diff options
Diffstat (limited to 'arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts')
| -rw-r--r-- | arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts | 206 |
1 files changed, 0 insertions, 206 deletions
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts deleted file mode 100644 index 36667c81d43d..000000000000 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts +++ /dev/null @@ -1,206 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for the Salvator-X 2nd version board with R-Car H3 ES2.0 - * - * Copyright (C) 2015-2017 Renesas Electronics Corp. - */ - -/dts-v1/; -#include "r8a7795.dtsi" -#include "salvator-xs.dtsi" - -/ { - model = "Renesas Salvator-X 2nd version board based on r8a7795 ES2.0+"; - compatible = "renesas,salvator-xs", "renesas,r8a7795"; - - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0x0 0x48000000 0x0 0x38000000>; - }; - - memory@500000000 { - device_type = "memory"; - reg = <0x5 0x00000000 0x0 0x40000000>; - }; - - memory@600000000 { - device_type = "memory"; - reg = <0x6 0x00000000 0x0 0x40000000>; - }; - - memory@700000000 { - device_type = "memory"; - reg = <0x7 0x00000000 0x0 0x40000000>; - }; -}; - -&du { - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&cpg CPG_MOD 722>, - <&cpg CPG_MOD 721>, - <&versaclock6 1>, - <&x21_clk>, - <&x22_clk>, - <&versaclock6 2>; - clock-names = "du.0", "du.1", "du.2", "du.3", - "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3"; -}; - -&ehci2 { - status = "okay"; -}; - -&ehci3 { - dr_mode = "otg"; - status = "okay"; -}; - -&hdmi0 { - status = "okay"; - - ports { - port@1 { - reg = <1>; - rcar_dw_hdmi0_out: endpoint { - remote-endpoint = <&hdmi0_con>; - }; - }; - port@2 { - reg = <2>; - dw_hdmi0_snd_in: endpoint { - remote-endpoint = <&rsnd_endpoint1>; - }; - }; - }; -}; - -&hdmi0_con { - remote-endpoint = <&rcar_dw_hdmi0_out>; -}; - -&hdmi1 { - status = "okay"; - - ports { - port@1 { - reg = <1>; - rcar_dw_hdmi1_out: endpoint { - remote-endpoint = <&hdmi1_con>; - }; - }; - port@2 { - reg = <2>; - dw_hdmi1_snd_in: endpoint { - remote-endpoint = <&rsnd_endpoint2>; - }; - }; - }; -}; - -&hdmi1_con { - remote-endpoint = <&rcar_dw_hdmi1_out>; -}; - -&hsusb3 { - dr_mode = "otg"; - status = "okay"; -}; - -&ohci2 { - status = "okay"; -}; - -&ohci3 { - dr_mode = "otg"; - status = "okay"; -}; - -&pca9654 { - pcie_sata_switch { - gpio-hog; - gpios = <7 GPIO_ACTIVE_HIGH>; - output-low; /* enable SATA by default */ - line-name = "PCIE/SATA switch"; - }; -}; - -&pfc { - usb2_pins: usb2 { - groups = "usb2"; - function = "usb2"; - }; - - /* - * - On Salvator-X[S], GP6_3[01] are connected to ADV7482 as irq pins - * (when SW31 is the default setting on Salvator-XS). - * - If SW31 is the default setting, you cannot use USB2.0 ch3 on - * r8a7795 with Salvator-XS. - * Hence the SW31 setting must be changed like 2) below. - * 1) Default setting of SW31: ON-ON-OFF-OFF-OFF-OFF: - * - Connect GP6_3[01] to ADV7842. - * 2) Changed setting of SW31: OFF-OFF-ON-ON-ON-ON: - * - Connect GP6_3[01] to BD082065 (USB2.0 ch3's host power). - * - Connect GP6_{04,21} to ADV7842. - */ - usb2_ch3_pins: usb2_ch3 { - groups = "usb2_ch3"; - function = "usb2_ch3"; - }; -}; - -&rcar_sound { - ports { - /* rsnd_port0 is on salvator-common */ - rsnd_port1: port@1 { - reg = <1>; - rsnd_endpoint1: endpoint { - remote-endpoint = <&dw_hdmi0_snd_in>; - - dai-format = "i2s"; - bitclock-master = <&rsnd_endpoint1>; - frame-master = <&rsnd_endpoint1>; - - playback = <&ssi2>; - }; - }; - rsnd_port2: port@2 { - reg = <2>; - rsnd_endpoint2: endpoint { - remote-endpoint = <&dw_hdmi1_snd_in>; - - dai-format = "i2s"; - bitclock-master = <&rsnd_endpoint2>; - frame-master = <&rsnd_endpoint2>; - - playback = <&ssi3>; - }; - }; - }; -}; - -/* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */ -&sata { - status = "okay"; -}; - -&sound_card { - dais = <&rsnd_port0 /* ak4613 */ - &rsnd_port1 /* HDMI0 */ - &rsnd_port2>; /* HDMI1 */ -}; - -&usb2_phy2 { - pinctrl-0 = <&usb2_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&usb2_phy3 { - pinctrl-0 = <&usb2_ch3_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; |