1 files changed, 0 insertions, 241 deletions
diff --git a/arch/arm64/kvm/hyp/tlb.c b/arch/arm64/kvm/hyp/tlb.c
deleted file mode 100644
index c2bc17ca6430..000000000000
--- a/arch/arm64/kvm/hyp/tlb.c
+++ /dev/null
@@ -1,241 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2015 - ARM Ltd
- * Author: Marc Zyngier <marc.zyngier@arm.com>
- */
-
-#include <linux/irqflags.h>
-
-#include <asm/kvm_hyp.h>
-#include <asm/kvm_mmu.h>
-#include <asm/tlbflush.h>
-
-struct tlb_inv_context {
-	unsigned long	flags;
-	u64		tcr;
-	u64		sctlr;
-};
-
-static void __hyp_text __tlb_switch_to_guest_vhe(struct kvm *kvm,
-						 struct tlb_inv_context *cxt)
-{
-	u64 val;
-
-	local_irq_save(cxt->flags);
-
-	if (cpus_have_const_cap(ARM64_WORKAROUND_1165522)) {
-		/*
-		 * For CPUs that are affected by ARM erratum 1165522, we
-		 * cannot trust stage-1 to be in a correct state at that
-		 * point. Since we do not want to force a full load of the
-		 * vcpu state, we prevent the EL1 page-table walker to
-		 * allocate new TLBs. This is done by setting the EPD bits
-		 * in the TCR_EL1 register. We also need to prevent it to
-		 * allocate IPA->PA walks, so we enable the S1 MMU...
-		 */
-		val = cxt->tcr = read_sysreg_el1(SYS_TCR);
-		val |= TCR_EPD1_MASK | TCR_EPD0_MASK;
-		write_sysreg_el1(val, SYS_TCR);
-		val = cxt->sctlr = read_sysreg_el1(SYS_SCTLR);
-		val |= SCTLR_ELx_M;
-		write_sysreg_el1(val, SYS_SCTLR);
-	}
-
-	/*
-	 * With VHE enabled, we have HCR_EL2.{E2H,TGE} = {1,1}, and
-	 * most TLB operations target EL2/EL0. In order to affect the
-	 * guest TLBs (EL1/EL0), we need to change one of these two
-	 * bits. Changing E2H is impossible (goodbye TTBR1_EL2), so
-	 * let's flip TGE before executing the TLB operation.
-	 *
-	 * ARM erratum 1165522 requires some special handling (again),
-	 * as we need to make sure both stages of translation are in
-	 * place before clearing TGE. __load_guest_stage2() already
-	 * has an ISB in order to deal with this.
-	 */
-	__load_guest_stage2(kvm);
-	val = read_sysreg(hcr_el2);
-	val &= ~HCR_TGE;
-	write_sysreg(val, hcr_el2);
-	isb();
-}
-
-static void __hyp_text __tlb_switch_to_guest_nvhe(struct kvm *kvm,
-						  struct tlb_inv_context *cxt)
-{
-	if (cpus_have_const_cap(ARM64_WORKAROUND_1319367)) {
-		u64 val;
-
-		/*
-		 * For CPUs that are affected by ARM 1319367, we need to
-		 * avoid a host Stage-1 walk while we have the guest's
-		 * VMID set in the VTTBR in order to invalidate TLBs.
-		 * We're guaranteed that the S1 MMU is enabled, so we can
-		 * simply set the EPD bits to avoid any further TLB fill.
-		 */
-		val = cxt->tcr = read_sysreg_el1(SYS_TCR);
-		val |= TCR_EPD1_MASK | TCR_EPD0_MASK;
-		write_sysreg_el1(val, SYS_TCR);
-		isb();
-	}
-
-	__load_guest_stage2(kvm);
-	isb();
-}
-
-static void __hyp_text __tlb_switch_to_guest(struct kvm *kvm,
-					     struct tlb_inv_context *cxt)
-{
-	if (has_vhe())
-		__tlb_switch_to_guest_vhe(kvm, cxt);
-	else
-		__tlb_switch_to_guest_nvhe(kvm, cxt);
-}
-
-static void __hyp_text __tlb_switch_to_host_vhe(struct kvm *kvm,
-						struct tlb_inv_context *cxt)
-{
-	/*
-	 * We're done with the TLB operation, let's restore the host's
-	 * view of HCR_EL2.
