diff options
Diffstat (limited to 'arch/arm')
186 files changed, 900 insertions, 3972 deletions
diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 07ab3d203916..7451b447cc2d 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -312,6 +312,9 @@ INSTALL_TARGETS = zinstall uinstall install PHONY += bzImage $(BOOT_TARGETS) $(INSTALL_TARGETS) +bootpImage uImage: zImage +zImage: Image + $(BOOT_TARGETS): vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts index 0d35ab64641c..7106114c7464 100644 --- a/arch/arm/boot/dts/am335x-pepper.dts +++ b/arch/arm/boot/dts/am335x-pepper.dts @@ -74,6 +74,7 @@ audio_codec: tlv320aic3106@1b { compatible = "ti,tlv320aic3106"; reg = <0x1b>; + ai3x-micbias-vg = <0x2>; }; accel: lis331dlh@1d { @@ -153,7 +154,7 @@ ti,audio-routing = "Headphone Jack", "HPLOUT", "Headphone Jack", "HPROUT", - "LINE1L", "Line In"; + "MIC3L", "Mic3L Switch"; }; &mcasp0 { @@ -438,41 +439,50 @@ regulators { dcdc1_reg: regulator@0 { /* VDD_1V8 system supply */ + regulator-always-on; }; dcdc2_reg: regulator@1 { /* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_core"; regulator-min-microvolt = <925000>; - regulator-max-microvolt = <1325000>; + regulator-max-microvolt = <1150000>; regulator-boot-on; + regulator-always-on; }; dcdc3_reg: regulator@2 { /* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <925000>; - regulator-max-microvolt = <1150000>; + regulator-max-microvolt = <1325000>; regulator-boot-on; + regulator-always-on; }; ldo1_reg: regulator@3 { /* VRTC 1.8V always-on supply */ + regulator-name = "vrtc,vdds"; regulator-always-on; }; ldo2_reg: regulator@4 { /* 3.3V rail */ + regulator-name = "vdd_3v3aux"; + regulator-always-on; }; ldo3_reg: regulator@5 { /* VDD_3V3A 3.3V rail */ + regulator-name = "vdd_3v3a"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; ldo4_reg: regulator@6 { /* VDD_3V3B 3.3V rail */ + regulator-name = "vdd_3v3b"; + regulator-always-on; }; }; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 21fcc440fc1a..b76f9a2ce05d 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -210,7 +210,7 @@ }; uart0: serial@44e09000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart1"; clock-frequency = <48000000>; reg = <0x44e09000 0x2000>; @@ -221,7 +221,7 @@ }; uart1: serial@48022000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart2"; clock-frequency = <48000000>; reg = <0x48022000 0x2000>; @@ -232,7 +232,7 @@ }; uart2: serial@48024000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart3"; clock-frequency = <48000000>; reg = <0x48024000 0x2000>; @@ -243,7 +243,7 @@ }; uart3: serial@481a6000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart4"; clock-frequency = <48000000>; reg = <0x481a6000 0x2000>; @@ -252,7 +252,7 @@ }; uart4: serial@481a8000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart5"; clock-frequency = <48000000>; reg = <0x481a8000 0x2000>; @@ -261,7 +261,7 @@ }; uart5: serial@481aa000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart6"; clock-frequency = <48000000>; reg = <0x481aa000 0x2000>; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index a63bf78191ea..f9a4b317ed2f 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -693,3 +693,7 @@ }; }; }; + +&pcie1 { + gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/cros-ec-keyboard.dtsi b/arch/arm/boot/dts/cros-ec-keyboard.dtsi index 9c7fb0acae79..4e42f30cb318 100644 --- a/arch/arm/boot/dts/cros-ec-keyboard.dtsi +++ b/arch/arm/boot/dts/cros-ec-keyboard.dtsi @@ -22,6 +22,7 @@ MATRIX_KEY(0x00, 0x02, KEY_F1) MATRIX_KEY(0x00, 0x03, KEY_B) MATRIX_KEY(0x00, 0x04, KEY_F10) + MATRIX_KEY(0x00, 0x05, KEY_RO) MATRIX_KEY(0x00, 0x06, KEY_N) MATRIX_KEY(0x00, 0x08, KEY_EQUAL) MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT) @@ -34,6 +35,7 @@ MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE) MATRIX_KEY(0x01, 0x09, KEY_F9) MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE) + MATRIX_KEY(0x01, 0x0c, KEY_HENKAN) MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL) MATRIX_KEY(0x02, 0x01, KEY_TAB) @@ -45,6 +47,7 @@ MATRIX_KEY(0x02, 0x07, KEY_102ND) MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE) MATRIX_KEY(0x02, 0x09, KEY_F8) + MATRIX_KEY(0x02, 0x0a, KEY_YEN) MATRIX_KEY(0x03, 0x01, KEY_GRAVE) MATRIX_KEY(0x03, 0x02, KEY_F2) @@ -53,6 +56,7 @@ MATRIX_KEY(0x03, 0x06, KEY_6) MATRIX_KEY(0x03, 0x08, KEY_MINUS) MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH) + MATRIX_KEY(0x03, 0x0c, KEY_MUHENKAN) MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL) MATRIX_KEY(0x04, 0x01, KEY_A) diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index aa465904f6cc..096f68be99e2 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -686,7 +686,8 @@ &dcan1 { status = "ok"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&dcan1_pins_default>; + pinctrl-names = "default", "sleep", "active"; + pinctrl-0 = <&dcan1_pins_sleep>; pinctrl-1 = <&dcan1_pins_sleep>; + pinctrl-2 = <&dcan1_pins_default>; }; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 8f1e25bcecbd..b058b3146874 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -116,7 +116,7 @@ ranges = <0 0x2000 0x2000>; scm_conf: scm_conf@0 { - compatible = "syscon"; + compatible = "syscon", "simple-bus"; reg = <0x0 0x1400>; #address-cells = <1>; #size-cells = <1>; @@ -211,7 +211,7 @@ #address-cells = <1>; ranges = <0x51000000 0x51000000 0x3000 0x0 0x20000000 0x10000000>; - pcie@51000000 { + pcie1: pcie@51000000 { compatible = "ti,dra7-pcie"; reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>; reg-names = "rc_dbics", "ti_conf", "config"; @@ -397,7 +397,7 @@ }; uart1: serial@4806a000 { - compatible = "ti,omap4-uart"; + compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x4806a000 0x100>; interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart1"; @@ -408,7 +408,7 @@ }; uart2: serial@4806c000 { - compatible = "ti,omap4-uart"; + compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x4806c000 0x100>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart2"; @@ -419,7 +419,7 @@ }; uart3: serial@48020000 { - compatible = "ti,omap4-uart"; + compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x48020000 0x100>; interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart3"; @@ -430,7 +430,7 @@ }; uart4: serial@4806e000 { - compatible = "ti,omap4-uart"; + compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x4806e000 0x100>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart4"; @@ -441,7 +441,7 @@ }; uart5: serial@48066000 { - compatible = "ti,omap4-uart"; + compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x48066000 0x100>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart5"; @@ -452,7 +452,7 @@ }; uart6: serial@48068000 { - compatible = "ti,omap4-uart"; + compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x48068000 0x100>; interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart6"; @@ -463,7 +463,7 @@ }; uart7: serial@48420000 { - compatible = "ti,omap4-uart"; + compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x48420000 0x100>; interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart7"; @@ -472,7 +472,7 @@ }; uart8: serial@48422000 { - compatible = "ti,omap4-uart"; + compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x48422000 0x100>; interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart8"; @@ -481,7 +481,7 @@ }; uart9: serial@48424000 { - compatible = "ti,omap4-uart"; + compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x48424000 0x100>; interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart9"; @@ -490,7 +490,7 @@ }; uart10: serial@4ae2b000 { - compatible = "ti,omap4-uart"; + compatible = "ti,dra742-uart", "ti,omap4-uart"; reg = <0x4ae2b000 0x100>; interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart10"; @@ -1140,6 +1140,7 @@ ctrl-module = <&omap_control_sata>; clocks = <&sys_clkin1>, <&sata_ref_clk>; clock-names = "sysclk", "refclk"; + syscon-pllreset = <&scm_conf 0x3fc>; #phy-cells = <0>; }; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 4e1b60581782..803738414086 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -587,9 +587,10 @@ &dcan1 { status = "ok"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&dcan1_pins_default>; + pinctrl-names = "default", "sleep", "active"; + pinctrl-0 = <&dcan1_pins_sleep>; pinctrl-1 = <&dcan1_pins_sleep>; + pinctrl-2 = <&dcan1_pins_default>; }; &qspi { diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index d7201333e3bc..2db99433e17f 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -138,8 +138,8 @@ mipi_phy: video-phy@10020710 { compatible = "samsung,s5pv210-mipi-video-phy"; - reg = <0x10020710 8>; #phy-cells = <1>; + syscon = <&pmu_system_controller>; }; pd_cam: cam-power-domain@10023C00 { diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index e0abfc3324d1..e050d85cdacd 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -127,6 +127,10 @@ }; }; +&cpu0 { + cpu0-supply = <&buck1_reg>; +}; + &fimd { pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 98f3ce65cb9a..ba34886f8b65 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -188,6 +188,10 @@ }; }; +&cpu0 { + cpu0-supply = <&varm_breg>; +}; + &dsi_0 { vddcore-supply = <&vusb_reg>; vddio-supply = <&vmipi_reg>; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index d4f2b11319dd..775892b2cc6a 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -548,6 +548,10 @@ }; }; +&cpu0 { + cpu0-supply = <&vdd_arm_reg>; +}; + &pinctrl_1 { hdmi_hpd: hdmi-hpd { samsung,pins = "gpx3-7"; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 10d3c173396e..3e5ba665d200 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -40,6 +40,18 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0x900>; + clocks = <&clock CLK_ARM_CLK>; + clock-names = "cpu"; + clock-latency = <160000>; + + operating-points = < + 1200000 1250000 + 1000000 1150000 + 800000 1075000 + 500000 975000 + 400000 975000 + 200000 950000 + >; cooling-min-level = <4>; cooling-max-level = <2>; #cooling-cells = <2>; /* min followed by max */ diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index c892d58e8dad..b995333ea22b 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -468,6 +468,7 @@ interrupts = <36 37 38 39 40 41 42 43 44>; status = "disabled"; clocks = <&clks 26>; + #io-channel-cells = <1>; }; spdif@80054000 { diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts index dd45e6971bc3..9351296356dc 100644 --- a/arch/arm/boot/dts/imx25-pdk.dts +++ b/arch/arm/boot/dts/imx25-pdk.dts @@ -10,6 +10,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include "imx25.dtsi" @@ -114,8 +115,8 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - cd-gpios = <&gpio2 1 0>; - wp-gpios = <&gpio2 0 0>; + cd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index bc215e4b75fd..b69be5c499cf 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -108,7 +108,7 @@ }; gpt1: timer@10003000 { - compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; reg = <0x10003000 0x1000>; interrupts = <26>; clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>, @@ -117,7 +117,7 @@ }; gpt2: timer@10004000 { - compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; reg = <0x10004000 0x1000>; interrupts = <25>; clocks = <&clks IMX27_CLK_GPT2_IPG_GATE>, @@ -126,7 +126,7 @@ }; gpt3: timer@10005000 { - compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; reg = <0x10005000 0x1000>; interrupts = <24>; clocks = <&clks IMX27_CLK_GPT3_IPG_GATE>, @@ -376,7 +376,7 @@ }; gpt4: timer@10019000 { - compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; reg = <0x10019000 0x1000>; interrupts = <4>; clocks = <&clks IMX27_CLK_GPT4_IPG_GATE>, @@ -385,7 +385,7 @@ }; gpt5: timer@1001a000 { - compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; reg = <0x1001a000 0x1000>; interrupts = <3>; clocks = <&clks IMX27_CLK_GPT5_IPG_GATE>, @@ -436,7 +436,7 @@ }; gpt6: timer@1001f000 { - compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; reg = <0x1001f000 0x1000>; interrupts = <2>; clocks = <&clks IMX27_CLK_GPT6_IPG_GATE>, diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index b6478e97d6a7..e6540b5cfa4c 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -286,8 +286,8 @@ can1: can@53fe4000 { compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan"; reg = <0x53fe4000 0x1000>; - clocks = <&clks 33>; - clock-names = "ipg"; + clocks = <&clks 33>, <&clks 33>; + clock-names = "ipg", "per"; interrupts = <43>; status = "disabled"; }; @@ -295,8 +295,8 @@ can2: can@53fe8000 { compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan"; reg = <0x53fe8000 0x1000>; - clocks = <&clks 34>; - clock-names = "ipg"; + clocks = <&clks 34>, <&clks 34>; + clock-names = "ipg", "per"; interrupts = <44>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts index 93d3ea12328c..0f3fe29b816e 100644 --- a/arch/arm/boot/dts/imx51-apf51dev.dts +++ b/arch/arm/boot/dts/imx51-apf51dev.dts @@ -98,7 +98,7 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - cd-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio2 29 GPIO_ACTIVE_LOW>; bus-width = <4>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index e9337ad52f59..3bc18835fb4b 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -103,8 +103,8 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - cd-gpios = <&gpio1 1 0>; - wp-gpios = <&gpio1 9 0>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts index d0e0f57eb432..53f40885c530 100644 --- a/arch/arm/boot/dts/imx53-m53evk.dts +++ b/arch/arm/boot/dts/imx53-m53evk.dts @@ -124,8 +124,8 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - cd-gpios = <&gpio1 1 0>; - wp-gpios = <&gpio1 9 0>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index 181ae5ebf23f..b0d5542ac829 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -147,8 +147,8 @@ &esdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc3>; - cd-gpios = <&gpio3 11 0>; - wp-gpios = <&gpio3 12 0>; + cd-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>; bus-width = <8>; status = "okay"; }; @@ -295,9 +295,10 @@ &tve { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_vga_sync>; + ddc-i2c-bus = <&i2c2>; fsl,tve-mode = "vga"; - fsl,hsync-pin = <4>; - fsl,vsync-pin = <6>; + fsl,hsync-pin = <7>; /* IPU DI1 PIN7 via EIM_OE */ + fsl,vsync-pin = <8>; /* IPU DI1 PIN8 via EIM_RW */ status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 1d325576bcc0..fc89ce1e5763 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -41,8 +41,8 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - cd-gpios = <&gpio3 13 0>; - wp-gpios = <&gpio4 11 0>; + cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi index 4f1f0e2868bf..e03373a58760 100644 --- a/arch/arm/boot/dts/imx53-tqma53.dtsi +++ b/arch/arm/boot/dts/imx53-tqma53.dtsi @@ -41,8 +41,8 @@ pinctrl-0 = <&pinctrl_esdhc2>, <&pinctrl_esdhc2_cdwp>; vmmc-supply = <®_3p3v>; - wp-gpios = <&gpio1 2 0>; - cd-gpios = <&gpio1 4 0>; + wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index 704bd72cbfec..d3e50b22064f 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -183,7 +183,7 @@ }; &esdhc1 { - cd-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; fsl,wp-controller; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; @@ -191,7 +191,7 @@ }; &esdhc2 { - cd-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; fsl,wp-controller; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc2>; diff --git a/arch/arm/boot/dts/imx53-voipac-bsb.dts b/arch/arm/boot/dts/imx53-voipac-bsb.dts index c17d3ad6dba5..fc51b87ad208 100644 --- a/arch/arm/boot/dts/imx53-voipac-bsb.dts +++ b/arch/arm/boot/dts/imx53-voipac-bsb.dts @@ -119,8 +119,8 @@ &esdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc2>; - cd-gpios = <&gpio3 25 0>; - wp-gpios = <&gpio2 19 0>; + cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index 43cb3fd76be7..5111f5170d53 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -305,8 +305,8 @@ &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; - cd-gpios = <&gpio1 4 0>; - wp-gpios = <&gpio1 2 0>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v>; status = "okay"; }; @@ -314,8 +314,8 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 0>; - wp-gpios = <&gpio7 1 0>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index 78df05e9d1ce..d6515f7a56c4 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -11,6 +11,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "imx6q.dtsi" / { @@ -196,8 +197,8 @@ }; &usdhc3 { - cd-gpios = <&gpio6 11 0>; - wp-gpios = <&gpio6 14 0>; + cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3 diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts index 703539cf36d3..00bd63e63d0c 100644 --- a/arch/arm/boot/dts/imx6q-gk802.dts +++ b/arch/arm/boot/dts/imx6q-gk802.dts @@ -7,6 +7,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "imx6q.dtsi" / { @@ -161,7 +162,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; bus-width = <4>; - cd-gpios = <&gpio6 11 0>; + cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts index a43abfa21e33..5645d52850a7 100644 --- a/arch/arm/boot/dts/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts @@ -251,7 +251,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <4>; - cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; @@ -260,7 +260,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; bus-width = <4>; - cd-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi index e6d9195a1da7..f4d6ae564ead 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi @@ -173,7 +173,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; vmmc-supply = <®_3p3v>; - cd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -181,7 +181,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; vmmc-supply = <®_3p3v>; - cd-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi index 1d85de2befb3..a47a0399a172 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi @@ -392,7 +392,7 @@ &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; - cd-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; no-1-8-v; status = "okay"; }; @@ -400,7 +400,7 @@ &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; - cd-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; no-1-8-v; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index 59e5d15e3ec4..ff41f83551de 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -258,6 +258,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>; vmmc-supply = <®_3p3v>; - cd-gpios = <&gpio1 4 0>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi index 2c253d6d20bd..45e7c39e80d5 100644 --- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi +++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi @@ -1,3 +1,5 @@ +#include <dt-bindings/gpio/gpio.h> + / { regulators { compatible = "simple-bus"; @@ -181,7 +183,7 @@ &usdhc2 { /* module slot */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; - cd-gpios = <&gpio2 2 0>; + cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index b5756c21ea1d..4493f6e99330 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -318,7 +318,7 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index 86f03c1b147c..a857d1294609 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -324,7 +324,7 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 4a8d97f47759..1afe3385e2d2 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -417,7 +417,7 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi index 62a82f3eba88..6dd0b764e036 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi @@ -299,6 +299,6 @@ &pinctrl_hummingboard_usdhc2 >; vmmc-supply = <®_3p3v>; - cd-gpios = <&gpio1 4 0>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 3af16dfe417b..d7fe6672d00c 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -453,7 +453,7 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 0>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; @@ -461,7 +461,7 @@ &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; - cd-gpios = <&gpio2 6 0>; + cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 1ce6133b67f5..9e6ecd99b472 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -409,8 +409,8 @@ &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; - cd-gpios = <&gpio1 4 0>; - wp-gpios = <&gpio1 2 0>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; status = "disabled"; }; @@ -418,7 +418,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3 &pinctrl_usdhc3_cdwp>; - cd-gpios = <&gpio1 27 0>; - wp-gpios = <&gpio1 29 0>; + cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi index 488a640796ac..3373fd958e95 100644 --- a/arch/arm/boot/dts/imx6qdl-rex.dtsi +++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi @@ -342,7 +342,7 @@ pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <4>; cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -351,6 +351,6 @@ pinctrl-0 = <&pinctrl_usdhc3>; bus-width = <4>; cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 3b24b12651b2..e329ca5c3322 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -467,8 +467,8 @@ pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; - cd-gpios = <&gpio6 15 0>; - wp-gpios = <&gpio1 13 0>; + cd-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index e00c44f6a0df..782379320517 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -448,8 +448,8 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 0>; - wp-gpios = <&gpio7 1 0>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v>; status = "okay"; }; @@ -457,7 +457,7 @@ &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; - cd-gpios = <&gpio2 6 0>; + cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index a626e6dd8022..944eb81cb2b8 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -562,8 +562,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <8>; - cd-gpios = <&gpio2 2 0>; - wp-gpios = <&gpio2 3 0>; + cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -571,8 +571,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; bus-width = <8>; - cd-gpios = <&gpio2 0 0>; - wp-gpios = <&gpio2 1 0>; + cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index f02b80b41d4f..da08de324e9e 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -680,7 +680,7 @@ pinctrl-0 = <&pinctrl_usdhc1>; bus-width = <4>; no-1-8-v; - cd-gpios = <&gpio7 2 0>; + cd-gpios = <&gpio7 2 GPIO_ACTIVE_LOW>; fsl,wp-controller; status = "okay"; }; @@ -690,7 +690,7 @@ pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <4>; no-1-8-v; - cd-gpios = <&gpio7 3 0>; + cd-gpios = <&gpio7 3 GPIO_ACTIVE_LOW>; fsl,wp-controller; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index 5fb091675582..9e096d811bed 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -9,6 +9,8 @@ * */ +#include <dt-bindings/gpio/gpio.h> + / { regulators { compatible = "simple-bus"; @@ -250,13 +252,13 @@ &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; - cd-gpios = <&gpio1 2 0>; + cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; status = "okay"; }; &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio3 9 0>; + cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index e6d13592080d..10d0b26c93f1 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -181,10 +181,10 @@ interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_PCIE_AXI>, <&clks IMX6QDL_CLK_LVDS1_GATE>, <&clks IMX6QDL_CLK_PCIE_REF_125M>; @@ -836,10 +836,31 @@ reg = <0x02100000 0x100000>; ranges; - caam@02100000 { - reg = <0x02100000 0x40000>; - interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>, - <0 106 IRQ_TYPE_LEVEL_HIGH>; + crypto: caam@2100000 { + compatible = "fsl,sec-v4.0"; + fsl,sec-era = <4>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2100000 0x10000>; + ranges = <0 0x2100000 0x10000>; + interrupt-parent = <&intc>; + clocks = <&clks IMX6QDL_CLK_CAAM_MEM>, + <&clks IMX6QDL_CLK_CAAM_ACLK>, + <&clks IMX6QDL_CLK_CAAM_IPG>, + <&clks IMX6QDL_CLK_EIM_SLOW>; + clock-names = "mem", "aclk", "ipg", "emi_slow"; + + sec_jr0: jr0@1000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr1: jr1@2000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + }; }; aipstz@0217c000 { /* AIPSTZ2 */ diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 945887d3fdb3..b84dff2e94ea 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -617,8 +617,8 @@ pinctrl-1 = <&pinctrl_usdhc1_100mhz>; pinctrl-2 = <&pinctrl_usdhc1_200mhz>; bus-width = <8>; - cd-gpios = <&gpio4 7 0>; - wp-gpios = <&gpio4 6 0>; + cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -627,8 +627,8 @@ pinctrl-0 = <&pinctrl_usdhc2>; pinctrl-1 = <&pinctrl_usdhc2_100mhz>; pinctrl-2 = <&pinctrl_usdhc2_200mhz>; - cd-gpios = <&gpio5 0 0>; - wp-gpios = <&gpio4 29 0>; + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -637,6 +637,6 @@ pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; - cd-gpios = <&gpio3 22 0>; + cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts index e3c0b63c2205..115f3fd78971 100644 --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts @@ -49,7 +49,7 @@ pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; bus-width = <8>; - cd-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; keep-power-in-suspend; enable-sdio-wakeup; @@ -61,7 +61,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; bus-width = <8>; - cd-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>; no-1-8-v; keep-power-in-suspend; enable-sdio-wakup; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index cef04cef3a80..ac88c3467078 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -293,7 +293,7 @@ pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; bus-width = <8>; - cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; keep-power-in-suspend; enable-sdio-wakeup; @@ -304,7 +304,7 @@ &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; - cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 708175d59b9c..e6223d8e79af 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -738,6 +738,33 @@ reg = <0x02100000 0x100000>; ranges; + crypto: caam@2100000 { + compatible = "fsl,sec-v4.0"; + fsl,sec-era = <4>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2100000 0x10000>; + ranges = <0 0x2100000 0x10000>; + interrupt-parent = <&intc>; + clocks = <&clks IMX6SX_CLK_CAAM_MEM>, + <&clks IMX6SX_CLK_CAAM_ACLK>, + <&clks IMX6SX_CLK_CAAM_IPG>, + <&clks IMX6SX_CLK_EIM_SLOW>; + clock-names = "mem", "aclk", "ipg", "emi_slow"; + + sec_jr0: jr0@1000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr1: jr1@2000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + usbotg1: usb@02184000 { compatible = "fsl,imx6sx-usb", "fsl,imx27-usb"; reg = <0x02184000 0x200>; diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 4d1a4b977d84..fdd1d7c9a5cc 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -234,8 +234,8 @@ &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; - cd-gpios = <&gpio5 0 0>; - wp-gpios = <&gpio5 1 0>; + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; enable-sdio-wakeup; keep-power-in-suspend; status = "okay"; diff --git a/arch/arm/boot/dts/k2e-clocks.dtsi b/arch/arm/boot/dts/k2e-clocks.dtsi index 4773d6af66a0..d56d68fe7ffc 100644 --- a/arch/arm/boot/dts/k2e-clocks.dtsi +++ b/arch/arm/boot/dts/k2e-clocks.dtsi @@ -13,9 +13,8 @@ clocks { #clock-cells = <0>; compatible = "ti,keystone,main-pll-clock"; clocks = <&refclksys>; - reg = <0x02620350 4>, <0x02310110 4>; - reg-names = "control", "multiplier"; - fixed-postdiv = <2>; + reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>; + reg-names = "control", "multiplier", "post-divider"; }; papllclk: papllclk@2620358 { diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi index 50e555eab50d..675fb8e492c6 100644 --- a/arch/arm/boot/dts/k2e.dtsi +++ b/arch/arm/boot/dts/k2e.dtsi @@ -86,7 +86,7 @@ gpio,syscon-dev = <&devctrl 0x240>; }; - pcie@21020000 { + pcie1: pcie@21020000 { compatible = "ti,keystone-pcie","snps,dw-pcie"; clocks = <&clkpcie1>; clock-names = "pcie"; @@ -96,6 +96,7 @@ ranges = <0x81000000 0 0 0x23260000 0x4000 0x4000 0x82000000 0 0x60000000 0x60000000 0 0x10000000>; + status = "disabled"; device_type = "pci"; num-lanes = <2>; @@ -130,10 +131,17 @@ <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>; }; }; + + mdio: mdio@24200f00 { + compatible = "ti,keystone_mdio", "ti,davinci_mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x24200f00 0x100>; + status = "disabled"; + clocks = <&clkcpgmac>; + clock-names = "fck"; + bus_freq = <2500000>; + }; /include/ "k2e-netcp.dtsi" }; }; - -&mdio { - reg = <0x24200f00 0x100>; -}; diff --git a/arch/arm/boot/dts/k2hk-clocks.dtsi b/arch/arm/boot/dts/k2hk-clocks.dtsi index d5adee3c0067..af9b7190533a 100644 --- a/arch/arm/boot/dts/k2hk-clocks.dtsi +++ b/arch/arm/boot/dts/k2hk-clocks.dtsi @@ -22,9 +22,8 @@ clocks { #clock-cells = <0>; compatible = "ti,keystone,main-pll-clock"; clocks = <&refclksys>; - reg = <0x02620350 4>, <0x02310110 4>; - reg-names = "control", "multiplier"; - fixed-postdiv = <2>; + reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>; + reg-names = "control", "multiplier", "post-divider"; }; papllclk: papllclk@2620358 { diff --git a/arch/arm/boot/dts/k2hk.dtsi b/arch/arm/boot/dts/k2hk.dtsi index ae6472407b22..d0810a5f2968 100644 --- a/arch/arm/boot/dts/k2hk.dtsi +++ b/arch/arm/boot/dts/k2hk.dtsi @@ -98,6 +98,17 @@ #gpio-cells = <2>; gpio,syscon-dev = <&devctrl 0x25c>; }; + + mdio: mdio@02090300 { + compatible = "ti,keystone_mdio", "ti,davinci_mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x02090300 0x100>; + status = "disabled"; + clocks = <&clkcpgmac>; + clock-names = "fck"; + bus_freq = <2500000>; + }; /include/ "k2hk-netcp.dtsi" }; }; diff --git a/arch/arm/boot/dts/k2l-clocks.dtsi b/arch/arm/boot/dts/k2l-clocks.dtsi index eb1e3e29f073..ef8464bb11ff 100644 --- a/arch/arm/boot/dts/k2l-clocks.dtsi +++ b/arch/arm/boot/dts/k2l-clocks.dtsi @@ -22,9 +22,8 @@ clocks { #clock-cells = <0>; compatible = "ti,keystone,main-pll-clock"; clocks = <&refclksys>; - reg = <0x02620350 4>, <0x02310110 4>; - reg-names = "control", "multiplier"; - fixed-postdiv = <2>; + reg = <0x02620350 4>, <0x02310110 4>, <0x02310108 4>; + reg-names = "control", "multiplier", "post-divider"; }; papllclk: papllclk@2620358 { diff --git a/arch/arm/boot/dts/k2l.dtsi b/arch/arm/boot/dts/k2l.dtsi index 0e007483615e..49fd414f680c 100644 --- a/arch/arm/boot/dts/k2l.dtsi +++ b/arch/arm/boot/dts/k2l.dtsi @@ -29,7 +29,6 @@ }; soc { - /include/ "k2l-clocks.dtsi" uart2: serial@02348400 { @@ -79,6 +78,17 @@ #gpio-cells = <2>; gpio,syscon-dev = <&devctrl 0x24c>; }; + + mdio: mdio@26200f00 { + compatible = "ti,keystone_mdio", "ti,davinci_mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x26200f00 0x100>; + status = "disabled"; + clocks = <&clkcpgmac>; + clock-names = "fck"; + bus_freq = <2500000>; + }; /include/ "k2l-netcp.dtsi" }; }; @@ -96,7 +106,3 @@ /* Pin muxed. Enabled and configured by Bootloader */ status = "disabled"; }; - -&mdio { - reg = <0x26200f00 0x100>; -}; diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index c06542b2c954..72816d65f7ec 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -267,17 +267,6 @@ 1 0 0x21000A00 0x00000100>; }; - mdio: mdio@02090300 { - compatible = "ti,keystone_mdio", "ti,davinci_mdio"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x02090300 0x100>; - status = "disabled"; - clocks = <&clkpa>; - clock-names = "fck"; - bus_freq = <2500000>; - }; - kirq0: keystone_irq@26202a0 { compatible = "ti,keystone-irq"; interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>; @@ -286,7 +275,7 @@ ti,syscon-dev = <&devctrl 0x2a0>; }; - pcie@21800000 { + pcie0: pcie@21800000 { compatible = "ti,keystone-pcie", "snps,dw-pcie"; clocks = <&clkpcie>; clock-names = "pcie"; @@ -296,6 +285,7 @@ ranges = <0x81000000 0 0 0x23250000 0 0x4000 0x82000000 0 0x50000000 0x50000000 0 0x10000000>; + status = "disabled"; device_type = "pci"; num-lanes = <2>; diff --git a/arch/arm/boot/dts/kirkwood-d2net.dts b/arch/arm/boot/dts/kirkwood-d2net.dts index 6b7856025001..e1c25c35e9ce 100644 --- a/arch/arm/boot/dts/kirkwood-d2net.dts +++ b/arch/arm/boot/dts/kirkwood-d2net.dts @@ -10,6 +10,7 @@ /dts-v1/; +#include <dt-bindings/leds/leds-ns2.h> #include "kirkwood-netxbig.dtsi" / { @@ -28,6 +29,10 @@ label = "d2net_v2:blue:sata"; slow-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; cmd-gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>; + modes-map = <NS_V2_LED_OFF 1 0 + NS_V2_LED_ON 0 1 + NS_V2_LED_ON 1 1 + NS_V2_LED_SATA 0 0>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-is2.dts b/arch/arm/boot/dts/kirkwood-is2.dts index da674bbd49a8..4121674abd1c 100644 --- a/arch/arm/boot/dts/kirkwood-is2.dts +++ b/arch/arm/boot/dts/kirkwood-is2.dts @@ -1,5 +1,6 @@ /dts-v1/; +#include <dt-bindings/leds/leds-ns2.h> #include "kirkwood-ns2-common.dtsi" / { @@ -27,6 +28,10 @@ label = "ns2:blue:sata"; slow-gpio = <&gpio0 29 0>; cmd-gpio = <&gpio0 30 0>; + modes-map = <NS_V2_LED_OFF 1 0 + NS_V2_LED_ON 0 1 + NS_V2_LED_ON 1 1 + NS_V2_LED_SATA 0 0>; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-ns2.dts b/arch/arm/boot/dts/kirkwood-ns2.dts index 53368d1022cc..190189d235e6 100644 --- a/arch/arm/boot/dts/kirkwood-ns2.dts +++ b/arch/arm/boot/dts/kirkwood-ns2.dts @@ -1,5 +1,6 @@ /dts-v1/; +#include <dt-bindings/leds/leds-ns2.h> #include "kirkwood-ns2-common.dtsi" / { @@ -27,6 +28,10 @@ label = "ns2:blue:sata"; slow-gpio = <&gpio0 29 0>; cmd-gpio = <&gpio0 30 0>; + modes-map = <NS_V2_LED_OFF 1 0 + NS_V2_LED_ON 0 1 + NS_V2_LED_ON 1 1 + NS_V2_LED_SATA 0 0>; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/kirkwood-ns2max.dts index 72c78d0b1116..55cc41d9c80c 100644 --- a/arch/arm/boot/dts/kirkwood-ns2max.dts +++ b/arch/arm/boot/dts/kirkwood-ns2max.dts @@ -1,5 +1,6 @@ /dts-v1/; +#include <dt-bindings/leds/leds-ns2.h> #include "kirkwood-ns2-common.dtsi" / { @@ -46,6 +47,10 @@ label = "ns2:blue:sata"; slow-gpio = <&gpio0 29 0>; cmd-gpio = <&gpio0 30 0>; + modes-map = <NS_V2_LED_OFF 1 0 + NS_V2_LED_ON 0 1 + NS_V2_LED_ON 1 1 + NS_V2_LED_SATA 0 0>; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts index c441bf62c09f..9935f3ec29b4 100644 --- a/arch/arm/boot/dts/kirkwood-ns2mini.dts +++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts @@ -1,5 +1,6 @@ /dts-v1/; +#include <dt-bindings/leds/leds-ns2.h> #include "kirkwood-ns2-common.dtsi" / { @@ -47,6 +48,10 @@ label = "ns2:blue:sata"; slow-gpio = <&gpio0 29 0>; cmd-gpio = <&gpio0 30 0>; + modes-map = <NS_V2_LED_OFF 1 0 + NS_V2_LED_ON 0 1 + NS_V2_LED_ON 1 1 + NS_V2_LED_SATA 0 0>; }; }; }; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index 11a7963be003..2390f387c271 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -51,7 +51,8 @@ }; scm_conf: scm_conf@270 { - compatible = "syscon"; + compatible = "syscon", + "simple-bus"; reg = <0x270 0x240>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi index 233c69e50ae3..df8908adb0cb 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi @@ -120,7 +120,7 @@ lcd0: display@0 { compatible = "lgphilips,lb035q02"; - label = "lcd"; + label = "lcd35"; reg = <1>; /* CS1 */ spi-max-frequency = <10000000>; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi index f5395b7da912..048fd216970a 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi @@ -98,7 +98,7 @@ lcd0: display@0 { compatible = "samsung,lte430wq-f0c", "panel-dpi"; - label = "lcd"; + label = "lcd43"; pinctrl-names = "default"; pinctrl-0 = <<e430_pins>; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index f884d6adb71e..abc4473e6f8a 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -191,7 +191,8 @@ }; omap4_padconf_global: omap4_padconf_global@5a0 { - compatible = "syscon"; + compatible = "syscon", + "simple-bus"; reg = <0x5a0 0x170>; #address-cells = <1>; #size-cells = <1>; @@ -551,6 +552,7 @@ reg = <0x4a066000 0x100>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmu_dsp"; + #iommu-cells = <0>; }; mmu_ipu: mmu@55082000 { @@ -558,6 +560,7 @@ reg = <0x55082000 0x100>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmu_ipu"; + #iommu-cells = <0>; ti,iommu-bus-err-back; }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 7d24ae0306b5..b1a1263e6001 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -180,7 +180,8 @@ }; omap5_padconf_global: omap5_padconf_global@5a0 { - compatible = "syscon"; + compatible = "syscon", + "simple-bus"; reg = <0x5a0 0xec>; #address-cells = <1>; #size-cells = <1>; @@ -612,6 +613,7 @@ reg = <0x4a066000 0x100>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmu_dsp"; + #iommu-cells = <0>; }; mmu_ipu: mmu@55082000 { @@ -619,6 +621,7 @@ reg = <0x55082000 0x100>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmu_ipu"; + #iommu-cells = <0>; ti,iommu-bus-err-back; }; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts index bd35b0674ff6..9bc72a3356e4 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts @@ -17,3 +17,13 @@ status = "ok"; }; }; + +&spmi_bus { + pm8941@0 { + coincell@2800 { + status = "ok"; + qcom,rset-ohms = <2100>; + qcom,vset-millivolts = <3000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index aa774e685018..968f1043d4f5 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -125,6 +125,12 @@ interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>; qcom,external-resistor-micro-ohms = <10000>; }; + + coincell@2800 { + compatible = "qcom,pm8941-coincell"; + reg = <0x2800>; + status = "disabled"; + }; }; usid1: pm8941@1 { diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts index 71468a7eb28f..5e17fd147728 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts @@ -60,27 +60,27 @@ rxc-skew-ps = <2000>; }; -&mmc0 { - vmmc-supply = <®ulator_3_3v>; - vqmmc-supply = <®ulator_3_3v>; -}; - -&usb1 { - status = "okay"; -}; - &gpio2 { status = "okay"; }; -&i2c1{ +&i2c1 { status = "okay"; - accel1: accel1@53{ - compatible = "adxl34x"; + accel1: accelerometer@53 { + compatible = "adi,adxl345"; reg = <0x53>; - interrupt-parent = < &portc >; + interrupt-parent = <&portc>; interrupts = <3 2>; }; }; + +&mmc0 { + vmmc-supply = <®ulator_3_3v>; + vqmmc-supply = <®ulator_3_3v>; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index d42c84b1df8d..e48857249ce7 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr1310 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi index 9d342920695a..54bc6d3cf290 100644 --- a/arch/arm/boot/dts/spear1310.dtsi +++ b/arch/arm/boot/dts/spear1310.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr1310 SoCs * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index b23e05ed1d60..c611f5606dfe 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr1340 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index 13e1aa33daa2..df2232d767ed 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr1340 SoCs * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index 40accc87e3a2..14594ce8c18a 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr13xx SoCs * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts index 5de1431653e4..e859e8288bcd 100644 --- a/arch/arm/boot/dts/spear300-evb.dts +++ b/arch/arm/boot/dts/spear300-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr300 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi index f79b3dfaabe6..f4e92e599729 100644 --- a/arch/arm/boot/dts/spear300.dtsi +++ b/arch/arm/boot/dts/spear300.dtsi @@ -1,7 +1,7 @@ /* * DTS file for SPEAr300 SoC * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts index b09632963d15..070f2c1b7851 100644 --- a/arch/arm/boot/dts/spear310-evb.dts +++ b/arch/arm/boot/dts/spear310-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr310 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi index 95372080eea6..da210b454753 100644 --- a/arch/arm/boot/dts/spear310.dtsi +++ b/arch/arm/boot/dts/spear310.dtsi @@ -1,7 +1,7 @@ /* * DTS file for SPEAr310 SoC * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts index fdedbb514102..1b1034477923 100644 --- a/arch/arm/boot/dts/spear320-evb.dts +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr320 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi index ffea342aeec9..22be6e5edaac 100644 --- a/arch/arm/boot/dts/spear320.dtsi +++ b/arch/arm/boot/dts/spear320.dtsi @@ -1,7 +1,7 @@ /* * DTS file for SPEAr320 SoC * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi index f0e3fcf8e323..118135d75899 100644 --- a/arch/arm/boot/dts/spear3xx.dtsi +++ b/arch/arm/boot/dts/spear3xx.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr3xx SoCs * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/ste-ccu8540.dts b/arch/arm/boot/dts/ste-ccu8540.dts index 32dd55e5f4e6..6eaaf638e52e 100644 --- a/arch/arm/boot/dts/ste-ccu8540.dts +++ b/arch/arm/boot/dts/ste-ccu8540.dts @@ -17,6 +17,13 @@ model = "ST-Ericsson U8540 platform with Device Tree"; compatible = "st-ericsson,ccu8540", "st-ericsson,u8540"; + /* This stablilizes the serial port enumeration */ + aliases { + serial0 = &ux500_serial0; + serial1 = &ux500_serial1; + serial2 = &ux500_serial2; + }; + memory@0 { device_type = "memory"; reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>; diff --git a/arch/arm/boot/dts/ste-ccu9540.dts b/arch/arm/boot/dts/ste-ccu9540.dts index 651c56d400a4..c8b815819cfe 100644 --- a/arch/arm/boot/dts/ste-ccu9540.dts +++ b/arch/arm/boot/dts/ste-ccu9540.dts @@ -16,6 +16,13 @@ model = "ST-Ericsson CCU9540 platform with Device Tree"; compatible = "st-ericsson,ccu9540", "st-ericsson,u9540"; + /* This stablilizes the serial port enumeration */ + aliases { + serial0 = &ux500_serial0; + serial1 = &ux500_serial1; + serial2 = &ux500_serial2; + }; + memory { reg = <0x00000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index 853684ad7773..c5fbde3afcf6 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -15,6 +15,33 @@ #include "skeleton.dtsi" / { + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "ste,dbx500-smp"; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + core1 { + cpu = <&CPU1>; + }; + }; + }; + CPU0: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x300>; + }; + CPU1: cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x301>; + }; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -22,32 +49,6 @@ interrupt-parent = <&intc>; ranges; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu-map { - cluster0 { - core0 { - cpu = <&CPU0>; - }; - core1 { - cpu = <&CPU1>; - }; - }; - }; - CPU0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <0>; - }; - CPU1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <1>; - }; - }; - ptm@801ae000 { compatible = "arm,coresight-etm3x", "arm,primecell"; reg = <0x801ae000 0x1000>; @@ -219,6 +220,13 @@ clocks { compatible = "stericsson,u8500-clks"; + /* + * Registers for the CLKRST block on peripheral + * groups 1, 2, 3, 5, 6, + */ + reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>, + <0x8000f000 0x1000>, <0xa03ff000 0x1000>, + <0xa03cf000 0x1000>; prcmu_clk: prcmu-clock { #clock-cells = <1>; @@ -971,7 +979,7 @@ power-domains = <&pm_domains DOMAIN_VAPE>; }; - uart@80120000 { + ux500_serial0: uart@80120000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x80120000 0x1000>; interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; @@ -986,7 +994,7 @@ status = "disabled"; }; - uart@80121000 { + ux500_serial1: uart@80121000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x80121000 0x1000>; interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; @@ -1001,7 +1009,7 @@ status = "disabled"; }; - uart@80007000 { + ux500_serial2: uart@80007000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x80007000 0x1000>; interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 744c1e3a744d..6d8ce154347e 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -32,11 +32,11 @@ status = "okay"; }; + /* This UART is unused and thus left disabled */ uart@80121000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart1_default_mode>; pinctrl-1 = <&uart1_sleep_mode>; - status = "okay"; }; uart@80007000 { diff --git a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts index 2b1cb5b584b6..18e9795a94f9 100644 --- a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts +++ b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts @@ -17,6 +17,13 @@ model = "ST-Ericsson HREF (pre-v60) and ST UIB"; compatible = "st-ericsson,mop500", "st-ericsson,u8500"; + /* This stablilizes the serial port enumeration */ + aliases { + serial0 = &ux500_serial0; + serial1 = &ux500_serial1; + serial2 = &ux500_serial2; + }; + soc { /* Reset line for the BU21013 touchscreen */ i2c@80110000 { diff --git a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts index 59523f866812..24739914e689 100644 --- a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts +++ b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts @@ -16,4 +16,11 @@ / { model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB"; compatible = "st-ericsson,mop500", "st-ericsson,u8500"; + + /* This stablilizes the serial port enumeration */ + aliases { + serial0 = &ux500_serial0; + serial1 = &ux500_serial1; + serial2 = &ux500_serial2; + }; }; diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi index 7f3975b58d16..b0278f4c486c 100644 --- a/arch/arm/boot/dts/ste-hrefprev60.dtsi +++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi @@ -23,6 +23,11 @@ }; soc { + /* Enable UART1 on this board */ + uart@80121000 { + status = "okay"; + }; + i2c@80004000 { tps61052@33 { compatible = "tps61052"; diff --git a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts index 8c6a2de56cf1..c2e1ba019a2f 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts +++ b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts @@ -19,6 +19,13 @@ model = "ST-Ericsson HREF (v60+) and ST UIB"; compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; + /* This stablilizes the serial port enumeration */ + aliases { + serial0 = &ux500_serial0; + serial1 = &ux500_serial1; + serial2 = &ux500_serial2; + }; + soc { /* Reset line for the BU21013 touchscreen */ i2c@80110000 { diff --git a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts index d53cccdce776..ebd8547e98f1 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts +++ b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts @@ -18,4 +18,11 @@ / { model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB"; compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; + + /* This stablilizes the serial port enumeration */ + aliases { + serial0 = &ux500_serial0; + serial1 = &ux500_serial1; + serial2 = &ux500_serial2; + }; }; diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi index a4bc9e77d640..810cda743b6d 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi +++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi @@ -43,15 +43,26 @@ <&vaudio_hf_hrefv60_mode>, <&gbf_hrefv60_mode>, <&hdtv_hrefv60_mode>, - <&touch_hrefv60_mode>; + <&touch_hrefv60_mode>, + <&gpios_hrefv60_mode>; sdi0 { - /* SD card detect GPIO pin, extend default state */ sdi0_default_mode: sdi0_default { + /* SD card detect GPIO pin, extend default state */ default_hrefv60_cfg1 { pins = "GPIO95_E8"; ste,config = <&gpio_in_pu>; }; + /* VMMCI level-shifter enable */ + default_hrefv60_cfg2 { + pins = "GPIO169_D22"; + ste,config = <&gpio_out_lo>; + }; + /* VMMCI level-shifter voltage select */ + default_hrefv60_cfg3 { + pins = "GPIO5_AG6"; + ste,config = <&gpio_out_hi>; + }; }; }; ipgpio { @@ -213,6 +224,16 @@ }; }; }; + gpios { + /* Dangling GPIO pins */ + gpios_hrefv60_mode: gpios_hrefv60 { + default_cfg1 { + /* Normally UART1 RXD, now dangling */ + pins = "GPIO4_AH6"; + ste,config = <&in_pu>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts index 3d0b8755caee..3d25dba143a5 100644 --- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts +++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts @@ -17,6 +17,7 @@ }; aliases { + serial1 = &uart1; stmpe-i2c0 = &stmpe0; stmpe-i2c1 = &stmpe1; }; diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts index 85d3b95dfdba..3c140d05f796 100644 --- a/arch/arm/boot/dts/ste-nomadik-s8815.dts +++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts @@ -15,6 +15,10 @@ bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk"; }; + aliases { + serial1 = &uart1; + }; + src@101e0000 { /* These chrystal drivers are not used on this board */ disable-sxtalo; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index 9a5f2ba139b7..ef794a33b4dc 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -757,6 +757,7 @@ clock-names = "uartclk", "apb_pclk"; pinctrl-names = "default"; pinctrl-0 = <&uart0_default_mux>; + status = "disabled"; }; uart1: uart@101fb000 { diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 9edadc37719f..32a5ccb14e7e 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -18,6 +18,13 @@ model = "Calao Systems Snowball platform with device tree"; compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500"; + /* This stablilizes the serial port enumeration */ + aliases { + serial0 = &ux500_serial0; + serial1 = &ux500_serial1; + serial2 = &ux500_serial2; + }; + memory { reg = <0x00000000 0x20000000>; }; @@ -223,11 +230,11 @@ status = "okay"; }; + /* This UART is unused and thus left disabled */ uart@80121000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart1_default_mode>; pinctrl-1 = <&uart1_sleep_mode>; - status = "okay"; }; uart@80007000 { @@ -452,7 +459,21 @@ pins = "GPIO21_AB3"; /* DAT31DIR */ ste,config = <&out_hi>; }; - + /* SD card detect GPIO pin, extend default state */ + snowball_cfg2 { + pins = "GPIO218_AH11"; + ste,config = <&gpio_in_pu>; + }; + /* VMMCI level-shifter enable */ + snowball_cfg3 { + pins = "GPIO217_AH12"; + ste,config = <&gpio_out_lo>; + }; + /* VMMCI level-shifter voltage select */ + snowball_cfg4 { + pins = "GPIO228_AJ6"; + ste,config = <&gpio_out_hi>; + }; }; }; ssp0 { diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 61c03d1fe530..adaa57b7a943 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -241,6 +241,7 @@ compatible = "allwinner,sun4i-a10-axi-gates-clk"; reg = <0x01c2005c 0x4>; clocks = <&axi>; + clock-indices = <0>; clock-output-names = "axi_dram"; }; @@ -257,17 +258,36 @@ compatible = "allwinner,sun4i-a10-ahb-gates-clk"; reg = <0x01c20060 0x8>; clocks = <&ahb>; + clock-indices = <0>, <1>, + <2>, <3>, + <4>, <5>, <6>, + <7>, <8>, <9>, + <10>, <11>, <12>, + <13>, <14>, <16>, + <17>, <18>, <20>, + <21>, <22>, <23>, + <24>, <25>, <26>, + <32>, <33>, <34>, + <35>, <36>, <37>, + <40>, <41>, <43>, + <44>, <45>, + <46>, <47>, + <50>, <52>; clock-output-names = "ahb_usb0", "ahb_ehci0", - "ahb_ohci0", "ahb_ehci1", "ahb_ohci1", "ahb_ss", - "ahb_dma", "ahb_bist", "ahb_mmc0", "ahb_mmc1", - "ahb_mmc2", "ahb_mmc3", "ahb_ms", "ahb_nand", - "ahb_sdram", "ahb_ace", "ahb_emac", "ahb_ts", - "ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_spi3", - "ahb_pata", "ahb_sata", "ahb_gps", "ahb_ve", - "ahb_tvd", "ahb_tve0", "ahb_tve1", "ahb_lcd0", - "ahb_lcd1", "ahb_csi0", "ahb_csi1", "ahb_hdmi", - "ahb_de_be0", "ahb_de_be1", "ahb_de_fe0", - "ahb_de_fe1", "ahb_mp", "ahb_mali400"; + "ahb_ohci0", "ahb_ehci1", + "ahb_ohci1", "ahb_ss", "ahb_dma", + "ahb_bist", "ahb_mmc0", "ahb_mmc1", + "ahb_mmc2", "ahb_mmc3", "ahb_ms", + "ahb_nand", "ahb_sdram", "ahb_ace", + "ahb_emac", "ahb_ts", "ahb_spi0", + "ahb_spi1", "ahb_spi2", "ahb_spi3", + "ahb_pata", "ahb_sata", "ahb_gps", + "ahb_ve", "ahb_tvd", "ahb_tve0", + "ahb_tve1", "ahb_lcd0", "ahb_lcd1", + "ahb_csi0", "ahb_csi1", "ahb_hdmi", + "ahb_de_be0", "ahb_de_be1", + "ahb_de_fe0", "ahb_de_fe1", + "ahb_mp", "ahb_mali400"; }; apb0: apb0@01c20054 { @@ -283,9 +303,14 @@ compatible = "allwinner,sun4i-a10-apb0-gates-clk"; reg = <0x01c20068 0x4>; clocks = <&apb0>; + clock-indices = <0>, <1>, + <2>, <3>, + <5>, <6>, + <7>, <10>; clock-output-names = "apb0_codec", "apb0_spdif", - "apb0_ac97", "apb0_iis", "apb0_pio", "apb0_ir0", - "apb0_ir1", "apb0_keypad"; + "apb0_ac97", "apb0_iis", + "apb0_pio", "apb0_ir0", + "apb0_ir1", "apb0_keypad"; }; apb1: clk@01c20058 { @@ -301,12 +326,22 @@ compatible = "allwinner,sun4i-a10-apb1-gates-clk"; reg = <0x01c2006c 0x4>; clocks = <&apb1>; + clock-indices = <0>, <1>, + <2>, <4>, + <5>, <6>, + <7>, <16>, + <17>, <18>, + <19>, <20>, + <21>, <22>, + <23>; clock-output-names = "apb1_i2c0", "apb1_i2c1", - "apb1_i2c2", "apb1_can", "apb1_scr", - "apb1_ps20", "apb1_ps21", "apb1_uart0", - "apb1_uart1", "apb1_uart2", "apb1_uart3", - "apb1_uart4", "apb1_uart5", "apb1_uart6", - "apb1_uart7"; + "apb1_i2c2", "apb1_can", + "apb1_scr", "apb1_ps20", + "apb1_ps21", "apb1_uart0", + "apb1_uart1", "apb1_uart2", + "apb1_uart3", "apb1_uart4", + "apb1_uart5", "apb1_uart6", + "apb1_uart7"; }; nand_clk: clk@01c20080 { @@ -643,6 +678,14 @@ status = "disabled"; }; + crypto: crypto-engine@01c15000 { + compatible = "allwinner,sun4i-a10-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <86>; + clocks = <&ahb_gates 5>, <&ss_clk>; + clock-names = "ahb", "mod"; + }; + spi2: spi@01c17000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c17000 0x1000>; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index f11efb722bbb..a513b416a807 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -85,6 +85,17 @@ compatible = "allwinner,sun5i-a10s-ahb-gates-clk"; reg = <0x01c20060 0x8>; clocks = <&ahb>; + clock-indices = <0>, <1>, + <2>, <5>, <6>, + <7>, <8>, <9>, + <10>, <13>, + <14>, <17>, <18>, + <20>, <21>, <22>, + <26>, <28>, <32>, + <34>, <36>, <40>, + <43>, <44>, + <46>, <51>, + <52>; clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci", "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0", "ahb_mmc1", @@ -103,6 +114,9 @@ compatible = "allwinner,sun5i-a10s-apb0-gates-clk"; reg = <0x01c20068 0x4>; clocks = <&apb0>; + clock-indices = <0>, <3>, + <5>, <6>, + <10>; clock-output-names = "apb0_codec", "apb0_iis", "apb0_pio", "apb0_ir", "apb0_keypad"; @@ -113,9 +127,14 @@ compatible = "allwinner,sun5i-a10s-apb1-gates-clk"; reg = <0x01c2006c 0x4>; clocks = <&apb1>; + clock-indices = <0>, <1>, + <2>, <16>, + <17>, <18>, + <19>; clock-output-names = "apb1_i2c0", "apb1_i2c1", - "apb1_i2c2", "apb1_uart0", "apb1_uart1", - "apb1_uart2", "apb1_uart3"; + "apb1_i2c2", "apb1_uart0", + "apb1_uart1", "apb1_uart2", + "apb1_uart3"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index 976d4faa2179..f3631c9c6fa2 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -104,6 +104,16 @@ compatible = "allwinner,sun5i-a13-ahb-gates-clk"; reg = <0x01c20060 0x8>; clocks = <&ahb>; + clock-indices = <0>, <1>, + <2>, <5>, <6>, + <7>, <8>, <9>, + <10>, <13>, + <14>, <20>, + <21>, <22>, + <28>, <32>, <36>, + <40>, <44>, + <46>, <51>, + <52>; clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci", "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0", "ahb_mmc1", @@ -121,6 +131,8 @@ compatible = "allwinner,sun5i-a13-apb0-gates-clk"; reg = <0x01c20068 0x4>; clocks = <&apb0>; + clock-indices = <0>, <5>, + <6>; clock-output-names = "apb0_codec", "apb0_pio", "apb0_ir"; }; @@ -130,8 +142,12 @@ compatible = "allwinner,sun5i-a13-apb1-gates-clk"; reg = <0x01c2006c 0x4>; clocks = <&apb1>; + clock-indices = <0>, <1>, + <2>, <17>, + <19>; clock-output-names = "apb1_i2c0", "apb1_i2c1", - "apb1_i2c2", "apb1_uart1", "apb1_uart3"; + "apb1_i2c2", "apb1_uart1", + "apb1_uart3"; }; }; }; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 54b097830434..427c0e7289fa 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -178,6 +178,7 @@ compatible = "allwinner,sun4i-a10-axi-gates-clk"; reg = <0x01c2005c 0x4>; clocks = <&axi>; + clock-indices = <0>; clock-output-names = "axi_dram"; }; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 008047a018cf..e4d3484d97bd 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -252,6 +252,20 @@ compatible = "allwinner,sun6i-a31-ahb1-gates-clk"; reg = <0x01c20060 0x8>; clocks = <&ahb1>; + clock-indices = <1>, <5>, + <6>, <8>, <9>, + <10>, <11>, <12>, + <13>, <14>, + <17>, <18>, <19>, + <20>, <21>, <22>, + <23>, <24>, <26>, + <27>, <29>, + <30>, <31>, <32>, + <36>, <37>, <40>, + <43>, <44>, <45>, + <46>, <47>, <50>, + <52>, <55>, <56>, + <57>, <58>; clock-output-names = "ahb1_mipidsi", "ahb1_ss", "ahb1_dma", "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2", "ahb1_mmc3", "ahb1_nand1", @@ -281,6 +295,9 @@ compatible = "allwinner,sun6i-a31-apb1-gates-clk"; reg = <0x01c20068 0x4>; clocks = <&apb1>; + clock-indices = <0>, <4>, + <5>, <12>, + <13>; clock-output-names = "apb1_codec", "apb1_digital_mic", "apb1_pio", "apb1_daudio0", "apb1_daudio1"; @@ -299,6 +316,10 @@ compatible = "allwinner,sun6i-a31-apb2-gates-clk"; reg = <0x01c2006c 0x4>; clocks = <&apb2>; + clock-indices = <0>, <1>, + <2>, <3>, <16>, + <17>, <18>, <19>, + <20>, <21>; clock-output-names = "apb2_i2c0", "apb2_i2c1", "apb2_i2c2", "apb2_i2c3", "apb2_uart0", "apb2_uart1", @@ -346,6 +367,14 @@ "mmc3_sample"; }; + ss_clk: clk@01c2009c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c2009c 0x4>; + clocks = <&osc24M>, <&pll6 0>; + clock-output-names = "ss"; + }; + spi0_clk: clk@01c200a0 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; @@ -384,6 +413,9 @@ compatible = "allwinner,sun6i-a31-usb-clk"; reg = <0x01c200cc 0x4>; clocks = <&osc24M>; + clock-indices = <8>, <9>, <10>, + <16>, <17>, + <18>; clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2", "usb_ohci0", "usb_ohci1", "usb_ohci2"; @@ -870,6 +902,16 @@ #size-cells = <0>; }; + crypto: crypto-engine@01c15000 { + compatible = "allwinner,sun4i-a10-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ahb1_gates 5>, <&ss_clk>; + clock-names = "ahb", "mod"; + resets = <&ahb1_rst 5>; + reset-names = "ahb"; + }; + timer@01c60000 { compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer"; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 6a63f30c9a69..d3b2f26417aa 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -267,6 +267,19 @@ compatible = "allwinner,sun7i-a20-ahb-gates-clk"; reg = <0x01c20060 0x8>; clocks = <&ahb>; + clock-indices = <0>, <1>, + <2>, <3>, <4>, + <5>, <6>, <7>, <8>, + <9>, <10>, <11>, <12>, + <13>, <14>, <16>, + <17>, <18>, <20>, <21>, + <22>, <23>, <25>, + <28>, <32>, <33>, <34>, + <35>, <36>, <37>, <40>, + <41>, <42>, <43>, + <44>, <45>, <46>, + <47>, <49>, <50>, + <52>; clock-output-names = "ahb_usb0", "ahb_ehci0", "ahb_ohci0", "ahb_ehci1", "ahb_ohci1", "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0", @@ -295,6 +308,10 @@ compatible = "allwinner,sun7i-a20-apb0-gates-clk"; reg = <0x01c20068 0x4>; clocks = <&apb0>; + clock-indices = <0>, <1>, + <2>, <3>, <4>, + <5>, <6>, <7>, + <8>, <10>; clock-output-names = "apb0_codec", "apb0_spdif", "apb0_ac97", "apb0_iis0", "apb0_iis1", "apb0_pio", "apb0_ir0", "apb0_ir1", @@ -314,6 +331,12 @@ compatible = "allwinner,sun7i-a20-apb1-gates-clk"; reg = <0x01c2006c 0x4>; clocks = <&apb1>; + clock-indices = <0>, <1>, + <2>, <3>, <4>, + <5>, <6>, <7>, + <15>, <16>, <17>, + <18>, <19>, <20>, + <21>, <22>, <23>; clock-output-names = "apb1_i2c0", "apb1_i2c1", "apb1_i2c2", "apb1_i2c3", "apb1_can", "apb1_scr", "apb1_ps20", "apb1_ps21", @@ -731,6 +754,14 @@ status = "disabled"; }; + crypto: crypto-engine@01c15000 { + compatible = "allwinner,sun4i-a10-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ahb_gates 5>, <&ss_clk>; + clock-names = "ahb", "mod"; + }; + spi2: spi@01c17000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c17000 0x1000>; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 7abd0ae3143d..c318c770b6c1 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -180,6 +180,15 @@ compatible = "allwinner,sun8i-a23-ahb1-gates-clk"; reg = <0x01c20060 0x8>; clocks = <&ahb1>; + clock-indices = <1>, <6>, + <8>, <9>, <10>, + <13>, <14>, + <19>, <20>, + <21>, <24>, <26>, + <29>, <32>, <36>, + <40>, <44>, <46>, + <52>, <54>, + <57>; clock-output-names = "ahb1_mipidsi", "ahb1_dma", "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2", "ahb1_nand", "ahb1_sdram", @@ -196,6 +205,8 @@ compatible = "allwinner,sun8i-a23-apb1-gates-clk"; reg = <0x01c20068 0x4>; clocks = <&apb1>; + clock-indices = <0>, <5>, + <12>, <13>; clock-output-names = "apb1_codec", "apb1_pio", "apb1_daudio0", "apb1_daudio1"; }; @@ -213,6 +224,10 @@ compatible = "allwinner,sun8i-a23-apb2-gates-clk"; reg = <0x01c2006c 0x4>; clocks = <&apb2>; + clock-indices = <0>, <1>, + <2>, <16>, + <17>, <18>, + <19>, <20>; clock-output-names = "apb2_i2c0", "apb2_i2c1", "apb2_i2c2", "apb2_uart0", "apb2_uart1", "apb2_uart2", diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index a43ad779ee2f..5908e3dcf965 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -277,9 +277,12 @@ compatible = "allwinner,sun9i-a80-ahb0-gates-clk"; reg = <0x06000580 0x4>; clocks = <&ahb0>; - clock-indices = <0>, <1>, <3>, <5>, <8>, <12>, <13>, - <14>, <15>, <16>, <18>, <20>, <21>, - <22>, <23>; + clock-indices = <0>, <1>, <3>, + <5>, <8>, <12>, + <13>, <14>, + <15>, <16>, <18>, + <20>, <21>, <22>, + <23>; clock-output-names = "ahb0_fd", "ahb0_ve", "ahb0_gpu", "ahb0_ss", "ahb0_sd", "ahb0_nand1", "ahb0_nand0", "ahb0_sdram", @@ -293,7 +296,10 @@ compatible = "allwinner,sun9i-a80-ahb1-gates-clk"; reg = <0x06000584 0x4>; clocks = <&ahb1>; - clock-indices = <0>, <1>, <17>, <21>, <22>, <23>, <24>; + clock-indices = <0>, <1>, + <17>, <21>, + <22>, <23>, + <24>; clock-output-names = "ahb1_usbotg", "ahb1_usbhci", "ahb1_gmac", "ahb1_msgbox", "ahb1_spinlock", "ahb1_hstimer", @@ -305,8 +311,9 @@ compatible = "allwinner,sun9i-a80-ahb2-gates-clk"; reg = <0x06000588 0x4>; clocks = <&ahb2>; - clock-indices = <0>, <1>, <2>, <4>, <5>, <7>, <8>, - <11>; + clock-indices = <0>, <1>, + <2>, <4>, <5>, + <7>, <8>, <11>; clock-output-names = "ahb2_lcd0", "ahb2_lcd1", "ahb2_edp", "ahb2_csi", "ahb2_hdmi", "ahb2_de", "ahb2_mp", "ahb2_mipi_dsi"; @@ -317,8 +324,10 @@ compatible = "allwinner,sun9i-a80-apb0-gates-clk"; reg = <0x06000590 0x4>; clocks = <&apb0>; - clock-indices = <1>, <5>, <11>, <12>, <13>, <15>, - <17>, <18>, <19>; + clock-indices = <1>, <5>, + <11>, <12>, <13>, + <15>, <17>, <18>, + <19>; clock-output-names = "apb0_spdif", "apb0_pio", "apb0_ac97", "apb0_i2s0", "apb0_i2s1", "apb0_lradc", "apb0_gpadc", "apb0_twd", @@ -330,8 +339,11 @@ compatible = "allwinner,sun9i-a80-apb1-gates-clk"; reg = <0x06000594 0x4>; clocks = <&apb1>; - clock-indices = <0>, <1>, <2>, <3>, <4>, - <16>, <17>, <18>, <19>, <20>, <21>; + clock-indices = <0>, <1>, + <2>, <3>, <4>, + <16>, <17>, + <18>, <19>, + <20>, <21>; clock-output-names = "apb1_i2c0", "apb1_i2c1", "apb1_i2c2", "apb1_i2c3", "apb1_i2c4", "apb1_uart0", "apb1_uart1", diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index b47863d49ac6..7569b391704e 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -354,8 +354,7 @@ CONFIG_PROVE_LOCKING=y # CONFIG_FTRACE is not set # CONFIG_ARM_UNWIND is not set CONFIG_SECURITYFS=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set +CONFIG_CRYPTO_DEV_FSL_CAAM=y CONFIG_CRC_CCITT=m CONFIG_CRC_T10DIF=y CONFIG_CRC7=m diff --git a/arch/arm/crypto/.gitignore b/arch/arm/crypto/.gitignore index 6231d36b3635..31e1f538df7d 100644 --- a/arch/arm/crypto/.gitignore +++ b/arch/arm/crypto/.gitignore @@ -1 +1,3 @@ aesbs-core.S +sha256-core.S +sha512-core.S diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index 83c50193626c..30b3bc1666d2 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -13,6 +13,7 @@ generic-y += kdebug.h generic-y += local.h generic-y += local64.h generic-y += mcs_spinlock.h +generic-y += mm-arch-hooks.h generic-y += msgbuf.h generic-y += param.h generic-y += parport.h diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h index 28b9bb35949e..8857d2869a5f 100644 --- a/arch/arm/include/asm/mach/pci.h +++ b/arch/arm/include/asm/mach/pci.h @@ -19,9 +19,7 @@ struct pci_bus; struct device; struct hw_pci { -#ifdef CONFIG_PCI_MSI struct msi_controller *msi_ctrl; -#endif struct pci_ops *ops; int nr_controllers; void **private_data; @@ -42,9 +40,6 @@ struct hw_pci { * Per-controller structure */ struct pci_sys_data { -#ifdef CONFIG_PCI_MSI - struct msi_controller *msi_ctrl; -#endif struct list_head node; int busnr; /* primary bus number */ u64 mem_offset; /* bus->cpu memory mapping offset */ diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 6f225acc07c5..b7f6fb462ea0 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -286,7 +286,7 @@ extern phys_addr_t (*arch_virt_to_idmap)(unsigned long x); */ static inline phys_addr_t __virt_to_idmap(unsigned long x) { - if (arch_virt_to_idmap) + if (IS_ENABLED(CONFIG_MMU) && arch_virt_to_idmap) return arch_virt_to_idmap(x); else return __virt_to_phys(x); diff --git a/arch/arm/include/asm/mm-arch-hooks.h b/arch/arm/include/asm/mm-arch-hooks.h deleted file mode 100644 index 7056660c7cc4..000000000000 --- a/arch/arm/include/asm/mm-arch-hooks.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Architecture specific mm hooks - * - * Copyright (C) 2015, IBM Corporation - * Author: Laurent Dufour <ldufour@linux.vnet.ibm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _ASM_ARM_MM_ARCH_HOOKS_H -#define _ASM_ARM_MM_ARCH_HOOKS_H - -#endif /* _ASM_ARM_MM_ARCH_HOOKS_H */ diff --git a/arch/arm/include/asm/switch_to.h b/arch/arm/include/asm/switch_to.h index c99e259469f7..12ebfcc1d539 100644 --- a/arch/arm/include/asm/switch_to.h +++ b/arch/arm/include/asm/switch_to.h @@ -10,7 +10,9 @@ * CPU. */ #if defined(CONFIG_PREEMPT) && defined(CONFIG_SMP) && defined(CONFIG_CPU_V7) -#define finish_arch_switch(prev) dsb(ish) +#define __complete_pending_tlbi() dsb(ish) +#else +#define __complete_pending_tlbi() #endif /* @@ -22,6 +24,7 @@ extern struct task_struct *__switch_to(struct task_struct *, struct thread_info #define switch_to(prev,next,last) \ do { \ + __complete_pending_tlbi(); \ last = __switch_to(prev,task_thread_info(prev), task_thread_info(next)); \ } while (0) diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index fcbbbb1b9e95..874e1823f803 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -18,15 +18,6 @@ static int debug_pci; -#ifdef CONFIG_PCI_MSI -struct msi_controller *pcibios_msi_controller(struct pci_dev *dev) -{ - struct pci_sys_data *sysdata = dev->bus->sysdata; - - return sysdata->msi_ctrl; -} -#endif - /* * We can't use pci_get_device() here since we are * called from interrupt context. @@ -459,12 +450,9 @@ static void pcibios_init_hw(struct device *parent, struct hw_pci *hw, for (nr = busnr = 0; nr < hw->nr_controllers; nr++) { sys = kzalloc(sizeof(struct pci_sys_data), GFP_KERNEL); - if (!sys) - panic("PCI: unable to allocate sys data!"); + if (WARN(!sys, "PCI: unable to allocate sys data!")) + break; -#ifdef CONFIG_PCI_MSI - sys->msi_ctrl = hw->msi_ctrl; -#endif sys->busnr = busnr; sys->swizzle = hw->swizzle; sys->map_irq = hw->map_irq; @@ -486,11 +474,14 @@ static void pcibios_init_hw(struct device *parent, struct hw_pci *hw, if (hw->scan) sys->bus = hw->scan(nr, sys); else - sys->bus = pci_scan_root_bus(parent, sys->busnr, - hw->ops, sys, &sys->resources); + sys->bus = pci_scan_root_bus_msi(parent, + sys->busnr, hw->ops, sys, + &sys->resources, hw->msi_ctrl); - if (!sys->bus) - panic("PCI: unable to scan bus!"); + if (WARN(!sys->bus, "PCI: unable to scan bus!")) { + kfree(sys); + break; + } busnr = sys->bus->busn_res.end + 1; @@ -521,6 +512,8 @@ void pci_common_init_dev(struct device *parent, struct hw_pci *hw) struct pci_bus *bus = sys->bus; if (!pci_has_flag(PCI_PROBE_ONLY)) { + struct pci_bus *child; + /* * Size the bridge windows. */ @@ -530,25 +523,15 @@ void pci_common_init_dev(struct device *parent, struct hw_pci *hw) * Assign resources. */ pci_bus_assign_resources(bus); - } + list_for_each_entry(child, &bus->children, node) + pcie_bus_configure_settings(child); + } /* * Tell drivers about devices found. */ pci_bus_add_devices(bus); } - - list_for_each_entry(sys, &head, node) { - struct pci_bus *bus = sys->bus; - - /* Configure PCI Express settings */ - if (bus && !pci_has_flag(PCI_PROBE_ONLY)) { - struct pci_bus *child; - - list_for_each_entry(child, &bus->children, node) - pcie_bus_configure_settings(child); - } - } } #ifndef CONFIG_PCI_HOST_ITE8152 diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 92828a1dec80..b48dd4f37f80 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -61,6 +61,7 @@ work_pending: movlt scno, #(__NR_restart_syscall - __NR_SYSCALL_BASE) ldmia sp, {r0 - r6} @ have to reload r0 - r6 b local_restart @ ... and off we go +ENDPROC(ret_fast_syscall) /* * "slow" syscall return path. "why" tells us if this was a real syscall. diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index bd755d97e459..29e2991465cb 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -399,6 +399,9 @@ ENTRY(secondary_startup) sub lr, r4, r5 @ mmu has been enabled add r3, r7, lr ldrd r4, [r3, #0] @ get secondary_data.pgdir +ARM_BE8(eor r4, r4, r5) @ Swap r5 and r4 in BE: +ARM_BE8(eor r5, r4, r5) @ it can be done in 3 steps +ARM_BE8(eor r4, r4, r5) @ without using a temp reg. ldr r8, [r3, #8] @ get secondary_data.swapper_pg_dir badr lr, __enable_mmu @ return address mov r13, r12 @ __secondary_switched address diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 357f57ea83f4..54272e0be713 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -818,12 +818,13 @@ static int of_pmu_irq_cfg(struct arm_pmu *pmu) if (arch_find_n_match_cpu_physical_id(dn, cpu, NULL)) break; - of_node_put(dn); if (cpu >= nr_cpu_ids) { pr_warn("Failed to find logical CPU for %s\n", dn->name); + of_node_put(dn); break; } + of_node_put(dn); irqs[i] = cpu; cpumask_set_cpu(cpu, &pmu->supported_cpus); diff --git a/arch/arm/kernel/reboot.c b/arch/arm/kernel/reboot.c index 1a4d232796be..38269358fd25 100644 --- a/arch/arm/kernel/reboot.c +++ b/arch/arm/kernel/reboot.c @@ -50,7 +50,7 @@ static void __soft_restart(void *addr) flush_cache_all(); /* Switch to the identity mapping. */ - phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset); + phys_reset = (phys_reset_t)(unsigned long)virt_to_idmap(cpu_reset); phys_reset((unsigned long)addr); /* Should never get here. */ diff --git a/arch/arm/kernel/vdso.c b/arch/arm/kernel/vdso.c index efe17dd9b921..54a5aeab988d 100644 --- a/arch/arm/kernel/vdso.c +++ b/arch/arm/kernel/vdso.c @@ -296,7 +296,6 @@ static bool tk_is_cntvct(const struct timekeeper *tk) */ void update_vsyscall(struct timekeeper *tk) { - struct timespec xtime_coarse; struct timespec64 *wtm = &tk->wall_to_monotonic; if (!cntvct_ok) { @@ -308,10 +307,10 @@ void update_vsyscall(struct timekeeper *tk) vdso_write_begin(vdso_data); - xtime_coarse = __current_kernel_time(); vdso_data->tk_is_cntvct = tk_is_cntvct(tk); - vdso_data->xtime_coarse_sec = xtime_coarse.tv_sec; - vdso_data->xtime_coarse_nsec = xtime_coarse.tv_nsec; + vdso_data->xtime_coarse_sec = tk->xtime_sec; + vdso_data->xtime_coarse_nsec = (u32)(tk->tkr_mono.xtime_nsec >> + tk->tkr_mono.shift); vdso_data->wtm_clock_sec = wtm->tv_sec; vdso_data->wtm_clock_nsec = wtm->tv_nsec; diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c index 3e58d710013c..4b39af2dfda9 100644 --- a/arch/arm/lib/uaccess_with_memcpy.c +++ b/arch/arm/lib/uaccess_with_memcpy.c @@ -96,7 +96,7 @@ __copy_to_user_memcpy(void __user *to, const void *from, unsigned long n) } /* the mmap semaphore is taken only if not in an atomic context */ - atomic = in_atomic(); + atomic = faulthandler_disabled(); if (!atomic) down_read(¤t->mm->mmap_sem); diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index eaf58f88ef5d..685826c4a710 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -8,7 +8,6 @@ * Licensed under GPLv2 or later. */ -#include <linux/clk-provider.h> #include <linux/of.h> #include <linux/of_platform.h> diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index ddfdd820e6f2..29e08aac8294 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -1010,11 +1010,13 @@ static struct davinci_spi_platform_data da8xx_spi_pdata[] = { .version = SPI_VERSION_2, .intr_line = 1, .dma_event_q = EVENTQ_0, + .prescaler_limit = 2, }, [1] = { .version = SPI_VERSION_2, .intr_line = 1, .dma_event_q = EVENTQ_0, + .prescaler_limit = 2, }, }; diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 9cbeda798584..567dc56fe8cd 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -411,6 +411,7 @@ static struct davinci_spi_platform_data dm355_spi0_pdata = { .num_chipselect = 2, .cshold_bug = true, .dma_event_q = EVENTQ_1, + .prescaler_limit = 1, }; static struct platform_device dm355_spi0_device = { .name = "spi_davinci", diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index e3a3c54b6832..6a890a8486d0 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -646,6 +646,7 @@ static struct davinci_spi_platform_data dm365_spi0_pdata = { .version = SPI_VERSION_1, .num_chipselect = 2, .dma_event_q = EVENTQ_3, + .prescaler_limit = 1, }; static struct resource dm365_spi0_resources[] = { diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index 6001f1c9d136..4a87e86dec45 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -146,9 +146,8 @@ static __init int exynos4_pm_init_power_domain(void) pd->base = of_iomap(np, 0); if (!pd->base) { pr_warn("%s: failed to map memory\n", __func__); - kfree(pd->pd.name); + kfree_const(pd->pd.name); kfree(pd); - of_node_put(np); continue; } diff --git a/arch/arm/mach-hisi/hisilicon.c b/arch/arm/mach-hisi/hisilicon.c index c6bd7c7bd4aa..8cc62150116a 100644 --- a/arch/arm/mach-hisi/hisilicon.c +++ b/arch/arm/mach-hisi/hisilicon.c @@ -11,7 +11,6 @@ * published by the Free Software Foundation. */ -#include <linux/clk-provider.h> #include <linux/clocksource.h> #include <linux/irqchip.h> diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index 80bad29d609a..8c4467fad837 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -291,8 +291,6 @@ void __init imx_gpc_check_dt(void) } } -#ifdef CONFIG_PM_GENERIC_DOMAINS - static void _imx6q_pm_pu_power_off(struct generic_pm_domain *genpd) { int iso, iso2sw; @@ -399,7 +397,6 @@ static struct genpd_onecell_data imx_gpc_onecell_data = { static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg) { struct clk *clk; - bool is_off; int i; imx6q_pu_domain.reg = pu_reg; @@ -416,18 +413,13 @@ static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg) } imx6q_pu_domain.num_clks = i; - is_off = IS_ENABLED(CONFIG_PM); - if (is_off) { - _imx6q_pm_pu_power_off(&imx6q_pu_domain.base); - } else { - /* - * Enable power if compiled without CONFIG_PM in case the - * bootloader disabled it. - */ - imx6q_pm_pu_power_on(&imx6q_pu_domain.base); - } + /* Enable power always in case bootloader disabled it. */ + imx6q_pm_pu_power_on(&imx6q_pu_domain.base); + + if (!IS_ENABLED(CONFIG_PM_GENERIC_DOMAINS)) + return 0; - pm_genpd_init(&imx6q_pu_domain.base, NULL, is_off); + pm_genpd_init(&imx6q_pu_domain.base, NULL, false); return of_genpd_add_provider_onecell(dev->of_node, &imx_gpc_onecell_data); @@ -437,13 +429,6 @@ clk_err: return -EINVAL; } -#else -static inline int imx_gpc_genpd_init(struct device *dev, struct regulator *reg) -{ - return 0; -} -#endif /* CONFIG_PM_GENERIC_DOMAINS */ - static int imx_gpc_probe(struct platform_device *pdev) { struct regulator *pu_reg; diff --git a/arch/arm/mach-keystone/pm_domain.c b/arch/arm/mach-keystone/pm_domain.c index edea697e8253..e283939a216f 100644 --- a/arch/arm/mach-keystone/pm_domain.c +++ b/arch/arm/mach-keystone/pm_domain.c @@ -16,7 +16,6 @@ #include <linux/pm_runtime.h> #include <linux/pm_clock.h> #include <linux/platform_device.h> -#include <linux/clk-provider.h> #include <linux/of.h> static struct dev_pm_domain keystone_pm_domain = { diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c index afee9083ad92..9f739f3cad4c 100644 --- a/arch/arm/mach-mvebu/board-v7.c +++ b/arch/arm/mach-mvebu/board-v7.c @@ -14,7 +14,6 @@ #include <linux/kernel.h> #include <linux/init.h> -#include <linux/clk-provider.h> #include <linux/of_address.h> #include <linux/of_fdt.h> #include <linux/of_platform.h> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index ecc04ff13e95..4a023e8d1bdb 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -60,6 +60,7 @@ config SOC_AM43XX select ARM_GIC select MACH_OMAP_GENERIC select MIGHT_HAVE_CACHE_L2X0 + select HAVE_ARM_SCU config SOC_DRA7XX bool "TI DRA7XX" diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 903c85be2897..7892c7d3b6f4 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -12,8 +12,7 @@ obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o timer.o pm.o \ hwmod-common = omap_hwmod.o omap_hwmod_reset.o \ omap_hwmod_common_data.o -clock-common = clock.o clock_common_data.o \ - clkt_dpll.o clkt_clksel.o +clock-common = clock.o secure-common = omap-smc.o omap-secure.o obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) @@ -182,24 +181,17 @@ obj-$(CONFIG_SOC_DRA7XX) += $(clockdomain-common) obj-$(CONFIG_SOC_DRA7XX) += clockdomains7xx_data.o # Clock framework -obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o +obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpllcore.o obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o -obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o clkt_iclk.o -obj-$(CONFIG_SOC_OMAP2430) += clock2430.o -obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o -obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clkt34xx_dpll3m2.o -obj-$(CONFIG_ARCH_OMAP3) += clock3517.o clock36xx.o -obj-$(CONFIG_ARCH_OMAP3) += dpll3xxx.o -obj-$(CONFIG_ARCH_OMAP3) += clkt_iclk.o +obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o +obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) +obj-$(CONFIG_ARCH_OMAP3) += clkt34xx_dpll3m2.o obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) -obj-$(CONFIG_ARCH_OMAP4) += dpll3xxx.o dpll44xx.o -obj-$(CONFIG_SOC_AM33XX) += $(clock-common) dpll3xxx.o +obj-$(CONFIG_SOC_AM33XX) += $(clock-common) obj-$(CONFIG_SOC_OMAP5) += $(clock-common) -obj-$(CONFIG_SOC_OMAP5) += dpll3xxx.o dpll44xx.o obj-$(CONFIG_SOC_DRA7XX) += $(clock-common) -obj-$(CONFIG_SOC_DRA7XX) += dpll3xxx.o dpll44xx.o -obj-$(CONFIG_SOC_AM43XX) += $(clock-common) dpll3xxx.o +obj-$(CONFIG_SOC_AM43XX) += $(clock-common) # OMAP2 clock rate set data (old "OPP" data) obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c index eb69acf21014..3f6521313c93 100644 --- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c +++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c @@ -23,12 +23,13 @@ #include "clock.h" #include "clock3xxx.h" -#include "clock34xx.h" #include "sdrc.h" #include "sram.h" #define CYCLES_PER_MHZ 1000000 +struct clk *sdrc_ick_p, *arm_fck_p; + /* * CORE DPLL (DPLL3) M2 divider rate programming functions * @@ -60,12 +61,14 @@ int omap3_core_dpll_m2_set_rate(struct clk_hw *hw, unsigned long rate, if (!clk || !rate) return -EINVAL; - validrate = omap2_clksel_round_rate_div(clk, rate, &new_div); + new_div = DIV_ROUND_UP(parent_rate, rate); + validrate = parent_rate / new_div; + if (validrate != rate) return -EINVAL; - sdrcrate = __clk_get_rate(sdrc_ick_p); - clkrate = __clk_get_rate(hw->clk); + sdrcrate = clk_get_rate(sdrc_ick_p); + clkrate = clk_hw_get_rate(hw); if (rate > clkrate) sdrcrate <<= ((rate / clkrate) >> 1); else @@ -83,7 +86,7 @@ int omap3_core_dpll_m2_set_rate(struct clk_hw *hw, unsigned long rate, /* * XXX This only needs to be done when the CPU frequency changes */ - _mpurate = __clk_get_rate(arm_fck_p) / CYCLES_PER_MHZ; + _mpurate = clk_get_rate(arm_fck_p) / CYCLES_PER_MHZ; c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT; c += 1; /* for safety */ c *= SDRC_MPURATE_LOOPS; diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c deleted file mode 100644 index 7ee26108ac0d..000000000000 --- a/arch/arm/mach-omap2/clkt_clksel.c +++ /dev/null @@ -1,466 +0,0 @@ -/* - * clkt_clksel.c - OMAP2/3/4 clksel clock functions - * - * Copyright (C) 2005-2008 Texas Instruments, Inc. - * Copyright (C) 2004-2010 Nokia Corporation - * - * Contacts: - * Richard Woodruff <r-woodruff2@ti.com> - * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * - * clksel clocks are clocks that do not have a fixed parent, or that - * can divide their parent's rate, or possibly both at the same time, based - * on the contents of a hardware register bitfield. - * - * All of the various mux and divider settings can be encoded into - * struct clksel* data structures, and then these can be autogenerated - * from some hardware database for each new chip generation. This - * should avoid the need to write, review, and validate a lot of new - * clock code for each new chip, since it can be exported from the SoC - * design flow. This is now done on OMAP4. - * - * The fusion of mux and divider clocks is a software creation. In - * hardware reality, the multiplexer (parent selection) and the - * divider exist separately. XXX At some point these clksel clocks - * should be split into "divider" clocks and "mux" clocks to better - * match the hardware. - * - * (The name "clksel" comes from the name of the corresponding - * register field in the OMAP2/3 family of SoCs.) - * - * XXX Currently these clocks are only used in the OMAP2/3/4 code, but - * many of the OMAP1 clocks should be convertible to use this - * mechanism. - */ -#undef DEBUG - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/clk-provider.h> -#include <linux/io.h> -#include <linux/bug.h> - -#include "clock.h" - -/* Private functions */ - -/** - * _get_clksel_by_parent() - return clksel struct for a given clk & parent - * @clk: OMAP struct clk ptr to inspect - * @src_clk: OMAP struct clk ptr of the parent clk to search for - * - * Scan the struct clksel array associated with the clock to find - * the element associated with the supplied parent clock address. - * Returns a pointer to the struct clksel on success or NULL on error. - */ -static const struct clksel *_get_clksel_by_parent(struct clk_hw_omap *clk, - struct clk *src_clk) -{ - const struct clksel *clks; - - if (!src_clk) - return NULL; - - for (clks = clk->clksel; clks->parent; clks++) - if (clks->parent == src_clk) - break; /* Found the requested parent */ - - if (!clks->parent) { - /* This indicates a data problem */ - WARN(1, "clock: %s: could not find parent clock %s in clksel array\n", - __clk_get_name(clk->hw.clk), __clk_get_name(src_clk)); - return NULL; - } - - return clks; -} - -/** - * _write_clksel_reg() - program a clock's clksel register in hardware - * @clk: struct clk * to program - * @v: clksel bitfield value to program (with LSB at bit 0) - * - * Shift the clksel register bitfield value @v to its appropriate - * location in the clksel register and write it in. This function - * will ensure that the write to the clksel_reg reaches its - * destination before returning -- important since PRM and CM register - * accesses can be quite slow compared to ARM cycles -- but does not - * take into account any time the hardware might take to switch the - * clock source. - */ -static void _write_clksel_reg(struct clk_hw_omap *clk, u32 field_val) -{ - u32 v; - - v = omap2_clk_readl(clk, clk->clksel_reg); - v &= ~clk->clksel_mask; - v |= field_val << __ffs(clk->clksel_mask); - omap2_clk_writel(v, clk, clk->clksel_reg); - - v = omap2_clk_readl(clk, clk->clksel_reg); /* OCP barrier */ -} - -/** - * _clksel_to_divisor() - turn clksel field value into integer divider - * @clk: OMAP struct clk to use - * @field_val: register field value to find - * - * Given a struct clk of a rate-selectable clksel clock, and a register field - * value to search for, find the corresponding clock divisor. The register - * field value should be pre-masked and shifted down so the LSB is at bit 0 - * before calling. Returns 0 on error or returns the actual integer divisor - * upon success. - */ -static u32 _clksel_to_divisor(struct clk_hw_omap *clk, u32 field_val) -{ - const struct clksel *clks; - const struct clksel_rate *clkr; - struct clk *parent; - - parent = __clk_get_parent(clk->hw.clk); - - clks = _get_clksel_by_parent(clk, parent); - if (!clks) - return 0; - - for (clkr = clks->rates; clkr->div; clkr++) { - if (!(clkr->flags & cpu_mask)) - continue; - - if (clkr->val == field_val) - break; - } - - if (!clkr->div) { - /* This indicates a data error */ - WARN(1, "clock: %s: could not find fieldval %d for parent %s\n", - __clk_get_name(clk->hw.clk), field_val, - __clk_get_name(parent)); - return 0; - } - - return clkr->div; -} - -/** - * _divisor_to_clksel() - turn clksel integer divisor into a field value - * @clk: OMAP struct clk to use - * @div: integer divisor to search for - * - * Given a struct clk of a rate-selectable clksel clock, and a clock - * divisor, find the corresponding register field value. Returns the - * register field value _before_ left-shifting (i.e., LSB is at bit - * 0); or returns 0xFFFFFFFF (~0) upon error. - */ -static u32 _divisor_to_clksel(struct clk_hw_omap *clk, u32 div) -{ - const struct clksel *clks; - const struct clksel_rate *clkr; - struct clk *parent; - - /* should never happen */ - WARN_ON(div == 0); - - parent = __clk_get_parent(clk->hw.clk); - clks = _get_clksel_by_parent(clk, parent); - if (!clks) - return ~0; - - for (clkr = clks->rates; clkr->div; clkr++) { - if (!(clkr->flags & cpu_mask)) - continue; - - if (clkr->div == div) - break; - } - - if (!clkr->div) { - pr_err("clock: %s: could not find divisor %d for parent %s\n", - __clk_get_name(clk->hw.clk), div, - __clk_get_name(parent)); - return ~0; - } - - return clkr->val; -} - -/** - * _read_divisor() - get current divisor applied to parent clock (from hdwr) - * @clk: OMAP struct clk to use. - * - * Read the current divisor register value for @clk that is programmed - * into the hardware, convert it into the actual divisor value, and - * return it; or return 0 on error. - */ -static u32 _read_divisor(struct clk_hw_omap *clk) -{ - u32 v; - - if (!clk->clksel || !clk->clksel_mask) - return 0; - - v = omap2_clk_readl(clk, clk->clksel_reg); - v &= clk->clksel_mask; - v >>= __ffs(clk->clksel_mask); - - return _clksel_to_divisor(clk, v); -} - -/* Public functions */ - -/** - * omap2_clksel_round_rate_div() - find divisor for the given clock and rate - * @clk: OMAP struct clk to use - * @target_rate: desired clock rate - * @new_div: ptr to where we should store the divisor - * - * Finds 'best' divider value in an array based on the source and target - * rates. The divider array must be sorted with smallest divider first. - * This function is also used by the DPLL3 M2 divider code. - * - * Returns the rounded clock rate or returns 0xffffffff on error. - */ -u32 omap2_clksel_round_rate_div(struct clk_hw_omap *clk, - unsigned long target_rate, - u32 *new_div) -{ - unsigned long test_rate; - const struct clksel *clks; - const struct clksel_rate *clkr; - u32 last_div = 0; - struct clk *parent; - unsigned long parent_rate; - const char *clk_name; - - parent = __clk_get_parent(clk->hw.clk); - clk_name = __clk_get_name(clk->hw.clk); - parent_rate = __clk_get_rate(parent); - - if (!clk->clksel || !clk->clksel_mask) - return ~0; - - pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n", - clk_name, target_rate); - - *new_div = 1; - - clks = _get_clksel_by_parent(clk, parent); - if (!clks) - return ~0; - - for (clkr = clks->rates; clkr->div; clkr++) { - if (!(clkr->flags & cpu_mask)) - continue; - - /* Sanity check */ - if (clkr->div <= last_div) - pr_err("clock: %s: clksel_rate table not sorted\n", - clk_name); - - last_div = clkr->div; - - test_rate = parent_rate / clkr->div; - - if (test_rate <= target_rate) - break; /* found it */ - } - - if (!clkr->div) { - pr_err("clock: %s: could not find divisor for target rate %ld for parent %s\n", - clk_name, target_rate, __clk_get_name(parent)); - return ~0; - } - - *new_div = clkr->div; - - pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div, - (parent_rate / clkr->div)); - - return parent_rate / clkr->div; -} - -/* - * Clocktype interface functions to the OMAP clock code - * (i.e., those used in struct clk field function pointers, etc.) - */ - -/** - * omap2_clksel_find_parent_index() - return the array index of the current - * hardware parent of @hw - * @hw: struct clk_hw * to find the current hardware parent of - * - * Given a struct clk_hw pointer @hw to the 'hw' member of a struct - * clk_hw_omap record representing a source-selectable hardware clock, - * read the hardware register and determine what its parent is - * currently set to. Intended to be called only by the common clock - * framework struct clk_hw_ops.get_parent function pointer. Return - * the array index of this parent clock upon success -- there is no - * way to return an error, so if we encounter an error, just WARN() - * and pretend that we know that we're doing. - */ -u8 omap2_clksel_find_parent_index(struct clk_hw *hw) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - const struct clksel *clks; - const struct clksel_rate *clkr; - u32 r, found = 0; - struct clk *parent; - const char *clk_name; - int ret = 0, f = 0; - - parent = __clk_get_parent(hw->clk); - clk_name = __clk_get_name(hw->clk); - - /* XXX should be able to return an error */ - WARN((!clk->clksel || !clk->clksel_mask), - "clock: %s: attempt to call on a non-clksel clock", clk_name); - - r = omap2_clk_readl(clk, clk->clksel_reg) & clk->clksel_mask; - r >>= __ffs(clk->clksel_mask); - - for (clks = clk->clksel; clks->parent && !found; clks++) { - for (clkr = clks->rates; clkr->div && !found; clkr++) { - if (!(clkr->flags & cpu_mask)) - continue; - - if (clkr->val == r) { - found = 1; - ret = f; - } - } - f++; - } - - /* This indicates a data error */ - WARN(!found, "clock: %s: init parent: could not find regval %0x\n", - clk_name, r); - - return ret; -} - - -/** - * omap2_clksel_recalc() - function ptr to pass via struct clk .recalc field - * @clk: struct clk * - * - * This function is intended to be called only by the clock framework. - * Each clksel clock should have its struct clk .recalc field set to this - * function. Returns the clock's current rate, based on its parent's rate - * and its current divisor setting in the hardware. - */ -unsigned long omap2_clksel_recalc(struct clk_hw *hw, unsigned long parent_rate) -{ - unsigned long rate; - u32 div = 0; - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - - if (!parent_rate) - return 0; - - div = _read_divisor(clk); - if (!div) - rate = parent_rate; - else - rate = parent_rate / div; - - pr_debug("%s: recalc'd %s's rate to %lu (div %d)\n", __func__, - __clk_get_name(hw->clk), rate, div); - - return rate; -} - -/** - * omap2_clksel_round_rate() - find rounded rate for the given clock and rate - * @clk: OMAP struct clk to use - * @target_rate: desired clock rate - * - * This function is intended to be called only by the clock framework. - * Finds best target rate based on the source clock and possible dividers. - * rates. The divider array must be sorted with smallest divider first. - * - * Returns the rounded clock rate or returns 0xffffffff on error. - */ -long omap2_clksel_round_rate(struct clk_hw *hw, unsigned long target_rate, - unsigned long *parent_rate) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - u32 new_div; - - return omap2_clksel_round_rate_div(clk, target_rate, &new_div); -} - -/** - * omap2_clksel_set_rate() - program clock rate in hardware - * @clk: struct clk * to program rate - * @rate: target rate to program - * - * This function is intended to be called only by the clock framework. - * Program @clk's rate to @rate in the hardware. The clock can be - * either enabled or disabled when this happens, although if the clock - * is enabled, some downstream devices may glitch or behave - * unpredictably when the clock rate is changed - this depends on the - * hardware. This function does not currently check the usecount of - * the clock, so if multiple drivers are using the clock, and the rate - * is changed, they will all be affected without any notification. - * Returns -EINVAL upon error, or 0 upon success. - */ -int omap2_clksel_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - u32 field_val, validrate, new_div = 0; - - if (!clk->clksel || !clk->clksel_mask) - return -EINVAL; - - validrate = omap2_clksel_round_rate_div(clk, rate, &new_div); - if (validrate != rate) - return -EINVAL; - - field_val = _divisor_to_clksel(clk, new_div); - if (field_val == ~0) - return -EINVAL; - - _write_clksel_reg(clk, field_val); - - pr_debug("clock: %s: set rate to %ld\n", __clk_get_name(hw->clk), - __clk_get_rate(hw->clk)); - - return 0; -} - -/* - * Clksel parent setting function - not passed in struct clk function - * pointer - instead, the OMAP clock code currently assumes that any - * parent-setting clock is a clksel clock, and calls - * omap2_clksel_set_parent() by default - */ - -/** - * omap2_clksel_set_parent() - change a clock's parent clock - * @clk: struct clk * of the child clock - * @new_parent: struct clk * of the new parent clock - * - * This function is intended to be called only by the clock framework. - * Change the parent clock of clock @clk to @new_parent. This is - * intended to be used while @clk is disabled. This function does not - * currently check the usecount of the clock, so if multiple drivers - * are using the clock, and the parent is changed, they will all be - * affected without any notification. Returns -EINVAL upon error, or - * 0 upon success. - */ -int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - - if (!clk->clksel || !clk->clksel_mask) - return -EINVAL; - - _write_clksel_reg(clk, field_val); - return 0; -} diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c deleted file mode 100644 index f251a14cbf16..000000000000 --- a/arch/arm/mach-omap2/clkt_dpll.c +++ /dev/null @@ -1,370 +0,0 @@ -/* - * OMAP2/3/4 DPLL clock functions - * - * Copyright (C) 2005-2008 Texas Instruments, Inc. - * Copyright (C) 2004-2010 Nokia Corporation - * - * Contacts: - * Richard Woodruff <r-woodruff2@ti.com> - * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#undef DEBUG - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/clk-provider.h> -#include <linux/io.h> - -#include <asm/div64.h> - -#include "clock.h" - -/* DPLL rate rounding: minimum DPLL multiplier, divider values */ -#define DPLL_MIN_MULTIPLIER 2 -#define DPLL_MIN_DIVIDER 1 - -/* Possible error results from _dpll_test_mult */ -#define DPLL_MULT_UNDERFLOW -1 - -/* - * Scale factor to mitigate roundoff errors in DPLL rate rounding. - * The higher the scale factor, the greater the risk of arithmetic overflow, - * but the closer the rounded rate to the target rate. DPLL_SCALE_FACTOR - * must be a power of DPLL_SCALE_BASE. - */ -#define DPLL_SCALE_FACTOR 64 -#define DPLL_SCALE_BASE 2 -#define DPLL_ROUNDING_VAL ((DPLL_SCALE_BASE / 2) * \ - (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE)) - -/* - * DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx. - * From device data manual section 4.3 "DPLL and DLL Specifications". - */ -#define OMAP3PLUS_DPLL_FINT_JTYPE_MIN 500000 -#define OMAP3PLUS_DPLL_FINT_JTYPE_MAX 2500000 - -/* _dpll_test_fint() return codes */ -#define DPLL_FINT_UNDERFLOW -1 -#define DPLL_FINT_INVALID -2 - -/* Private functions */ - -/* - * _dpll_test_fint - test whether an Fint value is valid for the DPLL - * @clk: DPLL struct clk to test - * @n: divider value (N) to test - * - * Tests whether a particular divider @n will result in a valid DPLL - * internal clock frequency Fint. See the 34xx TRM 4.7.6.2 "DPLL Jitter - * Correction". Returns 0 if OK, -1 if the enclosing loop can terminate - * (assuming that it is counting N upwards), or -2 if the enclosing loop - * should skip to the next iteration (again assuming N is increasing). - */ -static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n) -{ - struct dpll_data *dd; - long fint, fint_min, fint_max; - int ret = 0; - - dd = clk->dpll_data; - - /* DPLL divider must result in a valid jitter correction val */ - fint = __clk_get_rate(__clk_get_parent(clk->hw.clk)) / n; - - if (dd->flags & DPLL_J_TYPE) { - fint_min = OMAP3PLUS_DPLL_FINT_JTYPE_MIN; - fint_max = OMAP3PLUS_DPLL_FINT_JTYPE_MAX; - } else { - fint_min = ti_clk_features.fint_min; - fint_max = ti_clk_features.fint_max; - } - - if (!fint_min || !fint_max) { - WARN(1, "No fint limits available!\n"); - return DPLL_FINT_INVALID; - } - - if (fint < ti_clk_features.fint_min) { - pr_debug("rejecting n=%d due to Fint failure, lowering max_divider\n", - n); - dd->max_divider = n; - ret = DPLL_FINT_UNDERFLOW; - } else if (fint > ti_clk_features.fint_max) { - pr_debug("rejecting n=%d due to Fint failure, boosting min_divider\n", - n); - dd->min_divider = n; - ret = DPLL_FINT_INVALID; - } else if (fint > ti_clk_features.fint_band1_max && - fint < ti_clk_features.fint_band2_min) { - pr_debug("rejecting n=%d due to Fint failure\n", n); - ret = DPLL_FINT_INVALID; - } - - return ret; -} - -static unsigned long _dpll_compute_new_rate(unsigned long parent_rate, - unsigned int m, unsigned int n) -{ - unsigned long long num; - - num = (unsigned long long)parent_rate * m; - do_div(num, n); - return num; -} - -/* - * _dpll_test_mult - test a DPLL multiplier value - * @m: pointer to the DPLL m (multiplier) value under test - * @n: current DPLL n (divider) value under test - * @new_rate: pointer to storage for the resulting rounded rate - * @target_rate: the desired DPLL rate - * @parent_rate: the DPLL's parent clock rate - * - * This code tests a DPLL multiplier value, ensuring that the - * resulting rate will not be higher than the target_rate, and that - * the multiplier value itself is valid for the DPLL. Initially, the - * integer pointed to by the m argument should be prescaled by - * multiplying by DPLL_SCALE_FACTOR. The code will replace this with - * a non-scaled m upon return. This non-scaled m will result in a - * new_rate as close as possible to target_rate (but not greater than - * target_rate) given the current (parent_rate, n, prescaled m) - * triple. Returns DPLL_MULT_UNDERFLOW in the event that the - * non-scaled m attempted to underflow, which can allow the calling - * function to bail out early; or 0 upon success. - */ -static int _dpll_test_mult(int *m, int n, unsigned long *new_rate, - unsigned long target_rate, - unsigned long parent_rate) -{ - int r = 0, carry = 0; - - /* Unscale m and round if necessary */ - if (*m % DPLL_SCALE_FACTOR >= DPLL_ROUNDING_VAL) - carry = 1; - *m = (*m / DPLL_SCALE_FACTOR) + carry; - - /* - * The new rate must be <= the target rate to avoid programming - * a rate that is impossible for the hardware to handle - */ - *new_rate = _dpll_compute_new_rate(parent_rate, *m, n); - if (*new_rate > target_rate) { - (*m)--; - *new_rate = 0; - } - - /* Guard against m underflow */ - if (*m < DPLL_MIN_MULTIPLIER) { - *m = DPLL_MIN_MULTIPLIER; - *new_rate = 0; - r = DPLL_MULT_UNDERFLOW; - } - - if (*new_rate == 0) - *new_rate = _dpll_compute_new_rate(parent_rate, *m, n); - - return r; -} - -/** - * _omap2_dpll_is_in_bypass - check if DPLL is in bypass mode or not - * @v: bitfield value of the DPLL enable - * - * Checks given DPLL enable bitfield to see whether the DPLL is in bypass - * mode or not. Returns 1 if the DPLL is in bypass, 0 otherwise. - */ -static int _omap2_dpll_is_in_bypass(u32 v) -{ - u8 mask, val; - - mask = ti_clk_features.dpll_bypass_vals; - - /* - * Each set bit in the mask corresponds to a bypass value equal - * to the bitshift. Go through each set-bit in the mask and - * compare against the given register value. - */ - while (mask) { - val = __ffs(mask); - mask ^= (1 << val); - if (v == val) - return 1; - } - - return 0; -} - -/* Public functions */ -u8 omap2_init_dpll_parent(struct clk_hw *hw) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - u32 v; - struct dpll_data *dd; - - dd = clk->dpll_data; - if (!dd) - return -EINVAL; - - v = omap2_clk_readl(clk, dd->control_reg); - v &= dd->enable_mask; - v >>= __ffs(dd->enable_mask); - - /* Reparent the struct clk in case the dpll is in bypass */ - if (_omap2_dpll_is_in_bypass(v)) - return 1; - - return 0; -} - -/** - * omap2_get_dpll_rate - returns the current DPLL CLKOUT rate - * @clk: struct clk * of a DPLL - * - * DPLLs can be locked or bypassed - basically, enabled or disabled. - * When locked, the DPLL output depends on the M and N values. When - * bypassed, on OMAP2xxx, the output rate is either the 32KiHz clock - * or sys_clk. Bypass rates on OMAP3 depend on the DPLL: DPLLs 1 and - * 2 are bypassed with dpll1_fclk and dpll2_fclk respectively - * (generated by DPLL3), while DPLL 3, 4, and 5 bypass rates are sys_clk. - * Returns the current DPLL CLKOUT rate (*not* CLKOUTX2) if the DPLL is - * locked, or the appropriate bypass rate if the DPLL is bypassed, or 0 - * if the clock @clk is not a DPLL. - */ -unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk) -{ - long long dpll_clk; - u32 dpll_mult, dpll_div, v; - struct dpll_data *dd; - - dd = clk->dpll_data; - if (!dd) - return 0; - - /* Return bypass rate if DPLL is bypassed */ - v = omap2_clk_readl(clk, dd->control_reg); - v &= dd->enable_mask; - v >>= __ffs(dd->enable_mask); - - if (_omap2_dpll_is_in_bypass(v)) - return __clk_get_rate(dd->clk_bypass); - - v = omap2_clk_readl(clk, dd->mult_div1_reg); - dpll_mult = v & dd->mult_mask; - dpll_mult >>= __ffs(dd->mult_mask); - dpll_div = v & dd->div1_mask; - dpll_div >>= __ffs(dd->div1_mask); - - dpll_clk = (long long) __clk_get_rate(dd->clk_ref) * dpll_mult; - do_div(dpll_clk, dpll_div + 1); - - return dpll_clk; -} - -/* DPLL rate rounding code */ - -/** - * omap2_dpll_round_rate - round a target rate for an OMAP DPLL - * @clk: struct clk * for a DPLL - * @target_rate: desired DPLL clock rate - * - * Given a DPLL and a desired target rate, round the target rate to a - * possible, programmable rate for this DPLL. Attempts to select the - * minimum possible n. Stores the computed (m, n) in the DPLL's - * dpll_data structure so set_rate() will not need to call this - * (expensive) function again. Returns ~0 if the target rate cannot - * be rounded, or the rounded rate upon success. - */ -long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate, - unsigned long *parent_rate) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - int m, n, r, scaled_max_m; - int min_delta_m = INT_MAX, min_delta_n = INT_MAX; - unsigned long scaled_rt_rp; - unsigned long new_rate = 0; - struct dpll_data *dd; - unsigned long ref_rate; - long delta; - long prev_min_delta = LONG_MAX; - const char *clk_name; - - if (!clk || !clk->dpll_data) - return ~0; - - dd = clk->dpll_data; - - ref_rate = __clk_get_rate(dd->clk_ref); - clk_name = __clk_get_name(hw->clk); - pr_debug("clock: %s: starting DPLL round_rate, target rate %lu\n", - clk_name, target_rate); - - scaled_rt_rp = target_rate / (ref_rate / DPLL_SCALE_FACTOR); - scaled_max_m = dd->max_multiplier * DPLL_SCALE_FACTOR; - - dd->last_rounded_rate = 0; - - for (n = dd->min_divider; n <= dd->max_divider; n++) { - - /* Is the (input clk, divider) pair valid for the DPLL? */ - r = _dpll_test_fint(clk, n); - if (r == DPLL_FINT_UNDERFLOW) - break; - else if (r == DPLL_FINT_INVALID) - continue; - - /* Compute the scaled DPLL multiplier, based on the divider */ - m = scaled_rt_rp * n; - - /* - * Since we're counting n up, a m overflow means we - * can bail out completely (since as n increases in - * the next iteration, there's no way that m can - * increase beyond the current m) - */ - if (m > scaled_max_m) - break; - - r = _dpll_test_mult(&m, n, &new_rate, target_rate, - ref_rate); - - /* m can't be set low enough for this n - try with a larger n */ - if (r == DPLL_MULT_UNDERFLOW) - continue; - - /* skip rates above our target rate */ - delta = target_rate - new_rate; - if (delta < 0) - continue; - - if (delta < prev_min_delta) { - prev_min_delta = delta; - min_delta_m = m; - min_delta_n = n; - } - - pr_debug("clock: %s: m = %d: n = %d: new_rate = %lu\n", - clk_name, m, n, new_rate); - - if (delta == 0) - break; - } - - if (prev_min_delta == LONG_MAX) { - pr_debug("clock: %s: cannot round to rate %lu\n", - clk_name, target_rate); - return ~0; - } - - dd->last_rounded_m = min_delta_m; - dd->last_rounded_n = min_delta_n; - dd->last_rounded_rate = target_rate - prev_min_delta; - - return dd->last_rounded_rate; -} - diff --git a/arch/arm/mach-omap2/clkt_iclk.c b/arch/arm/mach-omap2/clkt_iclk.c deleted file mode 100644 index 55eb579aeae1..000000000000 --- a/arch/arm/mach-omap2/clkt_iclk.