diff options
Diffstat (limited to 'arch/arm')
159 files changed, 3101 insertions, 2562 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5ebc5d922ea1..3146ed3f6eca 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1271,6 +1271,32 @@ config ARM_ERRATA_754327 This workaround defines cpu_relax() as smp_mb(), preventing correctly written polling loops from denying visibility of updates to memory. +config ARM_ERRATA_364296 + bool "ARM errata: Possible cache data corruption with hit-under-miss enabled" + depends on CPU_V6 && !SMP + help + This options enables the workaround for the 364296 ARM1136 + r0p2 erratum (possible cache data corruption with + hit-under-miss enabled). It sets the undocumented bit 31 in + the auxiliary control register and the FI bit in the control + register, thus disabling hit-under-miss without putting the + processor into full low interrupt latency mode. ARM11MPCore + is not affected. + +config ARM_ERRATA_764369 + bool "ARM errata: Data cache line maintenance operation by MVA may not succeed" + depends on CPU_V7 && SMP + help + This option enables the workaround for erratum 764369 + affecting Cortex-A9 MPCore with two or more processors (all + current revisions). Under certain timing circumstances, a data + cache line maintenance operation by MVA targeting an Inner + Shareable memory region may fail to proceed up to either the + Point of Coherency or to the Point of Unification of the + system. This workaround adds a DSB instruction before the + relevant cache maintenance functions and sets a specific bit + in the diagnostic control register of the SCU. + endmenu source "arch/arm/common/Kconfig" diff --git a/arch/arm/boot/compressed/mmcif-sh7372.c b/arch/arm/boot/compressed/mmcif-sh7372.c index b6f61d9a5a1b..672ae95db5c3 100644 --- a/arch/arm/boot/compressed/mmcif-sh7372.c +++ b/arch/arm/boot/compressed/mmcif-sh7372.c @@ -82,7 +82,7 @@ asmlinkage void mmc_loader(unsigned char *buf, unsigned long len) /* Disable clock to MMC hardware block */ - __raw_writel(__raw_readl(SMSTPCR3) & (1 << 12), SMSTPCR3); + __raw_writel(__raw_readl(SMSTPCR3) | (1 << 12), SMSTPCR3); mmc_update_progress(MMC_PROGRESS_DONE); } diff --git a/arch/arm/boot/compressed/sdhi-sh7372.c b/arch/arm/boot/compressed/sdhi-sh7372.c index d403a8b24d7f..d279294f2381 100644 --- a/arch/arm/boot/compressed/sdhi-sh7372.c +++ b/arch/arm/boot/compressed/sdhi-sh7372.c @@ -85,7 +85,7 @@ asmlinkage void mmc_loader(unsigned short *buf, unsigned long len) goto err; /* Disable clock to SDHI1 hardware block */ - __raw_writel(__raw_readl(SMSTPCR3) & (1 << 13), SMSTPCR3); + __raw_writel(__raw_readl(SMSTPCR3) | (1 << 13), SMSTPCR3); mmc_update_progress(MMC_PROGRESS_DONE); diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts index 4c053340ce33..e5818668d091 100644 --- a/arch/arm/boot/dts/tegra-harmony.dts +++ b/arch/arm/boot/dts/tegra-harmony.dts @@ -57,14 +57,14 @@ }; sdhci@c8000200 { - gpios = <&gpio 69 0>, /* cd, gpio PI5 */ - <&gpio 57 0>, /* wp, gpio PH1 */ - <&gpio 155 0>; /* power, gpio PT3 */ + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 155 0>; /* gpio PT3 */ }; sdhci@c8000600 { - gpios = <&gpio 58 0>, /* cd, gpio PH2 */ - <&gpio 59 0>, /* wp, gpio PH3 */ - <&gpio 70 0>; /* power, gpio PI6 */ + cd-gpios = <&gpio 58 0>; /* gpio PH2 */ + wp-gpios = <&gpio 59 0>; /* gpio PH3 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ }; }; diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts index 1940cae00748..64cedca6fc79 100644 --- a/arch/arm/boot/dts/tegra-seaboard.dts +++ b/arch/arm/boot/dts/tegra-seaboard.dts @@ -21,8 +21,8 @@ }; sdhci@c8000400 { - gpios = <&gpio 69 0>, /* cd, gpio PI5 */ - <&gpio 57 0>, /* wp, gpio PH1 */ - <&gpio 70 0>; /* power, gpio PI6 */ + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ }; }; diff --git a/arch/arm/include/asm/device.h b/arch/arm/include/asm/device.h index 9f390ce335cb..b5c9f5b1f6a3 100644 --- a/arch/arm/include/asm/device.h +++ b/arch/arm/include/asm/device.h @@ -12,7 +12,12 @@ struct dev_archdata { #endif }; +struct omap_device; + struct pdev_archdata { +#ifdef CONFIG_ARCH_OMAP + struct omap_device *od; +#endif }; #endif diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h index 8c73900da9ed..253cc86318bf 100644 --- a/arch/arm/include/asm/futex.h +++ b/arch/arm/include/asm/futex.h @@ -25,17 +25,17 @@ #ifdef CONFIG_SMP -#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ +#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \ smp_mb(); \ __asm__ __volatile__( \ - "1: ldrex %1, [%2]\n" \ + "1: ldrex %1, [%3]\n" \ " " insn "\n" \ - "2: strex %1, %0, [%2]\n" \ - " teq %1, #0\n" \ + "2: strex %2, %0, [%3]\n" \ + " teq %2, #0\n" \ " bne 1b\n" \ " mov %0, #0\n" \ - __futex_atomic_ex_table("%4") \ - : "=&r" (ret), "=&r" (oldval) \ + __futex_atomic_ex_table("%5") \ + : "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \ : "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \ : "cc", "memory") @@ -73,14 +73,14 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, #include <linux/preempt.h> #include <asm/domain.h> -#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ +#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \ __asm__ __volatile__( \ - "1: " T(ldr) " %1, [%2]\n" \ + "1: " T(ldr) " %1, [%3]\n" \ " " insn "\n" \ - "2: " T(str) " %0, [%2]\n" \ + "2: " T(str) " %0, [%3]\n" \ " mov %0, #0\n" \ - __futex_atomic_ex_table("%4") \ - : "=&r" (ret), "=&r" (oldval) \ + __futex_atomic_ex_table("%5") \ + : "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \ : "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \ : "cc", "memory") @@ -117,7 +117,7 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr) int cmp = (encoded_op >> 24) & 15; int oparg = (encoded_op << 8) >> 20; int cmparg = (encoded_op << 20) >> 20; - int oldval = 0, ret; + int oldval = 0, ret, tmp; if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) oparg = 1 << oparg; @@ -129,19 +129,19 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr) switch (op) { case FUTEX_OP_SET: - __futex_atomic_op("mov %0, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("mov %0, %4", ret, oldval, tmp, uaddr, oparg); break; case FUTEX_OP_ADD: - __futex_atomic_op("add %0, %1, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("add %0, %1, %4", ret, oldval, tmp, uaddr, oparg); break; case FUTEX_OP_OR: - __futex_atomic_op("orr %0, %1, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("orr %0, %1, %4", ret, oldval, tmp, uaddr, oparg); break; case FUTEX_OP_ANDN: - __futex_atomic_op("and %0, %1, %3", ret, oldval, uaddr, ~oparg); + __futex_atomic_op("and %0, %1, %4", ret, oldval, tmp, uaddr, ~oparg); break; case FUTEX_OP_XOR: - __futex_atomic_op("eor %0, %1, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("eor %0, %1, %4", ret, oldval, tmp, uaddr, oparg); break; default: ret = -ENOSYS; diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 16bd48031583..99a6ed7e1bfd 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -45,8 +45,13 @@ #define L2X0_CLEAN_INV_LINE_PA 0x7F0 #define L2X0_CLEAN_INV_LINE_IDX 0x7F8 #define L2X0_CLEAN_INV_WAY 0x7FC -#define L2X0_LOCKDOWN_WAY_D 0x900 -#define L2X0_LOCKDOWN_WAY_I 0x904 +/* + * The lockdown registers repeat 8 times for L310, the L210 has only one + * D and one I lockdown register at 0x0900 and 0x0904. + */ +#define L2X0_LOCKDOWN_WAY_D_BASE 0x900 +#define L2X0_LOCKDOWN_WAY_I_BASE 0x904 +#define L2X0_LOCKDOWN_STRIDE 0x08 #define L2X0_TEST_OPERATION 0xF00 #define L2X0_LINE_DATA 0xF10 #define L2X0_LINE_TAG 0xF30 @@ -64,7 +69,7 @@ #define L2X0_AUX_CTRL_MASK 0xc0000fff #define L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT 16 #define L2X0_AUX_CTRL_WAY_SIZE_SHIFT 17 -#define L2X0_AUX_CTRL_WAY_SIZE_MASK (0x3 << 17) +#define L2X0_AUX_CTRL_WAY_SIZE_MASK (0x7 << 17) #define L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT 22 #define L2X0_AUX_CTRL_NS_LOCKDOWN_SHIFT 26 #define L2X0_AUX_CTRL_NS_INT_CTRL_SHIFT 27 diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index 67c70a31a1be..b7e82c4aced6 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -41,7 +41,7 @@ struct arm_pmu_platdata { * encoded error on failure. */ extern struct platform_device * -reserve_pmu(enum arm_pmu_type device); +reserve_pmu(enum arm_pmu_type type); /** * release_pmu() - Relinquish control of the performance counters @@ -62,26 +62,26 @@ release_pmu(enum arm_pmu_type type); * the actual hardware initialisation. */ extern int -init_pmu(enum arm_pmu_type device); +init_pmu(enum arm_pmu_type type); #else /* CONFIG_CPU_HAS_PMU */ #include <linux/err.h> static inline struct platform_device * -reserve_pmu(enum arm_pmu_type device) +reserve_pmu(enum arm_pmu_type type) { return ERR_PTR(-ENODEV); } static inline int -release_pmu(struct platform_device *pdev) +release_pmu(enum arm_pmu_type type) { return -ENODEV; } static inline int -init_pmu(enum arm_pmu_type device) +init_pmu(enum arm_pmu_type type) { return -ENODEV; } diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 2c04ed5efeb5..c60a2944f95b 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -478,8 +478,8 @@ /* * Unimplemented (or alternatively implemented) syscalls */ -#define __IGNORE_fadvise64_64 1 -#define __IGNORE_migrate_pages 1 +#define __IGNORE_fadvise64_64 +#define __IGNORE_migrate_pages #endif /* __KERNEL__ */ #endif /* __ASM_ARM_UNISTD_H */ diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c index 2b70709376c3..c53474fe84df 100644 --- a/arch/arm/kernel/pmu.c +++ b/arch/arm/kernel/pmu.c @@ -31,7 +31,7 @@ static int __devinit pmu_register(struct platform_device *pdev, { if (type < 0 || type >= ARM_NUM_PMU_DEVICES) { pr_warning("received registration request for unknown " - "device %d\n", type); + "PMU device type %d\n", type); return -EINVAL; } @@ -112,17 +112,17 @@ static int __init register_pmu_driver(void) device_initcall(register_pmu_driver); struct platform_device * -reserve_pmu(enum arm_pmu_type device) +reserve_pmu(enum arm_pmu_type type) { struct platform_device *pdev; - if (test_and_set_bit_lock(device, &pmu_lock)) { + if (test_and_set_bit_lock(type, &pmu_lock)) { pdev = ERR_PTR(-EBUSY); - } else if (pmu_devices[device] == NULL) { - clear_bit_unlock(device, &pmu_lock); + } else if (pmu_devices[type] == NULL) { + clear_bit_unlock(type, &pmu_lock); pdev = ERR_PTR(-ENODEV); } else { - pdev = pmu_devices[device]; + pdev = pmu_devices[type]; } return pdev; @@ -130,11 +130,11 @@ reserve_pmu(enum arm_pmu_type device) EXPORT_SYMBOL_GPL(reserve_pmu); int -release_pmu(enum arm_pmu_type device) +release_pmu(enum arm_pmu_type type) { - if (WARN_ON(!pmu_devices[device])) + if (WARN_ON(!pmu_devices[type])) return -EINVAL; - clear_bit_unlock(device, &pmu_lock); + clear_bit_unlock(type, &pmu_lock); return 0; } EXPORT_SYMBOL_GPL(release_pmu); @@ -182,17 +182,17 @@ init_cpu_pmu(void) } int -init_pmu(enum arm_pmu_type device) +init_pmu(enum arm_pmu_type type) { int err = 0; - switch (device) { + switch (type) { case ARM_PMU_DEVICE_CPU: err = init_cpu_pmu(); break; default: - pr_warning("attempt to initialise unknown device %d\n", - device); + pr_warning("attempt to initialise PMU of unknown " + "type %d\n", type); err = -EINVAL; } diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S index 9cf4cbf8f95b..d0cdedf4864d 100644 --- a/arch/arm/kernel/relocate_kernel.S +++ b/arch/arm/kernel/relocate_kernel.S @@ -57,7 +57,8 @@ relocate_new_kernel: mov r0,#0 ldr r1,kexec_mach_type ldr r2,kexec_boot_atags - mov pc,lr + ARM( mov pc, lr ) + THUMB( bx lr ) .align diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 70bca649e925..e514c76043b4 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -280,18 +280,19 @@ static void __init cacheid_init(void) if (arch >= CPU_ARCH_ARMv6) { if ((cachetype & (7 << 29)) == 4 << 29) { /* ARMv7 register format */ + arch = CPU_ARCH_ARMv7; cacheid = CACHEID_VIPT_NONALIASING; if ((cachetype & (3 << 14)) == 1 << 14) cacheid |= CACHEID_ASID_TAGGED; - else if (cpu_has_aliasing_icache(CPU_ARCH_ARMv7)) - cacheid |= CACHEID_VIPT_I_ALIASING; - } else if (cachetype & (1 << 23)) { - cacheid = CACHEID_VIPT_ALIASING; } else { - cacheid = CACHEID_VIPT_NONALIASING; - if (cpu_has_aliasing_icache(CPU_ARCH_ARMv6)) - cacheid |= CACHEID_VIPT_I_ALIASING; + arch = CPU_ARCH_ARMv6; + if (cachetype & (1 << 23)) + cacheid = CACHEID_VIPT_ALIASING; + else + cacheid = CACHEID_VIPT_NONALIASING; } + if (cpu_has_aliasing_icache(arch)) + cacheid |= CACHEID_VIPT_I_ALIASING; } else { cacheid = CACHEID_VIVT; } diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c index 79ed5e7f204a..7fcddb75c877 100644 --- a/arch/arm/kernel/smp_scu.c +++ b/arch/arm/kernel/smp_scu.c @@ -13,6 +13,7 @@ #include <asm/smp_scu.h> #include <asm/cacheflush.h> +#include <asm/cputype.h> #define SCU_CTRL 0x00 #define SCU_CONFIG 0x04 @@ -37,6 +38,15 @@ void __init scu_enable(void __iomem *scu_base) { u32 scu_ctrl; +#ifdef CONFIG_ARM_ERRATA_764369 + /* Cortex-A9 only */ + if ((read_cpuid(CPUID_ID) & 0xff0ffff0) == 0x410fc090) { + scu_ctrl = __raw_readl(scu_base + 0x30); + if (!(scu_ctrl & 1)) + __raw_writel(scu_ctrl | 0x1, scu_base + 0x30); + } +#endif + scu_ctrl = __raw_readl(scu_base + SCU_CTRL); /* already enabled? */ if (scu_ctrl & 1) diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 2c277d40cee6..01c186222f3b 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -137,8 +137,8 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk) clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk); clk->min_delta_ns = clockevent_delta2ns(0xf, clk); + clockevents_register_device(clk); + /* Make sure our local interrupt controller has this enabled */ gic_enable_ppi(clk->irq); - - clockevents_register_device(clk); } diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index bf977f8514f6..4e66f62b8d41 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -23,8 +23,10 @@ #if defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK) #define ARM_EXIT_KEEP(x) x +#define ARM_EXIT_DISCARD(x) #else #define ARM_EXIT_KEEP(x) +#define ARM_EXIT_DISCARD(x) x #endif OUTPUT_ARCH(arm) @@ -39,6 +41,11 @@ jiffies = jiffies_64 + 4; SECTIONS { /* + * XXX: The linker does not define how output sections are + * assigned to input sections when there are multiple statements + * matching the same input section name. There is no documented + * order of matching. + * * unwind exit sections must be discarded before the rest of the * unwind sections get included. */ @@ -47,6 +54,9 @@ SECTIONS *(.ARM.extab.exit.text) ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text)) ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text)) + ARM_EXIT_DISCARD(EXIT_TEXT) + ARM_EXIT_DISCARD(EXIT_DATA) + EXIT_CALL #ifndef CONFIG_HOTPLUG *(.ARM.exidx.devexit.text) *(.ARM.extab.devexit.text) @@ -58,6 +68,8 @@ SECTIONS #ifndef CONFIG_SMP_ON_UP *(.alt.smp.init) #endif + *(.discard) + *(.discard.*) } #ifdef CONFIG_XIP_KERNEL @@ -279,9 +291,6 @@ SECTIONS STABS_DEBUG .comment 0 : { *(.comment) } - - /* Default discards */ - DISCARDS } /* diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index d522b47e30b5..6c8e3b5f669f 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -157,7 +157,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), - CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), diff --git a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S index 6bd83ed90afe..d87bfc397d39 100644 --- a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S +++ b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S @@ -8,7 +8,6 @@ * published by the Free Software Foundation. */ -#include <mach/hardware.h> #include <asm/hardware/entry-macro-gic.S> .macro disable_fiq diff --git a/arch/arm/mach-cns3xxx/include/mach/system.h b/arch/arm/mach-cns3xxx/include/mach/system.h index 58bb03ae3cf4..4f16c9b79f78 100644 --- a/arch/arm/mach-cns3xxx/include/mach/system.h +++ b/arch/arm/mach-cns3xxx/include/mach/system.h @@ -13,7 +13,6 @@ #include <linux/io.h> #include <asm/proc-fns.h> -#include <mach/hardware.h> static inline void arch_idle(void) { diff --git a/arch/arm/mach-cns3xxx/include/mach/uncompress.h b/arch/arm/mach-cns3xxx/include/mach/uncompress.h index de8ead9b91f7..a91b6058ab4f 100644 --- a/arch/arm/mach-cns3xxx/include/mach/uncompress.h +++ b/arch/arm/mach-cns3xxx/include/mach/uncompress.h @@ -8,7 +8,6 @@ */ #include <asm/mach-types.h> -#include <mach/hardware.h> #include <mach/cns3xxx.h> #define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00)) diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c index 06fd25d70aec..0f8fca48a5ed 100644 --- a/arch/arm/mach-cns3xxx/pcie.c +++ b/arch/arm/mach-cns3xxx/pcie.c @@ -49,7 +49,7 @@ static struct cns3xxx_pcie *sysdata_to_cnspci(void *sysdata) return &cns3xxx_pcie[root->domain]; } -static struct cns3xxx_pcie *pdev_to_cnspci(struct pci_dev *dev) +static struct cns3xxx_pcie *pdev_to_cnspci(const struct pci_dev *dev) { return sysdata_to_cnspci(dev->sysdata); } diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index bd5394537c88..008d51407cd7 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -115,6 +115,32 @@ static struct spi_board_info da850evm_spi_info[] = { }, }; +#ifdef CONFIG_MTD +static void da850_evm_m25p80_notify_add(struct mtd_info *mtd) +{ + char *mac_addr = davinci_soc_info.emac_pdata->mac_addr; + size_t retlen; + + if (!strcmp(mtd->name, "MAC-Address")) { + mtd->read(mtd, 0, ETH_ALEN, &retlen, mac_addr); + if (retlen == ETH_ALEN) + pr_info("Read MAC addr from SPI Flash: %pM\n", + mac_addr); + } +} + +static struct mtd_notifier da850evm_spi_notifier = { + .add = da850_evm_m25p80_notify_add, +}; + +static void da850_evm_setup_mac_addr(void) +{ + register_mtd_user(&da850evm_spi_notifier); +} +#else +static void da850_evm_setup_mac_addr(void) { } +#endif + static struct mtd_partition da850_evm_norflash_partition[] = { { .name = "bootloaders + env", @@ -1244,6 +1270,8 @@ static __init void da850_evm_init(void) if (ret) pr_warning("da850_evm_init: sata registration failed: %d\n", ret); + + da850_evm_setup_mac_addr(); } #ifdef CONFIG_SERIAL_8250_CONSOLE diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 47fd0bc3d3e7..fa59c097223d 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -243,7 +243,7 @@ #define PSC_STATE_DISABLE 2 #define PSC_STATE_ENABLE 3 -#define MDSTAT_STATE_MASK 0x1f +#define MDSTAT_STATE_MASK 0x3f #define MDCTL_FORCE BIT(31) #ifndef __ASSEMBLER__ diff --git a/arch/arm/mach-davinci/sleep.S b/arch/arm/mach-davinci/sleep.S index fb5e72b532b0..5f1e045a3ad1 100644 --- a/arch/arm/mach-davinci/sleep.S +++ b/arch/arm/mach-davinci/sleep.S @@ -217,7 +217,11 @@ ddr2clk_stop_done: ENDPROC(davinci_ddr_psc_config) CACHE_FLUSH: - .word arm926_flush_kern_cache_all +#ifdef CONFIG_CPU_V6 + .word v6_flush_kern_cache_all +#else + .word arm926_flush_kern_cache_all +#endif ENTRY(davinci_cpu_suspend_sz) .word . - davinci_cpu_suspend diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 83dce859886d..a9e0dae86a26 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -158,7 +158,7 @@ void __init dove_spi0_init(void) void __init dove_spi1_init(void) { - orion_spi_init(DOVE_SPI1_PHYS_BASE, get_tclk()); + orion_spi_1_init(DOVE_SPI1_PHYS_BASE, get_tclk()); } /***************************************************************************** diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h index 0eabec62cd9d..f1397a13e76b 100644 --- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h +++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h @@ -6,7 +6,7 @@ * TS72xx memory map: * * virt phys size - * febff000 22000000 4K model number register + * febff000 22000000 4K model number register (bits 0-2) * febfe000 22400000 4K options register * febfd000 22800000 4K options register #2 * febf9000 10800000 4K TS-5620 RTC index register @@ -20,6 +20,9 @@ #define TS72XX_MODEL_TS7200 0x00 #define TS72XX_MODEL_TS7250 0x01 #define TS72XX_MODEL_TS7260 0x02 +#define TS72XX_MODEL_TS7300 0x03 +#define TS72XX_MODEL_TS7400 0x04 +#define TS72XX_MODEL_MASK 0x07 #define TS72XX_OPTIONS_PHYS_BASE 0x22400000 @@ -51,19 +54,34 @@ #ifndef __ASSEMBLY__ +static inline int ts72xx_model(void) +{ + return __raw_readb(TS72XX_MODEL_VIRT_BASE) & TS72XX_MODEL_MASK; +} + static inline int board_is_ts7200(void) { - return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7200; + return ts72xx_model() == TS72XX_MODEL_TS7200; } static inline int board_is_ts7250(void) { - return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7250; + return ts72xx_model() == TS72XX_MODEL_TS7250; } static inline int board_is_ts7260(void) { - return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7260; + return ts72xx_model() == TS72XX_MODEL_TS7260; +} + +static inline int board_is_ts7300(void) +{ + return ts72xx_model() == TS72XX_MODEL_TS7300; +} + +static inline int board_is_ts7400(void) +{ + return ts72xx_model() == TS72XX_MODEL_TS7400; } static inline int is_max197_installed(void) diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c index 851dea018578..86964d2e9e1b 100644 --- a/arch/arm/mach-exynos4/clock.c +++ b/arch/arm/mach-exynos4/clock.c @@ -520,7 +520,7 @@ static struct clk init_clocks_off[] = { .ctrlbit = (1 << 21), }, { .name = "ac97", - .id = -1, + .devname = "samsung-ac97", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 27), }, { @@ -899,8 +899,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "exynos4-fimc.0", + .name = "sclk_cam0", .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 16), }, @@ -909,8 +908,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "exynos4-fimc.1", + .name = "sclk_cam1", .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 20), }, @@ -1160,7 +1158,7 @@ void __init_or_cpufreq exynos4_setup_clocks(void) vpllsrc = clk_get_rate(&clk_vpllsrc.clk); vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0), - __raw_readl(S5P_VPLL_CON1), pll_4650); + __raw_readl(S5P_VPLL_CON1), pll_4650c); clk_fout_apll.ops = &exynos4_fout_apll_ops; clk_fout_mpll.rate = mpll; diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c index 2d8a40c9e6e5..746d6fc6d397 100644 --- a/arch/arm/mach-exynos4/cpu.c +++ b/arch/arm/mach-exynos4/cpu.c @@ -24,12 +24,13 @@ #include <plat/exynos4.h> #include <plat/adc-core.h> #include <plat/sdhci.h> -#include <plat/devs.h> #include <plat/fb-core.h> #include <plat/fimc-core.h> #include <plat/iic-core.h> +#include <plat/reset.h> #include <mach/regs-irq.h> +#include <mach/regs-pmu.h> extern int combiner_init(unsigned int combiner_nr, void __iomem *base, unsigned int irq_start); @@ -128,6 +129,11 @@ static void exynos4_idle(void) local_irq_enable(); } +static void exynos4_sw_reset(void) +{ + __raw_writel(0x1, S5P_SWRESET); +} + /* * exynos4_map_io * @@ -241,5 +247,8 @@ int __init exynos4_init(void) /* set idle function */ pm_idle = exynos4_idle; + /* set sw_reset function */ + s5p_reset_hook = exynos4_sw_reset; + return sysdev_register(&exynos4_sysdev); } diff --git a/arch/arm/mach-exynos4/include/mach/irqs.h b/arch/arm/mach-exynos4/include/mach/irqs.h index 934d2a493982..f8952f8f3757 100644 --- a/arch/arm/mach-exynos4/include/mach/irqs.h +++ b/arch/arm/mach-exynos4/include/mach/irqs.h @@ -80,9 +80,8 @@ #define IRQ_HSMMC3 IRQ_SPI(76) #define IRQ_DWMCI IRQ_SPI(77) -#define IRQ_MIPICSI0 IRQ_SPI(78) - -#define IRQ_MIPICSI1 IRQ_SPI(80) +#define IRQ_MIPI_CSIS0 IRQ_SPI(78) +#define IRQ_MIPI_CSIS1 IRQ_SPI(80) #define IRQ_ONENAND_AUDI IRQ_SPI(82) #define IRQ_ROTATOR IRQ_SPI(83) diff --git a/arch/arm/mach-exynos4/include/mach/regs-pmu.h b/arch/arm/mach-exynos4/include/mach/regs-pmu.h index fa49bbb8e7b0..cdf9b47c303c 100644 --- a/arch/arm/mach-exynos4/include/mach/regs-pmu.h +++ b/arch/arm/mach-exynos4/include/mach/regs-pmu.h @@ -29,6 +29,8 @@ #define S5P_USE_STANDBY_WFE1 (1 << 25) #define S5P_USE_MASK ((0x3 << 16) | (0x3 << 24)) +#define S5P_SWRESET S5P_PMUREG(0x0400) + #define S5P_WAKEUP_STAT S5P_PMUREG(0x0600) #define S5P_EINT_WAKEUP_MASK S5P_PMUREG(0x0604) #define S5P_WAKEUP_MASK S5P_PMUREG(0x0608) diff --git a/arch/arm/mach-exynos4/irq-eint.c b/arch/arm/mach-exynos4/irq-eint.c index 9d87d2ac7f68..badb8c66fc9b 100644 --- a/arch/arm/mach-exynos4/irq-eint.c +++ b/arch/arm/mach-exynos4/irq-eint.c @@ -23,6 +23,8 @@ #include <mach/regs-gpio.h> +#include <asm/mach/irq.h> + static DEFINE_SPINLOCK(eint_lock); static unsigned int eint0_15_data[16]; @@ -184,8 +186,11 @@ static inline void exynos4_irq_demux_eint(unsigned int start) static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) { + struct irq_chip *chip = irq_get_chip(irq); + chained_irq_enter(chip, desc); exynos4_irq_demux_eint(IRQ_EINT(16)); exynos4_irq_demux_eint(IRQ_EINT(24)); + chained_irq_exit(chip, desc); } static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc) @@ -193,6 +198,7 @@ static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc) u32 *irq_data = irq_get_handler_data(irq); struct irq_chip *chip = irq_get_chip(irq); + chained_irq_enter(chip, desc); chip->irq_mask(&desc->irq_data); if (chip->irq_ack) @@ -201,6 +207,7 @@ static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc) generic_handle_irq(*irq_data); chip->irq_unmask(&desc->irq_data); + chained_irq_exit(chip, desc); } int __init exynos4_init_irq_eint(void) diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c b/arch/arm/mach-exynos4/mach-universal_c210.c index 0e280d12301e..b3b5d8911004 100644 --- a/arch/arm/mach-exynos4/mach-universal_c210.c +++ b/arch/arm/mach-exynos4/mach-universal_c210.c @@ -79,7 +79,7 @@ static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = { }; static struct regulator_consumer_supply max8952_consumer = - REGULATOR_SUPPLY("vddarm", NULL); + REGULATOR_SUPPLY("vdd_arm", NULL); static struct max8952_platform_data universal_max8952_pdata __initdata = { .gpio_vid0 = EXYNOS4_GPX0(3), @@ -105,7 +105,7 @@ static struct max8952_platform_data universal_max8952_pdata __initdata = { }; static struct regulator_consumer_supply lp3974_buck1_consumer = - REGULATOR_SUPPLY("vddint", NULL); + REGULATOR_SUPPLY("vdd_int", NULL); static struct regulator_consumer_supply lp3974_buck2_consumer = REGULATOR_SUPPLY("vddg3d", NULL); diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c index 1ae059b7ad7b..ddd86864fb83 100644 --- a/arch/arm/mach-exynos4/mct.c +++ b/arch/arm/mach-exynos4/mct.c @@ -132,12 +132,18 @@ static cycle_t exynos4_frc_read(struct clocksource *cs) return ((cycle_t)hi << 32) | lo; } +static void exynos4_frc_resume(struct clocksource *cs) +{ + exynos4_mct_frc_start(0, 0); +} + struct clocksource mct_frc = { .name = "mct-frc", .rating = 400, .read = exynos4_frc_read, .mask = CLOCKSOURCE_MASK(64), .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .resume = exynos4_frc_resume, }; static void __init exynos4_clocksource_init(void) @@ -389,9 +395,11 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt) } /* Setup the local clock events for a CPU */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) +int __cpuinit local_timer_setup(struct clock_event_device *evt) { exynos4_mct_tick_init(evt); + + return 0; } int local_timer_ack(void) diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c index 7c2282c6ba81..df6ef1b2f98b 100644 --- a/arch/arm/mach-exynos4/platsmp.c +++ b/arch/arm/mach-exynos4/platsmp.c @@ -106,6 +106,8 @@ void __cpuinit platform_secondary_init(unsigned int cpu) */ spin_lock(&boot_lock); spin_unlock(&boot_lock); + + set_cpu_online(cpu, true); } int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) diff --git a/arch/arm/mach-exynos4/setup-keypad.c b/arch/arm/mach-exynos4/setup-keypad.c index 1ee0ebff111f..7862bfb5933d 100644 --- a/arch/arm/mach-exynos4/setup-keypad.c +++ b/arch/arm/mach-exynos4/setup-keypad.c @@ -19,15 +19,16 @@ void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols) if (rows > 8) { /* Set all the necessary GPX2 pins: KP_ROW[0~7] */ - s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3)); + s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3), + S3C_GPIO_PULL_UP); /* Set all the necessary GPX3 pins: KP_ROW[8~] */ - s3c_gpio_cfgrange_nopull(EXYNOS4_GPX3(0), (rows - 8), - S3C_GPIO_SFN(3)); + s3c_gpio_cfgall_range(EXYNOS4_GPX3(0), (rows - 8), + S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); } else { /* Set all the necessary GPX2 pins: KP_ROW[x] */ - s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), rows, - S3C_GPIO_SFN(3)); + s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), rows, S3C_GPIO_SFN(3), + S3C_GPIO_PULL_UP); } /* Set all the necessary GPX1 pins to special-function 3: KP_COL[x] */ diff --git a/arch/arm/mach-exynos4/setup-usb-phy.c b/arch/arm/mach-exynos4/setup-usb-phy.c index 0883c1b824b9..39aca045f660 100644 --- a/arch/arm/mach-exynos4/setup-usb-phy.c +++ b/arch/arm/mach-exynos4/setup-usb-phy.c @@ -82,7 +82,7 @@ static int exynos4_usb_phy1_init(struct platform_device *pdev) rstcon &= ~(HOST_LINK_PORT_SWRST_MASK | PHY1_SWRST_MASK); writel(rstcon, EXYNOS4_RSTCON); - udelay(50); + udelay(80); clk_disable(otg_clk); clk_put(otg_clk); diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig index dc26fff22cf0..c8e7afcf14ec 100644 --- a/arch/arm/mach-footbridge/Kconfig +++ b/arch/arm/mach-footbridge/Kconfig @@ -62,6 +62,7 @@ config ARCH_EBSA285_HOST config ARCH_NETWINDER bool "NetWinder" select CLKSRC_I8253 + select CLKEVT_I8253 select FOOTBRIDGE_HOST select ISA select ISA_DMA diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index 1331fff51ae2..18c32a5541d9 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -18,6 +18,7 @@ #include <linux/irq.h> #include <linux/io.h> #include <linux/spinlock.h> +#include <video/vga.h> #include <asm/irq.h> #include <asm/system.h> diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index 87887ac5806b..f851fe903687 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -310,7 +310,7 @@ static struct sys_timer eukrea_cpuimx27_timer = { .init = eukrea_cpuimx27_timer_init, }; -MACHINE_START(CPUIMX27, "EUKREA CPUIMX27") +MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27") .boot_params = MX27_PHYS_OFFSET + 0x100, .map_io = mx27_map_io, .init_early = imx27_init_early, diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index f39a478ba1a6..4bd083ba9af2 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -192,7 +192,7 @@ struct sys_timer eukrea_cpuimx35_timer = { .init = eukrea_cpuimx35_timer_init, }; -MACHINE_START(EUKREA_CPUIMX35, "Eukrea CPUIMX35") +MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35") /* Maintainer: Eukrea Electromatique */ .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx35_map_io, diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c index da36da52969d..2442d5da883d 100644 --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c +++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c @@ -161,7 +161,7 @@ static struct sys_timer eukrea_cpuimx25_timer = { .init = eukrea_cpuimx25_timer_init, }; -MACHINE_START(EUKREA_CPUIMX25, "Eukrea CPUIMX25") +MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25") /* Maintainer: Eukrea Electromatique */ .boot_params = MX25_PHYS_OFFSET + 0x100, .map_io = mx25_map_io, diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 2fbbdd5eac35..8cdc730dcb3a 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -32,6 +32,7 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/mtd/physmap.h> +#include <video/vga.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -154,6 +155,7 @@ static struct map_desc ap_io_desc[] __initdata = { static void __init ap_map_io(void) { iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc)); + vga_base = PCI_MEMORY_VADDR; } #define INTEGRATOR_SC_VALID_INT 0x003fffff @@ -337,15 +339,15 @@ static unsigned long timer_reload; static void integrator_clocksource_init(u32 khz) { void __iomem *base = (void __iomem *)TIMER2_VA_BASE; - u32 ctrl = TIMER_CTRL_ENABLE; + u32 ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC; if (khz >= 1500) { khz /= 16; - ctrl = TIMER_CTRL_DIV16; + ctrl |= TIMER_CTRL_DIV16; } - writel(ctrl, base + TIMER_CTRL); writel(0xffff, base + TIMER_LOAD); + writel(ctrl, base + TIMER_CTRL); clocksource_mmio_init(base + TIMER_VALUE, "timer2", khz * 1000, 200, 16, clocksource_mmio_readl_down); diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index dd56bfb351e3..11b86e5b71c2 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -27,7 +27,6 @@ #include <linux/spinlock.h> #include <linux/init.h> #include <linux/io.h> -#include <video/vga.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -505,7 +504,6 @@ void __init pci_v3_preinit(void) pcibios_min_io = 0x6000; pcibios_min_mem = 0x00100000; - vga_base = PCI_MEMORY_VADDR; /* * Hook in our fault handler for PCI errors diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index ab7395d84bc8..91f9abbd3250 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -31,6 +31,7 @@ static int dsp_use; static struct clk *api_clk; static struct clk *dsp_clk; +static struct platform_device **omap_mcbsp_devices; static void omap1_mcbsp_request(unsigned int id) { @@ -78,6 +79,17 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = { .free = omap1_mcbsp_free, }; +#define OMAP7XX_MCBSP1_BASE 0xfffb1000 +#define OMAP7XX_MCBSP2_BASE 0xfffb1800 + +#define OMAP1510_MCBSP1_BASE 0xe1011800 +#define OMAP1510_MCBSP2_BASE 0xfffb1000 +#define OMAP1510_MCBSP3_BASE 0xe1017000 + +#define OMAP1610_MCBSP1_BASE 0xe1011800 +#define OMAP1610_MCBSP2_BASE 0xfffb1000 +#define OMAP1610_MCBSP3_BASE 0xe1017000 + #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) struct resource omap7xx_mcbsp_res[][6] = { { @@ -369,6 +381,39 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { #define OMAP16XX_MCBSP_COUNT 0 #endif +static void omap_mcbsp_register_board_cfg(struct resource *res, int res_count, + struct omap_mcbsp_platform_data *config, int size) +{ + int i; + + omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *), + GFP_KERNEL); + if (!omap_mcbsp_devices) { + printk(KERN_ERR "Could not register McBSP devices\n"); + return; + } + + for (i = 0; i < size; i++) { + struct platform_device *new_mcbsp; + int ret; + + new_mcbsp = platform_device_alloc("omap-mcbsp", i + 1); + if (!new_mcbsp) + continue; + platform_device_add_resources(new_mcbsp, &res[i * res_count], + res_count); + config[i].reg_size = 2; + config[i].reg_step = 2; + new_mcbsp->dev.platform_data = &config[i]; + ret = platform_device_add(new_mcbsp); + if (ret) { + platform_device_put(new_mcbsp); + continue; + } + omap_mcbsp_devices[i] = new_mcbsp; + } +} + static int __init omap1_mcbsp_init(void) { if (!cpu_class_is_omap1()) diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index cd45c045ab8c..512978586b2b 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -89,14 +89,13 @@ obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm2xxx_3xxx.o cminst44xx.o \ vp44xx_data.o # OMAP voltage domains -ifeq ($(CONFIG_PM),y) -voltagedomain-common := voltage.o -obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common) +voltagedomain-common := voltage.o vc.o vp.o +obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common) \ + voltagedomains2xxx_data.o obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common) \ voltagedomains3xxx_data.o obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common) \ voltagedomains44xx_data.o -endif # OMAP powerdomain framework powerdomain-common += powerdomain.o powerdomain-common.o diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 618216c8f742..d934169d6553 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -187,7 +187,8 @@ static int __init omap2430_i2c_init(void) { omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo, ARRAY_SIZE(sdp2430_i2c1_boardinfo)); - omap2_pmic_init("twl4030", &sdp2430_twldata); + omap_pmic_init(2, 100, "twl4030", INT_24XX_SYS_NIRQ, + &sdp2430_twldata); return 0; } @@ -243,17 +244,11 @@ static void __init omap_2430sdp_init(void) "Secondary LCD backlight"); } -static void __init omap_2430sdp_map_io(void) -{ - omap2_set_globals_243x(); - omap243x_map_common_io(); -} - MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board") /* Maintainer: Syed Khasim - Texas Instruments Inc */ .boot_params = 0x80000100, .reserve = omap_reserve, - .map_io = omap_2430sdp_map_io, + .map_io = omap243x_map_io, .init_early = omap2430_init_early, .init_irq = omap2_init_irq, .init_machine = omap_2430sdp_init, diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index ab19d305f61e..a97c29a73edd 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -129,7 +129,7 @@ static const int sdp4430_keymap[] = { KEY(7, 6, KEY_OK), KEY(7, 7, KEY_DOWN), }; -static struct omap_device_pad keypad_pads[] __initdata = { +static struct omap_device_pad keypad_pads[] = { { .name = "kpd_col1.kpd_col1", .