diff options
Diffstat (limited to 'arch/arm64/boot')
75 files changed, 2559 insertions, 350 deletions
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts index caf8b6fbe5e3..d06e34b5d192 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts @@ -61,13 +61,6 @@ chosen { stdout-path = "serial0:115200n8"; }; - - reg_vcc3v3: vcc3v3 { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; }; &ehci0 { @@ -91,7 +84,7 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; - vmmc-supply = <®_vcc3v3>; + vmmc-supply = <®_dcdc1>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; cd-inverted; disable-wp; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index c2b9bcb0ef61..6804936f2459 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -15,6 +15,7 @@ */ /dts-v1/; +#include <dt-bindings/reset/altr,rst-mgr-s10.h> / { compatible = "altr,socfpga-stratix10"; @@ -75,10 +76,10 @@ compatible = "arm,gic-400", "arm,cortex-a15-gic"; #interrupt-cells = <3>; interrupt-controller; - reg = <0x0 0xfffc1000 0x1000>, - <0x0 0xfffc2000 0x2000>, - <0x0 0xfffc4000 0x2000>, - <0x0 0xfffc6000 0x2000>; + reg = <0x0 0xfffc1000 0x0 0x1000>, + <0x0 0xfffc2000 0x0 0x2000>, + <0x0 0xfffc4000 0x0 0x2000>, + <0x0 0xfffc6000 0x0 0x2000>; }; soc { @@ -100,6 +101,8 @@ interrupts = <0 90 4>; interrupt-names = "macirq"; mac-address = [00 00 00 00 00 00]; + resets = <&rst EMAC0_RESET>; + reset-names = "stmmaceth"; status = "disabled"; }; @@ -109,6 +112,8 @@ interrupts = <0 91 4>; interrupt-names = "macirq"; mac-address = [00 00 00 00 00 00]; + resets = <&rst EMAC1_RESET>; + reset-names = "stmmaceth"; status = "disabled"; }; @@ -118,6 +123,8 @@ interrupts = <0 92 4>; interrupt-names = "macirq"; mac-address = [00 00 00 00 00 00]; + resets = <&rst EMAC2_RESET>; + reset-names = "stmmaceth"; status = "disabled"; }; @@ -126,6 +133,7 @@ #size-cells = <0>; compatible = "snps,dw-apb-gpio"; reg = <0xffc03200 0x100>; + resets = <&rst GPIO0_RESET>; status = "disabled"; porta: gpio-controller@0 { @@ -145,6 +153,7 @@ #size-cells = <0>; compatible = "snps,dw-apb-gpio"; reg = <0xffc03300 0x100>; + resets = <&rst GPIO1_RESET>; status = "disabled"; portb: gpio-controller@0 { @@ -165,6 +174,7 @@ compatible = "snps,designware-i2c"; reg = <0xffc02800 0x100>; interrupts = <0 103 4>; + resets = <&rst I2C0_RESET>; status = "disabled"; }; @@ -174,6 +184,7 @@ compatible = "snps,designware-i2c"; reg = <0xffc02900 0x100>; interrupts = <0 104 4>; + resets = <&rst I2C1_RESET>; status = "disabled"; }; @@ -183,6 +194,7 @@ compatible = "snps,designware-i2c"; reg = <0xffc02a00 0x100>; interrupts = <0 105 4>; + resets = <&rst I2C2_RESET>; status = "disabled"; }; @@ -192,6 +204,7 @@ compatible = "snps,designware-i2c"; reg = <0xffc02b00 0x100>; interrupts = <0 106 4>; + resets = <&rst I2C3_RESET>; status = "disabled"; }; @@ -201,6 +214,7 @@ compatible = "snps,designware-i2c"; reg = <0xffc02c00 0x100>; interrupts = <0 107 4>; + resets = <&rst I2C4_RESET>; status = "disabled"; }; @@ -211,6 +225,8 @@ reg = <0xff808000 0x1000>; interrupts = <0 96 4>; fifo-depth = <0x400>; + resets = <&rst SDMMC_RESET>; + reset-names = "reset"; status = "disabled"; }; @@ -223,6 +239,7 @@ #reset-cells = <1>; compatible = "altr,rst-mgr"; reg = <0xffd11000 0x1000>; + altr,modrst-offset = <0x20>; }; spi0: spi@ffda4000 { @@ -291,6 +308,7 @@ interrupts = <0 108 4>; reg-shift = <2>; reg-io-width = <4>; + resets = <&rst UART0_RESET>; status = "disabled"; }; @@ -300,6 +318,7 @@ interrupts = <0 109 4>; reg-shift = <2>; reg-io-width = <4>; + resets = <&rst UART1_RESET>; status = "disabled"; }; @@ -315,6 +334,8 @@ interrupts = <0 93 4>; phys = <&usbphy0>; phy-names = "usb2-phy"; + resets = <&rst USB0_RESET>; + reset-names = "dwc2"; status = "disabled"; }; @@ -324,6 +345,8 @@ interrupts = <0 94 4>; phys = <&usbphy0>; phy-names = "usb2-phy"; + resets = <&rst USB1_RESET>; + reset-names = "dwc2"; status = "disabled"; }; @@ -331,6 +354,7 @@ compatible = "snps,dw-wdt"; reg = <0xffd00200 0x100>; interrupts = <0 117 4>; + resets = <&rst WATCHDOG0_RESET>; status = "disabled"; }; @@ -338,6 +362,7 @@ compatible = "snps,dw-wdt"; reg = <0xffd00300 0x100>; interrupts = <0 118 4>; + resets = <&rst WATCHDOG1_RESET>; status = "disabled"; }; @@ -345,6 +370,7 @@ compatible = "snps,dw-wdt"; reg = <0xffd00400 0x100>; interrupts = <0 125 4>; + resets = <&rst WATCHDOG2_RESET>; status = "disabled"; }; @@ -352,6 +378,7 @@ compatible = "snps,dw-wdt"; reg = <0xffd00500 0x100>; interrupts = <0 126 4>; + resets = <&rst WATCHDOG3_RESET>; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts index 41ea2dba2fce..46f27edaa08e 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -14,7 +14,7 @@ * this program. If not, see <http://www.gnu.org/licenses/>. */ -/include/ "socfpga_stratix10.dtsi" +#include "socfpga_stratix10.dtsi" / { model = "SoCFPGA Stratix 10 SoCDK"; @@ -34,6 +34,44 @@ }; }; +&gmac0 { + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + + max-frame-size = <3800>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <4>; + + txd0-skew-ps = <0>; /* -420ps */ + txd1-skew-ps = <0>; /* -420ps */ + txd2-skew-ps = <0>; /* -420ps */ + txd3-skew-ps = <0>; /* -420ps */ + rxd0-skew-ps = <420>; /* 0ps */ + rxd1-skew-ps = <420>; /* 0ps */ + rxd2-skew-ps = <420>; /* 0ps */ + rxd3-skew-ps = <420>; /* 0ps */ + txen-skew-ps = <0>; /* -420ps */ + txc-skew-ps = <1860>; /* 960ps */ + rxdv-skew-ps = <420>; /* 0ps */ + rxc-skew-ps = <1680>; /* 780ps */ + }; + }; +}; + +&mmc { + status = "okay"; + num-slots = <1>; + cap-sd-highspeed; + broken-cd; + bus-width = <4>; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index c89010e56488..4157987f4a3d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -168,7 +168,8 @@ &sd_emmc_a { status = "okay"; pinctrl-0 = <&sdio_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; #address-cells = <1>; #size-cells = <0>; @@ -194,7 +195,8 @@ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; @@ -212,10 +214,10 @@ &sd_emmc_c { status = "okay"; pinctrl-0 = <&emmc_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <8>; - cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <200000000>; non-removable; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts index 9697a7a79464..4b17a76959b2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts @@ -107,6 +107,9 @@ states = <3300000 0>, <1800000 1>; + + regulator-settling-time-up-us = <100>; + regulator-settling-time-down-us = <5000>; }; wifi_32k: wifi-32k { @@ -250,7 +253,8 @@ &sd_emmc_a { status = "okay"; pinctrl-0 = <&sdio_pins>, <&sdio_irq_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; #address-cells = <1>; #size-cells = <0>; @@ -276,11 +280,16 @@ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + max-frequency = <200000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; @@ -294,10 +303,10 @@ &sd_emmc_c { status = "disabled"; pinctrl-0 = <&emmc_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <8>; - cap-sd-highspeed; max-frequency = <200000000>; non-removable; disable-wp; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts index 9c59c3c6d1b6..38dfdde5c147 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts @@ -51,7 +51,7 @@ / { compatible = "nexbox,a95x", "amlogic,meson-gxbb"; model = "NEXBOX A95X"; - + aliases { serial0 = &uart_AO; }; @@ -232,7 +232,8 @@ &sd_emmc_a { status = "okay"; pinctrl-0 = <&sdio_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; #address-cells = <1>; #size-cells = <0>; @@ -253,7 +254,8 @@ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; @@ -271,10 +273,10 @@ &sd_emmc_c { status = "okay"; pinctrl-0 = <&emmc_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <8>; - cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <200000000>; non-removable; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index d147c853ab05..1ffa1c238a72 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -50,7 +50,7 @@ / { compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb"; model = "Hardkernel ODROID-C2"; - + aliases { serial0 = &uart_AO; }; @@ -253,7 +253,8 @@ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; @@ -271,10 +272,10 @@ &sd_emmc_c { status = "okay"; pinctrl-0 = <&emmc_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <8>; - cap-sd-highspeed; max-frequency = <200000000>; non-removable; disable-wp; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi index 81ffc689a5bf..23c08c3afd0a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi @@ -194,7 +194,8 @@ &sd_emmc_a { status = "okay"; pinctrl-0 = <&sdio_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; #address-cells = <1>; #size-cells = <0>; @@ -220,10 +221,14 @@ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; max-frequency = <100000000>; disable-wp; @@ -238,10 +243,10 @@ &sd_emmc_c { status = "okay"; pinctrl-0 = <&emmc_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <8>; - cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <200000000>; non-removable; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi index 346753fb6324..f2bc6dea1fc6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi @@ -155,7 +155,8 @@ &sd_emmc_a { status = "okay"; pinctrl-0 = <&sdio_pins &sdio_irq_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; #address-cells = <1>; #size-cells = <0>; @@ -181,7 +182,8 @@ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; @@ -198,10 +200,10 @@ &sd_emmc_c { status = "okay"; pinctrl-0 = <&emmc_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <8>; - cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <200000000>; non-removable; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 52f1687e7a09..af834cdbba79 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -392,6 +392,17 @@ }; }; + emmc_clk_gate_pins: emmc_clk_gate { + mux { + groups = "BOOT_8"; + function = "gpio_periphs"; + }; + cfg-pull-down { + pins = "BOOT_8"; + bias-pull-down; + }; + }; + nor_pins: nor { mux { groups = "nor_d", @@ -430,6 +441,17 @@ }; }; + sdcard_clk_gate_pins: sdcard_clk_gate { + mux { + groups = "CARD_2"; + function = "gpio_periphs"; + }; + cfg-pull-down { + pins = "CARD_2"; + bias-pull-down; + }; + }; + sdio_pins: sdio { mux { groups = "sdio_d0", @@ -442,6 +464,17 @@ }; }; + sdio_clk_gate_pins: sdio_clk_gate { + mux { + groups = "GPIOX_4"; + function = "gpio_periphs"; + }; + cfg-pull-down { + pins = "GPIOX_4"; + bias-pull-down; + }; + }; + sdio_irq_pins: sdio_irq { mux { groups = "sdio_irq"; @@ -661,21 +694,21 @@ &sd_emmc_a { clocks = <&clkc CLKID_SD_EMMC_A>, - <&xtal>, + <&clkc CLKID_SD_EMMC_A_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; }; &sd_emmc_b { clocks = <&clkc CLKID_SD_EMMC_B>, - <&xtal>, + <&clkc CLKID_SD_EMMC_B_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; }; &sd_emmc_c { clocks = <&clkc CLKID_SD_EMMC_C>, - <&xtal>, + <&clkc CLKID_SD_EMMC_C_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts index 2a5804ce7f4b..977b4240f3c1 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts @@ -123,7 +123,8 @@ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; @@ -141,10 +142,10 @@ &sd_emmc_c { status = "okay"; pinctrl-0 = <&emmc_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <8>; - cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <100000000>; non-removable; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index 69ca14ac10fa..64c54c92e214 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -91,6 +91,9 @@ states = <3300000 0>, <1800000 1>; + + regulator-settling-time-up-us = <200>; + regulator-settling-time-down-us = <50000>; }; vddio_boot: regulator-vddio_boot { @@ -197,10 +200,14 @@ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; max-frequency = <100000000>; disable-wp; @@ -215,10 +222,12 @@ &sd_emmc_c { status = "okay"; pinctrl-0 = <&emmc_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <8>; cap-mmc-highspeed; + mmc-ddr-3_3v; max-frequency = <50000000>; non-removable; disable-wp; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts index 4c2ac7650fcd..1b8f32867aa1 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts @@ -189,7 +189,8 @@ &sd_emmc_a { status = "okay"; pinctrl-0 = <&sdio_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; #address-cells = <1>; #size-cells = <0>; @@ -210,7 +211,8 @@ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; @@ -228,10 +230,10 @@ &sd_emmc_c { status = "okay"; pinctrl-0 = <&emmc_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <8>; - cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <200000000>; non-removable; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi index f3eea8e89d12..129af9068814 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi @@ -95,7 +95,8 @@ &sd_emmc_a { status = "okay"; pinctrl-0 = <&sdio_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; #address-cells = <1>; #size-cells = <0>; @@ -116,7 +117,8 @@ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; @@ -134,10 +136,10 @@ &sd_emmc_c { status = "okay"; pinctrl-0 = <&emmc_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <8>; - cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <200000000>; non-removable; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index d6876e64979e..d8dd3298b15c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -281,6 +281,17 @@ }; }; + emmc_clk_gate_pins: emmc_clk_gate { + mux { + groups = "BOOT_8"; + function = "gpio_periphs"; + }; + cfg-pull-down { + pins = "BOOT_8"; + bias-pull-down; + }; + }; + nor_pins: nor { mux { groups = "nor_d", @@ -319,6 +330,17 @@ }; }; + sdcard_clk_gate_pins: sdcard_clk_gate { + mux { + groups = "CARD_2"; + function = "gpio_periphs"; + }; + cfg-pull-down { + pins = "CARD_2"; + bias-pull-down; + }; + }; + sdio_pins: sdio { mux { groups = "sdio_d0", @@ -331,6 +353,17 @@ }; }; + sdio_clk_gate_pins: sdio_clk_gate { + mux { + groups = "GPIOX_4"; + function = "gpio_periphs"; + }; + cfg-pull-down { + pins = "GPIOX_4"; + bias-pull-down; + }; + }; + sdio_irq_pins: sdio_irq { mux { groups = "sdio_irq"; @@ -603,21 +636,21 @@ &sd_emmc_a { clocks = <&clkc CLKID_SD_EMMC_A>, - <&xtal>, + <&clkc CLKID_SD_EMMC_A_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; }; &sd_emmc_b { clocks = <&clkc CLKID_SD_EMMC_B>, - <&xtal>, + <&clkc CLKID_SD_EMMC_B_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; }; &sd_emmc_c { clocks = <&clkc CLKID_SD_EMMC_C>, - <&xtal>, + <&clkc CLKID_SD_EMMC_C_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index 9b10c5f4f8c0..22c697732f66 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts @@ -175,7 +175,8 @@ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; @@ -193,10 +194,10 @@ &sd_emmc_c { status = "okay"; pinctrl-0 = <&emmc_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <8>; - cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <200000000>; non-removable; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts index 08f1dd69b679..470f72bb863c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts @@ -220,7 +220,6 @@ pinctrl-names = "default"; bus-width = <8>; - cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <200000000>; non-removable; diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi index c9ffffb96e43..d8ecd1661461 100644 --- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi +++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi @@ -19,7 +19,7 @@ #address-cells = <2>; #size-cells = <0>; - cpu@000 { + cpu@0 { device_type = "cpu"; compatible = "apm,strega", "arm,armv8"; reg = <0x0 0x000>; @@ -29,7 +29,7 @@ #clock-cells = <1>; clocks = <&pmd0clk 0>; }; - cpu@001 { + cpu@1 { device_type = "cpu"; compatible = "apm,strega", "arm,armv8"; reg = <0x0 0x001>; @@ -125,7 +125,7 @@ <0x0 0x780a0000 0x0 0x20000>, /* GIC CPU */ <0x0 0x780c0000 0x0 0x10000>, /* GIC VCPU Control */ <0x0 0x780e0000 0x0 0x20000>; /* GIC VCPU */ - v2m0: v2m@00000 { + v2m0: v2m@0 { compatible = "arm,gic-v2m-frame"; msi-controller; reg = <0x0 0x0 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi index c09a36fed917..00e82b8e9a19 100644 --- a/arch/arm64/boot/dts/apm/apm-storm.dtsi +++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi @@ -19,7 +19,7 @@ #address-cells = <2>; #size-cells = <0>; - cpu@000 { + cpu@0 { device_type = "cpu"; compatible = "apm,potenza", "arm,armv8"; reg = <0x0 0x000>; @@ -27,7 +27,7 @@ cpu-release-addr = <0x1 0x0000fff8>; next-level-cache = <&xgene_L2_0>; }; - cpu@001 { + cpu@1 { device_type = "cpu"; compatible = "apm,potenza", "arm,armv8"; reg = <0x0 0x001>; diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile index 75cc2aa10101..25f82c377f67 100644 --- a/arch/arm64/boot/dts/arm/Makefile +++ b/arch/arm64/boot/dts/arm/Makefile @@ -1,4 +1,6 @@ -dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb foundation-v8-gicv3.dtb +dtb-$(CONFIG_ARCH_VEXPRESS) += \ + foundation-v8.dtb foundation-v8-psci.dtb \ + foundation-v8-gicv3.dtb foundation-v8-gicv3-psci.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb juno-r2.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2f-1xv7-ca53x2.dtb diff --git a/arch/arm64/boot/dts/arm/foundation-v8-gicv2.dtsi b/arch/arm64/boot/dts/arm/foundation-v8-gicv2.dtsi new file mode 100644 index 000000000000..851abf34fc80 --- /dev/null +++ b/arch/arm64/boot/dts/arm/foundation-v8-gicv2.dtsi @@ -0,0 +1,19 @@ +/* + * ARM Ltd. + * + * ARMv8 Foundation model DTS (GICv2 configuration) + */ + +/ { + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <2>; + interrupt-controller; + reg = <0x0 0x2c001000 0 0x1000>, + <0x0 0x2c002000 0 0x2000>, + <0x0 0x2c004000 0 0x2000>, + <0x0 0x2c006000 0 0x2000>; + interrupts = <1 9 0xf04>; + }; +}; diff --git a/arch/arm64/boot/dts/arm/foundation-v8-gicv3-psci.dts b/arch/arm64/boot/dts/arm/foundation-v8-gicv3-psci.dts new file mode 100644 index 000000000000..e096e670bec3 --- /dev/null +++ b/arch/arm64/boot/dts/arm/foundation-v8-gicv3-psci.dts @@ -0,0 +1,9 @@ +/* + * ARM Ltd. + * + * ARMv8 Foundation model DTS (GICv3+PSCI configuration) + */ + +#include "foundation-v8.dtsi" +#include "foundation-v8-gicv3.dtsi" +#include "foundation-v8-psci.dtsi" diff --git a/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts b/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts index 35588dfa095c..c5d834d7d0ba 100644 --- a/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts +++ b/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts @@ -5,26 +5,5 @@ */ #include "foundation-v8.dtsi" - -/ { - gic: interrupt-controller@2f000000 { - compatible = "arm,gic-v3"; - #interrupt-cells = <3>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - interrupt-controller; - reg = <0x0 0x2f000000 0x0 0x10000>, - <0x0 0x2f100000 0x0 0x200000>, - <0x0 0x2c000000 0x0 0x2000>, - <0x0 0x2c010000 0x0 0x2000>, - <0x0 0x2c02f000 0x0 0x2000>; - interrupts = <1 9 4>; - - its: its@2f020000 { - compatible = "arm,gic-v3-its"; - msi-controller; - reg = <0x0 0x2f020000 0x0 0x20000>; - }; - }; -}; +#include "foundation-v8-gicv3.dtsi" +#include "foundation-v8-spin-table.dtsi" diff --git a/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dtsi b/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dtsi new file mode 100644 index 000000000000..91fc5c60d88b --- /dev/null +++ b/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dtsi @@ -0,0 +1,28 @@ +/* + * ARM Ltd. + * + * ARMv8 Foundation model DTS (GICv3 configuration) + */ + +/ { + gic: interrupt-controller@2f000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + interrupt-controller; + reg = <0x0 0x2f000000 0x0 0x10000>, + <0x0 0x2f100000 0x0 0x200000>, + <0x0 0x2c000000 0x0 0x2000>, + <0x0 0x2c010000 0x0 0x2000>, + <0x0 0x2c02f000 0x0 0x2000>; + interrupts = <1 9 4>; + + its: its@2f020000 { + compatible = "arm,gic-v3-its"; + msi-controller; + reg = <0x0 0x2f020000 0x0 0x20000>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/arm/foundation-v8-psci.dts b/arch/arm64/boot/dts/arm/foundation-v8-psci.dts new file mode 100644 index 000000000000..723f23c7cd31 --- /dev/null +++ b/arch/arm64/boot/dts/arm/foundation-v8-psci.dts @@ -0,0 +1,9 @@ +/* + * ARM Ltd. + * + * ARMv8 Foundation model DTS (GICv2+PSCI configuration) + */ + +#include "foundation-v8.dtsi" +#include "foundation-v8-gicv2.dtsi" +#include "foundation-v8-psci.dtsi" diff --git a/arch/arm64/boot/dts/arm/foundation-v8-psci.dtsi b/arch/arm64/boot/dts/arm/foundation-v8-psci.dtsi new file mode 100644 index 000000000000..16cdf395728b --- /dev/null +++ b/arch/arm64/boot/dts/arm/foundation-v8-psci.dtsi @@ -0,0 +1,28 @@ +/* + * ARM Ltd. + * + * ARMv8 Foundation model DTS (PSCI configuration) + */ + +/ { + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; +}; + +&cpu0 { + enable-method = "psci"; +}; + +&cpu1 { + enable-method = "psci"; +}; + +&cpu2 { + enable-method = "psci"; +}; + +&cpu3 { + enable-method = "psci"; +}; diff --git a/arch/arm64/boot/dts/arm/foundation-v8-spin-table.dtsi b/arch/arm64/boot/dts/arm/foundation-v8-spin-table.dtsi new file mode 100644 index 000000000000..4d4186ba0e8c --- /dev/null +++ b/arch/arm64/boot/dts/arm/foundation-v8-spin-table.dtsi @@ -0,0 +1,25 @@ +/* + * ARM Ltd. + * + * ARMv8 Foundation model DTS (spin table configuration) + */ + +&cpu0 { + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; +}; + +&cpu1 { + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; +}; + +&cpu2 { + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; +}; + +&cpu3 { + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; +}; diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dts b/arch/arm64/boot/dts/arm/foundation-v8.dts index 71168077312d..8ff7c86fc929 100644 --- a/arch/arm64/boot/dts/arm/foundation-v8.dts +++ b/arch/arm64/boot/dts/arm/foundation-v8.dts @@ -5,17 +5,5 @@ */ #include "foundation-v8.dtsi" - -/ { - gic: interrupt-controller@2c001000 { - compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - #address-cells = <2>; - interrupt-controller; - reg = <0x0 0x2c001000 0 0x1000>, - <0x0 0x2c002000 0 0x2000>, - <0x0 0x2c004000 0 0x2000>, - <0x0 0x2c006000 0 0x2000>; - interrupts = <1 9 0xf04>; - }; -}; +#include "foundation-v8-gicv2.dtsi" +#include "foundation-v8-spin-table.dtsi" diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dtsi b/arch/arm64/boot/dts/arm/foundation-v8.dtsi index 8ecdd4331980..78a99b58e88a 100644 --- a/arch/arm64/boot/dts/arm/foundation-v8.dtsi +++ b/arch/arm64/boot/dts/arm/foundation-v8.dtsi @@ -28,36 +28,28 @@ #address-cells = <2>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,armv8"; reg = <0x0 0x0>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x8000fff8>; next-level-cache = <&L2_0>; }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,armv8"; reg = <0x0 0x1>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x8000fff8>; next-level-cache = <&L2_0>; }; - cpu@2 { + cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,armv8"; reg = <0x0 0x2>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x8000fff8>; next-level-cache = <&L2_0>; }; - cpu@3 { + cpu3: cpu@3 { device_type = "cpu"; compatible = "arm,armv8"; reg = <0x0 0x3>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x8000fff8>; next-level-cache = <&L2_0>; }; @@ -97,7 +89,7 @@ timeout-sec = <30>; }; - smb@08000000 { + smb@8000000 { compatible = "arm,vexpress,v2m-p1", "simple-bus"; arm,v2m-memory-map = "rs1"; #address-cells = <2>; /* SMB chipselect number and offset */ @@ -189,12 +181,12 @@ #size-cells = <1>; ranges = <0 3 0 0x200000>; - v2m_sysreg: sysreg@010000 { + v2m_sysreg: sysreg@10000 { compatible = "arm,vexpress-sysreg"; reg = <0x010000 0x1000>; }; - v2m_serial0: uart@090000 { + v2m_serial0: uart@90000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x090000 0x1000>; interrupts = <5>; @@ -202,7 +194,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial1: uart@0a0000 { + v2m_serial1: uart@a0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0a0000 0x1000>; interrupts = <6>; @@ -210,7 +202,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial2: uart@0b0000 { + v2m_serial2: uart@b0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0b0000 0x1000>; interrupts = <7>; @@ -218,7 +210,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial3: uart@0c0000 { + v2m_serial3: uart@c0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0c0000 0x1000>; interrupts = <8>; @@ -226,7 +218,7 @@ clock-names = "uartclk", "apb_pclk"; }; - virtio-block@0130000 { + virtio-block@130000 { compatible = "virtio,mmio"; reg = <0x130000 