diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sm4450.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sm4450.dtsi | 107 |
1 files changed, 107 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/sm4450.dtsi b/arch/arm64/boot/dts/qcom/sm4450.dtsi index c4e5b33f5169..3e7ae3bebbe0 100644 --- a/arch/arm64/boot/dts/qcom/sm4450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm4450.dtsi @@ -3,8 +3,11 @@ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. */ +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sm4450-gcc.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> / { interrupt-parent = <&intc>; @@ -328,6 +331,18 @@ }; }; + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + aop_cmd_db_mem: cmd-db@80860000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x80860000 0x0 0x20000>; + no-map; + }; + }; + soc: soc@0 { #address-cells = <2>; #size-cells = <2>; @@ -335,6 +350,43 @@ dma-ranges = <0 0 0 0 0x10 0>; compatible = "simple-bus"; + gcc: clock-controller@100000 { + compatible = "qcom,sm4450-gcc"; + reg = <0x0 0x00100000 0x0 0x1f4200>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <0>, + <0>, + <0>, + <0>; + }; + + qupv3_id_0: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00ac0000 0x0 0x2000>; + ranges; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + #address-cells = <2>; + #size-cells = <2>; + status = "disabled"; + + uart7: serial@a88000 { + compatible = "qcom,geni-debug-uart"; + reg = <0x0 0x00a88000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>; + pinctrl-names = "default"; + status = "disabled"; + }; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x40000>; @@ -351,6 +403,32 @@ interrupt-controller; }; + tlmm: pinctrl@f100000 { + compatible = "qcom,sm4450-tlmm"; + reg = <0x0 0x0f100000 0x0 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 137>; + wakeup-parent = <&pdc>; + + qup_uart7_rx: qup-uart7-rx-state { + pins = "gpio23"; + function = "qup1_se2_l2"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart7_tx: qup-uart7-tx-state { + pins = "gpio22"; + function = "qup1_se2_l2"; + drive-strength = <2>; + bias-disable; + }; + }; + intc: interrupt-controller@17200000 { compatible = "arm,gic-v3"; reg = <0x0 0x17200000 0x0 0x10000>, /* GICD */ @@ -419,6 +497,35 @@ status = "disabled"; }; }; + + apps_rsc: rsc@17a00000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x17a00000 0x0 0x10000>, + <0x0 0x17a10000 0x0 0x10000>, + <0x0 0x17a20000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + label = "apps_rsc"; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>, + <WAKE_TCS 3>, <CONTROL_TCS 0>; + power-domains = <&CLUSTER_PD>; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sm4450-rpmh-clk"; + #clock-cells = <1>; + clocks = <&xo_board>; + clock-names = "xo"; + }; + }; + }; timer { |