summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/Kconfig33
-rw-r--r--arch/arm/include/debug/brcmstb.S18
-rw-r--r--arch/arm/mach-at91/Makefile34
-rw-r--r--arch/arm/mach-at91/at91rm9200.c15
-rw-r--r--arch/arm/mach-at91/at91sam9.c91
-rw-r--r--arch/arm/mach-at91/generic.h8
-rw-r--r--arch/arm/mach-at91/pm.c199
-rw-r--r--arch/arm/mach-at91/pm.h24
-rw-r--r--arch/arm/mach-at91/pm_data-offsets.c13
-rw-r--r--arch/arm/mach-at91/pm_suspend.S31
-rw-r--r--arch/arm/mach-at91/sama5.c52
-rw-r--r--arch/arm/mach-at91/soc.c142
-rw-r--r--arch/arm/mach-at91/soc.h91
-rw-r--r--arch/arm/mach-bcm/Kconfig2
-rw-r--r--arch/arm/mach-davinci/board-da850-evm.c4
-rw-r--r--arch/arm/mach-davinci/board-dm644x-evm.c3
-rw-r--r--arch/arm/mach-davinci/board-dm646x-evm.c3
-rw-r--r--arch/arm/mach-davinci/board-neuros-osd2.c3
-rw-r--r--arch/arm/mach-davinci/da830.c6
-rw-r--r--arch/arm/mach-davinci/da850.c6
-rw-r--r--arch/arm/mach-davinci/da8xx-dt.c1
-rw-r--r--arch/arm/mach-davinci/pdata-quirks.c178
-rw-r--r--arch/arm/mach-davinci/pm.c1
-rw-r--r--arch/arm/mach-gemini/Kconfig53
-rw-r--r--arch/arm/mach-gemini/Makefile15
-rw-r--r--arch/arm/mach-gemini/Makefile.boot9
-rw-r--r--arch/arm/mach-gemini/board-dt.c62
-rw-r--r--arch/arm/mach-gemini/board-nas4220b.c106
-rw-r--r--arch/arm/mach-gemini/board-rut1xx.c92
-rw-r--r--arch/arm/mach-gemini/board-wbd111.c133
-rw-r--r--arch/arm/mach-gemini/board-wbd222.c133
-rw-r--r--arch/arm/mach-gemini/common.h33
-rw-r--r--arch/arm/mach-gemini/devices.c118
-rw-r--r--arch/arm/mach-gemini/gpio.c231
-rw-r--r--arch/arm/mach-gemini/idle.c31
-rw-r--r--arch/arm/mach-gemini/include/mach/entry-macro.S33
-rw-r--r--arch/arm/mach-gemini/include/mach/global_reg.h278
-rw-r--r--arch/arm/mach-gemini/include/mach/hardware.h71
-rw-r--r--arch/arm/mach-gemini/include/mach/irqs.h53
-rw-r--r--arch/arm/mach-gemini/include/mach/uncompress.h42
-rw-r--r--arch/arm/mach-gemini/irq.c105
-rw-r--r--arch/arm/mach-gemini/mm.c82
-rw-r--r--arch/arm/mach-gemini/reset.c25
-rw-r--r--arch/arm/mach-gemini/time.c239
-rw-r--r--arch/arm/mach-hisi/platmcpm.c2
-rw-r--r--arch/arm/mach-imx/mach-imx25.c6
-rw-r--r--arch/arm/mach-imx/mach-mx31_3ds.c7
-rw-r--r--arch/arm/mach-imx/mach-mx31moboard.c4
-rw-r--r--arch/arm/mach-imx/mach-pcm037_eet.c4
-rw-r--r--arch/arm/mach-imx/mmdc.c20
-rw-r--r--arch/arm/mach-mxs/mach-mxs.c3
-rw-r--r--arch/arm/mach-omap1/pm.c1
-rw-r--r--arch/arm/mach-omap2/clockdomains81xx_data.c10
-rw-r--r--arch/arm/mach-omap2/cm81xx.h1
-rw-r--r--arch/arm/mach-omap2/devices.c2
-rw-r--r--arch/arm/mach-omap2/omap_hwmod.c208
-rw-r--r--arch/arm/mach-omap2/omap_hwmod.h23
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c1
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_3xxx_data.c4
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_44xx_data.c2
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_54xx_data.c2
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_7xx_data.c5
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_81xx_data.c34
-rw-r--r--arch/arm/mach-omap2/pm.c1
-rw-r--r--arch/arm/mach-stm32/Kconfig26
-rw-r--r--arch/arm/mach-stm32/board-dt.c1
-rw-r--r--arch/arm/mach-sunxi/Kconfig1
67 files changed, 610 insertions, 2660 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4c6816be23a9..4c1a35f15838 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -359,15 +359,6 @@ config ARM_SINGLE_ARMV7M
select SPARSE_IRQ
select USE_OF
-config ARCH_GEMINI
- bool "Cortina Systems Gemini"
- select CLKSRC_MMIO
- select CPU_FA526
- select GENERIC_CLOCKEVENTS
- select GPIOLIB
- help
- Support for the Cortina Systems Gemini family SoCs
-
config ARCH_EBSA110
bool "EBSA-110"
select ARCH_USES_GETTIMEOFFSET
@@ -819,6 +810,8 @@ source "arch/arm/mach-spear/Kconfig"
source "arch/arm/mach-sti/Kconfig"
+source "arch/arm/mach-stm32/Kconfig"
+
source "arch/arm/mach-s3c24xx/Kconfig"
source "arch/arm/mach-s3c64xx/Kconfig"
@@ -877,28 +870,6 @@ config ARCH_LPC18XX
Support for NXP's LPC18xx Cortex-M3 and LPC43xx Cortex-M4
high performance microcontrollers.
-config ARCH_STM32
- bool "STMicrolectronics STM32"
- depends on ARM_SINGLE_ARMV7M
- select ARCH_HAS_RESET_CONTROLLER
- select ARMV7M_SYSTICK
- select CLKSRC_STM32
- select PINCTRL
- select RESET_CONTROLLER
- select STM32_EXTI
- help
- Support for STMicroelectronics STM32 processors.
-
-config MACH_STM32F429
- bool "STMicrolectronics STM32F429"
- depends on ARCH_STM32
- default y
-
-config MACH_STM32F746
- bool "STMicrolectronics STM32F746"
- depends on ARCH_STM32
- default y
-
config ARCH_MPS2
bool "ARM MPS2 platform"
depends on ARM_SINGLE_ARMV7M
diff --git a/arch/arm/include/debug/brcmstb.S b/arch/arm/include/debug/brcmstb.S
index 9113d7b33ae0..52aaed2b936f 100644
--- a/arch/arm/include/debug/brcmstb.S
+++ b/arch/arm/include/debug/brcmstb.S
@@ -22,7 +22,8 @@
#define UARTA_3390 REG_PHYS_ADDR(0x40a900)
#define UARTA_7250 REG_PHYS_ADDR(0x40b400)
-#define UARTA_7268 REG_PHYS_ADDR(0x40c000)
+#define UARTA_7260 REG_PHYS_ADDR(0x40c000)
+#define UARTA_7268 UARTA_7260
#define UARTA_7271 UARTA_7268
#define UARTA_7364 REG_PHYS_ADDR(0x40b000)
#define UARTA_7366 UARTA_7364
@@ -62,13 +63,14 @@
/* Chip specific detection starts here */
20: checkuart(\rp, \rv, 0x33900000, 3390)
21: checkuart(\rp, \rv, 0x72500000, 7250)
-22: checkuart(\rp, \rv, 0x72680000, 7268)
-23: checkuart(\rp, \rv, 0x72710000, 7271)
-24: checkuart(\rp, \rv, 0x73640000, 7364)
-25: checkuart(\rp, \rv, 0x73660000, 7366)
-26: checkuart(\rp, \rv, 0x07437100, 74371)
-27: checkuart(\rp, \rv, 0x74390000, 7439)
-28: checkuart(\rp, \rv, 0x74450000, 7445)
+22: checkuart(\rp, \rv, 0x72600000, 7260)
+23: checkuart(\rp, \rv, 0x72680000, 7268)
+24: checkuart(\rp, \rv, 0x72710000, 7271)
+25: checkuart(\rp, \rv, 0x73640000, 7364)
+26: checkuart(\rp, \rv, 0x73660000, 7366)
+27: checkuart(\rp, \rv, 0x07437100, 74371)
+28: checkuart(\rp, \rv, 0x74390000, 7439)
+29: checkuart(\rp, \rv, 0x74450000, 7445)
/* No valid UART found */
90: mov \rp, #0
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index c5bbf8bb8c0f..cfd8f60a9268 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -1,7 +1,6 @@
