diff options
Diffstat (limited to 'arch/arm64')
20 files changed, 130 insertions, 77 deletions
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index f2b5a4abef21..09b885cc4db5 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -672,6 +672,7 @@ config ARM64_WORKAROUND_TRBE_OVERWRITE_FILL_MODE config ARM64_ERRATUM_2051678 bool "Cortex-A510: 2051678: disable Hardware Update of the page table dirty bit" + default y help This options adds the workaround for ARM Cortex-A510 erratum ARM64_ERRATUM_2051678. Affected Coretex-A510 might not respect the ordering rules for @@ -680,6 +681,22 @@ config ARM64_ERRATUM_2051678 If unsure, say Y. +config ARM64_ERRATUM_2077057 + bool "Cortex-A510: 2077057: workaround software-step corrupting SPSR_EL2" + help + This option adds the workaround for ARM Cortex-A510 erratum 2077057. + Affected Cortex-A510 may corrupt SPSR_EL2 when the a step exception is + expected, but a Pointer Authentication trap is taken instead. The + erratum causes SPSR_EL1 to be copied to SPSR_EL2, which could allow + EL1 to cause a return to EL2 with a guest controlled ELR_EL2. + + This can only happen when EL2 is stepping EL1. + + When these conditions occur, the SPSR_EL2 value is unchanged from the + previous guest entry, and can be restored from the in-memory copy. + + If unsure, say Y. + config ARM64_ERRATUM_2119858 bool "Cortex-A710/X2: 2119858: workaround TRBE overwriting trace data in FILL mode" default y diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 7d5d58800170..21697449d762 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -309,9 +309,6 @@ config ARCH_VISCONTI help This enables support for Toshiba Visconti SoCs Family. -config ARCH_VULCAN - def_bool n - config ARCH_XGENE bool "AppliedMicro X-Gene SOC Family" help diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index 517519e6e87f..f84d4b489e0b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -107,6 +107,12 @@ no-map; }; + /* 32 MiB reserved for ARM Trusted Firmware (BL32) */ + secmon_reserved_bl32: secmon@5300000 { + reg = <0x0 0x05300000 0x0 0x2000000>; + no-map; + }; + linux,cma { compatible = "shared-dma-pool"; reusable; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts index d8838dde0f0f..4fb31c2ba31c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts @@ -157,14 +157,6 @@ regulator-always-on; }; - reserved-memory { - /* TEE Reserved Memory */ - bl32_reserved: bl32@5000000 { - reg = <0x0 0x05300000 0x0 0x2000000>; - no-map; - }; - }; - sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi index 3e968b244191..fd3fa82e4c33 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi @@ -17,7 +17,7 @@ rtc1 = &vrtc; }; - dioo2133: audio-amplifier-0 { + dio2133: audio-amplifier-0 { compatible = "simple-audio-amplifier"; enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; VCC-supply = <&vcc_5v>; @@ -219,7 +219,7 @@ audio-widgets = "Line", "Lineout"; audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>, <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>, - <&dioo2133>; + <&dio2133>; audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", "TDMOUT_B IN 1", "FRDDR_B OUT 1", "TDMOUT_B IN 2", "FRDDR_C OUT 1", diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 6b457b2c30a4..aa14ea017a61 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -49,6 +49,12 @@ no-map; }; + /* 32 MiB reserved for ARM Trusted Firmware (BL32) */ + secmon_reserved_bl32: secmon@5300000 { + reg = <0x0 0x05300000 0x0 0x2000000>; + no-map; + }; + linux,cma { compatible = "shared-dma-pool"; reusable; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts index 212c6aa5a3b8..5751c48620ed 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts @@ -123,7 +123,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; - enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>; + enable-gpio = <&gpio_ao GPIOE_2 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-always-on; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi index 0bd1e98a0eef..ddb1b345397f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi @@ -48,7 +48,7 @@ regulator-max-microvolt = <3300000>; vin-supply = <&vcc_5v>; - enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>; + enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>; enable-active-high; regulator-always-on; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts index 427475846fc7..a5d79f2f7c19 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts @@ -203,14 +203,6 @@ regulator-always-on; }; - reserved-memory { - /* TEE Reserved Memory */ - bl32_reserved: bl32@5000000 { - reg = <0x0 0x05300000 