diff options
Diffstat (limited to 'arch/arm64')
132 files changed, 9255 insertions, 2005 deletions
diff --git a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts index 732daaa6e9d3..59291e0ea1ee 100644 --- a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts +++ b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts @@ -12,6 +12,9 @@ model = "Bubblegum-96"; aliases { + mmc0 = &mmc0; + mmc1 = &mmc1; + mmc2 = &mmc2; serial5 = &uart5; }; @@ -23,6 +26,24 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; + + /* Fixed regulator used in the absence of PMIC */ + vcc_3v1: vcc-3v1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.1V"; + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-always-on; + }; + + /* Fixed regulator used in the absence of PMIC */ + sd_vcc: sd-vcc { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.1V"; + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-always-on; + }; }; &i2c0 { @@ -241,6 +262,47 @@ bias-pull-up; }; }; + + mmc0_default: mmc0_default { + pinmux { + groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp", + "sd0_cmd_mfp", "sd0_clk_mfp"; + function = "sd0"; + }; + }; + + mmc2_default: mmc2_default { + pinmux { + groups = "nand0_d0_ceb3_mfp"; + function = "sd2"; + }; + }; +}; + +/* uSD */ +&mmc0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_default>; + no-sdio; + no-mmc; + no-1-8-v; + cd-gpios = <&pinctrl 120 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <&sd_vcc>; + vqmmc-supply = <&sd_vcc>; +}; + +/* eMMC */ +&mmc2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_default>; + no-sdio; + no-sd; + non-removable; + bus-width = <8>; + vmmc-supply = <&vcc_3v1>; }; &timer { diff --git a/arch/arm64/boot/dts/actions/s900.dtsi b/arch/arm64/boot/dts/actions/s900.dtsi index df3a68a3ac97..eb35cf78ab73 100644 --- a/arch/arm64/boot/dts/actions/s900.dtsi +++ b/arch/arm64/boot/dts/actions/s900.dtsi @@ -4,6 +4,7 @@ */ #include <dt-bindings/clock/actions,s900-cmu.h> +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/actions,s900-reset.h> @@ -284,5 +285,49 @@ dma-requests = <46>; clocks = <&cmu CLK_DMAC>; }; + + mmc0: mmc@e0330000 { + compatible = "actions,owl-mmc"; + reg = <0x0 0xe0330000 0x0 0x4000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_SD0>; + resets = <&cmu RESET_SD0>; + dmas = <&dma 2>; + dma-names = "mmc"; + status = "disabled"; + }; + + mmc1: mmc@e0334000 { + compatible = "actions,owl-mmc"; + reg = <0x0 0xe0334000 0x0 0x4000>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_SD1>; + resets = <&cmu RESET_SD1>; + dmas = <&dma 3>; + dma-names = "mmc"; + status = "disabled"; + }; + + mmc2: mmc@e0338000 { + compatible = "actions,owl-mmc"; + reg = <0x0 0xe0338000 0x0 0x4000>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_SD2>; + resets = <&cmu RESET_SD2>; + dmas = <&dma 4>; + dma-names = "mmc"; + status = "disabled"; + }; + + mmc3: mmc@e033c000 { + compatible = "actions,owl-mmc"; + reg = <0x0 0xe033c000 0x0 0x4000>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_SD3>; + resets = <&cmu RESET_SD3>; + dmas = <&dma 46>; + dma-names = "mmc"; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts index 04446e4716c4..f54a415f2e3b 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts @@ -114,6 +114,19 @@ }; }; +&codec { + status = "okay"; +}; + +&codec_analog { + cpvdd-supply = <®_eldo1>; + status = "okay"; +}; + +&dai { + status = "okay"; +}; + &de { status = "okay"; }; @@ -333,6 +346,22 @@ vcc-hdmi-supply = <®_dldo1>; }; +&sound { + status = "okay"; + simple-audio-card,widgets = "Headphone", "Headphone Jack", + "Microphone", "Microphone Jack", + "Microphone", "Onboard Microphone"; + simple-audio-card,routing = + "Left DAC", "AIF1 Slot 0 Left", + "Right DAC", "AIF1 Slot 0 Right", + "AIF1 Slot 0 Left ADC", "Left ADC", + "AIF1 Slot 0 Right ADC", "Right ADC", + "Headphone Jack", "HP", + "MIC2", "Microphone Jack", + "Onboard Microphone", "MBIAS", + "MIC1", "Onboard Microphone"; +}; + &spi0 { status = "okay"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts index 24f1aac366d6..d5b6e8159a33 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts @@ -63,3 +63,12 @@ reg = <1>; }; }; + +®_dc1sw { + /* + * Ethernet PHY needs 30ms to properly power up and some more + * to initialize. 100ms should be plenty of time to finish + * whole process. + */ + regulator-enable-ramp-delay = <100000>; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts index e6fb9683f213..920103ec0046 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts @@ -55,6 +55,10 @@ aliases { ethernet0 = &emac; serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; }; chosen { @@ -159,6 +163,12 @@ }; ®_dc1sw { + /* + * Ethernet PHY needs 30ms to properly power up and some more + * to initialize. 100ms should be plenty of time to finish + * whole process. + */ + regulator-enable-ramp-delay = <100000>; regulator-name = "vcc-phy"; }; @@ -204,6 +214,27 @@ status = "okay"; }; +/* On Pi-2 connector */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "disabled"; +}; + +/* On Euler connector */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "disabled"; +}; + +/* On Euler connector, RTS/CTS optional */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + status = "disabled"; +}; + &usb_otg { dr_mode = "host"; status = "okay"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts index 1069e7012c9c..970415106dcf 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts @@ -100,18 +100,41 @@ status = "okay"; }; +&de { + status = "okay"; +}; + &ehci1 { status = "okay"; }; -/* The ANX6345 eDP-bridge is on i2c0. There is no linux (mainline) - * driver for this chip at the moment, the bootloader initializes it. - * However it can be accessed with the i2c-dev driver from user space. - */ &i2c0 { clock-frequency = <100000>; status = "okay"; + + anx6345: anx6345@38 { + compatible = "analogix,anx6345"; + reg = <0x38>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */ + dvdd25-supply = <®_dldo2>; + dvdd12-supply = <®_dldo3>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + anx6345_in: endpoint { + remote-endpoint = <&tcon0_out_anx6345>; + }; + }; + }; + }; +}; + +&mixer0 { + status = "okay"; }; &mmc0 { @@ -319,6 +342,20 @@ status = "okay"; }; +&tcon0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rgb666_pins>; + + status = "okay"; +}; + +&tcon0_out { + tcon0_out_anx6345: endpoint@0 { + reg = <0>; + remote-endpoint = <&anx6345_in>; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 69128a6dfc46..d89413b87785 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -144,10 +144,10 @@ pmu { compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; }; @@ -487,6 +487,15 @@ reg = <0x1c14000 0x400>; }; + crypto: crypto@1c15000 { + compatible = "allwinner,sun50i-a64-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CE>; + }; + usb_otg: usb@1c19000 { compatible = "allwinner,sun8i-a33-musb"; reg = <0x01c19000 0x0400>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi index 82f4b44d525f..5bec574fa108 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi @@ -23,6 +23,8 @@ compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */ post-power-on-delay-ms = <200>; + clocks = <&rtc 1>; + clock-names = "ext_clock"; }; }; @@ -56,5 +58,16 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vcc3v3>; + vddio-supply = <®_vcc3v3>; + shutdown-gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */ + device-wakeup-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ + }; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi index f002a496d7cb..e92c4de5bf3b 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi @@ -127,6 +127,15 @@ allwinner,sram = <&ve_sram 1>; }; + crypto: crypto@1c15000 { + compatible = "allwinner,sun50i-h5-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CE>; + }; + mali: gpu@1e80000 { compatible = "allwinner,sun50i-h5-mali", "arm,mali-450"; reg = <0x01e80000 0x30000>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts index 1d05d570142f..e5ed1d4bfef8 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts @@ -89,6 +89,11 @@ status = "okay"; }; +&gpu { + mali-supply = <®_dcdcc>; + status = "okay"; +}; + &hdmi { status = "okay"; }; @@ -225,6 +230,7 @@ }; reg_dcdcc: dcdcc { + regulator-enable-ramp-delay = <32000>; regulator-min-microvolt = <810000>; regulator-max-microvolt = <1080000>; regulator-name = "vdd-gpu"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts index eb379cd402ac..4ed3fc2c7734 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts @@ -15,6 +15,7 @@ aliases { serial0 = &uart0; + serial1 = &uart1; }; chosen { @@ -94,6 +95,10 @@ status = "okay"; }; +&dwc3 { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -102,6 +107,11 @@ status = "okay"; }; +&gpu { + mali-supply = <®_dcdcc>; + status = "okay"; +}; + &hdmi { status = "okay"; }; @@ -237,6 +247,7 @@ }; reg_dcdcc: dcdcc { + regulator-enable-ramp-delay = <32000>; regulator-min-microvolt = <810000>; regulator-max-microvolt = <1080000>; regulator-name = "vdd-gpu"; @@ -269,6 +280,24 @@ status = "okay"; }; +/* There's the BT part of the AP6256 connected to that UART */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4345c5"; + clocks = <&rtc 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */ + host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */ + shutdown-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */ + max-speed = <1500000>; + }; +}; + &usb2otg { /* * This board doesn't have a controllable VBUS even though it @@ -285,3 +314,7 @@ usb3_vbus-supply = <®_vcc5v>; status = "okay"; }; + +&usb3phy { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi index ec9b6a578e3f..df4cbd7ef96c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi @@ -55,6 +55,11 @@ status = "okay"; }; +&gpu { + mali-supply = <®_dcdcc>; + status = "okay"; +}; + &mmc0 { vmmc-supply = <®_cldo1>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; @@ -163,6 +168,7 @@ }; reg_dcdcc: dcdcc { + regulator-enable-ramp-delay = <32000>; regulator-min-microvolt = <810000>; regulator-max-microvolt = <1080000>; regulator-name = "vdd-gpu"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts index 30102daf83cc..74899ede00fb 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts @@ -85,6 +85,11 @@ status = "okay"; }; +&gpu { + mali-supply = <®_dcdcc>; + status = "okay"; +}; + &hdmi { status = "okay"; }; @@ -221,6 +226,7 @@ }; reg_dcdcc: dcdcc { + regulator-enable-ramp-delay = <32000>; regulator-min-microvolt = <810000>; regulator-max-microvolt = <1080000>; regulator-name = "vdd-gpu"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts index 7e7cb10e3d96..bccfe1e65b6a 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts @@ -53,6 +53,10 @@ status = "okay"; }; +&gpu { + status = "okay"; +}; + &hdmi { status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index 4020a1aafa3e..d96747fcb94b 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -149,6 +149,29 @@ allwinner,sram = <&ve_sram 1>; }; + gpu: gpu@1800000 { + compatible = "allwinner,sun50i-h6-mali", + "arm,mali-t720"; + reg = <0x01800000 0x4000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>; + clock-names = "core", "bus"; + resets = <&ccu RST_BUS_GPU>; + status = "disabled"; + }; + + crypto: crypto@1904000 { + compatible = "allwinner,sun50i-h6-crypto"; + reg = <0x01904000 0x1000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>, <&ccu CLK_MBUS_CE>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_CE>; + }; + syscon: syscon@3000000 { compatible = "allwinner,sun50i-h6-system-control", "allwinner,sun50i-a64-system-control"; @@ -299,6 +322,16 @@ pins = "PH0", "PH1"; function = "uart0"; }; + + uart1_pins: uart1-pins { + pins = "PG6", "PG7"; + function = "uart1"; + }; + + uart1_rts_cts_pins: uart1-rts-cts-pins { + pins = "PG8", "PG9"; + function = "uart1"; + }; }; gic: interrupt-controller@3021000 { @@ -537,6 +570,38 @@ status = "disabled"; }; + dwc3: dwc3@5200000 { + compatible = "snps,dwc3"; + reg = <0x05200000 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_XHCI>, + <&ccu CLK_BUS_XHCI>, + <&rtc 0>; + clock-names = "ref", "bus_early", "suspend"; + resets = <&ccu RST_BUS_XHCI>; + /* + * The datasheet of the chip doesn't declare the + * peripheral function, and there's no boards known + * to have a USB Type-B port routed to the port. + * In addition, no one has tested the peripheral + * function yet. + * So set the dr_mode to "host" in the DTSI file. + */ + dr_mode = "host"; + phys = <&usb3phy>; + phy-names = "usb3-phy"; + status = "disabled"; + }; + + usb3phy: phy@5210000 { + compatible = "allwinner,sun50i-h6-usb3-phy"; + reg = <0x5210000 0x10000>; + clocks = <&ccu CLK_USB_PHY1>; + resets = <&ccu RST_USB_PHY1>; + #phy-cells = <0>; + status = "disabled"; + }; + ehci3: usb@5311000 { compatible = "allwinner,sun50i-h6-ehci", "generic-ehci"; reg = <0x05311000 0x100>; @@ -616,7 +681,6 @@ "tcon-tv0"; clock-output-names = "tcon-top-tv0"; resets = <&ccu RST_BUS_TCON_TOP>; - reset-names = "rst"; #clock-cells = <1>; ports { diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts index 66e4ffb4e929..fb11ef05d556 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -178,12 +178,12 @@ qspi_boot: partition@0 { label = "Boot and fpga data"; - reg = <0x0 0x4000000>; + reg = <0x0 0x034B0000>; }; qspi_rootfs: partition@4000000 { label = "Root Filesystem - JFFS2"; - reg = <0x4000000 0x4000000>; + reg = <0x034B0000 0x0EB50000>; }; }; }; diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index 26a039a028b8..9e3e8ce6adfe 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -35,6 +35,18 @@ clock-names = "apb_pclk"; }; + smmu_gpu: iommu@2b400000 { + compatible = "arm,mmu-400", "arm,smmu-v1"; + reg = <0x0 0x2b400000 0x0 0x10000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + #global-interrupts = <1>; + power-domains = <&scpi_devpd 1>; + dma-coherent; + status = "disabled"; + }; + smmu_pcie: iommu@2b500000 { compatible = "arm,mmu-401", "arm,smmu-v1"; reg = <0x0 0x2b500000 0x0 0x10000>; @@ -487,6 +499,21 @@ }; }; + gpu: gpu@2d000000 { + compatible = "arm,juno-mali", "arm,mali-t624"; + reg = <0 0x2d000000 0 0x10000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gpu", "job", "mmu"; + clocks = <&scpi_dvfs 2>; + power-domains = <&scpi_devpd 1>; + dma-coherent; + /* The SMMU is only really of interest to bare-metal hypervisors */ + /* iommus = <&smmu_gpu 0>; */ + status = "disabled"; + }; + sram: sram@2e000000 { compatible = "arm,juno-sram-ns", "mmio-sram"; reg = <0x0 0x2e000000 0x0 0x8000>; diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index d1d31ccad758..cb7de8d99223 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 -dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-a-plus.dtb \ +dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-4-b.dtb \ + bcm2837-rpi-3-a-plus.dtb \ bcm2837-rpi-3-b.dtb \ bcm2837-rpi-3-b-plus.dtb \ bcm2837-rpi-cm3-io3.dtb diff --git a/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts new file mode 100644 index 000000000000..d24c53682e44 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts @@ -0,0 +1,2 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "arm/bcm2711-rpi-4-b.dts" diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index a76f620f7f35..6721966140f4 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -18,8 +18,8 @@ / { compatible = "samsung,exynos5433"; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; interrupt-parent = <&gic>; @@ -249,57 +249,6 @@ }; }; - gpu: gpu@14ac0000 { - compatible = "samsung,exynos5433-mali", "arm,mali-t760"; - reg = <0x14ac0000 0x5000>; - interrupts = <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "job", "mmu", "gpu"; - clocks = <&cmu_g3d CLK_ACLK_G3D>; - clock-names = "core"; - power-domains = <&pd_g3d>; - operating-points-v2 = <&gpu_opp_table>; - status = "disabled"; - - gpu_opp_table: opp_table { - compatible = "operating-points-v2"; - - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; - opp-microvolt = <1000000>; - }; - opp-267000000 { - opp-hz = /bits/ 64 <267000000>; - opp-microvolt = <1000000>; - }; - opp-350000000 { - opp-hz = /bits/ 64 <350000000>; - opp-microvolt = <1025000>; - }; - opp-420000000 { - opp-hz = /bits/ 64 <420000000>; - opp-microvolt = <1025000>; - }; - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <1075000>; - }; - opp-550000000 { - opp-hz = /bits/ 64 <550000000>; - opp-microvolt = <1125000>; - }; - opp-600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <1150000>; - }; - opp-700000000 { - opp-hz = /bits/ 64 <700000000>; - opp-microvolt = <1150000>; - }; - }; - }; - psci { compatible = "arm,psci"; method = "smc"; @@ -311,7 +260,7 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x0 0x0 0x0 0x18000000>; chipid@10000000 { compatible = "samsung,exynos4210-chipid"; @@ -754,7 +703,7 @@ status = "disabled"; }; - mct@101c0000 { + timer@101c0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101c0000 0x800>; interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, @@ -1125,6 +1074,57 @@ power-domains = <&pd_gscl>; }; + gpu: gpu@14ac0000 { + compatible = "samsung,exynos5433-mali", "arm,mali-t760"; + reg = <0x14ac0000 0x5000>; + interrupts = <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&cmu_g3d CLK_ACLK_G3D>; + clock-names = "core"; + power-domains = <&pd_g3d>; + operating-points-v2 = <&gpu_opp_table>; + status = "disabled"; + + gpu_opp_table: opp_table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <1000000>; + }; + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-microvolt = <1000000>; + }; + opp-350000000 { + opp-hz = /bits/ 64 <350000000>; + opp-microvolt = <1025000>; + }; + opp-420000000 { + opp-hz = /bits/ 64 <420000000>; + opp-microvolt = <1025000>; + }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1075000>; + }; + opp-550000000 { + opp-hz = /bits/ 64 <550000000>; + opp-microvolt = <1125000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1150000>; + }; + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <1150000>; + }; + }; + }; + scaler_0: scaler@15000000 { compatible = "samsung,exynos5433-scaler"; reg = <0x15000000 0x1294>; @@ -1179,9 +1179,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x13a00000 0x1000>; interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_disp CLK_PCLK_SMMU_DECON0X>, - <&cmu_disp CLK_ACLK_SMMU_DECON0X>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_disp CLK_ACLK_SMMU_DECON0X>, + <&cmu_disp CLK_PCLK_SMMU_DECON0X>; power-domains = <&pd_disp>; #iommu-cells = <0>; }; @@ -1190,9 +1190,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x13a10000 0x1000>; interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_disp CLK_PCLK_SMMU_DECON1X>, - <&cmu_disp CLK_ACLK_SMMU_DECON1X>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_disp CLK_ACLK_SMMU_DECON1X>, + <&cmu_disp CLK_PCLK_SMMU_DECON1X>; #iommu-cells = <0>; power-domains = <&pd_disp>; }; @@ -1201,9 +1201,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x13a20000 0x1000>; interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_disp CLK_PCLK_SMMU_TV0X>, - <&cmu_disp CLK_ACLK_SMMU_TV0X>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_disp CLK_ACLK_SMMU_TV0X>, + <&cmu_disp CLK_PCLK_SMMU_TV0X>; #iommu-cells = <0>; power-domains = <&pd_disp>; }; @@ -1212,9 +1212,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x13a30000 0x1000>; interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_disp CLK_PCLK_SMMU_TV1X>, - <&cmu_disp CLK_ACLK_SMMU_TV1X>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_disp CLK_ACLK_SMMU_TV1X>, + <&cmu_disp CLK_PCLK_SMMU_TV1X>; #iommu-cells = <0>; power-domains = <&pd_disp>; }; @@ -1256,9 +1256,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x15040000 0x1000>; interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_mscl CLK_PCLK_SMMU_M2MSCALER0>, - <&cmu_mscl CLK_ACLK_SMMU_M2MSCALER0>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_mscl CLK_ACLK_SMMU_M2MSCALER0>, + <&cmu_mscl CLK_PCLK_SMMU_M2MSCALER0>; #iommu-cells = <0>; power-domains = <&pd_mscl>; }; @@ -1267,9 +1267,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x15050000 0x1000>; interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_mscl CLK_PCLK_SMMU_M2MSCALER1>, - <&cmu_mscl CLK_ACLK_SMMU_M2MSCALER1>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_mscl CLK_ACLK_SMMU_M2MSCALER1>, + <&cmu_mscl CLK_PCLK_SMMU_M2MSCALER1>; #iommu-cells = <0>; power-domains = <&pd_mscl>; }; @@ -1278,9 +1278,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x15060000 0x1000>; interrupts = <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_mscl CLK_PCLK_SMMU_JPEG>, - <&cmu_mscl CLK_ACLK_SMMU_JPEG>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_mscl CLK_ACLK_SMMU_JPEG>, + <&cmu_mscl CLK_PCLK_SMMU_JPEG>; #iommu-cells = <0>; power-domains = <&pd_mscl>; }; @@ -1289,9 +1289,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x15200000 0x1000>; interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_mfc CLK_PCLK_SMMU_MFC_0>, - <&cmu_mfc CLK_ACLK_SMMU_MFC_0>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_mfc CLK_ACLK_SMMU_MFC_0>, + <&cmu_mfc CLK_PCLK_SMMU_MFC_0>; #iommu-cells = <0>; power-domains = <&pd_mfc>; }; @@ -1300,9 +1300,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x15210000 0x1000>; interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_mfc CLK_PCLK_SMMU_MFC_1>, - <&cmu_mfc CLK_ACLK_SMMU_MFC_1>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_mfc CLK_ACLK_SMMU_MFC_1>, + <&cmu_mfc CLK_PCLK_SMMU_MFC_1>; #iommu-cells = <0>; power-domains = <&pd_mfc>; }; @@ -1452,7 +1452,7 @@ i2s1: i2s@14d60000 { compatible = "samsung,exynos7-i2s"; reg = <0x14d60000 0x100>; - dmas = <&pdma0 31 &pdma0 30>; + dmas = <&pdma0 31>, <&pdma0 30>; dma-names = "tx", "rx"; interrupts = <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu_peric CLK_PCLK_I2S1>, @@ -1811,7 +1811,7 @@ i2s0: i2s@11440000 { compatible = "samsung,exynos7-i2s"; reg = <0x11440000 0x100>; - dmas = <&adma 0 &adma 2>; + dmas = <&adma 0>, <&adma 2>; dma-names = "tx", "rx"; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index bcb9d8cee267..3a00ef0a17ff 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -12,8 +12,8 @@ / { compatible = "samsung,exynos7"; interrupt-parent = <&gic>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; aliases { pinctrl0 = &pinctrl_alive; @@ -78,17 +78,6 @@ }; }; - gpu: gpu@14ac0000 { - compatible = "samsung,exynos5433-mali", "arm,mali-t760"; - reg = <0x14ac0000 0x5000>; - interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "job", "mmu", "gpu"; - status = "disabled"; - /* TODO: operating points for DVFS, cooling device */ - }; - psci { compatible = "arm,psci-0.2"; method = "smc"; @@ -98,7 +87,7 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0 0 0 0x18000000>; chipid@10000000 { compatible = "samsung,exynos4210-chipid"; @@ -523,6 +512,17 @@ status = "disabled"; }; + gpu: gpu@14ac0000 { + compatible = "samsung,exynos5433-mali", "arm,mali-t760"; + reg = <0x14ac0000 0x5000>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + status = "disabled"; + /* TODO: operating points for DVFS, cooling device */ + }; + mmc_0: mmc@15740000 { compatible = "samsung,exynos7-dw-mshc-smu"; interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 93fce8f0c66d..38e344a2f0ff 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -22,6 +22,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb @@ -31,4 +32,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb + +dtb-$(CONFIG_ARCH_S32) += s32v234-evb.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts index d98346da01df..1456d83f2bee 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts @@ -194,8 +194,6 @@ }; fpga@66 { - #address-cells = <1>; - #size-cells = <0>; compatible = "fsl,ls1028aqds-fpga", "fsl,fpga-qixis-i2c", "simple-mfd"; reg = <0x66>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts index 1a69221d9a1b..9720a190049f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts @@ -184,3 +184,7 @@ &sata { status = "okay"; }; + +&usb1 { + dr_mode = "otg"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 72b9a75976a1..8e8a77eb596a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -82,22 +82,8 @@ dpclk: clock-controller@f1f0000 { compatible = "fsl,ls1028a-plldig"; reg = <0x0 0xf1f0000 0x0 0xffff>; - #clock-cells = <1>; - clocks = <&osc_27m>; - }; - - aclk: clock-axi { - compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <650000000>; - clock-output-names= "aclk"; - }; - - pclk: clock-apb { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <650000000>; - clock-output-names= "pclk"; + clocks = <&osc_27m>; }; reboot { @@ -142,6 +128,37 @@ }; }; + thermal-zones { + core-cluster { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 0>; + + trips { + core_cluster_alert: core-cluster-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + core_cluster_crit: core-cluster-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&core_cluster_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + soc: soc { compatible = "simple-bus"; #address-cells = <2>; @@ -542,7 +559,7 @@ status = "disabled"; }; - tmu: tmu@1f00000 { + tmu: tmu@1f80000 { compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f80000 0x0 0x10000>; interrupts = <0 23 0x4>; @@ -594,37 +611,6 @@ #thermal-sensor-cells = <1>; }; - thermal-zones { - core-cluster { - polling-delay-passive = <1000>; - polling-delay = <5000>; - thermal-sensors = <&tmu 0>; - - trips { - core_cluster_alert: core-cluster-alert { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - - core_cluster_crit: core-cluster-crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&core_cluster_alert>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - }; - pcie@1f0000000 { /* Integrated Endpoint Root Complex */ compatible = "pci-host-ecam-generic"; reg = <0x01 0xf0000000 0x0 0x100000>; @@ -679,7 +665,8 @@ interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, <0 223 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "DE", "SE"; - clocks = <&dpclk 0>, <&aclk>, <&aclk>, <&pclk>; + clocks = <&dpclk>, <&clockgen 2 2>, <&clockgen 2 2>, + <&clockgen 2 2>; clock-names = "pxlclk", "mclk", "aclk", "pclk"; arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; arm,malidp-arqos-value = <0xd000d000>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts index 6a6514d0e5a9..0c742befb761 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts @@ -122,6 +122,10 @@ }; }; +&usb1 { + dr_mode = "otg"; +}; + #include "fsl-ls1046-post.dtsi" &fman0 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts index 8e925df6c01c..90b198939251 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts @@ -95,5 +95,6 @@ }; &usb1 { + dr_mode = "otg"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index c31644dc71af..e883fe0fc1b7 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -662,6 +662,7 @@ reg = <0x0 0x2140000 0x0 0x10000>; interrupts = <0 28 0x4>; /* Level high type */ clocks = <&clockgen 4 1>; + dma-coherent; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; little-endian; @@ -674,6 +675,7 @@ reg = <0x0 0x2150000 0x0 0x10000>; interrupts = <0 63 0x4>; /* Level high type */ clocks = <&clockgen 4 1>; + dma-coherent; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; broken-cd; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts index f7a15f3904c2..28ab17a277bb 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts @@ -62,6 +62,8 @@ cpudai: simple-audio-card,cpu { sound-dai = <&sai3>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <32>; }; simple-audio-card,codec { @@ -94,68 +96,6 @@ }; }; -&sai3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sai3>; - assigned-clocks = <&clk IMX8MM_CLK_SAI3>; - assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; - assigned-clock-rates = <24576000>; - status = "okay"; -}; - -&snvs_pwrkey { - status = "okay"; -}; - -&uart2 { /* console */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&usbotg1 { - dr_mode = "otg"; - hnp-disable; - srp-disable; - adp-disable; - usb-role-switch; - status = "okay"; - - port { - usb1_drd_sw: endpoint { - remote-endpoint = <&typec1_dr_sw>; - }; - }; -}; - -&usdhc2 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; - pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; - pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; - cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - bus-width = <4>; - vmmc-supply = <®_usdhc2_vmmc>; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc3>; - pinctrl-1 = <&pinctrl_usdhc3_100mhz>; - pinctrl-2 = <&pinctrl_usdhc3_200mhz>; - bus-width = <8>; - non-removable; - status = "okay"; -}; - -&wdog1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdog>; - fsl,ext-reset-output; - status = "okay"; -}; - &i2c1 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -306,6 +246,86 @@ }; }; +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + pca6416: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MM_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart2 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + usb-role-switch; + status = "okay"; + + port { + usb1_drd_sw: endpoint { + remote-endpoint = <&typec1_dr_sw>; + }; + }; +}; + +&usdhc2 { + assigned-clocks = <&clk IMX8MM_CLK_USDHC2>; + assigned-clock-rates = <200000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&usdhc3 { + assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + &iomuxc { pinctrl-names = "default"; @@ -355,6 +375,13 @@ >; }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + pinctrl_pmic: pmicirq { fsl,pins = < MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index 58b8cd06cae7..10a07108ea64 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -12,7 +12,6 @@ #include "imx8mm-pinfunc.h" / { - compatible = "fsl,imx8mm"; interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; @@ -426,7 +425,7 @@ }; ocotp: ocotp-ctrl@30350000 { - compatible = "fsl,imx8mm-ocotp", "fsl,imx7d-ocotp", "syscon"; + compatible = "fsl,imx8mm-ocotp", "syscon"; reg = <0x30350000 0x10000>; clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>; /* For nvmem subnodes */ @@ -479,14 +478,18 @@ <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_IPG_AUDIO_ROOT>, <&clk IMX8MM_SYS_PLL3>, - <&clk IMX8MM_VIDEO_PLL1>; + <&clk IMX8MM_VIDEO_PLL1>, + <&clk IMX8MM_AUDIO_PLL1>, + <&clk IMX8MM_AUDIO_PLL2>; assigned-clock-parents = <&clk IMX8MM_SYS_PLL3_OUT>, <&clk IMX8MM_SYS_PLL1_800M>; assigned-clock-rates = <0>, <400000000>, <400000000>, <750000000>, - <594000000>; + <594000000>, + <393216000>, + <361267200>; }; src: reset-controller@30390000 { @@ -698,8 +701,6 @@ <&clk IMX8MM_CLK_NAND_USDHC_BUS>, <&clk IMX8MM_CLK_USDHC1_ROOT>; clock-names = "ipg", "ahb", "per"; - assigned-clocks = <&clk IMX8MM_CLK_USDHC1>; - assigned-clock-rates = <400000000>; fsl,tuning-start-tap = <20>; fsl,tuning-step= <2>; bus-width = <4>; @@ -728,8 +729,6 @@ <&clk IMX8MM_CLK_NAND_USDHC_BUS>, <&clk IMX8MM_CLK_USDHC3_ROOT>; clock-names = "ipg", "ahb", "per"; - assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>; - assigned-clock-rates = <400000000>; fsl,tuning-start-tap = <20>; fsl,tuning-step= <2>; bus-width = <4>; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts index 11c705d225d0..071949412caf 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts @@ -6,205 +6,18 @@ /dts-v1/; #include "imx8mn.dtsi" +#include "imx8mn-evk.dtsi" / { model = "NXP i.MX8MNano DDR4 EVK board"; compatible = "fsl,imx8mn-ddr4-evk", "fsl,imx8mn"; - - chosen { - stdout-path = &uart2; - }; - - reg_usdhc2_vmmc: regulator-usdhc2 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; - regulator-name = "VSD_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; }; &A53_0 { cpu-supply = <&buck2_reg>; }; -&iomuxc { - pinctrl-names = "default"; - - pinctrl_fec1: fec1grp { - fsl,pins = < - MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3 - MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 - MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f - MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f - MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f - MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f - MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 - MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 - MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 - MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 - MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f - MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 - MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 - MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f - MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 - MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 - >; - }; - - pinctrl_pmic: pmicirq { - fsl,pins = < - MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 - >; - }; - - pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc { - fsl,pins = < - MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 - MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 - >; - }; - - pinctrl_usdhc2_gpio: usdhc2grpgpio { - fsl,pins = < - MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 - MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 - MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 - MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 - MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 - MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 - MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 - >; - }; - - pinctrl_usdhc2_100mhz: usdhc2grp100mhz { - fsl,pins = < - MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 - MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 - MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 - MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 - MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 - MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 - MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 - >; - }; - - pinctrl_usdhc2_200mhz: usdhc2grp200mhz { - fsl,pins = < - MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 - MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 - MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 - MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 - MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 - MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 - MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 - >; - }; - - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000190 - MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 - MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 - MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 - MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 - MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 - MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 - MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 - MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 - MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 - MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 - >; - }; - - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { - fsl,pins = < - MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000194 - MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 - MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 - MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 - MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 - MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 - MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 - MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 - MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 - MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 - MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 - >; - }; - - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { - fsl,pins = < - MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000196 - MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 - MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 - MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 - MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 - MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 - MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 - MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 - MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 - MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 - MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 - >; - }; - - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 - >; - }; -}; - -&fec1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec1>; - phy-mode = "rgmii-id"; - phy-handle = <ðphy0>; - fsl,magic-packet; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy0: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - at803x,led-act-blind-workaround; - at803x,eee-disabled; - at803x,vddio-1p8v; - }; - }; -}; - &i2c1 { - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; - pmic@4b { compatible = "rohm,bd71847"; reg = <0x4b>; @@ -309,40 +122,10 @@ }; }; -&snvs_pwrkey { - status = "okay"; -}; - -&uart2 { /* console */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; - pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; - pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; - cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - bus-width = <4>; - vmmc-supply = <®_usdhc2_vmmc>; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc3>; - pinctrl-1 = <&pinctrl_usdhc3_100mhz>; - pinctrl-2 = <&pinctrl_usdhc3_200mhz>; - bus-width = <8>; - non-removable; - status = "okay"; -}; - -&wdog1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdog>; - fsl,ext-reset-output; - status = "okay"; +&iomuxc { + pinctrl_pmic: pmicirq { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 + >; + }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts new file mode 100644 index 000000000000..61f351958618 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 NXP + */ + +/dts-v1/; + +#include "imx8mn.dtsi" +#include "imx8mn-evk.dtsi" + +/ { + model = "NXP i.MX8MNano EVK board"; + compatible = "fsl,imx8mn-evk", "fsl,imx8mn"; +}; + +&A53_0 { + /delete-property/operating-points-v2; +}; + +&A53_1 { + /delete-property/operating-points-v2; +}; + +&A53_2 { + /delete-property/operating-points-v2; +}; + +&A53_3 { + /delete-property/operating-points-v2; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi new file mode 100644 index 000000000000..2a74330aee8c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi @@ -0,0 +1,249 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 NXP + */ + +#include "imx8mn.dtsi" + +/ { + chosen { + stdout-path = &uart2; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_led>; + + status { + label = "yellow:status"; + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart2 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usdhc2 { + assigned-clocks = <&clk IMX8MN_CLK_USDHC2>; + assigned-clock-rates = <200000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&usdhc3 { + assigned-clocks = <&clk IMX8MN_CLK_USDHC3_ROOT>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19 + >; + }; + + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < + MX8MN_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc { + fsl,pins = < + MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2grpgpio { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000190 + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000194 + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000196 + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index 98496f570720..73415490cb4c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -11,7 +11,6 @@ #include "imx8mn-pinfunc.h" / { - compatible = "fsl,imx8mn"; interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; @@ -43,6 +42,19 @@ #address-cells = <1>; #size-cells = <0>; + idle-states { + entry-method = "psci"; + + cpu_pd_wait: cpu-pd-wait { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010033>; + local-timer-stop; + entry-latency-us = <1000>; + exit-latency-us = <700>; + min-residency-us = <2700>; + }; + }; + A53_0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53"; @@ -54,6 +66,7 @@ operating-points-v2 = <&a53_opp_table>; nvmem-cells = <&cpu_speed_grade>; nvmem-cell-names = "speed_grade"; + cpu-idle-states = <&cpu_pd_wait>; }; A53_1: cpu@1 { @@ -65,6 +78,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; + cpu-idle-states = <&cpu_pd_wait>; }; A53_2: cpu@2 { @@ -76,6 +90,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; + cpu-idle-states = <&cpu_pd_wait>; }; A53_3: cpu@3 { @@ -87,6 +102,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; + cpu-idle-states = <&cpu_pd_wait>; }; A53_L2: l2-cache0 { @@ -320,7 +336,7 @@ }; ocotp: ocotp-ctrl@30350000 { - compatible = "fsl,imx8mn-ocotp", "fsl,imx7d-ocotp", "syscon"; + compatible = "fsl,imx8mn-ocotp", "fsl,imx8mm-ocotp", "syscon"; reg = <0x30350000 0x10000>; clocks = <&clk IMX8MN_CLK_OCOTP_ROOT>; #address-cells = <1>; @@ -371,7 +387,7 @@ }; src: reset-controller@30390000 { - compatible = "fsl,imx8mn-src", "syscon"; + compatible = "fsl,imx8mn-src", "fsl,imx8mq-src", "syscon"; reg = <0x30390000 0x10000>; interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; #reset-cells = <1>; @@ -428,6 +444,14 @@ #pwm-cells = <2>; status = "disabled"; }; + + system_counter: timer@306a0000 { + compatible = "nxp,sysctr-timer"; + reg = <0x306a0000 0x20000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc_24m>; + clock-names = "per"; + }; }; aips3: bus@30800000 { @@ -573,8 +597,6 @@ <&clk IMX8MN_CLK_NAND_USDHC_BUS>, <&clk IMX8MN_CLK_USDHC1_ROOT>; clock-names = "ipg", "ahb", "per"; - assigned-clocks = <&clk IMX8MN_CLK_USDHC1>; - assigned-clock-rates = <400000000>; fsl,tuning-start-tap = <20>; fsl,tuning-step= <2>; bus-width = <4>; @@ -603,8 +625,6 @@ <&clk IMX8MN_CLK_NAND_USDHC_BUS>, <&clk IMX8MN_CLK_USDHC3_ROOT>; clock-names = "ipg", "ahb", "per"; - assigned-clocks = <&clk IMX8MN_CLK_USDHC3_ROOT>; - assigned-clock-rates = <400000000>; fsl,tuning-start-tap = <20>; fsl,tuning-step= <2>; bus-width = <4>; @@ -738,6 +758,12 @@ interrupt-controller; interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; + + ddr-pmu@3d800000 { + compatible = "fsl,imx8mn-ddr-pmu", "fsl,imx8m-ddr-pmu"; + reg = <0x3d800000 0x400000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + }; }; usbphynop1: usbphynop1 { diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts index 05958124f173..c36685916683 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -48,6 +48,15 @@ gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; states = <1000000 0x0 900000 0x1>; + regulator-boot-on; + regulator-always-on; + }; + + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ir>; }; wm8524: audio-codec { @@ -115,15 +124,6 @@ }; }; -&sai2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sai2>; - assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1_BYPASS>, <&clk IMX8MQ_CLK_SAI2>; - assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL1_OUT>; - assigned-clock-rates = <0>, <24576000>; - status = "okay"; -}; - &gpio5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wifi_reset>; @@ -242,6 +242,29 @@ power-supply = <&sw1a_reg>; }; +&qspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + status = "okay"; + + n25q256a: flash@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q256a", "jedec,spi-nor"; + spi-max-frequency = <29000000>; + }; +}; + +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1_BYPASS>, <&clk IMX8MQ_CLK_SAI2>; + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL1_OUT>; + assigned-clock-rates = <0>, <24576000>; + status = "okay"; +}; + &snvs_pwrkey { status = "okay"; }; @@ -261,21 +284,9 @@ status = "okay"; }; -&qspi0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_qspi>; - status = "okay"; - - n25q256a: flash@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - compatible = "micron,n25q256a", "jedec,spi-nor"; - spi-max-frequency = <29000000>; - }; -}; - &usdhc1 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; + assigned-clock-rates = <400000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; pinctrl-1 = <&pinctrl_usdhc1_100mhz>; @@ -289,6 +300,8 @@ }; &usdhc2 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; + assigned-clock-rates = <200000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>; pinctrl-1 = <&pinctrl_usdhc2_100mhz>; @@ -340,6 +353,12 @@ >; }; + pinctrl_ir: irgrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x4f + >; + }; + pinctrl_pcie0: pcie0grp { fsl,pins = < MX8MQ_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B 0x76 diff --git a/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts b/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts index f52e872ac96f..b8cb20c01a79 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts @@ -110,6 +110,8 @@ }; &usdhc2 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; + assigned-clock-rates = <200000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts index 683a11035643..2a759dff9f87 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts @@ -780,6 +780,8 @@ }; &usdhc1 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; + assigned-clock-rates = <400000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; pinctrl-1 = <&pinctrl_usdhc1_100mhz>; @@ -790,6 +792,8 @@ }; &usdhc2 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; + assigned-clock-rates = <200000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>; pinctrl-1 = <&pinctrl_usdhc2_100mhz>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts index c832bf0fcc60..81d269296610 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts @@ -191,6 +191,8 @@ }; &usdhc1 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; + assigned-clock-rates = <400000000>; bus-width = <8>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts b/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts index 8a4aee2348ee..59da96b7143f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts @@ -207,6 +207,8 @@ }; &usdhc1 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; + assigned-clock-rates = <400000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; pinctrl-1 = <&pinctrl_usdhc1_100mhz>; @@ -217,6 +219,8 @@ }; &usdhc2 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; + assigned-clock-rates = <200000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi index d7f03c65832b..3dc44114da0e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi @@ -170,6 +170,8 @@ }; &usdhc1 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; + assigned-clock-rates = <400000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; pinctrl-1 = <&pinctrl_usdhc1_100mhz>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi index 087b5b6ebe89..e6e36cb017f2 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi @@ -62,7 +62,16 @@ reg_3p3_main: regulator-3p3-main { compatible = "regulator-fixed"; vin-supply = <®_12p0_main>; - regulator-name = "3V3V_MAIN"; + regulator-name = "3V3_MAIN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_gen_3p3: regulator-gen-3p3 { + compatible = "regulator-fixed"; + vin-supply = <®_3p3_main>; + regulator-name = "GEN_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; @@ -72,7 +81,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_usdhc2>; compatible = "regulator-fixed"; - vin-supply = <®_3p3_main>; + vin-supply = <®_gen_3p3>; regulator-name = "3V3_SD"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -253,6 +262,18 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + accelerometer@1c { + compatible = "fsl,mma8451"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_accel>; + reg = <0x1c>; + interrupt-parent = <&gpio3>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "INT2"; + vdd-supply = <®_gen_3p3>; + vddio-supply = <®_gen_3p3>; + }; + ucs1002: charger@32 { compatible = "microchip,ucs1002"; pinctrl-names = "default"; @@ -379,6 +400,11 @@ reg = <0x2c>; reset-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; }; + + watchdog@38 { + compatible = "zii,rave-wdt"; + reg = <0x38>; + }; }; &i2c4 { @@ -486,6 +512,8 @@ }; &usdhc1 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; + assigned-clock-rates = <400000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; pinctrl-1 = <&pinctrl_usdhc1_100mhz>; @@ -499,6 +527,8 @@ }; &usdhc2 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; + assigned-clock-rates = <200000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>; pinctrl-1 = <&pinctrl_usdhc2_100mhz>; @@ -513,6 +543,12 @@ }; &iomuxc { + pinctrl_accel: accelgrp { + fsl,pins = < + MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0x41 + >; + }; + pinctrl_fec1: fec1grp { fsl,pins = < MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 55a3d1c4bdf0..7f9319452b58 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -235,12 +235,26 @@ thermal-sensors = <&tmu 1>; trips { + gpu_alert: gpu-alert { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + gpu-crit { temperature = <90000>; hysteresis = <2000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&gpu_alert>; + cooling-device = + <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; vpu-thermal { @@ -854,8 +868,6 @@ <&clk IMX8MQ_CLK_NAND_USDHC_BUS>, <&clk IMX8MQ_CLK_USDHC1_ROOT>; clock-names = "ipg", "ahb", "per"; - assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; - assigned-clock-rates = <400000000>; fsl,tuning-start-tap = <20>; fsl,tuning-step = <2>; bus-width = <4>; @@ -949,6 +961,7 @@ <&clk IMX8MQ_CLK_GPU_AXI>, <&clk IMX8MQ_CLK_GPU_AHB>; clock-names = "core", "shader", "bus", "reg"; + #cooling-cells = <2>; assigned-clocks = <&clk IMX8MQ_CLK_GPU_CORE_SRC>, <&clk IMX8MQ_CLK_GPU_SHADER_SRC>, <&clk IMX8MQ_CLK_GPU_AXI>, diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts index 91eef9754101..a3f8cf195974 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts @@ -133,6 +133,8 @@ &usdhc1 { #address-cells = <1>; #size-cells = <0>; + assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>; + assigned-clock-rates = <200000000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; bus-width = <4>; @@ -149,6 +151,8 @@ /* SD */ &usdhc2 { + assigned-clocks = <&clk IMX_CONN_SDHC1_CLK>; + assigned-clock-rates = <200000000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <4>; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts new file mode 100644 index 000000000000..6b21a295c126 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright 2019 Toradex + */ + +/dts-v1/; + +#include "imx8qxp-colibri.dtsi" +#include "imx8qxp-colibri-eval-v3.dtsi" + +/ { + model = "Toradex Colibri iMX8QXP/DX on Colibri Evaluation Board V3"; + compatible = "toradex,colibri-imx8x-eval-v3", + "toradex,colibri-imx8x", "fsl,imx8qxp"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi new file mode 100644 index 000000000000..c7336f387605 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright 2019 Toradex + */ + +#include "dt-bindings/input/linux-event-codes.h" + +/ { + aliases { + rtc0 = &rtc_i2c; + rtc1 = &rtc; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys>; + + wakeup { + label = "Wake-Up"; + gpios = <&lsio_gpio3 10 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; +}; + +&adma_i2c1 { + status = "okay"; + + /* M41T0M6 real time clock on carrier board */ + rtc_i2c: rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; +}; + +/* Colibri UART_B */ +&adma_lpuart0 { + status= "okay"; +}; + +/* Colibri UART_C */ +&adma_lpuart2 { + status= "okay"; +}; + +/* Colibri UART_A */ +&adma_lpuart3 { + status= "okay"; +}; + +/* Colibri FastEthernet */ +&fec1 { + status = "okay"; +}; + +/* Colibri SD/MMC Card */ +&usdhc2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi new file mode 100644 index 000000000000..75f17a29f81e --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi @@ -0,0 +1,598 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright 2019 Toradex + */ + +#include "imx8qxp.dtsi" + +/ { + model = "Toradex Colibri iMX8QXP/DX Module"; + compatible = "toradex,colibri-imx8x", "fsl,imx8qxp"; + + chosen { + stdout-path = &adma_lpuart3; + }; + + reg_module_3v3: regulator-module-3v3 { + compatible = "regulator-fixed"; + regulator-name = "+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +/* On-module I2C */ +&adma_i2c0 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>, <&pinctrl_sgtl5000_usb_clk>; + status = "okay"; + + /* Touch controller */ + touchscreen@2c { + compatible = "adi,ad7879-1"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ad7879_int>; + reg = <0x2c>; + interrupt-parent = <&lsio_gpio3>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + touchscreen-max-pressure = <4096>; + adi,resistance-plate-x = <120>; + adi,first-conversion-delay = /bits/ 8 <3>; + adi,acquisition-time = /bits/ 8 <1>; + adi,median-filter-size = /bits/ 8 <2>; + adi,averaging = /bits/ 8 <1>; + adi,conversion-interval = /bits/ 8 <255>; + }; +}; + +/* Colibri I2C */ +&adma_i2c1 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; +}; + +/* Colibri UART_B */ +&adma_lpuart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart0>; +}; + +/* Colibri UART_C */ +&adma_lpuart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart2>; +}; + +/* Colibri UART_A */ +&adma_lpuart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart3>, <&pinctrl_lpuart3_ctrl>; +}; + +/* Colibri FastEthernet */ +&fec1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_fec1>; + pinctrl-1 = <&pinctrl_fec1_sleep>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + fsl,magic-packet; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c22"; + max-speed = <100>; + reg = <2>; + }; + }; +}; + +/* On-module eMMC */ +&usdhc1 { + bus-width = <8>; + non-removable; + no-sd; + no-sdio; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + status = "okay"; +}; + +/* Colibri SD/MMC Card */ +&usdhc2 { + bus-width = <4>; + cd-gpios = <&lsio_gpio3 9 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_module_3v3>; + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>; + disable-wp; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ext_io0>, <&pinctrl_hog0>, <&pinctrl_hog1>; + + /* On-module touch pen-down interrupt */ + pinctrl_ad7879_int: ad7879intgrp { + fsl,pins = < + IMX8QXP_MIPI_CSI0_I2C0_SCL_LSIO_GPIO3_IO05 0x21 + >; + }; + + /* Colibri Analogue Inputs */ + pinctrl_adc0: adc0grp { + fsl,pins = < + IMX8QXP_ADC_IN0_ADMA_ADC_IN0 0x60 /* SODIMM 8 */ + IMX8QXP_ADC_IN1_ADMA_ADC_IN1 0x60 /* SODIMM 6 */ + IMX8QXP_ADC_IN4_ADMA_ADC_IN4 0x60 /* SODIMM 4 */ + IMX8QXP_ADC_IN5_ADMA_ADC_IN5 0x60 /* SODIMM 2 */ + >; + }; + + pinctrl_can_int: canintgrp { + fsl,pins = < + IMX8QXP_QSPI0A_DQS_LSIO_GPIO3_IO13 0x40 /* SODIMM 73 */ + >; + }; + + pinctrl_csi_ctl: csictlgrp { + fsl,pins = < + IMX8QXP_QSPI0A_SS0_B_LSIO_GPIO3_IO14 0x20 /* SODIMM 77 */ + IMX8QXP_QSPI0A_SS1_B_LSIO_GPIO3_IO15 0x20 /* SODIMM 89 */ + >; + }; + + pinctrl_ext_io0: extio0grp { + fsl,pins = < + IMX8QXP_ENET0_RGMII_RXD3_LSIO_GPIO5_IO08 0x06000040 /* SODIMM 135 */ + >; + }; + + /* Colibri Ethernet: On-module 100Mbps PHY Micrel KSZ8041 */ + pinctrl_fec1: fec1grp { + fsl,pins = < + IMX8QXP_ENET0_MDC_CONN_ENET0_MDC 0x06000020 + IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020 + IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x61 + IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RCLK50M_OUT 0x06000061 + IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x61 + IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x61 + IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x61 + IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x61 + IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x61 + IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RMII_RX_ER 0x61 + >; + }; + + pinctrl_fec1_sleep: fec1slpgrp { + fsl,pins = < + IMX8QXP_ENET0_MDC_LSIO_GPIO5_IO11 0x06000041 + IMX8QXP_ENET0_MDIO_LSIO_GPIO5_IO10 0x06000041 + IMX8QXP_ENET0_RGMII_TX_CTL_LSIO_GPIO4_IO30 0x41 + IMX8QXP_ENET0_RGMII_TXC_LSIO_GPIO4_IO29 0x41 + IMX8QXP_ENET0_RGMII_TXD0_LSIO_GPIO4_IO31 0x41 + IMX8QXP_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00 0x41 + IMX8QXP_ENET0_RGMII_RX_CTL_LSIO_GPIO5_IO04 0x41 + IMX8QXP_ENET0_RGMII_RXD0_LSIO_GPIO5_IO05 0x41 + IMX8QXP_ENET0_RGMII_RXD1_LSIO_GPIO5_IO06 0x41 + IMX8QXP_ENET0_RGMII_RXD2_LSIO_GPIO5_IO07 0x41 + >; + }; + + /* Colibri optional CAN on UART_B RTS/CTS */ + pinctrl_flexcan1: flexcan0grp { + fsl,pins = < + IMX8QXP_FLEXCAN0_TX_ADMA_FLEXCAN0_TX 0x21 /* SODIMM 32 */ + IMX8QXP_FLEXCAN0_RX_ADMA_FLEXCAN0_RX 0x21 /* SODIMM 34 */ + >; + }; + + /* Colibri optional CAN on PS2 */ + pinctrl_flexcan2: flexcan1grp { + fsl,pins = < + IMX8QXP_FLEXCAN1_TX_ADMA_FLEXCAN1_TX 0x21 /* SODIMM 55 */ + IMX8QXP_FLEXCAN1_RX_ADMA_FLEXCAN1_RX 0x21 /* SODIMM 63 */ + >; + }; + + /* Colibri optional CAN on UART_A TXD/RXD */ + pinctrl_flexcan3: flexcan2grp { + fsl,pins = < + IMX8QXP_FLEXCAN2_TX_ADMA_FLEXCAN2_TX 0x21 /* SODIMM 35 */ + IMX8QXP_FLEXCAN2_RX_ADMA_FLEXCAN2_RX 0x21 /* SODIMM 33 */ + >; + }; + + /* Colibri LCD Back-Light GPIO */ + pinctrl_gpio_bl_on: gpioblongrp { + fsl,pins = < + IMX8QXP_QSPI0A_DATA3_LSIO_GPIO3_IO12 0x60 /* SODIMM 71 */ + >; + }; + + pinctrl_gpiokeys: gpiokeysgrp { + fsl,pins = < + IMX8QXP_QSPI0A_DATA1_LSIO_GPIO3_IO10 0x06700041 /* SODIMM 45 */ + >; + }; + + pinctrl_hog0: hog0grp { + fsl,pins = < + IMX8QXP_ENET0_RGMII_TXD3_LSIO_GPIO5_IO02 0x06000020 /* SODIMM 65 */ + IMX8QXP_CSI_D07_CI_PI_D09 0x61 /* SODIMM 65 */ + IMX8QXP_QSPI0A_DATA2_LSIO_GPIO3_IO11 0x20 /* SODIMM 69 */ + IMX8QXP_SAI0_TXC_LSIO_GPIO0_IO26 0x20 /* SODIMM 79 */ + IMX8QXP_CSI_D02_CI_PI_D04 0x61 /* SODIMM 79 */ + IMX8QXP_ENET0_RGMII_RXC_LSIO_GPIO5_IO03 0x06000020 /* SODIMM 85 */ + IMX8QXP_CSI_D06_CI_PI_D08 0x61 /* SODIMM 85 */ + IMX8QXP_QSPI0B_SCLK_LSIO_GPIO3_IO17 0x20 /* SODIMM 95 */ + IMX8QXP_SAI0_RXD_LSIO_GPIO0_IO27 0x20 /* SODIMM 97 */ + IMX8QXP_CSI_D03_CI_PI_D05 0x61 /* SODIMM 97 */ + IMX8QXP_QSPI0B_DATA0_LSIO_GPIO3_IO18 0x20 /* SODIMM 99 */ + IMX8QXP_SAI0_TXFS_LSIO_GPIO0_IO28 0x20 /* SODIMM 101 */ + IMX8QXP_CSI_D00_CI_PI_D02 0x61 /* SODIMM 101 */ + IMX8QXP_SAI0_TXD_LSIO_GPIO0_IO25 0x20 /* SODIMM 103 */ + IMX8QXP_CSI_D01_CI_PI_D03 0x61 /* SODIMM 103 */ + IMX8QXP_QSPI0B_DATA1_LSIO_GPIO3_IO19 0x20 /* SODIMM 105 */ + IMX8QXP_QSPI0B_DATA2_LSIO_GPIO3_IO20 0x20 /* SODIMM 107 */ + IMX8QXP_USB_SS3_TC2_LSIO_GPIO4_IO05 0x20 /* SODIMM 127 */ + IMX8QXP_USB_SS3_TC3_LSIO_GPIO4_IO06 0x20 /* SODIMM 131 */ + IMX8QXP_USB_SS3_TC1_LSIO_GPIO4_IO04 0x20 /* SODIMM 133 */ + IMX8QXP_CSI_PCLK_LSIO_GPIO3_IO00 0x20 /* SODIMM 96 */ + IMX8QXP_QSPI0B_DATA3_LSIO_GPIO3_IO21 0x20 /* SODIMM 98 */ + IMX8QXP_SAI1_RXFS_LSIO_GPIO0_IO31 0x20 /* SODIMM 100 */ + IMX8QXP_QSPI0B_DQS_LSIO_GPIO3_IO22 0x20 /* SODIMM 102 */ + IMX8QXP_QSPI0B_SS0_B_LSIO_GPIO3_IO23 0x20 /* SODIMM 104 */ + IMX8QXP_QSPI0B_SS1_B_LSIO_GPIO3_IO24 0x20 /* SODIMM 106 */ + >; + }; + + pinctrl_hog1: hog1grp { + fsl,pins = < + IMX8QXP_CSI_MCLK_LSIO_GPIO3_IO01 0x20 /* SODIMM 75 */ + IMX8QXP_QSPI0A_SCLK_LSIO_GPIO3_IO16 0x20 /* SODIMM 93 */ + >; + }; + + /* + * This pin is used in the SCFW as a UART. Using it from + * Linux would require rewritting the SCFW board file. + */ + pinctrl_hog_scfw: hogscfwgrp { + fsl,pins = < + IMX8QXP_SCU_GPIO0_00_LSIO_GPIO2_IO03 0x20 /* SODIMM 144 */ + >; + }; + + /* On Module I2C */ + pinctrl_i2c0: i2c0grp { + fsl,pins = < + IMX8QXP_MIPI_CSI0_GPIO0_00_ADMA_I2C0_SCL 0x06000021 + IMX8QXP_MIPI_CSI0_GPIO0_01_ADMA_I2C0_SDA 0x06000021 + >; + }; + + /* MIPI DSI I2C accessible on SODIMM (X1) and FFC (X2) */ + pinctrl_i2c0_mipi_lvds0: i2c0mipilvds0grp { + fsl,pins = < + IMX8QXP_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL 0xc6000020 /* SODIMM 140 */ + IMX8QXP_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA 0xc6000020 /* SODIMM 142 */ + >; + }; + + /* MIPI CSI I2C accessible on SODIMM (X1) and FFC (X3) */ + pinctrl_i2c0_mipi_lvds1: i2c0mipilvds1grp { + fsl,pins = < + IMX8QXP_MIPI_DSI1_I2C0_SCL_MIPI_DSI1_I2C0_SCL 0xc6000020 /* SODIMM 186 */ + IMX8QXP_MIPI_DSI1_I2C0_SDA_MIPI_DSI1_I2C0_SDA 0xc6000020 /* SODIMM 188 */ + >; + }; + + /* Colibri I2C */ + pinctrl_i2c1: i2c1grp { + fsl,pins = < + IMX8QXP_MIPI_DSI0_GPIO0_00_ADMA_I2C1_SCL 0x06000021 /* SODIMM 196 */ + IMX8QXP_MIPI_DSI0_GPIO0_01_ADMA_I2C1_SDA 0x06000021 /* SODIMM 194 */ + >; + }; + + /* Colibri Parallel RGB LCD Interface */ + pinctrl_lcdif: lcdifgrp { + fsl,pins = < + IMX8QXP_MCLK_OUT0_ADMA_LCDIF_CLK 0x60 /* SODIMM 56 */ + IMX8QXP_SPI3_CS0_ADMA_LCDIF_HSYNC 0x60 /* SODIMM 68 */ + IMX8QXP_MCLK_IN0_ADMA_LCDIF_VSYNC 0x60 /* SODIMM 82 */ + IMX8QXP_MCLK_IN1_ADMA_LCDIF_EN 0x60 /* SODIMM 44 */ + IMX8QXP_USDHC1_RESET_B_LSIO_GPIO4_IO19 0x60 /* SODIMM 44 */ + IMX8QXP_ESAI0_FSR_ADMA_LCDIF_D00 0x60 /* SODIMM 76 */ + IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21 0x60 /* SODIMM 76 */ + IMX8QXP_ESAI0_FST_ADMA_LCDIF_D01 0x60 /* SODIMM 70 */ + IMX8QXP_ESAI0_SCKR_ADMA_LCDIF_D02 0x60 /* SODIMM 60 */ + IMX8QXP_ESAI0_SCKT_ADMA_LCDIF_D03 0x60 /* SODIMM 58 */ + IMX8QXP_ESAI0_TX0_ADMA_LCDIF_D04 0x60 /* SODIMM 78 */ + IMX8QXP_ESAI0_TX1_ADMA_LCDIF_D05 0x60 /* SODIMM 72 */ + IMX8QXP_ESAI0_TX2_RX3_ADMA_LCDIF_D06 0x60 /* SODIMM 80 */ + IMX8QXP_ESAI0_TX3_RX2_ADMA_LCDIF_D07 0x60 /* SODIMM 46 */ + IMX8QXP_ESAI0_TX4_RX1_ADMA_LCDIF_D08 0x60 /* SODIMM 62 */ + IMX8QXP_ESAI0_TX5_RX0_ADMA_LCDIF_D09 0x60 /* SODIMM 48 */ + IMX8QXP_SPDIF0_RX_ADMA_LCDIF_D10 0x60 /* SODIMM 74 */ + IMX8QXP_SPDIF0_TX_ADMA_LCDIF_D11 0x60 /* SODIMM 50 */ + IMX8QXP_SPDIF0_EXT_CLK_ADMA_LCDIF_D12 0x60 /* SODIMM 52 */ + IMX8QXP_SPI3_SCK_ADMA_LCDIF_D13 0x60 /* SODIMM 54 */ + IMX8QXP_SPI3_SDO_ADMA_LCDIF_D14 0x60 /* SODIMM 66 */ + IMX8QXP_SPI3_SDI_ADMA_LCDIF_D15 0x60 /* SODIMM 64 */ + IMX8QXP_SPI3_CS1_ADMA_LCDIF_D16 0x60 /* SODIMM 57 */ + IMX8QXP_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01 0x60 /* SODIMM 57 */ + IMX8QXP_UART1_CTS_B_ADMA_LCDIF_D17 0x60 /* SODIMM 61 */ + >; + }; + + /* Colibri SPI */ + pinctrl_lpspi2: lpspi2grp { + fsl,pins = < + IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00 0x21 /* SODIMM 86 */ + IMX8QXP_SPI2_SDO_ADMA_SPI2_SDO 0x06000040 /* SODIMM 92 */ + IMX8QXP_SPI2_SDI_ADMA_SPI2_SDI 0x06000040 /* SODIMM 90 */ + IMX8QXP_SPI2_SCK_ADMA_SPI2_SCK 0x06000040 /* SODIMM 88 */ + >; + }; + + /* Colibri UART_B */ + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + IMX8QXP_UART0_RX_ADMA_UART0_RX 0x06000020 /* SODIMM 36 */ + IMX8QXP_UART0_TX_ADMA_UART0_TX 0x06000020 /* SODIMM 38 */ + IMX8QXP_FLEXCAN0_RX_ADMA_UART0_RTS_B 0x06000020 /* SODIMM 34 */ + IMX8QXP_FLEXCAN0_TX_ADMA_UART0_CTS_B 0x06000020 /* SODIMM 32 */ + >; + }; + + /* Colibri UART_C */ + pinctrl_lpuart2: lpuart2grp { + fsl,pins = < + IMX8QXP_UART2_RX_ADMA_UART2_RX 0x06000020 /* SODIMM 19 */ + IMX8QXP_UART2_TX_ADMA_UART2_TX 0x06000020 /* SODIMM 21 */ + >; + }; + + /* Colibri UART_A */ + pinctrl_lpuart3: lpuart3grp { + fsl,pins = < + IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX 0x06000020 /* SODIMM 33 */ + IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX 0x06000020 /* SODIMM 35 */ + >; + }; + + /* Colibri UART_A Control */ + pinctrl_lpuart3_ctrl: lpuart3ctrlgrp { + fsl,pins = < + IMX8QXP_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00 0x20 /* SODIMM 23 */ + IMX8QXP_SAI1_RXD_LSIO_GPIO0_IO29 0x20 /* SODIMM 25 */ + IMX8QXP_SAI1_RXC_LSIO_GPIO0_IO30 0x20 /* SODIMM 27 */ + IMX8QXP_CSI_RESET_LSIO_GPIO3_IO03 0x20 /* SODIMM 29 */ + IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22 0x20 /* SODIMM 31 */ + IMX8QXP_CSI_EN_LSIO_GPIO3_IO02 0x20 /* SODIMM 37 */ + >; + }; + + /* On module wifi module */ + pinctrl_pcieb: pciebgrp { + fsl,pins = < + IMX8QXP_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01 0x04000061 /* SODIMM 178 */ + IMX8QXP_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02 0x04000061 /* SODIMM 94 */ + IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00 0x60 /* SODIMM 81 */ + >; + }; + + /* Colibri PWM_A */ + pinctrl_pwm_a: pwmagrp { + /* both pins are connected together, reserve the unused CSI_D05 */ + fsl,pins = < + IMX8QXP_CSI_D05_CI_PI_D07 0x61 /* SODIMM 59 */ + IMX8QXP_SPI0_CS1_ADMA_LCD_PWM0_OUT 0x60 /* SODIMM 59 */ + >; + }; + + /* Colibri PWM_B */ + pinctrl_pwm_b: pwmbgrp { + fsl,pins = < + IMX8QXP_UART1_TX_LSIO_PWM0_OUT 0x60 /* SODIMM 28 */ + >; + }; + + /* Colibri PWM_C */ + pinctrl_pwm_c: pwmcgrp { + fsl,pins = < + IMX8QXP_UART1_RX_LSIO_PWM1_OUT 0x60 /* SODIMM 30 */ + >; + }; + + /* Colibri PWM_D */ + pinctrl_pwm_d: pwmdgrp { + /* both pins are connected together, reserve the unused CSI_D04 */ + fsl,pins = < + IMX8QXP_CSI_D04_CI_PI_D06 0x61 /* SODIMM 67 */ + IMX8QXP_UART1_RTS_B_LSIO_PWM2_OUT 0x60 /* SODIMM 67 */ + >; + }; + + /* On-module I2S */ + pinctrl_sai0: sai0grp { + fsl,pins = < + IMX8QXP_SPI0_SDI_ADMA_SAI0_TXD 0x06000040 + IMX8QXP_SPI0_CS0_ADMA_SAI0_RXD 0x06000040 + IMX8QXP_SPI0_SCK_ADMA_SAI0_TXC 0x06000040 + IMX8QXP_SPI0_SDO_ADMA_SAI0_TXFS 0x06000040 + >; + }; + + /* Colibri Audio Analogue Microphone GND */ + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + /* MIC GND EN */ + IMX8QXP_MIPI_CSI0_I2C0_SDA_LSIO_GPIO3_IO06 0x41 + >; + }; + + /* On-module SGTL5000 clock */ + pinctrl_sgtl5000_usb_clk: sgtl5000usbclkgrp { + fsl,pins = < + IMX8QXP_ADC_IN3_ADMA_ACM_MCLK_OUT0 0x21 + >; + }; + + /* On-module USB interrupt */ + pinctrl_usb3503a: usb3503agrp { + fsl,pins = < + IMX8QXP_MIPI_CSI0_MCLK_OUT_LSIO_GPIO3_IO04 0x61 + >; + }; + + /* Colibri USB Client Cable Detect */ + pinctrl_usbc_det: usbcdetgrp { + fsl,pins = < + IMX8QXP_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09 0x06000040 /* SODIMM 137 */ + >; + }; + + /* USB Host Power Enable */ + pinctrl_usbh1_reg: usbh1reggrp { + fsl,pins = < + IMX8QXP_USB_SS3_TC0_LSIO_GPIO4_IO03 0x06000040 /* SODIMM 129 */ + >; + }; + + /* On-module eMMC */ + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x21 + IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21 + IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21 + IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21 + IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21 + IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21 + IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21 + IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21 + IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21 + IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41 + IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x21 + IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21 + IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21 + IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21 + IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21 + IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21 + IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21 + IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21 + IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21 + IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41 + IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x21 + IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21 + IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21 + IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21 + IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21 + IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21 + IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21 + IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21 + IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21 + IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41 + IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21 + >; + }; + + /* Colibri SD/MMC Card Detect */ + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + IMX8QXP_QSPI0A_DATA0_LSIO_GPIO3_IO09 0x06000021 /* SODIMM 43 */ + >; + }; + + pinctrl_usdhc2_gpio_sleep: usdhc2gpioslpgrp { + fsl,pins = < + IMX8QXP_QSPI0A_DATA0_LSIO_GPIO3_IO09 0x60 /* SODIMM 43 */ + >; + }; + + /* Colibri SD/MMC Card */ + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 47 */ + IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 190 */ + IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21 /* SODIMM 192 */ + IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21 /* SODIMM 49 */ + IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21 /* SODIMM 51 */ + IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21 /* SODIMM 53 */ + IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 47 */ + IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 190 */ + IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21 /* SODIMM 192 */ + IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21 /* SODIMM 49 */ + IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21 /* SODIMM 51 */ + IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21 /* SODIMM 53 */ + IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 47 */ + IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 190 */ + IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21 /* SODIMM 192 */ + IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21 /* SODIMM 49 */ + IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21 /* SODIMM 51 */ + IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21 /* SODIMM 53 */ + IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 + >; + }; + + pinctrl_usdhc2_sleep: usdhc2slpgrp { + fsl,pins = < + IMX8QXP_USDHC1_CLK_LSIO_GPIO4_IO23 0x60 /* SODIMM 47 */ + IMX8QXP_USDHC1_CMD_LSIO_GPIO4_IO24 0x60 /* SODIMM 190 */ + IMX8QXP_USDHC1_DATA0_LSIO_GPIO4_IO25 0x60 /* SODIMM 192 */ + IMX8QXP_USDHC1_DATA1_LSIO_GPIO4_IO26 0x60 /* SODIMM 49 */ + IMX8QXP_USDHC1_DATA2_LSIO_GPIO4_IO27 0x60 /* SODIMM 51 */ + IMX8QXP_USDHC1_DATA3_LSIO_GPIO4_IO28 0x60 /* SODIMM 53 */ + IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 + >; + }; + + pinctrl_wifi: wifigrp { + fsl,pins = < + IMX8QXP_SCU_BOOT_MODE3_SCU_DSC_RTC_CLOCK_OUTPUT_32K 0x20 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts index 19468058e6ae..d3d26cca7d52 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts @@ -137,6 +137,8 @@ }; &usdhc1 { + assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>; + assigned-clock-rates = <200000000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; bus-width = <8>; @@ -147,6 +149,8 @@ }; &usdhc2 { + assigned-clocks = <&clk IMX_CONN_SDHC1_CLK>; + assigned-clock-rates = <200000000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <4>; @@ -234,3 +238,7 @@ &adma_dsp { status = "okay"; }; + +&scu_key { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index 1133b412182a..9646a41e0532 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/imx8-clock.h> #include <dt-bindings/firmware/imx/rsrc.