diff options
Diffstat (limited to 'arch/arm64')
283 files changed, 20167 insertions, 4256 deletions
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 950a56b71ff0..b1b4476ddb83 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -12,7 +12,6 @@ config ARM64 select ARCH_CLOCKSOURCE_DATA select ARCH_HAS_DEBUG_VIRTUAL select ARCH_HAS_DEVMEM_IS_ALLOWED - select ARCH_HAS_DMA_COHERENT_TO_PFN select ARCH_HAS_DMA_PREP_COHERENT select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI select ARCH_HAS_FAST_MULTIPLIER @@ -67,7 +66,7 @@ config ARM64 select ARCH_USE_QUEUED_SPINLOCKS select ARCH_SUPPORTS_MEMORY_FAILURE select ARCH_SUPPORTS_ATOMIC_RMW - select ARCH_SUPPORTS_INT128 if GCC_VERSION >= 50000 || CC_IS_CLANG + select ARCH_SUPPORTS_INT128 if CC_HAS_INT128 && (GCC_VERSION >= 50000 || CC_IS_CLANG) select ARCH_SUPPORTS_NUMA_BALANCING select ARCH_WANT_COMPAT_IPC_PARSE_VERSION if COMPAT select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT @@ -143,6 +142,8 @@ config ARM64 select HAVE_DEBUG_KMEMLEAK select HAVE_DMA_CONTIGUOUS select HAVE_DYNAMIC_FTRACE + select HAVE_DYNAMIC_FTRACE_WITH_REGS \ + if $(cc-option,-fpatchable-function-entry=2) select HAVE_EFFICIENT_UNALIGNED_ACCESS select HAVE_FAST_GUP select HAVE_FTRACE_MCOUNT_RECORD @@ -180,7 +181,6 @@ config ARM64 select PCI_SYSCALL if PCI select POWER_RESET select POWER_SUPPLY - select REFCOUNT_FULL select SPARSE_IRQ select SWIOTLB select SYSCTL_EXCEPTION_TRACE @@ -266,6 +266,10 @@ config GENERIC_CSUM config GENERIC_CALIBRATE_DELAY def_bool y +config ZONE_DMA + bool "Support DMA zone" if EXPERT + default y + config ZONE_DMA32 bool "Support DMA32 zone" if EXPERT default y @@ -538,6 +542,16 @@ config ARM64_ERRATUM_1286807 invalidated has been observed by other observers. The workaround repeats the TLBI+DSB operation. +config ARM64_ERRATUM_1319367 + bool "Cortex-A57/A72: Speculative AT instruction using out-of-context translation regime could cause subsequent request to generate an incorrect translation" + default y + help + This option adds work arounds for ARM Cortex-A57 erratum 1319537 + and A72 erratum 1319367 + + Cortex-A57 and A72 cores could end-up with corrupted TLBs by + speculating an AT instruction during a guest context switch. + If unsure, say Y. config ARM64_ERRATUM_1463225 @@ -558,6 +572,22 @@ config ARM64_ERRATUM_1463225 If unsure, say Y. +config ARM64_ERRATUM_1542419 + bool "Neoverse-N1: workaround mis-ordering of instruction fetches" + default y + help + This option adds a workaround for ARM Neoverse-N1 erratum + 1542419. + + Affected Neoverse-N1 cores could execute a stale instruction when + modified by another CPU. The workaround depends on a firmware + counterpart. + + Workaround the issue by hiding the DIC feature from EL0. This + forces user-space to perform cache maintenance. + + If unsure, say Y. + config CAVIUM_ERRATUM_22375 bool "Cavium erratum 22375, 24313" default y @@ -616,6 +646,23 @@ config CAVIUM_ERRATUM_30115 If unsure, say Y. +config CAVIUM_TX2_ERRATUM_219 + bool "Cavium ThunderX2 erratum 219: PRFM between TTBR change and ISB fails" + default y + help + On Cavium ThunderX2, a load, store or prefetch instruction between a + TTBR update and the corresponding context synchronizing operation can + cause a spurious Data Abort to be delivered to any hardware thread in + the CPU core. + + Work around the issue by avoiding the problematic code sequence and + trapping KVM guest TTBRx_EL1 writes to EL2 when SMT is enabled. The + trap handler performs the corresponding register access, skips the + instruction and ensures context synchronization by virtue of the + exception return. + + If unsure, say Y. + config QCOM_FALKOR_ERRATUM_1003 bool "Falkor E1003: Incorrect translation due to ASID change" default y @@ -828,10 +875,26 @@ config ARM64_PA_BITS default 48 if ARM64_PA_BITS_48 default 52 if ARM64_PA_BITS_52 +choice + prompt "Endianness" + default CPU_LITTLE_ENDIAN + help + Select the endianness of data accesses performed by the CPU. Userspace + applications will need to be compiled and linked for the endianness + that is selected here. + config CPU_BIG_ENDIAN bool "Build big-endian kernel" help - Say Y if you plan on running a kernel in big-endian mode. + Say Y if you plan on running a kernel with a big-endian userspace. + +config CPU_LITTLE_ENDIAN + bool "Build little-endian kernel" + help + Say Y if you plan on running a kernel with a little-endian userspace. + This is usually the case for distributions targeting arm64. + +endchoice config SCHED_MC bool "Multi-core scheduler support" @@ -1580,6 +1643,7 @@ config CMDLINE config CMDLINE_FORCE bool "Always use the default kernel command string" + depends on CMDLINE != "" help Always use the default kernel command string, even if the boot loader passes other arguments to the kernel. diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 16d761475a86..b2b504ea6fd6 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -37,11 +37,12 @@ config ARCH_BCM2835 select PINCTRL select PINCTRL_BCM2835 select ARM_AMBA + select ARM_GIC select ARM_TIMER_SP804 select HAVE_ARM_ARCH_TIMER help - This enables support for the Broadcom BCM2837 SoC. - This SoC is used in the Raspberry Pi 3 device. + This enables support for the Broadcom BCM2837 and BCM2711 SoC. + These SoCs are used in the Raspberry Pi 3 and 4 devices. config ARCH_BCM_IPROC bool "Broadcom iProc SoC Family" @@ -188,6 +189,7 @@ config ARCH_QCOM config ARCH_REALTEK bool "Realtek Platforms" + select RESET_CONTROLLER help This enables support for the ARMv8 based Realtek chipsets, like the RTD1295. @@ -212,6 +214,11 @@ config ARCH_ROCKCHIP This enables support for the ARMv8 based Rockchip chipsets, like the RK3368. +config ARCH_S32 + bool "NXP S32 SoC Family" + help + This enables support for the NXP S32 family of processors. + config ARCH_SEATTLE bool "AMD Seattle SoC Family" help diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index 2c0238ce0551..1fbe24d4fdb6 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -95,6 +95,11 @@ ifeq ($(CONFIG_ARM64_MODULE_PLTS),y) KBUILD_LDS_MODULE += $(srctree)/arch/arm64/kernel/module.lds endif +ifeq ($(CONFIG_DYNAMIC_FTRACE_WITH_REGS),y) + KBUILD_CPPFLAGS += -DCC_USING_PATCHABLE_FUNCTION_ENTRY + CC_FLAGS_FTRACE := -fpatchable-function-entry=2 +endif + # Default value head-y := arch/arm64/kernel/head.o diff --git a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts index 732daaa6e9d3..59291e0ea1ee 100644 --- a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts +++ b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts @@ -12,6 +12,9 @@ model = "Bubblegum-96"; aliases { + mmc0 = &mmc0; + mmc1 = &mmc1; + mmc2 = &mmc2; serial5 = &uart5; }; @@ -23,6 +26,24 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; + + /* Fixed regulator used in the absence of PMIC */ + vcc_3v1: vcc-3v1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.1V"; + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-always-on; + }; + + /* Fixed regulator used in the absence of PMIC */ + sd_vcc: sd-vcc { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.1V"; + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-always-on; + }; }; &i2c0 { @@ -241,6 +262,47 @@ bias-pull-up; }; }; + + mmc0_default: mmc0_default { + pinmux { + groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp", + "sd0_cmd_mfp", "sd0_clk_mfp"; + function = "sd0"; + }; + }; + + mmc2_default: mmc2_default { + pinmux { + groups = "nand0_d0_ceb3_mfp"; + function = "sd2"; + }; + }; +}; + +/* uSD */ +&mmc0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_default>; + no-sdio; + no-mmc; + no-1-8-v; + cd-gpios = <&pinctrl 120 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <&sd_vcc>; + vqmmc-supply = <&sd_vcc>; +}; + +/* eMMC */ +&mmc2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_default>; + no-sdio; + no-sd; + non-removable; + bus-width = <8>; + vmmc-supply = <&vcc_3v1>; }; &timer { diff --git a/arch/arm64/boot/dts/actions/s900.dtsi b/arch/arm64/boot/dts/actions/s900.dtsi index df3a68a3ac97..eb35cf78ab73 100644 --- a/arch/arm64/boot/dts/actions/s900.dtsi +++ b/arch/arm64/boot/dts/actions/s900.dtsi @@ -4,6 +4,7 @@ */ #include <dt-bindings/clock/actions,s900-cmu.h> +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/actions,s900-reset.h> @@ -284,5 +285,49 @@ dma-requests = <46>; clocks = <&cmu CLK_DMAC>; }; + + mmc0: mmc@e0330000 { + compatible = "actions,owl-mmc"; + reg = <0x0 0xe0330000 0x0 0x4000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_SD0>; + resets = <&cmu RESET_SD0>; + dmas = <&dma 2>; + dma-names = "mmc"; + status = "disabled"; + }; + + mmc1: mmc@e0334000 { + compatible = "actions,owl-mmc"; + reg = <0x0 0xe0334000 0x0 0x4000>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_SD1>; + resets = <&cmu RESET_SD1>; + dmas = <&dma 3>; + dma-names = "mmc"; + status = "disabled"; + }; + + mmc2: mmc@e0338000 { + compatible = "actions,owl-mmc"; + reg = <0x0 0xe0338000 0x0 0x4000>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_SD2>; + resets = <&cmu RESET_SD2>; + dmas = <&dma 4>; + dma-names = "mmc"; + status = "disabled"; + }; + + mmc3: mmc@e033c000 { + compatible = "actions,owl-mmc"; + reg = <0x0 0xe033c000 0x0 0x4000>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_SD3>; + resets = <&cmu RESET_SD3>; + dmas = <&dma 46>; + dma-names = "mmc"; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts index 04446e4716c4..f54a415f2e3b 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts @@ -114,6 +114,19 @@ }; }; +&codec { + status = "okay"; +}; + +&codec_analog { + cpvdd-supply = <®_eldo1>; + status = "okay"; +}; + +&dai { + status = "okay"; +}; + &de { status = "okay"; }; @@ -333,6 +346,22 @@ vcc-hdmi-supply = <®_dldo1>; }; +&sound { + status = "okay"; + simple-audio-card,widgets = "Headphone", "Headphone Jack", + "Microphone", "Microphone Jack", + "Microphone", "Onboard Microphone"; + simple-audio-card,routing = + "Left DAC", "AIF1 Slot 0 Left", + "Right DAC", "AIF1 Slot 0 Right", + "AIF1 Slot 0 Left ADC", "Left ADC", + "AIF1 Slot 0 Right ADC", "Right ADC", + "Headphone Jack", "HP", + "MIC2", "Microphone Jack", + "Onboard Microphone", "MBIAS", + "MIC1", "Onboard Microphone"; +}; + &spi0 { status = "okay"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts index 25099202c52c..920103ec0046 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts @@ -55,6 +55,10 @@ aliases { ethernet0 = &emac; serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; }; chosen { @@ -210,6 +214,27 @@ status = "okay"; }; +/* On Pi-2 connector */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "disabled"; +}; + +/* On Euler connector */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "disabled"; +}; + +/* On Euler connector, RTS/CTS optional */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + status = "disabled"; +}; + &usb_otg { dr_mode = "host"; status = "okay"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts index 1069e7012c9c..970415106dcf 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts @@ -100,18 +100,41 @@ status = "okay"; }; +&de { + status = "okay"; +}; + &ehci1 { status = "okay"; }; -/* The ANX6345 eDP-bridge is on i2c0. There is no linux (mainline) - * driver for this chip at the moment, the bootloader initializes it. - * However it can be accessed with the i2c-dev driver from user space. - */ &i2c0 { clock-frequency = <100000>; status = "okay"; + + anx6345: anx6345@38 { + compatible = "analogix,anx6345"; + reg = <0x38>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */ + dvdd25-supply = <®_dldo2>; + dvdd12-supply = <®_dldo3>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + anx6345_in: endpoint { + remote-endpoint = <&tcon0_out_anx6345>; + }; + }; + }; + }; +}; + +&mixer0 { + status = "okay"; }; &mmc0 { @@ -319,6 +342,20 @@ status = "okay"; }; +&tcon0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rgb666_pins>; + + status = "okay"; +}; + +&tcon0_out { + tcon0_out_anx6345: endpoint@0 { + reg = <0>; + remote-endpoint = <&anx6345_in>; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 70f4cce6be43..27e48234f1c2 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -142,6 +142,15 @@ clock-output-names = "ext-osc32k"; }; + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + psci { compatible = "arm,psci-0.2"; method = "smc"; @@ -478,6 +487,15 @@ reg = <0x1c14000 0x400>; }; + crypto: crypto@1c15000 { + compatible = "allwinner,sun50i-a64-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CE>; + }; + usb_otg: usb@1c19000 { compatible = "allwinner,sun8i-a33-musb"; reg = <0x01c19000 0x0400>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi index 82f4b44d525f..5bec574fa108 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi @@ -23,6 +23,8 @@ compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */ post-power-on-delay-ms = <200>; + clocks = <&rtc 1>; + clock-names = "ext_clock"; }; }; @@ -56,5 +58,16 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vcc3v3>; + vddio-supply = <®_vcc3v3>; + shutdown-gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */ + device-wakeup-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ + }; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi index f002a496d7cb..e92c4de5bf3b 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi @@ -127,6 +127,15 @@ allwinner,sram = <&ve_sram 1>; }; + crypto: crypto@1c15000 { + compatible = "allwinner,sun50i-h5-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CE>; + }; + mali: gpu@1e80000 { compatible = "allwinner,sun50i-h5-mali", "arm,mali-450"; reg = <0x01e80000 0x30000>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts index 1d05d570142f..f335f7482a73 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts @@ -89,6 +89,11 @@ status = "okay"; }; +&gpu { + mali-supply = <®_dcdcc>; + status = "okay"; +}; + &hdmi { status = "okay"; }; @@ -225,6 +230,7 @@ }; reg_dcdcc: dcdcc { + regulator-enable-ramp-delay = <32000>; regulator-min-microvolt = <810000>; regulator-max-microvolt = <1080000>; regulator-name = "vdd-gpu"; @@ -252,6 +258,7 @@ }; &r_ir { + linux,rc-map-name = "rc-beelink-gs1"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts index eb379cd402ac..4ed3fc2c7734 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts @@ -15,6 +15,7 @@ aliases { serial0 = &uart0; + serial1 = &uart1; }; chosen { @@ -94,6 +95,10 @@ status = "okay"; }; +&dwc3 { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -102,6 +107,11 @@ status = "okay"; }; +&gpu { + mali-supply = <®_dcdcc>; + status = "okay"; +}; + &hdmi { status = "okay"; }; @@ -237,6 +247,7 @@ }; reg_dcdcc: dcdcc { + regulator-enable-ramp-delay = <32000>; regulator-min-microvolt = <810000>; regulator-max-microvolt = <1080000>; regulator-name = "vdd-gpu"; @@ -269,6 +280,24 @@ status = "okay"; }; +/* There's the BT part of the AP6256 connected to that UART */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4345c5"; + clocks = <&rtc 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */ + host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */ + shutdown-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */ + max-speed = <1500000>; + }; +}; + &usb2otg { /* * This board doesn't have a controllable VBUS even though it @@ -285,3 +314,7 @@ usb3_vbus-supply = <®_vcc5v>; status = "okay"; }; + +&usb3phy { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi index ec9b6a578e3f..df4cbd7ef96c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi @@ -55,6 +55,11 @@ status = "okay"; }; +&gpu { + mali-supply = <®_dcdcc>; + status = "okay"; +}; + &mmc0 { vmmc-supply = <®_cldo1>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; @@ -163,6 +168,7 @@ }; reg_dcdcc: dcdcc { + regulator-enable-ramp-delay = <32000>; regulator-min-microvolt = <810000>; regulator-max-microvolt = <1080000>; regulator-name = "vdd-gpu"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts index 30102daf83cc..74899ede00fb 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts @@ -85,6 +85,11 @@ status = "okay"; }; +&gpu { + mali-supply = <®_dcdcc>; + status = "okay"; +}; + &hdmi { status = "okay"; }; @@ -221,6 +226,7 @@ }; reg_dcdcc: dcdcc { + regulator-enable-ramp-delay = <32000>; regulator-min-microvolt = <810000>; regulator-max-microvolt = <1080000>; regulator-name = "vdd-gpu"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts index 7e7cb10e3d96..bccfe1e65b6a 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts @@ -53,6 +53,10 @@ status = "okay"; }; +&gpu { + status = "okay"; +}; + &hdmi { status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index 0d5ea19336a1..29824081b43b 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -149,6 +149,29 @@ allwinner,sram = <&ve_sram 1>; }; + gpu: gpu@1800000 { + compatible = "allwinner,sun50i-h6-mali", + "arm,mali-t720"; + reg = <0x01800000 0x4000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>; + clock-names = "core", "bus"; + resets = <&ccu RST_BUS_GPU>; + status = "disabled"; + }; + + crypto: crypto@1904000 { + compatible = "allwinner,sun50i-h6-crypto"; + reg = <0x01904000 0x1000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>, <&ccu CLK_MBUS_CE>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_CE>; + }; + syscon: syscon@3000000 { compatible = "allwinner,sun50i-h6-system-control", "allwinner,sun50i-a64-system-control"; @@ -299,6 +322,16 @@ pins = "PH0", "PH1"; function = "uart0"; }; + + uart1_pins: uart1-pins { + pins = "PG6", "PG7"; + function = "uart1"; + }; + + uart1_rts_cts_pins: uart1-rts-cts-pins { + pins = "PG8", "PG9"; + function = "uart1"; + }; }; gic: interrupt-controller@3021000 { @@ -537,6 +570,38 @@ status = "disabled"; }; + dwc3: dwc3@5200000 { + compatible = "snps,dwc3"; + reg = <0x05200000 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_XHCI>, + <&ccu CLK_BUS_XHCI>, + <&rtc 0>; + clock-names = "ref", "bus_early", "suspend"; + resets = <&ccu RST_BUS_XHCI>; + /* + * The datasheet of the chip doesn't declare the + * peripheral function, and there's no boards known + * to have a USB Type-B port routed to the port. + * In addition, no one has tested the peripheral + * function yet. + * So set the dr_mode to "host" in the DTSI file. + */ + dr_mode = "host"; + phys = <&usb3phy>; + phy-names = "usb3-phy"; + status = "disabled"; + }; + + usb3phy: phy@5210000 { + compatible = "allwinner,sun50i-h6-usb3-phy"; + reg = <0x5210000 0x10000>; + clocks = <&ccu CLK_USB_PHY1>; + resets = <&ccu RST_USB_PHY1>; + #phy-cells = <0>; + status = "disabled"; + }; + ehci3: usb@5311000 { compatible = "allwinner,sun50i-h6-ehci", "generic-ehci"; reg = <0x05311000 0x100>; @@ -618,7 +683,6 @@ "tcon-tv0"; clock-output-names = "tcon-top-tv0"; resets = <&ccu RST_BUS_TCON_TOP>; - reset-names = "rst"; #clock-cells = <1>; ports { diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts index 66e4ffb4e929..fb11ef05d556 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -178,12 +178,12 @@ qspi_boot: partition@0 { label = "Boot and fpga data"; - reg = <0x0 0x4000000>; + reg = <0x0 0x034B0000>; }; qspi_rootfs: partition@4000000 { label = "Root Filesystem - JFFS2"; - reg = <0x4000000 0x4000000>; + reg = <0x034B0000 0x0EB50000>; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 84afecba9ec0..63400538d39f 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-ugoos-am6.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb @@ -36,3 +37,4 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts b/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts new file mode 100644 index 000000000000..69c25c68c358 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "meson-a1.dtsi" + +/ { + compatible = "amlogic,ad401", "amlogic,a1"; + model = "Amlogic Meson A1 AD401 Development Board"; + + aliases { + serial0 = &uart_AO_B; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x8000000>; + }; +}; + +&uart_AO_B { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi new file mode 100644 index 000000000000..7210ad049d1d --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi @@ -0,0 +1,130 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "amlogic,a1"; + + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + l2: l2-cache0 { + compatible = "cache"; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x800000>; + alignment = <0x0 0x400000>; + linux,cma-default; + }; + }; + + sm: secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + apb: bus@fe000000 { + compatible = "simple-bus"; + reg = <0x0 0xfe000000 0x0 0x1000000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x1000000>; + + uart_AO: serial@1c00 { + compatible = "amlogic,meson-gx-uart", + "amlogic,meson-ao-uart"; + reg = <0x0 0x1c00 0x0 0x18>; + interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&xtal>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + + uart_AO_B: serial@2000 { + compatible = "amlogic,meson-gx-uart", + "amlogic,meson-ao-uart"; + reg = <0x0 0x2000 0x0 0x18>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&xtal>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + }; + + gic: interrupt-controller@ff901000 { + compatible = "arm,gic-400"; + reg = <0x0 0xff901000 0x0 0x1000>, + <0x0 0xff902000 0x0 0x2000>, + <0x0 0xff904000 0x0 0x2000>, + <0x0 0xff906000 0x0 0x2000>; + interrupt-controller; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + #interrupt-cells = <3>; + #address-cells = <0>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; + }; + + xtal: xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xtal"; + #clock-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index 82919b106010..04803c3bccfa 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -117,6 +117,7 @@ #address-cells = <1>; #size-cells = <1>; read-only; + secure-monitor = <&sm>; }; psci { @@ -1162,7 +1163,7 @@ toddr_a: audio-controller@100 { compatible = "amlogic,axg-toddr"; - reg = <0x0 0x100 0x0 0x1c>; + reg = <0x0 0x100 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "TODDR_A"; interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>; @@ -1173,7 +1174,7 @@ toddr_b: audio-controller@140 { compatible = "amlogic,axg-toddr"; - reg = <0x0 0x140 0x0 0x1c>; + reg = <0x0 0x140 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "TODDR_B"; interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>; @@ -1184,7 +1185,7 @@ toddr_c: audio-controller@180 { compatible = "amlogic,axg-toddr"; - reg = <0x0 0x180 0x0 0x1c>; + reg = <0x0 0x180 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "TODDR_C"; interrupts = <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>; @@ -1195,7 +1196,7 @@ frddr_a: audio-controller@1c0 { compatible = "amlogic,axg-frddr"; - reg = <0x0 0x1c0 0x0 0x1c>; + reg = <0x0 0x1c0 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "FRDDR_A"; interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>; @@ -1206,7 +1207,7 @@ frddr_b: audio-controller@200 { compatible = "amlogic,axg-frddr"; - reg = <0x0 0x200 0x0 0x1c>; + reg = <0x0 0x200 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "FRDDR_B"; interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>; @@ -1217,7 +1218,7 @@ frddr_c: audio-controller@240 { compatible = "amlogic,axg-frddr"; - reg = <0x0 0x240 0x0 0x1c>; + reg = <0x0 0x240 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "FRDDR_C"; interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index 3f39e020f74e..7fabc8d9654a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -5,51 +5,42 @@ #include <dt-bindings/phy/phy.h> #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/clock/axg-audio-clkc.h> #include <dt-bindings/clock/g12a-clkc.h> #include <dt-bindings/clock/g12a-aoclkc.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h> -#include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h> #include <dt-bindings/reset/amlogic,meson-g12a-reset.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; - tdmif_a: audio-controller-0 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_A"; - clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, - <&clkc_audio AUD_CLKID_MST_A_SCLK>, - <&clkc_audio AUD_CLKID_MST_A_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; - tdmif_b: audio-controller-1 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_B"; - clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, - <&clkc_audio AUD_CLKID_MST_B_SCLK>, - <&clkc_audio AUD_CLKID_MST_B_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; + simplefb_cvbs: framebuffer-cvbs { + compatible = "amlogic,simple-framebuffer", + "simple-framebuffer"; + amlogic,pipeline = "vpu-cvbs"; + clocks = <&clkc CLKID_HDMI>, + <&clkc CLKID_HTX_PCLK>, + <&clkc CLKID_VPU_INTR>; + status = "disabled"; + }; - tdmif_c: audio-controller-2 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_C"; - clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, - <&clkc_audio AUD_CLKID_MST_C_SCLK>, - <&clkc_audio AUD_CLKID_MST_C_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; + simplefb_hdmi: framebuffer-hdmi { + compatible = "amlogic,simple-framebuffer", + "simple-framebuffer"; + amlogic,pipeline = "vpu-hdmi"; + clocks = <&clkc CLKID_HDMI>, + <&clkc CLKID_HTX_PCLK>, + <&clkc CLKID_VPU_INTR>; + status = "disabled"; + }; }; efuse: efuse { @@ -58,6 +49,7 @@ #address-cells = <1>; #size-cells = <1>; read-only; + secure-monitor = <&sm>; }; psci { @@ -95,6 +87,94 @@ #size-cells = <2>; ranges; + pcie: pcie@fc000000 { + compatible = "amlogic,g12a-pcie", "snps,dw-pcie"; + reg = <0x0 0xfc000000 0x0 0x400000 + 0x0 0xff648000 0x0 0x2000 + 0x0 0xfc400000 0x0 0x200000>; + reg-names = "elbi", "cfg", "config"; + interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + bus-range = <0x0 0xff>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x0 0xfc600000 0 0x00100000 + 0x82000000 0 0xfc700000 0x0 0xfc700000 0 0x1900000>; + + clocks = <&clkc CLKID_PCIE_PHY + &clkc CLKID_PCIE_COMB + &clkc CLKID_PCIE_PLL>; + clock-names = "general", + "pclk", + "port"; + resets = <&reset RESET_PCIE_CTRL_A>, + <&reset RESET_PCIE_APB>; + reset-names = "port", + "apb"; + num-lanes = <1>; + phys = <&usb3_pcie_phy PHY_TYPE_PCIE>; + phy-names = "pcie"; + status = "disabled"; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&cpu_temp>; + + trips { + cpu_passive: cpu-passive { + temperature = <85000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + cpu_hot: cpu-hot { + temperature = <95000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "hot"; + }; + + cpu_critical: cpu-critical { + temperature = <110000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + }; + + ddr_thermal: ddr-thermal { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&ddr_temp>; + + trips { + ddr_passive: ddr-passive { + temperature = <85000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + ddr_critical: ddr-critical { + temperature = <110000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map { + trip = <&ddr_passive>; + cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + ethmac: ethernet@ff3f0000 { compatible = "amlogic,meson-axg-dwmac", "snps,dwmac-3.70a", @@ -1356,6 +1436,26 @@ }; }; + cpu_temp: temperature-sensor@34800 { + compatible = "amlogic,g12a-cpu-thermal", + "amlogic,g12a-thermal"; + reg = <0x0 0x34800 0x0 0x50>; + interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_TS>; + #thermal-sensor-cells = <0>; + amlogic,ao-secure = <&sec_AO>; + }; + + ddr_temp: temperature-sensor@34c00 { + compatible = "amlogic,g12a-ddr-thermal", + "amlogic,g12a-thermal"; + reg = <0x0 0x34c00 0x0 0x50>; + interrupts = <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_TS>; + #thermal-sensor-cells = <0>; + amlogic,ao-secure = <&sec_AO>; + }; + usb2_phy0: phy@36000 { compatible = "amlogic,g12a-usb2-phy"; reg = <0x0 0x36000 0x0 0x2000>; @@ -1457,290 +1557,6 @@ }; }; - pdm: audio-controller@40000 { - compatible = "amlogic,g12a-pdm", - "amlogic,axg-pdm"; - reg = <0x0 0x40000 0x0 0x34>; - #sound-dai-cells = <0>; - sound-name-prefix = "PDM"; - clocks = <&clkc_audio AUD_CLKID_PDM>, - <&clkc_audio AUD_CLKID_PDM_DCLK>, - <&clkc_audio AUD_CLKID_PDM_SYSCLK>; - clock-names = "pclk", "dclk", "sysclk"; - status = "disabled"; - }; - - audio: bus@42000 { - compatible = "simple-bus"; - reg = <0x0 0x42000 0x0 0x2000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x42000 0x0 0x2000>; - - clkc_audio: clock-controller@0 { - status = "disabled"; - compatible = "amlogic,g12a-audio-clkc"; - reg = <0x0 0x0 0x0 0xb4>; - #clock-cells = <1>; - #reset-cells = <1>; - - clocks = <&clkc CLKID_AUDIO>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>, - <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL3>, - <&clkc CLKID_HIFI_PLL>, - <&clkc CLKID_FCLK_DIV3>, - <&clkc CLKID_FCLK_DIV4>, - <&clkc CLKID_GP0_PLL>; - clock-names = "pclk", - "mst_in0", - "mst_in1", - "mst_in2", - "mst_in3", - "mst_in4", - "mst_in5", - "mst_in6", - "mst_in7"; - - resets = <&reset RESET_AUDIO>; - }; - - toddr_a: audio-controller@100 { - compatible = "amlogic,g12a-toddr", - "amlogic,axg-toddr"; - reg = <0x0 0x100 0x0 0x1c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_A"; - interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_TODDR_A>; - resets = <&arb AXG_ARB_TODDR_A>; - status = "disabled"; - }; - - toddr_b: audio-controller@140 { - compatible = "amlogic,g12a-toddr", - "amlogic,axg-toddr"; - reg = <0x0 0x140 0x0 0x1c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_B"; - interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_TODDR_B>; - resets = <&arb AXG_ARB_TODDR_B>; - status = "disabled"; - }; - - toddr_c: audio-controller@180 { - compatible = "amlogic,g12a-toddr", - "amlogic,axg-toddr"; - reg = <0x0 0x180 0x0 0x1c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_C"; - interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_TODDR_C>; - resets = <&arb AXG_ARB_TODDR_C>; - status = "disabled"; - }; - - frddr_a: audio-controller@1c0 { - compatible = "amlogic,g12a-frddr", - "amlogic,axg-frddr"; - reg = <0x0 0x1c0 0x0 0x1c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_A"; - interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; - resets = <&arb AXG_ARB_FRDDR_A>; - status = "disabled"; - }; - - frddr_b: audio-controller@200 { - compatible = "amlogic,g12a-frddr", - "amlogic,axg-frddr"; - reg = <0x0 0x200 0x0 0x1c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_B"; - interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_FRDDR_B>; - resets = <&arb AXG_ARB_FRDDR_B>; - status = "disabled"; - }; - - frddr_c: audio-controller@240 { - compatible = "amlogic,g12a-frddr", - "amlogic,axg-frddr"; - reg = <0x0 0x240 0x0 0x1c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_C"; - interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_FRDDR_C>; - resets = <&arb AXG_ARB_FRDDR_C>; - status = "disabled"; - }; - - arb: reset-controller@280 { - status = "disabled"; - compatible = "amlogic,meson-axg-audio-arb"; - reg = <0x0 0x280 0x0 0x4>; - #reset-cells = <1>; - clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; - }; - - tdmin_a: audio-controller@300 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x300 0x0 0x40>; - sound-name-prefix = "TDMIN_A"; - resets = <&clkc_audio AUD_RESET_TDMIN_A>; - clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, - <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_b: audio-controller@340 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x340 0x0 0x40>; - sound-name-prefix = "TDMIN_B"; - resets = <&clkc_audio AUD_RESET_TDMIN_B>; - clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, - <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_c: audio-controller@380 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x380 0x0 0x40>; - sound-name-prefix = "TDMIN_C"; - resets = <&clkc_audio AUD_RESET_TDMIN_C>; - clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, - <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_lb: audio-controller@3c0 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x3c0 0x0 0x40>; - sound-name-prefix = "TDMIN_LB"; - resets = <&clkc_audio AUD_RESET_TDMIN_LB>; - clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, - <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - spdifin: audio-controller@400 { - compatible = "amlogic,g12a-spdifin", - "amlogic,axg-spdifin"; - reg = <0x0 0x400 0x0 0x30>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFIN"; - interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_SPDIFIN>, - <&clkc_audio AUD_CLKID_SPDIFIN_CLK>; - clock-names = "pclk", "refclk"; - status = "disabled"; - }; - - spdifout: audio-controller@480 { - compatible = "amlogic,g12a-spdifout", - "amlogic,axg-spdifout"; - reg = <0x0 0x480 0x0 0x50>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFOUT"; - clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, - <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; - clock-names = "pclk", "mclk"; - status = "disabled"; - }; - - tdmout_a: audio-controller@500 { - compatible = "amlogic,g12a-tdmout"; - reg = <0x0 0x500 0x0 0x40>; - sound-name-prefix = "TDMOUT_A"; - resets = <&clkc_audio AUD_RESET_TDMOUT_A>; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, - <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmout_b: audio-controller@540 { - compatible = "amlogic,g12a-tdmout"; - reg = <0x0 0x540 0x0 0x40>; - sound-name-prefix = "TDMOUT_B"; - resets = <&clkc_audio AUD_RESET_TDMOUT_B>; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, - <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmout_c: audio-controller@580 { - compatible = "amlogic,g12a-tdmout"; - reg = <0x0 0x580 0x0 0x40>; - sound-name-prefix = "TDMOUT_C"; - resets = <&clkc_audio AUD_RESET_TDMOUT_C>; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, - <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - spdifout_b: audio-controller@680 { - compatible = "amlogic,g12a-spdifout", - "amlogic,axg-spdifout"; - reg = <0x0 0x680 0x0 0x50>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFOUT_B"; - clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>, - <&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>; - clock-names = "pclk", "mclk"; - status = "disabled"; - }; - - tohdmitx: audio-controller@744 { - compatible = "amlogic,g12a-tohdmitx"; - reg = <0x0 0x744 0x0 0x4>; - #sound-dai-cells = <1>; - sound-name-prefix = "TOHDMITX"; - status = "disabled"; - }; - }; - usb3_pcie_phy: phy@46000 { compatible = "amlogic,g12a-usb3-pcie-phy"; reg = <0x0 0x46000 0x0 0x2000>; @@ -2388,10 +2204,10 @@ compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost"; reg = <0x0 0xffe40000 0x0 0x40000>; interrupt-parent = <&gic>; - interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "gpu", "mmu", "job"; + <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; clocks = <&clkc CLKID_MALI>; resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>; @@ -2409,6 +2225,7 @@ assigned-clock-rates = <0>, /* Do Nothing */ <800000000>, <0>; /* Do Nothing */ + #cooling-cells = <2>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi new file mode 100644 index 000000000000..b3ba2fda8af8 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi @@ -0,0 +1,392 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Jerome Brunet <jbrunet@baylibre.com> + */ + +#include "meson-g12-common.dtsi" +#include <dt-bindings/clock/axg-audio-clkc.h> +#include <dt-bindings/power/meson-g12a-power.h> +#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h> +#include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h> + +/ { + tdmif_a: audio-controller-0 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_A"; + clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, + <&clkc_audio AUD_CLKID_MST_A_SCLK>, + <&clkc_audio AUD_CLKID_MST_A_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + tdmif_b: audio-controller-1 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_B"; + clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, + <&clkc_audio AUD_CLKID_MST_B_SCLK>, + <&clkc_audio AUD_CLKID_MST_B_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + tdmif_c: audio-controller-2 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_C"; + clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, + <&clkc_audio AUD_CLKID_MST_C_SCLK>, + <&clkc_audio AUD_CLKID_MST_C_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; +}; + +&apb { + pdm: audio-controller@40000 { + compatible = "amlogic,g12a-pdm", + "amlogic,axg-pdm"; + reg = <0x0 0x40000 0x0 0x34>; + #sound-dai-cells = <0>; + sound-name-prefix = "PDM"; + clocks = <&clkc_audio AUD_CLKID_PDM>, + <&clkc_audio AUD_CLKID_PDM_DCLK>, + <&clkc_audio AUD_CLKID_PDM_SYSCLK>; + clock-names = "pclk", "dclk", "sysclk"; + status = "disabled"; + }; + + audio: bus@42000 { + compatible = "simple-bus"; + reg = <0x0 0x42000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x42000 0x0 0x2000>; + + clkc_audio: clock-controller@0 { + status = "disabled"; + compatible = "amlogic,g12a-audio-clkc"; + reg = <0x0 0x0 0x0 0xb4>; + #clock-cells = <1>; + #reset-cells = <1>; + + clocks = <&clkc CLKID_AUDIO>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL3>, + <&clkc CLKID_HIFI_PLL>, + <&clkc CLKID_FCLK_DIV3>, + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_GP0_PLL>; + clock-names = "pclk", + "mst_in0", + "mst_in1", + "mst_in2", + "mst_in3", + "mst_in4", + "mst_in5", + "mst_in6", + "mst_in7"; + + resets = <&reset RESET_AUDIO>; + }; + + toddr_a: audio-controller@100 { + compatible = "amlogic,g12a-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x100 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_A"; + interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_A>; + resets = <&arb AXG_ARB_TODDR_A>, + <&clkc_audio AUD_RESET_TODDR_A>; + reset-names = "arb", "rst"; + status = "disabled"; + }; + + toddr_b: audio-controller@140 { + compatible = "amlogic,g12a-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x140 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_B"; + interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_B>; + resets = <&arb AXG_ARB_TODDR_B>, + <&clkc_audio AUD_RESET_TODDR_B>; + reset-names = "arb", "rst"; + status = "disabled"; + }; + + toddr_c: audio-controller@180 { + compatible = "amlogic,g12a-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x180 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_C"; + interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_C>; + resets = <&arb AXG_ARB_TODDR_C>, + <&clkc_audio AUD_RESET_TODDR_C>; + reset-names = "arb", "rst"; + status = "disabled"; + }; + + frddr_a: audio-controller@1c0 { + compatible = "amlogic,g12a-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x1c0 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_A"; + interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; + resets = <&arb AXG_ARB_FRDDR_A>, + <&clkc_audio AUD_RESET_FRDDR_A>; + reset-names = "arb", "rst"; + status = "disabled"; + }; + + frddr_b: audio-controller@200 { + compatible = "amlogic,g12a-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x200 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_B"; + interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_B>; + resets = <&arb AXG_ARB_FRDDR_B>, + <&clkc_audio AUD_RESET_FRDDR_B>; + reset-names = "arb", "rst"; + status = "disabled"; + }; + + frddr_c: audio-controller@240 { + compatible = "amlogic,g12a-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x240 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_C"; + interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_C>; + resets = <&arb AXG_ARB_FRDDR_C>, + <&clkc_audio AUD_RESET_FRDDR_C>; + reset-names = "arb", "rst"; + status = "disabled"; + }; + + arb: reset-controller@280 { + status = "disabled"; + compatible = "amlogic,meson-axg-audio-arb"; + reg = <0x0 0x280 0x0 0x4>; + #reset-cells = <1>; + clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; + }; + + tdmin_a: audio-controller@300 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x300 0x0 0x40>; + sound-name-prefix = "TDMIN_A"; + resets = <&clkc_audio AUD_RESET_TDMIN_A>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_b: audio-controller@340 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x340 0x0 0x40>; + sound-name-prefix = "TDMIN_B"; + resets = <&clkc_audio AUD_RESET_TDMIN_B>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_c: audio-controller@380 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x380 0x0 0x40>; + sound-name-prefix = "TDMIN_C"; + resets = <&clkc_audio AUD_RESET_TDMIN_C>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_lb: audio-controller@3c0 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x3c0 0x0 0x40>; + sound-name-prefix = "TDMIN_LB"; + resets = <&clkc_audio AUD_RESET_TDMIN_LB>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + spdifin: audio-controller@400 { + compatible = "amlogic,g12a-spdifin", + "amlogic,axg-spdifin"; + reg = <0x0 0x400 0x0 0x30>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFIN"; + interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_SPDIFIN>, + <&clkc_audio AUD_CLKID_SPDIFIN_CLK>; + clock-names = "pclk", "refclk"; + resets = <&clkc_audio AUD_RESET_SPDIFIN>; + status = "disabled"; + }; + + spdifout: audio-controller@480 { + compatible = "amlogic,g12a-spdifout", + "amlogic,axg-spdifout"; + reg = <0x0 0x480 0x0 0x50>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFOUT"; + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, + <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; + clock-names = "pclk", "mclk"; + resets = <&clkc_audio AUD_RESET_SPDIFOUT>; + status = "disabled"; + }; + + tdmout_a: audio-controller@500 { + compatible = "amlogic,g12a-tdmout"; + reg = <0x0 0x500 0x0 0x40>; + sound-name-prefix = "TDMOUT_A"; + resets = <&clkc_audio AUD_RESET_TDMOUT_A>; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_b: audio-controller@540 { + compatible = "amlogic,g12a-tdmout"; + reg = <0x0 0x540 0x0 0x40>; + sound-name-prefix = "TDMOUT_B"; + resets = <&clkc_audio AUD_RESET_TDMOUT_B>; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_c: audio-controller@580 { + compatible = "amlogic,g12a-tdmout"; + reg = <0x0 0x580 0x0 0x40>; + sound-name-prefix = "TDMOUT_C"; + resets = <&clkc_audio AUD_RESET_TDMOUT_C>; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + spdifout_b: audio-controller@680 { + compatible = "amlogic,g12a-spdifout", + "amlogic,axg-spdifout"; + reg = <0x0 0x680 0x0 0x50>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFOUT_B"; + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>, + <&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>; + clock-names = "pclk", "mclk"; + resets = <&clkc_audio AUD_RESET_SPDIFOUT_B>; + status = "disabled"; + }; + + tohdmitx: audio-controller@744 { + compatible = "amlogic,g12a-tohdmitx"; + reg = <0x0 0x744 0x0 0x4>; + #sound-dai-cells = <1>; + sound-name-prefix = "TOHDMITX"; + resets = <&clkc_audio AUD_RESET_TOHDMITX>; + status = "disabled"; + }; + }; +}; + +&cpu_thermal { + cooling-maps { + map0 { + trip = <&cpu_passive>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +ðmac { + power-domains = <&pwrc PWRC_G12A_ETH_ID>; +}; + +&vpu { + power-domains = <&pwrc PWRC_G12A_VPU_ID>; +}; + +&sd_emmc_a { + amlogic,dram-access-quirk; +}; + +&simplefb_cvbs { + power-domains = <&pwrc PWRC_G12A_VPU_ID>; +}; + +&simplefb_hdmi { + power-domains = <&pwrc PWRC_G12A_VPU_ID>; +}; + diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts index c9fa23a56562..2ac9e3a43b96 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts @@ -438,6 +438,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts index 17155fb73fce..4f2596d82989 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts @@ -409,6 +409,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi index eb5d177d7a99..fb0ab27d1f64 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi @@ -3,8 +3,7 @@ * Copyright (c) 2018 Amlogic, Inc. All rights reserved. */ -#include "meson-g12-common.dtsi" -#include <dt-bindings/power/meson-g12a-power.h> +#include "meson-g12.dtsi" / { compatible = "amlogic,g12a"; @@ -19,6 +18,7 @@ reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -27,6 +27,7 @@ reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -35,6 +36,7 @@ reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -43,6 +45,7 @@ reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; l2: l2-cache0 { @@ -111,14 +114,22 @@ }; }; -ðmac { - power-domains = <&pwrc PWRC_G12A_ETH_ID>; -}; - -&vpu { - power-domains = <&pwrc PWRC_G12A_VPU_ID>; -}; +&cpu_thermal { + cooling-maps { + map0 { + trip = <&cpu_passive>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; -&sd_emmc_a { - amlogic,dram-access-quirk; + map1 { + trip = <&cpu_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts index 3a6a1e0c1e32..124a80901084 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts @@ -14,3 +14,28 @@ / { compatible = "khadas,vim3", "amlogic,a311d", "amlogic,g12b"; }; + +/* + * The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential + * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between + * an USB3.0 Type A connector and a M.2 Key M slot. + * The PHY driving these differential lines is shared between + * the USB3.0 controller and the PCIe Controller, thus only + * a single controller can use it. + * If the MCU is configured to mux the PCIe/USB3.0 differential lines + * to the M.2 Key M slot, uncomment the following block to disable + * USB3.0 from the USB Complex and enable the PCIe controller. + * The End User is not expected to uncomment the following except for + * testing purposes, but instead rely on the firmware/bootloader to + * update these nodes accordingly if PCIe mode is selected by the MCU. + */ +/* +&pcie { + status = "okay"; +}; + +&usb { + phys = <&usb2_phy0>, <&usb2_phy1>; + phy-names = "usb2-phy0", "usb2-phy1"; +}; + */ diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts index 42f15405750c..0e54c1dc2842 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts @@ -12,7 +12,7 @@ #include <dt-bindings/sound/meson-g12a-tohdmitx.h> / { - compatible = "hardkernel,odroid-n2", "amlogic,g12b"; + compatible = "hardkernel,odroid-n2", "amlogic,s922x", "amlogic,g12b"; model = "Hardkernel ODROID-N2"; aliases { diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts index b73deb282120..bba98f982ad6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts @@ -14,3 +14,28 @@ / { compatible = "khadas,vim3", "amlogic,s922x", "amlogic,g12b"; }; + +/* + * The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential + * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between + * an USB3.0 Type A connector and a M.2 Key M slot. + * The PHY driving these differential lines is shared between + * the USB3.0 controller and the PCIe Controller, thus only + * a single controller can use it. + * If the MCU is configured to mux the PCIe/USB3.0 differential lines + * to the M.2 Key M slot, uncomment the following block to disable + * USB3.0 from the USB Complex and enable the PCIe controller. + * The End User is not expected to uncomment the following except for + * testing purposes, but instead rely on the firmware/bootloader to + * update these nodes accordingly if PCIe mode is selected by the MCU. + */ +/* +&pcie { + status = "okay"; +}; + +&usb { + phys = <&usb2_phy0>, <&usb2_phy1>; + phy-names = "usb2-phy0", "usb2-phy1"; +}; + */ diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts new file mode 100644 index 000000000000..ccd0bced01e8 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts @@ -0,0 +1,557 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-g12b.dtsi" +#include "meson-g12b-s922x.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + compatible = "ugoos,am6", "amlogic,g12b"; + model = "Ugoos AM6"; + + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + spdif_dit: audio-codec-1 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + status = "okay"; + sound-name-prefix = "DIT"; + }; + + flash_1v8: regulator-flash_1v8 { + compatible = "regulator-fixed"; + regulator-name = "FLASH_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + main_12v: regulator-main_12v { + compatible = "regulator-fixed"; + regulator-name = "12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + vcc_5v: regulator-vcc_5v { + compatible = "regulator-fixed"; + regulator-name = "VCC_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&main_12v>; + + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-high; + }; + + vcc_1v8: regulator-vcc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + /* FIXME: actually controlled by VDDCPU_B_EN */ + }; + + vddcpu_a: regulator-vddcpu-a { + /* + * MP1653 Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_A"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + vin-supply = <&main_12v>; + + pwms = <&pwm_ab 0 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vddcpu_b: regulator-vddcpu-b { + /* + * MP1652 Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_B"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + vin-supply = <&main_12v>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + usb1_pow: regulator-usb1-pow { + compatible = "regulator-fixed"; + regulator-name = "USB1_POW"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + /* connected to SY6280A Power Switch */ + gpio = <&gpio GPIOA_8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usb_pwr_en: regulator-usb-pwr-en { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR_EN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + /* Connected to USB3 Type-A Port power enable */ + gpio = <&gpio GPIOAO_7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vddao_1v8: regulator-vddao-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&main_12v>; + regulator-always-on; + }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "G12B-UGOOS-AM6"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT", + "SPDIFOUT IN 0", "FRDDR_A OUT 3", + "SPDIFOUT IN 1", "FRDDR_B OUT 3", + "SPDIFOUT IN 2", "FRDDR_C OUT 3"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* spdif hdmi or toslink interface */ + dai-link-4 { + sound-dai = <&spdifout>; + + codec-0 { + sound-dai = <&spdif_dit>; + }; + + codec-1 { + sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>; + }; + }; + + /* spdif hdmi interface */ + dai-link-5 { + sound-dai = <&spdifout_b>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-6 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; +}; + +&arb { + status = "okay"; +}; + +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + status = "disabled"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&clkc_audio { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu100 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu101 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu102 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu103 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&vcc_5v>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; + linux,rc-map-name = "rc-khadas"; +}; + +&pwm_ab { + pinctrl-0 = <&pwm_a_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; + status = "okay"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +&pwm_ef { + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; + status = "okay"; +}; + +/* SDIO */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr50; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_1v8>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <100000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&flash_1v8>; +}; + +&spdifout { + pinctrl-0 = <&spdif_out_h_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&spdifout_b { + status = "okay"; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; + dr_mode = "host"; + vbus-regulator = <&usb_pwr_en>; +}; + +&usb2_phy0 { + phy-supply = <&usb1_pow>; +}; + +&usb2_phy1 { + phy-supply = <&usb1_pow>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi index 5628ccd54531..6dbc3968045b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi @@ -4,8 +4,7 @@ * Author: Neil Armstrong <narmstrong@baylibre.com> */ -#include "meson-g12-common.dtsi" -#include <dt-bindings/power/meson-g12a-power.h> +#include "meson-g12.dtsi" / { compatible = "amlogic,g12b"; @@ -49,7 +48,9 @@ compatible = "arm,cortex-a53"; reg = <0x0 0x0>; enable-method = "psci"; + capacity-dmips-mhz = <592>; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -57,7 +58,9 @@ compatible = "arm,cortex-a53"; reg = <0x0 0x1>; enable-method = "psci"; + capacity-dmips-mhz = <592>; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu100: cpu@100 { @@ -65,7 +68,9 @@ compatible = "arm,cortex-a73"; reg = <0x0 0x100>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu101: cpu@101 { @@ -73,7 +78,9 @@ compatible = "arm,cortex-a73"; reg = <0x0 0x101>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu102: cpu@102 { @@ -81,7 +88,9 @@ compatible = "arm,cortex-a73"; reg = <0x0 0x102>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu103: cpu@103 { @@ -89,7 +98,9 @@ compatible = "arm,cortex-a73"; reg = <0x0 0x103>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; next-level-cache = <&l2>; + #cooling-cells = <2>; }; l2: l2-cache0 { @@ -102,14 +113,3 @@ compatible = "amlogic,g12b-clkc"; }; -ðmac { - power-domains = <&pwrc PWRC_G12A_ETH_ID>; -}; - -&vpu { - power-domains = <&pwrc PWRC_G12A_VPU_ID>; -}; - -&sd_emmc_a { - amlogic,dram-access-quirk; -}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index a9b778571cf5..12d5e333e5f2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -169,6 +169,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 6733050d735f..40db06e28b66 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -161,6 +161,7 @@ #address-cells = <1>; #size-cells = <1>; read-only; + secure-monitor = <&sm>; sn: sn@14 { reg = <0x14 0x10>; @@ -240,7 +241,7 @@ }; i2c_A: i2c@8500 { - compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; + compatible = "amlogic,meson-gxbb-i2c"; reg = <0x0 0x08500 0x0 0x20>; interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; @@ -290,7 +291,7 @@ }; i2c_B: i2c@87c0 { - compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; + compatible = "amlogic,meson-gxbb-i2c"; reg = <0x0 0x087c0 0x0 0x20>; interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; @@ -299,7 +300,7 @@ }; i2c_C: i2c@87e0 { - compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; + compatible = "amlogic,meson-gxbb-i2c"; reg = <0x0 0x087e0 0x0 0x20>; interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; @@ -391,6 +392,7 @@ compatible = "amlogic,meson-gx-ao-cec"; reg = <0x0 0x00100 0x0 0x14>; interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; }; sec_AO: ao-secure@140 { @@ -414,7 +416,7 @@ }; i2c_AO: i2c@500 { - compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; + compatible = "amlogic,meson-gxbb-i2c"; reg = <0x0 0x500 0x0 0x20>; interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts index 233eb1cd7967..d6ca684e0e61 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts @@ -280,6 +280,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddio_ao3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts index afcf8a9f667b..65ec7dea828c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts @@ -220,6 +220,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index 6039adda12ee..6ded279c40c8 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -36,8 +36,15 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + /* + * signal name from schematics: PWREN + */ gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; enable-active-high; + /* + * signal name from schematics: USB_POWER + */ + vin-supply = <&p5v0>; }; leds { @@ -50,18 +57,38 @@ }; }; + p5v0: regulator-p5v0 { + compatible = "regulator-fixed"; + + regulator-name = "P5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + hdmi_p5v0: regulator-hdmi_p5v0 { + compatible = "regulator-fixed"; + regulator-name = "HDMI_P5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + /* AP2331SA-7 */ + vin-supply = <&p5v0>; + }; + tflash_vdd: regulator-tflash_vdd { - /* - * signal name from schematics: TFLASH_VDD_EN - */ compatible = "regulator-fixed"; regulator-name = "TFLASH_VDD"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + /* + * signal name from schematics: TFLASH_VDD_EN + */ gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>; enable-active-high; + /* U16 RT9179GB */ + vin-supply = <&vddio_ao3v3>; }; tf_io: gpio-regulator-tf_io { @@ -79,6 +106,8 @@ states = <3300000 0>, <1800000 1>; + /* U12/U13 RT9179GB */ + vin-supply = <&vddio_ao3v3>; }; vcc1v8: regulator-vcc1v8 { @@ -86,6 +115,9 @@ regulator-name = "VCC1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; + /* U18 RT9179GB */ + vin-supply = <&vddio_ao3v3>; }; vcc3v3: regulator-vcc3v3 { @@ -95,6 +127,36 @@ regulator-max-microvolt = <3300000>; }; + vddio_ao1v8: regulator-vddio-ao1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + /* U17 RT9179GB */ + vin-supply = <&p5v0>; + }; + + vddio_ao3v3: regulator-vddio-ao3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + /* U11 MP2161GJ-C499 */ + vin-supply = <&p5v0>; + }; + + ddr3_1v5: regulator-ddr3_1v5 { + compatible = "regulator-fixed"; + regulator-name = "DDR3_1V5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + /* U15 MP2161GJ-C499 */ + vin-supply = <&p5v0>; + }; + emmc_pwrseq: emmc-pwrseq { compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; @@ -167,6 +229,7 @@ status = "okay"; pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; pinctrl-names = "default"; + hdmi-supply = <&hdmi_p5v0>; }; &hdmi_tx_tmds_port { @@ -296,7 +359,7 @@ }; &usb0_phy { - status = "okay"; + status = "disabled"; phy-supply = <&usb_otg_pwr>; }; @@ -306,7 +369,7 @@ }; &usb0 { - status = "okay"; + status = "disabled"; }; &usb1 { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi index 89f7b41b0e9e..e803a466fe4e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi @@ -170,6 +170,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi index 43b11e3dfe11..5eab3dfdbd55 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi @@ -152,6 +152,7 @@ status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; pinctrl-names = "default"; + linux,rc-map-name = "rc-vega-s9x"; }; &pwm_ef { @@ -183,6 +184,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi index 4c539881fbb7..dee51cf95223 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi @@ -200,6 +200,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts index 82b1c4851147..4d5949496596 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts @@ -14,7 +14,7 @@ / { compatible = "libretech,aml-s805x-ac", "amlogic,s805x", "amlogic,meson-gxl"; - model = "Libre Computer Board AML-S805X-AC"; + model = "Libre Computer AML-S805X-AC"; aliases { serial0 = &uart_AO; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts index 3a1484e5b8e1..a1119cfb0280 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts @@ -165,6 +165,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts index 2a5cd303123d..440bc23c7342 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts @@ -33,11 +33,9 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; - button@0 { + power-button { label = "power"; linux,code = <KEY_POWER>; gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; @@ -192,6 +190,9 @@ bluetooth { compatible = "brcm,bcm43438-bt"; shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index 4b8ce738e213..e8348b2728db 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -12,8 +12,9 @@ #include "meson-gxl-s905x.dtsi" / { - compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl"; - model = "Libre Computer Board AML-S905X-CC"; + compatible = "libretech,aml-s905x-cc", "amlogic,s905x", + "amlogic,meson-gxl"; + model = "Libre Computer AML-S905X-CC"; aliases { serial0 = &uart_AO; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts index c433a031841f..62dd87821ce5 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts @@ -165,6 +165,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi index e3c16f50814b..43eb7d149e36 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi @@ -119,6 +119,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 49ff0a7d0210..ed33d8efaf62 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -36,6 +36,16 @@ phys = <&usb3_phy>, <&usb2_phy0>, <&usb2_phy1>; }; }; + + crypto: crypto@c883e000 { + compatible = "amlogic,gxl-crypto"; + reg = <0x0 0xc883e000 0x0 0x36>; + interrupts = <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_BLKMV>; + clock-names = "blkmv"; + status = "okay"; + }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts index f25ddd18a607..f82f25c1a5f9 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts @@ -332,6 +332,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; @@ -409,6 +412,9 @@ bluetooth { compatible = "brcm,bcm43438-bt"; shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts index 5cd4d35006d0..420a88e9a195 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts @@ -148,6 +148,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts index e2ea6753263b..0bdf51d041ae 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts @@ -35,3 +35,7 @@ reg = <0>; }; }; + +&ir { + linux,rc-map-name = "rc-vega-s9x"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi index a0e677d5a8f7..5ff64a0d2dcf 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi @@ -96,10 +96,10 @@ compatible = "amlogic,meson-gxm-mali", "arm,mali-t820"; reg = <0x0 0xc0000 0x0 0x40000>; interrupt-parent = <&gic>; - interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "gpu", "mmu", "job"; + <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; clocks = <&clkc CLKID_MALI>; resets = <&reset RESET_MALI_CAPB3>, <&reset RESET_MALI>; diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi index 8647da7d6609..90815fa25ec6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi @@ -246,6 +246,10 @@ linux,rc-map-name = "rc-khadas"; }; +&pcie { + reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>; +}; + &pwm_ef { status = "okay"; pinctrl-0 = <&pwm_e_pins>; @@ -274,6 +278,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vsys_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts index 5233bd7cacfb..dbbf29a0dbf6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts @@ -68,3 +68,28 @@ clock-names = "clkin1"; status = "okay"; }; + +/* + * The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential + * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between + * an USB3.0 Type A connector and a M.2 Key M slot. + * The PHY driving these differential lines is shared between + * the USB3.0 controller and the PCIe Controller, thus only + * a single controller can use it. + * If the MCU is configured to mux the PCIe/USB3.0 differential lines + * to the M.2 Key M slot, uncomment the following block to disable + * USB3.0 from the USB Complex and enable the PCIe controller. + * The End User is not expected to uncomment the following except for + * testing purposes, but instead rely on the firmware/bootloader to + * update these nodes accordingly if PCIe mode is selected by the MCU. + */ +/* +&pcie { + status = "okay"; +}; + +&usb { + phys = <&usb2_phy0>, <&usb2_phy1>; + phy-names = "usb2-phy0", "usb2-phy1"; +}; + */ diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts index 3435aaa4e8db..5bd07469766b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts @@ -9,6 +9,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> / { compatible = "seirobotics,sei610", "amlogic,sm1"; @@ -19,6 +20,22 @@ ethernet0 = ðmac; }; + mono_dac: audio-codec-0 { + compatible = "maxim,max98357a"; + #sound-dai-cells = <0>; + sound-name-prefix = "U16"; + sdmode-gpios = <&gpio GPIOX_8 GPIO_ACTIVE_HIGH>; + }; + + dmics: audio-codec-1 { + #sound-dai-cells = <0>; + compatible = "dmic-codec"; + num-channels = <2>; + wakeup-delay-ms = <50>; + status = "okay"; + sound-name-prefix = "MIC"; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -179,6 +196,120 @@ clock-names = "ext_clock"; }; + sound { + compatible = "amlogic,axg-sound-card"; + model = "SM1-SEI610"; + audio-aux-devs = <&tdmout_a>, <&tdmout_b>, + <&tdmin_a>, <&tdmin_b>; + audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", + "TDMOUT_A IN 1", "FRDDR_B OUT 0", + "TDMOUT_A IN 2", "FRDDR_C OUT 0", + "TDM_A Playback", "TDMOUT_A OUT", + "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT", + "TODDR_A IN 4", "PDM Capture", + "TODDR_B IN 4", "PDM Capture", + "TODDR_C IN 4", "PDM Capture", + "TDMIN_A IN 0", "TDM_A Capture", + "TDMIN_A IN 3", "TDM_A Loopback", + "TDMIN_B IN 0", "TDM_A Capture", + "TDMIN_B IN 3", "TDM_A Loopback", + "TDMIN_A IN 1", "TDM_B Capture", + "TDMIN_A IN 4", "TDM_B Loopback", + "TDMIN_B IN 1", "TDM_B Capture", + "TDMIN_B IN 4", "TDM_B Loopback", + "TODDR_A IN 0", "TDMIN_A OUT", + "TODDR_B IN 0", "TDMIN_A OUT", + "TODDR_C IN 0", "TDMIN_A OUT", + "TODDR_A IN 1", "TDMIN_B OUT", + "TODDR_B IN 1", "TDMIN_B OUT", + "TODDR_C IN 1", "TDMIN_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + dai-link-3 { + sound-dai = <&toddr_a>; + }; + + dai-link-4 { + sound-dai = <&toddr_b>; + }; + + dai-link-5 { + sound-dai = <&toddr_c>; + }; + + /* internal speaker interface */ + dai-link-6 { + sound-dai = <&tdmif_a>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&mono_dac>; + }; + + codec-1 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; + }; + }; + + /* 8ch hdmi interface */ + dai-link-7 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* internal digital mics */ + dai-link-8 { + sound-dai = <&pdm>; + + codec { + sound-dai = <&dmics>; + }; + }; + + /* hdmi glue */ + dai-link-9 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; + wifi32k: wifi32k { compatible = "pwm-clock"; #clock-cells = <0>; @@ -187,6 +318,10 @@ }; }; +&arb { + status = "okay"; +}; + &cec_AO { pinctrl-0 = <&cec_ao_a_h_pins>; pinctrl-names = "default"; @@ -201,6 +336,10 @@ hdmi-phandle = <&hdmi_tx>; }; +&clkc_audio { + status = "okay"; +}; + &cpu0 { cpu-supply = <&vddcpu>; operating-points-v2 = <&cpu_opp_table>; @@ -235,6 +374,18 @@ phy-mode = "rmii"; }; +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; @@ -259,6 +410,12 @@ pinctrl-names = "default"; }; +&pdm { + pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_dclk_z_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &pwm_AO_ab { status = "okay"; pinctrl-0 = <&pwm_ao_a_pins>; @@ -305,6 +462,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; @@ -353,6 +513,54 @@ vqmmc-supply = <&emmc_1v8>; }; +&tdmif_a { + pinctrl-0 = <&tdm_a_dout0_pins>, <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>; + pinctrl-names = "default"; + status = "okay"; + + assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD0>, + <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD0>; + assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_A_SCLK>, + <&clkc_audio AUD_CLKID_MST_A_LRCLK>; + assigned-clock-rates = <0>, <0>; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmin_a { + status = "okay"; +}; + +&tdmin_b { + status = "okay"; +}; + +&tdmout_a { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&toddr_a { + status = "okay"; +}; + +&toddr_b { + status = "okay"; +}; + +&toddr_c { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + &uart_A { status = "okay"; pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi index 521573f3a5ba..7894a5458dbc 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi @@ -5,11 +5,47 @@ */ #include "meson-g12-common.dtsi" +#include <dt-bindings/clock/axg-audio-clkc.h> #include <dt-bindings/power/meson-sm1-power.h> +#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h> +#include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h> / { compatible = "amlogic,sm1"; + tdmif_a: audio-controller-0 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_A"; + clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, + <&clkc_audio AUD_CLKID_MST_A_SCLK>, + <&clkc_audio AUD_CLKID_MST_A_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + tdmif_b: audio-controller-1 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_B"; + clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, + <&clkc_audio AUD_CLKID_MST_B_SCLK>, + <&clkc_audio AUD_CLKID_MST_B_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + tdmif_c: audio-controller-2 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_C"; + clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, + <&clkc_audio AUD_CLKID_MST_C_SCLK>, + <&clkc_audio AUD_CLKID_MST_C_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + cpus { #address-cells = <0x2>; #size-cells = <0x0>; @@ -117,6 +153,297 @@ }; }; +&apb { + audio: bus@60000 { + compatible = "simple-bus"; + reg = <0x0 0x60000 0x0 0x1000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x60000 0x0 0x1000>; + + clkc_audio: clock-controller@0 { + status = "disabled"; + compatible = "amlogic,sm1-audio-clkc"; + reg = <0x0 0x0 0x0 0xb4>; + #clock-cells = <1>; + #reset-cells = <1>; + + clocks = <&clkc CLKID_AUDIO>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL3>, + <&clkc CLKID_HIFI_PLL>, + <&clkc CLKID_FCLK_DIV3>, + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_FCLK_DIV5>; + clock-names = "pclk", + "mst_in0", + "mst_in1", + "mst_in2", + "mst_in3", + "mst_in4", + "mst_in5", + "mst_in6", + "mst_in7"; + + resets = <&reset RESET_AUDIO>; + }; + + toddr_a: audio-controller@100 { + compatible = "amlogic,sm1-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x100 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_A"; + interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_A>; + resets = <&arb AXG_ARB_TODDR_A>, + <&clkc_audio AUD_RESET_TODDR_A>; + reset-names = "arb", "rst"; + status = "disabled"; + }; + + toddr_b: audio-controller@140 { + compatible = "amlogic,sm1-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x140 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_B"; + interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_B>; + resets = <&arb AXG_ARB_TODDR_B>, + <&clkc_audio AUD_RESET_TODDR_B>; + reset-names = "arb", "rst"; + status = "disabled"; + }; + + toddr_c: audio-controller@180 { + compatible = "amlogic,sm1-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x180 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_C"; + interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_C>; + resets = <&arb AXG_ARB_TODDR_C>, + <&clkc_audio AUD_RESET_TODDR_C>; + reset-names = "arb", "rst"; + status = "disabled"; + }; + + frddr_a: audio-controller@1c0 { + compatible = "amlogic,sm1-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x1c0 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_A"; + interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; + resets = <&arb AXG_ARB_FRDDR_A>, + <&clkc_audio AUD_RESET_FRDDR_A>; + reset-names = "arb", "rst"; + status = "disabled"; + }; + + frddr_b: audio-controller@200 { + compatible = "amlogic,sm1-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x200 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_B"; + interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_B>; + resets = <&arb AXG_ARB_FRDDR_B>, + <&clkc_audio AUD_RESET_FRDDR_B>; + reset-names = "arb", "rst"; + status = "disabled"; + }; + + frddr_c: audio-controller@240 { + compatible = "amlogic,sm1-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x240 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_C"; + interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_C>; + resets = <&arb AXG_ARB_FRDDR_C>, + <&clkc_audio AUD_RESET_FRDDR_C>; + reset-names = "arb", "rst"; + status = "disabled"; + }; + + arb: reset-controller@280 { + status = "disabled"; + compatible = "amlogic,meson-sm1-audio-arb"; + reg = <0x0 0x280 0x0 0x4>; + #reset-cells = <1>; + clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; + }; + + tdmin_a: audio-controller@300 { + compatible = "amlogic,sm1-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x300 0x0 0x40>; + sound-name-prefix = "TDMIN_A"; + resets = <&clkc_audio AUD_RESET_TDMIN_A>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_b: audio-controller@340 { + compatible = "amlogic,sm1-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x340 0x0 0x40>; + sound-name-prefix = "TDMIN_B"; + resets = <&clkc_audio AUD_RESET_TDMIN_B>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_c: audio-controller@380 { + compatible = "amlogic,sm1-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x380 0x0 0x40>; + sound-name-prefix = "TDMIN_C"; + resets = <&clkc_audio AUD_RESET_TDMIN_C>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_lb: audio-controller@3c0 { + compatible = "amlogic,sm1-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x3c0 0x0 0x40>; + sound-name-prefix = "TDMIN_LB"; + resets = <&clkc_audio AUD_RESET_TDMIN_LB>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_a: audio-controller@500 { + compatible = "amlogic,sm1-tdmout"; + reg = <0x0 0x500 0x0 0x40>; + sound-name-prefix = "TDMOUT_A"; + resets = <&clkc_audio AUD_RESET_TDMOUT_A>; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_b: audio-controller@540 { + compatible = "amlogic,sm1-tdmout"; + reg = <0x0 0x540 0x0 0x40>; + sound-name-prefix = "TDMOUT_B"; + resets = <&clkc_audio AUD_RESET_TDMOUT_B>; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_c: audio-controller@580 { + compatible = "amlogic,sm1-tdmout"; + reg = <0x0 0x580 0x0 0x40>; + sound-name-prefix = "TDMOUT_C"; + resets = <&clkc_audio AUD_RESET_TDMOUT_C>; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tohdmitx: audio-controller@744 { + compatible = "amlogic,sm1-tohdmitx", + "amlogic,g12a-tohdmitx"; + reg = <0x0 0x744 0x0 0x4>; + #sound-dai-cells = <1>; + sound-name-prefix = "TOHDMITX"; + resets = <&clkc_audio AUD_RESET_TOHDMITX>; + status = "disabled"; + }; + + toddr_d: audio-controller@840 { + compatible = "amlogic,sm1-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x840 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_D"; + interrupts = <GIC_SPI 49 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_D>; + resets = <&arb AXG_ARB_TODDR_D>, + <&clkc_audio AUD_RESET_TODDR_D>; + reset-names = "arb", "rst"; + status = "disabled"; + }; + + frddr_d: audio-controller@880 { + compatible = "amlogic,sm1-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x880 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_D"; + interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_D>; + resets = <&arb AXG_ARB_FRDDR_D>, + <&clkc_audio AUD_RESET_FRDDR_D>; + reset-names = "arb", "rst"; + status = "disabled"; + }; + }; + + pdm: audio-controller@61000 { + compatible = "amlogic,sm1-pdm", + "amlogic,axg-pdm"; + reg = <0x0 0x61000 0x0 0x34>; + #sound-dai-cells = <0>; + sound-name-prefix = "PDM"; + clocks = <&clkc_audio AUD_CLKID_PDM>, + <&clkc_audio AUD_CLKID_PDM_DCLK>, + <&clkc_audio AUD_CLKID_PDM_SYSCLK>; + clock-names = "pclk", "dclk", "sysclk"; + status = "disabled"; + }; +}; + &cecb_AO { compatible = "amlogic,meson-sm1-ao-cec"; }; @@ -134,10 +461,27 @@ power-domains = <&pwrc PWRC_SM1_ETH_ID>; }; +&gpio_intc { + compatible = "amlogic,meson-sm1-gpio-intc", + "amlogic,meson-gpio-intc"; +}; + +&pcie { + power-domains = <&pwrc PWRC_SM1_PCIE_ID>; +}; + &pwrc { compatible = "amlogic,meson-sm1-pwrc"; }; +&simplefb_cvbs { + power-domains = <&pwrc PWRC_SM1_VPU_ID>; +}; + +&simplefb_hdmi { + power-domains = <&pwrc PWRC_SM1_VPU_ID>; +}; + &vpu { power-domains = <&pwrc PWRC_SM1_VPU_ID>; }; diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index d1d31ccad758..cb7de8d99223 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 -dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-a-plus.dtb \ +dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-4-b.dtb \ + bcm2837-rpi-3-a-plus.dtb \ bcm2837-rpi-3-b.dtb \ bcm2837-rpi-3-b-plus.dtb \ bcm2837-rpi-cm3-io3.dtb diff --git a/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts new file mode 100644 index 000000000000..d24c53682e44 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts @@ -0,0 +1,2 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "arm/bcm2711-rpi-4-b.dts" diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index a76f620f7f35..6721966140f4 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -18,8 +18,8 @@ / { compatible = "samsung,exynos5433"; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; interrupt-parent = <&gic>; @@ -249,57 +249,6 @@ }; }; - gpu: gpu@14ac0000 { - compatible = "samsung,exynos5433-mali", "arm,mali-t760"; - reg = <0x14ac0000 0x5000>; - interrupts = <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "job", "mmu", "gpu"; - clocks = <&cmu_g3d CLK_ACLK_G3D>; - clock-names = "core"; - power-domains = <&pd_g3d>; - operating-points-v2 = <&gpu_opp_table>; - status = "disabled"; - - gpu_opp_table: opp_table { - compatible = "operating-points-v2"; - - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; - opp-microvolt = <1000000>; - }; - opp-267000000 { - opp-hz = /bits/ 64 <267000000>; - opp-microvolt = <1000000>; - }; - opp-350000000 { - opp-hz = /bits/ 64 <350000000>; - opp-microvolt = <1025000>; - }; - opp-420000000 { - opp-hz = /bits/ 64 <420000000>; - opp-microvolt = <1025000>; - }; - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <1075000>; - }; - opp-550000000 { - opp-hz = /bits/ 64 <550000000>; - opp-microvolt = <1125000>; - }; - opp-600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <1150000>; - }; - opp-700000000 { - opp-hz = /bits/ 64 <700000000>; - opp-microvolt = <1150000>; - }; - }; - }; - psci { compatible = "arm,psci"; method = "smc"; @@ -311,7 +260,7 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x0 0x0 0x0 0x18000000>; chipid@10000000 { compatible = "samsung,exynos4210-chipid"; @@ -754,7 +703,7 @@ status = "disabled"; }; - mct@101c0000 { + timer@101c0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101c0000 0x800>; interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, @@ -1125,6 +1074,57 @@ power-domains = <&pd_gscl>; }; + gpu: gpu@14ac0000 { + compatible = "samsung,exynos5433-mali", "arm,mali-t760"; + reg = <0x14ac0000 0x5000>; + interrupts = <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&cmu_g3d CLK_ACLK_G3D>; + clock-names = "core"; + power-domains = <&pd_g3d>; + operating-points-v2 = <&gpu_opp_table>; + status = "disabled"; + + gpu_opp_table: opp_table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <1000000>; + }; + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-microvolt = <1000000>; + }; + opp-350000000 { + opp-hz = /bits/ 64 <350000000>; + opp-microvolt = <1025000>; + }; + opp-420000000 { + opp-hz = /bits/ 64 <420000000>; + opp-microvolt = <1025000>; + }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1075000>; + }; + opp-550000000 { + opp-hz = /bits/ 64 <550000000>; + opp-microvolt = <1125000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1150000>; + }; + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <1150000>; + }; + }; + }; + scaler_0: scaler@15000000 { compatible = "samsung,exynos5433-scaler"; reg = <0x15000000 0x1294>; @@ -1179,9 +1179,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x13a00000 0x1000>; interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_disp CLK_PCLK_SMMU_DECON0X>, - <&cmu_disp CLK_ACLK_SMMU_DECON0X>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_disp CLK_ACLK_SMMU_DECON0X>, + <&cmu_disp CLK_PCLK_SMMU_DECON0X>; power-domains = <&pd_disp>; #iommu-cells = <0>; }; @@ -1190,9 +1190,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x13a10000 0x1000>; interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_disp CLK_PCLK_SMMU_DECON1X>, - <&cmu_disp CLK_ACLK_SMMU_DECON1X>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_disp CLK_ACLK_SMMU_DECON1X>, + <&cmu_disp CLK_PCLK_SMMU_DECON1X>; #iommu-cells = <0>; power-domains = <&pd_disp>; }; @@ -1201,9 +1201,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x13a20000 0x1000>; interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_disp CLK_PCLK_SMMU_TV0X>, - <&cmu_disp CLK_ACLK_SMMU_TV0X>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_disp CLK_ACLK_SMMU_TV0X>, + <&cmu_disp CLK_PCLK_SMMU_TV0X>; #iommu-cells = <0>; power-domains = <&pd_disp>; }; @@ -1212,9 +1212,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x13a30000 0x1000>; interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_disp CLK_PCLK_SMMU_TV1X>, - <&cmu_disp CLK_ACLK_SMMU_TV1X>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_disp CLK_ACLK_SMMU_TV1X>, + <&cmu_disp CLK_PCLK_SMMU_TV1X>; #iommu-cells = <0>; power-domains = <&pd_disp>; }; @@ -1256,9 +1256,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x15040000 0x1000>; interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_mscl CLK_PCLK_SMMU_M2MSCALER0>, - <&cmu_mscl CLK_ACLK_SMMU_M2MSCALER0>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_mscl CLK_ACLK_SMMU_M2MSCALER0>, + <&cmu_mscl CLK_PCLK_SMMU_M2MSCALER0>; #iommu-cells = <0>; power-domains = <&pd_mscl>; }; @@ -1267,9 +1267,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x15050000 0x1000>; interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_mscl CLK_PCLK_SMMU_M2MSCALER1>, - <&cmu_mscl CLK_ACLK_SMMU_M2MSCALER1>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_mscl CLK_ACLK_SMMU_M2MSCALER1>, + <&cmu_mscl CLK_PCLK_SMMU_M2MSCALER1>; #iommu-cells = <0>; power-domains = <&pd_mscl>; }; @@ -1278,9 +1278,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x15060000 0x1000>; interrupts = <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_mscl CLK_PCLK_SMMU_JPEG>, - <&cmu_mscl CLK_ACLK_SMMU_JPEG>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_mscl CLK_ACLK_SMMU_JPEG>, + <&cmu_mscl CLK_PCLK_SMMU_JPEG>; #iommu-cells = <0>; power-domains = <&pd_mscl>; }; @@ -1289,9 +1289,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x15200000 0x1000>; interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_mfc CLK_PCLK_SMMU_MFC_0>, - <&cmu_mfc CLK_ACLK_SMMU_MFC_0>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_mfc CLK_ACLK_SMMU_MFC_0>, + <&cmu_mfc CLK_PCLK_SMMU_MFC_0>; #iommu-cells = <0>; power-domains = <&pd_mfc>; }; @@ -1300,9 +1300,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x15210000 0x1000>; interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_mfc CLK_PCLK_SMMU_MFC_1>, - <&cmu_mfc CLK_ACLK_SMMU_MFC_1>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_mfc CLK_ACLK_SMMU_MFC_1>, + <&cmu_mfc CLK_PCLK_SMMU_MFC_1>; #iommu-cells = <0>; power-domains = <&pd_mfc>; }; @@ -1452,7 +1452,7 @@ i2s1: i2s@14d60000 { compatible = "samsung,exynos7-i2s"; reg = <0x14d60000 0x100>; - dmas = <&pdma0 31 &pdma0 30>; + dmas = <&pdma0 31>, <&pdma0 30>; dma-names = "tx", "rx"; interrupts = <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu_peric CLK_PCLK_I2S1>, @@ -1811,7 +1811,7 @@ i2s0: i2s@11440000 { compatible = "samsung,exynos7-i2s"; reg = <0x11440000 0x100>; - dmas = <&adma 0 &adma 2>; + dmas = <&adma 0>, <&adma 2>; dma-names = "tx", "rx"; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index bcb9d8cee267..3a00ef0a17ff 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -12,8 +12,8 @@ / { compatible = "samsung,exynos7"; interrupt-parent = <&gic>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; aliases { pinctrl0 = &pinctrl_alive; @@ -78,17 +78,6 @@ }; }; - gpu: gpu@14ac0000 { - compatible = "samsung,exynos5433-mali", "arm,mali-t760"; - reg = <0x14ac0000 0x5000>; - interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "job", "mmu", "gpu"; - status = "disabled"; - /* TODO: operating points for DVFS, cooling device */ - }; - psci { compatible = "arm,psci-0.2"; method = "smc"; @@ -98,7 +87,7 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0 0 0 0x18000000>; chipid@10000000 { compatible = "samsung,exynos4210-chipid"; @@ -523,6 +512,17 @@ status = "disabled"; }; + gpu: gpu@14ac0000 { + compatible = "samsung,exynos5433-mali", "arm,mali-t760"; + reg = <0x14ac0000 0x5000>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + status = "disabled"; + /* TODO: operating points for DVFS, cooling device */ + }; + mmc_0: mmc@15740000 { compatible = "samsung,exynos7-dw-mshc-smu"; interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 93fce8f0c66d..38e344a2f0ff 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -22,6 +22,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb @@ -31,4 +32,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb + +dtb-$(CONFIG_ARCH_S32) += s32v234-evb.