diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/pm8916.dtsi')
-rw-r--r-- | arch/arm64/boot/dts/qcom/pm8916.dtsi | 159 |
1 files changed, 115 insertions, 44 deletions
diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index 9dd2df1cbf47..4b2e8fb47d2d 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -1,24 +1,17 @@ // SPDX-License-Identifier: GPL-2.0 #include <dt-bindings/iio/qcom,spmi-vadc.h> -#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> &spmi_bus { - pm8916_0: pm8916@0 { + pm8916_0: pmic@0 { compatible = "qcom,pm8916", "qcom,spmi-pmic"; reg = <0x0 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; - rtc@6000 { - compatible = "qcom,pm8941-rtc"; - reg = <0x6000>; - reg-names = "rtc", "alarm"; - interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; - }; - pon@800 { compatible = "qcom,pm8916-pon"; reg = <0x800>; @@ -33,6 +26,14 @@ linux,code = <KEY_POWER>; }; + pm8916_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; + watchdog { compatible = "qcom,pm8916-wdt"; interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>; @@ -40,26 +41,41 @@ }; }; - pm8916_gpios: gpios@c000 { - compatible = "qcom,pm8916-gpio"; - reg = <0xc000>; - gpio-controller; - #gpio-cells = <2>; - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, - <0 0xc1 0 IRQ_TYPE_NONE>, - <0 0xc2 0 IRQ_TYPE_NONE>, - <0 0xc3 0 IRQ_TYPE_NONE>; + pm8916_charger: charger@1000 { + compatible = "qcom,pm8916-lbc"; + reg = <0x1000>, <0x1200>, <0x1300>, <0x1600>; + reg-names = "chgr", "bat_if", "usb", "misc"; + + interrupts = <0x0 0x10 0 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 6 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 0 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 4 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "vbat_det", + "fast_chg", + "chg_fail", + "chg_done", + "bat_pres", + "temp_ok", + "coarse_det", + "usb_vbus", + "chg_gone", + "overtemp"; + + status = "disabled"; }; - pm8916_mpps: mpps@a000 { - compatible = "qcom,pm8916-mpp"; - reg = <0xa000>; - gpio-controller; - #gpio-cells = <2>; - interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, - <0 0xa1 0 IRQ_TYPE_NONE>, - <0 0xa2 0 IRQ_TYPE_NONE>, - <0 0xa3 0 IRQ_TYPE_NONE>; + pm8916_usbin: usb-detect@1300 { + compatible = "qcom,pm8941-misc"; + reg = <0x1300>; + interrupts = <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "usb_vbus"; + status = "disabled"; }; pm8916_temp: temp-alarm@2400 { @@ -71,7 +87,7 @@ #thermal-sensor-cells = <0>; }; - pm8916_vadc: vadc@3100 { + pm8916_vadc: adc@3100 { compatible = "qcom,spmi-vadc"; reg = <0x3100>; interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; @@ -79,44 +95,101 @@ #size-cells = <0>; #io-channel-cells = <1>; - usb_in { + channel@0 { reg = <VADC_USBIN>; qcom,pre-scaling = <1 10>; }; - vph_pwr { + channel@7 { reg = <VADC_VSYS>; qcom,pre-scaling = <1 3>; }; - die_temp { + channel@8 { reg = <VADC_DIE_TEMP>; }; - ref_625mv { + channel@9 { reg = <VADC_REF_625MV>; }; - ref_1250v { + channel@a { reg = <VADC_REF_1250MV>; }; - ref_gnd { + channel@e { reg = <VADC_GND_REF>; }; - ref_vdd { + channel@f { reg = <VADC_VDD_VADC>; }; }; + + pm8916_bms: battery@4000 { + compatible = "qcom,pm8916-bms-vm"; + reg = <0x4000>; + interrupts = <0x0 0x40 0 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 1 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 2 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 3 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 4 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 5 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "cv_leave", + "cv_enter", + "ocv_good", + "ocv_thr", + "fifo", + "state_chg"; + + status = "disabled"; + }; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pm8916_mpps: mpps@a000 { + compatible = "qcom,pm8916-mpp", "qcom,spmi-mpp"; + reg = <0xa000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8916_mpps 0 0 4>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pm8916_gpios: gpio@c000 { + compatible = "qcom,pm8916-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm8916_gpios 0 0 4>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; }; - pm8916_1: pm8916@1 { + pm8916_1: pmic@1 { compatible = "qcom,pm8916", "qcom,spmi-pmic"; reg = <0x1 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; - wcd_codec: codec@f000 { + pm8916_pwm: pwm { + compatible = "qcom,pm8916-pwm"; + + #pwm-cells = <2>; + + status = "disabled"; + }; + + pm8916_vib: vibrator@c000 { + compatible = "qcom,pm8916-vib"; + reg = <0xc000>; + status = "disabled"; + }; + + pm8916_codec: audio-codec@f000 { compatible = "qcom,pm8916-wcd-analog-codec"; - reg = <0xf000 0x200>; - reg-names = "pmic-codec-core"; - clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; - clock-names = "mclk"; + reg = <0xf000>; interrupt-parent = <&spmi_bus>; interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>, <0x1 0xf0 0x1 IRQ_TYPE_NONE>, @@ -146,10 +219,8 @@ "cdc_ear_cnp_int", "cdc_hphr_cnp_int", "cdc_hphl_cnp_int"; - vdd-cdc-io-supply = <&pm8916_l5>; - vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>; - vdd-micbias-supply = <&pm8916_l13>; #sound-dai-cells = <1>; + status = "disabled"; }; }; }; |