diff options
Diffstat (limited to 'arch/arm')
232 files changed, 2614 insertions, 8906 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a9c4e48bb7ec..125657b602a4 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1,6 +1,7 @@ config ARM bool default y + select ARCH_CLOCKSOURCE_DATA select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select ARCH_HAS_DEVMEM_IS_ALLOWED select ARCH_HAS_ELF_RANDOMIZE @@ -278,10 +279,9 @@ config PHYS_OFFSET ARCH_INTEGRATOR || \ ARCH_IOP13XX || \ ARCH_KS8695 || \ - (ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET) + ARCH_REALVIEW default 0x10000000 if ARCH_OMAP1 || ARCH_RPC default 0x20000000 if ARCH_S5PV210 - default 0x70000000 if REALVIEW_HIGH_PHYS_OFFSET default 0xc0000000 if ARCH_SA1100 help Please provide the physical address corresponding to the @@ -337,6 +337,7 @@ config ARCH_MULTIPLATFORM select GENERIC_CLOCKEVENTS select MIGHT_HAVE_PCI select MULTI_IRQ_HANDLER + select PCI_DOMAINS if PCI select SPARSE_IRQ select USE_OF @@ -878,6 +879,7 @@ config ARCH_STM32 select CLKSRC_STM32 select PINCTRL select RESET_CONTROLLER + select STM32_EXTI help Support for STMicroelectronics STM32 processors. diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 61f6ccc19cfa..6be9ee148b78 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -23,7 +23,6 @@ ifeq ($(CONFIG_ARM_MODULE_PLTS),y) LDFLAGS_MODULE += -T $(srctree)/arch/arm/kernel/module.lds endif -OBJCOPYFLAGS :=-O binary -R .comment -S GZFLAGS :=-9 #KBUILD_CFLAGS +=-pipe diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index bdc1d5af03d2..50f8d1be7fcb 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -11,6 +11,8 @@ # Copyright (C) 1995-2002 Russell King # +OBJCOPYFLAGS :=-O binary -R .comment -S + ifneq ($(MACHINE),) include $(MACHINE)/Makefile.boot endif diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index af11c2f8f3b7..fc6d541549a2 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -779,7 +779,7 @@ __armv7_mmu_cache_on: orrne r0, r0, #1 @ MMU enabled movne r1, #0xfffffffd @ domain 0 = client bic r6, r6, #1 << 31 @ 32-bit translation system - bic r6, r6, #3 << 0 @ use only ttbr0 + bic r6, r6, #(7 << 0) | (1 << 4) @ use only ttbr0 mcrne p15, 0, r3, c2, c0, 0 @ load page table pointer mcrne p15, 0, r1, c3, c0, 0 @ load domain access control mcrne p15, 0, r6, c2, c0, 2 @ load ttb control diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi index c8609d8d2c55..b689172632ef 100644 --- a/arch/arm/boot/dts/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/am335x-baltos.dtsi @@ -226,7 +226,7 @@ #address-cells = <1>; #size-cells = <1>; - elm_id = <&elm>; + ti,elm-id = <&elm>; }; }; diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index df63484ef9b3..e7d9ca1305fa 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -161,7 +161,7 @@ #address-cells = <1>; #size-cells = <1>; - elm_id = <&elm>; + ti,elm-id = <&elm>; /* MTD partition table */ partition@0 { diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi index 86f773165d5c..1263c9d4cba3 100644 --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -197,7 +197,7 @@ gpmc,wr-access-ns = <30>; gpmc,wr-data-mux-bus-ns = <0>; - elm_id = <&elm>; + ti,elm-id = <&elm>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts index 2e0556af6e5e..d3e6bd805006 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dts +++ b/arch/arm/boot/dts/armada-388-clearfog.dts @@ -390,12 +390,12 @@ port@0 { reg = <0>; - label = "lan1"; + label = "lan5"; }; port@1 { reg = <1>; - label = "lan2"; + label = "lan4"; }; port@2 { @@ -405,12 +405,12 @@ port@3 { reg = <3>; - label = "lan4"; + label = "lan2"; }; port@4 { reg = <4>; - label = "lan5"; + label = "lan1"; }; port@5 { diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index caf2707680c1..e9b47b2bbc33 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -2,6 +2,7 @@ / { memory { + device_type = "memory"; reg = <0 0x10000000>; }; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index b98252232d20..445624a1a1de 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -2,7 +2,6 @@ #include <dt-bindings/clock/bcm2835.h> #include <dt-bindings/clock/bcm2835-aux.h> #include <dt-bindings/gpio/gpio.h> -#include "skeleton.dtsi" /* This include file covers the common peripherals and configuration between * bcm2835 and bcm2836 implementations, leaving the CPU configuration to @@ -13,6 +12,8 @@ compatible = "brcm,bcm2835"; model = "BCM2835"; interrupt-parent = <&intc>; + #address-cells = <1>; + #size-cells = <1>; chosen { bootargs = "earlyprintk console=ttyAMA0"; diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts index d9499310a301..f6d135245a4b 100644 --- a/arch/arm/boot/dts/exynos5410-odroidxu.dts +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -447,14 +447,11 @@ samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; - samsung,dw-mshc-hs400-timing = <0 2>; - samsung,read-strobe-delay = <90>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>; bus-width = <8>; cap-mmc-highspeed; mmc-hs200-1_8v; - mmc-hs400-1_8v; vmmc-supply = <&ldo20_reg>; vqmmc-supply = <&ldo11_reg>; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index b620ac884cfd..b13b0b2db881 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -243,7 +243,7 @@ clocks = <&clks IMX6QDL_CLK_SPDIF_GCLK>, <&clks IMX6QDL_CLK_OSC>, <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_ASRC>, <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_ESAI_EXTAL>, - <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_MLB>, + <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_SPBA>; clock-names = "core", "rxtx0", "rxtx1", "rxtx2", diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts index 96ea936eeeb0..240a2864d044 100644 --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts @@ -64,7 +64,7 @@ cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>; no-1-8-v; keep-power-in-suspend; - enable-sdio-wakup; + wakeup-source; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 95ee268ed510..2f33c463cbce 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -131,7 +131,7 @@ ti,y-min = /bits/ 16 <0>; ti,y-max = /bits/ 16 <0>; ti,pressure-max = /bits/ 16 <0>; - ti,x-plat-ohms = /bits/ 16 <400>; + ti,x-plate-ohms = /bits/ 16 <400>; wakeup-source; }; }; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index ef84d8699a76..5bf62897014c 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -113,7 +113,7 @@ partition@e0000 { label = "u-boot environment"; - reg = <0xe0000 0x100000>; + reg = <0xe0000 0x20000>; }; partition@100000 { diff --git a/arch/arm/boot/dts/kirkwood-openrd.dtsi b/arch/arm/boot/dts/kirkwood-openrd.dtsi index e4ecab112601..7175511a92da 100644 --- a/arch/arm/boot/dts/kirkwood-openrd.dtsi +++ b/arch/arm/boot/dts/kirkwood-openrd.dtsi @@ -116,6 +116,10 @@ }; }; +&pciec { + status = "okay"; +}; + &pcie0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index 365f39ff58bb..0ff1c2de95bf 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -35,10 +35,15 @@ ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { - linux,mtd-name = "micron,mt29f4g16abbda3w"; + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + linux,mtd-name = "micron,mt29f4g16abbda3w"; nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <44>; @@ -54,10 +59,6 @@ gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; gpmc,device-width = <2>; - - gpmc,page-burst-access-ns = <5>; - gpmc,cycle2cycle-delay-ns = <50>; - #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 5e9a13c0eaf7..1c2c74655416 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -46,6 +46,7 @@ linux,mtd-name = "micron,mt29f4g16abbda3w"; nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <44>; diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi index de256fa8da48..3e946cac55f3 100644 --- a/arch/arm/boot/dts/omap3-overo-base.dtsi +++ b/arch/arm/boot/dts/omap3-overo-base.dtsi @@ -223,7 +223,9 @@ }; &gpmc { - ranges = <0 0 0x00000000 0x20000000>; + ranges = <0 0 0x30000000 0x1000000>, /* CS0 */ + <4 0 0x2b000000 0x1000000>, /* CS4 */ + <5 0 0x2c000000 0x1000000>; /* CS5 */ nand@0,0 { compatible = "ti,omap2-nand"; diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi index 7df27926ead2..4f4c6efbd518 100644 --- a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi @@ -55,8 +55,6 @@ #include "omap-gpmc-smsc9221.dtsi" &gpmc { - ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */ - ethernet@gpmc { reg = <5 0 0xff>; interrupt-parent = <&gpio6>; diff --git a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi index 9e24b6a1d07b..1b304e2f1bd2 100644 --- a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi @@ -27,8 +27,6 @@ #include "omap-gpmc-smsc9221.dtsi" &gpmc { - ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */ - ethernet@gpmc { reg = <5 0 0xff>; interrupt-parent = <&gpio6>; diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi index 334109e14613..82e98ee3023a 100644 --- a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi @@ -15,9 +15,6 @@ #include "omap-gpmc-smsc9221.dtsi" &gpmc { - ranges = <4 0 0x2b000000 0x1000000>, /* CS4 */ - <5 0 0x2c000000 0x1000000>; /* CS5 */ - smsc1: ethernet@gpmc { reg = <5 0 0xff>; interrupt-parent = <&gpio6>; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index c0ba86c3a2ab..0d0dae3a1694 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -197,6 +197,8 @@ clock-names = "saradc", "apb_pclk"; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; #io-channel-cells = <1>; + resets = <&cru SRST_SARADC>; + reset-names = "saradc-apb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index cd33f0170890..91c4b3c7a8d5 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -279,6 +279,8 @@ #io-channel-cells = <1>; clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; clock-names = "saradc", "apb_pclk"; + resets = <&cru SRST_SARADC>; + reset-names = "saradc-apb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 99bbcc2c9b89..e2cd683b4e4b 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -399,6 +399,8 @@ #io-channel-cells = <1>; clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; clock-names = "saradc", "apb_pclk"; + resets = <&cru SRST_SARADC>; + reset-names = "saradc-apb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index 94000cbe576b..f520cbff5e1c 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -639,6 +639,22 @@ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>, <37 IRQ_TYPE_LEVEL_HIGH>; }; + + dma-ecc@ff8c8000 { + compatible = "altr,socfpga-dma-ecc"; + reg = <0xff8c8000 0x400>; + altr,ecc-parent = <&pdma>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>, + <42 IRQ_TYPE_LEVEL_HIGH>; + }; + + usb0-ecc@ff8c8800 { + compatible = "altr,socfpga-usb-ecc"; + reg = <0xff8c8800 0x400>; + altr,ecc-parent = <&usb0>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>, + <34 IRQ_TYPE_LEVEL_HIGH>; + }; }; rst: rstmgr@ffd05000 { diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts index 8a7dfa473e98..040a164ba148 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts +++ b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts @@ -25,3 +25,15 @@ broken-cd; bus-width = <4>; }; + +&eccmgr { + sdmmca-ecc@ff8c2c00 { + compatible = "altr,socfpga-sdmmc-ecc"; + reg = <0xff8c2c00 0x400>; + altr,ecc-parent = <&mmc>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH>, + <47 IRQ_TYPE_LEVEL_HIGH>, + <16 IRQ_TYPE_LEVEL_HIGH>, + <48 IRQ_TYPE_LEVEL_HIGH>; + }; +}; diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index d294e82447a2..8b063ab10c19 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -550,8 +550,9 @@ interrupt-names = "mmcirq"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc0>; - clock-names = "mmc"; - clocks = <&clk_s_c0_flexgen CLK_MMC_0>; + clock-names = "mmc", "icn"; + clocks = <&clk_s_c0_flexgen CLK_MMC_0>, + <&clk_s_c0_flexgen CLK_RX_ICN_HVA>; bus-width = <8>; non-removable; }; @@ -565,8 +566,9 @@ interrupt-names = "mmcirq"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sd1>; - clock-names = "mmc"; - clocks = <&clk_s_c0_flexgen CLK_MMC_1>; + clock-names = "mmc", "icn"; + clocks = <&clk_s_c0_flexgen CLK_MMC_1>, + <&clk_s_c0_flexgen CLK_RX_ICN_HVA>; resets = <&softreset STIH407_MMC1_SOFTRESET>; bus-width = <4>; }; diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi index 18ed1ad10d32..40318869c733 100644 --- a/arch/arm/boot/dts/stih410.dtsi +++ b/arch/arm/boot/dts/stih410.dtsi @@ -41,7 +41,8 @@ compatible = "st,st-ohci-300x"; reg = <0x9a03c00 0x100>; interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>; - clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>, + <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>; resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>, <&softreset STIH407_USB2_PORT0_SOFTRESET>; reset-names = "power", "softreset"; @@ -57,7 +58,8 @@ interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0>; - clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>, + <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>; resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>, <&softreset STIH407_USB2_PORT0_SOFTRESET>; reset-names = "power", "softreset"; @@ -71,7 +73,8 @@ compatible = "st,st-ohci-300x"; reg = <0x9a83c00 0x100>; interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>; - clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>, + <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>; resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>, <&softreset STIH407_USB2_PORT1_SOFTRESET>; reset-names = "power", "softreset"; @@ -87,7 +90,8 @@ interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1>; - clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>, + <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>; resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>, <&softreset STIH407_USB2_PORT1_SOFTRESET>; reset-names = "power", "softreset"; diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index 35df462559ca..1a189d44ad38 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -176,6 +176,14 @@ reg = <0x40013800 0x400>; }; + exti: interrupt-controller@40013c00 { + compatible = "st,stm32-exti"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x40013C00 0x400>; + interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>; + }; + pin-controller { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index e012890e0cf2..a17ba0243db3 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -84,7 +84,7 @@ trips { cpu_alert0: cpu_alert0 { /* milliCelsius */ - temperature = <850000>; + temperature = <85000>; hysteresis = <2000>; type = "passive"; }; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 1867af24ff52..0d24f107ede0 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -469,7 +469,7 @@ }; mmc0: mmc@01c0f000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&ahb1_gates 8>, <&mmc0_clk 0>, @@ -488,7 +488,7 @@ }; mmc1: mmc@01c10000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c10000 0x1000>; clocks = <&ahb1_gates 9>, <&mmc1_clk 0>, @@ -507,7 +507,7 @@ }; mmc2: mmc@01c11000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c11000 0x1000>; clocks = <&ahb1_gates 10>, <&mmc2_clk 0>, @@ -526,7 +526,7 @@ }; mmc3: mmc@01c12000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c12000 0x1000>; clocks = <&ahb1_gates 11>, <&mmc3_clk 0>, diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index bd0c47660243..94cf5a1c7172 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -905,7 +905,7 @@ }; mmc0: mmc@01c0f000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&ahb_gates 8>, <&mmc0_clk 0>, @@ -922,7 +922,7 @@ }; mmc1: mmc@01c10000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c10000 0x1000>; clocks = <&ahb_gates 9>, <&mmc1_clk 0>, @@ -939,7 +939,7 @@ }; mmc2: mmc@01c11000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c11000 0x1000>; clocks = <&ahb_gates 10>, <&mmc2_clk 0>, @@ -956,7 +956,7 @@ }; mmc3: mmc@01c12000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c12000 0x1000>; clocks = <&ahb_gates 11>, <&mmc3_clk 0>, diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 7e05e09e61c7..e3b196e08ccf 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -266,7 +266,7 @@ }; mmc0: mmc@01c0f000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&ahb1_gates 8>, <&mmc0_clk 0>, @@ -285,7 +285,7 @@ }; mmc1: mmc@01c10000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c10000 0x1000>; clocks = <&ahb1_gates 9>, <&mmc1_clk 0>, @@ -304,7 +304,7 @@ }; mmc2: mmc@01c11000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c11000 0x1000>; clocks = <&ahb1_gates 10>, <&mmc2_clk 0>, diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index fdf9fdbda267..8a95e3613488 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -150,7 +150,7 @@ }; mmc0: mmc@01c0f000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>, @@ -169,7 +169,7 @@ }; mmc1: mmc@01c10000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c10000 0x1000>; clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>, @@ -188,7 +188,7 @@ }; mmc2: mmc@01c11000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c11000 0x1000>; clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>, diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index 1dfc492cc004..1444fbd543e7 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -897,7 +897,7 @@ palmas: tps65913@58 { compatible = "ti,palmas"; reg = <0x58>; - interrupts = <0 86 IRQ_TYPE_LEVEL_LOW>; + interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; interrupt-controller; diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts index 70cf40996c3f..966a7fc044af 100644 --- a/arch/arm/boot/dts/tegra114-roth.dts +++ b/arch/arm/boot/dts/tegra114-roth.dts @@ -802,7 +802,7 @@ palmas: pmic@58 { compatible = "ti,palmas"; reg = <0x58>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; interrupt-controller; diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts index 17dd14545862..a161fa1dfb61 100644 --- a/arch/arm/boot/dts/tegra114-tn7.dts +++ b/arch/arm/boot/dts/tegra114-tn7.dts @@ -63,7 +63,7 @@ palmas: pmic@58 { compatible = "ti,palmas"; reg = <0x58>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; interrupt-controller; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index 6403e0de540e..e52b82449a79 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -1382,7 +1382,7 @@ * Pin 41: BR_UART1_TXD * Pin 44: BR_UART1_RXD */ - serial@0,70006000 { + serial@70006000 { compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart"; status = "okay"; }; @@ -1394,7 +1394,7 @@ * Pin 71: UART2_CTS_L * Pin 74: UART2_RTS_L */ - serial@0,70006040 { + serial@70006040 { compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart"; status = "okay"; }; diff --git a/arch/arm/common/bL_switcher_dummy_if.c b/arch/arm/common/bL_switcher_dummy_if.c index 3f47f1203c6b..6053f64c3752 100644 --- a/arch/arm/common/bL_switcher_dummy_if.c +++ b/arch/arm/common/bL_switcher_dummy_if.c @@ -56,16 +56,4 @@ static struct miscdevice bL_switcher_device = { "b.L_switcher", &bL_switcher_fops }; - -static int __init bL_switcher_dummy_if_init(void) -{ - return misc_register(&bL_switcher_device); -} - -static void __exit bL_switcher_dummy_if_exit(void) -{ - misc_deregister(&bL_switcher_device); -} - -module_init(bL_switcher_dummy_if_init); -module_exit(bL_switcher_dummy_if_exit); +module_misc_device(bL_switcher_device); diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index 0e97b4b871f9..6c7b06854fce 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -140,7 +140,7 @@ static struct locomo_dev_info locomo_devices[] = { static void locomo_handler(struct irq_desc *desc) { - struct locomo *lchip = irq_desc_get_chip_data(desc); + struct locomo *lchip = irq_desc_get_handler_data(desc); int req, i; /* Acknowledge the parent IRQ */ @@ -200,8 +200,7 @@ static void locomo_setup_irq(struct locomo *lchip) * Install handler for IRQ_LOCOMO_HW. */ irq_set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING); - irq_set_chip_data(lchip->irq, lchip); - irq_set_chained_handler(lchip->irq, locomo_handler); + irq_set_chained_handler_and_data(lchip->irq, locomo_handler, lchip); /* Install handlers for IRQ_LOCOMO_* */ for ( ; irq <= lchip->irq_base + 3; irq++) { diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index fb0a0a4dfea4..4ecd5120fce7 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -15,6 +15,7 @@ * from machine specific code with proper arguments when required. */ #include <linux/module.h> +#include <linux/gpio/driver.h> #include <linux/init.h> #include <linux/irq.h> #include <linux/kernel.h> @@ -107,6 +108,7 @@ struct sa1111 { spinlock_t lock; void __iomem *base; struct sa1111_platform_data *pdata; + struct gpio_chip gc; #ifdef CONFIG_PM void *saved_state; #endif @@ -231,132 +233,44 @@ static void sa1111_irq_handler(struct irq_desc *desc) #define SA1111_IRQMASK_LO(x) (1 << (x - sachip->irq_base)) #define SA1111_IRQMASK_HI(x) (1 << (x - sachip->irq_base - 32)) -static void sa1111_ack_irq(struct irq_data *d) -{ -} - -static void sa1111_mask_lowirq(struct irq_data *d) +static u32 sa1111_irqmask(struct irq_data *d) { struct sa1111 *sachip = irq_data_get_irq_chip_data(d); - void __iomem *mapbase = sachip->base + SA1111_INTC; - unsigned long ie0; - ie0 = sa1111_readl(mapbase + SA1111_INTEN0); - ie0 &= ~SA1111_IRQMASK_LO(d->irq); - writel(ie0, mapbase + SA1111_INTEN0); + return BIT((d->irq - sachip->irq_base) & 31); } -static void sa1111_unmask_lowirq(struct irq_data *d) +static int sa1111_irqbank(struct irq_data *d) { struct sa1111 *sachip = irq_data_get_irq_chip_data(d); - void __iomem *mapbase = sachip->base + SA1111_INTC; - unsigned long ie0; - ie0 = sa1111_readl(mapbase + SA1111_INTEN0); - ie0 |= SA1111_IRQMASK_LO(d->irq); - sa1111_writel(ie0, mapbase + SA1111_INTEN0); + return ((d->irq - sachip->irq_base) / 32) * 4; } -/* - * Attempt to re-trigger the interrupt. The SA1111 contains a register - * (INTSET) which claims to do this. However, in practice no amount of - * manipulation of INTEN and INTSET guarantees that the interrupt will - * be triggered. In fact, its very difficult, if not impossible to get - * INTSET to re-trigger the interrupt. - */ -static int sa1111_retrigger_lowirq(struct irq_data *d) -{ - struct sa1111 *sachip = irq_data_get_irq_chip_data(d); - void __iomem *mapbase = sachip->base + SA1111_INTC; - unsigned int mask = SA1111_IRQMASK_LO(d->irq); - unsigned long ip0; - int i; - - ip0 = sa1111_readl(mapbase + SA1111_INTPOL0); - for (i = 0; i < 8; i++) { - sa1111_writel(ip0 ^ mask, mapbase + SA1111_INTPOL0); - sa1111_writel(ip0, mapbase + SA1111_INTPOL0); - if (sa1111_readl(mapbase + SA1111_INTSTATCLR0) & mask) - break; - } - - if (i == 8) - pr_err("Danger Will Robinson: failed to re-trigger IRQ%d\n", - d->irq); - return i == 8 ? -1 : 0; -} - -static int sa1111_type_lowirq(struct irq_data *d, unsigned int flags) -{ - struct sa1111 *sachip = irq_data_get_irq_chip_data(d); - void __iomem *mapbase = sachip->base + SA1111_INTC; - unsigned int mask = SA1111_IRQMASK_LO(d->irq); - unsigned long ip0; - - if (flags == IRQ_TYPE_PROBE) - return 0; - - if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0) - return -EINVAL; - - ip0 = sa1111_readl(mapbase + SA1111_INTPOL0); - if (flags & IRQ_TYPE_EDGE_RISING) - ip0 &= ~mask; - else - ip0 |= mask; - sa1111_writel(ip0, mapbase + SA1111_INTPOL0); - sa1111_writel(ip0, mapbase + SA1111_WAKEPOL0); - - return 0; -} - -static int sa1111_wake_lowirq(struct irq_data *d, unsigned int on) +static void sa1111_ack_irq(struct irq_data *d) { - struct sa1111 *sachip = irq_data_get_irq_chip_data(d); - void __iomem *mapbase = sachip->base + SA1111_INTC; - unsigned int mask = SA1111_IRQMASK_LO(d->irq); - unsigned long we0; - - we0 = sa1111_readl(mapbase + SA1111_WAKEEN0); - if (on) - we0 |= mask; - else - we0 &= ~mask; - sa1111_writel(we0, mapbase + SA1111_WAKEEN0); - - return 0; } -static struct irq_chip sa1111_low_chip = { - .name = "SA1111-l", - .irq_ack = sa1111_ack_irq, - .irq_mask = sa1111_mask_lowirq, - .irq_unmask = sa1111_unmask_lowirq, - .irq_retrigger = sa1111_retrigger_lowirq, - .irq_set_type = sa1111_type_lowirq, - .irq_set_wake = sa1111_wake_lowirq, -}; - -static void sa1111_mask_highirq(struct irq_data *d) +static void sa1111_mask_irq(struct irq_data *d) { struct sa1111 *sachip = irq_data_get_irq_chip_data(d); - void __iomem *mapbase = sachip->base + SA1111_INTC; - unsigned long ie1; + void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d); + u32 ie; - ie1 = sa1111_readl(mapbase + SA1111_INTEN1); - ie1 &= ~SA1111_IRQMASK_HI(d->irq); - sa1111_writel(ie1, mapbase + SA1111_INTEN1); + ie = sa1111_readl(mapbase + SA1111_INTEN0); + ie &= ~sa1111_irqmask(d); + sa1111_writel(ie, mapbase + SA1111_INTEN0); } -static void sa1111_unmask_highirq(struct irq_data *d) +static void sa1111_unmask_irq(struct irq_data *d) { struct sa1111 *sachip = irq_data_get_irq_chip_data(d); - void __iomem *mapbase = sachip->base + SA1111_INTC; - unsigned long ie1; + void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d); + u32 ie; - ie1 = sa1111_readl(mapbase + SA1111_INTEN1); - ie1 |= SA1111_IRQMASK_HI(d->irq); - sa1111_writel(ie1, mapbase + SA1111_INTEN1); + ie = sa1111_readl(mapbase + SA1111_INTEN0); + ie |= sa1111_irqmask(d); + sa1111_writel(ie, mapbase + SA1111_INTEN0); } /* @@ -366,19 +280,18 @@ static void sa1111_unmask_highirq(struct irq_data *d) * be triggered. In fact, its very difficult, if not impossible to get * INTSET to re-trigger the interrupt. */ -static int sa1111_retrigger_highirq(struct irq_data *d) +static int sa1111_retrigger_irq(struct irq_data *d) { struct sa1111 *sachip = irq_data_get_irq_chip_data(d); - void __iomem *mapbase = sachip->base + SA1111_INTC; - unsigned int mask = SA1111_IRQMASK_HI(d->irq); - unsigned long ip1; + void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d); + u32 ip, mask = sa1111_irqmask(d); int i; - ip1 = sa1111_readl(mapbase + SA1111_INTPOL1); + ip = sa1111_readl(mapbase + SA1111_INTPOL0); for (i = 0; i < 8; i++) { - sa1111_writel(ip1 ^ mask, mapbase + SA1111_INTPOL1); - sa1111_writel(ip1, mapbase + SA1111_INTPOL1); - if (sa1111_readl(mapbase + SA1111_INTSTATCLR1) & mask) + sa1111_writel(ip ^ mask, mapbase + SA1111_INTPOL0); + sa1111_writel(ip, mapbase + SA1111_INTPOL0); + if (sa1111_readl(mapbase + SA1111_INTSTATCLR0) & mask) break; } @@ -388,12 +301,11 @@ static int sa1111_retrigger_highirq(struct irq_data *d) return i == 8 ? -1 : 0; } -static int sa1111_type_highirq(struct irq_data *d, unsigned int flags) +static int sa1111_type_irq(struct irq_data *d, unsigned int flags) { struct sa1111 *sachip = irq_data_get_irq_chip_data(d); - void __iomem *mapbase = sachip->base + SA1111_INTC; - unsigned int mask = SA1111_IRQMASK_HI(d->irq); - unsigned long ip1; + void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d); + u32 ip, mask = sa1111_irqmask(d); if (flags == IRQ_TYPE_PROBE) return 0; @@ -401,42 +313,41 @@ static int sa1111_type_highirq(struct irq_data *d, unsigned int flags) if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0) return -EINVAL; - ip1 = sa1111_readl(mapbase + SA1111_INTPOL1); + ip = sa1111_readl(mapbase + SA1111_INTPOL0); if (flags & IRQ_TYPE_EDGE_RISING) - ip1 &= ~mask; + ip &= ~mask; else - ip1 |= mask; - sa1111_writel(ip1, mapbase + SA1111_INTPOL1); - sa1111_writel(ip1, mapbase + SA1111_WAKEPOL1); + ip |= mask; + sa1111_writel(ip, mapbase + SA1111_INTPOL0); + sa1111_writel(ip, mapbase + SA1111_WAKEPOL0); return 0; } -static int sa1111_wake_highirq(struct irq_data *d, unsigned int on) +static int sa1111_wake_irq(struct irq_data *d, unsigned int on) { struct sa1111 *sachip = irq_data_get_irq_chip_data(d); - void __iomem *mapbase = sachip->base + SA1111_INTC; - unsigned int mask = SA1111_IRQMASK_HI(d->irq); - unsigned long we1; + void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d); + u32 we, mask = sa1111_irqmask(d); - we1 = sa1111_readl(mapbase + SA1111_WAKEEN1); + we = sa1111_readl(mapbase + SA1111_WAKEEN0); if (on) - we1 |= mask; + we |= mask; else - we1 &= ~mask; - sa1111_writel(we1, mapbase + SA1111_WAKEEN1); + we &= ~mask; + sa1111_writel(we, mapbase + SA1111_WAKEEN0); return 0; } -static struct irq_chip sa1111_high_chip = { - .name = "SA1111-h", +static struct irq_chip sa1111_irq_chip = { + .name = "SA1111", .irq_ack = sa1111_ack_irq, - .irq_mask = sa1111_mask_highirq, - .irq_unmask = sa1111_unmask_highirq, - .irq_retrigger = sa1111_retrigger_highirq, - .irq_set_type = sa1111_type_highirq, - .irq_set_wake = sa1111_wake_highirq, + .irq_mask = sa1111_mask_irq, + .irq_unmask = sa1111_unmask_irq, + .irq_retrigger = sa1111_retrigger_irq, + .irq_set_type = sa1111_type_irq, + .irq_set_wake = sa1111_wake_irq, }; static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base) @@ -472,8 +383,8 @@ static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base) * specifies that S0ReadyInt and S1ReadyInt should be '1'. */ sa1111_writel(0, irqbase + SA1111_INTPOL0); - sa1111_writel(SA1111_IRQMASK_HI(IRQ_S0_READY_NINT) | - SA1111_IRQMASK_HI(IRQ_S1_READY_NINT), + sa1111_writel(BIT(IRQ_S0_READY_NINT & 31) | + BIT(IRQ_S1_READY_NINT & 31), irqbase + SA1111_INTPOL1); /* clear all IRQs */ @@ -482,16 +393,14 @@ static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base) for (i = IRQ_GPAIN0; i <= SSPROR; i++) { irq = sachip->irq_base + i; - irq_set_chip_and_handler(irq, &sa1111_low_chip, - handle_edge_irq); + irq_set_chip_and_handler(irq, &sa1111_irq_chip, handle_edge_irq); irq_set_chip_data(irq, sachip); irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); } for (i = AUDXMTDMADONEA; i <= IRQ_S1_BVD1_STSCHG; i++) { irq = sachip->irq_base + i; - irq_set_chip_and_handler(irq, &sa1111_high_chip, - handle_edge_irq); + irq_set_chip_and_handler(irq, &sa1111_irq_chip, handle_edge_irq); irq_set_chip_data(irq, sachip); irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); } @@ -509,6 +418,181 @@ static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base) return 0; } +static void sa1111_remove_irq(struct sa1111 *sachip) +{ + void __iomem *irqbase = sachip->base + SA1111_INTC; + + /* disable all IRQs */ + sa1111_writel(0, irqbase + SA1111_INTEN0); + sa1111_writel(0, irqbase + SA1111_INTEN1); + sa1111_writel(0, irqbase + SA1111_WAKEEN0); + sa1111_writel(0, irqbase + SA1111_WAKEEN1); + + if (sachip->irq != NO_IRQ) { + irq_set_chained_handler_and_data(sachip->irq, NULL, NULL); + irq_free_descs(sachip->irq_base, SA1111_IRQ_NR); + + release_mem_region(sachip->phys + SA1111_INTC, 512); + } +} + +enum { + SA1111_GPIO_PXDDR = (SA1111_GPIO_PADDR - SA1111_GPIO_PADDR), + SA1111_GPIO_PXDRR = (SA1111_GPIO_PADRR - SA1111_GPIO_PADDR), + SA1111_GPIO_PXDWR = (SA1111_GPIO_PADWR - SA1111_GPIO_PADDR), + SA1111_GPIO_PXSDR = (SA1111_GPIO_PASDR - SA1111_GPIO_PADDR), + SA1111_GPIO_PXSSR = (SA1111_GPIO_PASSR - SA1111_GPIO_PADDR), +}; + +static struct sa1111 *gc_to_sa1111(struct gpio_chip *gc) +{ + return container_of(gc, struct sa1111, gc); +} + +static void __iomem *sa1111_gpio_map_reg(struct sa1111 *sachip, unsigned offset) +{ + void __iomem *reg = sachip->base + SA1111_GPIO; + + if (offset < 4) + return reg + SA1111_GPIO_PADDR; + if (offset < 10) + return reg + SA1111_GPIO_PBDDR; + if (offset < 18) + return reg + SA1111_GPIO_PCDDR; + return NULL; +} + +static u32 sa1111_gpio_map_bit(unsigned offset) +{ + if (offset < 4) + return BIT(offset); + if (offset < 10) + return BIT(offset - 4); + if (offset < 18) + return BIT(offset - 10); + return 0; +} + +static void sa1111_gpio_modify(void __iomem *reg, u32 mask, u32 set) +{ + u32 val; + + val = readl_relaxed(reg); + val &= ~mask; + val |= mask & set; + writel_relaxed(val, reg); +} + +static int sa1111_gpio_get_direction(struct gpio_chip *gc, unsigned offset) +{ + struct sa1111 *sachip = gc_to_sa1111(gc); + void __iomem *reg = sa1111_gpio_map_reg(sachip, offset); + u32 mask = sa1111_gpio_map_bit(offset); + + return !!(readl_relaxed(reg + SA1111_GPIO_PXDDR) & mask); +} + +static int sa1111_gpio_direction_input(struct gpio_chip *gc, unsigned offset) +{ + struct sa1111 *sachip = gc_to_sa1111(gc); + unsigned long flags; + void __iomem *reg = sa1111_gpio_map_reg(sachip, offset); + u32 mask = sa1111_gpio_map_bit(offset); + + spin_lock_irqsave(&sachip->lock, flags); + sa1111_gpio_modify(reg + SA1111_GPIO_PXDDR, mask, mask); + sa1111_gpio_modify(reg + SA1111_GPIO_PXSDR, mask, mask); + spin_unlock_irqrestore(&sachip->lock, flags); + + return 0; +} + +static int sa1111_gpio_direction_output(struct gpio_chip *gc, unsigned offset, + int value) +{ + struct sa1111 *sachip = gc_to_sa1111(gc); + unsigned long flags; + void __iomem *reg = sa1111_gpio_map_reg(sachip, offset); + u32 mask = sa1111_gpio_map_bit(offset); + + spin_lock_irqsave(&sachip->lock, flags); + sa1111_gpio_modify(reg + SA1111_GPIO_PXDWR, mask, value ? mask : 0); + sa1111_gpio_modify(reg + SA1111_GPIO_PXSSR, mask, value ? mask : 0); + sa1111_gpio_modify(reg + SA1111_GPIO_PXDDR, mask, 0); + sa1111_gpio_modify(reg + SA1111_GPIO_PXSDR, mask, 0); + spin_unlock_irqrestore(&sachip->lock, flags); + + return 0; +} + +static int sa1111_gpio_get(struct gpio_chip *gc, unsigned offset) +{ + struct sa1111 *sachip = gc_to_sa1111(gc); + void __iomem *reg = sa1111_gpio_map_reg(sachip, offset); + u32 mask = sa1111_gpio_map_bit(offset); + + return !!(readl_relaxed(reg + SA1111_GPIO_PXDRR) & mask); +} + +static void sa1111_gpio_set(struct gpio_chip *gc, unsigned offset, int value) +{ + struct sa1111 *sachip = gc_to_sa1111(gc); + unsigned long flags; + void __iomem *reg = sa1111_gpio_map_reg(sachip, offset); + u32 mask = sa1111_gpio_map_bit(offset); + + spin_lock_irqsave(&sachip->lock, flags); + sa1111_gpio_modify(reg + SA1111_GPIO_PXDWR, mask, value ? mask : 0); + sa1111_gpio_modify(reg + SA1111_GPIO_PXSSR, mask, value ? mask : 0); + spin_unlock_irqrestore(&sachip->lock, flags); +} + +static void sa1111_gpio_set_multiple(struct gpio_chip *gc, unsigned long *mask, + unsigned long *bits) +{ + struct sa1111 *sachip = gc_to_sa1111(gc); + unsigned long flags; + void __iomem *reg = sachip->base + SA1111_GPIO; + u32 msk, val; + + msk = *mask; + val = *bits; + + spin_lock_irqsave(&sachip->lock, flags); + sa1111_gpio_modify(reg + SA1111_GPIO_PADWR, msk & 15, val); + sa1111_gpio_modify(reg + SA1111_GPIO_PASSR, msk & 15, val); + sa1111_gpio_modify(reg + SA1111_GPIO_PBDWR, (msk >> 4) & 255, val >> 4); + sa1111_gpio_modify(reg + SA1111_GPIO_PBSSR, (msk >> 4) & 255, val >> 4); + sa1111_gpio_modify(reg + SA1111_GPIO_PCDWR, (msk >> 12) & 255, val >> 12); + sa1111_gpio_modify(reg + SA1111_GPIO_PCSSR, (msk >> 12) & 255, val >> 12); + spin_unlock_irqrestore(&sachip->lock, flags); +} + +static int sa1111_gpio_to_irq(struct gpio_chip *gc, unsigned offset) +{ + struct sa1111 *sachip = gc_to_sa1111(gc); + + return sachip->irq_base + offset; +} + +static int sa1111_setup_gpios(struct sa1111 *sachip) +{ + sachip->gc.label = "sa1111"; + sachip->gc.parent = sachip->dev; + sachip->gc.owner = THIS_MODULE; + sachip->gc.get_direction = sa1111_gpio_get_direction; + sachip->gc.direction_input = sa1111_gpio_direction_input; + sachip->gc.direction_output = sa1111_gpio_direction_output; + sachip->gc.get = sa1111_gpio_get; + sachip->gc.set = sa1111_gpio_set; + sachip->gc.set_multiple = sa1111_gpio_set_multiple; + sachip->gc.to_irq = sa1111_gpio_to_irq; + sachip->gc.base = -1; + sachip->gc.ngpio = 18; + + return devm_gpiochip_add_data(sachip->dev, &sachip->gc, sachip); +} + /* * Bring the SA1111 out of reset. This requires a set procedure: * 1. nRESET asserted (by hardware) @@ -607,7 +691,7 @@ sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac, static void sa1111_dev_release(struct device *_dev) { - struct sa1111_dev *dev = SA1111_DEV(_dev); + struct sa1111_dev *dev = to_sa1111_device(_dev); kfree(dev); } @@ -696,19 +780,17 @@ static int __sa1111_probe(struct device *me, struct resource *mem, int irq) if (!pd) return -EINVAL; - sachip = kzalloc(sizeof(struct sa1111), GFP_KERNEL); + sachip = devm_kzalloc(me, sizeof(struct sa1111), GFP_KERNEL); if (!sachip) return -ENOMEM; - sachip->clk = clk_get(me, "SA1111_CLK"); - if (IS_ERR(sachip->clk)) { - ret = PTR_ERR(sachip->clk); - goto err_free; - } + sachip->clk = devm_clk_get(me, "SA1111_CLK"); + if (IS_ERR(sachip->clk)) + return PTR_ERR(sachip->clk); ret = clk_prepare(sachip->clk); if (ret) - goto err_clkput; + return ret; spin_lock_init(&sachip->lock); @@ -754,9 +836,14 @@ static int __sa1111_probe(struct device *me, struct resource *mem, int irq) if (sachip->irq != NO_IRQ) { ret = sa1111_setup_irq(sachip, pd->irq_base); if (ret) - goto err_unmap; + goto err_clk; } + /* Setup the GPIOs - should really be done after the IRQ setup */ + ret = sa1111_setup_gpios(sachip); + if (ret) + goto err_irq; + #ifdef CONFIG_ARCH_SA1100 { unsigned int val; @@ -799,20 +886,22 @@ static int __sa1111_probe(struct device *me, struct resource *mem, int irq) return 0; + err_irq: + sa1111_remove_irq(sachip); + err_clk: + clk_disable(sachip->clk); err_unmap: iounmap(sachip->base); err_clk_unprep: clk_unprepare(sachip->clk); - err_clkput: - clk_put(sachip->clk); - err_free: - kfree(sachip); return ret; } static int sa1111_remove_one(struct device *dev, void *data) { - struct sa1111_dev *sadev = SA1111_DEV(dev); + struct sa1111_dev *sadev = to_sa1111_device(dev); + if (dev->bus != &sa1111_bus_type) + return 0; device_del(&sadev->dev); release_resource(&sadev->res); put_device(&sadev->dev); @@ -821,29 +910,14 @@ static int sa1111_remove_one(struct device *dev, void *data) static void __sa1111_remove(struct sa1111 *sachip) { - void __iomem *irqbase = sachip->base + SA1111_INTC; - device_for_each_child(sachip->dev, NULL, sa1111_remove_one); - /* disable all IRQs */ - sa1111_writel(0, irqbase + SA1111_INTEN0); - sa1111_writel(0, irqbase + SA1111_INTEN1); - sa1111_writel(0, irqbase + SA1111_WAKEEN0); - sa1111_writel(0, irqbase + SA1111_WAKEEN1); + sa1111_remove_irq(sachip); clk_disable(sachip->clk); clk_unprepare(sachip->clk); - if (sachip->irq != NO_IRQ) { - irq_set_chained_handler_and_data(sachip->irq, NULL, NULL); - irq_free_descs(sachip->irq_base, SA1111_IRQ_NR); - - release_mem_region(sachip->phys + SA1111_INTC, 512); - } - iounmap(sachip->base); - clk_put(sachip->clk); - kfree(sachip); } struct sa1111_save_data { @@ -869,9 +943,9 @@ struct sa1111_save_data { #ifdef CONFIG_PM -static int sa1111_suspend(struct platform_device *dev, pm_message_t state) +static int sa1111_suspend_noirq(struct device *dev) { - struct sa1111 *sachip = platform_get_drvdata(dev); + struct sa1111 *sachip = dev_get_drvdata(dev); struct sa1111_save_data *save; unsigned long flags; unsigned int val; @@ -934,9 +1008,9 @@ static int sa1111_suspend(struct platform_device *dev, pm_message_t state) * restored by their respective drivers, and must be called * via LDM after this function. */ -static int sa1111_resume(struct platform_device *dev) +static int sa1111_resume_noirq(struct device *dev) { - struct sa1111 *sachip = platform_get_drvdata(dev); + struct sa1111 *sachip = dev_get_drvdata(dev); struct sa1111_save_data *save; unsigned long flags, id; void __iomem *base; @@ -952,7 +1026,7 @@ static int sa1111_resume(struct platform_device *dev) id = sa1111_readl(sachip->base + SA1111_SKID); if ((id & SKID_ID_MASK) != SKID_SA1111_ID) { __sa1111_remove(sachip); - platform_set_drvdata(dev, NULL); + dev_set_drvdata(dev, NULL); kfree(save); return 0; } @@ -1003,8 +1077,8 @@ static int sa1111_resume(struct platform_device *dev) } #else -#define sa1111_suspend NULL -#define sa1111_resume NULL +#define sa1111_suspend_noirq NULL +#define sa1111_resume_noirq NULL #endif static int sa1111_probe(struct platform_device *pdev) @@ -1017,7 +1091,7 @@ static int sa1111_probe(struct platform_device *pdev) return -EINVAL; irq = platform_get_irq(pdev, 0); if (irq < 0) - return -ENXIO; + return irq; return __sa1111_probe(&pdev->dev, mem, irq); } @@ -1038,6 +1112,11 @@ static int sa1111_remove(struct platform_device *pdev) return 0; } +static struct dev_pm_ops sa1111_pm_ops = { + .suspend_noirq = sa1111_suspend_noirq, + .resume_noirq = sa1111_resume_noirq, +}; + /* * Not sure if this should be on the system bus or not yet. * We really want some way to register a system device at @@ -1050,10 +1129,9 @@ static int sa1111_remove(struct platform_device *pdev) static struct platform_driver sa1111_device_driver = { .probe = sa1111_probe, .remove = sa1111_remove, - .suspend = sa1111_suspend, - .resume = sa1111_resume, .driver = { .name = "sa1111", + .pm = &sa1111_pm_ops, }, }; @@ -1279,6 +1357,14 @@ void sa1111_disable_device(struct sa1111_dev *sadev) } EXPORT_SYMBOL(sa1111_disable_device); +int sa1111_get_irq(struct sa1111_dev *sadev, unsigned num) +{ + if (num >= ARRAY_SIZE(sadev->irq)) + return -EINVAL; + return sadev->irq[num]; +} +EXPORT_SYMBOL_GPL(sa1111_get_irq); + /* * SA1111 "Register Access Bus." * @@ -1287,7 +1373,7 @@ EXPORT_SYMBOL(sa1111_disable_device); */ static int sa1111_match(struct device *_dev, struct device_driver *_drv) { - struct sa1111_dev *dev = SA1111_DEV(_dev); + struct sa1111_dev *dev = to_sa1111_device(_dev); struct sa1111_driver *drv = SA1111_DRV(_drv); return !!(dev->devid & drv->devid); @@ -1295,7 +1381,7 @@ static int sa1111_match(struct device *_dev, struct device_driver *_drv) static int sa1111_bus_suspend(struct device *dev, pm_message_t state) { - struct sa1111_dev *sadev = SA1111_DEV(dev); + struct sa1111_dev *sadev = to_sa1111_device(dev); struct sa1111_driver *drv = SA1111_DRV(dev->driver); int ret = 0; @@ -1306,7 +1392,7 @@ static int sa1111_bus_suspend(struct device *dev, pm_message_t state) static int sa1111_bus_resume(struct device *dev) { - struct sa1111_dev *sadev = SA1111_DEV(dev); + struct sa1111_dev *sadev = to_sa1111_device(dev); struct sa1111_driver *drv = SA1111_DRV(dev->driver); int ret = 0; @@ -1320,12 +1406,12 @@ static void sa1111_bus_shutdown(struct device *dev) struct sa1111_driver *drv = SA1111_DRV(dev->driver); if (drv && drv->shutdown) - drv->shutdown(SA1111_DEV(dev)); + drv->shutdown(to_sa1111_device(dev)); } static int sa1111_bus_probe(struct device *dev) { - struct sa1111_dev *sadev = SA1111_DEV(dev); + struct sa1111_dev *sadev = to_sa1111_device(dev); struct sa1111_driver *drv = SA1111_DRV(dev->driver); int ret = -ENODEV; @@ -1336,7 +1422,7 @@ static int sa1111_bus_probe(struct device *dev) static int sa1111_bus_remove(struct device *dev) { - struct sa1111_dev *sadev = SA1111_DEV(dev); + struct sa1111_dev *sadev = to_sa1111_device(dev); struct sa1111_driver *drv = SA1111_DRV(dev->driver); int ret = 0; @@ -1401,7 +1487,7 @@ static int sa1111_needs_bounce(struct device *dev, dma_addr_t addr, size_t size) static int sa1111_notifier_call(struct notifier_block *n, unsigned long action, void *data) { - struct sa1111_dev *dev = SA1111_DEV(data); + struct sa1111_dev *dev = to_sa1111_device(data); switch (action) { case BUS_NOTIFY_ADD_DEVICE: diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 01986deef7c5..36cc7cc012f9 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -28,7 +28,7 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m -CONFIG_CPU_FREQ_GOV_SCHEDUTIL=m +CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y CONFIG_CPUFREQ_DT=y CONFIG_CPU_IDLE=y CONFIG_ARM_EXYNOS_CPUIDLE=y diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index 9083399a8ab1..5f013c9fc1ed 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -22,14 +22,13 @@ CONFIG_ARCH_MULTI_V4T=y CONFIG_ARCH_MULTI_V5=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_MXC=y -CONFIG_MACH_SCB9328=y -CONFIG_MACH_APF9328=y CONFIG_MACH_MX21ADS=y CONFIG_MACH_MX27ADS=y CONFIG_MACH_MX27_3DS=y CONFIG_MACH_IMX27_VISSTRIM_M10=y CONFIG_MACH_PCA100=y CONFIG_MACH_IMX27_DT=y +CONFIG_SOC_IMX1=y CONFIG_SOC_IMX25=y CONFIG_PREEMPT=y CONFIG_AEABI=y diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig index 71b42e66488a..78cd2f197e01 100644 --- a/arch/arm/configs/keystone_defconfig +++ b/arch/arm/configs/keystone_defconfig @@ -161,6 +161,7 @@ CONFIG_USB_MON=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_DWC3=y +CONFIG_NOP_USB_XCEIV=y CONFIG_KEYSTONE_USB_PHY=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y diff --git a/arch/arm/configs/multi_v4t_defconfig b/arch/arm/configs/multi_v4t_defconfig index 433eebb4103f..9a6390c172d6 100644 --- a/arch/arm/configs/multi_v4t_defconfig +++ b/arch/arm/configs/multi_v4t_defconfig @@ -20,9 +20,7 @@ CONFIG_INTEGRATOR_CM720T=y CONFIG_INTEGRATOR_CM920T=y CONFIG_INTEGRATOR_CM922T_XA10=y CONFIG_ARCH_MXC=y -CONFIG_MACH_SCB9328=y -CONFIG_MACH_APF9328=y -CONFIG_MACH_IMX1_DT=y +CONFIG_SOC_IMX1=y CONFIG_ARCH_NSPIRE=y CONFIG_AEABI=y # CONFIG_ATAGS is not set diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 2c8665cd9dc5..58459105cadc 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -135,7 +135,7 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m -CONFIG_CPU_FREQ_GOV_SCHEDUTIL=m +CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y CONFIG_QORIQ_CPUFREQ=y CONFIG_CPU_IDLE=y CONFIG_ARM_CPUIDLE=y @@ -781,7 +781,7 @@ CONFIG_MXS_DMA=y CONFIG_DMA_BCM2835=y CONFIG_DMA_OMAP=y CONFIG_QCOM_BAM_DMA=y -CONFIG_XILINX_VDMA=y +CONFIG_XILINX_DMA=y CONFIG_DMA_SUN6I=y CONFIG_STAGING=y CONFIG_SENSORS_ISL29018=y diff --git a/arch/arm/crypto/aes-ce-glue.c b/arch/arm/crypto/aes-ce-glue.c index da3c0428507b..aef022a87c53 100644 --- a/arch/arm/crypto/aes-ce-glue.c +++ b/arch/arm/crypto/aes-ce-glue.c @@ -284,7 +284,7 @@ static int ctr_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE); } - if (nbytes) { + if (walk.nbytes % AES_BLOCK_SIZE) { u8 *tdst = walk.dst.virt.addr + blocks * AES_BLOCK_SIZE; u8 *tsrc = walk.src.virt.addr + blocks * AES_BLOCK_SIZE; u8 __aligned(8) tail[AES_BLOCK_SIZE]; diff --git a/arch/arm/include/asm/arch_gicv3.h b/arch/arm/include/asm/arch_gicv3.h index e08d15184056..a8088290b778 100644 --- a/arch/arm/include/asm/arch_gicv3.h +++ b/arch/arm/include/asm/arch_gicv3.h @@ -22,9 +22,7 @@ #include <linux/io.h> #include <asm/barrier.h> - -#define __ACCESS_CP15(CRn, Op1, CRm, Op2) p15, Op1, %0, CRn, CRm, Op2 -#define __ACCESS_CP15_64(Op1, CRm) p15, Op1, %Q0, %R0, CRm +#include <asm/cp15.h> #define ICC_EOIR1 __ACCESS_CP15(c12, 0, c12, 1) #define ICC_DIR __ACCESS_CP15(c12, 0, c11, 1) @@ -34,6 +32,7 @@ #define ICC_CTLR __ACCESS_CP15(c12, 0, c12, 4) #define ICC_SRE __ACCESS_CP15(c12, 0, c12, 5) #define ICC_IGRPEN1 __ACCESS_CP15(c12, 0, c12, 7) +#define ICC_BPR1 __ACCESS_CP15(c12, 0, c12, 3) #define ICC_HSRE __ACCESS_CP15(c12, 4, c9, 5) @@ -98,65 +97,131 @@ #define ICH_AP1R2 __AP1Rx(2) #define ICH_AP1R3 __AP1Rx(3) +/* A32-to-A64 mappings used by VGIC save/restore */ + +#define CPUIF_MAP(a32, a64) \ +static inline void write_ ## a64(u32 val) \ +{ \ + write_sysreg(val, a32); \ +} \ +static inline u32 read_ ## a64(void) \ +{ \ + return read_sysreg(a32); \ +} \ + +#define CPUIF_MAP_LO_HI(a32lo, a32hi, a64) \ +static inline void write_ ## a64(u64 val) \ +{ \ + write_sysreg(lower_32_bits(val), a32lo);\ + write_sysreg(upper_32_bits(val), a32hi);\ +} \ +static inline u64 read_ ## a64(void) \ +{ \ + u64 val = read_sysreg(a32lo); \ + \ + val |= (u64)read_sysreg(a32hi) << 32; \ + \ + return val; \ +} + +CPUIF_MAP(ICH_HCR, ICH_HCR_EL2) +CPUIF_MAP(ICH_VTR, ICH_VTR_EL2) +CPUIF_MAP(ICH_MISR, ICH_MISR_EL2) +CPUIF_MAP(ICH_EISR, ICH_EISR_EL2) +CPUIF_MAP(ICH_ELSR, ICH_ELSR_EL2) +CPUIF_MAP(ICH_VMCR, ICH_VMCR_EL2) +CPUIF_MAP(ICH_AP0R3, ICH_AP0R3_EL2) +CPUIF_MAP(ICH_AP0R2, ICH_AP0R2_EL2) +CPUIF_MAP(ICH_AP0R1, ICH_AP0R1_EL2) +CPUIF_MAP(ICH_AP0R0, ICH_AP0R0_EL2) +CPUIF_MAP(ICH_AP1R3, ICH_AP1R3_EL2) +CPUIF_MAP(ICH_AP1R2, ICH_AP1R2_EL2) +CPUIF_MAP(ICH_AP1R1, ICH_AP1R1_EL2) +CPUIF_MAP(ICH_AP1R0, ICH_AP1R0_EL2) +CPUIF_MAP(ICC_HSRE, ICC_SRE_EL2) +CPUIF_MAP(ICC_SRE, ICC_SRE_EL1) + +CPUIF_MAP_LO_HI(ICH_LR15, ICH_LRC15, ICH_LR15_EL2) +CPUIF_MAP_LO_HI(ICH_LR14, ICH_LRC14, ICH_LR14_EL2) +CPUIF_MAP_LO_HI(ICH_LR13, ICH_LRC13, ICH_LR13_EL2) +CPUIF_MAP_LO_HI(ICH_LR12, ICH_LRC12, ICH_LR12_EL2) +CPUIF_MAP_LO_HI(ICH_LR11, ICH_LRC11, ICH_LR11_EL2) +CPUIF_MAP_LO_HI(ICH_LR10, ICH_LRC10, ICH_LR10_EL2) +CPUIF_MAP_LO_HI(ICH_LR9, ICH_LRC9, ICH_LR9_EL2) +CPUIF_MAP_LO_HI(ICH_LR8, ICH_LRC8, ICH_LR8_EL2) +CPUIF_MAP_LO_HI(ICH_LR7, ICH_LRC7, ICH_LR7_EL2) +CPUIF_MAP_LO_HI(ICH_LR6, ICH_LRC6, ICH_LR6_EL2) +CPUIF_MAP_LO_HI(ICH_LR5, ICH_LRC5, ICH_LR5_EL2) +CPUIF_MAP_LO_HI(ICH_LR4, ICH_LRC4, ICH_LR4_EL2) +CPUIF_MAP_LO_HI(ICH_LR3, ICH_LRC3, ICH_LR3_EL2) +CPUIF_MAP_LO_HI(ICH_LR2, ICH_LRC2, ICH_LR2_EL2) +CPUIF_MAP_LO_HI(ICH_LR1, ICH_LRC1, ICH_LR1_EL2) +CPUIF_MAP_LO_HI(ICH_LR0, ICH_LRC0, ICH_LR0_EL2) + +#define read_gicreg(r) read_##r() +#define write_gicreg(v, r) write_##r(v) + /* Low-level accessors */ static inline void gic_write_eoir(u32 irq) { - asm volatile("mcr " __stringify(ICC_EOIR1) : : "r" (irq)); + write_sysreg(irq, ICC_EOIR1); isb(); } static inline void gic_write_dir(u32 val) { - asm volatile("mcr " __stringify(ICC_DIR) : : "r" (val)); + write_sysreg(val, ICC_DIR); isb(); } static inline u32 gic_read_iar(void) { - u32 irqstat; + u32 irqstat = read_sysreg(ICC_IAR1); - asm volatile("mrc " __stringify(ICC_IAR1) : "=r" (irqstat)); dsb(sy); + return irqstat; } static inline void gic_write_pmr(u32 val) { - asm volatile("mcr " __stringify(ICC_PMR) : : "r" (val)); + write_sysreg(val, ICC_PMR); } static inline void gic_write_ctlr(u32 val) { - asm volatile("mcr " __stringify(ICC_CTLR) : : "r" (val)); + write_sysreg(val, ICC_CTLR); isb(); } static inline void gic_write_grpen1(u32 val) { - asm volatile("mcr " __stringify(ICC_IGRPEN1) : : "r" (val)); + write_sysreg(val, ICC_IGRPEN1); isb(); } static inline void gic_write_sgi1r(u64 val) { - asm volatile("mcrr " __stringify(ICC_SGI1R) : : "r" (val)); + write_sysreg(val, ICC_SGI1R); } static inline u32 gic_read_sre(void) { - u32 val; - - asm volatile("mrc " __stringify(ICC_SRE) : "=r" (val)); - return val; + return read_sysreg(ICC_SRE); } static inline void gic_write_sre(u32 val) { - asm volatile("mcr " __stringify(ICC_SRE) : : "r" (val)); + write_sysreg(val, ICC_SRE); isb(); } +static inline void gic_write_bpr1(u32 val) +{ + write_sysreg(val, ICC_BPR1); +} + /* * Even in 32bit systems that use LPAE, there is no guarantee that the I/O * interface provides true 64bit atomic accesses, so using strd/ldrd doesn't diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 4eaea2173bf8..68b06f9c65de 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -159,7 +159,11 @@ .endm .macro save_and_disable_irqs_notrace, oldcpsr +#ifdef CONFIG_CPU_V7M + mrs \oldcpsr, primask +#else mrs \oldcpsr, cpsr +#endif disable_irq_notrace .endm diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index 9156fc303afd..bdd283bc5842 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -501,21 +501,4 @@ static inline void set_kernel_text_ro(void) { } void flush_uprobe_xol_access(struct page *page, unsigned long uaddr, void *kaddr, unsigned long len); -/** - * secure_flush_area - ensure coherency across the secure boundary - * @addr: virtual address - * @size: size of region - * - * Ensure that the specified area of memory is coherent across the secure - * boundary from the non-secure side. This is used when calling secure - * firmware where the secure firmware does not ensure coherency. - */ -static inline void secure_flush_area(const void *addr, size_t size) -{ - phys_addr_t phys = __pa(addr); - - __cpuc_flush_dcache_area((void *)addr, size); - outer_flush_range(phys, phys + size); -} - #endif diff --git a/arch/arm/include/asm/cachetype.h b/arch/arm/include/asm/cachetype.h index 7ea78144ae22..01509ae0bbec 100644 --- a/arch/arm/include/asm/cachetype.h +++ b/arch/arm/include/asm/cachetype.h @@ -56,4 +56,43 @@ static inline unsigned int __attribute__((pure)) cacheid_is(unsigned int mask) (~__CACHEID_NEVER & __CACHEID_ARCH_MIN & mask & cacheid); } +#define CSSELR_ICACHE 1 +#define CSSELR_DCACHE 0 + +#define CSSELR_L1 (0 << 1) +#define CSSELR_L2 (1 << 1) +#define CSSELR_L3 (2 << 1) +#define CSSELR_L4 (3 << 1) +#define CSSELR_L5 (4 << 1) +#define CSSELR_L6 (5 << 1) +#define CSSELR_L7 (6 << 1) + +#ifndef CONFIG_CPU_V7M +static inline void set_csselr(unsigned int cache_selector) +{ + asm volatile("mcr p15, 2, %0, c0, c0, 0" : : "r" (cache_selector)); +} + +static inline unsigned int read_ccsidr(void) +{ + unsigned int val; + + asm volatile("mrc p15, 1, %0, c0, c0, 0" : "=r" (val)); + return val; +} +#else /* CONFIG_CPU_V7M */ +#include <linux/io.h> +#include "asm/v7m.h" + +static inline void set_csselr(unsigned int cache_selector) +{ + writel(cache_selector, BASEADDR_V7M_SCB + V7M_SCB_CTR); +} + +static inline unsigned int read_ccsidr(void) +{ + return readl(BASEADDR_V7M_SCB + V7M_SCB_CCSIDR); +} +#endif + #endif diff --git a/arch/arm/include/asm/clocksource.h b/arch/arm/include/asm/clocksource.h new file mode 100644 index 000000000000..0b350a7e26f3 --- /dev/null +++ b/arch/arm/include/asm/clocksource.h @@ -0,0 +1,8 @@ +#ifndef _ASM_CLOCKSOURCE_H +#define _ASM_CLOCKSOURCE_H + +struct arch_clocksource_data { + bool vdso_direct; /* Usable for direct VDSO access? */ +}; + +#endif diff --git a/arch/arm/include/asm/cp15.h b/arch/arm/include/asm/cp15.h index c3f11524f10c..dbdbce1b3a72 100644 --- a/arch/arm/include/asm/cp15.h +++ b/arch/arm/include/asm/cp15.h @@ -49,6 +49,21 @@ #ifdef CONFIG_CPU_CP15 +#define __ACCESS_CP15(CRn, Op1, CRm, Op2) \ + "mrc", "mcr", __stringify(p15, Op1, %0, CRn, CRm, Op2), u32 +#define __ACCESS_CP15_64(Op1, CRm) \ + "mrrc", "mcrr", __stringify(p15, Op1, %Q0, %R0, CRm), u64 + +#define __read_sysreg(r, w, c, t) ({ \ + t __val; \ + asm volatile(r " " c : "=r" (__val)); \ + __val; \ +}) +#define read_sysreg(...) __read_sysreg(__VA_ARGS__) + +#define __write_sysreg(v, r, w, c, t) asm volatile(w " " c : : "r" ((t)(v))) +#define write_sysreg(v, ...) __write_sysreg(v, __VA_ARGS__) + extern unsigned long cr_alignment; /* defined in entry-armv.S */ static inline unsigned long get_cr(void) diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index 1ee94c716a7f..522b5feb4eaa 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -55,11 +55,13 @@ #define MPIDR_LEVEL_BITS 8 #define MPIDR_LEVEL_MASK ((1 << MPIDR_LEVEL_BITS) - 1) +#define MPIDR_LEVEL_SHIFT(level) (MPIDR_LEVEL_BITS * level) #define MPIDR_AFFINITY_LEVEL(mpidr, level) \ ((mpidr >> (MPIDR_LEVEL_BITS * level)) & MPIDR_LEVEL_MASK) #define ARM_CPU_IMP_ARM 0x41 +#define ARM_CPU_IMP_DEC 0x44 #define ARM_CPU_IMP_INTEL 0x69 /* ARM implemented processors */ @@ -76,6 +78,17 @@ #define ARM_CPU_PART_CORTEX_A15 0x4100c0f0 #define ARM_CPU_PART_MASK 0xff00fff0 +/* DEC implemented cores */ +#define ARM_CPU_PART_SA1100 0x4400a110 + +/* Intel implemented cores */ +#define ARM_CPU_PART_SA1110 0x6900b110 +#define ARM_CPU_REV_SA1110_A0 0 +#define ARM_CPU_REV_SA1110_B0 4 +#define ARM_CPU_REV_SA1110_B1 5 +#define ARM_CPU_REV_SA1110_B2 6 +#define ARM_CPU_REV_SA1110_B4 8 + #define ARM_CPU_XSCALE_ARCH_MASK 0xe000 #define ARM_CPU_XSCALE_ARCH_V1 0x2000 #define ARM_CPU_XSCALE_ARCH_V2 0x4000 @@ -152,6 +165,11 @@ static inline unsigned int __attribute_const__ read_cpuid_id(void) return read_cpuid(CPUID_ID); } +static inline unsigned int __attribute_const__ read_cpuid_cachetype(void) +{ + return read_cpuid(CPUID_CACHETYPE); +} + #elif defined(CONFIG_CPU_V7M) static inline unsigned int __attribute_const__ read_cpuid_id(void) @@ -159,6 +177,11 @@ static inline unsigned int __attribute_const__ read_cpuid_id(void) return readl(BASEADDR_V7M_SCB + V7M_SCB_CPUID); } +static inline unsigned int __attribute_const__ read_cpuid_cachetype(void) +{ + return readl(BASEADDR_V7M_SCB + V7M_SCB_CTR); +} + #else /* ifdef CONFIG_CPU_CP15 / elif defined(CONFIG_CPU_V7M) */ static inline unsigned int __attribute_const__ read_cpuid_id(void) @@ -173,6 +196,11 @@ static inline unsigned int __attribute_const__ read_cpuid_implementor(void) return (read_cpuid_id() & 0xFF000000) >> 24; } +static inline unsigned int __attribute_const__ read_cpuid_revision(void) +{ + return read_cpuid_id() & 0x0000000f; +} + /* * The CPU part number is meaningless without referring to the CPU * implementer: implementers are free to define their own part numbers @@ -193,11 +221,6 @@ static inline unsigned int __attribute_const__ xscale_cpu_arch_version(void) return read_cpuid_id() & ARM_CPU_XSCALE_ARCH_MASK; } -static inline unsigned int __attribute_const__ read_cpuid_cachetype(void) -{ - return read_cpuid(CPUID_CACHETYPE); -} - static inline unsigned int __attribute_const__ read_cpuid_tcmstatus(void) { return read_cpuid(CPUID_TCM); @@ -208,6 +231,10 @@ static inline unsigned int __attribute_const__ read_cpuid_mpidr(void) return read_cpuid(CPUID_MPIDR); } +/* StrongARM-11x0 CPUs */ +#define cpu_is_sa1100() (read_cpuid_part() == ARM_CPU_PART_SA1100) +#define cpu_is_sa1110() (read_cpuid_part() == ARM_CPU_PART_SA1110) + /* * Intel's XScale3 core supports some v6 features (supersections, L2) * but advertises itself as v5 as it does not support the v6 ISA. For diff --git a/arch/arm/include/asm/delay.h b/arch/arm/include/asm/delay.h index b7a428154355..b1ce037e4380 100644 --- a/arch/arm/include/asm/delay.h +++ b/arch/arm/include/asm/delay.h @@ -10,7 +10,7 @@ #include <asm/param.h> /* HZ */ #define MAX_UDELAY_MS 2 -#define UDELAY_MULT UL(2047 * HZ + 483648 * HZ / 1000000) +#define UDELAY_MULT UL(2147 * HZ + 483648 * HZ / 1000000) #define UDELAY_SHIFT 31 #ifndef __ASSEMBLY__ diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index d009f7911ffc..bf02dbd9ccda 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -111,7 +111,7 @@ static inline dma_addr_t virt_to_dma(struct device *dev, void *addr) /* The ARM override for dma_max_pfn() */ static inline unsigned long dma_max_pfn(struct device *dev) { - return PHYS_PFN_OFFSET + dma_to_pfn(dev, *dev->dma_mask); + return dma_to_pfn(dev, *dev->dma_mask); } #define dma_max_pfn(dev) dma_max_pfn(dev) diff --git a/arch/arm/include/asm/flat.h b/arch/arm/include/asm/flat.h index e847d23351ed..acf1d14b89a6 100644 --- a/arch/arm/include/asm/flat.h +++ b/arch/arm/include/asm/flat.h @@ -8,8 +8,9 @@ #define flat_argvp_envp_on_stack() 1 #define flat_old_ram_flag(flags) (flags) #define flat_reloc_valid(reloc, size) ((reloc) <= (size)) -#define flat_get_addr_from_rp(rp, relval, flags, persistent) ((void)persistent,get_unaligned(rp)) -#define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp) +#define flat_get_addr_from_rp(rp, relval, flags, persistent) \ + ({ unsigned long __val; __get_user_unaligned(__val, rp); __val; }) +#define flat_put_addr_at_rp(rp, val, relval) __put_user_unaligned(val, rp) #define flat_get_relocate_addr(rel) (rel) #define flat_set_persistent(relval, p) 0 diff --git a/arch/arm/include/asm/glue-cache.h b/arch/arm/include/asm/glue-cache.h index cab07f69382d..01c3d92624e5 100644 --- a/arch/arm/include/asm/glue-cache.h +++ b/arch/arm/include/asm/glue-cache.h @@ -118,11 +118,7 @@ #endif #if defined(CONFIG_CPU_V7M) -# ifdef _CACHE # define MULTI_CACHE 1 -# else -# define _CACHE nop -# endif #endif #if !defined(_CACHE) && !defined(MULTI_CACHE) diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 3a5ec1c25659..736292b42fca 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -87,6 +87,15 @@ #define L310_CACHE_ID_RTL_R3P2 0x08 #define L310_CACHE_ID_RTL_R3P3 0x09 +#define L2X0_EVENT_CNT_CTRL_ENABLE BIT(0) + +#define L2X0_EVENT_CNT_CFG_SRC_SHIFT 2 +#define L2X0_EVENT_CNT_CFG_SRC_MASK 0xf +#define L2X0_EVENT_CNT_CFG_SRC_DISABLED 0 +#define L2X0_EVENT_CNT_CFG_INT_DISABLED 0 +#define L2X0_EVENT_CNT_CFG_INT_INCR 1 +#define L2X0_EVENT_CNT_CFG_INT_OVERFLOW 2 + /* L2C auxiliary control register - bits common to L2C-210/220/310 */ #define L2C_AUX_CTRL_WAY_SIZE_SHIFT 17 #define L2C_AUX_CTRL_WAY_SIZE_MASK (7 << 17) @@ -157,6 +166,16 @@ static inline int l2x0_of_init(u32 aux_val, u32 aux_mask) } #endif +#ifdef CONFIG_CACHE_L2X0_PMU +void l2x0_pmu_register(void __iomem *base, u32 part); +void l2x0_pmu_suspend(void); +void l2x0_pmu_resume(void); +#else +static inline void l2x0_pmu_register(void __iomem *base, u32 part) {} +static inline void l2x0_pmu_suspend(void) {} +static inline void l2x0_pmu_resume(void) {} +#endif + struct l2x0_regs { unsigned long phy_base; unsigned long aux_ctrl; diff --git a/arch/arm/include/asm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h index 7c2bbc7f0be1..8979fa3bbf2d 100644 --- a/arch/arm/include/asm/hardware/sa1111.h +++ b/arch/arm/include/asm/hardware/sa1111.h @@ -420,7 +420,7 @@ struct sa1111_dev { u64 dma_mask; }; -#define SA1111_DEV(_d) container_of((_d), struct sa1111_dev, dev) +#define to_sa1111_device(x) container_of(x, struct sa1111_dev, dev) #define sa1111_get_drvdata(d) dev_get_drvdata(&(d)->dev) #define sa1111_set_drvdata(d,p) dev_set_drvdata(&(d)->dev, p) @@ -446,6 +446,8 @@ struct sa1111_driver { int sa1111_enable_device(struct sa1111_dev *); void sa1111_disable_device(struct sa1111_dev *); +int sa1111_get_irq(struct sa1111_dev *, unsigned num); + unsigned int sa1111_pll_clock(struct sa1111_dev *); #define SA1111_AUDIO_ACLINK 0 diff --git a/arch/arm/include/asm/hw_breakpoint.h b/arch/arm/include/asm/hw_breakpoint.h index 8e427c7b4425..afcaf8bf971b 100644 --- a/arch/arm/include/asm/hw_breakpoint.h +++ b/arch/arm/include/asm/hw_breakpoint.h @@ -114,7 +114,6 @@ struct notifier_block; struct perf_event; struct pmu; -extern struct pmu perf_ops_bp; extern int arch_bp_generic_fields(struct arch_hw_breakpoint_ctrl ctrl, int *gen_len, int *gen_type); extern int arch_check_bp_in_kernelspace(struct perf_event *bp); diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h index 58faff5f1eb2..d7ea6bcb29bf 100644 --- a/arch/arm/include/asm/kvm_asm.h +++ b/arch/arm/include/asm/kvm_asm.h @@ -21,6 +21,10 @@ #include <asm/virt.h> +#define ARM_EXIT_WITH_ABORT_BIT 31 +#define ARM_EXCEPTION_CODE(x) ((x) & ~(1U << ARM_EXIT_WITH_ABORT_BIT)) +#define ARM_ABORT_PENDING(x) !!