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts index 078a5010228c..5b9d4b35dd35 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts @@ -194,8 +194,6 @@ }; fpga@66 { - #address-cells = <1>; - #size-cells = <0>; compatible = "fsl,ls1028aqds-fpga", "fsl,fpga-qixis-i2c", "simple-mfd"; reg = <0x66>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts index 1a69221d9a1b..9720a190049f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts @@ -184,3 +184,7 @@ &sata { status = "okay"; }; + +&usb1 { + dr_mode = "otg"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 72b9a75976a1..8e8a77eb596a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -82,22 +82,8 @@ dpclk: clock-controller@f1f0000 { compatible = "fsl,ls1028a-plldig"; reg = <0x0 0xf1f0000 0x0 0xffff>; - #clock-cells = <1>; - clocks = <&osc_27m>; - }; - - aclk: clock-axi { - compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <650000000>; - clock-output-names= "aclk"; - }; - - pclk: clock-apb { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <650000000>; - clock-output-names= "pclk"; + clocks = <&osc_27m>; }; reboot { @@ -142,6 +128,37 @@ }; }; + thermal-zones { + core-cluster { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 0>; + + trips { + core_cluster_alert: core-cluster-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + core_cluster_crit: core-cluster-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&core_cluster_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + soc: soc { compatible = "simple-bus"; #address-cells = <2>; @@ -542,7 +559,7 @@ status = "disabled"; }; - tmu: tmu@1f00000 { + tmu: tmu@1f80000 { compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f80000 0x0 0x10000>; interrupts = <0 23 0x4>; @@ -594,37 +611,6 @@ #thermal-sensor-cells = <1>; }; - thermal-zones { - core-cluster { - polling-delay-passive = <1000>; - polling-delay = <5000>; - thermal-sensors = <&tmu 0>; - - trips { - core_cluster_alert: core-cluster-alert { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - - core_cluster_crit: core-cluster-crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&core_cluster_alert>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - }; - pcie@1f0000000 { /* Integrated Endpoint Root Complex */ compatible = "pci-host-ecam-generic"; reg = <0x01 0xf0000000 0x0 0x100000>; @@ -679,7 +665,8 @@ interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, <0 223 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "DE", "SE"; - clocks = <&dpclk 0>, <&aclk>, <&aclk>, <&pclk>; + clocks = <&dpclk>, <&clockgen 2 2>, <&clockgen 2 2>, + <&clockgen 2 2>; clock-names = "pxlclk", "mclk", "aclk", "pclk"; arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; arm,malidp-arqos-value = <0xd000d000>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts index 6a6514d0e5a9..0c742befb761 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts @@ -122,6 +122,10 @@ }; }; +&usb1 { + dr_mode = "otg"; +}; + #include "fsl-ls1046-post.dtsi" &fman0 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts index 8e925df6c01c..90b198939251 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts @@ -95,5 +95,6 @@ }; &usb1 { + dr_mode = "otg"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index b032f3890c8c..e883fe0fc1b7 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> /memreserve/ 0x80000000 0x00010000; @@ -20,7 +21,7 @@ #size-cells = <0>; // 8 clusters having 2 Cortex-A72 cores each - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -34,9 +35,10 @@ i-cache-sets = <192>; next-level-cache = <&cluster0_l2>; cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -50,9 +52,10 @@ i-cache-sets = <192>; next-level-cache = <&cluster0_l2>; cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@100 { + cpu100: cpu@100 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -66,9 +69,10 @@ i-cache-sets = <192>; next-level-cache = <&cluster1_l2>; cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@101 { + cpu101: cpu@101 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -82,9 +86,10 @@ i-cache-sets = <192>; next-level-cache = <&cluster1_l2>; cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@200 { + cpu200: cpu@200 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -98,9 +103,10 @@ i-cache-sets = <192>; next-level-cache = <&cluster2_l2>; cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@201 { + cpu201: cpu@201 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -114,9 +120,10 @@ i-cache-sets = <192>; next-level-cache = <&cluster2_l2>; cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@300 { + cpu300: cpu@300 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -130,9 +137,10 @@ i-cache-sets = <192>; next-level-cache = <&cluster3_l2>; cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@301 { + cpu301: cpu@301 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -146,9 +154,10 @@ i-cache-sets = <192>; next-level-cache = <&cluster3_l2>; cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@400 { + cpu400: cpu@400 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -162,9 +171,10 @@ i-cache-sets = <192>; next-level-cache = <&cluster4_l2>; cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@401 { + cpu401: cpu@401 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -178,9 +188,10 @@ i-cache-sets = <192>; next-level-cache = <&cluster4_l2>; cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@500 { + cpu500: cpu@500 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -194,9 +205,10 @@ i-cache-sets = <192>; next-level-cache = <&cluster5_l2>; cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@501 { + cpu501: cpu@501 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -210,9 +222,10 @@ i-cache-sets = <192>; next-level-cache = <&cluster5_l2>; cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@600 { + cpu600: cpu@600 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -226,9 +239,10 @@ i-cache-sets = <192>; next-level-cache = <&cluster6_l2>; cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@601 { + cpu601: cpu@601 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -242,9 +256,10 @@ i-cache-sets = <192>; next-level-cache = <&cluster6_l2>; cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@700 { + cpu700: cpu@700 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -258,9 +273,10 @@ i-cache-sets = <192>; next-level-cache = <&cluster7_l2>; cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@701 { + cpu701: cpu@701 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -274,6 +290,7 @@ i-cache-sets = <192>; next-level-cache = <&cluster7_l2>; cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; cluster0_l2: l2-cache0 { @@ -418,6 +435,51 @@ clock-output-names = "sysclk"; }; + thermal-zones { + core_thermal1: core-thermal1 { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 0>; + + trips { + core_cluster_alert: core-cluster-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + core_cluster_crit: core-cluster-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&core_cluster_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu200 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu201 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu300 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu301 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu400 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu401 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu500 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu501 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu600 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu601 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu700 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu701 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -478,6 +540,20 @@ little-endian; }; + tmu: tmu@1f80000 { + compatible = "fsl,qoriq-tmu"; + reg = <0x0 0x1f80000 0x0 0x10000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + fsl,tmu-range = <0x800000e6 0x8001017d>; + fsl,tmu-calibration = + /* Calibration data group 1 */ + <0x00000000 0x00000035 + /* Calibration data group 2 */ + 0x00010001 0x00000154>; + little-endian; + #thermal-sensor-cells = <1>; + }; + i2c0: i2c@2000000 { compatible = "fsl,vf610-i2c"; #address-cells = <1>; @@ -586,6 +662,7 @@ reg = <0x0 0x2140000 0x0 0x10000>; interrupts = <0 28 0x4>; /* Level high type */ clocks = <&clockgen 4 1>; + dma-coherent; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; little-endian; @@ -598,6 +675,7 @@ reg = <0x0 0x2150000 0x0 0x10000>; interrupts = <0 63 0x4>; /* Level high type */ clocks = <&clockgen 4 1>; + dma-coherent; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; broken-cd; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts index f7a15f3904c2..28ab17a277bb 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts @@ -62,6 +62,8 @@ cpudai: simple-audio-card,cpu { sound-dai = <&sai3>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <32>; }; simple-audio-card,codec { @@ -94,68 +96,6 @@ }; }; -&sai3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sai3>; - assigned-clocks = <&clk IMX8MM_CLK_SAI3>; - assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; - assigned-clock-rates = <24576000>; - status = "okay"; -}; - -&snvs_pwrkey { - status = "okay"; -}; - -&uart2 { /* console */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&usbotg1 { - dr_mode = "otg"; - hnp-disable; - srp-disable; - adp-disable; - usb-role-switch; - status = "okay"; - - port { - usb1_drd_sw: endpoint { - remote-endpoint = <&typec1_dr_sw>; - }; - }; -}; - -&usdhc2 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; - pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; - pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; - cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - bus-width = <4>; - vmmc-supply = <®_usdhc2_vmmc>; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc3>; - pinctrl-1 = <&pinctrl_usdhc3_100mhz>; - pinctrl-2 = <&pinctrl_usdhc3_200mhz>; - bus-width = <8>; - non-removable; - status = "okay"; -}; - -&wdog1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdog>; - fsl,ext-reset-output; - status = "okay"; -}; - &i2c1 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -306,6 +246,86 @@ }; }; +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + pca6416: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MM_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart2 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + usb-role-switch; + status = "okay"; + + port { + usb1_drd_sw: endpoint { + remote-endpoint = <&typec1_dr_sw>; + }; + }; +}; + +&usdhc2 { + assigned-clocks = <&clk IMX8MM_CLK_USDHC2>; + assigned-clock-rates = <200000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&usdhc3 { + assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + &iomuxc { pinctrl-names = "default"; @@ -355,6 +375,13 @@ >; }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + pinctrl_pmic: pmicirq { fsl,pins = < MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index 23c8fad7932b..6edbdfe2d0d7 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -12,7 +12,6 @@ #include "imx8mm-pinfunc.h" / { - compatible = "fsl,imx8mm"; interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; @@ -426,7 +425,7 @@ }; ocotp: ocotp-ctrl@30350000 { - compatible = "fsl,imx8mm-ocotp", "fsl,imx7d-ocotp", "syscon"; + compatible = "fsl,imx8mm-ocotp", "syscon"; reg = <0x30350000 0x10000>; clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>; /* For nvmem subnodes */ @@ -479,14 +478,18 @@ <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_IPG_AUDIO_ROOT>, <&clk IMX8MM_SYS_PLL3>, - <&clk IMX8MM_VIDEO_PLL1>; + <&clk IMX8MM_VIDEO_PLL1>, + <&clk IMX8MM_AUDIO_PLL1>, + <&clk IMX8MM_AUDIO_PLL2>; assigned-clock-parents = <&clk IMX8MM_SYS_PLL3_OUT>, <&clk IMX8MM_SYS_PLL1_800M>; assigned-clock-rates = <0>, <400000000>, <400000000>, <750000000>, - <594000000>; + <594000000>, + <393216000>, + <361267200>; }; src: reset-controller@30390000 { @@ -698,8 +701,6 @@ <&clk IMX8MM_CLK_NAND_USDHC_BUS>, <&clk IMX8MM_CLK_USDHC1_ROOT>; clock-names = "ipg", "ahb", "per"; - assigned-clocks = <&clk IMX8MM_CLK_USDHC1>; - assigned-clock-rates = <400000000>; fsl,tuning-start-tap = <20>; fsl,tuning-step= <2>; bus-width = <4>; @@ -728,8 +729,6 @@ <&clk IMX8MM_CLK_NAND_USDHC_BUS>, <&clk IMX8MM_CLK_USDHC3_ROOT>; clock-names = "ipg", "ahb", "per"; - assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>; - assigned-clock-rates = <400000000>; fsl,tuning-start-tap = <20>; fsl,tuning-step= <2>; bus-width = <4>; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts index 11c705d225d0..071949412caf 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts @@ -6,205 +6,18 @@ /dts-v1/; #include "imx8mn.dtsi" +#include "imx8mn-evk.dtsi" / { model = "NXP i.MX8MNano DDR4 EVK board"; compatible = "fsl,imx8mn-ddr4-evk", "fsl,imx8mn"; - - chosen { - stdout-path = &uart2; - }; - - reg_usdhc2_vmmc: regulator-usdhc2 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; - regulator-name = "VSD_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; }; &A53_0 { cpu-supply = <&buck2_reg>; }; -&iomuxc { - pinctrl-names = "default"; - - pinctrl_fec1: fec1grp { - fsl,pins = < - MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3 - MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 - MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f - MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f - MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f - MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f - MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 - MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 - MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 - MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 - MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f - MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 - MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 - MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f - MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 - MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 - >; - }; - - pinctrl_pmic: pmicirq { - fsl,pins = < - MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 - >; - }; - - pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc { - fsl,pins = < - MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 - MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 - >; - }; - - pinctrl_usdhc2_gpio: usdhc2grpgpio { - fsl,pins = < - MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 - MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 - MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 - MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 - MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 - MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 - MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 - >; - }; - - pinctrl_usdhc2_100mhz: usdhc2grp100mhz { - fsl,pins = < - MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 - MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 - MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 - MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 - MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 - MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 - MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 - >; - }; - - pinctrl_usdhc2_200mhz: usdhc2grp200mhz { - fsl,pins = < - MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 - MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 - MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 - MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 - MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 - MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 - MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 - >; - }; - - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000190 - MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 - MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 - MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 - MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 - MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 - MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 - MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 - MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 - MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 - MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 - >; - }; - - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { - fsl,pins = < - MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000194 - MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 - MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 - MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 - MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 - MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 - MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 - MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 - MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 - MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 - MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 - >; - }; - - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { - fsl,pins = < - MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000196 - MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 - MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 - MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 - MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 - MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 - MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 - MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 - MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 - MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 - MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 - >; - }; - - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 - >; - }; -}; - -&fec1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec1>; - phy-mode = "rgmii-id"; - phy-handle = <ðphy0>; - fsl,magic-packet; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy0: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - at803x,led-act-blind-workaround; - at803x,eee-disabled; - at803x,vddio-1p8v; - }; - }; -}; - &i2c1 { - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; - pmic@4b { compatible = "rohm,bd71847"; reg = <0x4b>; @@ -309,40 +122,10 @@ }; }; -&snvs_pwrkey { - status = "okay"; -}; - -&uart2 { /* console */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; - pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; - pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; - cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - bus-width = <4>; - vmmc-supply = <®_usdhc2_vmmc>; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc3>; - pinctrl-1 = <&pinctrl_usdhc3_100mhz>; - pinctrl-2 = <&pinctrl_usdhc3_200mhz>; - bus-width = <8>; - non-removable; - status = "okay"; -}; - -&wdog1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdog>; - fsl,ext-reset-output; - status = "okay"; +&iomuxc { + pinctrl_pmic: pmicirq { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 + >; + }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts new file mode 100644 index 000000000000..61f351958618 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 NXP + */ + +/dts-v1/; + +#include "imx8mn.dtsi" +#include "imx8mn-evk.dtsi" + +/ { + model = "NXP i.MX8MNano EVK board"; + compatible = "fsl,imx8mn-evk", "fsl,imx8mn"; +}; + +&A53_0 { + /delete-property/operating-points-v2; +}; + +&A53_1 { + /delete-property/operating-points-v2; +}; + +&A53_2 { + /delete-property/operating-points-v2; +}; + +&A53_3 { + /delete-property/operating-points-v2; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi new file mode 100644 index 000000000000..2a74330aee8c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi @@ -0,0 +1,249 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 NXP + */ + +#include "imx8mn.dtsi" + +/ { + chosen { + stdout-path = &uart2; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_led>; + + status { + label = "yellow:status"; + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart2 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usdhc2 { + assigned-clocks = <&clk IMX8MN_CLK_USDHC2>; + assigned-clock-rates = <200000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&usdhc3 { + assigned-clocks = <&clk IMX8MN_CLK_USDHC3_ROOT>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19 + >; + }; + + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < + MX8MN_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc { + fsl,pins = < + MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2grpgpio { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000190 + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000194 + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000196 + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index 43c4db312146..e91625063f8e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -11,7 +11,6 @@ #include "imx8mn-pinfunc.h" / { - compatible = "fsl,imx8mn"; interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; @@ -43,6 +42,19 @@ #address-cells = <1>; #size-cells = <0>; + idle-states { + entry-method = "psci"; + + cpu_pd_wait: cpu-pd-wait { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010033>; + local-timer-stop; + entry-latency-us = <1000>; + exit-latency-us = <700>; + min-residency-us = <2700>; + }; + }; + A53_0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53"; @@ -54,6 +66,7 @@ operating-points-v2 = <&a53_opp_table>; nvmem-cells = <&cpu_speed_grade>; nvmem-cell-names = "speed_grade"; + cpu-idle-states = <&cpu_pd_wait>; }; A53_1: cpu@1 { @@ -65,6 +78,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; + cpu-idle-states = <&cpu_pd_wait>; }; A53_2: cpu@2 { @@ -76,6 +90,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; + cpu-idle-states = <&cpu_pd_wait>; }; A53_3: cpu@3 { @@ -87,6 +102,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; + cpu-idle-states = <&cpu_pd_wait>; }; A53_L2: l2-cache0 { @@ -320,7 +336,7 @@ }; ocotp: ocotp-ctrl@30350000 { - compatible = "fsl,imx8mn-ocotp", "fsl,imx7d-ocotp", "syscon"; + compatible = "fsl,imx8mn-ocotp", "fsl,imx8mm-ocotp", "syscon"; reg = <0x30350000 0x10000>; clocks = <&clk IMX8MN_CLK_OCOTP_ROOT>; #address-cells = <1>; @@ -371,7 +387,7 @@ }; src: reset-controller@30390000 { - compatible = "fsl,imx8mn-src", "syscon"; + compatible = "fsl,imx8mn-src", "fsl,imx8mq-src", "syscon"; reg = <0x30390000 0x10000>; interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; #reset-cells = <1>; @@ -428,6 +444,14 @@ #pwm-cells = <2>; status = "disabled"; }; + + system_counter: timer@306a0000 { + compatible = "nxp,sysctr-timer"; + reg = <0x306a0000 0x20000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc_24m>; + clock-names = "per"; + }; }; aips3: bus@30800000 { @@ -573,8 +597,6 @@ <&clk IMX8MN_CLK_NAND_USDHC_BUS>, <&clk IMX8MN_CLK_USDHC1_ROOT>; clock-names = "ipg", "ahb", "per"; - assigned-clocks = <&clk IMX8MN_CLK_USDHC1>; - assigned-clock-rates = <400000000>; fsl,tuning-start-tap = <20>; fsl,tuning-step= <2>; bus-width = <4>; @@ -603,8 +625,6 @@ <&clk IMX8MN_CLK_NAND_USDHC_BUS>, <&clk IMX8MN_CLK_USDHC3_ROOT>; clock-names = "ipg", "ahb", "per"; - assigned-clocks = <&clk IMX8MN_CLK_USDHC3_ROOT>; - assigned-clock-rates = <400000000>; fsl,tuning-start-tap = <20>; fsl,tuning-step= <2>; bus-width = <4>; @@ -738,6 +758,12 @@ interrupt-controller; interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; + + ddr-pmu@3d800000 { + compatible = "fsl,imx8mn-ddr-pmu", "fsl,imx8m-ddr-pmu"; + reg = <0x3d800000 0x400000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + }; }; usbphynop1: usbphynop1 { diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts index 05958124f173..c36685916683 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -48,6 +48,15 @@ gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; states = <1000000 0x0 900000 0x1>; + regulator-boot-on; + regulator-always-on; + }; + + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ir>; }; wm8524: audio-codec { @@ -115,15 +124,6 @@ }; }; -&sai2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sai2>; - assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1_BYPASS>, <&clk IMX8MQ_CLK_SAI2>; - assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL1_OUT>; - assigned-clock-rates = <0>, <24576000>; - status = "okay"; -}; - &gpio5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wifi_reset>; @@ -242,6 +242,29 @@ power-supply = <&sw1a_reg>; }; +&qspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + status = "okay"; + + n25q256a: flash@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q256a", "jedec,spi-nor"; + spi-max-frequency = <29000000>; + }; +}; + +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1_BYPASS>, <&clk IMX8MQ_CLK_SAI2>; + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL1_OUT>; + assigned-clock-rates = <0>, <24576000>; + status = "okay"; +}; + &snvs_pwrkey { status = "okay"; }; @@ -261,21 +284,9 @@ status = "okay"; }; -&qspi0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_qspi>; - status = "okay"; - - n25q256a: flash@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - compatible = "micron,n25q256a", "jedec,spi-nor"; - spi-max-frequency = <29000000>; - }; -}; - &usdhc1 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; + assigned-clock-rates = <400000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; pinctrl-1 = <&pinctrl_usdhc1_100mhz>; @@ -289,6 +300,8 @@ }; &usdhc2 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; + assigned-clock-rates = <200000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>; pinctrl-1 = <&pinctrl_usdhc2_100mhz>; @@ -340,6 +353,12 @@ >; }; + pinctrl_ir: irgrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x4f + >; + }; + pinctrl_pcie0: pcie0grp { fsl,pins = < MX8MQ_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B 0x76 diff --git a/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts b/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts index f52e872ac96f..b8cb20c01a79 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts @@ -110,6 +110,8 @@ }; &usdhc2 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; + assigned-clock-rates = <200000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts index 683a11035643..2a759dff9f87 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts @@ -780,6 +780,8 @@ }; &usdhc1 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; + assigned-clock-rates = <400000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; pinctrl-1 = <&pinctrl_usdhc1_100mhz>; @@ -790,6 +792,8 @@ }; &usdhc2 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; + assigned-clock-rates = <200000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>; pinctrl-1 = <&pinctrl_usdhc2_100mhz>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts index c832bf0fcc60..81d269296610 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts @@ -191,6 +191,8 @@ }; &usdhc1 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; + assigned-clock-rates = <400000000>; bus-width = <8>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts b/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts index 8a4aee2348ee..59da96b7143f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts @@ -207,6 +207,8 @@ }; &usdhc1 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; + assigned-clock-rates = <400000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; pinctrl-1 = <&pinctrl_usdhc1_100mhz>; @@ -217,6 +219,8 @@ }; &usdhc2 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; + assigned-clock-rates = <200000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi index d7f03c65832b..3dc44114da0e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi @@ -170,6 +170,8 @@ }; &usdhc1 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; + assigned-clock-rates = <400000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; pinctrl-1 = <&pinctrl_usdhc1_100mhz>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi index 32ce14936b01..6a55165bd76a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi @@ -62,7 +62,16 @@ reg_3p3_main: regulator-3p3-main { compatible = "regulator-fixed"; vin-supply = <®_12p0_main>; - regulator-name = "3V3V_MAIN"; + regulator-name = "3V3_MAIN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_gen_3p3: regulator-gen-3p3 { + compatible = "regulator-fixed"; + vin-supply = <®_3p3_main>; + regulator-name = "GEN_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; @@ -72,7 +81,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_usdhc2>; compatible = "regulator-fixed"; - vin-supply = <®_3p3_main>; + vin-supply = <®_gen_3p3>; regulator-name = "3V3_SD"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -253,6 +262,18 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + accelerometer@1c { + compatible = "fsl,mma8451"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_accel>; + reg = <0x1c>; + interrupt-parent = <&gpio3>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "INT2"; + vdd-supply = <®_gen_3p3>; + vddio-supply = <®_gen_3p3>; + }; + ucs1002: charger@32 { compatible = "microchip,ucs1002"; pinctrl-names = "default"; @@ -379,6 +400,11 @@ reg = <0x2c>; reset-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; }; + + watchdog@38 { + compatible = "zii,rave-wdt"; + reg = <0x38>; + }; }; &i2c4 { @@ -486,6 +512,8 @@ }; &usdhc1 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; + assigned-clock-rates = <400000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; pinctrl-1 = <&pinctrl_usdhc1_100mhz>; @@ -499,6 +527,8 @@ }; &usdhc2 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; + assigned-clock-rates = <200000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>; pinctrl-1 = <&pinctrl_usdhc2_100mhz>; @@ -513,6 +543,12 @@ }; &iomuxc { + pinctrl_accel: accelgrp { + fsl,pins = < + MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0x41 + >; + }; + pinctrl_fec1: fec1grp { fsl,pins = < MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 55a3d1c4bdf0..7f9319452b58 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -235,12 +235,26 @@ thermal-sensors = <&tmu 1>; trips { + gpu_alert: gpu-alert { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + gpu-crit { temperature = <90000>; hysteresis = <2000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&gpu_alert>; + cooling-device = + <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; vpu-thermal { @@ -854,8 +868,6 @@ <&clk IMX8MQ_CLK_NAND_USDHC_BUS>, <&clk IMX8MQ_CLK_USDHC1_ROOT>; clock-names = "ipg", "ahb", "per"; - assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; - assigned-clock-rates = <400000000>; fsl,tuning-start-tap = <20>; fsl,tuning-step = <2>; bus-width = <4>; @@ -949,6 +961,7 @@ <&clk IMX8MQ_CLK_GPU_AXI>, <&clk IMX8MQ_CLK_GPU_AHB>; clock-names = "core", "shader", "bus", "reg"; + #cooling-cells = <2>; assigned-clocks = <&clk IMX8MQ_CLK_GPU_CORE_SRC>, <&clk IMX8MQ_CLK_GPU_SHADER_SRC>, <&clk IMX8MQ_CLK_GPU_AXI>, diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts index 91eef9754101..a3f8cf195974 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts @@ -133,6 +133,8 @@ &usdhc1 { #address-cells = <1>; #size-cells = <0>; + assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>; + assigned-clock-rates = <200000000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; bus-width = <4>; @@ -149,6 +151,8 @@ /* SD */ &usdhc2 { + assigned-clocks = <&clk IMX_CONN_SDHC1_CLK>; + assigned-clock-rates = <200000000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <4>; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts new file mode 100644 index 000000000000..6b21a295c126 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright 2019 Toradex + */ + +/dts-v1/; + +#include "imx8qxp-colibri.dtsi" +#include "imx8qxp-colibri-eval-v3.dtsi" + +/ { + model = "Toradex Colibri iMX8QXP/DX on Colibri Evaluation Board V3"; + compatible = "toradex,colibri-imx8x-eval-v3", + "toradex,colibri-imx8x", "fsl,imx8qxp"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi new file mode 100644 index 000000000000..c7336f387605 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright 2019 Toradex + */ + +#include "dt-bindings/input/linux-event-codes.h" + +/ { + aliases { + rtc0 = &rtc_i2c; + rtc1 = &rtc; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys>; + + wakeup { + label = "Wake-Up"; + gpios = <&lsio_gpio3 10 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; +}; + +&adma_i2c1 { + status = "okay"; + + /* M41T0M6 real time clock on carrier board */ + rtc_i2c: rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; +}; + +/* Colibri UART_B */ +&adma_lpuart0 { + status= "okay"; +}; + +/* Colibri UART_C */ +&adma_lpuart2 { + status= "okay"; +}; + +/* Colibri UART_A */ +&adma_lpuart3 { + status= "okay"; +}; + +/* Colibri FastEthernet */ +&fec1 { + status = "okay"; +}; + +/* Colibri SD/MMC Card */ +&usdhc2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi new file mode 100644 index 000000000000..75f17a29f81e --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi @@ -0,0 +1,598 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright 2019 Toradex + */ + +#include "imx8qxp.dtsi" + +/ { + model = "Toradex Colibri iMX8QXP/DX Module"; + compatible = "toradex,colibri-imx8x", "fsl,imx8qxp"; + + chosen { + stdout-path = &adma_lpuart3; + }; + + reg_module_3v3: regulator-module-3v3 { + compatible = "regulator-fixed"; + regulator-name = "+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +/* On-module I2C */ +&adma_i2c0 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>, <&pinctrl_sgtl5000_usb_clk>; + status = "okay"; + + /* Touch controller */ + touchscreen@2c { + compatible = "adi,ad7879-1"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ad7879_int>; + reg = <0x2c>; + interrupt-parent = <&lsio_gpio3>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + touchscreen-max-pressure = <4096>; + adi,resistance-plate-x = <120>; + adi,first-conversion-delay = /bits/ 8 <3>; + adi,acquisition-time = /bits/ 8 <1>; + adi,median-filter-size = /bits/ 8 <2>; + adi,averaging = /bits/ 8 <1>; + adi,conversion-interval = /bits/ 8 <255>; + }; +}; + +/* Colibri I2C */ +&adma_i2c1 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; +}; + +/* Colibri UART_B */ +&adma_lpuart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart0>; +}; + +/* Colibri UART_C */ +&adma_lpuart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart2>; +}; + +/* Colibri UART_A */ +&adma_lpuart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart3>, <&pinctrl_lpuart3_ctrl>; +}; + +/* Colibri FastEthernet */ +&fec1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_fec1>; + pinctrl-1 = <&pinctrl_fec1_sleep>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + fsl,magic-packet; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c22"; + max-speed = <100>; + reg = <2>; + }; + }; +}; + +/* On-module eMMC */ +&usdhc1 { + bus-width = <8>; + non-removable; + no-sd; + no-sdio; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + status = "okay"; +}; + +/* Colibri SD/MMC Card */ +&usdhc2 { + bus-width = <4>; + cd-gpios = <&lsio_gpio3 9 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_module_3v3>; + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>; + disable-wp; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ext_io0>, <&pinctrl_hog0>, <&pinctrl_hog1>; + + /* On-module touch pen-down interrupt */ + pinctrl_ad7879_int: ad7879intgrp { + fsl,pins = < + IMX8QXP_MIPI_CSI0_I2C0_SCL_LSIO_GPIO3_IO05 0x21 + >; + }; + + /* Colibri Analogue Inputs */ + pinctrl_adc0: adc0grp { + fsl,pins = < + IMX8QXP_ADC_IN0_ADMA_ADC_IN0 0x60 /* SODIMM 8 */ + IMX8QXP_ADC_IN1_ADMA_ADC_IN1 0x60 /* SODIMM 6 */ + IMX8QXP_ADC_IN4_ADMA_ADC_IN4 0x60 /* SODIMM 4 */ + IMX8QXP_ADC_IN5_ADMA_ADC_IN5 0x60 /* SODIMM 2 */ + >; + }; + + pinctrl_can_int: canintgrp { + fsl,pins = < + IMX8QXP_QSPI0A_DQS_LSIO_GPIO3_IO13 0x40 /* SODIMM 73 */ + >; + }; + + pinctrl_csi_ctl: csictlgrp { + fsl,pins = < + IMX8QXP_QSPI0A_SS0_B_LSIO_GPIO3_IO14 0x20 /* SODIMM 77 */ + IMX8QXP_QSPI0A_SS1_B_LSIO_GPIO3_IO15 0x20 /* SODIMM 89 */ + >; + }; + + pinctrl_ext_io0: extio0grp { + fsl,pins = < + IMX8QXP_ENET0_RGMII_RXD3_LSIO_GPIO5_IO08 0x06000040 /* SODIMM 135 */ + >; + }; + + /* Colibri Ethernet: On-module 100Mbps PHY Micrel KSZ8041 */ + pinctrl_fec1: fec1grp { + fsl,pins = < + IMX8QXP_ENET0_MDC_CONN_ENET0_MDC 0x06000020 + IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020 + IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x61 + IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RCLK50M_OUT 0x06000061 + IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x61 + IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x61 + IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x61 + IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x61 + IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x61 + IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RMII_RX_ER 0x61 + >; + }; + + pinctrl_fec1_sleep: fec1slpgrp { + fsl,pins = < + IMX8QXP_ENET0_MDC_LSIO_GPIO5_IO11 0x06000041 + IMX8QXP_ENET0_MDIO_LSIO_GPIO5_IO10 0x06000041 + IMX8QXP_ENET0_RGMII_TX_CTL_LSIO_GPIO4_IO30 0x41 + IMX8QXP_ENET0_RGMII_TXC_LSIO_GPIO4_IO29 0x41 + IMX8QXP_ENET0_RGMII_TXD0_LSIO_GPIO4_IO31 0x41 + IMX8QXP_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00 0x41 + IMX8QXP_ENET0_RGMII_RX_CTL_LSIO_GPIO5_IO04 0x41 + IMX8QXP_ENET0_RGMII_RXD0_LSIO_GPIO5_IO05 0x41 + IMX8QXP_ENET0_RGMII_RXD1_LSIO_GPIO5_IO06 0x41 + IMX8QXP_ENET0_RGMII_RXD2_LSIO_GPIO5_IO07 0x41 + >; + }; + + /* Colibri optional CAN on UART_B RTS/CTS */ + pinctrl_flexcan1: flexcan0grp { + fsl,pins = < + IMX8QXP_FLEXCAN0_TX_ADMA_FLEXCAN0_TX 0x21 /* SODIMM 32 */ + IMX8QXP_FLEXCAN0_RX_ADMA_FLEXCAN0_RX 0x21 /* SODIMM 34 */ + >; + }; + + /* Colibri optional CAN on PS2 */ + pinctrl_flexcan2: flexcan1grp { + fsl,pins = < + IMX8QXP_FLEXCAN1_TX_ADMA_FLEXCAN1_TX 0x21 /* SODIMM 55 */ + IMX8QXP_FLEXCAN1_RX_ADMA_FLEXCAN1_RX 0x21 /* SODIMM 63 */ + >; + }; + + /* Colibri optional CAN on UART_A TXD/RXD */ + pinctrl_flexcan3: flexcan2grp { + fsl,pins = < + IMX8QXP_FLEXCAN2_TX_ADMA_FLEXCAN2_TX 0x21 /* SODIMM 35 */ + IMX8QXP_FLEXCAN2_RX_ADMA_FLEXCAN2_RX 0x21 /* SODIMM 33 */ + >; + }; + + /* Colibri LCD Back-Light GPIO */ + pinctrl_gpio_bl_on: gpioblongrp { + fsl,pins = < + IMX8QXP_QSPI0A_DATA3_LSIO_GPIO3_IO12 0x60 /* SODIMM 71 */ + >; + }; + + pinctrl_gpiokeys: gpiokeysgrp { + fsl,pins = < + IMX8QXP_QSPI0A_DATA1_LSIO_GPIO3_IO10 0x06700041 /* SODIMM 45 */ + >; + }; + + pinctrl_hog0: hog0grp { + fsl,pins = < + IMX8QXP_ENET0_RGMII_TXD3_LSIO_GPIO5_IO02 0x06000020 /* SODIMM 65 */ + IMX8QXP_CSI_D07_CI_PI_D09 0x61 /* SODIMM 65 */ + IMX8QXP_QSPI0A_DATA2_LSIO_GPIO3_IO11 0x20 /* SODIMM 69 */ + IMX8QXP_SAI0_TXC_LSIO_GPIO0_IO26 0x20 /* SODIMM 79 */ + IMX8QXP_CSI_D02_CI_PI_D04 0x61 /* SODIMM 79 */ + IMX8QXP_ENET0_RGMII_RXC_LSIO_GPIO5_IO03 0x06000020 /* SODIMM 85 */ + IMX8QXP_CSI_D06_CI_PI_D08 0x61 /* SODIMM 85 */ + IMX8QXP_QSPI0B_SCLK_LSIO_GPIO3_IO17 0x20 /* SODIMM 95 */ + IMX8QXP_SAI0_RXD_LSIO_GPIO0_IO27 0x20 /* SODIMM 97 */ + IMX8QXP_CSI_D03_CI_PI_D05 0x61 /* SODIMM 97 */ + IMX8QXP_QSPI0B_DATA0_LSIO_GPIO3_IO18 0x20 /* SODIMM 99 */ + IMX8QXP_SAI0_TXFS_LSIO_GPIO0_IO28 0x20 /* SODIMM 101 */ + IMX8QXP_CSI_D00_CI_PI_D02 0x61 /* SODIMM 101 */ + IMX8QXP_SAI0_TXD_LSIO_GPIO0_IO25 0x20 /* SODIMM 103 */ + IMX8QXP_CSI_D01_CI_PI_D03 0x61 /* SODIMM 103 */ + IMX8QXP_QSPI0B_DATA1_LSIO_GPIO3_IO19 0x20 /* SODIMM 105 */ + IMX8QXP_QSPI0B_DATA2_LSIO_GPIO3_IO20 0x20 /* SODIMM 107 */ + IMX8QXP_USB_SS3_TC2_LSIO_GPIO4_IO05 0x20 /* SODIMM 127 */ + IMX8QXP_USB_SS3_TC3_LSIO_GPIO4_IO06 0x20 /* SODIMM 131 */ + IMX8QXP_USB_SS3_TC1_LSIO_GPIO4_IO04 0x20 /* SODIMM 133 */ + IMX8QXP_CSI_PCLK_LSIO_GPIO3_IO00 0x20 /* SODIMM 96 */ + IMX8QXP_QSPI0B_DATA3_LSIO_GPIO3_IO21 0x20 /* SODIMM 98 */ + IMX8QXP_SAI1_RXFS_LSIO_GPIO0_IO31 0x20 /* SODIMM 100 */ + IMX8QXP_QSPI0B_DQS_LSIO_GPIO3_IO22 0x20 /* SODIMM 102 */ + IMX8QXP_QSPI0B_SS0_B_LSIO_GPIO3_IO23 0x20 /* SODIMM 104 */ + IMX8QXP_QSPI0B_SS1_B_LSIO_GPIO3_IO24 0x20 /* SODIMM 106 */ + >; + }; + + pinctrl_hog1: hog1grp { + fsl,pins = < + IMX8QXP_CSI_MCLK_LSIO_GPIO3_IO01 0x20 /* SODIMM 75 */ + IMX8QXP_QSPI0A_SCLK_LSIO_GPIO3_IO16 0x20 /* SODIMM 93 */ + >; + }; + + /* + * This pin is used in the SCFW as a UART. Using it from + * Linux would require rewritting the SCFW board file. + */ + pinctrl_hog_scfw: hogscfwgrp { + fsl,pins = < + IMX8QXP_SCU_GPIO0_00_LSIO_GPIO2_IO03 0x20 /* SODIMM 144 */ + >; + }; + + /* On Module I2C */ + pinctrl_i2c0: i2c0grp { + fsl,pins = < + IMX8QXP_MIPI_CSI0_GPIO0_00_ADMA_I2C0_SCL 0x06000021 + IMX8QXP_MIPI_CSI0_GPIO0_01_ADMA_I2C0_SDA 0x06000021 + >; + }; + + /* MIPI DSI I2C accessible on SODIMM (X1) and FFC (X2) */ + pinctrl_i2c0_mipi_lvds0: i2c0mipilvds0grp { + fsl,pins = < + IMX8QXP_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL 0xc6000020 /* SODIMM 140 */ + IMX8QXP_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA 0xc6000020 /* SODIMM 142 */ + >; + }; + + /* MIPI CSI I2C accessible on SODIMM (X1) and FFC (X3) */ + pinctrl_i2c0_mipi_lvds1: i2c0mipilvds1grp { + fsl,pins = < + IMX8QXP_MIPI_DSI1_I2C0_SCL_MIPI_DSI1_I2C0_SCL 0xc6000020 /* SODIMM 186 */ + IMX8QXP_MIPI_DSI1_I2C0_SDA_MIPI_DSI1_I2C0_SDA 0xc6000020 /* SODIMM 188 */ + >; + }; + + /* Colibri I2C */ + pinctrl_i2c1: i2c1grp { + fsl,pins = < + IMX8QXP_MIPI_DSI0_GPIO0_00_ADMA_I2C1_SCL 0x06000021 /* SODIMM 196 */ + IMX8QXP_MIPI_DSI0_GPIO0_01_ADMA_I2C1_SDA 0x06000021 /* SODIMM 194 */ + >; + }; + + /* Colibri Parallel RGB LCD Interface */ + pinctrl_lcdif: lcdifgrp { + fsl,pins = < + IMX8QXP_MCLK_OUT0_ADMA_LCDIF_CLK 0x60 /* SODIMM 56 */ + IMX8QXP_SPI3_CS0_ADMA_LCDIF_HSYNC 0x60 /* SODIMM 68 */ + IMX8QXP_MCLK_IN0_ADMA_LCDIF_VSYNC 0x60 /* SODIMM 82 */ + IMX8QXP_MCLK_IN1_ADMA_LCDIF_EN 0x60 /* SODIMM 44 */ + IMX8QXP_USDHC1_RESET_B_LSIO_GPIO4_IO19 0x60 /* SODIMM 44 */ + IMX8QXP_ESAI0_FSR_ADMA_LCDIF_D00 0x60 /* SODIMM 76 */ + IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21 0x60 /* SODIMM 76 */ + IMX8QXP_ESAI0_FST_ADMA_LCDIF_D01 0x60 /* SODIMM 70 */ + IMX8QXP_ESAI0_SCKR_ADMA_LCDIF_D02 0x60 /* SODIMM 60 */ + IMX8QXP_ESAI0_SCKT_ADMA_LCDIF_D03 0x60 /* SODIMM 58 */ + IMX8QXP_ESAI0_TX0_ADMA_LCDIF_D04 0x60 /* SODIMM 78 */ + IMX8QXP_ESAI0_TX1_ADMA_LCDIF_D05 0x60 /* SODIMM 72 */ + IMX8QXP_ESAI0_TX2_RX3_ADMA_LCDIF_D06 0x60 /* SODIMM 80 */ + IMX8QXP_ESAI0_TX3_RX2_ADMA_LCDIF_D07 0x60 /* SODIMM 46 */ + IMX8QXP_ESAI0_TX4_RX1_ADMA_LCDIF_D08 0x60 /* SODIMM 62 */ + IMX8QXP_ESAI0_TX5_RX0_ADMA_LCDIF_D09 0x60 /* SODIMM 48 */ + IMX8QXP_SPDIF0_RX_ADMA_LCDIF_D10 0x60 /* SODIMM 74 */ + IMX8QXP_SPDIF0_TX_ADMA_LCDIF_D11 0x60 /* SODIMM 50 */ + IMX8QXP_SPDIF0_EXT_CLK_ADMA_LCDIF_D12 0x60 /* SODIMM 52 */ + IMX8QXP_SPI3_SCK_ADMA_LCDIF_D13 0x60 /* SODIMM 54 */ + IMX8QXP_SPI3_SDO_ADMA_LCDIF_D14 0x60 /* SODIMM 66 */ + IMX8QXP_SPI3_SDI_ADMA_LCDIF_D15 0x60 /* SODIMM 64 */ + IMX8QXP_SPI3_CS1_ADMA_LCDIF_D16 0x60 /* SODIMM 57 */ + IMX8QXP_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01 0x60 /* SODIMM 57 */ + IMX8QXP_UART1_CTS_B_ADMA_LCDIF_D17 0x60 /* SODIMM 61 */ + >; + }; + + /* Colibri SPI */ + pinctrl_lpspi2: lpspi2grp { + fsl,pins = < + IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00 0x21 /* SODIMM 86 */ + IMX8QXP_SPI2_SDO_ADMA_SPI2_SDO 0x06000040 /* SODIMM 92 */ + IMX8QXP_SPI2_SDI_ADMA_SPI2_SDI 0x06000040 /* SODIMM 90 */ + IMX8QXP_SPI2_SCK_ADMA_SPI2_SCK 0x06000040 /* SODIMM 88 */ + >; + }; + + /* Colibri UART_B */ + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + IMX8QXP_UART0_RX_ADMA_UART0_RX 0x06000020 /* SODIMM 36 */ + IMX8QXP_UART0_TX_ADMA_UART0_TX 0x06000020 /* SODIMM 38 */ + IMX8QXP_FLEXCAN0_RX_ADMA_UART0_RTS_B 0x06000020 /* SODIMM 34 */ + IMX8QXP_FLEXCAN0_TX_ADMA_UART0_CTS_B 0x06000020 /* SODIMM 32 */ + >; + }; + + /* Colibri UART_C */ + pinctrl_lpuart2: lpuart2grp { + fsl,pins = < + IMX8QXP_UART2_RX_ADMA_UART2_RX 0x06000020 /* SODIMM 19 */ + IMX8QXP_UART2_TX_ADMA_UART2_TX 0x06000020 /* SODIMM 21 */ + >; + }; + + /* Colibri UART_A */ + pinctrl_lpuart3: lpuart3grp { + fsl,pins = < + IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX 0x06000020 /* SODIMM 33 */ + IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX 0x06000020 /* SODIMM 35 */ + >; + }; + + /* Colibri UART_A Control */ + pinctrl_lpuart3_ctrl: lpuart3ctrlgrp { + fsl,pins = < + IMX8QXP_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00 0x20 /* SODIMM 23 */ + IMX8QXP_SAI1_RXD_LSIO_GPIO0_IO29 0x20 /* SODIMM 25 */ + IMX8QXP_SAI1_RXC_LSIO_GPIO0_IO30 0x20 /* SODIMM 27 */ + IMX8QXP_CSI_RESET_LSIO_GPIO3_IO03 0x20 /* SODIMM 29 */ + IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22 0x20 /* SODIMM 31 */ + IMX8QXP_CSI_EN_LSIO_GPIO3_IO02 0x20 /* SODIMM 37 */ + >; + }; + + /* On module wifi module */ + pinctrl_pcieb: pciebgrp { + fsl,pins = < + IMX8QXP_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01 0x04000061 /* SODIMM 178 */ + IMX8QXP_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02 0x04000061 /* SODIMM 94 */ + IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00 0x60 /* SODIMM 81 */ + >; + }; + + /* Colibri PWM_A */ + pinctrl_pwm_a: pwmagrp { + /* both pins are connected together, reserve the unused CSI_D05 */ + fsl,pins = < + IMX8QXP_CSI_D05_CI_PI_D07 0x61 /* SODIMM 59 */ + IMX8QXP_SPI0_CS1_ADMA_LCD_PWM0_OUT 0x60 /* SODIMM 59 */ + >; + }; + + /* Colibri PWM_B */ + pinctrl_pwm_b: pwmbgrp { + fsl,pins = < + IMX8QXP_UART1_TX_LSIO_PWM0_OUT 0x60 /* SODIMM 28 */ + >; + }; + + /* Colibri PWM_C */ + pinctrl_pwm_c: pwmcgrp { + fsl,pins = < + IMX8QXP_UART1_RX_LSIO_PWM1_OUT 0x60 /* SODIMM 30 */ + >; + }; + + /* Colibri PWM_D */ + pinctrl_pwm_d: pwmdgrp { + /* both pins are connected together, reserve the unused CSI_D04 */ + fsl,pins = < + IMX8QXP_CSI_D04_CI_PI_D06 0x61 /* SODIMM 67 */ + IMX8QXP_UART1_RTS_B_LSIO_PWM2_OUT 0x60 /* SODIMM 67 */ + >; + }; + + /* On-module I2S */ + pinctrl_sai0: sai0grp { + fsl,pins = < + IMX8QXP_SPI0_SDI_ADMA_SAI0_TXD 0x06000040 + IMX8QXP_SPI0_CS0_ADMA_SAI0_RXD 0x06000040 + IMX8QXP_SPI0_SCK_ADMA_SAI0_TXC 0x06000040 + IMX8QXP_SPI0_SDO_ADMA_SAI0_TXFS 0x06000040 + >; + }; + + /* Colibri Audio Analogue Microphone GND */ + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + /* MIC GND EN */ + IMX8QXP_MIPI_CSI0_I2C0_SDA_LSIO_GPIO3_IO06 0x41 + >; + }; + + /* On-module SGTL5000 clock */ + pinctrl_sgtl5000_usb_clk: sgtl5000usbclkgrp { + fsl,pins = < + IMX8QXP_ADC_IN3_ADMA_ACM_MCLK_OUT0 0x21 + >; + }; + + /* On-module USB interrupt */ + pinctrl_usb3503a: usb3503agrp { + fsl,pins = < + IMX8QXP_MIPI_CSI0_MCLK_OUT_LSIO_GPIO3_IO04 0x61 + >; + }; + + /* Colibri USB Client Cable Detect */ + pinctrl_usbc_det: usbcdetgrp { + fsl,pins = < + IMX8QXP_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09 0x06000040 /* SODIMM 137 */ + >; + }; + + /* USB Host Power Enable */ + pinctrl_usbh1_reg: usbh1reggrp { + fsl,pins = < + IMX8QXP_USB_SS3_TC0_LSIO_GPIO4_IO03 0x06000040 /* SODIMM 129 */ + >; + }; + + /* On-module eMMC */ + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x21 + IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21 + IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21 + IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21 + IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21 + IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21 + IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21 + IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21 + IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21 + IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41 + IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x21 + IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21 + IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21 + IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21 + IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21 + IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21 + IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21 + IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21 + IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21 + IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41 + IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x21 + IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21 + IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21 + IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21 + IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21 + IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21 + IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21 + IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21 + IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21 + IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41 + IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21 + >; + }; + + /* Colibri SD/MMC Card Detect */ + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + IMX8QXP_QSPI0A_DATA0_LSIO_GPIO3_IO09 0x06000021 /* SODIMM 43 */ + >; + }; + + pinctrl_usdhc2_gpio_sleep: usdhc2gpioslpgrp { + fsl,pins = < + IMX8QXP_QSPI0A_DATA0_LSIO_GPIO3_IO09 0x60 /* SODIMM 43 */ + >; + }; + + /* Colibri SD/MMC Card */ + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 47 */ + IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 190 */ + IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21 /* SODIMM 192 */ + IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21 /* SODIMM 49 */ + IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21 /* SODIMM 51 */ + IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21 /* SODIMM 53 */ + IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 47 */ + IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 190 */ + IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21 /* SODIMM 192 */ + IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21 /* SODIMM 49 */ + IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21 /* SODIMM 51 */ + IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21 /* SODIMM 53 */ + IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 47 */ + IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 190 */ + IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21 /* SODIMM 192 */ + IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21 /* SODIMM 49 */ + IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21 /* SODIMM 51 */ + IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21 /* SODIMM 53 */ + IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 + >; + }; + + pinctrl_usdhc2_sleep: usdhc2slpgrp { + fsl,pins = < + IMX8QXP_USDHC1_CLK_LSIO_GPIO4_IO23 0x60 /* SODIMM 47 */ + IMX8QXP_USDHC1_CMD_LSIO_GPIO4_IO24 0x60 /* SODIMM 190 */ + IMX8QXP_USDHC1_DATA0_LSIO_GPIO4_IO25 0x60 /* SODIMM 192 */ + IMX8QXP_USDHC1_DATA1_LSIO_GPIO4_IO26 0x60 /* SODIMM 49 */ + IMX8QXP_USDHC1_DATA2_LSIO_GPIO4_IO27 0x60 /* SODIMM 51 */ + IMX8QXP_USDHC1_DATA3_LSIO_GPIO4_IO28 0x60 /* SODIMM 53 */ + IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 + >; + }; + + pinctrl_wifi: wifigrp { + fsl,pins = < + IMX8QXP_SCU_BOOT_MODE3_SCU_DSC_RTC_CLOCK_OUTPUT_32K 0x20 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts index 19468058e6ae..d3d26cca7d52 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts @@ -137,6 +137,8 @@ }; &usdhc1 { + assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>; + assigned-clock-rates = <200000000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; bus-width = <8>; @@ -147,6 +149,8 @@ }; &usdhc2 { + assigned-clocks = <&clk IMX_CONN_SDHC1_CLK>; + assigned-clock-rates = <200000000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <4>; @@ -234,3 +238,7 @@ &adma_dsp { status = "okay"; }; + +&scu_key { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index 1133b412182a..9646a41e0532 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/imx8-clock.h> #include <dt-bindings/firmware/imx/rsrc.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/pads-imx8qxp.h> @@ -174,6 +175,12 @@ #power-domain-cells = <1>; }; + scu_key: scu-key { + compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key"; + linux,keycodes = <KEY_POWER>; + status = "disabled"; + }; + rtc: rtc { compatible = "fsl,imx8qxp-sc-rtc"; }; @@ -361,8 +368,6 @@ <&conn_lpcg IMX_CONN_LPCG_SDHC0_PER_CLK>, <&conn_lpcg IMX_CONN_LPCG_SDHC0_HCLK>; clock-names = "ipg", "per", "ahb"; - assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>; - assigned-clock-rates = <200000000>; power-domains = <&pd IMX_SC_R_SDHC_0>; status = "disabled"; }; @@ -376,8 +381,6 @@ <&conn_lpcg IMX_CONN_LPCG_SDHC1_PER_CLK>, <&conn_lpcg IMX_CONN_LPCG_SDHC1_HCLK>; clock-names = "ipg", "per", "ahb"; - assigned-clocks = <&clk IMX_CONN_SDHC1_CLK>; - assigned-clock-rates = <200000000>; power-domains = <&pd IMX_SC_R_SDHC_1>; fsl,tuning-start-tap = <20>; fsl,tuning-step= <2>; @@ -393,8 +396,6 @@ <&conn_lpcg IMX_CONN_LPCG_SDHC2_PER_CLK>, <&conn_lpcg IMX_CONN_LPCG_SDHC2_HCLK>; clock-names = "ipg", "per", "ahb"; - assigned-clocks = <&clk IMX_CONN_SDHC2_CLK>; - assigned-clock-rates = <200000000>; power-domains = <&pd IMX_SC_R_SDHC_2>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/s32v234-evb.dts b/arch/arm64/boot/dts/freescale/s32v234-evb.dts new file mode 100644 index 000000000000..4b802518cefc --- /dev/null +++ b/arch/arm64/boot/dts/freescale/s32v234-evb.dts @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * Copyright 2016-2017 NXP + */ + +/dts-v1/; +#include "s32v234.dtsi" + +/ { + model = "NXP S32V234-EVB2 Board"; + compatible = "fsl,s32v234-evb", "fsl,s32v234"; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/s32v234.dtsi b/arch/arm64/boot/dts/freescale/s32v234.dtsi new file mode 100644 index 000000000000..e746b9c48f7a --- /dev/null +++ b/arch/arm64/boot/dts/freescale/s32v234.dtsi @@ -0,0 +1,139 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * Copyright 2016-2018 NXP + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/memreserve/ 0x80000000 0x00010000; + +/ { + compatible = "fsl,s32v234"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x80000000>; + next-level-cache = <&cluster0_l2_cache>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x80000000>; + next-level-cache = <&cluster0_l2_cache>; + }; + + cpu2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x100>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x80000000>; + next-level-cache = <&cluster1_l2_cache>; + }; + + cpu3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x101>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x80000000>; + next-level-cache = <&cluster1_l2_cache>; + }; + + cluster0_l2_cache: l2-cache0 { + compatible = "cache"; + }; + + cluster1_l2_cache: l2-cache1 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>; + /* clock-frequency might be modified by u-boot, depending on the + * chip version. + */ + clock-frequency = <10000000>; + }; + + gic: interrupt-controller@7d001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x7d001000 0 0x1000>, + <0 0x7d002000 0 0x2000>, + <0 0x7d004000 0 0x2000>, + <0 0x7d006000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + aips0: aips-bus@40000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + reg = <0x0 0x40000000 0x0 0x7d000>; + ranges; + + uart0: serial@40053000 { + compatible = "fsl,s32v234-linflexuart"; + reg = <0x0 0x40053000 0x0 0x1000>; + interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + }; + + aips1: aips-bus@40080000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + reg = <0x0 0x40080000 0x0 0x70000>; + ranges; + + uart1: serial@400bc000 { + compatible = "fsl,s32v234-linflexuart"; + reg = <0x0 0x400bc000 0x0 0x1000>; + interrupts = <GIC_SPI 60 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 108e2a4227f6..2072b637b5af 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -260,6 +260,7 @@ compatible = "hisilicon,hi6220-aoctrl", "syscon"; reg = <0x0 0xf7800000 0x0 0x2000>; #clock-cells = <1>; + #reset-cells = <1>; }; sys_ctrl: sys_ctrl@f7030000 { @@ -1021,6 +1022,43 @@ clock-names = "apb_pclk"; cpu = <&cpu7>; }; + + mali: gpu@f4080000 { + compatible = "hisilicon,hi6220-mali", "arm,mali-450"; + reg = <0x0 0xf4080000 0x0 0x00040000>; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-names = "gp", + "gpmmu", + "pp", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pp2", + "ppmmu2", + "pp3", + "ppmmu3"; + clocks = <&media_ctrl HI6220_G3D_CLK>, + <&media_ctrl HI6220_G3D_PCLK>; + clock-names = "core", "bus"; + assigned-clocks = <&media_ctrl HI6220_G3D_CLK>, + <&media_ctrl HI6220_G3D_PCLK>; + assigned-clock-rates = <500000000>, <144000000>; + reset-names = "ao_g3d", "media_g3d"; + resets = <&ao_ctrl AO_G3D>, <&media_ctrl MEDIA_G3D>; + }; }; }; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi index 36abc25320a8..94090c6fb946 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi +++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi @@ -12,6 +12,19 @@ #address-cells = <2>; #size-cells = <2>; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + service_reserved: svcbuffer@0 { + compatible = "shared-dma-pool"; + reg = <0x0 0x0 0x0 0x1000000>; + alignment = <0x1000>; + no-map; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -81,6 +94,13 @@ interrupt-parent = <&intc>; ranges = <0 0 0 0xffffffff>; + base_fpga_region { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "fpga-region"; + fpga-mgr = <&fpga_mgr>; + }; + gmac0: ethernet@ff800000 { compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; reg = <0xff800000 0x2000>; @@ -442,5 +462,17 @@ status = "disabled"; }; + + firmware { + svc { + compatible = "intel,stratix10-svc"; + method = "smc"; + memory-region = <&service_reserved>; + + fpga_mgr: fpga-mgr { + compatible = "intel,stratix10-soc-fpga-mgr"; + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts index 7814a9e8eb08..e794a12ba7c5 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts +++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts @@ -18,6 +18,24 @@ stdout-path = "serial0:115200n8"; }; + leds { + compatible = "gpio-leds"; + hps0 { + label = "hps_led0"; + gpios = <&portb 20 GPIO_ACTIVE_HIGH>; + }; + + hps1 { + label = "hps_led1"; + gpios = <&portb 19 GPIO_ACTIVE_HIGH>; + }; + + hps2 { + label = "hps_led2"; + gpios = <&portb 21 GPIO_ACTIVE_HIGH>; + }; + }; + memory { device_type = "memory"; /* We expect the bootloader to fill in the reg */ @@ -70,6 +88,46 @@ status = "okay"; }; +&usb0 { + status = "okay"; + disable-over-current; +}; + &watchdog0 { status = "okay"; }; + +&qspi { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mt25qu02g"; + reg = <0>; + spi-max-frequency = <100000000>; + + m25p,fast-read; + cdns,page-size = <256>; + cdns,block-size = <16>; + cdns,read-delay = <1>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + qspi_boot: partition@0 { + label = "Boot and fpga data"; + reg = <0x0 0x034B0000>; + }; + + qspi_rootfs: partition@34B0000 { + label = "Root Filesystem - JFFS2"; + reg = <0x034B0000 0x0EB50000>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi index c8dc9c20fba3..64f3b135068d 100644 --- a/arch/arm64/boot/dts/lg/lg1312.dtsi +++ b/arch/arm64/boot/dts/lg/lg1312.dtsi @@ -124,7 +124,7 @@ amba { #address-cells = <2>; #size-cells = <1>; - #interrupts-cells = <3>; + #interrupt-cells = <3>; compatible = "simple-bus"; interrupt-parent = <&gic>; diff --git a/arch/arm64/boot/dts/lg/lg1313.dtsi b/arch/arm64/boot/dts/lg/lg1313.dtsi index 82c6645b58b7..ac23592ab011 100644 --- a/arch/arm64/boot/dts/lg/lg1313.dtsi +++ b/arch/arm64/boot/dts/lg/lg1313.dtsi @@ -124,7 +124,7 @@ amba { #address-cells = <2>; #size-cells = <1>; - #interrupts-cells = <3>; + #interrupt-cells = <3>; compatible = "simple-bus"; interrupt-parent = <&gic>; diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index 243338c914a4..f1b5127f0b89 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -10,3 +10,6 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin-singleshot.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8080-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += cn9130-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += cn9131-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db.dtb diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts new file mode 100644 index 000000000000..bd9ed9dc9c3e --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board with eMMC + * Copyright (C) 2018 Marvell + * + * Romain Perier <romain.perier@free-electrons.com> + * Konstantin Porotchkin <kostap@marvell.com> + * + */ +/* + * Schematic available at http://espressobin.net/wp-content/uploads/2017/08/ESPRESSObin_V5_Schematics.pdf + */ + +#include "armada-3720-espressobin.dtsi" + +/ { + model = "Globalscale Marvell ESPRESSOBin Board (eMMC)"; + compatible = "globalscale,espressobin-emmc", "globalscale,espressobin", + "marvell,armada3720", "marvell,armada3710"; +}; + +/* U11 */ +&sdhci0 { + non-removable; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,xenon-emmc; + marvell,xenon-tun-count = <9>; + marvell,pad-type = "fixed-1-8v"; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc_pins>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + mmccard: mmccard@0 { + compatible = "mmc-card"; + reg = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts new file mode 100644 index 000000000000..6e876a6d9532 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7 with eMMC + * Copyright (C) 2018 Marvell + * + * Romain Perier <romain.perier@free-electrons.com> + * Konstantin Porotchkin <kostap@marvell.com> + * + */ +/* + * Schematic available at http://wiki.espressobin.net/tiki-download_file.php?fileId=200 + */ + +#include "armada-3720-espressobin.dtsi" + +/ { + model = "Globalscale Marvell ESPRESSOBin Board V7 (eMMC)"; + compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7", + "globalscale,espressobin", "marvell,armada3720", + "marvell,armada3710"; +}; + +&switch0 { + ports { + port@1 { + reg = <1>; + label = "lan1"; + phy-handle = <&switch0phy0>; + }; + + port@3 { + reg = <3>; + label = "wan"; + phy-handle = <&switch0phy2>; + }; + }; +}; + +/* U11 */ +&sdhci0 { + non-removable; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,xenon-emmc; + marvell,xenon-tun-count = <9>; + marvell,pad-type = "fixed-1-8v"; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc_pins>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + mmccard: mmccard@0 { + compatible = "mmc-card"; + reg = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts new file mode 100644 index 000000000000..0f8405d085fd --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7 + * Copyright (C) 2018 Marvell + * + * Romain Perier <romain.perier@free-electrons.com> + * Konstantin Porotchkin <kostap@marvell.com> + * + */ +/* + * Schematic available at http://wiki.espressobin.net/tiki-download_file.php?fileId=200 + */ + +#include "armada-3720-espressobin.dtsi" + +/ { + model = "Globalscale Marvell ESPRESSOBin Board V7"; + compatible = "globalscale,espressobin-v7", "globalscale,espressobin", + "marvell,armada3720", "marvell,armada3710"; +}; + +&switch0 { + ports { + port@1 { + reg = <1>; + label = "lan1"; + phy-handle = <&switch0phy0>; + }; + + port@3 { + reg = <3>; + label = "wan"; + phy-handle = <&switch0phy2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts index fbcf03f86c96..1542d836c090 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts @@ -12,191 +12,9 @@ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include "armada-372x.dtsi" +#include "armada-3720-espressobin.dtsi" / { model = "Globalscale Marvell ESPRESSOBin Board"; compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x00000000 0x00000000 0x20000000>; - }; - - vcc_sd_reg1: regulator { - compatible = "regulator-gpio"; - regulator-name = "vcc_sd1"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - - gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>; - gpios-states = <0>; - states = <1800000 0x1 - 3300000 0x0>; - enable-active-high; - }; -}; - -/* J9 */ -&pcie0 { - status = "okay"; - phys = <&comphy1 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; -}; - -/* J6 */ -&sata { - status = "okay"; - phys = <&comphy2 0>; - phy-names = "sata-phy"; -}; - -/* J1 */ -&sdhci1 { - wp-inverted; - bus-width = <4>; - cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>; - marvell,pad-type = "sd"; - vqmmc-supply = <&vcc_sd_reg1>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdio_pins>; - status = "okay"; -}; - -/* U11 */ -&sdhci0 { - non-removable; - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs400-1_8v; - marvell,xenon-emmc; - marvell,xenon-tun-count = <9>; - marvell,pad-type = "fixed-1-8v"; - - pinctrl-names = "default"; - pinctrl-0 = <&mmc_pins>; -/* - * This eMMC is not populated on all boards, so disable it by - * default and let the bootloader enable it, if it is present - */ - status = "disabled"; -}; - -&spi0 { - status = "okay"; - - flash@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <104000000>; - m25p,fast-read; - }; -}; - -/* Exported on the micro USB connector J5 through an FTDI */ -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; - status = "okay"; -}; - -/* - * Connector J17 and J18 expose a number of different features. Some pins are - * multiplexed. This is the case for instance for the following features: - * - UART1 (pin 24 = RX, pin 26 = TX). See armada-3720-db.dts for an example of - * how to enable it. Beware that the signals are 1.8V TTL. - * - I2C - * - SPI - * - MMC - */ - -/* J7 */ -&usb3 { - status = "okay"; -}; - -/* J8 */ -&usb2 { - status = "okay"; -}; - -&mdio { - switch0: switch0@1 { - compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - dsa,member = <0 0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <ð0>; - phy-mode = "rgmii-id"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "wan"; - phy-handle = <&switch0phy0>; - }; - - port@2 { - reg = <2>; - label = "lan0"; - phy-handle = <&switch0phy1>; - }; - - port@3 { - reg = <3>; - label = "lan1"; - phy-handle = <&switch0phy2>; - }; - - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - switch0phy0: switch0phy0@11 { - reg = <0x11>; - }; - switch0phy1: switch0phy1@12 { - reg = <0x12>; - }; - switch0phy2: switch0phy2@13 { - reg = <0x13>; - }; - }; - }; -}; - -ð0 { - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>, <&smi_pins>; - phy-mode = "rgmii-id"; - status = "okay"; - - fixed-link { - speed = <1000>; - full-duplex; - }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi new file mode 100644 index 000000000000..53b8ac55a7f3 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board + * Copyright (C) 2016 Marvell + * + * Romain Perier <romain.perier@free-electrons.com> + * + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "armada-372x.dtsi" + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + vcc_sd_reg1: regulator { + compatible = "regulator-gpio"; + regulator-name = "vcc_sd1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + states = <1800000 0x1 + 3300000 0x0>; + enable-active-high; + }; +}; + +/* J9 */ +&pcie0 { + status = "okay"; + phys = <&comphy1 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; +}; + +/* J6 */ +&sata { + status = "okay"; + phys = <&comphy2 0>; + phy-names = "sata-phy"; +}; + +/* J1 */ +&sdhci1 { + wp-inverted; + bus-width = <4>; + cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>; + marvell,pad-type = "sd"; + vqmmc-supply = <&vcc_sd_reg1>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pins>; + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + reg = <0>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <104000000>; + m25p,fast-read; + }; +}; + +/* Exported on the micro USB connector J5 through an FTDI */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +}; + +/* + * Connector J17 and J18 expose a number of different features. Some pins are + * multiplexed. This is the case for instance for the following features: + * - UART1 (pin 24 = RX, pin 26 = TX). See armada-3720-db.dts for an example of + * how to enable it. Beware that the signals are 1.8V TTL. + * - I2C + * - SPI + * - MMC + */ + +/* J7 */ +&usb3 { + status = "okay"; +}; + +/* J8 */ +&usb2 { + status = "okay"; +}; + +&mdio { + switch0: switch0@1 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + dsa,member = <0 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <ð0>; + phy-mode = "rgmii-id"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "wan"; + phy-handle = <&switch0phy0>; + }; + + port@2 { + reg = <2>; + label = "lan0"; + phy-handle = <&switch0phy1>; + }; + + port@3 { + reg = <3>; + label = "lan1"; + phy-handle = <&switch0phy2>; + }; + + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy0: switch0phy0@11 { + reg = <0x11>; + }; + switch0phy1: switch0phy1@12 { + reg = <0x12>; + }; + switch0phy2: switch0phy2@13 { + reg = <0x13>; + }; + }; + }; +}; + +ð0 { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>, <&smi_pins>; + phy-mode = "rgmii-id"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts index 5f350cc71a2f..bb42d1e6a4e9 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts @@ -106,6 +106,14 @@ /* enabled by U-Boot if SFP module is present */ status = "disabled"; }; + + firmware { + turris-mox-rwtm { + compatible = "cznic,turris-mox-rwtm"; + mboxes = <&rwtm 0>; + status = "okay"; + }; + }; }; &i2c0 { diff --git a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi index e5c6d7c25819..293403a1a333 100644 --- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi @@ -17,23 +17,23 @@ /* * Instantiate the CP110 */ -#define CP110_NAME cp0 -#define CP110_BASE f2000000 -#define CP110_PCIE_IO_BASE 0xf9000000 -#define CP110_PCIE_MEM_BASE 0xf6000000 -#define CP110_PCIE0_BASE f2600000 -#define CP110_PCIE1_BASE f2620000 -#define CP110_PCIE2_BASE f2640000 +#define CP11X_NAME cp0 +#define CP11X_BASE f2000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xf6000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f2600000 +#define CP11X_PCIE1_BASE f2620000 +#define CP11X_PCIE2_BASE f2640000 #include "armada-cp110.dtsi" -#undef CP110_NAME -#undef CP110_BASE -#undef CP110_PCIE_IO_BASE -#undef CP110_PCIE_MEM_BASE -#undef CP110_PCIE0_BASE -#undef CP110_PCIE1_BASE -#undef CP110_PCIE2_BASE +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE &cp0_gpio1 { status = "okay"; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi index d250f4b2bfed..572e2610e0a3 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi @@ -179,8 +179,7 @@ num-lanes = <4>; num-viewport = <8>; reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>; - ranges = <0x81000000 0x0 0xf9010000 0x0 0xf9010000 0x0 0x10000 - 0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>; + ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>; phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>, <&cp0_comphy2 0>, <&cp0_comphy3 0>; phy-names = "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy", diff --git a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi index 8129b40f12a4..ee67c70bf02e 100644 --- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi @@ -19,44 +19,44 @@ /* * Instantiate the master CP110 */ -#define CP110_NAME cp0 -#define CP110_BASE f2000000 -#define CP110_PCIE_IO_BASE 0xf9000000 -#define CP110_PCIE_MEM_BASE 0xf6000000 -#define CP110_PCIE0_BASE f2600000 -#define CP110_PCIE1_BASE f2620000 -#define CP110_PCIE2_BASE f2640000 +#define CP11X_NAME cp0 +#define CP11X_BASE f2000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xf6000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f2600000 +#define CP11X_PCIE1_BASE f2620000 +#define CP11X_PCIE2_BASE f2640000 #include "armada-cp110.dtsi" -#undef CP110_NAME -#undef CP110_BASE -#undef CP110_PCIE_IO_BASE -#undef CP110_PCIE_MEM_BASE -#undef CP110_PCIE0_BASE -#undef CP110_PCIE1_BASE -#undef CP110_PCIE2_BASE +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE /* * Instantiate the slave CP110 */ -#define CP110_NAME cp1 -#define CP110_BASE f4000000 -#define CP110_PCIE_IO_BASE 0xfd000000 -#define CP110_PCIE_MEM_BASE 0xfa000000 -#define CP110_PCIE0_BASE f4600000 -#define CP110_PCIE1_BASE f4620000 -#define CP110_PCIE2_BASE f4640000 +#define CP11X_NAME cp1 +#define CP11X_BASE f4000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xfa000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f4600000 +#define CP11X_PCIE1_BASE f4620000 +#define CP11X_PCIE2_BASE f4640000 #include "armada-cp110.dtsi" -#undef CP110_NAME -#undef CP110_BASE -#undef CP110_PCIE_IO_BASE -#undef CP110_PCIE_MEM_BASE -#undef CP110_PCIE0_BASE -#undef CP110_PCIE1_BASE -#undef CP110_PCIE2_BASE +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE /* The 80x0 has two CP blocks, but uses only one block from each. */ &cp1_gpio1 { diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi index 9024a2d9db07..09849558a776 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi @@ -21,6 +21,14 @@ reg = <0x000>; enable-method = "psci"; #cooling-cells = <2>; + clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2>; }; cpu1: cpu@1 { device_type = "cpu"; @@ -28,6 +36,21 @@ reg = <0x001>; enable-method = "psci"; #cooling-cells = <2>; + clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2>; + }; + + l2: l2-cache { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; }; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi index c25bc65727b5..3db427122f9e 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi @@ -22,6 +22,13 @@ enable-method = "psci"; #cooling-cells = <2>; clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_0>; }; cpu1: cpu@1 { device_type = "cpu"; @@ -30,6 +37,13 @@ enable-method = "psci"; #cooling-cells = <2>; clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_0>; }; cpu2: cpu@100 { device_type = "cpu"; @@ -38,6 +52,13 @@ enable-method = "psci"; #cooling-cells = <2>; clocks = <&cpu_clk 1>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; }; cpu3: cpu@101 { device_type = "cpu"; @@ -46,6 +67,27 @@ enable-method = "psci"; #cooling-cells = <2>; clocks = <&cpu_clk 1>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; + }; + + l2_0: l2-cache0 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + }; + + l2_1: l2-cache1 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; }; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index d06dd198f2c7..866628679ac7 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -5,454 +5,26 @@ * Device Tree file for Marvell Armada AP806. */ -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/thermal/thermal.h> - -/dts-v1/; +#define AP_NAME ap806 +#include "armada-ap80x.dtsi" / { model = "Marvell Armada AP806"; compatible = "marvell,armada-ap806"; - #address-cells = <2>; - #size-cells = <2>; - - aliases { - serial0 = &uart0; - serial1 = &uart1; - gpio0 = &ap_gpio; - spi0 = &spi0; - }; - - psci { - compatible = "arm,psci-0.2"; - method = "smc"; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - /* - * This area matches the mapping done with a - * mainline U-Boot, and should be updated by the - * bootloader. - */ - - psci-area@4000000 { - reg = <0x0 0x4000000 0x0 0x200000>; - no-map; - }; - }; - - ap806 { - #address-cells = <2>; - #size-cells = <2>; - compatible = "simple-bus"; - interrupt-parent = <&gic>; - ranges; - - config-space@f0000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0x0 0x0 0xf0000000 0x1000000>; - - gic: interrupt-controller@210000 { - compatible = "arm,gic-400"; - #interrupt-cells = <3>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - interrupt-controller; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - reg = <0x210000 0x10000>, - <0x220000 0x20000>, - <0x240000 0x20000>, - <0x260000 0x20000>; - - gic_v2m0: v2m@280000 { - compatible = "arm,gic-v2m-frame"; - msi-controller; - reg = <0x280000 0x1000>; - arm,msi-base-spi = <160>; - arm,msi-num-spis = <32>; - }; - gic_v2m1: v2m@290000 { - compatible = "arm,gic-v2m-frame"; - msi-controller; - reg = <0x290000 0x1000>; - arm,msi-base-spi = <192>; - arm,msi-num-spis = <32>; - }; - gic_v2m2: v2m@2a0000 { - compatible = "arm,gic-v2m-frame"; - msi-controller; - reg = <0x2a0000 0x1000>; - arm,msi-base-spi = <224>; - arm,msi-num-spis = <32>; - }; - gic_v2m3: v2m@2b0000 { - compatible = "arm,gic-v2m-frame"; - msi-controller; - reg = <0x2b0000 0x1000>; - arm,msi-base-spi = <256>; - arm,msi-num-spis = <32>; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - }; - - pmu { - compatible = "arm,cortex-a72-pmu"; - interrupt-parent = <&pic>; - interrupts = <17>; - }; - - odmi: odmi@300000 { - compatible = "marvell,odmi-controller"; - interrupt-controller; - msi-controller; - marvell,odmi-frames = <4>; - reg = <0x300000 0x4000>, - <0x304000 0x4000>, - <0x308000 0x4000>, - <0x30C000 0x4000>; - marvell,spi-base = <128>, <136>, <144>, <152>; - }; - - gicp: gicp@3f0040 { - compatible = "marvell,ap806-gicp"; - reg = <0x3f0040 0x10>; - marvell,spi-ranges = <64 64>, <288 64>; - msi-controller; - }; - - pic: interrupt-controller@3f0100 { - compatible = "marvell,armada-8k-pic"; - reg = <0x3f0100 0x10>; - #interrupt-cells = <1>; - interrupt-controller; - interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; - }; - - sei: interrupt-controller@3f0200 { - compatible = "marvell,ap806-sei"; - reg = <0x3f0200 0x40>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <1>; - interrupt-controller; - msi-controller; - }; - - xor@400000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x400000 0x1000>, - <0x410000 0x1000>; - msi-parent = <&gic_v2m0>; - clocks = <&ap_clk 3>; - dma-coherent; - }; - - xor@420000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x420000 0x1000>, - <0x430000 0x1000>; - msi-parent = <&gic_v2m0>; - clocks = <&ap_clk 3>; - dma-coherent; - }; - - xor@440000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x440000 0x1000>, - <0x450000 0x1000>; - msi-parent = <&gic_v2m0>; - clocks = <&ap_clk 3>; - dma-coherent; - }; - - xor@460000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x460000 0x1000>, - <0x470000 0x1000>; - msi-parent = <&gic_v2m0>; - clocks = <&ap_clk 3>; - dma-coherent; - }; - - spi0: spi@510600 { - compatible = "marvell,armada-380-spi"; - reg = <0x510600 0x50>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ap_clk 3>; - status = "disabled"; - }; - - i2c0: i2c@511000 { - compatible = "marvell,mv78230-i2c"; - reg = <0x511000 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; - timeout-ms = <1000>; - clocks = <&ap_clk 3>; - status = "disabled"; - }; - - uart0: serial@512000 { - compatible = "snps,dw-apb-uart"; - reg = <0x512000 0x100>; - reg-shift = <2>; - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; - reg-io-width = <1>; - clocks = <&ap_clk 3>; - status = "disabled"; - }; - - uart1: serial@512100 { - compatible = "snps,dw-apb-uart"; - reg = <0x512100 0x100>; - reg-shift = <2>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; - reg-io-width = <1>; - clocks = <&ap_clk 3>; - status = "disabled"; - - }; - - watchdog: watchdog@610000 { - compatible = "arm,sbsa-gwdt"; - reg = <0x610000 0x1000>, <0x600000 0x1000>; - interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; - }; - - ap_sdhci0: sdhci@6e0000 { - compatible = "marvell,armada-ap806-sdhci"; - reg = <0x6e0000 0x300>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core"; - clocks = <&ap_clk 4>; - dma-coherent; - marvell,xenon-phy-slow-mode; - status = "disabled"; - }; - - ap_syscon: system-controller@6f4000 { - compatible = "syscon", "simple-mfd"; - reg = <0x6f4000 0x2000>; - - ap_clk: clock { - compatible = "marvell,ap806-clock"; - #clock-cells = <1>; - }; - - ap_pinctrl: pinctrl { - compatible = "marvell,ap806-pinctrl"; - - uart0_pins: uart0-pins { - marvell,pins = "mpp11", "mpp19"; - marvell,function = "uart0"; - }; - }; - - ap_gpio: gpio@1040 { - compatible = "marvell,armada-8k-gpio"; - offset = <0x1040>; - ngpios = <20>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&ap_pinctrl 0 0 20>; - }; - }; - - ap_syscon1: system-controller@6f8000 { - compatible = "syscon", "simple-mfd"; - reg = <0x6f8000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - - cpu_clk: clock-cpu@278 { - compatible = "marvell,ap806-cpu-clock"; - clocks = <&ap_clk 0>, <&ap_clk 1>; - #clock-cells = <1>; - reg = <0x278 0xa30>; - }; +}; - ap_thermal: thermal-sensor@80 { - compatible = "marvell,armada-ap806-thermal"; - reg = <0x80 0x10>; - interrupt-parent = <&sei>; - interrupts = <18>; - #thermal-sensor-cells = <1>; - }; - }; - }; +&ap_syscon0 { + ap_clk: clock { + compatible = "marvell,ap806-clock"; + #clock-cells = <1>; }; +}; - /* - * The thermal IP features one internal sensor plus, if applicable, one - * remote channel wired to one sensor per CPU. - * - * Only one thermal zone per AP/CP may trigger interrupts at a time, the - * first one that will have a critical trip point will be chosen. - */ - thermal-zones { - ap_thermal_ic: ap-thermal-ic { - polling-delay-passive = <0>; /* Interrupt driven */ - polling-delay = <0>; /* Interrupt driven */ - - thermal-sensors = <&ap_thermal 0>; - - trips { - ap_crit: ap-crit { - temperature = <100000>; /* mC degrees */ - hysteresis = <2000>; /* mC degrees */ - type = "critical"; - }; - }; - - cooling-maps { }; - }; - - ap_thermal_cpu0: ap-thermal-cpu0 { - polling-delay-passive = <1000>; - polling-delay = <1000>; - - thermal-sensors = <&ap_thermal 1>; - - trips { - cpu0_hot: cpu0-hot { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu0_emerg: cpu0-emerg { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - }; - - cooling-maps { - map0_hot: map0-hot { - trip = <&cpu0_hot>; - cooling-device = <&cpu0 1 2>, - <&cpu1 1 2>; - }; - map0_emerg: map0-ermerg { - trip = <&cpu0_emerg>; - cooling-device = <&cpu0 3 3>, - <&cpu1 3 3>; - }; - }; - }; - - ap_thermal_cpu1: ap-thermal-cpu1 { - polling-delay-passive = <1000>; - polling-delay = <1000>; - - thermal-sensors = <&ap_thermal 2>; - - trips { - cpu1_hot: cpu1-hot { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu1_emerg: cpu1-emerg { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - }; - - cooling-maps { - map1_hot: map1-hot { - trip = <&cpu1_hot>; - cooling-device = <&cpu0 1 2>, - <&cpu1 1 2>; - }; - map1_emerg: map1-emerg { - trip = <&cpu1_emerg>; - cooling-device = <&cpu0 3 3>, - <&cpu1 3 3>; - }; - }; - }; - - ap_thermal_cpu2: ap-thermal-cpu2 { - polling-delay-passive = <1000>; - polling-delay = <1000>; - - thermal-sensors = <&ap_thermal 3>; - - trips { - cpu2_hot: cpu2-hot { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu2_emerg: cpu2-emerg { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - }; - - cooling-maps { - map2_hot: map2-hot { - trip = <&cpu2_hot>; - cooling-device = <&cpu2 1 2>, - <&cpu3 1 2>; - }; - map2_emerg: map2-emerg { - trip = <&cpu2_emerg>; - cooling-device = <&cpu2 3 3>, - <&cpu3 3 3>; - }; - }; - }; - - ap_thermal_cpu3: ap-thermal-cpu3 { - polling-delay-passive = <1000>; - polling-delay = <1000>; - - thermal-sensors = <&ap_thermal 4>; - - trips { - cpu3_hot: cpu3-hot { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu3_emerg: cpu3-emerg { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - }; - - cooling-maps { - map3_hot: map3-bhot { - trip = <&cpu3_hot>; - cooling-device = <&cpu2 1 2>, - <&cpu3 1 2>; - }; - map3_emerg: map3-emerg { - trip = <&cpu3_emerg>; - cooling-device = <&cpu2 3 3>, - <&cpu3 3 3>; - }; - }; - }; +&ap_syscon1 { + cpu_clk: clock-cpu@278 { + compatible = "marvell,ap806-cpu-clock"; + clocks = <&ap_clk 0>, <&ap_clk 1>; + #clock-cells = <1>; + reg = <0x278 0xa30>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi new file mode 100644 index 000000000000..840466e143b4 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Marvell Armada AP807 Quad + * + * Copyright (C) 2019 Marvell Technology Group Ltd. + */ + +#include "armada-ap807.dtsi" + +/ { + model = "Marvell Armada AP807 Quad"; + compatible = "marvell,armada-ap807-quad", "marvell,armada-ap807"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x000>; + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_0>; + }; + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x001>; + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_0>; + }; + cpu2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x100>; + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 1>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; + }; + cpu3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x101>; + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 1>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; + }; + + l2_0: l2-cache0 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + }; + + l2_1: l2-cache1 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-ap807.