summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi')
-rw-r--r--arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi485
1 files changed, 485 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi
new file mode 100644
index 000000000000..7a7e99b015d9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-fortuna-common.dtsi
@@ -0,0 +1,485 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+ aliases {
+ mmc0 = &sdhc_1; /* eMMC */
+ mmc1 = &sdhc_2; /* SD card */
+ serial0 = &blsp_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ reserved-memory {
+ /* Additional memory used by Samsung firmware modifications */
+ tz-apps@85a00000 {
+ reg = <0x0 0x85a00000 0x0 0x600000>;
+ no-map;
+ };
+ };
+
+ battery: battery {
+ compatible = "simple-battery";
+ precharge-current-microamp = <450000>;
+ precharge-upper-limit-microvolt = <3500000>;
+ };
+
+ clk_pwm_backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&clk_pwm 0 100000>;
+
+ enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
+
+ brightness-levels = <0 255>;
+ num-interpolated-steps = <255>;
+ default-brightness-level = <128>;
+
+ pinctrl-0 = <&backlight_en_default>;
+ pinctrl-names = "default";
+ };
+
+ clk_pwm: pwm {
+ compatible = "clk-pwm";
+ #pwm-cells = <2>;
+
+ clocks = <&gcc GCC_GP2_CLK>;
+
+ pinctrl-0 = <&backlight_pwm_default>;
+ pinctrl-names = "default";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&gpio_keys_default>;
+ pinctrl-names = "default";
+
+ label = "GPIO Buttons";
+
+ button-volume-up {
+ label = "Volume Up";
+ gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ button-home {
+ label = "Home";
+ gpios = <&tlmm 109 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOMEPAGE>;
+ };
+ };
+
+ haptic {
+ compatible = "regulator-haptic";
+ haptic-supply = <&reg_motor_vdd>;
+ min-microvolt = <3300000>;
+ max-microvolt = <3300000>;
+ };
+
+ i2c_nfc: i2c-nfc {
+ compatible = "i2c-gpio";
+ sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+ pinctrl-0 = <&nfc_i2c_default>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ s3fwrn5_nfc: nfc@27 {
+ compatible = "samsung,s3fwrn5-i2c";
+ reg = <0x27>;
+
+ interrupts-extended = <&tlmm 21 IRQ_TYPE_EDGE_RISING>;
+
+ en-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+ wake-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
+
+ clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>;
+
+ pinctrl-0 = <&nfc_default>, <&nfc_clk_req>;
+ pinctrl-names = "default";
+
+ status = "disabled";
+ };
+ };
+
+ reg_motor_vdd: regulator-motor-vdd {
+ compatible = "regulator-fixed";
+ regulator-name = "motor_vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 72 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&motor_en_default>;
+ pinctrl-names = "default";
+ };
+
+ reg_vdd_tsp_a: regulator-vdd-tsp-a {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_tsp_a";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+
+ gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&tsp_en_default>;
+ pinctrl-names = "default";
+ };
+};
+
+&blsp_i2c1 {
+ status = "okay";
+
+ muic: extcon@25 {
+ compatible = "siliconmitus,sm5502-muic";
+ reg = <0x25>;
+ interrupts-extended = <&tlmm 12 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-0 = <&muic_int_default>;
+ pinctrl-names = "default";
+
+ usb_con: connector {
+ compatible = "usb-b-connector";
+ label = "micro-USB";
+ type = "micro";
+ };
+ };
+};
+
+&blsp_i2c2 {
+ /* Available sensors vary depending on model variant */
+ status = "okay";
+
+ bosch_accel: accelerometer@10 {
+ compatible = "bosch,bmc150_accel";
+ reg = <0x10>;
+ interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_RISING>;
+
+ vdd-supply = <&pm8916_l5>;
+ vddio-supply = <&pm8916_l5>;
+
+ pinctrl-0 = <&accel_int_default>;
+ pinctrl-names = "default";
+
+ mount-matrix = "0", "-1", "0",
+ "-1", "0", "0",
+ "0", "0", "1";
+
+ status = "disabled";
+ };
+
+ bosch_magn: magnetometer@12 {
+ compatible = "bosch,bmc150_magn";
+ reg = <0x12>;
+
+ vdd-supply = <&pm8916_l5>;
+ vddio-supply = <&pm8916_l5>;
+
+ mount-matrix = "0", "-1", "0",
+ "-1", "0", "0",
+ "0", "0", "1";
+
+ status = "disabled";
+ };
+
+ st_accel: accelerometer@1d {
+ compatible = "st,lsm303c-accel";
+ reg = <0x1d>;
+ interrupts-extended = <&tlmm 115 IRQ_TYPE_LEVEL_HIGH>;
+
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l5>;
+
+ pinctrl-0 = <&accel_int_default>;
+ pinctrl-names = "default";
+
+ st,drdy-int-pin = <1>;
+ mount-matrix = "0", "-1", "0",
+ "1", "0", "0",
+ "0", "0", "-1";
+
+ status = "disabled";
