diff options
Diffstat (limited to 'arch/arm')
413 files changed, 12455 insertions, 9883 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 2424d1648c65..853aab5ab327 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -103,7 +103,6 @@ config ARM select HAVE_KRETPROBES if HAVE_KPROBES select HAVE_MOD_ARCH_SPECIFIC select HAVE_NMI - select HAVE_OPROFILE if HAVE_PERF_EVENTS select HAVE_OPTPROBES if !THUMB2_KERNEL select HAVE_PERF_EVENTS select HAVE_PERF_REGS @@ -672,10 +671,6 @@ source "arch/arm/mach-orion5x/Kconfig" source "arch/arm/mach-oxnas/Kconfig" -source "arch/arm/mach-picoxcell/Kconfig" - -source "arch/arm/mach-prima2/Kconfig" - source "arch/arm/mach-pxa/Kconfig" source "arch/arm/plat-pxa/Kconfig" @@ -707,12 +702,8 @@ source "arch/arm/mach-stm32/Kconfig" source "arch/arm/mach-sunxi/Kconfig" -source "arch/arm/mach-tango/Kconfig" - source "arch/arm/mach-tegra/Kconfig" -source "arch/arm/mach-u300/Kconfig" - source "arch/arm/mach-uniphier/Kconfig" source "arch/arm/mach-ux500/Kconfig" @@ -723,19 +714,9 @@ source "arch/arm/mach-vexpress/Kconfig" source "arch/arm/mach-vt8500/Kconfig" -source "arch/arm/mach-zx/Kconfig" - source "arch/arm/mach-zynq/Kconfig" # ARMv7-M architecture -config ARCH_EFM32 - bool "Energy Micro efm32" - depends on ARM_SINGLE_ARMV7M - select GPIOLIB - help - Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko - processors. - config ARCH_LPC18XX bool "NXP LPC18xx/LPC43xx" depends on ARM_SINGLE_ARMV7M @@ -1553,7 +1534,7 @@ config ARM_MODULE_PLTS config FORCE_MAX_ZONEORDER int "Maximum zone order" default "12" if SOC_AM33XX - default "9" if SA1111 || ARCH_EFM32 + default "9" if SA1111 default "11" help The kernel memory allocator divides physically contiguous memory diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 7a8697a97c98..9e0b5e7f12af 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -770,14 +770,6 @@ choice depends on ARCH_OMAP2PLUS select DEBUG_OMAP2PLUS_UART - config DEBUG_PICOXCELL_UART - depends on ARCH_PICOXCELL - bool "Use PicoXcell UART for low-level debug" - select DEBUG_UART_8250 - help - Say Y here if you want kernel low-level debugging support - on PicoXcell based platforms. - config DEBUG_PXA_UART1 depends on ARCH_PXA bool "Use PXA UART1 for low-level debug" @@ -1150,32 +1142,6 @@ choice Say Y here if you want kernel low-level debugging support on Allwinner A31/A23 based platforms on the R_UART. - config DEBUG_SIRFPRIMA2_UART1 - bool "Kernel low-level debugging messages via SiRFprimaII UART1" - depends on ARCH_PRIMA2 - select DEBUG_SIRFSOC_UART - help - Say Y here if you want the debug print routines to direct - their output to the uart1 port on SiRFprimaII devices. - - config DEBUG_SIRFATLAS7_UART0 - bool "Kernel low-level debugging messages via SiRFatlas7 UART0" - depends on ARCH_ATLAS7 - select DEBUG_SIRFSOC_UART - help - Say Y here if you want the debug print routines to direct - their output to the uart0 port on SiRFATLAS7 devices.The uart0 - is used on SiRFATLAS7 as a extra debug port.sometimes an extra - debug port can be very useful. - - config DEBUG_SIRFATLAS7_UART1 - bool "Kernel low-level debugging messages via SiRFatlas7 UART1" - depends on ARCH_ATLAS7 - select DEBUG_SIRFSOC_UART - help - Say Y here if you want the debug print routines to direct - their output to the uart1 port on SiRFATLAS7 devices. - config DEBUG_SPEAR3XX bool "Kernel low-level debugging messages via ST SPEAr 3xx/6xx UART" depends on ARCH_SPEAR3XX || ARCH_SPEAR6XX @@ -1322,14 +1288,6 @@ choice Say Y here if you want kernel low-level debugging support on Tegra based platforms. - config DEBUG_U300_UART - bool "Kernel low-level debugging messages via U300 UART0" - depends on ARCH_U300 - select DEBUG_UART_PL01X - help - Say Y here if you want the debug print routines to direct - their output to the uart port on U300 devices. - config DEBUG_UX500_UART depends on ARCH_U8500 bool "Use Ux500 UART for low-level debug" @@ -1395,18 +1353,6 @@ choice This option selects UART0 on VIA/Wondermedia System-on-a-chip devices, including VT8500, WM8505, WM8650 and WM8850. - config DEBUG_ZTE_ZX - bool "Use ZTE ZX UART" - select DEBUG_UART_PL01X - depends on ARCH_ZX - help - Say Y here if you are enabling ZTE ZX296702 SOC and need - debug uart support. - - This option is preferred over the platform specific - options; the platform specific options are deprecated - and will be soon removed. - config DEBUG_ZYNQ_UART0 bool "Kernel low-level debugging on Xilinx Zynq using UART0" depends on ARCH_ZYNQ @@ -1464,20 +1410,6 @@ choice options; the platform specific options are deprecated and will be soon removed. - config DEBUG_LL_UART_EFM32 - bool "Kernel low-level debugging via efm32 UART" - depends on ARCH_EFM32 - help - Say Y here if you want the debug print routines to direct - their output to an UART or USART port on efm32 based - machines. Use the following addresses for DEBUG_UART_PHYS: - - 0x4000c000 | USART0 - 0x4000c400 | USART1 - 0x4000c800 | USART2 - 0x4000e000 | UART0 - 0x4000e400 | UART1 - config DEBUG_LL_UART_PL01X bool "Kernel low-level debugging via ARM Ltd PL01x Primecell UART" help @@ -1564,10 +1496,6 @@ config DEBUG_STM32_UART bool depends on ARCH_STM32 -config DEBUG_SIRFSOC_UART - bool - depends on ARCH_SIRF - config DEBUG_UART_FLOW_CONTROL bool "Enable flow control (CTS) for the debug UART" depends on DEBUG_LL @@ -1591,7 +1519,6 @@ config DEBUG_LL_INCLUDE default "debug/meson.S" if DEBUG_MESON_UARTAO default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X default "debug/exynos.S" if DEBUG_EXYNOS_UART - default "debug/efm32.S" if DEBUG_LL_UART_EFM32 default "debug/icedcc.S" if DEBUG_ICEDCC default "debug/imx.S" if DEBUG_IMX1_UART || \ DEBUG_IMX25_UART || \ @@ -1623,7 +1550,6 @@ config DEBUG_LL_INCLUDE default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4 default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART || DEBUG_S3C64XX_UART default "debug/s5pv210.S" if DEBUG_S5PV210_UART - default "debug/sirf.S" if DEBUG_SIRFSOC_UART default "debug/sti.S" if DEBUG_STIH41X_ASC2 default "debug/sti.S" if DEBUG_STIH41X_SBC_ASC1 default "debug/sti.S" if DEBUG_STIH418_SBC_ASC0 @@ -1659,7 +1585,6 @@ config DEBUG_UART_PHYS default 0x02531000 if DEBUG_KEYSTONE_UART1 default 0x03010fe0 if ARCH_RPC default 0x07000000 if DEBUG_SUN9I_UART0 - default 0x09405000 if DEBUG_ZTE_ZX default 0x09530000 if DEBUG_STIH418_SBC_ASC0 default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \ DEBUG_VEXPRESS_UART0_CA9 @@ -1678,8 +1603,6 @@ config DEBUG_UART_PHYS default 0x1600d000 if DEBUG_SD5203_UART default 0x18000300 if DEBUG_BCM_5301X default 0x18000400 if DEBUG_BCM_HR2 - default 0x18010000 if DEBUG_SIRFATLAS7_UART0 - default 0x18020000 if DEBUG_SIRFATLAS7_UART1 default 0x18023000 if DEBUG_BCM_IPROC_UART3 default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1 default 0x20001000 if DEBUG_HIP01_UART @@ -1689,7 +1612,6 @@ config DEBUG_UART_PHYS default 0x20201000 if DEBUG_BCM2835 default 0x3e000000 if DEBUG_BCM_KONA_UART default 0x3f201000 if DEBUG_BCM2836 - default 0x4000e400 if DEBUG_LL_UART_EFM32 default 0x40010000 if STM32MP1_DEBUG_UART default 0x40011000 if STM32F4_DEBUG_UART || STM32F7_DEBUG_UART || \ STM32H7_DEBUG_UART @@ -1724,12 +1646,9 @@ config DEBUG_UART_PHYS default 0x80010000 if DEBUG_ASM9260_UART default 0x80070000 if DEBUG_IMX23_UART default 0x80074000 if DEBUG_IMX28_UART - default 0x80230000 if DEBUG_PICOXCELL_UART default 0x808c0000 if DEBUG_EP93XX || ARCH_EP93XX default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART - default 0xb0060000 if DEBUG_SIRFPRIMA2_UART1 default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX - default 0xc0013000 if DEBUG_U300_UART default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN default 0xd0000000 if DEBUG_SPEAR3XX @@ -1777,7 +1696,6 @@ config DEBUG_UART_PHYS default 0xfffff200 if DEBUG_AT91_RM9200_DBGU depends on ARCH_EP93XX || \ DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ - DEBUG_LL_UART_EFM32 || \ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \ DEBUG_R7S9210_SCIF2 || DEBUG_R7S9210_SCIF4 || \ @@ -1789,7 +1707,7 @@ config DEBUG_UART_PHYS DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \ DEBUG_S3C64XX_UART || \ DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ - DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \ + DEBUG_DIGICOLOR_UA0 || \ DEBUG_AT91_UART || DEBUG_STM32_UART || \ DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \ DEBUG_STIH418_SBC_ASC0 @@ -1854,7 +1772,6 @@ config DEBUG_UART_VIRT default 0xfb020000 if DEBUG_OMAP3UART3 default 0xfb042000 if DEBUG_OMAP3UART4 default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT - default 0xfc705000 if DEBUG_ZTE_ZX default 0xfcfe8600 if DEBUG_BCM63XX_UART default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX default 0xfd531000 if DEBUG_STIH41X_SBC_ASC1 @@ -1864,7 +1781,6 @@ config DEBUG_UART_VIRT default 0xfe017000 if DEBUG_MMP_UART2 default 0xfe018000 if DEBUG_MMP_UART3 default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART - default 0xfe230000 if DEBUG_PICOXCELL_UART default 0xfe300000 if DEBUG_BCM_KONA_UART default 0xfe800000 if ARCH_IOP32X default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HIX5HD2_UART @@ -1877,10 +1793,7 @@ config DEBUG_UART_VIRT default 0xfec03000 if DEBUG_SOCFPGA_CYCLONE5_UART1 default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE - default 0xfec10000 if DEBUG_SIRFATLAS7_UART0 default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0 - default 0xfec20000 if DEBUG_SIRFATLAS7_UART1 - default 0xfec60000 if DEBUG_SIRFPRIMA2_UART1 default 0xfec90000 if DEBUG_RK32_UART2 default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1 default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_SD5203_UART @@ -1896,7 +1809,6 @@ config DEBUG_UART_VIRT default 0xfefb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1 default 0xfefb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2 default 0xfefb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3 - default 0xff003000 if DEBUG_U300_UART default 0xffd01000 if DEBUG_HIP01_UART default DEBUG_UART_PHYS if !MMU depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ @@ -1904,7 +1816,7 @@ config DEBUG_UART_VIRT DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \ DEBUG_S3C64XX_UART || \ DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ - DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \ + DEBUG_DIGICOLOR_UA0 || \ DEBUG_AT91_UART || DEBUG_STM32_UART || \ DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \ DEBUG_STIH418_SBC_ASC0 @@ -1921,8 +1833,7 @@ config DEBUG_UART_8250_WORD bool "Use 32-bit accesses for 8250 UART" depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 depends on DEBUG_UART_8250_SHIFT >= 2 - default y if DEBUG_PICOXCELL_UART || \ - DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_ARRIA10_UART1 || \ + default y if DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_ARRIA10_UART1 || \ DEBUG_SOCFPGA_CYCLONE5_UART1 || DEBUG_KEYSTONE_UART0 || \ DEBUG_KEYSTONE_UART1 || DEBUG_ALPINE_UART0 || \ DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \ diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 4aaec9599e8a..dad5502ecc28 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -168,7 +168,6 @@ machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx machine-$(CONFIG_ARCH_DAVINCI) += davinci machine-$(CONFIG_ARCH_DIGICOLOR) += digicolor machine-$(CONFIG_ARCH_DOVE) += dove -machine-$(CONFIG_ARCH_EFM32) += efm32 machine-$(CONFIG_ARCH_EP93XX) += ep93xx machine-$(CONFIG_ARCH_EXYNOS) += exynos machine-$(CONFIG_ARCH_FOOTBRIDGE) += footbridge @@ -199,7 +198,6 @@ machine-$(CONFIG_ARCH_OXNAS) += oxnas machine-$(CONFIG_ARCH_OMAP1) += omap1 machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2 machine-$(CONFIG_ARCH_ORION5X) += orion5x -machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell machine-$(CONFIG_ARCH_PXA) += pxa machine-$(CONFIG_ARCH_QCOM) += qcom machine-$(CONFIG_ARCH_RDA) += rda @@ -211,19 +209,15 @@ machine-$(CONFIG_PLAT_SAMSUNG) += s3c machine-$(CONFIG_ARCH_S5PV210) += s5pv210 machine-$(CONFIG_ARCH_SA1100) += sa1100 machine-$(CONFIG_ARCH_RENESAS) += shmobile -machine-$(CONFIG_ARCH_SIRF) += prima2 machine-$(CONFIG_ARCH_SOCFPGA) += socfpga machine-$(CONFIG_ARCH_STI) += sti machine-$(CONFIG_ARCH_STM32) += stm32 machine-$(CONFIG_ARCH_SUNXI) += sunxi -machine-$(CONFIG_ARCH_TANGO) += tango machine-$(CONFIG_ARCH_TEGRA) += tegra -machine-$(CONFIG_ARCH_U300) += u300 machine-$(CONFIG_ARCH_U8500) += ux500 machine-$(CONFIG_ARCH_VERSATILE) += versatile machine-$(CONFIG_ARCH_VEXPRESS) += vexpress machine-$(CONFIG_ARCH_VT8500) += vt8500 -machine-$(CONFIG_ARCH_ZX) += zx machine-$(CONFIG_ARCH_ZYNQ) += zynq machine-$(CONFIG_PLAT_SPEAR) += spear @@ -266,8 +260,6 @@ core-y += $(machdirs) $(platdirs) core- += $(patsubst %,arch/arm/mach-%/, $(machine-)) core- += $(patsubst %,arch/arm/plat-%/, $(plat-)) -drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/ - libs-y := arch/arm/lib/ $(libs-y) # Default target when executing plain make diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c index 8452753efebe..31927d2fe297 100644 --- a/arch/arm/boot/compressed/atags_to_fdt.c +++ b/arch/arm/boot/compressed/atags_to_fdt.c @@ -15,7 +15,8 @@ static int node_offset(void *fdt, const char *node_path) { int offset = fdt_path_offset(fdt, node_path); if (offset == -FDT_ERR_NOTFOUND) - offset = fdt_add_subnode(fdt, 0, node_path); + /* Add the node to root if not found, dropping the leading '/' */ + offset = fdt_add_subnode(fdt, 0, node_path + 1); return offset; } diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 3d1ea0b25168..8e5d4ab4e75e 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -74,10 +74,6 @@ dtb-$(CONFIG_SOC_SAM_V7) += \ at91-sama5d4_xplained.dtb \ at91-sama5d4ek.dtb \ at91-vinco.dtb -dtb-$(CONFIG_ARCH_ATLAS6) += \ - atlas6-evb.dtb -dtb-$(CONFIG_ARCH_ATLAS7) += \ - atlas7-evb.dtb dtb-$(CONFIG_ARCH_AXXIA) += \ axm5516-amarillo.dtb dtb-$(CONFIG_ARCH_BCM2835) += \ @@ -177,8 +173,6 @@ dtb-$(CONFIG_ARCH_DAVINCI) += \ da850-lego-ev3.dtb dtb-$(CONFIG_ARCH_DIGICOLOR) += \ cx92755_equinox.dtb -dtb-$(CONFIG_ARCH_EFM32) += \ - efm32gg-dk3750.dtb dtb-$(CONFIG_ARCH_EXYNOS3) += \ exynos3250-artik5-eval.dtb \ exynos3250-monk.dtb \ @@ -465,6 +459,9 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-pico-hobbit.dtb \ imx6dl-pico-nymph.dtb \ imx6dl-pico-pi.dtb \ + imx6dl-plybas.dtb \ + imx6dl-plym2m.dtb \ + imx6dl-prtmvt.dtb \ imx6dl-prtrvt.dtb \ imx6dl-prtvt7.dtb \ imx6dl-rex-basic.dtb \ @@ -487,6 +484,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-tx6u-811x.dtb \ imx6dl-tx6u-81xx-mb7.dtb \ imx6dl-udoo.dtb \ + imx6dl-victgo.dtb \ + imx6dl-vicut1.dtb \ imx6dl-wandboard.dtb \ imx6dl-wandboard-revb1.dtb \ imx6dl-wandboard-revd1.dtb \ @@ -580,6 +579,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-udoo.dtb \ imx6q-utilite-pro.dtb \ imx6q-var-dt6customboard.dtb \ + imx6q-vicut1.dtb \ imx6q-wandboard.dtb \ imx6q-wandboard-revb1.dtb \ imx6q-wandboard-revd1.dtb \ @@ -594,6 +594,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6qp-tx6qp-8037-mb7.dtb \ imx6qp-tx6qp-8137.dtb \ imx6qp-tx6qp-8137-mb7.dtb \ + imx6qp-vicutp.dtb \ imx6qp-wandboard-revd1.dtb \ imx6qp-zii-rdu2.dtb dtb-$(CONFIG_SOC_IMX6SL) += \ @@ -631,6 +632,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-pico-pi.dtb \ imx6ul-phytec-segin-ff-rdk-emmc.dtb \ imx6ul-phytec-segin-ff-rdk-nand.dtb \ + imx6ul-prti6g.dtb \ imx6ul-tx6ul-0010.dtb \ imx6ul-tx6ul-0011.dtb \ imx6ul-tx6ul-mainboard.dtb \ @@ -817,6 +819,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-lxm.dtb \ am335x-moxa-uc-2101.dtb \ am335x-moxa-uc-8100-me-t.dtb \ + am335x-myirtech-myd.dtb \ am335x-nano.dtb \ am335x-netcan-plus-1xx.dtb \ am335x-netcom-plus-2xx.dtb \ @@ -888,11 +891,6 @@ dtb-$(CONFIG_ARCH_ACTIONS) += \ owl-s500-labrador-base-m.dtb \ owl-s500-roseapplepi.dtb \ owl-s500-sparky.dtb -dtb-$(CONFIG_ARCH_PICOXCELL) += \ - picoxcell-pc7302-pc3x2.dtb \ - picoxcell-pc7302-pc3x3.dtb -dtb-$(CONFIG_ARCH_PRIMA2) += \ - prima2-evb.dtb dtb-$(CONFIG_ARCH_PXA) += \ pxa300-raumfeld-connector.dtb \ pxa300-raumfeld-controller.dtb \ @@ -912,6 +910,9 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ + qcom-ipq4018-ap120c-ac.dtb \ + qcom-ipq4018-ap120c-ac-bit.dtb \ + qcom-ipq4018-jalapeno.dtb \ qcom-ipq4019-ap.dk01.1-c1.dtb \ qcom-ipq4019-ap.dk04.1-c1.dtb \ qcom-ipq4019-ap.dk04.1-c3.dtb \ @@ -927,7 +928,8 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-msm8974-sony-xperia-amami.dtb \ qcom-msm8974-sony-xperia-castor.dtb \ qcom-msm8974-sony-xperia-honami.dtb \ - qcom-mdm9615-wp8548-mangoh-green.dtb + qcom-mdm9615-wp8548-mangoh-green.dtb \ + qcom-sdx55-mtp.dtb dtb-$(CONFIG_ARCH_RDA) += \ rda8810pl-orangepi-2g-iot.dtb \ rda8810pl-orangepi-i96.dtb @@ -1224,6 +1226,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-s3-lichee-zero-plus.dtb \ sun8i-s3-pinecube.dtb \ sun8i-t3-cqa3t-bv3.dtb \ + sun8i-v3-sl631-imx179.dtb \ sun8i-v3s-licheepi-zero.dtb \ sun8i-v3s-licheepi-zero-dock.dtb \ sun8i-v40-bananapi-m2-berry.dtb @@ -1232,8 +1235,6 @@ dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-cubieboard4.dtb dtb-$(CONFIG_MACH_SUNIV) += \ suniv-f1c100s-licheepi-nano.dtb -dtb-$(CONFIG_ARCH_TANGO) += \ - tango4-vantage-1172.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \ tegra20-acer-a500-picasso.dtb \ tegra20-harmony.dtb \ @@ -1268,8 +1269,6 @@ dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \ tegra124-nyan-big.dtb \ tegra124-nyan-blaze.dtb \ tegra124-venice2.dtb -dtb-$(CONFIG_ARCH_U300) += \ - ste-u300.dtb dtb-$(CONFIG_ARCH_U8500) += \ ste-snowball.dtb \ ste-hrefprev60-stuib.dtb \ @@ -1278,6 +1277,7 @@ dtb-$(CONFIG_ARCH_U8500) += \ ste-hrefv60plus-tvk.dtb \ ste-href520-tvk.dtb \ ste-ux500-samsung-golden.dtb \ + ste-ux500-samsung-janice.dtb \ ste-ux500-samsung-skomer.dtb dtb-$(CONFIG_ARCH_UNIPHIER) += \ uniphier-ld4-ref.dtb \ @@ -1307,6 +1307,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \ wm8850-w70v2.dtb dtb-$(CONFIG_ARCH_ZYNQ) += \ zynq-cc108.dtb \ + zynq-ebaz4205.dtb \ zynq-microzed.dtb \ zynq-parallella.dtb \ zynq-zc702.dtb \ @@ -1398,11 +1399,11 @@ dtb-$(CONFIG_ARCH_MSTARV7) += \ mstar-infinity2m-ssd202d-ssd201htv2.dtb \ mstar-infinity3-msc313e-breadbee.dtb \ mstar-mercury5-ssc8336n-midrived08.dtb -dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-ast2500-evb.dtb \ aspeed-ast2600-evb.dtb \ aspeed-bmc-amd-ethanolx.dtb \ + aspeed-bmc-ampere-mtjade.dtb \ aspeed-bmc-arm-centriq2400-rep.dtb \ aspeed-bmc-arm-stardragon4800-rep2.dtb \ aspeed-bmc-bytedance-g220a.dtb \ @@ -1415,6 +1416,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-facebook-wedge400.dtb \ aspeed-bmc-facebook-yamp.dtb \ aspeed-bmc-facebook-yosemitev2.dtb \ + aspeed-bmc-ibm-everest.dtb \ aspeed-bmc-ibm-rainier.dtb \ aspeed-bmc-ibm-rainier-4u.dtb \ aspeed-bmc-intel-s2600wf.dtb \ @@ -1434,4 +1436,5 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-opp-witherspoon.dtb \ aspeed-bmc-opp-zaius.dtb \ aspeed-bmc-portwell-neptune.dtb \ - aspeed-bmc-quanta-q71l.dtb + aspeed-bmc-quanta-q71l.dtb \ + aspeed-bmc-supermicro-x11spi.dtb diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 7c6f2c11f0e1..902e295b309e 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -684,28 +684,31 @@ }; }; -&mac { +&mac_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; status = "okay"; - slaves = <1>; }; -&davinci_mdio { +&davinci_mdio_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; - status = "okay"; ethphy0: ethernet-phy@0 { reg = <0>; }; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <ðphy0>; phy-mode = "rgmii-id"; + ti,dual-emac-pvid = <1>; +}; + +&cpsw_port2 { + status = "disabled"; }; &tscadc { diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index b43b94122d3c..d5f8d5e2eb5d 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -596,19 +596,17 @@ }; }; -&mac { +&mac_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; - dual_emac = <1>; status = "okay"; }; -&davinci_mdio { +&davinci_mdio_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; - status = "okay"; ethphy0: ethernet-phy@0 { reg = <0>; @@ -619,16 +617,16 @@ }; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <ðphy0>; phy-mode = "rgmii-id"; - dual_emac_res_vlan = <1>; + ti,dual-emac-pvid = <1>; }; -&cpsw_emac1 { +&cpsw_port2 { phy-handle = <ðphy1>; phy-mode = "rgmii-id"; - dual_emac_res_vlan = <2>; + ti,dual-emac-pvid = <2>; }; &mmc1 { diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts index b958ab56a412..e923d065304d 100644 --- a/arch/arm/boot/dts/am335x-icev2.dts +++ b/arch/arm/boot/dts/am335x-icev2.dts @@ -474,31 +474,29 @@ }; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <ðphy0>; phy-mode = "rmii"; - dual_emac_res_vlan = <1>; + ti,dual-emac-pvid = <1>; }; -&cpsw_emac1 { +&cpsw_port2 { phy-handle = <ðphy1>; phy-mode = "rmii"; - dual_emac_res_vlan = <2>; + ti,dual-emac-pvid = <2>; }; -&mac { +&mac_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; status = "okay"; - dual_emac; }; -&davinci_mdio { +&davinci_mdio_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; - status = "okay"; reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; reset-delay-us = <2>; /* PHY datasheet states 1uS min */ diff --git a/arch/arm/boot/dts/am335x-myirtech-myc.dtsi b/arch/arm/boot/dts/am335x-myirtech-myc.dtsi new file mode 100644 index 000000000000..270a3d5e8f98 --- /dev/null +++ b/arch/arm/boot/dts/am335x-myirtech-myc.dtsi @@ -0,0 +1,267 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* SPDX-FileCopyrightText: Alexander Shiyan, <shc_work@mail.ru> */ + +/* Based on code by myc_c335x.dts, MYiRtech.com */ +/* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ */ + +/dts-v1/; + +#include "am33xx.dtsi" + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "MYIR MYC-AM335X"; + compatible = "myir,myc-am335x", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&vdd_core>; + voltage-tolerance = <2>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x10000000>; + }; + + vdd_mod: vdd_mod_reg { + compatible = "regulator-fixed"; + regulator-name = "vdd-mod"; + regulator-always-on; + regulator-boot-on; + }; + + vdd_core: vdd_core_reg { + compatible = "regulator-fixed"; + regulator-name = "vdd-core"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mod>; + }; + + leds: leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_mod_pins>; + + led_mod: led_mod { + label = "module:user"; + gpios = <&gpio3 18 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + panic-indicator; + }; + }; +}; + +&cpsw_emac0 { + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdio_pins_default>; + pinctrl-1 = <&mdio_pins_sleep>; + status = "okay"; + + phy0: ethernet-phy@4 { + reg = <4>; + }; +}; + +&elm { + status = "okay"; +}; + +&gpmc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&nand_pins_default>; + pinctrl-1 = <&nand_pins_sleep>; + ranges = <0 0 0x8000000 0x1000000>; + status = "okay"; + + nand0: nand@0,0 { + compatible = "ti,omap2-nand"; + reg = <0 0 4>; + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, <1 IRQ_TYPE_NONE>; + nand-bus-width = <8>; + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; + gpmc,device-width = <1>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <40>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + ti,elm-id = <&elm>; + ti,nand-ecc-opt = "bch8"; + + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default", "gpio", "sleep"; + pinctrl-0 = <&i2c0_pins_default>; + pinctrl-1 = <&i2c0_pins_gpio>; + pinctrl-2 = <&i2c0_pins_sleep>; + clock-frequency = <400000>; + scl-gpios = <&gpio3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + eeprom: eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + vcc-supply = <&vdd_mod>; + }; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <ð_slave1_pins_default>; + pinctrl-1 = <ð_slave1_pins_sleep>; + slaves = <1>; + status = "okay"; +}; + +&rtc { + system-power-controller; +}; + +&am33xx_pinmux { + mdio_pins_default: pinmux_mdio_pins_default { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) /* mdio_data */ + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) /* mdio_clk */ + >; + }; + + mdio_pins_sleep: pinmux_mdio_pins_sleep { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; + + eth_slave1_pins_default: pinmux_eth_slave1_pins_default { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii1_tctl */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii1_rctl */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii1_td3 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii1_td2 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii1_td1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii1_td0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii1_tclk */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii1_rclk */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii1_rd3 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii1_rd2 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii1_rd1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii1_rd0 */ + >; + }; + + eth_slave1_pins_sleep: pinmux_eth_slave1_pins_sleep { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; + + i2c0_pins_default: pinmux_i2c0_pins_default { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE0) /* I2C0_SDA */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE0) /* I2C0_SCL */ + >; + }; + + i2c0_pins_gpio: pinmux_i2c0_pins_gpio { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE7) /* gpio3[5] */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE7) /* gpio3[6] */ + >; + }; + + i2c0_pins_sleep: pinmux_i2c0_pins_sleep { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; + + led_mod_pins: pinmux_led_mod_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpio3[18] */ + >; + }; + + nand_pins_default: pinmux_nand_pins_default { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad6 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_ad7 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0) /* gpmc_wait0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpio0[31] */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0) /* gpmc_csn0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0) /* gpmc_advn_ale */ + AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0) /* gpmc_oen_ren */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0) /* gpmc_wen */ + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0) /* gpmc_be0n_cle */ + >; + }; + + nand_pins_sleep: pinmux_nand_pins_sleep { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; +}; diff --git a/arch/arm/boot/dts/am335x-myirtech-myd.dts b/arch/arm/boot/dts/am335x-myirtech-myd.dts new file mode 100644 index 000000000000..c996639874e6 --- /dev/null +++ b/arch/arm/boot/dts/am335x-myirtech-myd.dts @@ -0,0 +1,536 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* SPDX-FileCopyrightText: Alexander Shiyan, <shc_work@mail.ru> */ +/* Based on code by myd_c335x.dts, MYiRtech.com */ +/* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ */ + +/dts-v1/; + +#include "am335x-myirtech-myc.dtsi" + +#include <dt-bindings/display/tda998x.h> +#include <dt-bindings/input/input.h> + +/ { + model = "MYIR MYD-AM335X"; + compatible = "myir,myd-am335x", "myir,myc-am335x", "ti,am33xx"; + + chosen { + stdout-path = &uart0; + }; + + clk12m: clk12m { + compatible = "fixed-clock"; + clock-frequency = <12000000>; + + #clock-cells = <0>; + }; + + gpio_buttons: gpio_buttons { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_buttons_pins>; + #address-cells = <1>; + #size-cells = <0>; + + button1: button@0 { + reg = <0>; + label = "button1"; + linux,code = <BTN_1>; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + + button2: button@1 { + reg = <1>; + label = "button2"; + linux,code = <BTN_2>; + gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; + }; + }; + + sound: sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&master_codec>; + simple-audio-card,frame-master = <&master_codec>; + + simple-audio-card,cpu { + sound-dai = <&mcasp0>; + }; + + master_codec: simple-audio-card,codec@1 { + sound-dai = <&sgtl5000>; + }; + + simple-audio-card,codec@2 { + sound-dai = <&tda9988>; + }; + }; + + vdd_5v0: vdd_5v0_reg { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_3v3: vdd_3v3_reg { + compatible = "regulator-fixed"; + regulator-name = "vdd-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_5v0>; + }; +}; + +&cpsw_emac1 { + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; +}; + +&davinci_mdio { + phy1: ethernet-phy@6 { + reg = <6>; + eee-broken-1000t; + }; +}; + +&dcan0 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&dcan0_pins_default>; + pinctrl-1 = <&dcan0_pins_sleep>; + status = "okay"; +}; + +&dcan1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&dcan1_pins_default>; + pinctrl-1 = <&dcan1_pins_sleep>; + status = "okay"; +}; + +&ehrpwm0 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&ehrpwm0_pins_default>; + pinctrl-1 = <&ehrpwm0_pins_sleep>; + status = "okay"; +}; + +&epwmss0 { + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default", "gpio", "sleep"; + pinctrl-0 = <&i2c1_pins_default>; + pinctrl-1 = <&i2c1_pins_gpio>; + pinctrl-2 = <&i2c1_pins_sleep>; + clock-frequency = <400000>; + scl-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio0 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + sgtl5000: sgtl5000@a { + compatible = "fsl,sgtl5000"; + reg =<0xa>; + clocks = <&clk12m>; + micbias-resistor-k-ohms = <4>; + micbias-voltage-m-volts = <2250>; + VDDA-supply = <&vdd_3v3>; + VDDIO-supply = <&vdd_3v3>; + + #sound-dai-cells = <0>; + }; + + tda9988: tda9988@70 { + compatible = "nxp,tda998x"; + reg =<0x70>; + audio-ports = <TDA998x_I2S 1>; + + #sound-dai-cells = <0>; + + ports { + port@0 { + hdmi_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; + }; + }; + }; +}; + +&lcdc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&lcdc_pins_default>; + pinctrl-1 = <&lcdc_pins_sleep>; + blue-and-red-wiring = "straight"; + status = "okay"; + + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&hdmi_0>; + }; + }; +}; + +&leds { + pinctrl-0 = <&led_mod_pins &leds_pins>; + + led1: led1 { + label = "base:user1"; + gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + }; + + led2: led2 { + label = "base:user2"; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_GREEN>; + default-state = "off"; + }; +}; + +&mac { + pinctrl-0 = <ð_slave1_pins_default>, <ð_slave2_pins_default>; + pinctrl-1 = <ð_slave1_pins_sleep>, <ð_slave2_pins_sleep>; + slaves = <2>; +}; + +&mcasp0 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mcasp0_pins_default>; + pinctrl-1 = <&mcasp0_pins_sleep>; + op-mode = <0>; + tdm-slots = <2>; + serial-dir = <0 1 2 0>; + tx-num-evt = <32>; + rx-num-evt = <32>; + status = "okay"; + + #sound-dai-cells = <0>; +}; + +&mmc1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_sleep>; + cd-gpios = <&gpio3 21 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <&vdd_3v3>; + status = "okay"; +}; + +&nand0 { + partition@0 { + label = "MLO"; + reg = <0x00000 0x20000>; + }; + + partition@20000 { + label = "boot"; + reg = <0x20000 0x80000>; + }; +}; + +&tscadc { + status = "okay"; + + adc: adc { + ti,adc-channels = <0 1 2 3 4 5 6>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart1_pins_default>; + pinctrl-1 = <&uart1_pins_sleep>; + linux,rs485-enabled-at-boot-time; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart2_pins_default>; + pinctrl-1 = <&uart2_pins_sleep>; + status = "okay"; +}; + +&usb { + pinctrl-names = "default"; + pinctrl-0 = <&usb_pins>; +}; + +&usb0 { + dr_mode = "otg"; +}; + +&usb0_phy { + vcc-supply = <&vdd_5v0>; +}; + +&usb1 { + dr_mode = "host"; +}; + +&usb1_phy { + vcc-supply = <&vdd_5v0>; +}; + +&vdd_mod { + vin-supply = <&vdd_3v3>; +}; + +&am33xx_pinmux { + dcan0_pins_default: pinmux_dcan0_pins_default { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE2) /* dcan0_tx_mux2 */ + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT, MUX_MODE2) /* dcan0_rx_mux2 */ + >; + }; + + dcan0_pins_sleep: pinmux_dcan0_pins_sleep { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; + + dcan1_pins_default: pinmux_dcan1_pins_default { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* dcan1_tx_mux0 */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2) /* dcan1_rx_mux0 */ + >; + }; + + dcan1_pins_sleep: pinmux_dcan1_pins_sleep { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; + + ehrpwm0_pins_default: pinmux_ehrpwm0_pins_default { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_OUTPUT, MUX_MODE3) /* ehrpwm0A_mux1 */ + >; + }; + + ehrpwm0_pins_sleep: pinmux_ehrpwm0_pins_sleep { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; + + eth_slave2_pins_default: pinmux_eth_slave2_pins_default { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii2_tctl */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii2_rctl */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii2_td3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii2_td2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii2_td1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii2_td0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii2_tclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii2_rclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii2_rd3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii2_rd2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2 /* rgmii2_rd1 */) + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2 /* rgmii2_rd0 */) + >; + }; + + eth_slave2_pins_sleep: pinmux_eth_slave2_pins_sleep { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; + + gpio_buttons_pins: pinmux_gpio_buttons_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpio3[0] */ + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT, MUX_MODE7) /* gpio0[29] */ + >; + }; + + i2c1_pins_default: pinmux_i2c1_pins_default { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE2) /* I2C1_SDA_mux3 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE2) /* I2C1_SCL_mux3 */ + >; + }; + + i2c1_pins_gpio: pinmux_i2c1_pins_gpio { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT, MUX_MODE7) /* gpio0[4] */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT, MUX_MODE7) /* gpio0[5] */ + >; + }; + + i2c1_pins_sleep: pinmux_i2c1_pins_sleep { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; + + lcdc_pins_default: pinmux_lcdc_pins_default { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) /* lcd_data0 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) /* lcd_data1 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0) /* lcd_data2 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0) /* lcd_data3 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0) /* lcd_data4 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0) /* lcd_data5 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0) /* lcd_data6 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0) /* lcd_data7 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0) /* lcd_data8 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0) /* lcd_data9 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0) /* lcd_data10 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0) /* lcd_data11 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0) /* lcd_data12 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0) /* lcd_data13 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0) /* lcd_data14 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0) /* lcd_data15 */ + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0) /* lcd_vsync */ + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0) /* lcd_hsync */ + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0) /* lcd_pclk */ + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0) /* lcd_ac_bias_en */ + >; + }; + + lcdc_pins_sleep: pinmux_lcdc_pins_sleep { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PULL_DISABLE, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; + + leds_pins: pinmux_leds_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE7) /* gpio0[27] */ + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE7) /* gpio0[3] */ + >; + }; + + mcasp0_pins_default: pinmux_mcasp0_pins_default { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0) /* mcasp0_aclkx_mux0 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0) /* mcasp0_fsx_mux0 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mcasp0_axr2_mux0 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_INPUT_PULLDOWN, MUX_MODE0) /* mcasp0_axr1_mux0 */ + >; + }; + + mcasp0_pins_sleep: pinmux_mcasp0_pins_sleep { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; + + mmc1_pins_default: pinmux_mmc1_pins_default { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_dat3 */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_dat2 */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_dat1 */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_dat0 */ + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_clk */ + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_cmd */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE7) /* gpio3[21] */ + >; + }; + + mmc1_pins_sleep: pinmux_mmc1_pins_sleep { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) /* uart0_rxd */ + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) /* uart0_txd */ + >; + }; + + uart1_pins_default: pinmux_uart1_pins_default { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) /* uart1_rxd */ + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) /* uart1_txd */ + >; + }; + + uart1_pins_sleep: pinmux_uart1_pins_sleep { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; + + uart2_pins_default: pinmux_uart2_pins_default { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT, MUX_MODE6) /* uart2_rxd_mux1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_OUTPUT, MUX_MODE6) /* uart2_txd_mux1 */ + >; + }; + + uart2_pins_sleep: pinmux_uart2_pins_sleep { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; + + usb_pins: pinmux_usb_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_USB0_DRVVBUS, PIN_OUTPUT_PULLDOWN, MUX_MODE0) /* USB0_DRVVBUS */ + AM33XX_PADCONF(AM335X_PIN_USB1_DRVVBUS, PIN_OUTPUT_PULLDOWN, MUX_MODE0) /* USB1_DRVVBUS */ + >; + }; +}; diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 78088506d25b..1fb22088caeb 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -765,6 +765,55 @@ phys = <&phy_gmii_sel 2 1>; }; }; + + mac_sw: switch@0 { + compatible = "ti,am335x-cpsw-switch", "ti,cpsw-switch"; + reg = <0x0 0x4000>; + ranges = <0 0 0x4000>; + clocks = <&cpsw_125mhz_gclk>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + syscon = <&scm_conf>; + status = "disabled"; + + interrupts = <40 41 42 43>; + interrupt-names = "rx_thresh", "rx", "tx", "misc"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + cpsw_port1: port@1 { + reg = <1>; + label = "port1"; + mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 1 1>; + }; + + cpsw_port2: port@2 { + reg = <2>; + label = "port2"; + mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 2 1>; + }; + }; + + davinci_mdio_sw: mdio@1000 { + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + clocks = <&cpsw_125mhz_gclk>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <0>; + bus_freq = <1000000>; + reg = <0x1000 0x100>; + }; + + cpts { + clocks = <&cpsw_cpts_rft_clk>; + clock-names = "cpts"; + }; + }; }; target-module@180000 { /* 0x4a180000, ap 5 10.0 */ diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts index 37758761cd88..1b8f3a28af05 100644 --- a/arch/arm/boot/dts/am574x-idk.dts +++ b/arch/arm/boot/dts/am574x-idk.dts @@ -39,3 +39,7 @@ &m_can0 { status = "disabled"; }; + +&emif1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 827e82be2201..fb9c8a0b241c 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -148,6 +148,8 @@ reg = <0>; label = "pxa3xx_nand-0"; nand-rb = <0>; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; marvell,nand-keep-config; nand-on-flash-bbt; }; diff --git a/arch/arm/boot/dts/armada-388-helios4.dts b/arch/arm/boot/dts/armada-388-helios4.dts index b3728de3bd3f..ec134e22bae3 100644 --- a/arch/arm/boot/dts/armada-388-helios4.dts +++ b/arch/arm/boot/dts/armada-388-helios4.dts @@ -70,6 +70,9 @@ system-leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&helios_system_led_pins>; + status-led { label = "helios4:green:status"; gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; @@ -86,6 +89,9 @@ io-leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&helios_io_led_pins>; + sata1-led { label = "helios4:green:ata1"; gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; @@ -121,11 +127,15 @@ fan1: j10-pwm { compatible = "pwm-fan"; pwms = <&gpio1 9 40000>; /* Target freq:25 kHz */ + pinctrl-names = "default"; + pinctrl-0 = <&helios_fan1_pins>; }; fan2: j17-pwm { compatible = "pwm-fan"; pwms = <&gpio1 23 40000>; /* Target freq:25 kHz */ + pinctrl-names = "default"; + pinctrl-0 = <&helios_fan2_pins>; }; usb2_phy: usb2-phy { @@ -286,16 +296,22 @@ "mpp39", "mpp40"; marvell,function = "sd0"; }; - helios_led_pins: helios-led-pins { - marvell,pins = "mpp24", "mpp25", - "mpp49", "mpp50", + helios_system_led_pins: helios-system-led-pins { + marvell,pins = "mpp24", "mpp25"; + marvell,function = "gpio"; + }; + helios_io_led_pins: helios-io-led-pins { + marvell,pins = "mpp49", "mpp50", "mpp52", "mpp53", "mpp54"; marvell,function = "gpio"; }; - helios_fan_pins: helios-fan-pins { - marvell,pins = "mpp41", "mpp43", - "mpp48", "mpp55"; + helios_fan1_pins: helios_fan1_pins { + marvell,pins = "mpp41", "mpp43"; + marvell,function = "gpio"; + }; + helios_fan2_pins: helios_fan2_pins { + marvell,pins = "mpp48", "mpp55"; marvell,function = "gpio"; }; microsom_spi1_cs_pins: spi1-cs-pins { diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts index 89be13197780..2772796e215e 100644 --- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts @@ -237,3 +237,11 @@ &fsim0 { status = "okay"; }; + +&ehci1 { + status = "okay"; +}; + +&uhci { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts index 96ff0aea64e5..ac2d04cfaf2f 100644 --- a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts +++ b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts @@ -218,7 +218,7 @@ &lpc_snoop { status = "okay"; - snoop-ports = <0x80>; + snoop-ports = <0x80>, <0x81>; }; &lpc_ctrl { diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts new file mode 100644 index 000000000000..8f5ec22e51c2 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts @@ -0,0 +1,558 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Ampere Mt. Jade BMC"; + compatible = "ampere,mtjade-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@9f000000 { + no-map; + reg = <0x9f000000 0x01000000>; /* 16M */ + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + video_engine_memory: jpegbuffer { + size = <0x02000000>; /* 32M */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + leds { + compatible = "gpio-leds"; + + fault { + gpios = <&gpio ASPEED_GPIO(B, 6) GPIO_ACTIVE_HIGH>; + }; + + identify { + gpios = <&gpio ASPEED_GPIO(Q, 6) GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + shutdown_ack { + label = "SHUTDOWN_ACK"; + gpios = <&gpio ASPEED_GPIO(G, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(G, 2)>; + }; + + reboot_ack { + label = "REBOOT_ACK"; + gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(J, 3)>; + }; + + S0_overtemp { + label = "S0_OVERTEMP"; + gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(G, 3)>; + }; + + S0_hightemp { + label = "S0_HIGHTEMP"; + gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(J, 0)>; + }; + + S0_cpu_fault { + label = "S0_CPU_FAULT"; + gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>; + linux,code = <ASPEED_GPIO(J, 1)>; + }; + + S1_overtemp { + label = "S1_OVERTEMP"; + gpios = <&gpio ASPEED_GPIO(Z, 6) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(Z, 6)>; + }; + + S1_hightemp { + label = "S1_HIGHTEMP"; + gpios = <&gpio ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(AB, 0)>; + }; + + S1_cpu_fault { + label = "S1_CPU_FAULT"; + gpios = <&gpio ASPEED_GPIO(Z, 1) GPIO_ACTIVE_HIGH>; + linux,code = <ASPEED_GPIO(Z, 1)>; + }; + + id_button { + label = "ID_BUTTON"; + gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(Q, 5)>; + }; + + }; + + gpioA0mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + mux-gpios = <&gpio ASPEED_GPIO(A, 0) GPIO_ACTIVE_LOW>; + }; + + adc0mux: adc0mux { + compatible = "io-channel-mux"; + io-channels = <&adc 0>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc1mux: adc1mux { + compatible = "io-channel-mux"; + io-channels = <&adc 1>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc2mux: adc2mux { + compatible = "io-channel-mux"; + io-channels = <&adc 2>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc3mux: adc3mux { + compatible = "io-channel-mux"; + io-channels = <&adc 3>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc4mux: adc4mux { + compatible = "io-channel-mux"; + io-channels = <&adc 4>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc5mux: adc5mux { + compatible = "io-channel-mux"; + io-channels = <&adc 5>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc6mux: adc6mux { + compatible = "io-channel-mux"; + io-channels = <&adc 6>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc7mux: adc7mux { + compatible = "io-channel-mux"; + io-channels = <&adc 7>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc8mux: adc8mux { + compatible = "io-channel-mux"; + io-channels = <&adc 8>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc9mux: adc9mux { + compatible = "io-channel-mux"; + io-channels = <&adc 9>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc10mux: adc10mux { + compatible = "io-channel-mux"; + io-channels = <&adc 10>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc11mux: adc11mux { + compatible = "io-channel-mux"; + io-channels = <&adc 11>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc12mux: adc12mux { + compatible = "io-channel-mux"; + io-channels = <&adc 12>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + adc13mux: adc13mux { + compatible = "io-channel-mux"; + io-channels = <&adc 13>; + #io-channel-cells = <1>; + io-channel-names = "parent"; + mux-controls = <&gpioA0mux>; + channels = "s0", "s1"; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0mux 0>, <&adc0mux 1>, + <&adc1mux 0>, <&adc1mux 1>, + <&adc2mux 0>, <&adc2mux 1>, + <&adc3mux 0>, <&adc3mux 1>, + <&adc4mux 0>, <&adc4mux 1>, + <&adc5mux 0>, <&adc5mux 1>, + <&adc6mux 0>, <&adc6mux 1>, + <&adc7mux 0>, <&adc7mux 1>, + <&adc8mux 0>, <&adc8mux 1>, + <&adc9mux 0>, <&adc9mux 1>, + <&adc10mux 0>, <&adc10mux 1>, + <&adc11mux 0>, <&adc11mux 1>, + <&adc12mux 0>, <&adc12mux 1>, + <&adc13mux 0>, <&adc13mux 1>; + }; + + iio-hwmon-adc14 { + compatible = "iio-hwmon"; + io-channels = <&adc 14>; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 15>; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + /* spi-max-frequency = <50000000>; */ +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + /* spi-max-frequency = <100000000>; */ + }; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_ncts1_default + &pinctrl_nrts1_default>; +}; + +&uart2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default + &pinctrl_rxd2_default>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default + &pinctrl_rxd3_default>; +}; + +&uart4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd4_default + &pinctrl_rxd4_default>; +}; + +/* The BMC's uart */ +&uart5 { + status = "okay"; +}; + +&mac1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + eeprom@50 { + compatible = "microchip,24c64", "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + + inlet_mem2: tmp175@28 { + compatible = "ti,tmp175"; + reg = <0x28>; + }; + + inlet_cpu: tmp175@29 { + compatible = "ti,tmp175"; + reg = <0x29>; + }; + + inlet_mem1: tmp175@2a { + compatible = "ti,tmp175"; + reg = <0x2a>; + }; + + outlet_cpu: tmp175@2b { + compatible = "ti,tmp175"; + reg = <0x2b>; + }; + + outlet1: tmp175@2c { + compatible = "ti,tmp175"; + reg = <0x2c>; + }; + + outlet2: tmp175@2d { + compatible = "ti,tmp175"; + reg = <0x2d>; + }; +}; + +&i2c4 { + status = "okay"; + rtc@51 { + compatible = "nxp,pcf85063a"; + reg = <0x51>; + }; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; + psu@58 { + compatible = "pmbus"; + reg = <0x58>; + }; + + psu@59 { + compatible = "pmbus"; + reg = <0x59>; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2_default &pinctrl_pwm3_default + &pinctrl_pwm4_default &pinctrl_pwm5_default + &pinctrl_pwm6_default &pinctrl_pwm7_default>; + + fan@0 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x04>; + }; + + fan@1 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x05>; + }; + + fan@2 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x06>; + }; + + fan@3 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x07>; + }; + + fan@4 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x08>; + }; + + fan@5 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x09>; + }; + + fan@6 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x0a>; + }; + + fan@7 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x0b>; + }; + + fan@8 { + reg = <0x06>; + aspeed,fan-tach-ch = /bits/ 8 <0x0c>; + }; + + fan@9 { + reg = <0x06>; + aspeed,fan-tach-ch = /bits/ 8 <0x0d>; + }; + + fan@10 { + reg = <0x07>; + aspeed,fan-tach-ch = /bits/ 8 <0x0e>; + }; + + fan@11 { + reg = <0x07>; + aspeed,fan-tach-ch = /bits/ 8 <0x0f>; + }; + +}; + +&vhub { + status = "okay"; +}; + +&adc { + status = "okay"; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +&gpio { + gpio-line-names = + /*A0-A7*/ "","","","S0_BMC_SPECIAL_BOOT","","","","", + /*B0-B7*/ "BMC_SELECT_EEPROM","","","", + "POWER_BUTTON","","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","","BMC_SYS_PSON_L","S0_DDR_SAVE","PGOOD", + "S1_DDR_SAVE","","", + /*G0-G7*/ "S0_FW_BOOT_OK","SHD_REQ_L","","S0_OVERTEMP_L","","", + "","", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","S1_BMC_SPECIAL_BOOT","","","","","", + /*J0-J7*/ "S0_HIGHTEMP_L","S0_FAULT_L","S0_SCP_AUTH_FAIL_L","", + "","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","BMC_SYSRESET_L","SPI_AUTH_FAIL_L","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "","","","","","","","", + /*Q0-Q7*/ "","","","","","UID_BUTTON","","", + /*R0-R7*/ "","","BMC_EXT_HIGHTEMP_L","","","RESET_BUTTON","","", + /*S0-S7*/ "","","","","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "S0_BMC_PLIMIT","S1_FAULT_L","S1_FW_BOOT_OK","","", + "S1_SCP_AUTH_FAIL_L","S1_OVERTEMP_L","", + /*AA0-AA7*/ "","","","","","","","", + /*AB0-AB7*/ "S1_HIGHTEMP_L","S1_BMC_PLIMIT","S0_BMC_DDR_ADDR", + "S1_BMC_DDR_ADR","","","","", + /*AC0-AC7*/ "SYS_PWR_GD","","","","","BMC_READY","SLAVE_PRESENT_L", + "BMC_OCP_PG"; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts index 2feb25b0e43b..5ef88c377358 100644 --- a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts +++ b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts @@ -446,7 +446,11 @@ &i2c4 { status = "okay"; - + ipmb0@10 { + compatible = "ipmb-dev"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + i2c-protocol; + }; }; &i2c5 { @@ -901,14 +905,14 @@ &gpio { pin_gpio_i3 { gpio-hog; - gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_LOW>; + gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>; output-low; line-name = "NCSI_BMC_R_SEL"; }; pin_gpio_b6 { gpio-hog; - gpios = <ASPEED_GPIO(B, 6) GPIO_ACTIVE_LOW>; + gpios = <ASPEED_GPIO(B, 6) GPIO_ACTIVE_HIGH>; output-low; line-name = "EN_NCSI_SWITCH_N"; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts new file mode 100644 index 000000000000..6bd876657bb8 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts @@ -0,0 +1,775 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2020 IBM Corp. +/dts-v1/; + +#include "aspeed-g6.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/i2c/i2c.h> +#include <dt-bindings/leds/leds-pca955x.h> + +/ { + model = "Everest"; + compatible = "ibm,everest-bmc", "aspeed,ast2600"; + + aliases { + i2c100 = &cfam0_i2c0; + i2c101 = &cfam0_i2c1; + i2c110 = &cfam0_i2c10; + i2c111 = &cfam0_i2c11; + i2c112 = &cfam0_i2c12; + i2c113 = &cfam0_i2c13; + i2c114 = &cfam0_i2c14; + i2c115 = &cfam0_i2c15; + i2c202 = &cfam1_i2c2; + i2c203 = &cfam1_i2c3; + i2c210 = &cfam1_i2c10; + i2c211 = &cfam1_i2c11; + i2c214 = &cfam1_i2c14; + i2c215 = &cfam1_i2c15; + i2c216 = &cfam1_i2c16; + i2c217 = &cfam1_i2c17; + i2c300 = &cfam2_i2c0; + i2c301 = &cfam2_i2c1; + i2c310 = &cfam2_i2c10; + i2c311 = &cfam2_i2c11; + i2c312 = &cfam2_i2c12; + i2c313 = &cfam2_i2c13; + i2c314 = &cfam2_i2c14; + i2c315 = &cfam2_i2c15; + i2c402 = &cfam3_i2c2; + i2c403 = &cfam3_i2c3; + i2c410 = &cfam3_i2c10; + i2c411 = &cfam3_i2c11; + i2c414 = &cfam3_i2c14; + i2c415 = &cfam3_i2c15; + i2c416 = &cfam3_i2c16; + i2c417 = &cfam3_i2c17; + + serial4 = &uart5; + + spi10 = &cfam0_spi0; + spi11 = &cfam0_spi1; + spi12 = &cfam0_spi2; + spi13 = &cfam0_spi3; + spi20 = &cfam1_spi0; + spi21 = &cfam1_spi1; + spi22 = &cfam1_spi2; + spi23 = &cfam1_spi3; + spi30 = &cfam2_spi0; + spi31 = &cfam2_spi1; + spi32 = &cfam2_spi2; + spi33 = &cfam2_spi3; + spi40 = &cfam3_spi0; + spi41 = &cfam3_spi1; + spi42 = &cfam3_spi2; + spi43 = &cfam3_spi3; + }; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* LPC FW cycle bridge region requires natural alignment */ + flash_memory: region@b8000000 { + no-map; + reg = <0xb8000000 0x04000000>; /* 64M */ + }; + + /* 48MB region from the end of flash to start of vga memory */ + ramoops@bc000000 { + compatible = "ramoops"; + reg = <0xbc000000 0x180000>; /* 16 * (3 * 0x8000) */ + record-size = <0x8000>; + console-size = <0x8000>; + pmsg-size = <0x8000>; + max-reason = <3>; /* KMSG_DUMP_EMERG */ + }; + + /* VGA region is dictated by hardware strapping */ + vga_memory: region@bf000000 { + no-map; + compatible = "shared-dma-pool"; + reg = <0xbf000000 0x01000000>; /* 16M */ + }; + }; +}; + +&ehci1 { + status = "okay"; +}; + +&emmc_controller { + status = "okay"; +}; + +&pinctrl_emmc_default { + bias-disable; +}; + +&emmc { + status = "okay"; +}; + +&fsim0 { + status = "okay"; + + #address-cells = <2>; + #size-cells = <0>; + + /* + * CFAM Reset is supposed to be active low but pass1 hardware is wired + * active high. + */ + cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam0_i2c0: i2c-bus@0 { + reg = <0>; /* OMI01 */ + }; + + cfam0_i2c1: i2c-bus@1 { + reg = <1>; /* OMI23 */ + }; + + cfam0_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + }; + + cfam0_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + }; + + cfam0_i2c12: i2c-bus@c { + reg = <12>; /* OP4A */ + }; + + cfam0_i2c13: i2c-bus@d { + reg = <13>; /* OP4B */ + }; + + cfam0_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + }; + + cfam0_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam0_spi0: spi@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam0_spi1: spi@20 { + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam0_spi2: spi@40 { + reg = <0x40>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam0_spi3: spi@60 { + reg = <0x60>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ0: occ { + compatible = "ibm,p10-occ"; + }; + }; + + fsi_hub0: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + }; + }; +}; + +&fsi_hub0 { + cfam@1,0 { + reg = <1 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <1>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam1_i2c2: i2c-bus@2 { + reg = <2>; /* OMI45 */ + }; + + cfam1_i2c3: i2c-bus@3 { + reg = <3>; /* OMI67 */ + }; + + cfam1_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + }; + + cfam1_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + }; + + cfam1_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + }; + + cfam1_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + }; + + cfam1_i2c16: i2c-bus@10 { + reg = <16>; /* OP6A */ + }; + + cfam1_i2c17: i2c-bus@11 { + reg = <17>; /* OP6B */ + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam1_spi0: spi@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam1_spi1: spi@20 { + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam1_spi2: spi@40 { + reg = <0x40>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam1_spi3: spi@60 { + reg = <0x60>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ1: occ { + compatible = "ibm,p10-occ"; + }; + }; + + fsi_hub1: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; + + cfam@2,0 { + reg = <2 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <2>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam2_i2c0: i2c-bus@0 { + reg = <0>; /* OM01 */ + }; + + cfam2_i2c1: i2c-bus@1 { + reg = <1>; /* OM23 */ + }; + + cfam2_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + }; + + cfam2_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + }; + + cfam2_i2c12: i2c-bus@c { + reg = <12>; /* OP4A */ + }; + + cfam2_i2c13: i2c-bus@d { + reg = <13>; /* OP4B */ + }; + + cfam2_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + }; + + cfam2_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam2_spi0: spi@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam2_spi1: spi@20 { + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam2_spi2: spi@40 { + reg = <0x40>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam2_spi3: spi@60 { + reg = <0x60>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ2: occ { + compatible = "ibm,p10-occ"; + }; + }; + + fsi_hub2: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; + + cfam@3,0 { + reg = <3 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <3>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam3_i2c2: i2c-bus@2 { + reg = <2>; /* OM45 */ + }; + + cfam3_i2c3: i2c-bus@3 { + reg = <3>; /* OM67 */ + }; + + cfam3_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + }; + + cfam3_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + }; + + cfam3_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + }; + + cfam3_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + }; + + cfam3_i2c16: i2c-bus@10 { + reg = <16>; /* OP6A */ + }; + + cfam3_i2c17: i2c-bus@11 { + reg = <17>; /* OP6B */ + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam3_spi0: spi@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam3_spi1: spi@20 { + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam3_spi2: spi@40 { + reg = <0x40>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam3_spi3: spi@60 { + reg = <0x60>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ3: occ { + compatible = "ibm,p10-occ"; + }; + }; + + fsi_hub3: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; +}; + +/* Legacy OCC numbering (to get rid of when userspace is fixed) */ +&fsi_occ0 { + reg = <1>; +}; + +&fsi_occ1 { + reg = <2>; +}; + +&fsi_occ2 { + reg = <3>; +}; + +&fsi_occ3 { + reg = <4>; +}; + +&ibt { + status = "okay"; +}; + +&vuart1 { + status = "okay"; +}; + +&vuart2 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; +}; + +&kcs4 { + compatible = "openbmc,mctp-lpc"; + status = "okay"; +}; + +&mac2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii3_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>, + <&syscon ASPEED_CLK_MAC3RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>, + <&syscon ASPEED_CLK_MAC4RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&xdma { + status = "okay"; + memory-region = <&vga_memory>; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts index a4b77aec5424..6c9804d2f3b4 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts @@ -195,6 +195,7 @@ &emmc { status = "okay"; + clk-phase-mmc-hs200 = <180>, <180>; }; &fsim0 { @@ -579,7 +580,7 @@ gpio-controller; #gpio-cells = <2>; - smbus0 { + smbus0-hog { gpio-hog; gpios = <4 GPIO_ACTIVE_HIGH>; output-high; diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts index 62a3ab4c1866..07593897fc9a 100644 --- a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts +++ b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts @@ -204,6 +204,39 @@ }; +&gpio { + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "","","front-psu","checkstop","cfam-reset","","","init-ok", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "ps0-presence","ps1-presence","","","front-memory","","","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","","front-fan","","","", + /*I0-I7*/ "front-syshealth","front-syshot","mux-gpios","enable-gpios","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "","","","","","","","", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","power","trans-gpios","","","","","", + /*S0-S7*/ "","","","","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","","identify", + /*AA0-AA7*/ "clock-gpios","","data-gpios","","","","","", + /*AB0-AB7*/ "","","","","","","","", + /*AC0-AC7*/ "","","","","","","",""; +}; + &fmc { status = "okay"; @@ -756,12 +789,12 @@ status = "okay"; power-supply@58 { - compatible = "pmbus"; + compatible = "inspur,ipsps1"; reg = <0x58>; }; power-supply@59 { - compatible = "pmbus"; + compatible = "inspur,ipsps1"; reg = <0x59>; }; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts index cb85168f6761..577c211c469e 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts @@ -827,7 +827,7 @@ gpio-controller; #gpio-cells = <2>; - smbus0 { + smbus0-hog { gpio-hog; gpios = <4 GPIO_ACTIVE_HIGH>; output-high; @@ -852,7 +852,7 @@ gpio-controller; #gpio-cells = <2>; - smbus1 { + smbus1-hog { gpio-hog; gpios = <4 GPIO_ACTIVE_HIGH>; output-high; @@ -900,7 +900,7 @@ gpio-controller; #gpio-cells = <2>; - smbus2 { + smbus2-hog { gpio-hog; gpios = <4 GPIO_ACTIVE_HIGH>; output-high; @@ -925,7 +925,7 @@ gpio-controller; #gpio-cells = <2>; - smbus3 { + smbus3-hog { gpio-hog; gpios = <4 GPIO_ACTIVE_HIGH>; output-high; @@ -992,7 +992,7 @@ gpio-controller; #gpio-cells = <2>; - smbus4 { + smbus4-hog { gpio-hog; gpios = <4 GPIO_ACTIVE_HIGH>; output-high; @@ -1017,7 +1017,7 @@ gpio-controller; #gpio-cells = <2>; - smbus5 { + smbus5-hog { gpio-hog; gpios = <4 GPIO_ACTIVE_HIGH>; output-high; @@ -1065,7 +1065,7 @@ gpio-controller; #gpio-cells = <2>; - smbus6 { + smbus6-hog { gpio-hog; gpios = <4 GPIO_ACTIVE_HIGH>; output-high; @@ -1090,7 +1090,7 @@ gpio-controller; #gpio-cells = <2>; - smbus7 { + smbus7-hog { gpio-hog; gpios = <4 GPIO_ACTIVE_HIGH>; output-high; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts index b648e468e9db..8503152faaf0 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts @@ -582,6 +582,11 @@ /* TMP275A */ /* TMP275A */ + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + tmp275@48 { compatible = "ti,tmp275"; reg = <0x48>; diff --git a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts index 4a1ca8f5b6a7..03c161493ffc 100644 --- a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts +++ b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts @@ -121,6 +121,8 @@ pca9555@27 { compatible = "nxp,pca9555"; reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; }; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-supermicro-x11spi.dts b/arch/arm/boot/dts/aspeed-bmc-supermicro-x11spi.dts new file mode 100644 index 000000000000..bc16ad2b5c80 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-supermicro-x11spi.dts @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2020 Super Micro Computer, Inc + +/dts-v1/; + +#include "aspeed-g5.dtsi" + +/ { + model = "X11SPI BMC"; + compatible = "supermicro,x11spi-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@7f000000 { + no-map; + reg = <0x7f000000 0x01000000>; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, + <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>, + <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>; + }; + +}; + +&gpio { + status = "okay"; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + }; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&mac1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&gfx { + status = "okay"; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default + &pinctrl_pwm2_default &pinctrl_pwm3_default + &pinctrl_pwm4_default &pinctrl_pwm5_default + &pinctrl_pwm6_default &pinctrl_pwm7_default>; +}; diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index b3dafbc8caca..e7a45ba18fc9 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -375,6 +375,7 @@ compatible = "aspeed,ast2400-lpc-snoop"; reg = <0x10 0x8>; interrupts = <8>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index 5bc0de0f3365..21930521a986 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -497,6 +497,7 @@ compatible = "aspeed,ast2500-lpc-snoop"; reg = <0x10 0x8>; interrupts = <8>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index 810b0676ab03..3ee470c2b7b5 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -524,6 +524,7 @@ compatible = "aspeed,ast2600-lpc-snoop"; reg = <0x0 0x80>; interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/at91-kizbox3_common.dtsi index 9ce513dd514b..c4b3750495da 100644 --- a/arch/arm/boot/dts/at91-kizbox3_common.dtsi +++ b/arch/arm/boot/dts/at91-kizbox3_common.dtsi @@ -341,7 +341,6 @@ input@0 { reg = <0>; - atmel,wakeup-type = "low"; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts index 0e159f879c15..84e1180f3e89 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts @@ -142,7 +142,6 @@ input@0 { reg = <0>; - atmel,wakeup-type = "low"; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi index a06700e53e4c..025a78310e3a 100644 --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi @@ -43,14 +43,20 @@ &i2c0 { pinctrl-0 = <&pinctrl_i2c0_default>; - pinctrl-names = "default"; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + pinctrl-names = "default", "gpio"; + sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; }; &i2c1 { dmas = <0>, <0>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + sda-gpios = <&pioA PIN_PD19 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; mcp16502@5b { @@ -258,12 +264,24 @@ bias-disable; }; + pinctrl_i2c0_gpio: i2c0_gpio { + pinmux = <PIN_PD21__GPIO>, + <PIN_PD22__GPIO>; + bias-disable; + }; + pinctrl_i2c1_default: i2c1_default { pinmux = <PIN_PD19__TWD1>, <PIN_PD20__TWCK1>; bias-disable; }; + pinctrl_i2c1_gpio: i2c1_gpio { + pinmux = <PIN_PD19__GPIO>, + <PIN_PD20__GPIO>; + bias-disable; + }; + pinctrl_macb0_default: macb0_default { pinmux = <PIN_PB14__GTXCK>, <PIN_PB15__GTXEN>, diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts index 6b38fa3f5568..180a08765cb8 100644 --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts @@ -209,7 +209,6 @@ input@0 { reg = <0>; - atmel,wakeup-type = "low"; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts index 6783cf16ff81..46722a163184 100644 --- a/arch/arm/boot/dts/at91-sama5d2_icp.dts +++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts @@ -697,7 +697,6 @@ input@0 { reg = <0>; - atmel,wakeup-type = "low"; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts index c894c7c788a9..8de57d164acd 100644 --- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts @@ -206,7 +206,6 @@ input@0 { reg = <0>; - atmel,wakeup-type = "low"; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 058fae1b4a76..4e7cf21f124c 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -351,7 +351,6 @@ input@0 { reg = <0>; - atmel,wakeup-type = "low"; }; }; diff --git a/arch/arm/boot/dts/atlas6-evb.dts b/arch/arm/boot/dts/atlas6-evb.dts deleted file mode 100644 index 89e430392f26..000000000000 --- a/arch/arm/boot/dts/atlas6-evb.dts +++ /dev/null @@ -1,78 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * DTS file for CSR SiRFatlas6 Evaluation Board - * - * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. - */ - -/dts-v1/; - -/include/ "atlas6.dtsi" - -/ { - model = "CSR SiRFatlas6 Evaluation Board"; - compatible = "sirf,atlas6-cb", "sirf,atlas6"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; - }; - - axi { - peri-iobg { - uart@b0060000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_a>; - }; - spi@b00d0000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>; - spi@0 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <1000000>; - }; - }; - spi@b0170000 { - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins_a>; - }; - i2c0: i2c@b00e0000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - lcd@40 { - compatible = "sirf,lcd"; - reg = <0x40>; - }; - }; - - }; - disp-iobg { - lcd@90010000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&lcd_24pins_a>; - }; - }; - }; - display: display@0 { - panels { - panel0: panel@0 { - panel-name = "Innolux TFT"; - hactive = <800>; - vactive = <480>; - left_margin = <20>; - right_margin = <234>; - upper_margin = <3>; - lower_margin = <41>; - hsync_len = <3>; - vsync_len = <2>; - pixclock = <33264000>; - sync = <3>; - timing = <0x88>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi deleted file mode 100644 index 8ac5d1524a43..000000000000 --- a/arch/arm/boot/dts/atlas6.dtsi +++ /dev/null @@ -1,800 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * DTS file for CSR SiRFatlas6 SoC - * - * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. - */ - -/ { - compatible = "sirf,atlas6"; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&intc>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - reg = <0x0>; - d-cache-line-size = <32>; - i-cache-line-size = <32>; - d-cache-size = <32768>; - i-cache-size = <32768>; - /* from bootloader */ - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - clocks = <&clks 12>; - operating-points = < - /* kHz uV */ - 200000 1025000 - 400000 1025000 - 600000 1050000 - 800000 1100000 - >; - clock-latency = <150000>; - }; - }; - - arm-pmu { - compatible = "arm,cortex-a9-pmu"; - interrupts = <29>; - }; - - axi { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x40000000 0x40000000 0x80000000>; - - intc: interrupt-controller@80020000 { - #interrupt-cells = <1>; - interrupt-controller; - compatible = "sirf,prima2-intc"; - reg = <0x80020000 0x1000>; - }; - - sys-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x88000000 0x88000000 0x40000>; - - clks: clock-controller@88000000 { - compatible = "sirf,atlas6-clkc"; - reg = <0x88000000 0x1000>; - interrupts = <3>; - #clock-cells = <1>; - }; - - rstc: reset-controller@88010000 { - compatible = "sirf,prima2-rstc"; - reg = <0x88010000 0x1000>; - #reset-cells = <1>; - }; - - rsc-controller@88020000 { - compatible = "sirf,prima2-rsc"; - reg = <0x88020000 0x1000>; - }; - - cphifbg@88030000 { - compatible = "sirf,prima2-cphifbg"; - reg = <0x88030000 0x1000>; - clocks = <&clks 42>; - }; - }; - - mem-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x90000000 0x90000000 0x10000>; - - memory-controller@90000000 { - compatible = "sirf,prima2-memc"; - reg = <0x90000000 0x2000>; - interrupts = <27>; - clocks = <&clks 5>; - }; - - memc-monitor { - compatible = "sirf,prima2-memcmon"; - reg = <0x90002000 0x200>; - interrupts = <4>; - clocks = <&clks 32>; - }; - }; - - disp-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x90010000 0x90010000 0x30000>; - - lcd@90010000 { - compatible = "sirf,prima2-lcd"; - reg = <0x90010000 0x20000>; - interrupts = <30>; - clocks = <&clks 34>; - display=<&display>; - /* later transfer to pwm */ - bl-gpio = <&gpio 7 0>; - default-panel = <&panel0>; - }; - - vpp@90020000 { - compatible = "sirf,prima2-vpp"; - reg = <0x90020000 0x10000>; - interrupts = <31>; - clocks = <&clks 35>; - resets = <&rstc 6>; - }; - }; - - graphics-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x98000000 0x98000000 0x8000000>; - - graphics@98000000 { - compatible = "powervr,sgx510"; - reg = <0x98000000 0x8000000>; - interrupts = <6>; - clocks = <&clks 32>; - }; - }; - - graphics2d-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xa0000000 0xa0000000 0x8000000>; - - ble@a0000000 { - compatible = "sirf,atlas6-ble"; - reg = <0xa0000000 0x2000>; - interrupts = <5>; - clocks = <&clks 33>; - }; - }; - - dsp-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xa8000000 0xa8000000 0x2000000>; - - dspif@a8000000 { - compatible = "sirf,prima2-dspif"; - reg = <0xa8000000 0x10000>; - interrupts = <9>; - resets = <&rstc 1>; - }; - - gps@a8010000 { - compatible = "sirf,prima2-gps"; - reg = <0xa8010000 0x10000>; - interrupts = <7>; - clocks = <&clks 9>; - resets = <&rstc 2>; - }; - - dsp@a9000000 { - compatible = "sirf,prima2-dsp"; - reg = <0xa9000000 0x1000000>; - interrupts = <8>; - clocks = <&clks 8>; - resets = <&rstc 0>; - }; - }; - - peri-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xb0000000 0xb0000000 0x180000>, - <0x56000000 0x56000000 0x1b00000>; - - timer@b0020000 { - compatible = "sirf,prima2-tick"; - reg = <0xb0020000 0x1000>; - interrupts = <0>; - clocks = <&clks 11>; - }; - - nand@b0030000 { - compatible = "sirf,prima2-nand"; - reg = <0xb0030000 0x10000>; - interrupts = <41>; - clocks = <&clks 26>; - }; - - audio@b0040000 { - compatible = "sirf,prima2-audio"; - reg = <0xb0040000 0x10000>; - interrupts = <35>; - clocks = <&clks 27>; - }; - - uart0: uart@b0050000 { - cell-index = <0>; - compatible = "sirf,prima2-uart"; - reg = <0xb0050000 0x1000>; - interrupts = <17>; - fifosize = <128>; - clocks = <&clks 13>; - dmas = <&dmac1 5>, <&dmac0 2>; - dma-names = "rx", "tx"; - }; - - uart1: uart@b0060000 { - cell-index = <1>; - compatible = "sirf,prima2-uart"; - reg = <0xb0060000 0x1000>; - interrupts = <18>; - fifosize = <32>; - clocks = <&clks 14>; - dma-names = "no-rx", "no-tx"; - }; - - uart2: uart@b0070000 { - cell-index = <2>; - compatible = "sirf,prima2-uart"; - reg = <0xb0070000 0x1000>; - interrupts = <19>; - fifosize = <128>; - clocks = <&clks 15>; - dmas = <&dmac0 6>, <&dmac0 7>; - dma-names = "rx", "tx"; - }; - - usp0: usp@b0080000 { - cell-index = <0>; - compatible = "sirf,prima2-usp"; - reg = <0xb0080000 0x10000>; - interrupts = <20>; - fifosize = <128>; - clocks = <&clks 28>; - dmas = <&dmac1 1>, <&dmac1 2>; - dma-names = "rx", "tx"; - }; - - usp1: usp@b0090000 { - cell-index = <1>; - compatible = "sirf,prima2-usp"; - reg = <0xb0090000 0x10000>; - interrupts = <21>; - fifosize = <128>; - clocks = <&clks 29>; - dmas = <&dmac0 14>, <&dmac0 15>; - dma-names = "rx", "tx"; - }; - - dmac0: dma-controller@b00b0000 { - cell-index = <0>; - compatible = "sirf,prima2-dmac"; - reg = <0xb00b0000 0x10000>; - interrupts = <12>; - clocks = <&clks 24>; - #dma-cells = <1>; - }; - - dmac1: dma-controller@b0160000 { - cell-index = <1>; - compatible = "sirf,prima2-dmac"; - reg = <0xb0160000 0x10000>; - interrupts = <13>; - clocks = <&clks 25>; - #dma-cells = <1>; - }; - - vip@b00C0000 { - compatible = "sirf,prima2-vip"; - reg = <0xb00C0000 0x10000>; - clocks = <&clks 31>; - interrupts = <14>; - sirf,vip-dma-rx-channel = <16>; - }; - - spi0: spi@b00d0000 { - cell-index = <0>; - compatible = "sirf,prima2-spi"; - reg = <0xb00d0000 0x10000>; - interrupts = <15>; - sirf,spi-num-chipselects = <1>; - dmas = <&dmac1 9>, - <&dmac1 4>; - dma-names = "rx", "tx"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clks 19>; - resets = <&rstc 26>; - status = "disabled"; - }; - - spi1: spi@b0170000 { - cell-index = <1>; - compatible = "sirf,prima2-spi"; - reg = <0xb0170000 0x10000>; - interrupts = <16>; - sirf,spi-num-chipselects = <1>; - dmas = <&dmac0 12>, - <&dmac0 13>; - dma-names = "rx", "tx"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clks 20>; - resets = <&rstc 27>; - status = "disabled"; - }; - - i2c0: i2c@b00e0000 { - cell-index = <0>; - compatible = "sirf,prima2-i2c"; - reg = <0xb00e0000 0x10000>; - interrupts = <24>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clks 17>; - }; - - i2c1: i2c@b00f0000 { - cell-index = <1>; - compatible = "sirf,prima2-i2c"; - reg = <0xb00f0000 0x10000>; - interrupts = <25>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clks 18>; - }; - - tsc@b0110000 { - compatible = "sirf,prima2-tsc"; - reg = <0xb0110000 0x10000>; - interrupts = <33>; - clocks = <&clks 16>; - }; - - gpio: pinctrl@b0120000 { - #gpio-cells = <2>; - #interrupt-cells = <2>; - compatible = "sirf,atlas6-pinctrl"; - reg = <0xb0120000 0x10000>; - interrupts = <43 44 45 46 47>; - gpio-controller; - interrupt-controller; - - lcd_16pins_a: lcd0@0 { - lcd { - sirf,pins = "lcd_16bitsgrp"; - sirf,function = "lcd_16bits"; - }; - }; - lcd_18pins_a: lcd0@1 { - lcd { - sirf,pins = "lcd_18bitsgrp"; - sirf,function = "lcd_18bits"; - }; - }; - lcd_24pins_a: lcd0@2 { - lcd { - sirf,pins = "lcd_24bitsgrp"; - sirf,function = "lcd_24bits"; - }; - }; - lcdrom_pins_a: lcdrom0@0 { - lcd { - sirf,pins = "lcdromgrp"; - sirf,function = "lcdrom"; - }; - }; - uart0_pins_a: uart0@0 { - uart { - sirf,pins = "uart0grp"; - sirf,function = "uart0"; - }; - }; - uart0_noflow_pins_a: uart0@1 { - uart { - sirf,pins = "uart0_nostreamctrlgrp"; - sirf,function = "uart0_nostreamctrl"; - }; - }; - uart1_pins_a: uart1@0 { - uart { - sirf,pins = "uart1grp"; - sirf,function = "uart1"; - }; - }; - uart2_pins_a: uart2@0 { - uart { - sirf,pins = "uart2grp"; - sirf,function = "uart2"; - }; - }; - uart2_noflow_pins_a: uart2@1 { - uart { - sirf,pins = "uart2_nostreamctrlgrp"; - sirf,function = "uart2_nostreamctrl"; - }; - }; - spi0_pins_a: spi0@0 { - spi { - sirf,pins = "spi0grp"; - sirf,function = "spi0"; - }; - }; - spi1_pins_a: spi1@0 { - spi { - sirf,pins = "spi1grp"; - sirf,function = "spi1"; - }; - }; - i2c0_pins_a: i2c0@0 { - i2c { - sirf,pins = "i2c0grp"; - sirf,function = "i2c0"; - }; - }; - i2c1_pins_a: i2c1@0 { - i2c { - sirf,pins = "i2c1grp"; - sirf,function = "i2c1"; - }; - }; - pwm0_pins_a: pwm0@0 { - pwm { - sirf,pins = "pwm0grp"; - sirf,function = "pwm0"; - }; - }; - pwm1_pins_a: pwm1@0 { - pwm { - sirf,pins = "pwm1grp"; - sirf,function = "pwm1"; - }; - }; - pwm2_pins_a: pwm2@0 { - pwm { - sirf,pins = "pwm2grp"; - sirf,function = "pwm2"; - }; - }; - pwm3_pins_a: pwm3@0 { - pwm { - sirf,pins = "pwm3grp"; - sirf,function = "pwm3"; - }; - }; - pwm4_pins_a: pwm4@0 { - pwm { - sirf,pins = "pwm4grp"; - sirf,function = "pwm4"; - }; - }; - gps_pins_a: gps@0 { - gps { - sirf,pins = "gpsgrp"; - sirf,function = "gps"; - }; - }; - vip_pins_a: vip@0 { - vip { - sirf,pins = "vipgrp"; - sirf,function = "vip"; - }; - }; - sdmmc0_pins_a: sdmmc0@0 { - sdmmc0 { - sirf,pins = "sdmmc0grp"; - sirf,function = "sdmmc0"; - }; - }; - sdmmc1_pins_a: sdmmc1@0 { - sdmmc1 { - sirf,pins = "sdmmc1grp"; - sirf,function = "sdmmc1"; - }; - }; - sdmmc2_pins_a: sdmmc2@0 { - sdmmc2 { - sirf,pins = "sdmmc2grp"; - sirf,function = "sdmmc2"; - }; - }; - sdmmc2_nowp_pins_a: sdmmc2_nowp@0 { - sdmmc2_nowp { - sirf,pins = "sdmmc2_nowpgrp"; - sirf,function = "sdmmc2_nowp"; - }; - }; - sdmmc3_pins_a: sdmmc3@0 { - sdmmc3 { - sirf,pins = "sdmmc3grp"; - sirf,function = "sdmmc3"; - }; - }; - sdmmc5_pins_a: sdmmc5@0 { - sdmmc5 { - sirf,pins = "sdmmc5grp"; - sirf,function = "sdmmc5"; - }; - }; - i2s_mclk_pins_a: i2s_mclk@0 { - i2s_mclk { - sirf,pins = "i2smclkgrp"; - sirf,function = "i2s_mclk"; - }; - }; - i2s_ext_clk_input_pins_a: i2s_ext_clk_input@0 { - i2s_ext_clk_input { - sirf,pins = "i2s_ext_clk_inputgrp"; - sirf,function = "i2s_ext_clk_input"; - }; - }; - i2s_pins_a: i2s@0 { - i2s { - sirf,pins = "i2sgrp"; - sirf,function = "i2s"; - }; - }; - i2s_no_din_pins_a: i2s_no_din@0 { - i2s_no_din { - sirf,pins = "i2s_no_dingrp"; - sirf,function = "i2s_no_din"; - }; - }; - i2s_6chn_pins_a: i2s_6chn@0 { - i2s_6chn { - sirf,pins = "i2s_6chngrp"; - sirf,function = "i2s_6chn"; - }; - }; - ac97_pins_a: ac97@0 { - ac97 { - sirf,pins = "ac97grp"; - sirf,function = "ac97"; - }; - }; - nand_pins_a: nand@0 { - nand { - sirf,pins = "nandgrp"; - sirf,function = "nand"; - }; - }; - usp0_pins_a: usp0@0 { - usp0 { - sirf,pins = "usp0grp"; - sirf,function = "usp0"; - }; - }; - usp0_uart_nostreamctrl_pins_a: usp0@1 { - usp0 { - sirf,pins = "usp0_uart_nostreamctrl_grp"; - sirf,function = "usp0_uart_nostreamctrl"; - }; - }; - usp0_only_utfs_pins_a: usp0@2 { - usp0 { - sirf,pins = "usp0_only_utfs_grp"; - sirf,function = "usp0_only_utfs"; - }; - }; - usp0_only_urfs_pins_a: usp0@3 { - usp0 { - sirf,pins = "usp0_only_urfs_grp"; - sirf,function = "usp0_only_urfs"; - }; - }; - usp1_pins_a: usp1@0 { - usp1 { - sirf,pins = "usp1grp"; - sirf,function = "usp1"; - }; - }; - usp1_uart_nostreamctrl_pins_a: usp1@1 { - usp1 { - sirf,pins = "usp1_uart_nostreamctrl_grp"; - sirf,function = "usp1_uart_nostreamctrl"; - }; - }; - usb0_upli_drvbus_pins_a: usb0_upli_drvbus@0 { - usb0_upli_drvbus { - sirf,pins = "usb0_upli_drvbusgrp"; - sirf,function = "usb0_upli_drvbus"; - }; - }; - usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus@0 { - usb1_utmi_drvbus { - sirf,pins = "usb1_utmi_drvbusgrp"; - sirf,function = "usb1_utmi_drvbus"; - }; - }; - usb1_dp_dn_pins_a: usb1_dp_dn@0 { - usb1_dp_dn { - sirf,pins = "usb1_dp_dngrp"; - sirf,function = "usb1_dp_dn"; - }; - }; - uart1_route_io_usb1_pins_a: uart1_route_io_usb1@0 { - uart1_route_io_usb1 { - sirf,pins = "uart1_route_io_usb1grp"; - sirf,function = "uart1_route_io_usb1"; - }; - }; - warm_rst_pins_a: warm_rst@0 { - warm_rst { - sirf,pins = "warm_rstgrp"; - sirf,function = "warm_rst"; - }; - }; - pulse_count_pins_a: pulse_count@0 { - pulse_count { - sirf,pins = "pulse_countgrp"; - sirf,function = "pulse_count"; - }; - }; - cko0_pins_a: cko0@0 { - cko0 { - sirf,pins = "cko0grp"; - sirf,function = "cko0"; - }; - }; - cko1_pins_a: cko1@0 { - cko1 { - sirf,pins = "cko1grp"; - sirf,function = "cko1"; - }; - }; - }; - - pwm@b0130000 { - compatible = "sirf,prima2-pwm"; - reg = <0xb0130000 0x10000>; - clocks = <&clks 21>; - }; - - efusesys@b0140000 { - compatible = "sirf,prima2-efuse"; - reg = <0xb0140000 0x10000>; - clocks = <&clks 22>; - }; - - pulsec@b0150000 { - compatible = "sirf,prima2-pulsec"; - reg = <0xb0150000 0x10000>; - interrupts = <48>; - clocks = <&clks 23>; - }; - - pci-iobg { - compatible = "sirf,prima2-pciiobg", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x56000000 0x56000000 0x1b00000>; - - sd0: sdhci@56000000 { - cell-index = <0>; - compatible = "sirf,prima2-sdhc"; - reg = <0x56000000 0x100000>; - interrupts = <38>; - bus-width = <8>; - clocks = <&clks 36>; - }; - - sd1: sdhci@56100000 { - cell-index = <1>; - compatible = "sirf,prima2-sdhc"; - reg = <0x56100000 0x100000>; - interrupts = <38>; - status = "disabled"; - bus-width = <4>; - clocks = <&clks 36>; - }; - - sd2: sdhci@56200000 { - cell-index = <2>; - compatible = "sirf,prima2-sdhc"; - reg = <0x56200000 0x100000>; - interrupts = <23>; - status = "disabled"; - bus-width = <4>; - clocks = <&clks 37>; - }; - - sd3: sdhci@56300000 { - cell-index = <3>; - compatible = "sirf,prima2-sdhc"; - reg = <0x56300000 0x100000>; - interrupts = <23>; - status = "disabled"; - bus-width = <4>; - clocks = <&clks 37>; - }; - - sd5: sdhci@56500000 { - cell-index = <5>; - compatible = "sirf,prima2-sdhc"; - reg = <0x56500000 0x100000>; - interrupts = <39>; - status = "disabled"; - bus-width = <4>; - clocks = <&clks 38>; - }; - - pci-copy@57900000 { - compatible = "sirf,prima2-pcicp"; - reg = <0x57900000 0x100000>; - interrupts = <40>; - }; - - rom-interface@57a00000 { - compatible = "sirf,prima2-romif"; - reg = <0x57a00000 0x100000>; - }; - }; - }; - - rtc-iobg { - compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x80030000 0x10000>; - - gpsrtc@1000 { - compatible = "sirf,prima2-gpsrtc"; - reg = <0x1000 0x1000>; - interrupts = <55 56 57>; - }; - - sysrtc@2000 { - compatible = "sirf,prima2-sysrtc"; - reg = <0x2000 0x1000>; - interrupts = <52 53 54>; - }; - - minigpsrtc@2000 { - compatible = "sirf,prima2-minigpsrtc"; - reg = <0x2000 0x1000>; - interrupts = <54>; - }; - - pwrc@3000 { - compatible = "sirf,prima2-pwrc"; - reg = <0x3000 0x1000>; - interrupts = <32>; - }; - }; - - uus-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xb8000000 0xb8000000 0x40000>; - - usb0: usb@b00e0000 { - compatible = "chipidea,ci13611a-prima2"; - reg = <0xb8000000 0x10000>; - interrupts = <10>; - clocks = <&clks 40>; - }; - - usb1: usb@b00f0000 { - compatible = "chipidea,ci13611a-prima2"; - reg = <0xb8010000 0x10000>; - interrupts = <11>; - clocks = <&clks 41>; - }; - - security@b00f0000 { - compatible = "sirf,prima2-security"; - reg = <0xb8030000 0x10000>; - interrupts = <42>; - clocks = <&clks 7>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/atlas7-evb.dts b/arch/arm/boot/dts/atlas7-evb.dts deleted file mode 100644 index e0515043d145..000000000000 --- a/arch/arm/boot/dts/atlas7-evb.dts +++ /dev/null @@ -1,127 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * DTS file for CSR SiRFatlas7 Evaluation Board - * - * Copyright (c) 2014 Cambridge Silicon Radio Limited, a CSR plc group company. - */ - -/dts-v1/; - -/include/ "atlas7.dtsi" - -#include <dt-bindings/input/input.h> -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "CSR SiRFatlas7 Evaluation Board"; - compatible = "sirf,atlas7-cb", "sirf,atlas7"; - - chosen { - bootargs = "console=ttySiRF1,115200 earlyprintk"; - }; - - memory { - device_type = "memory"; - reg = <0x40000000 0x20000000>; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - vpp_reserved: vpp_mem@5e800000 { - compatible = "sirf,reserved-memory"; - reg = <0x5e800000 0x800000>; - }; - - nanddisk_reserved: nanddisk@46000000 { - reg = <0x46000000 0x200000>; - no-map; - }; - }; - - - noc { - mediam { - nand@17050000 { - memory-region = <&nanddisk_reserved>; - }; - }; - - gnssm { - spi1: spi@18200000 { - status = "okay"; - spiflash: macronix@0{ - status = "okay"; - compatible = "macronix,mx25l6405d"; - reg = <0>; - spi-max-frequency = <37500000>; - spi-cpha; - spi-cpol; - #address-cells = <1>; - #size-cells = <1>; - partitions@0 { - label = "myspiboot"; - reg = <0x0 0x800000>; - }; - }; - }; - }; - - btm { - uart6: uart@11000000 { - status = "okay"; - uart-has-rtscts; - }; - }; - - disp-iobg { - vpp@13110000 { - memory-region = <&vpp_reserved>; - }; - }; - - display0: display@0 { - compatible = "lvds-panel"; - source = "lvds.0"; - - bl-gpios = <&gpio_1 63 0>; - data-lines = <24>; - - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <60000000>; - hactive = <1024>; - vactive = <600>; - hfront-porch = <220>; - hback-porch = <100>; - hsync-len = <1>; - vback-porch = <10>; - vfront-porch = <25>; - vsync-len = <1>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - rearview_key { - label = "rearview key"; - linux,code = <KEY_CAMERA>; - gpios = <&gpio_1 3 GPIO_ACTIVE_LOW>; - debounce-interval = <100>; - }; - }; - - }; -}; diff --git a/arch/arm/boot/dts/atlas7.dtsi b/arch/arm/boot/dts/atlas7.dtsi deleted file mode 100644 index 99c9d9d9267f..000000000000 --- a/arch/arm/boot/dts/atlas7.dtsi +++ /dev/null @@ -1,1955 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * DTS file for CSR SiRFatlas7 SoC - * - * Copyright (c) 2014 Cambridge Silicon Radio Limited, a CSR plc group company. - */ - -/ { - compatible = "sirf,atlas7"; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&gic>; - aliases { - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; - serial3 = &uart3; - serial4 = &uart4; - serial5 = &uart5; - serial6 = &uart6; - serial9 = &usp2; - spi1 = &spi1; - spi2 = &usp1; - spi3 = &usp2; - spi4 = &usp3; - }; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <0>; - }; - cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a7"; - reg = <1>; - }; - }; - - clocks { - xinw { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "xinw"; - }; - xin { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <26000000>; - clock-output-names = "xin"; - }; - }; - - arm-pmu { - compatible = "arm,cortex-a7-pmu"; - interrupts = <0 29 4>, <0 82 4>; - }; - - noc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x10000000 0x10000000 0xc0000000>; - - gic: interrupt-controller@10301000 { - compatible = "arm,cortex-a9-gic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0x10301000 0x1000>, - <0x10302000 0x0100>; - }; - - pmu_regulator: pmu_regulator@10E30020 { - compatible = "sirf,atlas7-pmu-ldo"; - reg = <0x10E30020 0x4>; - ldo: ldo { - regulator-name = "ldo"; - }; - }; - - atlas7_codec: atlas7_codec@10E30000 { - #sound-dai-cells = <0>; - compatible = "sirf,atlas7-codec"; - reg = <0x10E30000 0x400>; - clocks = <&car 62>; - ldo-supply = <&ldo>; - }; - - atlas7_iacc: atlas7_iacc@10D01000 { - #sound-dai-cells = <0>; - compatible = "sirf,atlas7-iacc"; - reg = <0x10D01000 0x100>; - dmas = <&dmac3 0>, <&dmac3 7>, <&dmac3 8>, - <&dmac3 3>, <&dmac3 9>; - dma-names = "rx", "tx0", "tx1", "tx2", "tx3"; - clocks = <&car 62>; - }; - - ipc@13240000 { - compatible = "sirf,atlas7-ipc"; - ranges = <0x13240000 0x13240000 0x00010000>; - #address-cells = <1>; - #size-cells = <1>; - - hwspinlock { - compatible = "sirf,hwspinlock"; - reg = <0x13240000 0x00010000>; - - num-spinlocks = <30>; - }; - - ns_m3_rproc@0 { - compatible = "sirf,ns2m30-rproc"; - reg = <0x13240000 0x00010000>; - interrupts = <0 123 0>; - }; - - ns_m3_rproc@1 { - compatible = "sirf,ns2m31-rproc"; - reg = <0x13240000 0x00010000>; - interrupts = <0 126 0>; - }; - - ns_kal_rproc@0 { - compatible = "sirf,ns2kal0-rproc"; - reg = <0x13240000 0x00010000>; - interrupts = <0 124 0>; - }; - - ns_kal_rproc@1 { - compatible = "sirf,ns2kal1-rproc"; - reg = <0x13240000 0x00010000>; - interrupts = <0 127 0>; - }; - }; - - pinctrl: ioc@18880000 { - compatible = "sirf,atlas7-ioc"; - reg = <0x18880000 0x1000>, - <0x10E40000 0x1000>; - - audio_ac97_pmx: audio_ac97@0 { - audio_ac97 { - groups = "audio_ac97_grp"; - function = "audio_ac97"; - }; - }; - - audio_func_dbg_pmx: audio_func_dbg@0 { - audio_func_dbg { - groups = "audio_func_dbg_grp"; - function = "audio_func_dbg"; - }; - }; - - audio_i2s_pmx: audio_i2s@0 { - audio_i2s { - groups = "audio_i2s_grp"; - function = "audio_i2s"; - }; - }; - - audio_i2s_2ch_pmx: audio_i2s_2ch@0 { - audio_i2s_2ch { - groups = "audio_i2s_2ch_grp"; - function = "audio_i2s_2ch"; - }; - }; - - audio_i2s_extclk_pmx: audio_i2s_extclk@0 { - audio_i2s_extclk { - groups = "audio_i2s_extclk_grp"; - function = "audio_i2s_extclk"; - }; - }; - - audio_uart0_pmx: audio_uart0@0 { - audio_uart0 { - groups = "audio_uart0_grp"; - function = "audio_uart0"; - }; - }; - - audio_uart1_pmx: audio_uart1@0 { - audio_uart1 { - groups = "audio_uart1_grp"; - function = "audio_uart1"; - }; - }; - - audio_uart2_pmx0: audio_uart2@0 { - audio_uart2_0 { - groups = "audio_uart2_grp0"; - function = "audio_uart2_m0"; - }; - }; - - audio_uart2_pmx1: audio_uart2@1 { - audio_uart2_1 { - groups = "audio_uart2_grp1"; - function = "audio_uart2_m1"; - }; - }; - - c_can_trnsvr_pmx: c_can_trnsvr@0 { - c_can_trnsvr { - groups = "c_can_trnsvr_grp"; - function = "c_can_trnsvr"; - }; - }; - - c0_can_pmx0: c0_can@0 { - c0_can_0 { - groups = "c0_can_grp0"; - function = "c0_can_m0"; - }; - }; - - c0_can_pmx1: c0_can@1 { - c0_can_1 { - groups = "c0_can_grp1"; - function = "c0_can_m1"; - }; - }; - - c1_can_pmx0: c1_can@0 { - c1_can_0 { - groups = "c1_can_grp0"; - function = "c1_can_m0"; - }; - }; - - c1_can_pmx1: c1_can@1 { - c1_can_1 { - groups = "c1_can_grp1"; - function = "c1_can_m1"; - }; - }; - - c1_can_pmx2: c1_can@2 { - c1_can_2 { - groups = "c1_can_grp2"; - function = "c1_can_m2"; - }; - }; - - ca_audio_lpc_pmx: ca_audio_lpc@0 { - ca_audio_lpc { - groups = "ca_audio_lpc_grp"; - function = "ca_audio_lpc"; - }; - }; - - ca_bt_lpc_pmx: ca_bt_lpc@0 { - ca_bt_lpc { - groups = "ca_bt_lpc_grp"; - function = "ca_bt_lpc"; - }; - }; - - ca_coex_pmx: ca_coex@0 { - ca_coex { - groups = "ca_coex_grp"; - function = "ca_coex"; - }; - }; - - ca_curator_lpc_pmx: ca_curator_lpc@0 { - ca_curator_lpc { - groups = "ca_curator_lpc_grp"; - function = "ca_curator_lpc"; - }; - }; - - ca_pcm_debug_pmx: ca_pcm_debug@0 { - ca_pcm_debug { - groups = "ca_pcm_debug_grp"; - function = "ca_pcm_debug"; - }; - }; - - ca_pio_pmx: ca_pio@0 { - ca_pio { - groups = "ca_pio_grp"; - function = "ca_pio"; - }; - }; - - ca_sdio_debug_pmx: ca_sdio_debug@0 { - ca_sdio_debug { - groups = "ca_sdio_debug_grp"; - function = "ca_sdio_debug"; - }; - }; - - ca_spi_pmx: ca_spi@0 { - ca_spi { - groups = "ca_spi_grp"; - function = "ca_spi"; - }; - }; - - ca_trb_pmx: ca_trb@0 { - ca_trb { - groups = "ca_trb_grp"; - function = "ca_trb"; - }; - }; - - ca_uart_debug_pmx: ca_uart_debug@0 { - ca_uart_debug { - groups = "ca_uart_debug_grp"; - function = "ca_uart_debug"; - }; - }; - - clkc_pmx0: clkc@0 { - clkc_0 { - groups = "clkc_grp0"; - function = "clkc_m0"; - }; - }; - - clkc_pmx1: clkc@1 { - clkc_1 { - groups = "clkc_grp1"; - function = "clkc_m1"; - }; - }; - - gn_gnss_i2c_pmx: gn_gnss_i2c@0 { - gn_gnss_i2c { - groups = "gn_gnss_i2c_grp"; - function = "gn_gnss_i2c"; - }; - }; - - gn_gnss_uart_nopause_pmx: gn_gnss_uart_nopause@0 { - gn_gnss_uart_nopause { - groups = "gn_gnss_uart_nopause_grp"; - function = "gn_gnss_uart_nopause"; - }; - }; - - gn_gnss_uart_pmx: gn_gnss_uart@0 { - gn_gnss_uart { - groups = "gn_gnss_uart_grp"; - function = "gn_gnss_uart"; - }; - }; - - gn_trg_spi_pmx0: gn_trg_spi@0 { - gn_trg_spi_0 { - groups = "gn_trg_spi_grp0"; - function = "gn_trg_spi_m0"; - }; - }; - - gn_trg_spi_pmx1: gn_trg_spi@1 { - gn_trg_spi_1 { - groups = "gn_trg_spi_grp1"; - function = "gn_trg_spi_m1"; - }; - }; - - cvbs_dbg_pmx: cvbs_dbg@0 { - cvbs_dbg { - groups = "cvbs_dbg_grp"; - function = "cvbs_dbg"; - }; - }; - - cvbs_dbg_test_pmx0: cvbs_dbg_test@0 { - cvbs_dbg_test_0 { - groups = "cvbs_dbg_test_grp0"; - function = "cvbs_dbg_test_m0"; - }; - }; - - cvbs_dbg_test_pmx1: cvbs_dbg_test@1 { - cvbs_dbg_test_1 { - groups = "cvbs_dbg_test_grp1"; - function = "cvbs_dbg_test_m1"; - }; - }; - - cvbs_dbg_test_pmx2: cvbs_dbg_test@2 { - cvbs_dbg_test_2 { - groups = "cvbs_dbg_test_grp2"; - function = "cvbs_dbg_test_m2"; - }; - }; - - cvbs_dbg_test_pmx3: cvbs_dbg_test@3 { - cvbs_dbg_test_3 { - groups = "cvbs_dbg_test_grp3"; - function = "cvbs_dbg_test_m3"; - }; - }; - - cvbs_dbg_test_pmx4: cvbs_dbg_test@4 { - cvbs_dbg_test_4 { - groups = "cvbs_dbg_test_grp4"; - function = "cvbs_dbg_test_m4"; - }; - }; - - cvbs_dbg_test_pmx5: cvbs_dbg_test@5 { - cvbs_dbg_test_5 { - groups = "cvbs_dbg_test_grp5"; - function = "cvbs_dbg_test_m5"; - }; - }; - - cvbs_dbg_test_pmx6: cvbs_dbg_test@6 { - cvbs_dbg_test_6 { - groups = "cvbs_dbg_test_grp6"; - function = "cvbs_dbg_test_m6"; - }; - }; - - cvbs_dbg_test_pmx7: cvbs_dbg_test@7 { - cvbs_dbg_test_7 { - groups = "cvbs_dbg_test_grp7"; - function = "cvbs_dbg_test_m7"; - }; - }; - - cvbs_dbg_test_pmx8: cvbs_dbg_test@8 { - cvbs_dbg_test_8 { - groups = "cvbs_dbg_test_grp8"; - function = "cvbs_dbg_test_m8"; - }; - }; - - cvbs_dbg_test_pmx9: cvbs_dbg_test@9 { - cvbs_dbg_test_9 { - groups = "cvbs_dbg_test_grp9"; - function = "cvbs_dbg_test_m9"; - }; - }; - - cvbs_dbg_test_pmx10: cvbs_dbg_test@10 { - cvbs_dbg_test_10 { - groups = "cvbs_dbg_test_grp10"; - function = "cvbs_dbg_test_m10"; - }; - }; - - cvbs_dbg_test_pmx11: cvbs_dbg_test@11 { - cvbs_dbg_test_11 { - groups = "cvbs_dbg_test_grp11"; - function = "cvbs_dbg_test_m11"; - }; - }; - - cvbs_dbg_test_pmx12: cvbs_dbg_test@12 { - cvbs_dbg_test_12 { - groups = "cvbs_dbg_test_grp12"; - function = "cvbs_dbg_test_m12"; - }; - }; - - cvbs_dbg_test_pmx13: cvbs_dbg_test@13 { - cvbs_dbg_test_13 { - groups = "cvbs_dbg_test_grp13"; - function = "cvbs_dbg_test_m13"; - }; - }; - - cvbs_dbg_test_pmx14: cvbs_dbg_test@14 { - cvbs_dbg_test_14 { - groups = "cvbs_dbg_test_grp14"; - function = "cvbs_dbg_test_m14"; - }; - }; - - cvbs_dbg_test_pmx15: cvbs_dbg_test@15 { - cvbs_dbg_test_15 { - groups = "cvbs_dbg_test_grp15"; - function = "cvbs_dbg_test_m15"; - }; - }; - - gn_gnss_power_pmx: gn_gnss_power@0 { - gn_gnss_power { - groups = "gn_gnss_power_grp"; - function = "gn_gnss_power"; - }; - }; - - gn_gnss_sw_status_pmx: gn_gnss_sw_status@0 { - gn_gnss_sw_status { - groups = "gn_gnss_sw_status_grp"; - function = "gn_gnss_sw_status"; - }; - }; - - gn_gnss_eclk_pmx: gn_gnss_eclk@0 { - gn_gnss_eclk { - groups = "gn_gnss_eclk_grp"; - function = "gn_gnss_eclk"; - }; - }; - - gn_gnss_irq1_pmx0: gn_gnss_irq1@0 { - gn_gnss_irq1_0 { - groups = "gn_gnss_irq1_grp0"; - function = "gn_gnss_irq1_m0"; - }; - }; - - gn_gnss_irq2_pmx0: gn_gnss_irq2@0 { - gn_gnss_irq2_0 { - groups = "gn_gnss_irq2_grp0"; - function = "gn_gnss_irq2_m0"; - }; - }; - - gn_gnss_tm_pmx: gn_gnss_tm@0 { - gn_gnss_tm { - groups = "gn_gnss_tm_grp"; - function = "gn_gnss_tm"; - }; - }; - - gn_gnss_tsync_pmx: gn_gnss_tsync@0 { - gn_gnss_tsync { - groups = "gn_gnss_tsync_grp"; - function = "gn_gnss_tsync"; - }; - }; - - gn_io_gnsssys_sw_cfg_pmx: gn_io_gnsssys_sw_cfg@0 { - gn_io_gnsssys_sw_cfg { - groups = "gn_io_gnsssys_sw_cfg_grp"; - function = "gn_io_gnsssys_sw_cfg"; - }; - }; - - gn_trg_pmx0: gn_trg@0 { - gn_trg_0 { - groups = "gn_trg_grp0"; - function = "gn_trg_m0"; - }; - }; - - gn_trg_pmx1: gn_trg@1 { - gn_trg_1 { - groups = "gn_trg_grp1"; - function = "gn_trg_m1"; - }; - }; - - gn_trg_shutdown_pmx0: gn_trg_shutdown@0 { - gn_trg_shutdown_0 { - groups = "gn_trg_shutdown_grp0"; - function = "gn_trg_shutdown_m0"; - }; - }; - - gn_trg_shutdown_pmx1: gn_trg_shutdown@1 { - gn_trg_shutdown_1 { - groups = "gn_trg_shutdown_grp1"; - function = "gn_trg_shutdown_m1"; - }; - }; - - gn_trg_shutdown_pmx2: gn_trg_shutdown@2 { - gn_trg_shutdown_2 { - groups = "gn_trg_shutdown_grp2"; - function = "gn_trg_shutdown_m2"; - }; - }; - - gn_trg_shutdown_pmx3: gn_trg_shutdown@3 { - gn_trg_shutdown_3 { - groups = "gn_trg_shutdown_grp3"; - function = "gn_trg_shutdown_m3"; - }; - }; - - i2c0_pmx: i2c0@0 { - i2c0 { - groups = "i2c0_grp"; - function = "i2c0"; - }; - }; - - i2c1_pmx: i2c1@0 { - i2c1 { - groups = "i2c1_grp"; - function = "i2c1"; - }; - }; - - jtag_pmx0: jtag@0 { - jtag_0 { - groups = "jtag_grp0"; - function = "jtag_m0"; - }; - }; - - ks_kas_spi_pmx0: ks_kas_spi@0 { - ks_kas_spi_0 { - groups = "ks_kas_spi_grp0"; - function = "ks_kas_spi_m0"; - }; - }; - - ld_ldd_pmx: ld_ldd@0 { - ld_ldd { - groups = "ld_ldd_grp"; - function = "ld_ldd"; - }; - }; - - ld_ldd_16bit_pmx: ld_ldd_16bit@0 { - ld_ldd_16bit { - groups = "ld_ldd_16bit_grp"; - function = "ld_ldd_16bit"; - }; - }; - - ld_ldd_fck_pmx: ld_ldd_fck@0 { - ld_ldd_fck { - groups = "ld_ldd_fck_grp"; - function = "ld_ldd_fck"; - }; - }; - - ld_ldd_lck_pmx: ld_ldd_lck@0 { - ld_ldd_lck { - groups = "ld_ldd_lck_grp"; - function = "ld_ldd_lck"; - }; - }; - - lr_lcdrom_pmx: lr_lcdrom@0 { - lr_lcdrom { - groups = "lr_lcdrom_grp"; - function = "lr_lcdrom"; - }; - }; - - lvds_analog_pmx: lvds_analog@0 { - lvds_analog { - groups = "lvds_analog_grp"; - function = "lvds_analog"; - }; - }; - - nd_df_pmx: nd_df@0 { - nd_df { - groups = "nd_df_grp"; - function = "nd_df"; - }; - }; - - nd_df_nowp_pmx: nd_df_nowp@0 { - nd_df_nowp { - groups = "nd_df_nowp_grp"; - function = "nd_df_nowp"; - }; - }; - - ps_pmx: ps@0 { - ps { - groups = "ps_grp"; - function = "ps"; - }; - }; - - pwc_core_on_pmx: pwc_core_on@0 { - pwc_core_on { - groups = "pwc_core_on_grp"; - function = "pwc_core_on"; - }; - }; - - pwc_ext_on_pmx: pwc_ext_on@0 { - pwc_ext_on { - groups = "pwc_ext_on_grp"; - function = "pwc_ext_on"; - }; - }; - - pwc_gpio3_clk_pmx: pwc_gpio3_clk@0 { - pwc_gpio3_clk { - groups = "pwc_gpio3_clk_grp"; - function = "pwc_gpio3_clk"; - }; - }; - - pwc_io_on_pmx: pwc_io_on@0 { - pwc_io_on { - groups = "pwc_io_on_grp"; - function = "pwc_io_on"; - }; - }; - - pwc_lowbatt_b_pmx0: pwc_lowbatt_b@0 { - pwc_lowbatt_b_0 { - groups = "pwc_lowbatt_b_grp0"; - function = "pwc_lowbatt_b_m0"; - }; - }; - - pwc_mem_on_pmx: pwc_mem_on@0 { - pwc_mem_on { - groups = "pwc_mem_on_grp"; - function = "pwc_mem_on"; - }; - }; - - pwc_on_key_b_pmx0: pwc_on_key_b@0 { - pwc_on_key_b_0 { - groups = "pwc_on_key_b_grp0"; - function = "pwc_on_key_b_m0"; - }; - }; - - pwc_wakeup_src0_pmx: pwc_wakeup_src0@0 { - pwc_wakeup_src0 { - groups = "pwc_wakeup_src0_grp"; - function = "pwc_wakeup_src0"; - }; - }; - - pwc_wakeup_src1_pmx: pwc_wakeup_src1@0 { - pwc_wakeup_src1 { - groups = "pwc_wakeup_src1_grp"; - function = "pwc_wakeup_src1"; - }; - }; - - pwc_wakeup_src2_pmx: pwc_wakeup_src2@0 { - pwc_wakeup_src2 { - groups = "pwc_wakeup_src2_grp"; - function = "pwc_wakeup_src2"; - }; - }; - - pwc_wakeup_src3_pmx: pwc_wakeup_src3@0 { - pwc_wakeup_src3 { - groups = "pwc_wakeup_src3_grp"; - function = "pwc_wakeup_src3"; - }; - }; - - pw_cko0_pmx0: pw_cko0@0 { - pw_cko0_0 { - groups = "pw_cko0_grp0"; - function = "pw_cko0_m0"; - }; - }; - - pw_cko0_pmx1: pw_cko0@1 { - pw_cko0_1 { - groups = "pw_cko0_grp1"; - function = "pw_cko0_m1"; - }; - }; - - pw_cko0_pmx2: pw_cko0@2 { - pw_cko0_2 { - groups = "pw_cko0_grp2"; - function = "pw_cko0_m2"; - }; - }; - - pw_cko1_pmx0: pw_cko1@0 { - pw_cko1_0 { - groups = "pw_cko1_grp0"; - function = "pw_cko1_m0"; - }; - }; - - pw_cko1_pmx1: pw_cko1@1 { - pw_cko1_1 { - groups = "pw_cko1_grp1"; - function = "pw_cko1_m1"; - }; - }; - - pw_i2s01_clk_pmx0: pw_i2s01_clk@0 { - pw_i2s01_clk_0 { - groups = "pw_i2s01_clk_grp0"; - function = "pw_i2s01_clk_m0"; - }; - }; - - pw_i2s01_clk_pmx1: pw_i2s01_clk@1 { - pw_i2s01_clk_1 { - groups = "pw_i2s01_clk_grp1"; - function = "pw_i2s01_clk_m1"; - }; - }; - - pw_pwm0_pmx: pw_pwm0@0 { - pw_pwm0 { - groups = "pw_pwm0_grp"; - function = "pw_pwm0"; - }; - }; - - pw_pwm1_pmx: pw_pwm1@0 { - pw_pwm1 { - groups = "pw_pwm1_grp"; - function = "pw_pwm1"; - }; - }; - - pw_pwm2_pmx0: pw_pwm2@0 { - pw_pwm2_0 { - groups = "pw_pwm2_grp0"; - function = "pw_pwm2_m0"; - }; - }; - - pw_pwm2_pmx1: pw_pwm2@1 { - pw_pwm2_1 { - groups = "pw_pwm2_grp1"; - function = "pw_pwm2_m1"; - }; - }; - - pw_pwm3_pmx0: pw_pwm3@0 { - pw_pwm3_0 { - groups = "pw_pwm3_grp0"; - function = "pw_pwm3_m0"; - }; - }; - - pw_pwm3_pmx1: pw_pwm3@1 { - pw_pwm3_1 { - groups = "pw_pwm3_grp1"; - function = "pw_pwm3_m1"; - }; - }; - - pw_pwm_cpu_vol_pmx0: pw_pwm_cpu_vol@0 { - pw_pwm_cpu_vol_0 { - groups = "pw_pwm_cpu_vol_grp0"; - function = "pw_pwm_cpu_vol_m0"; - }; - }; - - pw_pwm_cpu_vol_pmx1: pw_pwm_cpu_vol@1 { - pw_pwm_cpu_vol_1 { - groups = "pw_pwm_cpu_vol_grp1"; - function = "pw_pwm_cpu_vol_m1"; - }; - }; - - pw_backlight_pmx0: pw_backlight@0 { - pw_backlight_0 { - groups = "pw_backlight_grp0"; - function = "pw_backlight_m0"; - }; - }; - - pw_backlight_pmx1: pw_backlight@1 { - pw_backlight_1 { - groups = "pw_backlight_grp1"; - function = "pw_backlight_m1"; - }; - }; - - rg_eth_mac_pmx: rg_eth_mac@0 { - rg_eth_mac { - groups = "rg_eth_mac_grp"; - function = "rg_eth_mac"; - }; - }; - - rg_gmac_phy_intr_n_pmx: rg_gmac_phy_intr_n@0 { - rg_gmac_phy_intr_n { - groups = "rg_gmac_phy_intr_n_grp"; - function = "rg_gmac_phy_intr_n"; - }; - }; - - rg_rgmii_mac_pmx: rg_rgmii_mac@0 { - rg_rgmii_mac { - groups = "rg_rgmii_mac_grp"; - function = "rg_rgmii_mac"; - }; - }; - - rg_rgmii_phy_ref_clk_pmx0: rg_rgmii_phy_ref_clk@0 { - rg_rgmii_phy_ref_clk_0 { - groups = - "rg_rgmii_phy_ref_clk_grp0"; - function = - "rg_rgmii_phy_ref_clk_m0"; - }; - }; - - rg_rgmii_phy_ref_clk_pmx1: rg_rgmii_phy_ref_clk@1 { - rg_rgmii_phy_ref_clk_1 { - groups = - "rg_rgmii_phy_ref_clk_grp1"; - function = - "rg_rgmii_phy_ref_clk_m1"; - }; - }; - - sd0_pmx: sd0@0 { - sd0 { - groups = "sd0_grp"; - function = "sd0"; - }; - }; - - sd0_4bit_pmx: sd0_4bit@0 { - sd0_4bit { - groups = "sd0_4bit_grp"; - function = "sd0_4bit"; - }; - }; - - sd1_pmx: sd1@0 { - sd1 { - groups = "sd1_grp"; - function = "sd1"; - }; - }; - - sd1_4bit_pmx0: sd1_4bit@0 { - sd1_4bit_0 { - groups = "sd1_4bit_grp0"; - function = "sd1_4bit_m0"; - }; - }; - - sd1_4bit_pmx1: sd1_4bit@1 { - sd1_4bit_1 { - groups = "sd1_4bit_grp1"; - function = "sd1_4bit_m1"; - }; - }; - - sd2_pmx0: sd2@0 { - sd2_0 { - groups = "sd2_grp0"; - function = "sd2_m0"; - }; - }; - - sd2_no_cdb_pmx0: sd2_no_cdb@0 { - sd2_no_cdb_0 { - groups = "sd2_no_cdb_grp0"; - function = "sd2_no_cdb_m0"; - }; - }; - - sd3_pmx: sd3@0 { - sd3 { - groups = "sd3_grp"; - function = "sd3"; - }; - }; - - sd5_pmx: sd5@0 { - sd5 { - groups = "sd5_grp"; - function = "sd5"; - }; - }; - - sd6_pmx0: sd6@0 { - sd6_0 { - groups = "sd6_grp0"; - function = "sd6_m0"; - }; - }; - - sd6_pmx1: sd6@1 { - sd6_1 { - groups = "sd6_grp1"; - function = "sd6_m1"; - }; - }; - - sp0_ext_ldo_on_pmx: sp0_ext_ldo_on@0 { - sp0_ext_ldo_on { - groups = "sp0_ext_ldo_on_grp"; - function = "sp0_ext_ldo_on"; - }; - }; - - sp0_qspi_pmx: sp0_qspi@0 { - sp0_qspi { - groups = "sp0_qspi_grp"; - function = "sp0_qspi"; - }; - }; - - sp1_spi_pmx: sp1_spi@0 { - sp1_spi { - groups = "sp1_spi_grp"; - function = "sp1_spi"; - }; - }; - - tpiu_trace_pmx: tpiu_trace@0 { - tpiu_trace { - groups = "tpiu_trace_grp"; - function = "tpiu_trace"; - }; - }; - - uart0_pmx: uart0@0 { - uart0 { - groups = "uart0_grp"; - function = "uart0"; - }; - }; - - uart0_nopause_pmx: uart0_nopause@0 { - uart0_nopause { - groups = "uart0_nopause_grp"; - function = "uart0_nopause"; - }; - }; - - uart1_pmx: uart1@0 { - uart1 { - groups = "uart1_grp"; - function = "uart1"; - }; - }; - - uart2_pmx: uart2@0 { - uart2 { - groups = "uart2_grp"; - function = "uart2"; - }; - }; - - uart3_pmx0: uart3@0 { - uart3_0 { - groups = "uart3_grp0"; - function = "uart3_m0"; - }; - }; - - uart3_pmx1: uart3@1 { - uart3_1 { - groups = "uart3_grp1"; - function = "uart3_m1"; - }; - }; - - uart3_pmx2: uart3@2 { - uart3_2 { - groups = "uart3_grp2"; - function = "uart3_m2"; - }; - }; - - uart3_pmx3: uart3@3 { - uart3_3 { - groups = "uart3_grp3"; - function = "uart3_m3"; - }; - }; - - uart3_nopause_pmx0: uart3_nopause@0 { - uart3_nopause_0 { - groups = "uart3_nopause_grp0"; - function = "uart3_nopause_m0"; - }; - }; - - uart3_nopause_pmx1: uart3_nopause@1 { - uart3_nopause_1 { - groups = "uart3_nopause_grp1"; - function = "uart3_nopause_m1"; - }; - }; - - uart4_pmx0: uart4@0 { - uart4_0 { - groups = "uart4_grp0"; - function = "uart4_m0"; - }; - }; - - uart4_pmx1: uart4@1 { - uart4_1 { - groups = "uart4_grp1"; - function = "uart4_m1"; - }; - }; - - uart4_pmx2: uart4@2 { - uart4_2 { - groups = "uart4_grp2"; - function = "uart4_m2"; - }; - }; - - uart4_nopause_pmx: uart4_nopause@0 { - uart4_nopause { - groups = "uart4_nopause_grp"; - function = "uart4_nopause"; - }; - }; - - usb0_drvvbus_pmx: usb0_drvvbus@0 { - usb0_drvvbus { - groups = "usb0_drvvbus_grp"; - function = "usb0_drvvbus"; - }; - }; - - usb1_drvvbus_pmx: usb1_drvvbus@0 { - usb1_drvvbus { - groups = "usb1_drvvbus_grp"; - function = "usb1_drvvbus"; - }; - }; - - visbus_dout_pmx: visbus_dout@0 { - visbus_dout { - groups = "visbus_dout_grp"; - function = "visbus_dout"; - }; - }; - - vi_vip1_pmx: vi_vip1@0 { - vi_vip1 { - groups = "vi_vip1_grp"; - function = "vi_vip1"; - }; - }; - - vi_vip1_ext_pmx: vi_vip1_ext@0 { - vi_vip1_ext { - groups = "vi_vip1_ext_grp"; - function = "vi_vip1_ext"; - }; - }; - - vi_vip1_low8bit_pmx: vi_vip1_low8bit@0 { - vi_vip1_low8bit { - groups = "vi_vip1_low8bit_grp"; - function = "vi_vip1_low8bit"; - }; - }; - - vi_vip1_high8bit_pmx: vi_vip1_high8bit@0 { - vi_vip1_high8bit { - groups = "vi_vip1_high8bit_grp"; - function = "vi_vip1_high8bit"; - }; - }; - }; - - pmipc { - compatible = "arteris, flexnoc", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x13240000 0x13240000 0x00010000>; - pmipc@0x13240000 { - compatible = "sirf,atlas7-pmipc"; - reg = <0x13240000 0x00010000>; - }; - }; - - dramfw { - compatible = "arteris, flexnoc", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x10830000 0x10830000 0x18000>; - dramfw@10820000 { - compatible = "sirf,nocfw-dramfw"; - reg = <0x10830000 0x18000>; - }; - }; - - spramfw { - compatible = "arteris, flexnoc", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x10250000 0x10250000 0x3000>; - spramfw@10820000 { - compatible = "sirf,nocfw-spramfw"; - reg = <0x10250000 0x3000>; - }; - }; - - cpum { - compatible = "arteris, flexnoc", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x10200000 0x10200000 0x3000>; - cpum@10200000 { - compatible = "sirf,nocfw-cpum"; - reg = <0x10200000 0x3000>; - }; - }; - - cgum { - compatible = "arteris, flexnoc", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x18641000 0x18641000 0x3000>, - <0x18620000 0x18620000 0x1000>, - <0x18630000 0x18630000 0x10000>; - - cgum@18641000 { - compatible = "sirf,nocfw-cgum"; - reg = <0x18641000 0x3000>; - }; - - car: clock-controller@18620000 { - compatible = "sirf,atlas7-car"; - reg = <0x18620000 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - pwm: pwm@18630000 { - compatible = "sirf,prima2-pwm"; - #pwm-cells = <2>; - reg = <0x18630000 0x10000>; - clocks = <&car 138>, <&car 139>, <&car 237>, - <&car 240>, <&car 140>, <&car 246>; - clock-names = "pwmc", "sigsrc0", "sigsrc1", - "sigsrc2", "sigsrc3", "sigsrc4"; - }; - }; - - gnssm { - compatible = "arteris, flexnoc", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x18000000 0x18000000 0x0000ffff>, - <0x18010000 0x18010000 0x1000>, - <0x18020000 0x18020000 0x1000>, - <0x18030000 0x18030000 0x1000>, - <0x18040000 0x18040000 0x1000>, - <0x18050000 0x18050000 0x1000>, - <0x18060000 0x18060000 0x1000>, - <0x180b0000 0x180b0000 0x4000>, - <0x18100000 0x18100000 0x3000>, - <0x18250000 0x18250000 0x10000>, - <0x18200000 0x18200000 0x1000>; - - dmac0: dma-controller@18000000 { - cell-index = <0>; - compatible = "sirf,atlas7-dmac"; - reg = <0x18000000 0x1000>; - interrupts = <0 12 0>; - clocks = <&car 89>; - dma-channels = <16>; - #dma-cells = <1>; - }; - - gnssmfw@0x18100000 { - compatible = "sirf,nocfw-gnssm"; - reg = <0x18100000 0x3000>; - }; - - uart0: uart@18010000 { - cell-index = <0>; - compatible = "sirf,atlas7-uart"; - reg = <0x18010000 0x1000>; - interrupts = <0 17 0>; - clocks = <&car 90>; - fifosize = <128>; - dmas = <&dmac0 3>, <&dmac0 2>; - dma-names = "rx", "tx"; - }; - - uart1: uart@18020000 { - cell-index = <1>; - compatible = "sirf,atlas7-uart"; - reg = <0x18020000 0x1000>; - interrupts = <0 18 0>; - clocks = <&car 88>; - fifosize = <32>; - }; - - uart2: uart@18030000 { - cell-index = <2>; - compatible = "sirf,atlas7-uart"; - reg = <0x18030000 0x1000>; - interrupts = <0 19 0>; - clocks = <&car 91>; - fifosize = <128>; - dmas = <&dmac0 6>, <&dmac0 7>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - uart3: uart@18040000 { - cell-index = <3>; - compatible = "sirf,atlas7-uart"; - reg = <0x18040000 0x1000>; - interrupts = <0 66 0>; - clocks = <&car 92>; - fifosize = <128>; - dmas = <&dmac0 4>, <&dmac0 5>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - uart4: uart@18050000 { - cell-index = <4>; - compatible = "sirf,atlas7-uart"; - reg = <0x18050000 0x1000>; - interrupts = <0 69 0>; - clocks = <&car 93>; - fifosize = <128>; - dmas = <&dmac0 0>, <&dmac0 1>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - uart5: uart@18060000 { - cell-index = <5>; - compatible = "sirf,atlas7-uart"; - reg = <0x18060000 0x1000>; - interrupts = <0 71 0>; - clocks = <&car 94>; - fifosize = <128>; - dmas = <&dmac0 8>, <&dmac0 9>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - gmac: eth@180b0000 { - compatible = "snps, dwc-eth-qos"; - reg = <0x180b0000 0x4000>; - interrupts = <0 59 0>, <0 70 0>; - interrupt-names = "macirq", "macpmt"; - clocks = <&car 39>, <&car 45>, - <&car 86>, <&car 87>; - clock-names = "gnssm_rgmii", "gnssm_gmac", - "rgmii", "gmac"; - local-mac-address = [00 00 00 00 00 00]; - phy-mode = "rgmii"; - }; - dspub@18250000 { - compatible = "dx,cc44p"; - reg = <0x18250000 0x10000>; - interrupts = <0 27 0>; - }; - - spi1: spi@18200000 { - compatible = "sirf,prima2-spi"; - reg = <0x18200000 0x1000>; - interrupts = <0 16 0>; - clocks = <&car 95>; - #address-cells = <1>; - #size-cells = <0>; - dmas = <&dmac0 12>, <&dmac0 13>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - }; - - - gpum { - compatible = "arteris, flexnoc", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x13000000 0x13000000 0x3000>, - <0x13010000 0x13010000 0x1400>, - <0x13010800 0x13010800 0x100>, - <0x13011000 0x13011000 0x100>; - gpum@0x13000000 { - compatible = "sirf,nocfw-gpum"; - reg = <0x13000000 0x3000>; - }; - dmacsdrr: dma-controller@13010800 { - cell-index = <5>; - compatible = "sirf,atlas7-dmac-v2"; - reg = <0x13010800 0x100>; - interrupts = <0 8 0>; - clocks = <&car 127>; - #dma-cells = <1>; - #dma-channels = <1>; - }; - dmacsdrw: dma-controller@13011000 { - cell-index = <6>; - compatible = "sirf,atlas7-dmac-v2"; - reg = <0x13011000 0x100>; - interrupts = <0 9 0>; - clocks = <&car 127>; - #dma-cells = <1>; - #dma-channels = <1>; - }; - sdr@0x13010000 { - compatible = "sirf,atlas7-sdr"; - reg = <0x13010000 0x1400>; - interrupts = <0 7 0>, - <0 8 0>, - <0 9 0>; - clocks = <&car 127>; - dmas = <&dmacsdrr 0>, <&dmacsdrw 0>; - dma-names = "tx", "rx"; - }; - }; - - mediam { - compatible = "arteris, flexnoc", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x15000000 0x15000000 0x00600000>, - <0x16000000 0x16000000 0x00200000>, - <0x17000000 0x17000000 0x10000>, - <0x17020000 0x17020000 0x1000>, - <0x17030000 0x17030000 0x1000>, - <0x17040000 0x17040000 0x1000>, - <0x17050000 0x17050000 0x10000>, - <0x17060000 0x17060000 0x200>, - <0x17060200 0x17060200 0x100>, - <0x17070000 0x17070000 0x200>, - <0x17070200 0x17070200 0x100>, - <0x170A0000 0x170A0000 0x3000>; - - multimedia@15000000 { - compatible = "sirf,atlas7-video-codec"; - reg = <0x15000000 0x10000>; - interrupts = <0 5 0>; - clocks = <&car 102>; - }; - - mediam@170A0000 { - compatible = "sirf,nocfw-mediam"; - reg = <0x170A0000 0x3000>; - }; - - gpio_0: gpio_mediam@17040000 { - #gpio-cells = <2>; - #interrupt-cells = <2>; - compatible = "sirf,atlas7-gpio"; - reg = <0x17040000 0x1000>; - interrupts = <0 13 0>, <0 14 0>; - clocks = <&car 107>; - clock-names = "gpio0_io"; - gpio-controller; - interrupt-controller; - - gpio-banks = <2>; - gpio-ranges = <&pinctrl 0 0 0>, - <&pinctrl 32 0 0>; - gpio-ranges-group-names = "lvds_gpio_grp", - "uart_nand_gpio_grp"; - }; - - nand@17050000 { - compatible = "sirf,atlas7-nand"; - reg = <0x17050000 0x10000>; - pinctrl-names = "default"; - pinctrl-0 = <&nd_df_pmx>; - interrupts = <0 41 0>; - clocks = <&car 108>, <&car 112>; - clock-names = "nand_io", "nand_nand"; - }; - - sd0: sdhci@16000000 { - cell-index = <0>; - compatible = "sirf,atlas7-sdhc"; - reg = <0x16000000 0x100000>; - interrupts = <0 38 0>; - clocks = <&car 109>, <&car 111>; - clock-names = "core", "iface"; - wp-inverted; - non-removable; - status = "disabled"; - bus-width = <8>; - }; - - sd1: sdhci@16100000 { - cell-index = <1>; - compatible = "sirf,atlas7-sdhc"; - reg = <0x16100000 0x100000>; - interrupts = <0 38 0>; - clocks = <&car 109>, <&car 111>; - clock-names = "core", "iface"; - non-removable; - status = "disabled"; - bus-width = <8>; - }; - - jpeg@17000000 { - compatible = "sirf,atlas7-jpeg"; - reg = <0x17000000 0x10000>; - interrupts = <0 72 0>, - <0 73 0>; - clocks = <&car 103>; - }; - - usb0: usb@17060000 { - cell-index = <0>; - compatible = "sirf,atlas7-usb"; - reg = <0x17060000 0x200>; - interrupts = <0 10 0>; - clocks = <&car 113>; - sirf,usbphy = <&usbphy0>; - phy_type = "utmi"; - dr_mode = "otg"; - maximum-speed = "high-speed"; - status = "okay"; - }; - - usb1: usb@17070000 { - cell-index = <1>; - compatible = "sirf,atlas7-usb"; - reg = <0x17070000 0x200>; - interrupts = <0 11 0>; - clocks = <&car 114>; - sirf,usbphy = <&usbphy1>; - phy_type = "utmi"; - dr_mode = "host"; - maximum-speed = "high-speed"; - status = "okay"; - }; - - usbphy0: usbphy@0 { - compatible = "sirf,atlas7-usbphy"; - reg = <0x17060200 0x100>; - clocks = <&car 115>; - status = "okay"; - }; - - usbphy1: usbphy@1 { - compatible = "sirf,atlas7-usbphy"; - reg = <0x17070200 0x100>; - clocks = <&car 116>; - status = "okay"; - }; - - i2c0: i2c@17020000 { - cell-index = <0>; - compatible = "sirf,prima2-i2c"; - reg = <0x17020000 0x1000>; - interrupts = <0 24 0>; - clocks = <&car 105>; - #address-cells = <1>; - #size-cells = <0>; - }; - - }; - - vdifm { - compatible = "arteris, flexnoc", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x13290000 0x13290000 0x3000>, - <0x13300000 0x13300000 0x1000>, - <0x14200000 0x14200000 0x600000>; - - vdifm@13290000 { - compatible = "sirf,nocfw-vdifm"; - reg = <0x13290000 0x3000>; - }; - - gpio_1: gpio_vdifm@13300000 { - #gpio-cells = <2>; - #interrupt-cells = <2>; - compatible = "sirf,atlas7-gpio"; - reg = <0x13300000 0x1000>; - interrupts = <0 43 0>, <0 44 0>, - <0 45 0>, <0 46 0>; - clocks = <&car 84>; - clock-names = "gpio1_io"; - gpio-controller; - interrupt-controller; - - gpio-banks = <4>; - gpio-ranges = <&pinctrl 0 0 0>, - <&pinctrl 32 0 0>, - <&pinctrl 64 0 0>, - <&pinctrl 96 0 0>; - gpio-ranges-group-names = "gnss_gpio_grp", - "lcd_vip_gpio_grp", - "sdio_i2s_gpio_grp", - "sp_rgmii_gpio_grp"; - }; - - sd2: sdhci@14200000 { - cell-index = <2>; - compatible = "sirf,atlas7-sdhc"; - reg = <0x14200000 0x100000>; - interrupts = <0 23 0>; - clocks = <&car 70>, <&car 75>; - clock-names = "core", "iface"; - status = "disabled"; - bus-width = <4>; - sd-uhs-sdr50; - vqmmc-supply = <&vqmmc>; - vqmmc: vqmmc@2 { - regulator-min-microvolt = <1650000>; - regulator-max-microvolt = <1950000>; - regulator-name = "vqmmc-ldo"; - regulator-type = "voltage"; - regulator-boot-on; - regulator-allow-bypass; - }; - }; - - sd3: sdhci@14300000 { - cell-index = <3>; - compatible = "sirf,atlas7-sdhc"; - reg = <0x14300000 0x100000>; - interrupts = <0 23 0>; - clocks = <&car 76>, <&car 81>; - clock-names = "core", "iface"; - status = "disabled"; - bus-width = <4>; - }; - - sd5: sdhci@14500000 { - cell-index = <5>; - compatible = "sirf,atlas7-sdhc"; - reg = <0x14500000 0x100000>; - interrupts = <0 39 0>; - clocks = <&car 71>, <&car 76>; - clock-names = "core", "iface"; - status = "disabled"; - bus-width = <4>; - loop-dma; - }; - - sd6: sdhci@14600000 { - cell-index = <6>; - compatible = "sirf,atlas7-sdhc"; - reg = <0x14600000 0x100000>; - interrupts = <0 98 0>; - clocks = <&car 72>, <&car 77>; - clock-names = "core", "iface"; - status = "disabled"; - bus-width = <4>; - }; - - sd7: sdhci@14700000 { - cell-index = <7>; - compatible = "sirf,atlas7-sdhc"; - reg = <0x14700000 0x100000>; - interrupts = <0 98 0>; - clocks = <&car 72>, <&car 77>; - clock-names = "core", "iface"; - status = "disabled"; - bus-width = <4>; - }; - }; - - audiom { - compatible = "arteris, flexnoc", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x10d50000 0x10d50000 0x0000ffff>, - <0x10d60000 0x10d60000 0x0000ffff>, - <0x10d80000 0x10d80000 0x0000ffff>, - <0x10d90000 0x10d90000 0x0000ffff>, - <0x10ED0000 0x10ED0000 0x3000>, - <0x10dc8000 0x10dc8000 0x1000>, - <0x10dc0000 0x10dc0000 0x1000>, - <0x10db0000 0x10db0000 0x4000>, - <0x10d40000 0x10d40000 0x1000>, - <0x10d30000 0x10d30000 0x1000>; - - timer@10dc0000 { - compatible = "sirf,atlas7-tick"; - reg = <0x10dc0000 0x1000>; - interrupts = <0 0 0>, - <0 1 0>, - <0 2 0>, - <0 49 0>, - <0 50 0>, - <0 51 0>; - clocks = <&car 47>; - }; - - timerb@10dc8000 { - compatible = "sirf,atlas7-tick"; - reg = <0x10dc8000 0x1000>; - interrupts = <0 74 0>, - <0 75 0>, - <0 76 0>, - <0 77 0>, - <0 78 0>, - <0 79 0>; - clocks = <&car 47>; - }; - - vip0@10db0000 { - compatible = "sirf,atlas7-vip0"; - reg = <0x10db0000 0x2000>; - interrupts = <0 85 0>; - sirf,vip_cma_size = <0xC00000>; - }; - - cvd@10db2000 { - compatible = "sirf,cvd"; - reg = <0x10db2000 0x2000>; - clocks = <&car 46>; - }; - - dmac2: dma-controller@10d50000 { - cell-index = <2>; - compatible = "sirf,atlas7-dmac"; - reg = <0x10d50000 0xffff>; - interrupts = <0 55 0>; - clocks = <&car 60>; - dma-channels = <16>; - #dma-cells = <1>; - }; - - dmac3: dma-controller@10d60000 { - cell-index = <3>; - compatible = "sirf,atlas7-dmac"; - reg = <0x10d60000 0xffff>; - interrupts = <0 56 0>; - clocks = <&car 61>; - dma-channels = <16>; - #dma-cells = <1>; - }; - - adc: adc@10d80000 { - compatible = "sirf,atlas7-adc"; - reg = <0x10d80000 0xffff>; - interrupts = <0 34 0>; - clocks = <&car 49>; - #io-channel-cells = <1>; - }; - - pulsec@10d90000 { - compatible = "sirf,prima2-pulsec"; - reg = <0x10d90000 0xffff>; - interrupts = <0 42 0>; - clocks = <&car 54>; - }; - - audiom@10ED0000 { - compatible = "sirf,nocfw-audiom"; - reg = <0x10ED0000 0x3000>; - interrupts = <0 102 0>; - }; - - usp1: usp@10d30000 { - cell-index = <1>; - reg = <0x10d30000 0x1000>; - fifosize = <512>; - clocks = <&car 58>; - dmas = <&dmac2 6>, <&dmac2 7>; - dma-names = "rx", "tx"; - }; - - usp2: usp@10d40000 { - cell-index = <2>; - reg = <0x10d40000 0x1000>; - interrupts = <0 22 0>; - clocks = <&car 59>; - dmas = <&dmac2 12>, <&dmac2 13>; - dma-names = "rx", "tx"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - }; - - ddrm { - compatible = "arteris, flexnoc", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x10820000 0x10820000 0x3000>, - <0x10800000 0x10800000 0x2000>; - ddrm@10820000 { - compatible = "sirf,nocfw-ddrm"; - reg = <0x10820000 0x3000>; - interrupts = <0 105 0>; - }; - - memory-controller@0x10800000 { - compatible = "sirf,atlas7-memc"; - reg = <0x10800000 0x2000>; - }; - - }; - - btm { - compatible = "arteris, flexnoc", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x11002000 0x11002000 0x0000ffff>, - <0x11010000 0x11010000 0x3000>, - <0x11000000 0x11000000 0x1000>, - <0x11001000 0x11001000 0x1000>; - - dmac4: dma-controller@11002000 { - cell-index = <4>; - compatible = "sirf,atlas7-dmac"; - reg = <0x11002000 0x1000>; - interrupts = <0 99 0>; - clocks = <&car 130>; - dma-channels = <16>; - #dma-cells = <1>; - }; - uart6: uart@11000000 { - cell-index = <6>; - compatible = "sirf,atlas7-bt-uart", - "sirf,atlas7-uart"; - reg = <0x11000000 0x1000>; - interrupts = <0 100 0>; - clocks = <&car 131>, <&car 133>, <&car 134>; - clock-names = "uart", "general", "noc"; - fifosize = <128>; - dmas = <&dmac4 12>, <&dmac4 13>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - usp3: usp@11001000 { - compatible = "sirf,atlas7-bt-usp", - "sirf,prima2-usp-pcm"; - cell-index = <3>; - reg = <0x11001000 0x1000>; - fifosize = <512>; - clocks = <&car 132>, <&car 129>, <&car 133>, - <&car 134>, <&car 135>; - clock-names = "usp3_io", "a7ca_btss", "a7ca_io", - "noc_btm_io", "thbtm_io"; - dmas = <&dmac4 0>, <&dmac4 1>; - dma-names = "rx", "tx"; - }; - - btm@11010000 { - compatible = "sirf,nocfw-btm"; - reg = <0x11010000 0x3000>; - }; - }; - - rtcm { - compatible = "arteris, flexnoc", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x18810000 0x18810000 0x3000>, - <0x18840000 0x18840000 0x1000>, - <0x18890000 0x18890000 0x1000>, - <0x188B0000 0x188B0000 0x10000>, - <0x188D0000 0x188D0000 0x1000>; - rtcm@18810000 { - compatible = "sirf,nocfw-rtcm"; - reg = <0x18810000 0x3000>; - interrupts = <0 109 0>; - }; - - gpio_2: gpio_rtcm@18890000 { - #gpio-cells = <2>; - #interrupt-cells = <2>; - compatible = "sirf,atlas7-gpio"; - reg = <0x18890000 0x1000>; - interrupts = <0 47 0>; - gpio-controller; - interrupt-controller; - - gpio-banks = <1>; - gpio-ranges = <&pinctrl 0 0 0>; - gpio-ranges-group-names = "rtc_gpio_grp"; - }; - - rtc-iobg@18840000 { - compatible = "sirf,prima2-rtciobg", - "sirf-prima2-rtciobg-bus", - "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x18840000 0x1000>; - - sysrtc@2000 { - compatible = "sirf,prima2-sysrtc"; - reg = <0x2000 0x100>; - interrupts = <0 52 0>; - }; - pwrc@3000 { - compatible = "sirf,atlas7-pwrc"; - reg = <0x3000 0x100>; - }; - }; - - qspi: flash@188B0000 { - cell-index = <0>; - compatible = "sirf,atlas7-qspi-nor"; - reg = <0x188B0000 0x10000>; - interrupts = <0 15 0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - retain@0x188D0000 { - compatible = "sirf,atlas7-retain"; - reg = <0x188D0000 0x1000>; - }; - - }; - disp-iobg { - /* lcdc0 */ - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x13100000 0x13100000 0x20000>, - <0x10e10000 0x10e10000 0x10000>, - <0x17010000 0x17010000 0x10000>; - - lcd@13100000 { - compatible = "sirf,atlas7-lcdc"; - reg = <0x13100000 0x10000>; - interrupts = <0 30 0>; - clocks = <&car 79>; - }; - vpp@13110000 { - compatible = "sirf,atlas7-vpp"; - reg = <0x13110000 0x10000>; - interrupts = <0 31 0>; - clocks = <&car 78>; - resets = <&car 29>; - }; - lvds@10e10000 { - compatible = "sirf,atlas7-lvdsc"; - reg = <0x10e10000 0x10000>; - interrupts = <0 64 0>; - clocks = <&car 54>; - resets = <&car 29>; - }; - g2d@17010000 { - compatible = "sirf, atlas7-g2d"; - reg = <0x17010000 0x10000>; - interrupts = <0 61 0>; - clocks = <&car 104>; - }; - - }; - - graphics-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x12000000 0x12000000 0x1000000>; - - graphics@12000000 { - compatible = "powervr,sgx531"; - reg = <0x12000000 0x1000000>; - interrupts = <0 6 0>; - clocks = <&car 126>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi index 58ec1b2f8ef6..cc58f2b926b9 100644 --- a/arch/arm/boot/dts/bcm21664.dtsi +++ b/arch/arm/boot/dts/bcm21664.dtsi @@ -27,7 +27,7 @@ bootargs = "console=ttyS0,115200n8"; }; - cpus { + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts index 403bacf986eb..3b4ab947492a 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -25,6 +25,7 @@ emmc2bus = &emmc2bus; ethernet0 = &genet; pcie0 = &pcie0; + blconfig = &blconfig; }; leds { @@ -218,6 +219,22 @@ status = "okay"; }; +&rmem { + /* + * RPi4's co-processor will copy the board's bootloader configuration + * into memory for the OS to consume. It'll also update this node with + * its placement information. + */ + blconfig: nvram@0 { + compatible = "raspberrypi,bootloader-config", "nvmem-rmem"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0 0x0 0x0>; + no-map; + status = "disabled"; + }; +}; + /* SDHCI is used to control the SDIO for wireless */ &sdhci { #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi index 4847dd305317..462b1dfb0385 100644 --- a/arch/arm/boot/dts/bcm2711.dtsi +++ b/arch/arm/boot/dts/bcm2711.dtsi @@ -308,6 +308,22 @@ #reset-cells = <1>; }; + bsc_intr: interrupt-controller@7ef00040 { + compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc"; + reg = <0x7ef00040 0x30>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + aon_intr: interrupt-controller@7ef00100 { + compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc"; + reg = <0x7ef00100 0x30>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + }; + hdmi0: hdmi@7ef00700 { compatible = "brcm,bcm2711-hdmi0"; reg = <0x7ef00700 0x300>, @@ -330,6 +346,11 @@ "hd"; clock-names = "hdmi", "bvb", "audio", "cec"; resets = <&dvp 0>; + interrupt-parent = <&aon_intr>; + interrupts = <0>, <1>, <2>, + <3>, <4>, <5>; + interrupt-names = "cec-tx", "cec-rx", "cec-low", + "wakeup", "hpd-connected", "hpd-removed"; ddc = <&ddc0>; dmas = <&dma 10>; dma-names = "audio-rx"; @@ -341,6 +362,8 @@ reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>; reg-names = "bsc", "auto-i2c"; clock-frequency = <97500>; + interrupt-parent = <&bsc_intr>; + interrupts = <0>; status = "disabled"; }; @@ -367,6 +390,11 @@ ddc = <&ddc1>; clock-names = "hdmi", "bvb", "audio", "cec"; resets = <&dvp 1>; + interrupt-parent = <&aon_intr>; + interrupts = <8>, <7>, <6>, + <9>, <10>, <11>; + interrupt-names = "cec-tx", "cec-rx", "cec-low", + "wakeup", "hpd-connected", "hpd-removed"; dmas = <&dma 17>; dma-names = "audio-rx"; status = "disabled"; @@ -377,6 +405,8 @@ reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>; reg-names = "bsc", "auto-i2c"; clock-frequency = <97500>; + interrupt-parent = <&bsc_intr>; + interrupts = <1>; status = "disabled"; }; }; @@ -540,6 +570,7 @@ &dsi1 { interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + compatible = "brcm,bcm2711-dsi1"; }; &gpio { diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi index 6194857f8a02..1114c592e461 100644 --- a/arch/arm/boot/dts/berlin2.dtsi +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -191,7 +191,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <8>; + ngpios = <8>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -209,7 +209,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <8>; + ngpios = <8>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -227,7 +227,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <8>; + ngpios = <8>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -245,7 +245,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <8>; + ngpios = <8>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -446,7 +446,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <8>; + ngpios = <8>; reg = <0>; }; }; @@ -461,7 +461,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <8>; + ngpios = <8>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts index 56fa951bc86f..c1d91424e658 100644 --- a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts +++ b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts @@ -34,19 +34,19 @@ linux,usable-memory = <0x00000000 0x20000000>; /* 512 MB */ }; - leds { + led-controller { compatible = "pwm-leds"; pinctrl-0 = <&ledpwm_pmux>; pinctrl-names = "default"; - white { + led-1 { label = "white"; pwms = <&pwm 0 600000 0>; max-brightness = <255>; linux,default-trigger = "default-on"; }; - red { + led-2 { label = "red"; pwms = <&pwm 1 600000 0>; max-brightness = <255>; diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi index 6f30d7eb3b41..b2768f7a3185 100644 --- a/arch/arm/boot/dts/berlin2cd.dtsi +++ b/arch/arm/boot/dts/berlin2cd.dtsi @@ -181,7 +181,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <8>; + ngpios = <8>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -199,7 +199,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <8>; + ngpios = <8>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -217,7 +217,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <8>; + ngpios = <8>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -235,7 +235,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <8>; + ngpios = <8>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -473,7 +473,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <8>; + ngpios = <8>; reg = <0>; }; }; @@ -518,7 +518,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <8>; + ngpios = <8>; reg = <0>; }; }; diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index b6a0acac6836..598a46f96a82 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -252,7 +252,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -270,7 +270,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -288,7 +288,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -306,7 +306,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -552,7 +552,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; }; }; @@ -613,7 +613,7 @@ compatible = "snps,dw-apb-gpio-port"; gpio-controller; #gpio-cells = <2>; - snps,nr-gpios = <32>; + ngpios = <32>; reg = <0>; }; }; diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts index cad58f733bd6..6d2cca6b4488 100644 --- a/arch/arm/boot/dts/dra71-evm.dts +++ b/arch/arm/boot/dts/dra71-evm.dts @@ -112,6 +112,8 @@ regulator-name = "lp8733-ldo0"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; }; lp8733_ldo1_reg: ldo1 { diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi index 2f326151116b..a09e7bd77fc7 100644 --- a/arch/arm/boot/dts/dra76x.dtsi +++ b/arch/arm/boot/dts/dra76x.dtsi @@ -9,6 +9,13 @@ compatible = "ti,dra762", "ti,dra7"; ocp { + emif1: emif@4c000000 { + compatible = "ti,emif-dra7xx"; + reg = <0x4c000000 0x200>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + target-module@42c01900 { compatible = "ti,sysc-dra7-mcan", "ti,sysc"; ranges = <0x0 0x42c00000 0x2000>; @@ -133,3 +140,32 @@ /* dra76x is not affected by i887 */ max-frequency = <96000000>; }; + +&cpu0_opp_table { + opp_plus@1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1250000 950000 1250000>, + <1250000 950000 1250000>; + opp-supported-hw = <0xFF 0x08>; + }; +}; + +&opp_supply_mpu { + ti,efuse-settings = < + /* uV offset */ + 1060000 0x0 + 1160000 0x4 + 1210000 0x8 + 1250000 0xC + >; +}; + +&abb_mpu { + ti,abb_info = < + /*uV ABB efuse rbb_m fbb_m vset_m*/ + 1060000 0 0x0 0 0x02000000 0x01F00000 + 1160000 0 0x4 0 0x02000000 0x01F00000 + 1210000 0 0x8 0 0x02000000 0x01F00000 + 1250000 0 0xC 0 0x02000000 0x01F00000 + >; +}; diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi index 3af1ab4458ef..cfb239d5186a 100644 --- a/arch/arm/boot/dts/e60k02.dtsi +++ b/arch/arm/boot/dts/e60k02.dtsi @@ -278,6 +278,12 @@ }; &uart1 { + /* J4, through-hole */ + status = "okay"; +}; + +&uart4 { + /* TP198, next to J4, SMD pads */ status = "okay"; }; diff --git a/arch/arm/boot/dts/efm32gg-dk3750.dts b/arch/arm/boot/dts/efm32gg-dk3750.dts deleted file mode 100644 index adfa559a488b..000000000000 --- a/arch/arm/boot/dts/efm32gg-dk3750.dts +++ /dev/null @@ -1,88 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device tree for EFM32GG-DK3750 development board. - * - * Documentation available from - * http://www.silabs.com/Support%20Documents/TechnicalDocs/efm32gg-dk3750-ug.pdf - */ - -/dts-v1/; -#include "efm32gg.dtsi" - -/ { - model = "Energy Micro Giant Gecko Development Kit"; - compatible = "efm32,dk3750"; - - chosen { - bootargs = "console=ttyefm4,115200 init=/linuxrc ignore_loglevel ihash_entries=64 dhash_entries=64 earlyprintk uclinux.physaddr=0x8c400000 root=/dev/mtdblock0"; - }; - - memory@88000000 { - device_type = "memory"; - reg = <0x88000000 0x400000>; - }; - - soc { - adc@40002000 { - status = "ok"; - }; - - i2c@4000a000 { - energymicro,location = <3>; - status = "ok"; - - temp@48 { - compatible = "st,stds75"; - reg = <0x48>; - }; - - eeprom@50 { - compatible = "microchip,24c02", "atmel,24c02"; - reg = <0x50>; - pagesize = <16>; - }; - }; - - spi0: spi@4000c000 { /* USART0 */ - cs-gpios = <&gpio 68 1>; // E4 - energymicro,location = <1>; - status = "ok"; - - microsd@0 { - compatible = "mmc-spi-slot"; - spi-max-frequency = <100000>; - voltage-ranges = <3200 3400>; - broken-cd; - reg = <0>; - }; - }; - - spi1: spi@4000c400 { /* USART1 */ - cs-gpios = <&gpio 51 1>; // D3 - energymicro,location = <1>; - status = "ok"; - - ks8851@0 { - compatible = "ks8851"; - spi-max-frequency = <6000000>; - reg = <0>; - interrupt-parent = <&boardfpga>; - interrupts = <4>; - }; - }; - - uart4: uart@4000e400 { /* UART1 */ - energymicro,location = <2>; - status = "ok"; - }; - - boardfpga: boardfpga@80000000 { - compatible = "efm32board"; - reg = <0x80000000 0x400>; - irq-gpios = <&gpio 64 1>; - interrupt-controller; - #interrupt-cells = <1>; - status = "ok"; - }; - }; -}; diff --git a/arch/arm/boot/dts/efm32gg.dtsi b/arch/arm/boot/dts/efm32gg.dtsi deleted file mode 100644 index 8a58e49144cc..000000000000 --- a/arch/arm/boot/dts/efm32gg.dtsi +++ /dev/null @@ -1,177 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device tree for Energy Micro EFM32 Giant Gecko SoC. - * - * Documentation available from - * http://www.silabs.com/Support%20Documents/TechnicalDocs/EFM32GG-RM.pdf - */ - -#include "armv7-m.dtsi" -#include "dt-bindings/clock/efm32-cmu.h" - -/ { - #address-cells = <1>; - #size-cells = <1>; - - aliases { - i2c0 = &i2c0; - i2c1 = &i2c1; - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; - serial3 = &uart3; - serial4 = &uart4; - spi0 = &spi0; - spi1 = &spi1; - spi2 = &spi2; - }; - - soc { - adc: adc@40002000 { - compatible = "energymicro,efm32-adc"; - reg = <0x40002000 0x400>; - interrupts = <7>; - clocks = <&cmu clk_HFPERCLKADC0>; - status = "disabled"; - }; - - gpio: gpio@40006000 { - compatible = "energymicro,efm32-gpio"; - reg = <0x40006000 0x1000>; - interrupts = <1 11>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <1>; - clocks = <&cmu clk_HFPERCLKGPIO>; - status = "ok"; - }; - - i2c0: i2c@4000a000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "energymicro,efm32-i2c"; - reg = <0x4000a000 0x400>; - interrupts = <9>; - clocks = <&cmu clk_HFPERCLKI2C0>; - clock-frequency = <100000>; - status = "disabled"; - }; - - i2c1: i2c@4000a400 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "energymicro,efm32-i2c"; - reg = <0x4000a400 0x400>; - interrupts = <10>; - clocks = <&cmu clk_HFPERCLKI2C1>; - clock-frequency = <100000>; - status = "disabled"; - }; - - spi0: spi@4000c000 { /* USART0 */ - #address-cells = <1>; - #size-cells = <0>; - compatible = "energymicro,efm32-spi"; - reg = <0x4000c000 0x400>; - interrupts = <3 4>; - clocks = <&cmu clk_HFPERCLKUSART0>; - status = "disabled"; - }; - - spi1: spi@4000c400 { /* USART1 */ - #address-cells = <1>; - #size-cells = <0>; - compatible = "energymicro,efm32-spi"; - reg = <0x4000c400 0x400>; - interrupts = <15 16>; - clocks = <&cmu clk_HFPERCLKUSART1>; - status = "disabled"; - }; - - spi2: spi@4000c800 { /* USART2 */ - #address-cells = <1>; - #size-cells = <0>; - compatible = "energymicro,efm32-spi"; - reg = <0x4000c800 0x400>; - interrupts = <18 19>; - clocks = <&cmu clk_HFPERCLKUSART2>; - status = "disabled"; - }; - - uart0: uart@4000c000 { /* USART0 */ - compatible = "energymicro,efm32-uart"; - reg = <0x4000c000 0x400>; - interrupts = <3 4>; - clocks = <&cmu clk_HFPERCLKUSART0>; - status = "disabled"; - }; - - uart1: uart@4000c400 { /* USART1 */ - compatible = "energymicro,efm32-uart"; - reg = <0x4000c400 0x400>; - interrupts = <15 16>; - clocks = <&cmu clk_HFPERCLKUSART1>; - status = "disabled"; - }; - - uart2: uart@4000c800 { /* USART2 */ - compatible = "energymicro,efm32-uart"; - reg = <0x4000c800 0x400>; - interrupts = <18 19>; - clocks = <&cmu clk_HFPERCLKUSART2>; - status = "disabled"; - }; - - uart3: uart@4000e000 { /* UART0 */ - compatible = "energymicro,efm32-uart"; - reg = <0x4000e000 0x400>; - interrupts = <20 21>; - clocks = <&cmu clk_HFPERCLKUART0>; - status = "disabled"; - }; - - uart4: uart@4000e400 { /* UART1 */ - compatible = "energymicro,efm32-uart"; - reg = <0x4000e400 0x400>; - interrupts = <22 23>; - clocks = <&cmu clk_HFPERCLKUART1>; - status = "disabled"; - }; - - timer0: timer@40010000 { - compatible = "energymicro,efm32-timer"; - reg = <0x40010000 0x400>; - interrupts = <2>; - clocks = <&cmu clk_HFPERCLKTIMER0>; - }; - - timer1: timer@40010400 { - compatible = "energymicro,efm32-timer"; - reg = <0x40010400 0x400>; - interrupts = <12>; - clocks = <&cmu clk_HFPERCLKTIMER1>; - }; - - timer2: timer@40010800 { - compatible = "energymicro,efm32-timer"; - reg = <0x40010800 0x400>; - interrupts = <13>; - clocks = <&cmu clk_HFPERCLKTIMER2>; - }; - - timer3: timer@40010c00 { - compatible = "energymicro,efm32-timer"; - reg = <0x40010c00 0x400>; - interrupts = <14>; - clocks = <&cmu clk_HFPERCLKTIMER3>; - }; - - cmu: cmu@400c8000 { - compatible = "efm32gg,cmu"; - reg = <0x400c8000 0x400>; - interrupts = <32>; - #clock-cells = <1>; - }; - }; -}; diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi index 04290ec4583a..829c05b2c405 100644 --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi @@ -79,7 +79,7 @@ pmic@66 { compatible = "samsung,s2mps14-pmic"; interrupt-parent = <&gpx3>; - interrupts = <5 IRQ_TYPE_NONE>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&s2mps14_irq>; reg = <0x66>; diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index 69451566945d..fae046e08a5d 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -200,7 +200,7 @@ pmic@66 { compatible = "samsung,s2mps14-pmic"; interrupt-parent = <&gpx0>; - interrupts = <7 IRQ_TYPE_NONE>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; reg = <0x66>; wakeup-source; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index a26e3e582a7e..d64ccf4b7d32 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -270,7 +270,7 @@ pmic@66 { compatible = "samsung,s2mps14-pmic"; interrupt-parent = <&gpx0>; - interrupts = <7 IRQ_TYPE_NONE>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; reg = <0x66>; wakeup-source; diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts index a0c3bab382ae..304a8ee2364c 100644 --- a/arch/arm/boot/dts/exynos4210-i9100.dts +++ b/arch/arm/boot/dts/exynos4210-i9100.dts @@ -560,27 +560,33 @@ regulator-boot-on; }; - charger_reg: CHARGER { - regulator-name = "CHARGER"; - regulator-min-microamp = <60000>; - regulator-max-microamp = <2580000>; + EN32KHZ_AP { + regulator-name = "EN32KHZ_AP"; regulator-always-on; }; - chargercv_reg: CHARGER_CV { - regulator-name = "CHARGER_CV"; - regulator-min-microvolt = <3800000>; - regulator-max-microvolt = <4100000>; + EN32KHZ_CP { + regulator-name = "EN32KHZ_CP"; regulator-always-on; }; - EN32KHZ_AP { - regulator-name = "EN32KHZ_AP"; + charger_reg: CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <200000>; + regulator-max-microamp = <950000>; + }; + + chargercv_reg: CHARGER_CV { + regulator-name = "CHARGER_CV"; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; regulator-always-on; }; - EN32KHZ_CP { - regulator-name = "EN32KHZ_CP"; + CHARGER_TOPOFF { + regulator-name = "CHARGER_TOPOFF"; + regulator-min-microamp = <200000>; + regulator-max-microamp = <200000>; regulator-always-on; }; }; diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index 9d2baea62d0d..fba1462b19df 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -109,7 +109,7 @@ compatible = "samsung,s5m8767-pmic"; reg = <0x66>; interrupt-parent = <&gpx3>; - interrupts = <2 IRQ_TYPE_NONE>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>; wakeup-source; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index bf457d0c02eb..1aad4859c5f1 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -349,7 +349,7 @@ reg = <0x66>; interrupt-parent = <&gpx3>; - interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&s2mps11_irq>; diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi index d0df560eb0db..6d690b1db099 100644 --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -509,7 +509,7 @@ samsung,s2mps11-acokb-ground; interrupt-parent = <&gpx0>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&s2mps11_irq>; diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi index fe9d34c23374..2ddb7a5f12b3 100644 --- a/arch/arm/boot/dts/exynos54xx.dtsi +++ b/arch/arm/boot/dts/exynos54xx.dtsi @@ -188,7 +188,7 @@ compatible = "samsung,exynos4210-ehci"; reg = <0x12110000 0x100>; interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usb2_phy 1>; + phys = <&usb2_phy 0>; phy-names = "host"; }; @@ -196,12 +196,12 @@ compatible = "samsung,exynos4210-ohci"; reg = <0x12120000 0x100>; interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usb2_phy 1>; + phys = <&usb2_phy 0>; phy-names = "host"; }; usb2_phy: phy@12130000 { - compatible = "samsung,exynos5250-usb2-phy"; + compatible = "samsung,exynos5420-usb2-phy"; reg = <0x12130000 0x100>; #phy-cells = <1>; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index bbe52150b165..84d0176d5193 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -948,6 +948,16 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; + usb1_pins_b: usb1@1 { + reg = <1>; + fsl,pinmux-ids = < + MX28_PAD_PWM2__USB1_OVERCURRENT + >; + fsl,drive-strength = <MXS_DRIVE_12mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + usb0_id_pins_a: usb0id@0 { reg = <0>; fsl,pinmux-ids = < diff --git a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi index 665d63765cdc..d9de9b4f0c52 100644 --- a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi +++ b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi @@ -238,7 +238,6 @@ compatible = "wlf,wm8962"; reg = <0x1a>; clocks = <&clks IMX6QDL_CLK_CKO>; - clock-names = "xclk"; DCVDD-supply = <®_audio>; DBVDD-supply = <®_audio>; AVDD-supply = <®_audio>; diff --git a/arch/arm/boot/dts/imx6dl-plybas.dts b/arch/arm/boot/dts/imx6dl-plybas.dts new file mode 100644 index 000000000000..333c306aa946 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-plybas.dts @@ -0,0 +1,394 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2014 Protonic Holland + * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include "imx6dl.dtsi" + +/ { + model = "Plymovent BAS board"; + compatible = "ply,plybas", "fsl,imx6dl"; + + chosen { + stdout-path = &uart4; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + button@20 { + label = "START"; + linux,code = <31>; + gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; + }; + + button@21 { + label = "CLEAN"; + linux,code = <46>; + gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-0 { + label = "debug0"; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + }; + + led-1 { + label = "debug1"; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + }; + + led-2 { + label = "light_tower1"; + gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led-3 { + label = "light_tower2"; + gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>; + }; + + led-4 { + label = "light_tower3"; + gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; + }; + + led-5 { + label = "light_tower4"; + gpios = <&gpio4 25 GPIO_ACTIVE_HIGH>; + }; + }; + + clk50m_phy: phy-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + xceiver-supply = <®_5v0>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2>; + xceiver-supply = <®_5v0>; + status = "okay"; +}; + +&ecspi1 { + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rmii"; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&clk50m_phy>; + clock-names = "ipg", "ahb", "ptp"; + phy-handle = <&rgmii_phy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Microchip KSZ8081RNA PHY */ + rgmii_phy: ethernet-phy@0 { + reg = <0>; + interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; + }; +}; + +&gpio1 { + gpio-line-names = + "", "SD1_CD", "", "", "", "", "", "", + "DEBUG_0", "DEBUG_1", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "ECSPI1_SS1", "", "USB_EXT_PWR", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "CAN1_SR", "CAN2_SR", "", "", + "LED_DI0_DEBUG_0", "LED_DI0_DEBUG_1", "IMX6_IN12", "IMX6_HMI", + "IMX6_IN11", "IMX6_BUZZER", "IMX6_LED1", "IMX6_LED2", + "IMX6_LED3", "IMX6_LED4", "ETH_RESET", "IMX6_ANA_OUT_SD", + "IMX6_ANA_OUT_ERR", "IMX6_ANA_OUT", "ETH_INTRP", ""; +}; + +&gpio5 { + gpio-line-names = + "", "", "", "", "", "IMX6_RELAY1", "IMX6_RELAY2", "", + "IMX6_IN1", "IMX6_IN2", "IMX6_IN3", "IMX6_IN4", "IMX6_IN5", + "IMX6_IN6", "IMX6_IN7", "IMX6_IN8", + "IMX6_IN9", "IMX6_IN10", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + /* additional i2c devices are added automatically by the boot loader */ +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + temperature-sensor@70 { + compatible = "ti,tmp103"; + reg = <0x70>; + }; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + fsl,uart-has-rtscts; + linux,rs485-enabled-at-boot-time; + rs485-rts-delay = <0 20>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + phy_type = "utmi"; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbphynop1 { + status = "disabled"; +}; + +&usbphynop2 { + status = "disabled"; +}; + +&iomuxc { + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b000 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x3008 + /* CAN1_SR */ + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13008 + >; + }; + + pinctrl_can2: can2grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b000 + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x3008 + /* CAN2_SR */ + MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x13008 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x1b000 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x3008 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x3008 + /* CS */ + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x3008 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + /* MX6QDL_ENET_PINGRP4 */ + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0 + /* nINTRP */ + MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + /* DEBUG_0 */ + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 + /* DEBUG_1 */ + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + + /* LED1 (lighttower) */ + MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22 0x13070 + /* LED2 (lighttower) */ + MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23 0x13070 + /* LED3 (lighttower) */ + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x13070 + /* LED4 (lighttower) */ + MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x13070 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0 + >; + }; + + /* YaCO AUX Uart */ + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x130b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 + MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-plym2m.dts b/arch/arm/boot/dts/imx6dl-plym2m.dts new file mode 100644 index 000000000000..4d0d3d3386af --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-plym2m.dts @@ -0,0 +1,446 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2014 Protonic Holland + * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include "imx6dl.dtsi" + +/ { + model = "Plymovent M2M board"; + compatible = "ply,plym2m", "fsl,imx6dl"; + + chosen { + stdout-path = &uart4; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000 0>; + brightness-levels = <0 1000>; + num-interpolated-steps = <20>; + default-brightness-level = <19>; + power-supply = <®_12v0>; + }; + + display { + compatible = "fsl,imx-parallel-display"; + pinctrl-0 = <&pinctrl_ipu1_disp>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-0 { + label = "debug0"; + function = LED_FUNCTION_STATUS; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + panel { + compatible = "edt,etm0700g0bdh6"; + backlight = <&backlight>; + power-supply = <®_3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + + clk50m_phy: phy-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_12v0: regulator-12v0 { + compatible = "regulator-fixed"; + regulator-name = "12v0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + xceiver-supply = <®_5v0>; + status = "okay"; +}; + +&ecspi1 { + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + }; +}; + +&ecspi2 { + cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; + + touchscreen@0 { + compatible = "ti,tsc2046"; + reg = <0>; + pinctrl-0 = <&pinctrl_tsc2046>; + pinctrl-names ="default"; + spi-max-frequency = <100000>; + interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>; + pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>; + + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + touchscreen-inverted-x; + touchscreen-inverted-y; + touchscreen-max-pressure = <4095>; + + ti,vref-delay-usecs = /bits/ 16 <100>; + ti,x-plate-ohms = /bits/ 16 <800>; + ti,y-plate-ohms = /bits/ 16 <300>; + + wakeup-source; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rmii"; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&clk50m_phy>; + clock-names = "ipg", "ahb", "ptp"; + phy-handle = <&rgmii_phy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Microchip KSZ8081RNA PHY */ + rgmii_phy: ethernet-phy@0 { + reg = <0>; + interrupts-extended = <&gpio5 23 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; + }; +}; + +&gpio1 { + gpio-line-names = + "CAN1_TERM", "SD1_CD", "", "", "", "", "", "", + "DEBUG_0", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "ECSPI2_SS0", "", "", "", "TSC_BUSY", ""; +}; + +&gpio3 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "ECSPI1_SS1", "TSC_PENIRQ", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "CAN1_SR", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio5 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "ETH_RESET", "ETH_INTRP", + "", "", "", "", "", "", "", ""; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + /* additional i2c devices are added automatically by the boot loader */ +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + temperature-sensor@70 { + compatible = "ti,tmp103"; + reg = <0x70>; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display_in>; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbphynop1 { + status = "disabled"; +}; + +&usbphynop2 { + status = "disabled"; +}; + +&usbotg { + phy_type = "utmi"; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + no-1-8-v; + disable-wp; + cap-sd-highspeed; + no-mmc; + no-sdio; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + no-1-8-v; + non-removable; + no-sd; + no-sdio; + status = "okay"; +}; + +&iomuxc { + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b000 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x3008 + /* CAN1_SR */ + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13008 + /* CAN1_TERM */ + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b088 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x1b000 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x3008 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x3008 + /* CS */ + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x3008 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x10000 + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x3008 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x3008 + /* CS */ + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x3008 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + /* MX6QDL_ENET_PINGRP4 */ + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22 0x1b0b0 + /* nINTRP */ + MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_ipu1_disp: ipudisp1grp { + fsl,pins = < + /* DSE 0x30 => 25 Ohm, 0x20 => 37 Ohm, 0x10 => 75 Ohm */ + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x30 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x30 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x30 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x30 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x30 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x30 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x30 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x30 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x30 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x30 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x30 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x30 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x30 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x30 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x30 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x30 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x30 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x30 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x30 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x30 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x30 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x30 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x8 + >; + }; + + pinctrl_tsc2046: tsc2046grp { + fsl,pins = < + /* TSC_PENIRQ */ + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b1 + /* TSC_BUSY */ + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 + MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-prtmvt.dts b/arch/arm/boot/dts/imx6dl-prtmvt.dts new file mode 100644 index 000000000000..a35a1c66e770 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-prtmvt.dts @@ -0,0 +1,852 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2016 Protonic Holland + * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix + */ + +/dts-v1/; +#include <dt-bindings/display/sdtv-standards.