#
# Makefile for the linux kernel.
#
-obj-y := soc.o
# CPU-specific support
obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o
@@ -18,3 +17,36 @@ endif
ifeq ($(CONFIG_PM_DEBUG),y)
CFLAGS_pm.o += -DDEBUG
endif
+
+# Default sed regexp - multiline due to syntax constraints
+define sed-y
+ "/^->/{s:->#\(.*\):/* \1 */:; \
+ s:^->\([^ ]*\) [\$$#]*\([-0-9]*\) \(.*\):#define \1 \2 /* \3 */:; \
+ s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \
+ s:->::; p;}"
+endef
+
+# Use filechk to avoid rebuilds when a header changes, but the resulting file
+# does not
+define filechk_offsets
+ (set -e; \
+ echo "#ifndef $2"; \
+ echo "#define $2"; \
+ echo "/*"; \
+ echo " * DO NOT MODIFY."; \
+ echo " *"; \
+ echo " * This file was generated by Kbuild"; \
+ echo " */"; \
+ echo ""; \
+ sed -ne $(sed-y); \
+ echo ""; \
+ echo "#endif" )
+endef
+
+arch/arm/mach-at91/pm_data-offsets.s: arch/arm/mach-at91/pm_data-offsets.c
+ $(call if_changed_dep,cc_s_c)
+
+include/generated/at91_pm_data-offsets.h: arch/arm/mach-at91/pm_data-offsets.s FORCE
+ $(call filechk,offsets,__PM_DATA_OFFSETS_H__)
+
+arch/arm/mach-at91/pm_suspend.o: include/generated/at91_pm_data-offsets.h
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index d068ec3cd1f6..656ad409a253 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -14,23 +14,10 @@
#include <asm/mach/arch.h>
#include "generic.h"
-#include "soc.h"
-
-static const struct at91_soc rm9200_socs[] = {
- AT91_SOC(AT91RM9200_CIDR_MATCH, 0, "at91rm9200 BGA", "at91rm9200"),
- { /* sentinel */ },
-};
static void __init at91rm9200_dt_device_init(void)
{
- struct soc_device *soc;
- struct device *soc_dev = NULL;
-
- soc = at91_soc_init(rm9200_socs);
- if (soc != NULL)
- soc_dev = soc_device_to_device(soc);
-
- of_platform_default_populate(NULL, NULL, soc_dev);
+ of_platform_default_populate(NULL, NULL, NULL);
at91rm9200_pm_init();
}
diff --git a/arch/arm/mach-at91/at91sam9.c b/arch/arm/mach-at91/at91sam9.c
index ba28e9cc584d..3dbdef4d3cbf 100644
--- a/arch/arm/mach-at91/at91sam9.c
+++ b/arch/arm/mach-at91/at91sam9.c
@@ -14,60 +14,12 @@
#include <asm/system_misc.h>
#include "generic.h"
-#include "soc.h"
-static const struct at91_soc at91sam9_socs[] = {
- AT91_SOC(AT91SAM9260_CIDR_MATCH, 0, "at91sam9260", NULL),
- AT91_SOC(AT91SAM9261_CIDR_MATCH, 0, "at91sam9261", NULL),
- AT91_SOC(AT91SAM9263_CIDR_MATCH, 0, "at91sam9263", NULL),
- AT91_SOC(AT91SAM9G20_CIDR_MATCH, 0, "at91sam9g20", NULL),
- AT91_SOC(AT91SAM9RL64_CIDR_MATCH, 0, "at91sam9rl64", NULL),
- AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M11_EXID_MATCH,
- "at91sam9m11", "at91sam9g45"),
- AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M10_EXID_MATCH,
- "at91sam9m10", "at91sam9g45"),
- AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G46_EXID_MATCH,
- "at91sam9g46", "at91sam9g45"),
- AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G45_EXID_MATCH,
- "at91sam9g45", "at91sam9g45"),
- AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G15_EXID_MATCH,
- "at91sam9g15", "at91sam9x5"),
- AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G35_EXID_MATCH,
- "at91sam9g35", "at91sam9x5"),
- AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X35_EXID_MATCH,
- "at91sam9x35", "at91sam9x5"),
- AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G25_EXID_MATCH,
- "at91sam9g25", "at91sam9x5"),
- AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X25_EXID_MATCH,
- "at91sam9x25", "at91sam9x5"),
- AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN12_EXID_MATCH,
- "at91sam9cn12", "at91sam9n12"),
- AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9N12_EXID_MATCH,
- "at91sam9n12", "at91sam9n12"),
- AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN11_EXID_MATCH,
- "at91sam9cn11", "at91sam9n12"),
- AT91_SOC(AT91SAM9XE128_CIDR_MATCH, 0, "at91sam9xe128", "at91sam9xe128"),
- AT91_SOC(AT91SAM9XE256_CIDR_MATCH, 0, "at91sam9xe256", "at91sam9xe256"),
- AT91_SOC(AT91SAM9XE512_CIDR_MATCH, 0, "at91sam9xe512", "at91sam9xe512"),
- { /* sentinel */ },
-};
-
-static void __init at91sam9_common_init(void)
+static void __init at91sam9_init(void)
{
- struct soc_device *soc;
- struct device *soc_dev = NULL;
-
- soc = at91_soc_init(at91sam9_socs);
- if (soc != NULL)
- soc_dev = soc_device_to_device(soc);
+ of_platform_default_populate(NULL, NULL, NULL);
- of_platform_default_populate(NULL, NULL, soc_dev);
-}
-
-static void __init at91sam9_dt_device_init(void)
-{
- at91sam9_common_init();
- at91sam9260_pm_init();
+ at91sam9_pm_init();
}
static const char *const at91_dt_board_compat[] __initconst = {
@@ -77,41 +29,6 @@ static const char *const at91_dt_board_compat[] __initconst = {
DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM9")
/* Maintainer: Atmel */
- .init_machine = at91sam9_dt_device_init,
+ .init_machine = at91sam9_init,
.dt_compat = at91_dt_board_compat,
MACHINE_END
-
-static void __init at91sam9g45_dt_device_init(void)
-{
- at91sam9_common_init();
- at91sam9g45_pm_init();
-}
-
-static const char *const at91sam9g45_board_compat[] __initconst = {
- "atmel,at91sam9g45",
- NULL
-};
-
-DT_MACHINE_START(at91sam9g45_dt, "Atmel AT91SAM9G45")
- /* Maintainer: Atmel */
- .init_machine = at91sam9g45_dt_device_init,
- .dt_compat = at91sam9g45_board_compat,
-MACHINE_END
-
-static void __init at91sam9x5_dt_device_init(void)
-{
- at91sam9_common_init();
- at91sam9x5_pm_init();
-}
-
-static const char *const at91sam9x5_board_compat[] __initconst = {
- "atmel,at91sam9x5",
- "atmel,at91sam9n12",
- NULL
-};
-
-DT_MACHINE_START(at91sam9x5_dt, "Atmel AT91SAM9")
- /* Maintainer: Atmel */
- .init_machine = at91sam9x5_dt_device_init,
- .dt_compat = at91sam9x5_board_compat,
-MACHINE_END
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 28ca57a2060f..f1ead0f13c19 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -13,15 +13,11 @@
#ifdef CONFIG_PM
extern void __init at91rm9200_pm_init(void);
-extern void __init at91sam9260_pm_init(void);
-extern void __init at91sam9g45_pm_init(void);
-extern void __init at91sam9x5_pm_init(void);
+extern void __init at91sam9_pm_init(void);
extern void __init sama5_pm_init(void);
#else
static inline void __init at91rm9200_pm_init(void) { }
-static inline void __init at91sam9260_pm_init(void) { }
-static inline void __init at91sam9g45_pm_init(void) { }
-static inline void __init at91sam9x5_pm_init(void) { }
+static inline void __init at91sam9_pm_init(void) { }
static inline void __init sama5_pm_init(void) { }
#endif
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index a277981f414d..2cd27c830ab6 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -10,35 +10,22 @@
* (at your option) any later version.
