diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sa8155p-adp.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 82 |
1 files changed, 37 insertions, 45 deletions
diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts index 4dee790f1049..f41dcc379dce 100644 --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts @@ -136,9 +136,8 @@ regulator-max-microvolt = <880000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; - regulator-allowed-modes = - <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l7a_1p8: ldo7 { @@ -154,9 +153,8 @@ regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; - regulator-allowed-modes = - <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l11a_0p8: ldo11 { @@ -263,9 +261,8 @@ regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; - regulator-allowed-modes = - <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l7c_1p8: ldo7 { @@ -281,9 +278,8 @@ regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; - regulator-allowed-modes = - <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l10c_3p3: ldo10 { @@ -397,7 +393,7 @@ vmmc-supply = <&vreg_l17a_2p96>; /* Card power line */ bus-width = <4>; no-sdio; - no-emmc; + no-mmc; }; &uart2 { @@ -488,26 +484,26 @@ &tlmm { gpio-reserved-ranges = <0 4>; - sdc2_on: sdc2_on { - clk { + sdc2_on: sdc2-on-state { + clk-pins { pins = "sdc2_clk"; bias-disable; /* No pull */ drive-strength = <16>; /* 16 MA */ }; - cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; /* pull up */ drive-strength = <16>; /* 16 MA */ }; - data { + data-pins { pins = "sdc2_data"; bias-pull-up; /* pull up */ drive-strength = <16>; /* 16 MA */ }; - sd-cd { + sd-cd-pins { pins = "gpio96"; function = "gpio"; bias-pull-up; /* pull up */ @@ -515,26 +511,26 @@ }; }; - sdc2_off: sdc2_off { - clk { + sdc2_off: sdc2-off-state { + clk-pins { pins = "sdc2_clk"; bias-disable; /* No pull */ drive-strength = <2>; /* 2 MA */ }; - cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; /* pull up */ drive-strength = <2>; /* 2 MA */ }; - data { + data-pins { pins = "sdc2_data"; bias-pull-up; /* pull up */ drive-strength = <2>; /* 2 MA */ }; - sd-cd { + sd-cd-pins { pins = "gpio96"; function = "gpio"; bias-pull-up; /* pull up */ @@ -542,66 +538,62 @@ }; }; - usb2phy_ac_en1_default: usb2phy_ac_en1_default { - mux { - pins = "gpio113"; - function = "usb2phy_ac"; - bias-disable; - drive-strength = <2>; - }; + usb2phy_ac_en1_default: usb2phy-ac-en1-default-state { + pins = "gpio113"; + function = "usb2phy_ac"; + bias-disable; + drive-strength = <2>; }; - usb2phy_ac_en2_default: usb2phy_ac_en2_default { - mux { - pins = "gpio123"; - function = "usb2phy_ac"; - bias-disable; - drive-strength = <2>; - }; + usb2phy_ac_en2_default: usb2phy-ac-en2-default-state { + pins = "gpio123"; + function = "usb2phy_ac"; + bias-disable; + drive-strength = <2>; }; - ethernet_defaults: ethernet-defaults { - mdc { + ethernet_defaults: ethernet-defaults-state { + mdc-pins { pins = "gpio7"; function = "rgmii"; bias-pull-up; }; - mdio { + mdio-pins { pins = "gpio59"; function = "rgmii"; bias-pull-up; }; - rgmii-rx { + rgmii-rx-pins { pins = "gpio117", "gpio118", "gpio119", "gpio120", "gpio115", "gpio116"; function = "rgmii"; bias-disable; drive-strength = <2>; }; - rgmii-tx { + rgmii-tx-pins { pins = "gpio122", "gpio4", "gpio5", "gpio6", "gpio114", "gpio121"; function = "rgmii"; bias-pull-up; drive-strength = <16>; }; - phy-intr { + phy-intr-pins { pins = "gpio124"; function = "emac_phy"; bias-disable; drive-strength = <8>; }; - pps { + pps-pins { pins = "gpio81"; function = "emac_pps"; bias-disable; drive-strength = <8>; }; - phy-reset { + phy-reset-pins { pins = "gpio79"; function = "gpio"; bias-pull-up; |