diff options
Diffstat (limited to 'arch/arm')
131 files changed, 2367 insertions, 684 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c1f1a7eee953..f219c30eb4e1 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -6,12 +6,13 @@ config ARM select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST select ARCH_HAVE_CUSTOM_GPIO_H select ARCH_MIGHT_HAVE_PC_PARPORT + select ARCH_USE_BUILTIN_BSWAP select ARCH_USE_CMPXCHG_LOCKREF select ARCH_WANT_IPC_PARSE_VERSION select BUILDTIME_EXTABLE_SORT if MMU select CLONE_BACKWARDS select CPU_PM if (SUSPEND || CPU_IDLE) - select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN && MMU + select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI) select GENERIC_CLOCKEVENTS_BROADCAST if SMP select GENERIC_IDLE_POLL_SETUP @@ -35,6 +36,7 @@ config ARM select HAVE_DMA_ATTRS select HAVE_DMA_CONTIGUOUS if MMU select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) + select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL) select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL) select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) @@ -1651,9 +1653,6 @@ config HZ config SCHED_HRTICK def_bool HIGH_RES_TIMERS -config SCHED_HRTICK - def_bool HIGH_RES_TIMERS - config THUMB2_KERNEL bool "Compile the kernel in Thumb-2 mode" if !CPU_THUMBONLY depends on (CPU_V7 || CPU_V7M) && !CPU_V6 && !CPU_V6K @@ -1946,6 +1945,7 @@ config ZBOOT_ROM_BSS config ZBOOT_ROM bool "Compressed boot loader in ROM/flash" depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS + depends on !ARM_APPENDED_DTB && !XIP_KERNEL && !AUTO_ZRELADDR help Say Y here if you intend to execute your compressed kernel image (zImage) directly from ROM or flash. If unsure, say N. @@ -1981,7 +1981,7 @@ endchoice config ARM_APPENDED_DTB bool "Use appended device tree blob to zImage (EXPERIMENTAL)" - depends on OF && !ZBOOT_ROM + depends on OF help With this option, the boot code will look for a device tree binary (DTB) appended to zImage @@ -2069,7 +2069,7 @@ endchoice config XIP_KERNEL bool "Kernel Execute-In-Place from ROM" - depends on !ZBOOT_ROM && !ARM_LPAE && !ARCH_MULTIPLATFORM + depends on !ARM_LPAE && !ARCH_MULTIPLATFORM help Execute-In-Place allows the kernel to run from non-volatile storage directly addressable by the CPU, such as NOR flash. This saves RAM @@ -2132,7 +2132,6 @@ config CRASH_DUMP config AUTO_ZRELADDR bool "Auto calculation of the decompressed kernel image address" - depends on !ZBOOT_ROM help ZRELADDR is the physical address where the decompressed kernel image will be placed. If AUTO_ZRELADDR is selected, the address diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 5765abf5ce84..9afabbb5e798 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -2,6 +2,18 @@ menu "Kernel hacking" source "lib/Kconfig.debug" +config ARM_PTDUMP + bool "Export kernel pagetable layout to userspace via debugfs" + depends on DEBUG_KERNEL + select DEBUG_FS + ---help--- + Say Y here if you want to show the kernel pagetable layout in a + debugfs file. This information is only useful for kernel developers + who are working in architecture specific areas of the kernel. + It is probably not a good idea to enable this feature in a production + kernel. + If in doubt, say "N" + config STRICT_DEVMEM bool "Filter access to /dev/mem" depends on MMU @@ -94,6 +106,17 @@ choice depends on ARCH_BCM2835 select DEBUG_UART_PL01X + config DEBUG_BCM_KONA_UART + bool "Kernel low-level debugging messages via BCM KONA UART" + depends on ARCH_BCM + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Broadcom SoC platforms. + This low level debug works for Broadcom + mobile SoCs in the Kona family of chips (e.g. bcm28155, + bcm11351, etc...) + config DEBUG_CLPS711X_UART1 bool "Kernel low-level debugging messages via UART1" depends on ARCH_CLPS711X @@ -988,6 +1011,7 @@ config DEBUG_UART_PHYS default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 default 0x20201000 if DEBUG_BCM2835 + default 0x3e000000 if DEBUG_BCM_KONA_UART default 0x4000e400 if DEBUG_LL_UART_EFM32 default 0x40090000 if ARCH_LPC32XX default 0x40100000 if DEBUG_PXA_UART1 @@ -1049,6 +1073,7 @@ config DEBUG_UART_VIRT default 0xfe018000 if DEBUG_MMP_UART3 default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART default 0xfe230000 if DEBUG_PICOXCELL_UART + default 0xfe300000 if DEBUG_BCM_KONA_UART default 0xfe800000 if ARCH_IOP32X default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HI3716_UART default 0xfeb24000 if DEBUG_RK3X_UART0 @@ -1091,7 +1116,8 @@ config DEBUG_UART_8250_WORD default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART || \ ARCH_KEYSTONE || \ DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \ - DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_DAVINCI_TNETV107X_UART1 + DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_DAVINCI_TNETV107X_UART1 || \ + DEBUG_BCM_KONA_UART config DEBUG_UART_8250_FLOW_CONTROL bool "Enable flow control for 8250 UART" @@ -1150,4 +1176,15 @@ config PID_IN_CONTEXTIDR additional instructions during context switch. Say Y here only if you are planning to use hardware trace tools with this kernel. +config DEBUG_SET_MODULE_RONX + bool "Set loadable kernel module data as NX and text as RO" + depends on MODULES + ---help--- + This option helps catch unintended modifications to loadable + kernel module's text and read-only data. It also prevents execution + of module data. Such protection may interfere with run-time code + patching and dynamic kernel tracing - and they might also protect + against certain classes of kernel exploits. + If in doubt, say "N". + endmenu diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index e7190bb5998e..4bb86d9a749d 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -108,12 +108,12 @@ endif targets := vmlinux vmlinux.lds \ piggy.$(suffix_y) piggy.$(suffix_y).o \ - lib1funcs.o lib1funcs.S ashldi3.o ashldi3.S \ - font.o font.c head.o misc.o $(OBJS) + lib1funcs.o lib1funcs.S ashldi3.o ashldi3.S bswapsdi2.o \ + bswapsdi2.S font.o font.c head.o misc.o $(OBJS) # Make sure files are removed during clean extra-y += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern piggy.lz4 \ - lib1funcs.S ashldi3.S $(libfdt) $(libfdt_hdrs) \ + lib1funcs.S ashldi3.S bswapsdi2.S $(libfdt) $(libfdt_hdrs) \ hyp-stub.S ifeq ($(CONFIG_FUNCTION_TRACER),y) @@ -156,6 +156,12 @@ ashldi3 = $(obj)/ashldi3.o $(obj)/ashldi3.S: $(srctree)/arch/$(SRCARCH)/lib/ashldi3.S $(call cmd,shipped) +# For __bswapsi2, __bswapdi2 +bswapsdi2 = $(obj)/bswapsdi2.o + +$(obj)/bswapsdi2.S: $(srctree)/arch/$(SRCARCH)/lib/bswapsdi2.S + $(call cmd,shipped) + # We need to prevent any GOTOFF relocs being used with references # to symbols in the .bss section since we cannot relocate them # independently from the rest at run time. This can be achieved by @@ -177,7 +183,8 @@ if [ $(words $(ZRELADDR)) -gt 1 -a "$(CONFIG_AUTO_ZRELADDR)" = "" ]; then \ fi $(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \ - $(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) FORCE + $(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) \ + $(bswapsdi2) FORCE @$(check_for_multiple_zreladdr) $(call if_changed,ld) @$(check_for_bad_syms) diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts index b4f95c2bbf74..72a9b3fc4251 100644 --- a/arch/arm/boot/dts/am335x-base0033.dts +++ b/arch/arm/boot/dts/am335x-base0033.dts @@ -13,4 +13,83 @@ / { model = "IGEP COM AM335x on AQUILA Expansion"; compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx"; + + hdmi { + compatible = "ti,tilcdc,slave"; + i2c = <&i2c0>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_pins>; + pinctrl-1 = <&nxp_hdmi_off_pins>; + status = "okay"; + }; + + leds_base { + pinctrl-names = "default"; + pinctrl-0 = <&leds_base_pins>; + + compatible = "gpio-leds"; + + led@0 { + label = "base:red:user"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; /* gpio1_21 */ + default-state = "off"; + }; + + led@1 { + label = "base:green:user"; + gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; /* gpio2_0 */ + default-state = "off"; + }; + }; +}; + +&am33xx_pinmux { + nxp_hdmi_pins: pinmux_nxp_hdmi_pins { + pinctrl-single,pins = < + 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ + 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0 */ + 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1 */ + 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2 */ + 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3 */ + 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4 */ + 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5 */ + 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6 */ + 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7 */ + 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8 */ + 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9 */ + 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10 */ + 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11 */ + 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12 */ + 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13 */ + 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14 */ + 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15 */ + 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync */ + 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync */ + 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk */ + 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en */ + >; + }; + nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins { + pinctrl-single,pins = < + 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ + >; + }; + + leds_base_pins: pinmux_leds_base_pins { + pinctrl-single,pins = < + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + 0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.gpio2_0 */ + >; + }; +}; + +&lcdc { + status = "okay"; +}; + +&i2c0 { + eeprom: eeprom@50 { + compatible = "at,24c256"; + reg = <0x50>; + }; }; diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index 619624479311..7063311a58d9 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -199,6 +199,35 @@ pinctrl-0 = <&uart0_pins>; }; +&usb { + status = "okay"; + + control@44e10000 { + status = "okay"; + }; + + usb-phy@47401300 { + status = "okay"; + }; + + usb-phy@47401b00 { + status = "okay"; + }; + + usb@47401000 { + status = "okay"; + }; + + usb@47401800 { + status = "okay"; + dr_mode = "host"; + }; + + dma-controller@07402000 { + status = "okay"; + }; +}; + #include "tps65910.dtsi" &tps { diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index e99dfaf70052..03fcbf0a88a8 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -7,11 +7,11 @@ */ /dts-v1/; -#include "omap34xx.dtsi" +#include "am3517.dtsi" / { - model = "TI AM3517 EVM (AM3517/05)"; - compatible = "ti,am3517-evm", "ti,omap3"; + model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)"; + compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3"; memory { device_type = "memory"; diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi new file mode 100644 index 000000000000..2fbe02faa8b1 --- /dev/null +++ b/arch/arm/boot/dts/am3517.dtsi @@ -0,0 +1,63 @@ +/* + * Device Tree Source for am3517 SoC + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include "omap3.dtsi" + +/ { + aliases { + serial3 = &uart4; + }; + + ocp { + am35x_otg_hs: am35x_otg_hs@5c040000 { + compatible = "ti,omap3-musb"; + ti,hwmods = "am35x_otg_hs"; + status = "disabled"; + reg = <0x5c040000 0x1000>; + interrupts = <71>; + interrupt-names = "mc"; + }; + + davinci_emac: ethernet@0x5c000000 { + compatible = "ti,am3517-emac"; + ti,hwmods = "davinci_emac"; + status = "disabled"; + reg = <0x5c000000 0x30000>; + interrupts = <67 68 69 70>; + ti,davinci-ctrl-reg-offset = <0x10000>; + ti,davinci-ctrl-mod-reg-offset = <0>; + ti,davinci-ctrl-ram-offset = <0x20000>; + ti,davinci-ctrl-ram-size = <0x2000>; + ti,davinci-rmii-en = /bits/ 8 <1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + + davinci_mdio: ethernet@0x5c030000 { + compatible = "ti,davinci_mdio"; + ti,hwmods = "davinci_mdio"; + status = "disabled"; + reg = <0x5c030000 0x1000>; + bus_freq = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + uart4: serial@4809e000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart4"; + status = "disabled"; + reg = <0x4809e000 0x400>; + interrupts = <84>; + dmas = <&sdma 55 &sdma 54>; + dma-names = "tx", "rx"; + clock-frequency = <48000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 90ce29dbe119..08a56bcfc724 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -99,22 +99,22 @@ spi-max-frequency = <50000000>; }; }; + }; - pcie-controller { + pcie-controller { + status = "okay"; + /* + * The two PCIe units are accessible through + * both standard PCIe slots and mini-PCIe + * slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + pcie@2,0 { + /* Port 1, Lane 0 */ status = "okay"; - /* - * The two PCIe units are accessible through - * both standard PCIe slots and mini-PCIe - * slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 00d6a798c705..7f10f627ae5b 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -118,7 +118,7 @@ coherency-fabric@20200 { compatible = "marvell,coherency-fabric"; - reg = <0x20200 0xb0>, <0x21810 0x1c>; + reg = <0x20200 0xb0>, <0x21010 0x1c>; }; serial@12000 { diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 3f5e6121c730..98335fb34b7a 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -47,7 +47,7 @@ /* * MV78230 has 2 PCIe units Gen2.0: One unit can be * configured as x4 or quad x1 lanes. One unit is - * x4/x1. + * x1 only. */ pcie-controller { compatible = "marvell,armada-xp-pcie"; @@ -62,10 +62,10 @@ ranges = <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ @@ -74,8 +74,8 @@ 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ - 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ - 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>; + 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>; pcie@1,0 { device_type = "pci"; @@ -145,20 +145,20 @@ status = "disabled"; }; - pcie@9,0 { + pcie@5,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; - reg = <0x4800 0 0 0 0>; + assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; + reg = <0x2800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 - 0x81000000 0 0 0x81000000 0x9 0 1 0>; + ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 + 0x81000000 0 0 0x81000000 0x5 0 1 0>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; - marvell,pcie-port = <2>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; marvell,pcie-lane = <0>; - clocks = <&gateclk 26>; + clocks = <&gateclk 9>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 3e9fd1353f89..66609684d41b 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -48,7 +48,7 @@ /* * MV78260 has 3 PCIe units Gen2.0: Two units can be * configured as x4 or quad x1 lanes. One unit is - * x4/x1. + * x4 only. */ pcie-controller { compatible = "marvell,armada-xp-pcie"; @@ -68,7 +68,9 @@ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */ + 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */ + 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */ + 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ @@ -77,10 +79,18 @@ 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ - 0x82000000 0x9 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ - 0x81000000 0x9 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ - 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */ - 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>; + + 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ + 0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */ + 0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */ + 0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */ + 0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */ + 0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */ + 0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */ + + 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ + 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>; pcie@1,0 { device_type = "pci"; @@ -106,8 +116,8 @@ #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 - 0x81000000 0 0 0x81000000 0x2 0 1 0>; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 59>; marvell,pcie-port = <0>; @@ -150,37 +160,88 @@ status = "disabled"; }; - pcie@9,0 { + pcie@5,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; - reg = <0x4800 0 0 0 0>; + assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; + reg = <0x2800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 - 0x81000000 0 0 0x81000000 0x9 0 1 0>; + ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 + 0x81000000 0 0 0x81000000 0x5 0 1 0>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; - marvell,pcie-port = <2>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; marvell,pcie-lane = <0>; - clocks = <&gateclk 26>; + clocks = <&gateclk 9>; status = "disabled"; }; - pcie@10,0 { + pcie@6,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x82000 0 0x2000>; - reg = <0x5000 0 0 0 0>; + assigned-addresses = <0x82000800 0 0x84000 0 0x2000>; + reg = <0x3000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0 - 0x81000000 0 0 0x81000000 0xa 0 1 0>; + ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0 + 0x81000000 0 0 0x81000000 0x6 0 1 0>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 103>; - marvell,pcie-port = <3>; + interrupt-map = <0 0 0 0 &mpic 63>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 10>; + status = "disabled"; + }; + + pcie@7,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x88000 0 0x2000>; + reg = <0x3800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0 + 0x81000000 0 0 0x81000000 0x7 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 64>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 11>; + status = "disabled"; + }; + + pcie@8,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>; + reg = <0x4000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0 + 0x81000000 0 0 0x81000000 0x8 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 65>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 12>; + status = "disabled"; + }; + + pcie@9,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; + reg = <0x4800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 + 0x81000000 0 0 0x81000000 0x9 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 99>; + marvell,pcie-port = <2>; marvell,pcie-lane = <0>; - clocks = <&gateclk 27>; + clocks = <&gateclk 26>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi index 2347e9563cef..6801106fa1f8 100644 --- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi @@ -11,6 +11,10 @@ #include <dt-bindings/interrupt-controller/irq.h> / { + aliases { + serial4 = &usart3; + }; + ahb { apb { pinctrl@fffff400 { diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 1e12aeff403b..aa537ed13f0a 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -85,6 +85,8 @@ reg = <0x7e205000 0x1000>; interrupts = <2 21>; clocks = <&clk_i2c>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -93,6 +95,8 @@ reg = <0x7e804000 0x1000>; interrupts = <2 21>; clocks = <&clk_i2c>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi index dc259e8b8a73..9b186ac06c8b 100644 --- a/arch/arm/boot/dts/cros5250-common.dtsi +++ b/arch/arm/boot/dts/cros5250-common.dtsi @@ -27,6 +27,13 @@ i2c2_bus: i2c2-bus { samsung,pin-pud = <0>; }; + + max77686_irq: max77686-irq { + samsung,pins = "gpx3-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; i2c@12C60000 { @@ -35,6 +42,11 @@ max77686@09 { compatible = "maxim,max77686"; + interrupt-parent = <&gpx3>; + interrupts = <2 0>; + pinctrl-names = "default"; + pinctrl-0 = <&max77686_irq>; + wakeup-source; reg = <0x09>; voltage-regulators { diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 59154dc15fe4..fb28b2ecb1db 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -161,7 +161,7 @@ clocks = <&clks 197>, <&clks 3>, <&clks 197>, <&clks 107>, <&clks 0>, <&clks 118>, - <&clks 62>, <&clks 139>, + <&clks 0>, <&clks 139>, <&clks 