((x) & (1U << ARM_EXIT_WITH_ABORT_BIT)) + #define ARM_EXCEPTION_RESET 0 #define ARM_EXCEPTION_UNDEFINED 1 #define ARM_EXCEPTION_SOFTWARE 2 @@ -68,6 +72,9 @@ extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu); extern void __init_stage2_translation(void); extern void __kvm_hyp_reset(unsigned long); + +extern u64 __vgic_v3_get_ich_vtr_el2(void); +extern void __vgic_v3_init_lrs(void); #endif #endif /* __ARM_KVM_ASM_H__ */ diff --git a/arch/arm/include/asm/kvm_emulate.h b/arch/arm/include/asm/kvm_emulate.h index ee5328fc4b06..9a8a45aaf19a 100644 --- a/arch/arm/include/asm/kvm_emulate.h +++ b/arch/arm/include/asm/kvm_emulate.h @@ -40,18 +40,29 @@ static inline void vcpu_set_reg(struct kvm_vcpu *vcpu, u8 reg_num, *vcpu_reg(vcpu, reg_num) = val; } -bool kvm_condition_valid(struct kvm_vcpu *vcpu); -void kvm_skip_instr(struct kvm_vcpu *vcpu, bool is_wide_instr); +bool kvm_condition_valid32(const struct kvm_vcpu *vcpu); +void kvm_skip_instr32(struct kvm_vcpu *vcpu, bool is_wide_instr); void kvm_inject_undefined(struct kvm_vcpu *vcpu); +void kvm_inject_vabt(struct kvm_vcpu *vcpu); void kvm_inject_dabt(struct kvm_vcpu *vcpu, unsigned long addr); void kvm_inject_pabt(struct kvm_vcpu *vcpu, unsigned long addr); +static inline bool kvm_condition_valid(const struct kvm_vcpu *vcpu) +{ + return kvm_condition_valid32(vcpu); +} + +static inline void kvm_skip_instr(struct kvm_vcpu *vcpu, bool is_wide_instr) +{ + kvm_skip_instr32(vcpu, is_wide_instr); +} + static inline void vcpu_reset_hcr(struct kvm_vcpu *vcpu) { vcpu->arch.hcr = HCR_GUEST_MASK; } -static inline unsigned long vcpu_get_hcr(struct kvm_vcpu *vcpu) +static inline unsigned long vcpu_get_hcr(const struct kvm_vcpu *vcpu) { return vcpu->arch.hcr; } @@ -61,7 +72,7 @@ static inline void vcpu_set_hcr(struct kvm_vcpu *vcpu, unsigned long hcr) vcpu->arch.hcr = hcr; } -static inline bool vcpu_mode_is_32bit(struct kvm_vcpu *vcpu) +static inline bool vcpu_mode_is_32bit(const struct kvm_vcpu *vcpu) { return 1; } @@ -71,9 +82,9 @@ static inline unsigned long *vcpu_pc(struct kvm_vcpu *vcpu) return &vcpu->arch.ctxt.gp_regs.usr_regs.ARM_pc; } -static inline unsigned long *vcpu_cpsr(struct kvm_vcpu *vcpu) +static inline unsigned long *vcpu_cpsr(const struct kvm_vcpu *vcpu) { - return &vcpu->arch.ctxt.gp_regs.usr_regs.ARM_cpsr; + return (unsigned long *)&vcpu->arch.ctxt.gp_regs.usr_regs.ARM_cpsr; } static inline void vcpu_set_thumb(struct kvm_vcpu *vcpu) @@ -93,11 +104,21 @@ static inline bool vcpu_mode_priv(struct kvm_vcpu *vcpu) return cpsr_mode > USR_MODE;; } -static inline u32 kvm_vcpu_get_hsr(struct kvm_vcpu *vcpu) +static inline u32 kvm_vcpu_get_hsr(const struct kvm_vcpu *vcpu) { return vcpu->arch.fault.hsr; } +static inline int kvm_vcpu_get_condition(const struct kvm_vcpu *vcpu) +{ + u32 hsr = kvm_vcpu_get_hsr(vcpu); + + if (hsr & HSR_CV) + return (hsr & HSR_COND) >> HSR_COND_SHIFT; + + return -1; +} + static inline unsigned long kvm_vcpu_get_hfar(struct kvm_vcpu *vcpu) { return vcpu->arch.fault.hxfar; diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index de338d93d11b..2d19e02d03fd 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -39,7 +39,12 @@ #include <kvm/arm_vgic.h> + +#ifdef CONFIG_ARM_GIC_V3 +#define KVM_MAX_VCPUS VGIC_V3_MAX_CPUS +#else #define KVM_MAX_VCPUS VGIC_V2_MAX_CPUS +#endif #define KVM_REQ_VCPU_EXIT 8 @@ -183,15 +188,15 @@ struct kvm_vcpu_arch { }; struct kvm_vm_stat { - u32 remote_tlb_flush; + ulong remote_tlb_flush; }; struct kvm_vcpu_stat { - u32 halt_successful_poll; - u32 halt_attempted_poll; - u32 halt_poll_invalid; - u32 halt_wakeup; - u32 hvc_exit_stat; + u64 halt_successful_poll; + u64 halt_attempted_poll; + u64 halt_poll_invalid; + u64 halt_wakeup; + u64 hvc_exit_stat; u64 wfe_exit_stat; u64 wfi_exit_stat; u64 mmio_exit_user; diff --git a/arch/arm/include/asm/kvm_hyp.h b/arch/arm/include/asm/kvm_hyp.h index 6eaff28f2ff3..343135ede5fa 100644 --- a/arch/arm/include/asm/kvm_hyp.h +++ b/arch/arm/include/asm/kvm_hyp.h @@ -20,28 +20,15 @@ #include <linux/compiler.h> #include <linux/kvm_host.h> +#include <asm/cp15.h> #include <asm/kvm_mmu.h> #include <asm/vfp.h> #define __hyp_text __section(.hyp.text) notrace -#define __ACCESS_CP15(CRn, Op1, CRm, Op2) \ - "mrc", "mcr", __stringify(p15, Op1, %0, CRn, CRm, Op2), u32 -#define __ACCESS_CP15_64(Op1, CRm) \ - "mrrc", "mcrr", __stringify(p15, Op1, %Q0, %R0, CRm), u64 #define __ACCESS_VFP(CRn) \ "mrc", "mcr", __stringify(p10, 7, %0, CRn, cr0, 0), u32 -#define __write_sysreg(v, r, w, c, t) asm volatile(w " " c : : "r" ((t)(v))) -#define write_sysreg(v, ...) __write_sysreg(v, __VA_ARGS__) - -#define __read_sysreg(r, w, c, t) ({ \ - t __val; \ - asm volatile(r " " c : "=r" (__val)); \ - __val; \ -}) -#define read_sysreg(...) __read_sysreg(__VA_ARGS__) - #define write_special(v, r) \ asm volatile("msr " __stringify(r) ", %0" : : "r" (v)) #define read_special(r) ({ \ @@ -119,6 +106,9 @@ void __vgic_v2_restore_state(struct kvm_vcpu *vcpu); void __sysreg_save_state(struct kvm_cpu_context *ctxt); void __sysreg_restore_state(struct kvm_cpu_context *ctxt); +void __vgic_v3_save_state(struct kvm_vcpu *vcpu); +void __vgic_v3_restore_state(struct kvm_vcpu *vcpu); + void asmlinkage __vfp_save_state(struct vfp_hard_struct *vfp); void asmlinkage __vfp_restore_state(struct vfp_hard_struct *vfp); static inline bool __vfp_enabled(void) diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h index 3bb803d6814b..74a44727f8e1 100644 --- a/arch/arm/include/asm/kvm_mmu.h +++ b/arch/arm/include/asm/kvm_mmu.h @@ -63,37 +63,13 @@ void kvm_clear_hyp_idmap(void); static inline void kvm_set_pmd(pmd_t *pmd, pmd_t new_pmd) { *pmd = new_pmd; - flush_pmd_entry(pmd); + dsb(ishst); } static inline void kvm_set_pte(pte_t *pte, pte_t new_pte) { *pte = new_pte; - /* - * flush_pmd_entry just takes a void pointer and cleans the necessary - * cache entries, so we can reuse the function for ptes. - */ - flush_pmd_entry(pte); -} - -static inline void kvm_clean_pgd(pgd_t *pgd) -{ - clean_dcache_area(pgd, PTRS_PER_S2_PGD * sizeof(pgd_t)); -} - -static inline void kvm_clean_pmd(pmd_t *pmd) -{ - clean_dcache_area(pmd, PTRS_PER_PMD * sizeof(pmd_t)); -} - -static inline void kvm_clean_pmd_entry(pmd_t *pmd) -{ - clean_pmd_entry(pmd); -} - -static inline void kvm_clean_pte(pte_t *pte) -{ - clean_pte_table(pte); + dsb(ishst); } static inline pte_t kvm_s2pte_mkwrite(pte_t pte) diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 31c07a2cc100..76cbd9c674df 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -159,13 +159,8 @@ * PFNs are used to describe any physical page; this means * PFN 0 == physical address 0. */ -#if defined(__virt_to_phys) -#define PHYS_OFFSET PLAT_PHYS_OFFSET -#define PHYS_PFN_OFFSET ((unsigned long)(PHYS_OFFSET >> PAGE_SHIFT)) - -#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT) -#elif defined(CONFIG_ARM_PATCH_PHYS_VIRT) +#if defined(CONFIG_ARM_PATCH_PHYS_VIRT) /* * Constants used to force the right instruction encodings and shifts @@ -182,10 +177,6 @@ extern const void *__pv_table_begin, *__pv_table_end; #define PHYS_OFFSET ((phys_addr_t)__pv_phys_pfn_offset << PAGE_SHIFT) #define PHYS_PFN_OFFSET (__pv_phys_pfn_offset) -#define virt_to_pfn(kaddr) \ - ((((unsigned long)(kaddr) - PAGE_OFFSET) >> PAGE_SHIFT) + \ - PHYS_PFN_OFFSET) - #define __pv_stub(from,to,instr,type) \ __asm__("@ __pv_stub\n" \ "1: " instr " %0, %1, %2\n" \ @@ -257,12 +248,12 @@ static inline unsigned long __phys_to_virt(phys_addr_t x) return x - PHYS_OFFSET + PAGE_OFFSET; } +#endif + #define virt_to_pfn(kaddr) \ ((((unsigned long)(kaddr) - PAGE_OFFSET) >> PAGE_SHIFT) + \ PHYS_PFN_OFFSET) -#endif - /* * These are *only* valid on the kernel direct mapped RAM memory. * Note: Drivers should NOT use these. They are the wrong diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h index e358b7966c06..464748b9fd7d 100644 --- a/arch/arm/include/asm/module.h +++ b/arch/arm/include/asm/module.h @@ -23,10 +23,8 @@ struct mod_arch_specific { struct unwind_table *unwind[ARM_SEC_MAX]; #endif #ifdef CONFIG_ARM_MODULE_PLTS - struct elf32_shdr *core_plt; - struct elf32_shdr *init_plt; - int core_plt_count; - int init_plt_count; + struct elf32_shdr *plt; + int plt_count; #endif }; diff --git a/arch/arm/include/asm/pgtable-2level-hwdef.h b/arch/arm/include/asm/pgtable-2level-hwdef.h index d0131ee6f6af..3f82e9da7cec 100644 --- a/arch/arm/include/asm/pgtable-2level-hwdef.h +++ b/arch/arm/include/asm/pgtable-2level-hwdef.h @@ -47,6 +47,7 @@ #define PMD_SECT_WB (PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE) #define PMD_SECT_MINICACHE (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE) #define PMD_SECT_WBWA (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE) +#define PMD_SECT_CACHE_MASK (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE) #define PMD_SECT_NONSHARED_DEV (PMD_SECT_TEX(2)) /* diff --git a/arch/arm/include/asm/pgtable-3level-hwdef.h b/arch/arm/include/asm/pgtable-3level-hwdef.h index f8f1cff62065..4cd664abfcd3 100644 --- a/arch/arm/include/asm/pgtable-3level-hwdef.h +++ b/arch/arm/include/asm/pgtable-3level-hwdef.h @@ -62,6 +62,7 @@ #define PMD_SECT_WT (_AT(pmdval_t, 2) << 2) /* normal inner write-through */ #define PMD_SECT_WB (_AT(pmdval_t, 3) << 2) /* normal inner write-back */ #define PMD_SECT_WBWA (_AT(pmdval_t, 7) << 2) /* normal inner write-alloc */ +#define PMD_SECT_CACHE_MASK (_AT(pmdval_t, 7) << 2) /* * + Level 3 descriptor (PTE) diff --git a/arch/arm/include/asm/v7m.h b/arch/arm/include/asm/v7m.h index 615781c61627..1fd775c1bc5d 100644 --- a/arch/arm/include/asm/v7m.h +++ b/arch/arm/include/asm/v7m.h @@ -24,6 +24,9 @@ #define V7M_SCB_CCR 0x14 #define V7M_SCB_CCR_STKALIGN (1 << 9) +#define V7M_SCB_CCR_DC (1 << 16) +#define V7M_SCB_CCR_IC (1 << 17) +#define V7M_SCB_CCR_BP (1 << 18) #define V7M_SCB_SHPR2 0x1c #define V7M_SCB_SHPR3 0x20 @@ -47,6 +50,25 @@ #define EXC_RET_STACK_MASK 0x00000004 #define EXC_RET_THREADMODE_PROCESSSTACK 0xfffffffd +/* Cache related definitions */ + +#define V7M_SCB_CLIDR 0x78 /* Cache Level ID register */ +#define V7M_SCB_CTR 0x7c /* Cache Type register */ +#define V7M_SCB_CCSIDR 0x80 /* Cache size ID register */ +#define V7M_SCB_CSSELR 0x84 /* Cache size selection register */ + +/* Cache opeartions */ +#define V7M_SCB_ICIALLU 0x250 /* I-cache invalidate all to PoU */ +#define V7M_SCB_ICIMVAU 0x258 /* I-cache invalidate by MVA to PoU */ +#define V7M_SCB_DCIMVAC 0x25c /* D-cache invalidate by MVA to PoC */ +#define V7M_SCB_DCISW 0x260 /* D-cache invalidate by set-way */ +#define V7M_SCB_DCCMVAU 0x264 /* D-cache clean by MVA to PoU */ +#define V7M_SCB_DCCMVAC 0x268 /* D-cache clean by MVA to PoC */ +#define V7M_SCB_DCCSW 0x26c /* D-cache clean by set-way */ +#define V7M_SCB_DCCIMVAC 0x270 /* D-cache clean and invalidate by MVA to PoC */ +#define V7M_SCB_DCCISW 0x274 /* D-cache clean and invalidate by set-way */ +#define V7M_SCB_BPIALL 0x278 /* D-cache clean and invalidate by set-way */ + #ifndef __ASSEMBLY__ enum reboot_mode; diff --git a/arch/arm/include/uapi/asm/kvm.h b/arch/arm/include/uapi/asm/kvm.h index a2b3eb313a25..b38c10c73579 100644 --- a/arch/arm/include/uapi/asm/kvm.h +++ b/arch/arm/include/uapi/asm/kvm.h @@ -84,6 +84,13 @@ struct kvm_regs { #define KVM_VGIC_V2_DIST_SIZE 0x1000 #define KVM_VGIC_V2_CPU_SIZE 0x2000 +/* Supported VGICv3 address types */ +#define KVM_VGIC_V3_ADDR_TYPE_DIST 2 +#define KVM_VGIC_V3_ADDR_TYPE_REDIST 3 + +#define KVM_VGIC_V3_DIST_SIZE SZ_64K +#define KVM_VGIC_V3_REDIST_SIZE (2 * SZ_64K) + #define KVM_ARM_VCPU_POWER_OFF 0 /* CPU is started in OFF state */ #define KVM_ARM_VCPU_PSCI_0_2 1 /* CPU uses PSCI v0.2 */ diff --git a/arch/arm/kernel/cpuidle.c b/arch/arm/kernel/cpuidle.c index 7dccc964d75f..a3308ad1a024 100644 --- a/arch/arm/kernel/cpuidle.c +++ b/arch/arm/kernel/cpuidle.c @@ -19,7 +19,7 @@ extern struct of_cpuidle_method __cpuidle_method_of_table[]; static const struct of_cpuidle_method __cpuidle_method_of_table_sentinel __used __section(__cpuidle_method_of_table_end); -static struct cpuidle_ops cpuidle_ops[NR_CPUS]; +static struct cpuidle_ops cpuidle_ops[NR_CPUS] __ro_after_init; /** * arm_cpuidle_simple_enter() - a wrapper to cpu_do_idle() diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index 40ecd5f514a2..f676febbb270 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -88,6 +88,8 @@ void __init arm_dt_init_cpu_maps(void) return; for_each_child_of_node(cpus, cpu) { + const __be32 *cell; + int prop_bytes; u32 hwid; if (of_node_cmp(cpu->type, "cpu")) @@ -99,7 +101,8 @@ void __init arm_dt_init_cpu_maps(void) * properties is considered invalid to build the * cpu_logical_map. */ - if (of_property_read_u32(cpu, "reg", &hwid)) { + cell = of_get_property(cpu, "reg", &prop_bytes); + if (!cell || prop_bytes < sizeof(*cell)) { pr_debug(" * %s missing reg property\n", cpu->full_name); of_node_put(cpu); @@ -107,10 +110,15 @@ void __init arm_dt_init_cpu_maps(void) } /* - * 8 MSBs must be set to 0 in the DT since the reg property + * Bits n:24 must be set to 0 in the DT since the reg property * defines the MPIDR[23:0]. */ - if (hwid & ~MPIDR_HWID_BITMASK) { + do { + hwid = be32_to_cpu(*cell++); + prop_bytes -= sizeof(*cell); + } while (!hwid && prop_bytes > 0); + + if (prop_bytes || (hwid & ~MPIDR_HWID_BITMASK)) { of_node_put(cpu); return; } diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c index 709ee1d6d4df..3f1759411d51 100644 --- a/arch/arm/kernel/ftrace.c +++ b/arch/arm/kernel/ftrace.c @@ -218,7 +218,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr, } err = ftrace_push_return_trace(old, self_addr, &trace.depth, - frame_pointer); + frame_pointer, NULL); if (err == -EBUSY) { *parent = old; return; diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index fb1a69eb49c1..6b4eb27b8758 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -158,7 +158,21 @@ __after_proc_init: bic r0, r0, #CR_V #endif mcr p15, 0, r0, c1, c0, 0 @ write control reg -#endif /* CONFIG_CPU_CP15 */ +#elif defined (CONFIG_CPU_V7M) + /* For V7M systems we want to modify the CCR similarly to the SCTLR */ +#ifdef CONFIG_CPU_DCACHE_DISABLE + bic r0, r0, #V7M_SCB_CCR_DC +#endif +#ifdef CONFIG_CPU_BPREDICT_DISABLE + bic r0, r0, #V7M_SCB_CCR_BP +#endif +#ifdef CONFIG_CPU_ICACHE_DISABLE + bic r0, r0, #V7M_SCB_CCR_IC +#endif + movw r3, #:lower16:(BASEADDR_V7M_SCB + V7M_SCB_CCR) + movt r3, #:upper16:(BASEADDR_V7M_SCB + V7M_SCB_CCR) + str r0, [r3] +#endif /* CONFIG_CPU_CP15 elif CONFIG_CPU_V7M */ ret lr ENDPROC(__after_proc_init) .ltorg diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S index 0b1e4a93d67e..15d073ae5da2 100644 --- a/arch/arm/kernel/hyp-stub.S +++ b/arch/arm/kernel/hyp-stub.S @@ -142,6 +142,19 @@ ARM_BE8(orr r7, r7, #(1 << 25)) @ HSCTLR.EE and r7, #0x1f @ Preserve HPMN mcr p15, 4, r7, c1, c1, 1 @ HDCR + @ Make sure NS-SVC is initialised appropriately + mrc p15, 0, r7, c1, c0, 0 @ SCTLR + orr r7, #(1 << 5) @ CP15 barriers enabled + bic r7, #(3 << 7) @ Clear SED/ITD for v8 (RES0 for v7) + bic r7, #(3 << 19) @ WXN and UWXN disabled + mcr p15, 0, r7, c1, c0, 0 @ SCTLR + + mrc p15, 0, r7, c0, c0, 0 @ MIDR + mcr p15, 4, r7, c0, c0, 0 @ VPIDR + + mrc p15, 0, r7, c0, c0, 5 @ MPIDR + mcr p15, 4, r7, c0, c0, 5 @ VMPIDR + #if !defined(ZIMAGE) && defined(CONFIG_ARM_ARCH_TIMER) @ make CNTP_* and CNTPCT accessible from PL1 mrc p15, 0, r7, c0, c1, 1 @ ID_PFR1 diff --git a/arch/arm/kernel/module-plts.c b/arch/arm/kernel/module-plts.c index 0c7efc3446c0..3a5cba90c971 100644 --- a/arch/arm/kernel/module-plts.c +++ b/arch/arm/kernel/module-plts.c @@ -9,6 +9,7 @@ #include <linux/elf.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/sort.h> #include <asm/cache.h> #include <asm/opcodes.h> @@ -30,154 +31,198 @@ struct plt_entries { u32 lit[PLT_ENT_COUNT]; }; -static bool in_init(const struct module *mod, u32 addr) +u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val) { - return addr - (u32)mod->init_layout.base < mod->init_layout.size; + struct plt_entries *plt = (struct plt_entries *)mod->arch.plt->sh_addr; + int idx = 0; + + /* + * Look for an existing entry pointing to 'val'. Given that the + * relocations are sorted, this will be the last entry we allocated. + * (if one exists). + */ + if (mod->arch.plt_count > 0) { + plt += (mod->arch.plt_count - 1) / PLT_ENT_COUNT; + idx = (mod->arch.plt_count - 1) % PLT_ENT_COUNT; + + if (plt->lit[idx] == val) + return (u32)&plt->ldr[idx]; + + idx = (idx + 1) % PLT_ENT_COUNT; + if (!idx) + plt++; + } + + mod->arch.plt_count++; + BUG_ON(mod->arch.plt_count * PLT_ENT_SIZE > mod->arch.plt->sh_size); + + if (!idx) + /* Populate a new set of entries */ + *plt = (struct plt_entries){ + { [0 ... PLT_ENT_COUNT - 1] = PLT_ENT_LDR, }, + { val, } + }; + else + plt->lit[idx] = val; + + return (u32)&plt->ldr[idx]; } -u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val) +#define cmp_3way(a,b) ((a) < (b) ? -1 : (a) > (b)) + +static int cmp_rel(const void *a, const void *b) { - struct plt_entries *plt, *plt_end; - int c, *count; - - if (in_init(mod, loc)) { - plt = (void *)mod->arch.init_plt->sh_addr; - plt_end = (void *)plt + mod->arch.init_plt->sh_size; - count = &mod->arch.init_plt_count; - } else { - plt = (void *)mod->arch.core_plt->sh_addr; - plt_end = (void *)plt + mod->arch.core_plt->sh_size; - count = &mod->arch.core_plt_count; - } + const Elf32_Rel *x = a, *y = b; + int i; - /* Look for an existing entry pointing to 'val' */ - for (c = *count; plt < plt_end; c -= PLT_ENT_COUNT, plt++) { - int i; - - if (!c) { - /* Populate a new set of entries */ - *plt = (struct plt_entries){ - { [0 ... PLT_ENT_COUNT - 1] = PLT_ENT_LDR, }, - { val, } - }; - ++*count; - return (u32)plt->ldr; - } - for (i = 0; i < PLT_ENT_COUNT; i++) { - if (!plt->lit[i]) { - plt->lit[i] = val; - ++*count; - } - if (plt->lit[i] == val) - return (u32)&plt->ldr[i]; - } + /* sort by type and symbol index */ + i = cmp_3way(ELF32_R_TYPE(x->r_info), ELF32_R_TYPE(y->r_info)); + if (i == 0) + i = cmp_3way(ELF32_R_SYM(x->r_info), ELF32_R_SYM(y->r_info)); + return i; +} + +static bool is_zero_addend_relocation(Elf32_Addr base, const Elf32_Rel *rel) +{ + u32 *tval = (u32 *)(base + rel->r_offset); + + /* + * Do a bitwise compare on the raw addend rather than fully decoding + * the offset and doing an arithmetic comparison. + * Note that a zero-addend jump/call relocation is encoded taking the + * PC bias into account, i.e., -8 for ARM and -4 for Thumb2. + */ + switch (ELF32_R_TYPE(rel->r_info)) { + u16 upper, lower; + + case R_ARM_THM_CALL: + case R_ARM_THM_JUMP24: + upper = __mem_to_opcode_thumb16(((u16 *)tval)[0]); + lower = __mem_to_opcode_thumb16(((u16 *)tval)[1]); + + return (upper & 0x7ff) == 0x7ff && (lower & 0x2fff) == 0x2ffe; + + case R_ARM_CALL: + case R_ARM_PC24: + case R_ARM_JUMP24: + return (__mem_to_opcode_arm(*tval) & 0xffffff) == 0xfffffe; } BUG(); } -static int duplicate_rel(Elf32_Addr base, const Elf32_Rel *rel, int num, - u32 mask) +static bool duplicate_rel(Elf32_Addr base, const Elf32_Rel *rel, int num) { - u32 *loc1, *loc2; - int i; + const Elf32_Rel *prev; - for (i = 0; i < num; i++) { - if (rel[i].r_info != rel[num].r_info) - continue; + /* + * Entries are sorted by type and symbol index. That means that, + * if a duplicate entry exists, it must be in the preceding + * slot. + */ + if (!num) + return false; - /* - * Identical relocation types against identical symbols can - * still result in different PLT entries if the addend in the - * place is different. So resolve the target of the relocation - * to compare the values. - */ - loc1 = (u32 *)(base + rel[i].r_offset); - loc2 = (u32 *)(base + rel[num].r_offset); - if (((*loc1 ^ *loc2) & mask) == 0) - return 1; - } - return 0; + prev = rel + num - 1; + return cmp_rel(rel + num, prev) == 0 && + is_zero_addend_relocation(base, prev); } /* Count how many PLT entries we may need */ -static unsigned int count_plts(Elf32_Addr base, const Elf32_Rel *rel, int num) +static unsigned int count_plts(const Elf32_Sym *syms, Elf32_Addr base, + const Elf32_Rel *rel, int num) { unsigned int ret = 0; + const Elf32_Sym *s; int i; - /* - * Sure, this is order(n^2), but it's usually short, and not - * time critical - */ - for (i = 0; i < num; i++) + for (i = 0; i < num; i++) { switch (ELF32_R_TYPE(rel[i].r_info)) { case R_ARM_CALL: case R_ARM_PC24: case R_ARM_JUMP24: - if (!duplicate_rel(base, rel, i, - __opcode_to_mem_arm(0x00ffffff))) - ret++; - break; -#ifdef CONFIG_THUMB2_KERNEL case R_ARM_THM_CALL: case R_ARM_THM_JUMP24: - if (!duplicate_rel(base, rel, i, - __opcode_to_mem_thumb32(0x07ff2fff))) + /* + * We only have to consider branch targets that resolve + * to undefined symbols. This is not simply a heuristic, + * it is a fundamental limitation, since the PLT itself + * is part of the module, and needs to be within range + * as well, so modules can never grow beyond that limit. + */ + s = syms + ELF32_R_SYM(rel[i].r_info); + if (s->st_shndx != SHN_UNDEF) + break; + + /* + * Jump relocations with non-zero addends against + * undefined symbols are supported by the ELF spec, but + * do not occur in practice (e.g., 'jump n bytes past + * the entry point of undefined function symbol f'). + * So we need to support them, but there is no need to + * take them into consideration when trying to optimize + * this code. So let's only check for duplicates when + * the addend is zero. + */ + if (!is_zero_addend_relocation(base, rel + i) || + !duplicate_rel(base, rel, i)) ret++; -#endif } + } return ret; } int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs, char *secstrings, struct module *mod) { - unsigned long core_plts = 0, init_plts = 0; + unsigned long plts = 0; Elf32_Shdr *s, *sechdrs_end = sechdrs + ehdr->e_shnum; + Elf32_Sym *syms = NULL; /* * To store the PLTs, we expand the .text section for core module code - * and the .init.text section for initialization code. + * and for initialization code. */ - for (s = sechdrs; s < sechdrs_end; ++s) - if (strcmp(".core.plt", secstrings + s->sh_name) == 0) - mod->arch.core_plt = s; - else if (strcmp(".init.plt", secstrings + s->sh_name) == 0) - mod->arch.init_plt = s; - - if (!mod->arch.core_plt || !mod->arch.init_plt) { - pr_err("%s: sections missing\n", mod->name); + for (s = sechdrs; s < sechdrs_end; ++s) { + if (strcmp(".plt", secstrings + s->sh_name) == 0) + mod->arch.plt = s; + else if (s->sh_type == SHT_SYMTAB) + syms = (Elf32_Sym *)s->sh_addr; + } + + if (!mod->arch.plt) { + pr_err("%s: module PLT section missing\n", mod->name); + return -ENOEXEC; + } + if (!syms) { + pr_err("%s: module symtab section missing\n", mod->name); return -ENOEXEC; } for (s = sechdrs + 1; s < sechdrs_end; ++s) { - const Elf32_Rel *rels = (void *)ehdr + s->sh_offset; + Elf32_Rel *rels = (void *)ehdr + s->sh_offset; int numrels = s->sh_size / sizeof(Elf32_Rel); Elf32_Shdr *dstsec = sechdrs + s->sh_info; if (s->sh_type != SHT_REL) continue; - if (strstr(secstrings + s->sh_name, ".init")) - init_plts += count_plts(dstsec->sh_addr, rels, numrels); - else - core_plts += count_plts(dstsec->sh_addr, rels, numrels); + /* ignore relocations that operate on non-exec sections */ + if (!(dstsec->sh_flags & SHF_EXECINSTR)) + continue; + + /* sort by type and symbol index */ + sort(rels, numrels, sizeof(Elf32_Rel), cmp_rel, NULL); + + plts += count_plts(syms, dstsec->sh_addr, rels, numrels); } - mod->arch.core_plt->sh_type = SHT_NOBITS; - mod->arch.core_plt->sh_flags = SHF_EXECINSTR | SHF_ALLOC; - mod->arch.core_plt->sh_addralign = L1_CACHE_BYTES; - mod->arch.core_plt->sh_size = round_up(core_plts * PLT_ENT_SIZE, - sizeof(struct plt_entries)); - mod->arch.core_plt_count = 0; - - mod->arch.init_plt->sh_type = SHT_NOBITS; - mod->arch.init_plt->sh_flags = SHF_EXECINSTR | SHF_ALLOC; - mod->arch.init_plt->sh_addralign = L1_CACHE_BYTES; - mod->arch.init_plt->sh_size = round_up(init_plts * PLT_ENT_SIZE, - sizeof(struct plt_entries)); - mod->arch.init_plt_count = 0; - pr_debug("%s: core.plt=%x, init.plt=%x\n", __func__, - mod->arch.core_plt->sh_size, mod->arch.init_plt->sh_size); + mod->arch.plt->sh_type = SHT_NOBITS; + mod->arch.plt->sh_flags = SHF_EXECINSTR | SHF_ALLOC; + mod->arch.plt->sh_addralign = L1_CACHE_BYTES; + mod->arch.plt->sh_size = round_up(plts * PLT_ENT_SIZE, + sizeof(struct plt_entries)); + mod->arch.plt_count = 0; + + pr_debug("%s: plt=%x\n", __func__, mod->arch.plt->sh_size); return 0; } diff --git a/arch/arm/kernel/module.lds b/arch/arm/kernel/module.lds index 3682fa107918..05881e2b414c 100644 --- a/arch/arm/kernel/module.lds +++ b/arch/arm/kernel/module.lds @@ -1,4 +1,3 @@ SECTIONS { - .core.plt : { BYTE(0) } - .init.plt : { BYTE(0) } + .plt : { BYTE(0) } } diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index 15063851cd10..b9423491b9d7 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -596,12 +596,6 @@ static struct attribute_group armv7_pmuv1_events_attr_group = { .attrs = armv7_pmuv1_event_attrs, }; -static const struct attribute_group *armv7_pmuv1_attr_groups[] = { - &armv7_pmuv1_events_attr_group, - &armv7_pmu_format_attr_group, - NULL, -}; - ARMV7_EVENT_ATTR(mem_access, ARMV7_PERFCTR_MEM_ACCESS); ARMV7_EVENT_ATTR(l1i_cache, ARMV7_PERFCTR_L1_ICACHE_ACCESS); ARMV7_EVENT_ATTR(l1d_cache_wb, ARMV7_PERFCTR_L1_DCACHE_WB); @@ -653,12 +647,6 @@ static struct attribute_group armv7_pmuv2_events_attr_group = { .attrs = armv7_pmuv2_event_attrs, }; -static const struct attribute_group *armv7_pmuv2_attr_groups[] = { - &armv7_pmuv2_events_attr_group, - &armv7_pmu_format_attr_group, - NULL, -}; - /* * Perf Events' indices */ @@ -1208,7 +1196,10 @@ static int armv7_a8_pmu_init(struct arm_pmu *cpu_pmu) armv7pmu_init(cpu_pmu); cpu_pmu->name = "armv7_cortex_a8"; cpu_pmu->map_event = armv7_a8_map_event; - cpu_pmu->pmu.attr_groups = armv7_pmuv1_attr_groups; + cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] = + &armv7_pmuv1_events_attr_group; + cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] = + &armv7_pmu_format_attr_group; return armv7_probe_num_events(cpu_pmu); } @@ -1217,7 +1208,10 @@ static int armv7_a9_pmu_init(struct arm_pmu *cpu_pmu) armv7pmu_init(cpu_pmu); cpu_pmu->name = "armv7_cortex_a9"; cpu_pmu->map_event = armv7_a9_map_event; - cpu_pmu->pmu.attr_groups = armv7_pmuv1_attr_groups; + cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] = + &armv7_pmuv1_events_attr_group; + cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] = + &armv7_pmu_format_attr_group; return armv7_probe_num_events(cpu_pmu); } @@ -1226,7 +1220,10 @@ static int armv7_a5_pmu_init(struct arm_pmu *cpu_pmu) armv7pmu_init(cpu_pmu); cpu_pmu->name = "armv7_cortex_a5"; cpu_pmu->map_event = armv7_a5_map_event; - cpu_pmu->pmu.attr_groups = armv7_pmuv1_attr_groups; + cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] = + &armv7_pmuv1_events_attr_group; + cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] = + &armv7_pmu_format_attr_group; return armv7_probe_num_events(cpu_pmu); } @@ -1236,7 +1233,10 @@ static int armv7_a15_pmu_init(struct arm_pmu *cpu_pmu) cpu_pmu->name = "armv7_cortex_a15"; cpu_pmu->map_event = armv7_a15_map_event; cpu_pmu->set_event_filter = armv7pmu_set_event_filter; - cpu_pmu->pmu.attr_groups = armv7_pmuv2_attr_groups; + cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] = + &armv7_pmuv2_events_attr_group; + cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] = + &armv7_pmu_format_attr_group; return armv7_probe_num_events(cpu_pmu); } @@ -1246,7 +1246,10 @@ static int armv7_a7_pmu_init(struct arm_pmu *cpu_pmu) cpu_pmu->name = "armv7_cortex_a7"; cpu_pmu->map_event = armv7_a7_map_event; cpu_pmu->set_event_filter = armv7pmu_set_event_filter; - cpu_pmu->pmu.attr_groups = armv7_pmuv2_attr_groups; + cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] = + &armv7_pmuv2_events_attr_group; + cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] = + &armv7_pmu_format_attr_group; return armv7_probe_num_events(cpu_pmu); } @@ -1256,7 +1259,10 @@ static int armv7_a12_pmu_init(struct arm_pmu *cpu_pmu) cpu_pmu->name = "armv7_cortex_a12"; cpu_pmu->map_event = armv7_a12_map_event; cpu_pmu->set_event_filter = armv7pmu_set_event_filter; - cpu_pmu->pmu.attr_groups = armv7_pmuv2_attr_groups; + cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] = + &armv7_pmuv2_events_attr_group; + cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] = + &armv7_pmu_format_attr_group; return armv7_probe_num_events(cpu_pmu); } @@ -1264,7 +1270,10 @@ static int armv7_a17_pmu_init(struct arm_pmu *cpu_pmu) { int ret = armv7_a12_pmu_init(cpu_pmu); cpu_pmu->name = "armv7_cortex_a17"; - cpu_pmu->pmu.attr_groups = armv7_pmuv2_attr_groups; + cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] = + &armv7_pmuv2_events_attr_group; + cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] = + &armv7_pmu_format_attr_group; return ret; } diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index df7f2a75e769..34e3f3c45634 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -114,19 +114,19 @@ EXPORT_SYMBOL(elf_hwcap2); #ifdef MULTI_CPU -struct processor processor __read_mostly; +struct processor processor __ro_after_init; #endif #ifdef MULTI_TLB -struct cpu_tlb_fns cpu_tlb __read_mostly; +struct cpu_tlb_fns cpu_tlb __ro_after_init; #endif #ifdef MULTI_USER -struct cpu_user_fns cpu_user __read_mostly; +struct cpu_user_fns cpu_user __ro_after_init; #endif #ifdef MULTI_CACHE -struct cpu_cache_fns cpu_cache __read_mostly; +struct cpu_cache_fns cpu_cache __ro_after_init; #endif #ifdef CONFIG_OUTER_CACHE -struct outer_cache_fns outer_cache __read_mostly; +struct outer_cache_fns outer_cache __ro_after_init; EXPORT_SYMBOL(outer_cache); #endif @@ -290,12 +290,9 @@ static int cpu_has_aliasing_icache(unsigned int arch) /* arch specifies the register format */ switch (arch) { case CPU_ARCH_ARMv7: - asm("mcr p15, 2, %0, c0, c0, 0 @ set CSSELR" - : /* No output operands */ - : "r" (1)); + set_csselr(CSSELR_ICACHE | CSSELR_L1); isb(); - asm("mrc p15, 1, %0, c0, c0, 0 @ read CCSIDR" - : "=r" (id_reg)); + id_reg = read_ccsidr(); line_size = 4 << ((id_reg & 0x7) + 2); num_sets = ((id_reg >> 13) & 0x7fff) + 1; aliasing_icache = (line_size * num_sets) > PAGE_SIZE; @@ -315,11 +312,12 @@ static void __init cacheid_init(void) { unsigned int arch = cpu_architecture(); - if (arch == CPU_ARCH_ARMv7M) { - cacheid = 0; - } else if (arch >= CPU_ARCH_ARMv6) { + if (arch >= CPU_ARCH_ARMv6) { unsigned int cachetype = read_cpuid_cachetype(); - if ((cachetype & (7 << 29)) == 4 << 29) { + + if ((arch == CPU_ARCH_ARMv7M) && !cachetype) { + cacheid = 0; + } else if ((cachetype & (7 << 29)) == 4 << 29) { /* ARMv7 register format */ arch = CPU_ARCH_ARMv7; cacheid = CACHEID_VIPT_NONALIASING; diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 861521606c6d..937c8920d741 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -82,7 +82,7 @@ enum ipi_msg_type { static DECLARE_COMPLETION(cpu_running); -static struct smp_operations smp_ops; +static struct smp_operations smp_ops __ro_after_init; void __init smp_set_ops(const struct smp_operations *ops) { diff --git a/arch/arm/kernel/vdso.c b/arch/arm/kernel/vdso.c index 994e971a8538..53cf86cf2d1a 100644 --- a/arch/arm/kernel/vdso.c +++ b/arch/arm/kernel/vdso.c @@ -17,6 +17,7 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ +#include <linux/cache.h> #include <linux/elf.h> #include <linux/err.h> #include <linux/kernel.h> @@ -39,7 +40,7 @@ static struct page **vdso_text_pagelist; /* Total number of pages needed for the data and text portions of the VDSO. */ -unsigned int vdso_total_pages __read_mostly; +unsigned int vdso_total_pages __ro_after_init; /* * The VDSO data page. @@ -47,13 +48,13 @@ unsigned int vdso_total_pages __read_mostly; static union vdso_data_store vdso_data_store __page_aligned_data; static struct vdso_data *vdso_data = &vdso_data_store.data; -static struct page *vdso_data_page; -static struct vm_special_mapping vdso_data_mapping = { +static struct page *vdso_data_page __ro_after_init; +static const struct vm_special_mapping vdso_data_mapping = { .name = "[vvar]", .pages = &vdso_data_page, }; -static struct vm_special_mapping vdso_text_mapping = { +static struct vm_special_mapping vdso_text_mapping __ro_after_init = { .name = "[vdso]", }; @@ -67,7 +68,7 @@ struct elfinfo { /* Cached result of boot-time check for whether the arch timer exists, * and if so, whether the virtual counter is useable. */ -static bool cntvct_ok __read_mostly; +static bool cntvct_ok __ro_after_init; static bool __init cntvct_functional(void) { @@ -270,7 +271,7 @@ static bool tk_is_cntvct(const struct timekeeper *tk) if (!IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) return false; - if (strcmp(tk->tkr_mono.clock->name, "arch_sys_counter") != 0) + if (!tk->tkr_mono.clock->archdata.vdso_direct) return false; return true; diff --git a/arch/arm/kvm/Makefile b/arch/arm/kvm/Makefile index 10d77a66cad5..f19842ea5418 100644 --- a/arch/arm/kvm/Makefile +++ b/arch/arm/kvm/Makefile @@ -21,13 +21,16 @@ obj-$(CONFIG_KVM_ARM_HOST) += hyp/ obj-y += kvm-arm.o init.o interrupts.o obj-y += arm.o handle_exit.o guest.o mmu.o emulate.o reset.o obj-y += coproc.o coproc_a15.o coproc_a7.o mmio.o psci.o perf.o +obj-y += $(KVM)/arm/aarch32.o obj-y += $(KVM)/arm/vgic/vgic.o obj-y += $(KVM)/arm/vgic/vgic-init.o obj-y += $(KVM)/arm/vgic/vgic-irqfd.o obj-y += $(KVM)/arm/vgic/vgic-v2.o +obj-y += $(KVM)/arm/vgic/vgic-v3.o obj-y += $(KVM)/arm/vgic/vgic-mmio.o obj-y += $(KVM)/arm/vgic/vgic-mmio-v2.o +obj-y += $(KVM)/arm/vgic/vgic-mmio-v3.o obj-y += $(KVM)/arm/vgic/vgic-kvm-device.o obj-y += $(KVM)/irqchip.o obj-y += $(KVM)/arm/arch_timer.o diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index 75f130ef6504..03e9273f1876 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -144,6 +144,16 @@ out_fail_alloc: return ret; } +bool kvm_arch_has_vcpu_debugfs(void) +{ + return false; +} + +int kvm_arch_create_vcpu_debugfs(struct kvm_vcpu *vcpu) +{ + return 0; +} + int kvm_arch_vcpu_fault(struct kvm_vcpu *vcpu, struct vm_fault *vmf) { return VM_FAULT_SIGBUS; @@ -158,8 +168,6 @@ void kvm_arch_destroy_vm(struct kvm *kvm) { int i; - kvm_free_stage2_pgd(kvm); - for (i = 0; i < KVM_MAX_VCPUS; ++i) { if (kvm->vcpus[i]) { kvm_arch_vcpu_free(kvm->vcpus[i]); @@ -1178,6 +1186,10 @@ static int init_common_resources(void) return -ENOMEM; } + /* set size of VMID supported by CPU */ + kvm_vmid_bits = kvm_get_vmid_bits(); + kvm_info("%d-bit VMID\n", kvm_vmid_bits); + return 0; } @@ -1243,10 +1255,6 @@ static void teardown_hyp_mode(void) static int init_vhe_mode(void) { - /* set size of VMID supported by CPU */ - kvm_vmid_bits = kvm_get_vmid_bits(); - kvm_info("%d-bit VMID\n", kvm_vmid_bits); - kvm_info("VHE mode initialized successfully\n"); return 0; } @@ -1330,10 +1338,6 @@ static int init_hyp_mode(void) } } - /* set size of VMID supported by CPU */ - kvm_vmid_bits = kvm_get_vmid_bits(); - kvm_info("%d-bit VMID\n", kvm_vmid_bits); - kvm_info("Hyp mode initialized successfully\n"); return 0; diff --git a/arch/arm/kvm/coproc.c b/arch/arm/kvm/coproc.c index 1bb2b79c01ff..3e5e4194ef86 100644 --- a/arch/arm/kvm/coproc.c +++ b/arch/arm/kvm/coproc.c @@ -228,6 +228,35 @@ bool access_vm_reg(struct kvm_vcpu *vcpu, return true; } +static bool access_gic_sgi(struct kvm_vcpu *vcpu, + const struct coproc_params *p, + const struct coproc_reg *r) +{ + u64 reg; + + if (!p->is_write) + return read_from_write_only(vcpu, p); + + reg = (u64)*vcpu_reg(vcpu, p->Rt2) << 32; + reg |= *vcpu_reg(vcpu, p->Rt1) ; + + vgic_v3_dispatch_sgi(vcpu, reg); + + return true; +} + +static bool access_gic_sre(struct kvm_vcpu *vcpu, + const struct coproc_params *p, + const struct coproc_reg *r) +{ + if (p->is_write) + return ignore_write(vcpu, p); + + *vcpu_reg(vcpu, p->Rt1) = vcpu->arch.vgic_cpu.vgic_v3.vgic_sre; + + return true; +} + /* * We could trap ID_DFR0 and tell the guest we don't support performance * monitoring. Unfortunately the patch to make the kernel check ID_DFR0 was @@ -361,10 +390,16 @@ static const struct coproc_reg cp15_regs[] = { { CRn(10), CRm( 3), Op1( 0), Op2( 1), is32, access_vm_reg, reset_unknown, c10_AMAIR1}, + /* ICC_SGI1R */ + { CRm64(12), Op1( 0), is64, access_gic_sgi}, + /* VBAR: swapped by interrupt.S. */ { CRn(12), CRm( 0), Op1( 0), Op2( 0), is32, NULL, reset_val, c12_VBAR, 0x00000000 }, + /* ICC_SRE */ + { CRn(12), CRm(12), Op1( 0), Op2(5), is32, access_gic_sre }, + /* CONTEXTIDR/TPIDRURW/TPIDRURO/TPIDRPRW: swapped by interrupt.S. */ { CRn(13), CRm( 0), Op1( 0), Op2( 1), is32, access_vm_reg, reset_val, c13_CID, 0x00000000 }, diff --git a/arch/arm/kvm/emulate.c b/arch/arm/kvm/emulate.c index af93e3ffc9f3..0064b86a2c87 100644 --- a/arch/arm/kvm/emulate.c +++ b/arch/arm/kvm/emulate.c @@ -161,105 +161,6 @@ unsigned long *vcpu_spsr(struct kvm_vcpu *vcpu) } } -/* - * A conditional instruction is allowed to trap, even though it - * wouldn't be executed. So let's re-implement the hardware, in - * software! - */ -bool kvm_condition_valid(struct kvm_vcpu *vcpu) -{ - unsigned long cpsr, cond, insn; - - /* - * Exception Code 0 can only happen if we set HCR.TGE to 1, to - * catch undefined instructions, and then we won't get past - * the arm_exit_handlers test anyway. - */ - BUG_ON(!kvm_vcpu_trap_get_class(vcpu)); - - /* Top two bits non-zero? Unconditional. */ - if (kvm_vcpu_get_hsr(vcpu) >> 30) - return true; - - cpsr = *vcpu_cpsr(vcpu); - - /* Is condition field valid? */ - if ((kvm_vcpu_get_hsr(vcpu) & HSR_CV) >> HSR_CV_SHIFT) - cond = (kvm_vcpu_get_hsr(vcpu) & HSR_COND) >> HSR_COND_SHIFT; - else { - /* This can happen in Thumb mode: examine IT state. */ - unsigned long it; - - it = ((cpsr >> 8) & 0xFC) | ((cpsr >> 25) & 0x3); - - /* it == 0 => unconditional. */ - if (it == 0) - return true; - - /* The cond for this insn works out as the top 4 bits. */ - cond = (it >> 4); - } - - /* Shift makes it look like an ARM-mode instruction */ - insn = cond << 28; - return arm_check_condition(insn, cpsr) != ARM_OPCODE_CONDTEST_FAIL; -} - -/** - * adjust_itstate - adjust ITSTATE when emulating instructions in IT-block - * @vcpu: The VCPU pointer - * - * When exceptions occur while instructions are executed in Thumb IF-THEN - * blocks, the ITSTATE field of the CPSR is not advanced (updated), so we have - * to do this little bit of work manually. The fields map like this: - * - * IT[7:0] -> CPSR[26:25],CPSR[15:10] - */ -static void kvm_adjust_itstate(struct kvm_vcpu *vcpu) -{ - unsigned long itbits, cond; - unsigned long cpsr = *vcpu_cpsr(vcpu); - bool is_arm = !(cpsr & PSR_T_BIT); - - BUG_ON(is_arm && (cpsr & PSR_IT_MASK)); - - if (!(cpsr & PSR_IT_MASK)) - return; - - cond = (cpsr & 0xe000) >> 13; - itbits = (cpsr & 0x1c00) >> (10 - 2); - itbits |= (cpsr & (0x3 << 25)) >> 25; - - /* Perform ITAdvance (see page A-52 in ARM DDI 0406C) */ - if ((itbits & 0x7) == 0) - itbits = cond = 0; - else - itbits = (itbits << 1) & 0x1f; - - cpsr &= ~PSR_IT_MASK; - cpsr |= cond << 13; - cpsr |= (itbits & 0x1c) << (10 - 2); - cpsr |= (itbits & 0x3) << 25; - *vcpu_cpsr(vcpu) = cpsr; -} - -/** - * kvm_skip_instr - skip a trapped instruction and proceed to the next - * @vcpu: The vcpu pointer - */ -void kvm_skip_instr(struct kvm_vcpu *vcpu, bool is_wide_instr) -{ - bool is_thumb; - - is_thumb = !!(*vcpu_cpsr(vcpu) & PSR_T_BIT); - if (is_thumb && !is_wide_instr) - *vcpu_pc(vcpu) += 2; - else - *vcpu_pc(vcpu) += 4; - kvm_adjust_itstate(vcpu); -} - - /****************************************************************************** * Inject exceptions into the guest */ @@ -402,3 +303,15 @@ void kvm_inject_pabt(struct kvm_vcpu *vcpu, unsigned long addr) { inject_abt(vcpu, true, addr); } + +/** + * kvm_inject_vabt - inject an async abort / SError into the guest + * @vcpu: The VCPU to receive the exception + * + * It is assumed that this code is called from the VCPU thread and that the + * VCPU therefore is not currently executing guest code. + */ +void kvm_inject_vabt(struct kvm_vcpu *vcpu) +{ + vcpu_set_hcr(vcpu, vcpu_get_hcr(vcpu) | HCR_VA); +} diff --git a/arch/arm/kvm/handle_exit.c b/arch/arm/kvm/handle_exit.c index 3f1ef0dbc899..4e40d1955e35 100644 --- a/arch/arm/kvm/handle_exit.c +++ b/arch/arm/kvm/handle_exit.c @@ -28,14 +28,6 @@ typedef int (*exit_handle_fn)(struct kvm_vcpu *, struct kvm_run *); -static int handle_svc_hyp(struct kvm_vcpu *vcpu, struct kvm_run *run) -{ - /* SVC called from Hyp mode should never get here */ - kvm_debug("SVC called from Hyp mode shouldn't go here\n"); - BUG(); - return -EINVAL; /* Squash warning */ -} - static int handle_hvc(struct kvm_vcpu *vcpu, struct kvm_run *run) { int ret; @@ -59,22 +51,6 @@ static int handle_smc(struct kvm_vcpu *vcpu, struct kvm_run *run) return 1; } -static int handle_pabt_hyp(struct kvm_vcpu *vcpu, struct kvm_run *run) -{ - /* The hypervisor should never cause aborts */ - kvm_err("Prefetch Abort taken from Hyp mode at %#08lx (HSR: %#08x)\n", - kvm_vcpu_get_hfar(vcpu), kvm_vcpu_get_hsr(vcpu)); - return -EFAULT; -} - -static int handle_dabt_hyp(struct kvm_vcpu *vcpu, struct kvm_run *run) -{ - /* This is either an error in the ws. code or an external abort */ - kvm_err("Data Abort taken from Hyp mode at %#08lx (HSR: %#08x)\n", - kvm_vcpu_get_hfar(vcpu), kvm_vcpu_get_hsr(vcpu)); - return -EFAULT; -} - /** * kvm_handle_wfx - handle a WFI or WFE instructions trapped in guests * @vcpu: the vcpu pointer @@ -112,13 +88,10 @@ static exit_handle_fn arm_exit_handlers[] = { [HSR_EC_CP14_64] = kvm_handle_cp14_access, [HSR_EC_CP_0_13] = kvm_handle_cp_0_13_access, [HSR_EC_CP10_ID] = kvm_handle_cp10_id, - [HSR_EC_SVC_HYP] = handle_svc_hyp, [HSR_EC_HVC] = handle_hvc, [HSR_EC_SMC] = handle_smc, [HSR_EC_IABT] = kvm_handle_guest_abort, - [HSR_EC_IABT_HYP] = handle_pabt_hyp, [HSR_EC_DABT] = kvm_handle_guest_abort, - [HSR_EC_DABT_HYP] = handle_dabt_hyp, }; static exit_handle_fn kvm_get_exit_handler(struct kvm_vcpu *vcpu) @@ -144,6 +117,25 @@ int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run, { exit_handle_fn exit_handler; + if (ARM_ABORT_PENDING(exception_index)) { + u8 hsr_ec = kvm_vcpu_trap_get_class(vcpu); + + /* + * HVC/SMC already have an adjusted PC, which we need + * to correct in order to return to after having + * injected the abort. + */ + if (hsr_ec == HSR_EC_HVC || hsr_ec == HSR_EC_SMC) { + u32 adj = kvm_vcpu_trap_il_is32bit(vcpu) ? 4 : 2; + *vcpu_pc(vcpu) -= adj; + } + + kvm_inject_vabt(vcpu); + return 1; + } + + exception_index = ARM_EXCEPTION_CODE(exception_index); + switch (exception_index) { case ARM_EXCEPTION_IRQ: return 1; @@ -160,6 +152,9 @@ int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run, exit_handler = kvm_get_exit_handler(vcpu); return exit_handler(vcpu, run); + case ARM_EXCEPTION_DATA_ABORT: + kvm_inject_vabt(vcpu); + return 1; default: kvm_pr_unimpl("Unsupported exception type: %d", exception_index); diff --git a/arch/arm/kvm/hyp/Makefile b/arch/arm/kvm/hyp/Makefile index 8dfa5f7f9290..3023bb530edf 100644 --- a/arch/arm/kvm/hyp/Makefile +++ b/arch/arm/kvm/hyp/Makefile @@ -5,6 +5,7 @@ KVM=../../../../virt/kvm obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/vgic-v2-sr.o +obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/vgic-v3-sr.o obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/timer-sr.o obj-$(CONFIG_KVM_ARM_HOST) += tlb.o diff --git a/arch/arm/kvm/hyp/entry.S b/arch/arm/kvm/hyp/entry.S index 21c238871c9e..60783f3b57cc 100644 --- a/arch/arm/kvm/hyp/entry.S +++ b/arch/arm/kvm/hyp/entry.S @@ -18,6 +18,7 @@ #include <linux/linkage.h> #include <asm/asm-offsets.h> #include <asm/kvm_arm.h> +#include <asm/kvm_asm.h> .arch_extension virt @@ -63,6 +64,36 @@ ENTRY(__guest_exit) ldr lr, [r0, #4] mov r0, r1 + mrs r1, SPSR + mrs r2, ELR_hyp + mrc p15, 4, r3, c5, c2, 0 @ HSR + + /* + * Force loads and stores to complete before unmasking aborts + * and forcing the delivery of the exception. This gives us a + * single instruction window, which the handler will try to + * match. + */ + dsb sy + cpsie a + + .global abort_guest_exit_start +abort_guest_exit_start: + + isb + + .global abort_guest_exit_end +abort_guest_exit_end: + + /* + * If we took an abort, r0[31] will be set, and cmp will set + * the N bit in PSTATE. + */ + cmp r0, #0 + msrmi SPSR_cxsf, r1 + msrmi ELR_hyp, r2 + mcrmi p15, 4, r3, c5, c2, 0 @ HSR + bx lr ENDPROC(__guest_exit) diff --git a/arch/arm/kvm/hyp/hyp-entry.S b/arch/arm/kvm/hyp/hyp-entry.S index 78091383a5d9..96beb53934c9 100644 --- a/arch/arm/kvm/hyp/hyp-entry.S +++ b/arch/arm/kvm/hyp/hyp-entry.S @@ -81,7 +81,6 @@ __kvm_hyp_vector: invalid_vector hyp_undef ARM_EXCEPTION_UNDEFINED invalid_vector hyp_svc ARM_EXCEPTION_SOFTWARE invalid_vector hyp_pabt ARM_EXCEPTION_PREF_ABORT - invalid_vector hyp_dabt ARM_EXCEPTION_DATA_ABORT invalid_vector hyp_fiq ARM_EXCEPTION_FIQ ENTRY(__hyp_do_panic) @@ -164,6 +163,21 @@ hyp_irq: load_vcpu r0 @ Load VCPU pointer to r0 b __guest_exit +hyp_dabt: + push {r0, r1} + mrs r0, ELR_hyp + ldr r1, =abort_guest_exit_start +THUMB( add r1, r1, #1) + cmp r0, r1 + ldrne r1, =abort_guest_exit_end +THUMB( addne r1, r1, #1) + cmpne r0, r1 + pop {r0, r1} + bne __hyp_panic + + orr r0, r0, #(1 << ARM_EXIT_WITH_ABORT_BIT) + eret + .ltorg .popsection diff --git a/arch/arm/kvm/hyp/switch.c b/arch/arm/kvm/hyp/switch.c index b13caa90cd44..92678b7bd046 100644 --- a/arch/arm/kvm/hyp/switch.c +++ b/arch/arm/kvm/hyp/switch.c @@ -14,6 +14,7 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ +#include <linux/jump_label.h> #include <asm/kvm_asm.h> #include <asm/kvm_hyp.h> @@ -54,6 +55,15 @@ static void __hyp_text __deactivate_traps(struct kvm_vcpu *vcpu) { u32 val; + /* + * If we pended a virtual abort, preserve it until it gets + * cleared. See B1.9.9 (Virtual Abort exception) for details, + * but the crucial bit is the zeroing of HCR.VA in the + * pseudocode. + */ + if (vcpu->arch.hcr & HCR_VA) + vcpu->arch.hcr = read_sysreg(HCR); + write_sysreg(0, HCR); write_sysreg(0, HSTR); val = read_sysreg(HDCR); @@ -74,14 +84,21 @@ static void __hyp_text __deactivate_vm(struct kvm_vcpu *vcpu) write_sysreg(read_sysreg(MIDR), VPIDR); } + static void __hyp_text __vgic_save_state(struct kvm_vcpu *vcpu) { - __vgic_v2_save_state(vcpu); + if (static_branch_unlikely(&kvm_vgic_global_state.gicv3_cpuif)) + __vgic_v3_save_state(vcpu); + else + __vgic_v2_save_state(vcpu); } static void __hyp_text __vgic_restore_state(struct kvm_vcpu *vcpu) { - __vgic_v2_restore_state(vcpu); + if (static_branch_unlikely(&kvm_vgic_global_state.gicv3_cpuif)) + __vgic_v3_restore_state(vcpu); + else + __vgic_v2_restore_state(vcpu); } static bool __hyp_text __populate_fault_info(struct kvm_vcpu *vcpu) @@ -134,7 +151,7 @@ static bool __hyp_text __populate_fault_info(struct kvm_vcpu *vcpu) return true; } -static int __hyp_text __guest_run(struct kvm_vcpu *vcpu) +int __hyp_text __kvm_vcpu_run(struct kvm_vcpu *vcpu) { struct kvm_cpu_context *host_ctxt; struct kvm_cpu_context *guest_ctxt; @@ -191,8 +208,6 @@ again: return exit_code; } -__alias(__guest_run) int __kvm_vcpu_run(struct kvm_vcpu *vcpu); - static const char * const __hyp_panic_string[] = { [ARM_EXCEPTION_RESET] = "\nHYP panic: RST PC:%08x CPSR:%08x", [ARM_EXCEPTION_UNDEFINED] = "\nHYP panic: UNDEF PC:%08x CPSR:%08x", diff --git a/arch/arm/kvm/hyp/tlb.c b/arch/arm/kvm/hyp/tlb.c index a2636001e616..729652854f90 100644 --- a/arch/arm/kvm/hyp/tlb.c +++ b/arch/arm/kvm/hyp/tlb.c @@ -34,7 +34,7 @@ * As v7 does not support flushing per IPA, just nuke the whole TLB * instead, ignoring the ipa value. */ -static void __hyp_text __tlb_flush_vmid(struct kvm *kvm) +void __hyp_text __kvm_tlb_flush_vmid(struct kvm *kvm) { dsb(ishst); @@ -50,21 +50,14 @@ static void __hyp_text __tlb_flush_vmid(struct kvm *kvm) write_sysreg(0, VTTBR); } -__alias(__tlb_flush_vmid) void __kvm_tlb_flush_vmid(struct kvm *kvm); - -static void __hyp_text __tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa) +void __hyp_text __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa) { - __tlb_flush_vmid(kvm); + __kvm_tlb_flush_vmid(kvm); } -__alias(__tlb_flush_vmid_ipa) void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, - phys_addr_t ipa); - -static void __hyp_text __tlb_flush_vm_context(void) +void __hyp_text __kvm_flush_vm_context(void) { write_sysreg(0, TLBIALLNSNHIS); write_sysreg(0, ICIALLUIS); dsb(ish); } - -__alias(__tlb_flush_vm_context) void __kvm_flush_vm_context(void); diff --git a/arch/arm/kvm/mmio.c b/arch/arm/kvm/mmio.c index 10f80a6c797a..b6e715fd3c90 100644 --- a/arch/arm/kvm/mmio.c +++ b/arch/arm/kvm/mmio.c @@ -126,12 +126,6 @@ static int decode_hsr(struct kvm_vcpu *vcpu, bool *is_write, int *len) int access_size; bool sign_extend; - if (kvm_vcpu_dabt_isextabt(vcpu)) { - /* cache operation on I/O addr, tell guest unsupported */ - kvm_inject_dabt(vcpu, kvm_vcpu_get_hfar(vcpu)); - return 1; - } - if (kvm_vcpu_dabt_iss1tw(vcpu)) { /* page table accesses IO mem: tell guest to fix its TTBR */ kvm_inject_dabt(vcpu, kvm_vcpu_get_hfar(vcpu)); diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c index 29d0b23af2a9..a5265edbeeab 100644 --- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c @@ -744,7 +744,6 @@ int kvm_alloc_stage2_pgd(struct kvm *kvm) if (!pgd) return -ENOMEM; - kvm_clean_pgd(pgd); kvm->arch.pgd = pgd; return 0; } @@ -936,7 +935,6 @@ static int stage2_set_pte(struct kvm *kvm, struct kvm_mmu_memory_cache *cache, if (!cache) return 0; /* ignore calls from kvm_set_spte_hva */ pte = mmu_memory_cache_alloc(cache); - kvm_clean_pte(pte); pmd_populate_kernel(NULL, pmd, pte); get_page(virt_to_page(pmd)); } @@ -1434,6 +1432,11 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run) int ret, idx; is_iabt = kvm_vcpu_trap_is_iabt(vcpu); + if (unlikely(!is_iabt && kvm_vcpu_dabt_isextabt(vcpu))) { + kvm_inject_vabt(vcpu); + return 1; + } + fault_ipa = kvm_vcpu_get_fault_ipa(vcpu); trace_kvm_guest_fault(*vcpu_pc(vcpu), kvm_vcpu_get_hsr(vcpu), @@ -1714,7 +1717,8 @@ int kvm_mmu_init(void) kern_hyp_va(PAGE_OFFSET), kern_hyp_va(~0UL)); if (hyp_idmap_start >= kern_hyp_va(PAGE_OFFSET) && - hyp_idmap_start < kern_hyp_va(~0UL)) { + hyp_idmap_start < kern_hyp_va(~0UL) && + hyp_idmap_start != (unsigned long)__hyp_idmap_text_start) { /* * The idmap page is intersecting with the VA space, * it is not safe to continue further. @@ -1893,6 +1897,7 @@ void kvm_arch_memslots_updated(struct kvm *kvm, struct kvm_memslots *slots) void kvm_arch_flush_shadow_all(struct kvm *kvm) { + kvm_free_stage2_pgd(kvm); } void kvm_arch_flush_shadow_memslot(struct kvm *kvm, diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c index 8044591dca72..2cef11884857 100644 --- a/arch/arm/lib/delay.c +++ b/arch/arm/lib/delay.c @@ -29,7 +29,7 @@ /* * Default to the loop-based delay implementation. */ -struct arm_delay_ops arm_delay_ops = { +struct arm_delay_ops arm_delay_ops __ro_after_init = { .delay = __loop_delay, .const_udelay = __loop_const_udelay, .udelay = __loop_udelay, diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 5204395efda8..841e924143f9 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -55,7 +55,6 @@ config SOC_AT91RM9200 select ATMEL_ST select CPU_ARM920T select HAVE_AT91_USB_CLK - select MIGHT_HAVE_PCI select PINCTRL_AT91 select SOC_SAM_V4_V5 select SRAM if PM diff --git a/arch/arm/mach-axxia/Kconfig b/arch/arm/mach-axxia/Kconfig index 6c6d5e76565b..fe627cbcfdc5 100644 --- a/arch/arm/mach-axxia/Kconfig +++ b/arch/arm/mach-axxia/Kconfig @@ -7,8 +7,6 @@ config ARCH_AXXIA select ARM_TIMER_SP804 select HAVE_ARM_ARCH_TIMER select MFD_SYSCON - select MIGHT_HAVE_PCI - select PCI_DOMAINS if PCI select ZONE_DMA help This enables support for the LSI Axxia devices. diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index 6a6302d1b40f..a0e66d8200c5 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -15,7 +15,6 @@ config ARCH_BCM_IPROC select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select ARM_GLOBAL_TIMER - select COMMON_CLK_IPROC select CLKSRC_MMIO select GPIOLIB select ARM_AMBA diff --git a/arch/arm/mach-clps711x/Makefile.boot b/arch/arm/mach-clps711x/Makefile.boot deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/arch/arm/mach-clps711x/Makefile.boot +++ /dev/null diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c deleted file mode 100644 index ba3d7d1b28f8..000000000000 --- a/arch/arm/mach-clps711x/board-autcpu12.c +++ /dev/null @@ -1,275 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/autcpu12.c - * - * (c) 2001 Thomas Gleixner, autronix automation <gleixner@autronix.