diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 813 |
1 files changed, 806 insertions, 7 deletions
diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts index 97824c769ba3..5fbcd48f2e2d 100644 --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: BSD-3-Clause /* - * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2023-2024 Qualcomm Innovation Center, Inc. All rights reserved. */ /dts-v1/; @@ -9,6 +9,10 @@ #define PM7250B_SID 8 #define PM7250B_SID1 9 +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sc7280.dtsi" #include "pm7250b.dtsi" @@ -17,7 +21,6 @@ #include "pmk8350.dtsi" /delete-node/ &ipa_fw_mem; -/delete-node/ &remoteproc_mpss; /delete-node/ &rmtfs_mem; /delete-node/ &adsp_mem; /delete-node/ &cdsp_mem; @@ -33,12 +36,46 @@ aliases { serial0 = &uart5; + serial1 = &uart7; }; chosen { stdout-path = "serial0:115200n8"; }; + dp-connector { + compatible = "dp-connector"; + label = "DP"; + type = "mini"; + + hpd-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>; + + port { + dp_connector_in: endpoint { + remote-endpoint = <&mdss_edp_out>; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <<9611_out>; + }; + }; + }; + + lt9611_1v2: lt9611-vdd12-regulator { + compatible = "regulator-fixed"; + regulator-name = "LT9611_1V2"; + + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + reserved-memory { xbl_mem: xbl@80700000 { reg = <0x0 0x80700000 0x0 0x100000>; @@ -121,12 +158,165 @@ }; }; + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&kypd_vol_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + linux,can-disable; + }; + }; + + pmic-glink { + compatible = "qcom,qcm6490-pmic-glink", "qcom,pmic-glink"; + + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 140 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&redriver_usb_con_ss>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_sbu_in: endpoint { + remote-endpoint = <&redriver_usb_con_sbu>; + }; + }; + }; + }; + }; + + thermal-zones { + sdm-skin-thermal { + thermal-sensors = <&pmk8350_adc_tm 3>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + quiet-thermal { + thermal-sensors = <&pmk8350_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + xo-thermal { + thermal-sensors = <&pmk8350_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; regulator-min-microvolt = <3700000>; regulator-max-microvolt = <3700000>; }; + + wcn6750-pmu { + compatible = "qcom,wcn6750-pmu"; + pinctrl-0 = <&bt_en>; + pinctrl-names = "default"; + vddaon-supply = <&vreg_s7b_0p972>; + vddasd-supply = <&vreg_l11c_2p8>; + vddpmu-supply = <&vreg_s7b_0p972>; + vddrfa0p8-supply = <&vreg_s7b_0p972>; + vddrfa1p2-supply = <&vreg_s8b_1p272>; + vddrfa1p7-supply = <&vreg_s1b_1p872>; + vddrfa2p2-supply = <&vreg_s1c_2p19>; + + bt-enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p7: ldo7 { + regulator-name = "vreg_pmu_rfa_1p7"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; }; &apps_rsc { @@ -153,129 +343,154 @@ vdd-l14-l16-supply = <&vreg_s8b_1p272>; vreg_s1b_1p872: smps1 { + regulator-name = "vreg_s1b_1p872"; regulator-min-microvolt = <1840000>; regulator-max-microvolt = <2040000>; }; vreg_s2b_0p876: smps2 { + regulator-name = "vreg_s2b_0p876"; regulator-min-microvolt = <570070>; regulator-max-microvolt = <1050000>; }; vreg_s7b_0p972: smps7 { + regulator-name = "vreg_s7b_0p972"; regulator-min-microvolt = <535000>; regulator-max-microvolt = <1120000>; }; vreg_s8b_1p272: smps8 { + regulator-name = "vreg_s8b_1p272"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1500000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>; }; vreg_l1b_0p912: ldo1 { + regulator-name = "vreg_l1b_0p912"; regulator-min-microvolt = <825000>; regulator-max-microvolt = <925000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l2b_3p072: ldo2 { + regulator-name = "vreg_l2b_3p072"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l3b_0p504: ldo3 { + regulator-name = "vreg_l3b_0p504"; regulator-min-microvolt = <312000>; regulator-max-microvolt = <910000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l4b_0p752: ldo4 { + regulator-name = "vreg_l4b_0p752"; regulator-min-microvolt = <752000>; regulator-max-microvolt = <820000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; reg_l5b_0p752: ldo5 { + regulator-name = "reg_l5b_0p752"; regulator-min-microvolt = <552000>; regulator-max-microvolt = <832000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l6b_1p2: ldo6 { + regulator-name = "vreg_l6b_1p2"; regulator-min-microvolt = <1140000>; regulator-max-microvolt = <1260000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l7b_2p952: ldo7 { - regulator-min-microvolt = <2400000>; - regulator-max-microvolt = <3544000>; + regulator-name = "vreg_l7b_2p952"; + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <2952000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l8b_0p904: ldo8 { + regulator-name = "vreg_l8b_0p904"; regulator-min-microvolt = <870000>; regulator-max-microvolt = <970000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l9b_1p2: ldo9 { + regulator-name = "vreg_l9b_1p2"; regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1304000>; + regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l11b_1p504: ldo11 { + regulator-name = "vreg_l11b_1p504"; regulator-min-microvolt = <1504000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l12b_0p751: ldo12 { + regulator-name = "vreg_l12b_0p751"; regulator-min-microvolt = <751000>; regulator-max-microvolt = <824000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l13b_0p53: ldo13 { + regulator-name = "vreg_l13b_0p53"; regulator-min-microvolt = <530000>; regulator-max-microvolt = <824000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l14b_1p08: ldo14 { + regulator-name = "vreg_l14b_1p08"; regulator-min-microvolt = <1080000>; regulator-max-microvolt = <1304000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l15b_0p765: ldo15 { + regulator-name = "vreg_l15b_0p765"; regulator-min-microvolt = <765000>; regulator-max-microvolt = <1020000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l16b_1p1: ldo16 { + regulator-name = "vreg_l16b_1p1"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1300000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l17b_1p7: ldo17 { + regulator-name = "vreg_l17b_1p7"; regulator-min-microvolt = <1700000>; regulator-max-microvolt = <1900000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l18b_1p8: ldo18 { + regulator-name = "vreg_l18b_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l19b_1p8: ldo19 { + regulator-name = "vreg_l19b_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; @@ -304,109 +519,128 @@ vdd-bob-supply = <&vph_pwr>; vreg_s1c_2p19: smps1 { + regulator-name = "vreg_s1c_2p19"; regulator-min-microvolt = <2190000>; regulator-max-microvolt = <2210000>; }; vreg_s2c_0p752: smps2 { + regulator-name = "vreg_s2c_0p752"; regulator-min-microvolt = <750000>; regulator-max-microvolt = <800000>; }; vreg_s5c_0p752: smps5 { + regulator-name = "vreg_s5c_0p752"; regulator-min-microvolt = <465000>; regulator-max-microvolt = <1050000>; }; vreg_s7c_0p752: smps7 { + regulator-name = "vreg_s7c_0p752"; regulator-min-microvolt = <465000>; regulator-max-microvolt = <800000>; }; vreg_s9c_1p084: smps9 { + regulator-name = "vreg_s9c_1p084"; regulator-min-microvolt = <1010000>; regulator-max-microvolt = <1170000>; }; vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1980000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l2c_1p62: ldo2 { + regulator-name = "vreg_l2c_1p62"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <1980000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l3c_2p8: ldo3 { + regulator-name = "vreg_l3c_2p8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3540000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l4c_1p62: ldo4 { + regulator-name = "vreg_l4c_1p62"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <3300000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l5c_1p62: ldo5 { + regulator-name = "vreg_l5c_1p62"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <3300000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l6c_2p96: ldo6 { + regulator-name = "vreg_l6c_2p96"; regulator-min-microvolt = <1650000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l7c_3p0: ldo7 { + regulator-name = "vreg_l7c_3p0"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l8c_1p62: ldo8 { + regulator-name = "vreg_l8c_1p62"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l9c_2p96: ldo9 { + regulator-name = "vreg_l9c_2p96"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <35440000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l10c_0p88: ldo10 { + regulator-name = "vreg_l10c_0p88"; regulator-min-microvolt = <720000>; regulator-max-microvolt = <1050000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l11c_2p8: ldo11 { + regulator-name = "vreg_l11c_2p8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l12c_1p65: ldo12 { + regulator-name = "vreg_l12c_1p65"; regulator-min-microvolt = <1650000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l13c_2p7: ldo13 { + regulator-name = "vreg_l13c_2p7"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <3544000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_bob_3p296: bob { + regulator-name = "vreg_bob_3p296"; regulator-min-microvolt = <3008000>; regulator-max-microvolt = <3960000>; }; @@ -430,26 +664,483 @@ <GCC_WPSS_RSCP_CLK>; }; +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/qcs6490/a660_zap.mbn"; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + lt9611_codec: hdmi-bridge@2b { + compatible = "lontium,lt9611uxc"; + reg = <0x2b>; + + interrupts-extended = <&tlmm 24 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&pm7250b_gpios 2 GPIO_ACTIVE_HIGH>; + + vdd-supply = <<9611_1v2>; + vcc-supply = <&vreg_l11c_2p8>; + + pinctrl-names = "default"; + pinctrl-0 = <<9611_irq_pin <9611_rst_pin>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt9611_a: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@2 { + reg = <2>; + + lt9611_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + status = "okay"; + + typec-mux@1c { + compatible = "onnn,nb7vpq904m"; + reg = <0x1c>; + + vcc-supply = <&vreg_l18b_1p8>; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + redriver_usb_con_ss: endpoint { + remote-endpoint = <&pmic_glink_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + redriver_phy_con_ss: endpoint { + remote-endpoint = <&usb_dp_qmpphy_out>; + data-lanes = <0 1 2 3>; + }; + }; + + port@2 { + reg = <2>; + + redriver_usb_con_sbu: endpoint { + remote-endpoint = <&pmic_glink_sbu_in>; + }; + }; + }; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp { + status = "okay"; +}; + +&mdss_dp_out { + data-lanes = <0 1>; + remote-endpoint = <&usb_dp_qmpphy_dp_in>; +}; + +&mdss_dsi { + vdda-supply = <&vreg_l6b_1p2>; + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi_phy { + vdds-supply = <&vreg_l10c_0p88>; + status = "okay"; +}; + +&mdss_edp { + status = "okay"; +}; + +&mdss_edp_out { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + + remote-endpoint = <&dp_connector_in>; +}; + +&mdss_edp_phy { + status = "okay"; +}; + +&pcie1 { + perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>; + pinctrl-names = "default"; + + iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, + <0x100 &apps_smmu 0x1c81 0x1>, + <0x208 &apps_smmu 0x1c84 0x1>, + <0x210 &apps_smmu 0x1c85 0x1>, + <0x218 &apps_smmu 0x1c86 0x1>, + <0x300 &apps_smmu 0x1c87 0x1>, + <0x400 &apps_smmu 0x1c88 0x1>, + <0x500 &apps_smmu 0x1c89 0x1>, + <0x501 &apps_smmu 0x1c90 0x1>; + + status = "okay"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l10c_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + status = "okay"; +}; + +&pm7325_gpios { + kypd_vol_up_n: kypd-vol-up-n-state { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + +&pm7325_temp_alarm { + io-channels = <&pmk8350_vadc PM7325_ADC7_DIE_TEMP>; + io-channel-names = "thermal"; +}; + +&pmk8350_adc_tm { + status = "okay"; + + xo-therm@0 { + reg = <0>; + io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + quiet-therm@1 { + reg = <1>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + sdm-skin-therm@3 { + reg = <3>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm8350c_pwm { + nvmem = <&pmk8350_sdam_21>, + <&pmk8350_sdam_22>; + nvmem-names = "lpg_chan_sdam", + "lut_sdam"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <3>; + linux,default-trigger = "none"; + default-state = "off"; + panic-indicator; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; + linux,default-trigger = "none"; + default-state = "off"; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; + linux,default-trigger = "none"; + default-state = "off"; + }; +}; + +&pmk8350_rtc { + status = "okay"; +}; + +&pmk8350_vadc { + channel@3 { + reg = <PMK8350_ADC7_DIE_TEMP>; + label = "pmk8350_die_temp"; + qcom,pre-scaling = <1 1>; + }; + + channel@44 { + reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; + label = "xo_therm"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; + + channel@103 { + reg = <PM7325_ADC7_DIE_TEMP>; + label = "pm7325_die_temp"; + qcom,pre-scaling = <1 1>; + }; + + channel@144 { + reg = <PM7325_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm7325_quiet_therm"; + }; + + channel@146 { + reg = <PM7325_ADC7_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm7325_sdm_skin_therm"; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + + status = "okay"; +}; + +&qup_uart7_cts { + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; +}; + +&qup_uart7_rts { + /* We'll drive RTS, so no pull */ + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + bias-pull-up; +}; + +&qup_uart7_tx { + /* We'll drive TX, so no pull */ + drive-strength = <2>; + bias-disable; +}; + &qupv3_id_0 { status = "okay"; }; +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/qcs6490/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/qcs6490/cdsp.mbn"; + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/qcs6490/modem.mbn"; + status = "okay"; +}; + +&remoteproc_wpss { + firmware-name = "qcom/qcs6490/wpss.mbn"; + status = "okay"; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>; + pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>; + + vmmc-supply = <&vreg_l9c_2p96>; + vqmmc-supply = <&vreg_l6c_2p96>; + + cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + &tlmm { gpio-reserved-ranges = <32 2>, /* ADSP */ <48 4>; /* NFC */ + + bt_en: bt-en-state { + pins = "gpio85"; + function = "gpio"; + output-low; + bias-disable; + }; + + qup_uart7_sleep_cts: qup-uart7-sleep-cts-state { + pins = "gpio28"; + function = "gpio"; + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; + }; + + qup_uart7_sleep_rts: qup-uart7-sleep-rts-state { + pins = "gpio29"; + function = "gpio"; + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + bias-pull-down; + }; + + qup_uart7_sleep_rx: qup-uart7-sleep-rx-state { + pins = "gpio31"; + function = "gpio"; + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + bias-pull-up; + }; + + qup_uart7_sleep_tx: qup-uart7-sleep-tx-state { + pins = "gpio30"; + function = "gpio"; + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + bias-pull-up; + }; }; &uart5 { - compatible = "qcom,geni-debug-uart"; status = "okay"; }; +&uart7 { + /delete-property/ interrupts; + interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; + pinctrl-1 = <&qup_uart7_sleep_cts>, + <&qup_uart7_sleep_rts>, + <&qup_uart7_sleep_tx>, + <&qup_uart7_sleep_rx>; + pinctrl-names = "default", + "sleep"; + + status = "okay"; + + bluetooth: bluetooth { + compatible = "qcom,wcn6750-bt"; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + max-speed = <3200000>; + }; +}; + &usb_1 { status = "okay"; }; &usb_1_dwc3 { - dr_mode = "peripheral"; + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; }; &usb_1_hsphy { @@ -464,9 +1155,117 @@ vdda-phy-supply = <&vreg_l6b_1p2>; vdda-pll-supply = <&vreg_l1b_0p912>; + orientation-switch; + + status = "okay"; +}; + +&usb_dp_qmpphy_out { + remote-endpoint = <&redriver_phy_con_ss>; +}; + +&usb_dp_qmpphy_usb_ss_in { + remote-endpoint = <&usb_1_dwc3_ss>; +}; + +&usb_dp_qmpphy_dp_in { + remote-endpoint = <&mdss_dp_out>; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l7b_2p952>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l9b_1p2>; + vccq-max-microamp = <900000>; + vccq2-supply = <&vreg_l9b_1p2>; + vccq2-max-microamp = <900000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l10c_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + status = "okay"; +}; + +&venus { status = "okay"; }; &wifi { memory-region = <&wlan_fw_mem>; + qcom,calibration-variant = "Qualcomm_rb3gen2"; + + status = "okay"; +}; + +/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */ + +&edp_hot_plug_det { + function = "gpio"; + bias-disable; +}; + +&pm7250b_gpios { + lt9611_rst_pin: lt9611-rst-state { + pins = "gpio2"; + function = "normal"; + + output-high; + input-disable; + power-source = <0>; + }; +}; + +&sdc2_clk { + bias-disable; + drive-strength = <16>; +}; + +&sdc2_cmd { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc2_data { + bias-pull-up; + drive-strength = <10>; +}; + +&tlmm { + lt9611_irq_pin: lt9611-irq-state { + pins = "gpio24"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie1_reset_n: pcie1-reset-n-state { + pins = "gpio2"; + function = "gpio"; + drive-strength = <16>; + output-low; + bias-disable; + }; + + pcie1_wake_n: pcie1-wake-n-state { + pins = "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + sd_cd: sd-cd-state { + pins = "gpio91"; + function = "gpio"; + bias-pull-up; + }; +}; + +&lpass_audiocc { + compatible = "qcom,qcm6490-lpassaudiocc"; + /delete-property/ power-domains; }; |