0>; clock-names = "core", "rxtx0", "rxtx1", "rxtx2", diff --git a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi index 9c18adf788f7..f577b7df9a29 100644 --- a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi +++ b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi @@ -44,8 +44,8 @@ gpmc,wr-access-ns = <186>; gpmc,cycle2cycle-samecsen; gpmc,cycle2cycle-diffcsen; - vmmc-supply = <&vddvario>; - vmmc_aux-supply = <&vdd33a>; + vddvario-supply = <&vddvario>; + vdd33a-supply = <&vdd33a>; reg-io-width = <4>; smsc,save-mac-address; }; diff --git a/arch/arm/boot/dts/omap-zoom-common.dtsi b/arch/arm/boot/dts/omap-zoom-common.dtsi index b0ee342598f0..68221fab978d 100644 --- a/arch/arm/boot/dts/omap-zoom-common.dtsi +++ b/arch/arm/boot/dts/omap-zoom-common.dtsi @@ -13,7 +13,7 @@ * they probably share the same GPIO IRQ * REVISIT: Add timing support from slls644g.pdf */ - 8250@3,0 { + uart@3,0 { compatible = "ns16550a"; reg = <3 0 0x100>; bank-width = <2>; diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index a2bfcde858a6..d0c5b37e248c 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -9,6 +9,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pinctrl/omap.h> #include "skeleton.dtsi" @@ -21,6 +22,8 @@ serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; + i2c0 = &i2c1; + i2c1 = &i2c2; }; cpus { @@ -53,6 +56,28 @@ ranges; ti,hwmods = "l3_main"; + aes: aes@480a6000 { + compatible = "ti,omap2-aes"; + ti,hwmods = "aes"; + reg = <0x480a6000 0x50>; + dmas = <&sdma 9 &sdma 10>; + dma-names = "tx", "rx"; + }; + + hdq1w: 1w@480b2000 { + compatible = "ti,omap2420-1w"; + ti,hwmods = "hdq1w"; + reg = <0x480b2000 0x1000>; + interrupts = <58>; + }; + + mailbox: mailbox@48094000 { + compatible = "ti,omap2-mailbox"; + ti,hwmods = "mailbox"; + reg = <0x48094000 0x200>; + interrupts = <26>; + }; + intc: interrupt-controller@1 { compatible = "ti,omap2-intc"; interrupt-controller; @@ -63,6 +88,7 @@ sdma: dma-controller@48056000 { compatible = "ti,omap2430-sdma", "ti,omap2420-sdma"; + ti,hwmods = "dma"; reg = <0x48056000 0x1000>; interrupts = <12>, <13>, @@ -73,21 +99,91 @@ #dma-requests = <64>; }; + i2c1: i2c@48070000 { + compatible = "ti,omap2-i2c"; + ti,hwmods = "i2c1"; + reg = <0x48070000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <56>; + dmas = <&sdma 27 &sdma 28>; + dma-names = "tx", "rx"; + }; + + i2c2: i2c@48072000 { + compatible = "ti,omap2-i2c"; + ti,hwmods = "i2c2"; + reg = <0x48072000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <57>; + dmas = <&sdma 29 &sdma 30>; + dma-names = "tx", "rx"; + }; + + mcspi1: mcspi@48098000 { + compatible = "ti,omap2-mcspi"; + ti,hwmods = "mcspi1"; + reg = <0x48098000 0x100>; + interrupts = <65>; + dmas = <&sdma 35 &sdma 36 &sdma 37 &sdma 38 + &sdma 39 &sdma 40 &sdma 41 &sdma 42>; + dma-names = "tx0", "rx0", "tx1", "rx1", + "tx2", "rx2", "tx3", "rx3"; + }; + + mcspi2: mcspi@4809a000 { + compatible = "ti,omap2-mcspi"; + ti,hwmods = "mcspi2"; + reg = <0x4809a000 0x100>; + interrupts = <66>; + dmas = <&sdma 43 &sdma 44 &sdma 45 &sdma 46>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + }; + + rng: rng@480a0000 { + compatible = "ti,omap2-rng"; + ti,hwmods = "rng"; + reg = <0x480a0000 0x50>; + interrupts = <36>; + }; + + sham: sham@480a4000 { + compatible = "ti,omap2-sham"; + ti,hwmods = "sham"; + reg = <0x480a4000 0x64>; + interrupts = <51>; + dmas = <&sdma 13>; + dma-names = "rx"; + }; + uart1: serial@4806a000 { compatible = "ti,omap2-uart"; ti,hwmods = "uart1"; + reg = <0x4806a000 0x2000>; + interrupts = <72>; + dmas = <&sdma 49 &sdma 50>; + dma-names = "tx", "rx"; clock-frequency = <48000000>; }; uart2: serial@4806c000 { compatible = "ti,omap2-uart"; ti,hwmods = "uart2"; + reg = <0x4806c000 0x400>; + interrupts = <73>; + dmas = <&sdma 51 &sdma 52>; + dma-names = "tx", "rx"; clock-frequency = <48000000>; }; uart3: serial@4806e000 { compatible = "ti,omap2-uart"; ti,hwmods = "uart3"; + reg = <0x4806e000 0x400>; + interrupts = <74>; + dmas = <&sdma 53 &sdma 54>; + dma-names = "tx", "rx"; clock-frequency = <48000000>; }; diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index c8f9c55169ea..60c605de22dd 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -114,6 +114,15 @@ dma-names = "tx", "rx"; }; + msdi1: mmc@4809c000 { + compatible = "ti,omap2420-mmc"; + ti,hwmods = "msdi1"; + reg = <0x4809c000 0x80>; + interrupts = <83>; + dmas = <&sdma 61 &sdma 62>; + dma-names = "tx", "rx"; + }; + timer1: timer@48028000 { compatible = "ti,omap2420-timer"; reg = <0x48028000 0x400>; @@ -121,5 +130,19 @@ ti,hwmods = "timer1"; ti,timer-alwon; }; + + wd_timer2: wdt@48022000 { + compatible = "ti,omap2-wdt"; + ti,hwmods = "wd_timer2"; + reg = <0x48022000 0x80>; + }; }; }; + +&i2c1 { + compatible = "ti,omap2420-i2c"; +}; + +&i2c2 { + compatible = "ti,omap2420-i2c"; +}; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index c535a5a2b27f..d624345666f5 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -175,6 +175,25 @@ dma-names = "tx", "rx"; }; + mmc1: mmc@4809c000 { + compatible = "ti,omap2-hsmmc"; + reg = <0x4809c000 0x200>; + interrupts = <83>; + ti,hwmods = "mmc1"; + ti,dual-volt; + dmas = <&sdma 61>, <&sdma 62>; + dma-names = "tx", "rx"; + }; + + mmc2: mmc@480b4000 { + compatible = "ti,omap2-hsmmc"; + reg = <0x480b4000 0x200>; + interrupts = <86>; + ti,hwmods = "mmc2"; + dmas = <&sdma 47>, <&sdma 48>; + dma-names = "tx", "rx"; + }; + timer1: timer@49018000 { compatible = "ti,omap2420-timer"; reg = <0x49018000 0x400>; @@ -182,5 +201,35 @@ ti,hwmods = "timer1"; ti,timer-alwon; }; + + mcspi3: mcspi@480b8000 { + compatible = "ti,omap2-mcspi"; + ti,hwmods = "mcspi3"; + reg = <0x480b8000 0x100>; + interrupts = <91>; + dmas = <&sdma 15 &sdma 16 &sdma 23 &sdma 24>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + }; + + usb_otg_hs: usb_otg_hs@480ac000 { + compatible = "ti,omap2-musb"; + ti,hwmods = "usb_otg_hs"; + reg = <0x480ac000 0x1000>; + interrupts = <93>; + }; + + wd_timer2: wdt@49016000 { + compatible = "ti,omap2-wdt"; + ti,hwmods = "wd_timer2"; + reg = <0x49016000 0x80>; + }; }; }; + +&i2c1 { + compatible = "ti,omap2430-i2c"; +}; + +&i2c2 { + compatible = "ti,omap2430-i2c"; +}; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 31a632f7effb..df33a50bc070 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -215,3 +215,10 @@ &usbhsehci { phys = <0 &hsusb2_phy>; }; + +&vaux2 { + regulator-name = "usb_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index fa532aaacc68..3ba4a625ea5b 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -61,6 +61,14 @@ vcc-supply = <&hsusb2_power>; }; + sound { + compatible = "ti,omap-twl4030"; + ti,model = "omap3beagle"; + + ti,mcbsp = <&mcbsp2>; + ti,codec = <&twl_audio>; + }; + gpio_keys { compatible = "gpio-keys"; @@ -120,6 +128,12 @@ reg = <0x48>; interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; }; }; @@ -178,3 +192,10 @@ mode = <3>; power = <50>; }; + +&vaux2 { + regulator-name = "vdd_ehci"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index ba1e58b7b7e3..165aaf7591ba 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -1,5 +1,5 @@ /* - * Device Tree Source for IGEP Technology devices + * Common device tree for IGEP boards based on AM/DM37x * * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk> * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> @@ -10,7 +10,7 @@ */ /dts-v1/; -#include "omap34xx.dtsi" +#include "omap36xx.dtsi" / { memory { @@ -24,6 +24,25 @@ ti,mcbsp = <&mcbsp2>; ti,codec = <&twl_audio>; }; + + vdd33: regulator-vdd33 { + compatible = "regulator-fixed"; + regulator-name = "vdd33"; + regulator-always-on; + }; + + lbee1usjyc_vmmc: lbee1usjyc_vmmc { + pinctrl-names = "default"; + pinctrl-0 = <&lbee1usjyc_pins>; + compatible = "regulator-fixed"; + regulator-name = "regulator-lbee1usjyc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* gpio_138 WIFI_PDN */ + startup-delay-us = <10000>; + enable-active-high; + vin-supply = <&vdd33>; + }; }; &omap3_pmx_core { @@ -48,6 +67,15 @@ >; }; + /* WiFi/BT combo */ + lbee1usjyc_pins: pinmux_lbee1usjyc_pins { + pinctrl-single,pins = < + 0x136 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 */ + 0x138 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 */ + 0x13a (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 */ + >; + }; + mcbsp2_pins: pinmux_mcbsp2_pins { pinctrl-single,pins = < 0x10c (PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */ @@ -65,10 +93,17 @@ 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ - 0x120 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */ - 0x122 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */ - 0x124 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */ - 0x126 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ + 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ + 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ + 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ >; }; @@ -78,10 +113,33 @@ >; }; + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ + 0x18c (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + 0x18e (PIN_INPUT | MUX_MODE0) /* i2c2_scl.i2c2_scl */ + 0x190 (PIN_INPUT | MUX_MODE0) /* i2c2_sda.i2c2_sda */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + 0x192 (PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */ + 0x194 (PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */ + >; + }; + leds_pins: pinmux_leds_pins { }; }; &i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; clock-frequency = <2600000>; twl: twl@48 { @@ -101,9 +159,16 @@ #include "twl4030_omap3.dtsi" &i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; clock-frequency = <400000>; }; +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; +}; + &mcbsp2 { pinctrl-names = "default"; pinctrl-0 = <&mcbsp2_pins>; @@ -114,11 +179,15 @@ pinctrl-0 = <&mmc1_pins>; vmmc-supply = <&vmmc1>; vmmc_aux-supply = <&vsim>; - bus-width = <8>; + bus-width = <4>; }; &mmc2 { - status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&lbee1usjyc_vmmc>; + bus-width = <4>; + non-removable; }; &mmc3 { diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index d5cc79267250..1c7e74d2d2bc 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -1,5 +1,5 @@ /* - * Device Tree Source for IGEPv2 board + * Device Tree Source for IGEPv2 Rev. (TI OMAP AM/DM37x) * * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk> * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> @@ -13,7 +13,7 @@ #include "omap-gpmc-smsc911x.dtsi" / { - model = "IGEPv2"; + model = "IGEPv2 (TI OMAP AM/DM37x)"; compatible = "isee,omap3-igep0020", "ti,omap3"; leds { @@ -67,6 +67,8 @@ pinctrl-names = "default"; pinctrl-0 = < &hsusbb1_pins + &tfp410_pins + &dss_pins >; hsusbb1_pins: pinmux_hsusbb1_pins { @@ -85,6 +87,45 @@ 0x5ba (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */ >; }; + + tfp410_pins: tfp410_dvi_pins { + pinctrl-single,pins = < + 0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */ + >; + }; + + dss_pins: pinmux_dss_dvi_pins { + pinctrl-single,pins = < + 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; + }; }; &leds_pins { @@ -174,3 +215,8 @@ &usbhsehci { phys = <&hsusb1_phy>; }; + +&vpll2 { + /* Needed for DSS */ + regulator-name = "vdds_dsi"; +}; diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index 525e6d9b0978..02a23f8a3384 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -1,5 +1,5 @@ /* - * Device Tree Source for IGEP COM Module + * Device Tree Source for IGEP COM MODULE (TI OMAP AM/DM37x) * * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk> * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> @@ -12,7 +12,7 @@ #include "omap3-igep.dtsi" / { - model = "IGEP COM Module"; + model = "IGEP COM MODULE (TI OMAP AM/DM37x)"; compatible = "isee,omap3-igep0030", "ti,omap3"; leds { diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index c4f20bfe4cce..6fc85f963530 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -9,7 +9,7 @@ /dts-v1/; -#include "omap34xx.dtsi" +#include "omap34xx-hs.dtsi" / { model = "Nokia N900"; @@ -125,6 +125,21 @@ >; }; + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */ + 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */ + 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */ + 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */ + 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */ + 0x136 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */ + 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */ + 0x13a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */ + >; + }; + display_pins: pinmux_display_pins { pinctrl-single,pins = < 0x0d4 (PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */ @@ -358,8 +373,14 @@ cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */ }; +/* most boards use vaux3, only some old versions use vmmc2 instead */ &mmc2 { - status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&vaux3>; + vmmc_aux-supply = <&vsim>; + bus-width = <8>; + non-removable; }; &mmc3 { diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index 94eb77d3b9dd..5c26c184f2c1 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -8,7 +8,7 @@ * published by the Free Software Foundation. */ -#include "omap36xx.dtsi" +#include "omap36xx-hs.dtsi" / { cpus { diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index f3a0c26ed0c2..daabf99d402a 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -82,6 +82,13 @@ ranges; ti,hwmods = "l3_main"; + aes: aes@480c5000 { + compatible = "ti,omap3-aes"; + ti,hwmods = "aes"; + reg = <0x480c5000 0x50>; + interrupts = <0>; + }; + counter32k: counter@48320000 { compatible = "ti,omap-counter32k"; reg = <0x48320000 0x20>; @@ -260,6 +267,13 @@ ti,hwmods = "i2c3"; }; + mailbox: mailbox@48094000 { + compatible = "ti,omap3-mailbox"; + ti,hwmods = "mailbox"; + reg = <0x48094000 0x200>; + interrupts = <26>; + }; + mcspi1: spi@48098000 { compatible = "ti,omap2-mcspi"; reg = <0x48098000 0x100>; @@ -357,6 +371,13 @@ dma-names = "tx", "rx"; }; + mmu_isp: mmu@480bd400 { + compatible = "ti,omap3-mmu-isp"; + ti,hwmods = "mmu_isp"; + reg = <0x480bd400 0x80>; + interrupts = <8>; + }; + wdt2: wdt@48314000 { compatible = "ti,omap3-wdt"; reg = <0x48314000 0x80>; @@ -442,6 +463,27 @@ dma-names = "tx", "rx"; }; + sham: sham@480c3000 { + compatible = "ti,omap3-sham"; + ti,hwmods = "sham"; + reg = <0x480c3000 0x64>; + interrupts = <49>; + }; + + smartreflex_core: smartreflex@480cb000 { + compatible = "ti,omap3-smartreflex-core"; + ti,hwmods = "smartreflex_core"; + reg = <0x480cb000 0x400>; + interrupts = <19>; + }; + + smartreflex_mpu_iva: smartreflex@480c9000 { + compatible = "ti,omap3-smartreflex-iva"; + ti,hwmods = "smartreflex_mpu_iva"; + reg = <0x480c9000 0x400>; + interrupts = <18>; + }; + timer1: timer@48318000 { compatible = "ti,omap3430-timer"; reg = <0x48318000 0x400>; diff --git a/arch/arm/boot/dts/omap34xx-hs.dtsi b/arch/arm/boot/dts/omap34xx-hs.dtsi new file mode 100644 index 000000000000..1ff626489546 --- /dev/null +++ b/arch/arm/boot/dts/omap34xx-hs.dtsi @@ -0,0 +1,16 @@ +/* Disabled modules for secure omaps */ + +#include "omap34xx.dtsi" + +/* Secure omaps have some devices inaccessible depending on the firmware */ +&aes { + status = "disabled"; +}; + +&sham { + status = "disabled"; +}; + +&timer12 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap36xx-hs.dtsi b/arch/arm/boot/dts/omap36xx-hs.dtsi new file mode 100644 index 000000000000..2c7febb0e016 --- /dev/null +++ b/arch/arm/boot/dts/omap36xx-hs.dtsi @@ -0,0 +1,16 @@ +/* Disabled modules for secure omaps */ + +#include "omap36xx.dtsi" + +/* Secure omaps have some devices inaccessible depending on the firmware */ +&aes { + status = "disabled"; +}; + +&sham { + status = "disabled"; +}; + +&timer12 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 298e85020e1b..88c6a05cab41 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -246,15 +246,6 @@ 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ >; }; -}; - -&omap4_pmx_wkup { - led_wkgpio_pins: pinmux_leds_wkpins { - pinctrl-single,pins = < - 0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */ - 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ - >; - }; /* * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP @@ -274,7 +265,7 @@ pinctrl-single,pins = < 0x38 (PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */ 0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ - 0x108 (PIN_OUTPUT | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ + 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ 0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */ 0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */ 0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */ @@ -284,6 +275,15 @@ }; }; +&omap4_pmx_wkup { + led_wkgpio_pins: pinmux_leds_wkpins { + pinctrl-single,pins = < + 0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */ + 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ + >; + }; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 5fc3f43c5a81..dbc81fb6ef03 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -300,12 +300,12 @@ wl12xx_pins: pinmux_wl12xx_pins { pinctrl-single,pins = < 0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ - 0x108 (PIN_OUTPUT | MUX_MODE3) /* sdmmc5_clk.sdmmc5_clk */ - 0x10a (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_cmd.sdmmc5_cmd */ - 0x10c (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat0.sdmmc5_dat0 */ - 0x10e (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat1.sdmmc5_dat1 */ - 0x110 (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat2.sdmmc5_dat2 */ - 0x112 (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat3.sdmmc5_dat3 */ + 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ + 0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */ + 0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */ + 0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */ + 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */ + 0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */ >; }; }; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index ee845fad939b..9987dd0e9c59 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -87,9 +87,9 @@ interrupts = <1 9 0xf04>; }; - gpio0: gpio@ffc40000 { + gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; - reg = <0 0xffc40000 0 0x2c>; + reg = <0 0xe6050000 0 0x50>; interrupt-parent = <&gic>; interrupts = <0 4 0x4>; #gpio-cells = <2>; @@ -99,9 +99,9 @@ interrupt-controller; }; - gpio1: gpio@ffc41000 { + gpio1: gpio@e6051000 { compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; - reg = <0 0xffc41000 0 0x2c>; + reg = <0 0xe6051000 0 0x50>; interrupt-parent = <&gic>; interrupts = <0 5 0x4>; #gpio-cells = <2>; @@ -111,9 +111,9 @@ interrupt-controller; }; - gpio2: gpio@ffc42000 { + gpio2: gpio@e6052000 { compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; - reg = <0 0xffc42000 0 0x2c>; + reg = <0 0xe6052000 0 0x50>; interrupt-parent = <&gic>; interrupts = <0 6 0x4>; #gpio-cells = <2>; @@ -123,9 +123,9 @@ interrupt-controller; }; - gpio3: gpio@ffc43000 { + gpio3: gpio@e6053000 { compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; - reg = <0 0xffc43000 0 0x2c>; + reg = <0 0xe6053000 0 0x50>; interrupt-parent = <&gic>; interrupts = <0 7 0x4>; #gpio-cells = <2>; @@ -135,9 +135,9 @@ interrupt-controller; }; - gpio4: gpio@ffc44000 { + gpio4: gpio@e6054000 { compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; - reg = <0 0xffc44000 0 0x2c>; + reg = <0 0xe6054000 0 0x50>; interrupt-parent = <&gic>; interrupts = <0 8 0x4>; #gpio-cells = <2>; @@ -147,9 +147,9 @@ interrupt-controller; }; - gpio5: gpio@ffc45000 { + gpio5: gpio@e6055000 { compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; - reg = <0 0xffc45000 0 0x2c>; + reg = <0 0xe6055000 0 0x50>; interrupt-parent = <&gic>; interrupts = <0 9 0x4>; #gpio-cells = <2>; @@ -241,7 +241,7 @@ sdhi0: sdhi@ee100000 { compatible = "renesas,sdhi-r8a7790"; - reg = <0 0xee100000 0 0x100>; + reg = <0 0xee100000 0 0x200>; interrupt-parent = <&gic>; interrupts = <0 165 4>; cap-sd-highspeed; @@ -250,7 +250,7 @@ sdhi1: sdhi@ee120000 { compatible = "renesas,sdhi-r8a7790"; - reg = <0 0xee120000 0 0x100>; + reg = <0 0xee120000 0 0x200>; interrupt-parent = <&gic>; interrupts = <0 166 4>; cap-sd-highspeed; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 6d09b8d42fdd..f936476c2753 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -245,14 +245,14 @@ mpu_periph_clk: mpu_periph_clk { #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; + compatible = "altr,socfpga-perip-clk"; clocks = <&mpuclk>; fixed-divider = <4>; }; mpu_l2_ram_clk: mpu_l2_ram_clk { #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; + compatible = "altr,socfpga-perip-clk"; clocks = <&mpuclk>; fixed-divider = <2>; }; @@ -266,8 +266,9 @@ l3_main_clk: l3_main_clk { #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; + compatible = "altr,socfpga-perip-clk"; clocks = <&mainclk>; + fixed-divider = <1>; }; l3_mp_clk: l3_mp_clk { diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index c1751a64889a..7f5878c2784a 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -193,7 +193,10 @@ pio: pinctrl@01c20800 { compatible = "allwinner,sun6i-a31-pinctrl"; reg = <0x01c20800 0x400>; - interrupts = <0 11 1>, <0 15 1>, <0 16 1>, <0 17 1>; + interrupts = <0 11 4>, + <0 15 4>, + <0 16 4>, + <0 17 4>; clocks = <&apb1_gates 5>; gpio-controller; interrupt-controller; @@ -212,11 +215,11 @@ timer@01c20c00 { compatible = "allwinner,sun4i-timer"; reg = <0x01c20c00 0xa0>; - interrupts = <0 18 1>, - <0 19 1>, - <0 20 1>, - <0 21 1>, - <0 22 1>; + interrupts = <0 18 4>, + <0 19 4>, + <0 20 4>, + <0 21 4>, + <0 22 4>; clocks = <&osc24M>; }; @@ -228,7 +231,7 @@ uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; - interrupts = <0 0 1>; + interrupts = <0 0 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 16>; @@ -238,7 +241,7 @@ uart1: serial@01c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; - interrupts = <0 1 1>; + interrupts = <0 1 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 17>; @@ -248,7 +251,7 @@ uart2: serial@01c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; - interrupts = <0 2 1>; + interrupts = <0 2 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 18>; @@ -258,7 +261,7 @@ uart3: serial@01c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; - interrupts = <0 3 1>; + interrupts = <0 3 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 19>; @@ -268,7 +271,7 @@ uart4: serial@01c29000 { compatible = "snps,dw-apb-uart"; reg = <0x01c29000 0x400>; - interrupts = <0 4 1>; + interrupts = <0 4 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 20>; @@ -278,7 +281,7 @@ uart5: serial@01c29400 { compatible = "snps,dw-apb-uart"; reg = <0x01c29400 0x400>; - interrupts = <0 5 1>; + interrupts = <0 5 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 21>; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index e46cfedde74c..367611a0730b 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -170,7 +170,7 @@ emac: ethernet@01c0b000 { compatible = "allwinner,sun4i-emac"; reg = <0x01c0b000 0x1000>; - interrupts = <0 55 1>; + interrupts = <0 55 4>; clocks = <&ahb_gates 17>; status = "disabled"; }; @@ -186,7 +186,7 @@ pio: pinctrl@01c20800 { compatible = "allwinner,sun7i-a20-pinctrl"; reg = <0x01c20800 0x400>; - interrupts = <0 28 1>; + interrupts = <0 28 4>; clocks = <&apb0_gates 5>; gpio-controller; interrupt-controller; @@ -251,12 +251,12 @@ timer@01c20c00 { compatible = "allwinner,sun4i-timer"; reg = <0x01c20c00 0x90>; - interrupts = <0 22 1>, - <0 23 1>, - <0 24 1>, - <0 25 1>, - <0 67 1>, - <0 68 1>; + interrupts = <0 22 4>, + <0 23 4>, + <0 24 4>, + <0 25 4>, + <0 67 4>, + <0 68 4>; clocks = <&osc24M>; }; @@ -273,7 +273,7 @@ uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; - interrupts = <0 1 1>; + interrupts = <0 1 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 16>; @@ -283,7 +283,7 @@ uart1: serial@01c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; - interrupts = <0 2 1>; + interrupts = <0 2 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 17>; @@ -293,7 +293,7 @@ uart2: serial@01c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; - interrupts = <0 3 1>; + interrupts = <0 3 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 18>; @@ -303,7 +303,7 @@ uart3: serial@01c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; - interrupts = <0 4 1>; + interrupts = <0 4 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 19>; @@ -313,7 +313,7 @@ uart4: serial@01c29000 { compatible = "snps,dw-apb-uart"; reg = <0x01c29000 0x400>; - interrupts = <0 17 1>; + interrupts = <0 17 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 20>; @@ -323,7 +323,7 @@ uart5: serial@01c29400 { compatible = "snps,dw-apb-uart"; reg = <0x01c29400 0x400>; - interrupts = <0 18 1>; + interrupts = <0 18 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 21>; @@ -333,7 +333,7 @@ uart6: serial@01c29800 { compatible = "snps,dw-apb-uart"; reg = <0x01c29800 0x400>; - interrupts = <0 19 1>; + interrupts = <0 19 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 22>; @@ -343,7 +343,7 @@ uart7: serial@01c29c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c29c00 0x400>; - interrupts = <0 20 1>; + interrupts = <0 20 4>; reg-shift = <2>; reg-io-width = <4>; clocks = <&apb1_gates 23>; @@ -353,7 +353,7 @@ i2c0: i2c@01c2ac00 { compatible = "allwinner,sun4i-i2c"; reg = <0x01c2ac00 0x400>; - interrupts = <0 7 1>; + interrupts = <0 7 4>; clocks = <&apb1_gates 0>; clock-frequency = <100000>; status = "disabled"; @@ -362,7 +362,7 @@ i2c1: i2c@01c2b000 { compatible = "allwinner,sun4i-i2c"; reg = <0x01c2b000 0x400>; - interrupts = <0 8 1>; + interrupts = <0 8 4>; clocks = <&apb1_gates 1>; clock-frequency = <100000>; status = "disabled"; @@ -371,7 +371,7 @@ i2c2: i2c@01c2b400 { compatible = "allwinner,sun4i-i2c"; reg = <0x01c2b400 0x400>; - interrupts = <0 9 1>; + interrupts = <0 9 4>; clocks = <&apb1_gates 2>; clock-frequency = <100000>; status = "disabled"; @@ -380,7 +380,7 @@ i2c3: i2c@01c2b800 { compatible = "allwinner,sun4i-i2c"; reg = <0x01c2b800 0x400>; - interrupts = <0 88 1>; + interrupts = <0 88 4>; clocks = <&apb1_gates 3>; clock-frequency = <100000>; status = "disabled"; @@ -389,7 +389,7 @@ i2c4: i2c@01c2bc00 { compatible = "allwinner,sun4i-i2c"; reg = <0x01c2bc00 0x400>; - interrupts = <0 89 1>; + interrupts = <0 89 4>; clocks = <&apb1_gates 15>; clock-frequency = <100000>; status = "disabled"; diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c index 26020a03f659..1e361abc29eb 100644 --- a/arch/arm/common/mcpm_entry.c +++ b/arch/arm/common/mcpm_entry.c @@ -35,8 +35,7 @@ void mcpm_set_early_poke(unsigned cpu, unsigned cluster, unsigned long *poke = &mcpm_entry_early_pokes[cluster][cpu][0]; poke[0] = poke_phys_addr; poke[1] = poke_val; - __cpuc_flush_dcache_area((void *)poke, 8); - outer_clean_range(__pa(poke), __pa(poke + 2)); + __sync_cache_range_w(poke, 2 * sizeof(*poke)); } static const struct mcpm_platform_ops *platform_ops; @@ -167,7 +166,7 @@ void __mcpm_cpu_down(unsigned int cpu, unsigned int cluster) dmb(); mcpm_sync.clusters[cluster].cpus[cpu].cpu = CPU_DOWN; sync_cache_w(&mcpm_sync.clusters[cluster].cpus[cpu].cpu); - dsb_sev(); + sev(); } /* @@ -183,7 +182,7 @@ void __mcpm_outbound_leave_critical(unsigned int cluster, int state) dmb(); mcpm_sync.clusters[cluster].cluster = state; sync_cache_w(&mcpm_sync.clusters[cluster].cluster); - dsb_sev(); + sev(); } /* diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 4a5903e04827..c1df4e9db140 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -69,6 +69,7 @@ CONFIG_KS8851=y CONFIG_SMSC911X=y CONFIG_STMMAC_ETH=y CONFIG_MDIO_SUN4I=y +CONFIG_TI_CPSW=y CONFIG_KEYBOARD_SPEAR=y CONFIG_SERIO_AMBAKMI=y CONFIG_SERIAL_8250=y @@ -133,12 +134,14 @@ CONFIG_USB_GPIO_VBUS=y CONFIG_USB_ISP1301=y CONFIG_USB_MXS_PHY=y CONFIG_MMC=y +CONFIG_MMC_BLOCK_MINORS=16 CONFIG_MMC_ARMMMCI=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_ESDHC_IMX=y CONFIG_MMC_SDHCI_TEGRA=y CONFIG_MMC_SDHCI_SPEAR=y +CONFIG_MMC_SDHCI_BCM_KONA=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y CONFIG_EDAC=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 98a50c309b90..bfa80a11e8c7 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -173,6 +173,7 @@ CONFIG_MFD_PALMAS=y CONFIG_MFD_TPS65217=y CONFIG_MFD_TPS65910=y CONFIG_TWL6040_CORE=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_PALMAS=y CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index d57a85badb5e..3e2259b60236 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -12,6 +12,9 @@ CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set @@ -58,4 +61,8 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_COMMON_CLK_DEBUG=y # CONFIG_IOMMU_SUPPORT is not set +CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y CONFIG_NLS=y +CONFIG_PRINTK_TIME=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index ac632cc38f24..c6ebc184bf68 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -22,6 +22,7 @@ CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8" CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_IDLE=y +CONFIG_ARM_U8500_CPUIDLE=y CONFIG_VFP=y CONFIG_NEON=y CONFIG_PM_RUNTIME=y @@ -109,6 +110,8 @@ CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_MISC_FILESYSTEMS is not set diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index ee753f1749cd..e9a49fe0284e 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -481,4 +481,9 @@ static inline void __sync_cache_range_r(volatile void *p, size_t size) : : : "r0","r1","r2","r3","r4","r5","r6","r7", \ "r9","r10","lr","memory" ) +int set_memory_ro(unsigned long addr, int numpages); +int set_memory_rw(unsigned long addr, int numpages); +int set_memory_x(unsigned long addr, int numpages); +int set_memory_nx(unsigned long addr, int numpages); + #endif diff --git a/arch/arm/include/asm/checksum.h b/arch/arm/include/asm/checksum.h index 6dcc16430868..523315115478 100644 --- a/arch/arm/include/asm/checksum.h +++ b/arch/arm/include/asm/checksum.h @@ -87,19 +87,33 @@ static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, unsigned short proto, __wsum sum) { - __asm__( - "adds %0, %1, %2 @ csum_tcpudp_nofold \n\ - adcs %0, %0, %3 \n" + u32 lenprot = len | proto << 16; + if (__builtin_constant_p(sum) && sum == 0) { + __asm__( + "adds %0, %1, %2 @ csum_tcpudp_nofold0 \n\t" #ifdef __ARMEB__ - "adcs %0, %0, %4 \n" + "adcs %0, %0, %3 \n\t" #else - "adcs %0, %0, %4, lsl #8 \n" + "adcs %0, %0, %3, ror #8 \n\t" #endif - "adcs %0, %0, %5 \n\ - adc %0, %0, #0" - : "=&r"(sum) - : "r" (sum), "r" (daddr), "r" (saddr), "r" (len), "Ir" (htons(proto)) - : "cc"); + "adc %0, %0, #0" + : "=&r" (sum) + : "r" (daddr), "r" (saddr), "r" (lenprot) + : "cc"); + } else { + __asm__( + "adds %0, %1, %2 @ csum_tcpudp_nofold \n\t" + "adcs %0, %0, %3 \n\t" +#ifdef __ARMEB__ + "adcs %0, %0, %4 \n\t" +#else + "adcs %0, %0, %4, ror #8 \n\t" +#endif + "adc %0, %0, #0" + : "=&r"(sum) + : "r" (sum), "r" (daddr), "r" (saddr), "r" (lenprot) + : "cc"); + } return sum; } /* diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 3b2c40b5bfa2..6795ff743b3d 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -131,6 +131,7 @@ struct l2x0_regs { unsigned long prefetch_ctrl; unsigned long pwr_ctrl; unsigned long ctrl; + unsigned long aux2_ctrl; }; extern struct l2x0_regs l2x0_saved_regs; diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h index 2fe141fcc8d6..f98c7f32c9c8 100644 --- a/arch/arm/include/asm/mach/map.h +++ b/arch/arm/include/asm/mach/map.h @@ -22,18 +22,21 @@ struct map_desc { }; /* types 0-3 are defined in asm/io.h */ -#define MT_UNCACHED 4 -#define MT_CACHECLEAN 5 -#define MT_MINICLEAN 6 -#define MT_LOW_VECTORS 7 -#define MT_HIGH_VECTORS 8 -#define MT_MEMORY 9 -#define MT_ROM 10 -#define MT_MEMORY_NONCACHED 11 -#define MT_MEMORY_DTCM 12 -#define MT_MEMORY_ITCM 13 -#define MT_MEMORY_SO 14 -#define MT_MEMORY_DMA_READY 15 +enum { + MT_UNCACHED = 4, + MT_CACHECLEAN, + MT_MINICLEAN, + MT_LOW_VECTORS, + MT_HIGH_VECTORS, + MT_MEMORY_RWX, + MT_MEMORY_RW, + MT_ROM, + MT_MEMORY_RWX_NONCACHED, + MT_MEMORY_RW_DTCM, + MT_MEMORY_RWX_ITCM, + MT_MEMORY_RW_SO, + MT_MEMORY_DMA_READY, +}; #ifdef CONFIG_MMU extern void iotable_init(struct map_desc *, int); diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h index a98a2e112fae..680a83e94467 100644 --- a/arch/arm/include/asm/pci.h +++ b/arch/arm/include/asm/pci.h @@ -57,12 +57,9 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev, extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state, int write_combine); -/* - * Dummy implementation; always return 0. - */ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) { - return 0; + return channel ? 15 : 14; } #endif /* __KERNEL__ */ diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h index 86a659a19526..dfff709fda3c 100644 --- a/arch/arm/include/asm/pgtable-2level.h +++ b/arch/arm/include/asm/pgtable-2level.h @@ -160,6 +160,7 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr) return (pmd_t *)pud; } +#define pmd_large(pmd) (pmd_val(pmd) & 2) #define pmd_bad(pmd) (pmd_val(pmd) & 2) #define copy_pmd(pmdpd,pmdps) \ diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h index 4f9503908dca..03243f7eeddf 100644 --- a/arch/arm/include/asm/pgtable-3level.h +++ b/arch/arm/include/asm/pgtable-3level.h @@ -142,6 +142,7 @@ PMD_TYPE_TABLE) #define pmd_sect(pmd) ((pmd_val(pmd) & PMD_TYPE_MASK) == \ PMD_TYPE_SECT) +#define pmd_large(pmd) pmd_sect(pmd) #define pud_clear(pudp) \ do { \ diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 1571d126e9dd..7d59b524f2af 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -254,6 +254,8 @@ PTE_BIT_FUNC(mkclean, &= ~L_PTE_DIRTY); PTE_BIT_FUNC(mkdirty, |= L_PTE_DIRTY); PTE_BIT_FUNC(mkold, &= ~L_PTE_YOUNG); PTE_BIT_FUNC(mkyoung, |= L_PTE_YOUNG); +PTE_BIT_FUNC(mkexec, &= ~L_PTE_XN); +PTE_BIT_FUNC(mknexec, |= L_PTE_XN); static inline pte_t pte_mkspecial(pte_t pte) { return pte; } diff --git a/arch/arm/include/asm/word-at-a-time.h b/arch/arm/include/asm/word-at-a-time.h index 4d52f92967a6..a6d0a29861e7 100644 --- a/arch/arm/include/asm/word-at-a-time.h +++ b/arch/arm/include/asm/word-at-a-time.h @@ -48,10 +48,14 @@ static inline unsigned long find_zero(unsigned long mask) return ret; } -#ifdef CONFIG_DCACHE_WORD_ACCESS - #define zero_bytemask(mask) (mask) +#else /* __ARMEB__ */ +#include <asm-generic/word-at-a-time.h> +#endif + +#ifdef CONFIG_DCACHE_WORD_ACCESS + /* * Load an unaligned word from kernel space. * @@ -73,7 +77,11 @@ static inline unsigned long load_unaligned_zeropad(const void *addr) " bic %2, %2, #0x3\n" " ldr %0, [%2]\n" " lsl %1, %1, #0x3\n" +#ifndef __ARMEB__ " lsr %0, %0, %1\n" +#else + " lsl %0, %0, %1\n" +#endif " b 2b\n" " .popsection\n" " .pushsection __ex_table,\"a\"\n" @@ -86,11 +94,5 @@ static inline unsigned long load_unaligned_zeropad(const void *addr) return ret; } - #endif /* DCACHE_WORD_ACCESS */ - -#else /* __ARMEB__ */ -#include <asm-generic/word-at-a-time.h> -#endif - #endif /* __ASM_ARM_WORD_AT_A_TIME_H */ diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index 1f031ddd0667..85e664b6a5f1 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -35,6 +35,8 @@ extern void __ucmpdi2(void); extern void __udivsi3(void); extern void __umodsi3(void); extern void __do_div64(void); +extern void __bswapsi2(void); +extern void __bswapdi2(void); extern void __aeabi_idiv(void); extern void __aeabi_idivmod(void); @@ -114,6 +116,8 @@ EXPORT_SYMBOL(__ucmpdi2); EXPORT_SYMBOL(__udivsi3); EXPORT_SYMBOL(__umodsi3); EXPORT_SYMBOL(__do_div64); +EXPORT_SYMBOL(__bswapsi2); +EXPORT_SYMBOL(__bswapdi2); #ifdef CONFIG_AEABI EXPORT_SYMBOL(__aeabi_idiv); diff --git a/arch/arm/kernel/entry-v7m.S b/arch/arm/kernel/entry-v7m.S index 52b26432c9a9..2260f1855820 100644 --- a/arch/arm/kernel/entry-v7m.S +++ b/arch/arm/kernel/entry-v7m.S @@ -14,8 +14,6 @@ #include <asm/thread_notify.h> #include <asm/v7m.h> -#include <mach/entry-macro.S> - #include "entry-header.S" #ifdef CONFIG_TRACE_IRQFLAGS diff --git a/arch/arm/kernel/etm.c b/arch/arm/kernel/etm.c index 8ff0ecdc637f..131a6ab5f355 100644 --- a/arch/arm/kernel/etm.c +++ b/arch/arm/kernel/etm.c @@ -385,7 +385,6 @@ out: return ret; out_unmap: - amba_set_drvdata(dev, NULL); iounmap(t->etb_regs); out_release: @@ -398,8 +397,6 @@ static int etb_remove(struct amba_device *dev) { struct tracectx *t = amba_get_drvdata(dev); - amba_set_drvdata(dev, NULL); - iounmap(t->etb_regs); t->etb_regs = NULL; @@ -588,7 +585,6 @@ out: return ret; out_unmap: - amba_set_drvdata(dev, NULL); iounmap(t->etm_regs); out_release: @@ -601,8 +597,6 @@ static int etm_remove(struct amba_device *dev) { struct tracectx *t = amba_get_drvdata(dev); - amba_set_drvdata(dev, NULL); - iounmap(t->etm_regs); t->etm_regs = NULL; diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 987a7f5bce5f..061cea820e3f 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -334,7 +334,7 @@ static void __init cacheid_init(void) cacheid = CACHEID_VIVT; } - printk("CPU: %s data cache, %s instruction cache\n", + pr_info("CPU: %s data cache, %s instruction cache\n", cache_is_vivt() ? "VIVT" : cache_is_vipt_aliasing() ? "VIPT aliasing" : cache_is_vipt_nonaliasing() ? "PIPT / VIPT nonaliasing" : "unknown", @@ -416,7 +416,7 @@ void notrace cpu_init(void) struct stack *stk = &stacks[cpu]; if (cpu >= NR_CPUS) { - printk(KERN_CRIT "CPU%u: bad primary CPU number\n", cpu); + pr_crit("CPU%u: bad primary CPU number\n", cpu); BUG(); } @@ -484,7 +484,7 @@ void __init smp_setup_processor_id(void) */ set_my_cpu_offset(0); - printk(KERN_INFO "Booting Linux on physical CPU 0x%x\n", mpidr); + pr_info("Booting Linux on physical CPU 0x%x\n", mpidr); } struct mpidr_hash mpidr_hash; @@ -564,8 +564,8 @@ static void __init setup_processor(void) */ list = lookup_processor_type(read_cpuid_id()); if (!list) { - printk("CPU configuration botched (ID %08x), unable " - "to continue.\n", read_cpuid_id()); + pr_err("CPU configuration botched (ID %08x), unable to continue.