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/plat-ram.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/nand-gpio.h> -#include <linux/platform_device.h> -#include <linux/gpio/driver.h> - -#include <mach/hardware.h> -#include <asm/sizes.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/pgtable.h> -#include <asm/page.h> - -#include <asm/mach/map.h> - -#include "common.h" -#include "devices.h" - -/* NOR flash */ -#define AUTCPU12_FLASH_BASE (CS0_PHYS_BASE) - -/* Board specific hardware definitions */ -#define AUTCPU12_CHAR_LCD_BASE (CS1_PHYS_BASE + 0x00000000) -#define AUTCPU12_CSAUX1_BASE (CS1_PHYS_BASE + 0x04000000) -#define AUTCPU12_CAN_BASE (CS1_PHYS_BASE + 0x08000000) -#define AUTCPU12_TOUCH_BASE (CS1_PHYS_BASE + 0x0a000000) -#define AUTCPU12_IO_BASE (CS1_PHYS_BASE + 0x0c000000) -#define AUTCPU12_LPT_BASE (CS1_PHYS_BASE + 0x0e000000) - -/* NVRAM */ -#define AUTCPU12_NVRAM_BASE (CS1_PHYS_BASE + 0x02000000) - -/* SmartMedia flash */ -#define AUTCPU12_SMC_BASE (CS1_PHYS_BASE + 0x06000000) -#define AUTCPU12_SMC_SEL_BASE (AUTCPU12_SMC_BASE + 0x10) - -/* Ethernet */ -#define AUTCPU12_CS8900_BASE (CS2_PHYS_BASE + 0x300) -#define AUTCPU12_CS8900_IRQ (IRQ_EINT3) - -/* NAND flash */ -#define AUTCPU12_MMGPIO_BASE (CLPS711X_NR_GPIO) -#define AUTCPU12_SMC_NCE (AUTCPU12_MMGPIO_BASE + 0) /* Bit 0 */ -#define AUTCPU12_SMC_RDY CLPS711X_GPIO(1, 2) -#define AUTCPU12_SMC_ALE CLPS711X_GPIO(1, 3) -#define AUTCPU12_SMC_CLE CLPS711X_GPIO(1, 4) - -/* LCD contrast digital potentiometer */ -#define AUTCPU12_DPOT_CS CLPS711X_GPIO(4, 0) -#define AUTCPU12_DPOT_CLK CLPS711X_GPIO(4, 1) -#define AUTCPU12_DPOT_UD CLPS711X_GPIO(4, 2) - -static struct resource autcpu12_cs8900_resource[] __initdata = { - DEFINE_RES_MEM(AUTCPU12_CS8900_BASE, SZ_1K), - DEFINE_RES_IRQ(AUTCPU12_CS8900_IRQ), -}; - -static struct resource autcpu12_nand_resource[] __initdata = { - DEFINE_RES_MEM(AUTCPU12_SMC_BASE, SZ_16), -}; - -static struct mtd_partition autcpu12_nand_parts[] __initdata = { - { - .name = "Flash partition 1", - .offset = 0, - .size = SZ_8M, - }, - { - .name = "Flash partition 2", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static void __init autcpu12_adjust_parts(struct gpio_nand_platdata *pdata, - size_t sz) -{ - switch (sz) { - case SZ_16M: - case SZ_32M: - break; - case SZ_64M: - case SZ_128M: - pdata->parts[0].size = SZ_16M; - break; - default: - pr_warn("Unsupported SmartMedia device size %u\n", sz); - break; - } -} - -static struct gpio_nand_platdata autcpu12_nand_pdata __initdata = { - .gpio_rdy = AUTCPU12_SMC_RDY, - .gpio_nce = AUTCPU12_SMC_NCE, - .gpio_ale = AUTCPU12_SMC_ALE, - .gpio_cle = AUTCPU12_SMC_CLE, - .gpio_nwp = -1, - .chip_delay = 20, - .parts = autcpu12_nand_parts, - .num_parts = ARRAY_SIZE(autcpu12_nand_parts), - .adjust_parts = autcpu12_adjust_parts, -}; - -static struct platform_device autcpu12_nand_pdev __initdata = { - .name = "gpio-nand", - .id = -1, - .resource = autcpu12_nand_resource, - .num_resources = ARRAY_SIZE(autcpu12_nand_resource), - .dev = { - .platform_data = &autcpu12_nand_pdata, - }, -}; - -static struct resource autcpu12_mmgpio_resource[] __initdata = { - DEFINE_RES_MEM_NAMED(AUTCPU12_SMC_SEL_BASE, SZ_1, "dat"), -}; - -static struct bgpio_pdata autcpu12_mmgpio_pdata __initdata = { - .base = AUTCPU12_MMGPIO_BASE, - .ngpio = 8, -}; - -static struct platform_device autcpu12_mmgpio_pdev __initdata = { - .name = "basic-mmio-gpio", - .id = -1, - .resource = autcpu12_mmgpio_resource, - .num_resources = ARRAY_SIZE(autcpu12_mmgpio_resource), - .dev = { - .platform_data = &autcpu12_mmgpio_pdata, - }, -}; - -static const struct gpio const autcpu12_gpios[] __initconst = { - { AUTCPU12_DPOT_CS, GPIOF_OUT_INIT_HIGH, "DPOT CS" }, - { AUTCPU12_DPOT_CLK, GPIOF_OUT_INIT_LOW, "DPOT CLK" }, - { AUTCPU12_DPOT_UD, GPIOF_OUT_INIT_LOW, "DPOT UD" }, -}; - -static struct mtd_partition autcpu12_flash_partitions[] = { - { - .name = "NOR.0", - .offset = 0, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct physmap_flash_data autcpu12_flash_pdata = { - .width = 4, - .parts = autcpu12_flash_partitions, - .nr_parts = ARRAY_SIZE(autcpu12_flash_partitions), -}; - -static struct resource autcpu12_flash_resources[] __initdata = { - DEFINE_RES_MEM(AUTCPU12_FLASH_BASE, SZ_8M), -}; - -static struct platform_device autcpu12_flash_pdev __initdata = { - .name = "physmap-flash", - .id = 0, - .resource = autcpu12_flash_resources, - .num_resources = ARRAY_SIZE(autcpu12_flash_resources), - .dev = { - .platform_data = &autcpu12_flash_pdata, - }, -}; - -static struct resource autcpu12_nvram_resource[] __initdata = { - DEFINE_RES_MEM(AUTCPU12_NVRAM_BASE, 0), -}; - -static struct platdata_mtd_ram autcpu12_nvram_pdata = { - .bankwidth = 4, -}; - -static struct platform_device autcpu12_nvram_pdev __initdata = { - .name = "mtd-ram", - .id = 0, - .resource = autcpu12_nvram_resource, - .num_resources = ARRAY_SIZE(autcpu12_nvram_resource), - .dev = { - .platform_data = &autcpu12_nvram_pdata, - }, -}; - -static void __init autcpu12_nvram_init(void) -{ - void __iomem *nvram; - unsigned int save[2]; - resource_size_t nvram_size = SZ_128K; - - /* - * Check for 32K/128K - * Read ofs 0K - * Read ofs 64K - * Write complement to ofs 64K - * Read and check result on ofs 0K - * Restore contents - */ - nvram = ioremap(autcpu12_nvram_resource[0].start, SZ_128K); - if (nvram) { - save[0] = readl(nvram + 0); - save[1] = readl(nvram + SZ_64K); - writel(~save[0], nvram + SZ_64K); - if (readl(nvram + 0) != save[0]) { - writel(save[0], nvram + 0); - nvram_size = SZ_32K; - } else - writel(save[1], nvram + SZ_64K); - iounmap(nvram); - - autcpu12_nvram_resource[0].end = - autcpu12_nvram_resource[0].start + nvram_size - 1; - platform_device_register(&autcpu12_nvram_pdev); - } else - pr_err("Failed to remap NVRAM resource\n"); -} - -static void __init autcpu12_init(void) -{ - clps711x_devices_init(); - platform_device_register(&autcpu12_flash_pdev); - platform_device_register_simple("video-clps711x", 0, NULL, 0); - platform_device_register_simple("cs89x0", 0, autcpu12_cs8900_resource, - ARRAY_SIZE(autcpu12_cs8900_resource)); - platform_device_register(&autcpu12_mmgpio_pdev); - autcpu12_nvram_init(); -} - -static void __init autcpu12_init_late(void) -{ - gpio_request_array(autcpu12_gpios, ARRAY_SIZE(autcpu12_gpios)); - platform_device_register(&autcpu12_nand_pdev); -} - -MACHINE_START(AUTCPU12, "autronix autcpu12") - /* Maintainer: Thomas Gleixner */ - .atag_offset = 0x20000, - .map_io = clps711x_map_io, - .init_irq = clps711x_init_irq, - .init_time = clps711x_timer_init, - .init_machine = autcpu12_init, - .init_late = autcpu12_init_late, - .restart = clps711x_restart, -MACHINE_END - diff --git a/arch/arm/mach-clps711x/board-cdb89712.c b/arch/arm/mach-clps711x/board-cdb89712.c deleted file mode 100644 index 972abdb10028..000000000000 --- a/arch/arm/mach-clps711x/board-cdb89712.c +++ /dev/null @@ -1,147 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/cdb89712.c - * - * Copyright (C) 2000-2001 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/io.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> - -#include <linux/mtd/physmap.h> -#include <linux/mtd/plat-ram.h> -#include <linux/mtd/partitions.h> - -#include <mach/hardware.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "common.h" -#include "devices.h" - -#define CDB89712_CS8900_BASE (CS2_PHYS_BASE + 0x300) -#define CDB89712_CS8900_IRQ (IRQ_EINT3) - -static struct resource cdb89712_cs8900_resource[] __initdata = { - DEFINE_RES_MEM(CDB89712_CS8900_BASE, SZ_1K), - DEFINE_RES_IRQ(CDB89712_CS8900_IRQ), -}; - -static struct mtd_partition cdb89712_flash_partitions[] __initdata = { - { - .name = "Flash", - .offset = 0, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct physmap_flash_data cdb89712_flash_pdata __initdata = { - .width = 4, - .probe_type = "map_rom", - .parts = cdb89712_flash_partitions, - .nr_parts = ARRAY_SIZE(cdb89712_flash_partitions), -}; - -static struct resource cdb89712_flash_resources[] __initdata = { - DEFINE_RES_MEM(CS0_PHYS_BASE, SZ_8M), -}; - -static struct platform_device cdb89712_flash_pdev __initdata = { - .name = "physmap-flash", - .id = 0, - .resource = cdb89712_flash_resources, - .num_resources = ARRAY_SIZE(cdb89712_flash_resources), - .dev = { - .platform_data = &cdb89712_flash_pdata, - }, -}; - -static struct mtd_partition cdb89712_bootrom_partitions[] __initdata = { - { - .name = "BootROM", - .offset = 0, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct physmap_flash_data cdb89712_bootrom_pdata __initdata = { - .width = 4, - .probe_type = "map_rom", - .parts = cdb89712_bootrom_partitions, - .nr_parts = ARRAY_SIZE(cdb89712_bootrom_partitions), -}; - -static struct resource cdb89712_bootrom_resources[] __initdata = { - DEFINE_RES_NAMED(CS7_PHYS_BASE, SZ_128, "BOOTROM", IORESOURCE_MEM | - IORESOURCE_READONLY), -}; - -static struct platform_device cdb89712_bootrom_pdev __initdata = { - .name = "physmap-flash", - .id = 1, - .resource = cdb89712_bootrom_resources, - .num_resources = ARRAY_SIZE(cdb89712_bootrom_resources), - .dev = { - .platform_data = &cdb89712_bootrom_pdata, - }, -}; - -static struct platdata_mtd_ram cdb89712_sram_pdata __initdata = { - .bankwidth = 4, -}; - -static struct resource cdb89712_sram_resources[] __initdata = { - DEFINE_RES_MEM(CLPS711X_SRAM_BASE, CLPS711X_SRAM_SIZE), -}; - -static struct platform_device cdb89712_sram_pdev __initdata = { - .name = "mtd-ram", - .id = 0, - .resource = cdb89712_sram_resources, - .num_resources = ARRAY_SIZE(cdb89712_sram_resources), - .dev = { - .platform_data = &cdb89712_sram_pdata, - }, -}; - -static void __init cdb89712_init(void) -{ - clps711x_devices_init(); - platform_device_register(&cdb89712_flash_pdev); - platform_device_register(&cdb89712_bootrom_pdev); - platform_device_register(&cdb89712_sram_pdev); - platform_device_register_simple("cs89x0", 0, cdb89712_cs8900_resource, - ARRAY_SIZE(cdb89712_cs8900_resource)); -} - -MACHINE_START(CDB89712, "Cirrus-CDB89712") - /* Maintainer: Ray Lehtiniemi */ - .atag_offset = 0x100, - .map_io = clps711x_map_io, - .init_irq = clps711x_init_irq, - .init_time = clps711x_timer_init, - .init_machine = cdb89712_init, - .restart = clps711x_restart, -MACHINE_END diff --git a/arch/arm/mach-clps711x/board-clep7312.c b/arch/arm/mach-clps711x/board-clep7312.c deleted file mode 100644 index f9ca22b646bf..000000000000 --- a/arch/arm/mach-clps711x/board-clep7312.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/clep7312.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/init.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/memblock.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "common.h" -#include "devices.h" - -static void __init -fixup_clep7312(struct tag *tags, char **cmdline) -{ - memblock_add(0xc0000000, 0x01000000); -} - -MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312") - /* Maintainer: Nobody */ - .atag_offset = 0x0100, - .fixup = fixup_clep7312, - .map_io = clps711x_map_io, - .init_irq = clps711x_init_irq, - .init_time = clps711x_timer_init, - .init_machine = clps711x_devices_init, - .restart = clps711x_restart, -MACHINE_END diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c deleted file mode 100644 index f33979784f38..000000000000 --- a/arch/arm/mach-clps711x/board-edb7211.c +++ /dev/null @@ -1,188 +0,0 @@ -/* - * Copyright (C) 2000, 2001 Blue Mug, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/delay.h> -#include <linux/memblock.h> -#include <linux/types.h> -#include <linux/i2c-gpio.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/pwm.h> -#include <linux/pwm_backlight.h> -#include <linux/memblock.h> - -#include <linux/mtd/physmap.h> -#include <linux/mtd/partitions.h> - -#include <asm/setup.h> -#include <asm/mach/map.h> -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include <video/platform_lcd.h> - -#include <mach/hardware.h> - -#include "common.h" -#include "devices.h" - -#define VIDEORAM_SIZE SZ_128K - -#define EDB7211_LCD_DC_DC_EN CLPS711X_GPIO(3, 1) -#define EDB7211_LCDEN CLPS711X_GPIO(3, 2) -#define EDB7211_LCDBL CLPS711X_GPIO(3, 3) - -#define EDB7211_I2C_SDA CLPS711X_GPIO(3, 4) -#define EDB7211_I2C_SCL CLPS711X_GPIO(3, 5) - -#define EDB7211_FLASH0_BASE (CS0_PHYS_BASE) -#define EDB7211_FLASH1_BASE (CS1_PHYS_BASE) - -#define EDB7211_CS8900_BASE (CS2_PHYS_BASE + 0x300) -#define EDB7211_CS8900_IRQ (IRQ_EINT3) - -/* The extra 8 lines of the keyboard matrix */ -#define EDB7211_EXTKBD_BASE (CS3_PHYS_BASE) - -static struct i2c_gpio_platform_data edb7211_i2c_pdata __initdata = { - .sda_pin = EDB7211_I2C_SDA, - .scl_pin = EDB7211_I2C_SCL, - .scl_is_output_only = 1, -}; - -static struct resource edb7211_cs8900_resource[] __initdata = { - DEFINE_RES_MEM(EDB7211_CS8900_BASE, SZ_1K), - DEFINE_RES_IRQ(EDB7211_CS8900_IRQ), -}; - -static struct mtd_partition edb7211_flash_partitions[] __initdata = { - { - .name = "Flash", - .offset = 0, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct physmap_flash_data edb7211_flash_pdata __initdata = { - .width = 4, - .parts = edb7211_flash_partitions, - .nr_parts = ARRAY_SIZE(edb7211_flash_partitions), -}; - -static struct resource edb7211_flash_resources[] __initdata = { - DEFINE_RES_MEM(EDB7211_FLASH0_BASE, SZ_8M), - DEFINE_RES_MEM(EDB7211_FLASH1_BASE, SZ_8M), -}; - -static struct platform_device edb7211_flash_pdev __initdata = { - .name = "physmap-flash", - .id = 0, - .resource = edb7211_flash_resources, - .num_resources = ARRAY_SIZE(edb7211_flash_resources), - .dev = { - .platform_data = &edb7211_flash_pdata, - }, -}; - -static void edb7211_lcd_power_set(struct plat_lcd_data *pd, unsigned int power) -{ - if (power) { - gpio_set_value(EDB7211_LCDEN, 1); - udelay(100); - gpio_set_value(EDB7211_LCD_DC_DC_EN, 1); - } else { - gpio_set_value(EDB7211_LCD_DC_DC_EN, 0); - udelay(100); - gpio_set_value(EDB7211_LCDEN, 0); - } -} - -static struct plat_lcd_data edb7211_lcd_power_pdata = { - .set_power = edb7211_lcd_power_set, -}; - -static struct pwm_lookup edb7211_pwm_lookup[] = { - PWM_LOOKUP("clps711x-pwm", 0, "pwm-backlight.0", NULL, - 0, PWM_POLARITY_NORMAL), -}; - -static struct platform_pwm_backlight_data pwm_bl_pdata = { - .dft_brightness = 0x01, - .max_brightness = 0x0f, - .enable_gpio = EDB7211_LCDBL, -}; - -static struct resource clps711x_pwm_res = - DEFINE_RES_MEM(CLPS711X_PHYS_BASE + PMPCON, SZ_4); - -static struct gpio edb7211_gpios[] __initconst = { - { EDB7211_LCD_DC_DC_EN, GPIOF_OUT_INIT_LOW, "LCD DC-DC" }, - { EDB7211_LCDEN, GPIOF_OUT_INIT_LOW, "LCD POWER" }, -}; - -/* Reserve screen memory region at the start of main system memory. */ -static void __init edb7211_reserve(void) -{ - memblock_reserve(PHYS_OFFSET, VIDEORAM_SIZE); -} - -static void __init -fixup_edb7211(struct tag *tags, char **cmdline) -{ - /* - * Bank start addresses are not present in the information - * passed in from the boot loader. We could potentially - * detect them, but instead we hard-code them. - * - * Banks sizes _are_ present in the param block, but we're - * not using that information yet. - */ - memblock_add(0xc0000000, SZ_8M); - memblock_add(0xc1000000, SZ_8M); -} - -static void __init edb7211_init_late(void) -{ - gpio_request_array(edb7211_gpios, ARRAY_SIZE(edb7211_gpios)); - - platform_device_register(&edb7211_flash_pdev); - - platform_device_register_data(NULL, "platform-lcd", 0, - &edb7211_lcd_power_pdata, - sizeof(edb7211_lcd_power_pdata)); - - platform_device_register_simple("clps711x-pwm", PLATFORM_DEVID_NONE, - &clps711x_pwm_res, 1); - pwm_add_table(edb7211_pwm_lookup, ARRAY_SIZE(edb7211_pwm_lookup)); - - platform_device_register_data(&platform_bus, "pwm-backlight", 0, - &pwm_bl_pdata, sizeof(pwm_bl_pdata)); - - platform_device_register_simple("video-clps711x", 0, NULL, 0); - platform_device_register_simple("cs89x0", 0, edb7211_cs8900_resource, - ARRAY_SIZE(edb7211_cs8900_resource)); - platform_device_register_data(NULL, "i2c-gpio", 0, - &edb7211_i2c_pdata, - sizeof(edb7211_i2c_pdata)); -} - -MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)") - /* Maintainer: Jon McClintock */ - .atag_offset = VIDEORAM_SIZE + 0x100, - .fixup = fixup_edb7211, - .reserve = edb7211_reserve, - .map_io = clps711x_map_io, - .init_irq = clps711x_init_irq, - .init_time = clps711x_timer_init, - .init_machine = clps711x_devices_init, - .init_late = edb7211_init_late, - .restart = clps711x_restart, -MACHINE_END diff --git a/arch/arm/mach-clps711x/board-p720t.c b/arch/arm/mach-clps711x/board-p720t.c deleted file mode 100644 index 80a16a8b3776..000000000000 --- a/arch/arm/mach-clps711x/board-p720t.c +++ /dev/null @@ -1,373 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/p720t.c - * - * Copyright (C) 2000-2001 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/slab.h> -#include <linux/leds.h> -#include <linux/sizes.h> -#include <linux/backlight.h> -#include <linux/gpio/driver.h> -#include <linux/platform_device.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/nand-gpio.h> - -#include <mach/hardware.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <video/platform_lcd.h> - -#include "common.h" -#include "devices.h" - -#define P720T_USERLED CLPS711X_GPIO(3, 0) -#define P720T_NAND_CLE CLPS711X_GPIO(4, 0) -#define P720T_NAND_ALE CLPS711X_GPIO(4, 1) -#define P720T_NAND_NCE CLPS711X_GPIO(4, 2) - -#define P720T_NAND_BASE (CLPS711X_SDRAM1_BASE) - -#define P720T_MMGPIO_BASE (CLPS711X_NR_GPIO) - -#define SYSPLD_PHYS_BASE IOMEM(CS1_PHYS_BASE) - -#define PLD_INT (SYSPLD_PHYS_BASE + 0x000000) -#define PLD_INT_MMGPIO_BASE (P720T_MMGPIO_BASE + 0) -#define PLD_INT_PENIRQ (PLD_INT_MMGPIO_BASE + 5) -#define PLD_INT_UCB_IRQ (PLD_INT_MMGPIO_BASE + 1) -#define PLD_INT_KBD_ATN (PLD_INT_MMGPIO_BASE + 0) /* EINT1 */ - -#define PLD_PWR (SYSPLD_PHYS_BASE + 0x000004) -#define PLD_PWR_MMGPIO_BASE (P720T_MMGPIO_BASE + 8) -#define PLD_PWR_EXT (PLD_PWR_MMGPIO_BASE + 5) -#define PLD_PWR_MODE (PLD_PWR_MMGPIO_BASE + 4) /* 1 = PWM, 0 = PFM */ -#define PLD_S4_ON (PLD_PWR_MMGPIO_BASE + 3) /* LCD bias voltage enable */ -#define PLD_S3_ON (PLD_PWR_MMGPIO_BASE + 2) /* LCD backlight enable */ -#define PLD_S2_ON (PLD_PWR_MMGPIO_BASE + 1) /* LCD 3V3 supply enable */ -#define PLD_S1_ON (PLD_PWR_MMGPIO_BASE + 0) /* LCD 3V supply enable */ - -#define PLD_KBD (SYSPLD_PHYS_BASE + 0x000008) -#define PLD_KBD_MMGPIO_BASE (P720T_MMGPIO_BASE + 16) -#define PLD_KBD_WAKE (PLD_KBD_MMGPIO_BASE + 1) -#define PLD_KBD_EN (PLD_KBD_MMGPIO_BASE + 0) - -#define PLD_SPI (SYSPLD_PHYS_BASE + 0x00000c) -#define PLD_SPI_MMGPIO_BASE (P720T_MMGPIO_BASE + 24) -#define PLD_SPI_EN (PLD_SPI_MMGPIO_BASE + 0) - -#define PLD_IO (SYSPLD_PHYS_BASE + 0x000010) -#define PLD_IO_MMGPIO_BASE (P720T_MMGPIO_BASE + 32) -#define PLD_IO_BOOTSEL (PLD_IO_MMGPIO_BASE + 6) /* Boot sel switch */ -#define PLD_IO_USER (PLD_IO_MMGPIO_BASE + 5) /* User defined switch */ -#define PLD_IO_LED3 (PLD_IO_MMGPIO_BASE + 4) -#define PLD_IO_LED2 (PLD_IO_MMGPIO_BASE + 3) -#define PLD_IO_LED1 (PLD_IO_MMGPIO_BASE + 2) -#define PLD_IO_LED0 (PLD_IO_MMGPIO_BASE + 1) -#define PLD_IO_LEDEN (PLD_IO_MMGPIO_BASE + 0) - -#define PLD_IRDA (SYSPLD_PHYS_BASE + 0x000014) -#define PLD_IRDA_MMGPIO_BASE (P720T_MMGPIO_BASE + 40) -#define PLD_IRDA_EN (PLD_IRDA_MMGPIO_BASE + 0) - -#define PLD_COM2 (SYSPLD_PHYS_BASE + 0x000018) -#define PLD_COM2_MMGPIO_BASE (P720T_MMGPIO_BASE + 48) -#define PLD_COM2_EN (PLD_COM2_MMGPIO_BASE + 0) - -#define PLD_COM1 (SYSPLD_PHYS_BASE + 0x00001c) -#define PLD_COM1_MMGPIO_BASE (P720T_MMGPIO_BASE + 56) -#define PLD_COM1_EN (PLD_COM1_MMGPIO_BASE + 0) - -#define PLD_AUD (SYSPLD_PHYS_BASE + 0x000020) -#define PLD_AUD_MMGPIO_BASE (P720T_MMGPIO_BASE + 64) -#define PLD_AUD_DIV1 (PLD_AUD_MMGPIO_BASE + 6) -#define PLD_AUD_DIV0 (PLD_AUD_MMGPIO_BASE + 5) -#define PLD_AUD_CLK_SEL1 (PLD_AUD_MMGPIO_BASE + 4) -#define PLD_AUD_CLK_SEL0 (PLD_AUD_MMGPIO_BASE + 3) -#define PLD_AUD_MIC_PWR (PLD_AUD_MMGPIO_BASE + 2) -#define PLD_AUD_MIC_GAIN (PLD_AUD_MMGPIO_BASE + 1) -#define PLD_AUD_CODEC_EN (PLD_AUD_MMGPIO_BASE + 0) - -#define PLD_CF (SYSPLD_PHYS_BASE + 0x000024) -#define PLD_CF_MMGPIO_BASE (P720T_MMGPIO_BASE + 72) -#define PLD_CF2_SLEEP (PLD_CF_MMGPIO_BASE + 5) -#define PLD_CF1_SLEEP (PLD_CF_MMGPIO_BASE + 4) -#define PLD_CF2_nPDREQ (PLD_CF_MMGPIO_BASE + 3) -#define PLD_CF1_nPDREQ (PLD_CF_MMGPIO_BASE + 2) -#define PLD_CF2_nIRQ (PLD_CF_MMGPIO_BASE + 1) -#define PLD_CF1_nIRQ (PLD_CF_MMGPIO_BASE + 0) - -#define PLD_SDC (SYSPLD_PHYS_BASE + 0x000028) -#define PLD_SDC_MMGPIO_BASE (P720T_MMGPIO_BASE + 80) -#define PLD_SDC_INT_EN (PLD_SDC_MMGPIO_BASE + 2) -#define PLD_SDC_WP (PLD_SDC_MMGPIO_BASE + 1) -#define PLD_SDC_CD (PLD_SDC_MMGPIO_BASE + 0) - -#define PLD_CODEC (SYSPLD_PHYS_BASE + 0x400000) -#define PLD_CODEC_MMGPIO_BASE (P720T_MMGPIO_BASE + 88) -#define PLD_CODEC_IRQ3 (PLD_CODEC_MMGPIO_BASE + 4) -#define PLD_CODEC_IRQ2 (PLD_CODEC_MMGPIO_BASE + 3) -#define PLD_CODEC_IRQ1 (PLD_CODEC_MMGPIO_BASE + 2) -#define PLD_CODEC_EN (PLD_CODEC_MMGPIO_BASE + 0) - -#define PLD_BRITE (SYSPLD_PHYS_BASE + 0x400004) -#define PLD_BRITE_MMGPIO_BASE (P720T_MMGPIO_BASE + 96) -#define PLD_BRITE_UP (PLD_BRITE_MMGPIO_BASE + 1) -#define PLD_BRITE_DN (PLD_BRITE_MMGPIO_BASE + 0) - -#define PLD_LCDEN (SYSPLD_PHYS_BASE + 0x400008) -#define PLD_LCDEN_MMGPIO_BASE (P720T_MMGPIO_BASE + 104) -#define PLD_LCDEN_EN (PLD_LCDEN_MMGPIO_BASE + 0) - -#define PLD_TCH (SYSPLD_PHYS_BASE + 0x400010) -#define PLD_TCH_MMGPIO_BASE (P720T_MMGPIO_BASE + 112) -#define PLD_TCH_PENIRQ (PLD_TCH_MMGPIO_BASE + 1) -#define PLD_TCH_EN (PLD_TCH_MMGPIO_BASE + 0) - -#define PLD_GPIO (SYSPLD_PHYS_BASE + 0x400014) -#define PLD_GPIO_MMGPIO_BASE (P720T_MMGPIO_BASE + 120) -#define PLD_GPIO2 (PLD_GPIO_MMGPIO_BASE + 2) -#define PLD_GPIO1 (PLD_GPIO_MMGPIO_BASE + 1) -#define PLD_GPIO0 (PLD_GPIO_MMGPIO_BASE + 0) - -static struct gpio p720t_gpios[] __initconst = { - { PLD_S1_ON, GPIOF_OUT_INIT_LOW, "PLD_S1_ON" }, - { PLD_S2_ON, GPIOF_OUT_INIT_LOW, "PLD_S2_ON" }, - { PLD_S3_ON, GPIOF_OUT_INIT_LOW, "PLD_S3_ON" }, - { PLD_S4_ON, GPIOF_OUT_INIT_LOW, "PLD_S4_ON" }, - { PLD_KBD_EN, GPIOF_OUT_INIT_LOW, "PLD_KBD_EN" }, - { PLD_SPI_EN, GPIOF_OUT_INIT_LOW, "PLD_SPI_EN" }, - { PLD_IO_USER, GPIOF_OUT_INIT_LOW, "PLD_IO_USER" }, - { PLD_IO_LED0, GPIOF_OUT_INIT_LOW, "PLD_IO_LED0" }, - { PLD_IO_LED1, GPIOF_OUT_INIT_LOW, "PLD_IO_LED1" }, - { PLD_IO_LED2, GPIOF_OUT_INIT_LOW, "PLD_IO_LED2" }, - { PLD_IO_LED3, GPIOF_OUT_INIT_LOW, "PLD_IO_LED3" }, - { PLD_IO_LEDEN, GPIOF_OUT_INIT_LOW, "PLD_IO_LEDEN" }, - { PLD_IRDA_EN, GPIOF_OUT_INIT_LOW, "PLD_IRDA_EN" }, - { PLD_COM1_EN, GPIOF_OUT_INIT_HIGH, "PLD_COM1_EN" }, - { PLD_COM2_EN, GPIOF_OUT_INIT_HIGH, "PLD_COM2_EN" }, - { PLD_CODEC_EN, GPIOF_OUT_INIT_LOW, "PLD_CODEC_EN" }, - { PLD_LCDEN_EN, GPIOF_OUT_INIT_LOW, "PLD_LCDEN_EN" }, - { PLD_TCH_EN, GPIOF_OUT_INIT_LOW, "PLD_TCH_EN" }, - { P720T_USERLED,GPIOF_OUT_INIT_LOW, "USER_LED" }, -}; - -static struct resource p720t_mmgpio_resource[] __initdata = { - DEFINE_RES_MEM_NAMED(0, 4, "dat"), -}; - -static struct bgpio_pdata p720t_mmgpio_pdata = { - .ngpio = 8, -}; - -static struct platform_device p720t_mmgpio __initdata = { - .name = "basic-mmio-gpio", - .id = -1, - .resource = p720t_mmgpio_resource, - .num_resources = ARRAY_SIZE(p720t_mmgpio_resource), - .dev = { - .platform_data = &p720t_mmgpio_pdata, - }, -}; - -static void __init p720t_mmgpio_init(void __iomem *addrbase, int gpiobase) -{ - p720t_mmgpio_resource[0].start = (unsigned long)addrbase; - p720t_mmgpio_pdata.base = gpiobase; - - platform_device_register(&p720t_mmgpio); -} - -static struct { - void __iomem *addrbase; - int gpiobase; -} mmgpios[] __initconst = { - { PLD_INT, PLD_INT_MMGPIO_BASE }, - { PLD_PWR, PLD_PWR_MMGPIO_BASE }, - { PLD_KBD, PLD_KBD_MMGPIO_BASE }, - { PLD_SPI, PLD_SPI_MMGPIO_BASE }, - { PLD_IO, PLD_IO_MMGPIO_BASE }, - { PLD_IRDA, PLD_IRDA_MMGPIO_BASE }, - { PLD_COM2, PLD_COM2_MMGPIO_BASE }, - { PLD_COM1, PLD_COM1_MMGPIO_BASE }, - { PLD_AUD, PLD_AUD_MMGPIO_BASE }, - { PLD_CF, PLD_CF_MMGPIO_BASE }, - { PLD_SDC, PLD_SDC_MMGPIO_BASE }, - { PLD_CODEC, PLD_CODEC_MMGPIO_BASE }, - { PLD_BRITE, PLD_BRITE_MMGPIO_BASE }, - { PLD_LCDEN, PLD_LCDEN_MMGPIO_BASE }, - { PLD_TCH, PLD_TCH_MMGPIO_BASE }, - { PLD_GPIO, PLD_GPIO_MMGPIO_BASE }, -}; - -static struct resource p720t_nand_resource[] __initdata = { - DEFINE_RES_MEM(P720T_NAND_BASE, SZ_4), -}; - -static struct mtd_partition p720t_nand_parts[] __initdata = { - { - .name = "Flash partition 1", - .offset = 0, - .size = SZ_2M, - }, - { - .name = "Flash partition 2", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct gpio_nand_platdata p720t_nand_pdata __initdata = { - .gpio_rdy = -1, - .gpio_nce = P720T_NAND_NCE, - .gpio_ale = P720T_NAND_ALE, - .gpio_cle = P720T_NAND_CLE, - .gpio_nwp = -1, - .chip_delay = 15, - .parts = p720t_nand_parts, - .num_parts = ARRAY_SIZE(p720t_nand_parts), -}; - -static struct platform_device p720t_nand_pdev __initdata = { - .name = "gpio-nand", - .id = -1, - .resource = p720t_nand_resource, - .num_resources = ARRAY_SIZE(p720t_nand_resource), - .dev = { - .platform_data = &p720t_nand_pdata, - }, -}; - -static void p720t_lcd_power_set(struct plat_lcd_data *pd, unsigned int power) -{ - if (power) { - gpio_set_value(PLD_LCDEN_EN, 1); - gpio_set_value(PLD_S1_ON, 1); - gpio_set_value(PLD_S2_ON, 1); - gpio_set_value(PLD_S4_ON, 1); - } else { - gpio_set_value(PLD_S1_ON, 0); - gpio_set_value(PLD_S2_ON, 0); - gpio_set_value(PLD_S4_ON, 0); - gpio_set_value(PLD_LCDEN_EN, 0); - } -} - -static struct plat_lcd_data p720t_lcd_power_pdata = { - .set_power = p720t_lcd_power_set, -}; - -static void p720t_lcd_backlight_set_intensity(int intensity) -{ - gpio_set_value(PLD_S3_ON, intensity); -} - -static struct generic_bl_info p720t_lcd_backlight_pdata = { - .name = "lcd-backlight.0", - .default_intensity = 0x01, - .max_intensity = 0x01, - .set_bl_intensity = p720t_lcd_backlight_set_intensity, -}; - -static void __init -fixup_p720t(struct tag *tag, char **cmdline) -{ - /* - * Our bootloader doesn't setup any tags (yet). - */ - if (tag->hdr.tag != ATAG_CORE) { - tag->hdr.tag = ATAG_CORE; - tag->hdr.size = tag_size(tag_core); - tag->u.core.flags = 0; - tag->u.core.pagesize = PAGE_SIZE; - tag->u.core.rootdev = 0x0100; - - tag = tag_next(tag); - tag->hdr.tag = ATAG_MEM; - tag->hdr.size = tag_size(tag_mem32); - tag->u.mem.size = 4096; - tag->u.mem.start = PHYS_OFFSET; - - tag = tag_next(tag); - tag->hdr.tag = ATAG_NONE; - tag->hdr.size = 0; - } -} - -static struct gpio_led p720t_gpio_leds[] = { - { - .name = "User LED", - .default_trigger = "heartbeat", - .gpio = P720T_USERLED, - }, -}; - -static struct gpio_led_platform_data p720t_gpio_led_pdata __initdata = { - .leds = p720t_gpio_leds, - .num_leds = ARRAY_SIZE(p720t_gpio_leds), -}; - -static void __init p720t_init(void) -{ - int i; - - clps711x_devices_init(); - - for (i = 0; i < ARRAY_SIZE(mmgpios); i++) - p720t_mmgpio_init(mmgpios[i].addrbase, mmgpios[i].gpiobase); - - platform_device_register(&p720t_nand_pdev); -} - -static void __init p720t_init_late(void) -{ - WARN_ON(gpio_request_array(p720t_gpios, ARRAY_SIZE(p720t_gpios))); - - platform_device_register_data(NULL, "platform-lcd", 0, - &p720t_lcd_power_pdata, - sizeof(p720t_lcd_power_pdata)); - platform_device_register_data(NULL, "generic-bl", 0, - &p720t_lcd_backlight_pdata, - sizeof(p720t_lcd_backlight_pdata)); - platform_device_register_simple("video-clps711x", 0, NULL, 0); - platform_device_register_data(NULL, "leds-gpio", 0, - &p720t_gpio_led_pdata, - sizeof(p720t_gpio_led_pdata)); -} - -MACHINE_START(P720T, "ARM-Prospector720T") - /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .atag_offset = 0x100, - .fixup = fixup_p720t, - .map_io = clps711x_map_io, - .init_irq = clps711x_init_irq, - .init_time = clps711x_timer_init, - .init_machine = p720t_init, - .init_late = p720t_init_late, - .restart = clps711x_restart, -MACHINE_END diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c deleted file mode 100644 index 6466da8f3c11..000000000000 --- a/arch/arm/mach-clps711x/common.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/core.c - * - * Core support for the CLPS711x-based machines. - * - * Copyright (C) 2001,2011 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/init.h> -#include <linux/sizes.h> - -#include <asm/mach/map.h> -#include <asm/system_misc.h> - -#include <mach/hardware.h> - -#include "common.h" - -/* - * This maps the generic CLPS711x registers - */ -static struct map_desc clps711x_io_desc[] __initdata = { - { - .virtual = (unsigned long)CLPS711X_VIRT_BASE, - .pfn = __phys_to_pfn(CLPS711X_PHYS_BASE), - .length = 48 * SZ_1K, - .type = MT_DEVICE, - } -}; - -void __init clps711x_map_io(void) -{ - iotable_init(clps711x_io_desc, ARRAY_SIZE(clps711x_io_desc)); -} - -void __init clps711x_init_irq(void) -{ - clps711x_intc_init(CLPS711X_PHYS_BASE, SZ_16K); -} - -void __init clps711x_timer_init(void) -{ - clps711x_clk_init(CLPS711X_VIRT_BASE); - clps711x_clksrc_init(CLPS711X_VIRT_BASE + TC1D, - CLPS711X_VIRT_BASE + TC2D, IRQ_TC2OI); -} - -void clps711x_restart(enum reboot_mode mode, const char *cmd) -{ - soft_restart(0); -} diff --git a/arch/arm/mach-clps711x/common.h b/arch/arm/mach-clps711x/common.h deleted file mode 100644 index 370200b26333..000000000000 --- a/arch/arm/mach-clps711x/common.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/common.h - * - * Common bits. - */ - -#include <linux/reboot.h> - -#define CLPS711X_NR_GPIO (4 * 8 + 3) -#define CLPS711X_GPIO(prt, bit) ((prt) * 8 + (bit)) - -extern void clps711x_map_io(void); -extern void clps711x_init_irq(void); -extern void clps711x_timer_init(void); -extern void clps711x_restart(enum reboot_mode mode, const char *cmd); - -/* drivers/irqchip/irq-clps711x.c */ -void clps711x_intc_init(phys_addr_t, resource_size_t); -/* drivers/clk/clk-clps711x.c */ -void clps711x_clk_init(void __iomem *base); -/* drivers/clocksource/clps711x-timer.c */ -void clps711x_clksrc_init(void __iomem *tc1_base, void __iomem *tc2_base, - unsigned int irq); diff --git a/arch/arm/mach-clps711x/devices.c b/arch/arm/mach-clps711x/devices.c deleted file mode 100644 index 77a9617c216d..000000000000 --- a/arch/arm/mach-clps711x/devices.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * CLPS711X common devices definitions - * - * Author: Alexander Shiyan <shc_work@mail.ru>, 2013-2014 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/io.h> -#include <linux/of_fdt.h> -#include <linux/platform_device.h> -#include <linux/random.h> -#include <linux/sizes.h> -#include <linux/slab.h> -#include <linux/sys_soc.h> - -#include <asm/system_info.h> - -#include <mach/hardware.h> - -static const struct resource clps711x_cpuidle_res __initconst = - DEFINE_RES_MEM(CLPS711X_PHYS_BASE + HALT, SZ_128); - -static void __init clps711x_add_cpuidle(void) -{ - platform_device_register_simple("clps711x-cpuidle", PLATFORM_DEVID_NONE, - &clps711x_cpuidle_res, 1); -} - -static const phys_addr_t clps711x_gpios[][2] __initconst = { - { PADR, PADDR }, - { PBDR, PBDDR }, - { PCDR, PCDDR }, - { PDDR, PDDDR }, - { PEDR, PEDDR }, -}; - -static void __init clps711x_add_gpio(void) -{ - unsigned i; - struct resource gpio_res[2]; - - memset(gpio_res, 0, sizeof(gpio_res)); - - gpio_res[0].flags = IORESOURCE_MEM; - gpio_res[1].flags = IORESOURCE_MEM; - - for (i = 0; i < ARRAY_SIZE(clps711x_gpios); i++) { - gpio_res[0].start = CLPS711X_PHYS_BASE + clps711x_gpios[i][0]; - gpio_res[0].end = gpio_res[0].start; - gpio_res[1].start = CLPS711X_PHYS_BASE + clps711x_gpios[i][1]; - gpio_res[1].end = gpio_res[1].start; - - platform_device_register_simple("clps711x-gpio", i, - gpio_res, ARRAY_SIZE(gpio_res)); - } -} - -const struct resource clps711x_syscon_res[] __initconst = { - /* SYSCON1, SYSFLG1 */ - DEFINE_RES_MEM(CLPS711X_PHYS_BASE + SYSCON1, SZ_128), - /* SYSCON2, SYSFLG2 */ - DEFINE_RES_MEM(CLPS711X_PHYS_BASE + SYSCON2, SZ_128), - /* SYSCON3 */ - DEFINE_RES_MEM(CLPS711X_PHYS_BASE + SYSCON3, SZ_64), -}; - -static void __init clps711x_add_syscon(void) -{ - unsigned i; - - for (i = 0; i < ARRAY_SIZE(clps711x_syscon_res); i++) - platform_device_register_simple("syscon", i + 1, - &clps711x_syscon_res[i], 1); -} - -static const struct resource clps711x_uart1_res[] __initconst = { - DEFINE_RES_MEM(CLPS711X_PHYS_BASE + UARTDR1, SZ_128), - DEFINE_RES_IRQ(IRQ_UTXINT1), - DEFINE_RES_IRQ(IRQ_URXINT1), -}; - -static const struct resource clps711x_uart2_res[] __initconst = { - DEFINE_RES_MEM(CLPS711X_PHYS_BASE + UARTDR2, SZ_128), - DEFINE_RES_IRQ(IRQ_UTXINT2), - DEFINE_RES_IRQ(IRQ_URXINT2), -}; - -static void __init clps711x_add_uart(void) -{ - platform_device_register_simple("clps711x-uart", 0, clps711x_uart1_res, - ARRAY_SIZE(clps711x_uart1_res)); - platform_device_register_simple("clps711x-uart", 1, clps711x_uart2_res, - ARRAY_SIZE(clps711x_uart2_res)); -}; - -static void __init clps711x_soc_init(void) -{ - struct soc_device_attribute *soc_dev_attr; - struct soc_device *soc_dev; - void __iomem *base; - u32 id[5]; - - base = ioremap(CLPS711X_PHYS_BASE, SZ_32K); - if (!base) - return; - - id[0] = readl(base + UNIQID); - id[1] = readl(base + RANDID0); - id[2] = readl(base + RANDID1); - id[3] = readl(base + RANDID2); - id[4] = readl(base + RANDID3); - system_rev = SYSFLG1_VERID(readl(base + SYSFLG1)); - - add_device_randomness(id, sizeof(id)); - - system_serial_low = id[0]; - - soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); - if (!soc_dev_attr) - goto out_unmap; - - soc_dev_attr->machine = of_flat_dt_get_machine_name(); - soc_dev_attr->family = "Cirrus Logic CLPS711X"; - soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%u", system_rev); - soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "%08x", id[0]); - - soc_dev = soc_device_register(soc_dev_attr); - if (IS_ERR(soc_dev)) { - kfree(soc_dev_attr->revision); - kfree(soc_dev_attr->soc_id); - kfree(soc_dev_attr); - } - -out_unmap: - iounmap(base); -} - -void __init clps711x_devices_init(void) -{ - clps711x_add_cpuidle(); - clps711x_add_gpio(); - clps711x_add_syscon(); - clps711x_add_uart(); - clps711x_soc_init(); -} diff --git a/arch/arm/mach-clps711x/devices.h b/arch/arm/mach-clps711x/devices.h deleted file mode 100644 index a5efc1744b84..000000000000 --- a/arch/arm/mach-clps711x/devices.h +++ /dev/null @@ -1,12 +0,0 @@ -/* - * CLPS711X common devices definitions - * - * Copyright (C) 2013 Alexander Shiyan <shc_work@mail.ru> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -void clps711x_devices_init(void); diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig index eb14a0ff0093..5fd836be2701 100644 --- a/arch/arm/mach-cns3xxx/Kconfig +++ b/arch/arm/mach-cns3xxx/Kconfig @@ -2,7 +2,6 @@ menuconfig ARCH_CNS3XXX bool "Cavium Networks CNS3XXX family" depends on ARCH_MULTI_V6 select ARM_GIC - select PCI_DOMAINS if PCI help Support for Cavium Networks CNS3XXX platform. diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index b085855c1d0b..0bb63b8d21e7 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -127,8 +127,6 @@ config SOC_EXYNOS5440 select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE select HAVE_ARM_ARCH_TIMER select AUTO_ZRELADDR - select MIGHT_HAVE_PCI - select PCI_DOMAINS if PCI select PINCTRL_EXYNOS5440 select PM_OPP help diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index 3750575c73c5..06332f626565 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -255,6 +255,12 @@ static int __init exynos_pmu_irq_init(struct device_node *node, return -ENOMEM; } + /* + * Clear the OF_POPULATED flag set in of_irq_init so that + * later the Exynos PMU platform device won't be skipped. + */ + of_node_clear_flag(node, OF_POPULATED); + return 0; } diff --git a/arch/arm/mach-footbridge/include/mach/hardware.h b/arch/arm/mach-footbridge/include/mach/hardware.h index 02f6d7a706b1..20d5ad781fe2 100644 --- a/arch/arm/mach-footbridge/include/mach/hardware.h +++ b/arch/arm/mach-footbridge/include/mach/hardware.h @@ -59,7 +59,7 @@ #define XBUS_SWITCH_J17_11 ((*XBUS_SWITCH) & (1 << 5)) #define XBUS_SWITCH_J17_9 ((*XBUS_SWITCH) & (1 << 6)) -#define UNCACHEABLE_ADDR (ARMCSR_BASE + 0x108) +#define UNCACHEABLE_ADDR (ARMCSR_BASE + 0x108) /* CSR_ROMBASEMASK */ /* PIC irq control */ diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index ee9a318cab31..9155b639c9aa 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -64,13 +64,6 @@ config IMX_HAVE_IOMUX_V1 config ARCH_MXC_IOMUX_V3 bool -config SOC_IMX1 - bool - select CPU_ARM920T - select IMX_HAVE_IOMUX_V1 - select MXC_AVIC - select PINCTRL_IMX1 - config SOC_IMX21 bool select CPU_ARM926T @@ -88,7 +81,6 @@ config SOC_IMX31 bool select CPU_V6 select MXC_AVIC - select SMP_ON_UP if SMP config SOC_IMX35 bool @@ -96,35 +88,6 @@ config SOC_IMX35 select HAVE_EPIT select MXC_AVIC select PINCTRL_IMX35 - select SMP_ON_UP if SMP - -if ARCH_MULTI_V4T - -comment "MX1 platforms:" - -config MACH_SCB9328 - bool "Synertronixx scb9328" - select IMX_HAVE_PLATFORM_IMX_UART - select SOC_IMX1 - help - Say Y here if you are using a Synertronixx scb9328 board - -config MACH_APF9328 - bool "APF9328" - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select SOC_IMX1 - help - Say Yes here if you are using the Armadeus APF9328 development board - -config MACH_IMX1_DT - bool "Support i.MX1 platforms from device tree" - select SOC_IMX1 - help - Include support for Freescale i.MX1 based platforms - using the device tree for discovery. - -endif if ARCH_MULTI_V5 @@ -461,6 +424,18 @@ endif comment "Device tree only" +if ARCH_MULTI_V4T + +config SOC_IMX1 + bool "i.MX1 support" + select CPU_ARM920T + select MXC_AVIC + select PINCTRL_IMX1 + help + This enables support for Freescale i.MX1 processor + +endif + if ARCH_MULTI_V5 config SOC_IMX25 @@ -523,7 +498,6 @@ config SOC_IMX6Q select ARM_ERRATA_764369 if SMP select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD - select PCI_DOMAINS if PCI select PINCTRL_IMX6Q select SOC_IMX6 @@ -569,7 +543,6 @@ config SOC_LS1021A bool "Freescale LS1021A support" select ARM_GIC select HAVE_ARM_ARCH_TIMER - select PCI_DOMAINS if PCI select ZONE_DMA if ARM_LPAE help This enables support for Freescale LS1021A processor. @@ -585,7 +558,6 @@ config SOC_VF610 select ARM_GIC if ARCH_MULTI_V7 select PINCTRL_VF610 select PL310_ERRATA_769419 if CACHE_L2X0 - select SMP_ON_UP if SMP help This enables support for Freescale Vybrid VF610 processor. diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 574e5b8c6a65..cab128913e72 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -1,6 +1,5 @@ obj-y := cpu.o system.o irq-common.o -obj-$(CONFIG_SOC_IMX1) += mm-imx1.o obj-$(CONFIG_SOC_IMX21) += mm-imx21.o obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o pm-imx25.o @@ -36,11 +35,6 @@ obj-y += ssi-fiq.o obj-y += ssi-fiq-ksym.o endif -# i.MX1 based machines -obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o -obj-$(CONFIG_MACH_APF9328) += mach-apf9328.o -obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o - # i.MX21 based machines obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o @@ -94,6 +88,7 @@ obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o endif obj-$(CONFIG_SOC_IMX6) += pm-imx6.o +obj-$(CONFIG_SOC_IMX1) += mach-imx1.o obj-$(CONFIG_SOC_IMX50) += mach-imx50.o obj-$(CONFIG_SOC_IMX51) += mach-imx51.o obj-$(CONFIG_SOC_IMX53) += mach-imx53.o diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index fb644304446c..c4436d9c52ff 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -21,29 +21,24 @@ struct device_node; enum mxc_cpu_pwr_mode; struct of_device_id; -void mx1_map_io(void); void mx21_map_io(void); void mx27_map_io(void); void mx31_map_io(void); void mx35_map_io(void); -void imx1_init_early(void); void imx21_init_early(void); void imx27_init_early(void); void imx31_init_early(void); void imx35_init_early(void); void mxc_init_irq(void __iomem *); -void mx1_init_irq(void); void mx21_init_irq(void); void mx27_init_irq(void); void mx31_init_irq(void); void mx35_init_irq(void); -void imx1_soc_init(void); void imx21_soc_init(void); void imx27_soc_init(void); void imx31_soc_init(void); void imx35_soc_init(void); void epit_timer_init(void __iomem *base, int irq); -int mx1_clocks_init(unsigned long fref); int mx21_clocks_init(unsigned long lref, unsigned long fref); int mx27_clocks_init(unsigned long fref); int mx31_clocks_init(unsigned long fref); diff --git a/arch/arm/mach-imx/devices-imx1.h b/arch/arm/mach-imx/devices-imx1.h deleted file mode 100644 index f9b5afc6bcd1..000000000000 --- a/arch/arm/mach-imx/devices-imx1.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include "devices/devices-common.h" - -extern const struct imx_imx_fb_data imx1_imx_fb_data; -#define imx1_add_imx_fb(pdata) \ - imx_add_imx_fb(&imx1_imx_fb_data, pdata) - -extern const struct imx_imx_i2c_data imx1_imx_i2c_data; -#define imx1_add_imx_i2c(pdata) \ - imx_add_imx_i2c(&imx1_imx_i2c_data, pdata) - -extern const struct imx_imx_uart_3irq_data imx1_imx_uart_data[]; -#define imx1_add_imx_uart(id, pdata) \ - imx_add_imx_uart_3irq(&imx1_imx_uart_data[id], pdata) -#define imx1_add_imx_uart0(pdata) imx1_add_imx_uart(0, pdata) -#define imx1_add_imx_uart1(pdata) imx1_add_imx_uart(1, pdata) - -extern const struct imx_spi_imx_data imx1_cspi_data[]; -#define imx1_add_cspi(id, pdata) \ - imx_add_spi_imx(&imx1_cspi_data[id], pdata) - -#define imx1_add_spi_imx0(pdata) imx1_add_cspi(0, pdata) -#define imx1_add_spi_imx1(pdata) imx1_add_cspi(1, pdata) diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile index e5cf587bc1a0..aa6cee870795 100644 --- a/arch/arm/mach-imx/devices/Makefile +++ b/arch/arm/mach-imx/devices/Makefile @@ -20,7 +20,6 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_MMC) += platform-mxc-mmc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RNGA) += platform-mxc_rnga.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h index 09cebd8cef2b..6920e356f4e5 100644 --- a/arch/arm/mach-imx/devices/devices-common.h +++ b/arch/arm/mach-imx/devices/devices-common.h @@ -154,18 +154,6 @@ struct platform_device *__init imx_add_imx_ssi( const struct imx_ssi_platform_data *pdata); #include <linux/platform_data/serial-imx.h> -struct imx_imx_uart_3irq_data { - int id; - resource_size_t iobase; - resource_size_t iosize; - resource_size_t irqrx; - resource_size_t irqtx; - resource_size_t irqrts; -}; -struct platform_device *__init imx_add_imx_uart_3irq( - const struct imx_imx_uart_3irq_data *data, - const struct imxuart_platform_data *pdata); - struct imx_imx_uart_1irq_data { int id; resource_size_t iobase; diff --git a/arch/arm/mach-imx/devices/platform-imx-fb.c b/arch/arm/mach-imx/devices/platform-imx-fb.c index 7df6328306f9..aa00272252e0 100644 --- a/arch/arm/mach-imx/devices/platform-imx-fb.c +++ b/arch/arm/mach-imx/devices/platform-imx-fb.c @@ -19,11 +19,6 @@ .irq = soc ## _INT_LCDC, \ } -#ifdef CONFIG_SOC_IMX1 -const struct imx_imx_fb_data imx1_imx_fb_data __initconst = - imx_imx_fb_data_entry_single(MX1, "imx1-fb", SZ_4K); -#endif /* ifdef CONFIG_SOC_IMX1 */ - #ifdef CONFIG_SOC_IMX21 const struct imx_imx_fb_data imx21_imx_fb_data __initconst = imx_imx_fb_data_entry_single(MX21, "imx21-fb", SZ_4K); diff --git a/arch/arm/mach-imx/devices/platform-imx-i2c.c b/arch/arm/mach-imx/devices/platform-imx-i2c.c index ae9791522fc8..9822bedb5d09 100644 --- a/arch/arm/mach-imx/devices/platform-imx-i2c.c +++ b/arch/arm/mach-imx/devices/platform-imx-i2c.c @@ -21,11 +21,6 @@ #define imx_imx_i2c_data_entry(soc, _devid, _id, _hwid, _size) \ [_id] = imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size) -#ifdef CONFIG_SOC_IMX1 -const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst = - imx_imx_i2c_data_entry_single(MX1, "imx1-i2c", 0, , SZ_4K); -#endif /* ifdef CONFIG_SOC_IMX1 */ - #ifdef CONFIG_SOC_IMX21 const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst = imx_imx_i2c_data_entry_single(MX21, "imx21-i2c", 0, , SZ_4K); diff --git a/arch/arm/mach-imx/devices/platform-imx-uart.c b/arch/arm/mach-imx/devices/platform-imx-uart.c index 6962cff4a950..e3c89e9caf93 100644 --- a/arch/arm/mach-imx/devices/platform-imx-uart.c +++ b/arch/arm/mach-imx/devices/platform-imx-uart.c @@ -27,15 +27,6 @@ .irq = soc ## _INT_UART ## _hwid, \ } -#ifdef CONFIG_SOC_IMX1 -const struct imx_imx_uart_3irq_data imx1_imx_uart_data[] __initconst = { -#define imx1_imx_uart_data_entry(_id, _hwid) \ - imx_imx_uart_3irq_data_entry(MX1, _id, _hwid, 0xd0) - imx1_imx_uart_data_entry(0, 1), - imx1_imx_uart_data_entry(1, 2), -}; -#endif /* ifdef CONFIG_SOC_IMX1 */ - #ifdef CONFIG_SOC_IMX21 const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst = { #define imx21_imx_uart_data_entry(_id, _hwid) \ @@ -82,34 +73,6 @@ const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = { }; #endif /* ifdef CONFIG_SOC_IMX35 */ -struct platform_device *__init imx_add_imx_uart_3irq( - const struct imx_imx_uart_3irq_data *data, - const struct imxuart_platform_data *pdata) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + data->iosize - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irqrx, - .end = data->irqrx, - .flags = IORESOURCE_IRQ, - }, { - .start = data->irqtx, - .end = data->irqtx, - .flags = IORESOURCE_IRQ, - }, { - .start = data->irqrts, - .end = data->irqrx, - .flags = IORESOURCE_IRQ, - }, - }; - - return imx_add_platform_device("imx1-uart", data->id, res, - ARRAY_SIZE(res), pdata, sizeof(*pdata)); -} - struct platform_device *__init imx_add_imx_uart_1irq( const struct imx_imx_uart_1irq_data *data, const struct imxuart_platform_data *pdata) diff --git a/arch/arm/mach-imx/devices/platform-spi_imx.c b/arch/arm/mach-imx/devices/platform-spi_imx.c index 5e9707b47f92..d93c446c9c02 100644 --- a/arch/arm/mach-imx/devices/platform-spi_imx.c +++ b/arch/arm/mach-imx/devices/platform-spi_imx.c @@ -21,15 +21,6 @@ #define imx_spi_imx_data_entry(soc, type, devid, id, hwid, size) \ [id] = imx_spi_imx_data_entry_single(soc, type, devid, id, hwid, size) -#ifdef CONFIG_SOC_IMX1 -const struct imx_spi_imx_data imx1_cspi_data[] __initconst = { -#define imx1_cspi_data_entry(_id, _hwid) \ - imx_spi_imx_data_entry(MX1, CSPI, "imx1-cspi", _id, _hwid, SZ_4K) - imx1_cspi_data_entry(0, 1), - imx1_cspi_data_entry(1, 2), -}; -#endif - #ifdef CONFIG_SOC_IMX21 const struct imx_spi_imx_data imx21_cspi_data[] __initconst = { #define imx21_cspi_data_entry(_id, _hwid) \ diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h index d737f95ebb07..90e10cbd8fd1 100644 --- a/arch/arm/mach-imx/hardware.h +++ b/arch/arm/mach-imx/hardware.h @@ -112,7 +112,6 @@ #include "mx2x.h" #include "mx21.h" #include "mx27.h" -#include "mx1.h" #define imx_map_entry(soc, name, _type) { \ .virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \ @@ -121,7 +120,7 @@ .type = _type, \ } -/* There's a off-by-one betweem the gpio bank number and the gpiochip */ +/* There's an off-by-one between the gpio bank number and the gpiochip */ /* range e.g. GPIO_1_5 is gpio 5 under linux */ #define IMX_GPIO_NR(bank, nr) (((bank) - 1) * 32 + (nr)) diff --git a/arch/arm/mach-imx/iomux-mx1.h b/arch/arm/mach-imx/iomux-mx1.h deleted file mode 100644 index 95f4681d85d7..000000000000 --- a/arch/arm/mach-imx/iomux-mx1.h +++ /dev/null @@ -1,155 +0,0 @@ -/* - * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ -#ifndef __MACH_IOMUX_MX1_H__ -#define __MACH_IOMUX_MX1_H__ - -#include "iomux-v1.h" - -#define PA0_AIN_SPI2_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0) -#define PA0_AF_ETMTRACESYNC (GPIO_PORTA | GPIO_AF | 0) -#define PA1_AOUT_SPI2_RXD (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 1) -#define PA1_PF_TIN (GPIO_PORTA | GPIO_PF | 1) -#define PA2_PF_PWM0 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 2) -#define PA3_PF_CSI_MCLK (GPIO_PORTA | GPIO_PF | 3) -#define PA4_PF_CSI_D0 (GPIO_PORTA | GPIO_PF | 4) -#define PA5_PF_CSI_D1 (GPIO_PORTA | GPIO_PF | 5) -#define PA6_PF_CSI_D2 (GPIO_PORTA | GPIO_PF | 6) -#define PA7_PF_CSI_D3 (GPIO_PORTA | GPIO_PF | 7) -#define PA8_PF_CSI_D4 (GPIO_PORTA | GPIO_PF | 8) -#define PA9_PF_CSI_D5 (GPIO_PORTA | GPIO_PF | 9) -#define PA10_PF_CSI_D6 (GPIO_PORTA | GPIO_PF | 10) -#define PA11_PF_CSI_D7 (GPIO_PORTA | GPIO_PF | 11) -#define PA12_PF_CSI_VSYNC (GPIO_PORTA | GPIO_PF | 12) -#define PA13_PF_CSI_HSYNC (GPIO_PORTA | GPIO_PF | 13) -#define PA14_PF_CSI_PIXCLK (GPIO_PORTA | GPIO_PF | 14) -#define PA15_PF_I2C_SDA (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15) -#define PA16_PF_I2C_SCL (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16) -#define PA17_AF_ETMTRACEPKT4 (GPIO_PORTA | GPIO_AF | 17) -#define PA17_AIN_SPI2_SS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17) -#define PA18_AF_ETMTRACEPKT5 (GPIO_PORTA | GPIO_AF | 18) -#define PA19_AF_ETMTRACEPKT6 (GPIO_PORTA | GPIO_AF | 19) -#define PA20_AF_ETMTRACEPKT7 (GPIO_PORTA | GPIO_AF | 20) -#define PA21_PF_A0 (GPIO_PORTA | GPIO_PF | 21) -#define PA22_PF_CS4 (GPIO_PORTA | GPIO_PF | 22) -#define PA23_PF_CS5 (GPIO_PORTA | GPIO_PF | 23) -#define PA24_PF_A16 (GPIO_PORTA | GPIO_PF | 24) -#define PA24_AF_ETMTRACEPKT0 (GPIO_PORTA | GPIO_AF | 24) -#define PA25_PF_A17 (GPIO_PORTA | GPIO_PF | 25) -#define PA25_AF_ETMTRACEPKT1 (GPIO_PORTA | GPIO_AF | 25) -#define PA26_PF_A18 (GPIO_PORTA | GPIO_PF | 26) -#define PA26_AF_ETMTRACEPKT2 (GPIO_PORTA | GPIO_AF | 26) -#define PA27_PF_A19 (GPIO_PORTA | GPIO_PF | 27) -#define PA27_AF_ETMTRACEPKT3 (GPIO_PORTA | GPIO_AF | 27) -#define PA28_PF_A20 (GPIO_PORTA | GPIO_PF | 28) -#define PA28_AF_ETMPIPESTAT0 (GPIO_PORTA | GPIO_AF | 28) -#define PA29_PF_A21 (GPIO_PORTA | GPIO_PF | 29) -#define PA29_AF_ETMPIPESTAT1 (GPIO_PORTA | GPIO_AF | 29) -#define PA30_PF_A22 (GPIO_PORTA | GPIO_PF | 30) -#define PA30_AF_ETMPIPESTAT2 (GPIO_PORTA | GPIO_AF | 30) -#define PA31_PF_A23 (GPIO_PORTA | GPIO_PF | 31) -#define PA31_AF_ETMTRACECLK (GPIO_PORTA | GPIO_AF | 31) -#define PB8_PF_SD_DAT0 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8) -#define PB8_AF_MS_PIO (GPIO_PORTB | GPIO_AF | 8) -#define PB9_PF_SD_DAT1 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9) -#define PB9_AF_MS_PI1 (GPIO_PORTB | GPIO_AF | 9) -#define PB10_PF_SD_DAT2 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10) -#define PB10_AF_MS_SCLKI (GPIO_PORTB | GPIO_AF | 10) -#define PB11_PF_SD_DAT3 (GPIO_PORTB | GPIO_PF | 11) -#define PB11_AF_MS_SDIO (GPIO_PORTB | GPIO_AF | 11) -#define PB12_PF_SD_CLK (GPIO_PORTB | GPIO_PF | 12) -#define PB12_AF_MS_SCLK0 (GPIO_PORTB | GPIO_AF | 12) -#define PB13_PF_SD_CMD (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13) -#define PB13_AF_MS_BS (GPIO_PORTB | GPIO_AF | 13) -#define PB14_AF_SSI_RXFS (GPIO_PORTB | GPIO_AF | 14) -#define PB15_AF_SSI_RXCLK (GPIO_PORTB | GPIO_AF | 15) -#define PB16_AF_SSI_RXDAT (GPIO_PORTB | GPIO_AF | GPIO_IN | 16) -#define PB17_AF_SSI_TXDAT (GPIO_PORTB | GPIO_AF | GPIO_OUT | 17) -#define PB18_AF_SSI_TXFS (GPIO_PORTB | GPIO_AF | 18) -#define PB19_AF_SSI_TXCLK (GPIO_PORTB | GPIO_AF | 19) -#define PB20_PF_USBD_AFE (GPIO_PORTB | GPIO_PF | 20) -#define PB21_PF_USBD_OE (GPIO_PORTB | GPIO_PF | 21) -#define PB22_PF_USBD_RCV (GPIO_PORTB | GPIO_PF | 22) -#define PB23_PF_USBD_SUSPND (GPIO_PORTB | GPIO_PF | 23) -#define PB24_PF_USBD_VP (GPIO_PORTB | GPIO_PF | 24) -#define PB25_PF_USBD_VM (GPIO_PORTB | GPIO_PF | 25) -#define PB26_PF_USBD_VPO (GPIO_PORTB | GPIO_PF | 26) -#define PB27_PF_USBD_VMO (GPIO_PORTB | GPIO_PF | 27) -#define PB28_PF_UART2_CTS (GPIO_PORTB | GPIO_PF | GPIO_OUT | 28) -#define PB29_PF_UART2_RTS (GPIO_PORTB | GPIO_PF | GPIO_IN | 29) -#define PB30_PF_UART2_TXD (GPIO_PORTB | GPIO_PF | GPIO_OUT | 30) -#define PB31_PF_UART2_RXD (GPIO_PORTB | GPIO_PF | GPIO_IN | 31) -#define PC3_PF_SSI_RXFS (GPIO_PORTC | GPIO_PF | 3) -#define PC4_PF_SSI_RXCLK (GPIO_PORTC | GPIO_PF | 4) -#define PC5_PF_SSI_RXDAT (GPIO_PORTC | GPIO_PF | GPIO_IN | 5) -#define PC6_PF_SSI_TXDAT (GPIO_PORTC | GPIO_PF | GPIO_OUT | 6) -#define PC7_PF_SSI_TXFS (GPIO_PORTC | GPIO_PF | 