diff options
Diffstat (limited to 'arch/arm64/boot/dts/renesas/ulcb-kf.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 111 |
1 files changed, 66 insertions, 45 deletions
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi index 50de17e4fb3f..2a157d1efb3d 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi @@ -4,8 +4,24 @@ * * Copyright (C) 2017 Renesas Electronics Corp. * Copyright (C) 2017 Cogent Embedded, Inc. + * + * Sample Audio settings: + * + * > amixer set "DVC Out" 1% + * > amixer set "DVC In" 20% + * + * // if you use xxxx-mix+split.dtsi + * > amixer -D hw:1 set "pcm3168a DAC1" 50% + * > amixer -D hw:1 set "pcm3168a DAC2" 50% + * > amixer -D hw:1 set "pcm3168a DAC3" 50% + * > amixer -D hw:1 set "pcm3168a DAC4" 50% + * + * // else + * > amixer -D hw:1 set "DAC1" 50% + * > amixer -D hw:1 set "DAC2" 50% + * > amixer -D hw:1 set "DAC3" 50% + * > amixer -D hw:1 set "DAC4" 50% */ - / { aliases { serial1 = &hscif0; @@ -32,39 +48,40 @@ }; }; - accel_3v3: regulator-acc-3v3 { + reg_t1p8v: regulator-t1p8v { compatible = "regulator-fixed"; - regulator-name = "accel-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - hdmi_1v8: regulator-hdmi-1v8 { - compatible = "regulator-fixed"; - regulator-name = "hdmi-1v8"; + regulator-name = "T1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; }; - hdmi_3v3: regulator-hdmi-3v3 { + pcie_1v5: regulator-pcie-1v5 { compatible = "regulator-fixed"; - regulator-name = "hdmi-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + regulator-name = "pcie-1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&gpio_exp_77 15 GPIO_ACTIVE_HIGH>; + enable-active-high; }; - snd_3p3v: regulator-snd_3p3v { + pcie_3v3: regulator-pcie-3v3 { compatible = "regulator-fixed"; - regulator-name = "snd-3.3v"; + regulator-name = "pcie-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + gpio = <&gpio_exp_77 14 GPIO_ACTIVE_HIGH>; + enable-active-high; }; - snd_vcc5v: regulator-snd_vcc5v { + reg_5v: regulator-5v { compatible = "regulator-fixed"; - regulator-name = "snd-vcc5v"; + regulator-name = "fixed-5V"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; }; wlan_en: regulator-wlan_en { @@ -149,19 +166,18 @@ pinctrl-0 = <&hdmi1_pins>; pinctrl-names = "default"; - interrupt-parent = <&gpio2>; - interrupts = <14 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&gpio2 14 IRQ_TYPE_LEVEL_LOW>; clocks = <&cs2000>; clock-names = "cec"; pd-gpios = <&gpio_exp_75 5 GPIO_ACTIVE_LOW>; - avdd-supply = <&hdmi_1v8>; - dvdd-supply = <&hdmi_1v8>; - pvdd-supply = <&hdmi_1v8>; - dvdd-3v-supply = <&hdmi_3v3>; - bgvdd-supply = <&hdmi_1v8>; + avdd-supply = <®_t1p8v>; + dvdd-supply = <®_t1p8v>; + pvdd-supply = <®_t1p8v>; + dvdd-3v-supply = <®_3p3v>; + bgvdd-supply = <®_t1p8v>; adi,input-depth = <8>; adi,input-colorspace = "rgb"; @@ -198,8 +214,8 @@ compatible = "st,lsm9ds0-imu"; reg = <0x1d>; - vdd-supply = <&accel_3v3>; - vddio-supply = <&accel_3v3>; + vdd-supply = <®_3p3v>; + vddio-supply = <®_3p3v>; }; pcm3168a: audio-codec@44 { @@ -209,20 +225,20 @@ clocks = <&clksndsel>; clock-names = "scki"; - VDD1-supply = <&snd_3p3v>; - VDD2-supply = <&snd_3p3v>; - VCCAD1-supply = <&snd_vcc5v>; - VCCAD2-supply = <&snd_vcc5v>; - VCCDA1-supply = <&snd_vcc5v>; - VCCDA2-supply = <&snd_vcc5v>; + VDD1-supply = <®_3p3v>; + VDD2-supply = <®_3p3v>; + VCCAD1-supply = <®_5v>; + VCCAD2-supply = <®_5v>; + VCCDA1-supply = <®_5v>; + VCCDA2-supply = <®_5v>; }; gyroscope@6b { compatible = "st,lsm9ds0-gyro"; reg = <0x6b>; - vdd-supply = <&accel_3v3>; - vddio-supply = <&accel_3v3>; + vdd-supply = <®_3p3v>; + vddio-supply = <®_3p3v>; }; }; }; @@ -235,8 +251,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - interrupt-parent = <&gpio6>; - interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&gpio6 8 IRQ_TYPE_EDGE_FALLING>; audio-out-off-hog { gpio-hog; @@ -296,8 +311,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - interrupt-parent = <&gpio6>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&gpio6 4 IRQ_TYPE_EDGE_FALLING>; }; }; @@ -317,8 +331,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - interrupt-parent = <&gpio7>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&gpio7 3 IRQ_TYPE_EDGE_FALLING>; }; gpio_exp_77: gpio@77 { @@ -328,8 +341,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - interrupt-parent = <&gpio5>; - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&gpio5 9 IRQ_TYPE_EDGE_FALLING>; }; }; @@ -348,6 +360,9 @@ &pciec1 { status = "okay"; + + vpcie1v5-supply = <&pcie_1v5>; + vpcie3v3-supply = <&pcie_3v3>; }; &pfc { @@ -417,6 +432,13 @@ pinctrl-names = "default"; status = "okay"; + + gnss { + compatible = "u-blox,neo-m8"; + reset-gpios = <&gpio_exp_75 6 GPIO_ACTIVE_LOW>; + vcc-supply = <®_3p3v>; + current-speed = <9600>; + }; }; &sdhi3 { @@ -438,8 +460,7 @@ wlcore: wlcore@2 { compatible = "ti,wl1837"; reg = <2>; - interrupt-parent = <&gpio1>; - interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&gpio1 25 IRQ_TYPE_EDGE_FALLING>; }; }; |