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * OMAP2/3 interface clock control - * - * Copyright (C) 2011 Nokia Corporation - * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#undef DEBUG - -#include <linux/kernel.h> -#include <linux/clk-provider.h> -#include <linux/io.h> - -#include "clock.h" - -/* Register offsets */ -#define CM_AUTOIDLE 0x30 -#define CM_ICLKEN 0x10 - -/* Private functions */ - -/* XXX */ -void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk) -{ - u32 v; - void __iomem *r; - - r = (__force void __iomem *) - ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN)); - - v = omap2_clk_readl(clk, r); - v |= (1 << clk->enable_bit); - omap2_clk_writel(v, clk, r); -} - -/* XXX */ -void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk) -{ - u32 v; - void __iomem *r; - - r = (__force void __iomem *) - ((__force u32)clk->enable_reg ^ (CM_AUTOIDLE ^ CM_ICLKEN)); - - v = omap2_clk_readl(clk, r); - v &= ~(1 << clk->enable_bit); - omap2_clk_writel(v, clk, r); -} - -/* Public data */ - -const struct clk_hw_omap_ops clkhwops_iclk = { - .allow_idle = omap2_clkt_iclk_allow_idle, - .deny_idle = omap2_clkt_iclk_deny_idle, -}; - -const struct clk_hw_omap_ops clkhwops_iclk_wait = { - .allow_idle = omap2_clkt_iclk_allow_idle, - .deny_idle = omap2_clkt_iclk_deny_idle, - .find_idlest = omap2_clk_dflt_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; - - - diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index a699d7169307..acb60ed17273 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -20,12 +20,11 @@ #include <linux/errno.h> #include <linux/err.h> #include <linux/delay.h> +#include <linux/clk.h> #include <linux/clk-provider.h> #include <linux/io.h> #include <linux/bitops.h> -#include <linux/regmap.h> #include <linux/of_address.h> -#include <linux/bootmem.h> #include <asm/cpu.h> #include <trace/events/power.h> @@ -40,19 +39,8 @@ #include "cm-regbits-34xx.h" #include "common.h" -/* - * MAX_MODULE_ENABLE_WAIT: maximum of number of microseconds to wait - * for a module to indicate that it is no longer in idle - */ -#define MAX_MODULE_ENABLE_WAIT 100000 - u16 cpu_mask; -/* - * Clock features setup. Used instead of CPU type checks. - */ -struct ti_clk_features ti_clk_features; - /* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */ #define OMAP3430_DPLL_FINT_BAND1_MIN 750000 #define OMAP3430_DPLL_FINT_BAND1_MAX 2100000 @@ -66,119 +54,24 @@ struct ti_clk_features ti_clk_features; #define OMAP3PLUS_DPLL_FINT_MIN 32000 #define OMAP3PLUS_DPLL_FINT_MAX 52000000 -/* - * clkdm_control: if true, then when a clock is enabled in the - * hardware, its clockdomain will first be enabled; and when a clock - * is disabled in the hardware, its clockdomain will be disabled - * afterwards. - */ -static bool clkdm_control = true; - -static LIST_HEAD(clk_hw_omap_clocks); - -struct clk_iomap { - struct regmap *regmap; - void __iomem *mem; -}; - -static struct clk_iomap *clk_memmaps[CLK_MAX_MEMMAPS]; - -static void clk_memmap_writel(u32 val, void __iomem *reg) -{ - struct clk_omap_reg *r = (struct clk_omap_reg *)® - struct clk_iomap *io = clk_memmaps[r->index]; - - if (io->regmap) - regmap_write(io->regmap, r->offset, val); - else - writel_relaxed(val, io->mem + r->offset); -} - -static u32 clk_memmap_readl(void __iomem *reg) -{ - u32 val; - struct clk_omap_reg *r = (struct clk_omap_reg *)® - struct clk_iomap *io = clk_memmaps[r->index]; - - if (io->regmap) - regmap_read(io->regmap, r->offset, &val); - else - val = readl_relaxed(io->mem + r->offset); - - return val; -} - -void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg) -{ - if (WARN_ON_ONCE(!(clk->flags & MEMMAP_ADDRESSING))) - writel_relaxed(val, reg); - else - clk_memmap_writel(val, reg); -} - -u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg) -{ - if (WARN_ON_ONCE(!(clk->flags & MEMMAP_ADDRESSING))) - return readl_relaxed(reg); - else - return clk_memmap_readl(reg); -} - static struct ti_clk_ll_ops omap_clk_ll_ops = { - .clk_readl = clk_memmap_readl, - .clk_writel = clk_memmap_writel, + .clkdm_clk_enable = clkdm_clk_enable, + .clkdm_clk_disable = clkdm_clk_disable, + .cm_wait_module_ready = omap_cm_wait_module_ready, + .cm_split_idlest_reg = cm_split_idlest_reg, }; /** - * omap2_clk_provider_init - initialize a clock provider - * @match_table: DT device table to match for devices to init - * @np: device node pointer for the this clock provider - * @index: index for the clock provider - + @syscon: syscon regmap pointer - * @mem: iomem pointer for the clock provider memory area, only used if - * syscon is not provided + * omap2_clk_setup_ll_ops - setup clock driver low-level ops * - * Initializes a clock provider module (CM/PRM etc.), registering - * the memory mapping at specified index and initializing the - * low level driver infrastructure. Returns 0 in success. + * Sets up clock driver low-level platform ops. These are needed + * for register accesses and various other misc platform operations. + * Returns 0 on success, -EBUSY if low level ops have been registered + * already. */ -int __init omap2_clk_provider_init(struct device_node *np, int index, - struct regmap *syscon, void __iomem *mem) +int __init omap2_clk_setup_ll_ops(void) { - struct clk_iomap *io; - - ti_clk_ll_ops = &omap_clk_ll_ops; - - io = kzalloc(sizeof(*io), GFP_KERNEL); - - io->regmap = syscon; - io->mem = mem; - - clk_memmaps[index] = io; - - ti_dt_clk_init_provider(np, index); - - return 0; -} - -/** - * omap2_clk_legacy_provider_init - initialize a legacy clock provider - * @index: index for the clock provider - * @mem: iomem pointer for the clock provider memory area - * - * Initializes a legacy clock provider memory mapping. - */ -void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem) -{ - struct clk_iomap *io; - - ti_clk_ll_ops = &omap_clk_ll_ops; - - io = memblock_virt_alloc(sizeof(*io), 0); - - io->mem = mem; - - clk_memmaps[index] = io; + return ti_clk_setup_ll_ops(&omap_clk_ll_ops); } /* @@ -187,77 +80,6 @@ void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem) /* Private functions */ - -/** - * _wait_idlest_generic - wait for a module to leave the idle state - * @clk: module clock to wait for (needed for register offsets) - * @reg: virtual address of module IDLEST register - * @mask: value to mask against to determine if the module is active - * @idlest: idle state indicator (0 or 1) for the clock - * @name: name of the clock (for printk) - * - * Wait for a module to leave idle, where its idle-status register is - * not inside the CM module. Returns 1 if the module left idle - * promptly, or 0 if the module did not leave idle before the timeout - * elapsed. XXX Deprecated - should be moved into drivers for the - * individual IP block that the IDLEST register exists in. - */ -static int _wait_idlest_generic(struct clk_hw_omap *clk, void __iomem *reg, - u32 mask, u8 idlest, const char *name) -{ - int i = 0, ena = 0; - - ena = (idlest) ? 0 : mask; - - omap_test_timeout(((omap2_clk_readl(clk, reg) & mask) == ena), - MAX_MODULE_ENABLE_WAIT, i); - - if (i < MAX_MODULE_ENABLE_WAIT) - pr_debug("omap clock: module associated with clock %s ready after %d loops\n", - name, i); - else - pr_err("omap clock: module associated with clock %s didn't enable in %d tries\n", - name, MAX_MODULE_ENABLE_WAIT); - - return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0; -}; - -/** - * _omap2_module_wait_ready - wait for an OMAP module to leave IDLE - * @clk: struct clk * belonging to the module - * - * If the necessary clocks for the OMAP hardware IP block that - * corresponds to clock @clk are enabled, then wait for the module to - * indicate readiness (i.e., to leave IDLE). This code does not - * belong in the clock code and will be moved in the medium term to - * module-dependent code. No return value. - */ -static void _omap2_module_wait_ready(struct clk_hw_omap *clk) -{ - void __iomem *companion_reg, *idlest_reg; - u8 other_bit, idlest_bit, idlest_val, idlest_reg_id; - s16 prcm_mod; - int r; - - /* Not all modules have multiple clocks that their IDLEST depends on */ - if (clk->ops->find_companion) { - clk->ops->find_companion(clk, &companion_reg, &other_bit); - if (!(omap2_clk_readl(clk, companion_reg) & (1 << other_bit))) - return; - } - - clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val); - r = cm_split_idlest_reg(idlest_reg, &prcm_mod, &idlest_reg_id); - if (r) { - /* IDLEST register not in the CM module */ - _wait_idlest_generic(clk, idlest_reg, (1 << idlest_bit), - idlest_val, __clk_get_name(clk->hw.clk)); - } else { - omap_cm_wait_module_ready(0, prcm_mod, idlest_reg_id, - idlest_bit); - }; -} - /* Public functions */ /** @@ -290,279 +112,6 @@ void omap2_init_clk_clkdm(struct clk_hw *hw) } } -/** - * omap2_clk_disable_clkdm_control - disable clkdm control on clk enable/disable - * - * Prevent the OMAP clock code from calling into the clockdomain code - * when a hardware clock in that clockdomain is enabled or disabled. - * Intended to be called at init time from omap*_clk_init(). No - * return value. - */ -void __init omap2_clk_disable_clkdm_control(void) -{ - clkdm_control = false; -} - -/** - * omap2_clk_dflt_find_companion - find companion clock to @clk - * @clk: struct clk * to find the companion clock of - * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in - * @other_bit: u8 ** to return the companion clock bit shift in - * - * Note: We don't need special code here for INVERT_ENABLE for the - * time being since INVERT_ENABLE only applies to clocks enabled by - * CM_CLKEN_PLL - * - * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes it's - * just a matter of XORing the bits. - * - * Some clocks don't have companion clocks. For example, modules with - * only an interface clock (such as MAILBOXES) don't have a companion - * clock. Right now, this code relies on the hardware exporting a bit - * in the correct companion register that indicates that the - * nonexistent 'companion clock' is active. Future patches will - * associate this type of code with per-module data structures to - * avoid this issue, and remove the casts. No return value. - */ -void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk, - void __iomem **other_reg, u8 *other_bit) -{ - u32 r; - - /* - * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes - * it's just a matter of XORing the bits. - */ - r = ((__force u32)clk->enable_reg ^ (CM_FCLKEN ^ CM_ICLKEN)); - - *other_reg = (__force void __iomem *)r; - *other_bit = clk->enable_bit; -} - -/** - * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk - * @clk: struct clk * to find IDLEST info for - * @idlest_reg: void __iomem ** to return the CM_IDLEST va in - * @idlest_bit: u8 * to return the CM_IDLEST bit shift in - * @idlest_val: u8 * to return the idle status indicator - * - * Return the CM_IDLEST register address and bit shift corresponding - * to the module that "owns" this clock. This default code assumes - * that the CM_IDLEST bit shift is the CM_*CLKEN bit shift, and that - * the IDLEST register address ID corresponds to the CM_*CLKEN - * register address ID (e.g., that CM_FCLKEN2 corresponds to - * CM_IDLEST2). This is not true for all modules. No return value. - */ -void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk, - void __iomem **idlest_reg, u8 *idlest_bit, u8 *idlest_val) -{ - u32 r; - - r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); - *idlest_reg = (__force void __iomem *)r; - *idlest_bit = clk->enable_bit; - - /* - * 24xx uses 0 to indicate not ready, and 1 to indicate ready. - * 34xx reverses this, just to keep us on our toes - * AM35xx uses both, depending on the module. - */ - *idlest_val = ti_clk_features.cm_idlest_val; -} - -/** - * omap2_dflt_clk_enable - enable a clock in the hardware - * @hw: struct clk_hw * of the clock to enable - * - * Enable the clock @hw in the hardware. We first call into the OMAP - * clockdomain code to "enable" the corresponding clockdomain if this - * is the first enabled user of the clockdomain. Then program the - * hardware to enable the clock. Then wait for the IP block that uses - * this clock to leave idle (if applicable). Returns the error value - * from clkdm_clk_enable() if it terminated with an error, or -EINVAL - * if @hw has a null clock enable_reg, or zero upon success. - */ -int omap2_dflt_clk_enable(struct clk_hw *hw) -{ - struct clk_hw_omap *clk; - u32 v; - int ret = 0; - - clk = to_clk_hw_omap(hw); - - if (clkdm_control && clk->clkdm) { - ret = clkdm_clk_enable(clk->clkdm, hw->clk); - if (ret) { - WARN(1, "%s: could not enable %s's clockdomain %s: %d\n", - __func__, __clk_get_name(hw->clk), - clk->clkdm->name, ret); - return ret; - } - } - - if (unlikely(clk->enable_reg == NULL)) { - pr_err("%s: %s missing enable_reg\n", __func__, - __clk_get_name(hw->clk)); - ret = -EINVAL; - goto err; - } - - /* FIXME should not have INVERT_ENABLE bit here */ - v = omap2_clk_readl(clk, clk->enable_reg); - if (clk->flags & INVERT_ENABLE) - v &= ~(1 << clk->enable_bit); - else - v |= (1 << clk->enable_bit); - omap2_clk_writel(v, clk, clk->enable_reg); - v = omap2_clk_readl(clk, clk->enable_reg); /* OCP barrier */ - - if (clk->ops && clk->ops->find_idlest) - _omap2_module_wait_ready(clk); - - return 0; - -err: - if (clkdm_control && clk->clkdm) - clkdm_clk_disable(clk->clkdm, hw->clk); - return ret; -} - -/** - * omap2_dflt_clk_disable - disable a clock in the hardware - * @hw: struct clk_hw * of the clock to disable - * - * Disable the clock @hw in the hardware, and call into the OMAP - * clockdomain code to "disable" the corresponding clockdomain if all - * clocks/hwmods in that clockdomain are now disabled. No return - * value. - */ -void omap2_dflt_clk_disable(struct clk_hw *hw) -{ - struct clk_hw_omap *clk; - u32 v; - - clk = to_clk_hw_omap(hw); - if (!clk->enable_reg) { - /* - * 'independent' here refers to a clock which is not - * controlled by its parent. - */ - pr_err("%s: independent clock %s has no enable_reg\n", - __func__, __clk_get_name(hw->clk)); - return; - } - - v = omap2_clk_readl(clk, clk->enable_reg); - if (clk->flags & INVERT_ENABLE) - v |= (1 << clk->enable_bit); - else - v &= ~(1 << clk->enable_bit); - omap2_clk_writel(v, clk, clk->enable_reg); - /* No OCP barrier needed here since it is a disable operation */ - - if (clkdm_control && clk->clkdm) - clkdm_clk_disable(clk->clkdm, hw->clk); -} - -/** - * omap2_clkops_enable_clkdm - increment usecount on clkdm of @hw - * @hw: struct clk_hw * of the clock being enabled - * - * Increment the usecount of the clockdomain of the clock pointed to - * by @hw; if the usecount is 1, the clockdomain will be "enabled." - * Only needed for clocks that don't use omap2_dflt_clk_enable() as - * their enable function pointer. Passes along the return value of - * clkdm_clk_enable(), -EINVAL if @hw is not associated with a - * clockdomain, or 0 if clock framework-based clockdomain control is - * not implemented. - */ -int omap2_clkops_enable_clkdm(struct clk_hw *hw) -{ - struct clk_hw_omap *clk; - int ret = 0; - - clk = to_clk_hw_omap(hw); - - if (unlikely(!clk->clkdm)) { - pr_err("%s: %s: no clkdm set ?!\n", __func__, - __clk_get_name(hw->clk)); - return -EINVAL; - } - - if (unlikely(clk->enable_reg)) - pr_err("%s: %s: should use dflt_clk_enable ?!\n", __func__, - __clk_get_name(hw->clk)); - - if (!clkdm_control) { - pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n", - __func__, __clk_get_name(hw->clk)); - return 0; - } - - ret = clkdm_clk_enable(clk->clkdm, hw->clk); - WARN(ret, "%s: could not enable %s's clockdomain %s: %d\n", - __func__, __clk_get_name(hw->clk), clk->clkdm->name, ret); - - return ret; -} - -/** - * omap2_clkops_disable_clkdm - decrement usecount on clkdm of @hw - * @hw: struct clk_hw * of the clock being disabled - * - * Decrement the usecount of the clockdomain of the clock pointed to - * by @hw; if the usecount is 0, the clockdomain will be "disabled." - * Only needed for clocks that don't use omap2_dflt_clk_disable() as their - * disable function pointer. No return value. - */ -void omap2_clkops_disable_clkdm(struct clk_hw *hw) -{ - struct clk_hw_omap *clk; - - clk = to_clk_hw_omap(hw); - - if (unlikely(!clk->clkdm)) { - pr_err("%s: %s: no clkdm set ?!\n", __func__, - __clk_get_name(hw->clk)); - return; - } - - if (unlikely(clk->enable_reg)) - pr_err("%s: %s: should use dflt_clk_disable ?!\n", __func__, - __clk_get_name(hw->clk)); - - if (!clkdm_control) { - pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n", - __func__, __clk_get_name(hw->clk)); - return; - } - - clkdm_clk_disable(clk->clkdm, hw->clk); -} - -/** - * omap2_dflt_clk_is_enabled - is clock enabled in the hardware? - * @hw: struct clk_hw * to check - * - * Return 1 if the clock represented by @hw is enabled in the - * hardware, or 0 otherwise. Intended for use in the struct - * clk_ops.is_enabled function pointer. - */ -int omap2_dflt_clk_is_enabled(struct clk_hw *hw) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - u32 v; - - v = omap2_clk_readl(clk, clk->enable_reg); - - if (clk->flags & INVERT_ENABLE) - v ^= BIT(clk->enable_bit); - - v &= BIT(clk->enable_bit); - - return v ? 1 : 0; -} - static int __initdata mpurate; /* @@ -584,178 +133,6 @@ static int __init omap_clk_setup(char *str) __setup("mpurate=", omap_clk_setup); /** - * omap2_init_clk_hw_omap_clocks - initialize an OMAP clock - * @clk: struct clk * to initialize - * - * Add an OMAP clock @clk to the internal list of OMAP clocks. Used - * temporarily for autoidle handling, until this support can be - * integrated into the common clock framework code in some way. No - * return value. - */ -void omap2_init_clk_hw_omap_clocks(struct clk *clk) -{ - struct clk_hw_omap *c; - - if (__clk_get_flags(clk) & CLK_IS_BASIC) - return; - - c = to_clk_hw_omap(__clk_get_hw(clk)); - list_add(&c->node, &clk_hw_omap_clocks); -} - -/** - * omap2_clk_enable_autoidle_all - enable autoidle on all OMAP clocks that - * support it - * - * Enable clock autoidle on all OMAP clocks that have allow_idle - * function pointers associated with them. This function is intended - * to be temporary until support for this is added to the common clock - * code. Returns 0. - */ -int omap2_clk_enable_autoidle_all(void) -{ - struct clk_hw_omap *c; - - list_for_each_entry(c, &clk_hw_omap_clocks, node) - if (c->ops && c->ops->allow_idle) - c->ops->allow_idle(c); - - of_ti_clk_allow_autoidle_all(); - - return 0; -} - -/** - * omap2_clk_disable_autoidle_all - disable autoidle on all OMAP clocks that - * support it - * - * Disable clock autoidle on all OMAP clocks that have allow_idle - * function pointers associated with them. This function is intended - * to be temporary until support for this is added to the common clock - * code. Returns 0. - */ -int omap2_clk_disable_autoidle_all(void) -{ - struct clk_hw_omap *c; - - list_for_each_entry(c, &clk_hw_omap_clocks, node) - if (c->ops && c->ops->deny_idle) - c->ops->deny_idle(c); - - of_ti_clk_deny_autoidle_all(); - - return 0; -} - -/** - * omap2_clk_deny_idle - disable autoidle on an OMAP clock - * @clk: struct clk * to disable autoidle for - * - * Disable autoidle on an OMAP clock. - */ -int omap2_clk_deny_idle(struct clk *clk) -{ - struct clk_hw_omap *c; - - if (__clk_get_flags(clk) & CLK_IS_BASIC) - return -EINVAL; - - c = to_clk_hw_omap(__clk_get_hw(clk)); - if (c->ops && c->ops->deny_idle) - c->ops->deny_idle(c); - return 0; -} - -/** - * omap2_clk_allow_idle - enable autoidle on an OMAP clock - * @clk: struct clk * to enable autoidle for - * - * Enable autoidle on an OMAP clock. - */ -int omap2_clk_allow_idle(struct clk *clk) -{ - struct clk_hw_omap *c; - - if (__clk_get_flags(clk) & CLK_IS_BASIC) - return -EINVAL; - - c = to_clk_hw_omap(__clk_get_hw(clk)); - if (c->ops && c->ops->allow_idle) - c->ops->allow_idle(c); - return 0; -} - -/** - * omap2_clk_enable_init_clocks - prepare & enable a list of clocks - * @clk_names: ptr to an array of strings of clock names to enable - * @num_clocks: number of clock names in @clk_names - * - * Prepare and enable a list of clocks, named by @clk_names. No - * return value. XXX Deprecated; only needed until these clocks are - * properly claimed and enabled by the drivers or core code that uses - * them. XXX What code disables & calls clk_put on these clocks? - */ -void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks) -{ - struct clk *init_clk; - int i; - - for (i = 0; i < num_clocks; i++) { - init_clk = clk_get(NULL, clk_names[i]); - if (WARN(IS_ERR(init_clk), "could not find init clock %s\n", - clk_names[i])) - continue; - clk_prepare_enable(init_clk); - } -} - -const struct clk_hw_omap_ops clkhwops_wait = { - .find_idlest = omap2_clk_dflt_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; - -/** - * omap2_clk_switch_mpurate_at_boot - switch ARM MPU rate by boot-time argument - * @mpurate_ck_name: clk name of the clock to change rate - * - * Change the ARM MPU clock rate to the rate specified on the command - * line, if one was specified. @mpurate_ck_name should be - * "virt_prcm_set" on OMAP2xxx and "dpll1_ck" on OMAP34xx/OMAP36xx. - * XXX Does not handle voltage scaling - on OMAP2xxx this is currently - * handled by the virt_prcm_set clock, but this should be handled by - * the OPP layer. XXX This is intended to be handled by the OPP layer - * code in the near future and should be removed from the clock code. - * Returns -EINVAL if 'mpurate' is zero or if clk_set_rate() rejects - * the rate, -ENOENT if the struct clk referred to by @mpurate_ck_name - * cannot be found, or 0 upon success. - */ -int __init omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name) -{ - struct clk *mpurate_ck; - int r; - - if (!mpurate) - return -EINVAL; - - mpurate_ck = clk_get(NULL, mpurate_ck_name); - if (WARN(IS_ERR(mpurate_ck), "Failed to get %s.\n", mpurate_ck_name)) - return -ENOENT; - - r = clk_set_rate(mpurate_ck, mpurate); - if (r < 0) { - WARN(1, "clock: %s: unable to set MPU rate to %d: %d\n", - mpurate_ck_name, mpurate, r); - clk_put(mpurate_ck); - return -EINVAL; - } - - calibrate_delay(); - clk_put(mpurate_ck); - - return 0; -} - -/** * omap2_clk_print_new_rates - print summary of current clock tree rates * @hfclkin_ck_name: clk name for the off-chip HF oscillator * @core_ck_name: clk name for the on-chip CORE_CLK @@ -801,29 +178,30 @@ void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name, */ void __init ti_clk_init_features(void) { + struct ti_clk_features features = { 0 }; /* Fint setup for DPLLs */ if (cpu_is_omap3430()) { - ti_clk_features.fint_min = OMAP3430_DPLL_FINT_BAND1_MIN; - ti_clk_features.fint_max = OMAP3430_DPLL_FINT_BAND2_MAX; - ti_clk_features.fint_band1_max = OMAP3430_DPLL_FINT_BAND1_MAX; - ti_clk_features.fint_band2_min = OMAP3430_DPLL_FINT_BAND2_MIN; + features.fint_min = OMAP3430_DPLL_FINT_BAND1_MIN; + features.fint_max = OMAP3430_DPLL_FINT_BAND2_MAX; + features.fint_band1_max = OMAP3430_DPLL_FINT_BAND1_MAX; + features.fint_band2_min = OMAP3430_DPLL_FINT_BAND2_MIN; } else { - ti_clk_features.fint_min = OMAP3PLUS_DPLL_FINT_MIN; - ti_clk_features.fint_max = OMAP3PLUS_DPLL_FINT_MAX; + features.fint_min = OMAP3PLUS_DPLL_FINT_MIN; + features.fint_max = OMAP3PLUS_DPLL_FINT_MAX; } /* Bypass value setup for DPLLs */ if (cpu_is_omap24xx()) { - ti_clk_features.dpll_bypass_vals |= + features.dpll_bypass_vals |= (1 << OMAP2XXX_EN_DPLL_LPBYPASS) | (1 << OMAP2XXX_EN_DPLL_FRBYPASS); } else if (cpu_is_omap34xx()) { - ti_clk_features.dpll_bypass_vals |= + features.dpll_bypass_vals |= (1 << OMAP3XXX_EN_DPLL_LPBYPASS) | (1 << OMAP3XXX_EN_DPLL_FRBYPASS); } else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx() || soc_is_omap54xx() || soc_is_dra7xx()) { - ti_clk_features.dpll_bypass_vals |= + features.dpll_bypass_vals |= (1 << OMAP4XXX_EN_DPLL_LPBYPASS) | (1 << OMAP4XXX_EN_DPLL_FRBYPASS) | (1 << OMAP4XXX_EN_DPLL_MNBYPASS); @@ -831,7 +209,7 @@ void __init ti_clk_init_features(void) /* Jitter correction only available on OMAP343X */ if (cpu_is_omap343x()) - ti_clk_features.flags |= TI_CLK_DPLL_HAS_FREQSEL; + features.flags |= TI_CLK_DPLL_HAS_FREQSEL; /* Idlest value for interface clocks. * 24xx uses 0 to indicate not ready, and 1 to indicate ready. @@ -839,11 +217,13 @@ void __init ti_clk_init_features(void) * AM35xx uses both, depending on the module. */ if (cpu_is_omap24xx()) - ti_clk_features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL; + features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL; else if (cpu_is_omap34xx()) - ti_clk_features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL; + features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL; /* On OMAP3430 ES1.0, DPLL4 can't be re-programmed */ if (omap_rev() == OMAP3430_REV_ES1_0) - ti_clk_features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM; + features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM; + + ti_clk_setup_features(&features); } diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 652ed0ab86ec..67da640ba1c7 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -23,90 +23,6 @@ #include <linux/clk-provider.h> #include <linux/clk/ti.h> -struct omap_clk { - u16 cpu; - struct clk_lookup lk; -}; - -#define CLK(dev, con, ck) \ - { \ - .lk = { \ - .dev_id = dev, \ - .con_id = con, \ - .clk = ck, \ - }, \ - } - -struct clockdomain; - -#define DEFINE_STRUCT_CLK(_name, _parent_array_name, _clkops_name) \ - static struct clk_core _name##_core = { \ - .name = #_name, \ - .hw = &_name##_hw.hw, \ - .parent_names = _parent_array_name, \ - .num_parents = ARRAY_SIZE(_parent_array_name), \ - .ops = &_clkops_name, \ - }; \ - static struct clk _name = { \ - .core = &_name##_core, \ - }; - -#define DEFINE_STRUCT_CLK_FLAGS(_name, _parent_array_name, \ - _clkops_name, _flags) \ - static struct clk_core _name##_core = { \ - .name = #_name, \ - .hw = &_name##_hw.hw, \ - .parent_names = _parent_array_name, \ - .num_parents = ARRAY_SIZE(_parent_array_name), \ - .ops = &_clkops_name, \ - .flags = _flags, \ - }; \ - static struct clk _name = { \ - .core = &_name##_core, \ - }; - -#define DEFINE_STRUCT_CLK_HW_OMAP(_name, _clkdm_name) \ - static struct clk_hw_omap _name##_hw = { \ - .hw = { \ - .clk = &_name, \ - }, \ - .clkdm_name = _clkdm_name, \ - }; - -#define DEFINE_CLK_OMAP_MUX(_name, _clkdm_name, _clksel, \ - _clksel_reg, _clksel_mask, \ - _parent_names, _ops) \ - static struct clk _name; \ - static struct clk_hw_omap _name##_hw = { \ - .hw = { \ - .clk = &_name, \ - }, \ - .clksel = _clksel, \ - .clksel_reg = _clksel_reg, \ - .clksel_mask = _clksel_mask, \ - .clkdm_name = _clkdm_name, \ - }; \ - DEFINE_STRUCT_CLK(_name, _parent_names, _ops); - -#define DEFINE_CLK_OMAP_MUX_GATE(_name, _clkdm_name, _clksel, \ - _clksel_reg, _clksel_mask, \ - _enable_reg, _enable_bit, \ - _hwops, _parent_names, _ops) \ - static struct clk _name; \ - static struct clk_hw_omap _name##_hw = { \ - .hw = { \ - .clk = &_name, \ - }, \ - .ops = _hwops, \ - .enable_reg = _enable_reg, \ - .enable_bit = _enable_bit, \ - .clksel = _clksel, \ - .clksel_reg = _clksel_reg, \ - .clksel_mask = _clksel_mask, \ - .clkdm_name = _clkdm_name, \ - }; \ - DEFINE_STRUCT_CLK(_name, _parent_names, _ops); - /* struct clksel_rate.flags possibilities */ #define RATE_IN_242X (1 << 0) #define RATE_IN_243X (1 << 1) @@ -127,38 +43,6 @@ struct clockdomain; /* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */ #define RATE_IN_3430ES2PLUS_36XX (RATE_IN_3430ES2PLUS | RATE_IN_36XX) - -/** - * struct clksel_rate - register bitfield values corresponding to clk divisors - * @val: register bitfield value (shifted