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, }, @@ -825,17 +825,11 @@ static void __init omap_4430sdp_init(void) omap_4430sdp_display_init(); } -static void __init omap_4430sdp_map_io(void) -{ - omap2_set_globals_443x(); - omap44xx_map_common_io(); -} - MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board") /* Maintainer: Santosh Shilimkar - Texas Instruments Inc */ .boot_params = 0x80000100, .reserve = omap_reserve, - .map_io = omap_4430sdp_map_io, + .map_io = omap4_map_io, .init_early = omap4430_init_early, .init_irq = gic_init_irq, .init_machine = omap_4430sdp_init, diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index cf546f86014e..852843638fa9 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -337,17 +337,11 @@ static void __init omap_apollon_init(void) omap_sdrc_init(NULL, NULL); } -static void __init omap_apollon_map_io(void) -{ - omap2_set_globals_242x(); - omap242x_map_common_io(); -} - MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon") /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */ .boot_params = 0x80000100, .reserve = omap_reserve, - .map_io = omap_apollon_map_io, + .map_io = omap242x_map_io, .init_early = omap2420_init_early, .init_irq = omap2_init_irq, .init_machine = omap_apollon_init, diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 4b1f6c68c358..059b74dd9289 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -397,11 +397,6 @@ static struct platform_device keys_gpio = { }, }; -static void __init devkit8000_init_irq(void) -{ - omap3_init_irq(); -} - #define OMAP_DM9000_BASE 0x2c000000 static struct resource omap_dm9000_resources[] = { @@ -665,7 +660,7 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap35xx_init_early, - .init_irq = devkit8000_init_irq, + .init_irq = omap3_init_irq, .init_machine = devkit8000_init, .timer = &omap3_secure_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index aa1b0cbe19d2..30a6f527510c 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -148,11 +148,6 @@ __init board_nand_init(struct mtd_partition *nand_parts, board_nand_data.gpmc_irq = OMAP_GPMC_IRQ_BASE + cs; gpmc_nand_init(&board_nand_data); } -#else -void -__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs, int nand_type) -{ -} #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */ /** diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h index c240a3f8d163..d25503a98417 100644 --- a/arch/arm/mach-omap2/board-flash.h +++ b/arch/arm/mach-omap2/board-flash.h @@ -24,7 +24,26 @@ struct flash_partitions { int nr_parts; }; +#if defined(CONFIG_MTD_NAND_OMAP2) || \ + defined(CONFIG_MTD_NAND_OMAP2_MODULE) || \ + defined(CONFIG_MTD_ONENAND_OMAP2) || \ + defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) extern void board_flash_init(struct flash_partitions [], char chip_sel[][GPMC_CS_NUM], int nand_type); +#else +static inline void board_flash_init(struct flash_partitions part[], + char chip_sel[][GPMC_CS_NUM], int nand_type) +{ +} +#endif + +#if defined(CONFIG_MTD_NAND_OMAP2) || \ + defined(CONFIG_MTD_NAND_OMAP2_MODULE) extern void board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs, int nand_type); +#else +static inline void board_nand_init(struct mtd_partition *nand_parts, + u8 nr_parts, u8 cs, int nand_type) +{ +} +#endif diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 948fde010c69..8486142dcae7 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -290,11 +290,6 @@ static struct omap_board_config_kernel h4_config[] __initdata = { { OMAP_TAG_LCD, &h4_lcd_config }, }; -static void __init omap_h4_init_irq(void) -{ - omap2_init_irq(); -} - static struct at24_platform_data m24c01 = { .byte_len = SZ_1K / 8, .page_size = 16, @@ -369,19 +364,13 @@ static void __init omap_h4_init(void) h4_init_flash(); } -static void __init omap_h4_map_io(void) -{ - omap2_set_globals_242x(); - omap242x_map_common_io(); -} - MACHINE_START(OMAP_H4, "OMAP2420 H4 board") /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */ .boot_params = 0x80000100, .reserve = omap_reserve, - .map_io = omap_h4_map_io, + .map_io = omap242x_map_io, .init_early = omap2420_init_early, - .init_irq = omap_h4_init_irq, + .init_irq = omap2_init_irq, .init_machine = omap_h4_init, .timer = &omap2_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 77a4e19222e2..d1f4a0292c42 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -616,12 +616,6 @@ static struct i2c_board_info n810_i2c_board_info_2[] __initdata = { }, }; -static void __init n8x0_map_io(void) -{ - omap2_set_globals_242x(); - omap242x_map_common_io(); -} - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { /* I2S codec port pins for McBSP block */ @@ -692,7 +686,7 @@ static void __init n8x0_init_machine(void) MACHINE_START(NOKIA_N800, "Nokia N800") .boot_params = 0x80000100, .reserve = omap_reserve, - .map_io = n8x0_map_io, + .map_io = omap242x_map_io, .init_early = omap2420_init_early, .init_irq = omap2_init_irq, .init_machine = n8x0_init_machine, @@ -702,7 +696,7 @@ MACHINE_END MACHINE_START(NOKIA_N810, "Nokia N810") .boot_params = 0x80000100, .reserve = omap_reserve, - .map_io = n8x0_map_io, + .map_io = omap242x_map_io, .init_early = omap2420_init_early, .init_irq = omap2_init_irq, .init_machine = n8x0_init_machine, @@ -712,7 +706,7 @@ MACHINE_END MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") .boot_params = 0x80000100, .reserve = omap_reserve, - .map_io = n8x0_map_io, + .map_io = omap242x_map_io, .init_early = omap2420_init_early, .init_irq = omap2_init_irq, .init_machine = n8x0_init_machine, diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index ce3234d6a344..e085371eb494 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -449,11 +449,6 @@ static void __init omap3_beagle_init_early(void) omap2_init_common_infrastructure(); } -static void __init omap3_beagle_init_irq(void) -{ - omap3_init_irq(); -} - static struct platform_device *omap3_beagle_devices[] __initdata = { &leds_gpio, &keys_gpio, @@ -561,7 +556,7 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap3_beagle_init_early, - .init_irq = omap3_beagle_init_irq, + .init_irq = omap3_init_irq, .init_machine = omap3_beagle_init, .timer = &omap3_secure_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 807c27406792..fa58a0f1584a 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -428,11 +428,6 @@ static int __init omap3_stalker_i2c_init(void) static struct omap_board_config_kernel omap3_stalker_config[] __initdata = { }; -static void __init omap3_stalker_init_irq(void) -{ - omap3_init_irq(); -} - static struct platform_device *omap3_stalker_devices[] __initdata = { &keys_gpio, }; @@ -492,7 +487,7 @@ MACHINE_START(SBC3530, "OMAP3 STALKER") .boot_params = 0x80000100, .map_io = omap3_map_io, .init_early = omap35xx_init_early, - .init_irq = omap3_stalker_init_irq, + .init_irq = omap3_init_irq, .init_machine = omap3_stalker_init, .timer = &omap3_secure_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index f7f18092f36d..05488fbc20d5 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -326,11 +326,6 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static void __init omap3_touchbook_init_irq(void) -{ - omap3_init_irq(); -} - static struct platform_device *omap3_touchbook_devices[] __initdata = { &omap3_touchbook_lcd_device, &leds_gpio, @@ -403,7 +398,7 @@ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap3430_init_early, - .init_irq = omap3_touchbook_init_irq, + .init_irq = omap3_init_irq, .init_machine = omap3_touchbook_init, .timer = &omap3_secure_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 1bce76589784..e26929049a4d 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -570,17 +570,11 @@ static void __init omap4_panda_init(void) omap4_panda_display_init(); } -static void __init omap4_panda_map_io(void) -{ - omap2_set_globals_443x(); - omap44xx_map_common_io(); -} - MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board") /* Maintainer: David Anders - Texas Instruments Inc */ .boot_params = 0x80000100, .reserve = omap_reserve, - .map_io = omap4_panda_map_io, + .map_io = omap4_map_io, .init_early = omap4430_init_early, .init_irq = gic_init_irq, .init_machine = omap4_panda_init, diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index a3182e846b14..a98db616e0d4 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -143,16 +143,10 @@ static void __init rm680_init(void) rm680_peripherals_init(); } -static void __init rm680_map_io(void) -{ - omap2_set_globals_3xxx(); - omap34xx_map_common_io(); -} - MACHINE_START(NOKIA_RM680, "Nokia RM-680 board") .boot_params = 0x80000100, .reserve = omap_reserve, - .map_io = rm680_map_io, + .map_io = omap3_map_io, .init_early = omap3630_init_early, .init_irq = omap3_init_irq, .init_machine = rm680_init, diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 32a79e28379c..8677a06aa4a7 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -139,12 +139,6 @@ static void __init rx51_init(void) platform_device_register(&leds_gpio); } -static void __init rx51_map_io(void) -{ - omap2_set_globals_3xxx(); - omap34xx_map_common_io(); -} - static void __init rx51_reserve(void) { rx51_video_mem_init(); @@ -155,7 +149,7 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") /* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */ .boot_params = 0x80000100, .reserve = rx51_reserve, - .map_io = rx51_map_io, + .map_io = omap3_map_io, .init_early = omap3430_init_early, .init_irq = omap3_init_irq, .init_machine = rx51_init, diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c index 3f20cbb9967b..de61f15c48e2 100644 --- a/arch/arm/mach-omap2/common.c +++ b/arch/arm/mach-omap2/common.c @@ -56,6 +56,12 @@ void __init omap2_set_globals_242x(void) { __omap2_set_globals(&omap242x_globals); } + +void __init omap242x_map_io(void) +{ + omap2_set_globals_242x(); + omap242x_map_common_io(); +} #endif #if defined(CONFIG_SOC_OMAP2430) @@ -74,6 +80,12 @@ void __init omap2_set_globals_243x(void) { __omap2_set_globals(&omap243x_globals); } + +void __init omap243x_map_io(void) +{ + omap2_set_globals_243x(); + omap243x_map_common_io(); +} #endif #if defined(CONFIG_ARCH_OMAP3) @@ -138,5 +150,11 @@ void __init omap2_set_globals_443x(void) omap2_set_globals_control(&omap4_globals); omap2_set_globals_prcm(&omap4_globals); } + +void __init omap4_map_io(void) +{ + omap2_set_globals_443x(); + omap44xx_map_common_io(); +} #endif diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 1077ad663f93..10adf66be7ba 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -44,7 +44,7 @@ static int __init omap3_l3_init(void) { int l; struct omap_hwmod *oh; - struct omap_device *od; + struct platform_device *pdev; char oh_name[L3_MODULES_MAX_LEN]; /* @@ -61,12 +61,12 @@ static int __init omap3_l3_init(void) if (!oh) pr_err("could not look up %s\n", oh_name); - od = omap_device_build("omap_l3_smx", 0, oh, NULL, 0, + pdev = omap_device_build("omap_l3_smx", 0, oh, NULL, 0, NULL, 0, 0); - WARN(IS_ERR(od), "could not build omap_device for %s\n", oh_name); + WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name); - return IS_ERR(od) ? PTR_ERR(od) : 0; + return IS_ERR(pdev) ? PTR_ERR(pdev) : 0; } postcore_initcall(omap3_l3_init); @@ -74,7 +74,7 @@ static int __init omap4_l3_init(void) { int l, i; struct omap_hwmod *oh[3]; - struct omap_device *od; + struct platform_device *pdev; char oh_name[L3_MODULES_MAX_LEN]; /* @@ -92,12 +92,12 @@ static int __init omap4_l3_init(void) pr_err("could not look up %s\n", oh_name); } - od = omap_device_build_ss("omap_l3_noc", 0, oh, 3, NULL, + pdev = omap_device_build_ss("omap_l3_noc", 0, oh, 3, NULL, 0, NULL, 0, 0); - WARN(IS_ERR(od), "could not build omap_device for %s\n", oh_name); + WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name); - return IS_ERR(od) ? PTR_ERR(od) : 0; + return IS_ERR(pdev) ? PTR_ERR(pdev) : 0; } postcore_initcall(omap4_l3_init); @@ -232,7 +232,7 @@ struct omap_device_pm_latency omap_keyboard_latency[] = { int __init omap4_keyboard_init(struct omap4_keypad_platform_data *sdp4430_keypad_data, struct omap_board_data *bdata) { - struct omap_device *od; + struct platform_device *pdev; struct omap_hwmod *oh; struct omap4_keypad_platform_data *keypad_data; unsigned int id = -1; @@ -247,15 +247,15 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data keypad_data = sdp4430_keypad_data; - od = omap_device_build(name, id, oh, keypad_data, + pdev = omap_device_build(name, id, oh, keypad_data, sizeof(struct omap4_keypad_platform_data), omap_keyboard_latency, ARRAY_SIZE(omap_keyboard_latency), 0); - if (IS_ERR(od)) { + if (IS_ERR(pdev)) { WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name); - return PTR_ERR(od); + return PTR_ERR(pdev); } oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt); @@ -274,7 +274,7 @@ static struct omap_device_pm_latency mbox_latencies[] = { static inline void omap_init_mbox(void) { struct omap_hwmod *oh; - struct omap_device *od; + struct platform_device *pdev; oh = omap_hwmod_lookup("mailbox"); if (!oh) { @@ -282,10 +282,10 @@ static inline void omap_init_mbox(void) return; } - od = omap_device_build("omap-mailbox", -1, oh, NULL, 0, + pdev = omap_device_build("omap-mailbox", -1, oh, NULL, 0, mbox_latencies, ARRAY_SIZE(mbox_latencies), 0); - WARN(IS_ERR(od), "%s: could not build device, err %ld\n", - __func__, PTR_ERR(od)); + WARN(IS_ERR(pdev), "%s: could not build device, err %ld\n", + __func__, PTR_ERR(pdev)); } #else static inline void omap_init_mbox(void) { } @@ -344,7 +344,7 @@ struct omap_device_pm_latency omap_mcspi_latency[] = { static int omap_mcspi_init(struct omap_hwmod *oh, void *unused) { - struct omap_device *od; + struct platform_device *pdev; char *name = "omap2_mcspi"; struct omap2_mcspi_platform_config *pdata; static int spi_num; @@ -371,10 +371,10 @@ static int omap_mcspi_init(struct omap_hwmod *oh, void *unused) } spi_num++; - od = omap_device_build(name, spi_num, oh, pdata, + pdev = omap_device_build(name, spi_num, oh, pdata, sizeof(*pdata), omap_mcspi_latency, ARRAY_SIZE(omap_mcspi_latency), 0); - WARN(IS_ERR(od), "Can't build omap_device for %s:%s\n", + WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s\n", name, oh->name); kfree(pdata); return 0; @@ -709,7 +709,7 @@ static struct omap_device_pm_latency omap_wdt_latency[] = { static int __init omap_init_wdt(void) { int id = -1; - struct omap_device *od; + struct platform_device *pdev; struct omap_hwmod *oh; char *oh_name = "wd_timer2"; char *dev_name = "omap_wdt"; @@ -723,10 +723,10 @@ static int __init omap_init_wdt(void) return -EINVAL; } - od = omap_device_build(dev_name, id, oh, NULL, 0, + pdev = omap_device_build(dev_name, id, oh, NULL, 0, omap_wdt_latency, ARRAY_SIZE(omap_wdt_latency), 0); - WARN(IS_ERR(od), "Can't build omap_device for %s:%s.\n", + WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n", dev_name, oh->name); return 0; } diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index a5b7a236aa5b..18693f6de041 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -78,7 +78,7 @@ int __init omap_display_init(struct omap_dss_board_info *board_data) { int r = 0; struct omap_hwmod *oh; - struct omap_device *od; + struct platform_device *pdev; int i, oh_count; struct omap_display_platform_data pdata; const struct omap_dss_hwmod_data *curr_dss_hwmod; @@ -108,13 +108,13 @@ int __init omap_display_init(struct omap_dss_board_info *board_data) return -ENODEV; } - od = omap_device_build(curr_dss_hwmod[i].dev_name, + pdev = omap_device_build(curr_dss_hwmod[i].dev_name, curr_dss_hwmod[i].id, oh, &pdata, sizeof(struct omap_display_platform_data), omap_dss_latency, ARRAY_SIZE(omap_dss_latency), 0); - if (WARN((IS_ERR(od)), "Could not build omap_device for %s\n", + if (WARN((IS_ERR(pdev)), "Could not build omap_device for %s\n", curr_dss_hwmod[i].oh_name)) return -ENODEV; } diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index c9ff0e79703d..ae8cb3fb1830 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -228,7 +228,7 @@ static u32 configure_dma_errata(void) /* One time initializations */ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) { - struct omap_device *od; + struct platform_device *pdev; struct omap_system_dma_plat_info *p; struct resource *mem; char *name = "omap_dma_system"; @@ -258,23 +258,23 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) p->errata = configure_dma_errata(); - od = omap_device_build(name, 0, oh, p, sizeof(*p), + pdev = omap_device_build(name, 0, oh, p, sizeof(*p), omap2_dma_latency, ARRAY_SIZE(omap2_dma_latency), 0); kfree(p); - if (IS_ERR(od)) { + if (IS_ERR(pdev)) { pr_err("%s: Can't build omap_device for %s:%s.\n", __func__, name, oh->name); - return PTR_ERR(od); + return PTR_ERR(pdev); } - mem = platform_get_resource(&od->pdev, IORESOURCE_MEM, 0); + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!mem) { - dev_err(&od->pdev.dev, "%s: no mem resource\n", __func__); + dev_err(&pdev->dev, "%s: no mem resource\n", __func__); return -EINVAL; } dma_base = ioremap(mem->start, resource_size(mem)); if (!dma_base) { - dev_err(&od->pdev.dev, "%s: ioremap fail\n", __func__); + dev_err(&pdev->dev, "%s: ioremap fail\n", __func__); return -ENOMEM; } @@ -283,7 +283,7 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) (d->lch_count), GFP_KERNEL); if (!d->chan) { - dev_err(&od->pdev.dev, "%s: kzalloc fail\n", __func__); + dev_err(&pdev->dev, "%s: kzalloc fail\n", __func__); return -ENOMEM; } return 0; diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c index 2765cdc3152d..652ccc574196 100644 --- a/arch/arm/mach-omap2/gpio.c +++ b/arch/arm/mach-omap2/gpio.c @@ -34,7 +34,7 @@ static struct omap_device_pm_latency omap_gpio_latency[] = { static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) { - struct omap_device *od; + struct platform_device *pdev; struct omap_gpio_platform_data *pdata; struct omap_gpio_dev_attr *dev_attr; char *name = "omap_gpio"; @@ -107,19 +107,19 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) return -EINVAL; } - od = omap_device_build(name, id - 1, oh, pdata, + pdev = omap_device_build(name, id - 1, oh, pdata, sizeof(*pdata), omap_gpio_latency, ARRAY_SIZE(omap_gpio_latency), false); kfree(pdata); - if (IS_ERR(od)) { + if (IS_ERR(pdev)) { WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name); - return PTR_ERR(od); + return PTR_ERR(pdev); } - omap_device_disable_idle_on_suspend(od); + omap_device_disable_idle_on_suspend(pdev); gpio_bank_count++; return 0; diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index a9b45c76e1d3..2dc002a388b3 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -137,8 +137,7 @@ static void omap4_hsmmc1_before_set_reg(struct device *dev, int slot, */ reg = omap4_ctrl_pad_readl(control_pbias_offset); reg &= ~(OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | - OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + OMAP4_MMC1_PWRDNZ_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); } @@ -156,8 +155,7 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot, else reg |= OMAP4_MMC1_PBIASLITE_VMODE_MASK; reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | - OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + OMAP4_MMC1_PWRDNZ_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); timeout = jiffies + msecs_to_jiffies(5); @@ -171,16 +169,14 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot, if (reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK) { pr_err("Pbias Voltage is not same as LDO\n"); /* Caution : On VMODE_ERROR Power Down MMC IO */ - reg &= ~(OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + reg &= ~(OMAP4_MMC1_PWRDNZ_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); } } else { reg = omap4_ctrl_pad_readl(control_pbias_offset); reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_MMC1_PBIASLITE_VMODE_MASK | - OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + OMAP4_MMC1_PBIASLITE_VMODE_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); } } @@ -430,7 +426,7 @@ static struct omap_device_pm_latency omap_hsmmc_latency[] = { void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) { struct omap_hwmod *oh; - struct omap_device *od; + struct platform_device *pdev; struct omap_device_pm_latency *ohl; char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN]; struct omap_mmc_platform_data *mmc_data; @@ -471,9 +467,9 @@ void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) mmc_data->controller_flags = mmc_dev_attr->flags; } - od = omap_device_build(name, ctrl_nr - 1, oh, mmc_data, + pdev = omap_device_build(name, ctrl_nr - 1, oh, mmc_data, sizeof(struct omap_mmc_platform_data), ohl, ohl_cnt, false); - if (IS_ERR(od)) { + if (IS_ERR(pdev)) { WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name); kfree(mmc_data->slots[0].name); goto done; @@ -482,7 +478,7 @@ void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr) * return device handle to board setup code * required to populate for regulator framework structure */ - hsmmcinfo->dev = &od->pdev.dev; + hsmmcinfo->dev = &pdev->dev; done: kfree(mmc_data); diff --git a/arch/arm/mach-omap2/hwspinlock.c b/arch/arm/mach-omap2/hwspinlock.c index 06d4a80660a5..0b3ae9d9c3b3 100644 --- a/arch/arm/mach-omap2/hwspinlock.c +++ b/arch/arm/mach-omap2/hwspinlock.c @@ -35,7 +35,7 @@ int __init hwspinlocks_init(void) { int retval = 0; struct omap_hwmod *oh; - struct omap_device *od; + struct platform_device *pdev; const char *oh_name = "spinlock"; const char *dev_name = "omap_hwspinlock"; @@ -48,13 +48,13 @@ int __init hwspinlocks_init(void) if (oh == NULL) return -EINVAL; - od = omap_device_build(dev_name, 0, oh, NULL, 0, + pdev = omap_device_build(dev_name, 0, oh, NULL, 0, omap_spinlock_latency, ARRAY_SIZE(omap_spinlock_latency), false); - if (IS_ERR(od)) { + if (IS_ERR(pdev)) { pr_err("Can't build omap_device for %s:%s\n", dev_name, oh_name); - retval = PTR_ERR(od); + retval = PTR_ERR(pdev); } return retval; diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 1a13b7916554..15f91c42be66 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -38,6 +38,7 @@ #include "io.h" #include <plat/omap-pm.h> +#include "voltage.h" #include "powerdomain.h" #include "clockdomain.h" @@ -341,18 +342,22 @@ void __init omap2_init_common_infrastructure(void) u8 postsetup_state; if (cpu_is_omap242x()) { + omap2xxx_voltagedomains_init(); omap242x_powerdomains_init(); omap242x_clockdomains_init(); omap2420_hwmod_init(); } else if (cpu_is_omap243x()) { + omap2xxx_voltagedomains_init(); omap243x_powerdomains_init(); omap243x_clockdomains_init(); omap2430_hwmod_init(); } else if (cpu_is_omap34xx()) { + omap3xxx_voltagedomains_init(); omap3xxx_powerdomains_init(); omap3xxx_clockdomains_init(); omap3xxx_hwmod_init(); } else if (cpu_is_omap44xx()) { + omap44xx_voltagedomains_init(); omap44xx_powerdomains_init(); omap44xx_clockdomains_init(); omap44xx_hwmod_init(); diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 3a12f7586a4c..65f1be6a182c 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -165,8 +165,8 @@ static void __init omap_init_irq(u32 base, int nr_irqs) omap_irq_bank_init_one(bank); - for (i = 0, j = 0; i < bank->nr_irqs; i += 32, j += 0x20) - omap_alloc_gc(bank->base_reg + j, i, 32); + for (j = 0; j < bank->nr_irqs; j += 32) + omap_alloc_gc(bank->base_reg + j, j, 32); nr_of_irqs += bank->nr_irqs; nr_banks++; diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 4a6ef6ab8458..5063f253c4b9 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -27,66 +27,69 @@ #include "control.h" -/* McBSP internal signal muxing functions */ +/* + * FIXME: Find a mechanism to enable/disable runtime the McBSP ICLK autoidle. + * Sidetone needs non-gated ICLK and sidetone autoidle is broken. + */ +#include "cm2xxx_3xxx.h" +#include "cm-regbits-34xx.h" -void omap2_mcbsp1_mux_clkr_src(u8 mux) +/* McBSP internal signal muxing function */ +static int omap2_mcbsp1_mux_rx_clk(struct device *dev, const char *signal, + const char *src) { u32 v; v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - if (mux == CLKR_SRC_CLKR) - v &= ~OMAP2_MCBSP1_CLKR_MASK; - else if (mux == CLKR_SRC_CLKX) - v |= OMAP2_MCBSP1_CLKR_MASK; - omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0); -} -EXPORT_SYMBOL(omap2_mcbsp1_mux_clkr_src); -void omap2_mcbsp1_mux_fsr_src(u8 mux) -{ - u32 v; + if (!strcmp(signal, "clkr")) { + if (!strcmp(src, "clkr")) + v &= ~OMAP2_MCBSP1_CLKR_MASK; + else if (!strcmp(src, "clkx")) + v |= OMAP2_MCBSP1_CLKR_MASK; + else + return -EINVAL; + } else if (!strcmp(signal, "fsr")) { + if (!strcmp(src, "fsr")) + v &= ~OMAP2_MCBSP1_FSR_MASK; + else if (!strcmp(src, "fsx")) + v |= OMAP2_MCBSP1_FSR_MASK; + else + return -EINVAL; + } else { + return -EINVAL; + } - v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - if (mux == FSR_SRC_FSR) - v &= ~OMAP2_MCBSP1_FSR_MASK; - else if (mux == FSR_SRC_FSX) - v |= OMAP2_MCBSP1_FSR_MASK; omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0); + + return 0; } -EXPORT_SYMBOL(omap2_mcbsp1_mux_fsr_src); /* McBSP CLKS source switching function */ - -int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id) +static int omap2_mcbsp_set_clk_src(struct device *dev, struct clk *clk, + const char *src) { - struct omap_mcbsp *mcbsp; struct clk *fck_src; char *fck_src_name; int r; - if (!omap_mcbsp_check_valid_id(id)) { - pr_err("%s: Invalid id (%d)\n", __func__, id + 1); - return -EINVAL; - } - mcbsp = id_to_mcbsp_ptr(id); - - if (fck_src_id == MCBSP_CLKS_PAD_SRC) + if (!strcmp(src, "clks_ext")) fck_src_name = "pad_fck"; - else if (fck_src_id == MCBSP_CLKS_PRCM_SRC) + else if (!strcmp(src, "clks_fclk")) fck_src_name = "prcm_fck"; else return -EINVAL; - fck_src = clk_get(mcbsp->dev, fck_src_name); + fck_src = clk_get(dev, fck_src_name); if (IS_ERR_OR_NULL(fck_src)) { pr_err("omap-mcbsp: %s: could not clk_get() %s\n", "clks", fck_src_name); return -EINVAL; } - pm_runtime_put_sync(mcbsp->dev); + pm_runtime_put_sync(dev); - r = clk_set_parent(mcbsp->fclk, fck_src); + r = clk_set_parent(clk, fck_src); if (IS_ERR_VALUE(r)) { pr_err("omap-mcbsp: %s: could not clk_set_parent() to %s\n", "clks", fck_src_name); @@ -94,13 +97,30 @@ int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id) return -EINVAL; } - pm_runtime_get_sync(mcbsp->dev); + pm_runtime_get_sync(dev); clk_put(fck_src); return 0; } -EXPORT_SYMBOL(omap2_mcbsp_set_clks_src); + +static int omap3_enable_st_clock(unsigned int id, bool enable) +{ + unsigned int w; + + /* + * Sidetone uses McBSP ICLK - which must not idle when sidetones + * are enabled or sidetones start sounding ugly. + */ + w = omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE); + if (enable) + w &= ~(1 << (id - 2)); + else + w |= 1 << (id - 2); + omap2_cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE); + + return 0; +} struct omap_device_pm_latency omap2_mcbsp_latency[] = { { @@ -116,7 +136,7 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) char *name = "omap-mcbsp"; struct omap_hwmod *oh_device[2]; struct omap_mcbsp_platform_data *pdata = NULL; - struct omap_device *od; + struct platform_device *pdev; sscanf(oh->name, "mcbsp%d", &id); @@ -126,7 +146,13 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) return -ENOMEM; } - pdata->mcbsp_config_type = oh->class->rev; + pdata->reg_step = 4; + if (oh->class->rev < MCBSP_CONFIG_TYPE2) { + pdata->reg_size = 2; + } else { + pdata->reg_size = 4; + pdata->has_ccr = true; + } if (oh->class->rev == MCBSP_CONFIG_TYPE3) { if (id == 2) @@ -137,22 +163,29 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) pdata->buffer_size = 0x80; } + if (oh->class->rev >= MCBSP_CONFIG_TYPE3) + pdata->has_wakeup = true; + oh_device[0] = oh; if (oh->dev_attr) { oh_device[1] = omap_hwmod_lookup(( (struct omap_mcbsp_dev_attr *)(oh->dev_attr))->sidetone); + pdata->enable_st_clock = omap3_enable_st_clock; count++; } - od = omap_device_build_ss(name, id, oh_device, count, pdata, + pdev = omap_device_build_ss(name, id, oh_device, count, pdata, sizeof(*pdata), omap2_mcbsp_latency, ARRAY_SIZE(omap2_mcbsp_latency), false); kfree(pdata); - if (IS_ERR(od)) { + if (IS_ERR(pdev)) { pr_err("%s: Can't build omap_device for %s:%s.\n", __func__, name, oh->name); - return PTR_ERR(od); + return PTR_ERR(pdev); } + pdata->set_clk_src = omap2_mcbsp_set_clk_src; + if (id == 1) + pdata->mux_signal = omap2_mcbsp1_mux_rx_clk; omap_mcbsp_count++; return 0; } diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 2e4852d9574f..3008e1672c7a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -2569,7 +2569,7 @@ static struct omap_hwmod omap34xx_sr1_hwmod = { .name = "sr1_hwmod", .class = &omap34xx_smartreflex_hwmod_class, .main_clk = "sr1_fck", - .vdd_name = "mpu", + .vdd_name = "mpu_iva", .prcm = { .omap2 = { .prcm_reg_id = 1, @@ -2588,7 +2588,7 @@ static struct omap_hwmod omap36xx_sr1_hwmod = { .name = "sr1_hwmod", .class = &omap36xx_smartreflex_hwmod_class, .main_clk = "sr1_fck", - .vdd_name = "mpu", + .vdd_name = "mpu_iva", .prcm = { .omap2 = { .prcm_reg_id = 1, diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/arch/arm/mach-omap2/omap_l3_noc.c index 7b9f1909ddb2..07a3d3ede768 100644 --- a/arch/arm/mach-omap2/omap_l3_noc.c +++ b/arch/arm/mach-omap2/omap_l3_noc.c @@ -1,25 +1,25 @@ /* - * OMAP4XXX L3 Interconnect error handling driver - * - * Copyright (C) 2011 Texas Corporation - * Santosh Shilimkar <santosh.shilimkar@ti.com> - * Sricharan <r.sricharan@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ + * OMAP4XXX L3 Interconnect error handling driver + * + * Copyright (C) 2011 Texas Corporation + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * Sricharan <r.sricharan@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ #include <linux/init.h> #include <linux/io.h> #include <linux/platform_device.h> @@ -55,12 +55,12 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3) { - struct omap4_l3 *l3 = _l3; - int inttype, i, j; + struct omap4_l3 *l3 = _l3; + int inttype, i, k; int err_src = 0; - u32 std_err_main_addr, std_err_main, err_reg; - u32 base, slave_addr, clear; - char *source_name; + u32 std_err_main, err_reg, clear, masterid; + void __iomem *base, *l3_targ_base; + char *target_name, *master_name = "UN IDENTIFIED"; /* Get the Type of interrupt */ inttype = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR; @@ -70,43 +70,50 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3) * Read the regerr register of the clock domain * to determine the source */ - base = (u32)l3->l3_base[i]; - err_reg = readl(base + l3_flagmux[i] + (inttype << 3)); + base = l3->l3_base[i]; + err_reg = __raw_readl(base + l3_flagmux[i] + + + L3_FLAGMUX_REGERR0 + (inttype << 3)); /* Get the corresponding error and analyse */ if (err_reg) { /* Identify the source from control status register */ - for (j = 0; !(err_reg & (1 << j)); j++) - ; + err_src = __ffs(err_reg); - err_src = j; /* Read the stderrlog_main_source from clk domain */ - std_err_main_addr = base + *(l3_targ[i] + err_src); - std_err_main = readl(std_err_main_addr); + l3_targ_base = base + *(l3_targ[i] + err_src); + std_err_main = __raw_readl(l3_targ_base + + L3_TARG_STDERRLOG_MAIN); + masterid = __raw_readl(l3_targ_base + + L3_TARG_STDERRLOG_MSTADDR); switch (std_err_main & CUSTOM_ERROR) { case STANDARD_ERROR: - source_name = - l3_targ_stderrlog_main_name[i][err_src]; - - slave_addr = std_err_main_addr + - L3_SLAVE_ADDRESS_OFFSET; - WARN(true, "L3 standard error: SOURCE:%s at address 0x%x\n", - source_name, readl(slave_addr)); + target_name = + l3_targ_inst_name[i][err_src]; + WARN(true, "L3 standard error: TARGET:%s at address 0x%x\n", + target_name, + __raw_readl(l3_targ_base + + L3_TARG_STDERRLOG_SLVOFSLSB)); /* clear the std error log*/ clear = std_err_main | CLEAR_STDERR_LOG; - writel(clear, std_err_main_addr); + writel(clear, l3_targ_base + + L3_TARG_STDERRLOG_MAIN); break; case CUSTOM_ERROR: - source_name = - l3_targ_stderrlog_main_name[i][err_src]; - - WARN(true, "CUSTOM SRESP error with SOURCE:%s\n", - source_name); + target_name = + l3_targ_inst_name[i][err_src]; + for (k = 0; k < NUM_OF_L3_MASTERS; k++) { + if (masterid == l3_masters[k].id) + master_name = + l3_masters[k].name; + } + WARN(true, "L3 custom error: MASTER:%s TARGET:%s\n", + master_name, target_name); /* clear the std error log*/ clear = std_err_main | CLEAR_STDERR_LOG; - writel(clear, std_err_main_addr); + writel(clear, l3_targ_base + + L3_TARG_STDERRLOG_MAIN); break; default: @@ -122,10 +129,9 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3) static int __init omap4_l3_probe(struct platform_device *pdev) { - static struct omap4_l3 *l3; - struct resource *res; - int ret; - int irq; + static struct omap4_l3 *l3; + struct resource *res; + int ret; l3 = kzalloc(sizeof(*l3), GFP_KERNEL); if (!l3) @@ -177,27 +183,25 @@ static int __init omap4_l3_probe(struct platform_device *pdev) /* * Setup interrupt Handlers */ - irq = platform_get_irq(pdev, 0); - ret = request_irq(irq, + l3->debug_irq = platform_get_irq(pdev, 0); + ret = request_irq(l3->debug_irq, l3_interrupt_handler, IRQF_DISABLED, "l3-dbg-irq", l3); if (ret) { pr_crit("L3: request_irq failed to register for 0x%x\n", - OMAP44XX_IRQ_L3_DBG); + OMAP44XX_IRQ_L3_DBG); goto err3; } - l3->debug_irq = irq; - irq = platform_get_irq(pdev, 1); - ret = request_irq(irq, + l3->app_irq = platform_get_irq(pdev, 1); + ret = request_irq(l3->app_irq, l3_interrupt_handler, IRQF_DISABLED, "l3-app-irq", l3); if (ret) { pr_crit("L3: request_irq failed to register for 0x%x\n", - OMAP44XX_IRQ_L3_APP); + OMAP44XX_IRQ_L3_APP); goto err4; } - l3->app_irq = irq; return 0; @@ -216,7 +220,7 @@ err0: static int __exit omap4_l3_remove(struct platform_device *pdev) { - struct omap4_l3 *l3 = platform_get_drvdata(pdev); + struct omap4_l3 *l3 = platform_get_drvdata(pdev); free_irq(l3->app_irq, l3); free_irq(l3->debug_irq, l3); @@ -229,9 +233,9 @@ static int __exit omap4_l3_remove(struct platform_device *pdev) } static struct platform_driver omap4_l3_driver = { - .remove = __exit_p(omap4_l3_remove), - .driver = { - .name = "omap_l3_noc", + .remove = __exit_p(omap4_l3_remove), + .driver = { + .name = "omap_l3_noc", }, }; diff --git a/arch/arm/mach-omap2/omap_l3_noc.h b/arch/arm/mach-omap2/omap_l3_noc.h index 359b83348aed..90b50984cd2e 100644 --- a/arch/arm/mach-omap2/omap_l3_noc.h +++ b/arch/arm/mach-omap2/omap_l3_noc.h @@ -1,132 +1,162 @@ - /* - * OMAP4XXX L3 Interconnect error handling driver header - * - * Copyright (C) 2011 Texas Corporation - * Santosh Shilimkar <santosh.shilimkar@ti.com> - * sricharan <r.sricharan@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ +/* + * OMAP4XXX L3 Interconnect error handling driver header + * + * Copyright (C) 2011 Texas Corporation + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * sricharan <r.sricharan@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ #ifndef __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H #define __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H -/* - * L3 register offsets - */ #define L3_MODULES 3 #define CLEAR_STDERR_LOG (1 << 31) #define CUSTOM_ERROR 0x2 #define STANDARD_ERROR 0x0 #define INBAND_ERROR 0x0 -#define EMIF_KERRLOG_OFFSET 0x10 -#define L3_SLAVE_ADDRESS_OFFSET 0x14 -#define LOGICAL_ADDR_ERRORLOG 0x4 #define L3_APPLICATION_ERROR 0x0 #define L3_DEBUG_ERROR 0x1 -u32 l3_flagmux[L3_MODULES] = { - 0x50C, - 0x100C, - 0X020C +/* L3 TARG register offsets */ +#define L3_TARG_STDERRLOG_MAIN 0x48 +#define L3_TARG_STDERRLOG_SLVOFSLSB 0x5c +#define L3_TARG_STDERRLOG_MSTADDR 0x68 +#define L3_FLAGMUX_REGERR0 0xc + +#define NUM_OF_L3_MASTERS (sizeof(l3_masters)/sizeof(l3_masters[0])) + +static u32 l3_flagmux[L3_MODULES] = { + 0x500, + 0x1000, + 0X0200 }; -/* - * L3 Target standard Error register offsets - */ -u32 l3_targ_stderrlog_main_clk1[] = { - 0x148, /* DMM1 */ - 0x248, /* DMM2 */ - 0x348, /* ABE */ - 0x448, /* L4CFG */ - 0x648 /* CLK2 PWR DISC */ +/* L3 Target standard Error register offsets */ +static u32 l3_targ_inst_clk1[] = { + 0x100, /* DMM1 */ + 0x200, /* DMM2 */ + 0x300, /* ABE */ + 0x400, /* L4CFG */ + 0x600 /* CLK2 PWR DISC */ }; -u32 l3_targ_stderrlog_main_clk2[] = { - 0x548, /* CORTEX M3 */ - 0x348, /* DSS */ - 0x148, /* GPMC */ - 0x448, /* ISS */ - 0x748, /* IVAHD */ - 0xD48, /* missing in TRM corresponds to AES1*/ - 0x948, /* L4 PER0*/ - 0x248, /* OCMRAM */ - 0x148, /* missing in TRM corresponds to GPMC sERROR*/ - 0x648, /* SGX */ - 0x848, /* SL2 */ - 0x1648, /* C2C */ - 0x1148, /* missing in TRM corresponds PWR DISC CLK1*/ - 0xF48, /* missing in TRM corrsponds to SHA1*/ - 0xE48, /* missing in TRM corresponds to AES2*/ - 0xC48, /* L4 PER3 */ - 0xA48, /* L4 PER1*/ - 0xB48 /* L4 PER2*/ +static u32 l3_targ_inst_clk2[] = { + 0x500, /* CORTEX M3 */ + 0x300, /* DSS */ + 0x100, /* GPMC */ + 0x400, /* ISS */ + 0x700, /* IVAHD */ + 0xD00, /* missing in TRM corresponds to AES1*/ + 0x900, /* L4 PER0*/ + 0x200, /* OCMRAM */ + 0x100, /* missing in TRM corresponds to GPMC sERROR*/ + 0x600, /* SGX */ + 0x800, /* SL2 */ + 0x1600, /* C2C */ + 0x1100, /* missing in TRM corresponds PWR DISC CLK1*/ + 0xF00, /* missing in TRM corrsponds to SHA1*/ + 0xE00, /* missing in TRM corresponds to AES2*/ + 0xC00, /* L4 PER3 */ + 0xA00, /* L4 PER1*/ + 0xB00 /* L4 PER2*/ }; -u32 l3_targ_stderrlog_main_clk3[] = { - 0x0148 /* EMUSS */ +static u32 l3_targ_inst_clk3[] = { + 0x0100 /* EMUSS */ }; -char *l3_targ_stderrlog_main_name[L3_MODULES][18] = { +static struct l3_masters_data { + u32 id; + char name[10]; +} l3_masters[] = { + { 0x0 , "MPU"}, + { 0x10, "CS_ADP"}, + { 0x14, "xxx"}, + { 0x20, "DSP"}, + { 0x30, "IVAHD"}, + { 0x40, "ISS"}, + { 0x44, "DucatiM3"}, + { 0x48, "FaceDetect"}, + { 0x50, "SDMA_Rd"}, + { 0x54, "SDMA_Wr"}, + { 0x58, "xxx"}, + { 0x5C, "xxx"}, + { 0x60, "SGX"}, + { 0x70, "DSS"}, + { 0x80, "C2C"}, + { 0x88, "xxx"}, + { 0x8C, "xxx"}, + { 0x90, "HSI"}, + { 0xA0, "MMC1"}, + { 0xA4, "MMC2"}, + { 0xA8, "MMC6"}, + { 0xB0, "UNIPRO1"}, + { 0xC0, "USBHOSTHS"}, + { 0xC4, "USBOTGHS"}, + { 0xC8, "USBHOSTFS"} +}; + +static char *l3_targ_inst_name[L3_MODULES][18] = { { - "DMM1", - "DMM2", - "ABE", - "L4CFG", - "CLK2 PWR DISC", + "DMM1", + "DMM2", + "ABE", + "L4CFG", + "CLK2 PWR DISC", }, { - "CORTEX M3" , - "DSS ", - "GPMC ", - "ISS ", - "IVAHD ", - "AES1", - "L4 PER0", - "OCMRAM ", - "GPMC sERROR", - "SGX ", - "SL2 ", - "C2C ", - "PWR DISC CLK1", - "SHA1", - "AES2", - "L4 PER3", - "L4 PER1", - "L4 PER2", + "CORTEX M3" , + "DSS ", + "GPMC ", + "ISS ", + "IVAHD ", + "AES1", + "L4 PER0", + "OCMRAM ", + "GPMC sERROR", + "SGX ", + "SL2 ", + "C2C ", + "PWR DISC CLK1", + "SHA1", + "AES2", + "L4 PER3", + "L4 PER1", + "L4 PER2", }, { - "EMUSS", + "EMUSS", }, }; -u32 *l3_targ[L3_MODULES] = { - l3_targ_stderrlog_main_clk1, - l3_targ_stderrlog_main_clk2, - l3_targ_stderrlog_main_clk3, +static u32 *l3_targ[L3_MODULES] = { + l3_targ_inst_clk1, + l3_targ_inst_clk2, + l3_targ_inst_clk3, }; struct omap4_l3 { - struct device *dev; - struct clk *ick; + struct device *dev; + struct clk *ick; /* memory base */ - void __iomem *l3_base[4]; + void __iomem *l3_base[L3_MODULES]; - int debug_irq; - int app_irq; + int debug_irq; + int app_irq; }; - #endif diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c index 873c0e33b512..a05a62f9ee5b 100644 --- a/arch/arm/mach-omap2/omap_l3_smx.c +++ b/arch/arm/mach-omap2/omap_l3_smx.c @@ -1,26 +1,26 @@ - /* - * OMAP3XXX L3 Interconnect Driver - * - * Copyright (C) 2011 Texas Corporation - * Felipe Balbi <balbi@ti.com> - * Santosh Shilimkar <santosh.shilimkar@ti.com> - * Sricharan <r.sricharan@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ +/* + * OMAP3XXX L3 Interconnect Driver + * + * Copyright (C) 2011 Texas Corporation + * Felipe Balbi <balbi@ti.com> + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * Sricharan <r.sricharan@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ #include <linux/kernel.h> #include <linux/slab.h> @@ -135,7 +135,7 @@ static char *omap3_l3_initiator_string(u8 initid) } } -/** +/* * omap3_l3_block_irq - handles a register block's irq * @l3: struct omap3_l3 * * @base: register block base address @@ -150,30 +150,29 @@ static char *omap3_l3_initiator_string(u8 initid) static irqreturn_t omap3_l3_block_irq(struct omap3_l3 *l3, u64 error, int error_addr) { - u8 code = omap3_l3_decode_error_code(error); - u8 initid = omap3_l3_decode_initid(error); - u8 multi = error & L3_ERROR_LOG_MULTI; - u32 address = omap3_l3_decode_addr(error_addr); + u8 code = omap3_l3_decode_error_code(error); + u8 initid = omap3_l3_decode_initid(error); + u8 multi = error & L3_ERROR_LOG_MULTI; + u32 address = omap3_l3_decode_addr(error_addr); WARN(true, "%s seen by %s %s at address %x\n", - omap3_l3_code_string(code), - omap3_l3_initiator_string(initid), - multi ? "Multiple Errors" : "", - address); + omap3_l3_code_string(code), + omap3_l3_initiator_string(initid), + multi ? "Multiple Errors" : "", address); return IRQ_HANDLED; } static irqreturn_t omap3_l3_app_irq(int irq, void *_l3) { - struct omap3_l3 *l3 = _l3; - u64 status, clear; - u64 error; - u64 error_addr; - u64 err_source = 0; - void __iomem *base; - int int_type; - irqreturn_t ret = IRQ_NONE; + struct omap3_l3 *l3 = _l3; + u64 status, clear; + u64 error; + u64 error_addr; + u64 err_source = 0; + void __iomem *base; + int int_type; + irqreturn_t ret = IRQ_NONE; int_type = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR; if (!int_type) { @@ -191,14 +190,12 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3) } /* identify the error source */ - for (err_source = 0; !