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi new file mode 100644 index 000000000000..623010f3ca89 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Marvell Armada AP807 + * + * Copyright (C) 2019 Marvell Technology Group Ltd. + */ + +#define AP_NAME ap807 +#include "armada-ap80x.dtsi" + +/ { + model = "Marvell Armada AP807"; + compatible = "marvell,armada-ap807"; +}; + +&ap_syscon0 { + ap_clk: clock { + compatible = "marvell,ap807-clock"; + #clock-cells = <1>; + }; +}; + +&ap_syscon1 { + cpu_clk: clock-cpu { + compatible = "marvell,ap807-cpu-clock"; + clocks = <&ap_clk 0>, <&ap_clk 1>; + #clock-cells = <1>; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi new file mode 100644 index 000000000000..e7438c21ccee --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi @@ -0,0 +1,444 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell Technology Group Ltd. + * + * Device Tree file for Marvell Armada AP80x. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + gpio0 = &ap_gpio; + spi0 = &spi0; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * This area matches the mapping done with a + * mainline U-Boot, and should be updated by the + * bootloader. + */ + + psci-area@4000000 { + reg = <0x0 0x4000000 0x0 0x200000>; + no-map; + }; + }; + + AP_NAME { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + config-space@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x0 0x0 0xf0000000 0x1000000>; + + gic: interrupt-controller@210000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + reg = <0x210000 0x10000>, + <0x220000 0x20000>, + <0x240000 0x20000>, + <0x260000 0x20000>; + + gic_v2m0: v2m@280000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x280000 0x1000>; + arm,msi-base-spi = <160>; + arm,msi-num-spis = <32>; + }; + gic_v2m1: v2m@290000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x290000 0x1000>; + arm,msi-base-spi = <192>; + arm,msi-num-spis = <32>; + }; + gic_v2m2: v2m@2a0000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x2a0000 0x1000>; + arm,msi-base-spi = <224>; + arm,msi-num-spis = <32>; + }; + gic_v2m3: v2m@2b0000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x2b0000 0x1000>; + arm,msi-base-spi = <256>; + arm,msi-num-spis = <32>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu { + compatible = "arm,cortex-a72-pmu"; + interrupt-parent = <&pic>; + interrupts = <17>; + }; + + odmi: odmi@300000 { + compatible = "marvell,odmi-controller"; + interrupt-controller; + msi-controller; + marvell,odmi-frames = <4>; + reg = <0x300000 0x4000>, + <0x304000 0x4000>, + <0x308000 0x4000>, + <0x30C000 0x4000>; + marvell,spi-base = <128>, <136>, <144>, <152>; + }; + + gicp: gicp@3f0040 { + compatible = "marvell,ap806-gicp"; + reg = <0x3f0040 0x10>; + marvell,spi-ranges = <64 64>, <288 64>; + msi-controller; + }; + + pic: interrupt-controller@3f0100 { + compatible = "marvell,armada-8k-pic"; + reg = <0x3f0100 0x10>; + #interrupt-cells = <1>; + interrupt-controller; + interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; + }; + + sei: interrupt-controller@3f0200 { + compatible = "marvell,ap806-sei"; + reg = <0x3f0200 0x40>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-controller; + msi-controller; + }; + + xor@400000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x400000 0x1000>, + <0x410000 0x1000>; + msi-parent = <&gic_v2m0>; + clocks = <&ap_clk 3>; + dma-coherent; + }; + + xor@420000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x420000 0x1000>, + <0x430000 0x1000>; + msi-parent = <&gic_v2m0>; + clocks = <&ap_clk 3>; + dma-coherent; + }; + + xor@440000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x440000 0x1000>, + <0x450000 0x1000>; + msi-parent = <&gic_v2m0>; + clocks = <&ap_clk 3>; + dma-coherent; + }; + + xor@460000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x460000 0x1000>, + <0x470000 0x1000>; + msi-parent = <&gic_v2m0>; + clocks = <&ap_clk 3>; + dma-coherent; + }; + + spi0: spi@510600 { + compatible = "marvell,armada-380-spi"; + reg = <0x510600 0x50>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ap_clk 3>; + status = "disabled"; + }; + + i2c0: i2c@511000 { + compatible = "marvell,mv78230-i2c"; + reg = <0x511000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + timeout-ms = <1000>; + clocks = <&ap_clk 3>; + status = "disabled"; + }; + + uart0: serial@512000 { + compatible = "snps,dw-apb-uart"; + reg = <0x512000 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clocks = <&ap_clk 3>; + status = "disabled"; + }; + + uart1: serial@512100 { + compatible = "snps,dw-apb-uart"; + reg = <0x512100 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clocks = <&ap_clk 3>; + status = "disabled"; + + }; + + watchdog: watchdog@610000 { + compatible = "arm,sbsa-gwdt"; + reg = <0x610000 0x1000>, <0x600000 0x1000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + }; + + ap_sdhci0: sdhci@6e0000 { + compatible = "marvell,armada-ap806-sdhci"; + reg = <0x6e0000 0x300>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core"; + clocks = <&ap_clk 4>; + dma-coherent; + marvell,xenon-phy-slow-mode; + status = "disabled"; + }; + + ap_syscon0: system-controller@6f4000 { + compatible = "syscon", "simple-mfd"; + reg = <0x6f4000 0x2000>; + + ap_pinctrl: pinctrl { + compatible = "marvell,ap806-pinctrl"; + + uart0_pins: uart0-pins { + marvell,pins = "mpp11", "mpp19"; + marvell,function = "uart0"; + }; + }; + + ap_gpio: gpio@1040 { + compatible = "marvell,armada-8k-gpio"; + offset = <0x1040>; + ngpios = <20>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&ap_pinctrl 0 0 20>; + }; + }; + + ap_syscon1: system-controller@6f8000 { + compatible = "syscon", "simple-mfd"; + reg = <0x6f8000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + ap_thermal: thermal-sensor@80 { + compatible = "marvell,armada-ap806-thermal"; + reg = <0x80 0x10>; + interrupt-parent = <&sei>; + interrupts = <18>; + #thermal-sensor-cells = <1>; + }; + }; + }; + }; + + /* + * The thermal IP features one internal sensor plus, if applicable, one + * remote channel wired to one sensor per CPU. + * + * Only one thermal zone per AP/CP may trigger interrupts at a time, the + * first one that will have a critical trip point will be chosen. + */ + thermal-zones { + ap_thermal_ic: ap-thermal-ic { + polling-delay-passive = <0>; /* Interrupt driven */ + polling-delay = <0>; /* Interrupt driven */ + + thermal-sensors = <&ap_thermal 0>; + + trips { + ap_crit: ap-crit { + temperature = <100000>; /* mC degrees */ + hysteresis = <2000>; /* mC degrees */ + type = "critical"; + }; + }; + + cooling-maps { }; + }; + + ap_thermal_cpu0: ap-thermal-cpu0 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 1>; + + trips { + cpu0_hot: cpu0-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu0_emerg: cpu0-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map0_hot: map0-hot { + trip = <&cpu0_hot>; + cooling-device = <&cpu0 1 2>, + <&cpu1 1 2>; + }; + map0_emerg: map0-ermerg { + trip = <&cpu0_emerg>; + cooling-device = <&cpu0 3 3>, + <&cpu1 3 3>; + }; + }; + }; + + ap_thermal_cpu1: ap-thermal-cpu1 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 2>; + + trips { + cpu1_hot: cpu1-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu1_emerg: cpu1-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map1_hot: map1-hot { + trip = <&cpu1_hot>; + cooling-device = <&cpu0 1 2>, + <&cpu1 1 2>; + }; + map1_emerg: map1-emerg { + trip = <&cpu1_emerg>; + cooling-device = <&cpu0 3 3>, + <&cpu1 3 3>; + }; + }; + }; + + ap_thermal_cpu2: ap-thermal-cpu2 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 3>; + + trips { + cpu2_hot: cpu2-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu2_emerg: cpu2-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map2_hot: map2-hot { + trip = <&cpu2_hot>; + cooling-device = <&cpu2 1 2>, + <&cpu3 1 2>; + }; + map2_emerg: map2-emerg { + trip = <&cpu2_emerg>; + cooling-device = <&cpu2 3 3>, + <&cpu3 3 3>; + }; + }; + }; + + ap_thermal_cpu3: ap-thermal-cpu3 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 4>; + + trips { + cpu3_hot: cpu3-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu3_emerg: cpu3-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map3_hot: map3-bhot { + trip = <&cpu3_hot>; + cooling-device = <&cpu2 1 2>, + <&cpu3 1 2>; + }; + map3_emerg: map3-emerg { + trip = <&cpu3_emerg>; + cooling-device = <&cpu2 3 3>, + <&cpu3 3 3>; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-common.dtsi b/arch/arm64/boot/dts/marvell/armada-common.dtsi index b29c6405d214..c04c6c475022 100644 --- a/arch/arm64/boot/dts/marvell/armada-common.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-common.dtsi @@ -6,6 +6,6 @@ /* Common definitions used by Armada 7K/8K DTs */ #define PASTER(x, y) x ## y #define EVALUATOR(x, y) PASTER(x, y) -#define CP110_LABEL(name) EVALUATOR(CP110_NAME, EVALUATOR(_, name)) -#define CP110_NODE_NAME(name) EVALUATOR(CP110_NAME, EVALUATOR(-, name)) +#define CP11X_LABEL(name) EVALUATOR(CP11X_NAME, EVALUATOR(_, name)) +#define CP11X_NODE_NAME(name) EVALUATOR(CP11X_NAME, EVALUATOR(-, name)) #define ADDRESSIFY(addr) EVALUATOR(0x, addr) diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi index d81944902650..4fd33b0fa56e 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi @@ -1,579 +1,12 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * Copyright (C) 2016 Marvell Technology Group Ltd. + * Copyright (C) 2019 Marvell Technology Group Ltd. * * Device Tree file for Marvell Armada CP110. */ -#include <dt-bindings/interrupt-controller/mvebu-icu.h> -#include <dt-bindings/thermal/thermal.h> +#define CP11X_TYPE cp110 -#include "armada-common.dtsi" +#include "armada-cp11x.dtsi" -#define CP110_PCIEx_IO_BASE(iface) (CP110_PCIE_IO_BASE + (iface * 0x10000)) -#define CP110_PCIEx_MEM_BASE(iface) (CP110_PCIE_MEM_BASE + (iface * 0x1000000)) -#define CP110_PCIEx_CONF_BASE(iface) (CP110_PCIEx_MEM_BASE(iface) + 0xf00000) - -/ { - /* - * The contents of the node are defined below, in order to - * save one indentation level - */ - CP110_NAME: CP110_NAME { }; - - /* - * CPs only have one sensor in the thermal IC. - * - * The cooling maps are empty as there are no cooling devices. - */ - thermal-zones { - CP110_LABEL(thermal_ic): CP110_NODE_NAME(thermal-ic) { - polling-delay-passive = <0>; /* Interrupt driven */ - polling-delay = <0>; /* Interrupt driven */ - - thermal-sensors = <&CP110_LABEL(thermal) 0>; - - trips { - CP110_LABEL(crit): crit { - temperature = <100000>; /* mC degrees */ - hysteresis = <2000>; /* mC degrees */ - type = "critical"; - }; - }; - - cooling-maps { }; - }; - }; -}; - -&CP110_NAME { - #address-cells = <2>; - #size-cells = <2>; - compatible = "simple-bus"; - interrupt-parent = <&CP110_LABEL(icu_nsr)>; - ranges; - - config-space@CP110_BASE { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0x0 0x0 ADDRESSIFY(CP110_BASE) 0x2000000>; - - CP110_LABEL(ethernet): ethernet@0 { - compatible = "marvell,armada-7k-pp22"; - reg = <0x0 0x100000>, <0x129000 0xb000>; - clocks = <&CP110_LABEL(clk) 1 3>, <&CP110_LABEL(clk) 1 9>, - <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>, - <&CP110_LABEL(clk) 1 18>; - clock-names = "pp_clk", "gop_clk", - "mg_clk", "mg_core_clk", "axi_clk"; - marvell,system-controller = <&CP110_LABEL(syscon0)>; - status = "disabled"; - dma-coherent; - - CP110_LABEL(eth0): eth0 { - interrupts = <39 IRQ_TYPE_LEVEL_HIGH>, - <43 IRQ_TYPE_LEVEL_HIGH>, - <47 IRQ_TYPE_LEVEL_HIGH>, - <51 IRQ_TYPE_LEVEL_HIGH>, - <55 IRQ_TYPE_LEVEL_HIGH>, - <59 IRQ_TYPE_LEVEL_HIGH>, - <63 IRQ_TYPE_LEVEL_HIGH>, - <67 IRQ_TYPE_LEVEL_HIGH>, - <71 IRQ_TYPE_LEVEL_HIGH>, - <129 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hif0", "hif1", "hif2", - "hif3", "hif4", "hif5", "hif6", "hif7", - "hif8", "link"; - port-id = <0>; - gop-port-id = <0>; - status = "disabled"; - }; - - CP110_LABEL(eth1): eth1 { - interrupts = <40 IRQ_TYPE_LEVEL_HIGH>, - <44 IRQ_TYPE_LEVEL_HIGH>, - <48 IRQ_TYPE_LEVEL_HIGH>, - <52 IRQ_TYPE_LEVEL_HIGH>, - <56 IRQ_TYPE_LEVEL_HIGH>, - <60 IRQ_TYPE_LEVEL_HIGH>, - <64 IRQ_TYPE_LEVEL_HIGH>, - <68 IRQ_TYPE_LEVEL_HIGH>, - <72 IRQ_TYPE_LEVEL_HIGH>, - <128 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hif0", "hif1", "hif2", - "hif3", "hif4", "hif5", "hif6", "hif7", - "hif8", "link"; - port-id = <1>; - gop-port-id = <2>; - status = "disabled"; - }; - - CP110_LABEL(eth2): eth2 { - interrupts = <41 IRQ_TYPE_LEVEL_HIGH>, - <45 IRQ_TYPE_LEVEL_HIGH>, - <49 IRQ_TYPE_LEVEL_HIGH>, - <53 IRQ_TYPE_LEVEL_HIGH>, - <57 IRQ_TYPE_LEVEL_HIGH>, - <61 IRQ_TYPE_LEVEL_HIGH>, - <65 IRQ_TYPE_LEVEL_HIGH>, - <69 IRQ_TYPE_LEVEL_HIGH>, - <73 IRQ_TYPE_LEVEL_HIGH>, - <127 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hif0", "hif1", "hif2", - "hif3", "hif4", "hif5", "hif6", "hif7", - "hif8", "link"; - port-id = <2>; - gop-port-id = <3>; - status = "disabled"; - }; - }; - - CP110_LABEL(comphy): phy@120000 { - compatible = "marvell,comphy-cp110"; - reg = <0x120000 0x6000>; - marvell,system-controller = <&CP110_LABEL(syscon0)>; - clocks = <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>, - <&CP110_LABEL(clk) 1 18>; - clock-names = "mg_clk", "mg_core_clk", "axi_clk"; - #address-cells = <1>; - #size-cells = <0>; - - CP110_LABEL(comphy0): phy@0 { - reg = <0>; - #phy-cells = <1>; - }; - - CP110_LABEL(comphy1): phy@1 { - reg = <1>; - #phy-cells = <1>; - }; - - CP110_LABEL(comphy2): phy@2 { - reg = <2>; - #phy-cells = <1>; - }; - - CP110_LABEL(comphy3): phy@3 { - reg = <3>; - #phy-cells = <1>; - }; - - CP110_LABEL(comphy4): phy@4 { - reg = <4>; - #phy-cells = <1>; - }; - - CP110_LABEL(comphy5): phy@5 { - reg = <5>; - #phy-cells = <1>; - }; - }; - - CP110_LABEL(mdio): mdio@12a200 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,orion-mdio"; - reg = <0x12a200 0x10>; - clocks = <&CP110_LABEL(clk) 1 9>, <&CP110_LABEL(clk) 1 5>, - <&CP110_LABEL(clk) 1 6>, <&CP110_LABEL(clk) 1 18>; - status = "disabled"; - }; - - CP110_LABEL(xmdio): mdio@12a600 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,xmdio"; - reg = <0x12a600 0x10>; - clocks = <&CP110_LABEL(clk) 1 5>, - <&CP110_LABEL(clk) 1 6>, <&CP110_LABEL(clk) 1 18>; - status = "disabled"; - }; - - CP110_LABEL(icu): interrupt-controller@1e0000 { - compatible = "marvell,cp110-icu"; - reg = <0x1e0000 0x440>; - #address-cells = <1>; - #size-cells = <1>; - - CP110_LABEL(icu_nsr): interrupt-controller@10 { - compatible = "marvell,cp110-icu-nsr"; - reg = <0x10 0x20>; - #interrupt-cells = <2>; - interrupt-controller; - msi-parent = <&gicp>; - }; - - CP110_LABEL(icu_sei): interrupt-controller@50 { - compatible = "marvell,cp110-icu-sei"; - reg = <0x50 0x10>; - #interrupt-cells = <2>; - interrupt-controller; - msi-parent = <&sei>; - }; - }; - - CP110_LABEL(rtc): rtc@284000 { - compatible = "marvell,armada-8k-rtc"; - reg = <0x284000 0x20>, <0x284080 0x24>; - reg-names = "rtc", "rtc-soc"; - interrupts = <77 IRQ_TYPE_LEVEL_HIGH>; - }; - - CP110_LABEL(syscon0): system-controller@440000 { - compatible = "syscon", "simple-mfd"; - reg = <0x440000 0x2000>; - - CP110_LABEL(clk): clock { - compatible = "marvell,cp110-clock"; - #clock-cells = <2>; - }; - - CP110_LABEL(gpio1): gpio@100 { - compatible = "marvell,armada-8k-gpio"; - offset = <0x100>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>; - interrupt-controller; - interrupts = <86 IRQ_TYPE_LEVEL_HIGH>, - <85 IRQ_TYPE_LEVEL_HIGH>, - <84 IRQ_TYPE_LEVEL_HIGH>, - <83 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <2>; - status = "disabled"; - }; - - CP110_LABEL(gpio2): gpio@140 { - compatible = "marvell,armada-8k-gpio"; - offset = <0x140>; - ngpios = <31>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&CP110_LABEL(pinctrl) 0 32 31>; - interrupt-controller; - interrupts = <82 IRQ_TYPE_LEVEL_HIGH>, - <81 IRQ_TYPE_LEVEL_HIGH>, - <80 IRQ_TYPE_LEVEL_HIGH>, - <79 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <2>; - status = "disabled"; - }; - }; - - CP110_LABEL(syscon1): system-controller@400000 { - compatible = "syscon", "simple-mfd"; - reg = <0x400000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - - CP110_LABEL(thermal): thermal-sensor@70 { - compatible = "marvell,armada-cp110-thermal"; - reg = <0x70 0x10>; - interrupts-extended = - <&CP110_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>; - #thermal-sensor-cells = <1>; - }; - }; - - CP110_LABEL(usb3_0): usb3@500000 { - compatible = "marvell,armada-8k-xhci", - "generic-xhci"; - reg = <0x500000 0x4000>; - dma-coherent; - interrupts = <106 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 22>, - <&CP110_LABEL(clk) 1 16>; - status = "disabled"; - }; - - CP110_LABEL(usb3_1): usb3@510000 { - compatible = "marvell,armada-8k-xhci", - "generic-xhci"; - reg = <0x510000 0x4000>; - dma-coherent; - interrupts = <105 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 23>, - <&CP110_LABEL(clk) 1 16>; - status = "disabled"; - }; - - CP110_LABEL(sata0): sata@540000 { - compatible = "marvell,armada-8k-ahci", - "generic-ahci"; - reg = <0x540000 0x30000>; - dma-coherent; - interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CP110_LABEL(clk) 1 15>, - <&CP110_LABEL(clk) 1 16>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - sata-port@0 { - reg = <0>; - }; - - sata-port@1 { - reg = <1>; - }; - }; - - CP110_LABEL(xor0): xor@6a0000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>; - dma-coherent; - msi-parent = <&gic_v2m0>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 8>, - <&CP110_LABEL(clk) 1 14>; - }; - - CP110_LABEL(xor1): xor@6c0000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>; - dma-coherent; - msi-parent = <&gic_v2m0>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 7>, - <&CP110_LABEL(clk) 1 14>; - }; - - CP110_LABEL(spi0): spi@700600 { - compatible = "marvell,armada-380-spi"; - reg = <0x700600 0x50>; - #address-cells = <0x1>; - #size-cells = <0x0>; - clock-names = "core", "axi"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(spi1): spi@700680 { - compatible = "marvell,armada-380-spi"; - reg = <0x700680 0x50>; - #address-cells = <1>; - #size-cells = <0>; - clock-names = "core", "axi"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(i2c0): i2c@701000 { - compatible = "marvell,mv78230-i2c"; - reg = <0x701000 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <120 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(i2c1): i2c@701100 { - compatible = "marvell,mv78230-i2c"; - reg = <0x701100 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <121 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(uart0): serial@702000 { - compatible = "snps,dw-apb-uart"; - reg = <0x702000 0x100>; - reg-shift = <2>; - interrupts = <122 IRQ_TYPE_LEVEL_HIGH>; - reg-io-width = <1>; - clock-names = "baudclk", "apb_pclk"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(uart1): serial@702100 { - compatible = "snps,dw-apb-uart"; - reg = <0x702100 0x100>; - reg-shift = <2>; - interrupts = <123 IRQ_TYPE_LEVEL_HIGH>; - reg-io-width = <1>; - clock-names = "baudclk", "apb_pclk"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(uart2): serial@702200 { - compatible = "snps,dw-apb-uart"; - reg = <0x702200 0x100>; - reg-shift = <2>; - interrupts = <124 IRQ_TYPE_LEVEL_HIGH>; - reg-io-width = <1>; - clock-names = "baudclk", "apb_pclk"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(uart3): serial@702300 { - compatible = "snps,dw-apb-uart"; - reg = <0x702300 0x100>; - reg-shift = <2>; - interrupts = <125 IRQ_TYPE_LEVEL_HIGH>; - reg-io-width = <1>; - clock-names = "baudclk", "apb_pclk"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(nand_controller): nand@720000 { - /* - * Due to the limitation of the pins available - * this controller is only usable on the CPM - * for A7K and on the CPS for A8K. - */ - compatible = "marvell,armada-8k-nand-controller", - "marvell,armada370-nand-controller"; - reg = <0x720000 0x54>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <115 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 2>, - <&CP110_LABEL(clk) 1 17>; - marvell,system-controller = <&CP110_LABEL(syscon0)>; - status = "disabled"; - }; - - CP110_LABEL(trng): trng@760000 { - compatible = "marvell,armada-8k-rng", - "inside-secure,safexcel-eip76"; - reg = <0x760000 0x7d>; - interrupts = <95 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 25>, - <&CP110_LABEL(clk) 1 17>; - status = "okay"; - }; - - CP110_LABEL(sdhci0): sdhci@780000 { - compatible = "marvell,armada-cp110-sdhci"; - reg = <0x780000 0x300>; - interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "axi"; - clocks = <&CP110_LABEL(clk) 1 4>, <&CP110_LABEL(clk) 1 18>; - dma-coherent; - status = "disabled"; - }; - - CP110_LABEL(crypto): crypto@800000 { - compatible = "inside-secure,safexcel-eip197b"; - reg = <0x800000 0x200000>; - interrupts = <87 IRQ_TYPE_LEVEL_HIGH>, - <88 IRQ_TYPE_LEVEL_HIGH>, - <89 IRQ_TYPE_LEVEL_HIGH>, - <90 IRQ_TYPE_LEVEL_HIGH>, - <91 IRQ_TYPE_LEVEL_HIGH>, - <92 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "mem", "ring0", "ring1", - "ring2", "ring3", "eip"; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 26>, - <&CP110_LABEL(clk) 1 17>; - dma-coherent; - }; - }; - - CP110_LABEL(pcie0): pcie@CP110_PCIE0_BASE { - compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; - reg = <0 ADDRESSIFY(CP110_PCIE0_BASE) 0 0x10000>, - <0 CP110_PCIEx_CONF_BASE(0) 0 0x80000>; - reg-names = "ctrl", "config"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - dma-coherent; - msi-parent = <&gic_v2m0>; - - bus-range = <0 0xff>; - ranges = - /* downstream I/O */ - <0x81000000 0 CP110_PCIEx_IO_BASE(0) 0 CP110_PCIEx_IO_BASE(0) 0 0x10000 - /* non-prefetchable memory */ - 0x82000000 0 CP110_PCIEx_MEM_BASE(0) 0 CP110_PCIEx_MEM_BASE(0) 0 0xf00000>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; - num-lanes = <1>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 13>, <&CP110_LABEL(clk) 1 14>; - status = "disabled"; - }; - - CP110_LABEL(pcie1): pcie@CP110_PCIE1_BASE { - compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; - reg = <0 ADDRESSIFY(CP110_PCIE1_BASE) 0 0x10000>, - <0 CP110_PCIEx_CONF_BASE(1) 0 0x80000>; - reg-names = "ctrl", "config"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - dma-coherent; - msi-parent = <&gic_v2m0>; - - bus-range = <0 0xff>; - ranges = - /* downstream I/O */ - <0x81000000 0 CP110_PCIEx_IO_BASE(1) 0 CP110_PCIEx_IO_BASE(1) 0 0x10000 - /* non-prefetchable memory */ - 0x82000000 0 CP110_PCIEx_MEM_BASE(1) 0 CP110_PCIEx_MEM_BASE(1) 0 0xf00000>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; - - num-lanes = <1>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 11>, <&CP110_LABEL(clk) 1 14>; - status = "disabled"; - }; - - CP110_LABEL(pcie2): pcie@CP110_PCIE2_BASE { - compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; - reg = <0 ADDRESSIFY(CP110_PCIE2_BASE) 0 0x10000>, - <0 CP110_PCIEx_CONF_BASE(2) 0 0x80000>; - reg-names = "ctrl", "config"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - dma-coherent; - msi-parent = <&gic_v2m0>; - - bus-range = <0 0xff>; - ranges = - /* downstream I/O */ - <0x81000000 0 CP110_PCIEx_IO_BASE(2) 0 CP110_PCIEx_IO_BASE(2) 0 0x10000 - /* non-prefetchable memory */ - 0x82000000 0 CP110_PCIEx_MEM_BASE(2) 0 CP110_PCIEx_MEM_BASE(2) 0 0xf00000>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; - - num-lanes = <1>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 12>, <&CP110_LABEL(clk) 1 14>; - status = "disabled"; - }; -}; +#undef CP11X_TYPE diff --git a/arch/arm64/boot/dts/marvell/armada-cp115.dtsi b/arch/arm64/boot/dts/marvell/armada-cp115.dtsi new file mode 100644 index 000000000000..1d0a9653e681 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-cp115.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell Technology Group Ltd. + * + * Device Tree file for Marvell Armada CP115. + */ + +#define CP11X_TYPE cp115 + +#include "armada-cp11x.dtsi" + +#undef CP11X_TYPE diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi new file mode 100644 index 000000000000..9dcf16beabf5 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi @@ -0,0 +1,568 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * + * Device Tree file for Marvell Armada CP11x. + */ + +#include <dt-bindings/interrupt-controller/mvebu-icu.h> +#include <dt-bindings/thermal/thermal.h> + +#include "armada-common.dtsi" + +#define CP11X_PCIEx_CONF_BASE(iface) (CP11X_PCIEx_MEM_BASE(iface) + CP11X_PCIEx_MEM_SIZE(iface)) + +/ { + /* + * The contents of the node are defined below, in order to + * save one indentation level + */ + CP11X_NAME: CP11X_NAME { }; + + /* + * CPs only have one sensor in the thermal IC. + * + * The cooling maps are empty as there are no cooling devices. + */ + thermal-zones { + CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(thermal-ic) { + polling-delay-passive = <0>; /* Interrupt driven */ + polling-delay = <0>; /* Interrupt driven */ + + thermal-sensors = <&CP11X_LABEL(thermal) 0>; + + trips { + CP11X_LABEL(crit): crit { + temperature = <100000>; /* mC degrees */ + hysteresis = <2000>; /* mC degrees */ + type = "critical"; + }; + }; + + cooling-maps { }; + }; + }; +}; + +&CP11X_NAME { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + interrupt-parent = <&CP11X_LABEL(icu_nsr)>; + ranges; + + config-space@CP11X_BASE { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x0 0x0 ADDRESSIFY(CP11X_BASE) 0x2000000>; + + CP11X_LABEL(ethernet): ethernet@0 { + compatible = "marvell,armada-7k-pp22"; + reg = <0x0 0x100000>, <0x129000 0xb000>; + clocks = <&CP11X_LABEL(clk) 1 3>, <&CP11X_LABEL(clk) 1 9>, + <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>, + <&CP11X_LABEL(clk) 1 18>; + clock-names = "pp_clk", "gop_clk", + "mg_clk", "mg_core_clk", "axi_clk"; + marvell,system-controller = <&CP11X_LABEL(syscon0)>; + status = "disabled"; + dma-coherent; + + CP11X_LABEL(eth0): eth0 { + interrupts = <39 IRQ_TYPE_LEVEL_HIGH>, + <43 IRQ_TYPE_LEVEL_HIGH>, + <47 IRQ_TYPE_LEVEL_HIGH>, + <51 IRQ_TYPE_LEVEL_HIGH>, + <55 IRQ_TYPE_LEVEL_HIGH>, + <59 IRQ_TYPE_LEVEL_HIGH>, + <63 IRQ_TYPE_LEVEL_HIGH>, + <67 IRQ_TYPE_LEVEL_HIGH>, + <71 IRQ_TYPE_LEVEL_HIGH>, + <129 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hif0", "hif1", "hif2", + "hif3", "hif4", "hif5", "hif6", "hif7", + "hif8", "link"; + port-id = <0>; + gop-port-id = <0>; + status = "disabled"; + }; + + CP11X_LABEL(eth1): eth1 { + interrupts = <40 IRQ_TYPE_LEVEL_HIGH>, + <44 IRQ_TYPE_LEVEL_HIGH>, + <48 IRQ_TYPE_LEVEL_HIGH>, + <52 IRQ_TYPE_LEVEL_HIGH>, + <56 IRQ_TYPE_LEVEL_HIGH>, + <60 IRQ_TYPE_LEVEL_HIGH>, + <64 IRQ_TYPE_LEVEL_HIGH>, + <68 IRQ_TYPE_LEVEL_HIGH>, + <72 IRQ_TYPE_LEVEL_HIGH>, + <128 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hif0", "hif1", "hif2", + "hif3", "hif4", "hif5", "hif6", "hif7", + "hif8", "link"; + port-id = <1>; + gop-port-id = <2>; + status = "disabled"; + }; + + CP11X_LABEL(eth2): eth2 { + interrupts = <41 IRQ_TYPE_LEVEL_HIGH>, + <45 IRQ_TYPE_LEVEL_HIGH>, + <49 IRQ_TYPE_LEVEL_HIGH>, + <53 IRQ_TYPE_LEVEL_HIGH>, + <57 IRQ_TYPE_LEVEL_HIGH>, + <61 IRQ_TYPE_LEVEL_HIGH>, + <65 IRQ_TYPE_LEVEL_HIGH>, + <69 IRQ_TYPE_LEVEL_HIGH>, + <73 IRQ_TYPE_LEVEL_HIGH>, + <127 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hif0", "hif1", "hif2", + "hif3", "hif4", "hif5", "hif6", "hif7", + "hif8", "link"; + port-id = <2>; + gop-port-id = <3>; + status = "disabled"; + }; + }; + + CP11X_LABEL(comphy): phy@120000 { + compatible = "marvell,comphy-cp110"; + reg = <0x120000 0x6000>; + marvell,system-controller = <&CP11X_LABEL(syscon0)>; + clocks = <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>, + <&CP11X_LABEL(clk) 1 18>; + clock-names = "mg_clk", "mg_core_clk", "axi_clk"; + #address-cells = <1>; + #size-cells = <0>; + + CP11X_LABEL(comphy0): phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + CP11X_LABEL(comphy1): phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + + CP11X_LABEL(comphy2): phy@2 { + reg = <2>; + #phy-cells = <1>; + }; + + CP11X_LABEL(comphy3): phy@3 { + reg = <3>; + #phy-cells = <1>; + }; + + CP11X_LABEL(comphy4): phy@4 { + reg = <4>; + #phy-cells = <1>; + }; + + CP11X_LABEL(comphy5): phy@5 { + reg = <5>; + #phy-cells = <1>; + }; + }; + + CP11X_LABEL(mdio): mdio@12a200 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,orion-mdio"; + reg = <0x12a200 0x10>; + clocks = <&CP11X_LABEL(clk) 1 9>, <&CP11X_LABEL(clk) 1 5>, + <&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>; + status = "disabled"; + }; + + CP11X_LABEL(xmdio): mdio@12a600 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,xmdio"; + reg = <0x12a600 0x10>; + clocks = <&CP11X_LABEL(clk) 1 5>, + <&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>; + status = "disabled"; + }; + + CP11X_LABEL(icu): interrupt-controller@1e0000 { + compatible = "marvell,cp110-icu"; + reg = <0x1e0000 0x440>; + #address-cells = <1>; + #size-cells = <1>; + + CP11X_LABEL(icu_nsr): interrupt-controller@10 { + compatible = "marvell,cp110-icu-nsr"; + reg = <0x10 0x20>; + #interrupt-cells = <2>; + interrupt-controller; + msi-parent = <&gicp>; + }; + + CP11X_LABEL(icu_sei): interrupt-controller@50 { + compatible = "marvell,cp110-icu-sei"; + reg = <0x50 0x10>; + #interrupt-cells = <2>; + interrupt-controller; + msi-parent = <&sei>; + }; + }; + + CP11X_LABEL(rtc): rtc@284000 { + compatible = "marvell,armada-8k-rtc"; + reg = <0x284000 0x20>, <0x284080 0x24>; + reg-names = "rtc", "rtc-soc"; + interrupts = <77 IRQ_TYPE_LEVEL_HIGH>; + }; + + CP11X_LABEL(syscon0): system-controller@440000 { + compatible = "syscon", "simple-mfd"; + reg = <0x440000 0x2000>; + + CP11X_LABEL(clk): clock { + compatible = "marvell,cp110-clock"; + #clock-cells = <2>; + }; + + CP11X_LABEL(gpio1): gpio@100 { + compatible = "marvell,armada-8k-gpio"; + offset = <0x100>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&CP11X_LABEL(pinctrl) 0 0 32>; + interrupt-controller; + interrupts = <86 IRQ_TYPE_LEVEL_HIGH>, + <85 IRQ_TYPE_LEVEL_HIGH>, + <84 IRQ_TYPE_LEVEL_HIGH>, + <83 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + status = "disabled"; + }; + + CP11X_LABEL(gpio2): gpio@140 { + compatible = "marvell,armada-8k-gpio"; + offset = <0x140>; + ngpios = <31>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&CP11X_LABEL(pinctrl) 0 32 31>; + interrupt-controller; + interrupts = <82 IRQ_TYPE_LEVEL_HIGH>, + <81 IRQ_TYPE_LEVEL_HIGH>, + <80 IRQ_TYPE_LEVEL_HIGH>, + <79 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + status = "disabled"; + }; + }; + + CP11X_LABEL(syscon1): system-controller@400000 { + compatible = "syscon", "simple-mfd"; + reg = <0x400000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + CP11X_LABEL(thermal): thermal-sensor@70 { + compatible = "marvell,armada-cp110-thermal"; + reg = <0x70 0x10>; + interrupts-extended = + <&CP11X_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>; + #thermal-sensor-cells = <1>; + }; + }; + + CP11X_LABEL(usb3_0): usb3@500000 { + compatible = "marvell,armada-8k-xhci", + "generic-xhci"; + reg = <0x500000 0x4000>; + dma-coherent; + interrupts = <106 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 22>, + <&CP11X_LABEL(clk) 1 16>; + status = "disabled"; + }; + + CP11X_LABEL(usb3_1): usb3@510000 { + compatible = "marvell,armada-8k-xhci", + "generic-xhci"; + reg = <0x510000 0x4000>; + dma-coherent; + interrupts = <105 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 23>, + <&CP11X_LABEL(clk) 1 16>; + status = "disabled"; + }; + + CP11X_LABEL(sata0): sata@540000 { + compatible = "marvell,armada-8k-ahci", + "generic-ahci"; + reg = <0x540000 0x30000>; + dma-coherent; + interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CP11X_LABEL(clk) 1 15>, + <&CP11X_LABEL(clk) 1 16>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata-port@0 { + reg = <0>; + }; + + sata-port@1 { + reg = <1>; + }; + }; + + CP11X_LABEL(xor0): xor@6a0000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>; + dma-coherent; + msi-parent = <&gic_v2m0>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 8>, + <&CP11X_LABEL(clk) 1 14>; + }; + + CP11X_LABEL(xor1): xor@6c0000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>; + dma-coherent; + msi-parent = <&gic_v2m0>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 7>, + <&CP11X_LABEL(clk) 1 14>; + }; + + CP11X_LABEL(spi0): spi@700600 { + compatible = "marvell,armada-380-spi"; + reg = <0x700600 0x50>; + #address-cells = <0x1>; + #size-cells = <0x0>; + clock-names = "core", "axi"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(spi1): spi@700680 { + compatible = "marvell,armada-380-spi"; + reg = <0x700680 0x50>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "core", "axi"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(i2c0): i2c@701000 { + compatible = "marvell,mv78230-i2c"; + reg = <0x701000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <120 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(i2c1): i2c@701100 { + compatible = "marvell,mv78230-i2c"; + reg = <0x701100 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <121 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(uart0): serial@702000 { + compatible = "snps,dw-apb-uart"; + reg = <0x702000 0x100>; + reg-shift = <2>; + interrupts = <122 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(uart1): serial@702100 { + compatible = "snps,dw-apb-uart"; + reg = <0x702100 0x100>; + reg-shift = <2>; + interrupts = <123 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(uart2): serial@702200 { + compatible = "snps,dw-apb-uart"; + reg = <0x702200 0x100>; + reg-shift = <2>; + interrupts = <124 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(uart3): serial@702300 { + compatible = "snps,dw-apb-uart"; + reg = <0x702300 0x100>; + reg-shift = <2>; + interrupts = <125 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(nand_controller): nand@720000 { + /* + * Due to the limitation of the pins available + * this controller is only usable on the CPM + * for A7K and on the CPS for A8K. + */ + compatible = "marvell,armada-8k-nand-controller", + "marvell,armada370-nand-controller"; + reg = <0x720000 0x54>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <115 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 2>, + <&CP11X_LABEL(clk) 1 17>; + marvell,system-controller = <&CP11X_LABEL(syscon0)>; + status = "disabled"; + }; + + CP11X_LABEL(trng): trng@760000 { + compatible = "marvell,armada-8k-rng", + "inside-secure,safexcel-eip76"; + reg = <0x760000 0x7d>; + interrupts = <95 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 25>, + <&CP11X_LABEL(clk) 1 17>; + status = "okay"; + }; + + CP11X_LABEL(sdhci0): sdhci@780000 { + compatible = "marvell,armada-cp110-sdhci"; + reg = <0x780000 0x300>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "axi"; + clocks = <&CP11X_LABEL(clk) 1 4>, <&CP11X_LABEL(clk) 1 18>; + dma-coherent; + status = "disabled"; + }; + + CP11X_LABEL(crypto): crypto@800000 { + compatible = "inside-secure,safexcel-eip197b"; + reg = <0x800000 0x200000>; + interrupts = <87 IRQ_TYPE_LEVEL_HIGH>, + <88 IRQ_TYPE_LEVEL_HIGH>, + <89 IRQ_TYPE_LEVEL_HIGH>, + <90 IRQ_TYPE_LEVEL_HIGH>, + <91 IRQ_TYPE_LEVEL_HIGH>, + <92 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mem", "ring0", "ring1", + "ring2", "ring3", "eip"; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 26>, + <&CP11X_LABEL(clk) 1 17>; + dma-coherent; + }; + }; + + CP11X_LABEL(pcie0): pcie@CP11X_PCIE0_BASE { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 ADDRESSIFY(CP11X_PCIE0_BASE) 0 0x10000>, + <0 CP11X_PCIEx_CONF_BASE(0) 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + msi-parent = <&gic_v2m0>; + + bus-range = <0 0xff>; + /* non-prefetchable memory */ + ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_SIZE(0)>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; + num-lanes = <1>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 13>, <&CP11X_LABEL(clk) 1 14>; + status = "disabled"; + }; + + CP11X_LABEL(pcie1): pcie@CP11X_PCIE1_BASE { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 ADDRESSIFY(CP11X_PCIE1_BASE) 0 0x10000>, + <0 CP11X_PCIEx_CONF_BASE(1) 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + msi-parent = <&gic_v2m0>; + + bus-range = <0 0xff>; + /* non-prefetchable memory */ + ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_SIZE(1)>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; + + num-lanes = <1>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 11>, <&CP11X_LABEL(clk) 1 14>; + status = "disabled"; + }; + + CP11X_LABEL(pcie2): pcie@CP11X_PCIE2_BASE { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 ADDRESSIFY(CP11X_PCIE2_BASE) 0 0x10000>, + <0 CP11X_PCIEx_CONF_BASE(2) 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + msi-parent = <&gic_v2m0>; + + bus-range = <0 0xff>; + /* non-prefetchable memory */ + ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_SIZE(2)>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; + + num-lanes = <1>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 12>, <&CP11X_LABEL(clk) 1 14>; + status = "disabled"; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dts b/arch/arm64/boot/dts/marvell/cn9130-db.dts new file mode 100644 index 000000000000..ce49a70d88a0 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9130-db.dts @@ -0,0 +1,403 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * Device tree for the CN9130-DB board. + */ + +#include "cn9130.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Marvell Armada CN9130-DB"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + gpio1 = &cp0_gpio1; + gpio2 = &cp0_gpio2; + i2c0 = &cp0_i2c0; + ethernet0 = &cp0_eth0; + ethernet1 = &cp0_eth1; + ethernet2 = &cp0_eth2; + spi1 = &cp0_spi0; + spi2 = &cp0_spi1; + }; + + memory@00000000 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + ap0_reg_sd_vccq: ap0_sd_vccq@0 { + compatible = "regulator-gpio"; + regulator-name = "ap0_sd_vccq"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&expander0 8 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 3300000 0x0>; + }; + + cp0_reg_usb3_vbus0: cp0_usb3_vbus@0 { + compatible = "regulator-fixed"; + regulator-name = "cp0-xhci0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&expander0 0 GPIO_ACTIVE_HIGH>; + }; + + cp0_usb3_0_phy0: cp0_usb3_phy@0 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp0_reg_usb3_vbus0>; + }; + + cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 { + compatible = "regulator-fixed"; + regulator-name = "cp0-xhci1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&expander0 1 GPIO_ACTIVE_HIGH>; + }; + + cp0_usb3_0_phy1: cp0_usb3_phy@1 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp0_reg_usb3_vbus1>; + }; + + cp0_reg_sd_vccq: cp0_sd_vccq@0 { + compatible = "regulator-gpio"; + regulator-name = "cp0_sd_vccq"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&expander0 15 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 + 3300000 0x0>; + }; + + cp0_reg_sd_vcc: cp0_sd_vcc@0 { + compatible = "regulator-fixed"; + regulator-name = "cp0_sd_vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&expander0 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + cp0_sfp_eth0: sfp-eth@0 { + compatible = "sff,sfp"; + i2c-bus = <&cp0_sfpp0_i2c>; + los-gpio = <&cp0_module_expander1 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp0_module_expander1 10 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp0_module_expander1 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp0_module_expander1 8 GPIO_ACTIVE_HIGH>; + /* + * SFP cages are unconnected on early PCBs because of an the I2C + * lanes not being connected. Prevent the port for being + * unusable by disabling the SFP node. + */ + status = "disabled"; + }; +}; + +&uart0 { + status = "okay"; +}; + +/* on-board eMMC - U9 */ +&ap_sdhci0 { + pinctrl-names = "default"; + bus-width = <8>; + vqmmc-supply = <&ap0_reg_sd_vccq>; + status = "okay"; +}; + +&cp0_crypto { + status = "disabled"; +}; + +&cp0_ethernet { + status = "okay"; +}; + +/* SLM-1521-V2, CON9 */ +&cp0_eth0 { + status = "disabled"; + phy-mode = "10gbase-kr"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy4 0>; + managed = "in-band-status"; + sfp = <&cp0_sfp_eth0>; +}; + +/* CON56 */ +&cp0_eth1 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; +}; + +/* CON57 */ +&cp0_eth2 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; +}; + +&cp0_gpio1 { + status = "okay"; +}; + +&cp0_gpio2 { + status = "okay"; +}; + +&cp0_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c0_pins>; + clock-frequency = <100000>; + + /* U36 */ + expander0: pca953x@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x21>; + status = "okay"; + }; + + /* U42 */ + eeprom0: eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <0x20>; + }; + + /* U38 */ + eeprom1: eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + pagesize = <0x20>; + }; +}; + +&cp0_i2c1 { + status = "okay"; + clock-frequency = <100000>; + + /* SLM-1521-V2 - U3 */ + i2c-mux@72 { /* verify address - depends on dpr */ + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + cp0_sfpp0_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* U12 */ + cp0_module_expander1: pca9555@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x21>; + }; + + }; + }; +}; + +&cp0_mdio { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +/* U54 */ +&cp0_nand_controller { + pinctrl-names = "default"; + pinctrl-0 = <&nand_pins &nand_rb>; + + nand@0 { + reg = <0>; + label = "main-storage"; + nand-rb = <0>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x200000>; + }; + partition@200000 { + label = "Linux"; + reg = <0x200000 0xd00000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; + }; + }; +}; + +/* SLM-1521-V2, CON6 */ +&cp0_pcie0 { + status = "okay"; + num-lanes = <4>; + num-viewport = <8>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy0 0 + &cp0_comphy1 0 + &cp0_comphy2 0 + &cp0_comphy3 0>; +}; + +&cp0_sata0 { + status = "okay"; + + /* SLM-1521-V2, CON2 */ + sata-port@1 { + status = "okay"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy5 1>; + }; +}; + +/* CON 28 */ +&cp0_sdhci0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sdhci_pins + &cp0_sdhci_cd_pins>; + bus-width = <4>; + cd-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>; + no-1-8-v; + vqmmc-supply = <&cp0_reg_sd_vccq>; + vmmc-supply = <&cp0_reg_sd_vcc>; +}; + +/* U55 */ +&cp0_spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_spi0_pins>; + reg = <0x700680 0x50>; + + spi-flash@0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + /* On-board MUX does not allow higher frequencies */ + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot-0"; + reg = <0x0 0x200000>; + }; + + partition@400000 { + label = "Filesystem-0"; + reg = <0x200000 0xe00000>; + }; + }; + }; +}; + +&cp0_syscon0 { + cp0_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp0_i2c0_pins: cp0-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp0_i2c1_pins: cp0-i2c-pins-1 { + marvell,pins = "mpp35", "mpp36"; + marvell,function = "i2c1"; + }; + cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 { + marvell,pins = "mpp0", "mpp1", "mpp2", + "mpp3", "mpp4", "mpp5", + "mpp6", "mpp7", "mpp8", + "mpp9", "mpp10", "mpp11"; + marvell,function = "ge0"; + }; + cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 { + marvell,pins = "mpp44", "mpp45", "mpp46", + "mpp47", "mpp48", "mpp49", + "mpp50", "mpp51", "mpp52", + "mpp53", "mpp54", "mpp55"; + marvell,function = "ge1"; + }; + cp0_sdhci_cd_pins: cp0-sdhci-cd-pins-0 { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + cp0_sdhci_pins: cp0-sdhi-pins-0 { + marvell,pins = "mpp56", "mpp57", "mpp58", + "mpp59", "mpp60", "mpp61"; + marvell,function = "sdio"; + }; + cp0_spi0_pins: cp0-spi-pins-0 { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + nand_pins: nand-pins { + marvell,pins = "mpp15", "mpp16", "mpp17", "mpp18", + "mpp19", "mpp20", "mpp21", "mpp22", + "mpp23", "mpp24", "mpp25", "mpp26", + "mpp27"; + marvell,function = "dev"; + }; + nand_rb: nand-rb { + marvell,pins = "mpp13"; + marvell,function = "nf"; + }; + }; +}; + +&cp0_usb3_0 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy0>; + phy-names = "usb"; +}; + +&cp0_usb3_1 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy1>; + phy-names = "usb"; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9130.dtsi b/arch/arm64/boot/dts/marvell/cn9130.dtsi new file mode 100644 index 000000000000..a2b7e5ec979d --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9130.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * Device tree for the CN9130 SoC. + */ + +#include "armada-ap807-quad.dtsi" + +/ { + model = "Marvell Armada CN9130 SoC"; + compatible = "marvell,cn9130", "marvell,armada-ap807-quad", + "marvell,armada-ap807"; +}; + +/* + * Instantiate the internal CP115 + */ + +#define CP11X_NAME cp0 +#define CP11X_BASE f2000000 +#define CP11X_PCIEx_MEM_BASE(iface) ((iface == 0) ? 0xc0000000 : \ + 0xe0000000 + ((iface - 1) * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) ((iface == 0) ? 0x1ff00000 : 0xf00000) +#define CP11X_PCIE0_BASE f2600000 +#define CP11X_PCIE1_BASE f2620000 +#define CP11X_PCIE2_BASE f2640000 + +#include "armada-cp115.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE diff --git a/arch/arm64/boot/dts/marvell/cn9131-db.dts b/arch/arm64/boot/dts/marvell/cn9131-db.dts new file mode 100644 index 000000000000..3c975f98b2a3 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9131-db.dts @@ -0,0 +1,202 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * Device tree for the CN9131-DB board. + */ + +#include "cn9130-db.dts" + +/ { + model = "Marvell Armada CN9131-DB"; + compatible = "marvell,cn9131", "marvell,cn9130", + "marvell,armada-ap807-quad", "marvell,armada-ap807"; + + aliases { + gpio3 = &cp1_gpio1; + gpio4 = &cp1_gpio2; + ethernet3 = &cp1_eth0; + ethernet4 = &cp1_eth1; + }; + + cp1_reg_usb3_vbus0: cp1_usb3_vbus@0 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_xhci0_vbus_pins>; + regulator-name = "cp1-xhci0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&cp1_gpio1 3 GPIO_ACTIVE_HIGH>; + }; + + cp1_usb3_0_phy0: cp1_usb3_phy0 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp1_reg_usb3_vbus0>; + }; + + cp1_sfp_eth1: sfp-eth1 { + compatible = "sff,sfp"; + i2c-bus = <&cp1_i2c0>; + los-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp1_gpio1 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_sfp_pins>; + /* + * SFP cages are unconnected on early PCBs because of an the I2C + * lanes not being connected. Prevent the port for being + * unusable by disabling the SFP node. + */ + status = "disabled"; + }; +}; + +/* + * Instantiate the first slave CP115 + */ + +#define CP11X_NAME cp1 +#define CP11X_BASE f4000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f4600000 +#define CP11X_PCIE1_BASE f4620000 +#define CP11X_PCIE2_BASE f4640000 + +#include "armada-cp115.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE + +&cp1_crypto { + status = "disabled"; +}; + +&cp1_ethernet { + status = "okay"; +}; + +/* CON50 */ +&cp1_eth0 { + status = "disabled"; + phy-mode = "10gbase-kr"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy4 0>; + managed = "in-band-status"; + sfp = <&cp1_sfp_eth1>; +}; + +&cp1_gpio1 { + status = "okay"; +}; + +&cp1_gpio2 { + status = "okay"; +}; + +&cp1_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_i2c0_pins>; + clock-frequency = <100000>; +}; + +/* CON40 */ +&cp1_pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp1_pcie_reset_pins>; + num-lanes = <2>; + num-viewport = <8>; + marvell,reset-gpio = <&cp1_gpio1 0 GPIO_ACTIVE_HIGH>; + status = "okay"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy0 0 + &cp1_comphy1 0>; +}; + +&cp1_sata0 { + status = "okay"; + + /* CON32 */ + sata-port@1 { + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy5 1>; + }; +}; + +/* U24 */ +&cp1_spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_spi0_pins>; + reg = <0x700680 0x50>; + + spi-flash@0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + /* On-board MUX does not allow higher frequencies */ + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot-1"; + reg = <0x0 0x200000>; + }; + + partition@400000 { + label = "Filesystem-1"; + reg = <0x200000 0xe00000>; + }; + }; + }; + +}; + +&cp1_syscon0 { + cp1_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp1_i2c0_pins: cp1-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp1_spi0_pins: cp1-spi-pins-0 { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + cp1_sfp_pins: sfp-pins { + marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11"; + marvell,function = "gpio"; + }; + cp1_pcie_reset_pins: cp1-pcie-reset-pins { + marvell,pins = "mpp0"; + marvell,function = "gpio"; + }; + }; +}; + +/* CON58 */ +&cp1_usb3_1 { + status = "okay"; + usb-phy = <&cp1_usb3_0_phy0>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy3 1>; + phy-names = "usb"; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9132-db.dts b/arch/arm64/boot/dts/marvell/cn9132-db.dts new file mode 100644 index 000000000000..4ef0df3097ca --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9132-db.dts @@ -0,0 +1,221 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * Device tree for the CN9132-DB board. + */ + +#include "cn9131-db.dts" + +/ { + model = "Marvell Armada CN9132-DB"; + compatible = "marvell,cn9132", "marvell,cn9131", "marvell,cn9130", + "marvell,armada-ap807-quad", "marvell,armada-ap807"; + + aliases { + gpio5 = &cp2_gpio1; + gpio6 = &cp2_gpio2; + ethernet5 = &cp2_eth0; + }; + + cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 { + compatible = "regulator-fixed"; + regulator-name = "cp2-xhci0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>; + }; + + cp2_usb3_0_phy0: cp2_usb3_phy0 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp2_reg_usb3_vbus0>; + }; + + cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 { + compatible = "regulator-fixed"; + regulator-name = "cp2-xhci1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>; + }; + + cp2_usb3_0_phy1: cp2_usb3_phy1 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp2_reg_usb3_vbus1>; + }; + + cp2_reg_sd_vccq: cp2_sd_vccq@0 { + compatible = "regulator-gpio"; + regulator-name = "cp2_sd_vcc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&cp2_gpio2 17 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 3300000 0x0>; + }; + + cp2_sfp_eth0: sfp-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&cp2_sfpp0_i2c>; + los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>; + /* + * SFP cages are unconnected on early PCBs because of an the I2C + * lanes not being connected. Prevent the port for being + * unusable by disabling the SFP node. + */ + status = "disabled"; + }; +}; + +/* + * Instantiate the second slave CP115 + */ + +#define CP11X_NAME cp2 +#define CP11X_BASE f6000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f6600000 +#define CP11X_PCIE1_BASE f6620000 +#define CP11X_PCIE2_BASE f6640000 + +#include "armada-cp115.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE + +&cp2_crypto { + status = "disabled"; +}; + +&cp2_ethernet { + status = "okay"; +}; + +/* SLM-1521-V2, CON9 */ +&cp2_eth0 { + status = "disabled"; + phy-mode = "10gbase-kr"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy4 0>; + managed = "in-band-status"; + sfp = <&cp2_sfp_eth0>; +}; + +&cp2_gpio1 { + status = "okay"; +}; + +&cp2_gpio2 { + status = "okay"; +}; + +&cp2_i2c0 { + clock-frequency = <100000>; + + /* SLM-1521-V2 - U3 */ + i2c-mux@72 { + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + cp2_sfpp0_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* U12 */ + cp2_module_expander1: pca9555@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x21>; + }; + }; + }; +}; + +/* SLM-1521-V2, CON6 */ +&cp2_pcie0 { + status = "okay"; + num-lanes = <2>; + num-viewport = <8>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy0 0 + &cp2_comphy1 0>; +}; + +/* SLM-1521-V2, CON8 */ +&cp2_pcie2 { + status = "okay"; + num-lanes = <1>; + num-viewport = <8>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy5 2>; +}; + +&cp2_sata0 { + status = "okay"; + + /* SLM-1521-V2, CON4 */ + sata-port@0 { + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy2 0>; + }; +}; + +/* CON 2 on SLM-1683 - microSD */ +&cp2_sdhci0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp2_sdhci_pins>; + bus-width = <4>; + cd-gpios = <&cp2_gpio2 23 GPIO_ACTIVE_LOW>; + vqmmc-supply = <&cp2_reg_sd_vccq>; +}; + +&cp2_syscon0 { + cp2_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp2_i2c0_pins: cp2-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp2_sdhci_pins: cp2-sdhi-pins-0 { + marvell,pins = "mpp56", "mpp57", "mpp58", + "mpp59", "mpp60", "mpp61"; + marvell,function = "sdio"; + }; + }; +}; + +&cp2_usb3_0 { + status = "okay"; + usb-phy = <&cp2_usb3_0_phy0>; + phy-names = "usb"; +}; + +/* SLM-1521-V2, CON11 */ +&cp2_usb3_1 { + status = "okay"; + usb-phy = <&cp2_usb3_0_phy1>; + phy-names = "usb"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy3 1>; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 97f84aa9fc6e..10b32471bc7b 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -269,6 +269,15 @@ clock-names = "spi", "wrap"; }; + systimer: timer@10017000 { + compatible = "mediatek,mt8183-timer", + "mediatek,mt6765-timer"; + reg = <0 0x10017000 0 0x1000>; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&topckgen CLK_TOP_CLK13M>; + clock-names = "clk13m"; + }; + auxadc: auxadc@11001000 { compatible = "mediatek,mt8183-auxadc", "mediatek,mt8173-auxadc"; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index bdace01561ba..f1de4ff6230a 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -115,7 +115,7 @@ }; padctl@3520000 { - status = "disabled"; + status = "okay"; avdd-pll-erefeut-supply = <&vdd_1v8_pll>; avdd-usb-supply = <&vdd_3v3_sys>; @@ -193,7 +193,7 @@ }; usb@3530000 { - status = "disabled"; + status = "okay"; phys = <&{/padctl@3520000/pads/usb2/lanes/usb2-0}>, <&{/padctl@3520000/pads/usb2/lanes/usb2-1}>, @@ -253,10 +253,14 @@ status = "disabled"; }; + /* DP on E3320 */ sor@15540000 { - status = "disabled"; + status = "okay"; + + avdd-io-hdmi-dp-supply = <&vdd_hdmi_1v05>; + vdd-hdmi-dp-pll = <&vdd_1v8_ap>; - nvidia,dpaux = <&dpaux1>; + nvidia,dpaux = <&dpaux>; }; sor@15580000 { diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 47cd831fcf44..7893d78a0fb6 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -525,6 +525,7 @@ <0x0 0x03538000 0x0 0x1000>; reg-names = "hcd", "fpci"; + iommus = <&smmu TEGRA186_SID_XUSB_HOST>; interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; @@ -1018,6 +1019,7 @@ reset-names = "vic"; power-domains = <&bpmp TEGRA186_POWER_DOMAIN_VIC>; + iommus = <&smmu TEGRA186_SID_VIC>; }; dsib: dsi@15400000 { @@ -1060,7 +1062,7 @@ }; sor1: sor@15580000 { - compatible = "nvidia,tegra186-sor1"; + compatible = "nvidia,tegra186-sor"; reg = <0x15580000 0x10000>; interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA186_CLK_SOR1>, diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi index 4c38426a6969..c7f2a20e6b02 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi @@ -8,17 +8,18 @@ compatible = "nvidia,p2888", "nvidia,tegra194"; aliases { - sdhci0 = "/cbb/sdhci@3460000"; - sdhci1 = "/cbb/sdhci@3400000"; + ethernet0 = "/cbb@0/ethernet@2490000"; + sdhci0 = "/cbb@0/sdhci@3460000"; + sdhci1 = "/cbb@0/sdhci@3400000"; serial0 = &tcu; i2c0 = "/bpmp/i2c"; - i2c1 = "/cbb/i2c@3160000"; - i2c2 = "/cbb/i2c@c240000"; - i2c3 = "/cbb/i2c@3180000"; - i2c4 = "/cbb/i2c@3190000"; - i2c5 = "/cbb/i2c@31c0000"; - i2c6 = "/cbb/i2c@c250000"; - i2c7 = "/cbb/i2c@31e0000"; + i2c1 = "/cbb@0/i2c@3160000"; + i2c2 = "/cbb@0/i2c@c240000"; + i2c3 = "/cbb@0/i2c@3180000"; + i2c4 = "/cbb@0/i2c@3190000"; + i2c5 = "/cbb@0/i2c@31c0000"; + i2c6 = "/cbb@0/i2c@c250000"; + i2c7 = "/cbb@0/i2c@31e0000"; }; chosen { @@ -26,7 +27,7 @@ stdout-path = "serial0:115200n8"; }; - cbb { + cbb@0 { ethernet@2490000 { status = "okay"; @@ -168,7 +169,7 @@ in-ldo7-8-supply = <&vdd_1v8ls>; vdd_1v0: sd0 { - regulator-name = "VDD_1V0"; + regulator-name = "VDDIO_SYS_1V0"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; @@ -176,7 +177,7 @@ }; vdd_1v8hs: sd1 { - regulator-name = "VDD_1V8HS"; + regulator-name = "VDDIO_SYS_1V8HS"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; @@ -184,7 +185,7 @@ }; vdd_1v8ls: sd2 { - regulator-name = "VDD_1V8LS"; + regulator-name = "VDDIO_SYS_1V8LS"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; @@ -192,7 +193,7 @@ }; vdd_1v8ao: sd3 { - regulator-name = "VDD_1V8AO"; + regulator-name = "VDDIO_AO_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; @@ -216,7 +217,7 @@ }; ldo2 { - regulator-name = "VDD_AO_3V3"; + regulator-name = "VDDIO_AO_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; @@ -242,7 +243,7 @@ }; ldo7 { - regulator-name = "VDD_CSI_1V2"; + regulator-name = "AVDD_CSI_1V2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; @@ -309,9 +310,8 @@ regulator-name = "VDD_12V"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_LOW>; + gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_HIGH>; regulator-boot-on; - enable-active-low; }; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts index d47cd8c4dd24..353a6a22196d 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts @@ -10,8 +10,8 @@ model = "NVIDIA Jetson AGX Xavier Developer Kit"; compatible = "nvidia,p2972-0000", "nvidia,tegra194"; - cbb { - aconnect { + cbb@0 { + aconnect@2900000 { status = "okay"; dma-controller@2930000 { @@ -46,10 +46,39 @@ status = "okay"; }; + dpaux@155c0000 { + status = "okay"; + }; + + dpaux@155d0000 { + status = "okay"; + }; + dpaux@155e0000 { status = "okay"; }; + /* DP0 */ + sor@15b00000 { + status = "okay"; + + avdd-io-hdmi-dp-supply = <&vdd_1v0>; + vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>; + + nvidia,dpaux = <&dpaux0>; + }; + + /* DP1 */ + sor@15b40000 { + status = "okay"; + + avdd-io-hdmi-dp-supply = <&vdd_1v0>; + vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>; + + nvidia,dpaux = <&dpaux1>; + }; + + /* HDMI */ sor@15b80000 { status = "okay"; diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index 3c0cf54f0aab..11220d97adb8 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -15,7 +15,7 @@ #size-cells = <2>; /* control backbone */ - cbb { + cbb@0 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -39,7 +39,8 @@ }; ethernet@2490000 { - compatible = "nvidia,tegra186-eqos", + compatible = "nvidia,tegra194-eqos", + "nvidia,tegra186-eqos", "snps,dwc-qos-ethernet-4.10"; reg = <0x02490000 0x10000>; interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; @@ -60,7 +61,7 @@ snps,rxpbl = <8>; }; - aconnect { + aconnect@2900000 { compatible = "nvidia,tegra194-aconnect", "nvidia,tegra210-aconnect"; clocks = <&bpmp TEGRA194_CLK_APE>, @@ -1078,7 +1079,7 @@ sor1: sor@15b40000 { compatible = "nvidia,tegra194-sor"; - reg = <0x155c0000 0x40000>; + reg = <0x15b40000 0x40000>; interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_SOR1_REF>, <&bpmp TEGRA194_CLK_SOR1_OUT>, @@ -1185,7 +1186,6 @@ nvidia,bpmp = <&bpmp 1>; - supports-clkreq; nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; @@ -1231,7 +1231,6 @@ nvidia,bpmp = <&bpmp 2>; - supports-clkreq; nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; @@ -1277,7 +1276,6 @@ nvidia,bpmp = <&bpmp 3>; - supports-clkreq; nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; @@ -1323,7 +1321,6 @@ nvidia,bpmp = <&bpmp 4>; - supports-clkreq; nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; @@ -1369,7 +1366,6 @@ nvidia,bpmp = <&bpmp 0>; - supports-clkreq; nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; @@ -1419,7 +1415,6 @@ interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - supports-clkreq; nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; @@ -1478,60 +1473,192 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0_0: cpu@0 { compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; - reg = <0x10000>; + reg = <0x000>; enable-method = "psci"; + i-cache-size = <131072>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2c_0>; }; - cpu@1 { + cpu0_1: cpu@1 { compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; - reg = <0x10001>; + reg = <0x001>; enable-method = "psci"; + i-cache-size = <131072>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2c_0>; }; - cpu@2 { + cpu1_0: cpu@100 { compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; reg = <0x100>; enable-method = "psci"; + i-cache-size = <131072>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2c_1>; }; - cpu@3 { + cpu1_1: cpu@101 { compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; reg = <0x101>; enable-method = "psci"; + i-cache-size = <131072>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2c_1>; }; - cpu@4 { + cpu2_0: cpu@200 { compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; reg = <0x200>; enable-method = "psci"; + i-cache-size = <131072>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2c_2>; }; - cpu@5 { + cpu2_1: cpu@201 { compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; reg = <0x201>; enable-method = "psci"; + i-cache-size = <131072>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2c_2>; }; - cpu@6 { + cpu3_0: cpu@300 { compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; - reg = <0x10300>; + reg = <0x300>; enable-method = "psci"; + i-cache-size = <131072>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2c_3>; }; - cpu@7 { + cpu3_1: cpu@301 { compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; - reg = <0x10301>; + reg = <0x301>; enable-method = "psci"; + i-cache-size = <131072>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2c_3>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0_0>; + }; + + core1 { + cpu = <&cpu0_1>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu1_0>; + }; + + core1 { + cpu = <&cpu1_1>; + }; + }; + + cluster2 { + core0 { + cpu = <&cpu2_0>; + }; + + core1 { + cpu = <&cpu2_1>; + }; + }; + + cluster3 { + core0 { + cpu = <&cpu3_0>; + }; + + core1 { + cpu = <&cpu3_1>; + }; + }; + }; + + l2c_0: l2-cache0 { + cache-size = <2097152>; + cache-line-size = <64>; + cache-sets = <2048>; + next-level-cache = <&l3c>; + }; + + l2c_1: l2-cache1 { + cache-size = <2097152>; + cache-line-size = <64>; + cache-sets = <2048>; + next-level-cache = <&l3c>; + }; + + l2c_2: l2-cache2 { + cache-size = <2097152>; + cache-line-size = <64>; + cache-sets = <2048>; + next-level-cache = <&l3c>; + }; + + l2c_3: l2-cache3 { + cache-size = <2097152>; + cache-line-size = <64>; + cache-sets = <2048>; + next-level-cache = <&l3c>; + }; + + l3c: l3-cache { + cache-size = <4194304>; + cache-line-size = <64>; + cache-sets = <4096>; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi index 27723829d033..cb58f79deb48 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi @@ -279,6 +279,13 @@ pmc@7000e400 { nvidia,invert-interrupt; + nvidia,suspend-mode = <0>; + nvidia,cpu-pwr-good-time = <0>; + nvidia,cpu-pwr-off-time = <0>; + nvidia,core-pwr-good-time = <4587 3876>; + nvidia,core-pwr-off-time = <39065>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; }; /* eMMC */ diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi index a7dc319214a4..b0095072bc28 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi @@ -1612,7 +1612,7 @@ regulator-name = "VDD_HDMI_5V0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&exp1 12 GPIO_ACTIVE_LOW>; + gpio = <&exp1 12 GPIO_ACTIVE_HIGH>; enable-active-high; vin-supply = <&vdd_5v0_sys>; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts index 9d17ec707bce..90381d52ac54 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts @@ -64,6 +64,16 @@ status = "okay"; }; + sor@54540000 { + status = "okay"; + + avdd-io-hdmi-dp-supply = <&avdd_io_edp_1v05>; + vdd-hdmi-dp-pll-supply = <&vdd_1v8>; + + nvidia,xbar-cfg = <2 1 0 3 4>; + nvidia,dpaux = <&dpaux>; + }; + sor@54580000 { status = "okay"; @@ -76,6 +86,10 @@ GPIO_ACTIVE_LOW>; nvidia,xbar-cfg = <0 1 2 3 4>; }; + + dpaux@545c0000 { + status = "okay"; + }; }; gpu@57000000 { @@ -382,6 +396,13 @@ pmc@7000e400 { nvidia,invert-interrupt; + nvidia,suspend-mode = <0>; + nvidia,cpu-pwr-good-time = <0>; + nvidia,cpu-pwr-off-time = <0>; + nvidia,core-pwr-good-time = <4587 3876>; + nvidia,core-pwr-off-time = <39065>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; }; hda@70030000 { @@ -680,5 +701,19 @@ enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>; vin-supply = <&vdd_5v0_sys>; }; + + avdd_io_edp_1v05: regulator@7 { + compatible = "regulator-fixed"; + reg = <7>; + + regulator-name = "AVDD_IO_EDP_1V05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + + gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&avdd_1v05_pll>; + }; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 659753118e96..48c63256ba7f 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -254,10 +254,11 @@ reg = <0x0 0x54540000 0x0 0x00040000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA210_CLK_SOR0>, + <&tegra_car TEGRA210_CLK_SOR0_OUT>, <&tegra_car TEGRA210_CLK_PLL_D_OUT0>, <&tegra_car TEGRA210_CLK_PLL_DP>, <&tegra_car TEGRA210_CLK_SOR_SAFE>; - clock-names = "sor", "parent", "dp", "safe"; + clock-names = "sor", "out", "parent", "dp", "safe"; resets = <&tegra_car 182>; reset-names = "sor"; pinctrl-0 = <&state_dpaux_aux>; @@ -768,7 +769,8 @@ rtc@7000e000 { compatible = "nvidia,tegra210-rtc", "nvidia,tegra20-rtc"; reg = <0x0 0x7000e000 0x0 0x100>; - interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pmc>; clocks = <&tegra_car TEGRA210_CLK_RTC>; clock-names = "rtc"; }; @@ -778,6 +780,8 @@ reg = <0x0 0x7000e400 0x0 0x400>; clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; + #interrupt-cells = <2>; + interrupt-controller; powergates { pd_audio: aud { @@ -1438,6 +1442,16 @@ }; }; + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&{/cpus/cpu@0} &{/cpus/cpu@1} + &{/cpus/cpu@2} &{/cpus/cpu@3}>; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 @@ -1457,7 +1471,9 @@ reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */ 0x0 0x60006000 0x0 0x400>; /* CAR reg_base */ reg-names = "soctherm-reg", "car-reg"; - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "thermal", "edp"; clocks = <&tegra_car TEGRA210_CLK_TSENSOR>, <&tegra_car TEGRA210_CLK_SOC_THERM>; clock-names = "tsensor", "soctherm"; @@ -1504,6 +1520,7 @@ }; }; }; + mem { polling-delay-passive = <0>; polling-delay = <0>; @@ -1526,6 +1543,7 @@ */ }; }; + gpu { polling-delay-passive = <1000>; polling-delay = <0>; @@ -1554,6 +1572,7 @@ }; }; }; + pllx { polling-delay-passive = <0>; polling-delay = <0>; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index 04ad2fb22b9a..dba3488492f1 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -623,6 +623,8 @@ l21 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; }; l22 { regulator-min-microvolt = <3300000>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts index 2b28e383fd0b..d1ccb9472c8b 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -5,6 +5,7 @@ #include "msm8916.dtsi" #include "pm8916.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "Longcheer L8150"; @@ -18,6 +19,16 @@ stdout-path = "serial0"; }; + reserved-memory { + // wcnss.mdt is not relocatable, so it must be loaded at 0x8b600000 + /delete-node/ wcnss@89300000; + + wcnss_mem: wcnss@8b600000 { + reg = <0x0 0x8b600000 0x0 0x600000>; + no-map; + }; + }; + soc { sdhci@7824000 { status = "okay"; @@ -68,6 +79,10 @@ }; }; + wcnss@a21b000 { + status = "okay"; + }; + /* * Attempting to enable these devices causes a "synchronous * external abort". Suspected cause is that the debug power @@ -99,9 +114,36 @@ pinctrl-names = "default"; pinctrl-0 = <&usb_vbus_default>; }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; }; &msmgpio { + gpio_keys_default: gpio_keys_default { + pinmux { + function = "gpio"; + pins = "gpio107"; + }; + pinconf { + pins = "gpio107"; + drive-strength = <2>; + bias-pull-up; + }; + }; + usb_vbus_default: usb-vbus-default { pinmux { function = "gpio"; @@ -114,6 +156,19 @@ }; }; +&spmi_bus { + pm8916@0 { + pon@800 { + volume-down { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + }; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index e675ff48fdd2..bd1eb3eeca53 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -3,6 +3,7 @@ #include "msm8916.dtsi" #include "pm8916.