diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/ipq9574.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/ipq9574.dtsi | 552 |
1 files changed, 489 insertions, 63 deletions
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi index 5f83ee42a719..942290028972 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi @@ -3,11 +3,13 @@ * IPQ9574 SoC device tree source * * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. - * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved. */ #include <dt-bindings/clock/qcom,apss-ipq.h> +#include <dt-bindings/clock/qcom,ipq-cmn-pll.h> #include <dt-bindings/clock/qcom,ipq9574-gcc.h> +#include <dt-bindings/interconnect/qcom,ipq9574.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/qcom,ipq9574-gcc.h> #include <dt-bindings/thermal/thermal.h> @@ -18,12 +20,24 @@ #size-cells = <2>; clocks { + ref_48mhz_clk: ref-48mhz-clk { + compatible = "fixed-factor-clock"; + clocks = <&xo_clk>; + #clock-cells = <0>; + }; + sleep_clk: sleep-clk { compatible = "fixed-clock"; #clock-cells = <0>; }; xo_board_clk: xo-board-clk { + compatible = "fixed-factor-clock"; + clocks = <&ref_48mhz_clk>; + #clock-cells = <0>; + }; + + xo_clk: xo-clk { compatible = "fixed-clock"; #clock-cells = <0>; }; @@ -33,12 +47,12 @@ #address-cells = <1>; #size-cells = <0>; - CPU0: cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a73"; reg = <0x0>; enable-method = "psci"; - next-level-cache = <&L2_0>; + next-level-cache = <&l2_0>; clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; @@ -46,12 +60,12 @@ #cooling-cells = <2>; }; - CPU1: cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a73"; reg = <0x1>; enable-method = "psci"; - next-level-cache = <&L2_0>; + next-level-cache = <&l2_0>; clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; @@ -59,12 +73,12 @@ #cooling-cells = <2>; }; - CPU2: cpu@2 { + cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a73"; reg = <0x2>; enable-method = "psci"; - next-level-cache = <&L2_0>; + next-level-cache = <&l2_0>; clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; @@ -72,12 +86,12 @@ #cooling-cells = <2>; }; - CPU3: cpu@3 { + cpu3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a73"; reg = <0x3>; enable-method = "psci"; - next-level-cache = <&L2_0>; + next-level-cache = <&l2_0>; clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; @@ -85,7 +99,7 @@ #cooling-cells = <2>; }; - L2_0: l2-cache { + l2_0: l2-cache { compatible = "cache"; cache-level = <2>; cache-unified; @@ -180,7 +194,7 @@ mboxes = <&apcs_glb 0>; rpm_requests: rpm-requests { - compatible = "qcom,rpm-ipq9574"; + compatible = "qcom,rpm-ipq9574", "qcom,glink-smd-rpm"; qcom,glink-channels = "rpm_requests"; }; }; @@ -225,13 +239,127 @@ reg = <0x00060000 0x6000>; }; + pcie0_phy: phy@84000 { + compatible = "qcom,ipq9574-qmp-gen3x1-pcie-phy"; + reg = <0x00084000 0x1000>; + + clocks = <&gcc GCC_PCIE0_AUX_CLK>, + <&gcc GCC_PCIE0_AHB_CLK>, + <&gcc GCC_PCIE0_PIPE_CLK>; + clock-names = "aux", "cfg_ahb", "pipe"; + + assigned-clocks = <&gcc GCC_PCIE0_AUX_CLK>; + assigned-clock-rates = <20000000>; + + resets = <&gcc GCC_PCIE0_PHY_BCR>, + <&gcc GCC_PCIE0PHY_PHY_BCR>; + reset-names = "phy", "common"; + + #clock-cells = <0>; + clock-output-names = "gcc_pcie0_pipe_clk_src"; + + #phy-cells = <0>; + status = "disabled"; + }; + + pcie2_phy: phy@8c000 { + compatible = "qcom,ipq9574-qmp-gen3x2-pcie-phy"; + reg = <0x0008c000 0x2000>; + + clocks = <&gcc GCC_PCIE2_AUX_CLK>, + <&gcc GCC_PCIE2_AHB_CLK>, + <&gcc GCC_PCIE2_PIPE_CLK>; + clock-names = "aux", "cfg_ahb", "pipe"; + + assigned-clocks = <&gcc GCC_PCIE2_AUX_CLK>; + assigned-clock-rates = <20000000>; + + resets = <&gcc