diff options
Diffstat (limited to 'arch/arm')
44 files changed, 177 insertions, 65 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 0fb4b218f665..1b158bbab29a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -5,6 +5,7 @@ config ARM select ARCH_32BIT_OFF_T select ARCH_CORRECT_STACKTRACE_ON_KRETPROBE if HAVE_KRETPROBES && FRAME_POINTER && !ARM_UNWIND select ARCH_HAS_BINFMT_FLAT + select ARCH_HAS_CPU_FINALIZE_INIT if MMU select ARCH_HAS_CURRENT_STACK_POINTER select ARCH_HAS_DEBUG_VIRTUAL if MMU select ARCH_HAS_DMA_WRITE_COMBINE if !ARM_DMA_MEM_BUFFERABLE @@ -124,6 +125,7 @@ config ARM select HAVE_SYSCALL_TRACEPOINTS select HAVE_UID16 select HAVE_VIRT_CPU_ACCOUNTING_GEN + select HOTPLUG_CORE_SYNC_DEAD if HOTPLUG_CPU select IRQ_FORCED_THREADING select MODULES_USE_ELF_REL select NEED_DMA_MAP_STATE diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts index 2fc9a5d5e0c0..625b9b311b49 100644 --- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts +++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts @@ -527,7 +527,7 @@ interrupt-parent = <&gpio1>; interrupts = <31 0>; - pendown-gpio = <&gpio1 31 0>; + pendown-gpio = <&gpio1 31 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <0x0>; diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts index aa5cc0e98bba..217e9b96c61e 100644 --- a/arch/arm/boot/dts/at91-sama7g5ek.dts +++ b/arch/arm/boot/dts/at91-sama7g5ek.dts @@ -792,7 +792,7 @@ }; &shdwc { - atmel,shdwc-debouncer = <976>; + debounce-delay-us = <976>; status = "okay"; input@0 { diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index 88869ca874d1..045cb253f23a 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -156,7 +156,7 @@ compatible = "ti,ads7843"; interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>; spi-max-frequency = <3000000>; - pendown-gpio = <&pioC 2 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&pioC 2 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <150>; ti,x-max = /bits/ 16 <3830>; diff --git a/arch/arm/boot/dts/imx6qdl-mba6.dtsi b/arch/arm/boot/dts/imx6qdl-mba6.dtsi index 78555a618851..7b7e6c2ad190 100644 --- a/arch/arm/boot/dts/imx6qdl-mba6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-mba6.dtsi @@ -209,6 +209,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio6 7 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_pcie>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi b/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi index 5882c7565f64..32a6022625d9 100644 --- a/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi +++ b/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/regulator/dlg,da9063-regulator.h> #include "imx6ull.dtsi" / { @@ -84,16 +85,20 @@ regulators { vdd_soc_in_1v4: buck1 { + regulator-allowed-modes = <DA9063_BUCK_MODE_SLEEP>; /* PFM */ regulator-always-on; regulator-boot-on; + regulator-initial-mode = <DA9063_BUCK_MODE_SLEEP>; regulator-max-microvolt = <1400000>; regulator-min-microvolt = <1400000>; regulator-name = "vdd_soc_in_1v4"; }; vcc_3v3: buck2 { + regulator-allowed-modes = <DA9063_BUCK_MODE_SYNC>; /* PWM */ regulator-always-on; regulator-boot-on; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; regulator-max-microvolt = <3300000>; regulator-min-microvolt = <3300000>; regulator-name = "vcc_3v3"; @@ -106,8 +111,10 @@ * the voltage is set to 1.5V. */ vcc_ddr_1v35: buck3 { + regulator-allowed-modes = <DA9063_BUCK_MODE_SYNC>; /* PWM */ regulator-always-on; regulator-boot-on; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; regulator-max-microvolt = <1500000>; regulator-min-microvolt = <1500000>; regulator-name = "vcc_ddr_1v35"; diff --git a/arch/arm/boot/dts/imx7d-pico-hobbit.dts b/arch/arm/boot/dts/imx7d-pico-hobbit.dts index d917dc4f2f22..6ad39dca7009 100644 --- a/arch/arm/boot/dts/imx7d-pico-hobbit.dts +++ b/arch/arm/boot/dts/imx7d-pico-hobbit.dts @@ -64,7 +64,7 @@ interrupt-parent = <&gpio2>; interrupts = <7 0>; spi-max-frequency = <1000000>; - pendown-gpio = <&gpio2 7 0>; + pendown-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>; vcc-supply = <®_3p3v>; ti,x-min = /bits/ 16 <0>; ti,x-max = /bits/ 16 <4095>; diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index f483bc0afe5e..234e5fc647b2 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -205,7 +205,7 @@ pinctrl-0 = <&pinctrl_tsc2046_pendown>; interrupt-parent = <&gpio2>; interrupts = <29 0>; - pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio2 29 GPIO_ACTIVE_LOW>; touchscreen-max-pressure = <255>; wakeup-source; }; diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index e61b8a2bfb7d..51baedf1603b 