diff options
Diffstat (limited to 'arch/arm64/boot/dts/rockchip/rk3588.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3588.dtsi | 341 |
1 files changed, 341 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/rockchip/rk3588.dtsi b/arch/arm64/boot/dts/rockchip/rk3588.dtsi new file mode 100644 index 000000000000..5519c1430cb7 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588.dtsi @@ -0,0 +1,341 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Rockchip Electronics Co., Ltd. + */ + +#include "rk3588s.dtsi" +#include "rk3588-pinctrl.dtsi" + +/ { + pcie30_phy_grf: syscon@fd5b8000 { + compatible = "rockchip,rk3588-pcie3-phy-grf", "syscon"; + reg = <0x0 0xfd5b8000 0x0 0x10000>; + }; + + pipe_phy1_grf: syscon@fd5c0000 { + compatible = "rockchip,rk3588-pipe-phy-grf", "syscon"; + reg = <0x0 0xfd5c0000 0x0 0x100>; + }; + + i2s8_8ch: i2s@fddc8000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddc8000 0x0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S8_8CH_TX>, <&cru MCLK_I2S8_8CH_TX>, <&cru HCLK_I2S8_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S8_8CH_TX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 22>; + dma-names = "tx"; + power-domains = <&power RK3588_PD_VO0>; + resets = <&cru SRST_M_I2S8_8CH_TX>; + reset-names = "tx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s6_8ch: i2s@fddf4000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddf4000 0x0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S6_8CH_TX>, <&cru MCLK_I2S6_8CH_TX>, <&cru HCLK_I2S6_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S6_8CH_TX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 4>; + dma-names = "tx"; + power-domains = <&power RK3588_PD_VO1>; + resets = <&cru SRST_M_I2S6_8CH_TX>; + reset-names = "tx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s7_8ch: i2s@fddf8000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfddf8000 0x0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S7_8CH_RX>, <&cru MCLK_I2S7_8CH_RX>, <&cru HCLK_I2S7_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S7_8CH_RX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 21>; + dma-names = "rx"; + power-domains = <&power RK3588_PD_VO1>; + resets = <&cru SRST_M_I2S7_8CH_RX>; + reset-names = "rx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s10_8ch: i2s@fde00000 { + compatible = "rockchip,rk3588-i2s-tdm"; + reg = <0x0 0xfde00000 0x0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru MCLK_I2S10_8CH_RX>, <&cru MCLK_I2S10_8CH_RX>, <&cru HCLK_I2S10_8CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + assigned-clocks = <&cru CLK_I2S10_8CH_RX_SRC>; + assigned-clock-parents = <&cru PLL_AUPLL>; + dmas = <&dmac2 24>; + dma-names = "rx"; + power-domains = <&power RK3588_PD_VO1>; + resets = <&cru SRST_M_I2S10_8CH_RX>; + reset-names = "rx-m"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + pcie3x4: pcie@fe150000 { + compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0x0f>; + clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>, + <&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>, + <&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>; + clock-names = "aclk_mst", "aclk_slv", + "aclk_dbi", "pclk", + "aux", "pipe"; + device_type = "pci"; + interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "sys", "pmc", "msg", "legacy", "err"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie3x4_intc 0>, + <0 0 0 2 &pcie3x4_intc 1>, + <0 0 0 3 &pcie3x4_intc 2>, + <0 0 0 4 &pcie3x4_intc 3>; + linux,pci-domain = <0>; + max-link-speed = <3>; + msi-map = <0x0000 &its1 0x0000 0x1000>; + num-lanes = <4>; + phys = <&pcie30phy>; + phy-names = "pcie-phy"; + power-domains = <&power RK3588_PD_PCIE>; + ranges = <0x01000000 0x0 0xf0100000 0x0 0xf0100000 0x0 0x00100000>, + <0x02000000 0x0 0xf0200000 0x0 0xf0200000 0x0 0x00e00000>, + <0x03000000 0x0 0x40000000 0x9 0x00000000 0x0 0x40000000>; + reg = <0xa 0x40000000 0x0 0x00400000>, + <0x0 0xfe150000 0x0 0x00010000>, + <0x0 0xf0000000 0x0 0x00100000>; + reg-names = "dbi", "apb", "config"; + resets = <&cru SRST_PCIE0_POWER_UP>, <&cru SRST_P_PCIE0>; + reset-names = "pwr", "pipe"; + status = "disabled"; + + pcie3x4_intc: legacy-interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 260 IRQ_TYPE_EDGE_RISING 0>; + }; + }; + + pcie3x2: pcie@fe160000 { + compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x10 0x1f>; + clocks = <&cru ACLK_PCIE_2L_MSTR>, <&cru ACLK_PCIE_2L_SLV>, + <&cru ACLK_PCIE_2L_DBI>, <&cru PCLK_PCIE_2L>, + <&cru CLK_PCIE_AUX1>, <&cru CLK_PCIE2L_PIPE>; + clock-names = "aclk_mst", "aclk_slv", + "aclk_dbi", "pclk", + "aux", "pipe"; + device_type = "pci"; + interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "sys", "pmc", "msg", "legacy", "err"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie3x2_intc 0>, + <0 0 0 2 &pcie3x2_intc 1>, + <0 0 0 3 &pcie3x2_intc 2>, + <0 0 0 4 &pcie3x2_intc 3>; + linux,pci-domain = <1>; + max-link-speed = <3>; + msi-map = <0x1000 &its1 0x1000 0x1000>; + num-lanes = <2>; + phys = <&pcie30phy>; + phy-names = "pcie-phy"; + power-domains = <&power RK3588_PD_PCIE>; + ranges = <0x01000000 0x0 0xf1100000 0x0 0xf1100000 0x0 0x00100000>, + <0x02000000 0x0 0xf1200000 0x0 0xf1200000 0x0 0x00e00000>, + <0x03000000 0x0 0x40000000 0x9 0x40000000 0x0 0x40000000>; + reg = <0xa 0x40400000 0x0 0x00400000>, + <0x0 0xfe160000 0x0 0x00010000>, + <0x0 0xf1000000 0x0 0x00100000>; + reg-names = "dbi", "apb", "config"; + resets = <&cru SRST_PCIE1_POWER_UP>, <&cru SRST_P_PCIE1>; + reset-names = "pwr", "pipe"; + status = "disabled"; + + pcie3x2_intc: legacy-interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 255 IRQ_TYPE_EDGE_RISING 0>; + }; + }; + + pcie2x1l0: pcie@fe170000 { + compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie"; + bus-range = <0x20 0x2f>; + clocks = <&cru ACLK_PCIE_1L0_MSTR>, <&cru ACLK_PCIE_1L0_SLV>, + <&cru ACLK_PCIE_1L0_DBI>, <&cru PCLK_PCIE_1L0>, + <&cru CLK_PCIE_AUX2>, <&cru CLK_PCIE1L0_PIPE>; + clock-names = "aclk_mst", "aclk_slv", + "aclk_dbi", "pclk", + "aux", "pipe"; + device_type = "pci"; + interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "sys", "pmc", "msg", "legacy", "err"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie2x1l0_intc 0>, + <0 0 0 2 &pcie2x1l0_intc 1>, + <0 0 0 3 &pcie2x1l0_intc 2>, + <0 0 0 4 &pcie2x1l0_intc 3>; + linux,pci-domain = <2>; + max-link-speed = <2>; + msi-map = <0x2000 &its0 0x2000 0x1000>; + num-lanes = <1>; + phys = <&combphy1_ps PHY_TYPE_PCIE>; + phy-names = "pcie-phy"; + power-domains = <&power RK3588_PD_PCIE>; + ranges = <0x01000000 0x0 0xf2100000 0x0 0xf2100000 0x0 0x00100000>, + <0x02000000 