diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/qrb4210-rb2.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 131 |
1 files changed, 125 insertions, 6 deletions
diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts index 7c19f874fa71..52db18847803 100644 --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts @@ -6,8 +6,12 @@ /dts-v1/; #include <dt-bindings/leds/common.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> +#include <dt-bindings/usb/pd.h> #include "sm4250.dtsi" #include "pm6125.dtsi" +#include "pmi632.dtsi" / { model = "Qualcomm Technologies, Inc. QRB4210 RB2"; @@ -23,7 +27,7 @@ }; clocks { - clk40M: can-clk { + clk40m: can-clk { compatible = "fixed-clock"; clock-frequency = <40000000>; #clock-cells = <0>; @@ -58,6 +62,17 @@ }; }; + i2c2_gpio: i2c { + compatible = "i2c-gpio"; + + sda-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + scl-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + leds { compatible = "gpio-leds"; @@ -90,6 +105,55 @@ }; }; + sound { + compatible = "qcom,qrb4210-rb2-sndcard"; + pinctrl-0 = <&lpi_i2s2_active>; + pinctrl-names = "default"; + model = "Qualcomm-RB2-WSA8815-Speakers-DMIC0"; + audio-routing = "MM_DL1", "MultiMedia1 Playback", + "MM_DL2", "MultiMedia2 Playback"; + + mm1-dai-link { + link-name = "MultiMedia1"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + hdmi-dai-link { + link-name = "HDMI Playback"; + + cpu { + sound-dai = <&q6afedai SECONDARY_MI2S_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <<9611_codec 0>; + }; + }; + }; + vreg_hdmi_out_1p2: regulator-hdmi-out-1p2 { compatible = "regulator-fixed"; regulator-name = "VREG_HDMI_OUT_1P2"; @@ -188,7 +252,7 @@ }; }; -&i2c2 { +&i2c2_gpio { clock-frequency = <400000>; status = "okay"; @@ -256,6 +320,46 @@ }; }; +&pmi632_typec { + status = "okay"; + + connector { + compatible = "usb-c-connector"; + + power-role = "dual"; + data-role = "dual"; + self-powered; + + typec-power-opmode = "default"; + pd-disable; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + pmi632_hs_in: endpoint { + remote-endpoint = <&usb_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + pmi632_ss_in: endpoint { + remote-endpoint = <&usb_qmpphy_out>; + }; + }; + }; + }; +}; + +&pmi632_vbus { + regulator-min-microamp = <500000>; + regulator-max-microamp = <1000000>; + status = "okay"; +}; + &pon_pwrkey { status = "okay"; }; @@ -265,6 +369,14 @@ status = "okay"; }; +/* SECONDARY I2S uses 1 I2S SD Line for audio on LT9611UXC HDMI Bridge */ +&q6afedai { + dai@20 { + reg = <SECONDARY_MI2S_RX>; + qcom,sd-lines = <0>; + }; +}; + &qupv3_id_0 { status = "okay"; }; @@ -361,6 +473,8 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-allow-set-load; + regulator-always-on; + regulator-boot-on; }; vreg_l10a_1p8: l10 { @@ -482,7 +596,7 @@ compatible = "microchip,mcp2518fd"; reg = <0>; interrupts-extended = <&tlmm 39 IRQ_TYPE_LEVEL_LOW>; - clocks = <&clk40M>; + clocks = <&clk40m>; spi-max-frequency = <10000000>; vdd-supply = <&vdc_5v>; xceiver-supply = <&vdc_5v>; @@ -490,7 +604,7 @@ }; &sleep_clk { - clock-frequency = <32000>; + clock-frequency = <32764>; }; &tlmm { @@ -607,8 +721,8 @@ status = "okay"; }; -&usb_dwc3 { - maximum-speed = "super-speed"; +&usb_dwc3_hs { + remote-endpoint = <&pmi632_hs_in>; }; &usb_hsphy { @@ -626,12 +740,17 @@ status = "okay"; }; +&usb_qmpphy_out { + remote-endpoint = <&pmi632_ss_in>; +}; + &wifi { vdd-0.8-cx-mx-supply = <&vreg_l8a_0p664>; vdd-1.8-xo-supply = <&vreg_l16a_1p3>; vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; vdd-3.3-ch0-supply = <&vreg_l23a_3p3>; qcom,ath10k-calibration-variant = "Thundercomm_RB2"; + firmware-name = "qrb4210"; status = "okay"; }; |