diff options
Diffstat (limited to 'arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi | 86 |
1 files changed, 82 insertions, 4 deletions
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi index 623c8421525d..54fc5c4f8c3f 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi @@ -13,9 +13,10 @@ / { memory@80000000 { device_type = "memory"; + bootph-all; /* 16 GB RAM */ - reg = <0x00 0x80000000 0x00 0x80000000>, - <0x08 0x80000000 0x03 0x80000000>; + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000003 0x80000000>; }; /* Reserving memory regions still pending */ @@ -133,13 +134,13 @@ }; }; - mux0: mux-controller { + mux0: mux-controller-0 { compatible = "gpio-mux"; #mux-state-cells = <1>; mux-gpios = <&exp_som 1 GPIO_ACTIVE_HIGH>; }; - mux1: mux-controller { + mux1: mux-controller-1 { compatible = "gpio-mux"; #mux-state-cells = <1>; mux-gpios = <&exp_som 2 GPIO_ACTIVE_HIGH>; @@ -169,6 +170,7 @@ J721S2_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (E18) MCU_OSPI0_DQS */ J721S2_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (E20) MCU_OSPI0_LBCLKO */ >; + bootph-all; }; }; @@ -187,6 +189,7 @@ J721S2_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (H24) WKUP_I2C0_SCL */ J721S2_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (H27) WKUP_I2C0_SDA */ >; + bootph-pre-ram; }; }; @@ -439,11 +442,53 @@ spi-tx-bus-width = <8>; spi-rx-bus-width = <8>; spi-max-frequency = <25000000>; + bootph-all; cdns,tshsl-ns = <60>; cdns,tsd2d-ns = <60>; cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ospi.tiboot3"; + reg = <0x0 0x80000>; + }; + + partition@80000 { + label = "ospi.tispl"; + reg = <0x80000 0x200000>; + }; + + partition@280000 { + label = "ospi.u-boot"; + reg = <0x280000 0x400000>; + }; + + partition@680000 { + label = "ospi.env"; + reg = <0x680000 0x40000>; + }; + + partition@6c0000 { + label = "ospi.env.backup"; + reg = <0x6c0000 0x40000>; + }; + + partition@800000 { + label = "ospi.rootfs"; + reg = <0x800000 0x37c0000>; + }; + + partition@3fc0000 { + label = "ospi.phypattern"; + reg = <0x3fc0000 0x40000>; + }; + }; }; }; @@ -515,6 +560,39 @@ <&mcu_r5fss0_core1_memory_region>; }; +&main_r5fss0 { + ti,cluster-mode = <0>; +}; + +&main_r5fss1 { + ti,cluster-mode = <0>; +}; + +/* Timers are used by Remoteproc firmware */ +&main_timer0 { + status = "reserved"; +}; + +&main_timer1 { + status = "reserved"; +}; + +&main_timer2 { + status = "reserved"; +}; + +&main_timer3 { + status = "reserved"; +}; + +&main_timer4 { + status = "reserved"; +}; + +&main_timer5 { + status = "reserved"; +}; + &main_r5fss0_core0 { mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, |