\n", + read_cpuid_id()); while (1); } @@ -585,9 +585,9 @@ static void __init setup_processor(void) cpu_cache = *list->cache; #endif - printk("CPU: %s [%08x] revision %d (ARMv%s), cr=%08lx\n", - cpu_name, read_cpuid_id(), read_cpuid_id() & 15, - proc_arch[cpu_architecture()], cr_alignment); + pr_info("CPU: %s [%08x] revision %d (ARMv%s), cr=%08lx\n", + cpu_name, read_cpuid_id(), read_cpuid_id() & 15, + proc_arch[cpu_architecture()], cr_alignment); snprintf(init_utsname()->machine, __NEW_UTS_LEN + 1, "%s%c", list->arch_name, ENDIANNESS); @@ -629,8 +629,8 @@ int __init arm_add_memory(u64 start, u64 size) u64 aligned_start; if (meminfo.nr_banks >= NR_BANKS) { - printk(KERN_CRIT "NR_BANKS too low, " - "ignoring memory at 0x%08llx\n", (long long)start); + pr_crit("NR_BANKS too low, ignoring memory at 0x%08llx\n", + (long long)start); return -EINVAL; } @@ -643,14 +643,14 @@ int __init arm_add_memory(u64 start, u64 size) #ifndef CONFIG_ARCH_PHYS_ADDR_T_64BIT if (aligned_start > ULONG_MAX) { - printk(KERN_CRIT "Ignoring memory at 0x%08llx outside " - "32-bit physical address space\n", (long long)start); + pr_crit("Ignoring memory at 0x%08llx outside 32-bit physical address space\n", + (long long)start); return -EINVAL; } if (aligned_start + size > ULONG_MAX) { - printk(KERN_CRIT "Truncating memory at 0x%08llx to fit in " - "32-bit physical address space\n", (long long)start); + pr_crit("Truncating memory at 0x%08llx to fit in 32-bit physical address space\n", + (long long)start); /* * To ensure bank->start + bank->size is representable in * 32 bits, we use ULONG_MAX as the upper limit rather than 4GB. @@ -660,6 +660,20 @@ int __init arm_add_memory(u64 start, u64 size) } #endif + if (aligned_start < PHYS_OFFSET) { + if (aligned_start + size <= PHYS_OFFSET) { + pr_info("Ignoring memory below PHYS_OFFSET: 0x%08llx-0x%08llx\n", + aligned_start, aligned_start + size); + return -EINVAL; + } + + pr_info("Ignoring memory below PHYS_OFFSET: 0x%08llx-0x%08llx\n", + aligned_start, (u64)PHYS_OFFSET); + + size -= PHYS_OFFSET - aligned_start; + aligned_start = PHYS_OFFSET; + } + bank->start = aligned_start; bank->size = size & ~(phys_addr_t)(PAGE_SIZE - 1); @@ -819,16 +833,15 @@ static void __init reserve_crashkernel(void) ret = reserve_bootmem(crash_base, crash_size, BOOTMEM_EXCLUSIVE); if (ret < 0) { - printk(KERN_WARNING "crashkernel reservation failed - " - "memory is in use (0x%lx)\n", (unsigned long)crash_base); + pr_warn("crashkernel reservation failed - memory is in use (0x%lx)\n", + (unsigned long)crash_base); return; } - printk(KERN_INFO "Reserving %ldMB of memory at %ldMB " - "for crashkernel (System RAM: %ldMB)\n", - (unsigned long)(crash_size >> 20), - (unsigned long)(crash_base >> 20), - (unsigned long)(total_mem >> 20)); + pr_info("Reserving %ldMB of memory at %ldMB for crashkernel (System RAM: %ldMB)\n", + (unsigned long)(crash_size >> 20), + (unsigned long)(crash_base >> 20), + (unsigned long)(total_mem >> 20)); crashk_res.start = crash_base; crashk_res.end = crash_base + crash_size - 1; diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index dc894ab3622b..b7b4c86e338b 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -105,8 +105,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle) secondary_data.pgdir = get_arch_pgd(idmap_pgd); secondary_data.swapper_pg_dir = get_arch_pgd(swapper_pg_dir); #endif - __cpuc_flush_dcache_area(&secondary_data, sizeof(secondary_data)); - outer_clean_range(__pa(&secondary_data), __pa(&secondary_data + 1)); + sync_cache_w(&secondary_data); /* * Now bring the CPU into our world. @@ -294,6 +293,9 @@ void __ref cpu_die(void) if (smp_ops.cpu_die) smp_ops.cpu_die(cpu); + pr_warn("CPU%u: smp_ops.cpu_die() returned, trying to resuscitate\n", + cpu); + /* * Do not return to the idle loop - jump back to the secondary * cpu initialisation. There's some initialisation which needs diff --git a/arch/arm/kernel/tcm.c b/arch/arm/kernel/tcm.c index f50f19e5c138..7a3be1d4d0b1 100644 --- a/arch/arm/kernel/tcm.c +++ b/arch/arm/kernel/tcm.c @@ -52,7 +52,7 @@ static struct map_desc dtcm_iomap[] __initdata = { .virtual = DTCM_OFFSET, .pfn = __phys_to_pfn(DTCM_OFFSET), .length = 0, - .type = MT_MEMORY_DTCM + .type = MT_MEMORY_RW_DTCM } }; @@ -61,7 +61,7 @@ static struct map_desc itcm_iomap[] __initdata = { .virtual = ITCM_OFFSET, .pfn = __phys_to_pfn(ITCM_OFFSET), .length = 0, - .type = MT_MEMORY_ITCM + .type = MT_MEMORY_RWX_ITCM, } }; diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index 85a87370f144..0bc94b1fd1ae 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -68,16 +68,16 @@ struct cpu_efficiency { * Processors that are not defined in the table, * use the default SCHED_POWER_SCALE value for cpu_scale. */ -struct cpu_efficiency table_efficiency[] = { +static const struct cpu_efficiency table_efficiency[] = { {"arm,cortex-a15", 3891}, {"arm,cortex-a7", 2048}, {NULL, }, }; -unsigned long *__cpu_capacity; +static unsigned long *__cpu_capacity; #define cpu_capacity(cpu) __cpu_capacity[cpu] -unsigned long middle_capacity = 1; +static unsigned long middle_capacity = 1; /* * Iterate all CPUs' descriptor in DT and compute the efficiency @@ -89,7 +89,7 @@ unsigned long middle_capacity = 1; */ static void __init parse_dt_topology(void) { - struct cpu_efficiency *cpu_eff; + const struct cpu_efficiency *cpu_eff; struct device_node *cn = NULL; unsigned long min_capacity = (unsigned long)(-1); unsigned long max_capacity = 0; @@ -158,7 +158,7 @@ static void __init parse_dt_topology(void) * boot. The update of all CPUs is in O(n^2) for heteregeneous system but the * function returns directly for SMP system. */ -void update_cpu_power(unsigned int cpu) +static void update_cpu_power(unsigned int cpu) { if (!cpu_capacity(cpu)) return; @@ -185,7 +185,7 @@ const struct cpumask *cpu_coregroup_mask(int cpu) return &cpu_topology[cpu].core_sibling; } -void update_siblings_masks(unsigned int cpuid) +static void update_siblings_masks(unsigned int cpuid) { struct cputopo_arm *cpu_topo, *cpuid_topo = &cpu_topology[cpuid]; int cpu; diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 4636d56af2db..172ee18ff124 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -62,7 +62,7 @@ static void dump_mem(const char *, const char *, unsigned long, unsigned long); void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame) { #ifdef CONFIG_KALLSYMS - printk("[<%08lx>] (%pS) from [<%08lx>] (%pS)\n", where, (void *)where, from, (void *)from); + printk("[<%08lx>] (%ps) from [<%08lx>] (%pS)\n", where, (void *)where, from, (void *)from); #else printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from); #endif diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 47d7338561de..0573faab96ad 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -13,7 +13,7 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \ ucmpdi2.o lib1funcs.o div64.o \ io-readsb.o io-writesb.o io-readsl.o io-writesl.o \ - call_with_stack.o + call_with_stack.o bswapsdi2.o mmu-y := clear_user.o copy_page.o getuser.o putuser.o diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S index cd07b5814c23..4102be617fce 100644 --- a/arch/arm/lib/backtrace.S +++ b/arch/arm/lib/backtrace.S @@ -80,14 +80,14 @@ for_each_frame: tst frame, mask @ Check for address exceptions ldr r1, [sv_pc, #-4] @ if stmfd sp!, {args} exists, ldr r3, .Ldsi+4 - teq r3, r1, lsr #10 + teq r3, r1, lsr #11 ldreq r0, [frame, #-8] @ get sp subeq r0, r0, #4 @ point at the last arg bleq .Ldumpstm @ dump saved registers 1004: ldr r1, [sv_pc, #0] @ if stmfd sp!, {..., fp, ip, lr, pc} ldr r3, .Ldsi @ instruction exists, - teq r3, r1, lsr #10 + teq r3, r1, lsr #11 subeq r0, frame, #16 bleq .Ldumpstm @ dump saved registers @@ -128,11 +128,11 @@ ENDPROC(c_backtrace) beq 2f add r7, r7, #1 teq r7, #6 - moveq r7, #1 - moveq r1, #'\n' - movne r1, #' ' - ldr r3, [stack], #-4 - mov r2, reg + moveq r7, #0 + adr r3, .Lcr + addne r3, r3, #1 @ skip newline + ldr r2, [stack], #-4 + mov r1, reg adr r0, .Lfp bl printk 2: subs reg, reg, #1 @@ -142,11 +142,11 @@ ENDPROC(c_backtrace) blne printk ldmfd sp!, {instr, reg, stack, r7, pc} -.Lfp: .asciz "%cr%d:%08x" +.Lfp: .asciz " r%d:%08x%s" .Lcr: .asciz "\n" .Lbad: .asciz "Backtrace aborted due to bad frame pointer <%p>\n" .align -.Ldsi: .word 0xe92dd800 >> 10 @ stmfd sp!, {... fp, ip, lr, pc} - .word 0xe92d0000 >> 10 @ stmfd sp!, {} +.Ldsi: .word 0xe92dd800 >> 11 @ stmfd sp!, {... fp, ip, lr, pc} + .word 0xe92d0000 >> 11 @ stmfd sp!, {} #endif diff --git a/arch/arm/lib/bswapsdi2.S b/arch/arm/lib/bswapsdi2.S new file mode 100644 index 000000000000..9fcdd154eff9 --- /dev/null +++ b/arch/arm/lib/bswapsdi2.S @@ -0,0 +1,36 @@ +#include <linux/linkage.h> + +#if __LINUX_ARM_ARCH__ >= 6 +ENTRY(__bswapsi2) + rev r0, r0 + bx lr +ENDPROC(__bswapsi2) + +ENTRY(__bswapdi2) + rev r3, r0 + rev r0, r1 + mov r1, r3 + bx lr +ENDPROC(__bswapdi2) +#else +ENTRY(__bswapsi2) + eor r3, r0, r0, ror #16 + mov r3, r3, lsr #8 + bic r3, r3, #0xff00 + eor r0, r3, r0, ror #8 + mov pc, lr +ENDPROC(__bswapsi2) + +ENTRY(__bswapdi2) + mov ip, r1 + eor r3, ip, ip, ror #16 + eor r1, r0, r0, ror #16 + mov r1, r1, lsr #8 + mov r3, r3, lsr #8 + bic r3, r3, #0xff00 + bic r1, r1, #0xff00 + eor r1, r1, r0, ror #8 + eor r0, r3, ip, ror #8 + mov pc, lr +ENDPROC(__bswapdi2) +#endif diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index f607deb40f4d..bc7b363a3083 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -174,7 +174,6 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev) static struct clock_event_device clkevt = { .name = "at91_tick", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, .rating = 150, .set_next_event = clkevt32k_next_event, .set_mode = clkevt32k_mode, @@ -265,11 +264,9 @@ void __init at91rm9200_timer_init(void) at91_st_write(AT91_ST_RTMR, 1); /* Setup timer clockevent, with minimum of two ticks (important!!) */ - clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift); - clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt); - clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1; clkevt.cpumask = cpumask_of(0); - clockevents_register_device(&clkevt); + clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK, + 2, AT91_ST_ALMV); /* register clocksource */ clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK); diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index 3ed190ce062b..c5101dcb4fb0 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -16,7 +16,11 @@ #include <mach/at91_ramc.h> #include <mach/at91rm9200_sdramc.h> +#ifdef CONFIG_PM extern void at91_pm_set_standby(void (*at91_standby)(void)); +#else +static inline void at91_pm_set_standby(void (*at91_standby)(void)) { } +#endif /* * The AT91RM9200 goes into self-refresh mode with this command, and will diff --git a/arch/arm/mach-at91/sama5d3.c b/arch/arm/mach-at91/sama5d3.c index 3ea86428ee09..a28873fe3049 100644 --- a/arch/arm/mach-at91/sama5d3.c +++ b/arch/arm/mach-at91/sama5d3.c @@ -95,19 +95,19 @@ static struct clk twi0_clk = { .name = "twi0_clk", .pid = SAMA5D3_ID_TWI0, .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, + .div = AT91_PMC_PCR_DIV8, }; static struct clk twi1_clk = { .name = "twi1_clk", .pid = SAMA5D3_ID_TWI1, .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, + .div = AT91_PMC_PCR_DIV8, }; static struct clk twi2_clk = { .name = "twi2_clk", .pid = SAMA5D3_ID_TWI2, .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, + .div = AT91_PMC_PCR_DIV8, }; static struct clk mmc0_clk = { .name = "mci0_clk", diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 094b3459c288..2742e00ec5d6 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -81,7 +81,7 @@ void __init at91_init_sram(int bank, unsigned long base, unsigned int length) desc->pfn = __phys_to_pfn(base); desc->length = length; - desc->type = MT_MEMORY_NONCACHED; + desc->type = MT_MEMORY_RWX_NONCACHED; pr_info("AT91: sram at 0x%lx of 0x%x mapped at 0x%lx\n", base, length, desc->virtual); diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index c46eccbbd512..78829c513fdc 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -487,7 +487,7 @@ int __init da8xx_register_emac(void) static struct resource da830_mcasp1_resources[] = { { - .name = "mcasp1", + .name = "mpu", .start = DAVINCI_DA830_MCASP1_REG_BASE, .end = DAVINCI_DA830_MCASP1_REG_BASE + (SZ_1K * 12) - 1, .flags = IORESOURCE_MEM, @@ -515,7 +515,7 @@ static struct platform_device da830_mcasp1_device = { static struct resource da850_mcasp_resources[] = { { - .name = "mcasp", + .name = "mpu", .start = DAVINCI_DA8XX_MCASP0_REG_BASE, .end = DAVINCI_DA8XX_MCASP0_REG_BASE + (SZ_1K * 12) - 1, .flags = IORESOURCE_MEM, diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index ef9ff1fb6f52..6117fc644188 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -641,6 +641,7 @@ static struct platform_device dm355_edma_device = { static struct resource dm355_asp1_resources[] = { { + .name = "mpu", .start = DAVINCI_ASP1_BASE, .end = DAVINCI_ASP1_BASE + SZ_8K - 1, .flags = IORESOURCE_MEM, @@ -906,7 +907,7 @@ static struct davinci_gpio_platform_data dm355_gpio_platform_data = { int __init dm355_gpio_register(void) { return davinci_gpio_register(dm355_gpio_resources, - sizeof(dm355_gpio_resources), + ARRAY_SIZE(dm355_gpio_resources), &dm355_gpio_platform_data); } /*----------------------------------------------------------------------*/ diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 1511a0680f9a..d7c6f85d3fc9 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -720,7 +720,7 @@ static struct davinci_gpio_platform_data dm365_gpio_platform_data = { int __init dm365_gpio_register(void) { return davinci_gpio_register(dm365_gpio_resources, - sizeof(dm365_gpio_resources), + ARRAY_SIZE(dm365_gpio_resources), &dm365_gpio_platform_data); } @@ -942,6 +942,7 @@ static struct platform_device dm365_edma_device = { static struct resource dm365_asp_resources[] = { { + .name = "mpu", .start = DAVINCI_DM365_ASP0_BASE, .end = DAVINCI_DM365_ASP0_BASE + SZ_8K - 1, .flags = IORESOURCE_MEM, diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 143a3217e8ef..3ce47997bb46 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -572,6 +572,7 @@ static struct platform_device dm644x_edma_device = { /* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */ static struct resource dm644x_asp_resources[] = { { + .name = "mpu", .start = DAVINCI_ASP0_BASE, .end = DAVINCI_ASP0_BASE + SZ_8K - 1, .flags = IORESOURCE_MEM, @@ -792,7 +793,7 @@ static struct davinci_gpio_platform_data dm644_gpio_platform_data = { int __init dm644x_gpio_register(void) { return davinci_gpio_register(dm644_gpio_resources, - sizeof(dm644_gpio_resources), + ARRAY_SIZE(dm644_gpio_resources), &dm644_gpio_platform_data); } /*----------------------------------------------------------------------*/ diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 2a73f299c1d0..0e81fea65e7f 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -621,7 +621,7 @@ static struct platform_device dm646x_edma_device = { static struct resource dm646x_mcasp0_resources[] = { { - .name = "mcasp0", + .name = "mpu", .start = DAVINCI_DM646X_MCASP0_REG_BASE, .end = DAVINCI_DM646X_MCASP0_REG_BASE + (SZ_1K << 1) - 1, .flags = IORESOURCE_MEM, @@ -641,7 +641,7 @@ static struct resource dm646x_mcasp0_resources[] = { static struct resource dm646x_mcasp1_resources[] = { { - .name = "mcasp1", + .name = "mpu", .start = DAVINCI_DM646X_MCASP1_REG_BASE, .end = DAVINCI_DM646X_MCASP1_REG_BASE + (SZ_1K << 1) - 1, .flags = IORESOURCE_MEM, @@ -769,7 +769,7 @@ static struct davinci_gpio_platform_data dm646x_gpio_platform_data = { int __init dm646x_gpio_register(void) { return davinci_gpio_register(dm646x_gpio_resources, - sizeof(dm646x_gpio_resources), + ARRAY_SIZE(dm646x_gpio_resources), &dm646x_gpio_platform_data); } /*----------------------------------------------------------------------*/ diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c index e0091685fd48..9e8220e38398 100644 --- a/arch/arm/mach-footbridge/common.c +++ b/arch/arm/mach-footbridge/common.c @@ -143,11 +143,6 @@ static struct map_desc fb_common_io_desc[] __initdata = { .pfn = __phys_to_pfn(DC21285_ARMCSR_BASE), .length = ARMCSR_SIZE, .type = MT_DEVICE, - }, { - .virtual = XBUS_BASE, - .pfn = __phys_to_pfn(0x40000000), - .length = XBUS_SIZE, - .type = MT_DEVICE, } }; diff --git a/arch/arm/mach-footbridge/common.h b/arch/arm/mach-footbridge/common.h index 56607b3a773e..b911e5587ecf 100644 --- a/arch/arm/mach-footbridge/common.h +++ b/arch/arm/mach-footbridge/common.h @@ -10,3 +10,5 @@ extern void footbridge_init_irq(void); extern void isa_init_irq(unsigned int irq); extern void footbridge_restart(enum reboot_mode, const char *); + +extern void footbridge_sched_clock(void); diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c index 782f6c71fa0a..3971104d32d4 100644 --- a/arch/arm/mach-footbridge/dc21285-timer.c +++ b/arch/arm/mach-footbridge/dc21285-timer.c @@ -9,6 +9,7 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/sched_clock.h> #include <asm/irq.h> @@ -46,6 +47,16 @@ static struct clocksource cksrc_dc21285 = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; +static int ckevt_dc21285_set_next_event(unsigned long delta, + struct clock_event_device *c) +{ + *CSR_TIMER1_CLR = 0; + *CSR_TIMER1_LOAD = delta; + *CSR_TIMER1_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_DIV16; + + return 0; +} + static void ckevt_dc21285_set_mode(enum clock_event_mode mode, struct clock_event_device *c) { @@ -58,7 +69,9 @@ static void ckevt_dc21285_set_mode(enum clock_event_mode mode, TIMER_CNTL_DIV16; break; - default: + case CLOCK_EVT_MODE_ONESHOT: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: *CSR_TIMER1_CNTL = 0; break; } @@ -66,9 +79,11 @@ static void ckevt_dc21285_set_mode(enum clock_event_mode mode, static struct clock_event_device ckevt_dc21285 = { .name = "dc21285_timer1", - .features = CLOCK_EVT_FEAT_PERIODIC, + .features = CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_ONESHOT, .rating = 200, .irq = IRQ_TIMER1, + .set_next_event = ckevt_dc21285_set_next_event, .set_mode = ckevt_dc21285_set_mode, }; @@ -78,6 +93,10 @@ static irqreturn_t timer1_interrupt(int irq, void *dev_id) *CSR_TIMER1_CLR = 0; + /* Stop the timer if in one-shot mode */ + if (ce->mode == CLOCK_EVT_MODE_ONESHOT) + *CSR_TIMER1_CNTL = 0; + ce->event_handler(ce); return IRQ_HANDLED; @@ -105,3 +124,19 @@ void __init footbridge_timer_init(void) ce->cpumask = cpumask_of(smp_processor_id()); clockevents_config_and_register(ce, rate, 0x4, 0xffffff); } + +static u32 notrace footbridge_read_sched_clock(void) +{ + return ~*CSR_TIMER3_VALUE; +} + +void __init footbridge_sched_clock(void) +{ + unsigned rate = DIV_ROUND_CLOSEST(mem_fclk_21285, 16); + + *CSR_TIMER3_LOAD = 0; + *CSR_TIMER3_CLR = 0; + *CSR_TIMER3_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_DIV16; + + setup_sched_clock(footbridge_read_sched_clock, 24, rate); +} diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c index 1a7235fb52ac..aee8300f3490 100644 --- a/arch/arm/mach-footbridge/ebsa285.c +++ b/arch/arm/mach-footbridge/ebsa285.c @@ -4,6 +4,7 @@ * EBSA285 machine fixup */ #include <linux/init.h> +#include <linux/io.h> #include <linux/spinlock.h> #include <linux/slab.h> #include <linux/leds.h> @@ -17,6 +18,11 @@ /* LEDs */ #if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS) +#define XBUS_AMBER_L BIT(0) +#define XBUS_GREEN_L BIT(1) +#define XBUS_RED_L BIT(2) +#define XBUS_TOGGLE BIT(7) + struct ebsa285_led { struct led_classdev cdev; u8 mask; @@ -36,6 +42,7 @@ static const struct { }; static unsigned char hw_led_state; +static void __iomem *xbus; static void ebsa285_led_set(struct led_classdev *cdev, enum led_brightness b) @@ -47,7 +54,7 @@ static void ebsa285_led_set(struct led_classdev *cdev, hw_led_state |= led->mask; else hw_led_state &= ~led->mask; - *XBUS_LEDS = hw_led_state; + writeb(hw_led_state, xbus); } static enum led_brightness ebsa285_led_get(struct led_classdev *cdev) @@ -65,9 +72,13 @@ static int __init ebsa285_leds_init(void) if (!machine_is_ebsa285()) return -ENODEV; + xbus = ioremap(XBUS_CS2, SZ_4K); + if (!xbus) + return -ENOMEM; + /* 3 LEDS all off */ - hw_led_state = XBUS_LED_AMBER | XBUS_LED_GREEN | XBUS_LED_RED; - *XBUS_LEDS = hw_led_state; + hw_led_state = XBUS_AMBER_L | XBUS_GREEN_L | XBUS_RED_L; + writeb(hw_led_state, xbus); for (i = 0; i < ARRAY_SIZE(ebsa285_leds); i++) { struct ebsa285_led *led; @@ -104,6 +115,7 @@ MACHINE_START(EBSA285, "EBSA285") .video_start = 0x000a0000, .video_end = 0x000bffff, .map_io = footbridge_map_io, + .init_early = footbridge_sched_clock, .init_irq = footbridge_init_irq, .init_time = footbridge_timer_init, .restart = footbridge_restart, diff --git a/arch/arm/mach-footbridge/include/mach/hardware.h b/arch/arm/mach-footbridge/include/mach/hardware.h index e3d6ccac2162..02f6d7a706b1 100644 --- a/arch/arm/mach-footbridge/include/mach/hardware.h +++ b/arch/arm/mach-footbridge/include/mach/hardware.h @@ -51,11 +51,7 @@ #define PCIMEM_SIZE 0x01000000 #define PCIMEM_BASE MMU_IO(0xf0000000, 0x80000000) -#define XBUS_LEDS ((volatile unsigned char *)(XBUS_BASE + 0x12000)) -#define XBUS_LED_AMBER (1 << 0) -#define XBUS_LED_GREEN (1 << 1) -#define XBUS_LED_RED (1 << 2) -#define XBUS_LED_TOGGLE (1 << 8) +#define XBUS_CS2 0x40012000 #define XBUS_SWITCH ((volatile unsigned char *)(XBUS_BASE + 0x12000)) #define XBUS_SWITCH_SWITCH ((*XBUS_SWITCH) & 15) diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index ae171506cb06..c7de89b263dd 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -17,12 +17,15 @@ #include <linux/clkdev.h> #include <linux/clocksource.h> #include <linux/dma-mapping.h> +#include <linux/input.h> #include <linux/io.h> #include <linux/irqchip.h> +#include <linux/mailbox.h> #include <linux/of.h> #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/of_address.h> +#include <linux/reboot.h> #include <linux/amba/bus.h> #include <linux/platform_device.h> @@ -131,6 +134,24 @@ static struct platform_device highbank_cpuidle_device = { .name = "cpuidle-calxeda", }; +static int hb_keys_notifier(struct notifier_block *nb, unsigned long event, void *data) +{ + u32 key = *(u32 *)data; + + if (event != 0x1000) + return 0; + + if (key == KEY_POWER) + orderly_poweroff(false); + else if (key == 0xffff) + ctrl_alt_del(); + + return 0; +} +static struct notifier_block hb_keys_nb = { + .notifier_call = hb_keys_notifier, +}; + static void __init highbank_init(void) { struct device_node *np; @@ -146,6 +167,8 @@ static void __init highbank_init(void) bus_register_notifier(&platform_bus_type, &highbank_platform_nb); bus_register_notifier(&amba_bustype, &highbank_amba_nb); + pl320_ipc_register_notifier(&hb_keys_nb); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); if (psci_ops.cpu_suspend) diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 7a6e6f710068..fae0578fec7e 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -3,7 +3,6 @@ config ARCH_MXC select ARCH_REQUIRE_GPIOLIB select ARM_CPU_SUSPEND if PM select ARM_PATCH_PHYS_VIRT - select AUTO_ZRELADDR if !ZBOOT_ROM select CLKSRC_MMIO select COMMON_CLK select GENERIC_ALLOCATOR diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 1f25f3e99c05..adcef406ff0a 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -19,11 +19,11 @@ secure-common = omap-smc.o omap-secure.o obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common) -obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common) +obj-$(CONFIG_ARCH_OMAP4) += $(hwmod-common) $(secure-common) obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common) -obj-$(CONFIG_SOC_OMAP5) += prm44xx.o $(hwmod-common) $(secure-common) +obj-$(CONFIG_SOC_OMAP5) += $(hwmod-common) $(secure-common) obj-$(CONFIG_SOC_AM43XX) += $(hwmod-common) $(secure-common) -obj-$(CONFIG_SOC_DRA7XX) += prm44xx.o $(hwmod-common) $(secure-common) +obj-$(CONFIG_SOC_DRA7XX) += $(hwmod-common) $(secure-common) ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),) obj-y += mcbsp.o diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 19f1652e94cf..8d972ff18c56 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -131,6 +131,24 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)") .dt_compat = omap3_gp_boards_compat, .restart = omap3xxx_restart, MACHINE_END + +static const char *am3517_boards_compat[] __initdata = { + "ti,am3517", + NULL, +}; + +DT_MACHINE_START(AM3517_DT, "Generic AM3517 (Flattened Device Tree)") + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = am35xx_init_early, + .init_irq = omap_intc_of_init, + .handle_irq = omap3_intc_handle_irq, + .init_machine = omap_generic_init, + .init_late = omap3_init_late, + .init_time = omap3_gptimer_timer_init, + .dt_compat = am3517_boards_compat, + .restart = omap3xxx_restart, +MACHINE_END #endif #ifdef CONFIG_SOC_AM33XX diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 4ec8d82b0492..44a59c3abfb0 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -242,12 +242,18 @@ static void __init ldp_display_init(void) static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { + int res; + /* LCD enable GPIO */ ldp_lcd_pdata.enable_gpio = gpio + 7; /* Backlight enable GPIO */ ldp_lcd_pdata.backlight_gpio = gpio + 15; + res = platform_device_register(&ldp_lcd_device); + if (res) + pr_err("Unable to register LCD: %d\n", res); + return 0; } @@ -346,7 +352,6 @@ static struct omap2_hsmmc_info mmc[] __initdata = { static struct platform_device *ldp_devices[] __initdata = { &ldp_gpio_keys_device, - &ldp_lcd_device, }; #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index f7644febee81..e30ef6797c63 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -299,7 +299,6 @@ struct omap_sdrc_params; extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0, struct omap_sdrc_params *sdrc_cs1); struct omap2_hsmmc_info; -extern int omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers); extern void omap_reserve(void); struct omap_hwmod; diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index a4e536b11ec9..4cf165502b35 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -32,7 +32,6 @@ #include "soc.h" #include "iomap.h" -#include "mux.h" #include "control.h" #include "display.h" #include "prm.h" @@ -102,35 +101,6 @@ static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initconst = { { "dss_hdmi", "omapdss_hdmi", -1 }, }; -static void __init omap4_tpd12s015_mux_pads(void) -{ - omap_mux_init_signal("hdmi_cec", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("hdmi_ddc_scl", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("hdmi_ddc_sda", - OMAP_PIN_INPUT_PULLUP); -} - -static void __init omap4_hdmi_mux_pads(enum omap_hdmi_flags flags) -{ - u32 reg; - u16 control_i2c_1; - - /* - * CONTROL_I2C_1: HDMI_DDC_SDA_PULLUPRESX (bit 28) and - * HDMI_DDC_SCL_PULLUPRESX (bit 24) are set to disable - * internal pull up resistor. - */ - if (flags & OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP) { - control_i2c_1 = OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1; - reg = omap4_ctrl_pad_readl(control_i2c_1); - reg |= (OMAP4_HDMI_DDC_SDA_PULLUPRESX_MASK | - OMAP4_HDMI_DDC_SCL_PULLUPRESX_MASK); - omap4_ctrl_pad_writel(reg, control_i2c_1); - } -} - static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes) { u32 enable_mask, enable_shift; @@ -164,16 +134,6 @@ static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes) return 0; } -int __init omap_hdmi_init(enum omap_hdmi_flags flags) -{ - if (cpu_is_omap44xx()) { - omap4_hdmi_mux_pads(flags); - omap4_tpd12s015_mux_pads(); - } - - return 0; -} - static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask) { if (cpu_is_omap44xx()) diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c index 365bfd3d9c68..dadccc91488c 100644 --- a/arch/arm/mach-omap2/dss-common.c +++ b/arch/arm/mach-omap2/dss-common.c @@ -223,7 +223,7 @@ void __init omap_4430sdp_display_init_of(void) static struct connector_dvi_platform_data omap3_igep2_dvi_connector_pdata = { .name = "dvi", .source = "tfp410.0", - .i2c_bus_num = 3, + .i2c_bus_num = 2, }; static struct platform_device omap3_igep2_dvi_connector_device = { diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 81de56251955..d24926e6340f 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -1502,6 +1502,22 @@ static int gpmc_probe_generic_child(struct platform_device *pdev, } /* + * For some GPMC devices we still need to rely on the bootloader + * timings because the devices can be connected via FPGA. So far + * the list is smc91x on the omap2 SDP boards, and 8250 on zooms. + * REVISIT: Add timing support from slls644g.pdf and from the + * lan91c96 manual. + */ + if (of_device_is_compatible(child, "ns16550a") || + of_device_is_compatible(child, "smsc,lan91c94") || + of_device_is_compatible(child, "smsc,lan91c111")) { + dev_warn(&pdev->dev, + "%s using bootloader timings on CS%d\n", + child->name, cs); + goto no_timings; + } + + /* * FIXME: gpmc_cs_request() will map the CS to an arbitary * location in the gpmc address space. When booting with * device-tree we want the NOR flash to be mapped to the @@ -1529,6 +1545,7 @@ static int gpmc_probe_generic_child(struct platform_device *pdev, gpmc_read_timings_dt(child, &gpmc_t); gpmc_cs_set_timings(cs, &gpmc_t); +no_timings: if (of_platform_device_create(child, NULL, &pdev->dev)) return 0; @@ -1541,42 +1558,6 @@ err: return ret; } -/* - * REVISIT: Add timing support from slls644g.pdf - */ -static int gpmc_probe_8250(struct platform_device *pdev, - struct device_node *child) -{ - struct resource res; - unsigned long base; - int ret, cs; - - if (of_property_read_u32(child, "reg", &cs) < 0) { - dev_err(&pdev->dev, "%s has no 'reg' property\n", - child->full_name); - return -ENODEV; - } - - if (of_address_to_resource(child, 0, &res) < 0) { - dev_err(&pdev->dev, "%s has malformed 'reg' property\n", - child->full_name); - return -ENODEV; - } - - ret = gpmc_cs_request(cs, resource_size(&res), &base); - if (ret < 0) { - dev_err(&pdev->dev, "cannot request GPMC CS %d\n", cs); - return ret; - } - - if (of_platform_device_create(child, NULL, &pdev->dev)) - return 0; - - dev_err(&pdev->dev, "failed to create gpmc child %s\n", child->name); - - return -ENODEV; -} - static int gpmc_probe_dt(struct platform_device *pdev) { int ret; @@ -1618,10 +1599,9 @@ static int gpmc_probe_dt(struct platform_device *pdev) else if (of_node_cmp(child->name, "onenand") == 0) ret = gpmc_probe_onenand_child(pdev, child); else if (of_node_cmp(child->name, "ethernet") == 0 || - of_node_cmp(child->name, "nor") == 0) + of_node_cmp(child->name, "nor") == 0 || + of_node_cmp(child->name, "uart") == 0) ret = gpmc_probe_generic_child(pdev, child); - else if (of_node_cmp(child->name, "8250") == 0) - ret = gpmc_probe_8250(pdev, child); if (WARN(ret < 0, "%s: probing gpmc child %s failed\n", __func__, child->full_name)) diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index cd22262a2cc0..07b68d5a7940 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -244,7 +244,7 @@ static struct map_desc omap44xx_io_desc[] __initdata = { .virtual = OMAP4_SRAM_VA, .pfn = __phys_to_pfn(OMAP4_SRAM_PA), .length = PAGE_SIZE, - .type = MT_MEMORY_SO, + .type = MT_MEMORY_RW_SO, }, #endif @@ -282,7 +282,7 @@ static struct map_desc omap54xx_io_desc[] __initdata = { .virtual = OMAP4_SRAM_VA, .pfn = __phys_to_pfn(OMAP4_SRAM_PA), .length = PAGE_SIZE, - .type = MT_MEMORY_SO, + .type = MT_MEMORY_RW_SO, }, #endif }; diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h index 8cc7d331437d..3e97c6c8ecf1 100644 --- a/arch/arm/mach-omap2/omap-secure.h +++ b/arch/arm/mach-omap2/omap-secure.h @@ -76,6 +76,13 @@ static inline void omap_barrier_reserve_memblock(void) { } #endif +#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER void set_cntfreq(void); +#else +static inline void set_cntfreq(void) +{ +} +#endif + #endif /* __ASSEMBLER__ */ #endif /* OMAP_ARCH_OMAP_SECURE_H */ diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 3f44b162fcab..dd893ec4c8f2 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -35,7 +35,6 @@ #include "iomap.h" #include "common.h" #include "mmc.h" -#include "hsmmc.h" #include "prminst44xx.h" #include "prcm_mpu44xx.h" #include "omap4-sar-layout.h" @@ -88,7 +87,7 @@ void __init omap_barriers_init(void) dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA; dram_io_desc[0].pfn = __phys_to_pfn(paddr); dram_io_desc[0].length = size; - dram_io_desc[0].type = MT_MEMORY_SO; + dram_io_desc[0].type = MT_MEMORY_RW_SO; iotable_init(dram_io_desc, ARRAY_SIZE(dram_io_desc)); dram_sync = (void __iomem *) dram_io_desc[0].virtual; sram_sync = (void __iomem *) OMAP4_SRAM_VA; @@ -285,59 +284,3 @@ skip_errata_init: omap_wakeupgen_init(); irqchip_init(); } - -#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) -static int omap4_twl6030_hsmmc_late_init(struct device *dev) -{ - int irq = 0; - struct platform_device *pdev = container_of(dev, - struct platform_device, dev); - struct omap_mmc_platform_data *pdata = dev->platform_data; - - /* Setting MMC1 Card detect Irq */ - if (pdev->id == 0) { - irq = twl6030_mmc_card_detect_config(); - if (irq < 0) { - dev_err(dev, "%s: Error card detect config(%d)\n", - __func__, irq); - return irq; - } - pdata->slots[0].card_detect_irq = irq; - pdata->slots[0].card_detect = twl6030_mmc_card_detect; - } - return 0; -} - -static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev) -{ - struct omap_mmc_platform_data *pdata; - - /* dev can be null if CONFIG_MMC_OMAP_HS is not set */ - if (!dev) { - pr_err("Failed %s\n", __func__); - return; - } - pdata = dev->platform_data; - pdata->init = omap4_twl6030_hsmmc_late_init; -} - -int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) -{ - struct omap2_hsmmc_info *c; - - omap_hsmmc_init(controllers); - for (c = controllers; c->mmc; c++) { - /* pdev can be null if CONFIG_MMC_OMAP_HS is not set */ - if (!c->pdev) - continue; - omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev); - } - - return 0; -} -#else -int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) -{ - return 0; -} -#endif diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 53f0735817bb..e0a398cf28d8 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -183,6 +183,10 @@ static int omap_device_build_from_dt(struct platform_device *pdev) odbfd_exit1: kfree(hwmods); odbfd_exit: + /* if data/we are at fault.. load up a fail handler */ + if (ret) + pdev->dev.pm_domain = &omap_device_fail_pm_domain; + return ret; } @@ -604,6 +608,19 @@ static int _od_runtime_resume(struct device *dev) return pm_generic_runtime_resume(dev); } + +static int _od_fail_runtime_suspend(struct device *dev) +{ + dev_warn(dev, "%s: FIXME: missing hwmod/omap_dev info\n", __func__); + return -ENODEV; +} + +static int _od_fail_runtime_resume(struct device *dev) +{ + dev_warn(dev, "%s: FIXME: missing hwmod/omap_dev info\n", __func__); + return -ENODEV; +} + #endif #ifdef CONFIG_SUSPEND @@ -657,6 +674,13 @@ static int _od_resume_noirq(struct device *dev) #define _od_resume_noirq NULL #endif +struct dev_pm_domain omap_device_fail_pm_domain = { + .ops = { + SET_RUNTIME_PM_OPS(_od_fail_runtime_suspend, + _od_fail_runtime_resume, NULL) + } +}; + struct dev_pm_domain omap_device_pm_domain = { .ops = { SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume, diff --git a/arch/arm/mach-omap2/omap_device.h b/arch/arm/mach-omap2/omap_device.h index 17ca1aec2710..78c02b355179 100644 --- a/arch/arm/mach-omap2/omap_device.h +++ b/arch/arm/mach-omap2/omap_device.h @@ -29,6 +29,7 @@ #include "omap_hwmod.h" extern struct dev_pm_domain omap_device_pm_domain; +extern struct dev_pm_domain omap_device_fail_pm_domain; /* omap_device._state values */ #define OMAP_DEVICE_STATE_UNKNOWN 0 diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index e3f0ecaf87dd..8a1b5e0bad40 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -399,7 +399,7 @@ static int _set_clockactivity(struct omap_hwmod *oh, u8 clockact, u32 *v) } /** - * _set_softreset: set OCP_SYSCONFIG.CLOCKACTIVITY bits in @v + * _set_softreset: set OCP_SYSCONFIG.SOFTRESET bit in @v * @oh: struct omap_hwmod * * @v: pointer to register contents to modify * @@ -427,6 +427,36 @@ static int _set_softreset(struct omap_hwmod *oh, u32 *v) } /** + * _clear_softreset: clear OCP_SYSCONFIG.SOFTRESET bit in @v + * @oh: struct omap_hwmod * + * @v: pointer to register contents to modify + * + * Clear the SOFTRESET bit in @v for hwmod @oh. Returns -EINVAL upon + * error or 0 upon success. + */ +static int _clear_softreset(struct omap_hwmod *oh, u32 *v) +{ + u32 softrst_mask; + + if (!oh->class->sysc || + !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET)) + return -EINVAL; + + if (!oh->class->sysc->sysc_fields) { + WARN(1, + "omap_hwmod: %s: sysc_fields absent for sysconfig class\n", + oh->name); + return -EINVAL; + } + + softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift); + + *v &= ~softrst_mask; + + return 0; +} + +/** * _wait_softreset_complete - wait for an OCP softreset to complete * @oh: struct omap_hwmod * to wait on * @@ -785,6 +815,7 @@ static int _init_interface_clks(struct omap_hwmod *oh) pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n", oh->name, os->clk); ret = -EINVAL; + continue; } os->_clk = c; /* @@ -821,6 +852,7 @@ static int _init_opt_clks(struct omap_hwmod *oh) pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n", oh->name, oc->clk); ret = -EINVAL; + continue; } oc->_clk = c; /* @@ -1911,6 +1943,12 @@ static int _ocp_softreset(struct omap_hwmod *oh) ret = _set_softreset(oh, &v); if (ret) goto dis_opt_clks; + + _write_sysconfig(v, oh); + ret = _clear_softreset(oh, &v); + if (ret) + goto dis_opt_clks; + _write_sysconfig(v, oh); if (oh->class->sysc->srst_udelay) @@ -2326,38 +2364,80 @@ static int _shutdown(struct omap_hwmod *oh) return 0; } +static int of_dev_find_hwmod(struct device_node *np, + struct omap_hwmod *oh) +{ + int count, i, res; + const char *p; + + count = of_property_count_strings(np, "ti,hwmods"); + if (count < 1) + return -ENODEV; + + for (i = 0; i < count; i++) { + res = of_property_read_string_index(np, "ti,hwmods", + i, &p); + if (res) + continue; + if (!strcmp(p, oh->name)) { + pr_debug("omap_hwmod: dt %s[%i] uses hwmod %s\n", + np->name, i, oh->name); + return i; + } + } + + return -ENODEV; +} + /** * of_dev_hwmod_lookup - look up needed hwmod from dt blob * @np: struct device_node * * @oh: struct omap_hwmod * + * @index: index of the entry found + * @found: struct device_node * found or NULL * * Parse the dt blob and find out needed hwmod. Recursive function is * implemented to take care hierarchical dt blob parsing. - * Return: The device node on success or NULL on failure. + * Return: Returns 0 on success, -ENODEV when not found. */ -static struct device_node *of_dev_hwmod_lookup(struct device_node *np, - struct omap_hwmod *oh) +static int of_dev_hwmod_lookup(struct device_node *np, + struct omap_hwmod *oh, + int *index, + struct device_node **found) { - struct device_node *np0 = NULL, *np1 = NULL; - const char *p; + struct device_node *np0 = NULL; + int res; + + res = of_dev_find_hwmod(np, oh); + if (res >= 0) { + *found = np; + *index = res; + return 0; + } for_each_child_of_node(np, np0) { - if (of_find_property(np0, "ti,hwmods", NULL)) { - p = of_get_property(np0, "ti,hwmods", NULL); - if (!strcmp(p, oh->name)) - return np0; - np1 = of_dev_hwmod_lookup(np0, oh); - if (np1) - return np1; + struct device_node *fc; + int i; + + res = of_dev_hwmod_lookup(np0, oh, &i, &fc); + if (res == 0) { + *found = fc; + *index = i; + return 0; } } - return NULL; + + *found = NULL; + *index = 0; + + return -ENODEV; } /** * _init_mpu_rt_base - populate the virtual address for a hwmod * @oh: struct omap_hwmod * to locate the virtual address * @data: (unused, caller should pass NULL) + * @index: index of the reg entry iospace in device tree * @np: struct device_node * of the IP block's device node in the DT data * * Cache the virtual address used by the MPU to access this IP block's @@ -2368,7 +2448,7 @@ static struct device_node *of_dev_hwmod_lookup(struct device_node *np, * -ENXIO on absent or invalid register target address space. */ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data, - struct device_node *np) + int index, struct device_node *np) { struct omap_hwmod_addr_space *mem; void __iomem *va_start = NULL; @@ -2390,13 +2470,17 @@ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data, if (!np) return -ENXIO; - va_start = of_iomap(np, oh->mpu_rt_idx); + va_start = of_iomap(np, index + oh->mpu_rt_idx); } else { va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start); } if (!va_start) { - pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name); + if (mem) + pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name); + else + pr_err("omap_hwmod: %s: Missing dt reg%i for %s\n", + oh->name, index, np->full_name); return -ENXIO; } @@ -2422,17 +2506,29 @@ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data, */ static int __init _init(struct omap_hwmod *oh, void *data) { - int r; + int r, index; struct device_node *np = NULL; if (oh->_state != _HWMOD_STATE_REGISTERED) return 0; - if (of_have_populated_dt()) - np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh); + if (of_have_populated_dt()) { + struct device_node *bus; + + bus = of_find_node_by_name(NULL, "ocp"); + if (!bus) + return -ENODEV; + + r = of_dev_hwmod_lookup(bus, oh, &index, &np); + if (r) + pr_debug("omap_hwmod: %s missing dt data\n", oh->name); + else if (np && index) + pr_warn("omap_hwmod: %s using broken dt data from %s\n", + oh->name, np->name); + } if (oh->class->sysc) { - r = _init_mpu_rt_base(oh, NULL, np); + r = _init_mpu_rt_base(oh, NULL, index, np); if (r < 0) { WARN(1, "omap_hwmod: %s: doesn't have mpu register target base\n", oh->name); @@ -3169,6 +3265,11 @@ int omap_hwmod_softreset(struct omap_hwmod *oh) goto error; _write_sysconfig(v, oh); + ret = _clear_softreset(oh, &v); + if (ret) + goto error; + _write_sysconfig(v, oh); + error: return ret; } diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index 56cebb05509e..d23c77fadb31 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -796,7 +796,7 @@ struct omap_hwmod omap2xxx_counter_32k_hwmod = { /* gpmc */ static struct omap_hwmod_irq_info omap2xxx_gpmc_irqs[] = { - { .irq = 20 }, + { .irq = 20 + OMAP_INTC_START, }, { .irq = -1 } }; @@ -841,7 +841,7 @@ static struct omap_hwmod_class omap2_rng_hwmod_class = { }; static struct omap_hwmod_irq_info omap2_rng_mpu_irqs[] = { - { .irq = 52 }, + { .irq = 52 + OMAP_INTC_START, }, { .irq = -1 } }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 9e56fabd7fa3..4c3b1e6df508 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1943,7 +1943,8 @@ static struct omap_hwmod_class_sysconfig omap3xxx_usb_host_hs_sysc = { .syss_offs = 0x0014, .