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -227,7 +227,7 @@ interrupt-parent = <&gpio2>; interrupts = <25 0>; /* gpio_57 */ - pendown-gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>; diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi index 3decc2d78a6c..a7f99ae0c1fe 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi @@ -54,7 +54,7 @@ interrupt-parent = <&gpio1>; interrupts = <27 0>; /* gpio_27 */ - pendown-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio1 27 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index c595afe4181d..d310b5c7bac3 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -311,7 +311,7 @@ interrupt-parent = <&gpio1>; interrupts = <8 0>; /* boot6 / gpio_8 */ spi-max-frequency = <1000000>; - pendown-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>; vcc-supply = <®_vcc3>; pinctrl-names = "default"; pinctrl-0 = <&tsc2048_pins>; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi index 1d6e88f99eb3..c3570acc35fa 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi @@ -149,7 +149,7 @@ interrupt-parent = <&gpio4>; interrupts = <18 0>; /* gpio_114 */ - pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi index 7e30f9d45790..d95a0e130058 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi @@ -160,7 +160,7 @@ interrupt-parent = <&gpio4>; interrupts = <18 0>; /* gpio_114 */ - pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>; diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi index 559853764487..4c3b6bab179c 100644 --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -651,7 +651,7 @@ pinctrl-0 = <&penirq_pins>; interrupt-parent = <&gpio3>; interrupts = <30 IRQ_TYPE_NONE>; /* GPIO_94 */ - pendown-gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio3 30 GPIO_ACTIVE_LOW>; vcc-supply = <&vaux4>; ti,x-min = /bits/ 16 <0>; diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index 2d87b9fc230e..af288d63a26a 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -354,7 +354,7 @@ interrupt-parent = <&gpio1>; interrupts = <15 0>; /* gpio1_wk15 */ - pendown-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio1 15 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <0x0>; diff --git a/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts index 7a80e1c9f126..aa0e0e8d2a97 100644 --- a/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts +++ b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts @@ -268,7 +268,6 @@ function = "gpio"; drive-strength = <8>; bias-disable; - input-enable; }; wlan_hostwake_default_state: wlan-hostwake-default-state { @@ -276,7 +275,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; wlan_regulator_default_state: wlan-regulator-default-state { diff --git a/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts b/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts index d64096028ab1..5593a3a60d6c 100644 --- a/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts +++ b/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts @@ -352,7 +352,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; wlan_regulator_default_state: wlan-regulator-default-state { diff --git a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts index b82381229adf..b887e5361ec3 100644 --- a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts +++ b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts @@ -307,7 +307,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; touch_pins: touch-state { @@ -317,7 +316,6 @@ drive-strength = <8>; bias-pull-down; - input-enable; }; reset-pins { @@ -335,7 +333,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; wlan_regulator_default_state: wlan-regulator-default-state { diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 672b246afbba..d2289205ff81 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -83,6 +83,7 @@ L2: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; }; idle-states { diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index b653ea40c441..83839e1ec4d1 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -74,6 +74,7 @@ L2: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; qcom,saw = <&saw_l2>; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index dfcfb3339c23..f0ef86fadc9d 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -102,6 +102,7 @@ L2: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; qcom,saw = <&saw_l2>; }; }; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index af6764770fd1..7581845737a8 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -45,6 +45,7 @@ L2: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts index a8304769b509..b269fdca1460 100644 --- a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts +++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts @@ -49,7 +49,6 @@ gpioext1-pins { pins = "gpio2"; function = "gpio"; - input-enable; bias-disable; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index f601b40ebcf4..78023ed2fdf7 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -36,6 +36,7 @@ L2: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index 2a668cd535cc..616fef2ea682 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -42,6 +42,7 @@ L2: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index ab35f2d644c0..861695cecf84 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -592,7 +592,6 @@ pins = "gpio73"; function = "gpio"; bias-disable; - input-enable; }; touch_pin: touch-state { @@ -602,7 +601,6 @@ drive-strength = <2>; bias-disable; - input-enable; }; reset-pins { diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi index d3bec03b126c..68a2f9094e53 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi @@ -433,7 +433,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; sdc1_on: sdc1-on-state { diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 8208012684d4..7ed0d925a4e9 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -80,6 +80,7 @@ L2: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; qcom,saw = <&saw_l2>; }; diff --git a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts index 8d2a054d8fee..8230d0e1d95d 100644 --- a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts +++ b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts @@ -461,7 +461,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; reset-pins { diff --git a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts index b9698ffb66ca..eb505d6d7f31 100644 --- a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts +++ b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts @@ -704,7 +704,6 @@ pins = "gpio75"; function = "gpio"; drive-strength = <16>; - input-enable; }; devwake-pins { @@ -760,14 +759,12 @@ i2c_touchkey_pins: i2c-touchkey-state { pins = "gpio95", "gpio96"; function = "gpio"; - input-enable; bias-pull-up; }; i2c_led_gpioex_pins: i2c-led-gpioex-state { pins = "gpio120", "gpio121"; function = "gpio"; - input-enable; bias-pull-down; }; @@ -781,7 +778,6 @@ wifi_pin: wifi-state { pins = "gpio92"; function = "gpio"; - input-enable; bias-pull-down; }; diff --git a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts index 04bc58d87abf..0f650ed31005 100644 --- a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts +++ b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts @@ -631,7 +631,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; bt_host_wake_pin: bt-host-wake-state { diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index c9e05e3540d6..00bf53f99c29 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -387,6 +387,7 @@ interrupt-names = "tx", "rx0", "rx1", "sce"; resets = <&rcc STM32F4_APB1_RESET(CAN2)>; clocks = <&rcc 0 STM32F4_APB1_CLOCK(CAN2)>; + st,can-secondary; st,gcan = <&gcan>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi index c8e6c52fb248..9f65403295ca 100644 --- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi @@ -283,6 +283,88 @@ slew-rate = <2>; }; }; + + can1_pins_a: can1-0 { + pins1 { + pinmux = <STM32_PINMUX('A', 12, AF9)>; /* CAN1_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('A', 11, AF9)>; /* CAN1_RX */ + bias-pull-up; + }; + }; + + can1_pins_b: can1-1 { + pins1 { + pinmux = <STM32_PINMUX('B', 9, AF9)>; /* CAN1_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 8, AF9)>; /* CAN1_RX */ + bias-pull-up; + }; + }; + + can1_pins_c: can1-2 { + pins1 { + pinmux = <STM32_PINMUX('D', 1, AF9)>; /* CAN1_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('D', 0, AF9)>; /* CAN1_RX */ + bias-pull-up; + + }; + }; + + can1_pins_d: can1-3 { + pins1 { + pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('H', 14, AF9)>; /* CAN1_RX */ + bias-pull-up; + + }; + }; + + can2_pins_a: can2-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 6, AF9)>; /* CAN2_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 5, AF9)>; /* CAN2_RX */ + bias-pull-up; + }; + }; + + can2_pins_b: can2-1 { + pins1 { + pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 12, AF9)>; /* CAN2_RX */ + bias-pull-up; + }; + }; + + can3_pins_a: can3-0 { + pins1 { + pinmux = <STM32_PINMUX('A', 15, AF11)>; /* CAN3_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('A', 8, AF11)>; /* CAN3_RX */ + bias-pull-up; + }; + }; + + can3_pins_b: can3-1 { + pins1 { + pinmux = <STM32_PINMUX('B', 4, AF11)>; /* CAN3_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 3, AF11)>; /* CAN3_RX */ + bias-pull-up; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts index 3b88209bacea..ff1f9a1bcfcf 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts @@ -132,6 +132,7 @@ reg = <0x2c0f0000 0x1000>; interrupts = <0 84 4>; cache-level = <2>; + cache-unified; }; pmu { diff --git a/arch/arm/include/asm/arm_pmuv3.h b/arch/arm/include/asm/arm_pmuv3.h index 78d3d4b82c6c..f3cd04ff022d 100644 --- a/arch/arm/include/asm/arm_pmuv3.h +++ b/arch/arm/include/asm/arm_pmuv3.h @@ -92,7 +92,7 @@ #define RETURN_READ_PMEVCNTRN(n) \ return read_sysreg(PMEVCNTR##n) -static unsigned long read_pmevcntrn(int n) +static inline unsigned long read_pmevcntrn(int n) { PMEVN_SWITCH(n, RETURN_READ_PMEVCNTRN); return 0; @@ -100,14 +100,14 @@ static unsigned long read_pmevcntrn(int n) #define WRITE_PMEVCNTRN(n) \ write_sysreg(val, PMEVCNTR##n) -static void write_pmevcntrn(int n, unsigned long val) +static inline void write_pmevcntrn(int n, unsigned long val) { PMEVN_SWITCH(n, WRITE_PMEVCNTRN); } #define WRITE_PMEVTYPERN(n) \ write_sysreg(val, PMEVTYPER##n) -static void write_pmevtypern(int n, unsigned long val) +static inline void write_pmevtypern(int n, unsigned long val) { PMEVN_SWITCH(n, WRITE_PMEVTYPERN); } @@ -222,6 +222,11 @@ static inline bool kvm_pmu_counter_deferred(struct perf_event_attr *attr) return false; } +static inline bool kvm_set_pmuserenr(u64 val) +{ + return false; +} + /* PMU Version in DFR Register */ #define ARMV8_PMU_DFR_VER_NI 0 #define ARMV8_PMU_DFR_VER_V3P4 0x5 diff --git a/arch/arm/include/asm/bugs.h b/arch/arm/include/asm/bugs.h index 97a312ba0840..fe385551edec 100644 --- a/arch/arm/include/asm/bugs.h +++ b/arch/arm/include/asm/bugs.h @@ -1,7 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0-only */ /* - * arch/arm/include/asm/bugs.h - * * Copyright (C) 1995-2003 Russell King */ #ifndef __ASM_BUGS_H @@ -10,10 +8,8 @@ extern void check_writebuffer_bugs(void); #ifdef CONFIG_MMU -extern void check_bugs(void); extern void check_other_bugs(void); #else -#define check_bugs() do { } while (0) #define check_other_bugs() do { } while (0) #endif diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index 7c1c90d9f582..8c05a7f374d8 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -64,7 +64,7 @@ extern void secondary_startup_arm(void); extern int __cpu_disable(void); -extern void __cpu_die(unsigned int cpu); +static inline void __cpu_die(unsigned int cpu) { } extern void arch_send_call_function_single_ipi(int cpu); extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); diff --git a/arch/arm/kernel/bugs.c b/arch/arm/kernel/bugs.c index 14c8dbbb7d2d..087bce6ec8e9 100644 --- a/arch/arm/kernel/bugs.c +++ b/arch/arm/kernel/bugs.c @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include <linux/init.h> +#include <linux/cpu.h> #include <asm/bugs.h> #include <asm/proc-fns.h> @@ -11,7 +12,7 @@ void check_other_bugs(void) #endif } -void __init check_bugs(void) +void __init arch_cpu_finalize_init(void) { check_writebuffer_bugs(); check_other_bugs(); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 87f8d0e5e314..6756203e45f3 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -288,15 +288,11 @@ int __cpu_disable(void) } /* - * called on the thread which is asking for a CPU to be shutdown - - * waits until shutdown has completed, or it is timed out. + * called on the thread which is asking for a CPU to be shutdown after the + * shutdown completed. */ -void __cpu_die(unsigned int cpu) +void arch_cpuhp_cleanup_dead_cpu(unsigned int cpu) { - if (!cpu_wait_death(cpu, 5)) { - pr_err("CPU%u: cpu didn't die\n", cpu); - return; - } pr_debug("CPU%u: shutdown\n", cpu); clear_tasks_mm_cpumask(cpu); @@ -336,11 +332,11 @@ void __noreturn arch_cpu_idle_dead(void) flush_cache_louis(); /* - * Tell __cpu_die() that this CPU is now safe to dispose of. Once - * this returns, power and/or clocks can be removed at any point - * from this CPU and its cache by platform_cpu_kill(). + * Tell cpuhp_bp_sync_dead() that this CPU is now safe to dispose + * of. Once this returns, power and/or clocks can be removed at + * any point from this CPU and its cache by platform_cpu_kill(). */ - (void)cpu_report_death(); + cpuhp_ap_report_dead(); /* * Ensure that the cache lines associated with that completion are diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index 53be7ea6181b..9d2192156087 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -308,6 +308,29 @@ static int unwind_exec_pop_subset_r0_to_r3(struct unwind_ctrl_block *ctrl, return URC_OK; } +static unsigned long unwind_decode_uleb128(struct unwind_ctrl_block *ctrl) +{ + unsigned long bytes = 0; + unsigned long insn; + unsigned long result = 0; + + /* + * unwind_get_byte() will advance `ctrl` one instruction at a time, so + * loop until we get an instruction byte where bit 7 is not set. + * + * Note: This decodes a maximum of 4 bytes to output 28 bits data where + * max is 0xfffffff: that will cover a vsp increment of 1073742336, hence + * it is sufficient for unwinding the stack. + */ + do { + insn = unwind_get_byte(ctrl); + result |= (insn & 0x7f) << (bytes * 7); + bytes++; + } while (!!