*/
-#include <linux/gpio.h>
-#include <linux/suspend.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
#include <linux/genalloc.h>
-#include <linux/interrupt.h>
-#include <linux/sysfs.h>
-#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
#include <linux/of.h>
#include <linux/of_platform.h>
-#include <linux/of_address.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/atmel.h>
-#include <linux/io.h>
+#include <linux/suspend.h>
+
#include <linux/clk/at91_pmc.h>
-#include <asm/irq.h>
-#include <linux/atomic.h>
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-#include <asm/fncpy.h>
#include <asm/cacheflush.h>
+#include <asm/fncpy.h>
#include <asm/system_misc.h>
#include "generic.h"
#include "pm.h"
-static void __iomem *pmc;
-
/*
* FIXME: this is needed to communicate between the pinctrl driver and
* the PM implementation in the machine. Possibly part of the PM
@@ -50,12 +37,13 @@ extern void at91_pinctrl_gpio_suspend(void);
extern void at91_pinctrl_gpio_resume(void);
#endif
-static struct {
- unsigned long uhp_udp_mask;
- int memctrl;
-} at91_pm_data;
+static struct at91_pm_data pm_data;
-static void __iomem *at91_ramc_base[2];
+#define at91_ramc_read(id, field) \
+ __raw_readl(pm_data.ramc[id] + field)
+
+#define at91_ramc_write(id, field, value) \
+ __raw_writel(value, pm_data.ramc[id] + field)
static int at91_pm_valid_state(suspend_state_t state)
{
@@ -91,10 +79,10 @@ static int at91_pm_verify_clocks(void)
unsigned long scsr;
int i;
- scsr = readl(pmc + AT91_PMC_SCSR);
+ scsr = readl(pm_data.pmc + AT91_PMC_SCSR);
/* USB must not be using PLLB */
- if ((scsr & at91_pm_data.uhp_udp_mask) != 0) {
+ if ((scsr & pm_data.uhp_udp_mask) != 0) {
pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
return 0;
}
@@ -105,7 +93,7 @@ static int at91_pm_verify_clocks(void)
if ((scsr & (AT91_PMC_PCK0 << i)) == 0)
continue;
- css = readl(pmc + AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
+ css = readl(pm_data.pmc + AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
if (css != AT91_PMC_CSS_SLOW) {
pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css);
return 0;
@@ -131,25 +119,18 @@ int at91_suspend_entering_slow_clock(void)
}
EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
-static void (*at91_suspend_sram_fn)(void __iomem *pmc, void __iomem *ramc0,
- void __iomem *ramc1, int memctrl);
-
-extern void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *ramc0,
- void __iomem *ramc1, int memctrl);
+static void (*at91_suspend_sram_fn)(struct at91_pm_data *);
+extern void at91_pm_suspend_in_sram(struct at91_pm_data *pm_data);
extern u32 at91_pm_suspend_in_sram_sz;
static void at91_pm_suspend(suspend_state_t state)
{
- unsigned int pm_data = at91_pm_data.memctrl;
-
- pm_data |= (state == PM_SUSPEND_MEM) ?
- AT91_PM_MODE(AT91_PM_SLOW_CLOCK) : 0;
+ pm_data.mode = (state == PM_SUSPEND_MEM) ? AT91_PM_SLOW_CLOCK : 0;
flush_cache_all();
outer_disable();
- at91_suspend_sram_fn(pmc, at91_ramc_base[0],
- at91_ramc_base[1], pm_data);
+ at91_suspend_sram_fn(&pm_data);
outer_resume();
}
@@ -224,12 +205,6 @@ static struct platform_device at91_cpuidle_device = {
.name = "cpuidle-at91",
};
-static void at91_pm_set_standby(void (*at91_standby)(void))
-{
- if (at91_standby)
- at91_cpuidle_device.dev.platform_data = at91_standby;
-}
-
/*
* The AT91RM9200 goes into self-refresh mode with this command, and will
* terminate self-refresh automatically on the next SDRAM access.
@@ -241,20 +216,15 @@ static void at91_pm_set_standby(void (*at91_standby)(void))
*/
static void at91rm9200_standby(void)
{
- u32 lpr = at91_ramc_read(0, AT91_MC_SDRAMC_LPR);
-
asm volatile(
"b 1f\n\t"
".align 5\n\t"
"1: mcr p15, 0, %0, c7, c10, 4\n\t"
- " str %0, [%1, %2]\n\t"
- " str %3, [%1, %4]\n\t"
+ " str %2, [%1, %3]\n\t"
" mcr p15, 0, %0, c7, c0, 4\n\t"
- " str %5, [%1, %2]"
:
- : "r" (0), "r" (at91_ramc_base[0]), "r" (AT91_MC_SDRAMC_LPR),
- "r" (1), "r" (AT91_MC_SDRAMC_SRR),
- "r" (lpr));
+ : "r" (0), "r" (pm_data.ramc[0]),
+ "r" (1), "r" (AT91_MC_SDRAMC_SRR));
}
/* We manage both DDRAM/SDRAM controllers, we need more than one value to
@@ -265,12 +235,27 @@ static void at91_ddr_standby(void)
/* Those two values allow us to delay self-refresh activation
* to the maximum. */
u32 lpr0, lpr1 = 0;
+ u32 mdr, saved_mdr0, saved_mdr1 = 0;
u32 saved_lpr0, saved_lpr1 = 0;
- if (at91_ramc_base[1]) {
+ /* LPDDR1 --> force DDR2 mode during self-refresh */
+ saved_mdr0 = at91_ramc_read(0, AT91_DDRSDRC_MDR);
+ if ((saved_mdr0 & AT91_DDRSDRC_MD) == AT91_DDRSDRC_MD_LOW_POWER_DDR) {
+ mdr = saved_mdr0 & ~AT91_DDRSDRC_MD;
+ mdr |= AT91_DDRSDRC_MD_DDR2;
+ at91_ramc_write(0, AT91_DDRSDRC_MDR, mdr);
+ }
+
+ if (pm_data.ramc[1]) {
saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
+ saved_mdr1 = at91_ramc_read(1, AT91_DDRSDRC_MDR);
+ if ((saved_mdr1 & AT91_DDRSDRC_MD) == AT91_DDRSDRC_MD_LOW_POWER_DDR) {
+ mdr = saved_mdr1 & ~AT91_DDRSDRC_MD;
+ mdr |= AT91_DDRSDRC_MD_DDR2;
+ at91_ramc_write(1, AT91_DDRSDRC_MDR, mdr);
+ }
}
saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
@@ -279,14 +264,17 @@ static void at91_ddr_standby(void)
/* self-refresh mode now */
at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
- if (at91_ramc_base[1])
+ if (pm_data.ramc[1])
at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
cpu_do_idle();
+ at91_ramc_write(0, AT91_DDRSDRC_MDR, saved_mdr0);
at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
- if (at91_ramc_base[1])
+ if (pm_data.ramc[1]) {
+ at91_ramc_write(0, AT91_DDRSDRC_MDR, saved_mdr1);
at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
+ }
}
static void sama5d3_ddr_standby(void)
@@ -313,7 +301,7 @@ static void at91sam9_sdram_standby(void)
u32 lpr0, lpr1 = 0;
u32 saved_lpr0, saved_lpr1 = 0;
- if (at91_ramc_base[1]) {
+ if (pm_data.ramc[1]) {
saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
@@ -325,21 +313,33 @@ static void at91sam9_sdram_standby(void)
/* self-refresh mode now */
at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0);
- if (at91_ramc_base[1])
+ if (pm_data.ramc[1])
at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
cpu_do_idle();
at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0);
- if (at91_ramc_base[1])
+ if (pm_data.ramc[1])
at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
}
+struct ramc_info {
+ void (*idle)(void);
+ unsigned int memctrl;
+};
+
+static const struct ramc_info ramc_infos[] __initconst = {
+ { .idle = at91rm9200_standby, .memctrl = AT91_MEMCTRL_MC},
+ { .idle = at91sam9_sdram_standby, .memctrl = AT91_MEMCTRL_SDRAMC},