0x200>; interrupts = <42>; diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts index a83ed2c6bbf7..a1b73f46b625 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts +++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts @@ -104,7 +104,7 @@ <0 63 4>; }; - smb@08000000 { + smb@8000000 { compatible = "simple-bus"; #address-cells = <2>; diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi index 528875c75598..6cadb779729d 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi @@ -60,14 +60,14 @@ #size-cells = <1>; ranges = <0 3 0 0x200000>; - v2m_sysreg: sysreg@010000 { + v2m_sysreg: sysreg@10000 { compatible = "arm,vexpress-sysreg"; reg = <0x010000 0x1000>; gpio-controller; #gpio-cells = <2>; }; - v2m_sysctl: sysctl@020000 { + v2m_sysctl: sysctl@20000 { compatible = "arm,sp810", "arm,primecell"; reg = <0x020000 0x1000>; clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>; @@ -78,7 +78,7 @@ assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>; }; - aaci@040000 { + aaci@40000 { compatible = "arm,pl041", "arm,primecell"; reg = <0x040000 0x1000>; interrupts = <11>; @@ -86,7 +86,7 @@ clock-names = "apb_pclk"; }; - mmci@050000 { + mmci@50000 { compatible = "arm,pl180", "arm,primecell"; reg = <0x050000 0x1000>; interrupts = <9 10>; @@ -98,7 +98,7 @@ clock-names = "mclk", "apb_pclk"; }; - kmi@060000 { + kmi@60000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x060000 0x1000>; interrupts = <12>; @@ -106,7 +106,7 @@ clock-names = "KMIREFCLK", "apb_pclk"; }; - kmi@070000 { + kmi@70000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x070000 0x1000>; interrupts = <13>; @@ -114,7 +114,7 @@ clock-names = "KMIREFCLK", "apb_pclk"; }; - v2m_serial0: uart@090000 { + v2m_serial0: uart@90000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x090000 0x1000>; interrupts = <5>; @@ -122,7 +122,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial1: uart@0a0000 { + v2m_serial1: uart@a0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0a0000 0x1000>; interrupts = <6>; @@ -130,7 +130,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial2: uart@0b0000 { + v2m_serial2: uart@b0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0b0000 0x1000>; interrupts = <7>; @@ -138,7 +138,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial3: uart@0c0000 { + v2m_serial3: uart@c0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0c0000 0x1000>; interrupts = <8>; @@ -146,7 +146,7 @@ clock-names = "uartclk", "apb_pclk"; }; - wdt@0f0000 { + wdt@f0000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0f0000 0x1000>; interrupts = <0>; @@ -219,7 +219,7 @@ }; }; - virtio-block@0130000 { + virtio-block@130000 { compatible = "virtio,mmio"; reg = <0x130000 0x200>; interrupts = <42>; diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts index e3a171162bb4..124dceeada1f 100644 --- a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts +++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts @@ -128,7 +128,7 @@ }; }; - smb@08000000 { + smb@8000000 { compatible = "simple-bus"; #address-cells = <2>; diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts index ab4ae1a32fab..f00c21e0767e 100644 --- a/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts @@ -114,7 +114,7 @@ reg = <0x04000000 0x06400000>; /* 100MB */ }; - partition@0a400000{ + partition@a400000{ label = "ncustfs"; reg = <0x0a400000 0x35c00000>; /* 860MB */ }; diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi index 35c8457e3d1f..4a2a6af8e752 100644 --- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi @@ -77,7 +77,7 @@ next-level-cache = <&CLUSTER0_L2>; }; - CLUSTER0_L2: l2-cache@000 { + CLUSTER0_L2: l2-cache@0 { compatible = "cache"; }; }; @@ -367,7 +367,7 @@ #size-cells = <1>; ranges = <0 0x652e0000 0x80000>; - v2m0: v2m@00000 { + v2m0: v2m@0 { compatible = "arm,gic-v2m-frame"; interrupt-parent = <&gic>; msi-controller; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi index cbc43376e25e..3a4d4524b5ed 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi @@ -46,7 +46,7 @@ clock-mult = <1>; }; - genpll0: genpll0@0001d104 { + genpll0: genpll0@1d104 { #clock-cells = <1>; compatible = "brcm,sr-genpll0"; reg = <0x0001d104 0x32>, @@ -58,7 +58,7 @@ "clk_paxc_axi"; }; - genpll3: genpll3@0001d1e0 { + genpll3: genpll3@1d1e0 { #clock-cells = <1>; compatible = "brcm,sr-genpll3"; reg = <0x0001d1e0 0x32>, @@ -68,7 +68,7 @@ "clk_sdio"; }; - genpll4: genpll4@0001d214 { + genpll4: genpll4@1d214 { #clock-cells = <1>; compatible = "brcm,sr-genpll4"; reg = <0x0001d214 0x32>, @@ -80,7 +80,7 @@ "clk_bridge_fscpu"; }; - genpll5: genpll5@0001d248 { + genpll5: genpll5@1d248 { #clock-cells = <1>; compatible = "brcm,sr-genpll5"; reg = <0x0001d248 0x32>, @@ -90,7 +90,7 @@ "crypto_ae_clk", "raid_ae_clk"; }; - lcpll0: lcpll0@0001d0c4 { + lcpll0: lcpll0@1d0c4 { #clock-cells = <1>; compatible = "brcm,sr-lcpll0"; reg = <0x0001d0c4 0x3c>, @@ -101,7 +101,7 @@ "clk_sata_500"; }; - lcpll1: lcpll1@0001d138 { + lcpll1: lcpll1@1d138 { #clock-cells = <1>; compatible = "brcm,sr-lcpll1"; reg = <0x0001d138 0x3c>, diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi index 8bf1dc6b46ca..9666969c8c88 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi @@ -36,7 +36,7 @@ #size-cells = <1>; ranges = <0x0 0x0 0x67000000 0x00800000>; - crypto_mbox: crypto_mbox@00000000 { + crypto_mbox: crypto_mbox@0 { compatible = "brcm,iproc-flexrm-mbox"; reg = <0x00000000 0x200000>; msi-parent = <&gic_its 0x4100>; @@ -44,7 +44,7 @@ dma-coherent; }; - raid_mbox: raid_mbox@00400000 { + raid_mbox: raid_mbox@400000 { compatible = "brcm,iproc-flexrm-mbox"; reg = <0x00400000 0x200000>; dma-coherent; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi index 15214d05fec1..8a3a770e8f2c 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi @@ -32,7 +32,7 @@ #include <dt-bindings/pinctrl/brcm,pinctrl-stingray.h> - pinconf: pinconf@00140000 { + pinconf: pinconf@140000 { compatible = "pinconf-single"; reg = <0x00140000 0x250>; pinctrl-single,register-width = <32>; @@ -40,7 +40,7 @@ /* pinconf functions */ }; - pinmux: pinmux@0014029c { + pinmux: pinmux@14029c { compatible = "pinctrl-single"; reg = <0x0014029c 0x250>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi index a774709388df..4b5465da81d8 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi @@ -36,7 +36,7 @@ #size-cells = <1>; ranges = <0x0 0x0 0x67d00000 0x00800000>; - sata0: ahci@00210000 { + sata0: ahci@210000 { compatible = "brcm,iproc-ahci", "generic-ahci"; reg = <0x00210000 0x1000>; reg-names = "ahci"; @@ -52,7 +52,7 @@ }; }; - sata_phy0: sata_phy@00212100 { + sata_phy0: sata_phy@212100 { compatible = "brcm,iproc-sr-sata-phy"; reg = <0x00212100 0x1000>; reg-names = "phy"; @@ -66,7 +66,7 @@ }; }; - sata1: ahci@00310000 { + sata1: ahci@310000 { compatible = "brcm,iproc-ahci", "generic-ahci"; reg = <0x00310000 0x1000>; reg-names = "ahci"; @@ -82,7 +82,7 @@ }; }; - sata_phy1: sata_phy@00312100 { + sata_phy1: sata_phy@312100 { compatible = "brcm,iproc-sr-sata-phy"; reg = <0x00312100 0x1000>; reg-names = "phy"; @@ -96,7 +96,7 @@ }; }; - sata2: ahci@00120000 { + sata2: ahci@120000 { compatible = "brcm,iproc-ahci", "generic-ahci"; reg = <0x00120000 0x1000>; reg-names = "ahci"; @@ -112,7 +112,7 @@ }; }; - sata_phy2: sata_phy@00122100 { + sata_phy2: sata_phy@122100 { compatible = "brcm,iproc-sr-sata-phy"; reg = <0x00122100 0x1000>; reg-names = "phy"; @@ -126,7 +126,7 @@ }; }; - sata3: ahci@00130000 { + sata3: ahci@130000 { compatible = "brcm,iproc-ahci", "generic-ahci"; reg = <0x00130000 0x1000>; reg-names = "ahci"; @@ -142,7 +142,7 @@ }; }; - sata_phy3: sata_phy@00132100 { + sata_phy3: sata_phy@132100 { compatible = "brcm,iproc-sr-sata-phy"; reg = <0x00132100 0x1000>; reg-names = "phy"; @@ -156,7 +156,7 @@ }; }; - sata4: ahci@00330000 { + sata4: ahci@330000 { compatible = "brcm,iproc-ahci", "generic-ahci"; reg = <0x00330000 0x1000>; reg-names = "ahci"; @@ -172,7 +172,7 @@ }; }; - sata_phy4: sata_phy@00332100 { + sata_phy4: sata_phy@332100 { compatible = "brcm,iproc-sr-sata-phy"; reg = <0x00332100 0x1000>; reg-names = "phy"; @@ -186,7 +186,7 @@ }; }; - sata5: ahci@00400000 { + sata5: ahci@400000 { compatible = "brcm,iproc-ahci", "generic-ahci"; reg = <0x00400000 0x1000>; reg-names = "ahci"; @@ -202,7 +202,7 @@ }; }; - sata_phy5: sata_phy@00402100 { + sata_phy5: sata_phy@402100 { compatible = "brcm,iproc-sr-sata-phy"; reg = <0x00402100 0x1000>; reg-names = "phy"; @@ -216,7 +216,7 @@ }; }; - sata6: ahci@00410000 { + sata6: ahci@410000 { compatible = "brcm,iproc-ahci", "generic-ahci"; reg = <0x00410000 0x1000>; reg-names = "ahci"; @@ -232,7 +232,7 @@ }; }; - sata_phy6: sata_phy@00412100 { + sata_phy6: sata_phy@412100 { compatible = "brcm,iproc-sr-sata-phy"; reg = <0x00412100 0x1000>; reg-names = "phy"; @@ -246,7 +246,7 @@ }; }; - sata7: ahci@00420000 { + sata7: ahci@420000 { compatible = "brcm,iproc-ahci", "generic-ahci"; reg = <0x00420000 0x1000>; reg-names = "ahci"; @@ -262,7 +262,7 @@ }; }; - sata_phy7: sata_phy@00422100 { + sata_phy7: sata_phy@422100 { compatible = "brcm,iproc-sr-sata-phy"; reg = <0x00422100 0x1000>; reg-names = "phy"; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi index e6f75c633623..99aaff0b6d72 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -42,7 +42,7 @@ #address-cells = <2>; #size-cells = <0>; - cpu@000 { + cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x0 0x0>; @@ -50,7 +50,7 @@ next-level-cache = <&CLUSTER0_L2>; }; - cpu@001 { + cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x0 0x1>; @@ -106,7 +106,7 @@ next-level-cache = <&CLUSTER3_L2>; }; - CLUSTER0_L2: l2-cache@000 { + CLUSTER0_L2: l2-cache@0 { compatible = "cache"; }; @@ -152,13 +152,13 @@ #size-cells = <1>; ranges = <0x0 0x0 0x61000000 0x05000000>; - ccn: ccn@00000000 { + ccn: ccn@0 { compatible = "arm,ccn-502"; reg = <0x00000000 0x900000>; interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>; }; - gic: interrupt-controller@02c00000 { + gic: interrupt-controller@2c00000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; #address-cells = <1>; @@ -177,7 +177,7 @@ }; }; - smmu: mmu@03000000 { + smmu: mmu@3000000 { compatible = "arm,mmu-500"; reg = <0x03000000 0x80000>; #global-interrupts = <1>; @@ -258,7 +258,7 @@ #include "stingray-clock.dtsi" - gpio_crmu: gpio@00024800 { + gpio_crmu: gpio@24800 { compatible = "brcm,iproc-gpio"; reg = <0x00024800 0x4c>; ngpios = <6>; @@ -278,7 +278,7 @@ #include "stingray-pinctrl.dtsi" - mdio_mux_iproc: mdio-mux@0002023c { + mdio_mux_iproc: mdio-mux@2023c { compatible = "brcm,mdio-mux-iproc"; reg = <0x0002023c 0x14>; #address-cells = <1>; @@ -309,7 +309,7 @@ }; }; - pwm: pwm@00010000 { + pwm: pwm@10000 { compatible = "brcm,iproc-pwm"; reg = <0x00010000 0x1000>; clocks = <&crmu_ref25m>; @@ -317,7 +317,7 @@ status = "disabled"; }; - timer0: timer@00030000 { + timer0: timer@30000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x00030000 0x1000>; interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; @@ -328,7 +328,7 @@ status = "disabled"; }; - timer1: timer@00040000 { + timer1: timer@40000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x00040000 0x1000>; interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; @@ -338,7 +338,7 @@ clock-names = "timer1", "timer2", "apb_pclk"; }; - timer2: timer@00050000 { + timer2: timer@50000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x00050000 0x1000>; interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; @@ -349,7 +349,7 @@ status = "disabled"; }; - timer3: timer@00060000 { + timer3: timer@60000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x00060000 0x1000>; interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; @@ -360,7 +360,7 @@ status = "disabled"; }; - timer4: timer@00070000 { + timer4: timer@70000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x00070000 0x1000>; interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; @@ -371,7 +371,7 @@ status = "disabled"; }; - timer5: timer@00080000 { + timer5: timer@80000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x00080000 0x1000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; @@ -382,7 +382,7 @@ status = "disabled"; }; - timer6: timer@00090000 { + timer6: timer@90000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x00090000 0x1000>; interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; @@ -393,7 +393,7 @@ status = "disabled"; }; - timer7: timer@000a0000 { + timer7: timer@a0000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x000a0000 0x1000>; interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>; @@ -404,7 +404,7 @@ status = "disabled"; }; - i2c0: i2c@000b0000 { + i2c0: i2c@b0000 { compatible = "brcm,iproc-i2c"; reg = <0x000b0000 0x100>; #address-cells = <1>; @@ -414,7 +414,7 @@ status = "disabled"; }; - wdt0: watchdog@000c0000 { + wdt0: watchdog@c0000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x000c0000 0x1000>; interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; @@ -422,7 +422,7 @@ clock-names = "wdogclk", "apb_pclk"; }; - gpio_hsls: gpio@000d0000 { + gpio_hsls: gpio@d0000 { compatible = "brcm,iproc-gpio"; reg = <0x000d0000 0x864>; ngpios = <151>; @@ -448,7 +448,7 @@ <&pinmux 151 91 4>; }; - i2c1: i2c@000e0000 { + i2c1: i2c@e0000 { compatible = "brcm,iproc-i2c"; reg = <0x000e0000 0x100>; #address-cells = <1>; @@ -458,7 +458,7 @@ status = "disabled"; }; - uart0: uart@00100000 { + uart0: uart@100000 { device_type = "serial"; compatible = "snps,dw-apb-uart"; reg = <0x00100000 0x1000>; @@ -469,7 +469,7 @@ status = "disabled"; }; - uart1: uart@00110000 { + uart1: uart@110000 { device_type = "serial"; compatible = "snps,dw-apb-uart"; reg = <0x00110000 0x1000>; @@ -480,7 +480,7 @@ status = "disabled"; }; - uart2: uart@00120000 { + uart2: uart@120000 { device_type = "serial"; compatible = "snps,dw-apb-uart"; reg = <0x00120000 0x1000>; @@ -491,7 +491,7 @@ status = "disabled"; }; - uart3: uart@00130000 { + uart3: uart@130000 { device_type = "serial"; compatible = "snps,dw-apb-uart"; reg = <0x00130000 0x1000>; @@ -502,7 +502,7 @@ status = "disabled"; }; - ssp0: ssp@00180000 { + ssp0: ssp@180000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x00180000 0x1000>; interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; @@ -514,7 +514,7 @@ status = "disabled"; }; - ssp1: ssp@00190000 { + ssp1: ssp@190000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x00190000 0x1000>; interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; @@ -526,12 +526,12 @@ status = "disabled"; }; - hwrng: hwrng@00220000 { + hwrng: hwrng@220000 { compatible = "brcm,iproc-rng200"; reg = <0x00220000 0x28>; }; - dma0: dma@00310000 { + dma0: dma@310000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x00310000 0x1000>; interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, @@ -551,7 +551,7 @@ iommus = <&smmu 0x6000 0x0000>; }; - enet: ethernet@00340000{ + enet: ethernet@340000{ compatible = "brcm,amac"; reg = <0x00340000 0x1000>; reg-names = "amac_base"; @@ -560,7 +560,7 @@ status= "disabled"; }; - nand: nand@00360000 { + nand: nand@360000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x00360000 0x600>, <0x0050a408 0x600>, @@ -573,7 +573,7 @@ status = "disabled"; }; - sdio0: sdhci@003f1000 { + sdio0: sdhci@3f1000 { compatible = "brcm,sdhci-iproc"; reg = <0x003f1000 0x100>; interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>; @@ -583,7 +583,7 @@ status = "disabled"; }; - sdio1: sdhci@003f2000 { + sdio1: sdhci@3f2000 { compatible = "brcm,sdhci-iproc"; reg = <0x003f2000 0x100>; interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/cavium/thunder-88xx.dts b/arch/arm64/boot/dts/cavium/thunder-88xx.dts index 800ba65991f7..5ec2bfa5f714 100644 --- a/arch/arm64/boot/dts/cavium/thunder-88xx.dts +++ b/arch/arm64/boot/dts/cavium/thunder-88xx.dts @@ -60,7 +60,7 @@ serial1 = &uaa1; }; - memory@00000000 { + memory@0 { device_type = "memory"; reg = <0x0 0x00000000 0x0 0x80000000>; }; diff --git a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi index 04dc8a8d1539..1a9103b269cb 100644 --- a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi +++ b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi @@ -62,97 +62,97 @@ #address-cells = <2>; #size-cells = <0>; - cpu@000 { + cpu@0 { device_type = "cpu"; compatible = "cavium,thunder", "arm,armv8"; reg = <0x0 0x000>; enable-method = "psci"; }; - cpu@001 { + cpu@1 { device_type = "cpu"; compatible = "cavium,thunder", "arm,armv8"; reg = <0x0 0x001>; enable-method = "psci"; }; - cpu@002 { + cpu@2 { device_type = "cpu"; compatible = "cavium,thunder", "arm,armv8"; reg = <0x0 0x002>; enable-method = "psci"; }; - cpu@003 { + cpu@3 { device_type = "cpu"; compatible = "cavium,thunder", "arm,armv8"; reg = <0x0 0x003>; enable-method = "psci"; }; - cpu@004 { + cpu@4 { device_type = "cpu"; compatible = "cavium,thunder", "arm,armv8"; reg = <0x0 0x004>; enable-method = "psci"; }; - cpu@005 { + cpu@5 { device_type = "cpu"; compatible = "cavium,thunder", "arm,armv8"; reg = <0x0 0x005>; enable-method = "psci"; }; - cpu@006 { + cpu@6 { device_type = "cpu"; compatible = "cavium,thunder", "arm,armv8"; reg = <0x0 0x006>; enable-method = "psci"; }; - cpu@007 { + cpu@7 { device_type = "cpu"; compatible = "cavium,thunder", "arm,armv8"; reg = <0x0 0x007>; enable-method = "psci"; }; - cpu@008 { + cpu@8 { device_type = "cpu"; compatible = "cavium,thunder", "arm,armv8"; reg = <0x0 0x008>; enable-method = "psci"; }; - cpu@009 { + cpu@9 { device_type = "cpu"; compatible = "cavium,thunder", "arm,armv8"; reg = <0x0 0x009>; enable-method = "psci"; }; - cpu@00a { + cpu@a { device_type = "cpu"; compatible = "cavium,thunder", "arm,armv8"; reg = <0x0 0x00a>; enable-method = "psci"; }; - cpu@00b { + cpu@b { device_type = "cpu"; compatible = "cavium,thunder", "arm,armv8"; reg = <0x0 0x00b>; enable-method = "psci"; }; - cpu@00c { + cpu@c { device_type = "cpu"; compatible = "cavium,thunder", "arm,armv8"; reg = <0x0 0x00c>; enable-method = "psci"; }; - cpu@00d { + cpu@d { device_type = "cpu"; compatible = "cavium,thunder", "arm,armv8"; reg = <0x0 0x00d>; enable-method = "psci"; }; - cpu@00e { + cpu@e { device_type = "cpu"; compatible = "cavium,thunder", "arm,armv8"; reg = <0x0 0x00e>; enable-method = "psci"; }; - cpu@00f { + cpu@f { device_type = "cpu"; compatible = "cavium,thunder", "arm,armv8"; reg = <0x0 0x00f>; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts index fd4705c451e2..21e7618b8e97 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts @@ -196,6 +196,325 @@ }; }; +/* + * Legend: proper name = the GPIO line is used as GPIO + * NC = not connected (pin out but not routed from the chip to + * anything the board) + * "[PER]" = pin is muxed for [peripheral] (not GPIO) + * "" = no idea, schematic doesn't say, could be + * unrouted (not connected to any external pin) + * LSEC = Low Speed External Connector + * HSEC = High Speed External Connector + * + * Line names are taken from "HiKey 960 Board ver A" schematics + * from Huawei. The 40 pin low speed expansion connector is named + * J2002 63453-140LF. + * + * For the lines routed to the external connectors the + * lines are named after the 96Boards CE Specification 1.0, + * Appendix "Expansion Connector Signal Description". + * + * When the 96Board naming of a line and the schematic name of + * the same line are in conflict, the 96Board specification + * takes precedence, which means that the external UART on the + * LSEC is named UART0 while the schematic and SoC names this + * UART3. This is only for the informational lines i.e. "[FOO]", + * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only + * ones actually used for GPIO. + */ +&gpio0 { + /* GPIO_000-GPIO_007 */ + gpio-line-names = + "", + "TP901", /* TEST_MODE connected to TP901 */ + "[PMU0_SSI]", + "[PMU1_SSI]", + "[PMU2_SSI]", + "[PMU0_CLKOUT]", + "[JTAG_TCK]", + "[JTAG_TMS]"; +}; + +&gpio1 { + /* GPIO_008-GPIO_015 */ + gpio-line-names = + "[JTAG_TRST_N]", + "[JTAG_TDI]", + "[JTAG_TDO]", + "NC", "NC", + "[I2C3_SCL]", + "[I2C3_SDA]", + "NC"; +}; + +&gpio2 { + /* GPIO_016-GPIO_023 */ + gpio-line-names = + "NC", "NC", "NC", + "GPIO-J", /* LSEC pin 32: GPIO_019 */ + "GPIO_020_HDMI_SEL", + "GPIO-L", /* LSEC pin 34: GPIO_021 */ + "GPIO_022_UFSBUCK_INT_N", + "GPIO-G"; /* LSEC pin 29: LCD_TE0 */ +}; + +&gpio3 { + /* GPIO_024-GPIO_031 */ + /* The rail from pin BK36 is named LCD_TE0, we assume to be muxed as GPIO for GPIO-G */ + gpio-line-names = + "[CSI0_MCLK]", /* HSEC pin 15: ISP_CCLK0_MCAM */ + "[CSI1_MCLK]", /* HSEC pin 17: ISP_CCLK1_SCAM */ + "NC", + "[I2C2_SCL]", /* HSEC pin 32: ISP_SCL0 */ + "[I2C2_SDA]", /* HSEC pin 34: ISP_SDA0 */ + "[I2C3_SCL]", /* HSEC pin 36: ISP_SCL1 */ + "[I2C3_SDA]", /* HSEC pin 38: ISP_SDA1 */ + "NC"; +}; + +&gpio4 { + /* GPIO_032-GPIO_039 */ + gpio-line-names = + "NC", "NC", + "PWR_BTN_N", /* LSEC pin 4: GPIO_034_PWRON_DET */ + "GPIO_035_PMU2_EN", + "GPIO_036_USB_HUB_RESET", + "NC", "NC", "NC"; +}; + +&gpio5 { + /* GPIO_040-GPIO_047 */ + gpio-line-names = + "GPIO-H", /* LSEC pin 30: GPIO_040_LCD_RST_N */ + "GPIO_041_HDMI_PD", + "TP904", /* Test point */ + "TP905", /* Test point */ + "NC", "NC", + "GPIO_046_HUB_VDD33_EN", + "GPIO_047_PMU1_EN"; +}; + +&gpio6 { + /* GPIO_048-GPIO_055 */ + gpio-line-names = + "NC", "NC", "NC", + "GPIO_051_WIFI_EN", + "GPIO-I", /* LSEC pin 31: GPIO_052_CAM0_RST_N */ + /* + * These two pins should be used for SD(IO) data according to the + * 96boards specification but seems to be repurposed for a IRDA UART. + * They are however named according to the spec. + */ + "[SD_DAT1]", /* HSEC pin 3: UART0_IRDA_RXD */ + "[SD_DAT2]", /* HSEC pin 5: UART0_IRDA_TXD */ + "[UART1_RXD]"; /* LSEC pin 13: DEBUG_UART6_RXD */ +}; + +&gpio7 { + /* GPIO_056-GPIO_063 */ + gpio-line-names = + "[UART1_TXD]", /* LSEC pin 11: DEBUG_UART6_TXD */ + "[UART0_CTS]", /* LSEC pin 3: UART3_CTS_N */ + "[UART0_RTS]", /* LSEC pin 9: UART3_RTS_N */ + "[UART0_RXD]", /* LSEC pin 7: UART3_RXD */ + "[UART0_TXD]", /* LSEC pin 5: UART3_TXD */ + "[SOC_BT_UART4_CTS_N]", + "[SOC_BT_UART4_RTS_N]", + "[SOC_BT_UART4_RXD]"; +}; + +&gpio8 { + /* GPIO_064-GPIO_071 */ + gpio-line-names = + "[SOC_BT_UART4_TXD]", + "NC", + "[PMU_HKADC_SSI]", + "NC", + "GPIO_068_SEL", + "NC", "NC", "NC"; + +}; + +&gpio9 { + /* GPIO_072-GPIO_079 */ + gpio-line-names = + "NC", "NC", "NC", + "GPIO-K", /* LSEC pin 33: GPIO_075_CAM1_RST_N */ + "NC", "NC", "NC", "NC"; +}; + +&gpio10 { + /* GPIO_080-GPIO_087 */ + gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC"; +}; + +&gpio11 { + /* GPIO_088-GPIO_095 */ + gpio-line-names = + "NC", + "[PCIE_PERST_N]", + "NC", "NC", "NC", "NC", "NC", "NC"; +}; + +&gpio12 { + /* GPIO_096-GPIO_103 */ + gpio-line-names = "NC", "NC", "NC", "", "", "", "", "NC"; +}; + +&gpio13 { + /* GPIO_104-GPIO_111 */ + gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC"; +}; + +&gpio14 { + /* GPIO_112-GPIO_119 */ + gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC"; +}; + +&gpio15 { + /* GPIO_120-GPIO_127 */ + gpio-line-names = + "NC", "NC", "NC", "NC", "NC", "NC", + "GPIO_126_BT_EN", + "TP902"; /* GPIO_127_JTAG_SEL0 */ +}; + +&gpio16 { + /* GPIO_128-GPIO_135 */ + gpio-line-names = "", "", "", "", "", "", "", ""; +}; + +&gpio17 { + /* GPIO_136-GPIO_143 */ + gpio-line-names = "", "", "", "", "", "", "", ""; +}; + +&gpio18 { + /* GPIO_144-GPIO_151 */ + gpio-line-names = + "[UFS_REF_CLK]", + "[UFS_RST_N]", + "[SPI1_SCLK]", /* HSEC pin 9: GPIO_146_SPI3_CLK */ + "[SPI1_DIN]", /* HSEC pin 11: GPIO_147_SPI3_DI */ + "[SPI1_DOUT]", /* HSEC pin 1: GPIO_148_SPI3_DO */ + "[SPI1_CS]", /* HSEC pin 7: GPIO_149_SPI3_CS0_N */ + "GPIO_150_USER_LED1", + "GPIO_151_USER_LED2"; +}; + +&gpio19 { + /* GPIO_152-GPIO_159 */ + gpio-line-names = "NC", "NC", "NC", "NC", "", "", "", ""; +}; + +&gpio20 { + /* GPIO_160-GPIO_167 */ + gpio-line-names = + "[SD_CLK]", + "[SD_CMD]", + "[SD_DATA0]", + "[SD_DATA1]", + "[SD_DATA2]", + "[SD_DATA3]", + "", ""; +}; + +&gpio21 { + /* GPIO_168-GPIO_175 */ + gpio-line-names = + "[WL_SDIO_CLK]", + "[WL_SDIO_CMD]", + "[WL_SDIO_DATA0]", + "[WL_SDIO_DATA1]", + "[WL_SDIO_DATA2]", + "[WL_SDIO_DATA3]", + "", ""; +}; + +&gpio22 { + /* GPIO_176-GPIO_183 */ + gpio-line-names = + "[GPIO_176_PMU_PWR_HOLD]", + "NA", + "[SYSCLK_EN]", + "GPIO_179_WL_WAKEUP_AP", + "GPIO_180_HDMI_INT", + "NA", + "GPIO-F", /* LSEC pin 28: LCD_BL_PWM */ + "[I2C0_SCL]"; /* LSEC pin 15 */ +}; + +&gpio23 { + /* GPIO_184-GPIO_191 */ + gpio-line-names = + "[I2C0_SDA]", /* LSEC pin 17 */ + "[I2C1_SCL]", /* Actual SoC I2C1 */ + "[I2C1_SDA]", /* Actual SoC I2C1 */ + "[I2C1_SCL]", /* LSEC pin 19: I2C7_SCL */ + "[I2C1_SDA]", /* LSEC pin 21: I2C7_SDA */ + "GPIO_189_USER_LED3", + "GPIO_190_USER_LED4", + ""; +}; + +&gpio24 { + /* GPIO_192-GPIO_199 */ + gpio-line-names = + "[PCM_DI]", /* LSEC pin 22: GPIO_192_I2S0_DI */ + "[PCM_DO]", /* LSEC pin 20: GPIO_193_I2S0_DO */ + "[PCM_CLK]", /* LSEC pin 18: GPIO_194_I2S0_XCLK */ + "[PCM_FS]", /* LSEC pin 16: GPIO_195_I2S0_XFS */ + "[GPIO_196_I2S2_DI]", + "[GPIO_197_I2S2_DO]", + "[GPIO_198_I2S2_XCLK]", + "[GPIO_199_I2S2_XFS]"; +}; + +&gpio25 { + /* GPIO_200-GPIO_207 */ + gpio-line-names = + "NC", + "NC", + "GPIO_202_VBUS_TYPEC", + "GPIO_203_SD_DET", + "GPIO_204_PMU12_IRQ_N", + "GPIO_205_WIFI_ACTIVE", + "GPIO_206_USBSW_SEL", + "GPIO_207_BT_ACTIVE"; +}; + +&gpio26 { + /* GPIO_208-GPIO_215 */ + gpio-line-names = + "GPIO-A", /* LSEC pin 23: GPIO_208 */ + "GPIO-B", /* LSEC pin 24: GPIO_209 */ + "GPIO-C", /* LSEC pin 25: GPIO_210 */ + "GPIO-D", /* LSEC pin 26: GPIO_211 */ + "GPIO-E", /* LSEC pin 27: GPIO_212 */ + "[PCIE_CLKREQ_N]", + "[PCIE_WAKE_N]", + "[SPI0_CLK]"; /* LSEC pin 8: SPI2_CLK */ +}; + +&gpio27 { + /* GPIO_216-GPIO_223 */ + gpio-line-names = + "[SPI0_DIN]", /* LSEC pin 10: SPI2_DI */ + "[SPI0_DOUT]", /* LSEC pin 14: SPI2_DO */ + "[SPI0_CS]", /* LSEC pin 12: SPI2_CS0_N */ + "GPIO_219_CC_INT", + "NC", + "NC", + "[PMU_INT]", + ""; +}; + +&gpio28 { + /* GPIO_224-GPIO_231 */ + gpio-line-names = + "", "", "", "", "", "", "", ""; +}; + &i2c0 { /* On Low speed expansion */ label = "LS-I2C0"; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index b7a90d632959..42e9a6dbd970 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -978,5 +978,12 @@ clocks = <&crg_ctrl HI3660_OSC32K>; clock-names = "apb_pclk"; }; + + tsensor: tsensor@fff30000 { + compatible = "hisilicon,hi3660-tsensor"; + reg = <0x0 0xfff30000 0x0 0x1000>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + #thermal-sensor-cells = <1>; + }; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts index b9142871d6fe..a6fd13389f8d 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts @@ -78,17 +78,17 @@ &gpio1 { status = "okay"; - gpio-line-names = "LS-GPIO-E", "", + gpio-line-names = "GPIO-E", "", "", "", - "", "LS-GPIO-F", - "", "LS-GPIO-J"; + "", "GPIO-F", + "", "GPIO-J"; }; &gpio2 { status = "okay"; - gpio-line-names = "LS-GPIO-H", "LS-GPIO-I", - "LS-GPIO-L", "LS-GPIO-G", - "LS-GPIO-K", "", + gpio-line-names = "GPIO-H", "GPIO-I", + "GPIO-L", "GPIO-G", + "GPIO-K", "", "", ""; }; @@ -96,15 +96,15 @@ status = "okay"; gpio-line-names = "", "", "", "", - "LS-GPIO-C", "", - "", "LS-GPIO-B"; + "GPIO-C", "", + "", "GPIO-B"; }; &gpio4 { status = "okay"; gpio-line-names = "", "", "", "", - "", "LS-GPIO-D", + "", "GPIO-D", "", ""; }; @@ -112,7 +112,7 @@ status = "okay"; gpio-line-names = "", "USER-LED-1", "USER-LED-2", "", - "", "LS-GPIO-A", + "", "GPIO-A", "", ""; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi new file mode 100644 index 000000000000..7afee5d5087b --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi @@ -0,0 +1,381 @@ +/* + * dtsi file for Hisilicon Hi6220 coresight + * + * Copyright (C) 2017 Hisilicon Ltd. + * + * Author: Pengcheng Li <lipengcheng8@huawei.com> + * Leo Yan <leo.yan@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + * + */ + +/ { + soc { + funnel@f6401000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0 0xf6401000 0 0x1000>; + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + soc_funnel_out: endpoint { + remote-endpoint = + <&etf_in>; + }; + }; + + port@1 { + reg = <0>; + soc_funnel_in: endpoint { + slave-mode; + remote-endpoint = + <&acpu_funnel_out>; + }; + }; + }; + }; + + etf@f6402000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0xf6402000 0 0x1000>; + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + etf_in: endpoint { + slave-mode; + remote-endpoint = + <&soc_funnel_out>; + }; + }; + + port@1 { + reg = <0>; + etf_out: endpoint { + remote-endpoint = + <&replicator_in>; + }; + }; + }; + }; + + replicator { + compatible = "arm,coresight-replicator"; + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + replicator_in: endpoint { + slave-mode; + remote-endpoint = + <&etf_out>; + }; + }; + + port@1 { + reg = <0>; + replicator_out0: endpoint { + remote-endpoint = + <&etr_in>; + }; + }; + + port@2 { + reg = <1>; + replicator_out1: endpoint { + remote-endpoint = + <&tpiu_in>; + }; + }; + }; + }; + + etr@f6404000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0xf6404000 0 0x1000>; + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + etr_in: endpoint { + slave-mode; + remote-endpoint = + <&replicator_out0>; + }; + }; + }; + }; + + tpiu@f6405000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0 0xf6405000 0 0x1000>; + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + tpiu_in: endpoint { + slave-mode; + remote-endpoint = + <&replicator_out1>; + }; + }; + }; + }; + + funnel@f6501000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0 0xf6501000 0 0x1000>; + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + acpu_funnel_out: endpoint { + remote-endpoint = + <&soc_funnel_in>; + }; + }; + + port@1 { + reg = <0>; + acpu_funnel_in0: endpoint { + slave-mode; + remote-endpoint = + <&etm0_out>; + }; + }; + + port@2 { + reg = <1>; + acpu_funnel_in1: endpoint { + slave-mode; + remote-endpoint = + <&etm1_out>; + }; + }; + + port@3 { + reg = <2>; + acpu_funnel_in2: endpoint { + slave-mode; + remote-endpoint = + <&etm2_out>; + }; + }; + + port@4 { + reg = <3>; + acpu_funnel_in3: endpoint { + slave-mode; + remote-endpoint = + <&etm3_out>; + }; + }; + + port@5 { + reg = <4>; + acpu_funnel_in4: endpoint { + slave-mode; + remote-endpoint = + <&etm4_out>; + }; + }; + + port@6 { + reg = <5>; + acpu_funnel_in5: endpoint { + slave-mode; + remote-endpoint = + <&etm5_out>; + }; + }; + + port@7 { + reg = <6>; + acpu_funnel_in6: endpoint { + slave-mode; + remote-endpoint = + <&etm6_out>; + }; + }; + + port@8 { + reg = <7>; + acpu_funnel_in7: endpoint { + slave-mode; + remote-endpoint = + <&etm7_out>; + }; + }; + }; + }; + + etm@f659c000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xf659c000 0 0x1000>; + + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + cpu = <&cpu0>; + + port { + etm0_out: endpoint { + remote-endpoint = + <&acpu_funnel_in0>; + }; + }; + }; + + etm@f659d000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xf659d000 0 0x1000>; + + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + cpu = <&cpu1>; + + port { + etm1_out: endpoint { + remote-endpoint = + <&acpu_funnel_in1>; + }; + }; + }; + + etm@f659e000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xf659e000 0 0x1000>; + + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + cpu = <&cpu2>; + + port { + etm2_out: endpoint { + remote-endpoint = + <&acpu_funnel_in2>; + }; + }; + }; + + etm@f659f000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xf659f000 0 0x1000>; + + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + cpu = <&cpu3>; + + port { + etm3_out: endpoint { + remote-endpoint = + <&acpu_funnel_in3>; + }; + }; + }; + + etm@f65dc000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xf65dc000 0 0x1000>; + + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + cpu = <&cpu4>; + + port { + etm4_out: endpoint { + remote-endpoint = + <&acpu_funnel_in4>; + }; + }; + }; + + etm@f65dd000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xf65dd000 0 0x1000>; + + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + cpu = <&cpu5>; + + port { + etm5_out: endpoint { + remote-endpoint = + <&acpu_funnel_in5>; + }; + }; + }; + + etm@f65de000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xf65de000 0 0x1000>; + + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + cpu = <&cpu6>; + + port { + etm6_out: endpoint { + remote-endpoint = + <&acpu_funnel_in6>; + }; + }; + }; + + etm@f65df000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xf65df000 0 0x1000>; + + clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; + clock-names = "apb_pclk"; + + cpu = <&cpu7>; + + port { + etm7_out: endpoint { + remote-endpoint = + <&acpu_funnel_in7>; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 02a3aa4b2165..b3b21d74506d 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -986,3 +986,5 @@ }; }; }; + +#include "hi6220-coresight.dtsi" diff --git a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts index abba750b87f8..3bbd017f088f 100644 --- a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts +++ b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts @@ -18,7 +18,7 @@ model = "Hisilicon Hip05 D02 Development Board"; compatible = "hisilicon,hip05-d02"; - memory@00000000 { + memory@0 { device_type = "memory"; reg = <0x0 0x00000000 0x0 0x80000000>; }; diff --git a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts index 7c4114a67753..9af633021a42 100644 --- a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts +++ b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts @@ -17,7 +17,7 @@ model = "Hisilicon Hip06 D03 Development Board"; compatible = "hisilicon,hip06-d03"; - memory@00000000 { + memory@0 { device_type = "memory"; reg = <0x0 0x00000000 0x0 0x40000000>; }; diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts index 9c3bdf87e543..8f79e8dae102 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts @@ -56,7 +56,7 @@ stdout-path = "serial0:115200n8"; }; - memory@00000000 { + memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts index 0d7b2ae46610..46ec003eabb0 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts @@ -56,7 +56,7 @@ stdout-path = "serial0:115200n8"; }; - memory@00000000 { + memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts index acf5c7d16d79..4fbb13d41451 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts @@ -57,7 +57,7 @@ stdout-path = "serial0:115200n8"; }; - memory@00000000 { + memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; diff --git a/arch/arm64/boot/dts/marvell/armada-8080-db.dts b/arch/arm64/boot/dts/marvell/armada-8080-db.dts index 707af833832b..85b58a19a9fb 100644 --- a/arch/arm64/boot/dts/marvell/armada-8080-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8080-db.dts @@ -55,7 +55,7 @@ stdout-path = "serial0:115200n8"; }; - memory@00000000 { + memory@0 { device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi index 95a1ff60f6c1..b98ea137371d 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi @@ -54,13 +54,13 @@ #address-cells = <1>; #size-cells = <0>; - cpu@000 { + cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x000>; enable-method = "psci"; }; - cpu@001 { + cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x001>; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi index ba43a4357b89..116164ff260f 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi @@ -54,13 +54,13 @@ #address-cells = <1>; #size-cells = <0>; - cpu@000 { + cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x000>; enable-method = "psci"; }; - cpu@001 { + cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x001>; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index 4d360713ed12..30d48ecf46e0 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -254,7 +254,7 @@ ap_syscon: system-controller@6f4000 { compatible = "syscon", "simple-mfd"; - reg = <0x6f4000 0x1000>; + reg = <0x6f4000 0x2000>; ap_clk: clock { compatible = "marvell,ap806-clock"; @@ -265,7 +265,7 @@ compatible = "marvell,ap806-pinctrl"; }; - ap_gpio: gpio { + ap_gpio: gpio@1040 { compatible = "marvell,armada-8k-gpio"; offset = <0x1040>; ngpios = <20>; diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi index bf1b22b70384..7f0661e12f5e 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi @@ -52,13 +52,13 @@ #size-cells = <0>; compatible = "marvell,armada-ap810-octa"; - cpu@000 { + cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x000>; enable-method = "psci"; }; - cpu@001 { + cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0x001>; diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi index d6b800fd26d0..d2f88b92d8e2 100644 --- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi +++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi @@ -167,7 +167,7 @@ ranges = <0 0xe80000 0x10000>; interrupt-parent = <&aic>; - gpio0: gpio@0400 { + gpio0: gpio@400 { compatible = "snps,dw-apb-gpio"; reg = <0x0400 0x400>; #address-cells = <1>; @@ -185,7 +185,7 @@ }; }; - gpio1: gpio@0800 { + gpio1: gpio@800 { compatible = "snps,dw-apb-gpio"; reg = <0x0800 0x400>; #address-cells = <1>; @@ -203,7 +203,7 @@ }; }; - gpio2: gpio@0c00 { + gpio2: gpio@c00 { compatible = "snps,dw-apb-gpio"; reg = <0x0c00 0x400>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 1d63e6b879de..33a3297eb284 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -19,6 +19,30 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/sound/apq8016-lpass.h> +/* + * GPIO name legend: proper name = the GPIO line is used as GPIO + * NC = not connected (pin out but not routed from the chip to + * anything the board) + * "[PER]" = pin is muxed for [peripheral] (not GPIO) + * LSEC = Low Speed External Connector + * HSEC = High Speed External Connector + * + * Line names are taken from the schematic "DragonBoard410c" + * dated monday, august 31, 2015. Page 5 in particular. + * + * For the lines routed to the external connectors the + * lines are named after the 96Boards CE Specification 1.0, + * Appendix "Expansion Connector Signal Description". + * + * When the 96Board naming of a line and the schematic name of + * the same line are in conflict, the 96Board specification + * takes precedence, which means that the external UART on the + * LSEC is named UART0 while the schematic and SoC names this + * UART3. This is only for the informational lines i.e. "[FOO]", + * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only + * ones actually used for GPIO. + */ + / { aliases { serial0 = &blsp1_uart2; @@ -47,6 +71,132 @@ }; soc { + pinctrl@1000000 { + gpio-line-names = + "[UART0_TX]", /* GPIO_0, LSEC pin 5 */ + "[UART0_RX]", /* GPIO_1, LSEC pin 7 */ + "[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */ + "[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */ + "[UART1_TX]", /* GPIO_4, LSEC pin 11 */ + "[UART1_RX]", /* GPIO_5, LSEC pin 13 */ + "[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */ + "[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */ + "[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */ + "[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */ + "[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */ + "[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */ + "GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */ + "GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */ + "[I2C3_SDA]", /* HSEC pin 38 */ + "[I2C3_SCL]", /* HSEC pin 36 */ + "[SPI0_MOSI]", /* LSEC pin 14 */ + "[SPI0_MISO]", /* LSEC pin 10 */ + "[SPI0_CS_N]", /* LSEC pin 12 */ + "[SPI0_CLK]", /* LSEC pin 8 */ + "HDMI_HPD_N", /* GPIO 20 */ + "USR_LED_1_CTRL", + "[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */ + "[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */ + "GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */ + "GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */ + "[CSI0_MCLK]", /* HSEC pin 15 */ + "[CSI1_MCLK]", /* HSEC pin 17 */ + "GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */ + "[I2C2_SDA]", /* HSEC pin 34 */ + "[I2C2_SCL]", /* HSEC pin 32 */ + "DSI2HDMI_INT_N", + "DSI_SW_SEL_APQ", + "GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */ + "GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */ + "GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */ + "GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */ + "FORCED_USB_BOOT", + "SD_CARD_DET_N", + "[WCSS_BT_SSBI]", + "[WCSS_WLAN_DATA_2]", /* GPIO 40 */ + "[WCSS_WLAN_DATA_1]", + "[WCSS_WLAN_DATA_0]", + "[WCSS_WLAN_SET]", + "[WCSS_WLAN_CLK]", + "[WCSS_FM_SSBI]", + "[WCSS_FM_SDI]", + "[WCSS_BT_DAT_CTL]", + "[WCSS_BT_DAT_STB]", + "NC", + "NC", /* GPIO 50 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", /* GPIO 60 */ + "NC", + "NC", + "[CDC_PDM0_CLK]", + "[CDC_PDM0_SYNC]", + "[CDC_PDM0_TX0]", + "[CDC_PDM0_RX0]", + "[CDC_PDM0_RX1]", + "[CDC_PDM0_RX2]", + "GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */ + "NC", /* GPIO 70 */ + "NC", + "NC", + "NC", + "NC", /* GPIO 74 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "BOOT_CONFIG_0", /* GPIO 80 */ + "BOOT_CONFIG_1", + "BOOT_CONFIG_2", + "BOOT_CONFIG_3", + "NC", + "NC", + "BOOT_CONFIG_5", + "NC", + "NC", + "NC", + "NC", /* GPIO 90 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", /* GPIO 100 */ + "NC", + "NC", + "NC", + "SSBI_GPS", + "NC", + "NC", + "KEY_VOLP_N", + "NC", + "NC", + "[LS_EXP_MI2S_WS]", /* GPIO 110 */ + "NC", + "NC", + "[LS_EXP_MI2S_SCK]", + "[LS_EXP_MI2S_DATA0]", + "GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */ + "NC", + "[DSI2HDMI_MI2S_WS]", + "[DSI2HDMI_MI2S_SCK]", + "[DSI2HDMI_MI2S_DATA0]", + "USR_LED_2_CTRL", /* GPIO 120 */ + "SB_HS_ID"; + }; + dma@7884000 { status = "okay"; }; @@ -192,7 +342,7 @@ }; }; - sdhci@07824000 { + sdhci@7824000 { vmmc-supply = <&pm8916_l8>; vqmmc-supply = <&pm8916_l5>; @@ -202,7 +352,7 @@ status = "okay"; }; - sdhci@07864000 { + sdhci@7864000 { vmmc-supply = <&pm8916_l11>; vqmmc-supply = <&pm8916_l12>; @@ -232,7 +382,7 @@ }; }; - lpass@07708000 { + lpass@7708000 { status = "okay"; }; @@ -329,6 +479,25 @@ }; }; + spmi@200f000 { + pm8916@0 { + gpios@c000 { + gpio-line-names = + "USR_LED_3_CTRL", + "USR_LED_4_CTRL", + "USB_HUB_RESET_N_PM", + "USB_SW_SEL_PM"; + }; + mpps@a000 { + gpio-line-names = + "VDD_PX_BIAS", + "WLAN_LED_CTRL", + "BT_LED_CTRL", + "GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */ + }; + }; + }; + wcnss@a21b000 { status = "okay"; }; @@ -379,6 +548,8 @@ status = "okay"; clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; clock-names = "mclk"; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; }; &smd_rpm_regulators { diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index 789f3e87321e..492a011f14f6 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -51,31 +51,31 @@ pinctrl-1 = <&blsp2_uart2_4pins_sleep>; }; - i2c@07577000 { + i2c@7577000 { /* On Low speed expansion */ label = "LS-I2C0"; status = "okay"; }; - i2c@075b6000 { + i2c@75b6000 { /* On Low speed expansion */ label = "LS-I2C1"; status = "okay"; }; - spi@07575000 { + spi@7575000 { /* On Low speed expansion */ label = "LS-SPI0"; status = "okay"; }; - i2c@075b5000 { + i2c@75b5000 { /* On High speed expansion */ label = "HS-I2C2"; status = "okay"; }; - spi@075ba000{ + spi@75ba000{ /* On High speed expansion */ label = "HS-SPI1"; status = "okay"; @@ -138,6 +138,22 @@ pinctrl-names = "default"; pinctrl-0 = <&usb2_vbus_det_gpio>; }; + + agnoc@0 { + qcom,pcie@00600000 { + perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>; + }; + + qcom,pcie@00608000 { + status = "okay"; + perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>; + }; + + qcom,pcie@00610000 { + status = "okay"; + perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>; + }; + }; }; @@ -173,9 +189,15 @@ regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; }; + + /** + * 1.8v required on LS expansion + * for mezzanine boards + */ s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; }; s5 { regulator-min-microvolt = <2150000>; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index dc3817593e14..6b2127a6ced1 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -69,8 +69,11 @@ }; rmtfs@86700000 { + compatible = "qcom,rmtfs-mem"; reg = <0x0 0x86700000 0x0 0xe0000>; no-map; + + qcom,client-id = <1>; }; rfsa@867e00000 { @@ -257,6 +260,8 @@ clocks = <&gcc GCC_CRYPTO_CLK>, <&gcc GCC_CRYPTO_AXI_CLK>, <&gcc GCC_CRYPTO_AHB_CLK>; clock-names = "core", "bus", "iface"; #reset-cells = <1>; + + qcom,dload-mode = <&tcsr 0x6100>; }; }; @@ -495,7 +500,7 @@ status = "disabled"; }; - lpass: lpass@07708000 { + lpass: lpass@7708000 { status = "disabled"; compatible = "qcom,lpass-cpu-apq8016"; clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, @@ -530,7 +535,7 @@ #sound-dai-cells = <1>; }; - sdhc_1: sdhci@07824000 { + sdhc_1: sdhci@7824000 { compatible = "qcom,sdhci-msm-v4"; reg = <0x07824900 0x11c>, <0x07824000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -547,7 +552,7 @@ status = "disabled"; }; - sdhc_2: sdhci@07864000 { + sdhc_2: sdhci@7864000 { compatible = "qcom,sdhci-msm-v4"; reg = <0x07864900 0x11c>, <0x07864000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -814,7 +819,7 @@ mdp: mdp@1a01000 { compatible = "qcom,mdp5"; - reg = <0x1a01000 0x90000>; + reg = <0x1a01000 0x89000>; reg-names = "mdp_phys"; interrupt-parent = <&mdss>; diff --git a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi index 659940434842..c5c42e94f387 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi @@ -300,4 +300,199 @@ drive-strength = <2>; /* 2 MA */ }; }; + + pcie0_clkreq_default: pcie0_clkreq_default { + mux { + pins = "gpio36"; + function = "pci_e0"; + }; + + config { + pins = "gpio36"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie0_perst_default: pcie0_perst_default { + mux { + pins = "gpio35"; + function = "gpio"; + }; + + config { + pins = "gpio35"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + pcie0_wake_default: pcie0_wake_default { + mux { + pins = "gpio37"; + function = "gpio"; + }; + + config { + pins = "gpio37"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie0_clkreq_sleep: pcie0_clkreq_sleep { + mux { + pins = "gpio36"; + function = "gpio"; + }; + + config { + pins = "gpio36"; + drive-strength = <2>; + bias-disable; + }; + }; + + pcie0_wake_sleep: pcie0_wake_sleep { + mux { + pins = "gpio37"; + function = "gpio"; + }; + + config { + pins = "gpio37"; + drive-strength = <2>; + bias-disable; + }; + }; + + pcie1_clkreq_default: pcie1_clkreq_default { + mux { + pins = "gpio131"; + function = "pci_e1"; + }; + + config { + pins = "gpio131"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_perst_default: pcie1_perst_default { + mux { + pins = "gpio130"; + function = "gpio"; + }; + + config { + pins = "gpio130"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + pcie1_wake_default: pcie1_wake_default { + mux { + pins = "gpio132"; + function = "gpio"; + }; + + config { + pins = "gpio132"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + pcie1_clkreq_sleep: pcie1_clkreq_sleep { + mux { + pins = "gpio131"; + function = "gpio"; + }; + + config { + pins = "gpio131"; + drive-strength = <2>; + bias-disable; + }; + }; + + pcie1_wake_sleep: pcie1_wake_sleep { + mux { + pins = "gpio132"; + function = "gpio"; + }; + + config { + pins = "gpio132"; + drive-strength = <2>; + bias-disable; + }; + }; + + pcie2_clkreq_default: pcie2_clkreq_default { + mux { + pins = "gpio115"; + function = "pci_e2"; + }; + + config { + pins = "gpio115"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie2_perst_default: pcie2_perst_default { + mux { + pins = "gpio114"; + function = "gpio"; + }; + + config { + pins = "gpio114"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + pcie2_wake_default: pcie2_wake_default { + mux { + pins = "gpio116"; + function = "gpio"; + }; + + config { + pins = "gpio116"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + pcie2_clkreq_sleep: pcie2_clkreq_sleep { + mux { + pins = "gpio115"; + function = "gpio"; + }; + + config { + pins = "gpio115"; + drive-strength = <2>; + bias-disable; + }; + }; + + pcie2_wake_sleep: pcie2_wake_sleep { + mux { + pins = "gpio116"; + function = "gpio"; + }; + + config { + pins = "gpio116"; + drive-strength = <2>; + bias-disable; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 887b61c872dd..4b2afcc4fdf4 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -13,6 +13,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8996.h> #include <dt-bindings/clock/qcom,mmcc-msm8996.h> +#include <dt-bindings/clock/qcom,rpmcc.h> / { model = "Qualcomm Technologies, Inc. MSM8996"; @@ -261,6 +262,8 @@ firmware { scm { compatible = "qcom,scm-msm8996"; + + qcom,dload-mode = <&tcsr 0x13000>; }; }; @@ -289,6 +292,11 @@ compatible = "qcom,rpm-msm8996"; qcom,glink-channels = "rpm_requests"; + rpmcc: qcom,rpmcc { + compatible = "qcom,rpmcc-msm8996"; + #clock-cells = <1>; + }; + pm8994-regulators { compatible = "qcom,rpm-pm8994-regulators"; @@ -358,6 +366,11 @@ reg = <0x740000 0x20000>; }; + tcsr: syscon@7a0000 { + compatible = "qcom,tcsr-msm8996", "syscon"; + reg = <0x7a0000 0x18000>; + }; + intc: interrupt-controller@9bc0000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; @@ -395,7 +408,7 @@ #clock-cells = <1>; }; - blsp1_spi0: spi@07575000 { + blsp1_spi0: spi@7575000 { compatible = "qcom,spi-qup-v2.2.1"; reg = <0x07575000 0x600>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; @@ -410,7 +423,7 @@ status = "disabled"; }; - blsp2_i2c0: i2c@075b5000 { + blsp2_i2c0: i2c@75b5000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x075b5000 0x1000>; interrupts = <GIC_SPI 101 0>; @@ -441,7 +454,7 @@ status = "disabled"; }; - blsp2_i2c1: i2c@075b6000 { + blsp2_i2c1: i2c@75b6000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x075b6000 0x1000>; interrupts = <GIC_SPI 102 0>; @@ -466,7 +479,7 @@ status = "disabled"; }; - blsp1_i2c2: i2c@07577000 { + blsp1_i2c2: i2c@7577000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x07577000 0x1000>; interrupts = <GIC_SPI 97 0>; @@ -481,7 +494,7 @@ status = "disabled"; }; - blsp2_spi5: spi@075ba000{ + blsp2_spi5: spi@75ba000{ compatible = "qcom,spi-qup-v2.2.1"; reg = <0x075ba000 0x600>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; @@ -522,7 +535,7 @@ #interrupt-cells = <2>; }; - timer@09840000 { + timer@9840000 { #address-cells = <1>; #size-cells = <1>; ranges; @@ -819,6 +832,172 @@ phy-names = "usb2-phy", "usb3-phy"; }; }; + + agnoc@0 { + power-domains = <&gcc AGGRE0_NOC_GDSC>; + compatible = "simple-pm-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pcie0: qcom,pcie@00600000 { + compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; + status = "disabled"; + power-domains = <&gcc PCIE0_GDSC>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + reg = <0x00600000 0x2000>, + <0x0c000000 0xf1d>, + <0x0c000f20 0xa8>, + <0x0c100000 0x100000>; + reg-names = "parf", "dbi", "elbi","config"; + + phys = <&pciephy_0>; + phy-names = "pciephy"; + + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>, + <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>; + + interrupts = <GIC_SPI 405 IRQ_TYPE_NONE>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pcie0_clkreq_default &pcie0_perst_default &pcie0_wake_default>; + pinctrl-1 = <&pcie0_clkreq_sleep &pcie0_perst_default &pcie0_wake_sleep>; + + + vdda-supply = <&pm8994_l28>; + + linux,pci-domain = <0>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>; + + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave"; + + }; + + pcie1: qcom,pcie@00608000 { + compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; + power-domains = <&gcc PCIE1_GDSC>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + status = "disabled"; + + reg = <0x00608000 0x2000>, + <0x0d000000 0xf1d>, + <0x0d000f20 0xa8>, + <0x0d100000 0x100000>; + + reg-names = "parf", "dbi", "elbi","config"; + + phys = <&pciephy_1>; + phy-names = "pciephy"; + + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>, + <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>; + + interrupts = <GIC_SPI 413 IRQ_TYPE_NONE>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pcie1_clkreq_default &pcie1_perst_default &pcie1_wake_default>; + pinctrl-1 = <&pcie1_clkreq_sleep &pcie1_perst_default &pcie1_wake_sleep>; + + + vdda-supply = <&pm8994_l28>; + linux,pci-domain = <1>; + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>; + + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave"; + }; + + pcie2: qcom,pcie@00610000 { + compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; + power-domains = <&gcc PCIE2_GDSC>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + status = "disabled"; + reg = <0x00610000 0x2000>, + <0x0e000000 0xf1d>, + <0x0e000f20 0xa8>, + <0x0e100000 0x100000>; + + reg-names = "parf", "dbi", "elbi","config"; + + phys = <&pciephy_2>; + phy-names = "pciephy"; + + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x0e200000 0x0e200000 0x0 0x100000>, + <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>; + + device_type = "pci"; + + interrupts = <GIC_SPI 421 IRQ_TYPE_NONE>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pcie2_clkreq_default &pcie2_perst_default &pcie2_wake_default>; + pinctrl-1 = <&pcie2_clkreq_sleep &pcie2_perst_default &pcie2_wake_sleep >; + + vdda-supply = <&pm8994_l28>; + + linux,pci-domain = <2>; + clocks = <&gcc GCC_PCIE_2_PIPE_CLK>, + <&gcc GCC_PCIE_2_AUX_CLK>, + <&gcc GCC_PCIE_2_CFG_AHB_CLK>, + <&gcc GCC_PCIE_2_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_2_SLV_AXI_CLK>; + + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave"; + }; + }; }; adsp-pil { diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi index aaa5e67a963e..655dd30639c5 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi @@ -11,7 +11,7 @@ #include "r8a7795.dtsi" &soc { - xhci1: usb@ee0400000 { + xhci1: usb@ee040000 { compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci"; reg = <0 0xee040000 0 0xc00>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index 2938195b9571..d5cfd1a1c539 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -1471,6 +1471,17 @@ status = "disabled"; }; + usb3_peri0: usb@ee020000 { + compatible = "renesas,r8a7795-usb3-peri", + "renesas,rcar-gen3-usb3-peri"; + reg = <0 0xee020000 0 0x400>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 328>; + status = "disabled"; + }; + usb_dmac0: dma-controller@e65a0000 { compatible = "renesas,r8a7795-usb-dmac", "renesas,usb-dmac"; @@ -2014,7 +2025,7 @@ renesas,fcp = <&fcpf1>; }; - hdmi0: hdmi0@fead0000 { + hdmi0: hdmi@fead0000 { compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi"; reg = <0 0xfead0000 0 0x10000>; interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>; @@ -2039,7 +2050,7 @@ }; }; - hdmi1: hdmi1@feae0000 { + hdmi1: hdmi@feae0000 { compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi"; reg = <0 0xfeae0000 0 0x10000>; interrupts = <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index 369092e17e34..57ac5ca6ed98 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -1279,6 +1279,17 @@ status = "disabled"; }; + usb3_peri0: usb@ee020000 { + compatible = "renesas,r8a7796-usb3-peri", + "renesas,rcar-gen3-usb3-peri"; + reg = <0 0xee020000 0 0x400>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 328>; + status = "disabled"; + }; + ohci0: usb@ee080000 { compatible = "generic-ohci"; reg = <0 0xee080000 0 0x100>; @@ -1659,6 +1670,16 @@ /* placeholder */ }; + fdp1@fe940000 { + compatible = "renesas,fdp1"; + reg = <0 0xfe940000 0 0x2400>; + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 119>; + power-domains = <&sysc R8A7796_PD_A3VC>; + resets = <&cpg 119>; + renesas,fcp = <&fcpf0>; + }; + fcpf0: fcp@fe950000 { compatible = "renesas,fcpf"; reg = <0 0xfe950000 0 0x200>; diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi new file mode 100644 index 000000000000..aa9032d34189 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi @@ -0,0 +1,366 @@ +/* + * Device Tree Source for the r8a77970 SoC + * + * Copyright (C) 2016-2017 Renesas Electronics Corp. + * Copyright (C) 2017 Cogent Embedded, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/renesas-cpg-mssr.h> + +/ { + compatible = "renesas,r8a77970"; + #address-cells = <2>; + #size-cells = <2>; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + a53_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0>; + clocks = <&cpg CPG_CORE 0>; + power-domains = <&sysc 5>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + + L2_CA53: cache-controller { + compatible = "cache"; + power-domains = <&sysc 21>; + cache-unified; + cache-level = <2>; + }; + }; + + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + extalr_clk: extalr { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller@f1010000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0xf1010000 0 0x1000>, + <0 0xf1020000 0 0x20000>, + <0 0xf1040000 0 0x20000>, + <0 0xf1060000 0 0x20000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc 32>; + resets = <&cpg 408>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_LOW)>; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a77970-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&extalr_clk>; + clock-names = "extal", "extalr"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a77970-rst"; + reg = <0 0xe6160000 0 0x200>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a77970-sysc"; + reg = <0 0xe6180000 0 0x440>; + #power-domain-cells = <1>; + }; + + prr: chipid@fff00044 { + compatible = "renesas,prr"; + reg = <0 0xfff00044 0 4>; + }; + + dmac1: dma-controller@e7300000 { + compatible = "renesas,dmac-r8a77970", + "renesas,rcar-dmac"; + reg = <0 0xe7300000 0 0x10000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc 32>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <8>; + }; + + dmac2: dma-controller@e7310000 { + compatible = "renesas,dmac-r8a77970", + "renesas,rcar-dmac"; + reg = <0 0xe7310000 0 0x10000>; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7"; + clocks = <&cpg CPG_MOD 217>; + clock-names = "fck"; + power-domains = <&sysc 32>; + resets = <&cpg 217>; + #dma-cells = <1>; + dma-channels = <8>; + }; + + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a77970", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6540000 0 96>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 520>, + <&cpg CPG_CORE 9>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>, + <&dmac2 0x31>, <&dmac2 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 520>; + status = "disabled"; + }; + + hscif1: serial@e6550000 { + compatible = "renesas,hscif-r8a77970", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6550000 0 96>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 519>, + <&cpg CPG_CORE 9>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x33>, <&dmac1 0x32>, + <&dmac2 0x33>, <&dmac2 0x32>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 519>; + status = "disabled"; + }; + + hscif2: serial@e6560000 { + compatible = "renesas,hscif-r8a77970", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6560000 0 96>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 518>, + <&cpg CPG_CORE 9>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x35>, <&dmac1 0x34>, + <&dmac2 0x35>, <&dmac2 0x34>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 518>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a77970", + "renesas,rcar-gen3-hscif", "renesas,hscif"; + reg = <0 0xe66a0000 0 96>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE 9>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x37>, <&dmac1 0x36>, + <&dmac2 0x37>, <&dmac2 0x36>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 517>; + status = "disabled"; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a77970", + "renesas,rcar-gen3-scif", + "renesas,scif"; + reg = <0 0xe6e60000 0 64>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>, + <&cpg CPG_CORE 9>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x51>, <&dmac1 0x50>, + <&dmac2 0x51>, <&dmac2 0x50>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 207>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a77970", + "renesas,rcar-gen3-scif", + "renesas,scif"; + reg = <0 0xe6e68000 0 64>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>, + <&cpg CPG_CORE 9>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x53>, <&dmac1 0x52>, + <&dmac2 0x53>, <&dmac2 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 206>; + status = "disabled"; + }; + + scif3: serial@e6c50000 { + compatible = "renesas,scif-r8a77970", + "renesas,rcar-gen3-scif", + "renesas,scif"; + reg = <0 0xe6c50000 0 64>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>, + <&cpg CPG_CORE 9>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x57>, <&dmac1 0x56>, + <&dmac2 0x57>, <&dmac2 0x56>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 204>; + status = "disabled"; + }; + + scif4: serial@e6c40000 { + compatible = "renesas,scif-r8a77970", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c40000 0 64>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>, + <&cpg CPG_CORE 9>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x59>, <&dmac1 0x58>, + <&dmac2 0x59>, <&dmac2 0x58>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 203>; + status = "disabled"; + }; + + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a77970", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc 32>; + resets = <&cpg 812>; + phy-mode = "rgmii-id"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index d144370051d5..96b7ff5cc321 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "r8a77995.