7) -#define PC8_PF_SSI_TXCLK (GPIO_PORTC | GPIO_PF | 8) -#define PC9_PF_UART1_CTS (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9) -#define PC10_PF_UART1_RTS (GPIO_PORTC | GPIO_PF | GPIO_IN | 10) -#define PC11_PF_UART1_TXD (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11) -#define PC12_PF_UART1_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 12) -#define PC13_PF_SPI1_SPI_RDY (GPIO_PORTC | GPIO_PF | 13) -#define PC14_PF_SPI1_SCLK (GPIO_PORTC | GPIO_PF | 14) -#define PC15_PF_SPI1_SS (GPIO_PORTC | GPIO_PF | 15) -#define PC16_PF_SPI1_MISO (GPIO_PORTC | GPIO_PF | 16) -#define PC17_PF_SPI1_MOSI (GPIO_PORTC | GPIO_PF | 17) -#define PC24_BIN_UART3_RI (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 24) -#define PC25_BIN_UART3_DSR (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 25) -#define PC26_AOUT_UART3_DTR (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 26) -#define PC27_BIN_UART3_DCD (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 27) -#define PC28_BIN_UART3_CTS (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 28) -#define PC29_AOUT_UART3_RTS (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 29) -#define PC30_BIN_UART3_TX (GPIO_PORTC | GPIO_BIN | 30) -#define PC31_AOUT_UART3_RX (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 31) -#define PD6_PF_LSCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 6) -#define PD7_PF_REV (GPIO_PORTD | GPIO_PF | 7) -#define PD7_AF_UART2_DTR (GPIO_PORTD | GPIO_AF | GPIO_IN | 7) -#define PD7_AIN_SPI2_SCLK (GPIO_PORTD | GPIO_AIN | 7) -#define PD8_PF_CLS (GPIO_PORTD | GPIO_PF | 8) -#define PD8_AF_UART2_DCD (GPIO_PORTD | GPIO_AF | GPIO_OUT | 8) -#define PD8_AIN_SPI2_SS (GPIO_PORTD | GPIO_AIN | 8) -#define PD9_PF_PS (GPIO_PORTD | GPIO_PF | 9) -#define PD9_AF_UART2_RI (GPIO_PORTD | GPIO_AF | GPIO_OUT | 9) -#define PD9_AOUT_SPI2_RXD (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 9) -#define PD10_PF_SPL_SPR (GPIO_PORTD | GPIO_PF | GPIO_OUT | 10) -#define PD10_AF_UART2_DSR (GPIO_PORTD | GPIO_AF | GPIO_OUT | 10) -#define PD10_AIN_SPI2_TXD (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 10) -#define PD11_PF_CONTRAST (GPIO_PORTD | GPIO_PF | GPIO_OUT | 11) -#define PD12_PF_ACD_OE (GPIO_PORTD | GPIO_PF | GPIO_OUT | 12) -#define PD13_PF_LP_HSYNC (GPIO_PORTD | GPIO_PF | GPIO_OUT | 13) -#define PD14_PF_FLM_VSYNC (GPIO_PORTD | GPIO_PF | GPIO_OUT | 14) -#define PD15_PF_LD0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 15) -#define PD16_PF_LD1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 16) -#define PD17_PF_LD2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17) -#define PD18_PF_LD3 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18) -#define PD19_PF_LD4 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 19) -#define PD20_PF_LD5 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 20) -#define PD21_PF_LD6 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 21) -#define PD22_PF_LD7 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 22) -#define PD23_PF_LD8 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 23) -#define PD24_PF_LD9 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 24) -#define PD25_PF_LD10 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25) -#define PD26_PF_LD11 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26) -#define PD27_PF_LD12 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27) -#define PD28_PF_LD13 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28) -#define PD29_PF_LD14 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29) -#define PD30_PF_LD15 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 30) -#define PD31_PF_TMR2OUT (GPIO_PORTD | GPIO_PF | 31) -#define PD31_BIN_SPI2_TXD (GPIO_PORTD | GPIO_BIN | 31) - -#endif /* ifndef __MACH_IOMUX_MX1_H__ */ diff --git a/arch/arm/mach-imx/iomux-mx3.h b/arch/arm/mach-imx/iomux-mx3.h index 2e4a0ddca76c..368667b32760 100644 --- a/arch/arm/mach-imx/iomux-mx3.h +++ b/arch/arm/mach-imx/iomux-mx3.h @@ -598,10 +598,7 @@ enum iomux_pins { #define MX31_PIN_CONTRAST__CONTRAST IOMUX_MODE(MX31_PIN_CONTRAST, IOMUX_CONFIG_FUNC) #define MX31_PIN_D3_SPL__D3_SPL IOMUX_MODE(MX31_PIN_D3_SPL, IOMUX_CONFIG_FUNC) #define MX31_PIN_D3_CLS__D3_CLS IOMUX_MODE(MX31_PIN_D3_CLS, IOMUX_CONFIG_FUNC) -#define MX31_PIN_LCS0__GPI03_23 IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO) #define MX31_PIN_GPIO1_1__GPIO IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO) -#define MX31_PIN_I2C_CLK__SCL IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC) -#define MX31_PIN_I2C_DAT__SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC) #define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2) #define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2) #define MX31_PIN_CSPI2_SS2__I2C3_SDA IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_ALT1) @@ -665,37 +662,6 @@ enum iomux_pins { #define MX31_PIN_USB_OC__GPIO1_30 IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO) #define MX31_PIN_I2C_DAT__I2C1_SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC) #define MX31_PIN_I2C_CLK__I2C1_SCL IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC) -#define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2) -#define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2) -#define MX31_PIN_ATA_CS0__GPIO3_26 IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO) -#define MX31_PIN_ATA_CS1__GPIO3_27 IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO) -#define MX31_PIN_PC_PWRON__SD2_DATA3 IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1) -#define MX31_PIN_PC_VS1__SD2_DATA2 IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1) -#define MX31_PIN_PC_READY__SD2_DATA1 IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1) -#define MX31_PIN_PC_WAIT_B__SD2_DATA0 IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1) -#define MX31_PIN_PC_CD2_B__SD2_CLK IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1) -#define MX31_PIN_PC_CD1_B__SD2_CMD IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1) -#define MX31_PIN_ATA_DIOR__GPIO3_28 IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO) -#define MX31_PIN_ATA_DIOW__GPIO3_29 IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO) -#define MX31_PIN_CSI_D4__CSI_D4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D5__CSI_D5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D6__CSI_D6 IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D7__CSI_D7 IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D8__CSI_D8 IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D9__CSI_D9 IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D10__CSI_D10 IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D11__CSI_D11 IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D12__CSI_D12 IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D13__CSI_D13 IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D14__CSI_D14 IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D15__CSI_D15 IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_HSYNC__CSI_HSYNC IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_MCLK__CSI_MCLK IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_VSYNC__CSI_VSYNC IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC) -#define MX31_PIN_GPIO3_0__GPIO3_0 IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO) -#define MX31_PIN_GPIO3_1__GPIO3_1 IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO) -#define MX31_PIN_TXD2__GPIO1_28 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO) #define MX31_PIN_GPIO1_0__GPIO1_0 IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO) #define MX31_PIN_SVEN0__GPIO2_0 IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO) #define MX31_PIN_STX0__GPIO2_1 IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO) diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c deleted file mode 100644 index ebbb5ab63529..000000000000 --- a/arch/arm/mach-imx/mach-apf9328.c +++ /dev/null @@ -1,148 +0,0 @@ -/* - * linux/arch/arm/mach-imx/mach-apf9328.c - * - * Copyright (c) 2005-2011 ARMadeus systems <support@armadeus.com> - * - * This work is based on mach-scb9328.c which is: - * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de> - * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/dm9000.h> -#include <linux/gpio.h> -#include <linux/i2c.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#include "common.h" -#include "devices-imx1.h" -#include "hardware.h" -#include "iomux-mx1.h" - -static const int apf9328_pins[] __initconst = { - /* UART1 */ - PC9_PF_UART1_CTS, - PC10_PF_UART1_RTS, - PC11_PF_UART1_TXD, - PC12_PF_UART1_RXD, - /* UART2 */ - PB28_PF_UART2_CTS, - PB29_PF_UART2_RTS, - PB30_PF_UART2_TXD, - PB31_PF_UART2_RXD, - /* I2C */ - PA15_PF_I2C_SDA, - PA16_PF_I2C_SCL, -}; - -/* - * The APF9328 can have up to 32MB NOR Flash - */ -static struct resource flash_resource = { - .start = MX1_CS0_PHYS, - .end = MX1_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct physmap_flash_data apf9328_flash_data = { - .width = 2, -}; - -static struct platform_device apf9328_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &apf9328_flash_data, - }, - .resource = &flash_resource, - .num_resources = 1, -}; - -/* - * APF9328 has a DM9000 Ethernet controller - */ -static struct dm9000_plat_data dm9000_setup = { - .flags = DM9000_PLATF_16BITONLY -}; - -static struct resource dm9000_resources[] = { - { - .start = MX1_CS4_PHYS + 0x00C00000, - .end = MX1_CS4_PHYS + 0x00C00001, - .flags = IORESOURCE_MEM, - }, { - .start = MX1_CS4_PHYS + 0x00C00002, - .end = MX1_CS4_PHYS + 0x00C00003, - .flags = IORESOURCE_MEM, - }, { - /* irq number is run-time assigned */ - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct platform_device dm9000x_device = { - .name = "dm9000", - .id = 0, - .num_resources = ARRAY_SIZE(dm9000_resources), - .resource = dm9000_resources, - .dev = { - .platform_data = &dm9000_setup, - } -}; - -static const struct imxuart_platform_data uart1_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const struct imxi2c_platform_data apf9328_i2c_data __initconst = { - .bitrate = 100000, -}; - -static struct platform_device *devices[] __initdata = { - &apf9328_flash_device, - &dm9000x_device, -}; - -static void __init apf9328_init(void) -{ - imx1_soc_init(); - - mxc_gpio_setup_multiple_pins(apf9328_pins, - ARRAY_SIZE(apf9328_pins), - "APF9328"); - - imx1_add_imx_uart0(NULL); - imx1_add_imx_uart1(&uart1_pdata); - - imx1_add_imx_i2c(&apf9328_i2c_data); - - dm9000_resources[2].start = gpio_to_irq(IMX_GPIO_NR(2, 14)); - dm9000_resources[2].end = gpio_to_irq(IMX_GPIO_NR(2, 14)); - platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -static void __init apf9328_timer_init(void) -{ - mx1_clocks_init(32768); -} - -MACHINE_START(APF9328, "Armadeus APF9328") - /* Maintainer: Gwenhael Goavec-Merou, ARMadeus Systems */ - .map_io = mx1_map_io, - .init_early = imx1_init_early, - .init_irq = mx1_init_irq, - .init_time = apf9328_timer_init, - .init_machine = apf9328_init, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/imx1-dt.c b/arch/arm/mach-imx/mach-imx1.c index 6f915b0961c4..de5ab8d88549 100644 --- a/arch/arm/mach-imx/imx1-dt.c +++ b/arch/arm/mach-imx/mach-imx1.c @@ -9,8 +9,27 @@ #include <linux/of_platform.h> #include <asm/mach/arch.h> +#include <asm/mach/map.h> #include "common.h" +#include "hardware.h" + +#define MX1_AVIC_ADDR 0x00223000 + +static void __init imx1_init_early(void) +{ + mxc_set_cpu_type(MXC_CPU_MX1); +} + +static void __init imx1_init_irq(void) +{ + void __iomem *avic_addr; + + avic_addr = ioremap(MX1_AVIC_ADDR, SZ_4K); + WARN_ON(!avic_addr); + + mxc_init_irq(avic_addr); +} static const char * const imx1_dt_board_compat[] __initconst = { "fsl,imx1", @@ -18,9 +37,9 @@ static const char * const imx1_dt_board_compat[] __initconst = { }; DT_MACHINE_START(IMX1_DT, "Freescale i.MX1 (Device Tree Support)") - .map_io = mx1_map_io, + .map_io = debug_ll_io_init, .init_early = imx1_init_early, - .init_irq = mx1_init_irq, + .init_irq = imx1_init_irq, .dt_compat = imx1_dt_board_compat, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c index 08308a127ff7..58a2b88233e6 100644 --- a/arch/arm/mach-imx/mach-imx6ul.c +++ b/arch/arm/mach-imx/mach-imx6ul.c @@ -65,6 +65,7 @@ static void __init imx6ul_init_machine(void) if (parent == NULL) pr_warn("failed to initialize soc device\n"); + of_platform_default_populate(NULL, NULL, parent); imx6ul_enet_init(); imx_anatop_init(); imx6ul_pm_init(); diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index 8288acfe7221..ab847e2c822a 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -63,7 +63,7 @@ */ #define KZM_ARM11_16550 (MX31_CS4_BASE_ADDR + 0x1050) -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_8250) /* * KZM-ARM11-01 has an external UART on FPGA */ @@ -141,7 +141,7 @@ static inline int kzm_init_ext_uart(void) /* * SMSC LAN9118 */ -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) static struct smsc911x_platform_config kzm_smsc9118_config = { .phy_interface = PHY_INTERFACE_MODE_MII, .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, @@ -201,7 +201,7 @@ static inline int kzm_init_smsc9118(void) } #endif -#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_IMX) static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index d071ced7425d..9f0f55b0422c 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -149,7 +149,7 @@ static unsigned int pcm037_pins[] = { MX31_PIN_CONTRAST__CONTRAST, MX31_PIN_D3_SPL__D3_SPL, MX31_PIN_D3_CLS__D3_CLS, - MX31_PIN_LCS0__GPI03_23, + MX31_PIN_LCS0__GPIO3_23, /* CSI */ IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO), MX31_PIN_CSI_D6__CSI_D6, diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c deleted file mode 100644 index 1f6bc3f7ae14..000000000000 --- a/arch/arm/mach-imx/mach-scb9328.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * linux/arch/arm/mach-mx1/mach-scb9328.c - * - * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de> - * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/interrupt.h> -#include <linux/dm9000.h> -#include <linux/gpio.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#include "common.h" -#include "devices-imx1.h" -#include "hardware.h" -#include "iomux-mx1.h" - -/* - * This scb9328 has a 32MiB flash - */ -static struct resource flash_resource = { - .start = MX1_CS0_PHYS, - .end = MX1_CS0_PHYS + (32 * 1024 * 1024) - 1, - .flags = IORESOURCE_MEM, -}; - -static struct physmap_flash_data scb_flash_data = { - .width = 2, -}; - -static struct platform_device scb_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &scb_flash_data, - }, - .resource = &flash_resource, - .num_resources = 1, -}; - -/* - * scb9328 has a DM9000 network controller - * connected to CS5, with 16 bit data path - * and interrupt connected to GPIO 3 - */ - -/* - * internal datapath is fixed 16 bit - */ -static struct dm9000_plat_data dm9000_platdata = { - .flags = DM9000_PLATF_16BITONLY, -}; - -/* - * the DM9000 drivers wants two defined address spaces - * to gain access to address latch registers and the data path. - */ -static struct resource dm9000x_resources[] = { - { - .name = "address area", - .start = MX1_CS5_PHYS, - .end = MX1_CS5_PHYS + 1, - .flags = IORESOURCE_MEM, /* address access */ - }, { - .name = "data area", - .start = MX1_CS5_PHYS + 4, - .end = MX1_CS5_PHYS + 5, - .flags = IORESOURCE_MEM, /* data access */ - }, { - /* irq number is run-time assigned */ - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct platform_device dm9000x_device = { - .name = "dm9000", - .id = 0, - .num_resources = ARRAY_SIZE(dm9000x_resources), - .resource = dm9000x_resources, - .dev = { - .platform_data = &dm9000_platdata, - } -}; - -static const int mxc_uart1_pins[] = { - PC9_PF_UART1_CTS, - PC10_PF_UART1_RTS, - PC11_PF_UART1_TXD, - PC12_PF_UART1_RXD, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static struct platform_device *devices[] __initdata = { - &scb_flash_device, - &dm9000x_device, -}; - -/* - * scb9328_init - Init the CPU card itself - */ -static void __init scb9328_init(void) -{ - imx1_soc_init(); - - mxc_gpio_setup_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins), "UART1"); - - imx1_add_imx_uart0(&uart_pdata); - - printk(KERN_INFO"Scb9328: Adding devices\n"); - dm9000x_resources[2].start = gpio_to_irq(IMX_GPIO_NR(3, 3)); - dm9000x_resources[2].end = gpio_to_irq(IMX_GPIO_NR(3, 3)); - platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -static void __init scb9328_timer_init(void) -{ - mx1_clocks_init(32000); -} - -MACHINE_START(SCB9328, "Synertronixx scb9328") - /* Sascha Hauer */ - .atag_offset = 100, - .map_io = mx1_map_io, - .init_early = imx1_init_early, - .init_irq = mx1_init_irq, - .init_time = scb9328_timer_init, - .init_machine = scb9328_init, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c deleted file mode 100644 index 9a42f19be81e..000000000000 --- a/arch/arm/mach-imx/mm-imx1.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * author: Sascha Hauer - * Created: april 20th, 2004 - * Copyright: Synertronixx GmbH - * - * Common code for i.MX1 machines - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/pinctrl/machine.h> - -#include <asm/mach/map.h> - -#include "common.h" -#include "devices/devices-common.h" -#include "hardware.h" -#include "iomux-v1.h" - -static struct map_desc imx_io_desc[] __initdata = { - imx_map_entry(MX1, IO, MT_DEVICE), -}; - -void __init mx1_map_io(void) -{ - iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc)); -} - -void __init imx1_init_early(void) -{ - mxc_set_cpu_type(MXC_CPU_MX1); - imx_iomuxv1_init(MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR), - MX1_NUM_GPIO_PORT); -} - -void __init mx1_init_irq(void) -{ - mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR)); -} - -void __init imx1_soc_init(void) -{ - imx1_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR)); - mxc_device_init(); - - mxc_register_gpio("imx1-gpio", 0, MX1_GPIO1_BASE_ADDR, SZ_256, - MX1_GPIO_INT_PORTA, 0); - mxc_register_gpio("imx1-gpio", 1, MX1_GPIO2_BASE_ADDR, SZ_256, - MX1_GPIO_INT_PORTB, 0); - mxc_register_gpio("imx1-gpio", 2, MX1_GPIO3_BASE_ADDR, SZ_256, - MX1_GPIO_INT_PORTC, 0); - mxc_register_gpio("imx1-gpio", 3, MX1_GPIO4_BASE_ADDR, SZ_256, - MX1_GPIO_INT_PORTD, 0); - imx_add_imx_dma("imx1-dma", MX1_DMA_BASE_ADDR, - MX1_DMA_INT, MX1_DMA_ERR); - pinctrl_provide_dummies(); -} diff --git a/arch/arm/mach-imx/mx1.h b/arch/arm/mach-imx/mx1.h deleted file mode 100644 index 45bd31cc34d6..000000000000 --- a/arch/arm/mach-imx/mx1.h +++ /dev/null @@ -1,172 +0,0 @@ -/* - * Copyright (C) 1997,1998 Russell King - * Copyright (C) 1999 ARM Limited - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_MX1_H__ -#define __MACH_MX1_H__ - -/* - * Memory map - */ -#define MX1_IO_BASE_ADDR 0x00200000 -#define MX1_IO_SIZE SZ_1M - -#define MX1_CS0_PHYS 0x10000000 -#define MX1_CS0_SIZE 0x02000000 - -#define MX1_CS1_PHYS 0x12000000 -#define MX1_CS1_SIZE 0x01000000 - -#define MX1_CS2_PHYS 0x13000000 -#define MX1_CS2_SIZE 0x01000000 - -#define MX1_CS3_PHYS 0x14000000 -#define MX1_CS3_SIZE 0x01000000 - -#define MX1_CS4_PHYS 0x15000000 -#define MX1_CS4_SIZE 0x01000000 - -#define MX1_CS5_PHYS 0x16000000 -#define MX1_CS5_SIZE 0x01000000 - -/* - * Register BASEs, based on OFFSETs - */ -#define MX1_AIPI1_BASE_ADDR (0x00000 + MX1_IO_BASE_ADDR) -#define MX1_WDT_BASE_ADDR (0x01000 + MX1_IO_BASE_ADDR) -#define MX1_TIM1_BASE_ADDR (0x02000 + MX1_IO_BASE_ADDR) -#define MX1_TIM2_BASE_ADDR (0x03000 + MX1_IO_BASE_ADDR) -#define MX1_RTC_BASE_ADDR (0x04000 + MX1_IO_BASE_ADDR) -#define MX1_LCDC_BASE_ADDR (0x05000 + MX1_IO_BASE_ADDR) -#define MX1_UART1_BASE_ADDR (0x06000 + MX1_IO_BASE_ADDR) -#define MX1_UART2_BASE_ADDR (0x07000 + MX1_IO_BASE_ADDR) -#define MX1_PWM_BASE_ADDR (0x08000 + MX1_IO_BASE_ADDR) -#define MX1_DMA_BASE_ADDR (0x09000 + MX1_IO_BASE_ADDR) -#define MX1_AIPI2_BASE_ADDR (0x10000 + MX1_IO_BASE_ADDR) -#define MX1_SIM_BASE_ADDR (0x11000 + MX1_IO_BASE_ADDR) -#define MX1_USBD_BASE_ADDR (0x12000 + MX1_IO_BASE_ADDR) -#define MX1_CSPI1_BASE_ADDR (0x13000 + MX1_IO_BASE_ADDR) -#define MX1_MMC_BASE_ADDR (0x14000 + MX1_IO_BASE_ADDR) -#define MX1_ASP_BASE_ADDR (0x15000 + MX1_IO_BASE_ADDR) -#define MX1_BTA_BASE_ADDR (0x16000 + MX1_IO_BASE_ADDR) -#define MX1_I2C_BASE_ADDR (0x17000 + MX1_IO_BASE_ADDR) -#define MX1_SSI_BASE_ADDR (0x18000 + MX1_IO_BASE_ADDR) -#define MX1_CSPI2_BASE_ADDR (0x19000 + MX1_IO_BASE_ADDR) -#define MX1_MSHC_BASE_ADDR (0x1A000 + MX1_IO_BASE_ADDR) -#define MX1_CCM_BASE_ADDR (0x1B000 + MX1_IO_BASE_ADDR) -#define MX1_SCM_BASE_ADDR (0x1B804 + MX1_IO_BASE_ADDR) -#define MX1_GPIO_BASE_ADDR (0x1C000 + MX1_IO_BASE_ADDR) -#define MX1_GPIO1_BASE_ADDR (0x1C000 + MX1_IO_BASE_ADDR) -#define MX1_GPIO2_BASE_ADDR (0x1C100 + MX1_IO_BASE_ADDR) -#define MX1_GPIO3_BASE_ADDR (0x1C200 + MX1_IO_BASE_ADDR) -#define MX1_GPIO4_BASE_ADDR (0x1C300 + MX1_IO_BASE_ADDR) -#define MX1_EIM_BASE_ADDR (0x20000 + MX1_IO_BASE_ADDR) -#define MX1_SDRAMC_BASE_ADDR (0x21000 + MX1_IO_BASE_ADDR) -#define MX1_MMA_BASE_ADDR (0x22000 + MX1_IO_BASE_ADDR) -#define MX1_AVIC_BASE_ADDR (0x23000 + MX1_IO_BASE_ADDR) -#define MX1_CSI_BASE_ADDR (0x24000 + MX1_IO_BASE_ADDR) - -/* macro to get at IO space when running virtually */ -#define MX1_IO_P2V(x) IMX_IO_P2V(x) -#define MX1_IO_ADDRESS(x) IOMEM(MX1_IO_P2V(x)) - -/* fixed interrput numbers */ -#include <asm/irq.h> -#define MX1_INT_SOFTINT (NR_IRQS_LEGACY + 0) -#define MX1_INT_CSI (NR_IRQS_LEGACY + 6) -#define MX1_DSPA_MAC_INT (NR_IRQS_LEGACY + 7) -#define MX1_DSPA_INT (NR_IRQS_LEGACY + 8) -#define MX1_COMP_INT (NR_IRQS_LEGACY + 9) -#define MX1_MSHC_XINT (NR_IRQS_LEGACY + 10) -#define MX1_GPIO_INT_PORTA (NR_IRQS_LEGACY + 11) -#define MX1_GPIO_INT_PORTB (NR_IRQS_LEGACY + 12) -#define MX1_GPIO_INT_PORTC (NR_IRQS_LEGACY + 13) -#define MX1_INT_LCDC (NR_IRQS_LEGACY + 14) -#define MX1_SIM_INT (NR_IRQS_LEGACY + 15) -#define MX1_SIM_DATA_INT (NR_IRQS_LEGACY + 16) -#define MX1_RTC_INT (NR_IRQS_LEGACY + 17) -#define MX1_RTC_SAMINT (NR_IRQS_LEGACY + 18) -#define MX1_INT_UART2PFERR (NR_IRQS_LEGACY + 19) -#define MX1_INT_UART2RTS (NR_IRQS_LEGACY + 20) -#define MX1_INT_UART2DTR (NR_IRQS_LEGACY + 21) -#define MX1_INT_UART2UARTC (NR_IRQS_LEGACY + 22) -#define MX1_INT_UART2TX (NR_IRQS_LEGACY + 23) -#define MX1_INT_UART2RX (NR_IRQS_LEGACY + 24) -#define MX1_INT_UART1PFERR (NR_IRQS_LEGACY + 25) -#define MX1_INT_UART1RTS (NR_IRQS_LEGACY + 26) -#define MX1_INT_UART1DTR (NR_IRQS_LEGACY + 27) -#define MX1_INT_UART1UARTC (NR_IRQS_LEGACY + 28) -#define MX1_INT_UART1TX (NR_IRQS_LEGACY + 29) -#define MX1_INT_UART1RX (NR_IRQS_LEGACY + 30) -#define MX1_VOICE_DAC_INT (NR_IRQS_LEGACY + 31) -#define MX1_VOICE_ADC_INT (NR_IRQS_LEGACY + 32) -#define MX1_PEN_DATA_INT (NR_IRQS_LEGACY + 33) -#define MX1_PWM_INT (NR_IRQS_LEGACY + 34) -#define MX1_SDHC_INT (NR_IRQS_LEGACY + 35) -#define MX1_INT_I2C (NR_IRQS_LEGACY + 39) -#define MX1_INT_CSPI2 (NR_IRQS_LEGACY + 40) -#define MX1_INT_CSPI1 (NR_IRQS_LEGACY + 41) -#define MX1_SSI_TX_INT (NR_IRQS_LEGACY + 42) -#define MX1_SSI_TX_ERR_INT (NR_IRQS_LEGACY + 43) -#define MX1_SSI_RX_INT (NR_IRQS_LEGACY + 44) -#define MX1_SSI_RX_ERR_INT (NR_IRQS_LEGACY + 45) -#define MX1_TOUCH_INT (NR_IRQS_LEGACY + 46) -#define MX1_INT_USBD0 (NR_IRQS_LEGACY + 47) -#define MX1_INT_USBD1 (NR_IRQS_LEGACY + 48) -#define MX1_INT_USBD2 (NR_IRQS_LEGACY + 49) -#define MX1_INT_USBD3 (NR_IRQS_LEGACY + 50) -#define MX1_INT_USBD4 (NR_IRQS_LEGACY + 51) -#define MX1_INT_USBD5 (NR_IRQS_LEGACY + 52) -#define MX1_INT_USBD6 (NR_IRQS_LEGACY + 53) -#define MX1_BTSYS_INT (NR_IRQS_LEGACY + 55) -#define MX1_BTTIM_INT (NR_IRQS_LEGACY + 56) -#define MX1_BTWUI_INT (NR_IRQS_LEGACY + 57) -#define MX1_TIM2_INT (NR_IRQS_LEGACY + 58) -#define MX1_TIM1_INT (NR_IRQS_LEGACY + 59) -#define MX1_DMA_ERR (NR_IRQS_LEGACY + 60) -#define MX1_DMA_INT (NR_IRQS_LEGACY + 61) -#define MX1_GPIO_INT_PORTD (NR_IRQS_LEGACY + 62) -#define MX1_WDT_INT (NR_IRQS_LEGACY + 63) - -/* DMA */ -#define MX1_DMA_REQ_UART3_T 2 -#define MX1_DMA_REQ_UART3_R 3 -#define MX1_DMA_REQ_SSI2_T 4 -#define MX1_DMA_REQ_SSI2_R 5 -#define MX1_DMA_REQ_CSI_STAT 6 -#define MX1_DMA_REQ_CSI_R 7 -#define MX1_DMA_REQ_MSHC 8 -#define MX1_DMA_REQ_DSPA_DCT_DOUT 9 -#define MX1_DMA_REQ_DSPA_DCT_DIN 10 -#define MX1_DMA_REQ_DSPA_MAC 11 -#define MX1_DMA_REQ_EXT 12 -#define MX1_DMA_REQ_SDHC 13 -#define MX1_DMA_REQ_SPI1_R 14 -#define MX1_DMA_REQ_SPI1_T 15 -#define MX1_DMA_REQ_SSI_T 16 -#define MX1_DMA_REQ_SSI_R 17 -#define MX1_DMA_REQ_ASP_DAC 18 -#define MX1_DMA_REQ_ASP_ADC 19 -#define MX1_DMA_REQ_USP_EP(x) (20 + (x)) -#define MX1_DMA_REQ_SPI2_R 26 -#define MX1_DMA_REQ_SPI2_T 27 -#define MX1_DMA_REQ_UART2_T 28 -#define MX1_DMA_REQ_UART2_R 29 -#define MX1_DMA_REQ_UART1_T 30 -#define MX1_DMA_REQ_UART1_R 31 - -/* - * This doesn't depend on IMX_NEEDS_DEPRECATED_SYMBOLS - * to not break drivers/usb/gadget/imx_udc. Should go - * away after this driver uses the new name. - */ -#define USBD_INT0 MX1_INT_USBD0 - -#endif /* ifndef __MACH_MX1_H__ */ diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c index 549648309deb..1515e498d348 100644 --- a/arch/arm/mach-imx/pm-imx6.c +++ b/arch/arm/mach-imx/pm-imx6.c @@ -295,7 +295,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode) val &= ~BM_CLPCR_SBYOS; if (cpu_is_imx6sl()) val |= BM_CLPCR_BYPASS_PMIC_READY; - if (cpu_is_imx6sl() || cpu_is_imx6sx()) + if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul()) val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS; else val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS; @@ -310,7 +310,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode) val |= 0x3 << BP_CLPCR_STBY_COUNT; val |= BM_CLPCR_VSTBY; val |= BM_CLPCR_SBYOS; - if (cpu_is_imx6sl()) + if (cpu_is_imx6sl() || cpu_is_imx6sx()) val |= BM_CLPCR_BYPASS_PMIC_READY; if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul()) val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS; diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index 599f973e10d8..cefe44f6889b 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -21,7 +21,6 @@ if ARCH_INTEGRATOR config ARCH_INTEGRATOR_AP bool "Support Integrator/AP and Integrator/PP2 platforms" select INTEGRATOR_AP_TIMER - select MIGHT_HAVE_PCI select SERIAL_AMBA_PL010 if TTY select SERIAL_AMBA_PL010_CONSOLE if TTY select SOC_BUS diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig index 8ff61be1a29f..24bd64dabdfc 100644 --- a/arch/arm/mach-keystone/Kconfig +++ b/arch/arm/mach-keystone/Kconfig @@ -8,8 +8,6 @@ config ARCH_KEYSTONE select COMMON_CLK_KEYSTONE select ARCH_SUPPORTS_BIG_ENDIAN select ZONE_DMA if ARM_LPAE - select MIGHT_HAVE_PCI - select PCI_DOMAINS if PCI select PINCTRL help Support for boards based on the Texas Instruments Keystone family of diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 0b7fe74ff46d..e4f21086b42b 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -268,80 +268,6 @@ static void __init apx4devkit_init(void) apx4devkit_phy_fixup); } -#define ENET0_MDC__GPIO_4_0 MXS_GPIO_NR(4, 0) -#define ENET0_MDIO__GPIO_4_1 MXS_GPIO_NR(4, 1) -#define ENET0_RX_EN__GPIO_4_2 MXS_GPIO_NR(4, 2) -#define ENET0_RXD0__GPIO_4_3 MXS_GPIO_NR(4, 3) -#define ENET0_RXD1__GPIO_4_4 MXS_GPIO_NR(4, 4) -#define ENET0_TX_EN__GPIO_4_6 MXS_GPIO_NR(4, 6) -#define ENET0_TXD0__GPIO_4_7 MXS_GPIO_NR(4, 7) -#define ENET0_TXD1__GPIO_4_8 MXS_GPIO_NR(4, 8) -#define ENET_CLK__GPIO_4_16 MXS_GPIO_NR(4, 16) - -#define TX28_FEC_PHY_POWER MXS_GPIO_NR(3, 29) -#define TX28_FEC_PHY_RESET MXS_GPIO_NR(4, 13) -#define TX28_FEC_nINT MXS_GPIO_NR(4, 5) - -static const struct gpio const tx28_gpios[] __initconst = { - { ENET0_MDC__GPIO_4_0, GPIOF_OUT_INIT_LOW, "GPIO_4_0" }, - { ENET0_MDIO__GPIO_4_1, GPIOF_OUT_INIT_LOW, "GPIO_4_1" }, - { ENET0_RX_EN__GPIO_4_2, GPIOF_OUT_INIT_LOW, "GPIO_4_2" }, - { ENET0_RXD0__GPIO_4_3, GPIOF_OUT_INIT_LOW, "GPIO_4_3" }, - { ENET0_RXD1__GPIO_4_4, GPIOF_OUT_INIT_LOW, "GPIO_4_4" }, - { ENET0_TX_EN__GPIO_4_6, GPIOF_OUT_INIT_LOW, "GPIO_4_6" }, - { ENET0_TXD0__GPIO_4_7, GPIOF_OUT_INIT_LOW, "GPIO_4_7" }, - { ENET0_TXD1__GPIO_4_8, GPIOF_OUT_INIT_LOW, "GPIO_4_8" }, - { ENET_CLK__GPIO_4_16, GPIOF_OUT_INIT_LOW, "GPIO_4_16" }, - { TX28_FEC_PHY_POWER, GPIOF_OUT_INIT_LOW, "fec-phy-power" }, - { TX28_FEC_PHY_RESET, GPIOF_OUT_INIT_LOW, "fec-phy-reset" }, - { TX28_FEC_nINT, GPIOF_DIR_IN, "fec-int" }, -}; - -static void __init tx28_post_init(void) -{ - struct device_node *np; - struct platform_device *pdev; - struct pinctrl *pctl; - int ret; - - enable_clk_enet_out(); - - np = of_find_compatible_node(NULL, NULL, "fsl,imx28-fec"); - pdev = of_find_device_by_node(np); - if (!pdev) { - pr_err("%s: failed to find fec device\n", __func__); - return; - } - - pctl = pinctrl_get_select(&pdev->dev, "gpio_mode"); - if (IS_ERR(pctl)) { - pr_err("%s: failed to get pinctrl state\n", __func__); - return; - } - - ret = gpio_request_array(tx28_gpios, ARRAY_SIZE(tx28_gpios)); - if (ret) { - pr_err("%s: failed to request gpios: %d\n", __func__, ret); - return; - } - - /* Power up fec phy */ - gpio_set_value(TX28_FEC_PHY_POWER, 1); - msleep(26); /* 25ms according to data sheet */ - - /* Mode strap pins */ - gpio_set_value(ENET0_RX_EN__GPIO_4_2, 1); - gpio_set_value(ENET0_RXD0__GPIO_4_3, 1); - gpio_set_value(ENET0_RXD1__GPIO_4_4, 1); - - udelay(100); /* minimum assertion time for nRST */ - - /* Deasserting FEC PHY RESET */ - gpio_set_value(TX28_FEC_PHY_RESET, 1); - - pinctrl_put(pctl); -} - static void __init crystalfontz_init(void) { update_fec_mac_prop(OUI_CRYSTALFONTZ); @@ -501,9 +427,6 @@ static void __init mxs_machine_init(void) of_platform_default_populate(NULL, NULL, parent); mxs_restart_init(); - - if (of_machine_is_compatible("karo,tx28")) - tx28_post_init(); } #define MXS_CLKCTRL_RESET_CHIP (1 << 1) diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c index 7119ef28e0ad..357be2debc9d 100644 --- a/arch/arm/mach-omap1/board-h2-mmc.c +++ b/arch/arm/mach-omap1/board-h2-mmc.c @@ -19,7 +19,7 @@ #include "board-h2.h" #include "mmc.h" -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) +#if IS_ENABLED(CONFIG_MMC_OMAP) static int mmc_set_power(struct device *dev, int slot, int power_on, int vdd) diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index cd146ed0538d..675254ee4b1e 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -349,7 +349,7 @@ static struct omap_usb_config h2_usb_config __initdata = { #if IS_ENABLED(CONFIG_USB_OMAP) .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */ /* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */ -#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +#elif IS_ENABLED(CONFIG_USB_OHCI_HCD) /* needs OTG cable, or NONSTANDARD (B-to-MiniB) */ .hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */ #endif diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c index 43aab63cbc39..4f58bfa5e754 100644 --- a/arch/arm/mach-omap1/board-h3-mmc.c +++ b/arch/arm/mach-omap1/board-h3-mmc.c @@ -20,7 +20,7 @@ #include "board-h3.h" #include "mmc.h" -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) +#if IS_ENABLED(CONFIG_MMC_OMAP) static int mmc_set_power(struct device *dev, int slot, int power_on, int vdd) diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index f7c8c63dd532..e62f9d454f10 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -368,7 +368,7 @@ static struct omap_usb_config h3_usb_config __initdata = { #if IS_ENABLED(CONFIG_USB_OMAP) .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */ -#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +#elif IS_ENABLED(CONFIG_USB_OHCI_HCD) /* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */ .hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */ #endif diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 9525ef9bc6c0..e424df901dbd 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -401,7 +401,7 @@ static struct platform_device lcd_device = { }; /* MMC Card */ -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) +#if IS_ENABLED(CONFIG_MMC_OMAP) static struct omap_mmc_platform_data htc_mmc1_data = { .nr_slots = 1, .switch_slot = NULL, @@ -586,7 +586,7 @@ static void __init htcherald_init(void) omap_register_i2c_bus(1, 100, NULL, 0); -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) +#if IS_ENABLED(CONFIG_MMC_OMAP) htc_mmc_data[0] = &htc_mmc1_data; omap1_init_mmc(htc_mmc_data, 1); #endif diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index ae90bd02b3bf..67e188271643 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -315,7 +315,7 @@ static struct omap_usb_config h2_usb_config __initdata = { #if IS_ENABLED(CONFIG_USB_OMAP) .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */ /* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */ -#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +#elif IS_ENABLED(CONFIG_USB_OHCI_HCD) /* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */ .hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */ #endif @@ -328,7 +328,7 @@ static struct omap_lcd_config innovator1610_lcd_config __initdata = { }; #endif -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) +#if IS_ENABLED(CONFIG_MMC_OMAP) static int mmc_set_power(struct device *dev, int slot, int power_on, int vdd) diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index dd3a3ad797ea..ee8d9f553db4 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -159,7 +159,7 @@ static struct omap_usb_config nokia770_usb_config __initdata = { .extcon = "tahvo-usb", }; -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) +#if IS_ENABLED(CONFIG_MMC_OMAP) #define NOKIA770_GPIO_MMC_POWER 41 #define NOKIA770_GPIO_MMC_SWITCH 23 @@ -216,7 +216,7 @@ static inline void nokia770_mmc_init(void) } #endif -#if defined(CONFIG_I2C_CBUS_GPIO) || defined(CONFIG_I2C_CBUS_GPIO_MODULE) +#if IS_ENABLED(CONFIG_I2C_CBUS_GPIO) static struct i2c_cbus_platform_data nokia770_cbus_data = { .clk_gpio = OMAP_MPUIO(9), .dat_gpio = OMAP_MPUIO(10), diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c index a9373570bbb1..79f0af8bfae0 100644 --- a/arch/arm/mach-omap1/board-sx1-mmc.c +++ b/arch/arm/mach-omap1/board-sx1-mmc.c @@ -20,7 +20,7 @@ #include "mmc.h" -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) +#if IS_ENABLED(CONFIG_MMC_OMAP) static int mmc_set_power(struct device *dev, int slot, int power_on, int vdd) diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 8c8be861fff2..baaf902b7016 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -33,7 +33,7 @@ #include "mmc.h" #include "sram.h" -#if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE) +#if IS_ENABLED(CONFIG_RTC_DRV_OMAP) #define OMAP_RTC_BASE 0xfffb4800 @@ -72,7 +72,7 @@ static inline void omap_init_mbox(void) { } /*-------------------------------------------------------------------------*/ -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) +#if IS_ENABLED(CONFIG_MMC_OMAP) static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller, int controller_nr) @@ -230,7 +230,7 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, /*-------------------------------------------------------------------------*/ /* OMAP7xx SPI support */ -#if defined(CONFIG_SPI_OMAP_100K) || defined(CONFIG_SPI_OMAP_100K_MODULE) +#if IS_ENABLED(CONFIG_SPI_OMAP_100K) struct platform_device omap_spi1 = { .name = "omap1_spi100k", @@ -312,7 +312,7 @@ static inline void omap_init_sti(void) {} * mcbsp1..3 = 5..7 */ -#if defined(CONFIG_SPI_OMAP_UWIRE) || defined(CONFIG_SPI_OMAP_UWIRE_MODULE) +#if IS_ENABLED(CONFIG_SPI_OMAP_UWIRE) #define OMAP_UWIRE_BASE 0xfffb3000 @@ -418,7 +418,7 @@ static int __init omap1_init_devices(void) } arch_initcall(omap1_init_devices); -#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE) +#if IS_ENABLED(CONFIG_OMAP_WATCHDOG) static struct resource wdt_resources[] = { { diff --git a/arch/arm/mach-omap1/fb.c b/arch/arm/mach-omap1/fb.c index c770d45c7226..ddab04087b7a 100644 --- a/arch/arm/mach-omap1/fb.c +++ b/arch/arm/mach-omap1/fb.c @@ -33,7 +33,7 @@ #include <asm/mach/map.h> -#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) +#if IS_ENABLED(CONFIG_FB_OMAP) static bool omapfb_lcd_configured; static struct omapfb_platform_data omapfb_config; diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h index 2c263051dc51..a7c5559caef2 100644 --- a/arch/arm/mach-omap1/include/mach/usb.h +++ b/arch/arm/mach-omap1/include/mach/usb.h @@ -12,7 +12,7 @@ void omap_otg_init(struct omap_usb_config *config); -#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE) +#if IS_ENABLED(CONFIG_USB) void omap1_usb_init(struct omap_usb_config *pdata); #else static inline void omap1_usb_init(struct omap_usb_config *pdata) diff --git a/arch/arm/mach-omap1/mmc.h b/arch/arm/mach-omap1/mmc.h index 39c2b13de884..d7b46880e4ca 100644 --- a/arch/arm/mach-omap1/mmc.h +++ b/arch/arm/mach-omap1/mmc.h @@ -7,7 +7,7 @@ #define OMAP1_MMC1_BASE 0xfffb7800 #define OMAP1_MMC2_BASE 0xfffb7c00 /* omap16xx only */ -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) +#if IS_ENABLED(CONFIG_MMC_OMAP) void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, int nr_controllers); #else diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c index 4118db50d5e8..2506e598a067 100644 --- a/arch/arm/mach-omap1/usb.c +++ b/arch/arm/mach-omap1/usb.c @@ -136,7 +136,7 @@ omap_otg_init(struct omap_usb_config *config) } #endif -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_OHCI_HCD) if (config->otg || config->register_host) { struct platform_device *ohci_device = config->ohci_device; int status; @@ -221,7 +221,7 @@ static inline void udc_device_init(struct omap_usb_config *pdata) #endif -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_OHCI_HCD) /* The dmamask must be set for OHCI to work */ static u64 ohci_dmamask = ~(u32)0; @@ -612,7 +612,7 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config) } #endif -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) +#if IS_ENABLED(CONFIG_USB_OHCI_HCD) if (config->register_host) { int status; diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 5a0b380a8166..a9afeebd59f2 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -192,12 +192,6 @@ config MACH_OMAP2_TUSB6010 depends on ARCH_OMAP2 && SOC_OMAP2420 default y if MACH_NOKIA_N8X0 -config MACH_OMAP_LDP - bool "OMAP3 LDP board" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CBB - config MACH_OMAP3517EVM bool "OMAP3517/ AM3517 EVM board" depends on ARCH_OMAP3 @@ -222,12 +216,6 @@ config MACH_NOKIA_N8X0 select MACH_NOKIA_N810 select MACH_NOKIA_N810_WIMAX -config MACH_NOKIA_RX51 - bool "Nokia N900 (RX-51) phone" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CBB - config OMAP3_SDRC_AC_TIMING bool "Enable SDRC AC timing register changes" depends on ARCH_OMAP3 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index a7f2d051f524..5b37ec29996e 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -231,11 +231,7 @@ obj-$(CONFIG_SOC_OMAP2420) += msdi.o # Specific board support obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o pdata-quirks.o -obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o -obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o sdram-nokia.o -obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-peripherals.o -obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-video.o # Platform specific device init code diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index 70b21cc279ba..2188dc30e232 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -81,8 +81,7 @@ __init board_nor_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs) pr_err("Unable to register NOR device\n"); } -#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ - defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) +#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2) static struct omap_onenand_platform_data board_onenand_data = { .dma_channel = -1, /* disable DMA in OMAP OneNAND driver */ }; @@ -97,10 +96,9 @@ __init board_onenand_init(struct mtd_partition *onenand_parts, gpmc_onenand_init(&board_onenand_data); } -#endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */ +#endif /* IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2) */ -#if defined(CONFIG_MTD_NAND_OMAP2) || \ - defined(CONFIG_MTD_NAND_OMAP2_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2) /* Note that all values in this struct are in nanoseconds */ struct gpmc_timings nand_default_timings[1] = { @@ -144,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs, board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_SW; gpmc_nand_init(&board_nand_data, gpmc_t); } -#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */ +#endif /* IS_ENABLED(CONFIG_MTD_NAND_OMAP2) */ /** * get_gpmc0_type - Reads the FPGA DIP_SWITCH_INPUT_REGISTER2 to get diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h index ea9aaebe11e7..8b39eec07318 100644 --- a/arch/arm/mach-omap2/board-flash.h +++ b/arch/arm/mach-omap2/board-flash.h @@ -23,10 +23,7 @@ struct flash_partitions { int nr_parts; }; -#if defined(CONFIG_MTD_NAND_OMAP2) || \ - defined(CONFIG_MTD_NAND_OMAP2_MODULE) || \ - defined(CONFIG_MTD_ONENAND_OMAP2) || \ - defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2) || IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2) extern void board_flash_init(struct flash_partitions [], char chip_sel[][GPMC_CS_NUM], int nand_type); #else @@ -36,8 +33,7 @@ static inline void board_flash_init(struct flash_partitions part[], } #endif -#if defined(CONFIG_MTD_NAND_OMAP2) || \ - defined(CONFIG_MTD_NAND_OMAP2_MODULE) +#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2) extern void board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t); extern struct gpmc_timings nand_default_timings[]; @@ -49,8 +45,7 @@ static inline void board_nand_init(struct mtd_partition *nand_parts, #define nand_default_timings NULL #endif -#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ - defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) +#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2) extern void board_onenand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs); #else diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c deleted file mode 100644 index 390795b334c3..000000000000 --- a/arch/arm/mach-omap2/board-ldp.c +++ /dev/null @@ -1,430 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/board-ldp.c - * - * Copyright (C) 2008 Texas Instruments Inc. - * Nishant Kamat <nskamat@ti.com> - * - * Modified from mach-omap2/board-3430sdp.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/input.h> -#include <linux/input/matrix_keypad.h> -#include <linux/gpio_keys.h> -#include <linux/workqueue.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/spi/spi.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/machine.h> -#include <linux/i2c/twl.h> -#include <linux/io.h> -#include <linux/smsc911x.h> -#include <linux/mmc/host.h> -#include <linux/usb/phy.h> -#include <linux/platform_data/spi-omap2-mcspi.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "common.h" -#include "gpmc.h" -#include "gpmc-smsc911x.h" - -#include <linux/platform_data/omapdss.h> -#include <video/omap-panel-data.h> - -#include "board-flash.h" -#include "mux.h" -#include "hsmmc.h" -#include "control.h" -#include "common-board-devices.h" -#include "display.h" - -#define LDP_SMSC911X_CS 1 -#define LDP_SMSC911X_GPIO 152 -#define DEBUG_BASE 0x08000000 -#define LDP_ETHR_START DEBUG_BASE - -static uint32_t board_keymap[] = { - KEY(0, 0, KEY_1), - KEY(1, 0, KEY_2), - KEY(2, 0, KEY_3), - KEY(0, 1, KEY_4), - KEY(1, 1, KEY_5), - KEY(2, 1, KEY_6), - KEY(3, 1, KEY_F5), - KEY(0, 2, KEY_7), - KEY(1, 2, KEY_8), - KEY(2, 2, KEY_9), - KEY(3, 2, KEY_F6), - KEY(0, 3, KEY_F7), - KEY(1, 3, KEY_0), - KEY(2, 3, KEY_F8), - PERSISTENT_KEY(4, 5), - KEY(4, 4, KEY_VOLUMEUP), - KEY(5, 5, KEY_VOLUMEDOWN), - 0 -}; - -static struct matrix_keymap_data board_map_data = { - .keymap = board_keymap, - .keymap_size = ARRAY_SIZE(board_keymap), -}; - -static struct twl4030_keypad_data ldp_kp_twl4030_data = { - .keymap_data = &board_map_data, - .rows = 6, - .cols = 6, - .rep = 1, -}; - -static struct gpio_keys_button ldp_gpio_keys_buttons[] = { - [0] = { - .code = KEY_ENTER, - .gpio = 101, - .desc = "enter sw", - .active_low = 1, - .debounce_interval = 30, - }, - [1] = { - .code = KEY_F1, - .gpio = 102, - .desc = "func 1", - .active_low = 1, - .debounce_interval = 30, - }, - [2] = { - .code = KEY_F2, - .gpio = 103, - .desc = "func 2", - .active_low = 1, - .debounce_interval = 30, - }, - [3] = { - .code = KEY_F3, - .gpio = 104, - .desc = "func 3", - .active_low = 1, - .debounce_interval = 30, - }, - [4] = { - .code = KEY_F4, - .gpio = 105, - .desc = "func 4", - .active_low = 1, - .debounce_interval = 30, - }, - [5] = { - .code = KEY_LEFT, - .gpio = 106, - .desc = "left sw", - .active_low = 1, - .debounce_interval = 30, - }, - [6] = { - .code = KEY_RIGHT, - .gpio = 107, - .desc = "right sw", - .active_low = 1, - .debounce_interval = 30, - }, - [7] = { - .code = KEY_UP, - .gpio = 108, - .desc = "up sw", - .active_low = 1, - .debounce_interval = 30, - }, - [8] = { - .code = KEY_DOWN, - .gpio = 109, - .desc = "down sw", - .active_low = 1, - .debounce_interval = 30, - }, -}; - -static struct gpio_keys_platform_data ldp_gpio_keys = { - .buttons = ldp_gpio_keys_buttons, - .nbuttons = ARRAY_SIZE(ldp_gpio_keys_buttons), - .rep = 1, -}; - -static struct platform_device ldp_gpio_keys_device = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &ldp_gpio_keys, - }, -}; - -static struct omap_smsc911x_platform_data smsc911x_cfg = { - .cs = LDP_SMSC911X_CS, - .gpio_irq = LDP_SMSC911X_GPIO, - .gpio_reset = -EINVAL, - .flags = SMSC911X_USE_32BIT, -}; - -static inline void __init ldp_init_smsc911x(void) -{ - gpmc_smsc911x_init(&smsc911x_cfg); -} - -/* LCD */ - -#define LCD_PANEL_RESET_GPIO 55 -#define LCD_PANEL_QVGA_GPIO 56 - -static const struct display_timing ldp_lcd_videomode = { - .pixelclock = { 0, 5400000, 0 }, - - .hactive = { 0, 240, 0 }, - .hfront_porch = { 0, 3, 0 }, - .hback_porch = { 0, 39, 0 }, - .hsync_len = { 0, 3, 0 }, - - .vactive = { 0, 320, 0 }, - .vfront_porch = { 0, 2, 0 }, - .vback_porch = { 0, 7, 0 }, - .vsync_len = { 0, 1, 0 }, - - .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | - DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE, -}; - -static struct panel_dpi_platform_data ldp_lcd_pdata = { - .name = "lcd", - .source = "dpi.0", - - .data_lines = 18, - - .display_timing = &ldp_lcd_videomode, - - .enable_gpio = -1, /* filled in code */ - .backlight_gpio = -1, /* filled in code */ -}; - -static struct platform_device ldp_lcd_device = { - .name = "panel-dpi", - .id = 0, - .dev.platform_data = &ldp_lcd_pdata, -}; - -static struct omap_dss_board_info ldp_dss_data = { - .default_display_name = "lcd", -}; - -static void __init ldp_display_init(void) -{ - int r; - - static struct gpio gpios[] __initdata = { - {LCD_PANEL_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "LCD RESET"}, - {LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "LCD QVGA"}, - }; - - r = gpio_request_array(gpios, ARRAY_SIZE(gpios)); - if (r) { - pr_err("Cannot request LCD GPIOs, error %d\n", r); - return; - } - - omap_display_init(&ldp_dss_data); -} - -static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) -{ - int res; - - /* LCD enable GPIO */ - ldp_lcd_pdata.enable_gpio = gpio + 7; - - /* Backlight enable GPIO */ - ldp_lcd_pdata.backlight_gpio = gpio + 15; - - res = platform_device_register(&ldp_lcd_device); - if (res) - pr_err("Unable to register LCD: %d\n", res); - - return 0; -} - -static struct twl4030_gpio_platform_data ldp_gpio_data = { - .setup = ldp_twl_gpio_setup, -}; - -static struct regulator_consumer_supply ldp_vmmc1_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - -/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ -static struct regulator_init_data ldp_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ldp_vmmc1_supply), - .consumer_supplies = ldp_vmmc1_supply, -}; - -/* ads7846 on SPI */ -static struct regulator_consumer_supply ldp_vaux1_supplies[] = { - REGULATOR_SUPPLY("vcc", "spi1.0"), -}; - -/* VAUX1 */ -static struct regulator_init_data ldp_vaux1 = { - .constraints = { - .min_uV = 3000000, - .max_uV = 3000000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ldp_vaux1_supplies), - .consumer_supplies = ldp_vaux1_supplies, -}; - -static struct regulator_consumer_supply ldp_vpll2_supplies[] = { - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"), -}; - -static struct regulator_init_data ldp_vpll2 = { - .constraints = { - .name = "VDVI", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ldp_vpll2_supplies), - .consumer_supplies = ldp_vpll2_supplies, -}; - -static struct twl4030_platform_data ldp_twldata = { - /* platform_data for children goes here */ - .vmmc1 = &ldp_vmmc1, - .vaux1 = &ldp_vaux1, - .vpll2 = &ldp_vpll2, - .gpio = &ldp_gpio_data, - .keypad = &ldp_kp_twl4030_data, -}; - -static int __init omap_i2c_init(void) -{ - omap3_pmic_get_config(&ldp_twldata, - TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, 0); - omap3_pmic_init("twl4030", &ldp_twldata); - omap_register_i2c_bus(2, 400, NULL, 0); - omap_register_i2c_bus(3, 400, NULL, 0); - return 0; -} - -static struct omap2_hsmmc_info mmc[] __initdata = { - { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - }, - {} /* Terminator */ -}; - -static struct platform_device *ldp_devices[] __initdata = { - &ldp_gpio_keys_device, -}; - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static struct mtd_partition ldp_nand_partitions[] = { - /* All the partition sizes are listed in terms of NAND block size */ - { - .name = "X-Loader-NAND", - .offset = 0, - .size = 4 * (64 * 2048), /* 512KB, 0x80000 */ - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "U-Boot-NAND", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ - .size = 10 * (64 * 2048), /* 1.25MB, 0x140000 */ - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "Boot Env-NAND", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x1c0000 */ - .size = 2 * (64 * 2048), /* 256KB, 0x40000 */ - }, - { - .name = "Kernel-NAND", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x0200000*/ - .size = 240 * (64 * 2048), /* 30M, 0x1E00000 */ - }, - { - .name = "File System - NAND", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x2000000 */ - .size = MTDPART_SIZ_FULL, /* 96MB, 0x6000000 */ - }, - -}; - -static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x.0"), - REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), -}; - -static void __init omap_ldp_init(void) -{ - regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - ldp_init_smsc911x(); - omap_i2c_init(); - platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices)); - omap_ads7846_init(1, 54, 310, NULL); - omap_serial_init(); - omap_sdrc_init(NULL, NULL); - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); - usb_musb_init(NULL); - board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions), - 0, 0, nand_default_timings); - - omap_hsmmc_init(mmc); - ldp_display_init(); -} - -MACHINE_START(OMAP_LDP, "OMAP LDP board") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap3430_init_early, - .init_irq = omap3_init_irq, - .init_machine = omap_ldp_init, - .init_late = omap3430_init_late, - .init_time = omap_init_time, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index b6443a4e0c78..6b6fda65fb3b 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -66,7 +66,7 @@ static void board_check_revision(void) pr_err("Unknown board\n"); } -#if defined(CONFIG_USB_MUSB_TUSB6010) || defined(CONFIG_USB_MUSB_TUSB6010_MODULE) +#if IS_ENABLED(CONFIG_USB_MUSB_TUSB6010) /* * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and * 1.5 V voltage regulators of PM companion chip. Companion chip will then @@ -163,8 +163,7 @@ static struct spi_board_info n800_spi_board_info[] __initdata = { }, }; -#if defined(CONFIG_MENELAUS) && \ - (defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)) +#if defined(CONFIG_MENELAUS) && IS_ENABLED(CONFIG_MMC_OMAP) /* * On both N800 and N810, only the first of the two MMC controllers is in use. diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c deleted file mode 100644 index a5ab712c1a59..000000000000 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ /dev/null @@ -1,1312 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/board-rx51-peripherals.c - * - * Copyright (C) 2008-2009 Nokia - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/input.h> -#include <linux/input/matrix_keypad.h> -#include <linux/spi/spi.h> -#include <linux/wl12xx.h> -#include <linux/spi/tsc2005.h> -#include <linux/i2c.h> -#include <linux/i2c/twl.h> -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/regulator/machine.h> -#include <linux/gpio.h> -#include <linux/gpio_keys.h> -#include <linux/gpio/machine.h> -#include <linux/omap-gpmc.h> -#include <linux/mmc/host.h> -#include <linux/power/isp1704_charger.h> -#include <linux/platform_data/spi-omap2-mcspi.h> -#include <linux/platform_data/mtd-onenand-omap2.h> - -#include <plat/dmtimer.h> - -#include <asm/system_info.h> - -#include "common.h" -#include <linux/omap-dma.h> - -#include "board-rx51.h" - -#include <sound/tlv320aic3x.h> -#include <sound/tpa6130a2-plat.h> -#include <linux/platform_data/media/si4713.h> -#include <linux/platform_data/leds-lp55xx.h> - -#include <linux/platform_data/tsl2563.h> -#include <linux/lis3lv02d.h> - -#include <video/omap-panel-data.h> - -#include <linux/platform_data/pwm_omap_dmtimer.h> -#include <linux/platform_data/media/ir-rx51.h> - -#include "mux.h" -#include "omap-pm.h" -#include "hsmmc.h" -#include "common-board-devices.h" -#include "soc.h" -#include "omap-secure.h" - -#define SYSTEM_REV_B_USES_VAUX3 0x1699 -#define SYSTEM_REV_S_USES_VAUX3 0x8 - -#define RX51_WL1251_POWER_GPIO 87 -#define RX51_WL1251_IRQ_GPIO 42 -#define RX51_FMTX_RESET_GPIO 163 -#define RX51_FMTX_IRQ 53 -#define RX51_LP5523_CHIP_EN_GPIO 41 - -#define RX51_USB_TRANSCEIVER_RST_GPIO 67 - -#define RX51_TSC2005_RESET_GPIO 104 -#define RX51_TSC2005_IRQ_GPIO 100 - -#define LIS302_IRQ1_GPIO 181 -#define LIS302_IRQ2_GPIO 180 /* Not yet in use */ - -/* List all SPI devices here. Note that the list/probe order seems to matter! */ -enum { - RX51_SPI_WL1251, - RX51_SPI_TSC2005, /* Touch Controller */ - RX51_SPI_MIPID, /* LCD panel */ -}; - -static struct wl1251_platform_data wl1251_pdata; -static struct tsc2005_platform_data tsc2005_pdata; - -#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) -static int lis302_setup(void) -{ - int err; - int irq1 = LIS302_IRQ1_GPIO; - int irq2 = LIS302_IRQ2_GPIO; - - /* gpio for interrupt pin 1 */ - err = gpio_request(irq1, "lis3lv02dl_irq1"); - if (err) { - printk(KERN_ERR "lis3lv02dl: gpio request failed\n"); - goto out; - } - - /* gpio for interrupt pin 2 */ - err = gpio_request(irq2, "lis3lv02dl_irq2"); - if (err) { - gpio_free(irq1); - printk(KERN_ERR "lis3lv02dl: gpio request failed\n"); - goto out; - } - - gpio_direction_input(irq1); - gpio_direction_input(irq2); - -out: - return err; -} - -static int lis302_release(void) -{ - gpio_free(LIS302_IRQ1_GPIO); - gpio_free(LIS302_IRQ2_GPIO); - - return 0; -} - -static struct lis3lv02d_platform_data rx51_lis3lv02d_data = { - .click_flags = LIS3_CLICK_SINGLE_X | LIS3_CLICK_SINGLE_Y | - LIS3_CLICK_SINGLE_Z, - /* Limits are 0.5g * value */ - .click_thresh_x = 8, - .click_thresh_y = 8, - .click_thresh_z = 10, - /* Click must be longer than time limit */ - .click_time_limit = 9, - /* Kind of debounce filter */ - .click_latency = 50, - - /* Limits for all axis. millig-value / 18 to get HW values */ - .wakeup_flags = LIS3_WAKEUP_X_HI | LIS3_WAKEUP_Y_HI, - .wakeup_thresh = 800 / 18, - .wakeup_flags2 = LIS3_WAKEUP_Z_HI , - .wakeup_thresh2 = 900 / 18, - - .hipass_ctrl = LIS3_HIPASS1_DISABLE | LIS3_HIPASS2_DISABLE, - - /* Interrupt line 2 for click detection, line 1 for thresholds */ - .irq_cfg = LIS3_IRQ2_CLICK | LIS3_IRQ1_FF_WU_12, - - .axis_x = LIS3_DEV_X, - .axis_y = LIS3_INV_DEV_Y, - .axis_z = LIS3_INV_DEV_Z, - .setup_resources = lis302_setup, - .release_resources = lis302_release, - .st_min_limits = {-32, 3, 3}, - .st_max_limits = {-3, 32, 32}, -}; -#endif - -#if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE) -static struct tsl2563_platform_data rx51_tsl2563_platform_data = { - .cover_comp_gain = 16, -}; -#endif - -#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE) -static struct lp55xx_led_config rx51_lp5523_led_config[] = { - { - .name = "lp5523:kb1", - .chan_nr = 0, - .led_current = 50, - .max_current = 100, - }, { - .name = "lp5523:kb2", - .chan_nr = 1, - .led_current = 50, - .max_current = 100, - }, { - .name = "lp5523:kb3", - .chan_nr = 2, - .led_current = 50, - .max_current = 100, - }, { - .name = "lp5523:kb4", - .chan_nr = 3, - .led_current = 50, - .max_current = 100, - }, { - .name = "lp5523:b", - .chan_nr = 4, - .led_current = 50, - .max_current = 100, - }, { - .name = "lp5523:g", - .chan_nr = 5, - .led_current = 50, - .max_current = 100, - }, { - .name = "lp5523:r", - .chan_nr = 6, - .led_current = 50, - .max_current = 100, - }, { - .name = "lp5523:kb5", - .chan_nr = 7, - .led_current = 50, - .max_current = 100, - }, { - .name = "lp5523:kb6", - .chan_nr = 8, - .led_current = 50, - .max_current = 100, - } -}; - -static struct lp55xx_platform_data rx51_lp5523_platform_data = { - .led_config = rx51_lp5523_led_config, - .num_channels = ARRAY_SIZE(rx51_lp5523_led_config), - .clock_mode = LP55XX_CLOCK_AUTO, - .enable_gpio = RX51_LP5523_CHIP_EN_GPIO, -}; -#endif - -#define RX51_LCD_RESET_GPIO 90 - -static struct panel_acx565akm_platform_data acx_pdata = { - .name = "lcd", - .source = "sdi.0", - .reset_gpio = RX51_LCD_RESET_GPIO, - .datapairs = 2, -}; - -static struct omap2_mcspi_device_config wl1251_mcspi_config = { - .turbo_mode = 0, -}; - -static struct omap2_mcspi_device_config mipid_mcspi_config = { - .turbo_mode = 0, -}; - -static struct omap2_mcspi_device_config tsc2005_mcspi_config = { - .turbo_mode = 0, -}; - -static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { - [RX51_SPI_WL1251] = { - .modalias = "wl1251", - .bus_num = 4, - .chip_select = 0, - .max_speed_hz = 48000000, - .mode = SPI_MODE_3, - .controller_data = &wl1251_mcspi_config, - .platform_data = &wl1251_pdata, - }, - [RX51_SPI_MIPID] = { - .modalias = "acx565akm", - .bus_num = 1, - .chip_select = 2, - .max_speed_hz = 6000000, - .controller_data = &mipid_mcspi_config, - .platform_data = &acx_pdata, - }, - [RX51_SPI_TSC2005] = { - .modalias = "tsc2005", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 6000000, - .controller_data = &tsc2005_mcspi_config, - .platform_data = &tsc2005_pdata, - }, -}; - -static struct platform_device rx51_battery_device = { - .name = "rx51-battery", - .id = -1, -}; - -static void rx51_charger_set_power(bool on) -{ - gpio_set_value(RX51_USB_TRANSCEIVER_RST_GPIO, on); -} - -static struct isp1704_charger_data rx51_charger_data = { - .set_power = rx51_charger_set_power, -}; - -static struct platform_device rx51_charger_device = { - .name = "isp1704_charger", - .dev = { - .platform_data = &rx51_charger_data, - }, -}; - -static void __init rx51_charger_init(void) -{ - WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO, - GPIOF_OUT_INIT_HIGH, "isp1704_reset")); - - platform_device_register(&rx51_battery_device); - platform_device_register(&rx51_charger_device); -} - -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) - -#define RX51_GPIO_CAMERA_LENS_COVER 110 -#define RX51_GPIO_CAMERA_FOCUS 68 -#define RX51_GPIO_CAMERA_CAPTURE 69 -#define RX51_GPIO_KEYPAD_SLIDE 71 -#define RX51_GPIO_LOCK_BUTTON 113 -#define RX51_GPIO_PROXIMITY 89 - -#define RX51_GPIO_DEBOUNCE_TIMEOUT 10 - -static struct gpio_keys_button rx51_gpio_keys[] = { - { - .desc = "Camera Lens Cover", - .type = EV_SW, - .code = SW_CAMERA_LENS_COVER, - .gpio = RX51_GPIO_CAMERA_LENS_COVER, - .active_low = 1, - .