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/pads-imx8qxp.h> @@ -174,6 +175,12 @@ #power-domain-cells = <1>; }; + scu_key: scu-key { + compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key"; + linux,keycodes = <KEY_POWER>; + status = "disabled"; + }; + rtc: rtc { compatible = "fsl,imx8qxp-sc-rtc"; }; @@ -361,8 +368,6 @@ <&conn_lpcg IMX_CONN_LPCG_SDHC0_PER_CLK>, <&conn_lpcg IMX_CONN_LPCG_SDHC0_HCLK>; clock-names = "ipg", "per", "ahb"; - assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>; - assigned-clock-rates = <200000000>; power-domains = <&pd IMX_SC_R_SDHC_0>; status = "disabled"; }; @@ -376,8 +381,6 @@ <&conn_lpcg IMX_CONN_LPCG_SDHC1_PER_CLK>, <&conn_lpcg IMX_CONN_LPCG_SDHC1_HCLK>; clock-names = "ipg", "per", "ahb"; - assigned-clocks = <&clk IMX_CONN_SDHC1_CLK>; - assigned-clock-rates = <200000000>; power-domains = <&pd IMX_SC_R_SDHC_1>; fsl,tuning-start-tap = <20>; fsl,tuning-step= <2>; @@ -393,8 +396,6 @@ <&conn_lpcg IMX_CONN_LPCG_SDHC2_PER_CLK>, <&conn_lpcg IMX_CONN_LPCG_SDHC2_HCLK>; clock-names = "ipg", "per", "ahb"; - assigned-clocks = <&clk IMX_CONN_SDHC2_CLK>; - assigned-clock-rates = <200000000>; power-domains = <&pd IMX_SC_R_SDHC_2>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/s32v234-evb.dts b/arch/arm64/boot/dts/freescale/s32v234-evb.dts new file mode 100644 index 000000000000..4b802518cefc --- /dev/null +++ b/arch/arm64/boot/dts/freescale/s32v234-evb.dts @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * Copyright 2016-2017 NXP + */ + +/dts-v1/; +#include "s32v234.dtsi" + +/ { + model = "NXP S32V234-EVB2 Board"; + compatible = "fsl,s32v234-evb", "fsl,s32v234"; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/s32v234.dtsi b/arch/arm64/boot/dts/freescale/s32v234.dtsi new file mode 100644 index 000000000000..e746b9c48f7a --- /dev/null +++ b/arch/arm64/boot/dts/freescale/s32v234.dtsi @@ -0,0 +1,139 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * Copyright 2016-2018 NXP + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/memreserve/ 0x80000000 0x00010000; + +/ { + compatible = "fsl,s32v234"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x80000000>; + next-level-cache = <&cluster0_l2_cache>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x80000000>; + next-level-cache = <&cluster0_l2_cache>; + }; + + cpu2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x100>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x80000000>; + next-level-cache = <&cluster1_l2_cache>; + }; + + cpu3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x101>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x80000000>; + next-level-cache = <&cluster1_l2_cache>; + }; + + cluster0_l2_cache: l2-cache0 { + compatible = "cache"; + }; + + cluster1_l2_cache: l2-cache1 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>; + /* clock-frequency might be modified by u-boot, depending on the + * chip version. + */ + clock-frequency = <10000000>; + }; + + gic: interrupt-controller@7d001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x7d001000 0 0x1000>, + <0 0x7d002000 0 0x2000>, + <0 0x7d004000 0 0x2000>, + <0 0x7d006000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + aips0: aips-bus@40000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + reg = <0x0 0x40000000 0x0 0x7d000>; + ranges; + + uart0: serial@40053000 { + compatible = "fsl,s32v234-linflexuart"; + reg = <0x0 0x40053000 0x0 0x1000>; + interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + }; + + aips1: aips-bus@40080000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + reg = <0x0 0x40080000 0x0 0x70000>; + ranges; + + uart1: serial@400bc000 { + compatible = "fsl,s32v234-linflexuart"; + reg = <0x0 0x400bc000 0x0 0x1000>; + interrupts = <GIC_SPI 60 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 108e2a4227f6..2072b637b5af 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -260,6 +260,7 @@ compatible = "hisilicon,hi6220-aoctrl", "syscon"; reg = <0x0 0xf7800000 0x0 0x2000>; #clock-cells = <1>; + #reset-cells = <1>; }; sys_ctrl: sys_ctrl@f7030000 { @@ -1021,6 +1022,43 @@ clock-names = "apb_pclk"; cpu = <&cpu7>; }; + + mali: gpu@f4080000 { + compatible = "hisilicon,hi6220-mali", "arm,mali-450"; + reg = <0x0 0xf4080000 0x0 0x00040000>; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-names = "gp", + "gpmmu", + "pp", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pp2", + "ppmmu2", + "pp3", + "ppmmu3"; + clocks = <&media_ctrl HI6220_G3D_CLK>, + <&media_ctrl HI6220_G3D_PCLK>; + clock-names = "core", "bus"; + assigned-clocks = <&media_ctrl HI6220_G3D_CLK>, + <&media_ctrl HI6220_G3D_PCLK>; + assigned-clock-rates = <500000000>, <144000000>; + reset-names = "ao_g3d", "media_g3d"; + resets = <&ao_ctrl AO_G3D>, <&media_ctrl MEDIA_G3D>; + }; }; }; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi index 36abc25320a8..94090c6fb946 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi +++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi @@ -12,6 +12,19 @@ #address-cells = <2>; #size-cells = <2>; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + service_reserved: svcbuffer@0 { + compatible = "shared-dma-pool"; + reg = <0x0 0x0 0x0 0x1000000>; + alignment = <0x1000>; + no-map; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -81,6 +94,13 @@ interrupt-parent = <&intc>; ranges = <0 0 0 0xffffffff>; + base_fpga_region { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "fpga-region"; + fpga-mgr = <&fpga_mgr>; + }; + gmac0: ethernet@ff800000 { compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; reg = <0xff800000 0x2000>; @@ -442,5 +462,17 @@ status = "disabled"; }; + + firmware { + svc { + compatible = "intel,stratix10-svc"; + method = "smc"; + memory-region = <&service_reserved>; + + fpga_mgr: fpga-mgr { + compatible = "intel,stratix10-soc-fpga-mgr"; + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts index 7814a9e8eb08..e794a12ba7c5 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts +++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts @@ -18,6 +18,24 @@ stdout-path = "serial0:115200n8"; }; + leds { + compatible = "gpio-leds"; + hps0 { + label = "hps_led0"; + gpios = <&portb 20 GPIO_ACTIVE_HIGH>; + }; + + hps1 { + label = "hps_led1"; + gpios = <&portb 19 GPIO_ACTIVE_HIGH>; + }; + + hps2 { + label = "hps_led2"; + gpios = <&portb 21 GPIO_ACTIVE_HIGH>; + }; + }; + memory { device_type = "memory"; /* We expect the bootloader to fill in the reg */ @@ -70,6 +88,46 @@ status = "okay"; }; +&usb0 { + status = "okay"; + disable-over-current; +}; + &watchdog0 { status = "okay"; }; + +&qspi { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mt25qu02g"; + reg = <0>; + spi-max-frequency = <100000000>; + + m25p,fast-read; + cdns,page-size = <256>; + cdns,block-size = <16>; + cdns,read-delay = <1>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + qspi_boot: partition@0 { + label = "Boot and fpga data"; + reg = <0x0 0x034B0000>; + }; + + qspi_rootfs: partition@34B0000 { + label = "Root Filesystem - JFFS2"; + reg = <0x034B0000 0x0EB50000>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi index c8dc9c20fba3..64f3b135068d 100644 --- a/arch/arm64/boot/dts/lg/lg1312.dtsi +++ b/arch/arm64/boot/dts/lg/lg1312.dtsi @@ -124,7 +124,7 @@ amba { #address-cells = <2>; #size-cells = <1>; - #interrupts-cells = <3>; + #interrupt-cells = <3>; compatible = "simple-bus"; interrupt-parent = <&gic>; diff --git a/arch/arm64/boot/dts/lg/lg1313.dtsi b/arch/arm64/boot/dts/lg/lg1313.dtsi index 82c6645b58b7..ac23592ab011 100644 --- a/arch/arm64/boot/dts/lg/lg1313.dtsi +++ b/arch/arm64/boot/dts/lg/lg1313.dtsi @@ -124,7 +124,7 @@ amba { #address-cells = <2>; #size-cells = <1>; - #interrupts-cells = <3>; + #interrupt-cells = <3>; compatible = "simple-bus"; interrupt-parent = <&gic>; diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index 243338c914a4..f1b5127f0b89 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -10,3 +10,6 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin-singleshot.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8080-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += cn9130-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += cn9131-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db.dtb diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts new file mode 100644 index 000000000000..bd9ed9dc9c3e --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board with eMMC + * Copyright (C) 2018 Marvell + * + * Romain Perier <romain.perier@free-electrons.com> + * Konstantin Porotchkin <kostap@marvell.com> + * + */ +/* + * Schematic available at http://espressobin.net/wp-content/uploads/2017/08/ESPRESSObin_V5_Schematics.pdf + */ + +#include "armada-3720-espressobin.dtsi" + +/ { + model = "Globalscale Marvell ESPRESSOBin Board (eMMC)"; + compatible = "globalscale,espressobin-emmc", "globalscale,espressobin", + "marvell,armada3720", "marvell,armada3710"; +}; + +/* U11 */ +&sdhci0 { + non-removable; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,xenon-emmc; + marvell,xenon-tun-count = <9>; + marvell,pad-type = "fixed-1-8v"; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc_pins>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + mmccard: mmccard@0 { + compatible = "mmc-card"; + reg = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts new file mode 100644 index 000000000000..6e876a6d9532 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7 with eMMC + * Copyright (C) 2018 Marvell + * + * Romain Perier <romain.perier@free-electrons.com> + * Konstantin Porotchkin <kostap@marvell.com> + * + */ +/* + * Schematic available at http://wiki.espressobin.net/tiki-download_file.php?fileId=200 + */ + +#include "armada-3720-espressobin.dtsi" + +/ { + model = "Globalscale Marvell ESPRESSOBin Board V7 (eMMC)"; + compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7", + "globalscale,espressobin", "marvell,armada3720", + "marvell,armada3710"; +}; + +&switch0 { + ports { + port@1 { + reg = <1>; + label = "lan1"; + phy-handle = <&switch0phy0>; + }; + + port@3 { + reg = <3>; + label = "wan"; + phy-handle = <&switch0phy2>; + }; + }; +}; + +/* U11 */ +&sdhci0 { + non-removable; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,xenon-emmc; + marvell,xenon-tun-count = <9>; + marvell,pad-type = "fixed-1-8v"; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc_pins>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + mmccard: mmccard@0 { + compatible = "mmc-card"; + reg = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts new file mode 100644 index 000000000000..0f8405d085fd --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7 + * Copyright (C) 2018 Marvell + * + * Romain Perier <romain.perier@free-electrons.com> + * Konstantin Porotchkin <kostap@marvell.com> + * + */ +/* + * Schematic available at http://wiki.espressobin.net/tiki-download_file.php?fileId=200 + */ + +#include "armada-3720-espressobin.dtsi" + +/ { + model = "Globalscale Marvell ESPRESSOBin Board V7"; + compatible = "globalscale,espressobin-v7", "globalscale,espressobin", + "marvell,armada3720", "marvell,armada3710"; +}; + +&switch0 { + ports { + port@1 { + reg = <1>; + label = "lan1"; + phy-handle = <&switch0phy0>; + }; + + port@3 { + reg = <3>; + label = "wan"; + phy-handle = <&switch0phy2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts index fbcf03f86c96..1542d836c090 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts @@ -12,191 +12,9 @@ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include "armada-372x.dtsi" +#include "armada-3720-espressobin.dtsi" / { model = "Globalscale Marvell ESPRESSOBin Board"; compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x00000000 0x00000000 0x20000000>; - }; - - vcc_sd_reg1: regulator { - compatible = "regulator-gpio"; - regulator-name = "vcc_sd1"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - - gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>; - gpios-states = <0>; - states = <1800000 0x1 - 3300000 0x0>; - enable-active-high; - }; -}; - -/* J9 */ -&pcie0 { - status = "okay"; - phys = <&comphy1 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; -}; - -/* J6 */ -&sata { - status = "okay"; - phys = <&comphy2 0>; - phy-names = "sata-phy"; -}; - -/* J1 */ -&sdhci1 { - wp-inverted; - bus-width = <4>; - cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>; - marvell,pad-type = "sd"; - vqmmc-supply = <&vcc_sd_reg1>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdio_pins>; - status = "okay"; -}; - -/* U11 */ -&sdhci0 { - non-removable; - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs400-1_8v; - marvell,xenon-emmc; - marvell,xenon-tun-count = <9>; - marvell,pad-type = "fixed-1-8v"; - - pinctrl-names = "default"; - pinctrl-0 = <&mmc_pins>; -/* - * This eMMC is not populated on all boards, so disable it by - * default and let the bootloader enable it, if it is present - */ - status = "disabled"; -}; - -&spi0 { - status = "okay"; - - flash@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <104000000>; - m25p,fast-read; - }; -}; - -/* Exported on the micro USB connector J5 through an FTDI */ -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; - status = "okay"; -}; - -/* - * Connector J17 and J18 expose a number of different features. Some pins are - * multiplexed. This is the case for instance for the following features: - * - UART1 (pin 24 = RX, pin 26 = TX). See armada-3720-db.dts for an example of - * how to enable it. Beware that the signals are 1.8V TTL. - * - I2C - * - SPI - * - MMC - */ - -/* J7 */ -&usb3 { - status = "okay"; -}; - -/* J8 */ -&usb2 { - status = "okay"; -}; - -&mdio { - switch0: switch0@1 { - compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - dsa,member = <0 0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <ð0>; - phy-mode = "rgmii-id"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "wan"; - phy-handle = <&switch0phy0>; - }; - - port@2 { - reg = <2>; - label = "lan0"; - phy-handle = <&switch0phy1>; - }; - - port@3 { - reg = <3>; - label = "lan1"; - phy-handle = <&switch0phy2>; - }; - - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - switch0phy0: switch0phy0@11 { - reg = <0x11>; - }; - switch0phy1: switch0phy1@12 { - reg = <0x12>; - }; - switch0phy2: switch0phy2@13 { - reg = <0x13>; - }; - }; - }; -}; - -ð0 { - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>, <&smi_pins>; - phy-mode = "rgmii-id"; - status = "okay"; - - fixed-link { - speed = <1000>; - full-duplex; - }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi new file mode 100644 index 000000000000..53b8ac55a7f3 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board + * Copyright (C) 2016 Marvell + * + * Romain Perier <romain.perier@free-electrons.com> + * + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "armada-372x.dtsi" + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + vcc_sd_reg1: regulator { + compatible = "regulator-gpio"; + regulator-name = "vcc_sd1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + states = <1800000 0x1 + 3300000 0x0>; + enable-active-high; + }; +}; + +/* J9 */ +&pcie0 { + status = "okay"; + phys = <&comphy1 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; +}; + +/* J6 */ +&sata { + status = "okay"; + phys = <&comphy2 0>; + phy-names = "sata-phy"; +}; + +/* J1 */ +&sdhci1 { + wp-inverted; + bus-width = <4>; + cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>; + marvell,pad-type = "sd"; + vqmmc-supply = <&vcc_sd_reg1>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pins>; + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + reg = <0>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <104000000>; + m25p,fast-read; + }; +}; + +/* Exported on the micro USB connector J5 through an FTDI */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +}; + +/* + * Connector J17 and J18 expose a number of different features. Some pins are + * multiplexed. This is the case for instance for the following features: + * - UART1 (pin 24 = RX, pin 26 = TX). See armada-3720-db.dts for an example of + * how to enable it. Beware that the signals are 1.8V TTL. + * - I2C + * - SPI + * - MMC + */ + +/* J7 */ +&usb3 { + status = "okay"; +}; + +/* J8 */ +&usb2 { + status = "okay"; +}; + +&mdio { + switch0: switch0@1 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + dsa,member = <0 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <ð0>; + phy-mode = "rgmii-id"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "wan"; + phy-handle = <&switch0phy0>; + }; + + port@2 { + reg = <2>; + label = "lan0"; + phy-handle = <&switch0phy1>; + }; + + port@3 { + reg = <3>; + label = "lan1"; + phy-handle = <&switch0phy2>; + }; + + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy0: switch0phy0@11 { + reg = <0x11>; + }; + switch0phy1: switch0phy1@12 { + reg = <0x12>; + }; + switch0phy2: switch0phy2@13 { + reg = <0x13>; + }; + }; + }; +}; + +ð0 { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>, <&smi_pins>; + phy-mode = "rgmii-id"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts index d105986c6be1..38372fcc6430 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts @@ -111,6 +111,14 @@ /* enabled by U-Boot if SFP module is present */ status = "disabled"; }; + + firmware { + turris-mox-rwtm { + compatible = "cznic,turris-mox-rwtm"; + mboxes = <&rwtm 0>; + status = "okay"; + }; + }; }; &i2c0 { diff --git a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi index e5c6d7c25819..293403a1a333 100644 --- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi @@ -17,23 +17,23 @@ /* * Instantiate the CP110 */ -#define CP110_NAME cp0 -#define CP110_BASE f2000000 -#define CP110_PCIE_IO_BASE 0xf9000000 -#define CP110_PCIE_MEM_BASE 0xf6000000 -#define CP110_PCIE0_BASE f2600000 -#define CP110_PCIE1_BASE f2620000 -#define CP110_PCIE2_BASE f2640000 +#define CP11X_NAME cp0 +#define CP11X_BASE f2000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xf6000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f2600000 +#define CP11X_PCIE1_BASE f2620000 +#define CP11X_PCIE2_BASE f2640000 #include "armada-cp110.dtsi" -#undef CP110_NAME -#undef CP110_BASE -#undef CP110_PCIE_IO_BASE -#undef CP110_PCIE_MEM_BASE -#undef CP110_PCIE0_BASE -#undef CP110_PCIE1_BASE -#undef CP110_PCIE2_BASE +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE &cp0_gpio1 { status = "okay"; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi index d250f4b2bfed..572e2610e0a3 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi @@ -179,8 +179,7 @@ num-lanes = <4>; num-viewport = <8>; reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>; - ranges = <0x81000000 0x0 0xf9010000 0x0 0xf9010000 0x0 0x10000 - 0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>; + ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>; phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>, <&cp0_comphy2 0>, <&cp0_comphy3 0>; phy-names = "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy", diff --git a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi index 8129b40f12a4..ee67c70bf02e 100644 --- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi @@ -19,44 +19,44 @@ /* * Instantiate the master CP110 */ -#define CP110_NAME cp0 -#define CP110_BASE f2000000 -#define CP110_PCIE_IO_BASE 0xf9000000 -#define CP110_PCIE_MEM_BASE 0xf6000000 -#define CP110_PCIE0_BASE f2600000 -#define CP110_PCIE1_BASE f2620000 -#define CP110_PCIE2_BASE f2640000 +#define CP11X_NAME cp0 +#define CP11X_BASE f2000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xf6000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f2600000 +#define CP11X_PCIE1_BASE f2620000 +#define CP11X_PCIE2_BASE f2640000 #include "armada-cp110.dtsi" -#undef CP110_NAME -#undef CP110_BASE -#undef CP110_PCIE_IO_BASE -#undef CP110_PCIE_MEM_BASE -#undef CP110_PCIE0_BASE -#undef CP110_PCIE1_BASE -#undef CP110_PCIE2_BASE +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE /* * Instantiate the slave CP110 */ -#define CP110_NAME cp1 -#define CP110_BASE f4000000 -#define CP110_PCIE_IO_BASE 0xfd000000 -#define CP110_PCIE_MEM_BASE 0xfa000000 -#define CP110_PCIE0_BASE f4600000 -#define CP110_PCIE1_BASE f4620000 -#define CP110_PCIE2_BASE f4640000 +#define CP11X_NAME cp1 +#define CP11X_BASE f4000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xfa000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f4600000 +#define CP11X_PCIE1_BASE f4620000 +#define CP11X_PCIE2_BASE f4640000 #include "armada-cp110.dtsi" -#undef CP110_NAME -#undef CP110_BASE -#undef CP110_PCIE_IO_BASE -#undef CP110_PCIE_MEM_BASE -#undef CP110_PCIE0_BASE -#undef CP110_PCIE1_BASE -#undef CP110_PCIE2_BASE +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE /* The 80x0 has two CP blocks, but uses only one block from each. */ &cp1_gpio1 { diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi index 9024a2d9db07..09849558a776 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi @@ -21,6 +21,14 @@ reg = <0x000>; enable-method = "psci"; #cooling-cells = <2>; + clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2>; }; cpu1: cpu@1 { device_type = "cpu"; @@ -28,6 +36,21 @@ reg = <0x001>; enable-method = "psci"; #cooling-cells = <2>; + clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2>; + }; + + l2: l2-cache { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; }; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi index c25bc65727b5..3db427122f9e 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi @@ -22,6 +22,13 @@ enable-method = "psci"; #cooling-cells = <2>; clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_0>; }; cpu1: cpu@1 { device_type = "cpu"; @@ -30,6 +37,13 @@ enable-method = "psci"; #cooling-cells = <2>; clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_0>; }; cpu2: cpu@100 { device_type = "cpu"; @@ -38,6 +52,13 @@ enable-method = "psci"; #cooling-cells = <2>; clocks = <&cpu_clk 1>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; }; cpu3: cpu@101 { device_type = "cpu"; @@ -46,6 +67,27 @@ enable-method = "psci"; #cooling-cells = <2>; clocks = <&cpu_clk 1>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; + }; + + l2_0: l2-cache0 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + }; + + l2_1: l2-cache1 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; }; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index d06dd198f2c7..866628679ac7 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -5,454 +5,26 @@ * Device Tree file for Marvell Armada AP806. */ -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/thermal/thermal.h> - -/dts-v1/; +#define AP_NAME ap806 +#include "armada-ap80x.dtsi" / { model = "Marvell Armada AP806"; compatible = "marvell,armada-ap806"; - #address-cells = <2>; - #size-cells = <2>; - - aliases { - serial0 = &uart0; - serial1 = &uart1; - gpio0 = &ap_gpio; - spi0 = &spi0; - }; - - psci { - compatible = "arm,psci-0.2"; - method = "smc"; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - /* - * This area matches the mapping done with a - * mainline U-Boot, and should be updated by the - * bootloader. - */ - - psci-area@4000000 { - reg = <0x0 0x4000000 0x0 0x200000>; - no-map; - }; - }; - - ap806 { - #address-cells = <2>; - #size-cells = <2>; - compatible = "simple-bus"; - interrupt-parent = <&gic>; - ranges; - - config-space@f0000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0x0 0x0 0xf0000000 0x1000000>; - - gic: interrupt-controller@210000 { - compatible = "arm,gic-400"; - #interrupt-cells = <3>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - interrupt-controller; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - reg = <0x210000 0x10000>, - <0x220000 0x20000>, - <0x240000 0x20000>, - <0x260000 0x20000>; - - gic_v2m0: v2m@280000 { - compatible = "arm,gic-v2m-frame"; - msi-controller; - reg = <0x280000 0x1000>; - arm,msi-base-spi = <160>; - arm,msi-num-spis = <32>; - }; - gic_v2m1: v2m@290000 { - compatible = "arm,gic-v2m-frame"; - msi-controller; - reg = <0x290000 0x1000>; - arm,msi-base-spi = <192>; - arm,msi-num-spis = <32>; - }; - gic_v2m2: v2m@2a0000 { - compatible = "arm,gic-v2m-frame"; - msi-controller; - reg = <0x2a0000 0x1000>; - arm,msi-base-spi = <224>; - arm,msi-num-spis = <32>; - }; - gic_v2m3: v2m@2b0000 { - compatible = "arm,gic-v2m-frame"; - msi-controller; - reg = <0x2b0000 0x1000>; - arm,msi-base-spi = <256>; - arm,msi-num-spis = <32>; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - }; - - pmu { - compatible = "arm,cortex-a72-pmu"; - interrupt-parent = <&pic>; - interrupts = <17>; - }; - - odmi: odmi@300000 { - compatible = "marvell,odmi-controller"; - interrupt-controller; - msi-controller; - marvell,odmi-frames = <4>; - reg = <0x300000 0x4000>, - <0x304000 0x4000>, - <0x308000 0x4000>, - <0x30C000 0x4000>; - marvell,spi-base = <128>, <136>, <144>, <152>; - }; - - gicp: gicp@3f0040 { - compatible = "marvell,ap806-gicp"; - reg = <0x3f0040 0x10>; - marvell,spi-ranges = <64 64>, <288 64>; - msi-controller; - }; - - pic: interrupt-controller@3f0100 { - compatible = "marvell,armada-8k-pic"; - reg = <0x3f0100 0x10>; - #interrupt-cells = <1>; - interrupt-controller; - interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; - }; - - sei: interrupt-controller@3f0200 { - compatible = "marvell,ap806-sei"; - reg = <0x3f0200 0x40>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <1>; - interrupt-controller; - msi-controller; - }; - - xor@400000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x400000 0x1000>, - <0x410000 0x1000>; - msi-parent = <&gic_v2m0>; - clocks = <&ap_clk 3>; - dma-coherent; - }; - - xor@420000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x420000 0x1000>, - <0x430000 0x1000>; - msi-parent = <&gic_v2m0>; - clocks = <&ap_clk 3>; - dma-coherent; - }; - - xor@440000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x440000 0x1000>, - <0x450000 0x1000>; - msi-parent = <&gic_v2m0>; - clocks = <&ap_clk 3>; - dma-coherent; - }; - - xor@460000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x460000 0x1000>, - <0x470000 0x1000>; - msi-parent = <&gic_v2m0>; - clocks = <&ap_clk 3>; - dma-coherent; - }; - - spi0: spi@510600 { - compatible = "marvell,armada-380-spi"; - reg = <0x510600 0x50>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ap_clk 3>; - status = "disabled"; - }; - - i2c0: i2c@511000 { - compatible = "marvell,mv78230-i2c"; - reg = <0x511000 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; - timeout-ms = <1000>; - clocks = <&ap_clk 3>; - status = "disabled"; - }; - - uart0: serial@512000 { - compatible = "snps,dw-apb-uart"; - reg = <0x512000 0x100>; - reg-shift = <2>; - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; - reg-io-width = <1>; - clocks = <&ap_clk 3>; - status = "disabled"; - }; - - uart1: serial@512100 { - compatible = "snps,dw-apb-uart"; - reg = <0x512100 0x100>; - reg-shift = <2>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; - reg-io-width = <1>; - clocks = <&ap_clk 3>; - status = "disabled"; - - }; - - watchdog: watchdog@610000 { - compatible = "arm,sbsa-gwdt"; - reg = <0x610000 0x1000>, <0x600000 0x1000>; - interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; - }; - - ap_sdhci0: sdhci@6e0000 { - compatible = "marvell,armada-ap806-sdhci"; - reg = <0x6e0000 0x300>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core"; - clocks = <&ap_clk 4>; - dma-coherent; - marvell,xenon-phy-slow-mode; - status = "disabled"; - }; - - ap_syscon: system-controller@6f4000 { - compatible = "syscon", "simple-mfd"; - reg = <0x6f4000 0x2000>; - - ap_clk: clock { - compatible = "marvell,ap806-clock"; - #clock-cells = <1>; - }; - - ap_pinctrl: pinctrl { - compatible = "marvell,ap806-pinctrl"; - - uart0_pins: uart0-pins { - marvell,pins = "mpp11", "mpp19"; - marvell,function = "uart0"; - }; - }; - - ap_gpio: gpio@1040 { - compatible = "marvell,armada-8k-gpio"; - offset = <0x1040>; - ngpios = <20>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&ap_pinctrl 0 0 20>; - }; - }; - - ap_syscon1: system-controller@6f8000 { - compatible = "syscon", "simple-mfd"; - reg = <0x6f8000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - - cpu_clk: clock-cpu@278 { - compatible = "marvell,ap806-cpu-clock"; - clocks = <&ap_clk 0>, <&ap_clk 1>; - #clock-cells = <1>; - reg = <0x278 0xa30>; - }; +}; - ap_thermal: thermal-sensor@80 { - compatible = "marvell,armada-ap806-thermal"; - reg = <0x80 0x10>; - interrupt-parent = <&sei>; - interrupts = <18>; - #thermal-sensor-cells = <1>; - }; - }; - }; +&ap_syscon0 { + ap_clk: clock { + compatible = "marvell,ap806-clock"; + #clock-cells = <1>; }; +}; - /* - * The thermal IP features one internal sensor plus, if applicable, one - * remote channel wired to one sensor per CPU. - * - * Only one thermal zone per AP/CP may trigger interrupts at a time, the - * first one that will have a critical trip point will be chosen. - */ - thermal-zones { - ap_thermal_ic: ap-thermal-ic { - polling-delay-passive = <0>; /* Interrupt driven */ - polling-delay = <0>; /* Interrupt driven */ - - thermal-sensors = <&ap_thermal 0>; - - trips { - ap_crit: ap-crit { - temperature = <100000>; /* mC degrees */ - hysteresis = <2000>; /* mC degrees */ - type = "critical"; - }; - }; - - cooling-maps { }; - }; - - ap_thermal_cpu0: ap-thermal-cpu0 { - polling-delay-passive = <1000>; - polling-delay = <1000>; - - thermal-sensors = <&ap_thermal 1>; - - trips { - cpu0_hot: cpu0-hot { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu0_emerg: cpu0-emerg { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - }; - - cooling-maps { - map0_hot: map0-hot { - trip = <&cpu0_hot>; - cooling-device = <&cpu0 1 2>, - <&cpu1 1 2>; - }; - map0_emerg: map0-ermerg { - trip = <&cpu0_emerg>; - cooling-device = <&cpu0 3 3>, - <&cpu1 3 3>; - }; - }; - }; - - ap_thermal_cpu1: ap-thermal-cpu1 { - polling-delay-passive = <1000>; - polling-delay = <1000>; - - thermal-sensors = <&ap_thermal 2>; - - trips { - cpu1_hot: cpu1-hot { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu1_emerg: cpu1-emerg { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - }; - - cooling-maps { - map1_hot: map1-hot { - trip = <&cpu1_hot>; - cooling-device = <&cpu0 1 2>, - <&cpu1 1 2>; - }; - map1_emerg: map1-emerg { - trip = <&cpu1_emerg>; - cooling-device = <&cpu0 3 3>, - <&cpu1 3 3>; - }; - }; - }; - - ap_thermal_cpu2: ap-thermal-cpu2 { - polling-delay-passive = <1000>; - polling-delay = <1000>; - - thermal-sensors = <&ap_thermal 3>; - - trips { - cpu2_hot: cpu2-hot { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu2_emerg: cpu2-emerg { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - }; - - cooling-maps { - map2_hot: map2-hot { - trip = <&cpu2_hot>; - cooling-device = <&cpu2 1 2>, - <&cpu3 1 2>; - }; - map2_emerg: map2-emerg { - trip = <&cpu2_emerg>; - cooling-device = <&cpu2 3 3>, - <&cpu3 3 3>; - }; - }; - }; - - ap_thermal_cpu3: ap-thermal-cpu3 { - polling-delay-passive = <1000>; - polling-delay = <1000>; - - thermal-sensors = <&ap_thermal 4>; - - trips { - cpu3_hot: cpu3-hot { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu3_emerg: cpu3-emerg { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - }; - - cooling-maps { - map3_hot: map3-bhot { - trip = <&cpu3_hot>; - cooling-device = <&cpu2 1 2>, - <&cpu3 1 2>; - }; - map3_emerg: map3-emerg { - trip = <&cpu3_emerg>; - cooling-device = <&cpu2 3 3>, - <&cpu3 3 3>; - }; - }; - }; +&ap_syscon1 { + cpu_clk: clock-cpu@278 { + compatible = "marvell,ap806-cpu-clock"; + clocks = <&ap_clk 0>, <&ap_clk 1>; + #clock-cells = <1>; + reg = <0x278 0xa30>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi new file mode 100644 index 000000000000..840466e143b4 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Marvell Armada AP807 Quad + * + * Copyright (C) 2019 Marvell Technology Group Ltd. + */ + +#include "armada-ap807.dtsi" + +/ { + model = "Marvell Armada AP807 Quad"; + compatible = "marvell,armada-ap807-quad", "marvell,armada-ap807"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x000>; + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_0>; + }; + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x001>; + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_0>; + }; + cpu2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x100>; + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 1>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; + }; + cpu3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x101>; + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 1>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; + }; + + l2_0: l2-cache0 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + }; + + l2_1: l2-cache1 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-ap807.