(status & (1 << err_source)); err_source++) - ; + err_source = __ffs(status); - base = l3->rt + *(omap3_l3_bases[int_type] + err_source); + base = l3->rt + omap3_l3_bases[int_type][err_source]; error = omap3_l3_readll(base, L3_ERROR_LOG); if (error) { error_addr = omap3_l3_readll(base, L3_ERROR_LOG_ADDR); - ret |= omap3_l3_block_irq(l3, error, error_addr); } @@ -215,9 +212,9 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3) static int __init omap3_l3_probe(struct platform_device *pdev) { - struct omap3_l3 *l3; - struct resource *res; - int ret; + struct omap3_l3 *l3; + struct resource *res; + int ret; l3 = kzalloc(sizeof(*l3), GFP_KERNEL); if (!l3) diff --git a/arch/arm/mach-omap2/omap_l3_smx.h b/arch/arm/mach-omap2/omap_l3_smx.h index ba2ed9a850cc..4f3cebca4179 100644 --- a/arch/arm/mach-omap2/omap_l3_smx.h +++ b/arch/arm/mach-omap2/omap_l3_smx.h @@ -1,26 +1,26 @@ - /* - * OMAP3XXX L3 Interconnect Driver header - * - * Copyright (C) 2011 Texas Corporation - * Felipe Balbi <balbi@ti.com> - * Santosh Shilimkar <santosh.shilimkar@ti.com> - * sricharan <r.sricharan@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 - * USA - */ +/* + * OMAP3XXX L3 Interconnect Driver header + * + * Copyright (C) 2011 Texas Corporation + * Felipe Balbi <balbi@ti.com> + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * sricharan <r.sricharan@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ #ifndef __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H #define __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H @@ -40,7 +40,7 @@ #define L3_SI_CONTROL 0x020 #define L3_SI_FLAG_STATUS_0 0x510 -const u64 shift = 1; +static const u64 shift = 1; #define L3_STATUS_0_MPUIA_BRST (shift << 0) #define L3_STATUS_0_MPUIA_RSP (shift << 1) @@ -78,32 +78,32 @@ const u64 shift = 1; #define L3_STATUS_0_L4EMUTA_REQ (shift << 60) #define L3_STATUS_0_MAD2DTA_REQ (shift << 61) -#define L3_STATUS_0_TIMEOUT_MASK (L3_STATUS_0_MPUIA_BRST \ - | L3_STATUS_0_MPUIA_RSP \ - | L3_STATUS_0_IVAIA_BRST \ - | L3_STATUS_0_IVAIA_RSP \ - | L3_STATUS_0_SGXIA_BRST \ - | L3_STATUS_0_SGXIA_RSP \ - | L3_STATUS_0_CAMIA_BRST \ - | L3_STATUS_0_CAMIA_RSP \ - | L3_STATUS_0_DISPIA_BRST \ - | L3_STATUS_0_DISPIA_RSP \ - | L3_STATUS_0_DMARDIA_BRST \ - | L3_STATUS_0_DMARDIA_RSP \ - | L3_STATUS_0_DMAWRIA_BRST \ - | L3_STATUS_0_DMAWRIA_RSP \ - | L3_STATUS_0_USBOTGIA_BRST \ - | L3_STATUS_0_USBOTGIA_RSP \ - | L3_STATUS_0_USBHOSTIA_BRST \ - | L3_STATUS_0_SMSTA_REQ \ - | L3_STATUS_0_GPMCTA_REQ \ - | L3_STATUS_0_OCMRAMTA_REQ \ - | L3_STATUS_0_OCMROMTA_REQ \ - | L3_STATUS_0_IVATA_REQ \ - | L3_STATUS_0_SGXTA_REQ \ - | L3_STATUS_0_L4CORETA_REQ \ - | L3_STATUS_0_L4PERTA_REQ \ - | L3_STATUS_0_L4EMUTA_REQ \ +#define L3_STATUS_0_TIMEOUT_MASK (L3_STATUS_0_MPUIA_BRST \ + | L3_STATUS_0_MPUIA_RSP \ + | L3_STATUS_0_IVAIA_BRST \ + | L3_STATUS_0_IVAIA_RSP \ + | L3_STATUS_0_SGXIA_BRST \ + | L3_STATUS_0_SGXIA_RSP \ + | L3_STATUS_0_CAMIA_BRST \ + | L3_STATUS_0_CAMIA_RSP \ + | L3_STATUS_0_DISPIA_BRST \ + | L3_STATUS_0_DISPIA_RSP \ + | L3_STATUS_0_DMARDIA_BRST \ + | L3_STATUS_0_DMARDIA_RSP \ + | L3_STATUS_0_DMAWRIA_BRST \ + | L3_STATUS_0_DMAWRIA_RSP \ + | L3_STATUS_0_USBOTGIA_BRST \ + | L3_STATUS_0_USBOTGIA_RSP \ + | L3_STATUS_0_USBHOSTIA_BRST \ + | L3_STATUS_0_SMSTA_REQ \ + | L3_STATUS_0_GPMCTA_REQ \ + | L3_STATUS_0_OCMRAMTA_REQ \ + | L3_STATUS_0_OCMROMTA_REQ \ + | L3_STATUS_0_IVATA_REQ \ + | L3_STATUS_0_SGXTA_REQ \ + | L3_STATUS_0_L4CORETA_REQ \ + | L3_STATUS_0_L4PERTA_REQ \ + | L3_STATUS_0_L4EMUTA_REQ \ | L3_STATUS_0_MAD2DTA_REQ) #define L3_SI_FLAG_STATUS_1 0x530 @@ -137,19 +137,19 @@ const u64 shift = 1; enum omap3_l3_initiator_id { /* LCD has 1 ID */ - OMAP_L3_LCD = 29, + OMAP_L3_LCD = 29, /* SAD2D has 1 ID */ - OMAP_L3_SAD2D = 28, + OMAP_L3_SAD2D = 28, /* MPU has 5 IDs */ - OMAP_L3_IA_MPU_SS_1 = 27, - OMAP_L3_IA_MPU_SS_2 = 26, - OMAP_L3_IA_MPU_SS_3 = 25, - OMAP_L3_IA_MPU_SS_4 = 24, - OMAP_L3_IA_MPU_SS_5 = 23, + OMAP_L3_IA_MPU_SS_1 = 27, + OMAP_L3_IA_MPU_SS_2 = 26, + OMAP_L3_IA_MPU_SS_3 = 25, + OMAP_L3_IA_MPU_SS_4 = 24, + OMAP_L3_IA_MPU_SS_5 = 23, /* IVA2.2 SS has 3 IDs*/ - OMAP_L3_IA_IVA_SS_1 = 22, - OMAP_L3_IA_IVA_SS_2 = 21, - OMAP_L3_IA_IVA_SS_3 = 20, + OMAP_L3_IA_IVA_SS_1 = 22, + OMAP_L3_IA_IVA_SS_2 = 21, + OMAP_L3_IA_IVA_SS_3 = 20, /* IVA 2.2 SS DMA has 6 IDS */ OMAP_L3_IA_IVA_SS_DMA_1 = 19, OMAP_L3_IA_IVA_SS_DMA_2 = 18, @@ -158,25 +158,25 @@ enum omap3_l3_initiator_id { OMAP_L3_IA_IVA_SS_DMA_5 = 15, OMAP_L3_IA_IVA_SS_DMA_6 = 14, /* SGX has 1 ID */ - OMAP_L3_IA_SGX = 13, + OMAP_L3_IA_SGX = 13, /* CAM has 3 ID */ - OMAP_L3_IA_CAM_1 = 12, - OMAP_L3_IA_CAM_2 = 11, - OMAP_L3_IA_CAM_3 = 10, + OMAP_L3_IA_CAM_1 = 12, + OMAP_L3_IA_CAM_2 = 11, + OMAP_L3_IA_CAM_3 = 10, /* DAP has 1 ID */ - OMAP_L3_IA_DAP = 9, + OMAP_L3_IA_DAP = 9, /* SDMA WR has 2 IDs */ - OMAP_L3_SDMA_WR_1 = 8, - OMAP_L3_SDMA_WR_2 = 7, + OMAP_L3_SDMA_WR_1 = 8, + OMAP_L3_SDMA_WR_2 = 7, /* SDMA RD has 4 IDs */ - OMAP_L3_SDMA_RD_1 = 6, - OMAP_L3_SDMA_RD_2 = 5, - OMAP_L3_SDMA_RD_3 = 4, - OMAP_L3_SDMA_RD_4 = 3, + OMAP_L3_SDMA_RD_1 = 6, + OMAP_L3_SDMA_RD_2 = 5, + OMAP_L3_SDMA_RD_3 = 4, + OMAP_L3_SDMA_RD_4 = 3, /* HSUSB OTG has 1 ID */ - OMAP_L3_USBOTG = 2, + OMAP_L3_USBOTG = 2, /* HSUSB HOST has 1 ID */ - OMAP_L3_USBHOST = 1, + OMAP_L3_USBHOST = 1, }; enum omap3_l3_code { @@ -192,21 +192,21 @@ enum omap3_l3_code { }; struct omap3_l3 { - struct device *dev; - struct clk *ick; + struct device *dev; + struct clk *ick; /* memory base*/ - void __iomem *rt; + void __iomem *rt; - int debug_irq; - int app_irq; + int debug_irq; + int app_irq; /* true when and inband functional error occurs */ - unsigned inband:1; + unsigned inband:1; }; /* offsets for l3 agents in order with the Flag status register */ -unsigned int __iomem omap3_l3_app_bases[] = { +static unsigned int omap3_l3_app_bases[] = { /* MPU IA */ 0x1400, 0x1400, @@ -305,7 +305,7 @@ unsigned int __iomem omap3_l3_app_bases[] = { 0, }; -unsigned int __iomem omap3_l3_debug_bases[] = { +static unsigned int omap3_l3_debug_bases[] = { /* MPU DATA IA */ 0x1400, /* RESERVED */ @@ -321,7 +321,7 @@ unsigned int __iomem omap3_l3_debug_bases[] = { /* REST RESERVED */ }; -u32 *omap3_l3_bases[] = { +static u32 *omap3_l3_bases[] = { omap3_l3_app_bases, omap3_l3_debug_bases, }; diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index 07d6140baa9d..f515a1a056d5 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -42,8 +42,11 @@ #define OMAP4_SRI2C_SLAVE_ADDR 0x12 #define OMAP4_VDD_MPU_SR_VOLT_REG 0x55 +#define OMAP4_VDD_MPU_SR_CMD_REG 0x56 #define OMAP4_VDD_IVA_SR_VOLT_REG 0x5B +#define OMAP4_VDD_IVA_SR_CMD_REG 0x5C #define OMAP4_VDD_CORE_SR_VOLT_REG 0x61 +#define OMAP4_VDD_CORE_SR_CMD_REG 0x62 #define OMAP4_VP_CONFIG_ERROROFFSET 0x00 #define OMAP4_VP_VSTEPMIN_VSTEPMIN 0x01 @@ -95,6 +98,8 @@ static unsigned long twl6030_vsel_to_uv(const u8 vsel) is_offset_valid = true; } + if (!vsel) + return 0; /* * There is no specific formula for voltage to vsel * conversion above 1.3V. There are special hardcoded @@ -106,9 +111,9 @@ static unsigned long twl6030_vsel_to_uv(const u8 vsel) return 1350000; if (smps_offset & 0x8) - return ((((vsel - 1) * 125) + 7000)) * 100; + return ((((vsel - 1) * 1266) + 70900)) * 10; else - return ((((vsel - 1) * 125) + 6000)) * 100; + return ((((vsel - 1) * 1266) + 60770)) * 10; } static u8 twl6030_uv_to_vsel(unsigned long uv) @@ -127,6 +132,8 @@ static u8 twl6030_uv_to_vsel(unsigned long uv) is_offset_valid = true; } + if (!uv) + return 0x00; /* * There is no specific formula for voltage to vsel * conversion above 1.3V. There are special hardcoded @@ -134,16 +141,21 @@ static u8 twl6030_uv_to_vsel(unsigned long uv) * hardcoding only for 1.35 V which is used for 1GH OPP for * OMAP4430. */ - if (uv == 1350000) + if (uv > twl6030_vsel_to_uv(0x39)) { + if (uv == 1350000) + return 0x3A; + pr_err("%s:OUT OF RANGE! non mapped vsel for %ld Vs max %ld\n", + __func__, uv, twl6030_vsel_to_uv(0x39)); return 0x3A; + } if (smps_offset & 0x8) - return DIV_ROUND_UP(uv - 700000, 12500) + 1; + return DIV_ROUND_UP(uv - 709000, 12660) + 1; else - return DIV_ROUND_UP(uv - 600000, 12500) + 1; + return DIV_ROUND_UP(uv - 607700, 12660) + 1; } -static struct omap_volt_pmic_info omap3_mpu_volt_info = { +static struct omap_voltdm_pmic omap3_mpu_pmic = { .slew_rate = 4000, .step_size = 12500, .on_volt = 1200000, @@ -158,12 +170,13 @@ static struct omap_volt_pmic_info omap3_mpu_volt_info = { .vp_vddmax = OMAP3430_VP1_VLIMITTO_VDDMAX, .vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR, - .pmic_reg = OMAP3_VDD_MPU_SR_CONTROL_REG, + .volt_reg_addr = OMAP3_VDD_MPU_SR_CONTROL_REG, + .i2c_high_speed = true, .vsel_to_uv = twl4030_vsel_to_uv, .uv_to_vsel = twl4030_uv_to_vsel, }; -static struct omap_volt_pmic_info omap3_core_volt_info = { +static struct omap_voltdm_pmic omap3_core_pmic = { .slew_rate = 4000, .step_size = 12500, .on_volt = 1200000, @@ -178,18 +191,19 @@ static struct omap_volt_pmic_info omap3_core_volt_info = { .vp_vddmax = OMAP3430_VP2_VLIMITTO_VDDMAX, .vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR, - .pmic_reg = OMAP3_VDD_CORE_SR_CONTROL_REG, + .volt_reg_addr = OMAP3_VDD_CORE_SR_CONTROL_REG, + .i2c_high_speed = true, .vsel_to_uv = twl4030_vsel_to_uv, .uv_to_vsel = twl4030_uv_to_vsel, }; -static struct omap_volt_pmic_info omap4_mpu_volt_info = { +static struct omap_voltdm_pmic omap4_mpu_pmic = { .slew_rate = 4000, - .step_size = 12500, - .on_volt = 1350000, - .onlp_volt = 1350000, - .ret_volt = 837500, - .off_volt = 600000, + .step_size = 12660, + .on_volt = 1375000, + .onlp_volt = 1375000, + .ret_volt = 830000, + .off_volt = 0, .volt_setup_time = 0, .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, @@ -198,18 +212,20 @@ static struct omap_volt_pmic_info omap4_mpu_volt_info = { .vp_vddmax = OMAP4_VP_MPU_VLIMITTO_VDDMAX, .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, - .pmic_reg = OMAP4_VDD_MPU_SR_VOLT_REG, + .volt_reg_addr = OMAP4_VDD_MPU_SR_VOLT_REG, + .cmd_reg_addr = OMAP4_VDD_MPU_SR_CMD_REG, + .i2c_high_speed = true, .vsel_to_uv = twl6030_vsel_to_uv, .uv_to_vsel = twl6030_uv_to_vsel, }; -static struct omap_volt_pmic_info omap4_iva_volt_info = { +static struct omap_voltdm_pmic omap4_iva_pmic = { .slew_rate = 4000, - .step_size = 12500, - .on_volt = 1100000, - .onlp_volt = 1100000, - .ret_volt = 837500, - .off_volt = 600000, + .step_size = 12660, + .on_volt = 1188000, + .onlp_volt = 1188000, + .ret_volt = 830000, + .off_volt = 0, .volt_setup_time = 0, .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, @@ -218,18 +234,20 @@ static struct omap_volt_pmic_info omap4_iva_volt_info = { .vp_vddmax = OMAP4_VP_IVA_VLIMITTO_VDDMAX, .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, - .pmic_reg = OMAP4_VDD_IVA_SR_VOLT_REG, + .volt_reg_addr = OMAP4_VDD_IVA_SR_VOLT_REG, + .cmd_reg_addr = OMAP4_VDD_IVA_SR_CMD_REG, + .i2c_high_speed = true, .vsel_to_uv = twl6030_vsel_to_uv, .uv_to_vsel = twl6030_uv_to_vsel, }; -static struct omap_volt_pmic_info omap4_core_volt_info = { +static struct omap_voltdm_pmic omap4_core_pmic = { .slew_rate = 4000, - .step_size = 12500, - .on_volt = 1100000, - .onlp_volt = 1100000, - .ret_volt = 837500, - .off_volt = 600000, + .step_size = 12660, + .on_volt = 1200000, + .onlp_volt = 1200000, + .ret_volt = 830000, + .off_volt = 0, .volt_setup_time = 0, .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, @@ -238,7 +256,8 @@ static struct omap_volt_pmic_info omap4_core_volt_info = { .vp_vddmax = OMAP4_VP_CORE_VLIMITTO_VDDMAX, .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, - .pmic_reg = OMAP4_VDD_CORE_SR_VOLT_REG, + .volt_reg_addr = OMAP4_VDD_CORE_SR_VOLT_REG, + .cmd_reg_addr = OMAP4_VDD_CORE_SR_CMD_REG, .vsel_to_uv = twl6030_vsel_to_uv, .uv_to_vsel = twl6030_uv_to_vsel, }; @@ -250,14 +269,14 @@ int __init omap4_twl_init(void) if (!cpu_is_omap44xx()) return -ENODEV; - voltdm = omap_voltage_domain_lookup("mpu"); - omap_voltage_register_pmic(voltdm, &omap4_mpu_volt_info); + voltdm = voltdm_lookup("mpu"); + omap_voltage_register_pmic(voltdm, &omap4_mpu_pmic); - voltdm = omap_voltage_domain_lookup("iva"); - omap_voltage_register_pmic(voltdm, &omap4_iva_volt_info); + voltdm = voltdm_lookup("iva"); + omap_voltage_register_pmic(voltdm, &omap4_iva_pmic); - voltdm = omap_voltage_domain_lookup("core"); - omap_voltage_register_pmic(voltdm, &omap4_core_volt_info); + voltdm = voltdm_lookup("core"); + omap_voltage_register_pmic(voltdm, &omap4_core_pmic); return 0; } @@ -270,10 +289,10 @@ int __init omap3_twl_init(void) return -ENODEV; if (cpu_is_omap3630()) { - omap3_mpu_volt_info.vp_vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN; - omap3_mpu_volt_info.vp_vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX; - omap3_core_volt_info.vp_vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN; - omap3_core_volt_info.vp_vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX; + omap3_mpu_pmic.vp_vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN; + omap3_mpu_pmic.vp_vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX; + omap3_core_pmic.vp_vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN; + omap3_core_pmic.vp_vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX; } /* @@ -288,11 +307,11 @@ int __init omap3_twl_init(void) if (!twl_sr_enable_autoinit) omap3_twl_set_sr_bit(true); - voltdm = omap_voltage_domain_lookup("mpu"); - omap_voltage_register_pmic(voltdm, &omap3_mpu_volt_info); + voltdm = voltdm_lookup("mpu_iva"); + omap_voltage_register_pmic(voltdm, &omap3_mpu_pmic); - voltdm = omap_voltage_domain_lookup("core"); - omap_voltage_register_pmic(voltdm, &omap3_core_volt_info); + voltdm = voltdm_lookup("core"); + omap_voltage_register_pmic(voltdm, &omap3_core_pmic); return 0; } diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c index ab8b35b780b5..9262a6b47702 100644 --- a/arch/arm/mach-omap2/opp.c +++ b/arch/arm/mach-omap2/opp.c @@ -69,7 +69,7 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def, opp_def->hwmod_name, i); return -EINVAL; } - dev = &oh->od->pdev.dev; + dev = &oh->od->pdev->dev; r = opp_add(dev, opp_def->freq, opp_def->u_volt); if (r) { diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 472bf22d5e84..0844e2ecfb4a 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -60,19 +60,19 @@ EXPORT_SYMBOL(omap4_get_dsp_device); static int _init_omap_device(char *name, struct device **new_dev) { struct omap_hwmod *oh; - struct omap_device *od; + struct platform_device *pdev; oh = omap_hwmod_lookup(name); if (WARN(!oh, "%s: could not find omap_hwmod for %s\n", __func__, name)) return -ENODEV; - od = omap_device_build(oh->name, 0, oh, NULL, 0, pm_lats, 0, false); - if (WARN(IS_ERR(od), "%s: could not build omap_device for %s\n", + pdev = omap_device_build(oh->name, 0, oh, NULL, 0, pm_lats, 0, false); + if (WARN(IS_ERR(pdev), "%s: could not build omap_device for %s\n", __func__, name)) return -ENODEV; - *new_dev = &od->pdev.dev; + *new_dev = &pdev->dev; return 0; } @@ -136,8 +136,8 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state) ret = pwrdm_set_next_pwrst(pwrdm, state); if (ret) { - printk(KERN_ERR "Unable to set state of powerdomain: %s\n", - pwrdm->name); + pr_err("%s: unable to set state of powerdomain: %s\n", + __func__, pwrdm->name); goto err; } @@ -161,11 +161,11 @@ err: } /* - * This API is to be called during init to put the various voltage + * This API is to be called during init to set the various voltage * domains to the voltage as per the opp table. Typically we boot up * at the nominal voltage. So this function finds out the rate of * the clock associated with the voltage domain, finds out the correct - * opp entry and puts the voltage domain to the voltage specifies + * opp entry and sets the voltage domain to the voltage specified * in the opp entry */ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, @@ -177,21 +177,20 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, unsigned long freq, bootup_volt; if (!vdd_name || !clk_name || !dev) { - printk(KERN_ERR "%s: Invalid parameters!\n", __func__); + pr_err("%s: invalid parameters\n", __func__); goto exit; } - voltdm = omap_voltage_domain_lookup(vdd_name); + voltdm = voltdm_lookup(vdd_name); if (IS_ERR(voltdm)) { - printk(KERN_ERR "%s: Unable to get vdd pointer for vdd_%s\n", + pr_err("%s: unable to get vdd pointer for vdd_%s\n", __func__, vdd_name); goto exit; } clk = clk_get(NULL, clk_name); if (IS_ERR(clk)) { - printk(KERN_ERR "%s: unable to get clk %s\n", - __func__, clk_name); + pr_err("%s: unable to get clk %s\n", __func__, clk_name); goto exit; } @@ -200,24 +199,23 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, opp = opp_find_freq_ceil(dev, &freq); if (IS_ERR(opp)) { - printk(KERN_ERR "%s: unable to find boot up OPP for vdd_%s\n", + pr_err("%s: unable to find boot up OPP for vdd_%s\n", __func__, vdd_name); goto exit; } bootup_volt = opp_get_voltage(opp); if (!bootup_volt) { - printk(KERN_ERR "%s: unable to find voltage corresponding" + pr_err("%s: unable to find voltage corresponding " "to the bootup OPP for vdd_%s\n", __func__, vdd_name); goto exit; } - omap_voltage_scale_vdd(voltdm, bootup_volt); + voltdm_scale(voltdm, bootup_volt); return 0; exit: - printk(KERN_ERR "%s: Unable to put vdd_%s to its init voltage\n\n", - __func__, vdd_name); + pr_err("%s: unable to set vdd_%s\n", __func__, vdd_name); return -EINVAL; } @@ -226,7 +224,7 @@ static void __init omap3_init_voltages(void) if (!cpu_is_omap34xx()) return; - omap2_set_init_voltage("mpu", "dpll1_ck", mpu_dev); + omap2_set_init_voltage("mpu_iva", "dpll1_ck", mpu_dev); omap2_set_init_voltage("core", "l3_ick", l3_dev); } diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index bf089e743ed9..cf0c216132ab 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -53,8 +53,6 @@ #include "powerdomain.h" #include "clockdomain.h" -static int omap2_pm_debug; - #ifdef CONFIG_SUSPEND static suspend_state_t suspend_state = PM_SUSPEND_ON; static inline bool is_suspending(void) @@ -96,7 +94,6 @@ static int omap2_fclks_active(void) static void omap2_enter_full_retention(void) { u32 l; - struct timespec ts_preidle, ts_postidle, ts_idle; /* There is 1 reference hold for all children of the oscillator * clock, the following will remove it. If no one else uses the @@ -124,10 +121,6 @@ static void omap2_enter_full_retention(void) omap2_gpio_prepare_for_idle(0); - if (omap2_pm_debug) { - getnstimeofday(&ts_preidle); - } - /* One last check for pending IRQs to avoid extra latency due * to sleeping unnecessarily. */ if (omap_irq_pending()) @@ -155,13 +148,6 @@ static void omap2_enter_full_retention(void) console_unlock(); no_sleep: - if (omap2_pm_debug) { - unsigned long long tmp; - - getnstimeofday(&ts_postidle); - ts_idle = timespec_sub(ts_postidle, ts_preidle); - tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC; - } omap2_gpio_resume_after_idle(); clk_enable(osc_ck); @@ -219,7 +205,6 @@ static int omap2_allow_mpu_retention(void) static void omap2_enter_mpu_retention(void) { int only_idle = 0; - struct timespec ts_preidle, ts_postidle, ts_idle; /* Putting MPU into the WFI state while a transfer is active * seems to cause the I2C block to timeout. Why? Good question. */ @@ -246,19 +231,7 @@ static void omap2_enter_mpu_retention(void) only_idle = 1; } - if (omap2_pm_debug) { - getnstimeofday(&ts_preidle); - } - omap2_sram_idle(); - - if (omap2_pm_debug) { - unsigned long long tmp; - - getnstimeofday(&ts_postidle); - ts_idle = timespec_sub(ts_postidle, ts_preidle); - tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC; - } } static int omap2_can_sleep(void) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 7255d9bce868..c8cbd00a41af 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -55,7 +55,7 @@ static suspend_state_t suspend_state = PM_SUSPEND_ON; static inline bool is_suspending(void) { - return (suspend_state != PM_SUSPEND_ON); + return (suspend_state != PM_SUSPEND_ON) && console_suspend_enabled; } #else static inline bool is_suspending(void) diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 896cb4c5eb1a..5164d587ef52 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -77,6 +77,7 @@ static struct powerdomain *_pwrdm_lookup(const char *name) static int _pwrdm_register(struct powerdomain *pwrdm) { int i; + struct voltagedomain *voltdm; if (!pwrdm || !pwrdm->name) return -EINVAL; @@ -91,6 +92,16 @@ static int _pwrdm_register(struct powerdomain *pwrdm) if (_pwrdm_lookup(pwrdm->name)) return -EEXIST; + voltdm = voltdm_lookup(pwrdm->voltdm.name); + if (!voltdm) { + pr_err("powerdomain: %s: voltagedomain %s does not exist\n", + pwrdm->name, pwrdm->voltdm.name); + return -EINVAL; + } + pwrdm->voltdm.ptr = voltdm; + INIT_LIST_HEAD(&pwrdm->voltdm_node); + voltdm_add_pwrdm(voltdm, pwrdm); + list_add(&pwrdm->node, &pwrdm_list); /* Initialize the powerdomain's state counter */ @@ -427,6 +438,18 @@ int pwrdm_for_each_clkdm(struct powerdomain *pwrdm, } /** + * pwrdm_get_voltdm - return a ptr to the voltdm that this pwrdm resides in + * @pwrdm: struct powerdomain * + * + * Return a pointer to the struct voltageomain that the specified powerdomain + * @pwrdm exists in. + */ +struct voltagedomain *pwrdm_get_voltdm(struct powerdomain *pwrdm) +{ + return pwrdm->voltdm.ptr; +} + +/** * pwrdm_get_mem_bank_count - get number of memory banks in this powerdomain * @pwrdm: struct powerdomain * * diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h index 8febd84e5e31..42e6dd8f2a78 100644 --- a/arch/arm/mach-omap2/powerdomain.h +++ b/arch/arm/mach-omap2/powerdomain.h @@ -24,6 +24,8 @@ #include <plat/cpu.h> +#include "voltage.h" + /* Powerdomain basic power states */ #define PWRDM_POWER_OFF 0x0 #define PWRDM_POWER_RET 0x1 @@ -78,6 +80,7 @@ struct powerdomain; /** * struct powerdomain - OMAP powerdomain * @name: Powerdomain name + * @voltdm: voltagedomain containing this powerdomain * @prcm_offs: the address offset from CM_BASE/PRM_BASE * @prcm_partition: (OMAP4 only) the PRCM partition ID containing @prcm_offs * @pwrsts: Possible powerdomain power states @@ -88,6 +91,7 @@ struct powerdomain; * @pwrsts_mem_on: Possible memory bank pwrstates when pwrdm in ON * @pwrdm_clkdms: Clockdomains in this powerdomain * @node: list_head linking all powerdomains + * @voltdm_node: list_head linking all powerdomains in a voltagedomain * @state: * @state_counter: * @timer: @@ -97,6 +101,10 @@ struct powerdomain; */ struct powerdomain { const char *name; + union { + const char *name; + struct voltagedomain *ptr; + } voltdm; const s16 prcm_offs; const u8 pwrsts; const u8 pwrsts_logic_ret; @@ -107,6 +115,7 @@ struct powerdomain { const u8 prcm_partition; struct clockdomain *pwrdm_clkdms[PWRDM_MAX_CLKDMS]; struct list_head node; + struct list_head voltdm_node; int state; unsigned state_counter[PWRDM_MAX_PWRSTS]; unsigned ret_logic_off_counter; @@ -176,6 +185,7 @@ int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm); int pwrdm_for_each_clkdm(struct powerdomain *pwrdm, int (*fn)(struct powerdomain *pwrdm, struct clockdomain *clkdm)); +struct voltagedomain *pwrdm_get_voltdm(struct powerdomain *pwrdm); int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm); diff --git a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c index cf600e22bf8e..6a17e4ca1d79 100644 --- a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c +++ b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c @@ -1,7 +1,7 @@ /* * OMAP2 and OMAP3 powerdomain control * - * Copyright (C) 2009-2010 Texas Instruments, Inc. + * Copyright (C) 2009-2011 Texas Instruments, Inc. * Copyright (C) 2007-2009 Nokia Corporation * * Derived from mach-omap2/powerdomain.c written by Paul Walmsley diff --git a/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c index bf30483d5cb0..d3a5399091ad 100644 --- a/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c @@ -54,10 +54,12 @@ struct powerdomain gfx_omap2_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* MEMONSTATE */ }, + .voltdm = { .name = "core" }, }; struct powerdomain wkup_omap2_pwrdm = { .name = "wkup_pwrdm", .prcm_offs = WKUP_MOD, .pwrsts = PWRSTS_ON, + .voltdm = { .name = "wakeup" }, }; diff --git a/arch/arm/mach-omap2/powerdomains2xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_data.c index bb4394e3b621..2385c1f009ee 100644 --- a/arch/arm/mach-omap2/powerdomains2xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains2xxx_data.c @@ -37,6 +37,7 @@ static struct powerdomain dsp_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, }, + .voltdm = { .name = "core" }, }; static struct powerdomain mpu_24xx_pwrdm = { @@ -51,6 +52,7 @@ static struct powerdomain mpu_24xx_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, }, + .voltdm = { .name = "core" }, }; static struct powerdomain core_24xx_pwrdm = { @@ -68,6 +70,7 @@ static struct powerdomain core_24xx_pwrdm = { [1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */ [2] = PWRSTS_OFF_RET_ON, /* MEM3ONSTATE */ }, + .voltdm = { .name = "core" }, }; @@ -89,6 +92,7 @@ static struct powerdomain mdm_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* MEMONSTATE */ }, + .voltdm = { .name = "core" }, }; /* diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c index e4f3a7d6ecfc..8ef26daeed68 100644 --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c @@ -51,6 +51,7 @@ static struct powerdomain iva2_pwrdm = { [2] = PWRSTS_OFF_ON, [3] = PWRSTS_ON, }, + .voltdm = { .name = "mpu_iva" }, }; static struct powerdomain mpu_3xxx_pwrdm = { @@ -66,6 +67,7 @@ static struct powerdomain mpu_3xxx_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_OFF_ON, }, + .voltdm = { .name = "mpu_iva" }, }; /* @@ -92,6 +94,7 @@ static struct powerdomain core_3xxx_pre_es3_1_pwrdm = { [0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */ [1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */ }, + .voltdm = { .name = "core" }, }; static struct powerdomain core_3xxx_es3_1_pwrdm = { @@ -113,6 +116,7 @@ static struct powerdomain core_3xxx_es3_1_pwrdm = { [0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */ [1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */ }, + .voltdm = { .name = "core" }, }; static struct powerdomain dss_pwrdm = { @@ -127,6 +131,7 @@ static struct powerdomain dss_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* MEMONSTATE */ }, + .voltdm = { .name = "core" }, }; /* @@ -147,6 +152,7 @@ static struct powerdomain sgx_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* MEMONSTATE */ }, + .voltdm = { .name = "core" }, }; static struct powerdomain cam_pwrdm = { @@ -161,6 +167,7 @@ static struct powerdomain cam_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* MEMONSTATE */ }, + .voltdm = { .name = "core" }, }; static struct powerdomain per_pwrdm = { @@ -175,11 +182,13 @@ static struct powerdomain per_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* MEMONSTATE */ }, + .voltdm = { .name = "core" }, }; static struct powerdomain emu_pwrdm = { .name = "emu_pwrdm", .prcm_offs = OMAP3430_EMU_MOD, + .voltdm = { .name = "core" }, }; static struct powerdomain neon_pwrdm = { @@ -187,6 +196,7 @@ static struct powerdomain neon_pwrdm = { .prcm_offs = OMAP3430_NEON_MOD, .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRSTS_RET, + .voltdm = { .name = "mpu_iva" }, }; static struct powerdomain usbhost_pwrdm = { @@ -208,31 +218,37 @@ static struct powerdomain usbhost_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* MEMONSTATE */ }, + .voltdm = { .name = "core" }, }; static struct powerdomain dpll1_pwrdm = { .name = "dpll1_pwrdm", .prcm_offs = MPU_MOD, + .voltdm = { .name = "mpu_iva" }, }; static struct powerdomain dpll2_pwrdm = { .name = "dpll2_pwrdm", .prcm_offs = OMAP3430_IVA2_MOD, + .voltdm = { .name = "mpu_iva" }, }; static struct powerdomain dpll3_pwrdm = { .name = "dpll3_pwrdm", .prcm_offs = PLL_MOD, + .voltdm = { .name = "core" }, }; static struct powerdomain dpll4_pwrdm = { .name = "dpll4_pwrdm", .prcm_offs = PLL_MOD, + .voltdm = { .name = "core" }, }; static struct powerdomain dpll5_pwrdm = { .name = "dpll5_pwrdm", .prcm_offs = PLL_MOD, + .voltdm = { .name = "core" }, }; /* As powerdomains are added or removed above, this list must also be changed */ diff --git a/arch/arm/mach-omap2/powerdomains44xx_data.c b/arch/arm/mach-omap2/powerdomains44xx_data.c index cbce0c9069cd..704664c0e259 100644 --- a/arch/arm/mach-omap2/powerdomains44xx_data.c +++ b/arch/arm/mach-omap2/powerdomains44xx_data.c @@ -33,6 +33,7 @@ /* core_44xx_pwrdm: CORE power domain */ static struct powerdomain core_44xx_pwrdm = { .name = "core_pwrdm", + .voltdm = { .name = "core" }, .prcm_offs = OMAP4430_PRM_CORE_INST, .prcm_partition = OMAP4430_PRM_PARTITION, .pwrsts = PWRSTS_RET_ON, @@ -58,6 +59,7 @@ static struct powerdomain core_44xx_pwrdm = { /* gfx_44xx_pwrdm: 3D accelerator power domain */ static struct powerdomain gfx_44xx_pwrdm = { .name = "gfx_pwrdm", + .voltdm = { .name = "core" }, .prcm_offs = OMAP4430_PRM_GFX_INST, .prcm_partition = OMAP4430_PRM_PARTITION, .pwrsts = PWRSTS_OFF_ON, @@ -74,6 +76,7 @@ static struct powerdomain gfx_44xx_pwrdm = { /* abe_44xx_pwrdm: Audio back end power domain */ static struct powerdomain abe_44xx_pwrdm = { .name = "abe_pwrdm", + .voltdm = { .name = "iva" }, .prcm_offs = OMAP4430_PRM_ABE_INST, .prcm_partition = OMAP4430_PRM_PARTITION, .pwrsts = PWRSTS_OFF_RET_ON, @@ -93,6 +96,7 @@ static struct powerdomain abe_44xx_pwrdm = { /* dss_44xx_pwrdm: Display subsystem power domain */ static struct powerdomain dss_44xx_pwrdm = { .name = "dss_pwrdm", + .voltdm = { .name = "core" }, .prcm_offs = OMAP4430_PRM_DSS_INST, .prcm_partition = OMAP4430_PRM_PARTITION, .pwrsts = PWRSTS_OFF_RET_ON, @@ -110,6 +114,7 @@ static struct powerdomain dss_44xx_pwrdm = { /* tesla_44xx_pwrdm: Tesla processor power domain */ static struct powerdomain tesla_44xx_pwrdm = { .name = "tesla_pwrdm", + .voltdm = { .name = "iva" }, .prcm_offs = OMAP4430_PRM_TESLA_INST, .prcm_partition = OMAP4430_PRM_PARTITION, .pwrsts = PWRSTS_OFF_RET_ON, @@ -131,6 +136,7 @@ static struct powerdomain tesla_44xx_pwrdm = { /* wkup_44xx_pwrdm: Wake-up power domain */ static struct powerdomain wkup_44xx_pwrdm = { .name = "wkup_pwrdm", + .voltdm = { .name = "wakeup" }, .prcm_offs = OMAP4430_PRM_WKUP_INST, .prcm_partition = OMAP4430_PRM_PARTITION, .pwrsts = PWRSTS_ON, @@ -146,6 +152,7 @@ static struct powerdomain wkup_44xx_pwrdm = { /* cpu0_44xx_pwrdm: MPU0 processor and Neon coprocessor power domain */ static struct powerdomain cpu0_44xx_pwrdm = { .name = "cpu0_pwrdm", + .voltdm = { .name = "mpu" }, .prcm_offs = OMAP4430_PRCM_MPU_CPU0_INST, .prcm_partition = OMAP4430_PRCM_MPU_PARTITION, .pwrsts = PWRSTS_OFF_RET_ON, @@ -162,6 +169,7 @@ static struct powerdomain cpu0_44xx_pwrdm = { /* cpu1_44xx_pwrdm: MPU1 processor and Neon coprocessor power domain */ static struct powerdomain cpu1_44xx_pwrdm = { .name = "cpu1_pwrdm", + .voltdm = { .name = "mpu" }, .prcm_offs = OMAP4430_PRCM_MPU_CPU1_INST, .prcm_partition = OMAP4430_PRCM_MPU_PARTITION, .pwrsts = PWRSTS_OFF_RET_ON, @@ -178,6 +186,7 @@ static struct powerdomain cpu1_44xx_pwrdm = { /* emu_44xx_pwrdm: Emulation power domain */ static struct powerdomain emu_44xx_pwrdm = { .name = "emu_pwrdm", + .voltdm = { .name = "wakeup" }, .prcm_offs = OMAP4430_PRM_EMU_INST, .prcm_partition = OMAP4430_PRM_PARTITION, .pwrsts = PWRSTS_OFF_ON, @@ -193,6 +202,7 @@ static struct powerdomain emu_44xx_pwrdm = { /* mpu_44xx_pwrdm: Modena processor and the Neon coprocessor power domain */ static struct powerdomain mpu_44xx_pwrdm = { .name = "mpu_pwrdm", + .voltdm = { .name = "mpu" }, .prcm_offs = OMAP4430_PRM_MPU_INST, .prcm_partition = OMAP4430_PRM_PARTITION, .pwrsts = PWRSTS_RET_ON, @@ -213,6 +223,7 @@ static struct powerdomain mpu_44xx_pwrdm = { /* ivahd_44xx_pwrdm: IVA-HD power domain */ static struct powerdomain ivahd_44xx_pwrdm = { .name = "ivahd_pwrdm", + .voltdm = { .name = "iva" }, .prcm_offs = OMAP4430_PRM_IVAHD_INST, .prcm_partition = OMAP4430_PRM_PARTITION, .pwrsts = PWRSTS_OFF_RET_ON, @@ -236,6 +247,7 @@ static struct powerdomain ivahd_44xx_pwrdm = { /* cam_44xx_pwrdm: Camera subsystem power domain */ static struct powerdomain cam_44xx_pwrdm = { .name = "cam_pwrdm", + .voltdm = { .name = "core" }, .prcm_offs = OMAP4430_PRM_CAM_INST, .prcm_partition = OMAP4430_PRM_PARTITION, .pwrsts = PWRSTS_OFF_ON, @@ -252,6 +264,7 @@ static struct powerdomain cam_44xx_pwrdm = { /* l3init_44xx_pwrdm: L3 initators pheripherals power domain */ static struct powerdomain l3init_44xx_pwrdm = { .name = "l3init_pwrdm", + .voltdm = { .name = "core" }, .prcm_offs = OMAP4430_PRM_L3INIT_INST, .prcm_partition = OMAP4430_PRM_PARTITION, .pwrsts = PWRSTS_RET_ON, @@ -269,6 +282,7 @@ static struct powerdomain l3init_44xx_pwrdm = { /* l4per_44xx_pwrdm: Target peripherals power domain */ static struct powerdomain l4per_44xx_pwrdm = { .name = "l4per_pwrdm", + .voltdm = { .name = "core" }, .prcm_offs = OMAP4430_PRM_L4PER_INST, .prcm_partition = OMAP4430_PRM_PARTITION, .pwrsts = PWRSTS_RET_ON, @@ -291,6 +305,7 @@ static struct powerdomain l4per_44xx_pwrdm = { */ static struct powerdomain always_on_core_44xx_pwrdm = { .name = "always_on_core_pwrdm", + .voltdm = { .name = "core" }, .prcm_offs = OMAP4430_PRM_ALWAYS_ON_INST, .prcm_partition = OMAP4430_PRM_PARTITION, .pwrsts = PWRSTS_ON, @@ -299,6 +314,7 @@ static struct powerdomain always_on_core_44xx_pwrdm = { /* cefuse_44xx_pwrdm: Customer efuse controller power domain */ static struct powerdomain cefuse_44xx_pwrdm = { .name = "cefuse_pwrdm", + .voltdm = { .name = "core" }, .prcm_offs = OMAP4430_PRM_CEFUSE_INST, .prcm_partition = OMAP4430_PRM_PARTITION, .pwrsts = PWRSTS_OFF_ON, diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index 051213fbc346..f02d87f68e54 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -20,6 +20,8 @@ #include <plat/cpu.h> #include <plat/prcm.h> +#include "vp.h" + #include "prm2xxx_3xxx.h" #include "cm2xxx_3xxx.h" #include "prm-regbits-24xx.h" @@ -156,3 +158,57 @@ int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift) return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0; } + +/* PRM VP */ + +/* + * struct omap3_vp - OMAP3 VP register access description. + * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg + */ +struct omap3_vp { + u32 tranxdone_status; +}; + +static struct omap3_vp omap3_vp[] = { + [OMAP3_VP_VDD_MPU_ID] = { + .tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK, + }, + [OMAP3_VP_VDD_CORE_ID] = { + .tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK, + }, +}; + +#define MAX_VP_ID ARRAY_SIZE(omap3_vp); + +u32 omap3_prm_vp_check_txdone(u8 vp_id) +{ + struct omap3_vp *vp = &omap3_vp[vp_id]; + u32 irqstatus; + + irqstatus = omap2_prm_read_mod_reg(OCP_MOD, + OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + return irqstatus & vp->tranxdone_status; +} + +void omap3_prm_vp_clear_txdone(u8 vp_id) +{ + struct omap3_vp *vp = &omap3_vp[vp_id]; + + omap2_prm_write_mod_reg(vp->tranxdone_status, + OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); +} + +u32 omap3_prm_vcvp_read(u8 offset) +{ + return omap2_prm_read_mod_reg(OMAP3430_GR_MOD, offset); +} + +void omap3_prm_vcvp_write(u32 val, u8 offset) +{ + omap2_prm_write_mod_reg(val, OMAP3430_GR_MOD, offset); +} + +u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset) +{ + return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset); +} diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h index a1fc62a39dbb..cef533df0861 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.h +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h @@ -303,7 +303,19 @@ extern int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift); extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift); extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift); +/* OMAP3-specific VP functions */ +u32 omap3_prm_vp_check_txdone(u8 vp_id); +void omap3_prm_vp_clear_txdone(u8 vp_id); + +/* + * OMAP3 access functions for voltage controller (VC) and + * voltage proccessor (VP) in the PRM. + */ +extern u32 omap3_prm_vcvp_read(u8 offset); +extern void omap3_prm_vcvp_write(u32 val, u8 offset); +extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); #endif /* CONFIG_ARCH_OMAP4 */ + #endif /* diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index 00165558fc4d..495a31a7e8a7 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -21,8 +21,11 @@ #include <plat/cpu.h> #include <plat/prcm.h> +#include "vp.h" #include "prm44xx.h" #include "prm-regbits-44xx.h" +#include "prcm44xx.h" +#include "prminst44xx.h" /* PRM low-level functions */ @@ -50,3 +53,71 @@ u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 reg) return v; } + +/* PRM VP */ + +/* + * struct omap4_vp - OMAP4 VP register access description. + * @irqstatus_mpu: offset to IRQSTATUS_MPU register for VP + * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg + */ +struct omap4_vp { + u32 irqstatus_mpu; + u32 tranxdone_status; +}; + +static struct omap4_vp omap4_vp[] = { + [OMAP4_VP_VDD_MPU_ID] = { + .irqstatus_mpu = OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET, + .tranxdone_status = OMAP4430_VP_MPU_TRANXDONE_ST_MASK, + }, + [OMAP4_VP_VDD_IVA_ID] = { + .irqstatus_mpu = OMAP4_PRM_IRQSTATUS_MPU_OFFSET, + .tranxdone_status = OMAP4430_VP_IVA_TRANXDONE_ST_MASK, + }, + [OMAP4_VP_VDD_CORE_ID] = { + .irqstatus_mpu = OMAP4_PRM_IRQSTATUS_MPU_OFFSET, + .tranxdone_status = OMAP4430_VP_CORE_TRANXDONE_ST_MASK, + }, +}; + +u32 omap4_prm_vp_check_txdone(u8 vp_id) +{ + struct omap4_vp *vp = &omap4_vp[vp_id]; + u32 irqstatus; + + irqstatus = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION, + OMAP4430_PRM_OCP_SOCKET_INST, + vp->irqstatus_mpu); + return irqstatus & vp->tranxdone_status; +} + +void omap4_prm_vp_clear_txdone(u8 vp_id) +{ + struct omap4_vp *vp = &omap4_vp[vp_id]; + + omap4_prminst_write_inst_reg(vp->tranxdone_status, + OMAP4430_PRM_PARTITION, + OMAP4430_PRM_OCP_SOCKET_INST, + vp->irqstatus_mpu); +}; + +u32 omap4_prm_vcvp_read(u8 offset) +{ + return omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION, + OMAP4430_PRM_DEVICE_INST, offset); +} + +void omap4_prm_vcvp_write(u32 val, u8 offset) +{ + omap4_prminst_write_inst_reg(val, OMAP4430_PRM_PARTITION, + OMAP4430_PRM_DEVICE_INST, offset); +} + +u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset) +{ + return omap4_prminst_rmw_inst_reg_bits(mask, bits, + OMAP4430_PRM_PARTITION, + OMAP4430_PRM_DEVICE_INST, + offset); +} diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h index 7dfa379b625d..3d66ccd849d2 100644 --- a/arch/arm/mach-omap2/prm44xx.h +++ b/arch/arm/mach-omap2/prm44xx.h @@ -751,6 +751,18 @@ extern u32 omap4_prm_read_inst_reg(s16 inst, u16 idx); extern void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 idx); extern u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx); +/* OMAP4-specific VP functions */ +u32 omap4_prm_vp_check_txdone(u8 vp_id); +void omap4_prm_vp_clear_txdone(u8 vp_id); + +/* + * OMAP4 access functions for voltage controller (VC) and + * voltage proccessor (VP) in the PRM. + */ +extern u32 omap4_prm_vcvp_read(u8 offset); +extern void omap4_prm_vcvp_write(u32 val, u8 offset); +extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); + # endif #endif diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 466fc722fa0f..3d1c1d393f8f 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -711,7 +711,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) { struct omap_uart_state *uart; struct omap_hwmod *oh; - struct omap_device *od; + struct platform_device *pdev; void *pdata = NULL; u32 pdata_size = 0; char *name; @@ -799,20 +799,20 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) if (WARN_ON(!oh)) return; - od = omap_device_build(name, uart->num, oh, pdata, pdata_size, + pdev = omap_device_build(name, uart->num, oh, pdata, pdata_size, omap_uart_latency, ARRAY_SIZE(omap_uart_latency), false); - WARN(IS_ERR(od), "Could not build omap_device for %s: %s.