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, - }, { - .desc = "Camera Focus", - .type = EV_KEY, - .code = KEY_CAMERA_FOCUS, - .gpio = RX51_GPIO_CAMERA_FOCUS, - .active_low = 1, - .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, - }, { - .desc = "Camera Capture", - .type = EV_KEY, - .code = KEY_CAMERA, - .gpio = RX51_GPIO_CAMERA_CAPTURE, - .active_low = 1, - .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, - }, { - .desc = "Lock Button", - .type = EV_KEY, - .code = KEY_SCREENLOCK, - .gpio = RX51_GPIO_LOCK_BUTTON, - .active_low = 1, - .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, - }, { - .desc = "Keypad Slide", - .type = EV_SW, - .code = SW_KEYPAD_SLIDE, - .gpio = RX51_GPIO_KEYPAD_SLIDE, - .active_low = 1, - .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, - }, { - .desc = "Proximity Sensor", - .type = EV_SW, - .code = SW_FRONT_PROXIMITY, - .gpio = RX51_GPIO_PROXIMITY, - .active_low = 0, - .debounce_interval = RX51_GPIO_DEBOUNCE_TIMEOUT, - } -}; - -static struct gpio_keys_platform_data rx51_gpio_keys_data = { - .buttons = rx51_gpio_keys, - .nbuttons = ARRAY_SIZE(rx51_gpio_keys), -}; - -static struct platform_device rx51_gpio_keys_device = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &rx51_gpio_keys_data, - }, -}; - -static void __init rx51_add_gpio_keys(void) -{ - platform_device_register(&rx51_gpio_keys_device); -} -#else -static void __init rx51_add_gpio_keys(void) -{ -} -#endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */ - -static uint32_t board_keymap[] = { - /* - * Note that KEY(x, 8, KEY_XXX) entries represent "entrire row - * connected to the ground" matrix state. - */ - KEY(0, 0, KEY_Q), - KEY(0, 1, KEY_O), - KEY(0, 2, KEY_P), - KEY(0, 3, KEY_COMMA), - KEY(0, 4, KEY_BACKSPACE), - KEY(0, 6, KEY_A), - KEY(0, 7, KEY_S), - - KEY(1, 0, KEY_W), - KEY(1, 1, KEY_D), - KEY(1, 2, KEY_F), - KEY(1, 3, KEY_G), - KEY(1, 4, KEY_H), - KEY(1, 5, KEY_J), - KEY(1, 6, KEY_K), - KEY(1, 7, KEY_L), - - KEY(2, 0, KEY_E), - KEY(2, 1, KEY_DOT), - KEY(2, 2, KEY_UP), - KEY(2, 3, KEY_ENTER), - KEY(2, 5, KEY_Z), - KEY(2, 6, KEY_X), - KEY(2, 7, KEY_C), - KEY(2, 8, KEY_F9), - - KEY(3, 0, KEY_R), - KEY(3, 1, KEY_V), - KEY(3, 2, KEY_B), - KEY(3, 3, KEY_N), - KEY(3, 4, KEY_M), - KEY(3, 5, KEY_SPACE), - KEY(3, 6, KEY_SPACE), - KEY(3, 7, KEY_LEFT), - - KEY(4, 0, KEY_T), - KEY(4, 1, KEY_DOWN), - KEY(4, 2, KEY_RIGHT), - KEY(4, 4, KEY_LEFTCTRL), - KEY(4, 5, KEY_RIGHTALT), - KEY(4, 6, KEY_LEFTSHIFT), - KEY(4, 8, KEY_F10), - - KEY(5, 0, KEY_Y), - KEY(5, 8, KEY_F11), - - KEY(6, 0, KEY_U), - - KEY(7, 0, KEY_I), - KEY(7, 1, KEY_F7), - KEY(7, 2, KEY_F8), -}; - -static struct matrix_keymap_data board_map_data = { - .keymap = board_keymap, - .keymap_size = ARRAY_SIZE(board_keymap), -}; - -static struct twl4030_keypad_data rx51_kp_data = { - .keymap_data = &board_map_data, - .rows = 8, - .cols = 8, - .rep = 1, -}; - -/* Enable input logic and pull all lines up when eMMC is on. */ -static struct omap_board_mux rx51_mmc2_on_mux[] = { - OMAP3_MUX(SDMMC2_CMD, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT0, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT1, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT2, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT3, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT4, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT5, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT6, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT7, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; - -/* Disable input logic and pull all lines down when eMMC is off. */ -static struct omap_board_mux rx51_mmc2_off_mux[] = { - OMAP3_MUX(SDMMC2_CMD, OMAP_PULL_ENA | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT0, OMAP_PULL_ENA | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT1, OMAP_PULL_ENA | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT2, OMAP_PULL_ENA | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT3, OMAP_PULL_ENA | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT4, OMAP_PULL_ENA | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT5, OMAP_PULL_ENA | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT6, OMAP_PULL_ENA | OMAP_MUX_MODE0), - OMAP3_MUX(SDMMC2_DAT7, OMAP_PULL_ENA | OMAP_MUX_MODE0), - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; - -static struct omap_mux_partition *partition; - -/* - * Current flows to eMMC when eMMC is off and the data lines are pulled up, - * so pull them down. N.B. we pull 8 lines because we are using 8 lines. - */ -static void rx51_mmc2_remux(struct device *dev, int power_on) -{ - if (power_on) - omap_mux_write_array(partition, rx51_mmc2_on_mux); - else - omap_mux_write_array(partition, rx51_mmc2_off_mux); -} - -static struct omap2_hsmmc_info mmc[] __initdata = { - { - .name = "external", - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .cover_only = true, - .gpio_cd = 160, - .gpio_wp = -EINVAL, - }, - { - .name = "internal", - .mmc = 2, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, - /* See also rx51_mmc2_remux */ - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - .nonremovable = true, - .remux = rx51_mmc2_remux, - }, - {} /* Terminator */ -}; - -static struct regulator_consumer_supply rx51_vmmc1_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - -static struct regulator_consumer_supply rx51_vaux2_supply[] = { - REGULATOR_SUPPLY("vdds_csib", "omap3isp"), -}; - -static struct regulator_consumer_supply rx51_vaux3_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), -}; - -static struct regulator_consumer_supply rx51_vsim_supply[] = { - REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"), -}; - -static struct regulator_consumer_supply rx51_vmmc2_supplies[] = { - /* tlv320aic3x analog supplies */ - REGULATOR_SUPPLY("AVDD", "2-0018"), - REGULATOR_SUPPLY("DRVDD", "2-0018"), - REGULATOR_SUPPLY("AVDD", "2-0019"), - REGULATOR_SUPPLY("DRVDD", "2-0019"), - /* tpa6130a2 */ - REGULATOR_SUPPLY("Vdd", "2-0060"), - /* Keep vmmc as last item. It is not iterated for newer boards */ - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), -}; - -static struct regulator_consumer_supply rx51_vio_supplies[] = { - /* tlv320aic3x digital supplies */ - REGULATOR_SUPPLY("IOVDD", "2-0018"), - REGULATOR_SUPPLY("DVDD", "2-0018"), - REGULATOR_SUPPLY("IOVDD", "2-0019"), - REGULATOR_SUPPLY("DVDD", "2-0019"), - /* Si4713 IO supply */ - REGULATOR_SUPPLY("vio", "2-0063"), - /* lis3lv02d */ - REGULATOR_SUPPLY("Vdd_IO", "3-001d"), -}; - -static struct regulator_consumer_supply rx51_vaux1_consumers[] = { - REGULATOR_SUPPLY("vdds_sdi", "omapdss"), - REGULATOR_SUPPLY("vdds_sdi", "omapdss_sdi.0"), - /* Si4713 supply */ - REGULATOR_SUPPLY("vdd", "2-0063"), - /* lis3lv02d */ - REGULATOR_SUPPLY("Vdd", "3-001d"), -}; - -static struct regulator_init_data rx51_vaux1 = { - .constraints = { - .name = "V28", - .min_uV = 2800000, - .max_uV = 2800000, - .always_on = true, /* due battery cover sensor */ - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(rx51_vaux1_consumers), - .consumer_supplies = rx51_vaux1_consumers, -}; - -static struct regulator_init_data rx51_vaux2 = { - .constraints = { - .name = "VCSI", - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(rx51_vaux2_supply), - .consumer_supplies = rx51_vaux2_supply, -}; - -/* VAUX3 - adds more power to VIO_18 rail */ -static struct regulator_init_data rx51_vaux3_cam = { - .constraints = { - .name = "VCAM_DIG_18", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -static struct regulator_init_data rx51_vaux3_mmc = { - .constraints = { - .name = "VMMC2_30", - .min_uV = 2800000, - .max_uV = 3000000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(rx51_vaux3_supply), - .consumer_supplies = rx51_vaux3_supply, -}; - -static struct regulator_init_data rx51_vaux4 = { - .constraints = { - .name = "VCAM_ANA_28", - .min_uV = 2800000, - .max_uV = 2800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -static struct regulator_init_data rx51_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(rx51_vmmc1_supply), - .consumer_supplies = rx51_vmmc1_supply, -}; - -static struct regulator_init_data rx51_vmmc2 = { - .constraints = { - .name = "V28_A", - .min_uV = 2800000, - .max_uV = 3000000, - .always_on = true, /* due VIO leak to AIC34 VDDs */ - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(rx51_vmmc2_supplies), - .consumer_supplies = rx51_vmmc2_supplies, -}; - -static struct regulator_init_data rx51_vpll1 = { - .constraints = { - .name = "VPLL", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .always_on = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE, - }, -}; - -static struct regulator_init_data rx51_vpll2 = { - .constraints = { - .name = "VSDI_CSI", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .always_on = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE, - }, -}; - -static struct regulator_init_data rx51_vsim = { - .constraints = { - .name = "VMMC2_IO_18", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(rx51_vsim_supply), - .consumer_supplies = rx51_vsim_supply, -}; - -static struct regulator_init_data rx51_vio = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(rx51_vio_supplies), - .consumer_supplies = rx51_vio_supplies, -}; - -static struct regulator_init_data rx51_vintana1 = { - .constraints = { - .name = "VINTANA1", - .min_uV = 1500000, - .max_uV = 1500000, - .always_on = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE, - }, -}; - -static struct regulator_init_data rx51_vintana2 = { - .constraints = { - .name = "VINTANA2", - .min_uV = 2750000, - .max_uV = 2750000, - .apply_uV = true, - .always_on = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE, - }, -}; - -static struct regulator_init_data rx51_vintdig = { - .constraints = { - .name = "VINTDIG", - .min_uV = 1500000, - .max_uV = 1500000, - .always_on = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE, - }, -}; - -static struct gpiod_lookup_table rx51_fmtx_gpios_table = { - .dev_id = "2-0063", - .table = { - GPIO_LOOKUP("gpio.6", 3, "reset", GPIO_ACTIVE_HIGH), /* 163 */ - { }, - }, -}; - -static __init void rx51_gpio_init(void) -{ - gpiod_add_lookup_table(&rx51_fmtx_gpios_table); -} - -static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n) -{ - /* FIXME this gpio setup is just a placeholder for now */ - gpio_request_one(gpio + 6, GPIOF_OUT_INIT_LOW, "backlight_pwm"); - gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "speaker_en"); - - return 0; -} - -static struct twl4030_gpio_platform_data rx51_gpio_data = { - .pulldowns = BIT(0) | BIT(1) | BIT(2) | BIT(3) - | BIT(4) | BIT(5) - | BIT(8) | BIT(9) | BIT(10) | BIT(11) - | BIT(12) | BIT(13) | BIT(14) | BIT(15) - | BIT(16) | BIT(17) , - .setup = rx51_twlgpio_setup, -}; - -static struct twl4030_ins sleep_on_seq[] __initdata = { -/* - * Turn off everything - */ - {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_SLEEP), 2}, -}; - -static struct twl4030_script sleep_on_script __initdata = { - .script = sleep_on_seq, - .size = ARRAY_SIZE(sleep_on_seq), - .flags = TWL4030_SLEEP_SCRIPT, -}; - -static struct twl4030_ins wakeup_seq[] __initdata = { -/* - * Reenable everything - */ - {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2}, -}; - -static struct twl4030_script wakeup_script __initdata = { - .script = wakeup_seq, - .size = ARRAY_SIZE(wakeup_seq), - .flags = TWL4030_WAKEUP12_SCRIPT, -}; - -static struct twl4030_ins wakeup_p3_seq[] __initdata = { -/* - * Reenable everything - */ - {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2}, -}; - -static struct twl4030_script wakeup_p3_script __initdata = { - .script = wakeup_p3_seq, - .size = ARRAY_SIZE(wakeup_p3_seq), - .flags = TWL4030_WAKEUP3_SCRIPT, -}; - -static struct twl4030_ins wrst_seq[] __initdata = { -/* - * Reset twl4030. - * Reset VDD1 regulator. - * Reset VDD2 regulator. - * Reset VPLL1 regulator. - * Enable sysclk output. - * Reenable twl4030. - */ - {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_OFF), 2}, - {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 0, 1, RES_STATE_ACTIVE), - 0x13}, - {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 3, RES_STATE_OFF), 0x13}, - {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD1, RES_STATE_WRST), 0x13}, - {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD2, RES_STATE_WRST), 0x13}, - {MSG_SINGULAR(DEV_GRP_NULL, RES_VPLL1, RES_STATE_WRST), 0x35}, - {MSG_SINGULAR(DEV_GRP_P3, RES_HFCLKOUT, RES_STATE_ACTIVE), 2}, - {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_ACTIVE), 2}, -}; - -static struct twl4030_script wrst_script __initdata = { - .script = wrst_seq, - .size = ARRAY_SIZE(wrst_seq), - .flags = TWL4030_WRST_SCRIPT, -}; - -static struct twl4030_script *twl4030_scripts[] __initdata = { - /* wakeup12 script should be loaded before sleep script, otherwise a - board might hit retention before loading of wakeup script is - completed. This can cause boot failures depending on timing issues. - */ - &wakeup_script, - &sleep_on_script, - &wakeup_p3_script, - &wrst_script, -}; - -static struct twl4030_resconfig twl4030_rconfig[] __initdata = { - { .resource = RES_VDD1, .devgroup = -1, - .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF, - .remap_sleep = RES_STATE_OFF - }, - { .resource = RES_VDD2, .devgroup = -1, - .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF, - .remap_sleep = RES_STATE_OFF - }, - { .resource = RES_VPLL1, .devgroup = -1, - .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF, - .remap_sleep = RES_STATE_OFF - }, - { .resource = RES_VPLL2, .devgroup = -1, - .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VAUX1, .devgroup = -1, - .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VAUX2, .devgroup = -1, - .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VAUX3, .devgroup = -1, - .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VAUX4, .devgroup = -1, - .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VMMC1, .devgroup = -1, - .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VMMC2, .devgroup = -1, - .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VDAC, .devgroup = -1, - .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VSIM, .devgroup = -1, - .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VINTANA1, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, - .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VINTANA2, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, - .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VINTDIG, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, - .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_VIO, .devgroup = DEV_GRP_P3, - .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_CLKEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, - .type = 1, .type2 = -1 , .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_REGEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, - .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_NRES_PWRON, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, - .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_SYSEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, - .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_HFCLKOUT, .devgroup = DEV_GRP_P3, - .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_32KCLKOUT, .devgroup = -1, - .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_RESET, .devgroup = -1, - .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 - }, - { .resource = RES_MAIN_REF, .devgroup = -1, - .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 - }, - { 0, 0}, -}; - -static struct twl4030_power_data rx51_t2scripts_data __initdata = { - .scripts = twl4030_scripts, - .num = ARRAY_SIZE(twl4030_scripts), - .resource_config = twl4030_rconfig, -}; - -static struct twl4030_vibra_data rx51_vibra_data __initdata = { - .coexist = 0, -}; - -static struct twl4030_audio_data rx51_audio_data __initdata = { - .audio_mclk = 26000000, - .vibra = &rx51_vibra_data, -}; - -static struct twl4030_platform_data rx51_twldata __initdata = { - /* platform_data for children goes here */ - .gpio = &rx51_gpio_data, - .keypad = &rx51_kp_data, - .power = &rx51_t2scripts_data, - .audio = &rx51_audio_data, - - .vaux1 = &rx51_vaux1, - .vaux2 = &rx51_vaux2, - .vaux4 = &rx51_vaux4, - .vmmc1 = &rx51_vmmc1, - .vpll1 = &rx51_vpll1, - .vpll2 = &rx51_vpll2, - .vsim = &rx51_vsim, - .vintana1 = &rx51_vintana1, - .vintana2 = &rx51_vintana2, - .vintdig = &rx51_vintdig, - .vio = &rx51_vio, -}; - -static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata_or_module = { - .power_gpio = 98, -}; - -/* Audio setup data */ -static struct aic3x_setup_data rx51_aic34_setup = { - .gpio_func[0] = AIC3X_GPIO1_FUNC_DISABLED, - .gpio_func[1] = AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT, -}; - -static struct aic3x_pdata rx51_aic3x_data = { - .setup = &rx51_aic34_setup, - .gpio_reset = 60, -}; - -static struct aic3x_pdata rx51_aic3x_data2 = { - .gpio_reset = 60, -}; - -#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713) -static struct si4713_platform_data rx51_si4713_platform_data = { - .is_platform_device = true -}; -#endif - -static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = { -#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713) - { - I2C_BOARD_INFO("si4713", 0x63), - .platform_data = &rx51_si4713_platform_data, - }, -#endif - { - I2C_BOARD_INFO("tlv320aic3x", 0x18), - .platform_data = &rx51_aic3x_data, - }, - { - I2C_BOARD_INFO("tlv320aic3x", 0x19), - .platform_data = &rx51_aic3x_data2, - }, -#if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE) - { - I2C_BOARD_INFO("tsl2563", 0x29), - .platform_data = &rx51_tsl2563_platform_data, - }, -#endif -#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE) - { - I2C_BOARD_INFO("lp5523", 0x32), - .platform_data = &rx51_lp5523_platform_data, - }, -#endif - { - I2C_BOARD_INFO("bq27200", 0x55), - }, - { - I2C_BOARD_INFO("tpa6130a2", 0x60), - .platform_data = &rx51_tpa6130a2_data, - } -}; - -static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = { -#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) - { - I2C_BOARD_INFO("lis3lv02d", 0x1d), - .platform_data = &rx51_lis3lv02d_data, - }, -#endif -}; - -static int __init rx51_i2c_init(void) -{ -#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713) - int err; -#endif - - if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) || - system_rev >= SYSTEM_REV_B_USES_VAUX3) { - rx51_twldata.vaux3 = &rx51_vaux3_mmc; - /* Only older boards use VMMC2 for internal MMC */ - rx51_vmmc2.num_consumer_supplies--; - } else { - rx51_twldata.vaux3 = &rx51_vaux3_cam; - } - rx51_twldata.vmmc2 = &rx51_vmmc2; - omap3_pmic_get_config(&rx51_twldata, - TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, - TWL_COMMON_REGULATOR_VDAC); - - rx51_twldata.vdac->constraints.apply_uV = true; - rx51_twldata.vdac->constraints.name = "VDAC"; - - omap_pmic_init(1, 2200, "twl5030", 7 + OMAP_INTC_START, &rx51_twldata); -#if IS_ENABLED(CONFIG_I2C_SI4713) && IS_ENABLED(CONFIG_PLATFORM_SI4713) - err = gpio_request_one(RX51_FMTX_IRQ, GPIOF_DIR_IN, "si4713 irq"); - if (err) { - printk(KERN_ERR "Cannot request si4713 irq gpio. %d\n", err); - return err; - } - rx51_peripherals_i2c_board_info_2[0].irq = gpio_to_irq(RX51_FMTX_IRQ); -#endif - omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, - ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); -#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) - rx51_lis3lv02d_data.irq2 = gpio_to_irq(LIS302_IRQ2_GPIO); - rx51_peripherals_i2c_board_info_3[0].irq = gpio_to_irq(LIS302_IRQ1_GPIO); -#endif - omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3, - ARRAY_SIZE(rx51_peripherals_i2c_board_info_3)); - return 0; -} - -#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ - defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) - -static struct mtd_partition onenand_partitions[] = { - { - .name = "bootloader", - .offset = 0, - .size = 0x20000, - .mask_flags = MTD_WRITEABLE, /* Force read-only */ - }, - { - .name = "config", - .offset = MTDPART_OFS_APPEND, - .size = 0x60000, - }, - { - .name = "log", - .offset = MTDPART_OFS_APPEND, - .size = 0x40000, - }, - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = 0x200000, - }, - { - .name = "initfs", - .offset = MTDPART_OFS_APPEND, - .size = 0x200000, - }, - { - .name = "rootfs", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct omap_onenand_platform_data board_onenand_data[] = { - { - .cs = 0, - .gpio_irq = 65, - .parts = onenand_partitions, - .nr_parts = ARRAY_SIZE(onenand_partitions), - .flags = ONENAND_SYNC_READWRITE, - } -}; -#endif - -static struct gpio rx51_wl1251_gpios[] __initdata = { - { RX51_WL1251_IRQ_GPIO, GPIOF_IN, "wl1251 irq" }, -}; - -static void __init rx51_init_wl1251(void) -{ - int irq, ret; - - ret = gpio_request_array(rx51_wl1251_gpios, - ARRAY_SIZE(rx51_wl1251_gpios)); - if (ret < 0) - goto error; - - irq = gpio_to_irq(RX51_WL1251_IRQ_GPIO); - if (irq < 0) - goto err_irq; - - wl1251_pdata.power_gpio = RX51_WL1251_POWER_GPIO; - rx51_peripherals_spi_board_info[RX51_SPI_WL1251].irq = irq; - - return; - -err_irq: - gpio_free(RX51_WL1251_IRQ_GPIO); -error: - printk(KERN_ERR "wl1251 board initialisation failed\n"); - wl1251_pdata.power_gpio = -1; - - /* - * Now rx51_peripherals_spi_board_info[1].irq is zero and - * set_power is null, and wl1251_probe() will fail. - */ -} - -static struct tsc2005_platform_data tsc2005_pdata = { - .ts_pressure_max = 2048, - .ts_pressure_fudge = 2, - .ts_x_max = 4096, - .ts_x_fudge = 4, - .ts_y_max = 4096, - .ts_y_fudge = 7, - .ts_x_plate_ohm = 280, - .esd_timeout_ms = 8000, -}; - -static struct gpio rx51_tsc2005_gpios[] __initdata = { - { RX51_TSC2005_IRQ_GPIO, GPIOF_IN, "tsc2005 IRQ" }, - { RX51_TSC2005_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "tsc2005 reset" }, -}; - -static void rx51_tsc2005_set_reset(bool enable) -{ - gpio_set_value(RX51_TSC2005_RESET_GPIO, enable); -} - -static void __init rx51_init_tsc2005(void) -{ - int r; - - omap_mux_init_gpio(RX51_TSC2005_RESET_GPIO, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(RX51_TSC2005_IRQ_GPIO, OMAP_PIN_INPUT_PULLUP); - - r = gpio_request_array(rx51_tsc2005_gpios, - ARRAY_SIZE(rx51_tsc2005_gpios)); - if (r < 0) { - printk(KERN_ERR "tsc2005 board initialization failed\n"); - tsc2005_pdata.esd_timeout_ms = 0; - return; - } - - tsc2005_pdata.set_reset = rx51_tsc2005_set_reset; - rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq = - gpio_to_irq(RX51_TSC2005_IRQ_GPIO); -} - -#if IS_ENABLED(CONFIG_OMAP_DM_TIMER) -static struct pwm_omap_dmtimer_pdata __maybe_unused pwm_dmtimer_pdata = { - .request_by_node = omap_dm_timer_request_by_node, - .request_specific = omap_dm_timer_request_specific, - .request = omap_dm_timer_request, - .set_source = omap_dm_timer_set_source, - .get_irq = omap_dm_timer_get_irq, - .set_int_enable = omap_dm_timer_set_int_enable, - .set_int_disable = omap_dm_timer_set_int_disable, - .free = omap_dm_timer_free, - .enable = omap_dm_timer_enable, - .disable = omap_dm_timer_disable, - .get_fclk = omap_dm_timer_get_fclk, - .start = omap_dm_timer_start, - .stop = omap_dm_timer_stop, - .set_load = omap_dm_timer_set_load, - .set_match = omap_dm_timer_set_match, - .set_pwm = omap_dm_timer_set_pwm, - .set_prescaler = omap_dm_timer_set_prescaler, - .read_counter = omap_dm_timer_read_counter, - .write_counter = omap_dm_timer_write_counter, - .read_status = omap_dm_timer_read_status, - .write_status = omap_dm_timer_write_status, -}; -#endif - -#if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE) -static struct lirc_rx51_platform_data rx51_lirc_data = { - .set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat, -}; - -static struct platform_device rx51_lirc_device = { - .name = "lirc_rx51", - .id = -1, - .dev = { - .platform_data = &rx51_lirc_data, - }, -}; - -static void __init rx51_init_lirc(void) -{ - platform_device_register(&rx51_lirc_device); -} -#else -static void __init rx51_init_lirc(void) -{ -} -#endif - -static struct platform_device madc_hwmon = { - .name = "twl4030_madc_hwmon", - .id = -1, -}; - -static void __init rx51_init_twl4030_hwmon(void) -{ - platform_device_register(&madc_hwmon); -} - -static struct platform_device omap3_rom_rng_device = { - .name = "omap3-rom-rng", - .id = -1, - .dev = { - .platform_data = rx51_secure_rng_call, - }, -}; - -static void __init rx51_init_omap3_rom_rng(void) -{ - if (omap_type() == OMAP2_DEVICE_TYPE_SEC) { - pr_info("RX-51: Registering OMAP3 HWRNG device\n"); - platform_device_register(&omap3_rom_rng_device); - } -} - -void __init rx51_peripherals_init(void) -{ - rx51_gpio_init(); - rx51_i2c_init(); - regulator_has_full_constraints(); - gpmc_onenand_init(board_onenand_data); - rx51_add_gpio_keys(); - rx51_init_wl1251(); - rx51_init_tsc2005(); - rx51_init_lirc(); - spi_register_board_info(rx51_peripherals_spi_board_info, - ARRAY_SIZE(rx51_peripherals_spi_board_info)); - - partition = omap_mux_get("core"); - if (partition) - omap_hsmmc_init(mmc); - - rx51_charger_init(); - rx51_init_twl4030_hwmon(); - rx51_init_omap3_rom_rng(); -} - diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c deleted file mode 100644 index 180c6aa633bd..000000000000 --- a/arch/arm/mach-omap2/board-rx51-video.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/board-rx51-video.c - * - * Copyright (C) 2010 Nokia - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/spi/spi.h> -#include <linux/mm.h> -#include <asm/mach-types.h> -#include <linux/platform_data/omapdss.h> -#include <video/omap-panel-data.h> - -#include <linux/platform_data/spi-omap2-mcspi.h> - -#include "soc.h" -#include "board-rx51.h" -#include "display.h" - -#include "mux.h" - -#define RX51_LCD_RESET_GPIO 90 - -#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) - -static struct connector_atv_platform_data rx51_tv_pdata = { - .name = "tv", - .source = "venc.0", - .invert_polarity = false, -}; - -static struct platform_device rx51_tv_connector_device = { - .name = "connector-analog-tv", - .id = 0, - .dev.platform_data = &rx51_tv_pdata, -}; - -static struct omap_dss_board_info rx51_dss_board_info = { - .default_display_name = "lcd", -}; - -static int __init rx51_video_init(void) -{ - if (!machine_is_nokia_rx51()) - return 0; - - if (omap_mux_init_gpio(RX51_LCD_RESET_GPIO, OMAP_PIN_OUTPUT)) { - pr_err("%s cannot configure MUX for LCD RESET\n", __func__); - return 0; - } - - omap_display_init(&rx51_dss_board_info); - - platform_device_register(&rx51_tv_connector_device); - - return 0; -} - -omap_subsys_initcall(rx51_video_init); -#endif /* defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) */ diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c deleted file mode 100644 index 41161ca97d74..000000000000 --- a/arch/arm/mach-omap2/board-rx51.c +++ /dev/null @@ -1,141 +0,0 @@ -/* - * Board support file for Nokia N900 (aka RX-51). - * - * Copyright (C) 2007, 2008 Nokia - * Copyright (C) 2012 Ivaylo Dimitrov <freemangordon@abv.bg> - * Copyright (C) 2013 Pali Rohár <pali.rohar@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/leds.h> -#include <linux/usb/phy.h> -#include <linux/usb/musb.h> -#include <linux/platform_data/spi-omap2-mcspi.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <linux/omap-dma.h> - -#include "common.h" -#include "mux.h" -#include "gpmc.h" -#include "pm.h" -#include "soc.h" -#include "sdram-nokia.h" -#include "omap-secure.h" - -#define RX51_GPIO_SLEEP_IND 162 - -static struct gpio_led gpio_leds[] = { - { - .name = "sleep_ind", - .gpio = RX51_GPIO_SLEEP_IND, - }, -}; - -static struct gpio_led_platform_data gpio_led_info = { - .leds = gpio_leds, - .num_leds = ARRAY_SIZE(gpio_leds), -}; - -static struct platform_device leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &gpio_led_info, - }, -}; - -/* - * cpuidle C-states definition for rx51. - * - * The 'exit_latency' field is the sum of sleep - * and wake-up latencies. - - --------------------------------------------- - | state | exit_latency | target_residency | - --------------------------------------------- - | C1 | 110 + 162 | 5 | - | C2 | 106 + 180 | 309 | - | C3 | 107 + 410 | 46057 | - | C4 | 121 + 3374 | 46057 | - | C5 | 855 + 1146 | 46057 | - | C6 | 7580 + 4134 | 484329 | - | C7 | 7505 + 15274 | 484329 | - --------------------------------------------- - -*/ - -extern void __init rx51_peripherals_init(void); - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 0, -}; - -static void __init rx51_init(void) -{ - struct omap_sdrc_params *sdrc_params; - - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - omap_serial_init(); - - sdrc_params = nokia_get_sdram_timings(); - omap_sdrc_init(sdrc_params, sdrc_params); - - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); - usb_musb_init(&musb_board_data); - rx51_peripherals_init(); - - if (omap_type() == OMAP2_DEVICE_TYPE_SEC) { -#ifdef CONFIG_ARM_ERRATA_430973 - pr_info("RX-51: Enabling ARM errata 430973 workaround\n"); - /* set IBE to 1 */ - rx51_secure_update_aux_cr(BIT(6), 0); -#endif - } - - /* Ensure SDRC pins are mux'd for self-refresh */ - omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); - omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); - - platform_device_register(&leds_gpio); -} - -static void __init rx51_reserve(void) -{ - omap_reserve(); -} - -MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") - /* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */ - .atag_offset = 0x100, - .reserve = rx51_reserve, - .map_io = omap3_map_io, - .init_early = omap3430_init_early, - .init_irq = omap3_init_irq, - .init_machine = rx51_init, - .init_late = omap3430_init_late, - .init_time = omap_init_time, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-rx51.h b/arch/arm/mach-omap2/board-rx51.h deleted file mode 100644 index b76f49e7eed5..000000000000 --- a/arch/arm/mach-omap2/board-rx51.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * Defines for rx51 boards - */ - -#ifndef _OMAP_BOARD_RX51_H -#define _OMAP_BOARD_RX51_H - -extern void __init rx51_peripherals_init(void); -extern void __init rx51_video_mem_init(void); - -#endif diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c index c073fb57dd13..6f2d0aec0513 100644 --- a/arch/arm/mach-omap2/cm33xx.c +++ b/arch/arm/mach-omap2/cm33xx.c @@ -220,9 +220,6 @@ static int am33xx_cm_wait_module_ready(u8 part, s16 inst, u16 clkctrl_offs, { int i = 0; - if (!clkctrl_offs) - return 0; - omap_test_timeout(_is_module_ready(inst, clkctrl_offs), MAX_MODULE_READY_TIME, i); @@ -246,9 +243,6 @@ static int am33xx_cm_wait_module_idle(u8 part, s16 inst, u16 clkctrl_offs, { int i = 0; - if (!clkctrl_offs) - return 0; - omap_test_timeout((_clkctrl_idlest(inst, clkctrl_offs) == CLKCTRL_IDLEST_DISABLED), MAX_MODULE_READY_TIME, i); diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c index 2c0e07ed6b99..2ab27ade136a 100644 --- a/arch/arm/mach-omap2/cminst44xx.c +++ b/arch/arm/mach-omap2/cminst44xx.c @@ -278,9 +278,6 @@ static int omap4_cminst_wait_module_ready(u8 part, s16 inst, u16 clkctrl_offs, { int i = 0; - if (!clkctrl_offs) - return 0; - omap_test_timeout(_is_module_ready(part, inst, clkctrl_offs), MAX_MODULE_READY_TIME, i); @@ -304,9 +301,6 @@ static int omap4_cminst_wait_module_idle(u8 part, s16 inst, u16 clkctrl_offs, { int i = 0; - if (!clkctrl_offs) - return 0; - omap_test_timeout((_clkctrl_idlest(part, inst, clkctrl_offs) == CLKCTRL_IDLEST_DISABLED), MAX_MODULE_DISABLE_TIME, i); diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index d246efd9f734..5388fcd3de72 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -29,8 +29,7 @@ #include "common.h" #include "common-board-devices.h" -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ - defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) +#if IS_ENABLED(CONFIG_TOUCHSCREEN_ADS7846) static struct omap2_mcspi_device_config ads7846_mcspi_config = { .turbo_mode = 0, }; diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index d7f1d69daf6d..60a20f3b44de 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -67,7 +67,7 @@ omap_postcore_initcall(omap3_l3_init); static inline void omap_init_sti(void) {} -#if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE) +#if IS_ENABLED(CONFIG_SPI_OMAP24XX) #include <linux/platform_data/spi-omap2-mcspi.h> @@ -163,9 +163,8 @@ static void __init omap_init_aes(void) /*-------------------------------------------------------------------------*/ -#if defined(CONFIG_VIDEO_OMAP2_VOUT) || \ - defined(CONFIG_VIDEO_OMAP2_VOUT_MODULE) -#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) +#if IS_ENABLED(CONFIG_VIDEO_OMAP2_VOUT) +#if IS_ENABLED(CONFIG_FB_OMAP2) static struct resource omap_vout_resource[3 - CONFIG_FB_OMAP2_NUM_FBS] = { }; #else diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c index facd7406a03d..44fef961bb70 100644 --- a/arch/arm/mach-omap2/drm.c +++ b/arch/arm/mach-omap2/drm.c @@ -28,7 +28,7 @@ #include "soc.h" #include "display.h" -#if defined(CONFIG_DRM_OMAP) || defined(CONFIG_DRM_OMAP_MODULE) +#if IS_ENABLED(CONFIG_DRM_OMAP) static struct omap_drm_platform_data platform_data; diff --git a/arch/arm/mach-omap2/fb.c b/arch/arm/mach-omap2/fb.c index 1f1ecf8807eb..ecd00b63181e 100644 --- a/arch/arm/mach-omap2/fb.c +++ b/arch/arm/mach-omap2/fb.c @@ -90,7 +90,7 @@ int __init omap_init_vrfb(void) int __init omap_init_vrfb(void) { return 0; } #endif -#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) +#if IS_ENABLED(CONFIG_FB_OMAP2) static u64 omap_fb_dma_mask = ~(u32)0; static struct omapfb_platform_data omapfb_config; diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.h b/arch/arm/mach-omap2/gpmc-smsc911x.h index ea6c9c88c725..99a05b8412fa 100644 --- a/arch/arm/mach-omap2/gpmc-smsc911x.h +++ b/arch/arm/mach-omap2/gpmc-smsc911x.h @@ -21,7 +21,7 @@ struct omap_smsc911x_platform_data { u32 flags; }; -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) extern void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d); diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index cff079e563f4..478097741bce 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -26,7 +26,7 @@ #include "hsmmc.h" #include "control.h" -#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) +#if IS_ENABLED(CONFIG_MMC_OMAP_HS) static u16 control_pbias_offset; static u16 control_devconf1_offset; diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h index 148cd9b15499..69b619ddc765 100644 --- a/arch/arm/mach-omap2/hsmmc.h +++ b/arch/arm/mach-omap2/hsmmc.h @@ -28,7 +28,7 @@ struct omap2_hsmmc_info { void (*init_card)(struct mmc_card *card); }; -#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) +#if IS_ENABLED(CONFIG_MMC_OMAP_HS) void omap_hsmmc_init(struct omap2_hsmmc_info *); void omap_hsmmc_late_init(struct omap2_hsmmc_info *); diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index 0c4754386532..369f95a703ac 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -322,34 +322,25 @@ static void irq_save_secure_context(void) #endif #ifdef CONFIG_HOTPLUG_CPU -static int irq_cpu_hotplug_notify(struct notifier_block *self, - unsigned long action, void *hcpu) +static int omap_wakeupgen_cpu_online(unsigned int cpu) { - unsigned int cpu = (unsigned int)hcpu; - - /* - * Corresponding FROZEN transitions do not have to be handled, - * they are handled by at a higher level - * (drivers/cpuidle/coupled.c). - */ - switch (action) { - case CPU_ONLINE: - wakeupgen_irqmask_all(cpu, 0); - break; - case CPU_DEAD: - wakeupgen_irqmask_all(cpu, 1); - break; - } - return NOTIFY_OK; + wakeupgen_irqmask_all(cpu, 0); + return 0; } -static struct notifier_block irq_hotplug_notifier = { - .notifier_call = irq_cpu_hotplug_notify, -}; +static int omap_wakeupgen_cpu_dead(unsigned int cpu) +{ + wakeupgen_irqmask_all(cpu, 1); + return 0; +} static void __init irq_hotplug_init(void) { - register_hotcpu_notifier(&irq_hotplug_notifier); + cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN, "arm/omap-wake:online", + omap_wakeupgen_cpu_online, NULL); + cpuhp_setup_state_nocalls(CPUHP_ARM_OMAP_WAKE_DEAD, + "arm/omap-wake:dead", NULL, + omap_wakeupgen_cpu_dead); } #else static void __init irq_hotplug_init(void) diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 5b709383381c..1052b29697b8 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1053,6 +1053,10 @@ static int _omap4_wait_target_disable(struct omap_hwmod *oh) if (oh->flags & HWMOD_NO_IDLEST) return 0; + if (!oh->prcm.omap4.clkctrl_offs && + !(oh->prcm.omap4.flags & HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET)) + return 0; + return omap_cm_wait_module_idle(oh->clkdm->prcm_partition, oh->clkdm->cm_inst, oh->prcm.omap4.clkctrl_offs, 0); @@ -2971,6 +2975,10 @@ static int _omap4_wait_target_ready(struct omap_hwmod *oh) if (!_find_mpu_rt_port(oh)) return 0; + if (!oh->prcm.omap4.clkctrl_offs && + !(oh->prcm.omap4.flags & HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET)) + return 0; + /* XXX check module SIDLEMODE, hardreset status */ return omap_cm_wait_module_ready(oh->clkdm->prcm_partition, diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 4041bad79a9a..78904017f18c 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -443,8 +443,12 @@ struct omap_hwmod_omap2_prcm { * HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT: Some IP blocks don't have a PRCM * module-level context loss register associated with them; this * flag bit should be set in those cases + * HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET: Some IP blocks have a valid CLKCTRL + * offset of zero; this flag bit should be set in those cases to + * distinguish from hwmods that have no clkctrl offset. */ #define HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT (1 << 0) +#define HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET (1 << 1) /** * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c index 55c5878577f4..e2d84aa7f595 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c @@ -29,6 +29,7 @@ #define CLKCTRL(oh, clkctrl) ((oh).prcm.omap4.clkctrl_offs = (clkctrl)) #define RSTCTRL(oh, rstctrl) ((oh).prcm.omap4.rstctrl_offs = (rstctrl)) #define RSTST(oh, rstst) ((oh).prcm.omap4.rstst_offs = (rstst)) +#define PRCM_FLAGS(oh, flag) ((oh).prcm.omap4.flags = (flag)) /* * 'l3' class @@ -1296,6 +1297,7 @@ static void omap_hwmod_am33xx_clkctrl(void) CLKCTRL(am33xx_i2c1_hwmod, AM33XX_CM_WKUP_I2C0_CLKCTRL_OFFSET); CLKCTRL(am33xx_wd_timer1_hwmod, AM33XX_CM_WKUP_WDT1_CLKCTRL_OFFSET); CLKCTRL(am33xx_rtc_hwmod, AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET); + PRCM_FLAGS(am33xx_rtc_hwmod, HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET); CLKCTRL(am33xx_mmc2_hwmod, AM33XX_CM_PER_MMC2_CLKCTRL_OFFSET); CLKCTRL(am33xx_gpmc_hwmod, AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET); CLKCTRL(am33xx_l4_ls_hwmod, AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET); diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index d72ee6185d5e..1cc4a6f3954e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -722,8 +722,20 @@ static struct omap_hwmod omap3xxx_dss_dispc_hwmod = { * display serial interface controller */ +static struct omap_hwmod_class_sysconfig omap3xxx_dsi_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + static struct omap_hwmod_class omap3xxx_dsi_hwmod_class = { .name = "dsi", + .sysc = &omap3xxx_dsi_sysc, }; static struct omap_hwmod_irq_info omap3xxx_dsi1_irqs[] = { diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 292eca0e78ed..a72738eab009 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -532,8 +532,7 @@ void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, } #endif /* CONFIG_ARCH_OMAP4 */ -#if defined(CONFIG_SND_OMAP_SOC_OMAP_TWL4030) || \ - defined(CONFIG_SND_OMAP_SOC_OMAP_TWL4030_MODULE) +#if IS_ENABLED(CONFIG_SND_OMAP_SOC_OMAP_TWL4030) #include <linux/platform_data/omap-twl4030.h> /* Commonly used configuration */ diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index 4a2f9aba93ea..66184f5cbe40 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -24,10 +24,10 @@ #include <linux/input.h> #include <linux/input/navpoint.h> #include <linux/lcd.h> -#include <linux/mfd/htc-egpio.h> #include <linux/mfd/asic3.h> #include <linux/mtd/physmap.h> #include <linux/pda_power.h> +#include <linux/platform_data/gpio-htc-egpio.h> #include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/regulator/driver.h> diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index c410d84b243d..66070acaa888 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -83,7 +83,8 @@ static struct resource smc91x_resources[] = { }; static struct smc91x_platdata smc91x_platdata = { - .flags = SMC91X_USE_32BIT | SMC91X_USE_DMA | SMC91X_NOWAIT, + .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT | + SMC91X_USE_DMA | SMC91X_NOWAIT, }; static struct platform_device smc91x_device = { diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 7245f3359564..d6159f8ef0c2 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -137,6 +137,18 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = { // no D+ pullup; lubbock can't connect/disconnect in software }; +static void lubbock_init_pcmcia(void) +{ + struct clk *clk; + + /* Add an alias for the SA1111 PCMCIA clock */ + clk = clk_get_sys("pxa2xx-pcmcia", NULL); + if (!IS_ERR(clk)) { + clkdev_create(clk, NULL, "1800"); + clk_put(clk); + } +} + static struct resource sa1111_resources[] = { [0] = { .start = 0x10000000, @@ -467,6 +479,8 @@ static void __init lubbock_init(void) pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); + lubbock_init_pcmcia(); + clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL); pxa_set_udc_info(&udc_info); pxa_set_fb_info(NULL, &sharp_lm8v31); diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 6f8837ebbf91..b413e36506af 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -20,10 +20,10 @@ #include <linux/gpio.h> #include <linux/gpio_keys.h> #include <linux/input.h> -#include <linux/mfd/htc-egpio.h> #include <linux/mfd/htc-pasic3.h> #include <linux/mtd/physmap.h> #include <linux/pda_power.h> +#include <linux/platform_data/gpio-htc-egpio.h> #include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/regulator/driver.h> diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c index 3f06cd90567a..056369ef250e 100644 --- a/arch/arm/mach-pxa/xcep.c +++ b/arch/arm/mach-pxa/xcep.c @@ -120,7 +120,8 @@ static struct resource smc91x_resources[] = { }; static struct smc91x_platdata xcep_smc91x_info = { - .flags = SMC91X_USE_32BIT | SMC91X_NOWAIT | SMC91X_USE_DMA, + .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT | + SMC91X_NOWAIT | SMC91X_USE_DMA, }; static struct platform_device smc91x_device = { diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index 70ab4a25a5f8..1d7c83e73ffb 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -2,34 +2,29 @@ menuconfig ARCH_REALVIEW bool "ARM Ltd. RealView family" depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7 select ARM_AMBA + select ARM_GIC select ARM_TIMER_SP804 + select CLK_SP810 select COMMON_CLK_VERSATILE select GPIO_PL061 if GPIOLIB - select ICST - select PLAT_VERSATILE - select PLAT_VERSATILE_SCHED_CLOCK - help - This enables support for ARM Ltd RealView boards. - -if ARCH_REALVIEW - -config REALVIEW_DT - bool "Support RealView(R) Device Tree based boot" - select ARM_GIC - select CLK_SP810 - select HAVE_SMP + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if SMP + select HAVE_PATA_PLATFORM + select HAVE_TCM select ICST select MACH_REALVIEW_EB if ARCH_MULTI_V5 select MFD_SYSCON + select PLAT_VERSATILE + select PLAT_VERSATILE_SCHED_CLOCK select POWER_RESET select POWER_RESET_VERSATILE select POWER_SUPPLY - select SMP_ON_UP if SMP select SOC_REALVIEW select USE_OF help - Include support for booting the ARM(R) RealView(R) evaluation - boards using a device tree machine description. + This enables support for ARM Ltd RealView boards. + +if ARCH_REALVIEW config MACH_REALVIEW_EB bool "Support RealView(R) Emulation Baseboard" @@ -60,8 +55,6 @@ config REALVIEW_EB_ARM1176 config REALVIEW_EB_A9MP bool "Support Multicore Cortex-A9 Tile" depends on MACH_REALVIEW_EB && ARCH_MULTI_V7 - select HAVE_ARM_SCU if SMP - select HAVE_ARM_TWD if SMP select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 help @@ -71,30 +64,15 @@ config REALVIEW_EB_A9MP config REALVIEW_EB_ARM11MP bool "Support ARM11MPCore Tile" depends on MACH_REALVIEW_EB && ARCH_MULTI_V6 - select HAVE_ARM_SCU if SMP - select HAVE_ARM_TWD if SMP select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 help Enable support for the ARM11MPCore tile fitted to the Realview(R) Emulation Baseboard platform. -config REALVIEW_EB_ARM11MP_REVB - bool "Support ARM11MPCore RevB Tile" - depends on REALVIEW_EB_ARM11MP && ARCH_MULTI_V6 - help - Enable support for the ARM11MPCore Revision B tile on the - Realview(R) Emulation Baseboard platform. Since there are device - address differences, a kernel built with this option enabled is - not compatible with other revisions of the ARM11MPCore tile. - config MACH_REALVIEW_PB11MP bool "Support RealView(R) Platform Baseboard for ARM11MPCore" depends on ARCH_MULTI_V6 - select ARM_GIC - select HAVE_ARM_SCU if SMP - select HAVE_ARM_TWD if SMP - select HAVE_PATA_PLATFORM select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 help @@ -106,7 +84,6 @@ config MACH_REALVIEW_PB11MP config MACH_REALVIEW_PB1176 bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S" depends on ARCH_MULTI_V6 - select ARM_GIC select CPU_V6 select HAVE_TCM select MIGHT_HAVE_CACHE_L2X0 @@ -114,20 +91,9 @@ config MACH_REALVIEW_PB1176 Include support for the ARM(R) RealView(R) Platform Baseboard for ARM1176JZF-S. -config REALVIEW_PB1176_SECURE_FLASH - bool "Allow access to the secure flash memory block" - depends on MACH_REALVIEW_PB1176 - default n - help - Select this option if Linux will only run in secure mode on the - RealView PB1176 platform and access to the secure flash memory - block (64MB @ 0x3c000000) is required. - config MACH_REALVIEW_PBA8 bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform" depends on ARCH_MULTI_V7 - select ARM_GIC - select HAVE_PATA_PLATFORM help Include support for the ARM(R) RealView Platform Baseboard for Cortex(tm)-A8. This platform has an on-board Cortex-A8 and has @@ -136,10 +102,6 @@ config MACH_REALVIEW_PBA8 config MACH_REALVIEW_PBX bool "Support RealView(R) Platform Baseboard Explore for Cortex-A9" depends on ARCH_MULTI_V7 - select ARM_GIC - select HAVE_ARM_SCU if SMP - select HAVE_ARM_TWD if SMP - select HAVE_PATA_PLATFORM select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 select ZONE_DMA @@ -147,16 +109,4 @@ config MACH_REALVIEW_PBX Include support for the ARM(R) RealView(R) Platform Baseboard Explore. -config REALVIEW_HIGH_PHYS_OFFSET - bool "High physical base address for the RealView platform" - depends on MMU && !MACH_REALVIEW_PB1176 - default y - help - RealView boards other than PB1176 have the RAM available at - 0x70000000, 256MB of which being mirrored at 0x00000000. If - the board supports 512MB of RAM, this option allows the - memory to be accessed contiguously at the high physical - offset. On the PBX board, disabling this option allows 1GB of - RAM to be used with HIGHMEM. - endif diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile index 404882130956..adf39ad71cc3 100644 --- a/arch/arm/mach-realview/Makefile +++ b/arch/arm/mach-realview/Makefile @@ -3,16 +3,6 @@ # ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-versatile/include -obj-y := core.o -obj-$(CONFIG_REALVIEW_DT) += realview-dt.o +obj-y += realview-dt.o obj-$(CONFIG_SMP) += platsmp-dt.o - -ifdef CONFIG_ATAGS -obj-$(CONFIG_MACH_REALVIEW_EB) += realview_eb.o -obj-$(CONFIG_MACH_REALVIEW_PB11MP) += realview_pb11mp.o -obj-$(CONFIG_MACH_REALVIEW_PB1176) += realview_pb1176.o -obj-$(CONFIG_MACH_REALVIEW_PBA8) += realview_pba8.o -obj-$(CONFIG_MACH_REALVIEW_PBX) += realview_pbx.o -obj-$(CONFIG_SMP) += platsmp.o -endif obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-realview/board-eb.h b/arch/arm/mach-realview/board-eb.h deleted file mode 100644 index a850ae6945b0..000000000000 --- a/arch/arm/mach-realview/board-eb.h +++ /dev/null @@ -1,94 +0,0 @@ -/* - * Copyright (C) 2007 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_BOARD_EB_H -#define __ASM_ARCH_BOARD_EB_H - -#include "platform.h" - -/* - * RealView EB + ARM11MPCore peripheral addresses - */ -#define REALVIEW_EB_UART0_BASE 0x10009000 /* UART 0 */ -#define REALVIEW_EB_UART1_BASE 0x1000A000 /* UART 1 */ -#define REALVIEW_EB_UART2_BASE 0x1000B000 /* UART 2 */ -#define REALVIEW_EB_UART3_BASE 0x1000C000 /* UART 3 */ -#define REALVIEW_EB_SSP_BASE 0x1000D000 /* Synchronous Serial Port */ -#define REALVIEW_EB_WATCHDOG_BASE 0x10010000 /* watchdog interface */ -#define REALVIEW_EB_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */ -#define REALVIEW_EB_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */ -#define REALVIEW_EB_GPIO0_BASE 0x10013000 /* GPIO port 0 */ -#define REALVIEW_EB_RTC_BASE 0x10017000 /* Real Time Clock */ -#define REALVIEW_EB_CLCD_BASE 0x10020000 /* CLCD */ -#define REALVIEW_EB_GIC_CPU_BASE 0x10040000 /* Generic interrupt controller CPU interface */ -#define REALVIEW_EB_GIC_DIST_BASE 0x10041000 /* Generic interrupt controller distributor */ -#define REALVIEW_EB_SMC_BASE 0x10080000 /* Static memory controller */ - -#define REALVIEW_EB_FLASH_BASE 0x40000000 -#define REALVIEW_EB_FLASH_SIZE SZ_64M -#define REALVIEW_EB_ETH_BASE 0x4E000000 /* Ethernet */ -#define REALVIEW_EB_USB_BASE 0x4F000000 /* USB */ - -#ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB -#define REALVIEW_EB11MP_PRIV_MEM_BASE 0x10100000 -#define REALVIEW_EB11MP_L220_BASE 0x10102000 /* L220 registers */ -#define REALVIEW_EB11MP_SYS_PLD_CTRL1 0xD8 /* Register offset for MPCore sysctl */ -#else -#define REALVIEW_EB11MP_PRIV_MEM_BASE 0x1F000000 -#define REALVIEW_EB11MP_L220_BASE 0x1F002000 /* L220 registers */ -#define REALVIEW_EB11MP_SYS_PLD_CTRL1 0x74 /* Register offset for MPCore sysctl */ -#endif - -#define REALVIEW_EB11MP_PRIV_MEM_SIZE SZ_8K -#define REALVIEW_EB11MP_PRIV_MEM_OFF(x) (REALVIEW_EB11MP_PRIV_MEM_BASE + (x)) - -#define REALVIEW_EB11MP_SCU_BASE REALVIEW_EB11MP_PRIV_MEM_OFF(0) /* SCU registers */ -#define REALVIEW_EB11MP_GIC_CPU_BASE REALVIEW_EB11MP_PRIV_MEM_OFF(0x0100) /* Generic interrupt controller CPU interface */ -#define REALVIEW_EB11MP_TWD_BASE REALVIEW_EB11MP_PRIV_MEM_OFF(0x0600) -#define REALVIEW_EB11MP_GIC_DIST_BASE REALVIEW_EB11MP_PRIV_MEM_OFF(0x1000) /* Generic interrupt controller distributor */ - -/* - * Core tile identification (REALVIEW_SYS_PROCID) - */ -#define REALVIEW_EB_PROC_MASK 0xFF000000 -#define REALVIEW_EB_PROC_ARM7TDMI 0x00000000 -#define REALVIEW_EB_PROC_ARM9 0x02000000 -#define REALVIEW_EB_PROC_ARM11 0x04000000 -#define REALVIEW_EB_PROC_ARM11MP 0x06000000 -#define REALVIEW_EB_PROC_A9MP 0x0C000000 - -#define check_eb_proc(proc_type) \ - ((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_EB_PROC_MASK) \ - == proc_type) - -#ifdef CONFIG_REALVIEW_EB_ARM11MP -#define core_tile_eb11mp() check_eb_proc(REALVIEW_EB_PROC_ARM11MP) -#else -#define core_tile_eb11mp() 0 -#endif - -#ifdef CONFIG_REALVIEW_EB_A9MP -#define core_tile_a9mp() check_eb_proc(REALVIEW_EB_PROC_A9MP) -#else -#define core_tile_a9mp() 0 -#endif - -#define machine_is_realview_eb_mp() \ - (machine_is_realview_eb() && (core_tile_eb11mp() || core_tile_a9mp())) - -#endif /* __ASM_ARCH_BOARD_EB_H */ diff --git a/arch/arm/mach-realview/board-pb1176.h b/arch/arm/mach-realview/board-pb1176.h deleted file mode 100644 index 29c04a9e1344..000000000000 --- a/arch/arm/mach-realview/board-pb1176.