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -63,6 +64,10 @@ }; }; + wcnss@a21b000 { + status = "okay"; + }; + /* * Attempting to enable these devices causes a "synchronous * external abort". Suspected cause is that the debug power @@ -87,6 +92,44 @@ etm@85f000 { status = "disabled"; }; }; + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + home { + label = "Home"; + gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOMEPAGE>; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_hall_sensor_default>; + + label = "GPIO Hall Effect Sensor"; + + hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + }; + }; + i2c-muic { compatible = "i2c-gpio"; sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; @@ -109,6 +152,30 @@ }; &msmgpio { + gpio_keys_default: gpio_keys_default { + pinmux { + function = "gpio"; + pins = "gpio107", "gpio109"; + }; + pinconf { + pins = "gpio107", "gpio109"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + gpio_hall_sensor_default: gpio_hall_sensor_default { + pinmux { + function = "gpio"; + pins = "gpio52"; + }; + pinconf { + pins = "gpio52"; + drive-strength = <2>; + bias-disable; + }; + }; + muic_int_default: muic_int_default { pinmux { function = "gpio"; @@ -234,3 +301,16 @@ regulator-max-microvolt = <2700000>; }; }; + +&spmi_bus { + pm8916@0 { + pon@800 { + volume-down { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts index 1aa59da98495..6629a621139c 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts @@ -8,3 +8,9 @@ model = "Samsung Galaxy A5U (EUR)"; compatible = "samsung,a5u-eur", "qcom,msm8916"; }; + +&pronto { + iris { + compatible = "qcom,wcn3680"; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 5ea9fb8f2f87..8686e101905c 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -179,7 +179,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; - thermal-sensors = <&tsens 4>; + thermal-sensors = <&tsens 5>; trips { cpu0_1_alert0: trip-point@0 { @@ -209,7 +209,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; - thermal-sensors = <&tsens 3>; + thermal-sensors = <&tsens 4>; trips { cpu2_3_alert0: trip-point@0 { diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 87f4d9c1b0d4..4ca2e7b44559 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -591,6 +591,8 @@ reg = <0x4a9000 0x1000>, /* TM */ <0x4a8000 0x1000>; /* SROT */ #qcom,sensors = <13>; + interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; #thermal-sensor-cells = <1>; }; @@ -599,6 +601,8 @@ reg = <0x4ad000 0x1000>, /* TM */ <0x4ac000 0x1000>; /* SROT */ #qcom,sensors = <8>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; #thermal-sensor-cells = <1>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi index 9682d4dd7496..6138b58db6d2 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi @@ -23,6 +23,57 @@ }; }; +&blsp1_uart3 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +/* + * The laptop FW does not appear to support the retention state as it is + * not advertised as enabled in ACPI, and enabling it in DT can cause boot + * hangs. + */ +&CPU0 { + cpu-idle-states = <&LITTLE_CPU_SLEEP_1>; +}; + +&CPU1 { + cpu-idle-states = <&LITTLE_CPU_SLEEP_1>; +}; + +&CPU2 { + cpu-idle-states = <&LITTLE_CPU_SLEEP_1>; +}; + +&CPU3 { + cpu-idle-states = <&LITTLE_CPU_SLEEP_1>; +}; + +&CPU4 { + cpu-idle-states = <&BIG_CPU_SLEEP_1>; +}; + +&CPU5 { + cpu-idle-states = <&BIG_CPU_SLEEP_1>; +}; + +&CPU6 { + cpu-idle-states = <&BIG_CPU_SLEEP_1>; +}; + +&CPU7 { + cpu-idle-states = <&BIG_CPU_SLEEP_1>; +}; + &qusb2phy { status = "okay"; @@ -104,6 +155,7 @@ vreg_l7a_1p8: l7 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-allow-set-load; }; vreg_l8a_1p2: l8 { regulator-min-microvolt = <1200000>; @@ -144,6 +196,7 @@ vreg_l17a_1p3: l17 { regulator-min-microvolt = <1304000>; regulator-max-microvolt = <1304000>; + regulator-allow-set-load; }; vreg_l18a_2p7: l18 { regulator-min-microvolt = <2704000>; @@ -179,6 +232,7 @@ vreg_l25a_3p3: l25 { regulator-min-microvolt = <3104000>; regulator-max-microvolt = <3312000>; + regulator-allow-set-load; }; vreg_l26a_1p2: l26 { regulator-min-microvolt = <1200000>; diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi index 108667ce4f31..5f101a20a20a 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi @@ -23,10 +23,84 @@ }; }; +&blsp1_uart3 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + &blsp2_uart1 { status = "okay"; }; +&etf { + status = "okay"; +}; + +&etm1 { + status = "okay"; +}; + +&etm2 { + status = "okay"; +}; + +&etm3 { + status = "okay"; +}; + +&etm4 { + status = "okay"; +}; + +&etm5 { + status = "okay"; +}; + +&etm6 { + status = "okay"; +}; + +&etm7 { + status = "okay"; +}; + +&etm8 { + status = "okay"; +}; + +&etr { + status = "okay"; +}; + +&funnel1 { + status = "okay"; +}; + +&funnel2 { + status = "okay"; +}; + +&funnel3 { + status = "okay"; +}; + +&funnel4 { + status = "okay"; +}; + +&funnel5 { + status = "okay"; +}; + &pm8005_lsid1 { pm8005-regulators { compatible = "qcom,pm8005-regulators"; @@ -51,6 +125,10 @@ vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; }; +&replicator1 { + status = "okay"; +}; + &rpm_requests { pm8998-regulators { compatible = "qcom,rpm-pm8998-regulators"; @@ -249,6 +327,10 @@ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; }; +&stm { + status = "okay"; +}; + &ufshc { vcc-supply = <&vreg_l20a_2p95>; vccq-supply = <&vreg_l26a_1p2>; diff --git a/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi index 6db70acd38ee..e32d3ab395ea 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi @@ -75,4 +75,17 @@ drive-strength = <2>; /* 2 mA */ }; }; + + blsp1_uart3_on: blsp1_uart3_on { + mux { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "blsp_uart3_a"; + }; + + config { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + drive-strength = <2>; + bias-disable; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index c6f81431983e..fc7838ea9a01 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -816,8 +816,9 @@ compatible = "qcom,msm8998-tsens", "qcom,tsens-v2"; reg = <0x010ab000 0x1000>, /* TM */ <0x010aa000 0x1000>; /* SROT */ - #qcom,sensors = <14>; + interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; #thermal-sensor-cells = <1>; }; @@ -825,8 +826,9 @@ compatible = "qcom,msm8998-tsens", "qcom,tsens-v2"; reg = <0x010ae000 0x1000>, /* TM */ <0x010ad000 0x1000>; /* SROT */ - #qcom,sensors = <8>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; #thermal-sensor-cells = <1>; }; @@ -998,11 +1000,12 @@ #interrupt-cells = <0x2>; }; - stm@6002000 { + stm: stm@6002000 { compatible = "arm,coresight-stm", "arm,primecell"; reg = <0x06002000 0x1000>, <0x16280000 0x180000>; reg-names = "stm-base", "stm-data-base"; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1016,9 +1019,10 @@ }; }; - funnel@6041000 { + funnel1: funnel@6041000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x06041000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1045,9 +1049,10 @@ }; }; - funnel@6042000 { + funnel2: funnel@6042000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x06042000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1075,9 +1080,10 @@ }; }; - funnel@6045000 { + funnel3: funnel@6045000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x06045000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1113,9 +1119,10 @@ }; }; - replicator@6046000 { + replicator1: replicator@6046000 { compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; reg = <0x06046000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1137,9 +1144,10 @@ }; }; - etf@6047000 { + etf: etf@6047000 { compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0x06047000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1163,9 +1171,10 @@ }; }; - etr@6048000 { + etr: etr@6048000 { compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0x06048000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1181,9 +1190,10 @@ }; }; - etm@7840000 { + etm1: etm@7840000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x07840000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1200,9 +1210,10 @@ }; }; - etm@7940000 { + etm2: etm@7940000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x07940000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1219,9 +1230,10 @@ }; }; - etm@7a40000 { + etm3: etm@7a40000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x07a40000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1238,9 +1250,10 @@ }; }; - etm@7b40000 { + etm4: etm@7b40000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x07b40000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1257,9 +1270,10 @@ }; }; - funnel@7b60000 { /* APSS Funnel */ + funnel4: funnel@7b60000 { /* APSS Funnel */ compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x07b60000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1343,9 +1357,10 @@ }; }; - funnel@7b70000 { + funnel5: funnel@7b70000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x07b70000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1369,9 +1384,10 @@ }; }; - etm@7c40000 { + etm5: etm@7c40000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x07c40000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1385,9 +1401,10 @@ }; }; - etm@7d40000 { + etm6: etm@7d40000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x07d40000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1401,9 +1418,10 @@ }; }; - etm@7e40000 { + etm7: etm@7e40000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x07e40000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1417,9 +1435,10 @@ }; }; - etm@7f40000 { + etm8: etm@7f40000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x07f40000 0x1000>; + status = "disabled"; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; @@ -1556,6 +1575,33 @@ status = "disabled"; }; + blsp1_dma: dma@c144000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x0c144000 0x25000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <18>; + qcom,num-ees = <4>; + }; + + blsp1_uart3: serial@c171000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x0c171000 0x1000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 4>, <&blsp1_dma 5>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart3_on>; + status = "disabled"; + }; + blsp1_i2c1: i2c@c175000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x0c175000 0x600>; diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index a97eeb4569c0..f5f0c4c9cb16 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -22,6 +22,12 @@ #clock-cells = <0>; clock-frequency = <19200000>; }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; cpus { @@ -283,6 +289,15 @@ clock-names = "core"; }; + bimc: interconnect@400000 { + reg = <0x00400000 0x80000>; + compatible = "qcom,qcs404-bimc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + }; + tsens: thermal-sensor@4a9000 { compatible = "qcom,qcs404-tsens", "qcom,tsens-v1"; reg = <0x004a9000 0x1000>, /* TM */ @@ -290,9 +305,29 @@ nvmem-cells = <&tsens_caldata>; nvmem-cell-names = "calib"; #qcom,sensors = <10>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; #thermal-sensor-cells = <1>; }; + pcnoc: interconnect@500000 { + reg = <0x00500000 0x15080>; + compatible = "qcom,qcs404-pcnoc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_PNOC_CLK>, + <&rpmcc RPM_SMD_PNOC_A_CLK>; + }; + + snoc: interconnect@580000 { + reg = <0x00580000 0x23080>; + compatible = "qcom,qcs404-snoc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + }; + remoteproc_cdsp: remoteproc@b00000 { compatible = "qcom,qcs404-cdsp-pas"; reg = <0x00b00000 0x4040>; @@ -869,6 +904,12 @@ #mbox-cells = <1>; }; + watchdog@b017000 { + compatible = "qcom,kpss-wdt"; + reg = <0x0b017000 0x1000>; + clocks = <&sleep_clk>; + }; + timer@b120000 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi index 34881c0113cb..9a4ff57fc877 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi @@ -165,6 +165,8 @@ /delete-node/ &venus_mem; /delete-node/ &cdsp_mem; /delete-node/ &cdsp_pas; +/delete-node/ &zap_shader; +/delete-node/ &gpu_mem; /* Increase the size from 120 MB to 128 MB */ &mpss_region { @@ -701,9 +703,8 @@ ap_ts_i2c: &i2c14 { &ufs_mem_hc { status = "okay"; - pinctrl-names = "init", "default"; - pinctrl-0 = <&ufs_dev_reset_assert>; - pinctrl-1 = <&ufs_dev_reset_deassert>; + + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; vcc-supply = <&src_pp2950_l20a>; vcc-max-microamp = <600000>; @@ -1258,52 +1259,6 @@ ap_ts_i2c: &i2c14 { }; }; - ufs_dev_reset_assert: ufs_dev_reset_assert { - config { - pins = "ufs_reset"; - bias-pull-down; /* default: pull down */ - /* - * UFS_RESET driver strengths are having - * different values/steps compared to typical - * GPIO drive strengths. - * - * Following table clarifies: - * - * HDRV value | UFS_RESET | Typical GPIO - * (dec) | (mA) | (mA) - * 0 | 0.8 | 2 - * 1 | 1.55 | 4 - * 2 | 2.35 | 6 - * 3 | 3.1 | 8 - * 4 | 3.9 | 10 - * 5 | 4.65 | 12 - * 6 | 5.4 | 14 - * 7 | 6.15 | 16 - * - * POR value for UFS_RESET HDRV is 3 which means - * 3.1mA and we want to use that. Hence just - * specify 8mA to "drive-strength" binding and - * that should result into writing 3 to HDRV - * field. - */ - drive-strength = <8>; /* default: 3.1 mA */ - output-low; /* active low reset */ - }; - }; - - ufs_dev_reset_deassert: ufs_dev_reset_deassert { - config { - pins = "ufs_reset"; - bias-pull-down; /* default: pull down */ - /* - * default: 3.1 mA - * check comments under ufs_dev_reset_assert - */ - drive-strength = <8>; - output-high; /* active low reset */ - }; - }; - ap_suspend_l_assert: ap_suspend_l_assert { config { pins = "gpio126"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index f5a85caff1a3..d100f46791a6 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -312,6 +312,18 @@ regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; }; pmi8998-rpmh-regulators { diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index f406a4340b05..ddb1f23c936f 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -2824,7 +2824,7 @@ qcom,gmu = <&gmu>; - zap-shader { + zap_shader: zap-shader { memory-region = <&gpu_mem>; }; @@ -2950,6 +2950,8 @@ reg = <0 0x0c263000 0 0x1ff>, /* TM */ <0 0x0c222000 0 0x1ff>; /* SROT */ #qcom,sensors = <13>; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; #thermal-sensor-cells = <1>; }; @@ -2958,6 +2960,8 @@ reg = <0 0x0c265000 0 0x1ff>, /* TM */ <0 0x0c223000 0 0x1ff>; /* SROT */ #qcom,sensors = <8>; + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; #thermal-sensor-cells = <1>; }; @@ -3084,6 +3088,12 @@ status = "disabled"; }; + watchdog@17980000 { + compatible = "qcom,apss-wdt-sdm845", "qcom,kpss-wdt"; + reg = <0 0x17980000 0 0x1000>; + clocks = <&sleep_clk>; + }; + apss_shared: mailbox@17990000 { compatible = "qcom,sdm845-apss-shared"; reg = <0 0x17990000 0 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index ded120d3aef5..13dc619687f3 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -20,6 +20,11 @@ }; }; +&adsp_pas { + firmware-name = "qcom/LENOVO/81JL/qcadsp850.mbn"; + status = "okay"; +}; + &apps_rsc { pm8998-rpmh-regulators { compatible = "qcom,pm8998-rpmh-regulators"; @@ -229,6 +234,11 @@ status = "disabled"; }; +&cdsp_pas { + firmware-name = "qcom/LENOVO/81JL/qccdsp850.mbn"; + status = "okay"; +}; + &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -296,6 +306,10 @@ }; }; +&mss_pil { + firmware-name = "qcom/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/LENOVO/81JL/qcdsp2850.mbn"; +}; + &qup_i2c12_default { drive-strength = <2>; bias-disable; diff --git a/arch/arm64/boot/dts/realtek/Makefile b/arch/arm64/boot/dts/realtek/Makefile index 90c897ac3f7a..555638ada721 100644 --- a/arch/arm64/boot/dts/realtek/Makefile +++ b/arch/arm64/boot/dts/realtek/Makefile @@ -1,4 +1,9 @@ # SPDX-License-Identifier: GPL-2.0-only + +dtb-$(CONFIG_ARCH_REALTEK) += rtd1293-ds418j.dtb + dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-mele-v9.dtb dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-probox2-ava.dtb dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-zidoo-x9s.dtb + +dtb-$(CONFIG_ARCH_REALTEK) += rtd1296-ds418.dtb diff --git a/arch/arm64/boot/dts/realtek/rtd1293-ds418j.dts b/arch/arm64/boot/dts/realtek/rtd1293-ds418j.dts new file mode 100644 index 000000000000..b2dd583146b4 --- /dev/null +++ b/arch/arm64/boot/dts/realtek/rtd1293-ds418j.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +/* + * Copyright (c) 2017 Andreas Färber + */ + +/dts-v1/; + +#include "rtd1293.dtsi" + +/ { + compatible = "synology,ds418j", "realtek,rtd1293"; + model = "Synology DiskStation DS418j"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/realtek/rtd1293.dtsi b/arch/arm64/boot/dts/realtek/rtd1293.dtsi new file mode 100644 index 000000000000..bd4e22723f7b --- /dev/null +++ b/arch/arm64/boot/dts/realtek/rtd1293.dtsi @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +/* + * Realtek RTD1293 SoC + * + * Copyright (c) 2017-2019 Andreas Färber + */ + +#include "rtd129x.dtsi" + +/ { + compatible = "realtek,rtd1293"; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + next-level-cache = <&l2>; + }; + + l2: l2-cache { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; + +&arm_pmu { + interrupt-affinity = <&cpu0>, <&cpu1>; +}; diff --git a/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts b/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts index da19faab29d5..e98e508b9514 100644 --- a/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts +++ b/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) /* * Copyright (c) 2016-2017 Andreas Färber - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; diff --git a/arch/arm64/boot/dts/realtek/rtd1295.dtsi b/arch/arm64/boot/dts/realtek/rtd1295.dtsi index 41d7858da826..93f0e1d97721 100644 --- a/arch/arm64/boot/dts/realtek/rtd1295.dtsi +++ b/arch/arm64/boot/dts/realtek/rtd1295.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) /* * Realtek RTD1295 SoC * * Copyright (c) 2016-2017 Andreas Färber - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ #include "rtd129x.dtsi" diff --git a/arch/arm64/boot/dts/realtek/rtd1296-ds418.dts b/arch/arm64/boot/dts/realtek/rtd1296-ds418.dts new file mode 100644 index 000000000000..5a051a52bf88 --- /dev/null +++ b/arch/arm64/boot/dts/realtek/rtd1296-ds418.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +/* + * Copyright (c) 2017-2019 Andreas Färber + */ + +/dts-v1/; + +#include "rtd1296.dtsi" + +/ { + compatible = "synology,ds418", "realtek,rtd1296"; + model = "Synology DiskStation DS418"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x80000000>; + }; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/realtek/rtd1296.dtsi b/arch/arm64/boot/dts/realtek/rtd1296.dtsi new file mode 100644 index 000000000000..0f9e59cac086 --- /dev/null +++ b/arch/arm64/boot/dts/realtek/rtd1296.dtsi @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +/* + * Realtek RTD1296 SoC + * + * Copyright (c) 2017-2019 Andreas Färber + */ + +#include "rtd129x.dtsi" + +/ { + compatible = "realtek,rtd1296"; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x2>; + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x3>; + next-level-cache = <&l2>; + }; + + l2: l2-cache { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; + +&arm_pmu { + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; +}; diff --git a/arch/arm64/boot/dts/realtek/rtd129x.dtsi b/arch/arm64/boot/dts/realtek/rtd129x.dtsi index b9cb92466fc7..4433114476f5 100644 --- a/arch/arm64/boot/dts/realtek/rtd129x.dtsi +++ b/arch/arm64/boot/dts/realtek/rtd129x.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) /* * Realtek RTD1293/RTD1295/RTD1296 SoC * * Copyright (c) 2016-2017 Andreas Färber - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /memreserve/ 0x0000000000000000 0x0000000000030000; @@ -13,6 +12,7 @@ /memreserve/ 0x0000000001ffe000 0x0000000000004000; #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/realtek,rtd1295.h> / { interrupt-parent = <&gic>; @@ -24,6 +24,13 @@ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; }; + osc27M: osc { + compatible = "fixed-clock"; + clock-frequency = <27000000>; + #clock-cells = <0>; + clock-output-names = "osc27M"; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -31,12 +38,49 @@ /* Exclude up to 2 GiB of RAM */ ranges = <0x80000000 0x80000000 0x80000000>; + reset1: reset-controller@98000000 { + compatible = "snps,dw-low-reset"; + reg = <0x98000000 0x4>; + #reset-cells = <1>; + }; + + reset2: reset-controller@98000004 { + compatible = "snps,dw-low-reset"; + reg = <0x98000004 0x4>; + #reset-cells = <1>; + }; + + reset3: reset-controller@98000008 { + compatible = "snps,dw-low-reset"; + reg = <0x98000008 0x4>; + #reset-cells = <1>; + }; + + reset4: reset-controller@98000050 { + compatible = "snps,dw-low-reset"; + reg = <0x98000050 0x4>; + #reset-cells = <1>; + }; + + iso_reset: reset-controller@98007088 { + compatible = "snps,dw-low-reset"; + reg = <0x98007088 0x4>; + #reset-cells = <1>; + }; + + wdt: watchdog@98007680 { + compatible = "realtek,rtd1295-watchdog"; + reg = <0x98007680 0x100>; + clocks = <&osc27M>; + }; + uart0: serial@98007800 { compatible = "snps,dw-apb-uart"; reg = <0x98007800 0x400>; reg-shift = <2>; reg-io-width = <4>; clock-frequency = <27000000>; + resets = <&iso_reset RTD1295_ISO_RSTN_UR0>; status = "disabled"; }; @@ -46,6 +90,7 @@ reg-shift = <2>; reg-io-width = <4>; clock-frequency = <432000000>; + resets = <&reset2 RTD1295_RSTN_UR1>; status = "disabled"; }; @@ -55,6 +100,7 @@ reg-shift = <2>; reg-io-width = <4>; clock-frequency = <432000000>; + resets = <&reset2 RTD1295_RSTN_UR2>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 42b74c283289..8fdbd2267384 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -1,6 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb +dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n.dtb +dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex.dtb dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb @@ -10,6 +12,10 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb +dtb-$(CONFIG_ARCH_R8A77960) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb +dtb-$(CONFIG_ARCH_R8A77960) += r8a7796-m3ulcb-kf.dtb +dtb-$(CONFIG_ARCH_R8A77960) += r8a7796-salvator-xs.dtb +dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-salvator-xs.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb r8a77965-salvator-xs.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-m3nulcb.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-m3nulcb-kf.dtb diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi index 3e376d29a730..2c942a7eaeeb 100644 --- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi @@ -86,7 +86,7 @@ label = "rcar-sound"; - dais = <&rsnd_port0>; + dais = <&rsnd_port>; }; vbus0_usb2: regulator-vbus0-usb2 { @@ -142,14 +142,6 @@ }; &du { - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&cpg CPG_MOD 722>, - <&versaclock5 1>, - <&x302_clk>, - <&versaclock5 2>; - clock-names = "du.0", "du.1", "du.2", - "dclkin.0", "dclkin.1", "dclkin.2"; status = "okay"; }; @@ -191,7 +183,7 @@ port@2 { reg = <2>; dw_hdmi0_snd_in: endpoint { - remote-endpoint = <&rsnd_endpoint0>; + remote-endpoint = <&rsnd_endpoint>; }; }; }; @@ -327,17 +319,15 @@ /* Single DAI */ #sound-dai-cells = <0>; - ports { - rsnd_port0: port@0 { - rsnd_endpoint0: endpoint { - remote-endpoint = <&dw_hdmi0_snd_in>; + rsnd_port: port { + rsnd_endpoint: endpoint { + remote-endpoint = <&dw_hdmi0_snd_in>; - dai-format = "i2s"; - bitclock-master = <&rsnd_endpoint0>; - frame-master = <&rsnd_endpoint0>; + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint>; + frame-master = <&rsnd_endpoint>; - playback = <&ssi2>; - }; + playback = <&ssi2>; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi index 4280b190dc68..28fe17e3bc4e 100644 --- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi @@ -13,6 +13,14 @@ chosen { bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 50000>; + + brightness-levels = <0 2 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; }; &avb { @@ -43,11 +51,36 @@ status = "okay"; }; -&pciec0 { - status = "okay"; +&gpio1 { + /* + * When GP1_20 is LOW LVDS0 is connected to the LVDS connector + * When GP1_20 is HIGH LVDS0 is connected to the LT8918L + */ + lvds-connector-en-gpio { + gpio-hog; + gpios = <20 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "lvds-connector-en-gpio"; + }; +}; + +&lvds0 { + /* + * Please include the LVDS panel .dtsi file and uncomment the below line + * to enable LVDS panel connected to RZ/G2[MN] boards. + */ + + /* status = "okay"; */ + + ports { + port@1 { + lvds_connector: endpoint { + }; + }; + }; }; -&pciec1 { +&pciec0 { status = "okay"; }; @@ -82,4 +115,16 @@ groups = "can1_data"; function = "can1"; }; + + pwm0_pins: pwm0 { + groups = "pwm0"; + function = "pwm0"; + }; +}; + +&pwm0 { + pinctrl-0 = <&pwm0_pins>; + pinctrl-names = "default"; + + status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts index 6e33a3b27706..c754fca239d9 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts +++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts @@ -13,3 +13,7 @@ compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2m", "renesas,r8a774a1"; }; + +&pciec1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts index 93ca973c856c..96f2fb080a1a 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts +++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts @@ -24,3 +24,14 @@ reg = <0x6 0x00000000 0x0 0x80000000>; }; }; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&versaclock5 1>, + <&x302_clk>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.2", + "dclkin.0", "dclkin.1", "dclkin.2"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index 06c7c849c8ab..34a9f472fbb4 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -1726,17 +1726,6 @@ "ssi.1", "ssi.0"; status = "disabled"; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - }; - port@1 { - reg = <1>; - }; - }; - rcar_sound,ctu { ctu00: ctu-0 { }; ctu01: ctu-1 { }; @@ -2651,7 +2640,7 @@ clock-names = "du.0", "du.1", "du.2"; status = "disabled"; - vsps = <&vspd0 &vspd1 &vspd2>; + vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>; ports { #address-cells = <1>; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts new file mode 100644 index 000000000000..ab47c0bd9c19 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2N sub board + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +#include "r8a774b1-hihope-rzg2n.dts" +#include "hihope-rzg2-ex.dtsi" + +/ { + model = "HopeRun HiHope RZ/G2N with sub board"; + compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2n", + "renesas,r8a774b1"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts new file mode 100644 index 000000000000..9910c1aa0a61 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2N main board + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a774b1.dtsi" +#include "hihope-common.dtsi" + +/ { + model = "HopeRun HiHope RZ/G2N main board based on r8a774b1"; + compatible = "hoperun,hihope-rzg2n", "renesas,r8a774b1"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@480000000 { + device_type = "memory"; + reg = <0x4 0x80000000 0x0 0x80000000>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 721>, + <&versaclock5 1>, + <&x302_clk>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.3", + "dclkin.0", "dclkin.1", "dclkin.3"; +}; + +&sdhi3 { + mmc-hs400-1_8v; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi new file mode 100644 index 000000000000..fe78387e4bb8 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi @@ -0,0 +1,2627 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the r8a774b1 SoC + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/r8a774b1-cpg-mssr.h> +#include <dt-bindings/power/r8a774b1-sysc.h> + +/ { + compatible = "renesas,r8a774b1"; + #address-cells = <2>; + #size-cells = <2>; + + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + cluster0_opp: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <830000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <830000>; + clock-latency-ns = <300000>; + }; + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <830000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + a57_0: cpu@0 { + compatible = "arm,cortex-a57"; + reg = <0x0>; + device_type = "cpu"; + power-domains = <&sysc R8A774B1_PD_CA57_CPU0>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + #cooling-cells = <2>; + dynamic-power-coefficient = <854>; + clocks = <&cpg CPG_CORE R8A774B1_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + }; + + a57_1: cpu@1 { + compatible = "arm,cortex-a57"; + reg = <0x1>; + device_type = "cpu"; + power-domains = <&sysc R8A774B1_PD_CA57_CPU1>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + clocks = <&cpg CPG_CORE R8A774B1_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + }; + + L2_CA57: cache-controller-0 { + compatible = "cache"; + power-domains = <&sysc R8A774B1_PD_CA57_SCU>; + cache-unified; + cache-level = <2>; + }; + }; + + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + extalr_clk: extalr { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + pmu_a57 { + compatible = "arm,cortex-a57-pmu"; + interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a57_0>, <&a57_1>; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a774b1-wdt", + "renesas,rcar-gen3-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 402>; + status = "disabled"; + }; + + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a774b1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 16>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 912>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a774b1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 29>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 911>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a774b1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 15>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 910>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a774b1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 16>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 909>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a774b1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 18>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 908>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a774b1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 907>; + }; + + gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a774b1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055400 0 0x50>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 906>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 906>; + }; + + gpio7: gpio@e6055800 { + compatible = "renesas,gpio-r8a774b1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055800 0 0x50>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 224 4>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 905>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 905>; + }; + + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a774b1"; + reg = <0 0xe6060000 0 0x50c>; + }; + + cmt0: timer@e60f0000 { + compatible = "renesas,r8a774b1-cmt0", + "renesas,rcar-gen3-cmt0"; + reg = <0 0xe60f0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 303>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 303>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a774b1-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 302>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 302>; + status = "disabled"; + }; + + cmt2: timer@e6140000 { + compatible = "renesas,r8a774b1-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6140000 0 0x1004>; + interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 301>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 301>; + status = "disabled"; + }; + + cmt3: timer@e6148000 { + compatible = "renesas,r8a774b1-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6148000 0 0x1004>; + interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 300>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 300>; + status = "disabled"; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a774b1-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&extalr_clk>; + clock-names = "extal", "extalr"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a774b1-rst"; + reg = <0 0xe6160000 0 0x0200>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a774b1-sysc"; + reg = <0 0xe6180000 0 0x0400>; + #power-domain-cells = <1>; + }; + + tsc: thermal@e6198000 { + compatible = "renesas,r8a774b1-thermal"; + reg = <0 0xe6198000 0 0x100>, + <0 0xe61a0000 0 0x100>, + <0 0xe61a8000 0 0x100>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <1>; + }; + + intc_ex: interrupt-controller@e61c0000 { + compatible = "renesas,intc-ex-r8a774b1", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 407>; + }; + + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a774b1", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@e6fc0000 { + compatible = "renesas,tmu-r8a774b1", "renesas,tmu"; + reg = <0 0xe6fc0000 0 0x30>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + tmu2: timer@e6fd0000 { + compatible = "renesas,tmu-r8a774b1", "renesas,tmu"; + reg = <0 0xe6fd0000 0 0x30>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 123>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 123>; + status = "disabled"; + }; + + tmu3: timer@e6fe0000 { + compatible = "renesas,tmu-r8a774b1", "renesas,tmu"; + reg = <0 0xe6fe0000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu4: timer@ffc00000 { + compatible = "renesas,tmu-r8a774b1", "renesas,tmu"; + reg = <0 0xffc00000 0 0x30>; + interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + + i2c0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774b1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6500000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 931>; + dmas = <&dmac1 0x91>, <&dmac1 0x90>, + <&dmac2 0x91>, <&dmac2 0x90>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774b1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 930>; + dmas = <&dmac1 0x93>, <&dmac1 0x92>, + <&dmac2 0x93>, <&dmac2 0x92>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c2: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774b1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6510000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 929>; + dmas = <&dmac1 0x95>, <&dmac1 0x94>, + <&dmac2 0x95>, <&dmac2 0x94>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774b1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 928>; + dmas = <&dmac0 0x97>, <&dmac0 0x96>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c4: i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774b1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d8000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 927>; + dmas = <&dmac0 0x99>, <&dmac0 0x98>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c5: i2c@e66e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774b1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e0000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 919>; + dmas = <&dmac0 0x9b>, <&dmac0 0x9a>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c6: i2c@e66e8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774b1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e8000 0 0x40>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 918>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 918>; + dmas = <&dmac0 0x9d>, <&dmac0 0x9c>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c_dvfs: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a774b1", + "renesas,rcar-gen3-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 926>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 926>; + dmas = <&dmac0 0x11>, <&dmac0 0x10>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a774b1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6540000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 520>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>, + <&dmac2 0x31>, <&dmac2 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 520>; + status = "disabled"; + }; + + hscif1: serial@e6550000 { + compatible = "renesas,hscif-r8a774b1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6550000 0 0x60>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 519>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x33>, <&dmac1 0x32>, + <&dmac2 0x33>, <&dmac2 0x32>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 519>; + status = "disabled"; + }; + + hscif2: serial@e6560000 { + compatible = "renesas,hscif-r8a774b1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6560000 0 0x60>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 518>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x35>, <&dmac1 0x34>, + <&dmac2 0x35>, <&dmac2 0x34>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 518>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a774b1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66a0000 0 0x60>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x37>, <&dmac0 0x36>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 517>; + status = "disabled"; + }; + + hscif4: serial@e66b0000 { + compatible = "renesas,hscif-r8a774b1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66b0000 0 0x60>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 516>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x38>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 516>; + status = "disabled"; + }; + + hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a774b1", + "renesas,rcar-gen3-usbhs"; + reg = <0 0xe6590000 0 0x200>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>; + dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, + <&usb_dmac1 0>, <&usb_dmac1 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; + renesas,buswait = <11>; + phys = <&usb2_phy0 3>; + phy-names = "usb"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 704>, <&cpg 703>; + status = "disabled"; + }; + + usb_dmac0: dma-controller@e65a0000 { + compatible = "renesas,r8a774b1-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 330>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 330>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac1: dma-controller@e65b0000 { + compatible = "renesas,r8a774b1-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 331>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb3_phy0: usb-phy@e65ee000 { + compatible = "renesas,r8a774b1-usb3-phy", + "renesas,rcar-gen3-usb3-phy"; + reg = <0 0xe65ee000 0 0x90>; + clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, + <&usb_extal_clk>; + clock-names = "usb3-if", "usb3s_clk", "usb_extal"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 328>; + #phy-cells = <0>; + status = "disabled"; + }; + + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a774b1", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x10000>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 219>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>, + <&ipmmu_ds0 2>, <&ipmmu_ds0 3>, + <&ipmmu_ds0 4>, <&ipmmu_ds0 5>, + <&ipmmu_ds0 6>, <&ipmmu_ds0 7>, + <&ipmmu_ds0 8>, <&ipmmu_ds0 9>, + <&ipmmu_ds0 10>, <&ipmmu_ds0 11>, + <&ipmmu_ds0 12>, <&ipmmu_ds0 13>, + <&ipmmu_ds0 14>, <&ipmmu_ds0 15>; + }; + + dmac1: dma-controller@e7300000 { + compatible = "renesas,dmac-r8a774b1", + "renesas,rcar-dmac"; + reg = <0 0xe7300000 0 0x10000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>, + <&ipmmu_ds1 2>, <&ipmmu_ds1 3>, + <&ipmmu_ds1 4>, <&ipmmu_ds1 5>, + <&ipmmu_ds1 6>, <&ipmmu_ds1 7>, + <&ipmmu_ds1 8>, <&ipmmu_ds1 9>, + <&ipmmu_ds1 10>, <&ipmmu_ds1 11>, + <&ipmmu_ds1 12>, <&ipmmu_ds1 13>, + <&ipmmu_ds1 14>, <&ipmmu_ds1 15>; + }; + + dmac2: dma-controller@e7310000 { + compatible = "renesas,dmac-r8a774b1", + "renesas,rcar-dmac"; + reg = <0 0xe7310000 0 0x10000>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 217>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 217>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>, + <&ipmmu_ds1 18>, <&ipmmu_ds1 19>, + <&ipmmu_ds1 20>, <&ipmmu_ds1 21>, + <&ipmmu_ds1 22>, <&ipmmu_ds1 23>, + <&ipmmu_ds1 24>, <&ipmmu_ds1 25>, + <&ipmmu_ds1 26>, <&ipmmu_ds1 27>, + <&ipmmu_ds1 28>, <&ipmmu_ds1 29>, + <&ipmmu_ds1 30>, <&ipmmu_ds1 31>; + }; + + ipmmu_ds0: mmu@e6740000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xe6740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ds1: mmu@e7740000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 1>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_hc: mmu@e6570000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xe6570000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 2>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mm: mmu@e67b0000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mp: mmu@ec670000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xec670000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 4>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_pv0: mmu@fd800000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xfd800000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 6>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vc0: mmu@fe6b0000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xfe6b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 12>; + power-domains = <&sysc R8A774B1_PD_A3VC>; + #iommu-cells = <1>; + }; + + ipmmu_vi0: mmu@febd0000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 14>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vp0: mmu@fe990000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xfe990000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 16>; + power-domains = <&sysc R8A774B1_PD_A3VP>; + #iommu-cells = <1>; + }; + + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a774b1", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6800000 0 0x800>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 812>; + phy-mode = "rgmii"; + iommus = <&ipmmu_ds0 16>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + can0: can@e6c30000 { + compatible = "renesas,can-r8a774b1", + "renesas,rcar-gen3-can"; + reg = <0 0xe6c30000 0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>, + <&cpg CPG_CORE R8A774B1_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774B1_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 916>; + status = "disabled"; + }; + + can1: can@e6c38000 { + compatible = "renesas,can-r8a774b1", + "renesas,rcar-gen3-can"; + reg = <0 0xe6c38000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>, + <&cpg CPG_CORE R8A774B1_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774B1_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 915>; + status = "disabled"; + }; + + canfd: can@e66c0000 { + compatible = "renesas,r8a774b1-canfd", + "renesas,rcar-gen3-canfd"; + reg = <0 0xe66c0000 0 0x8000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 914>, + <&cpg CPG_CORE R8A774B1_CLK_CANFD>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774B1_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 914>; + status = "disabled"; + + channel0 { + status = "disabled"; + }; + + channel1 { + status = "disabled"; + }; + }; + + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pwm5: pwm@e6e35000 { + compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar"; + reg = <0 0xe6e35000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pwm6: pwm@e6e36000 { + compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar"; + reg = <0 0xe6e36000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a774b1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 0x40>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x51>, <&dmac1 0x50>, + <&dmac2 0x51>, <&dmac2 0x50>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 207>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a774b1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 0x40>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x53>, <&dmac1 0x52>, + <&dmac2 0x53>, <&dmac2 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 206>; + status = "disabled"; + }; + + scif2: serial@e6e88000 { + compatible = "renesas,scif-r8a774b1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e88000 0 0x40>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 310>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x13>, <&dmac1 0x12>, + <&dmac2 0x13>, <&dmac2 0x12>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 310>; + status = "disabled"; + }; + + scif3: serial@e6c50000 { + compatible = "renesas,scif-r8a774b1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c50000 0 0x40>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x57>, <&dmac0 0x56>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 204>; + status = "disabled"; + }; + + scif4: serial@e6c40000 { + compatible = "renesas,scif-r8a774b1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c40000 0 0x40>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x59>, <&dmac0 0x58>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 203>; + status = "disabled"; + }; + + scif5: serial@e6f30000 { + compatible = "renesas,scif-r8a774b1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6f30000 0 0x40>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 202>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x5b>, <&dmac1 0x5a>, + <&dmac2 0x5b>, <&dmac2 0x5a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 202>; + status = "disabled"; + }; + + msiof0: spi@e6e90000 { + compatible = "renesas,msiof-r8a774b1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6e90000 0 0x0064>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 211>; + dmas = <&dmac1 0x41>, <&dmac1 0x40>, + <&dmac2 0x41>, <&dmac2 0x40>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 211>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6ea0000 { + compatible = "renesas,msiof-r8a774b1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6ea0000 0 0x0064>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 210>; + dmas = <&dmac1 0x43>, <&dmac1 0x42>, + <&dmac2 0x43>, <&dmac2 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 210>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6c00000 { + compatible = "renesas,msiof-r8a774b1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c00000 0 0x0064>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 209>; + dmas = <&dmac0 0x45>, <&dmac0 0x44>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 209>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof3: spi@e6c10000 { + compatible = "renesas,msiof-r8a774b1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c10000 0 0x0064>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x47>, <&dmac0 0x46>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 208>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a774b1"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 811>; + renesas,id = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin0csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin0>; + }; + vin0csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin0>; + }; + }; + }; + }; + + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a774b1"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 810>; + renesas,id = <1>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin1csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin1>; + }; + vin1csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin1>; + }; + }; + }; + }; + + vin2: video@e6ef2000 { + compatible = "renesas,vin-r8a774b1"; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 809>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 809>; + renesas,id = <2>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin2csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin2>; + }; + vin2csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin2>; + }; + }; + }; + }; + + vin3: video@e6ef3000 { + compatible = "renesas,vin-r8a774b1"; + reg = <0 0xe6ef3000 0 0x1000>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 808>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 808>; + renesas,id = <3>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin3csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin3>; + }; + vin3csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin3>; + }; + }; + }; + }; + + vin4: video@e6ef4000 { + compatible = "renesas,vin-r8a774b1"; + reg = <0 0xe6ef4000 0 0x1000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 807>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 807>; + renesas,id = <4>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin4csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin4>; + }; + vin4csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin4>; + }; + }; + }; + }; + + vin5: video@e6ef5000 { + compatible = "renesas,vin-r8a774b1"; + reg = <0 0xe6ef5000 0 0x1000>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 806>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 806>; + renesas,id = <5>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin5csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin5>; + }; + vin5csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin5>; + }; + }; + }; + }; + + vin6: video@e6ef6000 { + compatible = "renesas,vin-r8a774b1"; + reg = <0 0xe6ef6000 0 0x1000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 805>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 805>; + renesas,id = <6>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin6csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin6>; + }; + vin6csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin6>; + }; + }; + }; + }; + + vin7: video@e6ef7000 { + compatible = "renesas,vin-r8a774b1"; + reg = <0 0xe6ef7000 0 0x1000>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 804>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 804>; + renesas,id = <7>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin7csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin7>; + }; + vin7csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin7>; + }; + }; + }; + }; + + rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + /* + * #clock-cells is required for audio_clkout0/1/2/3 + * + * clkout : #clock-cells = <0>; <&rcar_sound>; + * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a774b1", "renesas,rcar_sound-gen3"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, + <&audio_clk_c>, + <&cpg CPG_CORE R8A774B1_CLK_S0D4>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", + "src.5", "src.4", "src.3", "src.2", + "src.1", "src.0", + "mix.1", "mix.0", + "ctu.1", "ctu.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, + <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, + <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0"; + status = "disabled"; + + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + + rcar_sound,dvc { + dvc0: dvc-0 { + dmas = <&audma1 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc-1 { + dmas = <&audma1 0xbe>; + dma-names = "tx"; + }; + }; + + rcar_sound,mix { + mix0: mix-0 { }; + mix1: mix-1 { }; + }; + + rcar_sound,src { + src0: src-0 { + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x85>, <&audma1 0x9a>; + dma-names = "rx", "tx"; + }; + src1: src-1 { + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma1 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src-2 { + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma1 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src-3 { + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma1 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src-4 { + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma1 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src-5 { + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma1 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src-6 { + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma1 0xb4>; + dma-names = "rx", "tx"; + }; + src7: src-7 { + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x93>, <&audma1 0xb6>; + dma-names = "rx", "tx"; + }; + src8: src-8 { + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x95>, <&audma1 0xb8>; + dma-names = "rx", "tx"; + }; + src9: src-9 { + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x97>, <&audma1 0xba>; + dma-names = "rx", "tx"; + }; + }; + + rcar_sound,ssi { + ssi0: ssi-0 { + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma1 0x02>; + dma-names = "rx", "tx"; + }; + ssi1: ssi-1 { + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma1 0x04>; + dma-names = "rx", "tx"; + }; + ssi2: ssi-2 { + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma1 0x06>; + dma-names = "rx", "tx"; + }; + ssi3: ssi-3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma1 0x08>; + dma-names = "rx", "tx"; + }; + ssi4: ssi-4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma1 0x0a>; + dma-names = "rx", "tx"; + }; + ssi5: ssi-5 { + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma1 0x0c>; + dma-names = "rx", "tx"; + }; + ssi6: ssi-6 { + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma1 0x0e>; + dma-names = "rx", "tx"; + }; + ssi7: ssi-7 { + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma1 0x10>; + dma-names = "rx", "tx"; + }; + ssi8: ssi-8 { + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma1 0x12>; + dma-names = "rx", "tx"; + }; + ssi9: ssi-9 { + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma1 0x14>; + dma-names = "rx", "tx"; + }; + }; + + rcar_sound,ssiu { + ssiu00: ssiu-0 { + dmas = <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx"; + }; + ssiu01: ssiu-1 { + dmas = <&audma0 0x35>, <&audma1 0x36>; + dma-names = "rx", "tx"; + }; + ssiu02: ssiu-2 { + dmas = <&audma0 0x37>, <&audma1 0x38>; + dma-names = "rx", "tx"; + }; + ssiu03: ssiu-3 { + dmas = <&audma0 0x47>, <&audma1 0x48>; + dma-names = "rx", "tx"; + }; + ssiu04: ssiu-4 { + dmas = <&audma0 0x3F>, <&audma1 0x40>; + dma-names = "rx", "tx"; + }; + ssiu05: ssiu-5 { + dmas = <&audma0 0x43>, <&audma1 0x44>; + dma-names = "rx", "tx"; + }; + ssiu06: ssiu-6 { + dmas = <&audma0 0x4F>, <&audma1 0x50>; + dma-names = "rx", "tx"; + }; + ssiu07: ssiu-7 { + dmas = <&audma0 0x53>, <&audma1 0x54>; + dma-names = "rx", "tx"; + }; + ssiu10: ssiu-8 { + dmas = <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx"; + }; + ssiu11: ssiu-9 { + dmas = <&audma0 0x4B>, <&audma1 0x4C>; + dma-names = "rx", "tx"; + }; + ssiu12: ssiu-10 { + dmas = <&audma0 0x57>, <&audma1 0x58>; + dma-names = "rx", "tx"; + }; + ssiu13: ssiu-11 { + dmas = <&audma0 0x59>, <&audma1 0x5A>; + dma-names = "rx", "tx"; + }; + ssiu14: ssiu-12 { + dmas = <&audma0 0x5F>, <&audma1 0x60>; + dma-names = "rx", "tx"; + }; + ssiu15: ssiu-13 { + dmas = <&audma0 0xC3>, <&audma1 0xC4>; + dma-names = "rx", "tx"; + }; + ssiu16: ssiu-14 { + dmas = <&audma0 0xC7>, <&audma1 0xC8>; + dma-names = "rx", "tx"; + }; + ssiu17: ssiu-15 { + dmas = <&audma0 0xCB>, <&audma1 0xCC>; + dma-names = "rx", "tx"; + }; + ssiu20: ssiu-16 { + dmas = <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx"; + }; + ssiu21: ssiu-17 { + dmas = <&audma0 0x67>, <&audma1 0x68>; + dma-names = "rx", "tx"; + }; + ssiu22: ssiu-18 { + dmas = <&audma0 0x6B>, <&audma1 0x6C>; + dma-names = "rx", "tx"; + }; + ssiu23: ssiu-19 { + dmas = <&audma0 0x6D>, <&audma1 0x6E>; + dma-names = "rx", "tx"; + }; + ssiu24: ssiu-20 { + dmas = <&audma0 0xCF>, <&audma1 0xCE>; + dma-names = "rx", "tx"; + }; + ssiu25: ssiu-21 { + dmas = <&audma0 0xEB>, <&audma1 0xEC>; + dma-names = "rx", "tx"; + }; + ssiu26: ssiu-22 { + dmas = <&audma0 0xED>, <&audma1 0xEE>; + dma-names = "rx", "tx"; + }; + ssiu27: ssiu-23 { + dmas = <&audma0 0xEF>, <&audma1 0xF0>; + dma-names = "rx", "tx"; + }; + ssiu30: ssiu-24 { + dmas = <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx"; + }; + ssiu31: ssiu-25 { + dmas = <&audma0 0x21>, <&audma1 0x22>; + dma-names = "rx", "tx"; + }; + ssiu32: ssiu-26 { + dmas = <&audma0 0x23>, <&audma1 0x24>; + dma-names = "rx", "tx"; + }; + ssiu33: ssiu-27 { + dmas = <&audma0 0x25>, <&audma1 0x26>; + dma-names = "rx", "tx"; + }; + ssiu34: ssiu-28 { + dmas = <&audma0 0x27>, <&audma1 0x28>; + dma-names = "rx", "tx"; + }; + ssiu35: ssiu-29 { + dmas = <&audma0 0x29>, <&audma1 0x2A>; + dma-names = "rx", "tx"; + }; + ssiu36: ssiu-30 { + dmas = <&audma0 0x2B>, <&audma1 0x2C>; + dma-names = "rx", "tx"; + }; + ssiu37: ssiu-31 { + dmas = <&audma0 0x2D>, <&audma1 0x2E>; + dma-names = "rx", "tx"; + }; + ssiu40: ssiu-32 { + dmas = <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx"; + }; + ssiu41: ssiu-33 { + dmas = <&audma0 0x17>, <&audma1 0x18>; + dma-names = "rx", "tx"; + }; + ssiu42: ssiu-34 { + dmas = <&audma0 0x19>, <&audma1 0x1A>; + dma-names = "rx", "tx"; + }; + ssiu43: ssiu-35 { + dmas = <&audma0 0x1B>, <&audma1 0x1C>; + dma-names = "rx", "tx"; + }; + ssiu44: ssiu-36 { + dmas = <&audma0 0x1D>, <&audma1 0x1E>; + dma-names = "rx", "tx"; + }; + ssiu45: ssiu-37 { + dmas = <&audma0 0x1F>, <&audma1 0x20>; + dma-names = "rx", "tx"; + }; + ssiu46: ssiu-38 { + dmas = <&audma0 0x31>, <&audma1 0x32>; + dma-names = "rx", "tx"; + }; + ssiu47: ssiu-39 { + dmas = <&audma0 0x33>, <&audma1 0x34>; + dma-names = "rx", "tx"; + }; + ssiu50: ssiu-40 { + dmas = <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx"; + }; + ssiu60: ssiu-41 { + dmas = <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx"; + }; + ssiu70: ssiu-42 { + dmas = <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx"; + }; + ssiu80: ssiu-43 { + dmas = <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx"; + }; + ssiu90: ssiu-44 { + dmas = <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx"; + }; + ssiu91: ssiu-45 { + dmas = <&audma0 0x7F>, <&audma1 0x80>; + dma-names = "rx", "tx"; + }; + ssiu92: ssiu-46 { + dmas = <&audma0 0x81>, <&audma1 0x82>; + dma-names = "rx", "tx"; + }; + ssiu93: ssiu-47 { + dmas = <&audma0 0x83>, <&audma1 0x84>; + dma-names = "rx", "tx"; + }; + ssiu94: ssiu-48 { + dmas = <&audma0 0xA3>, <&audma1 0xA4>; + dma-names = "rx", "tx"; + }; + ssiu95: ssiu-49 { + dmas = <&audma0 0xA5>, <&audma1 0xA6>; + dma-names = "rx", "tx"; + }; + ssiu96: ssiu-50 { + dmas = <&audma0 0xA7>, <&audma1 0xA8>; + dma-names = "rx", "tx"; + }; + ssiu97: ssiu-51 { + dmas = <&audma0 0xA9>, <&audma1 0xAA>; + dma-names = "rx", "tx"; + }; + }; + }; + + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a774b1", + "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 502>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 502>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + audma1: dma-controller@ec720000 { + compatible = "renesas,dmac-r8a774b1", + "renesas,rcar-dmac"; + reg = <0 0xec720000 0 0x10000>; + interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 501>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 501>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + xhci0: usb@ee000000 { + compatible = "renesas,xhci-r8a774b1", + "renesas,rcar-gen3-xhci"; + reg = <0 0xee000000 0 0xc00>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 328>; + status = "disabled"; + }; + + usb3_peri0: usb@ee020000 { + compatible = "renesas,r8a774b1-usb3-peri", + "renesas,rcar-gen3-usb3-peri"; + reg = <0 0xee020000 0 0x400>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 328>; + status = "disabled"; + }; + + ohci0: usb@ee080000 { + compatible = "generic-ohci"; + reg = <0 0xee080000 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + phys = <&usb2_phy0 1>; + phy-names = "usb"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + status = "disabled"; + }; + + ohci1: usb@ee0a0000 { + compatible = "generic-ohci"; + reg = <0 0xee0a0000 0 0x100>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 702>; + phys = <&usb2_phy1 1>; + phy-names = "usb"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 702>; + status = "disabled"; + }; + + ehci0: usb@ee080100 { + compatible = "generic-ehci"; + reg = <0 0xee080100 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + phys = <&usb2_phy0 2>; + phy-names = "usb"; + companion = <&ohci0>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + status = "disabled"; + }; + + ehci1: usb@ee0a0100 { + compatible = "generic-ehci"; + reg = <0 0xee0a0100 0 0x100>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 702>; + phys = <&usb2_phy1 2>; + phy-names = "usb"; + companion = <&ohci1>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 702>; + status = "disabled"; + }; + + usb2_phy0: usb-phy@ee080200 { + compatible = "renesas,usb2-phy-r8a774b1", + "renesas,rcar-gen3-usb2-phy"; + reg = <0 0xee080200 0 0x700>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + #phy-cells = <1>; + status = "disabled"; + }; + + usb2_phy1: usb-phy@ee0a0200 { + compatible = "renesas,usb2-phy-r8a774b1", + "renesas,rcar-gen3-usb2-phy"; + reg = <0 0xee0a0200 0 0x700>; + clocks = <&cpg CPG_MOD 702>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 702>; + #phy-cells = <1>; + status = "disabled"; + }; + + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a774b1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee100000 0 0x2000>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + max-frequency = <200000000>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 314>; + status = "disabled"; + }; + + sdhi1: sd@ee120000 { + compatible = "renesas,sdhi-r8a774b1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee120000 0 0x2000>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 313>; + max-frequency = <200000000>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 313>; + status = "disabled"; + }; + + sdhi2: sd@ee140000 { + compatible = "renesas,sdhi-r8a774b1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee140000 0 0x2000>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + max-frequency = <200000000>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 312>; + status = "disabled"; + }; + + sdhi3: sd@ee160000 { + compatible = "renesas,sdhi-r8a774b1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee160000 0 0x2000>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 311>; + max-frequency = <200000000>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 311>; + status = "disabled"; + }; + + sata: sata@ee300000 { + compatible = "renesas,sata-r8a774b1", + "renesas,rcar-gen3-sata"; + reg = <0 0xee300000 0 0x200000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 815>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 815>; + status = "disabled"; + }; + + gic: interrupt-controller@f1010000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xf1010000 0 0x1000>, + <0x0 0xf1020000 0 0x20000>, + <0x0 0xf1040000 0 0x20000>, + <0x0 0xf1060000 0 0x20000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 408>; + }; + + pciec0: pcie@fe000000 { + compatible = "renesas,pcie-r8a774b1", + "renesas,pcie-rcar-gen3"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 319>; + status = "disabled"; + }; + + pciec1: pcie@ee800000 { + compatible = "renesas,pcie-r8a774b1", + "renesas,pcie-rcar-gen3"; + reg = <0 0xee800000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000 + 0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000 + 0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000 + 0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 318>; + status = "disabled"; + }; + + fdp1@fe940000 { + compatible = "renesas,fdp1"; + reg = <0 0xfe940000 0 0x2400>; + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 119>; + power-domains = <&sysc R8A774B1_PD_A3VP>; + resets = <&cpg 119>; + renesas,fcp = <&fcpf0>; + }; + + fcpf0: fcp@fe950000 { + compatible = "renesas,fcpf"; + reg = <0 0xfe950000 0 0x200>; + clocks = <&cpg CPG_MOD 615>; + power-domains = <&sysc R8A774B1_PD_A3VP>; + resets = <&cpg 615>; + }; + + vspb: vsp@fe960000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe960000 0 0x8000>; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 626>; + power-domains = <&sysc R8A774B1_PD_A3VP>; + resets = <&cpg 626>; + + renesas,fcp = <&fcpvb0>; + }; + + vspi0: vsp@fe9a0000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe9a0000 0 0x8000>; + interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 631>; + power-domains = <&sysc R8A774B1_PD_A3VP>; + resets = <&cpg 631>; + + renesas,fcp = <&fcpvi0>; + }; + + vspd0: vsp@fea20000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea20000 0 0x5000>; + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 623>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 623>; + + renesas,fcp = <&fcpvd0>; + }; + + vspd1: vsp@fea28000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea28000 0 0x5000>; + interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 622>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 622>; + + renesas,fcp = <&fcpvd1>; + }; + + fcpvb0: fcp@fe96f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe96f000 0 0x200>; + clocks = <&cpg CPG_MOD 607>; + power-domains = <&sysc R8A774B1_PD_A3VP>; + resets = <&cpg 607>; + }; + + fcpvd0: fcp@fea27000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea27000 0 0x200>; + clocks = <&cpg CPG_MOD 603>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 603>; + }; + + fcpvd1: fcp@fea2f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea2f000 0 0x200>; + clocks = <&cpg CPG_MOD 602>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 602>; + }; + + fcpvi0: fcp@fe9af000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe9af000 0 0x200>; + clocks = <&cpg CPG_MOD 611>; + power-domains = <&sysc R8A774B1_PD_A3VP>; + resets = <&cpg 611>; + }; + + csi20: csi2@fea80000 { + compatible = "renesas,r8a774b1-csi2"; + reg = <0 0xfea80000 0 0x10000>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 714>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 714>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi20vin0: endpoint@0 { + reg = <0>; + remote-endpoint = <&vin0csi20>; + }; + csi20vin1: endpoint@1 { + reg = <1>; + remote-endpoint = <&vin1csi20>; + }; + csi20vin2: endpoint@2 { + reg = <2>; + remote-endpoint = <&vin2csi20>; + }; + csi20vin3: endpoint@3 { + reg = <3>; + remote-endpoint = <&vin3csi20>; + }; + csi20vin4: endpoint@4 { + reg = <4>; + remote-endpoint = <&vin4csi20>; + }; + csi20vin5: endpoint@5 { + reg = <5>; + remote-endpoint = <&vin5csi20>; + }; + csi20vin6: endpoint@6 { + reg = <6>; + remote-endpoint = <&vin6csi20>; + }; + csi20vin7: endpoint@7 { + reg = <7>; + remote-endpoint = <&vin7csi20>; + }; + }; + }; + }; + + csi40: csi2@feaa0000 { + compatible = "renesas,r8a774b1-csi2"; + reg = <0 0xfeaa0000 0 0x10000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi40vin0: endpoint@0 { + reg = <0>; + remote-endpoint = <&vin0csi40>; + }; + csi40vin1: endpoint@1 { + reg = <1>; + remote-endpoint = <&vin1csi40>; + }; + csi40vin2: endpoint@2 { + reg = <2>; + remote-endpoint = <&vin2csi40>; + }; + csi40vin3: endpoint@3 { + reg = <3>; + remote-endpoint = <&vin3csi40>; + }; + csi40vin4: endpoint@4 { + reg = <4>; + remote-endpoint = <&vin4csi40>; + }; + csi40vin5: endpoint@5 { + reg = <5>; + remote-endpoint = <&vin5csi40>; + }; + csi40vin6: endpoint@6 { + reg = <6>; + remote-endpoint = <&vin6csi40>; + }; + csi40vin7: endpoint@7 { + reg = <7>; + remote-endpoint = <&vin7csi40>; + }; + }; + }; + }; + + hdmi0: hdmi@fead0000 { + compatible = "renesas,r8a774b1-hdmi", + "renesas,rcar-gen3-hdmi"; + reg = <0 0xfead0000 0 0x10000>; + interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 729>, + <&cpg CPG_CORE R8A774B1_CLK_HDMI>; + clock-names = "iahb", "isfr"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 729>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dw_hdmi0_in: endpoint { + remote-endpoint = <&du_out_hdmi0>; + }; + }; + port@1 { + reg = <1>; + }; + port@2 { + /* HDMI sound */ + reg = <2>; + }; + }; + }; + + du: display@feb00000 { + compatible = "renesas,du-r8a774b1"; + reg = <0 0xfeb00000 0 0x80000>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 721>; + clock-names = "du.0", "du.1", "du.3"; + status = "disabled"; + + vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_hdmi0: endpoint { + remote-endpoint = <&dw_hdmi0_in>; + }; + }; + port@2 { + reg = <2>; + du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + }; + }; + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a774b1-lvds"; + reg = <0 0xfeb90000 0 0x14>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 727>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { + }; + }; + }; + }; + + prr: chipid@fff00044 { + compatible = "renesas,prr"; + reg = <0 0xfff00044 0 4>; + }; + }; + + thermal-zones { + sensor_thermal1: sensor-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 0>; + sustainable-power = <2439>; + + trips { + sensor1_crit: sensor1-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + sensor_thermal2: sensor-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 1>; + sustainable-power = <2439>; + + trips { + sensor2_crit: sensor2-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + sensor_thermal3: sensor-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 2>; + sustainable-power = <2439>; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&a57_0 0 2>; + contribution = <1024>; + }; + }; + trips { + target: trip-point1 { + temperature = <100000>; + hysteresis = <1000>; + type = "passive"; + }; + + sensor3_crit: sensor3-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + /* External USB clocks - can be overridden by the board */ + usb3s0_clk: usb3s0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index a1c2de90e470..c7bdc3606323 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -73,9 +73,11 @@ compatible = "arm,cortex-a53"; reg = <0>; device_type = "cpu"; + #cooling-cells = <2>; power-domains = <&sysc R8A774C0_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + dynamic-power-coefficient = <277>; clocks = <&cpg CPG_CORE R8A774C0_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -1905,18 +1907,30 @@ thermal-zones { cpu-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&thermal>; + polling-delay = <0>; + thermal-sensors = <&thermal 0>; + sustainable-power = <717>; cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&a53_0 0 2>; + contribution = <1024>; + }; }; trips { - cpu-crit { + sensor1_crit: sensor1-crit { temperature = <120000>; hysteresis = <2000>; type = "critical"; }; + + target: trip-point1 { + temperature = <100000>; + hysteresis = <2000>; + type = "passive"; + }; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi index e4650ae5b75a..14d8513d2a47 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi @@ -30,7 +30,7 @@ }; &du { - vsps = <&vspd0 &vspd1 &vspd2 &vspd3>; + vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd3 0>; }; &fcpvb1 { diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index 95deff66eeb6..fde6ec122d3b 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -155,6 +155,7 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; dynamic-power-coefficient = <854>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; @@ -169,6 +170,7 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU1>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; capacity-dmips-mhz = <1024>; @@ -182,6 +184,7 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU2>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; capacity-dmips-mhz = <1024>; @@ -195,6 +198,7 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU3>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; capacity-dmips-mhz = <1024>; @@ -208,6 +212,7 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; #cooling-cells = <2>; dynamic-power-coefficient = <277>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; @@ -222,6 +227,7 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU1>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; @@ -234,6 +240,7 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU2>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; @@ -246,6 +253,7 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU3>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; @@ -264,6 +272,28 @@ cache-unified; cache-level = <2>; }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <400>; + exit-latency-us = <500>; + min-residency-us = <4000>; + }; + + CPU_SLEEP_1: cpu-sleep-1 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <700>; + exit-latency-us = <700>; + min-residency-us = <5000>; + }; + }; }; extal_clk: extal { @@ -2569,6 +2599,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 314>; + iommus = <&ipmmu_ds1 32>; status = "disabled"; }; @@ -2581,6 +2612,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 313>; + iommus = <&ipmmu_ds1 33>; status = "disabled"; }; @@ -2593,6 +2625,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 312>; + iommus = <&ipmmu_ds1 34>; status = "disabled"; }; @@ -2605,6 +2638,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 311>; + iommus = <&ipmmu_ds1 35>; status = "disabled"; }; @@ -2909,6 +2943,42 @@ iommus = <&ipmmu_vi1 10>; }; + cmm0: cmm@fea40000 { + compatible = "renesas,r8a7795-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea40000 0 0x1000>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 711>; + resets = <&cpg 711>; + }; + + cmm1: cmm@fea50000 { + compatible = "renesas,r8a7795-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea50000 0 0x1000>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 710>; + resets = <&cpg 710>; + }; + + cmm2: cmm@fea60000 { + compatible = "renesas,r8a7795-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea60000 0 0x1000>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 709>; + resets = <&cpg 709>; + }; + + cmm3: cmm@fea70000 { + compatible = "renesas,r8a7795-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea70000 0 0x1000>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 708>; + resets = <&cpg 708>; + }; + csi20: csi2@fea80000 { compatible = "renesas,r8a7795-csi2"; reg = <0 0xfea80000 0 0x10000>; @@ -3112,7 +3182,10 @@ <&cpg CPG_MOD 722>, <&cpg CPG_MOD 721>; clock-names = "du.0", "du.1", "du.2", "du.3"; + + renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>, <&cmm3>; vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>; + status = "disabled"; ports { diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index 3dc9d73f589a..b9db882b0351 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -160,6 +160,7 @@ power-domains = <&sysc R8A7796_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; dynamic-power-coefficient = <854>; clocks = <&cpg CPG_CORE R8A7796_CLK_Z>; operating-points-v2 = <&cluster0_opp>; @@ -174,6 +175,7 @@ power-domains = <&sysc R8A7796_PD_CA57_CPU1>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&cpg CPG_CORE R8A7796_CLK_Z>; operating-points-v2 = <&cluster0_opp>; capacity-dmips-mhz = <1024>; @@ -187,6 +189,7 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; #cooling-cells = <2>; dynamic-power-coefficient = <277>; clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; @@ -201,6 +204,7 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU1>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; @@ -213,6 +217,7 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU2>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; @@ -225,6 +230,7 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU3>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; @@ -243,6 +249,28 @@ cache-unified; cache-level = <2>; }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <400>; + exit-latency-us = <500>; + min-residency-us = <4000>; + }; + + CPU_SLEEP_1: cpu-sleep-1 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <700>; + exit-latency-us = <700>; + min-residency-us = <5000>; + }; + }; }; extal_clk: extal { @@ -2366,6 +2394,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 314>; + iommus = <&ipmmu_ds1 32>; status = "disabled"; }; @@ -2378,6 +2407,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 313>; + iommus = <&ipmmu_ds1 33>; status = "disabled"; }; @@ -2390,6 +2420,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 312>; + iommus = <&ipmmu_ds1 34>; status = "disabled"; }; @@ -2402,6 +2433,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 311>; + iommus = <&ipmmu_ds1 35>; status = "disabled"; }; @@ -2613,6 +2645,33 @@ renesas,fcp = <&fcpvi0>; }; + cmm0: cmm@fea40000 { + compatible = "renesas,r8a7796-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea40000 0 0x1000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 711>; + resets = <&cpg 711>; + }; + + cmm1: cmm@fea50000 { + compatible = "renesas,r8a7796-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea50000 0 0x1000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 710>; + resets = <&cpg 710>; + }; + + cmm2: cmm@fea60000 { + compatible = "renesas,r8a7796-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea60000 0 0x1000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 709>; + resets = <&cpg 709>; + }; + csi20: csi2@fea80000 { compatible = "renesas,r8a7796-csi2"; reg = <0 0xfea80000 0 0x10000>; @@ -2763,9 +2822,11 @@ <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>; clock-names = "du.0", "du.1", "du.2"; - status = "disabled"; - vsps = <&vspd0 &vspd1 &vspd2>; + renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>; + vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>; + + status = "disabled"; ports { #address-cells = <1>; diff --git a/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts new file mode 100644 index 000000000000..4abd78ac1cd5 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Salvator-X 2nd version board with R-Car M3-W+ + * + * Copyright (C) 2018 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a77961.dtsi" +#include "salvator-xs.dtsi" + +/ { + model = "Renesas Salvator-X 2nd version board based on r8a77961"; + compatible = "renesas,salvator-xs", "renesas,r8a77961"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@400000000 { + device_type = "memory"; + reg = <0x4 0x80000000 0x0 0x80000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x1 0x00000000>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi new file mode 100644 index 000000000000..64466c86b698 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi @@ -0,0 +1,723 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the R-Car M3-W+ (R8A77961) SoC + * + * Copyright (C) 2016-2017 Renesas Electronics Corp. + */ + +#include <dt-bindings/clock/r8a77961-cpg-mssr.