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/media/tvp5150.h> +#include <dt-bindings/sound/fsl-imx-audmux.h> +#include "imx6dl.dtsi" + +/ { + model = "Protonic MVT board"; + compatible = "prt,prtmvt", "fsl,imx6dl"; + + chosen { + stdout-path = &uart4; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + pwms = <&pwm1 0 5000000 0>; + brightness-levels = <0 16 64 255>; + num-interpolated-steps = <16>; + default-brightness-level = <1>; + power-supply = <®_3v3>; + enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; + }; + + connector { + compatible = "composite-video-connector"; + label = "Composite0"; + sdtv-standards = <SDTV_STD_PAL_B>; + + port { + comp0_out: endpoint { + remote-endpoint = <&tvp5150_comp0_in>; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys>; + autorepeat; + + power { + label = "Power Button"; + gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + + f1 { + label = "GPIO Key F1"; + linux,code = <KEY_F1>; + gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>; + }; + + f2 { + label = "GPIO Key F2"; + linux,code = <KEY_F2>; + gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>; + }; + + f3 { + label = "GPIO Key F3"; + linux,code = <KEY_F3>; + gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>; + }; + + f4 { + label = "GPIO Key F4"; + linux,code = <KEY_F4>; + gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>; + }; + + f5 { + label = "GPIO Key F5"; + linux,code = <KEY_F5>; + gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>; + }; + + cycle { + label = "GPIO Key CYCLE"; + linux,code = <KEY_CYCLEWINDOWS>; + gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>; + }; + + esc { + label = "GPIO Key ESC"; + linux,code = <KEY_ESC>; + gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>; + }; + + up { + label = "GPIO Key UP"; + linux,code = <KEY_UP>; + gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>; + }; + + down { + label = "GPIO Key DOWN"; + linux,code = <KEY_DOWN>; + gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>; + }; + + ok { + label = "GPIO Key OK"; + linux,code = <KEY_OK>; + gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>; + }; + + f6 { + label = "GPIO Key F6"; + linux,code = <KEY_F6>; + gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>; + }; + + f7 { + label = "GPIO Key F7"; + linux,code = <KEY_F7>; + gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>; + }; + + f8 { + label = "GPIO Key F8"; + linux,code = <KEY_F8>; + gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>; + }; + + f9 { + label = "GPIO Key F9"; + linux,code = <KEY_F9>; + gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>; + }; + + f10 { + label = "GPIO Key F10"; + linux,code = <KEY_F10>; + gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>; + }; + + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-0 { + label = "debug0"; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + label = "debug1"; + function = LED_FUNCTION_DISK; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "disk-activity"; + }; + + led-2 { + label = "power_led"; + function = LED_FUNCTION_POWER; + gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + panel { + compatible = "kyo,tcg070wvlq", "lg,lb070wv8"; + backlight = <&backlight>; + power-supply = <®_3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + clk50m_phy: phy-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_h1_vbus: regulator-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "h1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_otg_vbus: regulator-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "otg-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "prti6q-sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Line", "Line In Jack", + "Headphone", "Headphone Jack", + "Speaker", "External Speaker"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "External Speaker", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&ssi1>; + system-clock-frequency = <0>; + }; + + simple-audio-card,codec { + sound-dai = <&codec>; + bitclock-master; + frame-master; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; + + mux-ssi1 { + fsl,audmux-port = <0>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN 0 + IMX_AUDMUX_V2_PTCR_TFSEL(2) 0 + IMX_AUDMUX_V2_PTCR_TCSEL(2) 0 + IMX_AUDMUX_V2_PTCR_TFSDIR 0 + IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2) + >; + }; + + mux-pins3 { + fsl,audmux-port = <2>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0) + 0 IMX_AUDMUX_V2_PDCR_TXRXEN + >; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>; +}; + +&ecspi1 { + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rmii"; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&clk50m_phy>; + clock-names = "ipg", "ahb", "ptp"; + phy-handle = <&rmii_phy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Microchip KSZ8081RNA PHY */ + rmii_phy: ethernet-phy@0 { + reg = <0>; + interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <3000>; + }; + }; +}; + +&gpio1 { + gpio-line-names = + "CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR", + "CAM2_MIRROR", "", "", "SMBALERT", + "DEBUG_0", "DEBUG_1", "", "", "", "", "", "", + "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK", + "SD1_DATA3", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4", + "BOARD_ID0", "BOARD_ID1", "BOARD_ID2", + "", "", "", "", "", "", "", "ON_SWITCH", + "POWER_LED", "", "", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1", + "CPU_ON1_FB", "USB_EXT1_OC", "USB_EXT1_PWR", "YACO_IRQ", + "TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0", + "YACO_RESET"; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "CAN1_SR", "CAN2_SR", "CAN2_TX", "CAN2_RX", + "", "", "DIP1_FB", "", "", "", "", "", + "CPU_LIGHT_ON", "", "ETH_RESET", "", "BL_EN", + "BL_PWM", "ETH_INTRP", ""; +}; + +&gpio5 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX", + "YACO_AUX_TX", "ITU656_D0", "ITU656_D1"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: audio-codec@a { + compatible = "fsl,sgtl5000"; + reg = <0xa>; + #sound-dai-cells = <0>; + clocks = <&clks 201>; + VDDA-supply = <®_3v3>; + VDDIO-supply = <®_3v3>; + VDDD-supply = <®_1v8>; + }; + + video@5c { + compatible = "ti,tvp5150"; + reg = <0x5c>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tvp5150_comp0_in: endpoint { + remote-endpoint = <&comp0_out>; + }; + }; + + /* Output port 2 is video output pad */ + port@2 { + reg = <2>; + tvp5151_to_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + }; + }; + }; + + gpio_pca: gpio@74 { + compatible = "nxp,pca9539"; + reg = <0x74>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pca9539>; + interrupt-parent = <&gpio4>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + gpio-controller; + #gpio-cells = <2>; + }; + + /* additional i2c devices are added automatically by the boot loader */ +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + adc@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + + channel@4 { + reg = <4>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + channel@5 { + reg = <5>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + channel@6 { + reg = <6>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + channel@7 { + reg = <7>; + ti,gain = <3>; + ti,datarate = <3>; + }; + }; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + temperature-sensor@70 { + compatible = "ti,tmp103"; + reg = <0x70>; + }; +}; + +&ipu1_csi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi0>; + status = "okay"; +}; + +&ipu1_csi0_mux_from_parallel_sensor { + remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&ssi1 { + #sound-dai-cells = <0>; + fsl,mode = "ac97-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_h1_vbus>; + pinctrl-names = "default"; + phy_type = "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + phy_type = "utmi"; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + no-1-8-v; + disable-wp; + cap-sd-highspeed; + no-mmc; + no-sdio; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + no-1-8-v; + non-removable; + no-sd; + no-sdio; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + /* SGTL5000 sys_mclk */ + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x030b0 + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_backlight: backlightgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b0b0 + >; + }; + + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b000 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x3008 + /* CAN1_SR */ + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13008 + /* CAN1_TERM */ + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b088 + >; + }; + + pinctrl_can2: can2grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b000 + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x3008 + /* CAN2_SR */ + MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x13008 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + /* CS */ + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + /* MX6QDL_ENET_PINGRP4 */ + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0 + /* nINTRP */ + MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0 + >; + }; + + pinctrl_gpiokeys: gpiokeygrp { + fsl,pins = < + /* nON_SWITCH */ + MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + /* ITU656_nRESET */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + /* CAM1_MIRROR */ + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x130b0 + /* CAM2_MIRROR */ + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0 + /* CAM_nDETECT */ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + /* ISB_IN1 */ + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0 + /* ISB_nIN2 */ + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0 + /* WARN_LIGHT */ + MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x100b0 + /* ON2_FB */ + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b0 + /* YACO_nIRQ */ + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0 + /* YACO_BOOT0 */ + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x130b0 + /* YACO_nRESET */ + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0 + /* FORCE_ON1 */ + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 + /* AUDIO_nRESET */ + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1f0b0 + /* ITU656_nPDN */ + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0 + + /* HW revision detect */ + /* REV_ID0 */ + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 + /* REV_ID1 */ + MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 + /* REV_ID2 */ + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 + /* REV_ID3 */ + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 + /* REV_ID4 */ + MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 + + /* New in HW revision 1 */ + /* ON1_FB */ + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x100b0 + /* DIP1_FB */ + MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_ipu1_csi0: ipu1csi0grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + /* DEBUG0 */ + MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x1b0b0 + /* DEBUG1 */ + MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x1b0b0 + /* POWER_LED */ + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b0 + >; + }; + + pinctrl_pca9539: pca9539 { + fsl,pins = < + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0 + >; + }; + + /* YaCO AUX Uart */ + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + /* YaCO Touchscreen UART */ + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 + MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-victgo.dts b/arch/arm/boot/dts/imx6dl-victgo.dts new file mode 100644 index 000000000000..d37ba4ed847d --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-victgo.dts @@ -0,0 +1,852 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2016 Protonic Holland + * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix + */ + +/dts-v1/; +#include <dt-bindings/display/sdtv-standards.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/media/tvp5150.h> +#include <dt-bindings/sound/fsl-imx-audmux.h> +#include "imx6dl.dtsi" + +/ { + model = "Kverneland TGO"; + compatible = "kvg,victgo", "fsl,imx6dl"; + + chosen { + stdout-path = &uart4; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + pwms = <&pwm1 0 5000000 0>; + brightness-levels = <0 16 64 255>; + num-interpolated-steps = <16>; + default-brightness-level = <1>; + power-supply = <®_3v3>; + enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; + }; + + connector { + compatible = "composite-video-connector"; + label = "Composite0"; + sdtv-standards = <SDTV_STD_PAL_B>; + + port { + comp0_out: endpoint { + remote-endpoint = <&tvp5150_comp0_in>; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys>; + autorepeat; + + power { + label = "Power Button"; + gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + + enter { + label = "Rotary Key"; + gpios = <&gpio2 05 GPIO_ACTIVE_LOW>; + linux,code = <KEY_ENTER>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-0 { + label = "debug0"; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + label = "debug1"; + function = LED_FUNCTION_DISK; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "disk-activity"; + }; + + led-2 { + label = "power_led"; + function = LED_FUNCTION_POWER; + gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + panel { + compatible = "kyo,tcg121xglp"; + backlight = <&backlight>; + power-supply = <®_3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + clk50m_phy: phy-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_h1_vbus: regulator-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "h1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_otg_vbus: regulator-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "otg-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + rotary-encoder { + compatible = "rotary-encoder"; + pinctrl-0 = <&pinctrl_rotary_ch>; + gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>, + <&gpio2 4 GPIO_ACTIVE_HIGH>; + linux,axis = <REL_WHEEL>; + rotary-encoder,steps-per-period = <4>; + rotary-encoder,relative-axis; + rotary-encoder,rollover; + wakeup-source; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "prti6q-sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Line", "Line In Jack", + "Headphone", "Headphone Jack", + "Speaker", "External Speaker"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "External Speaker", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&ssi1>; + system-clock-frequency = <0>; + }; + + simple-audio-card,codec { + sound-dai = <&codec>; + bitclock-master; + frame-master; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; + + mux-ssi1 { + fsl,audmux-port = <0>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN 0 + IMX_AUDMUX_V2_PTCR_TFSEL(2) 0 + IMX_AUDMUX_V2_PTCR_TCSEL(2) 0 + IMX_AUDMUX_V2_PTCR_TFSDIR 0 + IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2) + >; + }; + + mux-pins3 { + fsl,audmux-port = <2>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0) + 0 IMX_AUDMUX_V2_PDCR_TXRXEN + >; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>; +}; + +&ecspi1 { + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + }; +}; + +&ecspi2 { + cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; + + touchscreen@0 { + compatible = "ti,tsc2046"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchscreen>; + spi-max-frequency = <200000>; + interrupts-extended = <&gpio5 8 IRQ_TYPE_EDGE_FALLING>; + pendown-gpio = <&gpio5 8 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + touchscreen-inverted-y; + touchscreen-max-pressure = <4095>; + ti,vref-delay-usecs = /bits/ 16 <100>; + ti,x-plate-ohms = /bits/ 16 <800>; + ti,y-plate-ohms = /bits/ 16 <300>; + wakeup-source; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rmii"; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&clk50m_phy>; + clock-names = "ipg", "ahb", "ptp"; + phy-handle = <&rmii_phy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Microchip KSZ8081RNA PHY */ + rmii_phy: ethernet-phy@0 { + reg = <0>; + interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; + }; +}; + +&gpio1 { + gpio-line-names = + "CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR", + "CAM2_MIRROR", "", "", "SMBALERT", + "DEBUG_0", "DEBUG_1", "", "", "", "", "", "", + "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK", + "SD1_DATA3", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4", + "BOARD_ID0", "BOARD_ID1", "BOARD_ID2", + "", "", "", "", "", "", "ISB_IN1", "ON_SWITCH", + "POWER_LED", "", "", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1", + "CPU_ON1_FB", "USB_EXT1_OC", "USB_EXT1_PWR", "YACO_IRQ", + "TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0", + "YACO_RESET"; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "CAN1_SR", "CAN2_SR", "CAN2_TX", "CAN2_RX", + "", "", "DIP1_FB", "", "VCAM_EN", "", "", "", + "CPU_LIGHT_ON", "", "ETH_RESET", "CPU_CONTACT_IN", "BL_EN", + "BL_PWM", "ETH_INTRP", "ISB_LED"; +}; + +&gpio5 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "TSC_PENIRQ", "TSC_BUSY", "ECSPI2_MOSI", "ECSPI2_MISO", + "ECSPI2_SS0", "ECSPI2_SCLK", "", "", + "", "", "", "", "", "", "", "", + "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX", + "YACO_AUX_TX", "ITU656_D0", "ITU656_D1"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: audio-codec@a { + compatible = "fsl,sgtl5000"; + reg = <0xa>; + #sound-dai-cells = <0>; + clocks = <&clks 201>; + VDDA-supply = <®_3v3>; + VDDIO-supply = <®_3v3>; + VDDD-supply = <®_1v8>; + }; + + video-decoder@5c { + compatible = "ti,tvp5150"; + reg = <0x5c>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tvp5150_comp0_in: endpoint { + remote-endpoint = <&comp0_out>; + }; + }; + + /* Output port 2 is video output pad */ + port@2 { + reg = <2>; + + tvp5151_to_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + }; + }; + }; + + keypad@70 { + compatible = "holtek,ht16k33"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_keypad>; + reg = <0x70>; + refresh-rate-hz = <20>; + debounce-delay-ms = <50>; + interrupts-extended = <&gpio4 5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>; + keypad,num-rows = <12>; + keypad,num-columns = <3>; + linux,keymap = < + MATRIX_KEY(2, 0, KEY_F6) + MATRIX_KEY(3, 0, KEY_F8) + MATRIX_KEY(4, 0, KEY_F10) + MATRIX_KEY(5, 0, KEY_F4) + MATRIX_KEY(6, 0, KEY_F2) + MATRIX_KEY(2, 1, KEY_F5) + MATRIX_KEY(3, 1, KEY_F7) + MATRIX_KEY(4, 1, KEY_F9) + MATRIX_KEY(5, 1, KEY_F3) + MATRIX_KEY(6, 1, KEY_F1) + >; + }; + + /* additional i2c devices are added automatically by the boot loader */ +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + adc@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + + channel@4 { + reg = <4>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + channel@5 { + reg = <5>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + channel@6 { + reg = <6>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + channel@7 { + reg = <7>; + ti,gain = <3>; + ti,datarate = <3>; + }; + }; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + temperature-sensor@70 { + compatible = "ti,tmp103"; + reg = <0x70>; + }; +}; + +&ipu1_csi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi0>; + status = "okay"; +}; + +&ipu1_csi0_mux_from_parallel_sensor { + remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&ssi1 { + #sound-dai-cells = <0>; + fsl,mode = "ac97-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_h1_vbus>; + pinctrl-names = "default"; + phy_type = "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + phy_type = "utmi"; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + no-1-8-v; + disable-wp; + cap-sd-highspeed; + no-mmc; + no-sdio; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + no-1-8-v; + non-removable; + no-sd; + no-sdio; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + /* SGTL5000 sys_mclk */ + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x030b0 + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_backlight: backlightgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b0b0 + >; + }; + + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b000 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x3008 + /* CAN1_SR */ + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13008 + /* CAN1_TERM */ + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b088 + >; + }; + + pinctrl_can2: can2grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b000 + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x3008 + /* CAN2_SR */ + MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x13008 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + /* CS */ + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1 + MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x100b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + /* MX6QDL_ENET_PINGRP4 */ + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0 + /* nINTRP */ + MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0 + >; + }; + + pinctrl_gpiokeys: gpiokeygrp { + fsl,pins = < + /* ROTARY_BTN */ + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x1b0b0 + /* nON_SWITCH */ + MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + /* ITU656_nRESET */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + /* CAM1_MIRROR */ + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x130b0 + /* CAM2_MIRROR */ + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0 + /* CAM_nDETECT */ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + /* ISB_IN1 */ + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0 + /* ISB_nIN2 */ + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0 + /* WARN_LIGHT */ + MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x100b0 + /* ON2_FB */ + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b0 + /* YACO_nIRQ */ + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0 + /* YACO_BOOT0 */ + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x130b0 + /* YACO_nRESET */ + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0 + /* FORCE_ON1 */ + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 + /* AUDIO_nRESET */ + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1f0b0 + /* ITU656_nPDN */ + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0 + + /* HW revision detect */ + /* REV_ID0 */ + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 + /* REV_ID1 is shared with PWM3 */ + /* REV_ID2 */ + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 + /* REV_ID3 */ + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 + /* REV_ID4 */ + MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 + + /* New in HW revision 1 */ + /* ON1_FB */ + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x100b0 + /* DIP1_FB */ + MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_ipu1_csi0: ipu1csi0grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 + >; + }; + + pinctrl_keypad: keypadgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + /* DEBUG0 */ + MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x1b0b0 + /* DEBUG1 */ + MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x1b0b0 + /* POWER_LED */ + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b0 + >; + }; + + pinctrl_rotary_ch: rotarychgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 + >; + }; + + pinctrl_touchscreen: touchscreengrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x1b0b0 + MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b0 + >; + }; + + /* YaCO AUX Uart */ + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + /* YaCO Touchscreen UART */ + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 + MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-vicut1.dts b/arch/arm/boot/dts/imx6dl-vicut1.dts new file mode 100644 index 000000000000..174fd913bf96 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-vicut1.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2014 Protonic Holland + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-vicut1.dtsi" + +/ { + model = "Kverneland UT1 Board"; + compatible = "kvg,vicut1", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts index 861e05d53157..343364d3e4f7 100644 --- a/arch/arm/boot/dts/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts @@ -16,6 +16,13 @@ stdout-path = &uart1; }; + aliases { + mmc0 = &usdhc2; + mmc1 = &usdhc3; + mmc2 = &usdhc4; + /delete-property/ mmc3; + }; + memory@10000000 { device_type = "memory"; reg = <0x10000000 0x80000000>; diff --git a/arch/arm/boot/dts/imx6q-vicut1.dts b/arch/arm/boot/dts/imx6q-vicut1.dts new file mode 100644 index 000000000000..0a4e251be162 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-vicut1.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2014 Protonic Holland + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-vicut1.dtsi" + +/ { + model = "Kverneland UT1Q Board"; + compatible = "kvg,vicut1q", "fsl,imx6q"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 5277e3903291..8d209c1b3ca7 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -406,19 +406,21 @@ &hdmi { compatible = "fsl,imx6q-hdmi"; - port@2 { - reg = <2>; + ports { + port@2 { + reg = <2>; - hdmi_mux_2: endpoint { - remote-endpoint = <&ipu2_di0_hdmi>; + hdmi_mux_2: endpoint { + remote-endpoint = <&ipu2_di0_hdmi>; + }; }; - }; - port@3 { - reg = <3>; + port@3 { + reg = <3>; - hdmi_mux_3: endpoint { - remote-endpoint = <&ipu2_di1_hdmi>; + hdmi_mux_3: endpoint { + remote-endpoint = <&ipu2_di1_hdmi>; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 736074f1c3ef..959d8ac2e393 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -418,7 +418,7 @@ /* VDD_AUD_1P8: Audio codec */ reg_aud_1p8v: ldo3 { - regulator-name = "vdd1p8"; + regulator-name = "vdd1p8a"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi index d6df598bd1c2..b167b33bd108 100644 --- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi @@ -137,7 +137,7 @@ lcd_backlight: lcd-backlight { compatible = "pwm-backlight"; - pwms = <&pwm4 0 5000000>; + pwms = <&pwm4 0 5000000 0>; pwm-names = "LCD_BKLT_PWM"; brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; @@ -167,7 +167,7 @@ i2c-gpio,delay-us = <2>; /* ~100 kHz */ #address-cells = <1>; #size-cells = <0>; - status = "disabld"; + status = "disabled"; }; i2c_cam: i2c-gpio-cam { @@ -179,7 +179,7 @@ i2c-gpio,delay-us = <2>; /* ~100 kHz */ #address-cells = <1>; #size-cells = <0>; - status = "disabld"; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index afe477f32984..5e58740d40c5 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -298,6 +298,7 @@ interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; + fsl,magic-packet; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi index b06577808ff4..0ad8ccde0cf8 100644 --- a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi @@ -53,7 +53,6 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_microsom_enet_ar8035>; - phy-handle = <&phy>; phy-mode = "rgmii-id"; phy-reset-duration = <2>; phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; @@ -63,9 +62,20 @@ #address-cells = <1>; #size-cells = <0>; - phy: ethernet-phy@0 { + /* + * The PHY can appear at either address 0 or 4 due to the + * configuration (LED) pin not being pulled sufficiently. + */ + ethernet-phy@0 { reg = <0>; qca,clk-out-frequency = <125000000>; + qca,smarteee-tw-us-1g = <24>; + }; + + ethernet-phy@4 { + reg = <4>; + qca,clk-out-frequency = <125000000>; + qca,smarteee-tw-us-1g = <24>; }; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi new file mode 100644 index 000000000000..eb25d21a2ace --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi @@ -0,0 +1,803 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2014 Protonic Holland + * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix + */ + +#include <dt-bindings/display/sdtv-standards.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/media/tvp5150.h> +#include <dt-bindings/sound/fsl-imx-audmux.h> + +/ { + chosen { + stdout-path = &uart4; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + pwms = <&pwm1 0 5000000 0>; + brightness-levels = <0 16 64 255>; + num-interpolated-steps = <16>; + default-brightness-level = <1>; + power-supply = <®_3v3>; + enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; + }; + + connector { + compatible = "composite-video-connector"; + label = "Composite0"; + sdtv-standards = <SDTV_STD_PAL_B>; + + port { + comp0_out: endpoint { + remote-endpoint = <&tvp5150_comp0_in>; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + power { + label = "Power Button"; + gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-0 { + label = "LED_DI0_DEBUG_0"; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + label = "LED_DI0_DEBUG_1"; + function = LED_FUNCTION_DISK; + gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "disk-activity"; + }; + + led-2 { + label = "POWER_LED"; + function = LED_FUNCTION_POWER; + gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + panel { + compatible = "kyo,tcg121xglp"; + backlight = <&backlight>; + power-supply = <®_3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_h1_vbus: regulator-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "h1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_otg_vbus: regulator-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "otg-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_wifi: regulator-wifi { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_npd>; + regulator-name = "wifi"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <70000>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "prti6q-sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Line", "Line In Jack", + "Headphone", "Headphone Jack", + "Speaker", "External Speaker"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "External Speaker", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&ssi1>; + system-clock-frequency = <0>; /* Do NOT call fsl_ssi_set_dai_sysclk! */ + }; + + simple-audio-card,codec { + sound-dai = <&codec>; + bitclock-master; + frame-master; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; + + mux-ssi1 { + fsl,audmux-port = <0>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN 0 + IMX_AUDMUX_V2_PTCR_TFSEL(2) 0 + IMX_AUDMUX_V2_PTCR_TCSEL(2) 0 + IMX_AUDMUX_V2_PTCR_TFSDIR 0 + IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2) + >; + }; + + mux-pins3 { + fsl,audmux-port = <2>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0) + 0 IMX_AUDMUX_V2_PDCR_TXRXEN + >; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>; +}; + +&ecspi1 { + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + phy-handle = <&rgmii_phy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Microchip KSZ9031RNX PHY */ + rgmii_phy: ethernet-phy@0 { + reg = <0>; + interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; + }; +}; + +&gpio1 { + gpio-line-names = + "CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR", + "CAM2_MIRROR", "", "", "SMBALERT", + "DEBUG_0", "DEBUG_1", "SDIO_SCK", "SDIO_CMD", "SDIO_D3", + "SDIO_D2", "SDIO_D1", "SDIO_D0", + "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK", + "SD1_DATA3", "", "", + "", "ETH_RESET", "WIFI_PD", "WIFI_BT_RST", "ETH_INT", "", + "WL_IRQ", "ETH_MDC"; +}; + +&gpio2 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4", + "BOARD_ID0", "BOARD_ID1", "BOARD_ID2", + "", "", "", "", "", "", "", "ON_SWITCH", + "POWER_LED", "", "ECSPI2_SS0", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1", + "CPU_ON1_FB", "USB_OTG_OC", "USB_OTG_PWR", "YACO_IRQ", + "", "", "", "", "", "", "", ""; +}; + +&gpio4 { + gpio-line-names = + "", "", "", "", "", "", "UART4_TXD", "UART4_RXD", + "UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR", + "CAN2_SR", "CAN2_TX", "CAN2_RX", + "LED_DI0_DEBUG_0", "LED_DI0_DEBUG_1", "", "", "", "", "", "", + "", "", "", "", "BL_EN", "BL_PWM", "", ""; +}; + +&gpio5 { + gpio-line-names = + "", "", "", "", "", "PCIE_WAKE", "PCIE_CLKREQ", "PCIE_W_DIS", + "PCIE_RESET", "", "", "", "", "", "", "", + "", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET", + "I2S_BITCLK", "I2S_DOUT", + "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX", + "YACO_AUX_TX", "ITU656_D0", "ITU656_D1"; +}; + +&gpio6 { + gpio-line-names = + "ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5", + "ITU656_D6", "ITU656_D7", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2", + "RGMII_TD3", + "RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1", + "RGMII_RD2", "RGMII_RD3", "", ""; +}; + +&gpio7 { + gpio-line-names = + "EMMC_DAT5", "EMMC_DAT4", "EMMC_CMD", "EMMC_CLK", "EMMC_DAT0", + "EMMC_DAT1", "EMMC_DAT2", "EMMC_DAT3", + "EMMC_RST", "", "", "", "CAM_DETECT", "", "", "", + "", "EMMC_DAT7", "EMMC_DAT6", "", "", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: audio-codec@a { + compatible = "fsl,sgtl5000"; + reg = <0xa>; + #sound-dai-cells = <0>; + clocks = <&clks 201>; + VDDA-supply = <®_3v3>; + VDDIO-supply = <®_3v3>; + VDDD-supply = <®_1v8>; + }; + + video-decoder@5c { + compatible = "ti,tvp5150"; + reg = <0x5c>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tvp5150_comp0_in: endpoint { + remote-endpoint = <&comp0_out>; + }; + }; + + /* Output port 2 is video output pad */ + port@2 { + reg = <2>; + + tvp5151_to_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + adc@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + + channel@4 { + reg = <4>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + channel@5 { + reg = <5>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + channel@6 { + reg = <6>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + channel@7 { + reg = <7>; + ti,gain = <3>; + ti,datarate = <3>; + }; + }; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + temperature-sensor@70 { + compatible = "ti,tmp103"; + reg = <0x70>; + }; +}; + +&ipu1_csi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi0>; + status = "okay"; +}; + +&ipu1_csi0_mux_from_parallel_sensor { + remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&ssi1 { + #sound-dai-cells = <0>; + fsl,mode = "ac97-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_h1_vbus>; + pinctrl-names = "default"; + phy_type = "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + phy_type = "utmi"; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + no-1-8-v; + disable-wp; + cap-sd-highspeed; + no-mmc; + no-sdio; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + vmmc-supply = <®_wifi>; + non-removable; + cap-power-off-card; + keep-power-in-suspend; + no-1-8-v; + no-mmc; + no-sd; + status = "okay"; + + wifi { + compatible = "ti,wl1271"; + interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>; + ref-clock-frequency = "38400000"; + tcxo-clock-frequency = "19200000"; + }; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + no-1-8-v; + non-removable; + no-sd; + no-sdio; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + /* SGTL5000 sys_mclk */ + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x030b0 + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_backlight: backlightgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b0b0 + >; + }; + + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b000 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x3008 + /* CAN1_SR */ + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13008 + /* CAN1_TERM */ + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b088 + >; + }; + + pinctrl_can2: can2grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b000 + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x3008 + /* CAN2_SR */ + MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x13008 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + /* CS */ + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030 + /* Phy reset */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + /* ITU656_nRESET */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + /* CAM1_MIRROR */ + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x130b0 + /* CAM2_MIRROR */ + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0 + /* CAM_nDETECT */ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + /* nON_SWITCH */ + MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0 + /* ISB_IN1 */ + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0 + /* ISB_nIN2 */ + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0 + /* WARN_LIGHT */ + MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x100b0 + /* ON2_FB */ + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b0 + /* YACO_nIRQ */ + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0 + /* YACO_BOOT0 */ + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x130b0 + /* YACO_nRESET */ + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0 + /* FORCE_ON1 */ + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 + /* AUDIO_nRESET */ + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1f0b0 + /* ITU656_nPDN */ + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0 + + /* HW revision detect */ + /* REV_ID0 */ + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 + /* REV_ID1 */ + MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 + /* REV_ID2 */ + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 + /* REV_ID3 */ + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 + /* REV_ID4 */ + MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 + + /* New in HW revision 1 */ + /* ON1_FB */ + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x100b0 + /* DIP1_FB */ + MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 + + /* New in UT2: FIXME: ISB PWM should start off, PD */ + /* ISB_LED_PWM */ + MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x130b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_ipu1_csi0: ipu1csi0grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + /* DEBUG0 */ + MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x1b0b0 + /* DEBUG1 */ + MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x1b0b0 + /* POWER_LED */ + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0 + >; + }; + + /* YaCO AUX Uart */ + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x1b0b1 + >; + }; + + /* YaCO Touchscreen UART */ + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 + MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + /* WL12xx IRQ */ + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x10880 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1 + >; + }; + + pinctrl_wifi_npd: wifinpdgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b8b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index c0a76202e16b..525ff62b47f5 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -112,17 +112,17 @@ sound1 { compatible = "simple-audio-card"; - simple-audio-card,name = "Front"; + simple-audio-card,name = "front"; simple-audio-card,format = "i2s"; simple-audio-card,bitclock-master = <&sound1_codec>; simple-audio-card,frame-master = <&sound1_codec>; simple-audio-card,widgets = "Headphone", "Headphone Jack"; simple-audio-card,routing = - "Headphone Jack", "HPLEFT", - "Headphone Jack", "HPRIGHT", - "LEFTIN", "HPL", - "RIGHTIN", "HPR"; + "Headphone Jack", "HPA1 HPLEFT", + "Headphone Jack", "HPA1 HPRIGHT", + "HPA1 LEFTIN", "HPL", + "HPA1 RIGHTIN", "HPR"; simple-audio-card,aux-devs = <&hpa1>; sound1_cpu: simple-audio-card,cpu { @@ -137,17 +137,17 @@ sound2 { compatible = "simple-audio-card"; - simple-audio-card,name = "Back"; + simple-audio-card,name = "periph"; simple-audio-card,format = "i2s"; simple-audio-card,bitclock-master = <&sound2_codec>; simple-audio-card,frame-master = <&sound2_codec>; simple-audio-card,widgets = "Headphone", "Headphone Jack"; simple-audio-card,routing = - "Headphone Jack", "HPLEFT", - "Headphone Jack", "HPRIGHT", - "LEFTIN", "HPL", - "RIGHTIN", "HPR"; + "Headphone Jack", "HPA1 HPLEFT", + "Headphone Jack", "HPA1 HPRIGHT", + "HPA1 LEFTIN", "HPL", + "HPA1 RIGHTIN", "HPR"; simple-audio-card,aux-devs = <&hpa2>; sound2_cpu: simple-audio-card,cpu { @@ -399,6 +399,7 @@ reg = <0x60>; power-gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; Vdd-supply = <®_5p0v_main>; + sound-name-prefix = "HPA1"; }; edp-bridge@68 { @@ -598,6 +599,8 @@ touchscreen-inverted-x; touchscreen-swapped-x-y; syna,sensor-type = <1>; + syna,delta-x-threshold = <5>; + syna,delta-y-threshold = <10>; }; rmi4-f12@12 { @@ -626,7 +629,7 @@ pinctrl-0 = <&pinctrl_ucs1002_pins>; reg = <0x32>; interrupts-extended = <&gpio5 2 IRQ_TYPE_EDGE_BOTH>, - <&gpio3 21 IRQ_TYPE_EDGE_BOTH>; + <&gpio3 21 IRQ_TYPE_EDGE_FALLING>; interrupt-names = "a_det", "alert"; }; @@ -637,6 +640,7 @@ reg = <0x60>; power-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; Vdd-supply = <®_5p0v_main>; + sound-name-prefix = "HPA1"; }; }; @@ -885,10 +889,6 @@ }; }; -&wdog1 { - status = "disabled"; -}; - &iomuxc { pinctrl_accel: accelgrp { fsl,pins = < @@ -988,22 +988,22 @@ pinctrl_i2c1: i2c1grp { fsl,pins = < - MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 - MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b811 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b811 >; }; pinctrl_i2c2: i2c2grp { fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b811 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b811 >; }; pinctrl_i2c3: i2c3grp { fsl,pins = < - MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b811 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b811 >; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 6f59a99cbe82..82e01ce026ea 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -182,8 +182,6 @@ }; hdmi: hdmi@120000 { - #address-cells = <1>; - #size-cells = <0>; reg = <0x00120000 0x9000>; interrupts = <0 115 0x04>; gpr = <&gpr>; @@ -192,19 +190,24 @@ clock-names = "iahb", "isfr"; status = "disabled"; - port@0 { - reg = <0>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; - hdmi_mux_0: endpoint { - remote-endpoint = <&ipu1_di0_hdmi>; + hdmi_mux_0: endpoint { + remote-endpoint = <&ipu1_di0_hdmi>; + }; }; - }; - port@1 { - reg = <1>; + port@1 { + reg = <1>; - hdmi_mux_1: endpoint { - remote-endpoint = <&ipu1_di1_hdmi>; + hdmi_mux_1: endpoint { + remote-endpoint = <&ipu1_di1_hdmi>; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx6qp-vicutp.dts b/arch/arm/boot/dts/imx6qp-vicutp.dts new file mode 100644 index 000000000000..7bad7ca6b12e --- /dev/null +++ b/arch/arm/boot/dts/imx6qp-vicutp.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2014 Protonic Holland + */ + +/dts-v1/; +#include "imx6qp.dtsi" +#include "imx6qdl-vicut1.dtsi" + +/ { + model = "Kverneland UT1P Board"; + compatible = "kvg,vicutp", "fsl,imx6qp"; +}; diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts index caa279608803..6ea5f918d059 100644 --- a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts +++ b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts @@ -340,7 +340,6 @@ MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x79 MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x79 MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x79 - MX6SL_PAD_KEY_ROW6__GPIO4_IO05 0x79 >; }; @@ -396,7 +395,14 @@ pinctrl_uart1: uart1grp { fsl,pins = < MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1 - MX6SL_PAD_UART1_RXD__UART1_TX_DATA 0x1b0b1 + MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6SL_PAD_KEY_ROW6__UART4_TX_DATA 0x1b0b1 + MX6SL_PAD_KEY_COL6__UART4_RX_DATA 0x1b0b1 >; }; @@ -543,11 +549,19 @@ }; &uart1 { + /* J4, through-holes */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; +&uart4 { + /* TP198, next to J4, SMD pads */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + &usdhc2 { pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; pinctrl-0 = <&pinctrl_usdhc2>; diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts b/arch/arm/boot/dts/imx6sl-tolino-shine3.dts index 27143ea0f0f1..e3f1e8d79528 100644 --- a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts +++ b/arch/arm/boot/dts/imx6sl-tolino-shine3.dts @@ -94,7 +94,6 @@ MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x79 MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x79 MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x79 - MX6SL_PAD_KEY_ROW6__GPIO4_IO05 0x79 >; }; @@ -156,7 +155,14 @@ pinctrl_uart1: uart1grp { fsl,pins = < MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1 - MX6SL_PAD_UART1_RXD__UART1_TX_DATA 0x1b0b1 + MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6SL_PAD_KEY_ROW6__UART4_TX_DATA 0x1b0b1 + MX6SL_PAD_KEY_COL6__UART4_RX_DATA 0x1b0b1 >; }; @@ -300,6 +306,11 @@ pinctrl-0 = <&pinctrl_uart1>; }; +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; +}; + &usdhc2 { pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; pinctrl-0 = <&pinctrl_usdhc2>; diff --git a/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts b/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts index 7214d1c98249..90b32f5eb529 100644 --- a/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts +++ b/arch/arm/boot/dts/imx6sll-kobo-clarahd.dts @@ -104,7 +104,6 @@ MX6SLL_PAD_KEY_ROW7__GPIO4_IO07 0x79 MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x79 MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x79 - MX6SLL_PAD_KEY_ROW6__GPIO4_IO05 0x79 >; }; @@ -170,6 +169,13 @@ >; }; + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6SLL_PAD_KEY_ROW6__UART4_DCE_TX 0x1b0b1 + MX6SLL_PAD_KEY_COL6__UART4_DCE_RX 0x1b0b1 + >; + }; + pinctrl_usbotg1: usbotg1grp { fsl,pins = < MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059 @@ -302,6 +308,11 @@ pinctrl-0 = <&pinctrl_uart1>; }; +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; +}; + &usdhc2 { pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep"; pinctrl-0 = <&pinctrl_usdhc2>; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index 1351d7f70a54..c6e85e4a0883 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -206,6 +206,7 @@ phy-mode = "rgmii-id"; phy-handle = <ðphy1>; phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; + fsl,magic-packet; status = "okay"; mdio { @@ -227,6 +228,7 @@ pinctrl-0 = <&pinctrl_enet2>; phy-mode = "rgmii-id"; phy-handle = <ðphy2>; + fsl,magic-packet; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi index 64c2d1e9f7fc..c593597b2119 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi @@ -101,7 +101,7 @@ status = "okay"; gpio-sck = <&gpio5 11 0>; gpio-mosi = <&gpio5 10 0>; - cs-gpios = <&gpio5 7 0>; + cs-gpios = <&gpio5 7 GPIO_ACTIVE_LOW>; num-chipselects = <1>; #address-cells = <1>; #size-cells = <0>; @@ -113,6 +113,7 @@ reg = <0>; registers-number = <1>; spi-max-frequency = <100000>; + enable-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; }; }; @@ -145,6 +146,41 @@ reg = <0x1a>; wlf,shared-lrclk; }; + + camera@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_camera_clock>; + clocks = <&clks IMX6UL_CLK_CSI>; + clock-names = "xclk"; + powerdown-gpios = <&gpio_spi 6 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio_spi 5 GPIO_ACTIVE_LOW>; + + port { + ov5640_to_parallel: endpoint { + remote-endpoint = <¶llel_from_ov5640>; + bus-width = <8>; + data-shift = <2>; /* lines 9:2 are used */ + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <1>; + }; + }; + }; +}; + +&csi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_csi1>; + status = "okay"; + + port { + parallel_from_ov5640: endpoint { + remote-endpoint = <&ov5640_to_parallel>; + bus-type = <5>; /* Parallel bus */ + }; + }; }; &fec1 { @@ -169,17 +205,26 @@ #size-cells = <0>; ethphy0: ethernet-phy@2 { + compatible = "ethernet-phy-id0022.1560"; reg = <2>; micrel,led-mode = <1>; clocks = <&clks IMX6UL_CLK_ENET_REF>; clock-names = "rmii-ref"; + reset-gpios = <&gpio_spi 1 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <100>; + }; ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0022.1560"; reg = <1>; micrel,led-mode = <1>; clocks = <&clks IMX6UL_CLK_ENET2_REF>; clock-names = "rmii-ref"; + reset-gpios = <&gpio_spi 2 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <100>; }; }; }; @@ -343,9 +388,14 @@ &iomuxc { pinctrl-names = "default"; - pinctrl_csi1: csi1grp { + pinctrl_camera_clock: cameraclockgrp { fsl,pins = < MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088 + >; + }; + + pinctrl_csi1: csi1grp { + fsl,pins = < MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088 MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088 MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x1b088 diff --git a/arch/arm/boot/dts/imx6ul-prti6g.dts b/arch/arm/boot/dts/imx6ul-prti6g.dts new file mode 100644 index 000000000000..d62015701d0a --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-prti6g.dts @@ -0,0 +1,356 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2016 Protonic Holland + * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix + */ + +/dts-v1/; +#include "imx6ul.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Protonic PRTI6G Board"; + compatible = "prt,prti6g", "fsl,imx6ul"; + + chosen { + stdout-path = &uart1; + }; + + clock_ksz8081_in: clock-ksz8081-in { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + clock_ksz8081_out: clock-ksz8081-out { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-0 { + label = "debug0"; + gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_3v2: regulator-3v2 { + compatible = "regulator-fixed"; + regulator-name = "3v2"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2>; + status = "okay"; +}; + +&ecspi1 { + cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + }; +}; + +&ecspi2 { + cs-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; + + spi@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <1000000>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eth1>; + phy-mode = "rmii"; + phy-handle = <&rmii_phy>; + clocks = <&clks IMX6UL_CLK_ENET>, + <&clks IMX6UL_CLK_ENET_AHB>, + <&clks IMX6UL_CLK_ENET_PTP>, + <&clock_ksz8081_out>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref"; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Microchip KSZ8081RNA PHY */ + rmii_phy: ethernet-phy@0 { + reg = <0>; + interrupts-extended = <&gpio5 1 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + clocks = <&clock_ksz8081_in>; + clock-names = "rmii-ref"; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <100000>; + status = "okay"; + + /* additional i2c devices are added automatically by the boot loader */ +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "okay"; + + adc@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + + channel@4 { + reg = <4>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + channel@5 { + reg = <5>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + channel@6 { + reg = <6>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + channel@7 { + reg = <7>; + ti,gain = <3>; + ti,datarate = <3>; + }; + }; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + temperature-sensor@70 { + compatible = "ti,tmp103"; + reg = <0x70>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_3v2>; + no-1-8-v; + disable-wp; + cap-sd-highspeed; + no-mmc; + no-sdio; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <8>; + no-1-8-v; + non-removable; + no-sd; + no-sdio; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_can1: can1grp { + fsl,pins = < + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0 + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0 + /* SR */ + MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0b0b0 + /* TERM */ + MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0 + /* nSMBALERT */ + MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0b0b0 + >; + }; + + pinctrl_can2: can2grp { + fsl,pins = < + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x0b0b0 + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x0b0b0 + /* SR */ + MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK 0x0b0b0 + MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x000b1 + MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI 0x0b0b0 + MX6UL_PAD_CSI_DATA07__ECSPI1_MISO 0x0b0b0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK 0x0b0b0 + MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x000b1 + MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI 0x0b0b0 + MX6UL_PAD_CSI_DATA03__ECSPI2_MISO 0x0b0b0 + >; + }; + + pinctrl_eth1: eth1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x100b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x100b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x1b000 + /* PHY ENET1_RST */ + MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x00880 + /* PHY ENET1_IRQ */ + MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x00880 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + /* HW revision detect */ + /* REV_ID0 */ + MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0 + /* REV_ID1 */ + MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x1b0b0 + /* REV_ID2 */ + MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x1b0b0 + /* REV_ID3 */ + MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x1b0b0 + /* BOARD_ID0 */ + MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x1b0b0 + /* BOARD_ID1 */ + MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14 0x1b0b0 + /* BOARD_ID2 */ + MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x1b0b0 + /* BOARD_ID3 */ + MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12 0x1b0b0 + /* Safety controller IO */ + /* WAKE_SC */ + MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x1b0b0 + /* PROGRAM_SC */ + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001b8b0 + MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001b8b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_CSI_VSYNC__I2C2_SDA 0x4001b8b0 + MX6UL_PAD_CSI_HSYNC__I2C2_SCL 0x4001b8b0 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x1b0b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x070b1 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x07099 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x070b1 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x070b1 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x070b1 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x070b1 + /* SD1 CD */ + MX6UL_PAD_NAND_READY_B__GPIO4_IO12 0x170b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9 + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170f9 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170f9 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170f9 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170f9 + MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x170b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 9d3411cc597b..afeec01f6522 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -538,6 +538,7 @@ fsl,num-tx-queues = <1>; fsl,num-rx-queues = <1>; fsl,stop-mode = <&gpr 0x10 4>; + fsl,magic-packet; status = "disabled"; }; @@ -885,6 +886,7 @@ fsl,num-tx-queues = <1>; fsl,num-rx-queues = <1>; fsl,stop-mode = <&gpr 0x10 3>; + fsl,magic-packet; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx7d-flex-concentrator.dts b/arch/arm/boot/dts/imx7d-flex-concentrator.dts index 84b095279e65..bd6b5285aa8d 100644 --- a/arch/arm/boot/dts/imx7d-flex-concentrator.dts +++ b/arch/arm/boot/dts/imx7d-flex-concentrator.dts @@ -115,6 +115,7 @@ compatible = "nxp,pcf2127"; reg = <0>; spi-max-frequency = <2000000>; + reset-source; }; }; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 251007a7b836..a22d41e0cf31 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -151,6 +151,7 @@ timer { compatible = "arm,armv7-timer"; + arm,cpu-registers-not-fw-configured; interrupt-parent = <&intc>; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi index 2d94faf31fab..b8f152e7af7f 100644 --- a/arch/arm/boot/dts/keystone-k2e.dtsi +++ b/arch/arm/boot/dts/keystone-k2e.dtsi @@ -52,7 +52,7 @@ usb: usb@2680000 { interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>; - dwc3@2690000 { + usb@2690000 { interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>; }; }; @@ -78,8 +78,8 @@ dma-ranges; status = "disabled"; - usb1: dwc3@25010000 { - compatible = "synopsys,dwc3"; + usb1: usb@25010000 { + compatible = "snps,dwc3"; reg = <0x25010000 0x70000>; interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>; usb-phy = <&usb1_phy>, <&usb1_phy>; diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index c298675a29a5..fc9fdc857ae8 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -217,8 +217,8 @@ dma-ranges; status = "disabled"; - usb0: dwc3@2690000 { - compatible = "synopsys,dwc3"; + usb0: usb@2690000 { + compatible = "snps,dwc3"; reg = <0x2690000 0x70000>; interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; usb-phy = <&usb_phy>, <&usb_phy>; diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi index 3a5cfb0ddb20..c87066d6c995 100644 --- a/arch/arm/boot/dts/lpc32xx.dtsi +++ b/arch/arm/boot/dts/lpc32xx.dtsi @@ -326,9 +326,6 @@ clocks = <&xtal_32k>, <&xtal>; clock-names = "xtal_32k", "xtal"; - - assigned-clocks = <&clk LPC32XX_CLK_HCLK_PLL>; - assigned-clock-rates = <208000000>; }; }; diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index 7649dd1e0b9e..8bae6ed0abb2 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -11,6 +11,11 @@ #size-cells = <1>; interrupt-parent = <&gic>; + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&saradc 8>; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -195,6 +200,13 @@ #size-cells = <1>; ranges = <0x0 0xc8100000 0x100000>; + ao_arc_rproc: remoteproc@1c { + compatible= "amlogic,meson-mx-ao-arc"; + reg = <0x1c 0x8>, <0x38 0x8>; + reg-names = "remap", "cpu"; + status = "disabled"; + }; + ir_receiver: ir-receiver@480 { compatible= "amlogic,meson6-ir"; reg = <0x480 0x20>; @@ -293,6 +305,13 @@ }; }; + thermal_sensor: thermal-sensor { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&saradc 8>; + io-channel-names = "sensor-channel"; + }; + xtal: xtal-clk { compatible = "fixed-clock"; clock-frequency = <24000000>; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 04688e8abce2..157a950a55d3 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/power/meson8-power.h> #include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h> #include <dt-bindings/reset/amlogic,meson8b-reset.h> +#include <dt-bindings/thermal/thermal.h> #include "meson.dtsi" / { @@ -28,6 +29,7 @@ resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>; operating-points-v2 = <&cpu_opp_table>; clocks = <&clkc CLKID_CPUCLK>; + #cooling-cells = <2>; /* min followed by max */ }; cpu1: cpu@201 { @@ -39,6 +41,7 @@ resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>; operating-points-v2 = <&cpu_opp_table>; clocks = <&clkc CLKID_CPUCLK>; + #cooling-cells = <2>; /* min followed by max */ }; cpu2: cpu@202 { @@ -50,6 +53,7 @@ resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>; operating-points-v2 = <&cpu_opp_table>; clocks = <&clkc CLKID_CPUCLK>; + #cooling-cells = <2>; /* min followed by max */ }; cpu3: cpu@203 { @@ -61,6 +65,7 @@ resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>; operating-points-v2 = <&cpu_opp_table>; clocks = <&clkc CLKID_CPUCLK>; + #cooling-cells = <2>; /* min followed by max */ }; }; @@ -190,6 +195,54 @@ }; }; + thermal-zones { + soc { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + thermal-sensors = <&thermal_sensor>; + + cooling-maps { + map0 { + trip = <&soc_passive>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&soc_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + soc_passive: soc-passive { + temperature = <80000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + soc_hot: soc-hot { + temperature = <90000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "hot"; + }; + + soc_critical: soc-critical { + temperature = <110000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + }; + }; + mmcbus: bus@c8000000 { compatible = "simple-bus"; reg = <0xc8000000 0x8000>; @@ -254,6 +307,7 @@ clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; clock-names = "bus", "core"; operating-points-v2 = <&gpu_opp_table>; + #cooling-cells = <2>; /* min followed by max */ }; }; }; /* end of / */ @@ -315,6 +369,14 @@ }; }; +&ao_arc_rproc { + compatible= "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc"; + amlogic,secbus2 = <&secbus2>; + sram = <&ao_arc_sram>; + resets = <&reset RESET_MEDIA_CPU>; + clocks = <&clkc CLKID_AO_MEDIA_CPU>; +}; + &cbus { reset: reset-controller@4404 { compatible = "amlogic,meson8b-reset"; @@ -442,6 +504,12 @@ }; &ahb_sram { + ao_arc_sram: ao-arc-sram@0 { + compatible = "amlogic,meson8-ao-arc-sram"; + reg = <0x0 0x8000>; + pool; + }; + smp-sram@1ff80 { compatible = "amlogic,meson8-smp-sram"; reg = <0x1ff80 0x8>; @@ -577,6 +645,13 @@ clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk"; }; +&secbus { + secbus2: system-controller@4000 { + compatible = "amlogic,meson8-secbus2", "syscon"; + reg = <0x4000 0x2000>; + }; +}; + &sdio { compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio"; clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>; diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts index ed06102a4014..8e48ccc6b634 100644 --- a/arch/arm/boot/dts/meson8b-ec100.dts +++ b/arch/arm/boot/dts/meson8b-ec100.dts @@ -70,11 +70,6 @@ timeout-ms = <20000>; }; - iio-hwmon { - compatible = "iio-hwmon"; - io-channels = <&saradc 8>; - }; - leds { compatible = "gpio-leds"; diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/meson8b-mxq.dts index 33037ef62d0a..f3937d55472d 100644 --- a/arch/arm/boot/dts/meson8b-mxq.dts +++ b/arch/arm/boot/dts/meson8b-mxq.dts @@ -27,11 +27,6 @@ reg = <0x40000000 0x40000000>; }; - iio-hwmon { - compatible = "iio-hwmon"; - io-channels = <&saradc 8>; - }; - vcck: regulator-vcck { compatible = "pwm-regulator"; diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts index 5963566dbcc9..c440ef94e082 100644 --- a/arch/arm/boot/dts/meson8b-odroidc1.dts +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -85,11 +85,6 @@ 1800000 1>; }; - iio-hwmon { - compatible = "iio-hwmon"; - io-channels = <&saradc 8>; - }; - rtc32k_xtal: rtc32k-xtal-clk { /* X3 in the schematics */ compatible = "fixed-clock"; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index 2401cdf5f751..c02b03cbcdf4 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -10,6 +10,7 @@ #include <dt-bindings/power/meson8-power.h> #include <dt-bindings/reset/amlogic,meson8b-reset.h> #include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h> +#include <dt-bindings/thermal/thermal.h> #include "meson.dtsi" / { @@ -26,6 +27,7 @@ resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>; operating-points-v2 = <&cpu_opp_table>; clocks = <&clkc CLKID_CPUCLK>; + #cooling-cells = <2>; /* min followed by max */ }; cpu1: cpu@201 { @@ -37,6 +39,7 @@ resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>; operating-points-v2 = <&cpu_opp_table>; clocks = <&clkc CLKID_CPUCLK>; + #cooling-cells = <2>; /* min followed by max */ }; cpu2: cpu@202 { @@ -48,6 +51,7 @@ resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>; operating-points-v2 = <&cpu_opp_table>; clocks = <&clkc CLKID_CPUCLK>; + #cooling-cells = <2>; /* min followed by max */ }; cpu3: cpu@203 { @@ -59,6 +63,7 @@ resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>; operating-points-v2 = <&cpu_opp_table>; clocks = <&clkc CLKID_CPUCLK>; + #cooling-cells = <2>; /* min followed by max */ }; }; @@ -167,6 +172,54 @@ }; }; + thermal-zones { + soc { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + thermal-sensors = <&thermal_sensor>; + + cooling-maps { + map0 { + trip = <&soc_passive>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&soc_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + soc_passive: soc-passive { + temperature = <80000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + soc_hot: soc-hot { + temperature = <90000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "hot"; + }; + + soc_critical: soc-critical { + temperature = <110000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + }; + }; + mmcbus: bus@c8000000 { compatible = "simple-bus"; reg = <0xc8000000 0x8000>; @@ -221,6 +274,7 @@ clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; clock-names = "bus", "core"; operating-points-v2 = <&gpu_opp_table>; + #cooling-cells = <2>; /* min followed by max */ }; }; }; /* end of / */ @@ -266,6 +320,14 @@ }; }; +&ao_arc_rproc { + compatible= "amlogic,meson8b-ao-arc", "amlogic,meson-mx-ao-arc"; + amlogic,secbus2 = <&secbus2>; + sram = <&ao_arc_sram>; + resets = <&reset RESET_MEDIA_CPU>; + clocks = <&clkc CLKID_AO_MEDIA_CPU>; +}; + &cbus { reset: reset-controller@4404 { compatible = "amlogic,meson8b-reset"; @@ -410,6 +472,12 @@ }; &ahb_sram { + ao_arc_sram: ao-arc-sram@0 { + compatible = "amlogic,meson8b-ao-arc-sram"; + reg = <0x0 0x8000>; + pool; + }; + smp-sram@1ff80 { compatible = "amlogic,meson8b-smp-sram"; reg = <0x1ff80 0x8>; @@ -574,6 +642,13 @@ clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk"; }; +&secbus { + secbus2: system-controller@4000 { + compatible = "amlogic,meson8b-secbus2", "syscon"; + reg = <0x4000 0x2000>; + }; +}; + &sdio { compatible = "amlogic,meson8b-sdio", "amlogic,meson-mx-sdio"; clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>; diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts index 8f4eb1ed4581..fa6d55f1cfb9 100644 --- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts +++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts @@ -45,11 +45,6 @@ }; }; - iio-hwmon { - compatible = "iio-hwmon"; - io-channels = <&saradc 8>; - }; - vcc_3v3: regulator-vcc3v3 { compatible = "regulator-fixed"; regulator-name = "VCC3V3"; diff --git a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts index 342304f5653a..55ea87870af3 100644 --- a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts +++ b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts @@ -2,7 +2,7 @@ /* * OLPC XO 1.75 Laptop. * - * Copyright (C) 2018,2019 Lubomir Rintel <lkundrak@v3.sk> + * Copyright (C) 2018,2019,2020 Lubomir Rintel <lkundrak@v3.sk> */ /dts-v1/; @@ -10,6 +10,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/clock/marvell,mmp2-audio.h> / { model = "OLPC XO-1.75"; @@ -32,8 +33,7 @@ }; }; - memory { - linux,usable-memory = <0x0 0x1f800000>; + memory@0 { available = <0xcf000 0x1ef31000 0x1000 0xbf000>; reg = <0x0 0x20000000>; device_type = "memory"; @@ -195,7 +195,7 @@ port { rt5631_0: endpoint { mclk-fs = <256>; - clocks = <&audio_clk 0>; + clocks = <&audio_clk MMP2_CLK_AUDIO_SYSCLK>; remote-endpoint = <&sspa0_0>; }; }; diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi index 445bdcd50b9e..46984d4c5224 100644 --- a/arch/arm/boot/dts/mmp2.dtsi +++ b/arch/arm/boot/dts/mmp2.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/clock/marvell,mmp2.h> #include <dt-bindings/power/marvell,mmp2.h> +#include <dt-bindings/clock/marvell,mmp2-audio.h> / { #address-cells = <1>; @@ -243,7 +244,7 @@ interrupts = <2>; clock-names = "audio", "bitclk"; clocks = <&soc_clocks MMP2_CLK_AUDIO>, - <&audio_clk 1>; + <&audio_clk MMP2_CLK_AUDIO_SSPA0>; power-domains = <&soc_clocks MMP2_POWER_DOMAIN_AUDIO>; #sound-dai-cells = <0>; status = "disabled"; @@ -256,7 +257,7 @@ interrupts = <3>; clock-names = "audio", "bitclk"; clocks = <&soc_clocks MMP2_CLK_AUDIO>, - <&audio_clk 2>; + <&audio_clk MMP2_CLK_AUDIO_SSPA1>; power-domains = <&soc_clocks MMP2_POWER_DOMAIN_AUDIO>; #sound-dai-cells = <0>; status = "disabled"; diff --git a/arch/arm/boot/dts/mmp3-dell-ariel.dts b/arch/arm/boot/dts/mmp3-dell-ariel.dts index fe3b1cd695ee..fe6df364a9eb 100644 --- a/arch/arm/boot/dts/mmp3-dell-ariel.dts +++ b/arch/arm/boot/dts/mmp3-dell-ariel.dts @@ -26,11 +26,21 @@ }; memory@0 { - linux,usable-memory = <0x0 0x7f600000>; available = <0x7f700000 0x7ff00000 0x00000000 0x7f600000>; reg = <0x0 0x80000000>; device_type = "memory"; }; + + ec_input_spi: spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + num-chipselects = <0>; + sck-gpios = <&gpio 55 GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio 57 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>; + }; }; &uart3 { @@ -96,6 +106,15 @@ &twsi4 { status = "okay"; + + embedded-controller@58 { + compatible = "dell,wyse-ariel-ec", "ene,kb3930"; + reg = <0x58>; + system-power-controller; + + off-gpios = <&gpio 126 GPIO_ACTIVE_HIGH>, + <&gpio 127 GPIO_ACTIVE_HIGH>; + }; }; &ssp1 { @@ -110,9 +129,17 @@ }; }; -&ssp2 { - cs-gpios = <&gpio 56 GPIO_ACTIVE_LOW>; +&ec_input_spi { status = "okay"; + cs-gpios = <&gpio 56 GPIO_ACTIVE_LOW>; + + power-button@0 { + reg = <0>; + interrupt-parent = <&gpio>; + interrupts = <60 IRQ_TYPE_EDGE_RISING>; + compatible = "dell,wyse-ariel-ec-input", "ene,kb3930-input"; + spi-max-frequency = <33000000>; + }; }; &gpu_2d { diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi index 4ae630d37d09..a4fb9203ec1f 100644 --- a/arch/arm/boot/dts/mmp3.dtsi +++ b/arch/arm/boot/dts/mmp3.dtsi @@ -293,7 +293,8 @@ camera0: camera@d420a000 { compatible = "marvell,mmp2-ccic"; reg = <0xd420a000 0x800>; - interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <1>; + interrupt-parent = <&ci_mux>; clocks = <&soc_clocks MMP2_CLK_CCIC0>; clock-names = "axi"; power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>; @@ -305,7 +306,8 @@ camera1: camera@d420a800 { compatible = "marvell,mmp2-ccic"; reg = <0xd420a800 0x800>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <2>; + interrupt-parent = <&ci_mux>; clocks = <&soc_clocks MMP2_CLK_CCIC1>; clock-names = "axi"; power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>; @@ -567,7 +569,7 @@ soc_clocks: clocks@d4050000 { compatible = "marvell,mmp3-clock"; - reg = <0xd4050000 0x1000>, + reg = <0xd4050000 0x2000>, <0xd4282800 0x400>, <0xd4015000 0x1000>; reg-names = "mpmu", "apmu", "apbc"; diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi index f75806d0cd47..a4423ff0df39 100644 --- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi +++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi @@ -169,6 +169,29 @@ }; }; +&cpu_thermal { + polling-delay = <10000>; /* milliseconds */ +}; + +&cpu_alert0 { + temperature = <80000>; /* millicelsius */ +}; + +&cpu0 { + /* + * Note that the 1.2GiHz mode is enabled for all SoC variants for + * the Motorola Android Linux v3.0.8 based kernel. + */ + operating-points = < + /* kHz uV */ + 300000 1025000 + 600000 1200000 + 800000 1313000 + 1008000 1375000 + 1200000 1375000 + >; +}; + &dss { status = "okay"; }; diff --git a/arch/arm/boot/dts/mstar-infinity-breadbee-common.dtsi b/arch/arm/boot/dts/mstar-infinity-breadbee-common.dtsi new file mode 100644 index 000000000000..507ff2fba837 --- /dev/null +++ b/arch/arm/boot/dts/mstar-infinity-breadbee-common.dtsi @@ -0,0 +1,49 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020 thingy.jp. + * Author: Daniel Palmer <daniel@thingy.jp> + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + vcc_core: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vcc_core"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + }; + + vcc_dram: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "vcc_dram"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + vcc_io: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + leds { + compatible = "gpio-leds"; + red { + gpios = <&gpio MSC313_GPIO_SR_IO16 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "activity"; + }; + yellow { + gpios = <&gpio MSC313_GPIO_SR_IO17 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&cpu0 { + cpu-supply = <&vcc_core>; +}; diff --git a/arch/arm/boot/dts/mstar-infinity-msc313-breadbee_crust.dts b/arch/arm/boot/dts/mstar-infinity-msc313-breadbee_crust.dts index f9db2ff86f2d..db4910dcb8a7 100644 --- a/arch/arm/boot/dts/mstar-infinity-msc313-breadbee_crust.dts +++ b/arch/arm/boot/dts/mstar-infinity-msc313-breadbee_crust.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "mstar-infinity-msc313.dtsi" +#include "mstar-infinity-breadbee-common.dtsi" / { model = "BreadBee Crust"; diff --git a/arch/arm/boot/dts/mstar-infinity3-msc313e-breadbee.dts b/arch/arm/boot/dts/mstar-infinity3-msc313e-breadbee.dts index f0eda80a95cc..e64ca4ce1830 100644 --- a/arch/arm/boot/dts/mstar-infinity3-msc313e-breadbee.dts +++ b/arch/arm/boot/dts/mstar-infinity3-msc313e-breadbee.