diff options
Diffstat (limited to 'arch/arm64/boot/dts/renesas/hihope-common.dtsi')
-rw-r--r-- | arch/arm64/boot/dts/renesas/hihope-common.dtsi | 93 |
1 files changed, 21 insertions, 72 deletions
diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi index 2c942a7eaeeb..83104af2813e 100644 --- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the HiHope RZ/G2[MN] main board common parts + * Device Tree Source for the HiHope RZ/G2H Rev.4.0 and + * HiHope RZ/G2[MN] Rev.[2.0/3.0/4.0] main board common parts * * Copyright (C) 2019 Renesas Electronics Corp. */ @@ -9,8 +10,19 @@ / { aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &iic_pmic; serial0 = &scif2; serial1 = &hscif0; + mmc0 = &sdhi3; + mmc1 = &sdhi0; + mmc2 = &sdhi2; }; chosen { @@ -32,17 +44,6 @@ leds { compatible = "gpio-leds"; - bt_active_led { - label = "blue:bt"; - gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "hci0-power"; - default-state = "off"; - }; - - led0 { - gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>; - }; - led1 { gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; }; @@ -55,15 +56,12 @@ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; }; - wlan_active_led { - label = "yellow:wlan"; - gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tx"; - default-state = "off"; + led4 { + gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>; }; }; - reg_1p8v: regulator0 { + reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; regulator-min-microvolt = <1800000>; @@ -72,7 +70,7 @@ regulator-always-on; }; - reg_3p3v: regulator1 { + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; @@ -109,19 +107,7 @@ gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>; gpios-states = <1>; - states = <3300000 1 - 1800000 0>; - }; - - wlan_en_reg: regulator-wlan_en { - compatible = "regulator-fixed"; - regulator-name = "wlan-en-regulator"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - startup-delay-us = <70000>; - - gpio = <&gpio_expander 1 GPIO_ACTIVE_HIGH>; - enable-active-high; + states = <3300000 1>, <1800000 0>; }; x302_clk: x302-clock { @@ -162,7 +148,7 @@ }; &gpio6 { - usb1-reset { + usb1-reset-hog { gpio-hog; gpios = <10 GPIO_ACTIVE_LOW>; output-low; @@ -195,11 +181,6 @@ uart-has-rtscts; status = "okay"; - - bluetooth { - compatible = "ti,wl1837-st"; - enable-gpios = <&gpio_expander 2 GPIO_ACTIVE_HIGH>; - }; }; &hsusb { @@ -211,13 +192,6 @@ clock-frequency = <400000>; status = "okay"; - gpio_expander: gpio@20 { - compatible = "onnn,pca9654"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - }; - versaclock5: clock-generator@6a { compatible = "idt,5p49v5923"; reg = <0x6a>; @@ -282,11 +256,6 @@ power-source = <1800>; }; - sound_clk_pins: sound_clk { - groups = "audio_clk_a_a"; - function = "audio_clk"; - }; - usb0_pins: usb0 { groups = "usb0"; function = "usb0"; @@ -310,28 +279,6 @@ }; }; -&rcar_sound { - pinctrl-0 = <&sound_clk_pins>; - pinctrl-names = "default"; - - status = "okay"; - - /* Single DAI */ - #sound-dai-cells = <0>; - - rsnd_port: port { - rsnd_endpoint: endpoint { - remote-endpoint = <&dw_hdmi0_snd_in>; - - dai-format = "i2s"; - bitclock-master = <&rsnd_endpoint>; - frame-master = <&rsnd_endpoint>; - - playback = <&ssi2>; - }; - }; -}; - &rwdt { timeout-sec = <60>; status = "okay"; @@ -392,6 +339,8 @@ vqmmc-supply = <®_1p8v>; bus-width = <8>; mmc-hs200-1_8v; + no-sd; + no-sdio; non-removable; fixed-emmc-driver-type = <1>; status = "okay"; |