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi new file mode 100644 index 000000000000..623010f3ca89 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Marvell Armada AP807 + * + * Copyright (C) 2019 Marvell Technology Group Ltd. + */ + +#define AP_NAME ap807 +#include "armada-ap80x.dtsi" + +/ { + model = "Marvell Armada AP807"; + compatible = "marvell,armada-ap807"; +}; + +&ap_syscon0 { + ap_clk: clock { + compatible = "marvell,ap807-clock"; + #clock-cells = <1>; + }; +}; + +&ap_syscon1 { + cpu_clk: clock-cpu { + compatible = "marvell,ap807-cpu-clock"; + clocks = <&ap_clk 0>, <&ap_clk 1>; + #clock-cells = <1>; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi new file mode 100644 index 000000000000..e7438c21ccee --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi @@ -0,0 +1,444 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell Technology Group Ltd. + * + * Device Tree file for Marvell Armada AP80x. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + gpio0 = &ap_gpio; + spi0 = &spi0; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * This area matches the mapping done with a + * mainline U-Boot, and should be updated by the + * bootloader. + */ + + psci-area@4000000 { + reg = <0x0 0x4000000 0x0 0x200000>; + no-map; + }; + }; + + AP_NAME { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + config-space@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x0 0x0 0xf0000000 0x1000000>; + + gic: interrupt-controller@210000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + reg = <0x210000 0x10000>, + <0x220000 0x20000>, + <0x240000 0x20000>, + <0x260000 0x20000>; + + gic_v2m0: v2m@280000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x280000 0x1000>; + arm,msi-base-spi = <160>; + arm,msi-num-spis = <32>; + }; + gic_v2m1: v2m@290000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x290000 0x1000>; + arm,msi-base-spi = <192>; + arm,msi-num-spis = <32>; + }; + gic_v2m2: v2m@2a0000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x2a0000 0x1000>; + arm,msi-base-spi = <224>; + arm,msi-num-spis = <32>; + }; + gic_v2m3: v2m@2b0000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x2b0000 0x1000>; + arm,msi-base-spi = <256>; + arm,msi-num-spis = <32>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu { + compatible = "arm,cortex-a72-pmu"; + interrupt-parent = <&pic>; + interrupts = <17>; + }; + + odmi: odmi@300000 { + compatible = "marvell,odmi-controller"; + interrupt-controller; + msi-controller; + marvell,odmi-frames = <4>; + reg = <0x300000 0x4000>, + <0x304000 0x4000>, + <0x308000 0x4000>, + <0x30C000 0x4000>; + marvell,spi-base = <128>, <136>, <144>, <152>; + }; + + gicp: gicp@3f0040 { + compatible = "marvell,ap806-gicp"; + reg = <0x3f0040 0x10>; + marvell,spi-ranges = <64 64>, <288 64>; + msi-controller; + }; + + pic: interrupt-controller@3f0100 { + compatible = "marvell,armada-8k-pic"; + reg = <0x3f0100 0x10>; + #interrupt-cells = <1>; + interrupt-controller; + interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; + }; + + sei: interrupt-controller@3f0200 { + compatible = "marvell,ap806-sei"; + reg = <0x3f0200 0x40>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-controller; + msi-controller; + }; + + xor@400000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x400000 0x1000>, + <0x410000 0x1000>; + msi-parent = <&gic_v2m0>; + clocks = <&ap_clk 3>; + dma-coherent; + }; + + xor@420000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x420000 0x1000>, + <0x430000 0x1000>; + msi-parent = <&gic_v2m0>; + clocks = <&ap_clk 3>; + dma-coherent; + }; + + xor@440000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x440000 0x1000>, + <0x450000 0x1000>; + msi-parent = <&gic_v2m0>; + clocks = <&ap_clk 3>; + dma-coherent; + }; + + xor@460000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x460000 0x1000>, + <0x470000 0x1000>; + msi-parent = <&gic_v2m0>; + clocks = <&ap_clk 3>; + dma-coherent; + }; + + spi0: spi@510600 { + compatible = "marvell,armada-380-spi"; + reg = <0x510600 0x50>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ap_clk 3>; + status = "disabled"; + }; + + i2c0: i2c@511000 { + compatible = "marvell,mv78230-i2c"; + reg = <0x511000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + timeout-ms = <1000>; + clocks = <&ap_clk 3>; + status = "disabled"; + }; + + uart0: serial@512000 { + compatible = "snps,dw-apb-uart"; + reg = <0x512000 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clocks = <&ap_clk 3>; + status = "disabled"; + }; + + uart1: serial@512100 { + compatible = "snps,dw-apb-uart"; + reg = <0x512100 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clocks = <&ap_clk 3>; + status = "disabled"; + + }; + + watchdog: watchdog@610000 { + compatible = "arm,sbsa-gwdt"; + reg = <0x610000 0x1000>, <0x600000 0x1000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + }; + + ap_sdhci0: sdhci@6e0000 { + compatible = "marvell,armada-ap806-sdhci"; + reg = <0x6e0000 0x300>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core"; + clocks = <&ap_clk 4>; + dma-coherent; + marvell,xenon-phy-slow-mode; + status = "disabled"; + }; + + ap_syscon0: system-controller@6f4000 { + compatible = "syscon", "simple-mfd"; + reg = <0x6f4000 0x2000>; + + ap_pinctrl: pinctrl { + compatible = "marvell,ap806-pinctrl"; + + uart0_pins: uart0-pins { + marvell,pins = "mpp11", "mpp19"; + marvell,function = "uart0"; + }; + }; + + ap_gpio: gpio@1040 { + compatible = "marvell,armada-8k-gpio"; + offset = <0x1040>; + ngpios = <20>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&ap_pinctrl 0 0 20>; + }; + }; + + ap_syscon1: system-controller@6f8000 { + compatible = "syscon", "simple-mfd"; + reg = <0x6f8000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + ap_thermal: thermal-sensor@80 { + compatible = "marvell,armada-ap806-thermal"; + reg = <0x80 0x10>; + interrupt-parent = <&sei>; + interrupts = <18>; + #thermal-sensor-cells = <1>; + }; + }; + }; + }; + + /* + * The thermal IP features one internal sensor plus, if applicable, one + * remote channel wired to one sensor per CPU. + * + * Only one thermal zone per AP/CP may trigger interrupts at a time, the + * first one that will have a critical trip point will be chosen. + */ + thermal-zones { + ap_thermal_ic: ap-thermal-ic { + polling-delay-passive = <0>; /* Interrupt driven */ + polling-delay = <0>; /* Interrupt driven */ + + thermal-sensors = <&ap_thermal 0>; + + trips { + ap_crit: ap-crit { + temperature = <100000>; /* mC degrees */ + hysteresis = <2000>; /* mC degrees */ + type = "critical"; + }; + }; + + cooling-maps { }; + }; + + ap_thermal_cpu0: ap-thermal-cpu0 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 1>; + + trips { + cpu0_hot: cpu0-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu0_emerg: cpu0-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map0_hot: map0-hot { + trip = <&cpu0_hot>; + cooling-device = <&cpu0 1 2>, + <&cpu1 1 2>; + }; + map0_emerg: map0-ermerg { + trip = <&cpu0_emerg>; + cooling-device = <&cpu0 3 3>, + <&cpu1 3 3>; + }; + }; + }; + + ap_thermal_cpu1: ap-thermal-cpu1 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 2>; + + trips { + cpu1_hot: cpu1-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu1_emerg: cpu1-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map1_hot: map1-hot { + trip = <&cpu1_hot>; + cooling-device = <&cpu0 1 2>, + <&cpu1 1 2>; + }; + map1_emerg: map1-emerg { + trip = <&cpu1_emerg>; + cooling-device = <&cpu0 3 3>, + <&cpu1 3 3>; + }; + }; + }; + + ap_thermal_cpu2: ap-thermal-cpu2 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 3>; + + trips { + cpu2_hot: cpu2-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu2_emerg: cpu2-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map2_hot: map2-hot { + trip = <&cpu2_hot>; + cooling-device = <&cpu2 1 2>, + <&cpu3 1 2>; + }; + map2_emerg: map2-emerg { + trip = <&cpu2_emerg>; + cooling-device = <&cpu2 3 3>, + <&cpu3 3 3>; + }; + }; + }; + + ap_thermal_cpu3: ap-thermal-cpu3 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 4>; + + trips { + cpu3_hot: cpu3-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu3_emerg: cpu3-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map3_hot: map3-bhot { + trip = <&cpu3_hot>; + cooling-device = <&cpu2 1 2>, + <&cpu3 1 2>; + }; + map3_emerg: map3-emerg { + trip = <&cpu3_emerg>; + cooling-device = <&cpu2 3 3>, + <&cpu3 3 3>; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-common.dtsi b/arch/arm64/boot/dts/marvell/armada-common.dtsi index b29c6405d214..c04c6c475022 100644 --- a/arch/arm64/boot/dts/marvell/armada-common.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-common.dtsi @@ -6,6 +6,6 @@ /* Common definitions used by Armada 7K/8K DTs */ #define PASTER(x, y) x ## y #define EVALUATOR(x, y) PASTER(x, y) -#define CP110_LABEL(name) EVALUATOR(CP110_NAME, EVALUATOR(_, name)) -#define CP110_NODE_NAME(name) EVALUATOR(CP110_NAME, EVALUATOR(-, name)) +#define CP11X_LABEL(name) EVALUATOR(CP11X_NAME, EVALUATOR(_, name)) +#define CP11X_NODE_NAME(name) EVALUATOR(CP11X_NAME, EVALUATOR(-, name)) #define ADDRESSIFY(addr) EVALUATOR(0x, addr) diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi index d81944902650..4fd33b0fa56e 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi @@ -1,579 +1,12 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * Copyright (C) 2016 Marvell Technology Group Ltd. + * Copyright (C) 2019 Marvell Technology Group Ltd. * * Device Tree file for Marvell Armada CP110. */ -#include <dt-bindings/interrupt-controller/mvebu-icu.h> -#include <dt-bindings/thermal/thermal.h> +#define CP11X_TYPE cp110 -#include "armada-common.dtsi" +#include "armada-cp11x.dtsi" -#define CP110_PCIEx_IO_BASE(iface) (CP110_PCIE_IO_BASE + (iface * 0x10000)) -#define CP110_PCIEx_MEM_BASE(iface) (CP110_PCIE_MEM_BASE + (iface * 0x1000000)) -#define CP110_PCIEx_CONF_BASE(iface) (CP110_PCIEx_MEM_BASE(iface) + 0xf00000) - -/ { - /* - * The contents of the node are defined below, in order to - * save one indentation level - */ - CP110_NAME: CP110_NAME { }; - - /* - * CPs only have one sensor in the thermal IC. - * - * The cooling maps are empty as there are no cooling devices. - */ - thermal-zones { - CP110_LABEL(thermal_ic): CP110_NODE_NAME(thermal-ic) { - polling-delay-passive = <0>; /* Interrupt driven */ - polling-delay = <0>; /* Interrupt driven */ - - thermal-sensors = <&CP110_LABEL(thermal) 0>; - - trips { - CP110_LABEL(crit): crit { - temperature = <100000>; /* mC degrees */ - hysteresis = <2000>; /* mC degrees */ - type = "critical"; - }; - }; - - cooling-maps { }; - }; - }; -}; - -&CP110_NAME { - #address-cells = <2>; - #size-cells = <2>; - compatible = "simple-bus"; - interrupt-parent = <&CP110_LABEL(icu_nsr)>; - ranges; - - config-space@CP110_BASE { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0x0 0x0 ADDRESSIFY(CP110_BASE) 0x2000000>; - - CP110_LABEL(ethernet): ethernet@0 { - compatible = "marvell,armada-7k-pp22"; - reg = <0x0 0x100000>, <0x129000 0xb000>; - clocks = <&CP110_LABEL(clk) 1 3>, <&CP110_LABEL(clk) 1 9>, - <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>, - <&CP110_LABEL(clk) 1 18>; - clock-names = "pp_clk", "gop_clk", - "mg_clk", "mg_core_clk", "axi_clk"; - marvell,system-controller = <&CP110_LABEL(syscon0)>; - status = "disabled"; - dma-coherent; - - CP110_LABEL(eth0): eth0 { - interrupts = <39 IRQ_TYPE_LEVEL_HIGH>, - <43 IRQ_TYPE_LEVEL_HIGH>, - <47 IRQ_TYPE_LEVEL_HIGH>, - <51 IRQ_TYPE_LEVEL_HIGH>, - <55 IRQ_TYPE_LEVEL_HIGH>, - <59 IRQ_TYPE_LEVEL_HIGH>, - <63 IRQ_TYPE_LEVEL_HIGH>, - <67 IRQ_TYPE_LEVEL_HIGH>, - <71 IRQ_TYPE_LEVEL_HIGH>, - <129 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hif0", "hif1", "hif2", - "hif3", "hif4", "hif5", "hif6", "hif7", - "hif8", "link"; - port-id = <0>; - gop-port-id = <0>; - status = "disabled"; - }; - - CP110_LABEL(eth1): eth1 { - interrupts = <40 IRQ_TYPE_LEVEL_HIGH>, - <44 IRQ_TYPE_LEVEL_HIGH>, - <48 IRQ_TYPE_LEVEL_HIGH>, - <52 IRQ_TYPE_LEVEL_HIGH>, - <56 IRQ_TYPE_LEVEL_HIGH>, - <60 IRQ_TYPE_LEVEL_HIGH>, - <64 IRQ_TYPE_LEVEL_HIGH>, - <68 IRQ_TYPE_LEVEL_HIGH>, - <72 IRQ_TYPE_LEVEL_HIGH>, - <128 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hif0", "hif1", "hif2", - "hif3", "hif4", "hif5", "hif6", "hif7", - "hif8", "link"; - port-id = <1>; - gop-port-id = <2>; - status = "disabled"; - }; - - CP110_LABEL(eth2): eth2 { - interrupts = <41 IRQ_TYPE_LEVEL_HIGH>, - <45 IRQ_TYPE_LEVEL_HIGH>, - <49 IRQ_TYPE_LEVEL_HIGH>, - <53 IRQ_TYPE_LEVEL_HIGH>, - <57 IRQ_TYPE_LEVEL_HIGH>, - <61 IRQ_TYPE_LEVEL_HIGH>, - <65 IRQ_TYPE_LEVEL_HIGH>, - <69 IRQ_TYPE_LEVEL_HIGH>, - <73 IRQ_TYPE_LEVEL_HIGH>, - <127 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hif0", "hif1", "hif2", - "hif3", "hif4", "hif5", "hif6", "hif7", - "hif8", "link"; - port-id = <2>; - gop-port-id = <3>; - status = "disabled"; - }; - }; - - CP110_LABEL(comphy): phy@120000 { - compatible = "marvell,comphy-cp110"; - reg = <0x120000 0x6000>; - marvell,system-controller = <&CP110_LABEL(syscon0)>; - clocks = <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>, - <&CP110_LABEL(clk) 1 18>; - clock-names = "mg_clk", "mg_core_clk", "axi_clk"; - #address-cells = <1>; - #size-cells = <0>; - - CP110_LABEL(comphy0): phy@0 { - reg = <0>; - #phy-cells = <1>; - }; - - CP110_LABEL(comphy1): phy@1 { - reg = <1>; - #phy-cells = <1>; - }; - - CP110_LABEL(comphy2): phy@2 { - reg = <2>; - #phy-cells = <1>; - }; - - CP110_LABEL(comphy3): phy@3 { - reg = <3>; - #phy-cells = <1>; - }; - - CP110_LABEL(comphy4): phy@4 { - reg = <4>; - #phy-cells = <1>; - }; - - CP110_LABEL(comphy5): phy@5 { - reg = <5>; - #phy-cells = <1>; - }; - }; - - CP110_LABEL(mdio): mdio@12a200 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,orion-mdio"; - reg = <0x12a200 0x10>; - clocks = <&CP110_LABEL(clk) 1 9>, <&CP110_LABEL(clk) 1 5>, - <&CP110_LABEL(clk) 1 6>, <&CP110_LABEL(clk) 1 18>; - status = "disabled"; - }; - - CP110_LABEL(xmdio): mdio@12a600 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,xmdio"; - reg = <0x12a600 0x10>; - clocks = <&CP110_LABEL(clk) 1 5>, - <&CP110_LABEL(clk) 1 6>, <&CP110_LABEL(clk) 1 18>; - status = "disabled"; - }; - - CP110_LABEL(icu): interrupt-controller@1e0000 { - compatible = "marvell,cp110-icu"; - reg = <0x1e0000 0x440>; - #address-cells = <1>; - #size-cells = <1>; - - CP110_LABEL(icu_nsr): interrupt-controller@10 { - compatible = "marvell,cp110-icu-nsr"; - reg = <0x10 0x20>; - #interrupt-cells = <2>; - interrupt-controller; - msi-parent = <&gicp>; - }; - - CP110_LABEL(icu_sei): interrupt-controller@50 { - compatible = "marvell,cp110-icu-sei"; - reg = <0x50 0x10>; - #interrupt-cells = <2>; - interrupt-controller; - msi-parent = <&sei>; - }; - }; - - CP110_LABEL(rtc): rtc@284000 { - compatible = "marvell,armada-8k-rtc"; - reg = <0x284000 0x20>, <0x284080 0x24>; - reg-names = "rtc", "rtc-soc"; - interrupts = <77 IRQ_TYPE_LEVEL_HIGH>; - }; - - CP110_LABEL(syscon0): system-controller@440000 { - compatible = "syscon", "simple-mfd"; - reg = <0x440000 0x2000>; - - CP110_LABEL(clk): clock { - compatible = "marvell,cp110-clock"; - #clock-cells = <2>; - }; - - CP110_LABEL(gpio1): gpio@100 { - compatible = "marvell,armada-8k-gpio"; - offset = <0x100>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>; - interrupt-controller; - interrupts = <86 IRQ_TYPE_LEVEL_HIGH>, - <85 IRQ_TYPE_LEVEL_HIGH>, - <84 IRQ_TYPE_LEVEL_HIGH>, - <83 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <2>; - status = "disabled"; - }; - - CP110_LABEL(gpio2): gpio@140 { - compatible = "marvell,armada-8k-gpio"; - offset = <0x140>; - ngpios = <31>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&CP110_LABEL(pinctrl) 0 32 31>; - interrupt-controller; - interrupts = <82 IRQ_TYPE_LEVEL_HIGH>, - <81 IRQ_TYPE_LEVEL_HIGH>, - <80 IRQ_TYPE_LEVEL_HIGH>, - <79 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <2>; - status = "disabled"; - }; - }; - - CP110_LABEL(syscon1): system-controller@400000 { - compatible = "syscon", "simple-mfd"; - reg = <0x400000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - - CP110_LABEL(thermal): thermal-sensor@70 { - compatible = "marvell,armada-cp110-thermal"; - reg = <0x70 0x10>; - interrupts-extended = - <&CP110_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>; - #thermal-sensor-cells = <1>; - }; - }; - - CP110_LABEL(usb3_0): usb3@500000 { - compatible = "marvell,armada-8k-xhci", - "generic-xhci"; - reg = <0x500000 0x4000>; - dma-coherent; - interrupts = <106 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 22>, - <&CP110_LABEL(clk) 1 16>; - status = "disabled"; - }; - - CP110_LABEL(usb3_1): usb3@510000 { - compatible = "marvell,armada-8k-xhci", - "generic-xhci"; - reg = <0x510000 0x4000>; - dma-coherent; - interrupts = <105 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 23>, - <&CP110_LABEL(clk) 1 16>; - status = "disabled"; - }; - - CP110_LABEL(sata0): sata@540000 { - compatible = "marvell,armada-8k-ahci", - "generic-ahci"; - reg = <0x540000 0x30000>; - dma-coherent; - interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CP110_LABEL(clk) 1 15>, - <&CP110_LABEL(clk) 1 16>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata-port@0 { - reg = <0>; - }; - - sata-port@1 { - reg = <1>; - }; - }; - - CP110_LABEL(xor0): xor@6a0000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>; - dma-coherent; - msi-parent = <&gic_v2m0>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 8>, - <&CP110_LABEL(clk) 1 14>; - }; - - CP110_LABEL(xor1): xor@6c0000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>; - dma-coherent; - msi-parent = <&gic_v2m0>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 7>, - <&CP110_LABEL(clk) 1 14>; - }; - - CP110_LABEL(spi0): spi@700600 { - compatible = "marvell,armada-380-spi"; - reg = <0x700600 0x50>; - #address-cells = <0x1>; - #size-cells = <0x0>; - clock-names = "core", "axi"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(spi1): spi@700680 { - compatible = "marvell,armada-380-spi"; - reg = <0x700680 0x50>; - #address-cells = <1>; - #size-cells = <0>; - clock-names = "core", "axi"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(i2c0): i2c@701000 { - compatible = "marvell,mv78230-i2c"; - reg = <0x701000 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <120 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(i2c1): i2c@701100 { - compatible = "marvell,mv78230-i2c"; - reg = <0x701100 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <121 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(uart0): serial@702000 { - compatible = "snps,dw-apb-uart"; - reg = <0x702000 0x100>; - reg-shift = <2>; - interrupts = <122 IRQ_TYPE_LEVEL_HIGH>; - reg-io-width = <1>; - clock-names = "baudclk", "apb_pclk"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(uart1): serial@702100 { - compatible = "snps,dw-apb-uart"; - reg = <0x702100 0x100>; - reg-shift = <2>; - interrupts = <123 IRQ_TYPE_LEVEL_HIGH>; - reg-io-width = <1>; - clock-names = "baudclk", "apb_pclk"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(uart2): serial@702200 { - compatible = "snps,dw-apb-uart"; - reg = <0x702200 0x100>; - reg-shift = <2>; - interrupts = <124 IRQ_TYPE_LEVEL_HIGH>; - reg-io-width = <1>; - clock-names = "baudclk", "apb_pclk"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(uart3): serial@702300 { - compatible = "snps,dw-apb-uart"; - reg = <0x702300 0x100>; - reg-shift = <2>; - interrupts = <125 IRQ_TYPE_LEVEL_HIGH>; - reg-io-width = <1>; - clock-names = "baudclk", "apb_pclk"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(nand_controller): nand@720000 { - /* - * Due to the limitation of the pins available - * this controller is only usable on the CPM - * for A7K and on the CPS for A8K. - */ - compatible = "marvell,armada-8k-nand-controller", - "marvell,armada370-nand-controller"; - reg = <0x720000 0x54>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <115 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 2>, - <&CP110_LABEL(clk) 1 17>; - marvell,system-controller = <&CP110_LABEL(syscon0)>; - status = "disabled"; - }; - - CP110_LABEL(trng): trng@760000 { - compatible = "marvell,armada-8k-rng", - "inside-secure,safexcel-eip76"; - reg = <0x760000 0x7d>; - interrupts = <95 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 25>, - <&CP110_LABEL(clk) 1 17>; - status = "okay"; - }; - - CP110_LABEL(sdhci0): sdhci@780000 { - compatible = "marvell,armada-cp110-sdhci"; - reg = <0x780000 0x300>; - interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "axi"; - clocks = <&CP110_LABEL(clk) 1 4>, <&CP110_LABEL(clk) 1 18>; - dma-coherent; - status = "disabled"; - }; - - CP110_LABEL(crypto): crypto@800000 { - compatible = "inside-secure,safexcel-eip197b"; - reg = <0x800000 0x200000>; - interrupts = <87 IRQ_TYPE_LEVEL_HIGH>, - <88 IRQ_TYPE_LEVEL_HIGH>, - <89 IRQ_TYPE_LEVEL_HIGH>, - <90 IRQ_TYPE_LEVEL_HIGH>, - <91 IRQ_TYPE_LEVEL_HIGH>, - <92 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "mem", "ring0", "ring1", - "ring2", "ring3", "eip"; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 26>, - <&CP110_LABEL(clk) 1 17>; - dma-coherent; - }; - }; - - CP110_LABEL(pcie0): pcie@CP110_PCIE0_BASE { - compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; - reg = <0 ADDRESSIFY(CP110_PCIE0_BASE) 0 0x10000>, - <0 CP110_PCIEx_CONF_BASE(0) 0 0x80000>; - reg-names = "ctrl", "config"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - dma-coherent; - msi-parent = <&gic_v2m0>; - - bus-range = <0 0xff>; - ranges = - /* downstream I/O */ - <0x81000000 0 CP110_PCIEx_IO_BASE(0) 0 CP110_PCIEx_IO_BASE(0) 0 0x10000 - /* non-prefetchable memory */ - 0x82000000 0 CP110_PCIEx_MEM_BASE(0) 0 CP110_PCIEx_MEM_BASE(0) 0 0xf00000>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; - num-lanes = <1>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 13>, <&CP110_LABEL(clk) 1 14>; - status = "disabled"; - }; - - CP110_LABEL(pcie1): pcie@CP110_PCIE1_BASE { - compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; - reg = <0 ADDRESSIFY(CP110_PCIE1_BASE) 0 0x10000>, - <0 CP110_PCIEx_CONF_BASE(1) 0 0x80000>; - reg-names = "ctrl", "config"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - dma-coherent; - msi-parent = <&gic_v2m0>; - - bus-range = <0 0xff>; - ranges = - /* downstream I/O */ - <0x81000000 0 CP110_PCIEx_IO_BASE(1) 0 CP110_PCIEx_IO_BASE(1) 0 0x10000 - /* non-prefetchable memory */ - 0x82000000 0 CP110_PCIEx_MEM_BASE(1) 0 CP110_PCIEx_MEM_BASE(1) 0 0xf00000>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; - - num-lanes = <1>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 11>, <&CP110_LABEL(clk) 1 14>; - status = "disabled"; - }; - - CP110_LABEL(pcie2): pcie@CP110_PCIE2_BASE { - compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; - reg = <0 ADDRESSIFY(CP110_PCIE2_BASE) 0 0x10000>, - <0 CP110_PCIEx_CONF_BASE(2) 0 0x80000>; - reg-names = "ctrl", "config"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - dma-coherent; - msi-parent = <&gic_v2m0>; - - bus-range = <0 0xff>; - ranges = - /* downstream I/O */ - <0x81000000 0 CP110_PCIEx_IO_BASE(2) 0 CP110_PCIEx_IO_BASE(2) 0 0x10000 - /* non-prefetchable memory */ - 0x82000000 0 CP110_PCIEx_MEM_BASE(2) 0 CP110_PCIEx_MEM_BASE(2) 0 0xf00000>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; - - num-lanes = <1>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 12>, <&CP110_LABEL(clk) 1 14>; - status = "disabled"; - }; -}; +#undef CP11X_TYPE diff --git a/arch/arm64/boot/dts/marvell/armada-cp115.dtsi b/arch/arm64/boot/dts/marvell/armada-cp115.dtsi new file mode 100644 index 000000000000..1d0a9653e681 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-cp115.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell Technology Group Ltd. + * + * Device Tree file for Marvell Armada CP115. + */ + +#define CP11X_TYPE cp115 + +#include "armada-cp11x.dtsi" + +#undef CP11X_TYPE diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi new file mode 100644 index 000000000000..9dcf16beabf5 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi @@ -0,0 +1,568 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * + * Device Tree file for Marvell Armada CP11x. + */ + +#include <dt-bindings/interrupt-controller/mvebu-icu.h> +#include <dt-bindings/thermal/thermal.h> + +#include "armada-common.dtsi" + +#define CP11X_PCIEx_CONF_BASE(iface) (CP11X_PCIEx_MEM_BASE(iface) + CP11X_PCIEx_MEM_SIZE(iface)) + +/ { + /* + * The contents of the node are defined below, in order to + * save one indentation level + */ + CP11X_NAME: CP11X_NAME { }; + + /* + * CPs only have one sensor in the thermal IC. + * + * The cooling maps are empty as there are no cooling devices. + */ + thermal-zones { + CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(thermal-ic) { + polling-delay-passive = <0>; /* Interrupt driven */ + polling-delay = <0>; /* Interrupt driven */ + + thermal-sensors = <&CP11X_LABEL(thermal) 0>; + + trips { + CP11X_LABEL(crit): crit { + temperature = <100000>; /* mC degrees */ + hysteresis = <2000>; /* mC degrees */ + type = "critical"; + }; + }; + + cooling-maps { }; + }; + }; +}; + +&CP11X_NAME { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + interrupt-parent = <&CP11X_LABEL(icu_nsr)>; + ranges; + + config-space@CP11X_BASE { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x0 0x0 ADDRESSIFY(CP11X_BASE) 0x2000000>; + + CP11X_LABEL(ethernet): ethernet@0 { + compatible = "marvell,armada-7k-pp22"; + reg = <0x0 0x100000>, <0x129000 0xb000>; + clocks = <&CP11X_LABEL(clk) 1 3>, <&CP11X_LABEL(clk) 1 9>, + <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>, + <&CP11X_LABEL(clk) 1 18>; + clock-names = "pp_clk", "gop_clk", + "mg_clk", "mg_core_clk", "axi_clk"; + marvell,system-controller = <&CP11X_LABEL(syscon0)>; + status = "disabled"; + dma-coherent; + + CP11X_LABEL(eth0): eth0 { + interrupts = <39 IRQ_TYPE_LEVEL_HIGH>, + <43 IRQ_TYPE_LEVEL_HIGH>, + <47 IRQ_TYPE_LEVEL_HIGH>, + <51 IRQ_TYPE_LEVEL_HIGH>, + <55 IRQ_TYPE_LEVEL_HIGH>, + <59 IRQ_TYPE_LEVEL_HIGH>, + <63 IRQ_TYPE_LEVEL_HIGH>, + <67 IRQ_TYPE_LEVEL_HIGH>, + <71 IRQ_TYPE_LEVEL_HIGH>, + <129 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hif0", "hif1", "hif2", + "hif3", "hif4", "hif5", "hif6", "hif7", + "hif8", "link"; + port-id = <0>; + gop-port-id = <0>; + status = "disabled"; + }; + + CP11X_LABEL(eth1): eth1 { + interrupts = <40 IRQ_TYPE_LEVEL_HIGH>, + <44 IRQ_TYPE_LEVEL_HIGH>, + <48 IRQ_TYPE_LEVEL_HIGH>, + <52 IRQ_TYPE_LEVEL_HIGH>, + <56 IRQ_TYPE_LEVEL_HIGH>, + <60 IRQ_TYPE_LEVEL_HIGH>, + <64 IRQ_TYPE_LEVEL_HIGH>, + <68 IRQ_TYPE_LEVEL_HIGH>, + <72 IRQ_TYPE_LEVEL_HIGH>, + <128 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hif0", "hif1", "hif2", + "hif3", "hif4", "hif5", "hif6", "hif7", + "hif8", "link"; + port-id = <1>; + gop-port-id = <2>; + status = "disabled"; + }; + + CP11X_LABEL(eth2): eth2 { + interrupts = <41 IRQ_TYPE_LEVEL_HIGH>, + <45 IRQ_TYPE_LEVEL_HIGH>, + <49 IRQ_TYPE_LEVEL_HIGH>, + <53 IRQ_TYPE_LEVEL_HIGH>, + <57 IRQ_TYPE_LEVEL_HIGH>, + <61 IRQ_TYPE_LEVEL_HIGH>, + <65 IRQ_TYPE_LEVEL_HIGH>, + <69 IRQ_TYPE_LEVEL_HIGH>, + <73 IRQ_TYPE_LEVEL_HIGH>, + <127 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hif0", "hif1", "hif2", + "hif3", "hif4", "hif5", "hif6", "hif7", + "hif8", "link"; + port-id = <2>; + gop-port-id = <3>; + status = "disabled"; + }; + }; + + CP11X_LABEL(comphy): phy@120000 { + compatible = "marvell,comphy-cp110"; + reg = <0x120000 0x6000>; + marvell,system-controller = <&CP11X_LABEL(syscon0)>; + clocks = <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>, + <&CP11X_LABEL(clk) 1 18>; + clock-names = "mg_clk", "mg_core_clk", "axi_clk"; + #address-cells = <1>; + #size-cells = <0>; + + CP11X_LABEL(comphy0): phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + CP11X_LABEL(comphy1): phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + + CP11X_LABEL(comphy2): phy@2 { + reg = <2>; + #phy-cells = <1>; + }; + + CP11X_LABEL(comphy3): phy@3 { + reg = <3>; + #phy-cells = <1>; + }; + + CP11X_LABEL(comphy4): phy@4 { + reg = <4>; + #phy-cells = <1>; + }; + + CP11X_LABEL(comphy5): phy@5 { + reg = <5>; + #phy-cells = <1>; + }; + }; + + CP11X_LABEL(mdio): mdio@12a200 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,orion-mdio"; + reg = <0x12a200 0x10>; + clocks = <&CP11X_LABEL(clk) 1 9>, <&CP11X_LABEL(clk) 1 5>, + <&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>; + status = "disabled"; + }; + + CP11X_LABEL(xmdio): mdio@12a600 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,xmdio"; + reg = <0x12a600 0x10>; + clocks = <&CP11X_LABEL(clk) 1 5>, + <&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>; + status = "disabled"; + }; + + CP11X_LABEL(icu): interrupt-controller@1e0000 { + compatible = "marvell,cp110-icu"; + reg = <0x1e0000 0x440>; + #address-cells = <1>; + #size-cells = <1>; + + CP11X_LABEL(icu_nsr): interrupt-controller@10 { + compatible = "marvell,cp110-icu-nsr"; + reg = <0x10 0x20>; + #interrupt-cells = <2>; + interrupt-controller; + msi-parent = <&gicp>; + }; + + CP11X_LABEL(icu_sei): interrupt-controller@50 { + compatible = "marvell,cp110-icu-sei"; + reg = <0x50 0x10>; + #interrupt-cells = <2>; + interrupt-controller; + msi-parent = <&sei>; + }; + }; + + CP11X_LABEL(rtc): rtc@284000 { + compatible = "marvell,armada-8k-rtc"; + reg = <0x284000 0x20>, <0x284080 0x24>; + reg-names = "rtc", "rtc-soc"; + interrupts = <77 IRQ_TYPE_LEVEL_HIGH>; + }; + + CP11X_LABEL(syscon0): system-controller@440000 { + compatible = "syscon", "simple-mfd"; + reg = <0x440000 0x2000>; + + CP11X_LABEL(clk): clock { + compatible = "marvell,cp110-clock"; + #clock-cells = <2>; + }; + + CP11X_LABEL(gpio1): gpio@100 { + compatible = "marvell,armada-8k-gpio"; + offset = <0x100>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&CP11X_LABEL(pinctrl) 0 0 32>; + interrupt-controller; + interrupts = <86 IRQ_TYPE_LEVEL_HIGH>, + <85 IRQ_TYPE_LEVEL_HIGH>, + <84 IRQ_TYPE_LEVEL_HIGH>, + <83 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + status = "disabled"; + }; + + CP11X_LABEL(gpio2): gpio@140 { + compatible = "marvell,armada-8k-gpio"; + offset = <0x140>; + ngpios = <31>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&CP11X_LABEL(pinctrl) 0 32 31>; + interrupt-controller; + interrupts = <82 IRQ_TYPE_LEVEL_HIGH>, + <81 IRQ_TYPE_LEVEL_HIGH>, + <80 IRQ_TYPE_LEVEL_HIGH>, + <79 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + status = "disabled"; + }; + }; + + CP11X_LABEL(syscon1): system-controller@400000 { + compatible = "syscon", "simple-mfd"; + reg = <0x400000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + CP11X_LABEL(thermal): thermal-sensor@70 { + compatible = "marvell,armada-cp110-thermal"; + reg = <0x70 0x10>; + interrupts-extended = + <&CP11X_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>; + #thermal-sensor-cells = <1>; + }; + }; + + CP11X_LABEL(usb3_0): usb3@500000 { + compatible = "marvell,armada-8k-xhci", + "generic-xhci"; + reg = <0x500000 0x4000>; + dma-coherent; + interrupts = <106 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 