+ { .idle = at91_ddr_standby, .memctrl = AT91_MEMCTRL_DDRSDR},
+ { .idle = sama5d3_ddr_standby, .memctrl = AT91_MEMCTRL_DDRSDR},
+};
+
static const struct of_device_id const ramc_ids[] __initconst = {
- { .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby },
- { .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby },
- { .compatible = "atmel,at91sam9g45-ddramc", .data = at91_ddr_standby },
- { .compatible = "atmel,sama5d3-ddramc", .data = sama5d3_ddr_standby },
+ { .compatible = "atmel,at91rm9200-sdramc", .data = &ramc_infos[0] },
+ { .compatible = "atmel,at91sam9260-sdramc", .data = &ramc_infos[1] },
+ { .compatible = "atmel,at91sam9g45-ddramc", .data = &ramc_infos[2] },
+ { .compatible = "atmel,sama5d3-ddramc", .data = &ramc_infos[3] },
{ /*sentinel*/ }
};
@@ -348,15 +348,18 @@ static __init void at91_dt_ramc(void)
struct device_node *np;
const struct of_device_id *of_id;
int idx = 0;
- const void *standby = NULL;
+ void *standby = NULL;
+ const struct ramc_info *ramc;
for_each_matching_node_and_match(np, ramc_ids, &of_id) {
- at91_ramc_base[idx] = of_iomap(np, 0);
- if (!at91_ramc_base[idx])
+ pm_data.ramc[idx] = of_iomap(np, 0);
+ if (!pm_data.ramc[idx])
panic(pr_fmt("unable to map ramc[%d] cpu registers\n"), idx);
+ ramc = of_id->data;
if (!standby)
- standby = of_id->data;
+ standby = ramc->idle;
+ pm_data.memctrl = ramc->memctrl;
idx++;
}
@@ -369,7 +372,7 @@ static __init void at91_dt_ramc(void)
return;
}
- at91_pm_set_standby(standby);
+ at91_cpuidle_device.dev.platform_data = standby;
}
static void at91rm9200_idle(void)
@@ -378,12 +381,12 @@ static void at91rm9200_idle(void)
* Disable the processor clock. The processor will be automatically
* re-enabled by an interrupt or by a reset.
*/
- writel(AT91_PMC_PCK, pmc + AT91_PMC_SCDR);
+ writel(AT91_PMC_PCK, pm_data.pmc + AT91_PMC_SCDR);
}
static void at91sam9_idle(void)
{
- writel(AT91_PMC_PCK, pmc + AT91_PMC_SCDR);
+ writel(AT91_PMC_PCK, pm_data.pmc + AT91_PMC_SCDR);
cpu_do_idle();
}
@@ -433,31 +436,46 @@ static void __init at91_pm_sram_init(void)
&at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz);
}
+struct pmc_info {
+ unsigned long uhp_udp_mask;
+};
+
+static const struct pmc_info pmc_infos[] __initconst = {
+ { .uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP },
+ { .uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP },
+ { .uhp_udp_mask = AT91SAM926x_PMC_UHP },
+};
+
static const struct of_device_id atmel_pmc_ids[] __initconst = {
- { .compatible = "atmel,at91rm9200-pmc" },
- { .compatible = "atmel,at91sam9260-pmc" },
- { .compatible = "atmel,at91sam9g45-pmc" },
- { .compatible = "atmel,at91sam9n12-pmc" },
- { .compatible = "atmel,at91sam9x5-pmc" },
- { .compatible = "atmel,sama5d3-pmc" },
- { .compatible = "atmel,sama5d2-pmc" },
+ { .compatible = "atmel,at91rm9200-pmc", .data = &pmc_infos[0] },
+ { .compatible = "atmel,at91sam9260-pmc", .data = &pmc_infos[1] },
+ { .compatible = "atmel,at91sam9g45-pmc", .data = &pmc_infos[2] },
+ { .compatible = "atmel,at91sam9n12-pmc", .data = &pmc_infos[1] },
+ { .compatible = "atmel,at91sam9x5-pmc", .data = &pmc_infos[1] },
+ { .compatible = "atmel,sama5d3-pmc", .data = &pmc_infos[1] },
+ { .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] },
{ /* sentinel */ },
};
static void __init at91_pm_init(void (*pm_idle)(void))
{
struct device_node *pmc_np;
+ const struct of_device_id *of_id;
+ const struct pmc_info *pmc;
if (at91_cpuidle_device.dev.platform_data)
platform_device_register(&at91_cpuidle_device);
- pmc_np = of_find_matching_node(NULL, atmel_pmc_ids);
- pmc = of_iomap(pmc_np, 0);
- if (!pmc) {
+ pmc_np = of_find_matching_node_and_match(NULL, atmel_pmc_ids, &of_id);
+ pm_data.pmc = of_iomap(pmc_np, 0);
+ if (!pm_data.pmc) {
pr_err("AT91: PM not supported, PMC not found\n");
return;
}
+ pmc = of_id->data;
+ pm_data.uhp_udp_mask = pmc->uhp_udp_mask;
+
if (pm_idle)
arm_pm_idle = pm_idle;
@@ -478,40 +496,17 @@ void __init at91rm9200_pm_init(void)
*/
at91_ramc_write(0, AT91_MC_SDRAMC_LPR, 0);
- at91_pm_data.uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP;
- at91_pm_data.memctrl = AT91_MEMCTRL_MC;
-
at91_pm_init(at91rm9200_idle);
}
-void __init at91sam9260_pm_init(void)
-{
- at91_dt_ramc();
- at91_pm_data.memctrl = AT91_MEMCTRL_SDRAMC;
- at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
- at91_pm_init(at91sam9_idle);
-}
-
-void __init at91sam9g45_pm_init(void)
-{
- at91_dt_ramc();
- at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP;
- at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
- at91_pm_init(at91sam9_idle);
-}
-
-void __init at91sam9x5_pm_init(void)
+void __init at91sam9_pm_init(void)
{
at91_dt_ramc();
- at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
- at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
at91_pm_init(at91sam9_idle);
}
void __init sama5_pm_init(void)
{
at91_dt_ramc();
- at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
- at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
at91_pm_init(NULL);
}
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index bf980c6ef294..fc0f7d048187 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -17,24 +17,20 @@
#include <soc/at91/at91sam9_ddrsdr.h>
#include <soc/at91/at91sam9_sdramc.h>
-#ifndef __ASSEMBLY__
-#define at91_ramc_read(id, field) \
- __raw_readl(at91_ramc_base[id] + field)
-
-#define at91_ramc_write(id, field, value) \
- __raw_writel(value, at91_ramc_base[id] + field)
-#endif
-
#define AT91_MEMCTRL_MC 0
#define AT91_MEMCTRL_SDRAMC 1
#define AT91_MEMCTRL_DDRSDR 2
-#define AT91_PM_MEMTYPE_MASK 0x0f
-
-#define AT91_PM_MODE_OFFSET 4
-#define AT91_PM_MODE_MASK 0x01
-#define AT91_PM_MODE(x) (((x) & AT91_PM_MODE_MASK) << AT91_PM_MODE_OFFSET)
-
#define AT91_PM_SLOW_CLOCK 0x01
+#ifndef __ASSEMBLY__
+struct at91_pm_data {
+ void __iomem *pmc;
+ void __iomem *ramc[2];
+ unsigned long uhp_udp_mask;
+ unsigned int memctrl;
+ unsigned int mode;
+};
+#endif
+
#endif
diff --git a/arch/arm/mach-at91/pm_data-offsets.c b/arch/arm/mach-at91/pm_data-offsets.c
new file mode 100644
index 000000000000..30302cb16df0
--- /dev/null
+++ b/arch/arm/mach-at91/pm_data-offsets.c
@@ -0,0 +1,13 @@
+#include <linux/stddef.h>
+#include <linux/kbuild.h>
+#include "pm.h"
+
+int main(void)
+{
+ DEFINE(PM_DATA_PMC, offsetof(struct at91_pm_data, pmc));
+ DEFINE(PM_DATA_RAMC0, offsetof(struct at91_pm_data, ramc[0]));
+ DEFINE(PM_DATA_RAMC1, offsetof(struct at91_pm_data, ramc[1]));
+ DEFINE(PM_DATA_MEMCTRL, offsetof(struct at91_pm_data, memctrl));
+ DEFINE(PM_DATA_MODE, offsetof(struct at91_pm_data, mode));