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - * Copyright (C) 2008 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_BOARD_PB1176_H -#define __ASM_ARCH_BOARD_PB1176_H - -#include "platform.h" - -/* - * Peripheral addresses - */ -#define REALVIEW_PB1176_UART4_BASE 0x10009000 /* UART 4 */ -#define REALVIEW_PB1176_SCTL_BASE 0x10100000 /* System controller */ -#define REALVIEW_PB1176_SMC_BASE 0x10111000 /* SMC */ -#define REALVIEW_PB1176_DMC_BASE 0x10109000 /* DMC configuration */ -#define REALVIEW_PB1176_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */ -#define REALVIEW_PB1176_FLASH_BASE 0x30000000 -#define REALVIEW_PB1176_FLASH_SIZE SZ_64M -#define REALVIEW_PB1176_SEC_FLASH_BASE 0x3C000000 /* Secure flash */ -#define REALVIEW_PB1176_SEC_FLASH_SIZE SZ_64M - -#define REALVIEW_PB1176_TIMER0_1_BASE 0x10104000 /* Timer 0 and 1 */ -#define REALVIEW_PB1176_TIMER2_3_BASE 0x10105000 /* Timer 2 and 3 */ -#define REALVIEW_PB1176_TIMER4_5_BASE 0x10106000 /* Timer 4 and 5 */ -#define REALVIEW_PB1176_WATCHDOG_BASE 0x10107000 /* watchdog interface */ -#define REALVIEW_PB1176_RTC_BASE 0x10108000 /* Real Time Clock */ -#define REALVIEW_PB1176_GPIO0_BASE 0x1010A000 /* GPIO port 0 */ -#define REALVIEW_PB1176_SSP_BASE 0x1010B000 /* Synchronous Serial Port */ -#define REALVIEW_PB1176_UART0_BASE 0x1010C000 /* UART 0 */ -#define REALVIEW_PB1176_UART1_BASE 0x1010D000 /* UART 1 */ -#define REALVIEW_PB1176_UART2_BASE 0x1010E000 /* UART 2 */ -#define REALVIEW_PB1176_UART3_BASE 0x1010F000 /* UART 3 */ -#define REALVIEW_PB1176_CLCD_BASE 0x10112000 /* CLCD */ -#define REALVIEW_PB1176_ETH_BASE 0x3A000000 /* Ethernet */ -#define REALVIEW_PB1176_USB_BASE 0x3B000000 /* USB */ - -/* - * PCI regions - */ -#define REALVIEW_PB1176_PCI_BASE 0x60000000 /* PCI self config */ -#define REALVIEW_PB1176_PCI_CFG_BASE 0x61000000 /* PCI config */ -#define REALVIEW_PB1176_PCI_IO_BASE0 0x62000000 /* PCI IO region */ -#define REALVIEW_PB1176_PCI_MEM_BASE0 0x63000000 /* Memory region 1 */ -#define REALVIEW_PB1176_PCI_MEM_BASE1 0x64000000 /* Memory region 2 */ -#define REALVIEW_PB1176_PCI_MEM_BASE2 0x68000000 /* Memory region 3 */ - -#define REALVIEW_PB1176_PCI_BASE_SIZE 0x01000000 /* 16MB */ -#define REALVIEW_PB1176_PCI_CFG_BASE_SIZE 0x01000000 /* 16MB */ -#define REALVIEW_PB1176_PCI_IO_BASE0_SIZE 0x01000000 /* 16MB */ -#define REALVIEW_PB1176_PCI_MEM_BASE0_SIZE 0x01000000 /* 16MB */ -#define REALVIEW_PB1176_PCI_MEM_BASE1_SIZE 0x04000000 /* 64MB */ -#define REALVIEW_PB1176_PCI_MEM_BASE2_SIZE 0x08000000 /* 128MB */ - -#define REALVIEW_DC1176_GIC_CPU_BASE 0x10120000 /* GIC CPU interface, on devchip */ -#define REALVIEW_DC1176_GIC_DIST_BASE 0x10121000 /* GIC distributor, on devchip */ -#define REALVIEW_DC1176_ROM_BASE 0x10200000 /* 16KiB NRAM preudo-ROM, on devchip */ -#define REALVIEW_PB1176_GIC_CPU_BASE 0x10040000 /* GIC CPU interface, on FPGA */ -#define REALVIEW_PB1176_GIC_DIST_BASE 0x10041000 /* GIC distributor, on FPGA */ -#define REALVIEW_PB1176_L220_BASE 0x10110000 /* L220 registers */ - -/* - * Control register SYS_RESETCTL Bit 8 is set to 1 to force a soft reset - */ -#define REALVIEW_PB1176_SYS_SOFT_RESET 0x0100 - -#endif /* __ASM_ARCH_BOARD_PB1176_H */ diff --git a/arch/arm/mach-realview/board-pb11mp.h b/arch/arm/mach-realview/board-pb11mp.h deleted file mode 100644 index b16e6e85e92d..000000000000 --- a/arch/arm/mach-realview/board-pb11mp.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * Copyright (C) 2008 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_BOARD_PB11MP_H -#define __ASM_ARCH_BOARD_PB11MP_H - -#include "platform.h" - -/* - * Peripheral addresses - */ -#define REALVIEW_PB11MP_UART0_BASE 0x10009000 /* UART 0 */ -#define REALVIEW_PB11MP_UART1_BASE 0x1000A000 /* UART 1 */ -#define REALVIEW_PB11MP_UART2_BASE 0x1000B000 /* UART 2 */ -#define REALVIEW_PB11MP_UART3_BASE 0x1000C000 /* UART 3 */ -#define REALVIEW_PB11MP_SSP_BASE 0x1000D000 /* Synchronous Serial Port */ -#define REALVIEW_PB11MP_WATCHDOG0_BASE 0x1000F000 /* Watchdog 0 */ -#define REALVIEW_PB11MP_WATCHDOG_BASE 0x10010000 /* watchdog interface */ -#define REALVIEW_PB11MP_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */ -#define REALVIEW_PB11MP_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */ -#define REALVIEW_PB11MP_GPIO0_BASE 0x10013000 /* GPIO port 0 */ -#define REALVIEW_PB11MP_RTC_BASE 0x10017000 /* Real Time Clock */ -#define REALVIEW_PB11MP_TIMER4_5_BASE 0x10018000 /* Timer 4/5 */ -#define REALVIEW_PB11MP_TIMER6_7_BASE 0x10019000 /* Timer 6/7 */ -#define REALVIEW_PB11MP_SCTL_BASE 0x1001A000 /* System Controller */ -#define REALVIEW_PB11MP_CLCD_BASE 0x10020000 /* CLCD */ -#define REALVIEW_PB11MP_ONB_SRAM_BASE 0x10060000 /* On-board SRAM */ -#define REALVIEW_PB11MP_DMC_BASE 0x100E0000 /* DMC configuration */ -#define REALVIEW_PB11MP_SMC_BASE 0x100E1000 /* SMC configuration */ -#define REALVIEW_PB11MP_CAN_BASE 0x100E2000 /* CAN bus */ -#define REALVIEW_PB11MP_CF_BASE 0x18000000 /* Compact flash */ -#define REALVIEW_PB11MP_CF_MEM_BASE 0x18003000 /* SMC for Compact flash */ -#define REALVIEW_PB11MP_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */ -#define REALVIEW_PB11MP_FLASH0_BASE 0x40000000 -#define REALVIEW_PB11MP_FLASH0_SIZE SZ_64M -#define REALVIEW_PB11MP_FLASH1_BASE 0x44000000 -#define REALVIEW_PB11MP_FLASH1_SIZE SZ_64M -#define REALVIEW_PB11MP_ETH_BASE 0x4E000000 /* Ethernet */ -#define REALVIEW_PB11MP_USB_BASE 0x4F000000 /* USB */ -#define REALVIEW_PB11MP_GIC_DIST_BASE 0x1E001000 /* Generic interrupt controller distributor */ -#define REALVIEW_PB11MP_LT_BASE 0xC0000000 /* Logic Tile expansion */ -#define REALVIEW_PB11MP_SDRAM6_BASE 0x70000000 /* SDRAM bank 6 256MB */ -#define REALVIEW_PB11MP_SDRAM7_BASE 0x80000000 /* SDRAM bank 7 256MB */ - -#define REALVIEW_PB11MP_SYS_PLD_CTRL1 0x74 - -/* - * PB11MPCore PCI regions - */ -#define REALVIEW_PB11MP_PCI_BASE 0x90040000 /* PCI-X Unit base */ -#define REALVIEW_PB11MP_PCI_IO_BASE 0x90050000 /* IO Region on AHB */ -#define REALVIEW_PB11MP_PCI_MEM_BASE 0xA0000000 /* MEM Region on AHB */ - -#define REALVIEW_PB11MP_PCI_BASE_SIZE 0x10000 /* 16 Kb */ -#define REALVIEW_PB11MP_PCI_IO_SIZE 0x1000 /* 4 Kb */ -#define REALVIEW_PB11MP_PCI_MEM_SIZE 0x20000000 /* 512 MB */ - -/* - * Testchip peripheral and fpga gic regions - */ -#define REALVIEW_TC11MP_PRIV_MEM_BASE 0x1F000000 -#define REALVIEW_TC11MP_PRIV_MEM_SIZE SZ_8K -#define REALVIEW_TC11MP_SCU_BASE 0x1F000000 /* IRQ, Test chip */ -#define REALVIEW_TC11MP_GIC_CPU_BASE 0x1F000100 /* Test chip interrupt controller CPU interface */ -#define REALVIEW_TC11MP_TWD_BASE 0x1F000600 -#define REALVIEW_TC11MP_GIC_DIST_BASE 0x1F001000 /* Test chip interrupt controller distributor */ -#define REALVIEW_TC11MP_L220_BASE 0x1F002000 /* L220 registers */ - - /* - * Values for REALVIEW_SYS_RESET_CTRL - */ -#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGCLR 0x01 -#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGINIT 0x02 -#define REALVIEW_PB11MP_SYS_CTRL_RESET_DLLRESET 0x03 -#define REALVIEW_PB11MP_SYS_CTRL_RESET_PLLRESET 0x04 -#define REALVIEW_PB11MP_SYS_CTRL_RESET_POR 0x05 -#define REALVIEW_PB11MP_SYS_CTRL_RESET_DoC 0x06 - -#define REALVIEW_PB11MP_SYS_CTRL_LED (1 << 0) - -#endif /* __ASM_ARCH_BOARD_PB11MP_H */ diff --git a/arch/arm/mach-realview/board-pba8.h b/arch/arm/mach-realview/board-pba8.h deleted file mode 100644 index 6a1391f50373..000000000000 --- a/arch/arm/mach-realview/board-pba8.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * Copyright (C) 2008 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __ASM_ARCH_BOARD_PBA8_H -#define __ASM_ARCH_BOARD_PBA8_H - -#include "platform.h" - -/* - * Peripheral addresses - */ -#define REALVIEW_PBA8_UART0_BASE 0x10009000 /* UART 0 */ -#define REALVIEW_PBA8_UART1_BASE 0x1000A000 /* UART 1 */ -#define REALVIEW_PBA8_UART2_BASE 0x1000B000 /* UART 2 */ -#define REALVIEW_PBA8_UART3_BASE 0x1000C000 /* UART 3 */ -#define REALVIEW_PBA8_SSP_BASE 0x1000D000 /* Synchronous Serial Port */ -#define REALVIEW_PBA8_WATCHDOG0_BASE 0x1000F000 /* Watchdog 0 */ -#define REALVIEW_PBA8_WATCHDOG_BASE 0x10010000 /* watchdog interface */ -#define REALVIEW_PBA8_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */ -#define REALVIEW_PBA8_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */ -#define REALVIEW_PBA8_GPIO0_BASE 0x10013000 /* GPIO port 0 */ -#define REALVIEW_PBA8_RTC_BASE 0x10017000 /* Real Time Clock */ -#define REALVIEW_PBA8_TIMER4_5_BASE 0x10018000 /* Timer 4/5 */ -#define REALVIEW_PBA8_TIMER6_7_BASE 0x10019000 /* Timer 6/7 */ -#define REALVIEW_PBA8_SCTL_BASE 0x1001A000 /* System Controller */ -#define REALVIEW_PBA8_CLCD_BASE 0x10020000 /* CLCD */ -#define REALVIEW_PBA8_ONB_SRAM_BASE 0x10060000 /* On-board SRAM */ -#define REALVIEW_PBA8_DMC_BASE 0x100E0000 /* DMC configuration */ -#define REALVIEW_PBA8_SMC_BASE 0x100E1000 /* SMC configuration */ -#define REALVIEW_PBA8_CAN_BASE 0x100E2000 /* CAN bus */ -#define REALVIEW_PBA8_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */ -#define REALVIEW_PBA8_FLASH0_BASE 0x40000000 -#define REALVIEW_PBA8_FLASH0_SIZE SZ_64M -#define REALVIEW_PBA8_FLASH1_BASE 0x44000000 -#define REALVIEW_PBA8_FLASH1_SIZE SZ_64M -#define REALVIEW_PBA8_ETH_BASE 0x4E000000 /* Ethernet */ -#define REALVIEW_PBA8_USB_BASE 0x4F000000 /* USB */ -#define REALVIEW_PBA8_GIC_DIST_BASE 0x1E001000 /* Generic interrupt controller distributor */ -#define REALVIEW_PBA8_LT_BASE 0xC0000000 /* Logic Tile expansion */ -#define REALVIEW_PBA8_SDRAM6_BASE 0x70000000 /* SDRAM bank 6 256MB */ -#define REALVIEW_PBA8_SDRAM7_BASE 0x80000000 /* SDRAM bank 7 256MB */ - -#define REALVIEW_PBA8_SYS_PLD_CTRL1 0x74 - -/* - * PBA8 PCI regions - */ -#define REALVIEW_PBA8_PCI_BASE 0x90040000 /* PCI-X Unit base */ -#define REALVIEW_PBA8_PCI_IO_BASE 0x90050000 /* IO Region on AHB */ -#define REALVIEW_PBA8_PCI_MEM_BASE 0xA0000000 /* MEM Region on AHB */ - -#define REALVIEW_PBA8_PCI_BASE_SIZE 0x10000 /* 16 Kb */ -#define REALVIEW_PBA8_PCI_IO_SIZE 0x1000 /* 4 Kb */ -#define REALVIEW_PBA8_PCI_MEM_SIZE 0x20000000 /* 512 MB */ - -#endif /* __ASM_ARCH_BOARD_PBA8_H */ diff --git a/arch/arm/mach-realview/board-pbx.h b/arch/arm/mach-realview/board-pbx.h deleted file mode 100644 index 5cda480b12bb..000000000000 --- a/arch/arm/mach-realview/board-pbx.h +++ /dev/null @@ -1,106 +0,0 @@ -/* - * Copyright (C) 2009 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_BOARD_PBX_H -#define __ASM_ARCH_BOARD_PBX_H - -#include "platform.h" - -/* - * Peripheral addresses - */ -#define REALVIEW_PBX_UART0_BASE 0x10009000 /* UART 0 */ -#define REALVIEW_PBX_UART1_BASE 0x1000A000 /* UART 1 */ -#define REALVIEW_PBX_UART2_BASE 0x1000B000 /* UART 2 */ -#define REALVIEW_PBX_UART3_BASE 0x1000C000 /* UART 3 */ -#define REALVIEW_PBX_SSP_BASE 0x1000D000 /* Synchronous Serial Port */ -#define REALVIEW_PBX_WATCHDOG0_BASE 0x1000F000 /* Watchdog 0 */ -#define REALVIEW_PBX_WATCHDOG_BASE 0x10010000 /* watchdog interface */ -#define REALVIEW_PBX_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */ -#define REALVIEW_PBX_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */ -#define REALVIEW_PBX_GPIO0_BASE 0x10013000 /* GPIO port 0 */ -#define REALVIEW_PBX_RTC_BASE 0x10017000 /* Real Time Clock */ -#define REALVIEW_PBX_TIMER4_5_BASE 0x10018000 /* Timer 4/5 */ -#define REALVIEW_PBX_TIMER6_7_BASE 0x10019000 /* Timer 6/7 */ -#define REALVIEW_PBX_SCTL_BASE 0x1001A000 /* System Controller */ -#define REALVIEW_PBX_CLCD_BASE 0x10020000 /* CLCD */ -#define REALVIEW_PBX_ONB_SRAM_BASE 0x10060000 /* On-board SRAM */ -#define REALVIEW_PBX_DMC_BASE 0x100E0000 /* DMC configuration */ -#define REALVIEW_PBX_SMC_BASE 0x100E1000 /* SMC configuration */ -#define REALVIEW_PBX_CAN_BASE 0x100E2000 /* CAN bus */ -#define REALVIEW_PBX_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */ -#define REALVIEW_PBX_FLASH0_BASE 0x40000000 -#define REALVIEW_PBX_FLASH0_SIZE SZ_64M -#define REALVIEW_PBX_FLASH1_BASE 0x44000000 -#define REALVIEW_PBX_FLASH1_SIZE SZ_64M -#define REALVIEW_PBX_ETH_BASE 0x4E000000 /* Ethernet */ -#define REALVIEW_PBX_USB_BASE 0x4F000000 /* USB */ -#define REALVIEW_PBX_GIC_DIST_BASE 0x1E001000 /* Generic interrupt controller distributor */ -#define REALVIEW_PBX_LT_BASE 0xC0000000 /* Logic Tile expansion */ -#define REALVIEW_PBX_SDRAM6_BASE 0x70000000 /* SDRAM bank 6 256MB */ -#define REALVIEW_PBX_SDRAM7_BASE 0x80000000 /* SDRAM bank 7 256MB */ - -/* - * Tile-specific addresses - */ -#define REALVIEW_PBX_TILE_SCU_BASE 0x1F000000 /* SCU registers */ -#define REALVIEW_PBX_TILE_GIC_CPU_BASE 0x1F000100 /* Private Generic interrupt controller CPU interface */ -#define REALVIEW_PBX_TILE_TWD_BASE 0x1F000600 -#define REALVIEW_PBX_TILE_TWD_PERCPU_BASE 0x1F000700 -#define REALVIEW_PBX_TILE_TWD_SIZE 0x00000100 -#define REALVIEW_PBX_TILE_GIC_DIST_BASE 0x1F001000 /* Private Generic interrupt controller distributor */ -#define REALVIEW_PBX_TILE_L220_BASE 0x1F002000 /* L220 registers */ - -#define REALVIEW_PBX_SYS_PLD_CTRL1 0x74 - -/* - * PBX PCI regions - */ -#define REALVIEW_PBX_PCI_BASE 0x90040000 /* PCI-X Unit base */ -#define REALVIEW_PBX_PCI_IO_BASE 0x90050000 /* IO Region on AHB */ -#define REALVIEW_PBX_PCI_MEM_BASE 0xA0000000 /* MEM Region on AHB */ - -#define REALVIEW_PBX_PCI_BASE_SIZE 0x10000 /* 16 Kb */ -#define REALVIEW_PBX_PCI_IO_SIZE 0x1000 /* 4 Kb */ -#define REALVIEW_PBX_PCI_MEM_SIZE 0x20000000 /* 512 MB */ - -/* - * Core tile identification (REALVIEW_SYS_PROCID) - */ -#define REALVIEW_PBX_PROC_MASK 0xFF000000 -#define REALVIEW_PBX_PROC_ARM7TDMI 0x00000000 -#define REALVIEW_PBX_PROC_ARM9 0x02000000 -#define REALVIEW_PBX_PROC_ARM11 0x04000000 -#define REALVIEW_PBX_PROC_ARM11MP 0x06000000 -#define REALVIEW_PBX_PROC_A9MP 0x0C000000 -#define REALVIEW_PBX_PROC_A8 0x0E000000 - -#define check_pbx_proc(proc_type) \ - ((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_PBX_PROC_MASK) \ - == proc_type) - -#ifdef CONFIG_MACH_REALVIEW_PBX -#define core_tile_pbx11mp() check_pbx_proc(REALVIEW_PBX_PROC_ARM11MP) -#define core_tile_pbxa9mp() check_pbx_proc(REALVIEW_PBX_PROC_A9MP) -#define core_tile_pbxa8() check_pbx_proc(REALVIEW_PBX_PROC_A8) -#else -#define core_tile_pbx11mp() 0 -#define core_tile_pbxa9mp() 0 -#define core_tile_pbxa8() 0 -#endif - -#endif /* __ASM_ARCH_BOARD_PBX_H */ diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c deleted file mode 100644 index baf174542e36..000000000000 --- a/arch/arm/mach-realview/core.c +++ /dev/null @@ -1,404 +0,0 @@ -/* - * linux/arch/arm/mach-realview/core.c - * - * Copyright (C) 1999 - 2003 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/device.h> -#include <linux/interrupt.h> -#include <linux/amba/bus.h> -#include <linux/amba/clcd.h> -#include <linux/platform_data/video-clcd-versatile.h> -#include <linux/io.h> -#include <linux/smsc911x.h> -#include <linux/smc91x.h> -#include <linux/ata_platform.h> -#include <linux/amba/mmci.h> -#include <linux/gfp.h> -#include <linux/mtd/physmap.h> -#include <linux/memblock.h> - -#include <clocksource/timer-sp804.h> -#include "hardware.h" -#include <asm/irq.h> -#include <asm/mach-types.h> -#include <asm/hardware/icst.h> - -#include <asm/mach/arch.h> -#include <asm/mach/irq.h> -#include <asm/mach/map.h> - -#include "platform.h" - -#include <plat/sched_clock.h> - -#include "core.h" - -#define REALVIEW_FLASHCTRL (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET) - -static void realview_flash_set_vpp(struct platform_device *pdev, int on) -{ - u32 val; - - val = __raw_readl(REALVIEW_FLASHCTRL); - if (on) - val |= REALVIEW_FLASHPROG_FLVPPEN; - else - val &= ~REALVIEW_FLASHPROG_FLVPPEN; - __raw_writel(val, REALVIEW_FLASHCTRL); -} - -static struct physmap_flash_data realview_flash_data = { - .width = 4, - .set_vpp = realview_flash_set_vpp, -}; - -struct platform_device realview_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &realview_flash_data, - }, -}; - -int realview_flash_register(struct resource *res, u32 num) -{ - realview_flash_device.resource = res; - realview_flash_device.num_resources = num; - return platform_device_register(&realview_flash_device); -} - -static struct smsc911x_platform_config smsc911x_config = { - .flags = SMSC911X_USE_32BIT, - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, - .phy_interface = PHY_INTERFACE_MODE_MII, -}; - -static struct smc91x_platdata smc91x_platdata = { - .flags = SMC91X_USE_32BIT | SMC91X_NOWAIT, -}; - -static struct platform_device realview_eth_device = { - .name = "smsc911x", - .id = 0, - .num_resources = 2, -}; - -int realview_eth_register(const char *name, struct resource *res) -{ - if (name) - realview_eth_device.name = name; - realview_eth_device.resource = res; - if (strcmp(realview_eth_device.name, "smsc911x") == 0) - realview_eth_device.dev.platform_data = &smsc911x_config; - else - realview_eth_device.dev.platform_data = &smc91x_platdata; - - return platform_device_register(&realview_eth_device); -} - -struct platform_device realview_usb_device = { - .name = "isp1760", - .num_resources = 2, -}; - -int realview_usb_register(struct resource *res) -{ - realview_usb_device.resource = res; - return platform_device_register(&realview_usb_device); -} - -static struct pata_platform_info pata_platform_data = { - .ioport_shift = 1, -}; - -static struct resource pata_resources[] = { - [0] = { - .start = REALVIEW_CF_BASE, - .end = REALVIEW_CF_BASE + 0xff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = REALVIEW_CF_BASE + 0x100, - .end = REALVIEW_CF_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device realview_cf_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(pata_resources), - .resource = pata_resources, - .dev = { - .platform_data = &pata_platform_data, - }, -}; - -static struct resource realview_leds_resources[] = { - { - .start = REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET, - .end = REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET + 4, - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device realview_leds_device = { - .name = "versatile-leds", - .id = -1, - .num_resources = ARRAY_SIZE(realview_leds_resources), - .resource = realview_leds_resources, -}; - -static struct resource realview_i2c_resource = { - .start = REALVIEW_I2C_BASE, - .end = REALVIEW_I2C_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, -}; - -struct platform_device realview_i2c_device = { - .name = "versatile-i2c", - .id = 0, - .num_resources = 1, - .resource = &realview_i2c_resource, -}; - -static struct i2c_board_info realview_i2c_board_info[] = { - { - I2C_BOARD_INFO("ds1338", 0xd0 >> 1), - }, -}; - -static int __init realview_i2c_init(void) -{ - return i2c_register_board_info(0, realview_i2c_board_info, - ARRAY_SIZE(realview_i2c_board_info)); -} -arch_initcall(realview_i2c_init); - -#define REALVIEW_SYSMCI (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET) - -/* - * This is only used if GPIOLIB support is disabled - */ -static unsigned int realview_mmc_status(struct device *dev) -{ - struct amba_device *adev = container_of(dev, struct amba_device, dev); - u32 mask; - - if (machine_is_realview_pb1176()) { - static bool inserted = false; - - /* - * The PB1176 does not have the status register, - * assume it is inserted at startup, then invert - * for each call so card insertion/removal will - * be detected anyway. This will not be called if - * GPIO on PL061 is active, which is the proper - * way to do this on the PB1176. - */ - inserted = !inserted; - return inserted ? 0 : 1; - } - - if (adev->res.start == REALVIEW_MMCI0_BASE) - mask = 1; - else - mask = 2; - - return readl(REALVIEW_SYSMCI) & mask; -} - -struct mmci_platform_data realview_mmc0_plat_data = { - .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .status = realview_mmc_status, - .gpio_wp = 17, - .gpio_cd = 16, - .cd_invert = true, -}; - -struct mmci_platform_data realview_mmc1_plat_data = { - .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .status = realview_mmc_status, - .gpio_wp = 19, - .gpio_cd = 18, - .cd_invert = true, -}; - -void __init realview_init_early(void) -{ - void __iomem *sys = __io_address(REALVIEW_SYS_BASE); - - versatile_sched_clock_init(sys + REALVIEW_SYS_24MHz_OFFSET, 24000000); -} - -/* - * CLCD support. - */ -#define SYS_CLCD_NLCDIOON (1 << 2) -#define SYS_CLCD_VDDPOSSWITCH (1 << 3) -#define SYS_CLCD_PWR3V5SWITCH (1 << 4) -#define SYS_CLCD_ID_MASK (0x1f << 8) -#define SYS_CLCD_ID_SANYO_3_8 (0x00 << 8) -#define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8) -#define SYS_CLCD_ID_EPSON_2_2 (0x02 << 8) -#define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8) -#define SYS_CLCD_ID_VGA (0x1f << 8) - -/* - * Disable all display connectors on the interface module. - */ -static void realview_clcd_disable(struct clcd_fb *fb) -{ - void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET; - u32 val; - - val = readl(sys_clcd); - val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH; - writel(val, sys_clcd); -} - -/* - * Enable the relevant connector on the interface module. - */ -static void realview_clcd_enable(struct clcd_fb *fb) -{ - void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET; - u32 val; - - /* - * Enable the PSUs - */ - val = readl(sys_clcd); - val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH; - writel(val, sys_clcd); -} - -/* - * Detect which LCD panel is connected, and return the appropriate - * clcd_panel structure. Note: we do not have any information on - * the required timings for the 8.4in panel, so we presently assume - * VGA timings. - */ -static int realview_clcd_setup(struct clcd_fb *fb) -{ - void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET; - const char *panel_name, *vga_panel_name; - unsigned long framesize; - u32 val; - - if (machine_is_realview_eb()) { - /* VGA, 16bpp */ - framesize = 640 * 480 * 2; - vga_panel_name = "VGA"; - } else { - /* XVGA, 16bpp */ - framesize = 1024 * 768 * 2; - vga_panel_name = "XVGA"; - } - - val = readl(sys_clcd) & SYS_CLCD_ID_MASK; - if (val == SYS_CLCD_ID_SANYO_3_8) - panel_name = "Sanyo TM38QV67A02A"; - else if (val == SYS_CLCD_ID_SANYO_2_5) - panel_name = "Sanyo QVGA Portrait"; - else if (val == SYS_CLCD_ID_EPSON_2_2) - panel_name = "Epson L2F50113T00"; - else if (val == SYS_CLCD_ID_VGA) - panel_name = vga_panel_name; - else { - pr_err("CLCD: unknown LCD panel ID 0x%08x, using VGA\n", val); - panel_name = vga_panel_name; - } - - fb->panel = versatile_clcd_get_panel(panel_name); - if (!fb->panel) - return -EINVAL; - - return versatile_clcd_setup_dma(fb, framesize); -} - -struct clcd_board clcd_plat_data = { - .name = "RealView", - .caps = CLCD_CAP_ALL, - .check = clcdfb_check, - .decode = clcdfb_decode, - .disable = realview_clcd_disable, - .enable = realview_clcd_enable, - .setup = realview_clcd_setup, - .mmap = versatile_clcd_mmap_dma, - .remove = versatile_clcd_remove_dma, -}; - -/* - * Where is the timer (VA)? - */ -void __iomem *timer0_va_base; -void __iomem *timer1_va_base; -void __iomem *timer2_va_base; -void __iomem *timer3_va_base; - -/* - * Set up the clock source and clock events devices - */ -void __init realview_timer_init(unsigned int timer_irq) -{ - u32 val; - - /* - * set clock frequency: - * REALVIEW_REFCLK is 32KHz - * REALVIEW_TIMCLK is 1MHz - */ - val = readl(__io_address(REALVIEW_SCTL_BASE)); - writel((REALVIEW_TIMCLK << REALVIEW_TIMER1_EnSel) | - (REALVIEW_TIMCLK << REALVIEW_TIMER2_EnSel) | - (REALVIEW_TIMCLK << REALVIEW_TIMER3_EnSel) | - (REALVIEW_TIMCLK << REALVIEW_TIMER4_EnSel) | val, - __io_address(REALVIEW_SCTL_BASE)); - - /* - * Initialise to a known state (all timers off) - */ - sp804_timer_disable(timer0_va_base); - sp804_timer_disable(timer1_va_base); - sp804_timer_disable(timer2_va_base); - sp804_timer_disable(timer3_va_base); - - sp804_clocksource_init(timer3_va_base, "timer3"); - sp804_clockevents_init(timer0_va_base, timer_irq, "timer0"); -} - -/* - * Setup the memory banks. - */ -void realview_fixup(struct tag *tags, char **from) -{ - /* - * Most RealView platforms have 512MB contiguous RAM at 0x70000000. - * Half of this is mirrored at 0. - */ -#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET - memblock_add(0x70000000, SZ_512M); -#else - memblock_add(0, SZ_256M); -#endif -} diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h deleted file mode 100644 index 05a995ea16d3..000000000000 --- a/arch/arm/mach-realview/core.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - * Copyright (C) 2004 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_REALVIEW_H -#define __ASM_ARCH_REALVIEW_H - -#include <linux/amba/bus.h> -#include <linux/io.h> - -#include <asm/setup.h> - -#define APB_DEVICE(name, busid, base, plat) \ -static AMBA_APB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat) - -#define AHB_DEVICE(name, busid, base, plat) \ -static AMBA_AHB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat) - -struct machine_desc; - -extern struct platform_device realview_flash_device; -extern struct platform_device realview_cf_device; -extern struct platform_device realview_leds_device; -extern struct platform_device realview_i2c_device; -extern struct mmci_platform_data realview_mmc0_plat_data; -extern struct mmci_platform_data realview_mmc1_plat_data; -extern struct clcd_board clcd_plat_data; -extern void __iomem *timer0_va_base; -extern void __iomem *timer1_va_base; -extern void __iomem *timer2_va_base; -extern void __iomem *timer3_va_base; - -extern void realview_timer_init(unsigned int timer_irq); -extern int realview_flash_register(struct resource *res, u32 num); -extern int realview_eth_register(const char *name, struct resource *res); -extern int realview_usb_register(struct resource *res); -extern void realview_init_early(void); -extern void realview_fixup(struct tag *tags, char **from); - -extern const struct smp_operations realview_smp_ops; -extern void realview_cpu_die(unsigned int cpu); - -#endif diff --git a/arch/arm/mach-realview/hardware.h b/arch/arm/mach-realview/hardware.h deleted file mode 100644 index 957a230aadf4..000000000000 --- a/arch/arm/mach-realview/hardware.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * This file contains the hardware definitions of the RealView boards. - * - * Copyright (C) 2003 ARM Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include <asm/sizes.h> - -/* macro to get at IO space when running virtually */ -#ifdef CONFIG_MMU -/* - * Statically mapped addresses: - * - * 10xx xxxx -> fbxx xxxx - * 1exx xxxx -> fdxx xxxx - * 1fxx xxxx -> fexx xxxx - */ -#define IO_ADDRESS(x) (((x) & 0x03ffffff) + 0xfb000000) -#else -#define IO_ADDRESS(x) (x) -#endif -#define __io_address(n) IOMEM(IO_ADDRESS(n)) - -#endif diff --git a/arch/arm/mach-realview/hotplug.h b/arch/arm/mach-realview/hotplug.h new file mode 100644 index 000000000000..eacd7a4dad2f --- /dev/null +++ b/arch/arm/mach-realview/hotplug.h @@ -0,0 +1 @@ +void realview_cpu_die(unsigned int cpu); diff --git a/arch/arm/mach-realview/irqs-eb.h b/arch/arm/mach-realview/irqs-eb.h deleted file mode 100644 index 61e31680a749..000000000000 --- a/arch/arm/mach-realview/irqs-eb.h +++ /dev/null @@ -1,114 +0,0 @@ -/* - * Copyright (C) 2007 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __MACH_IRQS_EB_H -#define __MACH_IRQS_EB_H - -#define IRQ_LOCALTIMER 29 -#define IRQ_EB_GIC_START 32 - -/* - * RealView EB interrupt sources - */ -#define IRQ_EB_WDOG (IRQ_EB_GIC_START + 0) /* Watchdog timer */ -#define IRQ_EB_SOFT (IRQ_EB_GIC_START + 1) /* Software interrupt */ -#define IRQ_EB_COMMRx (IRQ_EB_GIC_START + 2) /* Debug Comm Rx interrupt */ -#define IRQ_EB_COMMTx (IRQ_EB_GIC_START + 3) /* Debug Comm Tx interrupt */ -#define IRQ_EB_TIMER0_1 (IRQ_EB_GIC_START + 4) /* Timer 0 and 1 */ -#define IRQ_EB_TIMER2_3 (IRQ_EB_GIC_START + 5) /* Timer 2 and 3 */ -#define IRQ_EB_GPIO0 (IRQ_EB_GIC_START + 6) /* GPIO 0 */ -#define IRQ_EB_GPIO1 (IRQ_EB_GIC_START + 7) /* GPIO 1 */ -#define IRQ_EB_GPIO2 (IRQ_EB_GIC_START + 8) /* GPIO 2 */ - /* 9 reserved */ -#define IRQ_EB_RTC (IRQ_EB_GIC_START + 10) /* Real Time Clock */ -#define IRQ_EB_SSP (IRQ_EB_GIC_START + 11) /* Synchronous Serial Port */ -#define IRQ_EB_UART0 (IRQ_EB_GIC_START + 12) /* UART 0 on development chip */ -#define IRQ_EB_UART1 (IRQ_EB_GIC_START + 13) /* UART 1 on development chip */ -#define IRQ_EB_UART2 (IRQ_EB_GIC_START + 14) /* UART 2 on development chip */ -#define IRQ_EB_UART3 (IRQ_EB_GIC_START + 15) /* UART 3 on development chip */ -#define IRQ_EB_SCI (IRQ_EB_GIC_START + 16) /* Smart Card Interface */ -#define IRQ_EB_MMCI0A (IRQ_EB_GIC_START + 17) /* Multimedia Card 0A */ -#define IRQ_EB_MMCI0B (IRQ_EB_GIC_START + 18) /* Multimedia Card 0B */ -#define IRQ_EB_AACI (IRQ_EB_GIC_START + 19) /* Audio Codec */ -#define IRQ_EB_KMI0 (IRQ_EB_GIC_START + 20) /* Keyboard/Mouse port 0 */ -#define IRQ_EB_KMI1 (IRQ_EB_GIC_START + 21) /* Keyboard/Mouse port 1 */ -#define IRQ_EB_CHARLCD (IRQ_EB_GIC_START + 22) /* Character LCD */ -#define IRQ_EB_CLCD (IRQ_EB_GIC_START + 23) /* CLCD controller */ -#define IRQ_EB_DMA (IRQ_EB_GIC_START + 24) /* DMA controller */ -#define IRQ_EB_PWRFAIL (IRQ_EB_GIC_START + 25) /* Power failure */ -#define IRQ_EB_PISMO (IRQ_EB_GIC_START + 26) /* PISMO interface */ -#define IRQ_EB_DoC (IRQ_EB_GIC_START + 27) /* Disk on Chip memory controller */ -#define IRQ_EB_ETH (IRQ_EB_GIC_START + 28) /* Ethernet controller */ -#define IRQ_EB_USB (IRQ_EB_GIC_START + 29) /* USB controller */ -#define IRQ_EB_TSPEN (IRQ_EB_GIC_START + 30) /* Touchscreen pen */ -#define IRQ_EB_TSKPAD (IRQ_EB_GIC_START + 31) /* Touchscreen keypad */ - -/* - * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile) - */ -#define IRQ_EB11MP_AACI (IRQ_EB_GIC_START + 0) -#define IRQ_EB11MP_TIMER0_1 (IRQ_EB_GIC_START + 1) -#define IRQ_EB11MP_TIMER2_3 (IRQ_EB_GIC_START + 2) -#define IRQ_EB11MP_USB (IRQ_EB_GIC_START + 3) -#define IRQ_EB11MP_UART0 (IRQ_EB_GIC_START + 4) -#define IRQ_EB11MP_UART1 (IRQ_EB_GIC_START + 5) -#define IRQ_EB11MP_RTC (IRQ_EB_GIC_START + 6) -#define IRQ_EB11MP_KMI0 (IRQ_EB_GIC_START + 7) -#define IRQ_EB11MP_KMI1 (IRQ_EB_GIC_START + 8) -#define IRQ_EB11MP_ETH (IRQ_EB_GIC_START + 9) -#define IRQ_EB11MP_EB_IRQ1 (IRQ_EB_GIC_START + 10) /* main GIC */ -#define IRQ_EB11MP_EB_IRQ2 (IRQ_EB_GIC_START + 11) /* tile GIC */ -#define IRQ_EB11MP_EB_FIQ1 (IRQ_EB_GIC_START + 12) /* main GIC */ -#define IRQ_EB11MP_EB_FIQ2 (IRQ_EB_GIC_START + 13) /* tile GIC */ -#define IRQ_EB11MP_MMCI0A (IRQ_EB_GIC_START + 14) -#define IRQ_EB11MP_MMCI0B (IRQ_EB_GIC_START + 15) - -#define IRQ_EB11MP_PMU_CPU0 (IRQ_EB_GIC_START + 17) -#define IRQ_EB11MP_PMU_CPU1 (IRQ_EB_GIC_START + 18) -#define IRQ_EB11MP_PMU_CPU2 (IRQ_EB_GIC_START + 19) -#define IRQ_EB11MP_PMU_CPU3 (IRQ_EB_GIC_START + 20) -#define IRQ_EB11MP_PMU_SCU0 (IRQ_EB_GIC_START + 21) -#define IRQ_EB11MP_PMU_SCU1 (IRQ_EB_GIC_START + 22) -#define IRQ_EB11MP_PMU_SCU2 (IRQ_EB_GIC_START + 23) -#define IRQ_EB11MP_PMU_SCU3 (IRQ_EB_GIC_START + 24) -#define IRQ_EB11MP_PMU_SCU4 (IRQ_EB_GIC_START + 25) -#define IRQ_EB11MP_PMU_SCU5 (IRQ_EB_GIC_START + 26) -#define IRQ_EB11MP_PMU_SCU6 (IRQ_EB_GIC_START + 27) -#define IRQ_EB11MP_PMU_SCU7 (IRQ_EB_GIC_START + 28) - -#define IRQ_EB11MP_L220_EVENT (IRQ_EB_GIC_START + 29) -#define IRQ_EB11MP_L220_SLAVE (IRQ_EB_GIC_START + 30) -#define IRQ_EB11MP_L220_DECODE (IRQ_EB_GIC_START + 31) - -/* - * The 11MPcore tile leaves the following unconnected. - */ -#define IRQ_EB11MP_UART2 0 -#define IRQ_EB11MP_UART3 0 -#define IRQ_EB11MP_CLCD 0 -#define IRQ_EB11MP_DMA 0 -#define IRQ_EB11MP_WDOG 0 -#define IRQ_EB11MP_GPIO0 0 -#define IRQ_EB11MP_GPIO1 0 -#define IRQ_EB11MP_GPIO2 0 -#define IRQ_EB11MP_SCI 0 -#define IRQ_EB11MP_SSP 0 - -#define NR_GIC_EB11MP 2 - -#endif /* __MACH_IRQS_EB_H */ diff --git a/arch/arm/mach-realview/irqs-pb1176.h b/arch/arm/mach-realview/irqs-pb1176.h deleted file mode 100644 index 778edfd430e7..000000000000 --- a/arch/arm/mach-realview/irqs-pb1176.h +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Copyright (C) 2008 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __MACH_IRQS_PB1176_H -#define __MACH_IRQS_PB1176_H - -#define IRQ_DC1176_GIC_START 32 -#define IRQ_PB1176_GIC_START 64 - -/* - * ARM1176 DevChip interrupt sources (primary GIC) - */ -#define IRQ_DC1176_WATCHDOG (IRQ_DC1176_GIC_START + 0) /* Watchdog timer */ -#define IRQ_DC1176_SOFTINT (IRQ_DC1176_GIC_START + 1) /* Software interrupt */ -#define IRQ_DC1176_COMMRx (IRQ_DC1176_GIC_START + 2) /* Debug Comm Rx interrupt */ -#define IRQ_DC1176_COMMTx (IRQ_DC1176_GIC_START + 3) /* Debug Comm Tx interrupt */ -#define IRQ_DC1176_CORE_PMU (IRQ_DC1176_GIC_START + 7) /* Core PMU interrupt */ -#define IRQ_DC1176_TIMER0 (IRQ_DC1176_GIC_START + 8) /* Timer 0 */ -#define IRQ_DC1176_TIMER1 (IRQ_DC1176_GIC_START + 9) /* Timer 1 */ -#define IRQ_DC1176_TIMER2 (IRQ_DC1176_GIC_START + 10) /* Timer 2 */ -#define IRQ_DC1176_APC (IRQ_DC1176_GIC_START + 11) -#define IRQ_DC1176_IEC (IRQ_DC1176_GIC_START + 12) -#define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13) -#define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14) -#define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */ -#define IRQ_DC1176_GPIO0 (IRQ_DC1176_GIC_START + 16) -#define IRQ_DC1176_SSP (IRQ_DC1176_GIC_START + 17) /* SSP port */ -#define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */ -#define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */ -#define IRQ_DC1176_UART2 (IRQ_DC1176_GIC_START + 20) /* UART 2 on development chip */ -#define IRQ_DC1176_UART3 (IRQ_DC1176_GIC_START + 21) /* UART 3 on development chip */ - -#define IRQ_DC1176_PB_IRQ2 (IRQ_DC1176_GIC_START + 30) /* tile GIC */ -#define IRQ_DC1176_PB_IRQ1 (IRQ_DC1176_GIC_START + 31) /* main GIC */ - -/* - * RealView PB1176 interrupt sources (secondary GIC) - */ -#define IRQ_PB1176_MMCI0A (IRQ_PB1176_GIC_START + 1) /* Multimedia Card 0A */ -#define IRQ_PB1176_MMCI0B (IRQ_PB1176_GIC_START + 2) /* Multimedia Card 0A */ -#define IRQ_PB1176_KMI0 (IRQ_PB1176_GIC_START + 3) /* Keyboard/Mouse port 0 */ -#define IRQ_PB1176_KMI1 (IRQ_PB1176_GIC_START + 4) /* Keyboard/Mouse port 1 */ -#define IRQ_PB1176_SCI (IRQ_PB1176_GIC_START + 5) -#define IRQ_PB1176_UART4 (IRQ_PB1176_GIC_START + 6) /* UART 4 on baseboard */ -#define IRQ_PB1176_CHARLCD (IRQ_PB1176_GIC_START + 7) /* Character LCD */ -#define IRQ_PB1176_GPIO1 (IRQ_PB1176_GIC_START + 8) -#define IRQ_PB1176_GPIO2 (IRQ_PB1176_GIC_START + 9) -#define IRQ_PB1176_ETH (IRQ_PB1176_GIC_START + 10) /* Ethernet controller */ -#define IRQ_PB1176_USB (IRQ_PB1176_GIC_START + 11) /* USB controller */ - -#define IRQ_PB1176_PISMO (IRQ_PB1176_GIC_START + 16) - -#define IRQ_PB1176_AACI (IRQ_PB1176_GIC_START + 19) /* Audio Codec */ - -#define IRQ_PB1176_TIMER0_1 (IRQ_PB1176_GIC_START + 22) -#define IRQ_PB1176_TIMER2_3 (IRQ_PB1176_GIC_START + 23) -#define IRQ_PB1176_DMAC (IRQ_PB1176_GIC_START + 24) /* DMA controller */ -#define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */ - -#define IRQ_PB1176_SCTL -1 - -#endif /* __MACH_IRQS_PB1176_H */ diff --git a/arch/arm/mach-realview/irqs-pb11mp.h b/arch/arm/mach-realview/irqs-pb11mp.h deleted file mode 100644 index 938898a3df9f..000000000000 --- a/arch/arm/mach-realview/irqs-pb11mp.h +++ /dev/null @@ -1,97 +0,0 @@ -/* - * Copyright (C) 2008 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __MACH_IRQS_PB11MP_H -#define __MACH_IRQS_PB11MP_H - -#define IRQ_LOCALTIMER 29 -#define IRQ_TC11MP_GIC_START 32 -#define IRQ_PB11MP_GIC_START 64 - -/* - * ARM11MPCore test chip interrupt sources (primary GIC on the test chip) - */ -#define IRQ_TC11MP_AACI (IRQ_TC11MP_GIC_START + 0) -#define IRQ_TC11MP_TIMER0_1 (IRQ_TC11MP_GIC_START + 1) -#define IRQ_TC11MP_TIMER2_3 (IRQ_TC11MP_GIC_START + 2) -#define IRQ_TC11MP_USB (IRQ_TC11MP_GIC_START + 3) -#define IRQ_TC11MP_UART0 (IRQ_TC11MP_GIC_START + 4) -#define IRQ_TC11MP_UART1 (IRQ_TC11MP_GIC_START + 5) -#define IRQ_TC11MP_RTC (IRQ_TC11MP_GIC_START + 6) -#define IRQ_TC11MP_KMI0 (IRQ_TC11MP_GIC_START + 7) -#define IRQ_TC11MP_KMI1 (IRQ_TC11MP_GIC_START + 8) -#define IRQ_TC11MP_ETH (IRQ_TC11MP_GIC_START + 9) -#define IRQ_TC11MP_PB_IRQ1 (IRQ_TC11MP_GIC_START + 10) /* main GIC */ -#define IRQ_TC11MP_PB_IRQ2 (IRQ_TC11MP_GIC_START + 11) /* tile GIC */ -#define IRQ_TC11MP_PB_FIQ1 (IRQ_TC11MP_GIC_START + 12) /* main GIC */ -#define IRQ_TC11MP_PB_FIQ2 (IRQ_TC11MP_GIC_START + 13) /* tile GIC */ -#define IRQ_TC11MP_MMCI0A (IRQ_TC11MP_GIC_START + 14) -#define IRQ_TC11MP_MMCI0B (IRQ_TC11MP_GIC_START + 15) - -#define IRQ_TC11MP_PMU_CPU0 (IRQ_TC11MP_GIC_START + 17) -#define IRQ_TC11MP_PMU_CPU1 (IRQ_TC11MP_GIC_START + 18) -#define IRQ_TC11MP_PMU_CPU2 (IRQ_TC11MP_GIC_START + 19) -#define IRQ_TC11MP_PMU_CPU3 (IRQ_TC11MP_GIC_START + 20) -#define IRQ_TC11MP_PMU_SCU0 (IRQ_TC11MP_GIC_START + 21) -#define IRQ_TC11MP_PMU_SCU1 (IRQ_TC11MP_GIC_START + 22) -#define IRQ_TC11MP_PMU_SCU2 (IRQ_TC11MP_GIC_START + 23) -#define IRQ_TC11MP_PMU_SCU3 (IRQ_TC11MP_GIC_START + 24) -#define IRQ_TC11MP_PMU_SCU4 (IRQ_TC11MP_GIC_START + 25) -#define IRQ_TC11MP_PMU_SCU5 (IRQ_TC11MP_GIC_START + 26) -#define IRQ_TC11MP_PMU_SCU6 (IRQ_TC11MP_GIC_START + 27) -#define IRQ_TC11MP_PMU_SCU7 (IRQ_TC11MP_GIC_START + 28) - -#define IRQ_TC11MP_L220_EVENT (IRQ_TC11MP_GIC_START + 29) -#define IRQ_TC11MP_L220_SLAVE (IRQ_TC11MP_GIC_START + 30) -#define IRQ_TC11MP_L220_DECODE (IRQ_TC11MP_GIC_START + 31) - -/* - * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board) - */ -#define IRQ_PB11MP_WATCHDOG (IRQ_PB11MP_GIC_START + 0) /* Watchdog timer */ -#define IRQ_PB11MP_SOFT (IRQ_PB11MP_GIC_START + 1) /* Software interrupt */ -#define IRQ_PB11MP_COMMRx (IRQ_PB11MP_GIC_START + 2) /* Debug Comm Rx interrupt */ -#define IRQ_PB11MP_COMMTx (IRQ_PB11MP_GIC_START + 3) /* Debug Comm Tx interrupt */ -#define IRQ_PB11MP_GPIO0 (IRQ_PB11MP_GIC_START + 6) /* GPIO 0 */ -#define IRQ_PB11MP_GPIO1 (IRQ_PB11MP_GIC_START + 7) /* GPIO 1 */ -#define IRQ_PB11MP_GPIO2 (IRQ_PB11MP_GIC_START + 8) /* GPIO 2 */ - /* 9 reserved */ -#define IRQ_PB11MP_RTC_GIC1 (IRQ_PB11MP_GIC_START + 10) /* Real Time Clock */ -#define IRQ_PB11MP_SSP (IRQ_PB11MP_GIC_START + 11) /* Synchronous Serial Port */ -#define IRQ_PB11MP_UART0_GIC1 (IRQ_PB11MP_GIC_START + 12) /* UART 0 on development chip */ -#define IRQ_PB11MP_UART1_GIC1 (IRQ_PB11MP_GIC_START + 13) /* UART 1 on development chip */ -#define IRQ_PB11MP_UART2 (IRQ_PB11MP_GIC_START + 14) /* UART 2 on development chip */ -#define IRQ_PB11MP_UART3 (IRQ_PB11MP_GIC_START + 15) /* UART 3 on development chip */ -#define IRQ_PB11MP_SCI (IRQ_PB11MP_GIC_START + 16) /* Smart Card Interface */ -#define IRQ_PB11MP_MMCI0A_GIC1 (IRQ_PB11MP_GIC_START + 17) /* Multimedia Card 0A */ -#define IRQ_PB11MP_MMCI0B_GIC1 (IRQ_PB11MP_GIC_START + 18) /* Multimedia Card 0B */ -#define IRQ_PB11MP_AACI_GIC1 (IRQ_PB11MP_GIC_START + 19) /* Audio Codec */ -#define IRQ_PB11MP_KMI0_GIC1 (IRQ_PB11MP_GIC_START + 20) /* Keyboard/Mouse port 0 */ -#define IRQ_PB11MP_KMI1_GIC1 (IRQ_PB11MP_GIC_START + 21) /* Keyboard/Mouse port 1 */ -#define IRQ_PB11MP_CHARLCD (IRQ_PB11MP_GIC_START + 22) /* Character LCD */ -#define IRQ_PB11MP_CLCD (IRQ_PB11MP_GIC_START + 23) /* CLCD controller */ -#define IRQ_PB11MP_DMAC (IRQ_PB11MP_GIC_START + 24) /* DMA controller */ -#define IRQ_PB11MP_PWRFAIL (IRQ_PB11MP_GIC_START + 25) /* Power failure */ -#define IRQ_PB11MP_PISMO (IRQ_PB11MP_GIC_START + 26) /* PISMO interface */ -#define IRQ_PB11MP_DoC (IRQ_PB11MP_GIC_START + 27) /* Disk on Chip memory controller */ -#define IRQ_PB11MP_ETH_GIC1 (IRQ_PB11MP_GIC_START + 28) /* Ethernet controller */ -#define IRQ_PB11MP_USB_GIC1 (IRQ_PB11MP_GIC_START + 29) /* USB controller */ -#define IRQ_PB11MP_TSPEN (IRQ_PB11MP_GIC_START + 30) /* Touchscreen pen */ -#define IRQ_PB11MP_TSKPAD (IRQ_PB11MP_GIC_START + 31) /* Touchscreen keypad */ - -#endif /* __MACH_IRQS_PB11MP_H */ diff --git a/arch/arm/mach-realview/irqs-pba8.h b/arch/arm/mach-realview/irqs-pba8.h deleted file mode 100644 index 262e321938b8..000000000000 --- a/arch/arm/mach-realview/irqs-pba8.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * Copyright (C) 2008 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __MACH_IRQS_PBA8_H -#define __MACH_IRQS_PBA8_H - -#define IRQ_PBA8_GIC_START 32 - -/* - * PB-A8 on-board gic irq sources - */ -#define IRQ_PBA8_WATCHDOG (IRQ_PBA8_GIC_START + 0) /* Watchdog timer */ -#define IRQ_PBA8_SOFT (IRQ_PBA8_GIC_START + 1) /* Software interrupt */ -#define IRQ_PBA8_COMMRx (IRQ_PBA8_GIC_START + 2) /* Debug Comm Rx interrupt */ -#define IRQ_PBA8_COMMTx (IRQ_PBA8_GIC_START + 3) /* Debug Comm Tx interrupt */ -#define IRQ_PBA8_TIMER0_1 (IRQ_PBA8_GIC_START + 4) /* Timer 0/1 (default timer) */ -#define IRQ_PBA8_TIMER2_3 (IRQ_PBA8_GIC_START + 5) /* Timer 2/3 */ -#define IRQ_PBA8_GPIO0 (IRQ_PBA8_GIC_START + 6) /* GPIO 0 */ -#define IRQ_PBA8_GPIO1 (IRQ_PBA8_GIC_START + 7) /* GPIO 1 */ -#define IRQ_PBA8_GPIO2 (IRQ_PBA8_GIC_START + 8) /* GPIO 2 */ - /* 9 reserved */ -#define IRQ_PBA8_RTC (IRQ_PBA8_GIC_START + 10) /* Real Time Clock */ -#define IRQ_PBA8_SSP (IRQ_PBA8_GIC_START + 11) /* Synchronous Serial Port */ -#define IRQ_PBA8_UART0 (IRQ_PBA8_GIC_START + 12) /* UART 0 on development chip */ -#define IRQ_PBA8_UART1 (IRQ_PBA8_GIC_START + 13) /* UART 1 on development chip */ -#define IRQ_PBA8_UART2 (IRQ_PBA8_GIC_START + 14) /* UART 2 on development chip */ -#define IRQ_PBA8_UART3 (IRQ_PBA8_GIC_START + 15) /* UART 3 on development chip */ -#define IRQ_PBA8_SCI (IRQ_PBA8_GIC_START + 16) /* Smart Card Interface */ -#define IRQ_PBA8_MMCI0A (IRQ_PBA8_GIC_START + 17) /* Multimedia Card 0A */ -#define IRQ_PBA8_MMCI0B (IRQ_PBA8_GIC_START + 18) /* Multimedia Card 0B */ -#define IRQ_PBA8_AACI (IRQ_PBA8_GIC_START + 19) /* Audio Codec */ -#define IRQ_PBA8_KMI0 (IRQ_PBA8_GIC_START + 20) /* Keyboard/Mouse port 0 */ -#define IRQ_PBA8_KMI1 (IRQ_PBA8_GIC_START + 21) /* Keyboard/Mouse port 1 */ -#define IRQ_PBA8_CHARLCD (IRQ_PBA8_GIC_START + 22) /* Character LCD */ -#define IRQ_PBA8_CLCD (IRQ_PBA8_GIC_START + 23) /* CLCD controller */ -#define IRQ_PBA8_DMAC (IRQ_PBA8_GIC_START + 24) /* DMA controller */ -#define IRQ_PBA8_PWRFAIL (IRQ_PBA8_GIC_START + 25) /* Power failure */ -#define IRQ_PBA8_PISMO (IRQ_PBA8_GIC_START + 26) /* PISMO interface */ -#define IRQ_PBA8_DoC (IRQ_PBA8_GIC_START + 27) /* Disk on Chip memory controller */ -#define IRQ_PBA8_ETH (IRQ_PBA8_GIC_START + 28) /* Ethernet controller */ -#define IRQ_PBA8_USB (IRQ_PBA8_GIC_START + 29) /* USB controller */ -#define IRQ_PBA8_TSPEN (IRQ_PBA8_GIC_START + 30) /* Touchscreen pen */ -#define IRQ_PBA8_TSKPAD (IRQ_PBA8_GIC_START + 31) /* Touchscreen keypad */ - -#define IRQ_PBA8_PMU (IRQ_PBA8_GIC_START + 47) /* Cortex-A8 PMU */ - -/* ... */ -#define IRQ_PBA8_PCI0 (IRQ_PBA8_GIC_START + 50) -#define IRQ_PBA8_PCI1 (IRQ_PBA8_GIC_START + 51) -#define IRQ_PBA8_PCI2 (IRQ_PBA8_GIC_START + 52) -#define IRQ_PBA8_PCI3 (IRQ_PBA8_GIC_START + 53) - -#define IRQ_PBA8_SMC -1 -#define IRQ_PBA8_SCTL -1 - -#endif /* __MACH_IRQS_PBA8_H */ diff --git a/arch/arm/mach-realview/irqs-pbx.h b/arch/arm/mach-realview/irqs-pbx.h deleted file mode 100644 index 4ef0567dec32..000000000000 --- a/arch/arm/mach-realview/irqs-pbx.h +++ /dev/null @@ -1,87 +0,0 @@ -/* - * Copyright (C) 2009 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __MACH_IRQS_PBX_H -#define __MACH_IRQS_PBX_H - -#define IRQ_LOCALTIMER 29 -#define IRQ_PBX_GIC_START 32 - -/* - * PBX on-board gic irq sources - */ -#define IRQ_PBX_WATCHDOG (IRQ_PBX_GIC_START + 0) /* Watchdog timer */ -#define IRQ_PBX_SOFT (IRQ_PBX_GIC_START + 1) /* Software interrupt */ -#define IRQ_PBX_COMMRx (IRQ_PBX_GIC_START + 2) /* Debug Comm Rx interrupt */ -#define IRQ_PBX_COMMTx (IRQ_PBX_GIC_START + 3) /* Debug Comm Tx interrupt */ -#define IRQ_PBX_TIMER0_1 (IRQ_PBX_GIC_START + 4) /* Timer 0/1 (default timer) */ -#define IRQ_PBX_TIMER2_3 (IRQ_PBX_GIC_START + 5) /* Timer 2/3 */ -#define IRQ_PBX_GPIO0 (IRQ_PBX_GIC_START + 6) /* GPIO 0 */ -#define IRQ_PBX_GPIO1 (IRQ_PBX_GIC_START + 7) /* GPIO 1 */ -#define IRQ_PBX_GPIO2 (IRQ_PBX_GIC_START + 8) /* GPIO 2 */ - /* 9 reserved */ -#define IRQ_PBX_RTC (IRQ_PBX_GIC_START + 10) /* Real Time Clock */ -#define IRQ_PBX_SSP (IRQ_PBX_GIC_START + 11) /* Synchronous Serial Port */ -#define IRQ_PBX_UART0 (IRQ_PBX_GIC_START + 12) /* UART 0 on development chip */ -#define IRQ_PBX_UART1 (IRQ_PBX_GIC_START + 13) /* UART 1 on development chip */ -#define IRQ_PBX_UART2 (IRQ_PBX_GIC_START + 14) /* UART 2 on development chip */ -#define IRQ_PBX_UART3 (IRQ_PBX_GIC_START + 15) /* UART 3 on development chip */ -#define IRQ_PBX_SCI (IRQ_PBX_GIC_START + 16) /* Smart Card Interface */ -#define IRQ_PBX_MMCI0A (IRQ_PBX_GIC_START + 17) /* Multimedia Card 0A */ -#define IRQ_PBX_MMCI0B (IRQ_PBX_GIC_START + 18) /* Multimedia Card 0B */ -#define IRQ_PBX_AACI (IRQ_PBX_GIC_START + 19) /* Audio Codec */ -#define IRQ_PBX_KMI0 (IRQ_PBX_GIC_START + 20) /* Keyboard/Mouse port 0 */ -#define IRQ_PBX_KMI1 (IRQ_PBX_GIC_START + 21) /* Keyboard/Mouse port 1 */ -#define IRQ_PBX_CHARLCD (IRQ_PBX_GIC_START + 22) /* Character LCD */ -#define IRQ_PBX_CLCD (IRQ_PBX_GIC_START + 23) /* CLCD controller */ -#define IRQ_PBX_DMAC (IRQ_PBX_GIC_START + 24) /* DMA controller */ -#define IRQ_PBX_PWRFAIL (IRQ_PBX_GIC_START + 25) /* Power failure */ -#define IRQ_PBX_PISMO (IRQ_PBX_GIC_START + 26) /* PISMO interface */ -#define IRQ_PBX_DoC (IRQ_PBX_GIC_START + 27) /* Disk on Chip memory controller */ -#define IRQ_PBX_ETH (IRQ_PBX_GIC_START + 28) /* Ethernet controller */ -#define IRQ_PBX_USB (IRQ_PBX_GIC_START + 29) /* USB controller */ -#define IRQ_PBX_TSPEN (IRQ_PBX_GIC_START + 30) /* Touchscreen pen */ -#define IRQ_PBX_TSKPAD (IRQ_PBX_GIC_START + 31) /* Touchscreen keypad */ - -#define IRQ_PBX_PMU_SCU0 (IRQ_PBX_GIC_START + 32) /* SCU PMU Interrupts (11mp) */ -#define IRQ_PBX_PMU_SCU1 (IRQ_PBX_GIC_START + 33) -#define IRQ_PBX_PMU_SCU2 (IRQ_PBX_GIC_START + 34) -#define IRQ_PBX_PMU_SCU3 (IRQ_PBX_GIC_START + 35) -#define IRQ_PBX_PMU_SCU4 (IRQ_PBX_GIC_START + 36) -#define IRQ_PBX_PMU_SCU5 (IRQ_PBX_GIC_START + 37) -#define IRQ_PBX_PMU_SCU6 (IRQ_PBX_GIC_START + 38) -#define IRQ_PBX_PMU_SCU7 (IRQ_PBX_GIC_START + 39) - -#define IRQ_PBX_WATCHDOG1 (IRQ_PBX_GIC_START + 40) /* Watchdog1 timer */ -#define IRQ_PBX_TIMER4_5 (IRQ_PBX_GIC_START + 41) /* Timer 0/1 (default timer) */ -#define IRQ_PBX_TIMER6_7 (IRQ_PBX_GIC_START + 42) /* Timer 2/3 */ -/* ... */ -#define IRQ_PBX_PMU_CPU0 (IRQ_PBX_GIC_START + 44) /* CPU PMU Interrupts */ -#define IRQ_PBX_PMU_CPU1 (IRQ_PBX_GIC_START + 45) -#define IRQ_PBX_PMU_CPU2 (IRQ_PBX_GIC_START + 46) -#define IRQ_PBX_PMU_CPU3 (IRQ_PBX_GIC_START + 47) - -/* ... */ -#define IRQ_PBX_PCI0 (IRQ_PBX_GIC_START + 50) -#define IRQ_PBX_PCI1 (IRQ_PBX_GIC_START + 51) -#define IRQ_PBX_PCI2 (IRQ_PBX_GIC_START + 52) -#define IRQ_PBX_PCI3 (IRQ_PBX_GIC_START + 53) - -#define IRQ_PBX_SMC -1 -#define IRQ_PBX_SCTL -1 - -#endif /* __MACH_IRQS_PBX_H */ diff --git a/arch/arm/mach-realview/platform.h b/arch/arm/mach-realview/platform.h deleted file mode 100644 index 11121739d371..000000000000 --- a/arch/arm/mach-realview/platform.h +++ /dev/null @@ -1,247 +0,0 @@ -/* - * Copyright (c) ARM Limited 2003. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_PLATFORM_H -#define __ASM_ARCH_PLATFORM_H - -/* - * Memory definitions - */ -#define REALVIEW_BOOT_ROM_LO 0x30000000 /* DoC Base (64Mb)...*/ -#define REALVIEW_BOOT_ROM_HI 0x30000000 -#define REALVIEW_BOOT_ROM_BASE REALVIEW_BOOT_ROM_HI /* Normal position */ -#define REALVIEW_BOOT_ROM_SIZE SZ_64M - -#define REALVIEW_SSRAM_BASE /* REALVIEW_SSMC_BASE ? */ -#define REALVIEW_SSRAM_SIZE SZ_2M - -/* - * SDRAM - */ -#define REALVIEW_SDRAM_BASE 0x00000000 - -/* - * Logic expansion modules - * - */ - - -/* ------------------------------------------------------------------------ - * RealView Registers - * ------------------------------------------------------------------------ - * - */ -#define REALVIEW_SYS_ID_OFFSET 0x00 -#define REALVIEW_SYS_SW_OFFSET 0x04 -#define REALVIEW_SYS_LED_OFFSET 0x08 -#define REALVIEW_SYS_OSC0_OFFSET 0x0C - -#define REALVIEW_SYS_OSC1_OFFSET 0x10 -#define REALVIEW_SYS_OSC2_OFFSET 0x14 -#define REALVIEW_SYS_OSC3_OFFSET 0x18 -#define REALVIEW_SYS_OSC4_OFFSET 0x1C /* OSC1 for RealView/AB */ - -#define REALVIEW_SYS_LOCK_OFFSET 0x20 -#define REALVIEW_SYS_100HZ_OFFSET 0x24 -#define REALVIEW_SYS_CFGDATA1_OFFSET 0x28 -#define REALVIEW_SYS_CFGDATA2_OFFSET 0x2C -#define REALVIEW_SYS_FLAGS_OFFSET 0x30 -#define REALVIEW_SYS_FLAGSSET_OFFSET 0x30 -#define REALVIEW_SYS_FLAGSCLR_OFFSET 0x34 -#define REALVIEW_SYS_NVFLAGS_OFFSET 0x38 -#define REALVIEW_SYS_NVFLAGSSET_OFFSET 0x38 -#define REALVIEW_SYS_NVFLAGSCLR_OFFSET 0x3C -#define REALVIEW_SYS_RESETCTL_OFFSET 0x40 -#define REALVIEW_SYS_PCICTL_OFFSET 0x44 -#define REALVIEW_SYS_MCI_OFFSET 0x48 -#define REALVIEW_SYS_FLASH_OFFSET 0x4C -#define REALVIEW_SYS_CLCD_OFFSET 0x50 -#define REALVIEW_SYS_CLCDSER_OFFSET 0x54 -#define REALVIEW_SYS_BOOTCS_OFFSET 0x58 -#define REALVIEW_SYS_24MHz_OFFSET 0x5C -#define REALVIEW_SYS_MISC_OFFSET 0x60 -#define REALVIEW_SYS_IOSEL_OFFSET 0x70 -#define REALVIEW_SYS_PROCID_OFFSET 0x84 -#define REALVIEW_SYS_TEST_OSC0_OFFSET 0xC0 -#define REALVIEW_SYS_TEST_OSC1_OFFSET 0xC4 -#define REALVIEW_SYS_TEST_OSC2_OFFSET 0xC8 -#define REALVIEW_SYS_TEST_OSC3_OFFSET 0xCC -#define REALVIEW_SYS_TEST_OSC4_OFFSET 0xD0 - -#define REALVIEW_SYS_BASE 0x10000000 -#define REALVIEW_SYS_ID (REALVIEW_SYS_BASE + REALVIEW_SYS_ID_OFFSET) -#define REALVIEW_SYS_SW (REALVIEW_SYS_BASE + REALVIEW_SYS_SW_OFFSET) -#define REALVIEW_SYS_LED (REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET) -#define REALVIEW_SYS_OSC0 (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC0_OFFSET) -#define REALVIEW_SYS_OSC1 (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC1_OFFSET) - -#define REALVIEW_SYS_LOCK (REALVIEW_SYS_BASE + REALVIEW_SYS_LOCK_OFFSET) -#define REALVIEW_SYS_100HZ (REALVIEW_SYS_BASE + REALVIEW_SYS_100HZ_OFFSET) -#define REALVIEW_SYS_CFGDATA1 (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA1_OFFSET) -#define REALVIEW_SYS_CFGDATA2 (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA2_OFFSET) -#define REALVIEW_SYS_FLAGS (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGS_OFFSET) -#define REALVIEW_SYS_FLAGSSET (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSSET_OFFSET) -#define REALVIEW_SYS_FLAGSCLR (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSCLR_OFFSET) -#define REALVIEW_SYS_NVFLAGS (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGS_OFFSET) -#define REALVIEW_SYS_NVFLAGSSET (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSSET_OFFSET) -#define REALVIEW_SYS_NVFLAGSCLR (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSCLR_OFFSET) -#define REALVIEW_SYS_RESETCTL (REALVIEW_SYS_BASE + REALVIEW_SYS_RESETCTL_OFFSET) -#define REALVIEW_SYS_PCICTL (REALVIEW_SYS_BASE + REALVIEW_SYS_PCICTL_OFFSET) -#define REALVIEW_SYS_MCI (REALVIEW_SYS_BASE + REALVIEW_SYS_MCI_OFFSET) -#define REALVIEW_SYS_FLASH (REALVIEW_SYS_BASE + REALVIEW_SYS_FLASH_OFFSET) -#define REALVIEW_SYS_CLCD (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCD_OFFSET) -#define REALVIEW_SYS_CLCDSER (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCDSER_OFFSET) -#define REALVIEW_SYS_BOOTCS (REALVIEW_SYS_BASE + REALVIEW_SYS_BOOTCS_OFFSET) -#define REALVIEW_SYS_24MHz (REALVIEW_SYS_BASE + REALVIEW_SYS_24MHz_OFFSET) -#define REALVIEW_SYS_MISC (REALVIEW_SYS_BASE + REALVIEW_SYS_MISC_OFFSET) -#define REALVIEW_SYS_IOSEL (REALVIEW_SYS_BASE + REALVIEW_SYS_IOSEL_OFFSET) -#define REALVIEW_SYS_PROCID (REALVIEW_SYS_BASE + REALVIEW_SYS_PROCID_OFFSET) -#define REALVIEW_SYS_TEST_OSC0 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC0_OFFSET) -#define REALVIEW_SYS_TEST_OSC1 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC1_OFFSET) -#define REALVIEW_SYS_TEST_OSC2 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC2_OFFSET) -#define REALVIEW_SYS_TEST_OSC3 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC3_OFFSET) -#define REALVIEW_SYS_TEST_OSC4 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC4_OFFSET) - -/* ------------------------------------------------------------------------ - * RealView control registers - * ------------------------------------------------------------------------ - */ - -/* - * REALVIEW_IDFIELD - * - * 31:24 = manufacturer (0x41 = ARM) - * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus) - * 15:12 = FPGA (0x3 = XVC600 or XVC600E) - * 11:4 = build value - * 3:0 = revision number (0x1 = rev B (AHB)) - */ - -/* - * REALVIEW_SYS_LOCK - * control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, - * SYS_CLD, SYS_BOOTCS - */ -#define REALVIEW_SYS_LOCK_LOCKED (1 << 16) -#define REALVIEW_SYS_LOCK_VAL 0xA05F /* Enable write access */ - -/* - * REALVIEW_SYS_FLASH - */ -#define REALVIEW_FLASHPROG_FLVPPEN (1 << 0) /* Enable writing to flash */ - -/* - * REALVIEW_INTREG - * - used to acknowledge and control MMCI and UART interrupts - */ -#define REALVIEW_INTREG_WPROT 0x00 /* MMC protection status (no interrupt generated) */ -#define REALVIEW_INTREG_RI0 0x01 /* Ring indicator UART0 is asserted, */ -#define REALVIEW_INTREG_CARDIN 0x08 /* MMCI card in detect */ - /* write 1 to acknowledge and clear */ -#define REALVIEW_INTREG_RI1 0x02 /* Ring indicator UART1 is asserted, */ -#define REALVIEW_INTREG_CARDINSERT 0x03 /* Signal insertion of MMC card */ - -/* - * RealView common peripheral addresses - */ -#define REALVIEW_SCTL_BASE 0x10001000 /* System controller */ -#define REALVIEW_I2C_BASE 0x10002000 /* I2C control */ -#define REALVIEW_AACI_BASE 0x10004000 /* Audio */ -#define REALVIEW_MMCI0_BASE 0x10005000 /* MMC interface */ -#define REALVIEW_KMI0_BASE 0x10006000 /* KMI interface */ -#define REALVIEW_KMI1_BASE 0x10007000 /* KMI 2nd interface */ -#define REALVIEW_CHAR_LCD_BASE 0x10008000 /* Character LCD */ -#define REALVIEW_SCI_BASE 0x1000E000 /* Smart card controller */ -#define REALVIEW_GPIO1_BASE 0x10014000 /* GPIO port 1 */ -#define REALVIEW_GPIO2_BASE 0x10015000 /* GPIO port 2 */ -#define REALVIEW_DMC_BASE 0x10018000 /* DMC configuration */ -#define REALVIEW_DMAC_BASE 0x10030000 /* DMA controller */ - -/* PCI space */ -#define REALVIEW_PCI_BASE 0x41000000 /* PCI Interface */ -#define REALVIEW_PCI_CFG_BASE 0x42000000 -#define REALVIEW_PCI_MEM_BASE0 0x44000000 -#define REALVIEW_PCI_MEM_BASE1 0x50000000 -#define REALVIEW_PCI_MEM_BASE2 0x60000000 -/* Sizes of above maps */ -#define REALVIEW_PCI_BASE_SIZE 0x01000000 -#define REALVIEW_PCI_CFG_BASE_SIZE 0x02000000 -#define REALVIEW_PCI_MEM_BASE0_SIZE 0x0c000000 /* 32Mb */ -#define REALVIEW_PCI_MEM_BASE1_SIZE 0x10000000 /* 256Mb */ -#define REALVIEW_PCI_MEM_BASE2_SIZE 0x10000000 /* 256Mb */ - -#define REALVIEW_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */ -#define REALVIEW_LT_BASE 0x80000000 /* Logic Tile expansion */ - -/* - * CompactFlash - */ -#define REALVIEW_CF_BASE 0x18000000 /* CompactFlash */ -#define REALVIEW_CF_MEM_BASE 0x18003000 /* SMC for CompactFlash */ - -/* - * Disk on Chip - */ -#define REALVIEW_DOC_BASE 0x2C000000 -#define REALVIEW_DOC_SIZE (16 << 20) -#define REALVIEW_DOC_PAGE_SIZE 512 -#define REALVIEW_DOC_TOTAL_PAGES (DOC_SIZE / PAGE_SIZE) - -#define ERASE_UNIT_PAGES 32 -#define START_PAGE 0x80 - -/* - * LED settings, bits [7:0] - */ -#define REALVIEW_SYS_LED0 (1 << 0) -#define REALVIEW_SYS_LED1 (1 << 1) -#define REALVIEW_SYS_LED2 (1 << 2) -#define REALVIEW_SYS_LED3 (1 << 3) -#define REALVIEW_SYS_LED4 (1 << 4) -#define REALVIEW_SYS_LED5 (1 << 5) -#define REALVIEW_SYS_LED6 (1 << 6) -#define REALVIEW_SYS_LED7 (1 << 7) - -#define ALL_LEDS 0xFF - -#define LED_BANK REALVIEW_SYS_LED - -/* - * Control registers - */ -#define REALVIEW_IDFIELD_OFFSET 0x0 /* RealView build information */ -#define REALVIEW_FLASHPROG_OFFSET 0x4 /* Flash devices */ -#define REALVIEW_INTREG_OFFSET 0x8 /* Interrupt control */ -#define REALVIEW_DECODE_OFFSET 0xC /* Fitted logic modules */ - -/* - * System controller bit assignment - */ -#define REALVIEW_REFCLK 0 -#define REALVIEW_TIMCLK 1 - -#define REALVIEW_TIMER1_EnSel 15 -#define REALVIEW_TIMER2_EnSel 17 -#define REALVIEW_TIMER3_EnSel 19 -#define REALVIEW_TIMER4_EnSel 21 - - -#define REALVIEW_CSR_BASE 0x10000000 -#define REALVIEW_CSR_SIZE 0x10000000 - -#endif /* __ASM_ARCH_PLATFORM_H */ diff --git a/arch/arm/mach-realview/platsmp-dt.c b/arch/arm/mach-realview/platsmp-dt.c index 6964e8876061..70ca99eb52c6 100644 --- a/arch/arm/mach-realview/platsmp-dt.c +++ b/arch/arm/mach-realview/platsmp-dt.c @@ -17,8 +17,7 @@ #include <asm/smp_scu.h> #include <plat/platsmp.h> - -#include "core.h" +#include "hotplug.h" #define REALVIEW_SYS_FLAGSSET_OFFSET 0x30 diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c deleted file mode 100644 index e8ab69c7abfb..000000000000 --- a/arch/arm/mach-realview/platsmp.