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/r8a77961-sysc.h> + +#define CPG_AUDIO_CLK_I R8A77961_CLK_S0D4 + +/ { + compatible = "renesas,r8a77961"; + #address-cells = <2>; + #size-cells = <2>; + + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + cluster0_opp: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <900000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + opp-1700000000 { + opp-hz = /bits/ 64 <1700000000>; + opp-microvolt = <900000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <960000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + }; + + cluster1_opp: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&a57_0>; + }; + core1 { + cpu = <&a57_1>; + }; + }; + + cluster1 { + core0 { + cpu = <&a53_0>; + }; + core1 { + cpu = <&a53_1>; + }; + core2 { + cpu = <&a53_2>; + }; + core3 { + cpu = <&a53_3>; + }; + }; + }; + + a57_0: cpu@0 { + compatible = "arm,cortex-a57"; + reg = <0x0>; + device_type = "cpu"; + power-domains = <&sysc R8A77961_PD_CA57_CPU0>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + dynamic-power-coefficient = <854>; + clocks = <&cpg CPG_CORE R8A77961_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; + }; + + a57_1: cpu@1 { + compatible = "arm,cortex-a57"; + reg = <0x1>; + device_type = "cpu"; + power-domains = <&sysc R8A77961_PD_CA57_CPU1>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&cpg CPG_CORE R8A77961_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; + }; + + a53_0: cpu@100 { + compatible = "arm,cortex-a53"; + reg = <0x100>; + device_type = "cpu"; + power-domains = <&sysc R8A77961_PD_CA53_CPU0>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; + #cooling-cells = <2>; + dynamic-power-coefficient = <277>; + clocks = <&cpg CPG_CORE R8A77961_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <535>; + }; + + a53_1: cpu@101 { + compatible = "arm,cortex-a53"; + reg = <0x101>; + device_type = "cpu"; + power-domains = <&sysc R8A77961_PD_CA53_CPU1>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; + clocks = <&cpg CPG_CORE R8A77961_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <535>; + }; + + a53_2: cpu@102 { + compatible = "arm,cortex-a53"; + reg = <0x102>; + device_type = "cpu"; + power-domains = <&sysc R8A77961_PD_CA53_CPU2>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; + clocks = <&cpg CPG_CORE R8A77961_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <535>; + }; + + a53_3: cpu@103 { + compatible = "arm,cortex-a53"; + reg = <0x103>; + device_type = "cpu"; + power-domains = <&sysc R8A77961_PD_CA53_CPU3>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; + clocks = <&cpg CPG_CORE R8A77961_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <535>; + }; + + L2_CA57: cache-controller-0 { + compatible = "cache"; + power-domains = <&sysc R8A77961_PD_CA57_SCU>; + cache-unified; + cache-level = <2>; + }; + + L2_CA53: cache-controller-1 { + compatible = "cache"; + power-domains = <&sysc R8A77961_PD_CA53_SCU>; + cache-unified; + cache-level = <2>; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <400>; + exit-latency-us = <500>; + min-residency-us = <4000>; + }; + + CPU_SLEEP_1: cpu-sleep-1 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <700>; + exit-latency-us = <700>; + min-residency-us = <5000>; + }; + }; + }; + + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + extalr_clk: extalr { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>; + }; + + pmu_a57 { + compatible = "arm,cortex-a57-pmu"; + interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a57_0>, <&a57_1>; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + rwdt: watchdog@e6020000 { + reg = <0 0xe6020000 0 0x0c>; + /* placeholder */ + }; + + gpio2: gpio@e6052000 { + reg = <0 0xe6052000 0 0x50>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + /* placeholder */ + }; + + gpio3: gpio@e6053000 { + reg = <0 0xe6053000 0 0x50>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + /* placeholder */ + }; + + gpio4: gpio@e6054000 { + reg = <0 0xe6054000 0 0x50>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + /* placeholder */ + }; + + gpio5: gpio@e6055000 { + reg = <0 0xe6055000 0 0x50>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + /* placeholder */ + }; + + gpio6: gpio@e6055400 { + reg = <0 0xe6055400 0 0x50>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + /* placeholder */ + }; + + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a77961"; + reg = <0 0xe6060000 0 0x50c>; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a77961-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&extalr_clk>; + clock-names = "extal", "extalr"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a77961-rst"; + reg = <0 0xe6160000 0 0x0200>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a77961-sysc"; + reg = <0 0xe6180000 0 0x0400>; + #power-domain-cells = <1>; + }; + + intc_ex: interrupt-controller@e61c0000 { + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + /* placeholder */ + }; + + i2c2: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0xe6510000 0 0x40>; + /* placeholder */ + }; + + i2c4: i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0xe66d8000 0 0x40>; + /* placeholder */ + }; + + i2c_dvfs: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0xe60b0000 0 0x425>; + /* placeholder */ + }; + + hscif1: serial@e6550000 { + reg = <0 0xe6550000 0 0x60>; + /* placeholder */ + }; + + hsusb: usb@e6590000 { + reg = <0 0xe6590000 0 0x200>; + /* placeholder */ + }; + + usb3_phy0: usb-phy@e65ee000 { + reg = <0 0xe65ee000 0 0x90>; + #phy-cells = <0>; + /* placeholder */ + }; + + avb: ethernet@e6800000 { + reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + /* placeholder */ + }; + + pwm1: pwm@e6e31000 { + reg = <0 0xe6e31000 0 8>; + #pwm-cells = <2>; + /* placeholder */ + }; + + scif1: serial@e6e68000 { + reg = <0 0xe6e68000 0 64>; + /* placeholder */ + }; + + scif2: serial@e6e88000 { + compatible = "renesas,scif-r8a77961", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e88000 0 64>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 310>, + <&cpg CPG_CORE R8A77961_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 310>; + status = "disabled"; + }; + + vin0: video@e6ef0000 { + reg = <0 0xe6ef0000 0 0x1000>; + /* placeholder */ + }; + + vin1: video@e6ef1000 { + reg = <0 0xe6ef1000 0 0x1000>; + /* placeholder */ + }; + + vin2: video@e6ef2000 { + reg = <0 0xe6ef2000 0 0x1000>; + /* placeholder */ + }; + + vin3: video@e6ef3000 { + reg = <0 0xe6ef3000 0 0x1000>; + /* placeholder */ + }; + + vin4: video@e6ef4000 { + reg = <0 0xe6ef4000 0 0x1000>; + /* placeholder */ + }; + + vin5: video@e6ef5000 { + reg = <0 0xe6ef5000 0 0x1000>; + /* placeholder */ + }; + + vin6: video@e6ef6000 { + reg = <0 0xe6ef6000 0 0x1000>; + /* placeholder */ + }; + + vin7: video@e6ef7000 { + reg = <0 0xe6ef7000 0 0x1000>; + /* placeholder */ + }; + + rcar_sound: sound@ec500000 { + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ + /* placeholder */ + rcar_sound,dvc { + dvc0: dvc-0 { }; + dvc1: dvc-1 { }; + }; + + rcar_sound,src { + src0: src-0 { }; + src1: src-1 { }; + }; + + rcar_sound,ssi { + ssi0: ssi-0 { }; + ssi1: ssi-1 { }; + }; + }; + + xhci0: usb@ee000000 { + reg = <0 0xee000000 0 0xc00>; + /* placeholder */ + }; + + usb3_peri0: usb@ee020000 { + reg = <0 0xee020000 0 0x400>; + /* placeholder */ + }; + + ohci0: usb@ee080000 { + reg = <0 0xee080000 0 0x100>; + /* placeholder */ + }; + + ohci1: usb@ee0a0000 { + reg = <0 0xee0a0000 0 0x100>; + /* placeholder */ + }; + + ehci0: usb@ee080100 { + reg = <0 0xee080100 0 0x100>; + /* placeholder */ + }; + + ehci1: usb@ee0a0100 { + reg = <0 0xee0a0100 0 0x100>; + /* placeholder */ + }; + + usb2_phy0: usb-phy@ee080200 { + reg = <0 0xee080200 0 0x700>; + /* placeholder */ + }; + + usb2_phy1: usb-phy@ee0a0200 { + reg = <0 0xee0a0200 0 0x700>; + /* placeholder */ + }; + + sdhi0: sd@ee100000 { + reg = <0 0xee100000 0 0x2000>; + /* placeholder */ + }; + + sdhi2: sd@ee140000 { + reg = <0 0xee140000 0 0x2000>; + /* placeholder */ + }; + + sdhi3: sd@ee160000 { + reg = <0 0xee160000 0 0x2000>; + /* placeholder */ + }; + + gic: interrupt-controller@f1010000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xf1010000 0 0x1000>, + <0x0 0xf1020000 0 0x20000>, + <0x0 0xf1040000 0 0x20000>, + <0x0 0xf1060000 0 0x20000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 408>; + }; + + pciec0: pcie@fe000000 { + reg = <0 0xfe000000 0 0x80000>; + /* placeholder */ + }; + + pciec1: pcie@ee800000 { + reg = <0 0xee800000 0 0x80000>; + /* placeholder */ + }; + + csi20: csi2@fea80000 { + reg = <0 0xfea80000 0 0x10000>; + /* placeholder */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + + csi40: csi2@feaa0000 { + reg = <0 0xfeaa0000 0 0x10000>; + /* placeholder */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + }; + }; + }; + + hdmi0: hdmi@fead0000 { + reg = <0 0xfead0000 0 0x10000>; + /* placeholder */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + }; + port@1 { + reg = <1>; + }; + port@2 { + /* HDMI sound */ + reg = <2>; + }; + }; + }; + + du: display@feb00000 { + reg = <0 0xfeb00000 0 0x70000>; + /* placeholder */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_hdmi0: endpoint { + }; + }; + port@2 { + reg = <2>; + du_out_lvds0: endpoint { + }; + }; + }; + }; + + prr: chipid@fff00044 { + compatible = "renesas,prr"; + reg = <0 0xfff00044 0 4>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + }; + + /* External USB clocks - can be overridden by the board */ + usb3s0_clk: usb3s0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index 4ae163220f60..bdbe197774d2 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -2105,6 +2105,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 314>; + iommus = <&ipmmu_ds1 32>; status = "disabled"; }; @@ -2117,6 +2118,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 313>; + iommus = <&ipmmu_ds1 33>; status = "disabled"; }; @@ -2129,6 +2131,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 312>; + iommus = <&ipmmu_ds1 34>; status = "disabled"; }; @@ -2141,6 +2144,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 311>; + iommus = <&ipmmu_ds1 35>; status = "disabled"; }; @@ -2320,6 +2324,33 @@ resets = <&cpg 611>; }; + cmm0: cmm@fea40000 { + compatible = "renesas,r8a77965-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea40000 0 0x1000>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 711>; + resets = <&cpg 711>; + }; + + cmm1: cmm@fea50000 { + compatible = "renesas,r8a77965-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea50000 0 0x1000>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 710>; + resets = <&cpg 710>; + }; + + cmm3: cmm@fea70000 { + compatible = "renesas,r8a77965-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea70000 0 0x1000>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 708>; + resets = <&cpg 708>; + }; + csi20: csi2@fea80000 { compatible = "renesas,r8a77965-csi2"; reg = <0 0xfea80000 0 0x10000>; @@ -2467,10 +2498,12 @@ <&cpg CPG_MOD 723>, <&cpg CPG_MOD 721>; clock-names = "du.0", "du.1", "du.3"; - status = "disabled"; + renesas,cmms = <&cmm0>, <&cmm1>, <&cmm3>; vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>; + status = "disabled"; + ports { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi index 0cd3b376635d..0d0558e53533 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi @@ -652,7 +652,7 @@ }; pwm3: pwm@e6e33000 { - compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + compatible = "renesas,pwm-r8a77970", "renesas,pwm-rcar"; reg = <0 0xe6e33000 0 8>; #pwm-cells = <2>; clocks = <&cpg CPG_MOD 523>; @@ -1035,6 +1035,7 @@ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 314>; max-frequency = <200000000>; + iommus = <&ipmmu_ds1 32>; status = "disabled"; }; @@ -1120,7 +1121,7 @@ clock-names = "du.0"; power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 724>; - vsps = <&vspd0>; + vsps = <&vspd0 0>; status = "disabled"; ports { diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi index 461a47ea656d..4d86669af819 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi @@ -1338,6 +1338,7 @@ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 314>; max-frequency = <200000000>; + iommus = <&ipmmu_ds1 32>; status = "disabled"; }; @@ -1495,7 +1496,7 @@ clock-names = "du.0"; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 724>; - vsps = <&vspd0>; + vsps = <&vspd0 0>; status = "disabled"; ports { diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index 455954c3d98e..67a6824a962c 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -1580,6 +1580,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 314>; + iommus = <&ipmmu_ds1 32>; status = "disabled"; }; @@ -1592,6 +1593,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 313>; + iommus = <&ipmmu_ds1 33>; status = "disabled"; }; @@ -1604,6 +1606,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 311>; + iommus = <&ipmmu_ds1 35>; status = "disabled"; }; @@ -1727,6 +1730,24 @@ iommus = <&ipmmu_vi0 9>; }; + cmm0: cmm@fea40000 { + compatible = "renesas,r8a77990-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea40000 0 0x1000>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 711>; + resets = <&cpg 711>; + }; + + cmm1: cmm@fea50000 { + compatible = "renesas,r8a77990-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea50000 0 0x1000>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 710>; + resets = <&cpg 710>; + }; + csi40: csi2@feaa0000 { compatible = "renesas,r8a77990-csi2"; reg = <0 0xfeaa0000 0 0x10000>; @@ -1768,7 +1789,10 @@ clock-names = "du.0", "du.1"; resets = <&cpg 724>; reset-names = "du.0"; + + renesas,cmms = <&cmm0>, <&cmm1>; vsps = <&vspd0 0>, <&vspd1 0>; + status = "disabled"; ports { diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index 183fef86cf7c..e6ee2b709ba6 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -916,6 +916,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; resets = <&cpg 312>; + iommus = <&ipmmu_ds1 34>; status = "disabled"; }; @@ -993,6 +994,24 @@ iommus = <&ipmmu_vi0 9>; }; + cmm0: cmm@fea40000 { + compatible = "renesas,r8a77995-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea40000 0 0x1000>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 711>; + resets = <&cpg 711>; + }; + + cmm1: cmm@fea50000 { + compatible = "renesas,r8a77995-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea50000 0 0x1000>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 710>; + resets = <&cpg 710>; + }; + du: display@feb00000 { compatible = "renesas,du-r8a77995"; reg = <0 0xfeb00000 0 0x40000>; @@ -1003,7 +1022,10 @@ clock-names = "du.0", "du.1"; resets = <&cpg 724>; reset-names = "du.0"; + + renesas,cmms = <&cmm0>, <&cmm1>; vsps = <&vspd0 0>, <&vspd1 0>; + status = "disabled"; ports { diff --git a/arch/arm64/boot/dts/renesas/rzg2-advantech-idk-1110wr-panel.dtsi b/arch/arm64/boot/dts/renesas/rzg2-advantech-idk-1110wr-panel.dtsi new file mode 100644 index 000000000000..bcc21178ae04 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/rzg2-advantech-idk-1110wr-panel.dtsi @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Advantech idk-1110wr LVDS panel connected + * to RZ/G2 boards + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +/ { + panel-lvds { + compatible = "advantech,idk-1110wr", "panel-lvds"; + + width-mm = <223>; + height-mm = <125>; + + data-mapping = "jeida-24"; + + panel-timing { + /* 1024x600 @60Hz */ + clock-frequency = <51200000>; + hactive = <1024>; + vactive = <600>; + hsync-len = <240>; + hfront-porch = <40>; + hback-porch = <40>; + vfront-porch = <15>; + vback-porch = <10>; + vsync-len = <10>; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds_connector>; + }; + }; + }; +}; + +&lvds_connector { + remote-endpoint = <&panel_in>; +}; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 1f18a9392d15..48fb631d5451 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -1,5 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb @@ -27,6 +30,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts index 6eb7407a84aa..936ed7d71ffc 100644 --- a/arch/arm64/boot/dts/rockchip/px30-evb.dts +++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts @@ -14,7 +14,7 @@ compatible = "rockchip,px30-evb", "rockchip,px30"; chosen { - stdout-path = "serial2:1500000n8"; + stdout-path = "serial5:115200n8"; }; adc-keys { @@ -58,6 +58,14 @@ backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm1 0 25000 0>; + power-supply = <&vcc3v3_lcd>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + pinctrl-0 = <&emmc_reset>; + pinctrl-names = "default"; + reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>; }; sdio_pwrseq: sdio-pwrseq { @@ -74,13 +82,6 @@ reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO3_A4 */ }; - vcc_phy: vcc-phy-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_phy"; - regulator-always-on; - regulator-boot-on; - }; - vcc5v0_sys: vccsys { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; @@ -91,6 +92,22 @@ }; }; +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + &display_subsystem { status = "okay"; }; @@ -100,12 +117,15 @@ cap-mmc-highspeed; mmc-hs200-1_8v; non-removable; + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v0>; + vqmmc-supply = <&vccio_flash>; status = "okay"; }; &gmac { clock_in_out = "output"; - phy-supply = <&vcc_phy>; + phy-supply = <&vcc_rmii>; snps,reset-gpio = <&gpio2 13 GPIO_ACTIVE_LOW>; snps,reset-active-low; snps,reset-delays-us = <0 50000 50000>; @@ -114,6 +134,256 @@ &i2c0 { status = "okay"; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <0>; + clock-output-names = "xin32k"; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc5v0_sys>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-name = "vdd_log"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v0: vcc_rmii: DCDC_REG4 { + regulator-name = "vcc_3v0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_sys: DCDC_REG5 { + regulator-name = "vcc3v3_sys"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v0: LDO_REG1 { + regulator-name = "vcc_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_1v8: vccio_flash: vccio_sdio: LDO_REG2 { + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_1v0: LDO_REG3 { + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc3v0_pmu: LDO_REG4 { + regulator-name = "vcc3v0_pmu"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_sd: LDO_REG6 { + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc2v8_dvp: LDO_REG7 { + regulator-name = "vcc2v8_dvp"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <2800000>; + }; + }; + + vcc1v8_dvp: LDO_REG8 { + regulator-name = "vcc1v8_dvp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v5_dvp: LDO_REG9 { + regulator-name = "vcc1v5_dvp"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcc3v3_lcd: SWITCH_REG1 { + regulator-name = "vcc3v3_lcd"; + regulator-boot-on; + }; + + vcc5v0_host: SWITCH_REG2 { + regulator-name = "vcc5v0_host"; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; + + sensor@d { + compatible = "asahi-kasei,ak8963"; + reg = <0x0d>; + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + vdd-supply = <&vcc3v0_pmu>; + mount-matrix = "1", /* x0 */ + "0", /* y0 */ + "0", /* z0 */ + "0", /* x1 */ + "1", /* y1 */ + "0", /* z1 */ + "0", /* x2 */ + "0", /* y2 */ + "1"; /* z2 */ + }; + + touchscreen@14 { + compatible = "goodix,gt1151"; + reg = <0x14>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>; + irq-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; + VDDIO-supply = <&vcc3v3_lcd>; + }; + + sensor@4c { + compatible = "fsl,mma7660"; + reg = <0x4c>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB7 IRQ_TYPE_LEVEL_LOW>; + }; }; &i2s1_2ch { @@ -122,6 +392,13 @@ &io_domains { status = "okay"; + + vccio1-supply = <&vccio_sdio>; + vccio2-supply = <&vccio_sd>; + vccio3-supply = <&vcc_3v0>; + vccio4-supply = <&vcc3v0_pmu>; + vccio5-supply = <&vcc_3v0>; + vccio6-supply = <&vccio_flash>; }; &pinctrl { @@ -132,6 +409,12 @@ }; }; + emmc { + emmc_reset: emmc-reset { + rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int: pmic_int { rockchip,pins = @@ -164,6 +447,9 @@ &pmu_io_domains { status = "okay"; + + pmuio1-supply = <&vcc3v0_pmu>; + pmuio2-supply = <&vcc3v0_pmu>; }; &pwm1 { @@ -171,6 +457,7 @@ }; &saradc { + vref-supply = <&vcc_1v8>; status = "okay"; }; @@ -183,6 +470,8 @@ sd-uhs-sdr25; sd-uhs-sdr50; sd-uhs-sdr104; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; status = "okay"; }; @@ -196,13 +485,25 @@ status = "okay"; }; +&u2phy { + status = "okay"; + + u2phy_host: host-port { + status = "okay"; + }; + + u2phy_otg: otg-port { + status = "okay"; + }; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_xfer &uart1_cts>; status = "okay"; }; -&uart2 { +&uart5 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi index eb992d60e6ba..8812b70f3911 100644 --- a/arch/arm64/boot/dts/rockchip/px30.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -161,13 +161,6 @@ status = "disabled"; }; - firmware { - optee { - compatible = "linaro,optee-tz"; - method = "smc"; - }; - }; - gmac_clkin: external-gmac-clock { compatible = "fixed-clock"; clock-frequency = <50000000>; @@ -195,13 +188,6 @@ clock-output-names = "xin24m"; }; - xin32k: xin32k { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "xin32k"; - }; - pmu: power-management@ff000000 { compatible = "rockchip,px30-pmu", "syscon", "simple-mfd"; reg = <0x0 0xff000000 0x0 0x1000>; @@ -671,36 +657,102 @@ status = "disabled"; }; + otp: nvmem@ff290000 { + compatible = "rockchip,px30-otp"; + reg = <0x0 0xff290000 0x0 0x4000>; + clocks = <&cru SCLK_OTP_USR>, <&cru PCLK_OTP_NS>, + <&cru PCLK_OTP_PHY>; + clock-names = "otp", "apb_pclk", "phy"; + resets = <&cru SRST_OTP_PHY>; + reset-names = "phy"; + #address-cells = <1>; + #size-cells = <1>; + + /* Data cells */ + cpu_id: id@7 { + reg = <0x07 0x10>; + }; + cpu_leakage: cpu-leakage@17 { + reg = <0x17 0x1>; + }; + performance: performance@1e { + reg = <0x1e 0x1>; + bits = <4 3>; + }; + }; + cru: clock-controller@ff2b0000 { compatible = "rockchip,px30-cru"; reg = <0x0 0xff2b0000 0x0 0x1000>; + clocks = <&xin24m>, <&pmucru PLL_GPLL>; + clock-names = "xin24m", "gpll"; rockchip,grf = <&grf>; #clock-cells = <1>; #reset-cells = <1>; - assigned-clocks = <&cru PLL_NPLL>; - assigned-clock-rates = <1188000000>; + assigned-clocks = <&cru PLL_NPLL>, + <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>, + <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>, + <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>; + + assigned-clock-rates = <1188000000>, + <200000000>, <200000000>, + <150000000>, <150000000>, + <100000000>, <200000000>; }; pmucru: clock-controller@ff2bc000 { compatible = "rockchip,px30-pmucru"; reg = <0x0 0xff2bc000 0x0 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; rockchip,grf = <&grf>; #clock-cells = <1>; #reset-cells = <1>; assigned-clocks = <&pmucru PLL_GPLL>, <&pmucru PCLK_PMU_PRE>, - <&pmucru SCLK_WIFI_PMU>, <&cru ARMCLK>, - <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>, - <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>, - <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>; + <&pmucru SCLK_WIFI_PMU>; assigned-clock-rates = <1200000000>, <100000000>, - <26000000>, <600000000>, - <200000000>, <200000000>, - <150000000>, <150000000>, - <100000000>, <200000000>; + <26000000>; + }; + + usb2phy_grf: syscon@ff2c0000 { + compatible = "rockchip,px30-usb2phy-grf", "syscon", + "simple-mfd"; + reg = <0x0 0xff2c0000 0x0 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + + u2phy: usb2-phy@100 { + compatible = "rockchip,px30-usb2phy"; + reg = <0x100 0x20>; + clocks = <&pmucru SCLK_USBPHY_REF>; + clock-names = "phyclk"; + #clock-cells = <0>; + assigned-clocks = <&cru USB480M>; + assigned-clock-parents = <&u2phy>; + clock-output-names = "usb480m_phy"; + status = "disabled"; + + u2phy_host: host-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "linestate"; + status = "disabled"; + }; + + u2phy_otg: otg-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "otg-bvalid", "otg-id", + "linestate"; + status = "disabled"; + }; + }; }; usb20_otg: usb@ff300000 { @@ -715,6 +767,8 @@ g-rx-fifo-size = <280>; g-tx-fifo-size = <256 128 128 64 32 16>; g-use-dma; + phys = <&u2phy_otg>; + phy-names = "usb2-phy"; power-domains = <&power PX30_PD_USB>; status = "disabled"; }; @@ -725,6 +779,8 @@ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST>; clock-names = "usbhost"; + phys = <&u2phy_host>; + phy-names = "usb"; power-domains = <&power PX30_PD_USB>; status = "disabled"; }; @@ -735,6 +791,8 @@ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST>; clock-names = "usbhost"; + phys = <&u2phy_host>; + phy-names = "usb"; power-domains = <&power PX30_PD_USB>; status = "disabled"; }; @@ -801,6 +859,8 @@ clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; fifo-depth = <0x100>; max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; power-domains = <&power PX30_PD_MMC_NAND>; status = "disabled"; }; @@ -831,7 +891,7 @@ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vopb_mmu"; clocks = <&cru ACLK_VOPB>, <&cru HCLK_VOPB>; - clock-names = "aclk", "hclk"; + clock-names = "aclk", "iface"; power-domains = <&power PX30_PD_VO>; #iommu-cells = <0>; status = "disabled"; @@ -863,7 +923,7 @@ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vopl_mmu"; clocks = <&cru ACLK_VOPL>, <&cru HCLK_VOPL>; - clock-names = "aclk", "hclk"; + clock-names = "aclk", "iface"; power-domains = <&power PX30_PD_VO>; #iommu-cells = <0>; status = "disabled"; @@ -1164,11 +1224,6 @@ rockchip,pins = <0 RK_PB5 1 &pcfg_pull_none>; }; - - uart0_rts_gpio: uart0-rts-gpio { - rockchip,pins = - <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; }; uart1 { @@ -1187,11 +1242,6 @@ rockchip,pins = <1 RK_PC3 1 &pcfg_pull_none>; }; - - uart1_rts_gpio: uart1-rts-gpio { - rockchip,pins = - <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; - }; }; uart2-m0 { @@ -1226,11 +1276,6 @@ rockchip,pins = <0 RK_PC3 2 &pcfg_pull_none>; }; - - uart3m0_rts_gpio: uart3m0-rts-gpio { - rockchip,pins = - <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; - }; }; uart3-m1 { @@ -1249,11 +1294,6 @@ rockchip,pins = <1 RK_PB5 2 &pcfg_pull_none>; }; - - uart3m1_rts_gpio: uart3m1-rts-gpio { - rockchip,pins = - <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; }; uart4 { @@ -1602,16 +1642,6 @@ <1 RK_PD4 1 &pcfg_pull_up_8ma>, <1 RK_PD5 1 &pcfg_pull_up_8ma>; }; - - sdmmc_gpio: sdmmc-gpio { - rockchip,pins = - <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up_4ma>, - <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up_4ma>, - <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up_4ma>, - <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up_4ma>, - <1 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up_4ma>, - <1 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up_4ma>; - }; }; sdio { @@ -1632,16 +1662,6 @@ <1 RK_PD0 1 &pcfg_pull_up>, <1 RK_PD1 1 &pcfg_pull_up>; }; - - sdio_gpio: sdio-gpio { - rockchip,pins = - <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; - }; }; emmc { @@ -1655,11 +1675,6 @@ <1 RK_PB2 2 &pcfg_pull_up_8ma>; }; - emmc_pwren: emmc-pwren { - rockchip,pins = - <1 RK_PB0 2 &pcfg_pull_none>; - }; - emmc_rstnout: emmc-rstnout { rockchip,pins = <1 RK_PB3 2 &pcfg_pull_none>; diff --git a/arch/arm64/boot/dts/rockchip/rk3308-evb.dts b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts new file mode 100644 index 000000000000..9b4f855ea5d4 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts @@ -0,0 +1,230 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd + * + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "rk3308.dtsi" + +/ { + model = "Rockchip RK3308 EVB"; + compatible = "rockchip,rk3308-evb", "rockchip,rk3308"; + + chosen { + stdout-path = "serial4:1500000n8"; + }; + + adc-keys0 { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + poll-interval = <100>; + keyup-threshold-microvolt = <1800000>; + + func-key { + linux,code = <KEY_FN>; + label = "function"; + press-threshold-microvolt = <18000>; + }; + }; + + adc-keys1 { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + poll-interval = <100>; + keyup-threshold-microvolt = <1800000>; + + esc-key { + linux,code = <KEY_MICMUTE>; + label = "micmute"; + press-threshold-microvolt = <1130000>; + }; + + home-key { + linux,code = <KEY_MODE>; + label = "mode"; + press-threshold-microvolt = <901000>; + }; + + menu-key { + linux,code = <KEY_PLAY>; + label = "play"; + press-threshold-microvolt = <624000>; + }; + + vol-down-key { + linux,code = <KEY_VOLUMEDOWN>; + label = "volume down"; + press-threshold-microvolt = <300000>; + }; + + vol-up-key { + linux,code = <KEY_VOLUMEUP>; + label = "volume up"; + press-threshold-microvolt = <18000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key>; + + power { + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + label = "GPIO Key Power"; + debounce-interval = <100>; + wakeup-source; + }; + }; + + vcc12v_dcin: vcc12v-dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc12v_dcin>; + }; + + vccio_sdio: vcc_1v8: vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_io>; + }; + + vcc_ddr: vcc-ddr { + compatible = "regulator-fixed"; + regulator-name = "vcc_ddr"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_io: vcc-io { + compatible = "regulator-fixed"; + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; + + vccio_flash: vccio-flash { + compatible = "regulator-fixed"; + regulator-name = "vccio_flash"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_io>; + }; + + vcc5v0_host: vcc5v0-host { + compatible = "regulator-fixed"; + gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&usb_drv>; + regulator-name = "vbus_host"; + vin-supply = <&vcc5v0_sys>; + }; + + vdd_core: vdd-core { + compatible = "pwm-regulator"; + pwms = <&pwm0 0 5000 1>; + regulator-name = "vdd_core"; + regulator-min-microvolt = <827000>; + regulator-max-microvolt = <1340000>; + regulator-always-on; + regulator-boot-on; + regulator-settling-time-up-us = <250>; + pwm-supply = <&vcc5v0_sys>; + }; + + vdd_log: vdd-log { + compatible = "regulator-fixed"; + regulator-name = "vdd_log"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; + + vdd_1v0: vdd-1v0 { + compatible = "regulator-fixed"; + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_core>; +}; + +&saradc { + status = "okay"; + vref-supply = <&vcc_1v8>; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&rtc_32k>; + + buttons { + pwr_key: pwr-key { + rockchip,pins = <0 RK_PA6 0 &pcfg_pull_up>; + }; + }; + + usb { + usb_drv: usb-drv { + rockchip,pins = <0 RK_PC5 0 &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PA2 0 &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; + pinctrl-0 = <&pwm0_pin_pull_down>; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_xfer>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts new file mode 100644 index 000000000000..aa256350b18f --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts @@ -0,0 +1,188 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd + */ + +/dts-v1/; +#include "rk3308.dtsi" + +/ { + model = "Firefly ROC-RK3308-CC board"; + compatible = "firefly,roc-rk3308-cc", "rockchip,rk3308"; + chosen { + stdout-path = "serial2:1500000n8"; + }; + + ir_rx { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_recv_pin>; + }; + + ir_tx { + compatible = "pwm-ir-tx"; + pwms = <&pwm5 0 25000 0>; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "firefly:red:power"; + linux,default-trigger = "ir-power-click"; + default-state = "on"; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + }; + + user { + label = "firefly:blue:user"; + linux,default-trigger = "ir-user-click"; + default-state = "off"; + gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_HIGH>; + }; + }; + + typec_vcc5v: typec-vcc5v { + compatible = "regulator-fixed"; + regulator-name = "typec_vcc5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&typec_vcc5v>; + }; + + vcc_io: vcc-io { + compatible = "regulator-fixed"; + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_sdmmc: vcc-sdmmc { + compatible = "regulator-gpio"; + regulator-name = "vcc_sdmmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_HIGH>; + states = <1800000 0x0 + 3300000 0x1>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_sd: vcc-sd { + compatible = "regulator-fixed"; + gpio = <&gpio4 RK_PD6 GPIO_ACTIVE_LOW>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vim-supply = <&vcc_io>; + }; + + vdd_core: vdd-core { + compatible = "pwm-regulator"; + pwms = <&pwm0 0 5000 1>; + regulator-name = "vdd_core"; + regulator-min-microvolt = <827000>; + regulator-max-microvolt = <1340000>; + regulator-init-microvolt = <1015000>; + regulator-settling-time-up-us = <250>; + regulator-always-on; + regulator-boot-on; + pwm-supply = <&vcc5v0_sys>; + }; + + vdd_log: vdd-log { + compatible = "regulator-fixed"; + regulator-name = "vdd_log"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_core>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + mmc-hs200-1_8v; + non-removable; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <400000>; + status = "okay"; + + rtc: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + #clock-cells = <0>; + }; +}; + +&pwm5 { + status = "okay"; + pinctrl-names = "active"; + pinctrl-0 = <&pwm5_pin_pull_down>; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&rtc_32k>; + + ir-receiver { + ir_recv_pin: ir-recv-pin { + rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + buttons { + pwr_key: pwr-key { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pwm0 { + status = "okay"; + pinctrl-0 = <&pwm0_pin_pull_down>; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <300>; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vcc_sdmmc>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi new file mode 100644 index 000000000000..8bdc66c62975 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi @@ -0,0 +1,1739 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd + * + */ + +#include <dt-bindings/clock/rk3308-cru.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,boot-mode.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + compatible = "rockchip,rk3308"; + + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35", "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + clocks = <&cru ARMCLK>; + #cooling-cells = <2>; + dynamic-power-coefficient = <90>; + operating-points-v2 = <&cpu0_opp_table>; + cpu-idle-states = <&CPU_SLEEP>; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35", "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + operating-points-v2 = <&cpu0_opp_table>; + cpu-idle-states = <&CPU_SLEEP>; + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a35", "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + operating-points-v2 = <&cpu0_opp_table>; + cpu-idle-states = <&CPU_SLEEP>; + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a35", "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + operating-points-v2 = <&cpu0_opp_table>; + cpu-idle-states = <&CPU_SLEEP>; + next-level-cache = <&l2>; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP: cpu-sleep { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <120>; + exit-latency-us = <250>; + min-residency-us = <900>; + }; + }; + + l2: l2-cache { + compatible = "cache"; + }; + }; + + cpu0_opp_table: cpu0-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <950000 950000 1340000>; + clock-latency-ns = <40000>; + opp-suspend; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <950000 950000 1340000>; + clock-latency-ns = <40000>; + }; + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <1025000 1025000 1340000>; + clock-latency-ns = <40000>; + }; + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1125000 1125000 1340000>; + clock-latency-ns = <40000>; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + mac_clkin: external-mac-clock { + compatible = "fixed-clock"; + clock-frequency = <50000000>; + clock-output-names = "mac_clkin"; + #clock-cells = <0>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + xin24m: xin24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + }; + + grf: grf@ff000000 { + compatible = "rockchip,rk3308-grf", "syscon", "simple-mfd"; + reg = <0x0 0xff000000 0x0 0x10000>; + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x500>; + mode-bootloader = <BOOT_BL_DOWNLOAD>; + mode-loader = <BOOT_BL_DOWNLOAD>; + mode-normal = <BOOT_NORMAL>; + mode-recovery = <BOOT_RECOVERY>; + mode-fastboot = <BOOT_FASTBOOT>; + }; + }; + + detect_grf: syscon@ff00b000 { + compatible = "rockchip,rk3308-detect-grf", "syscon", "simple-mfd"; + reg = <0x0 0xff00b000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + core_grf: syscon@ff00c000 { + compatible = "rockchip,rk3308-core-grf", "syscon", "simple-mfd"; + reg = <0x0 0xff00c000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + i2c0: i2c@ff040000 { + compatible = "rockchip,rk3308-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xff040000 0x0 0x1000>; + clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@ff050000 { + compatible = "rockchip,rk3308-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xff050000 0x0 0x1000>; + clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@ff060000 { + compatible = "rockchip,rk3308-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xff060000 0x0 0x1000>; + clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@ff070000 { + compatible = "rockchip,rk3308-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xff070000 0x0 0x1000>; + clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3m0_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + wdt: watchdog@ff080000 { + compatible = "snps,dw-wdt"; + reg = <0x0 0xff080000 0x0 0x100>; + clocks = <&cru PCLK_WDT>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart0: serial@ff0a0000 { + compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff0a0000 0x0 0x100>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "disabled"; + }; + + uart1: serial@ff0b0000 { + compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff0b0000 0x0 0x100>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer &uart1_cts &uart1_rts>; + status = "disabled"; + }; + + uart2: serial@ff0c0000 { + compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff0c0000 0x0 0x100>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2m0_xfer>; + status = "disabled"; + }; + + uart3: serial@ff0d0000 { + compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff0d0000 0x0 0x100>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_xfer>; + status = "disabled"; + }; + + uart4: serial@ff0e0000 { + compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff0e0000 0x0 0x100>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_xfer &uart4_cts &uart4_rts>; + status = "disabled"; + }; + + spi0: spi@ff120000 { + compatible = "rockchip,rk3308-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff120000 0x0 0x1000>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac0 0>, <&dmac0 1>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_clk &spi0_csn0 &spi0_miso &spi0_mosi>; + status = "disabled"; + }; + + spi1: spi@ff130000 { + compatible = "rockchip,rk3308-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff130000 0x0 0x1000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac0 2>, <&dmac0 3>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_clk &spi1_csn0 &spi1_miso &spi1_mosi>; + status = "disabled"; + }; + + spi2: spi@ff140000 { + compatible = "rockchip,rk3308-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff140000 0x0 0x1000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac1 16>, <&dmac1 17>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_clk &spi2_csn0 &spi2_miso &spi2_mosi>; + status = "disabled"; + }; + + pwm8: pwm@ff160000 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff160000 0x0 0x10>; + clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm8_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm9: pwm@ff160010 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff160010 0x0 0x10>; + clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm9_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm10: pwm@ff160020 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff160020 0x0 0x10>; + clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm10_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm11: pwm@ff160030 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff160030 0x0 0x10>; + clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm11_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm4: pwm@ff170000 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff170000 0x0 0x10>; + clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm4_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm5: pwm@ff170010 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff170010 0x0 0x10>; + clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm5_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm6: pwm@ff170020 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff170020 0x0 0x10>; + clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm6_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm7: pwm@ff170030 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff170030 0x0 0x10>; + clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm7_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm0: pwm@ff180000 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff180000 0x0 0x10>; + clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm1: pwm@ff180010 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff180010 0x0 0x10>; + clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm2: pwm@ff180020 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff180020 0x0 0x10>; + clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm3: pwm@ff180030 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff180030 0x0 0x10>; + clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + rktimer: rktimer@ff1a0000 { + compatible = "rockchip,rk3288-timer"; + reg = <0x0 0xff1a0000 0x0 0x20>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER0>; + clock-names = "pclk", "timer"; + }; + + saradc: saradc@ff1e0000 { + compatible = "rockchip,rk3308-saradc", "rockchip,rk3399-saradc"; + reg = <0x0 0xff1e0000 0x0 0x100>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + #io-channel-cells = <1>; + resets = <&cru SRST_SARADC_P>; + reset-names = "saradc-apb"; + status = "disabled"; + }; + + amba { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dmac0: dma-controller@ff2c0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff2c0000 0x0 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_DMAC0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + + dmac1: dma-controller@ff2d0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff2d0000 0x0 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_DMAC1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + }; + + i2s_2ch_0: i2s@ff350000 { + compatible = "rockchip,rk3308-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xff350000 0x0 0x1000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_I2S0_2CH>, <&cru HCLK_I2S0_2CH>; + clock-names = "i2s_clk", "i2s_hclk"; + dmas = <&dmac1 8>, <&dmac1 9>; + dma-names = "tx", "rx"; + resets = <&cru SRST_I2S0_2CH_M>, <&cru SRST_I2S0_2CH_H>; + reset-names = "reset-m", "reset-h"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s_2ch_0_sclk + &i2s_2ch_0_lrck + &i2s_2ch_0_sdi + &i2s_2ch_0_sdo>; + status = "disabled"; + }; + + i2s_2ch_1: i2s@ff360000 { + compatible = "rockchip,rk3308-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xff360000 0x0 0x1000>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_I2S1_2CH>, <&cru HCLK_I2S1_2CH>; + clock-names = "i2s_clk", "i2s_hclk"; + dmas = <&dmac1 11>; + dma-names = "rx"; + resets = <&cru SRST_I2S1_2CH_M>, <&cru SRST_I2S1_2CH_H>; + reset-names = "reset-m", "reset-h"; + status = "disabled"; + }; + + spdif_tx: spdif-tx@ff3a0000 { + compatible = "rockchip,rk3308-spdif", "rockchip,rk3328-spdif"; + reg = <0x0 0xff3a0000 0x0 0x1000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SPDIF_TX>, <&cru HCLK_SPDIFTX>; + clock-names = "mclk", "hclk"; + dmas = <&dmac1 13>; + dma-names = "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spdif_out>; + status = "disabled"; + }; + + sdmmc: dwmmc@ff480000 { + compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff480000 0x0 0x4000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + bus-width = <4>; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>; + status = "disabled"; + }; + + emmc: dwmmc@ff490000 { + compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff490000 0x0 0x4000>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + bus-width = <8>; + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, + <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <150000000>; + status = "disabled"; + }; + + sdio: dwmmc@ff4a0000 { + compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff4a0000 0x0 0x4000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + bus-width = <4>; + clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, + <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdio_bus4 &sdio_cmd &sdio_clk>; + status = "disabled"; + }; + + cru: clock-controller@ff500000 { + compatible = "rockchip,rk3308-cru"; + reg = <0x0 0xff500000 0x0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + rockchip,grf = <&grf>; + + assigned-clocks = <&cru SCLK_RTC32K>; + assigned-clock-rates = <32768>; + }; + + gic: interrupt-controller@ff580000 { + compatible = "arm,gic-400"; + reg = <0x0 0xff581000 0x0 0x1000>, + <0x0 0xff582000 0x0 0x2000>, + <0x0 0xff584000 0x0 0x2000>, + <0x0 0xff586000 0x0 0x2000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <3>; + interrupt-controller; + #address-cells = <0>; + }; + + sram: sram@fff80000 { + compatible = "mmio-sram"; + reg = <0x0 0xfff80000 0x0 0x40000>; + ranges = <0 0x0 0xfff80000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + + /* reserved for ddr dvfs and system suspend/resume */ + ddr-sram@0 { + reg = <0x0 0x8000>; + }; + + /* reserved for vad audio buffer */ + vad_sram: vad-sram@8000 { + reg = <0x8000 0x38000>; + }; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rk3308-pinctrl"; + rockchip,grf = <&grf>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio0: gpio0@ff220000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff220000 0x0 0x100>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO0>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio1@ff230000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff230000 0x0 0x100>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO1>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio2@ff240000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff240000 0x0 0x100>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO2>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio3@ff250000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff250000 0x0 0x100>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO3>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio4@ff260000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff260000 0x0 0x100>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcfg_pull_up: pcfg-pull-up { + bias-pull-up; + }; + + pcfg_pull_down: pcfg-pull-down { + bias-pull-down; + }; + + pcfg_pull_none: pcfg-pull-none { + bias-disable; + }; + + pcfg_pull_none_2ma: pcfg-pull-none-2ma { + bias-disable; + drive-strength = <2>; + }; + + pcfg_pull_up_2ma: pcfg-pull-up-2ma { + bias-pull-up; + drive-strength = <2>; + }; + + pcfg_pull_up_4ma: pcfg-pull-up-4ma { + bias-pull-up; + drive-strength = <4>; + }; + + pcfg_pull_none_4ma: pcfg-pull-none-4ma { + bias-disable; + drive-strength = <4>; + }; + + pcfg_pull_down_4ma: pcfg-pull-down-4ma { + bias-pull-down; + drive-strength = <4>; + }; + + pcfg_pull_none_8ma: pcfg-pull-none-8ma { + bias-disable; + drive-strength = <8>; + }; + + pcfg_pull_up_8ma: pcfg-pull-up-8ma { + bias-pull-up; + drive-strength = <8>; + }; + + pcfg_pull_none_12ma: pcfg-pull-none-12ma { + bias-disable; + drive-strength = <12>; + }; + + pcfg_pull_up_12ma: pcfg-pull-up-12ma { + bias-pull-up; + drive-strength = <12>; + }; + + pcfg_pull_none_smt: pcfg-pull-none-smt { + bias-disable; + input-schmitt-enable; + }; + + pcfg_output_high: pcfg-output-high { + output-high; + }; + + pcfg_output_low: pcfg-output-low { + output-low; + }; + + pcfg_input_high: pcfg-input-high { + bias-pull-up; + input-enable; + }; + + pcfg_input: pcfg-input { + input-enable; + }; + + emmc { + emmc_clk: emmc-clk { + rockchip,pins = + <3 RK_PB1 2 &pcfg_pull_none_8ma>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = + <3 RK_PB0 2 &pcfg_pull_up_8ma>; + }; + + emmc_pwren: emmc-pwren { + rockchip,pins = + <3 RK_PB3 2 &pcfg_pull_none>; + }; + + emmc_rstn: emmc-rstn { + rockchip,pins = + <3 RK_PB2 2 &pcfg_pull_none>; + }; + + emmc_bus1: emmc-bus1 { + rockchip,pins = + <3 RK_PA0 2 &pcfg_pull_up_8ma>; + }; + + emmc_bus4: emmc-bus4 { + rockchip,pins = + <3 RK_PA0 2 &pcfg_pull_up_8ma>, + <3 RK_PA1 2 &pcfg_pull_up_8ma>, + <3 RK_PA2 2 &pcfg_pull_up_8ma>, + <3 RK_PA3 2 &pcfg_pull_up_8ma>; + }; + + emmc_bus8: emmc-bus8 { + rockchip,pins = + <3 RK_PA0 2 &pcfg_pull_up_8ma>, + <3 RK_PA1 2 &pcfg_pull_up_8ma>, + <3 RK_PA2 2 &pcfg_pull_up_8ma>, + <3 RK_PA3 2 &pcfg_pull_up_8ma>, + <3 RK_PA4 2 &pcfg_pull_up_8ma>, + <3 RK_PA5 2 &pcfg_pull_up_8ma>, + <3 RK_PA6 2 &pcfg_pull_up_8ma>, + <3 RK_PA7 2 &pcfg_pull_up_8ma>; + }; + }; + + flash { + flash_csn0: flash-csn0 { + rockchip,pins = + <3 RK_PB5 1 &pcfg_pull_none>; + }; + + flash_rdy: flash-rdy { + rockchip,pins = + <3 RK_PB4 1 &pcfg_pull_none>; + }; + + flash_ale: flash-ale { + rockchip,pins = + <3 RK_PB3 1 &pcfg_pull_none>; + }; + + flash_cle: flash-cle { + rockchip,pins = + <3 RK_PB1 1 &pcfg_pull_none>; + }; + + flash_wrn: flash-wrn { + rockchip,pins = + <3 RK_PB0 1 &pcfg_pull_none>; + }; + + flash_rdn: flash-rdn { + rockchip,pins = + <3 RK_PB2 1 &pcfg_pull_none>; + }; + + flash_bus8: flash-bus8 { + rockchip,pins = + <3 RK_PA0 1 &pcfg_pull_up_12ma>, + <3 RK_PA1 1 &pcfg_pull_up_12ma>, + <3 RK_PA2 1 &pcfg_pull_up_12ma>, + <3 RK_PA3 1 &pcfg_pull_up_12ma>, + <3 RK_PA4 1 &pcfg_pull_up_12ma>, + <3 RK_PA5 1 &pcfg_pull_up_12ma>, + <3 RK_PA6 1 &pcfg_pull_up_12ma>, + <3 RK_PA7 1 &pcfg_pull_up_12ma>; + }; + }; + + gmac { + rmii_pins: rmii-pins { + rockchip,pins = + /* mac_txen */ + <1 RK_PC1 3 &pcfg_pull_none_12ma>, + /* mac_txd1 */ + <1 RK_PC3 3 &pcfg_pull_none_12ma>, + /* mac_txd0 */ + <1 RK_PC2 3 &pcfg_pull_none_12ma>, + /* mac_rxd0 */ + <1 RK_PC4 3 &pcfg_pull_none>, + /* mac_rxd1 */ + <1 RK_PC5 3 &pcfg_pull_none>, + /* mac_rxer */ + <1 RK_PB7 3 &pcfg_pull_none>, + /* mac_rxdv */ + <1 RK_PC0 3 &pcfg_pull_none>, + /* mac_mdio */ + <1 RK_PB6 3 &pcfg_pull_none>, + /* mac_mdc */ + <1 RK_PB5 3 &pcfg_pull_none>; + }; + + mac_refclk_12ma: mac-refclk-12ma { + rockchip,pins = + <1 RK_PB4 3 &pcfg_pull_none_12ma>; + }; + + mac_refclk: mac-refclk { + rockchip,pins = + <1 RK_PB4 3 &pcfg_pull_none>; + }; + }; + + gmac-m1 { + rmiim1_pins: rmiim1-pins { + rockchip,pins = + /* mac_txen */ + <4 RK_PB7 2 &pcfg_pull_none_12ma>, + /* mac_txd1 */ + <4 RK_PA5 2 &pcfg_pull_none_12ma>, + /* mac_txd0 */ + <4 RK_PA4 2 &pcfg_pull_none_12ma>, + /* mac_rxd0 */ + <4 RK_PA2 2 &pcfg_pull_none>, + /* mac_rxd1 */ + <4 RK_PA3 2 &pcfg_pull_none>, + /* mac_rxer */ + <4 RK_PA0 2 &pcfg_pull_none>, + /* mac_rxdv */ + <4 RK_PA1 2 &pcfg_pull_none>, + /* mac_mdio */ + <4 RK_PB6 2 &pcfg_pull_none>, + /* mac_mdc */ + <4 RK_PB5 2 &pcfg_pull_none>; + }; + + macm1_refclk_12ma: macm1-refclk-12ma { + rockchip,pins = + <4 RK_PB4 2 &pcfg_pull_none_12ma>; + }; + + macm1_refclk: macm1-refclk { + rockchip,pins = + <4 RK_PB4 2 &pcfg_pull_none>; + }; + }; + + i2c0 { + i2c0_xfer: i2c0-xfer { + rockchip,pins = + <1 RK_PD0 2 &pcfg_pull_none_smt>, + <1 RK_PD1 2 &pcfg_pull_none_smt>; + }; + }; + + i2c1 { + i2c1_xfer: i2c1-xfer { + rockchip,pins = + <0 RK_PB3 1 &pcfg_pull_none_smt>, + <0 RK_PB4 1 &pcfg_pull_none_smt>; + }; + }; + + i2c2 { + i2c2_xfer: i2c2-xfer { + rockchip,pins = + <2 RK_PA2 3 &pcfg_pull_none_smt>, + <2 RK_PA3 3 &pcfg_pull_none_smt>; + }; + }; + + i2c3-m0 { + i2c3m0_xfer: i2c3m0-xfer { + rockchip,pins = + <0 RK_PB7 2 &pcfg_pull_none_smt>, + <0 RK_PC0 2 &pcfg_pull_none_smt>; + }; + }; + + i2c3-m1 { + i2c3m1_xfer: i2c3m1-xfer { + rockchip,pins = + <3 RK_PB4 2 &pcfg_pull_none_smt>, + <3 RK_PB5 2 &pcfg_pull_none_smt>; + }; + }; + + i2c3-m2 { + i2c3m2_xfer: i2c3m2-xfer { + rockchip,pins = + <2 RK_PA1 3 &pcfg_pull_none_smt>, + <2 RK_PA0 3 &pcfg_pull_none_smt>; + }; + }; + + i2s_2ch_0 { + i2s_2ch_0_mclk: i2s-2ch-0-mclk { + rockchip,pins = + <4 RK_PB4 1 &pcfg_pull_none>; + }; + + i2s_2ch_0_sclk: i2s-2ch-0-sclk { + rockchip,pins = + <4 RK_PB5 1 &pcfg_pull_none>; + }; + + i2s_2ch_0_lrck: i2s-2ch-0-lrck { + rockchip,pins = + <4 RK_PB6 1 &pcfg_pull_none>; + }; + + i2s_2ch_0_sdo: i2s-2ch-0-sdo { + rockchip,pins = + <4 RK_PB7 1 &pcfg_pull_none>; + }; + + i2s_2ch_0_sdi: i2s-2ch-0-sdi { + rockchip,pins = + <4 RK_PC0 1 &pcfg_pull_none>; + }; + }; + + i2s_8ch_0 { + i2s_8ch_0_mclk: i2s-8ch-0-mclk { + rockchip,pins = + <2 RK_PA4 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sclktx: i2s-8ch-0-sclktx { + rockchip,pins = + <2 RK_PA5 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sclkrx: i2s-8ch-0-sclkrx { + rockchip,pins = + <2 RK_PA6 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_lrcktx: i2s-8ch-0-lrcktx { + rockchip,pins = + <2 RK_PA7 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_lrckrx: i2s-8ch-0-lrckrx { + rockchip,pins = + <2 RK_PB0 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdo0: i2s-8ch-0-sdo0 { + rockchip,pins = + <2 RK_PB1 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdo1: i2s-8ch-0-sdo1 { + rockchip,pins = + <2 RK_PB2 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdo2: i2s-8ch-0-sdo2 { + rockchip,pins = + <2 RK_PB3 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdo3: i2s-8ch-0-sdo3 { + rockchip,pins = + <2 RK_PB4 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdi0: i2s-8ch-0-sdi0 { + rockchip,pins = + <2 RK_PB5 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdi1: i2s-8ch-0-sdi1 { + rockchip,pins = + <2 RK_PB6 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdi2: i2s-8ch-0-sdi2 { + rockchip,pins = + <2 RK_PB7 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdi3: i2s-8ch-0-sdi3 { + rockchip,pins = + <2 RK_PC0 1 &pcfg_pull_none>; + }; + }; + + i2s_8ch_1_m0 { + i2s_8ch_1_m0_mclk: i2s-8ch-1-m0-mclk { + rockchip,pins = + <1 RK_PA2 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sclktx: i2s-8ch-1-m0-sclktx { + rockchip,pins = + <1 RK_PA3 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sclkrx: i2s-8ch-1-m0-sclkrx { + rockchip,pins = + <1 RK_PA4 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_lrcktx: i2s-8ch-1-m0-lrcktx { + rockchip,pins = + <1 RK_PA5 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_lrckrx: i2s-8ch-1-m0-lrckrx { + rockchip,pins = + <1 RK_PA6 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sdo0: i2s-8ch-1-m0-sdo0 { + rockchip,pins = + <1 RK_PA7 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sdo1_sdi3: i2s-8ch-1-m0-sdo1-sdi3 { + rockchip,pins = + <1 RK_PB0 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sdo2_sdi2: i2s-8ch-1-m0-sdo2-sdi2 { + rockchip,pins = + <1 RK_PB1 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sdo3_sdi1: i2s-8ch-1-m0-sdo3_sdi1 { + rockchip,pins = + <1 RK_PB2 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sdi0: i2s-8ch-1-m0-sdi0 { + rockchip,pins = + <1 RK_PB3 2 &pcfg_pull_none>; + }; + }; + + i2s_8ch_1_m1 { + i2s_8ch_1_m1_mclk: i2s-8ch-1-m1-mclk { + rockchip,pins = + <1 RK_PB4 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sclktx: i2s-8ch-1-m1-sclktx { + rockchip,pins = + <1 RK_PB5 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sclkrx: i2s-8ch-1-m1-sclkrx { + rockchip,pins = + <1 RK_PB6 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_lrcktx: i2s-8ch-1-m1-lrcktx { + rockchip,pins = + <1 RK_PB7 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_lrckrx: i2s-8ch-1-m1-lrckrx { + rockchip,pins = + <1 RK_PC0 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sdo0: i2s-8ch-1-m1-sdo0 { + rockchip,pins = + <1 RK_PC1 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sdo1_sdi3: i2s-8ch-1-m1-sdo1-sdi3 { + rockchip,pins = + <1 RK_PC2 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sdo2_sdi2: i2s-8ch-1-m1-sdo2-sdi2 { + rockchip,pins = + <1 RK_PC3 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sdo3_sdi1: i2s-8ch-1-m1-sdo3_sdi1 { + rockchip,pins = + <1 RK_PC4 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sdi0: i2s-8ch-1-m1-sdi0 { + rockchip,pins = + <1 RK_PC5 2 &pcfg_pull_none>; + }; + }; + + pdm_m0 { + pdm_m0_clk: pdm-m0-clk { + rockchip,pins = + <1 RK_PA4 3 &pcfg_pull_none>; + }; + + pdm_m0_sdi0: pdm-m0-sdi0 { + rockchip,pins = + <1 RK_PB3 3 &pcfg_pull_none>; + }; + + pdm_m0_sdi1: pdm-m0-sdi1 { + rockchip,pins = + <1 RK_PB2 3 &pcfg_pull_none>; + }; + + pdm_m0_sdi2: pdm-m0-sdi2 { + rockchip,pins = + <1 RK_PB1 3 &pcfg_pull_none>; + }; + + pdm_m0_sdi3: pdm-m0-sdi3 { + rockchip,pins = + <1 RK_PB0 3 &pcfg_pull_none>; + }; + }; + + pdm_m1 { + pdm_m1_clk: pdm-m1-clk { + rockchip,pins = + <1 RK_PB6 4 &pcfg_pull_none>; + }; + + pdm_m1_sdi0: pdm-m1-sdi0 { + rockchip,pins = + <1 RK_PC5 4 &pcfg_pull_none>; + }; + + pdm_m1_sdi1: pdm-m1-sdi1 { + rockchip,pins = + <1 RK_PC4 4 &pcfg_pull_none>; + }; + + pdm_m1_sdi2: pdm-m1-sdi2 { + rockchip,pins = + <1 RK_PC3 4 &pcfg_pull_none>; + }; + + pdm_m1_sdi3: pdm-m1-sdi3 { + rockchip,pins = + <1 RK_PC2 4 &pcfg_pull_none>; + }; + }; + + pdm_m2 { + pdm_m2_clkm: pdm-m2-clkm { + rockchip,pins = + <2 RK_PA4 3 &pcfg_pull_none>; + }; + + pdm_m2_clk: pdm-m2-clk { + rockchip,pins = + <2 RK_PA6 2 &pcfg_pull_none>; + }; + + pdm_m2_sdi0: pdm-m2-sdi0 { + rockchip,pins = + <2 RK_PB5 2 &pcfg_pull_none>; + }; + + pdm_m2_sdi1: pdm-m2-sdi1 { + rockchip,pins = + <2 RK_PB6 2 &pcfg_pull_none>; + }; + + pdm_m2_sdi2: pdm-m2-sdi2 { + rockchip,pins = + <2 RK_PB7 2 &pcfg_pull_none>; + }; + + pdm_m2_sdi3: pdm-m2-sdi3 { + rockchip,pins = + <2 RK_PC0 2 &pcfg_pull_none>; + }; + }; + + pwm0 { + pwm0_pin: pwm0-pin { + rockchip,pins = + <0 RK_PB5 1 &pcfg_pull_none>; + }; + + pwm0_pin_pull_down: pwm0-pin-pull-down { + rockchip,pins = + <0 RK_PB5 1 &pcfg_pull_down>; + }; + }; + + pwm1 { + pwm1_pin: pwm1-pin { + rockchip,pins = + <0 RK_PB6 1 &pcfg_pull_none>; + }; + + pwm1_pin_pull_down: pwm1-pin-pull-down { + rockchip,pins = + <0 RK_PB6 1 &pcfg_pull_down>; + }; + }; + + pwm2 { + pwm2_pin: pwm2-pin { + rockchip,pins = + <0 RK_PB7 1 &pcfg_pull_none>; + }; + + pwm2_pin_pull_down: pwm2-pin-pull-down { + rockchip,pins = + <0 RK_PB7 1 &pcfg_pull_down>; + }; + }; + + pwm3 { + pwm3_pin: pwm3-pin { + rockchip,pins = + <0 RK_PC0 1 &pcfg_pull_none>; + }; + + pwm3_pin_pull_down: pwm3-pin-pull-down { + rockchip,pins = + <0 RK_PC0 1 &pcfg_pull_down>; + }; + }; + + pwm4 { + pwm4_pin: pwm4-pin { + rockchip,pins = + <0 RK_PA1 2 &pcfg_pull_none>; + }; + + pwm4_pin_pull_down: pwm4-pin-pull-down { + rockchip,pins = + <0 RK_PA1 2 &pcfg_pull_down>; + }; + }; + + pwm5 { + pwm5_pin: pwm5-pin { + rockchip,pins = + <0 RK_PC1 2 &pcfg_pull_none>; + }; + + pwm5_pin_pull_down: pwm5-pin-pull-down { + rockchip,pins = + <0 RK_PC1 2 &pcfg_pull_down>; + }; + }; + + pwm6 { + pwm6_pin: pwm6-pin { + rockchip,pins = + <0 RK_PC2 2 &pcfg_pull_none>; + }; + + pwm6_pin_pull_down: pwm6-pin-pull-down { + rockchip,pins = + <0 RK_PC2 2 &pcfg_pull_down>; + }; + }; + + pwm7 { + pwm7_pin: pwm7-pin { + rockchip,pins = + <2 RK_PB0 2 &pcfg_pull_none>; + }; + + pwm7_pin_pull_down: pwm7-pin-pull-down { + rockchip,pins = + <2 RK_PB0 2 &pcfg_pull_down>; + }; + }; + + pwm8 { + pwm8_pin: pwm8-pin { + rockchip,pins = + <2 RK_PB2 2 &pcfg_pull_none>; + }; + + pwm8_pin_pull_down: pwm8-pin-pull-down { + rockchip,pins = + <2 RK_PB2 2 &pcfg_pull_down>; + }; + }; + + pwm9 { + pwm9_pin: pwm9-pin { + rockchip,pins = + <2 RK_PB3 2 &pcfg_pull_none>; + }; + + pwm9_pin_pull_down: pwm9-pin-pull-down { + rockchip,pins = + <2 RK_PB3 2 &pcfg_pull_down>; + }; + }; + + pwm10 { + pwm10_pin: pwm10-pin { + rockchip,pins = + <2 RK_PB4 2 &pcfg_pull_none>; + }; + + pwm10_pin_pull_down: pwm10-pin-pull-down { + rockchip,pins = + <2 RK_PB4 2 &pcfg_pull_down>; + }; + }; + + pwm11 { + pwm11_pin: pwm11-pin { + rockchip,pins = + <2 RK_PC0 4 &pcfg_pull_none>; + }; + + pwm11_pin_pull_down: pwm11-pin-pull-down { + rockchip,pins = + <2 RK_PC0 4 &pcfg_pull_down>; + }; + }; + + rtc { + rtc_32k: rtc-32k { + rockchip,pins = + <0 RK_PC3 1 &pcfg_pull_none>; + }; + }; + + sdmmc { + sdmmc_clk: sdmmc-clk { + rockchip,pins = + <4 RK_PD5 1 &pcfg_pull_none_4ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = + <4 RK_PD4 1 &pcfg_pull_up_4ma>; + }; + + sdmmc_det: sdmmc-det { + rockchip,pins = + <0 RK_PA3 1 &pcfg_pull_up_4ma>; + }; + + sdmmc_pwren: sdmmc-pwren { + rockchip,pins = + <4 RK_PD6 1 &pcfg_pull_none_4ma>; + }; + + sdmmc_bus1: sdmmc-bus1 { + rockchip,pins = + <4 RK_PD0 1 &pcfg_pull_up_4ma>; + }; + + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = + <4 RK_PD0 1 &pcfg_pull_up_4ma>, + <4 RK_PD1 1 &pcfg_pull_up_4ma>, + <4 RK_PD2 1 &pcfg_pull_up_4ma>, + <4 RK_PD3 1 &pcfg_pull_up_4ma>; + }; + }; + + sdio { + sdio_clk: sdio-clk { + rockchip,pins = + <4 RK_PA5 1 &pcfg_pull_none_8ma>; + }; + + sdio_cmd: sdio-cmd { + rockchip,pins = + <4 RK_PA4 1 &pcfg_pull_up_8ma>; + }; + + sdio_pwren: sdio-pwren { + rockchip,pins = + <0 RK_PA2 1 &pcfg_pull_none_8ma>; + }; + + sdio_wrpt: sdio-wrpt { + rockchip,pins = + <0 RK_PA1 1 &pcfg_pull_none_8ma>; + }; + + sdio_intn: sdio-intn { + rockchip,pins = + <0 RK_PA0 1 &pcfg_pull_none_8ma>; + }; + + sdio_bus1: sdio-bus1 { + rockchip,pins = + <4 RK_PA0 1 &pcfg_pull_up_8ma>; + }; + + sdio_bus4: sdio-bus4 { + rockchip,pins = + <4 RK_PA0 1 &pcfg_pull_up_8ma>, + <4 RK_PA1 1 &pcfg_pull_up_8ma>, + <4 RK_PA2 1 &pcfg_pull_up_8ma>, + <4 RK_PA3 1 &pcfg_pull_up_8ma>; + }; + }; + + spdif_in { + spdif_in: spdif-in { + rockchip,pins = + <0 RK_PC2 1 &pcfg_pull_none>; + }; + }; + + spdif_out { + spdif_out: spdif-out { + rockchip,pins = + <0 RK_PC1 1 &pcfg_pull_none>; + }; + }; + + spi0 { + spi0_clk: spi0-clk { + rockchip,pins = + <2 RK_PA2 2 &pcfg_pull_up_4ma>; + }; + + spi0_csn0: spi0-csn0 { + rockchip,pins = + <2 RK_PA3 2 &pcfg_pull_up_4ma>; + }; + + spi0_miso: spi0-miso { + rockchip,pins = + <2 RK_PA0 2 &pcfg_pull_up_4ma>; + }; + + spi0_mosi: spi0-mosi { + rockchip,pins = + <2 RK_PA1 2 &pcfg_pull_up_4ma>; + }; + }; + + spi1 { + spi1_clk: spi1-clk { + rockchip,pins = + <3 RK_PB3 3 &pcfg_pull_up_4ma>; + }; + + spi1_csn0: spi1-csn0 { + rockchip,pins = + <3 RK_PB5 3 &pcfg_pull_up_4ma>; + }; + + spi1_miso: spi1-miso { + rockchip,pins = + <3 RK_PB2 3 &pcfg_pull_up_4ma>; + }; + + spi1_mosi: spi1-mosi { + rockchip,pins = + <3 RK_PB4 3 &pcfg_pull_up_4ma>; + }; + }; + + spi1-m1 { + spi1m1_miso: spi1m1-miso { + rockchip,pins = + <2 RK_PA4 2 &pcfg_pull_up_4ma>; + }; + + spi1m1_mosi: spi1m1-mosi { + rockchip,pins = + <2 RK_PA5 2 &pcfg_pull_up_4ma>; + }; + + spi1m1_clk: spi1m1-clk { + rockchip,pins = + <2 RK_PA7 2 &pcfg_pull_up_4ma>; + }; + + spi1m1_csn0: spi1m1-csn0 { + rockchip,pins = + <2 RK_PB1 2 &pcfg_pull_up_4ma>; + }; + }; + + spi2 { + spi2_clk: spi2-clk { + rockchip,pins = + <1 RK_PD0 3 &pcfg_pull_up_4ma>; + }; + + spi2_csn0: spi2-csn0 { + rockchip,pins = + <1 RK_PD1 3 &pcfg_pull_up_4ma>; + }; + + spi2_miso: spi2-miso { + rockchip,pins = + <1 RK_PC6 3 &pcfg_pull_up_4ma>; + }; + + spi2_mosi: spi2-mosi { + rockchip,pins = + <1 RK_PC7 3 &pcfg_pull_up_4ma>; + }; + }; + + tsadc { + tsadc_otp_gpio: tsadc-otp-gpio { + rockchip,pins = + <0 RK_PB2 0 &pcfg_pull_none>; + }; + + tsadc_otp_out: tsadc-otp-out { + rockchip,pins = + <0 RK_PB2 1 &pcfg_pull_none>; + }; + }; + + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = + <2 RK_PA1 1 &pcfg_pull_up>, + <2 RK_PA0 1 &pcfg_pull_up>; + }; + + uart0_cts: uart0-cts { + rockchip,pins = + <2 RK_PA2 1 &pcfg_pull_none>; + }; + + uart0_rts: uart0-rts { + rockchip,pins = + <2 RK_PA3 1 &pcfg_pull_none>; + }; + + uart0_rts_gpio: uart0-rts-gpio { + rockchip,pins = + <2 RK_PA3 0 &pcfg_pull_none>; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = + <1 RK_PD1 1 &pcfg_pull_up>, + <1 RK_PD0 1 &pcfg_pull_up>; + }; + + uart1_cts: uart1-cts { + rockchip,pins = + <1 RK_PC6 1 &pcfg_pull_none>; + }; + + uart1_rts: uart1-rts { + rockchip,pins = + <1 RK_PC7 1 &pcfg_pull_none>; + }; + }; + + uart2-m0 { + uart2m0_xfer: uart2m0-xfer { + rockchip,pins = + <1 RK_PC7 2 &pcfg_pull_up>, + <1 RK_PC6 2 &pcfg_pull_up>; + }; + }; + + uart2-m1 { + uart2m1_xfer: uart2m1-xfer { + rockchip,pins = + <4 RK_PD3 2 &pcfg_pull_up>, + <4 RK_PD2 2 &pcfg_pull_up>; + }; + }; + + uart3 { + uart3_xfer: uart3-xfer { + rockchip,pins = + <3 RK_PB5 4 &pcfg_pull_up>, + <3 RK_PB4 4 &pcfg_pull_up>; + }; + }; + + uart3-m1 { + uart3m1_xfer: uart3m1-xfer { + rockchip,pins = + <0 RK_PC2 3 &pcfg_pull_up>, + <0 RK_PC1 3 &pcfg_pull_up>; + }; + }; + + uart4 { + uart4_xfer: uart4-xfer { + rockchip,pins = + <4 RK_PB1 1 &pcfg_pull_up>, + <4 RK_PB0 1 &pcfg_pull_up>; + }; + + uart4_cts: uart4-cts { + rockchip,pins = + <4 RK_PA6 1 &pcfg_pull_none>; + }; + + uart4_rts: uart4-rts { + rockchip,pins = + <4 RK_PA7 1 &pcfg_pull_none>; + }; + + uart4_rts_gpio: uart4-rts-gpio { + rockchip,pins = + <4 RK_PA7 0 &pcfg_pull_none>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts new file mode 100644 index 000000000000..76b49f573101 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts @@ -0,0 +1,359 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) +// Copyright (c) 2017-2019 Arm Ltd. + +/dts-v1/; +#include "rk3328.dtsi" + +/ { + model = "Beelink A1"; + compatible = "azw,beelink-a1", "rockchip,rk3328"; + + /* + * UART pins, as viewed with bottom of case removed: + * + * Front + * /------- + * L / o <- Gnd + * e / o <-- Rx + * f / o <--- Tx + * t / o <---- +3.3v + * | + */ + chosen { + stdout-path = "serial2:1500000n8"; + }; + + gmac_clkin: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac_clkin"; + #clock-cells = <0>; + }; + + vcc_host_5v: usb3-current-switch { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb30_host_drv>; + regulator-name = "vcc_host_5v"; + vin-supply = <&vcc_sys>; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>; + }; +}; + +&analog_sound { + simple-audio-card,name = "Analog A/V"; + status = "okay"; +}; + +&codec { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + no-sd; + no-sdio; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc18_emmc>; + status = "okay"; +}; + +&gmac2io { + assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; + assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>; + clock_in_out = "input"; + phy-handle = <&rtl8211f>; + phy-mode = "rgmii"; + phy-supply = <&vcc_io>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmiim1_pins>; + snps,aal; + snps,pbl = <0x4>; + tx_delay = <0x26>; + rx_delay = <0x11>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + rtl8211f: phy@0 { + reg = <0>; + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpu { + mali-supply = <&vdd_logic>; +}; + +&hdmi { + status = "okay"; +}; + +&hdmiphy { + status = "okay"; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c1 { + clock-frequency = <1000000>; + i2c-scl-falling-time-ns = <5>; + i2c-scl-rising-time-ns = <83>; + status = "okay"; + + pmic@18 { + compatible = "rockchip,rk805"; + reg = <0x18>; + interrupt-parent = <&gpio2>; + interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_io>; + vcc6-supply = <&vcc_io>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_18: LDO_REG1 { + regulator-name = "vdd_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc18_emmc: LDO_REG2 { + regulator-name = "vcc_18emmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_11: LDO_REG3 { + regulator-name = "vdd_11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1100000>; + }; + }; + }; + }; +}; + +&i2s0 { + status = "okay"; +}; + +&i2s1 { + status = "okay"; +}; + +&io_domains { + vccio1-supply = <&vcc_io>; + vccio2-supply = <&vcc18_emmc>; + vccio3-supply = <&vcc_io>; + vccio4-supply = <&vdd_18>; + vccio5-supply = <&vcc_io>; + vccio6-supply = <&vdd_18>; + pmuio-supply = <&vcc_io>; + status = "okay"; +}; + +&pinctrl { + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb3 { + usb30_host_drv: usb30-host-drv { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + bt_dis: bt-dis { + rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_output_low>; + }; + + bt_wake_host: bt-wake-host { + rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + chip_en: chip-en { + rockchip,pins = <2 RK_PC3 RK_FUNC_GPIO &pcfg_output_low>; + }; + + host_wake_bt: host-wake-bt { + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_output_high>; + }; + + wl_dis: wl-dis { + rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_output_low>; + }; + + wl_wake_host: wl-wake-host { + rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc_io>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <0>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&u2phy { + status = "okay"; +}; + +&u2phy_host { + status = "okay"; +}; + +&u2phy_otg { + status = "okay"; +}; + +&usb20_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usb_host0_ehci { + pinctrl-names = "default"; + pinctrl-0 = <&bt_dis &bt_wake_host &chip_en &host_wake_bt &wl_dis &wl_wake_host>; + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts index bb40c163b05d..8d553c92182a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts @@ -35,6 +35,7 @@ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc0m1_gpio>; + regulator-boot-on; regulator-name = "vcc_sd"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 31cc1541f1f5..91306ebed4da 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -142,6 +142,22 @@ }; }; + analog_sound: analog-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,name = "Analog"; + status = "disabled"; + + simple-audio-card,cpu { + sound-dai = <&i2s1>; + }; + + simple-audio-card,codec { + sound-dai = <&codec>; + }; + }; + arm-pmu { compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, @@ -156,6 +172,22 @@ ports = <&vop_out>; }; + hdmi_sound: hdmi-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <128>; + simple-audio-card,name = "HDMI"; + status = "disabled"; + + simple-audio-card,cpu { + sound-dai = <&i2s0>; + }; + + simple-audio-card,codec { + sound-dai = <&hdmi>; + }; + }; + psci { compatible = "arm,psci-1.0", "arm,psci-0.2"; method = "smc"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts index a9f4d6d7d2b7..9dd3b171e91d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts @@ -68,6 +68,16 @@ &spi0 { status = "okay"; + + cr50@0 { + compatible = "google,cr50"; + reg = <0>; + interrupt-parent = <&gpio0>; + interrupts = <5 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&h1_int_od_l>; + spi-max-frequency = <800000>; + }; }; &pinctrl { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi index 50dfab51f175..4373ed732af7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi @@ -436,6 +436,16 @@ camera: &i2c7 { &spi2 { status = "okay"; + + cr50@0 { + compatible = "google,cr50"; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <17 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&h1_int_od_l>; + spi-max-frequency = <800000>; + }; }; &usb_host0_ohci { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi index dd16c80d923e..b788ae4f47f0 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi @@ -152,9 +152,6 @@ phy-handle = <&rtl8211e>; phy-mode = "rgmii"; phy-supply = <&vcc3v3_s3>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 30000>; - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; tx_delay = <0x28>; rx_delay = <0x11>; status = "okay"; @@ -168,6 +165,9 @@ reg = <1>; interrupt-parent = <&gpio3>; interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; }; }; }; @@ -184,6 +184,10 @@ status = "okay"; }; +&hdmi_sound { + status = "okay"; +}; + &i2c0 { clock-frequency = <400000>; i2c-scl-rising-time-ns = <160>; @@ -459,6 +463,10 @@ status = "okay"; }; +&i2s2 { + status = "okay"; +}; + &io_domains { bt656-supply = <&vcc_1v8>; audio-supply = <&vcca1v8_codec>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 62ea288a1a70..c1edca3872c7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -165,6 +165,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &i2c0 { status = "okay"; i2c-scl-rising-time-ns = <168>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts new file mode 100644 index 000000000000..d6b3042cffa9 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd + * Copyright (c) 2019 Markus Reichl <m.reichl@fivetechno.de> + */ + +/dts-v1/; +#include "rk3399-roc-pc.dtsi" + +/ { + model = "Firefly ROC-RK3399-PC Mezzanine Board"; + compatible = "firefly,roc-rk3399-pc-mezzanine", "rockchip,rk3399"; + + vcc3v3_ngff: vcc3v3-ngff { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_ngff"; + enable-active-high; + gpio = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc3v3_ngff_en>; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; + + vcc3v3_pcie: vcc3v3-pcie { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie"; + enable-active-high; + gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc3v3_pcie_en>; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; +}; + +&pcie_phy { + status = "okay"; +}; + +&pcie0 { + ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; + num-lanes = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_perst>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pinctrl { + ngff { + vcc3v3_ngff_en: vcc3v3-ngff-en { + rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + vcc3v3_pcie_en: vcc3v3-pcie-en { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie_perst: pcie-perst { + rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts index 19f7732d728c..cd4195425309 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts @@ -4,677 +4,9 @@ */ /dts-v1/; -#include <dt-bindings/pwm/pwm.h> -#include "rk3399.dtsi" -#include "rk3399-opp.dtsi" +#include "rk3399-roc-pc.dtsi" / { model = "Firefly ROC-RK3399-PC Board"; compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399"; - - chosen { - stdout-path = "serial2:1500000n8"; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm0 0 25000 0>; - }; - - clkin_gmac: external-gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "clkin_gmac"; - #clock-cells = <0>; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&rk808 1>; - clock-names = "ext_clock"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h>; - - /* - * On the module itself this is one of these (depending - * on the actual card populated): - * - SDIO_RESET_L_WL_REG_ON - * - PDN (power down when low) - */ - reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; - }; - - vcc_vbus_typec0: vcc-vbus-typec0 { - compatible = "regulator-fixed"; - regulator-name = "vcc_vbus_typec0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - /* - * should be placed inside mp8859, but not until mp8859 has - * its own dt-binding. - */ - vcc12v_sys: mp8859-dcdc1 { - compatible = "regulator-fixed"; - regulator-name = "vcc12v_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - vin-supply = <&vcc_vbus_typec0>; - }; - - /* switched by pmic_sleep */ - vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { - compatible = "regulator-fixed"; - regulator-name = "vcc1v8_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_1v8>; - }; - - vcc3v3_sys: vcc3v3-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc12v_sys>; - }; - - /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ - vcc5v0_host: vcc5v0-host-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_host_en &hub_rst>; - regulator-name = "vcc5v0_host"; - regulator-always-on; - vin-supply = <&vcc_sys>; - }; - - vcc_vbus_typec1: vcc-vbus-typec1 { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc_vbus_typec1_en>; - regulator-name = "vcc_vbus_typec1"; - regulator-always-on; - vin-supply = <&vcc_sys>; - }; - - vcc_sys: vcc-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_sys>; - }; - - vdd_log: vdd-log { - compatible = "pwm-regulator"; - pwms = <&pwm2 0 25000 1>; - regulator-name = "vdd_log"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - vin-supply = <&vcc3v3_sys>; - }; -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l2 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l3 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_b0 { - cpu-supply = <&vdd_cpu_b>; -}; - -&cpu_b1 { - cpu-supply = <&vdd_cpu_b>; -}; - -&emmc_phy { - status = "okay"; -}; - -&gmac { - assigned-clocks = <&cru SCLK_RMII_SRC>; - assigned-clock-parents = <&clkin_gmac>; - clock_in_out = "input"; - phy-supply = <&vcc_lan>; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; - tx_delay = <0x28>; - rx_delay = <0x11>; - status = "okay"; -}; - -&hdmi { - ddc-i2c-bus = <&i2c3>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_cec>; - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - i2c-scl-rising-time-ns = <168>; - i2c-scl-falling-time-ns = <4>; - status = "okay"; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - interrupt-parent = <&gpio1>; - interrupts = <21 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk808-clkout2"; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; - rockchip,system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc3v3_sys>; - vcc2-supply = <&vcc3v3_sys>; - vcc3-supply = <&vcc3v3_sys>; - vcc4-supply = <&vcc3v3_sys>; - vcc6-supply = <&vcc3v3_sys>; - vcc7-supply = <&vcc3v3_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc3v3_sys>; - vcc10-supply = <&vcc3v3_sys>; - vcc11-supply = <&vcc3v3_sys>; - vcc12-supply = <&vcc3v3_sys>; - vddio-supply = <&vcc1v8_pmu>; - - regulators { - vdd_center: DCDC_REG1 { - regulator-name = "vdd_center"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_l: DCDC_REG2 { - regulator-name = "vdd_cpu_l"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG4 { - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcca1v8_codec: LDO_REG1 { - regulator-name = "vcca1v8_codec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc1v8_hdmi: LDO_REG2 { - regulator-name = "vcc1v8_hdmi"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc1v8_pmu: LDO_REG3 { - regulator-name = "vcc1v8_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc_sdio: LDO_REG4 { - regulator-name = "vcc_sdio"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcca3v0_codec: LDO_REG5 { - regulator-name = "vcca3v0_codec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v5: LDO_REG6 { - regulator-name = "vcc_1v5"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1500000>; - }; - }; - - vcca0v9_hdmi: LDO_REG7 { - regulator-name = "vcca0v9_hdmi"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v0: LDO_REG8 { - regulator-name = "vcc_3v0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcc3v3_s3: vcc_lan: SWITCH_REG1 { - regulator-name = "vcc3v3_s3"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_s0: SWITCH_REG2 { - regulator-name = "vcc3v3_s0"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; - - vdd_cpu_b: regulator@40 { - compatible = "silergy,syr827"; - reg = <0x40>; - fcs,suspend-voltage-selector = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&vsel1_gpio>; - regulator-name = "vdd_cpu_b"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc3v3_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: regulator@41 { - compatible = "silergy,syr828"; - reg = <0x41>; - fcs,suspend-voltage-selector = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&vsel2_gpio>; - regulator-name = "vdd_gpu"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc3v3_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; -}; - -&i2c1 { - i2c-scl-rising-time-ns = <300>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; -}; - -&i2c3 { - i2c-scl-rising-time-ns = <450>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; -}; - -&i2c4 { - i2c-scl-rising-time-ns = <600>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - - fusb1: usb-typec@22 { - compatible = "fcs,fusb302"; - reg = <0x22>; - interrupt-parent = <&gpio1>; - interrupts = <1 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&fusb1_int>; - vbus-supply = <&vcc_vbus_typec1>; - status = "okay"; - }; -}; - -&i2c7 { - i2c-scl-rising-time-ns = <600>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - - fusb0: usb-typec@22 { - compatible = "fcs,fusb302"; - reg = <0x22>; - interrupt-parent = <&gpio1>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&fusb0_int>; - vbus-supply = <&vcc_vbus_typec0>; - status = "okay"; - }; -}; - -&i2s0 { - rockchip,playback-channels = <8>; - rockchip,capture-channels = <8>; - status = "okay"; -}; - -&i2s1 { - rockchip,playback-channels = <2>; - rockchip,capture-channels = <2>; - status = "okay"; -}; - -&i2s2 { - status = "okay"; -}; - -&io_domains { - audio-supply = <&vcca1v8_codec>; - bt656-supply = <&vcc_3v0>; - gpio1830-supply = <&vcc_3v0>; - sdmmc-supply = <&vcc_sdio>; - status = "okay"; -}; - -&pmu_io_domains { - pmu1830-supply = <&vcc_3v0>; - status = "okay"; -}; - -&pinctrl { - lcd-panel { - lcd_panel_reset: lcd-panel-reset { - rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - pmic { - vsel1_gpio: vsel1-gpio { - rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - vsel2_gpio: vsel2-gpio { - rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - sdio-pwrseq { - wifi_enable_h: wifi-enable-h { - rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - usb2 { - vcc5v0_host_en: vcc5v0-host-en { - rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - hub_rst: hub-rst { - rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>; - }; - }; - - usb-typec { - vcc_vbus_typec1_en: vcc-vbus-typec1-en { - rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - fusb30x { - fusb0_int: fusb0-int { - rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - fusb1_int: fusb1-int { - rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; -}; - -&pwm0 { - status = "okay"; -}; - -&pwm2 { - status = "okay"; -}; - -&saradc { - vref-supply = <&vcca1v8_s3>; - status = "okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; - disable-wp; - max-frequency = <150000000>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; - non-removable; - status = "okay"; -}; - -&tcphy0 { - status = "okay"; -}; - -&tcphy1 { - status = "okay"; -}; - -&tsadc { - /* tshut mode 0:CRU 1:GPIO */ - rockchip,hw-tshut-mode = <1>; - /* tshut polarity 0:LOW 1:HIGH */ - rockchip,hw-tshut-polarity = <1>; - status = "okay"; -}; - -&u2phy0 { - status = "okay"; - - u2phy0_otg: otg-port { - phy-supply = <&vcc_vbus_typec0>; - status = "okay"; - }; - - u2phy0_host: host-port { - phy-supply = <&vcc5v0_host>; - status = "okay"; - }; -}; - -&u2phy1 { - status = "okay"; - - u2phy1_otg: otg-port { - phy-supply = <&vcc_vbus_typec1>; - status = "okay"; - }; - - u2phy1_host: host-port { - phy-supply = <&vcc5v0_host>; - status = "okay"; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts>; - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usbdrd3_0 { - status = "okay"; -}; - -&usbdrd_dwc3_0 { - status = "okay"; -}; - -&usbdrd3_1 { - status = "okay"; -}; - -&usbdrd_dwc3_1 { - status = "okay"; - dr_mode = "host"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi new file mode 100644 index 000000000000..7e07dae33d0f --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi @@ -0,0 +1,767 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd + */ + +/dts-v1/; +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pwm/pwm.h> +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + model = "Firefly ROC-RK3399-PC Board"; + compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 25000 0>; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1500000>; + poll-interval = <100>; + + recovery { + label = "Recovery"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <18000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key_l>; + + power { + debounce-interval = <100>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + label = "GPIO Key Power"; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>, <&yellow_led_gpio>; + + work-led { + label = "green:work"; + gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + diy-led { + label = "red:diy"; + gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "mmc1"; + }; + + yellow-led { + label = "yellow:yellow-led"; + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "mmc0"; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + + vcc_vbus_typec0: vcc-vbus-typec0 { + compatible = "regulator-fixed"; + regulator-name = "vcc_vbus_typec0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + /* + * should be placed inside mp8859, but not until mp8859 has + * its own dt-binding. + */ + dc_12v: mp8859-dcdc1 { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <&vcc_vbus_typec0>; + }; + + /* switched by pmic_sleep */ + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; + + /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en &hub_rst>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vcc_vbus_typec1: vcc-vbus-typec1 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc_vbus_typec1_en>; + regulator-name = "vcc_vbus_typec1"; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc_sys_en>; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + vin-supply = <&vcc3v3_sys>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + vcc10-supply = <&vcc3v3_sys>; + vcc11-supply = <&vcc3v3_sys>; + vcc12-supply = <&vcc3v3_sys>; + vcc13-supply = <&vcc3v3_sys>; + vcc14-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_3v0>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_codec: LDO_REG1 { + regulator-name = "vcca1v8_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_hdmi: LDO_REG2 { + regulator-name = "vcc1v8_hdmi"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_pmu: LDO_REG3 { + regulator-name = "vcc1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sdio: LDO_REG4 { + regulator-name = "vcc_sdio"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca0v9_hdmi: LDO_REG7 { + regulator-name = "vcca0v9_hdmi"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: vcc_lan: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel1_gpio>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel2_gpio>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c1 { + i2c-scl-rising-time-ns = <300>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c4 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + + fusb1: usb-typec@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&fusb1_int>; + vbus-supply = <&vcc_vbus_typec1>; + status = "okay"; + }; +}; + +&i2c7 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + + fusb0: usb-typec@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&fusb0_int>; + vbus-supply = <&vcc_vbus_typec0>; + status = "okay"; + }; +}; + +&i2s0 { + rockchip,playback-channels = <8>; + rockchip,capture-channels = <8>; + status = "okay"; +}; + +&i2s1 { + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; + status = "okay"; +}; + +&i2s2 { + status = "okay"; +}; + +&io_domains { + audio-supply = <&vcca1v8_codec>; + bt656-supply = <&vcc_3v0>; + gpio1830-supply = <&vcc_3v0>; + sdmmc-supply = <&vcc_sdio>; + status = "okay"; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc_3v0>; + status = "okay"; +}; + +&pinctrl { + buttons { + pwr_key_l: pwr-key-l { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + lcd-panel { + lcd_panel_reset: lcd-panel-reset { + rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + diy_led_gpio: diy_led-gpio { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + work_led_gpio: work_led-gpio { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + yellow_led_gpio: yellow_led-gpio { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + vsel1_gpio: vsel1-gpio { + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb2 { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc_sys_en: vcc-sys-en { + rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + hub_rst: hub-rst { + rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + usb-typec { + vcc_vbus_typec1_en: vcc-vbus-typec1-en { + rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + fusb30x { + fusb0_int: fusb0-int { + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + fusb1_int: fusb1-int { + rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca1v8_s3>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + phy-supply = <&vcc_vbus_typec0>; + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + phy-supply = <&vcc_vbus_typec1>; + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts index 1ae1ebd4efdd..188d9dfc297b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts @@ -486,21 +486,18 @@ sdio0 { sdio0_bus4: sdio0-bus4 { - rockchip,pins = - <2 20 RK_FUNC_1 &pcfg_pull_up_20ma>, - <2 21 RK_FUNC_1 &pcfg_pull_up_20ma>, - <2 22 RK_FUNC_1 &pcfg_pull_up_20ma>, - <2 23 RK_FUNC_1 &pcfg_pull_up_20ma>; + rockchip,pins = <2 RK_PC4 1 &pcfg_pull_up_20ma>, + <2 RK_PC5 1 &pcfg_pull_up_20ma>, + <2 RK_PC6 1 &pcfg_pull_up_20ma>, + <2 RK_PC7 1 &pcfg_pull_up_20ma>; }; sdio0_cmd: sdio0-cmd { - rockchip,pins = - <2 24 RK_FUNC_1 &pcfg_pull_up_20ma>; + rockchip,pins = <2 RK_PD0 1 &pcfg_pull_up_20ma>; }; sdio0_clk: sdio0-clk { - rockchip,pins = - <2 25 RK_FUNC_1 &pcfg_pull_none_20ma>; + rockchip,pins = <2 RK_PD1 1 &pcfg_pull_none_20ma>; }; }; @@ -532,8 +529,7 @@ wifi { wifi_enable_h: wifi-enable-h { - rockchip,pins = - <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; }; wifi_host_wake_l: wifi-host-wake-l { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts index e544deb61d28..7f4b2eba31d4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts @@ -81,6 +81,12 @@ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; }; + sound { + compatible = "audio-graph-card"; + label = "rockchip,rk3399"; + dais = <&i2s1_p0>; + }; + vcc12v_dcin: vcc12v-dcin { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin"; @@ -470,6 +476,20 @@ i2c-scl-rising-time-ns = <300>; i2c-scl-falling-time-ns = <15>; status = "okay"; + + es8316: codec@11 { + compatible = "everest,es8316"; + reg = <0x11>; + clocks = <&cru SCLK_I2S_8CH_OUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + + port { + es8316_p0_0: endpoint { + remote-endpoint = <&i2s1_p0_0>; + }; + }; + }; }; &i2c3 { @@ -505,6 +525,14 @@ rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; status = "okay"; + + i2s1_p0: port { + i2s1_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&es8316_p0_0>; + }; + }; }; &i2s2 { diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index cede1ad81be2..e62ea0e2b657 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -520,6 +520,7 @@ its: interrupt-controller@fee20000 { compatible = "arm,gic-v3-its"; msi-controller; + #msi-cells = <1>; reg = <0x0 0xfee20000 0x0 0x20000>; }; diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index 799c75fa7981..efb24579922c 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -419,6 +419,114 @@ reg = <0x00 0x30e00000 0x00 0x1000>; #hwlock-cells = <1>; }; + + mailbox0_cluster0: mailbox@31f80000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f80000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + mailbox0_cluster1: mailbox@31f81000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f81000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + mailbox0_cluster2: mailbox@31f82000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f82000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + mailbox0_cluster3: mailbox@31f83000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f83000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + mailbox0_cluster4: mailbox@31f84000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f84000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + mailbox0_cluster5: mailbox@31f85000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f85000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + mailbox0_cluster6: mailbox@31f86000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f86000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + mailbox0_cluster7: mailbox@31f87000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f87000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + mailbox0_cluster8: mailbox@31f88000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f88000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + mailbox0_cluster9: mailbox@31f89000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f89000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + mailbox0_cluster10: mailbox@31f8a000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f8a000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + mailbox0_cluster11: mailbox@31f8b000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f8b000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; }; main_gpio0: main_gpio0@600000 { diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index 1102b84f853d..8a85b482ad31 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -221,6 +221,7 @@ bus-width = <8>; non-removable; ti,driver-strength-ohm = <50>; + disable-wp; }; &dwc3_1 { @@ -280,3 +281,61 @@ &pcie1_ep { status = "disabled"; }; + +&mailbox0_cluster0 { + interrupts = <164 0>; + + mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { + ti,mbox-tx = <1 0 0>; + ti,mbox-rx = <0 0 0>; + }; +}; + +&mailbox0_cluster1 { + interrupts = <165 0>; + + mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { + ti,mbox-tx = <1 0 0>; + ti,mbox-rx = <0 0 0>; + }; +}; + +&mailbox0_cluster2 { + status = "disabled"; +}; + +&mailbox0_cluster3 { + status = "disabled"; +}; + +&mailbox0_cluster4 { + status = "disabled"; +}; + +&mailbox0_cluster5 { + status = "disabled"; +}; + +&mailbox0_cluster6 { + status = "disabled"; +}; + +&mailbox0_cluster7 { + status = "disabled"; +}; + +&mailbox0_cluster8 { + status = "disabled"; +}; + +&mailbox0_cluster9 { + status = "disabled"; +}; + +&mailbox0_cluster10 { + status = "disabled"; +}; + +&mailbox0_cluster11 { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts index d2894d55fbbe..2a3cd6174504 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts @@ -41,6 +41,32 @@ J721E_IOPAD(0x0, PIN_INPUT, 7) /* (AC18) EXTINTn.GPIO0_0 */ >; }; + + main_mmc1_pins_default: main_mmc1_pins_default { + pinctrl-single,pins = < + J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */ + J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */ + J721E_IOPAD(0x2ac, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */ + J721E_IOPAD(0x24c, PIN_INPUT, 0) /* (R24) MMC1_DAT0 */ + J721E_IOPAD(0x248, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */ + J721E_IOPAD(0x244, PIN_INPUT, 0) /* (R25) MMC1_DAT2 */ + J721E_IOPAD(0x240, PIN_INPUT, 0) /* (R26) MMC1_DAT3 */ + J721E_IOPAD(0x258, PIN_INPUT, 0) /* (P23) MMC1_SDCD */ + J721E_IOPAD(0x25c, PIN_INPUT, 0) /* (R28) MMC1_SDWP */ + >; + }; + + main_usbss0_pins_default: main_usbss0_pins_default { + pinctrl-single,pins = < + J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */ + >; + }; + + main_usbss1_pins_default: main_usbss1_pins_default { + pinctrl-single,pins = < + J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */ + >; + }; }; &wkup_pmx0 { @@ -117,3 +143,139 @@ &wkup_gpio1 { status = "disabled"; }; + +&mailbox0_cluster0 { + interrupts = <214 0>; + + mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster1 { + interrupts = <215 0>; + + mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster2 { + interrupts = <216 0>; + + mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster3 { + interrupts = <217 0>; + + mbox_c66_0: mbox-c66-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_c66_1: mbox-c66-1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster4 { + interrupts = <218 0>; + + mbox_c71_0: mbox-c71-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; +}; + +&mailbox0_cluster5 { + status = "disabled"; +}; + +&mailbox0_cluster6 { + status = "disabled"; +}; + +&mailbox0_cluster7 { + status = "disabled"; +}; + +&mailbox0_cluster8 { + status = "disabled"; +}; + +&mailbox0_cluster9 { + status = "disabled"; +}; + +&mailbox0_cluster10 { + status = "disabled"; +}; + +&mailbox0_cluster11 { + status = "disabled"; +}; + +&main_sdhci0 { + /* eMMC */ + non-removable; + ti,driver-strength-ohm = <50>; + disable-wp; +}; + +&main_sdhci1 { + /* SD/MMC */ + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_pins_default>; + ti,driver-strength-ohm = <50>; + disable-wp; +}; + +&main_sdhci2 { + /* Unused */ + status = "disabled"; +}; + +&usbss0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_usbss0_pins_default>; + ti,usb2-only; + ti,vbus-divider; +}; + +&usb0 { + dr_mode = "otg"; + maximum-speed = "high-speed"; +}; + +&usbss1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_usbss1_pins_default>; + ti,usb2-only; +}; + +&usb1 { + dr_mode = "host"; + maximum-speed = "high-speed"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index 698ef9a1d5b7..1e4c2b78d66d 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -95,6 +95,114 @@ reg = <0x00 0x30e00000 0x00 0x1000>; #hwlock-cells = <1>; }; + + mailbox0_cluster0: mailbox@31f80000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f80000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster1: mailbox@31f81000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f81000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster2: mailbox@31f82000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f82000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster3: mailbox@31f83000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f83000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster4: mailbox@31f84000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f84000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster5: mailbox@31f85000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f85000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster6: mailbox@31f86000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f86000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster7: mailbox@31f87000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f87000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster8: mailbox@31f88000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f88000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster9: mailbox@31f89000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f89000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster10: mailbox@31f8a000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f8a000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster11: mailbox@31f8b000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f8b000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; }; secure_proxy_main: mailbox@32c00000 { @@ -378,4 +486,114 @@ clocks = <&k3_clks 112 0>; clock-names = "gpio"; }; + + main_sdhci0: sdhci@4f80000 { + compatible = "ti,j721e-sdhci-8bit"; + reg = <0x0 0x4f80000 0x0 0x1000>, <0x0 0x4f88000 0x0 0x400>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&k3_clks 91 1>, <&k3_clks 91 0>; + assigned-clocks = <&k3_clks 91 1>; + assigned-clock-parents = <&k3_clks 91 2>; + bus-width = <8>; + mmc-hs400-1_8v; + mmc-ddr-1_8v; + ti,otap-del-sel = <0x2>; + ti,trm-icp = <0x8>; + ti,strobe-sel = <0x77>; + dma-coherent; + }; + + main_sdhci1: sdhci@4fb0000 { + compatible = "ti,j721e-sdhci-4bit"; + reg = <0x0 0x04fb0000 0x0 0x1000>, <0x0 0x4fb8000 0x0 0x400>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 92 TI_SCI_PD_EXCLUSIVE>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&k3_clks 92 0>, <&k3_clks 92 5>; + assigned-clocks = <&k3_clks 92 0>; + assigned-clock-parents = <&k3_clks 92 1>; + ti,otap-del-sel = <0x2>; + ti,trm-icp = <0x8>; + ti,clkbuf-sel = <0x7>; + dma-coherent; + no-1-8-v; + }; + + main_sdhci2: sdhci@4f98000 { + compatible = "ti,j721e-sdhci-4bit"; + reg = <0x0 0x4f98000 0x0 0x1000>, <0x0 0x4f90000 0x0 0x400>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 93 TI_SCI_PD_EXCLUSIVE>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&k3_clks 93 0>, <&k3_clks 93 5>; + assigned-clocks = <&k3_clks 93 0>; + assigned-clock-parents = <&k3_clks 93 1>; + ti,otap-del-sel = <0x2>; + ti,trm-icp = <0x8>; + ti,clkbuf-sel = <0x7>; + dma-coherent; + no-1-8-v; + }; + + usbss0: cdns_usb@4104000 { + compatible = "ti,j721e-usb"; + reg = <0x00 0x4104000 0x00 0x100>; + dma-coherent; + power-domains = <&k3_pds 288 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 288 15>, <&k3_clks 288 3>; + clock-names = "ref", "lpm"; + assigned-clocks = <&k3_clks 288 15>; /* USB2_REFCLK */ + assigned-clock-parents = <&k3_clks 288 16>; /* HFOSC0 */ + #address-cells = <2>; + #size-cells = <2>; + ranges; + + usb0: usb@6000000 { + compatible = "cdns,usb3"; + reg = <0x00 0x6000000 0x00 0x10000>, + <0x00 0x6010000 0x00 0x10000>, + <0x00 0x6020000 0x00 0x10000>; + reg-names = "otg", "xhci", "dev"; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */ + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; /* otgirq.0 */ + interrupt-names = "host", + "peripheral", + "otg"; + maximum-speed = "super-speed"; + dr_mode = "otg"; + }; + }; + + usbss1: cdns_usb@4114000 { + compatible = "ti,j721e-usb"; + reg = <0x00 0x4114000 0x00 0x100>; + dma-coherent; + power-domains = <&k3_pds 289 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 289 15>, <&k3_clks 289 3>; + clock-names = "ref", "lpm"; + assigned-clocks = <&k3_clks 289 15>; /* USB2_REFCLK */ + assigned-clock-parents = <&k3_clks 289 16>; /* HFOSC0 */ + #address-cells = <2>; + #size-cells = <2>; + ranges; + + usb1: usb@6400000 { + compatible = "cdns,usb3"; + reg = <0x00 0x6400000 0x00 0x10000>, + <0x00 0x6410000 0x00 0x10000>, + <0x00 0x6420000 0x00 0x10000>; + reg-names = "otg", "xhci", "dev"; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */ + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; /* otgirq.0 */ + interrupt-names = "host", + "peripheral", + "otg"; + maximum-speed = "super-speed"; + dr_mode = "otg"; + }; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi index 43ea1ba97922..ee5470edb435 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi @@ -127,6 +127,8 @@ <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */ <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */ <0x00 0x00A40000 0x00 0x00A40000 0x00 0x00000800>, /* timesync router */ + <0x00 0x06000000 0x00 0x06000000 0x00 0x00400000>, /* USBSS0 */ + <0x00 0x06400000 0x00 0x06400000 0x00 0x00400000>, /* USBSS1 */ <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */ <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */ <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/ diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 9aa67340a4d8..3c731e73903a 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -115,6 +115,27 @@ method = "smc"; }; + firmware { + zynqmp_firmware: zynqmp-firmware { + compatible = "xlnx,zynqmp-firmware"; + method = "smc"; + + nvmem_firmware { + compatible = "xlnx,zynqmp-nvmem-fw"; + #address-cells = <1>; + #size-cells = <1>; + + soc_revision: soc_revision@0 { + reg = <0x0 0x4>; + }; + }; + + zynqmp_pcap: pcap { + compatible = "xlnx,zynqmp-pcap-fpga"; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupt-parent = <&gic>; @@ -124,6 +145,14 @@ <1 10 0xf08>; }; + fpga_full: fpga-full { + compatible = "fpga-region"; + fpga-mgr = <&zynqmp_pcap>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + }; + amba_apu: amba-apu@0 { compatible = "simple-bus"; #address-cells = <2>; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index c9a867ac32d4..47d1b8fb1969 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -29,6 +29,7 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_ALL=y # CONFIG_COMPAT_BRK is not set CONFIG_PROFILING=y +CONFIG_ARCH_ACTIONS=y CONFIG_ARCH_AGILEX=y CONFIG_ARCH_SUNXI=y CONFIG_ARCH_ALPINE=y @@ -48,6 +49,7 @@ CONFIG_ARCH_MXC=y CONFIG_ARCH_QCOM=y CONFIG_ARCH_RENESAS=y CONFIG_ARCH_ROCKCHIP=y +CONFIG_ARCH_S32=y CONFIG_ARCH_SEATTLE=y CONFIG_ARCH_STRATIX10=y CONFIG_ARCH_SYNQUACER=y @@ -71,6 +73,7 @@ CONFIG_COMPAT=y CONFIG_RANDOMIZE_BASE=y CONFIG_HIBERNATION=y CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y +CONFIG_ENERGY_MODEL=y CONFIG_ARM_CPUIDLE=y CONFIG_ARM_PSCI_CPUIDLE=y CONFIG_CPU_FREQ=y @@ -90,6 +93,7 @@ CONFIG_ARM_TEGRA186_CPUFREQ=y CONFIG_ARM_SCPI_PROTOCOL=y CONFIG_RASPBERRYPI_FIRMWARE=y CONFIG_INTEL_STRATIX10_SERVICE=y +CONFIG_INTEL_STRATIX10_RSU=m CONFIG_TI_SCI_PROTOCOL=y CONFIG_EFI_CAPSULE_LOADER=y CONFIG_IMX_SCU=y @@ -114,6 +118,8 @@ CONFIG_CRYPTO_AES_ARM64_CE_CCM=y CONFIG_CRYPTO_AES_ARM64_CE_BLK=y CONFIG_CRYPTO_CHACHA20_NEON=m CONFIG_CRYPTO_AES_ARM64_BS=m +CONFIG_CRYPTO_DEV_ALLWINNER=y +CONFIG_CRYPTO_DEV_SUN8I_CE=m CONFIG_JUMP_LABEL=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y @@ -211,6 +217,7 @@ CONFIG_MTD_NAND_DENALI_DT=y CONFIG_MTD_NAND_MARVELL=y CONFIG_MTD_NAND_QCOM=y CONFIG_MTD_SPI_NOR=y +CONFIG_SPI_CADENCE_QUADSPI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=m CONFIG_VIRTIO_BLK=y @@ -285,7 +292,7 @@ CONFIG_SNI_AVE=y CONFIG_SNI_NETSEC=y CONFIG_STMMAC_ETH=m CONFIG_MDIO_BUS_MUX_MMIOREG=y -CONFIG_AT803X_PHY=m +CONFIG_AT803X_PHY=y CONFIG_MARVELL_PHY=m CONFIG_MARVELL_10G_PHY=m CONFIG_MESON_GXL_PHY=m @@ -314,6 +321,7 @@ CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_ADC=m CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_SNVS_PWRKEY=m +CONFIG_KEYBOARD_IMX_SC_KEY=m CONFIG_KEYBOARD_CROS_EC=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=m @@ -352,6 +360,8 @@ CONFIG_SERIAL_XILINX_PS_UART=y CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y CONFIG_SERIAL_FSL_LPUART=y CONFIG_SERIAL_FSL_LPUART_CONSOLE=y +CONFIG_SERIAL_FSL_LINFLEXUART=y +CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE=y CONFIG_SERIAL_MVEBU_UART=y CONFIG_SERIAL_DEV_BUS=y CONFIG_VIRTIO_CONSOLE=y @@ -411,6 +421,7 @@ CONFIG_PINCTRL_QDF2XXX=y CONFIG_PINCTRL_QCOM_SPMI_PMIC=y CONFIG_PINCTRL_SDM845=y CONFIG_PINCTRL_SM8150=y +CONFIG_GPIO_ALTERA=m CONFIG_GPIO_DWAPB=y CONFIG_GPIO_MB86S7X=y CONFIG_GPIO_PL061=y @@ -741,9 +752,11 @@ CONFIG_QCOM_SMD_RPM=y CONFIG_QCOM_SMP2P=y CONFIG_QCOM_SMSM=y CONFIG_ARCH_R8A774A1=y +CONFIG_ARCH_R8A774B1=y CONFIG_ARCH_R8A774C0=y CONFIG_ARCH_R8A7795=y CONFIG_ARCH_R8A7796=y +CONFIG_ARCH_R8A77961=y CONFIG_ARCH_R8A77965=y CONFIG_ARCH_R8A77970=y CONFIG_ARCH_R8A77980=y @@ -801,6 +814,7 @@ CONFIG_PHY_ROCKCHIP_TYPEC=y CONFIG_PHY_UNIPHIER_USB2=y CONFIG_PHY_UNIPHIER_USB3=y CONFIG_PHY_TEGRA_XUSB=y +CONFIG_ARM_SMMU_V3_PMU=m CONFIG_FSL_IMX8_DDR_PMU=m CONFIG_HISI_PMU=y CONFIG_QCOM_L2_PMU=y @@ -848,6 +862,7 @@ CONFIG_NLS_ISO8859_1=y CONFIG_SECURITY=y CONFIG_CRYPTO_ECHAINIV=y CONFIG_CRYPTO_ANSI_CPRNG=y +CONFIG_CRYPTO_DEV_HISI_ZIP=m CONFIG_DMA_CMA=y CONFIG_CMA_SIZE_MBYTES=32 CONFIG_PRINTK_TIME=y diff --git a/arch/arm64/crypto/Kconfig b/arch/arm64/crypto/Kconfig index 4922c4451e7c..b8eb0453123d 100644 --- a/arch/arm64/crypto/Kconfig +++ b/arch/arm64/crypto/Kconfig @@ -86,7 +86,7 @@ config CRYPTO_AES_ARM64_CE_CCM config CRYPTO_AES_ARM64_CE_BLK tristate "AES in ECB/CBC/CTR/XTS modes using ARMv8 Crypto Extensions" depends on KERNEL_MODE_NEON - select CRYPTO_BLKCIPHER + select CRYPTO_SKCIPHER select CRYPTO_AES_ARM64_CE select CRYPTO_AES_ARM64 select CRYPTO_SIMD @@ -94,7 +94,7 @@ config CRYPTO_AES_ARM64_CE_BLK config CRYPTO_AES_ARM64_NEON_BLK tristate "AES in ECB/CBC/CTR/XTS modes using NEON instructions" depends on KERNEL_MODE_NEON - select CRYPTO_BLKCIPHER + select CRYPTO_SKCIPHER select CRYPTO_AES_ARM64 select CRYPTO_LIB_AES select CRYPTO_SIMD @@ -102,8 +102,15 @@ config CRYPTO_AES_ARM64_NEON_BLK config CRYPTO_CHACHA20_NEON tristate "ChaCha20, XChaCha20, and XChaCha12 stream ciphers using NEON instructions" depends on KERNEL_MODE_NEON - select CRYPTO_BLKCIPHER - select CRYPTO_CHACHA20 + select CRYPTO_SKCIPHER + select CRYPTO_LIB_CHACHA_GENERIC + select CRYPTO_ARCH_HAVE_LIB_CHACHA + +config CRYPTO_POLY1305_NEON + tristate "Poly1305 hash function using scalar or NEON instructions" + depends on KERNEL_MODE_NEON + select CRYPTO_HASH + select CRYPTO_ARCH_HAVE_LIB_POLY1305 config CRYPTO_NHPOLY1305_NEON tristate "NHPoly1305 hash function using NEON instructions (for Adiantum)" @@ -113,7 +120,7 @@ config CRYPTO_NHPOLY1305_NEON config CRYPTO_AES_ARM64_BS tristate "AES in ECB/CBC/CTR/XTS modes using bit-sliced NEON algorithm" depends on KERNEL_MODE_NEON - select CRYPTO_BLKCIPHER + select CRYPTO_SKCIPHER select CRYPTO_AES_ARM64_NEON_BLK select CRYPTO_AES_ARM64 select CRYPTO_LIB_AES diff --git a/arch/arm64/crypto/Makefile b/arch/arm64/crypto/Makefile index 0435f2a0610e..d0901e610df3 100644 --- a/arch/arm64/crypto/Makefile +++ b/arch/arm64/crypto/Makefile @@ -50,6 +50,10 @@ sha512-arm64-y := sha512-glue.o sha512-core.o obj-$(CONFIG_CRYPTO_CHACHA20_NEON) += chacha-neon.o chacha-neon-y := chacha-neon-core.o chacha-neon-glue.o +obj-$(CONFIG_CRYPTO_POLY1305_NEON) += poly1305-neon.o +poly1305-neon-y := poly1305-core.o poly1305-glue.o +AFLAGS_poly1305-core.o += -Dpoly1305_init=poly1305_init_arm64 + obj-$(CONFIG_CRYPTO_NHPOLY1305_NEON) += nhpoly1305-neon.o nhpoly1305-neon-y := nh-neon-core.o nhpoly1305-neon-glue.o @@ -68,11 +72,15 @@ ifdef REGENERATE_ARM64_CRYPTO quiet_cmd_perlasm = PERLASM $@ cmd_perlasm = $(PERL) $(<) void $(@) +$(src)/poly1305-core.S_shipped: $(src)/poly1305-armv8.pl + $(call cmd,perlasm) + $(src)/sha256-core.S_shipped: $(src)/sha512-armv8.pl $(call cmd,perlasm) $(src)/sha512-core.S_shipped: $(src)/sha512-armv8.pl $(call cmd,perlasm) + endif -clean-files += sha256-core.S sha512-core.S +clean-files += poly1305-core.S sha256-core.S sha512-core.S diff --git a/arch/arm64/crypto/aes-neonbs-glue.c b/arch/arm64/crypto/aes-neonbs-glue.c index ea873b8904c4..e3e27349a9fe 100644 --- a/arch/arm64/crypto/aes-neonbs-glue.c +++ b/arch/arm64/crypto/aes-neonbs-glue.c @@ -384,7 +384,7 @@ static int __xts_crypt(struct skcipher_request *req, bool encrypt, goto xts_tail; kernel_neon_end(); - skcipher_walk_done(&walk, nbytes); + err = skcipher_walk_done(&walk, nbytes); } if (err || likely(!tail)) diff --git a/arch/arm64/crypto/chacha-neon-glue.c b/arch/arm64/crypto/chacha-neon-glue.c index 1495d2b18518..c1f9660d104c 100644 --- a/arch/arm64/crypto/chacha-neon-glue.c +++ b/arch/arm64/crypto/chacha-neon-glue.c @@ -1,5 +1,5 @@ /* - * ARM NEON accelerated ChaCha and XChaCha stream ciphers, + * ARM NEON and scalar accelerated ChaCha and XChaCha stream ciphers, * including ChaCha20 (RFC7539) * * Copyright (C) 2016 - 2017 Linaro, Ltd. <ard.biesheuvel@linaro.org> @@ -20,9 +20,10 @@ */ #include <crypto/algapi.h> -#include <crypto/chacha.h> +#include <crypto/internal/chacha.h> #include <crypto/internal/simd.h> #include <crypto/internal/skcipher.h> +#include <linux/jump_label.h> #include <linux/kernel.h> #include <linux/module.h> @@ -36,6 +37,8 @@ asmlinkage void chacha_4block_xor_neon(u32 *state, u8 *dst, const u8 *src, int nrounds, int bytes); asmlinkage void hchacha_block_neon(const u32 *state, u32 *out, int nrounds); +static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon); + static void chacha_doneon(u32 *state, u8 *dst, const u8 *src, int bytes, int nrounds) { @@ -59,6 +62,37 @@ static void chacha_doneon(u32 *state, u8 *dst, const u8 *src, } } +void hchacha_block_arch(const u32 *state, u32 *stream, int nrounds) +{ + if (!static_branch_likely(&have_neon) || !crypto_simd_usable()) { + hchacha_block_generic(state, stream, nrounds); + } else { + kernel_neon_begin(); + hchacha_block_neon(state, stream, nrounds); + kernel_neon_end(); + } +} +EXPORT_SYMBOL(hchacha_block_arch); + +void chacha_init_arch(u32 *state, const u32 *key, const u8 *iv) +{ + chacha_init_generic(state, key, iv); +} +EXPORT_SYMBOL(chacha_init_arch); + +void chacha_crypt_arch(u32 *state, u8 *dst, const u8 *src, unsigned int bytes, + int nrounds) +{ + if (!static_branch_likely(&have_neon) || bytes <= CHACHA_BLOCK_SIZE || + !crypto_simd_usable()) + return chacha_crypt_generic(state, dst, src, bytes, nrounds); + + kernel_neon_begin(); + chacha_doneon(state, dst, src, bytes, nrounds); + kernel_neon_end(); +} +EXPORT_SYMBOL(chacha_crypt_arch); + static int chacha_neon_stream_xor(struct skcipher_request *req, const struct chacha_ctx *ctx, const u8 *iv) { @@ -68,7 +102,7 @@ static int chacha_neon_stream_xor(struct skcipher_request *req, err = skcipher_walk_virt(&walk, req, false); - crypto_chacha_init(state, ctx, iv); + chacha_init_generic(state, ctx->key, iv); while (walk.nbytes > 0) { unsigned int nbytes = walk.nbytes; @@ -76,10 +110,17 @@ static int chacha_neon_stream_xor(struct skcipher_request *req, if (nbytes < walk.total) nbytes = rounddown(nbytes, walk.stride); - kernel_neon_begin(); - chacha_doneon(state, walk.dst.virt.addr, walk.src.virt.addr, - nbytes, ctx->nrounds); - kernel_neon_end(); + if (!static_branch_likely(&have_neon) || + !crypto_simd_usable()) { + chacha_crypt_generic(state, walk.dst.virt.addr, + walk.src.virt.addr, nbytes, + ctx->nrounds); + } else { + kernel_neon_begin(); + chacha_doneon(state, walk.dst.virt.addr, + walk.src.virt.addr, nbytes, ctx->nrounds); + kernel_neon_end(); + } err = skcipher_walk_done(&walk, walk.nbytes - nbytes); } @@ -91,9 +132,6 @@ static int chacha_neon(struct skcipher_request *req) struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm); - if (req->cryptlen <= CHACHA_BLOCK_SIZE || !crypto_simd_usable()) - return crypto_chacha_crypt(req); - return chacha_neon_stream_xor(req, ctx, req->iv); } @@ -105,14 +143,8 @@ static int xchacha_neon(struct skcipher_request *req) u32 state[16]; u8 real_iv[16]; - if (req->cryptlen <= CHACHA_BLOCK_SIZE || !crypto_simd_usable()) - return crypto_xchacha_crypt(req); - - crypto_chacha_init(state, ctx, req->iv); - - kernel_neon_begin(); - hchacha_block_neon(state, subctx.key, ctx->nrounds); - kernel_neon_end(); + chacha_init_generic(state, ctx->key, req->iv); + hchacha_block_arch(state, subctx.key, ctx->nrounds); subctx.nrounds = ctx->nrounds; memcpy(&real_iv[0], req->iv + 24, 8); @@ -134,7 +166,7 @@ static struct skcipher_alg algs[] = { .ivsize = CHACHA_IV_SIZE, .chunksize = CHACHA_BLOCK_SIZE, .walksize = 5 * CHACHA_BLOCK_SIZE, - .setkey = crypto_chacha20_setkey, + .setkey = chacha20_setkey, .encrypt = chacha_neon, .decrypt = chacha_neon, }, { @@ -150,7 +182,7 @@ static struct skcipher_alg algs[] = { .ivsize = XCHACHA_IV_SIZE, .chunksize = CHACHA_BLOCK_SIZE, .walksize = 5 * CHACHA_BLOCK_SIZE, - .setkey = crypto_chacha20_setkey, + .setkey = chacha20_setkey, .encrypt = xchacha_neon, .decrypt = xchacha_neon, }, { @@ -166,7 +198,7 @@ static struct skcipher_alg algs[] = { .ivsize = XCHACHA_IV_SIZE, .chunksize = CHACHA_BLOCK_SIZE, .walksize = 5 * CHACHA_BLOCK_SIZE, - .setkey = crypto_chacha12_setkey, + .setkey = chacha12_setkey, .encrypt = xchacha_neon, .decrypt = xchacha_neon, } @@ -175,14 +207,18 @@ static struct skcipher_alg algs[] = { static int __init chacha_simd_mod_init(void) { if (!cpu_have_named_feature(ASIMD)) - return -ENODEV; + return 0; + + static_branch_enable(&have_neon); - return crypto_register_skciphers(algs, ARRAY_SIZE(algs)); + return IS_REACHABLE(CONFIG_CRYPTO_SKCIPHER) ? + crypto_register_skciphers(algs, ARRAY_SIZE(algs)) : 0; } static void __exit chacha_simd_mod_fini(void) { - crypto_unregister_skciphers(algs, ARRAY_SIZE(algs)); + if (IS_REACHABLE(CONFIG_CRYPTO_SKCIPHER) && cpu_have_named_feature(ASIMD)) + crypto_unregister_skciphers(algs, ARRAY_SIZE(algs)); } module_init(chacha_simd_mod_init); diff --git a/arch/arm64/crypto/ghash-ce-core.S b/arch/arm64/crypto/ghash-ce-core.S index 410e8afcf5a7..a791c4adf8e6 100644 --- a/arch/arm64/crypto/ghash-ce-core.S +++ b/arch/arm64/crypto/ghash-ce-core.S @@ -13,8 +13,8 @@ T1 .req v2 T2 .req v3 MASK .req v4 - XL .req v5 - XM .req v6 + XM .req v5 + XL .req v6 XH .req v7 IN1 .req v7 @@ -358,20 +358,37 @@ ENTRY(pmull_ghash_update_p8) __pmull_ghash p8 ENDPROC(pmull_ghash_update_p8) - KS0 .req v12 - KS1 .req v13 - INP0 .req v14 - INP1 .req v15 - - .macro load_round_keys, rounds, rk - cmp \rounds, #12 - blo 2222f /* 128 bits */ - beq 1111f /* 192 bits */ - ld1 {v17.4s-v18.4s}, [\rk], #32 -1111: ld1 {v19.4s-v20.4s}, [\rk], #32 -2222: ld1 {v21.4s-v24.4s}, [\rk], #64 - ld1 {v25.4s-v28.4s}, [\rk], #64 - ld1 {v29.4s-v31.4s}, [\rk] + KS0 .req v8 + KS1 .req v9 + KS2 .req v10 + KS3 .req v11 + + INP0 .req v21 + INP1 .req v22 + INP2 .req v23 + INP3 .req v24 + + K0 .req v25 + K1 .req v26 + K2 .req v27 + K3 .req v28 + K4 .req v12 + K5 .req v13 + K6 .req v4 + K7 .req v5 + K8 .req v14 + K9 .req v15 + KK .req v29 + KL .req v30 + KM .req v31 + + .macro load_round_keys, rounds, rk, tmp + add \tmp, \rk, #64 + ld1 {K0.4s-K3.4s}, [\rk] + ld1 {K4.4s-K5.4s}, [\tmp] + add \tmp, \rk, \rounds, lsl #4 + sub \tmp, \tmp, #32 + ld1 {KK.4s-KM.4s}, [\tmp] .endm .macro enc_round, state, key @@ -379,197 +396,367 @@ ENDPROC(pmull_ghash_update_p8) aesmc \state\().16b, \state\().16b .endm - .macro enc_block, state, rounds - cmp \rounds, #12 - b.lo 2222f /* 128 bits */ - b.eq 1111f /* 192 bits */ - enc_round \state, v17 - enc_round \state, v18 -1111: enc_round \state, v19 - enc_round \state, v20 -2222: .irp key, v21, v22, v23, v24, v25, v26, v27, v28, v29 + .macro enc_qround, s0, s1, s2, s3, key + enc_round \s0, \key + enc_round \s1, \key + enc_round \s2, \key + enc_round \s3, \key + .endm + + .macro enc_block, state, rounds, rk, tmp + add \tmp, \rk, #96 + ld1 {K6.4s-K7.4s}, [\tmp], #32 + .irp key, K0, K1, K2, K3, K4 K5 enc_round \state, \key .endr - aese \state\().16b, v30.16b - eor \state\().16b, \state\().16b, v31.16b + + tbnz \rounds, #2, .Lnot128_\@ +.Lout256_\@: + enc_round \state, K6 + enc_round \state, K7 + +.Lout192_\@: + enc_round \state, KK + aese \state\().16b, KL.16b + eor \state\().16b, \state\().16b, KM.16b + + .subsection 1 +.Lnot128_\@: + ld1 {K8.4s-K9.4s}, [\tmp], #32 + enc_round \state, K6 + enc_round \state, K7 + ld1 {K6.4s-K7.4s}, [\tmp] + enc_round \state, K8 + enc_round \state, K9 + tbz \rounds, #1, .Lout192_\@ + b .Lout256_\@ + .previous .endm + .align 6 .macro pmull_gcm_do_crypt, enc - ld1 {SHASH.2d}, [x4], #16 - ld1 {HH.2d}, [x4] - ld1 {XL.2d}, [x1] - ldr x8, [x5, #8] // load lower counter + stp x29, x30, [sp, #-32]! + mov x29, sp + str x19, [sp, #24] + + load_round_keys x7, x6, x8 + + ld1 {SHASH.2d}, [x3], #16 + ld1 {HH.2d-HH4.2d}, [x3] - movi MASK.16b, #0xe1 trn1 SHASH2.2d, SHASH.2d, HH.2d trn2 T1.2d, SHASH.2d, HH.2d -CPU_LE( rev x8, x8 ) - shl MASK.2d, MASK.2d, #57 eor SHASH2.16b, SHASH2.16b, T1.16b - .if \enc == 1 - ldr x10, [sp] - ld1 {KS0.16b-KS1.16b}, [x10] - .endif + trn1 HH34.2d, HH3.2d, HH4.2d + trn2 T1.2d, HH3.2d, HH4.2d + eor HH34.16b, HH34.16b, T1.16b - cbnz x6, 4f + ld1 {XL.2d}, [x4] -0: ld1 {INP0.16b-INP1.16b}, [x3], #32 + cbz x0, 3f // tag only? - rev x9, x8 - add x11, x8, #1 - add x8, x8, #2 + ldr w8, [x5, #12] // load lower counter +CPU_LE( rev w8, w8 ) - .if \enc == 1 - eor INP0.16b, INP0.16b, KS0.16b // encrypt input - eor INP1.16b, INP1.16b, KS1.16b +0: mov w9, #4 // max blocks per round + add x10, x0, #0xf + lsr x10, x10, #4 // remaining blocks + + subs x0, x0, #64 + csel w9, w10, w9, mi + add w8, w8, w9 + + bmi 1f + ld1 {INP0.16b-INP3.16b}, [x2], #64 + .subsection 1 + /* + * Populate the four input registers right to left with up to 63 bytes + * of data, using overlapping loads to avoid branches. + * + * INP0 INP1 INP2 INP3 + * 1 byte | | | |x | + * 16 bytes | | | |xxxxxxxx| + * 17 bytes | | |xxxxxxxx|x | + * 47 bytes | |xxxxxxxx|xxxxxxxx|xxxxxxx | + * etc etc + * + * Note that this code may read up to 15 bytes before the start of + * the input. It is up to the calling code to ensure this is safe if + * this happens in the first iteration of the loop (i.e., when the + * input size is < 16 bytes) + */ +1: mov x15, #16 + ands x19, x0, #0xf + csel x19, x19, x15, ne + adr_l x17, .Lpermute_table + 16 + + sub x11, x15, x19 + add x12, x17, x11 + sub x17, x17, x11 + ld1 {T1.16b}, [x12] + sub x10, x1, x11 + sub x11, x2, x11 + + cmp x0, #-16 + csel x14, x15, xzr, gt + cmp x0, #-32 + csel x15, x15, xzr, gt + cmp x0, #-48 + csel x16, x19, xzr, gt + csel x1, x1, x10, gt + csel x2, x2, x11, gt + + ld1 {INP0.16b}, [x2], x14 + ld1 {INP1.16b}, [x2], x15 + ld1 {INP2.16b}, [x2], x16 + ld1 {INP3.16b}, [x2] + tbl INP3.16b, {INP3.16b}, T1.16b + b 2f + .previous + +2: .if \enc == 0 + bl pmull_gcm_ghash_4x .endif - ld1 {KS0.8b}, [x5] // load upper counter - rev x11, x11 - sub w0, w0, #2 - mov KS1.8b, KS0.8b - ins KS0.d[1], x9 // set lower counter - ins KS1.d[1], x11 + bl pmull_gcm_enc_4x - rev64 T1.16b, INP1.16b + tbnz x0, #63, 6f + st1 {INP0.16b-INP3.16b}, [x1], #64 + .if \enc == 1 + bl pmull_gcm_ghash_4x + .endif + bne 0b - cmp w7, #12 - b.ge 2f // AES-192/256? +3: ldp x19, x10, [sp, #24] + cbz x10, 5f // output tag? -1: enc_round KS0, v21 - ext IN1.16b, T1.16b, T1.16b, #8 + ld1 {INP3.16b}, [x10] // load lengths[] + mov w9, #1 + bl pmull_gcm_ghash_4x - enc_round KS1, v21 - pmull2 XH2.1q, SHASH.2d, IN1.2d // a1 * b1 + mov w11, #(0x1 << 24) // BE '1U' + ld1 {KS0.16b}, [x5] + mov KS0.s[3], w11 - enc_round KS0, v22 - eor T1.16b, T1.16b, IN1.16b + enc_block KS0, x7, x6, x12 - enc_round KS1, v22 - pmull XL2.1q, SHASH.1d, IN1.1d // a0 * b0 + ext XL.16b, XL.16b, XL.16b, #8 + rev64 XL.16b, XL.16b + eor XL.16b, XL.16b, KS0.16b + st1 {XL.16b}, [x10] // store tag - enc_round KS0, v23 - pmull XM2.1q, SHASH2.1d, T1.1d // (a1 + a0)(b1 + b0) +4: ldp x29, x30, [sp], #32 + ret - enc_round KS1, v23 - rev64 T1.16b, INP0.16b - ext T2.16b, XL.16b, XL.16b, #8 +5: +CPU_LE( rev w8, w8 ) + str w8, [x5, #12] // store lower counter + st1 {XL.2d}, [x4] + b 4b + +6: ld1 {T1.16b-T2.16b}, [x17], #32 // permute vectors + sub x17, x17, x19, lsl #1 + + cmp w9, #1 + beq 7f + .subsection 1 +7: ld1 {INP2.16b}, [x1] + tbx INP2.16b, {INP3.16b}, T1.16b + mov INP3.16b, INP2.16b + b 8f + .previous + + st1 {INP0.16b}, [x1], x14 + st1 {INP1.16b}, [x1], x15 + st1 {INP2.16b}, [x1], x16 + tbl INP3.16b, {INP3.16b}, T1.16b + tbx INP3.16b, {INP2.16b}, T2.16b +8: st1 {INP3.16b}, [x1] - enc_round KS0, v24 - ext IN1.16b, T1.16b, T1.16b, #8 - eor T1.16b, T1.16b, T2.16b + .if \enc == 1 + ld1 {T1.16b}, [x17] + tbl INP3.16b, {INP3.16b}, T1.16b // clear non-data bits + bl pmull_gcm_ghash_4x + .endif + b 3b + .endm - enc_round KS1, v24 - eor XL.16b, XL.16b, IN1.16b + /* + * void pmull_gcm_encrypt(int blocks, u8 dst[], const u8 src[], + * struct ghash_key const *k, u64 dg[], u8 ctr[], + * int rounds, u8 tag) + */ +ENTRY(pmull_gcm_encrypt) + pmull_gcm_do_crypt 1 +ENDPROC(pmull_gcm_encrypt) - enc_round KS0, v25 - eor T1.16b, T1.16b, XL.16b + /* + * void pmull_gcm_decrypt(int blocks, u8 dst[], const u8 src[], + * struct ghash_key const *k, u64 dg[], u8 ctr[], + * int rounds, u8 tag) + */ +ENTRY(pmull_gcm_decrypt) + pmull_gcm_do_crypt 0 +ENDPROC(pmull_gcm_decrypt) - enc_round KS1, v25 - pmull2 XH.1q, HH.2d, XL.2d // a1 * b1 +pmull_gcm_ghash_4x: + movi MASK.16b, #0xe1 + shl MASK.2d, MASK.2d, #57 - enc_round KS0, v26 - pmull XL.1q, HH.1d, XL.1d // a0 * b0 + rev64 T1.16b, INP0.16b + rev64 T2.16b, INP1.16b + rev64 TT3.16b, INP2.16b + rev64 TT4.16b, INP3.16b - enc_round KS1, v26 - pmull2 XM.1q, SHASH2.2d, T1.2d // (a1 + a0)(b1 + b0) + ext XL.16b, XL.16b, XL.16b, #8 - enc_round KS0, v27 - eor XL.16b, XL.16b, XL2.16b - eor XH.16b, XH.16b, XH2.16b + tbz w9, #2, 0f // <4 blocks? + .subsection 1 +0: movi XH2.16b, #0 + movi XM2.16b, #0 + movi XL2.16b, #0 - enc_round KS1, v27 - eor XM.16b, XM.16b, XM2.16b - ext T1.16b, XL.16b, XH.16b, #8 + tbz w9, #0, 1f // 2 blocks? + tbz w9, #1, 2f // 1 block? - enc_round KS0, v28 - eor T2.16b, XL.16b, XH.16b - eor XM.16b, XM.16b, T1.16b + eor T2.16b, T2.16b, XL.16b + ext T1.16b, T2.16b, T2.16b, #8 + b .Lgh3 - enc_round KS1, v28 - eor XM.16b, XM.16b, T2.16b +1: eor TT3.16b, TT3.16b, XL.16b + ext T2.16b, TT3.16b, TT3.16b, #8 + b .Lgh2 - enc_round KS0, v29 - pmull T2.1q, XL.1d, MASK.1d +2: eor TT4.16b, TT4.16b, XL.16b + ext IN1.16b, TT4.16b, TT4.16b, #8 + b .Lgh1 + .previous - enc_round KS1, v29 - mov XH.d[0], XM.d[1] - mov XM.d[1], XL.d[0] + eor T1.16b, T1.16b, XL.16b + ext IN1.16b, T1.16b, T1.16b, #8 - aese KS0.16b, v30.16b - eor XL.16b, XM.16b, T2.16b + pmull2 XH2.1q, HH4.2d, IN1.2d // a1 * b1 + eor T1.16b, T1.16b, IN1.16b + pmull XL2.1q, HH4.1d, IN1.1d // a0 * b0 + pmull2 XM2.1q, HH34.2d, T1.2d // (a1 + a0)(b1 + b0) - aese KS1.16b, v30.16b - ext T2.16b, XL.16b, XL.16b, #8 + ext T1.16b, T2.16b, T2.16b, #8 +.Lgh3: eor T2.16b, T2.16b, T1.16b + pmull2 XH.1q, HH3.2d, T1.2d // a1 * b1 + pmull XL.1q, HH3.1d, T1.1d // a0 * b0 + pmull XM.1q, HH34.1d, T2.1d // (a1 + a0)(b1 + b0) - eor KS0.16b, KS0.16b, v31.16b - pmull XL.1q, XL.1d, MASK.1d - eor T2.16b, T2.16b, XH.16b + eor XH2.16b, XH2.16b, XH.16b + eor XL2.16b, XL2.16b, XL.16b + eor XM2.16b, XM2.16b, XM.16b - eor KS1.16b, KS1.16b, v31.16b - eor XL.16b, XL.16b, T2.16b + ext T2.16b, TT3.16b, TT3.16b, #8 +.Lgh2: eor TT3.16b, TT3.16b, T2.16b + pmull2 XH.1q, HH.2d, T2.2d // a1 * b1 + pmull XL.1q, HH.1d, T2.1d // a0 * b0 + pmull2 XM.1q, SHASH2.2d, TT3.2d // (a1 + a0)(b1 + b0) - .if \enc == 0 - eor INP0.16b, INP0.16b, KS0.16b - eor INP1.16b, INP1.16b, KS1.16b - .endif + eor XH2.16b, XH2.16b, XH.16b + eor XL2.16b, XL2.16b, XL.16b + eor XM2.16b, XM2.16b, XM.16b - st1 {INP0.16b-INP1.16b}, [x2], #32 + ext IN1.16b, TT4.16b, TT4.16b, #8 +.Lgh1: eor TT4.16b, TT4.16b, IN1.16b + pmull XL.1q, SHASH.1d, IN1.1d // a0 * b0 + pmull2 XH.1q, SHASH.2d, IN1.2d // a1 * b1 + pmull XM.1q, SHASH2.1d, TT4.1d // (a1 + a0)(b1 + b0) - cbnz w0, 0b + eor XH.16b, XH.16b, XH2.16b + eor XL.16b, XL.16b, XL2.16b + eor XM.16b, XM.16b, XM2.16b -CPU_LE( rev x8, x8 ) - st1 {XL.2d}, [x1] - str x8, [x5, #8] // store lower counter + eor T2.16b, XL.16b, XH.16b + ext T1.16b, XL.16b, XH.16b, #8 + eor XM.16b, XM.16b, T2.16b - .if \enc == 1 - st1 {KS0.16b-KS1.16b}, [x10] - .endif + __pmull_reduce_p64 + + eor T2.16b, T2.16b, XH.16b + eor XL.16b, XL.16b, T2.16b ret +ENDPROC(pmull_gcm_ghash_4x) + +pmull_gcm_enc_4x: + ld1 {KS0.16b}, [x5] // load upper counter + sub w10, w8, #4 + sub w11, w8, #3 + sub w12, w8, #2 + sub w13, w8, #1 + rev w10, w10 + rev w11, w11 + rev w12, w12 + rev w13, w13 + mov KS1.16b, KS0.16b + mov KS2.16b, KS0.16b + mov KS3.16b, KS0.16b + ins KS0.s[3], w10 // set lower counter + ins KS1.s[3], w11 + ins KS2.s[3], w12 + ins KS3.s[3], w13 + + add x10, x6, #96 // round key pointer + ld1 {K6.4s-K7.4s}, [x10], #32 + .irp key, K0, K1, K2, K3, K4, K5 + enc_qround KS0, KS1, KS2, KS3, \key + .endr -2: b.eq 3f // AES-192? - enc_round KS0, v17 - enc_round KS1, v17 - enc_round KS0, v18 - enc_round KS1, v18 -3: enc_round KS0, v19 - enc_round KS1, v19 - enc_round KS0, v20 - enc_round KS1, v20 - b 1b + tbnz x7, #2, .Lnot128 + .subsection 1 +.Lnot128: + ld1 {K8.4s-K9.4s}, [x10], #32 + .irp key, K6, K7 + enc_qround KS0, KS1, KS2, KS3, \key + .endr + ld1 {K6.4s-K7.4s}, [x10] + .irp key, K8, K9 + enc_qround KS0, KS1, KS2, KS3, \key + .endr + tbz x7, #1, .Lout192 + b .Lout256 + .previous -4: load_round_keys w7, x6 - b 0b - .endm +.Lout256: + .irp key, K6, K7 + enc_qround KS0, KS1, KS2, KS3, \key + .endr - /* - * void pmull_gcm_encrypt(int blocks, u64 dg[], u8 dst[], const u8 src[], - * struct ghash_key const *k, u8 ctr[], - * int rounds, u8 ks[]) - */ -ENTRY(pmull_gcm_encrypt) - pmull_gcm_do_crypt 1 -ENDPROC(pmull_gcm_encrypt) +.Lout192: + enc_qround KS0, KS1, KS2, KS3, KK - /* - * void pmull_gcm_decrypt(int blocks, u64 dg[], u8 dst[], const u8 src[], - * struct ghash_key const *k, u8 ctr[], - * int rounds) - */ -ENTRY(pmull_gcm_decrypt) - pmull_gcm_do_crypt 0 -ENDPROC(pmull_gcm_decrypt) + aese KS0.16b, KL.16b + aese KS1.16b, KL.16b + aese KS2.16b, KL.16b + aese KS3.16b, KL.16b + + eor KS0.16b, KS0.16b, KM.16b + eor KS1.16b, KS1.16b, KM.16b + eor KS2.16b, KS2.16b, KM.16b + eor KS3.16b, KS3.16b, KM.16b + + eor INP0.16b, INP0.16b, KS0.16b + eor INP1.16b, INP1.16b, KS1.16b + eor INP2.16b, INP2.16b, KS2.16b + eor INP3.16b, INP3.16b, KS3.16b - /* - * void pmull_gcm_encrypt_block(u8 dst[], u8 src[], u8 rk[], int rounds) - */ -ENTRY(pmull_gcm_encrypt_block) - cbz x2, 0f - load_round_keys w3, x2 -0: ld1 {v0.16b}, [x1] - enc_block v0, w3 - st1 {v0.16b}, [x0] ret -ENDPROC(pmull_gcm_encrypt_block) +ENDPROC(pmull_gcm_enc_4x) + + .section ".rodata", "a" + .align 6 +.Lpermute_table: + .byte 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff + .byte 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff + .byte 0x0, 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7 + .byte 0x8, 0x9, 0xa, 0xb, 0xc, 0xd, 0xe, 0xf + .byte 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff + .byte 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff + .byte 0x0, 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7 + .byte 0x8, 0x9, 0xa, 0xb, 0xc, 0xd, 0xe, 0xf + .previous diff --git a/arch/arm64/crypto/ghash-ce-glue.c b/arch/arm64/crypto/ghash-ce-glue.c index 70b1469783f9..522cf004ce65 100644 --- a/arch/arm64/crypto/ghash-ce-glue.c +++ b/arch/arm64/crypto/ghash-ce-glue.c @@ -58,17 +58,15 @@ asmlinkage void pmull_ghash_update_p8(int blocks, u64 dg[], const char *src, struct ghash_key const *k, const char *head); -asmlinkage void pmull_gcm_encrypt(int blocks, u64 dg[], u8 dst[], - const u8 src[], struct ghash_key const *k, +asmlinkage void pmull_gcm_encrypt(int bytes, u8 dst[], const u8 src[], + struct ghash_key const *k, u64 dg[], u8 ctr[], u32 const rk[], int rounds, - u8 ks[]); + u8 tag[]); -asmlinkage void pmull_gcm_decrypt(int blocks, u64 dg[], u8 dst[], - const u8 src[], struct ghash_key const *k, - u8 ctr[], u32 const rk[], int rounds); - -asmlinkage void pmull_gcm_encrypt_block(u8 dst[], u8 const src[], - u32 const rk[], int rounds); +asmlinkage void pmull_gcm_decrypt(int bytes, u8 dst[], const u8 src[], + struct ghash_key const *k, u64 dg[], + u8 ctr[], u32 const rk[], int rounds, + u8 tag[]); static int ghash_init(struct shash_desc *desc) { @@ -85,7 +83,7 @@ static void ghash_do_update(int blocks, u64 dg[], const char *src, struct ghash_key const *k, const char *head)) { - if (likely(crypto_simd_usable())) { + if (likely(crypto_simd_usable() && simd_update)) { kernel_neon_begin(); simd_update(blocks, dg, src, key, head); kernel_neon_end(); @@ -398,136 +396,112 @@ static void gcm_calculate_auth_mac(struct aead_request *req, u64 dg[]) } } -static void gcm_final(struct aead_request *req, struct gcm_aes_ctx *ctx, - u64 dg[], u8 tag[], int cryptlen) -{ - u8 mac[AES_BLOCK_SIZE]; - u128 lengths; - - lengths.a = cpu_to_be64(req->assoclen * 8); - lengths.b = cpu_to_be64(cryptlen * 8); - - ghash_do_update(1, dg, (void *)&lengths, &ctx->ghash_key, NULL, - pmull_ghash_update_p64); - - put_unaligned_be64(dg[1], mac); - put_unaligned_be64(dg[0], mac + 8); - - crypto_xor(tag, mac, AES_BLOCK_SIZE); -} - static int gcm_encrypt(struct aead_request *req) { struct crypto_aead *aead = crypto_aead_reqtfm(req); struct gcm_aes_ctx *ctx = crypto_aead_ctx(aead); + int nrounds = num_rounds(&ctx->aes_key); struct skcipher_walk walk; + u8 buf[AES_BLOCK_SIZE]; u8 iv[AES_BLOCK_SIZE]; - u8 ks[2 * AES_BLOCK_SIZE]; - u8 tag[AES_BLOCK_SIZE]; u64 dg[2] = {}; - int nrounds = num_rounds(&ctx->aes_key); + u128 lengths; + u8 *tag; int err; + lengths.a = cpu_to_be64(req->assoclen * 8); + lengths.b = cpu_to_be64(req->cryptlen * 8); + if (req->assoclen) gcm_calculate_auth_mac(req, dg); memcpy(iv, req->iv, GCM_IV_SIZE); - put_unaligned_be32(1, iv + GCM_IV_SIZE); + put_unaligned_be32(2, iv + GCM_IV_SIZE); err = skcipher_walk_aead_encrypt(&walk, req, false); - if (likely(crypto_simd_usable() && walk.total >= 2 * AES_BLOCK_SIZE)) { - u32 const *rk = NULL; - - kernel_neon_begin(); - pmull_gcm_encrypt_block(tag, iv, ctx->aes_key.key_enc, nrounds); - put_unaligned_be32(2, iv + GCM_IV_SIZE); - pmull_gcm_encrypt_block(ks, iv, NULL, nrounds); - put_unaligned_be32(3, iv + GCM_IV_SIZE); - pmull_gcm_encrypt_block(ks + AES_BLOCK_SIZE, iv, NULL, nrounds); - put_unaligned_be32(4, iv + GCM_IV_SIZE); - + if (likely(crypto_simd_usable())) { do { - int blocks = walk.nbytes / (2 * AES_BLOCK_SIZE) * 2; + const u8 *src = walk.src.virt.addr; + u8 *dst = walk.dst.virt.addr; + int nbytes = walk.nbytes; + + tag = (u8 *)&lengths; - if (rk) - kernel_neon_begin(); + if (unlikely(nbytes > 0 && nbytes < AES_BLOCK_SIZE)) { + src = dst = memcpy(buf + sizeof(buf) - nbytes, + src, nbytes); + } else if (nbytes < walk.total) { + nbytes &= ~(AES_BLOCK_SIZE - 1); + tag = NULL; + } - pmull_gcm_encrypt(blocks, dg, walk.dst.virt.addr, - walk.src.virt.addr, &ctx->ghash_key, - iv, rk, nrounds, ks); + kernel_neon_begin(); + pmull_gcm_encrypt(nbytes, dst, src, &ctx->ghash_key, dg, + iv, ctx->aes_key.key_enc, nrounds, + tag); kernel_neon_end(); - err = skcipher_walk_done(&walk, - walk.nbytes % (2 * AES_BLOCK_SIZE)); + if (unlikely(!nbytes)) + break; - rk = ctx->aes_key.key_enc; - } while (walk.nbytes >= 2 * AES_BLOCK_SIZE); - } else { - aes_encrypt(&ctx->aes_key, tag, iv); - put_unaligned_be32(2, iv + GCM_IV_SIZE); + if (unlikely(nbytes > 0 && nbytes < AES_BLOCK_SIZE)) + memcpy(walk.dst.virt.addr, + buf + sizeof(buf) - nbytes, nbytes); - while (walk.nbytes >= (2 * AES_BLOCK_SIZE)) { - const int blocks = - walk.nbytes / (2 * AES_BLOCK_SIZE) * 2; + err = skcipher_walk_done(&walk, walk.nbytes - nbytes); + } while (walk.nbytes); + } else { + while (walk.nbytes >= AES_BLOCK_SIZE) { + int blocks = walk.nbytes / AES_BLOCK_SIZE; + const u8 *src = walk.src.virt.addr; u8 *dst = walk.dst.virt.addr; - u8 *src = walk.src.virt.addr; int remaining = blocks; do { - aes_encrypt(&ctx->aes_key, ks, iv); - crypto_xor_cpy(dst, src, ks, AES_BLOCK_SIZE); + aes_encrypt(&ctx->aes_key, buf, iv); + crypto_xor_cpy(dst, src, buf, AES_BLOCK_SIZE); crypto_inc(iv, AES_BLOCK_SIZE); dst += AES_BLOCK_SIZE; src += AES_BLOCK_SIZE; } while (--remaining > 0); - ghash_do_update(blocks, dg, - walk.dst.virt.addr, &ctx->ghash_key, - NULL, pmull_ghash_update_p64); + ghash_do_update(blocks, dg, walk.dst.virt.addr, + &ctx->ghash_key, NULL, NULL); err = skcipher_walk_done(&walk, - walk.nbytes % (2 * AES_BLOCK_SIZE)); - } - if (walk.nbytes) { - aes_encrypt(&ctx->aes_key, ks, iv); - if (walk.nbytes > AES_BLOCK_SIZE) { - crypto_inc(iv, AES_BLOCK_SIZE); - aes_encrypt(&ctx->aes_key, ks + AES_BLOCK_SIZE, iv); - } + walk.nbytes % AES_BLOCK_SIZE); } - } - /* handle the tail */ - if (walk.nbytes) { - u8 buf[GHASH_BLOCK_SIZE]; - unsigned int nbytes = walk.nbytes; - u8 *dst = walk.dst.virt.addr; - u8 *head = NULL; + /* handle the tail */ + if (walk.nbytes) { + aes_encrypt(&ctx->aes_key, buf, iv); - crypto_xor_cpy(walk.dst.virt.addr, walk.src.virt.addr, ks, - walk.nbytes); + crypto_xor_cpy(walk.dst.virt.addr, walk.src.virt.addr, + buf, walk.nbytes); - if (walk.nbytes > GHASH_BLOCK_SIZE) { - head = dst; - dst += GHASH_BLOCK_SIZE; - nbytes %= GHASH_BLOCK_SIZE; + memcpy(buf, walk.dst.virt.addr, walk.nbytes); + memset(buf + walk.nbytes, 0, sizeof(buf) - walk.nbytes); } - memcpy(buf, dst, nbytes); - memset(buf + nbytes, 0, GHASH_BLOCK_SIZE - nbytes); - ghash_do_update(!!nbytes, dg, buf, &ctx->ghash_key, head, - pmull_ghash_update_p64); + tag = (u8 *)&lengths; + ghash_do_update(1, dg, tag, &ctx->ghash_key, + walk.nbytes ? buf : NULL, NULL); - err = skcipher_walk_done(&walk, 0); + if (walk.nbytes) + err = skcipher_walk_done(&walk, 0); + + put_unaligned_be64(dg[1], tag); + put_unaligned_be64(dg[0], tag + 8); + put_unaligned_be32(1, iv + GCM_IV_SIZE); + aes_encrypt(&ctx->aes_key, iv, iv); + crypto_xor(tag, iv, AES_BLOCK_SIZE); } if (err) return err; - gcm_final(req, ctx, dg, tag, req->cryptlen); - /* copy authtag to end of dst */ scatterwalk_map_and_copy(tag, req->dst, req->assoclen + req->cryptlen, crypto_aead_authsize(aead), 1); @@ -540,75 +514,65 @@ static int gcm_decrypt(struct aead_request *req) struct crypto_aead *aead = crypto_aead_reqtfm(req); struct gcm_aes_ctx *ctx = crypto_aead_ctx(aead); unsigned int authsize = crypto_aead_authsize(aead); + int nrounds = num_rounds(&ctx->aes_key); struct skcipher_walk walk; - u8 iv[2 * AES_BLOCK_SIZE]; - u8 tag[AES_BLOCK_SIZE]; - u8 buf[2 * GHASH_BLOCK_SIZE]; + u8 buf[AES_BLOCK_SIZE]; + u8 iv[AES_BLOCK_SIZE]; u64 dg[2] = {}; - int nrounds = num_rounds(&ctx->aes_key); + u128 lengths; + u8 *tag; int err; + lengths.a = cpu_to_be64(req->assoclen * 8); + lengths.b = cpu_to_be64((req->cryptlen - authsize) * 8); + if (req->assoclen) gcm_calculate_auth_mac(req, dg); memcpy(iv, req->iv, GCM_IV_SIZE); - put_unaligned_be32(1, iv + GCM_IV_SIZE); + put_unaligned_be32(2, iv + GCM_IV_SIZE); err = skcipher_walk_aead_decrypt(&walk, req, false); - if (likely(crypto_simd_usable() && walk.total >= 2 * AES_BLOCK_SIZE)) { - u32 const *rk = NULL; - - kernel_neon_begin(); - pmull_gcm_encrypt_block(tag, iv, ctx->aes_key.key_enc, nrounds); - put_unaligned_be32(2, iv + GCM_IV_SIZE); - + if (likely(crypto_simd_usable())) { do { - int blocks = walk.nbytes / (2 * AES_BLOCK_SIZE) * 2; - int rem = walk.total - blocks * AES_BLOCK_SIZE; - - if (rk) - kernel_neon_begin(); - - pmull_gcm_decrypt(blocks, dg, walk.dst.virt.addr, - walk.src.virt.addr, &ctx->ghash_key, - iv, rk, nrounds); - - /* check if this is the final iteration of the loop */ - if (rem < (2 * AES_BLOCK_SIZE)) { - u8 *iv2 = iv + AES_BLOCK_SIZE; - - if (rem > AES_BLOCK_SIZE) { - memcpy(iv2, iv, AES_BLOCK_SIZE); - crypto_inc(iv2, AES_BLOCK_SIZE); - } + const u8 *src = walk.src.virt.addr; + u8 *dst = walk.dst.virt.addr; + int nbytes = walk.nbytes; - pmull_gcm_encrypt_block(iv, iv, NULL, nrounds); + tag = (u8 *)&lengths; - if (rem > AES_BLOCK_SIZE) - pmull_gcm_encrypt_block(iv2, iv2, NULL, - nrounds); + if (unlikely(nbytes > 0 && nbytes < AES_BLOCK_SIZE)) { + src = dst = memcpy(buf + sizeof(buf) - nbytes, + src, nbytes); + } else if (nbytes < walk.total) { + nbytes &= ~(AES_BLOCK_SIZE - 1); + tag = NULL; } + kernel_neon_begin(); + pmull_gcm_decrypt(nbytes, dst, src, &ctx->ghash_key, dg, + iv, ctx->aes_key.key_enc, nrounds, + tag); kernel_neon_end(); - err = skcipher_walk_done(&walk, - walk.nbytes % (2 * AES_BLOCK_SIZE)); + if (unlikely(!nbytes)) + break; - rk = ctx->aes_key.key_enc; - } while (walk.nbytes >= 2 * AES_BLOCK_SIZE); - } else { - aes_encrypt(&ctx->aes_key, tag, iv); - put_unaligned_be32(2, iv + GCM_IV_SIZE); + if (unlikely(nbytes > 0 && nbytes < AES_BLOCK_SIZE)) + memcpy(walk.dst.virt.addr, + buf + sizeof(buf) - nbytes, nbytes); - while (walk.nbytes >= (2 * AES_BLOCK_SIZE)) { - int blocks = walk.nbytes / (2 * AES_BLOCK_SIZE) * 2; + err = skcipher_walk_done(&walk, walk.nbytes - nbytes); + } while (walk.nbytes); + } else { + while (walk.nbytes >= AES_BLOCK_SIZE) { + int blocks = walk.nbytes / AES_BLOCK_SIZE; + const u8 *src = walk.src.virt.addr; u8 *dst = walk.dst.virt.addr; - u8 *src = walk.src.virt.addr; ghash_do_update(blocks, dg, walk.src.virt.addr, - &ctx->ghash_key, NULL, - pmull_ghash_update_p64); + &ctx->ghash_key, NULL, NULL); do { aes_encrypt(&ctx->aes_key, buf, iv); @@ -620,49 +584,38 @@ static int gcm_decrypt(struct aead_request *req) } while (--blocks > 0); err = skcipher_walk_done(&walk, - walk.nbytes % (2 * AES_BLOCK_SIZE)); + walk.nbytes % AES_BLOCK_SIZE); } - if (walk.nbytes) { - if (walk.nbytes > AES_BLOCK_SIZE) { - u8 *iv2 = iv + AES_BLOCK_SIZE; - - memcpy(iv2, iv, AES_BLOCK_SIZE); - crypto_inc(iv2, AES_BLOCK_SIZE); - aes_encrypt(&ctx->aes_key, iv2, iv2); - } - aes_encrypt(&ctx->aes_key, iv, iv); + /* handle the tail */ + if (walk.nbytes) { + memcpy(buf, walk.src.virt.addr, walk.nbytes); + memset(buf + walk.nbytes, 0, sizeof(buf) - walk.nbytes); } - } - /* handle the tail */ - if (walk.nbytes) { - const u8 *src = walk.src.virt.addr; - const u8 *head = NULL; - unsigned int nbytes = walk.nbytes; + tag = (u8 *)&lengths; + ghash_do_update(1, dg, tag, &ctx->ghash_key, + walk.nbytes ? buf : NULL, NULL); - if (walk.nbytes > GHASH_BLOCK_SIZE) { - head = src; - src += GHASH_BLOCK_SIZE; - nbytes %= GHASH_BLOCK_SIZE; - } + if (walk.nbytes) { + aes_encrypt(&ctx->aes_key, buf, iv); - memcpy(buf, src, nbytes); - memset(buf + nbytes, 0, GHASH_BLOCK_SIZE - nbytes); - ghash_do_update(!!nbytes, dg, buf, &ctx->ghash_key, head, - pmull_ghash_update_p64); + crypto_xor_cpy(walk.dst.virt.addr, walk.src.virt.addr, + buf, walk.nbytes); - crypto_xor_cpy(walk.dst.virt.addr, walk.src.virt.addr, iv, - walk.nbytes); + err = skcipher_walk_done(&walk, 0); + } - err = skcipher_walk_done(&walk, 0); + put_unaligned_be64(dg[1], tag); + put_unaligned_be64(dg[0], tag + 8); + put_unaligned_be32(1, iv + GCM_IV_SIZE); + aes_encrypt(&ctx->aes_key, iv, iv); + crypto_xor(tag, iv, AES_BLOCK_SIZE); } if (err) return err; - gcm_final(req, ctx, dg, tag, req->cryptlen - authsize); - /* compare calculated auth tag with the stored one */ scatterwalk_map_and_copy(buf, req->src, req->assoclen + req->cryptlen - authsize, @@ -675,7 +628,7 @@ static int gcm_decrypt(struct aead_request *req) static struct aead_alg gcm_aes_alg = { .ivsize = GCM_IV_SIZE, - .chunksize = 2 * AES_BLOCK_SIZE, + .chunksize = AES_BLOCK_SIZE, .maxauthsize = AES_BLOCK_SIZE, .setkey = gcm_setkey, .setauthsize = gcm_setauthsize, diff --git a/arch/arm64/crypto/poly1305-armv8.pl b/arch/arm64/crypto/poly1305-armv8.pl new file mode 100644 index 000000000000..6e5576d19af8 --- /dev/null +++ b/arch/arm64/crypto/poly1305-armv8.pl @@ -0,0 +1,913 @@ +#!/usr/bin/env perl +# SPDX-License-Identifier: GPL-1.0+ OR BSD-3-Clause +# +# ==================================================================== +# Written by Andy Polyakov, @dot-asm, initially for the OpenSSL +# project. +# ==================================================================== +# +# This module implements Poly1305 hash for ARMv8. +# +# June 2015 +# +# Numbers are cycles per processed byte with poly1305_blocks alone. +# +# IALU/gcc-4.9 NEON +# +# Apple A7 1.86/+5% 0.72 +# Cortex-A53 2.69/+58% 1.47 +# Cortex-A57 2.70/+7% 1.14 +# Denver 1.64/+50% 1.18(*) +# X-Gene 2.13/+68% 2.27 +# Mongoose 1.77/+75% 1.12 +# Kryo 2.70/+55% 1.13 +# ThunderX2 1.17/+95% 1.36 +# +# (*) estimate based on resources availability is less than 1.0, +# i.e. measured result is worse than expected, presumably binary +# translator is not almighty; + +$flavour=shift; +$output=shift; + +if ($flavour && $flavour ne "void") { + $0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; + ( $xlate="${dir}arm-xlate.pl" and -f $xlate ) or + ( $xlate="${dir}../../perlasm/arm-xlate.pl" and -f $xlate) or + die "can't locate arm-xlate.pl"; + + open STDOUT,"| \"$^X\" $xlate $flavour $output"; +} else { + open STDOUT,">$output"; +} + +my ($ctx,$inp,$len,$padbit) = map("x$_",(0..3)); +my ($mac,$nonce)=($inp,$len); + +my ($h0,$h1,$h2,$r0,$r1,$s1,$t0,$t1,$d0,$d1,$d2) = map("x$_",(4..14)); + +$code.=<<___; +#ifndef __KERNEL__ +# include "arm_arch.h" +.extern OPENSSL_armcap_P +#endif + +.text + +// forward "declarations" are required for Apple +.globl poly1305_blocks +.globl poly1305_emit + +.globl poly1305_init +.type poly1305_init,%function +.align 5 +poly1305_init: + cmp $inp,xzr + stp xzr,xzr,[$ctx] // zero hash value + stp xzr,xzr,[$ctx,#16] // [along with is_base2_26] + + csel x0,xzr,x0,eq + b.eq .Lno_key + +#ifndef __KERNEL__ + adrp x17,OPENSSL_armcap_P + ldr w17,[x17,#:lo12:OPENSSL_armcap_P] +#endif + + ldp $r0,$r1,[$inp] // load key + mov $s1,#0xfffffffc0fffffff + movk $s1,#0x0fff,lsl#48 +#ifdef __AARCH64EB__ + rev $r0,$r0 // flip bytes + rev $r1,$r1 +#endif + and $r0,$r0,$s1 // &=0ffffffc0fffffff + and $s1,$s1,#-4 + and $r1,$r1,$s1 // &=0ffffffc0ffffffc + mov w#$s1,#-1 + stp $r0,$r1,[$ctx,#32] // save key value + str w#$s1,[$ctx,#48] // impossible key power value + +#ifndef __KERNEL__ + tst w17,#ARMV7_NEON + + adr $d0,.Lpoly1305_blocks + adr $r0,.Lpoly1305_blocks_neon + adr $d1,.Lpoly1305_emit + + csel $d0,$d0,$r0,eq + +# ifdef __ILP32__ + stp w#$d0,w#$d1,[$len] +# else + stp $d0,$d1,[$len] +# endif +#endif + mov x0,#1 +.Lno_key: + ret +.size poly1305_init,.-poly1305_init + +.type poly1305_blocks,%function +.align 5 +poly1305_blocks: +.Lpoly1305_blocks: + ands $len,$len,#-16 + b.eq .Lno_data + + ldp $h0,$h1,[$ctx] // load hash value + ldp $h2,x17,[$ctx,#16] // [along with is_base2_26] + ldp $r0,$r1,[$ctx,#32] // load key value + +#ifdef __AARCH64EB__ + lsr $d0,$h0,#32 + mov w#$d1,w#$h0 + lsr $d2,$h1,#32 + mov w15,w#$h1 + lsr x16,$h2,#32 +#else + mov w#$d0,w#$h0 + lsr $d1,$h0,#32 + mov w#$d2,w#$h1 + lsr x15,$h1,#32 + mov w16,w#$h2 +#endif + + add $d0,$d0,$d1,lsl#26 // base 2^26 -> base 2^64 + lsr $d1,$d2,#12 + adds $d0,$d0,$d2,lsl#52 + add $d1,$d1,x15,lsl#14 + adc $d1,$d1,xzr + lsr $d2,x16,#24 + adds $d1,$d1,x16,lsl#40 + adc $d2,$d2,xzr + + cmp x17,#0 // is_base2_26? + add $s1,$r1,$r1,lsr#2 // s1 = r1 + (r1 >> 2) + csel $h0,$h0,$d0,eq // choose between radixes + csel $h1,$h1,$d1,eq + csel $h2,$h2,$d2,eq + +.Loop: + ldp $t0,$t1,[$inp],#16 // load input + sub $len,$len,#16 +#ifdef __AARCH64EB__ + rev $t0,$t0 + rev $t1,$t1 +#endif + adds $h0,$h0,$t0 // accumulate input + adcs $h1,$h1,$t1 + + mul $d0,$h0,$r0 // h0*r0 + adc $h2,$h2,$padbit + umulh $d1,$h0,$r0 + + mul $t0,$h1,$s1 // h1*5*r1 + umulh $t1,$h1,$s1 + + adds $d0,$d0,$t0 + mul $t0,$h0,$r1 // h0*r1 + adc $d1,$d1,$t1 + umulh $d2,$h0,$r1 + + adds $d1,$d1,$t0 + mul $t0,$h1,$r0 // h1*r0 + adc $d2,$d2,xzr + umulh $t1,$h1,$r0 + + adds $d1,$d1,$t0 + mul $t0,$h2,$s1 // h2*5*r1 + adc $d2,$d2,$t1 + mul $t1,$h2,$r0 // h2*r0 + + adds $d1,$d1,$t0 + adc $d2,$d2,$t1 + + and $t0,$d2,#-4 // final reduction + and $h2,$d2,#3 + add $t0,$t0,$d2,lsr#2 + adds $h0,$d0,$t0 + adcs $h1,$d1,xzr + adc $h2,$h2,xzr + + cbnz $len,.Loop + + stp $h0,$h1,[$ctx] // store hash value + stp $h2,xzr,[$ctx,#16] // [and clear is_base2_26] + +.Lno_data: + ret +.size poly1305_blocks,.-poly1305_blocks + +.type poly1305_emit,%function +.align 5 +poly1305_emit: +.Lpoly1305_emit: + ldp $h0,$h1,[$ctx] // load hash base 2^64 + ldp $h2,$r0,[$ctx,#16] // [along with is_base2_26] + ldp $t0,$t1,[$nonce] // load nonce + +#ifdef __AARCH64EB__ + lsr $d0,$h0,#32 + mov w#$d1,w#$h0 + lsr $d2,$h1,#32 + mov w15,w#$h1 + lsr x16,$h2,#32 +#else + mov w#$d0,w#$h0 + lsr $d1,$h0,#32 + mov w#$d2,w#$h1 + lsr x15,$h1,#32 + mov w16,w#$h2 +#endif + + add $d0,$d0,$d1,lsl#26 // base 2^26 -> base 2^64 + lsr $d1,$d2,#12 + adds $d0,$d0,$d2,lsl#52 + add $d1,$d1,x15,lsl#14 + adc $d1,$d1,xzr + lsr $d2,x16,#24 + adds $d1,$d1,x16,lsl#40 + adc $d2,$d2,xzr + + cmp $r0,#0 // is_base2_26? + csel $h0,$h0,$d0,eq // choose between radixes + csel $h1,$h1,$d1,eq + csel $h2,$h2,$d2,eq + + adds $d0,$h0,#5 // compare to modulus + adcs $d1,$h1,xzr + adc $d2,$h2,xzr + + tst $d2,#-4 // see if it's carried/borrowed + + csel $h0,$h0,$d0,eq + csel $h1,$h1,$d1,eq + +#ifdef __AARCH64EB__ + ror $t0,$t0,#32 // flip nonce words + ror $t1,$t1,#32 +#endif + adds $h0,$h0,$t0 // accumulate nonce + adc $h1,$h1,$t1 +#ifdef __AARCH64EB__ + rev $h0,$h0 // flip output bytes + rev $h1,$h1 +#endif + stp $h0,$h1,[$mac] // write result + + ret +.size poly1305_emit,.-poly1305_emit +___ +my ($R0,$R1,$S1,$R2,$S2,$R3,$S3,$R4,$S4) = map("v$_.4s",(0..8)); +my ($IN01_0,$IN01_1,$IN01_2,$IN01_3,$IN01_4) = map("v$_.2s",(9..13)); +my ($IN23_0,$IN23_1,$IN23_2,$IN23_3,$IN23_4) = map("v$_.2s",(14..18)); +my ($ACC0,$ACC1,$ACC2,$ACC3,$ACC4) = map("v$_.2d",(19..23)); +my ($H0,$H1,$H2,$H3,$H4) = map("v$_.2s",(24..28)); +my ($T0,$T1,$MASK) = map("v$_",(29..31)); + +my ($in2,$zeros)=("x16","x17"); +my $is_base2_26 = $zeros; # borrow + +$code.=<<___; +.type poly1305_mult,%function +.align 5 +poly1305_mult: + mul $d0,$h0,$r0 // h0*r0 + umulh $d1,$h0,$r0 + + mul $t0,$h1,$s1 // h1*5*r1 + umulh $t1,$h1,$s1 + + adds $d0,$d0,$t0 + mul $t0,$h0,$r1 // h0*r1 + adc $d1,$d1,$t1 + umulh $d2,$h0,$r1 + + adds $d1,$d1,$t0 + mul $t0,$h1,$r0 // h1*r0 + adc $d2,$d2,xzr + umulh $t1,$h1,$r0 + + adds $d1,$d1,$t0 + mul $t0,$h2,$s1 // h2*5*r1 + adc $d2,$d2,$t1 + mul $t1,$h2,$r0 // h2*r0 + + adds $d1,$d1,$t0 + adc $d2,$d2,$t1 + + and $t0,$d2,#-4 // final reduction + and $h2,$d2,#3 + add $t0,$t0,$d2,lsr#2 + adds $h0,$d0,$t0 + adcs $h1,$d1,xzr + adc $h2,$h2,xzr + + ret +.size poly1305_mult,.-poly1305_mult + +.type poly1305_splat,%function +.align 4 +poly1305_splat: + and x12,$h0,#0x03ffffff // base 2^64 -> base 2^26 + ubfx x13,$h0,#26,#26 + extr x14,$h1,$h0,#52 + and x14,x14,#0x03ffffff + ubfx x15,$h1,#14,#26 + extr x16,$h2,$h1,#40 + + str w12,[$ctx,#16*0] // r0 + add w12,w13,w13,lsl#2 // r1*5 + str w13,[$ctx,#16*1] // r1 + add w13,w14,w14,lsl#2 // r2*5 + str w12,[$ctx,#16*2] // s1 + str w14,[$ctx,#16*3] // r2 + add w14,w15,w15,lsl#2 // r3*5 + str w13,[$ctx,#16*4] // s2 + str w15,[$ctx,#16*5] // r3 + add w15,w16,w16,lsl#2 // r4*5 + str w14,[$ctx,#16*6] // s3 + str w16,[$ctx,#16*7] // r4 + str w15,[$ctx,#16*8] // s4 + + ret +.size poly1305_splat,.-poly1305_splat + +#ifdef __KERNEL__ +.globl poly1305_blocks_neon +#endif +.type poly1305_blocks_neon,%function +.align 5 +poly1305_blocks_neon: +.Lpoly1305_blocks_neon: + ldr $is_base2_26,[$ctx,#24] + cmp $len,#128 + b.lo .Lpoly1305_blocks + + .inst 0xd503233f // paciasp + stp x29,x30,[sp,#-80]! + add x29,sp,#0 + + stp d8,d9,[sp,#16] // meet ABI requirements + stp d10,d11,[sp,#32] + stp d12,d13,[sp,#48] + stp d14,d15,[sp,#64] + + cbz $is_base2_26,.Lbase2_64_neon + + ldp w10,w11,[$ctx] // load hash value base 2^26 + ldp w12,w13,[$ctx,#8] + ldr w14,[$ctx,#16] + + tst $len,#31 + b.eq .Leven_neon + + ldp $r0,$r1,[$ctx,#32] // load key value + + add $h0,x10,x11,lsl#26 // base 2^26 -> base 2^64 + lsr $h1,x12,#12 + adds $h0,$h0,x12,lsl#52 + add $h1,$h1,x13,lsl#14 + adc $h1,$h1,xzr + lsr $h2,x14,#24 + adds $h1,$h1,x14,lsl#40 + adc $d2,$h2,xzr // can be partially reduced... + + ldp $d0,$d1,[$inp],#16 // load input + sub $len,$len,#16 + add $s1,$r1,$r1,lsr#2 // s1 = r1 + (r1 >> 2) + +#ifdef __AARCH64EB__ + rev $d0,$d0 + rev $d1,$d1 +#endif + adds $h0,$h0,$d0 // accumulate input + adcs $h1,$h1,$d1 + adc $h2,$h2,$padbit + + bl poly1305_mult + + and x10,$h0,#0x03ffffff // base 2^64 -> base 2^26 + ubfx x11,$h0,#26,#26 + extr x12,$h1,$h0,#52 + and x12,x12,#0x03ffffff + ubfx x13,$h1,#14,#26 + extr x14,$h2,$h1,#40 + + b .Leven_neon + +.align 4 +.Lbase2_64_neon: + ldp $r0,$r1,[$ctx,#32] // load key value + + ldp $h0,$h1,[$ctx] // load hash value base 2^64 + ldr $h2,[$ctx,#16] + + tst $len,#31 + b.eq .Linit_neon + + ldp $d0,$d1,[$inp],#16 // load input + sub $len,$len,#16 + add $s1,$r1,$r1,lsr#2 // s1 = r1 + (r1 >> 2) +#ifdef __AARCH64EB__ + rev $d0,$d0 + rev $d1,$d1 +#endif + adds $h0,$h0,$d0 // accumulate input + adcs $h1,$h1,$d1 + adc $h2,$h2,$padbit + + bl poly1305_mult + +.Linit_neon: + ldr w17,[$ctx,#48] // first table element + and x10,$h0,#0x03ffffff // base 2^64 -> base 2^26 + ubfx x11,$h0,#26,#26 + extr x12,$h1,$h0,#52 + and x12,x12,#0x03ffffff + ubfx x13,$h1,#14,#26 + extr x14,$h2,$h1,#40 + + cmp w17,#-1 // is value impossible? + b.ne .Leven_neon + + fmov ${H0},x10 + fmov ${H1},x11 + fmov ${H2},x12 + fmov ${H3},x13 + fmov ${H4},x14 + + ////////////////////////////////// initialize r^n table + mov $h0,$r0 // r^1 + add $s1,$r1,$r1,lsr#2 // s1 = r1 + (r1 >> 2) + mov $h1,$r1 + mov $h2,xzr + add $ctx,$ctx,#48+12 + bl poly1305_splat + + bl poly1305_mult // r^2 + sub $ctx,$ctx,#4 + bl poly1305_splat + + bl poly1305_mult // r^3 + sub $ctx,$ctx,#4 + bl poly1305_splat + + bl poly1305_mult // r^4 + sub $ctx,$ctx,#4 + bl poly1305_splat + sub $ctx,$ctx,#48 // restore original $ctx + b .Ldo_neon + +.align 4 +.Leven_neon: + fmov ${H0},x10 + fmov ${H1},x11 + fmov ${H2},x12 + fmov ${H3},x13 + fmov ${H4},x14 + +.Ldo_neon: + ldp x8,x12,[$inp,#32] // inp[2:3] + subs $len,$len,#64 + ldp x9,x13,[$inp,#48] + add $in2,$inp,#96 + adr $zeros,.Lzeros + + lsl $padbit,$padbit,#24 + add x15,$ctx,#48 + +#ifdef __AARCH64EB__ + rev x8,x8 + rev x12,x12 + rev x9,x9 + rev x13,x13 +#endif + and x4,x8,#0x03ffffff // base 2^64 -> base 2^26 + and x5,x9,#0x03ffffff + ubfx x6,x8,#26,#26 + ubfx x7,x9,#26,#26 + add x4,x4,x5,lsl#32 // bfi x4,x5,#32,#32 + extr x8,x12,x8,#52 + extr x9,x13,x9,#52 + add x6,x6,x7,lsl#32 // bfi x6,x7,#32,#32 + fmov $IN23_0,x4 + and x8,x8,#0x03ffffff + and x9,x9,#0x03ffffff + ubfx x10,x12,#14,#26 + ubfx x11,x13,#14,#26 + add x12,$padbit,x12,lsr#40 + add x13,$padbit,x13,lsr#40 + add x8,x8,x9,lsl#32 // bfi x8,x9,#32,#32 + fmov $IN23_1,x6 + add x10,x10,x11,lsl#32 // bfi x10,x11,#32,#32 + add x12,x12,x13,lsl#32 // bfi x12,x13,#32,#32 + fmov $IN23_2,x8 + fmov $IN23_3,x10 + fmov $IN23_4,x12 + + ldp x8,x12,[$inp],#16 // inp[0:1] + ldp x9,x13,[$inp],#48 + + ld1 {$R0,$R1,$S1,$R2},[x15],#64 + ld1 {$S2,$R3,$S3,$R4},[x15],#64 + ld1 {$S4},[x15] + +#ifdef __AARCH64EB__ + rev x8,x8 + rev x12,x12 + rev x9,x9 + rev x13,x13 +#endif + and x4,x8,#0x03ffffff // base 2^64 -> base 2^26 + and x5,x9,#0x03ffffff + ubfx x6,x8,#26,#26 + ubfx x7,x9,#26,#26 + add x4,x4,x5,lsl#32 // bfi x4,x5,#32,#32 + extr x8,x12,x8,#52 + extr x9,x13,x9,#52 + add x6,x6,x7,lsl#32 // bfi x6,x7,#32,#32 + fmov $IN01_0,x4 + and x8,x8,#0x03ffffff + and x9,x9,#0x03ffffff + ubfx x10,x12,#14,#26 + ubfx x11,x13,#14,#26 + add x12,$padbit,x12,lsr#40 + add x13,$padbit,x13,lsr#40 + add x8,x8,x9,lsl#32 // bfi x8,x9,#32,#32 + fmov $IN01_1,x6 + add x10,x10,x11,lsl#32 // bfi x10,x11,#32,#32 + add x12,x12,x13,lsl#32 // bfi x12,x13,#32,#32 + movi $MASK.2d,#-1 + fmov $IN01_2,x8 + fmov $IN01_3,x10 + fmov $IN01_4,x12 + ushr $MASK.2d,$MASK.2d,#38 + + b.ls .Lskip_loop + +.align 4 +.Loop_neon: + //////////////////////////////////////////////////////////////// + // ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2 + // ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^3+inp[7]*r + // \___________________/ + // ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2+inp[8])*r^2 + // ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^4+inp[7]*r^2+inp[9])*r + // \___________________/ \____________________/ + // + // Note that we start with inp[2:3]*r^2. This is because it + // doesn't depend on reduction in previous iteration. + //////////////////////////////////////////////////////////////// + // d4 = h0*r4 + h1*r3 + h2*r2 + h3*r1 + h4*r0 + // d3 = h0*r3 + h1*r2 + h2*r1 + h3*r0 + h4*5*r4 + // d2 = h0*r2 + h1*r1 + h2*r0 + h3*5*r4 + h4*5*r3 + // d1 = h0*r1 + h1*r0 + h2*5*r4 + h3*5*r3 + h4*5*r2 + // d0 = h0*r0 + h1*5*r4 + h2*5*r3 + h3*5*r2 + h4*5*r1 + + subs $len,$len,#64 + umull $ACC4,$IN23_0,${R4}[2] + csel $in2,$zeros,$in2,lo + umull $ACC3,$IN23_0,${R3}[2] + umull $ACC2,$IN23_0,${R2}[2] + ldp x8,x12,[$in2],#16 // inp[2:3] (or zero) + umull $ACC1,$IN23_0,${R1}[2] + ldp x9,x13,[$in2],#48 + umull $ACC0,$IN23_0,${R0}[2] +#ifdef __AARCH64EB__ + rev x8,x8 + rev x12,x12 + rev x9,x9 + rev x13,x13 +#endif + + umlal $ACC4,$IN23_1,${R3}[2] + and x4,x8,#0x03ffffff // base 2^64 -> base 2^26 + umlal $ACC3,$IN23_1,${R2}[2] + and x5,x9,#0x03ffffff + umlal $ACC2,$IN23_1,${R1}[2] + ubfx x6,x8,#26,#26 + umlal $ACC1,$IN23_1,${R0}[2] + ubfx x7,x9,#26,#26 + umlal $ACC0,$IN23_1,${S4}[2] + add x4,x4,x5,lsl#32 // bfi x4,x5,#32,#32 + + umlal $ACC4,$IN23_2,${R2}[2] + extr x8,x12,x8,#52 + umlal $ACC3,$IN23_2,${R1}[2] + extr x9,x13,x9,#52 + umlal $ACC2,$IN23_2,${R0}[2] + add x6,x6,x7,lsl#32 // bfi x6,x7,#32,#32 + umlal $ACC1,$IN23_2,${S4}[2] + fmov $IN23_0,x4 + umlal $ACC0,$IN23_2,${S3}[2] + and x8,x8,#0x03ffffff + + umlal $ACC4,$IN23_3,${R1}[2] + and x9,x9,#0x03ffffff + umlal $ACC3,$IN23_3,${R0}[2] + ubfx x10,x12,#14,#26 + umlal $ACC2,$IN23_3,${S4}[2] + ubfx x11,x13,#14,#26 + umlal $ACC1,$IN23_3,${S3}[2] + add x8,x8,x9,lsl#32 // bfi x8,x9,#32,#32 + umlal $ACC0,$IN23_3,${S2}[2] + fmov $IN23_1,x6 + + add $IN01_2,$IN01_2,$H2 + add x12,$padbit,x12,lsr#40 + umlal $ACC4,$IN23_4,${R0}[2] + add x13,$padbit,x13,lsr#40 + umlal $ACC3,$IN23_4,${S4}[2] + add x10,x10,x11,lsl#32 // bfi x10,x11,#32,#32 + umlal $ACC2,$IN23_4,${S3}[2] + add x12,x12,x13,lsl#32 // bfi x12,x13,#32,#32 + umlal $ACC1,$IN23_4,${S2}[2] + fmov $IN23_2,x8 + umlal $ACC0,$IN23_4,${S1}[2] + fmov $IN23_3,x10 + + //////////////////////////////////////////////////////////////// + // (hash+inp[0:1])*r^4 and accumulate + + add $IN01_0,$IN01_0,$H0 + fmov $IN23_4,x12 + umlal $ACC3,$IN01_2,${R1}[0] + ldp x8,x12,[$inp],#16 // inp[0:1] + umlal $ACC0,$IN01_2,${S3}[0] + ldp x9,x13,[$inp],#48 + umlal $ACC4,$IN01_2,${R2}[0] + umlal $ACC1,$IN01_2,${S4}[0] + umlal $ACC2,$IN01_2,${R0}[0] +#ifdef __AARCH64EB__ + rev x8,x8 + rev x12,x12 + rev x9,x9 + rev x13,x13 +#endif + + add $IN01_1,$IN01_1,$H1 + umlal $ACC3,$IN01_0,${R3}[0] + umlal $ACC4,$IN01_0,${R4}[0] + and x4,x8,#0x03ffffff // base 2^64 -> base 2^26 + umlal $ACC2,$IN01_0,${R2}[0] + and x5,x9,#0x03ffffff + umlal $ACC0,$IN01_0,${R0}[0] + ubfx x6,x8,#26,#26 + umlal $ACC1,$IN01_0,${R1}[0] + ubfx x7,x9,#26,#26 + + add $IN01_3,$IN01_3,$H3 + add x4,x4,x5,lsl#32 // bfi x4,x5,#32,#32 + umlal $ACC3,$IN01_1,${R2}[0] + extr x8,x12,x8,#52 + umlal $ACC4,$IN01_1,${R3}[0] + extr x9,x13,x9,#52 + umlal $ACC0,$IN01_1,${S4}[0] + add x6,x6,x7,lsl#32 // bfi x6,x7,#32,#32 + umlal $ACC2,$IN01_1,${R1}[0] + fmov $IN01_0,x4 + umlal $ACC1,$IN01_1,${R0}[0] + and x8,x8,#0x03ffffff + + add $IN01_4,$IN01_4,$H4 + and x9,x9,#0x03ffffff + umlal $ACC3,$IN01_3,${R0}[0] + ubfx x10,x12,#14,#26 + umlal $ACC0,$IN01_3,${S2}[0] + ubfx x11,x13,#14,#26 + umlal $ACC4,$IN01_3,${R1}[0] + add x8,x8,x9,lsl#32 // bfi x8,x9,#32,#32 + umlal $ACC1,$IN01_3,${S3}[0] + fmov $IN01_1,x6 + umlal $ACC2,$IN01_3,${S4}[0] + add x12,$padbit,x12,lsr#40 + + umlal $ACC3,$IN01_4,${S4}[0] + add x13,$padbit,x13,lsr#40 + umlal $ACC0,$IN01_4,${S1}[0] + add x10,x10,x11,lsl#32 // bfi x10,x11,#32,#32 + umlal $ACC4,$IN01_4,${R0}[0] + add x12,x12,x13,lsl#32 // bfi x12,x13,#32,#32 + umlal $ACC1,$IN01_4,${S2}[0] + fmov $IN01_2,x8 + umlal $ACC2,$IN01_4,${S3}[0] + fmov $IN01_3,x10 + fmov $IN01_4,x12 + + ///////////////////////////////////////////////////////////////// + // lazy reduction as discussed in "NEON crypto" by D.J. Bernstein + // and P. Schwabe + // + // [see discussion in poly1305-armv4 module] + + ushr $T0.2d,$ACC3,#26 + xtn $H3,$ACC3 + ushr $T1.2d,$ACC0,#26 + and $ACC0,$ACC0,$MASK.2d + add $ACC4,$ACC4,$T0.2d // h3 -> h4 + bic $H3,#0xfc,lsl#24 // &=0x03ffffff + add $ACC1,$ACC1,$T1.2d // h0 -> h1 + + ushr $T0.2d,$ACC4,#26 + xtn $H4,$ACC4 + ushr $T1.2d,$ACC1,#26 + xtn $H1,$ACC1 + bic $H4,#0xfc,lsl#24 + add $ACC2,$ACC2,$T1.2d // h1 -> h2 + + add $ACC0,$ACC0,$T0.2d + shl $T0.2d,$T0.2d,#2 + shrn $T1.2s,$ACC2,#26 + xtn $H2,$ACC2 + add $ACC0,$ACC0,$T0.2d // h4 -> h0 + bic $H1,#0xfc,lsl#24 + add $H3,$H3,$T1.2s // h2 -> h3 + bic $H2,#0xfc,lsl#24 + + shrn $T0.2s,$ACC0,#26 + xtn $H0,$ACC0 + ushr $T1.2s,$H3,#26 + bic $H3,#0xfc,lsl#24 + bic $H0,#0xfc,lsl#24 + add $H1,$H1,$T0.2s // h0 -> h1 + add $H4,$H4,$T1.2s // h3 -> h4 + + b.hi .Loop_neon + +.Lskip_loop: + dup $IN23_2,${IN23_2}[0] + add $IN01_2,$IN01_2,$H2 + + //////////////////////////////////////////////////////////////// + // multiply (inp[0:1]+hash) or inp[2:3] by r^2:r^1 + + adds $len,$len,#32 + b.ne .Long_tail + + dup $IN23_2,${IN01_2}[0] + add $IN23_0,$IN01_0,$H0 + add $IN23_3,$IN01_3,$H3 + add $IN23_1,$IN01_1,$H1 + add $IN23_4,$IN01_4,$H4 + +.Long_tail: + dup $IN23_0,${IN23_0}[0] + umull2 $ACC0,$IN23_2,${S3} + umull2 $ACC3,$IN23_2,${R1} + umull2 $ACC4,$IN23_2,${R2} + umull2 $ACC2,$IN23_2,${R0} + umull2 $ACC1,$IN23_2,${S4} + + dup $IN23_1,${IN23_1}[0] + umlal2 $ACC0,$IN23_0,${R0} + umlal2 $ACC2,$IN23_0,${R2} + umlal2 $ACC3,$IN23_0,${R3} + umlal2 $ACC4,$IN23_0,${R4} + umlal2 $ACC1,$IN23_0,${R1} + + dup $IN23_3,${IN23_3}[0] + umlal2 $ACC0,$IN23_1,${S4} + umlal2 $ACC3,$IN23_1,${R2} + umlal2 $ACC2,$IN23_1,${R1} + umlal2 $ACC4,$IN23_1,${R3} + umlal2 $ACC1,$IN23_1,${R0} + + dup $IN23_4,${IN23_4}[0] + umlal2 $ACC3,$IN23_3,${R0} + umlal2 $ACC4,$IN23_3,${R1} + umlal2 $ACC0,$IN23_3,${S2} + umlal2 $ACC1,$IN23_3,${S3} + umlal2 $ACC2,$IN23_3,${S4} + + umlal2 $ACC3,$IN23_4,${S4} + umlal2 $ACC0,$IN23_4,${S1} + umlal2 $ACC4,$IN23_4,${R0} + umlal2 $ACC1,$IN23_4,${S2} + umlal2 $ACC2,$IN23_4,${S3} + + b.eq .Lshort_tail + + //////////////////////////////////////////////////////////////// + // (hash+inp[0:1])*r^4:r^3 and accumulate + + add $IN01_0,$IN01_0,$H0 + umlal $ACC3,$IN01_2,${R1} + umlal $ACC0,$IN01_2,${S3} + umlal $ACC4,$IN01_2,${R2} + umlal $ACC1,$IN01_2,${S4} + umlal $ACC2,$IN01_2,${R0} + + add $IN01_1,$IN01_1,$H1 + umlal $ACC3,$IN01_0,${R3} + umlal $ACC0,$IN01_0,${R0} + umlal $ACC4,$IN01_0,${R4} + umlal $ACC1,$IN01_0,${R1} + umlal $ACC2,$IN01_0,${R2} + + add $IN01_3,$IN01_3,$H3 + umlal $ACC3,$IN01_1,${R2} + umlal $ACC0,$IN01_1,${S4} + umlal $ACC4,$IN01_1,${R3} + umlal $ACC1,$IN01_1,${R0} + umlal $ACC2,$IN01_1,${R1} + + add $IN01_4,$IN01_4,$H4 + umlal $ACC3,$IN01_3,${R0} + umlal $ACC0,$IN01_3,${S2} + umlal $ACC4,$IN01_3,${R1} + umlal $ACC1,$IN01_3,${S3} + umlal $ACC2,$IN01_3,${S4} + + umlal $ACC3,$IN01_4,${S4} + umlal $ACC0,$IN01_4,${S1} + umlal $ACC4,$IN01_4,${R0} + umlal $ACC1,$IN01_4,${S2} + umlal $ACC2,$IN01_4,${S3} + +.Lshort_tail: + //////////////////////////////////////////////////////////////// + // horizontal add + + addp $ACC3,$ACC3,$ACC3 + ldp d8,d9,[sp,#16] // meet ABI requirements + addp $ACC0,$ACC0,$ACC0 + ldp d10,d11,[sp,#32] + addp $ACC4,$ACC4,$ACC4 + ldp d12,d13,[sp,#48] + addp $ACC1,$ACC1,$ACC1 + ldp d14,d15,[sp,#64] + addp $ACC2,$ACC2,$ACC2 + ldr x30,[sp,#8] + .inst 0xd50323bf // autiasp + + //////////////////////////////////////////////////////////////// + // lazy reduction, but without narrowing + + ushr $T0.2d,$ACC3,#26 + and $ACC3,$ACC3,$MASK.2d + ushr $T1.2d,$ACC0,#26 + and $ACC0,$ACC0,$MASK.2d + + add $ACC4,$ACC4,$T0.2d // h3 -> h4 + add $ACC1,$ACC1,$T1.2d // h0 -> h1 + + ushr $T0.2d,$ACC4,#26 + and $ACC4,$ACC4,$MASK.2d + ushr $T1.2d,$ACC1,#26 + and $ACC1,$ACC1,$MASK.2d + add $ACC2,$ACC2,$T1.2d // h1 -> h2 + + add $ACC0,$ACC0,$T0.2d + shl $T0.2d,$T0.2d,#2 + ushr $T1.2d,$ACC2,#26 + and $ACC2,$ACC2,$MASK.2d + add $ACC0,$ACC0,$T0.2d // h4 -> h0 + add $ACC3,$ACC3,$T1.2d // h2 -> h3 + + ushr $T0.2d,$ACC0,#26 + and $ACC0,$ACC0,$MASK.2d + ushr $T1.2d,$ACC3,#26 + and $ACC3,$ACC3,$MASK.2d + add $ACC1,$ACC1,$T0.2d // h0 -> h1 + add $ACC4,$ACC4,$T1.2d // h3 -> h4 + + //////////////////////////////////////////////////////////////// + // write the result, can be partially reduced + + st4 {$ACC0,$ACC1,$ACC2,$ACC3}[0],[$ctx],#16 + mov x4,#1 + st1 {$ACC4}[0],[$ctx] + str x4,[$ctx,#8] // set is_base2_26 + + ldr x29,[sp],#80 + ret +.size poly1305_blocks_neon,.-poly1305_blocks_neon + +.align 5 +.Lzeros: +.long 0,0,0,0,0,0,0,0 +.asciz "Poly1305 for ARMv8, CRYPTOGAMS by \@dot-asm" +.align 2 +#if !defined(__KERNEL__) && !defined(_WIN64) +.comm OPENSSL_armcap_P,4,4 +.hidden OPENSSL_armcap_P +#endif +___ + +foreach (split("\n",$code)) { + s/\b(shrn\s+v[0-9]+)\.[24]d/$1.2s/ or + s/\b(fmov\s+)v([0-9]+)[^,]*,\s*x([0-9]+)/$1d$2,x$3/ or + (m/\bdup\b/ and (s/\.[24]s/.2d/g or 1)) or + (m/\b(eor|and)/ and (s/\.[248][sdh]/.16b/g or 1)) or + (m/\bum(ul|la)l\b/ and (s/\.4s/.2s/g or 1)) or + (m/\bum(ul|la)l2\b/ and (s/\.2s/.4s/g or 1)) or + (m/\bst[1-4]\s+{[^}]+}\[/ and (s/\.[24]d/.s/g or 1)); + + s/\.[124]([sd])\[/.$1\[/; + s/w#x([0-9]+)/w$1/g; + + print $_,"\n"; +} +close STDOUT; diff --git a/arch/arm64/crypto/poly1305-core.S_shipped b/arch/arm64/crypto/poly1305-core.S_shipped new file mode 100644 index 000000000000..8d1c4e420ccd --- /dev/null +++ b/arch/arm64/crypto/poly1305-core.S_shipped @@ -0,0 +1,835 @@ +#ifndef __KERNEL__ +# include "arm_arch.h" +.extern OPENSSL_armcap_P +#endif + +.text + +// forward "declarations" are required for Apple +.globl poly1305_blocks +.globl poly1305_emit + +.globl poly1305_init +.type poly1305_init,%function +.align 5 +poly1305_init: + cmp x1,xzr + stp xzr,xzr,[x0] // zero hash value + stp xzr,xzr,[x0,#16] // [along with is_base2_26] + + csel x0,xzr,x0,eq + b.eq .Lno_key + +#ifndef __KERNEL__ + adrp x17,OPENSSL_armcap_P + ldr w17,[x17,#:lo12:OPENSSL_armcap_P] +#endif + + ldp x7,x8,[x1] // load key + mov x9,#0xfffffffc0fffffff + movk x9,#0x0fff,lsl#48 +#ifdef __AARCH64EB__ + rev x7,x7 // flip bytes + rev x8,x8 +#endif + and x7,x7,x9 // &=0ffffffc0fffffff + and x9,x9,#-4 + and x8,x8,x9 // &=0ffffffc0ffffffc + mov w9,#-1 + stp x7,x8,[x0,#32] // save key value + str w9,[x0,#48] // impossible key power value + +#ifndef __KERNEL__ + tst w17,#ARMV7_NEON + + adr x12,.Lpoly1305_blocks + adr x7,.Lpoly1305_blocks_neon + adr x13,.Lpoly1305_emit + + csel x12,x12,x7,eq + +# ifdef __ILP32__ + stp w12,w13,[x2] +# else + stp x12,x13,[x2] +# endif +#endif + mov x0,#1 +.Lno_key: + ret +.size poly1305_init,.-poly1305_init + +.type poly1305_blocks,%function +.align 5 +poly1305_blocks: +.Lpoly1305_blocks: + ands x2,x2,#-16 + b.eq .Lno_data + + ldp x4,x5,[x0] // load hash value + ldp x6,x17,[x0,#16] // [along with is_base2_26] + ldp x7,x8,[x0,#32] // load key value + +#ifdef __AARCH64EB__ + lsr x12,x4,#32 + mov w13,w4 + lsr x14,x5,#32 + mov w15,w5 + lsr x16,x6,#32 +#else + mov w12,w4 + lsr x13,x4,#32 + mov w14,w5 + lsr x15,x5,#32 + mov w16,w6 +#endif + + add x12,x12,x13,lsl#26 // base 2^26 -> base 2^64 + lsr x13,x14,#12 + adds x12,x12,x14,lsl#52 + add x13,x13,x15,lsl#14 + adc x13,x13,xzr + lsr x14,x16,#24 + adds x13,x13,x16,lsl#40 + adc x14,x14,xzr + + cmp x17,#0 // is_base2_26? + add x9,x8,x8,lsr#2 // s1 = r1 + (r1 >> 2) + csel x4,x4,x12,eq // choose between radixes + csel x5,x5,x13,eq + csel x6,x6,x14,eq + +.Loop: + ldp x10,x11,[x1],#16 // load input + sub x2,x2,#16 +#ifdef __AARCH64EB__ + rev x10,x10 + rev x11,x11 +#endif + adds x4,x4,x10 // accumulate input + adcs x5,x5,x11 + + mul x12,x4,x7 // h0*r0 + adc x6,x6,x3 + umulh x13,x4,x7 + + mul x10,x5,x9 // h1*5*r1 + umulh x11,x5,x9 + + adds x12,x12,x10 + mul x10,x4,x8 // h0*r1 + adc x13,x13,x11 + umulh x14,x4,x8 + + adds x13,x13,x10 + mul x10,x5,x7 // h1*r0 + adc x14,x14,xzr + umulh x11,x5,x7 + + adds x13,x13,x10 + mul x10,x6,x9 // h2*5*r1 + adc x14,x14,x11 + mul x11,x6,x7 // h2*r0 + + adds x13,x13,x10 + adc x14,x14,x11 + + and x10,x14,#-4 // final reduction + and x6,x14,#3 + add x10,x10,x14,lsr#2 + adds x4,x12,x10 + adcs x5,x13,xzr + adc x6,x6,xzr + + cbnz x2,.Loop + + stp x4,x5,[x0] // store hash value + stp x6,xzr,[x0,#16] // [and clear is_base2_26] + +.Lno_data: + ret +.size poly1305_blocks,.