to bit 0) - * @div: clock divisor corresponding to @val - * @flags: (see "struct clksel_rate.flags possibilities" above) - * - * @val should match the value of a read from struct clk.clksel_reg - * AND'ed with struct clk.clksel_mask, shifted right to bit 0. - * - * @div is the divisor that should be applied to the parent clock's rate - * to produce the current clock's rate. - */ -struct clksel_rate { - u32 val; - u8 div; - u16 flags; -}; - -/** - * struct clksel - available parent clocks, and a pointer to their divisors - * @parent: struct clk * to a possible parent clock - * @rates: available divisors for this parent clock - * - * A struct clksel is always associated with one or more struct clks - * and one or more struct clksel_rates. - */ -struct clksel { - struct clk *parent; - const struct clksel_rate *rates; -}; - /* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */ #define CORE_CLK_SRC_32K 0x0 #define CORE_CLK_SRC_DPLL 0x1 @@ -180,105 +64,18 @@ struct clksel { #define OMAP4XXX_EN_DPLL_FRBYPASS 0x6 #define OMAP4XXX_EN_DPLL_LOCKED 0x7 -u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk); -void omap3_dpll_allow_idle(struct clk_hw_omap *clk); -void omap3_dpll_deny_idle(struct clk_hw_omap *clk); -void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk); -void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk); - -void __init omap2_clk_disable_clkdm_control(void); - -/* clkt_clksel.c public functions */ -u32 omap2_clksel_round_rate_div(struct clk_hw_omap *clk, - unsigned long target_rate, - u32 *new_div); -u8 omap2_clksel_find_parent_index(struct clk_hw *hw); -unsigned long omap2_clksel_recalc(struct clk_hw *hw, unsigned long parent_rate); -long omap2_clksel_round_rate(struct clk_hw *hw, unsigned long target_rate, - unsigned long *parent_rate); -int omap2_clksel_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate); -int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val); - -/* clkt_iclk.c public functions */ -extern void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk); -extern void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk); - -unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk); - -void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk, - void __iomem **other_reg, - u8 *other_bit); -void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk, - void __iomem **idlest_reg, - u8 *idlest_bit, u8 *idlest_val); -int omap2_clk_enable_autoidle_all(void); -int omap2_clk_allow_idle(struct clk *clk); -int omap2_clk_deny_idle(struct clk *clk); -int omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name); void omap2_clk_print_new_rates(const char *hfclkin_ck_name, const char *core_ck_name, const char *mpu_ck_name); -u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg); -void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg); - extern u16 cpu_mask; -/* - * Clock features setup. Used instead of CPU type checks. - */ -struct ti_clk_features { - u32 flags; - long fint_min; - long fint_max; - long fint_band1_max; - long fint_band2_min; - u8 dpll_bypass_vals; - u8 cm_idlest_val; -}; - -#define TI_CLK_DPLL_HAS_FREQSEL (1 << 0) -#define TI_CLK_DPLL4_DENY_REPROGRAM (1 << 1) - -extern struct ti_clk_features ti_clk_features; - extern const struct clkops clkops_omap2_dflt_wait; extern const struct clkops clkops_omap2_dflt; extern struct clk_functions omap2_clk_functions; -extern const struct clksel_rate gpt_32k_rates[]; -extern const struct clksel_rate gpt_sys_rates[]; -extern const struct clksel_rate gfx_l3_rates[]; -extern const struct clksel_rate dsp_ick_rates[]; - -extern const struct clk_hw_omap_ops clkhwops_iclk_wait; -extern const struct clk_hw_omap_ops clkhwops_wait; -extern const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait; -extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait; -extern const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait; -extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait; -extern const struct clk_hw_omap_ops clkhwops_apll54; -extern const struct clk_hw_omap_ops clkhwops_apll96; - -/* clksel_rate blocks shared between OMAP44xx and AM33xx */ -extern const struct clksel_rate div_1_0_rates[]; -extern const struct clksel_rate div3_1to4_rates[]; -extern const struct clksel_rate div_1_1_rates[]; -extern const struct clksel_rate div_1_2_rates[]; -extern const struct clksel_rate div_1_3_rates[]; -extern const struct clksel_rate div_1_4_rates[]; -extern const struct clksel_rate div31_1to31_rates[]; - -extern int omap2_clkops_enable_clkdm(struct clk_hw *hw); -extern void omap2_clkops_disable_clkdm(struct clk_hw *hw); - -struct regmap; - -int __init omap2_clk_provider_init(struct device_node *np, int index, - struct regmap *syscon, void __iomem *mem); -void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem); +int __init omap2_clk_setup_ll_ops(void); void __init ti_clk_init_features(void); #endif diff --git a/arch/arm/mach-omap2/clock2430.c b/arch/arm/mach-omap2/clock2430.c deleted file mode 100644 index cef0c8d1de52..000000000000 --- a/arch/arm/mach-omap2/clock2430.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * clock2430.c - OMAP2430-specific clock integration code - * - * Copyright (C) 2005-2008 Texas Instruments, Inc. - * Copyright (C) 2004-2010 Nokia Corporation - * - * Contacts: - * Richard Woodruff <r-woodruff2@ti.com> - * Paul Walmsley - * - * Based on earlier work by Tuukka Tikkanen, Tony Lindgren, - * Gordon McNutt and RidgeRun, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#undef DEBUG - -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include "soc.h" -#include "iomap.h" -#include "clock.h" -#include "clock2xxx.h" -#include "cm2xxx.h" -#include "cm-regbits-24xx.h" - -/** - * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS - * @clk: struct clk * being enabled - * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into - * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into - * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator - * - * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the - * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE. This custom function - * passes back the correct CM_IDLEST register address for I2CHS - * modules. No return value. - */ -static void omap2430_clk_i2chs_find_idlest(struct clk_hw_omap *clk, - void __iomem **idlest_reg, - u8 *idlest_bit, - u8 *idlest_val) -{ - *idlest_reg = OMAP2430_CM_REGADDR(CORE_MOD, CM_IDLEST); - *idlest_bit = clk->enable_bit; - *idlest_val = OMAP24XX_CM_IDLEST_VAL; -} - -/* 2430 I2CHS has non-standard IDLEST register */ -const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait = { - .find_idlest = omap2430_clk_i2chs_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c deleted file mode 100644 index b870f6a9e283..000000000000 --- a/arch/arm/mach-omap2/clock2xxx.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * clock2xxx.c - OMAP2xxx-specific clock integration code - * - * Copyright (C) 2005-2008 Texas Instruments, Inc. - * Copyright (C) 2004-2010 Nokia Corporation - * - * Contacts: - * Richard Woodruff <r-woodruff2@ti.com> - * Paul Walmsley - * - * Based on earlier work by Tuukka Tikkanen, Tony Lindgren, - * Gordon McNutt and RidgeRun, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#undef DEBUG - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include "soc.h" -#include "clock.h" -#include "clock2xxx.h" -#include "cm.h" -#include "cm-regbits-24xx.h" - -struct clk_hw *dclk_hw; -/* - * Omap24xx specific clock functions - */ - -/* - * Switch the MPU rate if specified on cmdline. We cannot do this - * early until cmdline is parsed. XXX This should be removed from the - * clock code and handled by the OPP layer code in the near future. - */ -static int __init omap2xxx_clk_arch_init(void) -{ - int ret; - - if (!cpu_is_omap24xx()) - return 0; - - ret = omap2_clk_switch_mpurate_at_boot("virt_prcm_set"); - if (!ret) - omap2_clk_print_new_rates("sys_ck", "dpll_ck", "mpu_ck"); - - return ret; -} - -omap_arch_initcall(omap2xxx_clk_arch_init); - - diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c deleted file mode 100644 index 4596468e50ab..000000000000 --- a/arch/arm/mach-omap2/clock34xx.c +++ /dev/null @@ -1,138 +0,0 @@ -/* - * OMAP3-specific clock framework functions - * - * Copyright (C) 2007-2008 Texas Instruments, Inc. - * Copyright (C) 2007-2011 Nokia Corporation - * - * Paul Walmsley - * Jouni Högander - * - * Parts of this code are based on code written by - * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu, - * Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#undef DEBUG - -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include "clock.h" -#include "clock34xx.h" -#include "cm3xxx.h" -#include "cm-regbits-34xx.h" - -/** - * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI - * @clk: struct clk * being enabled - * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into - * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into - * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator - * - * The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift - * from the CM_{I,F}CLKEN bit. Pass back the correct info via - * @idlest_reg and @idlest_bit. No return value. - */ -static void omap3430es2_clk_ssi_find_idlest(struct clk_hw_omap *clk, - void __iomem **idlest_reg, - u8 *idlest_bit, - u8 *idlest_val) -{ - u32 r; - - r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); - *idlest_reg = (__force void __iomem *)r; - *idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT; - *idlest_val = OMAP34XX_CM_IDLEST_VAL; -} -const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait = { - .find_idlest = omap3430es2_clk_ssi_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; - -const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait = { - .allow_idle = omap2_clkt_iclk_allow_idle, - .deny_idle = omap2_clkt_iclk_deny_idle, - .find_idlest = omap3430es2_clk_ssi_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; - -/** - * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST - * @clk: struct clk * being enabled - * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into - * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into - * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator - * - * Some OMAP modules on OMAP3 ES2+ chips have both initiator and - * target IDLEST bits. For our purposes, we are concerned with the - * target IDLEST bits, which exist at a different bit position than - * the *CLKEN bit position for these modules (DSS and USBHOST) (The - * default find_idlest code assumes that they are at the same - * position.) No return value. - */ -static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk_hw_omap *clk, - void __iomem **idlest_reg, - u8 *idlest_bit, - u8 *idlest_val) -{ - u32 r; - - r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); - *idlest_reg = (__force void __iomem *)r; - /* USBHOST_IDLE has same shift */ - *idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT; - *idlest_val = OMAP34XX_CM_IDLEST_VAL; -} - -const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait = { - .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; - -const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait = { - .allow_idle = omap2_clkt_iclk_allow_idle, - .deny_idle = omap2_clkt_iclk_deny_idle, - .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; - -/** - * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB - * @clk: struct clk * being enabled - * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into - * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into - * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator - * - * The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different - * shift from the CM_{I,F}CLKEN bit. Pass back the correct info via - * @idlest_reg and @idlest_bit. No return value. - */ -static void omap3430es2_clk_hsotgusb_find_idlest(struct clk_hw_omap *clk, - void __iomem **idlest_reg, - u8 *idlest_bit, - u8 *idlest_val) -{ - u32 r; - - r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); - *idlest_reg = (__force void __iomem *)r; - *idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT; - *idlest_val = OMAP34XX_CM_IDLEST_VAL; -} - -const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait = { - .allow_idle = omap2_clkt_iclk_allow_idle, - .deny_idle = omap2_clkt_iclk_deny_idle, - .find_idlest = omap3430es2_clk_hsotgusb_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; - -const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait = { - .find_idlest = omap3430es2_clk_hsotgusb_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h deleted file mode 100644 index 084ba71b2b31..000000000000 --- a/arch/arm/mach-omap2/clock34xx.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * OMAP34xx clock function prototypes and macros - * - * Copyright (C) 2007-2010 Texas Instruments, Inc. - * Copyright (C) 2007-2011 Nokia Corporation - */ - -#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H -#define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H - -extern const struct clkops clkops_omap3430es2_ssi_wait; -extern const struct clkops clkops_omap3430es2_iclk_ssi_wait; -extern const struct clkops clkops_omap3430es2_hsotgusb_wait; -extern const struct clkops clkops_omap3430es2_iclk_hsotgusb_wait; -extern const struct clkops clkops_omap3430es2_dss_usbhost_wait; -extern const struct clkops clkops_omap3430es2_iclk_dss_usbhost_wait; - -#endif diff --git a/arch/arm/mach-omap2/clock3517.c b/arch/arm/mach-omap2/clock3517.c deleted file mode 100644 index 4d79ae2c0241..000000000000 --- a/arch/arm/mach-omap2/clock3517.c +++ /dev/null @@ -1,118 +0,0 @@ -/* - * OMAP3517/3505-specific clock framework functions - * - * Copyright (C) 2010 Texas Instruments, Inc. - * Copyright (C) 2011 Nokia Corporation - * - * Ranjith Lohithakshan - * Paul Walmsley - * - * Parts of this code are based on code written by - * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu, - * Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#undef DEBUG - -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include "clock.h" -#include "clock3517.h" -#include "cm3xxx.h" -#include "cm-regbits-34xx.h" - -/* - * In AM35xx IPSS, the {ICK,FCK} enable bits for modules are exported - * in the same register at a bit offset of 0x8. The EN_ACK for ICK is - * at an offset of 4 from ICK enable bit. - */ -#define AM35XX_IPSS_ICK_MASK 0xF -#define AM35XX_IPSS_ICK_EN_ACK_OFFSET 0x4 -#define AM35XX_IPSS_ICK_FCK_OFFSET 0x8 -#define AM35XX_IPSS_CLK_IDLEST_VAL 0 - -/** - * am35xx_clk_find_idlest - return clock ACK info for AM35XX IPSS - * @clk: struct clk * being enabled - * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into - * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into - * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator - * - * The interface clocks on AM35xx IPSS reflects the clock idle status - * in the enable register itsel at a bit offset of 4 from the enable - * bit. A value of 1 indicates that clock is enabled. - */ -static void am35xx_clk_find_idlest(struct clk_hw_omap *clk, - void __iomem **idlest_reg, - u8 *idlest_bit, - u8 *idlest_val) -{ - *idlest_reg = (__force void __iomem *)(clk->enable_reg); - *idlest_bit = clk->enable_bit + AM35XX_IPSS_ICK_EN_ACK_OFFSET; - *idlest_val = AM35XX_IPSS_CLK_IDLEST_VAL; -} - -/** - * am35xx_clk_find_companion - find companion clock to @clk - * @clk: struct clk * to find the companion clock of - * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in - * @other_bit: u8 ** to return the companion clock bit shift in - * - * Some clocks don't have companion clocks. For example, modules with - * only an interface clock (such as HECC) don't have a companion - * clock. Right now, this code relies on the hardware exporting a bit - * in the correct companion register that indicates that the - * nonexistent 'companion clock' is active. Future patches will - * associate this type of code with per-module data structures to - * avoid this issue, and remove the casts. No return value. - */ -static void am35xx_clk_find_companion(struct clk_hw_omap *clk, - void __iomem **other_reg, - u8 *other_bit) -{ - *other_reg = (__force void __iomem *)(clk->enable_reg); - if (clk->enable_bit & AM35XX_IPSS_ICK_MASK) - *other_bit = clk->enable_bit + AM35XX_IPSS_ICK_FCK_OFFSET; - else - *other_bit = clk->enable_bit - AM35XX_IPSS_ICK_FCK_OFFSET; -} -const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait = { - .find_idlest = am35xx_clk_find_idlest, - .find_companion = am35xx_clk_find_companion, -}; - -/** - * am35xx_clk_ipss_find_idlest - return CM_IDLEST info for IPSS - * @clk: struct clk * being enabled - * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into - * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into - * @idlest_val: pointer to a u8 to store the CM_IDLEST indicator - * - * The IPSS target CM_IDLEST bit is at a different shift from the - * CM_{I,F}CLKEN bit. Pass back the correct info via @idlest_reg - * and @idlest_bit. No return value. - */ -static void am35xx_clk_ipss_find_idlest(struct clk_hw_omap *clk, - void __iomem **idlest_reg, - u8 *idlest_bit, - u8 *idlest_val) -{ - u32 r; - - r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); - *idlest_reg = (__force void __iomem *)r; - *idlest_bit = AM35XX_ST_IPSS_SHIFT; - *idlest_val = OMAP34XX_CM_IDLEST_VAL; -} - -const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait = { - .allow_idle = omap2_clkt_iclk_allow_idle, - .deny_idle = omap2_clkt_iclk_deny_idle, - .find_idlest = am35xx_clk_ipss_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; diff --git a/arch/arm/mach-omap2/clock3517.h b/arch/arm/mach-omap2/clock3517.h deleted file mode 100644 index ca5e5a64c2e2..000000000000 --- a/arch/arm/mach-omap2/clock3517.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * OMAP3517/3505 clock function prototypes and macros - * - * Copyright (C) 2010 Texas Instruments, Inc. - * Copyright (C) 2010 Nokia Corporation - */ - -#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK3517_H -#define __ARCH_ARM_MACH_OMAP2_CLOCK3517_H - -extern const struct clkops clkops_am35xx_ipss_module_wait; -extern const struct clkops clkops_am35xx_ipss_wait; - -#endif diff --git a/arch/arm/mach-omap2/clock36xx.c b/arch/arm/mach-omap2/clock36xx.c deleted file mode 100644 index 91ccb962e09e..000000000000 --- a/arch/arm/mach-omap2/clock36xx.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * OMAP36xx-specific clkops - * - * Copyright (C) 2010 Texas Instruments, Inc. - * Copyright (C) 2010 Nokia Corporation - * - * Mike Turquette - * Vijaykumar GN - * Paul Walmsley - * - * Parts of this code are based on code written by - * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu, - * Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#undef DEBUG - -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/clk-provider.h> -#include <linux/io.h> - -#include "clock.h" -#include "clock36xx.h" -#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw) - -/** - * omap36xx_pwrdn_clk_enable_with_hsdiv_restore - enable clocks suffering - * from HSDivider PWRDN problem Implements Errata ID: i556. - * @clk: DPLL output struct clk - * - * 3630 only: dpll3_m3_ck, dpll4_m2_ck, dpll4_m3_ck, dpll4_m4_ck, - * dpll4_m5_ck & dpll4_m6_ck dividers gets loaded with reset - * valueafter their respective PWRDN bits are set. Any dummy write - * (Any other value different from the Read value) to the - * corresponding CM_CLKSEL register will refresh the dividers. - */ -int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *clk) -{ - struct clk_divider *parent; - struct clk_hw *parent_hw; - u32 dummy_v, orig_v; - struct clk_hw_omap *omap_clk = to_clk_hw_omap(clk); - int ret; - - /* Clear PWRDN bit of HSDIVIDER */ - ret = omap2_dflt_clk_enable(clk); - - parent_hw = __clk_get_hw(__clk_get_parent(clk->clk)); - parent = to_clk_divider(parent_hw); - - /* Restore the dividers */ - if (!ret) { - orig_v = omap2_clk_readl(omap_clk, parent->reg); - dummy_v = orig_v; - - /* Write any other value different from the Read value */ - dummy_v ^= (1 << parent->shift); - omap2_clk_writel(dummy_v, omap_clk, parent->reg); - - /* Write the original divider */ - omap2_clk_writel(orig_v, omap_clk, parent->reg); - } - - return ret; -} diff --git a/arch/arm/mach-omap2/clock36xx.h b/arch/arm/mach-omap2/clock36xx.h deleted file mode 100644 index 945bb7f083e9..000000000000 --- a/arch/arm/mach-omap2/clock36xx.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * OMAP36xx clock function prototypes and macros - * - * Copyright (C) 2010 Texas Instruments, Inc. - * Copyright (C) 2010 Nokia Corporation - */ - -#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK36XX_H -#define __ARCH_ARM_MACH_OMAP2_CLOCK36XX_H - -extern int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *hw); - -#endif diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c deleted file mode 100644 index a9e86db5daf9..000000000000 --- a/arch/arm/mach-omap2/clock3xxx.c +++ /dev/null @@ -1,135 +0,0 @@ -/* - * OMAP3-specific clock framework functions - * - * Copyright (C) 2007-2008 Texas Instruments, Inc. - * Copyright (C) 2007-2010 Nokia Corporation - * - * Paul Walmsley - * Jouni Högander - * - * Parts of this code are based on code written by - * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#undef DEBUG - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include "soc.h" -#include "clock.h" -#include "clock3xxx.h" -#include "prm2xxx_3xxx.h" -#include "prm-regbits-34xx.h" -#include "cm2xxx_3xxx.h" -#include "cm-regbits-34xx.h" - -/* - * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks - * that are sourced by DPLL5, and both of these require this clock - * to be at 120 MHz for proper operation. - */ -#define DPLL5_FREQ_FOR_USBHOST 120000000 - -/* needed by omap3_core_dpll_m2_set_rate() */ -struct clk *sdrc_ick_p, *arm_fck_p; - -/** - * omap3_dpll4_set_rate - set rate for omap3 per-dpll - * @hw: clock to change - * @rate: target rate for clock - * @parent_rate: rate of the parent clock - * - * Check if the current SoC supports the per-dpll reprogram operation - * or not, and then do the rate change if supported. Returns -EINVAL - * if not supported, 0 for success, and potential error codes from the - * clock rate change. - */ -int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - /* - * According to the 12-5 CDP code from TI, "Limitation 2.5" - * on 3430ES1 prevents us from changing DPLL multipliers or dividers - * on DPLL4. - */ - if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) { - pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n"); - return -EINVAL; - } - - return omap3_noncore_dpll_set_rate(hw, rate, parent_rate); -} - -/** - * omap3_dpll4_set_rate_and_parent - set rate and parent for omap3 per-dpll - * @hw: clock to change - * @rate: target rate for clock - * @parent_rate: rate of the parent clock - * @index: parent index, 0 - reference clock, 1 - bypass clock - * - * Check if the current SoC support the per-dpll reprogram operation - * or not, and then do the rate + parent change if supported. Returns - * -EINVAL if not supported, 0 for success, and potential error codes - * from the clock rate change. - */ -int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate, u8 index) -{ - if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) { - pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n"); - return -EINVAL; - } - - return omap3_noncore_dpll_set_rate_and_parent(hw, rate, parent_rate, - index); -} - -void __init omap3_clk_lock_dpll5(void) -{ - struct clk *dpll5_clk; - struct clk *dpll5_m2_clk; - - dpll5_clk = clk_get(NULL, "dpll5_ck"); - clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST); - clk_prepare_enable(dpll5_clk); - - /* Program dpll5_m2_clk divider for no division */ - dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck"); - clk_prepare_enable(dpll5_m2_clk); - clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST); - - clk_disable_unprepare(dpll5_m2_clk); - clk_disable_unprepare(dpll5_clk); - return; -} - -/* Common clock code */ - -/* - * Switch the MPU rate if specified on cmdline. We cannot do this - * early until cmdline is parsed. XXX This should be removed from the - * clock code and handled by the OPP layer code in the near future. - */ -static int __init omap3xxx_clk_arch_init(void) -{ - int ret; - - if (!cpu_is_omap34xx()) - return 0; - - ret = omap2_clk_switch_mpurate_at_boot("dpll1_ck"); - if (!ret) - omap2_clk_print_new_rates("osc_sys_ck", "core_ck", "arm_fck"); - - return ret; -} - -omap_arch_initcall(omap3xxx_clk_arch_init); - - diff --git a/arch/arm/mach-omap2/clock44xx.h b/arch/arm/mach-omap2/clock44xx.h deleted file mode 100644 index 287a46f78d97..000000000000 --- a/arch/arm/mach-omap2/clock44xx.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * OMAP4 clock function prototypes and macros - * - * Copyright (C) 2009 Texas Instruments, Inc. - * Copyright (C) 2010 Nokia Corporation - */ - -#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H -#define __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H - -/* - * OMAP4430_REGM4XEN_MULT: If the CM_CLKMODE_DPLL_ABE.DPLL_REGM4XEN bit is - * set, then the DPLL's lock frequency is multiplied by 4 (OMAP4430 TRM - * vV Section 3.6.3.3.1 "DPLLs Output Clocks Parameters") - */ -#define OMAP4430_REGM4XEN_MULT 4 - -int omap4xxx_clk_init(void); - -#endif diff --git a/arch/arm/mach-omap2/clock_common_data.c b/arch/arm/mach-omap2/clock_common_data.c deleted file mode 100644 index 61b60dfb14ce..000000000000 --- a/arch/arm/mach-omap2/clock_common_data.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/clock_common_data.c - * - * Copyright (C) 2005-2009 Texas Instruments, Inc. - * Copyright (C) 2004-2009 Nokia Corporation - * - * Contacts: - * Richard Woodruff <r-woodruff2@ti.com> - * Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This file contains clock data that is common to both the OMAP2xxx and - * OMAP3xxx clock definition files. - */ - -#include "clock.h" - -/* clksel_rate data common to 24xx/343x */ -const struct clksel_rate gpt_32k_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_3XXX }, - { .div = 0 } -}; - -const struct clksel_rate gpt_sys_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_3XXX }, - { .div = 0 } -}; - -const struct clksel_rate gfx_l3_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_3XXX }, - { .