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "mstar-infinity3-msc313e.dtsi" +#include "mstar-infinity-breadbee-common.dtsi" / { model = "BreadBee"; diff --git a/arch/arm/boot/dts/omap3-echo.dts b/arch/arm/boot/dts/omap3-echo.dts index 93ffeddada1e..b9fd113979f2 100644 --- a/arch/arm/boot/dts/omap3-echo.dts +++ b/arch/arm/boot/dts/omap3-echo.dts @@ -86,6 +86,38 @@ linux,axis = <REL_X>; rotary-encoder,relative-axis; }; + + speaker_amp: speaker-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* gpio_129 */ + sound-name-prefix = "Speaker Amp"; + VCC-supply = <&vcc1v8>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "Misto Speaker"; + simple-audio-card,widgets = + "Speaker", "Speaker"; + simple-audio-card,routing = + "Speaker Amp INL", "HPL", + "Speaker Amp INR", "HPR", + "Speaker", "Speaker Amp OUTL", + "Speaker", "Speaker Amp OUTR"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + simple-audio-card,aux-devs = <&speaker_amp>; + + simple-audio-card,cpu { + sound-dai = <&mcbsp2>; + }; + + sound_master: simple-audio-card,codec { + sound-dai = <&codec0>; + system-clock-frequency = <19200000>; + }; + }; }; &i2c1 { @@ -96,6 +128,13 @@ }; }; +&mcbsp2 { + status = "okay"; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp2_pins>; +}; + &i2c2 { clock-frequency = <400000>; @@ -277,6 +316,22 @@ }; }; +&i2c3 { + clock-frequency = <400000>; + + codec0: codec@18 { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic32x4"; + reg = <0x18>; + clocks = <&sys_clkout1>; + clock-names = "mclk"; + ldoin-supply = <&vcc1v8>; + iov-supply = <&vcc1v8>; + reset-gpios = <&gpio3 10 GPIO_ACTIVE_LOW>; /* gpio_74 */ + }; +}; + + #include "tps65910.dtsi" &omap3_pmx_core { @@ -290,6 +345,9 @@ pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20dc, PIN_INPUT | MUX_MODE4) /* dss_data0.gpio_70 */ OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4) /* dss_data2.gpio_72 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4) /* dss_data4.gpio_74 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* dss_data15.gpio_85 */ + OMAP3_CORE1_IOPAD(0x2a1a, PIN_OUTPUT | MUX_MODE0) /* sys_clkout1.sys_clkout1 */ >; }; @@ -318,6 +376,15 @@ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7.sdmmc2_dat7 */ >; }; + + mcbsp2_pins: pinmux_mcbsp2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */ + OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx.mcbsp2_clkx */ + OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2.dr */ + OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx.mcbsp2_dx */ + >; + }; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index c8745bc800f7..938cc691bb2f 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -114,7 +114,7 @@ gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>; gpio-miso = <&gpio1 18 GPIO_ACTIVE_HIGH>; gpio-mosi = <&gpio1 20 GPIO_ACTIVE_HIGH>; - cs-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; num-chipselects = <1>; /* lcd panel */ @@ -124,7 +124,6 @@ spi-max-frequency = <100000>; spi-cpol; spi-cpha; - spi-cs-high; backlight= <&backlight>; label = "lcd"; @@ -489,8 +488,8 @@ }; twl_power: power { - compatible = "ti,twl4030-power"; - ti,use_poweroff; + compatible = "ti,twl4030-power-idle"; + ti,system-power-controller; }; }; }; diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index 5de2be9bbe6f..99f5585097a1 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -2,7 +2,7 @@ /* * Common device tree for IGEP boards based on AM/DM37x * - * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com> + * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org> * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi index af8aa5f0feb7..73d8f471b9ec 100644 --- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi @@ -2,7 +2,7 @@ /* * Common Device Tree Source for IGEPv2 * - * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com> + * Copyright (C) 2014 Javier Martinez Canillas <javier@dowhile0.org> * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com> */ diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts index 567232584f08..9dca5bfc87ab 100644 --- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts +++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts @@ -2,7 +2,7 @@ /* * Device Tree Source for IGEPv2 Rev. F (TI OMAP AM/DM37x) * - * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com> + * Copyright (C) Javier Martinez Canillas <javier@dowhile0.org> * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> */ diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index e341535a7162..c6f863bc03ad 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -2,7 +2,7 @@ /* * Device Tree Source for IGEPv2 Rev. C (TI OMAP AM/DM37x) * - * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com> + * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org> * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> */ diff --git a/arch/arm/boot/dts/omap3-igep0030-common.dtsi b/arch/arm/boot/dts/omap3-igep0030-common.dtsi index 71b0ae807ecd..742e3e147063 100644 --- a/arch/arm/boot/dts/omap3-igep0030-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0030-common.dtsi @@ -2,7 +2,7 @@ /* * Common Device Tree Source for IGEP COM MODULE * - * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com> + * Copyright (C) 2014 Javier Martinez Canillas <javier@dowhile0.org> * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com> */ diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts index df6ba1219830..8e9c12cf51a7 100644 --- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts +++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts @@ -2,7 +2,7 @@ /* * Device Tree Source for IGEP COM MODULE Rev. G (TI OMAP AM/DM37x) * - * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com> + * Copyright (C) 2014 Javier Martinez Canillas <javier@dowhile0.org> * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com> */ diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index 32f31035daa2..5188f96f431e 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -2,7 +2,7 @@ /* * Device Tree Source for IGEP COM MODULE Rev. E (TI OMAP AM/DM37x) * - * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com> + * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org> * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> */ diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index 11d41e86f814..7dde9fbb06d3 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -494,3 +494,11 @@ clock-names = "sysclk"; }; }; + +&aes1_target { + status = "disabled"; +}; + +&aes2_target { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index 05fe5ed127b0..20844dbc002e 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -72,7 +72,6 @@ <1375000 1375000 1375000>; /* only on am/dm37x with speed-binned bit set */ opp-supported-hw = <0xffffffff 2>; - turbo-mode; }; }; diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index 3ea4c5b9fd31..e833c21f1c01 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -16,8 +16,13 @@ debounce-interval = <10>; }; + /* + * We use pad 0x4a100116 abe_dmic_din3.gpio_122 as the irq instead + * of the gpio interrupt to avoid lost events in deeper idle states. + */ slider { label = "Keypad Slide"; + interrupts-extended = <&omap4_pmx_core 0xd6>; gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */ linux,input-type = <EV_SW>; linux,code = <SW_KEYPAD_SLIDE>; diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi index cb309743de5d..8466161197ae 100644 --- a/arch/arm/boot/dts/omap443x.dtsi +++ b/arch/arm/boot/dts/omap443x.dtsi @@ -33,10 +33,12 @@ }; ocp { + /* 4430 has only gpio_86 tshut and no talert interrupt */ bandgap: bandgap@4a002260 { reg = <0x4a002260 0x4 0x4a00232C 0x4>; compatible = "ti,omap4430-bandgap"; + gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; #thermal-sensor-cells = <0>; }; @@ -76,11 +78,11 @@ /include/ "omap443x-clocks.dtsi" /* - * Use dpll_per for sgx at 153.6MHz like droid4 stock v3.0.8 Android kernel + * Use dpll_per for sgx at 307.2MHz like droid4 stock v3.0.8 Android kernel */ &sgx_module { assigned-clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 24>, <&dpll_per_m7x2_ck>; - assigned-clock-rates = <0>, <153600000>; + assigned-clock-rates = <0>, <307200000>; assigned-clock-parents = <&dpll_per_m7x2_ck>; }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 5f1a8bd13880..e025b7c9a357 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -518,6 +518,9 @@ clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>; clock-names = "fck", "sys_clk"; + + #address-cells = <1>; + #size-cells = <0>; }; }; @@ -550,6 +553,9 @@ clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>; clock-names = "fck", "sys_clk"; + + #address-cells = <1>; + #size-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/owl-s500-cubieboard6.dts b/arch/arm/boot/dts/owl-s500-cubieboard6.dts index 7c96c59b610d..c2b02895910c 100644 --- a/arch/arm/boot/dts/owl-s500-cubieboard6.dts +++ b/arch/arm/boot/dts/owl-s500-cubieboard6.dts @@ -25,12 +25,6 @@ device_type = "memory"; reg = <0x0 0x80000000>; }; - - uart3_clk: uart3-clk { - compatible = "fixed-clock"; - clock-frequency = <921600>; - #clock-cells = <0>; - }; }; &timer { @@ -39,5 +33,4 @@ &uart3 { status = "okay"; - clocks = <&uart3_clk>; }; diff --git a/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts b/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts index e610d49395d2..7ae34a23e320 100644 --- a/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts +++ b/arch/arm/boot/dts/owl-s500-guitar-bb-rev-b.dts @@ -18,15 +18,8 @@ chosen { stdout-path = "serial3:115200n8"; }; - - uart3_clk: uart3-clk { - compatible = "fixed-clock"; - clock-frequency = <921600>; - #clock-cells = <0>; - }; }; &uart3 { status = "okay"; - clocks = <&uart3_clk>; }; diff --git a/arch/arm/boot/dts/owl-s500-labrador-base-m.dts b/arch/arm/boot/dts/owl-s500-labrador-base-m.dts index c92f8bdcb331..1585e33f703b 100644 --- a/arch/arm/boot/dts/owl-s500-labrador-base-m.dts +++ b/arch/arm/boot/dts/owl-s500-labrador-base-m.dts @@ -21,15 +21,8 @@ chosen { stdout-path = "serial3:115200n8"; }; - - uart3_clk: uart3-clk { - compatible = "fixed-clock"; - clock-frequency = <921600>; - #clock-cells = <0>; - }; }; &uart3 { status = "okay"; - clocks = <&uart3_clk>; }; diff --git a/arch/arm/boot/dts/owl-s500-roseapplepi.dts b/arch/arm/boot/dts/owl-s500-roseapplepi.dts index a2087e617cb2..ff91561ca99c 100644 --- a/arch/arm/boot/dts/owl-s500-roseapplepi.dts +++ b/arch/arm/boot/dts/owl-s500-roseapplepi.dts @@ -14,6 +14,7 @@ model = "Roseapple Pi"; aliases { + mmc0 = &mmc0; serial2 = &uart2; }; @@ -26,13 +27,100 @@ reg = <0x0 0x80000000>; /* 2GB */ }; - uart2_clk: uart2-clk { - compatible = "fixed-clock"; - clock-frequency = <921600>; - #clock-cells = <0>; + /* Fixed regulator used in the absence of PMIC */ + sd_vcc: sd-vcc { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.1V"; + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-always-on; }; }; +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; +}; + +&i2c1 { + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; +}; + +&i2c2 { + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; +}; + +&pinctrl { + i2c0_pins: i2c0-pins { + pinmux { + groups = "i2c0_mfp"; + function = "i2c0"; + }; + + pinconf { + pins = "i2c0_sclk", "i2c0_sdata"; + bias-pull-up; + }; + }; + + i2c1_pins: i2c1-pins { + pinconf { + pins = "i2c1_sclk", "i2c1_sdata"; + bias-pull-up; + }; + }; + + i2c2_pins: i2c2-pins { + pinconf { + pins = "i2c2_sclk", "i2c2_sdata"; + bias-pull-up; + }; + }; + + mmc0_pins: mmc0-pins { + pinmux { + groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp", + "sd0_cmd_mfp", "sd0_clk_mfp"; + function = "sd0"; + }; + + drv-pinconf { + groups = "sd0_d0_d3_drv", "sd0_cmd_drv", "sd0_clk_drv"; + drive-strength = <8>; + }; + + bias0-pinconf { + pins = "sd0_d0", "sd0_d1", "sd0_d2", + "sd0_d3", "sd0_cmd"; + bias-pull-up; + }; + + bias1-pinconf { + pins = "sd0_clk"; + bias-pull-down; + }; + }; +}; + +/* uSD */ +&mmc0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + no-sdio; + no-mmc; + no-1-8-v; + cd-gpios = <&pinctrl 117 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <&sd_vcc>; + vqmmc-supply = <&sd_vcc>; +}; + &twd_timer { status = "okay"; }; @@ -43,5 +131,4 @@ &uart2 { status = "okay"; - clocks = <&uart2_clk>; }; diff --git a/arch/arm/boot/dts/owl-s500-sparky.dts b/arch/arm/boot/dts/owl-s500-sparky.dts index c665ce8b88b4..9d8f7336bec0 100644 --- a/arch/arm/boot/dts/owl-s500-sparky.dts +++ b/arch/arm/boot/dts/owl-s500-sparky.dts @@ -25,12 +25,6 @@ device_type = "memory"; reg = <0x0 0x40000000>; /* 1 or 2 GiB */ }; - - uart3_clk: uart3-clk { - compatible = "fixed-clock"; - clock-frequency = <921600>; - #clock-cells = <0>; - }; }; &timer { @@ -39,5 +33,4 @@ &uart3 { status = "okay"; - clocks = <&uart3_clk>; }; diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/owl-s500.dtsi index 1dbe4e8b38ac..cd635f222d26 100644 --- a/arch/arm/boot/dts/owl-s500.dtsi +++ b/arch/arm/boot/dts/owl-s500.dtsi @@ -5,8 +5,11 @@ * Copyright (c) 2016-2017 Andreas Färber */ +#include <dt-bindings/clock/actions,s500-cmu.h> +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/owl-s500-powergate.h> +#include <dt-bindings/reset/actions,s500-reset.h> / { compatible = "actions,s500"; @@ -70,6 +73,12 @@ #clock-cells = <0>; }; + losc: losc { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -124,6 +133,7 @@ compatible = "actions,s500-uart", "actions,owl-uart"; reg = <0xb0120000 0x2000>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_UART0>; status = "disabled"; }; @@ -131,6 +141,7 @@ compatible = "actions,s500-uart", "actions,owl-uart"; reg = <0xb0122000 0x2000>; interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_UART1>; status = "disabled"; }; @@ -138,6 +149,7 @@ compatible = "actions,s500-uart", "actions,owl-uart"; reg = <0xb0124000 0x2000>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_UART2>; status = "disabled"; }; @@ -145,6 +157,7 @@ compatible = "actions,s500-uart", "actions,owl-uart"; reg = <0xb0126000 0x2000>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_UART3>; status = "disabled"; }; @@ -152,6 +165,7 @@ compatible = "actions,s500-uart", "actions,owl-uart"; reg = <0xb0128000 0x2000>; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_UART4>; status = "disabled"; }; @@ -159,6 +173,7 @@ compatible = "actions,s500-uart", "actions,owl-uart"; reg = <0xb012a000 0x2000>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_UART5>; status = "disabled"; }; @@ -166,9 +181,68 @@ compatible = "actions,s500-uart", "actions,owl-uart"; reg = <0xb012c000 0x2000>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_UART6>; + status = "disabled"; + }; + + cmu: clock-controller@b0160000 { + compatible = "actions,s500-cmu"; + reg = <0xb0160000 0x8000>; + clocks = <&hosc>, <&losc>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + i2c0: i2c@b0170000 { + compatible = "actions,s500-i2c"; + reg = <0xb0170000 0x4000>; + clocks = <&cmu CLK_I2C0>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@b0174000 { + compatible = "actions,s500-i2c"; + reg = <0xb0174000 0x4000>; + clocks = <&cmu CLK_I2C1>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@b0178000 { + compatible = "actions,s500-i2c"; + reg = <0xb0178000 0x4000>; + clocks = <&cmu CLK_I2C2>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@b017c000 { + compatible = "actions,s500-i2c"; + reg = <0xb017c000 0x4000>; + clocks = <&cmu CLK_I2C3>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; + sirq: interrupt-controller@b01b0200 { + compatible = "actions,s500-sirq"; + reg = <0xb01b0200 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ0 */ + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ1 */ + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; /* SIRQ2 */ + }; + timer: timer@b0168000 { compatible = "actions,s500-timer"; reg = <0xb0168000 0x8000>; @@ -184,5 +258,71 @@ reg = <0xb01b0100 0x100>; #power-domain-cells = <1>; }; + + pinctrl: pinctrl@b01b0000 { + compatible = "actions,s500-pinctrl"; + reg = <0xb01b0000 0x40>, /* GPIO */ + <0xb01b0040 0x10>, /* Multiplexing Control */ + <0xb01b0060 0x18>, /* PAD Control */ + <0xb01b0080 0xc>; /* PAD Drive Capacity */ + clocks = <&cmu CLK_GPIO>; + gpio-controller; + gpio-ranges = <&pinctrl 0 0 132>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, /* GPIOA */ + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, /* GPIOB */ + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, /* GPIOC */ + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, /* GPIOD */ + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; /* GPIOE */ + }; + + dma: dma-controller@b0260000 { + compatible = "actions,s500-dma"; + reg = <0xb0260000 0xd00>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + dma-channels = <12>; + dma-requests = <46>; + clocks = <&cmu CLK_DMAC>; + power-domains = <&sps S500_PD_DMA>; + }; + + mmc0: mmc@b0230000 { + compatible = "actions,s500-mmc", "actions,owl-mmc"; + reg = <0xb0230000 0x38>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_SD0>; + resets = <&cmu RESET_SD0>; + dmas = <&dma 2>; + dma-names = "mmc"; + status = "disabled"; + }; + + mmc1: mmc@b0234000 { + compatible = "actions,s500-mmc", "actions,owl-mmc"; + reg = <0xb0234000 0x38>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_SD1>; + resets = <&cmu RESET_SD1>; + dmas = <&dma 3>; + dma-names = "mmc"; + status = "disabled"; + }; + + mmc2: mmc@b0238000 { + compatible = "actions,s500-mmc", "actions,owl-mmc"; + reg = <0xb0238000 0x38>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_SD2>; + resets = <&cmu RESET_SD2>; + dmas = <&dma 4>; + dma-names = "mmc"; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi deleted file mode 100644 index c4c6c7e9e37b..000000000000 --- a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi +++ /dev/null @@ -1,239 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2011 Picochip, Jamie Iles - */ -/ { - model = "Picochip picoXcell PC3X2"; - compatible = "picochip,pc3x2"; - #address-cells = <1>; - #size-cells = <1>; - - cpus { - #address-cells = <0>; - #size-cells = <0>; - - cpu { - compatible = "arm,arm1176jz-s"; - device_type = "cpu"; - clock-frequency = <400000000>; - d-cache-line-size = <32>; - d-cache-size = <32768>; - i-cache-line-size = <32>; - i-cache-size = <32768>; - }; - }; - - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - pclk: clock@0 { - compatible = "fixed-clock"; - clock-outputs = "bus", "pclk"; - clock-frequency = <200000000>; - ref-clock = <&ref_clk>, "ref"; - }; - }; - - paxi { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x80000000 0x400000>; - - emac: gem@30000 { - compatible = "cadence,gem"; - reg = <0x30000 0x10000>; - interrupts = <31>; - }; - - dmac1: dmac@40000 { - compatible = "snps,dw-dmac"; - reg = <0x40000 0x10000>; - interrupts = <25>; - }; - - dmac2: dmac@50000 { - compatible = "snps,dw-dmac"; - reg = <0x50000 0x10000>; - interrupts = <26>; - }; - - vic0: interrupt-controller@60000 { - compatible = "arm,pl192-vic"; - interrupt-controller; - reg = <0x60000 0x1000>; - #interrupt-cells = <1>; - }; - - vic1: interrupt-controller@64000 { - compatible = "arm,pl192-vic"; - interrupt-controller; - reg = <0x64000 0x1000>; - #interrupt-cells = <1>; - }; - - fuse: picoxcell-fuse@80000 { - compatible = "picoxcell,fuse-pc3x2"; - reg = <0x80000 0x10000>; - }; - - ssi: picoxcell-spi@90000 { - compatible = "picoxcell,spi"; - reg = <0x90000 0x10000>; - interrupt-parent = <&vic0>; - interrupts = <10>; - }; - - ipsec: spacc@100000 { - compatible = "picochip,spacc-ipsec"; - reg = <0x100000 0x10000>; - interrupt-parent = <&vic0>; - interrupts = <24>; - ref-clock = <&pclk>, "ref"; - }; - - srtp: spacc@140000 { - compatible = "picochip,spacc-srtp"; - reg = <0x140000 0x10000>; - interrupt-parent = <&vic0>; - interrupts = <23>; - }; - - l2_engine: spacc@180000 { - compatible = "picochip,spacc-l2"; - reg = <0x180000 0x10000>; - interrupt-parent = <&vic0>; - interrupts = <22>; - ref-clock = <&pclk>, "ref"; - }; - - apb { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x200000 0x80000>; - - rtc0: rtc@0 { - compatible = "picochip,pc3x2-rtc"; - clock-freq = <200000000>; - reg = <0x00000 0xf>; - interrupt-parent = <&vic1>; - interrupts = <8>; - }; - - timer0: timer@10000 { - compatible = "picochip,pc3x2-timer"; - interrupt-parent = <&vic0>; - interrupts = <4>; - clock-freq = <200000000>; - reg = <0x10000 0x14>; - }; - - timer1: timer@10014 { - compatible = "picochip,pc3x2-timer"; - interrupt-parent = <&vic0>; - interrupts = <5>; - clock-freq = <200000000>; - reg = <0x10014 0x14>; - }; - - timer2: timer@10028 { - compatible = "picochip,pc3x2-timer"; - interrupt-parent = <&vic0>; - interrupts = <6>; - clock-freq = <200000000>; - reg = <0x10028 0x14>; - }; - - timer3: timer@1003c { - compatible = "picochip,pc3x2-timer"; - interrupt-parent = <&vic0>; - interrupts = <7>; - clock-freq = <200000000>; - reg = <0x1003c 0x14>; - }; - - gpio: gpio@20000 { - compatible = "snps,dw-apb-gpio"; - reg = <0x20000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - - banka: gpio-controller@0 { - compatible = "snps,dw-apb-gpio-bank"; - gpio-controller; - #gpio-cells = <2>; - gpio-generic,nr-gpio = <8>; - - regoffset-dat = <0x50>; - regoffset-set = <0x00>; - regoffset-dirout = <0x04>; - }; - - bankb: gpio-controller@1 { - compatible = "snps,dw-apb-gpio-bank"; - gpio-controller; - #gpio-cells = <2>; - gpio-generic,nr-gpio = <8>; - - regoffset-dat = <0x54>; - regoffset-set = <0x0c>; - regoffset-dirout = <0x10>; - }; - }; - - uart0: uart@30000 { - compatible = "snps,dw-apb-uart"; - reg = <0x30000 0x1000>; - interrupt-parent = <&vic1>; - interrupts = <10>; - clock-frequency = <3686400>; - reg-shift = <2>; - reg-io-width = <4>; - }; - - uart1: uart@40000 { - compatible = "snps,dw-apb-uart"; - reg = <0x40000 0x1000>; - interrupt-parent = <&vic1>; - interrupts = <9>; - clock-frequency = <3686400>; - reg-shift = <2>; - reg-io-width = <4>; - }; - - wdog: watchdog@50000 { - compatible = "snps,dw-apb-wdg"; - reg = <0x50000 0x10000>; - interrupt-parent = <&vic0>; - interrupts = <11>; - bus-clock = <&pclk>, "bus"; - }; - }; - }; - - rwid-axi { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges; - - ebi@50000000 { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0x40000000 0x08000000 - 1 0 0x48000000 0x08000000 - 2 0 0x50000000 0x08000000 - 3 0 0x58000000 0x08000000>; - }; - - axi2pico@c0000000 { - compatible = "picochip,axi2pico-pc3x2"; - reg = <0xc0000000 0x10000>; - interrupts = <13 14 15 16 17 18 19 20 21>; - }; - }; -}; diff --git a/arch/arm/boot/dts/picoxcell-pc3x3.dtsi b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi deleted file mode 100644 index 0e85bb6bd150..000000000000 --- a/arch/arm/boot/dts/picoxcell-pc3x3.dtsi +++ /dev/null @@ -1,355 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2011 Picochip, Jamie Iles - */ -/ { - model = "Picochip picoXcell PC3X3"; - compatible = "picochip,pc3x3"; - #address-cells = <1>; - #size-cells = <1>; - - cpus { - #address-cells = <0>; - #size-cells = <0>; - - cpu { - compatible = "arm,arm1176jz-s"; - device_type = "cpu"; - cpu-clock = <&arm_clk>, "cpu"; - d-cache-line-size = <32>; - d-cache-size = <32768>; - i-cache-line-size = <32>; - i-cache-size = <32768>; - }; - }; - - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - clkgate: clkgate@800a0048 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x800a0048 4>; - compatible = "picochip,pc3x3-clk-gate"; - - tzprot_clk: clock@0 { - compatible = "picochip,pc3x3-gated-clk"; - clock-outputs = "bus"; - picochip,clk-disable-bit = <0>; - clock-frequency = <200000000>; - ref-clock = <&ref_clk>, "ref"; - }; - - spi_clk: clock@1 { - compatible = "picochip,pc3x3-gated-clk"; - clock-outputs = "bus"; - picochip,clk-disable-bit = <1>; - clock-frequency = <200000000>; - ref-clock = <&ref_clk>, "ref"; - }; - - dmac0_clk: clock@2 { - compatible = "picochip,pc3x3-gated-clk"; - clock-outputs = "bus"; - picochip,clk-disable-bit = <2>; - clock-frequency = <200000000>; - ref-clock = <&ref_clk>, "ref"; - }; - - dmac1_clk: clock@3 { - compatible = "picochip,pc3x3-gated-clk"; - clock-outputs = "bus"; - picochip,clk-disable-bit = <3>; - clock-frequency = <200000000>; - ref-clock = <&ref_clk>, "ref"; - }; - - ebi_clk: clock@4 { - compatible = "picochip,pc3x3-gated-clk"; - clock-outputs = "bus"; - picochip,clk-disable-bit = <4>; - clock-frequency = <200000000>; - ref-clock = <&ref_clk>, "ref"; - }; - - ipsec_clk: clock@5 { - compatible = "picochip,pc3x3-gated-clk"; - clock-outputs = "bus"; - picochip,clk-disable-bit = <5>; - clock-frequency = <200000000>; - ref-clock = <&ref_clk>, "ref"; - }; - - l2_clk: clock@6 { - compatible = "picochip,pc3x3-gated-clk"; - clock-outputs = "bus"; - picochip,clk-disable-bit = <6>; - clock-frequency = <200000000>; - ref-clock = <&ref_clk>, "ref"; - }; - - trng_clk: clock@7 { - compatible = "picochip,pc3x3-gated-clk"; - clock-outputs = "bus"; - picochip,clk-disable-bit = <7>; - clock-frequency = <200000000>; - ref-clock = <&ref_clk>, "ref"; - }; - - fuse_clk: clock@8 { - compatible = "picochip,pc3x3-gated-clk"; - clock-outputs = "bus"; - picochip,clk-disable-bit = <8>; - clock-frequency = <200000000>; - ref-clock = <&ref_clk>, "ref"; - }; - - otp_clk: clock@9 { - compatible = "picochip,pc3x3-gated-clk"; - clock-outputs = "bus"; - picochip,clk-disable-bit = <9>; - clock-frequency = <200000000>; - ref-clock = <&ref_clk>, "ref"; - }; - }; - - arm_clk: clock@11 { - compatible = "picochip,pc3x3-pll"; - reg = <0x800a0050 0x8>; - picochip,min-freq = <140000000>; - picochip,max-freq = <700000000>; - ref-clock = <&ref_clk>, "ref"; - clock-outputs = "cpu"; - }; - - pclk: clock@12 { - compatible = "fixed-clock"; - clock-outputs = "bus", "pclk"; - clock-frequency = <200000000>; - ref-clock = <&ref_clk>, "ref"; - }; - }; - - paxi { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x80000000 0x400000>; - - emac: gem@30000 { - compatible = "cadence,gem"; - reg = <0x30000 0x10000>; - interrupt-parent = <&vic0>; - interrupts = <31>; - }; - - dmac1: dmac@40000 { - compatible = "snps,dw-dmac"; - reg = <0x40000 0x10000>; - interrupt-parent = <&vic0>; - interrupts = <25>; - }; - - dmac2: dmac@50000 { - compatible = "snps,dw-dmac"; - reg = <0x50000 0x10000>; - interrupt-parent = <&vic0>; - interrupts = <26>; - }; - - vic0: interrupt-controller@60000 { - compatible = "arm,pl192-vic"; - interrupt-controller; - reg = <0x60000 0x1000>; - #interrupt-cells = <1>; - }; - - vic1: interrupt-controller@64000 { - compatible = "arm,pl192-vic"; - interrupt-controller; - reg = <0x64000 0x1000>; - #interrupt-cells = <1>; - }; - - fuse: picoxcell-fuse@80000 { - compatible = "picoxcell,fuse-pc3x3"; - reg = <0x80000 0x10000>; - }; - - ssi: picoxcell-spi@90000 { - compatible = "picoxcell,spi"; - reg = <0x90000 0x10000>; - interrupt-parent = <&vic0>; - interrupts = <10>; - }; - - ipsec: spacc@100000 { - compatible = "picochip,spacc-ipsec"; - reg = <0x100000 0x10000>; - interrupt-parent = <&vic0>; - interrupts = <24>; - ref-clock = <&ipsec_clk>, "ref"; - }; - - srtp: spacc@140000 { - compatible = "picochip,spacc-srtp"; - reg = <0x140000 0x10000>; - interrupt-parent = <&vic0>; - interrupts = <23>; - }; - - l2_engine: spacc@180000 { - compatible = "picochip,spacc-l2"; - reg = <0x180000 0x10000>; - interrupt-parent = <&vic0>; - interrupts = <22>; - ref-clock = <&l2_clk>, "ref"; - }; - - apb { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x200000 0x80000>; - - rtc0: rtc@0 { - compatible = "picochip,pc3x2-rtc"; - clock-freq = <200000000>; - reg = <0x00000 0xf>; - interrupt-parent = <&vic0>; - interrupts = <8>; - }; - - timer0: timer@10000 { - compatible = "picochip,pc3x2-timer"; - interrupt-parent = <&vic0>; - interrupts = <4>; - clock-freq = <200000000>; - reg = <0x10000 0x14>; - }; - - timer1: timer@10014 { - compatible = "picochip,pc3x2-timer"; - interrupt-parent = <&vic0>; - interrupts = <5>; - clock-freq = <200000000>; - reg = <0x10014 0x14>; - }; - - gpio: gpio@20000 { - compatible = "snps,dw-apb-gpio"; - reg = <0x20000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - - banka: gpio-controller@0 { - compatible = "snps,dw-apb-gpio-bank"; - gpio-controller; - #gpio-cells = <2>; - gpio-generic,nr-gpio = <8>; - - regoffset-dat = <0x50>; - regoffset-set = <0x00>; - regoffset-dirout = <0x04>; - }; - - bankb: gpio-controller@1 { - compatible = "snps,dw-apb-gpio-bank"; - gpio-controller; - #gpio-cells = <2>; - gpio-generic,nr-gpio = <16>; - - regoffset-dat = <0x54>; - regoffset-set = <0x0c>; - regoffset-dirout = <0x10>; - }; - - bankd: gpio-controller@2 { - compatible = "snps,dw-apb-gpio-bank"; - gpio-controller; - #gpio-cells = <2>; - gpio-generic,nr-gpio = <30>; - - regoffset-dat = <0x5c>; - regoffset-set = <0x24>; - regoffset-dirout = <0x28>; - }; - }; - - uart0: uart@30000 { - compatible = "snps,dw-apb-uart"; - reg = <0x30000 0x1000>; - interrupt-parent = <&vic1>; - interrupts = <10>; - clock-frequency = <3686400>; - reg-shift = <2>; - reg-io-width = <4>; - }; - - uart1: uart@40000 { - compatible = "snps,dw-apb-uart"; - reg = <0x40000 0x1000>; - interrupt-parent = <&vic1>; - interrupts = <9>; - clock-frequency = <3686400>; - reg-shift = <2>; - reg-io-width = <4>; - }; - - wdog: watchdog@50000 { - compatible = "snps,dw-apb-wdg"; - reg = <0x50000 0x10000>; - interrupt-parent = <&vic0>; - interrupts = <11>; - bus-clock = <&pclk>, "bus"; - }; - - timer2: timer@60000 { - compatible = "picochip,pc3x2-timer"; - interrupt-parent = <&vic0>; - interrupts = <6>; - clock-freq = <200000000>; - reg = <0x60000 0x14>; - }; - - timer3: timer@60014 { - compatible = "picochip,pc3x2-timer"; - interrupt-parent = <&vic0>; - interrupts = <7>; - clock-freq = <200000000>; - reg = <0x60014 0x14>; - }; - }; - }; - - rwid-axi { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges; - - ebi@50000000 { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0x40000000 0x08000000 - 1 0 0x48000000 0x08000000 - 2 0 0x50000000 0x08000000 - 3 0 0x58000000 0x08000000>; - }; - - axi2pico@c0000000 { - compatible = "picochip,axi2pico-pc3x3"; - reg = <0xc0000000 0x10000>; - interrupt-parent = <&vic0>; - interrupts = <13 14 15 16 17 18 19 20 21>; - }; - - otp@ffff8000 { - compatible = "picochip,otp-pc3x3"; - reg = <0xffff8000 0x8000>; - }; - }; -}; diff --git a/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts b/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts deleted file mode 100644 index 3626e5380681..000000000000 --- a/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts +++ /dev/null @@ -1,78 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2011 Picochip, Jamie Iles - */ - -/dts-v1/; -/include/ "picoxcell-pc3x2.dtsi" -/ { - model = "Picochip PC7302 (PC3X2)"; - compatible = "picochip,pc7302-pc3x2", "picochip,pc3x2"; - - memory { - device_type = "memory"; - reg = <0x0 0x08000000>; - }; - - chosen { - stdout-path = &uart0; - }; - - clocks { - ref_clk: clock@1 { - compatible = "fixed-clock"; - clock-outputs = "ref"; - clock-frequency = <20000000>; - }; - }; - - rwid-axi { - ebi@50000000 { - nand: gpio-nand@2,0 { - compatible = "gpio-control-nand"; - #address-cells = <1>; - #size-cells = <1>; - reg = <2 0x0000 0x1000>; - bus-clock = <&pclk>, "bus"; - gpio-control-nand,io-sync-reg = - <0x00000000 0x80220000>; - - gpios = <&banka 1 0 /* rdy */ - &banka 2 0 /* nce */ - &banka 3 0 /* ale */ - &banka 4 0 /* cle */ - 0 /* nwp */>; - - boot@100000 { - label = "Boot"; - reg = <0x100000 0x80000>; - }; - - redundant-boot@200000 { - label = "Redundant Boot"; - reg = <0x200000 0x80000>; - }; - - boot-env@300000 { - label = "Boot Evironment"; - reg = <0x300000 0x20000>; - }; - - redundant-boot-env@320000 { - label = "Redundant Boot Environment"; - reg = <0x300000 0x20000>; - }; - - kernel@380000 { - label = "Kernel"; - reg = <0x380000 0x800000>; - }; - - fs@b80000 { - label = "File System"; - reg = <0xb80000 0xf480000>; - }; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts b/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts deleted file mode 100644 index 3eca65e8ee09..000000000000 --- a/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts +++ /dev/null @@ -1,84 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2011 Picochip, Jamie Iles - */ - -/dts-v1/; -/include/ "picoxcell-pc3x3.dtsi" -/ { - model = "Picochip PC7302 (PC3X3)"; - compatible = "picochip,pc7302-pc3x3", "picochip,pc3x3"; - - memory { - device_type = "memory"; - reg = <0x0 0x08000000>; - }; - - chosen { - stdout-path = &uart0; - }; - - clocks { - ref_clk: clock@10 { - compatible = "fixed-clock"; - clock-outputs = "ref"; - clock-frequency = <20000000>; - }; - - clkgate: clkgate@800a0048 { - clock@4 { - picochip,clk-no-disable; - }; - }; - }; - - rwid-axi { - ebi@50000000 { - nand: gpio-nand@2,0 { - compatible = "gpio-control-nand"; - #address-cells = <1>; - #size-cells = <1>; - reg = <2 0x0000 0x1000>; - bus-clock = <&ebi_clk>, "bus"; - gpio-control-nand,io-sync-reg = - <0x00000000 0x80220000>; - - gpios = <&banka 1 0 /* rdy */ - &banka 2 0 /* nce */ - &banka 3 0 /* ale */ - &banka 4 0 /* cle */ - 0 /* nwp */>; - - boot@100000 { - label = "Boot"; - reg = <0x100000 0x80000>; - }; - - redundant-boot@200000 { - label = "Redundant Boot"; - reg = <0x200000 0x80000>; - }; - - boot-env@300000 { - label = "Boot Evironment"; - reg = <0x300000 0x20000>; - }; - - redundant-boot-env@320000 { - label = "Redundant Boot Environment"; - reg = <0x300000 0x20000>; - }; - - kernel@380000 { - label = "Kernel"; - reg = <0x380000 0x800000>; - }; - - fs@b80000 { - label = "File System"; - reg = <0xb80000 0xf480000>; - }; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/prima2-evb.dts b/arch/arm/boot/dts/prima2-evb.dts deleted file mode 100644 index 7394f764df65..000000000000 --- a/arch/arm/boot/dts/prima2-evb.dts +++ /dev/null @@ -1,37 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * DTS file for CSR SiRFprimaII Evaluation Board - * - * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. - */ - -/dts-v1/; - -/include/ "prima2.dtsi" - -/ { - model = "CSR SiRFprimaII Evaluation Board"; - compatible = "sirf,prima2", "sirf,prima2-cb"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; - }; - - axi { - peri-iobg { - uart@b0060000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_a>; - }; - spi@b00d0000 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>; - }; - spi@b0170000 { - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins_a>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi deleted file mode 100644 index 7d3d93c22ed9..000000000000 --- a/arch/arm/boot/dts/prima2.dtsi +++ /dev/null @@ -1,838 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * DTS file for CSR SiRFprimaII SoC - * - * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. - */ - -/ { - compatible = "sirf,prima2"; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&intc>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "arm,cortex-a9"; - device_type = "cpu"; - reg = <0x0>; - d-cache-line-size = <32>; - i-cache-line-size = <32>; - d-cache-size = <32768>; - i-cache-size = <32768>; - /* from bootloader */ - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - clocks = <&clks 12>; - operating-points = < - /* kHz uV */ - 200000 1025000 - 400000 1025000 - 664000 1050000 - 800000 1100000 - >; - clock-latency = <150000>; - }; - }; - - arm-pmu { - compatible = "arm,cortex-a9-pmu"; - interrupts = <29>; - }; - - axi { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x40000000 0x40000000 0x80000000>; - - cache-controller@80040000 { - compatible = "arm,pl310-cache"; - reg = <0x80040000 0x1000>; - interrupts = <59>; - arm,tag-latency = <1 1 1>; - arm,data-latency = <1 1 1>; - arm,filter-ranges = <0 0x40000000>; - }; - - intc: interrupt-controller@80020000 { - #interrupt-cells = <1>; - interrupt-controller; - compatible = "sirf,prima2-intc"; - reg = <0x80020000 0x1000>; - }; - - sys-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x88000000 0x88000000 0x40000>; - - clks: clock-controller@88000000 { - compatible = "sirf,prima2-clkc"; - reg = <0x88000000 0x1000>; - interrupts = <3>; - #clock-cells = <1>; - }; - - rstc: reset-controller@88010000 { - compatible = "sirf,prima2-rstc"; - reg = <0x88010000 0x1000>; - #reset-cells = <1>; - }; - - rsc-controller@88020000 { - compatible = "sirf,prima2-rsc"; - reg = <0x88020000 0x1000>; - }; - - cphifbg@88030000 { - compatible = "sirf,prima2-cphifbg"; - reg = <0x88030000 0x1000>; - clocks = <&clks 42>; - }; - }; - - mem-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x90000000 0x90000000 0x10000>; - - memory-controller@90000000 { - compatible = "sirf,prima2-memc"; - reg = <0x90000000 0x2000>; - interrupts = <27>; - clocks = <&clks 5>; - }; - - memc-monitor { - compatible = "sirf,prima2-memcmon"; - reg = <0x90002000 0x200>; - interrupts = <4>; - clocks = <&clks 32>; - }; - }; - - disp-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x90010000 0x90010000 0x30000>; - - display@90010000 { - compatible = "sirf,prima2-lcd"; - reg = <0x90010000 0x20000>; - interrupts = <30>; - }; - - vpp@90020000 { - compatible = "sirf,prima2-vpp"; - reg = <0x90020000 0x10000>; - interrupts = <31>; - clocks = <&clks 35>; - resets = <&rstc 6>; - }; - }; - - graphics-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x98000000 0x98000000 0x8000000>; - - graphics@98000000 { - compatible = "powervr,sgx531"; - reg = <0x98000000 0x8000000>; - interrupts = <6>; - clocks = <&clks 32>; - }; - }; - - multimedia-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xa0000000 0xa0000000 0x8000000>; - - multimedia@a0000000 { - compatible = "sirf,prima2-video-codec"; - reg = <0xa0000000 0x8000000>; - interrupts = <5>; - clocks = <&clks 33>; - }; - }; - - dsp-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xa8000000 0xa8000000 0x2000000>; - - dspif@a8000000 { - compatible = "sirf,prima2-dspif"; - reg = <0xa8000000 0x10000>; - interrupts = <9>; - resets = <&rstc 1>; - }; - - gps@a8010000 { - compatible = "sirf,prima2-gps"; - reg = <0xa8010000 0x10000>; - interrupts = <7>; - clocks = <&clks 9>; - resets = <&rstc 2>; - }; - - dsp@a9000000 { - compatible = "sirf,prima2-dsp"; - reg = <0xa9000000 0x1000000>; - interrupts = <8>; - clocks = <&clks 8>; - resets = <&rstc 0>; - }; - }; - - peri-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xb0000000 0xb0000000 0x180000>, - <0x56000000 0x56000000 0x1b00000>; - - timer@b0020000 { - compatible = "sirf,prima2-tick"; - reg = <0xb0020000 0x1000>; - interrupts = <0>; - clocks = <&clks 11>; - }; - - nand@b0030000 { - compatible = "sirf,prima2-nand"; - reg = <0xb0030000 0x10000>; - interrupts = <41>; - clocks = <&clks 26>; - }; - - audio@b0040000 { - compatible = "sirf,prima2-audio"; - reg = <0xb0040000 0x10000>; - interrupts = <35>; - clocks = <&clks 27>; - }; - - uart0: uart@b0050000 { - cell-index = <0>; - compatible = "sirf,prima2-uart"; - reg = <0xb0050000 0x1000>; - interrupts = <17>; - fifosize = <128>; - clocks = <&clks 13>; - dmas = <&dmac1 5>, <&dmac0 2>; - dma-names = "rx", "tx"; - }; - - uart1: uart@b0060000 { - cell-index = <1>; - compatible = "sirf,prima2-uart"; - reg = <0xb0060000 0x1000>; - interrupts = <18>; - fifosize = <32>; - clocks = <&clks 14>; - }; - - uart2: uart@b0070000 { - cell-index = <2>; - compatible = "sirf,prima2-uart"; - reg = <0xb0070000 0x1000>; - interrupts = <19>; - fifosize = <128>; - clocks = <&clks 15>; - dmas = <&dmac0 6>, <&dmac0 7>; - dma-names = "rx", "tx"; - }; - - usp0: usp@b0080000 { - cell-index = <0>; - compatible = "sirf,prima2-usp"; - reg = <0xb0080000 0x10000>; - interrupts = <20>; - fifosize = <128>; - clocks = <&clks 28>; - dmas = <&dmac1 1>, <&dmac1 2>; - dma-names = "rx", "tx"; - }; - - usp1: usp@b0090000 { - cell-index = <1>; - compatible = "sirf,prima2-usp"; - reg = <0xb0090000 0x10000>; - interrupts = <21>; - fifosize = <128>; - clocks = <&clks 29>; - dmas = <&dmac0 14>, <&dmac0 15>; - dma-names = "rx", "tx"; - }; - - usp2: usp@b00a0000 { - cell-index = <2>; - compatible = "sirf,prima2-usp"; - reg = <0xb00a0000 0x10000>; - interrupts = <22>; - fifosize = <128>; - clocks = <&clks 30>; - dmas = <&dmac0 10>, <&dmac0 11>; - dma-names = "rx", "tx"; - }; - - dmac0: dma-controller@b00b0000 { - cell-index = <0>; - compatible = "sirf,prima2-dmac"; - reg = <0xb00b0000 0x10000>; - interrupts = <12>; - clocks = <&clks 24>; - #dma-cells = <1>; - }; - - dmac1: dma-controller@b0160000 { - cell-index = <1>; - compatible = "sirf,prima2-dmac"; - reg = <0xb0160000 0x10000>; - interrupts = <13>; - clocks = <&clks 25>; - #dma-cells = <1>; - }; - - vip@b00C0000 { - compatible = "sirf,prima2-vip"; - reg = <0xb00C0000 0x10000>; - clocks = <&clks 31>; - interrupts = <14>; - sirf,vip-dma-rx-channel = <16>; - }; - - spi0: spi@b00d0000 { - cell-index = <0>; - compatible = "sirf,prima2-spi"; - reg = <0xb00d0000 0x10000>; - interrupts = <15>; - sirf,spi-num-chipselects = <1>; - dmas = <&dmac1 9>, - <&dmac1 4>; - dma-names = "rx", "tx"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clks 19>; - status = "disabled"; - }; - - spi1: spi@b0170000 { - cell-index = <1>; - compatible = "sirf,prima2-spi"; - reg = <0xb0170000 0x10000>; - interrupts = <16>; - sirf,spi-num-chipselects = <1>; - dmas = <&dmac0 12>, - <&dmac0 13>; - dma-names = "rx", "tx"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clks 20>; - status = "disabled"; - }; - - i2c0: i2c@b00e0000 { - cell-index = <0>; - compatible = "sirf,prima2-i2c"; - reg = <0xb00e0000 0x10000>; - interrupts = <24>; - clocks = <&clks 17>; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c1: i2c@b00f0000 { - cell-index = <1>; - compatible = "sirf,prima2-i2c"; - reg = <0xb00f0000 0x10000>; - interrupts = <25>; - clocks = <&clks 18>; - #address-cells = <1>; - #size-cells = <0>; - }; - - tsc@b0110000 { - compatible = "sirf,prima2-tsc"; - reg = <0xb0110000 0x10000>; - interrupts = <33>; - clocks = <&clks 16>; - }; - - gpio: pinctrl@b0120000 { - #gpio-cells = <2>; - #interrupt-cells = <2>; - compatible = "sirf,prima2-pinctrl"; - reg = <0xb0120000 0x10000>; - interrupts = <43 44 45 46 47>; - gpio-controller; - interrupt-controller; - - lcd_16pins_a: lcd0@0 { - lcd { - sirf,pins = "lcd_16bitsgrp"; - sirf,function = "lcd_16bits"; - }; - }; - lcd_18pins_a: lcd0@1 { - lcd { - sirf,pins = "lcd_18bitsgrp"; - sirf,function = "lcd_18bits"; - }; - }; - lcd_24pins_a: lcd0@2 { - lcd { - sirf,pins = "lcd_24bitsgrp"; - sirf,function = "lcd_24bits"; - }; - }; - lcdrom_pins_a: lcdrom0@0 { - lcd { - sirf,pins = "lcdromgrp"; - sirf,function = "lcdrom"; - }; - }; - uart0_pins_a: uart0@0 { - uart { - sirf,pins = "uart0grp"; - sirf,function = "uart0"; - }; - }; - uart0_noflow_pins_a: uart0@1 { - uart { - sirf,pins = "uart0_nostreamctrlgrp"; - sirf,function = "uart0_nostreamctrl"; - }; - }; - uart1_pins_a: uart1@0 { - uart { - sirf,pins = "uart1grp"; - sirf,function = "uart1"; - }; - }; - uart2_pins_a: uart2@0 { - uart { - sirf,pins = "uart2grp"; - sirf,function = "uart2"; - }; - }; - uart2_noflow_pins_a: uart2@1 { - uart { - sirf,pins = "uart2_nostreamctrlgrp"; - sirf,function = "uart2_nostreamctrl"; - }; - }; - spi0_pins_a: spi0@0 { - spi { - sirf,pins = "spi0grp"; - sirf,function = "spi0"; - }; - }; - spi1_pins_a: spi1@0 { - spi { - sirf,pins = "spi1grp"; - sirf,function = "spi1"; - }; - }; - i2c0_pins_a: i2c0@0 { - i2c { - sirf,pins = "i2c0grp"; - sirf,function = "i2c0"; - }; - }; - i2c1_pins_a: i2c1@0 { - i2c { - sirf,pins = "i2c1grp"; - sirf,function = "i2c1"; - }; - }; - pwm0_pins_a: pwm0@0 { - pwm { - sirf,pins = "pwm0grp"; - sirf,function = "pwm0"; - }; - }; - pwm1_pins_a: pwm1@0 { - pwm { - sirf,pins = "pwm1grp"; - sirf,function = "pwm1"; - }; - }; - pwm2_pins_a: pwm2@0 { - pwm { - sirf,pins = "pwm2grp"; - sirf,function = "pwm2"; - }; - }; - pwm3_pins_a: pwm3@0 { - pwm { - sirf,pins = "pwm3grp"; - sirf,function = "pwm3"; - }; - }; - gps_pins_a: gps@0 { - gps { - sirf,pins = "gpsgrp"; - sirf,function = "gps"; - }; - }; - vip_pins_a: vip@0 { - vip { - sirf,pins = "vipgrp"; - sirf,function = "vip"; - }; - }; - sdmmc0_pins_a: sdmmc0@0 { - sdmmc0 { - sirf,pins = "sdmmc0grp"; - sirf,function = "sdmmc0"; - }; - }; - sdmmc1_pins_a: sdmmc1@0 { - sdmmc1 { - sirf,pins = "sdmmc1grp"; - sirf,function = "sdmmc1"; - }; - }; - sdmmc2_pins_a: sdmmc2@0 { - sdmmc2 { - sirf,pins = "sdmmc2grp"; - sirf,function = "sdmmc2"; - }; - }; - sdmmc3_pins_a: sdmmc3@0 { - sdmmc3 { - sirf,pins = "sdmmc3grp"; - sirf,function = "sdmmc3"; - }; - }; - sdmmc4_pins_a: sdmmc4@0 { - sdmmc4 { - sirf,pins = "sdmmc4grp"; - sirf,function = "sdmmc4"; - }; - }; - sdmmc5_pins_a: sdmmc5@0 { - sdmmc5 { - sirf,pins = "sdmmc5grp"; - sirf,function = "sdmmc5"; - }; - }; - i2s_mclk_pins_a: i2s_mclk@0 { - i2s_mclk { - sirf,pins = "i2smclkgrp"; - sirf,function = "i2s_mclk"; - }; - }; - i2s_ext_clk_input_pins_a: i2s_ext_clk_input@0 { - i2s_ext_clk_input { - sirf,pins = "i2s_ext_clk_inputgrp"; - sirf,function = "i2s_ext_clk_input"; - }; - }; - i2s_pins_a: i2s@0 { - i2s { - sirf,pins = "i2sgrp"; - sirf,function = "i2s"; - }; - }; - i2s_no_din_pins_a: i2s_no_din@0 { - i2s_no_din { - sirf,pins = "i2s_no_dingrp"; - sirf,function = "i2s_no_din"; - }; - }; - i2s_6chn_pins_a: i2s_6chn@0 { - i2s_6chn { - sirf,pins = "i2s_6chngrp"; - sirf,function = "i2s_6chn"; - }; - }; - ac97_pins_a: ac97@0 { - ac97 { - sirf,pins = "ac97grp"; - sirf,function = "ac97"; - }; - }; - nand_pins_a: nand@0 { - nand { - sirf,pins = "nandgrp"; - sirf,function = "nand"; - }; - }; - usp0_pins_a: usp0@0 { - usp0 { - sirf,pins = "usp0grp"; - sirf,function = "usp0"; - }; - }; - usp0_uart_nostreamctrl_pins_a: usp0@1 { - usp0 { - sirf,pins = - "usp0_uart_nostreamctrl_grp"; - sirf,function = - "usp0_uart_nostreamctrl"; - }; - }; - usp0_only_utfs_pins_a: usp0@2 { - usp0 { - sirf,pins = "usp0_only_utfs_grp"; - sirf,function = "usp0_only_utfs"; - }; - }; - usp0_only_urfs_pins_a: usp0@3 { - usp0 { - sirf,pins = "usp0_only_urfs_grp"; - sirf,function = "usp0_only_urfs"; - }; - }; - usp1_pins_a: usp1@0 { - usp1 { - sirf,pins = "usp1grp"; - sirf,function = "usp1"; - }; - }; - usp1_uart_nostreamctrl_pins_a: usp1@1 { - usp1 { - sirf,pins = - "usp1_uart_nostreamctrl_grp"; - sirf,function = - "usp1_uart_nostreamctrl"; - }; - }; - usp2_pins_a: usp2@0 { - usp2 { - sirf,pins = "usp2grp"; - sirf,function = "usp2"; - }; - }; - usp2_uart_nostreamctrl_pins_a: usp2@1 { - usp2 { - sirf,pins = - "usp2_uart_nostreamctrl_grp"; - sirf,function = - "usp2_uart_nostreamctrl"; - }; - }; - usb0_utmi_drvbus_pins_a: usb0_utmi_drvbus@0 { - usb0_utmi_drvbus { - sirf,pins = "usb0_utmi_drvbusgrp"; - sirf,function = "usb0_utmi_drvbus"; - }; - }; - usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus@0 { - usb1_utmi_drvbus { - sirf,pins = "usb1_utmi_drvbusgrp"; - sirf,function = "usb1_utmi_drvbus"; - }; - }; - usb1_dp_dn_pins_a: usb1_dp_dn@0 { - usb1_dp_dn { - sirf,pins = "usb1_dp_dngrp"; - sirf,function = "usb1_dp_dn"; - }; - }; - uart1_route_io_usb1_pins_a: uart1_route_io_usb1@0 { - uart1_route_io_usb1 { - sirf,pins = "uart1_route_io_usb1grp"; - sirf,function = "uart1_route_io_usb1"; - }; - }; - warm_rst_pins_a: warm_rst@0 { - warm_rst { - sirf,pins = "warm_rstgrp"; - sirf,function = "warm_rst"; - }; - }; - pulse_count_pins_a: pulse_count@0 { - pulse_count { - sirf,pins = "pulse_countgrp"; - sirf,function = "pulse_count"; - }; - }; - cko0_pins_a: cko0@0 { - cko0 { - sirf,pins = "cko0grp"; - sirf,function = "cko0"; - }; - }; - cko1_pins_a: cko1@0 { - cko1 { - sirf,pins = "cko1grp"; - sirf,function = "cko1"; - }; - }; - }; - - pwm@b0130000 { - compatible = "sirf,prima2-pwm"; - reg = <0xb0130000 0x10000>; - clocks = <&clks 21>; - }; - - efusesys@b0140000 { - compatible = "sirf,prima2-efuse"; - reg = <0xb0140000 0x10000>; - clocks = <&clks 22>; - }; - - pulsec@b0150000 { - compatible = "sirf,prima2-pulsec"; - reg = <0xb0150000 0x10000>; - interrupts = <48>; - clocks = <&clks 23>; - }; - - pci-iobg { - compatible = "sirf,prima2-pciiobg", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x56000000 0x56000000 0x1b00000>; - - sd0: sdhci@56000000 { - cell-index = <0>; - compatible = "sirf,prima2-sdhc"; - reg = <0x56000000 0x100000>; - interrupts = <38>; - status = "disabled"; - bus-width = <8>; - clocks = <&clks 36>; - }; - - sd1: sdhci@56100000 { - cell-index = <1>; - compatible = "sirf,prima2-sdhc"; - reg = <0x56100000 0x100000>; - interrupts = <38>; - status = "disabled"; - bus-width = <4>; - clocks = <&clks 36>; - }; - - sd2: sdhci@56200000 { - cell-index = <2>; - compatible = "sirf,prima2-sdhc"; - reg = <0x56200000 0x100000>; - interrupts = <23>; - status = "disabled"; - clocks = <&clks 37>; - }; - - sd3: sdhci@56300000 { - cell-index = <3>; - compatible = "sirf,prima2-sdhc"; - reg = <0x56300000 0x100000>; - interrupts = <23>; - status = "disabled"; - clocks = <&clks 37>; - }; - - sd4: sdhci@56400000 { - cell-index = <4>; - compatible = "sirf,prima2-sdhc"; - reg = <0x56400000 0x100000>; - interrupts = <39>; - status = "disabled"; - clocks = <&clks 38>; - }; - - sd5: sdhci@56500000 { - cell-index = <5>; - compatible = "sirf,prima2-sdhc"; - reg = <0x56500000 0x100000>; - interrupts = <39>; - clocks = <&clks 38>; - }; - - pci-copy@57900000 { - compatible = "sirf,prima2-pcicp"; - reg = <0x57900000 0x100000>; - interrupts = <40>; - }; - - rom-interface@57a00000 { - compatible = "sirf,prima2-romif"; - reg = <0x57a00000 0x100000>; - }; - }; - }; - - rtc-iobg { - compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x80030000 0x10000>; - - gpsrtc@1000 { - compatible = "sirf,prima2-gpsrtc"; - reg = <0x1000 0x1000>; - interrupts = <55 56 57>; - }; - - sysrtc@2000 { - compatible = "sirf,prima2-sysrtc"; - reg = <0x2000 0x1000>; - interrupts = <52 53 54>; - }; - - minigpsrtc@2000 { - compatible = "sirf,prima2-minigpsrtc"; - reg = <0x2000 0x1000>; - interrupts = <54>; - }; - - pwrc@3000 { - compatible = "sirf,prima2-pwrc"; - reg = <0x3000 0x1000>; - interrupts = <32>; - }; - }; - - uus-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xb8000000 0xb8000000 0x40000>; - - usb0: usb@b00e0000 { - compatible = "chipidea,ci13611a-prima2"; - reg = <0xb8000000 0x10000>; - interrupts = <10>; - clocks = <&clks 40>; - }; - - usb1: usb@b00f0000 { - compatible = "chipidea,ci13611a-prima2"; - reg = <0xb8010000 0x10000>; - interrupts = <11>; - clocks = <&clks 41>; - }; - - sata@b00f0000 { - compatible = "synopsys,dwc-ahsata"; - reg = <0xb8020000 0x10000>; - interrupts = <37>; - }; - - security@b00f0000 { - compatible = "sirf,prima2-security"; - reg = <0xb8030000 0x10000>; - interrupts = <42>; - clocks = <&clks 7>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts index 4e6c50d45cb2..dace8ffeb991 100644 --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts @@ -461,11 +461,11 @@ }; gsbi@19800000 { - status = "ok"; + status = "okay"; qcom,mode = <GSBI_PROT_I2C>; i2c@19880000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dragon_gsbi8_i2c_pins>; @@ -497,17 +497,17 @@ }; gsbi@19c00000 { - status = "ok"; + status = "okay"; qcom,mode = <GSBI_PROT_I2C_UART>; serial@19c40000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dragon_gsbi12_serial_pins>; }; i2c@19c80000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dragon_gsbi12_i2c_pins>; @@ -571,7 +571,7 @@ external-bus@1a100000 { /* The EBI2 will instantiate first, then populate its children */ - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dragon_ebi2_pins>; diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts index a701d4bac320..3bce47d16ab3 100644 --- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts +++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts @@ -302,11 +302,11 @@ }; gsbi@16500000 { - status = "ok"; + status = "okay"; qcom,mode = <GSBI_PROT_I2C_UART>; serial@16540000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&gsbi6_uart_4pins>; @@ -314,10 +314,10 @@ }; gsbi@16600000 { - status = "ok"; + status = "okay"; qcom,mode = <GSBI_PROT_I2C_UART>; serial@16640000 { - status = "ok"; + status = "okay"; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index 209eb21cea00..0148148a8e0a 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -141,10 +141,10 @@ }; gsbi@16600000 { - status = "ok"; + status = "okay"; qcom,mode = <GSBI_PROT_I2C_UART>; serial@16640000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&gsbi7_uart_2pins>; }; @@ -152,7 +152,7 @@ /* OTG */ usb@12500000 { - status = "ok"; + status = "okay"; dr_mode = "otg"; ulpi { phy { @@ -209,7 +209,7 @@ }; pci@1b500000 { - status = "ok"; + status = "okay"; vdda-supply = <&pm8921_s3>; vdda_phy-supply = <&pm8921_lvs6>; vdda_refclk-supply = <&v3p3_fixed>; diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index 83aaf4a74398..d0a17b5a5fa3 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -215,21 +215,21 @@ }; gsbi@16500000 { - status = "ok"; + status = "okay"; qcom,mode = <GSBI_PROT_UART_W_FC>; serial@16540000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&gsbi6_uart_4pins>; }; }; gsbi@16600000 { - status = "ok"; + status = "okay"; qcom,mode = <GSBI_PROT_I2C_UART>; serial@16640000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&gsbi7_uart_2pins>; }; @@ -279,7 +279,7 @@ }; pci@1b500000 { - status = "ok"; + status = "okay"; vdda-supply = <&pm8921_s3>; vdda_phy-supply = <&pm8921_lvs6>; vdda_refclk-supply = <&ext_3p3v>; diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts index 8bf488fb86ad..72e47bdc5c12 100644 --- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts +++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts @@ -362,11 +362,11 @@ }; gsbi@1a200000 { - status = "ok"; + status = "okay"; qcom,mode = <GSBI_PROT_I2C_UART>; serial@1a240000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&gsbi5_uart_pin_a>; diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts index 244f04e19c9d..83793b835d40 100644 --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -19,13 +19,13 @@ soc { serial@f991e000 { - status = "ok"; + status = "okay"; }; sdhci@f9824900 { bus-width = <8>; non-removable; - status = "ok"; + status = "okay"; vmmc-supply = <&pm8941_l20>; vqmmc-supply = <&pm8941_s3>; @@ -39,14 +39,14 @@ pinctrl-names = "default"; pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; bus-width = <4>; - status = "ok"; + status = "okay"; vmmc-supply = <&pm8941_l21>; vqmmc-supply = <&pm8941_l13>; }; usb@f9a55000 { - status = "ok"; + status = "okay"; phys = <&usb_hs2_phy>; phy-select = <&tcsr 0xb000 1>; extcon = <&smbb>, <&usb_id>; @@ -56,7 +56,7 @@ adp-disable; ulpi { phy@b { - status = "ok"; + status = "okay"; v3p3-supply = <&pm8941_l24>; v1p8-supply = <&pm8941_l6>; extcon = <&smbb>; diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts new file mode 100644 index 000000000000..028ac8e24797 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq4018-ap120c-ac.dtsi" + +/ { + model = "ALFA Network AP120C-AC Bit"; + + leds { + compatible = "gpio-leds"; + + power { + label = "ap120c-ac:green:power"; + gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + wlan { + label = "ap120c-ac:green:wlan"; + gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; + }; + + support { + label = "ap120c-ac:green:support"; + gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; + panic-indicator; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts new file mode 100644 index 000000000000..b7916fc26d68 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq4018-ap120c-ac.dtsi" + +/ { + leds { + compatible = "gpio-leds"; + + status: status { + label = "ap120c-ac:blue:status"; + gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + + wlan2g { + label = "ap120c-ac:green:wlan2g"; + gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tpt"; + }; + + wlan5g { + label = "ap120c-ac:red:wlan5g"; + gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy1tpt"; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi new file mode 100644 index 000000000000..1f3b1ce82108 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi @@ -0,0 +1,254 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq4019.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "ALFA Network AP120C-AC"; + compatible = "alfa-network,ap120c-ac"; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; +}; + +&tlmm { + i2c0_pins: i2c0_pinmux { + mux_i2c { + function = "blsp_i2c0"; + pins = "gpio58", "gpio59"; + drive-strength = <16>; + bias-disable; + }; + }; + + mdio_pins: mdio_pinmux { + mux_mdio { + pins = "gpio53"; + function = "mdio"; + bias-pull-up; + }; + + mux_mdc { + pins = "gpio52"; + function = "mdc"; + bias-pull-up; + }; + }; + + serial0_pins: serial0_pinmux { + mux_uart { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi0_pins: spi0_pinmux { + mux_spi { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + + mux_cs { + function = "gpio"; + pins = "gpio54", "gpio4"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + usb-power { + line-name = "USB-power"; + gpios = <1 GPIO_ACTIVE_HIGH>; + gpio-hog; + output-high; + }; +}; + +&watchdog { + status = "okay"; +}; + +&prng { + status = "okay"; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_i2c3 { + status = "okay"; + + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + tpm@29 { + compatible = "atmel,at97sc3204t"; + reg = <0x29>; + }; +}; + +&blsp1_spi1 { + status = "okay"; + + pinctrl-0 = <&spi0_pins>; + pinctrl-names = "default"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 4 GPIO_ACTIVE_HIGH>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SBL1"; + reg = <0x00000000 0x00040000>; + read-only; + }; + + partition@40000 { + label = "MIBIB"; + reg = <0x00040000 0x00020000>; + read-only; + }; + + partition@60000 { + label = "QSEE"; + reg = <0x00060000 0x00060000>; + read-only; + }; + + partition@c0000 { + label = "CDT"; + reg = <0x000c0000 0x00010000>; + read-only; + }; + + partition@d0000 { + label = "DDRPARAMS"; + reg = <0x000d0000 0x00010000>; + read-only; + }; + + partition@e0000 { + label = "u-boot-env"; + reg = <0x000e0000 0x00010000>; + }; + + partition@f0000 { + label = "u-boot"; + reg = <0x000f0000 0x00080000>; + read-only; + }; + + partition@170000 { + label = "ART"; + reg = <0x00170000 0x00010000>; + read-only; + }; + + partition@180000 { + label = "priv_data1"; + reg = <0x00180000 0x00010000>; + read-only; + }; + + partition@190000 { + label = "priv_data2"; + reg = <0x00190000 0x00010000>; + read-only; + }; + }; + }; + + nand@1 { + compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ubi1"; + reg = <0x00000000 0x04000000>; + }; + + partition@4000000 { + label = "ubi2"; + reg = <0x04000000 0x04000000>; + }; + }; + }; +}; + +&blsp1_uart1 { + status = "okay"; + + pinctrl-0 = <&serial0_pins>; + pinctrl-names = "default"; +}; + +&cryptobam { + status = "okay"; +}; + +&crypto { + status = "okay"; +}; + +&mdio { + status = "okay"; + + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; +}; + +&wifi0 { + status = "okay"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC"; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&usb3 { + status = "okay"; + + dwc3@8a00000 { + phys = <&usb3_hs_phy>; + phy-names = "usb2-phy"; + }; +}; + +&usb2_hs_phy { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts b/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts new file mode 100644 index 000000000000..394412619894 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts @@ -0,0 +1,214 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +// Copyright (c) 2018, Robert Marko <robimarko@gmail.com> + +#include "qcom-ipq4019.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "8devices Jalapeno"; + compatible = "8dev,jalapeno"; +}; + +&tlmm { + mdio_pins: mdio_pinmux { + pinmux_1 { + pins = "gpio53"; + function = "mdio"; + }; + + pinmux_2 { + pins = "gpio52"; + function = "mdc"; + }; + + pinconf { + pins = "gpio52", "gpio53"; + bias-pull-up; + }; + }; + + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pin { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <2>; + bias-disable; + }; + + pin_cs { + function = "gpio"; + pins = "gpio54", "gpio59"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&watchdog { + status = "okay"; +}; + +&prng { + status = "okay"; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_spi1 { + status = "okay"; + + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>; + + flash@0 { + status = "okay"; + + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SBL1"; + reg = <0x00000000 0x00040000>; + read-only; + }; + + partition@40000 { + label = "MIBIB"; + reg = <0x00040000 0x00020000>; + read-only; + }; + + partition@60000 { + label = "QSEE"; + reg = <0x00060000 0x00060000>; + read-only; + }; + + partition@c0000 { + label = "CDT"; + reg = <0x000c0000 0x00010000>; + read-only; + }; + + partition@d0000 { + label = "DDRPARAMS"; + reg = <0x000d0000 0x00010000>; + read-only; + }; + + partition@e0000 { + label = "u-boot-env"; + reg = <0x000e0000 0x00010000>; + }; + + partition@f0000 { + label = "u-boot"; + reg = <0x000f0000 0x00080000>; + read-only; + }; + + partition@170000 { + label = "ART"; + reg = <0x00170000 0x00010000>; + read-only; + }; + }; + }; + + spi-nand@1 { + status = "okay"; + + compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ubi1"; + reg = <0x00000000 0x04000000>; + }; + + partition@4000000 { + label = "ubi2"; + reg = <0x04000000 0x04000000>; + }; + }; + }; +}; + +&blsp1_uart1 { + status = "okay"; + + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; +}; + +&cryptobam { + status = "okay"; +}; + +&crypto { + status = "okay"; +}; + +&mdio { + status = "okay"; + + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; +}; + +&wifi0 { + status = "okay"; + + qcom,ath10k-calibration-variant = "8devices-Jalapeno"; +}; + +&wifi1 { + status = "okay"; + + qcom,ath10k-calibration-variant = "8devices-Jalapeno"; +}; + +&usb3_ss_phy { + status = "okay"; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&usb2_hs_phy { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi index 418f9a022336..c93b2164db44 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi @@ -30,7 +30,7 @@ soc { rng@22000 { - status = "ok"; + status = "okay"; }; pinctrl@1000000 { @@ -66,13 +66,13 @@ }; blsp_dma: dma@7884000 { - status = "ok"; + status = "okay"; }; spi@78b5000 { pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; cs-gpios = <&tlmm 54 0>; mx25l25635e@0 { @@ -87,27 +87,27 @@ serial@78af000 { pinctrl-0 = <&serial_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; }; cryptobam: dma@8e04000 { - status = "ok"; + status = "okay"; }; crypto@8e3a000 { - status = "ok"; + status = "okay"; }; watchdog@b017000 { - status = "ok"; + status = "okay"; }; wifi@a000000 { - status = "ok"; + status = "okay"; }; wifi@a800000 { - status = "ok"; + status = "okay"; }; }; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts index 7a96f300bc8d..b0f476ff017f 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts @@ -9,11 +9,11 @@ soc { dma@7984000 { - status = "ok"; + status = "okay"; }; qpic-nand@79b0000 { - status = "ok"; + status = "okay"; }; }; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi index 7c1eb1963c67..7a337dc08741 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi @@ -70,23 +70,23 @@ serial@78af000 { pinctrl-0 = <&serial_0_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; }; serial@78b0000 { pinctrl-0 = <&serial_1_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; }; dma@7884000 { - status = "ok"; + status = "okay"; }; spi@78b5000 { /* BLSP1 QUP1 */ pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; cs-gpios = <&tlmm 12 0>; m25p80@0 { @@ -99,7 +99,7 @@ }; pci@40000000 { - status = "ok"; + status = "okay"; perst-gpio = <&tlmm 38 0x1>; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts index 8c7ef6537ae6..f343a2244386 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts @@ -9,12 +9,12 @@ soc { pci@40000000 { - status = "ok"; + status = "okay"; perst-gpio = <&tlmm 38 0x1>; }; spi@78b6000 { - status = "ok"; + status = "okay"; }; pinctrl@1000000 { @@ -43,13 +43,13 @@ serial@78b0000 { pinctrl-0 = <&serial_1_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; }; spi@78b5000 { pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; cs-gpios = <&tlmm 12 0>; m25p80@0 { diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts index af7a9028d492..582acb681a98 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts @@ -19,7 +19,7 @@ serial@78b0000 { pinctrl-0 = <&serial_1_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; }; }; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi index 9f1a5a668772..94872518b5a2 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi @@ -49,27 +49,27 @@ serial@78af000 { pinctrl-0 = <&serial_0_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; }; dma@7884000 { - status = "ok"; + status = "okay"; }; i2c@78b7000 { /* BLSP1 QUP2 */ pinctrl-0 = <&i2c_0_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; }; dma@7984000 { - status = "ok"; + status = "okay"; }; qpic-nand@79b0000 { pinctrl-0 = <&nand_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; }; }; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index 74d8e2c8e4b3..7bf1da916f25 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -190,7 +190,7 @@ reg = <0x1800000 0x60000>; }; - rng@22000 { + prng: rng@22000 { compatible = "qcom,prng"; reg = <0x22000 0x140>; clocks = <&gcc GCC_PRNG_AHB_CLK>; @@ -209,6 +209,16 @@ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; }; + vqmmc: regulator@1948000 { + compatible = "qcom,vqmmc-ipq4019-regulator"; + reg = <0x01948000 0x4>; + regulator-name = "vqmmc"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + status = "disabled"; + }; + sdhci: sdhci@7824900 { compatible = "qcom,sdhci-msm-v4"; reg = <0x7824900 0x11c>, <0x7824000 0x800>; @@ -300,7 +310,7 @@ status = "disabled"; }; - crypto@8e3a000 { + crypto: crypto@8e3a000 { compatible = "qcom,crypto-v5.1"; reg = <0x08e3a000 0x6000>; clocks = <&gcc GCC_CRYPTO_AHB_CLK>, @@ -386,7 +396,7 @@ dma-names = "rx", "tx"; }; - watchdog@b017000 { + watchdog: watchdog@b017000 { compatible = "qcom,kpss-wdt", "qcom,kpss-wdt-ipq4019"; reg = <0xb017000 0x40>; clocks = <&sleep_clk>; @@ -605,5 +615,79 @@ reg = <4>; }; }; + + usb3_ss_phy: ssphy@9a000 { + compatible = "qcom,usb-ss-ipq4019-phy"; + #phy-cells = <0>; + reg = <0x9a000 0x800>; + reg-names = "phy_base"; + resets = <&gcc USB3_UNIPHY_PHY_ARES>; + reset-names = "por_rst"; + status = "disabled"; + }; + + usb3_hs_phy: hsphy@a6000 { + compatible = "qcom,usb-hs-ipq4019-phy"; + #phy-cells = <0>; + reg = <0xa6000 0x40>; + reg-names = "phy_base"; + resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>; + reset-names = "por_rst", "srif_rst"; + status = "disabled"; + }; + + usb3: usb3@8af8800 { + compatible = "qcom,dwc3"; + reg = <0x8af8800 0x100>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&gcc GCC_USB3_MASTER_CLK>, + <&gcc GCC_USB3_SLEEP_CLK>, + <&gcc GCC_USB3_MOCK_UTMI_CLK>; + clock-names = "master", "sleep", "mock_utmi"; + ranges; + status = "disabled"; + + dwc3@8a00000 { + compatible = "snps,dwc3"; + reg = <0x8a00000 0xf8000>; + interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb3_hs_phy>, <&usb3_ss_phy>; + phy-names = "usb2-phy", "usb3-phy"; + dr_mode = "host"; + }; + }; + + usb2_hs_phy: hsphy@a8000 { + compatible = "qcom,usb-hs-ipq4019-phy"; + #phy-cells = <0>; + reg = <0xa8000 0x40>; + reg-names = "phy_base"; + resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>; + reset-names = "por_rst", "srif_rst"; + status = "disabled"; + }; + + usb2: usb2@60f8800 { + compatible = "qcom,dwc3"; + reg = <0x60f8800 0x100>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&gcc GCC_USB2_MASTER_CLK>, + <&gcc GCC_USB2_SLEEP_CLK>, + <&gcc GCC_USB2_MOCK_UTMI_CLK>; + clock-names = "master", "sleep", "mock_utmi"; + ranges; + status = "disabled"; + + dwc3@6000000 { + compatible = "snps,dwc3"; + reg = <0x6000000 0xf8000>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2_hs_phy>; + phy-names = "usb2-phy"; + dr_mode = "host"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts index 554c65e7aa0e..e5b9b9cf6097 100644 --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts @@ -24,7 +24,7 @@ gsbi@16300000 { i2c@16380000 { - status = "ok"; + status = "okay"; clock-frequency = <200000>; pinctrl-0 = <&i2c4_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi index e239a0486936..65330065390a 100644 --- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi @@ -16,19 +16,19 @@ soc { gsbi@16300000 { qcom,mode = <GSBI_PROT_I2C_UART>; - status = "ok"; + status = "okay"; serial@16340000 { - status = "ok"; + status = "okay"; }; }; gsbi5: gsbi@1a200000 { qcom,mode = <GSBI_PROT_SPI>; - status = "ok"; + status = "okay"; spi4: spi@1a280000 { - status = "ok"; + status = "okay"; spi-max-frequency = <50000000>; pinctrl-0 = <&spi_pins>; @@ -57,12 +57,12 @@ }; sata-phy@1b400000 { - status = "ok"; + status = "okay"; }; sata@29000000 { ports-implemented = <0x1>; - status = "ok"; + status = "okay"; }; gpio_keys { diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index c51481405e7f..98995ead4413 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -20,7 +20,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; @@ -30,7 +30,7 @@ qcom,saw = <&saw0>; }; - cpu@1 { + cpu1: cpu@1 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; @@ -67,7 +67,7 @@ no-map; }; - smem@41000000 { + smem: smem@41000000 { reg = <0x41000000 0x200000>; no-map; }; @@ -251,7 +251,7 @@ syscon-tcsr = <&tcsr>; - serial@12490000 { + gsbi2_serial: serial@12490000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x12490000 0x1000>, <0x12480000 0x1000>; @@ -273,7 +273,6 @@ #address-cells = <1>; #size-cells = <0>; }; - }; gsbi4: gsbi@16300000 { @@ -326,7 +325,7 @@ syscon-tcsr = <&tcsr>; - serial@1a240000 { + gsbi5_serial: serial@1a240000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x1a240000 0x1000>, <0x1a200000 0x1000>; @@ -386,6 +385,13 @@ }; }; + rng@1a500000 { + compatible = "qcom,prng"; + reg = <0x1a500000 0x200>; + clocks = <&gcc PRNG_CLK>; + clock-names = "core"; + }; + sata_phy: sata-phy@1b400000 { compatible = "qcom,ipq806x-sata-phy"; reg = <0x1b400000 0x200>; @@ -397,7 +403,7 @@ status = "disabled"; }; - sata@29000000 { + sata: sata@29000000 { compatible = "qcom,ipq806x-ahci", "generic-ahci"; reg = <0x29000000 0x180>; @@ -720,7 +726,7 @@ regulator-always-on; }; - sdcc1bam:dma@12402000 { + sdcc1bam: dma@12402000 { compatible = "qcom,bam-v1.3.0"; reg = <0x12402000 0x8000>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; @@ -730,7 +736,7 @@ qcom,ee = <0>; }; - sdcc3bam:dma@12182000 { + sdcc3bam: dma@12182000 { compatible = "qcom,bam-v1.3.0"; reg = <0x12182000 0x8000>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; @@ -740,13 +746,13 @@ qcom,ee = <0>; }; - amba { + amba: amba { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; - sdcc@12400000 { + sdcc1: sdcc@12400000 { status = "disabled"; compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; @@ -766,7 +772,7 @@ dma-names = "tx", "rx"; }; - sdcc@12180000 { + sdcc3: sdcc@12180000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00051180>; status = "disabled"; @@ -779,7 +785,6 @@ cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <192000000>; - #mmc-ddr-1_8v; sd-uhs-sdr104; sd-uhs-ddr50; vqmmc-supply = <&vsdcc_fixed>; diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi index 26b034bd19d2..a725b73b5a2e 100644 --- a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi @@ -125,12 +125,12 @@ }; &gsbi3 { - status = "ok"; + status = "okay"; qcom,mode = <GSBI_PROT_SPI>; }; &gsbi3_spi { - status = "ok"; + status = "okay"; pinctrl-0 = <&gsbi3_pins>; pinctrl-names = "default"; assigned-clocks = <&gcc GSBI3_QUP_CLK>; @@ -138,34 +138,34 @@ }; &gsbi4 { - status = "ok"; + status = "okay"; qcom,mode = <GSBI_PROT_UART_W_FC>; }; &gsbi4_serial { - status = "ok"; + status = "okay"; pinctrl-0 = <&gsbi4_pins>; pinctrl-names = "default"; }; &gsbi5 { - status = "ok"; + status = "okay"; qcom,mode = <GSBI_PROT_I2C_UART>; }; &gsbi5_i2c { - status = "ok"; + status = "okay"; clock-frequency = <200000>; pinctrl-0 = <&gsbi5_i2c_pins>; pinctrl-names = "default"; }; &gsbi5_serial { - status = "ok"; + status = "okay"; pinctrl-0 = <&gsbi5_uart_pins>; pinctrl-names = "default"; }; &sdcc1 { - status = "ok"; + status = "okay"; }; diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts index f01a11b18d6a..6a321ccb0bd0 100644 --- a/arch/arm/boot/dts/qcom-msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts @@ -17,10 +17,10 @@ soc { gsbi@19c00000 { - status = "ok"; + status = "okay"; qcom,mode = <GSBI_PROT_I2C_UART>; serial@19c40000 { - status = "ok"; + status = "okay"; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts index 82d5d8267adf..e7d2e937ea4c 100644 --- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts @@ -17,10 +17,10 @@ soc { gsbi@16400000 { - status = "ok"; + status = "okay"; qcom,mode = <GSBI_PROT_I2C_UART>; serial@16440000 { - status = "ok"; + status = "okay"; }; }; @@ -273,12 +273,12 @@ }; gsbi@16000000 { - status = "ok"; + status = "okay"; qcom,mode = <GSBI_PROT_SPI>; pinctrl-names = "default"; pinctrl-0 = <&spi1_default>; spi@16080000 { - status = "ok"; + status = "okay"; eth@0 { compatible = "micrel,ks8851"; reg = <0>; diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts index d2d48770ec0f..ea15b645b229 100644 --- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts +++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts @@ -256,11 +256,11 @@ &soc { serial@f991e000 { - status = "ok"; + status = "okay"; }; remoteproc@fb21b000 { - status = "ok"; + status = "okay"; vddmx-supply = <&pm8841_s1>; vddcx-supply = <&pm8841_s2>; @@ -273,7 +273,7 @@ label = "pronto"; wcnss { - status = "ok"; + status = "okay"; }; }; }; @@ -335,7 +335,7 @@ }; sdhci@f9824900 { - status = "ok"; + status = "okay"; vmmc-supply = <&pm8941_l20>; vqmmc-supply = <&pm8941_s3>; @@ -348,7 +348,7 @@ }; sdhci@f98a4900 { - status = "ok"; + status = "okay"; vmmc-supply = <&pm8941_l21>; vqmmc-supply = <&pm8941_l13>; @@ -360,7 +360,7 @@ }; usb@f9a55000 { - status = "ok"; + status = "okay"; phys = <&usb_hs1_phy>; phy-select = <&tcsr 0xb000 0>; @@ -373,7 +373,7 @@ ulpi { phy@a { - status = "ok"; + status = "okay"; v1p8-supply = <&pm8941_l6>; v3p3-supply = <&pm8941_l24>; diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index e769f638f205..0cda654371ae 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -239,7 +239,7 @@ &soc { serial@f991d000 { - status = "ok"; + status = "okay"; }; pinctrl@fd510000 { @@ -410,7 +410,7 @@ }; sdhci@f9824900 { - status = "ok"; + status = "okay"; vmmc-supply = <&pm8941_l20>; vqmmc-supply = <&pm8941_s3>; @@ -423,7 +423,7 @@ }; sdhci@f98a4900 { - status = "ok"; + status = "okay"; max-frequency = <100000000>; bus-width = <4>; @@ -471,7 +471,7 @@ }; serial@f9960000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&blsp2_uart10_pin_a>; @@ -490,7 +490,7 @@ }; i2c@f9967000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c11_pins>; clock-frequency = <355000>; @@ -498,7 +498,7 @@ led-controller@38 { compatible = "ti,lm3630a"; - status = "ok"; + status = "okay"; reg = <0x38>; #address-cells = <1>; @@ -514,7 +514,7 @@ }; i2c@f9968000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c12_pins>; clock-frequency = <100000>; @@ -551,7 +551,7 @@ }; i2c@f9923000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; clock-frequency = <100000>; @@ -585,7 +585,7 @@ }; i2c@f9924000 { - status = "ok"; + status = "okay"; clock-frequency = <355000>; qcom,src-freq = <50000000>; @@ -620,7 +620,7 @@ }; i2c@f9925000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c3_pins>; clock-frequency = <100000>; @@ -638,7 +638,7 @@ }; usb@f9a55000 { - status = "ok"; + status = "okay"; phys = <&usb_hs1_phy>; phy-select = <&tcsr 0xb000 0>; @@ -652,7 +652,7 @@ ulpi { phy@a { - status = "ok"; + status = "okay"; v1p8-supply = <&pm8941_l6>; v3p3-supply = <&pm8941_l24>; @@ -663,14 +663,14 @@ }; mdss@fd900000 { - status = "ok"; + status = "okay"; mdp@fd900000 { - status = "ok"; + status = "okay"; }; dsi@fd922800 { - status = "ok"; + status = "okay"; vdda-supply = <&pm8941_l2>; vdd-supply = <&pm8941_lvs3>; @@ -704,7 +704,7 @@ }; dsi-phy@fd922a00 { - status = "ok"; + status = "okay"; vddio-supply = <&pm8941_l12>; }; diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts index 97352de91314..a0f7f461f48c 100644 --- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts +++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts @@ -12,8 +12,8 @@ aliases { serial0 = &blsp1_uart1; - sdhc1 = &sdhc_1; /* SDC1 eMMC slot */ - sdhc2 = &sdhc_2; /* SDC2 SD card slot */ + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ }; chosen { @@ -30,6 +30,7 @@ pma8084_s1: s1 { regulator-min-microvolt = <675000>; regulator-max-microvolt = <1050000>; + regulator-always-on; }; pma8084_s2: s2 { @@ -115,6 +116,7 @@ pma8084_l12: l12 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; }; pma8084_l13: l13 { @@ -298,12 +300,26 @@ enable-active-high; }; + vreg_panel: panel-regulator { + compatible = "regulator-fixed"; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_en_pin>; + + regulator-name = "panel-vddr-reg"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + + gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + /delete-node/ vreg-boost; }; &soc { serial@f991e000 { - status = "ok"; + status = "okay"; }; gpio-keys { @@ -453,10 +469,20 @@ bias-pull-down; }; }; + + panel_te_pin: panel { + te { + pins = "gpio12"; + function = "mdp_vsync"; + + drive-strength = <2>; + bias-disable; + }; + }; }; sdhc_1: sdhci@f9824900 { - status = "ok"; + status = "okay"; vmmc-supply = <&pma8084_l20>; vqmmc-supply = <&pma8084_s4>; @@ -469,7 +495,7 @@ }; sdhc_2: sdhci@f9864900 { - status = "ok"; + status = "okay"; max-frequency = <100000000>; @@ -518,7 +544,7 @@ }; usb@f9a55000 { - status = "ok"; + status = "okay"; phys = <&usb_hs1_phy>; phy-select = <&tcsr 0xb000 0>; @@ -531,7 +557,7 @@ ulpi { phy@a { - status = "ok"; + status = "okay"; v1p8-supply = <&pma8084_l6>; v3p3-supply = <&pma8084_l24>; @@ -697,6 +723,64 @@ pinctrl-0 = <&fuelgauge_pin>; }; }; + + adreno@fdb00000 { + status = "ok"; + }; + + mdss@fd900000 { + status = "ok"; + + mdp@fd900000 { + status = "ok"; + }; + + dsi@fd922800 { + status = "ok"; + + vdda-supply = <&pma8084_l2>; + vdd-supply = <&pma8084_l22>; + vddio-supply = <&pma8084_l12>; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + port@1 { + endpoint { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; + + panel: panel@0 { + reg = <0>; + compatible = "samsung,s6e3fa2"; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_te_pin &panel_rst_pin>; + + iovdd-supply = <&pma8084_lvs4>; + vddr-supply = <&vreg_panel>; + + reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>; + te-gpios = <&msmgpio 12 GPIO_ACTIVE_HIGH>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; + + dsi-phy@fd922a00 { + status = "ok"; + + vddio-supply = <&pma8084_l12>; + }; + }; }; &spmi_bus { @@ -726,6 +810,14 @@ power-source = <PMA8084_GPIO_S4>; }; + panel_en_pin: panel-en-pin { + pins = "gpio14"; + function = "normal"; + bias-pull-up; + power-source = <PMA8084_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; + wlan_sleep_clk_pin: wlan-sleep-clk-pin { pins = "gpio16"; function = "func2"; @@ -735,6 +827,15 @@ qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; }; + panel_rst_pin: panel-rst-pin { + pins = "gpio17"; + function = "normal"; + bias-disable; + power-source = <PMA8084_GPIO_S4>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + }; + + fuelgauge_pin: fuelgauge-int-pin { pins = "gpio21"; function = "normal"; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts index 5669f5f58a86..398a3eaf306b 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts @@ -261,7 +261,7 @@ &soc { sdhci@f9824900 { - status = "ok"; + status = "okay"; vmmc-supply = <&pm8941_l20>; vqmmc-supply = <&pm8941_s3>; @@ -274,7 +274,7 @@ }; sdhci@f98a4900 { - status = "ok"; + status = "okay"; bus-width = <4>; @@ -288,7 +288,7 @@ }; serial@f991e000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_uart2_pin_a>; @@ -366,7 +366,7 @@ }; usb@f9a55000 { - status = "ok"; + status = "okay"; phys = <&usb_hs1_phy>; phy-select = <&tcsr 0xb000 0>; @@ -379,7 +379,7 @@ ulpi { phy@a { - status = "ok"; + status = "okay"; v1p8-supply = <&pm8941_l6>; v3p3-supply = <&pm8941_l24>; @@ -415,7 +415,7 @@ }; coincell@2800 { - status = "ok"; + status = "okay"; qcom,rset-ohms = <2100>; qcom,vset-millivolts = <3000>; }; @@ -423,7 +423,7 @@ pm8941@1 { wled@d800 { - status = "ok"; + status = "okay"; qcom,cs-out; qcom,current-limit = <20>; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts index 701b396719c7..f4ec08f13003 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts @@ -279,7 +279,7 @@ &soc { sdhci@f9824900 { - status = "ok"; + status = "okay"; vmmc-supply = <&pm8941_l20>; vqmmc-supply = <&pm8941_s3>; @@ -292,7 +292,7 @@ }; sdhci@f9864900 { - status = "ok"; + status = "okay"; max-frequency = <100000000>; non-removable; @@ -316,7 +316,7 @@ }; sdhci@f98a4900 { - status = "ok"; + status = "okay"; bus-width = <4>; @@ -330,14 +330,14 @@ }; serial@f991e000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_uart2_pin_a>; }; usb@f9a55000 { - status = "ok"; + status = "okay"; phys = <&usb_hs1_phy>; phy-select = <&tcsr 0xb000 0>; @@ -350,7 +350,7 @@ ulpi { phy@a { - status = "ok"; + status = "okay"; v1p8-supply = <&pm8941_l6>; v3p3-supply = <&pm8941_l24>; @@ -482,7 +482,7 @@ }; i2c@f9964000 { - status = "ok"; + status = "okay"; clock-frequency = <355000>; qcom,src-freq = <50000000>; @@ -522,7 +522,7 @@ }; i2c@f9967000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c11_pins>; clock-frequency = <355000>; @@ -635,7 +635,7 @@ }; coincell@2800 { - status = "ok"; + status = "okay"; qcom,rset-ohms = <2100>; qcom,vset-millivolts = <3000>; }; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts index 611bae9fe66b..9743beebd84d 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts @@ -261,7 +261,7 @@ &soc { usb@f9a55000 { - status = "ok"; + status = "okay"; phys = <&usb_hs1_phy>; phy-select = <&tcsr 0xb000 0>; @@ -274,7 +274,7 @@ ulpi { phy@a { - status = "ok"; + status = "okay"; v1p8-supply = <&pm8941_l6>; v3p3-supply = <&pm8941_l24>; @@ -286,7 +286,7 @@ }; sdhci@f9824900 { - status = "ok"; + status = "okay"; vmmc-supply = <&pm8941_l20>; vqmmc-supply = <&pm8941_s3>; @@ -299,7 +299,7 @@ }; sdhci@f98a4900 { - status = "ok"; + status = "okay"; bus-width = <4>; @@ -313,14 +313,14 @@ }; serial@f991e000 { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&blsp1_uart2_pin_a>; }; i2c@f9924000 { - status = "ok"; + status = "okay"; clock-frequency = <355000>; qcom,src-freq = <50000000>; @@ -464,7 +464,7 @@ }; coincell@2800 { - status = "ok"; + status = "okay"; qcom,rset-ohms = <2100>; qcom,vset-millivolts = <3000>; }; @@ -472,7 +472,7 @@ pm8941@1 { wled@d800 { - status = "ok"; + status = "okay"; qcom,cs-out; qcom,current-limit = <20>; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 51f5f904f9eb..c65d33591efa 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -1399,6 +1399,49 @@ <&rpmcc RPM_SMD_CNOC_A_CLK>; }; + gpu: adreno@fdb00000 { + status = "disabled"; + + compatible = "qcom,adreno-330.1", + "qcom,adreno"; + reg = <0xfdb00000 0x10000>; + reg-names = "kgsl_3d0_reg_memory"; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "kgsl_3d0_irq"; + clock-names = "core", + "iface", + "mem_iface"; + clocks = <&mmcc OXILI_GFX3D_CLK>, + <&mmcc OXILICX_AHB_CLK>, + <&mmcc OXILICX_AXI_CLK>; + sram = <&gmu_sram>; + power-domains = <&mmcc OXILICX_GDSC>; + operating-points-v2 = <&gpu_opp_table>; + + interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>, + <&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>; + interconnect-names = "gfx-mem", + "ocmem"; + + // iommus = <&gpu_iommu 0>; + + gpu_opp_table: opp_table { + compatible = "operating-points-v2"; + + opp-320000000 { + opp-hz = /bits/ 64 <320000000>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + }; + + opp-27000000 { + opp-hz = /bits/ 64 <27000000>; + }; + }; + }; + mdss: mdss@fd900000 { status = "disabled"; diff --git a/arch/arm/boot/dts/qcom-msm8974pro.dtsi b/arch/arm/boot/dts/qcom-msm8974pro.dtsi index 6740a4cb7da8..b64c28036dd0 100644 --- a/arch/arm/boot/dts/qcom-msm8974pro.