0x0 0x2000000>; - no-map; - }; - }; - sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts index d74e738e4070..c03f4e183389 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts @@ -157,6 +157,10 @@ }; }; +&ftm_alarm0 { + status = "okay"; +}; + &gpio1 { gpio-line-names = "", "", "", "", "", "", "", "", diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi index f3e3418f7edc..2d4a472af6a9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi @@ -1115,8 +1115,8 @@ status = "okay"; ports { - port@1 { - reg = <1>; + port@0 { + reg = <0>; mipi1_sensor_ep: endpoint { remote-endpoint = <&camera1_ep>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 2df2510d0118..e92ebb6147e6 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -554,7 +554,7 @@ assigned-clock-rates = <0>, <0>, <0>, <594000000>; status = "disabled"; - port@0 { + port { lcdif_mipi_dsi: endpoint { remote-endpoint = <&mipi_dsi_lcdif_in>; }; @@ -1151,8 +1151,8 @@ #address-cells = <1>; #size-cells = <0>; - port@0 { - reg = <0>; + port@1 { + reg = <1>; csi1_mipi_ep: endpoint { remote-endpoint = <&csi1_ep>; @@ -1203,8 +1203,8 @@ #address-cells = <1>; #size-cells = <0>; - port@0 { - reg = <0>; + port@1 { + reg = <1>; csi2_mipi_ep: endpoint { remote-endpoint = <&csi2_ep>; diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi index f27e3c8de916..ce6d5bdba0a8 100644 --- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi +++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi @@ -91,7 +91,7 @@ sound { compatible = "fsl,imx-audio-tlv320aic32x4"; - model = "tqm-tlv320aic32"; + model = "imx-audio-tlv320aic32x4"; ssi-controller = <&sai3>; audio-codec = <&tlv320aic3x04>; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts index a5a24f9f46c5..b210cc07c539 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts @@ -15,8 +15,18 @@ model = "Texas Instruments J721S2 EVM"; chosen { - stdout-path = "serial10:115200n8"; - bootargs = "console=ttyS10,115200n8 earlycon=ns16550a,mmio32,2880000"; + stdout-path = "serial2:115200n8"; + bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,2880000"; + }; + + aliases { + serial1 = &mcu_uart0; + serial2 = &main_uart8; + mmc0 = &main_sdhci0; + mmc1 = &main_sdhci1; + can0 = &main_mcan16; + can1 = &mcu_mcan0; + can2 = &mcu_mcan1; }; evm_12v0: fixedregulator-evm12v0 { diff --git a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi index 80d3cae03e88..fe5234c40f6c 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi @@ -21,28 +21,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - serial0 = &wkup_uart0; - serial1 = &mcu_uart0; - serial2 = &main_uart0; - serial3 = &main_uart1; - serial4 = &main_uart2; - serial5 = &main_uart3; - serial6 = &main_uart4; - serial7 = &main_uart5; - serial8 = &main_uart6; - serial9 = &main_uart7; - serial10 = &main_uart8; - serial11 = &main_uart9; - mmc0 = &main_sdhci0; - mmc1 = &main_sdhci1; - can0 = &main_mcan16; - can1 = &mcu_mcan0; - can2 = &mcu_mcan1; - can3 = &main_mcan3; - can4 = &main_mcan5; - }; - chosen { }; cpus { diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c index 066098198c24..b217941713a8 100644 --- a/arch/arm64/kernel/cpu_errata.c +++ b/arch/arm64/kernel/cpu_errata.c @@ -600,6 +600,14 @@ const struct arm64_cpu_capabilities arm64_errata[] = { CAP_MIDR_RANGE_LIST(trbe_write_out_of_range_cpus), }, #endif +#ifdef CONFIG_ARM64_ERRATUM_2077057 + { + .desc = "ARM erratum 2077057", + .capability = ARM64_WORKAROUND_2077057, + .type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM, + ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A510, 0, 0, 2), + }, +#endif #ifdef CONFIG_ARM64_ERRATUM_2064142 { .desc = "ARM erratum 2064142", diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c index a4a0063df456..ecc5958e27fe 100644 --- a/arch/arm64/kvm/arm.c +++ b/arch/arm64/kvm/arm.c @@ -797,6 +797,24 @@ static bool kvm_vcpu_exit_request(struct kvm_vcpu *vcpu, int *ret) xfer_to_guest_mode_work_pending(); } +/* + * Actually run the vCPU, entering an RCU extended quiescent state (EQS) while + * the vCPU is running. + * + * This must be noinstr as instrumentation may make use of RCU, and this is not + * safe during the EQS. + */ +static int noinstr kvm_arm_vcpu_enter_exit(struct kvm_vcpu *vcpu) +{ + int ret; + + guest_state_enter_irqoff(); + ret = kvm_call_hyp_ret(__kvm_vcpu_run, vcpu); + guest_state_exit_irqoff(); + + return ret; +} + /** * kvm_arch_vcpu_ioctl_run - the main VCPU run function to execute guest code * @vcpu: The VCPU pointer @@ -881,9 +899,9 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu) * Enter the guest */ trace_kvm_entry(*vcpu_pc(vcpu)); - guest_enter_irqoff(); + guest_timing_enter_irqoff(); - ret = kvm_call_hyp_ret(__kvm_vcpu_run, vcpu); + ret = kvm_arm_vcpu_enter_exit(vcpu); vcpu->mode = OUTSIDE_GUEST_MODE; vcpu->stat.exits++; @@ -918,26 +936,23 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu) kvm_arch_vcpu_ctxsync_fp(vcpu); /* - * We may have taken a host interrupt in HYP mode (ie - * while executing the guest). This interrupt is still - * pending, as we haven't serviced it yet! + * We must ensure that any pending interrupts are taken before + * we exit guest timing so that timer ticks are accounted as + * guest time. Transiently unmask interrupts so that any + * pending interrupts are taken. * - * We're now back in SVC mode, with interrupts - * disabled. Enabling the interrupts now will have - * the effect of taking the interrupt again, in SVC - * mode this time. + * Per ARM DDI 0487G.b section D1.13.4, an ISB (or other + * context synchronization event) is necessary to ensure that + * pending interrupts are taken. */ local_irq_enable(); + isb(); + local_irq_disable(); + + guest_timing_exit_irqoff(); + + local_irq_enable(); - /* - * We do local_irq_enable() before calling guest_exit() so - * that if a timer interrupt hits while running the guest we - * account that tick as being spent in the guest. We enable - * preemption after calling guest_exit() so that if we get - * preempted we make sure ticks after that is not counted as - * guest time. - */ - guest_exit(); trace_kvm_exit(ret, kvm_vcpu_trap_get_class(vcpu), *vcpu_pc(vcpu)); /* Exit types that need handling before we can be preempted */ diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c index fd2dd26caf91..e3140abd2e2e 100644 --- a/arch/arm64/kvm/handle_exit.c +++ b/arch/arm64/kvm/handle_exit.c @@ -228,6 +228,14 @@ int handle_exit(struct kvm_vcpu *vcpu, int exception_index) { struct kvm_run *run = vcpu->run; + if (ARM_SERROR_PENDING(exception_index)) { + /* + * The SError is handled by handle_exit_early(). If the guest + * survives it will re-execute the original instruction. + */ + return 1; + } + exception_index = ARM_EXCEPTION_CODE(exception_index); switch (exception_index) { diff --git a/arch/arm64/kvm/hyp/include/hyp/switch.h b/arch/arm64/kvm/hyp/include/hyp/switch.h index 58e14f8ead23..701cfb964905 100644 --- a/arch/arm64/kvm/hyp/include/hyp/switch.h +++ b/arch/arm64/kvm/hyp/include/hyp/switch.h @@ -402,6 +402,24 @@ static inline bool kvm_hyp_handle_exit(struct kvm_vcpu *vcpu, u64 *exit_code) return false; } +static inline void synchronize_vcpu_pstate(struct kvm_vcpu *vcpu, u64 *exit_code) +{ + /* + * Check for the conditions of Cortex-A510's #2077057. When these occur + * SPSR_EL2 can't be trusted, but isn't needed either as it is + * unchanged from the value in vcpu_gp_regs(vcpu)->pstate. + * Are we single-stepping the guest, and took a PAC exception from the + * active-not-pending state? + */ + if (cpus_have_final_cap(ARM64_WORKAROUND_2077057) && + vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP && + *vcpu_cpsr(vcpu) & DBG_SPSR_SS && + ESR_ELx_EC(read_sysreg_el2(SYS_ESR)) == ESR_ELx_EC_PAC) + write_sysreg_el2(*vcpu_cpsr(vcpu), SYS_SPSR); + + vcpu->arch.ctxt.regs.pstate = read_sysreg_el2(SYS_SPSR); +} + /* * Return true when we were able to fixup the guest exit and should return to * the guest, false when we should restore the host state and return to the @@ -413,7 +431,7 @@ static inline bool fixup_guest_exit(struct kvm_vcpu *vcpu, u64 *exit_code) * Save PSTATE early so that we can evaluate the vcpu mode * early on. */ - vcpu->arch.ctxt.regs.pstate = read_sysreg_el2(SYS_SPSR); + synchronize_vcpu_pstate(vcpu, exit_code); /* * Check whether we want to repaint the state one way or @@ -424,7 +442,8 @@ static inline bool fixup_guest_exit(struct kvm_vcpu *vcpu, u64 *exit_code) if (ARM_EXCEPTION_CODE(*exit_code) != ARM_EXCEPTION_IRQ) vcpu->arch.fault.esr_el2 = read_sysreg_el2(SYS_ESR); - if (ARM_SERROR_PENDING(*exit_code)) { + if (ARM_SERROR_PENDING(*exit_code) && + ARM_EXCEPTION_CODE(*exit_code) != ARM_EXCEPTION_IRQ) { u8 esr_ec = kvm_vcpu_trap_get_class(vcpu); /* diff --git a/arch/arm64/tools/cpucaps b/arch/arm64/tools/cpucaps index e7719e8f18de..9c65b1e25a96 100644 --- a/arch/arm64/tools/cpucaps +++ b/arch/arm64/tools/cpucaps @@ -55,9 +55,10 @@ WORKAROUND_1418040 WORKAROUND_1463225 WORKAROUND_1508412 WORKAROUND_1542419 -WORKAROUND_2064142 -WORKAROUND_2038923 WORKAROUND_1902691 +WORKAROUND_2038923 +WORKAROUND_2064142 +WORKAROUND_2077057 WORKAROUND_TRBE_OVERWRITE_FILL_MODE WORKAROUND_TSB_FLUSH_FAILURE WORKAROUND_TRBE_WRITE_OUT_OF_RANGE |