GCC_PCIE2_PHY_BCR>, + <&gcc GCC_PCIE2PHY_PHY_BCR>; + reset-names = "phy", "common"; + + #clock-cells = <0>; + clock-output-names = "gcc_pcie2_pipe_clk_src"; + + #phy-cells = <0>; + status = "disabled"; + }; + rng: rng@e3000 { - compatible = "qcom,prng-ee"; + compatible = "qcom,ipq9574-trng", "qcom,trng"; reg = <0x000e3000 0x1000>; clocks = <&gcc GCC_PRNG_AHB_CLK>; clock-names = "core"; }; + mdio: mdio@90000 { + compatible = "qcom,ipq9574-mdio", "qcom,ipq4019-mdio"; + reg = <0x00090000 0x64>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_MDIO_AHB_CLK>; + clock-names = "gcc_mdio_ahb_clk"; + status = "disabled"; + }; + + pcie3_phy: phy@f4000 { + compatible = "qcom,ipq9574-qmp-gen3x2-pcie-phy"; + reg = <0x000f4000 0x2000>; + + clocks = <&gcc GCC_PCIE3_AUX_CLK>, + <&gcc GCC_PCIE3_AHB_CLK>, + <&gcc GCC_PCIE3_PIPE_CLK>; + clock-names = "aux", "cfg_ahb", "pipe"; + + assigned-clocks = <&gcc GCC_PCIE3_AUX_CLK>; + assigned-clock-rates = <20000000>; + + resets = <&gcc GCC_PCIE3_PHY_BCR>, + <&gcc GCC_PCIE3PHY_PHY_BCR>; + reset-names = "phy", "common"; + + #clock-cells = <0>; + clock-output-names = "gcc_pcie3_pipe_clk_src"; + + #phy-cells = <0>; + status = "disabled"; + }; + + pcie1_phy: phy@fc000 { + compatible = "qcom,ipq9574-qmp-gen3x1-pcie-phy"; + reg = <0x000fc000 0x1000>; + + clocks = <&gcc GCC_PCIE1_AUX_CLK>, + <&gcc GCC_PCIE1_AHB_CLK>, + <&gcc GCC_PCIE1_PIPE_CLK>; + clock-names = "aux", "cfg_ahb", "pipe"; + + assigned-clocks = <&gcc GCC_PCIE1_AUX_CLK>; + assigned-clock-rates = <20000000>; + + resets = <&gcc GCC_PCIE1_PHY_BCR>, + <&gcc GCC_PCIE1PHY_PHY_BCR>; + reset-names = "phy", "common"; + + #clock-cells = <0>; + clock-output-names = "gcc_pcie1_pipe_clk_src"; + + #phy-cells = <0>; + status = "disabled"; + }; + + cmn_pll: clock-controller@9b000 { + compatible = "qcom,ipq9574-cmn-pll"; + reg = <0x0009b000 0x800>; + clocks = <&ref_48mhz_clk>, + <&gcc GCC_CMN_12GPLL_AHB_CLK>, + <&gcc GCC_CMN_12GPLL_SYS_CLK>; + clock-names = "ref", "ahb", "sys"; + #clock-cells = <1>; + assigned-clocks = <&cmn_pll CMN_PLL_CLK>; + assigned-clock-rates-u64 = /bits/ 64 <12000000000>; + }; + qfprom: efuse@a4000 { compatible = "qcom,ipq9574-qfprom", "qcom,qfprom"; reg = <0x000a4000 0x5a1>; @@ -298,14 +426,14 @@ clocks = <&xo_board_clk>, <&sleep_clk>, <0>, - <0>, - <0>, - <0>, - <0>, + <&pcie0_phy>, + <&pcie1_phy>, + <&pcie2_phy>, + <&pcie3_phy>, <0>; #clock-cells = <1>; #reset-cells = <1>; - #power-domain-cells = <1>; + #interconnect-cells = <1>; }; tcsr_mutex: hwlock@1905000 { @@ -321,8 +449,10 @@ sdhc_1: mmc@7804000 { compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5"; - reg = <0x07804000 0x1000>, <0x07805000 0x1000>; - reg-names = "hc", "cqhci"; + reg = <0x07804000 0x1000>, + <0x07805000 0x1000>, + <0x07808000 0x2000>; + reg-names = "hc", "cqhci", "ice"; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; @@ -330,9 +460,11 @@ clocks = <&gcc GCC_SDCC1_AHB_CLK>, <&gcc GCC_SDCC1_APPS_CLK>, - <&xo_board_clk>; - clock-names = "iface", "core", "xo"; + <&xo_board_clk>, + <&gcc GCC_SDCC1_ICE_CORE_CLK>; + clock-names = "iface", "core", "xo", "ice"; non-removable; + supports-cqe; status = "disabled"; }; @@ -741,12 +873,330 @@ status = "disabled"; }; }; + + pcie1: pcie@10000000 { + compatible = "qcom,pcie-ipq9574"; + reg = <0x10000000 0xf1d>, + <0x10000f20 0xa8>, + <0x10001000 0x1000>, + <0x000f8000 0x4000>, + <0x10100000 0x1000>; + reg-names = "dbi", "elbi", "atu", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x10200000 0x0 0x100000>, + <0x02000000 0x0 0x10300000 0x10300000 0x0 0x7d00000>; + + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 35 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 49 