-	 */
-	write_sysreg(0, vttbr_el2);
-	write_sysreg(HCR_HOST_VHE_FLAGS, hcr_el2);
-	isb();
-
-	if (cpus_have_const_cap(ARM64_WORKAROUND_1165522)) {
-		/* Restore the registers to what they were */
-		write_sysreg_el1(cxt->tcr, SYS_TCR);
-		write_sysreg_el1(cxt->sctlr, SYS_SCTLR);
-	}
-
-	local_irq_restore(cxt->flags);
-}
-
-static void __hyp_text __tlb_switch_to_host_nvhe(struct kvm *kvm,
-						 struct tlb_inv_context *cxt)
-{
-	write_sysreg(0, vttbr_el2);
-
-	if (cpus_have_const_cap(ARM64_WORKAROUND_1319367)) {
-		/* Ensure write of the host VMID */
-		isb();
-		/* Restore the host's TCR_EL1 */
-		write_sysreg_el1(cxt->tcr, SYS_TCR);
-	}
-}
-
-static void __hyp_text __tlb_switch_to_host(struct kvm *kvm,
-					    struct tlb_inv_context *cxt)
-{
-	if (has_vhe())
-		__tlb_switch_to_host_vhe(kvm, cxt);
-	else
-		__tlb_switch_to_host_nvhe(kvm, cxt);
-}
-
-void __hyp_text __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
-{
-	struct tlb_inv_context cxt;
-
-	dsb(ishst);
-
-	/* Switch to requested VMID */
-	kvm = kern_hyp_va(kvm);
-	__tlb_switch_to_guest(kvm, &cxt);
-
-	/*
-	 * We could do so much better if we had the VA as well.
-	 * Instead, we invalidate Stage-2 for this IPA, and the
-	 * whole of Stage-1. Weep...
-	 */
-	ipa >>= 12;
-	__tlbi(ipas2e1is, ipa);
-
-	/*
-	 * We have to ensure completion of the invalidation at Stage-2,
-	 * since a table walk on another CPU could refill a TLB with a
-	 * complete (S1 + S2) walk based on the old Stage-2 mapping if
-	 * the Stage-1 invalidation happened first.
-	 */
-	dsb(ish);
-	__tlbi(vmalle1is);
-	dsb(ish);
-	isb();
-
-	/*
-	 * If the host is running at EL1 and we have a VPIPT I-cache,
-	 * then we must perform I-cache maintenance at EL2 in order for
-	 * it to have an effect on the guest. Since the guest cannot hit
-	 * I-cache lines allocated with a different VMID, we don't need
-	 * to worry about junk out of guest reset (we nuke the I-cache on
-	 * VMID rollover), but we do need to be careful when remapping
-	 * executable pages for the same guest. This can happen when KSM
-	 * takes a CoW fault on an executable page, copies the page into
-	 * a page that was previously mapped in the guest and then needs
-	 * to invalidate the guest view of the I-cache for that page
-	 * from EL1. To solve this, we invalidate the entire I-cache when
-	 * unmapping a page from a guest if we have a VPIPT I-cache but
-	 * the host is running at EL1. As above, we could do better if
-	 * we had the VA.
-	 *
-	 * The moral of this story is: if you have a VPIPT I-cache, then
-	 * you should be running with VHE enabled.
-	 */
-	if (!has_vhe() && icache_is_vpipt())
-		__flush_icache_all();
-
-	__tlb_switch_to_host(kvm, &cxt);
-}
-
-void __hyp_text __kvm_tlb_flush_vmid(struct kvm *kvm)
-{
-	struct tlb_inv_context cxt;
-
-	dsb(ishst);
-
-	/* Switch to requested VMID */
-	kvm = kern_hyp_va(kvm);
-	__tlb_switch_to_guest(kvm, &cxt);
-
-	__tlbi(vmalls12e1is);
-	dsb(ish);
-	isb();
-
-	__tlb_switch_to_host(kvm, &cxt);
-}
-
-void __hyp_text __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu)
-{
-	struct kvm *kvm = kern_hyp_va(kern_hyp_va(vcpu)->kvm);
-	struct tlb_inv_context cxt;
-
-	/* Switch to requested VMID */
-	__tlb_switch_to_guest(kvm, &cxt);
-
-	__tlbi(vmalle1);
-	dsb(nsh);
-	isb();
-
-	__tlb_switch_to_host(kvm, &cxt);
-}
-
-void __hyp_text __kvm_flush_vm_context(void)
-{
-	dsb(ishst);
-	__tlbi(alle1is);
-
-	/*
-	 * VIPT and PIPT caches are not affected by VMID, so no maintenance
-	 * is necessary across a VMID rollover.
-	 *
-	 * VPIPT caches constrain lookup and maintenance to the active VMID,
-	 * so we need to invalidate lines with a stale VMID to avoid an ABA
-	 * race after multiple rollovers.
-	 *
-	 */
-	if (icache_is_vpipt())
-		asm volatile("ic ialluis");
-
-	dsb(ish);
-}