0x0 0xf2200000 0x0 0xf2200000 0x0 0x00e00000>, + <0x03000000 0x0 0x40000000 0x9 0x80000000 0x0 0x40000000>; + reg = <0xa 0x40800000 0x0 0x00400000>, + <0x0 0xfe170000 0x0 0x00010000>, + <0x0 0xf2000000 0x0 0x00100000>; + reg-names = "dbi", "apb", "config"; + resets = <&cru SRST_PCIE2_POWER_UP>, <&cru SRST_P_PCIE2>; + reset-names = "pwr", "pipe"; + #address-cells = <3>; + #size-cells = <2>; + status = "disabled"; + + pcie2x1l0_intc: legacy-interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 240 IRQ_TYPE_EDGE_RISING 0>; + }; + }; + + gmac0: ethernet@fe1b0000 { + compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a"; + reg = <0x0 0xfe1b0000 0x0 0x10000>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "macirq", "eth_wake_irq"; + clocks = <&cru CLK_GMAC_125M>, <&cru CLK_GMAC_50M>, + <&cru PCLK_GMAC0>, <&cru ACLK_GMAC0>, + <&cru CLK_GMAC0_PTP_REF>; + clock-names = "stmmaceth", "clk_mac_ref", + "pclk_mac", "aclk_mac", + "ptp_ref"; + power-domains = <&power RK3588_PD_GMAC>; + resets = <&cru SRST_A_GMAC0>; + reset-names = "stmmaceth"; + rockchip,grf = <&sys_grf>; + rockchip,php-grf = <&php_grf>; + snps,axi-config = <&gmac0_stmmac_axi_setup>; + snps,mixed-burst; + snps,mtl-rx-config = <&gmac0_mtl_rx_setup>; + snps,mtl-tx-config = <&gmac0_mtl_tx_setup>; + snps,tso; + status = "disabled"; + + mdio0: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <0x1>; + #size-cells = <0x0>; + }; + + gmac0_stmmac_axi_setup: stmmac-axi-config { + snps,blen = <0 0 0 0 16 8 4>; + snps,wr_osr_lmt = <4>; + snps,rd_osr_lmt = <8>; + }; + + gmac0_mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <2>; + queue0 {}; + queue1 {}; + }; + + gmac0_mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <2>; + queue0 {}; + queue1 {}; + }; + }; + + sata1: sata@fe220000 { + compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci"; + reg = <0 0xfe220000 0 0x1000>; + interrupts = <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_SATA1>, <&cru CLK_PMALIVE1>, + <&cru CLK_RXOOB1>, <&cru CLK_PIPEPHY1_REF>, + <&cru CLK_PIPEPHY1_PIPE_ASIC_G>; + clock-names = "sata", "pmalive", "rxoob", "ref", "asic"; + ports-implemented = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata-port@0 { + reg = <0>; + hba-port-cap = <HBA_PORT_FBSCP>; + phys = <&combphy1_ps PHY_TYPE_SATA>; + phy-names = "sata-phy"; + snps,rx-ts-max = <32>; + snps,tx-ts-max = <32>; + }; + }; + + combphy1_ps: phy@fee10000 { + compatible = "rockchip,rk3588-naneng-combphy"; + reg = <0x0 0xfee10000 0x0 0x100>; + clocks = <&cru CLK_REF_PIPE_PHY1>, <&cru PCLK_PCIE_COMBO_PIPE_PHY1>, + <&cru PCLK_PHP_ROOT>; + clock-names = "ref", "apb", "pipe"; + assigned-clocks = <&cru CLK_REF_PIPE_PHY1>; + assigned-clock-rates = <100000000>; + #phy-cells = <1>; + resets = <&cru SRST_REF_PIPE_PHY1>, <&cru SRST_P_PCIE2_PHY1>; + reset-names = "phy", "apb"; + rockchip,pipe-grf = <&php_grf>; + rockchip,pipe-phy-grf = <&pipe_phy1_grf>; + status = "disabled"; + }; + + pcie30phy: phy@fee80000 { + compatible = "rockchip,rk3588-pcie3-phy"; + reg = <0x0 0xfee80000 0x0 0x20000>; + #phy-cells = <0>; + clocks = <&cru PCLK_PCIE_COMBO_PIPE_PHY>; + clock-names = "pclk"; + resets = <&cru SRST_PCIE30_PHY>; + reset-names = "phy"; + rockchip,pipe-grf = <&php_grf>; + rockchip,phy-grf = <&pcie30_phy_grf>; + status = "disabled"; + }; +}; |