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP | - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | + SYSS_HAS_RESET_STATUS), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), .sysc_fields = &omap_hwmod_sysc_type1, @@ -2021,15 +2022,7 @@ static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = { * hence HWMOD_SWSUP_MSTANDBY */ - /* - * During system boot; If the hwmod framework resets the module - * the module will have smart idle settings; which can lead to deadlock - * (above Errata Id:i660); so, dont reset the module during boot; - * Use HWMOD_INIT_NO_RESET. - */ - - .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY | - HWMOD_INIT_NO_RESET, + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, }; /* @@ -2172,7 +2165,7 @@ static struct omap_hwmod_class omap3xxx_gpmc_hwmod_class = { }; static struct omap_hwmod_irq_info omap3xxx_gpmc_irqs[] = { - { .irq = 20 }, + { .irq = 20 + OMAP_INTC_START, }, { .irq = -1 } }; @@ -3006,7 +2999,7 @@ static struct omap_mmu_dev_attr mmu_isp_dev_attr = { static struct omap_hwmod omap3xxx_mmu_isp_hwmod; static struct omap_hwmod_irq_info omap3xxx_mmu_isp_irqs[] = { - { .irq = 24 }, + { .irq = 24 + OMAP_INTC_START, }, { .irq = -1 } }; @@ -3048,7 +3041,7 @@ static struct omap_mmu_dev_attr mmu_iva_dev_attr = { static struct omap_hwmod omap3xxx_mmu_iva_hwmod; static struct omap_hwmod_irq_info omap3xxx_mmu_iva_irqs[] = { - { .irq = 28 }, + { .irq = 28 + OMAP_INTC_START, }, { .irq = -1 } }; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 1e5b12cb8246..3318cae96e7d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2937,7 +2937,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_usb_host_hs_sysc = { .sysc_offs = 0x0010, .syss_offs = 0x0014, .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET), + SYSC_HAS_SOFTRESET | SYSC_HAS_RESET_STATUS), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART | MSTANDBY_SMART_WKUP), @@ -3001,15 +3001,7 @@ static struct omap_hwmod omap44xx_usb_host_hs_hwmod = { * hence HWMOD_SWSUP_MSTANDBY */ - /* - * During system boot; If the hwmod framework resets the module - * the module will have smart idle settings; which can lead to deadlock - * (above Errata Id:i660); so, dont reset the module during boot; - * Use HWMOD_INIT_NO_RESET. - */ - - .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY | - HWMOD_INIT_NO_RESET, + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, }; /* diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index 9e08d6994a0b..e297d6231c3a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -1544,7 +1544,8 @@ static struct omap_hwmod_class_sysconfig omap54xx_usb_host_hs_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSC_HAS_RESET_STATUS), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART | MSTANDBY_SMART_WKUP), @@ -1598,15 +1599,7 @@ static struct omap_hwmod omap54xx_usb_host_hs_hwmod = { * hence HWMOD_SWSUP_MSTANDBY */ - /* - * During system boot; If the hwmod framework resets the module - * the module will have smart idle settings; which can lead to deadlock - * (above Errata Id:i660); so, dont reset the module during boot; - * Use HWMOD_INIT_NO_RESET. - */ - - .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY | - HWMOD_INIT_NO_RESET, + .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, .main_clk = "l3init_60m_fclk", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index db32d5380b11..18f333c440db 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -1637,7 +1637,7 @@ static struct omap_hwmod dra7xx_uart1_hwmod = { .class = &dra7xx_uart_hwmod_class, .clkdm_name = "l4per_clkdm", .main_clk = "uart1_gfclk_mux", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = HWMOD_SWSUP_SIDLE_ACT | DEBUG_OMAP2UART1_FLAGS, .prcm = { .omap4 = { .clkctrl_offs = DRA7XX_CM_L4PER_UART1_CLKCTRL_OFFSET, diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 10c71450cf63..39f020c982e8 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -139,6 +139,7 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { static struct pdata_init pdata_quirks[] __initdata = { #ifdef CONFIG_ARCH_OMAP3 + { "nokia,omap3-n900", hsmmc2_internal_input_clk, }, { "nokia,omap3-n9", hsmmc2_internal_input_clk, }, { "nokia,omap3-n950", hsmmc2_internal_input_clk, }, { "isee,omap3-igep0020", omap3_igep0020_legacy_init, }, diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 93b80e5da8d4..1f3770a8a728 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -120,7 +120,7 @@ static void omap3_save_secure_ram_context(void) * will hang the system. */ pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON); - ret = _omap_save_secure_sram((u32 *) + ret = _omap_save_secure_sram((u32 *)(unsigned long) __pa(omap3_secure_ram_storage)); pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state); /* Following is for error tracking, it should not happen */ diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index e233dfcbc186..93a2a6e4260f 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -128,7 +128,8 @@ skip_voltdm: for (i = 0; i < pwrdm->banks; i++) pwrdm->ret_mem_off_counter[i] = 0; - arch_pwrdm->pwrdm_wait_transition(pwrdm); + if (arch_pwrdm && arch_pwrdm->pwrdm_wait_transition) + arch_pwrdm->pwrdm_wait_transition(pwrdm); pwrdm->state = pwrdm_read_pwrst(pwrdm); pwrdm->state_counter[pwrdm->state] = 1; diff --git a/arch/arm/mach-omap2/prm44xx_54xx.h b/arch/arm/mach-omap2/prm44xx_54xx.h index 7a976065e138..8d95aa543ef5 100644 --- a/arch/arm/mach-omap2/prm44xx_54xx.h +++ b/arch/arm/mach-omap2/prm44xx_54xx.h @@ -43,7 +43,7 @@ extern void omap4_prm_vcvp_write(u32 val, u8 offset); extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ - defined(CONFIG_SOC_DRA7XX) + defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX) void omap44xx_prm_reconfigure_io_chain(void); #else static inline void omap44xx_prm_reconfigure_io_chain(void) diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h index 2a086e8373eb..958cd6af9384 100644 --- a/arch/arm/mach-pxa/include/mach/lubbock.h +++ b/arch/arm/mach-pxa/include/mach/lubbock.h @@ -10,6 +10,8 @@ * published by the Free Software Foundation. */ +#include <mach/irqs.h> + #define LUBBOCK_ETH_PHYS PXA_CS3_PHYS #define LUBBOCK_FPGA_PHYS PXA_CS2_PHYS diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c index 0d5dd646f61f..263b15249b5b 100644 --- a/arch/arm/mach-pxa/reset.c +++ b/arch/arm/mach-pxa/reset.c @@ -13,6 +13,7 @@ #include <mach/regs-ost.h> #include <mach/reset.h> +#include <mach/smemc.h> unsigned int reset_status; EXPORT_SYMBOL(reset_status); @@ -81,6 +82,12 @@ static void do_hw_reset(void) writel_relaxed(OSSR_M3, OSSR); /* ... in 100 ms */ writel_relaxed(readl_relaxed(OSCR) + 368640, OSMR3); + /* + * SDRAM hangs on watchdog reset on Marvell PXA270 (erratum 71) + * we put SDRAM into self-refresh to prevent that + */ + while (1) + writel_relaxed(MDREFR_SLFRSH, MDREFR); } void pxa_restart(enum reboot_mode mode, const char *cmd) @@ -104,4 +111,3 @@ void pxa_restart(enum reboot_mode mode, const char *cmd) break; } } - diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 0206b915a6f6..ef5557b807ed 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -425,57 +425,57 @@ static struct platform_device tosa_power_device = { * Tosa Keyboard */ static const uint32_t tosakbd_keymap[] = { - KEY(0, 2, KEY_W), - KEY(0, 6, KEY_K), - KEY(0, 7, KEY_BACKSPACE), - KEY(0, 8, KEY_P), - KEY(1, 1, KEY_Q), - KEY(1, 2, KEY_E), - KEY(1, 3, KEY_T), - KEY(1, 4, KEY_Y), - KEY(1, 6, KEY_O), - KEY(1, 7, KEY_I), - KEY(1, 8, KEY_COMMA), - KEY(2, 1, KEY_A), - KEY(2, 2, KEY_D), - KEY(2, 3, KEY_G), - KEY(2, 4, KEY_U), - KEY(2, 6, KEY_L), - KEY(2, 7, KEY_ENTER), - KEY(2, 8, KEY_DOT), - KEY(3, 1, KEY_Z), - KEY(3, 2, KEY_C), - KEY(3, 3, KEY_V), - KEY(3, 4, KEY_J), - KEY(3, 5, TOSA_KEY_ADDRESSBOOK), - KEY(3, 6, TOSA_KEY_CANCEL), - KEY(3, 7, TOSA_KEY_CENTER), - KEY(3, 8, TOSA_KEY_OK), - KEY(3, 9, KEY_LEFTSHIFT), - KEY(4, 1, KEY_S), - KEY(4, 2, KEY_R), - KEY(4, 3, KEY_B), - KEY(4, 4, KEY_N), - KEY(4, 5, TOSA_KEY_CALENDAR), - KEY(4, 6, TOSA_KEY_HOMEPAGE), - KEY(4, 7, KEY_LEFTCTRL), - KEY(4, 8, TOSA_KEY_LIGHT), - KEY(4, 10, KEY_RIGHTSHIFT), - KEY(5, 1, KEY_TAB), - KEY(5, 2, KEY_SLASH), - KEY(5, 3, KEY_H), - KEY(5, 4, KEY_M), - KEY(5, 5, TOSA_KEY_MENU), - KEY(5, 7, KEY_UP), - KEY(5, 11, TOSA_KEY_FN), - KEY(6, 1, KEY_X), - KEY(6, 2, KEY_F), - KEY(6, 3, KEY_SPACE), - KEY(6, 4, KEY_APOSTROPHE), - KEY(6, 5, TOSA_KEY_MAIL), - KEY(6, 6, KEY_LEFT), - KEY(6, 7, KEY_DOWN), - KEY(6, 8, KEY_RIGHT), + KEY(0, 1, KEY_W), + KEY(0, 5, KEY_K), + KEY(0, 6, KEY_BACKSPACE), + KEY(0, 7, KEY_P), + KEY(1, 0, KEY_Q), + KEY(1, 1, KEY_E), + KEY(1, 2, KEY_T), + KEY(1, 3, KEY_Y), + KEY(1, 5, KEY_O), + KEY(1, 6, KEY_I), + KEY(1, 7, KEY_COMMA), + KEY(2, 0, KEY_A), + KEY(2, 1, KEY_D), + KEY(2, 2, KEY_G), + KEY(2, 3, KEY_U), + KEY(2, 5, KEY_L), + KEY(2, 6, KEY_ENTER), + KEY(2, 7, KEY_DOT), + KEY(3, 0, KEY_Z), + KEY(3, 1, KEY_C), + KEY(3, 2, KEY_V), + KEY(3, 3, KEY_J), + KEY(3, 4, TOSA_KEY_ADDRESSBOOK), + KEY(3, 5, TOSA_KEY_CANCEL), + KEY(3, 6, TOSA_KEY_CENTER), + KEY(3, 7, TOSA_KEY_OK), + KEY(3, 8, KEY_LEFTSHIFT), + KEY(4, 0, KEY_S), + KEY(4, 1, KEY_R), + KEY(4, 2, KEY_B), + KEY(4, 3, KEY_N), + KEY(4, 4, TOSA_KEY_CALENDAR), + KEY(4, 5, TOSA_KEY_HOMEPAGE), + KEY(4, 6, KEY_LEFTCTRL), + KEY(4, 7, TOSA_KEY_LIGHT), + KEY(4, 9, KEY_RIGHTSHIFT), + KEY(5, 0, KEY_TAB), + KEY(5, 1, KEY_SLASH), + KEY(5, 2, KEY_H), + KEY(5, 3, KEY_M), + KEY(5, 4, TOSA_KEY_MENU), + KEY(5, 6, KEY_UP), + KEY(5, 10, TOSA_KEY_FN), + KEY(6, 0, KEY_X), + KEY(6, 1, KEY_F), + KEY(6, 2, KEY_SPACE), + KEY(6, 3, KEY_APOSTROPHE), + KEY(6, 4, TOSA_KEY_MAIL), + KEY(6, 5, KEY_LEFT), + KEY(6, 6, KEY_DOWN), + KEY(6, 7, KEY_RIGHT), }; static struct matrix_keymap_data tosakbd_keymap_data = { diff --git a/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c b/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c index 7eb9a10fc1af..2fddf38192df 100644 --- a/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c +++ b/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c @@ -8,8 +8,6 @@ * published by the Free Software Foundation. */ -#include <linux/clk-provider.h> -#include <linux/irqchip.h> #include <linux/of_platform.h> #include <asm/mach/arch.h> @@ -48,15 +46,9 @@ static void __init s3c64xx_dt_map_io(void) panic("SoC is not S3C64xx!"); } -static void __init s3c64xx_dt_init_irq(void) -{ - of_clk_init(NULL); - samsung_wdt_reset_of_init(); - irqchip_init(); -}; - static void __init s3c64xx_dt_init_machine(void) { + samsung_wdt_reset_of_init(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } @@ -79,7 +71,6 @@ DT_MACHINE_START(S3C6400_DT, "Samsung S3C64xx (Flattened Device Tree)") /* Maintainer: Tomasz Figa <tomasz.figa@gmail.com> */ .dt_compat = s3c64xx_dt_compat, .map_io = s3c64xx_dt_map_io, - .init_irq = s3c64xx_dt_init_irq, .init_machine = s3c64xx_dt_init_machine, .restart = s3c64xx_dt_restart, MACHINE_END diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index c9808c684152..8443a27bca2f 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -75,12 +75,143 @@ void ASSABET_BCR_frob(unsigned int mask, unsigned int val) EXPORT_SYMBOL(ASSABET_BCR_frob); +/* + * The codec reset goes to three devices, so we need to release + * the rest when any one of these requests it. However, that + * causes the ADV7171 to consume around 100mA - more than half + * the LCD-blanked power. + * + * With the ADV7171, LCD and backlight enabled, we go over + * budget on the MAX846 Li-Ion charger, and if no Li-Ion battery + * is connected, the Assabet crashes. + */ +#define RST_UCB1X00 (1 << 0) +#define RST_UDA1341 (1 << 1) +#define RST_ADV7171 (1 << 2) + +#define SDA GPIO_GPIO(15) +#define SCK GPIO_GPIO(18) +#define MOD GPIO_GPIO(17) + +static void adv7171_start(void) +{ + GPSR = SCK; + udelay(1); + GPSR = SDA; + udelay(2); + GPCR = SDA; +} + +static void adv7171_stop(void) +{ + GPSR = SCK; + udelay(2); + GPSR = SDA; + udelay(1); +} + +static void adv7171_send(unsigned byte) +{ + unsigned i; + + for (i = 0; i < 8; i++, byte <<= 1) { + GPCR = SCK; + udelay(1); + if (byte & 0x80) + GPSR = SDA; + else + GPCR = SDA; + udelay(1); + GPSR = SCK; + udelay(1); + } + GPCR = SCK; + udelay(1); + GPSR = SDA; + udelay(1); + GPDR &= ~SDA; + GPSR = SCK; + udelay(1); + if (GPLR & SDA) + printk(KERN_WARNING "No ACK from ADV7171\n"); + udelay(1); + GPCR = SCK | SDA; + udelay(1); + GPDR |= SDA; + udelay(1); +} + +static void adv7171_write(unsigned reg, unsigned val) +{ + unsigned gpdr = GPDR; + unsigned gplr = GPLR; + + ASSABET_BCR = BCR_value | ASSABET_BCR_AUDIO_ON; + udelay(100); + + GPCR = SDA | SCK | MOD; /* clear L3 mode to ensure UDA1341 doesn't respond */ + GPDR = (GPDR | SCK | MOD) & ~SDA; + udelay(10); + if (!(GPLR & SDA)) + printk(KERN_WARNING "Something dragging SDA down?\n"); + GPDR |= SDA; + + adv7171_start(); + adv7171_send(0x54); + adv7171_send(reg); + adv7171_send(val); + adv7171_stop(); + + /* Restore GPIO state for L3 bus */ + GPSR = gplr & (SDA | SCK | MOD); + GPCR = (~gplr) & (SDA | SCK | MOD); + GPDR = gpdr; +} + +static void adv7171_sleep(void) +{ + /* Put the ADV7171 into sleep mode */ + adv7171_write(0x04, 0x40); +} + +static unsigned codec_nreset; + +static void assabet_codec_reset(unsigned mask, int set) +{ + unsigned long flags; + bool old; + + local_irq_save(flags); + old = !codec_nreset; + if (set) + codec_nreset &= ~mask; + else + codec_nreset |= mask; + + if (old != !codec_nreset) { + if (codec_nreset) { + ASSABET_BCR_set(ASSABET_BCR_NCODEC_RST); + adv7171_sleep(); + } else { + ASSABET_BCR_clear(ASSABET_BCR_NCODEC_RST); + } + } + local_irq_restore(flags); +} + static void assabet_ucb1x00_reset(enum ucb1x00_reset state) { - if (state == UCB_RST_PROBE) - ASSABET_BCR_set(ASSABET_BCR_CODEC_RST); + int set = state == UCB_RST_REMOVE || state == UCB_RST_SUSPEND || + state == UCB_RST_PROBE_FAIL; + assabet_codec_reset(RST_UCB1X00, set); } +void assabet_uda1341_reset(int set) +{ + assabet_codec_reset(RST_UDA1341, set); +} +EXPORT_SYMBOL(assabet_uda1341_reset); + /* * Assabet flash support code. @@ -155,12 +286,9 @@ static int assabet_irda_set_power(struct device *dev, unsigned int state) 0 }; - if (state < 4) { - state = bcr_state[state]; - ASSABET_BCR_clear(state ^ (ASSABET_BCR_IRDA_MD1| - ASSABET_BCR_IRDA_MD0)); - ASSABET_BCR_set(state); - } + if (state < 4) + ASSABET_BCR_frob(ASSABET_BCR_IRDA_MD1 | ASSABET_BCR_IRDA_MD0, + bcr_state[state]); return 0; } @@ -180,6 +308,7 @@ static struct irda_platform_data assabet_irda_data = { static struct ucb1x00_plat_data assabet_ucb1x00_data = { .reset = assabet_ucb1x00_reset, .gpio_base = -1, + .can_wakeup = 1, }; static struct mcp_plat_data assabet_mcp_data = { diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 7fb96ebdc0fb..831a15824ec8 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -27,6 +27,8 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/timer.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> #include <linux/gpio.h> #include <linux/pda_power.h> @@ -242,10 +244,43 @@ struct platform_device collie_locomo_device = { .resource = locomo_resources, }; +static struct gpio_keys_button collie_gpio_keys[] = { + { + .type = EV_PWR, + .code = KEY_RESERVED, + .gpio = COLLIE_GPIO_ON_KEY, + .desc = "On key", + .wakeup = 1, + .active_low = 1, + }, + { + .type = EV_PWR, + .code = KEY_WAKEUP, + .gpio = COLLIE_GPIO_WAKEUP, + .desc = "Sync", + .wakeup = 1, + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data collie_gpio_keys_data = { + .buttons = collie_gpio_keys, + .nbuttons = ARRAY_SIZE(collie_gpio_keys), +}; + +static struct platform_device collie_gpio_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &collie_gpio_keys_data, + }, +}; + static struct platform_device *devices[] __initdata = { &collie_locomo_device, &colliescoop_device, &collie_power_device, + &collie_gpio_keys_device, }; static struct mtd_partition collie_partitions[] = { diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c index b8f2b151539b..daa27c474c13 100644 --- a/arch/arm/mach-sa1100/h3100.c +++ b/arch/arm/mach-sa1100/h3100.c @@ -28,15 +28,35 @@ /* * helper for sa1100fb */ +static struct gpio h3100_lcd_gpio[] = { + { H3100_GPIO_LCD_3V_ON, GPIOF_OUT_INIT_LOW, "LCD 3V" }, + { H3XXX_EGPIO_LCD_ON, GPIOF_OUT_INIT_LOW, "LCD ON" }, +}; + +static bool h3100_lcd_request(void) +{ + static bool h3100_lcd_ok; + int rc; + + if (h3100_lcd_ok) + return true; + + rc = gpio_request_array(h3100_lcd_gpio, ARRAY_SIZE(h3100_lcd_gpio)); + if (rc) + pr_err("%s: can't request GPIOs\n", __func__); + else + h3100_lcd_ok = true; + + return h3100_lcd_ok; +} + static void h3100_lcd_power(int enable) { - if (!gpio_request(H3XXX_EGPIO_LCD_ON, "LCD ON")) { - gpio_set_value(H3100_GPIO_LCD_3V_ON, enable); - gpio_direction_output(H3XXX_EGPIO_LCD_ON, enable); - gpio_free(H3XXX_EGPIO_LCD_ON); - } else { - pr_err("%s: can't request H3XXX_EGPIO_LCD_ON\n", __func__); - } + if (!h3100_lcd_request()) + return; + + gpio_set_value(H3100_GPIO_LCD_3V_ON, enable); + gpio_set_value(H3XXX_EGPIO_LCD_ON, enable); } static struct sa1100fb_mach_info h3100_lcd_info = { @@ -69,6 +89,11 @@ static void __init h3100_map_io(void) /* * This turns the IRDA power on or off on the Compaq H3100 */ +static struct gpio h3100_irda_gpio[] = { + { H3100_GPIO_IR_ON, GPIOF_OUT_INIT_LOW, "IrDA power" }, + { H3100_GPIO_IR_FSEL, GPIOF_OUT_INIT_LOW, "IrDA fsel" }, +}; + static int h3100_irda_set_power(struct device *dev, unsigned int state) { gpio_set_value(H3100_GPIO_IR_ON, state); @@ -80,18 +105,27 @@ static void h3100_irda_set_speed(struct device *dev, unsigned int speed) gpio_set_value(H3100_GPIO_IR_FSEL, !