-poly1305_blocks + +.type poly1305_emit,%function +.align 5 +poly1305_emit: +.Lpoly1305_emit: + ldp x4,x5,[x0] // load hash base 2^64 + ldp x6,x7,[x0,#16] // [along with is_base2_26] + ldp x10,x11,[x2] // load nonce + +#ifdef __AARCH64EB__ + lsr x12,x4,#32 + mov w13,w4 + lsr x14,x5,#32 + mov w15,w5 + lsr x16,x6,#32 +#else + mov w12,w4 + lsr x13,x4,#32 + mov w14,w5 + lsr x15,x5,#32 + mov w16,w6 +#endif + + add x12,x12,x13,lsl#26 // base 2^26 -> base 2^64 + lsr x13,x14,#12 + adds x12,x12,x14,lsl#52 + add x13,x13,x15,lsl#14 + adc x13,x13,xzr + lsr x14,x16,#24 + adds x13,x13,x16,lsl#40 + adc x14,x14,xzr + + cmp x7,#0 // is_base2_26? + csel x4,x4,x12,eq // choose between radixes + csel x5,x5,x13,eq + csel x6,x6,x14,eq + + adds x12,x4,#5 // compare to modulus + adcs x13,x5,xzr + adc x14,x6,xzr + + tst x14,#-4 // see if it's carried/borrowed + + csel x4,x4,x12,eq + csel x5,x5,x13,eq + +#ifdef __AARCH64EB__ + ror x10,x10,#32 // flip nonce words + ror x11,x11,#32 +#endif + adds x4,x4,x10 // accumulate nonce + adc x5,x5,x11 +#ifdef __AARCH64EB__ + rev x4,x4 // flip output bytes + rev x5,x5 +#endif + stp x4,x5,[x1] // write result + + ret +.size poly1305_emit,.-poly1305_emit +.type poly1305_mult,%function +.align 5 +poly1305_mult: + mul x12,x4,x7 // h0*r0 + umulh x13,x4,x7 + + mul x10,x5,x9 // h1*5*r1 + umulh x11,x5,x9 + + adds x12,x12,x10 + mul x10,x4,x8 // h0*r1 + adc x13,x13,x11 + umulh x14,x4,x8 + + adds x13,x13,x10 + mul x10,x5,x7 // h1*r0 + adc x14,x14,xzr + umulh x11,x5,x7 + + adds x13,x13,x10 + mul x10,x6,x9 // h2*5*r1 + adc x14,x14,x11 + mul x11,x6,x7 // h2*r0 + + adds x13,x13,x10 + adc x14,x14,x11 + + and x10,x14,#-4 // final reduction + and x6,x14,#3 + add x10,x10,x14,lsr#2 + adds x4,x12,x10 + adcs x5,x13,xzr + adc x6,x6,xzr + + ret +.size poly1305_mult,.-poly1305_mult + +.type poly1305_splat,%function +.align 4 +poly1305_splat: + and x12,x4,#0x03ffffff // base 2^64 -> base 2^26 + ubfx x13,x4,#26,#26 + extr x14,x5,x4,#52 + and x14,x14,#0x03ffffff + ubfx x15,x5,#14,#26 + extr x16,x6,x5,#40 + + str w12,[x0,#16*0] // r0 + add w12,w13,w13,lsl#2 // r1*5 + str w13,[x0,#16*1] // r1 + add w13,w14,w14,lsl#2 // r2*5 + str w12,[x0,#16*2] // s1 + str w14,[x0,#16*3] // r2 + add w14,w15,w15,lsl#2 // r3*5 + str w13,[x0,#16*4] // s2 + str w15,[x0,#16*5] // r3 + add w15,w16,w16,lsl#2 // r4*5 + str w14,[x0,#16*6] // s3 + str w16,[x0,#16*7] // r4 + str w15,[x0,#16*8] // s4 + + ret +.size poly1305_splat,.-poly1305_splat + +#ifdef __KERNEL__ +.globl poly1305_blocks_neon +#endif +.type poly1305_blocks_neon,%function +.align 5 +poly1305_blocks_neon: +.Lpoly1305_blocks_neon: + ldr x17,[x0,#24] + cmp x2,#128 + b.lo .Lpoly1305_blocks + + .inst 0xd503233f // paciasp + stp x29,x30,[sp,#-80]! + add x29,sp,#0 + + stp d8,d9,[sp,#16] // meet ABI requirements + stp d10,d11,[sp,#32] + stp d12,d13,[sp,#48] + stp d14,d15,[sp,#64] + + cbz x17,.Lbase2_64_neon + + ldp w10,w11,[x0] // load hash value base 2^26 + ldp w12,w13,[x0,#8] + ldr w14,[x0,#16] + + tst x2,#31 + b.eq .Leven_neon + + ldp x7,x8,[x0,#32] // load key value + + add x4,x10,x11,lsl#26 // base 2^26 -> base 2^64 + lsr x5,x12,#12 + adds x4,x4,x12,lsl#52 + add x5,x5,x13,lsl#14 + adc x5,x5,xzr + lsr x6,x14,#24 + adds x5,x5,x14,lsl#40 + adc x14,x6,xzr // can be partially reduced... + + ldp x12,x13,[x1],#16 // load input + sub x2,x2,#16 + add x9,x8,x8,lsr#2 // s1 = r1 + (r1 >> 2) + +#ifdef __AARCH64EB__ + rev x12,x12 + rev x13,x13 +#endif + adds x4,x4,x12 // accumulate input + adcs x5,x5,x13 + adc x6,x6,x3 + + bl poly1305_mult + + and x10,x4,#0x03ffffff // base 2^64 -> base 2^26 + ubfx x11,x4,#26,#26 + extr x12,x5,x4,#52 + and x12,x12,#0x03ffffff + ubfx x13,x5,#14,#26 + extr x14,x6,x5,#40 + + b .Leven_neon + +.align 4 +.Lbase2_64_neon: + ldp x7,x8,[x0,#32] // load key value + + ldp x4,x5,[x0] // load hash value base 2^64 + ldr x6,[x0,#16] + + tst x2,#31 + b.eq .Linit_neon + + ldp x12,x13,[x1],#16 // load input + sub x2,x2,#16 + add x9,x8,x8,lsr#2 // s1 = r1 + (r1 >> 2) +#ifdef __AARCH64EB__ + rev x12,x12 + rev x13,x13 +#endif + adds x4,x4,x12 // accumulate input + adcs x5,x5,x13 + adc x6,x6,x3 + + bl poly1305_mult + +.Linit_neon: + ldr w17,[x0,#48] // first table element + and x10,x4,#0x03ffffff // base 2^64 -> base 2^26 + ubfx x11,x4,#26,#26 + extr x12,x5,x4,#52 + and x12,x12,#0x03ffffff + ubfx x13,x5,#14,#26 + extr x14,x6,x5,#40 + + cmp w17,#-1 // is value impossible? + b.ne .Leven_neon + + fmov d24,x10 + fmov d25,x11 + fmov d26,x12 + fmov d27,x13 + fmov d28,x14 + + ////////////////////////////////// initialize r^n table + mov x4,x7 // r^1 + add x9,x8,x8,lsr#2 // s1 = r1 + (r1 >> 2) + mov x5,x8 + mov x6,xzr + add x0,x0,#48+12 + bl poly1305_splat + + bl poly1305_mult // r^2 + sub x0,x0,#4 + bl poly1305_splat + + bl poly1305_mult // r^3 + sub x0,x0,#4 + bl poly1305_splat + + bl poly1305_mult // r^4 + sub x0,x0,#4 + bl poly1305_splat + sub x0,x0,#48 // restore original x0 + b .Ldo_neon + +.align 4 +.Leven_neon: + fmov d24,x10 + fmov d25,x11 + fmov d26,x12 + fmov d27,x13 + fmov d28,x14 + +.Ldo_neon: + ldp x8,x12,[x1,#32] // inp[2:3] + subs x2,x2,#64 + ldp x9,x13,[x1,#48] + add x16,x1,#96 + adr x17,.Lzeros + + lsl x3,x3,#24 + add x15,x0,#48 + +#ifdef __AARCH64EB__ + rev x8,x8 + rev x12,x12 + rev x9,x9 + rev x13,x13 +#endif + and x4,x8,#0x03ffffff // base 2^64 -> base 2^26 + and x5,x9,#0x03ffffff + ubfx x6,x8,#26,#26 + ubfx x7,x9,#26,#26 + add x4,x4,x5,lsl#32 // bfi x4,x5,#32,#32 + extr x8,x12,x8,#52 + extr x9,x13,x9,#52 + add x6,x6,x7,lsl#32 // bfi x6,x7,#32,#32 + fmov d14,x4 + and x8,x8,#0x03ffffff + and x9,x9,#0x03ffffff + ubfx x10,x12,#14,#26 + ubfx x11,x13,#14,#26 + add x12,x3,x12,lsr#40 + add x13,x3,x13,lsr#40 + add x8,x8,x9,lsl#32 // bfi x8,x9,#32,#32 + fmov d15,x6 + add x10,x10,x11,lsl#32 // bfi x10,x11,#32,#32 + add x12,x12,x13,lsl#32 // bfi x12,x13,#32,#32 + fmov d16,x8 + fmov d17,x10 + fmov d18,x12 + + ldp x8,x12,[x1],#16 // inp[0:1] + ldp x9,x13,[x1],#48 + + ld1 {v0.4s,v1.4s,v2.4s,v3.4s},[x15],#64 + ld1 {v4.4s,v5.4s,v6.4s,v7.4s},[x15],#64 + ld1 {v8.4s},[x15] + +#ifdef __AARCH64EB__ + rev x8,x8 + rev x12,x12 + rev x9,x9 + rev x13,x13 +#endif + and x4,x8,#0x03ffffff // base 2^64 -> base 2^26 + and x5,x9,#0x03ffffff + ubfx x6,x8,#26,#26 + ubfx x7,x9,#26,#26 + add x4,x4,x5,lsl#32 // bfi x4,x5,#32,#32 + extr x8,x12,x8,#52 + extr x9,x13,x9,#52 + add x6,x6,x7,lsl#32 // bfi x6,x7,#32,#32 + fmov d9,x4 + and x8,x8,#0x03ffffff + and x9,x9,#0x03ffffff + ubfx x10,x12,#14,#26 + ubfx x11,x13,#14,#26 + add x12,x3,x12,lsr#40 + add x13,x3,x13,lsr#40 + add x8,x8,x9,lsl#32 // bfi x8,x9,#32,#32 + fmov d10,x6 + add x10,x10,x11,lsl#32 // bfi x10,x11,#32,#32 + add x12,x12,x13,lsl#32 // bfi x12,x13,#32,#32 + movi v31.2d,#-1 + fmov d11,x8 + fmov d12,x10 + fmov d13,x12 + ushr v31.2d,v31.2d,#38 + + b.ls .Lskip_loop + +.align 4 +.Loop_neon: + //////////////////////////////////////////////////////////////// + // ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2 + // ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^3+inp[7]*r + // ___________________/ + // ((inp[0]*r^4+inp[2]*r^2+inp[4])*r^4+inp[6]*r^2+inp[8])*r^2 + // ((inp[1]*r^4+inp[3]*r^2+inp[5])*r^4+inp[7]*r^2+inp[9])*r + // ___________________/ ____________________/ + // + // Note that we start with inp[2:3]*r^2. This is because it + // doesn't depend on reduction in previous iteration. + //////////////////////////////////////////////////////////////// + // d4 = h0*r4 + h1*r3 + h2*r2 + h3*r1 + h4*r0 + // d3 = h0*r3 + h1*r2 + h2*r1 + h3*r0 + h4*5*r4 + // d2 = h0*r2 + h1*r1 + h2*r0 + h3*5*r4 + h4*5*r3 + // d1 = h0*r1 + h1*r0 + h2*5*r4 + h3*5*r3 + h4*5*r2 + // d0 = h0*r0 + h1*5*r4 + h2*5*r3 + h3*5*r2 + h4*5*r1 + + subs x2,x2,#64 + umull v23.2d,v14.2s,v7.s[2] + csel x16,x17,x16,lo + umull v22.2d,v14.2s,v5.s[2] + umull v21.2d,v14.2s,v3.s[2] + ldp x8,x12,[x16],#16 // inp[2:3] (or zero) + umull v20.2d,v14.2s,v1.s[2] + ldp x9,x13,[x16],#48 + umull v19.2d,v14.2s,v0.s[2] +#ifdef __AARCH64EB__ + rev x8,x8 + rev x12,x12 + rev x9,x9 + rev x13,x13 +#endif + + umlal v23.2d,v15.2s,v5.s[2] + and x4,x8,#0x03ffffff // base 2^64 -> base 2^26 + umlal v22.2d,v15.2s,v3.s[2] + and x5,x9,#0x03ffffff + umlal v21.2d,v15.2s,v1.s[2] + ubfx x6,x8,#26,#26 + umlal v20.2d,v15.2s,v0.s[2] + ubfx x7,x9,#26,#26 + umlal v19.2d,v15.2s,v8.s[2] + add x4,x4,x5,lsl#32 // bfi x4,x5,#32,#32 + + umlal v23.2d,v16.2s,v3.s[2] + extr x8,x12,x8,#52 + umlal v22.2d,v16.2s,v1.s[2] + extr x9,x13,x9,#52 + umlal v21.2d,v16.2s,v0.s[2] + add x6,x6,x7,lsl#32 // bfi x6,x7,#32,#32 + umlal v20.2d,v16.2s,v8.s[2] + fmov d14,x4 + umlal v19.2d,v16.2s,v6.s[2] + and x8,x8,#0x03ffffff + + umlal v23.2d,v17.2s,v1.s[2] + and x9,x9,#0x03ffffff + umlal v22.2d,v17.2s,v0.s[2] + ubfx x10,x12,#14,#26 + umlal v21.2d,v17.2s,v8.s[2] + ubfx x11,x13,#14,#26 + umlal v20.2d,v17.2s,v6.s[2] + add x8,x8,x9,lsl#32 // bfi x8,x9,#32,#32 + umlal v19.2d,v17.2s,v4.s[2] + fmov d15,x6 + + add v11.2s,v11.2s,v26.2s + add x12,x3,x12,lsr#40 + umlal v23.2d,v18.2s,v0.s[2] + add x13,x3,x13,lsr#40 + umlal v22.2d,v18.2s,v8.s[2] + add x10,x10,x11,lsl#32 // bfi x10,x11,#32,#32 + umlal v21.2d,v18.2s,v6.s[2] + add x12,x12,x13,lsl#32 // bfi x12,x13,#32,#32 + umlal v20.2d,v18.2s,v4.s[2] + fmov d16,x8 + umlal v19.2d,v18.2s,v2.s[2] + fmov d17,x10 + + //////////////////////////////////////////////////////////////// + // (hash+inp[0:1])*r^4 and accumulate + + add v9.2s,v9.2s,v24.2s + fmov d18,x12 + umlal v22.2d,v11.2s,v1.s[0] + ldp x8,x12,[x1],#16 // inp[0:1] + umlal v19.2d,v11.2s,v6.s[0] + ldp x9,x13,[x1],#48 + umlal v23.2d,v11.2s,v3.s[0] + umlal v20.2d,v11.2s,v8.s[0] + umlal v21.2d,v11.2s,v0.s[0] +#ifdef __AARCH64EB__ + rev x8,x8 + rev x12,x12 + rev x9,x9 + rev x13,x13 +#endif + + add v10.2s,v10.2s,v25.2s + umlal v22.2d,v9.2s,v5.s[0] + umlal v23.2d,v9.2s,v7.s[0] + and x4,x8,#0x03ffffff // base 2^64 -> base 2^26 + umlal v21.2d,v9.2s,v3.s[0] + and x5,x9,#0x03ffffff + umlal v19.2d,v9.2s,v0.s[0] + ubfx x6,x8,#26,#26 + umlal v20.2d,v9.2s,v1.s[0] + ubfx x7,x9,#26,#26 + + add v12.2s,v12.2s,v27.2s + add x4,x4,x5,lsl#32 // bfi x4,x5,#32,#32 + umlal v22.2d,v10.2s,v3.s[0] + extr x8,x12,x8,#52 + umlal v23.2d,v10.2s,v5.s[0] + extr x9,x13,x9,#52 + umlal v19.2d,v10.2s,v8.s[0] + add x6,x6,x7,lsl#32 // bfi x6,x7,#32,#32 + umlal v21.2d,v10.2s,v1.s[0] + fmov d9,x4 + umlal v20.2d,v10.2s,v0.s[0] + and x8,x8,#0x03ffffff + + add v13.2s,v13.2s,v28.2s + and x9,x9,#0x03ffffff + umlal v22.2d,v12.2s,v0.s[0] + ubfx x10,x12,#14,#26 + umlal v19.2d,v12.2s,v4.s[0] + ubfx x11,x13,#14,#26 + umlal v23.2d,v12.2s,v1.s[0] + add x8,x8,x9,lsl#32 // bfi x8,x9,#32,#32 + umlal v20.2d,v12.2s,v6.s[0] + fmov d10,x6 + umlal v21.2d,v12.2s,v8.s[0] + add x12,x3,x12,lsr#40 + + umlal v22.2d,v13.2s,v8.s[0] + add x13,x3,x13,lsr#40 + umlal v19.2d,v13.2s,v2.s[0] + add x10,x10,x11,lsl#32 // bfi x10,x11,#32,#32 + umlal v23.2d,v13.2s,v0.s[0] + add x12,x12,x13,lsl#32 // bfi x12,x13,#32,#32 + umlal v20.2d,v13.2s,v4.s[0] + fmov d11,x8 + umlal v21.2d,v13.2s,v6.s[0] + fmov d12,x10 + fmov d13,x12 + + ///////////////////////////////////////////////////////////////// + // lazy reduction as discussed in "NEON crypto" by D.J. Bernstein + // and P. Schwabe + // + // [see discussion in poly1305-armv4 module] + + ushr v29.2d,v22.2d,#26 + xtn v27.2s,v22.2d + ushr v30.2d,v19.2d,#26 + and v19.16b,v19.16b,v31.16b + add v23.2d,v23.2d,v29.2d // h3 -> h4 + bic v27.2s,#0xfc,lsl#24 // &=0x03ffffff + add v20.2d,v20.2d,v30.2d // h0 -> h1 + + ushr v29.2d,v23.2d,#26 + xtn v28.2s,v23.2d + ushr v30.2d,v20.2d,#26 + xtn v25.2s,v20.2d + bic v28.2s,#0xfc,lsl#24 + add v21.2d,v21.2d,v30.2d // h1 -> h2 + + add v19.2d,v19.2d,v29.2d + shl v29.2d,v29.2d,#2 + shrn v30.2s,v21.2d,#26 + xtn v26.2s,v21.2d + add v19.2d,v19.2d,v29.2d // h4 -> h0 + bic v25.2s,#0xfc,lsl#24 + add v27.2s,v27.2s,v30.2s // h2 -> h3 + bic v26.2s,#0xfc,lsl#24 + + shrn v29.2s,v19.2d,#26 + xtn v24.2s,v19.2d + ushr v30.2s,v27.2s,#26 + bic v27.2s,#0xfc,lsl#24 + bic v24.2s,#0xfc,lsl#24 + add v25.2s,v25.2s,v29.2s // h0 -> h1 + add v28.2s,v28.2s,v30.2s // h3 -> h4 + + b.hi .Loop_neon + +.Lskip_loop: + dup v16.2d,v16.d[0] + add v11.2s,v11.2s,v26.2s + + //////////////////////////////////////////////////////////////// + // multiply (inp[0:1]+hash) or inp[2:3] by r^2:r^1 + + adds x2,x2,#32 + b.ne .Long_tail + + dup v16.2d,v11.d[0] + add v14.2s,v9.2s,v24.2s + add v17.2s,v12.2s,v27.2s + add v15.2s,v10.2s,v25.2s + add v18.2s,v13.2s,v28.2s + +.Long_tail: + dup v14.2d,v14.d[0] + umull2 v19.2d,v16.4s,v6.4s + umull2 v22.2d,v16.4s,v1.4s + umull2 v23.2d,v16.4s,v3.4s + umull2 v21.2d,v16.4s,v0.4s + umull2 v20.2d,v16.4s,v8.4s + + dup v15.2d,v15.d[0] + umlal2 v19.2d,v14.4s,v0.4s + umlal2 v21.2d,v14.4s,v3.4s + umlal2 v22.2d,v14.4s,v5.4s + umlal2 v23.2d,v14.4s,v7.4s + umlal2 v20.2d,v14.4s,v1.4s + + dup v17.2d,v17.d[0] + umlal2 v19.2d,v15.4s,v8.4s + umlal2 v22.2d,v15.4s,v3.4s + umlal2 v21.2d,v15.4s,v1.4s + umlal2 v23.2d,v15.4s,v5.4s + umlal2 v20.2d,v15.4s,v0.4s + + dup v18.2d,v18.d[0] + umlal2 v22.2d,v17.4s,v0.4s + umlal2 v23.2d,v17.4s,v1.4s + umlal2 v19.2d,v17.4s,v4.4s + umlal2 v20.2d,v17.4s,v6.4s + umlal2 v21.2d,v17.4s,v8.4s + + umlal2 v22.2d,v18.4s,v8.4s + umlal2 v19.2d,v18.4s,v2.4s + umlal2 v23.2d,v18.4s,v0.4s + umlal2 v20.2d,v18.4s,v4.4s + umlal2 v21.2d,v18.4s,v6.4s + + b.eq .Lshort_tail + + //////////////////////////////////////////////////////////////// + // (hash+inp[0:1])*r^4:r^3 and accumulate + + add v9.2s,v9.2s,v24.2s + umlal v22.2d,v11.2s,v1.2s + umlal v19.2d,v11.2s,v6.2s + umlal v23.2d,v11.2s,v3.2s + umlal v20.2d,v11.2s,v8.2s + umlal v21.2d,v11.2s,v0.2s + + add v10.2s,v10.2s,v25.2s + umlal v22.2d,v9.2s,v5.2s + umlal v19.2d,v9.2s,v0.2s + umlal v23.2d,v9.2s,v7.2s + umlal v20.2d,v9.2s,v1.2s + umlal v21.2d,v9.2s,v3.2s + + add v12.2s,v12.2s,v27.2s + umlal v22.2d,v10.2s,v3.2s + umlal v19.2d,v10.2s,v8.2s + umlal v23.2d,v10.2s,v5.2s + umlal v20.2d,v10.2s,v0.2s + umlal v21.2d,v10.2s,v1.2s + + add v13.2s,v13.2s,v28.2s + umlal v22.2d,v12.2s,v0.2s + umlal v19.2d,v12.2s,v4.2s + umlal v23.2d,v12.2s,v1.2s + umlal v20.2d,v12.2s,v6.2s + umlal v21.2d,v12.2s,v8.2s + + umlal v22.2d,v13.2s,v8.2s + umlal v19.2d,v13.2s,v2.2s + umlal v23.2d,v13.2s,v0.2s + umlal v20.2d,v13.2s,v4.2s + umlal v21.2d,v13.2s,v6.2s + +.Lshort_tail: + //////////////////////////////////////////////////////////////// + // horizontal add + + addp v22.2d,v22.2d,v22.2d + ldp d8,d9,[sp,#16] // meet ABI requirements + addp v19.2d,v19.2d,v19.2d + ldp d10,d11,[sp,#32] + addp v23.2d,v23.2d,v23.2d + ldp d12,d13,[sp,#48] + addp v20.2d,v20.2d,v20.2d + ldp d14,d15,[sp,#64] + addp v21.2d,v21.2d,v21.2d + ldr x30,[sp,#8] + .inst 0xd50323bf // autiasp + + //////////////////////////////////////////////////////////////// + // lazy reduction, but without narrowing + + ushr v29.2d,v22.2d,#26 + and v22.16b,v22.16b,v31.16b + ushr v30.2d,v19.2d,#26 + and v19.16b,v19.16b,v31.16b + + add v23.2d,v23.2d,v29.2d // h3 -> h4 + add v20.2d,v20.2d,v30.2d // h0 -> h1 + + ushr v29.2d,v23.2d,#26 + and v23.16b,v23.16b,v31.16b + ushr v30.2d,v20.2d,#26 + and v20.16b,v20.16b,v31.16b + add v21.2d,v21.2d,v30.2d // h1 -> h2 + + add v19.2d,v19.2d,v29.2d + shl v29.2d,v29.2d,#2 + ushr v30.2d,v21.2d,#26 + and v21.16b,v21.16b,v31.16b + add v19.2d,v19.2d,v29.2d // h4 -> h0 + add v22.2d,v22.2d,v30.2d // h2 -> h3 + + ushr v29.2d,v19.2d,#26 + and v19.16b,v19.16b,v31.16b + ushr v30.2d,v22.2d,#26 + and v22.16b,v22.16b,v31.16b + add v20.2d,v20.2d,v29.2d // h0 -> h1 + add v23.2d,v23.2d,v30.2d // h3 -> h4 + + //////////////////////////////////////////////////////////////// + // write the result, can be partially reduced + + st4 {v19.s,v20.s,v21.s,v22.s}[0],[x0],#16 + mov x4,#1 + st1 {v23.s}[0],[x0] + str x4,[x0,#8] // set is_base2_26 + + ldr x29,[sp],#80 + ret +.size poly1305_blocks_neon,.-poly1305_blocks_neon + +.align 5 +.Lzeros: +.long 0,0,0,0,0,0,0,0 +.asciz "Poly1305 for ARMv8, CRYPTOGAMS by @dot-asm" +.align 2 +#if !defined(__KERNEL__) && !defined(_WIN64) +.comm OPENSSL_armcap_P,4,4 +.hidden OPENSSL_armcap_P +#endif diff --git a/arch/arm64/crypto/poly1305-glue.c b/arch/arm64/crypto/poly1305-glue.c new file mode 100644 index 000000000000..83a2338a8826 --- /dev/null +++ b/arch/arm64/crypto/poly1305-glue.c @@ -0,0 +1,238 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * OpenSSL/Cryptogams accelerated Poly1305 transform for arm64 + * + * Copyright (C) 2019 Linaro Ltd. <ard.biesheuvel@linaro.org> + */ + +#include <asm/hwcap.h> +#include <asm/neon.h> +#include <asm/simd.h> +#include <asm/unaligned.h> +#include <crypto/algapi.h> +#include <crypto/internal/hash.h> +#include <crypto/internal/poly1305.h> +#include <crypto/internal/simd.h> +#include <linux/cpufeature.h> +#include <linux/crypto.h> +#include <linux/jump_label.h> +#include <linux/module.h> + +asmlinkage void poly1305_init_arm64(void *state, const u8 *key); +asmlinkage void poly1305_blocks(void *state, const u8 *src, u32 len, u32 hibit); +asmlinkage void poly1305_blocks_neon(void *state, const u8 *src, u32 len, u32 hibit); +asmlinkage void poly1305_emit(void *state, __le32 *digest, const u32 *nonce); + +static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon); + +void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 *key) +{ + poly1305_init_arm64(&dctx->h, key); + dctx->s[0] = get_unaligned_le32(key + 16); + dctx->s[1] = get_unaligned_le32(key + 20); + dctx->s[2] = get_unaligned_le32(key + 24); + dctx->s[3] = get_unaligned_le32(key + 28); + dctx->buflen = 0; +} +EXPORT_SYMBOL(poly1305_init_arch); + +static int neon_poly1305_init(struct shash_desc *desc) +{ + struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc); + + dctx->buflen = 0; + dctx->rset = 0; + dctx->sset = false; + + return 0; +} + +static void neon_poly1305_blocks(struct poly1305_desc_ctx *dctx, const u8 *src, + u32 len, u32 hibit, bool do_neon) +{ + if (unlikely(!dctx->sset)) { + if (!dctx->rset) { + poly1305_init_arch(dctx, src); + src += POLY1305_BLOCK_SIZE; + len -= POLY1305_BLOCK_SIZE; + dctx->rset = 1; + } + if (len >= POLY1305_BLOCK_SIZE) { + dctx->s[0] = get_unaligned_le32(src + 0); + dctx->s[1] = get_unaligned_le32(src + 4); + dctx->s[2] = get_unaligned_le32(src + 8); + dctx->s[3] = get_unaligned_le32(src + 12); + src += POLY1305_BLOCK_SIZE; + len -= POLY1305_BLOCK_SIZE; + dctx->sset = true; + } + if (len < POLY1305_BLOCK_SIZE) + return; + } + + len &= ~(POLY1305_BLOCK_SIZE - 1); + + if (static_branch_likely(&have_neon) && likely(do_neon)) + poly1305_blocks_neon(&dctx->h, src, len, hibit); + else + poly1305_blocks(&dctx->h, src, len, hibit); +} + +static void neon_poly1305_do_update(struct poly1305_desc_ctx *dctx, + const u8 *src, u32 len, bool do_neon) +{ + if (unlikely(dctx->buflen)) { + u32 bytes = min(len, POLY1305_BLOCK_SIZE - dctx->buflen); + + memcpy(dctx->buf + dctx->buflen, src, bytes); + src += bytes; + len -= bytes; + dctx->buflen += bytes; + + if (dctx->buflen == POLY1305_BLOCK_SIZE) { + neon_poly1305_blocks(dctx, dctx->buf, + POLY1305_BLOCK_SIZE, 1, false); + dctx->buflen = 0; + } + } + + if (likely(len >= POLY1305_BLOCK_SIZE)) { + neon_poly1305_blocks(dctx, src, len, 1, do_neon); + src += round_down(len, POLY1305_BLOCK_SIZE); + len %= POLY1305_BLOCK_SIZE; + } + + if (unlikely(len)) { + dctx->buflen = len; + memcpy(dctx->buf, src, len); + } +} + +static int neon_poly1305_update(struct shash_desc *desc, + const u8 *src, unsigned int srclen) +{ + bool do_neon = crypto_simd_usable() && srclen > 128; + struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc); + + if (static_branch_likely(&have_neon) && do_neon) + kernel_neon_begin(); + neon_poly1305_do_update(dctx, src, srclen, do_neon); + if (static_branch_likely(&have_neon) && do_neon) + kernel_neon_end(); + return 0; +} + +void poly1305_update_arch(struct poly1305_desc_ctx *dctx, const u8 *src, + unsigned int nbytes) +{ + if (unlikely(dctx->buflen)) { + u32 bytes = min(nbytes, POLY1305_BLOCK_SIZE - dctx->buflen); + + memcpy(dctx->buf + dctx->buflen, src, bytes); + src += bytes; + nbytes -= bytes; + dctx->buflen += bytes; + + if (dctx->buflen == POLY1305_BLOCK_SIZE) { + poly1305_blocks(&dctx->h, dctx->buf, POLY1305_BLOCK_SIZE, 1); + dctx->buflen = 0; + } + } + + if (likely(nbytes >= POLY1305_BLOCK_SIZE)) { + unsigned int len = round_down(nbytes, POLY1305_BLOCK_SIZE); + + if (static_branch_likely(&have_neon) && crypto_simd_usable()) { + kernel_neon_begin(); + poly1305_blocks_neon(&dctx->h, src, len, 1); + kernel_neon_end(); + } else { + poly1305_blocks(&dctx->h, src, len, 1); + } + src += len; + nbytes %= POLY1305_BLOCK_SIZE; + } + + if (unlikely(nbytes)) { + dctx->buflen = nbytes; + memcpy(dctx->buf, src, nbytes); + } +} +EXPORT_SYMBOL(poly1305_update_arch); + +void poly1305_final_arch(struct poly1305_desc_ctx *dctx, u8 *dst) +{ + __le32 digest[4]; + u64 f = 0; + + if (unlikely(dctx->buflen)) { + dctx->buf[dctx->buflen++] = 1; + memset(dctx->buf + dctx->buflen, 0, + POLY1305_BLOCK_SIZE - dctx->buflen); + poly1305_blocks(&dctx->h, dctx->buf, POLY1305_BLOCK_SIZE, 0); + } + + poly1305_emit(&dctx->h, digest, dctx->s); + + /* mac = (h + s) % (2^128) */ + f = (f >> 32) + le32_to_cpu(digest[0]); + put_unaligned_le32(f, dst); + f = (f >> 32) + le32_to_cpu(digest[1]); + put_unaligned_le32(f, dst + 4); + f = (f >> 32) + le32_to_cpu(digest[2]); + put_unaligned_le32(f, dst + 8); + f = (f >> 32) + le32_to_cpu(digest[3]); + put_unaligned_le32(f, dst + 12); + + *dctx = (struct poly1305_desc_ctx){}; +} +EXPORT_SYMBOL(poly1305_final_arch); + +static int neon_poly1305_final(struct shash_desc *desc, u8 *dst) +{ + struct poly1305_desc_ctx *dctx = shash_desc_ctx(desc); + + if (unlikely(!dctx->sset)) + return -ENOKEY; + + poly1305_final_arch(dctx, dst); + return 0; +} + +static struct shash_alg neon_poly1305_alg = { + .init = neon_poly1305_init, + .update = neon_poly1305_update, + .final = neon_poly1305_final, + .digestsize = POLY1305_DIGEST_SIZE, + .descsize = sizeof(struct poly1305_desc_ctx), + + .base.cra_name = "poly1305", + .base.cra_driver_name = "poly1305-neon", + .base.cra_priority = 200, + .base.cra_blocksize = POLY1305_BLOCK_SIZE, + .base.cra_module = THIS_MODULE, +}; + +static int __init neon_poly1305_mod_init(void) +{ + if (!cpu_have_named_feature(ASIMD)) + return 0; + + static_branch_enable(&have_neon); + + return IS_REACHABLE(CONFIG_CRYPTO_HASH) ? + crypto_register_shash(&neon_poly1305_alg) : 0; +} + +static void __exit neon_poly1305_mod_exit(void) +{ + if (IS_REACHABLE(CONFIG_CRYPTO_HASH) && cpu_have_named_feature(ASIMD)) + crypto_unregister_shash(&neon_poly1305_alg); +} + +module_init(neon_poly1305_mod_init); +module_exit(neon_poly1305_mod_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS_CRYPTO("poly1305"); +MODULE_ALIAS_CRYPTO("poly1305-neon"); diff --git a/arch/arm64/include/asm/Kbuild b/arch/arm64/include/asm/Kbuild index 98a5405c8558..bd23f87d6c55 100644 --- a/arch/arm64/include/asm/Kbuild +++ b/arch/arm64/include/asm/Kbuild @@ -16,7 +16,6 @@ generic-y += local64.h generic-y += mcs_spinlock.h generic-y += mm-arch-hooks.h generic-y += mmiowb.h -generic-y += msi.h generic-y += qrwlock.h generic-y += qspinlock.h generic-y += serial.h diff --git a/arch/arm64/include/asm/asm-uaccess.h b/arch/arm64/include/asm/asm-uaccess.h index f74909ba29bd..f68a0e64482a 100644 --- a/arch/arm64/include/asm/asm-uaccess.h +++ b/arch/arm64/include/asm/asm-uaccess.h @@ -58,30 +58,4 @@ alternative_else_nop_endif .endm #endif -/* - * These macros are no-ops when UAO is present. - */ - .macro uaccess_disable_not_uao, tmp1, tmp2 - uaccess_ttbr0_disable \tmp1, \tmp2 -alternative_if ARM64_ALT_PAN_NOT_UAO - SET_PSTATE_PAN(1) -alternative_else_nop_endif - .endm - - .macro uaccess_enable_not_uao, tmp1, tmp2, tmp3 - uaccess_ttbr0_enable \tmp1, \tmp2, \tmp3 -alternative_if ARM64_ALT_PAN_NOT_UAO - SET_PSTATE_PAN(0) -alternative_else_nop_endif - .endm - -/* - * Remove the address tag from a virtual address, if present. - */ - .macro clear_address_tag, dst, addr - tst \addr, #(1 << 55) - bic \dst, \addr, #(0xff << 56) - csel \dst, \dst, \addr, eq - .endm - #endif diff --git a/arch/arm64/include/asm/barrier.h b/arch/arm64/include/asm/barrier.h index e0e2b1946f42..7d9cc5ec4971 100644 --- a/arch/arm64/include/asm/barrier.h +++ b/arch/arm64/include/asm/barrier.h @@ -29,6 +29,18 @@ SB_BARRIER_INSN"nop\n", \ ARM64_HAS_SB)) +#ifdef CONFIG_ARM64_PSEUDO_NMI +#define pmr_sync() \ + do { \ + extern struct static_key_false gic_pmr_sync; \ + \ + if (static_branch_unlikely(&gic_pmr_sync)) \ + dsb(sy); \ + } while(0) +#else +#define pmr_sync() do {} while (0) +#endif + #define mb() dsb(sy) #define rmb() dsb(ld) #define wmb() dsb(st) diff --git a/arch/arm64/include/asm/cache.h b/arch/arm64/include/asm/cache.h index 43da6dd29592..806e9dc2a852 100644 --- a/arch/arm64/include/asm/cache.h +++ b/arch/arm64/include/asm/cache.h @@ -11,6 +11,7 @@ #define CTR_L1IP_MASK 3 #define CTR_DMINLINE_SHIFT 16 #define CTR_IMINLINE_SHIFT 0 +#define CTR_IMINLINE_MASK 0xf #define CTR_ERG_SHIFT 20 #define CTR_CWG_SHIFT 24 #define CTR_CWG_MASK 15 @@ -18,7 +19,7 @@ #define CTR_DIC_SHIFT 29 #define CTR_CACHE_MINLINE_MASK \ - (0xf << CTR_DMINLINE_SHIFT | 0xf << CTR_IMINLINE_SHIFT) + (0xf << CTR_DMINLINE_SHIFT | CTR_IMINLINE_MASK << CTR_IMINLINE_SHIFT) #define CTR_L1IP(ctr) (((ctr) >> CTR_L1IP_SHIFT) & CTR_L1IP_MASK) diff --git a/arch/arm64/include/asm/cpucaps.h b/arch/arm64/include/asm/cpucaps.h index f19fe4b9acc4..b92683871119 100644 --- a/arch/arm64/include/asm/cpucaps.h +++ b/arch/arm64/include/asm/cpucaps.h @@ -52,7 +52,11 @@ #define ARM64_HAS_IRQ_PRIO_MASKING 42 #define ARM64_HAS_DCPODP 43 #define ARM64_WORKAROUND_1463225 44 +#define ARM64_WORKAROUND_CAVIUM_TX2_219_TVM 45 +#define ARM64_WORKAROUND_CAVIUM_TX2_219_PRFM 46 +#define ARM64_WORKAROUND_1542419 47 +#define ARM64_WORKAROUND_1319367 48 -#define ARM64_NCAPS 45 +#define ARM64_NCAPS 49 #endif /* __ASM_CPUCAPS_H */ diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h index 9cde5d2e768f..4261d55e8506 100644 --- a/arch/arm64/include/asm/cpufeature.h +++ b/arch/arm64/include/asm/cpufeature.h @@ -659,6 +659,20 @@ static inline u32 id_aa64mmfr0_parange_to_phys_shift(int parange) default: return CONFIG_ARM64_PA_BITS; } } + +/* Check whether hardware update of the Access flag is supported */ +static inline bool cpu_has_hw_af(void) +{ + u64 mmfr1; + + if (!IS_ENABLED(CONFIG_ARM64_HW_AFDBM)) + return false; + + mmfr1 = read_cpuid(ID_AA64MMFR1_EL1); + return cpuid_feature_extract_unsigned_field(mmfr1, + ID_AA64MMFR1_HADBS_SHIFT); +} + #endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h index b1454d117cd2..aca07c2f6e6e 100644 --- a/arch/arm64/include/asm/cputype.h +++ b/arch/arm64/include/asm/cputype.h @@ -79,6 +79,7 @@ #define CAVIUM_CPU_PART_THUNDERX_83XX 0x0A3 #define CAVIUM_CPU_PART_THUNDERX2 0x0AF +#define BRCM_CPU_PART_BRAHMA_B53 0x100 #define BRCM_CPU_PART_VULCAN 0x516 #define QCOM_CPU_PART_FALKOR_V1 0x800 @@ -105,6 +106,7 @@ #define MIDR_THUNDERX_81XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_81XX) #define MIDR_THUNDERX_83XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_83XX) #define MIDR_CAVIUM_THUNDERX2 MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX2) +#define MIDR_BRAHMA_B53 MIDR_CPU_MODEL(ARM_CPU_IMP_BRCM, BRCM_CPU_PART_BRAHMA_B53) #define MIDR_BRCM_VULCAN MIDR_CPU_MODEL(ARM_CPU_IMP_BRCM, BRCM_CPU_PART_VULCAN) #define MIDR_QCOM_FALKOR_V1 MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_FALKOR_V1) #define MIDR_QCOM_FALKOR MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_FALKOR) diff --git a/arch/arm64/include/asm/daifflags.h b/arch/arm64/include/asm/daifflags.h index 063c964af705..72acd2db167f 100644 --- a/arch/arm64/include/asm/daifflags.h +++ b/arch/arm64/include/asm/daifflags.h @@ -8,7 +8,9 @@ #include <linux/irqflags.h> #include <asm/arch_gicv3.h> +#include <asm/barrier.h> #include <asm/cpufeature.h> +#include <asm/ptrace.h> #define DAIF_PROCCTX 0 #define DAIF_PROCCTX_NOIRQ PSR_I_BIT @@ -65,7 +67,7 @@ static inline void local_daif_restore(unsigned long flags) if (system_uses_irq_prio_masking()) { gic_write_pmr(GIC_PRIO_IRQON); - dsb(sy); + pmr_sync(); } } else if (system_uses_irq_prio_masking()) { u64 pmr; @@ -109,4 +111,19 @@ static inline void local_daif_restore(unsigned long flags) trace_hardirqs_off(); } +/* + * Called by synchronous exception handlers to restore the DAIF bits that were + * modified by taking an exception. + */ +static inline void local_daif_inherit(struct pt_regs *regs) +{ + unsigned long flags = regs->pstate & DAIF_MASK; + + /* + * We can't use local_daif_restore(regs->pstate) here as + * system_has_prio_mask_debugging() won't restore the I bit if it can + * use the pmr instead. + */ + write_sysreg(flags, daif); +} #endif diff --git a/arch/arm64/include/asm/exception.h b/arch/arm64/include/asm/exception.h index a17393ff6677..4d5f3b5f50cd 100644 --- a/arch/arm64/include/asm/exception.h +++ b/arch/arm64/include/asm/exception.h @@ -8,14 +8,15 @@ #define __ASM_EXCEPTION_H #include <asm/esr.h> +#include <asm/kprobes.h> +#include <asm/ptrace.h> #include <linux/interrupt.h> -#define __exception __attribute__((section(".exception.text"))) #ifdef CONFIG_FUNCTION_GRAPH_TRACER #define __exception_irq_entry __irq_entry #else -#define __exception_irq_entry __exception +#define __exception_irq_entry __kprobes #endif static inline u32 disr_to_esr(u64 disr) @@ -31,5 +32,22 @@ static inline u32 disr_to_esr(u64 disr) } asmlinkage void enter_from_user_mode(void); +void do_mem_abort(unsigned long addr, unsigned int esr, struct pt_regs *regs); +void do_sp_pc_abort(unsigned long addr, unsigned int esr, struct pt_regs *regs); +void do_undefinstr(struct pt_regs *regs); +asmlinkage void bad_mode(struct pt_regs *regs, int reason, unsigned int esr); +void do_debug_exception(unsigned long addr_if_watchpoint, unsigned int esr, + struct pt_regs *regs); +void do_fpsimd_acc(unsigned int esr, struct pt_regs *regs); +void do_sve_acc(unsigned int esr, struct pt_regs *regs); +void do_fpsimd_exc(unsigned int esr, struct pt_regs *regs); +void do_sysinstr(unsigned int esr, struct pt_regs *regs); +void do_sp_pc_abort(unsigned long addr, unsigned int esr, struct pt_regs *regs); +void bad_el0_sync(struct pt_regs *regs, int reason, unsigned int esr); +void do_cp15instr(unsigned int esr, struct pt_regs *regs); +void el0_svc_handler(struct pt_regs *regs); +void el0_svc_compat_handler(struct pt_regs *regs); +void do_el0_ia_bp_hardening(unsigned long addr, unsigned int esr, + struct pt_regs *regs); #endif /* __ASM_EXCEPTION_H */ diff --git a/arch/arm64/include/asm/ftrace.h b/arch/arm64/include/asm/ftrace.h index d48667b04c41..91fa4baa1a93 100644 --- a/arch/arm64/include/asm/ftrace.h +++ b/arch/arm64/include/asm/ftrace.h @@ -11,9 +11,20 @@ #include <asm/insn.h> #define HAVE_FUNCTION_GRAPH_FP_TEST + +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS +#define ARCH_SUPPORTS_FTRACE_OPS 1 +#else #define MCOUNT_ADDR ((unsigned long)_mcount) +#endif + +/* The BL at the callsite's adjusted rec->ip */ #define MCOUNT_INSN_SIZE AARCH64_INSN_SIZE +#define FTRACE_PLT_IDX 0 +#define FTRACE_REGS_PLT_IDX 1 +#define NR_FTRACE_PLTS 2 + /* * Currently, gcc tends to save the link register after the local variables * on the stack. This causes the max stack tracer to report the function @@ -44,12 +55,24 @@ extern void return_to_handler(void); static inline unsigned long ftrace_call_adjust(unsigned long addr) { /* + * Adjust addr to point at the BL in the callsite. + * See ftrace_init_nop() for the callsite sequence. + */ + if (IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_REGS)) + return addr + AARCH64_INSN_SIZE; + /* * addr is the address of the mcount call instruction. * recordmcount does the necessary offset calculation. */ return addr; } +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS +struct dyn_ftrace; +int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec); +#define ftrace_init_nop ftrace_init_nop +#endif + #define ftrace_return_address(n) return_address(n) /* diff --git a/arch/arm64/include/asm/insn.h b/arch/arm64/include/asm/insn.h index 39e7780bedd6..bb313dde58a4 100644 --- a/arch/arm64/include/asm/insn.h +++ b/arch/arm64/include/asm/insn.h @@ -440,6 +440,9 @@ u32 aarch64_insn_gen_logical_shifted_reg(enum aarch64_insn_register dst, int shift, enum aarch64_insn_variant variant, enum aarch64_insn_logic_type type); +u32 aarch64_insn_gen_move_reg(enum aarch64_insn_register dst, + enum aarch64_insn_register src, + enum aarch64_insn_variant variant); u32 aarch64_insn_gen_logical_immediate(enum aarch64_insn_logic_type type, enum aarch64_insn_variant variant, enum aarch64_insn_register Rn, diff --git a/arch/arm64/include/asm/io.h b/arch/arm64/include/asm/io.h index 323cb306bd28..4e531f57147d 100644 --- a/arch/arm64/include/asm/io.h +++ b/arch/arm64/include/asm/io.h @@ -167,9 +167,7 @@ extern void iounmap(volatile void __iomem *addr); extern void __iomem *ioremap_cache(phys_addr_t phys_addr, size_t size); #define ioremap(addr, size) __ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE)) -#define ioremap_nocache(addr, size) __ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE)) #define ioremap_wc(addr, size) __ioremap((addr), (size), __pgprot(PROT_NORMAL_NC)) -#define ioremap_wt(addr, size) __ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE)) /* * PCI configuration space mapping function. diff --git a/arch/arm64/include/asm/irqflags.h b/arch/arm64/include/asm/irqflags.h index 1a59f0ed1ae3..aa4b6521ef14 100644 --- a/arch/arm64/include/asm/irqflags.h +++ b/arch/arm64/include/asm/irqflags.h @@ -6,6 +6,7 @@ #define __ASM_IRQFLAGS_H #include <asm/alternative.h> +#include <asm/barrier.h> #include <asm/ptrace.h> #include <asm/sysreg.h> @@ -34,14 +35,14 @@ static inline void arch_local_irq_enable(void) } asm volatile(ALTERNATIVE( - "msr daifclr, #2 // arch_local_irq_enable\n" - "nop", - __msr_s(SYS_ICC_PMR_EL1, "%0") - "dsb sy", + "msr daifclr, #2 // arch_local_irq_enable", + __msr_s(SYS_ICC_PMR_EL1, "%0"), ARM64_HAS_IRQ_PRIO_MASKING) : : "r" ((unsigned long) GIC_PRIO_IRQON) : "memory"); + + pmr_sync(); } static inline void arch_local_irq_disable(void) @@ -116,14 +117,14 @@ static inline unsigned long arch_local_irq_save(void) static inline void arch_local_irq_restore(unsigned long flags) { asm volatile(ALTERNATIVE( - "msr daif, %0\n" - "nop", - __msr_s(SYS_ICC_PMR_EL1, "%0") - "dsb sy", - ARM64_HAS_IRQ_PRIO_MASKING) + "msr daif, %0", + __msr_s(SYS_ICC_PMR_EL1, "%0"), + ARM64_HAS_IRQ_PRIO_MASKING) : : "r" (flags) : "memory"); + + pmr_sync(); } #endif /* __ASM_IRQFLAGS_H */ diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h index ddf9d762ac62..6e5d839f42b5 100644 --- a/arch/arm64/include/asm/kvm_arm.h +++ b/arch/arm64/include/asm/kvm_arm.h @@ -61,7 +61,6 @@ * RW: 64bit by default, can be overridden for 32bit VMs * TAC: Trap ACTLR * TSC: Trap SMC - * TVM: Trap VM ops (until M+C set in SCTLR_EL1) * TSW: Trap cache operations by set/way * TWE: Trap WFE * TWI: Trap WFI @@ -74,7 +73,7 @@ * SWIO: Turn set/way invalidates into set/way clean+invalidate */ #define HCR_GUEST_FLAGS (HCR_TSC | HCR_TSW | HCR_TWE | HCR_TWI | HCR_VM | \ - HCR_TVM | HCR_BSU_IS | HCR_FB | HCR_TAC | \ + HCR_BSU_IS | HCR_FB | HCR_TAC | \ HCR_AMO | HCR_SWIO | HCR_TIDCP | HCR_RW | HCR_TLOR | \ HCR_FMO | HCR_IMO) #define HCR_VIRT_EXCP_MASK (HCR_VSE | HCR_VI | HCR_VF) diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h index d69c1efc63e7..5efe5ca8fecf 100644 --- a/arch/arm64/include/asm/kvm_emulate.h +++ b/arch/arm64/include/asm/kvm_emulate.h @@ -53,8 +53,18 @@ static inline void vcpu_reset_hcr(struct kvm_vcpu *vcpu) /* trap error record accesses */ vcpu->arch.hcr_el2 |= HCR_TERR; } - if (cpus_have_const_cap(ARM64_HAS_STAGE2_FWB)) + + if (cpus_have_const_cap(ARM64_HAS_STAGE2_FWB)) { vcpu->arch.hcr_el2 |= HCR_FWB; + } else { + /* + * For non-FWB CPUs, we trap VM ops (HCR_EL2.TVM) until M+C + * get set in SCTLR_EL1 such that we can detect when the guest + * MMU gets turned on and do the necessary cache maintenance + * then. + */ + vcpu->arch.hcr_el2 |= HCR_TVM; + } if (test_bit(KVM_ARM_VCPU_EL1_32BIT, vcpu->arch.features)) vcpu->arch.hcr_el2 &= ~HCR_RW; @@ -77,14 +87,19 @@ static inline unsigned long *vcpu_hcr(struct kvm_vcpu *vcpu) return (unsigned long *)&vcpu->arch.hcr_el2; } -static inline void vcpu_clear_wfe_traps(struct kvm_vcpu *vcpu) +static inline void vcpu_clear_wfx_traps(struct kvm_vcpu *vcpu) { vcpu->arch.hcr_el2 &= ~HCR_TWE; + if (atomic_read(&vcpu->arch.vgic_cpu.vgic_v3.its_vpe.vlpi_count)) + vcpu->arch.hcr_el2 &= ~HCR_TWI; + else + vcpu->arch.hcr_el2 |= HCR_TWI; } -static inline void vcpu_set_wfe_traps(struct kvm_vcpu *vcpu) +static inline void vcpu_set_wfx_traps(struct kvm_vcpu *vcpu) { vcpu->arch.hcr_el2 |= HCR_TWE; + vcpu->arch.hcr_el2 |= HCR_TWI; } static inline void vcpu_ptrauth_enable(struct kvm_vcpu *vcpu) @@ -258,6 +273,11 @@ static inline bool kvm_vcpu_dabt_isvalid(const struct kvm_vcpu *vcpu) return !!(kvm_vcpu_get_hsr(vcpu) & ESR_ELx_ISV); } +static inline unsigned long kvm_vcpu_dabt_iss_nisv_sanitized(const struct kvm_vcpu *vcpu) +{ + return kvm_vcpu_get_hsr(vcpu) & (ESR_ELx_CM | ESR_ELx_WNR | ESR_ELx_FSC); +} + static inline bool kvm_vcpu_dabt_issext(const struct kvm_vcpu *vcpu) { return !!(kvm_vcpu_get_hsr(vcpu) & ESR_ELx_SSE); diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index f656169db8c3..c61260cf63c5 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -44,6 +44,7 @@ KVM_ARCH_REQ_FLAGS(0, KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP) #define KVM_REQ_IRQ_PENDING KVM_ARCH_REQ(1) #define KVM_REQ_VCPU_RESET KVM_ARCH_REQ(2) +#define KVM_REQ_RECORD_STEAL KVM_ARCH_REQ(3) DECLARE_STATIC_KEY_FALSE(userspace_irqchip_in_use); @@ -83,6 +84,14 @@ struct kvm_arch { /* Mandated version of PSCI */ u32 psci_version; + + /* + * If we encounter a data abort without valid instruction syndrome + * information, report this to user space. User space can (and + * should) opt in to this feature if KVM_CAP_ARM_NISV_TO_USER is + * supported. + */ + bool return_nisv_io_abort_to_user; }; #define KVM_NR_MEM_OBJS 40 @@ -338,6 +347,13 @@ struct kvm_vcpu_arch { /* True when deferrable sysregs are loaded on the physical CPU, * see kvm_vcpu_load_sysregs and kvm_vcpu_put_sysregs. */ bool sysregs_loaded_on_cpu; + + /* Guest PV state */ + struct { + u64 steal; + u64 last_steal; + gpa_t base; + } steal; }; /* Pointer to the vcpu's SVE FFR for sve_{save,load}_state() */ @@ -478,6 +494,27 @@ void handle_exit_early(struct kvm_vcpu *vcpu, struct kvm_run *run, int kvm_perf_init(void); int kvm_perf_teardown(void); +long kvm_hypercall_pv_features(struct kvm_vcpu *vcpu); +gpa_t kvm_init_stolen_time(struct kvm_vcpu *vcpu); +void kvm_update_stolen_time(struct kvm_vcpu *vcpu); + +int kvm_arm_pvtime_set_attr(struct kvm_vcpu *vcpu, + struct kvm_device_attr *attr); +int kvm_arm_pvtime_get_attr(struct kvm_vcpu *vcpu, + struct kvm_device_attr *attr); +int kvm_arm_pvtime_has_attr(struct kvm_vcpu *vcpu, + struct kvm_device_attr *attr); + +static inline void kvm_arm_pvtime_vcpu_init(struct kvm_vcpu_arch *vcpu_arch) +{ + vcpu_arch->steal.base = GPA_INVALID; +} + +static inline bool kvm_arm_is_pvtime_enabled(struct kvm_vcpu_arch *vcpu_arch) +{ + return (vcpu_arch->steal.base != GPA_INVALID); +} + void kvm_set_sei_esr(struct kvm_vcpu *vcpu, u64 syndrome); struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr); @@ -600,8 +637,7 @@ static inline void kvm_arm_vhe_guest_enter(void) * local_daif_mask() already sets GIC_PRIO_PSR_I_SET, we just need a * dsb to ensure the redistributor is forwards EL2 IRQs to the CPU. */ - if (system_uses_irq_prio_masking()) - dsb(sy); + pmr_sync(); } static inline void kvm_arm_vhe_guest_exit(void) diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h index b61b50bf68b1..a4f9ca5479b0 100644 --- a/arch/arm64/include/asm/memory.h +++ b/arch/arm64/include/asm/memory.h @@ -69,12 +69,6 @@ #define KERNEL_START _text #define KERNEL_END _end -#ifdef CONFIG_ARM64_VA_BITS_52 -#define MAX_USER_VA_BITS 52 -#else -#define MAX_USER_VA_BITS VA_BITS -#endif - /* * Generic and tag-based KASAN require 1/8th and 1/16th of the kernel virtual * address space for the shadow region respectively. They can bloat the stack @@ -215,12 +209,18 @@ static inline unsigned long kaslr_offset(void) * up with a tagged userland pointer. Clear the tag to get a sane pointer to * pass on to access_ok(), for instance. */ -#define untagged_addr(addr) \ +#define __untagged_addr(addr) \ ((__force __typeof__(addr))sign_extend64((__force u64)(addr), 55)) +#define untagged_addr(addr) ({ \ + u64 __addr = (__force u64)addr; \ + __addr &= __untagged_addr(__addr); \ + (__force __typeof__(addr))__addr; \ +}) + #ifdef CONFIG_KASAN_SW_TAGS #define __tag_shifted(tag) ((u64)(tag) << 56) -#define __tag_reset(addr) untagged_addr(addr) +#define __tag_reset(addr) __untagged_addr(addr) #define __tag_get(addr) (__u8)((u64)(addr) >> 56) #else #define __tag_shifted(tag) 0UL diff --git a/arch/arm64/include/asm/module.h b/arch/arm64/include/asm/module.h index f80e13cbf8ec..1e93de68c044 100644 --- a/arch/arm64/include/asm/module.h +++ b/arch/arm64/include/asm/module.h @@ -21,7 +21,7 @@ struct mod_arch_specific { struct mod_plt_sec init; /* for CONFIG_DYNAMIC_FTRACE */ - struct plt_entry *ftrace_trampoline; + struct plt_entry *ftrace_trampolines; }; #endif diff --git a/arch/arm64/include/asm/paravirt.h b/arch/arm64/include/asm/paravirt.h index 799d9dd6f7cc..cf3a0fd7c1a7 100644 --- a/arch/arm64/include/asm/paravirt.h +++ b/arch/arm64/include/asm/paravirt.h @@ -21,6 +21,13 @@ static inline u64 paravirt_steal_clock(int cpu) { return pv_ops.time.steal_clock(cpu); } -#endif + +int __init pv_time_init(void); + +#else + +#define pv_time_init() do {} while (0) + +#endif // CONFIG_PARAVIRT #endif diff --git a/arch/arm64/include/asm/pgtable-hwdef.h b/arch/arm64/include/asm/pgtable-hwdef.h index 3df60f97da1f..d9fbd433cc17 100644 --- a/arch/arm64/include/asm/pgtable-hwdef.h +++ b/arch/arm64/include/asm/pgtable-hwdef.h @@ -69,7 +69,7 @@ #define PGDIR_SHIFT ARM64_HW_PGTABLE_LEVEL_SHIFT(4 - CONFIG_PGTABLE_LEVELS) #define PGDIR_SIZE (_AC(1, UL) << PGDIR_SHIFT) #define PGDIR_MASK (~(PGDIR_SIZE-1)) -#define PTRS_PER_PGD (1 << (MAX_USER_VA_BITS - PGDIR_SHIFT)) +#define PTRS_PER_PGD (1 << (VA_BITS - PGDIR_SHIFT)) /* * Section address mask and size definitions. diff --git a/arch/arm64/include/asm/pgtable-prot.h b/arch/arm64/include/asm/pgtable-prot.h index 9a21b84536f2..8dc6c5cdabe6 100644 --- a/arch/arm64/include/asm/pgtable-prot.h +++ b/arch/arm64/include/asm/pgtable-prot.h @@ -32,11 +32,11 @@ #define PROT_DEFAULT (_PROT_DEFAULT | PTE_MAYBE_NG) #define PROT_SECT_DEFAULT (_PROT_SECT_DEFAULT | PMD_MAYBE_NG) -#define PROT_DEVICE_nGnRnE (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_DEVICE_nGnRnE)) -#define PROT_DEVICE_nGnRE (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_DEVICE_nGnRE)) -#define PROT_NORMAL_NC (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL_NC)) -#define PROT_NORMAL_WT (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL_WT)) -#define PROT_NORMAL (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL)) +#define PROT_DEVICE_nGnRnE (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_WRITE | PTE_ATTRINDX(MT_DEVICE_nGnRnE)) +#define PROT_DEVICE_nGnRE (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_WRITE | PTE_ATTRINDX(MT_DEVICE_nGnRE)) +#define PROT_NORMAL_NC (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL_NC)) +#define PROT_NORMAL_WT (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL_WT)) +#define PROT_NORMAL (PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL)) #define PROT_SECT_DEVICE_nGnRE (PROT_SECT_DEFAULT | PMD_SECT_PXN | PMD_SECT_UXN | PMD_ATTRINDX(MT_DEVICE_nGnRE)) #define PROT_SECT_NORMAL (PROT_SECT_DEFAULT | PMD_SECT_PXN | PMD_SECT_UXN | PMD_ATTRINDX(MT_NORMAL)) @@ -80,8 +80,9 @@ #define PAGE_S2_DEVICE __pgprot(_PROT_DEFAULT | PAGE_S2_MEMATTR(DEVICE_nGnRE) | PTE_S2_RDONLY | PTE_S2_XN) #define PAGE_NONE __pgprot(((_PAGE_DEFAULT) & ~PTE_VALID) | PTE_PROT_NONE | PTE_RDONLY | PTE_NG | PTE_PXN | PTE_UXN) -#define PAGE_SHARED __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_WRITE) -#define PAGE_SHARED_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_WRITE) +/* shared+writable pages are clean by default, hence PTE_RDONLY|PTE_WRITE */ +#define PAGE_SHARED __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_RDONLY | PTE_NG | PTE_PXN | PTE_UXN | PTE_WRITE) +#define PAGE_SHARED_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_RDONLY | PTE_NG | PTE_PXN | PTE_WRITE) #define PAGE_READONLY __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_RDONLY | PTE_NG | PTE_PXN | PTE_UXN) #define PAGE_READONLY_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_RDONLY | PTE_NG | PTE_PXN) #define PAGE_EXECONLY __pgprot(_PAGE_DEFAULT | PTE_RDONLY | PTE_NG | PTE_PXN) diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index 7576df00eb50..5d15b4735a0e 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -17,7 +17,7 @@ * VMALLOC range. * * VMALLOC_START: beginning of the kernel vmalloc space - * VMALLOC_END: extends to the available space below vmmemmap, PCI I/O space + * VMALLOC_END: extends to the available space below vmemmap, PCI I/O space * and fixed mappings */ #define VMALLOC_START (MODULES_END) @@ -283,23 +283,6 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, set_pte(ptep, pte); } -#define __HAVE_ARCH_PTE_SAME -static inline int pte_same(pte_t pte_a, pte_t pte_b) -{ - pteval_t lhs, rhs; - - lhs = pte_val(pte_a); - rhs = pte_val(pte_b); - - if (pte_present(pte_a)) - lhs &= ~PTE_RDONLY; - - if (pte_present(pte_b)) - rhs &= ~PTE_RDONLY; - - return (lhs == rhs); -} - /* * Huge pte definitions. */ @@ -876,15 +859,26 @@ static inline void update_mmu_cache(struct vm_area_struct *vma, #define update_mmu_cache_pmd(vma, address, pmd) do { } while (0) -#define kc_vaddr_to_offset(v) ((v) & ~PAGE_END) -#define kc_offset_to_vaddr(o) ((o) | PAGE_END) - #ifdef CONFIG_ARM64_PA_BITS_52 #define phys_to_ttbr(addr) (((addr) | ((addr) >> 46)) & TTBR_BADDR_MASK_52) #else #define phys_to_ttbr(addr) (addr) #endif +/* + * On arm64 without hardware Access Flag, copying from user will fail because + * the pte is old and cannot be marked young. So we always end up with zeroed + * page after fork() + CoW for pfn mappings. We don't always have a + * hardware-managed access flag on arm64. + */ +static inline bool arch_faults_on_old_pte(void) +{ + WARN_ON(preemptible()); + + return !cpu_has_hw_af(); +} +#define arch_faults_on_old_pte arch_faults_on_old_pte + #endif /* !__ASSEMBLY__ */ #endif /* __ASM_PGTABLE_H */ diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h index 5623685c7d13..5ba63204d078 100644 --- a/arch/arm64/include/asm/processor.h +++ b/arch/arm64/include/asm/processor.h @@ -9,7 +9,7 @@ #define __ASM_PROCESSOR_H #define KERNEL_DS UL(-1) -#define USER_DS ((UL(1) << MAX_USER_VA_BITS) - 1) +#define USER_DS ((UL(1) << VA_BITS) - 1) /* * On arm64 systems, unaligned accesses by the CPU are cheap, and so there is @@ -26,10 +26,12 @@ #include <linux/init.h> #include <linux/stddef.h> #include <linux/string.h> +#include <linux/thread_info.h> #include <asm/alternative.h> #include <asm/cpufeature.h> #include <asm/hw_breakpoint.h> +#include <asm/kasan.h> #include <asm/lse.h> #include <asm/pgtable-hwdef.h> #include <asm/pointer_auth.h> @@ -214,6 +216,18 @@ static inline void start_thread(struct pt_regs *regs, unsigned long pc, regs->sp = sp; } +static inline bool is_ttbr0_addr(unsigned long addr) +{ + /* entry assembly clears tags for TTBR0 addrs */ + return addr < TASK_SIZE; +} + +static inline bool is_ttbr1_addr(unsigned long addr) +{ + /* TTBR1 addresses may have a tag if KASAN_SW_TAGS is in use */ + return arch_kasan_reset_tag(addr) >= PAGE_OFFSET; +} + #ifdef CONFIG_COMPAT static inline void compat_start_thread(struct pt_regs *regs, unsigned long pc, unsigned long sp) diff --git a/arch/arm64/include/asm/pvclock-abi.h b/arch/arm64/include/asm/pvclock-abi.h new file mode 100644 index 000000000000..c4f1c0a0789c --- /dev/null +++ b/arch/arm64/include/asm/pvclock-abi.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (C) 2019 Arm Ltd. */ + +#ifndef __ASM_PVCLOCK_ABI_H +#define __ASM_PVCLOCK_ABI_H + +/* The below structure is defined in ARM DEN0057A */ + +struct pvclock_vcpu_stolen_time { + __le32 revision; + __le32 attributes; + __le64 stolen_time; + /* Structure must be 64 byte aligned, pad to that size */ + u8 padding[48]; +} __packed; + +#endif diff --git a/arch/arm64/include/asm/syscall_wrapper.h b/arch/arm64/include/asm/syscall_wrapper.h index 06d880b3526c..b383b4802a7b 100644 --- a/arch/arm64/include/asm/syscall_wrapper.h +++ b/arch/arm64/include/asm/syscall_wrapper.h @@ -66,24 +66,18 @@ struct pt_regs; } \ static inline long __do_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)) -#ifndef SYSCALL_DEFINE0 #define SYSCALL_DEFINE0(sname) \ SYSCALL_METADATA(_##sname, 0); \ asmlinkage long __arm64_sys_##sname(const struct pt_regs *__unused); \ ALLOW_ERROR_INJECTION(__arm64_sys_##sname, ERRNO); \ asmlinkage long __arm64_sys_##sname(const struct pt_regs *__unused) -#endif -#ifndef COND_SYSCALL #define COND_SYSCALL(name) \ asmlinkage long __weak __arm64_sys_##name(const struct pt_regs *regs) \ { \ return sys_ni_syscall(); \ } -#endif -#ifndef SYS_NI #define SYS_NI(name) SYSCALL_ALIAS(__arm64_sys_##name, sys_ni_posix_timers); -#endif #endif /* __ASM_SYSCALL_WRAPPER_H */ diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h index 972d196c7714..6e919fafb43d 100644 --- a/arch/arm64/include/asm/sysreg.h +++ b/arch/arm64/include/asm/sysreg.h @@ -212,7 +212,7 @@ #define SYS_FAR_EL1 sys_reg(3, 0, 6, 0, 0) #define SYS_PAR_EL1 sys_reg(3, 0, 7, 4, 0) -#define SYS_PAR_EL1_F BIT(1) +#define SYS_PAR_EL1_F BIT(0) #define SYS_PAR_EL1_FST GENMASK(6, 1) /*** Statistical Profiling Extension ***/ diff --git a/arch/arm64/include/asm/traps.h b/arch/arm64/include/asm/traps.h index 59690613ac31..cee5928e1b7d 100644 --- a/arch/arm64/include/asm/traps.h +++ b/arch/arm64/include/asm/traps.h @@ -42,16 +42,6 @@ static inline int __in_irqentry_text(unsigned long ptr) ptr < (unsigned long)&__irqentry_text_end; } -static inline int in_exception_text(unsigned long ptr) -{ - int in; - - in = ptr >= (unsigned long)&__exception_text_start && - ptr < (unsigned long)&__exception_text_end; - - return in ? : __in_irqentry_text(ptr); -} - static inline int in_entry_text(unsigned long ptr) { return ptr >= (unsigned long)&__entry_text_start && diff --git a/arch/arm64/include/asm/uaccess.h b/arch/arm64/include/asm/uaccess.h index 097d6bfac0b7..127712b0b970 100644 --- a/arch/arm64/include/asm/uaccess.h +++ b/arch/arm64/include/asm/uaccess.h @@ -378,20 +378,34 @@ do { \ extern unsigned long __must_check __arch_copy_from_user(void *to, const void __user *from, unsigned long n); #define raw_copy_from_user(to, from, n) \ ({ \ - __arch_copy_from_user((to), __uaccess_mask_ptr(from), (n)); \ + unsigned long __acfu_ret; \ + uaccess_enable_not_uao(); \ + __acfu_ret = __arch_copy_from_user((to), \ + __uaccess_mask_ptr(from), (n)); \ + uaccess_disable_not_uao(); \ + __acfu_ret; \ }) extern unsigned long __must_check __arch_copy_to_user(void __user *to, const void *from, unsigned long n); #define raw_copy_to_user(to, from, n) \ ({ \ - __arch_copy_to_user(__uaccess_mask_ptr(to), (from), (n)); \ + unsigned long __actu_ret; \ + uaccess_enable_not_uao(); \ + __actu_ret = __arch_copy_to_user(__uaccess_mask_ptr(to), \ + (from), (n)); \ + uaccess_disable_not_uao(); \ + __actu_ret; \ }) extern unsigned long __must_check __arch_copy_in_user(void __user *to, const void __user *from, unsigned long n); #define raw_copy_in_user(to, from, n) \ ({ \ - __arch_copy_in_user(__uaccess_mask_ptr(to), \ - __uaccess_mask_ptr(from), (n)); \ + unsigned long __aciu_ret; \ + uaccess_enable_not_uao(); \ + __aciu_ret = __arch_copy_in_user(__uaccess_mask_ptr(to), \ + __uaccess_mask_ptr(from), (n)); \ + uaccess_disable_not_uao(); \ + __aciu_ret; \ }) #define INLINE_COPY_TO_USER @@ -400,8 +414,11 @@ extern unsigned long __must_check __arch_copy_in_user(void __user *to, const voi extern unsigned long __must_check __arch_clear_user(void __user *to, unsigned long n); static inline unsigned long __must_check __clear_user(void __user *to, unsigned long n) { - if (access_ok(to, n)) + if (access_ok(to, n)) { + uaccess_enable_not_uao(); n = __arch_clear_user(__uaccess_mask_ptr(to), n); + uaccess_disable_not_uao(); + } return n; } #define clear_user __clear_user diff --git a/arch/arm64/include/asm/vdso/vsyscall.h b/arch/arm64/include/asm/vdso/vsyscall.h index 0c731bfc7c8c..0c20a7c1bee5 100644 --- a/arch/arm64/include/asm/vdso/vsyscall.h +++ b/arch/arm64/include/asm/vdso/vsyscall.h @@ -31,13 +31,6 @@ int __arm64_get_clock_mode(struct timekeeper *tk) #define __arch_get_clock_mode __arm64_get_clock_mode static __always_inline -int __arm64_use_vsyscall(struct vdso_data *vdata) -{ - return !vdata[CS_HRES_COARSE].clock_mode; -} -#define __arch_use_vsyscall __arm64_use_vsyscall - -static __always_inline void __arm64_update_vsyscall(struct vdso_data *vdata, struct timekeeper *tk) { vdata[CS_HRES_COARSE].mask = VDSO_PRECISION_MASK; diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h index 67c21f9bdbad..820e5751ada7 100644 --- a/arch/arm64/include/uapi/asm/kvm.h +++ b/arch/arm64/include/uapi/asm/kvm.h @@ -164,8 +164,9 @@ struct kvm_vcpu_events { struct { __u8 serror_pending; __u8 serror_has_esr; + __u8 ext_dabt_pending; /* Align it to 8 bytes */ - __u8 pad[6]; + __u8 pad[5]; __u64 serror_esr; } exception; __u32 reserved[12]; @@ -323,6 +324,8 @@ struct kvm_vcpu_events { #define KVM_ARM_VCPU_TIMER_CTRL 1 #define KVM_ARM_VCPU_TIMER_IRQ_VTIMER 0 #define KVM_ARM_VCPU_TIMER_IRQ_PTIMER 1 +#define KVM_ARM_VCPU_PVTIME_CTRL 2 +#define KVM_ARM_VCPU_PVTIME_IPA 0 /* KVM_IRQ_LINE irq field index values */ #define KVM_ARM_IRQ_VCPU2_SHIFT 28 diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile index 478491f07b4f..fc6488660f64 100644 --- a/arch/arm64/kernel/Makefile +++ b/arch/arm64/kernel/Makefile @@ -13,9 +13,9 @@ CFLAGS_REMOVE_return_address.o = $(CC_FLAGS_FTRACE) # Object file lists. obj-y := debug-monitors.o entry.o irq.o fpsimd.o \ - entry-fpsimd.o process.o ptrace.o setup.o signal.o \ - sys.o stacktrace.o time.o traps.o io.o vdso.o \ - hyp-stub.o psci.o cpu_ops.o insn.o \ + entry-common.o entry-fpsimd.o process.o ptrace.o \ + setup.o signal.o sys.o stacktrace.o time.o traps.o \ + io.o vdso.o hyp-stub.o psci.o cpu_ops.o insn.o \ return_address.o cpuinfo.o cpu_errata.o \ cpufeature.o alternative.o cacheinfo.o \ smp.o smp_spin_table.o topology.o smccc-call.o \ diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c index 214685760e1c..a5bdce8af65b 100644 --- a/arch/arm64/kernel/asm-offsets.c +++ b/arch/arm64/kernel/asm-offsets.c @@ -56,6 +56,7 @@ int main(void) DEFINE(S_X24, offsetof(struct pt_regs, regs[24])); DEFINE(S_X26, offsetof(struct pt_regs, regs[26])); DEFINE(S_X28, offsetof(struct pt_regs, regs[28])); + DEFINE(S_FP, offsetof(struct pt_regs, regs[29])); DEFINE(S_LR, offsetof(struct pt_regs, regs[30])); DEFINE(S_SP, offsetof(struct pt_regs, sp)); DEFINE(S_PSTATE, offsetof(struct pt_regs, pstate)); diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c index f593f4cffc0d..6a09ca7644ea 100644 --- a/arch/arm64/kernel/cpu_errata.c +++ b/arch/arm64/kernel/cpu_errata.c @@ -6,12 +6,12 @@ */ #include <linux/arm-smccc.h> -#include <linux/psci.h> #include <linux/types.h> #include <linux/cpu.h> #include <asm/cpu.h> #include <asm/cputype.h> #include <asm/cpufeature.h> +#include <asm/smp_plat.h> static bool __maybe_unused is_affected_midr_range(const struct arm64_cpu_capabilities *entry, int scope) @@ -87,13 +87,21 @@ has_mismatched_cache_type(const struct arm64_cpu_capabilities *entry, } static void -cpu_enable_trap_ctr_access(const struct arm64_cpu_capabilities *__unused) +cpu_enable_trap_ctr_access(const struct arm64_cpu_capabilities *cap) { u64 mask = arm64_ftr_reg_ctrel0.strict_mask; + bool enable_uct_trap = false; /* Trap CTR_EL0 access on this CPU, only if it has a mismatch */ if ((read_cpuid_cachetype() & mask) != (arm64_ftr_reg_ctrel0.sys_val & mask)) + enable_uct_trap = true; + + /* ... or if the system is affected by an erratum */ + if (cap->capability == ARM64_WORKAROUND_1542419) + enable_uct_trap = true; + + if (enable_uct_trap) sysreg_clear_set(sctlr_el1, SCTLR_EL1_UCT, 0); } @@ -166,9 +174,7 @@ static void install_bp_hardening_cb(bp_hardening_cb_t fn, } #endif /* CONFIG_KVM_INDIRECT_VECTORS */ -#include <uapi/linux/psci.h> #include <linux/arm-smccc.h> -#include <linux/psci.h> static void call_smc_arch_workaround_1(void) { @@ -212,43 +218,31 @@ static int detect_harden_bp_fw(void) struct arm_smccc_res res; u32 midr = read_cpuid_id(); - if (psci_ops.smccc_version == SMCCC_VERSION_1_0) + arm_smccc_1_1_invoke(ARM_SMCCC_ARCH_FEATURES_FUNC_ID, + ARM_SMCCC_ARCH_WORKAROUND_1, &res); + + switch ((int)res.a0) { + case 1: + /* Firmware says we're just fine */ + return 0; + case 0: + break; + default: return -1; + } - switch (psci_ops.conduit) { - case PSCI_CONDUIT_HVC: - arm_smccc_1_1_hvc(ARM_SMCCC_ARCH_FEATURES_FUNC_ID, - ARM_SMCCC_ARCH_WORKAROUND_1, &res); - switch ((int)res.a0) { - case 1: - /* Firmware says we're just fine */ - return 0; - case 0: - cb = call_hvc_arch_workaround_1; - /* This is a guest, no need to patch KVM vectors */ - smccc_start = NULL; - smccc_end = NULL; - break; - default: - return -1; - } + switch (arm_smccc_1_1_get_conduit()) { + case SMCCC_CONDUIT_HVC: + cb = call_hvc_arch_workaround_1; + /* This is a guest, no need to patch KVM vectors */ + smccc_start = NULL; + smccc_end = NULL; break; - case PSCI_CONDUIT_SMC: - arm_smccc_1_1_smc(ARM_SMCCC_ARCH_FEATURES_FUNC_ID, - ARM_SMCCC_ARCH_WORKAROUND_1, &res); - switch ((int)res.a0) { - case 1: - /* Firmware says we're just fine */ - return 0; - case 0: - cb = call_smc_arch_workaround_1; - smccc_start = __smccc_workaround_1_smc_start; - smccc_end = __smccc_workaround_1_smc_end; - break; - default: - return -1; - } + case SMCCC_CONDUIT_SMC: + cb = call_smc_arch_workaround_1; + smccc_start = __smccc_workaround_1_smc_start; + smccc_end = __smccc_workaround_1_smc_end; break; default: @@ -308,11 +302,11 @@ void __init arm64_update_smccc_conduit(struct alt_instr *alt, BUG_ON(nr_inst != 1); - switch (psci_ops.conduit) { - case PSCI_CONDUIT_HVC: + switch (arm_smccc_1_1_get_conduit()) { + case SMCCC_CONDUIT_HVC: insn = aarch64_insn_get_hvc_value(); break; - case PSCI_CONDUIT_SMC: + case SMCCC_CONDUIT_SMC: insn = aarch64_insn_get_smc_value(); break; default: @@ -338,6 +332,8 @@ void __init arm64_enable_wa2_handling(struct alt_instr *alt, void arm64_set_ssbd_mitigation(bool state) { + int conduit; + if (!IS_ENABLED(CONFIG_ARM64_SSBD)) { pr_info_once("SSBD disabled by kernel configuration\n"); return; @@ -351,19 +347,10 @@ void arm64_set_ssbd_mitigation(bool state) return; } - switch (psci_ops.conduit) { - case PSCI_CONDUIT_HVC: - arm_smccc_1_1_hvc(ARM_SMCCC_ARCH_WORKAROUND_2, state, NULL); - break; + conduit = arm_smccc_1_1_invoke(ARM_SMCCC_ARCH_WORKAROUND_2, state, + NULL); - case PSCI_CONDUIT_SMC: - arm_smccc_1_1_smc(ARM_SMCCC_ARCH_WORKAROUND_2, state, NULL); - break; - - default: - WARN_ON_ONCE(1); - break; - } + WARN_ON_ONCE(conduit == SMCCC_CONDUIT_NONE); } static bool has_ssbd_mitigation(const struct arm64_cpu_capabilities *entry, @@ -373,6 +360,7 @@ static bool has_ssbd_mitigation(const struct arm64_cpu_capabilities *entry, bool required = true; s32 val; bool this_cpu_safe = false; + int conduit; WARN_ON(scope != SCOPE_LOCAL_CPU || preemptible()); @@ -390,25 +378,10 @@ static bool has_ssbd_mitigation(const struct arm64_cpu_capabilities *entry, goto out_printmsg; } - if (psci_ops.smccc_version == SMCCC_VERSION_1_0) { - ssbd_state = ARM64_SSBD_UNKNOWN; - if (!this_cpu_safe) - __ssb_safe = false; - return false; - } - - switch (psci_ops.conduit) { - case PSCI_CONDUIT_HVC: - arm_smccc_1_1_hvc(ARM_SMCCC_ARCH_FEATURES_FUNC_ID, - ARM_SMCCC_ARCH_WORKAROUND_2, &res); - break; - - case PSCI_CONDUIT_SMC: - arm_smccc_1_1_smc(ARM_SMCCC_ARCH_FEATURES_FUNC_ID, - ARM_SMCCC_ARCH_WORKAROUND_2, &res); - break; + conduit = arm_smccc_1_1_invoke(ARM_SMCCC_ARCH_FEATURES_FUNC_ID, + ARM_SMCCC_ARCH_WORKAROUND_2, &res); - default: + if (conduit == SMCCC_CONDUIT_NONE) { ssbd_state = ARM64_SSBD_UNKNOWN; if (!this_cpu_safe) __ssb_safe = false; @@ -488,6 +461,7 @@ static const struct midr_range arm64_ssb_cpus[] = { MIDR_ALL_VERSIONS(MIDR_CORTEX_A35), MIDR_ALL_VERSIONS(MIDR_CORTEX_A53), MIDR_ALL_VERSIONS(MIDR_CORTEX_A55), + MIDR_ALL_VERSIONS(MIDR_BRAHMA_B53), {}, }; @@ -572,6 +546,7 @@ static const struct midr_range spectre_v2_safe_list[] = { MIDR_ALL_VERSIONS(MIDR_CORTEX_A35), MIDR_ALL_VERSIONS(MIDR_CORTEX_A53), MIDR_ALL_VERSIONS(MIDR_CORTEX_A55), + MIDR_ALL_VERSIONS(MIDR_BRAHMA_B53), { /* sentinel */ } }; @@ -623,9 +598,45 @@ check_branch_predictor(const struct arm64_cpu_capabilities *entry, int scope) return (need_wa > 0); } -#ifdef CONFIG_HARDEN_EL2_VECTORS +static const __maybe_unused struct midr_range tx2_family_cpus[] = { + MIDR_ALL_VERSIONS(MIDR_BRCM_VULCAN), + MIDR_ALL_VERSIONS(MIDR_CAVIUM_THUNDERX2), + {}, +}; -static const struct midr_range arm64_harden_el2_vectors[] = { +static bool __maybe_unused +needs_tx2_tvm_workaround(const struct arm64_cpu_capabilities *entry, + int scope) +{ + int i; + + if (!is_affected_midr_range_list(entry, scope) || + !is_hyp_mode_available()) + return false; + + for_each_possible_cpu(i) { + if (MPIDR_AFFINITY_LEVEL(cpu_logical_map(i), 0) != 0) + return true; + } + + return false; +} + +static bool __maybe_unused +has_neoverse_n1_erratum_1542419(const struct arm64_cpu_capabilities *entry, + int scope) +{ + u32 midr = read_cpuid_id(); + bool has_dic = read_cpuid_cachetype() & BIT(CTR_DIC_SHIFT); + const struct midr_range range = MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N1); + + WARN_ON(scope != SCOPE_LOCAL_CPU || preemptible()); + return is_midr_in_range(midr, &range) && has_dic; +} + +#if defined(CONFIG_HARDEN_EL2_VECTORS) || defined(CONFIG_ARM64_ERRATUM_1319367) + +static const struct midr_range ca57_a72[] = { MIDR_ALL_VERSIONS(MIDR_CORTEX_A57), MIDR_ALL_VERSIONS(MIDR_CORTEX_A72), {}, @@ -634,17 +645,23 @@ static const struct midr_range arm64_harden_el2_vectors[] = { #endif #ifdef CONFIG_ARM64_WORKAROUND_REPEAT_TLBI - -static const struct midr_range arm64_repeat_tlbi_cpus[] = { +static const struct arm64_cpu_capabilities arm64_repeat_tlbi_list[] = { #ifdef CONFIG_QCOM_FALKOR_ERRATUM_1009 - MIDR_RANGE(MIDR_QCOM_FALKOR_V1, 0, 0, 0, 0), + { + ERRATA_MIDR_REV(MIDR_QCOM_FALKOR_V1, 0, 0) + }, + { + .midr_range.model = MIDR_QCOM_KRYO, + .matches = is_kryo_midr, + }, #endif #ifdef CONFIG_ARM64_ERRATUM_1286807 - MIDR_RANGE(MIDR_CORTEX_A76, 0, 0, 3, 0), + { + ERRATA_MIDR_RANGE(MIDR_CORTEX_A76, 0, 0, 3, 0), + }, #endif {}, }; - #endif #ifdef CONFIG_CAVIUM_ERRATUM_27456 @@ -712,6 +729,33 @@ static const struct midr_range erratum_1418040_list[] = { }; #endif +#ifdef CONFIG_ARM64_ERRATUM_845719 +static const struct midr_range erratum_845719_list[] = { + /* Cortex-A53 r0p[01234] */ + MIDR_REV_RANGE(MIDR_CORTEX_A53, 0, 0, 4), + /* Brahma-B53 r0p[0] */ + MIDR_REV(MIDR_BRAHMA_B53, 0, 0), + {}, +}; +#endif + +#ifdef CONFIG_ARM64_ERRATUM_843419 +static const struct arm64_cpu_capabilities erratum_843419_list[] = { + { + /* Cortex-A53 r0p[01234] */ + .matches = is_affected_midr_range, + ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A53, 0, 0, 4), + MIDR_FIXED(0x4, BIT(8)), + }, + { + /* Brahma-B53 r0p[0] */ + .matches = is_affected_midr_range, + ERRATA_MIDR_REV(MIDR_BRAHMA_B53, 0, 0), + }, + {}, +}; +#endif + const struct arm64_cpu_capabilities arm64_errata[] = { #ifdef CONFIG_ARM64_WORKAROUND_CLEAN_CACHE { @@ -743,19 +787,18 @@ const struct arm64_cpu_capabilities arm64_errata[] = { #endif #ifdef CONFIG_ARM64_ERRATUM_843419 { - /* Cortex-A53 r0p[01234] */ .desc = "ARM erratum 843419", .capability = ARM64_WORKAROUND_843419, - ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A53, 0, 0, 4), - MIDR_FIXED(0x4, BIT(8)), + .type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM, + .matches = cpucap_multi_entry_cap_matches, + .match_list = erratum_843419_list, }, #endif #ifdef CONFIG_ARM64_ERRATUM_845719 { - /* Cortex-A53 r0p[01234] */ .desc = "ARM erratum 845719", .capability = ARM64_WORKAROUND_845719, - ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A53, 0, 0, 4), + ERRATA_MIDR_RANGE_LIST(erratum_845719_list), }, #endif #ifdef CONFIG_CAVIUM_ERRATUM_23154 @@ -791,6 +834,7 @@ const struct arm64_cpu_capabilities arm64_errata[] = { { .desc = "Qualcomm Technologies Falkor/Kryo erratum 1003", .capability = ARM64_WORKAROUND_QCOM_FALKOR_E1003, + .type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM, .matches = cpucap_multi_entry_cap_matches, .match_list = qcom_erratum_1003_list, }, @@ -799,7 +843,9 @@ const struct arm64_cpu_capabilities arm64_errata[] = { { .desc = "Qualcomm erratum 1009, ARM erratum 1286807", .capability = ARM64_WORKAROUND_REPEAT_TLBI, - ERRATA_MIDR_RANGE_LIST(arm64_repeat_tlbi_cpus), + .type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM, + .matches = cpucap_multi_entry_cap_matches, + .match_list = arm64_repeat_tlbi_list, }, #endif #ifdef CONFIG_ARM64_ERRATUM_858921 @@ -819,7 +865,7 @@ const struct arm64_cpu_capabilities arm64_errata[] = { { .desc = "EL2 vector hardening", .capability = ARM64_HARDEN_EL2_VECTORS, - ERRATA_MIDR_RANGE_LIST(arm64_harden_el2_vectors), + ERRATA_MIDR_RANGE_LIST(ca57_a72), }, #endif { @@ -852,6 +898,36 @@ const struct arm64_cpu_capabilities arm64_errata[] = { .matches = has_cortex_a76_erratum_1463225, }, #endif +#ifdef CONFIG_CAVIUM_TX2_ERRATUM_219 + { + .desc = "Cavium ThunderX2 erratum 219 (KVM guest sysreg trapping)", + .capability = ARM64_WORKAROUND_CAVIUM_TX2_219_TVM, + ERRATA_MIDR_RANGE_LIST(tx2_family_cpus), + .matches = needs_tx2_tvm_workaround, + }, + { + .desc = "Cavium ThunderX2 erratum 219 (PRFM removal)", + .capability = ARM64_WORKAROUND_CAVIUM_TX2_219_PRFM, + ERRATA_MIDR_RANGE_LIST(tx2_family_cpus), + }, +#endif +#ifdef CONFIG_ARM64_ERRATUM_1542419 + { + /* we depend on the firmware portion for correctness */ + .desc = "ARM erratum 1542419 (kernel portion)", + .capability = ARM64_WORKAROUND_1542419, + .type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM, + .matches = has_neoverse_n1_erratum_1542419, + .cpu_enable = cpu_enable_trap_ctr_access, + }, +#endif +#ifdef CONFIG_ARM64_ERRATUM_1319367 + { + .desc = "ARM erratum 1319367", + .capability = ARM64_WORKAROUND_1319367, + ERRATA_MIDR_RANGE_LIST(ca57_a72), + }, +#endif { } }; diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index cabebf1a7976..04cf64e9f0c9 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -176,11 +176,16 @@ static const struct arm64_ftr_bits ftr_id_aa64pfr1[] = { }; static const struct arm64_ftr_bits ftr_id_aa64zfr0[] = { - ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_SM4_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_SHA3_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_BITPERM_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_AES_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_SVEVER_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE), + FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_SM4_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE), + FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_SHA3_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE), + FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_BITPERM_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE), + FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_AES_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE), + FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_SVEVER_SHIFT, 4, 0), ARM64_FTR_END, }; @@ -977,6 +982,7 @@ static bool unmap_kernel_at_el0(const struct arm64_cpu_capabilities *entry, MIDR_ALL_VERSIONS(MIDR_CORTEX_A72), MIDR_ALL_VERSIONS(MIDR_CORTEX_A73), MIDR_ALL_VERSIONS(MIDR_HISI_TSV110), + MIDR_ALL_VERSIONS(MIDR_NVIDIA_CARMEL), { /* sentinel */ } }; char const *str = "kpti command line option"; diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c index 05933c065732..56bba746da1c 100644 --- a/arch/arm64/kernel/cpuinfo.c +++ b/arch/arm64/kernel/cpuinfo.c @@ -329,7 +329,7 @@ static void __cpuinfo_store_cpu(struct cpuinfo_arm64 *info) info->reg_cntfrq = arch_timer_get_cntfrq(); /* * Use the effective value of the CTR_EL0 than the raw value - * exposed by the CPU. CTR_E0.IDC field value must be interpreted + * exposed by the CPU. CTR_EL0.IDC field value must be interpreted * with the CLIDR_EL1 fields to avoid triggering false warnings * when there is a mismatch across the CPUs. Keep track of the * effective value of the CTR_EL0 in our internal records for diff --git a/arch/arm64/kernel/entry-common.c b/arch/arm64/kernel/entry-common.c new file mode 100644 index 000000000000..5dce5e56995a --- /dev/null +++ b/arch/arm64/kernel/entry-common.c @@ -0,0 +1,332 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Exception handling code + * + * Copyright (C) 2019 ARM Ltd. + */ + +#include <linux/context_tracking.h> +#include <linux/ptrace.h> +#include <linux/thread_info.h> + +#include <asm/cpufeature.h> +#include <asm/daifflags.h> +#include <asm/esr.h> +#include <asm/exception.h> +#include <asm/kprobes.h> +#include <asm/mmu.h> +#include <asm/sysreg.h> + +static void notrace el1_abort(struct pt_regs *regs, unsigned long esr) +{ + unsigned long far = read_sysreg(far_el1); + + local_daif_inherit(regs); + far = untagged_addr(far); + do_mem_abort(far, esr, regs); +} +NOKPROBE_SYMBOL(el1_abort); + +static void notrace el1_pc(struct pt_regs *regs, unsigned long esr) +{ + unsigned long far = read_sysreg(far_el1); + + local_daif_inherit(regs); + do_sp_pc_abort(far, esr, regs); +} +NOKPROBE_SYMBOL(el1_pc); + +static void el1_undef(struct pt_regs *regs) +{ + local_daif_inherit(regs); + do_undefinstr(regs); +} +NOKPROBE_SYMBOL(el1_undef); + +static void el1_inv(struct pt_regs *regs, unsigned long esr) +{ + local_daif_inherit(regs); + bad_mode(regs, 0, esr); +} +NOKPROBE_SYMBOL(el1_inv); + +static void notrace el1_dbg(struct pt_regs *regs, unsigned long esr) +{ + unsigned long far = read_sysreg(far_el1); + + /* + * The CPU masked interrupts, and we are leaving them masked during + * do_debug_exception(). Update PMR as if we had called + * local_mask_daif(). + */ + if (system_uses_irq_prio_masking()) + gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET); + + do_debug_exception(far, esr, regs); +} +NOKPROBE_SYMBOL(el1_dbg); + +asmlinkage void notrace el1_sync_handler(struct pt_regs *regs) +{ + unsigned long esr = read_sysreg(esr_el1); + + switch (ESR_ELx_EC(esr)) { + case ESR_ELx_EC_DABT_CUR: + case ESR_ELx_EC_IABT_CUR: + el1_abort(regs, esr); + break; + /* + * We don't handle ESR_ELx_EC_SP_ALIGN, since we will have hit a + * recursive exception when trying to push the initial pt_regs. + */ + case ESR_ELx_EC_PC_ALIGN: + el1_pc(regs, esr); + break; + case ESR_ELx_EC_SYS64: + case ESR_ELx_EC_UNKNOWN: + el1_undef(regs); + break; + case ESR_ELx_EC_BREAKPT_CUR: + case ESR_ELx_EC_SOFTSTP_CUR: + case ESR_ELx_EC_WATCHPT_CUR: + case ESR_ELx_EC_BRK64: + el1_dbg(regs, esr); + break; + default: + el1_inv(regs, esr); + }; +} +NOKPROBE_SYMBOL(el1_sync_handler); + +static void notrace el0_da(struct pt_regs *regs, unsigned long esr) +{ + unsigned long far = read_sysreg(far_el1); + + user_exit_irqoff(); + local_daif_restore(DAIF_PROCCTX); + far = untagged_addr(far); + do_mem_abort(far, esr, regs); +} +NOKPROBE_SYMBOL(el0_da); + +static void notrace el0_ia(struct pt_regs *regs, unsigned long esr) +{ + unsigned long far = read_sysreg(far_el1); + + /* + * We've taken an instruction abort from userspace and not yet + * re-enabled IRQs. If the address is a kernel address, apply + * BP hardening prior to enabling IRQs and pre-emption. + */ + if (!is_ttbr0_addr(far)) + arm64_apply_bp_hardening(); + + user_exit_irqoff(); + local_daif_restore(DAIF_PROCCTX); + do_mem_abort(far, esr, regs); +} +NOKPROBE_SYMBOL(el0_ia); + +static void notrace el0_fpsimd_acc(struct pt_regs *regs, unsigned long esr) +{ + user_exit_irqoff(); + local_daif_restore(DAIF_PROCCTX); + do_fpsimd_acc(esr, regs); +} +NOKPROBE_SYMBOL(el0_fpsimd_acc); + +static void notrace el0_sve_acc(struct pt_regs *regs, unsigned long esr) +{ + user_exit_irqoff(); + local_daif_restore(DAIF_PROCCTX); + do_sve_acc(esr, regs); +} +NOKPROBE_SYMBOL(el0_sve_acc); + +static void notrace el0_fpsimd_exc(struct pt_regs *regs, unsigned long esr) +{ + user_exit_irqoff(); + local_daif_restore(DAIF_PROCCTX); + do_fpsimd_exc(esr, regs); +} +NOKPROBE_SYMBOL(el0_fpsimd_exc); + +static void notrace el0_sys(struct pt_regs *regs, unsigned long esr) +{ + user_exit_irqoff(); + local_daif_restore(DAIF_PROCCTX); + do_sysinstr(esr, regs); +} +NOKPROBE_SYMBOL(el0_sys); + +static void notrace el0_pc(struct pt_regs *regs, unsigned long esr) +{ + unsigned long far = read_sysreg(far_el1); + + if (!is_ttbr0_addr(instruction_pointer(regs))) + arm64_apply_bp_hardening(); + + user_exit_irqoff(); + local_daif_restore(DAIF_PROCCTX); + do_sp_pc_abort(far, esr, regs); +} +NOKPROBE_SYMBOL(el0_pc); + +static void notrace el0_sp(struct pt_regs *regs, unsigned long esr) +{ + user_exit_irqoff(); + local_daif_restore(DAIF_PROCCTX_NOIRQ); + do_sp_pc_abort(regs->sp, esr, regs); +} +NOKPROBE_SYMBOL(el0_sp); + +static void notrace el0_undef(struct pt_regs *regs) +{ + user_exit_irqoff(); + local_daif_restore(DAIF_PROCCTX); + do_undefinstr(regs); +} +NOKPROBE_SYMBOL(el0_undef); + +static void notrace el0_inv(struct pt_regs *regs, unsigned long esr) +{ + user_exit_irqoff(); + local_daif_restore(DAIF_PROCCTX); + bad_el0_sync(regs, 0, esr); +} +NOKPROBE_SYMBOL(el0_inv); + +static void notrace el0_dbg(struct pt_regs *regs, unsigned long esr) +{ + /* Only watchpoints write FAR_EL1, otherwise its UNKNOWN */ + unsigned long far = read_sysreg(far_el1); + + if (system_uses_irq_prio_masking()) + gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET); + + user_exit_irqoff(); + do_debug_exception(far, esr, regs); + local_daif_restore(DAIF_PROCCTX_NOIRQ); +} +NOKPROBE_SYMBOL(el0_dbg); + +static void notrace el0_svc(struct pt_regs *regs) +{ + if (system_uses_irq_prio_masking()) + gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET); + + el0_svc_handler(regs); +} +NOKPROBE_SYMBOL(el0_svc); + +asmlinkage void notrace el0_sync_handler(struct pt_regs *regs) +{ + unsigned long esr = read_sysreg(esr_el1); + + switch (ESR_ELx_EC(esr)) { + case ESR_ELx_EC_SVC64: + el0_svc(regs); + break; + case ESR_ELx_EC_DABT_LOW: + el0_da(regs, esr); + break; + case ESR_ELx_EC_IABT_LOW: + el0_ia(regs, esr); + break; + case ESR_ELx_EC_FP_ASIMD: + el0_fpsimd_acc(regs, esr); + break; + case ESR_ELx_EC_SVE: + el0_sve_acc(regs, esr); + break; + case ESR_ELx_EC_FP_EXC64: + el0_fpsimd_exc(regs, esr); + break; + case ESR_ELx_EC_SYS64: + case ESR_ELx_EC_WFx: + el0_sys(regs, esr); + break; + case ESR_ELx_EC_SP_ALIGN: + el0_sp(regs, esr); + break; + case ESR_ELx_EC_PC_ALIGN: + el0_pc(regs, esr); + break; + case ESR_ELx_EC_UNKNOWN: + el0_undef(regs); + break; + case ESR_ELx_EC_BREAKPT_LOW: + case ESR_ELx_EC_SOFTSTP_LOW: + case ESR_ELx_EC_WATCHPT_LOW: + case ESR_ELx_EC_BRK64: + el0_dbg(regs, esr); + break; + default: + el0_inv(regs, esr); + } +} +NOKPROBE_SYMBOL(el0_sync_handler); + +#ifdef CONFIG_COMPAT +static void notrace el0_cp15(struct pt_regs *regs, unsigned long esr) +{ + user_exit_irqoff(); + local_daif_restore(DAIF_PROCCTX); + do_cp15instr(esr, regs); +} +NOKPROBE_SYMBOL(el0_cp15); + +static void notrace el0_svc_compat(struct pt_regs *regs) +{ + if (system_uses_irq_prio_masking()) + gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET); + + el0_svc_compat_handler(regs); +} +NOKPROBE_SYMBOL(el0_svc_compat); + +asmlinkage void notrace el0_sync_compat_handler(struct pt_regs *regs) +{ + unsigned long esr = read_sysreg(esr_el1); + + switch (ESR_ELx_EC(esr)) { + case ESR_ELx_EC_SVC32: + el0_svc_compat(regs); + break; + case ESR_ELx_EC_DABT_LOW: + el0_da(regs, esr); + break; + case ESR_ELx_EC_IABT_LOW: + el0_ia(regs, esr); + break; + case ESR_ELx_EC_FP_ASIMD: + el0_fpsimd_acc(regs, esr); + break; + case ESR_ELx_EC_FP_EXC32: + el0_fpsimd_exc(regs, esr); + break; + case ESR_ELx_EC_PC_ALIGN: + el0_pc(regs, esr); + break; + case ESR_ELx_EC_UNKNOWN: + case ESR_ELx_EC_CP14_MR: + case ESR_ELx_EC_CP14_LS: + case ESR_ELx_EC_CP14_64: + el0_undef(regs); + break; + case ESR_ELx_EC_CP15_32: + case ESR_ELx_EC_CP15_64: + el0_cp15(regs, esr); + break; + case ESR_ELx_EC_BREAKPT_LOW: + case ESR_ELx_EC_SOFTSTP_LOW: + case ESR_ELx_EC_WATCHPT_LOW: + case ESR_ELx_EC_BKPT32: + el0_dbg(regs, esr); + break; + default: + el0_inv(regs, esr); + } +} +NOKPROBE_SYMBOL(el0_sync_compat_handler); +#endif /* CONFIG_COMPAT */ diff --git a/arch/arm64/kernel/entry-ftrace.S b/arch/arm64/kernel/entry-ftrace.S index 33d003d80121..4fe1514fcbfd 100644 --- a/arch/arm64/kernel/entry-ftrace.S +++ b/arch/arm64/kernel/entry-ftrace.S @@ -7,10 +7,137 @@ */ #include <linux/linkage.h> +#include <asm/asm-offsets.h> #include <asm/assembler.h> #include <asm/ftrace.h> #include <asm/insn.h> +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS +/* + * Due to -fpatchable-function-entry=2, the compiler has placed two NOPs before + * the regular function prologue. For an enabled callsite, ftrace_init_nop() and + * ftrace_make_call() have patched those NOPs to: + * + * MOV X9, LR + * BL <entry> + * + * ... where <entry> is either ftrace_caller or ftrace_regs_caller. + * + * Each instrumented function follows the AAPCS, so here x0-x8 and x19-x30 are + * live, and x9-x18 are safe to clobber. + * + * We save the callsite's context into a pt_regs before invoking any ftrace + * callbacks. So that we can get a sensible backtrace, we create a stack record + * for the callsite and the ftrace entry assembly. This is not sufficient for + * reliable stacktrace: until we create the callsite stack record, its caller + * is missing from the LR and existing chain of frame records. + */ + .macro ftrace_regs_entry, allregs=0 + /* Make room for pt_regs, plus a callee frame */ + sub sp, sp, #(S_FRAME_SIZE + 16) + + /* Save function arguments (and x9 for simplicity) */ + stp x0, x1, [sp, #S_X0] + stp x2, x3, [sp, #S_X2] + stp x4, x5, [sp, #S_X4] + stp x6, x7, [sp, #S_X6] + stp x8, x9, [sp, #S_X8] + + /* Optionally save the callee-saved registers, always save the FP */ + .if \allregs == 1 + stp x10, x11, [sp, #S_X10] + stp x12, x13, [sp, #S_X12] + stp x14, x15, [sp, #S_X14] + stp x16, x17, [sp, #S_X16] + stp x18, x19, [sp, #S_X18] + stp x20, x21, [sp, #S_X20] + stp x22, x23, [sp, #S_X22] + stp x24, x25, [sp, #S_X24] + stp x26, x27, [sp, #S_X26] + stp x28, x29, [sp, #S_X28] + .else + str x29, [sp, #S_FP] + .endif + + /* Save the callsite's SP and LR */ + add x10, sp, #(S_FRAME_SIZE + 16) + stp x9, x10, [sp, #S_LR] + + /* Save the PC after the ftrace callsite */ + str x30, [sp, #S_PC] + + /* Create a frame record for the callsite above pt_regs */ + stp x29, x9, [sp, #S_FRAME_SIZE] + add x29, sp, #S_FRAME_SIZE + + /* Create our frame record within pt_regs. */ + stp x29, x30, [sp, #S_STACKFRAME] + add x29, sp, #S_STACKFRAME + .endm + +ENTRY(ftrace_regs_caller) + ftrace_regs_entry 1 + b ftrace_common +ENDPROC(ftrace_regs_caller) + +ENTRY(ftrace_caller) + ftrace_regs_entry 0 + b ftrace_common +ENDPROC(ftrace_caller) + +ENTRY(ftrace_common) + sub x0, x30, #AARCH64_INSN_SIZE // ip (callsite's BL insn) + mov x1, x9 // parent_ip (callsite's LR) + ldr_l x2, function_trace_op // op + mov x3, sp // regs + +GLOBAL(ftrace_call) + bl ftrace_stub + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +GLOBAL(ftrace_graph_call) // ftrace_graph_caller(); + nop // If enabled, this will be replaced + // "b ftrace_graph_caller" +#endif + +/* + * At the callsite x0-x8 and x19-x30 were live. Any C code will have preserved + * x19-x29 per the AAPCS, and we created frame records upon entry, so we need + * to restore x0-x8, x29, and x30. + */ +ftrace_common_return: + /* Restore function arguments */ + ldp x0, x1, [sp] + ldp x2, x3, [sp, #S_X2] + ldp x4, x5, [sp, #S_X4] + ldp x6, x7, [sp, #S_X6] + ldr x8, [sp, #S_X8] + + /* Restore the callsite's FP, LR, PC */ + ldr x29, [sp, #S_FP] + ldr x30, [sp, #S_LR] + ldr x9, [sp, #S_PC] + + /* Restore the callsite's SP */ + add sp, sp, #S_FRAME_SIZE + 16 + + ret x9 +ENDPROC(ftrace_common) + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +ENTRY(ftrace_graph_caller) + ldr x0, [sp, #S_PC] + sub x0, x0, #AARCH64_INSN_SIZE // ip (callsite's BL insn) + add x1, sp, #S_LR // parent_ip (callsite's LR) + ldr x2, [sp, #S_FRAME_SIZE] // parent fp (callsite's FP) + bl prepare_ftrace_return + b ftrace_common_return +ENDPROC(ftrace_graph_caller) +#else +#endif + +#else /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */ + /* * Gcc with -pg will put the following code in the beginning of each function: * mov x0, x30 @@ -160,11 +287,6 @@ GLOBAL(ftrace_graph_call) // ftrace_graph_caller(); mcount_exit ENDPROC(ftrace_caller) -#endif /* CONFIG_DYNAMIC_FTRACE */ - -ENTRY(ftrace_stub) - ret -ENDPROC(ftrace_stub) #ifdef CONFIG_FUNCTION_GRAPH_TRACER /* @@ -184,7 +306,15 @@ ENTRY(ftrace_graph_caller) mcount_exit ENDPROC(ftrace_graph_caller) +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ +#endif /* CONFIG_DYNAMIC_FTRACE */ +#endif /* CONFIG_DYNAMIC_FTRACE_WITH_REGS */ + +ENTRY(ftrace_stub) + ret +ENDPROC(ftrace_stub) +#ifdef CONFIG_FUNCTION_GRAPH_TRACER /* * void return_to_handler(void) * diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index e304fe04b098..583f71abbe98 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -269,8 +269,10 @@ alternative_else_nop_endif alternative_if ARM64_HAS_IRQ_PRIO_MASKING ldr x20, [sp, #S_PMR_SAVE] msr_s SYS_ICC_PMR_EL1, x20 - /* Ensure priority change is seen by redistributor */ - dsb sy + mrs_s x21, SYS_ICC_CTLR_EL1 + tbz x21, #6, .L__skip_pmr_sync\@ // Check for ICC_CTLR_EL1.PMHE + dsb sy // Ensure priority change is seen by redistributor +.L__skip_pmr_sync\@: alternative_else_nop_endif ldp x21, x22, [sp, #S_PC] // load ELR, SPSR @@ -578,76 +580,9 @@ ENDPROC(el1_error_invalid) .align 6 el1_sync: kernel_entry 1 - mrs x1, esr_el1 // read the syndrome register - lsr x24, x1, #ESR_ELx_EC_SHIFT // exception class - cmp x24, #ESR_ELx_EC_DABT_CUR // data abort in EL1 - b.eq el1_da - cmp x24, #ESR_ELx_EC_IABT_CUR // instruction abort in EL1 - b.eq el1_ia - cmp x24, #ESR_ELx_EC_SYS64 // configurable trap - b.eq el1_undef - cmp x24, #ESR_ELx_EC_PC_ALIGN // pc alignment exception - b.eq el1_pc - cmp x24, #ESR_ELx_EC_UNKNOWN // unknown exception in EL1 - b.eq el1_undef - cmp x24, #ESR_ELx_EC_BREAKPT_CUR // debug exception in EL1 - b.ge el1_dbg - b el1_inv - -el1_ia: - /* - * Fall through to the Data abort case - */ -el1_da: - /* - * Data abort handling - */ - mrs x3, far_el1 - inherit_daif pstate=x23, tmp=x2 - clear_address_tag x0, x3 - mov x2, sp // struct pt_regs - bl do_mem_abort - - kernel_exit 1 -el1_pc: - /* - * PC alignment exception handling. We don't handle SP alignment faults, - * since we will have hit a recursive exception when trying to push the - * initial pt_regs. - */ - mrs x0, far_el1 - inherit_daif pstate=x23, tmp=x2 - mov x2, sp - bl do_sp_pc_abort - ASM_BUG() -el1_undef: - /* - * Undefined instruction - */ - inherit_daif pstate=x23, tmp=x2 mov x0, sp - bl do_undefinstr + bl el1_sync_handler kernel_exit 1 -el1_dbg: - /* - * Debug exception handling - */ - cmp x24, #ESR_ELx_EC_BRK64 // if BRK64 - cinc x24, x24, eq // set bit '0' - tbz x24, #0, el1_inv // EL1 only - gic_prio_kentry_setup tmp=x3 - mrs x0, far_el1 - mov x2, sp // struct pt_regs - bl do_debug_exception - kernel_exit 1 -el1_inv: - // TODO: add support for undefined instructions in kernel mode - inherit_daif pstate=x23, tmp=x2 - mov x0, sp - mov x2, x1 - mov x1, #BAD_SYNC - bl bad_mode - ASM_BUG() ENDPROC(el1_sync) .align 6 @@ -680,7 +615,7 @@ alternative_if ARM64_HAS_IRQ_PRIO_MASKING orr x24, x24, x0 alternative_else_nop_endif cbnz x24, 1f // preempt count != 0 || NMI return path - bl preempt_schedule_irq // irq en/disable is done inside + bl arm64_preempt_schedule_irq // irq en/disable is done inside 1: #endif @@ -714,71 +649,18 @@ ENDPROC(el1_irq) .align 6 el0_sync: kernel_entry 0 - mrs x25, esr_el1 // read the syndrome register - lsr x24, x25, #ESR_ELx_EC_SHIFT // exception class - cmp x24, #ESR_ELx_EC_SVC64 // SVC in 64-bit state - b.eq el0_svc - cmp x24, #ESR_ELx_EC_DABT_LOW // data abort in EL0 - b.eq el0_da - cmp x24, #ESR_ELx_EC_IABT_LOW // instruction abort in EL0 - b.eq el0_ia - cmp x24, #ESR_ELx_EC_FP_ASIMD // FP/ASIMD access - b.eq el0_fpsimd_acc - cmp x24, #ESR_ELx_EC_SVE // SVE access - b.eq el0_sve_acc - cmp x24, #ESR_ELx_EC_FP_EXC64 // FP/ASIMD exception - b.eq el0_fpsimd_exc - cmp x24, #ESR_ELx_EC_SYS64 // configurable trap - ccmp x24, #ESR_ELx_EC_WFx, #4, ne - b.eq el0_sys - cmp x24, #ESR_ELx_EC_SP_ALIGN // stack alignment exception - b.eq el0_sp - cmp x24, #ESR_ELx_EC_PC_ALIGN // pc alignment exception - b.eq el0_pc - cmp x24, #ESR_ELx_EC_UNKNOWN // unknown exception in EL0 - b.eq el0_undef - cmp x24, #ESR_ELx_EC_BREAKPT_LOW // debug exception in EL0 - b.ge el0_dbg - b el0_inv + mov x0, sp + bl el0_sync_handler + b ret_to_user #ifdef CONFIG_COMPAT .align 6 el0_sync_compat: kernel_entry 0, 32 - mrs x25, esr_el1 // read the syndrome register - lsr x24, x25, #ESR_ELx_EC_SHIFT // exception class - cmp x24, #ESR_ELx_EC_SVC32 // SVC in 32-bit state - b.eq el0_svc_compat - cmp x24, #ESR_ELx_EC_DABT_LOW // data abort in EL0 - b.eq el0_da - cmp x24, #ESR_ELx_EC_IABT_LOW // instruction abort in EL0 - b.eq el0_ia - cmp x24, #ESR_ELx_EC_FP_ASIMD // FP/ASIMD access - b.eq el0_fpsimd_acc - cmp x24, #ESR_ELx_EC_FP_EXC32 // FP/ASIMD exception - b.eq el0_fpsimd_exc - cmp x24, #ESR_ELx_EC_PC_ALIGN // pc alignment exception - b.eq el0_pc - cmp x24, #ESR_ELx_EC_UNKNOWN // unknown exception in EL0 - b.eq el0_undef - cmp x24, #ESR_ELx_EC_CP15_32 // CP15 MRC/MCR trap - b.eq el0_cp15 - cmp x24, #ESR_ELx_EC_CP15_64 // CP15 MRRC/MCRR trap - b.eq el0_cp15 - cmp x24, #ESR_ELx_EC_CP14_MR // CP14 MRC/MCR trap - b.eq el0_undef - cmp x24, #ESR_ELx_EC_CP14_LS // CP14 LDC/STC trap - b.eq el0_undef - cmp x24, #ESR_ELx_EC_CP14_64 // CP14 MRRC/MCRR trap - b.eq el0_undef - cmp x24, #ESR_ELx_EC_BREAKPT_LOW // debug exception in EL0 - b.ge el0_dbg - b el0_inv -el0_svc_compat: - gic_prio_kentry_setup tmp=x1 mov x0, sp - bl el0_svc_compat_handler + bl el0_sync_compat_handler b ret_to_user +ENDPROC(el0_sync) .align 6 el0_irq_compat: @@ -788,140 +670,8 @@ el0_irq_compat: el0_error_compat: kernel_entry 0, 32 b el0_error_naked - -el0_cp15: - /* - * Trapped CP15 (MRC, MCR, MRRC, MCRR) instructions - */ - ct_user_exit_irqoff - enable_daif - mov x0, x25 - mov x1, sp - bl do_cp15instr - b ret_to_user #endif -el0_da: - /* - * Data abort handling - */ - mrs x26, far_el1 - ct_user_exit_irqoff - enable_daif - clear_address_tag x0, x26 - mov x1, x25 - mov x2, sp - bl do_mem_abort - b ret_to_user -el0_ia: - /* - * Instruction abort handling - */ - mrs x26, far_el1 - gic_prio_kentry_setup tmp=x0 - ct_user_exit_irqoff - enable_da_f -#ifdef CONFIG_TRACE_IRQFLAGS - bl trace_hardirqs_off -#endif - mov x0, x26 - mov x1, x25 - mov x2, sp - bl do_el0_ia_bp_hardening - b ret_to_user -el0_fpsimd_acc: - /* - * Floating Point or Advanced SIMD access - */ - ct_user_exit_irqoff - enable_daif - mov x0, x25 - mov x1, sp - bl do_fpsimd_acc - b ret_to_user -el0_sve_acc: - /* - * Scalable Vector Extension access - */ - ct_user_exit_irqoff - enable_daif - mov x0, x25 - mov x1, sp - bl do_sve_acc - b ret_to_user -el0_fpsimd_exc: - /* - * Floating Point, Advanced SIMD or SVE exception - */ - ct_user_exit_irqoff - enable_daif - mov x0, x25 - mov x1, sp - bl do_fpsimd_exc - b ret_to_user -el0_sp: - ldr x26, [sp, #S_SP] - b el0_sp_pc -el0_pc: - mrs x26, far_el1 -el0_sp_pc: - /* - * Stack or PC alignment exception handling - */ - gic_prio_kentry_setup tmp=x0 - ct_user_exit_irqoff - enable_da_f -#ifdef CONFIG_TRACE_IRQFLAGS - bl trace_hardirqs_off -#endif - mov x0, x26 - mov x1, x25 - mov x2, sp - bl do_sp_pc_abort - b ret_to_user -el0_undef: - /* - * Undefined instruction - */ - ct_user_exit_irqoff - enable_daif - mov x0, sp - bl do_undefinstr - b ret_to_user -el0_sys: - /* - * System instructions, for trapped cache maintenance instructions - */ - ct_user_exit_irqoff - enable_daif - mov x0, x25 - mov x1, sp - bl do_sysinstr - b ret_to_user -el0_dbg: - /* - * Debug exception handling - */ - tbnz x24, #0, el0_inv // EL0 only - mrs x24, far_el1 - gic_prio_kentry_setup tmp=x3 - ct_user_exit_irqoff - mov x0, x24 - mov x1, x25 - mov x2, sp - bl do_debug_exception - enable_da_f - b ret_to_user -el0_inv: - ct_user_exit_irqoff - enable_daif - mov x0, sp - mov x1, #BAD_SYNC - mov x2, x25 - bl bad_el0_sync - b ret_to_user -ENDPROC(el0_sync) - .align 6 el0_irq: kernel_entry 0 @@ -999,17 +749,6 @@ finish_ret_to_user: kernel_exit 0 ENDPROC(ret_to_user) -/* - * SVC handler. - */ - .align 6 -el0_svc: - gic_prio_kentry_setup tmp=x1 - mov x0, sp - bl el0_svc_handler - b ret_to_user -ENDPROC(el0_svc) - .popsection // .entry.text #ifdef CONFIG_UNMAP_KERNEL_AT_EL0 @@ -1071,7 +810,9 @@ alternative_insn isb, nop, ARM64_WORKAROUND_QCOM_FALKOR_E1003 #else ldr x30, =vectors #endif +alternative_if_not ARM64_WORKAROUND_CAVIUM_TX2_219_PRFM prfm plil1strm, [x30, #(1b - tramp_vectors)] +alternative_else_nop_endif msr vbar_el1, x30 add x30, x30, #(1b - tramp_vectors) isb diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c index 37d3912cfe06..3eb338f14386 100644 --- a/arch/arm64/kernel/fpsimd.c +++ b/arch/arm64/kernel/fpsimd.c @@ -920,7 +920,7 @@ void fpsimd_release_task(struct task_struct *dead_task) * would have disabled the SVE access trap for userspace during * ret_to_user, making an SVE access trap impossible in that case. */ -asmlinkage void do_sve_acc(unsigned int esr, struct pt_regs *regs) +void do_sve_acc(unsigned int esr, struct pt_regs *regs) { /* Even if we chose not to use SVE, the hardware could still trap: */ if (unlikely(!system_supports_sve()) || WARN_ON(is_compat_task())) { @@ -947,7 +947,7 @@ asmlinkage void do_sve_acc(unsigned int esr, struct pt_regs *regs) /* * Trapped FP/ASIMD access. */ -asmlinkage void do_fpsimd_acc(unsigned int esr, struct pt_regs *regs) +void do_fpsimd_acc(unsigned int esr, struct pt_regs *regs) { /* TODO: implement lazy context saving/restoring */ WARN_ON(1); @@ -956,7 +956,7 @@ asmlinkage void do_fpsimd_acc(unsigned int esr, struct pt_regs *regs) /* * Raise a SIGFPE for the current process. */ -asmlinkage void do_fpsimd_exc(unsigned int esr, struct pt_regs *regs) +void do_fpsimd_exc(unsigned int esr, struct pt_regs *regs) { unsigned int si_code = FPE_FLTUNK; diff --git a/arch/arm64/kernel/ftrace.c b/arch/arm64/kernel/ftrace.c index 06e56b470315..8618faa82e6d 100644 --- a/arch/arm64/kernel/ftrace.c +++ b/arch/arm64/kernel/ftrace.c @@ -62,6 +62,19 @@ int ftrace_update_ftrace_func(ftrace_func_t func) return ftrace_modify_code(pc, 0, new, false); } +static struct plt_entry *get_ftrace_plt(struct module *mod, unsigned long addr) +{ +#ifdef CONFIG_ARM64_MODULE_PLTS + struct plt_entry *plt = mod->arch.ftrace_trampolines; + + if (addr == FTRACE_ADDR) + return &plt[FTRACE_PLT_IDX]; + if (addr == FTRACE_REGS_ADDR && IS_ENABLED(CONFIG_FTRACE_WITH_REGS)) + return &plt[FTRACE_REGS_PLT_IDX]; +#endif + return NULL; +} + /* * Turn on the call to ftrace_caller() in instrumented function */ @@ -72,9 +85,11 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) long offset = (long)pc - (long)addr; if (offset < -SZ_128M || offset >= SZ_128M) { -#ifdef CONFIG_ARM64_MODULE_PLTS - struct plt_entry trampoline, *dst; struct module *mod; + struct plt_entry *plt; + + if (!IS_ENABLED(CONFIG_ARM64_MODULE_PLTS)) + return -EINVAL; /* * On kernels that support module PLTs, the offset between the @@ -93,49 +108,13 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) if (WARN_ON(!mod)) return -EINVAL; - /* - * There is only one ftrace trampoline per module. For now, - * this is not a problem since on arm64, all dynamic ftrace - * invocations are routed via ftrace_caller(). This will need - * to be revisited if support for multiple ftrace entry points - * is added in the future, but for now, the pr_err() below - * deals with a theoretical issue only. - * - * Note that PLTs are place relative, and plt_entries_equal() - * checks whether they point to the same target. Here, we need - * to check if the actual opcodes are in fact identical, - * regardless of the offset in memory so use memcmp() instead. - */ - dst = mod->arch.ftrace_trampoline; - trampoline = get_plt_entry(addr, dst); - if (memcmp(dst, &trampoline, sizeof(trampoline))) { - if (plt_entry_is_initialized(dst)) { - pr_err("ftrace: far branches to multiple entry points unsupported inside a single module\n"); - return -EINVAL; - } - - /* point the trampoline to our ftrace entry point */ - module_disable_ro(mod); - *dst = trampoline; - module_enable_ro(mod, true); - - /* - * Ensure updated trampoline is visible to instruction - * fetch before we patch in the branch. Although the - * architecture doesn't require an IPI in this case, - * Neoverse-N1 erratum #1542419 does require one - * if the TLB maintenance in module_enable_ro() is - * skipped due to rodata_enabled. It doesn't seem worth - * it to make it conditional given that this is - * certainly not a fast-path. - */ - flush_icache_range((unsigned long)&dst[0], - (unsigned long)&dst[1]); + plt = get_ftrace_plt(mod, addr); + if (!plt) { + pr_err("ftrace: no module PLT for %ps\n", (void *)addr); + return -EINVAL; } - addr = (unsigned long)dst; -#else /* CONFIG_ARM64_MODULE_PLTS */ - return -EINVAL; -#endif /* CONFIG_ARM64_MODULE_PLTS */ + + addr = (unsigned long)plt; } old = aarch64_insn_gen_nop(); @@ -144,6 +123,55 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) return ftrace_modify_code(pc, old, new, true); } +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS +int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr, + unsigned long addr) +{ + unsigned long pc = rec->ip; + u32 old, new; + + old = aarch64_insn_gen_branch_imm(pc, old_addr, + AARCH64_INSN_BRANCH_LINK); + new = aarch64_insn_gen_branch_imm(pc, addr, AARCH64_INSN_BRANCH_LINK); + + return ftrace_modify_code(pc, old, new, true); +} + +/* + * The compiler has inserted two NOPs before the regular function prologue. + * All instrumented functions follow the AAPCS, so x0-x8 and x19-x30 are live, + * and x9-x18 are free for our use. + * + * At runtime we want to be able to swing a single NOP <-> BL to enable or + * disable the ftrace call. The BL requires us to save the original LR value, + * so here we insert a <MOV X9, LR> over the first NOP so the instructions + * before the regular prologue are: + * + * | Compiled | Disabled | Enabled | + * +----------+------------+------------+ + * | NOP | MOV X9, LR | MOV X9, LR | + * | NOP | NOP | BL <entry> | + * + * The LR value will be recovered by ftrace_regs_entry, and restored into LR + * before returning to the regular function prologue. When a function is not + * being traced, the MOV is not harmful given x9 is not live per the AAPCS. + * + * Note: ftrace_process_locs() has pre-adjusted rec->ip to be the address of + * the BL. + */ +int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec) +{ + unsigned long pc = rec->ip - AARCH64_INSN_SIZE; + u32 old, new; + + old = aarch64_insn_gen_nop(); + new = aarch64_insn_gen_move_reg(AARCH64_INSN_REG_9, + AARCH64_INSN_REG_LR, + AARCH64_INSN_VARIANT_64BIT); + return ftrace_modify_code(pc, old, new, true); +} +#endif + /* * Turn off the call to ftrace_caller() in instrumented function */ @@ -156,9 +184,11 @@ int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec, long offset = (long)pc - (long)addr; if (offset < -SZ_128M || offset >= SZ_128M) { -#ifdef CONFIG_ARM64_MODULE_PLTS u32 replaced; + if (!IS_ENABLED(CONFIG_ARM64_MODULE_PLTS)) + return -EINVAL; + /* * 'mod' is only set at module load time, but if we end up * dealing with an out-of-range condition, we can assume it @@ -189,9 +219,6 @@ int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec, return -EINVAL; validate = false; -#else /* CONFIG_ARM64_MODULE_PLTS */ - return -EINVAL; -#endif /* CONFIG_ARM64_MODULE_PLTS */ } else { old = aarch64_insn_gen_branch_imm(pc, addr, AARCH64_INSN_BRANCH_LINK); diff --git a/arch/arm64/kernel/hibernate.c b/arch/arm64/kernel/hibernate.c index e0a7fce0e01c..a96b2921d22c 100644 --- a/arch/arm64/kernel/hibernate.c +++ b/arch/arm64/kernel/hibernate.c @@ -201,6 +201,7 @@ static int create_safe_exec_page(void *src_start, size_t length, gfp_t mask) { int rc = 0; + pgd_t *trans_pgd; pgd_t *pgdp; pud_t *pudp; pmd_t *pmdp; @@ -215,7 +216,13 @@ static int create_safe_exec_page(void *src_start, size_t length, memcpy((void *)dst, src_start, length); __flush_icache_range(dst, dst + length); - pgdp = pgd_offset_raw(allocator(mask), dst_addr); + trans_pgd = allocator(mask); + if (!trans_pgd) { + rc = -ENOMEM; + goto out; + } + + pgdp = pgd_offset_raw(trans_pgd, dst_addr); if (pgd_none(READ_ONCE(*pgdp))) { pudp = allocator(mask); if (!pudp) { diff --git a/arch/arm64/kernel/hw_breakpoint.c b/arch/arm64/kernel/hw_breakpoint.c index 38ee1514cd9c..0b727edf4104 100644 --- a/arch/arm64/kernel/hw_breakpoint.c +++ b/arch/arm64/kernel/hw_breakpoint.c @@ -51,7 +51,7 @@ int hw_breakpoint_slots(int type) case TYPE_DATA: return get_num_wrps(); default: - pr_warning("unknown slot type: %d\n", type); + pr_warn("unknown slot type: %d\n", type); return 0; } } @@ -112,7 +112,7 @@ static u64 read_wb_reg(int reg, int n) GEN_READ_WB_REG_CASES(AARCH64_DBG_REG_WVR, AARCH64_DBG_REG_NAME_WVR, val); GEN_READ_WB_REG_CASES(AARCH64_DBG_REG_WCR, AARCH64_DBG_REG_NAME_WCR, val); default: - pr_warning("attempt to read from unknown breakpoint register %d\n", n); + pr_warn("attempt to read from unknown breakpoint register %d\n", n); } return val; @@ -127,7 +127,7 @@ static void write_wb_reg(int reg, int n, u64 val) GEN_WRITE_WB_REG_CASES(AARCH64_DBG_REG_WVR, AARCH64_DBG_REG_NAME_WVR, val); GEN_WRITE_WB_REG_CASES(AARCH64_DBG_REG_WCR, AARCH64_DBG_REG_NAME_WCR, val); default: - pr_warning("attempt to write to unknown breakpoint register %d\n", n); + pr_warn("attempt to write to unknown breakpoint register %d\n", n); } isb(); } @@ -145,7 +145,7 @@ static enum dbg_active_el debug_exception_level(int privilege) case AARCH64_BREAKPOINT_EL1: return DBG_ACTIVE_EL1; default: - pr_warning("invalid breakpoint privilege level %d\n", privilege); + pr_warn("invalid breakpoint privilege level %d\n", privilege); return -EINVAL; } } diff --git a/arch/arm64/kernel/insn.c b/arch/arm64/kernel/insn.c index d801a7094076..513b29c3e735 100644 --- a/arch/arm64/kernel/insn.c +++ b/arch/arm64/kernel/insn.c @@ -1268,6 +1268,19 @@ u32 aarch64_insn_gen_logical_shifted_reg(enum aarch64_insn_register dst, return aarch64_insn_encode_immediate(AARCH64_INSN_IMM_6, insn, shift); } +/* + * MOV (register) is architecturally an alias of ORR (shifted register) where + * MOV <*d>, <*m> is equivalent to ORR <*d>, <*ZR>, <*m> + */ +u32 aarch64_insn_gen_move_reg(enum aarch64_insn_register dst, + enum aarch64_insn_register src, + enum aarch64_insn_variant variant) +{ + return aarch64_insn_gen_logical_shifted_reg(dst, AARCH64_INSN_REG_ZR, + src, 0, variant, + AARCH64_INSN_LOGIC_ORR); +} + u32 aarch64_insn_gen_adr(unsigned long pc, unsigned long addr, enum aarch64_insn_register reg, enum aarch64_insn_adr_type type) diff --git a/arch/arm64/kernel/kaslr.c b/arch/arm64/kernel/kaslr.c index 416f537bf614..2a11a962e571 100644 --- a/arch/arm64/kernel/kaslr.c +++ b/arch/arm64/kernel/kaslr.c @@ -19,6 +19,14 @@ #include <asm/pgtable.h> #include <asm/sections.h> +enum kaslr_status { + KASLR_ENABLED, + KASLR_DISABLED_CMDLINE, + KASLR_DISABLED_NO_SEED, + KASLR_DISABLED_FDT_REMAP, +}; + +static enum kaslr_status __initdata kaslr_status; u64 __ro_after_init module_alloc_base; u16 __initdata memstart_offset_seed; @@ -91,15 +99,15 @@ u64 __init kaslr_early_init(u64 dt_phys) */ early_fixmap_init(); fdt = fixmap_remap_fdt(dt_phys, &size, PAGE_KERNEL); - if (!fdt) + if (!fdt) { + kaslr_status = KASLR_DISABLED_FDT_REMAP; return 0; + } /* * Retrieve (and wipe) the seed from the FDT */ seed = get_kaslr_seed(fdt); - if (!seed) - return 0; /* * Check if 'nokaslr' appears on the command line, and @@ -107,8 +115,15 @@ u64 __init kaslr_early_init(u64 dt_phys) */ cmdline = kaslr_get_cmdline(fdt); str = strstr(cmdline, "nokaslr"); - if (str == cmdline || (str > cmdline && *(str - 1) == ' ')) + if (str == cmdline || (str > cmdline && *(str - 1) == ' ')) { + kaslr_status = KASLR_DISABLED_CMDLINE; + return 0; + } + + if (!seed) { + kaslr_status = KASLR_DISABLED_NO_SEED; return 0; + } /* * OK, so we are proceeding with KASLR enabled. Calculate a suitable @@ -170,3 +185,24 @@ u64 __init kaslr_early_init(u64 dt_phys) return offset; } + +static int __init kaslr_init(void) +{ + switch (kaslr_status) { + case KASLR_ENABLED: + pr_info("KASLR enabled\n"); + break; + case KASLR_DISABLED_CMDLINE: + pr_info("KASLR disabled on command line\n"); + break; + case KASLR_DISABLED_NO_SEED: + pr_warn("KASLR disabled due to lack of seed\n"); + break; + case KASLR_DISABLED_FDT_REMAP: + pr_warn("KASLR disabled due to FDT remapping failure\n"); + break; + } + + return 0; +} +core_initcall(kaslr_init) diff --git a/arch/arm64/kernel/module-plts.c b/arch/arm64/kernel/module-plts.c index b182442b87a3..65b08a74aec6 100644 --- a/arch/arm64/kernel/module-plts.c +++ b/arch/arm64/kernel/module-plts.c @@ -4,6 +4,7 @@ */ #include <linux/elf.h> +#include <linux/ftrace.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/sort.h> @@ -330,7 +331,7 @@ int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs, tramp->sh_type = SHT_NOBITS; tramp->sh_flags = SHF_EXECINSTR | SHF_ALLOC; tramp->sh_addralign = __alignof__(struct plt_entry); - tramp->sh_size = sizeof(struct plt_entry); + tramp->sh_size = NR_FTRACE_PLTS * sizeof(struct plt_entry); } return 0; diff --git a/arch/arm64/kernel/module.c b/arch/arm64/kernel/module.c index 03ff15bffbb6..1cd1a4d0ed30 100644 --- a/arch/arm64/kernel/module.c +++ b/arch/arm64/kernel/module.c @@ -9,6 +9,7 @@ #include <linux/bitops.h> #include <linux/elf.h> +#include <linux/ftrace.h> #include <linux/gfp.h> #include <linux/kasan.h> #include <linux/kernel.h> @@ -470,22 +471,58 @@ overflow: return -ENOEXEC; } -int module_finalize(const Elf_Ehdr *hdr, - const Elf_Shdr *sechdrs, - struct module *me) +static const Elf_Shdr *find_section(const Elf_Ehdr *hdr, + const Elf_Shdr *sechdrs, + const char *name) { const Elf_Shdr *s, *se; const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; for (s = sechdrs, se = sechdrs + hdr->e_shnum; s < se; s++) { - if (strcmp(".altinstructions", secstrs + s->sh_name) == 0) - apply_alternatives_module((void *)s->sh_addr, s->sh_size); -#ifdef CONFIG_ARM64_MODULE_PLTS - if (IS_ENABLED(CONFIG_DYNAMIC_FTRACE) && - !strcmp(".text.ftrace_trampoline", secstrs + s->sh_name)) - me->arch.ftrace_trampoline = (void *)s->sh_addr; -#endif + if (strcmp(name, secstrs + s->sh_name) == 0) + return s; } + return NULL; +} + +static inline void __init_plt(struct plt_entry *plt, unsigned long addr) +{ + *plt = get_plt_entry(addr, plt); +} + +static int module_init_ftrace_plt(const Elf_Ehdr *hdr, + const Elf_Shdr *sechdrs, + struct module *mod) +{ +#if defined(CONFIG_ARM64_MODULE_PLTS) && defined(CONFIG_DYNAMIC_FTRACE) + const Elf_Shdr *s; + struct plt_entry *plts; + + s = find_section(hdr, sechdrs, ".text.ftrace_trampoline"); + if (!s) + return -ENOEXEC; + + plts = (void *)s->sh_addr; + + __init_plt(&plts[FTRACE_PLT_IDX], FTRACE_ADDR); + + if (IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_REGS)) + __init_plt(&plts[FTRACE_REGS_PLT_IDX], FTRACE_REGS_ADDR); + + mod->arch.ftrace_trampolines = plts; +#endif return 0; } + +int module_finalize(const Elf_Ehdr *hdr, + const Elf_Shdr *sechdrs, + struct module *me) +{ + const Elf_Shdr *s; + s = find_section(hdr, sechdrs, ".altinstructions"); + if (s) + apply_alternatives_module((void *)s->sh_addr, s->sh_size); + + return module_init_ftrace_plt(hdr, sechdrs, me); +} diff --git a/arch/arm64/kernel/paravirt.c b/arch/arm64/kernel/paravirt.c index 4cfed91fe256..1ef702b0be2d 100644 --- a/arch/arm64/kernel/paravirt.c +++ b/arch/arm64/kernel/paravirt.c @@ -6,13 +6,153 @@ * Author: Stefano Stabellini <stefano.stabellini@eu.citrix.com> */ +#define pr_fmt(fmt) "arm-pv: " fmt + +#include <linux/arm-smccc.h> +#include <linux/cpuhotplug.h> #include <linux/export.h> +#include <linux/io.h> #include <linux/jump_label.h> +#include <linux/printk.h> +#include <linux/psci.h> +#include <linux/reboot.h> +#include <linux/slab.h> #include <linux/types.h> + #include <asm/paravirt.h> +#include <asm/pvclock-abi.h> +#include <asm/smp_plat.h> struct static_key paravirt_steal_enabled; struct static_key paravirt_steal_rq_enabled; struct paravirt_patch_template pv_ops; EXPORT_SYMBOL_GPL(pv_ops); + +struct pv_time_stolen_time_region { + struct pvclock_vcpu_stolen_time *kaddr; +}; + +static DEFINE_PER_CPU(struct pv_time_stolen_time_region, stolen_time_region); + +static bool steal_acc = true; +static int __init parse_no_stealacc(char *arg) +{ + steal_acc = false; + return 0; +} + +early_param("no-steal-acc", parse_no_stealacc); + +/* return stolen time in ns by asking the hypervisor */ +static u64 pv_steal_clock(int cpu) +{ + struct pv_time_stolen_time_region *reg; + + reg = per_cpu_ptr(&stolen_time_region, cpu); + if (!reg->kaddr) { + pr_warn_once("stolen time enabled but not configured for cpu %d\n", + cpu); + return 0; + } + + return le64_to_cpu(READ_ONCE(reg->kaddr->stolen_time)); +} + +static int stolen_time_dying_cpu(unsigned int cpu) +{ + struct pv_time_stolen_time_region *reg; + + reg = this_cpu_ptr(&stolen_time_region); + if (!reg->kaddr) + return 0; + + memunmap(reg->kaddr); + memset(reg, 0, sizeof(*reg)); + + return 0; +} + +static int init_stolen_time_cpu(unsigned int cpu) +{ + struct pv_time_stolen_time_region *reg; + struct arm_smccc_res res; + + reg = this_cpu_ptr(&stolen_time_region); + + arm_smccc_1_1_invoke(ARM_SMCCC_HV_PV_TIME_ST, &res); + + if (res.a0 == SMCCC_RET_NOT_SUPPORTED) + return -EINVAL; + + reg->kaddr = memremap(res.a0, + sizeof(struct pvclock_vcpu_stolen_time), + MEMREMAP_WB); + + if (!reg->kaddr) { + pr_warn("Failed to map stolen time data structure\n"); + return -ENOMEM; + } + + if (le32_to_cpu(reg->kaddr->revision) != 0 || + le32_to_cpu(reg->kaddr->attributes) != 0) { + pr_warn_once("Unexpected revision or attributes in stolen time data\n"); + return -ENXIO; + } + + return 0; +} + +static int pv_time_init_stolen_time(void) +{ + int ret; + + ret = cpuhp_setup_state(CPUHP_AP_ARM_KVMPV_STARTING, + "hypervisor/arm/pvtime:starting", + init_stolen_time_cpu, stolen_time_dying_cpu); + if (ret < 0) + return ret; + return 0; +} + +static bool has_pv_steal_clock(void) +{ + struct arm_smccc_res res; + + /* To detect the presence of PV time support we require SMCCC 1.1+ */ + if (psci_ops.smccc_version < SMCCC_VERSION_1_1) + return false; + + arm_smccc_1_1_invoke(ARM_SMCCC_ARCH_FEATURES_FUNC_ID, + ARM_SMCCC_HV_PV_TIME_FEATURES, &res); + + if (res.a0 != SMCCC_RET_SUCCESS) + return false; + + arm_smccc_1_1_invoke(ARM_SMCCC_HV_PV_TIME_FEATURES, + ARM_SMCCC_HV_PV_TIME_ST, &res); + + return (res.a0 == SMCCC_RET_SUCCESS); +} + +int __init pv_time_init(void) +{ + int ret; + + if (!has_pv_steal_clock()) + return 0; + + ret = pv_time_init_stolen_time(); + if (ret) + return ret; + + pv_ops.time.steal_clock = pv_steal_clock; + + static_key_slow_inc(¶virt_steal_enabled); + if (steal_acc) + static_key_slow_inc(¶virt_steal_rq_enabled); + + pr_info("using stolen time PV\n"); + + return 0; +} diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c index a0b4f1bca491..e40b65645c86 100644 --- a/arch/arm64/kernel/perf_event.c +++ b/arch/arm64/kernel/perf_event.c @@ -158,133 +158,74 @@ armv8pmu_events_sysfs_show(struct device *dev, return sprintf(page, "event=0x%03llx\n", pmu_attr->id); } -#define ARMV8_EVENT_ATTR(name, config) \ - PMU_EVENT_ATTR(name, armv8_event_attr_##name, \ - config, armv8pmu_events_sysfs_show) - -ARMV8_EVENT_ATTR(sw_incr, ARMV8_PMUV3_PERFCTR_SW_INCR); -ARMV8_EVENT_ATTR(l1i_cache_refill, ARMV8_PMUV3_PERFCTR_L1I_CACHE_REFILL); -ARMV8_EVENT_ATTR(l1i_tlb_refill, ARMV8_PMUV3_PERFCTR_L1I_TLB_REFILL); -ARMV8_EVENT_ATTR(l1d_cache_refill, ARMV8_PMUV3_PERFCTR_L1D_CACHE_REFILL); -ARMV8_EVENT_ATTR(l1d_cache, ARMV8_PMUV3_PERFCTR_L1D_CACHE); -ARMV8_EVENT_ATTR(l1d_tlb_refill, ARMV8_PMUV3_PERFCTR_L1D_TLB_REFILL); -ARMV8_EVENT_ATTR(ld_retired, ARMV8_PMUV3_PERFCTR_LD_RETIRED); -ARMV8_EVENT_ATTR(st_retired, ARMV8_PMUV3_PERFCTR_ST_RETIRED); -ARMV8_EVENT_ATTR(inst_retired, ARMV8_PMUV3_PERFCTR_INST_RETIRED); -ARMV8_EVENT_ATTR(exc_taken, ARMV8_PMUV3_PERFCTR_EXC_TAKEN); -ARMV8_EVENT_ATTR(exc_return, ARMV8_PMUV3_PERFCTR_EXC_RETURN); -ARMV8_EVENT_ATTR(cid_write_retired, ARMV8_PMUV3_PERFCTR_CID_WRITE_RETIRED); -ARMV8_EVENT_ATTR(pc_write_retired, ARMV8_PMUV3_PERFCTR_PC_WRITE_RETIRED); -ARMV8_EVENT_ATTR(br_immed_retired, ARMV8_PMUV3_PERFCTR_BR_IMMED_RETIRED); -ARMV8_EVENT_ATTR(br_return_retired, ARMV8_PMUV3_PERFCTR_BR_RETURN_RETIRED); -ARMV8_EVENT_ATTR(unaligned_ldst_retired, ARMV8_PMUV3_PERFCTR_UNALIGNED_LDST_RETIRED); -ARMV8_EVENT_ATTR(br_mis_pred, ARMV8_PMUV3_PERFCTR_BR_MIS_PRED); -ARMV8_EVENT_ATTR(cpu_cycles, ARMV8_PMUV3_PERFCTR_CPU_CYCLES); -ARMV8_EVENT_ATTR(br_pred, ARMV8_PMUV3_PERFCTR_BR_PRED); -ARMV8_EVENT_ATTR(mem_access, ARMV8_PMUV3_PERFCTR_MEM_ACCESS); -ARMV8_EVENT_ATTR(l1i_cache, ARMV8_PMUV3_PERFCTR_L1I_CACHE); -ARMV8_EVENT_ATTR(l1d_cache_wb, ARMV8_PMUV3_PERFCTR_L1D_CACHE_WB); -ARMV8_EVENT_ATTR(l2d_cache, ARMV8_PMUV3_PERFCTR_L2D_CACHE); -ARMV8_EVENT_ATTR(l2d_cache_refill, ARMV8_PMUV3_PERFCTR_L2D_CACHE_REFILL); -ARMV8_EVENT_ATTR(l2d_cache_wb, ARMV8_PMUV3_PERFCTR_L2D_CACHE_WB); -ARMV8_EVENT_ATTR(bus_access, ARMV8_PMUV3_PERFCTR_BUS_ACCESS); -ARMV8_EVENT_ATTR(memory_error, ARMV8_PMUV3_PERFCTR_MEMORY_ERROR); -ARMV8_EVENT_ATTR(inst_spec, ARMV8_PMUV3_PERFCTR_INST_SPEC); -ARMV8_EVENT_ATTR(ttbr_write_retired, ARMV8_PMUV3_PERFCTR_TTBR_WRITE_RETIRED); -ARMV8_EVENT_ATTR(bus_cycles, ARMV8_PMUV3_PERFCTR_BUS_CYCLES); -/* Don't expose the chain event in /sys, since it's useless in isolation */ -ARMV8_EVENT_ATTR(l1d_cache_allocate, ARMV8_PMUV3_PERFCTR_L1D_CACHE_ALLOCATE); -ARMV8_EVENT_ATTR(l2d_cache_allocate, ARMV8_PMUV3_PERFCTR_L2D_CACHE_ALLOCATE); -ARMV8_EVENT_ATTR(br_retired, ARMV8_PMUV3_PERFCTR_BR_RETIRED); -ARMV8_EVENT_ATTR(br_mis_pred_retired, ARMV8_PMUV3_PERFCTR_BR_MIS_PRED_RETIRED); -ARMV8_EVENT_ATTR(stall_frontend, ARMV8_PMUV3_PERFCTR_STALL_FRONTEND); -ARMV8_EVENT_ATTR(stall_backend, ARMV8_PMUV3_PERFCTR_STALL_BACKEND); -ARMV8_EVENT_ATTR(l1d_tlb, ARMV8_PMUV3_PERFCTR_L1D_TLB); -ARMV8_EVENT_ATTR(l1i_tlb, ARMV8_PMUV3_PERFCTR_L1I_TLB); -ARMV8_EVENT_ATTR(l2i_cache, ARMV8_PMUV3_PERFCTR_L2I_CACHE); -ARMV8_EVENT_ATTR(l2i_cache_refill, ARMV8_PMUV3_PERFCTR_L2I_CACHE_REFILL); -ARMV8_EVENT_ATTR(l3d_cache_allocate, ARMV8_PMUV3_PERFCTR_L3D_CACHE_ALLOCATE); -ARMV8_EVENT_ATTR(l3d_cache_refill, ARMV8_PMUV3_PERFCTR_L3D_CACHE_REFILL); -ARMV8_EVENT_ATTR(l3d_cache, ARMV8_PMUV3_PERFCTR_L3D_CACHE); -ARMV8_EVENT_ATTR(l3d_cache_wb, ARMV8_PMUV3_PERFCTR_L3D_CACHE_WB); -ARMV8_EVENT_ATTR(l2d_tlb_refill, ARMV8_PMUV3_PERFCTR_L2D_TLB_REFILL); -ARMV8_EVENT_ATTR(l2i_tlb_refill, ARMV8_PMUV3_PERFCTR_L2I_TLB_REFILL); -ARMV8_EVENT_ATTR(l2d_tlb, ARMV8_PMUV3_PERFCTR_L2D_TLB); -ARMV8_EVENT_ATTR(l2i_tlb, ARMV8_PMUV3_PERFCTR_L2I_TLB); -ARMV8_EVENT_ATTR(remote_access, ARMV8_PMUV3_PERFCTR_REMOTE_ACCESS); -ARMV8_EVENT_ATTR(ll_cache, ARMV8_PMUV3_PERFCTR_LL_CACHE); -ARMV8_EVENT_ATTR(ll_cache_miss, ARMV8_PMUV3_PERFCTR_LL_CACHE_MISS); -ARMV8_EVENT_ATTR(dtlb_walk, ARMV8_PMUV3_PERFCTR_DTLB_WALK); -ARMV8_EVENT_ATTR(itlb_walk, ARMV8_PMUV3_PERFCTR_ITLB_WALK); -ARMV8_EVENT_ATTR(ll_cache_rd, ARMV8_PMUV3_PERFCTR_LL_CACHE_RD); -ARMV8_EVENT_ATTR(ll_cache_miss_rd, ARMV8_PMUV3_PERFCTR_LL_CACHE_MISS_RD); -ARMV8_EVENT_ATTR(remote_access_rd, ARMV8_PMUV3_PERFCTR_REMOTE_ACCESS_RD); -ARMV8_EVENT_ATTR(sample_pop, ARMV8_SPE_PERFCTR_SAMPLE_POP); -ARMV8_EVENT_ATTR(sample_feed, ARMV8_SPE_PERFCTR_SAMPLE_FEED); -ARMV8_EVENT_ATTR(sample_filtrate, ARMV8_SPE_PERFCTR_SAMPLE_FILTRATE); -ARMV8_EVENT_ATTR(sample_collision, ARMV8_SPE_PERFCTR_SAMPLE_COLLISION); +#define ARMV8_EVENT_ATTR(name, config) \ + (&((struct perf_pmu_events_attr) { \ + .attr = __ATTR(name, 0444, armv8pmu_events_sysfs_show, NULL), \ + .id = config, \ + }).attr.attr) static struct attribute *armv8_pmuv3_event_attrs[] = { - &armv8_event_attr_sw_incr.attr.attr, - &armv8_event_attr_l1i_cache_refill.attr.attr, - &armv8_event_attr_l1i_tlb_refill.attr.attr, - &armv8_event_attr_l1d_cache_refill.attr.attr, - &armv8_event_attr_l1d_cache.attr.attr, - &armv8_event_attr_l1d_tlb_refill.attr.attr, - &armv8_event_attr_ld_retired.attr.attr, - &armv8_event_attr_st_retired.attr.attr, - &armv8_event_attr_inst_retired.attr.attr, - &armv8_event_attr_exc_taken.attr.attr, - &armv8_event_attr_exc_return.attr.attr, - &armv8_event_attr_cid_write_retired.attr.attr, - &armv8_event_attr_pc_write_retired.attr.attr, - &armv8_event_attr_br_immed_retired.attr.attr, - &armv8_event_attr_br_return_retired.attr.attr, - &armv8_event_attr_unaligned_ldst_retired.attr.attr, - &armv8_event_attr_br_mis_pred.attr.attr, - &armv8_event_attr_cpu_cycles.attr.attr, - &armv8_event_attr_br_pred.attr.attr, - &armv8_event_attr_mem_access.attr.attr, - &armv8_event_attr_l1i_cache.attr.attr, - &armv8_event_attr_l1d_cache_wb.attr.attr, - &armv8_event_attr_l2d_cache.attr.attr, - &armv8_event_attr_l2d_cache_refill.attr.attr, - &armv8_event_attr_l2d_cache_wb.attr.attr, - &armv8_event_attr_bus_access.attr.attr, - &armv8_event_attr_memory_error.attr.attr, - &armv8_event_attr_inst_spec.attr.attr, - &armv8_event_attr_ttbr_write_retired.attr.attr, - &armv8_event_attr_bus_cycles.attr.attr, - &armv8_event_attr_l1d_cache_allocate.attr.attr, - &armv8_event_attr_l2d_cache_allocate.attr.attr, - &armv8_event_attr_br_retired.attr.attr, - &armv8_event_attr_br_mis_pred_retired.attr.attr, - &armv8_event_attr_stall_frontend.attr.attr, - &armv8_event_attr_stall_backend.attr.attr, - &armv8_event_attr_l1d_tlb.attr.attr, - &armv8_event_attr_l1i_tlb.attr.attr, - &armv8_event_attr_l2i_cache.attr.attr, - &armv8_event_attr_l2i_cache_refill.attr.attr, - &armv8_event_attr_l3d_cache_allocate.attr.attr, - &armv8_event_attr_l3d_cache_refill.attr.attr, - &armv8_event_attr_l3d_cache.attr.attr, - &armv8_event_attr_l3d_cache_wb.attr.attr, - &armv8_event_attr_l2d_tlb_refill.attr.attr, - &armv8_event_attr_l2i_tlb_refill.attr.attr, - &armv8_event_attr_l2d_tlb.attr.attr, - &armv8_event_attr_l2i_tlb.attr.attr, - &armv8_event_attr_remote_access.attr.attr, - &armv8_event_attr_ll_cache.attr.attr, - &armv8_event_attr_ll_cache_miss.attr.attr, - &armv8_event_attr_dtlb_walk.attr.attr, - &armv8_event_attr_itlb_walk.attr.attr, - &armv8_event_attr_ll_cache_rd.attr.attr, - &armv8_event_attr_ll_cache_miss_rd.attr.attr, - &armv8_event_attr_remote_access_rd.attr.attr, - &armv8_event_attr_sample_pop.attr.attr, - &armv8_event_attr_sample_feed.attr.attr, - &armv8_event_attr_sample_filtrate.attr.attr, - &armv8_event_attr_sample_collision.attr.attr, + ARMV8_EVENT_ATTR(sw_incr, ARMV8_PMUV3_PERFCTR_SW_INCR), + ARMV8_EVENT_ATTR(l1i_cache_refill, ARMV8_PMUV3_PERFCTR_L1I_CACHE_REFILL), + ARMV8_EVENT_ATTR(l1i_tlb_refill, ARMV8_PMUV3_PERFCTR_L1I_TLB_REFILL), + ARMV8_EVENT_ATTR(l1d_cache_refill, ARMV8_PMUV3_PERFCTR_L1D_CACHE_REFILL), + ARMV8_EVENT_ATTR(l1d_cache, ARMV8_PMUV3_PERFCTR_L1D_CACHE), + ARMV8_EVENT_ATTR(l1d_tlb_refill, ARMV8_PMUV3_PERFCTR_L1D_TLB_REFILL), + ARMV8_EVENT_ATTR(ld_retired, ARMV8_PMUV3_PERFCTR_LD_RETIRED), + ARMV8_EVENT_ATTR(st_retired, ARMV8_PMUV3_PERFCTR_ST_RETIRED), + ARMV8_EVENT_ATTR(inst_retired, ARMV8_PMUV3_PERFCTR_INST_RETIRED), + ARMV8_EVENT_ATTR(exc_taken, ARMV8_PMUV3_PERFCTR_EXC_TAKEN), + ARMV8_EVENT_ATTR(exc_return, ARMV8_PMUV3_PERFCTR_EXC_RETURN), + ARMV8_EVENT_ATTR(cid_write_retired, ARMV8_PMUV3_PERFCTR_CID_WRITE_RETIRED), + ARMV8_EVENT_ATTR(pc_write_retired, ARMV8_PMUV3_PERFCTR_PC_WRITE_RETIRED), + ARMV8_EVENT_ATTR(br_immed_retired, ARMV8_PMUV3_PERFCTR_BR_IMMED_RETIRED), + ARMV8_EVENT_ATTR(br_return_retired, ARMV8_PMUV3_PERFCTR_BR_RETURN_RETIRED), + ARMV8_EVENT_ATTR(unaligned_ldst_retired, ARMV8_PMUV3_PERFCTR_UNALIGNED_LDST_RETIRED), + ARMV8_EVENT_ATTR(br_mis_pred, ARMV8_PMUV3_PERFCTR_BR_MIS_PRED), + ARMV8_EVENT_ATTR(cpu_cycles, ARMV8_PMUV3_PERFCTR_CPU_CYCLES), + ARMV8_EVENT_ATTR(br_pred, ARMV8_PMUV3_PERFCTR_BR_PRED), + ARMV8_EVENT_ATTR(mem_access, ARMV8_PMUV3_PERFCTR_MEM_ACCESS), + ARMV8_EVENT_ATTR(l1i_cache, ARMV8_PMUV3_PERFCTR_L1I_CACHE), + ARMV8_EVENT_ATTR(l1d_cache_wb, ARMV8_PMUV3_PERFCTR_L1D_CACHE_WB), + ARMV8_EVENT_ATTR(l2d_cache, ARMV8_PMUV3_PERFCTR_L2D_CACHE), + ARMV8_EVENT_ATTR(l2d_cache_refill, ARMV8_PMUV3_PERFCTR_L2D_CACHE_REFILL), + ARMV8_EVENT_ATTR(l2d_cache_wb, ARMV8_PMUV3_PERFCTR_L2D_CACHE_WB), + ARMV8_EVENT_ATTR(bus_access, ARMV8_PMUV3_PERFCTR_BUS_ACCESS), + ARMV8_EVENT_ATTR(memory_error, ARMV8_PMUV3_PERFCTR_MEMORY_ERROR), + ARMV8_EVENT_ATTR(inst_spec, ARMV8_PMUV3_PERFCTR_INST_SPEC), + ARMV8_EVENT_ATTR(ttbr_write_retired, ARMV8_PMUV3_PERFCTR_TTBR_WRITE_RETIRED), + ARMV8_EVENT_ATTR(bus_cycles, ARMV8_PMUV3_PERFCTR_BUS_CYCLES), + /* Don't expose the chain event in /sys, since it's useless in isolation */ + ARMV8_EVENT_ATTR(l1d_cache_allocate, ARMV8_PMUV3_PERFCTR_L1D_CACHE_ALLOCATE), + ARMV8_EVENT_ATTR(l2d_cache_allocate, ARMV8_PMUV3_PERFCTR_L2D_CACHE_ALLOCATE), + ARMV8_EVENT_ATTR(br_retired, ARMV8_PMUV3_PERFCTR_BR_RETIRED), + ARMV8_EVENT_ATTR(br_mis_pred_retired, ARMV8_PMUV3_PERFCTR_BR_MIS_PRED_RETIRED), + ARMV8_EVENT_ATTR(stall_frontend, ARMV8_PMUV3_PERFCTR_STALL_FRONTEND), + ARMV8_EVENT_ATTR(stall_backend, ARMV8_PMUV3_PERFCTR_STALL_BACKEND), + ARMV8_EVENT_ATTR(l1d_tlb, ARMV8_PMUV3_PERFCTR_L1D_TLB), + ARMV8_EVENT_ATTR(l1i_tlb, ARMV8_PMUV3_PERFCTR_L1I_TLB), + ARMV8_EVENT_ATTR(l2i_cache, ARMV8_PMUV3_PERFCTR_L2I_CACHE), + ARMV8_EVENT_ATTR(l2i_cache_refill, ARMV8_PMUV3_PERFCTR_L2I_CACHE_REFILL), + ARMV8_EVENT_ATTR(l3d_cache_allocate, ARMV8_PMUV3_PERFCTR_L3D_CACHE_ALLOCATE), + ARMV8_EVENT_ATTR(l3d_cache_refill, ARMV8_PMUV3_PERFCTR_L3D_CACHE_REFILL), + ARMV8_EVENT_ATTR(l3d_cache, ARMV8_PMUV3_PERFCTR_L3D_CACHE), + ARMV8_EVENT_ATTR(l3d_cache_wb, ARMV8_PMUV3_PERFCTR_L3D_CACHE_WB), + ARMV8_EVENT_ATTR(l2d_tlb_refill, ARMV8_PMUV3_PERFCTR_L2D_TLB_REFILL), + ARMV8_EVENT_ATTR(l2i_tlb_refill, ARMV8_PMUV3_PERFCTR_L2I_TLB_REFILL), + ARMV8_EVENT_ATTR(l2d_tlb, ARMV8_PMUV3_PERFCTR_L2D_TLB), + ARMV8_EVENT_ATTR(l2i_tlb, ARMV8_PMUV3_PERFCTR_L2I_TLB), + ARMV8_EVENT_ATTR(remote_access, ARMV8_PMUV3_PERFCTR_REMOTE_ACCESS), + ARMV8_EVENT_ATTR(ll_cache, ARMV8_PMUV3_PERFCTR_LL_CACHE), + ARMV8_EVENT_ATTR(ll_cache_miss, ARMV8_PMUV3_PERFCTR_LL_CACHE_MISS), + ARMV8_EVENT_ATTR(dtlb_walk, ARMV8_PMUV3_PERFCTR_DTLB_WALK), + ARMV8_EVENT_ATTR(itlb_walk, ARMV8_PMUV3_PERFCTR_ITLB_WALK), + ARMV8_EVENT_ATTR(ll_cache_rd, ARMV8_PMUV3_PERFCTR_LL_CACHE_RD), + ARMV8_EVENT_ATTR(ll_cache_miss_rd, ARMV8_PMUV3_PERFCTR_LL_CACHE_MISS_RD), + ARMV8_EVENT_ATTR(remote_access_rd, ARMV8_PMUV3_PERFCTR_REMOTE_ACCESS_RD), + ARMV8_EVENT_ATTR(sample_pop, ARMV8_SPE_PERFCTR_SAMPLE_POP), + ARMV8_EVENT_ATTR(sample_feed, ARMV8_SPE_PERFCTR_SAMPLE_FEED), + ARMV8_EVENT_ATTR(sample_filtrate, ARMV8_SPE_PERFCTR_SAMPLE_FILTRATE), + ARMV8_EVENT_ATTR(sample_collision, ARMV8_SPE_PERFCTR_SAMPLE_COLLISION), NULL, }; diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c index c4452827419b..d1c95dcf1d78 100644 --- a/arch/arm64/kernel/probes/kprobes.c +++ b/arch/arm64/kernel/probes/kprobes.c @@ -455,10 +455,6 @@ int __init arch_populate_kprobe_blacklist(void) (unsigned long)__irqentry_text_end); if (ret) return ret; - ret = kprobe_add_area_blacklist((unsigned long)__exception_text_start, - (unsigned long)__exception_text_end); - if (ret) - return ret; ret = kprobe_add_area_blacklist((unsigned long)__idmap_text_start, (unsigned long)__idmap_text_end); if (ret) diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c index 1fb2819fc048..71f788cd2b18 100644 --- a/arch/arm64/kernel/process.c +++ b/arch/arm64/kernel/process.c @@ -17,6 +17,7 @@ #include <linux/sched/task.h> #include <linux/sched/task_stack.h> #include <linux/kernel.h> +#include <linux/lockdep.h> #include <linux/mm.h> #include <linux/stddef.h> #include <linux/sysctl.h> @@ -44,6 +45,7 @@ #include <asm/alternative.h> #include <asm/arch_gicv3.h> #include <asm/compat.h> +#include <asm/cpufeature.h> #include <asm/cacheflush.h> #include <asm/exec.h> #include <asm/fpsimd.h> @@ -631,3 +633,19 @@ static int __init tagged_addr_init(void) core_initcall(tagged_addr_init); #endif /* CONFIG_ARM64_TAGGED_ADDR_ABI */ + +asmlinkage void __sched arm64_preempt_schedule_irq(void) +{ + lockdep_assert_irqs_disabled(); + + /* + * Preempting a task from an IRQ means we leave copies of PSTATE + * on the stack. cpufeature's enable calls may modify PSTATE, but + * resuming one of these preempted tasks would undo those changes. + * + * Only allow a task to be preempted once cpufeatures have been + * enabled. + */ + if (static_branch_likely(&arm64_const_caps_ready)) + preempt_schedule_irq(); +} diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c index c9f72b2665f1..43ae4e0c968f 100644 --- a/arch/arm64/kernel/psci.c +++ b/arch/arm64/kernel/psci.c @@ -81,7 +81,8 @@ static void cpu_psci_cpu_die(unsigned int cpu) static int cpu_psci_cpu_kill(unsigned int cpu) { - int err, i; + int err; + unsigned long start, end; if (!psci_ops.affinity_info) return 0; @@ -91,16 +92,18 @@ static int cpu_psci_cpu_kill(unsigned int cpu) * while it is dying. So, try again a few times. */ - for (i = 0; i < 10; i++) { + start = jiffies; + end = start + msecs_to_jiffies(100); + do { err = psci_ops.affinity_info(cpu_logical_map(cpu), 0); if (err == PSCI_0_2_AFFINITY_LEVEL_OFF) { - pr_info("CPU%d killed.\n", cpu); + pr_info("CPU%d killed (polled %d ms)\n", cpu, + jiffies_to_msecs(jiffies - start)); return 0; } - msleep(10); - pr_info("Retrying again to check for CPU kill\n"); - } + usleep_range(100, 1000); + } while (time_before(jiffies, end)); pr_warn("CPU%d may not have shut down cleanly (AFFINITY_INFO reports %d)\n", cpu, err); diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index 21176d02e21a..6771c399d40c 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -1816,7 +1816,7 @@ int syscall_trace_enter(struct pt_regs *regs) } /* Do the secure computing after ptrace; failures should be fast. */ - if (secure_computing(NULL) == -1) + if (secure_computing() == -1) return -1; if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) diff --git a/arch/arm64/kernel/sdei.c b/arch/arm64/kernel/sdei.c index ea94cf8f9dc6..d6259dac62b6 100644 --- a/arch/arm64/kernel/sdei.c +++ b/arch/arm64/kernel/sdei.c @@ -2,6 +2,7 @@ // Copyright (C) 2017 Arm Ltd. #define pr_fmt(fmt) "sdei: " fmt +#include <linux/arm-smccc.h> #include <linux/arm_sdei.h> #include <linux/hardirq.h> #include <linux/irqflags.h> @@ -161,7 +162,7 @@ unsigned long sdei_arch_get_entry_point(int conduit) return 0; } - sdei_exit_mode = (conduit == CONDUIT_HVC) ? SDEI_EXIT_HVC : SDEI_EXIT_SMC; + sdei_exit_mode = (conduit == SMCCC_CONDUIT_HVC) ? SDEI_EXIT_HVC : SDEI_EXIT_SMC; #ifdef CONFIG_UNMAP_KERNEL_AT_EL0 if (arm64_kernel_unmapped_at_el0()) { diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c index dc9fe879c279..ab149bcc3dc7 100644 --- a/arch/arm64/kernel/smp.c +++ b/arch/arm64/kernel/smp.c @@ -345,8 +345,7 @@ void __cpu_die(unsigned int cpu) */ err = op_cpu_kill(cpu); if (err) - pr_warn("CPU%d may not have shut down cleanly: %d\n", - cpu, err); + pr_warn("CPU%d may not have shut down cleanly: %d\n", cpu, err); } /* @@ -976,8 +975,8 @@ void smp_send_stop(void) udelay(1); if (num_online_cpus() > 1) - pr_warning("SMP: failed to stop secondary CPUs %*pbl\n", - cpumask_pr_args(cpu_online_mask)); + pr_warn("SMP: failed to stop secondary CPUs %*pbl\n", + cpumask_pr_args(cpu_online_mask)); sdei_mask_local_cpu(); } @@ -1017,8 +1016,8 @@ void crash_smp_send_stop(void) udelay(1); if (atomic_read(&waiting_for_crash_ipi) > 0) - pr_warning("SMP: failed to stop secondary CPUs %*pbl\n", - cpumask_pr_args(&mask)); + pr_warn("SMP: failed to stop secondary CPUs %*pbl\n", + cpumask_pr_args(&mask)); sdei_mask_local_cpu(); } diff --git a/arch/arm64/kernel/sys_compat.c b/arch/arm64/kernel/sys_compat.c index f1cb64959427..3c18c2454089 100644 --- a/arch/arm64/kernel/sys_compat.c +++ b/arch/arm64/kernel/sys_compat.c @@ -8,6 +8,7 @@ */ #include <linux/compat.h> +#include <linux/cpufeature.h> #include <linux/personality.h> #include <linux/sched.h> #include <linux/sched/signal.h> @@ -17,6 +18,7 @@ #include <asm/cacheflush.h> #include <asm/system_misc.h> +#include <asm/tlbflush.h> #include <asm/unistd.h> static long @@ -30,6 +32,15 @@ __do_compat_cache_op(unsigned long start, unsigned long end) if (fatal_signal_pending(current)) return 0; + if (cpus_have_const_cap(ARM64_WORKAROUND_1542419)) { + /* + * The workaround requires an inner-shareable tlbi. + * We pick the reserved-ASID to minimise the impact. + */ + __tlbi(aside1is, __TLBI_VADDR(0, 0)); + dsb(ish); + } + ret = __flush_cache_user_range(start, start + chunk); if (ret) return ret; diff --git a/arch/arm64/kernel/syscall.c b/arch/arm64/kernel/syscall.c index 871c739f060a..9a9d98a443fc 100644 --- a/arch/arm64/kernel/syscall.c +++ b/arch/arm64/kernel/syscall.c @@ -154,14 +154,14 @@ static inline void sve_user_discard(void) sve_user_disable(); } -asmlinkage void el0_svc_handler(struct pt_regs *regs) +void el0_svc_handler(struct pt_regs *regs) { sve_user_discard(); el0_svc_common(regs, regs->regs[8], __NR_syscalls, sys_call_table); } #ifdef CONFIG_COMPAT -asmlinkage void el0_svc_compat_handler(struct pt_regs *regs) +void el0_svc_compat_handler(struct pt_regs *regs) { el0_svc_common(regs, regs->regs[7], __NR_compat_syscalls, compat_sys_call_table); diff --git a/arch/arm64/kernel/time.c b/arch/arm64/kernel/time.c index 0b2946414dc9..73f06d4b3aae 100644 --- a/arch/arm64/kernel/time.c +++ b/arch/arm64/kernel/time.c @@ -30,6 +30,7 @@ #include <asm/thread_info.h> #include <asm/stacktrace.h> +#include <asm/paravirt.h> unsigned long profile_pc(struct pt_regs *regs) { @@ -65,4 +66,6 @@ void __init time_init(void) /* Calibrate the delay loop directly */ lpj_fine = arch_timer_rate / HZ; + + pv_time_init(); } diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c index 34739e80211b..73caf35c2262 100644 --- a/arch/arm64/kernel/traps.c +++ b/arch/arm64/kernel/traps.c @@ -35,6 +35,7 @@ #include <asm/debug-monitors.h> #include <asm/esr.h> #include <asm/insn.h> +#include <asm/kprobes.h> #include <asm/traps.h> #include <asm/smp.h> #include <asm/stack_pointer.h> @@ -393,7 +394,7 @@ void arm64_notify_segfault(unsigned long addr) force_signal_inject(SIGSEGV, code, addr); } -asmlinkage void __exception do_undefinstr(struct pt_regs *regs) +void do_undefinstr(struct pt_regs *regs) { /* check for AArch32 breakpoint instructions */ if (!aarch32_break_handler(regs)) @@ -405,6 +406,7 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs) BUG_ON(!user_mode(regs)); force_signal_inject(SIGILL, ILL_ILLOPC, regs->pc); } +NOKPROBE_SYMBOL(do_undefinstr); #define __user_cache_maint(insn, address, res) \ if (address >= user_addr_max()) { \ @@ -470,6 +472,15 @@ static void ctr_read_handler(unsigned int esr, struct pt_regs *regs) int rt = ESR_ELx_SYS64_ISS_RT(esr); unsigned long val = arm64_ftr_reg_user_value(&arm64_ftr_reg_ctrel0); + if (cpus_have_const_cap(ARM64_WORKAROUND_1542419)) { + /* Hide DIC so that we can trap the unnecessary maintenance...*/ + val &= ~BIT(CTR_DIC_SHIFT); + + /* ... and fake IminLine to reduce the number of traps. */ + val &= ~CTR_IMINLINE_MASK; + val |= (PAGE_SHIFT - 2) & CTR_IMINLINE_MASK; + } + pt_regs_write_reg(regs, rt, val); arm64_skip_faulting_instruction(regs, AARCH64_INSN_SIZE); @@ -667,7 +678,7 @@ static const struct sys64_hook cp15_64_hooks[] = { {}, }; -asmlinkage void __exception do_cp15instr(unsigned int esr, struct pt_regs *regs) +void do_cp15instr(unsigned int esr, struct pt_regs *regs) { const struct sys64_hook *hook, *hook_base; @@ -705,9 +716,10 @@ asmlinkage void __exception do_cp15instr(unsigned int esr, struct pt_regs *regs) */ do_undefinstr(regs); } +NOKPROBE_SYMBOL(do_cp15instr); #endif -asmlinkage void __exception do_sysinstr(unsigned int esr, struct pt_regs *regs) +void do_sysinstr(unsigned int esr, struct pt_regs *regs) { const struct sys64_hook *hook; @@ -724,6 +736,7 @@ asmlinkage void __exception do_sysinstr(unsigned int esr, struct pt_regs *regs) */ do_undefinstr(regs); } +NOKPROBE_SYMBOL(do_sysinstr); static const char *esr_class_str[] = { [0 ... ESR_ELx_EC_MAX] = "UNRECOGNIZED EC", @@ -793,7 +806,7 @@ asmlinkage void bad_mode(struct pt_regs *regs, int reason, unsigned int esr) * bad_el0_sync handles unexpected, but potentially recoverable synchronous * exceptions taken from EL0. Unlike bad_mode, this returns. */ -asmlinkage void bad_el0_sync(struct pt_regs *regs, int reason, unsigned int esr) +void bad_el0_sync(struct pt_regs *regs, int reason, unsigned int esr) { void __user *pc = (void __user *)instruction_pointer(regs); diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S index aa76f7259668..841a8b4ce114 100644 --- a/arch/arm64/kernel/vmlinux.lds.S +++ b/arch/arm64/kernel/vmlinux.lds.S @@ -5,6 +5,8 @@ * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz> */ +#define RO_EXCEPTION_TABLE_ALIGN 8 + #include <asm-generic/vmlinux.lds.h> #include <asm/cache.h> #include <asm/kernel-pgtable.h> @@ -111,9 +113,6 @@ SECTIONS } .text : { /* Real text segment */ _stext = .; /* Text and read-only data */ - __exception_text_start = .; - *(.exception.text) - __exception_text_end = .; IRQENTRY_TEXT SOFTIRQENTRY_TEXT ENTRY_TEXT @@ -135,11 +134,9 @@ SECTIONS . = ALIGN(SEGMENT_ALIGN); _etext = .; /* End of text section */ - RO_DATA(PAGE_SIZE) /* everything from this point to */ - EXCEPTION_TABLE(8) /* __init_begin will be marked RO NX */ - NOTES + /* everything from this point to __init_begin will be marked RO NX */ + RO_DATA(PAGE_SIZE) - . = ALIGN(PAGE_SIZE); idmap_pg_dir = .; . += IDMAP_DIR_SIZE; @@ -215,7 +212,7 @@ SECTIONS _data = .; _sdata = .; - RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_ALIGN) + RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_ALIGN) /* * Data written with the MMU off but read with the MMU on requires diff --git a/arch/arm64/kvm/Kconfig b/arch/arm64/kvm/Kconfig index a67121d419a2..a475c68cbfec 100644 --- a/arch/arm64/kvm/Kconfig +++ b/arch/arm64/kvm/Kconfig @@ -21,6 +21,8 @@ if VIRTUALIZATION config KVM bool "Kernel-based Virtual Machine (KVM) support" depends on OF + # for TASKSTATS/TASK_DELAY_ACCT: + depends on NET && MULTIUSER select MMU_NOTIFIER select PREEMPT_NOTIFIERS select HAVE_KVM_CPU_RELAX_INTERCEPT @@ -39,6 +41,8 @@ config KVM select IRQ_BYPASS_MANAGER select HAVE_KVM_IRQ_BYPASS select HAVE_KVM_VCPU_RUN_PID_CHANGE + select TASKSTATS + select TASK_DELAY_ACCT ---help--- Support hosting virtualized guest machines. We don't support KVM with 16K page tables yet, due to the multiple diff --git a/arch/arm64/kvm/Makefile b/arch/arm64/kvm/Makefile index 3ac1a64d2fb9..5ffbdc39e780 100644 --- a/arch/arm64/kvm/Makefile +++ b/arch/arm64/kvm/Makefile @@ -13,6 +13,8 @@ obj-$(CONFIG_KVM_ARM_HOST) += hyp/ kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o $(KVM)/eventfd.o $(KVM)/vfio.o kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/arm.o $(KVM)/arm/mmu.o $(KVM)/arm/mmio.o kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/psci.o $(KVM)/arm/perf.o +kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hypercalls.o +kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/pvtime.o kvm-$(CONFIG_KVM_ARM_HOST) += inject_fault.o regmap.o va_layout.o kvm-$(CONFIG_KVM_ARM_HOST) += hyp.o hyp-init.o handle_exit.o diff --git a/arch/arm64/kvm/guest.c b/arch/arm64/kvm/guest.c index dfd626447482..2fff06114a8f 100644 --- a/arch/arm64/kvm/guest.c +++ b/arch/arm64/kvm/guest.c @@ -34,6 +34,10 @@ #define VCPU_STAT(x) { #x, offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU } struct kvm_stats_debugfs_item debugfs_entries[] = { + VCPU_STAT(halt_successful_poll), + VCPU_STAT(halt_attempted_poll), + VCPU_STAT(halt_poll_invalid), + VCPU_STAT(halt_wakeup), VCPU_STAT(hvc_exit_stat), VCPU_STAT(wfe_exit_stat), VCPU_STAT(wfi_exit_stat), @@ -712,6 +716,12 @@ int __kvm_arm_vcpu_get_events(struct kvm_vcpu *vcpu, if (events->exception.serror_pending && events->exception.serror_has_esr) events->exception.serror_esr = vcpu_get_vsesr(vcpu); + /* + * We never return a pending ext_dabt here because we deliver it to + * the virtual CPU directly when setting the event and it's no longer + * 'pending' at this point. + */ + return 0; } @@ -720,6 +730,7 @@ int __kvm_arm_vcpu_set_events(struct kvm_vcpu *vcpu, { bool serror_pending = events->exception.serror_pending; bool has_esr = events->exception.serror_has_esr; + bool ext_dabt_pending = events->exception.ext_dabt_pending; if (serror_pending && has_esr) { if (!cpus_have_const_cap(ARM64_HAS_RAS_EXTN)) @@ -733,6 +744,9 @@ int __kvm_arm_vcpu_set_events(struct kvm_vcpu *vcpu, kvm_inject_vabt(vcpu); } + if (ext_dabt_pending) + kvm_inject_dabt(vcpu, kvm_vcpu_get_hfar(vcpu)); + return 0; } @@ -858,6 +872,9 @@ int kvm_arm_vcpu_arch_set_attr(struct kvm_vcpu *vcpu, case KVM_ARM_VCPU_TIMER_CTRL: ret = kvm_arm_timer_set_attr(vcpu, attr); break; + case KVM_ARM_VCPU_PVTIME_CTRL: + ret = kvm_arm_pvtime_set_attr(vcpu, attr); + break; default: ret = -ENXIO; break; @@ -878,6 +895,9 @@ int kvm_arm_vcpu_arch_get_attr(struct kvm_vcpu *vcpu, case KVM_ARM_VCPU_TIMER_CTRL: ret = kvm_arm_timer_get_attr(vcpu, attr); break; + case KVM_ARM_VCPU_PVTIME_CTRL: + ret = kvm_arm_pvtime_get_attr(vcpu, attr); + break; default: ret = -ENXIO; break; @@ -898,6 +918,9 @@ int kvm_arm_vcpu_arch_has_attr(struct kvm_vcpu *vcpu, case KVM_ARM_VCPU_TIMER_CTRL: ret = kvm_arm_timer_has_attr(vcpu, attr); break; + case KVM_ARM_VCPU_PVTIME_CTRL: + ret = kvm_arm_pvtime_has_attr(vcpu, attr); + break; default: ret = -ENXIO; break; diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c index 706cca23f0d2..aacfc55de44c 100644 --- a/arch/arm64/kvm/handle_exit.c +++ b/arch/arm64/kvm/handle_exit.c @@ -11,8 +11,6 @@ #include <linux/kvm.h> #include <linux/kvm_host.h> -#include <kvm/arm_psci.h> - #include <asm/esr.h> #include <asm/exception.h> #include <asm/kvm_asm.h> @@ -22,6 +20,8 @@ #include <asm/debug-monitors.h> #include <asm/traps.h> +#include <kvm/arm_hypercalls.h> + #define CREATE_TRACE_POINTS #include "trace.h" diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c index 3d3815020e36..72fbbd86eb5e 100644 --- a/arch/arm64/kvm/hyp/switch.c +++ b/arch/arm64/kvm/hyp/switch.c @@ -12,7 +12,7 @@ #include <kvm/arm_psci.h> -#include <asm/arch_gicv3.h> +#include <asm/barrier.h> #include <asm/cpufeature.h> #include <asm/kprobes.h> #include <asm/kvm_asm.h> @@ -118,12 +118,29 @@ static void __hyp_text __activate_traps_nvhe(struct kvm_vcpu *vcpu) } write_sysreg(val, cptr_el2); + + if (cpus_have_const_cap(ARM64_WORKAROUND_1319367)) { + struct kvm_cpu_context *ctxt = &vcpu->arch.ctxt; + + isb(); + /* + * At this stage, and thanks to the above isb(), S2 is + * configured and enabled. We can now restore the guest's S1 + * configuration: SCTLR, and only then TCR. + */ + write_sysreg_el1(ctxt->sys_regs[SCTLR_EL1], SYS_SCTLR); + isb(); + write_sysreg_el1(ctxt->sys_regs[TCR_EL1], SYS_TCR); + } } static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu) { u64 hcr = vcpu->arch.hcr_el2; + if (cpus_have_const_cap(ARM64_WORKAROUND_CAVIUM_TX2_219_TVM)) + hcr |= HCR_TVM; + write_sysreg(hcr, hcr_el2); if (cpus_have_const_cap(ARM64_HAS_RAS_EXTN) && (hcr & HCR_VSE)) @@ -156,6 +173,23 @@ static void __hyp_text __deactivate_traps_nvhe(void) { u64 mdcr_el2 = read_sysreg(mdcr_el2); + if (cpus_have_const_cap(ARM64_WORKAROUND_1319367)) { + u64 val; + + /* + * Set the TCR and SCTLR registers in the exact opposite + * sequence as __activate_traps_nvhe (first prevent walks, + * then force the MMU on). A generous sprinkling of isb() + * ensure that things happen in this exact order. + */ + val = read_sysreg_el1(SYS_TCR); + write_sysreg_el1(val | TCR_EPD1_MASK | TCR_EPD0_MASK, SYS_TCR); + isb(); + val = read_sysreg_el1(SYS_SCTLR); + write_sysreg_el1(val | SCTLR_ELx_M, SYS_SCTLR); + isb(); + } + __deactivate_traps_common(); mdcr_el2 &= MDCR_EL2_HPMN_MASK; @@ -174,8 +208,10 @@ static void __hyp_text __deactivate_traps(struct kvm_vcpu *vcpu) * the crucial bit is "On taking a vSError interrupt, * HCR_EL2.VSE is cleared to 0." */ - if (vcpu->arch.hcr_el2 & HCR_VSE) - vcpu->arch.hcr_el2 = read_sysreg(hcr_el2); + if (vcpu->arch.hcr_el2 & HCR_VSE) { + vcpu->arch.hcr_el2 &= ~HCR_VSE; + vcpu->arch.hcr_el2 |= read_sysreg(hcr_el2) & HCR_VSE; + } if (has_vhe()) deactivate_traps_vhe(); @@ -380,6 +416,61 @@ static bool __hyp_text __hyp_handle_fpsimd(struct kvm_vcpu *vcpu) return true; } +static bool __hyp_text handle_tx2_tvm(struct kvm_vcpu *vcpu) +{ + u32 sysreg = esr_sys64_to_sysreg(kvm_vcpu_get_hsr(vcpu)); + int rt = kvm_vcpu_sys_get_rt(vcpu); + u64 val = vcpu_get_reg(vcpu, rt); + + /* + * The normal sysreg handling code expects to see the traps, + * let's not do anything here. + */ + if (vcpu->arch.hcr_el2 & HCR_TVM) + return false; + + switch (sysreg) { + case SYS_SCTLR_EL1: + write_sysreg_el1(val, SYS_SCTLR); + break; + case SYS_TTBR0_EL1: + write_sysreg_el1(val, SYS_TTBR0); + break; + case SYS_TTBR1_EL1: + write_sysreg_el1(val, SYS_TTBR1); + break; + case SYS_TCR_EL1: + write_sysreg_el1(val, SYS_TCR); + break; + case SYS_ESR_EL1: + write_sysreg_el1(val, SYS_ESR); + break; + case SYS_FAR_EL1: + write_sysreg_el1(val, SYS_FAR); + break; + case SYS_AFSR0_EL1: + write_sysreg_el1(val, SYS_AFSR0); + break; + case SYS_AFSR1_EL1: + write_sysreg_el1(val, SYS_AFSR1); + break; + case SYS_MAIR_EL1: + write_sysreg_el1(val, SYS_MAIR); + break; + case SYS_AMAIR_EL1: + write_sysreg_el1(val, SYS_AMAIR); + break; + case SYS_CONTEXTIDR_EL1: + write_sysreg_el1(val, SYS_CONTEXTIDR); + break; + default: + return false; + } + + __kvm_skip_instr(vcpu); + return true; +} + /* * Return true when we were able to fixup the guest exit and should return to * the guest, false when we should restore the host state and return to the @@ -399,6 +490,11 @@ static bool __hyp_text fixup_guest_exit(struct kvm_vcpu *vcpu, u64 *exit_code) if (*exit_code != ARM_EXCEPTION_TRAP) goto exit; + if (cpus_have_const_cap(ARM64_WORKAROUND_CAVIUM_TX2_219_TVM) && + kvm_vcpu_trap_get_class(vcpu) == ESR_ELx_EC_SYS64 && + handle_tx2_tvm(vcpu)) + return true; + /* * We trap the first access to the FP/SIMD to save the host context * and restore the guest context lazily. @@ -592,7 +688,7 @@ int __hyp_text __kvm_vcpu_run_nvhe(struct kvm_vcpu *vcpu) */ if (system_uses_irq_prio_masking()) { gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET); - dsb(sy); + pmr_sync(); } vcpu = kern_hyp_va(vcpu); @@ -605,18 +701,23 @@ int __hyp_text __kvm_vcpu_run_nvhe(struct kvm_vcpu *vcpu) __sysreg_save_state_nvhe(host_ctxt); - __activate_vm(kern_hyp_va(vcpu->kvm)); - __activate_traps(vcpu); - - __hyp_vgic_restore_state(vcpu); - __timer_enable_traps(vcpu); - /* * We must restore the 32-bit state before the sysregs, thanks * to erratum #852523 (Cortex-A57) or #853709 (Cortex-A72). + * + * Also, and in order to be able to deal with erratum #1319537 (A57) + * and #1319367 (A72), we must ensure that all VM-related sysreg are + * restored before we enable S2 translation. */ __sysreg32_restore_state(vcpu); __sysreg_restore_state_nvhe(guest_ctxt); + + __activate_vm(kern_hyp_va(vcpu->kvm)); + __activate_traps(vcpu); + + __hyp_vgic_restore_state(vcpu); + __timer_enable_traps(vcpu); + __debug_switch_to_guest(vcpu); __set_guest_arch_workaround_state(vcpu); diff --git a/arch/arm64/kvm/hyp/sysreg-sr.c b/arch/arm64/kvm/hyp/sysreg-sr.c index 7ddbc849b580..22b8128d19f6 100644 --- a/arch/arm64/kvm/hyp/sysreg-sr.c +++ b/arch/arm64/kvm/hyp/sysreg-sr.c @@ -117,12 +117,26 @@ static void __hyp_text __sysreg_restore_el1_state(struct kvm_cpu_context *ctxt) { write_sysreg(ctxt->sys_regs[MPIDR_EL1], vmpidr_el2); write_sysreg(ctxt->sys_regs[CSSELR_EL1], csselr_el1); - write_sysreg_el1(ctxt->sys_regs[SCTLR_EL1], SYS_SCTLR); + + if (!cpus_have_const_cap(ARM64_WORKAROUND_1319367)) { + write_sysreg_el1(ctxt->sys_regs[SCTLR_EL1], SYS_SCTLR); + write_sysreg_el1(ctxt->sys_regs[TCR_EL1], SYS_TCR); + } else if (!ctxt->__hyp_running_vcpu) { + /* + * Must only be done for guest registers, hence the context + * test. We're coming from the host, so SCTLR.M is already + * set. Pairs with __activate_traps_nvhe(). + */ + write_sysreg_el1((ctxt->sys_regs[TCR_EL1] | + TCR_EPD1_MASK | TCR_EPD0_MASK), + SYS_TCR); + isb(); + } + write_sysreg(ctxt->sys_regs[ACTLR_EL1], actlr_el1); write_sysreg_el1(ctxt->sys_regs[CPACR_EL1], SYS_CPACR); write_sysreg_el1(ctxt->sys_regs[TTBR0_EL1], SYS_TTBR0); write_sysreg_el1(ctxt->sys_regs[TTBR1_EL1], SYS_TTBR1); - write_sysreg_el1(ctxt->sys_regs[TCR_EL1], SYS_TCR); write_sysreg_el1(ctxt->sys_regs[ESR_EL1], SYS_ESR); write_sysreg_el1(ctxt->sys_regs[AFSR0_EL1], SYS_AFSR0); write_sysreg_el1(ctxt->sys_regs[AFSR1_EL1], SYS_AFSR1); @@ -135,6 +149,23 @@ static void __hyp_text __sysreg_restore_el1_state(struct kvm_cpu_context *ctxt) write_sysreg(ctxt->sys_regs[PAR_EL1], par_el1); write_sysreg(ctxt->sys_regs[TPIDR_EL1], tpidr_el1); + if (cpus_have_const_cap(ARM64_WORKAROUND_1319367) && + ctxt->__hyp_running_vcpu) { + /* + * Must only be done for host registers, hence the context + * test. Pairs with __deactivate_traps_nvhe(). + */ + isb(); + /* + * At this stage, and thanks to the above isb(), S2 is + * deconfigured and disabled. We can now restore the host's + * S1 configuration: SCTLR, and only then TCR. + */ + write_sysreg_el1(ctxt->sys_regs[SCTLR_EL1], SYS_SCTLR); + isb(); + write_sysreg_el1(ctxt->sys_regs[TCR_EL1], SYS_TCR); + } + write_sysreg(ctxt->gp_regs.sp_el1, sp_el1); write_sysreg_el1(ctxt->gp_regs.elr_el1, SYS_ELR); write_sysreg_el1(ctxt->gp_regs.spsr[KVM_SPSR_EL1],SYS_SPSR); diff --git a/arch/arm64/kvm/hyp/tlb.c b/arch/arm64/kvm/hyp/tlb.c index eb0efc5557f3..c2bc17ca6430 100644 --- a/arch/arm64/kvm/hyp/tlb.c +++ b/arch/arm64/kvm/hyp/tlb.c @@ -63,6 +63,22 @@ static void __hyp_text __tlb_switch_to_guest_vhe(struct kvm *kvm, static void __hyp_text __tlb_switch_to_guest_nvhe(struct kvm *kvm, struct tlb_inv_context *cxt) { + if (cpus_have_const_cap(ARM64_WORKAROUND_1319367)) { + u64 val; + + /* + * For CPUs that are affected by ARM 1319367, we need to + * avoid a host Stage-1 walk while we have the guest's + * VMID set in the VTTBR in order to invalidate TLBs. + * We're guaranteed that the S1 MMU is enabled, so we can + * simply set the EPD bits to avoid any further TLB fill. + */ + val = cxt->tcr = read_sysreg_el1(SYS_TCR); + val |= TCR_EPD1_MASK | TCR_EPD0_MASK; + write_sysreg_el1(val, SYS_TCR); + isb(); + } + __load_guest_stage2(kvm); isb(); } @@ -100,6 +116,13 @@ static void __hyp_text __tlb_switch_to_host_nvhe(struct kvm *kvm, struct tlb_inv_context *cxt) { write_sysreg(0, vttbr_el2); + + if (cpus_have_const_cap(ARM64_WORKAROUND_1319367)) { + /* Ensure write of the host VMID */ + isb(); + /* Restore the host's TCR_EL1 */ + write_sysreg_el1(cxt->tcr, SYS_TCR); + } } static void __hyp_text __tlb_switch_to_host(struct kvm *kvm, diff --git a/arch/arm64/kvm/inject_fault.c b/arch/arm64/kvm/inject_fault.c index a9d25a305af5..ccdb6a051ab2 100644 --- a/arch/arm64/kvm/inject_fault.c +++ b/arch/arm64/kvm/inject_fault.c @@ -109,7 +109,7 @@ static void inject_undef64(struct kvm_vcpu *vcpu) /** * kvm_inject_dabt - inject a data abort into the guest - * @vcpu: The VCPU to receive the undefined exception + * @vcpu: The VCPU to receive the data abort * @addr: The address to report in the DFAR * * It is assumed that this code is called from the VCPU thread and that the @@ -125,7 +125,7 @@ void kvm_inject_dabt(struct kvm_vcpu *vcpu, unsigned long addr) /** * kvm_inject_pabt - inject a prefetch abort into the guest - * @vcpu: The VCPU to receive the undefined exception + * @vcpu: The VCPU to receive the prefetch abort * @addr: The address to report in the DFAR * * It is assumed that this code is called from the VCPU thread and that the diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c index 2071260a275b..46822afc57e0 100644 --- a/arch/arm64/kvm/sys_regs.c +++ b/arch/arm64/kvm/sys_regs.c @@ -632,6 +632,8 @@ static void reset_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r) */ val = ((pmcr & ~ARMV8_PMU_PMCR_MASK) | (ARMV8_PMU_PMCR_MASK & 0xdecafbad)) & (~ARMV8_PMU_PMCR_E); + if (!system_supports_32bit_el0()) + val |= ARMV8_PMU_PMCR_LC; __vcpu_sys_reg(vcpu, r->reg) = val; } @@ -682,6 +684,8 @@ static bool access_pmcr(struct kvm_vcpu *vcpu, struct sys_reg_params *p, val = __vcpu_sys_reg(vcpu, PMCR_EL0); val &= ~ARMV8_PMU_PMCR_MASK; val |= p->regval & ARMV8_PMU_PMCR_MASK; + if (!system_supports_32bit_el0()) + val |= ARMV8_PMU_PMCR_LC; __vcpu_sys_reg(vcpu, PMCR_EL0) = val; kvm_pmu_handle_pmcr(vcpu, val); kvm_vcpu_pmu_restore_guest(vcpu); diff --git a/arch/arm64/lib/clear_user.S b/arch/arm64/lib/clear_user.S index 10415572e82f..aeafc03e961a 100644 --- a/arch/arm64/lib/clear_user.S +++ b/arch/arm64/lib/clear_user.S @@ -20,7 +20,6 @@ * Alignment fixed up by hardware. */ ENTRY(__arch_clear_user) - uaccess_enable_not_uao x2, x3, x4 mov x2, x1 // save the size for fixup return subs x1, x1, #8 b.mi 2f @@ -40,7 +39,6 @@ uao_user_alternative 9f, strh, sttrh, wzr, x0, 2 b.mi 5f uao_user_alternative 9f, strb, sttrb, wzr, x0, 0 5: mov x0, #0 - uaccess_disable_not_uao x2, x3 ret ENDPROC(__arch_clear_user) EXPORT_SYMBOL(__arch_clear_user) diff --git a/arch/arm64/lib/copy_from_user.S b/arch/arm64/lib/copy_from_user.S index 680e74409ff9..ebb3c06cbb5d 100644 --- a/arch/arm64/lib/copy_from_user.S +++ b/arch/arm64/lib/copy_from_user.S @@ -54,10 +54,8 @@ end .req x5 ENTRY(__arch_copy_from_user) - uaccess_enable_not_uao x3, x4, x5 add end, x0, x2 #include "copy_template.S" - uaccess_disable_not_uao x3, x4 mov x0, #0 // Nothing to copy ret ENDPROC(__arch_copy_from_user) diff --git a/arch/arm64/lib/copy_in_user.S b/arch/arm64/lib/copy_in_user.S index 0bedae3f3792..3d8153a1ebce 100644 --- a/arch/arm64/lib/copy_in_user.S +++ b/arch/arm64/lib/copy_in_user.S @@ -56,10 +56,8 @@ end .req x5 ENTRY(__arch_copy_in_user) - uaccess_enable_not_uao x3, x4, x5 add end, x0, x2 #include "copy_template.S" - uaccess_disable_not_uao x3, x4 mov x0, #0 ret ENDPROC(__arch_copy_in_user) diff --git a/arch/arm64/lib/copy_to_user.S b/arch/arm64/lib/copy_to_user.S index 2d88c736e8f2..357eae2c18eb 100644 --- a/arch/arm64/lib/copy_to_user.S +++ b/arch/arm64/lib/copy_to_user.S @@ -53,10 +53,8 @@ end .req x5 ENTRY(__arch_copy_to_user) - uaccess_enable_not_uao x3, x4, x5 add end, x0, x2 #include "copy_template.S" - uaccess_disable_not_uao x3, x4 mov x0, #0 ret ENDPROC(__arch_copy_to_user) diff --git a/arch/arm64/lib/uaccess_flushcache.c b/arch/arm64/lib/uaccess_flushcache.c index cbfcbe6470a5..bfa30b75b2b8 100644 --- a/arch/arm64/lib/uaccess_flushcache.c +++ b/arch/arm64/lib/uaccess_flushcache.c @@ -28,7 +28,11 @@ void memcpy_page_flushcache(char *to, struct page *page, size_t offset, unsigned long __copy_user_flushcache(void *to, const void __user *from, unsigned long n) { - unsigned long rc = __arch_copy_from_user(to, from, n); + unsigned long rc; + + uaccess_enable_not_uao(); + rc = __arch_copy_from_user(to, from, n); + uaccess_disable_not_uao(); /* See above */ __clean_dcache_area_pop(to, n - rc); diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c index 9239416e93d4..6c45350e33aa 100644 --- a/arch/arm64/mm/dma-mapping.c +++ b/arch/arm64/mm/dma-mapping.c @@ -13,14 +13,14 @@ #include <asm/cacheflush.h> -void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_device(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { __dma_map_area(phys_to_virt(paddr), size, dir); } -void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { __dma_unmap_area(phys_to_virt(paddr), size, dir); } diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index 855f2a7954e6..077b02a2d4d3 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -32,7 +32,8 @@ #include <asm/daifflags.h> #include <asm/debug-monitors.h> #include <asm/esr.h> -#include <asm/kasan.h> +#include <asm/kprobes.h> +#include <asm/processor.h> #include <asm/sysreg.h> #include <asm/system_misc.h> #include <asm/pgtable.h> @@ -101,18 +102,6 @@ static void mem_abort_decode(unsigned int esr) data_abort_decode(esr); } -static inline bool is_ttbr0_addr(unsigned long addr) -{ - /* entry assembly clears tags for TTBR0 addrs */ - return addr < TASK_SIZE; -} - -static inline bool is_ttbr1_addr(unsigned long addr) -{ - /* TTBR1 addresses may have a tag if KASAN_SW_TAGS is in use */ - return arch_kasan_reset_tag(addr) >= PAGE_OFFSET; -} - static inline unsigned long mm_to_pgd_phys(struct mm_struct *mm) { /* Either init_pg_dir or swapper_pg_dir */ @@ -268,8 +257,12 @@ static bool __kprobes is_spurious_el1_translation_fault(unsigned long addr, par = read_sysreg(par_el1); local_irq_restore(flags); + /* + * If we now have a valid translation, treat the translation fault as + * spurious. + */ if (!(par & SYS_PAR_EL1_F)) - return false; + return true; /* * If we got a different type of fault from the AT instruction, @@ -314,6 +307,8 @@ static void __do_kernel_fault(unsigned long addr, unsigned int esr, if (is_el1_permission_fault(addr, esr, regs)) { if (esr & ESR_ELx_WNR) msg = "write to read-only memory"; + else if (is_el1_instruction_abort(esr)) + msg = "execute from non-executable memory"; else msg = "read from unreadable memory"; } else if (addr < PAGE_SIZE) { @@ -732,8 +727,7 @@ static const struct fault_info fault_info[] = { { do_bad, SIGKILL, SI_KERNEL, "unknown 63" }, }; -asmlinkage void __exception do_mem_abort(unsigned long addr, unsigned int esr, - struct pt_regs *regs) +void do_mem_abort(unsigned long addr, unsigned int esr, struct pt_regs *regs) { const struct fault_info *inf = esr_to_fault_info(esr); @@ -749,43 +743,21 @@ asmlinkage void __exception do_mem_abort(unsigned long addr, unsigned int esr, arm64_notify_die(inf->name, regs, inf->sig, inf->code, (void __user *)addr, esr); } +NOKPROBE_SYMBOL(do_mem_abort); -asmlinkage void __exception do_el0_irq_bp_hardening(void) +void do_el0_irq_bp_hardening(void) { /* PC has already been checked in entry.S */ arm64_apply_bp_hardening(); } +NOKPROBE_SYMBOL(do_el0_irq_bp_hardening); -asmlinkage void __exception do_el0_ia_bp_hardening(unsigned long addr, - unsigned int esr, - struct pt_regs *regs) -{ - /* - * We've taken an instruction abort from userspace and not yet - * re-enabled IRQs. If the address is a kernel address, apply - * BP hardening prior to enabling IRQs and pre-emption. - */ - if (!is_ttbr0_addr(addr)) - arm64_apply_bp_hardening(); - - local_daif_restore(DAIF_PROCCTX); - do_mem_abort(addr, esr, regs); -} - - -asmlinkage void __exception do_sp_pc_abort(unsigned long addr, - unsigned int esr, - struct pt_regs *regs) +void do_sp_pc_abort(unsigned long addr, unsigned int esr, struct pt_regs *regs) { - if (user_mode(regs)) { - if (!is_ttbr0_addr(instruction_pointer(regs))) - arm64_apply_bp_hardening(); - local_daif_restore(DAIF_PROCCTX); - } - arm64_notify_die("SP/PC alignment exception", regs, SIGBUS, BUS_ADRALN, (void __user *)addr, esr); } +NOKPROBE_SYMBOL(do_sp_pc_abort); int __init early_brk64(unsigned long addr, unsigned int esr, struct pt_regs *regs); @@ -868,8 +840,7 @@ NOKPROBE_SYMBOL(debug_exception_exit); #ifdef CONFIG_ARM64_ERRATUM_1463225 DECLARE_PER_CPU(int, __in_cortex_a76_erratum_1463225_wa); -static int __exception -cortex_a76_erratum_1463225_debug_handler(struct pt_regs *regs) +static int cortex_a76_erratum_1463225_debug_handler(struct pt_regs *regs) { if (user_mode(regs)) return 0; @@ -888,16 +859,15 @@ cortex_a76_erratum_1463225_debug_handler(struct pt_regs *regs) return 1; } #else -static int __exception -cortex_a76_erratum_1463225_debug_handler(struct pt_regs *regs) +static int cortex_a76_erratum_1463225_debug_handler(struct pt_regs *regs) { return 0; } #endif /* CONFIG_ARM64_ERRATUM_1463225 */ +NOKPROBE_SYMBOL(cortex_a76_erratum_1463225_debug_handler); -asmlinkage void __exception do_debug_exception(unsigned long addr_if_watchpoint, - unsigned int esr, - struct pt_regs *regs) +void do_debug_exception(unsigned long addr_if_watchpoint, unsigned int esr, + struct pt_regs *regs) { const struct fault_info *inf = esr_to_debug_fault_info(esr); unsigned long pc = instruction_pointer(regs); diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c index 45c00a54909c..be9481cdf3b9 100644 --- a/arch/arm64/mm/init.c +++ b/arch/arm64/mm/init.c @@ -20,6 +20,7 @@ #include <linux/sort.h> #include <linux/of.h> #include <linux/of_fdt.h> +#include <linux/dma-direct.h> #include <linux/dma-mapping.h> #include <linux/dma-contiguous.h> #include <linux/efi.h> @@ -41,6 +42,8 @@ #include <asm/tlb.h> #include <asm/alternative.h> +#define ARM64_ZONE_DMA_BITS 30 + /* * We need to be able to catch inadvertent references to memstart_addr * that occur (potentially in generic code) before arm64_memblock_init() @@ -56,7 +59,14 @@ EXPORT_SYMBOL(physvirt_offset); struct page *vmemmap __ro_after_init; EXPORT_SYMBOL(vmemmap); +/* + * We create both ZONE_DMA and ZONE_DMA32. ZONE_DMA covers the first 1G of + * memory as some devices, namely the Raspberry Pi 4, have peripherals with + * this limited view of the memory. ZONE_DMA32 will cover the rest of the 32 + * bit addressable memory area. + */ phys_addr_t arm64_dma_phys_limit __ro_after_init; +static phys_addr_t arm64_dma32_phys_limit __ro_after_init; #ifdef CONFIG_KEXEC_CORE /* @@ -81,7 +91,7 @@ static void __init reserve_crashkernel(void) if (crash_base == 0) { /* Current arm64 boot protocol requires 2MB alignment */ - crash_base = memblock_find_in_range(0, ARCH_LOW_ADDRESS_LIMIT, + crash_base = memblock_find_in_range(0, arm64_dma32_phys_limit, crash_size, SZ_2M); if (crash_base == 0) { pr_warn("cannot allocate crashkernel (size:0x%llx)\n", @@ -169,15 +179,16 @@ static void __init reserve_elfcorehdr(void) { } #endif /* CONFIG_CRASH_DUMP */ + /* - * Return the maximum physical address for ZONE_DMA32 (DMA_BIT_MASK(32)). It - * currently assumes that for memory starting above 4G, 32-bit devices will - * use a DMA offset. + * Return the maximum physical address for a zone with a given address size + * limit. It currently assumes that for memory starting above 4G, 32-bit + * devices will use a DMA offset. */ -static phys_addr_t __init max_zone_dma_phys(void) +static phys_addr_t __init max_zone_phys(unsigned int zone_bits) { - phys_addr_t offset = memblock_start_of_DRAM() & GENMASK_ULL(63, 32); - return min(offset + (1ULL << 32), memblock_end_of_DRAM()); + phys_addr_t offset = memblock_start_of_DRAM() & GENMASK_ULL(63, zone_bits); + return min(offset + (1ULL << zone_bits), memblock_end_of_DRAM()); } #ifdef CONFIG_NUMA @@ -186,8 +197,11 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max) { unsigned long max_zone_pfns[MAX_NR_ZONES] = {0}; +#ifdef CONFIG_ZONE_DMA + max_zone_pfns[ZONE_DMA] = PFN_DOWN(arm64_dma_phys_limit); +#endif #ifdef CONFIG_ZONE_DMA32 - max_zone_pfns[ZONE_DMA32] = PFN_DOWN(max_zone_dma_phys()); + max_zone_pfns[ZONE_DMA32] = PFN_DOWN(arm64_dma32_phys_limit); #endif max_zone_pfns[ZONE_NORMAL] = max; @@ -200,16 +214,21 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max) { struct memblock_region *reg; unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES]; - unsigned long max_dma = min; + unsigned long max_dma32 = min; + unsigned long __maybe_unused max_dma = min; memset(zone_size, 0, sizeof(zone_size)); - /* 4GB maximum for 32-bit only capable devices */ -#ifdef CONFIG_ZONE_DMA32 +#ifdef CONFIG_ZONE_DMA max_dma = PFN_DOWN(arm64_dma_phys_limit); - zone_size[ZONE_DMA32] = max_dma - min; + zone_size[ZONE_DMA] = max_dma - min; + max_dma32 = max_dma; +#endif +#ifdef CONFIG_ZONE_DMA32 + max_dma32 = PFN_DOWN(arm64_dma32_phys_limit); + zone_size[ZONE_DMA32] = max_dma32 - max_dma; #endif - zone_size[ZONE_NORMAL] = max - max_dma; + zone_size[ZONE_NORMAL] = max - max_dma32; memcpy(zhole_size, zone_size, sizeof(zhole_size)); @@ -219,16 +238,22 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max) if (start >= max) continue; - -#ifdef CONFIG_ZONE_DMA32 +#ifdef CONFIG_ZONE_DMA if (start < max_dma) { - unsigned long dma_end = min(end, max_dma); - zhole_size[ZONE_DMA32] -= dma_end - start; + unsigned long dma_end = min_not_zero(end, max_dma); + zhole_size[ZONE_DMA] -= dma_end - start; } #endif - if (end > max_dma) { +#ifdef CONFIG_ZONE_DMA32 + if (start < max_dma32) { + unsigned long dma32_end = min(end, max_dma32); + unsigned long dma32_start = max(start, max_dma); + zhole_size[ZONE_DMA32] -= dma32_end - dma32_start; + } +#endif + if (end > max_dma32) { unsigned long normal_end = min(end, max); - unsigned long normal_start = max(start, max_dma); + unsigned long normal_start = max(start, max_dma32); zhole_size[ZONE_NORMAL] -= normal_end - normal_start; } } @@ -418,11 +443,15 @@ void __init arm64_memblock_init(void) early_init_fdt_scan_reserved_mem(); - /* 4GB maximum for 32-bit only capable devices */ + if (IS_ENABLED(CONFIG_ZONE_DMA)) { + zone_dma_bits = ARM64_ZONE_DMA_BITS; + arm64_dma_phys_limit = max_zone_phys(ARM64_ZONE_DMA_BITS); + } + if (IS_ENABLED(CONFIG_ZONE_DMA32)) - arm64_dma_phys_limit = max_zone_dma_phys(); + arm64_dma32_phys_limit = max_zone_phys(32); else - arm64_dma_phys_limit = PHYS_MASK + 1; + arm64_dma32_phys_limit = PHYS_MASK + 1; reserve_crashkernel(); @@ -430,7 +459,7 @@ void __init arm64_memblock_init(void) high_memory = __va(memblock_end_of_DRAM() - 1) + 1; - dma_contiguous_reserve(arm64_dma_phys_limit); + dma_contiguous_reserve(arm64_dma32_phys_limit); } void __init bootmem_init(void) @@ -534,7 +563,7 @@ static void __init free_unused_memmap(void) void __init mem_init(void) { if (swiotlb_force == SWIOTLB_FORCE || - max_pfn > (arm64_dma_phys_limit >> PAGE_SHIFT)) + max_pfn > PFN_DOWN(arm64_dma_phys_limit ? : arm64_dma32_phys_limit)) swiotlb_init(1); else swiotlb_force = SWIOTLB_NO_FORCE; @@ -571,7 +600,7 @@ void free_initmem(void) { free_reserved_area(lm_alias(__init_begin), lm_alias(__init_end), - 0, "unused kernel"); + POISON_FREE_INITMEM, "unused kernel"); /* * Unmap the __init region but leave the VM area in place. This * prevents the region from being reused for kernel modules, which @@ -580,18 +609,6 @@ void free_initmem(void) unmap_kernel_range((u64)__init_begin, (u64)(__init_end - __init_begin)); } -#ifdef CONFIG_BLK_DEV_INITRD -void __init free_initrd_mem(unsigned long start, unsigned long end) -{ - unsigned long aligned_start, aligned_end; - - aligned_start = __virt_to_phys(start) & PAGE_MASK; - aligned_end = PAGE_ALIGN(__virt_to_phys(end)); - memblock_free(aligned_start, aligned_end - aligned_start); - free_reserved_area((void *)start, (void *)end, 0, "initrd"); -} -#endif - /* * Dump out memory limit information on panic. */ diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c index 60c929f3683b..5a3b15a14a7f 100644 --- a/arch/arm64/mm/mmu.c +++ b/arch/arm64/mm/mmu.c @@ -338,7 +338,7 @@ static void __create_pgd_mapping(pgd_t *pgdir, phys_addr_t phys, phys_addr_t (*pgtable_alloc)(int), int flags) { - unsigned long addr, length, end, next; + unsigned long addr, end, next; pgd_t *pgdp = pgd_offset_raw(pgdir, virt); /* @@ -350,9 +350,8 @@ static void __create_pgd_mapping(pgd_t *pgdir, phys_addr_t phys, phys &= PAGE_MASK; addr = virt & PAGE_MASK; - length = PAGE_ALIGN(size + (virt & ~PAGE_MASK)); + end = PAGE_ALIGN(virt + size); - end = addr + length; do { next = pgd_addr_end(addr, end); alloc_init_pud(pgdp, addr, next, phys, prot, pgtable_alloc, @@ -1061,6 +1060,8 @@ int arch_add_memory(int nid, u64 start, u64 size, __create_pgd_mapping(swapper_pg_dir, start, __phys_to_virt(start), size, PAGE_KERNEL, __pgd_pgtable_alloc, flags); + memblock_clear_nomap(start, size); + return __add_pages(nid, start >> PAGE_SHIFT, size >> PAGE_SHIFT, restrictions); } |