diff options
Diffstat (limited to 'arch/arm64/boot/dts/marvell/armada-8040-db.dts')
| -rw-r--r-- | arch/arm64/boot/dts/marvell/armada-8040-db.dts | 158 |
1 files changed, 125 insertions, 33 deletions
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts index 0d7b2ae46610..dba55baff20f 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts @@ -56,51 +56,58 @@ stdout-path = "serial0:115200n8"; }; - memory@00000000 { + memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; - cpm_reg_usb3_0_vbus: cpm-usb3-0-vbus { + aliases { + ethernet0 = &cp0_eth0; + ethernet1 = &cp0_eth2; + ethernet2 = &cp1_eth0; + ethernet3 = &cp1_eth1; + }; + + cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus { compatible = "regulator-fixed"; - regulator-name = "cpm-usb3h0-vbus"; + regulator-name = "cp0-usb3h0-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&expander0 0 GPIO_ACTIVE_HIGH>; }; - cpm_reg_usb3_1_vbus: cpm-usb3-1-vbus { + cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus { compatible = "regulator-fixed"; - regulator-name = "cpm-usb3h1-vbus"; + regulator-name = "cp0-usb3h1-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&expander0 1 GPIO_ACTIVE_HIGH>; }; - cpm_usb3_0_phy: cpm-usb3-0-phy { + cp0_usb3_0_phy: cp0-usb3-0-phy { compatible = "usb-nop-xceiv"; - vcc-supply = <&cpm_reg_usb3_0_vbus>; + vcc-supply = <&cp0_reg_usb3_0_vbus>; }; - cpm_usb3_1_phy: cpm-usb3-1-phy { + cp0_usb3_1_phy: cp0-usb3-1-phy { compatible = "usb-nop-xceiv"; - vcc-supply = <&cpm_reg_usb3_1_vbus>; + vcc-supply = <&cp0_reg_usb3_1_vbus>; }; - cps_reg_usb3_0_vbus: cps-usb3-0-vbus { + cp1_reg_usb3_0_vbus: cp1-usb3-0-vbus { compatible = "regulator-fixed"; - regulator-name = "cps-usb3h0-vbus"; + regulator-name = "cp1-usb3h0-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&expander1 0 GPIO_ACTIVE_HIGH>; }; - cps_usb3_0_phy: cps-usb3-0-phy { + cp1_usb3_0_phy: cp1-usb3-0-phy { compatible = "usb-nop-xceiv"; - vcc-supply = <&cps_reg_usb3_0_vbus>; + vcc-supply = <&cp1_reg_usb3_0_vbus>; }; }; @@ -139,15 +146,21 @@ /* Accessible over the mini-USB CON9 connector on the main board */ &uart0 { status = "okay"; + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; }; +/* CON6 on CP0 expansion */ +&cp0_pcie0 { + status = "okay"; +}; /* CON5 on CP0 expansion */ -&cpm_pcie2 { +&cp0_pcie2 { status = "okay"; }; -&cpm_i2c0 { +&cp0_i2c0 { status = "okay"; clock-frequency = <100000>; @@ -172,23 +185,23 @@ }; /* CON4 on CP0 expansion */ -&cpm_sata0 { +&cp0_sata0 { status = "okay"; }; /* CON9 on CP0 expansion */ -&cpm_usb3_0 { - usb-phy = <&cpm_usb3_0_phy>; +&cp0_usb3_0 { + usb-phy = <&cp0_usb3_0_phy>; status = "okay"; }; /* CON10 on CP0 expansion */ -&cpm_usb3_1 { - usb-phy = <&cpm_usb3_1_phy>; +&cp0_usb3_1 { + usb-phy = <&cp0_usb3_1_phy>; status = "okay"; }; -&cpm_mdio { +&cp0_mdio { status = "okay"; phy1: ethernet-phy@1 { @@ -196,43 +209,117 @@ }; }; -&cpm_ethernet { +&cp0_ethernet { status = "okay"; }; -&cpm_eth2 { +&cp0_eth0 { + status = "okay"; + phy-mode = "10gbase-kr"; +}; + +&cp0_eth2 { status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; }; +/* CON6 on CP1 expansion */ +&cp1_pcie0 { + status = "okay"; +}; + +/* CON7 on CP1 expansion */ +&cp1_pcie1 { + status = "okay"; +}; + /* CON5 on CP1 expansion */ -&cps_pcie2 { +&cp1_pcie2 { status = "okay"; }; -&cps_i2c0 { +&cp1_i2c0 { status = "okay"; clock-frequency = <100000>; }; +&cp1_spi1 { + status = "okay"; + + spi-flash@0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <20000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Boot"; + reg = <0x0 0x200000>; + }; + partition@200000 { + label = "Filesystem"; + reg = <0x200000 0xd00000>; + }; + partition@f00000 { + label = "Boot_2nd"; + reg = <0xf00000 0x100000>; + }; + }; + }; +}; + +/* + * Proper NAND usage will require DPR-76 to be in position 1-2, which disables + * MDIO signal of CP1. + */ +&cp1_nand { + num-cs = <1>; + pinctrl-0 = <&nand_pins>, <&nand_rb>; + pinctrl-names = "default"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + marvell,nand-enable-arbiter; + marvell,system-controller = <&cp1_syscon0>; + nand-on-flash-bbt; + + partition@0 { + label = "U-Boot"; + reg = <0 0x200000>; + }; + partition@200000 { + label = "Linux"; + reg = <0x200000 0xe00000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; +}; + /* CON4 on CP1 expansion */ -&cps_sata0 { +&cp1_sata0 { status = "okay"; }; /* CON9 on CP1 expansion */ -&cps_usb3_0 { - usb-phy = <&cps_usb3_0_phy>; +&cp1_usb3_0 { + usb-phy = <&cp1_usb3_0_phy>; status = "okay"; }; /* CON10 on CP1 expansion */ -&cps_usb3_1 { +&cp1_usb3_1 { status = "okay"; }; -&cps_mdio { +&cp1_mdio { status = "okay"; phy0: ethernet-phy@0 { @@ -240,11 +327,16 @@ }; }; -&cps_ethernet { +&cp1_ethernet { + status = "okay"; +}; + +&cp1_eth0 { status = "okay"; + phy-mode = "10gbase-kr"; }; -&cps_eth1 { +&cp1_eth1 { status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; @@ -256,7 +348,7 @@ non-removable; }; -&cpm_sdhci0 { +&cp0_sdhci0 { status = "okay"; bus-width = <8>; non-removable; |