\n", + WARN(IS_ERR(pdev), "Could not build omap_device for %s: %s.\n", name, oh->name); - omap_device_disable_idle_on_suspend(od); + omap_device_disable_idle_on_suspend(pdev); oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt); uart->irq = oh->mpu_irqs[0].irq; uart->regshift = 2; uart->mapbase = oh->slaves[0]->addr->pa_start; uart->membase = omap_hwmod_get_mpu_rt_va(oh); - uart->pdev = &od->pdev; + uart->pdev = pdev; oh->dev_attr = uart; @@ -846,8 +846,8 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) if ((cpu_is_omap34xx() && uart->padconf) || (uart->wk_en && uart->wk_mask)) { - device_init_wakeup(&od->pdev.dev, true); - DEV_CREATE_FILE(&od->pdev.dev, &dev_attr_sleep_timeout); + device_init_wakeup(&pdev->dev, true); + DEV_CREATE_FILE(&pdev->dev, &dev_attr_sleep_timeout); } /* Enable the MDR1 errata for OMAP3 */ diff --git a/arch/arm/mach-omap2/smartreflex-class3.c b/arch/arm/mach-omap2/smartreflex-class3.c index f438cf4d847b..53d9d0a5b39d 100644 --- a/arch/arm/mach-omap2/smartreflex-class3.c +++ b/arch/arm/mach-omap2/smartreflex-class3.c @@ -15,7 +15,7 @@ static int sr_class3_enable(struct voltagedomain *voltdm) { - unsigned long volt = omap_voltage_get_nom_volt(voltdm); + unsigned long volt = voltdm_get_voltage(voltdm); if (!volt) { pr_warning("%s: Curr voltage unknown. Cannot enable sr_%s\n", @@ -32,7 +32,7 @@ static int sr_class3_disable(struct voltagedomain *voltdm, int is_volt_reset) omap_vp_disable(voltdm); sr_disable(voltdm); if (is_volt_reset) - omap_voltage_reset(voltdm); + voltdm_reset(voltdm); return 0; } diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 34c01a7de810..bb606c9709b2 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -62,6 +62,7 @@ static LIST_HEAD(sr_list); static struct omap_sr_class_data *sr_class; static struct omap_sr_pmic_data *sr_pmic_data; +static struct dentry *sr_dbg_dir; static inline void sr_write_reg(struct omap_sr *sr, unsigned offset, u32 value) { @@ -826,9 +827,10 @@ static int __init omap_sr_probe(struct platform_device *pdev) struct omap_sr *sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL); struct omap_sr_data *pdata = pdev->dev.platform_data; struct resource *mem, *irq; - struct dentry *vdd_dbg_dir, *nvalue_dir; + struct dentry *nvalue_dir; struct omap_volt_data *volt_data; int i, ret = 0; + char *name; if (!sr_info) { dev_err(&pdev->dev, "%s: unable to allocate sr_info\n", @@ -899,18 +901,25 @@ static int __init omap_sr_probe(struct platform_device *pdev) } dev_info(&pdev->dev, "%s: SmartReflex driver initialized\n", __func__); + if (!sr_dbg_dir) { + sr_dbg_dir = debugfs_create_dir("smartreflex", NULL); + if (!sr_dbg_dir) { + ret = PTR_ERR(sr_dbg_dir); + pr_err("%s:sr debugfs dir creation failed(%d)\n", + __func__, ret); + goto err_iounmap; + } + } - /* - * If the voltage domain debugfs directory is not created, do - * not try to create rest of the debugfs entries. - */ - vdd_dbg_dir = omap_voltage_get_dbgdir(sr_info->voltdm); - if (!vdd_dbg_dir) { - ret = -EINVAL; + name = kasprintf(GFP_KERNEL, "sr_%s", sr_info->voltdm->name); + if (!name) { + dev_err(&pdev->dev, "%s: Unable to alloc debugfs name\n", + __func__); + ret = -ENOMEM; goto err_iounmap; } - - sr_info->dbg_dir = debugfs_create_dir("smartreflex", vdd_dbg_dir); + sr_info->dbg_dir = debugfs_create_dir(name, sr_dbg_dir); + kfree(name); if (IS_ERR(sr_info->dbg_dir)) { dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n", __func__); diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index 10d3c5ee8018..eba9f9a8ab65 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -80,7 +80,7 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data, static int sr_dev_init(struct omap_hwmod *oh, void *user) { struct omap_sr_data *sr_data; - struct omap_device *od; + struct platform_device *pdev; struct omap_volt_data *volt_data; char *name = "smartreflex"; static int i; @@ -102,7 +102,7 @@ static int sr_dev_init(struct omap_hwmod *oh, void *user) sr_data->senn_mod = 0x1; sr_data->senp_mod = 0x1; - sr_data->voltdm = omap_voltage_domain_lookup(oh->vdd_name); + sr_data->voltdm = voltdm_lookup(oh->vdd_name); if (IS_ERR(sr_data->voltdm)) { pr_err("%s: Unable to get voltage domain pointer for VDD %s\n", __func__, oh->vdd_name); @@ -120,10 +120,10 @@ static int sr_dev_init(struct omap_hwmod *oh, void *user) sr_data->enable_on_init = sr_enable_on_init; - od = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data), + pdev = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data), omap_sr_latency, ARRAY_SIZE(omap_sr_latency), 0); - if (IS_ERR(od)) + if (IS_ERR(pdev)) pr_warning("%s: Could not build omap_device for %s: %s.\n\n", __func__, name, oh->name); exit: diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 1140e98c9773..e49fc7be2229 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -434,7 +434,7 @@ static int __init omap_timer_init(struct omap_hwmod *oh, void *unused) int ret = 0; char *name = "omap_timer"; struct dmtimer_platform_data *pdata; - struct omap_device *od; + struct platform_device *pdev; struct omap_timer_capability_dev_attr *timer_dev_attr; struct powerdomain *pwrdm; @@ -476,12 +476,12 @@ static int __init omap_timer_init(struct omap_hwmod *oh, void *unused) #ifdef CONFIG_PM pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count; #endif - od = omap_device_build(name, id, oh, pdata, sizeof(*pdata), + pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata), omap2_dmtimer_latency, ARRAY_SIZE(omap2_dmtimer_latency), 0); - if (IS_ERR(od)) { + if (IS_ERR(pdev)) { pr_err("%s: Can't build omap_device for %s: %s.\n", __func__, name, oh->name); ret = -EINVAL; diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index a65145b02a55..d86af3cda8c7 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -115,7 +115,6 @@ static struct omap_musb_board_data musb_default_board_data = { void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) { struct omap_hwmod *oh; - struct omap_device *od; struct platform_device *pdev; struct device *dev; int bus_id = -1; @@ -137,9 +136,6 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) musb_plat.mode = board_data->mode; musb_plat.extvbus = board_data->extvbus; - if (cpu_is_omap44xx()) - omap4430_phy_init(dev); - if (cpu_is_omap3517() || cpu_is_omap3505()) { oh_name = "am35x_otg_hs"; name = "musb-am35x"; @@ -148,22 +144,20 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) name = "musb-omap2430"; } - oh = omap_hwmod_lookup(oh_name); - if (!oh) { - pr_err("Could not look up %s\n", oh_name); - return; - } + oh = omap_hwmod_lookup(oh_name); + if (WARN(!oh, "%s: could not find omap_hwmod for %s\n", + __func__, oh_name)) + return; - od = omap_device_build(name, bus_id, oh, &musb_plat, + pdev = omap_device_build(name, bus_id, oh, &musb_plat, sizeof(musb_plat), omap_musb_latency, ARRAY_SIZE(omap_musb_latency), false); - if (IS_ERR(od)) { + if (IS_ERR(pdev)) { pr_err("Could not build omap_device for %s %s\n", name, oh_name); return; } - pdev = &od->pdev; dev = &pdev->dev; get_device(dev); dev->dma_mask = &musb_dmamask; diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c new file mode 100644 index 000000000000..031d116fbf10 --- /dev/null +++ b/arch/arm/mach-omap2/vc.c @@ -0,0 +1,367 @@ +/* + * OMAP Voltage Controller (VC) interface + * + * Copyright (C) 2011 Texas Instruments, Inc. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/init.h> + +#include <plat/cpu.h> + +#include "voltage.h" +#include "vc.h" +#include "prm-regbits-34xx.h" +#include "prm-regbits-44xx.h" +#include "prm44xx.h" + +/** + * struct omap_vc_channel_cfg - describe the cfg_channel bitfield + * @sa: bit for slave address + * @rav: bit for voltage configuration register + * @rac: bit for command configuration register + * @racen: enable bit for RAC + * @cmd: bit for command value set selection + * + * Channel configuration bits, common for OMAP3+ + * OMAP3 register: PRM_VC_CH_CONF + * OMAP4 register: PRM_VC_CFG_CHANNEL + * OMAP5 register: PRM_VC_SMPS_<voltdm>_CONFIG + */ +struct omap_vc_channel_cfg { + u8 sa; + u8 rav; + u8 rac; + u8 racen; + u8 cmd; +}; + +static struct omap_vc_channel_cfg vc_default_channel_cfg = { + .sa = BIT(0), + .rav = BIT(1), + .rac = BIT(2), + .racen = BIT(3), + .cmd = BIT(4), +}; + +/* + * On OMAP3+, all VC channels have the above default bitfield + * configuration, except the OMAP4 MPU channel. This appears + * to be a freak accident as every other VC channel has the + * default configuration, thus creating a mutant channel config. + */ +static struct omap_vc_channel_cfg vc_mutant_channel_cfg = { + .sa = BIT(0), + .rav = BIT(2), + .rac = BIT(3), + .racen = BIT(4), + .cmd = BIT(1), +}; + +static struct omap_vc_channel_cfg *vc_cfg_bits; +#define CFG_CHANNEL_MASK 0x1f + +/** + * omap_vc_config_channel - configure VC channel to PMIC mappings + * @voltdm: pointer to voltagdomain defining the desired VC channel + * + * Configures the VC channel to PMIC mappings for the following + * PMIC settings + * - i2c slave address (SA) + * - voltage configuration address (RAV) + * - command configuration address (RAC) and enable bit (RACEN) + * - command values for ON, ONLP, RET and OFF (CMD) + * + * This function currently only allows flexible configuration of the + * non-default channel. Starting with OMAP4, there are more than 2 + * channels, with one defined as the default (on OMAP4, it's MPU.) + * Only the non-default channel can be configured. + */ +static int omap_vc_config_channel(struct voltagedomain *voltdm) +{ + struct omap_vc_channel *vc = voltdm->vc; + + /* + * For default channel, the only configurable bit is RACEN. + * All others must stay at zero (see function comment above.) + */ + if (vc->flags & OMAP_VC_CHANNEL_DEFAULT) + vc->cfg_channel &= vc_cfg_bits->racen; + + voltdm->rmw(CFG_CHANNEL_MASK << vc->cfg_channel_sa_shift, + vc->cfg_channel << vc->cfg_channel_sa_shift, + vc->cfg_channel_reg); + + return 0; +} + +/* Voltage scale and accessory APIs */ +int omap_vc_pre_scale(struct voltagedomain *voltdm, + unsigned long target_volt, + u8 *target_vsel, u8 *current_vsel) +{ + struct omap_vc_channel *vc = voltdm->vc; + u32 vc_cmdval; + + /* Check if sufficient pmic info is available for this vdd */ + if (!voltdm->pmic) { + pr_err("%s: Insufficient pmic info to scale the vdd_%s\n", + __func__, voltdm->name); + return -EINVAL; + } + + if (!voltdm->pmic->uv_to_vsel) { + pr_err("%s: PMIC function to convert voltage in uV to" + "vsel not registered. Hence unable to scale voltage" + "for vdd_%s\n", __func__, voltdm->name); + return -ENODATA; + } + + if (!voltdm->read || !voltdm->write) { + pr_err("%s: No read/write API for accessing vdd_%s regs\n", + __func__, voltdm->name); + return -EINVAL; + } + + *target_vsel = voltdm->pmic->uv_to_vsel(target_volt); + *current_vsel = voltdm->pmic->uv_to_vsel(voltdm->nominal_volt); + + /* Setting the ON voltage to the new target voltage */ + vc_cmdval = voltdm->read(vc->cmdval_reg); + vc_cmdval &= ~vc->common->cmd_on_mask; + vc_cmdval |= (*target_vsel << vc->common->cmd_on_shift); + voltdm->write(vc_cmdval, vc->cmdval_reg); + + omap_vp_update_errorgain(voltdm, target_volt); + + return 0; +} + +void omap_vc_post_scale(struct voltagedomain *voltdm, + unsigned long target_volt, + u8 target_vsel, u8 current_vsel) +{ + u32 smps_steps = 0, smps_delay = 0; + + smps_steps = abs(target_vsel - current_vsel); + /* SMPS slew rate / step size. 2us added as buffer. */ + smps_delay = ((smps_steps * voltdm->pmic->step_size) / + voltdm->pmic->slew_rate) + 2; + udelay(smps_delay); +} + +/* vc_bypass_scale - VC bypass method of voltage scaling */ +int omap_vc_bypass_scale(struct voltagedomain *voltdm, + unsigned long target_volt) +{ + struct omap_vc_channel *vc = voltdm->vc; + u32 loop_cnt = 0, retries_cnt = 0; + u32 vc_valid, vc_bypass_val_reg, vc_bypass_value; + u8 target_vsel, current_vsel; + int ret; + + ret = omap_vc_pre_scale(voltdm, target_volt, &target_vsel, ¤t_vsel); + if (ret) + return ret; + + vc_valid = vc->common->valid; + vc_bypass_val_reg = vc->common->bypass_val_reg; + vc_bypass_value = (target_vsel << vc->common->data_shift) | + (vc->volt_reg_addr << vc->common->regaddr_shift) | + (vc->i2c_slave_addr << vc->common->slaveaddr_shift); + + voltdm->write(vc_bypass_value, vc_bypass_val_reg); + voltdm->write(vc_bypass_value | vc_valid, vc_bypass_val_reg); + + vc_bypass_value = voltdm->read(vc_bypass_val_reg); + /* + * Loop till the bypass command is acknowledged from the SMPS. + * NOTE: This is legacy code. The loop count and retry count needs + * to be revisited. + */ + while (!(vc_bypass_value & vc_valid)) { + loop_cnt++; + + if (retries_cnt > 10) { + pr_warning("%s: Retry count exceeded\n", __func__); + return -ETIMEDOUT; + } + + if (loop_cnt > 50) { + retries_cnt++; + loop_cnt = 0; + udelay(10); + } + vc_bypass_value = voltdm->read(vc_bypass_val_reg); + } + + omap_vc_post_scale(voltdm, target_volt, target_vsel, current_vsel); + return 0; +} + +static void __init omap3_vfsm_init(struct voltagedomain *voltdm) +{ + /* + * Voltage Manager FSM parameters init + * XXX This data should be passed in from the board file + */ + voltdm->write(OMAP3_CLKSETUP, OMAP3_PRM_CLKSETUP_OFFSET); + voltdm->write(OMAP3_VOLTOFFSET, OMAP3_PRM_VOLTOFFSET_OFFSET); + voltdm->write(OMAP3_VOLTSETUP2, OMAP3_PRM_VOLTSETUP2_OFFSET); +} + +static void __init omap3_vc_init_channel(struct voltagedomain *voltdm) +{ + static bool is_initialized; + + if (is_initialized) + return; + + omap3_vfsm_init(voltdm); + + is_initialized = true; +} + + +/* OMAP4 specific voltage init functions */ +static void __init omap4_vc_init_channel(struct voltagedomain *voltdm) +{ + static bool is_initialized; + u32 vc_val; + + if (is_initialized) + return; + + /* XXX These are magic numbers and do not belong! */ + vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT); + voltdm->write(vc_val, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET); + + is_initialized = true; +} + +/** + * omap_vc_i2c_init - initialize I2C interface to PMIC + * @voltdm: voltage domain containing VC data + * + * Use PMIC supplied seetings for I2C high-speed mode and + * master code (if set) and program the VC I2C configuration + * register. + * + * The VC I2C configuration is common to all VC channels, + * so this function only configures I2C for the first VC + * channel registers. All other VC channels will use the + * same configuration. + */ +static void __init omap_vc_i2c_init(struct voltagedomain *voltdm) +{ + struct omap_vc_channel *vc = voltdm->vc; + static bool initialized; + static bool i2c_high_speed; + u8 mcode; + + if (initialized) { + if (voltdm->pmic->i2c_high_speed != i2c_high_speed) + pr_warn("%s: I2C config for all channels must match.", + __func__); + return; + } + + i2c_high_speed = voltdm->pmic->i2c_high_speed; + if (i2c_high_speed) + voltdm->rmw(vc->common->i2c_cfg_hsen_mask, + vc->common->i2c_cfg_hsen_mask, + vc->common->i2c_cfg_reg); + + mcode = voltdm->pmic->i2c_mcode; + if (mcode) + voltdm->rmw(vc->common->i2c_mcode_mask, + mcode << __ffs(vc->common->i2c_mcode_mask), + vc->common->i2c_cfg_reg); + + initialized = true; +} + +void __init omap_vc_init_channel(struct voltagedomain *voltdm) +{ + struct omap_vc_channel *vc = voltdm->vc; + u8 on_vsel, onlp_vsel, ret_vsel, off_vsel; + u32 val; + + if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) { + pr_err("%s: PMIC info requried to configure vc for" + "vdd_%s not populated.Hence cannot initialize vc\n", + __func__, voltdm->name); + return; + } + + if (!voltdm->read || !voltdm->write) { + pr_err("%s: No read/write API for accessing vdd_%s regs\n", + __func__, voltdm->name); + return; + } + + vc->cfg_channel = 0; + if (vc->flags & OMAP_VC_CHANNEL_CFG_MUTANT) + vc_cfg_bits = &vc_mutant_channel_cfg; + else + vc_cfg_bits = &vc_default_channel_cfg; + + /* get PMIC/board specific settings */ + vc->i2c_slave_addr = voltdm->pmic->i2c_slave_addr; + vc->volt_reg_addr = voltdm->pmic->volt_reg_addr; + vc->cmd_reg_addr = voltdm->pmic->cmd_reg_addr; + vc->setup_time = voltdm->pmic->volt_setup_time; + + /* Configure the i2c slave address for this VC */ + voltdm->rmw(vc->smps_sa_mask, + vc->i2c_slave_addr << __ffs(vc->smps_sa_mask), + vc->smps_sa_reg); + vc->cfg_channel |= vc_cfg_bits->sa; + + /* + * Configure the PMIC register addresses. + */ + voltdm->rmw(vc->smps_volra_mask, + vc->volt_reg_addr << __ffs(vc->smps_volra_mask), + vc->smps_volra_reg); + vc->cfg_channel |= vc_cfg_bits->rav; + + if (vc->cmd_reg_addr) { + voltdm->rmw(vc->smps_cmdra_mask, + vc->cmd_reg_addr << __ffs(vc->smps_cmdra_mask), + vc->smps_cmdra_reg); + vc->cfg_channel |= vc_cfg_bits->rac | vc_cfg_bits->racen; + } + + /* Set up the on, inactive, retention and off voltage */ + on_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->on_volt); + onlp_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->onlp_volt); + ret_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->ret_volt); + off_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->off_volt); + val = ((on_vsel << vc->common->cmd_on_shift) | + (onlp_vsel << vc->common->cmd_onlp_shift) | + (ret_vsel << vc->common->cmd_ret_shift) | + (off_vsel << vc->common->cmd_off_shift)); + voltdm->write(val, vc->cmdval_reg); + vc->cfg_channel |= vc_cfg_bits->cmd; + + /* Channel configuration */ + omap_vc_config_channel(voltdm); + + /* Configure the setup times */ + voltdm->rmw(voltdm->vfsm->voltsetup_mask, + vc->setup_time << __ffs(voltdm->vfsm->voltsetup_mask), + voltdm->vfsm->voltsetup_reg); + + omap_vc_i2c_init(voltdm); + + if (cpu_is_omap34xx()) + omap3_vc_init_channel(voltdm); + else if (cpu_is_omap44xx()) + omap4_vc_init_channel(voltdm); +} + diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h index e7767771de49..478bf6b432c4 100644 --- a/arch/arm/mach-omap2/vc.h +++ b/arch/arm/mach-omap2/vc.h @@ -19,12 +19,12 @@ #include <linux/kernel.h> +struct voltagedomain; + /** - * struct omap_vc_common_data - per-VC register/bitfield data + * struct omap_vc_common - per-VC register/bitfield data * @cmd_on_mask: ON bitmask in PRM_VC_CMD_VAL* register * @valid: VALID bitmask in PRM_VC_BYPASS_VAL register - * @smps_sa_reg: Offset of PRM_VC_SMPS_SA reg from PRM start - * @smps_volra_reg: Offset of PRM_VC_SMPS_VOL_RA reg from PRM start * @bypass_val_reg: Offset of PRM_VC_BYPASS_VAL reg from PRM start * @data_shift: DATA field shift in PRM_VC_BYPASS_VAL register * @slaveaddr_shift: SLAVEADDR field shift in PRM_VC_BYPASS_VAL register @@ -33,15 +33,16 @@ * @cmd_onlp_shift: ONLP field shift in PRM_VC_CMD_VAL_* register * @cmd_ret_shift: RET field shift in PRM_VC_CMD_VAL_* register * @cmd_off_shift: OFF field shift in PRM_VC_CMD_VAL_* register + * @i2c_cfg_reg: I2C configuration register offset + * @i2c_cfg_hsen_mask: high-speed mode bit field mask in I2C config register + * @i2c_mcode_mask: MCODE field mask for I2C config register * * XXX One of cmd_on_mask and cmd_on_shift are not needed * XXX VALID should probably be a shift, not a mask */ -struct omap_vc_common_data { +struct omap_vc_common { u32 cmd_on_mask; u32 valid; - u8 smps_sa_reg; - u8 smps_volra_reg; u8 bypass_val_reg; u8 data_shift; u8 slaveaddr_shift; @@ -50,34 +51,75 @@ struct omap_vc_common_data { u8 cmd_onlp_shift; u8 cmd_ret_shift; u8 cmd_off_shift; + u8 i2c_cfg_reg; + u8 i2c_cfg_hsen_mask; + u8 i2c_mcode_mask; }; +/* omap_vc_channel.flags values */ +#define OMAP_VC_CHANNEL_DEFAULT BIT(0) +#define OMAP_VC_CHANNEL_CFG_MUTANT BIT(1) + /** - * struct omap_vc_instance_data - VC per-instance data - * @vc_common: pointer to VC common data for this platform - * @smps_sa_mask: SA* bitmask in the PRM_VC_SMPS_SA register - * @smps_volra_mask: VOLRA* bitmask in the PRM_VC_VOL_RA register - * @smps_sa_shift: SA* field shift in the PRM_VC_SMPS_SA register - * @smps_volra_shift: VOLRA* field shift in the PRM_VC_VOL_RA register + * struct omap_vc_channel - VC per-instance data + * @i2c_slave_addr: I2C slave address of PMIC for this VC channel + * @volt_reg_addr: voltage configuration register address + * @cmd_reg_addr: command configuration register address + * @setup_time: setup time (in sys_clk cycles) of regulator for this channel + * @cfg_channel: current value of VC channel configuration register + * @i2c_high_speed: whether or not to use I2C high-speed mode * - * XXX It is not necessary to have both a *_mask and a *_shift - - * remove one + * @common: pointer to VC common data for this platform + * @smps_sa_mask: i2c slave address bitmask in the PRM_VC_SMPS_SA register + * @smps_volra_mask: VOLRA* bitmask in the PRM_VC_VOL_RA register + * @smps_cmdra_mask: CMDRA* bitmask in the PRM_VC_CMD_RA register + * @cmdval_reg: register for on/ret/off voltage level values for this channel + * @smps_sa_reg: Offset of PRM_VC_SMPS_SA reg from PRM start + * @smps_volra_reg: Offset of PRM_VC_SMPS_VOL_RA reg from PRM start + * @smps_cmdra_reg: Offset of PRM_VC_SMPS_CMD_RA reg from PRM start + * @cfg_channel_reg: VC channel configuration register + * @cfg_channel_sa_shift: bit shift for slave address cfg_channel register + * @flags: VC channel-specific flags (optional) */ -struct omap_vc_instance_data { - const struct omap_vc_common_data *vc_common; +struct omap_vc_channel { + /* channel state */ + u16 i2c_slave_addr; + u16 volt_reg_addr; + u16 cmd_reg_addr; + u16 setup_time; + u8 cfg_channel; + bool i2c_high_speed; + + /* register access data */ + const struct omap_vc_common *common; u32 smps_sa_mask; u32 smps_volra_mask; + u32 smps_cmdra_mask; u8 cmdval_reg; - u8 smps_sa_shift; - u8 smps_volra_shift; + u8 smps_sa_reg; + u8 smps_volra_reg; + u8 smps_cmdra_reg; + u8 cfg_channel_reg; + u8 cfg_channel_sa_shift; + u8 flags; }; -extern struct omap_vc_instance_data omap3_vc1_data; -extern struct omap_vc_instance_data omap3_vc2_data; +extern struct omap_vc_channel omap3_vc_mpu; +extern struct omap_vc_channel omap3_vc_core; + +extern struct omap_vc_channel omap4_vc_mpu; +extern struct omap_vc_channel omap4_vc_iva; +extern struct omap_vc_channel omap4_vc_core; -extern struct omap_vc_instance_data omap4_vc_mpu_data; -extern struct omap_vc_instance_data omap4_vc_iva_data; -extern struct omap_vc_instance_data omap4_vc_core_data; +void omap_vc_init_channel(struct voltagedomain *voltdm); +int omap_vc_pre_scale(struct voltagedomain *voltdm, + unsigned long target_volt, + u8 *target_vsel, u8 *current_vsel); +void omap_vc_post_scale(struct voltagedomain *voltdm, + unsigned long target_volt, + u8 target_vsel, u8 current_vsel); +int omap_vc_bypass_scale(struct voltagedomain *voltdm, + unsigned long target_volt); #endif diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c index f37dc4bc379a..cfe348e1af0e 100644 --- a/arch/arm/mach-omap2/vc3xxx_data.c +++ b/arch/arm/mach-omap2/vc3xxx_data.c @@ -29,9 +29,7 @@ * VC data common to 34xx/36xx chips * XXX This stuff presumably belongs in the vc3xxx.c or vc.c file. */ -static struct omap_vc_common_data omap3_vc_common = { - .smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET, - .smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET, +static struct omap_vc_common omap3_vc_common = { .bypass_val_reg = OMAP3_PRM_VC_BYPASS_VAL_OFFSET, .data_shift = OMAP3430_DATA_SHIFT, .slaveaddr_shift = OMAP3430_SLAVEADDR_SHIFT, @@ -42,22 +40,33 @@ static struct omap_vc_common_data omap3_vc_common = { .cmd_onlp_shift = OMAP3430_VC_CMD_ONLP_SHIFT, .cmd_ret_shift = OMAP3430_VC_CMD_RET_SHIFT, .cmd_off_shift = OMAP3430_VC_CMD_OFF_SHIFT, + .i2c_cfg_hsen_mask = OMAP3430_HSEN_MASK, + .i2c_cfg_reg = OMAP3_PRM_VC_I2C_CFG_OFFSET, + .i2c_mcode_mask = OMAP3430_MCODE_MASK, }; -struct omap_vc_instance_data omap3_vc1_data = { - .vc_common = &omap3_vc_common, +struct omap_vc_channel omap3_vc_mpu = { + .common = &omap3_vc_common, + .smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET, + .smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET, + .smps_cmdra_reg = OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET, + .cfg_channel_reg = OMAP3_PRM_VC_CH_CONF_OFFSET, .cmdval_reg = OMAP3_PRM_VC_CMD_VAL_0_OFFSET, - .smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT, .smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA0_MASK, - .smps_volra_shift = OMAP3430_VOLRA0_SHIFT, .smps_volra_mask = OMAP3430_VOLRA0_MASK, + .smps_cmdra_mask = OMAP3430_CMDRA0_MASK, + .cfg_channel_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT, }; -struct omap_vc_instance_data omap3_vc2_data = { - .vc_common = &omap3_vc_common, +struct omap_vc_channel omap3_vc_core = { + .common = &omap3_vc_common, + .smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET, + .smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET, + .smps_cmdra_reg = OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET, + .cfg_channel_reg = OMAP3_PRM_VC_CH_CONF_OFFSET, .cmdval_reg = OMAP3_PRM_VC_CMD_VAL_1_OFFSET, - .smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT, .smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA1_MASK, - .smps_volra_shift = OMAP3430_VOLRA1_SHIFT, .smps_volra_mask = OMAP3430_VOLRA1_MASK, + .smps_cmdra_mask = OMAP3430_CMDRA1_MASK, + .cfg_channel_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT, }; diff --git a/arch/arm/mach-omap2/vc44xx_data.c b/arch/arm/mach-omap2/vc44xx_data.c index a98da8ddec52..2740a968145e 100644 --- a/arch/arm/mach-omap2/vc44xx_data.c +++ b/arch/arm/mach-omap2/vc44xx_data.c @@ -30,9 +30,7 @@ * VC data common to 44xx chips * XXX This stuff presumably belongs in the vc3xxx.c or vc.c file. */ -static const struct omap_vc_common_data omap4_vc_common = { - .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET, - .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET, +static const struct omap_vc_common omap4_vc_common = { .bypass_val_reg = OMAP4_PRM_VC_VAL_BYPASS_OFFSET, .data_shift = OMAP4430_DATA_SHIFT, .slaveaddr_shift = OMAP4430_SLAVEADDR_SHIFT, @@ -43,33 +41,49 @@ static const struct omap_vc_common_data omap4_vc_common = { .cmd_onlp_shift = OMAP4430_ONLP_SHIFT, .cmd_ret_shift = OMAP4430_RET_SHIFT, .cmd_off_shift = OMAP4430_OFF_SHIFT, + .i2c_cfg_reg = OMAP4_PRM_VC_CFG_I2C_MODE_OFFSET, + .i2c_cfg_hsen_mask = OMAP4430_HSMODEEN_MASK, + .i2c_mcode_mask = OMAP4430_HSMCODE_MASK, }; /* VC instance data for each controllable voltage line */ -struct omap_vc_instance_data omap4_vc_mpu_data = { - .vc_common = &omap4_vc_common, +struct omap_vc_channel omap4_vc_mpu = { + .flags = OMAP_VC_CHANNEL_DEFAULT | OMAP_VC_CHANNEL_CFG_MUTANT, + .common = &omap4_vc_common, + .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET, + .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET, + .smps_cmdra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET, + .cfg_channel_reg = OMAP4_PRM_VC_CFG_CHANNEL_OFFSET, .cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET, - .smps_sa_shift = OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_SHIFT, .smps_sa_mask = OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK, - .smps_volra_shift = OMAP4430_VOLRA_VDD_MPU_L_SHIFT, .smps_volra_mask = OMAP4430_VOLRA_VDD_MPU_L_MASK, + .smps_cmdra_mask = OMAP4430_CMDRA_VDD_MPU_L_MASK, + .cfg_channel_sa_shift = OMAP4430_SA_VDD_MPU_L_SHIFT, }; -struct omap_vc_instance_data omap4_vc_iva_data = { - .vc_common = &omap4_vc_common, +struct omap_vc_channel omap4_vc_iva = { + .common = &omap4_vc_common, + .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET, + .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET, + .smps_cmdra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET, + .cfg_channel_reg = OMAP4_PRM_VC_CFG_CHANNEL_OFFSET, .cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_IVA_L_OFFSET, - .smps_sa_shift = OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_SHIFT, .smps_sa_mask = OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK, - .smps_volra_shift = OMAP4430_VOLRA_VDD_IVA_L_SHIFT, .smps_volra_mask = OMAP4430_VOLRA_VDD_IVA_L_MASK, + .smps_cmdra_mask = OMAP4430_CMDRA_VDD_IVA_L_MASK, + .cfg_channel_sa_shift = OMAP4430_SA_VDD_IVA_L_SHIFT, }; -struct omap_vc_instance_data omap4_vc_core_data = { - .vc_common = &omap4_vc_common, +struct omap_vc_channel omap4_vc_core = { + .common = &omap4_vc_common, + .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET, + .