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * linux/arch/arm/mach-realview/platsmp.c - * - * Copyright (C) 2002 ARM Ltd. - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/smp.h> -#include <linux/io.h> - -#include "hardware.h" -#include <asm/mach-types.h> -#include <asm/smp_scu.h> - -#include "board-eb.h" -#include "board-pb11mp.h" -#include "board-pbx.h" - -#include <plat/platsmp.h> - -#include "core.h" - -static void __iomem *scu_base_addr(void) -{ - if (machine_is_realview_eb_mp()) - return __io_address(REALVIEW_EB11MP_SCU_BASE); - else if (machine_is_realview_pb11mp()) - return __io_address(REALVIEW_TC11MP_SCU_BASE); - else if (machine_is_realview_pbx() && - (core_tile_pbx11mp() || core_tile_pbxa9mp())) - return __io_address(REALVIEW_PBX_TILE_SCU_BASE); - else - return (void __iomem *)0; -} - -/* - * Initialise the CPU possible map early - this describes the CPUs - * which may be present or become present in the system. - */ -static void __init realview_smp_init_cpus(void) -{ - void __iomem *scu_base = scu_base_addr(); - unsigned int i, ncores; - - ncores = scu_base ? scu_get_core_count(scu_base) : 1; - - /* sanity check */ - if (ncores > nr_cpu_ids) { - pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", - ncores, nr_cpu_ids); - ncores = nr_cpu_ids; - } - - for (i = 0; i < ncores; i++) - set_cpu_possible(i, true); -} - -static void __init realview_smp_prepare_cpus(unsigned int max_cpus) -{ - - scu_enable(scu_base_addr()); - - /* - * Write the address of secondary startup into the - * system-wide flags register. The BootMonitor waits - * until it receives a soft interrupt, and then the - * secondary CPU branches to this address. - */ - __raw_writel(virt_to_phys(versatile_secondary_startup), - __io_address(REALVIEW_SYS_FLAGSSET)); -} - -const struct smp_operations realview_smp_ops __initconst = { - .smp_init_cpus = realview_smp_init_cpus, - .smp_prepare_cpus = realview_smp_prepare_cpus, - .smp_secondary_init = versatile_secondary_init, - .smp_boot_secondary = versatile_boot_secondary, -#ifdef CONFIG_HOTPLUG_CPU - .cpu_die = realview_cpu_die, -#endif -}; diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c deleted file mode 100644 index b442fa61e943..000000000000 --- a/arch/arm/mach-realview/realview_eb.c +++ /dev/null @@ -1,492 +0,0 @@ -/* - * linux/arch/arm/mach-realview/realview_eb.c - * - * Copyright (C) 2004 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/device.h> -#include <linux/amba/bus.h> -#include <linux/amba/pl061.h> -#include <linux/amba/mmci.h> -#include <linux/amba/pl022.h> -#include <linux/io.h> -#include <linux/irqchip/arm-gic.h> -#include <linux/platform_data/clk-realview.h> -#include <linux/reboot.h> - -#include "hardware.h" -#include <asm/irq.h> -#include <asm/mach-types.h> -#include <asm/pgtable.h> -#include <asm/hardware/cache-l2x0.h> -#include <asm/smp_twd.h> -#include <asm/system_info.h> -#include <asm/outercache.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/time.h> - -#include "board-eb.h" -#include "irqs-eb.h" - -#include "core.h" - -static struct map_desc realview_eb_io_desc[] __initdata = { - { - .virtual = IO_ADDRESS(REALVIEW_SYS_BASE), - .pfn = __phys_to_pfn(REALVIEW_SYS_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_EB_GIC_CPU_BASE), - .pfn = __phys_to_pfn(REALVIEW_EB_GIC_CPU_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_EB_GIC_DIST_BASE), - .pfn = __phys_to_pfn(REALVIEW_EB_GIC_DIST_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_SCTL_BASE), - .pfn = __phys_to_pfn(REALVIEW_SCTL_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_EB_TIMER0_1_BASE), - .pfn = __phys_to_pfn(REALVIEW_EB_TIMER0_1_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_EB_TIMER2_3_BASE), - .pfn = __phys_to_pfn(REALVIEW_EB_TIMER2_3_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, -#ifdef CONFIG_DEBUG_LL - { - .virtual = IO_ADDRESS(REALVIEW_EB_UART0_BASE), - .pfn = __phys_to_pfn(REALVIEW_EB_UART0_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - } -#endif -}; - -static struct map_desc realview_eb11mp_io_desc[] __initdata = { - { - .virtual = IO_ADDRESS(REALVIEW_EB11MP_PRIV_MEM_BASE), - .pfn = __phys_to_pfn(REALVIEW_EB11MP_PRIV_MEM_BASE), - .length = REALVIEW_EB11MP_PRIV_MEM_SIZE, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_EB11MP_L220_BASE), - .pfn = __phys_to_pfn(REALVIEW_EB11MP_L220_BASE), - .length = SZ_8K, - .type = MT_DEVICE, - } -}; - -static void __init realview_eb_map_io(void) -{ - iotable_init(realview_eb_io_desc, ARRAY_SIZE(realview_eb_io_desc)); - if (core_tile_eb11mp() || core_tile_a9mp()) - iotable_init(realview_eb11mp_io_desc, ARRAY_SIZE(realview_eb11mp_io_desc)); -} - -static struct pl061_platform_data gpio0_plat_data = { - .gpio_base = 0, -}; - -static struct pl061_platform_data gpio1_plat_data = { - .gpio_base = 8, -}; - -static struct pl061_platform_data gpio2_plat_data = { - .gpio_base = 16, -}; - -static struct pl022_ssp_controller ssp0_plat_data = { - .bus_id = 0, - .enable_dma = 0, - .num_chipselect = 1, -}; - -/* - * RealView EB AMBA devices - */ - -/* - * These devices are connected via the core APB bridge - */ -#define GPIO2_IRQ { IRQ_EB_GPIO2 } -#define GPIO3_IRQ { IRQ_EB_GPIO3 } - -#define AACI_IRQ { IRQ_EB_AACI } -#define MMCI0_IRQ { IRQ_EB_MMCI0A, IRQ_EB_MMCI0B } -#define KMI0_IRQ { IRQ_EB_KMI0 } -#define KMI1_IRQ { IRQ_EB_KMI1 } - -/* - * These devices are connected directly to the multi-layer AHB switch - */ -#define EB_SMC_IRQ { } -#define MPMC_IRQ { } -#define EB_CLCD_IRQ { IRQ_EB_CLCD } -#define DMAC_IRQ { IRQ_EB_DMA } - -/* - * These devices are connected via the core APB bridge - */ -#define SCTL_IRQ { } -#define EB_WATCHDOG_IRQ { IRQ_EB_WDOG } -#define EB_GPIO0_IRQ { IRQ_EB_GPIO0 } -#define GPIO1_IRQ { IRQ_EB_GPIO1 } -#define EB_RTC_IRQ { IRQ_EB_RTC } - -/* - * These devices are connected via the DMA APB bridge - */ -#define SCI_IRQ { IRQ_EB_SCI } -#define EB_UART0_IRQ { IRQ_EB_UART0 } -#define EB_UART1_IRQ { IRQ_EB_UART1 } -#define EB_UART2_IRQ { IRQ_EB_UART2 } -#define EB_UART3_IRQ { IRQ_EB_UART3 } -#define EB_SSP_IRQ { IRQ_EB_SSP } - -/* FPGA Primecells */ -APB_DEVICE(aaci, "fpga:aaci", AACI, NULL); -APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); -APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); -APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); -APB_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL); - -/* DevChip Primecells */ -AHB_DEVICE(smc, "dev:smc", EB_SMC, NULL); -AHB_DEVICE(clcd, "dev:clcd", EB_CLCD, &clcd_plat_data); -AHB_DEVICE(dmac, "dev:dmac", DMAC, NULL); -AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL); -APB_DEVICE(wdog, "dev:wdog", EB_WATCHDOG, NULL); -APB_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data); -APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); -APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); -APB_DEVICE(rtc, "dev:rtc", EB_RTC, NULL); -APB_DEVICE(sci0, "dev:sci0", SCI, NULL); -APB_DEVICE(uart0, "dev:uart0", EB_UART0, NULL); -APB_DEVICE(uart1, "dev:uart1", EB_UART1, NULL); -APB_DEVICE(uart2, "dev:uart2", EB_UART2, NULL); -APB_DEVICE(ssp0, "dev:ssp0", EB_SSP, &ssp0_plat_data); - -static struct amba_device *amba_devs[] __initdata = { - &dmac_device, - &uart0_device, - &uart1_device, - &uart2_device, - &uart3_device, - &smc_device, - &clcd_device, - &sctl_device, - &wdog_device, - &gpio0_device, - &gpio1_device, - &gpio2_device, - &rtc_device, - &sci0_device, - &ssp0_device, - &aaci_device, - &mmc0_device, - &kmi0_device, - &kmi1_device, -}; - -/* - * RealView EB platform devices - */ -static struct resource realview_eb_flash_resource = { - .start = REALVIEW_EB_FLASH_BASE, - .end = REALVIEW_EB_FLASH_BASE + REALVIEW_EB_FLASH_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -static struct resource realview_eb_eth_resources[] = { - [0] = { - .start = REALVIEW_EB_ETH_BASE, - .end = REALVIEW_EB_ETH_BASE + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_EB_ETH, - .end = IRQ_EB_ETH, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - }, -}; - -/* - * Detect and register the correct Ethernet device. RealView/EB rev D - * platforms use the newer SMSC LAN9118 Ethernet chip - */ -static int eth_device_register(void) -{ - void __iomem *eth_addr = ioremap(REALVIEW_EB_ETH_BASE, SZ_4K); - const char *name = NULL; - u32 idrev; - - if (!eth_addr) - return -ENOMEM; - - idrev = readl(eth_addr + 0x50); - if ((idrev & 0xFFFF0000) != 0x01180000) - /* SMSC LAN9118 not present, use LAN91C111 instead */ - name = "smc91x"; - - iounmap(eth_addr); - return realview_eth_register(name, realview_eb_eth_resources); -} - -static struct resource realview_eb_isp1761_resources[] = { - [0] = { - .start = REALVIEW_EB_USB_BASE, - .end = REALVIEW_EB_USB_BASE + SZ_128K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_EB_USB, - .end = IRQ_EB_USB, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource pmu_resources[] = { - [0] = { - .start = IRQ_EB11MP_PMU_CPU0, - .end = IRQ_EB11MP_PMU_CPU0, - .flags = IORESOURCE_IRQ, - }, - [1] = { - .start = IRQ_EB11MP_PMU_CPU1, - .end = IRQ_EB11MP_PMU_CPU1, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_EB11MP_PMU_CPU2, - .end = IRQ_EB11MP_PMU_CPU2, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = IRQ_EB11MP_PMU_CPU3, - .end = IRQ_EB11MP_PMU_CPU3, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device pmu_device = { - .id = -1, - .num_resources = ARRAY_SIZE(pmu_resources), - .resource = pmu_resources, -}; - -static struct resource char_lcd_resources[] = { - { - .start = REALVIEW_CHAR_LCD_BASE, - .end = (REALVIEW_CHAR_LCD_BASE + SZ_4K - 1), - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_EB_CHARLCD, - .end = IRQ_EB_CHARLCD, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device char_lcd_device = { - .name = "arm-charlcd", - .id = -1, - .num_resources = ARRAY_SIZE(char_lcd_resources), - .resource = char_lcd_resources, -}; - -static void __init gic_init_irq(void) -{ - if (core_tile_eb11mp() || core_tile_a9mp()) { - unsigned int pldctrl; - - /* new irq mode */ - writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK)); - pldctrl = readl(__io_address(REALVIEW_SYS_BASE) + REALVIEW_EB11MP_SYS_PLD_CTRL1); - pldctrl |= 0x00800000; - writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + REALVIEW_EB11MP_SYS_PLD_CTRL1); - writel(0x00000000, __io_address(REALVIEW_SYS_LOCK)); - - /* core tile GIC, primary */ - gic_init(0, 29, __io_address(REALVIEW_EB11MP_GIC_DIST_BASE), - __io_address(REALVIEW_EB11MP_GIC_CPU_BASE)); - -#ifndef CONFIG_REALVIEW_EB_ARM11MP_REVB - /* board GIC, secondary */ - gic_init(1, 96, __io_address(REALVIEW_EB_GIC_DIST_BASE), - __io_address(REALVIEW_EB_GIC_CPU_BASE)); - gic_cascade_irq(1, IRQ_EB11MP_EB_IRQ1); -#endif - } else { - /* board GIC, primary */ - gic_init(0, 29, __io_address(REALVIEW_EB_GIC_DIST_BASE), - __io_address(REALVIEW_EB_GIC_CPU_BASE)); - } -} - -/* - * Fix up the IRQ numbers for the RealView EB/ARM11MPCore tile - */ -static void realview_eb11mp_fixup(void) -{ - /* AMBA devices */ - dmac_device.irq[0] = IRQ_EB11MP_DMA; - uart0_device.irq[0] = IRQ_EB11MP_UART0; - uart1_device.irq[0] = IRQ_EB11MP_UART1; - uart2_device.irq[0] = IRQ_EB11MP_UART2; - uart3_device.irq[0] = IRQ_EB11MP_UART3; - clcd_device.irq[0] = IRQ_EB11MP_CLCD; - wdog_device.irq[0] = IRQ_EB11MP_WDOG; - gpio0_device.irq[0] = IRQ_EB11MP_GPIO0; - gpio1_device.irq[0] = IRQ_EB11MP_GPIO1; - gpio2_device.irq[0] = IRQ_EB11MP_GPIO2; - rtc_device.irq[0] = IRQ_EB11MP_RTC; - sci0_device.irq[0] = IRQ_EB11MP_SCI; - ssp0_device.irq[0] = IRQ_EB11MP_SSP; - aaci_device.irq[0] = IRQ_EB11MP_AACI; - mmc0_device.irq[0] = IRQ_EB11MP_MMCI0A; - mmc0_device.irq[1] = IRQ_EB11MP_MMCI0B; - kmi0_device.irq[0] = IRQ_EB11MP_KMI0; - kmi1_device.irq[0] = IRQ_EB11MP_KMI1; - - /* platform devices */ - realview_eb_eth_resources[1].start = IRQ_EB11MP_ETH; - realview_eb_eth_resources[1].end = IRQ_EB11MP_ETH; - realview_eb_isp1761_resources[1].start = IRQ_EB11MP_USB; - realview_eb_isp1761_resources[1].end = IRQ_EB11MP_USB; -} - -#ifdef CONFIG_HAVE_ARM_TWD -static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, - REALVIEW_EB11MP_TWD_BASE, - IRQ_LOCALTIMER); - -static void __init realview_eb_twd_init(void) -{ - if (core_tile_eb11mp() || core_tile_a9mp()) { - int err = twd_local_timer_register(&twd_local_timer); - if (err) - pr_err("twd_local_timer_register failed %d\n", err); - } -} -#else -#define realview_eb_twd_init() do { } while(0) -#endif - -static void __init realview_eb_timer_init(void) -{ - unsigned int timer_irq; - - timer0_va_base = __io_address(REALVIEW_EB_TIMER0_1_BASE); - timer1_va_base = __io_address(REALVIEW_EB_TIMER0_1_BASE) + 0x20; - timer2_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE); - timer3_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE) + 0x20; - - if (core_tile_eb11mp() || core_tile_a9mp()) - timer_irq = IRQ_EB11MP_TIMER0_1; - else - timer_irq = IRQ_EB_TIMER0_1; - - realview_clk_init(__io_address(REALVIEW_SYS_BASE), false); - realview_timer_init(timer_irq); - realview_eb_twd_init(); -} - -static void realview_eb_restart(enum reboot_mode mode, const char *cmd) -{ - void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL); - void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK); - - /* - * To reset, we hit the on-board reset register - * in the system FPGA - */ - __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl); - if (core_tile_eb11mp()) - __raw_writel(0x0008, reset_ctrl); - dsb(); -} - -static void __init realview_eb_init(void) -{ - int i; - - if (core_tile_eb11mp() || core_tile_a9mp()) { - realview_eb11mp_fixup(); - -#ifdef CONFIG_CACHE_L2X0 - /* - * The PL220 needs to be manually configured as the hardware - * doesn't report the correct sizes. - * 1MB (128KB/way), 8-way associativity, event monitor and - * parity enabled, ignore share bit, no force write allocate - * Bits: .... ...0 0111 1001 0000 .... .... .... - */ - l2x0_init(__io_address(REALVIEW_EB11MP_L220_BASE), 0x00790000, 0xfe000fff); - - /* - * due to a bug in the l220 cache controller, we must not call - * the sync function. stub it out here instead! - */ - outer_cache.sync = NULL; -#endif - pmu_device.name = core_tile_a9mp() ? "armv7-pmu" : "armv6-pmu"; - platform_device_register(&pmu_device); - } - - realview_flash_register(&realview_eb_flash_resource, 1); - platform_device_register(&realview_i2c_device); - platform_device_register(&char_lcd_device); - platform_device_register(&realview_leds_device); - eth_device_register(); - realview_usb_register(realview_eb_isp1761_resources); - - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { - struct amba_device *d = amba_devs[i]; - amba_device_register(d, &iomem_resource); - } -} - -MACHINE_START(REALVIEW_EB, "ARM-RealView EB") - /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .atag_offset = 0x100, - .smp = smp_ops(realview_smp_ops), - .fixup = realview_fixup, - .map_io = realview_eb_map_io, - .init_early = realview_init_early, - .init_irq = gic_init_irq, - .init_time = realview_eb_timer_init, - .init_machine = realview_eb_init, -#ifdef CONFIG_ZONE_DMA - .dma_zone_size = SZ_256M, -#endif - .restart = realview_eb_restart, -MACHINE_END diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c deleted file mode 100644 index 537f3878d501..000000000000 --- a/arch/arm/mach-realview/realview_pb1176.c +++ /dev/null @@ -1,395 +0,0 @@ -/* - * linux/arch/arm/mach-realview/realview_pb1176.c - * - * Copyright (C) 2008 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/device.h> -#include <linux/amba/bus.h> -#include <linux/amba/pl061.h> -#include <linux/amba/mmci.h> -#include <linux/amba/pl022.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/partitions.h> -#include <linux/io.h> -#include <linux/irqchip/arm-gic.h> -#include <linux/platform_data/clk-realview.h> -#include <linux/reboot.h> -#include <linux/memblock.h> - -#include "hardware.h" -#include <asm/irq.h> -#include <asm/mach-types.h> -#include <asm/pgtable.h> -#include <asm/hardware/cache-l2x0.h> - -#include <asm/mach/arch.h> -#include <asm/mach/flash.h> -#include <asm/mach/map.h> -#include <asm/mach/time.h> - -#include "board-pb1176.h" -#include "irqs-pb1176.h" - -#include "core.h" - -static struct map_desc realview_pb1176_io_desc[] __initdata = { - { - .virtual = IO_ADDRESS(REALVIEW_SYS_BASE), - .pfn = __phys_to_pfn(REALVIEW_SYS_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_PB1176_GIC_CPU_BASE), - .pfn = __phys_to_pfn(REALVIEW_PB1176_GIC_CPU_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_PB1176_GIC_DIST_BASE), - .pfn = __phys_to_pfn(REALVIEW_PB1176_GIC_DIST_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_DC1176_GIC_CPU_BASE), - .pfn = __phys_to_pfn(REALVIEW_DC1176_GIC_CPU_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_DC1176_GIC_DIST_BASE), - .pfn = __phys_to_pfn(REALVIEW_DC1176_GIC_DIST_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_SCTL_BASE), - .pfn = __phys_to_pfn(REALVIEW_SCTL_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_PB1176_TIMER0_1_BASE), - .pfn = __phys_to_pfn(REALVIEW_PB1176_TIMER0_1_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_PB1176_TIMER2_3_BASE), - .pfn = __phys_to_pfn(REALVIEW_PB1176_TIMER2_3_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_PB1176_L220_BASE), - .pfn = __phys_to_pfn(REALVIEW_PB1176_L220_BASE), - .length = SZ_8K, - .type = MT_DEVICE, - }, -#ifdef CONFIG_DEBUG_LL - { - .virtual = IO_ADDRESS(REALVIEW_PB1176_UART0_BASE), - .pfn = __phys_to_pfn(REALVIEW_PB1176_UART0_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, -#endif -}; - -static void __init realview_pb1176_map_io(void) -{ - iotable_init(realview_pb1176_io_desc, ARRAY_SIZE(realview_pb1176_io_desc)); -} - -static struct pl061_platform_data gpio0_plat_data = { - .gpio_base = 0, -}; - -static struct pl061_platform_data gpio1_plat_data = { - .gpio_base = 8, -}; - -static struct pl061_platform_data gpio2_plat_data = { - .gpio_base = 16, -}; - -static struct pl022_ssp_controller ssp0_plat_data = { - .bus_id = 0, - .enable_dma = 0, - .num_chipselect = 1, -}; - -/* - * RealView PB1176 AMBA devices - */ -#define GPIO2_IRQ { IRQ_PB1176_GPIO2 } -#define GPIO3_IRQ { IRQ_PB1176_GPIO3 } -#define AACI_IRQ { IRQ_PB1176_AACI } -#define MMCI0_IRQ { IRQ_PB1176_MMCI0A, IRQ_PB1176_MMCI0B } -#define KMI0_IRQ { IRQ_PB1176_KMI0 } -#define KMI1_IRQ { IRQ_PB1176_KMI1 } -#define PB1176_SMC_IRQ { } -#define MPMC_IRQ { } -#define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD } -#define SCTL_IRQ { } -#define PB1176_WATCHDOG_IRQ { IRQ_DC1176_WATCHDOG } -#define PB1176_GPIO0_IRQ { IRQ_DC1176_GPIO0 } -#define GPIO1_IRQ { IRQ_PB1176_GPIO1 } -#define PB1176_RTC_IRQ { IRQ_DC1176_RTC } -#define SCI_IRQ { IRQ_PB1176_SCI } -#define PB1176_UART0_IRQ { IRQ_DC1176_UART0 } -#define PB1176_UART1_IRQ { IRQ_DC1176_UART1 } -#define PB1176_UART2_IRQ { IRQ_DC1176_UART2 } -#define PB1176_UART3_IRQ { IRQ_DC1176_UART3 } -#define PB1176_UART4_IRQ { IRQ_PB1176_UART4 } -#define PB1176_SSP_IRQ { IRQ_DC1176_SSP } - -/* FPGA Primecells */ -APB_DEVICE(aaci, "fpga:aaci", AACI, NULL); -APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); -APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); -APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); -APB_DEVICE(uart4, "fpga:uart4", PB1176_UART4, NULL); - -/* DevChip Primecells */ -AHB_DEVICE(smc, "dev:smc", PB1176_SMC, NULL); -AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL); -APB_DEVICE(wdog, "dev:wdog", PB1176_WATCHDOG, NULL); -APB_DEVICE(gpio0, "dev:gpio0", PB1176_GPIO0, &gpio0_plat_data); -APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); -APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); -APB_DEVICE(rtc, "dev:rtc", PB1176_RTC, NULL); -APB_DEVICE(sci0, "dev:sci0", SCI, NULL); -APB_DEVICE(uart0, "dev:uart0", PB1176_UART0, NULL); -APB_DEVICE(uart1, "dev:uart1", PB1176_UART1, NULL); -APB_DEVICE(uart2, "dev:uart2", PB1176_UART2, NULL); -APB_DEVICE(uart3, "dev:uart3", PB1176_UART3, NULL); -APB_DEVICE(ssp0, "dev:ssp0", PB1176_SSP, &ssp0_plat_data); -AHB_DEVICE(clcd, "dev:clcd", PB1176_CLCD, &clcd_plat_data); - -static struct amba_device *amba_devs[] __initdata = { - &uart0_device, - &uart1_device, - &uart2_device, - &uart3_device, - &uart4_device, - &smc_device, - &clcd_device, - &sctl_device, - &wdog_device, - &gpio0_device, - &gpio1_device, - &gpio2_device, - &rtc_device, - &sci0_device, - &ssp0_device, - &aaci_device, - &mmc0_device, - &kmi0_device, - &kmi1_device, -}; - -/* - * RealView PB1176 platform devices - */ -static struct resource realview_pb1176_flash_resources[] = { - { - .start = REALVIEW_PB1176_FLASH_BASE, - .end = REALVIEW_PB1176_FLASH_BASE + REALVIEW_PB1176_FLASH_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -#ifdef CONFIG_REALVIEW_PB1176_SECURE_FLASH - { - .start = REALVIEW_PB1176_SEC_FLASH_BASE, - .end = REALVIEW_PB1176_SEC_FLASH_BASE + REALVIEW_PB1176_SEC_FLASH_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -#endif -}; - -static struct physmap_flash_data pb1176_rom_pdata = { - .probe_type = "map_rom", - .width = 4, - .nr_parts = 0, -}; - -static struct resource pb1176_rom_resources[] = { - /* - * This exposes the PB1176 DevChip ROM as an MTD ROM mapping. - * The reference manual states that this is actually a pseudo-ROM - * programmed in NVRAM. - */ - { - .start = REALVIEW_DC1176_ROM_BASE, - .end = REALVIEW_DC1176_ROM_BASE + SZ_16K - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device pb1176_rom_device = { - .name = "physmap-flash", - .id = -1, - .num_resources = ARRAY_SIZE(pb1176_rom_resources), - .resource = pb1176_rom_resources, - .dev = { - .platform_data = &pb1176_rom_pdata, - }, -}; - -static struct resource realview_pb1176_smsc911x_resources[] = { - [0] = { - .start = REALVIEW_PB1176_ETH_BASE, - .end = REALVIEW_PB1176_ETH_BASE + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PB1176_ETH, - .end = IRQ_PB1176_ETH, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource realview_pb1176_isp1761_resources[] = { - [0] = { - .start = REALVIEW_PB1176_USB_BASE, - .end = REALVIEW_PB1176_USB_BASE + SZ_128K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PB1176_USB, - .end = IRQ_PB1176_USB, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource pmu_resource = { - .start = IRQ_DC1176_CORE_PMU, - .end = IRQ_DC1176_CORE_PMU, - .flags = IORESOURCE_IRQ, -}; - -static struct platform_device pmu_device = { - .name = "armv6-pmu", - .id = -1, - .num_resources = 1, - .resource = &pmu_resource, -}; - -static struct resource char_lcd_resources[] = { - { - .start = REALVIEW_CHAR_LCD_BASE, - .end = (REALVIEW_CHAR_LCD_BASE + SZ_4K - 1), - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_PB1176_CHARLCD, - .end = IRQ_PB1176_CHARLCD, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device char_lcd_device = { - .name = "arm-charlcd", - .id = -1, - .num_resources = ARRAY_SIZE(char_lcd_resources), - .resource = char_lcd_resources, -}; - -static void __init gic_init_irq(void) -{ - /* ARM1176 DevChip GIC, primary */ - gic_init(0, IRQ_DC1176_GIC_START, - __io_address(REALVIEW_DC1176_GIC_DIST_BASE), - __io_address(REALVIEW_DC1176_GIC_CPU_BASE)); - - /* board GIC, secondary */ - gic_init(1, IRQ_PB1176_GIC_START, - __io_address(REALVIEW_PB1176_GIC_DIST_BASE), - __io_address(REALVIEW_PB1176_GIC_CPU_BASE)); - gic_cascade_irq(1, IRQ_DC1176_PB_IRQ1); -} - -static void __init realview_pb1176_timer_init(void) -{ - timer0_va_base = __io_address(REALVIEW_PB1176_TIMER0_1_BASE); - timer1_va_base = __io_address(REALVIEW_PB1176_TIMER0_1_BASE) + 0x20; - timer2_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE); - timer3_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE) + 0x20; - - realview_clk_init(__io_address(REALVIEW_SYS_BASE), true); - realview_timer_init(IRQ_DC1176_TIMER0); -} - -static void realview_pb1176_restart(enum reboot_mode mode, const char *cmd) -{ - void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL); - void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK); - __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl); - __raw_writel(REALVIEW_PB1176_SYS_SOFT_RESET, reset_ctrl); - dsb(); -} - -static void realview_pb1176_fixup(struct tag *tags, char **from) -{ - /* - * RealView PB1176 only has 128MB of RAM mapped at 0. - */ - memblock_add(0, SZ_128M); -} - -static void __init realview_pb1176_init(void) -{ - int i; - -#ifdef CONFIG_CACHE_L2X0 - /* - * The PL220 needs to be manually configured as the hardware - * doesn't report the correct sizes. - * 128kB (16kB/way), 8-way associativity, event monitor and - * parity enabled, ignore share bit, no force write allocate - * Bits: .... ...0 0111 0011 0000 .... .... .... - */ - l2x0_init(__io_address(REALVIEW_PB1176_L220_BASE), 0x00730000, 0xfe000fff); -#endif - - realview_flash_register(realview_pb1176_flash_resources, - ARRAY_SIZE(realview_pb1176_flash_resources)); - platform_device_register(&pb1176_rom_device); - realview_eth_register(NULL, realview_pb1176_smsc911x_resources); - platform_device_register(&realview_i2c_device); - realview_usb_register(realview_pb1176_isp1761_resources); - platform_device_register(&pmu_device); - platform_device_register(&char_lcd_device); - platform_device_register(&realview_leds_device); - - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { - struct amba_device *d = amba_devs[i]; - amba_device_register(d, &iomem_resource); - } -} - -MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176") - /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .atag_offset = 0x100, - .fixup = realview_pb1176_fixup, - .map_io = realview_pb1176_map_io, - .init_early = realview_init_early, - .init_irq = gic_init_irq, - .init_time = realview_pb1176_timer_init, - .init_machine = realview_pb1176_init, -#ifdef CONFIG_ZONE_DMA - .dma_zone_size = SZ_256M, -#endif - .restart = realview_pb1176_restart, -MACHINE_END diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c deleted file mode 100644 index a90a0752f157..000000000000 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ /dev/null @@ -1,385 +0,0 @@ -/* - * linux/arch/arm/mach-realview/realview_pb11mp.c - * - * Copyright (C) 2008 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/device.h> -#include <linux/amba/bus.h> -#include <linux/amba/pl061.h> -#include <linux/amba/mmci.h> -#include <linux/amba/pl022.h> -#include <linux/io.h> -#include <linux/irqchip/arm-gic.h> -#include <linux/platform_data/clk-realview.h> -#include <linux/reboot.h> - -#include "hardware.h" -#include <asm/irq.h> -#include <asm/mach-types.h> -#include <asm/pgtable.h> -#include <asm/hardware/cache-l2x0.h> -#include <asm/smp_twd.h> - -#include <asm/mach/arch.h> -#include <asm/mach/flash.h> -#include <asm/mach/map.h> -#include <asm/mach/time.h> -#include <asm/outercache.h> - -#include "board-pb11mp.h" -#include "irqs-pb11mp.h" - -#include "core.h" - -static struct map_desc realview_pb11mp_io_desc[] __initdata = { - { - .virtual = IO_ADDRESS(REALVIEW_SYS_BASE), - .pfn = __phys_to_pfn(REALVIEW_SYS_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_PB11MP_GIC_CPU_BASE), - .pfn = __phys_to_pfn(REALVIEW_PB11MP_GIC_CPU_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_PB11MP_GIC_DIST_BASE), - .pfn = __phys_to_pfn(REALVIEW_PB11MP_GIC_DIST_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { /* Maps the SCU, GIC CPU interface, TWD, GIC DIST */ - .virtual = IO_ADDRESS(REALVIEW_TC11MP_PRIV_MEM_BASE), - .pfn = __phys_to_pfn(REALVIEW_TC11MP_PRIV_MEM_BASE), - .length = REALVIEW_TC11MP_PRIV_MEM_SIZE, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_SCTL_BASE), - .pfn = __phys_to_pfn(REALVIEW_SCTL_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_PB11MP_TIMER0_1_BASE), - .pfn = __phys_to_pfn(REALVIEW_PB11MP_TIMER0_1_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_PB11MP_TIMER2_3_BASE), - .pfn = __phys_to_pfn(REALVIEW_PB11MP_TIMER2_3_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_TC11MP_L220_BASE), - .pfn = __phys_to_pfn(REALVIEW_TC11MP_L220_BASE), - .length = SZ_8K, - .type = MT_DEVICE, - }, -#ifdef CONFIG_DEBUG_LL - { - .virtual = IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE), - .pfn = __phys_to_pfn(REALVIEW_PB11MP_UART0_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, -#endif -}; - -static void __init realview_pb11mp_map_io(void) -{ - iotable_init(realview_pb11mp_io_desc, ARRAY_SIZE(realview_pb11mp_io_desc)); -} - -static struct pl061_platform_data gpio0_plat_data = { - .gpio_base = 0, -}; - -static struct pl061_platform_data gpio1_plat_data = { - .gpio_base = 8, -}; - -static struct pl061_platform_data gpio2_plat_data = { - .gpio_base = 16, -}; - -static struct pl022_ssp_controller ssp0_plat_data = { - .bus_id = 0, - .enable_dma = 0, - .num_chipselect = 1, -}; - -/* - * RealView PB11MPCore AMBA devices - */ - -#define GPIO2_IRQ { IRQ_PB11MP_GPIO2 } -#define GPIO3_IRQ { IRQ_PB11MP_GPIO3 } -#define AACI_IRQ { IRQ_TC11MP_AACI } -#define MMCI0_IRQ { IRQ_TC11MP_MMCI0A, IRQ_TC11MP_MMCI0B } -#define KMI0_IRQ { IRQ_TC11MP_KMI0 } -#define KMI1_IRQ { IRQ_TC11MP_KMI1 } -#define PB11MP_SMC_IRQ { } -#define MPMC_IRQ { } -#define PB11MP_CLCD_IRQ { IRQ_PB11MP_CLCD } -#define DMAC_IRQ { IRQ_PB11MP_DMAC } -#define SCTL_IRQ { } -#define PB11MP_WATCHDOG_IRQ { IRQ_PB11MP_WATCHDOG } -#define PB11MP_GPIO0_IRQ { IRQ_PB11MP_GPIO0 } -#define GPIO1_IRQ { IRQ_PB11MP_GPIO1 } -#define PB11MP_RTC_IRQ { IRQ_TC11MP_RTC } -#define SCI_IRQ { IRQ_PB11MP_SCI } -#define PB11MP_UART0_IRQ { IRQ_TC11MP_UART0 } -#define PB11MP_UART1_IRQ { IRQ_TC11MP_UART1 } -#define PB11MP_UART2_IRQ { IRQ_PB11MP_UART2 } -#define PB11MP_UART3_IRQ { IRQ_PB11MP_UART3 } -#define PB11MP_SSP_IRQ { IRQ_PB11MP_SSP } - -/* FPGA Primecells */ -APB_DEVICE(aaci, "fpga:aaci", AACI, NULL); -APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); -APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); -APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); -APB_DEVICE(uart3, "fpga:uart3", PB11MP_UART3, NULL); - -/* DevChip Primecells */ -AHB_DEVICE(smc, "dev:smc", PB11MP_SMC, NULL); -AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL); -APB_DEVICE(wdog, "dev:wdog", PB11MP_WATCHDOG, NULL); -APB_DEVICE(gpio0, "dev:gpio0", PB11MP_GPIO0, &gpio0_plat_data); -APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); -APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); -APB_DEVICE(rtc, "dev:rtc", PB11MP_RTC, NULL); -APB_DEVICE(sci0, "dev:sci0", SCI, NULL); -APB_DEVICE(uart0, "dev:uart0", PB11MP_UART0, NULL); -APB_DEVICE(uart1, "dev:uart1", PB11MP_UART1, NULL); -APB_DEVICE(uart2, "dev:uart2", PB11MP_UART2, NULL); -APB_DEVICE(ssp0, "dev:ssp0", PB11MP_SSP, &ssp0_plat_data); - -/* Primecells on the NEC ISSP chip */ -AHB_DEVICE(clcd, "issp:clcd", PB11MP_CLCD, &clcd_plat_data); -AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL); - -static struct amba_device *amba_devs[] __initdata = { - &dmac_device, - &uart0_device, - &uart1_device, - &uart2_device, - &uart3_device, - &smc_device, - &clcd_device, - &sctl_device, - &wdog_device, - &gpio0_device, - &gpio1_device, - &gpio2_device, - &rtc_device, - &sci0_device, - &ssp0_device, - &aaci_device, - &mmc0_device, - &kmi0_device, - &kmi1_device, -}; - -/* - * RealView PB11MPCore platform devices - */ -static struct resource realview_pb11mp_flash_resource[] = { - [0] = { - .start = REALVIEW_PB11MP_FLASH0_BASE, - .end = REALVIEW_PB11MP_FLASH0_BASE + REALVIEW_PB11MP_FLASH0_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = REALVIEW_PB11MP_FLASH1_BASE, - .end = REALVIEW_PB11MP_FLASH1_BASE + REALVIEW_PB11MP_FLASH1_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct resource realview_pb11mp_smsc911x_resources[] = { - [0] = { - .start = REALVIEW_PB11MP_ETH_BASE, - .end = REALVIEW_PB11MP_ETH_BASE + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_TC11MP_ETH, - .end = IRQ_TC11MP_ETH, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource realview_pb11mp_isp1761_resources[] = { - [0] = { - .start = REALVIEW_PB11MP_USB_BASE, - .end = REALVIEW_PB11MP_USB_BASE + SZ_128K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_TC11MP_USB, - .end = IRQ_TC11MP_USB, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource pmu_resources[] = { - [0] = { - .start = IRQ_TC11MP_PMU_CPU0, - .end = IRQ_TC11MP_PMU_CPU0, - .flags = IORESOURCE_IRQ, - }, - [1] = { - .start = IRQ_TC11MP_PMU_CPU1, - .end = IRQ_TC11MP_PMU_CPU1, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_TC11MP_PMU_CPU2, - .end = IRQ_TC11MP_PMU_CPU2, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = IRQ_TC11MP_PMU_CPU3, - .end = IRQ_TC11MP_PMU_CPU3, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device pmu_device = { - .name = "armv6-pmu", - .id = -1, - .num_resources = ARRAY_SIZE(pmu_resources), - .resource = pmu_resources, -}; - -static void __init gic_init_irq(void) -{ - unsigned int pldctrl; - - /* new irq mode with no DCC */ - writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK)); - pldctrl = readl(__io_address(REALVIEW_SYS_BASE) + REALVIEW_PB11MP_SYS_PLD_CTRL1); - pldctrl |= 2 << 22; - writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + REALVIEW_PB11MP_SYS_PLD_CTRL1); - writel(0x00000000, __io_address(REALVIEW_SYS_LOCK)); - - /* ARM11MPCore test chip GIC, primary */ - gic_init(0, 29, __io_address(REALVIEW_TC11MP_GIC_DIST_BASE), - __io_address(REALVIEW_TC11MP_GIC_CPU_BASE)); - - /* board GIC, secondary */ - gic_init(1, IRQ_PB11MP_GIC_START, - __io_address(REALVIEW_PB11MP_GIC_DIST_BASE), - __io_address(REALVIEW_PB11MP_GIC_CPU_BASE)); - gic_cascade_irq(1, IRQ_TC11MP_PB_IRQ1); -} - -#ifdef CONFIG_HAVE_ARM_TWD -static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, - REALVIEW_TC11MP_TWD_BASE, - IRQ_LOCALTIMER); - -static void __init realview_pb11mp_twd_init(void) -{ - int err = twd_local_timer_register(&twd_local_timer); - if (err) - pr_err("twd_local_timer_register failed %d\n", err); -} -#else -#define realview_pb11mp_twd_init() do {} while(0) -#endif - -static void __init realview_pb11mp_timer_init(void) -{ - timer0_va_base = __io_address(REALVIEW_PB11MP_TIMER0_1_BASE); - timer1_va_base = __io_address(REALVIEW_PB11MP_TIMER0_1_BASE) + 0x20; - timer2_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE); - timer3_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE) + 0x20; - - realview_clk_init(__io_address(REALVIEW_SYS_BASE), false); - realview_timer_init(IRQ_TC11MP_TIMER0_1); - realview_pb11mp_twd_init(); -} - -static void realview_pb11mp_restart(enum reboot_mode mode, const char *cmd) -{ - void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL); - void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK); - - /* - * To reset, we hit the on-board reset register - * in the system FPGA - */ - __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl); - __raw_writel(0x0000, reset_ctrl); - __raw_writel(0x0004, reset_ctrl); - dsb(); -} - -static void __init realview_pb11mp_init(void) -{ - int i; - -#ifdef CONFIG_CACHE_L2X0 - /* - * The PL220 needs to be manually configured as the hardware - * doesn't report the correct sizes. - * 1MB (128KB/way), 8-way associativity, event monitor and - * parity enabled, ignore share bit, no force write allocate - * Bits: .... ...0 0111 1001 0000 .... .... .... - */ - l2x0_init(__io_address(REALVIEW_TC11MP_L220_BASE), 0x00790000, 0xfe000fff); - /* - * due to a bug in the l220 cache controller, we must not call - * the sync function. stub it out here instead! - */ - outer_cache.sync = NULL; -#endif - - realview_flash_register(realview_pb11mp_flash_resource, - ARRAY_SIZE(realview_pb11mp_flash_resource)); - realview_eth_register(NULL, realview_pb11mp_smsc911x_resources); - platform_device_register(&realview_i2c_device); - platform_device_register(&realview_cf_device); - platform_device_register(&realview_leds_device); - realview_usb_register(realview_pb11mp_isp1761_resources); - platform_device_register(&pmu_device); - - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { - struct amba_device *d = amba_devs[i]; - amba_device_register(d, &iomem_resource); - } -} - -MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore") - /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .atag_offset = 0x100, - .smp = smp_ops(realview_smp_ops), - .fixup = realview_fixup, - .map_io = realview_pb11mp_map_io, - .init_early = realview_init_early, - .init_irq = gic_init_irq, - .init_time = realview_pb11mp_timer_init, - .init_machine = realview_pb11mp_init, -#ifdef CONFIG_ZONE_DMA - .dma_zone_size = SZ_256M, -#endif - .restart = realview_pb11mp_restart, -MACHINE_END diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c deleted file mode 100644 index ddafb67c2b6f..000000000000 --- a/arch/arm/mach-realview/realview_pba8.c +++ /dev/null @@ -1,307 +0,0 @@ -/* - * linux/arch/arm/mach-realview/realview_pba8.c - * - * Copyright (C) 2008 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/device.h> -#include <linux/amba/bus.h> -#include <linux/amba/pl061.h> -#include <linux/amba/mmci.h> -#include <linux/amba/pl022.h> -#include <linux/io.h> -#include <linux/irqchip/arm-gic.h> -#include <linux/platform_data/clk-realview.h> -#include <linux/reboot.h> - -#include <asm/irq.h> -#include <asm/mach-types.h> -#include <asm/pgtable.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/time.h> - -#include "hardware.h" -#include "board-pba8.h" -#include "irqs-pba8.h" - -#include "core.h" - -static struct map_desc realview_pba8_io_desc[] __initdata = { - { - .virtual = IO_ADDRESS(REALVIEW_SYS_BASE), - .pfn = __phys_to_pfn(REALVIEW_SYS_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_PBA8_GIC_CPU_BASE), - .pfn = __phys_to_pfn(REALVIEW_PBA8_GIC_CPU_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_PBA8_GIC_DIST_BASE), - .pfn = __phys_to_pfn(REALVIEW_PBA8_GIC_DIST_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_SCTL_BASE), - .pfn = __phys_to_pfn(REALVIEW_SCTL_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_PBA8_TIMER0_1_BASE), - .pfn = __phys_to_pfn(REALVIEW_PBA8_TIMER0_1_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_PBA8_TIMER2_3_BASE), - .pfn = __phys_to_pfn(REALVIEW_PBA8_TIMER2_3_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, -#ifdef CONFIG_DEBUG_LL - { - .virtual = IO_ADDRESS(REALVIEW_PBA8_UART0_BASE), - .pfn = __phys_to_pfn(REALVIEW_PBA8_UART0_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, -#endif -}; - -static void __init realview_pba8_map_io(void) -{ - iotable_init(realview_pba8_io_desc, ARRAY_SIZE(realview_pba8_io_desc)); -} - -static struct pl061_platform_data gpio0_plat_data = { - .gpio_base = 0, -}; - -static struct pl061_platform_data gpio1_plat_data = { - .gpio_base = 8, -}; - -static struct pl061_platform_data gpio2_plat_data = { - .gpio_base = 16, -}; - -static struct pl022_ssp_controller ssp0_plat_data = { - .bus_id = 0, - .enable_dma = 0, - .num_chipselect = 1, -}; - -/* - * RealView PBA8Core AMBA devices - */ - -#define GPIO2_IRQ { IRQ_PBA8_GPIO2 } -#define GPIO3_IRQ { IRQ_PBA8_GPIO3 } -#define AACI_IRQ { IRQ_PBA8_AACI } -#define MMCI0_IRQ { IRQ_PBA8_MMCI0A, IRQ_PBA8_MMCI0B } -#define KMI0_IRQ { IRQ_PBA8_KMI0 } -#define KMI1_IRQ { IRQ_PBA8_KMI1 } -#define PBA8_SMC_IRQ { } -#define MPMC_IRQ { } -#define PBA8_CLCD_IRQ { IRQ_PBA8_CLCD } -#define DMAC_IRQ { IRQ_PBA8_DMAC } -#define SCTL_IRQ { } -#define PBA8_WATCHDOG_IRQ { IRQ_PBA8_WATCHDOG } -#define PBA8_GPIO0_IRQ { IRQ_PBA8_GPIO0 } -#define GPIO1_IRQ { IRQ_PBA8_GPIO1 } -#define PBA8_RTC_IRQ { IRQ_PBA8_RTC } -#define SCI_IRQ { IRQ_PBA8_SCI } -#define PBA8_UART0_IRQ { IRQ_PBA8_UART0 } -#define PBA8_UART1_IRQ { IRQ_PBA8_UART1 } -#define PBA8_UART2_IRQ { IRQ_PBA8_UART2 } -#define PBA8_UART3_IRQ { IRQ_PBA8_UART3 } -#define PBA8_SSP_IRQ { IRQ_PBA8_SSP } - -/* FPGA Primecells */ -APB_DEVICE(aaci, "fpga:aaci", AACI, NULL); -APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); -APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); -APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); -APB_DEVICE(uart3, "fpga:uart3", PBA8_UART3, NULL); - -/* DevChip Primecells */ -AHB_DEVICE(smc, "dev:smc", PBA8_SMC, NULL); -AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL); -APB_DEVICE(wdog, "dev:wdog", PBA8_WATCHDOG, NULL); -APB_DEVICE(gpio0, "dev:gpio0", PBA8_GPIO0, &gpio0_plat_data); -APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); -APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); -APB_DEVICE(rtc, "dev:rtc", PBA8_RTC, NULL); -APB_DEVICE(sci0, "dev:sci0", SCI, NULL); -APB_DEVICE(uart0, "dev:uart0", PBA8_UART0, NULL); -APB_DEVICE(uart1, "dev:uart1", PBA8_UART1, NULL); -APB_DEVICE(uart2, "dev:uart2", PBA8_UART2, NULL); -APB_DEVICE(ssp0, "dev:ssp0", PBA8_SSP, &ssp0_plat_data); - -/* Primecells on the NEC ISSP chip */ -AHB_DEVICE(clcd, "issp:clcd", PBA8_CLCD, &clcd_plat_data); -AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL); - -static struct amba_device *amba_devs[] __initdata = { - &dmac_device, - &uart0_device, - &uart1_device, - &uart2_device, - &uart3_device, - &smc_device, - &clcd_device, - &sctl_device, - &wdog_device, - &gpio0_device, - &gpio1_device, - &gpio2_device, - &rtc_device, - &sci0_device, - &ssp0_device, - &aaci_device, - &mmc0_device, - &kmi0_device, - &kmi1_device, -}; - -/* - * RealView PB-A8 platform devices - */ -static struct resource realview_pba8_flash_resource[] = { - [0] = { - .start = REALVIEW_PBA8_FLASH0_BASE, - .end = REALVIEW_PBA8_FLASH0_BASE + REALVIEW_PBA8_FLASH0_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = REALVIEW_PBA8_FLASH1_BASE, - .end = REALVIEW_PBA8_FLASH1_BASE + REALVIEW_PBA8_FLASH1_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct resource realview_pba8_smsc911x_resources[] = { - [0] = { - .start = REALVIEW_PBA8_ETH_BASE, - .end = REALVIEW_PBA8_ETH_BASE + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PBA8_ETH, - .end = IRQ_PBA8_ETH, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource realview_pba8_isp1761_resources[] = { - [0] = { - .start = REALVIEW_PBA8_USB_BASE, - .end = REALVIEW_PBA8_USB_BASE + SZ_128K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PBA8_USB, - .end = IRQ_PBA8_USB, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource pmu_resource = { - .start = IRQ_PBA8_PMU, - .end = IRQ_PBA8_PMU, - .flags = IORESOURCE_IRQ, -}; - -static struct platform_device pmu_device = { - .name = "armv7-pmu", - .id = -1, - .num_resources = 1, - .resource = &pmu_resource, -}; - -static void __init gic_init_irq(void) -{ - /* ARM PB-A8 on-board GIC */ - gic_init(0, IRQ_PBA8_GIC_START, - __io_address(REALVIEW_PBA8_GIC_DIST_BASE), - __io_address(REALVIEW_PBA8_GIC_CPU_BASE)); -} - -static void __init realview_pba8_timer_init(void) -{ - timer0_va_base = __io_address(REALVIEW_PBA8_TIMER0_1_BASE); - timer1_va_base = __io_address(REALVIEW_PBA8_TIMER0_1_BASE) + 0x20; - timer2_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE); - timer3_va_base = __io_address(REALVIEW_PBA8_TIMER2_3_BASE) + 0x20; - - realview_clk_init(__io_address(REALVIEW_SYS_BASE), false); - realview_timer_init(IRQ_PBA8_TIMER0_1); -} - -static void realview_pba8_restart(enum reboot_mode mode, const char *cmd) -{ - void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL); - void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK); - - /* - * To reset, we hit the on-board reset register - * in the system FPGA - */ - __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl); - __raw_writel(0x0000, reset_ctrl); - __raw_writel(0x0004, reset_ctrl); - dsb(); -} - -static void __init realview_pba8_init(void) -{ - int i; - - realview_flash_register(realview_pba8_flash_resource, - ARRAY_SIZE(realview_pba8_flash_resource)); - realview_eth_register(NULL, realview_pba8_smsc911x_resources); - platform_device_register(&realview_i2c_device); - platform_device_register(&realview_cf_device); - platform_device_register(&realview_leds_device); - realview_usb_register(realview_pba8_isp1761_resources); - platform_device_register(&pmu_device); - - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { - struct amba_device *d = amba_devs[i]; - amba_device_register(d, &iomem_resource); - } -} - -MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8") - /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .atag_offset = 0x100, - .fixup = realview_fixup, - .map_io = realview_pba8_map_io, - .init_early = realview_init_early, - .init_irq = gic_init_irq, - .init_time = realview_pba8_timer_init, - .init_machine = realview_pba8_init, -#ifdef CONFIG_ZONE_DMA - .dma_zone_size = SZ_256M, -#endif - .restart = realview_pba8_restart, -MACHINE_END diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c deleted file mode 100644 index be1cec5fe3ad..000000000000 --- a/arch/arm/mach-realview/realview_pbx.c +++ /dev/null @@ -1,402 +0,0 @@ -/* - * arch/arm/mach-realview/realview_pbx.c - * - * Copyright (C) 2009 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/device.h> -#include <linux/amba/bus.h> -#include <linux/amba/pl061.h> -#include <linux/amba/mmci.h> -#include <linux/amba/pl022.h> -#include <linux/io.h> -#include <linux/irqchip/arm-gic.h> -#include <linux/platform_data/clk-realview.h> -#include <linux/reboot.h> -#include <linux/memblock.h> - -#include <asm/irq.h> -#include <asm/mach-types.h> -#include <asm/smp_twd.h> -#include <asm/pgtable.h> -#include <asm/hardware/cache-l2x0.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/time.h> - -#include "hardware.h" -#include "board-pbx.h" -#include "irqs-pbx.h" - -#include "core.h" - -static struct map_desc realview_pbx_io_desc[] __initdata = { - { - .virtual = IO_ADDRESS(REALVIEW_SYS_BASE), - .pfn = __phys_to_pfn(REALVIEW_SYS_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_PBX_GIC_CPU_BASE), - .pfn = __phys_to_pfn(REALVIEW_PBX_GIC_CPU_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_PBX_GIC_DIST_BASE), - .pfn = __phys_to_pfn(REALVIEW_PBX_GIC_DIST_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_SCTL_BASE), - .pfn = __phys_to_pfn(REALVIEW_SCTL_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_PBX_TIMER0_1_BASE), - .pfn = __phys_to_pfn(REALVIEW_PBX_TIMER0_1_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_PBX_TIMER2_3_BASE), - .pfn = __phys_to_pfn(REALVIEW_PBX_TIMER2_3_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, -#ifdef CONFIG_DEBUG_LL - { - .virtual = IO_ADDRESS(REALVIEW_PBX_UART0_BASE), - .pfn = __phys_to_pfn(REALVIEW_PBX_UART0_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, -#endif -}; - -static struct map_desc realview_local_io_desc[] __initdata = { - { - .virtual = IO_ADDRESS(REALVIEW_PBX_TILE_SCU_BASE), - .pfn = __phys_to_pfn(REALVIEW_PBX_TILE_SCU_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_PBX_TILE_GIC_DIST_BASE), - .pfn = __phys_to_pfn(REALVIEW_PBX_TILE_GIC_DIST_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_PBX_TILE_L220_BASE), - .pfn = __phys_to_pfn(REALVIEW_PBX_TILE_L220_BASE), - .length = SZ_8K, - .type = MT_DEVICE, - } -}; - -static void __init realview_pbx_map_io(void) -{ - iotable_init(realview_pbx_io_desc, ARRAY_SIZE(realview_pbx_io_desc)); - if (core_tile_pbx11mp() || core_tile_pbxa9mp()) - iotable_init(realview_local_io_desc, ARRAY_SIZE(realview_local_io_desc)); -} - -static struct pl061_platform_data gpio0_plat_data = { - .gpio_base = 0, -}; - -static struct pl061_platform_data gpio1_plat_data = { - .gpio_base = 8, -}; - -static struct pl061_platform_data gpio2_plat_data = { - .gpio_base = 16, -}; - -static struct pl022_ssp_controller ssp0_plat_data = { - .bus_id = 0, - .enable_dma = 0, - .num_chipselect = 1, -}; - -/* - * RealView PBXCore AMBA devices - */ - -#define GPIO2_IRQ { IRQ_PBX_GPIO2 } -#define GPIO3_IRQ { IRQ_PBX_GPIO3 } -#define AACI_IRQ { IRQ_PBX_AACI } -#define MMCI0_IRQ { IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B } -#define KMI0_IRQ { IRQ_PBX_KMI0 } -#define KMI1_IRQ { IRQ_PBX_KMI1 } -#define PBX_SMC_IRQ { } -#define MPMC_IRQ { } -#define PBX_CLCD_IRQ { IRQ_PBX_CLCD } -#define DMAC_IRQ { IRQ_PBX_DMAC } -#define SCTL_IRQ { } -#define PBX_WATCHDOG_IRQ { IRQ_PBX_WATCHDOG } -#define PBX_GPIO0_IRQ { IRQ_PBX_GPIO0 } -#define GPIO1_IRQ { IRQ_PBX_GPIO1 } -#define PBX_RTC_IRQ { IRQ_PBX_RTC } -#define SCI_IRQ { IRQ_PBX_SCI } -#define PBX_UART0_IRQ { IRQ_PBX_UART0 } -#define PBX_UART1_IRQ { IRQ_PBX_UART1 } -#define PBX_UART2_IRQ { IRQ_PBX_UART2 } -#define PBX_UART3_IRQ { IRQ_PBX_UART3 } -#define PBX_SSP_IRQ { IRQ_PBX_SSP } - -/* FPGA Primecells */ -APB_DEVICE(aaci, "fpga:aaci", AACI, NULL); -APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); -APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); -APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); -APB_DEVICE(uart3, "fpga:uart3", PBX_UART3, NULL); - -/* DevChip Primecells */ -AHB_DEVICE(smc, "dev:smc", PBX_SMC, NULL); -AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL); -APB_DEVICE(wdog, "dev:wdog", PBX_WATCHDOG, NULL); -APB_DEVICE(gpio0, "dev:gpio0", PBX_GPIO0, &gpio0_plat_data); -APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data); -APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data); -APB_DEVICE(rtc, "dev:rtc", PBX_RTC, NULL); -APB_DEVICE(sci0, "dev:sci0", SCI, NULL); -APB_DEVICE(uart0, "dev:uart0", PBX_UART0, NULL); -APB_DEVICE(uart1, "dev:uart1", PBX_UART1, NULL); -APB_DEVICE(uart2, "dev:uart2", PBX_UART2, NULL); -APB_DEVICE(ssp0, "dev:ssp0", PBX_SSP, &ssp0_plat_data); - -/* Primecells on the NEC ISSP chip */ -AHB_DEVICE(clcd, "issp:clcd", PBX_CLCD, &clcd_plat_data); -AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL); - -static struct amba_device *amba_devs[] __initdata = { - &dmac_device, - &uart0_device, - &uart1_device, - &uart2_device, - &uart3_device, - &smc_device, - &clcd_device, - &sctl_device, - &wdog_device, - &gpio0_device, - &gpio1_device, - &gpio2_device, - &rtc_device, - &sci0_device, - &ssp0_device, - &aaci_device, - &mmc0_device, - &kmi0_device, - &kmi1_device, -}; - -/* - * RealView PB-X platform devices - */ -static struct resource realview_pbx_flash_resources[] = { - [0] = { - .start = REALVIEW_PBX_FLASH0_BASE, - .end = REALVIEW_PBX_FLASH0_BASE + REALVIEW_PBX_FLASH0_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = REALVIEW_PBX_FLASH1_BASE, - .end = REALVIEW_PBX_FLASH1_BASE + REALVIEW_PBX_FLASH1_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct resource realview_pbx_smsc911x_resources[] = { - [0] = { - .start = REALVIEW_PBX_ETH_BASE, - .end = REALVIEW_PBX_ETH_BASE + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PBX_ETH, - .end = IRQ_PBX_ETH, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource realview_pbx_isp1761_resources[] = { - [0] = { - .start = REALVIEW_PBX_USB_BASE, - .end = REALVIEW_PBX_USB_BASE + SZ_128K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PBX_USB, - .end = IRQ_PBX_USB, - .flags = IORESOURCE_IRQ, - }, -}; - -#ifdef CONFIG_CACHE_L2X0 -static struct resource pmu_resources[] = { - [0] = { - .start = IRQ_PBX_PMU_CPU0, - .end = IRQ_PBX_PMU_CPU0, - .flags = IORESOURCE_IRQ, - }, - [1] = { - .start = IRQ_PBX_PMU_CPU1, - .end = IRQ_PBX_PMU_CPU1, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_PBX_PMU_CPU2, - .end = IRQ_PBX_PMU_CPU2, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = IRQ_PBX_PMU_CPU3, - .end = IRQ_PBX_PMU_CPU3, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device pmu_device = { - .name = "armv7-pmu", - .id = -1, - .num_resources = ARRAY_SIZE(pmu_resources), - .resource = pmu_resources, -}; -#endif - -static void __init gic_init_irq(void) -{ - /* ARM PBX on-board GIC */ - if (core_tile_pbx11mp() || core_tile_pbxa9mp()) { - gic_init(0, 29, __io_address(REALVIEW_PBX_TILE_GIC_DIST_BASE), - __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE)); - } else { - gic_init(0, IRQ_PBX_GIC_START, - __io_address(REALVIEW_PBX_GIC_DIST_BASE), - __io_address(REALVIEW_PBX_GIC_CPU_BASE)); - } -} - -#ifdef CONFIG_HAVE_ARM_TWD -static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, - REALVIEW_PBX_TILE_TWD_BASE, - IRQ_LOCALTIMER); - -static void __init realview_pbx_twd_init(void) -{ - int err = twd_local_timer_register(&twd_local_timer); - if (err) - pr_err("twd_local_timer_register failed %d\n", err); -} -#else -#define realview_pbx_twd_init() do { } while(0) -#endif - -static void __init realview_pbx_timer_init(void) -{ - timer0_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE); - timer1_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE) + 0x20; - timer2_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE); - timer3_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE) + 0x20; - - realview_clk_init(__io_address(REALVIEW_SYS_BASE), false); - realview_timer_init(IRQ_PBX_TIMER0_1); - realview_pbx_twd_init(); -} - -static void realview_pbx_fixup(struct tag *tags, char **from) -{ -#ifdef CONFIG_SPARSEMEM - /* - * Memory configuration with SPARSEMEM enabled on RealView PBX (see - * asm/mach/memory.h for more information). - */ - - memblock_add(0, SZ_256M); - memblock_add(0x20000000, SZ_512M); - memblock_add(0x80000000, SZ_256M); -#else - realview_fixup(tags, from); -#endif -} - -static void realview_pbx_restart(enum reboot_mode mode, const char *cmd) -{ - void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL); - void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK); - - /* - * To reset, we hit the on-board reset register - * in the system FPGA - */ - __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl); - __raw_writel(0x00F0, reset_ctrl); - __raw_writel(0x00F4, reset_ctrl); - dsb(); -} - -static void __init realview_pbx_init(void) -{ - int i; - -#ifdef CONFIG_CACHE_L2X0 - if (core_tile_pbxa9mp()) { - void __iomem *l2x0_base = - __io_address(REALVIEW_PBX_TILE_L220_BASE); - - /* set RAM latencies to 1 cycle for eASIC */ - writel(0, l2x0_base + L310_TAG_LATENCY_CTRL); - writel(0, l2x0_base + L310_DATA_LATENCY_CTRL); - - /* 16KB way size, 8-way associativity, parity disabled - * Bits: .. 