(speed < 4000000)); } +static int h3100_irda_startup(struct device *dev) +{ + return gpio_request_array(h3100_irda_gpio, sizeof(h3100_irda_gpio)); +} + +static void h3100_irda_shutdown(struct device *dev) +{ + return gpio_free_array(h3100_irda_gpio, sizeof(h3100_irda_gpio)); +} + static struct irda_platform_data h3100_irda_data = { .set_power = h3100_irda_set_power, .set_speed = h3100_irda_set_speed, + .startup = h3100_irda_startup, + .shutdown = h3100_irda_shutdown, }; static struct gpio_default_state h3100_default_gpio[] = { - { H3100_GPIO_IR_ON, GPIO_MODE_OUT0, "IrDA power" }, - { H3100_GPIO_IR_FSEL, GPIO_MODE_OUT0, "IrDA fsel" }, { H3XXX_GPIO_COM_DCD, GPIO_MODE_IN, "COM DCD" }, { H3XXX_GPIO_COM_CTS, GPIO_MODE_IN, "COM CTS" }, { H3XXX_GPIO_COM_RTS, GPIO_MODE_OUT0, "COM RTS" }, - { H3100_GPIO_LCD_3V_ON, GPIO_MODE_OUT0, "LCD 3v" }, }; static void __init h3100_mach_init(void) diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c index b8dc5bd22623..a663e7230141 100644 --- a/arch/arm/mach-sa1100/h3600.c +++ b/arch/arm/mach-sa1100/h3600.c @@ -28,35 +28,39 @@ /* * helper for sa1100fb */ +static struct gpio h3600_lcd_gpio[] = { + { H3XXX_EGPIO_LCD_ON, GPIOF_OUT_INIT_LOW, "LCD power" }, + { H3600_EGPIO_LCD_PCI, GPIOF_OUT_INIT_LOW, "LCD control" }, + { H3600_EGPIO_LCD_5V_ON, GPIOF_OUT_INIT_LOW, "LCD 5v" }, + { H3600_EGPIO_LVDD_ON, GPIOF_OUT_INIT_LOW, "LCD 9v/-6.5v" }, +}; + +static bool h3600_lcd_request(void) +{ + static bool h3600_lcd_ok; + int rc; + + if (h3600_lcd_ok) + return true; + + rc = gpio_request_array(h3600_lcd_gpio, ARRAY_SIZE(h3600_lcd_gpio)); + if (rc) + pr_err("%s: can't request GPIOs\n", __func__); + else + h3600_lcd_ok = true; + + return h3600_lcd_ok; +} + static void h3600_lcd_power(int enable) { - if (gpio_request(H3XXX_EGPIO_LCD_ON, "LCD power")) { - pr_err("%s: can't request H3XXX_EGPIO_LCD_ON\n", __func__); - goto err1; - } - if (gpio_request(H3600_EGPIO_LCD_PCI, "LCD control")) { - pr_err("%s: can't request H3XXX_EGPIO_LCD_PCI\n", __func__); - goto err2; - } - if (gpio_request(H3600_EGPIO_LCD_5V_ON, "LCD 5v")) { - pr_err("%s: can't request H3XXX_EGPIO_LCD_5V_ON\n", __func__); - goto err3; - } - if (gpio_request(H3600_EGPIO_LVDD_ON, "LCD 9v/-6.5v")) { - pr_err("%s: can't request H3600_EGPIO_LVDD_ON\n", __func__); - goto err4; - } + if (!h3600_lcd_request()) + return; gpio_direction_output(H3XXX_EGPIO_LCD_ON, enable); gpio_direction_output(H3600_EGPIO_LCD_PCI, enable); gpio_direction_output(H3600_EGPIO_LCD_5V_ON, enable); gpio_direction_output(H3600_EGPIO_LVDD_ON, enable); - - gpio_free(H3600_EGPIO_LVDD_ON); -err4: gpio_free(H3600_EGPIO_LCD_5V_ON); -err3: gpio_free(H3600_EGPIO_LCD_PCI); -err2: gpio_free(H3XXX_EGPIO_LCD_ON); -err1: return; } static const struct sa1100fb_rgb h3600_rgb_16 = { @@ -93,6 +97,11 @@ static void __init h3600_map_io(void) /* * This turns the IRDA power on or off on the Compaq H3600 */ +static struct gpio h3600_irda_gpio[] = { + { H3600_EGPIO_IR_ON, GPIOF_OUT_INIT_LOW, "IrDA power" }, + { H3600_EGPIO_IR_FSEL, GPIOF_OUT_INIT_LOW, "IrDA fsel" }, +}; + static int h3600_irda_set_power(struct device *dev, unsigned int state) { gpio_set_value(H3600_EGPIO_IR_ON, state); @@ -106,29 +115,12 @@ static void h3600_irda_set_speed(struct device *dev, unsigned int speed) static int h3600_irda_startup(struct device *dev) { - int err = gpio_request(H3600_EGPIO_IR_ON, "IrDA power"); - if (err) - goto err1; - err = gpio_direction_output(H3600_EGPIO_IR_ON, 0); - if (err) - goto err2; - err = gpio_request(H3600_EGPIO_IR_FSEL, "IrDA fsel"); - if (err) - goto err2; - err = gpio_direction_output(H3600_EGPIO_IR_FSEL, 0); - if (err) - goto err3; - return 0; - -err3: gpio_free(H3600_EGPIO_IR_FSEL); -err2: gpio_free(H3600_EGPIO_IR_ON); -err1: return err; + return gpio_request_array(h3600_irda_gpio, sizeof(h3600_irda_gpio)); } static void h3600_irda_shutdown(struct device *dev) { - gpio_free(H3600_EGPIO_IR_ON); - gpio_free(H3600_EGPIO_IR_FSEL); + return gpio_free_array(h3600_irda_gpio, sizeof(h3600_irda_gpio)); } static struct irda_platform_data h3600_irda_data = { diff --git a/arch/arm/mach-sa1100/include/mach/assabet.h b/arch/arm/mach-sa1100/include/mach/assabet.h index 307391488c22..c23fcdb047a5 100644 --- a/arch/arm/mach-sa1100/include/mach/assabet.h +++ b/arch/arm/mach-sa1100/include/mach/assabet.h @@ -39,8 +39,8 @@ extern unsigned long SCR_value; #define ASSABET_BCR_CF_PWR (1<<0) /* Compact Flash Power (1 = 3.3v, 0 = off) */ #define ASSABET_BCR_CF_RST (1<<1) /* Compact Flash Reset (1 = power up reset) */ -#define ASSABET_BCR_GFX_RST (1<<1) /* Graphics Accelerator Reset (0 = hold reset) */ -#define ASSABET_BCR_CODEC_RST (1<<2) /* 0 = Holds UCB1300, ADI7171, and UDA1341 in reset */ +#define ASSABET_BCR_NGFX_RST (1<<1) /* Graphics Accelerator Reset (0 = hold reset) */ +#define ASSABET_BCR_NCODEC_RST (1<<2) /* 0 = Holds UCB1300, ADI7171, and UDA1341 in reset */ #define ASSABET_BCR_IRDA_FSEL (1<<3) /* IRDA Frequency select (0 = SIR, 1 = MIR/ FIR) */ #define ASSABET_BCR_IRDA_MD0 (1<<4) /* Range/Power select */ #define ASSABET_BCR_IRDA_MD1 (1<<5) /* Range/Power select */ @@ -69,6 +69,8 @@ extern void ASSABET_BCR_frob(unsigned int mask, unsigned int set); #define ASSABET_BCR_frob(x,y) do { } while (0) #endif +extern void assabet_uda1341_reset(int set); + #define ASSABET_BCR_set(x) ASSABET_BCR_frob((x), (x)) #define ASSABET_BCR_clear(x) ASSABET_BCR_frob((x), 0) diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 958e3cbf0ac2..c18689123023 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -614,6 +614,11 @@ static struct regulator_consumer_supply fixed3v3_power_consumers[] = { REGULATOR_SUPPLY("vqmmc", "sh_mmcif"), }; +/* Fixed 3.3V regulator used by LCD backlight */ +static struct regulator_consumer_supply fixed5v0_power_consumers[] = { + REGULATOR_SUPPLY("power", "pwm-backlight.0"), +}; + /* Fixed 3.3V regulator to be used by SDHI0 */ static struct regulator_consumer_supply vcc_sdhi0_consumers[] = { REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), @@ -1196,6 +1201,8 @@ static void __init eva_init(void) regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + regulator_register_always_on(3, "fixed-5.0V", fixed5v0_power_consumers, + ARRAY_SIZE(fixed5v0_power_consumers), 5000000); pinctrl_register_mappings(eva_pinctrl_map, ARRAY_SIZE(eva_pinctrl_map)); pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup)); diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c index 38611526fe9a..3c4995aebd22 100644 --- a/arch/arm/mach-shmobile/board-bockw.c +++ b/arch/arm/mach-shmobile/board-bockw.c @@ -679,7 +679,7 @@ static void __init bockw_init(void) .id = i, .data = &rsnd_card_info[i], .size_data = sizeof(struct asoc_simple_card_info), - .dma_mask = ~0, + .dma_mask = DMA_BIT_MASK(32), }; platform_device_register_full(&cardinfo); diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index a8d3ce646fb9..e0406fd37390 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c @@ -245,7 +245,9 @@ static void __init lager_init(void) { lager_add_standard_devices(); - phy_register_fixup_for_id("r8a7790-ether-ff:01", lager_ksz8041_fixup); + if (IS_ENABLED(CONFIG_PHYLIB)) + phy_register_fixup_for_id("r8a7790-ether-ff:01", + lager_ksz8041_fixup); } static const char * const lager_boards_compat_dt[] __initconst = { diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index 037100a1563a..aee77f06f887 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -10,6 +10,7 @@ config ARCH_SOCFPGA select GENERIC_CLOCKEVENTS select GPIO_PL061 if GPIOLIB select HAVE_ARM_SCU + select HAVE_ARM_TWD if SMP select HAVE_SMP select MFD_SYSCON select SPARSE_IRQ diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c index d4639c506622..3a9c1f1c219d 100644 --- a/arch/arm/mach-tegra/fuse.c +++ b/arch/arm/mach-tegra/fuse.c @@ -198,10 +198,12 @@ void __init tegra_init_fuse(void) switch (tegra_chip_id) { case TEGRA20: tegra20_fuse_init_randomness(); + break; case TEGRA30: case TEGRA114: default: tegra30_fuse_init_randomness(); + break; } pr_info("Tegra Revision: %s SKU: %d CPU Process: %d Core Process: %d\n", @@ -209,13 +211,3 @@ void __init tegra_init_fuse(void) tegra_sku_id, tegra_cpu_process_id, tegra_core_process_id); } - -unsigned long long tegra_chip_uid(void) -{ - unsigned long long lo, hi; - - lo = tegra_fuse_readl(FUSE_UID_LOW); - hi = tegra_fuse_readl(FUSE_UID_HIGH); - return (hi << 32ull) | lo; -} -EXPORT_SYMBOL(tegra_chip_uid); diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 2e85c1e72535..12c7e5c03ea4 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -140,6 +140,10 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { /* Requires call-back bindings. */ OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata), /* Requires DMA bindings. */ + OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data), + OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data), + OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data), + OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data), OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000, "ux500-msp-i2s.0", &msp0_platform_data), OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000, diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h index bdb356498a74..b1dd8584bed4 100644 --- a/arch/arm/mach-ux500/setup.h +++ b/arch/arm/mach-ux500/setup.h @@ -43,7 +43,7 @@ extern void ux500_timer_init(void); .virtual = IO_ADDRESS(x), \ .pfn = __phys_to_pfn(x), \ .length = sz, \ - .type = MT_MEMORY, \ + .type = MT_MEMORY_RWX, \ } extern struct smp_operations ux500_smp_ops; diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c index 033d34dcbd3f..c26ef5b92ca7 100644 --- a/arch/arm/mach-vexpress/spc.c +++ b/arch/arm/mach-vexpress/spc.c @@ -53,6 +53,11 @@ #define A15_BX_ADDR0 0x68 #define A7_BX_ADDR0 0x78 +/* SPC CPU/cluster reset statue */ +#define STANDBYWFI_STAT 0x3c +#define STANDBYWFI_STAT_A15_CPU_MASK(cpu) (1 << (cpu)) +#define STANDBYWFI_STAT_A7_CPU_MASK(cpu) (1 << (3 + (cpu))) + /* SPC system config interface registers */ #define SYSCFG_WDATA 0x70 #define SYSCFG_RDATA 0x74 @@ -213,6 +218,41 @@ void ve_spc_powerdown(u32 cluster, bool enable) writel_relaxed(enable, info->baseaddr + pwdrn_reg); } +static u32 standbywfi_cpu_mask(u32 cpu, u32 cluster) +{ + return cluster_is_a15(cluster) ? + STANDBYWFI_STAT_A15_CPU_MASK(cpu) + : STANDBYWFI_STAT_A7_CPU_MASK(cpu); +} + +/** + * ve_spc_cpu_in_wfi(u32 cpu, u32 cluster) + * + * @cpu: mpidr[7:0] bitfield describing CPU affinity level within cluster + * @cluster: mpidr[15:8] bitfield describing cluster affinity level + * + * @return: non-zero if and only if the specified CPU is in WFI + * + * Take care when interpreting the result of this function: a CPU might + * be in WFI temporarily due to idle, and is not necessarily safely + * parked. + */ +int ve_spc_cpu_in_wfi(u32 cpu, u32 cluster) +{ + int ret; + u32 mask = standbywfi_cpu_mask(cpu, cluster); + + if (cluster >= MAX_CLUSTERS) + return 1; + + ret = readl_relaxed(info->baseaddr + STANDBYWFI_STAT); + + pr_debug("%s: PCFGREG[0x%X] = 0x%08X, mask = 0x%X\n", + __func__, STANDBYWFI_STAT, ret, mask); + + return ret & mask; +} + static int ve_spc_get_performance(int cluster, u32 *freq) { struct ve_spc_opp *opps = info->opps[cluster]; diff --git a/arch/arm/mach-vexpress/spc.h b/arch/arm/mach-vexpress/spc.h index dbd44c3720f9..793d065243b9 100644 --- a/arch/arm/mach-vexpress/spc.h +++ b/arch/arm/mach-vexpress/spc.h @@ -20,5 +20,6 @@ void ve_spc_global_wakeup_irq(bool set); void ve_spc_cpu_wakeup_irq(u32 cluster, u32 cpu, bool set); void ve_spc_set_resume_addr(u32 cluster, u32 cpu, u32 addr); void ve_spc_powerdown(u32 cluster, bool enable); +int ve_spc_cpu_in_wfi(u32 cpu, u32 cluster); #endif diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c index 05a364c5077a..29e7785a54bc 100644 --- a/arch/arm/mach-vexpress/tc2_pm.c +++ b/arch/arm/mach-vexpress/tc2_pm.c @@ -12,6 +12,7 @@ * published by the Free Software Foundation. */ +#include <linux/delay.h> #include <linux/init.h> #include <linux/io.h> #include <linux/kernel.h> @@ -32,11 +33,17 @@ #include "spc.h" /* SCC conf registers */ +#define RESET_CTRL 0x018 +#define RESET_A15_NCORERESET(cpu) (1 << (2 + (cpu))) +#define RESET_A7_NCORERESET(cpu) (1 << (16 + (cpu))) + #define A15_CONF 0x400 #define A7_CONF 0x500 #define SYS_INFO 0x700 #define SPC_BASE 0xb00 +static void __iomem *scc; + /* * We can't use regular spinlocks. In the switcher case, it is possible * for an outbound CPU to call power_down() after its inbound counterpart @@ -190,6 +197,55 @@ static void tc2_pm_power_down(void) tc2_pm_down(0); } +static int tc2_core_in_reset(unsigned int cpu, unsigned int cluster) +{ + u32 mask = cluster ? + RESET_A7_NCORERESET(cpu) + : RESET_A15_NCORERESET(cpu); + + return !(readl_relaxed(scc + RESET_CTRL) & mask); +} + +#define POLL_MSEC 10 +#define TIMEOUT_MSEC 1000 + +static int tc2_pm_power_down_finish(unsigned int cpu, unsigned int cluster) +{ + unsigned tries; + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER); + + for (tries = 0; tries < TIMEOUT_MSEC / POLL_MSEC; ++tries) { + /* + * Only examine the hardware state if the target CPU has + * caught up at least as far as tc2_pm_down(): + */ + if (ACCESS_ONCE(tc2_pm_use_count[cpu][cluster]) == 0) { + pr_debug("%s(cpu=%u, cluster=%u): RESET_CTRL = 0x%08X\n", + __func__, cpu, cluster, + readl_relaxed(scc + RESET_CTRL)); + + /* + * We need the CPU to reach WFI, but the power + * controller may put the cluster in reset and + * power it off as soon as that happens, before + * we have a chance to see STANDBYWFI. + * + * So we need to check for both conditions: + */ + if (tc2_core_in_reset(cpu, cluster) || + ve_spc_cpu_in_wfi(cpu, cluster)) + return 0; /* success: the CPU is halted */ + } + + /* Otherwise, wait and retry: */ + msleep(POLL_MSEC); + } + + return -ETIMEDOUT; /* timeout */ +} + static void tc2_pm_suspend(u64 residency) { unsigned int mpidr, cpu, cluster; @@ -232,10 +288,11 @@ static void tc2_pm_powered_up(void) } static const struct mcpm_platform_ops tc2_pm_power_ops = { - .power_up = tc2_pm_power_up, - .power_down = tc2_pm_power_down, - .suspend = tc2_pm_suspend, - .powered_up = tc2_pm_powered_up, + .power_up = tc2_pm_power_up, + .power_down = tc2_pm_power_down, + .power_down_finish = tc2_pm_power_down_finish, + .suspend = tc2_pm_suspend, + .powered_up = tc2_pm_powered_up, }; static bool __init tc2_pm_usage_count_init(void) @@ -269,7 +326,6 @@ static void __naked tc2_pm_power_up_setup(unsigned int affinity_level) static int __init tc2_pm_init(void) { int ret, irq; - void __iomem *scc; u32 a15_cluster_id, a7_cluster_id, sys_info; struct device_node *np; diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index ecfe6e53f6e0..7f39ce2f841f 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -12,6 +12,7 @@ ifneq ($(CONFIG_MMU),y) obj-y += nommu.o endif +obj-$(CONFIG_ARM_PTDUMP) += dump.o obj-$(CONFIG_MODULES) += proc-syms.o obj-$(CONFIG_ALIGNMENT_TRAP) += alignment.o diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 447da6ffadd5..7abde2ce8973 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -25,6 +25,7 @@ #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> +#include "cache-tauros3.h" #include "cache-aurora-l2.h" #define CACHE_LINE_SIZE 32 @@ -767,6 +768,14 @@ static void aurora_save(void) l2x0_saved_regs.aux_ctrl = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); } +static void __init tauros3_save(void) +{ + l2x0_saved_regs.aux2_ctrl = + readl_relaxed(l2x0_base + TAUROS3_AUX2_CTRL); + l2x0_saved_regs.prefetch_ctrl = + readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL); +} + static void l2x0_resume(void) { if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { @@ -821,6 +830,18 @@ static void aurora_resume(void) } } +static void tauros3_resume(void) +{ + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { + writel_relaxed(l2x0_saved_regs.aux2_ctrl, + l2x0_base + TAUROS3_AUX2_CTRL); + writel_relaxed(l2x0_saved_regs.prefetch_ctrl, + l2x0_base + L2X0_PREFETCH_CTRL); + } + + l2x0_resume(); +} + static void __init aurora_broadcast_l2_commands(void) { __u32 u; @@ -906,6 +927,15 @@ static const struct l2x0_of_data aurora_no_outer_data = { }, }; +static const struct l2x0_of_data tauros3_data = { + .setup = NULL, + .save = tauros3_save, + /* Tauros3 broadcasts L1 cache operations to L2 */ + .outer_cache = { + .resume = tauros3_resume, + }, +}; + static const struct l2x0_of_data bcm_l2x0_data = { .setup = pl310_of_setup, .save = pl310_save, @@ -922,17 +952,19 @@ static const struct l2x0_of_data bcm_l2x0_data = { }; static const struct of_device_id l2x0_ids[] __initconst = { - { .compatible = "arm,pl310-cache", .data = (void *)&pl310_data }, - { .compatible = "arm,l220-cache", .data = (void *)&l2x0_data }, { .compatible = "arm,l210-cache", .data = (void *)&l2x0_data }, - { .compatible = "marvell,aurora-system-cache", - .data = (void *)&aurora_no_outer_data}, - { .compatible = "marvell,aurora-outer-cache", - .data = (void *)&aurora_with_outer_data}, - { .compatible = "brcm,bcm11351-a2-pl310-cache", - .data = (void *)&bcm_l2x0_data}, + { .compatible = "arm,l220-cache", .data = (void *)&l2x0_data }, + { .compatible = "arm,pl310-cache", .data = (void *)&pl310_data }, { .compatible = "bcm,bcm11351-a2-pl310-cache", /* deprecated name */ .data = (void *)&bcm_l2x0_data}, + { .compatible = "brcm,bcm11351-a2-pl310-cache", + .data = (void *)&bcm_l2x0_data}, + { .compatible = "marvell,aurora-outer-cache", + .data = (void *)&aurora_with_outer_data}, + { .compatible = "marvell,aurora-system-cache", + .data = (void *)&aurora_no_outer_data}, + { .compatible = "marvell,tauros3-cache", + .data = (void *)&tauros3_data }, {} }; diff --git a/arch/arm/mm/cache-tauros3.h b/arch/arm/mm/cache-tauros3.h new file mode 100644 index 000000000000..02c0a97cbc02 --- /dev/null +++ b/arch/arm/mm/cache-tauros3.h @@ -0,0 +1,41 @@ +/* + * Marvell Tauros3 cache controller includes + * + * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * + * based on GPL'ed 2.6 kernel sources + * (c) Marvell International Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARM_HARDWARE_TAUROS3_H +#define __ASM_ARM_HARDWARE_TAUROS3_H + +/* + * Marvell Tauros3 L2CC is compatible with PL310 r0p0 + * but with PREFETCH_CTRL (r2p0) and an additional event counter. + * Also, there is AUX2_CTRL for some Marvell specific control. + */ + +#define TAUROS3_EVENT_CNT2_CFG 0x224 +#define TAUROS3_EVENT_CNT2_VAL 0x228 +#define TAUROS3_INV_ALL 0x780 +#define TAUROS3_CLEAN_ALL 0x784 +#define TAUROS3_AUX2_CTRL 0x820 + +/* Registers shifts and masks */ +#define TAUROS3_AUX2_CTRL_LINEFILL_BURST8_EN (1 << 2) + +#endif diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index b5c467a65c27..778bcf88ee79 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -146,18 +146,18 @@ flush_levels: ldr r7, =0x7fff ands r7, r7, r1, lsr #13 @ extract max number of the index size loop1: - mov r9, r4 @ create working copy of max way size + mov r9, r7 @ create working copy of max index loop2: - ARM( orr r11, r10, r9, lsl r5 ) @ factor way and cache number into r11 - THUMB( lsl r6, r9, r5 ) + ARM( orr r11, r10, r4, lsl r5 ) @ factor way and cache number into r11 + THUMB( lsl r6, r4, r5 ) THUMB( orr r11, r10, r6 ) @ factor way and cache number into r11 - ARM( orr r11, r11, r7, lsl r2 ) @ factor index number into r11 - THUMB( lsl r6, r7, r2 ) + ARM( orr r11, r11, r9, lsl r2 ) @ factor index number into r11 + THUMB( lsl r6, r9, r2 ) THUMB( orr r11, r11, r6 ) @ factor index number into r11 mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way - subs r9, r9, #1 @ decrement the way + subs r9, r9, #1 @ decrement the index bge loop2 - subs r7, r7, #1 @ decrement the index + subs r4, r4, #1 @ decrement the way bge loop1 skip: add r10, r10, #2 @ increment cache number diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index 84e6f772e204..6eb97b3a7481 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -36,8 +36,8 @@ * The context ID is used by debuggers and trace logic, and * should be unique within all running processes. * - * In big endian operation, the two 32 bit words are swapped if accesed by - * non 64-bit operations. + * In big endian operation, the two 32 bit words are swapped if accessed + * by non-64-bit operations. */ #define ASID_FIRST_VERSION (1ULL << ASID_BITS) #define NUM_USER_ASIDS ASID_FIRST_VERSION @@ -78,20 +78,21 @@ void a15_erratum_get_cpumask(int this_cpu, struct mm_struct *mm, #endif #ifdef CONFIG_ARM_LPAE -static void cpu_set_reserved_ttbr0(void) -{ - /* - * Set TTBR0 to swapper_pg_dir which contains only global entries. The - * ASID is set to 0. - */ - cpu_set_ttbr(0, __pa(swapper_pg_dir)); - isb(); -} +/* + * With LPAE, the ASID and page tables are updated atomicly, so there is + * no need for a reserved set of tables (the active ASID tracking prevents + * any issues across a rollover). + */ +#define cpu_set_reserved_ttbr0() #else static void cpu_set_reserved_ttbr0(void) { u32 ttb; - /* Copy TTBR1 into TTBR0 */ + /* + * Copy TTBR1 into TTBR0. + * This points at swapper_pg_dir, which contains only global + * entries so any speculative walks are perfectly safe. + */ asm volatile( " mrc p15, 0, %0, c2, c0, 1 @ read TTBR1\n" " mcr p15, 0, %0, c2, c0, 0 @ set TTBR0\n" @@ -179,6 +180,7 @@ static int is_reserved_asid(u64 asid) static u64 new_context(struct mm_struct *mm, unsigned int cpu) { + static u32 cur_idx = 1; u64 asid = atomic64_read(&mm->context.id); u64 generation = atomic64_read(&asid_generation); @@ -193,10 +195,13 @@ static u64 new_context(struct mm_struct *mm, unsigned int cpu) * Allocate a free ASID. If we can't find one, take a * note of the currently active ASIDs and mark the TLBs * as requiring flushes. We always count from ASID #1, - * as we reserve ASID #0 to switch via TTBR0 and indicate - * rollover events. + * as we reserve ASID #0 to switch via TTBR0 and to + * avoid speculative page table walks from hitting in + * any partial walk caches, which could be populated + * from overlapping level-1 descriptors used to map