diff options
Diffstat (limited to 'arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi | 98 |
1 files changed, 81 insertions, 17 deletions
diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi index f062d4ad78b7..ef12c1c462a7 100644 --- a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi @@ -5,6 +5,7 @@ * Copyright (C) 2023 Renesas Electronics Corp. */ +#include <dt-bindings/clock/renesas,r9a08g045-vbattb.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/rzg2l-pinctrl.h> @@ -25,27 +26,23 @@ * SW_OFF - SD2 is connected to SoC * SW_ON - SCIF1, SSI0, IRQ0, IRQ1 connected to SoC */ -#define SW_CONFIG2 SW_ON +#define SW_CONFIG2 SW_OFF #define SW_CONFIG3 SW_ON / { compatible = "renesas,rzg3s-smarcm", "renesas,r9a08g045s33", "renesas,r9a08g045"; aliases { + i2c1 = &i2c1; mmc0 = &sdhi0; #if SW_CONFIG3 == SW_OFF mmc2 = &sdhi2; #else - eth0 = ð0; - eth1 = ð1; + ethernet0 = ð0; + ethernet1 = ð1; #endif }; - chosen { - bootargs = "ignore_loglevel"; - stdout-path = "serial0:115200n8"; - }; - memory@48000000 { device_type = "memory"; /* First 128MB is reserved for secure area. */ @@ -61,7 +58,6 @@ enable-active-high; }; -#if SW_CONFIG2 == SW_ON vccq_sdhi0: regulator1 { compatible = "regulator-gpio"; regulator-name = "SDHI0 VccQ"; @@ -71,8 +67,8 @@ gpios-states = <1>; states = <3300000 1>, <1800000 0>; }; -#else - reg_1p8v: regulator1 { + + reg_1p8v: regulator2 { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; regulator-min-microvolt = <1800000>; @@ -80,9 +76,17 @@ regulator-boot-on; regulator-always-on; }; -#endif - vcc_sdhi2: regulator2 { + reg_3p3v: regulator3 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_sdhi2: regulator4 { compatible = "regulator-fixed"; regulator-name = "SDHI2 Vcc"; regulator-min-microvolt = <3300000>; @@ -90,6 +94,16 @@ gpios = <&pinctrl RZG2L_GPIO(8, 1) GPIO_ACTIVE_HIGH>; enable-active-high; }; + + x3_clk: x3-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; +}; + +&adc { + status = "okay"; }; #if SW_CONFIG3 == SW_ON @@ -102,8 +116,7 @@ phy0: ethernet-phy@7 { reg = <7>; - interrupt-parent = <&pinctrl>; - interrupts = <RZG2L_GPIO(12, 0) IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&pinctrl RZG2L_GPIO(12, 0) IRQ_TYPE_EDGE_FALLING>; rxc-skew-psec = <0>; txc-skew-psec = <0>; rxdv-skew-psec = <0>; @@ -128,8 +141,7 @@ phy1: ethernet-phy@7 { reg = <7>; - interrupt-parent = <&pinctrl>; - interrupts = <RZG2L_GPIO(12, 1) IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&pinctrl RZG2L_GPIO(12, 1) IRQ_TYPE_EDGE_FALLING>; rxc-skew-psec = <0>; txc-skew-psec = <0>; rxdv-skew-psec = <0>; @@ -150,6 +162,34 @@ clock-frequency = <24000000>; }; +&i2c1 { + status = "okay"; + + versa3: clock-generator@68 { + compatible = "renesas,5l35023"; + reg = <0x68>; + clocks = <&x3_clk>; + #clock-cells = <1>; + assigned-clocks = <&versa3 0>, + <&versa3 1>, + <&versa3 2>, + <&versa3 3>, + <&versa3 4>, + <&versa3 5>; + assigned-clock-rates = <24000000>, + <12288000>, + <11289600>, + <25000000>, + <100000000>, + <100000000>; + renesas,settings = [ + 80 00 11 19 4c 42 dc 2f 06 7d 20 1a 5f 1e f2 27 + 00 40 00 00 00 00 00 00 06 0c 19 02 3f f0 90 86 + a0 80 30 30 9c + ]; + }; +}; + #if SW_CONFIG2 == SW_ON /* SD0 slot */ &sdhi0 { @@ -193,12 +233,14 @@ #endif &pinctrl { +#if SW_CONFIG3 == SW_ON eth0-phy-irq-hog { gpio-hog; gpios = <RZG2L_GPIO(12, 0) GPIO_ACTIVE_LOW>; input; line-name = "eth0-phy-irq"; }; +#endif eth0_pins: eth0 { txc { @@ -234,12 +276,14 @@ }; }; +#if SW_CONFIG3 == SW_ON eth1-phy-irq-hog { gpio-hog; gpios = <RZG2L_GPIO(12, 1) GPIO_ACTIVE_LOW>; input; line-name = "eth1-phy-irq"; }; +#endif eth1_pins: eth1 { txc { @@ -336,3 +380,23 @@ }; }; }; + +&rtc { + status = "okay"; +}; + +&vbattb { + assigned-clocks = <&vbattb VBATTB_MUX>; + assigned-clock-parents = <&vbattb VBATTB_XC>; + quartz-load-femtofarads = <12500>; + status = "okay"; +}; + +&vbattb_xtal { + clock-frequency = <32768>; +}; + +&wdt0 { + timeout-sec = <60>; + status = "okay"; +}; |