diff options
Diffstat (limited to 'arch/arm64/boot/dts/rockchip/rk3399-firefly.dts')
-rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3399-firefly.dts | 201 |
1 files changed, 170 insertions, 31 deletions
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts index c706db0ee9ec..260415d99aeb 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts @@ -5,7 +5,9 @@ /dts-v1/; #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/usb/pd.h> #include "rk3399.dtsi" #include "rk3399-opp.dtsi" @@ -13,6 +15,13 @@ model = "Firefly-RK3399 Board"; compatible = "firefly,firefly-rk3399", "rockchip,rk3399"; + aliases { + ethernet0 = &gmac; + mmc0 = &sdio0; + mmc1 = &sdmmc; + mmc2 = &sdhci; + }; + chosen { stdout-path = "serial2:1500000n8"; }; @@ -79,7 +88,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pwrbtn>; - power { + key-power { debounce-interval = <100>; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "GPIO Key Power"; @@ -88,18 +97,25 @@ }; }; + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&ir_int>; + pinctrl-names = "default"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>; + pinctrl-0 = <&work_led_pin>, <&diy_led_pin>; - work-led { + work_led: led-0 { label = "work"; default-state = "on"; gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; }; - diy-led { + diy_led: led-1 { label = "diy"; default-state = "off"; gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; @@ -145,6 +161,23 @@ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; }; + sound-dit { + compatible = "audio-graph-card"; + label = "SPDIF"; + dais = <&spdif_p0>; + }; + + spdif-dit { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + + port { + dit_p0_0: endpoint { + remote-endpoint = <&spdif_p0_0>; + }; + }; + }; + /* switched by pmic_sleep */ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { compatible = "regulator-fixed"; @@ -190,6 +223,17 @@ vin-supply = <&vcc_sys>; }; + vcc5v0_typec: vcc5v0-typec-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_typec_en>; + regulator-name = "vcc5v0_typec"; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + vcc_sys: vcc-sys { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; @@ -203,12 +247,12 @@ vdd_log: vdd-log { compatible = "pwm-regulator"; pwms = <&pwm2 0 25000 1>; + pwm-supply = <&vcc_sys>; regulator-name = "vdd_log"; regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <800000>; + regulator-min-microvolt = <430000>; regulator-max-microvolt = <1400000>; - vin-supply = <&vcc_sys>; }; }; @@ -256,6 +300,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &hdmi { ddc-i2c-bus = <&i2c3>; pinctrl-names = "default"; @@ -515,6 +564,53 @@ i2c-scl-falling-time-ns = <20>; status = "okay"; + fusb0: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&fusb0_int>; + vbus-supply = <&vcc5v0_typec>; + status = "okay"; + + connector { + compatible = "usb-c-connector"; + data-role = "host"; + label = "USB-C"; + op-sink-microwatt = <1000000>; + power-role = "dual"; + sink-pdos = + <PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>; + source-pdos = + <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>; + try-power-role = "sink"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usbc_hs: endpoint { + remote-endpoint = + <&u2phy0_typec_hs>; + }; + }; + + port@1 { + reg = <1>; + + usbc_ss: endpoint { + remote-endpoint = + <&tcphy0_typec_ss>; + }; + }; + }; + }; + }; + accelerometer@68 { compatible = "invensense,mpu6500"; reg = <0x68>; @@ -572,12 +668,34 @@ }; }; + fusb302x { + fusb0_int: fusb0-int { + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + ir { + ir_int: ir-int { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + lcd-panel { lcd_panel_reset: lcd-panel-reset { rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; }; }; + leds { + work_led_pin: work-led-pin { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + diy_led_pin: diy-led-pin { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pcie { pcie_pwr_en: pcie-pwr-en { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; @@ -589,18 +707,16 @@ }; pmic { - vsel1_gpio: vsel1-gpio { - rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; }; - vsel2_gpio: vsel2-gpio { - rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + vsel1_pin: vsel1-pin { + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; }; - }; - sdio-pwrseq { - wifi_enable_h: wifi-enable-h { - rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + vsel2_pin: vsel2-pin { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; }; }; @@ -610,9 +726,15 @@ }; }; - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb-typec { + vcc5v0_typec_en: vcc5v0_typec_en { + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; }; }; @@ -627,16 +749,6 @@ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; - - leds { - work_led_gpio: work_led-gpio { - rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - diy_led_gpio: diy_led-gpio { - rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; }; &pwm0 { @@ -660,21 +772,23 @@ keep-power-in-suspend; mmc-pwrseq = <&sdio_pwrseq>; non-removable; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; sd-uhs-sdr104; /* Power supply */ - vqmmc-supply = &vcc1v8_s3; /* IO line */ - vmmc-supply = &vcc_sdio; /* card's power */ + vqmmc-supply = <&vcc1v8_s3>; /* IO line */ + vmmc-supply = <&vcc_sdio>; /* card's power */ + #address-cells = <1>; + #size-cells = <0>; status = "okay"; brcmf: wifi@1 { + reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&gpio0>; - interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "host-wake"; brcm,drive-strength = <5>; pinctrl-names = "default"; @@ -702,10 +816,29 @@ status = "okay"; }; +&spdif { + pinctrl-0 = <&spdif_bus_1>; + status = "okay"; + + spdif_p0: port { + spdif_p0_0: endpoint { + remote-endpoint = <&dit_p0_0>; + }; + }; +}; + &tcphy0 { status = "okay"; }; +&tcphy0_usb3 { + port { + tcphy0_typec_ss: endpoint { + remote-endpoint = <&usbc_ss>; + }; + }; +}; + &tcphy1 { status = "okay"; }; @@ -729,6 +862,12 @@ phy-supply = <&vcc5v0_host>; status = "okay"; }; + + port { + u2phy0_typec_hs: endpoint { + remote-endpoint = <&usbc_hs>; + }; + }; }; &u2phy1 { |