+ return 0;
+}
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index a25defda3d22..96781daa671a 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -4,7 +4,7 @@
* Copyright (C) 2006 Savin Zlobec
*
* AT91SAM9 support:
- * Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
+ * Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -14,6 +14,7 @@
#include <linux/linkage.h>
#include <linux/clk/at91_pmc.h>
#include "pm.h"
+#include "generated/at91_pm_data-offsets.h"
#define SRAMC_SELF_FRESH_ACTIVE 0x01
#define SRAMC_SELF_FRESH_EXIT 0x00
@@ -72,13 +73,9 @@ tmp2 .req r5
.arm
/*
- * void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *sdramc,
- * void __iomem *ramc1, int memctrl)
+ * void at91_suspend_sram_fn(struct at91_pm_data*)
* @input param:
- * @r0: base address of AT91_PMC
- * @r1: base address of SDRAM Controller (SDRAM, DDRSDR, or AT91_SYS)
- * @r2: base address of second SDRAM Controller or 0 if not present
- * @r3: pm information
+ * @r0: base address of struct at91_pm_data
*/
/* at91_pm_suspend_in_sram must be 8-byte aligned per the requirements of fncpy() */
.align 3
@@ -90,16 +87,16 @@ ENTRY(at91_pm_suspend_in_sram)
mov tmp1, #0
mcr p15, 0, tmp1, c7, c10, 4
- str r0, .pmc_base
- str r1, .sramc_base
- str r2, .sramc1_base
-
- and r0, r3, #AT91_PM_MEMTYPE_MASK
- str r0, .memtype
-
- lsr r0, r3, #AT91_PM_MODE_OFFSET
- and r0, r0, #AT91_PM_MODE_MASK
- str r0, .pm_mode
+ ldr tmp1, [r0, #PM_DATA_PMC]
+ str tmp1, .pmc_base
+ ldr tmp1, [r0, #PM_DATA_RAMC0]
+ str tmp1, .sramc_base
+ ldr tmp1, [r0, #PM_DATA_RAMC1]
+ str tmp1, .sramc1_base
+ ldr tmp1, [r0, #PM_DATA_MEMCTRL]
+ str tmp1, .memtype
+ ldr tmp1, [r0, #PM_DATA_MODE]
+ str tmp1, .pm_mode
/* Active the self-refresh mode */
mov r0, #SRAMC_SELF_FRESH_ACTIVE
diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c
index b272c45b400f..6d157d0ead8e 100644
--- a/arch/arm/mach-at91/sama5.c
+++ b/arch/arm/mach-at91/sama5.c
@@ -15,60 +15,10 @@
#include <asm/system_misc.h>
#include "generic.h"
-#include "soc.h"
-
-static const struct at91_soc sama5_socs[] = {
- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D21CU_EXID_MATCH,
- "sama5d21", "sama5d2"),
- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D22CU_EXID_MATCH,
- "sama5d22", "sama5d2"),
- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D23CU_EXID_MATCH,
- "sama5d23", "sama5d2"),
- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D24CX_EXID_MATCH,
- "sama5d24", "sama5d2"),
- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D24CU_EXID_MATCH,
- "sama5d24", "sama5d2"),
- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D26CU_EXID_MATCH,
- "sama5d26", "sama5d2"),
- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27CU_EXID_MATCH,
- "sama5d27", "sama5d2"),
- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27CN_EXID_MATCH,
- "sama5d27", "sama5d2"),
- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28CU_EXID_MATCH,
- "sama5d28", "sama5d2"),
- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28CN_EXID_MATCH,
- "sama5d28", "sama5d2"),
- AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D31_EXID_MATCH,
- "sama5d31", "sama5d3"),
- AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D33_EXID_MATCH,
- "sama5d33", "sama5d3"),
- AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D34_EXID_MATCH,
- "sama5d34", "sama5d3"),
- AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D35_EXID_MATCH,
- "sama5d35", "sama5d3"),
- AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D36_EXID_MATCH,
- "sama5d36", "sama5d3"),
- AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D41_EXID_MATCH,
- "sama5d41", "sama5d4"),
- AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D42_EXID_MATCH,
- "sama5d42", "sama5d4"),
- AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D43_EXID_MATCH,
- "sama5d43", "sama5d4"),
- AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D44_EXID_MATCH,
- "sama5d44", "sama5d4"),
- { /* sentinel */ },
-};
static void __init sama5_dt_device_init(void)
{
- struct soc_device *soc;
- struct device *soc_dev = NULL;
-
- soc = at91_soc_init(sama5_socs);
- if (soc != NULL)
- soc_dev = soc_device_to_device(soc);
-
- of_platform_default_populate(NULL, NULL, soc_dev);
+ of_platform_default_populate(NULL, NULL, NULL);
sama5_pm_init();
}
diff --git a/arch/arm/mach-at91/soc.c b/arch/arm/mach-at91/soc.c
deleted file mode 100644
index c6fda75ddb89..000000000000
--- a/arch/arm/mach-at91/soc.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * Copyright (C) 2015 Atmel
- *
- * Alexandre Belloni <alexandre.belloni@free-electrons.com
- * Boris Brezillon <boris.brezillon@free-electrons.com
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- */
-
-#define pr_fmt(fmt) "AT91: " fmt
-
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
-#include <linux/slab.h>
-#include <linux/sys_soc.h>
-
-#include "soc.h"
-
-#define AT91_DBGU_CIDR 0x40
-#define AT91_DBGU_EXID 0x44
-#define AT91_CHIPID_CIDR 0x00
-#define AT91_CHIPID_EXID 0x04
-#define AT91_CIDR_VERSION(x) ((x) & 0x1f)
-#define AT91_CIDR_EXT BIT(31)
-#define AT91_CIDR_MATCH_MASK 0x7fffffe0
-
-static int __init at91_get_cidr_exid_from_dbgu(u32 *cidr, u32 *exid)
-{
- struct device_node *np;
- void __iomem *regs;
-
- np = of_find_compatible_node(NULL, NULL, "atmel,at91rm9200-dbgu");
- if (!np)
- np = of_find_compatible_node(NULL, NULL,
- "atmel,at91sam9260-dbgu");
- if (!np)
- return -ENODEV;
-
- regs = of_iomap(np, 0);
- of_node_put(np);
-
- if (!regs) {
- pr_warn("Could not map DBGU iomem range");
- return -ENXIO;
- }
-
- *cidr = readl(regs + AT91_DBGU_CIDR);
- *exid = readl(regs + AT91_DBGU_EXID);
-
- iounmap(regs);
-
- return 0;
-}
-
-static int __init at91_get_cidr_exid_from_chipid(u32 *cidr, u32 *exid)
-{
- struct device_node *np;
- void __iomem *regs;
-
- np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-chipid");
- if (!np)
- return -ENODEV;
-
- regs = of_iomap(np, 0);
- of_node_put(np);
-
- if (!regs) {
- pr_warn("Could not map DBGU iomem range");
- return -ENXIO;
- }
-
- *cidr = readl(regs + AT91_CHIPID_CIDR);
- *exid = readl(regs + AT91_CHIPID_EXID);
-
- iounmap(regs);
-
- return 0;
-}
-
-struct soc_device * __init at91_soc_init(const struct at91_soc *socs)
-{
- struct soc_device_attribute *soc_dev_attr;
- const struct at91_soc *soc;
- struct soc_device *soc_dev;
- u32 cidr, exid;
- int ret;
-
- /*
- * With SAMA5D2 and later SoCs, CIDR and EXID registers are no more
- * in the dbgu device but in the chipid device whose purpose is only
- * to expose these two registers.