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 84 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 85 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE1_AXI_M_CLK>, + <&gcc GCC_PCIE1_AXI_S_CLK>, + <&gcc GCC_PCIE1_AXI_S_BRIDGE_CLK>, + <&gcc GCC_PCIE1_RCHNG_CLK>, + <&gcc GCC_PCIE1_AHB_CLK>, + <&gcc GCC_PCIE1_AUX_CLK>; + clock-names = "axi_m", + "axi_s", + "axi_bridge", + "rchng", + "ahb", + "aux"; + + resets = <&gcc GCC_PCIE1_PIPE_ARES>, + <&gcc GCC_PCIE1_CORE_STICKY_ARES>, + <&gcc GCC_PCIE1_AXI_S_STICKY_ARES>, + <&gcc GCC_PCIE1_AXI_S_ARES>, + <&gcc GCC_PCIE1_AXI_M_STICKY_ARES>, + <&gcc GCC_PCIE1_AXI_M_ARES>, + <&gcc GCC_PCIE1_AUX_ARES>, + <&gcc GCC_PCIE1_AHB_ARES>; + reset-names = "pipe", + "sticky", + "axi_s_sticky", + "axi_s", + "axi_m_sticky", + "axi_m", + "aux", + "ahb"; + + phys = <&pcie1_phy>; + phy-names = "pciephy"; + interconnects = <&gcc MASTER_ANOC_PCIE1 &gcc SLAVE_ANOC_PCIE1>, + <&gcc MASTER_SNOC_PCIE1 &gcc SLAVE_SNOC_PCIE1>; + interconnect-names = "pcie-mem", "cpu-pcie"; + status = "disabled"; + }; + + pcie3: pcie@18000000 { + compatible = "qcom,pcie-ipq9574"; + reg = <0x18000000 0xf1d>, + <0x18000f20 0xa8>, + <0x18001000 0x1000>, + <0x000f0000 0x4000>, + <0x18100000 0x1000>; + reg-names = "dbi", "elbi", "atu", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <3>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x18200000 0x0 0x100000>, + <0x02000000 0x0 0x18300000 0x18300000 0x0 0x7d00000>; + + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 189 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 190 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 191 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 192 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE3_AXI_M_CLK>, + <&gcc GCC_PCIE3_AXI_S_CLK>, + <&gcc GCC_PCIE3_AXI_S_BRIDGE_CLK>, + <&gcc GCC_PCIE3_RCHNG_CLK>, + <&gcc GCC_PCIE3_AHB_CLK>, + <&gcc GCC_PCIE3_AUX_CLK>; + clock-names = "axi_m", + "axi_s", + "axi_bridge", + "rchng", + "ahb", + "aux"; + + resets = <&gcc GCC_PCIE3_PIPE_ARES>, + <&gcc GCC_PCIE3_CORE_STICKY_ARES>, + <&gcc GCC_PCIE3_AXI_S_STICKY_ARES>, + <&gcc GCC_PCIE3_AXI_S_ARES>, + <&gcc GCC_PCIE3_AXI_M_STICKY_ARES>, + <&gcc GCC_PCIE3_AXI_M_ARES>, + <&gcc GCC_PCIE3_AUX_ARES>, + <&gcc GCC_PCIE3_AHB_ARES>; + reset-names = "pipe", + "sticky", + "axi_s_sticky", + "axi_s", + "axi_m_sticky", + "axi_m", + "aux", + "ahb"; + + phys = <&pcie3_phy>; + phy-names = "pciephy"; + interconnects = <&gcc MASTER_ANOC_PCIE3 &gcc SLAVE_ANOC_PCIE3>, + <&gcc MASTER_SNOC_PCIE3 &gcc SLAVE_SNOC_PCIE3>; + interconnect-names = "pcie-mem", "cpu-pcie"; + status = "disabled"; + }; + + pcie2: pcie@20000000 { + compatible = "qcom,pcie-ipq9574"; + reg = <0x20000000 0xf1d>, + <0x20000f20 0xa8>, + <0x20001000 0x1000>, + <0x00088000 0x4000>, + <0x20100000 0x1000>; + reg-names = "dbi", "elbi", "atu", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <2>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x20200000 0x0 0x100000>, + <0x02000000 0x0 0x20300000 0x20300000 0x0 0x7d00000>; + + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 164 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 165 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 186 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 187 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE2_AXI_M_CLK>, + <&gcc GCC_PCIE2_AXI_S_CLK>, + <&gcc GCC_PCIE2_AXI_S_BRIDGE_CLK>, + <&gcc GCC_PCIE2_RCHNG_CLK>, + <&gcc GCC_PCIE2_AHB_CLK>, + <&gcc GCC_PCIE2_AUX_CLK>; + clock-names = "axi_m", + "axi_s", + "axi_bridge", + "rchng", + "ahb", + "aux"; + + resets = <&gcc GCC_PCIE2_PIPE_ARES>, + <&gcc GCC_PCIE2_CORE_STICKY_ARES>, + <&gcc GCC_PCIE2_AXI_S_STICKY_ARES>, + <&gcc