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974pro.dtsi @@ -14,5 +14,10 @@ clock-controller@fc400000 { compatible = "qcom,gcc-msm8974pro"; }; + + adreno@fdb00000 { + compatible = "qcom,adreno-330.2", + "qcom,adreno"; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-pmx55.dtsi b/arch/arm/boot/dts/qcom-pmx55.dtsi new file mode 100644 index 000000000000..6571b88d018a --- /dev/null +++ b/arch/arm/boot/dts/qcom-pmx55.dtsi @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: BSD-3-Clause + +/* + * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved. + * Copyright (c) 2020, Linaro Limited + */ + +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmic@8 { + compatible = "qcom,pmx55", "qcom,spmi-pmic"; + reg = <0x8 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + power-on@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + + status = "disabled"; + }; + + pmx55_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x8 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pmx55_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pmx55_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x8 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + ref-gnd@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + die-temp@6 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + + chg-temp@9 { + reg = <ADC5_CHG_TEMP>; + qcom,pre-scaling = <1 1>; + label = "chg_temp"; + }; + }; + + pmx55_gpios: gpio@c000 { + compatible = "qcom,pmx55-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@9 { + compatible = "qcom,pmx55", "qcom,spmi-pmic"; + reg = <0x9 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm/boot/dts/qcom-sdx55-mtp.dts b/arch/arm/boot/dts/qcom-sdx55-mtp.dts new file mode 100644 index 000000000000..9649c1e11311 --- /dev/null +++ b/arch/arm/boot/dts/qcom-sdx55-mtp.dts @@ -0,0 +1,251 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved. + * Copyright (c) 2020, Linaro Ltd. + */ + +/dts-v1/; + +#include "qcom-sdx55.dtsi" +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <arm64/qcom/pm8150b.dtsi> +#include "qcom-pmx55.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SDX55 MTP"; + compatible = "qcom,sdx55-mtp", "qcom,sdx55"; + qcom,board-id = <0x5010008 0x0>; + + aliases { + serial0 = &blsp1_uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mpss_debug_mem: memory@8ef00000 { + no-map; + reg = <0x8ef00000 0x800000>; + }; + + ipa_fw_mem: memory@8fced000 { + no-map; + reg = <0x8fced000 0x10000>; + }; + + mpss_adsp_mem: memory@90c00000 { + no-map; + reg = <0x90c00000 0xd400000>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_bob_3p3: pmx55-bob { + compatible = "regulator-fixed"; + regulator-name = "vreg_bob_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + vreg_s7e_mx_0p752: pmx55-s7e { + compatible = "regulator-fixed"; + regulator-name = "vreg_s7e_mx_0p752"; + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + + vin-supply = <&vph_pwr>; + }; +}; + +&apps_rsc { + pmx55-rpmh-regulators { + compatible = "qcom,pmx55-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-l1-l2-supply = <&vreg_s2e_1p224>; + vdd-l3-l9-supply = <&vreg_s3e_0p824>; + vdd-l4-l12-supply = <&vreg_s4e_1p904>; + vdd-l5-l6-supply = <&vreg_s4e_1p904>; + vdd-l7-l8-supply = <&vreg_s3e_0p824>; + vdd-l10-l11-l13-supply = <&vreg_bob_3p3>; + vdd-l14-supply = <&vreg_s7e_mx_0p752>; + vdd-l15-supply = <&vreg_s2e_1p224>; + vdd-l16-supply = <&vreg_s4e_1p904>; + + vreg_s2e_1p224: smps2 { + regulator-min-microvolt = <1280000>; + regulator-max-microvolt = <1400000>; + }; + + vreg_s3e_0p824: smps3 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_s4e_1p904: smps4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1960000>; + }; + + vreg_l1e_bb_1p2: ldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo2 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo3 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l4e_bb_0p875: ldo4 { + regulator-min-microvolt = <872000>; + regulator-max-microvolt = <872000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l5e_bb_1p7: ldo5 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo7 { + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo8 { + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo9 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l10e_3p1: ldo10 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo11 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo12 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo13 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo14 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo15 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo16 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + }; +}; + +&blsp1_uart3 { + status = "okay"; +}; + +&qpic_bam { + status = "okay"; +}; + +&qpic_nand { + status = "okay"; + + nand@0 { + reg = <0>; + + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + nand-bus-width = <8>; + }; +}; + +&usb { + status = "okay"; +}; + +&usb_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_hsphy { + status = "okay"; + vdda-pll-supply = <&vreg_l4e_bb_0p875>; + vdda33-supply = <&vreg_l10e_3p1>; + vdda18-supply = <&vreg_l5e_bb_1p7>; +}; + +&usb_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l4e_bb_0p875>; + vdda-pll-supply = <&vreg_l1e_bb_1p2>; +}; diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi new file mode 100644 index 000000000000..e4180bbc4655 --- /dev/null +++ b/arch/arm/boot/dts/qcom-sdx55.dtsi @@ -0,0 +1,505 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * SDX55 SoC device tree source + * + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + * Copyright (c) 2020, Linaro Ltd. + */ + +#include <dt-bindings/clock/qcom,gcc-sdx55.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + qcom,msm-id = <357 0x10000>, <368 0x10000>, <418 0x10000>; + interrupt-parent = <&intc>; + + memory { + device_type = "memory"; + reg = <0 0>; + }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32000>; + }; + + nand_clk_dummy: nand-clk-dummy { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32000>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + hyp_mem: memory@8fc00000 { + no-map; + reg = <0x8fc00000 0x80000>; + }; + + ac_db_mem: memory@8fc80000 { + no-map; + reg = <0x8fc80000 0x40000>; + }; + + secdata_mem: memory@8fcfd000 { + no-map; + reg = <0x8fcfd000 0x1000>; + }; + + sbl_mem: memory@8fd00000 { + no-map; + reg = <0x8fd00000 0x100000>; + }; + + aop_image: memory@8fe00000 { + no-map; + reg = <0x8fe00000 0x20000>; + }; + + aop_cmd_db: memory@8fe20000 { + compatible = "qcom,cmd-db"; + reg = <0x8fe20000 0x20000>; + no-map; + }; + + smem_mem: memory@8fe40000 { + no-map; + reg = <0x8fe40000 0xc0000>; + }; + + tz_mem: memory@8ff00000 { + no-map; + reg = <0x8ff00000 0x100000>; + }; + + tz_apps_mem: memory@0x90000000 { + no-map; + reg = <0x90000000 0x500000>; + }; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sdx55"; + reg = <0x100000 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "bi_tcxo", "sleep_clk"; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>; + }; + + blsp1_uart3: serial@831000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x00831000 0x200>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_LOW>; + clocks = <&gcc 30>, + <&gcc 9>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + usb_hsphy: phy@ff4000 { + compatible = "qcom,usb-snps-hs-7nm-phy"; + reg = <0x00ff4000 0x114>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_BCR>; + }; + + usb_qmpphy: phy@ff6000 { + compatible = "qcom,sdx55-qmp-usb3-uni-phy"; + reg = <0x00ff6000 0x1c0>; + status = "disabled"; + #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_USB3PHY_PHY_BCR>, + <&gcc GCC_USB3_PHY_BCR>; + reset-names = "phy", "common"; + + usb_ssphy: phy@ff6200 { + reg = <0x00ff6200 0x170>, + <0x00ff6400 0x200>, + <0x00ff6800 0x800>; + #phy-cells = <0>; + #clock-cells = <0>; + clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + }; + }; + + qpic_bam: dma-controller@1b04000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x01b04000 0x1c000>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rpmhcc RPMH_QPIC_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + status = "disabled"; + }; + + qpic_nand: nand@1b30000 { + compatible = "qcom,sdx55-nand"; + reg = <0x01b30000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&rpmhcc RPMH_QPIC_CLK>, + <&nand_clk_dummy>; + clock-names = "core", "aon"; + + dmas = <&qpic_bam 0>, + <&qpic_bam 1>, + <&qpic_bam 2>; + dma-names = "tx", "rx", "cmd"; + status = "disabled"; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01f40000 0x40000>; + #hwlock-cells = <1>; + }; + + sdhc_1: sdhci@8804000 { + compatible = "qcom,sdx55-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x08804000 0x1000>; + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>; + clock-names = "iface", "core"; + status = "disabled"; + }; + + usb: usb@a6f8800 { + compatible = "qcom,sdx55-dwc3", "qcom,dwc3"; + reg = <0x0a6f8800 0x400>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB30_SLV_AHB_CLK>, + <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_USB30_MSTR_AXI_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep"; + + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_GDSC>; + + resets = <&gcc GCC_USB30_BCR>; + + usb_dwc3: dwc3@a600000 { + compatible = "snps,dwc3"; + reg = <0x0a600000 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x1a0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_hsphy>, <&usb_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + pdc: interrupt-controller@b210000 { + compatible = "qcom,sdx55-pdc", "qcom,pdc"; + reg = <0x0b210000 0x30000>; + qcom,pdc-ranges = <0 179 52>; + #interrupt-cells = <3>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + restart@c264000 { + compatible = "qcom,pshold"; + reg = <0x0c264000 0x1000>; + }; + + spmi_bus: qcom,spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0c440000 0x0000d00>, + <0x0c600000 0x2000000>, + <0x0e600000 0x0100000>, + <0x0e700000 0x00a0000>, + <0x0c40a000 0x0000700>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sdx55-pinctrl"; + reg = <0xf100000 0x300000>; + interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sdx55-smmu-500", "arm,mmu-500"; + reg = <0x15000000 0x20000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + }; + + intc: interrupt-controller@17800000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + interrupt-parent = <&intc>; + #interrupt-cells = <3>; + reg = <0x17800000 0x1000>, + <0x17802000 0x1000>; + }; + + watchdog@17817000 { + compatible = "qcom,apss-wdt-sdx55", "qcom,kpss-wdt"; + reg = <0x17817000 0x1000>; + clocks = <&sleep_clk>; + }; + + timer@17820000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x17820000 0x1000>; + clock-frequency = <19200000>; + + frame@17821000 { + frame-number = <0>; + interrupts = <GIC_SPI 7 0x4>, + <GIC_SPI 6 0x4>; + reg = <0x17821000 0x1000>, + <0x17822000 0x1000>; + }; + + frame@17823000 { + frame-number = <1>; + interrupts = <GIC_SPI 8 0x4>; + reg = <0x17823000 0x1000>; + status = "disabled"; + }; + + frame@17824000 { + frame-number = <2>; + interrupts = <GIC_SPI 9 0x4>; + reg = <0x17824000 0x1000>; + status = "disabled"; + }; + + frame@17825000 { + frame-number = <3>; + interrupts = <GIC_SPI 10 0x4>; + reg = <0x17825000 0x1000>; + status = "disabled"; + }; + + frame@17826000 { + frame-number = <4>; + interrupts = <GIC_SPI 11 0x4>; + reg = <0x17826000 0x1000>; + status = "disabled"; + }; + + frame@17827000 { + frame-number = <5>; + interrupts = <GIC_SPI 12 0x4>; + reg = <0x17827000 0x1000>; + status = "disabled"; + }; + + frame@17828000 { + frame-number = <6>; + interrupts = <GIC_SPI 13 0x4>; + reg = <0x17828000 0x1000>; + status = "disabled"; + }; + + frame@17829000 { + frame-number = <7>; + interrupts = <GIC_SPI 14 0x4>; + reg = <0x17829000 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@17840000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x17830000 0x10000>, <0x17840000 0x10000>; + reg-names = "drv-0", "drv-1"; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <1>; + qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 2>, + <WAKE_TCS 2>, <CONTROL_TCS 1>; + + rpmhcc: clock-controller { + compatible = "qcom,sdx55-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sdx55-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <19200000>; + }; +}; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index 093567022386..47a787a12e55 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -54,25 +54,6 @@ }; }; - amba: bus { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - pdma: pdma@20078000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x20078000 0x4000>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - arm,pl330-broken-no-flushp; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC2>; - clock-names = "apb_pclk"; - }; - }; - arm-pmu { compatible = "arm,cortex-a7-pmu"; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, @@ -292,6 +273,21 @@ status = "disabled"; }; + nfc: nand-controller@10500000 { + compatible = "rockchip,rk3036-nfc", + "rockchip,rk2928-nfc"; + reg = <0x10500000 0x4000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>; + clock-names = "ahb", "nfc"; + assigned-clocks = <&cru SCLK_NANDC>; + assigned-clock-rates = <150000000>; + pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_csn0 + &flash_rdn &flash_rdy &flash_wrn>; + pinctrl-names = "default"; + status = "disabled"; + }; + cru: clock-controller@20000000 { compatible = "rockchip,rk3036-cru"; reg = <0x20000000 0x1000>; @@ -494,6 +490,18 @@ status = "disabled"; }; + pdma: pdma@20078000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x20078000 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC2>; + clock-names = "apb_pclk"; + }; + pinctrl: pinctrl { compatible = "rockchip,rk3036-pinctrl"; rockchip,grf = <&grf>; @@ -643,6 +651,43 @@ }; }; + nfc { + flash_ale: flash-ale { + rockchip,pins = <2 RK_PA0 1 &pcfg_pull_default>; + }; + + flash_bus8: flash-bus8 { + rockchip,pins = <1 RK_PD0 1 &pcfg_pull_default>, + <1 RK_PD1 1 &pcfg_pull_default>, + <1 RK_PD2 1 &pcfg_pull_default>, + <1 RK_PD3 1 &pcfg_pull_default>, + <1 RK_PD4 1 &pcfg_pull_default>, + <1 RK_PD5 1 &pcfg_pull_default>, + <1 RK_PD6 1 &pcfg_pull_default>, + <1 RK_PD7 1 &pcfg_pull_default>; + }; + + flash_cle: flash-cle { + rockchip,pins = <2 RK_PA1 1 &pcfg_pull_default>; + }; + + flash_csn0: flash-csn0 { + rockchip,pins = <2 RK_PA6 1 &pcfg_pull_default>; + }; + + flash_rdn: flash-rdn { + rockchip,pins = <2 RK_PA3 1 &pcfg_pull_default>; + }; + + flash_rdy: flash-rdy { + rockchip,pins = <2 RK_PA4 1 &pcfg_pull_default>; + }; + + flash_wrn: flash-wrn { + rockchip,pins = <2 RK_PA2 1 &pcfg_pull_default>; + }; + }; + emac { emac_xfer: emac-xfer { rockchip,pins = <2 RK_PB2 1 &pcfg_pull_default>, /* crs_dvalid */ diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 48e6e8d44a1a..a4dd50aaf3fc 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -14,6 +14,9 @@ interrupt-parent = <&gic>; aliases { + mmc0 = &sdmmc; + mmc1 = &sdio; + mmc2 = &emmc; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -95,24 +98,6 @@ }; }; - amba: bus { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - pdma: pdma@110f0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x110f0000 0x4000>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC>; - clock-names = "apb_pclk"; - }; - }; - arm-pmu { compatible = "arm,cortex-a7-pmu"; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, @@ -464,6 +449,17 @@ <75000000>; }; + pdma: pdma@110f0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x110f0000 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC>; + clock-names = "apb_pclk"; + }; + thermal-zones { cpu_thermal: cpu-thermal { polling-delay-passive = <100>; /* milliseconds */ diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts index cf54d5ffff2f..713f55e143c6 100644 --- a/arch/arm/boot/dts/rk3288-miqi.dts +++ b/arch/arm/boot/dts/rk3288-miqi.dts @@ -123,6 +123,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &hdmi { ddc-i2c-bus = <&i2c5>; status = "okay"; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 68d5a58cfe88..ea7416c31f9b 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -154,50 +154,6 @@ }; }; - amba: bus { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - dmac_peri: dma-controller@ff250000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xff250000 0x0 0x4000>; - interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - arm,pl330-broken-no-flushp; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC2>; - clock-names = "apb_pclk"; - }; - - dmac_bus_ns: dma-controller@ff600000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xff600000 0x0 0x4000>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - arm,pl330-broken-no-flushp; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC1>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - - dmac_bus_s: dma-controller@ffb20000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xffb20000 0x0 0x4000>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - arm,pl330-broken-no-flushp; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC1>; - clock-names = "apb_pclk"; - }; - }; - reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -487,15 +443,27 @@ status = "disabled"; }; + dmac_peri: dma-controller@ff250000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff250000 0x0 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC2>; + clock-names = "apb_pclk"; + }; + thermal-zones { - reserve_thermal: reserve_thermal { + reserve_thermal: reserve-thermal { polling-delay-passive = <1000>; /* milliseconds */ polling-delay = <5000>; /* milliseconds */ thermal-sensors = <&tsadc 0>; }; - cpu_thermal: cpu_thermal { + cpu_thermal: cpu-thermal { polling-delay-passive = <100>; /* milliseconds */ polling-delay = <5000>; /* milliseconds */ @@ -539,7 +507,7 @@ }; }; - gpu_thermal: gpu_thermal { + gpu_thermal: gpu-thermal { polling-delay-passive = <100>; /* milliseconds */ polling-delay = <5000>; /* milliseconds */ @@ -665,6 +633,19 @@ status = "disabled"; }; + dmac_bus_ns: dma-controller@ff600000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff600000 0x0 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC1>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + i2c0: i2c@ff650000 { compatible = "rockchip,rk3288-i2c"; reg = <0x0 0xff650000 0x0 0x1000>; @@ -1329,75 +1310,87 @@ }; qos_gpu_r: qos@ffaa0000 { - compatible = "syscon"; + compatible = "rockchip,rk3288-qos", "syscon"; reg = <0x0 0xffaa0000 0x0 0x20>; }; qos_gpu_w: qos@ffaa0080 { - compatible = "syscon"; + compatible = "rockchip,rk3288-qos", "syscon"; reg = <0x0 0xffaa0080 0x0 0x20>; }; qos_vio1_vop: qos@ffad0000 { - compatible = "syscon"; + compatible = "rockchip,rk3288-qos", "syscon"; reg = <0x0 0xffad0000 0x0 0x20>; }; qos_vio1_isp_w0: qos@ffad0100 { - compatible = "syscon"; + compatible = "rockchip,rk3288-qos", "syscon"; reg = <0x0 0xffad0100 0x0 0x20>; }; qos_vio1_isp_w1: qos@ffad0180 { - compatible = "syscon"; + compatible = "rockchip,rk3288-qos", "syscon"; reg = <0x0 0xffad0180 0x0 0x20>; }; qos_vio0_vop: qos@ffad0400 { - compatible = "syscon"; + compatible = "rockchip,rk3288-qos", "syscon"; reg = <0x0 0xffad0400 0x0 0x20>; }; qos_vio0_vip: qos@ffad0480 { - compatible = "syscon"; + compatible = "rockchip,rk3288-qos", "syscon"; reg = <0x0 0xffad0480 0x0 0x20>; }; qos_vio0_iep: qos@ffad0500 { - compatible = "syscon"; + compatible = "rockchip,rk3288-qos", "syscon"; reg = <0x0 0xffad0500 0x0 0x20>; }; qos_vio2_rga_r: qos@ffad0800 { - compatible = "syscon"; + compatible = "rockchip,rk3288-qos", "syscon"; reg = <0x0 0xffad0800 0x0 0x20>; }; qos_vio2_rga_w: qos@ffad0880 { - compatible = "syscon"; + compatible = "rockchip,rk3288-qos", "syscon"; reg = <0x0 0xffad0880 0x0 0x20>; }; qos_vio1_isp_r: qos@ffad0900 { - compatible = "syscon"; + compatible = "rockchip,rk3288-qos", "syscon"; reg = <0x0 0xffad0900 0x0 0x20>; }; qos_video: qos@ffae0000 { - compatible = "syscon"; + compatible = "rockchip,rk3288-qos", "syscon"; reg = <0x0 0xffae0000 0x0 0x20>; }; qos_hevc_r: qos@ffaf0000 { - compatible = "syscon"; + compatible = "rockchip,rk3288-qos", "syscon"; reg = <0x0 0xffaf0000 0x0 0x20>; }; qos_hevc_w: qos@ffaf0080 { - compatible = "syscon"; + compatible = "rockchip,rk3288-qos", "syscon"; reg = <0x0 0xffaf0080 0x0 0x20>; }; + dmac_bus_s: dma-controller@ffb20000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xffb20000 0x0 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC1>; + clock-names = "apb_pclk"; + }; + efuse: efuse@ffb40000 { compatible = "rockchip,rk3288-efuse"; reg = <0x0 0xffb40000 0x0 0x20>; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 859a7477909f..755c946f11de 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -32,50 +32,6 @@ spi1 = &spi1; }; - amba: bus { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - dmac1_s: dma-controller@20018000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x20018000 0x4000>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - arm,pl330-broken-no-flushp; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMA1>; - clock-names = "apb_pclk"; - }; - - dmac1_ns: dma-controller@2001c000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x2001c000 0x4000>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - arm,pl330-broken-no-flushp; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMA1>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - - dmac2: dma-controller@20078000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x20078000 0x4000>; - interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - arm,pl330-broken-no-flushp; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMA2>; - clock-names = "apb_pclk"; - }; - }; - xin24m: oscillator { compatible = "fixed-clock"; clock-frequency = <24000000>; @@ -151,42 +107,42 @@ }; qos_gpu: qos@1012d000 { - compatible = "syscon"; + compatible = "rockchip,rk3066-qos", "syscon"; reg = <0x1012d000 0x20>; }; qos_vpu: qos@1012e000 { - compatible = "syscon"; + compatible = "rockchip,rk3066-qos", "syscon"; reg = <0x1012e000 0x20>; }; qos_lcdc0: qos@1012f000 { - compatible = "syscon"; + compatible = "rockchip,rk3066-qos", "syscon"; reg = <0x1012f000 0x20>; }; qos_cif0: qos@1012f080 { - compatible = "syscon"; + compatible = "rockchip,rk3066-qos", "syscon"; reg = <0x1012f080 0x20>; }; qos_ipp: qos@1012f100 { - compatible = "syscon"; + compatible = "rockchip,rk3066-qos", "syscon"; reg = <0x1012f100 0x20>; }; qos_lcdc1: qos@1012f180 { - compatible = "syscon"; + compatible = "rockchip,rk3066-qos", "syscon"; reg = <0x1012f180 0x20>; }; qos_cif1: qos@1012f200 { - compatible = "syscon"; + compatible = "rockchip,rk3066-qos", "syscon"; reg = <0x1012f200 0x20>; }; qos_rga: qos@1012f280 { - compatible = "syscon"; + compatible = "rockchip,rk3066-qos", "syscon"; reg = <0x1012f280 0x20>; }; @@ -276,6 +232,15 @@ status = "disabled"; }; + nfc: nand-controller@10500000 { + compatible = "rockchip,rk2928-nfc"; + reg = <0x10500000 0x4000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_NANDC0>; + clock-names = "ahb"; + status = "disabled"; + }; + pmu: pmu@20004000 { compatible = "rockchip,rk3066-pmu", "syscon", "simple-mfd"; reg = <0x20004000 0x100>; @@ -295,6 +260,31 @@ reg = <0x20008000 0x200>; }; + dmac1_s: dma-controller@20018000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x20018000 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMA1>; + clock-names = "apb_pclk"; + }; + + dmac1_ns: dma-controller@2001c000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x2001c000 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMA1>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + i2c0: i2c@2002d000 { compatible = "rockchip,rk3066-i2c"; reg = <0x2002d000 0x1000>; @@ -469,4 +459,16 @@ dma-names = "tx", "rx"; status = "disabled"; }; + + dmac2: dma-controller@20078000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x20078000 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMA2>; + clock-names = "apb_pclk"; + }; }; diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi index e491964b1c3d..7319a2473b80 100644 --- a/arch/arm/boot/dts/rv1108.dtsi +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -19,6 +19,9 @@ i2c1 = &i2c1; i2c2 = &i2c2; i2c3 = &i2c3; + mmc0 = &emmc; + mmc1 = &sdio; + mmc2 = &sdmmc; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -452,6 +455,17 @@ #reset-cells = <1>; }; + nfc: nand-controller@30100000 { + compatible = "rockchip,rv1108-nfc"; + reg = <0x30100000 0x1000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>; + clock-names = "ahb", "nfc"; + assigned-clocks = <&cru SCLK_NANDC>; + assigned-clock-rates = <150000000>; + status = "disabled"; + }; + emmc: mmc@30110000 { compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x30110000 0x4000>; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index 0013ec3463c4..a574ea91d9d3 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -15,13 +15,13 @@ #size-cells = <0>; enable-method = "altr,socfpga-a10-smp"; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <0>; next-level-cache = <&L2>; }; - cpu@1 { + cpu1: cpu@1 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <1>; @@ -29,6 +29,15 @@ }; }; + pmu: pmu@ff111000 { + compatible = "arm,cortex-a9-pmu"; + interrupt-parent = <&intc>; + interrupts = <0 124 4>, <0 125 4>; + interrupt-affinity = <&cpu0>, <&cpu1>; + reg = <0xff111000 0x1000>, + <0xff113000 0x1000>; + }; + intc: intc@ffffd000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi index 4c16736ea789..4fd09997a2b9 100644 --- a/arch/arm/boot/dts/ste-ab8500.dtsi +++ b/arch/arm/boot/dts/ste-ab8500.dtsi @@ -122,9 +122,11 @@ ab8500_temp { compatible = "stericsson,abx500-temp"; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ABX500_TEMP_WARM"; io-channels = <&gpadc 0x06>, <&gpadc 0x07>; - io-channel-name = "aux1", "aux2"; + io-channel-names = "aux1", "aux2"; }; ab8500_battery: ab8500_battery { @@ -134,29 +136,77 @@ ab8500_fg { compatible = "stericsson,ab8500-fg"; - battery = <&ab8500_battery>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>, + <8 IRQ_TYPE_LEVEL_HIGH>, + <28 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "NCONV_ACCU", + "BATT_OVV", + "LOW_BAT_F", + "CC_INT_CALIB", + "CCEOC"; + battery = <&ab8500_battery>; io-channels = <&gpadc 0x08>; - io-channel-name = "main_bat_v"; + io-channel-names = "main_bat_v"; }; ab8500_btemp { compatible = "stericsson,ab8500-btemp"; - battery = <&ab8500_battery>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>, + <80 IRQ_TYPE_LEVEL_HIGH>, + <83 IRQ_TYPE_LEVEL_HIGH>, + <81 IRQ_TYPE_LEVEL_HIGH>, + <82 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "BAT_CTRL_INDB", + "BTEMP_LOW", + "BTEMP_HIGH", + "BTEMP_LOW_MEDIUM", + "BTEMP_MEDIUM_HIGH"; + battery = <&ab8500_battery>; io-channels = <&gpadc 0x02>, <&gpadc 0x01>; - io-channel-name = "btemp_ball", + io-channel-names = "btemp_ball", "bat_ctrl"; }; ab8500_charger { - compatible = "stericsson,ab8500-charger"; + compatible = "stericsson,ab8500-charger"; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>, + <11 IRQ_TYPE_LEVEL_HIGH>, + <0 IRQ_TYPE_LEVEL_HIGH>, + <107 IRQ_TYPE_LEVEL_HIGH>, + <106 IRQ_TYPE_LEVEL_HIGH>, + <14 IRQ_TYPE_LEVEL_HIGH>, + <15 IRQ_TYPE_LEVEL_HIGH>, + <79 IRQ_TYPE_LEVEL_HIGH>, + <105 IRQ_TYPE_LEVEL_HIGH>, + <104 IRQ_TYPE_LEVEL_HIGH>, + <89 IRQ_TYPE_LEVEL_HIGH>, + <22 IRQ_TYPE_LEVEL_HIGH>, + <21 IRQ_TYPE_LEVEL_HIGH>, + <16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "MAIN_CH_UNPLUG_DET", + "MAIN_CHARGE_PLUG_DET", + "MAIN_EXT_CH_NOT_OK", + "MAIN_CH_TH_PROT_R", + "MAIN_CH_TH_PROT_F", + "VBUS_DET_F", + "VBUS_DET_R", + "USB_LINK_STATUS", + "USB_CH_TH_PROT_R", + "USB_CH_TH_PROT_F", + "USB_CHARGER_NOT_OKR", + "VBUS_OVV", + "CH_WD_EXP", + "VBUS_CH_DROP_END"; battery = <&ab8500_battery>; vddadc-supply = <&ab8500_ldo_tvout_reg>; io-channels = <&gpadc 0x03>, <&gpadc 0x0a>, <&gpadc 0x09>, <&gpadc 0x0b>; - io-channel-name = "main_charger_v", + io-channel-names = "main_charger_v", "main_charger_c", "vbus_v", "usb_charger_c"; diff --git a/arch/arm/boot/dts/ste-ab8505.dtsi b/arch/arm/boot/dts/ste-ab8505.dtsi index c72aa250bf6f..cc045b2fc217 100644 --- a/arch/arm/boot/dts/ste-ab8505.dtsi +++ b/arch/arm/boot/dts/ste-ab8505.dtsi @@ -13,7 +13,8 @@ <&gpadc 0x08>, /* Main battery voltage */ <&gpadc 0x09>, /* VBUS */ <&gpadc 0x0b>, /* Charger current */ - <&gpadc 0x0c>; /* Backup battery voltage */ + <&gpadc 0x0c>, /* Backup battery voltage */ + <&gpadc 0x0d>; /* Die temperature */ }; soc { @@ -45,9 +46,8 @@ gpadc: ab8500-gpadc { compatible = "stericsson,ab8500-gpadc"; - interrupts = <32 IRQ_TYPE_LEVEL_HIGH - 39 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "HW_CONV_END", "SW_CONV_END"; + interrupts = <39 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "SW_CONV_END"; vddadc-supply = <&ab8500_ldo_adc_reg>; #address-cells = <1>; #size-cells = <0>; @@ -84,42 +84,93 @@ bk_bat_v: channel@0c { reg = <0x0c>; }; + die_temp: channel@0d { + reg = <0x0d>; + }; usb_id: channel@0e { reg = <0x0e>; }; }; ab8500_battery: ab8500_battery { - status = "disabled"; + stericsson,battery-type = "LIPO"; thermistor-on-batctrl; }; ab8500_fg { status = "disabled"; compatible = "stericsson,ab8500-fg"; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>, + <8 IRQ_TYPE_LEVEL_HIGH>, + <28 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "NCONV_ACCU", + "BATT_OVV", + "LOW_BAT_F", + "CC_INT_CALIB", + "CCEOC"; battery = <&ab8500_battery>; io-channels = <&gpadc 0x08>; - io-channel-name = "main_bat_v"; + io-channel-names = "main_bat_v"; }; ab8500_btemp { status = "disabled"; compatible = "stericsson,ab8500-btemp"; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>, + <80 IRQ_TYPE_LEVEL_HIGH>, + <83 IRQ_TYPE_LEVEL_HIGH>, + <81 IRQ_TYPE_LEVEL_HIGH>, + <82 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "BAT_CTRL_INDB", + "BTEMP_LOW", + "BTEMP_HIGH", + "BTEMP_LOW_MEDIUM", + "BTEMP_MEDIUM_HIGH"; battery = <&ab8500_battery>; io-channels = <&gpadc 0x02>, <&gpadc 0x01>; - io-channel-name = "btemp_ball", + io-channel-names = "btemp_ball", "bat_ctrl"; }; ab8500_charger { status = "disabled"; compatible = "stericsson,ab8500-charger"; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>, + <11 IRQ_TYPE_LEVEL_HIGH>, + <0 IRQ_TYPE_LEVEL_HIGH>, + <107 IRQ_TYPE_LEVEL_HIGH>, + <106 IRQ_TYPE_LEVEL_HIGH>, + <14 IRQ_TYPE_LEVEL_HIGH>, + <15 IRQ_TYPE_LEVEL_HIGH>, + <79 IRQ_TYPE_LEVEL_HIGH>, + <105 IRQ_TYPE_LEVEL_HIGH>, + <104 IRQ_TYPE_LEVEL_HIGH>, + <89 IRQ_TYPE_LEVEL_HIGH>, + <22 IRQ_TYPE_LEVEL_HIGH>, + <21 IRQ_TYPE_LEVEL_HIGH>, + <16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "MAIN_CH_UNPLUG_DET", + "MAIN_CHARGE_PLUG_DET", + "MAIN_EXT_CH_NOT_OK", + "MAIN_CH_TH_PROT_R", + "MAIN_CH_TH_PROT_F", + "VBUS_DET_F", + "VBUS_DET_R", + "USB_LINK_STATUS", + "USB_CH_TH_PROT_R", + "USB_CH_TH_PROT_F", + "USB_CHARGER_NOT_OKR", + "VBUS_OVV", + "CH_WD_EXP", + "VBUS_CH_DROP_END"; battery = <&ab8500_battery>; vddadc-supply = <&ab8500_ldo_adc_reg>; io-channels = <&gpadc 0x09>, <&gpadc 0x0b>; - io-channel-name = "vbus_v", + io-channel-names = "vbus_v", "usb_charger_c"; }; diff --git a/arch/arm/boot/dts/ste-db8500.dtsi b/arch/arm/boot/dts/ste-db8500.dtsi index d309fad32229..344d29853bf7 100644 --- a/arch/arm/boot/dts/ste-db8500.dtsi +++ b/arch/arm/boot/dts/ste-db8500.dtsi @@ -12,4 +12,42 @@ 200000 0>; }; }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* Modem trace memory */ + ram@06000000 { + reg = <0x06000000 0x00f00000>; + no-map; + }; + + /* Modem shared memory */ + ram@06f00000 { + reg = <0x06f00000 0x00100000>; + no-map; + }; + + /* Modem private memory */ + ram@07000000 { + reg = <0x07000000 0x01000000>; + no-map; + }; + + /* + * Initial Secure Software ISSW memory + * + * This is probably only used if the kernel tries + * to actually call into trustzone to run secure + * applications, which the mainline kernel probably + * will not do on this old chipset. But you can never + * be too careful, so reserve this memory anyway. + */ + ram@17f00000 { + reg = <0x17f00000 0x00100000>; + no-map; + }; + }; }; diff --git a/arch/arm/boot/dts/ste-db8520.dtsi b/arch/arm/boot/dts/ste-db8520.dtsi index 48bd8728ae27..287804e9e183 100644 --- a/arch/arm/boot/dts/ste-db8520.dtsi +++ b/arch/arm/boot/dts/ste-db8520.dtsi @@ -12,4 +12,42 @@ 200000 0>; }; }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* Modem trace memory */ + ram@06000000 { + reg = <0x06000000 0x00f00000>; + no-map; + }; + + /* Modem shared memory */ + ram@06f00000 { + reg = <0x06f00000 0x00100000>; + no-map; + }; + + /* Modem private memory */ + ram@07000000 { + reg = <0x07000000 0x01000000>; + no-map; + }; + + /* + * Initial Secure Software ISSW memory + * + * This is probably only used if the kernel tries + * to actually call into trustzone to run secure + * applications, which the mainline kernel probably + * will not do on this old chipset. But you can never + * be too careful, so reserve this memory anyway. + */ + ram@17f00000 { + reg = <0x17f00000 0x00100000>; + no-map; + }; + }; }; diff --git a/arch/arm/boot/dts/ste-db9500.dtsi b/arch/arm/boot/dts/ste-db9500.dtsi new file mode 100644 index 000000000000..0afff703191c --- /dev/null +++ b/arch/arm/boot/dts/ste-db9500.dtsi @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "ste-dbx5x0.dtsi" + +/ { + cpus { + cpu@300 { + /* cpufreq controls */ + operating-points = <1152000 0 + 800000 0 + 400000 0 + 200000 0>; + }; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* + * Initial Secure Software ISSW memory + * + * This is probably only used if the kernel tries + * to actually call into trustzone to run secure + * applications, which the mainline kernel probably + * will not do on this old chipset. But you can never + * be too careful, so reserve this memory anyway. + */ + ram@17f00000 { + reg = <0x17f00000 0x00100000>; + no-map; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index 404b9c4a5fee..68607e4ad80c 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -883,7 +883,7 @@ status = "disabled"; }; - sdi0_per1@80126000 { + mmc@80126000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80126000 0x1000>; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; @@ -899,7 +899,7 @@ status = "disabled"; }; - sdi1_per2@80118000 { + mmc@80118000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80118000 0x1000>; interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; @@ -915,7 +915,7 @@ status = "disabled"; }; - sdi2_per3@80005000 { + mmc@80005000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80005000 0x1000>; interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; @@ -931,7 +931,7 @@ status = "disabled"; }; - sdi3_per2@80119000 { + mmc@80119000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80119000 0x1000>; interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; @@ -947,7 +947,7 @@ status = "disabled"; }; - sdi4_per2@80114000 { + mmc@80114000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80114000 0x1000>; interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; @@ -963,7 +963,7 @@ status = "disabled"; }; - sdi5_per3@80008000 { + mmc@80008000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80008000 0x1000>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index ff47cbf6ed3b..83b179692dff 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -113,23 +113,8 @@ status = "okay"; }; - /* ST6G3244ME level translator for 1.8/2.9 V */ - vmmci: regulator-gpio { - compatible = "regulator-gpio"; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2900000>; - regulator-name = "mmci-reg"; - regulator-type = "voltage"; - - startup-delay-us = <100>; - - states = <1800000 0x1 - 2900000 0x0>; - }; - // External Micro SD slot - sdi0_per1@80126000 { + mmc@80126000 { arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <4>; @@ -152,7 +137,7 @@ }; // WLAN SDIO channel - sdi1_per2@80118000 { + mmc@80118000 { arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <4>; @@ -165,7 +150,7 @@ }; // PoP:ed eMMC - sdi2_per3@80005000 { + mmc@80005000 { arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <8>; @@ -180,7 +165,7 @@ }; // On-board eMMC - sdi4_per2@80114000 { + mmc@80114000 { arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <8>; diff --git a/arch/arm/boot/dts/ste-href520-tvk.dts b/arch/arm/boot/dts/ste-href520-tvk.dts index f8c0c1e6aa04..a036a03f6718 100644 --- a/arch/arm/boot/dts/ste-href520-tvk.dts +++ b/arch/arm/boot/dts/ste-href520-tvk.dts @@ -12,11 +12,43 @@ model = "ST-Ericsson HREF520 and TVK1281618 UIB"; compatible = "st-ericsson,href520", "st-ericsson,u8500"; - soc { - vmmci: regulator-gpio { - gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; - enable-gpio = <&gpio2 14 GPIO_ACTIVE_HIGH>; - enable-active-high; + + /* ST6G3244ME level translator for 1.8/2.9 V */ + vmmci: regulator-gpio { + compatible = "regulator-gpio"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-name = "mmci-reg"; + regulator-type = "voltage"; + + startup-delay-us = <100>; + + states = <1800000 0x1 + 2900000 0x0>; + + gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; + enable-gpio = <&gpio2 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&vmmci_default_mode>; + }; +}; + +&pinctrl { + vmmci { + vmmci_default_mode: vmmc_default { + /* VMMCI level-shifter enable */ + default_href520_cfg1 { + pins = "GPIO78_F4"; + ste,config = <&gpio_out_hi>; + }; + /* VMMCI level-shifter voltage select */ + default_href520_cfg2 { + pins = "GPIO5_AG6"; + ste,config = <&gpio_out_hi>; + }; }; }; }; diff --git a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts index 8ce6b723abf2..dfc933214c1a 100644 --- a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts +++ b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts @@ -12,6 +12,25 @@ model = "ST-Ericsson HREF (pre-v60) and ST UIB"; compatible = "st-ericsson,mop500", "st-ericsson,u8500"; + /* ST6G3244ME level translator for 1.8/2.9 V */ + vmmci: regulator-gpio { + compatible = "regulator-gpio"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-name = "mmci-reg"; + regulator-type = "voltage"; + + startup-delay-us = <100>; + + states = <1800000 0x1 + 2900000 0x0>; + + gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>; + enable-gpio = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + soc { /* Reset line for the BU21013 touchscreen */ i2c@80110000 { diff --git a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts index 142f5475521f..4e6e4439dcff 100644 --- a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts +++ b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts @@ -11,4 +11,23 @@ / { model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB"; compatible = "st-ericsson,mop500", "st-ericsson,u8500"; + + /* ST6G3244ME level translator for 1.8/2.9 V */ + vmmci: regulator-gpio { + compatible = "regulator-gpio"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-name = "mmci-reg"; + regulator-type = "voltage"; + + startup-delay-us = <100>; + + states = <1800000 0x1 + 2900000 0x0>; + + gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>; + enable-gpio = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; }; diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi index 115495de8612..29b67abfc461 100644 --- a/arch/arm/boot/dts/ste-hrefprev60.dtsi +++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi @@ -61,16 +61,10 @@ }; // External Micro SD slot - sdi0_per1@80126000 { + mmc@80126000 { cd-gpios = <&tc3589x_gpio 3 GPIO_ACTIVE_HIGH>; }; - vmmci: regulator-gpio { - gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>; - enable-gpio = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - pinctrl { /* Set this up using hogs */ pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts index 1316886e6bcb..52c56ed17ae6 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts +++ b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts @@ -14,6 +14,28 @@ model = "ST-Ericsson HREF (v60+) and ST UIB"; compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; + /* ST6G3244ME level translator for 1.8/2.9 V */ + vmmci: regulator-gpio { + compatible = "regulator-gpio"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-name = "mmci-reg"; + regulator-type = "voltage"; + + startup-delay-us = <100>; + + states = <1800000 0x1 + 2900000 0x0>; + + gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; + enable-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&vmmci_default_mode>; + }; + soc { /* Reset line for the BU21013 touchscreen */ i2c@80110000 { @@ -33,3 +55,20 @@ }; }; }; + +&pinctrl { + vmmci { + vmmci_default_mode: vmmc_default { + /* VMMCI level-shifter enable */ + default_hrefv60_cfg2 { + pins = "GPIO169_D22"; + ste,config = <&gpio_out_hi>; + }; + /* VMMCI level-shifter voltage select */ + default_hrefv60_cfg3 { + pins = "GPIO5_AG6"; + ste,config = <&gpio_out_hi>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts index 5d4b8245f02c..9c2d2ee6d6d8 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts +++ b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts @@ -13,4 +13,43 @@ / { model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB"; compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; + + /* ST6G3244ME level translator for 1.8/2.9 V */ + vmmci: regulator-gpio { + compatible = "regulator-gpio"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-name = "mmci-reg"; + regulator-type = "voltage"; + + startup-delay-us = <100>; + + states = <1800000 0x1 + 2900000 0x0>; + + gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; + enable-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&vmmci_default_mode>; + }; +}; + +&pinctrl { + vmmci { + vmmci_default_mode: vmmc_default { + /* VMMCI level-shifter enable */ + default_hrefv60_cfg2 { + pins = "GPIO169_D22"; + ste,config = <&gpio_out_hi>; + }; + /* VMMCI level-shifter voltage select */ + default_hrefv60_cfg3 { + pins = "GPIO5_AG6"; + ste,config = <&gpio_out_hi>; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi index 05b4fbbba57f..8f504edefd3f 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi +++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi @@ -10,6 +10,64 @@ model = "ST-Ericsson HREF (v60+) platform with Device Tree"; compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; + thermal-zones { + chassis-thermal { + /* Poll every 20 seconds */ + polling-delay = <20000>; + /* Poll every 2nd second when cooling */ + polling-delay-passive = <2000>; + + thermal-sensors = <&therm1>, <&therm2>; + + /* Tripping points made from rough guess about operating conditions */ + trips { + chassis_alert: chassis-alert { + /* At 50 degrees take down the CPU frequency */ + temperature = <50000>; + hysteresis = <3000>; + type = "active"; + }; + chassis_crit: chassis-crit { + /* Just shut down at 70 degrees */ + temperature = <70000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + /* Push down the operating frequency of the SoC when it gets hot */ + cooling-maps { + map0 { + trip = <&chassis_alert>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + contribution = <100>; + }; + }; + }; + }; + + /* + * Thermistors on the board, formally to monitor battery temperatures + * but what they measure is the board temperature. + */ + therm1: thermistor@0 { + compatible = "murata,ncp18wb473"; + io-channels = <&gpadc 0x06>; /* AUX1 */ + pullup-uv = <1800000>; + pullup-ohm = <220000>; + pulldown-ohm = <0>; + #thermal-sensor-cells = <0>; + }; + + therm2: thermistor@1 { + compatible = "murata,ncp18wb473"; + io-channels = <&gpadc 0x07>; /* AUX2 */ + pullup-uv = <1800000>; + pullup-ohm = <220000>; + pulldown-ohm = <0>; + #thermal-sensor-cells = <0>; + }; + soc { /* Name the GPIO muxed rails on the HREF boards */ gpio@8012e000 { @@ -132,16 +190,10 @@ }; // External Micro SD slot - sdi0_per1@80126000 { + mmc@80126000 { cd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95 }; - vmmci: regulator-gpio { - gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; - enable-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - pinctrl { /* * Set this up using hogs, as time goes by and as seems fit, these @@ -166,16 +218,6 @@ pins = "GPIO95_E8"; ste,config = <&gpio_in_pu>; }; - /* VMMCI level-shifter enable */ - default_hrefv60_cfg2 { - pins = "GPIO169_D22"; - ste,config = <&gpio_out_hi>; - }; - /* VMMCI level-shifter voltage select */ - default_hrefv60_cfg3 { - pins = "GPIO5_AG6"; - ste,config = <&gpio_out_hi>; - }; }; }; ipgpio { diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts index 41ed21a4fdc1..8142c017882c 100644 --- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts +++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts @@ -195,7 +195,7 @@ pinctrl-0 = <&uart0_nhk_mode>; status = "okay"; }; - mmcsd: sdi@101f6000 { + mmcsd: mmc@101f6000 { cd-gpios = <&stmpe_gpio44 7 GPIO_ACTIVE_LOW>; wp-gpios = <&stmpe_gpio44 18 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts index 4445446fa828..f16314ffbf4b 100644 --- a/arch/arm/boot/dts/ste-nomadik-s8815.dts +++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts @@ -139,7 +139,7 @@ status = "okay"; }; /* Configure card detect for the uSD slot */ - mmcsd: sdi@101f6000 { + mmc@101f6000 { cd-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index 4f38aeecadb3..c9b906432341 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -825,7 +825,7 @@ interrupts = <10>; }; - mmcsd: sdi@101f6000 { + mmcsd: mmc@101f6000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x101f6000 0x1000>; clocks = <&sdiclk>, <&pclksdi>; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index be90e73c923e..b344b3748143 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -4,7 +4,7 @@ */ /dts-v1/; -#include "ste-db8500.dtsi" +#include "ste-db9500.dtsi" #include "ste-href-ab8500.dtsi" #include "ste-href-family-pinctrl.dtsi" @@ -213,7 +213,7 @@ }; // External Micro SD slot - sdi0_per1@80126000 { + mmc@80126000 { arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <4>; @@ -241,7 +241,7 @@ }; // WLAN SDIO channel - sdi1_per2@80118000 { + mmc@80118000 { arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <4>; @@ -253,7 +253,7 @@ }; // Unused PoP eMMC - register and put it to sleep by default */ - sdi2_per3@80005000 { + mmc@80005000 { arm,primecell-periphid = <0x10480180>; pinctrl-names = "default"; pinctrl-0 = <&mc2_a_1_sleep>; @@ -262,7 +262,7 @@ }; // On-board eMMC - sdi4_per2@80114000 { + mmc@80114000 { arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <8>; diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts deleted file mode 100644 index f4e7660fead7..000000000000 --- a/arch/arm/boot/dts/ste-u300.dts +++ /dev/null @@ -1,464 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree for the ST-Ericsson U300 Machine and SoC - */ - -/dts-v1/; - -/ { - model = "ST-Ericsson U300"; - compatible = "stericsson,u300"; - #address-cells = <1>; - #size-cells = <1>; - - chosen { - bootargs = "root=/dev/ram0 console=ttyAMA0,115200n8 earlyprintk"; - }; - - aliases { - serial0 = &uart0; - serial1 = &uart1; - }; - - memory { - device_type = "memory"; - reg = <0x48000000 0x03c00000>; - }; - - s365 { - compatible = "stericsson,s365"; - vana15-supply = <&ab3100_ldo_d_reg>; - syscon = <&syscon>; - }; - - syscon: syscon@c0011000 { - compatible = "stericsson,u300-syscon", "syscon"; - reg = <0xc0011000 0x1000>; - clk32: app_32_clk@32k { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - }; - pll13: pll13@13M { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <13000000>; - }; - /* Slow bridge clocks under PLL13 */ - slow_clk: slow_clk@13M { - #clock-cells = <0>; - compatible = "stericsson,u300-syscon-clk"; - clock-type = <0>; /* Slow */ - clock-id = <0>; - clocks = <&pll13>; - }; - uart0_clk: uart0_clk@13M { - #clock-cells = <0>; - compatible = "stericsson,u300-syscon-clk"; - clock-type = <0>; /* Slow */ - clock-id = <1>; - clocks = <&slow_clk>; - }; - gpio_clk: gpio_clk@13M { - #clock-cells = <0>; - compatible = "stericsson,u300-syscon-clk"; - clock-type = <0>; /* Slow */ - clock-id = <4>; - clocks = <&slow_clk>; - }; - rtc_clk: rtc_clk@13M { - #clock-cells = <0>; - compatible = "stericsson,u300-syscon-clk"; - clock-type = <0>; /* Slow */ - clock-id = <6>; - clocks = <&slow_clk>; - }; - apptimer_clk: app_tmr_clk@13M { - #clock-cells = <0>; - compatible = "stericsson,u300-syscon-clk"; - clock-type = <0>; /* Slow */ - clock-id = <7>; - clocks = <&slow_clk>; - }; - acc_tmr_clk@13M { - #clock-cells = <0>; - compatible = "stericsson,u300-syscon-clk"; - clock-type = <0>; /* Slow */ - clock-id = <8>; - clocks = <&slow_clk>; - }; - pll208: pll208@208M { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <208000000>; - }; - app208: app_208_clk@208M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&pll208>; - }; - cpu_clk@208M { - #clock-cells = <0>; - compatible = "stericsson,u300-syscon-clk"; - clock-type = <2>; /* Rest */ - clock-id = <3>; - clocks = <&app208>; - }; - app104: app_104_clk@104M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <2>; - clock-mult = <1>; - clocks = <&pll208>; - }; - semi_clk@104M { - #clock-cells = <0>; - compatible = "stericsson,u300-syscon-clk"; - clock-type = <2>; /* Rest */ - clock-id = <9>; - clocks = <&app104>; - }; - app52: app_52_clk@52M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <4>; - clock-mult = <1>; - clocks = <&pll208>; - }; - /* AHB subsystem clocks */ - ahb_clk: ahb_subsys_clk@52M { - #clock-cells = <0>; - compatible = "stericsson,u300-syscon-clk"; - clock-type = <2>; /* Rest */ - clock-id = <10>; - clocks = <&app52>; - }; - intcon_clk@52M { - #clock-cells = <0>; - compatible = "stericsson,u300-syscon-clk"; - clock-type = <2>; /* Rest */ - clock-id = <12>; - clocks = <&ahb_clk>; - }; - emif_clk@52M { - #clock-cells = <0>; - compatible = "stericsson,u300-syscon-clk"; - clock-type = <2>; /* Rest */ - clock-id = <5>; - clocks = <&ahb_clk>; - }; - dmac_clk: dmac_clk@52M { - #clock-cells = <0>; - compatible = "stericsson,u300-syscon-clk"; - clock-type = <2>; /* Rest */ - clock-id = <4>; - clocks = <&app52>; - }; - fsmc_clk: fsmc_clk@52M { - #clock-cells = <0>; - compatible = "stericsson,u300-syscon-clk"; - clock-type = <2>; /* Rest */ - clock-id = <6>; - clocks = <&app52>; - }; - xgam_clk: xgam_clk@52M { - #clock-cells = <0>; - compatible = "stericsson,u300-syscon-clk"; - clock-type = <2>; /* Rest */ - clock-id = <8>; - clocks = <&app52>; - }; - app26: app_26_clk@26M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <2>; - clock-mult = <1>; - clocks = <&app52>; - }; - /* Fast bridge clocks */ - fast_clk: fast_clk@26M { - #clock-cells = <0>; - compatible = "stericsson,u300-syscon-clk"; - clock-type = <1>; /* Fast */ - clock-id = <0>; - clocks = <&app26>; - }; - i2c0_clk: i2c0_clk@26M { - #clock-cells = <0>; - compatible = "stericsson,u300-syscon-clk"; - clock-type = <1>; /* Fast */ - clock-id = <1>; - clocks = <&fast_clk>; - }; - i2c1_clk: i2c1_clk@26M { - #clock-cells = <0>; - compatible = "stericsson,u300-syscon-clk"; - clock-type = <1>; /* Fast */ - clock-id = <2>; - clocks = <&fast_clk>; - }; - mmc_pclk: mmc_p_clk@26M { - #clock-cells = <0>; - compatible = "stericsson,u300-syscon-clk"; - clock-type = <1>; /* Fast */ - clock-id = <5>; - clocks = <&fast_clk>; - }; - mmc_mclk: mmc_mclk { - #clock-cells = <0>; - compatible = "stericsson,u300-syscon-mclk"; - clocks = <&mmc_pclk>; - }; - spi_clk: spi_p_clk@26M { - #clock-cells = <0>; - compatible = "stericsson,u300-syscon-clk"; - clock-type = <1>; /* Fast */ - clock-id = <6>; - clocks = <&fast_clk>; - }; - }; - - timer: timer@c0014000 { - compatible = "stericsson,u300-apptimer"; - reg = <0xc0014000 0x1000>; - interrupt-parent = <&vica>; - interrupts = <24 25 26 27>; - clocks = <&apptimer_clk>; - }; - - gpio: gpio@c0016000 { - compatible = "stericsson,gpio-coh901"; - reg = <0xc0016000 0x1000>; - interrupt-parent = <&vicb>; - interrupts = <0 1 2 18 21 22 23>; - clocks = <&gpio_clk>; - interrupt-names = "gpio0", "gpio1", "gpio2", "gpio3", - "gpio4", "gpio5", "gpio6"; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - }; - - pinctrl: pinctrl@c0011000 { - compatible = "stericsson,pinctrl-u300"; - reg = <0xc0011000 0x1000>; - }; - - watchdog: watchdog@c0012000 { - compatible = "stericsson,coh901327"; - reg = <0xc0012000 0x1000>; - interrupt-parent = <&vicb>; - interrupts = <3>; - clocks = <&clk32>; - }; - - rtc: rtc@c0017000 { - compatible = "stericsson,coh901331"; - reg = <0xc0017000 0x1000>; - interrupt-parent = <&vicb>; - interrupts = <10>; - clocks = <&rtc_clk>; - }; - - dmac: dma-controller@c00020000 { - compatible = "stericsson,coh901318"; - reg = <0xc0020000 0x1000>; - interrupt-parent = <&vica>; - interrupts = <2>; - #dma-cells = <1>; - dma-channels = <40>; - clocks = <&dmac_clk>; - }; - - /* A NAND flash of 128 MiB */ - fsmc: flash@40000000 { - compatible = "stericsson,fsmc-nand"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x9f800000 0x1000>, /* FSMC Register*/ - <0x80000000 0x4000>, /* NAND Base DATA */ - <0x80020000 0x4000>, /* NAND Base ADDR */ - <0x80010000 0x4000>; /* NAND Base CMD */ - reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd"; - nand-skip-bbtscan; - clocks = <&fsmc_clk>; - - partition@0 { - label = "boot records"; - reg = <0x0 0x20000>; - }; - partition@20000 { - label = "free"; - reg = <0x20000 0x7e0000>; - }; - partition@800000 { - label = "platform"; - reg = <0x800000 0xf800000>; - }; - }; - - i2c0: i2c@c0004000 { - compatible = "st,ddci2c"; - reg = <0xc0004000 0x1000>; - interrupt-parent = <&vicb>; - interrupts = <8>; - clocks = <&i2c0_clk>; - #address-cells = <1>; - #size-cells = <0>; - ab3100: ab3100@48 { - compatible = "stericsson,ab3100"; - reg = <0x48>; - interrupt-parent = <&vica>; - interrupts = <0>; /* EXT0 IRQ */ - ab3100-regulators { - compatible = "stericsson,ab3100-regulators"; - ab3100_ldo_a_reg: ab3100_ldo_a { - startup-delay-us = <200>; - regulator-always-on; - regulator-boot-on; - }; - ab3100_ldo_c_reg: ab3100_ldo_c { - startup-delay-us = <200>; - }; - ab3100_ldo_d_reg: ab3100_ldo_d { - startup-delay-us = <200>; - }; - ab3100_ldo_e_reg: ab3100_ldo_e { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - startup-delay-us = <200>; - regulator-always-on; - regulator-boot-on; - }; - ab3100_ldo_f_reg: ab3100_ldo_f { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - startup-delay-us = <600>; - regulator-always-on; - regulator-boot-on; - }; - ab3100_ldo_g_reg: ab3100_ldo_g { - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <2850000>; - startup-delay-us = <400>; - }; - ab3100_ldo_h_reg: ab3100_ldo_h { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <2750000>; - startup-delay-us = <200>; - }; - ab3100_ldo_k_reg: ab3100_ldo_k { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2750000>; - startup-delay-us = <200>; - }; - ab3100_ext_reg: ab3100_ext { - }; - ab3100_buck_reg: ab3100_buck { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1800000>; - startup-delay-us = <1000>; - regulator-always-on; - regulator-boot-on; - }; - }; - }; - }; - - i2c1: i2c@c0005000 { - compatible = "st,ddci2c"; - reg = <0xc0005000 0x1000>; - interrupt-parent = <&vicb>; - interrupts = <9>; - clocks = <&i2c1_clk>; - #address-cells = <1>; - #size-cells = <0>; - fwcam0: fwcam@10 { - reg = <0x10>; - }; - fwcam1: fwcam@5d { - reg = <0x5d>; - }; - }; - - amba { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - vica: interrupt-controller@a0001000 { - compatible = "arm,versatile-vic"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0xa0001000 0x20>; - }; - - vicb: interrupt-controller@a0002000 { - compatible = "arm,versatile-vic"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0xa0002000 0x20>; - }; - - uart0: serial@c0013000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0xc0013000 0x1000>; - interrupt-parent = <&vica>; - interrupts = <22>; - clocks = <&uart0_clk>, <&uart0_clk>; - clock-names = "apb_pclk", "uart0_clk"; - dmas = <&dmac 17 &dmac 18>; - dma-names = "tx", "rx"; - }; - - uart1: serial@c0007000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0xc0007000 0x1000>; - interrupt-parent = <&vicb>; - interrupts = <20>; - dmas = <&dmac 38 &dmac 39>; - dma-names = "tx", "rx"; - }; - - mmcsd: mmcsd@c0001000 { - compatible = "arm,pl18x", "arm,primecell"; - reg = <0xc0001000 0x1000>; - interrupt-parent = <&vicb>; - interrupts = <6 7>; - clocks = <&mmc_pclk>, <&mmc_mclk>; - clock-names = "apb_pclk", "mclk"; - max-frequency = <24000000>; - bus-width = <4>; // SD-card slot - cap-mmc-highspeed; - cap-sd-highspeed; - cd-gpios = <&gpio 12 0x4>; - cd-inverted; - vmmc-supply = <&ab3100_ldo_g_reg>; - dmas = <&dmac 14>; - dma-names = "rx"; - }; - - spi: spi@c0006000 { - compatible = "arm,pl022", "arm,primecell"; - reg = <0xc0006000 0x1000>; - interrupt-parent = <&vica>; - interrupts = <23>; - clocks = <&spi_clk>, <&spi_clk>; - clock-names = "SSPCLK", "apb_pclk"; - dmas = <&dmac 27 &dmac 28>; - dma-names = "tx", "rx"; - num-cs = <3>; - #address-cells = <1>; - #size-cells = <0>; - spi-dummy@1 { - compatible = "arm,pl022-dummy"; - reg = <1>; - spi-max-frequency = <20000000>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts index 496f9d3ba7b7..0d43ee6583cf 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts @@ -5,6 +5,7 @@ #include "ste-ab8505.dtsi" #include "ste-dbx5x0-pinctrl.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -72,7 +73,7 @@ soc { /* External Micro SD card slot */ - sdi0_per1@80126000 { + mmc@80126000 { status = "okay"; arm,primecell-periphid = <0x10480180>; @@ -100,7 +101,7 @@ }; /* WLAN SDIO */ - sdi1_per2@80118000 { + mmc@80118000 { status = "okay"; arm,primecell-periphid = <0x10480180>; @@ -134,7 +135,7 @@ }; /* eMMC */ - sdi2_per3@80005000 { + mmc@80005000 { status = "okay"; arm,primecell-periphid = <0x10480180>; @@ -329,6 +330,7 @@ panel@0 { compatible = "samsung,s6e63m0"; reg = <0>; + max-brightness = <15>; vdd3-supply = <&panel_reg_3v0>; vci-supply = <&panel_reg_1v8>; reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; @@ -373,6 +375,32 @@ }; }; + /* Richtek RT8515GQW Flash LED Driver IC */ + flash { + compatible = "richtek,rt8515"; + /* GPIO 140 */ + enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; + /* GPIO 141 */ + ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; + /* + * RFS is 16 kOhm and RTS is 100 kOhm giving + * the flash max current 343mA and torch max + * current 55 mA. + */ + richtek,rfs-ohms = <16000>; + richtek,rts-ohms = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_flash_default_mode>; + + led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + flash-max-timeout-us = <250000>; + flash-max-microamp = <343750>; + led-max-microamp = <55000>; + }; + }; + vibrator { compatible = "gpio-vibrator"; /* GPIO195 (MOT_EN) */ @@ -498,6 +526,15 @@ }; }; + flash { + gpio_flash_default_mode: flash_default { + golden_cfg1 { + pins = "GPIO140_B11", "GPIO141_C12"; + ste,config = <&gpio_out_lo>; + }; + }; + }; + i2c-gpio-1 { i2c_gpio_1_default: i2c_gpio_1 { golden_cfg1 { diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts new file mode 100644 index 000000000000..7411bfeda285 --- /dev/null +++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts @@ -0,0 +1,930 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Devicetree for the Samsung Galaxy S Advance GT-I9070 also known as Janice. + */ + +/dts-v1/; +#include "ste-db8500.dtsi" +#include "ste-ab8500.dtsi" +#include "ste-dbx5x0-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Samsung Galaxy S Advance (GT-I9070)"; + compatible = "samsung,janice", "st-ericsson,u8500"; + + chosen { + stdout-path = &serial2; + }; + + /* External LDO for eMMC LDO VMEM_3V3 controlled by GPIO6 */ + ldo_3v3_reg: regulator-gpio-ldo-3v3 { + compatible = "regulator-fixed"; + /* Supplied in turn by VBAT */ + regulator-name = "VMEM_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>; + startup-delay-us = <5000>; // FIXME + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_ldo_en_default_mode>; + }; + + /* + * External Ricoh "TSP" regulator for the touchscreen. + * One GPIO line controls two voltages of 3.3V and 1.8V + * this line is known as "TSP_LDO_ON1" in the schematics. + */ + ldo_tsp_3v3_reg: regulator-gpio-tsp-ldo-3v3 { + compatible = "regulator-fixed"; + /* Supplied in turn by VBAT */ + regulator-name = "LDO_TSP_A3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + /* GPIO94 controls this regulator */ + gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>; + /* 70 ms power-on delay */ + startup-delay-us = <70000>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&tsp_ldo_en_default_mode>; + }; + ldo_tsp_1v8_reg: regulator-gpio-tsp-ldo-1v8 { + compatible = "regulator-fixed"; + /* Supplied in turn by VBAT */ + regulator-name = "VREG_TSP_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + /* GPIO94 controls this regulator */ + gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>; + /* 70 ms power-on delay */ + startup-delay-us = <70000>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&tsp_ldo_en_default_mode>; + }; + + /* + * External Ricoh "TSP" regulator for the touchkeys. + * Two GPIO lines controls two voltages of 3.3V and 1.8V + * TSP_LDO_ON2 controls VREG_TOUCHKEY_1V8 + * EN_LED_LDO controls VREG_KLED_3V3 (key LED) + */ + ldo_kled_3v3_reg: regulator-gpio-vreg-kled-3v3 { + compatible = "regulator-fixed"; + /* Supplied in turn by VBAT */ + regulator-name = "VREG_KLED_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + /* GPIO68 controls this regulator */ + gpio = <&gpio2 4 GPIO_ACTIVE_HIGH>; + /* 70 ms power-on delay */ + startup-delay-us = <70000>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_led_ldo_default_mode>; + }; + ldo_touchkey_1v8_reg: regulator-gpio-vreg-touchkey-1v8 { + compatible = "regulator-fixed"; + /* Supplied in turn by VBAT */ + regulator-name = "VREG_TOUCHKEY_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + /* GPIO89 controls this regulator */ + gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>; + /* 70 ms power-on delay */ + startup-delay-us = <70000>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&tsp_ldo_on2_default_mode>; + }; + + + /* + * External Ricoh RP152L010B-TR LCD LDO regulator for the display. + * LCD_PWR_EN controls a 3.0V and 1.8V output. + */ + lcd_3v0_reg: regulator-gpio-lcd-3v0 { + compatible = "regulator-fixed"; + /* Supplied in turn by VBAT */ + regulator-name = "VREG_LCD_3V0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + /* GPIO219 controls this regulator */ + gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pwr_en_default_mode>; + }; + lcd_1v8_reg: regulator-gpio-lcd-1v8 { + compatible = "regulator-fixed"; + /* Supplied in turn by VBAT */ + regulator-name = "VREG_LCD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + /* GPIO219 controls this regulator */ + gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pwr_en_default_mode>; + }; + + /* + * This regulator is a GPIO line that drives the Broadcom WLAN + * line BT_VREG_EN high and enables the internal regulators + * inside the chip. + * + * The voltage specified here is only used to determine the OCR mask, + * the for the SDIO connector, the chip is actually connected + * directly to VBAT. + */ + wl_bt_reg: regulator-gpio-wlan { + compatible = "regulator-fixed"; + regulator-name = "BT_VREG_EN"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + startup-delay-us = <100000>; + /* GPIO222 (BT_VREG_EN) */ + gpio = <&gpio6 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_ldo_en_default>; + }; + + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default_mode>; + + button-home { + linux,code = <KEY_HOME>; + label = "HOME"; + /* GPIO91 */ + gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; + }; + button-volup { + linux,code = <KEY_VOLUMEUP>; + label = "VOL+"; + /* GPIO67 */ + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + }; + button-voldown { + linux,code = <KEY_VOLUMEDOWN>; + label = "VOL-"; + /* GPIO92 */ + gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + }; + }; + + /* Richtek RT8515GQW Flash LED Driver IC */ + flash { + compatible = "richtek,rt8515"; + /* GPIO 140 */ + enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; + /* GPIO 141 */ + ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; + /* + * RFS is 16 kOhm and RTS is 100 kOhm giving + * the flash max current 343mA and torch max + * current 55 mA. + */ + richtek,rfs-ohms = <16000>; + richtek,rts-ohms = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_flash_default_mode>; + + led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + flash-max-timeout-us = <250000>; + flash-max-microamp = <343750>; + led-max-microamp = <55000>; + }; + }; + + /* Bit-banged I2C on GPIO143 and GPIO144 also called "SUBPMU I2C" */ + i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio4 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio4 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_gpio_0_default>; + #address-cells = <1>; + #size-cells = <0>; + + /* Yamaha YAS530 magnetometer */ + magnetometer@2e { + compatible = "yamaha,yas530"; + reg = <0x2e>; + /* VDD 3V */ + vdd-supply = <&ab8500_ldo_aux1_reg>; + /* IOVDD 1.8V */ + iovdd-supply = <&ab8500_ldo_aux2_reg>; + /* GPIO204 COMPASS_RST_N */ + reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&yas529_default>; + }; + /* TODO: this should also be used by the NCP6914 Camera power management unit */ + }; + + /* + * These pins do have an spi controller, however the controller on + * these pins is not the fully featured PL022 SSP/SPI block but the + * ST Micro diet "PL023" version. One of the lacking features in + * this derivative is 3wire support, so it cannot be used to drive + * this panel interface. We have to use GPIO bit-banging instead. + */ + spi-gpio-0 { + compatible = "spi-gpio"; + /* Clock on GPIO220 */ + sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>; + /* MISO/MOSI on GPIO224 (no separate MISO pin) */ + mosi-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + /* Chip select on GPIO223 */ + cs-gpios = <&gpio6 31 GPIO_ACTIVE_LOW>; + num-chipselects = <1>; + + pinctrl-names = "default"; + pinctrl-0 = <&spi_gpio_0_default>; + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "samsung,s6e63m0"; + reg = <0>; + vdd3-supply = <&lcd_3v0_reg>; + vci-supply = <&lcd_1v8_reg>; + /* Reset on GPIO139 */ + reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&panel_default_mode>; + spi-3wire; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; + }; + + /* + * Current sense amplifier on the light sensor to convert current to + * voltage. We do not know if this is the actual configuration. The + * sense resistor value was found by calibrating in a room ambient + * light with a second mobile phone light sensor as reference. If you + * pry a Janice phone apart and inspect it you may figure this out. + */ + gp2a_shunt: current-sense-shunt { + compatible = "current-sense-shunt"; + io-channels = <&gpadc 0x07>; + shunt-resistor-micro-ohms = <15000000>; /* 15 ohms c:a */ + #io-channel-cells = <0>; + io-channel-ranges; + }; + + /* Bit-banged I2C on GPIO196 and GPIO197 also called "TOUCHKEY_I2C" */ + i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio6 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio6 4 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_gpio_1_default>; + #address-cells = <1>; + #size-cells = <0>; + + touchkey@20 { + compatible = "coreriver,tc360-touchkey"; + reg = <0x20>; + vdd-supply = <&ldo_kled_3v3_reg>; + vcc-supply = <&ldo_touchkey_1v8_reg>; + vddio-supply = <&ldo_touchkey_1v8_reg>; + + /* Interrupt on GPIO 198 */ + interrupt-parent = <&gpio6>; + interrupts = <6 IRQ_TYPE_EDGE_RISING>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchkey_default_mode>; + linux,keycodes = <KEY_MENU KEY_BACK>; + }; + }; + + /* Bit-banged I2C on GPIO201 and GPIO202 also called "MOT_I2C" */ + i2c-gpio-2 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio6 10 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio6 9 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_gpio_2_default>; + #address-cells = <1>; + #size-cells = <0>; + /* TODO: add the Immersion ISA1200 I2C device here */ + }; + + /* Bit-banged I2C on GPIO151 and GPIO152 also called "NFC_I2C" */ + i2c-gpio-3 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio4 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio4 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_gpio_3_default>; + #address-cells = <1>; + #size-cells = <0>; + + nfc@30 { + compatible = "nxp,pn547", "nxp,nxp-nci-i2c"; + reg = <0x30>; + /* NFC IRQ on GPIO32 */ + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + /* GPIO 31 */ + firmware-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>; + /* GPIO88 */ + enable-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pn547_janice_default>; + }; + }; + + soc { + /* External Micro SD slot */ + mmc@80126000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + st,sig-dir-cmd; + st,sig-dir-dat0; + st,sig-dir-dat2; + st,sig-pin-fbclk; + full-pwr-cycle; + /* MMC is powered by AUX3 1.2V .. 2.91V */ + vmmc-supply = <&ab8500_ldo_aux3_reg>; + /* 2.9 V level translator is using AUX3 at 2.9 V as well */ + vqmmc-supply = <&ab8500_ldo_aux3_reg>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mc0_a_2_default>; + pinctrl-1 = <&mc0_a_2_sleep>; + cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217 + status = "okay"; + }; + + /* WLAN SDIO channel */ + mmc@80118000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <4>; + non-removable; + cap-sd-highspeed; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mc1_a_2_default>; + pinctrl-1 = <&mc1_a_2_sleep>; + /* + * GPIO-controlled voltage enablement: this drives + * the BT_VREG_EN line high when we use this device. + * Represented as regulator to fill OCR mask and to + * be usable in parallel with the Bluetooth chip. + */ + vmmc-supply = <&wl_bt_reg>; + + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wifi@1 { + /* Actually BRCM4330 */ + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + /* GPIO216 WL_HOST_WAKE */ + interrupt-parent = <&gpio6>; + interrupts = <24 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wake"; + /* GPIO215 WLAN_RST_N */ + /* FIXME: kernel does not use this assert/deassert */ + reset-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_default_mode>; + }; + }; + + /* eMMC */ + mmc@80005000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <8>; + non-removable; + cap-mmc-highspeed; + mmc-ddr-1_8v; + vmmc-supply = <&ldo_3v3_reg>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mc2_a_1_default>; + pinctrl-1 = <&mc2_a_1_sleep>; + status = "okay"; + }; + + /* GBF (Bluetooth) UART */ + uart@80120000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&u0_a_1_default>; + pinctrl-1 = <&u0_a_1_sleep>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + /* + * We actually have shutdown-gpios, BT_VREG_EN on GPIO222, + * but since this GPIO is shared with the WLAN chip, we need + * to reference the regulator instead. The regulator + * framework will reference count the GPIO usage and + * make sure we can use the same GPIO for several supplies. + */ + // shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>; + vbat-supply = <&wl_bt_reg>; + /* BT_WAKE on GPIO199 */ + device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; + /* BT_HOST_WAKE on GPIO97 */ + /* FIXME: convert to interrupt */ + host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; + /* BT_RST_N on GPIO209 */ + reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&bluetooth_default_mode>; + }; + }; + + /* GPS UART */ + uart@80121000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + /* CTS/RTS is not used, CTS is repurposed as GPIO */ + pinctrl-0 = <&u1rxtx_a_1_default>; + pinctrl-1 = <&u1rxtx_a_1_sleep>; + /* FIXME: add a device for the GPS here */ + }; + + /* Debugging console UART connected to TSU6111RSVR (FSA880) */ + uart@80007000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&u2rxtx_c_1_default>; + pinctrl-1 = <&u2rxtx_c_1_sleep>; + }; + + prcmu@80157000 { + ab8500 { + ab8500_usb { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&usb_a_1_default>; + pinctrl-1 = <&usb_a_1_sleep>; + }; + + ab8500-regulators { + ab8500_ldo_aux1 { + /* Used for VDD for sensors */ + regulator-name = "V-SENSORS-VDD"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ab8500_ldo_aux2 { + /* Used for VIO for sensors */ + regulator-name = "V-SENSORS-VIO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ab8500_ldo_aux3 { + /* Used for voltage for external MMC/SD card */ + regulator-name = "V-MMC-SD"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2910000>; + }; + }; + }; + }; + + /* I2C0 */ + i2c@80004000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c0_a_1_default>; + pinctrl-1 = <&i2c0_a_1_sleep>; + + proximity@44 { + /* Janice has the GP2AP002A00F with light sensor */ + compatible = "sharp,gp2ap002a00f"; + clock-frequency = <400000>; + reg = <0x44>; + + interrupt-parent = <&gpio4>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vio-supply = <&ab8500_ldo_aux2_reg>; + /* ADC channel AUX2 to read ALSOUT ambient light sensor out */ + io-channels = <&gp2a_shunt>; + io-channel-names = "alsout"; + pinctrl-names = "default"; + pinctrl-0 = <&gp2ap002_janice_default>; + /* B1 mode (arch/arm/mach-ux500/include/mach/gp2a.h) */ + sharp,proximity-far-hysteresis = /bits/ 8 <0x40>; + sharp,proximity-close-hysteresis = /bits/ 8 <0x0f>; + }; + }; + + /* I2C1 on GPIO16 and GPIO17 also called "MUS I2C" */ + i2c@80122000 { + status = "okay"; + pinctrl-names = "default","sleep"; + pinctrl-0 = <&i2c1_b_2_default>; + pinctrl-1 = <&i2c1_b_2_sleep>; + + /* Texas Instruments TSU6111 micro USB switch */ + usb-switch@25 { + compatible = "ti,tsu6111"; + reg = <0x25>; + /* Interrupt JACK_INT_N on GPIO95 */ + interrupt-parent = <&gpio2>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&tsu6111_janice_default>; + }; + }; + + /* I2C2 on GPIO10 and GPIO11 also called "SENSORS I2C" */ + i2c@80128000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_b_2_default>; + pinctrl-1 = <&i2c2_b_2_sleep>; + + gyroscope@68 { + compatible = "invensense,mpu3050"; + reg = <0x68>; + /* GPIO226 interrupt */ + interrupt-parent = <&gpio7>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + /* FIXME: no idea about this */ + mount-matrix = "1", "0", "0", + "0", "1", "0", + "0", "0", "1"; + vlogic-supply = <&ab8500_ldo_aux2_reg>; // 1.8V + vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V + pinctrl-names = "default"; + pinctrl-0 = <&mpu3050_janice_default>; + + /* + * The MPU-3050 acts as a hub for the + * accelerometer. + */ + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + + /* Bosch BMA222 accelerometer */ + accelerometer@08 { + compatible = "bosch,bma222"; + reg = <0x08>; + /* FIXME: no idea about this */ + mount-matrix = "1", "0", "0", + "0", "1", "0", + "0", "0", "1"; + vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V + vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V + }; + }; + }; + }; + + /* I2C3 */ + i2c@80110000 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c3_c_2_default>; + pinctrl-1 = <&i2c3_c_2_sleep>; + + /* Atmel mXT224E touchscreen */ + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + /* GPIO218 (TSP_INT_1V8) */ + interrupt-parent = <&gpio6>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + /* VDDA is "analog supply", 2.57-3.47 V */ + vdda-supply = <&ldo_tsp_3v3_reg>; + /* VDD is "digital supply" 1.71-3.47V */ + vdd-supply = <&ldo_tsp_1v8_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&tsp_default>; + }; + }; + + mcde@a0350000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dpi_default_mode>; + + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + }; +}; + +&pinctrl { + /* + * This extends the MC0_A_2 default config to include + * the card detect GPIO217 line. + */ + sdi0 { + mc0_a_2_default { + default_cfg4 { + pins = "GPIO217_AH12"; /* card detect */ + ste,config = <&gpio_in_pd>; + }; + }; + }; + mcde { + dpi_default_mode: dpi_default { + default_mux1 { + /* Mux in all the data lines */ + function = "lcd"; + groups = + /* Data lines D0-D7 GPIO70..GPIO77 */ + "lcd_d0_d7_a_1", + /* Data lines D8-D11 GPIO78..GPIO81 */ + "lcd_d8_d11_a_1", + /* Data lines D12-D15 GPIO82..GPIO85 */ + "lcd_d12_d15_a_1", + /* Data lines D16-D23 GPIO161..GPIO168 */ + "lcd_d16_d23_b_1"; + }; + default_mux2 { + function = "lcda"; + /* Clock line on GPIO150, DE, VSO, HSO on GPIO169..GPIO171 */ + groups = "lcdaclk_b_1", "lcda_b_1"; + }; + /* Input, no pull-up is the default state for pins used for an alt function */ + default_cfg1 { + pins = "GPIO150_C14", "GPIO169_D22", "GPIO170_C23", "GPIO171_D23"; + ste,config = <&in_nopull>; + }; + }; + }; + /* GPIO for panel reset control */ + panel { + panel_default_mode: panel_default { + janice_cfg1 { + /* Reset line */ + pins = "GPIO139_C9"; + ste,config = <&gpio_out_lo>; + }; + }; + }; + /* GPIO that enables the LDO regulator for the eMMC */ + emmc-ldo { + emmc_ldo_en_default_mode: emmc_ldo_default { + /* LDO enable on GPIO6 */ + janice_cfg1 { + pins = "GPIO6_AF6"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + /* GPIO that enables the LDO regulator for the touchscreen */ + tsp-ldo { + tsp_ldo_en_default_mode: tsp_ldo_default { + /* LDO enable on GPIO94 */ + janice_cfg1 { + pins = "GPIO94_D7"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + /* GPIO that enables the LDO regulator for the key LED */ + key-led { + en_led_ldo_default_mode: en_led_ldo_default { + /* EN_LED_LDO on GPIO68 */ + janice_cfg1 { + pins = "GPIO68_E1"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + /* GPIO that enables the LDO regulator for the touchkeys */ + touchkey-ldo { + tsp_ldo_on2_default_mode: tsp_ldo_on2_default { + /* TSP_LDO_ON2 on GPIO89 */ + janice_cfg1 { + pins = "GPIO89_E6"; + ste,config = <&gpio_out_lo>; + }; + }; + }; + touchkey { + touchkey_default_mode: touchkey_default { + janice_cfg1 { + /* Interrupt */ + pins = "GPIO198_AG25"; + ste,config = <&gpio_in_nopull>; + }; + janice_cfg2 { + /* Reset, actually completely unused (not routed) */ + pins = "GPIO205_AG23"; + ste,config = <&gpio_in_pd>; + }; + }; + }; + /* GPIO that enabled the LDO regulator for the LCD display */ + lcd-ldo { + lcd_pwr_en_default_mode: lcd_pwr_en_default { + /* LCD_PWR_EN on GPIO219 */ + janice_cfg1 { + pins = "GPIO219_AG10"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + /* GPIO that enables the WLAN internal LDO regulators */ + wlan-ldo { + wlan_ldo_en_default: wlan_ldo_default { + /* GPIO222 BT_VREG_ON */ + janice_cfg1 { + pins = "GPIO222_AJ9"; + ste,config = <&gpio_out_lo>; + }; + }; + }; + /* Flash and torch */ + flash { + gpio_flash_default_mode: flash_default { + janice_cfg1 { + pins = "GPIO140_B11", "GPIO141_C12"; + ste,config = <&gpio_out_lo>; + }; + }; + }; + /* GPIO keys */ + gpio-keys { + gpio_keys_default_mode: gpio_keys_default { + skomer_cfg1 { + pins = "GPIO67_G2", /* VOL UP */ + "GPIO91_B6", /* HOME */ + "GPIO92_D6"; /* VOL DOWN */ + ste,config = <&gpio_in_pu>; + }; + }; + }; + /* Interrupt line for the Atmel MXT228 touchscreen */ + tsp { + tsp_default: tsp_default { + janice_cfg1 { + pins = "GPIO218_AH11"; /* TSP_INT_1V8 */ + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* Reset line for the Yamaha YAS529 magnetometer */ + yas529 { + yas529_default: yas529_janice { + janice_cfg1 { + pins = "GPIO204_AF23"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + /* Interrupt line for light/proximity sensor GP2AP002 */ + gp2ap002 { + gp2ap002_janice_default: gp2ap002_janice { + janice_cfg1 { + pins = "GPIO146_D13"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* Interrupt line for Invensense MPU3050 gyroscope */ + mpu3050 { + mpu3050_janice_default: mpu3050_janice { + janice_cfg1 { + /* GPIO226 used for IRQ */ + pins = "GPIO226_AF8"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* GPIO-based I2C bus for magnetometer and NCP6914 */ + i2c-gpio-0 { + i2c_gpio_0_default: i2c_gpio_0 { + janice_cfg1 { + pins = "GPIO143_D12", "GPIO144_B13"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* GPIO-based I2C bus for the Cypress touchkeys */ + i2c-gpio-1 { + i2c_gpio_1_default: i2c_gpio_1 { + janice_cfg1 { + pins = "GPIO196_AG26", "GPIO197_AH24"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* GPIO-based I2C bus for the Immersion ISA1200 */ + i2c-gpio-2 { + i2c_gpio_2_default: i2c_gpio_2 { + janice_cfg1 { + pins = "GPIO201_AF24", "GPIO202_AF25"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* GPIO-based I2C bus for the NFC */ + i2c-gpio-3 { + i2c_gpio_3_default: i2c_gpio_3 { + janice_cfg1 { + pins = "GPIO151_D17", "GPIO152_D16"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* GPIO-based SPI bus for the display */ + spi-gpio-0 { + spi_gpio_0_default: spi_gpio_0 { + janice_cfg1 { + pins = "GPIO220_AH10", "GPIO223_AH9", "GPIO224_AG9"; + ste,config = <&gpio_out_hi>; + }; + /* This pin is unused but belongs with this SPI block */ + janice_cfg2 { + pins = "GPIO225_AG8"; + ste,config = <&in_pd>; + }; + }; + }; + wlan { + wlan_default_mode: wlan_default { + /* GPIO215 used for RESET_N */ + janice_cfg1 { + pins = "GPIO215_AH13"; + ste,config = <&gpio_out_lo>; + }; + /* GPIO216 for WL_HOST_WAKE */ + janice_cfg2 { + pins = "GPIO216_AG12"; + ste,config = <&gpio_in_pd>; + }; + }; + }; + bluetooth { + bluetooth_default_mode: bluetooth_default { + janice_cfg1 { + pins = "GPIO199_AH23"; + ste,config = <&gpio_out_lo>; + }; + janice_cfg2 { + pins = "GPIO97_D9"; + ste,config = <&gpio_in_nopull>; + }; + janice_cfg3 { + pins = "GPIO209_AG15"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + /* Interrupt line for TI TSU6111 Micro USB switch */ + tsu6111 { + tsu6111_janice_default: tsu6111_janice { + janice_cfg1 { + /* GPIO95 used for IRQ */ + pins = "GPIO95_E8"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + nfc { + pn547_janice_default: pn547_janice { + /* Interrupt line */ + janice_cfg1 { + pins = "GPIO32_V2"; + ste,config = <&gpio_in_nopull>; + }; + /* Enable and firmware GPIOs */ + janice_cfg2 { + pins = "GPIO31_V3", "GPIO88_C4"; + ste,config = <&gpio_out_lo>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts index b50634c81b44..d28a00757d0b 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts @@ -8,6 +8,7 @@ #include "ste-ab8505.dtsi" #include "ste-dbx5x0-pinctrl.