diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sdm845-db845c.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 38 |
1 files changed, 23 insertions, 15 deletions
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index 3a407af43596..02dcf75c0745 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -120,9 +120,11 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - // TODO: make it possible to drive same GPIO from two clients - // gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; - // enable-active-high; + /* + * TODO: make it possible to drive same GPIO from two clients + * gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; + * enable-active-high; + */ }; pcie0_1p05v: pcie-0-1p05v-regulator { @@ -133,9 +135,11 @@ regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; - // TODO: make it possible to drive same GPIO from two clients - // gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>; - // enable-active-high; + /* + * TODO: make it possible to drive same GPIO from two clients + * gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>; + * enable-active-high; + */ }; cam0_dvdd_1v2: reg_cam0_dvdd_1v2 { @@ -195,9 +199,11 @@ regulator-min-microvolt = <500000>; regulator-max-microvolt = <500000>; - // TODO: make it possible to drive same GPIO from two clients - // gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; - // enable-active-high; + /* + * TODO: make it possible to drive same GPIO from two clients + * gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; + * enable-active-high; + */ }; vbat: vbat-regulator { @@ -1196,7 +1202,7 @@ compatible = "ovti,ov8856"; reg = <0x10>; - // CAM0_RST_N + /* CAM0_RST_N */ reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&cam0_default>; @@ -1205,7 +1211,8 @@ clock-names = "xvclk"; clock-frequency = <19200000>; - /* The &vreg_s4a_1p8 trace is powered on as a, + /* + * The &vreg_s4a_1p8 trace is powered on as a, * so it is represented by a fixed regulator. * * The 2.8V vdda-supply and 1.2V vddd-supply regulators @@ -1233,10 +1240,10 @@ camera@60 { compatible = "ovti,ov7251"; - // I2C address as per ov7251.txt linux documentation + /* I2C address as per ov7251.txt linux documentation */ reg = <0x60>; - // CAM3_RST_N + /* CAM3_RST_N */ enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cam3_default>; @@ -1245,7 +1252,8 @@ clock-names = "xclk"; clock-frequency = <24000000>; - /* The &vreg_s4a_1p8 trace always powered on. + /* + * The &vreg_s4a_1p8 trace always powered on. * * The 2.8V vdda-supply regulator is enabled when the * vreg_s4a_1p8 trace is pulled high. @@ -1261,7 +1269,7 @@ port { ov7251_ep: endpoint { data-lanes = <0 1>; -// remote-endpoint = <&csiphy3_ep>; +/* remote-endpoint = <&csiphy3_ep>; */ }; }; }; |