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_3XXX }, - { .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_3XXX }, - { .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_3XXX }, - { .div = 0 } -}; - -const struct clksel_rate dsp_ick_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX }, - { .div = 2, .val = 2, .flags = RATE_IN_24XX }, - { .div = 3, .val = 3, .flags = RATE_IN_243X }, - { .div = 0 }, -}; - - -/* clksel_rate blocks shared between OMAP44xx and AM33xx */ - -const struct clksel_rate div_1_0_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 0 }, -}; - -const struct clksel_rate div3_1to4_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_4430 }, - { .div = 2, .val = 1, .flags = RATE_IN_4430 }, - { .div = 4, .val = 2, .flags = RATE_IN_4430 }, - { .div = 0 }, -}; - -const struct clksel_rate div_1_1_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 0 }, -}; - -const struct clksel_rate div_1_2_rates[] = { - { .div = 1, .val = 2, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 0 }, -}; - -const struct clksel_rate div_1_3_rates[] = { - { .div = 1, .val = 3, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 0 }, -}; - -const struct clksel_rate div_1_4_rates[] = { - { .div = 1, .val = 4, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 0 }, -}; - -const struct clksel_rate div31_1to31_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 2, .val = 2, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 3, .val = 3, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 4, .val = 4, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 5, .val = 5, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 6, .val = 6, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 7, .val = 7, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 8, .val = 8, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 9, .val = 9, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 10, .val = 10, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 11, .val = 11, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 12, .val = 12, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 13, .val = 13, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 14, .val = 14, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 15, .val = 15, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 16, .val = 16, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 17, .val = 17, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 18, .val = 18, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 19, .val = 19, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 20, .val = 20, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 21, .val = 21, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 22, .val = 22, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 23, .val = 23, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 24, .val = 24, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 25, .val = 25, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 26, .val = 26, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 27, .val = 27, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 28, .val = 28, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 29, .val = 29, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 30, .val = 30, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 31, .val = 31, .flags = RATE_IN_4430 | RATE_IN_AM33XX }, - { .div = 0 }, -}; diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c deleted file mode 100644 index 44e57ec225d4..000000000000 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ /dev/null @@ -1,818 +0,0 @@ -/* - * OMAP3/4 - specific DPLL control functions - * - * Copyright (C) 2009-2010 Texas Instruments, Inc. - * Copyright (C) 2009-2010 Nokia Corporation - * - * Written by Paul Walmsley - * Testing and integration fixes by Jouni Högander - * - * 36xx support added by Vishwanath BS, Richard Woodruff, and Nishanth - * Menon - * - * Parts of this code are based on code written by - * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/device.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/bitops.h> -#include <linux/clkdev.h> - -#include "clockdomain.h" -#include "clock.h" - -/* CM_AUTOIDLE_PLL*.AUTO_* bit values */ -#define DPLL_AUTOIDLE_DISABLE 0x0 -#define DPLL_AUTOIDLE_LOW_POWER_STOP 0x1 - -#define MAX_DPLL_WAIT_TRIES 1000000 - -/* Private functions */ - -/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */ -static void _omap3_dpll_write_clken(struct clk_hw_omap *clk, u8 clken_bits) -{ - const struct dpll_data *dd; - u32 v; - - dd = clk->dpll_data; - - v = omap2_clk_readl(clk, dd->control_reg); - v &= ~dd->enable_mask; - v |= clken_bits << __ffs(dd->enable_mask); - omap2_clk_writel(v, clk, dd->control_reg); -} - -/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */ -static int _omap3_wait_dpll_status(struct clk_hw_omap *clk, u8 state) -{ - const struct dpll_data *dd; - int i = 0; - int ret = -EINVAL; - const char *clk_name; - - dd = clk->dpll_data; - clk_name = __clk_get_name(clk->hw.clk); - - state <<= __ffs(dd->idlest_mask); - - while (((omap2_clk_readl(clk, dd->idlest_reg) & dd->idlest_mask) - != state) && i < MAX_DPLL_WAIT_TRIES) { - i++; - udelay(1); - } - - if (i == MAX_DPLL_WAIT_TRIES) { - printk(KERN_ERR "clock: %s failed transition to '%s'\n", - clk_name, (state) ? "locked" : "bypassed"); - } else { - pr_debug("clock: %s transition to '%s' in %d loops\n", - clk_name, (state) ? "locked" : "bypassed", i); - - ret = 0; - } - - return ret; -} - -/* From 3430 TRM ES2 4.7.6.2 */ -static u16 _omap3_dpll_compute_freqsel(struct clk_hw_omap *clk, u8 n) -{ - unsigned long fint; - u16 f = 0; - - fint = __clk_get_rate(clk->dpll_data->clk_ref) / n; - - pr_debug("clock: fint is %lu\n", fint); - - if (fint >= 750000 && fint <= 1000000) - f = 0x3; - else if (fint > 1000000 && fint <= 1250000) - f = 0x4; - else if (fint > 1250000 && fint <= 1500000) - f = 0x5; - else if (fint > 1500000 && fint <= 1750000) - f = 0x6; - else if (fint > 1750000 && fint <= 2100000) - f = 0x7; - else if (fint > 7500000 && fint <= 10000000) - f = 0xB; - else if (fint > 10000000 && fint <= 12500000) - f = 0xC; - else if (fint > 12500000 && fint <= 15000000) - f = 0xD; - else if (fint > 15000000 && fint <= 17500000) - f = 0xE; - else if (fint > 17500000 && fint <= 21000000) - f = 0xF; - else - pr_debug("clock: unknown freqsel setting for %d\n", n); - - return f; -} - -/* - * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness - * @clk: pointer to a DPLL struct clk - * - * Instructs a non-CORE DPLL to lock. Waits for the DPLL to report - * readiness before returning. Will save and restore the DPLL's - * autoidle state across the enable, per the CDP code. If the DPLL - * locked successfully, return 0; if the DPLL did not lock in the time - * allotted, or DPLL3 was passed in, return -EINVAL. - */ -static int _omap3_noncore_dpll_lock(struct clk_hw_omap *clk) -{ - const struct dpll_data *dd; - u8 ai; - u8 state = 1; - int r = 0; - - pr_debug("clock: locking DPLL %s\n", __clk_get_name(clk->hw.clk)); - - dd = clk->dpll_data; - state <<= __ffs(dd->idlest_mask); - - /* Check if already locked */ - if ((omap2_clk_readl(clk, dd->idlest_reg) & dd->idlest_mask) == state) - goto done; - - ai = omap3_dpll_autoidle_read(clk); - - if (ai) - omap3_dpll_deny_idle(clk); - - _omap3_dpll_write_clken(clk, DPLL_LOCKED); - - r = _omap3_wait_dpll_status(clk, 1); - - if (ai) - omap3_dpll_allow_idle(clk); - -done: - return r; -} - -/* - * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness - * @clk: pointer to a DPLL struct clk - * - * Instructs a non-CORE DPLL to enter low-power bypass mode. In - * bypass mode, the DPLL's rate is set equal to its parent clock's - * rate. Waits for the DPLL to report readiness before returning. - * Will save and restore the DPLL's autoidle state across the enable, - * per the CDP code. If the DPLL entered bypass mode successfully, - * return 0; if the DPLL did not enter bypass in the time allotted, or - * DPLL3 was passed in, or the DPLL does not support low-power bypass, - * return -EINVAL. - */ -static int _omap3_noncore_dpll_bypass(struct clk_hw_omap *clk) -{ - int r; - u8 ai; - - if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) - return -EINVAL; - - pr_debug("clock: configuring DPLL %s for low-power bypass\n", - __clk_get_name(clk->hw.clk)); - - ai = omap3_dpll_autoidle_read(clk); - - _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS); - - r = _omap3_wait_dpll_status(clk, 0); - - if (ai) - omap3_dpll_allow_idle(clk); - - return r; -} - -/* - * _omap3_noncore_dpll_stop - instruct a DPLL to stop - * @clk: pointer to a DPLL struct clk - * - * Instructs a non-CORE DPLL to enter low-power stop. Will save and - * restore the DPLL's autoidle state across the stop, per the CDP - * code. If DPLL3 was passed in, or the DPLL does not support - * low-power stop, return -EINVAL; otherwise, return 0. - */ -static int _omap3_noncore_dpll_stop(struct clk_hw_omap *clk) -{ - u8 ai; - - if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP))) - return -EINVAL; - - pr_debug("clock: stopping DPLL %s\n", __clk_get_name(clk->hw.clk)); - - ai = omap3_dpll_autoidle_read(clk); - - _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP); - - if (ai) - omap3_dpll_allow_idle(clk); - - return 0; -} - -/** - * _lookup_dco - Lookup DCO used by j-type DPLL - * @clk: pointer to a DPLL struct clk - * @dco: digital control oscillator selector - * @m: DPLL multiplier to set - * @n: DPLL divider to set - * - * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)" - * - * XXX This code is not needed for 3430/AM35xx; can it be optimized - * out in non-multi-OMAP builds for those chips? - */ -static void _lookup_dco(struct clk_hw_omap *clk, u8 *dco, u16 m, u8 n) -{ - unsigned long fint, clkinp; /* watch out for overflow */ - - clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk)); - fint = (clkinp / n) * m; - - if (fint < 1000000000) - *dco = 2; - else - *dco = 4; -} - -/** - * _lookup_sddiv - Calculate sigma delta divider for j-type DPLL - * @clk: pointer to a DPLL struct clk - * @sd_div: target sigma-delta divider - * @m: DPLL multiplier to set - * @n: DPLL divider to set - * - * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)" - * - * XXX This code is not needed for 3430/AM35xx; can it be optimized - * out in non-multi-OMAP builds for those chips? - */ -static void _lookup_sddiv(struct clk_hw_omap *clk, u8 *sd_div, u16 m, u8 n) -{ - unsigned long clkinp, sd; /* watch out for overflow */ - int mod1, mod2; - - clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk)); - - /* - * target sigma-delta to near 250MHz - * sd = ceil[(m/(n+1)) * (clkinp_MHz / 250)] - */ - clkinp /= 100000; /* shift from MHz to 10*Hz for 38.4 and 19.2 */ - mod1 = (clkinp * m) % (250 * n); - sd = (clkinp * m) / (250 * n); - mod2 = sd % 10; - sd /= 10; - - if (mod1 || mod2) - sd++; - *sd_div = sd; -} - -/* - * _omap3_noncore_dpll_program - set non-core DPLL M,N values directly - * @clk: struct clk * of DPLL to set - * @freqsel: FREQSEL value to set - * - * Program the DPLL with the last M, N values calculated, and wait for - * the DPLL to lock. Returns -EINVAL upon error, or 0 upon success. - */ -static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel) -{ - struct dpll_data *dd = clk->dpll_data; - u8 dco, sd_div; - u32 v; - - /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */ - _omap3_noncore_dpll_bypass(clk); - - /* - * Set jitter correction. Jitter correction applicable for OMAP343X - * only since freqsel field is no longer present on other devices. - */ - if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) { - v = omap2_clk_readl(clk, dd->control_reg); - v &= ~dd->freqsel_mask; - v |= freqsel << __ffs(dd->freqsel_mask); - omap2_clk_writel(v, clk, dd->control_reg); - } - - /* Set DPLL multiplier, divider */ - v = omap2_clk_readl(clk, dd->mult_div1_reg); - - /* Handle Duty Cycle Correction */ - if (dd->dcc_mask) { - if (dd->last_rounded_rate >= dd->dcc_rate) - v |= dd->dcc_mask; /* Enable DCC */ - else - v &= ~dd->dcc_mask; /* Disable DCC */ - } - - v &= ~(dd->mult_mask | dd->div1_mask); - v |= dd->last_rounded_m << __ffs(dd->mult_mask); - v |= (dd->last_rounded_n - 1) << __ffs(dd->div1_mask); - - /* Configure dco and sd_div for dplls that have these fields */ - if (dd->dco_mask) { - _lookup_dco(clk, &dco, dd->last_rounded_m, dd->last_rounded_n); - v &= ~(dd->dco_mask); - v |= dco << __ffs(dd->dco_mask); - } - if (dd->sddiv_mask) { - _lookup_sddiv(clk, &sd_div, dd->last_rounded_m, - dd->last_rounded_n); - v &= ~(dd->sddiv_mask); - v |= sd_div << __ffs(dd->sddiv_mask); - } - - omap2_clk_writel(v, clk, dd->mult_div1_reg); - - /* Set 4X multiplier and low-power mode */ - if (dd->m4xen_mask || dd->lpmode_mask) { - v = omap2_clk_readl(clk, dd->control_reg); - - if (dd->m4xen_mask) { - if (dd->last_rounded_m4xen) - v |= dd->m4xen_mask; - else - v &= ~dd->m4xen_mask; - } - - if (dd->lpmode_mask) { - if (dd->last_rounded_lpmode) - v |= dd->lpmode_mask; - else - v &= ~dd->lpmode_mask; - } - - omap2_clk_writel(v, clk, dd->control_reg); - } - - /* We let the clock framework set the other output dividers later */ - - /* REVISIT: Set ramp-up delay? */ - - _omap3_noncore_dpll_lock(clk); - - return 0; -} - -/* Public functions */ - -/** - * omap3_dpll_recalc - recalculate DPLL rate - * @clk: DPLL struct clk - * - * Recalculate and propagate the DPLL rate. - */ -unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - - return omap2_get_dpll_rate(clk); -} - -/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */ - -/** - * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode - * @clk: pointer to a DPLL struct clk - * - * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock. - * The choice of modes depends on the DPLL's programmed rate: if it is - * the same as the DPLL's parent clock, it will enter bypass; - * otherwise, it will enter lock. This code will wait for the DPLL to - * indicate readiness before returning, unless the DPLL takes too long - * to enter the target state. Intended to be used as the struct clk's - * enable function. If DPLL3 was passed in, or the DPLL does not - * support low-power stop, or if the DPLL took too long to enter - * bypass or lock, return -EINVAL; otherwise, return 0. - */ -int omap3_noncore_dpll_enable(struct clk_hw *hw) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - int r; - struct dpll_data *dd; - struct clk_hw *parent; - - dd = clk->dpll_data; - if (!dd) - return -EINVAL; - - if (clk->clkdm) { - r = clkdm_clk_enable(clk->clkdm, hw->clk); - if (r) { - WARN(1, - "%s: could not enable %s's clockdomain %s: %d\n", - __func__, __clk_get_name(hw->clk), - clk->clkdm->name, r); - return r; - } - } - - parent = __clk_get_hw(__clk_get_parent(hw->clk)); - - if (__clk_get_rate(hw->clk) == __clk_get_rate(dd->clk_bypass)) { - WARN_ON(parent != __clk_get_hw(dd->clk_bypass)); - r = _omap3_noncore_dpll_bypass(clk); - } else { - WARN_ON(parent != __clk_get_hw(dd->clk_ref)); - r = _omap3_noncore_dpll_lock(clk); - } - - return r; -} - -/** - * omap3_noncore_dpll_disable - instruct a DPLL to enter low-power stop - * @clk: pointer to a DPLL struct clk - * - * Instructs a non-CORE DPLL to enter low-power stop. This function is - * intended for use in struct clkops. No return value. - */ -void omap3_noncore_dpll_disable(struct clk_hw *hw) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - - _omap3_noncore_dpll_stop(clk); - if (clk->clkdm) - clkdm_clk_disable(clk->clkdm, hw->clk); -} - - -/* Non-CORE DPLL rate set code */ - -/** - * omap3_noncore_dpll_determine_rate - determine rate for a DPLL - * @hw: pointer to the clock to determine rate for - * @rate: target rate for the DPLL - * @best_parent_rate: pointer for returning best parent rate - * @best_parent_clk: pointer for returning best parent clock - * - * Determines which DPLL mode to use for reaching a desired target rate. - * Checks whether the DPLL shall be in bypass or locked mode, and if - * locked, calculates the M,N values for the DPLL via round-rate. - * Returns a positive clock rate with success, negative error value - * in failure. - */ -long omap3_noncore_dpll_determine_rate(struct clk_hw *hw, unsigned long rate, - unsigned long min_rate, - unsigned long max_rate, - unsigned long *best_parent_rate, - struct clk_hw **best_parent_clk) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - struct dpll_data *dd; - - if (!hw || !rate) - return -EINVAL; - - dd = clk->dpll_data; - if (!dd) - return -EINVAL; - - if (__clk_get_rate(dd->clk_bypass) == rate && - (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) { - *best_parent_clk = __clk_get_hw(dd->clk_bypass); - } else { - rate = omap2_dpll_round_rate(hw, rate, best_parent_rate); - *best_parent_clk = __clk_get_hw(dd->clk_ref); - } - - *best_parent_rate = rate; - - return rate; -} - -/** - * omap3_noncore_dpll_set_parent - set parent for a DPLL clock - * @hw: pointer to the clock to set parent for - * @index: parent index to select - * - * Sets parent for a DPLL clock. This sets the DPLL into bypass or - * locked mode. Returns 0 with success, negative error value otherwise. - */ -int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - int ret; - - if (!hw) - return -EINVAL; - - if (index) - ret = _omap3_noncore_dpll_bypass(clk); - else - ret = _omap3_noncore_dpll_lock(clk); - - return ret; -} - -/** - * omap3_noncore_dpll_set_rate - set rate for a DPLL clock - * @hw: pointer to the clock to set parent for - * @rate: target rate for the clock - * @parent_rate: rate of the parent clock - * - * Sets rate for a DPLL clock. First checks if the clock parent is - * reference clock (in bypass mode, the rate of the clock can't be - * changed) and proceeds with the rate change operation. Returns 0 - * with success, negative error value otherwise. - */ -int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - struct dpll_data *dd; - u16 freqsel = 0; - int ret; - - if (!hw || !rate) - return -EINVAL; - - dd = clk->dpll_data; - if (!dd) - return -EINVAL; - - if (__clk_get_hw(__clk_get_parent(hw->clk)) != - __clk_get_hw(dd->clk_ref)) - return -EINVAL; - - if (dd->last_rounded_rate == 0) - return -EINVAL; - - /* Freqsel is available only on OMAP343X devices */ - if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) { - freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n); - WARN_ON(!freqsel); - } - - pr_debug("%s: %s: set rate: locking rate to %lu.\n", __func__, - __clk_get_name(hw->clk), rate); - - ret = omap3_noncore_dpll_program(clk, freqsel); - - return ret; -} - -/** - * omap3_noncore_dpll_set_rate_and_parent - set rate and parent for a DPLL clock - * @hw: pointer to the clock to set rate and parent for - * @rate: target rate for the DPLL - * @parent_rate: clock rate of the DPLL parent - * @index: new parent index for the DPLL, 0 - reference, 1 - bypass - * - * Sets rate and parent for a DPLL clock. If new parent is the bypass - * clock, only selects the parent. Otherwise proceeds with a rate - * change, as this will effectively also change the parent as the - * DPLL is put into locked mode. Returns 0 with success, negative error - * value otherwise. - */ -int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw, - unsigned long rate, - unsigned long parent_rate, - u8 index) -{ - int ret; - - if (!hw || !rate) - return -EINVAL; - - /* - * clk-ref at index[0], in which case we only need to set rate, - * the parent will be changed automatically with the lock sequence. - * With clk-bypass case we only need to change parent. - */ - if (index) - ret = omap3_noncore_dpll_set_parent(hw, index); - else - ret = omap3_noncore_dpll_set_rate(hw, rate, parent_rate); - - return ret; -} - -/* DPLL autoidle read/set code */ - -/** - * omap3_dpll_autoidle_read - read a DPLL's autoidle bits - * @clk: struct clk * of the DPLL to read - * - * Return the DPLL's autoidle bits, shifted down to bit 0. Returns - * -EINVAL if passed a null pointer or if the struct clk does not - * appear to refer to a DPLL. - */ -u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk) -{ - const struct dpll_data *dd; - u32 v; - - if (!clk || !clk->dpll_data) - return -EINVAL; - - dd = clk->dpll_data; - - if (!dd->autoidle_reg) - return -EINVAL; - - v = omap2_clk_readl(clk, dd->autoidle_reg); - v &= dd->autoidle_mask; - v >>= __ffs(dd->autoidle_mask); - - return v; -} - -/** - * omap3_dpll_allow_idle - enable DPLL autoidle bits - * @clk: struct clk * of the DPLL to operate on - * - * Enable DPLL automatic idle control. This automatic idle mode - * switching takes effect only when the DPLL is locked, at least on - * OMAP3430. The DPLL will enter low-power stop when its downstream - * clocks are gated. No return value. - */ -void omap3_dpll_allow_idle(struct clk_hw_omap *clk) -{ - const struct dpll_data *dd; - u32 v; - - if (!clk || !clk->dpll_data) - return; - - dd = clk->dpll_data; - - if (!dd->autoidle_reg) - return; - - /* - * REVISIT: CORE DPLL can optionally enter low-power bypass - * by writing 0x5 instead of 0x1. Add some mechanism to - * optionally enter this mode. - */ - v = omap2_clk_readl(clk, dd->autoidle_reg); - v &= ~dd->autoidle_mask; - v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask); - omap2_clk_writel(v, clk, dd->autoidle_reg); - -} - -/** - * omap3_dpll_deny_idle - prevent DPLL from automatically idling - * @clk: struct clk * of the DPLL to operate on - * - * Disable DPLL automatic idle control. No return value. - */ -void omap3_dpll_deny_idle(struct clk_hw_omap *clk) -{ - const struct dpll_data *dd; - u32 v; - - if (!clk || !clk->dpll_data) - return; - - dd = clk->dpll_data; - - if (!dd->autoidle_reg) - return; - - v = omap2_clk_readl(clk, dd->autoidle_reg); - v &= ~dd->autoidle_mask; - v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask); - omap2_clk_writel(v, clk, dd->autoidle_reg); - -} - -/* Clock control for DPLL outputs */ - -/* Find the parent DPLL for the given clkoutx2 clock */ -static struct clk_hw_omap *omap3_find_clkoutx2_dpll(struct clk_hw *hw) -{ - struct clk_hw_omap *pclk = NULL; - struct clk *parent; - - /* Walk up the parents of clk, looking for a DPLL */ - do { - do { - parent = __clk_get_parent(hw->clk); - hw = __clk_get_hw(parent); - } while (hw && (__clk_get_flags(hw->clk) & CLK_IS_BASIC)); - if (!hw) - break; - pclk = to_clk_hw_omap(hw); - } while (pclk && !pclk->dpll_data); - - /* clk does not have a DPLL as a parent? error in the clock data */ - if (!pclk) { - WARN_ON(1); - return NULL; - } - - return pclk; -} - -/** - * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate - * @clk: DPLL output struct clk - * - * Using parent clock DPLL data, look up DPLL state. If locked, set our - * rate to the dpll_clk * 2; otherwise, just use dpll_clk. - */ -unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw, - unsigned long parent_rate) -{ - const struct dpll_data *dd; - unsigned long rate; - u32 v; - struct clk_hw_omap *pclk = NULL; - - if (!parent_rate) - return 0; - - pclk = omap3_find_clkoutx2_dpll(hw); - - if (!pclk) - return 0; - - dd = pclk->dpll_data; - - WARN_ON(!dd->enable_mask); - - v = omap2_clk_readl(pclk, dd->control_reg) & dd->enable_mask; - v >>= __ffs(dd->enable_mask); - if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE)) - rate = parent_rate; - else - rate = parent_rate * 2; - return rate; -} - -int omap3_clkoutx2_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - return 0; -} - -long omap3_clkoutx2_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *prate) -{ - const struct dpll_data *dd; - u32 v; - struct clk_hw_omap *pclk = NULL; - - if (!