diff options
Diffstat (limited to 'arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts')
| -rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts | 328 |
1 files changed, 317 insertions, 11 deletions
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts index de30c2632b8e..ba49f0bbaac6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts @@ -9,6 +9,8 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include <dt-bindings/usb/pd.h> #include "rk3588.dtsi" / { @@ -65,7 +67,7 @@ simple-audio-card,bitclock-master = <&masterdai>; simple-audio-card,format = "i2s"; simple-audio-card,frame-master = <&masterdai>; - simple-audio-card,hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>; + simple-audio-card,hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>; simple-audio-card,mclk-fs = <256>; simple-audio-card,pin-switches = "Headphones", "Speaker"; simple-audio-card,routing = @@ -119,7 +121,18 @@ pwms = <&pwm2 0 25000 0>; }; - pcie20_avdd0v85: pcie20-avdd0v85-regulator { + hdmi0-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi0_con_in: endpoint { + remote-endpoint = <&hdmi0_out_con>; + }; + }; + }; + + pcie20_avdd0v85: regulator-pcie20-avdd0v85 { compatible = "regulator-fixed"; regulator-name = "pcie20_avdd0v85"; regulator-always-on; @@ -129,7 +142,7 @@ vin-supply = <&avdd_0v85_s0>; }; - pcie20_avdd1v8: pcie20-avdd1v8-regulator { + pcie20_avdd1v8: regulator-pcie20-avdd1v8 { compatible = "regulator-fixed"; regulator-name = "pcie20_avdd1v8"; regulator-always-on; @@ -139,7 +152,7 @@ vin-supply = <&avcc_1v8_s0>; }; - pcie30_avdd0v75: pcie30-avdd0v75-regulator { + pcie30_avdd0v75: regulator-pcie30-avdd0v75 { compatible = "regulator-fixed"; regulator-name = "pcie30_avdd0v75"; regulator-always-on; @@ -149,7 +162,7 @@ vin-supply = <&avdd_0v75_s0>; }; - pcie30_avdd1v8: pcie30-avdd1v8-regulator { + pcie30_avdd1v8: regulator-pcie30-avdd1v8 { compatible = "regulator-fixed"; regulator-name = "pcie30_avdd1v8"; regulator-always-on; @@ -159,7 +172,19 @@ vin-supply = <&avcc_1v8_s0>; }; - vcc12v_dcin: vcc12v-dcin-regulator { + vbus5v0_typec: regulator-vbus5v0-typec { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PD0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&typec5v_pwren>; + regulator-name = "vbus5v0_typec"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + + vcc12v_dcin: regulator-vcc12v-dcin { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin"; regulator-always-on; @@ -168,7 +193,7 @@ regulator-max-microvolt = <12000000>; }; - vcc3v3_pcie30: vcc3v3-pcie30-regulator { + vcc3v3_pcie30: regulator-vcc3v3-pcie30 { compatible = "regulator-fixed"; regulator-name = "vcc3v3_pcie30"; regulator-min-microvolt = <3300000>; @@ -181,7 +206,29 @@ pinctrl-0 = <&vcc3v3_pcie30_en>; }; - vcc5v0_host: vcc5v0-host-regulator { + vcc3v3_pciewl_vbat: regulator-vcc3v3-pciewl-vbat { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "wlan-vbat"; + vin-supply = <&vcc_3v3_s0>; + }; + + vcc3v3_wlan: regulator-vcc3v3-wlan { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_pwren>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "wlan-en"; + vin-supply = <&vcc3v3_pciewl_vbat>; + }; + + vcc5v0_host: regulator-vcc5v0-host { compatible = "regulator-fixed"; regulator-name = "vcc5v0_host"; regulator-boot-on; @@ -195,7 +242,7 @@ vin-supply = <&vcc5v0_usb>; }; - vcc5v0_sys: vcc5v0-sys-regulator { + vcc5v0_sys: regulator-vcc5v0-sys { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; regulator-always-on; @@ -205,7 +252,7 @@ vin-supply = <&vcc12v_dcin>; }; - vcc5v0_usbdcin: vcc5v0-usbdcin-regulator { + vcc5v0_usbdcin: regulator-vcc5v0-usbdcin { compatible = "regulator-fixed"; regulator-name = "vcc5v0_usbdcin"; regulator-always-on; @@ -215,7 +262,7 @@ vin-supply = <&vcc12v_dcin>; }; - vcc5v0_usb: vcc5v0-usb-regulator { + vcc5v0_usb: regulator-vcc5v0-usb { compatible = "regulator-fixed"; regulator-name = "vcc5v0_usb"; regulator-always-on; @@ -224,12 +271,26 @@ regulator-max-microvolt = <5000000>; vin-supply = <&vcc5v0_usbdcin>; }; + + vccio_wl: regulator-vccio-wl { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "wlan-vddio"; + vin-supply = <&vcc_1v8_s0>; + }; }; &combphy0_ps { status = "okay"; }; +&combphy1_ps { + status = "okay"; +}; + &combphy2_psu { status = "okay"; }; @@ -281,9 +342,88 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu_s0>; + sram-supply = <&vdd_gpu_mem_s0>; + status = "okay"; +}; + +&hdmi0 { + status = "okay"; +}; + +&hdmi0_in { + hdmi0_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi0>; + }; +}; + +&hdmi0_out { + hdmi0_out_con: endpoint { + remote-endpoint = <&hdmi0_con_in>; + }; +}; + +&hdptxphy_hdmi0 { + status = "okay"; +}; + &i2c2 { status = "okay"; + usbc0: usb-typec@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio3>; + interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&usbc0_int>; + vbus-supply = <&vbus5v0_typec>; + status = "okay"; + + usb_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + op-sink-microwatt = <1000000>; + power-role = "dual"; + sink-pdos = + <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>; + source-pdos = + <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; + try-power-role = "source"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usbc0_orien_sw: endpoint { + remote-endpoint = <&usbdp_phy0_orientation_switch>; + }; + }; + + port@1 { + reg = <1>; + + usbc0_role_sw: endpoint { + remote-endpoint = <&dwc3_0_role_switch>; + }; + }; + + port@2 { + reg = <2>; + + dp_altmode_mux: endpoint { + remote-endpoint = <&usbdp_phy0_dp_altmode_mux>; + }; + }; + }; + }; + }; + hym8563: rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; @@ -336,6 +476,30 @@ }; }; +&pcie2x1l0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie2_0_rst>, <&pcie2_0_wake>, <&pcie2_0_clkreq>, <&wifi_host_wake_irq>; + reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_wlan>; + status = "okay"; + + pcie@0,0 { + reg = <0x200000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + device_type = "pci"; + bus-range = <0x20 0x2f>; + + wifi: wifi@0,0 { + compatible = "pci14e4,449d"; + reg = <0x210000 0 0 0 0>; + clocks = <&hym8563>; + clock-names = "lpo"; + }; + }; +}; + &pcie2x1l1 { reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; @@ -390,6 +554,18 @@ }; pcie2 { + pcie2_0_rst: pcie2-0-rst { + rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie2_0_wake: pcie2-0-wake { + rockchip,pins = <4 RK_PA4 4 &pcfg_pull_none>; + }; + + pcie2_0_clkreq: pcie2-0-clkreq { + rockchip,pins = <4 RK_PA3 4 &pcfg_pull_none>; + }; + pcie2_1_rst: pcie2-1-rst { rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; @@ -410,6 +586,26 @@ rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + usb-typec { + typec5v_pwren: typec5v-pwren { + rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usbc0_int: usbc0-int { + rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + wlan { + wifi_host_wake_irq: wifi-host-wake-irq { + rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + wifi_pwren: wifi-pwren { + rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; }; &pwm2 { @@ -484,12 +680,16 @@ regulators { vdd_gpu_s0: dcdc-reg1 { + /* regulator coupling requires always-on */ + regulator-always-on; regulator-boot-on; regulator-min-microvolt = <550000>; regulator-max-microvolt = <950000>; regulator-ramp-delay = <12500>; regulator-name = "vdd_gpu_s0"; regulator-enable-ramp-delay = <400>; + regulator-coupled-with = <&vdd_gpu_mem_s0>; + regulator-coupled-max-spread = <10000>; regulator-state-mem { regulator-off-in-suspend; }; @@ -534,12 +734,16 @@ }; vdd_gpu_mem_s0: dcdc-reg5 { + /* regulator coupling requires always-on */ + regulator-always-on; regulator-boot-on; regulator-min-microvolt = <675000>; regulator-max-microvolt = <950000>; regulator-ramp-delay = <12500>; regulator-enable-ramp-delay = <400>; regulator-name = "vdd_gpu_mem_s0"; + regulator-coupled-with = <&vdd_gpu_s0>; + regulator-coupled-max-spread = <10000>; regulator-state-mem { regulator-off-in-suspend; }; @@ -788,6 +992,8 @@ vdd_cpu_big1_s0: dcdc-reg1 { regulator-always-on; regulator-boot-on; + regulator-coupled-with = <&vdd_cpu_big1_mem_s0>; + regulator-coupled-max-spread = <10000>; regulator-min-microvolt = <550000>; regulator-max-microvolt = <1050000>; regulator-ramp-delay = <12500>; @@ -800,6 +1006,8 @@ vdd_cpu_big0_s0: dcdc-reg2 { regulator-always-on; regulator-boot-on; + regulator-coupled-with = <&vdd_cpu_big0_mem_s0>; + regulator-coupled-max-spread = <10000>; regulator-min-microvolt = <550000>; regulator-max-microvolt = <1050000>; regulator-ramp-delay = <12500>; @@ -812,6 +1020,8 @@ vdd_cpu_lit_s0: dcdc-reg3 { regulator-always-on; regulator-boot-on; + regulator-coupled-with = <&vdd_cpu_lit_mem_s0>; + regulator-coupled-max-spread = <10000>; regulator-min-microvolt = <550000>; regulator-max-microvolt = <950000>; regulator-ramp-delay = <12500>; @@ -836,6 +1046,8 @@ vdd_cpu_big1_mem_s0: dcdc-reg5 { regulator-always-on; regulator-boot-on; + regulator-coupled-with = <&vdd_cpu_big1_s0>; + regulator-coupled-max-spread = <10000>; regulator-min-microvolt = <675000>; regulator-max-microvolt = <1050000>; regulator-ramp-delay = <12500>; @@ -849,6 +1061,8 @@ vdd_cpu_big0_mem_s0: dcdc-reg6 { regulator-always-on; regulator-boot-on; + regulator-coupled-with = <&vdd_cpu_big0_s0>; + regulator-coupled-max-spread = <10000>; regulator-min-microvolt = <675000>; regulator-max-microvolt = <1050000>; regulator-ramp-delay = <12500>; @@ -873,6 +1087,8 @@ vdd_cpu_lit_mem_s0: dcdc-reg8 { regulator-always-on; regulator-boot-on; + regulator-coupled-with = <&vdd_cpu_lit_s0>; + regulator-coupled-max-spread = <10000>; regulator-min-microvolt = <675000>; regulator-max-microvolt = <950000>; regulator-ramp-delay = <12500>; @@ -1041,6 +1257,26 @@ status = "okay"; }; +&tsadc { + status = "okay"; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy1_otg { + status = "okay"; +}; + &u2phy2 { status = "okay"; }; @@ -1079,3 +1315,73 @@ &usb_host1_ohci { status = "okay"; }; + +&usbdp_phy0 { + mode-switch; + orientation-switch; + sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>; + sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + usbdp_phy0_orientation_switch: endpoint@0 { + reg = <0>; + remote-endpoint = <&usbc0_orien_sw>; + }; + + usbdp_phy0_dp_altmode_mux: endpoint@1 { + reg = <1>; + remote-endpoint = <&dp_altmode_mux>; + }; + }; +}; + +&usbdp_phy1 { + /* + * USBDP PHY1 is wired to a female USB3 Type-A connector. Additionally + * the differential pairs 2+3 and the aux channel are wired to a RTD2166, + * which converts the DP signal into VGA. This is exposed on the + * board via a female VGA connector. + */ + rockchip,dp-lane-mux = <2 3>; + status = "okay"; +}; + +&usb_host0_xhci { + dr_mode = "otg"; + usb-role-switch; + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + dwc3_0_role_switch: endpoint@0 { + reg = <0>; + remote-endpoint = <&usbc0_role_sw>; + }; + }; +}; + +&usb_host1_xhci { + dr_mode = "host"; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi0_in_vp0>; + }; +}; |