22>, + <&CP11X_LABEL(clk) 1 16>; + status = "disabled"; + }; + + CP11X_LABEL(usb3_1): usb3@510000 { + compatible = "marvell,armada-8k-xhci", + "generic-xhci"; + reg = <0x510000 0x4000>; + dma-coherent; + interrupts = <105 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 23>, + <&CP11X_LABEL(clk) 1 16>; + status = "disabled"; + }; + + CP11X_LABEL(sata0): sata@540000 { + compatible = "marvell,armada-8k-ahci", + "generic-ahci"; + reg = <0x540000 0x30000>; + dma-coherent; + interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CP11X_LABEL(clk) 1 15>, + <&CP11X_LABEL(clk) 1 16>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata-port@0 { + reg = <0>; + }; + + sata-port@1 { + reg = <1>; + }; + }; + + CP11X_LABEL(xor0): xor@6a0000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>; + dma-coherent; + msi-parent = <&gic_v2m0>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 8>, + <&CP11X_LABEL(clk) 1 14>; + }; + + CP11X_LABEL(xor1): xor@6c0000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>; + dma-coherent; + msi-parent = <&gic_v2m0>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 7>, + <&CP11X_LABEL(clk) 1 14>; + }; + + CP11X_LABEL(spi0): spi@700600 { + compatible = "marvell,armada-380-spi"; + reg = <0x700600 0x50>; + #address-cells = <0x1>; + #size-cells = <0x0>; + clock-names = "core", "axi"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(spi1): spi@700680 { + compatible = "marvell,armada-380-spi"; + reg = <0x700680 0x50>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "core", "axi"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(i2c0): i2c@701000 { + compatible = "marvell,mv78230-i2c"; + reg = <0x701000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <120 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(i2c1): i2c@701100 { + compatible = "marvell,mv78230-i2c"; + reg = <0x701100 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <121 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(uart0): serial@702000 { + compatible = "snps,dw-apb-uart"; + reg = <0x702000 0x100>; + reg-shift = <2>; + interrupts = <122 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(uart1): serial@702100 { + compatible = "snps,dw-apb-uart"; + reg = <0x702100 0x100>; + reg-shift = <2>; + interrupts = <123 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(uart2): serial@702200 { + compatible = "snps,dw-apb-uart"; + reg = <0x702200 0x100>; + reg-shift = <2>; + interrupts = <124 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(uart3): serial@702300 { + compatible = "snps,dw-apb-uart"; + reg = <0x702300 0x100>; + reg-shift = <2>; + interrupts = <125 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(nand_controller): nand@720000 { + /* + * Due to the limitation of the pins available + * this controller is only usable on the CPM + * for A7K and on the CPS for A8K. + */ + compatible = "marvell,armada-8k-nand-controller", + "marvell,armada370-nand-controller"; + reg = <0x720000 0x54>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <115 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 2>, + <&CP11X_LABEL(clk) 1 17>; + marvell,system-controller = <&CP11X_LABEL(syscon0)>; + status = "disabled"; + }; + + CP11X_LABEL(trng): trng@760000 { + compatible = "marvell,armada-8k-rng", + "inside-secure,safexcel-eip76"; + reg = <0x760000 0x7d>; + interrupts = <95 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 25>, + <&CP11X_LABEL(clk) 1 17>; + status = "okay"; + }; + + CP11X_LABEL(sdhci0): sdhci@780000 { + compatible = "marvell,armada-cp110-sdhci"; + reg = <0x780000 0x300>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "axi"; + clocks = <&CP11X_LABEL(clk) 1 4>, <&CP11X_LABEL(clk) 1 18>; + dma-coherent; + status = "disabled"; + }; + + CP11X_LABEL(crypto): crypto@800000 { + compatible = "inside-secure,safexcel-eip197b"; + reg = <0x800000 0x200000>; + interrupts = <87 IRQ_TYPE_LEVEL_HIGH>, + <88 IRQ_TYPE_LEVEL_HIGH>, + <89 IRQ_TYPE_LEVEL_HIGH>, + <90 IRQ_TYPE_LEVEL_HIGH>, + <91 IRQ_TYPE_LEVEL_HIGH>, + <92 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mem", "ring0", "ring1", + "ring2", "ring3", "eip"; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 26>, + <&CP11X_LABEL(clk) 1 17>; + dma-coherent; + }; + }; + + CP11X_LABEL(pcie0): pcie@CP11X_PCIE0_BASE { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 ADDRESSIFY(CP11X_PCIE0_BASE) 0 0x10000>, + <0 CP11X_PCIEx_CONF_BASE(0) 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + msi-parent = <&gic_v2m0>; + + bus-range = <0 0xff>; + /* non-prefetchable memory */ + ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_SIZE(0)>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; + num-lanes = <1>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 13>, <&CP11X_LABEL(clk) 1 14>; + status = "disabled"; + }; + + CP11X_LABEL(pcie1): pcie@CP11X_PCIE1_BASE { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 ADDRESSIFY(CP11X_PCIE1_BASE) 0 0x10000>, + <0 CP11X_PCIEx_CONF_BASE(1) 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + msi-parent = <&gic_v2m0>; + + bus-range = <0 0xff>; + /* non-prefetchable memory */ + ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_SIZE(1)>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; + + num-lanes = <1>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 11>, <&CP11X_LABEL(clk) 1 14>; + status = "disabled"; + }; + + CP11X_LABEL(pcie2): pcie@CP11X_PCIE2_BASE { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 ADDRESSIFY(CP11X_PCIE2_BASE) 0 0x10000>, + <0 CP11X_PCIEx_CONF_BASE(2) 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + msi-parent = <&gic_v2m0>; + + bus-range = <0 0xff>; + /* non-prefetchable memory */ + ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_SIZE(2)>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; + + num-lanes = <1>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 12>, <&CP11X_LABEL(clk) 1 14>; + status = "disabled"; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dts b/arch/arm64/boot/dts/marvell/cn9130-db.dts new file mode 100644 index 000000000000..ce49a70d88a0 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9130-db.dts @@ -0,0 +1,403 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * Device tree for the CN9130-DB board. + */ + +#include "cn9130.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Marvell Armada CN9130-DB"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + gpio1 = &cp0_gpio1; + gpio2 = &cp0_gpio2; + i2c0 = &cp0_i2c0; + ethernet0 = &cp0_eth0; + ethernet1 = &cp0_eth1; + ethernet2 = &cp0_eth2; + spi1 = &cp0_spi0; + spi2 = &cp0_spi1; + }; + + memory@00000000 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + ap0_reg_sd_vccq: ap0_sd_vccq@0 { + compatible = "regulator-gpio"; + regulator-name = "ap0_sd_vccq"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&expander0 8 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 3300000 0x0>; + }; + + cp0_reg_usb3_vbus0: cp0_usb3_vbus@0 { + compatible = "regulator-fixed"; + regulator-name = "cp0-xhci0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&expander0 0 GPIO_ACTIVE_HIGH>; + }; + + cp0_usb3_0_phy0: cp0_usb3_phy@0 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp0_reg_usb3_vbus0>; + }; + + cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 { + compatible = "regulator-fixed"; + regulator-name = "cp0-xhci1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&expander0 1 GPIO_ACTIVE_HIGH>; + }; + + cp0_usb3_0_phy1: cp0_usb3_phy@1 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp0_reg_usb3_vbus1>; + }; + + cp0_reg_sd_vccq: cp0_sd_vccq@0 { + compatible = "regulator-gpio"; + regulator-name = "cp0_sd_vccq"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&expander0 15 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 + 3300000 0x0>; + }; + + cp0_reg_sd_vcc: cp0_sd_vcc@0 { + compatible = "regulator-fixed"; + regulator-name = "cp0_sd_vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&expander0 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + cp0_sfp_eth0: sfp-eth@0 { + compatible = "sff,sfp"; + i2c-bus = <&cp0_sfpp0_i2c>; + los-gpio = <&cp0_module_expander1 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp0_module_expander1 10 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp0_module_expander1 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp0_module_expander1 8 GPIO_ACTIVE_HIGH>; + /* + * SFP cages are unconnected on early PCBs because of an the I2C + * lanes not being connected. Prevent the port for being + * unusable by disabling the SFP node. + */ + status = "disabled"; + }; +}; + +&uart0 { + status = "okay"; +}; + +/* on-board eMMC - U9 */ +&ap_sdhci0 { + pinctrl-names = "default"; + bus-width = <8>; + vqmmc-supply = <&ap0_reg_sd_vccq>; + status = "okay"; +}; + +&cp0_crypto { + status = "disabled"; +}; + +&cp0_ethernet { + status = "okay"; +}; + +/* SLM-1521-V2, CON9 */ +&cp0_eth0 { + status = "disabled"; + phy-mode = "10gbase-kr"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy4 0>; + managed = "in-band-status"; + sfp = <&cp0_sfp_eth0>; +}; + +/* CON56 */ +&cp0_eth1 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; +}; + +/* CON57 */ +&cp0_eth2 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; +}; + +&cp0_gpio1 { + status = "okay"; +}; + +&cp0_gpio2 { + status = "okay"; +}; + +&cp0_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c0_pins>; + clock-frequency = <100000>; + + /* U36 */ + expander0: pca953x@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x21>; + status = "okay"; + }; + + /* U42 */ + eeprom0: eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <0x20>; + }; + + /* U38 */ + eeprom1: eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + pagesize = <0x20>; + }; +}; + +&cp0_i2c1 { + status = "okay"; + clock-frequency = <100000>; + + /* SLM-1521-V2 - U3 */ + i2c-mux@72 { /* verify address - depends on dpr */ + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + cp0_sfpp0_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* U12 */ + cp0_module_expander1: pca9555@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x21>; + }; + + }; + }; +}; + +&cp0_mdio { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +/* U54 */ +&cp0_nand_controller { + pinctrl-names = "default"; + pinctrl-0 = <&nand_pins &nand_rb>; + + nand@0 { + reg = <0>; + label = "main-storage"; + nand-rb = <0>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x200000>; + }; + partition@200000 { + label = "Linux"; + reg = <0x200000 0xd00000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; + }; + }; +}; + +/* SLM-1521-V2, CON6 */ +&cp0_pcie0 { + status = "okay"; + num-lanes = <4>; + num-viewport = <8>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy0 0 + &cp0_comphy1 0 + &cp0_comphy2 0 + &cp0_comphy3 0>; +}; + +&cp0_sata0 { + status = "okay"; + + /* SLM-1521-V2, CON2 */ + sata-port@1 { + status = "okay"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy5 1>; + }; +}; + +/* CON 28 */ +&cp0_sdhci0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sdhci_pins + &cp0_sdhci_cd_pins>; + bus-width = <4>; + cd-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>; + no-1-8-v; + vqmmc-supply = <&cp0_reg_sd_vccq>; + vmmc-supply = <&cp0_reg_sd_vcc>; +}; + +/* U55 */ +&cp0_spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_spi0_pins>; + reg = <0x700680 0x50>; + + spi-flash@0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + /* On-board MUX does not allow higher frequencies */ + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot-0"; + reg = <0x0 0x200000>; + }; + + partition@400000 { + label = "Filesystem-0"; + reg = <0x200000 0xe00000>; + }; + }; + }; +}; + +&cp0_syscon0 { + cp0_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp0_i2c0_pins: cp0-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp0_i2c1_pins: cp0-i2c-pins-1 { + marvell,pins = "mpp35", "mpp36"; + marvell,function = "i2c1"; + }; + cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 { + marvell,pins = "mpp0", "mpp1", "mpp2", + "mpp3", "mpp4", "mpp5", + "mpp6", "mpp7", "mpp8", + "mpp9", "mpp10", "mpp11"; + marvell,function = "ge0"; + }; + cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 { + marvell,pins = "mpp44", "mpp45", "mpp46", + "mpp47", "mpp48", "mpp49", + "mpp50", "mpp51", "mpp52", + "mpp53", "mpp54", "mpp55"; + marvell,function = "ge1"; + }; + cp0_sdhci_cd_pins: cp0-sdhci-cd-pins-0 { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + cp0_sdhci_pins: cp0-sdhi-pins-0 { + marvell,pins = "mpp56", "mpp57", "mpp58", + "mpp59", "mpp60", "mpp61"; + marvell,function = "sdio"; + }; + cp0_spi0_pins: cp0-spi-pins-0 { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + nand_pins: nand-pins { + marvell,pins = "mpp15", "mpp16", "mpp17", "mpp18", + "mpp19", "mpp20", "mpp21", "mpp22", + "mpp23", "mpp24", "mpp25", "mpp26", + "mpp27"; + marvell,function = "dev"; + }; + nand_rb: nand-rb { + marvell,pins = "mpp13"; + marvell,function = "nf"; + }; + }; +}; + +&cp0_usb3_0 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy0>; + phy-names = "usb"; +}; + +&cp0_usb3_1 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy1>; + phy-names = "usb"; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9130.dtsi b/arch/arm64/boot/dts/marvell/cn9130.dtsi new file mode 100644 index 000000000000..a2b7e5ec979d --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9130.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * Device tree for the CN9130 SoC. + */ + +#include "armada-ap807-quad.dtsi" + +/ { + model = "Marvell Armada CN9130 SoC"; + compatible = "marvell,cn9130", "marvell,armada-ap807-quad", + "marvell,armada-ap807"; +}; + +/* + * Instantiate the internal CP115 + */ + +#define CP11X_NAME cp0 +#define CP11X_BASE f2000000 +#define CP11X_PCIEx_MEM_BASE(iface) ((iface == 0) ? 0xc0000000 : \ + 0xe0000000 + ((iface - 1) * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) ((iface == 0) ? 0x1ff00000 : 0xf00000) +#define CP11X_PCIE0_BASE f2600000 +#define CP11X_PCIE1_BASE f2620000 +#define CP11X_PCIE2_BASE f2640000 + +#include "armada-cp115.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE diff --git a/arch/arm64/boot/dts/marvell/cn9131-db.dts b/arch/arm64/boot/dts/marvell/cn9131-db.dts new file mode 100644 index 000000000000..3c975f98b2a3 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9131-db.dts @@ -0,0 +1,202 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * Device tree for the CN9131-DB board. + */ + +#include "cn9130-db.dts" + +/ { + model = "Marvell Armada CN9131-DB"; + compatible = "marvell,cn9131", "marvell,cn9130", + "marvell,armada-ap807-quad", "marvell,armada-ap807"; + + aliases { + gpio3 = &cp1_gpio1; + gpio4 = &cp1_gpio2; + ethernet3 = &cp1_eth0; + ethernet4 = &cp1_eth1; + }; + + cp1_reg_usb3_vbus0: cp1_usb3_vbus@0 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_xhci0_vbus_pins>; + regulator-name = "cp1-xhci0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&cp1_gpio1 3 GPIO_ACTIVE_HIGH>; + }; + + cp1_usb3_0_phy0: cp1_usb3_phy0 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp1_reg_usb3_vbus0>; + }; + + cp1_sfp_eth1: sfp-eth1 { + compatible = "sff,sfp"; + i2c-bus = <&cp1_i2c0>; + los-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp1_gpio1 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_sfp_pins>; + /* + * SFP cages are unconnected on early PCBs because of an the I2C + * lanes not being connected. Prevent the port for being + * unusable by disabling the SFP node. + */ + status = "disabled"; + }; +}; + +/* + * Instantiate the first slave CP115 + */ + +#define CP11X_NAME cp1 +#define CP11X_BASE f4000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f4600000 +#define CP11X_PCIE1_BASE f4620000 +#define CP11X_PCIE2_BASE f4640000 + +#include "armada-cp115.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE + +&cp1_crypto { + status = "disabled"; +}; + +&cp1_ethernet { + status = "okay"; +}; + +/* CON50 */ +&cp1_eth0 { + status = "disabled"; + phy-mode = "10gbase-kr"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy4 0>; + managed = "in-band-status"; + sfp = <&cp1_sfp_eth1>; +}; + +&cp1_gpio1 { + status = "okay"; +}; + +&cp1_gpio2 { + status = "okay"; +}; + +&cp1_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_i2c0_pins>; + clock-frequency = <100000>; +}; + +/* CON40 */ +&cp1_pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp1_pcie_reset_pins>; + num-lanes = <2>; + num-viewport = <8>; + marvell,reset-gpio = <&cp1_gpio1 0 GPIO_ACTIVE_HIGH>; + status = "okay"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy0 0 + &cp1_comphy1 0>; +}; + +&cp1_sata0 { + status = "okay"; + + /* CON32 */ + sata-port@1 { + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy5 1>; + }; +}; + +/* U24 */ +&cp1_spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_spi0_pins>; + reg = <0x700680 0x50>; + + spi-flash@0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + /* On-board MUX does not allow higher frequencies */ + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot-1"; + reg = <0x0 0x200000>; + }; + + partition@400000 { + label = "Filesystem-1"; + reg = <0x200000 0xe00000>; + }; + }; + }; + +}; + +&cp1_syscon0 { + cp1_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp1_i2c0_pins: cp1-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp1_spi0_pins: cp1-spi-pins-0 { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + cp1_sfp_pins: sfp-pins { + marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11"; + marvell,function = "gpio"; + }; + cp1_pcie_reset_pins: cp1-pcie-reset-pins { + marvell,pins = "mpp0"; + marvell,function = "gpio"; + }; + }; +}; + +/* CON58 */ +&cp1_usb3_1 { + status = "okay"; + usb-phy = <&cp1_usb3_0_phy0>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy3 1>; + phy-names = "usb"; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9132-db.dts b/arch/arm64/boot/dts/marvell/cn9132-db.dts new file mode 100644 index 000000000000..4ef0df3097ca --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9132-db.dts @@ -0,0 +1,221 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * Device tree for the CN9132-DB board. + */ + +#include "cn9131-db.dts" + +/ { + model = "Marvell Armada CN9132-DB"; + compatible = "marvell,cn9132", "marvell,cn9131", "marvell,cn9130", + "marvell,armada-ap807-quad", "marvell,armada-ap807"; + + aliases { + gpio5 = &cp2_gpio1; + gpio6 = &cp2_gpio2; + ethernet5 = &cp2_eth0; + }; + + cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 { + compatible = "regulator-fixed"; + regulator-name = "cp2-xhci0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>; + }; + + cp2_usb3_0_phy0: cp2_usb3_phy0 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp2_reg_usb3_vbus0>; + }; + + cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 { + compatible = "regulator-fixed"; + regulator-name = "cp2-xhci1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>; + }; + + cp2_usb3_0_phy1: cp2_usb3_phy1 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp2_reg_usb3_vbus1>; + }; + + cp2_reg_sd_vccq: cp2_sd_vccq@0 { + compatible = "regulator-gpio"; + regulator-name = "cp2_sd_vcc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&cp2_gpio2 17 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 3300000 0x0>; + }; + + cp2_sfp_eth0: sfp-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&cp2_sfpp0_i2c>; + los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>; + /* + * SFP cages are unconnected on early PCBs because of an the I2C + * lanes not being connected. Prevent the port for being + * unusable by disabling the SFP node. + */ + status = "disabled"; + }; +}; + +/* + * Instantiate the second slave CP115 + */ + +#define CP11X_NAME cp2 +#define CP11X_BASE f6000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f6600000 +#define CP11X_PCIE1_BASE f6620000 +#define CP11X_PCIE2_BASE f6640000 + +#include "armada-cp115.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE + +&cp2_crypto { + status = "disabled"; +}; + +&cp2_ethernet { + status = "okay"; +}; + +/* SLM-1521-V2, CON9 */ +&cp2_eth0 { + status = "disabled"; + phy-mode = "10gbase-kr"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy4 0>; + managed = "in-band-status"; + sfp = <&cp2_sfp_eth0>; +}; + +&cp2_gpio1 { + status = "okay"; +}; + +&cp2_gpio2 { + status = "okay"; +}; + +&cp2_i2c0 { + clock-frequency = <100000>; + + /* SLM-1521-V2 - U3 */ + i2c-mux@72 { + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + cp2_sfpp0_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* U12 */ + cp2_module_expander1: pca9555@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x21>; + }; + }; + }; +}; + +/* SLM-1521-V2, CON6 */ +&cp2_pcie0 { + status = "okay"; + num-lanes = <2>; + num-viewport = <8>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy0 0 + &cp2_comphy1 0>; +}; + +/* SLM-1521-V2, CON8 */ +&cp2_pcie2 { + status = "okay"; + num-lanes = <1>; + num-viewport = <8>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy5 2>; +}; + +&cp2_sata0 { + status = "okay"; + + /* SLM-1521-V2, CON4 */ + sata-port@0 { + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy2 0>; + }; +}; + +/* CON 2 on SLM-1683 - microSD */ +&cp2_sdhci0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp2_sdhci_pins>; + bus-width = <4>; + cd-gpios = <&cp2_gpio2 23 GPIO_ACTIVE_LOW>; + vqmmc-supply = <&cp2_reg_sd_vccq>; +}; + +&cp2_syscon0 { + cp2_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp2_i2c0_pins: cp2-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp2_sdhci_pins: cp2-sdhi-pins-0 { + marvell,pins = "mpp56", "mpp57", "mpp58", + "mpp59", "mpp60", "mpp61"; + marvell,function = "sdio"; + }; + }; +}; + +&cp2_usb3_0 { + status = "okay"; + usb-phy = <&cp2_usb3_0_phy0>; + phy-names = "usb"; +}; + +/* SLM-1521-V2, CON11 */ +&cp2_usb3_1 { + status = "okay"; + usb-phy = <&cp2_usb3_0_phy1>; + phy-names = "usb"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy3 1>; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index bdace01561ba..f1de4ff6230a 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -115,7 +115,7 @@ }; padctl@3520000 { - status = "disabled"; + status = "okay"; avdd-pll-erefeut-supply = <&vdd_1v8_pll>; avdd-usb-supply = <&vdd_3v3_sys>; @@ -193,7 +193,7 @@ }; usb@3530000 { - status = "disabled"; + status = "okay"; phys = <&{/padctl@3520000/pads/usb2/lanes/usb2-0}>, <&{/padctl@3520000/pads/usb2/lanes/usb2-1}>, @@ -253,10 +253,14 @@ status = "disabled"; }; + /* DP on E3320 */ sor@15540000 { - status = "disabled"; + status = "okay"; + + avdd-io-hdmi-dp-supply = <&vdd_hdmi_1v05>; + vdd-hdmi-dp-pll = <&vdd_1v8_ap>; - nvidia,dpaux = <&dpaux1>; + nvidia,dpaux = <&dpaux>; }; sor@15580000 { diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 47cd831fcf44..7893d78a0fb6 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -525,6 +525,7 @@ <0x0 0x03538000 0x0 0x1000>; reg-names = "hcd", "fpci"; + iommus = <&smmu TEGRA186_SID_XUSB_HOST>; interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; @@ -1018,6 +1019,7 @@ reset-names = "vic"; power-domains = <&bpmp TEGRA186_POWER_DOMAIN_VIC>; + iommus = <&smmu TEGRA186_SID_VIC>; }; dsib: dsi@15400000 { @@ -1060,7 +1062,7 @@ }; sor1: sor@15580000 { - compatible = "nvidia,tegra186-sor1"; + compatible = "nvidia,tegra186-sor"; reg = <0x15580000 0x10000>; interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA186_CLK_SOR1>, diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi index 4c38426a6969..c7f2a20e6b02 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi @@ -8,17 +8,18 @@ compatible = "nvidia,p2888", "nvidia,tegra194"; aliases { - sdhci0 = "/cbb/sdhci@3460000"; - sdhci1 = "/cbb/sdhci@3400000"; + ethernet0 = "/cbb@0/ethernet@2490000"; + sdhci0 = "/cbb@0/sdhci@3460000"; + sdhci1 = "/cbb@0/sdhci@3400000"; serial0 = &tcu; i2c0 = "/bpmp/i2c"; - i2c1 = "/cbb/i2c@3160000"; - i2c2 = "/cbb/i2c@c240000"; - i2c3 = "/cbb/i2c@3180000"; - i2c4 = "/cbb/i2c@3190000"; - i2c5 = "/cbb/i2c@31c0000"; - i2c6 = "/cbb/i2c@c250000"; - i2c7 = "/cbb/i2c@31e0000"; + i2c1 = "/cbb@0/i2c@3160000"; + i2c2 = "/cbb@0/i2c@c240000"; + i2c3 = "/cbb@0/i2c@3180000"; + i2c4 = "/cbb@0/i2c@3190000"; + i2c5 = "/cbb@0/i2c@31c0000"; + i2c6 = "/cbb@0/i2c@c250000"; + i2c7 = "/cbb@0/i2c@31e0000"; }; chosen { @@ -26,7 +27,7 @@ stdout-path = "serial0:115200n8"; }; - cbb { + cbb@0 { ethernet@2490000 { status = "okay"; @@ -168,7 +169,7 @@ in-ldo7-8-supply = <&vdd_1v8ls>; vdd_1v0: sd0 { - regulator-name = "VDD_1V0"; + regulator-name = "VDDIO_SYS_1V0"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; @@ -176,7 +177,7 @@ }; vdd_1v8hs: sd1 { - regulator-name = "VDD_1V8HS"; + regulator-name = "VDDIO_SYS_1V8HS"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; @@ -184,7 +185,7 @@ }; vdd_1v8ls: sd2 { - regulator-name = "VDD_1V8LS"; + regulator-name = "VDDIO_SYS_1V8LS"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; @@ -192,7 +193,7 @@ }; vdd_1v8ao: sd3 { - regulator-name = "VDD_1V8AO"; + regulator-name = "VDDIO_AO_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; @@ -216,7 +217,7 @@ }; ldo2 { - regulator-name = "VDD_AO_3V3"; + regulator-name = "VDDIO_AO_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; @@ -242,7 +243,7 @@ }; ldo7 { - regulator-name = "VDD_CSI_1V2"; + regulator-name = "AVDD_CSI_1V2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; @@ -309,9 +310,8 @@ regulator-name = "VDD_12V"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_LOW>; + gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_HIGH>; regulator-boot-on; - enable-active-low; }; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts index d47cd8c4dd24..353a6a22196d 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts @@ -10,8 +10,8 @@ model = "NVIDIA Jetson AGX Xavier Developer Kit"; compatible = "nvidia,p2972-0000", "nvidia,tegra194"; - cbb { - aconnect { + cbb@0 { + aconnect@2900000 { status = "okay"; dma-controller@2930000 { @@ -46,10 +46,39 @@ status = "okay"; }; + dpaux@155c0000 { + status = "okay"; + }; + + dpaux@155d0000 { + status = "okay"; + }; + dpaux@155e0000 { status = "okay"; }; + /* DP0 */ + sor@15b00000 { + status = "okay"; + + avdd-io-hdmi-dp-supply = <&vdd_1v0>; + vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>; + + nvidia,dpaux = <&dpaux0>; + }; + + /* DP1 */ + sor@15b40000 { + status = "okay"; + + avdd-io-hdmi-dp-supply = <&vdd_1v0>; + vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>; + + nvidia,dpaux = <&dpaux1>; + }; + + /* HDMI */ sor@15b80000 { status = "okay"; diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index 3c0cf54f0aab..11220d97adb8 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -15,7 +15,7 @@ #size-cells = <2>; /* control backbone */ - cbb { + cbb@0 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -39,7 +39,8 @@ }; ethernet@2490000 { - compatible = "nvidia,tegra186-eqos", + compatible = "nvidia,tegra194-eqos", + "nvidia,tegra186-eqos", "snps,dwc-qos-ethernet-4.10"; reg = <0x02490000 0x10000>; interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; @@ -60,7 +61,7 @@ snps,rxpbl = <8>; }; - aconnect { + aconnect@2900000 { compatible = "nvidia,tegra194-aconnect", "nvidia,tegra210-aconnect"; clocks = <&bpmp TEGRA194_CLK_APE>, @@ -1078,7 +1079,7 @@ sor1: sor@15b40000 { compatible = "nvidia,tegra194-sor"; - reg = <0x155c0000 0x40000>; + reg = <0x15b40000 0x40000>; interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_SOR1_REF>, <&bpmp TEGRA194_CLK_SOR1_OUT>, @@ -1185,7 +1186,6 @@ nvidia,bpmp = <&bpmp 1>; - supports-clkreq; nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; @@ -1231,7 +1231,6 @@ nvidia,bpmp = <&bpmp 2>; - supports-clkreq; nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; @@ -1277,7 +1276,6 @@ nvidia,bpmp = <&bpmp 3>; - supports-clkreq; nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; @@ -1323,7 +1321,6 @@ nvidia,bpmp = <&bpmp 4>; - supports-clkreq; nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; @@ -1369,7 +1366,6 @@ nvidia,bpmp = <&bpmp 0>; - supports-clkreq; nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; @@ -1419,7 +1415,6 @@ interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - supports-clkreq; nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; @@ -1478,60 +1473,192 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0_0: cpu@0 { compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; - reg = <0x10000>; + reg = <0x000>; enable-method = "psci"; + i-cache-size = <131072>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2c_0>; }; - cpu@1 { + cpu0_1: cpu@1 { compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; - reg = <0x10001>; + reg = <0x001>; enable-method = "psci"; + i-cache-size = <131072>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2c_0>; }; - cpu@2 { + cpu1_0: cpu@100 { compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; reg = <0x100>; enable-method = "psci"; + i-cache-size = <131072>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2c_1>; }; - cpu@3 { + cpu1_1: cpu@101 { compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; reg = <0x101>; enable-method = "psci"; + i-cache-size = <131072>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2c_1>; }; - cpu@4 { + cpu2_0: cpu@200 { compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; reg = <0x200>; enable-method = "psci"; + i-cache-size = <131072>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2c_2>; }; - cpu@5 { + cpu2_1: cpu@201 { compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; reg = <0x201>; enable-method = "psci"; + i-cache-size = <131072>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2c_2>; }; - cpu@6 { + cpu3_0: cpu@300 { compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; - reg = <0x10300>; + reg = <0x300>; enable-method = "psci"; + i-cache-size = <131072>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2c_3>; }; - cpu@7 { + cpu3_1: cpu@301 { compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; - reg = <0x10301>; + reg = <0x301>; enable-method = "psci"; + i-cache-size = <131072>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2c_3>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0_0>; + }; + + core1 { + cpu = <&cpu0_1>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu1_0>; + }; + + core1 { + cpu = <&cpu1_1>; + }; + }; + + cluster2 { + core0 { + cpu = <&cpu2_0>; + }; + + core1 { + cpu = <&cpu2_1>; + }; + }; + + cluster3 { + core0 { + cpu = <&cpu3_0>; + }; + + core1 { + cpu = <&cpu3_1>; + }; + }; + }; + + l2c_0: l2-cache0 { + cache-size = <2097152>; + cache-line-size = <64>; + cache-sets = <2048>; + next-level-cache = <&l3c>; + }; + + l2c_1: l2-cache1 { + cache-size = <2097152>; + cache-line-size = <64>; + cache-sets = <2048>; + next-level-cache = <&l3c>; + }; + + l2c_2: l2-cache2 { + cache-size = <2097152>; + cache-line-size = <64>; + cache-sets = <2048>; + next-level-cache = <&l3c>; + }; + + l2c_3: l2-cache3 { + cache-size = <2097152>; + cache-line-size = <64>; + cache-sets = <2048>; + next-level-cache = <&l3c>; + }; + + l3c: l3-cache { + cache-size = <4194304>; + cache-line-size = <64>; + cache-sets = <4096>; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi index 27723829d033..cb58f79deb48 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi @@ -279,6 +279,13 @@ pmc@7000e400 { nvidia,invert-interrupt; + nvidia,suspend-mode = <0>; + nvidia,cpu-pwr-good-time = <0>; + nvidia,cpu-pwr-off-time = <0>; + nvidia,core-pwr-good-time = <4587 3876>; + nvidia,core-pwr-off-time = <39065>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; }; /* eMMC */ diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi index a7dc319214a4..b0095072bc28 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi @@ -1612,7 +1612,7 @@ regulator-name = "VDD_HDMI_5V0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&exp1 12 GPIO_ACTIVE_LOW>; + gpio = <&exp1 12 GPIO_ACTIVE_HIGH>; enable-active-high; vin-supply = <&vdd_5v0_sys>; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts index 9d17ec707bce..90381d52ac54 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts @@ -64,6 +64,16 @@ status = "okay"; }; + sor@54540000 { + status = "okay"; + + avdd-io-hdmi-dp-supply = <&avdd_io_edp_1v05>; + vdd-hdmi-dp-pll-supply = <&vdd_1v8>; + + nvidia,xbar-cfg = <2 1 0 3 4>; + nvidia,dpaux = <&dpaux>; + }; + sor@54580000 { status = "okay"; @@ -76,6 +86,10 @@ GPIO_ACTIVE_LOW>; nvidia,xbar-cfg = <0 1 2 3 4>; }; + + dpaux@545c0000 { + status = "okay"; + }; }; gpu@57000000 { @@ -382,6 +396,13 @@ pmc@7000e400 { nvidia,invert-interrupt; + nvidia,suspend-mode = <0>; + nvidia,cpu-pwr-good-time = <0>; + nvidia,cpu-pwr-off-time = <0>; + nvidia,core-pwr-good-time = <4587 3876>; + nvidia,core-pwr-off-time = <39065>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; }; hda@70030000 { @@ -680,5 +701,19 @@ enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>; vin-supply = <&vdd_5v0_sys>; }; + + avdd_io_edp_1v05: regulator@7 { + compatible = "regulator-fixed"; + reg = <7>; + + regulator-name = "AVDD_IO_EDP_1V05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + + gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&avdd_1v05_pll>; + }; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 659753118e96..48c63256ba7f 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -254,10 +254,11 @@ reg = <0x0 0x54540000 0x0 0x00040000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA210_CLK_SOR0>, + <&tegra_car TEGRA210_CLK_SOR0_OUT>, <&tegra_car TEGRA210_CLK_PLL_D_OUT0>, <&tegra_car TEGRA210_CLK_PLL_DP>, <&tegra_car TEGRA210_CLK_SOR_SAFE>; - clock-names = "sor", "parent", "dp", "safe"; + clock-names = "sor", "out", "parent", "dp", "safe"; resets = <&tegra_car 182>; reset-names = "sor"; pinctrl-0 = <&state_dpaux_aux>; @@ -768,7 +769,8 @@ rtc@7000e000 { compatible = "nvidia,tegra210-rtc", "nvidia,tegra20-rtc"; reg = <0x0 0x7000e000 0x0 0x100>; - interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pmc>; clocks = <&tegra_car TEGRA210_CLK_RTC>; clock-names = "rtc"; }; @@ -778,6 +780,8 @@ reg = <0x0 0x7000e400 0x0 0x400>; clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; + #interrupt-cells = <2>; + interrupt-controller; powergates { pd_audio: aud { @@ -1438,6 +1442,16 @@ }; }; + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&{/cpus/cpu@0} &{/cpus/cpu@1} + &{/cpus/cpu@2} &{/cpus/cpu@3}>; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 @@ -1457,7 +1471,9 @@ reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */ 0x0 0x60006000 0x0 0x400>; /* CAR reg_base */ reg-names = "soctherm-reg", "car-reg"; - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "thermal", "edp"; clocks = <&tegra_car TEGRA210_CLK_TSENSOR>, <&tegra_car TEGRA210_CLK_SOC_THERM>; clock-names = "tsensor", "soctherm"; @@ -1504,6 +1520,7 @@ }; }; }; + mem { polling-delay-passive = <0>; polling-delay = <0>; @@ -1526,6 +1543,7 @@ */ }; }; + gpu { polling-delay-passive = <1000>; polling-delay = <0>; @@ -1554,6 +1572,7 @@ }; }; }; + pllx { polling-delay-passive = <0>; polling-delay = <0>; diff --git a/arch/arm64/boot/dts/realtek/Makefile b/arch/arm64/boot/dts/realtek/Makefile index 90c897ac3f7a..555638ada721 100644 --- a/arch/arm64/boot/dts/realtek/Makefile +++ b/arch/arm64/boot/dts/realtek/Makefile @@ -1,4 +1,9 @@ # SPDX-License-Identifier: GPL-2.0-only + +dtb-$(CONFIG_ARCH_REALTEK) += rtd1293-ds418j.dtb + dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-mele-v9.dtb dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-probox2-ava.dtb dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-zidoo-x9s.dtb + +dtb-$(CONFIG_ARCH_REALTEK) += rtd1296-ds418.dtb diff --git a/arch/arm64/boot/dts/realtek/rtd1293-ds418j.dts b/arch/arm64/boot/dts/realtek/rtd1293-ds418j.dts new file mode 100644 index 000000000000..b2dd583146b4 --- /dev/null +++ b/arch/arm64/boot/dts/realtek/rtd1293-ds418j.