*prate) - return 0; - - pclk = omap3_find_clkoutx2_dpll(hw); - - if (!pclk) - return 0; - - dd = pclk->dpll_data; - - /* TYPE J does not have a clkoutx2 */ - if (dd->flags & DPLL_J_TYPE) { - *prate = __clk_round_rate(__clk_get_parent(pclk->hw.clk), rate); - return *prate; - } - - WARN_ON(!dd->enable_mask); - - v = omap2_clk_readl(pclk, dd->control_reg) & dd->enable_mask; - v >>= __ffs(dd->enable_mask); - - /* If in bypass, the rate is fixed to the bypass rate*/ - if (v != OMAP3XXX_EN_DPLL_LOCKED) - return *prate; - - if (__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT) { - unsigned long best_parent; - - best_parent = (rate / 2); - *prate = __clk_round_rate(__clk_get_parent(hw->clk), - best_parent); - } - - return *prate * 2; -} - -/* OMAP3/4 non-CORE DPLL clkops */ -const struct clk_hw_omap_ops clkhwops_omap3_dpll = { - .allow_idle = omap3_dpll_allow_idle, - .deny_idle = omap3_dpll_deny_idle, -}; diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c deleted file mode 100644 index f231be05b9a6..000000000000 --- a/arch/arm/mach-omap2/dpll44xx.c +++ /dev/null @@ -1,232 +0,0 @@ -/* - * OMAP4-specific DPLL control functions - * - * Copyright (C) 2011 Texas Instruments, Inc. - * Rajendra Nayak - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/bitops.h> - -#include "clock.h" - -/* - * Maximum DPLL input frequency (FINT) and output frequency (FOUT) that - * can supported when using the DPLL low-power mode. Frequencies are - * defined in OMAP4430/60 Public TRM section 3.6.3.3.2 "Enable Control, - * Status, and Low-Power Operation Mode". - */ -#define OMAP4_DPLL_LP_FINT_MAX 1000000 -#define OMAP4_DPLL_LP_FOUT_MAX 100000000 - -/* - * Bitfield declarations - */ -#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK (1 << 8) -#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK (1 << 10) -#define OMAP4430_DPLL_REGM4XEN_MASK (1 << 11) - -/* Static rate multiplier for OMAP4 REGM4XEN clocks */ -#define OMAP4430_REGM4XEN_MULT 4 - -void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk) -{ - u32 v; - u32 mask; - - if (!clk || !clk->clksel_reg) - return; - - mask = clk->flags & CLOCK_CLKOUTX2 ? - OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK : - OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK; - - v = omap2_clk_readl(clk, clk->clksel_reg); - /* Clear the bit to allow gatectrl */ - v &= ~mask; - omap2_clk_writel(v, clk, clk->clksel_reg); -} - -void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk) -{ - u32 v; - u32 mask; - - if (!clk || !clk->clksel_reg) - return; - - mask = clk->flags & CLOCK_CLKOUTX2 ? - OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK : - OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK; - - v = omap2_clk_readl(clk, clk->clksel_reg); - /* Set the bit to deny gatectrl */ - v |= mask; - omap2_clk_writel(v, clk, clk->clksel_reg); -} - -const struct clk_hw_omap_ops clkhwops_omap4_dpllmx = { - .allow_idle = omap4_dpllmx_allow_gatectrl, - .deny_idle = omap4_dpllmx_deny_gatectrl, -}; - -/** - * omap4_dpll_lpmode_recalc - compute DPLL low-power setting - * @dd: pointer to the dpll data structure - * - * Calculates if low-power mode can be enabled based upon the last - * multiplier and divider values calculated. If low-power mode can be - * enabled, then the bit to enable low-power mode is stored in the - * last_rounded_lpmode variable. This implementation is based upon the - * criteria for enabling low-power mode as described in the OMAP4430/60 - * Public TRM section 3.6.3.3.2 "Enable Control, Status, and Low-Power - * Operation Mode". - */ -static void omap4_dpll_lpmode_recalc(struct dpll_data *dd) -{ - long fint, fout; - - fint = __clk_get_rate(dd->clk_ref) / (dd->last_rounded_n + 1); - fout = fint * dd->last_rounded_m; - - if ((fint < OMAP4_DPLL_LP_FINT_MAX) && (fout < OMAP4_DPLL_LP_FOUT_MAX)) - dd->last_rounded_lpmode = 1; - else - dd->last_rounded_lpmode = 0; -} - -/** - * omap4_dpll_regm4xen_recalc - compute DPLL rate, considering REGM4XEN bit - * @clk: struct clk * of the DPLL to compute the rate for - * - * Compute the output rate for the OMAP4 DPLL represented by @clk. - * Takes the REGM4XEN bit into consideration, which is needed for the - * OMAP4 ABE DPLL. Returns the DPLL's output rate (before M-dividers) - * upon success, or 0 upon error. - */ -unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - u32 v; - unsigned long rate; - struct dpll_data *dd; - - if (!clk || !clk->dpll_data) - return 0; - - dd = clk->dpll_data; - - rate = omap2_get_dpll_rate(clk); - - /* regm4xen adds a multiplier of 4 to DPLL calculations */ - v = omap2_clk_readl(clk, dd->control_reg); - if (v & OMAP4430_DPLL_REGM4XEN_MASK) - rate *= OMAP4430_REGM4XEN_MULT; - - return rate; -} - -/** - * omap4_dpll_regm4xen_round_rate - round DPLL rate, considering REGM4XEN bit - * @clk: struct clk * of the DPLL to round a rate for - * @target_rate: the desired rate of the DPLL - * - * Compute the rate that would be programmed into the DPLL hardware - * for @clk if set_rate() were to be provided with the rate - * @target_rate. Takes the REGM4XEN bit into consideration, which is - * needed for the OMAP4 ABE DPLL. Returns the rounded rate (before - * M-dividers) upon success, -EINVAL if @clk is null or not a DPLL, or - * ~0 if an error occurred in omap2_dpll_round_rate(). - */ -long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw, - unsigned long target_rate, - unsigned long *parent_rate) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - struct dpll_data *dd; - long r; - - if (!clk || !clk->dpll_data) - return -EINVAL; - - dd = clk->dpll_data; - - dd->last_rounded_m4xen = 0; - - /* - * First try to compute the DPLL configuration for - * target rate without using the 4X multiplier. - */ - r = omap2_dpll_round_rate(hw, target_rate, NULL); - if (r != ~0) - goto out; - - /* - * If we did not find a valid DPLL configuration, try again, but - * this time see if using the 4X multiplier can help. Enabling the - * 4X multiplier is equivalent to dividing the target rate by 4. - */ - r = omap2_dpll_round_rate(hw, target_rate / OMAP4430_REGM4XEN_MULT, - NULL); - if (r == ~0) - return r; - - dd->last_rounded_rate *= OMAP4430_REGM4XEN_MULT; - dd->last_rounded_m4xen = 1; - -out: - omap4_dpll_lpmode_recalc(dd); - - return dd->last_rounded_rate; -} - -/** - * omap4_dpll_regm4xen_determine_rate - determine rate for a DPLL - * @hw: pointer to the clock to determine rate for - * @rate: target rate for the DPLL - * @best_parent_rate: pointer for returning best parent rate - * @best_parent_clk: pointer for returning best parent clock - * - * Determines which DPLL mode to use for reaching a desired rate. - * Checks whether the DPLL shall be in bypass or locked mode, and if - * locked, calculates the M,N values for the DPLL via round-rate. - * Returns a positive clock rate with success, negative error value - * in failure. - */ -long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw, unsigned long rate, - unsigned long min_rate, - unsigned long max_rate, - unsigned long *best_parent_rate, - struct clk_hw **best_parent_clk) -{ - struct clk_hw_omap *clk = to_clk_hw_omap(hw); - struct dpll_data *dd; - - if (!hw || !rate) - return -EINVAL; - - dd = clk->dpll_data; - if (!dd) - return -EINVAL; - - if (__clk_get_rate(dd->clk_bypass) == rate && - (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) { - *best_parent_clk = __clk_get_hw(dd->clk_bypass); - } else { - rate = omap4_dpll_regm4xen_round_rate(hw, rate, - best_parent_rate); - *best_parent_clk = __clk_get_hw(dd->clk_ref); - } - - *best_parent_rate = rate; - - return rate; -} diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 820dde8b5b04..a253aafbb9a2 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -37,7 +37,6 @@ #include "clock.h" #include "clock2xxx.h" #include "clock3xxx.h" -#include "clock44xx.h" #include "omap-pm.h" #include "sdrc.h" #include "control.h" @@ -723,6 +722,8 @@ int __init omap_clk_init(void) ti_clk_init_features(); + omap2_clk_setup_ll_ops(); + if (of_have_populated_dt()) { ret = omap_control_init(); if (ret) diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index 8e52621b5a6b..e1d2e991d17a 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -392,6 +392,7 @@ static struct irq_chip wakeupgen_chip = { .irq_mask = wakeupgen_mask, .irq_unmask = wakeupgen_unmask, .irq_retrigger = irq_chip_retrigger_hierarchy, + .irq_set_type = irq_chip_set_type_parent, .flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND, #ifdef CONFIG_SMP .irq_set_affinity = irq_chip_set_affinity_parent, diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index d78c12e7cb5e..6ef9e6341d96 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -130,6 +130,7 @@ #include <linux/kernel.h> #include <linux/errno.h> #include <linux/io.h> +#include <linux/clk.h> #include <linux/clk-provider.h> #include <linux/delay.h> #include <linux/err.h> @@ -2373,6 +2374,9 @@ static int of_dev_hwmod_lookup(struct device_node *np, * registers. This address is needed early so the OCP registers that * are part of the device's address space can be ioremapped properly. * + * If SYSC access is not needed, the registers will not be remapped + * and non-availability of MPU access is not treated as an error. + * * Returns 0 on success, -EINVAL if an invalid hwmod is passed, and * -ENXIO on absent or invalid register target address space. */ @@ -2387,6 +2391,11 @@ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data, _save_mpu_port_index(oh); + /* if we don't need sysc access we don't need to ioremap */ + if (!oh->class->sysc) + return 0; + + /* we can't continue without MPU PORT if we need sysc access */ if (oh->_int_flags & _HWMOD_NO_MPU_PORT) return -ENXIO; @@ -2396,8 +2405,10 @@ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data, oh->name); /* Extract the IO space from device tree blob */ - if (!np) + if (!np) { + pr_err("omap_hwmod: %s: no dt node\n", oh->name); return -ENXIO; + } va_start = of_iomap(np, index + oh->mpu_rt_idx); } else { @@ -2456,13 +2467,11 @@ static int __init _init(struct omap_hwmod *oh, void *data) oh->name, np->name); } - if (oh->class->sysc) { - r = _init_mpu_rt_base(oh, NULL, index, np); - if (r < 0) { - WARN(1, "omap_hwmod: %s: doesn't have mpu register target base\n", - oh->name); - return 0; - } + r = _init_mpu_rt_base(oh, NULL, index, np); + if (r < 0) { + WARN(1, "omap_hwmod: %s: doesn't have mpu register target base\n", + oh->name); + return 0; } r = _init_clocks(oh, NULL); diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 2606c6608bd8..562247bced49 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -827,8 +827,7 @@ static struct omap_hwmod_class_sysconfig dra7xx_gpmc_sysc = { .syss_offs = 0x0014, .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -844,7 +843,7 @@ static struct omap_hwmod dra7xx_gpmc_hwmod = { .class = &dra7xx_gpmc_hwmod_class, .clkdm_name = "l3main1_clkdm", /* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */ - .flags = HWMOD_SWSUP_SIDLE | DEBUG_OMAP_GPMC_HWMOD_FLAGS, + .flags = DEBUG_OMAP_GPMC_HWMOD_FLAGS, .main_clk = "l3_iclk_div", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index b1aad7e1426c..2a1a4180d5d0 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -25,6 +25,7 @@ #include <linux/sysfs.h> #include <linux/module.h> #include <linux/delay.h> +#include <linux/clk.h> #include <linux/clk-provider.h> #include <linux/irq.h> #include <linux/time.h> diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c index 79f033b1ddff..d0871786dd8a 100644 --- a/arch/arm/mach-orion5x/board-dt.c +++ b/arch/arm/mach-orion5x/board-dt.c @@ -16,7 +16,6 @@ #include <linux/of_platform.h> #include <linux/cpu.h> #include <linux/mbus.h> -#include <linux/clk-provider.h> #include <linux/clocksource.h> #include <asm/system_misc.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c index c092730749b9..bf366b39fa61 100644 --- a/arch/arm/mach-pxa/capc7117.c +++ b/arch/arm/mach-pxa/capc7117.c @@ -24,6 +24,7 @@ #include <linux/ata_platform.h> #include <linux/serial_8250.h> #include <linux/gpio.h> +#include <linux/regulator/machine.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -144,6 +145,8 @@ static void __init capc7117_init(void) capc7117_uarts_init(); capc7117_ide_init(); + + regulator_has_full_constraints(); } MACHINE_START(CAPC7117, diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index bb99f59a36d8..a17a91eb8e9a 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -13,6 +13,7 @@ #include <linux/syscore_ops.h> #include <linux/irq.h> #include <linux/gpio.h> +#include <linux/regulator/machine.h> #include <linux/dm9000.h> #include <linux/leds.h> @@ -466,6 +467,8 @@ static void __init cmx2xx_init(void) cmx2xx_init_ac97(); cmx2xx_init_touchscreen(); cmx2xx_init_leds(); + + regulator_has_full_constraints(); } static void __init cmx2xx_init_irq(void) diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index 4d3588d26c2a..5851f4c254c1 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -835,6 +835,8 @@ static void __init cm_x300_init(void) cm_x300_init_ac97(); cm_x300_init_wi2wi(); cm_x300_init_bl(); + + regulator_has_full_constraints(); } static void __init cm_x300_fixup(struct tag *tags, char **cmdline) diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c index 5f9d9303b346..3503826333c7 100644 --- a/arch/arm/mach-pxa/colibri-pxa270.c +++ b/arch/arm/mach-pxa/colibri-pxa270.c @@ -18,6 +18,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/platform_device.h> +#include <linux/regulator/machine.h> #include <linux/ucb1400.h> #include <asm/mach/arch.h> @@ -294,6 +295,8 @@ static void __init colibri_pxa270_init(void) printk(KERN_ERR "Illegal colibri_pxa270_baseboard type %d\n", colibri_pxa270_baseboard); } + + regulator_has_full_constraints(); } /* The "Income s.r.o. SH-Dmaster PXA270 SBC" board can be booted either diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 51531ecffca8..9d7072b04045 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -1306,6 +1306,8 @@ static void __init em_x270_init(void) em_x270_init_i2c(); em_x270_init_camera(); em_x270_userspace_consumers_init(); + + regulator_has_full_constraints(); } MACHINE_START(EM_X270, "Compulab EM-X270") diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c index c98511c5abd1..9b0eb0252af6 100644 --- a/arch/arm/mach-pxa/icontrol.c +++ b/arch/arm/mach-pxa/icontrol.c @@ -26,6 +26,7 @@ #include <linux/spi/spi.h> #include <linux/spi/pxa2xx_spi.h> #include <linux/can/platform/mcp251x.h> +#include <linux/regulator/machine.h> #include "generic.h" @@ -185,6 +186,8 @@ static void __init icontrol_init(void) mxm_8x10_mmc_init(); icontrol_can_init(); + + regulator_has_full_constraints(); } MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM") diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 872dcb20e757..066e3a250ee0 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -26,6 +26,7 @@ #include <linux/dm9000.h> #include <linux/mtd/physmap.h> #include <linux/mtd/partitions.h> +#include <linux/regulator/machine.h> #include <linux/i2c/pxa-i2c.h> #include <asm/types.h> @@ -534,6 +535,8 @@ static void __init trizeps4_init(void) BCR_writew(trizeps_conxs_bcr); board_backlight_power(1); + + regulator_has_full_constraints(); } static void __init trizeps4_map_io(void) diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index aa89488f961e..54122a983ae3 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -24,6 +24,7 @@ #include <linux/dm9000.h> #include <linux/ucb1400.h> #include <linux/ata_platform.h> +#include <linux/regulator/machine.h> #include <linux/regulator/max1586.h> #include <linux/i2c/pxa-i2c.h> @@ -711,6 +712,8 @@ static void __init vpac270_init(void) vpac270_ts_init(); vpac270_rtc_init(); vpac270_ide_init(); + + regulator_has_full_constraints(); } MACHINE_START(VPAC270, "Voipac PXA270") diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index ac2ae5c71ab4..6158566fa0f7 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -868,6 +868,8 @@ static void __init zeus_init(void) i2c_register_board_info(0, ARRAY_AND_SIZE(zeus_i2c_devices)); pxa2xx_set_spi_info(3, &pxa2xx_spi_ssp3_master_info); spi_register_board_info(zeus_spi_board_info, ARRAY_SIZE(zeus_spi_board_info)); + + regulator_has_full_constraints(); } static struct map_desc zeus_io_desc[] __initdata = { diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c index 16547f2641a3..25d6676f8d6e 100644 --- a/arch/arm/mach-s3c64xx/common.c +++ b/arch/arm/mach-s3c64xx/common.c @@ -21,7 +21,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/module.h> -#include <linux/clk-provider.h> #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/serial_core.h> diff --git a/arch/arm/mach-spear/generic.h b/arch/arm/mach-spear/generic.h index a99d90a4d09c..06640914d9a0 100644 --- a/arch/arm/mach-spear/generic.h +++ b/arch/arm/mach-spear/generic.h @@ -3,7 +3,7 @@ * * Copyright (C) 2009-2012 ST Microelectronics * Rajeev Kumar <rajeev-dlh.kumar@st.com> - * Viresh Kumar <viresh.linux@gmail.com> + * Viresh Kumar <vireshk@kernel.org> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear/include/mach/irqs.h b/arch/arm/mach-spear/include/mach/irqs.h index 92da0a8c6bce..7058720c5278 100644 --- a/arch/arm/mach-spear/include/mach/irqs.h +++ b/arch/arm/mach-spear/include/mach/irqs.h @@ -3,7 +3,7 @@ * * Copyright (C) 2009-2012 ST Microelectronics * Rajeev Kumar <rajeev-dlh.kumar@st.com> - * Viresh Kumar <viresh.linux@gmail.com> + * Viresh Kumar <vireshk@kernel.org> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear/include/mach/misc_regs.h b/arch/arm/mach-spear/include/mach/misc_regs.h index 935639ce59ba..cfaf7c665b58 100644 --- a/arch/arm/mach-spear/include/mach/misc_regs.h +++ b/arch/arm/mach-spear/include/mach/misc_regs.h @@ -4,7 +4,7 @@ * Miscellaneous registers definitions for SPEAr3xx machine family * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> + * Viresh Kumar <vireshk@kernel.org> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear/include/mach/spear.h b/arch/arm/mach-spear/include/mach/spear.h index f2d6a0176575..5ed841ccf8a3 100644 --- a/arch/arm/mach-spear/include/mach/spear.h +++ b/arch/arm/mach-spear/include/mach/spear.h @@ -3,7 +3,7 @@ * * Copyright (C) 2009,2012 ST Microelectronics * Rajeev Kumar<rajeev-dlh.kumar@st.com> - * Viresh Kumar <viresh.linux@gmail.com> + * Viresh Kumar <vireshk@kernel.org> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear/include/mach/uncompress.h b/arch/arm/mach-spear/include/mach/uncompress.h index 51b2dc93e4da..8439b9c12edb 100644 --- a/arch/arm/mach-spear/include/mach/uncompress.h +++ b/arch/arm/mach-spear/include/mach/uncompress.h @@ -4,7 +4,7 @@ * Serial port stubs for kernel decompress status messages * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> + * Viresh Kumar <vireshk@kernel.org> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear/pl080.c b/arch/arm/mach-spear/pl080.c index cfa1199d0f4a..b4529f3e0ee9 100644 --- a/arch/arm/mach-spear/pl080.c +++ b/arch/arm/mach-spear/pl080.c @@ -4,7 +4,7 @@ * DMAC pl080 definitions for SPEAr platform * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> + * Viresh Kumar <vireshk@kernel.org> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear/pl080.h b/arch/arm/mach-spear/pl080.h index eb6590ded40d..608dec6725ae 100644 --- a/arch/arm/mach-spear/pl080.h +++ b/arch/arm/mach-spear/pl080.h @@ -4,7 +4,7 @@ * DMAC pl080 definitions for SPEAr platform * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> + * Viresh Kumar <vireshk@kernel.org> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear/restart.c b/arch/arm/mach-spear/restart.c index ce5e098c4888..b4342155a783 100644 --- a/arch/arm/mach-spear/restart.c +++ b/arch/arm/mach-spear/restart.c @@ -4,7 +4,7 @@ * SPEAr platform specific restart functions * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> + * Viresh Kumar <vireshk@kernel.org> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear/spear1310.c b/arch/arm/mach-spear/spear1310.c index d9ce4d8000f0..cd5d375d91f0 100644 --- a/arch/arm/mach-spear/spear1310.c +++ b/arch/arm/mach-spear/spear1310.c @@ -4,7 +4,7 @@ * SPEAr1310 machine source file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> + * Viresh Kumar <vireshk@kernel.org> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear/spear1340.c b/arch/arm/mach-spear/spear1340.c index 3f3c0f124bd3..94594d5a446c 100644 --- a/arch/arm/mach-spear/spear1340.c +++ b/arch/arm/mach-spear/spear1340.c @@ -4,7 +4,7 @@ * SPEAr1340 machine source file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> + * Viresh Kumar <vireshk@kernel.org> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear/spear13xx.c b/arch/arm/mach-spear/spear13xx.c index 2e463a93468d..b7afce6795f4 100644 --- a/arch/arm/mach-spear/spear13xx.c +++ b/arch/arm/mach-spear/spear13xx.c @@ -4,7 +4,7 @@ * SPEAr13XX machines common source file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> + * Viresh Kumar <vireshk@kernel.org> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear/spear300.c b/arch/arm/mach-spear/spear300.c index b52e48f342f4..5b32edda2276 100644 --- a/arch/arm/mach-spear/spear300.c +++ b/arch/arm/mach-spear/spear300.c @@ -4,7 +4,7 @@ * SPEAr300 machine source file * * Copyright (C) 2009-2012 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> + * Viresh Kumar <vireshk@kernel.org> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear/spear310.c b/arch/arm/mach-spear/spear310.c index ed2029db391f..86a44ac7ff67 100644 --- a/arch/arm/mach-spear/spear310.c +++ b/arch/arm/mach-spear/spear310.c @@ -4,7 +4,7 @@ * SPEAr310 machine source file * * Copyright (C) 2009-2012 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> + * Viresh Kumar <vireshk@kernel.org> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear/spear320.c b/arch/arm/mach-spear/spear320.c index bf634b32a930..d45d751926c5 100644 --- a/arch/arm/mach-spear/spear320.c +++ b/arch/arm/mach-spear/spear320.c @@ -4,7 +4,7 @@ * SPEAr320 machine source file * * Copyright (C) 2009-2012 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> + * Viresh Kumar <vireshk@kernel.org> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear/spear3xx.c b/arch/arm/mach-spear/spear3xx.c index bf3b1fd8cb23..23394ac76cf2 100644 --- a/arch/arm/mach-spear/spear3xx.c +++ b/arch/arm/mach-spear/spear3xx.c @@ -4,7 +4,7 @@ * SPEAr3XX machines common source file * * Copyright (C) 2009-2012 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> + * Viresh Kumar <vireshk@kernel.org> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 5d1a318f1302..0fa4c5f8b1be 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -8,6 +8,7 @@ menuconfig ARCH_TEGRA select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select PINCTRL + select PM_OPP select ARCH_HAS_RESET_CONTROLLER select RESET_CONTROLLER select SOC_BUS diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index e31d3d61c998..b316e18a76aa 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -72,21 +72,12 @@ void __init ux500_init_irq(void) * Init clocks here so that they are available for system timer * initialization. */ - if (cpu_is_u8500_family()) { - u8500_of_clk_init(U8500_CLKRST1_BASE, - U8500_CLKRST2_BASE, - U8500_CLKRST3_BASE, - U8500_CLKRST5_BASE, - U8500_CLKRST6_BASE); - } else if (cpu_is_u9540()) { - u9540_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE, - U8500_CLKRST3_BASE, U8500_CLKRST5_BASE, - U8500_CLKRST6_BASE); - } else if (cpu_is_u8540()) { - u8540_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE, - U8500_CLKRST3_BASE, U8500_CLKRST5_BASE, - U8500_CLKRST6_BASE); - } + if (cpu_is_u8500_family()) + u8500_clk_init(); + else if (cpu_is_u9540()) + u9540_clk_init(); + else if (cpu_is_u8540()) + u8540_clk_init(); } static const char * __init ux500_get_machine(void) diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 1ced8a0f7a52..cba12f34ff77 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -1971,7 +1971,7 @@ static int extend_iommu_mapping(struct dma_iommu_mapping *mapping) { int next_bitmap; - if (mapping->nr_bitmaps > mapping->extensions) + if (mapping->nr_bitmaps >= mapping->extensions) return -EINVAL; next_bitmap = mapping->nr_bitmaps; diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 0716bbe19872..de2b246fed38 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -274,7 +274,10 @@ __v7_ca15mp_setup: __v7_b15mp_setup: __v7_ca17mp_setup: mov r10, #0 -1: +1: adr r12, __v7_setup_stack @ the local stack + stmia r12, {r0-r5, lr} @ v7_invalidate_l1 touches r0-r6 + bl v7_invalidate_l1 + ldmia r12, {r0-r5, lr} #ifdef CONFIG_SMP ALT_SMP(mrc p15, 0, r0, c1, c0, 1) ALT_UP(mov r0, #(1 << 6)) @ fake it for UP @@ -283,7 +286,7 @@ __v7_ca17mp_setup: orreq r0, r0, r10 @ Enable CPU-specific SMP bits mcreq p15, 0, r0, c1, c0, 1 #endif - b __v7_setup + b __v7_setup_cont /* * Errata: @@ -413,10 +416,11 @@ __v7_pj4b_setup: __v7_setup: adr r12, __v7_setup_stack @ the local stack - stmia r12, {r0-r5, r7, r9, r11, lr} + stmia r12, {r0-r5, lr} @ v7_invalidate_l1 touches r0-r6 bl v7_invalidate_l1 - ldmia r12, {r0-r5, r7, r9, r11, lr} + ldmia r12, {r0-r5, lr} +__v7_setup_cont: and r0, r9, #0xff000000 @ ARM? teq r0, #0x41000000 bne __errata_finish @@ -480,7 +484,7 @@ ENDPROC(__v7_setup) .align 2 __v7_setup_stack: - .space 4 * 11 @ 11 registers + .space 4 * 7 @ 12 registers __INITDATA diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index 4550d247e308..c011e2296cb1 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -74,32 +74,52 @@ struct jit_ctx { int bpf_jit_enable __read_mostly; -static u64 jit_get_skb_b(struct sk_buff *skb, unsigned offset) +static inline int call_neg_helper(struct sk_buff *skb, int offset, void *ret, + unsigned int size) +{ + void *ptr = bpf_internal_load_pointer_neg_helper(skb, offset, size); + + if (!ptr) + return -EFAULT; + memcpy(ret, ptr, size); + return 0; +} + +static u64 jit_get_skb_b(struct sk_buff *skb, int offset) { u8 ret; int err; - err = skb_copy_bits(skb, offset, &ret, 1); + if (offset < 0) + err = call_neg_helper(skb, offset, &ret, 1); + else + err = skb_copy_bits(skb, offset, &ret, 1); return (u64)err << 32 | ret; } -static u64 jit_get_skb_h(struct sk_buff *skb, unsigned offset) +static u64 jit_get_skb_h(struct sk_buff *skb, int offset) { u16 ret; int err; - err = skb_copy_bits(skb, offset, &ret, 2); + if (offset < 0) + err = call_neg_helper(skb, offset, &ret, 2); + else + err = skb_copy_bits(skb, offset, &ret, 2); return (u64)err << 32 | ntohs(ret); } -static u64 jit_get_skb_w(struct sk_buff *skb, unsigned offset) +static u64 jit_get_skb_w(struct sk_buff *skb, int offset) { u32 ret; int err; - err = skb_copy_bits(skb, offset, &ret, 4); + if (offset < 0) + err = call_neg_helper(skb, offset, &ret, 4); + else + err = skb_copy_bits(skb, offset, &ret, 4); return (u64)err << 32 | ntohl(ret); } @@ -536,9 +556,6 @@ static int build_body(struct jit_ctx *ctx) case BPF_LD | BPF_B | BPF_ABS: load_order = 0; load: - /* the interpreter will deal with the negative K */ - if ((int)k < 0) - return -ENOTSUPP; emit_mov_i(r_off, k, ctx); load_common: ctx->seen |= SEEN_DATA | SEEN_CALL; @@ -547,12 +564,24 @@ load_common: emit(ARM_SUB_I(r_scratch, r_skb_hl, 1 << load_order), ctx); emit(ARM_CMP_R(r_scratch, r_off), ctx); - condt = ARM_COND_HS; + condt = ARM_COND_GE; } else { emit(ARM_CMP_R(r_skb_hl, r_off), ctx); condt = ARM_COND_HI; } + /* + * test for negative offset, only if we are + * currently scheduled to take the fast + * path. this will update the flags so that + * the slowpath instruction are ignored if the + * offset is negative. + * + * for loard_order == 0 the HI condition will + * make loads at offset 0 take the slow path too. + */ + _emit(condt, ARM_CMP_I(r_off, 0), ctx); + _emit(condt, ARM_ADD_R(r_scratch, r_off, r_skb_data), ctx); @@ -860,9 +889,11 @@ b_epilogue: off = offsetof(struct sk_buff, vlan_tci); emit(ARM_LDRH_I(r_A, r_skb, off), ctx); if (code == (BPF_ANC | SKF_AD_VLAN_TAG)) - OP_IMM3(ARM_AND, r_A, r_A, VLAN_VID_MASK, ctx); - else - OP_IMM3(ARM_AND, r_A, r_A, VLAN_TAG_PRESENT, ctx); + OP_IMM3(ARM_AND, r_A, r_A, ~VLAN_TAG_PRESENT, ctx); + else { + OP_IMM3(ARM_LSR, r_A, r_A, 12, ctx); + OP_IMM3(ARM_AND, r_A, r_A, 0x1, ctx); + } break; case BPF_ANC | SKF_AD_QUEUE: ctx->seen |= SEEN_SKB; diff --git a/arch/arm/vdso/Makefile b/arch/arm/vdso/Makefile index 9d259d94e429..1160434eece0 100644 --- a/arch/arm/vdso/Makefile +++ b/arch/arm/vdso/Makefile @@ -14,7 +14,7 @@ VDSO_LDFLAGS += -Wl,-z,max-page-size=4096 -Wl,-z,common-page-size=4096 VDSO_LDFLAGS += -nostdlib -shared VDSO_LDFLAGS += $(call cc-ldoption, -Wl$(comma)--hash-style=sysv) VDSO_LDFLAGS += $(call cc-ldoption, -Wl$(comma)--build-id) -VDSO_LDFLAGS += $(call cc-option, -fuse-ld=bfd) +VDSO_LDFLAGS += $(call cc-ldoption, -fuse-ld=bfd) obj-$(CONFIG_VDSO) += vdso.o extra-$(CONFIG_VDSO) += vdso.lds |