- */
- ret = at91_get_cidr_exid_from_dbgu(&cidr, &exid);
- if (ret)
- ret = at91_get_cidr_exid_from_chipid(&cidr, &exid);
- if (ret) {
- if (ret == -ENODEV)
- pr_warn("Could not find identification node");
- return NULL;
- }
-
- for (soc = socs; soc->name; soc++) {
- if (soc->cidr_match != (cidr & AT91_CIDR_MATCH_MASK))
- continue;
-
- if (!(cidr & AT91_CIDR_EXT) || soc->exid_match == exid)
- break;
- }
-
- if (!soc->name) {
- pr_warn("Could not find matching SoC description\n");
- return NULL;
- }
-
- soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
- if (!soc_dev_attr)
- return NULL;
-
- soc_dev_attr->family = soc->family;
- soc_dev_attr->soc_id = soc->name;
- soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%X",
- AT91_CIDR_VERSION(cidr));
- soc_dev = soc_device_register(soc_dev_attr);
- if (IS_ERR(soc_dev)) {
- kfree(soc_dev_attr->revision);
- kfree(soc_dev_attr);
- pr_warn("Could not register SoC device\n");
- return NULL;
- }
-
- if (soc->family)
- pr_info("Detected SoC family: %s\n", soc->family);
- pr_info("Detected SoC: %s, revision %X\n", soc->name,
- AT91_CIDR_VERSION(cidr));
-
- return soc_dev;
-}
diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h
deleted file mode 100644
index 228efded5085..000000000000
--- a/arch/arm/mach-at91/soc.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Copyright (C) 2015 Atmel
- *
- * Boris Brezillon <boris.brezillon@free-electrons.com
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- */
-
-#ifndef __AT91_SOC_H
-#define __AT91_SOC_H
-
-#include <linux/sys_soc.h>
-
-struct at91_soc {
- u32 cidr_match;
- u32 exid_match;
- const char *name;
- const char *family;
-};
-
-#define AT91_SOC(__cidr, __exid, __name, __family) \
- { \
- .cidr_match = (__cidr), \
- .exid_match = (__exid), \
- .name = (__name), \
- .family = (__family), \
- }
-
-struct soc_device * __init
-at91_soc_init(const struct at91_soc *socs);
-
-#define AT91RM9200_CIDR_MATCH 0x09290780
-
-#define AT91SAM9260_CIDR_MATCH 0x019803a0
-#define AT91SAM9261_CIDR_MATCH 0x019703a0
-#define AT91SAM9263_CIDR_MATCH 0x019607a0
-#define AT91SAM9G20_CIDR_MATCH 0x019905a0
-#define AT91SAM9RL64_CIDR_MATCH 0x019b03a0
-#define AT91SAM9G45_CIDR_MATCH 0x019b05a0
-#define AT91SAM9X5_CIDR_MATCH 0x019a05a0
-#define AT91SAM9N12_CIDR_MATCH 0x019a07a0
-
-#define AT91SAM9M11_EXID_MATCH 0x00000001
-#define AT91SAM9M10_EXID_MATCH 0x00000002
-#define AT91SAM9G46_EXID_MATCH 0x00000003
-#define AT91SAM9G45_EXID_MATCH 0x00000004
-
-#define AT91SAM9G15_EXID_MATCH 0x00000000
-#define AT91SAM9G35_EXID_MATCH 0x00000001
-#define AT91SAM9X35_EXID_MATCH 0x00000002
-#define AT91SAM9G25_EXID_MATCH 0x00000003
-#define AT91SAM9X25_EXID_MATCH 0x00000004
-
-#define AT91SAM9CN12_EXID_MATCH 0x00000005
-#define AT91SAM9N12_EXID_MATCH 0x00000006
-#define AT91SAM9CN11_EXID_MATCH 0x00000009
-
-#define AT91SAM9XE128_CIDR_MATCH 0x329973a0
-#define AT91SAM9XE256_CIDR_MATCH 0x329a93a0
-#define AT91SAM9XE512_CIDR_MATCH 0x329aa3a0
-
-#define SAMA5D2_CIDR_MATCH 0x0a5c08c0
-#define SAMA5D21CU_EXID_MATCH 0x0000005a
-#define SAMA5D22CU_EXID_MATCH 0x00000059
-#define SAMA5D22CN_EXID_MATCH 0x00000069
-#define SAMA5D23CU_EXID_MATCH 0x00000058
-#define SAMA5D24CX_EXID_MATCH 0x00000004
-#define SAMA5D24CU_EXID_MATCH 0x00000014
-#define SAMA5D26CU_EXID_MATCH 0x00000012
-#define SAMA5D27CU_EXID_MATCH 0x00000011
-#define SAMA5D27CN_EXID_MATCH 0x00000021
-#define SAMA5D28CU_EXID_MATCH 0x00000010
-#define SAMA5D28CN_EXID_MATCH 0x00000020
-
-#define SAMA5D3_CIDR_MATCH 0x0a5c07c0
-#define SAMA5D31_EXID_MATCH 0x00444300
-#define SAMA5D33_EXID_MATCH 0x00414300
-#define SAMA5D34_EXID_MATCH 0x00414301
-#define SAMA5D35_EXID_MATCH 0x00584300
-#define SAMA5D36_EXID_MATCH 0x00004301
-
-#define SAMA5D4_CIDR_MATCH 0x0a5c07c0
-#define SAMA5D41_EXID_MATCH 0x00000001
-#define SAMA5D42_EXID_MATCH 0x00000002
-#define SAMA5D43_EXID_MATCH 0x00000003
-#define SAMA5D44_EXID_MATCH 0x00000004
-
-#endif /* __AT91_SOC_H */
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index a0e66d8200c5..f9389c5910e7 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -198,7 +198,9 @@ config ARCH_BRCMSTB
select HAVE_ARM_ARCH_TIMER
select BRCMSTB_L2_IRQ
select BCM7120_L2_IRQ
+ select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
+ select ZONE_DMA if ARM_LPAE
select SOC_BRCMSTB
select SOC_BUS
help
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 6f1e1299cab9..b5625d009288 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -828,6 +828,9 @@ static struct regulator_consumer_supply fixed_supplies[] = {
/* Baseboard 1.8V: 5V -> TPS73701DCQ -> 1.8V */
REGULATOR_SUPPLY("DVDD", "1-0018"),
+
+ /* UI card 3.3V: 5V -> TPS73701DCQ -> 3.3V */
+ REGULATOR_SUPPLY("vcc", "1-0020"),
};
/* TPS65070 voltage regulator support */
@@ -1213,6 +1216,7 @@ static struct vpif_subdev_info da850_vpif_capture_sdev_info[] = {
static struct vpif_capture_config da850_vpif_capture_config = {
.subdev_info = da850_vpif_capture_sdev_info,
.subdev_count = ARRAY_SIZE(da850_vpif_capture_sdev_info),
+ .i2c_adapter_id = 1,
.chan_config[0] = {
.inputs = da850_ch0_inputs,
.input_count = ARRAY_SIZE(da850_ch0_inputs),
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 023480b75244..20f1874a5657 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -744,7 +744,8 @@ static int davinci_phy_fixup(struct phy_device *phydev)
return 0;
}
-#define HAS_ATA IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710)
+#define HAS_ATA (IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
+ IS_ENABLED(CONFIG_PATA_BK3710))
#define HAS_NOR IS_ENABLED(CONFIG_MTD_PHYSMAP)