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -118,6 +119,32 @@ pinctrl-0 = <&gpio_backlight_default_mode>; }; + /* Richtek RT8515GQW Flash LED Driver IC */ + flash { + compatible = "richtek,rt8515"; + /* GPIO 140 */ + enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; + /* GPIO 141 */ + ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; + /* + * RFS is 16 kOhm and RTS is 100 kOhm giving + * the flash max current 343mA and torch max + * current 55 mA. + */ + richtek,rfs-ohms = <16000>; + richtek,rts-ohms = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_flash_default_mode>; + + led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + flash-max-timeout-us = <250000>; + flash-max-microamp = <343750>; + led-max-microamp = <55000>; + }; + }; + i2c-gpio-0 { compatible = "i2c-gpio"; sda-gpios = <&gpio4 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; @@ -147,7 +174,7 @@ soc { // External Micro SD slot - sdi0_per1@80126000 { + mmc@80126000 { arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <4>; @@ -169,7 +196,7 @@ }; // WLAN SDIO channel - sdi1_per2@80118000 { + mmc@80118000 { arm,primecell-periphid = <0x10480180>; max-frequency = <50000000>; bus-width = <4>; @@ -196,7 +223,7 @@ }; // eMMC - sdi2_per3@80005000 { + mmc@80005000 { arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <8>; @@ -487,6 +514,14 @@ }; }; }; + flash { + gpio_flash_default_mode: flash_default { + skomer_cfg1 { + pins = "GPIO140_B11", "GPIO141_C12"; + ste,config = <&gpio_out_lo>; + }; + }; + }; /* GPIO that enables the 2.9V SD card level translator */ sd-level-translator { sd_level_translator_default: sd_level_translator_default { diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index ad715a0e1c9a..f6530d724d00 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -566,7 +566,7 @@ }; }; - sdio: sdio@40012c00 { + sdio: mmc@40012c00 { compatible = "arm,pl180", "arm,primecell"; arm,primecell-periphid = <0x00880180>; reg = <0x40012c00 0x400>; diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi index 640ff54ed00c..e1df603fc981 100644 --- a/arch/arm/boot/dts/stm32f746.dtsi +++ b/arch/arm/boot/dts/stm32f746.dtsi @@ -473,7 +473,7 @@ status = "disabled"; }; - sdio2: sdio2@40011c00 { + sdio2: mmc@40011c00 { compatible = "arm,pl180", "arm,primecell"; arm,primecell-periphid = <0x00880180>; reg = <0x40011c00 0x400>; @@ -484,7 +484,7 @@ status = "disabled"; }; - sdio1: sdio1@40012c00 { + sdio1: mmc@40012c00 { compatible = "arm,pl180", "arm,primecell"; arm,primecell-periphid = <0x00880180>; reg = <0x40012c00 0x400>; diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi index b083afd0ebd6..4ebffb0a45a3 100644 --- a/arch/arm/boot/dts/stm32h743.dtsi +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -354,7 +354,7 @@ dma-requests = <32>; }; - sdmmc1: sdmmc@52007000 { + sdmmc1: mmc@52007000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x10153180>; reg = <0x52007000 0x1000>; diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index 20a59e8f7a33..7b4249ed1983 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -1273,6 +1273,18 @@ }; }; + sdmmc1_b4_init_pins_a: sdmmc1-b4-init-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + }; + sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 { pins { pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */ @@ -1299,6 +1311,17 @@ }; }; + sdmmc1_dir_init_pins_a: sdmmc1-dir-init-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */ + <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + }; + sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 { pins { pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */ @@ -2018,6 +2041,23 @@ }; }; + i2c6_pins_a: i2c6-0 { + pins { + pinmux = <STM32_PINMUX('Z', 6, AF2)>, /* I2C6_SCL */ + <STM32_PINMUX('Z', 7, AF2)>; /* I2C6_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c6_sleep_pins_a: i2c6-sleep-0 { + pins { + pinmux = <STM32_PINMUX('Z', 6, ANALOG)>, /* I2C6_SCL */ + <STM32_PINMUX('Z', 7, ANALOG)>; /* I2C6_SDA */ + }; + }; + spi1_pins_a: spi1-0 { pins1 { pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */ diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index 3c75abacb374..4b8031782555 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -1047,7 +1047,7 @@ }; }; - sdmmc3: sdmmc@48004000 { + sdmmc3: mmc@48004000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00253180>; reg = <0x48004000 0x400>; @@ -1368,7 +1368,7 @@ status = "disabled"; }; - sdmmc1: sdmmc@58005000 { + sdmmc1: mmc@58005000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00253180>; reg = <0x58005000 0x1000>; @@ -1383,7 +1383,7 @@ status = "disabled"; }; - sdmmc2: sdmmc@58007000 { + sdmmc2: mmc@58007000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00253180>; reg = <0x58007000 0x1000>; @@ -1482,10 +1482,13 @@ usbphyc: usbphyc@5a006000 { #address-cells = <1>; #size-cells = <0>; + #clock-cells = <0>; compatible = "st,stm32mp1-usbphyc"; reg = <0x5a006000 0x1000>; clocks = <&rcc USBPHY_K>; resets = <&rcc USBPHY_R>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; status = "disabled"; usbphyc_port0: usb-phy@0 { diff --git a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi index 58275bcf9e26..113c48b2ef93 100644 --- a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi +++ b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi @@ -331,12 +331,8 @@ &usbphyc_port0 { phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; }; &usbphyc_port1 { phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; }; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index 81a7d5849db4..95b08876b2b3 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -393,12 +393,8 @@ &usbphyc_port0 { phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; }; &usbphyc_port1 { phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; }; diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts index cda8e871f999..1e9bf7eea0f1 100644 --- a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts +++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts @@ -36,34 +36,35 @@ stdout-path = &uart4; }; - led-act { + led-controller-0 { compatible = "gpio-leds"; - led-green { + led-0 { label = "mc1:green:act"; gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; }; - led-rgb { + led-controller-1 { compatible = "pwm-leds"; - led-red { + /* led-1 to led-3 are part of a single RGB led */ + led-1 { label = "mc1:red:rgb"; pwms = <&leds_pwm 1 1000000 0>; max-brightness = <255>; active-low; }; - led-green { + led-2 { label = "mc1:green:rgb"; pwms = <&leds_pwm 2 1000000 0>; max-brightness = <255>; active-low; }; - led-blue { + led-3 { label = "mc1:blue:rgb"; pwms = <&leds_pwm 3 1000000 0>; max-brightness = <255>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi index 62ab23824a3e..fad23d6f69b8 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi @@ -33,9 +33,9 @@ * during TX anyway and that it only controls drive enable DE * line. Hence, the RX is always enabled here. */ - rs485-rx-en { + rs485-rx-en-hog { gpio-hog; - gpios = <8 GPIO_ACTIVE_HIGH>; + gpios = <8 0>; output-low; line-name = "rs485-rx-en"; }; @@ -61,9 +61,9 @@ * order to reset the Hub when USB bus is powered down, but * so far there is no such functionality. */ - usb-hub { + usb-hub-hog { gpio-hog; - gpios = <2 GPIO_ACTIVE_HIGH>; + gpios = <2 0>; output-high; line-name = "usb-hub-reset"; }; @@ -87,6 +87,12 @@ }; }; +&i2c4 { + touchscreen@49 { + status = "disabled"; + }; +}; + &i2c5 { /* TP7/TP8 */ pinctrl-names = "default"; pinctrl-0 = <&i2c5_pins_a>; @@ -104,7 +110,7 @@ * are used for on-board microSD slot instead. */ /delete-property/broken-cd; - cd-gpios = <&gpioi 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + cd-gpios = <&gpioi 10 GPIO_ACTIVE_HIGH>; disable-wp; }; @@ -152,6 +158,4 @@ &usbphyc_port0 { phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; }; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi index 8456f172d4b1..5523f4138fd6 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi @@ -300,12 +300,8 @@ &usbphyc_port0 { phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; }; &usbphyc_port1 { phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; }; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi index 356150d28c42..cd3a1798ca68 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi @@ -36,6 +36,10 @@ status = "disabled"; }; +&fmc { + status = "disabled"; +}; + &gpioa { /* * NOTE: The USB Port on the PicoITX needs a PWR_EN signal to enable @@ -43,9 +47,9 @@ * in order to turn on port power when USB bus is powered up, but so * far there is no such functionality. */ - usb-port-power { + usb-port-power-hog { gpio-hog; - gpios = <13 GPIO_ACTIVE_LOW>; + gpios = <13 0>; output-low; line-name = "usb-port-power"; }; @@ -94,6 +98,10 @@ /delete-property/dma-names; }; +&ksz8851 { + status = "disabled"; +}; + &usart3 { pinctrl-names = "default"; pinctrl-0 = <&usart3_pins_a>; @@ -132,12 +140,8 @@ &usbphyc_port0 { phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; }; &usbphyc_port1 { phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; }; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi index ac46ab363e1b..2617815e42a6 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi @@ -386,19 +386,38 @@ }; &sdmmc1 { - pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-names = "default", "opendrain", "sleep", "init"; pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>; pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>; - broken-cd; + pinctrl-3 = <&sdmmc1_b4_init_pins_a &sdmmc1_dir_init_pins_a>; + cd-gpios = <&gpiog 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; st,sig-dir; st,neg-edge; st,use-ckin; + st,cmd-gpios = <&gpiod 2 0>; + st,ck-gpios = <&gpioc 12 0>; + st,ckin-gpios = <&gpioe 4 0>; bus-width = <4>; vmmc-supply = <&vdd_sd>; status = "okay"; }; +&sdmmc1_b4_pins_a { + /* + * SD bus pull-up resistors: + * - optional on SoMs with SD voltage translator + * - mandatory on SoMs without SD voltage translator + */ + pins1 { + bias-pull-up; + }; + pins2 { + bias-pull-up; + }; +}; + &sdmmc2 { pinctrl-names = "default", "opendrain", "sleep"; pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi index ec02cee1dd9b..b09e87fe901a 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi @@ -391,12 +391,8 @@ &usbphyc_port0 { phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; }; &usbphyc_port1 { phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; }; diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index 89c0e1ddc387..59f18846cf5d 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -694,14 +694,10 @@ &usbphyc_port0 { phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; }; &usbphyc_port1 { phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; }; &vrefbuf { diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index af8ab736fd3c..20f9ed244851 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -74,12 +74,12 @@ leds { compatible = "gpio-leds"; - red { + led-0 { label = "a1000:red:usr"; gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; }; - blue { + led-1 { label = "a1000:blue:pwr"; gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 6ca02e824acc..0645d6064235 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -75,12 +75,12 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_cubieboard>; - blue { + led-0 { label = "cubieboard:blue:usr"; gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* LED1 */ }; - green { + led-1 { label = "cubieboard:green:usr"; gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* LED2 */ linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts index 8ee3ff42bd55..63e77c05bfda 100644 --- a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts +++ b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts @@ -62,6 +62,7 @@ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ + power-supply = <®_vcc3v3>; }; chosen { diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/sun4i-a10-inet1.dts index ca878384e902..60e432a0ef1c 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet1.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet1.dts @@ -62,6 +62,7 @@ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ + power-supply = <®_vcc3v3>; }; chosen { diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts index 8a7b4c53d278..1aeb0bd5519e 100644 --- a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts +++ b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts @@ -63,7 +63,7 @@ leds { compatible = "gpio-leds"; - green { + led { label = "q5:green:usr"; gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */ }; diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts index a843e57530ed..81fdb217d339 100644 --- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts @@ -62,22 +62,22 @@ leds { compatible = "gpio-leds"; - red1 { + led-0 { label = "marsboard:red1:usr"; gpios = <&pio 1 5 GPIO_ACTIVE_HIGH>; }; - red2 { + led-1 { label = "marsboard:red2:usr"; gpios = <&pio 1 6 GPIO_ACTIVE_HIGH>; }; - red3 { + led-2 { label = "marsboard:red3:usr"; gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>; }; - red4 { + led-3 { label = "marsboard:red4:usr"; gpios = <&pio 1 8 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index 845f76824d57..ad0e25af45be 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -74,7 +74,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_olinuxinolime>; - green { + led { label = "a10-olinuxino-lime:green:usr"; gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index 83287b6c975e..1ac82376baef 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -63,12 +63,12 @@ leds { compatible = "gpio-leds"; - tx { + led-0 { label = "pcduino:green:tx"; gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; }; - rx { + led-1 { label = "pcduino:green:rx"; gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts index 24a3d23e1952..c32596947647 100644 --- a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts +++ b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts @@ -62,6 +62,7 @@ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ + power-supply = <®_vcc3v3>; }; chosen { diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts index 64d50fcfcd3a..04b0e6d28769 100644 --- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts @@ -62,7 +62,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_t003>; - red { + led { label = "t003-tv-dongle:red:usr"; gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */ default-state = "on"; diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts index 8af0eae2ddc1..667bc2dc1ea9 100644 --- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts @@ -62,7 +62,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_t004>; - red { + led { label = "t004-tv-dongle:red:usr"; gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */ default-state = "on"; diff --git a/arch/arm/boot/dts/sun5i-a10s-mk802.dts b/arch/arm/boot/dts/sun5i-a10s-mk802.dts index 6e90ccb267aa..d0219404c231 100644 --- a/arch/arm/boot/dts/sun5i-a10s-mk802.dts +++ b/arch/arm/boot/dts/sun5i-a10s-mk802.dts @@ -60,7 +60,7 @@ leds { compatible = "gpio-leds"; - red { + led { label = "mk802:red:usr"; gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */ }; diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index d6bb82c295f0..5832bb31fc51 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -79,7 +79,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_olinuxino>; - green { + led { label = "a10s-olinuxino-micro:green:usr"; gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts index b2a49a216ebf..964360f0610a 100644 --- a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts +++ b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts @@ -63,7 +63,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_r7>; - green { + led { label = "r7-tv-dongle:green:usr"; gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts index 1f74ba1634cc..ef8baa992687 100644 --- a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts +++ b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts @@ -62,7 +62,7 @@ leds { compatible = "gpio-leds"; - blue { + led { label = "a10s-wobo-i5:blue:usr"; gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts index a23bf24792ec..d059388d7252 100644 --- a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts +++ b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts @@ -61,6 +61,7 @@ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; + power-supply = <®_vcc3v3>; /* TODO: backlight uses axp gpio1 as enable pin */ }; diff --git a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts index ba8d75b3c716..2ce361f8fede 100644 --- a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts +++ b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts @@ -66,18 +66,18 @@ leds { compatible = "gpio-leds"; - red { + led-0 { label ="licheepi:red:usr"; gpios = <&pio 2 5 GPIO_ACTIVE_LOW>; }; - green { + led-1 { label ="licheepi:green:usr"; gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; default-state = "on"; }; - blue { + led-2 { label ="licheepi:blue:usr"; gpios = <&pio 2 4 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts index 5df398d77238..bfe1075e62cc 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts @@ -64,7 +64,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_olinuxinom>; - power { + led { label = "a13-olinuxino-micro:green:power"; gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 39101228a755..fadeae3cd8bb 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -66,7 +66,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_olinuxino>; - power { + led { gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>; default-state = "on"; }; diff --git a/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts b/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts index e9ef97c9c893..d60407772e5d 100644 --- a/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts +++ b/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts @@ -28,6 +28,7 @@ enable-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; + power-supply = <®_vcc3v3>; }; chosen { @@ -37,7 +38,7 @@ leds { compatible = "gpio-leds"; - power { + led { gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */ default-state = "on"; }; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index ae04955fd9a3..7075e10911d5 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -48,7 +48,7 @@ / { thermal-zones { - cpu_thermal { + cpu-thermal { /* milliseconds */ polling-delay-passive = <250>; polling-delay = <1000>; diff --git a/arch/arm/boot/dts/sun5i-gr8-evb.dts b/arch/arm/boot/dts/sun5i-gr8-evb.dts index 4c20d731a9c6..f4fe258ef06d 100644 --- a/arch/arm/boot/dts/sun5i-gr8-evb.dts +++ b/arch/arm/boot/dts/sun5i-gr8-evb.dts @@ -71,7 +71,7 @@ compatible = "pwm-backlight"; pwms = <&pwm 0 10000 0>; enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>; - + power-supply = <®_vcc3v3>; brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; }; diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi index 1a9926d71410..6847f66699ac 100644 --- a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi @@ -55,6 +55,7 @@ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>; /* AXP GPIO1 */ + power-supply = <®_vcc3v0>; }; chosen { diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index c2b4fbf552a3..250d6b87ab4d 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -726,6 +726,18 @@ #size-cells = <0>; }; + mali: gpu@1c40000 { + compatible = "allwinner,sun4i-a10-mali", "arm,mali-400"; + reg = <0x01c40000 0x10000>; + interrupts = <69>, <70>, <71>, <72>, <73>; + interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pmu"; + clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>; + clock-names = "bus", "core"; + resets = <&ccu RST_GPU>; + assigned-clocks = <&ccu CLK_GPU>; + assigned-clock-rates = <320000000>; + }; + timer@1c60000 { compatible = "allwinner,sun5i-a13-hstimer"; reg = <0x01c60000 0x1000>; diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index 73de34ae37fd..486cec6f71e0 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -226,7 +226,7 @@ axp22x: pmic@68 { compatible = "x-powers,axp221"; reg = <0x68>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; x-powers,drive-vbus-en; }; diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/sun6i-a31-i7.dts index 6cc8ccf53d88..744723d956f0 100644 --- a/arch/arm/boot/dts/sun6i-a31-i7.dts +++ b/arch/arm/boot/dts/sun6i-a31-i7.dts @@ -72,7 +72,7 @@ leds { compatible = "gpio-leds"; - blue { + led { label = "i7:blue:usr"; gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts index a645c8f4257c..e4f3415e6108 100644 --- a/arch/arm/boot/dts/sun6i-a31-m9.dts +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -61,7 +61,7 @@ leds { compatible = "gpio-leds"; - blue { + led { label = "m9:blue:pwr"; gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; default-state = "on"; @@ -115,7 +115,7 @@ axp22x: pmic@68 { compatible = "x-powers,axp221"; reg = <0x68>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts index 648f24746234..7bd4bdd66a76 100644 --- a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts +++ b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts @@ -61,7 +61,7 @@ leds { compatible = "gpio-leds"; - blue { + led { label = "a1000g:blue:pwr"; gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; default-state = "on"; @@ -115,7 +115,7 @@ axp22x: pmic@68 { compatible = "x-powers,axp221"; reg = <0x68>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index f3425a66fc0a..a75033e85fcb 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -165,7 +165,7 @@ }; thermal-zones { - cpu_thermal { + cpu-thermal { /* milliseconds */ polling-delay-passive = <250>; polling-delay = <1000>; @@ -1305,7 +1305,7 @@ clock-output-names = "osc32k"; }; - nmi_intc: interrupt-controller@1f00c00 { + r_intc: interrupt-controller@1f00c00 { compatible = "allwinner,sun6i-a31-r-intc"; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts index bc3170a0b8b5..66bc6ca77afb 100644 --- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts +++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts @@ -115,7 +115,6 @@ reg = <0x1c>; interrupt-parent = <&pio>; interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; /* PA9 */ - #io-channel-cells = <1>; }; }; @@ -159,7 +158,7 @@ axp22x: pmic@68 { compatible = "x-powers,axp221"; reg = <0x68>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; x-powers,drive-vbus-en; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi index 3099491de8c4..7455c0db4a8a 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi +++ b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi @@ -78,7 +78,7 @@ axp22x: pmic@68 { compatible = "x-powers,axp221"; reg = <0x68>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts index 708caee52425..efb25b949f30 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -59,17 +59,17 @@ leds { compatible = "gpio-leds"; - blue { + led-0 { label = "bpi-m2:blue:usr"; gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ }; - green { + led-1 { label = "bpi-m2:green:usr"; gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */ }; - red { + led-2 { label = "bpi-m2:red:usr"; gpios = <&pio 6 5 GPIO_ACTIVE_HIGH>; /* PG5 */ }; @@ -148,7 +148,7 @@ axp22x: pmic@68 { compatible = "x-powers,axp221"; reg = <0x68>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; eldoin-supply = <®_dcdc1>; x-powers,drive-vbus-en; @@ -261,3 +261,74 @@ &usbphy { status = "okay"; }; + +&pio { + gpio-line-names = + /* PA */ + "ETXD0", "ETXD1", "ETXD2", "ETXD3", "SDC0-DET", "", "", + "", "ETXCLK", "ETXEN", "EGTXCLK", "ERXD0", "ERXD1", + "ERXD2", "ERXD3", "", "", "", "", "ERXDV", "ERXCK", + "ETXERR", "ERXERR", "ECOL", "ECRS", "ECLKIN", "EMDC", + "EMDIO", "", "", "", "", + + /* PB */ + "CN7-P29", "CN7-P31", "CN7-P33", "CN7-P35", "CN7-P37", + "CN7-P28", "CN7-P27", "CN7-P32", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", "", "", "", "", + "", "", "", "", + + /* PC */ + "", "", "", "", "", "", "WL-SDIO-CMD", "WL-SDIO-CLK", + "WL-SDIO-D0", "WL-SDIO-D2", "WL-SDIO-D2", "WL-SDIO-D3", + "", "", "", "", "", "", "", "", "", "", "", "", "", "", + "", "USB-DRV", "", "", "", "", + + /* PD */ + "CN9-P09", "CN9-P11", "CN9-P13", "CN9-P15", "CN9-P17", + "CN9-P19", "CN9-P21", "CN9-P23", "CN9-P25", "CN9-P27", + "CN9-P29", "CN9-P31", "CN9-P33", "CN9-P35", "CN9-P37", + "CN9-P39", "CN9-P40", "CN9-P38", "CN9-P36", "CN9-P34", + "CN9-P32", "CN9-P30", "CN9-P28", "CN9-P26", "CN9-P22", + "CN9-P14", "CN9-P18", "CN9-P16", "", "", "", "", + + /* PE */ + "CN6-P20", "CN6-P24", "CN6-P30", "CN6-P28", "CN7-P08", + "CN7-P10", "CN7-P36", "CN7-P38", "CN6-P17", "CN6-P19", + "CN6-P21", "CN6-P23", "CN6-P25", "CN6-P27", "CN6-P29", + "CN6-P31", "", "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", + + /* PF */ + "SDC0-D1", "SDC0-D0", "SDC0-CLK", "SDC0-CMD", "SDC0-D3", + "SDC0-D2", "", "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", "", "", "", "", + "", + + /* PG */ + "CN9-P06", "CN9-P08", "CN9-P20", "CN9-P12", "CN9-P07", + "LED-PWR", "CN7-P13", "CN7-P11", "CN7-P22", "CN7-P15", + "LED-G", "LED-B", "CN7-P26", "CN7-P24", "CN7-P23", + "CN7-P19", "CN7-P21", "HCEC", "CN6-P22", "", "", "", "", + "", "", "", "", "", "", "", "", "", + + /* PH */ + "", "", "", "", "", "", "", "", "", "CN7-P07", + "CN7-P12", "CN7-P16", "CN7-P18", "CN9-P10", "CN6-P16", + "CN6-P14", "CN9-P04", "CN9-P02", "CN7-P05", "CN7-P03", + "CN8-P03", "CN8-P02", "", "", "CN6-P34", "CN6-P32", + "CN6-P26", "CN6-P18", "", "", "", ""; +}; + +&r_pio { + gpio-line-names = + /* PL */ + "PMU-SCK", "PMU-SDA", "VBAT-EN", "", "IR-RX", + "WL-WAKE-HOST", "BT-WAKE_HOST", "BT-ENABLE", + "WL-PMU-EN", "", "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", "", "", + + /* PM */ + "CN6-P12", "CN6-P35", "CN7-P40", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", ""; +}; diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts index 2504e7189c54..cadc45255d7b 100644 --- a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts @@ -98,7 +98,7 @@ axp22x: pmic@68 { compatible = "x-powers,axp221"; reg = <0x68>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi index 7de2abd541c1..6bf3fbdd738f 100644 --- a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi @@ -79,7 +79,7 @@ axp22x: pmic@68 { compatible = "x-powers,axp221"; reg = <0x68>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; drivevbus-supply = <®_vcc5v0>; x-powers,drive-vbus-en; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts index 8945dbb114a2..caa935ca4f19 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts @@ -74,12 +74,12 @@ leds { compatible = "gpio-leds"; - green { + led-0 { label = "bananapi-m1-plus:green:usr"; gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; }; - pwr { + led-1 { label = "bananapi-m1-plus:pwr:usr"; gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index 0b3d9ae75650..9d792d7a0f92 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -77,7 +77,7 @@ leds { compatible = "gpio-leds"; - green { + led { label = "bananapi:green:usr"; gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts index 01ccff756996..e22f0e8bb17a 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts @@ -63,12 +63,12 @@ leds { compatible = "gpio-leds"; - blue { + led-0 { label = "bananapro:blue:usr"; gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; }; - green { + led-1 { label = "bananapro:green:usr"; gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; }; @@ -110,7 +110,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-supply = <®_gmac_3v3>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index b8203e4ef21c..e35e6990c4b2 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -75,12 +75,12 @@ leds { compatible = "gpio-leds"; - blue { + led-0 { label = "cubieboard2:blue:usr"; gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; }; - green { + led-1 { label = "cubieboard2:green:usr"; gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 9109ca0919ad..52160e368304 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -75,22 +75,22 @@ leds { compatible = "gpio-leds"; - blue { + led-0 { label = "cubietruck:blue:usr"; gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; }; - orange { + led-1 { label = "cubietruck:orange:usr"; gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; }; - white { + led-2 { label = "cubietruck:white:usr"; gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; }; - green { + led-3 { label = "cubietruck:green:usr"; gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts index 358ed5f1b1c1..b21ddd0ec1c2 100644 --- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts @@ -62,12 +62,12 @@ leds { compatible = "gpio-leds"; - red { + led-0 { label = "i12_tvbox:red:usr"; gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; }; - blue { + led-1 { label = "i12_tvbox:blue:usr"; gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts index 946c27278321..8ff83016ff5a 100644 --- a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts +++ b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts @@ -53,13 +53,13 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_itead_core>; - green { + led-0 { label = "itead_core:green:usr"; gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - blue { + led-1 { label = "itead_core:blue:usr"; gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts index 17fa8901fc00..97518afe4658 100644 --- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts @@ -75,7 +75,7 @@ leds { compatible = "gpio-leds"; - green { + led { label = "lamobo_r1:green:usr"; gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts index 6bff9e731fc3..f161d5238860 100644 --- a/arch/arm/boot/dts/sun7i-a20-m3.dts +++ b/arch/arm/boot/dts/sun7i-a20-m3.dts @@ -64,7 +64,7 @@ leds { compatible = "gpio-leds"; - blue { + led { label = "m3:blue:usr"; gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts index 6f9c54b8e49a..f05ee32bc9cb 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts @@ -75,7 +75,7 @@ leds { compatible = "gpio-leds"; - green { + led { label = "a20-olimex-som-evb:green:usr"; gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts index 230d62a6b8f1..54af6c18075b 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts @@ -46,19 +46,19 @@ leds { compatible = "gpio-leds"; - stat { + led-0 { label = "a20-som204-evb:green:stat"; gpios = <&pio 8 0 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - led1 { + led-1 { label = "a20-som204-evb:green:led1"; gpios = <&pio 8 10 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - led2 { + led-2 { label = "a20-som204-evb:yellow:led2"; gpios = <&pio 8 11 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts index 2adbac860119..92938d022295 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -78,7 +78,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_olinuxinolime>; - green { + led { label = "a20-olinuxino-lime:green:usr"; gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index 9ba62774e89a..8077f1716fbc 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -75,7 +75,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_olinuxinolime>; - green { + led { label = "a20-olinuxino-lime2:green:usr"; gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index 359bd0d5b3b1..a1b89b2a2999 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -82,7 +82,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pins_olinuxino>; - green { + led { label = "a20-olinuxino-micro:green:usr"; gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts index 2e328d2cefc1..84efa01e7cba 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts @@ -75,12 +75,12 @@ leds { compatible = "gpio-leds"; - green { + led-0 { label = "orangepi:green:usr"; gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */ }; - blue { + led-1 { label = "orangepi:blue:usr"; gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */ }; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts index d75b2e2bab28..5d77f1d9818f 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts @@ -64,7 +64,7 @@ leds { compatible = "gpio-leds"; - green { + led { label = "orangepi:green:usr"; gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */ }; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts index bf38c66c1815..e40ecb48d726 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts @@ -72,14 +72,12 @@ leds { compatible = "gpio-leds"; - /* Marked "LED3" on the PCB. */ - usr1 { + led-3 { label = "pcduino3-nano:green:usr1"; gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; /* PH16 */ }; - /* Marked "LED4" on the PCB. */ - usr2 { + led-4 { label = "pcduino3-nano:green:usr2"; gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; /* PH15 */ }; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts index cc8271d777b8..4f8d55d3ba79 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -64,12 +64,12 @@ leds { compatible = "gpio-leds"; - tx { + led-0 { label = "pcduino3:green:tx"; gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; }; - rx { + led-1 { label = "pcduino3:green:rx"; gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts index 6a66b0432dfa..fef02fcbbdf8 100644 --- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts @@ -64,6 +64,7 @@ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ + power-supply = <®_vcc3v3>; }; chosen { diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 6d6a37940db2..5a40e0280665 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -140,7 +140,7 @@ }; thermal-zones { - cpu_thermal { + cpu-thermal { /* milliseconds */ polling-delay-passive = <250>; polling-delay = <1000>; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index c1362d0f0ff8..a42fac676b31 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -716,7 +716,7 @@ #clock-cells = <1>; }; - nmi_intc: interrupt-controller@1f00c00 { + r_intc: interrupt-controller@1f00c00 { compatible = "allwinner,sun6i-a31-r-intc"; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts b/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts index 317763069c0a..065cb620aa99 100644 --- a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts +++ b/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts @@ -63,7 +63,7 @@ pinctrl-names = "default"; pinctrl-0 = <&led_pin_d978>; - home { + led { label = "d978:blue:home"; gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ }; diff --git a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts index a1953b2872d0..8538514c8588 100644 --- a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts +++ b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts @@ -62,7 +62,7 @@ leds { compatible = "gpio-leds"; - green { + led { label = "a33-olinuxino:green:usr"; gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>; }; @@ -98,7 +98,7 @@ axp22x: pmic@3a3 { compatible = "x-powers,axp223"; reg = <0x3a3>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; eldoin-supply = <®_dcdc1>; x-powers,drive-vbus-en; diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts index 785798e3a104..d54a067fc76e 100644 --- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts +++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts @@ -63,6 +63,7 @@ panel { compatible = "netron-dy,e231732"; + power-supply = <®_vcc3v3>; port { panel_input: endpoint { @@ -164,7 +165,7 @@ axp22x: pmic@3a3 { compatible = "x-powers,axp223"; reg = <0x3a3>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; eldoin-supply = <®_dcdc1>; }; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index c458f5fb124f..7344c37107c6 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -288,7 +288,7 @@ }; thermal-zones { - cpu_thermal { + cpu-thermal { /* milliseconds */ polling-delay-passive = <250>; polling-delay = <1000>; diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts index 431f70234d36..b60016a4429c 100644 --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts @@ -74,12 +74,12 @@ leds { compatible = "gpio-leds"; - blue { + led-0 { label = "bananapi-m3:blue:usr"; gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>; }; - green { + led-1 { label = "bananapi-m3:green:usr"; gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts index d8326a5c681d..e26af7cf10e0 100644 --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -74,22 +74,22 @@ leds { compatible = "gpio-leds"; - blue { + led-0 { label = "cubietruck-plus:blue:usr"; gpios = <&pio 3 25 GPIO_ACTIVE_HIGH>; /* PD25 */ }; - orange { + led-1 { label = "cubietruck-plus:orange:usr"; gpios = <&pio 3 26 GPIO_ACTIVE_HIGH>; /* PD26 */ }; - white { + led-2 { label = "cubietruck-plus:white:usr"; gpios = <&pio 3 27 GPIO_ACTIVE_HIGH>; /* PD27 */ }; - green { + led-3 { label = "cubietruck-plus:green:usr"; gpios = <&pio 4 4 GPIO_ACTIVE_HIGH>; /* PE4 */ }; diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts index bfc9bb277a49..83b01b03e08e 100644 --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts @@ -65,7 +65,7 @@ compatible = "pwm-backlight"; pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; enable-gpios = <&pio 3 29 GPIO_ACTIVE_HIGH>; - + power-supply = <®_sw>; brightness-levels = <0 1 2 4 8 16 32 64 128 255>; default-brightness-level = <9>; }; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index c010b27fdb6a..bd898b250e74 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -1061,9 +1061,6 @@ clock-names = "bus", "mod", "ram"; resets = <&ccu RST_BUS_CSI>; status = "disabled"; - - csi_in: port { - }; }; hdmi: hdmi@1ee0000 { diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts index e76d56a3df9c..f3f7a2c912ab 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts @@ -62,6 +62,35 @@ states = <1100000 0>, <1300000 1>; }; + reg_vcc_dram: vcc-dram { + compatible = "regulator-fixed"; + regulator-name = "vcc-dram"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ + vin-supply = <®_vcc5v0>; + }; + + reg_vcc1v2: vcc1v2 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + vin-supply = <®_vcc5v0>; + }; + + poweroff { + compatible = "regulator-poweroff"; + cpu-supply = <®_vcc1v2>; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ @@ -125,6 +154,7 @@ bluetooth { compatible = "brcm,bcm43438-bt"; + max-speed = <1500000>; clocks = <&rtc 1>; clock-names = "lpo"; vbat-supply = <®_vcc3v3>; diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts index 45a24441ff18..62b5280ec093 100644 --- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts +++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts @@ -75,13 +75,13 @@ leds { compatible = "gpio-leds"; - blue { + led-0 { label = "beelink-x2:blue:pwr"; gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ default-state = "on"; }; - red { + led-1 { label = "beelink-x2:red:standby"; gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ }; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts index 6b149271ef13..8e7dfcffe1fb 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts @@ -25,13 +25,13 @@ leds { compatible = "gpio-leds"; - pwr { + led-0 { label = "nanopi:red:pwr"; gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ default-state = "on"; }; - status { + led-1 { label = "nanopi:green:status"; gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */ }; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts index 07867a0d569b..be49eabbff94 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts @@ -61,13 +61,13 @@ leds { compatible = "gpio-leds"; - pwr { + led-0 { label = "nanopi:green:pwr"; gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ default-state = "on"; }; - status { + led-1 { label = "nanopi:blue:status"; gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */ }; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts index 204a39f93f4e..26e2e6172e0d 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts @@ -39,8 +39,8 @@ regulator-ramp-delay = <50>; gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ gpios-states = <0x1>; - states = <1100000 0x0 - 1300000 0x1>; + states = <1100000 0x0>, + <1300000 0x1>; }; wifi_pwrseq: wifi_pwrseq { diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi index 4df29a65316d..c7c3e7d8b3c8 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi +++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi @@ -60,13 +60,13 @@ leds { compatible = "gpio-leds"; - status { + led-0 { label = "nanopi:blue:status"; gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; - pwr { + led-1 { label = "nanopi:green:pwr"; gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts index 251bbab7d707..561ea1d2f861 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts @@ -73,13 +73,13 @@ leds { compatible = "gpio-leds"; - pwr { + led-0 { label = "orangepi:green:pwr"; gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - status { + led-1 { label = "orangepi:red:status"; gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts index e1c75f7fa3ca..293016d081cd 100644 --- a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts +++ b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts @@ -64,17 +64,17 @@ leds { compatible = "gpio-leds"; - blue { + led-0 { label = "bpi-m2m:blue:usr"; gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; }; - green { + led-1 { label = "bpi-m2m:green:usr"; gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; }; - red { + led-2 { label = "bpi-m2m:red:power"; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; default-state = "on"; @@ -163,7 +163,7 @@ axp22x: pmic@3a3 { compatible = "x-powers,axp223"; reg = <0x3a3>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; eldoin-supply = <®_dcdc1>; x-powers,drive-vbus-en; diff --git a/arch/arm/boot/dts/sun8i-r16-parrot.dts b/arch/arm/boot/dts/sun8i-r16-parrot.dts index 4f48eec6b2ef..2be1b76fe2f6 100644 --- a/arch/arm/boot/dts/sun8i-r16-parrot.dts +++ b/arch/arm/boot/dts/sun8i-r16-parrot.dts @@ -64,14 +64,14 @@ leds { compatible = "gpio-leds"; - led1 { + led-1 { label = "parrot:led1:usr"; - gpio = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */ + gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */ }; - led2 { + led-2 { label = "parrot:led2:usr"; - gpio = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */ + gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */ }; }; @@ -164,7 +164,7 @@ axp22x: pmic@3a3 { compatible = "x-powers,axp223"; reg = <0x3a3>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; drivevbus-supply = <®_vcc5v0>; x-powers,drive-vbus-en; diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index 7907569e7b5c..d5ad3b9efd12 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -190,6 +190,25 @@ }; }; + deinterlace: deinterlace@1400000 { + compatible = "allwinner,sun8i-r40-deinterlace", + "allwinner,sun8i-h3-deinterlace"; + reg = <0x01400000 0x20000>; + clocks = <&ccu CLK_BUS_DEINTERLACE>, + <&ccu CLK_DEINTERLACE>, + /* + * NOTE: Contrary to what datasheet claims, + * DRAM deinterlace gate doesn't exist and + * it's shared with CSI1. + */ + <&ccu CLK_DRAM_CSI1>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_DEINTERLACE>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&mbus 9>; + interconnect-names = "dma-mem"; + }; + syscon: system-control@1c00000 { compatible = "allwinner,sun8i-r40-system-control", "allwinner,sun4i-a10-system-control"; diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi index b3d8b8f056cd..797d61cff11e 100644 --- a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi @@ -54,6 +54,7 @@ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ + power-supply = <®_dc1sw>; }; chosen { @@ -92,7 +93,7 @@ axp22x: pmic@3a3 { compatible = "x-powers,axp223"; reg = <0x3a3>; - interrupt-parent = <&nmi_intc>; + interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; eldoin-supply = <®_dcdc1>; drivevbus-supply = <®_vcc5v0>; diff --git a/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi b/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi index 24d507cdbcf9..052b010a5607 100644 --- a/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi +++ b/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi @@ -39,6 +39,6 @@ }; &usbphy { - usb0_id_det-gpio = <&pio 5 6 GPIO_ACTIVE_HIGH>; + usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-s3-pinecube.dts b/arch/arm/boot/dts/sun8i-s3-pinecube.dts index 4aa0ee897a0a..20966e954eda 100644 --- a/arch/arm/boot/dts/sun8i-s3-pinecube.dts +++ b/arch/arm/boot/dts/sun8i-s3-pinecube.dts @@ -64,9 +64,6 @@ status = "okay"; port { - #address-cells = <1>; - #size-cells = <0>; - csi1_ep: endpoint { remote-endpoint = <&ov5640_ep>; bus-width = <8>; @@ -88,13 +85,9 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp203", - "x-powers,axp209"; reg = <0x34>; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <1>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm/boot/dts/sun8i-v3-sl631-imx179.dts b/arch/arm/boot/dts/sun8i-v3-sl631-imx179.dts new file mode 100644 index 000000000000..117aeece4e55 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-v3-sl631-imx179.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR X11) +/* + * Copyright 2020 Paul Kocialkowski <contact@paulk.fr> + */ + +#include "sun8i-v3-sl631.dtsi" + +/ { + model = "SL631 Action Camera with IMX179"; + compatible = "allwinner,sl631-imx179", "allwinner,sl631", + "allwinner,sun8i-v3"; +}; diff --git a/arch/arm/boot/dts/sun8i-v3-sl631.dtsi b/arch/arm/boot/dts/sun8i-v3-sl631.dtsi new file mode 100644 index 000000000000..e0d2a31efc7f --- /dev/null +++ b/arch/arm/boot/dts/sun8i-v3-sl631.dtsi @@ -0,0 +1,138 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR X11) +/* + * Copyright 2020 Paul Kocialkowski <contact@paulk.fr> + */ + +/dts-v1/; + +#include "sun8i-v3.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "SL631 Action Camera"; + compatible = "allwinner,sl631", "allwinner,sun8i-v3"; + + aliases { + serial0 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&i2c0 { + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pb_pins>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button-174 { + label = "Down"; + linux,code = <KEY_DOWN>; + channel = <0>; + voltage = <174603>; + }; + + button-384 { + label = "Up"; + linux,code = <KEY_UP>; + channel = <0>; + voltage = <384126>; + }; + + button-593 { + label = "OK"; + linux,code = <KEY_OK>; + channel = <0>; + voltage = <593650>; + }; +}; + +&mmc0 { + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + bus-width = <4>; + vmmc-supply = <®_dcdc3>; + status = "okay"; +}; + +&pio { + vcc-pd-supply = <®_dcdc3>; + vcc-pe-supply = <®_dcdc3>; +}; + +#include "axp209.dtsi" + +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-sys-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vdd-3v3"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +&spi0 { + status = "okay"; + + spi-flash@0 { + reg = <0>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + }; +}; + +&uart1 { + pinctrl-0 = <&uart1_pg_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index f8f19d8fa795..eb4cb63fef13 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -157,12 +157,21 @@ syscon: system-control@1c00000 { compatible = "allwinner,sun8i-v3s-system-control", "allwinner,sun8i-h3-system-control"; - reg = <0x01c00000 0x1000>; + reg = <0x01c00000 0xd0>; #address-cells = <1>; #size-cells = <1>; ranges; }; + nmi_intc: interrupt-controller@1c000d0 { + compatible = "allwinner,sun8i-v3s-nmi", + "allwinner,sun9i-a80-nmi"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x01c000d0 0x0c>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + }; + tcon0: lcd-controller@1c0c000 { compatible = "allwinner,sun8i-v3s-tcon"; reg = <0x01c0c000 0x1000>; @@ -329,6 +338,12 @@ #interrupt-cells = <3>; /omit-if-no-ref/ + csi0_mclk_pin: csi0-mclk-pin { + pins = "PE20"; + function = "csi_mipi"; + }; + + /omit-if-no-ref/ csi1_8bit_pins: csi1-8bit-pins { pins = "PE0", "PE2", "PE3", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts index 484b93df20cb..1fe251ea94bc 100644 --- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts +++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts @@ -63,12 +63,12 @@ leds { compatible = "gpio-leds"; - green { + led-0 { label = "cubieboard4:green:usr"; gpios = <&pio 7 17 GPIO_ACTIVE_HIGH>; /* PH17 */ }; - red { + led-1 { label = "cubieboard4:red:usr"; gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ }; diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi index 8e5cb3b3fd68..7a6af54dd342 100644 --- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi +++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi @@ -219,6 +219,7 @@ bluetooth { compatible = "brcm,bcm43438-bt"; + max-speed = <1500000>; clocks = <&rtc 1>; clock-names = "lpo"; vbat-supply = <®_vcc3v3>; diff --git a/arch/arm/boot/dts/tango4-common.dtsi b/arch/arm/boot/dts/tango4-common.dtsi deleted file mode 100644 index d584da314500..000000000000 --- a/arch/arm/boot/dts/tango4-common.dtsi +++ /dev/null @@ -1,184 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Based on Mans Rullgard's Tango3 DT - * https://github.com/mansr/linux-tangox - */ - -#include <dt-bindings/interrupt-controller/arm-gic.h> - -#define CPU_CLK 0 -#define SYS_CLK 1 -#define USB_CLK 2 -#define SDIO_CLK 3 - -/ { - interrupt-parent = <&gic>; - #address-cells = <1>; - #size-cells = <1>; - - periph_clk: periph_clk { - compatible = "fixed-factor-clock"; - clocks = <&clkgen CPU_CLK>; - clock-mult = <1>; - clock-div = <2>; - #clock-cells = <0>; - }; - - mpcore { - compatible = "simple-bus"; - ranges = <0x00000000 0x20000000 0x2000>; - #address-cells = <1>; - #size-cells = <1>; - - scu@0 { - compatible = "arm,cortex-a9-scu"; - reg = <0x0 0x100>; - }; - - twd@600 { - compatible = "arm,cortex-a9-twd-timer"; - reg = <0x600 0x10>; - interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>; - clocks = <&periph_clk>; - always-on; - }; - - gic: interrupt-controller@1000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x1000 0x1000>, <0x100 0x100>; - }; - }; - - l2cc: cache-controller@20100000 { - compatible = "arm,pl310-cache"; - reg = <0x20100000 0x1000>; - cache-level = <2>; - cache-unified; - }; - - soc { - compatible = "simple-bus"; - interrupt-parent = <&irq0>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - xtal: xtal { - compatible = "fixed-clock"; - clock-frequency = <27000000>; - #clock-cells = <0>; - }; - - clkgen: clkgen@10000 { - compatible = "sigma,tango4-clkgen"; - reg = <0x10000 0x100>; - clocks = <&xtal>; - #clock-cells = <1>; - }; - - tick-counter@10048 { - compatible = "sigma,tick-counter"; - reg = <0x10048 0x4>; - clocks = <&xtal>; - }; - - uart: serial@10700 { - compatible = "ralink,rt2880-uart", "ns16550a"; - reg = <0x10700 0x30>; - interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <7372800>; - reg-shift = <2>; - }; - - watchdog@1fd00 { - compatible = "sigma,smp8759-wdt"; - reg = <0x1fd00 8>; - clocks = <&xtal>; - }; - - mmc0: mmc@21000 { - compatible = "arasan,sdhci-8.9a"; - reg = <0x21000 0x200>; - clock-names = "clk_xin", "clk_ahb"; - clocks = <&clkgen SDIO_CLK>, <&clkgen SYS_CLK>; - interrupts = <60 IRQ_TYPE_LEVEL_HIGH>; - }; - - mmc1: mmc@21200 { - compatible = "arasan,sdhci-8.9a"; - reg = <0x21200 0x200>; - clock-names = "clk_xin", "clk_ahb"; - clocks = <&clkgen SDIO_CLK>, <&clkgen SYS_CLK>; - interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; - }; - - usb0: usb@21400 { - compatible = "chipidea,usb2"; - reg = <0x21400 0x200>; - interrupts = <40 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usb0_phy>; - phy-names = "usb-phy"; - }; - - usb0_phy: phy@21700 { - compatible = "sigma,smp8642-usb-phy"; - reg = <0x21700 0x100>; - #phy-cells = <0>; - clocks = <&clkgen USB_CLK>; - }; - - usb1: usb@25400 { - compatible = "chipidea,usb2"; - reg = <0x25400 0x200>; - interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usb1_phy>; - phy-names = "usb-phy"; - }; - - usb1_phy: phy@25700 { - compatible = "sigma,smp8642-usb-phy"; - reg = <0x25700 0x100>; - #phy-cells = <0>; - clocks = <&clkgen USB_CLK>; - }; - - eth0: ethernet@26000 { - compatible = "sigma,smp8734-ethernet"; - reg = <0x26000 0x800>; - interrupts = <38 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clkgen SYS_CLK>; - }; - - intc: interrupt-controller@6e000 { - compatible = "sigma,smp8642-intc"; - reg = <0x6e000 0x400>; - ranges = <0 0x6e000 0x400>; - interrupt-parent = <&gic>; - #address-cells = <1>; - #size-cells = <1>; - - irq0: irq0@0 { - reg = <0x000 0x100>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; - }; - - irq1: irq1@100 { - reg = <0x100 0x100>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; - }; - - irq2: irq2@300 { - reg = <0x300 0x100>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/tango4-smp8758.dtsi b/arch/arm/boot/dts/tango4-smp8758.dtsi deleted file mode 100644 index 1c6a5bf1a86b..000000000000 --- a/arch/arm/boot/dts/tango4-smp8758.dtsi +++ /dev/null @@ -1,57 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "tango4-common.dtsi" - -/ { - cpus { - #address-cells = <1>; - #size-cells = <0>; - enable-method = "sigma,tango4-smp"; - - cpu0: cpu@0 { - compatible = "arm,cortex-a9"; - next-level-cache = <&l2cc>; - device_type = "cpu"; - reg = <0>; - clocks = <&clkgen CPU_CLK>; - clock-latency = <1>; - }; - - cpu1: cpu@1 { - compatible = "arm,cortex-a9"; - next-level-cache = <&l2cc>; - device_type = "cpu"; - reg = <1>; - }; - }; - - pmu { - compatible = "arm,cortex-a9-pmu"; - interrupt-affinity = <&cpu0>, <&cpu1>; - interrupts = - <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; - }; - - soc { - cpu_temp: thermal@920100 { - #thermal-sensor-cells = <0>; - compatible = "sigma,smp8758-thermal"; - reg = <0x920100 12>; - }; - }; - - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay = <997>; /* milliseconds */ - polling-delay-passive = <499>; /* milliseconds */ - thermal-sensors = <&cpu_temp>; - trips { - cpu_critical { - temperature = <120000>; - hysteresis = <2500>; - type = "critical"; - }; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/tango4-vantage-1172.dts b/arch/arm/boot/dts/tango4-vantage-1172.dts deleted file mode 100644 index d237d7f02c51..000000000000 --- a/arch/arm/boot/dts/tango4-vantage-1172.dts +++ /dev/null @@ -1,42 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include "tango4-smp8758.dtsi" - -/ { - model = "Sigma Designs SMP8758 Vantage-1172 Rev E1"; - compatible = "sigma,vantage-1172", "sigma,smp8758", "sigma,tango4"; - - aliases { - serial = &uart; - eth0 = ð0; - }; - - memory@80000000 { - device_type = "memory"; - reg = <0x80000000 0x80000000>; /* 2 GB */ - }; - - chosen { - stdout-path = "serial:115200n8"; - }; -}; - -ð0 { - phy-connection-type = "rgmii-id"; - phy-handle = <ð0_phy>; - #address-cells = <1>; - #size-cells = <0>; - - /* Atheros AR8035 */ - eth0_phy: ethernet-phy@4 { - compatible = "ethernet-phy-id004d.d072", - "ethernet-phy-ieee802.3-c22"; - interrupts = <37 IRQ_TYPE_EDGE_RISING>; - reg = <4>; - }; -}; - -&mmc1 { - non-removable; /* eMMC */ -}; diff --git a/arch/arm/boot/dts/tegra30-ouya.dts b/arch/arm/boot/dts/tegra30-ouya.dts index 74da1360d297..0368b3b816ef 100644 --- a/arch/arm/boot/dts/tegra30-ouya.dts +++ b/arch/arm/boot/dts/tegra30-ouya.dts @@ -4352,8 +4352,8 @@ nvidia,pins = "cam_mclk_pcc0"; nvidia,function = "vi_alt3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_ENABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; pcc1 { nvidia,pins = "pcc1"; diff --git a/arch/arm/boot/dts/zx296702-ad1.dts b/arch/arm/boot/dts/zx296702-ad1.dts deleted file mode 100644 index bd9400840023..000000000000 --- a/arch/arm/boot/dts/zx296702-ad1.dts +++ /dev/null @@ -1,48 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 - -/dts-v1/; - -#include "zx296702.dtsi" - -/ { - model = "ZTE ZX296702 AD1 Board"; - compatible = "zte,zx296702-ad1", "zte,zx296702"; - - aliases { - serial0 = &uart0; - serial1 = &uart1; - }; - - memory { - device_type = "memory"; - reg = <0x50000000 0x20000000>; - }; -}; - -&mmc0 { - supports-highspeed; - non-removable; - disable-wp; - status = "okay"; - - slot@0 { - reg = <0>; - bus-width = <4>; - }; -}; - -&mmc1 { - supports-highspeed; - non-removable; - disable-wp; - status = "okay"; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; -}; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/zx296702.dtsi b/arch/arm/boot/dts/zx296702.dtsi deleted file mode 100644 index f378c661b3bf..000000000000 --- a/arch/arm/boot/dts/zx296702.dtsi +++ /dev/null @@ -1,142 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 - -#include <dt-bindings/clock/zx296702-clock.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> - -/ { - #address-cells = <1>; - #size-cells = <1>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - enable-method = "zte,zx296702-smp"; - - cpu@0 { - compatible = "arm,cortex-a9"; - device_type = "cpu"; - next-level-cache = <&l2cc>; - reg = <0>; - }; - - cpu@1 { - compatible = "arm,cortex-a9"; - device_type = "cpu"; - next-level-cache = <&l2cc>; - reg = <1>; - }; - }; - - - soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&intc>; - ranges; - - matrix: bus-matrix@400000 { - compatible = "zte,zx-bus-matrix"; - reg = <0x00400000 0x1000>; - }; - - intc: interrupt-controller@801000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - #address-cells = <1>; - #size-cells = <1>; - interrupt-controller; - reg = <0x00801000 0x1000>, - <0x00800100 0x100>; - }; - - global_timer: timer@8000200 { - compatible = "arm,cortex-a9-global-timer"; - reg = <0x00800200 0x20>; - interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&intc>; - clocks = <&topclk ZX296702_A9_PERIPHCLK>; - }; - - l2cc: cache-controller@c00000 { - compatible = "arm,pl310-cache"; - reg = <0x00c00000 0x1000>; - cache-unified; - cache-level = <2>; - arm,data-latency = <1 1 1>; - arm,tag-latency = <1 1 1>; - arm,double-linefill = <1>; - arm,double-linefill-incr = <0>; - }; - - pcu: pcu@a0008000 { - compatible = "zte,zx296702-pcu"; - reg = <0xa0008000 0x1000>; - }; - - topclk: topclk@9800000 { - compatible = "zte,zx296702-topcrm-clk"; - reg = <0x09800000 0x1000>; - #clock-cells = <1>; - }; - - lsp1clk: lsp1clk@9400000 { - compatible = "zte,zx296702-lsp1crpm-clk"; - reg = <0x09400000 0x1000>; - #clock-cells = <1>; - }; - - lsp0clk: lsp0clk@b000000 { - compatible = "zte,zx296702-lsp0crpm-clk"; - reg = <0x0b000000 0x1000>; - #clock-cells = <1>; - }; - - uart0: serial@9405000 { - compatible = "zte,zx296702-uart"; - reg = <0x09405000 0x1000>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&lsp1clk ZX296702_UART0_WCLK>; - status = "disabled"; - }; - - uart1: serial@9406000 { - compatible = "zte,zx296702-uart"; - reg = <0x09406000 0x1000>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&lsp1clk ZX296702_UART1_WCLK>; - status = "disabled"; - }; - - mmc0: mmc@9408000 { - compatible = "snps,dw-mshc"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x09408000 0x1000>; - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; - fifo-depth = <32>; - clocks = <&lsp1clk ZX296702_SDMMC0_PCLK>, - <&lsp1clk ZX296702_SDMMC0_WCLK>; - clock-names = "biu", "ciu"; - status = "disabled"; - }; - - mmc1: mmc@b003000 { - compatible = "snps,dw-mshc"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0b003000 0x1000>; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; - fifo-depth = <32>; - clocks = <&lsp0clk ZX296702_SDMMC1_PCLK>, - <&lsp0clk ZX296702_SDMMC1_WCLK>; - clock-names = "biu", "ciu"; - status = "disabled"; - }; - - sysctrl: sysctrl@a0007000 { - compatible = "zte,sysctrl", "syscon"; - reg = <0xa0007000 0x1000>; - }; - }; -}; diff --git a/arch/arm/boot/dts/zynq-ebaz4205.dts b/arch/arm/boot/dts/zynq-ebaz4205.dts new file mode 100644 index 000000000000..b0b836aedd76 --- /dev/null +++ b/arch/arm/boot/dts/zynq-ebaz4205.dts @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021 Michael Walle <michael@walle.cc> + */ +/dts-v1/; +/include/ "zynq-7000.dtsi" + +/ { + model = "Ebang EBAZ4205"; + compatible = "ebang,ebaz4205", "xlnx,zynq-7000"; + + aliases { + ethernet0 = &gem0; + serial0 = &uart1; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x10000000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&clkc { + ps-clk-frequency = <33333333>; + fclk-enable = <8>; +}; + +&gem0 { + status = "okay"; + phy-mode = "mii"; + phy-handle = <&phy>; + + /* PHY clock */ + assigned-clocks = <&clkc 18>; + assigned-clock-rates = <25000000>; + + phy: ethernet-phy@0 { + reg = <0>; + }; +}; + +&gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio0_default>; +}; + +&pinctrl0 { + pinctrl_gpio0_default: gpio0-default { + mux { + groups = "gpio0_20_grp", "gpio0_32_grp"; + function = "gpio0"; + }; + + conf { + groups = "gpio0_20_grp", "gpio0_32_grp"; + io-standard = <3>; + slew-rate = <0>; + }; + + conf-pull-up { + pins = "MIO20", "MIO32"; + bias-disable; + }; + }; + + pinctrl_sdhci0_default: sdhci0-default { + mux { + groups = "sdio0_2_grp"; + function = "sdio0"; + }; + + conf { + groups = "sdio0_2_grp"; + io-standard = <3>; + slew-rate = <0>; + bias-disable; + }; + + mux-cd { + groups = "gpio0_34_grp"; + function = "sdio0_cd"; + }; + + conf-cd { + groups = "gpio0_34_grp"; + io-standard = <3>; + slew-rate = <0>; + bias-high-impedance; + bias-pull-up; + }; + }; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_4_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_4_grp"; + io-standard = <3>; + slew-rate = <0>; + }; + + conf-rx { + pins = "MIO25"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO24"; + bias-disable; + }; + }; +}; + +&sdhci0 { + status = "okay"; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci0_default>; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; +}; diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index c0c219d53b24..6403b064e8dc 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -17,8 +17,7 @@ CONFIG_SOC_SAM9X60=y # CONFIG_ATMEL_CLOCKSOURCE_PIT is not set CONFIG_AEABI=y CONFIG_UACCESS_WITH_MEMCPY=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 +# CONFIG_ATAGS is not set CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw" @@ -38,6 +37,8 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y # CONFIG_INET_DIAG is not set CONFIG_IPV6_SIT_6RD=y +CONFIG_CAN=y +CONFIG_CAN_AT91=y CONFIG_CFG80211=y CONFIG_MAC80211=y CONFIG_DEVTMPFS=y @@ -57,8 +58,8 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=4 CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_TCLIB=y CONFIG_ATMEL_SSC=y +CONFIG_EEPROM_AT24=m CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_LOWLEVEL is not set @@ -92,7 +93,6 @@ CONFIG_RT2800USB_UNKNOWN=y CONFIG_RTL8187=m CONFIG_RTL8192CU=m # CONFIG_RTLWIFI_DEBUG is not set -CONFIG_INPUT_POLLDEV=y CONFIG_INPUT_JOYDEV=y CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set @@ -107,13 +107,16 @@ CONFIG_LEGACY_PTY_COUNT=4 CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_HW_RANDOM=y +CONFIG_I2C_CHARDEV=y CONFIG_I2C_AT91=y CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y CONFIG_SPI_ATMEL_QUADSPI=y +CONFIG_SPI_GPIO=y +CONFIG_PINCTRL_MCP23S08=m +CONFIG_GPIO_SYSFS=y CONFIG_POWER_RESET=y -# CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC is not set CONFIG_POWER_SUPPLY=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y @@ -131,6 +134,7 @@ CONFIG_MEDIA_PLATFORM_SUPPORT=y CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_VIDEO_ATMEL_ISI=y CONFIG_VIDEO_OV2640=m +CONFIG_VIDEO_OV7740=m CONFIG_VIDEO_MT9V032=m CONFIG_DRM=y CONFIG_DRM_ATMEL_HLCDC=y @@ -209,7 +213,9 @@ CONFIG_NLS_UTF8=y CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_SKCIPHER=m -# CONFIG_CRYPTO_HW is not set +CONFIG_CRYPTO_DEV_ATMEL_AES=y +CONFIG_CRYPTO_DEV_ATMEL_TDES=y +CONFIG_CRYPTO_DEV_ATMEL_SHA=y CONFIG_CRC_CCITT=y CONFIG_FONTS=y CONFIG_FONT_8x8=y diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig index 44ff9cd88d81..1ef2bc4c7f69 100644 --- a/arch/arm/configs/bcm2835_defconfig +++ b/arch/arm/configs/bcm2835_defconfig @@ -21,7 +21,6 @@ CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y # CONFIG_COMPAT_BRK is not set CONFIG_PROFILING=y -CONFIG_OPROFILE=y CONFIG_JUMP_LABEL=y CONFIG_CC_STACKPROTECTOR_REGULAR=y CONFIG_MODULES=y diff --git a/arch/arm/configs/cns3420vb_defconfig b/arch/arm/configs/cns3420vb_defconfig index 66a80b46038d..63fa2eb21b75 100644 --- a/arch/arm/configs/cns3420vb_defconfig +++ b/arch/arm/configs/cns3420vb_defconfig @@ -11,7 +11,6 @@ CONFIG_BLK_DEV_INITRD=y # CONFIG_PERF_EVENTS is not set CONFIG_SLAB=y CONFIG_PROFILING=y -CONFIG_OPROFILE=m CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index 911e880f06ed..15b749f6996d 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -5,7 +5,6 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y CONFIG_PROFILING=y -CONFIG_OPROFILE=m CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y diff --git a/arch/arm/configs/efm32_defconfig b/arch/arm/configs/efm32_defconfig deleted file mode 100644 index 46213f0530c4..000000000000 --- a/arch/arm/configs/efm32_defconfig +++ /dev/null @@ -1,98 +0,0 @@ -CONFIG_HIGH_RES_TIMERS=y -CONFIG_LOG_BUF_SHIFT=12 -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -# CONFIG_UID16 is not set -# CONFIG_BASE_FULL is not set -# CONFIG_FUTEX is not set -# CONFIG_EPOLL is not set -# CONFIG_SIGNALFD is not set -# CONFIG_EVENTFD is not set -# CONFIG_AIO is not set -CONFIG_EMBEDDED=y -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_SLUB_DEBUG is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_MMU is not set -CONFIG_ARM_SINGLE_ARMV7M=y -CONFIG_ARCH_EFM32=y -CONFIG_SET_MEM_PARAM=y -CONFIG_DRAM_BASE=0x88000000 -CONFIG_DRAM_SIZE=0x00400000 -CONFIG_FLASH_MEM_BASE=0x8c000000 -CONFIG_FLASH_SIZE=0x01000000 -CONFIG_PREEMPT=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_XIP_KERNEL=y -CONFIG_XIP_PHYS_ADDR=0x8c000000 -CONFIG_BINFMT_FLAT=y -CONFIG_BINFMT_SHARED_FLAT=y -# CONFIG_COREDUMP is not set -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -# CONFIG_FW_LOADER is not set -CONFIG_MTD=y -CONFIG_MTD_BLOCK_RO=y -CONFIG_MTD_ROM=y -CONFIG_MTD_UCLINUX=y -# CONFIG_BLK_DEV is not set -CONFIG_NETDEVICES=y -# CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_CADENCE is not set -# CONFIG_NET_VENDOR_BROADCOM is not set -# CONFIG_NET_VENDOR_CIRRUS is not set -# CONFIG_NET_VENDOR_FARADAY is not set -# CONFIG_NET_VENDOR_INTEL is not set -# CONFIG_NET_VENDOR_MARVELL is not set -CONFIG_KS8851=y -# CONFIG_NET_VENDOR_MICROCHIP is not set -# CONFIG_NET_VENDOR_NATSEMI is not set -# CONFIG_NET_VENDOR_SEEQ is not set -# CONFIG_NET_VENDOR_SMSC is not set -# CONFIG_NET_VENDOR_STMICRO is not set -# CONFIG_NET_VENDOR_VIA is not set -# CONFIG_NET_VENDOR_WIZNET is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -# CONFIG_UNIX98_PTYS is not set -# CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_NONSTANDARD=y -# CONFIG_DEVKMEM is not set -CONFIG_SERIAL_EFM32_UART=y -CONFIG_SERIAL_EFM32_UART_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -# CONFIG_I2C_COMPAT is not set -CONFIG_I2C_EFM32=y -CONFIG_SPI=y -CONFIG_SPI_EFM32=y -CONFIG_GPIO_SYSFS=y -# CONFIG_USB_SUPPORT is not set -CONFIG_MMC=y -CONFIG_MMC_SPI=y -CONFIG_EXT2_FS=y -# CONFIG_FILE_LOCKING is not set -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set -CONFIG_ROMFS_FS=y -CONFIG_ROMFS_BACKED_BY_MTD=y -# CONFIG_NETWORK_FILESYSTEMS is not set -CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_INFO=y -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_SCHED_DEBUG is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_FTRACE is not set diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index bb70acc6b526..1d9fa77bbafc 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -27,7 +27,6 @@ CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_PM_DEBUG=y -CONFIG_OPROFILE=y CONFIG_KPROBES=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 221f5c340c86..70928cc48939 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -222,6 +222,7 @@ CONFIG_POWER_RESET=y CONFIG_POWER_RESET_SYSCON=y CONFIG_POWER_RESET_SYSCON_POWEROFF=y CONFIG_POWER_SUPPLY=y +CONFIG_RN5T618_POWER=m CONFIG_SENSORS_MC13783_ADC=y CONFIG_SENSORS_GPIO_FAN=y CONFIG_SENSORS_IIO_HWMON=y diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig index 84a3b055f253..33c917df7b32 100644 --- a/arch/arm/configs/keystone_defconfig +++ b/arch/arm/configs/keystone_defconfig @@ -16,7 +16,6 @@ CONFIG_KALLSYMS_ALL=y # CONFIG_BASE_FULL is not set CONFIG_EMBEDDED=y CONFIG_PROFILING=y -CONFIG_OPROFILE=y CONFIG_KPROBES=y CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig index e00be9faa23b..9f862b21b40a 100644 --- a/arch/arm/configs/multi_v5_defconfig +++ b/arch/arm/configs/multi_v5_defconfig @@ -67,7 +67,6 @@ CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_IDLE=y CONFIG_ARM_KIRKWOOD_CPUIDLE=y -CONFIG_OPROFILE=y CONFIG_KPROBES=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y @@ -105,7 +104,6 @@ CONFIG_MTD_SPI_NOR=y CONFIG_SPI_ASPEED_SMC=y CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y -CONFIG_ATMEL_TCLIB=y CONFIG_ATMEL_SSC=m CONFIG_EEPROM_AT24=y # CONFIG_SCSI_PROC_FS is not set diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index c5f25710fedc..3823da605430 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -6,6 +6,7 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y CONFIG_ARCH_VIRT=y +CONFIG_ARCH_ACTIONS=y CONFIG_ARCH_ALPINE=y CONFIG_ARCH_ARTPEC=y CONFIG_MACH_ARTPEC6=y @@ -223,7 +224,6 @@ CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_VIRTIO_BLK=y CONFIG_AD525X_DPOT=y CONFIG_AD525X_DPOT_I2C=y -CONFIG_ATMEL_TCLIB=y CONFIG_ICS932S401=y CONFIG_ATMEL_SSC=m CONFIG_QCOM_COINCELL=m @@ -377,6 +377,8 @@ CONFIG_SERIAL_ST_ASC=y CONFIG_SERIAL_ST_ASC_CONSOLE=y CONFIG_SERIAL_STM32=y CONFIG_SERIAL_STM32_CONSOLE=y +CONFIG_SERIAL_OWL=y +CONFIG_SERIAL_OWL_CONSOLE=y CONFIG_SERIAL_DEV_BUS=y CONFIG_VIRTIO_CONSOLE=y CONFIG_ASPEED_KCS_IPMI_BMC=m @@ -401,6 +403,7 @@ CONFIG_I2C_EMEV2=m CONFIG_I2C_IMX=y CONFIG_I2C_MESON=y CONFIG_I2C_MV64XXX=y +CONFIG_I2C_OWL=y CONFIG_I2C_RIIC=y CONFIG_I2C_RK3X=y CONFIG_I2C_S3C2410=y @@ -449,6 +452,8 @@ CONFIG_PINCTRL_AS3722=y CONFIG_PINCTRL_RZA2=y CONFIG_PINCTRL_STMFX=y CONFIG_PINCTRL_PALMAS=y +CONFIG_PINCTRL_OWL=y +CONFIG_PINCTRL_S500=y CONFIG_PINCTRL_APQ8064=y CONFIG_PINCTRL_APQ8084=y CONFIG_PINCTRL_IPQ8064=y @@ -515,7 +520,9 @@ CONFIG_ARMADA_THERMAL=y CONFIG_BCM2711_THERMAL=m CONFIG_BCM2835_THERMAL=m CONFIG_BRCMSTB_THERMAL=m +CONFIG_GENERIC_ADC_THERMAL=m CONFIG_ST_THERMAL_MEMMAP=y +CONFIG_TEGRA_SOCTHERM=m CONFIG_UNIPHIER_THERMAL=y CONFIG_DA9063_WATCHDOG=m CONFIG_XILINX_WATCHDOG=y @@ -656,6 +663,7 @@ CONFIG_V4L_TEST_DRIVERS=y CONFIG_VIDEO_VIVID=m CONFIG_CEC_PLATFORM_DRIVERS=y CONFIG_CEC_SAMSUNG_S5P=m +CONFIG_CEC_STM32=m CONFIG_VIDEO_ADV7180=m CONFIG_VIDEO_ADV7604=m CONFIG_VIDEO_ADV7604_CEC=y @@ -878,6 +886,7 @@ CONFIG_MMC_SH_MMCIF=y CONFIG_MMC_SUNXI=y CONFIG_MMC_BCM2835=y CONFIG_MMC_SDHCI_OMAP=y +CONFIG_MMC_OWL=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_CLASS_FLASH=m @@ -947,6 +956,7 @@ CONFIG_IMX_DMA=y CONFIG_IMX_SDMA=y CONFIG_MV_XOR=y CONFIG_MXS_DMA=y +CONFIG_OWL_DMA=y CONFIG_PL330_DMA=y CONFIG_SIRF_DMA=y CONFIG_STE_DMA40=y @@ -977,6 +987,8 @@ CONFIG_COMMON_CLK_MAX77686=y CONFIG_COMMON_CLK_RK808=m CONFIG_COMMON_CLK_SCMI=y CONFIG_COMMON_CLK_S2MPS11=m +CONFIG_CLK_ACTIONS=y +CONFIG_CLK_OWL_S500=y CONFIG_CLK_RASPBERRYPI=y CONFIG_COMMON_CLK_QCOM=y CONFIG_QCOM_CLK_RPM=y @@ -1107,6 +1119,7 @@ CONFIG_ROCKCHIP_EFUSE=m CONFIG_NVMEM_SUNXI_SID=y CONFIG_NVMEM_VF610_OCOTP=y CONFIG_MESON_MX_EFUSE=m +CONFIG_NVMEM_RMEM=m CONFIG_FSI=m CONFIG_FSI_MASTER_GPIO=m CONFIG_FSI_MASTER_HUB=m diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig index b39b1300a459..cd703c15798f 100644 --- a/arch/arm/configs/mv78xx0_defconfig +++ b/arch/arm/configs/mv78xx0_defconfig @@ -5,7 +5,6 @@ CONFIG_EXPERT=y CONFIG_KALLSYMS_ALL=y # CONFIG_SLUB_DEBUG is not set CONFIG_PROFILING=y -CONFIG_OPROFILE=y CONFIG_KPROBES=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y diff --git a/arch/arm/configs/mvebu_v5_defconfig b/arch/arm/configs/mvebu_v5_defconfig index 226f2e97c6e2..4f16716bfc32 100644 --- a/arch/arm/configs/mvebu_v5_defconfig +++ b/arch/arm/configs/mvebu_v5_defconfig @@ -4,7 +4,6 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=19 CONFIG_PROFILING=y -CONFIG_OPROFILE=y CONFIG_KPROBES=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index 3b6e7452609b..3148567b66b6 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -13,7 +13,6 @@ CONFIG_EXPERT=y # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLOB=y CONFIG_PROFILING=y -CONFIG_OPROFILE=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 1c11d1557779..f250bf1cc022 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -10,7 +10,6 @@ CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_CGROUPS=y CONFIG_MEMCG=y -CONFIG_MEMCG_SWAP=y CONFIG_BLK_CGROUP=y CONFIG_CGROUP_SCHED=y CONFIG_CFS_BANDWIDTH=y @@ -40,9 +39,6 @@ CONFIG_ARM_THUMBEE=y CONFIG_ARM_ERRATA_411920=y CONFIG_SMP=y CONFIG_NR_CPUS=2 -CONFIG_SECCOMP=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200" @@ -54,10 +50,8 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y CONFIG_CPUFREQ_DT=m # CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set -CONFIG_ARM_TI_CPUFREQ=y CONFIG_CPU_IDLE=y CONFIG_ARM_CPUIDLE=y -CONFIG_DT_IDLE_STATES=y CONFIG_KERNEL_MODE_NEON=y CONFIG_PM_DEBUG=y CONFIG_ARM_CRYPTO=y @@ -68,7 +62,6 @@ CONFIG_CRYPTO_AES_ARM=m CONFIG_CRYPTO_AES_ARM_BS=m CONFIG_CRYPTO_GHASH_ARM_CE=m CONFIG_CRYPTO_CHACHA20_NEON=m -CONFIG_OPROFILE=y CONFIG_KPROBES=y CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y @@ -158,9 +151,9 @@ CONFIG_MTD_ONENAND=y CONFIG_MTD_ONENAND_VERIFY_WRITE=y CONFIG_MTD_ONENAND_OMAP2=y CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_NAND_ECC_SW_BCH=y CONFIG_MTD_NAND_OMAP2=y CONFIG_MTD_NAND_OMAP_BCH=y +CONFIG_MTD_NAND_ECC_SW_BCH=y CONFIG_MTD_SPI_NOR=m CONFIG_MTD_UBI=y CONFIG_ZRAM=m @@ -202,11 +195,11 @@ CONFIG_TI_CPSW_SWITCHDEV=y CONFIG_TI_CPTS=y # CONFIG_NET_VENDOR_VIA is not set # CONFIG_NET_VENDOR_WIZNET is not set -CONFIG_DP83848_PHY=y -CONFIG_DP83867_PHY=y CONFIG_MICREL_PHY=y CONFIG_AT803X_PHY=y CONFIG_SMSC_PHY=y +CONFIG_DP83848_PHY=y +CONFIG_DP83867_PHY=y CONFIG_PPP=m CONFIG_PPP_BSDCOMP=m CONFIG_PPP_DEFLATE=m @@ -279,6 +272,7 @@ CONFIG_SERIAL_OMAP_CONSOLE=y CONFIG_SERIAL_DEV_BUS=y CONFIG_I2C_CHARDEV=y CONFIG_SPI=y +CONFIG_SPI_GPIO=m CONFIG_SPI_OMAP24XX=y CONFIG_SPI_TI_QSPI=m CONFIG_HSI=m @@ -296,7 +290,6 @@ CONFIG_GPIO_TWL4030=y CONFIG_W1=m CONFIG_HDQ_MASTER_OMAP=m CONFIG_W1_SLAVE_DS250X=m -CONFIG_POWER_AVS=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_GPIO=y CONFIG_BATTERY_BQ27XXX=m @@ -354,14 +347,8 @@ CONFIG_IR_RX51=m CONFIG_IR_GPIO_TX=m CONFIG_IR_PWM_TX=m CONFIG_MEDIA_SUPPORT=m -CONFIG_MEDIA_CAMERA_SUPPORT=y -CONFIG_MEDIA_CEC_SUPPORT=y -CONFIG_MEDIA_CONTROLLER=y -CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_VIDEO_OMAP3=m -CONFIG_CEC_PLATFORM_DRIVERS=y -# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set CONFIG_VIDEO_TVP5150=m CONFIG_VIDEO_MT9P031=m CONFIG_DRM=m @@ -369,8 +356,8 @@ CONFIG_DRM_OMAP=m CONFIG_OMAP5_DSS_HDMI=y CONFIG_OMAP2_DSS_SDI=y CONFIG_OMAP2_DSS_DSI=y -CONFIG_DRM_OMAP_PANEL_DSI_CM=m CONFIG_DRM_TILCDC=m +CONFIG_DRM_PANEL_DSI_CM=m CONFIG_DRM_PANEL_SIMPLE=m CONFIG_DRM_PANEL_LG_LB035Q02=m CONFIG_DRM_PANEL_NEC_NL8048HL11=m @@ -517,14 +504,14 @@ CONFIG_IIO=m CONFIG_IIO_SW_DEVICE=m CONFIG_IIO_SW_TRIGGER=m CONFIG_IIO_ST_ACCEL_3AXIS=m +CONFIG_KXCJK1013=m CONFIG_CPCAP_ADC=m CONFIG_INA2XX_ADC=m CONFIG_TI_AM335X_ADC=m CONFIG_TWL4030_MADC=m CONFIG_SENSORS_ISL29028=m -CONFIG_BMP280=m -CONFIG_KXCJK1013=m CONFIG_AK8975=m +CONFIG_BMP280=m CONFIG_PWM=y CONFIG_PWM_OMAP_DMTIMER=m CONFIG_PWM_TIECAP=m diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index 4bdbb036ac26..b9e3b647e732 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -5,7 +5,6 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_EXPERT=y # CONFIG_SLUB_DEBUG is not set CONFIG_PROFILING=y -CONFIG_OPROFILE=y CONFIG_KPROBES=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y diff --git a/arch/arm/configs/prima2_defconfig b/arch/arm/configs/prima2_defconfig deleted file mode 100644 index be19aa127595..000000000000 --- a/arch/arm/configs/prima2_defconfig +++ /dev/null @@ -1,72 +0,0 @@ -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_RELAY=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_ALL=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PARTITION_ADVANCED=y -CONFIG_BSD_DISKLABEL=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_ARCH_SIRF=y -CONFIG_SMP=y -CONFIG_SCHED_MC=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_KEXEC=y -CONFIG_BINFMT_MISC=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_INPUT_MISC=y -CONFIG_SERIAL_SIRFSOC=y -CONFIG_SERIAL_SIRFSOC_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_SIRF=y -CONFIG_SPI=y -CONFIG_SPI_SIRF=y -CONFIG_SPI_SPIDEV=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_USB_GADGET=y -CONFIG_USB_MASS_STORAGE=m -CONFIG_MMC=y -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_PLTFM=y -CONFIG_MMC_SDHCI_SIRF=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_SIRFSOC=y -CONFIG_DMADEVICES=y -CONFIG_DMADEVICES_DEBUG=y -CONFIG_DMADEVICES_VDEBUG=y -CONFIG_SIRF_DMA=y -CONFIG_HWSPINLOCK_SIRF=y -# CONFIG_IOMMU_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_CRAMFS=y -CONFIG_ROMFS_FS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_SECTION_MISMATCH=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_PREEMPT is not set -CONFIG_DEBUG_RT_MUTEXES=y -CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_MUTEXES=y -CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig index 8654ece13004..bd7dd81c9c54 100644 --- a/arch/arm/configs/pxa_defconfig +++ b/arch/arm/configs/pxa_defconfig @@ -13,7 +13,6 @@ CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y CONFIG_SLOB=y CONFIG_PROFILING=y -CONFIG_OPROFILE=m CONFIG_KPROBES=y CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index d6733e745b80..3f36887e8333 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -10,7 +10,6 @@ CONFIG_EMBEDDED=y # CONFIG_SLUB_DEBUG is not set # CONFIG_COMPAT_BRK is not set CONFIG_PROFILING=y -CONFIG_OPROFILE=y CONFIG_KPROBES=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y @@ -66,6 +65,8 @@ CONFIG_MTD_M25P80=y CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_QCOM=y CONFIG_MTD_SPI_NOR=y +CONFIG_MTD_QCOMSMEM_PARTS=y +CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_QCOM_COINCELL=y @@ -124,6 +125,7 @@ CONFIG_I2C_QUP=y CONFIG_SPI=y CONFIG_SPI_QUP=y CONFIG_SPMI=y +CONFIG_PINCTRL_MSM=y CONFIG_PINCTRL_APQ8064=y CONFIG_PINCTRL_APQ8084=y CONFIG_PINCTRL_IPQ4019=y @@ -132,6 +134,7 @@ CONFIG_PINCTRL_MSM8660=y CONFIG_PINCTRL_MSM8960=y CONFIG_PINCTRL_MDM9615=y CONFIG_PINCTRL_MSM8X74=y +CONFIG_PINCTRL_SDX55=y CONFIG_PINCTRL_QCOM_SPMI_PMIC=y CONFIG_PINCTRL_QCOM_SSBI_PMIC=y CONFIG_GPIOLIB=y @@ -150,6 +153,7 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_QCOM_RPM=y CONFIG_REGULATOR_QCOM_SMD_RPM=y CONFIG_REGULATOR_QCOM_SPMI=y +CONFIG_REGULATOR_QCOM_RPMH=y CONFIG_MEDIA_SUPPORT=y CONFIG_DRM=y CONFIG_DRM_MSM=m @@ -192,6 +196,7 @@ CONFIG_USB_CONFIGFS_ECM=y CONFIG_USB_CONFIGFS_F_FS=y CONFIG_USB_ULPI_BUS=y CONFIG_USB_ETH=m +CONFIG_USB_DWC3=y CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=32 CONFIG_MMC_ARMMMCI=y @@ -211,6 +216,7 @@ CONFIG_QCOM_BAM_DMA=y CONFIG_STAGING=y CONFIG_COMMON_CLK_QCOM=y CONFIG_QCOM_CLK_RPM=y +CONFIG_QCOM_CLK_RPMH=y CONFIG_QCOM_CLK_SMD_RPM=y CONFIG_APQ_MMCC_8084=y CONFIG_IPQ_GCC_4019=y @@ -220,7 +226,9 @@ CONFIG_MSM_LCC_8960=y CONFIG_MDM_LCC_9615=y CONFIG_MSM_MMCC_8960=y CONFIG_MSM_MMCC_8974=y +CONFIG_SDX_GCC_55=y CONFIG_MSM_IOMMU=y +CONFIG_ARM_SMMU=y CONFIG_HWSPINLOCK=y CONFIG_HWSPINLOCK_QCOM=y CONFIG_MAILBOX=y @@ -230,6 +238,7 @@ CONFIG_QCOM_Q6V5_PIL=y CONFIG_QCOM_WCNSS_PIL=y CONFIG_RPMSG_CHAR=y CONFIG_RPMSG_QCOM_SMD=y +CONFIG_QCOM_COMMAND_DB=y CONFIG_QCOM_GSBI=y CONFIG_QCOM_OCMEM=y CONFIG_QCOM_PM=y @@ -237,6 +246,8 @@ CONFIG_QCOM_SMEM=y CONFIG_QCOM_SMD_RPM=y CONFIG_QCOM_SMP2P=y CONFIG_QCOM_SMSM=y +CONFIG_QCOM_RPMH=y +CONFIG_QCOM_RPMHPD=y CONFIG_QCOM_WCNSS_CTRL=y CONFIG_EXTCON_QCOM_SPMI_MISC=y CONFIG_IIO=y @@ -256,6 +267,8 @@ CONFIG_PHY_QCOM_APQ8064_SATA=y CONFIG_PHY_QCOM_IPQ806X_SATA=y CONFIG_PHY_QCOM_USB_HS=y CONFIG_PHY_QCOM_USB_HSIC=y +CONFIG_PHY_QCOM_QMP=y +CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=y CONFIG_QCOM_QFPROM=y CONFIG_INTERCONNECT=y CONFIG_INTERCONNECT_QCOM=y @@ -267,6 +280,7 @@ CONFIG_FUSE_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y +CONFIG_UBIFS_FS=y CONFIG_NFS_FS=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y @@ -282,3 +296,6 @@ CONFIG_DYNAMIC_DEBUG=y CONFIG_DEBUG_INFO=y CONFIG_MAGIC_SYSRQ=y # CONFIG_SCHED_DEBUG is not set +CONFIG_WATCHDOG=y +CONFIG_QCOM_WDT=y +CONFIG_ARM_PSCI=y diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index 5f6297e6c549..f4c3c0652432 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -1,7 +1,6 @@ # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y -CONFIG_FHANDLE=y CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 @@ -19,11 +18,8 @@ CONFIG_SOC_SAMA5D2=y CONFIG_SOC_SAMA5D3=y CONFIG_SOC_SAMA5D4=y # CONFIG_ATMEL_CLOCKSOURCE_PIT is not set -CONFIG_AEABI=y CONFIG_UACCESS_WITH_MEMCPY=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ARM_APPENDED_DTB=y +# CONFIG_ATAGS is not set CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw" CONFIG_KEXEC=y CONFIG_VFP=y @@ -41,13 +37,7 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_DIAG is not set -# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET6_XFRM_MODE_TUNNEL is not set -# CONFIG_INET6_XFRM_MODE_BEET is not set CONFIG_IPV6_SIT_6RD=y CONFIG_BRIDGE=m CONFIG_BRIDGE_VLAN_FILTERING=y @@ -68,7 +58,6 @@ CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y -CONFIG_MTD_M25P80=y CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_ATMEL=y CONFIG_MTD_SPI_NOR=y @@ -78,7 +67,6 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=4 CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_TCLIB=y CONFIG_ATMEL_SSC=y CONFIG_EEPROM_AT24=y CONFIG_SCSI=y @@ -133,6 +121,7 @@ CONFIG_I2C_AT91=y CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y +CONFIG_SPI_ATMEL_QUADSPI=y CONFIG_SPI_GPIO=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_SAMA5D2_PIOBU=m diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig index e73c97b0f5b0..0c60eb382c80 100644 --- a/arch/arm/configs/socfpga_defconfig +++ b/arch/arm/configs/socfpga_defconfig @@ -18,7 +18,6 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_VFP=y CONFIG_NEON=y -CONFIG_OPROFILE=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index 8b2c14424927..f42c7a502b6e 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -5,7 +5,6 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y CONFIG_PROFILING=y -CONFIG_OPROFILE=m CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y diff --git a/arch/arm/configs/tango4_defconfig b/arch/arm/configs/tango4_defconfig deleted file mode 100644 index cbc9ade78f14..000000000000 --- a/arch/arm/configs/tango4_defconfig +++ /dev/null @@ -1,93 +0,0 @@ -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_NO_HZ_IDLE=y -CONFIG_HIGH_RES_TIMERS=y -# CONFIG_COMPAT_BRK is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_ARCH_TANGO=y -# CONFIG_ARM_ERRATA_643719 is not set -CONFIG_SMP=y -CONFIG_PREEMPT=y -CONFIG_HZ_300=y -CONFIG_AEABI=y -CONFIG_HIGHMEM=y -# CONFIG_ATAGS is not set -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ATAG_DTB_COMPAT=y -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPUFREQ_DT=y -CONFIG_VFP=y -CONFIG_NEON=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_IPV6 is not set -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_MTD=y -CONFIG_MTD_TESTS=m -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_NAND_TANGO=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_NETDEVICES=y -CONFIG_NET_VENDOR_AURORA=y -CONFIG_AURORA_NB8800=y -CONFIG_AT803X_PHY=y -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_RT288X=y -CONFIG_SERIAL_OF_PLATFORM=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_XLR=y -CONFIG_GPIOLIB=y -CONFIG_THERMAL=y -CONFIG_CPU_THERMAL=y -CONFIG_TANGO_THERMAL=y -CONFIG_WATCHDOG=y -CONFIG_TANGOX_WATCHDOG=y -CONFIG_FB=y -# CONFIG_HID is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_CHIPIDEA=y -CONFIG_USB_CHIPIDEA_HOST=y -CONFIG_MMC=y -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_PLTFM=y -CONFIG_MMC_SDHCI_OF_ARASAN=y -CONFIG_DMADEVICES=y -CONFIG_EXT4_FS=y -CONFIG_FUSE_FS=m -CONFIG_VFAT_FS=m -CONFIG_TMPFS=y -CONFIG_NFS_FS=y -# CONFIG_NFS_V2 is not set -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_UTF8=m -CONFIG_PRINTK_TIME=y -# CONFIG_CRYPTO_ECHAINIV is not set diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index 74739a52a8ad..13ef3e4dcbb7 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -167,6 +167,7 @@ CONFIG_SENSORS_LM95245=y CONFIG_THERMAL=y CONFIG_THERMAL_STATISTICS=y CONFIG_CPU_THERMAL=y +CONFIG_TEGRA_SOCTHERM=m CONFIG_WATCHDOG=y CONFIG_MAX77620_WATCHDOG=y CONFIG_TEGRA_WATCHDOG=y @@ -237,12 +238,13 @@ CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_TEGRA=y CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_TEGRA=y CONFIG_USB_ACM=y CONFIG_USB_WDM=y CONFIG_USB_STORAGE=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_UDC=y +CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_CHIPIDEA_TEGRA=y CONFIG_USB_GADGET=y CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=16 diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig deleted file mode 100644 index 543f07338100..000000000000 --- a/arch/arm/configs/u300_defconfig +++ /dev/null @@ -1,65 +0,0 @@ -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EXPERT=y -# CONFIG_AIO is not set -# CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ARCH_MULTI_V7 is not set -CONFIG_ARCH_U300=y -CONFIG_MACH_U300_SPIDUMMY=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072" -CONFIG_CPU_IDLE=y -# CONFIG_SUSPEND is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_NAND_FSMC=y -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_LEGACY_PTY_COUNT=16 -CONFIG_SERIAL_AMBA_PL011=y -CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_FB=y -# CONFIG_LCD_CLASS_DEVICE is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_USB_SUPPORT is not set -CONFIG_MMC=y -CONFIG_MMC_ARMMMCI=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_COH901331=y -CONFIG_DMADEVICES=y -CONFIG_COH901318=y -# CONFIG_DNOTIFY is not set -CONFIG_FUSE_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_FS=y -# CONFIG_SCHED_DEBUG is not set -CONFIG_TIMER_STATS=y -# CONFIG_DEBUG_PREEMPT is not set diff --git a/arch/arm/configs/vexpress_defconfig b/arch/arm/configs/vexpress_defconfig index c01baf7d6e37..4479369540f2 100644 --- a/arch/arm/configs/vexpress_defconfig +++ b/arch/arm/configs/vexpress_defconfig @@ -11,7 +11,6 @@ CONFIG_CPUSETS=y # CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_PROFILING=y -CONFIG_OPROFILE=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set diff --git a/arch/arm/configs/zx_defconfig b/arch/arm/configs/zx_defconfig deleted file mode 100644 index a046a492bfa7..000000000000 --- a/arch/arm/configs/zx_defconfig +++ /dev/null @@ -1,122 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_CGROUPS=y -CONFIG_CGROUP_DEBUG=y -CONFIG_CGROUP_FREEZER=y -CONFIG_CGROUP_CPUACCT=y -CONFIG_CGROUP_SCHED=y -CONFIG_RT_GROUP_SCHED=y -CONFIG_NAMESPACES=y -CONFIG_USER_NS=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_ALL=y -CONFIG_EMBEDDED=y -CONFIG_PERF_EVENTS=y -CONFIG_SLAB=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_ZX=y -CONFIG_SOC_ZX296702=y -# CONFIG_SWP_EMULATE is not set -CONFIG_ARM_ERRATA_754322=y -CONFIG_ARM_ERRATA_775420=y -CONFIG_SMP=y -CONFIG_VMSPLIT_2G=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_KSM=y -# CONFIG_IOMMU_SUPPORT is not set -CONFIG_VFP=y -CONFIG_NEON=y -CONFIG_KERNEL_MODE_NEON=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_HIBERNATION=y -CONFIG_PM_RUNTIME=y -CONFIG_PM_DEBUG=y -CONFIG_SUSPEND_TIME=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyAMA0,115200 debug earlyprintk root=/dev/ram rw rootwait" -#CONFIG_NET is not set -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_DMA_CMA=y -CONFIG_CMA_SIZE_MBYTES=192 -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=1 -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_UID_STAT=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_CHR_DEV_SCH=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_MD=y -CONFIG_BLK_DEV_DM=y -CONFIG_DM_CRYPT=y -CONFIG_DM_UEVENT=y -CONFIG_DM_VERITY=y -CONFIG_NETDEVICES=y -# CONFIG_INPUT_MOUSE is not set -CONFIG_SERIO=y -CONFIG_SERIO_LIBPS2=y -CONFIG_SPI=y -CONFIG_LOGO=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_CONSOLE_POLL=y -CONFIG_SERIAL_AMBA_PL011=y -CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -CONFIG_SERIAL_OF_PLATFORM=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_MMC=y -CONFIG_MMC_BLOCK_MINORS=16 -CONFIG_MMC_DW=y -CONFIG_EXT2_FS=y -CONFIG_EXT4_FS=y -CONFIG_EXT4_FS_POSIX_ACL=y -CONFIG_EXT4_FS_SECURITY=y -CONFIG_EXT4_DEBUG=y -CONFIG_FUSE_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=936 -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -#CONFIG_NFS_FS is not set -CONFIG_NLS_CODEPAGE_936=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_UTF8=y -CONFIG_PRINTK_TIME=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_INFO=y -CONFIG_FRAME_WARN=4096 -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_MEMORY_INIT=y -CONFIG_PANIC_TIMEOUT=5 -# CONFIG_SCHED_DEBUG is not set -CONFIG_SCHEDSTATS=y -CONFIG_TIMER_STATS=y -CONFIG_DEBUG_RT_MUTEXES=y -CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_MUTEXES=y -CONFIG_RCU_CPU_STALL_TIMEOUT=60 -# CONFIG_FTRACE is not set -CONFIG_KGDB=y -CONFIG_KGDB_KDB=y -# CONFIG_ARM_UNWIND is not set -CONFIG_DEBUG_PREEMPT=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -CONFIG_DYNAMIC_DEBUG=y -CONFIG_STACKTRACE=y -CONFIG_DEBUG_ZTE_ZX=y -CONFIG_EARLY_PRINTK=y -CONFIG_CRYPTO_LZO=y -CONFIG_GPIOLIB=y diff --git a/arch/arm/crypto/Kconfig b/arch/arm/crypto/Kconfig index c9bf2df85cb9..2b575792363e 100644 --- a/arch/arm/crypto/Kconfig +++ b/arch/arm/crypto/Kconfig @@ -62,6 +62,25 @@ config CRYPTO_SHA512_ARM SHA-512 secure hash standard (DFIPS 180-2) implemented using optimized ARM assembler and NEON, when available. +config CRYPTO_BLAKE2S_ARM + tristate "BLAKE2s digest algorithm (ARM)" + select CRYPTO_ARCH_HAVE_LIB_BLAKE2S + help + BLAKE2s digest algorithm optimized with ARM scalar instructions. This + is faster than the generic implementations of BLAKE2s and BLAKE2b, but + slower than the NEON implementation of BLAKE2b. (There is no NEON + implementation of BLAKE2s, since NEON doesn't really help with it.) + +config CRYPTO_BLAKE2B_NEON + tristate "BLAKE2b digest algorithm (ARM NEON)" + depends on KERNEL_MODE_NEON + select CRYPTO_BLAKE2B + help + BLAKE2b digest algorithm optimized with ARM NEON instructions. + On ARM processors that have NEON support but not the ARMv8 + Crypto Extensions, typically this BLAKE2b implementation is + much faster than SHA-2 and slightly faster than SHA-1. + config CRYPTO_AES_ARM tristate "Scalar AES cipher for ARM" select CRYPTO_ALGAPI diff --git a/arch/arm/crypto/Makefile b/arch/arm/crypto/Makefile index b745c17d356f..8f26c454ea12 100644 --- a/arch/arm/crypto/Makefile +++ b/arch/arm/crypto/Makefile @@ -9,6 +9,8 @@ obj-$(CONFIG_CRYPTO_SHA1_ARM) += sha1-arm.o obj-$(CONFIG_CRYPTO_SHA1_ARM_NEON) += sha1-arm-neon.o obj-$(CONFIG_CRYPTO_SHA256_ARM) += sha256-arm.o obj-$(CONFIG_CRYPTO_SHA512_ARM) += sha512-arm.o +obj-$(CONFIG_CRYPTO_BLAKE2S_ARM) += blake2s-arm.o +obj-$(CONFIG_CRYPTO_BLAKE2B_NEON) += blake2b-neon.o obj-$(CONFIG_CRYPTO_CHACHA20_NEON) += chacha-neon.o obj-$(CONFIG_CRYPTO_POLY1305_ARM) += poly1305-arm.o obj-$(CONFIG_CRYPTO_NHPOLY1305_NEON) += nhpoly1305-neon.o @@ -29,6 +31,8 @@ sha256-arm-neon-$(CONFIG_KERNEL_MODE_NEON) := sha256_neon_glue.o sha256-arm-y := sha256-core.o sha256_glue.o $(sha256-arm-neon-y) sha512-arm-neon-$(CONFIG_KERNEL_MODE_NEON) := sha512-neon-glue.o sha512-arm-y := sha512-core.o sha512-glue.o $(sha512-arm-neon-y) +blake2s-arm-y := blake2s-core.o blake2s-glue.o +blake2b-neon-y := blake2b-neon-core.o blake2b-neon-glue.o sha1-arm-ce-y := sha1-ce-core.o sha1-ce-glue.o sha2-arm-ce-y := sha2-ce-core.o sha2-ce-glue.o aes-arm-ce-y := aes-ce-core.o aes-ce-glue.o diff --git a/arch/arm/crypto/aes-neonbs-glue.c b/arch/arm/crypto/aes-neonbs-glue.c index f70af1d0514b..5c6cd3c63cbc 100644 --- a/arch/arm/crypto/aes-neonbs-glue.c +++ b/arch/arm/crypto/aes-neonbs-glue.c @@ -9,6 +9,7 @@ #include <asm/simd.h> #include <crypto/aes.h> #include <crypto/ctr.h> +#include <crypto/internal/cipher.h> #include <crypto/internal/simd.h> #include <crypto/internal/skcipher.h> #include <crypto/scatterwalk.h> @@ -23,6 +24,8 @@ MODULE_ALIAS_CRYPTO("cbc(aes)-all"); MODULE_ALIAS_CRYPTO("ctr(aes)"); MODULE_ALIAS_CRYPTO("xts(aes)"); +MODULE_IMPORT_NS(CRYPTO_INTERNAL); + asmlinkage void aesbs_convert_key(u8 out[], u32 const rk[], int rounds); asmlinkage void aesbs_ecb_encrypt(u8 out[], u8 const in[], u8 const rk[], diff --git a/arch/arm/crypto/blake2b-neon-core.S b/arch/arm/crypto/blake2b-neon-core.S new file mode 100644 index 000000000000..0406a186377f --- /dev/null +++ b/arch/arm/crypto/blake2b-neon-core.S @@ -0,0 +1,347 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * BLAKE2b digest algorithm, NEON accelerated + * + * Copyright 2020 Google LLC + * + * Author: Eric Biggers <ebiggers@google.com> + */ + +#include <linux/linkage.h> + + .text + .fpu neon + + // The arguments to blake2b_compress_neon() + STATE .req r0 + BLOCK .req r1 + NBLOCKS .req r2 + INC .req r3 + + // Pointers to the rotation tables + ROR24_TABLE .req r4 + ROR16_TABLE .req r5 + + // The original stack pointer + ORIG_SP .req r6 + + // NEON registers which contain the message words of the current block. + // M_0-M_3 are occasionally used for other purposes too. + M_0 .req d16 + M_1 .req d17 + M_2 .req d18 + M_3 .req d19 + M_4 .req d20 + M_5 .req d21 + M_6 .req d22 + M_7 .req d23 + M_8 .req d24 + M_9 .req d25 + M_10 .req d26 + M_11 .req d27 + M_12 .req d28 + M_13 .req d29 + M_14 .req d30 + M_15 .req d31 + + .align 4 + // Tables for computing ror64(x, 24) and ror64(x, 16) using the vtbl.8 + // instruction. This is the most efficient way to implement these + // rotation amounts with NEON. (On Cortex-A53 it's the same speed as + // vshr.u64 + vsli.u64, while on Cortex-A7 it's faster.) +.Lror24_table: + .byte 3, 4, 5, 6, 7, 0, 1, 2 +.Lror16_table: + .byte 2, 3, 4, 5, 6, 7, 0, 1 + // The BLAKE2b initialization vector +.Lblake2b_IV: + .quad 0x6a09e667f3bcc908, 0xbb67ae8584caa73b + .quad 0x3c6ef372fe94f82b, 0xa54ff53a5f1d36f1 + .quad 0x510e527fade682d1, 0x9b05688c2b3e6c1f + .quad 0x1f83d9abfb41bd6b, 0x5be0cd19137e2179 + +// Execute one round of BLAKE2b by updating the state matrix v[0..15] in the +// NEON registers q0-q7. The message block is in q8..q15 (M_0-M_15). The stack +// pointer points to a 32-byte aligned buffer containing a copy of q8 and q9 +// (M_0-M_3), so that they can be reloaded if they are used as temporary +// registers. The macro arguments s0-s15 give the order in which the message +// words are used in this round. 'final' is 1 if this is the final round. +.macro _blake2b_round s0, s1, s2, s3, s4, s5, s6, s7, \ + s8, s9, s10, s11, s12, s13, s14, s15, final=0 + + // Mix the columns: + // (v[0], v[4], v[8], v[12]), (v[1], v[5], v[9], v[13]), + // (v[2], v[6], v[10], v[14]), and (v[3], v[7], v[11], v[15]). + + // a += b + m[blake2b_sigma[r][2*i + 0]]; + vadd.u64 q0, q0, q2 + vadd.u64 q1, q1, q3 + vadd.u64 d0, d0, M_\s0 + vadd.u64 d1, d1, M_\s2 + vadd.u64 d2, d2, M_\s4 + vadd.u64 d3, d3, M_\s6 + + // d = ror64(d ^ a, 32); + veor q6, q6, q0 + veor q7, q7, q1 + vrev64.32 q6, q6 + vrev64.32 q7, q7 + + // c += d; + vadd.u64 q4, q4, q6 + vadd.u64 q5, q5, q7 + + // b = ror64(b ^ c, 24); + vld1.8 {M_0}, [ROR24_TABLE, :64] + veor q2, q2, q4 + veor q3, q3, q5 + vtbl.8 d4, {d4}, M_0 + vtbl.8 d5, {d5}, M_0 + vtbl.8 d6, {d6}, M_0 + vtbl.8 d7, {d7}, M_0 + + // a += b + m[blake2b_sigma[r][2*i + 1]]; + // + // M_0 got clobbered above, so we have to reload it if any of the four + // message words this step needs happens to be M_0. Otherwise we don't + // need to reload it here, as it will just get clobbered again below. +.if \s1 == 0 || \s3 == 0 || \s5 == 0 || \s7 == 0 + vld1.8 {M_0}, [sp, :64] +.endif + vadd.u64 q0, q0, q2 + vadd.u64 q1, q1, q3 + vadd.u64 d0, d0, M_\s1 + vadd.u64 d1, d1, M_\s3 + vadd.u64 d2, d2, M_\s5 + vadd.u64 d3, d3, M_\s7 + + // d = ror64(d ^ a, 16); + vld1.8 {M_0}, [ROR16_TABLE, :64] + veor q6, q6, q0 + veor q7, q7, q1 + vtbl.8 d12, {d12}, M_0 + vtbl.8 d13, {d13}, M_0 + vtbl.8 d14, {d14}, M_0 + vtbl.8 d15, {d15}, M_0 + + // c += d; + vadd.u64 q4, q4, q6 + vadd.u64 q5, q5, q7 + + // b = ror64(b ^ c, 63); + // + // This rotation amount isn't a multiple of 8, so it has to be + // implemented using a pair of shifts, which requires temporary + // registers. Use q8-q9 (M_0-M_3) for this, and reload them afterwards. + veor q8, q2, q4 + veor q9, q3, q5 + vshr.u64 q2, q8, #63 + vshr.u64 q3, q9, #63 + vsli.u64 q2, q8, #1 + vsli.u64 q3, q9, #1 + vld1.8 {q8-q9}, [sp, :256] + + // Mix the diagonals: + // (v[0], v[5], v[10], v[15]), (v[1], v[6], v[11], v[12]), + // (v[2], v[7], v[8], v[13]), and (v[3], v[4], v[9], v[14]). + // + // There are two possible ways to do this: use 'vext' instructions to + // shift the rows of the matrix so that the diagonals become columns, + // and undo it afterwards; or just use 64-bit operations on 'd' + // registers instead of 128-bit operations on 'q' registers. We use the + // latter approach, as it performs much better on Cortex-A7. + + // a += b + m[blake2b_sigma[r][2*i + 0]]; + vadd.u64 d0, d0, d5 + vadd.u64 d1, d1, d6 + vadd.u64 d2, d2, d7 + vadd.u64 d3, d3, d4 + vadd.u64 d0, d0, M_\s8 + vadd.u64 d1, d1, M_\s10 + vadd.u64 d2, d2, M_\s12 + vadd.u64 d3, d3, M_\s14 + + // d = ror64(d ^ a, 32); + veor d15, d15, d0 + veor d12, d12, d1 + veor d13, d13, d2 + veor d14, d14, d3 + vrev64.32 d15, d15 + vrev64.32 d12, d12 + vrev64.32 d13, d13 + vrev64.32 d14, d14 + + // c += d; + vadd.u64 d10, d10, d15 + vadd.u64 d11, d11, d12 + vadd.u64 d8, d8, d13 + vadd.u64 d9, d9, d14 + + // b = ror64(b ^ c, 24); + vld1.8 {M_0}, [ROR24_TABLE, :64] + veor d5, d5, d10 + veor d6, d6, d11 + veor d7, d7, d8 + veor d4, d4, d9 + vtbl.8 d5, {d5}, M_0 + vtbl.8 d6, {d6}, M_0 + vtbl.8 d7, {d7}, M_0 + vtbl.8 d4, {d4}, M_0 + + // a += b + m[blake2b_sigma[r][2*i + 1]]; +.if \s9 == 0 || \s11 == 0 || \s13 == 0 || \s15 == 0 + vld1.8 {M_0}, [sp, :64] +.endif + vadd.u64 d0, d0, d5 + vadd.u64 d1, d1, d6 + vadd.u64 d2, d2, d7 + vadd.u64 d3, d3, d4 + vadd.u64 d0, d0, M_\s9 + vadd.u64 d1, d1, M_\s11 + vadd.u64 d2, d2, M_\s13 + vadd.u64 d3, d3, M_\s15 + + // d = ror64(d ^ a, 16); + vld1.8 {M_0}, [ROR16_TABLE, :64] + veor d15, d15, d0 + veor d12, d12, d1 + veor d13, d13, d2 + veor d14, d14, d3 + vtbl.8 d12, {d12}, M_0 + vtbl.8 d13, {d13}, M_0 + vtbl.8 d14, {d14}, M_0 + vtbl.8 d15, {d15}, M_0 + + // c += d; + vadd.u64 d10, d10, d15 + vadd.u64 d11, d11, d12 + vadd.u64 d8, d8, d13 + vadd.u64 d9, d9, d14 + + // b = ror64(b ^ c, 63); + veor d16, d4, d9 + veor d17, d5, d10 + veor d18, d6, d11 + veor d19, d7, d8 + vshr.u64 q2, q8, #63 + vshr.u64 q3, q9, #63 + vsli.u64 q2, q8, #1 + vsli.u64 q3, q9, #1 + // Reloading q8-q9 can be skipped on the final round. +.if ! \final + vld1.8 {q8-q9}, [sp, :256] +.endif +.endm + +// +// void blake2b_compress_neon(struct blake2b_state *state, +// const u8 *block, size_t nblocks, u32 inc); +// +// Only the first three fields of struct blake2b_state are used: +// u64 h[8]; (inout) +// u64 t[2]; (inout) +// u64 f[2]; (in) +// + .align 5 +ENTRY(blake2b_compress_neon) + push {r4-r10} + + // Allocate a 32-byte stack buffer that is 32-byte aligned. + mov ORIG_SP, sp + sub ip, sp, #32 + bic ip, ip, #31 + mov sp, ip + + adr ROR24_TABLE, .Lror24_table + adr ROR16_TABLE, .Lror16_table + + mov ip, STATE + vld1.64 {q0-q1}, [ip]! // Load h[0..3] + vld1.64 {q2-q3}, [ip]! // Load h[4..7] +.Lnext_block: + adr r10, .Lblake2b_IV + vld1.64 {q14-q15}, [ip] // Load t[0..1] and f[0..1] + vld1.64 {q4-q5}, [r10]! // Load IV[0..3] + vmov r7, r8, d28 // Copy t[0] to (r7, r8) + vld1.64 {q6-q7}, [r10] // Load IV[4..7] + adds r7, r7, INC // Increment counter + bcs .Lslow_inc_ctr + vmov.i32 d28[0], r7 + vst1.64 {d28}, [ip] // Update t[0] +.Linc_ctr_done: + + // Load the next message block and finish initializing the state matrix + // 'v'. Fortunately, there are exactly enough NEON registers to fit the + // entire state matrix in q0-q7 and the entire message block in q8-15. + // + // However, _blake2b_round also needs some extra registers for rotates, + // so we have to spill some registers. It's better to spill the message + // registers than the state registers, as the message doesn't change. + // Therefore we store a copy of the first 32 bytes of the message block + // (q8-q9) in an aligned buffer on the stack so that they can be + // reloaded when needed. (We could just reload directly from the + // message buffer, but it's faster to use aligned loads.) + vld1.8 {q8-q9}, [BLOCK]! + veor q6, q6, q14 // v[12..13] = IV[4..5] ^ t[0..1] + vld1.8 {q10-q11}, [BLOCK]! + veor q7, q7, q15 // v[14..15] = IV[6..7] ^ f[0..1] + vld1.8 {q12-q13}, [BLOCK]! + vst1.8 {q8-q9}, [sp, :256] + mov ip, STATE + vld1.8 {q14-q15}, [BLOCK]! + + // Execute the rounds. Each round is provided the order in which it + // needs to use the message words. + _blake2b_round 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 + _blake2b_round 14, 10, 4, 8, 9, 15, 13, 6, 1, 12, 0, 2, 11, 7, 5, 3 + _blake2b_round 11, 8, 12, 0, 5, 2, 15, 13, 10, 14, 3, 6, 7, 1, 9, 4 + _blake2b_round 7, 9, 3, 1, 13, 12, 11, 14, 2, 6, 5, 10, 4, 0, 15, 8 + _blake2b_round 9, 0, 5, 7, 2, 4, 10, 15, 14, 1, 11, 12, 6, 8, 3, 13 + _blake2b_round 2, 12, 6, 10, 0, 11, 8, 3, 4, 13, 7, 5, 15, 14, 1, 9 + _blake2b_round 12, 5, 1, 15, 14, 13, 4, 10, 0, 7, 6, 3, 9, 2, 8, 11 + _blake2b_round 13, 11, 7, 14, 12, 1, 3, 9, 5, 0, 15, 4, 8, 6, 2, 10 + _blake2b_round 6, 15, 14, 9, 11, 3, 0, 8, 12, 2, 13, 7, 1, 4, 10, 5 + _blake2b_round 10, 2, 8, 4, 7, 6, 1, 5, 15, 11, 9, 14, 3, 12, 13, 0 + _blake2b_round 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 + _blake2b_round 14, 10, 4, 8, 9, 15, 13, 6, 1, 12, 0, 2, 11, 7, 5, 3 \ + final=1 + + // Fold the final state matrix into the hash chaining value: + // + // for (i = 0; i < 8; i++) + // h[i] ^= v[i] ^ v[i + 8]; + // + vld1.64 {q8-q9}, [ip]! // Load old h[0..3] + veor q0, q0, q4 // v[0..1] ^= v[8..9] + veor q1, q1, q5 // v[2..3] ^= v[10..11] + vld1.64 {q10-q11}, [ip] // Load old h[4..7] + veor q2, q2, q6 // v[4..5] ^= v[12..13] + veor q3, q3, q7 // v[6..7] ^= v[14..15] + veor q0, q0, q8 // v[0..1] ^= h[0..1] + veor q1, q1, q9 // v[2..3] ^= h[2..3] + mov ip, STATE + subs NBLOCKS, NBLOCKS, #1 // nblocks-- + vst1.64 {q0-q1}, [ip]! // Store new h[0..3] + veor q2, q2, q10 // v[4..5] ^= h[4..5] + veor q3, q3, q11 // v[6..7] ^= h[6..7] + vst1.64 {q2-q3}, [ip]! // Store new h[4..7] + + // Advance to the next block, if there is one. + bne .Lnext_block // nblocks != 0? + + mov sp, ORIG_SP + pop {r4-r10} + mov pc, lr + +.Lslow_inc_ctr: + // Handle the case where the counter overflowed its low 32 bits, by + // carrying the overflow bit into the full 128-bit counter. + vmov r9, r10, d29 + adcs r8, r8, #0 + adcs r9, r9, #0 + adc r10, r10, #0 + vmov d28, r7, r8 + vmov d29, r9, r10 + vst1.64 {q14}, [ip] // Update t[0] and t[1] + b .Linc_ctr_done +ENDPROC(blake2b_compress_neon) diff --git a/arch/arm/crypto/blake2b-neon-glue.c b/arch/arm/crypto/blake2b-neon-glue.c new file mode 100644 index 000000000000..34d73200e7fa --- /dev/null +++ b/arch/arm/crypto/blake2b-neon-glue.c @@ -0,0 +1,105 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * BLAKE2b digest algorithm, NEON accelerated + * + * Copyright 2020 Google LLC + */ + +#include <crypto/internal/blake2b.h> +#include <crypto/internal/hash.h> +#include <crypto/internal/simd.h> + +#include <linux/module.h> +#include <linux/sizes.h> + +#include <asm/neon.h> +#include <asm/simd.h> + +asmlinkage void blake2b_compress_neon(struct blake2b_state *state, + const u8 *block, size_t nblocks, u32 inc); + +static void blake2b_compress_arch(struct blake2b_state *state, + const u8 *block, size_t nblocks, u32 inc) +{ + if (!crypto_simd_usable()) { + blake2b_compress_generic(state, block, nblocks, inc); + return; + } + + do { + const size_t blocks = min_t(size_t, nblocks, + SZ_4K / BLAKE2B_BLOCK_SIZE); + + kernel_neon_begin(); + blake2b_compress_neon(state, block, blocks, inc); + kernel_neon_end(); + + nblocks -= blocks; + block += blocks * BLAKE2B_BLOCK_SIZE; + } while (nblocks); +} + +static int crypto_blake2b_update_neon(struct shash_desc *desc, + const u8 *in, unsigned int inlen) +{ + return crypto_blake2b_update(desc, in, inlen, blake2b_compress_arch); +} + +static int crypto_blake2b_final_neon(struct shash_desc *desc, u8 *out) +{ + return crypto_blake2b_final(desc, out, blake2b_compress_arch); +} + +#define BLAKE2B_ALG(name, driver_name, digest_size) \ + { \ + .base.cra_name = name, \ + .base.cra_driver_name = driver_name, \ + .base.cra_priority = 200, \ + .base.cra_flags = CRYPTO_ALG_OPTIONAL_KEY, \ + .base.cra_blocksize = BLAKE2B_BLOCK_SIZE, \ + .base.cra_ctxsize = sizeof(struct blake2b_tfm_ctx), \ + .base.cra_module = THIS_MODULE, \ + .digestsize = digest_size, \ + .setkey = crypto_blake2b_setkey, \ + .init = crypto_blake2b_init, \ + .update = crypto_blake2b_update_neon, \ + .final = crypto_blake2b_final_neon, \ + .descsize = sizeof(struct blake2b_state), \ + } + +static struct shash_alg blake2b_neon_algs[] = { + BLAKE2B_ALG("blake2b-160", "blake2b-160-neon", BLAKE2B_160_HASH_SIZE), + BLAKE2B_ALG("blake2b-256", "blake2b-256-neon", BLAKE2B_256_HASH_SIZE), + BLAKE2B_ALG("blake2b-384", "blake2b-384-neon", BLAKE2B_384_HASH_SIZE), + BLAKE2B_ALG("blake2b-512", "blake2b-512-neon", BLAKE2B_512_HASH_SIZE), +}; + +static int __init blake2b_neon_mod_init(void) +{ + if (!(elf_hwcap & HWCAP_NEON)) + return -ENODEV; + + return crypto_register_shashes(blake2b_neon_algs, + ARRAY_SIZE(blake2b_neon_algs)); +} + +static void __exit blake2b_neon_mod_exit(void) +{ + return crypto_unregister_shashes(blake2b_neon_algs, + ARRAY_SIZE(blake2b_neon_algs)); +} + +module_init(blake2b_neon_mod_init); +module_exit(blake2b_neon_mod_exit); + +MODULE_DESCRIPTION("BLAKE2b digest algorithm, NEON accelerated"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Eric Biggers <ebiggers@google.com>"); +MODULE_ALIAS_CRYPTO("blake2b-160"); +MODULE_ALIAS_CRYPTO("blake2b-160-neon"); +MODULE_ALIAS_CRYPTO("blake2b-256"); +MODULE_ALIAS_CRYPTO("blake2b-256-neon"); +MODULE_ALIAS_CRYPTO("blake2b-384"); +MODULE_ALIAS_CRYPTO("blake2b-384-neon"); +MODULE_ALIAS_CRYPTO("blake2b-512"); +MODULE_ALIAS_CRYPTO("blake2b-512-neon"); diff --git a/arch/arm/crypto/blake2s-core.S b/arch/arm/crypto/blake2s-core.S new file mode 100644 index 000000000000..bed897e9a181 --- /dev/null +++ b/arch/arm/crypto/blake2s-core.S @@ -0,0 +1,285 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * BLAKE2s digest algorithm, ARM scalar implementation + * + * Copyright 2020 Google LLC + * + * Author: Eric Biggers <ebiggers@google.com> + */ + +#include <linux/linkage.h> + + // Registers used to hold message words temporarily. There aren't + // enough ARM registers to hold the whole message block, so we have to + // load the words on-demand. + M_0 .req r12 + M_1 .req r14 + +// The BLAKE2s initialization vector +.Lblake2s_IV: + .word 0x6A09E667, 0xBB67AE85, 0x3C6EF372, 0xA54FF53A + .word 0x510E527F, 0x9B05688C, 0x1F83D9AB, 0x5BE0CD19 + +.macro __ldrd a, b, src, offset +#if __LINUX_ARM_ARCH__ >= 6 + ldrd \a, \b, [\src, #\offset] +#else + ldr \a, [\src, #\offset] + ldr \b, [\src, #\offset + 4] +#endif +.endm + +.macro __strd a, b, dst, offset +#if __LINUX_ARM_ARCH__ >= 6 + strd \a, \b, [\dst, #\offset] +#else + str \a, [\dst, #\offset] + str \b, [\dst, #\offset + 4] +#endif +.endm + +// Execute a quarter-round of BLAKE2s by mixing two columns or two diagonals. +// (a0, b0, c0, d0) and (a1, b1, c1, d1) give the registers containing the two +// columns/diagonals. s0-s1 are the word offsets to the message words the first +// column/diagonal needs, and likewise s2-s3 for the second column/diagonal. +// M_0 and M_1 are free to use, and the message block can be found at sp + 32. +// +// Note that to save instructions, the rotations don't happen when the +// pseudocode says they should, but rather they are delayed until the values are +// used. See the comment above _blake2s_round(). +.macro _blake2s_quarterround a0, b0, c0, d0, a1, b1, c1, d1, s0, s1, s2, s3 + + ldr M_0, [sp, #32 + 4 * \s0] + ldr M_1, [sp, #32 + 4 * \s2] + + // a += b + m[blake2s_sigma[r][2*i + 0]]; + add \a0, \a0, \b0, ror #brot + add \a1, \a1, \b1, ror #brot + add \a0, \a0, M_0 + add \a1, \a1, M_1 + + // d = ror32(d ^ a, 16); + eor \d0, \a0, \d0, ror #drot + eor \d1, \a1, \d1, ror #drot + + // c += d; + add \c0, \c0, \d0, ror #16 + add \c1, \c1, \d1, ror #16 + + // b = ror32(b ^ c, 12); + eor \b0, \c0, \b0, ror #brot + eor \b1, \c1, \b1, ror #brot + + ldr M_0, [sp, #32 + 4 * \s1] + ldr M_1, [sp, #32 + 4 * \s3] + + // a += b + m[blake2s_sigma[r][2*i + 1]]; + add \a0, \a0, \b0, ror #12 + add \a1, \a1, \b1, ror #12 + add \a0, \a0, M_0 + add \a1, \a1, M_1 + + // d = ror32(d ^ a, 8); + eor \d0, \a0, \d0, ror#16 + eor \d1, \a1, \d1, ror#16 + + // c += d; + add \c0, \c0, \d0, ror#8 + add \c1, \c1, \d1, ror#8 + + // b = ror32(b ^ c, 7); + eor \b0, \c0, \b0, ror#12 + eor \b1, \c1, \b1, ror#12 +.endm + +// Execute one round of BLAKE2s by updating the state matrix v[0..15]. v[0..9] +// are in r0..r9. The stack pointer points to 8 bytes of scratch space for +// spilling v[8..9], then to v[9..15], then to the message block. r10-r12 and +// r14 are free to use. The macro arguments s0-s15 give the order in which the +// message words are used in this round. +// +// All rotates are performed using the implicit rotate operand accepted by the +// 'add' and 'eor' instructions. This is faster than using explicit rotate +// instructions. To make this work, we allow the values in the second and last +// rows of the BLAKE2s state matrix (rows 'b' and 'd') to temporarily have the +// wrong rotation amount. The rotation amount is then fixed up just in time +// when the values are used. 'brot' is the number of bits the values in row 'b' +// need to be rotated right to arrive at the correct values, and 'drot' +// similarly for row 'd'. (brot, drot) start out as (0, 0) but we make it such +// that they end up as (7, 8) after every round. +.macro _blake2s_round s0, s1, s2, s3, s4, s5, s6, s7, \ + s8, s9, s10, s11, s12, s13, s14, s15 + + // Mix first two columns: + // (v[0], v[4], v[8], v[12]) and (v[1], v[5], v[9], v[13]). + __ldrd r10, r11, sp, 16 // load v[12] and v[13] + _blake2s_quarterround r0, r4, r8, r10, r1, r5, r9, r11, \ + \s0, \s1, \s2, \s3 + __strd r8, r9, sp, 0 + __strd r10, r11, sp, 16 + + // Mix second two columns: + // (v[2], v[6], v[10], v[14]) and (v[3], v[7], v[11], v[15]). + __ldrd r8, r9, sp, 8 // load v[10] and v[11] + __ldrd r10, r11, sp, 24 // load v[14] and v[15] + _blake2s_quarterround r2, r6, r8, r10, r3, r7, r9, r11, \ + \s4, \s5, \s6, \s7 + str r10, [sp, #24] // store v[14] + // v[10], v[11], and v[15] are used below, so no need to store them yet. + + .set brot, 7 + .set drot, 8 + + // Mix first two diagonals: + // (v[0], v[5], v[10], v[15]) and (v[1], v[6], v[11], v[12]). + ldr r10, [sp, #16] // load v[12] + _blake2s_quarterround r0, r5, r8, r11, r1, r6, r9, r10, \ + \s8, \s9, \s10, \s11 + __strd r8, r9, sp, 8 + str r11, [sp, #28] + str r10, [sp, #16] + + // Mix second two diagonals: + // (v[2], v[7], v[8], v[13]) and (v[3], v[4], v[9], v[14]). + __ldrd r8, r9, sp, 0 // load v[8] and v[9] + __ldrd r10, r11, sp, 20 // load v[13] and v[14] + _blake2s_quarterround r2, r7, r8, r10, r3, r4, r9, r11, \ + \s12, \s13, \s14, \s15 + __strd r10, r11, sp, 20 +.endm + +// +// void blake2s_compress_arch(struct blake2s_state *state, +// const u8 *block, size_t nblocks, u32 inc); +// +// Only the first three fields of struct blake2s_state are used: +// u32 h[8]; (inout) +// u32 t[2]; (inout) +// u32 f[2]; (in) +// + .align 5 +ENTRY(blake2s_compress_arch) + push {r0-r2,r4-r11,lr} // keep this an even number + +.Lnext_block: + // r0 is 'state' + // r1 is 'block' + // r3 is 'inc' + + // Load and increment the counter t[0..1]. + __ldrd r10, r11, r0, 32 + adds r10, r10, r3 + adc r11, r11, #0 + __strd r10, r11, r0, 32 + + // _blake2s_round is very short on registers, so copy the message block + // to the stack to save a register during the rounds. This also has the + // advantage that misalignment only needs to be dealt with in one place. + sub sp, sp, #64 + mov r12, sp + tst r1, #3 + bne .Lcopy_block_misaligned + ldmia r1!, {r2-r9} + stmia r12!, {r2-r9} + ldmia r1!, {r2-r9} + stmia r12, {r2-r9} +.Lcopy_block_done: + str r1, [sp, #68] // Update message pointer + + // Calculate v[8..15]. Push v[9..15] onto the stack, and leave space + // for spilling v[8..9]. Leave v[8..9] in r8-r9. + mov r14, r0 // r14 = state + adr r12, .Lblake2s_IV + ldmia r12!, {r8-r9} // load IV[0..1] + __ldrd r0, r1, r14, 40 // load f[0..1] + ldm r12, {r2-r7} // load IV[3..7] + eor r4, r4, r10 // v[12] = IV[4] ^ t[0] + eor r5, r5, r11 // v[13] = IV[5] ^ t[1] + eor r6, r6, r0 // v[14] = IV[6] ^ f[0] + eor r7, r7, r1 // v[15] = IV[7] ^ f[1] + push {r2-r7} // push v[9..15] + sub sp, sp, #8 // leave space for v[8..9] + + // Load h[0..7] == v[0..7]. + ldm r14, {r0-r7} + + // Execute the rounds. Each round is provided the order in which it + // needs to use the message words. + .set brot, 0 + .set drot, 0 + _blake2s_round 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 + _blake2s_round 14, 10, 4, 8, 9, 15, 13, 6, 1, 12, 0, 2, 11, 7, 5, 3 + _blake2s_round 11, 8, 12, 0, 5, 2, 15, 13, 10, 14, 3, 6, 7, 1, 9, 4 + _blake2s_round 7, 9, 3, 1, 13, 12, 11, 14, 2, 6, 5, 10, 4, 0, 15, 8 + _blake2s_round 9, 0, 5, 7, 2, 4, 10, 15, 14, 1, 11, 12, 6, 8, 3, 13 + _blake2s_round 2, 12, 6, 10, 0, 11, 8, 3, 4, 13, 7, 5, 15, 14, 1, 9 + _blake2s_round 12, 5, 1, 15, 14, 13, 4, 10, 0, 7, 6, 3, 9, 2, 8, 11 + _blake2s_round 13, 11, 7, 14, 12, 1, 3, 9, 5, 0, 15, 4, 8, 6, 2, 10 + _blake2s_round 6, 15, 14, 9, 11, 3, 0, 8, 12, 2, 13, 7, 1, 4, 10, 5 + _blake2s_round 10, 2, 8, 4, 7, 6, 1, 5, 15, 11, 9, 14, 3, 12, 13, 0 + + // Fold the final state matrix into the hash chaining value: + // + // for (i = 0; i < 8; i++) + // h[i] ^= v[i] ^ v[i + 8]; + // + ldr r14, [sp, #96] // r14 = &h[0] + add sp, sp, #8 // v[8..9] are already loaded. + pop {r10-r11} // load v[10..11] + eor r0, r0, r8 + eor r1, r1, r9 + eor r2, r2, r10 + eor r3, r3, r11 + ldm r14, {r8-r11} // load h[0..3] + eor r0, r0, r8 + eor r1, r1, r9 + eor r2, r2, r10 + eor r3, r3, r11 + stmia r14!, {r0-r3} // store new h[0..3] + ldm r14, {r0-r3} // load old h[4..7] + pop {r8-r11} // load v[12..15] + eor r0, r0, r4, ror #brot + eor r1, r1, r5, ror #brot + eor r2, r2, r6, ror #brot + eor r3, r3, r7, ror #brot + eor r0, r0, r8, ror #drot + eor r1, r1, r9, ror #drot + eor r2, r2, r10, ror #drot + eor r3, r3, r11, ror #drot + add sp, sp, #64 // skip copy of message block + stm r14, {r0-r3} // store new h[4..7] + + // Advance to the next block, if there is one. Note that if there are + // multiple blocks, then 'inc' (the counter increment amount) must be + // 64. So we can simply set it to 64 without re-loading it. + ldm sp, {r0, r1, r2} // load (state, block, nblocks) + mov r3, #64 // set 'inc' + subs r2, r2, #1 // nblocks-- + str r2, [sp, #8] + bne .Lnext_block // nblocks != 0? + + pop {r0-r2,r4-r11,pc} + + // The next message block (pointed to by r1) isn't 4-byte aligned, so it + // can't be loaded using ldmia. Copy it to the stack buffer (pointed to + // by r12) using an alternative method. r2-r9 are free to use. +.Lcopy_block_misaligned: + mov r2, #64 +1: +#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS + ldr r3, [r1], #4 +#else + ldrb r3, [r1, #0] + ldrb r4, [r1, #1] + ldrb r5, [r1, #2] + ldrb r6, [r1, #3] + add r1, r1, #4 + orr r3, r3, r4, lsl #8 + orr r3, r3, r5, lsl #16 + orr r3, r3, r6, lsl #24 +#endif + subs r2, r2, #4 + str r3, [r12], #4 + bne 1b + b .Lcopy_block_done +ENDPROC(blake2s_compress_arch) diff --git a/arch/arm/crypto/blake2s-glue.c b/arch/arm/crypto/blake2s-glue.c new file mode 100644 index 000000000000..f2cc1e5fc9ec --- /dev/null +++ b/arch/arm/crypto/blake2s-glue.c @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * BLAKE2s digest algorithm, ARM scalar implementation + * + * Copyright 2020 Google LLC + */ + +#include <crypto/internal/blake2s.h> +#include <crypto/internal/hash.h> + +#include <linux/module.h> + +/* defined in blake2s-core.S */ +EXPORT_SYMBOL(blake2s_compress_arch); + +static int crypto_blake2s_update_arm(struct shash_desc *desc, + const u8 *in, unsigned int inlen) +{ + return crypto_blake2s_update(desc, in, inlen, blake2s_compress_arch); +} + +static int crypto_blake2s_final_arm(struct shash_desc *desc, u8 *out) +{ + return crypto_blake2s_final(desc, out, blake2s_compress_arch); +} + +#define BLAKE2S_ALG(name, driver_name, digest_size) \ + { \ + .base.cra_name = name, \ + .base.cra_driver_name = driver_name, \ + .base.cra_priority = 200, \ + .base.cra_flags = CRYPTO_ALG_OPTIONAL_KEY, \ + .base.cra_blocksize = BLAKE2S_BLOCK_SIZE, \ + .base.cra_ctxsize = sizeof(struct blake2s_tfm_ctx), \ + .base.cra_module = THIS_MODULE, \ + .digestsize = digest_size, \ + .setkey = crypto_blake2s_setkey, \ + .init = crypto_blake2s_init, \ + .update = crypto_blake2s_update_arm, \ + .final = crypto_blake2s_final_arm, \ + .descsize = sizeof(struct blake2s_state), \ + } + +static struct shash_alg blake2s_arm_algs[] = { + BLAKE2S_ALG("blake2s-128", "blake2s-128-arm", BLAKE2S_128_HASH_SIZE), + BLAKE2S_ALG("blake2s-160", "blake2s-160-arm", BLAKE2S_160_HASH_SIZE), + BLAKE2S_ALG("blake2s-224", "blake2s-224-arm", BLAKE2S_224_HASH_SIZE), + BLAKE2S_ALG("blake2s-256", "blake2s-256-arm", BLAKE2S_256_HASH_SIZE), +}; + +static int __init blake2s_arm_mod_init(void) +{ + return IS_REACHABLE(CONFIG_CRYPTO_HASH) ? + crypto_register_shashes(blake2s_arm_algs, + ARRAY_SIZE(blake2s_arm_algs)) : 0; +} + +static void __exit blake2s_arm_mod_exit(void) +{ + if (IS_REACHABLE(CONFIG_CRYPTO_HASH)) + crypto_unregister_shashes(blake2s_arm_algs, + ARRAY_SIZE(blake2s_arm_algs)); +} + +module_init(blake2s_arm_mod_init); +module_exit(blake2s_arm_mod_exit); + +MODULE_DESCRIPTION("BLAKE2s digest algorithm, ARM scalar implementation"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Eric Biggers <ebiggers@google.com>"); +MODULE_ALIAS_CRYPTO("blake2s-128"); +MODULE_ALIAS_CRYPTO("blake2s-128-arm"); +MODULE_ALIAS_CRYPTO("blake2s-160"); +MODULE_ALIAS_CRYPTO("blake2s-160-arm"); +MODULE_ALIAS_CRYPTO("blake2s-224"); +MODULE_ALIAS_CRYPTO("blake2s-224-arm"); +MODULE_ALIAS_CRYPTO("blake2s-256"); +MODULE_ALIAS_CRYPTO("blake2s-256-arm"); diff --git a/arch/arm/crypto/chacha-glue.c b/arch/arm/crypto/chacha-glue.c index 7b5cf8430c6d..cdde8fd01f8f 100644 --- a/arch/arm/crypto/chacha-glue.c +++ b/arch/arm/crypto/chacha-glue.c @@ -60,6 +60,7 @@ static void chacha_doneon(u32 *state, u8 *dst, const u8 *src, chacha_block_xor_neon(state, d, s, nrounds); if (d != dst) memcpy(dst, buf, bytes); + state[12]++; } } diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index 4a0848aef207..03657ff8fbe3 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -2,7 +2,6 @@ generic-y += early_ioremap.h generic-y += extable.h generic-y += flat.h -generic-y += local64.h generic-y += parport.h generated-y += mach-types.h diff --git a/arch/arm/include/asm/archrandom.h b/arch/arm/include/asm/archrandom.h new file mode 100644 index 000000000000..a8e84ca5c2ee --- /dev/null +++ b/arch/arm/include/asm/archrandom.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_ARCHRANDOM_H +#define _ASM_ARCHRANDOM_H + +static inline bool __init smccc_probe_trng(void) +{ + return false; +} + +#endif /* _ASM_ARCHRANDOM_H */ diff --git a/arch/arm/include/asm/kexec-internal.h b/arch/arm/include/asm/kexec-internal.h new file mode 100644 index 000000000000..ecc2322db7aa --- /dev/null +++ b/arch/arm/include/asm/kexec-internal.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ARM_KEXEC_INTERNAL_H +#define _ARM_KEXEC_INTERNAL_H + +struct kexec_relocate_data { + unsigned long kexec_start_address; + unsigned long kexec_indirection_page; + unsigned long kexec_mach_type; + unsigned long kexec_r2; +}; + +#endif diff --git a/arch/arm/include/debug/brcmstb.S b/arch/arm/include/debug/brcmstb.S index 0ff32ffc610c..f684e3a815f6 100644 --- a/arch/arm/include/debug/brcmstb.S +++ b/arch/arm/include/debug/brcmstb.S @@ -25,6 +25,7 @@ #define SUN_TOP_CTRL_BASE_V7 REG_PHYS_ADDR_V7(0x404000) #define UARTA_3390 REG_PHYS_ADDR(0x40a900) +#define UARTA_72116 UARTA_7255 #define UARTA_7250 REG_PHYS_ADDR(0x40b400) #define UARTA_7255 REG_PHYS_ADDR(0x40c000) #define UARTA_7260 UARTA_7255 @@ -85,20 +86,21 @@ ARM_BE8( rev \rv, \rv ) /* Chip specific detection starts here */ 20: checkuart(\rp, \rv, 0x33900000, 3390) -21: checkuart(\rp, \rv, 0x72160000, 7216) -22: checkuart(\rp, \rv, 0x07216400, 72164) -23: checkuart(\rp, \rv, 0x07216500, 72165) -24: checkuart(\rp, \rv, 0x72500000, 7250) -25: checkuart(\rp, \rv, 0x72550000, 7255) -26: checkuart(\rp, \rv, 0x72600000, 7260) -27: checkuart(\rp, \rv, 0x72680000, 7268) -28: checkuart(\rp, \rv, 0x72710000, 7271) -29: checkuart(\rp, \rv, 0x72780000, 7278) -30: checkuart(\rp, \rv, 0x73640000, 7364) -31: checkuart(\rp, \rv, 0x73660000, 7366) -32: checkuart(\rp, \rv, 0x07437100, 74371) -33: checkuart(\rp, \rv, 0x74390000, 7439) -34: checkuart(\rp, \rv, 0x74450000, 7445) +21: checkuart(\rp, \rv, 0x07211600, 72116) +22: checkuart(\rp, \rv, 0x72160000, 7216) +23: checkuart(\rp, \rv, 0x07216400, 72164) +24: checkuart(\rp, \rv, 0x07216500, 72165) +25: checkuart(\rp, \rv, 0x72500000, 7250) +26: checkuart(\rp, \rv, 0x72550000, 7255) +27: checkuart(\rp, \rv, 0x72600000, 7260) +28: checkuart(\rp, \rv, 0x72680000, 7268) +29: checkuart(\rp, \rv, 0x72710000, 7271) +30: checkuart(\rp, \rv, 0x72780000, 7278) +31: checkuart(\rp, \rv, 0x73640000, 7364) +32: checkuart(\rp, \rv, 0x73660000, 7366) +33: checkuart(\rp, \rv, 0x07437100, 74371) +34: checkuart(\rp, \rv, 0x74390000, 7439) +35: checkuart(\rp, \rv, 0x74450000, 7445) /* No valid UART found */ 90: mov \rp, #0 diff --git a/arch/arm/include/debug/efm32.S b/arch/arm/include/debug/efm32.S deleted file mode 100644 index b0083d6e31e8..000000000000 --- a/arch/arm/include/debug/efm32.S +++ /dev/null @@ -1,45 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2013 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - */ - -#define UARTn_CMD 0x000c -#define UARTn_CMD_TXEN 0x0004 - -#define UARTn_STATUS 0x0010 -#define UARTn_STATUS_TXC 0x0020 -#define UARTn_STATUS_TXBL 0x0040 - -#define UARTn_TXDATA 0x0034 - - .macro addruart, rx, tmp, tmp2 - ldr \rx, =(CONFIG_DEBUG_UART_PHYS) - - /* - * enable TX. The driver might disable it to save energy. We - * don't care about disabling at the end as during debug power - * consumption isn't that important. - */ - ldr \tmp, =(UARTn_CMD_TXEN) - str \tmp, [\rx, #UARTn_CMD] - .endm - - .macro senduart,rd,rx - strb \rd, [\rx, #UARTn_TXDATA] - .endm - - .macro waituartcts,rd,rx - .endm - - .macro waituarttxrdy,rd,rx -1001: ldr \rd, [\rx, #UARTn_STATUS] - tst \rd, #UARTn_STATUS_TXBL - beq 1001b - .endm - - .macro busyuart,rd,rx -1001: ldr \rd, [\rx, UARTn_STATUS] - tst \rd, #UARTn_STATUS_TXC - bne 1001b - .endm diff --git a/arch/arm/include/debug/sirf.S b/arch/arm/include/debug/sirf.S deleted file mode 100644 index 3612c7b9cbe7..000000000000 --- a/arch/arm/include/debug/sirf.S +++ /dev/null @@ -1,40 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * arch/arm/mach-prima2/include/mach/debug-macro.S - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - */ - -#define SIRF_LLUART_TXFIFO_STATUS 0x0114 -#define SIRF_LLUART_TXFIFO_DATA 0x0118 - -#define SIRF_LLUART_TXFIFO_FULL (1 << 5) - -#ifdef CONFIG_DEBUG_SIRFATLAS7_UART0 -#define SIRF_LLUART_TXFIFO_EMPTY (1 << 8) -#else -#define SIRF_LLUART_TXFIFO_EMPTY (1 << 6) -#endif - - - .macro addruart, rp, rv, tmp - ldr \rp, =CONFIG_DEBUG_UART_PHYS @ physical - ldr \rv, =CONFIG_DEBUG_UART_VIRT @ virtual - .endm - - .macro senduart,rd,rx - str \rd, [\rx, #SIRF_LLUART_TXFIFO_DATA] - .endm - - .macro busyuart,rd,rx - .endm - - .macro waituartcts,rd,rx - .endm - - .macro waituarttxrdy,rd,rx -1001: ldr \rd, [\rx, #SIRF_LLUART_TXFIFO_STATUS] - tst \rd, #SIRF_LLUART_TXFIFO_EMPTY - beq 1001b - .endm - diff --git a/arch/arm/include/debug/tegra.S b/arch/arm/include/debug/tegra.S index 98daa7f48314..7454480d084b 100644 --- a/arch/arm/include/debug/tegra.S +++ b/arch/arm/include/debug/tegra.S @@ -149,7 +149,34 @@ .align 99: .word . +#if defined(ZIMAGE) + .word . + 4 +/* + * Storage for the state maintained by the macro. + * + * In the kernel proper, this data is located in arch/arm/mach-tegra/tegra.c. + * That's because this header is included from multiple files, and we only + * want a single copy of the data. In particular, the UART probing code above + * assumes it's running using physical addresses. This is true when this file + * is included from head.o, but not when included from debug.o. So we need + * to share the probe results between the two copies, rather than having + * to re-run the probing again later. + * + * In the decompressor, we put the storage right here, since common.c + * isn't included in the decompressor build. This storage data gets put in + * .text even though it's really data, since .data is discarded from the + * decompressor. Luckily, .text is writeable in the decompressor, unless + * CONFIG_ZBOOT_ROM. That dependency is handled in arch/arm/Kconfig.debug. + */ + /* Debug UART initialization required */ + .word 1 + /* Debug UART physical address */ + .word 0 + /* Debug UART virtual address */ + .word 0 +#else .word tegra_uart_config +#endif .ltorg /* Load previously selected UART address */ @@ -189,30 +216,3 @@ .macro waituarttxrdy,rd,rx .endm - -/* - * Storage for the state maintained by the macros above. - * - * In the kernel proper, this data is located in arch/arm/mach-tegra/tegra.c. - * That's because this header is included from multiple files, and we only - * want a single copy of the data. In particular, the UART probing code above - * assumes it's running using physical addresses. This is true when this file - * is included from head.o, but not when included from debug.o. So we need - * to share the probe results between the two copies, rather than having - * to re-run the probing again later. - * - * In the decompressor, we put the symbol/storage right here, since common.c - * isn't included in the decompressor build. This symbol gets put in .text - * even though it's really data, since .data is discarded from the - * decompressor. Luckily, .text is writeable in the decompressor, unless - * CONFIG_ZBOOT_ROM. That dependency is handled in arch/arm/Kconfig.debug. - */ -#if defined(ZIMAGE) -tegra_uart_config: - /* Debug UART initialization required */ - .word 1 - /* Debug UART physical address */ - .word 0 - /* Debug UART virtual address */ - .word 0 -#endif diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index a1570c8bab25..be8050b0c3df 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -12,6 +12,7 @@ #include <linux/mm.h> #include <linux/dma-mapping.h> #include <asm/cacheflush.h> +#include <asm/kexec-internal.h> #include <asm/glue-df.h> #include <asm/glue-pf.h> #include <asm/mach/arch.h> @@ -170,5 +171,9 @@ int main(void) DEFINE(MPU_RGN_PRBAR, offsetof(struct mpu_rgn, prbar)); DEFINE(MPU_RGN_PRLAR, offsetof(struct mpu_rgn, prlar)); #endif + DEFINE(KEXEC_START_ADDR, offsetof(struct kexec_relocate_data, kexec_start_address)); + DEFINE(KEXEC_INDIR_PAGE, offsetof(struct kexec_relocate_data, kexec_indirection_page)); + DEFINE(KEXEC_MACH_TYPE, offsetof(struct kexec_relocate_data, kexec_mach_type)); + DEFINE(KEXEC_R2, offsetof(struct kexec_relocate_data, kexec_r2)); return 0; } diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index 5d84ad333f05..2b09dad7935e 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -13,6 +13,7 @@ #include <linux/of_fdt.h> #include <asm/mmu_context.h> #include <asm/cacheflush.h> +#include <asm/kexec-internal.h> #include <asm/fncpy.h> #include <asm/mach-types.h> #include <asm/smp_plat.h> @@ -22,11 +23,6 @@ extern void relocate_new_kernel(void); extern const unsigned int relocate_new_kernel_size; -extern unsigned long kexec_start_address; -extern unsigned long kexec_indirection_page; -extern unsigned long kexec_mach_type; -extern unsigned long kexec_boot_atags; - static atomic_t waiting_for_crash_ipi; /* @@ -159,6 +155,7 @@ void (*kexec_reinit)(void); void machine_kexec(struct kimage *image) { unsigned long page_list, reboot_entry_phys; + struct kexec_relocate_data *data; void (*reboot_entry)(void); void *reboot_code_buffer; @@ -174,18 +171,17 @@ void machine_kexec(struct kimage *image) reboot_code_buffer = page_address(image->control_code_page); - /* Prepare parameters for reboot_code_buffer*/ - set_kernel_text_rw(); - kexec_start_address = image->start; - kexec_indirection_page = page_list; - kexec_mach_type = machine_arch_type; - kexec_boot_atags = image->arch.kernel_r2; - /* copy our kernel relocation code to the control code page */ reboot_entry = fncpy(reboot_code_buffer, &relocate_new_kernel, relocate_new_kernel_size); + data = reboot_code_buffer + relocate_new_kernel_size; + data->kexec_start_address = image->start; + data->kexec_indirection_page = page_list; + data->kexec_mach_type = machine_arch_type; + data->kexec_r2 = image->arch.kernel_r2; + /* get the identity mapping physical address for the reboot code */ reboot_entry_phys = virt_to_idmap(reboot_entry); diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S index 72a08786e16e..218d524360fc 100644 --- a/arch/arm/kernel/relocate_kernel.S +++ b/arch/arm/kernel/relocate_kernel.S @@ -5,14 +5,16 @@ #include <linux/linkage.h> #include <asm/assembler.h> +#include <asm/asm-offsets.h> #include <asm/kexec.h> .align 3 /* not needed for this code, but keeps fncpy() happy */ ENTRY(relocate_new_kernel) - ldr r0,kexec_indirection_page - ldr r1,kexec_start_address + adr r7, relocate_new_kernel_end + ldr r0, [r7, #KEXEC_INDIR_PAGE] + ldr r1, [r7, #KEXEC_START_ADDR] /* * If there is no indirection page (we are doing crashdumps) @@ -57,34 +59,16 @@ ENTRY(relocate_new_kernel) 2: /* Jump to relocated kernel */ - mov lr,r1 - mov r0,#0 - ldr r1,kexec_mach_type - ldr r2,kexec_boot_atags - ARM( ret lr ) - THUMB( bx lr ) - - .align - - .globl kexec_start_address -kexec_start_address: - .long 0x0 - - .globl kexec_indirection_page -kexec_indirection_page: - .long 0x0 - - .globl kexec_mach_type -kexec_mach_type: - .long 0x0 - - /* phy addr of the atags for the new kernel */ - .globl kexec_boot_atags -kexec_boot_atags: - .long 0x0 + mov lr, r1 + mov r0, #0 + ldr r1, [r7, #KEXEC_MACH_TYPE] + ldr r2, [r7, #KEXEC_R2] + ARM( ret lr ) + THUMB( bx lr ) ENDPROC(relocate_new_kernel) + .align 3 relocate_new_kernel_end: .globl relocate_new_kernel_size diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 9d2e916121be..a3a38d0a4c85 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -693,18 +693,20 @@ struct page *get_signal_page(void) addr = page_address(page); + /* Poison the entire page */ + memset32(addr, __opcode_to_mem_arm(0xe7fddef1), + PAGE_SIZE / sizeof(u32)); + /* Give the signal return code some randomness */ offset = 0x200 + (get_random_int() & 0x7fc); signal_return_offset = offset; - /* - * Copy signal return handlers into the vector page, and - * set sigreturn to be a pointer to these. - */ + /* Copy signal return handlers into the page */ memcpy(addr + offset, sigreturn_codes, sizeof(sigreturn_codes)); - ptr = (unsigned long)addr + offset; - flush_icache_range(ptr, ptr + sizeof(sigreturn_codes)); + /* Flush out all instructions in this page */ + ptr = (unsigned long)addr; + flush_icache_range(ptr, ptr + PAGE_SIZE); return page; } diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S index 0184de05c1be..b683c2caa40b 100644 --- a/arch/arm/mach-at91/pm_suspend.S +++ b/arch/arm/mach-at91/pm_suspend.S @@ -442,7 +442,7 @@ ENDPROC(at91_backup_mode) str tmp1, [pmc, #AT91_PMC_PLL_UPDT] /* step 2. */ - ldr tmp1, =#AT91_PMC_PLL_ACR_DEFAULT_PLLA + ldr tmp1, =AT91_PMC_PLL_ACR_DEFAULT_PLLA str tmp1, [pmc, #AT91_PMC_PLL_ACR] /* step 3. */ diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index 9b594ae98153..2890e61b2b46 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -161,6 +161,7 @@ config ARCH_BCM2835 select ARM_TIMER_SP804 select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7 select BCM2835_TIMER + select BRCMSTB_L2_IRQ select PINCTRL select PINCTRL_BCM2835 select MFD_CORE diff --git a/arch/arm/mach-efm32/Makefile b/arch/arm/mach-efm32/Makefile deleted file mode 100644 index dede3fa55a76..000000000000 --- a/arch/arm/mach-efm32/Makefile +++ /dev/null @@ -1,2 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -obj-y += dtmachine.o diff --git a/arch/arm/mach-efm32/Makefile.boot b/arch/arm/mach-efm32/Makefile.boot deleted file mode 100644 index cec195d4fcba..000000000000 --- a/arch/arm/mach-efm32/Makefile.boot +++ /dev/null @@ -1,4 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# Empty file waiting for deletion once Makefile.boot isn't needed any more. -# Patch waits for application at -# http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 . diff --git a/arch/arm/mach-efm32/dtmachine.c b/arch/arm/mach-efm32/dtmachine.c deleted file mode 100644 index e9364b843641..000000000000 --- a/arch/arm/mach-efm32/dtmachine.c +++ /dev/null @@ -1,16 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include <linux/kernel.h> - -#include <asm/v7m.h> - -#include <asm/mach/arch.h> - -static const char *const efm32gg_compat[] __initconst = { - "efm32,dk3750", - NULL -}; - -DT_MACHINE_START(EFM32DT, "EFM32 (Device Tree Support)") - .dt_compat = efm32gg_compat, - .restart = armv7m_restart, -MACHINE_END diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 56d272967fc0..5a48abac6af4 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -13,7 +13,6 @@ menuconfig ARCH_EXYNOS select ARM_GIC select EXYNOS_IRQ_COMBINER select COMMON_CLK_SAMSUNG - select EXYNOS_ASV select EXYNOS_CHIPID select EXYNOS_THERMAL select EXYNOS_PMU diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index 416462e3f5d6..f9713dc561cf 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -65,15 +65,15 @@ dc21285_read_config(struct pci_bus *bus, unsigned int devfn, int where, if (addr) switch (size) { case 1: - asm("ldrb %0, [%1, %2]" + asm volatile("ldrb %0, [%1, %2]" : "=r" (v) : "r" (addr), "r" (where) : "cc"); break; case 2: - asm("ldrh %0, [%1, %2]" + asm volatile("ldrh %0, [%1, %2]" : "=r" (v) : "r" (addr), "r" (where) : "cc"); break; case 4: - asm("ldr %0, [%1, %2]" + asm volatile("ldr %0, [%1, %2]" : "=r" (v) : "r" (addr), "r" (where) : "cc"); break; } @@ -99,17 +99,17 @@ dc21285_write_config(struct pci_bus *bus, unsigned int devfn, int where, if (addr) switch (size) { case 1: - asm("strb %0, [%1, %2]" + asm volatile("strb %0, [%1, %2]" : : "r" (value), "r" (addr), "r" (where) : "cc"); break; case 2: - asm("strh %0, [%1, %2]" + asm volatile("strh %0, [%1, %2]" : : "r" (value), "r" (addr), "r" (where) : "cc"); break; case 4: - asm("str %0, [%1, %2]" + asm volatile("str %0, [%1, %2]" : : "r" (value), "r" (addr), "r" (where) : "cc"); break; diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 2d76e2c6c99e..2b004cc4f95e 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -85,7 +85,6 @@ void imx_anatop_pre_suspend(void); void imx_anatop_post_resume(void); int imx6_set_lpm(enum mxc_cpu_pwr_mode mode); void imx6_set_int_mem_clk_lpm(bool enable); -void imx6sl_set_wait_clk(bool enter); int imx_mmdc_get_ddr_type(void); int imx7ulp_set_lpm(enum ulp_cpu_pwr_mode mode); diff --git a/arch/arm/mach-imx/cpuidle-imx6sl.c b/arch/arm/mach-imx/cpuidle-imx6sl.c index 4521e5352bf6..b86ffbeb28e4 100644 --- a/arch/arm/mach-imx/cpuidle-imx6sl.c +++ b/arch/arm/mach-imx/cpuidle-imx6sl.c @@ -3,6 +3,7 @@ * Copyright (C) 2014 Freescale Semiconductor, Inc. */ +#include <linux/clk/imx.h> #include <linux/cpuidle.h> #include <linux/module.h> #include <asm/cpuidle.h> diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h index 7acf7ce467ed..0760fff39a0b 100644 --- a/arch/arm/mach-imx/hardware.h +++ b/arch/arm/mach-imx/hardware.h @@ -106,8 +106,4 @@ .type = _type, \ } -/* There's an off-by-one between the gpio bank number and the gpiochip */ -/* range e.g. GPIO_1_5 is gpio 5 under linux */ -#define IMX_GPIO_NR(bank, nr) (((bank) - 1) * 32 + (nr)) - #endif /* __ASM_ARCH_MXC_HARDWARE_H__ */ diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c index e018e716735f..35e81201cb5d 100644 --- a/arch/arm/mach-imx/mach-imx6ul.c +++ b/arch/arm/mach-imx/mach-imx6ul.c @@ -14,6 +14,7 @@ #include "common.h" #include "cpuidle.h" +#include "hardware.h" static void __init imx6ul_enet_clk_init(void) { @@ -27,34 +28,16 @@ static void __init imx6ul_enet_clk_init(void) pr_err("failed to find fsl,imx6ul-iomux-gpr regmap\n"); } -static int ksz8081_phy_fixup(struct phy_device *dev) -{ - if (dev && dev->interface == PHY_INTERFACE_MODE_MII) { - phy_write(dev, 0x1f, 0x8110); - phy_write(dev, 0x16, 0x201); - } else if (dev && dev->interface == PHY_INTERFACE_MODE_RMII) { - phy_write(dev, 0x1f, 0x8190); - phy_write(dev, 0x16, 0x202); - } - - return 0; -} - -static void __init imx6ul_enet_phy_init(void) -{ - if (IS_BUILTIN(CONFIG_PHYLIB)) - phy_register_fixup_for_uid(PHY_ID_KSZ8081, MICREL_PHY_ID_MASK, - ksz8081_phy_fixup); -} - static inline void imx6ul_enet_init(void) { imx6ul_enet_clk_init(); - imx6ul_enet_phy_init(); } static void __init imx6ul_init_machine(void) { + imx_print_silicon_rev(cpu_is_imx6ull() ? "i.MX6ULL" : "i.MX6UL", + imx_get_soc_revision()); + of_platform_default_populate(NULL, NULL, NULL); imx6ul_enet_init(); imx_anatop_init(); diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c index 40c74b4c4d73..9244437cb1b9 100644 --- a/arch/arm/mach-imx/pm-imx6.c +++ b/arch/arm/mach-imx/pm-imx6.c @@ -4,6 +4,7 @@ * Copyright 2011 Linaro Ltd. */ +#include <linux/clk/imx.h> #include <linux/delay.h> #include <linux/init.h> #include <linux/io.h> diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S index 1eabf2d2834b..e06f946b75b9 100644 --- a/arch/arm/mach-imx/suspend-imx6.S +++ b/arch/arm/mach-imx/suspend-imx6.S @@ -67,6 +67,7 @@ #define MX6Q_CCM_CCR 0x0 .align 3 + .arm .macro sync_l2_cache diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index f7211b57b1e7..165c184801e1 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -13,7 +13,6 @@ config MACH_IXP4XX_OF select I2C select I2C_IOP3XX select PCI - select TIMER_OF select USE_OF help Say 'Y' here to support Device Tree-based IXP4xx platforms. diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index a720259099ed..0a4c9b0b13b0 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -203,6 +203,8 @@ static int osk_tps_setup(struct i2c_client *client, void *context) */ gpio_request(OSK_TPS_GPIO_USB_PWR_EN, "n_vbus_en"); gpio_direction_output(OSK_TPS_GPIO_USB_PWR_EN, 1); + /* Free the GPIO again as the driver will request it */ + gpio_free(OSK_TPS_GPIO_USB_PWR_EN); /* Set GPIO 2 high so LED D3 is off by default */ tps65010_set_gpio_out_value(GPIO2, HIGH); diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 4a59c169a113..4178c0ee46eb 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -17,11 +17,10 @@ config ARCH_OMAP3 bool "TI OMAP3" depends on ARCH_MULTI_V7 select ARCH_OMAP2PLUS - select ARM_CPU_SUSPEND if PM + select ARM_CPU_SUSPEND select OMAP_HWMOD select OMAP_INTERCONNECT - select PM_OPP if PM - select PM if CPU_IDLE + select PM_OPP select SOC_HAS_OMAP2_SDRC select ARM_ERRATA_430973 @@ -30,7 +29,7 @@ config ARCH_OMAP4 depends on ARCH_MULTI_V7 select ARCH_OMAP2PLUS select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP - select ARM_CPU_SUSPEND if PM + select ARM_CPU_SUSPEND select ARM_ERRATA_720789 select ARM_GIC select HAVE_ARM_SCU if SMP @@ -40,7 +39,7 @@ config ARCH_OMAP4 select OMAP_INTERCONNECT_BARRIER select PL310_ERRATA_588369 if CACHE_L2X0 select PL310_ERRATA_727915 if CACHE_L2X0 - select PM_OPP if PM + select PM_OPP select PM if CPU_IDLE select ARM_ERRATA_754322 select ARM_ERRATA_775420 @@ -50,7 +49,7 @@ config SOC_OMAP5 bool "TI OMAP5" depends on ARCH_MULTI_V7 select ARCH_OMAP2PLUS - select ARM_CPU_SUSPEND if PM + select ARM_CPU_SUSPEND select ARM_GIC select HAVE_ARM_SCU if SMP select HAVE_ARM_ARCH_TIMER @@ -58,14 +57,14 @@ config SOC_OMAP5 select OMAP_HWMOD select OMAP_INTERCONNECT select OMAP_INTERCONNECT_BARRIER - select PM_OPP if PM + select PM_OPP select ZONE_DMA if ARM_LPAE config SOC_AM33XX bool "TI AM33XX" depends on ARCH_MULTI_V7 select ARCH_OMAP2PLUS - select ARM_CPU_SUSPEND if PM + select ARM_CPU_SUSPEND config SOC_AM43XX bool "TI AM43x" @@ -79,13 +78,13 @@ config SOC_AM43XX select ARM_ERRATA_754322 select ARM_ERRATA_775420 select OMAP_INTERCONNECT - select ARM_CPU_SUSPEND if PM + select ARM_CPU_SUSPEND config SOC_DRA7XX bool "TI DRA7XX" depends on ARCH_MULTI_V7 select ARCH_OMAP2PLUS - select ARM_CPU_SUSPEND if PM + select ARM_CPU_SUSPEND select ARM_GIC select HAVE_ARM_SCU if SMP select HAVE_ARM_ARCH_TIMER @@ -94,7 +93,7 @@ config SOC_DRA7XX select OMAP_HWMOD select OMAP_INTERCONNECT select OMAP_INTERCONNECT_BARRIER - select PM_OPP if PM + select PM_OPP select ZONE_DMA if ARM_LPAE select PINCTRL_TI_IODELAY if OF && PINCTRL @@ -112,9 +111,11 @@ config ARCH_OMAP2PLUS select OMAP_DM_TIMER select OMAP_GPMC select PINCTRL - select PM_GENERIC_DOMAINS if PM - select PM_GENERIC_DOMAINS_OF if PM + select PM + select PM_GENERIC_DOMAINS + select PM_GENERIC_DOMAINS_OF select RESET_CONTROLLER + select SIMPLE_PM_BUS select SOC_BUS select TI_SYSC select OMAP_IRQCHIP @@ -140,7 +141,6 @@ config ARCH_OMAP2PLUS_TYPICAL select I2C_OMAP select MENELAUS if ARCH_OMAP2 select NEON if CPU_V7 - select PM select REGULATOR select REGULATOR_FIXED_VOLTAGE select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4 diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index dedd47e30b98..1feb0098705e 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -1299,7 +1299,7 @@ int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh) * Due to a suspend or hibernation operation, the state of the registers * controlling this clkdm will be lost, save their context. */ -static int _clkdm_save_context(struct clockdomain *clkdm, void *ununsed) +static int _clkdm_save_context(struct clockdomain *clkdm, void *unused) { if (!arch_clkdm || !arch_clkdm->clkdm_save_context) return -EINVAL; @@ -1312,7 +1312,7 @@ static int _clkdm_save_context(struct clockdomain *clkdm, void *ununsed) * * Restore the register values for this clockdomain. */ -static int _clkdm_restore_context(struct clockdomain *clkdm, void *ununsed) +static int _clkdm_restore_context(struct clockdomain *clkdm, void *unused) { if (!arch_clkdm || !arch_clkdm->clkdm_restore_context) return -EINVAL; diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index c8d317fafe2e..de37027ad758 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -151,10 +151,10 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev, (cx->mpu_logic_state == PWRDM_POWER_OFF); /* Enter broadcast mode for periodic timers */ - tick_broadcast_enable(); + RCU_NONIDLE(tick_broadcast_enable()); /* Enter broadcast mode for one-shot timers */ - tick_broadcast_enter(); + RCU_NONIDLE(tick_broadcast_enter()); /* * Call idle CPU PM enter notifier chain so that @@ -166,7 +166,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev, if (dev->cpu == 0) { pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state); - omap_set_pwrdm_state(mpu_pd, cx->mpu_state); + RCU_NONIDLE(omap_set_pwrdm_state(mpu_pd, cx->mpu_state)); /* * Call idle CPU cluster PM enter notifier chain @@ -178,7 +178,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev, index = 0; cx = state_ptr + index; pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state); - omap_set_pwrdm_state(mpu_pd, cx->mpu_state); + RCU_NONIDLE(omap_set_pwrdm_state(mpu_pd, cx->mpu_state)); mpuss_can_lose_context = 0; } } @@ -194,9 +194,9 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev, mpuss_can_lose_context) gic_dist_disable(); - clkdm_deny_idle(cpu_clkdm[1]); - omap_set_pwrdm_state(cpu_pd[1], PWRDM_POWER_ON); - clkdm_allow_idle(cpu_clkdm[1]); + RCU_NONIDLE(clkdm_deny_idle(cpu_clkdm[1])); + RCU_NONIDLE(omap_set_pwrdm_state(cpu_pd[1], PWRDM_POWER_ON)); + RCU_NONIDLE(clkdm_allow_idle(cpu_clkdm[1])); if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD) && mpuss_can_lose_context) { @@ -222,7 +222,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev, cpu_pm_exit(); cpu_pm_out: - tick_broadcast_exit(); + RCU_NONIDLE(tick_broadcast_exit()); fail: cpuidle_coupled_parallel_barrier(dev, &abort_barrier); diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index f3191704cab9..56d6814bec26 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -230,10 +230,12 @@ static int _omap_device_notifier_call(struct notifier_block *nb, break; case BUS_NOTIFY_BIND_DRIVER: od = to_omap_device(pdev); - if (od && (od->_state == OMAP_DEVICE_STATE_ENABLED) && - pm_runtime_status_suspended(dev)) { + if (od) { od->_driver_status = BUS_NOTIFY_BIND_DRIVER; - pm_runtime_set_active(dev); + if (od->_state == OMAP_DEVICE_STATE_ENABLED && + pm_runtime_status_suspended(dev)) { + pm_runtime_set_active(dev); + } } break; case BUS_NOTIFY_ADD_DEVICE: diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index cd38bf07c094..2e3a10914c40 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -522,6 +522,7 @@ static struct of_dev_auxdata omap_auxdata_lookup[] = { &dra7_ipu1_dsp_iommu_pdata), #endif /* Common auxdata */ + OF_DEV_AUXDATA("simple-pm-bus", 0, NULL, omap_auxdata_lookup), OF_DEV_AUXDATA("ti,sysc", 0, NULL, &ti_sysc_pdata), OF_DEV_AUXDATA("pinctrl-single", 0, NULL, &pcs_pdata), OF_DEV_AUXDATA("ti,omap-prm-inst", 0, NULL, &ti_prm_pdata), diff --git a/arch/arm/mach-omap2/pmic-cpcap.c b/arch/arm/mach-omap2/pmic-cpcap.c index eab281a5fc9f..09076ad0576d 100644 --- a/arch/arm/mach-omap2/pmic-cpcap.c +++ b/arch/arm/mach-omap2/pmic-cpcap.c @@ -71,7 +71,7 @@ static struct omap_voltdm_pmic omap_cpcap_iva = { .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, .vddmin = 900000, - .vddmax = 1350000, + .vddmax = 1375000, .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = 0x44, .volt_reg_addr = 0x0, diff --git a/arch/arm/mach-picoxcell/Kconfig b/arch/arm/mach-picoxcell/Kconfig deleted file mode 100644 index b8eba18c0265..000000000000 --- a/arch/arm/mach-picoxcell/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -config ARCH_PICOXCELL - bool "Picochip PicoXcell" - depends on ARCH_MULTI_V6 - select ARM_VIC - select DW_APB_TIMER_OF - select GPIOLIB - select HAVE_TCM - select NO_IOPORT_MAP diff --git a/arch/arm/mach-picoxcell/Makefile b/arch/arm/mach-picoxcell/Makefile deleted file mode 100644 index aef03938005c..000000000000 --- a/arch/arm/mach-picoxcell/Makefile +++ /dev/null @@ -1,2 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -obj-y := common.o diff --git a/arch/arm/mach-picoxcell/common.c b/arch/arm/mach-picoxcell/common.c deleted file mode 100644 index 8e738266a66a..000000000000 --- a/arch/arm/mach-picoxcell/common.c +++ /dev/null @@ -1,81 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2011 Picochip Ltd., Jamie Iles - * - * All enquiries to support@picochip.com - */ -#include <linux/delay.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/reboot.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#define PHYS_TO_IO(x) (((x) & 0x00ffffff) | 0xfe000000) -#define PICOXCELL_PERIPH_BASE 0x80000000 -#define PICOXCELL_PERIPH_LENGTH SZ_4M - -#define WDT_CTRL_REG_EN_MASK (1 << 0) -#define WDT_CTRL_REG_OFFS (0x00) -#define WDT_TIMEOUT_REG_OFFS (0x04) -static void __iomem *wdt_regs; - -/* - * The machine restart method can be called from an atomic context so we won't - * be able to ioremap the regs then. - */ -static void picoxcell_setup_restart(void) -{ - struct device_node *np = of_find_compatible_node(NULL, NULL, - "snps,dw-apb-wdg"); - if (WARN(!np, "unable to setup watchdog restart")) - return; - - wdt_regs = of_iomap(np, 0); - WARN(!wdt_regs, "failed to remap watchdog regs"); -} - -static struct map_desc io_map __initdata = { - .virtual = PHYS_TO_IO(PICOXCELL_PERIPH_BASE), - .pfn = __phys_to_pfn(PICOXCELL_PERIPH_BASE), - .length = PICOXCELL_PERIPH_LENGTH, - .type = MT_DEVICE, -}; - -static void __init picoxcell_map_io(void) -{ - iotable_init(&io_map, 1); -} - -static void __init picoxcell_init_machine(void) -{ - picoxcell_setup_restart(); -} - -static const char *picoxcell_dt_match[] = { - "picochip,pc3x2", - "picochip,pc3x3", - NULL -}; - -static void picoxcell_wdt_restart(enum reboot_mode mode, const char *cmd) -{ - /* - * Configure the watchdog to reset with the shortest possible timeout - * and give it chance to do the reset. - */ - if (wdt_regs) { - writel_relaxed(WDT_CTRL_REG_EN_MASK, wdt_regs + WDT_CTRL_REG_OFFS); - writel_relaxed(0, wdt_regs + WDT_TIMEOUT_REG_OFFS); - /* No sleeping, possibly atomic. */ - mdelay(500); - } -} - -DT_MACHINE_START(PICOXCELL, "Picochip picoXcell") - .map_io = picoxcell_map_io, - .init_machine = picoxcell_init_machine, - .dt_compat = picoxcell_dt_match, - .restart = picoxcell_wdt_restart, -MACHINE_END diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig deleted file mode 100644 index ea077f66372d..000000000000 --- a/arch/arm/mach-prima2/Kconfig +++ /dev/null @@ -1,48 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -menuconfig ARCH_SIRF - bool "CSR SiRF" - depends on ARCH_MULTI_V7 - select ARCH_HAS_RESET_CONTROLLER - select RESET_CONTROLLER - select GENERIC_IRQ_CHIP - select GPIOLIB - select NO_IOPORT_MAP - select REGMAP - select PINCTRL - select PINCTRL_SIRF - help - Support for CSR SiRFprimaII/Marco/Polo platforms - -if ARCH_SIRF - -comment "CSR SiRF atlas6/primaII/Atlas7 Specific Features" - -config ARCH_ATLAS6 - bool "CSR SiRFSoC ATLAS6 ARM Cortex A9 Platform" - default y - select SIRF_IRQ - help - Support for CSR SiRFSoC ARM Cortex A9 Platform - -config ARCH_ATLAS7 - bool "CSR SiRFSoC ATLAS7 ARM Cortex A7 Platform" - default y - select ARM_GIC - select ATLAS7_TIMER - select HAVE_ARM_SCU if SMP - help - Support for CSR SiRFSoC ARM Cortex A7 Platform - -config ARCH_PRIMA2 - bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform" - default y - select SIRF_IRQ - select ZONE_DMA - select PRIMA2_TIMER - help - Support for CSR SiRFSoC ARM Cortex A9 Platform - -config SIRF_IRQ - bool - -endif diff --git a/arch/arm/mach-prima2/Makefile b/arch/arm/mach-prima2/Makefile deleted file mode 100644 index 0fd2763031e9..000000000000 --- a/arch/arm/mach-prima2/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -obj-y += rstc.o -obj-y += common.o -obj-y += rtciobrg.o -obj-$(CONFIG_SUSPEND) += pm.o sleep.o -obj-$(CONFIG_SMP) += platsmp.o headsmp.o -obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o - -CFLAGS_hotplug.o += -march=armv7-a diff --git a/arch/arm/mach-prima2/common.c b/arch/arm/mach-prima2/common.c deleted file mode 100644 index e2d158e331e2..000000000000 --- a/arch/arm/mach-prima2/common.c +++ /dev/null @@ -1,64 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Defines machines for CSR SiRFprimaII - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/sizes.