(insn & 0x80) && (bytes != sizeof(result))); + + return result; +} + /* * Execute the current unwind instruction. */ @@ -361,7 +384,7 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl) if (ret) goto error; } else if (insn == 0xb2) { - unsigned long uleb128 = unwind_get_byte(ctrl); + unsigned long uleb128 = unwind_decode_uleb128(ctrl); ctrl->vrs[SP] += 0x204 + (uleb128 << 2); } else { diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 60dc56d8acfb..437dd0352fd4 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -334,16 +334,14 @@ static bool at91_pm_eth_quirk_is_valid(struct at91_pm_quirk_eth *eth) pdev = of_find_device_by_node(eth->np); if (!pdev) return false; + /* put_device(eth->dev) is called at the end of suspend. */ eth->dev = &pdev->dev; } /* No quirks if device isn't a wakeup source. */ - if (!device_may_wakeup(eth->dev)) { - put_device(eth->dev); + if (!device_may_wakeup(eth->dev)) return false; - } - /* put_device(eth->dev) is called at the end of suspend. */ return true; } @@ -439,14 +437,14 @@ clk_unconfigure: pr_err("AT91: PM: failed to enable %s clocks\n", j == AT91_PM_G_ETH ? "geth" : "eth"); } - } else { - /* - * Release the reference to eth->dev taken in - * at91_pm_eth_quirk_is_valid(). - */ - put_device(eth->dev); - eth->dev = NULL; } + + /* + * Release the reference to eth->dev taken in + * at91_pm_eth_quirk_is_valid(). + */ + put_device(eth->dev); + eth->dev = NULL; } return ret; diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c index 67f72ca984b2..1956b095e699 100644 --- a/arch/arm/mach-sa1100/jornada720_ssp.c +++ b/arch/arm/mach-sa1100/jornada720_ssp.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0-only -/** +/* * arch/arm/mac-sa1100/jornada720_ssp.c * * Copyright (C) 2006/2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com> @@ -26,6 +26,7 @@ static unsigned long jornada_ssp_flags; /** * jornada_ssp_reverse - reverses input byte + * @byte: input byte to reverse * * we need to reverse all data we receive from the mcu due to its physical location * returns : 01110111 -> 11101110 @@ -46,6 +47,7 @@ EXPORT_SYMBOL(jornada_ssp_reverse); /** * jornada_ssp_byte - waits for ready ssp bus and sends byte + * @byte: input byte to transmit * * waits for fifo buffer to clear and then transmits, if it doesn't then we will * timeout after <timeout> rounds. Needs mcu running before its called. @@ -77,6 +79,7 @@ EXPORT_SYMBOL(jornada_ssp_byte); /** * jornada_ssp_inout - decide if input is command or trading byte + * @byte: input byte to send (may be %TXDUMMY) * * returns : (jornada_ssp_byte(byte)) on success * : %-ETIMEDOUT on timeout failure diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S index 7483ef8bccda..62206ef25037 100644 --- a/arch/arm/vfp/entry.S +++ b/arch/arm/vfp/entry.S @@ -23,6 +23,9 @@ @ ENTRY(do_vfp) mov r1, r10 - mov r3, r9 - b vfp_entry + str lr, [sp, #-8]! + add r3, sp, #4 + str r9, [r3] + bl vfp_entry + ldr pc, [sp], #8 ENDPROC(do_vfp) diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index 4d8478264d82..a4610d0f3215 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -172,13 +172,14 @@ vfp_hw_state_valid: @ out before setting an FPEXC that @ stops us reading stuff VFPFMXR FPEXC, r1 @ Restore FPEXC last + mov sp, r3 @ we think we have handled things + pop {lr} sub r2, r2, #4 @ Retry current instruction - if Thumb str r2, [sp, #S_PC] @ mode it's two 16-bit instructions, @ else it's one 32-bit instruction, so @ always subtract 4 from the following @ instruction address. - mov lr, r3 @ we think we have handled things local_bh_enable_and_ret: adr r0, . mov r1, #SOFTIRQ_DISABLE_OFFSET @@ -209,8 +210,9 @@ skip: process_exception: DBGSTR "bounce" + mov sp, r3 @ setup for a return to the user code. + pop {lr} mov r2, sp @ nothing stacked - regdump is at TOS - mov lr, r3 @ setup for a return to the user code. @ Now call the C code to package up the bounce to the support code @ r0 holds the trigger instruction |