summaryrefslogtreecommitdiff
path: root/arch/arm64/kernel/head.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm64/kernel/head.S')
-rw-r--r--arch/arm64/kernel/head.S116
1 files changed, 104 insertions, 12 deletions
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index 2cdacd1c141b..989b1944cb71 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -102,6 +102,8 @@ pe_header:
* x23 stext() .. start_kernel() physical misalignment/KASLR offset
* x28 __create_page_tables() callee preserved temp register
* x19/x20 __primary_switch() callee preserved temp registers
+ * x24 __primary_switch() .. relocate_kernel()
+ * current RELR displacement
*/
ENTRY(stext)
bl preserve_boot_args
@@ -308,15 +310,15 @@ __create_page_tables:
adrp x0, idmap_pg_dir
adrp x3, __idmap_text_start // __pa(__idmap_text_start)
-#ifdef CONFIG_ARM64_USER_VA_BITS_52
+#ifdef CONFIG_ARM64_VA_BITS_52
mrs_s x6, SYS_ID_AA64MMFR2_EL1
and x6, x6, #(0xf << ID_AA64MMFR2_LVA_SHIFT)
mov x5, #52
cbnz x6, 1f
#endif
- mov x5, #VA_BITS
+ mov x5, #VA_BITS_MIN
1:
- adr_l x6, vabits_user
+ adr_l x6, vabits_actual
str x5, [x6]
dmb sy
dc ivac, x6 // Invalidate potentially stale cache line
@@ -724,14 +726,22 @@ __secondary_switched:
adr_l x0, secondary_data
ldr x1, [x0, #CPU_BOOT_STACK] // get secondary_data.stack
+ cbz x1, __secondary_too_slow
mov sp, x1
ldr x2, [x0, #CPU_BOOT_TASK]
+ cbz x2, __secondary_too_slow
msr sp_el0, x2
mov x29, #0
mov x30, #0
b secondary_start_kernel
ENDPROC(__secondary_switched)
+__secondary_too_slow:
+ wfe
+ wfi
+ b __secondary_too_slow
+ENDPROC(__secondary_too_slow)
+
/*
* The booting CPU updates the failed status @__early_cpu_boot_status,
* with MMU turned off.
@@ -772,7 +782,7 @@ ENTRY(__enable_mmu)
phys_to_ttbr x1, x1
phys_to_ttbr x2, x2
msr ttbr0_el1, x2 // load TTBR0
- offset_ttbr1 x1
+ offset_ttbr1 x1, x3
msr ttbr1_el1, x1 // load TTBR1
isb
msr sctlr_el1, x0
@@ -789,8 +799,8 @@ ENTRY(__enable_mmu)
ENDPROC(__enable_mmu)
ENTRY(__cpu_secondary_check52bitva)
-#ifdef CONFIG_ARM64_USER_VA_BITS_52
- ldr_l x0, vabits_user
+#ifdef CONFIG_ARM64_VA_BITS_52
+ ldr_l x0, vabits_actual
cmp x0, #52
b.ne 2f
@@ -834,14 +844,93 @@ __relocate_kernel:
0: cmp x9, x10
b.hs 1f
- ldp x11, x12, [x9], #24
- ldr x13, [x9, #-8]
- cmp w12, #R_AARCH64_RELATIVE
+ ldp x12, x13, [x9], #24
+ ldr x14, [x9, #-8]
+ cmp w13, #R_AARCH64_RELATIVE
b.ne 0b
- add x13, x13, x23 // relocate
- str x13, [x11, x23]
+ add x14, x14, x23 // relocate
+ str x14, [x12, x23]
b 0b
-1: ret
+
+1:
+#ifdef CONFIG_RELR
+ /*
+ * Apply RELR relocations.
+ *
+ * RELR is a compressed format for storing relative relocations. The
+ * encoded sequence of entries looks like:
+ * [ AAAAAAAA BBBBBBB1 BBBBBBB1 ... AAAAAAAA BBBBBB1 ... ]
+ *
+ * i.e. start with an address, followed by any number of bitmaps. The
+ * address entry encodes 1 relocation. The subsequent bitmap entries
+ * encode up to 63 relocations each, at subsequent offsets following
+ * the last address entry.
+ *
+ * The bitmap entries must have 1 in the least significant bit. The
+ * assumption here is that an address cannot have 1 in lsb. Odd
+ * addresses are not supported. Any odd addresses are stored in the RELA
+ * section, which is handled above.
+ *
+ * Excluding the least significant bit in the bitmap, each non-zero
+ * bit in the bitmap represents a relocation to be applied to
+ * a corresponding machine word that follows the base address
+ * word. The second least significant bit represents the machine
+ * word immediately following the initial address, and each bit
+ * that follows represents the next word, in linear order. As such,
+ * a single bitmap can encode up to 63 relocations in a 64-bit object.
+ *
+ * In this implementation we store the address of the next RELR table
+ * entry in x9, the address being relocated by the current address or
+ * bitmap entry in x13 and the address being relocated by the current
+ * bit in x14.
+ *
+ * Because addends are stored in place in the binary, RELR relocations
+ * cannot be applied idempotently. We use x24 to keep track of the
+ * currently applied displacement so that we can correctly relocate if
+ * __relocate_kernel is called twice with non-zero displacements (i.e.
+ * if there is both a physical misalignment and a KASLR displacement).
+ */
+ ldr w9, =__relr_offset // offset to reloc table
+ ldr w10, =__relr_size // size of reloc table
+ add x9, x9, x11 // __va(.relr)
+ add x10, x9, x10 // __va(.relr) + sizeof(.relr)
+
+ sub x15, x23, x24 // delta from previous offset
+ cbz x15, 7f // nothing to do if unchanged
+ mov x24, x23 // save new offset
+
+2: cmp x9, x10
+ b.hs 7f
+ ldr x11, [x9], #8
+ tbnz x11, #0, 3f // branch to handle bitmaps
+ add x13, x11, x23
+ ldr x12, [x13] // relocate address entry
+ add x12, x12, x15
+ str x12, [x13], #8 // adjust to start of bitmap
+ b 2b
+
+3: mov x14, x13
+4: lsr x11, x11, #1
+ cbz x11, 6f
+ tbz x11, #0, 5f // skip bit if not set
+ ldr x12, [x14] // relocate bit
+ add x12, x12, x15
+ str x12, [x14]
+
+5: add x14, x14, #8 // move to next bit's address
+ b 4b
+
+6: /*
+ * Move to the next bitmap's address. 8 is the word size, and 63 is the
+ * number of significant bits in a bitmap entry.
+ */
+ add x13, x13, #(8 * 63)
+ b 2b
+
+7:
+#endif
+ ret
+
ENDPROC(__relocate_kernel)
#endif
@@ -854,6 +943,9 @@ __primary_switch:
adrp x1, init_pg_dir
bl __enable_mmu
#ifdef CONFIG_RELOCATABLE
+#ifdef CONFIG_RELR
+ mov x24, #0 // no RELR displacement yet
+#endif
bl __relocate_kernel
#ifdef CONFIG_RANDOMIZE_BASE
ldr x8, =__primary_switched