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index f702d4fc8eb8..cb176826d1cb 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -119,7 +119,8 @@ static struct platform_device davinci_nand_device = {
},
};
-#define HAS_ATA IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710)
+#define HAS_ATA (IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
+ IS_ENABLED(CONFIG_PATA_BK3710))
#ifdef CONFIG_I2C
/* CPLD Register 0 bits to control ATA */
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 0a7838852649..0c02aaad0539 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -163,7 +163,8 @@ static struct davinci_mmc_config davinci_ntosd2_mmc_config = {
.wires = 4,
};
-#define HAS_ATA IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710)
+#define HAS_ATA (IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
+ IS_ENABLED(CONFIG_PATA_BK3710))
#define HAS_NAND IS_ENABLED(CONFIG_MTD_NAND_DAVINCI)
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index 073c458d0c67..bd88470f3e5c 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -304,6 +304,11 @@ static struct clk usb20_clk = {
.gpsc = 1,
};
+static struct clk cppi41_clk = {
+ .name = "cppi41",
+ .parent = &usb20_clk,
+};
+
static struct clk aemif_clk = {
.name = "aemif",
.parent = &pll0_sysclk3,
@@ -413,6 +418,7 @@ static struct clk_lookup da830_clks[] = {
CLK("davinci-mcasp.1", NULL, &mcasp1_clk),
CLK("davinci-mcasp.2", NULL, &mcasp2_clk),
CLK("musb-da8xx", "usb20", &usb20_clk),
+ CLK("cppi41-dmaengine", NULL, &cppi41_clk),
CLK(NULL, "aemif", &aemif_clk),
CLK(NULL, "aintc", &aintc_clk),
CLK(NULL, "secu_mgr", &secu_mgr_clk),
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index ccad2f99dfc9..07d6f0eb8c82 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -401,6 +401,11 @@ static struct clk usb20_clk = {
.gpsc = 1,
};
+static struct clk cppi41_clk = {
+ .name = "cppi41",
+ .parent = &usb20_clk,
+};
+
static struct clk spi0_clk = {
.name = "spi0",
.parent = &pll0_sysclk2,
@@ -560,6 +565,7 @@ static struct clk_lookup da850_clks[] = {
CLK("davinci-nand.0", "aemif", &aemif_nand_clk),
CLK("ohci-da8xx", "usb11", &usb11_clk),
CLK("musb-da8xx", "usb20", &usb20_clk),
+ CLK("cppi41-dmaengine", NULL, &cppi41_clk),
CLK("spi_davinci.0", NULL, &spi0_clk),
CLK("spi_davinci.1", NULL, &spi1_clk),
CLK("vpif", NULL, &vpif_clk),
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index e3cef503cd8f..5699ce39e64f 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -53,6 +53,7 @@ static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("ti,da830-musb", 0x01e00000, "musb-da8xx", NULL),
OF_DEV_AUXDATA("ti,da830-usb-phy", 0x01c1417c, "da8xx-usb-phy", NULL),
OF_DEV_AUXDATA("ti,da850-ahci", 0x01e18000, "ahci_da850", NULL),
+ OF_DEV_AUXDATA("ti,da850-vpif", 0x01e17000, "vpif", NULL),
{}
};
diff --git a/arch/arm/mach-davinci/pdata-quirks.c b/arch/arm/mach-davinci/pdata-quirks.c
index 5b57da475065..329f5402ad1d 100644
--- a/arch/arm/mach-davinci/pdata-quirks.c
+++ b/arch/arm/mach-davinci/pdata-quirks.c
@@ -10,26 +10,202 @@
#include <linux/kernel.h>
#include <linux/of_platform.h>
+#include <media/i2c/tvp514x.h>
+#include <media/i2c/adv7343.h>
+
#include <mach/common.h>
+#include <mach/da8xx.h>
struct pdata_init {
const char *compatible;
void (*fn)(void);
};
+#define TVP5147_CH0 "tvp514x-0"
+#define TVP5147_CH1 "tvp514x-1"
+
+/* VPIF capture configuration */
+static struct tvp514x_platform_data tvp5146_pdata = {
+ .clk_polarity = 0,
+ .hs_polarity = 1,
+ .vs_polarity = 1,
+};
+
+#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
+
+static const struct vpif_input da850_ch0_inputs[] = {
+ {
+ .input = {
+ .index = 0,
+ .name = "Composite",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .capabilities = V4L2_IN_CAP_STD,
+ .std = TVP514X_STD_ALL,
+ },
+ .input_route = INPUT_CVBS_VI2B,
+ .output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+ .subdev_name = TVP5147_CH0,
+ },
+};
+
+static const struct vpif_input da850_ch1_inputs[] = {
+ {
+ .input = {
+ .index = 0,
+ .name = "S-Video",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .capabilities = V4L2_IN_CAP_STD,
+ .std = TVP514X_STD_ALL,
+ },
+ .input_route = INPUT_SVIDEO_VI2C_VI1C,
+ .output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+ .subdev_name = TVP5147_CH1,
+ },
+};
+
+static struct vpif_subdev_info da850_vpif_capture_sdev_info[] = {
+ {
+ .name = TVP5147_CH0,
+ .board_info = {
+ I2C_BOARD_INFO("tvp5146", 0x5d),
+ .platform_data = &tvp5146_pdata,
+ },
+ },
+ {
+ .name = TVP5147_CH1,
+ .board_info = {
+ I2C_BOARD_INFO("tvp5146", 0x5c),
+ .platform_data = &tvp5146_pdata,
+ },
+ },
+};
+
+static struct vpif_capture_config da850_vpif_capture_config = {
+ .subdev_info = da850_vpif_capture_sdev_info,
+ .subdev_count = ARRAY_SIZE(da850_vpif_capture_sdev_info),
+ .chan_config[0] = {
+ .inputs = da850_ch0_inputs,
+ .input_count = ARRAY_SIZE(da850_ch0_inputs),
+ .vpif_if = {
+ .if_type = VPIF_IF_BT656,
+ .hd_pol = 1,
+ .vd_pol = 1,
+ .fid_pol = 0,
+ },
+ },
+ .chan_config[1] = {
+ .inputs = da850_ch1_inputs,
+ .input_count = ARRAY_SIZE(da850_ch1_inputs),
+ .vpif_if = {
+ .if_type = VPIF_IF_BT656,
+ .hd_pol = 1,
+ .vd_pol = 1,
+ .fid_pol = 0,
+ },
+ },
+ .card_name = "DA850/OMAP-L138 Video Capture",
+};
+
+static void __init da850_vpif_legacy_register_capture(void)
+{
+ int ret;
+
+ ret = da850_register_vpif_capture(&da850_vpif_capture_config);
+ if (ret)
+ pr_warn("%s: VPIF capture setup failed: %d\n",
+ __func__, ret);
+}
+
+static void __init da850_vpif_capture_legacy_init_lcdk(void)
+{
+ da850_vpif_capture_config.subdev_count = 1;