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET, + .smps_cmdra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET, + .cfg_channel_reg = OMAP4_PRM_VC_CFG_CHANNEL_OFFSET, .cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_CORE_L_OFFSET, - .smps_sa_shift = OMAP4430_SA_VDD_CORE_L_0_6_SHIFT, .smps_sa_mask = OMAP4430_SA_VDD_CORE_L_0_6_MASK, - .smps_volra_shift = OMAP4430_VOLRA_VDD_CORE_L_SHIFT, .smps_volra_mask = OMAP4430_VOLRA_VDD_CORE_L_MASK, + .smps_cmdra_mask = OMAP4430_CMDRA_VDD_CORE_L_MASK, + .cfg_channel_sa_shift = OMAP4430_SA_VDD_CORE_L_SHIFT, }; diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 9ef3789ded4b..64070ac1e761 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -21,10 +21,10 @@ #include <linux/delay.h> #include <linux/io.h> -#include <linux/clk.h> #include <linux/err.h> #include <linux/debugfs.h> #include <linux/slab.h> +#include <linux/clk.h> #include <plat/common.h> @@ -36,839 +36,88 @@ #include "control.h" #include "voltage.h" +#include "powerdomain.h" #include "vc.h" #include "vp.h" -#define VOLTAGE_DIR_SIZE 16 - - -static struct omap_vdd_info **vdd_info; - -/* - * Number of scalable voltage domains. - */ -static int nr_scalable_vdd; - -/* XXX document */ -static s16 prm_mod_offs; -static s16 prm_irqst_ocp_mod_offs; - -static struct dentry *voltage_dir; - -/* Init function pointers */ -static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd, - unsigned long target_volt); - -static u32 omap3_voltage_read_reg(u16 mod, u8 offset) -{ - return omap2_prm_read_mod_reg(mod, offset); -} - -static void omap3_voltage_write_reg(u32 val, u16 mod, u8 offset) -{ - omap2_prm_write_mod_reg(val, mod, offset); -} - -static u32 omap4_voltage_read_reg(u16 mod, u8 offset) -{ - return omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION, - mod, offset); -} - -static void omap4_voltage_write_reg(u32 val, u16 mod, u8 offset) -{ - omap4_prminst_write_inst_reg(val, OMAP4430_PRM_PARTITION, mod, offset); -} - -static int __init _config_common_vdd_data(struct omap_vdd_info *vdd) -{ - char *sys_ck_name; - struct clk *sys_ck; - u32 sys_clk_speed, timeout_val, waittime; - - /* - * XXX Clockfw should handle this, or this should be in a - * struct record - */ - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - sys_ck_name = "sys_ck"; - else if (cpu_is_omap44xx()) - sys_ck_name = "sys_clkin_ck"; - else - return -EINVAL; - - /* - * Sys clk rate is require to calculate vp timeout value and - * smpswaittimemin and smpswaittimemax. - */ - sys_ck = clk_get(NULL, sys_ck_name); - if (IS_ERR(sys_ck)) { - pr_warning("%s: Could not get the sys clk to calculate" - "various vdd_%s params\n", __func__, vdd->voltdm.name); - return -EINVAL; - } - sys_clk_speed = clk_get_rate(sys_ck); - clk_put(sys_ck); - /* Divide to avoid overflow */ - sys_clk_speed /= 1000; - - /* Generic voltage parameters */ - vdd->volt_scale = vp_forceupdate_scale_voltage; - vdd->vp_enabled = false; - - vdd->vp_rt_data.vpconfig_erroroffset = - (vdd->pmic_info->vp_erroroffset << - vdd->vp_data->vp_common->vpconfig_erroroffset_shift); - - timeout_val = (sys_clk_speed * vdd->pmic_info->vp_timeout_us) / 1000; - vdd->vp_rt_data.vlimitto_timeout = timeout_val; - vdd->vp_rt_data.vlimitto_vddmin = vdd->pmic_info->vp_vddmin; - vdd->vp_rt_data.vlimitto_vddmax = vdd->pmic_info->vp_vddmax; - - waittime = ((vdd->pmic_info->step_size / vdd->pmic_info->slew_rate) * - sys_clk_speed) / 1000; - vdd->vp_rt_data.vstepmin_smpswaittimemin = waittime; - vdd->vp_rt_data.vstepmax_smpswaittimemax = waittime; - vdd->vp_rt_data.vstepmin_stepmin = vdd->pmic_info->vp_vstepmin; - vdd->vp_rt_data.vstepmax_stepmax = vdd->pmic_info->vp_vstepmax; - - return 0; -} - -/* Voltage debugfs support */ -static int vp_volt_debug_get(void *data, u64 *val) -{ - struct omap_vdd_info *vdd = (struct omap_vdd_info *) data; - u8 vsel; - - if (!vdd) { - pr_warning("Wrong paramater passed\n"); - return -EINVAL; - } - - vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage); - - if (!vdd->pmic_info->vsel_to_uv) { - pr_warning("PMIC function to convert vsel to voltage" - "in uV not registerd\n"); - return -EINVAL; - } - - *val = vdd->pmic_info->vsel_to_uv(vsel); - return 0; -} - -static int nom_volt_debug_get(void *data, u64 *val) -{ - struct omap_vdd_info *vdd = (struct omap_vdd_info *) data; - - if (!vdd) { - pr_warning("Wrong paramater passed\n"); - return -EINVAL; - } - - *val = omap_voltage_get_nom_volt(&vdd->voltdm); - - return 0; -} - -DEFINE_SIMPLE_ATTRIBUTE(vp_volt_debug_fops, vp_volt_debug_get, NULL, "%llu\n"); -DEFINE_SIMPLE_ATTRIBUTE(nom_volt_debug_fops, nom_volt_debug_get, NULL, - "%llu\n"); -static void vp_latch_vsel(struct omap_vdd_info *vdd) -{ - u32 vpconfig; - unsigned long uvdc; - char vsel; - - uvdc = omap_voltage_get_nom_volt(&vdd->voltdm); - if (!uvdc) { - pr_warning("%s: unable to find current voltage for vdd_%s\n", - __func__, vdd->voltdm.name); - return; - } - - if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) { - pr_warning("%s: PMIC function to convert voltage in uV to" - " vsel not registered\n", __func__); - return; - } - - vsel = vdd->pmic_info->uv_to_vsel(uvdc); - - vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig); - vpconfig &= ~(vdd->vp_data->vp_common->vpconfig_initvoltage_mask | - vdd->vp_data->vp_common->vpconfig_initvdd); - vpconfig |= vsel << vdd->vp_data->vp_common->vpconfig_initvoltage_shift; - - vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); - - /* Trigger initVDD value copy to voltage processor */ - vdd->write_reg((vpconfig | vdd->vp_data->vp_common->vpconfig_initvdd), - prm_mod_offs, vdd->vp_data->vpconfig); - - /* Clear initVDD copy trigger bit */ - vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); -} - -/* Generic voltage init functions */ -static void __init vp_init(struct omap_vdd_info *vdd) -{ - u32 vp_val; - - if (!vdd->read_reg || !vdd->write_reg) { - pr_err("%s: No read/write API for accessing vdd_%s regs\n", - __func__, vdd->voltdm.name); - return; - } - - vp_val = vdd->vp_rt_data.vpconfig_erroroffset | - (vdd->vp_rt_data.vpconfig_errorgain << - vdd->vp_data->vp_common->vpconfig_errorgain_shift) | - vdd->vp_data->vp_common->vpconfig_timeouten; - vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vpconfig); - - vp_val = ((vdd->vp_rt_data.vstepmin_smpswaittimemin << - vdd->vp_data->vp_common->vstepmin_smpswaittimemin_shift) | - (vdd->vp_rt_data.vstepmin_stepmin << - vdd->vp_data->vp_common->vstepmin_stepmin_shift)); - vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vstepmin); - - vp_val = ((vdd->vp_rt_data.vstepmax_smpswaittimemax << - vdd->vp_data->vp_common->vstepmax_smpswaittimemax_shift) | - (vdd->vp_rt_data.vstepmax_stepmax << - vdd->vp_data->vp_common->vstepmax_stepmax_shift)); - vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vstepmax); - - vp_val = ((vdd->vp_rt_data.vlimitto_vddmax << - vdd->vp_data->vp_common->vlimitto_vddmax_shift) | - (vdd->vp_rt_data.vlimitto_vddmin << - vdd->vp_data->vp_common->vlimitto_vddmin_shift) | - (vdd->vp_rt_data.vlimitto_timeout << - vdd->vp_data->vp_common->vlimitto_timeout_shift)); - vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vlimitto); -} - -static void __init vdd_debugfs_init(struct omap_vdd_info *vdd) -{ - char *name; - - name = kzalloc(VOLTAGE_DIR_SIZE, GFP_KERNEL); - if (!name) { - pr_warning("%s: Unable to allocate memory for debugfs" - " directory name for vdd_%s", - __func__, vdd->voltdm.name); - return; - } - strcpy(name, "vdd_"); - strcat(name, vdd->voltdm.name); - - vdd->debug_dir = debugfs_create_dir(name, voltage_dir); - kfree(name); - if (IS_ERR(vdd->debug_dir)) { - pr_warning("%s: Unable to create debugfs directory for" - " vdd_%s\n", __func__, vdd->voltdm.name); - vdd->debug_dir = NULL; - return; - } - - (void) debugfs_create_x16("vp_errorgain", S_IRUGO, vdd->debug_dir, - &(vdd->vp_rt_data.vpconfig_errorgain)); - (void) debugfs_create_x16("vp_smpswaittimemin", S_IRUGO, - vdd->debug_dir, - &(vdd->vp_rt_data.vstepmin_smpswaittimemin)); - (void) debugfs_create_x8("vp_stepmin", S_IRUGO, vdd->debug_dir, - &(vdd->vp_rt_data.vstepmin_stepmin)); - (void) debugfs_create_x16("vp_smpswaittimemax", S_IRUGO, - vdd->debug_dir, - &(vdd->vp_rt_data.vstepmax_smpswaittimemax)); - (void) debugfs_create_x8("vp_stepmax", S_IRUGO, vdd->debug_dir, - &(vdd->vp_rt_data.vstepmax_stepmax)); - (void) debugfs_create_x8("vp_vddmax", S_IRUGO, vdd->debug_dir, - &(vdd->vp_rt_data.vlimitto_vddmax)); - (void) debugfs_create_x8("vp_vddmin", S_IRUGO, vdd->debug_dir, - &(vdd->vp_rt_data.vlimitto_vddmin)); - (void) debugfs_create_x16("vp_timeout", S_IRUGO, vdd->debug_dir, - &(vdd->vp_rt_data.vlimitto_timeout)); - (void) debugfs_create_file("curr_vp_volt", S_IRUGO, vdd->debug_dir, - (void *) vdd, &vp_volt_debug_fops); - (void) debugfs_create_file("curr_nominal_volt", S_IRUGO, - vdd->debug_dir, (void *) vdd, - &nom_volt_debug_fops); -} - -/* Voltage scale and accessory APIs */ -static int _pre_volt_scale(struct omap_vdd_info *vdd, - unsigned long target_volt, u8 *target_vsel, u8 *current_vsel) -{ - struct omap_volt_data *volt_data; - const struct omap_vc_common_data *vc_common; - const struct omap_vp_common_data *vp_common; - u32 vc_cmdval, vp_errgain_val; - - vc_common = vdd->vc_data->vc_common; - vp_common = vdd->vp_data->vp_common; - - /* Check if suffiecient pmic info is available for this vdd */ - if (!vdd->pmic_info) { - pr_err("%s: Insufficient pmic info to scale the vdd_%s\n", - __func__, vdd->voltdm.name); - return -EINVAL; - } - - if (!vdd->pmic_info->uv_to_vsel) { - pr_err("%s: PMIC function to convert voltage in uV to" - "vsel not registered. Hence unable to scale voltage" - "for vdd_%s\n", __func__, vdd->voltdm.name); - return -ENODATA; - } - - if (!vdd->read_reg || !vdd->write_reg) { - pr_err("%s: No read/write API for accessing vdd_%s regs\n", - __func__, vdd->voltdm.name); - return -EINVAL; - } - - /* Get volt_data corresponding to target_volt */ - volt_data = omap_voltage_get_voltdata(&vdd->voltdm, target_volt); - if (IS_ERR(volt_data)) - volt_data = NULL; - - *target_vsel = vdd->pmic_info->uv_to_vsel(target_volt); - *current_vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage); - - /* Setting the ON voltage to the new target voltage */ - vc_cmdval = vdd->read_reg(prm_mod_offs, vdd->vc_data->cmdval_reg); - vc_cmdval &= ~vc_common->cmd_on_mask; - vc_cmdval |= (*target_vsel << vc_common->cmd_on_shift); - vdd->write_reg(vc_cmdval, prm_mod_offs, vdd->vc_data->cmdval_reg); - - /* Setting vp errorgain based on the voltage */ - if (volt_data) { - vp_errgain_val = vdd->read_reg(prm_mod_offs, - vdd->vp_data->vpconfig); - vdd->vp_rt_data.vpconfig_errorgain = volt_data->vp_errgain; - vp_errgain_val &= ~vp_common->vpconfig_errorgain_mask; - vp_errgain_val |= vdd->vp_rt_data.vpconfig_errorgain << - vp_common->vpconfig_errorgain_shift; - vdd->write_reg(vp_errgain_val, prm_mod_offs, - vdd->vp_data->vpconfig); - } - - return 0; -} - -static void _post_volt_scale(struct omap_vdd_info *vdd, - unsigned long target_volt, u8 target_vsel, u8 current_vsel) -{ - u32 smps_steps = 0, smps_delay = 0; - - smps_steps = abs(target_vsel - current_vsel); - /* SMPS slew rate / step size. 2us added as buffer. */ - smps_delay = ((smps_steps * vdd->pmic_info->step_size) / - vdd->pmic_info->slew_rate) + 2; - udelay(smps_delay); - - vdd->curr_volt = target_volt; -} - -/* vc_bypass_scale_voltage - VC bypass method of voltage scaling */ -static int vc_bypass_scale_voltage(struct omap_vdd_info *vdd, - unsigned long target_volt) -{ - u32 loop_cnt = 0, retries_cnt = 0; - u32 vc_valid, vc_bypass_val_reg, vc_bypass_value; - u8 target_vsel, current_vsel; - int ret; - - ret = _pre_volt_scale(vdd, target_volt, &target_vsel, ¤t_vsel); - if (ret) - return ret; - - vc_valid = vdd->vc_data->vc_common->valid; - vc_bypass_val_reg = vdd->vc_data->vc_common->bypass_val_reg; - vc_bypass_value = (target_vsel << vdd->vc_data->vc_common->data_shift) | - (vdd->pmic_info->pmic_reg << - vdd->vc_data->vc_common->regaddr_shift) | - (vdd->pmic_info->i2c_slave_addr << - vdd->vc_data->vc_common->slaveaddr_shift); - - vdd->write_reg(vc_bypass_value, prm_mod_offs, vc_bypass_val_reg); - vdd->write_reg(vc_bypass_value | vc_valid, prm_mod_offs, - vc_bypass_val_reg); - - vc_bypass_value = vdd->read_reg(prm_mod_offs, vc_bypass_val_reg); - /* - * Loop till the bypass command is acknowledged from the SMPS. - * NOTE: This is legacy code. The loop count and retry count needs - * to be revisited. - */ - while (!(vc_bypass_value & vc_valid)) { - loop_cnt++; - - if (retries_cnt > 10) { - pr_warning("%s: Retry count exceeded\n", __func__); - return -ETIMEDOUT; - } - - if (loop_cnt > 50) { - retries_cnt++; - loop_cnt = 0; - udelay(10); - } - vc_bypass_value = vdd->read_reg(prm_mod_offs, - vc_bypass_val_reg); - } - - _post_volt_scale(vdd, target_volt, target_vsel, current_vsel); - return 0; -} - -/* VP force update method of voltage scaling */ -static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd, - unsigned long target_volt) -{ - u32 vpconfig; - u8 target_vsel, current_vsel, prm_irqst_reg; - int ret, timeout = 0; - - ret = _pre_volt_scale(vdd, target_volt, &target_vsel, ¤t_vsel); - if (ret) - return ret; - - prm_irqst_reg = vdd->vp_data->prm_irqst_data->prm_irqst_reg; - - /* - * Clear all pending TransactionDone interrupt/status. Typical latency - * is <3us - */ - while (timeout++ < VP_TRANXDONE_TIMEOUT) { - vdd->write_reg(vdd->vp_data->prm_irqst_data->tranxdone_status, - prm_irqst_ocp_mod_offs, prm_irqst_reg); - if (!(vdd->read_reg(prm_irqst_ocp_mod_offs, prm_irqst_reg) & - vdd->vp_data->prm_irqst_data->tranxdone_status)) - break; - udelay(1); - } - if (timeout >= VP_TRANXDONE_TIMEOUT) { - pr_warning("%s: vdd_%s TRANXDONE timeout exceeded." - "Voltage change aborted", __func__, vdd->voltdm.name); - return -ETIMEDOUT; - } - - /* Configure for VP-Force Update */ - vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig); - vpconfig &= ~(vdd->vp_data->vp_common->vpconfig_initvdd | - vdd->vp_data->vp_common->vpconfig_forceupdate | - vdd->vp_data->vp_common->vpconfig_initvoltage_mask); - vpconfig |= ((target_vsel << - vdd->vp_data->vp_common->vpconfig_initvoltage_shift)); - vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); - - /* Trigger initVDD value copy to voltage processor */ - vpconfig |= vdd->vp_data->vp_common->vpconfig_initvdd; - vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); - - /* Force update of voltage */ - vpconfig |= vdd->vp_data->vp_common->vpconfig_forceupdate; - vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); - - /* - * Wait for TransactionDone. Typical latency is <200us. - * Depends on SMPSWAITTIMEMIN/MAX and voltage change - */ - timeout = 0; - omap_test_timeout((vdd->read_reg(prm_irqst_ocp_mod_offs, prm_irqst_reg) & - vdd->vp_data->prm_irqst_data->tranxdone_status), - VP_TRANXDONE_TIMEOUT, timeout); - if (timeout >= VP_TRANXDONE_TIMEOUT) - pr_err("%s: vdd_%s TRANXDONE timeout exceeded." - "TRANXDONE never got set after the voltage update\n", - __func__, vdd->voltdm.name); - - _post_volt_scale(vdd, target_volt, target_vsel, current_vsel); - - /* - * Disable TransactionDone interrupt , clear all status, clear - * control registers - */ - timeout = 0; - while (timeout++ < VP_TRANXDONE_TIMEOUT) { - vdd->write_reg(vdd->vp_data->prm_irqst_data->tranxdone_status, - prm_irqst_ocp_mod_offs, prm_irqst_reg); - if (!(vdd->read_reg(prm_irqst_ocp_mod_offs, prm_irqst_reg) & - vdd->vp_data->prm_irqst_data->tranxdone_status)) - break; - udelay(1); - } - - if (timeout >= VP_TRANXDONE_TIMEOUT) - pr_warning("%s: vdd_%s TRANXDONE timeout exceeded while trying" - "to clear the TRANXDONE status\n", - __func__, vdd->voltdm.name); - - vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig); - /* Clear initVDD copy trigger bit */ - vpconfig &= ~vdd->vp_data->vp_common->vpconfig_initvdd; - vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); - /* Clear force bit */ - vpconfig &= ~vdd->vp_data->vp_common->vpconfig_forceupdate; - vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); - - return 0; -} - -static void __init omap3_vfsm_init(struct omap_vdd_info *vdd) -{ - /* - * Voltage Manager FSM parameters init - * XXX This data should be passed in from the board file - */ - vdd->write_reg(OMAP3_CLKSETUP, prm_mod_offs, OMAP3_PRM_CLKSETUP_OFFSET); - vdd->write_reg(OMAP3_VOLTOFFSET, prm_mod_offs, - OMAP3_PRM_VOLTOFFSET_OFFSET); - vdd->write_reg(OMAP3_VOLTSETUP2, prm_mod_offs, - OMAP3_PRM_VOLTSETUP2_OFFSET); -} - -static void __init omap3_vc_init(struct omap_vdd_info *vdd) -{ - static bool is_initialized; - u8 on_vsel, onlp_vsel, ret_vsel, off_vsel; - u32 vc_val; - - if (is_initialized) - return; - - /* Set up the on, inactive, retention and off voltage */ - on_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->on_volt); - onlp_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->onlp_volt); - ret_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->ret_volt); - off_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->off_volt); - vc_val = ((on_vsel << vdd->vc_data->vc_common->cmd_on_shift) | - (onlp_vsel << vdd->vc_data->vc_common->cmd_onlp_shift) | - (ret_vsel << vdd->vc_data->vc_common->cmd_ret_shift) | - (off_vsel << vdd->vc_data->vc_common->cmd_off_shift)); - vdd->write_reg(vc_val, prm_mod_offs, vdd->vc_data->cmdval_reg); - - /* - * Generic VC parameters init - * XXX This data should be abstracted out - */ - vdd->write_reg(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, prm_mod_offs, - OMAP3_PRM_VC_CH_CONF_OFFSET); - vdd->write_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, prm_mod_offs, - OMAP3_PRM_VC_I2C_CFG_OFFSET); - - omap3_vfsm_init(vdd); - - is_initialized = true; -} - - -/* OMAP4 specific voltage init functions */ -static void __init omap4_vc_init(struct omap_vdd_info *vdd) -{ - static bool is_initialized; - u32 vc_val; - - if (is_initialized) - return; - - /* TODO: Configure setup times and CMD_VAL values*/ - - /* - * Generic VC parameters init - * XXX This data should be abstracted out - */ - vc_val = (OMAP4430_RAV_VDD_MPU_L_MASK | OMAP4430_CMD_VDD_MPU_L_MASK | - OMAP4430_RAV_VDD_IVA_L_MASK | OMAP4430_CMD_VDD_IVA_L_MASK | - OMAP4430_RAV_VDD_CORE_L_MASK | OMAP4430_CMD_VDD_CORE_L_MASK); - vdd->write_reg(vc_val, prm_mod_offs, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET); - - /* XXX These are magic numbers and do not belong! */ - vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT); - vdd->write_reg(vc_val, prm_mod_offs, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET); - - is_initialized = true; -} - -static void __init omap_vc_init(struct omap_vdd_info *vdd) -{ - u32 vc_val; - - if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) { - pr_err("%s: PMIC info requried to configure vc for" - "vdd_%s not populated.Hence cannot initialize vc\n", - __func__, vdd->voltdm.name); - return; - } - - if (!vdd->read_reg || !vdd->write_reg) { - pr_err("%s: No read/write API for accessing vdd_%s regs\n", - __func__, vdd->voltdm.name); - return; - } - - /* Set up the SMPS_SA(i2c slave address in VC */ - vc_val = vdd->read_reg(prm_mod_offs, - vdd->vc_data->vc_common->smps_sa_reg); - vc_val &= ~vdd->vc_data->smps_sa_mask; - vc_val |= vdd->pmic_info->i2c_slave_addr << vdd->vc_data->smps_sa_shift; - vdd->write_reg(vc_val, prm_mod_offs, - vdd->vc_data->vc_common->smps_sa_reg); - - /* Setup the VOLRA(pmic reg addr) in VC */ - vc_val = vdd->read_reg(prm_mod_offs, - vdd->vc_data->vc_common->smps_volra_reg); - vc_val &= ~vdd->vc_data->smps_volra_mask; - vc_val |= vdd->pmic_info->pmic_reg << vdd->vc_data->smps_volra_shift; - vdd->write_reg(vc_val, prm_mod_offs, - vdd->vc_data->vc_common->smps_volra_reg); - - /* Configure the setup times */ - vc_val = vdd->read_reg(prm_mod_offs, vdd->vfsm->voltsetup_reg); - vc_val &= ~vdd->vfsm->voltsetup_mask; - vc_val |= vdd->pmic_info->volt_setup_time << - vdd->vfsm->voltsetup_shift; - vdd->write_reg(vc_val, prm_mod_offs, vdd->vfsm->voltsetup_reg); - - if (cpu_is_omap34xx()) - omap3_vc_init(vdd); - else if (cpu_is_omap44xx()) - omap4_vc_init(vdd); -} - -static int __init omap_vdd_data_configure(struct omap_vdd_info *vdd) -{ - int ret = -EINVAL; - - if (!vdd->pmic_info) { - pr_err("%s: PMIC info requried to configure vdd_%s not" - "populated.Hence cannot initialize vdd_%s\n", - __func__, vdd->voltdm.name, vdd->voltdm.name); - goto ovdc_out; - } - - if (IS_ERR_VALUE(_config_common_vdd_data(vdd))) - goto ovdc_out; - - if (cpu_is_omap34xx()) { - vdd->read_reg = omap3_voltage_read_reg; - vdd->write_reg = omap3_voltage_write_reg; - ret = 0; - } else if (cpu_is_omap44xx()) { - vdd->read_reg = omap4_voltage_read_reg; - vdd->write_reg = omap4_voltage_write_reg; - ret = 0; - } - -ovdc_out: - return ret; -} +static LIST_HEAD(voltdm_list); /* Public functions */ /** - * omap_voltage_get_nom_volt() - Gets the current non-auto-compensated voltage - * @voltdm: pointer to the VDD for which current voltage info is needed + * voltdm_get_voltage() - Gets the current non-auto-compensated voltage + * @voltdm: pointer to the voltdm for which current voltage info is needed * - * API to get the current non-auto-compensated voltage for a VDD. - * Returns 0 in case of error else returns the current voltage for the VDD. + * API to get the current non-auto-compensated voltage for a voltage domain. + * Returns 0 in case of error else returns the current voltage. */ -unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm) +unsigned long voltdm_get_voltage(struct voltagedomain *voltdm) { - struct omap_vdd_info *vdd; - if (!voltdm || IS_ERR(voltdm)) { pr_warning("%s: VDD specified does not exist!\n", __func__); return 0; } - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); - - return vdd->curr_volt; + return voltdm->nominal_volt; } /** - * omap_vp_get_curr_volt() - API to get the current vp voltage. - * @voltdm: pointer to the VDD. - * - * This API returns the current voltage for the specified voltage processor - */ -unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm) -{ - struct omap_vdd_info *vdd; - u8 curr_vsel; - - if (!voltdm || IS_ERR(voltdm)) { - pr_warning("%s: VDD specified does not exist!\n", __func__); - return 0; - } - - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); - if (!vdd->read_reg) { - pr_err("%s: No read API for reading vdd_%s regs\n", - __func__, voltdm->name); - return 0; - } - - curr_vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage); - - if (!vdd->pmic_info || !vdd->pmic_info->vsel_to_uv) { - pr_warning("%s: PMIC function to convert vsel to voltage" - "in uV not registerd\n", __func__); - return 0; - } - - return vdd->pmic_info->vsel_to_uv(curr_vsel); -} - -/** - * omap_vp_enable() - API to enable a particular VP - * @voltdm: pointer to the VDD whose VP is to be enabled. - * - * This API enables a particular voltage processor. Needed by the smartreflex - * class drivers. - */ -void omap_vp_enable(struct voltagedomain *voltdm) -{ - struct omap_vdd_info *vdd; - u32 vpconfig; - - if (!voltdm || IS_ERR(voltdm)) { - pr_warning("%s: VDD specified does not exist!\n", __func__); - return; - } - - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); - if (!vdd->read_reg || !vdd->write_reg) { - pr_err("%s: No read/write API for accessing vdd_%s regs\n", - __func__, voltdm->name); - return; - } - - /* If VP is already enabled, do nothing. Return */ - if (vdd->vp_enabled) - return; - - vp_latch_vsel(vdd); - - /* Enable VP */ - vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig); - vpconfig |= vdd->vp_data->vp_common->vpconfig_vpenable; - vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); - vdd->vp_enabled = true; -} - -/** - * omap_vp_disable() - API to disable a particular VP - * @voltdm: pointer to the VDD whose VP is to be disabled. - * - * This API disables a particular voltage processor. Needed by the smartreflex - * class drivers. - */ -void omap_vp_disable(struct voltagedomain *voltdm) -{ - struct omap_vdd_info *vdd; - u32 vpconfig; - int timeout; - - if (!voltdm || IS_ERR(voltdm)) { - pr_warning("%s: VDD specified does not exist!\n", __func__); - return; - } - - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); - if (!vdd->read_reg || !vdd->write_reg) { - pr_err("%s: No read/write API for accessing vdd_%s regs\n", - __func__, voltdm->name); - return; - } - - /* If VP is already disabled, do nothing. Return */ - if (!vdd->vp_enabled) { - pr_warning("%s: Trying to disable VP for vdd_%s when" - "it is already disabled\n", __func__, voltdm->name); - return; - } - - /* Disable VP */ - vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig); - vpconfig &= ~vdd->vp_data->vp_common->vpconfig_vpenable; - vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); - - /* - * Wait for VP idle Typical latency is <2us. Maximum latency is ~100us - */ - omap_test_timeout((vdd->read_reg(prm_mod_offs, vdd->vp_data->vstatus)), - VP_IDLE_TIMEOUT, timeout); - - if (timeout >= VP_IDLE_TIMEOUT) - pr_warning("%s: vdd_%s idle timedout\n", - __func__, voltdm->name); - - vdd->vp_enabled = false; - - return; -} - -/** - * omap_voltage_scale_vdd() - API to scale voltage of a particular - * voltage domain. - * @voltdm: pointer to the VDD which is to be scaled. - * @target_volt: The target voltage of the voltage domain + * voltdm_scale() - API to scale voltage of a particular voltage domain. + * @voltdm: pointer to the voltage domain which is to be scaled. + * @target_volt: The target voltage of the voltage domain * * This API should be called by the kernel to do the voltage scaling - * for a particular voltage domain during dvfs or any other situation. + * for a particular voltage domain during DVFS. */ -int omap_voltage_scale_vdd(struct voltagedomain *voltdm, - unsigned long target_volt) +int voltdm_scale(struct voltagedomain *voltdm, + unsigned long target_volt) { - struct omap_vdd_info *vdd; + int ret; if (!voltdm || IS_ERR(voltdm)) { pr_warning("%s: VDD specified does not exist!\n", __func__); return -EINVAL; } - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); - - if (!vdd->volt_scale) { + if (!voltdm->scale) { pr_err("%s: No voltage scale API registered for vdd_%s\n", __func__, voltdm->name); return -ENODATA; } - return vdd->volt_scale(vdd, target_volt); + ret = voltdm->scale(voltdm, target_volt); + if (!ret) + voltdm->nominal_volt = target_volt; + + return ret; } /** - * omap_voltage_reset() - Resets the voltage of a particular voltage domain - * to that of the current OPP. - * @voltdm: pointer to the VDD whose voltage is to be reset. + * voltdm_reset() - Resets the voltage of a particular voltage domain + * to that of the current OPP. + * @voltdm: pointer to the voltage domain whose voltage is to be reset. * * This API finds out the correct voltage the voltage domain is supposed * to be at and resets the voltage to that level. Should be used especially * while disabling any voltage compensation modules. */ -void omap_voltage_reset(struct voltagedomain *voltdm) +void voltdm_reset(struct voltagedomain *voltdm) { - unsigned long target_uvdc; + unsigned long target_volt; if (!voltdm || IS_ERR(voltdm)) { pr_warning("%s: VDD specified does not exist!\n", __func__); return; } - target_uvdc = omap_voltage_get_nom_volt(voltdm); - if (!target_uvdc) { + target_volt = voltdm_get_voltage(voltdm); + if (!target_volt) { pr_err("%s: unable to find current voltage for vdd_%s\n", __func__, voltdm->name); return; } - omap_voltage_scale_vdd(voltdm, target_uvdc); + voltdm_scale(voltdm, target_volt); } /** @@ -884,18 +133,14 @@ void omap_voltage_reset(struct voltagedomain *voltdm) * */ void omap_voltage_get_volttable(struct voltagedomain *voltdm, - struct omap_volt_data **volt_data) + struct omap_volt_data **volt_data) { - struct omap_vdd_info *vdd; - if (!voltdm || IS_ERR(voltdm)) { pr_warning("%s: VDD specified does not exist!\n", __func__); return; } - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); - - *volt_data = vdd->volt_data; + *volt_data = voltdm->volt_data; } /** @@ -914,9 +159,8 @@ void omap_voltage_get_volttable(struct voltagedomain *voltdm, * domain or if there is no matching entry. */ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, - unsigned long volt) + unsigned long volt) { - struct omap_vdd_info *vdd; int i; if (!voltdm || IS_ERR(voltdm)) { @@ -924,17 +168,15 @@ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, return ERR_PTR(-EINVAL); } - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); - - if (!vdd->volt_data) { + if (!voltdm->volt_data) { pr_warning("%s: voltage table does not exist for vdd_%s\n", __func__, voltdm->name); return ERR_PTR(-ENODATA); } - for (i = 0; vdd->volt_data[i].volt_nominal != 0; i++) { - if (vdd->volt_data[i].volt_nominal == volt) - return &vdd->volt_data[i]; + for (i = 0; voltdm->volt_data[i].volt_nominal != 0; i++) { + if (voltdm->volt_data[i].volt_nominal == volt) + return &voltdm->volt_data[i]; } pr_notice("%s: Unable to match the current voltage with the voltage" @@ -947,54 +189,25 @@ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, * omap_voltage_register_pmic() - API to register PMIC specific data * @voltdm: pointer to the VDD for which the PMIC specific data is * to be registered - * @pmic_info: the structure containing pmic info + * @pmic: the structure containing pmic info * * This API is to be called by the SOC/PMIC file to specify the - * pmic specific info as present in omap_volt_pmic_info structure. + * pmic specific info as present in omap_voltdm_pmic structure. */ int omap_voltage_register_pmic(struct voltagedomain *voltdm, - struct omap_volt_pmic_info *pmic_info) + struct omap_voltdm_pmic *pmic) { - struct omap_vdd_info *vdd; - if (!voltdm || IS_ERR(voltdm)) { pr_warning("%s: VDD specified does not exist!\n", __func__); return -EINVAL; } - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); - - vdd->pmic_info = pmic_info; + voltdm->pmic = pmic; return 0; } /** - * omap_voltage_get_dbgdir() - API to get pointer to the debugfs directory - * corresponding to a voltage domain. - * - * @voltdm: pointer to the VDD whose debug directory is required. - * - * This API returns pointer to the debugfs directory corresponding - * to the voltage domain. Should be used by drivers requiring to - * add any debug entry for a particular voltage domain. Returns NULL - * in case of error. - */ -struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm) -{ - struct omap_vdd_info *vdd; - - if (!voltdm || IS_ERR(voltdm)) { - pr_warning("%s: VDD specified does not exist!\n", __func__); - return NULL; - } - - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); - - return vdd->debug_dir; -} - -/** * omap_change_voltscale_method() - API to change the voltage scaling method. * @voltdm: pointer to the VDD whose voltage scaling method * has to be changed. @@ -1005,23 +218,19 @@ struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm) * defined in voltage.h */ void omap_change_voltscale_method(struct voltagedomain *voltdm, - int voltscale_method) + int voltscale_method) { - struct omap_vdd_info *vdd; - if (!voltdm || IS_ERR(voltdm)) { pr_warning("%s: VDD specified does not exist!\n", __func__); return; } - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); - switch (voltscale_method) { case VOLTSCALE_VPFORCEUPDATE: - vdd->volt_scale = vp_forceupdate_scale_voltage; + voltdm->scale = omap_vp_forceupdate_scale; return; case VOLTSCALE_VCBYPASS: - vdd->volt_scale = vc_bypass_scale_voltage; + voltdm->scale = omap_vc_bypass_scale; return; default: pr_warning("%s: Trying to change the method of voltage scaling" @@ -1030,77 +239,192 @@ void omap_change_voltscale_method(struct voltagedomain *voltdm, } /** - * omap_voltage_domain_lookup() - API to get the voltage domain pointer - * @name: Name of the voltage domain + * omap_voltage_late_init() - Init the various voltage parameters * - * This API looks up in the global vdd_info struct for the - * existence of voltage domain <name>. If it exists, the API returns - * a pointer to the voltage domain structure corresponding to the - * VDD<name>. Else retuns error pointer. + * This API is to be called in the later stages of the + * system boot to init the voltage controller and + * voltage processors. */ -struct voltagedomain *omap_voltage_domain_lookup(char *name) +int __init omap_voltage_late_init(void) { - int i; + struct voltagedomain *voltdm; - if (!vdd_info) { - pr_err("%s: Voltage driver init not yet happened.Faulting!\n", + if (list_empty(&voltdm_list)) { + pr_err("%s: Voltage driver support not added\n", __func__); - return ERR_PTR(-EINVAL); + return -EINVAL; } - if (!name) { - pr_err("%s: No name to get the votage domain!\n", __func__); - return ERR_PTR(-EINVAL); + list_for_each_entry(voltdm, &voltdm_list, node) { + struct clk *sys_ck; + + if (!voltdm->scalable) + continue; + + sys_ck = clk_get(NULL, voltdm->sys_clk.name); + if (IS_ERR(sys_ck)) { + pr_warning("%s: Could not get sys clk.\n", __func__); + return -EINVAL; + } + voltdm->sys_clk.rate = clk_get_rate(sys_ck); + WARN_ON(!voltdm->sys_clk.rate); + clk_put(sys_ck); + + if (voltdm->vc) { + voltdm->scale = omap_vc_bypass_scale; + omap_vc_init_channel(voltdm); + } + + if (voltdm->vp) { + voltdm->scale = omap_vp_forceupdate_scale; + omap_vp_init(voltdm); + } } - for (i = 0; i < nr_scalable_vdd; i++) { - if (!(strcmp(name, vdd_info[i]->voltdm.name))) - return &vdd_info[i]->voltdm; + return 0; +} + +static struct voltagedomain *_voltdm_lookup(const char *name) +{ + struct voltagedomain *voltdm, *temp_voltdm; + + voltdm = NULL; + + list_for_each_entry(temp_voltdm, &voltdm_list, node) { + if (!strcmp(name, temp_voltdm->name)) { + voltdm = temp_voltdm; + break; + } } - return ERR_PTR(-EINVAL); + return voltdm; } /** - * omap_voltage_late_init() - Init the various voltage parameters + * voltdm_add_pwrdm - add a powerdomain to a voltagedomain + * @voltdm: struct voltagedomain * to add the powerdomain to + * @pwrdm: struct powerdomain * to associate with a voltagedomain * - * This API is to be called in the later stages of the - * system boot to init the voltage controller and - * voltage processors. + * Associate the powerdomain @pwrdm with a voltagedomain @voltdm. This + * enables the use of voltdm_for_each_pwrdm(). Returns -EINVAL if + * presented with invalid pointers; -ENOMEM if memory could not be allocated; + * or 0 upon success. */ -int __init omap_voltage_late_init(void) +int voltdm_add_pwrdm(struct voltagedomain *voltdm, struct powerdomain *pwrdm) { - int i; + if (!voltdm || !pwrdm) + return -EINVAL; - if (!vdd_info) { - pr_err("%s: Voltage driver support not added\n", - __func__); + pr_debug("voltagedomain: associating powerdomain %s with voltagedomain " + "%s\n", pwrdm->name, voltdm->name); + + list_add(&pwrdm->voltdm_node, &voltdm->pwrdm_list); + + return 0; +} + +/** + * voltdm_for_each_pwrdm - call function for each pwrdm in a voltdm + * @voltdm: struct voltagedomain * to iterate over + * @fn: callback function * + * + * Call the supplied function @fn for each powerdomain in the + * voltagedomain @voltdm. Returns -EINVAL if presented with invalid + * pointers; or passes along the last return value of the callback + * function, which should be 0 for success or anything else to + * indicate failure. + */ +int voltdm_for_each_pwrdm(struct voltagedomain *voltdm, + int (*fn)(struct voltagedomain *voltdm, + struct powerdomain *pwrdm)) +{ + struct powerdomain *pwrdm; + int ret = 0; + + if (!fn) return -EINVAL; - } - voltage_dir = debugfs_create_dir("voltage", NULL); - if (IS_ERR(voltage_dir)) - pr_err("%s: Unable to create voltage debugfs main dir\n", - __func__); - for (i = 0; i < nr_scalable_vdd; i++) { - if (omap_vdd_data_configure(vdd_info[i])) - continue; - omap_vc_init(vdd_info[i]); - vp_init(vdd_info[i]); - vdd_debugfs_init(vdd_info[i]); + list_for_each_entry(pwrdm, &voltdm->pwrdm_list, voltdm_node) + ret = (*fn)(voltdm, pwrdm); + + return ret; +} + +/** + * voltdm_for_each - call function on each registered voltagedomain + * @fn: callback function * + * + * Call the supplied function @fn for each registered voltagedomain. + * The callback function @fn can return anything but 0 to bail out + * early from the iterator. Returns the last return value of the + * callback function, which should be 0 for success or anything else + * to indicate failure; or -EINVAL if the function pointer is null. + */ +int voltdm_for_each(int (*fn)(struct voltagedomain *voltdm, void *user), + void *user) +{ + struct voltagedomain *temp_voltdm; + int ret = 0; + + if (!fn) + return -EINVAL; + + list_for_each_entry(temp_voltdm, &voltdm_list, node) { + ret = (*fn)(temp_voltdm, user); + if (ret) + break; } - return 0; + return ret; } -/* XXX document */ -int __init omap_voltage_early_init(s16 prm_mod, s16 prm_irqst_ocp_mod, - struct omap_vdd_info *omap_vdd_array[], - u8 omap_vdd_count) +static int _voltdm_register(struct voltagedomain *voltdm) { - prm_mod_offs = prm_mod; - prm_irqst_ocp_mod_offs = prm_irqst_ocp_mod; - vdd_info = omap_vdd_array; - nr_scalable_vdd = omap_vdd_count; + if (!voltdm || !voltdm->name) + return -EINVAL; + + INIT_LIST_HEAD(&voltdm->pwrdm_list); + list_add(&voltdm->node, &voltdm_list); + + pr_debug("voltagedomain: registered %s\n", voltdm->name); + return 0; } + +/** + * voltdm_lookup - look up a voltagedomain by name, return a pointer + * @name: name of voltagedomain + * + * Find a registered voltagedomain by its name @name. Returns a pointer + * to the struct voltagedomain if found, or NULL otherwise. + */ +struct voltagedomain *voltdm_lookup(const char *name) +{ + struct voltagedomain *voltdm ; + + if (!name) + return NULL; + + voltdm = _voltdm_lookup(name); + + return voltdm; +} + +/** + * voltdm_init - set up the voltagedomain layer + * @voltdm_list: array of struct voltagedomain pointers to register + * + * Loop through the array of voltagedomains @voltdm_list, registering all + * that are available on the current CPU. If voltdm_list is supplied + * and not null, all of the referenced voltagedomains will be + * registered. No return value. + */ +void voltdm_init(struct voltagedomain **voltdms) +{ + struct voltagedomain **v; + + if (voltdms) { + for (v = voltdms; *v; v++) + _voltdm_register(*v); + } +} diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index e9f5408244e0..16a1b092cf36 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -19,6 +19,8 @@ #include "vc.h" #include "vp.h" +struct powerdomain; + /* XXX document */ #define VOLTSCALE_VPFORCEUPDATE 1 #define VOLTSCALE_VCBYPASS 2 @@ -32,29 +34,60 @@ #define OMAP3_VOLTSETUP2 0xff /** - * struct omap_vfsm_instance_data - per-voltage manager FSM register/bitfield + * struct omap_vfsm_instance - per-voltage manager FSM register/bitfield * data * @voltsetup_mask: SETUP_TIME* bitmask in the PRM_VOLTSETUP* register * @voltsetup_reg: register offset of PRM_VOLTSETUP from PRM base - * @voltsetup_shift: SETUP_TIME* field shift in the PRM_VOLTSETUP* register * * XXX What about VOLTOFFSET/VOLTCTRL? - * XXX It is not necessary to have both a _mask and a _shift for the same - * bitfield - remove one! */ -struct omap_vfsm_instance_data { +struct omap_vfsm_instance { u32 voltsetup_mask; u8 voltsetup_reg; - u8 voltsetup_shift; }; /** * struct voltagedomain - omap voltage domain global structure. - * @name: Name of the voltage domain which can be used as a unique - * identifier. + * @name: Name of the voltage domain which can be used as a unique identifier. + * @scalable: Whether or not this voltage domain is scalable + * @node: list_head linking all voltage domains + * @pwrdm_list: list_head linking all powerdomains in this voltagedomain + * @vc: pointer to VC channel associated with this voltagedomain + * @vp: pointer to VP associated with this voltagedomain + * @read: read a VC/VP register + * @write: write a VC/VP register + * @read: read-modify-write a VC/VP register + * @sys_clk: system clock name/frequency, used for various timing calculations + * @scale: function used to scale the voltage of the voltagedomain + * @nominal_volt: current nominal voltage for this voltage domain + * @volt_data: voltage table having the distinct voltages supported + * by the domain and other associated per voltage data. */ struct voltagedomain { char *name; + bool scalable; + struct list_head node; + struct list_head pwrdm_list; + struct omap_vc_channel *vc; + const struct omap_vfsm_instance *vfsm; + struct omap_vp_instance *vp; + struct omap_voltdm_pmic *pmic; + + /* VC/VP register access functions: SoC specific */ + u32 (*read) (u8 offset); + void (*write) (u32 val, u8 offset); + u32 (*rmw)(u32 mask, u32 bits, u8 offset); + + union { + const char *name; + u32 rate; + } sys_clk; + + int (*scale) (struct voltagedomain *voltdm, + unsigned long target_volt); + + u32 nominal_volt; + struct omap_volt_data *volt_data; }; /** @@ -77,13 +110,18 @@ struct omap_volt_data { }; /** - * struct omap_volt_pmic_info - PMIC specific data required by voltage driver. + * struct omap_voltdm_pmic - PMIC specific data required by voltage driver. * @slew_rate: PMIC slew rate (in uv/us) * @step_size: PMIC voltage step size (in uv) + * @i2c_slave_addr: I2C slave address of PMIC + * @volt_reg_addr: voltage configuration register address + * @cmd_reg_addr: command (on, on-LP, ret, off) configuration register address + * @i2c_high_speed: whether VC uses I2C high-speed mode to PMIC + * @i2c_mcode: master code value for I2C high-speed preamble transmission * @vsel_to_uv: PMIC API to convert vsel value to actual voltage in uV. * @uv_to_vsel: PMIC API to convert voltage in uV to vsel value. */ -struct omap_volt_pmic_info { +struct omap_voltdm_pmic { int slew_rate; int step_size; u32 on_volt; @@ -91,94 +129,44 @@ struct omap_volt_pmic_info { u32 ret_volt; u32 off_volt; u16 volt_setup_time; + u16 i2c_slave_addr; + u16 volt_reg_addr; + u16 cmd_reg_addr; u8 vp_erroroffset; u8 vp_vstepmin; u8 vp_vstepmax; u8 vp_vddmin; u8 vp_vddmax; u8 vp_timeout_us; - u8 i2c_slave_addr; - u8 pmic_reg; + bool i2c_high_speed; + u8 i2c_mcode; unsigned long (*vsel_to_uv) (const u8 vsel); u8 (*uv_to_vsel) (unsigned long uV); }; -/** - * omap_vdd_info - Per Voltage Domain info - * - * @volt_data : voltage table having the distinct voltages supported - * by the domain and other associated per voltage data. - * @pmic_info : pmic specific parameters which should be populted by - * the pmic drivers. - * @vp_data : the register values, shifts, masks for various - * vp registers - * @vp_rt_data : VP data derived at runtime, not predefined - * @vc_data : structure containing various various vc registers, - * shifts, masks etc. - * @vfsm : voltage manager FSM data - * @voltdm : pointer to the voltage domain structure - * @debug_dir : debug directory for this voltage domain. - * @curr_volt : current voltage for this vdd. - * @vp_enabled : flag to keep track of whether vp is enabled or not - * @volt_scale : API to scale the voltage of the vdd. - */ -struct omap_vdd_info { - struct omap_volt_data *volt_data; - struct omap_volt_pmic_info *pmic_info; - struct omap_vp_instance_data *vp_data; - struct omap_vp_runtime_data vp_rt_data; - struct omap_vc_instance_data *vc_data; - const struct omap_vfsm_instance_data *vfsm; - struct voltagedomain voltdm; - struct dentry *debug_dir; - u32 curr_volt; - bool vp_enabled; - u32 (*read_reg) (u16 mod, u8 offset); - void (*write_reg) (u32 val, u16 mod, u8 offset); - int (*volt_scale) (struct omap_vdd_info *vdd, - unsigned long target_volt); -}; - -unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm); -void omap_vp_enable(struct