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <linux/of.h> -#include <linux/of_platform.h> -#include "common.h" - -static void __init __maybe_unused sirfsoc_init_late(void) -{ - sirfsoc_pm_init(); -} - -#ifdef CONFIG_ARCH_ATLAS6 -static const char *const atlas6_dt_match[] __initconst = { - "sirf,atlas6", - NULL -}; - -DT_MACHINE_START(ATLAS6_DT, "Generic ATLAS6 (Flattened Device Tree)") - /* Maintainer: Barry Song <baohua.song@csr.com> */ - .l2c_aux_val = 0, - .l2c_aux_mask = ~0, - .init_late = sirfsoc_init_late, - .dt_compat = atlas6_dt_match, -MACHINE_END -#endif - -#ifdef CONFIG_ARCH_PRIMA2 -static const char *const prima2_dt_match[] __initconst = { - "sirf,prima2", - NULL -}; - -DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)") - /* Maintainer: Barry Song <baohua.song@csr.com> */ - .l2c_aux_val = 0, - .l2c_aux_mask = ~0, - .dma_zone_size = SZ_256M, - .init_late = sirfsoc_init_late, - .dt_compat = prima2_dt_match, -MACHINE_END -#endif - -#ifdef CONFIG_ARCH_ATLAS7 -static const char *const atlas7_dt_match[] __initconst = { - "sirf,atlas7", - NULL -}; - -DT_MACHINE_START(ATLAS7_DT, "Generic ATLAS7 (Flattened Device Tree)") - /* Maintainer: Barry Song <baohua.song@csr.com> */ - .smp = smp_ops(sirfsoc_smp_ops), - .dt_compat = atlas7_dt_match, -MACHINE_END -#endif diff --git a/arch/arm/mach-prima2/common.h b/arch/arm/mach-prima2/common.h deleted file mode 100644 index 3bab7e571ded..000000000000 --- a/arch/arm/mach-prima2/common.h +++ /dev/null @@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * This file contains common function prototypes to avoid externs in the c files. - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - */ - -#ifndef __MACH_PRIMA2_COMMON_H__ -#define __MACH_PRIMA2_COMMON_H__ - -#include <linux/init.h> -#include <linux/reboot.h> - -#include <asm/mach/time.h> -#include <asm/exception.h> - -extern volatile int prima2_pen_release; - -extern const struct smp_operations sirfsoc_smp_ops; -extern void sirfsoc_secondary_startup(void); -extern void sirfsoc_cpu_die(unsigned int cpu); - -extern void __init sirfsoc_of_irq_init(void); -extern asmlinkage void __exception_irq_entry sirfsoc_handle_irq(struct pt_regs *regs); - -#ifdef CONFIG_SUSPEND -extern int sirfsoc_pm_init(void); -#else -static inline int sirfsoc_pm_init(void) { return 0; } -#endif - -#endif diff --git a/arch/arm/mach-prima2/headsmp.S b/arch/arm/mach-prima2/headsmp.S deleted file mode 100644 index 88ea1243942a..000000000000 --- a/arch/arm/mach-prima2/headsmp.S +++ /dev/null @@ -1,36 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Entry of the second core for CSR Marco dual-core SMP SoCs - * - * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. - */ - -#include <linux/linkage.h> -#include <linux/init.h> - -/* - * SIRFSOC specific entry point for secondary CPUs. This provides - * a "holding pen" into which all secondary cores are held until we're - * ready for them to initialise. - */ -ENTRY(sirfsoc_secondary_startup) - mrc p15, 0, r0, c0, c0, 5 - and r0, r0, #15 - adr r4, 1f - ldmia r4, {r5, r6} - sub r4, r4, r5 - add r6, r6, r4 -pen: ldr r7, [r6] - cmp r7, r0 - bne pen - - /* - * we've been released from the holding pen: secondary_stack - * should now contain the SVC stack for this core - */ - b secondary_startup -ENDPROC(sirfsoc_secondary_startup) - - .align -1: .long . - .long prima2_pen_release diff --git a/arch/arm/mach-prima2/hotplug.c b/arch/arm/mach-prima2/hotplug.c deleted file mode 100644 index bc0d957e89ac..000000000000 --- a/arch/arm/mach-prima2/hotplug.c +++ /dev/null @@ -1,38 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * CPU hotplug support for CSR Marco dual-core SMP SoCs - * - * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. - */ - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/smp.h> - -#include <asm/smp_plat.h> -#include "common.h" - -static inline void platform_do_lowpower(unsigned int cpu) -{ - /* we put the platform to just WFI */ - for (;;) { - __asm__ __volatile__("dsb\n\t" "wfi\n\t" - : : : "memory"); - if (prima2_pen_release == cpu_logical_map(cpu)) { - /* - * OK, proper wakeup, we're done - */ - break; - } - } -} - -/* - * platform-specific code to shutdown a CPU - * - * Called with IRQs disabled - */ -void sirfsoc_cpu_die(unsigned int cpu) -{ - platform_do_lowpower(cpu); -} diff --git a/arch/arm/mach-prima2/platsmp.c b/arch/arm/mach-prima2/platsmp.c deleted file mode 100644 index 8f7bbb57fb20..000000000000 --- a/arch/arm/mach-prima2/platsmp.c +++ /dev/null @@ -1,123 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * plat smp support for CSR Marco dual-core SMP SoCs - * - * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. - */ - -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/delay.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <asm/page.h> -#include <asm/mach/map.h> -#include <asm/smp_plat.h> -#include <asm/smp_scu.h> -#include <asm/cacheflush.h> -#include <asm/cputype.h> - -#include "common.h" - -static void __iomem *clk_base; - -static DEFINE_SPINLOCK(boot_lock); - -/* XXX prima2_pen_release is cargo culted code - DO NOT COPY XXX */ -volatile int prima2_pen_release = -1; - -static void sirfsoc_secondary_init(unsigned int cpu) -{ - /* - * let the primary processor know we're out of the - * pen, then head off into the C entry point - */ - prima2_pen_release = -1; - smp_wmb(); - - /* - * Synchronise with the boot thread. - */ - spin_lock(&boot_lock); - spin_unlock(&boot_lock); -} - -static const struct of_device_id clk_ids[] = { - { .compatible = "sirf,atlas7-clkc" }, - {}, -}; - -static int sirfsoc_boot_secondary(unsigned int cpu, struct task_struct *idle) -{ - unsigned long timeout; - struct device_node *np; - - np = of_find_matching_node(NULL, clk_ids); - if (!np) - return -ENODEV; - - clk_base = of_iomap(np, 0); - if (!clk_base) - return -ENOMEM; - - /* - * write the address of secondary startup into the clkc register - * at offset 0x2bC, then write the magic number 0x3CAF5D62 to the - * clkc register at offset 0x2b8, which is what boot rom code is - * waiting for. This would wake up the secondary core from WFE - */ -#define SIRFSOC_CPU1_JUMPADDR_OFFSET 0x2bc - __raw_writel(__pa_symbol(sirfsoc_secondary_startup), - clk_base + SIRFSOC_CPU1_JUMPADDR_OFFSET); - -#define SIRFSOC_CPU1_WAKEMAGIC_OFFSET 0x2b8 - __raw_writel(0x3CAF5D62, - clk_base + SIRFSOC_CPU1_WAKEMAGIC_OFFSET); - - /* make sure write buffer is drained */ - mb(); - - spin_lock(&boot_lock); - - /* - * The secondary processor is waiting to be released from - * the holding pen - release it, then wait for it to flag - * that it has been released by resetting prima2_pen_release. - * - * Note that "prima2_pen_release" is the hardware CPU ID, whereas - * "cpu" is Linux's internal ID. - */ - prima2_pen_release = cpu_logical_map(cpu); - sync_cache_w(&prima2_pen_release); - - /* - * Send the secondary CPU SEV, thereby causing the boot monitor to read - * the JUMPADDR and WAKEMAGIC, and branch to the address found there. - */ - dsb_sev(); - - timeout = jiffies + (1 * HZ); - while (time_before(jiffies, timeout)) { - smp_rmb(); - if (prima2_pen_release == -1) - break; - - udelay(10); - } - - /* - * now the secondary core is starting up let it run its - * calibrations, then wait for it to finish - */ - spin_unlock(&boot_lock); - - return prima2_pen_release != -1 ? -ENOSYS : 0; -} - -const struct smp_operations sirfsoc_smp_ops __initconst = { - .smp_secondary_init = sirfsoc_secondary_init, - .smp_boot_secondary = sirfsoc_boot_secondary, -#ifdef CONFIG_HOTPLUG_CPU - .cpu_die = sirfsoc_cpu_die, -#endif -}; diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c deleted file mode 100644 index c24bc89f320b..000000000000 --- a/arch/arm/mach-prima2/pm.c +++ /dev/null @@ -1,153 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * power management entry for CSR SiRFprimaII - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - */ - -#include <linux/kernel.h> -#include <linux/suspend.h> -#include <linux/slab.h> -#include <linux/export.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_device.h> -#include <linux/of_platform.h> -#include <linux/io.h> -#include <linux/rtc/sirfsoc_rtciobrg.h> -#include <asm/outercache.h> -#include <asm/suspend.h> -#include <asm/hardware/cache-l2x0.h> - -#include "pm.h" - -/* - * suspend asm codes will access these to make DRAM become self-refresh and - * system sleep - */ -u32 sirfsoc_pwrc_base; -void __iomem *sirfsoc_memc_base; - -static void sirfsoc_set_wakeup_source(void) -{ - u32 pwr_trigger_en_reg; - pwr_trigger_en_reg = sirfsoc_rtc_iobrg_readl(sirfsoc_pwrc_base + - SIRFSOC_PWRC_TRIGGER_EN); -#define X_ON_KEY_B (1 << 0) -#define RTC_ALARM0_B (1 << 2) -#define RTC_ALARM1_B (1 << 3) - sirfsoc_rtc_iobrg_writel(pwr_trigger_en_reg | X_ON_KEY_B | - RTC_ALARM0_B | RTC_ALARM1_B, - sirfsoc_pwrc_base + SIRFSOC_PWRC_TRIGGER_EN); -} - -static void sirfsoc_set_sleep_mode(u32 mode) -{ - u32 sleep_mode = sirfsoc_rtc_iobrg_readl(sirfsoc_pwrc_base + - SIRFSOC_PWRC_PDN_CTRL); - sleep_mode &= ~(SIRFSOC_SLEEP_MODE_MASK << 1); - sleep_mode |= mode << 1; - sirfsoc_rtc_iobrg_writel(sleep_mode, sirfsoc_pwrc_base + - SIRFSOC_PWRC_PDN_CTRL); -} - -static int sirfsoc_pre_suspend_power_off(void) -{ - u32 wakeup_entry = __pa_symbol(cpu_resume); - - sirfsoc_rtc_iobrg_writel(wakeup_entry, sirfsoc_pwrc_base + - SIRFSOC_PWRC_SCRATCH_PAD1); - - sirfsoc_set_wakeup_source(); - - sirfsoc_set_sleep_mode(SIRFSOC_DEEP_SLEEP_MODE); - - return 0; -} - -static int sirfsoc_pm_enter(suspend_state_t state) -{ - switch (state) { - case PM_SUSPEND_MEM: - sirfsoc_pre_suspend_power_off(); - - outer_disable(); - /* go zzz */ - cpu_suspend(0, sirfsoc_finish_suspend); - outer_resume(); - break; - default: - return -EINVAL; - } - return 0; -} - -static const struct platform_suspend_ops sirfsoc_pm_ops = { - .enter = sirfsoc_pm_enter, - .valid = suspend_valid_only_mem, -}; - -static const struct of_device_id pwrc_ids[] = { - { .compatible = "sirf,prima2-pwrc" }, - {} -}; - -static int __init sirfsoc_of_pwrc_init(void) -{ - struct device_node *np; - - np = of_find_matching_node(NULL, pwrc_ids); - if (!np) { - pr_err("unable to find compatible sirf pwrc node in dtb\n"); - return -ENOENT; - } - - /* - * pwrc behind rtciobrg is not located in memory space - * though the property is named reg. reg only means base - * offset for pwrc. then of_iomap is not suitable here. - */ - if (of_property_read_u32(np, "reg", &sirfsoc_pwrc_base)) - panic("unable to find base address of pwrc node in dtb\n"); - - of_node_put(np); - - return 0; -} - -static const struct of_device_id memc_ids[] = { - { .compatible = "sirf,prima2-memc" }, - {} -}; - -static int sirfsoc_memc_probe(struct platform_device *op) -{ - struct device_node *np = op->dev.of_node; - - sirfsoc_memc_base = of_iomap(np, 0); - if (!sirfsoc_memc_base) - panic("unable to map memc registers\n"); - - return 0; -} - -static struct platform_driver sirfsoc_memc_driver = { - .probe = sirfsoc_memc_probe, - .driver = { - .name = "sirfsoc-memc", - .of_match_table = memc_ids, - }, -}; - -static int __init sirfsoc_memc_init(void) -{ - return platform_driver_register(&sirfsoc_memc_driver); -} - -int __init sirfsoc_pm_init(void) -{ - sirfsoc_of_pwrc_init(); - sirfsoc_memc_init(); - suspend_set_ops(&sirfsoc_pm_ops); - return 0; -} diff --git a/arch/arm/mach-prima2/pm.h b/arch/arm/mach-prima2/pm.h deleted file mode 100644 index 0aff6cb876be..000000000000 --- a/arch/arm/mach-prima2/pm.h +++ /dev/null @@ -1,28 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * arch/arm/mach-prima2/pm.h - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - */ - -#ifndef _MACH_PRIMA2_PM_H_ -#define _MACH_PRIMA2_PM_H_ - -#define SIRFSOC_PWR_SLEEPFORCE 0x01 - -#define SIRFSOC_SLEEP_MODE_MASK 0x3 -#define SIRFSOC_DEEP_SLEEP_MODE 0x1 - -#define SIRFSOC_PWRC_PDN_CTRL 0x0 -#define SIRFSOC_PWRC_PON_OFF 0x4 -#define SIRFSOC_PWRC_TRIGGER_EN 0x8 -#define SIRFSOC_PWRC_PIN_STATUS 0x14 -#define SIRFSOC_PWRC_SCRATCH_PAD1 0x18 -#define SIRFSOC_PWRC_SCRATCH_PAD2 0x1C - -#ifndef __ASSEMBLY__ -extern int sirfsoc_finish_suspend(unsigned long); -#endif - -#endif - diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c deleted file mode 100644 index 9d56606ac87f..000000000000 --- a/arch/arm/mach-prima2/rstc.c +++ /dev/null @@ -1,107 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * reset controller for CSR SiRFprimaII - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - */ - -#include <linux/kernel.h> -#include <linux/mutex.h> -#include <linux/io.h> -#include <linux/delay.h> -#include <linux/device.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/platform_device.h> -#include <linux/reboot.h> -#include <linux/reset-controller.h> - -#include <asm/system_misc.h> - -#define SIRFSOC_RSTBIT_NUM 64 - -static void __iomem *sirfsoc_rstc_base; -static DEFINE_MUTEX(rstc_lock); - -static int sirfsoc_reset_module(struct reset_controller_dev *rcdev, - unsigned long sw_reset_idx) -{ - u32 reset_bit = sw_reset_idx; - - if (reset_bit >= SIRFSOC_RSTBIT_NUM) - return -EINVAL; - - mutex_lock(&rstc_lock); - - /* - * Writing 1 to this bit resets corresponding block. - * Writing 0 to this bit de-asserts reset signal of the - * corresponding block. datasheet doesn't require explicit - * delay between the set and clear of reset bit. it could - * be shorter if tests pass. - */ - writel(readl(sirfsoc_rstc_base + - (reset_bit / 32) * 4) | (1 << reset_bit), - sirfsoc_rstc_base + (reset_bit / 32) * 4); - msleep(20); - writel(readl(sirfsoc_rstc_base + - (reset_bit / 32) * 4) & ~(1 << reset_bit), - sirfsoc_rstc_base + (reset_bit / 32) * 4); - - mutex_unlock(&rstc_lock); - - return 0; -} - -static struct reset_control_ops sirfsoc_rstc_ops = { - .reset = sirfsoc_reset_module, -}; - -static struct reset_controller_dev sirfsoc_reset_controller = { - .ops = &sirfsoc_rstc_ops, - .nr_resets = SIRFSOC_RSTBIT_NUM, -}; - -#define SIRFSOC_SYS_RST_BIT BIT(31) - -static void sirfsoc_restart(enum reboot_mode mode, const char *cmd) -{ - writel(SIRFSOC_SYS_RST_BIT, sirfsoc_rstc_base); -} - -static int sirfsoc_rstc_probe(struct platform_device *pdev) -{ - struct device_node *np = pdev->dev.of_node; - sirfsoc_rstc_base = of_iomap(np, 0); - if (!sirfsoc_rstc_base) { - dev_err(&pdev->dev, "unable to map rstc cpu registers\n"); - return -ENOMEM; - } - - sirfsoc_reset_controller.of_node = np; - arm_pm_restart = sirfsoc_restart; - - if (IS_ENABLED(CONFIG_RESET_CONTROLLER)) - reset_controller_register(&sirfsoc_reset_controller); - - return 0; -} - -static const struct of_device_id rstc_ids[] = { - { .compatible = "sirf,prima2-rstc" }, - {}, -}; - -static struct platform_driver sirfsoc_rstc_driver = { - .probe = sirfsoc_rstc_probe, - .driver = { - .name = "sirfsoc_rstc", - .of_match_table = rstc_ids, - }, -}; - -static int __init sirfsoc_rstc_init(void) -{ - return platform_driver_register(&sirfsoc_rstc_driver); -} -subsys_initcall(sirfsoc_rstc_init); diff --git a/arch/arm/mach-prima2/rtciobrg.c b/arch/arm/mach-prima2/rtciobrg.c deleted file mode 100644 index 97c0e333e3b9..000000000000 --- a/arch/arm/mach-prima2/rtciobrg.c +++ /dev/null @@ -1,179 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * RTC I/O Bridge interfaces for CSR SiRFprimaII/atlas7 - * ARM access the registers of SYSRTC, GPSRTC and PWRC through this module - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/io.h> -#include <linux/regmap.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_device.h> -#include <linux/of_platform.h> - -#define SIRFSOC_CPUIOBRG_CTRL 0x00 -#define SIRFSOC_CPUIOBRG_WRBE 0x04 -#define SIRFSOC_CPUIOBRG_ADDR 0x08 -#define SIRFSOC_CPUIOBRG_DATA 0x0c - -/* - * suspend asm codes will access this address to make system deepsleep - * after DRAM becomes self-refresh - */ -void __iomem *sirfsoc_rtciobrg_base; -static DEFINE_SPINLOCK(rtciobrg_lock); - -/* - * symbols without lock are only used by suspend asm codes - * and these symbols are not exported too - */ -void sirfsoc_rtc_iobrg_wait_sync(void) -{ - while (readl_relaxed(sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_CTRL)) - cpu_relax(); -} - -void sirfsoc_rtc_iobrg_besyncing(void) -{ - unsigned long flags; - - spin_lock_irqsave(&rtciobrg_lock, flags); - - sirfsoc_rtc_iobrg_wait_sync(); - - spin_unlock_irqrestore(&rtciobrg_lock, flags); -} -EXPORT_SYMBOL_GPL(sirfsoc_rtc_iobrg_besyncing); - -u32 __sirfsoc_rtc_iobrg_readl(u32 addr) -{ - sirfsoc_rtc_iobrg_wait_sync(); - - writel_relaxed(0x00, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_WRBE); - writel_relaxed(addr, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_ADDR); - writel_relaxed(0x01, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_CTRL); - - sirfsoc_rtc_iobrg_wait_sync(); - - return readl_relaxed(sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_DATA); -} - -u32 sirfsoc_rtc_iobrg_readl(u32 addr) -{ - unsigned long flags, val; - - /* TODO: add hwspinlock to sync with M3 */ - spin_lock_irqsave(&rtciobrg_lock, flags); - - val = __sirfsoc_rtc_iobrg_readl(addr); - - spin_unlock_irqrestore(&rtciobrg_lock, flags); - - return val; -} -EXPORT_SYMBOL_GPL(sirfsoc_rtc_iobrg_readl); - -void sirfsoc_rtc_iobrg_pre_writel(u32 val, u32 addr) -{ - sirfsoc_rtc_iobrg_wait_sync(); - - writel_relaxed(0xf1, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_WRBE); - writel_relaxed(addr, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_ADDR); - - writel_relaxed(val, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_DATA); -} - -void sirfsoc_rtc_iobrg_writel(u32 val, u32 addr) -{ - unsigned long flags; - - /* TODO: add hwspinlock to sync with M3 */ - spin_lock_irqsave(&rtciobrg_lock, flags); - - sirfsoc_rtc_iobrg_pre_writel(val, addr); - - writel_relaxed(0x01, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_CTRL); - - sirfsoc_rtc_iobrg_wait_sync(); - - spin_unlock_irqrestore(&rtciobrg_lock, flags); -} -EXPORT_SYMBOL_GPL(sirfsoc_rtc_iobrg_writel); - - -static int regmap_iobg_regwrite(void *context, unsigned int reg, - unsigned int val) -{ - sirfsoc_rtc_iobrg_writel(val, reg); - return 0; -} - -static int regmap_iobg_regread(void *context, unsigned int reg, - unsigned int *val) -{ - *val = (u32)sirfsoc_rtc_iobrg_readl(reg); - return 0; -} - -static struct regmap_bus regmap_iobg = { - .reg_write = regmap_iobg_regwrite, - .reg_read = regmap_iobg_regread, -}; - -/** - * devm_regmap_init_iobg(): Initialise managed register map - * - * @iobg: Device that will be interacted with - * @config: Configuration for register map - * - * The return value will be an ERR_PTR() on error or a valid pointer - * to a struct regmap. The regmap will be automatically freed by the - * device management code. - */ -struct regmap *devm_regmap_init_iobg(struct device *dev, - const struct regmap_config *config) -{ - const struct regmap_bus *bus = ®map_iobg; - - return devm_regmap_init(dev, bus, dev, config); -} -EXPORT_SYMBOL_GPL(devm_regmap_init_iobg); - -static const struct of_device_id rtciobrg_ids[] = { - { .compatible = "sirf,prima2-rtciobg" }, - {} -}; - -static int sirfsoc_rtciobrg_probe(struct platform_device *op) -{ - struct device_node *np = op->dev.of_node; - - sirfsoc_rtciobrg_base = of_iomap(np, 0); - if (!sirfsoc_rtciobrg_base) - panic("unable to map rtc iobrg registers\n"); - - return 0; -} - -static struct platform_driver sirfsoc_rtciobrg_driver = { - .probe = sirfsoc_rtciobrg_probe, - .driver = { - .name = "sirfsoc-rtciobrg", - .of_match_table = rtciobrg_ids, - }, -}; - -static int __init sirfsoc_rtciobrg_init(void) -{ - return platform_driver_register(&sirfsoc_rtciobrg_driver); -} -postcore_initcall(sirfsoc_rtciobrg_init); - -MODULE_AUTHOR("Zhiwu Song <zhiwu.song@csr.com>"); -MODULE_AUTHOR("Barry Song <baohua.song@csr.com>"); -MODULE_DESCRIPTION("CSR SiRFprimaII rtc io bridge"); -MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/mach-prima2/sleep.S b/arch/arm/mach-prima2/sleep.S deleted file mode 100644 index d9bbc5ca39ef..000000000000 --- a/arch/arm/mach-prima2/sleep.S +++ /dev/null @@ -1,63 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * sleep mode for CSR SiRFprimaII - * - * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. - */ - -#include <linux/linkage.h> -#include <asm/ptrace.h> -#include <asm/assembler.h> - -#include "pm.h" - -#define DENALI_CTL_22_OFF 0x58 -#define DENALI_CTL_112_OFF 0x1c0 - - .text - -ENTRY(sirfsoc_finish_suspend) - @ r5: mem controller - ldr r0, =sirfsoc_memc_base - ldr r5, [r0] - @ r6: pwrc base offset - ldr r0, =sirfsoc_pwrc_base - ldr r6, [r0] - @ r7: rtc iobrg controller - ldr r0, =sirfsoc_rtciobrg_base - ldr r7, [r0] - - @ Read the power control register and set the - @ sleep force bit. - add r0, r6, #SIRFSOC_PWRC_PDN_CTRL - bl __sirfsoc_rtc_iobrg_readl - orr r0,r0,#SIRFSOC_PWR_SLEEPFORCE - add r1, r6, #SIRFSOC_PWRC_PDN_CTRL - bl sirfsoc_rtc_iobrg_pre_writel - mov r1, #0x1 - - @ read the MEM ctl register and set the self - @ refresh bit - - ldr r2, [r5, #DENALI_CTL_22_OFF] - orr r2, r2, #0x1 - - @ Following code has to run from cache since - @ the RAM is going to self refresh mode - .align 5 - str r2, [r5, #DENALI_CTL_22_OFF] - -1: - ldr r4, [r5, #DENALI_CTL_112_OFF] - tst r4, #0x1 - bne 1b - - @ write SLEEPFORCE through rtc iobridge - - str r1, [r7] - @ wait rtc io bridge sync -1: - ldr r3, [r7] - tst r3, #0x01 - bne 1b - b . diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 524d6093e0c7..09b8495f3fd9 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -4,6 +4,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/clkdev.h> +#include <linux/clk-provider.h> #include <linux/dma-mapping.h> #include <linux/dmaengine.h> #include <linux/spi/pxa2xx_spi.h> @@ -634,6 +635,13 @@ static struct platform_device pxa27x_device_camera = { void __init pxa_set_camera_info(struct pxacamera_platform_data *info) { + struct clk *mclk; + + /* Register a fixed-rate clock for camera sensors. */ + mclk = clk_register_fixed_rate(NULL, "pxa_camera_clk", NULL, 0, + info->mclk_10khz * 10000); + if (!IS_ERR(mclk)) + clkdev_create(mclk, "mclk", NULL); pxa_register_device(&pxa27x_device_camera, info); } diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index d3af80317f2d..a79f296e81e0 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -577,7 +577,6 @@ static struct platform_device power_dev = { static struct wm97xx_batt_pdata mioa701_battery_data = { .batt_aux = WM97XX_AUX_ID1, .temp_aux = -1, - .charge_gpio = -1, .min_voltage = 0xc00, .max_voltage = 0xfc0, .batt_tech = POWER_SUPPLY_TECHNOLOGY_LION, diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c index 0d246a1aebbc..6230381a7ca0 100644 --- a/arch/arm/mach-pxa/palm27x.c +++ b/arch/arm/mach-pxa/palm27x.c @@ -212,7 +212,6 @@ void __init palm27x_irda_init(int pwdn) static struct wm97xx_batt_pdata palm27x_batt_pdata = { .batt_aux = WM97XX_AUX_ID3, .temp_aux = WM97XX_AUX_ID2, - .charge_gpio = -1, .batt_mult = 1000, .batt_div = 414, .temp_mult = 1, diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index e3bcf58b4e63..a2b10db4aacc 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -273,7 +273,6 @@ static struct platform_device power_supply = { static struct wm97xx_batt_pdata palmte2_batt_pdata = { .batt_aux = WM97XX_AUX_ID3, .temp_aux = WM97XX_AUX_ID2, - .charge_gpio = -1, .max_voltage = PALMTE2_BAT_MAX_VOLTAGE, .min_voltage = PALMTE2_BAT_MIN_VOLTAGE, .batt_mult = 1000, diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index 21fd76bb09cd..8e74fbb0a96e 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -20,7 +20,6 @@ #include <linux/spi/spi.h> #include <linux/spi/pxa2xx_spi.h> #include <linux/spi/libertas_spi.h> -#include <linux/spi/lms283gf05.h> #include <linux/power_supply.h> #include <linux/mtd/physmap.h> #include <linux/gpio.h> @@ -488,7 +487,6 @@ static struct z2_battery_info batt_chip_info = { .batt_I2C_bus = 0, .batt_I2C_addr = 0x55, .batt_I2C_reg = 2, - .charge_gpio = GPIO0_ZIPITZ2_AC_DETECT, .min_voltage = 3475000, .max_voltage = 4190000, .batt_div = 59, @@ -497,9 +495,19 @@ static struct z2_battery_info batt_chip_info = { .batt_name = "Z2", }; +static struct gpiod_lookup_table z2_battery_gpio_table = { + .dev_id = "aer915", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO0_ZIPITZ2_AC_DETECT, + NULL, GPIO_ACTIVE_HIGH), + { }, + }, +}; + static struct i2c_board_info __initdata z2_i2c_board_info[] = { { I2C_BOARD_INFO("aer915", 0x55), + .dev_name = "aer915", .platform_data = &batt_chip_info, }, { I2C_BOARD_INFO("wm8750", 0x1b), @@ -510,6 +518,7 @@ static struct i2c_board_info __initdata z2_i2c_board_info[] = { static void __init z2_i2c_init(void) { pxa_set_i2c_info(NULL); + gpiod_add_lookup_table(&z2_battery_gpio_table); i2c_register_board_info(0, ARRAY_AND_SIZE(z2_i2c_board_info)); } #else @@ -578,8 +587,13 @@ static struct pxa2xx_spi_chip lms283_chip_info = { .gpio_cs = GPIO88_ZIPITZ2_LCD_CS, }; -static const struct lms283gf05_pdata lms283_pdata = { - .reset_gpio = GPIO19_ZIPITZ2_LCD_RESET, +static struct gpiod_lookup_table lms283_gpio_table = { + .dev_id = "spi2.0", /* SPI bus 2 chip select 0 */ + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO19_ZIPITZ2_LCD_RESET, + "reset", GPIO_ACTIVE_LOW), + { }, + }, }; static struct spi_board_info spi_board_info[] __initdata = { @@ -595,7 +609,6 @@ static struct spi_board_info spi_board_info[] __initdata = { { .modalias = "lms283gf05", .controller_data = &lms283_chip_info, - .platform_data = &lms283_pdata, .max_speed_hz = 400000, .bus_num = 2, .chip_select = 0, @@ -615,6 +628,7 @@ static void __init z2_spi_init(void) { pxa2xx_set_spi_info(1, &pxa_ssp1_master_info); pxa2xx_set_spi_info(2, &pxa_ssp2_master_info); + gpiod_add_lookup_table(&lms283_gpio_table); spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); } #else diff --git a/arch/arm/mach-s3c/irq-s3c24xx-fiq.S b/arch/arm/mach-s3c/irq-s3c24xx-fiq.S index b54cbd012241..5d238d9a798e 100644 --- a/arch/arm/mach-s3c/irq-s3c24xx-fiq.S +++ b/arch/arm/mach-s3c/irq-s3c24xx-fiq.S @@ -35,7 +35,6 @@ @ and an offset to the irq acknowledgment word ENTRY(s3c24xx_spi_fiq_rx) -s3c24xx_spi_fix_rx: .word fiq_rx_end - fiq_rx_start .word fiq_rx_irq_ack - fiq_rx_start fiq_rx_start: @@ -49,7 +48,7 @@ fiq_rx_start: strb fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ] subs fiq_rcount, fiq_rcount, #1 - subnes pc, lr, #4 @@ return, still have work to do + subsne pc, lr, #4 @@ return, still have work to do @@ set IRQ controller so that next op will trigger IRQ mov fiq_rtmp, #0 @@ -61,7 +60,6 @@ fiq_rx_irq_ack: fiq_rx_end: ENTRY(s3c24xx_spi_fiq_txrx) -s3c24xx_spi_fiq_txrx: .word fiq_txrx_end - fiq_txrx_start .word fiq_txrx_irq_ack - fiq_txrx_start fiq_txrx_start: @@ -76,7 +74,7 @@ fiq_txrx_start: strb fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ] subs fiq_rcount, fiq_rcount, #1 - subnes pc, lr, #4 @@ return, still have work to do + subsne pc, lr, #4 @@ return, still have work to do mov fiq_rtmp, #0 str fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD - S3C24XX_VA_IRQ ] @@ -88,7 +86,6 @@ fiq_txrx_irq_ack: fiq_txrx_end: ENTRY(s3c24xx_spi_fiq_tx) -s3c24xx_spi_fix_tx: .word fiq_tx_end - fiq_tx_start .word fiq_tx_irq_ack - fiq_tx_start fiq_tx_start: @@ -101,7 +98,7 @@ fiq_tx_start: strb fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ] subs fiq_rcount, fiq_rcount, #1 - subnes pc, lr, #4 @@ return, still have work to do + subsne pc, lr, #4 @@ return, still have work to do mov fiq_rtmp, #0 str fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD - S3C24XX_VA_IRQ ] diff --git a/arch/arm/mach-s3c/irq-s3c24xx.c b/arch/arm/mach-s3c/irq-s3c24xx.c index 79b5f19af7a5..0c631c14a817 100644 --- a/arch/arm/mach-s3c/irq-s3c24xx.c +++ b/arch/arm/mach-s3c/irq-s3c24xx.c @@ -21,6 +21,7 @@ #include <linux/of.h> #include <linux/of_irq.h> #include <linux/of_address.h> +#include <linux/spi/s3c24xx.h> #include <asm/exception.h> #include <asm/mach/irq.h> @@ -32,6 +33,7 @@ #include "cpu.h" #include "regs-irqtype.h" #include "pm.h" +#include "s3c24xx.h" #define S3C_IRQTYPE_NONE 0 #define S3C_IRQTYPE_EINT 1 @@ -357,7 +359,7 @@ static inline int s3c24xx_handle_intc(struct s3c_irq_intc *intc, return true; } -asmlinkage void __exception_irq_entry s3c24xx_handle_irq(struct pt_regs *regs) +static asmlinkage void __exception_irq_entry s3c24xx_handle_irq(struct pt_regs *regs) { do { if (likely(s3c_intc[0])) @@ -1305,7 +1307,7 @@ static struct s3c24xx_irq_of_ctrl s3c2410_ctrl[] = { } }; -int __init s3c2410_init_intc_of(struct device_node *np, +static int __init s3c2410_init_intc_of(struct device_node *np, struct device_node *interrupt_parent) { return s3c_init_intc_of(np, interrupt_parent, @@ -1327,7 +1329,7 @@ static struct s3c24xx_irq_of_ctrl s3c2416_ctrl[] = { } }; -int __init s3c2416_init_intc_of(struct device_node *np, +static int __init s3c2416_init_intc_of(struct device_node *np, struct device_node *interrupt_parent) { return s3c_init_intc_of(np, interrupt_parent, diff --git a/arch/arm/mach-spear/generic.h b/arch/arm/mach-spear/generic.h index 25b4c5e66e39..8ec2b92dca19 100644 --- a/arch/arm/mach-spear/generic.h +++ b/arch/arm/mach-spear/generic.h @@ -43,16 +43,4 @@ void spear13xx_cpu_die(unsigned int cpu); extern const struct smp_operations spear13xx_smp_ops; -#ifdef CONFIG_MACH_SPEAR1310 -void __init spear1310_clk_init(void __iomem *misc_base, void __iomem *ras_base); -#else -static inline void spear1310_clk_init(void __iomem *misc_base, void __iomem *ras_base) {} -#endif - -#ifdef CONFIG_MACH_SPEAR1340 -void __init spear1340_clk_init(void __iomem *misc_base); -#else -static inline void spear1340_clk_init(void __iomem *misc_base) {} -#endif - #endif /* __MACH_GENERIC_H */ diff --git a/arch/arm/mach-spear/spear13xx.c b/arch/arm/mach-spear/spear13xx.c index 31c43cabf362..74d1ca2a529a 100644 --- a/arch/arm/mach-spear/spear13xx.c +++ b/arch/arm/mach-spear/spear13xx.c @@ -15,6 +15,7 @@ #include <linux/amba/pl022.h> #include <linux/clk.h> +#include <linux/clk/spear.h> #include <linux/clocksource.h> #include <linux/err.h> #include <linux/of.h> diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index eeadb1a4dcfe..e5c2fce281cd 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -6,6 +6,8 @@ menuconfig ARCH_SUNXI select CLKSRC_MMIO select GENERIC_IRQ_CHIP select GPIOLIB + select IRQ_DOMAIN_HIERARCHY + select IRQ_FASTEOI_HIERARCHY_HANDLERS select PINCTRL select PM_OPP select SUN4I_TIMER diff --git a/arch/arm/mach-tango/Kconfig b/arch/arm/mach-tango/Kconfig deleted file mode 100644 index a9eeda36aeb1..000000000000 --- a/arch/arm/mach-tango/Kconfig +++ /dev/null @@ -1,13 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -config ARCH_TANGO - bool "Sigma Designs Tango4 (SMP87xx)" - depends on ARCH_MULTI_V7 - # Cortex-A9 MPCore r3p0, PL310 r3p2 - select ARM_ERRATA_754322 - select ARM_ERRATA_764369 if SMP - select ARM_ERRATA_775420 - select ARM_GIC - select CLKSRC_TANGO_XTAL - select HAVE_ARM_SCU - select HAVE_ARM_TWD - select TANGO_IRQ diff --git a/arch/arm/mach-tango/Makefile b/arch/arm/mach-tango/Makefile deleted file mode 100644 index 97cd04508fa1..000000000000 --- a/arch/arm/mach-tango/Makefile +++ /dev/null @@ -1,4 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -obj-y += setup.o smc.o -obj-$(CONFIG_SMP) += platsmp.o -obj-$(CONFIG_SUSPEND) += pm.o diff --git a/arch/arm/mach-tango/platsmp.c b/arch/arm/mach-tango/platsmp.c deleted file mode 100644 index 65012afbc1a3..000000000000 --- a/arch/arm/mach-tango/platsmp.c +++ /dev/null @@ -1,52 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/smp.h> -#include "smc.h" - -static int tango_boot_secondary(unsigned int cpu, struct task_struct *idle) -{ - tango_set_aux_boot_addr(__pa_symbol(secondary_startup)); - tango_start_aux_core(cpu); - return 0; -} - -#ifdef CONFIG_HOTPLUG_CPU -/* - * cpu_kill() and cpu_die() run concurrently on different cores. - * Firmware will only "kill" a core once it has properly "died". - * Try a few times to kill a core before giving up, and sleep - * between tries to give that core enough time to die. - */ -static int tango_cpu_kill(unsigned int cpu) -{ - int i, err; - - for (i = 0; i < 10; ++i) { - msleep(10); - err = tango_aux_core_kill(cpu); - if (!err) - return true; - } - - return false; -} - -static void tango_cpu_die(unsigned int cpu) -{ - while (tango_aux_core_die(cpu) < 0) - cpu_relax(); - - panic("cpu %d failed to die\n", cpu); -} -#endif - -static const struct smp_operations tango_smp_ops __initconst = { - .smp_boot_secondary = tango_boot_secondary, -#ifdef CONFIG_HOTPLUG_CPU - .cpu_kill = tango_cpu_kill, - .cpu_die = tango_cpu_die, -#endif -}; - -CPU_METHOD_OF_DECLARE(tango4_smp, "sigma,tango4-smp", &tango_smp_ops); diff --git a/arch/arm/mach-tango/pm.c b/arch/arm/mach-tango/pm.c deleted file mode 100644 index a32c3b631484..000000000000 --- a/arch/arm/mach-tango/pm.c +++ /dev/null @@ -1,31 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include <linux/init.h> -#include <linux/suspend.h> -#include <asm/suspend.h> -#include "smc.h" -#include "pm.h" - -static int tango_pm_powerdown(unsigned long arg) -{ - tango_suspend(__pa_symbol(cpu_resume)); - - return -EIO; /* tango_suspend has failed */ -} - -static int tango_pm_enter(suspend_state_t state) -{ - if (state == PM_SUSPEND_MEM) - return cpu_suspend(0, tango_pm_powerdown); - - return -EINVAL; -} - -static const struct platform_suspend_ops tango_pm_ops = { - .enter = tango_pm_enter, - .valid = suspend_valid_only_mem, -}; - -void __init tango_pm_init(void) -{ - suspend_set_ops(&tango_pm_ops); -} diff --git a/arch/arm/mach-tango/pm.h b/arch/arm/mach-tango/pm.h deleted file mode 100644 index 35ea705a0ee2..000000000000 --- a/arch/arm/mach-tango/pm.h +++ /dev/null @@ -1,7 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ - -#ifdef CONFIG_SUSPEND -void __init tango_pm_init(void); -#else -#define tango_pm_init NULL -#endif diff --git a/arch/arm/mach-tango/setup.c b/arch/arm/mach-tango/setup.c deleted file mode 100644 index 824f90737b04..000000000000 --- a/arch/arm/mach-tango/setup.c +++ /dev/null @@ -1,20 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include <asm/mach/arch.h> -#include <asm/hardware/cache-l2x0.h> -#include "smc.h" -#include "pm.h" - -static void tango_l2c_write(unsigned long val, unsigned int reg) -{ - if (reg == L2X0_CTRL) - tango_set_l2_control(val); -} - -static const char *const tango_dt_compat[] = { "sigma,tango4", NULL }; - -DT_MACHINE_START(TANGO_DT, "Sigma Tango DT") - .dt_compat = tango_dt_compat, - .l2c_aux_mask = ~0, - .l2c_write_sec = tango_l2c_write, - .init_late = tango_pm_init, -MACHINE_END diff --git a/arch/arm/mach-tango/smc.S b/arch/arm/mach-tango/smc.S deleted file mode 100644 index b1752aaa72bc..000000000000 --- a/arch/arm/mach-tango/smc.S +++ /dev/null @@ -1,12 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#include <linux/linkage.h> - - .arch armv7-a - .arch_extension sec -ENTRY(tango_smc) - push {lr} - mov ip, r1 - dsb /* This barrier is probably unnecessary */ - smc #0 - pop {pc} -ENDPROC(tango_smc) diff --git a/arch/arm/mach-tango/smc.h b/arch/arm/mach-tango/smc.h deleted file mode 100644 index 455ce3e06daf..000000000000 --- a/arch/arm/mach-tango/smc.h +++ /dev/null @@ -1,9 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -extern int tango_smc(unsigned int val, unsigned int service); - -#define tango_set_l2_control(val) tango_smc(val, 0x102) -#define tango_start_aux_core(val) tango_smc(val, 0x104) -#define tango_set_aux_boot_addr(val) tango_smc(val, 0x105) -#define tango_suspend(val) tango_smc(val, 0x120) -#define tango_aux_core_die(val) tango_smc(val, 0x121) -#define tango_aux_core_kill(val) tango_smc(val, 0x122) diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S index 0e00ba8cf646..a5a36cce142a 100644 --- a/arch/arm/mach-tegra/sleep-tegra20.S +++ b/arch/arm/mach-tegra/sleep-tegra20.S @@ -43,11 +43,34 @@ #define APB_MISC_XM2CFGCPADCTRL2 0x8e4 #define APB_MISC_XM2CFGDPADCTRL2 0x8e8 -.macro pll_enable, rd, r_car_base, pll_base +#define PLLC_STORE_MASK (1 << 0) +#define PLLM_STORE_MASK (1 << 1) +#define PLLP_STORE_MASK (1 << 2) + +.macro test_pll_state, rd, test_mask + ldr \rd, tegra_pll_state + tst \rd, #\test_mask +.endm + +.macro store_pll_state, rd, tmp, r_car_base, pll_base, pll_mask + ldr \rd, [\r_car_base, #\pll_base] + tst \rd, #(1 << 30) + ldr \rd, tegra_pll_state + biceq \rd, \rd, #\pll_mask + orrne \rd, \rd, #\pll_mask + adr \tmp, tegra_pll_state + str \rd, [\tmp] +.endm + +.macro pll_enable, rd, r_car_base, pll_base, test_mask + test_pll_state \rd, \test_mask + beq 1f + ldr \rd, [\r_car_base, #\pll_base] tst \rd, #(1 << 30) orreq \rd, \rd, #(1 << 30) streq \rd, [\r_car_base, #\pll_base] +1: .endm .macro emc_device_mask, rd, base @@ -177,9 +200,9 @@ ENTRY(tegra20_lp1_reset) str r1, [r0, #CLK_RESET_CCLK_DIVIDER] str r1, [r0, #CLK_RESET_SCLK_DIVIDER] - pll_enable r1, r0, CLK_RESET_PLLM_BASE - pll_enable r1, r0, CLK_RESET_PLLP_BASE - pll_enable r1, r0, CLK_RESET_PLLC_BASE + pll_enable r1, r0, CLK_RESET_PLLM_BASE, PLLM_STORE_MASK + pll_enable r1, r0, CLK_RESET_PLLP_BASE, PLLP_STORE_MASK + pll_enable r1, r0, CLK_RESET_PLLC_BASE, PLLC_STORE_MASK adr r2, tegra20_sdram_pad_address adr r4, tegra20_sdram_pad_save @@ -270,6 +293,10 @@ tegra20_switch_cpu_to_clk32k: add r1, r1, #2 wait_until r1, r7, r9 + store_pll_state r0, r1, r5, CLK_RESET_PLLC_BASE, PLLC_STORE_MASK + store_pll_state r0, r1, r5, CLK_RESET_PLLM_BASE, PLLM_STORE_MASK + store_pll_state r0, r1, r5, CLK_RESET_PLLP_BASE, PLLP_STORE_MASK + /* disable PLLM, PLLP and PLLC */ ldr r0, [r5, #CLK_RESET_PLLM_BASE] bic r0, r0, #(1 << 30) @@ -396,6 +423,9 @@ tegra20_sdram_pad_save: .long 0 .endr +tegra_pll_state: + .word 0x0 + .ltorg /* dummy symbol for end of IRAM */ .align L1_CACHE_SHIFT diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S index 2667bcdb5dc6..0cc40b6b2ba3 100644 --- a/arch/arm/mach-tegra/sleep-tegra30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -71,6 +71,13 @@ #define TEGRA30_POWER_HOTPLUG_SHUTDOWN (1 << 27) /* Hotplug shutdown */ +#define PLLA_STORE_MASK (1 << 0) +#define PLLC_STORE_MASK (1 << 1) +#define PLLM_STORE_MASK (1 << 2) +#define PLLP_STORE_MASK (1 << 3) +#define PLLX_STORE_MASK (1 << 4) +#define PLLM_PMC_STORE_MASK (1 << 5) + .macro emc_device_mask, rd, base ldr \rd, [\base, #EMC_ADR_CFG] tst \rd, #0x1 @@ -87,7 +94,43 @@ bne 1001b .endm -.macro pll_enable, rd, r_car_base, pll_base, pll_misc +.macro test_pll_state, rd, test_mask + ldr \rd, tegra_pll_state + tst \rd, #\test_mask +.endm + +.macro store_pll_state, rd, tmp, r_car_base, pll_base, pll_mask + ldr \rd, [\r_car_base, #\pll_base] + tst \rd, #(1 << 30) + ldr \rd, tegra_pll_state + biceq \rd, \rd, #\pll_mask + orrne \rd, \rd, #\pll_mask + adr \tmp, tegra_pll_state + str \rd, [\tmp] +.endm + +.macro store_pllm_pmc_state, rd, tmp, pmc_base + ldr \rd, [\pmc_base, #PMC_PLLP_WB0_OVERRIDE] + tst \rd, #(1 << 12) + ldr \rd, tegra_pll_state + biceq \rd, \rd, #PLLM_PMC_STORE_MASK + orrne \rd, \rd, #PLLM_PMC_STORE_MASK + adr \tmp, tegra_pll_state + str \rd, [\tmp] +.endm + +.macro pllm_pmc_enable, rd, pmc_base + test_pll_state \rd, PLLM_PMC_STORE_MASK + + ldrne \rd, [\pmc_base, #PMC_PLLP_WB0_OVERRIDE] + orrne \rd, \rd, #(1 << 12) + strne \rd, [\pmc_base, #PMC_PLLP_WB0_OVERRIDE] +.endm + +.macro pll_enable, rd, r_car_base, pll_base, pll_misc, test_mask + test_pll_state \rd, \test_mask + beq 1f + ldr \rd, [\r_car_base, #\pll_base] tst \rd, #(1 << 30) orreq \rd, \rd, #(1 << 30) @@ -102,13 +145,17 @@ orr \rd, \rd, #(1 << 18) str \rd, [\r_car_base, #\pll_misc] .endif +1: .endm -.macro pll_locked, rd, r_car_base, pll_base +.macro pll_locked, rd, r_car_base, pll_base, test_mask + test_pll_state \rd, \test_mask + beq 2f 1: ldr \rd, [\r_car_base, #\pll_base] tst \rd, #(1 << 27) beq 1b +2: .endm .macro pll_iddq_exit, rd, car, iddq, iddq_bit @@ -342,34 +389,30 @@ ENTRY(tegra30_lp1_reset) /* enable PLLM via PMC */ mov32 r2, TEGRA_PMC_BASE - ldr r1, [r2, #PMC_PLLP_WB0_OVERRIDE] - orr r1, r1, #(1 << 12) - str r1, [r2, #PMC_PLLP_WB0_OVERRIDE] + pllm_pmc_enable r1, r2 - pll_enable r1, r0, CLK_RESET_PLLM_BASE, 0 - pll_enable r1, r0, CLK_RESET_PLLC_BASE, 0 - pll_enable r1, r0, CLK_RESET_PLLX_BASE, 0 + pll_enable r1, r0, CLK_RESET_PLLM_BASE, 0, PLLM_STORE_MASK + pll_enable r1, r0, CLK_RESET_PLLC_BASE, 0, PLLC_STORE_MASK + pll_enable r1, r0, CLK_RESET_PLLX_BASE, 0, PLLX_STORE_MASK b _pll_m_c_x_done _no_pll_iddq_exit: /* enable PLLM via PMC */ mov32 r2, TEGRA_PMC_BASE - ldr r1, [r2, #PMC_PLLP_WB0_OVERRIDE] - orr r1, r1, #(1 << 12) - str r1, [r2, #PMC_PLLP_WB0_OVERRIDE] + pllm_pmc_enable r1, r2 - pll_enable r1, r0, CLK_RESET_PLLM_BASE, CLK_RESET_PLLM_MISC - pll_enable r1, r0, CLK_RESET_PLLC_BASE, CLK_RESET_PLLC_MISC + pll_enable r1, r0, CLK_RESET_PLLM_BASE, CLK_RESET_PLLM_MISC, PLLM_STORE_MASK + pll_enable r1, r0, CLK_RESET_PLLC_BASE, CLK_RESET_PLLC_MISC, PLLC_STORE_MASK _pll_m_c_x_done: - pll_enable r1, r0, CLK_RESET_PLLP_BASE, CLK_RESET_PLLP_MISC - pll_enable r1, r0, CLK_RESET_PLLA_BASE, CLK_RESET_PLLA_MISC + pll_enable r1, r0, CLK_RESET_PLLP_BASE, CLK_RESET_PLLP_MISC, PLLP_STORE_MASK + pll_enable r1, r0, CLK_RESET_PLLA_BASE, CLK_RESET_PLLA_MISC, PLLA_STORE_MASK - pll_locked r1, r0, CLK_RESET_PLLM_BASE - pll_locked r1, r0, CLK_RESET_PLLP_BASE - pll_locked r1, r0, CLK_RESET_PLLA_BASE - pll_locked r1, r0, CLK_RESET_PLLC_BASE + pll_locked r1, r0, CLK_RESET_PLLM_BASE, PLLM_STORE_MASK + pll_locked r1, r0, CLK_RESET_PLLP_BASE, PLLP_STORE_MASK + pll_locked r1, r0, CLK_RESET_PLLA_BASE, PLLA_STORE_MASK + pll_locked r1, r0, CLK_RESET_PLLC_BASE, PLLC_STORE_MASK /* * CPUFreq driver could select other PLL for CPU. PLLX will be @@ -380,7 +423,7 @@ _pll_m_c_x_done: cmp r1, #TEGRA30 beq 1f - pll_locked r1, r0, CLK_RESET_PLLX_BASE + pll_locked r1, r0, CLK_RESET_PLLX_BASE, PLLX_STORE_MASK ldr r1, [r0, #CLK_RESET_PLLP_BASE] bic r1, r1, #(1<<31) @ disable PllP bypass @@ -593,6 +636,9 @@ tegra_sdram_pad_save: .long 0 .endr +tegra_pll_state: + .word 0x0 + /* * tegra30_tear_down_core * @@ -641,6 +687,14 @@ tegra30_switch_cpu_to_clk32k: add r1, r1, #2 wait_until r1, r7, r9 + /* store enable-state of PLLs */ + store_pll_state r0, r1, r5, CLK_RESET_PLLA_BASE, PLLA_STORE_MASK + store_pll_state r0, r1, r5, CLK_RESET_PLLC_BASE, PLLC_STORE_MASK + store_pll_state r0, r1, r5, CLK_RESET_PLLM_BASE, PLLM_STORE_MASK + store_pll_state r0, r1, r5, CLK_RESET_PLLP_BASE, PLLP_STORE_MASK + store_pll_state r0, r1, r5, CLK_RESET_PLLX_BASE, PLLX_STORE_MASK + store_pllm_pmc_state r0, r1, r4 + /* disable PLLM via PMC in LP1 */ ldr r0, [r4, #PMC_PLLP_WB0_OVERRIDE] bic r0, r0, #(1 << 12) diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig deleted file mode 100644 index c3c8bf54f033..000000000000 --- a/arch/arm/mach-u300/Kconfig +++ /dev/null @@ -1,32 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -menuconfig ARCH_U300 - bool "ST-Ericsson U300 Series" - depends on ARCH_MULTI_V5 && MMU - select ARM_AMBA - select ARM_VIC - select U300_TIMER - select CPU_ARM926T - select GPIOLIB - select HAVE_TCM - select PINCTRL - select PINCTRL_COH901 - select PINCTRL_U300 - select MFD_SYSCON - help - Support for ST-Ericsson U300 series mobile platforms. - -if ARCH_U300 - -config MACH_U300 - depends on ARCH_U300 - bool "U300" - default y - -config U300_DEBUG - depends on ARCH_U300 - bool "Debug support for U300" - depends on PM - help - Debug support for U300 in sysfs, procfs etc. - -endif diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile deleted file mode 100644 index 67f71ae45dfc..000000000000 --- a/arch/arm/mach-u300/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# Makefile for the linux kernel, U300 machine. -# - -obj-y := core.o - -obj-$(CONFIG_REGULATOR_AB3100) += regulator.o diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c deleted file mode 100644 index a1694d977ec9..000000000000 --- a/arch/arm/mach-u300/core.c +++ /dev/null @@ -1,413 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * - * arch/arm/mach-u300/core.c - * - * Copyright (C) 2007-2012 ST-Ericsson SA - * Core platform support, IRQ handling and device definitions. - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ -#include <linux/kernel.h> -#include <linux/pinctrl/machine.h> -#include <linux/pinctrl/pinconf-generic.h> -#include <linux/platform_data/clk-u300.h> -#include <linux/irqchip.h> -#include <linux/of_address.h> -#include <linux/of_platform.h> -#include <linux/clocksource.h> -#include <linux/clk.h> - -#include <asm/mach/map.h> -#include <asm/mach/arch.h> - -/* - * These are the large blocks of memory allocated for I/O. - * the defines are used for setting up the I/O memory mapping. - */ - -/* NAND Flash CS0 */ -#define U300_NAND_CS0_PHYS_BASE 0x80000000 -/* NFIF */ -#define U300_NAND_IF_PHYS_BASE 0x9f800000 -/* ALE, CLE offset for FSMC NAND */ -#define PLAT_NAND_CLE (1 << 16) -#define PLAT_NAND_ALE (1 << 17) -/* AHB Peripherals */ -#define U300_AHB_PER_PHYS_BASE 0xa0000000 -#define U300_AHB_PER_VIRT_BASE 0xff010000 -/* FAST Peripherals */ -#define U300_FAST_PER_PHYS_BASE 0xc0000000 -#define U300_FAST_PER_VIRT_BASE 0xff020000 -/* SLOW Peripherals */ -#define U300_SLOW_PER_PHYS_BASE 0xc0010000 -#define U300_SLOW_PER_VIRT_BASE 0xff000000 -/* Boot ROM */ -#define U300_BOOTROM_PHYS_BASE 0xffff0000 -#define U300_BOOTROM_VIRT_BASE 0xffff0000 -/* SEMI config base */ -#define U300_SEMI_CONFIG_BASE 0x2FFE0000 - -/* - * AHB peripherals - */ - -/* AHB Peripherals Bridge Controller */ -#define U300_AHB_BRIDGE_BASE (U300_AHB_PER_PHYS_BASE+0x0000) -/* Vectored Interrupt Controller 0, servicing 32 interrupts */ -#define U300_INTCON0_BASE (U300_AHB_PER_PHYS_BASE+0x1000) -#define U300_INTCON0_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x1000) -/* Vectored Interrupt Controller 1, servicing 32 interrupts */ -#define U300_INTCON1_BASE (U300_AHB_PER_PHYS_BASE+0x2000) -#define U300_INTCON1_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x2000) -/* Memory Stick Pro (MSPRO) controller */ -#define U300_MSPRO_BASE (U300_AHB_PER_PHYS_BASE+0x3000) -/* EMIF Configuration Area */ -#define U300_EMIF_CFG_BASE (U300_AHB_PER_PHYS_BASE+0x4000) - -/* - * FAST peripherals - */ - -/* FAST bridge control */ -#define U300_FAST_BRIDGE_BASE (U300_FAST_PER_PHYS_BASE+0x0000) -/* MMC/SD controller */ -#define U300_MMCSD_BASE (U300_FAST_PER_PHYS_BASE+0x1000) -/* PCM I2S0 controller */ -#define U300_PCM_I2S0_BASE (U300_FAST_PER_PHYS_BASE+0x2000) -/* PCM I2S1 controller */ -#define U300_PCM_I2S1_BASE (U300_FAST_PER_PHYS_BASE+0x3000) -/* I2C0 controller */ -#define U300_I2C0_BASE (U300_FAST_PER_PHYS_BASE+0x4000) -/* I2C1 controller */ -#define U300_I2C1_BASE (U300_FAST_PER_PHYS_BASE+0x5000) -/* SPI controller */ -#define U300_SPI_BASE (U300_FAST_PER_PHYS_BASE+0x6000) -/* Fast UART1 on U335 only */ -#define U300_UART1_BASE (U300_FAST_PER_PHYS_BASE+0x7000) - -/* - * SLOW peripherals - */ - -/* SLOW bridge control */ -#define U300_SLOW_BRIDGE_BASE (U300_SLOW_PER_PHYS_BASE) -/* SYSCON */ -#define U300_SYSCON_BASE (U300_SLOW_PER_PHYS_BASE+0x1000) -#define U300_SYSCON_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x1000) -/* Watchdog */ -#define U300_WDOG_BASE (U300_SLOW_PER_PHYS_BASE+0x2000) -/* UART0 */ -#define U300_UART0_BASE (U300_SLOW_PER_PHYS_BASE+0x3000) -/* APP side special timer */ -#define U300_TIMER_APP_BASE (U300_SLOW_PER_PHYS_BASE+0x4000) -#define U300_TIMER_APP_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x4000) -/* Keypad */ -#define U300_KEYPAD_BASE (U300_SLOW_PER_PHYS_BASE+0x5000) -/* GPIO */ -#define U300_GPIO_BASE (U300_SLOW_PER_PHYS_BASE+0x6000) -/* RTC */ -#define U300_RTC_BASE (U300_SLOW_PER_PHYS_BASE+0x7000) -/* Bus tracer */ -#define U300_BUSTR_BASE (U300_SLOW_PER_PHYS_BASE+0x8000) -/* Event handler (hardware queue) */ -#define U300_EVHIST_BASE (U300_SLOW_PER_PHYS_BASE+0x9000) -/* Genric Timer */ -#define U300_TIMER_BASE (U300_SLOW_PER_PHYS_BASE+0xa000) -/* PPM */ -#define U300_PPM_BASE (U300_SLOW_PER_PHYS_BASE+0xb000) - -/* - * REST peripherals - */ - -/* ISP (image signal processor) */ -#define U300_ISP_BASE (0xA0008000) -/* DMA Controller base */ -#define U300_DMAC_BASE (0xC0020000) -/* MSL Base */ -#define U300_MSL_BASE (0xc0022000) -/* APEX Base */ -#define U300_APEX_BASE (0xc0030000) -/* Video Encoder Base */ -#define U300_VIDEOENC_BASE (0xc0080000) -/* XGAM Base */ -#define U300_XGAM_BASE (0xd0000000) - -/* - * SYSCON addresses applicable to the core machine. - */ - -/* Chip ID register 16bit (R/-) */ -#define U300_SYSCON_CIDR (0x400) -/* SMCR */ -#define U300_SYSCON_SMCR (0x4d0) -#define U300_SYSCON_SMCR_FIELD_MASK (0x000e) -#define U300_SYSCON_SMCR_SEMI_SREFACK_IND (0x0008) -#define U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE (0x0004) -#define U300_SYSCON_SMCR_SEMI_EXT_BOOT_MODE_ENABLE (0x0002) -/* CPU_SW_DBGEN Software Debug Enable 16bit (R/W) */ -#define U300_SYSCON_CSDR (0x4f0) -#define U300_SYSCON_CSDR_SW_DEBUG_ENABLE (0x0001) -/* PRINT_CONTROL Print Control 16bit (R/-) */ -#define U300_SYSCON_PCR (0x4f8) -#define U300_SYSCON_PCR_SERV_IND (0x0001) -/* BOOT_CONTROL 16bit (R/-) */ -#define U300_SYSCON_BCR (0x4fc) -#define U300_SYSCON_BCR_ACC_CPU_SUBSYS_VINITHI_IND (0x0400) -#define U300_SYSCON_BCR_APP_CPU_SUBSYS_VINITHI_IND (0x0200) -#define U300_SYSCON_BCR_EXTRA_BOOT_OPTION_MASK (0x01FC) -#define U300_SYSCON_BCR_APP_BOOT_SERV_MASK (0x0003) - -static void __iomem *syscon_base; - -/* - * Static I/O mappings that are needed for booting the U300 platforms. The - * only things we need are the areas where we find the timer, syscon and - * intcon, since the remaining device drivers will map their own memory - * physical to virtual as the need arise. - */ -static struct map_desc u300_io_desc[] __initdata = { - { - .virtual = U300_SLOW_PER_VIRT_BASE, - .pfn = __phys_to_pfn(U300_SLOW_PER_PHYS_BASE), - .length = SZ_64K, - .type = MT_DEVICE, - }, - { - .virtual = U300_AHB_PER_VIRT_BASE, - .pfn = __phys_to_pfn(U300_AHB_PER_PHYS_BASE), - .length = SZ_32K, - .type = MT_DEVICE, - }, - { - .virtual = U300_FAST_PER_VIRT_BASE, - .pfn = __phys_to_pfn(U300_FAST_PER_PHYS_BASE), - .length = SZ_32K, - .type = MT_DEVICE, - }, -}; - -static void __init u300_map_io(void) -{ - iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc)); -} - -static unsigned long pin_pullup_conf[] = { - PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 1), -}; - -static unsigned long pin_highz_conf[] = { - PIN_CONF_PACKED(PIN_CONFIG_BIAS_HIGH_IMPEDANCE, 0), -}; - -/* Pin control settings */ -static const struct pinctrl_map u300_pinmux_map[] = { - /* anonymous maps for chip power and EMIFs */ - PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "power"), - PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "emif0"), - PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "emif1"), - /* per-device maps for MMC/SD, SPI and UART */ - PIN_MAP_MUX_GROUP_DEFAULT("mmci", "pinctrl-u300", NULL, "mmc0"), - PIN_MAP_MUX_GROUP_DEFAULT("pl022", "pinctrl-u300", NULL, "spi0"), - PIN_MAP_MUX_GROUP_DEFAULT("uart0", "pinctrl-u300", NULL, "uart0"), - /* This pin is used for clock return rather than GPIO */ - PIN_MAP_CONFIGS_PIN_DEFAULT("mmci", "pinctrl-u300", "PIO APP GPIO 11", - pin_pullup_conf), - /* This pin is used for card detect */ - PIN_MAP_CONFIGS_PIN_DEFAULT("mmci", "pinctrl-u300", "PIO MS INS", - pin_highz_conf), -}; - -struct db_chip { - u16 chipid; - const char *name; -}; - -/* - * This is a list of the Digital Baseband chips used in the U300 platform. - */ -static struct db_chip db_chips[] __initdata = { - { - .chipid = 0xb800, - .name = "DB3000", - }, - { - .chipid = 0xc000, - .name = "DB3100", - }, - { - .chipid = 0xc800, - .name = "DB3150", - }, - { - .chipid = 0xd800, - .name = "DB3200", - }, - { - .chipid = 0xe000, - .name = "DB3250", - }, - { - .chipid = 0xe800, - .name = "DB3210", - }, - { - .chipid = 0xf000, - .name = "DB3350 P1x", - }, - { - .chipid = 0xf100, - .name = "DB3350 P2x", - }, - { - .chipid = 0x0000, /* List terminator */ - .name = NULL, - } -}; - -static void __init u300_init_check_chip(void) -{ - - u16 val; - struct db_chip *chip; - const char *chipname; - const char unknown[] = "UNKNOWN"; - - /* Read out and print chip ID */ - val = readw(syscon_base + U300_SYSCON_CIDR); - /* This is in funky bigendian order... */ - val = (val & 0xFFU) << 8 | (val >> 8); - chip = db_chips; - chipname = unknown; - - for ( ; chip->chipid; chip++) { - if (chip->chipid == (val & 0xFF00U)) { - chipname = chip->name; - break; - } - } - printk(KERN_INFO "Initializing U300 system on %s baseband chip " \ - "(chip ID 0x%04x)\n", chipname, val); - - if ((val & 0xFF00U) != 0xf000 && (val & 0xFF00U) != 0xf100) { - printk(KERN_ERR "Platform configured for BS335 " \ - " with DB3350 but %s detected, expect problems!", - chipname); - } -} - -/* Forward declare this function from the watchdog */ -void coh901327_watchdog_reset(void); - -static void u300_restart(enum reboot_mode mode, const char *cmd) -{ - switch (mode) { - case REBOOT_SOFT: - case REBOOT_HARD: -#ifdef CONFIG_COH901327_WATCHDOG - coh901327_watchdog_reset(); -#endif - break; - default: - /* Do nothing */ - break; - } - /* Wait for system do die/reset. */ - while (1); -} - -/* These are mostly to get the right device names for the clock lookups */ -static struct of_dev_auxdata u300_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("stericsson,pinctrl-u300", U300_SYSCON_BASE, - "pinctrl-u300", NULL), - OF_DEV_AUXDATA("stericsson,gpio-coh901", U300_GPIO_BASE, - "u300-gpio", NULL), - OF_DEV_AUXDATA("stericsson,coh901327", U300_WDOG_BASE, - "coh901327_wdog", NULL), - OF_DEV_AUXDATA("stericsson,coh901331", U300_RTC_BASE, - "rtc-coh901331", NULL), - OF_DEV_AUXDATA("stericsson,coh901318", U300_DMAC_BASE, - "coh901318", NULL), - OF_DEV_AUXDATA("stericsson,fsmc-nand", U300_NAND_IF_PHYS_BASE, - "fsmc-nand", NULL), - OF_DEV_AUXDATA("arm,primecell", U300_UART0_BASE, - "uart0", NULL), - OF_DEV_AUXDATA("arm,primecell", U300_UART1_BASE, - "uart1", NULL), - OF_DEV_AUXDATA("arm,primecell", U300_SPI_BASE, - "pl022", NULL), - OF_DEV_AUXDATA("st,ddci2c", U300_I2C0_BASE, - "stu300.0", NULL), - OF_DEV_AUXDATA("st,ddci2c", U300_I2C1_BASE, - "stu300.1", NULL), - OF_DEV_AUXDATA("arm,primecell", U300_MMCSD_BASE, - "mmci", NULL), - { /* sentinel */ }, -}; - -static void __init u300_init_irq_dt(void) -{ - struct device_node *syscon; - struct clk *clk; - - syscon = of_find_node_by_path("/syscon@c0011000"); - if (!syscon) { - pr_crit("could not find syscon node\n"); - return; - } - syscon_base = of_iomap(syscon, 0); - if (!syscon_base) { - pr_crit("could not remap syscon\n"); - return; - } - /* initialize clocking early, we want to clock the INTCON */ - u300_clk_init(syscon_base); - - /* Bootstrap EMIF and SEMI clocks */ - clk = clk_get_sys("pl172", NULL); - BUG_ON(IS_ERR(clk)); - clk_prepare_enable(clk); - clk = clk_get_sys("semi", NULL); - BUG_ON(IS_ERR(clk)); - clk_prepare_enable(clk); - - /* Clock the interrupt controller */ - clk = clk_get_sys("intcon", NULL); - BUG_ON(IS_ERR(clk)); - clk_prepare_enable(clk); - - irqchip_init(); -} - -static void __init u300_init_machine_dt(void) -{ - u16 val; - - /* Check what platform we run and print some status information */ - u300_init_check_chip(); - - /* Initialize pinmuxing */ - pinctrl_register_mappings(u300_pinmux_map, - ARRAY_SIZE(u300_pinmux_map)); - - of_platform_default_populate(NULL, u300_auxdata_lookup, NULL); - - /* Enable SEMI self refresh */ - val = readw(syscon_base + U300_SYSCON_SMCR) | - U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE; - writew(val, syscon_base + U300_SYSCON_SMCR); -} - -static const char * u300_board_compat[] = { - "stericsson,u300", - NULL, -}; - -DT_MACHINE_START(U300_DT, "U300 S335/B335 (Device Tree)") - .map_io = u300_map_io, - .init_irq = u300_init_irq_dt, - .init_time = timer_probe, - .init_machine = u300_init_machine_dt, - .restart = u300_restart, - .dt_compat = u300_board_compat, -MACHINE_END diff --git a/arch/arm/mach-u300/regulator.c b/arch/arm/mach-u300/regulator.c deleted file mode 100644 index c0cc1d82e1b9..000000000000 --- a/arch/arm/mach-u300/regulator.c +++ /dev/null @@ -1,134 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arm/mach-u300/regulator.c - * - * Copyright (C) 2009 ST-Ericsson AB - * Handle board-bound regulators and board power not related - * to any devices. - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ -#include <linux/device.h> -#include <linux/signal.h> -#include <linux/err.h> -#include <linux/of.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/consumer.h> -#include <linux/mfd/syscon.h> -#include <linux/regmap.h> - -/* Power Management Control 16bit (R/W) */ -#define U300_SYSCON_PMCR (0x50) -#define U300_SYSCON_PMCR_DCON_ENABLE (0x0002) -#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE (0x0001) - -/* - * Regulators that power the board and chip and which are - * not copuled to specific drivers are hogged in these - * instances. - */ -static struct regulator *main_power_15; - -/* - * This function is used from pm.h to shut down the system by - * resetting all regulators in turn and then disable regulator - * LDO D (main power). - */ -void u300_pm_poweroff(void) -{ - sigset_t old, all; - - sigfillset(&all); - if (!sigprocmask(SIG_BLOCK, &all, &old)) { - /* Disable LDO D to shut down the system */ - if (main_power_15) - regulator_disable(main_power_15); - else - pr_err("regulator not available to shut down system\n"); - (void) sigprocmask(SIG_SETMASK, &old, NULL); - } - return; -} - -/* - * Hog the regulators needed to power up the board. - */ -static int __init __u300_init_boardpower(struct platform_device *pdev) -{ - struct device_node *np = pdev->dev.of_node; - struct device_node *syscon_np; - struct regmap *regmap; - int err; - - pr_info("U300: setting up board power\n"); - - syscon_np = of_parse_phandle(np, "syscon", 0); - if (!syscon_np) { - pr_crit("U300: no syscon node\n"); - return -ENODEV; - } - regmap = syscon_node_to_regmap(syscon_np); - if (IS_ERR(regmap)) { - pr_crit("U300: could not locate syscon regmap\n"); - return PTR_ERR(regmap); - } - - main_power_15 = regulator_get(&pdev->dev, "vana15"); - - if (IS_ERR(main_power_15)) { - pr_err("could not get vana15"); - return PTR_ERR(main_power_15); - } - err = regulator_enable(main_power_15); - if (err) { - pr_err("could not enable vana15\n"); - return err; - } - - /* - * On U300 a special system controller register pulls up the DC - * until the vana15 (LDO D) regulator comes up. At this point, all - * regulators are set and we do not need power control via - * DC ON anymore. This function will likely be moved whenever - * the rest of the U300 power management is implemented. - */ - pr_info("U300: disable system controller pull-up\n"); - regmap_update_bits(regmap, U300_SYSCON_PMCR, - U300_SYSCON_PMCR_DCON_ENABLE, 0); - - /* Register globally exported PM poweroff hook */ - pm_power_off = u300_pm_poweroff; - - return 0; -} - -static int __init s365_board_probe(struct platform_device *pdev) -{ - return __u300_init_boardpower(pdev); -} - -static const struct of_device_id s365_board_match[] = { - { .compatible = "stericsson,s365" }, - {}, -}; - -static struct platform_driver s365_board_driver = { - .driver = { - .name = "s365-board", - .of_match_table = s365_board_match, - }, -}; - -/* - * So at module init time we hog the regulator! - */ -static int __init u300_init_boardpower(void) -{ - return platform_driver_probe(&s365_board_driver, - s365_board_probe); -} - -device_initcall(u300_init_boardpower); -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Linus Walleij"); diff --git a/arch/arm/mach-zx/Kconfig b/arch/arm/mach-zx/Kconfig deleted file mode 100644 index ea29c84a7849..000000000000 --- a/arch/arm/mach-zx/Kconfig +++ /dev/null @@ -1,21 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -menuconfig ARCH_ZX - bool "ZTE ZX family" - depends on ARCH_MULTI_V7 - help - Support for ZTE ZX-based family of processors. TV - set-top-box processor is supported. More will be - added soon. - -if ARCH_ZX - -config SOC_ZX296702 - def_bool y - select ARM_GIC - select ARM_GLOBAL_TIMER - select HAVE_ARM_SCU if SMP - select HAVE_ARM_TWD if SMP - select PM_GENERIC_DOMAINS if PM - help - Support for ZTE ZX296702 SoC which is a dual core CortexA9MP -endif diff --git a/arch/arm/mach-zx/Makefile b/arch/arm/mach-zx/Makefile deleted file mode 100644 index 6f8930cdb8fb..000000000000 --- a/arch/arm/mach-zx/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -obj-$(CONFIG_SOC_ZX296702) += zx296702.o zx296702-pm-domain.o -obj-$(CONFIG_SMP) += headsmp.o platsmp.o diff --git a/arch/arm/mach-zx/core.h b/arch/arm/mach-zx/core.h deleted file mode 100644 index 25fe873892c9..000000000000 --- a/arch/arm/mach-zx/core.h +++ /dev/null @@ -1,16 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright 2014 Linaro Ltd. - * Copyright (C) 2014 ZTE Corporation. - */ - -#ifndef __MACH_ZX_CORE_H -#define __MACH_ZX_CORE_H - -extern void zx_resume_jump(void); -extern size_t zx_suspend_iram_sz; -extern unsigned long zx_secondary_startup_pa; - -void zx_secondary_startup(void); - -#endif /* __MACH_ZX_CORE_H */ diff --git a/arch/arm/mach-zx/headsmp.S b/arch/arm/mach-zx/headsmp.S deleted file mode 100644 index 0846859b0573..000000000000 --- a/arch/arm/mach-zx/headsmp.S +++ /dev/null @@ -1,30 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright 2014 Linaro Ltd. - * Copyright (C) 2014 ZTE Corporation. - */ - -#include <linux/linkage.h> - - .align 3 - .arm - -/* It runs from physical address */ -ENTRY(zx_resume_jump) - adr r1, zx_secondary_startup_pa - ldr r0, [r1] - bx r0 -ENDPROC(zx_resume_jump) - -ENTRY(zx_secondary_startup_pa) - .word zx_secondary_startup_pa - -ENTRY(zx_suspend_iram_sz) - .word . - zx_resume_jump -ENDPROC(zx_secondary_startup_pa) - - -ENTRY(zx_secondary_startup) - bl v7_invalidate_l1 - b secondary_startup -ENDPROC(zx_secondary_startup) diff --git a/arch/arm/mach-zx/platsmp.c b/arch/arm/mach-zx/platsmp.c deleted file mode 100644 index d4e1d3792224..000000000000 --- a/arch/arm/mach-zx/platsmp.c +++ /dev/null @@ -1,186 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright 2014 Linaro Ltd. - * Copyright (C) 2014 ZTE Corporation. - */ - -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/jiffies.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/smp.h> - -#include <asm/cacheflush.h> -#include <asm/cp15.h> -#include <asm/fncpy.h> -#include <asm/proc-fns.h> -#include <asm/smp_scu.h> -#include <asm/smp_plat.h> - -#include "core.h" - -#define AON_SYS_CTRL_RESERVED1 0xa8 - -#define BUS_MATRIX_REMAP_CONFIG 0x00 - -#define PCU_CPU0_CTRL 0x00 -#define PCU_CPU1_CTRL 0x04 -#define PCU_CPU1_ST 0x0c -#define PCU_GLOBAL_CTRL 0x14 -#define PCU_EXPEND_CONTROL 0x34 - -#define ZX_IRAM_BASE 0x00200000 - -static void __iomem *pcu_base; -static void __iomem *matrix_base; -static void __iomem *scu_base; - -void __init zx_smp_prepare_cpus(unsigned int max_cpus) -{ - struct device_node *np; - unsigned long base = 0; - void __iomem *aonsysctrl_base; - void __iomem *sys_iram; - - base = scu_a9_get_base(); - scu_base = ioremap(base, SZ_256); - if (!scu_base) { - pr_err("%s: failed to map scu\n", __func__); - return; - } - - scu_enable(scu_base); - - np = of_find_compatible_node(NULL, NULL, "zte,sysctrl"); - if (!np) { - pr_err("%s: failed to find sysctrl node\n", __func__); - return; - } - - aonsysctrl_base = of_iomap(np, 0); - if (!aonsysctrl_base) { - pr_err("%s: failed to map aonsysctrl\n", __func__); - of_node_put(np); - return; - } - - /* - * Write the address of secondary startup into the - * system-wide flags register. The BootMonitor waits - * until it receives a soft interrupt, and then the - * secondary CPU branches to this address. - */ - __raw_writel(__pa_symbol(zx_secondary_startup), - aonsysctrl_base + AON_SYS_CTRL_RESERVED1); - - iounmap(aonsysctrl_base); - of_node_put(np); - - np = of_find_compatible_node(NULL, NULL, "zte,zx296702-pcu"); - pcu_base = of_iomap(np, 0); - of_node_put(np); - WARN_ON(!pcu_base); - - np = of_find_compatible_node(NULL, NULL, "zte,zx-bus-matrix"); - matrix_base = of_iomap(np, 0); - of_node_put(np); - WARN_ON(!matrix_base); - - /* Map the first 4 KB IRAM for suspend usage */ - sys_iram = __arm_ioremap_exec(ZX_IRAM_BASE, PAGE_SIZE, false); - zx_secondary_startup_pa = __pa_symbol(zx_secondary_startup); - fncpy(sys_iram, &zx_resume_jump, zx_suspend_iram_sz); -} - -static int zx_boot_secondary(unsigned int cpu, struct task_struct *idle) -{ - static bool first_boot = true; - - if (first_boot) { - arch_send_wakeup_ipi_mask(cpumask_of(cpu)); - first_boot = false; - return 0; - } - - /* Swap the base address mapping between IRAM and IROM */ - writel_relaxed(0x1, matrix_base + BUS_MATRIX_REMAP_CONFIG); - - /* Power on CPU1 */ - writel_relaxed(0x0, pcu_base + PCU_CPU1_CTRL); - - /* Wait for power on ack */ - while (readl_relaxed(pcu_base + PCU_CPU1_ST) & 0x4) - cpu_relax(); - - /* Swap back the mapping of IRAM and IROM */ - writel_relaxed(0x0, matrix_base + BUS_MATRIX_REMAP_CONFIG); - - return 0; -} - -#ifdef CONFIG_HOTPLUG_CPU -static inline void cpu_enter_lowpower(void) -{ - unsigned int v; - - asm volatile( - "mcr p15, 0, %1, c7, c5, 0\n" - " mcr p15, 0, %1, c7, c10, 4\n" - /* - * Turn off coherency - */ - " mrc p15, 0, %0, c1, c0, 1\n" - " bic %0, %0, %3\n" - " mcr p15, 0, %0, c1, c0, 1\n" - " mrc p15, 0, %0, c1, c0, 0\n" - " bic %0, %0, %2\n" - " mcr p15, 0, %0, c1, c0, 0\n" - : "=&r" (v) - : "r" (0), "Ir" (CR_C), "Ir" (0x40) - : "cc"); -} - -static int zx_cpu_kill(unsigned int cpu) -{ - unsigned long timeout = jiffies + msecs_to_jiffies(2000); - - writel_relaxed(0x2, pcu_base + PCU_CPU1_CTRL); - - while ((readl_relaxed(pcu_base + PCU_CPU1_ST) & 0x3) != 0x0) { - if (time_after(jiffies, timeout)) { - pr_err("*** cpu1 poweroff timeout\n"); - break; - } - } - return 1; -} - -static void zx_cpu_die(unsigned int cpu) -{ - scu_power_mode(scu_base, SCU_PM_POWEROFF); - cpu_enter_lowpower(); - - while (1) - cpu_do_idle(); -} -#endif - -static void zx_secondary_init(unsigned int cpu) -{ - scu_power_mode(scu_base, SCU_PM_NORMAL); -} - -static const struct smp_operations zx_smp_ops __initconst = { - .smp_prepare_cpus = zx_smp_prepare_cpus, - .smp_secondary_init = zx_secondary_init, - .smp_boot_secondary = zx_boot_secondary, -#ifdef CONFIG_HOTPLUG_CPU - .cpu_kill = zx_cpu_kill, - .cpu_die = zx_cpu_die, -#endif -}; - -CPU_METHOD_OF_DECLARE(zx_smp, "zte,zx296702-smp", &zx_smp_ops); diff --git a/arch/arm/mach-zx/zx296702-pm-domain.c b/arch/arm/mach-zx/zx296702-pm-domain.c deleted file mode 100644 index 7a08bf9dd792..000000000000 --- a/arch/arm/mach-zx/zx296702-pm-domain.c +++ /dev/null @@ -1,202 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2015 Linaro Ltd. - * - * Author: Jun Nie <jun.nie@linaro.org> - */ -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/of.h> -#include <linux/platform_device.h> -#include <linux/pm_domain.h> -#include <linux/slab.h> - -#define PCU_DM_CLKEN 0x18 -#define PCU_DM_RSTEN 0x1C -#define PCU_DM_ISOEN 0x20 -#define PCU_DM_PWRDN 0x24 -#define PCU_DM_ACK_SYNC 0x28 - -enum { - PCU_DM_NEON0 = 0, - PCU_DM_NEON1, - PCU_DM_GPU, - PCU_DM_DECPPU, - PCU_DM_VOU, - PCU_DM_R2D, - PCU_DM_TOP, -}; - -static void __iomem *pcubase; - -struct zx_pm_domain { - struct generic_pm_domain dm; - unsigned int bit; -}; - -static int normal_power_off(struct generic_pm_domain *domain) -{ - struct zx_pm_domain *zpd = (struct zx_pm_domain *)domain; - unsigned long loop = 1000; - u32 tmp; - - tmp = readl_relaxed(pcubase + PCU_DM_CLKEN); - tmp &= ~BIT(zpd->bit); - writel_relaxed(tmp, pcubase + PCU_DM_CLKEN); - udelay(5); - - tmp = readl_relaxed(pcubase + PCU_DM_ISOEN); - tmp &= ~BIT(zpd->bit); - writel_relaxed(tmp | BIT(zpd->bit), pcubase + PCU_DM_ISOEN); - udelay(5); - - tmp = readl_relaxed(pcubase + PCU_DM_RSTEN); - tmp &= ~BIT(zpd->bit); - writel_relaxed(tmp, pcubase + PCU_DM_RSTEN); - udelay(5); - - tmp = readl_relaxed(pcubase + PCU_DM_PWRDN); - tmp &= ~BIT(zpd->bit); - writel_relaxed(tmp | BIT(zpd->bit), pcubase + PCU_DM_PWRDN); - do { - tmp = readl_relaxed(pcubase + PCU_DM_ACK_SYNC) & BIT(zpd->bit); - } while (--loop && !tmp); - - if (!loop) { - pr_err("Error: %s %s fail\n", __func__, domain->name); - return -EIO; - } - - return 0; -} - -static int normal_power_on(struct generic_pm_domain *domain) -{ - struct zx_pm_domain *zpd = (struct zx_pm_domain *)domain; - unsigned long loop = 10000; - u32 tmp; - - tmp = readl_relaxed(pcubase + PCU_DM_PWRDN); - tmp &= ~BIT(zpd->bit); - writel_relaxed(tmp, pcubase + PCU_DM_PWRDN); - do { - tmp = readl_relaxed(pcubase + PCU_DM_ACK_SYNC) & BIT(zpd->bit); - } while (--loop && tmp); - - if (!loop) { - pr_err("Error: %s %s fail\n", __func__, domain->name); - return -EIO; - } - - tmp = readl_relaxed(pcubase + PCU_DM_RSTEN); - tmp &= ~BIT(zpd->bit); - writel_relaxed(tmp | BIT(zpd->bit), pcubase + PCU_DM_RSTEN); - udelay(5); - - tmp = readl_relaxed(pcubase + PCU_DM_ISOEN); - tmp &= ~BIT(zpd->bit); - writel_relaxed(tmp, pcubase + PCU_DM_ISOEN); - udelay(5); - - tmp = readl_relaxed(pcubase + PCU_DM_CLKEN); - tmp &= ~BIT(zpd->bit); - writel_relaxed(tmp | BIT(zpd->bit), pcubase + PCU_DM_CLKEN); - udelay(5); - return 0; -} - -static struct zx_pm_domain gpu_domain = { - .dm = { - .name = "gpu_domain", - .power_off = normal_power_off, - .power_on = normal_power_on, - }, - .bit = PCU_DM_GPU, -}; - -static struct zx_pm_domain decppu_domain = { - .dm = { - .name = "decppu_domain", - .power_off = normal_power_off, - .power_on = normal_power_on, - }, - .bit = PCU_DM_DECPPU, -}; - -static struct zx_pm_domain vou_domain = { - .dm = { - .name = "vou_domain", - .power_off = normal_power_off, - .power_on = normal_power_on, - }, - .bit = PCU_DM_VOU, -}; - -static struct zx_pm_domain r2d_domain = { - .dm = { - .name = "r2d_domain", - .power_off = normal_power_off, - .power_on = normal_power_on, - }, - .bit = PCU_DM_R2D, -}; - -static struct generic_pm_domain *zx296702_pm_domains[] = { - &vou_domain.dm, - &gpu_domain.dm, - &decppu_domain.dm, - &r2d_domain.dm, -}; - -static int zx296702_pd_probe(struct platform_device *pdev) -{ - struct genpd_onecell_data *genpd_data; - struct resource *res; - int i; - - genpd_data = devm_kzalloc(&pdev->dev, sizeof(*genpd_data), GFP_KERNEL); - if (!genpd_data) - return -ENOMEM; - - genpd_data->domains = zx296702_pm_domains; - genpd_data->num_domains = ARRAY_SIZE(zx296702_pm_domains); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "no memory resource defined\n"); - return -ENODEV; - } - - pcubase = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(pcubase)) { - dev_err(&pdev->dev, "ioremap fail.\n"); - return -EIO; - } - - for (i = 0; i < ARRAY_SIZE(zx296702_pm_domains); ++i) - pm_genpd_init(zx296702_pm_domains[i], NULL, false); - - of_genpd_add_provider_onecell(pdev->dev.of_node, genpd_data); - return 0; -} - -static const struct of_device_id zx296702_pm_domain_matches[] __initconst = { - { .compatible = "zte,zx296702-pcu", }, - { }, -}; - -static struct platform_driver zx296702_pd_driver __initdata = { - .driver = { - .name = "zx-powerdomain", - .owner = THIS_MODULE, - .of_match_table = zx296702_pm_domain_matches, - }, - .probe = zx296702_pd_probe, -}; - -static int __init zx296702_pd_init(void) -{ - return platform_driver_register(&zx296702_pd_driver); -} -subsys_initcall(zx296702_pd_init); diff --git a/arch/arm/mach-zx/zx296702.c b/arch/arm/mach-zx/zx296702.c deleted file mode 100644 index fd8fa3a074fa..000000000000 --- a/arch/arm/mach-zx/zx296702.c +++ /dev/null @@ -1,22 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright 2014 Linaro Ltd. - * Copyright (C) 2014 ZTE Corporation. - */ - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <linux/of_address.h> -#include <linux/of_platform.h> - -static const char *const zx296702_dt_compat[] __initconst = { - "zte,zx296702", - NULL, -}; - -DT_MACHINE_START(ZX, "ZTE ZX296702 (Device Tree)") - .dt_compat = zx296702_dt_compat, - .l2c_aux_val = 0, - .l2c_aux_mask = ~0, -MACHINE_END diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 02692fbe2db5..35f43d0aa056 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -638,7 +638,6 @@ config CPU_V7M_NUM_IRQ int "Number of external interrupts connected to the NVIC" depends on CPU_V7M default 90 if ARCH_STM32 - default 38 if ARCH_EFM32 default 112 if SOC_VF610 default 240 help diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index 0207b6ea6e8a..897634d0a67c 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -1620,10 +1620,9 @@ exit: } emit_str_r(dst_lo, tmp2, off, ctx, BPF_SIZE(code)); break; - /* STX XADD: lock *(u32 *)(dst + off) += src */ - case BPF_STX | BPF_XADD | BPF_W: - /* STX XADD: lock *(u64 *)(dst + off) += src */ - case BPF_STX | BPF_XADD | BPF_DW: + /* Atomic ops */ + case BPF_STX | BPF_ATOMIC | BPF_W: + case BPF_STX | BPF_ATOMIC | BPF_DW: goto notyet; /* STX: *(size *)(dst + off) = src */ case BPF_STX | BPF_MEM | BPF_W: diff --git a/arch/arm/oprofile/Makefile b/arch/arm/oprofile/Makefile deleted file mode 100644 index 39688dc9f181..000000000000 --- a/arch/arm/oprofile/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_OPROFILE) += oprofile.o - -DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \ - oprof.o cpu_buffer.o buffer_sync.o \ - event_buffer.o oprofile_files.o \ - oprofilefs.o oprofile_stats.o \ - timer_int.o ) - -ifeq ($(CONFIG_HW_PERF_EVENTS),y) -DRIVER_OBJS += $(addprefix ../../../drivers/oprofile/, oprofile_perf.o) -endif - -oprofile-y := $(DRIVER_OBJS) common.o diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c deleted file mode 100644 index 7cb3e0453fcd..000000000000 --- a/arch/arm/oprofile/common.c +++ /dev/null @@ -1,132 +0,0 @@ -/** - * @file common.c - * - * @remark Copyright 2004 Oprofile Authors - * @remark Copyright 2010 ARM Ltd. - * @remark Read the file COPYING - * - * @author Zwane Mwaikambo - * @author Will Deacon [move to perf] - */ - -#include <linux/cpumask.h> -#include <linux/init.h> -#include <linux/mutex.h> -#include <linux/oprofile.h> -#include <linux/perf_event.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <asm/stacktrace.h> -#include <linux/uaccess.h> - -#include <asm/perf_event.h> -#include <asm/ptrace.h> - -#ifdef CONFIG_HW_PERF_EVENTS - -/* - * OProfile has a curious naming scheme for the ARM PMUs, but they are - * part of the user ABI so we need to map from the perf PMU name for - * supported PMUs. - */ -static struct op_perf_name { - char *perf_name; - char *op_name; -} op_perf_name_map[] = { - { "armv5_xscale1", "arm/xscale1" }, - { "armv5_xscale2", "arm/xscale2" }, - { "armv6_1136", "arm/armv6" }, - { "armv6_1156", "arm/armv6" }, - { "armv6_1176", "arm/armv6" }, - { "armv6_11mpcore", "arm/mpcore" }, - { "armv7_cortex_a8", "arm/armv7" }, - { "armv7_cortex_a9", "arm/armv7-ca9" }, -}; - -char *op_name_from_perf_id(void) -{ - int i; - struct op_perf_name names; - const char *perf_name = perf_pmu_name(); - - for (i = 0; i < ARRAY_SIZE(op_perf_name_map); ++i) { - names = op_perf_name_map[i]; - if (!strcmp(names.perf_name, perf_name)) - return names.op_name; - } - - return NULL; -} -#endif - -static int report_trace(struct stackframe *frame, void *d) -{ - unsigned int *depth = d; - - if (*depth) { - oprofile_add_trace(frame->pc); - (*depth)--; - } - - return *depth == 0; -} - -/* - * The registers we're interested in are at the end of the variable - * length saved register structure. The fp points at the end of this - * structure so the address of this struct is: - * (struct frame_tail *)(xxx->fp)-1 - */ -struct frame_tail { - struct frame_tail *fp; - unsigned long sp; - unsigned long lr; -} __attribute__((packed)); - -static struct frame_tail* user_backtrace(struct frame_tail *tail) -{ - struct frame_tail buftail[2]; - - /* Also check accessibility of one struct frame_tail beyond */ - if (!access_ok(tail, sizeof(buftail))) - return NULL; - if (__copy_from_user_inatomic(buftail, tail, sizeof(buftail))) - return NULL; - - oprofile_add_trace(buftail[0].lr); - - /* frame pointers should strictly progress back up the stack - * (towards higher addresses) */ - if (tail + 1 >= buftail[0].fp) - return NULL; - - return buftail[0].fp-1; -} - -static void arm_backtrace(struct pt_regs * const regs, unsigned int depth) -{ - struct frame_tail *tail = ((struct frame_tail *) regs->ARM_fp) - 1; - - if (!user_mode(regs)) { - struct stackframe frame; - arm_get_current_stackframe(regs, &frame); - walk_stackframe(&frame, report_trace, &depth); - return; - } - - while (depth-- && tail && !((unsigned long) tail & 3)) - tail = user_backtrace(tail); -} - -int __init oprofile_arch_init(struct oprofile_operations *ops) -{ - /* provide backtrace support also in timer mode: */ - ops->backtrace = arm_backtrace; - - return oprofile_perf_init(ops); -} - -void oprofile_arch_exit(void) -{ - oprofile_perf_exit(); -} diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index 60e901cd0de6..8ad576ecd0f1 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -370,8 +370,6 @@ static int __init xen_guest_init(void) return -ENOMEM; } gnttab_init(); - if (!xen_initial_domain()) - xenbus_probe(NULL); /* * Making sure board specific code will not set up ops for diff --git a/arch/arm/xen/p2m.c b/arch/arm/xen/p2m.c index e52950a43f2e..fd6e3aafe272 100644 --- a/arch/arm/xen/p2m.c +++ b/arch/arm/xen/p2m.c @@ -95,8 +95,10 @@ int set_foreign_p2m_mapping(struct gnttab_map_grant_ref *map_ops, for (i = 0; i < count; i++) { if (map_ops[i].status) continue; - set_phys_to_machine(map_ops[i].host_addr >> XEN_PAGE_SHIFT, - map_ops[i].dev_bus_addr >> XEN_PAGE_SHIFT); + if (unlikely(!set_phys_to_machine(map_ops[i].host_addr >> XEN_PAGE_SHIFT, + map_ops[i].dev_bus_addr >> XEN_PAGE_SHIFT))) { + return -ENOMEM; + } } return 0; |