diff options
Diffstat (limited to 'arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 41 |
1 files changed, 20 insertions, 21 deletions
diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi index 13821a0ff524..ed1b5a7a6067 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi @@ -91,11 +91,10 @@ gmacphyrst: reset-controller { compatible = "ti,syscon-reset"; #reset-cells = <1>; - ti,reset-bits = - <0xcc 12 0xcc 12 0 0 (ASSERT_CLEAR | - DEASSERT_SET|STATUS_NONE)>, - <0xcc 13 0xcc 13 0 0 (ASSERT_CLEAR | - DEASSERT_SET|STATUS_NONE)>; + ti,reset-bits = < + 0xcc 12 0xcc 12 0 0 (ASSERT_CLEAR | DEASSERT_SET | STATUS_NONE) + 0xcc 13 0xcc 13 0 0 (ASSERT_CLEAR | DEASSERT_SET | STATUS_NONE) + >; }; }; @@ -114,7 +113,7 @@ #size-cells = <1>; ranges = <0x0 0x8a20000 0x1000>; - usb2_phy1: usb2-phy@120 { + usb2_phy1: usb2_phy@120 { compatible = "hisilicon,hi3798cv200-usb2-phy"; reg = <0x120 0x4>; clocks = <&crg HISTB_USB2_PHY1_REF_CLK>; @@ -135,7 +134,7 @@ }; }; - usb2_phy2: usb2-phy@124 { + usb2_phy2: usb2_phy@124 { compatible = "hisilicon,hi3798cv200-usb2-phy"; reg = <0x124 0x4>; clocks = <&crg HISTB_USB2_PHY2_REF_CLK>; @@ -217,8 +216,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0x8b00000 0x1000>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sysctrl HISTB_UART0_CLK>; - clock-names = "apb_pclk"; + clocks = <&sysctrl HISTB_UART0_CLK>, <&sysctrl HISTB_UART0_CLK>; + clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; @@ -226,8 +225,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0x8b02000 0x1000>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&crg HISTB_UART2_CLK>; - clock-names = "apb_pclk"; + clocks = <&crg HISTB_UART2_CLK>, <&crg HISTB_UART2_CLK>; + clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; @@ -292,8 +291,8 @@ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; num-cs = <1>; cs-gpios = <&gpio7 1 0>; - clocks = <&crg HISTB_SPI0_CLK>; - clock-names = "apb_pclk"; + clocks = <&crg HISTB_SPI0_CLK>, <&crg HISTB_SPI0_CLK>; + clock-names = "sspclk", "apb_pclk"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -303,9 +302,9 @@ compatible = "snps,dw-mshc"; reg = <0x9820000 0x10000>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&crg HISTB_SDIO0_CIU_CLK>, - <&crg HISTB_SDIO0_BIU_CLK>; - clock-names = "ciu", "biu"; + clocks = <&crg HISTB_SDIO0_BIU_CLK>, + <&crg HISTB_SDIO0_CIU_CLK>; + clock-names = "biu", "ciu"; resets = <&crg 0x9c 4>; reset-names = "reset"; status = "disabled"; @@ -564,10 +563,10 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - bus-range = <0 15>; + bus-range = <0x00 0xff>; num-lanes = <1>; - ranges = <0x81000000 0x0 0x00000000 0x4f00000 0x0 0x100000 - 0x82000000 0x0 0x3000000 0x3000000 0x0 0x01f00000>; + ranges = <0x81000000 0x0 0x00000000 0x4f00000 0x0 0x100000>, + <0x82000000 0x0 0x3000000 0x3000000 0x0 0x01f00000>; interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; @@ -585,7 +584,7 @@ status = "disabled"; }; - ohci: ohci@9880000 { + ohci: usb@9880000 { compatible = "generic-ohci"; reg = <0x9880000 0x10000>; interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; @@ -600,7 +599,7 @@ status = "disabled"; }; - ehci: ehci@9890000 { + ehci: usb@9890000 { compatible = "generic-ehci"; reg = <0x9890000 0x10000>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; |