voltagedomain *voltdm); -void omap_vp_disable(struct voltagedomain *voltdm); -int omap_voltage_scale_vdd(struct voltagedomain *voltdm, - unsigned long target_volt); -void omap_voltage_reset(struct voltagedomain *voltdm); void omap_voltage_get_volttable(struct voltagedomain *voltdm, struct omap_volt_data **volt_data); struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, unsigned long volt); -unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm); -struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm); -int __init omap_voltage_early_init(s16 prm_mod, s16 prm_irqst_mod, - struct omap_vdd_info *omap_vdd_array[], - u8 omap_vdd_count); -#ifdef CONFIG_PM int omap_voltage_register_pmic(struct voltagedomain *voltdm, - struct omap_volt_pmic_info *pmic_info); + struct omap_voltdm_pmic *pmic); void omap_change_voltscale_method(struct voltagedomain *voltdm, int voltscale_method); -/* API to get the voltagedomain pointer */ -struct voltagedomain *omap_voltage_domain_lookup(char *name); - int omap_voltage_late_init(void); -#else -static inline int omap_voltage_register_pmic(struct voltagedomain *voltdm, - struct omap_volt_pmic_info *pmic_info) -{ - return -EINVAL; -} -static inline void omap_change_voltscale_method(struct voltagedomain *voltdm, - int voltscale_method) {} -static inline int omap_voltage_late_init(void) -{ - return -EINVAL; -} -static inline struct voltagedomain *omap_voltage_domain_lookup(char *name) -{ - return ERR_PTR(-EINVAL); -} -#endif +extern void omap2xxx_voltagedomains_init(void); +extern void omap3xxx_voltagedomains_init(void); +extern void omap44xx_voltagedomains_init(void); + +struct voltagedomain *voltdm_lookup(const char *name); +void voltdm_init(struct voltagedomain **voltdm_list); +int voltdm_add_pwrdm(struct voltagedomain *voltdm, struct powerdomain *pwrdm); +int voltdm_for_each(int (*fn)(struct voltagedomain *voltdm, void *user), + void *user); +int voltdm_for_each_pwrdm(struct voltagedomain *voltdm, + int (*fn)(struct voltagedomain *voltdm, + struct powerdomain *pwrdm)); +int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt); +void voltdm_reset(struct voltagedomain *voltdm); +unsigned long voltdm_get_voltage(struct voltagedomain *voltdm); #endif diff --git a/arch/arm/mach-omap2/voltagedomains2xxx_data.c b/arch/arm/mach-omap2/voltagedomains2xxx_data.c new file mode 100644 index 000000000000..7a41349981e5 --- /dev/null +++ b/arch/arm/mach-omap2/voltagedomains2xxx_data.c @@ -0,0 +1,32 @@ +/* + * OMAP3 voltage domain data + * + * Copyright (C) 2011 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/init.h> + +#include "voltage.h" + +static struct voltagedomain omap2_voltdm_core = { + .name = "core", +}; + +static struct voltagedomain omap2_voltdm_wkup = { + .name = "wakeup", +}; + +static struct voltagedomain *voltagedomains_omap2[] __initdata = { + &omap2_voltdm_core, + &omap2_voltdm_wkup, + NULL, +}; + +void __init omap2xxx_voltagedomains_init(void) +{ + voltdm_init(voltagedomains_omap2); +} diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c index def230fd2fde..071101debbbc 100644 --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c @@ -31,65 +31,70 @@ * VDD data */ -static const struct omap_vfsm_instance_data omap3_vdd1_vfsm_data = { +static const struct omap_vfsm_instance omap3_vdd1_vfsm = { .voltsetup_reg = OMAP3_PRM_VOLTSETUP1_OFFSET, - .voltsetup_shift = OMAP3430_SETUP_TIME1_SHIFT, .voltsetup_mask = OMAP3430_SETUP_TIME1_MASK, }; -static struct omap_vdd_info omap3_vdd1_info = { - .vp_data = &omap3_vp1_data, - .vc_data = &omap3_vc1_data, - .vfsm = &omap3_vdd1_vfsm_data, - .voltdm = { - .name = "mpu", - }, -}; - -static const struct omap_vfsm_instance_data omap3_vdd2_vfsm_data = { +static const struct omap_vfsm_instance omap3_vdd2_vfsm = { .voltsetup_reg = OMAP3_PRM_VOLTSETUP1_OFFSET, - .voltsetup_shift = OMAP3430_SETUP_TIME2_SHIFT, .voltsetup_mask = OMAP3430_SETUP_TIME2_MASK, }; -static struct omap_vdd_info omap3_vdd2_info = { - .vp_data = &omap3_vp2_data, - .vc_data = &omap3_vc2_data, - .vfsm = &omap3_vdd2_vfsm_data, - .voltdm = { - .name = "core", - }, +static struct voltagedomain omap3_voltdm_mpu = { + .name = "mpu_iva", + .scalable = true, + .read = omap3_prm_vcvp_read, + .write = omap3_prm_vcvp_write, + .rmw = omap3_prm_vcvp_rmw, + .vc = &omap3_vc_mpu, + .vfsm = &omap3_vdd1_vfsm, + .vp = &omap3_vp_mpu, }; -/* OMAP3 VDD structures */ -static struct omap_vdd_info *omap3_vdd_info[] = { - &omap3_vdd1_info, - &omap3_vdd2_info, +static struct voltagedomain omap3_voltdm_core = { + .name = "core", + .scalable = true, + .read = omap3_prm_vcvp_read, + .write = omap3_prm_vcvp_write, + .rmw = omap3_prm_vcvp_rmw, + .vc = &omap3_vc_core, + .vfsm = &omap3_vdd2_vfsm, + .vp = &omap3_vp_core, }; -/* OMAP3 specific voltage init functions */ -static int __init omap3xxx_voltage_early_init(void) -{ - s16 prm_mod = OMAP3430_GR_MOD; - s16 prm_irqst_ocp_mod = OCP_MOD; +static struct voltagedomain omap3_voltdm_wkup = { + .name = "wakeup", +}; - if (!cpu_is_omap34xx()) - return 0; +static struct voltagedomain *voltagedomains_omap3[] __initdata = { + &omap3_voltdm_mpu, + &omap3_voltdm_core, + &omap3_voltdm_wkup, + NULL, +}; + +static const char *sys_clk_name __initdata = "sys_ck"; + +void __init omap3xxx_voltagedomains_init(void) +{ + struct voltagedomain *voltdm; + int i; /* * XXX Will depend on the process, validation, and binning * for the currently-running IC */ if (cpu_is_omap3630()) { - omap3_vdd1_info.volt_data = omap36xx_vddmpu_volt_data; - omap3_vdd2_info.volt_data = omap36xx_vddcore_volt_data; + omap3_voltdm_mpu.volt_data = omap36xx_vddmpu_volt_data; + omap3_voltdm_core.volt_data = omap36xx_vddcore_volt_data; } else { - omap3_vdd1_info.volt_data = omap34xx_vddmpu_volt_data; - omap3_vdd2_info.volt_data = omap34xx_vddcore_volt_data; + omap3_voltdm_mpu.volt_data = omap34xx_vddmpu_volt_data; + omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data; } - return omap_voltage_early_init(prm_mod, prm_irqst_ocp_mod, - omap3_vdd_info, - ARRAY_SIZE(omap3_vdd_info)); + for (i = 0; voltdm = voltagedomains_omap3[i], voltdm; i++) + voltdm->sys_clk.name = sys_clk_name; + + voltdm_init(voltagedomains_omap3); }; -core_initcall(omap3xxx_voltage_early_init); diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c index cb64996de0e1..c4584e9ac717 100644 --- a/arch/arm/mach-omap2/voltagedomains44xx_data.c +++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c @@ -32,71 +32,80 @@ #include "vc.h" #include "vp.h" -static const struct omap_vfsm_instance_data omap4_vdd_mpu_vfsm_data = { +static const struct omap_vfsm_instance omap4_vdd_mpu_vfsm = { .voltsetup_reg = OMAP4_PRM_VOLTSETUP_MPU_RET_SLEEP_OFFSET, }; -static struct omap_vdd_info omap4_vdd_mpu_info = { - .vp_data = &omap4_vp_mpu_data, - .vc_data = &omap4_vc_mpu_data, - .vfsm = &omap4_vdd_mpu_vfsm_data, - .voltdm = { - .name = "mpu", - }, +static const struct omap_vfsm_instance omap4_vdd_iva_vfsm = { + .voltsetup_reg = OMAP4_PRM_VOLTSETUP_IVA_RET_SLEEP_OFFSET, }; -static const struct omap_vfsm_instance_data omap4_vdd_iva_vfsm_data = { - .voltsetup_reg = OMAP4_PRM_VOLTSETUP_IVA_RET_SLEEP_OFFSET, +static const struct omap_vfsm_instance omap4_vdd_core_vfsm = { + .voltsetup_reg = OMAP4_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET, }; -static struct omap_vdd_info omap4_vdd_iva_info = { - .vp_data = &omap4_vp_iva_data, - .vc_data = &omap4_vc_iva_data, - .vfsm = &omap4_vdd_iva_vfsm_data, - .voltdm = { - .name = "iva", - }, +static struct voltagedomain omap4_voltdm_mpu = { + .name = "mpu", + .scalable = true, + .read = omap4_prm_vcvp_read, + .write = omap4_prm_vcvp_write, + .rmw = omap4_prm_vcvp_rmw, + .vc = &omap4_vc_mpu, + .vfsm = &omap4_vdd_mpu_vfsm, + .vp = &omap4_vp_mpu, }; -static const struct omap_vfsm_instance_data omap4_vdd_core_vfsm_data = { - .voltsetup_reg = OMAP4_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET, +static struct voltagedomain omap4_voltdm_iva = { + .name = "iva", + .scalable = true, + .read = omap4_prm_vcvp_read, + .write = omap4_prm_vcvp_write, + .rmw = omap4_prm_vcvp_rmw, + .vc = &omap4_vc_iva, + .vfsm = &omap4_vdd_iva_vfsm, + .vp = &omap4_vp_iva, }; -static struct omap_vdd_info omap4_vdd_core_info = { - .vp_data = &omap4_vp_core_data, - .vc_data = &omap4_vc_core_data, - .vfsm = &omap4_vdd_core_vfsm_data, - .voltdm = { - .name = "core", - }, +static struct voltagedomain omap4_voltdm_core = { + .name = "core", + .scalable = true, + .read = omap4_prm_vcvp_read, + .write = omap4_prm_vcvp_write, + .rmw = omap4_prm_vcvp_rmw, + .vc = &omap4_vc_core, + .vfsm = &omap4_vdd_core_vfsm, + .vp = &omap4_vp_core, }; -/* OMAP4 VDD structures */ -static struct omap_vdd_info *omap4_vdd_info[] = { - &omap4_vdd_mpu_info, - &omap4_vdd_iva_info, - &omap4_vdd_core_info, +static struct voltagedomain omap4_voltdm_wkup = { + .name = "wakeup", }; -/* OMAP4 specific voltage init functions */ -static int __init omap44xx_voltage_early_init(void) -{ - s16 prm_mod = OMAP4430_PRM_DEVICE_INST; - s16 prm_irqst_ocp_mod = OMAP4430_PRM_OCP_SOCKET_INST; +static struct voltagedomain *voltagedomains_omap4[] __initdata = { + &omap4_voltdm_mpu, + &omap4_voltdm_iva, + &omap4_voltdm_core, + &omap4_voltdm_wkup, + NULL, +}; + +static const char *sys_clk_name __initdata = "sys_clkin_ck"; - if (!cpu_is_omap44xx()) - return 0; +void __init omap44xx_voltagedomains_init(void) +{ + struct voltagedomain *voltdm; + int i; /* * XXX Will depend on the process, validation, and binning * for the currently-running IC */ - omap4_vdd_mpu_info.volt_data = omap44xx_vdd_mpu_volt_data; - omap4_vdd_iva_info.volt_data = omap44xx_vdd_iva_volt_data; - omap4_vdd_core_info.volt_data = omap44xx_vdd_core_volt_data; + omap4_voltdm_mpu.volt_data = omap44xx_vdd_mpu_volt_data; + omap4_voltdm_iva.volt_data = omap44xx_vdd_iva_volt_data; + omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data; + + for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++) + voltdm->sys_clk.name = sys_clk_name; - return omap_voltage_early_init(prm_mod, prm_irqst_ocp_mod, - omap4_vdd_info, - ARRAY_SIZE(omap4_vdd_info)); + voltdm_init(voltagedomains_omap4); }; -core_initcall(omap44xx_voltage_early_init); diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c new file mode 100644 index 000000000000..66bd700a2b98 --- /dev/null +++ b/arch/arm/mach-omap2/vp.c @@ -0,0 +1,278 @@ +#include <linux/kernel.h> +#include <linux/init.h> + +#include <plat/common.h> + +#include "voltage.h" +#include "vp.h" +#include "prm-regbits-34xx.h" +#include "prm-regbits-44xx.h" +#include "prm44xx.h" + +static u32 _vp_set_init_voltage(struct voltagedomain *voltdm, u32 volt) +{ + struct omap_vp_instance *vp = voltdm->vp; + u32 vpconfig; + char vsel; + + vsel = voltdm->pmic->uv_to_vsel(volt); + + vpconfig = voltdm->read(vp->vpconfig); + vpconfig &= ~(vp->common->vpconfig_initvoltage_mask | + vp->common->vpconfig_forceupdate | + vp->common->vpconfig_initvdd); + vpconfig |= vsel << __ffs(vp->common->vpconfig_initvoltage_mask); + voltdm->write(vpconfig, vp->vpconfig); + + /* Trigger initVDD value copy to voltage processor */ + voltdm->write((vpconfig | vp->common->vpconfig_initvdd), + vp->vpconfig); + + /* Clear initVDD copy trigger bit */ + voltdm->write(vpconfig, vp->vpconfig); + + return vpconfig; +} + +/* Generic voltage init functions */ +void __init omap_vp_init(struct voltagedomain *voltdm) +{ + struct omap_vp_instance *vp = voltdm->vp; + u32 val, sys_clk_rate, timeout, waittime; + u32 vddmin, vddmax, vstepmin, vstepmax; + + if (!voltdm->read || !voltdm->write) { + pr_err("%s: No read/write API for accessing vdd_%s regs\n", + __func__, voltdm->name); + return; + } + + vp->enabled = false; + + /* Divide to avoid overflow */ + sys_clk_rate = voltdm->sys_clk.rate / 1000; + + timeout = (sys_clk_rate * voltdm->pmic->vp_timeout_us) / 1000; + vddmin = voltdm->pmic->vp_vddmin; + vddmax = voltdm->pmic->vp_vddmax; + + waittime = ((voltdm->pmic->step_size / voltdm->pmic->slew_rate) * + sys_clk_rate) / 1000; + vstepmin = voltdm->pmic->vp_vstepmin; + vstepmax = voltdm->pmic->vp_vstepmax; + + /* + * VP_CONFIG: error gain is not set here, it will be updated + * on each scale, based on OPP. + */ + val = (voltdm->pmic->vp_erroroffset << + __ffs(voltdm->vp->common->vpconfig_erroroffset_mask)) | + vp->common->vpconfig_timeouten; + voltdm->write(val, vp->vpconfig); + + /* VSTEPMIN */ + val = (waittime << vp->common->vstepmin_smpswaittimemin_shift) | + (vstepmin << vp->common->vstepmin_stepmin_shift); + voltdm->write(val, vp->vstepmin); + + /* VSTEPMAX */ + val = (vstepmax << vp->common->vstepmax_stepmax_shift) | + (waittime << vp->common->vstepmax_smpswaittimemax_shift); + voltdm->write(val, vp->vstepmax); + + /* VLIMITTO */ + val = (vddmax << vp->common->vlimitto_vddmax_shift) | + (vddmin << vp->common->vlimitto_vddmin_shift) | + (timeout << vp->common->vlimitto_timeout_shift); + voltdm->write(val, vp->vlimitto); +} + +int omap_vp_update_errorgain(struct voltagedomain *voltdm, + unsigned long target_volt) +{ + struct omap_volt_data *volt_data; + + if (!voltdm->vp) + return -EINVAL; + + /* Get volt_data corresponding to target_volt */ + volt_data = omap_voltage_get_voltdata(voltdm, target_volt); + if (IS_ERR(volt_data)) + return -EINVAL; + + /* Setting vp errorgain based on the voltage */ + voltdm->rmw(voltdm->vp->common->vpconfig_errorgain_mask, + volt_data->vp_errgain << + __ffs(voltdm->vp->common->vpconfig_errorgain_mask), + voltdm->vp->vpconfig); + + return 0; +} + +/* VP force update method of voltage scaling */ +int omap_vp_forceupdate_scale(struct voltagedomain *voltdm, + unsigned long target_volt) +{ + struct omap_vp_instance *vp = voltdm->vp; + u32 vpconfig; + u8 target_vsel, current_vsel; + int ret, timeout = 0; + + ret = omap_vc_pre_scale(voltdm, target_volt, &target_vsel, ¤t_vsel); + if (ret) + return ret; + + /* + * Clear all pending TransactionDone interrupt/status. Typical latency + * is <3us + */ + while (timeout++ < VP_TRANXDONE_TIMEOUT) { + vp->common->ops->clear_txdone(vp->id); + if (!vp->common->ops->check_txdone(vp->id)) + break; + udelay(1); + } + if (timeout >= VP_TRANXDONE_TIMEOUT) { + pr_warning("%s: vdd_%s TRANXDONE timeout exceeded." + "Voltage change aborted", __func__, voltdm->name); + return -ETIMEDOUT; + } + + vpconfig = _vp_set_init_voltage(voltdm, target_volt); + + /* Force update of voltage */ + voltdm->write(vpconfig | vp->common->vpconfig_forceupdate, + voltdm->vp->vpconfig); + + /* + * Wait for TransactionDone. Typical latency is <200us. + * Depends on SMPSWAITTIMEMIN/MAX and voltage change + */ + timeout = 0; + omap_test_timeout(vp->common->ops->check_txdone(vp->id), + VP_TRANXDONE_TIMEOUT, timeout); + if (timeout >= VP_TRANXDONE_TIMEOUT) + pr_err("%s: vdd_%s TRANXDONE timeout exceeded." + "TRANXDONE never got set after the voltage update\n", + __func__, voltdm->name); + + omap_vc_post_scale(voltdm, target_volt, target_vsel, current_vsel); + + /* + * Disable TransactionDone interrupt , clear all status, clear + * control registers + */ + timeout = 0; + while (timeout++ < VP_TRANXDONE_TIMEOUT) { + vp->common->ops->clear_txdone(vp->id); + if (!vp->common->ops->check_txdone(vp->id)) + break; + udelay(1); + } + + if (timeout >= VP_TRANXDONE_TIMEOUT) + pr_warning("%s: vdd_%s TRANXDONE timeout exceeded while trying" + "to clear the TRANXDONE status\n", + __func__, voltdm->name); + + /* Clear force bit */ + voltdm->write(vpconfig, vp->vpconfig); + + return 0; +} + +/** + * omap_vp_enable() - API to enable a particular VP + * @voltdm: pointer to the VDD whose VP is to be enabled. + * + * This API enables a particular voltage processor. Needed by the smartreflex + * class drivers. + */ +void omap_vp_enable(struct voltagedomain *voltdm) +{ + struct omap_vp_instance *vp; + u32 vpconfig, volt; + + if (!voltdm || IS_ERR(voltdm)) { + pr_warning("%s: VDD specified does not exist!\n", __func__); + return; + } + + vp = voltdm->vp; + if (!voltdm->read || !voltdm->write) { + pr_err("%s: No read/write API for accessing vdd_%s regs\n", + __func__, voltdm->name); + return; + } + + /* If VP is already enabled, do nothing. Return */ + if (vp->enabled) + return; + + volt = voltdm_get_voltage(voltdm); + if (!volt) { + pr_warning("%s: unable to find current voltage for %s\n", + __func__, voltdm->name); + return; + } + + vpconfig = _vp_set_init_voltage(voltdm, volt); + + /* Enable VP */ + vpconfig |= vp->common->vpconfig_vpenable; + voltdm->write(vpconfig, vp->vpconfig); + + vp->enabled = true; +} + +/** + * omap_vp_disable() - API to disable a particular VP + * @voltdm: pointer to the VDD whose VP is to be disabled. + * + * This API disables a particular voltage processor. Needed by the smartreflex + * class drivers. + */ +void omap_vp_disable(struct voltagedomain *voltdm) +{ + struct omap_vp_instance *vp; + u32 vpconfig; + int timeout; + + if (!voltdm || IS_ERR(voltdm)) { + pr_warning("%s: VDD specified does not exist!\n", __func__); + return; + } + + vp = voltdm->vp; + if (!voltdm->read || !voltdm->write) { + pr_err("%s: No read/write API for accessing vdd_%s regs\n", + __func__, voltdm->name); + return; + } + + /* If VP is already disabled, do nothing. Return */ + if (!vp->enabled) { + pr_warning("%s: Trying to disable VP for vdd_%s when" + "it is already disabled\n", __func__, voltdm->name); + return; + } + + /* Disable VP */ + vpconfig = voltdm->read(vp->vpconfig); + vpconfig &= ~vp->common->vpconfig_vpenable; + voltdm->write(vpconfig, vp->vpconfig); + + /* + * Wait for VP idle Typical latency is <2us. Maximum latency is ~100us + */ + omap_test_timeout((voltdm->read(vp->vstatus)), + VP_IDLE_TIMEOUT, timeout); + + if (timeout >= VP_IDLE_TIMEOUT) + pr_warning("%s: vdd_%s idle timedout\n", + __func__, voltdm->name); + + vp->enabled = false; + + return; +} diff --git a/arch/arm/mach-omap2/vp.h b/arch/arm/mach-omap2/vp.h index 7ce134f7de79..7c155d248aa3 100644 --- a/arch/arm/mach-omap2/vp.h +++ b/arch/arm/mach-omap2/vp.h @@ -19,44 +19,60 @@ #include <linux/kernel.h> +struct voltagedomain; + +/* + * Voltage Processor (VP) identifiers + */ +#define OMAP3_VP_VDD_MPU_ID 0 +#define OMAP3_VP_VDD_CORE_ID 1 +#define OMAP4_VP_VDD_CORE_ID 0 +#define OMAP4_VP_VDD_IVA_ID 1 +#define OMAP4_VP_VDD_MPU_ID 2 + /* XXX document */ #define VP_IDLE_TIMEOUT 200 #define VP_TRANXDONE_TIMEOUT 300 +/** + * struct omap_vp_ops - per-VP operations + * @check_txdone: check for VP transaction done + * @clear_txdone: clear VP transaction done status + */ +struct omap_vp_ops { + u32 (*check_txdone)(u8 vp_id); + void (*clear_txdone)(u8 vp_id); +}; /** - * struct omap_vp_common_data - register data common to all VDDs + * struct omap_vp_common - register data common to all VDDs + * @vpconfig_erroroffset_mask: ERROROFFSET bitmask in the PRM_VP*_CONFIG reg * @vpconfig_errorgain_mask: ERRORGAIN bitmask in the PRM_VP*_CONFIG reg * @vpconfig_initvoltage_mask: INITVOLTAGE bitmask in the PRM_VP*_CONFIG reg - * @vpconfig_timeouten_mask: TIMEOUT bitmask in the PRM_VP*_CONFIG reg + * @vpconfig_timeouten: TIMEOUT bitmask in the PRM_VP*_CONFIG reg * @vpconfig_initvdd: INITVDD bitmask in the PRM_VP*_CONFIG reg * @vpconfig_forceupdate: FORCEUPDATE bitmask in the PRM_VP*_CONFIG reg * @vpconfig_vpenable: VPENABLE bitmask in the PRM_VP*_CONFIG reg * @vpconfig_erroroffset_shift: ERROROFFSET field shift in PRM_VP*_CONFIG reg * @vpconfig_errorgain_shift: ERRORGAIN field shift in PRM_VP*_CONFIG reg * @vpconfig_initvoltage_shift: INITVOLTAGE field shift in PRM_VP*_CONFIG reg - * @vpconfig_stepmin_shift: VSTEPMIN field shift in the PRM_VP*_VSTEPMIN reg - * @vpconfig_smpswaittimemin_shift: SMPSWAITTIMEMIN field shift in PRM_VP*_VSTEPMIN reg - * @vpconfig_stepmax_shift: VSTEPMAX field shift in the PRM_VP*_VSTEPMAX reg - * @vpconfig_smpswaittimemax_shift: SMPSWAITTIMEMAX field shift in PRM_VP*_VSTEPMAX reg - * @vpconfig_vlimitto_vddmin_shift: VDDMIN field shift in PRM_VP*_VLIMITTO reg - * @vpconfig_vlimitto_vddmax_shift: VDDMAX field shift in PRM_VP*_VLIMITTO reg - * @vpconfig_vlimitto_timeout_shift: TIMEOUT field shift in PRM_VP*_VLIMITTO reg - * - * XXX It it not necessary to have both a mask and a shift for the same - * bitfield - remove one - * XXX Many of these fields are wrongly named -- e.g., vpconfig_smps* -- fix! + * @vstepmin_stepmin_shift: VSTEPMIN field shift in the PRM_VP*_VSTEPMIN reg + * @vstepmin_smpswaittimemin_shift: SMPSWAITTIMEMIN field shift in PRM_VP*_VSTEPMIN reg + * @vstepmax_stepmax_shift: VSTEPMAX field shift in the PRM_VP*_VSTEPMAX reg + * @vstepmax_smpswaittimemax_shift: SMPSWAITTIMEMAX field shift in PRM_VP*_VSTEPMAX reg + * @vlimitto_vddmin_shift: VDDMIN field shift in PRM_VP*_VLIMITTO reg + * @vlimitto_vddmax_shift: VDDMAX field shift in PRM_VP*_VLIMITTO reg + * @vlimitto_timeout_shift: TIMEOUT field shift in PRM_VP*_VLIMITTO reg + * @vpvoltage_mask: VPVOLTAGE field mask in PRM_VP*_VOLTAGE reg */ -struct omap_vp_common_data { +struct omap_vp_common { + u32 vpconfig_erroroffset_mask; u32 vpconfig_errorgain_mask; u32 vpconfig_initvoltage_mask; - u32 vpconfig_timeouten; - u32 vpconfig_initvdd; - u32 vpconfig_forceupdate; - u32 vpconfig_vpenable; - u8 vpconfig_erroroffset_shift; - u8 vpconfig_errorgain_shift; - u8 vpconfig_initvoltage_shift; + u8 vpconfig_timeouten; + u8 vpconfig_initvdd; + u8 vpconfig_forceupdate; + u8 vpconfig_vpenable; u8 vstepmin_stepmin_shift; u8 vstepmin_smpswaittimemin_shift; u8 vstepmax_stepmax_shift; @@ -64,80 +80,49 @@ struct omap_vp_common_data { u8 vlimitto_vddmin_shift; u8 vlimitto_vddmax_shift; u8 vlimitto_timeout_shift; -}; + u8 vpvoltage_mask; -/** - * struct omap_vp_prm_irqst_data - PRM_IRQSTATUS_MPU.VP_TRANXDONE_ST data - * @prm_irqst_reg: reg offset for PRM_IRQSTATUS_MPU from top of PRM - * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg - * - * XXX prm_irqst_reg does not belong here - * XXX Note that on OMAP3, VP_TRANXDONE interrupt may not work due to a - * hardware bug - * XXX This structure is probably not needed - */ -struct omap_vp_prm_irqst_data { - u8 prm_irqst_reg; - u32 tranxdone_status; + const struct omap_vp_ops *ops; }; /** - * struct omap_vp_instance_data - VP register offsets (per-VDD) - * @vp_common: pointer to struct omap_vp_common_data * for this SoC - * @prm_irqst_data: pointer to struct omap_vp_prm_irqst_data for this VDD + * struct omap_vp_instance - VP register offsets (per-VDD) + * @common: pointer to struct omap_vp_common * for this SoC * @vpconfig: PRM_VP*_CONFIG reg offset from PRM start * @vstepmin: PRM_VP*_VSTEPMIN reg offset from PRM start * @vlimitto: PRM_VP*_VLIMITTO reg offset from PRM start * @vstatus: PRM_VP*_VSTATUS reg offset from PRM start * @voltage: PRM_VP*_VOLTAGE reg offset from PRM start + * @id: Unique identifier for VP instance. + * @enabled: flag to keep track of whether vp is enabled or not * * XXX vp_common is probably not needed since it is per-SoC */ -struct omap_vp_instance_data { - const struct omap_vp_common_data *vp_common; - const struct omap_vp_prm_irqst_data *prm_irqst_data; +struct omap_vp_instance { + const struct omap_vp_common *common; u8 vpconfig; u8 vstepmin; u8 vstepmax; u8 vlimitto; u8 vstatus; u8 voltage; + u8 id; + bool enabled; }; -/** - * struct omap_vp_runtime_data - VP data populated at runtime by code - * @vpconfig_erroroffset: value of ERROROFFSET bitfield in PRM_VP*_CONFIG - * @vpconfig_errorgain: value of ERRORGAIN bitfield in PRM_VP*_CONFIG - * @vstepmin_smpswaittimemin: value of SMPSWAITTIMEMIN bitfield in PRM_VP*_VSTEPMIN - * @vstepmax_smpswaittimemax: value of SMPSWAITTIMEMAX bitfield in PRM_VP*_VSTEPMAX - * @vlimitto_timeout: value of TIMEOUT bitfield in PRM_VP*_VLIMITTO - * @vstepmin_stepmin: value of VSTEPMIN bitfield in PRM_VP*_VSTEPMIN - * @vstepmax_stepmax: value of VSTEPMAX bitfield in PRM_VP*_VSTEPMAX - * @vlimitto_vddmin: value of VDDMIN bitfield in PRM_VP*_VLIMITTO - * @vlimitto_vddmax: value of VDDMAX bitfield in PRM_VP*_VLIMITTO - * - * XXX Is this structure really needed? Why not just program the - * device directly? They are in PRM space, therefore in the WKUP - * powerdomain, so register contents should not be lost in off-mode. - * XXX Some of these fields are incorrectly named, e.g., vstep* - */ -struct omap_vp_runtime_data { - u32 vpconfig_erroroffset; - u16 vpconfig_errorgain; - u16 vstepmin_smpswaittimemin; - u16 vstepmax_smpswaittimemax; - u16 vlimitto_timeout; - u8 vstepmin_stepmin; - u8 vstepmax_stepmax; - u8 vlimitto_vddmin; - u8 vlimitto_vddmax; -}; +extern struct omap_vp_instance omap3_vp_mpu; +extern struct omap_vp_instance omap3_vp_core; -extern struct omap_vp_instance_data omap3_vp1_data; -extern struct omap_vp_instance_data omap3_vp2_data; +extern struct omap_vp_instance omap4_vp_mpu; +extern struct omap_vp_instance omap4_vp_iva; +extern struct omap_vp_instance omap4_vp_core; -extern struct omap_vp_instance_data omap4_vp_mpu_data; -extern struct omap_vp_instance_data omap4_vp_iva_data; -extern struct omap_vp_instance_data omap4_vp_core_data; +void omap_vp_init(struct voltagedomain *voltdm); +void omap_vp_enable(struct voltagedomain *voltdm); +void omap_vp_disable(struct voltagedomain *voltdm); +int omap_vp_forceupdate_scale(struct voltagedomain *voltdm, + unsigned long target_volt); +int omap_vp_update_errorgain(struct voltagedomain *voltdm, + unsigned long target_volt); #endif diff --git a/arch/arm/mach-omap2/vp3xxx_data.c b/arch/arm/mach-omap2/vp3xxx_data.c index 645217094e51..260c554b1547 100644 --- a/arch/arm/mach-omap2/vp3xxx_data.c +++ b/arch/arm/mach-omap2/vp3xxx_data.c @@ -25,16 +25,20 @@ #include "voltage.h" #include "vp.h" +#include "prm2xxx_3xxx.h" + +static const struct omap_vp_ops omap3_vp_ops = { + .check_txdone = omap3_prm_vp_check_txdone, + .clear_txdone = omap3_prm_vp_clear_txdone, +}; /* * VP data common to 34xx/36xx chips * XXX This stuff presumably belongs in the vp3xxx.c or vp.c file. */ -static const struct omap_vp_common_data omap3_vp_common = { - .vpconfig_erroroffset_shift = OMAP3430_ERROROFFSET_SHIFT, +static const struct omap_vp_common omap3_vp_common = { + .vpconfig_erroroffset_mask = OMAP3430_ERROROFFSET_MASK, .vpconfig_errorgain_mask = OMAP3430_ERRORGAIN_MASK, - .vpconfig_errorgain_shift = OMAP3430_ERRORGAIN_SHIFT, - .vpconfig_initvoltage_shift = OMAP3430_INITVOLTAGE_SHIFT, .vpconfig_initvoltage_mask = OMAP3430_INITVOLTAGE_MASK, .vpconfig_timeouten = OMAP3430_TIMEOUTEN_MASK, .vpconfig_initvdd = OMAP3430_INITVDD_MASK, @@ -47,36 +51,29 @@ static const struct omap_vp_common_data omap3_vp_common = { .vlimitto_vddmin_shift = OMAP3430_VDDMIN_SHIFT, .vlimitto_vddmax_shift = OMAP3430_VDDMAX_SHIFT, .vlimitto_timeout_shift = OMAP3430_TIMEOUT_SHIFT, -}; + .vpvoltage_mask = OMAP3430_VPVOLTAGE_MASK, -static const struct omap_vp_prm_irqst_data omap3_vp1_prm_irqst_data = { - .prm_irqst_reg = OMAP3_PRM_IRQSTATUS_MPU_OFFSET, - .tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK, + .ops = &omap3_vp_ops, }; -struct omap_vp_instance_data omap3_vp1_data = { - .vp_common = &omap3_vp_common, +struct omap_vp_instance omap3_vp_mpu = { + .id = OMAP3_VP_VDD_MPU_ID, + .common = &omap3_vp_common, .vpconfig = OMAP3_PRM_VP1_CONFIG_OFFSET, .vstepmin = OMAP3_PRM_VP1_VSTEPMIN_OFFSET, .vstepmax = OMAP3_PRM_VP1_VSTEPMAX_OFFSET, .vlimitto = OMAP3_PRM_VP1_VLIMITTO_OFFSET, .vstatus = OMAP3_PRM_VP1_STATUS_OFFSET, .voltage = OMAP3_PRM_VP1_VOLTAGE_OFFSET, - .prm_irqst_data = &omap3_vp1_prm_irqst_data, -}; - -static const struct omap_vp_prm_irqst_data omap3_vp2_prm_irqst_data = { - .prm_irqst_reg = OMAP3_PRM_IRQSTATUS_MPU_OFFSET, - .tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK, }; -struct omap_vp_instance_data omap3_vp2_data = { - .vp_common = &omap3_vp_common, +struct omap_vp_instance omap3_vp_core = { + .id = OMAP3_VP_VDD_CORE_ID, + .common = &omap3_vp_common, .vpconfig = OMAP3_PRM_VP2_CONFIG_OFFSET, .vstepmin = OMAP3_PRM_VP2_VSTEPMIN_OFFSET, .vstepmax = OMAP3_PRM_VP2_VSTEPMAX_OFFSET, .vlimitto = OMAP3_PRM_VP2_VLIMITTO_OFFSET, .vstatus = OMAP3_PRM_VP2_STATUS_OFFSET, .voltage = OMAP3_PRM_VP2_VOLTAGE_OFFSET, - .prm_irqst_data = &omap3_vp2_prm_irqst_data, }; diff --git a/arch/arm/mach-omap2/vp44xx_data.c b/arch/arm/mach-omap2/vp44xx_data.c index 65d1ad63800a..b4e77044891e 100644 --- a/arch/arm/mach-omap2/vp44xx_data.c +++ b/arch/arm/mach-omap2/vp44xx_data.c @@ -27,15 +27,18 @@ #include "vp.h" +static const struct omap_vp_ops omap4_vp_ops = { + .check_txdone = omap4_prm_vp_check_txdone, + .clear_txdone = omap4_prm_vp_clear_txdone, +}; + /* * VP data common to 44xx chips * XXX This stuff presumably belongs in the vp44xx.c or vp.c file. */ -static const struct omap_vp_common_data omap4_vp_common = { - .vpconfig_erroroffset_shift = OMAP4430_ERROROFFSET_SHIFT, +static const struct omap_vp_common omap4_vp_common = { + .vpconfig_erroroffset_mask = OMAP4430_ERROROFFSET_MASK, .vpconfig_errorgain_mask = OMAP4430_ERRORGAIN_MASK, - .vpconfig_errorgain_shift = OMAP4430_ERRORGAIN_SHIFT, - .vpconfig_initvoltage_shift = OMAP4430_INITVOLTAGE_SHIFT, .vpconfig_initvoltage_mask = OMAP4430_INITVOLTAGE_MASK, .vpconfig_timeouten = OMAP4430_TIMEOUTEN_MASK, .vpconfig_initvdd = OMAP4430_INITVDD_MASK, @@ -48,53 +51,39 @@ static const struct omap_vp_common_data omap4_vp_common = { .vlimitto_vddmin_shift = OMAP4430_VDDMIN_SHIFT, .vlimitto_vddmax_shift = OMAP4430_VDDMAX_SHIFT, .vlimitto_timeout_shift = OMAP4430_TIMEOUT_SHIFT, + .vpvoltage_mask = OMAP4430_VPVOLTAGE_MASK, + .ops = &omap4_vp_ops, }; -static const struct omap_vp_prm_irqst_data omap4_vp_mpu_prm_irqst_data = { - .prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET, - .tranxdone_status = OMAP4430_VP_MPU_TRANXDONE_ST_MASK, -}; - -struct omap_vp_instance_data omap4_vp_mpu_data = { - .vp_common = &omap4_vp_common, +struct omap_vp_instance omap4_vp_mpu = { + .id = OMAP4_VP_VDD_MPU_ID, + .common = &omap4_vp_common, .vpconfig = OMAP4_PRM_VP_MPU_CONFIG_OFFSET, .vstepmin = OMAP4_PRM_VP_MPU_VSTEPMIN_OFFSET, .vstepmax = OMAP4_PRM_VP_MPU_VSTEPMAX_OFFSET, .vlimitto = OMAP4_PRM_VP_MPU_VLIMITTO_OFFSET, .vstatus = OMAP4_PRM_VP_MPU_STATUS_OFFSET, .voltage = OMAP4_PRM_VP_MPU_VOLTAGE_OFFSET, - .prm_irqst_data = &omap4_vp_mpu_prm_irqst_data, }; -static const struct omap_vp_prm_irqst_data omap4_vp_iva_prm_irqst_data = { - .prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET, - .tranxdone_status = OMAP4430_VP_IVA_TRANXDONE_ST_MASK, -}; - -struct omap_vp_instance_data omap4_vp_iva_data = { - .vp_common = &omap4_vp_common, +struct omap_vp_instance omap4_vp_iva = { + .id = OMAP4_VP_VDD_IVA_ID, + .common = &omap4_vp_common, .vpconfig = OMAP4_PRM_VP_IVA_CONFIG_OFFSET, .vstepmin = OMAP4_PRM_VP_IVA_VSTEPMIN_OFFSET, .vstepmax = OMAP4_PRM_VP_IVA_VSTEPMAX_OFFSET, .vlimitto = OMAP4_PRM_VP_IVA_VLIMITTO_OFFSET, .vstatus = OMAP4_PRM_VP_IVA_STATUS_OFFSET, .voltage = OMAP4_PRM_VP_IVA_VOLTAGE_OFFSET, - .prm_irqst_data = &omap4_vp_iva_prm_irqst_data, -}; - -static const struct omap_vp_prm_irqst_data omap4_vp_core_prm_irqst_data = { - .prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET, - .tranxdone_status = OMAP4430_VP_CORE_TRANXDONE_ST_MASK, }; -struct omap_vp_instance_data omap4_vp_core_data = { - .vp_common = &omap4_vp_common, +struct omap_vp_instance omap4_vp_core = { + .id = OMAP4_VP_VDD_CORE_ID, + .common = &omap4_vp_common, .vpconfig = OMAP4_PRM_VP_CORE_CONFIG_OFFSET, .vstepmin = OMAP4_PRM_VP_CORE_VSTEPMIN_OFFSET, .vstepmax = OMAP4_PRM_VP_CORE_VSTEPMAX_OFFSET, .vlimitto = OMAP4_PRM_VP_CORE_VLIMITTO_OFFSET, .vstatus = OMAP4_PRM_VP_CORE_STATUS_OFFSET, .voltage = OMAP4_PRM_VP_CORE_VOLTAGE_OFFSET, - .prm_irqst_data = &omap4_vp_core_prm_irqst_data, }; - diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index a6eddae82a0b..c105556a0ee1 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -77,7 +77,7 @@ static int __init dns323_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) /* * Check for devices with hard-wired IRQs. */ - irq = orion5x_pci_map_irq(const dev, slot, pin); + irq = orion5x_pci_map_irq(dev, slot, pin); if (irq != -1) return irq; diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index 28b8760ab9fa..bc4a920e26ee 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -14,6 +14,7 @@ #include <linux/pci.h> #include <linux/slab.h> #include <linux/mbus.h> +#include <video/vga.h> #include <asm/irq.h> #include <asm/mach/pci.h> #include <plat/pcie.h> diff --git a/arch/arm/mach-prima2/clock.c b/arch/arm/mach-prima2/clock.c index f9a2aaf63f71..615a4e75ceab 100644 --- a/arch/arm/mach-prima2/clock.c +++ b/arch/arm/mach-prima2/clock.c @@ -481,6 +481,7 @@ static void __init sirfsoc_clk_init(void) static struct of_device_id clkc_ids[] = { { .compatible = "sirf,prima2-clkc" }, + {}, }; void __init sirfsoc_of_clk_init(void) diff --git a/arch/arm/mach-prima2/irq.c b/arch/arm/mach-prima2/irq.c index c3404cbb6ff7..7af254d046ba 100644 --- a/arch/arm/mach-prima2/irq.c +++ b/arch/arm/mach-prima2/irq.c @@ -51,6 +51,7 @@ static __init void sirfsoc_irq_init(void) static struct of_device_id intc_ids[] = { { .compatible = "sirf,prima2-intc" }, + {}, }; void __init sirfsoc_of_irq_init(void) diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c index d074786e83d4..492cfa8d2610 100644 --- a/arch/arm/mach-prima2/rstc.c +++ b/arch/arm/mach-prima2/rstc.c @@ -19,6 +19,7 @@ static DEFINE_MUTEX(rstc_lock); static struct of_device_id rstc_ids[] = { { .compatible = "sirf,prima2-rstc" }, + {}, }; static int __init sirfsoc_of_rstc_init(void) diff --git a/arch/arm/mach-prima2/timer.c b/arch/arm/mach-prima2/timer.c index 44027f34a88a..ed7ec48d11da 100644 --- a/arch/arm/mach-prima2/timer.c +++ b/arch/arm/mach-prima2/timer.c @@ -190,6 +190,7 @@ static void __init sirfsoc_timer_init(void) static struct of_device_id timer_ids[] = { { .compatible = "sirf,prima2-tick" }, + {}, }; static void __init sirfsoc_of_timer_map(void) diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h index a30f2e3ec178..6657ff231161 100644 --- a/arch/arm/mach-realview/include/mach/system.h +++ b/arch/arm/mach-realview/include/mach/system.h @@ -44,6 +44,7 @@ static inline void arch_reset(char mode, const char *cmd) */ if (realview_reset) realview_reset(mode); + dsb(); } #endif diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c index a1a7176675b9..38058af48972 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c2443/clock.c @@ -128,7 +128,7 @@ static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate) unsigned long clkcon0; clkcon0 = __raw_readl(S3C2443_CLKDIV0); - clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK; + clkcon0 &= ~S3C2443_CLKDIV0_ARMDIV_MASK; clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT; __raw_writel(clkcon0, S3C2443_CLKDIV0); } diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index ecbea92bf83b..a9f3183e0290 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -262,45 +262,6 @@ static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = { .cols = 8, }; -static int smdk6410_backlight_init(struct device *dev) -{ - int ret; - - ret = gpio_request(S3C64XX_GPF(15), "Backlight"); - if (ret) { - printk(KERN_ERR "failed to request GPF for PWM-OUT1\n"); - return ret; - } - - /* Configure GPIO pin with S3C64XX_GPF15_PWM_TOUT1 */ - s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2)); - - return 0; -} - -static void smdk6410_backlight_exit(struct device *dev) -{ - s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_OUTPUT); - gpio_free(S3C64XX_GPF(15)); -} - -static struct platform_pwm_backlight_data smdk6410_backlight_data = { - .pwm_id = 1, - .max_brightness = 255, - .dft_brightness = 255, - .pwm_period_ns = 78770, - .init = smdk6410_backlight_init, - .exit = smdk6410_backlight_exit, -}; - -static struct platform_device smdk6410_backlight_device = { - .name = "pwm-backlight", - .dev = { - .parent = &s3c_device_timer[1].dev, - .platform_data = &smdk6410_backlight_data, - }, -}; - static struct map_desc smdk6410_iodesc[] = {}; static struct platform_device *smdk6410_devices[] __initdata = { diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index 8bad64370689..055e2858b0dd 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -16,6 +16,7 @@ #include <linux/suspend.h> #include <linux/serial_core.h> #include <linux/io.h> +#include <linux/gpio.h> #include <mach/map.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-s5p64x0/irq-eint.c b/arch/arm/mach-s5p64x0/irq-eint.c index 69ed4545112b..fe7380f5c3cd 100644 --- a/arch/arm/mach-s5p64x0/irq-eint.c +++ b/arch/arm/mach-s5p64x0/irq-eint.c @@ -129,7 +129,7 @@ static int s5p64x0_alloc_gc(void) } ct = gc->chip_types; - ct->chip.irq_ack = irq_gc_ack; + ct->chip.irq_ack = irq_gc_ack_set_bit; ct->chip.irq_mask = irq_gc_mask_set_bit; ct->chip.irq_unmask = irq_gc_mask_clr_bit; ct->chip.irq_set_type = s5p64x0_irq_eint_set_type; diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index 52a8e607bcc2..f5f8fa89679c 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -815,8 +815,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "s5pv210-fimc.0", + .name = "sclk_cam0", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 3), }, @@ -825,8 +824,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "s5pv210-fimc.1", + .name = "sclk_cam1", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 4), }, diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c index 309e388a8a83..f149d278377b 100644 --- a/arch/arm/mach-s5pv210/pm.c +++ b/arch/arm/mach-s5pv210/pm.c @@ -88,7 +88,7 @@ static struct sleep_save s5pv210_core_save[] = { SAVE_ITEM(S3C2410_TCNTO(0)), }; -void s5pv210_cpu_suspend(unsigned long arg) +static int s5pv210_cpu_suspend(unsigned long arg) { unsigned long tmp; diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index ce5c2513c6ce..cdfdd624d21d 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -341,6 +341,7 @@ static struct platform_device mipidsi0_device = { static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, .tmio_caps = MMC_CAP_SD_HIGHSPEED, .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29, }; @@ -382,7 +383,7 @@ void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state) } static struct sh_mobile_sdhi_info sh_sdhi1_info = { - .