diff options
Diffstat (limited to 'arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso')
| -rw-r--r-- | arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso | 78 |
1 files changed, 73 insertions, 5 deletions
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso index f88b71f5b07a..a74d0ac7e07a 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso @@ -17,6 +17,17 @@ /plugin/; &{/} { + compatible = "xlnx,zynqmp-sk-kv260-rev2", + "xlnx,zynqmp-sk-kv260-rev1", + "xlnx,zynqmp-sk-kv260-revB", + "xlnx,zynqmp-sk-kv260", "xlnx,zynqmp"; + model = "ZynqMP KV260 revB"; + + ina260-u14 { + compatible = "iio-hwmon"; + io-channels = <&u14 0>, <&u14 1>, <&u14 2>; + }; + si5332_0: si5332-0 { /* u17 */ compatible = "fixed-clock"; #clock-cells = <0>; @@ -52,6 +63,18 @@ #clock-cells = <0>; clock-frequency = <27000000>; }; + + dpcon { + compatible = "dp-connector"; + label = "P11"; + type = "full-size"; + + port { + dpcon_in: endpoint { + remote-endpoint = <&dpsub_dp_out>; + }; + }; + }; }; &i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */ @@ -63,8 +86,13 @@ scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - /* u14 - 0x40 - ina260 */ - /* u43 - 0x2d - usb5744 */ + u14: ina260@40 { /* u14 */ + compatible = "ti,ina260"; + #io-channel-cells = <1>; + label = "ina260-u14"; + reg = <0x40>; + }; + /* u43 - 0x2d - USB hub */ /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */ }; @@ -81,6 +109,14 @@ phy-names = "dp-phy0", "dp-phy1"; phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>; assigned-clock-rates = <27000000>, <25000000>, <300000000>; + + ports { + port@5 { + dpsub_dp_out: endpoint { + remote-endpoint = <&dpcon_in>; + }; + }; + }; }; &zynqmp_dpdma { @@ -94,6 +130,7 @@ pinctrl-0 = <&pinctrl_usb0_default>; phy-names = "usb3-phy"; phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; + assigned-clock-rates = <250000000>, <20000000>; }; &dwc3_0 { @@ -122,7 +159,7 @@ bus-width = <4>; }; -&gem3 { /* required by spec */ +&gem3 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gem3_default>; @@ -149,9 +186,28 @@ }; }; -&pinctrl0 { /* required by spec */ +&pinctrl0 { status = "okay"; + pinctrl_gpio0_default: gpio0-default { + conf { + groups = "gpio0_38_grp"; + bias-pull-up; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + mux { + groups = "gpio0_38_grp"; + function = "gpio0"; + }; + + conf-tx { + pins = "MIO38"; + bias-disable; + output-enable; + }; + }; + pinctrl_uart1_default: uart1-default { conf { groups = "uart1_9_grp"; @@ -168,6 +224,7 @@ conf-tx { pins = "MIO36"; bias-disable; + output-enable; }; mux { @@ -190,7 +247,7 @@ }; }; - pinctrl_i2c1_gpio: i2c1-gpio { + pinctrl_i2c1_gpio: i2c1-gpio-grp { conf { groups = "gpio0_24_grp", "gpio0_25_grp"; slew-rate = <SLEW_RATE_SLOW>; @@ -219,6 +276,7 @@ conf-bootstrap { pins = "MIO71", "MIO73", "MIO75"; bias-disable; + output-enable; low-power-disable; }; @@ -226,6 +284,7 @@ pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68", "MIO69"; bias-disable; + output-enable; low-power-enable; }; @@ -234,6 +293,7 @@ slew-rate = <SLEW_RATE_SLOW>; power-source = <IO_STANDARD_LVCMOS18>; bias-disable; + output-enable; }; mux-mdio { @@ -264,6 +324,7 @@ pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", "MIO60", "MIO61", "MIO62", "MIO63"; bias-disable; + output-enable; drive-strength = <4>; slew-rate = <SLEW_RATE_SLOW>; }; @@ -280,6 +341,7 @@ slew-rate = <SLEW_RATE_SLOW>; power-source = <IO_STANDARD_LVCMOS18>; bias-disable; + output-enable; }; conf-cd { @@ -302,6 +364,12 @@ }; }; +&gpio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio0_default>; +}; + &uart1 { status = "okay"; pinctrl-names = "default"; |