0 0 0 0 1 00 1 0 1 001 0 000 0 .... .... .... */ - l2x0_init(l2x0_base, 0x02520000, 0xc0000fff); - platform_device_register(&pmu_device); - } -#endif - - realview_flash_register(realview_pbx_flash_resources, - ARRAY_SIZE(realview_pbx_flash_resources)); - realview_eth_register(NULL, realview_pbx_smsc911x_resources); - platform_device_register(&realview_i2c_device); - platform_device_register(&realview_cf_device); - platform_device_register(&realview_leds_device); - realview_usb_register(realview_pbx_isp1761_resources); - - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { - struct amba_device *d = amba_devs[i]; - amba_device_register(d, &iomem_resource); - } -} - -MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX") - /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .atag_offset = 0x100, - .smp = smp_ops(realview_smp_ops), - .fixup = realview_pbx_fixup, - .map_io = realview_pbx_map_io, - .init_early = realview_init_early, - .init_irq = gic_init_irq, - .init_time = realview_pbx_timer_init, - .init_machine = realview_pbx_init, -#ifdef CONFIG_ZONE_DMA - .dma_zone_size = SZ_256M, -#endif - .restart = realview_pbx_restart, -MACHINE_END diff --git a/arch/arm/mach-rpc/include/mach/hardware.h b/arch/arm/mach-rpc/include/mach/hardware.h index 257166b21f3d..aa79fa47373a 100644 --- a/arch/arm/mach-rpc/include/mach/hardware.h +++ b/arch/arm/mach-rpc/include/mach/hardware.h @@ -40,7 +40,7 @@ #define SCREEN_END 0xdfc00000 #define SCREEN_BASE 0xdf800000 -#define UNCACHEABLE_ADDR 0xdf010000 +#define UNCACHEABLE_ADDR (FLUSH_BASE + 0x10000) /* * IO Addresses diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index fe7485dc7fb5..f6c3f151d0d4 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -33,6 +33,7 @@ #include <linux/delay.h> #include <linux/io.h> #include <linux/platform_data/dma-s3c24xx.h> +#include <linux/dmaengine.h> #include <mach/hardware.h> #include <mach/regs-clock.h> @@ -445,10 +446,44 @@ static struct s3c24xx_dma_channel s3c2440_dma_channels[DMACH_MAX] = { [DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), }, }; +static const struct dma_slave_map s3c2440_dma_slave_map[] = { + /* TODO: DMACH_XD0 */ + /* TODO: DMACH_XD1 */ + { "s3c2440-sdi", "rx-tx", (void *)DMACH_SDI }, + { "s3c2410-spi.0", "rx", (void *)DMACH_SPI0 }, + { "s3c2410-spi.0", "tx", (void *)DMACH_SPI0 }, + { "s3c2410-spi.1", "rx", (void *)DMACH_SPI1 }, + { "s3c2410-spi.1", "tx", (void *)DMACH_SPI1 }, + { "s3c2440-uart.0", "rx", (void *)DMACH_UART0 }, + { "s3c2440-uart.0", "tx", (void *)DMACH_UART0 }, + { "s3c2440-uart.1", "rx", (void *)DMACH_UART1 }, + { "s3c2440-uart.1", "tx", (void *)DMACH_UART1 }, + { "s3c2440-uart.2", "rx", (void *)DMACH_UART2 }, + { "s3c2440-uart.2", "tx", (void *)DMACH_UART2 }, + { "s3c2440-uart.3", "rx", (void *)DMACH_UART3 }, + { "s3c2440-uart.3", "tx", (void *)DMACH_UART3 }, + /* TODO: DMACH_TIMER */ + { "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN }, + { "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT }, + { "samsung-ac97", "rx", (void *)DMACH_PCM_IN }, + { "samsung-ac97", "tx", (void *)DMACH_PCM_OUT }, + { "samsung-ac97", "rx", (void *)DMACH_MIC_IN }, + { "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 }, + { "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 }, + { "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 }, + { "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 }, + { "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 }, + { "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 }, + { "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 }, + { "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 } +}; + static struct s3c24xx_dma_platdata s3c2440_dma_platdata = { .num_phy_channels = 4, .channels = s3c2440_dma_channels, .num_channels = DMACH_MAX, + .slave_map = s3c2440_dma_slave_map, + .slavecnt = ARRAY_SIZE(s3c2440_dma_slave_map), }; struct platform_device s3c2440_device_dma = { diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c index bbf41322d726..ec60bd4a1646 100644 --- a/arch/arm/mach-s3c24xx/mach-mini2440.c +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c @@ -497,9 +497,28 @@ static struct i2c_board_info mini2440_i2c_devs[] __initdata = { }, }; +static struct uda134x_platform_data s3c24xx_uda134x = { + .l3 = { + .gpio_clk = S3C2410_GPB(4), + .gpio_data = S3C2410_GPB(3), + .gpio_mode = S3C2410_GPB(2), + .use_gpios = 1, + .data_hold = 1, + .data_setup = 1, + .clock_high = 1, + .mode_hold = 1, + .mode = 1, + .mode_setup = 1, + }, + .model = UDA134X_UDA1341, +}; + static struct platform_device uda1340_codec = { .name = "uda134x-codec", .id = -1, + .dev = { + .platform_data = &s3c24xx_uda134x, + }, }; static struct platform_device *mini2440_devices[] __initdata = { diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c index cbf53bb9c814..0db46895c82a 100644 --- a/arch/arm/mach-sa1100/clock.c +++ b/arch/arm/mach-sa1100/clock.c @@ -125,6 +125,8 @@ static unsigned long clk_36864_get_rate(struct clk *clk) } static struct clkops clk_36864_ops = { + .enable = clk_cpu_enable, + .disable = clk_cpu_disable, .get_rate = clk_36864_get_rate, }; @@ -140,9 +142,8 @@ static struct clk_lookup sa11xx_clkregs[] = { CLKDEV_INIT(NULL, "OSTIMER0", &clk_36864), }; -static int __init sa11xx_clk_init(void) +int __init sa11xx_clk_init(void) { clkdev_add_table(sa11xx_clkregs, ARRAY_SIZE(sa11xx_clkregs)); return 0; } -core_initcall(sa11xx_clk_init); diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 345e63f4eb71..3e09beddb6e8 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -34,6 +34,7 @@ #include <mach/hardware.h> #include <mach/irqs.h> +#include <mach/reset.h> #include "generic.h" #include <clocksource/pxa.h> @@ -95,6 +96,8 @@ static void sa1100_power_off(void) void sa11x0_restart(enum reboot_mode mode, const char *cmd) { + clear_reset_status(RESET_STATUS_ALL); + if (mode == REBOOT_SOFT) { /* Jump into ROM at address 0 */ soft_restart(0); @@ -388,6 +391,7 @@ void __init sa1100_init_irq(void) sa11x0_init_irq_nodt(IRQ_GPIO0_SC, irq_resource.start); sa1100_init_gpio(); + sa11xx_clk_init(); } /* diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h index 0d92e119b36b..68199b603ff7 100644 --- a/arch/arm/mach-sa1100/generic.h +++ b/arch/arm/mach-sa1100/generic.h @@ -44,3 +44,5 @@ int sa11x0_pm_init(void); #else static inline int sa11x0_pm_init(void) { return 0; } #endif + +int sa11xx_clk_init(void); diff --git a/arch/arm/mach-sa1100/h3xxx.c b/arch/arm/mach-sa1100/h3xxx.c index b1d4faa12f9a..b69e76614d5b 100644 --- a/arch/arm/mach-sa1100/h3xxx.c +++ b/arch/arm/mach-sa1100/h3xxx.c @@ -14,9 +14,9 @@ #include <linux/gpio.h> #include <linux/gpio_keys.h> #include <linux/input.h> -#include <linux/mfd/htc-egpio.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/platform_data/gpio-htc-egpio.h> #include <linux/platform_data/sa11x0-serial.h> #include <linux/platform_device.h> #include <linux/serial_core.h> diff --git a/arch/arm/mach-sa1100/include/mach/hardware.h b/arch/arm/mach-sa1100/include/mach/hardware.h index cbedd75a9d65..d944fd7e464f 100644 --- a/arch/arm/mach-sa1100/include/mach/hardware.h +++ b/arch/arm/mach-sa1100/include/mach/hardware.h @@ -13,7 +13,7 @@ #define __ASM_ARCH_HARDWARE_H -#define UNCACHEABLE_ADDR 0xfa050000 +#define UNCACHEABLE_ADDR 0xfa050000 /* ICIP */ /* @@ -36,28 +36,10 @@ #define io_v2p( x ) \ ( (((x)&0x00ffffff) | (((x)&(0x30000000>>VIO_SHIFT))<<VIO_SHIFT)) + PIO_START ) -#define CPU_SA1110_A0 (0) -#define CPU_SA1110_B0 (4) -#define CPU_SA1110_B1 (5) -#define CPU_SA1110_B2 (6) -#define CPU_SA1110_B4 (8) - -#define CPU_SA1100_ID (0x4401a110) -#define CPU_SA1100_MASK (0xfffffff0) -#define CPU_SA1110_ID (0x6901b110) -#define CPU_SA1110_MASK (0xfffffff0) - #define __MREG(x) IOMEM(io_p2v(x)) #ifndef __ASSEMBLY__ -#include <asm/cputype.h> - -#define CPU_REVISION (read_cpuid_id() & 15) - -#define cpu_is_sa1100() ((read_cpuid_id() & CPU_SA1100_MASK) == CPU_SA1100_ID) -#define cpu_is_sa1110() ((read_cpuid_id() & CPU_SA1110_MASK) == CPU_SA1110_ID) - # define __REG(x) (*((volatile unsigned long __iomem *)io_p2v(x))) # define __PREG(x) (io_v2p((unsigned long)&(x))) diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c index c0b1f5bafae4..0a2ca9be00e6 100644 --- a/arch/arm/mach-sa1100/jornada720.c +++ b/arch/arm/mach-sa1100/jornada720.c @@ -17,6 +17,7 @@ #include <linux/kernel.h> #include <linux/tty.h> #include <linux/delay.h> +#include <linux/gpio/machine.h> #include <linux/platform_data/sa11x0-serial.h> #include <linux/platform_device.h> #include <linux/ioport.h> @@ -217,9 +218,22 @@ static struct platform_device jornada_ssp_device = { .id = -1, }; +static struct resource jornada_kbd_resources[] = { + DEFINE_RES_IRQ(IRQ_GPIO0), +}; + static struct platform_device jornada_kbd_device = { .name = "jornada720_kbd", .id = -1, + .num_resources = ARRAY_SIZE(jornada_kbd_resources), + .resource = jornada_kbd_resources, +}; + +static struct gpiod_lookup_table jornada_ts_gpiod_table = { + .dev_id = "jornada_ts", + .table = { + GPIO_LOOKUP("gpio", 9, "penup", GPIO_ACTIVE_HIGH), + }, }; static struct platform_device jornada_ts_device = { @@ -250,6 +264,8 @@ static int __init jornada720_init(void) GPSR = GPIO_GPIO20; /* restart gpio20 */ udelay(20); /* give it some time to restart */ + gpiod_add_lookup_table(&jornada_ts_gpiod_table); + ret = platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c index 1525d7b5f1b7..88149f85bc49 100644 --- a/arch/arm/mach-sa1100/pleb.c +++ b/arch/arm/mach-sa1100/pleb.c @@ -45,7 +45,7 @@ static struct resource smc91x_resources[] = { }; static struct smc91x_platdata smc91x_platdata = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .flags = SMC91X_USE_16BIT | SMC91X_USE_8BIT | SMC91X_NOWAIT, }; static struct platform_device smc91x_device = { diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 4a48c9f5f725..09817bae4558 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -22,7 +22,6 @@ config ARCH_RCAR_GEN2 select PM_GENERIC_DOMAINS select RENESAS_IRQC select SYS_SUPPORTS_SH_CMT - select PCI_DOMAINS if PCI config ARCH_RMOBILE bool diff --git a/arch/arm/mach-shmobile/platsmp-scu.c b/arch/arm/mach-shmobile/platsmp-scu.c index 8d478f1da265..d1ecaf37d142 100644 --- a/arch/arm/mach-shmobile/platsmp-scu.c +++ b/arch/arm/mach-shmobile/platsmp-scu.c @@ -21,26 +21,14 @@ static phys_addr_t shmobile_scu_base_phys; static void __iomem *shmobile_scu_base; -static int shmobile_smp_scu_notifier_call(struct notifier_block *nfb, - unsigned long action, void *hcpu) +static int shmobile_scu_cpu_prepare(unsigned int cpu) { - unsigned int cpu = (long)hcpu; - - switch (action) { - case CPU_UP_PREPARE: - /* For this particular CPU register SCU SMP boot vector */ - shmobile_smp_hook(cpu, virt_to_phys(shmobile_boot_scu), - shmobile_scu_base_phys); - break; - }; - - return NOTIFY_OK; + /* For this particular CPU register SCU SMP boot vector */ + shmobile_smp_hook(cpu, virt_to_phys(shmobile_boot_scu), + shmobile_scu_base_phys); + return 0; } -static struct notifier_block shmobile_smp_scu_notifier = { - .notifier_call = shmobile_smp_scu_notifier_call, -}; - void __init shmobile_smp_scu_prepare_cpus(phys_addr_t scu_base_phys, unsigned int max_cpus) { @@ -54,7 +42,9 @@ void __init shmobile_smp_scu_prepare_cpus(phys_addr_t scu_base_phys, scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL); /* Use CPU notifier for reset vector control */ - register_cpu_notifier(&shmobile_smp_scu_notifier); + cpuhp_setup_state_nocalls(CPUHP_ARM_SHMOBILE_SCU_PREPARE, + "arm/shmobile-scu:prepare", + shmobile_scu_cpu_prepare, NULL); } #ifdef CONFIG_HOTPLUG_CPU diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c index 62437b57813e..73e3adbc1330 100644 --- a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c +++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c @@ -41,39 +41,26 @@ #define REGULATOR_IRQ_MASK BIT(2) /* IRQ2, active low */ -static void __iomem *irqc; - -static const u8 da9063_mask_regs[] = { - DA9063_REG_IRQ_MASK_A, - DA9063_REG_IRQ_MASK_B, - DA9063_REG_IRQ_MASK_C, - DA9063_REG_IRQ_MASK_D, -}; - -/* DA9210 System Control and Event Registers */ +/* start of DA9210 System Control and Event Registers */ #define DA9210_REG_MASK_A 0x54 -#define DA9210_REG_MASK_B 0x55 - -static const u8 da9210_mask_regs[] = { - DA9210_REG_MASK_A, - DA9210_REG_MASK_B, -}; - -static void da9xxx_mask_irqs(struct i2c_client *client, const u8 regs[], - unsigned int nregs) -{ - unsigned int i; - dev_info(&client->dev, "Masking %s interrupt sources\n", client->name); +static void __iomem *irqc; - for (i = 0; i < nregs; i++) { - int error = i2c_smbus_write_byte_data(client, regs[i], ~0); - if (error) { - dev_err(&client->dev, "i2c error %d\n", error); - return; - } - } -} +/* first byte sets the memory pointer, following are consecutive reg values */ +static u8 da9063_irq_clr[] = { DA9063_REG_IRQ_MASK_A, 0xff, 0xff, 0xff, 0xff }; +static u8 da9210_irq_clr[] = { DA9210_REG_MASK_A, 0xff, 0xff }; + +static struct i2c_msg da9xxx_msgs[2] = { + { + .addr = 0x58, + .len = ARRAY_SIZE(da9063_irq_clr), + .buf = da9063_irq_clr, + }, { + .addr = 0x68, + .len = ARRAY_SIZE(da9210_irq_clr), + .buf = da9210_irq_clr, + }, +}; static int regulator_quirk_notify(struct notifier_block *nb, unsigned long action, void *data) @@ -93,12 +80,15 @@ static int regulator_quirk_notify(struct notifier_block *nb, client = to_i2c_client(dev); dev_dbg(dev, "Detected %s\n", client->name); - if ((client->addr == 0x58 && !strcmp(client->name, "da9063"))) - da9xxx_mask_irqs(client, da9063_mask_regs, - ARRAY_SIZE(da9063_mask_regs)); - else if (client->addr == 0x68 && !strcmp(client->name, "da9210")) - da9xxx_mask_irqs(client, da9210_mask_regs, - ARRAY_SIZE(da9210_mask_regs)); + if ((client->addr == 0x58 && !strcmp(client->name, "da9063")) || + (client->addr == 0x68 && !strcmp(client->name, "da9210"))) { + int ret; + + dev_info(&client->dev, "clearing da9063/da9210 interrupts\n"); + ret = i2c_transfer(client->adapter, da9xxx_msgs, ARRAY_SIZE(da9xxx_msgs)); + if (ret != ARRAY_SIZE(da9xxx_msgs)) + dev_err(&client->dev, "i2c error %d\n", ret); + } mon = ioread32(irqc + IRQC_MONITOR); if (mon & REGULATOR_IRQ_MASK) diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig index b7260c2b510c..1b6cae5e78f4 100644 --- a/arch/arm/mach-spear/Kconfig +++ b/arch/arm/mach-spear/Kconfig @@ -20,7 +20,6 @@ config ARCH_SPEAR13XX select HAVE_ARM_TWD if SMP select PINCTRL select MFD_SYSCON - select MIGHT_HAVE_PCI help Supports for ARM's SPEAR13XX family diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig index b0cc26284fc9..c257d40ca51d 100644 --- a/arch/arm/mach-versatile/Kconfig +++ b/arch/arm/mach-versatile/Kconfig @@ -9,7 +9,6 @@ config ARCH_VERSATILE select CPU_ARM926T select ICST select MFD_SYSCON - select MIGHT_HAVE_PCI select PLAT_VERSATILE select POWER_RESET select POWER_RESET_VERSATILE diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index d15a7fe51618..c1799dd1d0d9 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -403,6 +403,7 @@ config CPU_V7M bool select CPU_32v7M select CPU_ABRT_NOMMU + select CPU_CACHE_V7M select CPU_CACHE_NOP select CPU_PABRT_LEGACY select CPU_THUMBONLY @@ -518,6 +519,9 @@ config CPU_CACHE_VIPT config CPU_CACHE_FA bool +config CPU_CACHE_V7M + bool + if MMU # The copy-page model config CPU_COPY_V4WT @@ -750,14 +754,14 @@ config CPU_HIGH_VECTOR config CPU_ICACHE_DISABLE bool "Disable I-Cache (I-bit)" - depends on CPU_CP15 && !(CPU_ARM720T || CPU_ARM740T || CPU_XSCALE || CPU_XSC3) + depends on (CPU_CP15 && !(CPU_ARM720T || CPU_ARM740T || CPU_XSCALE || CPU_XSC3)) || CPU_V7M help Say Y here to disable the processor instruction cache. Unless you have a reason not to or are unsure, say N. config CPU_DCACHE_DISABLE bool "Disable D-Cache (C-bit)" - depends on CPU_CP15 && !SMP + depends on (CPU_CP15 && !SMP) || CPU_V7M help Say Y here to disable the processor data cache. Unless you have a reason not to or are unsure, say N. @@ -792,7 +796,7 @@ config CPU_CACHE_ROUND_ROBIN config CPU_BPREDICT_DISABLE bool "Disable branch prediction" - depends on CPU_ARM1020 || CPU_V6 || CPU_V6K || CPU_MOHAWK || CPU_XSC3 || CPU_V7 || CPU_FA526 + depends on CPU_ARM1020 || CPU_V6 || CPU_V6K || CPU_MOHAWK || CPU_XSC3 || CPU_V7 || CPU_FA526 || CPU_V7M help Say Y here to disable branch prediction. If unsure, say N. @@ -916,6 +920,13 @@ config CACHE_L2X0 help This option enables the L2x0 PrimeCell. +config CACHE_L2X0_PMU + bool "L2x0 performance monitor support" if CACHE_L2X0 + depends on PERF_EVENTS + help + This option enables support for the performance monitoring features + of the L220 and PL310 outer cache controllers. + if CACHE_L2X0 config PL310_ERRATA_588369 diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index 7f76d96ce546..e8698241ece9 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -43,9 +43,11 @@ obj-$(CONFIG_CPU_CACHE_V6) += cache-v6.o obj-$(CONFIG_CPU_CACHE_V7) += cache-v7.o obj-$(CONFIG_CPU_CACHE_FA) += cache-fa.o obj-$(CONFIG_CPU_CACHE_NOP) += cache-nop.o +obj-$(CONFIG_CPU_CACHE_V7M) += cache-v7m.o AFLAGS_cache-v6.o :=-Wa,-march=armv6 AFLAGS_cache-v7.o :=-Wa,-march=armv7-a +AFLAGS_cache-v7m.o :=-Wa,-march=armv7-m obj-$(CONFIG_CPU_COPY_V4WT) += copypage-v4wt.o obj-$(CONFIG_CPU_COPY_V4WB) += copypage-v4wb.o @@ -101,6 +103,7 @@ AFLAGS_proc-v7.o :=-Wa,-march=armv7-a obj-$(CONFIG_OUTER_CACHE) += l2c-common.o obj-$(CONFIG_CACHE_FEROCEON_L2) += cache-feroceon-l2.o obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o l2c-l2x0-resume.o +obj-$(CONFIG_CACHE_L2X0_PMU) += cache-l2x0-pmu.o obj-$(CONFIG_CACHE_XSC3L2) += cache-xsc3l2.o obj-$(CONFIG_CACHE_TAUROS2) += cache-tauros2.o obj-$(CONFIG_CACHE_UNIPHIER) += cache-uniphier.o diff --git a/arch/arm/mm/cache-l2x0-pmu.c b/arch/arm/mm/cache-l2x0-pmu.c new file mode 100644 index 000000000000..976d3057272e --- /dev/null +++ b/arch/arm/mm/cache-l2x0-pmu.c @@ -0,0 +1,584 @@ +/* + * L220/L310 cache controller support + * + * Copyright (C) 2016 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/errno.h> +#include <linux/hrtimer.h> +#include <linux/io.h> +#include <linux/list.h> +#include <linux/perf_event.h> +#include <linux/printk.h> +#include <linux/slab.h> +#include <linux/types.h> + +#include <asm/hardware/cache-l2x0.h> + +#define PMU_NR_COUNTERS 2 + +static void __iomem *l2x0_base; +static struct pmu *l2x0_pmu; +static cpumask_t pmu_cpu; + +static const char *l2x0_name; + +static ktime_t l2x0_pmu_poll_period; +static struct hrtimer l2x0_pmu_hrtimer; + +/* + * The L220/PL310 PMU has two equivalent counters, Counter1 and Counter0. + * Registers controlling these are laid out in pairs, in descending order, i.e. + * the register for Counter1 comes first, followed by the register for + * Counter0. + * We ensure that idx 0 -> Counter0, and idx1 -> Counter1. + */ +static struct perf_event *events[PMU_NR_COUNTERS]; + +/* Find an unused counter */ +static int l2x0_pmu_find_idx(void) +{ + int i; + + for (i = 0; i < PMU_NR_COUNTERS; i++) { + if (!events[i]) + return i; + } + + return -1; +} + +/* How many counters are allocated? */ +static int l2x0_pmu_num_active_counters(void) +{ + int i, cnt = 0; + + for (i = 0; i < PMU_NR_COUNTERS; i++) { + if (events[i]) + cnt++; + } + + return cnt; +} + +static void l2x0_pmu_counter_config_write(int idx, u32 val) +{ + writel_relaxed(val, l2x0_base + L2X0_EVENT_CNT0_CFG - 4 * idx); +} + +static u32 l2x0_pmu_counter_read(int idx) +{ + return readl_relaxed(l2x0_base + L2X0_EVENT_CNT0_VAL - 4 * idx); +} + +static void l2x0_pmu_counter_write(int idx, u32 val) +{ + writel_relaxed(val, l2x0_base + L2X0_EVENT_CNT0_VAL - 4 * idx); +} + +static void __l2x0_pmu_enable(void) +{ + u32 val = readl_relaxed(l2x0_base + L2X0_EVENT_CNT_CTRL); + val |= L2X0_EVENT_CNT_CTRL_ENABLE; + writel_relaxed(val, l2x0_base + L2X0_EVENT_CNT_CTRL); +} + +static void __l2x0_pmu_disable(void) +{ + u32 val = readl_relaxed(l2x0_base + L2X0_EVENT_CNT_CTRL); + val &= ~L2X0_EVENT_CNT_CTRL_ENABLE; + writel_relaxed(val, l2x0_base + L2X0_EVENT_CNT_CTRL); +} + +static void l2x0_pmu_enable(struct pmu *pmu) +{ + if (l2x0_pmu_num_active_counters() == 0) + return; + + __l2x0_pmu_enable(); +} + +static void l2x0_pmu_disable(struct pmu *pmu) +{ + if (l2x0_pmu_num_active_counters() == 0) + return; + + __l2x0_pmu_disable(); +} + +static void warn_if_saturated(u32 count) +{ + if (count != 0xffffffff) + return; + + pr_warn_ratelimited("L2X0 counter saturated. Poll period too long\n"); +} + +static void l2x0_pmu_event_read(struct perf_event *event) +{ + struct hw_perf_event *hw = &event->hw; + u64 prev_count, new_count, mask; + + do { + prev_count = local64_read(&hw->prev_count); + new_count = l2x0_pmu_counter_read(hw->idx); + } while (local64_xchg(&hw->prev_count, new_count) != prev_count); + + mask = GENMASK_ULL(31, 0); + local64_add((new_count - prev_count) & mask, &event->count); + + warn_if_saturated(new_count); +} + +static void l2x0_pmu_event_configure(struct perf_event *event) +{ + struct hw_perf_event *hw = &event->hw; + + /* + * The L2X0 counters saturate at 0xffffffff rather than wrapping, so we + * will *always* lose some number of events when a counter saturates, + * and have no way of detecting how many were lost. + * + * To minimize the impact of this, we try to maximize the period by + * always starting counters at zero. To ensure that group ratios are + * representative, we poll periodically to avoid counters saturating. + * See l2x0_pmu_poll(). + */ + local64_set(&hw->prev_count, 0); + l2x0_pmu_counter_write(hw->idx, 0); +} + +static enum hrtimer_restart l2x0_pmu_poll(struct hrtimer *hrtimer) +{ + unsigned long flags; + int i; + + local_irq_save(flags); + __l2x0_pmu_disable(); + + for (i = 0; i < PMU_NR_COUNTERS; i++) { + struct perf_event *event = events[i]; + + if (!event) + continue; + + l2x0_pmu_event_read(event); + l2x0_pmu_event_configure(event); + } + + __l2x0_pmu_enable(); + local_irq_restore(flags); + + hrtimer_forward_now(hrtimer, l2x0_pmu_poll_period); + return HRTIMER_RESTART; +} + + +static void __l2x0_pmu_event_enable(int idx, u32 event) +{ + u32 val; + + val = event << L2X0_EVENT_CNT_CFG_SRC_SHIFT; + val |= L2X0_EVENT_CNT_CFG_INT_DISABLED; + l2x0_pmu_counter_config_write(idx, val); +} + +static void l2x0_pmu_event_start(struct perf_event *event, int flags) +{ + struct hw_perf_event *hw = &event->hw; + + if (WARN_ON_ONCE(!(event->hw.state & PERF_HES_STOPPED))) + return; + + if (flags & PERF_EF_RELOAD) { + WARN_ON_ONCE(!(hw->state & PERF_HES_UPTODATE)); + l2x0_pmu_event_configure(event); + } + + hw->state = 0; + + __l2x0_pmu_event_enable(hw->idx, hw->config_base); +} + +static void __l2x0_pmu_event_disable(int idx) +{ + u32 val; + + val = L2X0_EVENT_CNT_CFG_SRC_DISABLED << L2X0_EVENT_CNT_CFG_SRC_SHIFT; + val |= L2X0_EVENT_CNT_CFG_INT_DISABLED; + l2x0_pmu_counter_config_write(idx, val); +} + +static void l2x0_pmu_event_stop(struct perf_event *event, int flags) +{ + struct hw_perf_event *hw = &event->hw; + + if (WARN_ON_ONCE(event->hw.state & PERF_HES_STOPPED)) + return; + + __l2x0_pmu_event_disable(hw->idx); + + hw->state |= PERF_HES_STOPPED; + + if (flags & PERF_EF_UPDATE) { + l2x0_pmu_event_read(event); + hw->state |= PERF_HES_UPTODATE; + } +} + +static int l2x0_pmu_event_add(struct perf_event *event, int flags) +{ + struct hw_perf_event *hw = &event->hw; + int idx = l2x0_pmu_find_idx(); + + if (idx == -1) + return -EAGAIN; + + /* + * Pin the timer, so that the overflows are handled by the chosen + * event->cpu (this is the same one as presented in "cpumask" + * attribute). + */ + if (l2x0_pmu_num_active_counters() == 0) + hrtimer_start(&l2x0_pmu_hrtimer, l2x0_pmu_poll_period, + HRTIMER_MODE_REL_PINNED); + + events[idx] = event; + hw->idx = idx; + + l2x0_pmu_event_configure(event); + + hw->state = PERF_HES_STOPPED | PERF_HES_UPTODATE; + + if (flags & PERF_EF_START) + l2x0_pmu_event_start(event, 0); + + return 0; +} + +static void l2x0_pmu_event_del(struct perf_event *event, int flags) +{ + struct hw_perf_event *hw = &event->hw; + + l2x0_pmu_event_stop(event, PERF_EF_UPDATE); + + events[hw->idx] = NULL; + hw->idx = -1; + + if (l2x0_pmu_num_active_counters() == 0) + hrtimer_cancel(&l2x0_pmu_hrtimer); +} + +static bool l2x0_pmu_group_is_valid(struct perf_event *event) +{ + struct pmu *pmu = event->pmu; + struct perf_event *leader = event->group_leader; + struct perf_event *sibling; + int num_hw = 0; + + if (leader->pmu == pmu) + num_hw++; + else if (!is_software_event(leader)) + return false; + + list_for_each_entry(sibling, &leader->sibling_list, group_entry) { + if (sibling->pmu == pmu) + num_hw++; + else if (!is_software_event(sibling)) + return false; + } + + return num_hw <= PMU_NR_COUNTERS; +} + +static int l2x0_pmu_event_init(struct perf_event *event) +{ + struct hw_perf_event *hw = &event->hw; + + if (event->attr.type != l2x0_pmu->type) + return -ENOENT; + + if (is_sampling_event(event) || + event->attach_state & PERF_ATTACH_TASK) + return -EINVAL; + + if (event->attr.exclude_user || + event->attr.exclude_kernel || + event->attr.exclude_hv || + event->attr.exclude_idle || + event->attr.exclude_host || + event->attr.exclude_guest) + return -EINVAL; + + if (event->cpu < 0) + return -EINVAL; + + if (event->attr.config & ~L2X0_EVENT_CNT_CFG_SRC_MASK) + return -EINVAL; + + hw->config_base = event->attr.config; + + if (!l2x0_pmu_group_is_valid(event)) + return -EINVAL; + + event->cpu = cpumask_first(&pmu_cpu); + + return 0; +} + +struct l2x0_event_attribute { + struct device_attribute attr; + unsigned int config; + bool pl310_only; +}; + +#define L2X0_EVENT_ATTR(_name, _config, _pl310_only) \ + (&((struct l2x0_event_attribute[]) {{ \ + .attr = __ATTR(_name, S_IRUGO, l2x0_pmu_event_show, NULL), \ + .config = _config, \ + .pl310_only = _pl310_only, \ + }})[0].attr.attr) + +#define L220_PLUS_EVENT_ATTR(_name, _config) \ + L2X0_EVENT_ATTR(_name, _config, false) + +#define PL310_EVENT_ATTR(_name, _config) \ + L2X0_EVENT_ATTR(_name, _config, true) + +static ssize_t l2x0_pmu_event_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct l2x0_event_attribute *lattr; + + lattr = container_of(attr, typeof(*lattr), attr); + return snprintf(buf, PAGE_SIZE, "config=0x%x\n", lattr->config); +} + +static umode_t l2x0_pmu_event_attr_is_visible(struct kobject *kobj, + struct attribute *attr, + int unused) +{ + struct device *dev = kobj_to_dev(kobj); + struct pmu *pmu = dev_get_drvdata(dev); + struct l2x0_event_attribute *lattr; + + lattr = container_of(attr, typeof(*lattr), attr.attr); + + if (!lattr->pl310_only || strcmp("l2c_310", pmu->name) == 0) + return attr->mode; + + return 0; +} + +static struct attribute *l2x0_pmu_event_attrs[] = { + L220_PLUS_EVENT_ATTR(co, 0x1), + L220_PLUS_EVENT_ATTR(drhit, 0x2), + L220_PLUS_EVENT_ATTR(drreq, 0x3), + L220_PLUS_EVENT_ATTR(dwhit, 0x4), + L220_PLUS_EVENT_ATTR(dwreq, 0x5), + L220_PLUS_EVENT_ATTR(dwtreq, 0x6), + L220_PLUS_EVENT_ATTR(irhit, 0x7), + L220_PLUS_EVENT_ATTR(irreq, 0x8), + L220_PLUS_EVENT_ATTR(wa, 0x9), + PL310_EVENT_ATTR(ipfalloc, 0xa), + PL310_EVENT_ATTR(epfhit, 0xb), + PL310_EVENT_ATTR(epfalloc, 0xc), + PL310_EVENT_ATTR(srrcvd, 0xd), + PL310_EVENT_ATTR(srconf, 0xe), + PL310_EVENT_ATTR(epfrcvd, 0xf), + NULL +}; + +static struct attribute_group l2x0_pmu_event_attrs_group = { + .name = "events", + .attrs = l2x0_pmu_event_attrs, + .is_visible = l2x0_pmu_event_attr_is_visible, +}; + +static ssize_t l2x0_pmu_cpumask_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return cpumap_print_to_pagebuf(true, buf, &pmu_cpu); +} + +static struct device_attribute l2x0_pmu_cpumask_attr = + __ATTR(cpumask, S_IRUGO, l2x0_pmu_cpumask_show, NULL); + +static struct attribute *l2x0_pmu_cpumask_attrs[] = { + &l2x0_pmu_cpumask_attr.attr, + NULL, +}; + +static struct attribute_group l2x0_pmu_cpumask_attr_group = { + .attrs = l2x0_pmu_cpumask_attrs, +}; + +static const struct attribute_group *l2x0_pmu_attr_groups[] = { + &l2x0_pmu_event_attrs_group, + &l2x0_pmu_cpumask_attr_group, + NULL, +}; + +static void l2x0_pmu_reset(void) +{ + int i; + + __l2x0_pmu_disable(); + + for (i = 0; i < PMU_NR_COUNTERS; i++) + __l2x0_pmu_event_disable(i); +} + +static int l2x0_pmu_offline_cpu(unsigned int cpu) +{ + unsigned int target; + + if (!cpumask_test_and_clear_cpu(cpu, &pmu_cpu)) + return 0; + + target = cpumask_any_but(cpu_online_mask, cpu); + if (target >= nr_cpu_ids) + return 0; + + perf_pmu_migrate_context(l2x0_pmu, cpu, target); + cpumask_set_cpu(target, &pmu_cpu); + + return 0; +} + +void l2x0_pmu_suspend(void) +{ + int i; + + if (!l2x0_pmu) + return; + + l2x0_pmu_disable(l2x0_pmu); + + for (i = 0; i < PMU_NR_COUNTERS; i++) { + if (events[i]) + l2x0_pmu_event_stop(events[i], PERF_EF_UPDATE); + } + +} + +void l2x0_pmu_resume(void) +{ + int i; + + if (!l2x0_pmu) + return; + + l2x0_pmu_reset(); + + for (i = 0; i < PMU_NR_COUNTERS; i++) { + if (events[i]) + l2x0_pmu_event_start(events[i], PERF_EF_RELOAD); + } + + l2x0_pmu_enable(l2x0_pmu); +} + +void __init l2x0_pmu_register(void __iomem *base, u32 part) +{ + /* + * Determine whether we support the PMU, and choose the name for sysfs. + * This is also used by l2x0_pmu_event_attr_is_visible to determine + * which events to display, as the PL310 PMU supports a superset of + * L220 events. + * + * The L210 PMU has a different programmer's interface, and is not + * supported by this driver. + * + * We must defer registering the PMU until the perf subsystem is up and + * running, so just stash the name and base, and leave that to another + * initcall. + */ + switch (part & L2X0_CACHE_ID_PART_MASK) { + case L2X0_CACHE_ID_PART_L220: + l2x0_name = "l2c_220"; + break; + case L2X0_CACHE_ID_PART_L310: + l2x0_name = "l2c_310"; + break; + default: + return; + } + + l2x0_base = base; +} + +static __init int l2x0_pmu_init(void) +{ + int ret; + + if (!l2x0_base) + return 0; + + l2x0_pmu = kzalloc(sizeof(*l2x0_pmu), GFP_KERNEL); + if (!l2x0_pmu) { + pr_warn("Unable to allocate L2x0 PMU\n"); + return -ENOMEM; + } + + *l2x0_pmu = (struct pmu) { + .task_ctx_nr = perf_invalid_context, + .pmu_enable = l2x0_pmu_enable, + .pmu_disable = l2x0_pmu_disable, + .read = l2x0_pmu_event_read, + .start = l2x0_pmu_event_start, + .stop = l2x0_pmu_event_stop, + .add = l2x0_pmu_event_add, + .del = l2x0_pmu_event_del, + .event_init = l2x0_pmu_event_init, + .attr_groups = l2x0_pmu_attr_groups, + }; + + l2x0_pmu_reset(); + + /* + * We always use a hrtimer rather than an interrupt. + * See comments in l2x0_pmu_event_configure and l2x0_pmu_poll. + * + * Polling once a second allows the counters to fill up to 1/128th on a + * quad-core test chip with cores clocked at 400MHz. Hopefully this + * leaves sufficient headroom to avoid overflow on production silicon + * at higher frequencies. + */ + l2x0_pmu_poll_period = ms_to_ktime(1000); + hrtimer_init(&l2x0_pmu_hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + l2x0_pmu_hrtimer.function = l2x0_pmu_poll; + + cpumask_set_cpu(0, &pmu_cpu); + ret = cpuhp_setup_state_nocalls(CPUHP_AP_PERF_ARM_L2X0_ONLINE, + "AP_PERF_ARM_L2X0_ONLINE", NULL, + l2x0_pmu_offline_cpu); + if (ret) + goto out_pmu; + + ret = perf_pmu_register(l2x0_pmu, l2x0_name, -1); + if (ret) + goto out_cpuhp; + + return 0; + +out_cpuhp: + cpuhp_remove_state_nocalls(CPUHP_AP_PERF_ARM_L2X0_ONLINE); +out_pmu: + kfree(l2x0_pmu); + l2x0_pmu = NULL; + return ret; +} +device_initcall(l2x0_pmu_init); diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index cc12905ae6f8..d1870c777c6e 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -142,6 +142,8 @@ static void l2c_disable(void) { void __iomem *base = l2x0_base; + l2x0_pmu_suspend(); + outer_cache.flush_all(); l2c_write_sec(0, base, L2X0_CTRL); dsb(st); @@ -159,6 +161,8 @@ static void l2c_resume(void) /* Do not touch the controller if already enabled. */ if (!(readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN)) l2c_enable(base, l2x0_data->num_lock); + + l2x0_pmu_resume(); } /* @@ -709,9 +713,8 @@ static void __init l2c310_fixup(void __iomem *base, u32 cache_id, if (revision >= L310_CACHE_ID_RTL_R3P0 && revision < L310_CACHE_ID_RTL_R3P2) { u32 val = l2x0_saved_regs.prefetch_ctrl; - /* I don't think bit23 is required here... but iMX6 does so */ - if (val & (BIT(30) | BIT(23))) { - val &= ~(BIT(30) | BIT(23)); + if (val & L310_PREFETCH_CTRL_DBL_LINEFILL) { + val &= ~L310_PREFETCH_CTRL_DBL_LINEFILL; l2x0_saved_regs.prefetch_ctrl = val; errata[n++] = "752271"; } @@ -892,6 +895,8 @@ static int __init __l2c_init(const struct l2c_init_data *data, pr_info("%s: CACHE_ID 0x%08x, AUX_CTRL 0x%08x\n", data->type, cache_id, aux); + l2x0_pmu_register(l2x0_base, cache_id); + return 0; } diff --git a/arch/arm/mm/cache-v7m.S b/arch/arm/mm/cache-v7m.S new file mode 100644 index 000000000000..816a7e44e6f1 --- /dev/null +++ b/arch/arm/mm/cache-v7m.S @@ -0,0 +1,453 @@ +/* + * linux/arch/arm/mm/cache-v7m.S + * + * Based on linux/arch/arm/mm/cache-v7.S + * + * Copyright (C) 2001 Deep Blue Solutions Ltd. + * Copyright (C) 2005 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This is the "shell" of the ARMv7M processor support. + */ +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/assembler.h> +#include <asm/errno.h> +#include <asm/unwind.h> +#include <asm/v7m.h> + +#include "proc-macros.S" + +/* Generic V7M read/write macros for memory mapped cache operations */ +.macro v7m_cache_read, rt, reg + movw \rt, #:lower16:BASEADDR_V7M_SCB + \reg + movt \rt, #:upper16:BASEADDR_V7M_SCB + \reg + ldr \rt, [\rt] +.endm + +.macro v7m_cacheop, rt, tmp, op, c = al + movw\c \tmp, #:lower16:BASEADDR_V7M_SCB + \op + movt\c \tmp, #:upper16:BASEADDR_V7M_SCB + \op + str\c \rt, [\tmp] +.endm + + +.macro read_ccsidr, rt + v7m_cache_read \rt, V7M_SCB_CCSIDR +.endm + +.macro read_clidr, rt + v7m_cache_read \rt, V7M_SCB_CLIDR +.endm + +.macro write_csselr, rt, tmp + v7m_cacheop \rt, \tmp, V7M_SCB_CSSELR +.endm + +/* + * dcisw: Invalidate data cache by set/way + */ +.macro dcisw, rt, tmp + v7m_cacheop \rt, \tmp, V7M_SCB_DCISW +.endm + +/* + * dccisw: Clean and invalidate data cache by set/way + */ +.macro dccisw, rt, tmp + v7m_cacheop \rt, \tmp, V7M_SCB_DCCISW +.endm + +/* + * dccimvac: Clean and invalidate data cache line by MVA to PoC. + */ +.irp c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo +.macro dccimvac\c, rt, tmp + v7m_cacheop \rt, \tmp, V7M_SCB_DCCIMVAC, \c +.endm +.endr + +/* + * dcimvac: Invalidate data cache line by MVA to PoC + */ +.macro dcimvac, rt, tmp + v7m_cacheop \rt, \tmp, V7M_SCB_DCIMVAC +.endm + +/* + * dccmvau: Clean data cache line by MVA to PoU + */ +.macro dccmvau, rt, tmp + v7m_cacheop \rt, \tmp, V7M_SCB_DCCMVAU +.endm + +/* + * dccmvac: Clean data cache line by MVA to PoC + */ +.macro dccmvac, rt, tmp + v7m_cacheop \rt, \tmp, V7M_SCB_DCCMVAC +.endm + +/* + * icimvau: Invalidate instruction caches by MVA to PoU + */ +.macro icimvau, rt, tmp + v7m_cacheop \rt, \tmp, V7M_SCB_ICIMVAU +.endm + +/* + * Invalidate the icache, inner shareable if SMP, invalidate BTB for UP. + * rt data ignored by ICIALLU(IS), so can be used for the address + */ +.macro invalidate_icache, rt + v7m_cacheop \rt, \rt, V7M_SCB_ICIALLU + mov \rt, #0 +.endm + +/* + * Invalidate the BTB, inner shareable if SMP. + * rt data ignored by BPIALL, so it can be used for the address + */ +.macro invalidate_bp, rt + v7m_cacheop \rt, \rt, V7M_SCB_BPIALL + mov \rt, #0 +.endm + +ENTRY(v7m_invalidate_l1) + mov r0, #0 + + write_csselr r0, r1 + read_ccsidr r0 + + movw r1, #0x7fff + and r2, r1, r0, lsr #13 + + movw r1, #0x3ff + + and r3, r1, r0, lsr #3 @ NumWays - 1 + add r2, r2, #1 @ NumSets + + and r0, r0, #0x7 + add r0, r0, #4 @ SetShift + + clz r1, r3 @ WayShift + add r4, r3, #1 @ NumWays +1: sub r2, r2, #1 @ NumSets-- + mov r3, r4 @ Temp = NumWays +2: subs r3, r3, #1 @ Temp-- + mov r5, r3, lsl r1 + mov r6, r2, lsl r0 + orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift) + dcisw r5, r6 + bgt 2b + cmp r2, #0 + bgt 1b + dsb st + isb + ret lr +ENDPROC(v7m_invalidate_l1) + +/* + * v7m_flush_icache_all() + * + * Flush the whole I-cache. + * + * Registers: + * r0 - set to 0 + */ +ENTRY(v7m_flush_icache_all) + invalidate_icache r0 + ret lr +ENDPROC(v7m_flush_icache_all) + +/* + * v7m_flush_dcache_all() + * + * Flush the whole D-cache. + * + * Corrupted registers: r0-r7, r9-r11 + */ +ENTRY(v7m_flush_dcache_all) + dmb @ ensure ordering with previous memory accesses + read_clidr r0 + mov r3, r0, lsr #23 @ move LoC into position + ands r3, r3, #7 << 1 @ extract LoC*2 from clidr + beq finished @ if loc is 0, then no need to clean +start_flush_levels: + mov r10, #0 @ start clean at cache level 0 +flush_levels: + add r2, r10, r10, lsr #1 @ work out 3x current cache level + mov r1, r0, lsr r2 @ extract cache type bits from clidr + and r1, r1, #7 @ mask of the bits for current cache only + cmp r1, #2 @ see what cache we have at this level + blt skip @ skip if no cache, or just i-cache +#ifdef CONFIG_PREEMPT + save_and_disable_irqs_notrace r9 @ make cssr&csidr read atomic +#endif + write_csselr r10, r1 @ set current cache level + isb @ isb to sych the new cssr&csidr + read_ccsidr r1 @ read the new csidr +#ifdef CONFIG_PREEMPT + restore_irqs_notrace r9 +#endif + and r2, r1, #7 @ extract the length of the cache lines + add r2, r2, #4 @ add 4 (line length offset) + movw r4, #0x3ff + ands r4, r4, r1, lsr #3 @ find maximum number on the way size + clz r5, r4 @ find bit position of way size increment + movw r7, #0x7fff + ands r7, r7, r1, lsr #13 @ extract max number of the index size +loop1: + mov r9, r7 @ create working copy of max index +loop2: + lsl r6, r4, r5 + orr r11, r10, r6 @ factor way and cache number into r11 + lsl r6, r9, r2 + orr r11, r11, r6 @ factor index number into r11 + dccisw r11, r6 @ clean/invalidate by set/way + subs r9, r9, #1 @ decrement the index + bge loop2 + subs r4, r4, #1 @ decrement the way + bge loop1 +skip: + add r10, r10, #2 @ increment cache number + cmp r3, r10 + bgt flush_levels +finished: + mov r10, #0 @ swith back to cache level 0 + write_csselr r10, r3 @ select current cache level in cssr + dsb st + isb + ret lr +ENDPROC(v7m_flush_dcache_all) + +/* + * v7m_flush_cache_all() + * + * Flush the entire cache system. + * The data cache flush is now achieved using atomic clean / invalidates + * working outwards from L1 cache. This is done using Set/Way based cache + * maintenance instructions. + * The instruction cache can still be invalidated back to the point of + * unification in a single instruction. + * + */ +ENTRY(v7m_flush_kern_cache_all) + stmfd sp!, {r4-r7, r9-r11, lr} + bl v7m_flush_dcache_all + invalidate_icache r0 + ldmfd sp!, {r4-r7, r9-r11, lr} + ret lr +ENDPROC(v7m_flush_kern_cache_all) + +/* + * v7m_flush_cache_all() + * + * Flush all TLB entries in a particular address space + * + * - mm - mm_struct describing address space + */ +ENTRY(v7m_flush_user_cache_all) + /*FALLTHROUGH*/ + +/* + * v7m_flush_cache_range(start, end, flags) + * + * Flush a range of TLB entries in the specified address space. + * + * - start - start address (may not be aligned) + * - end - end address (exclusive, may not be aligned) + * - flags - vm_area_struct flags describing address space + * + * It is assumed that: + * - we have a VIPT cache. + */ +ENTRY(v7m_flush_user_cache_range) + ret lr +ENDPROC(v7m_flush_user_cache_all) +ENDPROC(v7m_flush_user_cache_range) + +/* + * v7m_coherent_kern_range(start,end) + * + * Ensure that the I and D caches are coherent within specified + * region. This is typically used when code has been written to + * a memory region, and will be executed. + * + * - start - virtual start address of region + * - end - virtual end address of region + * + * It is assumed that: + * - the Icache does not read data from the write buffer + */ +ENTRY(v7m_coherent_kern_range) + /* FALLTHROUGH */ + +/* + * v7m_coherent_user_range(start,end) + * + * Ensure that the I and D caches are coherent within specified + * region. This is typically used when code has been written to + * a memory region, and will be executed. + * + * - start - virtual start address of region + * - end - virtual end address of region + * + * It is assumed that: + * - the Icache does not read data from the write buffer + */ +ENTRY(v7m_coherent_user_range) + UNWIND(.fnstart ) + dcache_line_size r2, r3 + sub r3, r2, #1 + bic r12, r0, r3 +1: +/* + * We use open coded version of dccmvau otherwise USER() would + * point at movw instruction. + */ + dccmvau r12, r3 + add r12, r12, r2 + cmp r12, r1 + blo 1b + dsb ishst + icache_line_size r2, r3 + sub r3, r2, #1 + bic r12, r0, r3 +2: + icimvau r12, r3 + add r12, r12, r2 + cmp r12, r1 + blo 2b + invalidate_bp r0 + dsb ishst + isb + ret lr + UNWIND(.fnend ) +ENDPROC(v7m_coherent_kern_range) +ENDPROC(v7m_coherent_user_range) + +/* + * v7m_flush_kern_dcache_area(void *addr, size_t size) + * + * Ensure that the data held in the page kaddr is written back + * to the page in question. + * + * - addr - kernel address + * - size - region size + */ +ENTRY(v7m_flush_kern_dcache_area) + dcache_line_size r2, r3 + add r1, r0, r1 + sub r3, r2, #1 + bic r0, r0, r3 +1: + dccimvac r0, r3 @ clean & invalidate D line / unified line + add r0, r0, r2 + cmp r0, r1 + blo 1b + dsb st + ret lr +ENDPROC(v7m_flush_kern_dcache_area) + +/* + * v7m_dma_inv_range(start,end) + * + * Invalidate the data cache within the specified region; we will + * be performing a DMA operation in this region and we want to + * purge old data in the cache. + * + * - start - virtual start address of region + * - end - virtual end address of region + */ +v7m_dma_inv_range: + dcache_line_size r2, r3 + sub r3, r2, #1 + tst r0, r3 + bic r0, r0, r3 + dccimvacne r0, r3 + subne r3, r2, #1 @ restore r3, corrupted by v7m's dccimvac + tst r1, r3 + bic r1, r1, r3 + dccimvacne r1, r3 +1: + dcimvac r0, r3 + add r0, r0, r2 + cmp r0, r1 + blo 1b + dsb st + ret lr +ENDPROC(v7m_dma_inv_range) + +/* + * v7m_dma_clean_range(start,end) + * - start - virtual start address of region + * - end - virtual end address of region + */ +v7m_dma_clean_range: + dcache_line_size r2, r3 + sub r3, r2, #1 + bic r0, r0, r3 +1: + dccmvac r0, r3 @ clean D / U line + add r0, r0, r2 + cmp r0, r1 + blo 1b + dsb st + ret lr +ENDPROC(v7m_dma_clean_range) + +/* + * v7m_dma_flush_range(start,end) + * - start - virtual start address of region + * - end - virtual end address of region + */ +ENTRY(v7m_dma_flush_range) + dcache_line_size r2, r3 + sub r3, r2, #1 + bic r0, r0, r3 +1: + dccimvac r0, r3 @ clean & invalidate D / U line + add r0, r0, r2 + cmp r0, r1 + blo 1b + dsb st + ret lr +ENDPROC(v7m_dma_flush_range) + +/* + * dma_map_area(start, size, dir) + * - start - kernel virtual start address + * - size - size of region + * - dir - DMA direction + */ +ENTRY(v7m_dma_map_area) + add r1, r1, r0 + teq r2, #DMA_FROM_DEVICE + beq v7m_dma_inv_range + b v7m_dma_clean_range +ENDPROC(v7m_dma_map_area) + +/* + * dma_unmap_area(start, size, dir) + * - start - kernel virtual start address + * - size - size of region + * - dir - DMA direction + */ +ENTRY(v7m_dma_unmap_area) + add r1, r1, r0 + teq r2, #DMA_TO_DEVICE + bne v7m_dma_inv_range + ret lr +ENDPROC(v7m_dma_unmap_area) + + .globl v7m_flush_kern_cache_louis + .equ v7m_flush_kern_cache_louis, v7m_flush_kern_cache_all + + __INITDATA + + @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) + define_cache_functions v7m diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index c6834c0cfd1c..ab4f74536057 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -436,7 +436,7 @@ static int __init atomic_pool_init(void) gen_pool_set_algo(atomic_pool, gen_pool_first_fit_order_align, (void *)PAGE_SHIFT); - pr_info("DMA: preallocated %zd KiB pool for atomic coherent allocations\n", + pr_info("DMA: preallocated %zu KiB pool for atomic coherent allocations\n", atomic_pool_size / 1024); return 0; } @@ -445,7 +445,7 @@ destroy_genpool: gen_pool_destroy(atomic_pool); atomic_pool = NULL; out: - pr_err("DMA: failed to allocate %zx KiB pool for atomic coherent allocation\n", + pr_err("DMA: failed to allocate %zu KiB pool for atomic coherent allocation\n", atomic_pool_size / 1024); return -ENOMEM; } @@ -2014,6 +2014,63 @@ static void arm_iommu_unmap_page(struct device *dev, dma_addr_t handle, __free_iova(mapping, iova, len); } +/** + * arm_iommu_map_resource - map a device resource for DMA + * @dev: valid struct device pointer + * @phys_addr: physical address of resource + * @size: size of resource to map + * @dir: DMA transfer direction + */ +static dma_addr_t arm_iommu_map_resource(struct device *dev, + phys_addr_t phys_addr, size_t size, + enum dma_data_direction dir, unsigned long attrs) +{ + struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev); + dma_addr_t dma_addr; + int ret, prot; + phys_addr_t addr = phys_addr & PAGE_MASK; + unsigned int offset = phys_addr & ~PAGE_MASK; + size_t len = PAGE_ALIGN(size + offset); + + dma_addr = __alloc_iova(mapping, len); + if (dma_addr == DMA_ERROR_CODE) + return dma_addr; + + prot = __dma_direction_to_prot(dir) | IOMMU_MMIO; + + ret = iommu_map(mapping->domain, dma_addr, addr, len, prot); + if (ret < 0) + goto fail; + + return dma_addr + offset; +fail: + __free_iova(mapping, dma_addr, len); + return DMA_ERROR_CODE; +} + +/** + * arm_iommu_unmap_resource - unmap a device DMA resource + * @dev: valid struct device pointer + * @dma_handle: DMA address to resource + * @size: size of resource to map + * @dir: DMA transfer direction + */ +static void arm_iommu_unmap_resource(struct device *dev, dma_addr_t dma_handle, + size_t size, enum dma_data_direction dir, + unsigned long attrs) +{ + struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev); + dma_addr_t iova = dma_handle & PAGE_MASK; + unsigned int offset = dma_handle & ~PAGE_MASK; + size_t len = PAGE_ALIGN(size + offset); + + if (!iova) + return; + + iommu_unmap(mapping->domain, iova, len); + __free_iova(mapping, iova, len); +} + static void arm_iommu_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size, enum dma_data_direction dir) { @@ -2057,6 +2114,9 @@ struct dma_map_ops iommu_ops = { .unmap_sg = arm_iommu_unmap_sg, .sync_sg_for_cpu = arm_iommu_sync_sg_for_cpu, .sync_sg_for_device = arm_iommu_sync_sg_for_device, + + .map_resource = arm_iommu_map_resource, + .unmap_resource = arm_iommu_unmap_resource, }; struct dma_map_ops iommu_coherent_ops = { @@ -2070,6 +2130,9 @@ struct dma_map_ops iommu_coherent_ops = { .map_sg = arm_coherent_iommu_map_sg, .unmap_sg = arm_coherent_iommu_unmap_sg, + + .map_resource = arm_iommu_map_resource, + .unmap_resource = arm_iommu_unmap_resource, }; /** diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 6344913f0804..4001dd15818d 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -137,7 +137,7 @@ void __init init_default_cache_policy(unsigned long pmd) initial_pmd_value = pmd; - pmd &= PMD_SECT_TEX(1) | PMD_SECT_BUFFERABLE | PMD_SECT_CACHEABLE; + pmd &= PMD_SECT_CACHE_MASK; for (i = 0; i < ARRAY_SIZE(cache_policies); i++) if (cache_policies[i].pmd == pmd) { @@ -243,7 +243,7 @@ __setup("noalign", noalign_setup); #define PROT_PTE_S2_DEVICE PROT_PTE_DEVICE #define PROT_SECT_DEVICE PMD_TYPE_SECT|PMD_SECT_AP_WRITE -static struct mem_type mem_types[] = { +static struct mem_type mem_types[] __ro_after_init = { [MT_DEVICE] = { /* Strongly ordered / ARMv6 shared device */ .prot_pte = PROT_PTE_DEVICE | L_PTE_MT_DEV_SHARED | L_PTE_SHARED, diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index c671f345266a..0d40c285bd86 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S @@ -7,6 +7,10 @@ #include <asm/asm-offsets.h> #include <asm/thread_info.h> +#ifdef CONFIG_CPU_V7M +#include <asm/v7m.h> +#endif + /* * vma_vm_mm - get mm pointer from vma pointer (vma->vm_mm) */ @@ -70,7 +74,13 @@ * on ARMv7. */ .macro dcache_line_size, reg, tmp +#ifdef CONFIG_CPU_V7M + movw \tmp, #:lower16:BASEADDR_V7M_SCB + V7M_SCB_CTR + movt \tmp, #:upper16:BASEADDR_V7M_SCB + V7M_SCB_CTR + ldr \tmp, [\tmp] +#else mrc p15, 0, \tmp, c0, c0, 1 @ read ctr +#endif lsr \tmp, \tmp, #16 and \tmp, \tmp, #0xf @ cache line size encoding mov \reg, #4 @ bytes per word @@ -82,7 +92,13 @@ * on ARMv7. */ .macro icache_line_size, reg, tmp +#ifdef CONFIG_CPU_V7M + movw \tmp, #:lower16:BASEADDR_V7M_SCB + V7M_SCB_CTR + movt \tmp, #:upper16:BASEADDR_V7M_SCB + V7M_SCB_CTR + ldr \tmp, [\tmp] +#else mrc p15, 0, \tmp, c0, c0, 1 @ read ctr +#endif and \tmp, \tmp, #0xf @ cache line size encoding mov \reg, #4 @ bytes per word mov \reg, \reg, lsl \tmp @ actual cache line size diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index a7123b4e129d..d00d52c9de3e 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -16,6 +16,7 @@ #include <asm/hwcap.h> #include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> +#include <asm/memory.h> #include "proc-macros.S" diff --git a/arch/arm/mm/proc-v7m.S b/arch/arm/mm/proc-v7m.S index 7229d8d0be1a..f6d333f09bfe 100644 --- a/arch/arm/mm/proc-v7m.S +++ b/arch/arm/mm/proc-v7m.S @@ -74,14 +74,42 @@ ENTRY(cpu_v7m_do_resume) ENDPROC(cpu_v7m_do_resume) #endif +ENTRY(cpu_cm7_dcache_clean_area) + dcache_line_size r2, r3 + movw r3, #:lower16:BASEADDR_V7M_SCB + V7M_SCB_DCCMVAC + movt r3, #:upper16:BASEADDR_V7M_SCB + V7M_SCB_DCCMVAC + +1: str r0, [r3] @ clean D entry + add r0, r0, r2 + subs r1, r1, r2 + bhi 1b + dsb + ret lr +ENDPROC(cpu_cm7_dcache_clean_area) + +ENTRY(cpu_cm7_proc_fin) + movw r2, #:lower16:(BASEADDR_V7M_SCB + V7M_SCB_CCR) + movt r2, #:upper16:(BASEADDR_V7M_SCB + V7M_SCB_CCR) + ldr r0, [r2] + bic r0, r0, #(V7M_SCB_CCR_DC | V7M_SCB_CCR_IC) + str r0, [r2] + ret lr +ENDPROC(cpu_cm7_proc_fin) + .section ".text.init", #alloc, #execinstr +__v7m_cm7_setup: + mov r8, #(V7M_SCB_CCR_DC | V7M_SCB_CCR_IC| V7M_SCB_CCR_BP) + b __v7m_setup_cont /* * __v7m_setup * * This should be able to cover all ARMv7-M cores. */ __v7m_setup: + mov r8, 0 + +__v7m_setup_cont: @ Configure the vector table base address ldr r0, =BASEADDR_V7M_SCB ldr r12, =vector_table @@ -104,6 +132,7 @@ __v7m_setup: badr r1, 1f ldr r5, [r12, #11 * 4] @ read the SVC vector entry str r1, [r12, #11 * 4] @ write the temporary SVC vector entry + dsb mov r6, lr @ save LR ldr sp, =init_thread_union + THREAD_START_SP cpsie i @@ -116,15 +145,32 @@ __v7m_setup: mov r1, #1 msr control, r1 @ Thread mode has unpriviledged access + @ Configure caches (if implemented) + teq r8, #0 + stmneia r12, {r0-r6, lr} @ v7m_invalidate_l1 touches r0-r6 + blne v7m_invalidate_l1 + teq r8, #0 @ re-evalutae condition + ldmneia r12, {r0-r6, lr} + @ Configure the System Control Register to ensure 8-byte stack alignment @ Note the STKALIGN bit is either RW or RAO. - ldr r12, [r0, V7M_SCB_CCR] @ system control register - orr r12, #V7M_SCB_CCR_STKALIGN - str r12, [r0, V7M_SCB_CCR] + ldr r0, [r0, V7M_SCB_CCR] @ system control register + orr r0, #V7M_SCB_CCR_STKALIGN + orr r0, r0, r8 + ret lr ENDPROC(__v7m_setup) +/* + * Cortex-M7 processor functions + */ + globl_equ cpu_cm7_proc_init, cpu_v7m_proc_init + globl_equ cpu_cm7_reset, cpu_v7m_reset + globl_equ cpu_cm7_do_idle, cpu_v7m_do_idle + globl_equ cpu_cm7_switch_mm, cpu_v7m_switch_mm + define_processor_functions v7m, dabort=nommu_early_abort, pabort=legacy_pabort, nommu=1 + define_processor_functions cm7, dabort=nommu_early_abort, pabort=legacy_pabort, nommu=1 .section ".rodata" string cpu_arch_name, "armv7m" @@ -133,6 +179,50 @@ ENDPROC(__v7m_setup) .section ".proc.info.init", #alloc +.macro __v7m_proc name, initfunc, cache_fns = nop_cache_fns, hwcaps = 0, proc_fns = v7m_processor_functions + .long 0 /* proc_info_list.__cpu_mm_mmu_flags */ + .long 0 /* proc_info_list.__cpu_io_mmu_flags */ + initfn \initfunc, \name + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_HALF | HWCAP_THUMB | HWCAP_FAST_MULT | \hwcaps + .long cpu_v7m_name + .long \proc_fns + .long 0 /* proc_info_list.tlb */ + .long 0 /* proc_info_list.user */ + .long \cache_fns +.endm + + /* + * Match ARM Cortex-M7 processor. + */ + .type __v7m_cm7_proc_info, #object +__v7m_cm7_proc_info: + .long 0x410fc270 /* ARM Cortex-M7 0xC27 */ + .long 0xff0ffff0 /* Mask off revision, patch release */ + __v7m_proc __v7m_cm7_proc_info, __v7m_cm7_setup, hwcaps = HWCAP_EDSP, cache_fns = v7m_cache_fns, proc_fns = cm7_processor_functions + .size __v7m_cm7_proc_info, . - __v7m_cm7_proc_info + + /* + * Match ARM Cortex-M4 processor. + */ + .type __v7m_cm4_proc_info, #object +__v7m_cm4_proc_info: + .long 0x410fc240 /* ARM Cortex-M4 0xC24 */ + .long 0xff0ffff0 /* Mask off revision, patch release */ + __v7m_proc __v7m_cm4_proc_info, __v7m_setup, hwcaps = HWCAP_EDSP + .size __v7m_cm4_proc_info, . - __v7m_cm4_proc_info + + /* + * Match ARM Cortex-M3 processor. + */ + .type __v7m_cm3_proc_info, #object +__v7m_cm3_proc_info: + .long 0x410fc230 /* ARM Cortex-M3 0xC23 */ + .long 0xff0ffff0 /* Mask off revision, patch release */ + __v7m_proc __v7m_cm3_proc_info, __v7m_setup + .size __v7m_cm3_proc_info, . - __v7m_cm3_proc_info + /* * Match any ARMv7-M processor core. */ @@ -140,16 +230,6 @@ ENDPROC(__v7m_setup) __v7m_proc_info: .long 0x000f0000 @ Required ID value .long 0x000f0000 @ Mask for ID - .long 0 @ proc_info_list.__cpu_mm_mmu_flags - .long 0 @ proc_info_list.__cpu_io_mmu_flags - initfn __v7m_setup, __v7m_proc_info @ proc_info_list.__cpu_flush - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT - .long cpu_v7m_name - .long v7m_processor_functions @ proc_info_list.proc - .long 0 @ proc_info_list.tlb - .long 0 @ proc_info_list.user - .long nop_cache_fns @ proc_info_list.cache + __v7m_proc __v7m_proc_info, __v7m_setup .size __v7m_proc_info, . - __v7m_proc_info diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index 3d2cef6488ea..f193414d0f6f 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -170,9 +170,6 @@ static int xen_starting_cpu(unsigned int cpu) pr_info("Xen: initializing cpu%d\n", cpu); vcpup = per_cpu_ptr(xen_vcpu_info, cpu); - /* Direct vCPU id mapping for ARM guests. */ - per_cpu(xen_vcpu_id, cpu) = cpu; - info.mfn = virt_to_gfn(vcpup); info.offset = xen_offset_in_page(vcpup); @@ -330,6 +327,7 @@ static int __init xen_guest_init(void) { struct xen_add_to_physmap xatp; struct shared_info *shared_info_page = NULL; + int cpu; if (!xen_domain()) return 0; @@ -380,7 +378,8 @@ static int __init xen_guest_init(void) return -ENOMEM; /* Direct vCPU id mapping for ARM guests. */ - per_cpu(xen_vcpu_id, 0) = 0; + for_each_possible_cpu(cpu) + per_cpu(xen_vcpu_id, cpu) = cpu; xen_auto_xlat_grant_frames.count = gnttab_max_grant_frames(); if (xen_xlate_map_ballooned_pages(&xen_auto_xlat_grant_frames.pfn, |