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +/* + * Copyright (c) 2017 Andreas Färber + */ + +/dts-v1/; + +#include "rtd1293.dtsi" + +/ { + compatible = "synology,ds418j", "realtek,rtd1293"; + model = "Synology DiskStation DS418j"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/realtek/rtd1293.dtsi b/arch/arm64/boot/dts/realtek/rtd1293.dtsi new file mode 100644 index 000000000000..bd4e22723f7b --- /dev/null +++ b/arch/arm64/boot/dts/realtek/rtd1293.dtsi @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +/* + * Realtek RTD1293 SoC + * + * Copyright (c) 2017-2019 Andreas Färber + */ + +#include "rtd129x.dtsi" + +/ { + compatible = "realtek,rtd1293"; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + next-level-cache = <&l2>; + }; + + l2: l2-cache { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; + +&arm_pmu { + interrupt-affinity = <&cpu0>, <&cpu1>; +}; diff --git a/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts b/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts index da19faab29d5..e98e508b9514 100644 --- a/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts +++ b/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) /* * Copyright (c) 2016-2017 Andreas Färber - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; diff --git a/arch/arm64/boot/dts/realtek/rtd1295.dtsi b/arch/arm64/boot/dts/realtek/rtd1295.dtsi index 41d7858da826..93f0e1d97721 100644 --- a/arch/arm64/boot/dts/realtek/rtd1295.dtsi +++ b/arch/arm64/boot/dts/realtek/rtd1295.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) /* * Realtek RTD1295 SoC * * Copyright (c) 2016-2017 Andreas Färber - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ #include "rtd129x.dtsi" diff --git a/arch/arm64/boot/dts/realtek/rtd1296-ds418.dts b/arch/arm64/boot/dts/realtek/rtd1296-ds418.dts new file mode 100644 index 000000000000..5a051a52bf88 --- /dev/null +++ b/arch/arm64/boot/dts/realtek/rtd1296-ds418.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +/* + * Copyright (c) 2017-2019 Andreas Färber + */ + +/dts-v1/; + +#include "rtd1296.dtsi" + +/ { + compatible = "synology,ds418", "realtek,rtd1296"; + model = "Synology DiskStation DS418"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x80000000>; + }; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/realtek/rtd1296.dtsi b/arch/arm64/boot/dts/realtek/rtd1296.dtsi new file mode 100644 index 000000000000..0f9e59cac086 --- /dev/null +++ b/arch/arm64/boot/dts/realtek/rtd1296.dtsi @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +/* + * Realtek RTD1296 SoC + * + * Copyright (c) 2017-2019 Andreas Färber + */ + +#include "rtd129x.dtsi" + +/ { + compatible = "realtek,rtd1296"; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x2>; + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x3>; + next-level-cache = <&l2>; + }; + + l2: l2-cache { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; + +&arm_pmu { + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; +}; diff --git a/arch/arm64/boot/dts/realtek/rtd129x.dtsi b/arch/arm64/boot/dts/realtek/rtd129x.dtsi index b9cb92466fc7..4433114476f5 100644 --- a/arch/arm64/boot/dts/realtek/rtd129x.dtsi +++ b/arch/arm64/boot/dts/realtek/rtd129x.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) /* * Realtek RTD1293/RTD1295/RTD1296 SoC * * Copyright (c) 2016-2017 Andreas Färber - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /memreserve/ 0x0000000000000000 0x0000000000030000; @@ -13,6 +12,7 @@ /memreserve/ 0x0000000001ffe000 0x0000000000004000; #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/realtek,rtd1295.h> / { interrupt-parent = <&gic>; @@ -24,6 +24,13 @@ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; }; + osc27M: osc { + compatible = "fixed-clock"; + clock-frequency = <27000000>; + #clock-cells = <0>; + clock-output-names = "osc27M"; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -31,12 +38,49 @@ /* Exclude up to 2 GiB of RAM */ ranges = <0x80000000 0x80000000 0x80000000>; + reset1: reset-controller@98000000 { + compatible = "snps,dw-low-reset"; + reg = <0x98000000 0x4>; + #reset-cells = <1>; + }; + + reset2: reset-controller@98000004 { + compatible = "snps,dw-low-reset"; + reg = <0x98000004 0x4>; + #reset-cells = <1>; + }; + + reset3: reset-controller@98000008 { + compatible = "snps,dw-low-reset"; + reg = <0x98000008 0x4>; + #reset-cells = <1>; + }; + + reset4: reset-controller@98000050 { + compatible = "snps,dw-low-reset"; + reg = <0x98000050 0x4>; + #reset-cells = <1>; + }; + + iso_reset: reset-controller@98007088 { + compatible = "snps,dw-low-reset"; + reg = <0x98007088 0x4>; + #reset-cells = <1>; + }; + + wdt: watchdog@98007680 { + compatible = "realtek,rtd1295-watchdog"; + reg = <0x98007680 0x100>; + clocks = <&osc27M>; + }; + uart0: serial@98007800 { compatible = "snps,dw-apb-uart"; reg = <0x98007800 0x400>; reg-shift = <2>; reg-io-width = <4>; clock-frequency = <27000000>; + resets = <&iso_reset RTD1295_ISO_RSTN_UR0>; status = "disabled"; }; @@ -46,6 +90,7 @@ reg-shift = <2>; reg-io-width = <4>; clock-frequency = <432000000>; + resets = <&reset2 RTD1295_RSTN_UR1>; status = "disabled"; }; @@ -55,6 +100,7 @@ reg-shift = <2>; reg-io-width = <4>; clock-frequency = <432000000>; + resets = <&reset2 RTD1295_RSTN_UR2>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 42b74c283289..8fdbd2267384 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -1,6 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb +dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n.dtb +dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex.dtb dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb @@ -10,6 +12,10 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb +dtb-$(CONFIG_ARCH_R8A77960) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb +dtb-$(CONFIG_ARCH_R8A77960) += r8a7796-m3ulcb-kf.dtb +dtb-$(CONFIG_ARCH_R8A77960) += r8a7796-salvator-xs.dtb +dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-salvator-xs.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb r8a77965-salvator-xs.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-m3nulcb.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-m3nulcb-kf.dtb diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi index 3e376d29a730..2c942a7eaeeb 100644 --- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi @@ -86,7 +86,7 @@ label = "rcar-sound"; - dais = <&rsnd_port0>; + dais = <&rsnd_port>; }; vbus0_usb2: regulator-vbus0-usb2 { @@ -142,14 +142,6 @@ }; &du { - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&cpg CPG_MOD 722>, - <&versaclock5 1>, - <&x302_clk>, - <&versaclock5 2>; - clock-names = "du.0", "du.1", "du.2", - "dclkin.0", "dclkin.1", "dclkin.2"; status = "okay"; }; @@ -191,7 +183,7 @@ port@2 { reg = <2>; dw_hdmi0_snd_in: endpoint { - remote-endpoint = <&rsnd_endpoint0>; + remote-endpoint = <&rsnd_endpoint>; }; }; }; @@ -327,17 +319,15 @@ /* Single DAI */ #sound-dai-cells = <0>; - ports { - rsnd_port0: port@0 { - rsnd_endpoint0: endpoint { - remote-endpoint = <&dw_hdmi0_snd_in>; + rsnd_port: port { + rsnd_endpoint: endpoint { + remote-endpoint = <&dw_hdmi0_snd_in>; - dai-format = "i2s"; - bitclock-master = <&rsnd_endpoint0>; - frame-master = <&rsnd_endpoint0>; + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint>; + frame-master = <&rsnd_endpoint>; - playback = <&ssi2>; - }; + playback = <&ssi2>; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi index 4280b190dc68..28fe17e3bc4e 100644 --- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi @@ -13,6 +13,14 @@ chosen { bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 50000>; + + brightness-levels = <0 2 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; }; &avb { @@ -43,11 +51,36 @@ status = "okay"; }; -&pciec0 { - status = "okay"; +&gpio1 { + /* + * When GP1_20 is LOW LVDS0 is connected to the LVDS connector + * When GP1_20 is HIGH LVDS0 is connected to the LT8918L + */ + lvds-connector-en-gpio { + gpio-hog; + gpios = <20 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "lvds-connector-en-gpio"; + }; +}; + +&lvds0 { + /* + * Please include the LVDS panel .dtsi file and uncomment the below line + * to enable LVDS panel connected to RZ/G2[MN] boards. + */ + + /* status = "okay"; */ + + ports { + port@1 { + lvds_connector: endpoint { + }; + }; + }; }; -&pciec1 { +&pciec0 { status = "okay"; }; @@ -82,4 +115,16 @@ groups = "can1_data"; function = "can1"; }; + + pwm0_pins: pwm0 { + groups = "pwm0"; + function = "pwm0"; + }; +}; + +&pwm0 { + pinctrl-0 = <&pwm0_pins>; + pinctrl-names = "default"; + + status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts index 6e33a3b27706..c754fca239d9 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts +++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts @@ -13,3 +13,7 @@ compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2m", "renesas,r8a774a1"; }; + +&pciec1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts index 93ca973c856c..96f2fb080a1a 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts +++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts @@ -24,3 +24,14 @@ reg = <0x6 0x00000000 0x0 0x80000000>; }; }; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&versaclock5 1>, + <&x302_clk>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.2", + "dclkin.0", "dclkin.1", "dclkin.2"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index 06c7c849c8ab..34a9f472fbb4 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -1726,17 +1726,6 @@ "ssi.1", "ssi.0"; status = "disabled"; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - }; - port@1 { - reg = <1>; - }; - }; - rcar_sound,ctu { ctu00: ctu-0 { }; ctu01: ctu-1 { }; @@ -2651,7 +2640,7 @@ clock-names = "du.0", "du.1", "du.2"; status = "disabled"; - vsps = <&vspd0 &vspd1 &vspd2>; + vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>; ports { #address-cells = <1>; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts new file mode 100644 index 000000000000..ab47c0bd9c19 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2N sub board + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +#include "r8a774b1-hihope-rzg2n.dts" +#include "hihope-rzg2-ex.dtsi" + +/ { + model = "HopeRun HiHope RZ/G2N with sub board"; + compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2n", + "renesas,r8a774b1"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts new file mode 100644 index 000000000000..9910c1aa0a61 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2N main board + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a774b1.dtsi" +#include "hihope-common.dtsi" + +/ { + model = "HopeRun HiHope RZ/G2N main board based on r8a774b1"; + compatible = "hoperun,hihope-rzg2n", "renesas,r8a774b1"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@480000000 { + device_type = "memory"; + reg = <0x4 0x80000000 0x0 0x80000000>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 721>, + <&versaclock5 1>, + <&x302_clk>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.3", + "dclkin.0", "dclkin.1", "dclkin.3"; +}; + +&sdhi3 { + mmc-hs400-1_8v; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi new file mode 100644 index 000000000000..fe78387e4bb8 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi @@ -0,0 +1,2627 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the r8a774b1 SoC + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/r8a774b1-cpg-mssr.h> +#include <dt-bindings/power/r8a774b1-sysc.h> + +/ { + compatible = "renesas,r8a774b1"; + #address-cells = <2>; + #size-cells = <2>; + + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + cluster0_opp: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <830000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <830000>; + clock-latency-ns = <300000>; + }; + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <830000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + a57_0: cpu@0 { + compatible = "arm,cortex-a57"; + reg = <0x0>; + device_type = "cpu"; + power-domains = <&sysc R8A774B1_PD_CA57_CPU0>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + #cooling-cells = <2>; + dynamic-power-coefficient = <854>; + clocks = <&cpg CPG_CORE R8A774B1_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + }; + + a57_1: cpu@1 { + compatible = "arm,cortex-a57"; + reg = <0x1>; + device_type = "cpu"; + power-domains = <&sysc R8A774B1_PD_CA57_CPU1>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + clocks = <&cpg CPG_CORE R8A774B1_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + }; + + L2_CA57: cache-controller-0 { + compatible = "cache"; + power-domains = <&sysc R8A774B1_PD_CA57_SCU>; + cache-unified; + cache-level = <2>; + }; + }; + + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + extalr_clk: extalr { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + pmu_a57 { + compatible = "arm,cortex-a57-pmu"; + interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a57_0>, <&a57_1>; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a774b1-wdt", + "renesas,rcar-gen3-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 402>; + status = "disabled"; + }; + + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a774b1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 16>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 912>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a774b1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 29>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 911>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a774b1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 15>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 910>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a774b1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 16>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 909>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a774b1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 18>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 908>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a774b1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 907>; + }; + + gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a774b1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055400 0 0x50>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 906>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 906>; + }; + + gpio7: gpio@e6055800 { + compatible = "renesas,gpio-r8a774b1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055800 0 0x50>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 224 4>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 905>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 905>; + }; + + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a774b1"; + reg = <0 0xe6060000 0 0x50c>; + }; + + cmt0: timer@e60f0000 { + compatible = "renesas,r8a774b1-cmt0", + "renesas,rcar-gen3-cmt0"; + reg = <0 0xe60f0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 303>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 303>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a774b1-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 302>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 302>; + status = "disabled"; + }; + + cmt2: timer@e6140000 { + compatible = "renesas,r8a774b1-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6140000 0 0x1004>; + interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 301>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 301>; + status = "disabled"; + }; + + cmt3: timer@e6148000 { + compatible = "renesas,r8a774b1-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6148000 0 0x1004>; + interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 300>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 300>; + status = "disabled"; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a774b1-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&extalr_clk>; + clock-names = "extal", "extalr"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a774b1-rst"; + reg = <0 0xe6160000 0 0x0200>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a774b1-sysc"; + reg = <0 0xe6180000 0 0x0400>; + #power-domain-cells = <1>; + }; + + tsc: thermal@e6198000 { + compatible = "renesas,r8a774b1-thermal"; + reg = <0 0xe6198000 0 0x100>, + <0 0xe61a0000 0 0x100>, + <0 0xe61a8000 0 0x100>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <1>; + }; + + intc_ex: interrupt-controller@e61c0000 { + compatible = "renesas,intc-ex-r8a774b1", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 407>; + }; + + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a774b1", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@e6fc0000 { + compatible = "renesas,tmu-r8a774b1", "renesas,tmu"; + reg = <0 0xe6fc0000 0 0x30>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + tmu2: timer@e6fd0000 { + compatible = "renesas,tmu-r8a774b1", "renesas,tmu"; + reg = <0 0xe6fd0000 0 0x30>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 123>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 123>; + status = "disabled"; + }; + + tmu3: timer@e6fe0000 { + compatible = "renesas,tmu-r8a774b1", "renesas,tmu"; + reg = <0 0xe6fe0000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu4: timer@ffc00000 { + compatible = "renesas,tmu-r8a774b1", "renesas,tmu"; + reg = <0 0xffc00000 0 0x30>; + interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + + i2c0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774b1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6500000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 931>; + dmas = <&dmac1 0x91>, <&dmac1 0x90>, + <&dmac2 0x91>, <&dmac2 0x90>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774b1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 930>; + dmas = <&dmac1 0x93>, <&dmac1 0x92>, + <&dmac2 0x93>, <&dmac2 0x92>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c2: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774b1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6510000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 929>; + dmas = <&dmac1 0x95>, <&dmac1 0x94>, + <&dmac2 0x95>, <&dmac2 0x94>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774b1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 928>; + dmas = <&dmac0 0x97>, <&dmac0 0x96>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c4: i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774b1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d8000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 927>; + dmas = <&dmac0 0x99>, <&dmac0 0x98>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c5: i2c@e66e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774b1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e0000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 919>; + dmas = <&dmac0 0x9b>, <&dmac0 0x9a>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c6: i2c@e66e8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774b1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e8000 0 0x40>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 918>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 918>; + dmas = <&dmac0 0x9d>, <&dmac0 0x9c>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c_dvfs: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a774b1", + "renesas,rcar-gen3-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 926>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 926>; + dmas = <&dmac0 0x11>, <&dmac0 0x10>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a774b1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6540000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 520>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>, + <&dmac2 0x31>, <&dmac2 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 520>; + status = "disabled"; + }; + + hscif1: serial@e6550000 { + compatible = "renesas,hscif-r8a774b1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6550000 0 0x60>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 519>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x33>, <&dmac1 0x32>, + <&dmac2 0x33>, <&dmac2 0x32>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 519>; + status = "disabled"; + }; + + hscif2: serial@e6560000 { + compatible = "renesas,hscif-r8a774b1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6560000 0 0x60>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 518>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x35>, <&dmac1 0x34>, + <&dmac2 0x35>, <&dmac2 0x34>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 518>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a774b1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66a0000 0 0x60>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x37>, <&dmac0 0x36>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 517>; + status = "disabled"; + }; + + hscif4: serial@e66b0000 { + compatible = "renesas,hscif-r8a774b1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66b0000 0 0x60>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 516>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x38>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 516>; + status = "disabled"; + }; + + hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a774b1", + "renesas,rcar-gen3-usbhs"; + reg = <0 0xe6590000 0 0x200>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>; + dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, + <&usb_dmac1 0>, <&usb_dmac1 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; + renesas,buswait = <11>; + phys = <&usb2_phy0 3>; + phy-names = "usb"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 704>, <&cpg 703>; + status = "disabled"; + }; + + usb_dmac0: dma-controller@e65a0000 { + compatible = "renesas,r8a774b1-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 330>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 330>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac1: dma-controller@e65b0000 { + compatible = "renesas,r8a774b1-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 331>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb3_phy0: usb-phy@e65ee000 { + compatible = "renesas,r8a774b1-usb3-phy", + "renesas,rcar-gen3-usb3-phy"; + reg = <0 0xe65ee000 0 0x90>; + clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, + <&usb_extal_clk>; + clock-names = "usb3-if", "usb3s_clk", "usb_extal"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 328>; + #phy-cells = <0>; + status = "disabled"; + }; + + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a774b1", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x10000>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 219>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>, + <&ipmmu_ds0 2>, <&ipmmu_ds0 3>, + <&ipmmu_ds0 4>, <&ipmmu_ds0 5>, + <&ipmmu_ds0 6>, <&ipmmu_ds0 7>, + <&ipmmu_ds0 8>, <&ipmmu_ds0 9>, + <&ipmmu_ds0 10>, <&ipmmu_ds0 11>, + <&ipmmu_ds0 12>, <&ipmmu_ds0 13>, + <&ipmmu_ds0 14>, <&ipmmu_ds0 15>; + }; + + dmac1: dma-controller@e7300000 { + compatible = "renesas,dmac-r8a774b1", + "renesas,rcar-dmac"; + reg = <0 0xe7300000 0 0x10000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>, + <&ipmmu_ds1 2>, <&ipmmu_ds1 3>, + <&ipmmu_ds1 4>, <&ipmmu_ds1 5>, + <&ipmmu_ds1 6>, <&ipmmu_ds1 7>, + <&ipmmu_ds1 8>, <&ipmmu_ds1 9>, + <&ipmmu_ds1 10>, <&ipmmu_ds1 11>, + <&ipmmu_ds1 12>, <&ipmmu_ds1 13>, + <&ipmmu_ds1 14>, <&ipmmu_ds1 15>; + }; + + dmac2: dma-controller@e7310000 { + compatible = "renesas,dmac-r8a774b1", + "renesas,rcar-dmac"; + reg = <0 0xe7310000 0 0x10000>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 217>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 217>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>, + <&ipmmu_ds1 18>, <&ipmmu_ds1 19>, + <&ipmmu_ds1 20>, <&ipmmu_ds1 21>, + <&ipmmu_ds1 22>, <&ipmmu_ds1 23>, + <&ipmmu_ds1 24>, <&ipmmu_ds1 25>, + <&ipmmu_ds1 26>, <&ipmmu_ds1 27>, + <&ipmmu_ds1 28>, <&ipmmu_ds1 29>, + <&ipmmu_ds1 30>, <&ipmmu_ds1 31>; + }; + + ipmmu_ds0: mmu@e6740000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xe6740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ds1: mmu@e7740000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 1>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_hc: mmu@e6570000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xe6570000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 2>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mm: mmu@e67b0000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mp: mmu@ec670000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xec670000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 4>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_pv0: mmu@fd800000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xfd800000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 6>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vc0: mmu@fe6b0000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xfe6b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 12>; + power-domains = <&sysc R8A774B1_PD_A3VC>; + #iommu-cells = <1>; + }; + + ipmmu_vi0: mmu@febd0000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 14>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vp0: mmu@fe990000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xfe990000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 16>; + power-domains = <&sysc R8A774B1_PD_A3VP>; + #iommu-cells = <1>; + }; + + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a774b1", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6800000 0 0x800>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 812>; + phy-mode = "rgmii"; + iommus = <&ipmmu_ds0 16>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + can0: can@e6c30000 { + compatible = "renesas,can-r8a774b1", + "renesas,rcar-gen3-can"; + reg = <0 0xe6c30000 0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>, + <&cpg CPG_CORE R8A774B1_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774B1_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 916>; + status = "disabled"; + }; + + can1: can@e6c38000 { + compatible = "renesas,can-r8a774b1", + "renesas,rcar-gen3-can"; + reg = <0 0xe6c38000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>, + <&cpg CPG_CORE R8A774B1_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774B1_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 915>; + status = "disabled"; + }; + + canfd: can@e66c0000 { + compatible = "renesas,r8a774b1-canfd", + "renesas,rcar-gen3-canfd"; + reg = <0 0xe66c0000 0 0x8000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 914>, + <&cpg CPG_CORE R8A774B1_CLK_CANFD>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774B1_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 914>; + status = "disabled"; + + channel0 { + status = "disabled"; + }; + + channel1 { + status = "disabled"; + }; + }; + + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pwm5: pwm@e6e35000 { + compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar"; + reg = <0 0xe6e35000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pwm6: pwm@e6e36000 { + compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar"; + reg = <0 0xe6e36000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a774b1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 0x40>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x51>, <&dmac1 0x50>, + <&dmac2 0x51>, <&dmac2 0x50>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 207>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a774b1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 0x40>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x53>, <&dmac1 0x52>, + <&dmac2 0x53>, <&dmac2 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 206>; + status = "disabled"; + }; + + scif2: serial@e6e88000 { + compatible = "renesas,scif-r8a774b1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e88000 0 0x40>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 310>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x13>, <&dmac1 0x12>, + <&dmac2 0x13>, <&dmac2 0x12>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 310>; + status = "disabled"; + }; + + scif3: serial@e6c50000 { + compatible = "renesas,scif-r8a774b1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c50000 0 0x40>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x57>, <&dmac0 0x56>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 204>; + status = "disabled"; + }; + + scif4: serial@e6c40000 { + compatible = "renesas,scif-r8a774b1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c40000 0 0x40>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x59>, <&dmac0 0x58>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 203>; + status = "disabled"; + }; + + scif5: serial@e6f30000 { + compatible = "renesas,scif-r8a774b1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6f30000 0 0x40>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 202>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x5b>, <&dmac1 0x5a>, + <&dmac2 0x5b>, <&dmac2 0x5a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 202>; + status = "disabled"; + }; + + msiof0: spi@e6e90000 { + compatible = "renesas,msiof-r8a774b1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6e90000 0 0x0064>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 211>; + dmas = <&dmac1 0x41>, <&dmac1 0x40>, + <&dmac2 0x41>, <&dmac2 0x40>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 211>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6ea0000 { + compatible = "renesas,msiof-r8a774b1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6ea0000 0 0x0064>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 210>; + dmas = <&dmac1 0x43>, <&dmac1 0x42>, + <&dmac2 0x43>, <&dmac2 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 210>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6c00000 { + compatible = "renesas,msiof-r8a774b1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c00000 0 0x0064>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 209>; + dmas = <&dmac0 0x45>, <&dmac0 0x44>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 209>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof3: spi@e6c10000 { + compatible = "renesas,msiof-r8a774b1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c10000 0 0x0064>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x47>, <&dmac0 0x46>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 208>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a774b1"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 811>; + renesas,id = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin0csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin0>; + }; + vin0csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin0>; + }; + }; + }; + }; + + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a774b1"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 810>; + renesas,id = <1>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin1csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin1>; + }; + vin1csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin1>; + }; + }; + }; + }; + + vin2: video@e6ef2000 { + compatible = "renesas,vin-r8a774b1"; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 809>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 809>; + renesas,id = <2>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin2csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin2>; + }; + vin2csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin2>; + }; + }; + }; + }; + + vin3: video@e6ef3000 { + compatible = "renesas,vin-r8a774b1"; + reg = <0 0xe6ef3000 0 0x1000>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 808>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 808>; + renesas,id = <3>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin3csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin3>; + }; + vin3csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin3>; + }; + }; + }; + }; + + vin4: video@e6ef4000 { + compatible = "renesas,vin-r8a774b1"; + reg = <0 0xe6ef4000 0 0x1000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 807>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 807>; + renesas,id = <4>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin4csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin4>; + }; + vin4csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin4>; + }; + }; + }; + }; + + vin5: video@e6ef5000 { + compatible = "renesas,vin-r8a774b1"; + reg = <0 0xe6ef5000 0 0x1000>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 806>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 806>; + renesas,id = <5>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin5csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin5>; + }; + vin5csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin5>; + }; + }; + }; + }; + + vin6: video@e6ef6000 { + compatible = "renesas,vin-r8a774b1"; + reg = <0 0xe6ef6000 0 0x1000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 805>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 805>; + renesas,id = <6>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin6csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin6>; + }; + vin6csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin6>; + }; + }; + }; + }; + + vin7: video@e6ef7000 { + compatible = "renesas,vin-r8a774b1"; + reg = <0 0xe6ef7000 0 0x1000>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 804>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 804>; + renesas,id = <7>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin7csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin7>; + }; + vin7csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin7>; + }; + }; + }; + }; + + rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + /* + * #clock-cells is required for audio_clkout0/1/2/3 + * + * clkout : #clock-cells = <0>; <&rcar_sound>; + * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a774b1", "renesas,rcar_sound-gen3"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, + <&audio_clk_c>, + <&cpg CPG_CORE R8A774B1_CLK_S0D4>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", + "src.5", "src.4", "src.3", "src.2", + "src.1", "src.0", + "mix.1", "mix.0", + "ctu.1", "ctu.