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE, + .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT, .tmio_caps = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ, .tmio_ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .set_pwr = ag5evm_sdhi1_set_pwr, diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 0ea71f8d4b89..17c19dc25604 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -641,6 +641,8 @@ static struct usbhs_private usbhs0_private = { }, .driver_param = { .buswait_bwait = 4, + .d0_tx_id = SHDMA_SLAVE_USB0_TX, + .d1_rx_id = SHDMA_SLAVE_USB0_RX, }, }, }; @@ -810,6 +812,8 @@ static struct usbhs_private usbhs1_private = { .buswait_bwait = 4, .pipe_type = usbhs1_pipe_cfg, .pipe_size = ARRAY_SIZE(usbhs1_pipe_cfg), + .d0_tx_id = SHDMA_SLAVE_USB1_TX, + .d1_rx_id = SHDMA_SLAVE_USB1_RX, }, }, }; diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index e6e11e4e2d43..66975921e646 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -503,16 +503,17 @@ static struct clk *late_main_clks[] = { &sh7372_fsidivb_clk, }; -enum { MSTP001, +enum { MSTP001, MSTP000, MSTP131, MSTP130, MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP117, MSTP116, MSTP113, MSTP106, MSTP101, MSTP100, MSTP223, - MSTP218, MSTP217, MSTP216, - MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, - MSTP329, MSTP328, MSTP323, MSTP322, MSTP314, MSTP313, MSTP312, - MSTP423, MSTP415, MSTP413, MSTP411, MSTP410, MSTP406, MSTP403, + MSTP218, MSTP217, MSTP216, MSTP214, MSTP208, MSTP207, + MSTP206, MSTP205, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, + MSTP328, MSTP323, MSTP322, MSTP314, MSTP313, MSTP312, + MSTP423, MSTP415, MSTP413, MSTP411, MSTP410, MSTP407, MSTP406, + MSTP405, MSTP404, MSTP403, MSTP400, MSTP_NR }; #define MSTP(_parent, _reg, _bit, _flags) \ @@ -520,6 +521,7 @@ enum { MSTP001, static struct clk mstp_clks[MSTP_NR] = { [MSTP001] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 1, 0), /* IIC2 */ + [MSTP000] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 0, 0), /* MSIOF0 */ [MSTP131] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 31, 0), /* VEU3 */ [MSTP130] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 30, 0), /* VEU2 */ [MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* VEU1 */ @@ -538,14 +540,16 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* DMAC1 */ [MSTP217] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 17, 0), /* DMAC2 */ [MSTP216] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 16, 0), /* DMAC3 */ + [MSTP214] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 14, 0), /* USBDMAC */ + [MSTP208] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 8, 0), /* MSIOF1 */ [MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */ [MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */ + [MSTP205] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 5, 0), /* MSIOF2 */ [MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */ [MSTP203] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 3, 0), /* SCIFA1 */ [MSTP202] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */ [MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */ [MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */ - [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */ [MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, 0), /* FSI2 */ [MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */ [MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */ @@ -557,8 +561,12 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP413] = MSTP(&pllc1_div2_clk, SMSTPCR4, 13, 0), /* HDMI */ [MSTP411] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 11, 0), /* IIC3 */ [MSTP410] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 10, 0), /* IIC4 */ + [MSTP407] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 7, 0), /* USB-DMAC1 */ [MSTP406] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 6, 0), /* USB1 */ + [MSTP405] = MSTP(&r_clk, SMSTPCR4, 5, 0), /* CMT4 */ + [MSTP404] = MSTP(&r_clk, SMSTPCR4, 4, 0), /* CMT3 */ [MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */ + [MSTP400] = MSTP(&r_clk, SMSTPCR4, 0, 0), /* CMT2 */ }; static struct clk_lookup lookups[] = { @@ -609,6 +617,7 @@ static struct clk_lookup lookups[] = { /* MSTP32 clocks */ CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */ + CLKDEV_DEV_ID("spi_sh_msiof.0", &mstp_clks[MSTP000]), /* MSIOF0 */ CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[MSTP131]), /* VEU3 */ CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */ CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[MSTP129]), /* VEU1 */ @@ -629,14 +638,16 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* DMAC1 */ CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP217]), /* DMAC2 */ CLKDEV_DEV_ID("sh-dma-engine.2", &mstp_clks[MSTP216]), /* DMAC3 */ + CLKDEV_DEV_ID("sh-dma-engine.3", &mstp_clks[MSTP214]), /* USB-DMAC0 */ + CLKDEV_DEV_ID("spi_sh_msiof.1", &mstp_clks[MSTP208]), /* MSIOF1 */ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */ CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP206]), /* SCIFB */ + CLKDEV_DEV_ID("spi_sh_msiof.2", &mstp_clks[MSTP205]), /* MSIOF2 */ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */ CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */ CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */ CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */ CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */ - CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */ CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */ CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */ @@ -650,10 +661,14 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-mobile-hdmi", &mstp_clks[MSTP413]), /* HDMI */ CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* IIC3 */ CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* IIC4 */ + CLKDEV_DEV_ID("sh-dma-engine.4", &mstp_clks[MSTP407]), /* USB-DMAC1 */ CLKDEV_DEV_ID("r8a66597_hcd.1", &mstp_clks[MSTP406]), /* USB1 */ CLKDEV_DEV_ID("r8a66597_udc.1", &mstp_clks[MSTP406]), /* USB1 */ CLKDEV_DEV_ID("renesas_usbhs.1", &mstp_clks[MSTP406]), /* USB1 */ + CLKDEV_DEV_ID("sh_cmt.4", &mstp_clks[MSTP405]), /* CMT4 */ + CLKDEV_DEV_ID("sh_cmt.3", &mstp_clks[MSTP404]), /* CMT3 */ CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */ + CLKDEV_DEV_ID("sh_cmt.2", &mstp_clks[MSTP400]), /* CMT2 */ CLKDEV_ICK_ID("hdmi", "sh_mobile_lcdc_fb.1", &div6_reparent_clks[DIV6_HDMI]), diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 6db2ccabc2bf..61a846bb30f2 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -365,7 +365,7 @@ void __init sh73a0_clock_init(void) __raw_writel(0x108, SD2CKCR); /* detect main clock parent */ - switch ((__raw_readl(CKSCR) >> 24) & 0x03) { + switch ((__raw_readl(CKSCR) >> 28) & 0x03) { case 0: main_clk.parent = &sh73a0_extal1_clk; break; diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h index ce595cee86cd..24e63a85e669 100644 --- a/arch/arm/mach-shmobile/include/mach/sh7372.h +++ b/arch/arm/mach-shmobile/include/mach/sh7372.h @@ -459,6 +459,10 @@ enum { SHDMA_SLAVE_SDHI2_TX, SHDMA_SLAVE_MMCIF_RX, SHDMA_SLAVE_MMCIF_TX, + SHDMA_SLAVE_USB0_TX, + SHDMA_SLAVE_USB0_RX, + SHDMA_SLAVE_USB1_TX, + SHDMA_SLAVE_USB1_RX, }; extern struct clk sh7372_extal1_clk; diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c index 3b28743c77eb..739315e30eb9 100644 --- a/arch/arm/mach-shmobile/intc-sh7372.c +++ b/arch/arm/mach-shmobile/intc-sh7372.c @@ -379,7 +379,7 @@ enum { /* BBIF2 */ VPU, TSIF1, - _3DG_SGX530, + /* 3DG */ _2DDMAC, IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2, IPMMU_IPMMUR, IPMMU_IPMMUR2, @@ -436,7 +436,7 @@ static struct intc_vect intcs_vectors[] = { /* BBIF2 */ INTCS_VECT(VPU, 0x980), INTCS_VECT(TSIF1, 0x9a0), - INTCS_VECT(_3DG_SGX530, 0x9e0), + /* 3DG */ INTCS_VECT(_2DDMAC, 0xa00), INTCS_VECT(IIC2_ALI2, 0xa80), INTCS_VECT(IIC2_TACKI2, 0xaa0), INTCS_VECT(IIC2_WAITI2, 0xac0), INTCS_VECT(IIC2_DTEI2, 0xae0), @@ -521,7 +521,7 @@ static struct intc_mask_reg intcs_mask_registers[] = { RTDMAC_1_DEI3, RTDMAC_1_DEI2, RTDMAC_1_DEI1, RTDMAC_1_DEI0 } }, { 0xffd20198, 0xffd201d8, 8, /* IMR6SA / IMCR6SA */ { 0, 0, MSIOF, 0, - _3DG_SGX530, 0, 0, 0 } }, + 0, 0, 0, 0 } }, { 0xffd2019c, 0xffd201dc, 8, /* IMR7SA / IMCR7SA */ { 0, TMU_TUNI2, TMU_TUNI1, TMU_TUNI0, 0, 0, 0, 0 } }, @@ -561,7 +561,6 @@ static struct intc_prio_reg intcs_prio_registers[] = { TMU_TUNI2, TSIF1 } }, { 0xffd2001c, 0, 16, 4, /* IPRHS */ { 0, 0, VEU, BEU } }, { 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, MSIOF, TSIF0, IIC0 } }, - { 0xffd20024, 0, 16, 4, /* IPRJS */ { 0, _3DG_SGX530, 0, 0 } }, { 0xffd20028, 0, 16, 4, /* IPRKS */ { 0, 0, LMB, 0 } }, { 0xffd2002c, 0, 16, 4, /* IPRLS */ { IPMMU, 0, 0, 0 } }, { 0xffd20030, 0, 16, 4, /* IPRMS */ { IIC2, 0, 0, 0 } }, diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 79f0413d8725..2d9b1b1a2538 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -169,35 +169,35 @@ static struct platform_device scif6_device = { }; /* CMT */ -static struct sh_timer_config cmt10_platform_data = { - .name = "CMT10", - .channel_offset = 0x10, - .timer_bit = 0, +static struct sh_timer_config cmt2_platform_data = { + .name = "CMT2", + .channel_offset = 0x40, + .timer_bit = 5, .clockevent_rating = 125, .clocksource_rating = 125, }; -static struct resource cmt10_resources[] = { +static struct resource cmt2_resources[] = { [0] = { - .name = "CMT10", - .start = 0xe6138010, - .end = 0xe613801b, + .name = "CMT2", + .start = 0xe6130040, + .end = 0xe613004b, .flags = IORESOURCE_MEM, }, [1] = { - .start = evt2irq(0x0b00), /* CMT1_CMT10 */ + .start = evt2irq(0x0b80), /* CMT2 */ .flags = IORESOURCE_IRQ, }, }; -static struct platform_device cmt10_device = { +static struct platform_device cmt2_device = { .name = "sh_cmt", - .id = 10, + .id = 2, .dev = { - .platform_data = &cmt10_platform_data, + .platform_data = &cmt2_platform_data, }, - .resource = cmt10_resources, - .num_resources = ARRAY_SIZE(cmt10_resources), + .resource = cmt2_resources, + .num_resources = ARRAY_SIZE(cmt2_resources), }; /* TMU */ @@ -602,6 +602,150 @@ static struct platform_device dma2_device = { }, }; +/* + * USB-DMAC + */ + +unsigned int usbts_shift[] = {3, 4, 5}; + +enum { + XMIT_SZ_8BYTE = 0, + XMIT_SZ_16BYTE = 1, + XMIT_SZ_32BYTE = 2, +}; + +#define USBTS_INDEX2VAL(i) (((i) & 3) << 6) + +static const struct sh_dmae_channel sh7372_usb_dmae_channels[] = { + { + .offset = 0, + }, { + .offset = 0x20, + }, +}; + +/* USB DMAC0 */ +static const struct sh_dmae_slave_config sh7372_usb_dmae0_slaves[] = { + { + .slave_id = SHDMA_SLAVE_USB0_TX, + .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + }, { + .slave_id = SHDMA_SLAVE_USB0_RX, + .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + }, +}; + +static struct sh_dmae_pdata usb_dma0_platform_data = { + .slave = sh7372_usb_dmae0_slaves, + .slave_num = ARRAY_SIZE(sh7372_usb_dmae0_slaves), + .channel = sh7372_usb_dmae_channels, + .channel_num = ARRAY_SIZE(sh7372_usb_dmae_channels), + .ts_low_shift = 6, + .ts_low_mask = 0xc0, + .ts_high_shift = 0, + .ts_high_mask = 0, + .ts_shift = usbts_shift, + .ts_shift_num = ARRAY_SIZE(usbts_shift), + .dmaor_init = DMAOR_DME, + .chcr_offset = 0x14, + .chcr_ie_bit = 1 << 5, + .dmaor_is_32bit = 1, + .needs_tend_set = 1, + .no_dmars = 1, +}; + +static struct resource sh7372_usb_dmae0_resources[] = { + { + /* Channel registers and DMAOR */ + .start = 0xe68a0020, + .end = 0xe68a0064 - 1, + .flags = IORESOURCE_MEM, + }, + { + /* VCR/SWR/DMICR */ + .start = 0xe68a0000, + .end = 0xe68a0014 - 1, + .flags = IORESOURCE_MEM, + }, + { + /* IRQ for channels */ + .start = evt2irq(0x0a00), + .end = evt2irq(0x0a00), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usb_dma0_device = { + .name = "sh-dma-engine", + .id = 3, + .resource = sh7372_usb_dmae0_resources, + .num_resources = ARRAY_SIZE(sh7372_usb_dmae0_resources), + .dev = { + .platform_data = &usb_dma0_platform_data, + }, +}; + +/* USB DMAC1 */ +static const struct sh_dmae_slave_config sh7372_usb_dmae1_slaves[] = { + { + .slave_id = SHDMA_SLAVE_USB1_TX, + .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + }, { + .slave_id = SHDMA_SLAVE_USB1_RX, + .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + }, +}; + +static struct sh_dmae_pdata usb_dma1_platform_data = { + .slave = sh7372_usb_dmae1_slaves, + .slave_num = ARRAY_SIZE(sh7372_usb_dmae1_slaves), + .channel = sh7372_usb_dmae_channels, + .channel_num = ARRAY_SIZE(sh7372_usb_dmae_channels), + .ts_low_shift = 6, + .ts_low_mask = 0xc0, + .ts_high_shift = 0, + .ts_high_mask = 0, + .ts_shift = usbts_shift, + .ts_shift_num = ARRAY_SIZE(usbts_shift), + .dmaor_init = DMAOR_DME, + .chcr_offset = 0x14, + .chcr_ie_bit = 1 << 5, + .dmaor_is_32bit = 1, + .needs_tend_set = 1, + .no_dmars = 1, +}; + +static struct resource sh7372_usb_dmae1_resources[] = { + { + /* Channel registers and DMAOR */ + .start = 0xe68c0020, + .end = 0xe68c0064 - 1, + .flags = IORESOURCE_MEM, + }, + { + /* VCR/SWR/DMICR */ + .start = 0xe68c0000, + .end = 0xe68c0014 - 1, + .flags = IORESOURCE_MEM, + }, + { + /* IRQ for channels */ + .start = evt2irq(0x1d00), + .end = evt2irq(0x1d00), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usb_dma1_device = { + .name = "sh-dma-engine", + .id = 4, + .resource = sh7372_usb_dmae1_resources, + .num_resources = ARRAY_SIZE(sh7372_usb_dmae1_resources), + .dev = { + .platform_data = &usb_dma1_platform_data, + }, +}; + /* VPU */ static struct uio_info vpu_platform_data = { .name = "VPU5HG", @@ -818,7 +962,7 @@ static struct platform_device *sh7372_early_devices[] __initdata = { &scif4_device, &scif5_device, &scif6_device, - &cmt10_device, + &cmt2_device, &tmu00_device, &tmu01_device, }; @@ -829,6 +973,8 @@ static struct platform_device *sh7372_late_devices[] __initdata = { &dma0_device, &dma1_device, &dma2_device, + &usb_dma0_device, + &usb_dma1_device, &vpu_device, &veu0_device, &veu1_device, diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 9e6b93b1a043..d0d267a8d3f9 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -318,6 +318,10 @@ static struct clk v2m_sp804_clk = { .rate = 1000000, }; +static struct clk v2m_ref_clk = { + .rate = 32768, +}; + static struct clk dummy_apb_pclk; static struct clk_lookup v2m_lookups[] = { @@ -348,6 +352,9 @@ static struct clk_lookup v2m_lookups[] = { }, { /* CLCD */ .dev_id = "mb:clcd", .clk = &osc1_clk, + }, { /* SP805 WDT */ + .dev_id = "mb:wdt", + .clk = &v2m_ref_clk, }, { /* SP804 timers */ .dev_id = "sp804", .con_id = "v2m-timer0", diff --git a/arch/arm/mm/abort-macro.S b/arch/arm/mm/abort-macro.S index 52162d59407a..2cbf68ef0e83 100644 --- a/arch/arm/mm/abort-macro.S +++ b/arch/arm/mm/abort-macro.S @@ -17,7 +17,7 @@ cmp \tmp, # 0x5600 @ Is it ldrsb? orreq \tmp, \tmp, #1 << 11 @ Set L-bit if yes tst \tmp, #1 << 11 @ L = 0 -> write - orreq \psr, \psr, #1 << 11 @ yes. + orreq \fsr, \fsr, #1 << 11 @ yes. b do_DataAbort not_thumb: .endm diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 44c086710d2b..9ecfdb511951 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -277,6 +277,25 @@ static void l2x0_disable(void) spin_unlock_irqrestore(&l2x0_lock, flags); } +static void __init l2x0_unlock(__u32 cache_id) +{ + int lockregs; + int i; + + if (cache_id == L2X0_CACHE_ID_PART_L310) + lockregs = 8; + else + /* L210 and unknown types */ + lockregs = 1; + + for (i = 0; i < lockregs; i++) { + writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE + + i * L2X0_LOCKDOWN_STRIDE); + writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE + + i * L2X0_LOCKDOWN_STRIDE); + } +} + void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) { __u32 aux; @@ -328,6 +347,8 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) * accessing the below registers will fault. */ if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) { + /* Make sure that I&D is not locked down when starting */ + l2x0_unlock(cache_id); /* l2x0 controller is disabled */ writel_relaxed(aux, l2x0_base + L2X0_AUX_CTRL); diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 3b24bfa3b828..07c4bc8ea0a4 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -174,6 +174,10 @@ ENTRY(v7_coherent_user_range) dcache_line_size r2, r3 sub r3, r2, #1 bic r12, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: USER( mcr p15, 0, r12, c7, c11, 1 ) @ clean D line to the point of unification add r12, r12, r2 @@ -223,6 +227,10 @@ ENTRY(v7_flush_kern_dcache_area) add r1, r0, r1 sub r3, r2, #1 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line / unified line add r0, r0, r2 @@ -247,6 +255,10 @@ v7_dma_inv_range: sub r3, r2, #1 tst r0, r3 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif mcrne p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line tst r1, r3 @@ -270,6 +282,10 @@ v7_dma_clean_range: dcache_line_size r2, r3 sub r3, r2, #1 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: mcr p15, 0, r0, c7, c10, 1 @ clean D / U line add r0, r0, r2 @@ -288,6 +304,10 @@ ENTRY(v7_dma_flush_range) dcache_line_size r2, r3 sub r3, r2, #1 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line add r0, r0, r2 diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 0a0a1e7c20d2..c3ff82f92d9c 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -324,6 +324,8 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, if (addr) *handle = pfn_to_dma(dev, page_to_pfn(page)); + else + __dma_free_buffer(page, size); return addr; } diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 91bca355cd31..cc7e2d8be9aa 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -298,7 +298,7 @@ static void __init arm_bootmem_free(unsigned long min, unsigned long max_low, #ifdef CONFIG_HAVE_ARCH_PFN_VALID int pfn_valid(unsigned long pfn) { - return memblock_is_memory(pfn << PAGE_SHIFT); + return memblock_is_memory(__pfn_to_phys(pfn)); } EXPORT_SYMBOL(pfn_valid); #endif diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index 92bd102e3982..2e6849b41f66 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -379,7 +379,7 @@ ENTRY(cpu_arm920_set_pte_ext) /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */ .globl cpu_arm920_suspend_size -.equ cpu_arm920_suspend_size, 4 * 3 +.equ cpu_arm920_suspend_size, 4 * 4 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_arm920_do_suspend) stmfd sp!, {r4 - r7, lr} diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 2bbcf053dffd..cd8f79c3a282 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -394,7 +394,7 @@ ENTRY(cpu_arm926_set_pte_ext) /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */ .globl cpu_arm926_suspend_size -.equ cpu_arm926_suspend_size, 4 * 3 +.equ cpu_arm926_suspend_size, 4 * 4 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_arm926_do_suspend) stmfd sp!, {r4 - r7, lr} diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index 07219c2ae114..69e7f2ef7384 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -182,11 +182,11 @@ ENDPROC(cpu_sa1100_do_suspend) ENTRY(cpu_sa1100_do_resume) ldmia r0, {r4 - r7} @ load cp regs - mov r1, #0 - mcr p15, 0, r1, c8, c7, 0 @ flush I+D TLBs - mcr p15, 0, r1, c7, c7, 0 @ flush I&D cache - mcr p15, 0, r1, c9, c0, 0 @ invalidate RB - mcr p15, 0, r1, c9, c0, 5 @ allow user space to use RB + mov ip, #0 + mcr p15, 0, ip, c8, c7, 0 @ flush I+D TLBs + mcr p15, 0, ip, c7, c7, 0 @ flush I&D cache + mcr p15, 0, ip, c9, c0, 0 @ invalidate RB + mcr p15, 0, ip, c9, c0, 5 @ allow user space to use RB mcr p15, 0, r4, c3, c0, 0 @ domain ID mcr p15, 0, r5, c2, c0, 0 @ translation table base addr diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 219138d2f158..a923aa0fd00d 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -223,6 +223,22 @@ __v6_setup: mrc p15, 0, r0, c1, c0, 0 @ read control register bic r0, r0, r5 @ clear bits them orr r0, r0, r6 @ set them +#ifdef CONFIG_ARM_ERRATA_364296 + /* + * Workaround for the 364296 ARM1136 r0p2 erratum (possible cache data + * corruption with hit-under-miss enabled). The conditional code below + * (setting the undocumented bit 31 in the auxiliary control register + * and the FI bit in the control register) disables hit-under-miss + * without putting the processor into full low interrupt latency mode. + */ + ldr r6, =0x4107b362 @ id for ARM1136 r0p2 + mrc p15, 0, r5, c0, c0, 0 @ get processor id + teq r5, r6 @ check for the faulty core + mrceq p15, 0, r5, c1, c0, 1 @ load aux control reg + orreq r5, r5, #(1 << 31) @ set the undocumented bit 31 + mcreq p15, 0, r5, c1, c0, 1 @ write aux control reg + orreq r0, r0, #(1 << 21) @ low interrupt latency configuration +#endif mov pc, lr @ return to head.S:__ret /* diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index a30e78542ccf..9049c0764db2 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -66,6 +66,7 @@ ENDPROC(cpu_v7_proc_fin) ENTRY(cpu_v7_reset) mrc p15, 0, r1, c1, c0, 0 @ ctrl register bic r1, r1, #0x1 @ ...............m + THUMB( bic r1, r1, #1 << 30 ) @ SCTLR.TE (Thumb exceptions) mcr p15, 0, r1, c1, c0, 0 @ disable MMU isb mov pc, r0 @@ -247,13 +248,16 @@ ENTRY(cpu_v7_do_resume) mcr p15, 0, r7, c2, c0, 0 @ TTB 0 mcr p15, 0, r8, c2, c0, 1 @ TTB 1 mcr p15, 0, ip, c2, c0, 2 @ TTB control register - mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register + mrc p15, 0, r4, c1, c0, 1 @ Read Auxiliary control register + teq r4, r10 @ Is it already set? + mcrne p15, 0, r10, c1, c0, 1 @ No, so write it mcr p15, 0, r11, c1, c0, 2 @ Co-processor access control ldr r4, =PRRR @ PRRR ldr r5, =NMRR @ NMRR mcr p15, 0, r4, c10, c2, 0 @ write PRRR mcr p15, 0, r5, c10, c2, 1 @ write NMRR isb + dsb mov r0, r9 @ control register mov r2, r7, lsr #14 @ get TTB0 base mov r2, r2, lsl #14 diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index 28c72a2006a1..755e1bf22681 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -406,7 +406,7 @@ ENTRY(cpu_xsc3_set_pte_ext) .align .globl cpu_xsc3_suspend_size -.equ cpu_xsc3_suspend_size, 4 * 8 +.equ cpu_xsc3_suspend_size, 4 * 7 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_xsc3_do_suspend) stmfd sp!, {r4 - r10, lr} @@ -418,12 +418,12 @@ ENTRY(cpu_xsc3_do_suspend) mrc p15, 0, r9, c1, c0, 1 @ auxiliary control reg mrc p15, 0, r10, c1, c0, 0 @ control reg bic r4, r4, #2 @ clear frequency change bit - stmia r0, {r1, r4 - r10} @ store v:p offset + cp regs + stmia r0, {r4 - r10} @ store cp regs ldmia sp!, {r4 - r10, pc} ENDPROC(cpu_xsc3_do_suspend) ENTRY(cpu_xsc3_do_resume) - ldmia r0, {r1, r4 - r10} @ load v:p offset + cp regs + ldmia r0, {r4 - r10} @ load cp regs mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB mcr p15, 0, ip, c7, c10, 4 @ drain write (&fill) buffer diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index ea28f98d5d6a..bd9a06b3ee89 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -26,54 +26,8 @@ #include <plat/mmc.h> #include <mach/gpio.h> #include <plat/menelaus.h> -#include <plat/mcbsp.h> #include <plat/omap44xx.h> -/*-------------------------------------------------------------------------*/ - -#if defined(CONFIG_OMAP_MCBSP) || defined(CONFIG_OMAP_MCBSP_MODULE) - -static struct platform_device **omap_mcbsp_devices; - -void omap_mcbsp_register_board_cfg(struct resource *res, int res_count, - struct omap_mcbsp_platform_data *config, int size) -{ - int i; - - omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *), - GFP_KERNEL); - if (!omap_mcbsp_devices) { - printk(KERN_ERR "Could not register McBSP devices\n"); - return; - } - - for (i = 0; i < size; i++) { - struct platform_device *new_mcbsp; - int ret; - - new_mcbsp = platform_device_alloc("omap-mcbsp", i + 1); - if (!new_mcbsp) - continue; - platform_device_add_resources(new_mcbsp, &res[i * res_count], - res_count); - new_mcbsp->dev.platform_data = &config[i]; - ret = platform_device_add(new_mcbsp); - if (ret) { - platform_device_put(new_mcbsp); - continue; - } - omap_mcbsp_devices[i] = new_mcbsp; - } -} - -#else -void omap_mcbsp_register_board_cfg(struct resource *res, int res_count, - struct omap_mcbsp_platform_data *config, int size) -{ } -#endif - -/*-------------------------------------------------------------------------*/ - #if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \ defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE) diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index 3341ca4703e9..0c7caf2458b4 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -135,7 +135,7 @@ static inline int omap2_i2c_add_bus(int bus_id) { int l; struct omap_hwmod *oh; - struct omap_device *od; + struct platform_device *pdev; char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN]; struct omap_i2c_bus_platform_data *pdata; @@ -160,12 +160,12 @@ static inline int omap2_i2c_add_bus(int bus_id) */ if (cpu_is_omap34xx()) pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat; - od = omap_device_build(name, bus_id, oh, pdata, + pdev = omap_device_build(name, bus_id, oh, pdata, sizeof(struct omap_i2c_bus_platform_data), omap_i2c_latency, ARRAY_SIZE(omap_i2c_latency), 0); - WARN(IS_ERR(od), "Could not build omap_device for %s\n", name); + WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name); - return PTR_ERR(od); + return PTR_ERR(pdev); } #else static inline int omap2_i2c_add_bus(int bus_id) diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index 5cac97e36079..abda2c7e499b 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -83,7 +83,11 @@ void omap2_set_globals_sdrc(struct omap_globals *); void omap2_set_globals_control(struct omap_globals *); void omap2_set_globals_prcm(struct omap_globals *); +void omap242x_map_io(void); +void omap243x_map_io(void); void omap3_map_io(void); +void omap4_map_io(void); + /** * omap_test_timeout - busy-loop, testing a condition diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h index 75311fc9c018..6591875486d5 100644 --- a/arch/arm/plat-omap/include/plat/io.h +++ b/arch/arm/plat-omap/include/plat/io.h @@ -228,13 +228,13 @@ #define OMAP44XX_EMIF2_PHYS OMAP44XX_EMIF2_BASE /* 0x4d000000 --> 0xfd200000 */ -#define OMAP44XX_EMIF2_VIRT (OMAP44XX_EMIF2_PHYS + OMAP4_L3_PER_IO_OFFSET) #define OMAP44XX_EMIF2_SIZE SZ_1M +#define OMAP44XX_EMIF2_VIRT (OMAP44XX_EMIF1_VIRT + OMAP44XX_EMIF1_SIZE) #define OMAP44XX_DMM_PHYS OMAP44XX_DMM_BASE /* 0x4e000000 --> 0xfd300000 */ -#define OMAP44XX_DMM_VIRT (OMAP44XX_DMM_PHYS + OMAP4_L3_PER_IO_OFFSET) #define OMAP44XX_DMM_SIZE SZ_1M +#define OMAP44XX_DMM_VIRT (OMAP44XX_EMIF2_VIRT + OMAP44XX_EMIF2_SIZE) /* * ---------------------------------------------------------------------------- * Omap specific register access diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h index 9882c657b2d4..8fa74e2c9d6e 100644 --- a/arch/arm/plat-omap/include/plat/mcbsp.h +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -25,9 +25,7 @@ #define __ASM_ARCH_OMAP_MCBSP_H #include <linux/spinlock.h> - -#include <mach/hardware.h> -#include <plat/clock.h> +#include <linux/clk.h> /* macro for building platform_device for McBSP ports */ #define OMAP_MCBSP_PLATFORM_DEVICE(port_nr) \ @@ -40,104 +38,60 @@ static struct platform_device omap_mcbsp##port_nr = { \ #define MCBSP_CONFIG_TYPE3 0x3 #define MCBSP_CONFIG_TYPE4 0x4 -#define OMAP7XX_MCBSP1_BASE 0xfffb1000 -#define OMAP7XX_MCBSP2_BASE 0xfffb1800 - -#define OMAP1510_MCBSP1_BASE 0xe1011800 -#define OMAP1510_MCBSP2_BASE 0xfffb1000 -#define OMAP1510_MCBSP3_BASE 0xe1017000 - -#define OMAP1610_MCBSP1_BASE 0xe1011800 -#define OMAP1610_MCBSP2_BASE 0xfffb1000 -#define OMAP1610_MCBSP3_BASE 0xe1017000 - -#ifdef CONFIG_ARCH_OMAP1 - -#define OMAP_MCBSP_REG_DRR2 0x00 -#define OMAP_MCBSP_REG_DRR1 0x02 -#define OMAP_MCBSP_REG_DXR2 0x04 -#define OMAP_MCBSP_REG_DXR1 0x06 -#define OMAP_MCBSP_REG_DRR 0x02 -#define OMAP_MCBSP_REG_DXR 0x06 -#define OMAP_MCBSP_REG_SPCR2 0x08 -#define OMAP_MCBSP_REG_SPCR1 0x0a -#define OMAP_MCBSP_REG_RCR2 0x0c -#define OMAP_MCBSP_REG_RCR1 0x0e -#define OMAP_MCBSP_REG_XCR2 0x10 -#define OMAP_MCBSP_REG_XCR1 0x12 -#define OMAP_MCBSP_REG_SRGR2 0x14 -#define OMAP_MCBSP_REG_SRGR1 0x16 -#define OMAP_MCBSP_REG_MCR2 0x18 -#define OMAP_MCBSP_REG_MCR1 0x1a -#define OMAP_MCBSP_REG_RCERA 0x1c -#define OMAP_MCBSP_REG_RCERB 0x1e -#define OMAP_MCBSP_REG_XCERA 0x20 -#define OMAP_MCBSP_REG_XCERB 0x22 -#define OMAP_MCBSP_REG_PCR0 0x24 -#define OMAP_MCBSP_REG_RCERC 0x26 -#define OMAP_MCBSP_REG_RCERD 0x28 -#define OMAP_MCBSP_REG_XCERC 0x2A -#define OMAP_MCBSP_REG_XCERD 0x2C -#define OMAP_MCBSP_REG_RCERE 0x2E -#define OMAP_MCBSP_REG_RCERF 0x30 -#define OMAP_MCBSP_REG_XCERE 0x32 -#define OMAP_MCBSP_REG_XCERF 0x34 -#define OMAP_MCBSP_REG_RCERG 0x36 -#define OMAP_MCBSP_REG_RCERH 0x38 -#define OMAP_MCBSP_REG_XCERG 0x3A -#define OMAP_MCBSP_REG_XCERH 0x3C - -/* Dummy defines, these are not available on omap1 */ -#define OMAP_MCBSP_REG_XCCR 0x00 -#define OMAP_MCBSP_REG_RCCR 0x00 - -#else - -#define OMAP_MCBSP_REG_DRR2 0x00 -#define OMAP_MCBSP_REG_DRR1 0x04 -#define OMAP_MCBSP_REG_DXR2 0x08 -#define OMAP_MCBSP_REG_DXR1 0x0C -#define OMAP_MCBSP_REG_DRR 0x00 -#define OMAP_MCBSP_REG_DXR 0x08 -#define OMAP_MCBSP_REG_SPCR2 0x10 -#define OMAP_MCBSP_REG_SPCR1 0x14 -#define OMAP_MCBSP_REG_RCR2 0x18 -#define OMAP_MCBSP_REG_RCR1 0x1C -#define OMAP_MCBSP_REG_XCR2 0x20 -#define OMAP_MCBSP_REG_XCR1 0x24 -#define OMAP_MCBSP_REG_SRGR2 0x28 -#define OMAP_MCBSP_REG_SRGR1 0x2C -#define OMAP_MCBSP_REG_MCR2 0x30 -#define OMAP_MCBSP_REG_MCR1 0x34 -#define OMAP_MCBSP_REG_RCERA 0x38 -#define OMAP_MCBSP_REG_RCERB 0x3C -#define OMAP_MCBSP_REG_XCERA 0x40 -#define OMAP_MCBSP_REG_XCERB 0x44 -#define OMAP_MCBSP_REG_PCR0 0x48 -#define OMAP_MCBSP_REG_RCERC 0x4C -#define OMAP_MCBSP_REG_RCERD 0x50 -#define OMAP_MCBSP_REG_XCERC 0x54 -#define OMAP_MCBSP_REG_XCERD 0x58 -#define OMAP_MCBSP_REG_RCERE 0x5C -#define OMAP_MCBSP_REG_RCERF 0x60 -#define OMAP_MCBSP_REG_XCERE 0x64 -#define OMAP_MCBSP_REG_XCERF 0x68 -#define OMAP_MCBSP_REG_RCERG 0x6C -#define OMAP_MCBSP_REG_RCERH 0x70 -#define OMAP_MCBSP_REG_XCERG 0x74 -#define OMAP_MCBSP_REG_XCERH 0x78 -#define OMAP_MCBSP_REG_SYSCON 0x8C -#define OMAP_MCBSP_REG_THRSH2 0x90 -#define OMAP_MCBSP_REG_THRSH1 0x94 -#define OMAP_MCBSP_REG_IRQST 0xA0 -#define OMAP_MCBSP_REG_IRQEN 0xA4 -#define OMAP_MCBSP_REG_WAKEUPEN 0xA8 -#define OMAP_MCBSP_REG_XCCR 0xAC -#define OMAP_MCBSP_REG_RCCR 0xB0 -#define OMAP_MCBSP_REG_XBUFFSTAT 0xB4 -#define OMAP_MCBSP_REG_RBUFFSTAT 0xB8 -#define OMAP_MCBSP_REG_SSELCR 0xBC +/* McBSP register numbers. Register address offset = num * reg_step */ +enum { + /* Common registers */ + OMAP_MCBSP_REG_SPCR2 = 4, + OMAP_MCBSP_REG_SPCR1, + OMAP_MCBSP_REG_RCR2, + OMAP_MCBSP_REG_RCR1, + OMAP_MCBSP_REG_XCR2, + OMAP_MCBSP_REG_XCR1, + OMAP_MCBSP_REG_SRGR2, + OMAP_MCBSP_REG_SRGR1, + OMAP_MCBSP_REG_MCR2, + OMAP_MCBSP_REG_MCR1, + OMAP_MCBSP_REG_RCERA, + OMAP_MCBSP_REG_RCERB, + OMAP_MCBSP_REG_XCERA, + OMAP_MCBSP_REG_XCERB, + OMAP_MCBSP_REG_PCR0, + OMAP_MCBSP_REG_RCERC, + OMAP_MCBSP_REG_RCERD, + OMAP_MCBSP_REG_XCERC, + OMAP_MCBSP_REG_XCERD, + OMAP_MCBSP_REG_RCERE, + OMAP_MCBSP_REG_RCERF, + OMAP_MCBSP_REG_XCERE, + OMAP_MCBSP_REG_XCERF, + OMAP_MCBSP_REG_RCERG, + OMAP_MCBSP_REG_RCERH, + OMAP_MCBSP_REG_XCERG, + OMAP_MCBSP_REG_XCERH, + + /* OMAP1-OMAP2420 registers */ + OMAP_MCBSP_REG_DRR2 = 0, + OMAP_MCBSP_REG_DRR1, + OMAP_MCBSP_REG_DXR2, + OMAP_MCBSP_REG_DXR1, + + /* OMAP2430 and onwards */ + OMAP_MCBSP_REG_DRR = 0, + OMAP_MCBSP_REG_DXR = 2, + OMAP_MCBSP_REG_SYSCON = 35, + OMAP_MCBSP_REG_THRSH2, + OMAP_MCBSP_REG_THRSH1, + OMAP_MCBSP_REG_IRQST = 40, + OMAP_MCBSP_REG_IRQEN, + OMAP_MCBSP_REG_WAKEUPEN, + OMAP_MCBSP_REG_XCCR, + OMAP_MCBSP_REG_RCCR, + OMAP_MCBSP_REG_XBUFFSTAT, + OMAP_MCBSP_REG_RBUFFSTAT, + OMAP_MCBSP_REG_SSELCR, +}; +/* OMAP3 sidetone control registers */ #define OMAP_ST_REG_REV 0x00 #define OMAP_ST_REG_SYSCONFIG 0x10 #define OMAP_ST_REG_IRQSTATUS 0x18 @@ -146,8 +100,6 @@ static struct platform_device omap_mcbsp##port_nr = { \ #define OMAP_ST_REG_SFIRCR 0x28 #define OMAP_ST_REG_SSELCR 0x2C -#endif - /************************** McBSP SPCR1 bit definitions ***********************/ #define RRST 0x0001 #define RRDY 0x0002 @@ -344,20 +296,20 @@ typedef enum { struct omap_mcbsp_ops { void (*request)(unsigned int); void (*free)(unsigned int); - int (*set_clks_src)(u8, u8); }; struct omap_mcbsp_platform_data { - unsigned long phys_base; - u8 dma_rx_sync, dma_tx_sync; - u16 rx_irq, tx_irq; struct omap_mcbsp_ops *ops; -#ifdef CONFIG_ARCH_OMAP3 - /* Sidetone block for McBSP 2 and 3 */ - unsigned long phys_base_st; -#endif u16 buffer_size; - unsigned int mcbsp_config_type; + u8 reg_size; + u8 reg_step; + + /* McBSP platform and instance specific features */ + bool has_wakeup; /* Wakeup capability */ + bool has_ccr; /* Transceiver has configuration control registers */ + int (*enable_st_clock)(unsigned int, bool); + int (*set_clk_src)(struct device *dev, struct clk *clk, const char *src); + int (*mux_signal)(struct device *dev, const char *signal, const char *src); }; struct omap_mcbsp_st_data { @@ -389,14 +341,12 @@ struct omap_mcbsp { spinlock_t lock; struct omap_mcbsp_platform_data *pdata; struct clk *fclk; -#ifdef CONFIG_ARCH_OMAP3 struct omap_mcbsp_st_data *st_data; int dma_op_mode; u16 max_tx_thres; u16 max_rx_thres; -#endif void *reg_cache; - unsigned int mcbsp_config_type; + int reg_cache_size; }; /** @@ -408,16 +358,10 @@ struct omap_mcbsp_dev_attr { }; extern struct omap_mcbsp **mcbsp_ptr; -extern int omap_mcbsp_count, omap_mcbsp_cache_size; - -#define omap_mcbsp_check_valid_id(id) (id < omap_mcbsp_count) -#define id_to_mcbsp_ptr(id) mcbsp_ptr[id]; +extern int omap_mcbsp_count; int omap_mcbsp_init(void); -void omap_mcbsp_register_board_cfg(struct resource *res, int res_count, - struct omap_mcbsp_platform_data *config, int size); void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config); -#ifdef CONFIG_ARCH_OMAP3 void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold); void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold); u16 omap_mcbsp_get_max_tx_threshold(unsigned int id); @@ -426,18 +370,6 @@ u16 omap_mcbsp_get_fifo_size(unsigned int id); u16 omap_mcbsp_get_tx_delay(unsigned int id); u16 omap_mcbsp_get_rx_delay(unsigned int id); int omap_mcbsp_get_dma_op_mode(unsigned int id); -#else -static inline void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold) -{ } -static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold) -{ } -static inline u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) { return 0; } -static inline u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) { return 0; } -static inline u16 omap_mcbsp_get_fifo_size(unsigned int id) { return 0; } -static inline u16 omap_mcbsp_get_tx_delay(unsigned int id) { return 0; } -static inline u16 omap_mcbsp_get_rx_delay(unsigned int id) { return 0; } -static inline int omap_mcbsp_get_dma_op_mode(unsigned int id) { return 0; } -#endif int omap_mcbsp_request(unsigned int id); void omap_mcbsp_free(unsigned int id); void omap_mcbsp_start(unsigned int id, int tx, int rx); @@ -453,21 +385,11 @@ void omap2_mcbsp1_mux_fsr_src(u8 mux); int omap_mcbsp_dma_ch_params(unsigned int id, unsigned int stream); int omap_mcbsp_dma_reg_params(unsigned int id, unsigned int stream); -#ifdef CONFIG_ARCH_OMAP3 /* Sidetone specific API */ int omap_st_set_chgain(unsigned int id, int channel, s16 chgain); int omap_st_get_chgain(unsigned int id, int channel, s16 *chgain); int omap_st_enable(unsigned int id); int omap_st_disable(unsigned int id); int omap_st_is_enabled(unsigned int id); -#else -static inline int omap_st_set_chgain(unsigned int id, int channel, - s16 chgain) { return 0; } -static inline int omap_st_get_chgain(unsigned int id, int channel, - s16 *chgain) { return 0; } -static inline int omap_st_enable(unsigned int id) { return 0; } -static inline int omap_st_disable(unsigned int id) { return 0; } -static inline int omap_st_is_enabled(unsigned int id) { return 0; } -#endif #endif diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h index ee405b36df4b..d4d9b96f961e 100644 --- a/arch/arm/plat-omap/include/plat/omap_device.h +++ b/arch/arm/plat-omap/include/plat/omap_device.h @@ -68,7 +68,7 @@ extern struct device omap_device_parent; * */ struct omap_device { - struct platform_device pdev; + struct platform_device *pdev; struct omap_hwmod **hwmods; struct omap_device_pm_latency *pm_lats; u32 dev_wakeup_lat; @@ -88,24 +88,18 @@ int omap_device_shutdown(struct platform_device *pdev); /* Core code interface */ -int omap_device_count_resources(struct omap_device *od); -int omap_device_fill_resources(struct omap_device *od, struct resource *res); - -struct omap_device *omap_device_build(const char *pdev_name, int pdev_id, +struct platform_device *omap_device_build(const char *pdev_name, int pdev_id, struct omap_hwmod *oh, void *pdata, int pdata_len, struct omap_device_pm_latency *pm_lats, int pm_lats_cnt, int is_early_device); -struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id, +struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id, struct omap_hwmod **oh, int oh_cnt, void *pdata, int pdata_len, struct omap_device_pm_latency *pm_lats, int pm_lats_cnt, int is_early_device); -int omap_device_register(struct omap_device *od); -int omap_early_device_register(struct omap_device *od); - void __iomem *omap_device_get_rt_va(struct omap_device *od); /* OMAP PM interface */ @@ -122,11 +116,6 @@ int omap_device_enable_hwmods(struct omap_device *od); int omap_device_disable_clocks(struct omap_device *od); int omap_device_enable_clocks(struct omap_device *od); -static inline void omap_device_disable_idle_on_suspend(struct omap_device *od) -{ - od->flags |= OMAP_DEVICE_NO_IDLE_ON_SUSPEND; -} - /* * Entries should be kept in latency order ascending * @@ -157,6 +146,17 @@ struct omap_device_pm_latency { #define OMAP_DEVICE_LATENCY_AUTO_ADJUST BIT(1) /* Get omap_device pointer from platform_device pointer */ -#define to_omap_device(x) container_of((x), struct omap_device, pdev) +static