GCC_PCIE2_AXI_S_ARES>, + <&gcc GCC_PCIE2_AXI_M_STICKY_ARES>, + <&gcc GCC_PCIE2_AXI_M_ARES>, + <&gcc GCC_PCIE2_AUX_ARES>, + <&gcc GCC_PCIE2_AHB_ARES>; + reset-names = "pipe", + "sticky", + "axi_s_sticky", + "axi_s", + "axi_m_sticky", + "axi_m", + "aux", + "ahb"; + + phys = <&pcie2_phy>; + phy-names = "pciephy"; + interconnects = <&gcc MASTER_ANOC_PCIE2 &gcc SLAVE_ANOC_PCIE2>, + <&gcc MASTER_SNOC_PCIE2 &gcc SLAVE_SNOC_PCIE2>; + interconnect-names = "pcie-mem", "cpu-pcie"; + status = "disabled"; + }; + + pcie0: pci@28000000 { + compatible = "qcom,pcie-ipq9574"; + reg = <0x28000000 0xf1d>, + <0x28000f20 0xa8>, + <0x28001000 0x1000>, + <0x00080000 0x4000>, + <0x28100000 0x1000>; + reg-names = "dbi", "elbi", "atu", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x28200000 0x0 0x100000>, + <0x02000000 0x0 0x28300000 0x28300000 0x0 0x7d00000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 75 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 78 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 79 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 83 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE0_AXI_M_CLK>, + <&gcc GCC_PCIE0_AXI_S_CLK>, + <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>, + <&gcc GCC_PCIE0_RCHNG_CLK>, + <&gcc GCC_PCIE0_AHB_CLK>, + <&gcc GCC_PCIE0_AUX_CLK>; + clock-names = "axi_m", + "axi_s", + "axi_bridge", + "rchng", + "ahb", + "aux"; + + resets = <&gcc GCC_PCIE0_PIPE_ARES>, + <&gcc GCC_PCIE0_CORE_STICKY_ARES>, + <&gcc GCC_PCIE0_AXI_S_STICKY_ARES>, + <&gcc GCC_PCIE0_AXI_S_ARES>, + <&gcc GCC_PCIE0_AXI_M_STICKY_ARES>, + <&gcc GCC_PCIE0_AXI_M_ARES>, + <&gcc GCC_PCIE0_AUX_ARES>, + <&gcc GCC_PCIE0_AHB_ARES>; + reset-names = "pipe", + "sticky", + "axi_s_sticky", + "axi_s", + "axi_m_sticky", + "axi_m", + "aux", + "ahb"; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + interconnects = <&gcc MASTER_ANOC_PCIE0 &gcc SLAVE_ANOC_PCIE0>, + <&gcc MASTER_SNOC_PCIE0 &gcc SLAVE_SNOC_PCIE0>; + interconnect-names = "pcie-mem", "cpu-pcie"; + status = "disabled"; + }; + }; thermal-zones { nss-top-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 3>; trips { @@ -759,8 +1209,6 @@ }; ubi-0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 4>; trips { @@ -773,8 +1221,6 @@ }; ubi-1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 5>; trips { @@ -787,8 +1233,6 @@ }; ubi-2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 6>; trips { @@ -801,8 +1245,6 @@ }; ubi-3-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 7>; trips { @@ -815,8 +1257,6 @@ }; cpuss0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 8>; trips { @@ -829,8 +1269,6 @@ }; cpuss1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 9>; trips { @@ -843,8 +1281,6 @@ }; cpu0-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 10>; trips { @@ -864,17 +1300,15 @@ cooling-maps { map0 { trip = <&cpu0_alert>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; cpu1-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 11>; trips { @@ -894,17 +1328,15 @@ cooling-maps { map0 { trip = <&cpu1_alert>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; cpu2-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 12>; trips { @@ -924,17 +1356,15 @@ cooling-maps { map0 { trip = <&cpu2_alert>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; cpu3-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 13>; trips { @@ -954,17 +1384,15 @@ cooling-maps { map0 { trip = <&cpu3_alert>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; wcss-phyb-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 14>; trips { @@ -977,8 +1405,6 @@ }; top-glue-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&tsens 15>; trips { |