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, + <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, + <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0"; + status = "disabled"; + + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + + rcar_sound,dvc { + dvc0: dvc-0 { + dmas = <&audma1 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc-1 { + dmas = <&audma1 0xbe>; + dma-names = "tx"; + }; + }; + + rcar_sound,mix { + mix0: mix-0 { }; + mix1: mix-1 { }; + }; + + rcar_sound,src { + src0: src-0 { + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x85>, <&audma1 0x9a>; + dma-names = "rx", "tx"; + }; + src1: src-1 { + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma1 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src-2 { + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma1 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src-3 { + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma1 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src-4 { + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma1 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src-5 { + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma1 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src-6 { + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma1 0xb4>; + dma-names = "rx", "tx"; + }; + src7: src-7 { + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x93>, <&audma1 0xb6>; + dma-names = "rx", "tx"; + }; + src8: src-8 { + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x95>, <&audma1 0xb8>; + dma-names = "rx", "tx"; + }; + src9: src-9 { + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x97>, <&audma1 0xba>; + dma-names = "rx", "tx"; + }; + }; + + rcar_sound,ssi { + ssi0: ssi-0 { + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma1 0x02>; + dma-names = "rx", "tx"; + }; + ssi1: ssi-1 { + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma1 0x04>; + dma-names = "rx", "tx"; + }; + ssi2: ssi-2 { + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma1 0x06>; + dma-names = "rx", "tx"; + }; + ssi3: ssi-3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma1 0x08>; + dma-names = "rx", "tx"; + }; + ssi4: ssi-4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma1 0x0a>; + dma-names = "rx", "tx"; + }; + ssi5: ssi-5 { + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma1 0x0c>; + dma-names = "rx", "tx"; + }; + ssi6: ssi-6 { + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma1 0x0e>; + dma-names = "rx", "tx"; + }; + ssi7: ssi-7 { + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma1 0x10>; + dma-names = "rx", "tx"; + }; + ssi8: ssi-8 { + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma1 0x12>; + dma-names = "rx", "tx"; + }; + ssi9: ssi-9 { + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma1 0x14>; + dma-names = "rx", "tx"; + }; + }; + + rcar_sound,ssiu { + ssiu00: ssiu-0 { + dmas = <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx"; + }; + ssiu01: ssiu-1 { + dmas = <&audma0 0x35>, <&audma1 0x36>; + dma-names = "rx", "tx"; + }; + ssiu02: ssiu-2 { + dmas = <&audma0 0x37>, <&audma1 0x38>; + dma-names = "rx", "tx"; + }; + ssiu03: ssiu-3 { + dmas = <&audma0 0x47>, <&audma1 0x48>; + dma-names = "rx", "tx"; + }; + ssiu04: ssiu-4 { + dmas = <&audma0 0x3F>, <&audma1 0x40>; + dma-names = "rx", "tx"; + }; + ssiu05: ssiu-5 { + dmas = <&audma0 0x43>, <&audma1 0x44>; + dma-names = "rx", "tx"; + }; + ssiu06: ssiu-6 { + dmas = <&audma0 0x4F>, <&audma1 0x50>; + dma-names = "rx", "tx"; + }; + ssiu07: ssiu-7 { + dmas = <&audma0 0x53>, <&audma1 0x54>; + dma-names = "rx", "tx"; + }; + ssiu10: ssiu-8 { + dmas = <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx"; + }; + ssiu11: ssiu-9 { + dmas = <&audma0 0x4B>, <&audma1 0x4C>; + dma-names = "rx", "tx"; + }; + ssiu12: ssiu-10 { + dmas = <&audma0 0x57>, <&audma1 0x58>; + dma-names = "rx", "tx"; + }; + ssiu13: ssiu-11 { + dmas = <&audma0 0x59>, <&audma1 0x5A>; + dma-names = "rx", "tx"; + }; + ssiu14: ssiu-12 { + dmas = <&audma0 0x5F>, <&audma1 0x60>; + dma-names = "rx", "tx"; + }; + ssiu15: ssiu-13 { + dmas = <&audma0 0xC3>, <&audma1 0xC4>; + dma-names = "rx", "tx"; + }; + ssiu16: ssiu-14 { + dmas = <&audma0 0xC7>, <&audma1 0xC8>; + dma-names = "rx", "tx"; + }; + ssiu17: ssiu-15 { + dmas = <&audma0 0xCB>, <&audma1 0xCC>; + dma-names = "rx", "tx"; + }; + ssiu20: ssiu-16 { + dmas = <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx"; + }; + ssiu21: ssiu-17 { + dmas = <&audma0 0x67>, <&audma1 0x68>; + dma-names = "rx", "tx"; + }; + ssiu22: ssiu-18 { + dmas = <&audma0 0x6B>, <&audma1 0x6C>; + dma-names = "rx", "tx"; + }; + ssiu23: ssiu-19 { + dmas = <&audma0 0x6D>, <&audma1 0x6E>; + dma-names = "rx", "tx"; + }; + ssiu24: ssiu-20 { + dmas = <&audma0 0xCF>, <&audma1 0xCE>; + dma-names = "rx", "tx"; + }; + ssiu25: ssiu-21 { + dmas = <&audma0 0xEB>, <&audma1 0xEC>; + dma-names = "rx", "tx"; + }; + ssiu26: ssiu-22 { + dmas = <&audma0 0xED>, <&audma1 0xEE>; + dma-names = "rx", "tx"; + }; + ssiu27: ssiu-23 { + dmas = <&audma0 0xEF>, <&audma1 0xF0>; + dma-names = "rx", "tx"; + }; + ssiu30: ssiu-24 { + dmas = <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx"; + }; + ssiu31: ssiu-25 { + dmas = <&audma0 0x21>, <&audma1 0x22>; + dma-names = "rx", "tx"; + }; + ssiu32: ssiu-26 { + dmas = <&audma0 0x23>, <&audma1 0x24>; + dma-names = "rx", "tx"; + }; + ssiu33: ssiu-27 { + dmas = <&audma0 0x25>, <&audma1 0x26>; + dma-names = "rx", "tx"; + }; + ssiu34: ssiu-28 { + dmas = <&audma0 0x27>, <&audma1 0x28>; + dma-names = "rx", "tx"; + }; + ssiu35: ssiu-29 { + dmas = <&audma0 0x29>, <&audma1 0x2A>; + dma-names = "rx", "tx"; + }; + ssiu36: ssiu-30 { + dmas = <&audma0 0x2B>, <&audma1 0x2C>; + dma-names = "rx", "tx"; + }; + ssiu37: ssiu-31 { + dmas = <&audma0 0x2D>, <&audma1 0x2E>; + dma-names = "rx", "tx"; + }; + ssiu40: ssiu-32 { + dmas = <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx"; + }; + ssiu41: ssiu-33 { + dmas = <&audma0 0x17>, <&audma1 0x18>; + dma-names = "rx", "tx"; + }; + ssiu42: ssiu-34 { + dmas = <&audma0 0x19>, <&audma1 0x1A>; + dma-names = "rx", "tx"; + }; + ssiu43: ssiu-35 { + dmas = <&audma0 0x1B>, <&audma1 0x1C>; + dma-names = "rx", "tx"; + }; + ssiu44: ssiu-36 { + dmas = <&audma0 0x1D>, <&audma1 0x1E>; + dma-names = "rx", "tx"; + }; + ssiu45: ssiu-37 { + dmas = <&audma0 0x1F>, <&audma1 0x20>; + dma-names = "rx", "tx"; + }; + ssiu46: ssiu-38 { + dmas = <&audma0 0x31>, <&audma1 0x32>; + dma-names = "rx", "tx"; + }; + ssiu47: ssiu-39 { + dmas = <&audma0 0x33>, <&audma1 0x34>; + dma-names = "rx", "tx"; + }; + ssiu50: ssiu-40 { + dmas = <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx"; + }; + ssiu60: ssiu-41 { + dmas = <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx"; + }; + ssiu70: ssiu-42 { + dmas = <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx"; + }; + ssiu80: ssiu-43 { + dmas = <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx"; + }; + ssiu90: ssiu-44 { + dmas = <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx"; + }; + ssiu91: ssiu-45 { + dmas = <&audma0 0x7F>, <&audma1 0x80>; + dma-names = "rx", "tx"; + }; + ssiu92: ssiu-46 { + dmas = <&audma0 0x81>, <&audma1 0x82>; + dma-names = "rx", "tx"; + }; + ssiu93: ssiu-47 { + dmas = <&audma0 0x83>, <&audma1 0x84>; + dma-names = "rx", "tx"; + }; + ssiu94: ssiu-48 { + dmas = <&audma0 0xA3>, <&audma1 0xA4>; + dma-names = "rx", "tx"; + }; + ssiu95: ssiu-49 { + dmas = <&audma0 0xA5>, <&audma1 0xA6>; + dma-names = "rx", "tx"; + }; + ssiu96: ssiu-50 { + dmas = <&audma0 0xA7>, <&audma1 0xA8>; + dma-names = "rx", "tx"; + }; + ssiu97: ssiu-51 { + dmas = <&audma0 0xA9>, <&audma1 0xAA>; + dma-names = "rx", "tx"; + }; + }; + }; + + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a774b1", + "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 502>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 502>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + audma1: dma-controller@ec720000 { + compatible = "renesas,dmac-r8a774b1", + "renesas,rcar-dmac"; + reg = <0 0xec720000 0 0x10000>; + interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 501>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 501>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + xhci0: usb@ee000000 { + compatible = "renesas,xhci-r8a774b1", + "renesas,rcar-gen3-xhci"; + reg = <0 0xee000000 0 0xc00>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 328>; + status = "disabled"; + }; + + usb3_peri0: usb@ee020000 { + compatible = "renesas,r8a774b1-usb3-peri", + "renesas,rcar-gen3-usb3-peri"; + reg = <0 0xee020000 0 0x400>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 328>; + status = "disabled"; + }; + + ohci0: usb@ee080000 { + compatible = "generic-ohci"; + reg = <0 0xee080000 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + phys = <&usb2_phy0 1>; + phy-names = "usb"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + status = "disabled"; + }; + + ohci1: usb@ee0a0000 { + compatible = "generic-ohci"; + reg = <0 0xee0a0000 0 0x100>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 702>; + phys = <&usb2_phy1 1>; + phy-names = "usb"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 702>; + status = "disabled"; + }; + + ehci0: usb@ee080100 { + compatible = "generic-ehci"; + reg = <0 0xee080100 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + phys = <&usb2_phy0 2>; + phy-names = "usb"; + companion = <&ohci0>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + status = "disabled"; + }; + + ehci1: usb@ee0a0100 { + compatible = "generic-ehci"; + reg = <0 0xee0a0100 0 0x100>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 702>; + phys = <&usb2_phy1 2>; + phy-names = "usb"; + companion = <&ohci1>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 702>; + status = "disabled"; + }; + + usb2_phy0: usb-phy@ee080200 { + compatible = "renesas,usb2-phy-r8a774b1", + "renesas,rcar-gen3-usb2-phy"; + reg = <0 0xee080200 0 0x700>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + #phy-cells = <1>; + status = "disabled"; + }; + + usb2_phy1: usb-phy@ee0a0200 { + compatible = "renesas,usb2-phy-r8a774b1", + "renesas,rcar-gen3-usb2-phy"; + reg = <0 0xee0a0200 0 0x700>; + clocks = <&cpg CPG_MOD 702>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 702>; + #phy-cells = <1>; + status = "disabled"; + }; + + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a774b1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee100000 0 0x2000>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + max-frequency = <200000000>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 314>; + status = "disabled"; + }; + + sdhi1: sd@ee120000 { + compatible = "renesas,sdhi-r8a774b1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee120000 0 0x2000>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 313>; + max-frequency = <200000000>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 313>; + status = "disabled"; + }; + + sdhi2: sd@ee140000 { + compatible = "renesas,sdhi-r8a774b1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee140000 0 0x2000>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + max-frequency = <200000000>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 312>; + status = "disabled"; + }; + + sdhi3: sd@ee160000 { + compatible = "renesas,sdhi-r8a774b1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee160000 0 0x2000>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 311>; + max-frequency = <200000000>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 311>; + status = "disabled"; + }; + + sata: sata@ee300000 { + compatible = "renesas,sata-r8a774b1", + "renesas,rcar-gen3-sata"; + reg = <0 0xee300000 0 0x200000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 815>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 815>; + status = "disabled"; + }; + + gic: interrupt-controller@f1010000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xf1010000 0 0x1000>, + <0x0 0xf1020000 0 0x20000>, + <0x0 0xf1040000 0 0x20000>, + <0x0 0xf1060000 0 0x20000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 408>; + }; + + pciec0: pcie@fe000000 { + compatible = "renesas,pcie-r8a774b1", + "renesas,pcie-rcar-gen3"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 319>; + status = "disabled"; + }; + + pciec1: pcie@ee800000 { + compatible = "renesas,pcie-r8a774b1", + "renesas,pcie-rcar-gen3"; + reg = <0 0xee800000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000 + 0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000 + 0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000 + 0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 318>; + status = "disabled"; + }; + + fdp1@fe940000 { + compatible = "renesas,fdp1"; + reg = <0 0xfe940000 0 0x2400>; + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 119>; + power-domains = <&sysc R8A774B1_PD_A3VP>; + resets = <&cpg 119>; + renesas,fcp = <&fcpf0>; + }; + + fcpf0: fcp@fe950000 { + compatible = "renesas,fcpf"; + reg = <0 0xfe950000 0 0x200>; + clocks = <&cpg CPG_MOD 615>; + power-domains = <&sysc R8A774B1_PD_A3VP>; + resets = <&cpg 615>; + }; + + vspb: vsp@fe960000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe960000 0 0x8000>; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 626>; + power-domains = <&sysc R8A774B1_PD_A3VP>; + resets = <&cpg 626>; + + renesas,fcp = <&fcpvb0>; + }; + + vspi0: vsp@fe9a0000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe9a0000 0 0x8000>; + interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 631>; + power-domains = <&sysc R8A774B1_PD_A3VP>; + resets = <&cpg 631>; + + renesas,fcp = <&fcpvi0>; + }; + + vspd0: vsp@fea20000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea20000 0 0x5000>; + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 623>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 623>; + + renesas,fcp = <&fcpvd0>; + }; + + vspd1: vsp@fea28000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea28000 0 0x5000>; + interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 622>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 622>; + + renesas,fcp = <&fcpvd1>; + }; + + fcpvb0: fcp@fe96f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe96f000 0 0x200>; + clocks = <&cpg CPG_MOD 607>; + power-domains = <&sysc R8A774B1_PD_A3VP>; + resets = <&cpg 607>; + }; + + fcpvd0: fcp@fea27000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea27000 0 0x200>; + clocks = <&cpg CPG_MOD 603>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 603>; + }; + + fcpvd1: fcp@fea2f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea2f000 0 0x200>; + clocks = <&cpg CPG_MOD 602>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 602>; + }; + + fcpvi0: fcp@fe9af000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe9af000 0 0x200>; + clocks = <&cpg CPG_MOD 611>; + power-domains = <&sysc R8A774B1_PD_A3VP>; + resets = <&cpg 611>; + }; + + csi20: csi2@fea80000 { + compatible = "renesas,r8a774b1-csi2"; + reg = <0 0xfea80000 0 0x10000>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 714>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 714>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi20vin0: endpoint@0 { + reg = <0>; + remote-endpoint = <&vin0csi20>; + }; + csi20vin1: endpoint@1 { + reg = <1>; + remote-endpoint = <&vin1csi20>; + }; + csi20vin2: endpoint@2 { + reg = <2>; + remote-endpoint = <&vin2csi20>; + }; + csi20vin3: endpoint@3 { + reg = <3>; + remote-endpoint = <&vin3csi20>; + }; + csi20vin4: endpoint@4 { + reg = <4>; + remote-endpoint = <&vin4csi20>; + }; + csi20vin5: endpoint@5 { + reg = <5>; + remote-endpoint = <&vin5csi20>; + }; + csi20vin6: endpoint@6 { + reg = <6>; + remote-endpoint = <&vin6csi20>; + }; + csi20vin7: endpoint@7 { + reg = <7>; + remote-endpoint = <&vin7csi20>; + }; + }; + }; + }; + + csi40: csi2@feaa0000 { + compatible = "renesas,r8a774b1-csi2"; + reg = <0 0xfeaa0000 0 0x10000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi40vin0: endpoint@0 { + reg = <0>; + remote-endpoint = <&vin0csi40>; + }; + csi40vin1: endpoint@1 { + reg = <1>; + remote-endpoint = <&vin1csi40>; + }; + csi40vin2: endpoint@2 { + reg = <2>; + remote-endpoint = <&vin2csi40>; + }; + csi40vin3: endpoint@3 { + reg = <3>; + remote-endpoint = <&vin3csi40>; + }; + csi40vin4: endpoint@4 { + reg = <4>; + remote-endpoint = <&vin4csi40>; + }; + csi40vin5: endpoint@5 { + reg = <5>; + remote-endpoint = <&vin5csi40>; + }; + csi40vin6: endpoint@6 { + reg = <6>; + remote-endpoint = <&vin6csi40>; + }; + csi40vin7: endpoint@7 { + reg = <7>; + remote-endpoint = <&vin7csi40>; + }; + }; + }; + }; + + hdmi0: hdmi@fead0000 { + compatible = "renesas,r8a774b1-hdmi", + "renesas,rcar-gen3-hdmi"; + reg = <0 0xfead0000 0 0x10000>; + interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 729>, + <&cpg CPG_CORE R8A774B1_CLK_HDMI>; + clock-names = "iahb", "isfr"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 729>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dw_hdmi0_in: endpoint { + remote-endpoint = <&du_out_hdmi0>; + }; + }; + port@1 { + reg = <1>; + }; + port@2 { + /* HDMI sound */ + reg = <2>; + }; + }; + }; + + du: display@feb00000 { + compatible = "renesas,du-r8a774b1"; + reg = <0 0xfeb00000 0 0x80000>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 721>; + clock-names = "du.0", "du.1", "du.3"; + status = "disabled"; + + vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_hdmi0: endpoint { + remote-endpoint = <&dw_hdmi0_in>; + }; + }; + port@2 { + reg = <2>; + du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + }; + }; + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a774b1-lvds"; + reg = <0 0xfeb90000 0 0x14>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 727>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { + }; + }; + }; + }; + + prr: chipid@fff00044 { + compatible = "renesas,prr"; + reg = <0 0xfff00044 0 4>; + }; + }; + + thermal-zones { + sensor_thermal1: sensor-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 0>; + sustainable-power = <2439>; + + trips { + sensor1_crit: sensor1-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + sensor_thermal2: sensor-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 1>; + sustainable-power = <2439>; + + trips { + sensor2_crit: sensor2-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + sensor_thermal3: sensor-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 2>; + sustainable-power = <2439>; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&a57_0 0 2>; + contribution = <1024>; + }; + }; + trips { + target: trip-point1 { + temperature = <100000>; + hysteresis = <1000>; + type = "passive"; + }; + + sensor3_crit: sensor3-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + /* External USB clocks - can be overridden by the board */ + usb3s0_clk: usb3s0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index a1c2de90e470..c7bdc3606323 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -73,9 +73,11 @@ compatible = "arm,cortex-a53"; reg = <0>; device_type = "cpu"; + #cooling-cells = <2>; power-domains = <&sysc R8A774C0_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + dynamic-power-coefficient = <277>; clocks = <&cpg CPG_CORE R8A774C0_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -1905,18 +1907,30 @@ thermal-zones { cpu-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&thermal>; + polling-delay = <0>; + thermal-sensors = <&thermal 0>; + sustainable-power = <717>; cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&a53_0 0 2>; + contribution = <1024>; + }; }; trips { - cpu-crit { + sensor1_crit: sensor1-crit { temperature = <120000>; hysteresis = <2000>; type = "critical"; }; + + target: trip-point1 { + temperature = <100000>; + hysteresis = <2000>; + type = "passive"; + }; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi index e4650ae5b75a..14d8513d2a47 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi @@ -30,7 +30,7 @@ }; &du { - vsps = <&vspd0 &vspd1 &vspd2 &vspd3>; + vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd3 0>; }; &fcpvb1 { diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index 95deff66eeb6..fde6ec122d3b 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -155,6 +155,7 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; dynamic-power-coefficient = <854>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; @@ -169,6 +170,7 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU1>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; capacity-dmips-mhz = <1024>; @@ -182,6 +184,7 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU2>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; capacity-dmips-mhz = <1024>; @@ -195,6 +198,7 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU3>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; capacity-dmips-mhz = <1024>; @@ -208,6 +212,7 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; #cooling-cells = <2>; dynamic-power-coefficient = <277>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; @@ -222,6 +227,7 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU1>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; @@ -234,6 +240,7 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU2>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; @@ -246,6 +253,7 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU3>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; @@ -264,6 +272,28 @@ cache-unified; cache-level = <2>; }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <400>; + exit-latency-us = <500>; + min-residency-us = <4000>; + }; + + CPU_SLEEP_1: cpu-sleep-1 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <700>; + exit-latency-us = <700>; + min-residency-us = <5000>; + }; + }; }; extal_clk: extal { @@ -2569,6 +2599,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 314>; + iommus = <&ipmmu_ds1 32>; status = "disabled"; }; @@ -2581,6 +2612,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 313>; + iommus = <&ipmmu_ds1 33>; status = "disabled"; }; @@ -2593,6 +2625,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 312>; + iommus = <&ipmmu_ds1 34>; status = "disabled"; }; @@ -2605,6 +2638,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 311>; + iommus = <&ipmmu_ds1 35>; status = "disabled"; }; @@ -2909,6 +2943,42 @@ iommus = <&ipmmu_vi1 10>; }; + cmm0: cmm@fea40000 { + compatible = "renesas,r8a7795-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea40000 0 0x1000>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 711>; + resets = <&cpg 711>; + }; + + cmm1: cmm@fea50000 { + compatible = "renesas,r8a7795-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea50000 0 0x1000>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 710>; + resets = <&cpg 710>; + }; + + cmm2: cmm@fea60000 { + compatible = "renesas,r8a7795-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea60000 0 0x1000>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 709>; + resets = <&cpg 709>; + }; + + cmm3: cmm@fea70000 { + compatible = "renesas,r8a7795-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea70000 0 0x1000>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 708>; + resets = <&cpg 708>; + }; + csi20: csi2@fea80000 { compatible = "renesas,r8a7795-csi2"; reg = <0 0xfea80000 0 0x10000>; @@ -3112,7 +3182,10 @@ <&cpg CPG_MOD 722>, <&cpg CPG_MOD 721>; clock-names = "du.0", "du.1", "du.2", "du.3"; + + renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>, <&cmm3>; vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>; + status = "disabled"; ports { diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index 3dc9d73f589a..b9db882b0351 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -160,6 +160,7 @@ power-domains = <&sysc R8A7796_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; dynamic-power-coefficient = <854>; clocks = <&cpg CPG_CORE R8A7796_CLK_Z>; operating-points-v2 = <&cluster0_opp>; @@ -174,6 +175,7 @@ power-domains = <&sysc R8A7796_PD_CA57_CPU1>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&cpg CPG_CORE R8A7796_CLK_Z>; operating-points-v2 = <&cluster0_opp>; capacity-dmips-mhz = <1024>; @@ -187,6 +189,7 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; #cooling-cells = <2>; dynamic-power-coefficient = <277>; clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; @@ -201,6 +204,7 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU1>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; @@ -213,6 +217,7 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU2>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; @@ -225,6 +230,7 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU3>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; @@ -243,6 +249,28 @@ cache-unified; cache-level = <2>; }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <400>; + exit-latency-us = <500>; + min-residency-us = <4000>; + }; + + CPU_SLEEP_1: cpu-sleep-1 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <700>; + exit-latency-us = <700>; + min-residency-us = <5000>; + }; + }; }; extal_clk: extal { @@ -2366,6 +2394,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 314>; + iommus = <&ipmmu_ds1 32>; status = "disabled"; }; @@ -2378,6 +2407,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 313>; + iommus = <&ipmmu_ds1 33>; status = "disabled"; }; @@ -2390,6 +2420,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 312>; + iommus = <&ipmmu_ds1 34>; status = "disabled"; }; @@ -2402,6 +2433,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 311>; + iommus = <&ipmmu_ds1 35>; status = "disabled"; }; @@ -2613,6 +2645,33 @@ renesas,fcp = <&fcpvi0>; }; + cmm0: cmm@fea40000 { + compatible = "renesas,r8a7796-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea40000 0 0x1000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 711>; + resets = <&cpg 711>; + }; + + cmm1: cmm@fea50000 { + compatible = "renesas,r8a7796-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea50000 0 0x1000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 710>; + resets = <&cpg 710>; + }; + + cmm2: cmm@fea60000 { + compatible = "renesas,r8a7796-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea60000 0 0x1000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 709>; + resets = <&cpg 709>; + }; + csi20: csi2@fea80000 { compatible = "renesas,r8a7796-csi2"; reg = <0 0xfea80000 0 0x10000>; @@ -2763,9 +2822,11 @@ <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>; clock-names = "du.0", "du.1", "du.2"; - status = "disabled"; - vsps = <&vspd0 &vspd1 &vspd2>; + renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>; + vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>; + + status = "disabled"; ports { #address-cells = <1>; diff --git a/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts new file mode 100644 index 000000000000..4abd78ac1cd5 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Salvator-X 2nd version board with R-Car M3-W+ + * + * Copyright (C) 2018 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a77961.dtsi" +#include "salvator-xs.dtsi" + +/ { + model = "Renesas Salvator-X 2nd version board based on r8a77961"; + compatible = "renesas,salvator-xs", "renesas,r8a77961"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@400000000 { + device_type = "memory"; + reg = <0x4 0x80000000 0x0 0x80000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x1 0x00000000>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi new file mode 100644 index 000000000000..64466c86b698 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi @@ -0,0 +1,723 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the R-Car M3-W+ (R8A77961) SoC + * + * Copyright (C) 2016-2017 Renesas Electronics Corp. + */ + +#include <dt-bindings/clock/r8a77961-cpg-mssr.