both + * the module area and the userspace stack. */ - asid = find_next_zero_bit(asid_map, NUM_USER_ASIDS, 1); + asid = find_next_zero_bit(asid_map, NUM_USER_ASIDS, cur_idx); if (asid == NUM_USER_ASIDS) { generation = atomic64_add_return(ASID_FIRST_VERSION, &asid_generation); @@ -204,6 +209,7 @@ static u64 new_context(struct mm_struct *mm, unsigned int cpu) asid = find_next_zero_bit(asid_map, NUM_USER_ASIDS, 1); } __set_bit(asid, asid_map); + cur_idx = asid; asid |= generation; cpumask_clear(mm_cpumask(mm)); } @@ -221,8 +227,9 @@ void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk) __check_vmalloc_seq(mm); /* - * Required during context switch to avoid speculative page table - * walking with the wrong TTBR. + * We cannot update the pgd and the ASID atomicly with classic + * MMU, so switch exclusively to global mappings to avoid + * speculative page table walking with the wrong TTBR. */ cpu_set_reserved_ttbr0(); diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index f61a5707823a..1a77450e728a 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -376,7 +376,7 @@ void __init init_dma_coherent_pool_size(unsigned long size) static int __init atomic_pool_init(void) { struct dma_pool *pool = &atomic_pool; - pgprot_t prot = pgprot_dmacoherent(pgprot_kernel); + pgprot_t prot = pgprot_dmacoherent(PAGE_KERNEL); gfp_t gfp = GFP_KERNEL | GFP_DMA; unsigned long nr_pages = pool->size >> PAGE_SHIFT; unsigned long *bitmap; @@ -624,7 +624,7 @@ static void __free_from_contiguous(struct device *dev, struct page *page, if (PageHighMem(page)) __dma_free_remap(cpu_addr, size); else - __dma_remap(page, size, pgprot_kernel); + __dma_remap(page, size, PAGE_KERNEL); dma_release_from_contiguous(dev, page, size >> PAGE_SHIFT); } @@ -1351,7 +1351,7 @@ static void __iommu_free_atomic(struct device *dev, void *cpu_addr, static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs) { - pgprot_t prot = __get_dma_pgprot(attrs, pgprot_kernel); + pgprot_t prot = __get_dma_pgprot(attrs, PAGE_KERNEL); struct page **pages; void *addr = NULL; diff --git a/arch/arm/mm/dump.c b/arch/arm/mm/dump.c new file mode 100644 index 000000000000..2b3a56414271 --- /dev/null +++ b/arch/arm/mm/dump.c @@ -0,0 +1,345 @@ +/* + * Debug helper to dump the current kernel pagetables of the system + * so that we can see what the various memory ranges are set to. + * + * Derived from x86 implementation: + * (C) Copyright 2008 Intel Corporation + * + * Author: Arjan van de Ven <arjan@linux.intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ +#include <linux/debugfs.h> +#include <linux/fs.h> +#include <linux/mm.h> +#include <linux/seq_file.h> + +#include <asm/fixmap.h> +#include <asm/pgtable.h> + +struct addr_marker { + unsigned long start_address; + const char *name; +}; + +static struct addr_marker address_markers[] = { + { MODULES_VADDR, "Modules" }, + { PAGE_OFFSET, "Kernel Mapping" }, + { 0, "vmalloc() Area" }, + { VMALLOC_END, "vmalloc() End" }, + { FIXADDR_START, "Fixmap Area" }, + { CONFIG_VECTORS_BASE, "Vectors" }, + { CONFIG_VECTORS_BASE + PAGE_SIZE * 2, "Vectors End" }, + { -1, NULL }, +}; + +struct pg_state { + struct seq_file *seq; + const struct addr_marker *marker; + unsigned long start_address; + unsigned level; + u64 current_prot; +}; + +struct prot_bits { + u64 mask; + u64 val; + const char *set; + const char *clear; +}; + +static const struct prot_bits pte_bits[] = { + { + .mask = L_PTE_USER, + .val = L_PTE_USER, + .set = "USR", + .clear = " ", + }, { + .mask = L_PTE_RDONLY, + .val = L_PTE_RDONLY, + .set = "ro", + .clear = "RW", + }, { + .mask = L_PTE_XN, + .val = L_PTE_XN, + .set = "NX", + .clear = "x ", + }, { + .mask = L_PTE_SHARED, + .val = L_PTE_SHARED, + .set = "SHD", + .clear = " ", + }, { + .mask = L_PTE_MT_MASK, + .val = L_PTE_MT_UNCACHED, + .set = "SO/UNCACHED", + }, { + .mask = L_PTE_MT_MASK, + .val = L_PTE_MT_BUFFERABLE, + .set = "MEM/BUFFERABLE/WC", + }, { + .mask = L_PTE_MT_MASK, + .val = L_PTE_MT_WRITETHROUGH, + .set = "MEM/CACHED/WT", + }, { + .mask = L_PTE_MT_MASK, + .val = L_PTE_MT_WRITEBACK, + .set = "MEM/CACHED/WBRA", +#ifndef CONFIG_ARM_LPAE + }, { + .mask = L_PTE_MT_MASK, + .val = L_PTE_MT_MINICACHE, + .set = "MEM/MINICACHE", +#endif + }, { + .mask = L_PTE_MT_MASK, + .val = L_PTE_MT_WRITEALLOC, + .set = "MEM/CACHED/WBWA", + }, { + .mask = L_PTE_MT_MASK, + .val = L_PTE_MT_DEV_SHARED, + .set = "DEV/SHARED", +#ifndef CONFIG_ARM_LPAE + }, { + .mask = L_PTE_MT_MASK, + .val = L_PTE_MT_DEV_NONSHARED, + .set = "DEV/NONSHARED", +#endif + }, { + .mask = L_PTE_MT_MASK, + .val = L_PTE_MT_DEV_WC, + .set = "DEV/WC", + }, { + .mask = L_PTE_MT_MASK, + .val = L_PTE_MT_DEV_CACHED, + .set = "DEV/CACHED", + }, +}; + +static const struct prot_bits section_bits[] = { +#ifndef CONFIG_ARM_LPAE + /* These are approximate */ + { + .mask = PMD_SECT_AP_READ | PMD_SECT_AP_WRITE, + .val = 0, + .set = " ro", + }, { + .mask = PMD_SECT_AP_READ | PMD_SECT_AP_WRITE, + .val = PMD_SECT_AP_WRITE, + .set = " RW", + }, { + .mask = PMD_SECT_AP_READ | PMD_SECT_AP_WRITE, + .val = PMD_SECT_AP_READ, + .set = "USR ro", + }, { + .mask = PMD_SECT_AP_READ | PMD_SECT_AP_WRITE, + .val = PMD_SECT_AP_READ | PMD_SECT_AP_WRITE, + .set = "USR RW", +#else + { + .mask = PMD_SECT_USER, + .val = PMD_SECT_USER, + .set = "USR", + }, { + .mask = PMD_SECT_RDONLY, + .val = PMD_SECT_RDONLY, + .set = "ro", + .clear = "RW", +#endif + }, { + .mask = PMD_SECT_XN, + .val = PMD_SECT_XN, + .set = "NX", + .clear = "x ", + }, { + .mask = PMD_SECT_S, + .val = PMD_SECT_S, + .set = "SHD", + .clear = " ", + }, +}; + +struct pg_level { + const struct prot_bits *bits; + size_t num; + u64 mask; +}; + +static struct pg_level pg_level[] = { + { + }, { /* pgd */ + }, { /* pud */ + }, { /* pmd */ + .bits = section_bits, + .num = ARRAY_SIZE(section_bits), + }, { /* pte */ + .bits = pte_bits, + .num = ARRAY_SIZE(pte_bits), + }, +}; + +static void dump_prot(struct pg_state *st, const struct prot_bits *bits, size_t num) +{ + unsigned i; + + for (i = 0; i < num; i++, bits++) { + const char *s; + + if ((st->current_prot & bits->mask) == bits->val) + s = bits->set; + else + s = bits->clear; + + if (s) + seq_printf(st->seq, " %s", s); + } +} + +static void note_page(struct pg_state *st, unsigned long addr, unsigned level, u64 val) +{ + static const char units[] = "KMGTPE"; + u64 prot = val & pg_level[level].mask; + + if (addr < USER_PGTABLES_CEILING) + return; + + if (!st->level) { + st->level = level; + st->current_prot = prot; + seq_printf(st->seq, "---[ %s ]---\n", st->marker->name); + } else if (prot != st->current_prot || level != st->level || + addr >= st->marker[1].start_address) { + const char *unit = units; + unsigned long delta; + + if (st->current_prot) { + seq_printf(st->seq, "0x%08lx-0x%08lx ", + st->start_address, addr); + + delta = (addr - st->start_address) >> 10; + while (!(delta & 1023) && unit[1]) { + delta >>= 10; + unit++; + } + seq_printf(st->seq, "%9lu%c", delta, *unit); + if (pg_level[st->level].bits) + dump_prot(st, pg_level[st->level].bits, pg_level[st->level].num); + seq_printf(st->seq, "\n"); + } + + if (addr >= st->marker[1].start_address) { + st->marker++; + seq_printf(st->seq, "---[ %s ]---\n", st->marker->name); + } + st->start_address = addr; + st->current_prot = prot; + st->level = level; + } +} + +static void walk_pte(struct pg_state *st, pmd_t *pmd, unsigned long start) +{ + pte_t *pte = pte_offset_kernel(pmd, 0); + unsigned long addr; + unsigned i; + + for (i = 0; i < PTRS_PER_PTE; i++, pte++) { + addr = start + i * PAGE_SIZE; + note_page(st, addr, 4, pte_val(*pte)); + } +} + +static void walk_pmd(struct pg_state *st, pud_t *pud, unsigned long start) +{ + pmd_t *pmd = pmd_offset(pud, 0); + unsigned long addr; + unsigned i; + + for (i = 0; i < PTRS_PER_PMD; i++, pmd++) { + addr = start + i * PMD_SIZE; + if (pmd_none(*pmd) || pmd_large(*pmd) || !pmd_present(*pmd)) + note_page(st, addr, 3, pmd_val(*pmd)); + else + walk_pte(st, pmd, addr); + } +} + +static void walk_pud(struct pg_state *st, pgd_t *pgd, unsigned long start) +{ + pud_t *pud = pud_offset(pgd, 0); + unsigned long addr; + unsigned i; + + for (i = 0; i < PTRS_PER_PUD; i++, pud++) { + addr = start + i * PUD_SIZE; + if (!pud_none(*pud)) { + walk_pmd(st, pud, addr); + } else { + note_page(st, addr, 2, pud_val(*pud)); + } + } +} + +static void walk_pgd(struct seq_file *m) +{ + pgd_t *pgd = swapper_pg_dir; + struct pg_state st; + unsigned long addr; + unsigned i, pgdoff = USER_PGTABLES_CEILING / PGDIR_SIZE; + + memset(&st, 0, sizeof(st)); + st.seq = m; + st.marker = address_markers; + + pgd += pgdoff; + + for (i = pgdoff; i < PTRS_PER_PGD; i++, pgd++) { + addr = i * PGDIR_SIZE; + if (!pgd_none(*pgd)) { + walk_pud(&st, pgd, addr); + } else { + note_page(&st, addr, 1, pgd_val(*pgd)); + } + } + + note_page(&st, 0, 0, 0); +} + +static int ptdump_show(struct seq_file *m, void *v) +{ + walk_pgd(m); + return 0; +} + +static int ptdump_open(struct inode *inode, struct file *file) +{ + return single_open(file, ptdump_show, NULL); +} + +static const struct file_operations ptdump_fops = { + .open = ptdump_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int ptdump_init(void) +{ + struct dentry *pe; + unsigned i, j; + + for (i = 0; i < ARRAY_SIZE(pg_level); i++) + if (pg_level[i].bits) + for (j = 0; j < pg_level[i].num; j++) + pg_level[i].mask |= pg_level[i].bits[j].mask; + + address_markers[2].start_address = VMALLOC_START; + + pe = debugfs_create_file("kernel_page_tables", 0400, NULL, NULL, + &ptdump_fops); + return pe ? 0 : -ENOMEM; +} +__initcall(ptdump_init); diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index f123d6eb074b..f9c32ba73544 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -392,9 +392,9 @@ __arm_ioremap_exec(phys_addr_t phys_addr, size_t size, bool cached) unsigned int mtype; if (cached) - mtype = MT_MEMORY; + mtype = MT_MEMORY_RWX; else - mtype = MT_MEMORY_NONCACHED; + mtype = MT_MEMORY_RWX_NONCACHED; return __arm_ioremap_caller(phys_addr, size, mtype, __builtin_return_address(0)); diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 580ef2de82d7..4f08c133cc25 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -22,6 +22,7 @@ #include <asm/cputype.h> #include <asm/sections.h> #include <asm/cachetype.h> +#include <asm/sections.h> #include <asm/setup.h> #include <asm/smp_plat.h> #include <asm/tlb.h> @@ -287,36 +288,43 @@ static struct mem_type mem_types[] = { .prot_l1 = PMD_TYPE_TABLE, .domain = DOMAIN_USER, }, - [MT_MEMORY] = { + [MT_MEMORY_RWX] = { .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY, .prot_l1 = PMD_TYPE_TABLE, .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE, .domain = DOMAIN_KERNEL, }, + [MT_MEMORY_RW] = { + .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | + L_PTE_XN, + .prot_l1 = PMD_TYPE_TABLE, + .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE, + .domain = DOMAIN_KERNEL, + }, [MT_ROM] = { .prot_sect = PMD_TYPE_SECT, .domain = DOMAIN_KERNEL, }, - [MT_MEMORY_NONCACHED] = { + [MT_MEMORY_RWX_NONCACHED] = { .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | L_PTE_MT_BUFFERABLE, .prot_l1 = PMD_TYPE_TABLE, .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE, .domain = DOMAIN_KERNEL, }, - [MT_MEMORY_DTCM] = { + [MT_MEMORY_RW_DTCM] = { .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | L_PTE_XN, .prot_l1 = PMD_TYPE_TABLE, .prot_sect = PMD_TYPE_SECT | PMD_SECT_XN, .domain = DOMAIN_KERNEL, }, - [MT_MEMORY_ITCM] = { + [MT_MEMORY_RWX_ITCM] = { .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY, .prot_l1 = PMD_TYPE_TABLE, .domain = DOMAIN_KERNEL, }, - [MT_MEMORY_SO] = { + [MT_MEMORY_RW_SO] = { .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | L_PTE_MT_UNCACHED | L_PTE_XN, .prot_l1 = PMD_TYPE_TABLE, @@ -325,7 +333,8 @@ static struct mem_type mem_types[] = { .domain = DOMAIN_KERNEL, }, [MT_MEMORY_DMA_READY] = { - .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY, + .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | + L_PTE_XN, .prot_l1 = PMD_TYPE_TABLE, .domain = DOMAIN_KERNEL, }, @@ -337,6 +346,44 @@ const struct mem_type *get_mem_type(unsigned int type) } EXPORT_SYMBOL(get_mem_type); +#define PTE_SET_FN(_name, pteop) \ +static int pte_set_##_name(pte_t *ptep, pgtable_t token, unsigned long addr, \ + void *data) \ +{ \ + pte_t pte = pteop(*ptep); \ +\ + set_pte_ext(ptep, pte, 0); \ + return 0; \ +} \ + +#define SET_MEMORY_FN(_name, callback) \ +int set_memory_##_name(unsigned long addr, int numpages) \ +{ \ + unsigned long start = addr; \ + unsigned long size = PAGE_SIZE*numpages; \ + unsigned end = start + size; \ +\ + if (start < MODULES_VADDR || start >= MODULES_END) \ + return -EINVAL;\ +\ + if (end < MODULES_VADDR || end >= MODULES_END) \ + return -EINVAL; \ +\ + apply_to_page_range(&init_mm, start, size, callback, NULL); \ + flush_tlb_kernel_range(start, end); \ + return 0;\ +} + +PTE_SET_FN(ro, pte_wrprotect) +PTE_SET_FN(rw, pte_mkwrite) +PTE_SET_FN(x, pte_mkexec) +PTE_SET_FN(nx, pte_mknexec) + +SET_MEMORY_FN(ro, pte_set_ro) +SET_MEMORY_FN(rw, pte_set_rw) +SET_MEMORY_FN(x, pte_set_x) +SET_MEMORY_FN(nx, pte_set_nx) + /* * Adjust the PMD section entries according to the CPU in use. */ @@ -410,6 +457,9 @@ static void __init build_mem_type_table(void) mem_types[MT_DEVICE_NONSHARED].prot_sect |= PMD_SECT_XN; mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_XN; mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_XN; + + /* Also setup NX memory mapping */ + mem_types[MT_MEMORY_RW].prot_sect |= PMD_SECT_XN; } if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) { /* @@ -487,11 +537,13 @@ static void __init build_mem_type_table(void) mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_SHARED; mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S; mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED; - mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S; - mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED; + mem_types[MT_MEMORY_RWX].prot_sect |= PMD_SECT_S; + mem_types[MT_MEMORY_RWX].prot_pte |= L_PTE_SHARED; + mem_types[MT_MEMORY_RW].prot_sect |= PMD_SECT_S; + mem_types[MT_MEMORY_RW].prot_pte |= L_PTE_SHARED; mem_types[MT_MEMORY_DMA_READY].prot_pte |= L_PTE_SHARED; - mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S; - mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED; + mem_types[MT_MEMORY_RWX_NONCACHED].prot_sect |= PMD_SECT_S; + mem_types[MT_MEMORY_RWX_NONCACHED].prot_pte |= L_PTE_SHARED; } } @@ -502,15 +554,15 @@ static void __init build_mem_type_table(void) if (cpu_arch >= CPU_ARCH_ARMv6) { if (cpu_arch >= CPU_ARCH_ARMv7 && (cr & CR_TRE)) { /* Non-cacheable Normal is XCB = 001 */ - mem_types[MT_MEMORY_NONCACHED].prot_sect |= + mem_types[MT_MEMORY_RWX_NONCACHED].prot_sect |= PMD_SECT_BUFFERED; } else { /* For both ARMv6 and non-TEX-remapping ARMv7 */ - mem_types[MT_MEMORY_NONCACHED].prot_sect |= + mem_types[MT_MEMORY_RWX_NONCACHED].prot_sect |= PMD_SECT_TEX(1); } } else { - mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_BUFFERABLE; + mem_types[MT_MEMORY_RWX_NONCACHED].prot_sect |= PMD_SECT_BUFFERABLE; } #ifdef CONFIG_ARM_LPAE @@ -543,10 +595,12 @@ static void __init build_mem_type_table(void) mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask; mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask; - mem_types[MT_MEMORY].prot_sect |= ecc_mask | cp->pmd; - mem_types[MT_MEMORY].prot_pte |= kern_pgprot; + mem_types[MT_MEMORY_RWX].prot_sect |= ecc_mask | cp->pmd; + mem_types[MT_MEMORY_RWX].prot_pte |= kern_pgprot; + mem_types[MT_MEMORY_RW].prot_sect |= ecc_mask | cp->pmd; + mem_types[MT_MEMORY_RW].prot_pte |= kern_pgprot; mem_types[MT_MEMORY_DMA_READY].prot_pte |= kern_pgprot; - mem_types[MT_MEMORY_NONCACHED].prot_sect |= ecc_mask; + mem_types[MT_MEMORY_RWX_NONCACHED].prot_sect |= ecc_mask; mem_types[MT_ROM].prot_sect |= cp->pmd; switch (cp->pmd) { @@ -1296,6 +1350,8 @@ static void __init kmap_init(void) static void __init map_lowmem(void) { struct memblock_region *reg; + unsigned long kernel_x_start = round_down(__pa(_stext), SECTION_SIZE); + unsigned long kernel_x_end = round_up(__pa(__init_end), SECTION_SIZE); /* Map all the lowmem memory banks. */ for_each_memblock(memory, reg) { @@ -1308,12 +1364,40 @@ static void __init map_lowmem(void) if (start >= end) break; - map.pfn = __phys_to_pfn(start); - map.virtual = __phys_to_virt(start); - map.length = end - start; - map.type = MT_MEMORY; + if (end < kernel_x_start || start >= kernel_x_end) { + map.pfn = __phys_to_pfn(start); + map.virtual = __phys_to_virt(start); + map.length = end - start; + map.type = MT_MEMORY_RWX; - create_mapping(&map); + create_mapping(&map); + } else { + /* This better cover the entire kernel */ + if (start < kernel_x_start) { + map.pfn = __phys_to_pfn(start); + map.virtual = __phys_to_virt(start); + map.length = kernel_x_start - start; + map.type = MT_MEMORY_RW; + + create_mapping(&map); + } + + map.pfn = __phys_to_pfn(kernel_x_start); + map.virtual = __phys_to_virt(kernel_x_start); + map.length = kernel_x_end - kernel_x_start; + map.type = MT_MEMORY_RWX; + + create_mapping(&map); + + if (kernel_x_end < end) { + map.pfn = __phys_to_pfn(kernel_x_end); + map.virtual = __phys_to_virt(kernel_x_end); + map.length = end - kernel_x_end; + map.type = MT_MEMORY_RW; + + create_mapping(&map); + } + } } } diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c index 1046b373d1ae..249379535be2 100644 --- a/arch/arm/mm/pgd.c +++ b/arch/arm/mm/pgd.c @@ -23,7 +23,7 @@ #define __pgd_alloc() kmalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL) #define __pgd_free(pgd) kfree(pgd) #else -#define __pgd_alloc() (pgd_t *)__get_free_pages(GFP_KERNEL, 2) +#define __pgd_alloc() (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_REPEAT, 2) #define __pgd_free(pgd) free_pages((unsigned long)pgd, 2) #endif diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index fb92abb91628..2861b155485a 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -336,8 +336,11 @@ static inline void __omap_dm_timer_enable_posted(struct omap_dm_timer *timer) if (timer->posted) return; - if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) + if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) { + timer->posted = OMAP_TIMER_NONPOSTED; + __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, 0, 0); return; + } __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, OMAP_TIMER_CTRL_POSTED, 0); diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index 83e4f959ee47..85501238b425 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -96,7 +96,7 @@ static int remap_pte_fn(pte_t *ptep, pgtable_t token, unsigned long addr, struct remap_data *info = data; struct page *page = info->pages[info->index++]; unsigned long pfn = page_to_pfn(page); - pte_t pte = pfn_pte(pfn, info->prot); + pte_t pte = pte_mkspecial(pfn_pte(pfn, info->prot)); if (map_foreign_page(pfn, info->fgmfn, info->domid)) return -EFAULT; @@ -224,10 +224,10 @@ static int __init xen_guest_init(void) } if (of_address_to_resource(node, GRANT_TABLE_PHYSADDR, &res)) return 0; - xen_hvm_resume_frames = res.start >> PAGE_SHIFT; + xen_hvm_resume_frames = res.start; xen_events_irq = irq_of_parse_and_map(node, 0); pr_info("Xen %s support found, events_irq=%d gnttab_frame_pfn=%lx\n", - version, xen_events_irq, xen_hvm_resume_frames); + version, xen_events_irq, (xen_hvm_resume_frames >> PAGE_SHIFT)); xen_domain_type = XEN_HVM_DOMAIN; xen_setup_features(); diff --git a/arch/arm/xen/p2m.c b/arch/arm/xen/p2m.c index 23732cdff551..b31ee1b275b0 100644 --- a/arch/arm/xen/p2m.c +++ b/arch/arm/xen/p2m.c @@ -25,8 +25,9 @@ struct xen_p2m_entry { struct rb_node rbnode_phys; }; -rwlock_t p2m_lock; +static rwlock_t p2m_lock; struct rb_root phys_to_mach = RB_ROOT; +EXPORT_SYMBOL_GPL(phys_to_mach); static struct rb_root mach_to_phys = RB_ROOT; static int xen_add_phys_to_mach_entry(struct xen_p2m_entry *new) @@ -200,7 +201,7 @@ bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn) } EXPORT_SYMBOL_GPL(__set_phys_to_machine); -int p2m_init(void) +static int p2m_init(void) { rwlock_init(&p2m_lock); return 0; |