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Renesas Draak board based on r8a77995"; @@ -18,6 +19,7 @@ aliases { serial0 = &scif2; + ethernet0 = &avb; }; chosen { @@ -36,7 +38,60 @@ clock-frequency = <48000000>; }; +&pfc { + avb0_pins: avb { + mux { + groups = "avb0_link", "avb0_phy_int", "avb0_mdc", + "avb0_mii"; + function = "avb0"; + }; + }; + + scif2_pins: scif2 { + groups = "scif2_data"; + function = "scif2"; + }; + + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&avb { + pinctrl-0 = <&avb0_pins>; + pinctrl-names = "default"; + renesas,no-ether-link; + phy-handle = <&phy0>; + status = "okay"; + + phy0: ethernet-phy@0 { + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio5>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + }; +}; + &scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index d0f95b78c022..56e42921e879 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -9,8 +9,9 @@ * kind, whether express or implied. */ -#include <dt-bindings/clock/renesas-cpg-mssr.h> +#include <dt-bindings/clock/r8a77995-cpg-mssr.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/r8a77995-sysc.h> / { compatible = "renesas,r8a77995"; @@ -30,14 +31,14 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0>; device_type = "cpu"; - power-domains = <&sysc 5>; + power-domains = <&sysc R8A77995_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; }; L2_CA53: cache-controller-1 { compatible = "cache"; - power-domains = <&sysc 21>; + power-domains = <&sysc R8A77995_PD_CA53_SCU>; cache-unified; cache-level = <2>; }; @@ -76,7 +77,7 @@ (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; resets = <&cpg 408>; }; @@ -97,7 +98,7 @@ "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; clocks = <&cpg CPG_MOD 402>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; resets = <&cpg 402>; status = "disabled"; }; @@ -122,7 +123,7 @@ reg = <0 0xe6160000 0 0x0200>; }; - pfc: pfc@e6060000 { + pfc: pin-controller@e6060000 { compatible = "renesas,pfc-r8a77995"; reg = <0 0xe6060000 0 0x508>; }; @@ -138,18 +139,212 @@ #power-domain-cells = <1>; }; + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a77995", + "renesas,rcar-gen3-gpio", + "renesas,gpio-rcar"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 9>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 912>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a77995", + "renesas,rcar-gen3-gpio", + "renesas,gpio-rcar"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 911>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a77995", + "renesas,rcar-gen3-gpio", + "renesas,gpio-rcar"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 910>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a77995", + "renesas,rcar-gen3-gpio", + "renesas,gpio-rcar"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 10>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 909>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a77995", + "renesas,rcar-gen3-gpio", + "renesas,gpio-rcar"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 908>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a77995", + "renesas,rcar-gen3-gpio", + "renesas,gpio-rcar"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 21>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 907>; + }; + + gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a77995", + "renesas,rcar-gen3-gpio", + "renesas,gpio-rcar"; + reg = <0 0xe6055400 0 0x50>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 14>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 906>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 906>; + }; + + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a77995", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 812>; + phy-mode = "rgmii-txid"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + scif2: serial@e6e88000 { compatible = "renesas,scif-r8a77995", "renesas,rcar-gen3-scif", "renesas,scif"; reg = <0 0xe6e88000 0 64>; interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 310>, - <&cpg CPG_CORE 16>, + <&cpg CPG_CORE R8A77995_CLK_S3D1C>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; resets = <&cpg 310>; status = "disabled"; }; + + ehci0: usb@ee080100 { + compatible = "generic-ehci"; + reg = <0 0xee080100 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + phys = <&usb2_phy0>; + phy-names = "usb"; + companion = <&ohci0>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + }; + + ohci0: usb@ee080000 { + compatible = "generic-ohci"; + reg = <0 0xee080000 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + }; + + usb2_phy0: usb-phy@ee080200 { + compatible = "renesas,usb2-phy-r8a77995", + "renesas,rcar-gen3-usb2-phy"; + reg = <0 0xee080200 0 0x700>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 703>; + #phy-cells = <0>; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 1b868df2393f..dfec9072718b 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -157,6 +157,10 @@ }; }; +&du { + status = "okay"; +}; + &ehci1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts index 8e6a65431756..3d551e3e6c23 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts @@ -60,6 +60,31 @@ regulator-max-microvolt = <12000000>; }; + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio0 30 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0m1_gpio>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_io>; + }; + vcc_sys: vcc-sys { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; @@ -78,6 +103,19 @@ }; }; +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + status = "okay"; +}; + &gmac2phy { phy-supply = <&vcc_phy>; clock_in_out = "output"; @@ -85,7 +123,7 @@ assigned-clock-rate = <50000000>; assigned-clocks = <&cru SCLK_MAC2PHY>; assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>; - status = "okay"; + }; &i2c1 { @@ -203,6 +241,38 @@ rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; }; }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = + <1 18 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdio { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + max-frequency = <150000000>; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>; + vmmc-supply = <&vcc_sd>; + status = "okay"; }; &tsadc { diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index e0518b4bc6c2..19fbaa5e7bdd 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -113,8 +113,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x0>; enable-method = "psci"; - clocks = <&cru ARMCLKL>; - operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; /* min followed by max */ }; @@ -123,8 +122,6 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x1>; enable-method = "psci"; - clocks = <&cru ARMCLKL>; - operating-points-v2 = <&cluster0_opp>; }; cpu_l2: cpu@2 { @@ -132,8 +129,6 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x2>; enable-method = "psci"; - clocks = <&cru ARMCLKL>; - operating-points-v2 = <&cluster0_opp>; }; cpu_l3: cpu@3 { @@ -141,8 +136,6 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x3>; enable-method = "psci"; - clocks = <&cru ARMCLKL>; - operating-points-v2 = <&cluster0_opp>; }; cpu_b0: cpu@100 { @@ -150,8 +143,7 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x100>; enable-method = "psci"; - clocks = <&cru ARMCLKB>; - operating-points-v2 = <&cluster1_opp>; + #cooling-cells = <2>; /* min followed by max */ }; @@ -160,8 +152,6 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x101>; enable-method = "psci"; - clocks = <&cru ARMCLKB>; - operating-points-v2 = <&cluster1_opp>; }; cpu_b2: cpu@102 { @@ -169,8 +159,6 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x102>; enable-method = "psci"; - clocks = <&cru ARMCLKB>; - operating-points-v2 = <&cluster1_opp>; }; cpu_b3: cpu@103 { @@ -178,62 +166,6 @@ compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x103>; enable-method = "psci"; - clocks = <&cru ARMCLKB>; - operating-points-v2 = <&cluster1_opp>; - }; - }; - - cluster0_opp: opp-table0 { - compatible = "operating-points-v2"; - opp-shared; - - opp00 { - opp-hz = /bits/ 64 <312000000>; - opp-microvolt = <950000>; - clock-latency-ns = <40000>; - }; - opp01 { - opp-hz = /bits/ 64 <408000000>; - opp-microvolt = <950000>; - }; - opp02 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <950000>; - }; - opp03 { - opp-hz = /bits/ 64 <816000000>; - opp-microvolt = <1025000>; - }; - opp04 { - opp-hz = /bits/ 64 <1008000000>; - opp-microvolt = <1125000>; - }; - }; - - cluster1_opp: opp-table1 { - compatible = "operating-points-v2"; - opp-shared; - - opp00 { - opp-hz = /bits/ 64 <312000000>; - opp-microvolt = <950000>; - clock-latency-ns = <40000>; - }; - opp01 { - opp-hz = /bits/ 64 <408000000>; - opp-microvolt = <950000>; - }; - opp02 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <950000>; - }; - opp03 { - opp-hz = /bits/ 64 <816000000>; - opp-microvolt = <975000>; - }; - opp04 { - opp-hz = /bits/ 64 <1008000000>; - opp-microvolt = <1050000>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts index 7fd4bfcaa38e..da373ddad74b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts @@ -49,6 +49,10 @@ model = "Firefly-RK3399 Board"; compatible = "firefly,firefly-rk3399", "rockchip,rk3399"; + chosen { + stdout-path = "serial2:1500000n8"; + }; + backlight: backlight { compatible = "pwm-backlight"; enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; @@ -255,6 +259,13 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + &i2c0 { clock-frequency = <400000>; i2c-scl-rising-time-ns = <168>; @@ -728,3 +739,19 @@ status = "okay"; dr_mode = "host"; }; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts index a3d3cea7dc4f..0384e3121f18 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts @@ -249,6 +249,10 @@ ap_i2c_dig: &i2c2 { pinctrl-0 = <&trackpad_int_l>; interrupt-parent = <&gpio1>; interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + linux,gpio-keymap = <KEY_RESERVED + KEY_RESERVED + KEY_RESERVED + BTN_LEFT>; wakeup-source; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi index 199a5118b20d..5772c52fbfd3 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi @@ -514,7 +514,8 @@ sound { compatible = "rockchip,rk3399-gru-sound"; rockchip,cpu = <&i2s0 &i2s2>; - rockchip,codec = <&max98357a &headsetcodec &codec>; + rockchip,codec = <&max98357a &headsetcodec + &codec &wacky_spi_audio>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index d79e9b3265b9..a65f7f744a40 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -1601,8 +1601,12 @@ compatible = "rockchip,rk3399-dw-hdmi"; reg = <0x0 0xff940000 0x0 0x20000>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_SFR>, <&cru PLL_VPLL>, <&cru PCLK_VIO_GRF>; - clock-names = "iahb", "isfr", "vpll", "grf"; + clocks = <&cru PCLK_HDMI_CTRL>, + <&cru SCLK_HDMI_SFR>, + <&cru PLL_VPLL>, + <&cru PCLK_VIO_GRF>, + <&cru SCLK_HDMI_CEC>; + clock-names = "iahb", "isfr", "vpll", "grf", "cec"; power-domains = <&power RK3399_PD_HDCP>; reg-io-width = <4>; rockchip,grf = <&grf>; @@ -1629,9 +1633,9 @@ compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi"; reg = <0x0 0xff960000 0x0 0x8000>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru SCLK_MIPIDPHY_REF>, <&cru PCLK_MIPI_DSI0>, - <&cru SCLK_DPHY_TX0_CFG>; - clock-names = "ref", "pclk", "phy_cfg"; + clocks = <&cru SCLK_DPHY_PLL>, <&cru PCLK_MIPI_DSI0>, + <&cru SCLK_DPHY_TX0_CFG>, <&cru PCLK_VIO_GRF>; + clock-names = "ref", "pclk", "phy_cfg", "grf"; power-domains = <&power RK3399_PD_VIO>; rockchip,grf = <&grf>; status = "disabled"; |