inline struct omap_device *to_omap_device(struct platform_device *pdev) +{ + return pdev ? pdev->archdata.od : NULL; +} + +static inline +void omap_device_disable_idle_on_suspend(struct platform_device *pdev) +{ + struct omap_device *od = to_omap_device(pdev); + + od->flags |= OMAP_DEVICE_NO_IDLE_ON_SUSPEND; +} #endif diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 9115aedd2124..5419f1a2aaa4 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -525,7 +525,6 @@ struct omap_hwmod { char *clkdm_name; struct clockdomain *clkdm; char *vdd_name; - struct voltagedomain *voltdm; struct omap_hwmod_ocp_if **masters; /* connect to *_IA */ struct omap_hwmod_ocp_if **slaves; /* connect to *_TA */ void *dev_attr; diff --git a/arch/arm/plat-omap/include/plat/voltage.h b/arch/arm/plat-omap/include/plat/voltage.h new file mode 100644 index 000000000000..0a6a482ec014 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/voltage.h @@ -0,0 +1,20 @@ +/* + * OMAP Voltage Management Routines + * + * Copyright (C) 2011, Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_OMAP_VOLTAGE_H +#define __ARCH_ARM_OMAP_VOLTAGE_H + +struct voltagedomain; + +struct voltagedomain *voltdm_lookup(const char *name); +int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt); +unsigned long voltdm_get_voltage(struct voltagedomain *voltdm); + +#endif diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 6c62af108710..4b15cd7926d7 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -24,45 +24,40 @@ #include <linux/slab.h> #include <plat/mcbsp.h> -#include <plat/omap_device.h> #include <linux/pm_runtime.h> -/* XXX These "sideways" includes are a sign that something is wrong */ -#include "../mach-omap2/cm2xxx_3xxx.h" -#include "../mach-omap2/cm-regbits-34xx.h" - struct omap_mcbsp **mcbsp_ptr; -int omap_mcbsp_count, omap_mcbsp_cache_size; +int omap_mcbsp_count; + +#define omap_mcbsp_check_valid_id(id) (id < omap_mcbsp_count) +#define id_to_mcbsp_ptr(id) mcbsp_ptr[id]; static void omap_mcbsp_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val) { - if (cpu_class_is_omap1()) { - ((u16 *)mcbsp->reg_cache)[reg / sizeof(u16)] = (u16)val; - __raw_writew((u16)val, mcbsp->io_base + reg); - } else if (cpu_is_omap2420()) { - ((u16 *)mcbsp->reg_cache)[reg / sizeof(u32)] = (u16)val; - __raw_writew((u16)val, mcbsp->io_base + reg); + void __iomem *addr = mcbsp->io_base + reg * mcbsp->pdata->reg_step; + + if (mcbsp->pdata->reg_size == 2) { + ((u16 *)mcbsp->reg_cache)[reg] = (u16)val; + __raw_writew((u16)val, addr); } else { - ((u32 *)mcbsp->reg_cache)[reg / sizeof(u32)] = val; - __raw_writel(val, mcbsp->io_base + reg); + ((u32 *)mcbsp->reg_cache)[reg] = val; + __raw_writel(val, addr); } } static int omap_mcbsp_read(struct omap_mcbsp *mcbsp, u16 reg, bool from_cache) { - if (cpu_class_is_omap1()) { - return !from_cache ? __raw_readw(mcbsp->io_base + reg) : - ((u16 *)mcbsp->reg_cache)[reg / sizeof(u16)]; - } else if (cpu_is_omap2420()) { - return !from_cache ? __raw_readw(mcbsp->io_base + reg) : - ((u16 *)mcbsp->reg_cache)[reg / sizeof(u32)]; + void __iomem *addr = mcbsp->io_base + reg * mcbsp->pdata->reg_step; + + if (mcbsp->pdata->reg_size == 2) { + return !from_cache ? __raw_readw(addr) : + ((u16 *)mcbsp->reg_cache)[reg]; } else { - return !from_cache ? __raw_readl(mcbsp->io_base + reg) : - ((u32 *)mcbsp->reg_cache)[reg / sizeof(u32)]; + return !from_cache ? __raw_readl(addr) : + ((u32 *)mcbsp->reg_cache)[reg]; } } -#ifdef CONFIG_ARCH_OMAP3 static void omap_mcbsp_st_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val) { __raw_writel(val, mcbsp->st_data->io_base_st + reg); @@ -72,7 +67,6 @@ static int omap_mcbsp_st_read(struct omap_mcbsp *mcbsp, u16 reg) { return __raw_readl(mcbsp->st_data->io_base_st + reg); } -#endif #define MCBSP_READ(mcbsp, reg) \ omap_mcbsp_read(mcbsp, OMAP_MCBSP_REG_##reg, 0) @@ -187,7 +181,7 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config) MCBSP_WRITE(mcbsp, MCR2, config->mcr2); MCBSP_WRITE(mcbsp, MCR1, config->mcr1); MCBSP_WRITE(mcbsp, PCR0, config->pcr0); - if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) { + if (mcbsp->pdata->has_ccr) { MCBSP_WRITE(mcbsp, XCCR, config->xccr); MCBSP_WRITE(mcbsp, RCCR, config->rccr); } @@ -239,46 +233,28 @@ int omap_mcbsp_dma_reg_params(unsigned int id, unsigned int stream) } mcbsp = id_to_mcbsp_ptr(id); - data_reg = mcbsp->phys_dma_base; - - if (mcbsp->mcbsp_config_type < MCBSP_CONFIG_TYPE2) { + if (mcbsp->pdata->reg_size == 2) { if (stream) - data_reg += OMAP_MCBSP_REG_DRR1; + data_reg = OMAP_MCBSP_REG_DRR1; else - data_reg += OMAP_MCBSP_REG_DXR1; + data_reg = OMAP_MCBSP_REG_DXR1; } else { if (stream) - data_reg += OMAP_MCBSP_REG_DRR; + data_reg = OMAP_MCBSP_REG_DRR; else - data_reg += OMAP_MCBSP_REG_DXR; + data_reg = OMAP_MCBSP_REG_DXR; } - return data_reg; + return mcbsp->phys_dma_base + data_reg * mcbsp->pdata->reg_step; } EXPORT_SYMBOL(omap_mcbsp_dma_reg_params); -#ifdef CONFIG_ARCH_OMAP3 -static struct omap_device *find_omap_device_by_dev(struct device *dev) -{ - struct platform_device *pdev = container_of(dev, - struct platform_device, dev); - return container_of(pdev, struct omap_device, pdev); -} - static void omap_st_on(struct omap_mcbsp *mcbsp) { unsigned int w; - struct omap_device *od; - od = find_omap_device_by_dev(mcbsp->dev); - - /* - * Sidetone uses McBSP ICLK - which must not idle when sidetones - * are enabled or sidetones start sounding ugly. - */ - w = omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE); - w &= ~(1 << (mcbsp->id - 2)); - omap2_cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE); + if (mcbsp->pdata->enable_st_clock) + mcbsp->pdata->enable_st_clock(mcbsp->id, 1); /* Enable McBSP Sidetone */ w = MCBSP_READ(mcbsp, SSELCR); @@ -292,9 +268,6 @@ static void omap_st_on(struct omap_mcbsp *mcbsp) static void omap_st_off(struct omap_mcbsp *mcbsp) { unsigned int w; - struct omap_device *od; - - od = find_omap_device_by_dev(mcbsp->dev); w = MCBSP_ST_READ(mcbsp, SSELCR); MCBSP_ST_WRITE(mcbsp, SSELCR, w & ~(ST_SIDETONEEN)); @@ -302,17 +275,13 @@ static void omap_st_off(struct omap_mcbsp *mcbsp) w = MCBSP_READ(mcbsp, SSELCR); MCBSP_WRITE(mcbsp, SSELCR, w & ~(SIDETONEEN)); - w = omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE); - w |= 1 << (mcbsp->id - 2); - omap2_cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE); + if (mcbsp->pdata->enable_st_clock) + mcbsp->pdata->enable_st_clock(mcbsp->id, 0); } static void omap_st_fir_write(struct omap_mcbsp *mcbsp, s16 *fir) { u16 val, i; - struct omap_device *od; - - od = find_omap_device_by_dev(mcbsp->dev); val = MCBSP_ST_READ(mcbsp, SSELCR); @@ -340,9 +309,6 @@ static void omap_st_chgain(struct omap_mcbsp *mcbsp) { u16 w; struct omap_mcbsp_st_data *st_data = mcbsp->st_data; - struct omap_device *od; - - od = find_omap_device_by_dev(mcbsp->dev); w = MCBSP_ST_READ(mcbsp, SSELCR); @@ -525,14 +491,13 @@ void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold) { struct omap_mcbsp *mcbsp; - if (!cpu_is_omap34xx() && !cpu_is_omap44xx()) - return; - if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return; } mcbsp = id_to_mcbsp_ptr(id); + if (mcbsp->pdata->buffer_size == 0) + return; if (threshold && threshold <= mcbsp->max_tx_thres) MCBSP_WRITE(mcbsp, THRSH2, threshold - 1); @@ -548,14 +513,13 @@ void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold) { struct omap_mcbsp *mcbsp; - if (!cpu_is_omap34xx() && !cpu_is_omap44xx()) - return; - if (!omap_mcbsp_check_valid_id(id)) { printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); return; } mcbsp = id_to_mcbsp_ptr(id); + if (mcbsp->pdata->buffer_size == 0) + return; if (threshold && threshold <= mcbsp->max_rx_thres) MCBSP_WRITE(mcbsp, THRSH1, threshold - 1); @@ -625,6 +589,8 @@ u16 omap_mcbsp_get_tx_delay(unsigned int id) return -ENODEV; } mcbsp = id_to_mcbsp_ptr(id); + if (mcbsp->pdata->buffer_size == 0) + return 0; /* Returns the number of free locations in the buffer */ buffstat = MCBSP_READ(mcbsp, XBUFFSTAT); @@ -648,6 +614,8 @@ u16 omap_mcbsp_get_rx_delay(unsigned int id) return -ENODEV; } mcbsp = id_to_mcbsp_ptr(id); + if (mcbsp->pdata->buffer_size == 0) + return 0; /* Returns the number of used locations in the buffer */ buffstat = MCBSP_READ(mcbsp, RBUFFSTAT); @@ -683,46 +651,6 @@ int omap_mcbsp_get_dma_op_mode(unsigned int id) } EXPORT_SYMBOL(omap_mcbsp_get_dma_op_mode); -static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) -{ - struct omap_device *od; - - od = find_omap_device_by_dev(mcbsp->dev); - /* - * Enable wakup behavior, smart idle and all wakeups - * REVISIT: some wakeups may be unnecessary - */ - if (cpu_is_omap34xx() || cpu_is_omap44xx()) { - MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN); - } -} - -static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp) -{ - struct omap_device *od; - - od = find_omap_device_by_dev(mcbsp->dev); - - /* - * Disable wakup behavior, smart idle and all wakeups - */ - if (cpu_is_omap34xx() || cpu_is_omap44xx()) { - /* - * HW bug workaround - If no_idle mode is taken, we need to - * go to smart_idle before going to always_idle, or the - * device will not hit retention anymore. - */ - - MCBSP_WRITE(mcbsp, WAKEUPEN, 0); - } -} -#else -static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) {} -static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp) {} -static inline void omap_st_start(struct omap_mcbsp *mcbsp) {} -static inline void omap_st_stop(struct omap_mcbsp *mcbsp) {} -#endif - int omap_mcbsp_request(unsigned int id) { struct omap_mcbsp *mcbsp; @@ -735,7 +663,7 @@ int omap_mcbsp_request(unsigned int id) } mcbsp = id_to_mcbsp_ptr(id); - reg_cache = kzalloc(omap_mcbsp_cache_size, GFP_KERNEL); + reg_cache = kzalloc(mcbsp->reg_cache_size, GFP_KERNEL); if (!reg_cache) { return -ENOMEM; } @@ -757,8 +685,9 @@ int omap_mcbsp_request(unsigned int id) pm_runtime_get_sync(mcbsp->dev); - /* Do procedure specific to omap34xx arch, if applicable */ - omap34xx_mcbsp_request(mcbsp); + /* Enable wakeup behavior */ + if (mcbsp->pdata->has_wakeup) + MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN); /* * Make sure that transmitter, receiver and sample-rate generator are @@ -795,8 +724,9 @@ err_clk_disable: if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free) mcbsp->pdata->ops->free(id); - /* Do procedure specific to omap34xx arch, if applicable */ - omap34xx_mcbsp_free(mcbsp); + /* Disable wakeup behavior */ + if (mcbsp->pdata->has_wakeup) + MCBSP_WRITE(mcbsp, WAKEUPEN, 0); pm_runtime_put_sync(mcbsp->dev); @@ -825,8 +755,9 @@ void omap_mcbsp_free(unsigned int id) if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free) mcbsp->pdata->ops->free(id); - /* Do procedure specific to omap34xx arch, if applicable */ - omap34xx_mcbsp_free(mcbsp); + /* Disable wakeup behavior */ + if (mcbsp->pdata->has_wakeup) + MCBSP_WRITE(mcbsp, WAKEUPEN, 0); pm_runtime_put_sync(mcbsp->dev); @@ -866,7 +797,7 @@ void omap_mcbsp_start(unsigned int id, int tx, int rx) } mcbsp = id_to_mcbsp_ptr(id); - if (cpu_is_omap34xx()) + if (mcbsp->st_data) omap_st_start(mcbsp); /* Only enable SRG, if McBSP is master */ @@ -904,7 +835,7 @@ void omap_mcbsp_start(unsigned int id, int tx, int rx) MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 7)); } - if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) { + if (mcbsp->pdata->has_ccr) { /* Release the transmitter and receiver */ w = MCBSP_READ_CACHE(mcbsp, XCCR); w &= ~(tx ? XDISABLE : 0); @@ -934,7 +865,7 @@ void omap_mcbsp_stop(unsigned int id, int tx, int rx) /* Reset transmitter */ tx &= 1; - if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) { + if (mcbsp->pdata->has_ccr) { w = MCBSP_READ_CACHE(mcbsp, XCCR); w |= (tx ? XDISABLE : 0); MCBSP_WRITE(mcbsp, XCCR, w); @@ -944,7 +875,7 @@ void omap_mcbsp_stop(unsigned int id, int tx, int rx) /* Reset receiver */ rx &= 1; - if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) { + if (mcbsp->pdata->has_ccr) { w = MCBSP_READ_CACHE(mcbsp, RCCR); w |= (rx ? RDISABLE : 0); MCBSP_WRITE(mcbsp, RCCR, w); @@ -961,39 +892,72 @@ void omap_mcbsp_stop(unsigned int id, int tx, int rx) MCBSP_WRITE(mcbsp, SPCR2, w & ~(1 << 6)); } - if (cpu_is_omap34xx()) + if (mcbsp->st_data) omap_st_stop(mcbsp); } EXPORT_SYMBOL(omap_mcbsp_stop); -/* - * The following functions are only required on an OMAP1-only build. - * mach-omap2/mcbsp.c contains the real functions - */ -#ifndef CONFIG_ARCH_OMAP2PLUS int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id) { - WARN(1, "%s: should never be called on an OMAP1-only kernel\n", - __func__); - return -EINVAL; + struct omap_mcbsp *mcbsp; + const char *src; + + if (!omap_mcbsp_check_valid_id(id)) { + pr_err("%s: Invalid id (%d)\n", __func__, id + 1); + return -EINVAL; + } + mcbsp = id_to_mcbsp_ptr(id); + + if (fck_src_id == MCBSP_CLKS_PAD_SRC) + src = "clks_ext"; + else if (fck_src_id == MCBSP_CLKS_PRCM_SRC) + src = "clks_fclk"; + else + return -EINVAL; + + if (mcbsp->pdata->set_clk_src) + return mcbsp->pdata->set_clk_src(mcbsp->dev, mcbsp->fclk, src); + else + return -EINVAL; } +EXPORT_SYMBOL(omap2_mcbsp_set_clks_src); void omap2_mcbsp1_mux_clkr_src(u8 mux) { - WARN(1, "%s: should never be called on an OMAP1-only kernel\n", - __func__); - return; + struct omap_mcbsp *mcbsp; + const char *src; + + if (mux == CLKR_SRC_CLKR) + src = "clkr"; + else if (mux == CLKR_SRC_CLKX) + src = "clkx"; + else + return; + + mcbsp = id_to_mcbsp_ptr(0); + if (mcbsp->pdata->mux_signal) + mcbsp->pdata->mux_signal(mcbsp->dev, "clkr", src); } +EXPORT_SYMBOL(omap2_mcbsp1_mux_clkr_src); void omap2_mcbsp1_mux_fsr_src(u8 mux) { - WARN(1, "%s: should never be called on an OMAP1-only kernel\n", - __func__); - return; + struct omap_mcbsp *mcbsp; + const char *src; + + if (mux == FSR_SRC_FSR) + src = "fsr"; + else if (mux == FSR_SRC_FSX) + src = "fsx"; + else + return; + + mcbsp = id_to_mcbsp_ptr(0); + if (mcbsp->pdata->mux_signal) + mcbsp->pdata->mux_signal(mcbsp->dev, "fsr", src); } -#endif +EXPORT_SYMBOL(omap2_mcbsp1_mux_fsr_src); -#ifdef CONFIG_ARCH_OMAP3 #define max_thres(m) (mcbsp->pdata->buffer_size) #define valid_threshold(m, val) ((val) <= max_thres(m)) #define THRESHOLD_PROP_BUILDER(prop) \ @@ -1084,6 +1048,17 @@ unlock: static DEVICE_ATTR(dma_op_mode, 0644, dma_op_mode_show, dma_op_mode_store); +static const struct attribute *additional_attrs[] = { + &dev_attr_max_tx_thres.attr, + &dev_attr_max_rx_thres.attr, + &dev_attr_dma_op_mode.attr, + NULL, +}; + +static const struct attribute_group additional_attr_group = { + .attrs = (struct attribute **)additional_attrs, +}; + static ssize_t st_taps_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -1142,27 +1117,6 @@ out: static DEVICE_ATTR(st_taps, 0644, st_taps_show, st_taps_store); -static const struct attribute *additional_attrs[] = { - &dev_attr_max_tx_thres.attr, - &dev_attr_max_rx_thres.attr, - &dev_attr_dma_op_mode.attr, - NULL, -}; - -static const struct attribute_group additional_attr_group = { - .attrs = (struct attribute **)additional_attrs, -}; - -static inline int __devinit omap_additional_add(struct device *dev) -{ - return sysfs_create_group(&dev->kobj, &additional_attr_group); -} - -static inline void __devexit omap_additional_remove(struct device *dev) -{ - sysfs_remove_group(&dev->kobj, &additional_attr_group); -} - static const struct attribute *sidetone_attrs[] = { &dev_attr_st_taps.attr, NULL, @@ -1172,10 +1126,9 @@ static const struct attribute_group sidetone_attr_group = { .attrs = (struct attribute **)sidetone_attrs, }; -static int __devinit omap_st_add(struct omap_mcbsp *mcbsp) +static int __devinit omap_st_add(struct omap_mcbsp *mcbsp, + struct resource *res) { - struct platform_device *pdev; - struct resource *res; struct omap_mcbsp_st_data *st_data; int err; @@ -1185,9 +1138,6 @@ static int __devinit omap_st_add(struct omap_mcbsp *mcbsp) goto err1; } - pdev = container_of(mcbsp->dev, struct platform_device, dev); - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sidetone"); st_data->io_base_st = ioremap(res->start, resource_size(res)); if (!st_data->io_base_st) { err = -ENOMEM; @@ -1214,59 +1164,10 @@ static void __devexit omap_st_remove(struct omap_mcbsp *mcbsp) { struct omap_mcbsp_st_data *st_data = mcbsp->st_data; - if (st_data) { - sysfs_remove_group(&mcbsp->dev->kobj, &sidetone_attr_group); - iounmap(st_data->io_base_st); - kfree(st_data); - } -} - -static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) -{ - mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT; - if (cpu_is_omap34xx()) { - /* - * Initially configure the maximum thresholds to a safe value. - * The McBSP FIFO usage with these values should not go under - * 16 locations. - * If the whole FIFO without safety buffer is used, than there - * is a possibility that the DMA will be not able to push the - * new data on time, causing channel shifts in runtime. - */ - mcbsp->max_tx_thres = max_thres(mcbsp) - 0x10; - mcbsp->max_rx_thres = max_thres(mcbsp) - 0x10; - /* - * REVISIT: Set dmap_op_mode to THRESHOLD as default - * for mcbsp2 instances. - */ - if (omap_additional_add(mcbsp->dev)) - dev_warn(mcbsp->dev, - "Unable to create additional controls\n"); - - if (mcbsp->id == 2 || mcbsp->id == 3) - if (omap_st_add(mcbsp)) - dev_warn(mcbsp->dev, - "Unable to create sidetone controls\n"); - - } else { - mcbsp->max_tx_thres = -EINVAL; - mcbsp->max_rx_thres = -EINVAL; - } -} - -static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp) -{ - if (cpu_is_omap34xx()) { - omap_additional_remove(mcbsp->dev); - - if (mcbsp->id == 2 || mcbsp->id == 3) - omap_st_remove(mcbsp); - } + sysfs_remove_group(&mcbsp->dev->kobj, &sidetone_attr_group); + iounmap(st_data->io_base_st); + kfree(st_data); } -#else -static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) {} -static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp) {} -#endif /* CONFIG_ARCH_OMAP3 */ /* * McBSP1 and McBSP3 are directly mapped on 1610 and 1510. @@ -1316,7 +1217,7 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev) } } mcbsp->phys_base = res->start; - omap_mcbsp_cache_size = resource_size(res); + mcbsp->reg_cache_size = resource_size(res); mcbsp->io_base = ioremap(res->start, resource_size(res)); if (!mcbsp->io_base) { ret = -ENOMEM; @@ -1364,15 +1265,52 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev) mcbsp->pdata = pdata; mcbsp->dev = &pdev->dev; mcbsp_ptr[id] = mcbsp; - mcbsp->mcbsp_config_type = pdata->mcbsp_config_type; platform_set_drvdata(pdev, mcbsp); pm_runtime_enable(mcbsp->dev); - /* Initialize mcbsp properties for OMAP34XX if needed / applicable */ - omap34xx_device_init(mcbsp); + mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT; + if (mcbsp->pdata->buffer_size) { + /* + * Initially configure the maximum thresholds to a safe value. + * The McBSP FIFO usage with these values should not go under + * 16 locations. + * If the whole FIFO without safety buffer is used, than there + * is a possibility that the DMA will be not able to push the + * new data on time, causing channel shifts in runtime. + */ + mcbsp->max_tx_thres = max_thres(mcbsp) - 0x10; + mcbsp->max_rx_thres = max_thres(mcbsp) - 0x10; + + ret = sysfs_create_group(&mcbsp->dev->kobj, + &additional_attr_group); + if (ret) { + dev_err(mcbsp->dev, + "Unable to create additional controls\n"); + goto err_thres; + } + } else { + mcbsp->max_tx_thres = -EINVAL; + mcbsp->max_rx_thres = -EINVAL; + } + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sidetone"); + if (res) { + ret = omap_st_add(mcbsp, res); + if (ret) { + dev_err(mcbsp->dev, + "Unable to create sidetone controls\n"); + goto err_st; + } + } return 0; +err_st: + if (mcbsp->pdata->buffer_size) + sysfs_remove_group(&mcbsp->dev->kobj, + &additional_attr_group); +err_thres: + clk_put(mcbsp->fclk); err_res: iounmap(mcbsp->io_base); err_ioremap: @@ -1392,7 +1330,12 @@ static int __devexit omap_mcbsp_remove(struct platform_device *pdev) mcbsp->pdata->ops->free) mcbsp->pdata->ops->free(mcbsp->id); - omap34xx_device_exit(mcbsp); + if (mcbsp->pdata->buffer_size) + sysfs_remove_group(&mcbsp->dev->kobj, + &additional_attr_group); + + if (mcbsp->st_data) + omap_st_remove(mcbsp); clk_put(mcbsp->fclk); diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index 9a6a53854911..26aee5cc1fc1 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -94,6 +94,9 @@ #define USE_WAKEUP_LAT 0 #define IGNORE_WAKEUP_LAT 1 +static int omap_device_register(struct platform_device *pdev); +static int omap_early_device_register(struct platform_device *pdev); + /* Private functions */ /** @@ -114,7 +117,7 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat) { struct timespec a, b, c; - pr_debug("omap_device: %s: activating\n", od->pdev.name); + dev_dbg(&od->pdev->dev, "omap_device: activating\n"); while (od->pm_lat_level > 0) { struct omap_device_pm_latency *odpl; @@ -138,25 +141,24 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat) c = timespec_sub(b, a); act_lat = timespec_to_ns(&c); - pr_debug("omap_device: %s: pm_lat %d: activate: elapsed time " - "%llu nsec\n", od->pdev.name, od->pm_lat_level, - act_lat); + dev_dbg(&od->pdev->dev, + "omap_device: pm_lat %d: activate: elapsed time " + "%llu nsec\n", od->pm_lat_level, act_lat); if (act_lat > odpl->activate_lat) { odpl->activate_lat_worst = act_lat; if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) { odpl->activate_lat = act_lat; - pr_warning("omap_device: %s.%d: new worst case " - "activate latency %d: %llu\n", - od->pdev.name, od->pdev.id, - od->pm_lat_level, act_lat); + dev_dbg(&od->pdev->dev, + "new worst case activate latency " + "%d: %llu\n", + od->pm_lat_level, act_lat); } else - pr_warning("omap_device: %s.%d: activate " - "latency %d higher than exptected. " - "(%llu > %d)\n", - od->pdev.name, od->pdev.id, - od->pm_lat_level, act_lat, - odpl->activate_lat); + dev_warn(&od->pdev->dev, + "activate latency %d " + "higher than exptected. (%llu > %d)\n", + od->pm_lat_level, act_lat, + odpl->activate_lat); } od->dev_wakeup_lat -= odpl->activate_lat; @@ -183,7 +185,7 @@ static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat) { struct timespec a, b, c; - pr_debug("omap_device: %s: deactivating\n", od->pdev.name); + dev_dbg(&od->pdev->dev, "omap_device: deactivating\n"); while (od->pm_lat_level < od->pm_lats_cnt) { struct omap_device_pm_latency *odpl; @@ -206,28 +208,26 @@ static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat) c = timespec_sub(b, a); deact_lat = timespec_to_ns(&c); - pr_debug("omap_device: %s: pm_lat %d: deactivate: elapsed time " - "%llu nsec\n", od->pdev.name, od->pm_lat_level, - deact_lat); + dev_dbg(&od->pdev->dev, + "omap_device: pm_lat %d: deactivate: elapsed time " + "%llu nsec\n", od->pm_lat_level, deact_lat); if (deact_lat > odpl->deactivate_lat) { odpl->deactivate_lat_worst = deact_lat; if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) { odpl->deactivate_lat = deact_lat; - pr_warning("omap_device: %s.%d: new worst case " - "deactivate latency %d: %llu\n", - od->pdev.name, od->pdev.id, - od->pm_lat_level, deact_lat); + dev_dbg(&od->pdev->dev, + "new worst case deactivate latency " + "%d: %llu\n", + od->pm_lat_level, deact_lat); } else - pr_warning("omap_device: %s.%d: deactivate " - "latency %d higher than exptected. " - "(%llu > %d)\n", - od->pdev.name, od->pdev.id, - od->pm_lat_level, deact_lat, - odpl->deactivate_lat); + dev_warn(&od->pdev->dev, + "deactivate latency %d " + "higher than exptected. (%llu > %d)\n", + od->pm_lat_level, deact_lat, + odpl->deactivate_lat); } - od->dev_wakeup_lat += odpl->activate_lat; od->pm_lat_level++; @@ -245,28 +245,27 @@ static void _add_clkdev(struct omap_device *od, const char *clk_alias, if (!clk_alias || !clk_name) return; - pr_debug("omap_device: %s: Creating %s -> %s\n", - dev_name(&od->pdev.dev), clk_alias, clk_name); + dev_dbg(&od->pdev->dev, "Creating %s -> %s\n", clk_alias, clk_name); - r = clk_get_sys(dev_name(&od->pdev.dev), clk_alias); + r = clk_get_sys(dev_name(&od->pdev->dev), clk_alias); if (!IS_ERR(r)) { - pr_warning("omap_device: %s: alias %s already exists\n", - dev_name(&od->pdev.dev), clk_alias); + dev_warn(&od->pdev->dev, + "alias %s already exists\n", clk_alias); clk_put(r); return; } r = omap_clk_get_by_name(clk_name); if (IS_ERR(r)) { - pr_err("omap_device: %s: omap_clk_get_by_name for %s failed\n", - dev_name(&od->pdev.dev), clk_name); + dev_err(&od->pdev->dev, + "omap_clk_get_by_name for %s failed\n", clk_name); return; } - l = clkdev_alloc(r, clk_alias, dev_name(&od->pdev.dev)); + l = clkdev_alloc(r, clk_alias, dev_name(&od->pdev->dev)); if (!l) { - pr_err("omap_device: %s: clkdev_alloc for %s failed\n", - dev_name(&od->pdev.dev), clk_alias); + dev_err(&od->pdev->dev, + "clkdev_alloc for %s failed\n", clk_alias); return; } @@ -343,7 +342,7 @@ u32 omap_device_get_context_loss_count(struct platform_device *pdev) * much memory to allocate before calling * omap_device_fill_resources(). Returns the count. */ -int omap_device_count_resources(struct omap_device *od) +static int omap_device_count_resources(struct omap_device *od) { int c = 0; int i; @@ -352,7 +351,7 @@ int omap_device_count_resources(struct omap_device *od) c += omap_hwmod_count_resources(od->hwmods[i]); pr_debug("omap_device: %s: counted %d total resources across %d " - "hwmods\n", od->pdev.name, c, od->hwmods_cnt); + "hwmods\n", od->pdev->name, c, od->hwmods_cnt); return c; } @@ -374,7 +373,8 @@ int omap_device_count_resources(struct omap_device *od) * functions to get device resources. Hacking around the existing * platform_device code wastes memory. Returns 0. */ -int omap_device_fill_resources(struct omap_device *od, struct resource *res) +static int omap_device_fill_resources(struct omap_device *od, + struct resource *res) { int c = 0; int i, r; @@ -405,7 +405,7 @@ int omap_device_fill_resources(struct omap_device *od, struct resource *res) * information. Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise, * passes along the return value of omap_device_build_ss(). */ -struct omap_device *omap_device_build(const char *pdev_name, int pdev_id, +struct platform_device *omap_device_build(const char *pdev_name, int pdev_id, struct omap_hwmod *oh, void *pdata, int pdata_len, struct omap_device_pm_latency *pm_lats, @@ -438,15 +438,15 @@ struct omap_device *omap_device_build(const char *pdev_name, int pdev_id, * platform_device record. Returns an ERR_PTR() on error, or passes * along the return value of omap_device_register(). */ -struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id, +struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id, struct omap_hwmod **ohs, int oh_cnt, void *pdata, int pdata_len, struct omap_device_pm_latency *pm_lats, int pm_lats_cnt, int is_early_device) { int ret = -ENOMEM; + struct platform_device *pdev; struct omap_device *od; - char *pdev_name2; struct resource *res = NULL; int i, res_count; struct omap_hwmod **hwmods; @@ -457,72 +457,76 @@ struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id, if (!pdata && pdata_len > 0) return ERR_PTR(-EINVAL); + pdev = platform_device_alloc(pdev_name, pdev_id); + if (!pdev) { + ret = -ENOMEM; + goto odbs_exit; + } + pr_debug("omap_device: %s: building with %d hwmods\n", pdev_name, oh_cnt); od = kzalloc(sizeof(struct omap_device), GFP_KERNEL); - if (!od) - return ERR_PTR(-ENOMEM); - + if (!od) { + ret = -ENOMEM; + goto odbs_exit1; + } od->hwmods_cnt = oh_cnt; hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL); if (!hwmods) - goto odbs_exit1; + goto odbs_exit2; memcpy(hwmods, ohs, sizeof(struct omap_hwmod *) * oh_cnt); od->hwmods = hwmods; - - pdev_name2 = kzalloc(strlen(pdev_name) + 1, GFP_KERNEL); - if (!pdev_name2) - goto odbs_exit2; - strcpy(pdev_name2, pdev_name); - - od->pdev.name = pdev_name2; - od->pdev.id = pdev_id; + od->pdev = pdev; res_count = omap_device_count_resources(od); if (res_count > 0) { res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL); if (!res) goto odbs_exit3; - } - omap_device_fill_resources(od, res); - od->pdev.num_resources = res_count; - od->pdev.resource = res; + omap_device_fill_resources(od, res); + + ret = platform_device_add_resources(pdev, res, res_count); + kfree(res); - ret = platform_device_add_data(&od->pdev, pdata, pdata_len); + if (ret) + goto odbs_exit3; + } + + ret = platform_device_add_data(pdev, pdata, pdata_len); if (ret) - goto odbs_exit4; + goto odbs_exit3; - od->pm_lats = pm_lats; - od->pm_lats_cnt = pm_lats_cnt; + pdev->archdata.od = od; if (is_early_device) - ret = omap_early_device_register(od); + ret = omap_early_device_register(pdev); else - ret = omap_device_register(od); + ret = omap_device_register(pdev); + if (ret) + goto odbs_exit3; + + od->pm_lats = pm_lats; + od->pm_lats_cnt = pm_lats_cnt; for (i = 0; i < oh_cnt; i++) { hwmods[i]->od = od; _add_hwmod_clocks_clkdev(od, hwmods[i]); } - if (ret) - goto odbs_exit4; - - return od; + return pdev; -odbs_exit4: - kfree(res); odbs_exit3: - kfree(pdev_name2); -odbs_exit2: kfree(hwmods); -odbs_exit1: +odbs_exit2: kfree(od); +odbs_exit1: + platform_device_put(pdev); +odbs_exit: pr_err("omap_device: %s: build failed (%d)\n", pdev_name, ret); @@ -538,11 +542,11 @@ odbs_exit1: * platform_early_add_device() on the underlying platform_device. * Returns 0 by default. */ -int omap_early_device_register(struct omap_device *od) +static int omap_early_device_register(struct platform_device *pdev) { struct platform_device *devices[1]; - devices[0] = &(od->pdev); + devices[0] = pdev; early_platform_add_devices(devices, 1); return 0; } @@ -615,6 +619,9 @@ static int _od_resume_noirq(struct device *dev) return pm_generic_resume_noirq(dev); } +#else +#define _od_suspend_noirq NULL +#define _od_resume_noirq NULL #endif static struct dev_pm_domain omap_device_pm_domain = { @@ -635,13 +642,13 @@ static struct dev_pm_domain omap_device_pm_domain = { * platform_device_register() on the underlying platform_device. * Returns the return value of platform_device_register(). */ -int omap_device_register(struct omap_device *od) +static int omap_device_register(struct platform_device *pdev) { - pr_debug("omap_device: %s: registering\n", od->pdev.name); + pr_debug("omap_device: %s: registering\n", pdev->name); - od->pdev.dev.parent = &omap_device_parent; - od->pdev.dev.pm_domain = &omap_device_pm_domain; - return platform_device_register(&od->pdev); + pdev->dev.parent = &omap_device_parent; + pdev->dev.pm_domain = &omap_device_pm_domain; + return platform_device_add(pdev); } @@ -668,8 +675,9 @@ int omap_device_enable(struct platform_device *pdev) od = to_omap_device(pdev); if (od->_state == OMAP_DEVICE_STATE_ENABLED) { - WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n", - od->pdev.name, od->pdev.id, __func__, od->_state); + dev_warn(&pdev->dev, + "omap_device: %s() called from invalid state %d\n", + __func__, od->_state); return -EINVAL; } @@ -707,8 +715,9 @@ int omap_device_idle(struct platform_device *pdev) od = to_omap_device(pdev); if (od->_state != OMAP_DEVICE_STATE_ENABLED) { - WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n", - od->pdev.name, od->pdev.id, __func__, od->_state); + dev_warn(&pdev->dev, + "omap_device: %s() called from invalid state %d\n", + __func__, od->_state); return -EINVAL; } @@ -739,8 +748,9 @@ int omap_device_shutdown(struct platform_device *pdev) if (od->_state != OMAP_DEVICE_STATE_ENABLED && od->_state != OMAP_DEVICE_STATE_IDLE) { - WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n", - od->pdev.name, od->pdev.id, __func__, od->_state); + dev_warn(&pdev->dev, + "omap_device: %s() called from invalid state %d\n", + __func__, od->_state); return -EINVAL; } diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c index 02af235298e2..5f84a3f13ef9 100644 --- a/arch/arm/plat-s5p/clock.c +++ b/arch/arm/plat-s5p/clock.c @@ -192,7 +192,7 @@ unsigned long s5p_spdif_get_rate(struct clk *clk) if (IS_ERR(pclk)) return -EINVAL; - rate = pclk->ops->get_rate(clk); + rate = pclk->ops->get_rate(pclk); clk_put(pclk); return rate; diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c index 327ab9f662e8..f88216d23991 100644 --- a/arch/arm/plat-s5p/irq-gpioint.c +++ b/arch/arm/plat-s5p/irq-gpioint.c @@ -23,6 +23,8 @@ #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> +#include <asm/mach/irq.h> + #define GPIO_BASE(chip) (((unsigned long)(chip)->base) & 0xFFFFF000u) #define CON_OFFSET 0x700 @@ -81,6 +83,9 @@ static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc) int group, pend_offset, mask_offset; unsigned int pend, mask; + struct irq_chip *chip = irq_get_chip(irq); + chained_irq_enter(chip, desc); + for (group = 0; group < bank->nr_groups; group++) { struct s3c_gpio_chip *chip = bank->chips[group]; if (!chip) @@ -102,23 +107,25 @@ static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc) pend &= ~BIT(offset); } } + chained_irq_exit(chip, desc); } static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) { static int used_gpioint_groups = 0; int group = chip->group; - struct s5p_gpioint_bank *bank = NULL; + struct s5p_gpioint_bank *b, *bank = NULL; struct irq_chip_generic *gc; struct irq_chip_type *ct; if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT) return -ENOMEM; - list_for_each_entry(bank, &banks, list) { - if (group >= bank->start && - group < bank->start + bank->nr_groups) + list_for_each_entry(b, &banks, list) { + if (group >= b->start && group < b->start + b->nr_groups) { + bank = b; break; + } } if (!bank) return -EINVAL; diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c index 302c42670bd1..3b4451979d1b 100644 --- a/arch/arm/plat-samsung/clock.c +++ b/arch/arm/plat-samsung/clock.c @@ -64,6 +64,17 @@ static LIST_HEAD(clocks); */ DEFINE_SPINLOCK(clocks_lock); +/* Global watchdog clock used by arch_wtd_reset() callback */ +struct clk *s3c2410_wdtclk; +static int __init s3c_wdt_reset_init(void) +{ + s3c2410_wdtclk = clk_get(NULL, "watchdog"); + if (IS_ERR(s3c2410_wdtclk)) + printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__); + return 0; +} +arch_initcall(s3c_wdt_reset_init); + /* enable and disable calls for use with the clk struct */ static int clk_null_enable(struct clk *clk, int enable) diff --git a/arch/arm/plat-samsung/include/plat/backlight.h b/arch/arm/plat-samsung/include/plat/backlight.h index 51d8da846a62..ad530c78fe8c 100644 --- a/arch/arm/plat-samsung/include/plat/backlight.h +++ b/arch/arm/plat-samsung/include/plat/backlight.h @@ -20,7 +20,7 @@ struct samsung_bl_gpio_info { int func; }; -extern void samsung_bl_set(struct samsung_bl_gpio_info *gpio_info, +extern void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info, struct platform_pwm_backlight_data *bl_data); #endif /* __ASM_PLAT_BACKLIGHT_H */ diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h index 87d5b38a86fb..73c66d4d10fa 100644 --- a/arch/arm/plat-samsung/include/plat/clock.h +++ b/arch/arm/plat-samsung/include/plat/clock.h @@ -9,6 +9,9 @@ * published by the Free Software Foundation. */ +#ifndef __ASM_PLAT_CLOCK_H +#define __ASM_PLAT_CLOCK_H __FILE__ + #include <linux/spinlock.h> #include <linux/clkdev.h> @@ -121,3 +124,8 @@ extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable); extern void s3c_pwmclk_init(void); +/* Global watchdog clock used by arch_wtd_reset() callback */ + +extern struct clk *s3c2410_wdtclk; + +#endif /* __ASM_PLAT_CLOCK_H */ diff --git a/arch/arm/plat-samsung/include/plat/watchdog-reset.h b/arch/arm/plat-samsung/include/plat/watchdog-reset.h index 54b762acb5a0..40dbb2b0ae22 100644 --- a/arch/arm/plat-samsung/include/plat/watchdog-reset.h +++ b/arch/arm/plat-samsung/include/plat/watchdog-reset.h @@ -10,6 +10,7 @@ * published by the Free Software Foundation. */ +#include <plat/clock.h> #include <plat/regs-watchdog.h> #include <mach/map.h> @@ -19,17 +20,12 @@ static inline void arch_wdt_reset(void) { - struct clk *wdtclk; - printk("arch_reset: attempting watchdog reset\n"); __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */ - wdtclk = clk_get(NULL, "watchdog"); - if (!IS_ERR(wdtclk)) { - clk_enable(wdtclk); - } else - printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__); + if (s3c2410_wdtclk) + clk_enable(s3c2410_wdtclk); /* put initial values into count and data */ __raw_writel(0x80, S3C2410_WTCNT); diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c index f714d060370d..51583cd30164 100644 --- a/arch/arm/plat-samsung/irq-vic-timer.c +++ b/arch/arm/plat-samsung/irq-vic-timer.c @@ -22,9 +22,14 @@ #include <plat/irq-vic-timer.h> #include <plat/regs-timer.h> +#include <asm/mach/irq.h> + static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc) { + struct irq_chip *chip = irq_get_chip(irq); + chained_irq_enter(chip, desc); generic_handle_irq((int)desc->irq_data.handler_data); + chained_irq_exit(chip, desc); } /* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */ diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index fff68d0d521b..62cc8f981171 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -351,7 +351,7 @@ centro MACH_CENTRO CENTRO 1944 nokia_rx51 MACH_NOKIA_RX51 NOKIA_RX51 1955 omap_zoom2 MACH_OMAP_ZOOM2 OMAP_ZOOM2 1967 cpuat9260 MACH_CPUAT9260 CPUAT9260 1973 -eukrea_cpuimx27 MACH_CPUIMX27 CPUIMX27 1975 +eukrea_cpuimx27 MACH_EUKREA_CPUIMX27 EUKREA_CPUIMX27 1975 acs5k MACH_ACS5K ACS5K 1982 snapper_9260 MACH_SNAPPER_9260 SNAPPER_9260 1987 dsm320 MACH_DSM320 DSM320 1988 @@ -476,8 +476,8 @@ cns3420vb MACH_CNS3420VB CNS3420VB 2776 omap4_panda MACH_OMAP4_PANDA OMAP4_PANDA 2791 ti8168evm MACH_TI8168EVM TI8168EVM 2800 teton_bga MACH_TETON_BGA TETON_BGA 2816 -eukrea_cpuimx25sd MACH_EUKREA_CPUIMX25 EUKREA_CPUIMX25 2820 -eukrea_cpuimx35sd MACH_EUKREA_CPUIMX35 EUKREA_CPUIMX35 2821 +eukrea_cpuimx25sd MACH_EUKREA_CPUIMX25SD EUKREA_CPUIMX25SD 2820 +eukrea_cpuimx35sd MACH_EUKREA_CPUIMX35SD EUKREA_CPUIMX35SD 2821 eukrea_cpuimx51sd MACH_EUKREA_CPUIMX51SD EUKREA_CPUIMX51SD 2822 eukrea_cpuimx51 MACH_EUKREA_CPUIMX51 EUKREA_CPUIMX51 2823 smdkc210 MACH_SMDKC210 SMDKC210 2838 |