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/r8a77961-sysc.h> + +#define CPG_AUDIO_CLK_I R8A77961_CLK_S0D4 + +/ { + compatible = "renesas,r8a77961"; + #address-cells = <2>; + #size-cells = <2>; + + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + cluster0_opp: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <900000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + opp-1700000000 { + opp-hz = /bits/ 64 <1700000000>; + opp-microvolt = <900000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <960000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + }; + + cluster1_opp: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&a57_0>; + }; + core1 { + cpu = <&a57_1>; + }; + }; + + cluster1 { + core0 { + cpu = <&a53_0>; + }; + core1 { + cpu = <&a53_1>; + }; + core2 { + cpu = <&a53_2>; + }; + core3 { + cpu = <&a53_3>; + }; + }; + }; + + a57_0: cpu@0 { + compatible = "arm,cortex-a57"; + reg = <0x0>; + device_type = "cpu"; + power-domains = <&sysc R8A77961_PD_CA57_CPU0>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + dynamic-power-coefficient = <854>; + clocks = <&cpg CPG_CORE R8A77961_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; + }; + + a57_1: cpu@1 { + compatible = "arm,cortex-a57"; + reg = <0x1>; + device_type = "cpu"; + power-domains = <&sysc R8A77961_PD_CA57_CPU1>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&cpg CPG_CORE R8A77961_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; + }; + + a53_0: cpu@100 { + compatible = "arm,cortex-a53"; + reg = <0x100>; + device_type = "cpu"; + power-domains = <&sysc R8A77961_PD_CA53_CPU0>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; + #cooling-cells = <2>; + dynamic-power-coefficient = <277>; + clocks = <&cpg CPG_CORE R8A77961_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <535>; + }; + + a53_1: cpu@101 { + compatible = "arm,cortex-a53"; + reg = <0x101>; + device_type = "cpu"; + power-domains = <&sysc R8A77961_PD_CA53_CPU1>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; + clocks = <&cpg CPG_CORE R8A77961_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <535>; + }; + + a53_2: cpu@102 { + compatible = "arm,cortex-a53"; + reg = <0x102>; + device_type = "cpu"; + power-domains = <&sysc R8A77961_PD_CA53_CPU2>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; + clocks = <&cpg CPG_CORE R8A77961_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <535>; + }; + + a53_3: cpu@103 { + compatible = "arm,cortex-a53"; + reg = <0x103>; + device_type = "cpu"; + power-domains = <&sysc R8A77961_PD_CA53_CPU3>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; + clocks = <&cpg CPG_CORE R8A77961_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <535>; + }; + + L2_CA57: cache-controller-0 { + compatible = "cache"; + power-domains = <&sysc R8A77961_PD_CA57_SCU>; + cache-unified; + cache-level = <2>; + }; + + L2_CA53: cache-controller-1 { + compatible = "cache"; + power-domains = <&sysc R8A77961_PD_CA53_SCU>; + cache-unified; + cache-level = <2>; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <400>; + exit-latency-us = <500>; + min-residency-us = <4000>; + }; + + CPU_SLEEP_1: cpu-sleep-1 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <700>; + exit-latency-us = <700>; + min-residency-us = <5000>; + }; + }; + }; + + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + extalr_clk: extalr { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>; + }; + + pmu_a57 { + compatible = "arm,cortex-a57-pmu"; + interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a57_0>, <&a57_1>; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + rwdt: watchdog@e6020000 { + reg = <0 0xe6020000 0 0x0c>; + /* placeholder */ + }; + + gpio2: gpio@e6052000 { + reg = <0 0xe6052000 0 0x50>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + /* placeholder */ + }; + + gpio3: gpio@e6053000 { + reg = <0 0xe6053000 0 0x50>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + /* placeholder */ + }; + + gpio4: gpio@e6054000 { + reg = <0 0xe6054000 0 0x50>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + /* placeholder */ + }; + + gpio5: gpio@e6055000 { + reg = <0 0xe6055000 0 0x50>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + /* placeholder */ + }; + + gpio6: gpio@e6055400 { + reg = <0 0xe6055400 0 0x50>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + /* placeholder */ + }; + + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a77961"; + reg = <0 0xe6060000 0 0x50c>; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a77961-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&extalr_clk>; + clock-names = "extal", "extalr"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a77961-rst"; + reg = <0 0xe6160000 0 0x0200>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a77961-sysc"; + reg = <0 0xe6180000 0 0x0400>; + #power-domain-cells = <1>; + }; + + intc_ex: interrupt-controller@e61c0000 { + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + /* placeholder */ + }; + + i2c2: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0xe6510000 0 0x40>; + /* placeholder */ + }; + + i2c4: i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0xe66d8000 0 0x40>; + /* placeholder */ + }; + + i2c_dvfs: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0xe60b0000 0 0x425>; + /* placeholder */ + }; + + hscif1: serial@e6550000 { + reg = <0 0xe6550000 0 0x60>; + /* placeholder */ + }; + + hsusb: usb@e6590000 { + reg = <0 0xe6590000 0 0x200>; + /* placeholder */ + }; + + usb3_phy0: usb-phy@e65ee000 { + reg = <0 0xe65ee000 0 0x90>; + #phy-cells = <0>; + /* placeholder */ + }; + + avb: ethernet@e6800000 { + reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + /* placeholder */ + }; + + pwm1: pwm@e6e31000 { + reg = <0 0xe6e31000 0 8>; + #pwm-cells = <2>; + /* placeholder */ + }; + + scif1: serial@e6e68000 { + reg = <0 0xe6e68000 0 64>; + /* placeholder */ + }; + + scif2: serial@e6e88000 { + compatible = "renesas,scif-r8a77961", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e88000 0 64>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 310>, + <&cpg CPG_CORE R8A77961_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 310>; + status = "disabled"; + }; + + vin0: video@e6ef0000 { + reg = <0 0xe6ef0000 0 0x1000>; + /* placeholder */ + }; + + vin1: video@e6ef1000 { + reg = <0 0xe6ef1000 0 0x1000>; + /* placeholder */ + }; + + vin2: video@e6ef2000 { + reg = <0 0xe6ef2000 0 0x1000>; + /* placeholder */ + }; + + vin3: video@e6ef3000 { + reg = <0 0xe6ef3000 0 0x1000>; + /* placeholder */ + }; + + vin4: video@e6ef4000 { + reg = <0 0xe6ef4000 0 0x1000>; + /* placeholder */ + }; + + vin5: video@e6ef5000 { + reg = <0 0xe6ef5000 0 0x1000>; + /* placeholder */ + }; + + vin6: video@e6ef6000 { + reg = <0 0xe6ef6000 0 0x1000>; + /* placeholder */ + }; + + vin7: video@e6ef7000 { + reg = <0 0xe6ef7000 0 0x1000>; + /* placeholder */ + }; + + rcar_sound: sound@ec500000 { + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ + /* placeholder */ + rcar_sound,dvc { + dvc0: dvc-0 { }; + dvc1: dvc-1 { }; + }; + + rcar_sound,src { + src0: src-0 { }; + src1: src-1 { }; + }; + + rcar_sound,ssi { + ssi0: ssi-0 { }; + ssi1: ssi-1 { }; + }; + }; + + xhci0: usb@ee000000 { + reg = <0 0xee000000 0 0xc00>; + /* placeholder */ + }; + + usb3_peri0: usb@ee020000 { + reg = <0 0xee020000 0 0x400>; + /* placeholder */ + }; + + ohci0: usb@ee080000 { + reg = <0 0xee080000 0 0x100>; + /* placeholder */ + }; + + ohci1: usb@ee0a0000 { + reg = <0 0xee0a0000 0 0x100>; + /* placeholder */ + }; + + ehci0: usb@ee080100 { + reg = <0 0xee080100 0 0x100>; + /* placeholder */ + }; + + ehci1: usb@ee0a0100 { + reg = <0 0xee0a0100 0 0x100>; + /* placeholder */ + }; + + usb2_phy0: usb-phy@ee080200 { + reg = <0 0xee080200 0 0x700>; + /* placeholder */ + }; + + usb2_phy1: usb-phy@ee0a0200 { + reg = <0 0xee0a0200 0 0x700>; + /* placeholder */ + }; + + sdhi0: sd@ee100000 { + reg = <0 0xee100000 0 0x2000>; + /* placeholder */ + }; + + sdhi2: sd@ee140000 { + reg = <0 0xee140000 0 0x2000>; + /* placeholder */ + }; + + sdhi3: sd@ee160000 { + reg = <0 0xee160000 0 0x2000>; + /* placeholder */ + }; + + gic: interrupt-controller@f1010000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xf1010000 0 0x1000>, + <0x0 0xf1020000 0 0x20000>, + <0x0 0xf1040000 0 0x20000>, + <0x0 0xf1060000 0 0x20000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 408>; + }; + + pciec0: pcie@fe000000 { + reg = <0 0xfe000000 0 0x80000>; + /* placeholder */ + }; + + pciec1: pcie@ee800000 { + reg = <0 0xee800000 0 0x80000>; + /* placeholder */ + }; + + csi20: csi2@fea80000 { + reg = <0 0xfea80000 0 0x10000>; + /* placeholder */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + + csi40: csi2@feaa0000 { + reg = <0 0xfeaa0000 0 0x10000>; + /* placeholder */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + }; + }; + }; + + hdmi0: hdmi@fead0000 { + reg = <0 0xfead0000 0 0x10000>; + /* placeholder */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + }; + port@1 { + reg = <1>; + }; + port@2 { + /* HDMI sound */ + reg = <2>; + }; + }; + }; + + du: display@feb00000 { + reg = <0 0xfeb00000 0 0x70000>; + /* placeholder */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_hdmi0: endpoint { + }; + }; + port@2 { + reg = <2>; + du_out_lvds0: endpoint { + }; + }; + }; + }; + + prr: chipid@fff00044 { + compatible = "renesas,prr"; + reg = <0 0xfff00044 0 4>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + }; + + /* External USB clocks - can be overridden by the board */ + usb3s0_clk: usb3s0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index 4ae163220f60..bdbe197774d2 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -2105,6 +2105,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 314>; + iommus = <&ipmmu_ds1 32>; status = "disabled"; }; @@ -2117,6 +2118,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 313>; + iommus = <&ipmmu_ds1 33>; status = "disabled"; }; @@ -2129,6 +2131,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 312>; + iommus = <&ipmmu_ds1 34>; status = "disabled"; }; @@ -2141,6 +2144,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 311>; + iommus = <&ipmmu_ds1 35>; status = "disabled"; }; @@ -2320,6 +2324,33 @@ resets = <&cpg 611>; }; + cmm0: cmm@fea40000 { + compatible = "renesas,r8a77965-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea40000 0 0x1000>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 711>; + resets = <&cpg 711>; + }; + + cmm1: cmm@fea50000 { + compatible = "renesas,r8a77965-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea50000 0 0x1000>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 710>; + resets = <&cpg 710>; + }; + + cmm3: cmm@fea70000 { + compatible = "renesas,r8a77965-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea70000 0 0x1000>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 708>; + resets = <&cpg 708>; + }; + csi20: csi2@fea80000 { compatible = "renesas,r8a77965-csi2"; reg = <0 0xfea80000 0 0x10000>; @@ -2467,10 +2498,12 @@ <&cpg CPG_MOD 723>, <&cpg CPG_MOD 721>; clock-names = "du.0", "du.1", "du.3"; - status = "disabled"; + renesas,cmms = <&cmm0>, <&cmm1>, <&cmm3>; vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>; + status = "disabled"; + ports { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi index 0cd3b376635d..0d0558e53533 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi @@ -652,7 +652,7 @@ }; pwm3: pwm@e6e33000 { - compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + compatible = "renesas,pwm-r8a77970", "renesas,pwm-rcar"; reg = <0 0xe6e33000 0 8>; #pwm-cells = <2>; clocks = <&cpg CPG_MOD 523>; @@ -1035,6 +1035,7 @@ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 314>; max-frequency = <200000000>; + iommus = <&ipmmu_ds1 32>; status = "disabled"; }; @@ -1120,7 +1121,7 @@ clock-names = "du.0"; power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 724>; - vsps = <&vspd0>; + vsps = <&vspd0 0>; status = "disabled"; ports { diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi index 461a47ea656d..4d86669af819 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi @@ -1338,6 +1338,7 @@ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 314>; max-frequency = <200000000>; + iommus = <&ipmmu_ds1 32>; status = "disabled"; }; @@ -1495,7 +1496,7 @@ clock-names = "du.0"; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 724>; - vsps = <&vspd0>; + vsps = <&vspd0 0>; status = "disabled"; ports { diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index 455954c3d98e..67a6824a962c 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -1580,6 +1580,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 314>; + iommus = <&ipmmu_ds1 32>; status = "disabled"; }; @@ -1592,6 +1593,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 313>; + iommus = <&ipmmu_ds1 33>; status = "disabled"; }; @@ -1604,6 +1606,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 311>; + iommus = <&ipmmu_ds1 35>; status = "disabled"; }; @@ -1727,6 +1730,24 @@ iommus = <&ipmmu_vi0 9>; }; + cmm0: cmm@fea40000 { + compatible = "renesas,r8a77990-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea40000 0 0x1000>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 711>; + resets = <&cpg 711>; + }; + + cmm1: cmm@fea50000 { + compatible = "renesas,r8a77990-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea50000 0 0x1000>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 710>; + resets = <&cpg 710>; + }; + csi40: csi2@feaa0000 { compatible = "renesas,r8a77990-csi2"; reg = <0 0xfeaa0000 0 0x10000>; @@ -1768,7 +1789,10 @@ clock-names = "du.0", "du.1"; resets = <&cpg 724>; reset-names = "du.0"; + + renesas,cmms = <&cmm0>, <&cmm1>; vsps = <&vspd0 0>, <&vspd1 0>; + status = "disabled"; ports { diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index 183fef86cf7c..e6ee2b709ba6 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -916,6 +916,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; resets = <&cpg 312>; + iommus = <&ipmmu_ds1 34>; status = "disabled"; }; @@ -993,6 +994,24 @@ iommus = <&ipmmu_vi0 9>; }; + cmm0: cmm@fea40000 { + compatible = "renesas,r8a77995-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea40000 0 0x1000>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 711>; + resets = <&cpg 711>; + }; + + cmm1: cmm@fea50000 { + compatible = "renesas,r8a77995-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea50000 0 0x1000>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 710>; + resets = <&cpg 710>; + }; + du: display@feb00000 { compatible = "renesas,du-r8a77995"; reg = <0 0xfeb00000 0 0x40000>; @@ -1003,7 +1022,10 @@ clock-names = "du.0", "du.1"; resets = <&cpg 724>; reset-names = "du.0"; + + renesas,cmms = <&cmm0>, <&cmm1>; vsps = <&vspd0 0>, <&vspd1 0>; + status = "disabled"; ports { diff --git a/arch/arm64/boot/dts/renesas/rzg2-advantech-idk-1110wr-panel.dtsi b/arch/arm64/boot/dts/renesas/rzg2-advantech-idk-1110wr-panel.dtsi new file mode 100644 index 000000000000..bcc21178ae04 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/rzg2-advantech-idk-1110wr-panel.dtsi @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Advantech idk-1110wr LVDS panel connected + * to RZ/G2 boards + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +/ { + panel-lvds { + compatible = "advantech,idk-1110wr", "panel-lvds"; + + width-mm = <223>; + height-mm = <125>; + + data-mapping = "jeida-24"; + + panel-timing { + /* 1024x600 @60Hz */ + clock-frequency = <51200000>; + hactive = <1024>; + vactive = <600>; + hsync-len = <240>; + hfront-porch = <40>; + hback-porch = <40>; + vfront-porch = <15>; + vback-porch = <10>; + vsync-len = <10>; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds_connector>; + }; + }; + }; +}; + +&lvds_connector { + remote-endpoint = <&panel_in>; +}; diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts index 6eb7407a84aa..1185a314ba4a 100644 --- a/arch/arm64/boot/dts/rockchip/px30-evb.dts +++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts @@ -14,7 +14,7 @@ compatible = "rockchip,px30-evb", "rockchip,px30"; chosen { - stdout-path = "serial2:1500000n8"; + stdout-path = "serial5:115200n8"; }; adc-keys { @@ -58,6 +58,14 @@ backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm1 0 25000 0>; + power-supply = <&vcc3v3_lcd>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + pinctrl-0 = <&emmc_reset>; + pinctrl-names = "default"; + reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>; }; sdio_pwrseq: sdio-pwrseq { @@ -74,13 +82,6 @@ reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO3_A4 */ }; - vcc_phy: vcc-phy-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_phy"; - regulator-always-on; - regulator-boot-on; - }; - vcc5v0_sys: vccsys { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; @@ -91,6 +92,22 @@ }; }; +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + &display_subsystem { status = "okay"; }; @@ -100,12 +117,15 @@ cap-mmc-highspeed; mmc-hs200-1_8v; non-removable; + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v0>; + vqmmc-supply = <&vccio_flash>; status = "okay"; }; &gmac { clock_in_out = "output"; - phy-supply = <&vcc_phy>; + phy-supply = <&vcc_rmii>; snps,reset-gpio = <&gpio2 13 GPIO_ACTIVE_LOW>; snps,reset-active-low; snps,reset-delays-us = <0 50000 50000>; @@ -114,6 +134,256 @@ &i2c0 { status = "okay"; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <0>; + clock-output-names = "xin32k"; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc5v0_sys>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-name = "vdd_log"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v0: vcc_rmii: DCDC_REG4 { + regulator-name = "vcc_3v0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_sys: DCDC_REG5 { + regulator-name = "vcc3v3_sys"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v0: LDO_REG1 { + regulator-name = "vcc_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_1v8: vccio_flash: vccio_sdio: LDO_REG2 { + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_1v0: LDO_REG3 { + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc3v0_pmu: LDO_REG4 { + regulator-name = "vcc3v0_pmu"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_sd: LDO_REG6 { + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc2v8_dvp: LDO_REG7 { + regulator-name = "vcc2v8_dvp"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <2800000>; + }; + }; + + vcc1v8_dvp: LDO_REG8 { + regulator-name = "vcc1v8_dvp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v5_dvp: LDO_REG9 { + regulator-name = "vcc1v5_dvp"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcc3v3_lcd: SWITCH_REG1 { + regulator-name = "vcc3v3_lcd"; + regulator-boot-on; + }; + + vcc5v0_host: SWITCH_REG2 { + regulator-name = "vcc5v0_host"; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; + + sensor@d { + compatible = "asahi-kasei,ak8963"; + reg = <0x0d>; + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + vdd-supply = <&vcc3v0_pmu>; + mount-matrix = "1", /* x0 */ + "0", /* y0 */ + "0", /* z0 */ + "0", /* x1 */ + "1", /* y1 */ + "0", /* z1 */ + "0", /* x2 */ + "0", /* y2 */ + "1"; /* z2 */ + }; + + touchscreen@14 { + compatible = "goodix,gt1151"; + reg = <0x14>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>; + irq-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; + VDDIO-supply = <&vcc3v3_lcd>; + }; + + sensor@4c { + compatible = "fsl,mma7660"; + reg = <0x4c>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB7 IRQ_TYPE_LEVEL_LOW>; + }; }; &i2s1_2ch { @@ -122,6 +392,13 @@ &io_domains { status = "okay"; + + vccio1-supply = <&vccio_sdio>; + vccio2-supply = <&vccio_sd>; + vccio3-supply = <&vcc_3v0>; + vccio4-supply = <&vcc3v0_pmu>; + vccio5-supply = <&vcc_3v0>; + vccio6-supply = <&vccio_flash>; }; &pinctrl { @@ -132,6 +409,12 @@ }; }; + emmc { + emmc_reset: emmc-reset { + rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int: pmic_int { rockchip,pins = @@ -164,6 +447,9 @@ &pmu_io_domains { status = "okay"; + + pmuio1-supply = <&vcc3v0_pmu>; + pmuio2-supply = <&vcc3v0_pmu>; }; &pwm1 { @@ -171,6 +457,7 @@ }; &saradc { + vref-supply = <&vcc_1v8>; status = "okay"; }; @@ -183,6 +470,8 @@ sd-uhs-sdr25; sd-uhs-sdr50; sd-uhs-sdr104; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; status = "okay"; }; @@ -202,7 +491,7 @@ status = "okay"; }; -&uart2 { +&uart5 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi index eb992d60e6ba..9ad1c2f04ea9 100644 --- a/arch/arm64/boot/dts/rockchip/px30.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -195,13 +195,6 @@ clock-output-names = "xin24m"; }; - xin32k: xin32k { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "xin32k"; - }; - pmu: power-management@ff000000 { compatible = "rockchip,px30-pmu", "syscon", "simple-mfd"; reg = <0x0 0xff000000 0x0 0x1000>; @@ -674,33 +667,38 @@ cru: clock-controller@ff2b0000 { compatible = "rockchip,px30-cru"; reg = <0x0 0xff2b0000 0x0 0x1000>; + clocks = <&xin24m>, <&pmucru PLL_GPLL>; + clock-names = "xin24m", "gpll"; rockchip,grf = <&grf>; #clock-cells = <1>; #reset-cells = <1>; - assigned-clocks = <&cru PLL_NPLL>; - assigned-clock-rates = <1188000000>; + assigned-clocks = <&cru PLL_NPLL>, + <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>, + <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>, + <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>; + + assigned-clock-rates = <1188000000>, + <200000000>, <200000000>, + <150000000>, <150000000>, + <100000000>, <200000000>; }; pmucru: clock-controller@ff2bc000 { compatible = "rockchip,px30-pmucru"; reg = <0x0 0xff2bc000 0x0 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; rockchip,grf = <&grf>; #clock-cells = <1>; #reset-cells = <1>; assigned-clocks = <&pmucru PLL_GPLL>, <&pmucru PCLK_PMU_PRE>, - <&pmucru SCLK_WIFI_PMU>, <&cru ARMCLK>, - <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>, - <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>, - <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>; + <&pmucru SCLK_WIFI_PMU>; assigned-clock-rates = <1200000000>, <100000000>, - <26000000>, <600000000>, - <200000000>, <200000000>, - <150000000>, <150000000>, - <100000000>, <200000000>; + <26000000>; }; usb20_otg: usb@ff300000 { @@ -801,6 +799,8 @@ clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; fifo-depth = <0x100>; max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; power-domains = <&power PX30_PD_MMC_NAND>; status = "disabled"; }; @@ -831,7 +831,7 @@ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vopb_mmu"; clocks = <&cru ACLK_VOPB>, <&cru HCLK_VOPB>; - clock-names = "aclk", "hclk"; + clock-names = "aclk", "iface"; power-domains = <&power PX30_PD_VO>; #iommu-cells = <0>; status = "disabled"; @@ -863,7 +863,7 @@ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vopl_mmu"; clocks = <&cru ACLK_VOPL>, <&cru HCLK_VOPL>; - clock-names = "aclk", "hclk"; + clock-names = "aclk", "iface"; power-domains = <&power PX30_PD_VO>; #iommu-cells = <0>; status = "disabled"; @@ -1164,11 +1164,6 @@ rockchip,pins = <0 RK_PB5 1 &pcfg_pull_none>; }; - - uart0_rts_gpio: uart0-rts-gpio { - rockchip,pins = - <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; }; uart1 { @@ -1187,11 +1182,6 @@ rockchip,pins = <1 RK_PC3 1 &pcfg_pull_none>; }; - - uart1_rts_gpio: uart1-rts-gpio { - rockchip,pins = - <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; - }; }; uart2-m0 { @@ -1226,11 +1216,6 @@ rockchip,pins = <0 RK_PC3 2 &pcfg_pull_none>; }; - - uart3m0_rts_gpio: uart3m0-rts-gpio { - rockchip,pins = - <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; - }; }; uart3-m1 { @@ -1249,11 +1234,6 @@ rockchip,pins = <1 RK_PB5 2 &pcfg_pull_none>; }; - - uart3m1_rts_gpio: uart3m1-rts-gpio { - rockchip,pins = - <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; }; uart4 { @@ -1602,16 +1582,6 @@ <1 RK_PD4 1 &pcfg_pull_up_8ma>, <1 RK_PD5 1 &pcfg_pull_up_8ma>; }; - - sdmmc_gpio: sdmmc-gpio { - rockchip,pins = - <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up_4ma>, - <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up_4ma>, - <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up_4ma>, - <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up_4ma>, - <1 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up_4ma>, - <1 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up_4ma>; - }; }; sdio { @@ -1632,16 +1602,6 @@ <1 RK_PD0 1 &pcfg_pull_up>, <1 RK_PD1 1 &pcfg_pull_up>; }; - - sdio_gpio: sdio-gpio { - rockchip,pins = - <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; - }; }; emmc { @@ -1655,11 +1615,6 @@ <1 RK_PB2 2 &pcfg_pull_up_8ma>; }; - emmc_pwren: emmc-pwren { - rockchip,pins = - <1 RK_PB0 2 &pcfg_pull_none>; - }; - emmc_rstnout: emmc-rstnout { rockchip,pins = <1 RK_PB3 2 &pcfg_pull_none>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts index a9f4d6d7d2b7..9dd3b171e91d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts @@ -68,6 +68,16 @@ &spi0 { status = "okay"; + + cr50@0 { + compatible = "google,cr50"; + reg = <0>; + interrupt-parent = <&gpio0>; + interrupts = <5 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&h1_int_od_l>; + spi-max-frequency = <800000>; + }; }; &pinctrl { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi index 50dfab51f175..4373ed732af7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi @@ -436,6 +436,16 @@ camera: &i2c7 { &spi2 { status = "okay"; + + cr50@0 { + compatible = "google,cr50"; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <17 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&h1_int_od_l>; + spi-max-frequency = <800000>; + }; }; &usb_host0_ohci { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi index dd16c80d923e..b788ae4f47f0 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi @@ -152,9 +152,6 @@ phy-handle = <&rtl8211e>; phy-mode = "rgmii"; phy-supply = <&vcc3v3_s3>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 30000>; - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; tx_delay = <0x28>; rx_delay = <0x11>; status = "okay"; @@ -168,6 +165,9 @@ reg = <1>; interrupt-parent = <&gpio3>; interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; }; }; }; @@ -184,6 +184,10 @@ status = "okay"; }; +&hdmi_sound { + status = "okay"; +}; + &i2c0 { clock-frequency = <400000>; i2c-scl-rising-time-ns = <160>; @@ -459,6 +463,10 @@ status = "okay"; }; +&i2s2 { + status = "okay"; +}; + &io_domains { bt656-supply = <&vcc_1v8>; audio-supply = <&vcca1v8_codec>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts index 19f7732d728c..257543d069d8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts @@ -57,9 +57,9 @@ * should be placed inside mp8859, but not until mp8859 has * its own dt-binding. */ - vcc12v_sys: mp8859-dcdc1 { + dc_12v: mp8859-dcdc1 { compatible = "regulator-fixed"; - regulator-name = "vcc12v_sys"; + regulator-name = "dc_12v"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <12000000>; @@ -85,7 +85,7 @@ regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - vin-supply = <&vcc12v_sys>; + vin-supply = <&vcc_sys>; }; /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ @@ -118,7 +118,7 @@ regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_sys>; + vin-supply = <&dc_12v>; }; vdd_log: vdd-log { @@ -129,7 +129,7 @@ regulator-boot-on; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; - vin-supply = <&vcc3v3_sys>; + vin-supply = <&vcc_sys>; }; }; @@ -202,16 +202,16 @@ rockchip,system-power-controller; wakeup-source; - vcc1-supply = <&vcc3v3_sys>; - vcc2-supply = <&vcc3v3_sys>; - vcc3-supply = <&vcc3v3_sys>; - vcc4-supply = <&vcc3v3_sys>; - vcc6-supply = <&vcc3v3_sys>; - vcc7-supply = <&vcc3v3_sys>; + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc3v3_sys>; - vcc10-supply = <&vcc3v3_sys>; - vcc11-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc_sys>; + vcc10-supply = <&vcc_sys>; + vcc11-supply = <&vcc_sys>; vcc12-supply = <&vcc3v3_sys>; vddio-supply = <&vcc1v8_pmu>; @@ -385,7 +385,7 @@ regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on; - vin-supply = <&vcc3v3_sys>; + vin-supply = <&vcc_sys>; regulator-state-mem { regulator-off-in-suspend; @@ -404,7 +404,7 @@ regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on; - vin-supply = <&vcc3v3_sys>; + vin-supply = <&vcc_sys>; regulator-state-mem { regulator-off-in-suspend; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts index 1ae1ebd4efdd..188d9dfc297b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts @@ -486,21 +486,18 @@ sdio0 { sdio0_bus4: sdio0-bus4 { - rockchip,pins = - <2 20 RK_FUNC_1 &pcfg_pull_up_20ma>, - <2 21 RK_FUNC_1 &pcfg_pull_up_20ma>, - <2 22 RK_FUNC_1 &pcfg_pull_up_20ma>, - <2 23 RK_FUNC_1 &pcfg_pull_up_20ma>; + rockchip,pins = <2 RK_PC4 1 &pcfg_pull_up_20ma>, + <2 RK_PC5 1 &pcfg_pull_up_20ma>, + <2 RK_PC6 1 &pcfg_pull_up_20ma>, + <2 RK_PC7 1 &pcfg_pull_up_20ma>; }; sdio0_cmd: sdio0-cmd { - rockchip,pins = - <2 24 RK_FUNC_1 &pcfg_pull_up_20ma>; + rockchip,pins = <2 RK_PD0 1 &pcfg_pull_up_20ma>; }; sdio0_clk: sdio0-clk { - rockchip,pins = - <2 25 RK_FUNC_1 &pcfg_pull_none_20ma>; + rockchip,pins = <2 RK_PD1 1 &pcfg_pull_none_20ma>; }; }; @@ -532,8 +529,7 @@ wifi { wifi_enable_h: wifi-enable-h { - rockchip,pins = - <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; }; wifi_host_wake_l: wifi-host-wake-l { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts index 0401d4ec1f45..8b1e6382b140 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts @@ -81,6 +81,12 @@ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; }; + sound { + compatible = "audio-graph-card"; + label = "rockchip,rk3399"; + dais = <&i2s1_p0>; + }; + vcc12v_dcin: vcc12v-dcin { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin"; @@ -470,6 +476,20 @@ i2c-scl-rising-time-ns = <300>; i2c-scl-falling-time-ns = <15>; status = "okay"; + + es8316: codec@11 { + compatible = "everest,es8316"; + reg = <0x11>; + clocks = <&cru SCLK_I2S_8CH_OUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + + port { + es8316_p0_0: endpoint { + remote-endpoint = <&i2s1_p0_0>; + }; + }; + }; }; &i2c3 { @@ -505,6 +525,14 @@ rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; status = "okay"; + + i2s1_p0: port { + i2s1_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&es8316_p0_0>; + }; + }; }; &i2s2 { diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index cede1ad81be2..e62ea0e2b657 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -520,6 +520,7 @@ its: interrupt-controller@fee20000 { compatible = "arm,gic-v3-its"; msi-controller; + #msi-cells = <1>; reg = <0x0 0xfee20000 0x0 0x20000>; }; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 8e05c39eab08..c9a867ac32d4 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -723,7 +723,7 @@ CONFIG_TEGRA_IOMMU_SMMU=y CONFIG_ARM_SMMU=y CONFIG_ARM_SMMU_V3=y CONFIG_QCOM_IOMMU=y -CONFIG_REMOTEPROC=m +CONFIG_REMOTEPROC=y CONFIG_QCOM_Q6V5_MSS=m CONFIG_QCOM_Q6V5_PAS=m CONFIG_QCOM_SYSMON=m diff --git a/arch/arm64/include/asm/kvm_hyp.h b/arch/arm64/include/asm/kvm_hyp.h index 86825aa20852..97f21cc66657 100644 --- a/arch/arm64/include/asm/kvm_hyp.h +++ b/arch/arm64/include/asm/kvm_hyp.h @@ -47,30 +47,6 @@ #define read_sysreg_el2(r) read_sysreg_elx(r, _EL2, _EL1) #define write_sysreg_el2(v,r) write_sysreg_elx(v, r, _EL2, _EL1) -/** - * hyp_alternate_select - Generates patchable code sequences that are - * used to switch between two implementations of a function, depending - * on the availability of a feature. - * - * @fname: a symbol name that will be defined as a function returning a - * function pointer whose type will match @orig and @alt - * @orig: A pointer to the default function, as returned by @fname when - * @cond doesn't hold - * @alt: A pointer to the alternate function, as returned by @fname - * when @cond holds - * @cond: a CPU feature (as described in asm/cpufeature.h) - */ -#define hyp_alternate_select(fname, orig, alt, cond) \ -typeof(orig) * __hyp_text fname(void) \ -{ \ - typeof(alt) *val = orig; \ - asm volatile(ALTERNATIVE("nop \n", \ - "mov %0, %1 \n", \ - cond) \ - : "+r" (val) : "r" (alt)); \ - return val; \ -} - int __vgic_v2_perform_cpuif_access(struct kvm_vcpu *vcpu); void __vgic_v3_save_state(struct kvm_vcpu *vcpu); diff --git a/arch/arm64/include/asm/xen/xen-ops.h b/arch/arm64/include/asm/xen/xen-ops.h deleted file mode 100644 index e6e784051932..000000000000 --- a/arch/arm64/include/asm/xen/xen-ops.h +++ /dev/null @@ -1,7 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_XEN_OPS_H -#define _ASM_XEN_OPS_H - -void xen_efi_runtime_setup(void); - -#endif /* _ASM_XEN_OPS_H */ diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c index bd978ad71936..3d3815020e36 100644 --- a/arch/arm64/kvm/hyp/switch.c +++ b/arch/arm64/kvm/hyp/switch.c @@ -229,20 +229,6 @@ static void __hyp_text __hyp_vgic_restore_state(struct kvm_vcpu *vcpu) } } -static bool __hyp_text __true_value(void) -{ - return true; -} - -static bool __hyp_text __false_value(void) -{ - return false; -} - -static hyp_alternate_select(__check_arm_834220, - __false_value, __true_value, - ARM64_WORKAROUND_834220); - static bool __hyp_text __translate_far_to_hpfar(u64 far, u64 *hpfar) { u64 par, tmp; @@ -298,7 +284,8 @@ static bool __hyp_text __populate_fault_info(struct kvm_vcpu *vcpu) * resolve the IPA using the AT instruction. */ if (!(esr & ESR_ELx_S1PTW) && - (__check_arm_834220()() || (esr & ESR_ELx_FSC_TYPE) == FSC_PERM)) { + (cpus_have_const_cap(ARM64_WORKAROUND_834220) || + (esr & ESR_ELx_FSC_TYPE) == FSC_PERM)) { if (!__translate_far_to_hpfar(far, &hpfar)) return false; } else { diff --git a/arch/arm64/kvm/hyp/tlb.c b/arch/arm64/kvm/hyp/tlb.c index c466060b76d6..eb0efc5557f3 100644 --- a/arch/arm64/kvm/hyp/tlb.c +++ b/arch/arm64/kvm/hyp/tlb.c @@ -67,10 +67,14 @@ static void __hyp_text __tlb_switch_to_guest_nvhe(struct kvm *kvm, isb(); } -static hyp_alternate_select(__tlb_switch_to_guest, - __tlb_switch_to_guest_nvhe, - __tlb_switch_to_guest_vhe, - ARM64_HAS_VIRT_HOST_EXTN); +static void __hyp_text __tlb_switch_to_guest(struct kvm *kvm, + struct tlb_inv_context *cxt) +{ + if (has_vhe()) + __tlb_switch_to_guest_vhe(kvm, cxt); + else + __tlb_switch_to_guest_nvhe(kvm, cxt); +} static void __hyp_text __tlb_switch_to_host_vhe(struct kvm *kvm, struct tlb_inv_context *cxt) @@ -98,10 +102,14 @@ static void __hyp_text __tlb_switch_to_host_nvhe(struct kvm *kvm, write_sysreg(0, vttbr_el2); } -static hyp_alternate_select(__tlb_switch_to_host, - __tlb_switch_to_host_nvhe, - __tlb_switch_to_host_vhe, - ARM64_HAS_VIRT_HOST_EXTN); +static void __hyp_text __tlb_switch_to_host(struct kvm *kvm, + struct tlb_inv_context *cxt) +{ + if (has_vhe()) + __tlb_switch_to_host_vhe(kvm, cxt); + else + __tlb_switch_to_host_nvhe(kvm, cxt); +} void __hyp_text __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa) { @@ -111,7 +119,7 @@ void __hyp_text __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa) /* Switch to requested VMID */ kvm = kern_hyp_va(kvm); - __tlb_switch_to_guest()(kvm, &cxt); + __tlb_switch_to_guest(kvm, &cxt); /* * We could do so much better if we had the VA as well. @@ -154,7 +162,7 @@ void __hyp_text __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa) if (!has_vhe() && icache_is_vpipt()) __flush_icache_all(); - __tlb_switch_to_host()(kvm, &cxt); + __tlb_switch_to_host(kvm, &cxt); } void __hyp_text __kvm_tlb_flush_vmid(struct kvm *kvm) @@ -165,13 +173,13 @@ void __hyp_text __kvm_tlb_flush_vmid(struct kvm *kvm) /* Switch to requested VMID */ kvm = kern_hyp_va(kvm); - __tlb_switch_to_guest()(kvm, &cxt); + __tlb_switch_to_guest(kvm, &cxt); __tlbi(vmalls12e1is); dsb(ish); isb(); - __tlb_switch_to_host()(kvm, &cxt); + __tlb_switch_to_host(kvm, &cxt); } void __hyp_text __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu) @@ -180,13 +188,13 @@ void __hyp_text __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu) struct tlb_inv_context cxt; /* Switch to requested VMID */ - __tlb_switch_to_guest()(kvm, &cxt); + __tlb_switch_to_guest(kvm, &cxt); __tlbi(vmalle1); dsb(nsh); isb(); - __tlb_switch_to_host()(kvm, &cxt); + __tlb_switch_to_host(kvm, &cxt); } void __hyp_text __kvm_flush_vm_context(void) diff --git a/arch/arm64/xen/Makefile b/arch/arm64/xen/Makefile index a4fc65f3928d..b66215e8658e 100644 --- a/arch/arm64/xen/Makefile +++ b/arch/arm64/xen/Makefile @@ -1,4 +1,3 @@ # SPDX-License-Identifier: GPL-2.0-only xen-arm-y += $(addprefix ../../arm/xen/, enlighten.o grant-table.o p2m.o mm.o) obj-y := xen-arm.o hypercall.o -obj-$(CONFIG_XEN_EFI) += $(addprefix ../../arm/xen/, efi.o) |