diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/pm8994.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/pm8994.dtsi | 135 |
1 files changed, 99 insertions, 36 deletions
diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi index 76b5a3e6a2b5..d44a95caf04a 100644 --- a/arch/arm64/boot/dts/qcom/pm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi @@ -1,7 +1,32 @@ // SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> -#include <dt-bindings/input/linux-event-codes.h> + +/ { + thermal-zones { + pm8994-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&pm8994_temp>; + + trips { + pm8994_alert0: pm8994-alert0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + pm8994_crit: pm8994-crit { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; +}; &spmi_bus { @@ -18,9 +43,8 @@ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; - pon@800 { + pm8994_pon: pon@800 { compatible = "qcom,pm8916-pon"; - reg = <0x800>; mode-bootloader = <0x2>; mode-recovery = <0x1>; @@ -33,50 +57,75 @@ linux,code = <KEY_POWER>; }; + pm8994_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; + }; + + pm8994_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm8994_vadc VADC_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; }; - pm8994_gpios: gpios@c000 { - compatible = "qcom,pm8994-gpio"; + pm8994_vadc: adc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + channel@7 { + reg = <VADC_VSYS>; + qcom,pre-scaling = <1 3>; + label = "vph_pwr"; + }; + channel@8 { + reg = <VADC_DIE_TEMP>; + label = "die_temp"; + }; + channel@9 { + reg = <VADC_REF_625MV>; + label = "ref_625mv"; + }; + channel@a { + reg = <VADC_REF_1250MV>; + label = "ref_1250mv"; + }; + channel@e { + reg = <VADC_GND_REF>; + }; + channel@f { + reg = <VADC_VDD_VADC>; + }; + }; + + pm8994_gpios: gpio@c000 { + compatible = "qcom,pm8994-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; + gpio-ranges = <&pm8994_gpios 0 0 22>; #gpio-cells = <2>; - interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, - <0 0xc1 0 IRQ_TYPE_NONE>, - <0 0xc2 0 IRQ_TYPE_NONE>, - <0 0xc3 0 IRQ_TYPE_NONE>, - <0 0xc4 0 IRQ_TYPE_NONE>, - <0 0xc5 0 IRQ_TYPE_NONE>, - <0 0xc6 0 IRQ_TYPE_NONE>, - <0 0xc7 0 IRQ_TYPE_NONE>, - <0 0xc8 0 IRQ_TYPE_NONE>, - <0 0xc9 0 IRQ_TYPE_NONE>, - <0 0xca 0 IRQ_TYPE_NONE>, - <0 0xcb 0 IRQ_TYPE_NONE>, - <0 0xcc 0 IRQ_TYPE_NONE>, - <0 0xcd 0 IRQ_TYPE_NONE>, - <0 0xce 0 IRQ_TYPE_NONE>, - <0 0xcf 0 IRQ_TYPE_NONE>, - <0 0xd0 0 IRQ_TYPE_NONE>, - <0 0xd1 0 IRQ_TYPE_NONE>, - <0 0xd2 0 IRQ_TYPE_NONE>, - <0 0xd3 0 IRQ_TYPE_NONE>, - <0 0xd4 0 IRQ_TYPE_NONE>, - <0 0xd5 0 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; }; pm8994_mpps: mpps@a000 { - compatible = "qcom,pm8994-mpp"; + compatible = "qcom,pm8994-mpp", "qcom,spmi-mpp"; reg = <0xa000>; gpio-controller; #gpio-cells = <2>; - interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, - <0 0xa1 0 IRQ_TYPE_NONE>, - <0 0xa2 0 IRQ_TYPE_NONE>, - <0 0xa3 0 IRQ_TYPE_NONE>, - <0 0xa4 0 IRQ_TYPE_NONE>, - <0 0xa5 0 IRQ_TYPE_NONE>, - <0 0xa6 0 IRQ_TYPE_NONE>, - <0 0xa7 0 IRQ_TYPE_NONE>; + gpio-ranges = <&pm8994_mpps 0 0 8>; + interrupt-controller; + #interrupt-cells = <2>; }; }; @@ -85,5 +134,19 @@ reg = <0x1 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + pm8994_lpg: pwm { + compatible = "qcom,pm8994-lpg"; + + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <2>; + + status = "disabled"; + }; + + pm8994_spmi_regulators: regulators { + compatible = "qcom,pm8994-regulators"; + }; }; }; |