+ };
+
+ st_magn: magnetometer@1e {
+ compatible = "st,lsm303c-magn";
+ reg = <0x1e>;
+
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l5>;
+
+ mount-matrix = "0", "-1", "0",
+ "1", "0", "0",
+ "0", "0", "-1";
+
+ status = "disabled";
+ };
+};
+
+&blsp_i2c4 {
+ status = "okay";
+
+ fuel-gauge@35 {
+ compatible = "richtek,rt5033-battery";
+ reg = <0x35>;
+
+ interrupts-extended = <&tlmm 121 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-0 = <&fg_alert_default>;
+ pinctrl-names = "default";
+
+ power-supplies = <&charger>;
+ };
+};
+
+&blsp_i2c5 {
+ status = "okay";
+
+ touchscreen: touchscreen@20 {
+ compatible = "zinitix,bt541";
+ reg = <0x20>;
+
+ interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
+
+ touchscreen-size-x = <540>;
+ touchscreen-size-y = <960>;
+
+ vcca-supply = <&reg_vdd_tsp_a>;
+ vdd-supply = <&pm8916_l6>;
+
+ pinctrl-0 = <&tsp_int_default>;
+ pinctrl-names = "default";
+
+ linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+ };
+};
+
+&blsp_i2c6 {
+ status = "okay";
+
+ pmic@34 {
+ compatible = "richtek,rt5033";
+ reg = <0x34>;
+
+ interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-0 = <&pmic_int_default>;
+ pinctrl-names = "default";
+
+ regulators {
+ rt5033_reg_safe_ldo: SAFE_LDO {
+ regulator-min-microvolt = <4900000>;
+ regulator-max-microvolt = <4900000>;
+ regulator-always-on;
+ };
+
+ /*
+ * Needed for camera, but not used yet.
+ * Define empty nodes to allow disabling the unused
+ * regulators.
+ */
+ LDO {};
+ BUCK {};
+ };
+
+ charger: charger {
+ compatible = "richtek,rt5033-charger";
+ monitored-battery = <&battery>;
+ richtek,usb-connector = <&usb_con>;
+ };
+ };
+};
+
+&blsp_uart2 {
+ status = "okay";
+};
+
+&mpss_mem {
+ reg = <0x0 0x86800000 0x0 0x5000000>;
+};
+
+&pm8916_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&pm8916_rpm_regulators {
+ pm8916_l17: l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+};
+
+&sdhc_1 {
+ status = "okay";
+};
+
+&sdhc_2 {
+ pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+ pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+ pinctrl-names = "default", "sleep";
+
+ cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+};
+
+&sound {
+ model = "msm8916-1mic";
+ audio-routing =
+ "AMIC1", "MIC BIAS External1",
+ "AMIC2", "MIC BIAS Internal2",
+ "AMIC3", "MIC BIAS External1";
+};
+
+&usb {
+ extcon = <&muic>, <&muic>;
+ status = "okay";
+};
+
+&usb_hs_phy {
+ extcon = <&muic>;
+};
+
+&venus {
+ status = "okay";
+};
+
+&venus_mem {
+ status = "okay";
+};
+
+&wcnss {
+ status = "okay";
+};
+
+&wcnss_iris {
+ compatible = "qcom,wcn3620";
+};
+
+&wcnss_mem {
+ status = "okay";
+};
+
+&tlmm {
+ accel_int_default: accel-int-default-state {
+ pins = "gpio115";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ backlight_en_default: backlight-en-default-state {
+ pins = "gpio98";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ backlight_pwm_default: backlight-pwm-default-state {
+ pins = "gpio50";
+ function = "gcc_gp2_clk_a";
+ };
+
+ fg_alert_default: fg-alert-default-state {
+ pins = "gpio121";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ gpio_keys_default: gpio-keys-default-state {
+ pins = "gpio107", "gpio109";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ motor_en_default: motor-en-default-state {
+ pins = "gpio72";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ muic_int_default: muic-int-default-state {
+ pins = "gpio12";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ nfc_default: nfc-default-state {
+ irq-pins {
+ pins = "gpio21";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ nfc-pins {
+ pins = "gpio20", "gpio49";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ nfc_i2c_default: nfc-i2c-default-state {
+ pins = "gpio0", "gpio1";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pmic_int_default: pmic-int-default-state {
+ pins = "gpio62";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ sdc2_cd_default: sdc2-cd-default-state {
+ pins = "gpio38";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ tsp_en_default: tsp-en-default-state {
+ pins = "gpio73";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ tsp_int_default: tsp-int-default-state {
+ pins = "gpio13";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&pm8916_gpios {
+ nfc_clk_req: nfc-clk-req-state {
+ pins = "gpio2";
+ function = "func1";
+ power-source = <PM8916_GPIO_L2>;
+ bias-disable;
+ input-enable;
+ };
+};
generated by cgit (git 2.34.1) at 2025-07-24 15:00:54 +0000