+ da850_vpif_legacy_register_capture();
+}
+
+static void __init da850_vpif_capture_legacy_init_evm(void)
+{
+ da850_vpif_legacy_register_capture();
+}
+
+static struct adv7343_platform_data adv7343_pdata = {
+ .mode_config = {
+ .dac = { 1, 1, 1 },
+ },
+ .sd_config = {
+ .sd_dac_out = { 1 },
+ },
+};
+
+static struct vpif_subdev_info da850_vpif_subdev[] = {
+ {
+ .name = "adv7343",
+ .board_info = {
+ I2C_BOARD_INFO("adv7343", 0x2a),
+ .platform_data = &adv7343_pdata,
+ },
+ },
+};
+
+static const struct vpif_output da850_ch0_outputs[] = {
+ {
+ .output = {
+ .index = 0,
+ .name = "Composite",
+ .type = V4L2_OUTPUT_TYPE_ANALOG,
+ .capabilities = V4L2_OUT_CAP_STD,
+ .std = V4L2_STD_ALL,
+ },
+ .subdev_name = "adv7343",
+ .output_route = ADV7343_COMPOSITE_ID,
+ },
+ {
+ .output = {
+ .index = 1,
+ .name = "S-Video",
+ .type = V4L2_OUTPUT_TYPE_ANALOG,
+ .capabilities = V4L2_OUT_CAP_STD,
+ .std = V4L2_STD_ALL,
+ },
+ .subdev_name = "adv7343",
+ .output_route = ADV7343_SVIDEO_ID,
+ },
+};
+
+static struct vpif_display_config da850_vpif_display_config = {
+ .subdevinfo = da850_vpif_subdev,
+ .subdev_count = ARRAY_SIZE(da850_vpif_subdev),
+ .chan_config[0] = {
+ .outputs = da850_ch0_outputs,
+ .output_count = ARRAY_SIZE(da850_ch0_outputs),
+ },
+ .card_name = "DA850/OMAP-L138 Video Display",
+};
+
+static void __init da850_vpif_display_legacy_init_evm(void)
+{
+ int ret;
+
+ ret = da850_register_vpif_display(&da850_vpif_display_config);
+ if (ret)
+ pr_warn("%s: VPIF display setup failed: %d\n",
+ __func__, ret);
+}
+
static void pdata_quirks_check(struct pdata_init *quirks)
{
while (quirks->compatible) {
if (of_machine_is_compatible(quirks->compatible)) {
if (quirks->fn)
quirks->fn();
- break;
}
quirks++;
}
}
static struct pdata_init pdata_quirks[] __initdata = {
+ { "ti,da850-lcdk", da850_vpif_capture_legacy_init_lcdk, },
+ { "ti,da850-evm", da850_vpif_display_legacy_init_evm, },
+ { "ti,da850-evm", da850_vpif_capture_legacy_init_evm, },
{ /* sentinel */ },
};
diff --git a/arch/arm/mach-davinci/pm.c b/arch/arm/mach-davinci/pm.c
index 0afd201ab980..efb80354f303 100644
--- a/arch/arm/mach-davinci/pm.c
+++ b/arch/arm/mach-davinci/pm.c
@@ -108,7 +108,6 @@ static int davinci_pm_enter(suspend_state_t state)
int ret = 0;
switch (state) {
- case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
davinci_pm_suspend();
break;
diff --git a/arch/arm/mach-gemini/Kconfig b/arch/arm/mach-gemini/Kconfig
index 6f066ee4bf24..06c8b095154c 100644
--- a/arch/arm/mach-gemini/Kconfig
+++ b/arch/arm/mach-gemini/Kconfig
@@ -1,40 +1,13 @@
-if ARCH_GEMINI
-
-menu "Cortina Systems Gemini Implementations"
-
-config MACH_NAS4220B
- bool "Raidsonic NAS-4220-B"
- select GEMINI_MEM_SWAP
- help
- Say Y here if you intend to run this kernel on a
- Raidsonic NAS-4220-B.
-
-config MACH_RUT100
- bool "Teltonika RUT100"
- select GEMINI_MEM_SWAP
- help
- Say Y here if you intend to run this kernel on a
- Teltonika 3G Router RUT100.
-
-config MACH_WBD111
- bool "Wiliboard WBD-111"
- select GEMINI_MEM_SWAP
- help
- Say Y here if you intend to run this kernel on a
- Wiliboard WBD-111.
-
-config MACH_WBD222
- bool "Wiliboard WBD-222"
- select GEMINI_MEM_SWAP
- help
- Say Y here if you intend to run this kernel on a
- Wiliboard WBD-222.
-
-endmenu
-
-config GEMINI_MEM_SWAP
- bool "Gemini memory is swapped"
- help
- Say Y here if Gemini memory is swapped by bootloader.
-
-endif
+menuconfig ARCH_GEMINI
+ bool "Cortina Systems Gemini"
+ depends on ARCH_MULTI_V4
+ select ARM_APPENDED_DTB # Old Redboot bootloaders deployed
+ select FARADAY_FTINTC010
+ select FTTMR010_TIMER
+ select GPIO_FTGPIO010
+ select GPIOLIB
+ select POWER_RESET
+ select POWER_RESET_GEMINI_POWEROFF
+ select POWER_RESET_SYSCON
+ help
+ Support for the Cortina Systems Gemini family SoCs
diff --git a/arch/arm/mach-gemini/Makefile b/arch/arm/mach-gemini/Makefile
index 7963a77be637..ca0db5477180 100644
--- a/arch/arm/mach-gemini/Makefile
+++ b/arch/arm/mach-gemini/Makefile
@@ -1,13 +1,2 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y := irq.o mm.o time.o devices.o gpio.o idle.o reset.o
-
-# Board-specific support
-obj-$(CONFIG_MACH_NAS4220B) += board-nas4220b.o
-obj-$(CONFIG_MACH_RUT100) += board-rut1xx.o
-obj-$(CONFIG_MACH_WBD111) += board-wbd111.o
-obj-$(CONFIG_MACH_WBD222) += board-wbd222.o
+# Makefile for Cortina systems Gemini
+obj-y := board-dt.o
diff --git a/arch/arm/mach-gemini/Makefile.boot b/arch/arm/mach-gemini/Makefile.boot
deleted file mode 100644
index 683f52b20e3d..000000000000
--- a/arch/arm/mach-gemini/Makefile.boot
+++ /dev/null
@@ -1,9 +0,0 @@
-ifeq ($(CONFIG_GEMINI_MEM_SWAP),y)
- zreladdr-y += 0x00008000
-params_phys-y := 0x00000100
-initrd_phys-y := 0x00800000
-else
- zreladdr-y += 0x10008000
-params_phys-y := 0x10000100
-initrd_phys-y := 0x10800000
-endif
diff --git a/arch/arm/mach-gemini/board-dt.c b/arch/arm/mach-gemini/board-dt.c
new file mode 100644
index 000000000000..c0c0ebdd551e
--- /dev/null
+++ b/arch/arm/mach-gemini/board-dt.c
@@ -0,0 +1,62 @@
+/*
+ * Gemini Device Tree boot support
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/system_misc.h>
+#include <asm/proc-fns.h>
+
+#ifdef CONFIG_DEBUG_GEMINI
+/* This is needed for LL-debug/earlyprintk/debug-macro.S */
+static struct map_desc gemini_io_desc[] __initdata = {
+ {
+ .virtual = CONFIG_DEBUG_UART_VIRT,
+ .pfn = __phys_to_pfn(CONFIG_DEBUG_UART_PHYS),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init gemini_map_io(void)
+{
+ iotable_init(gemini_io_desc, ARRAY_SIZE(gemini_io_desc));
+}
+#else
+#define gemini_map_io NULL
+#endif
+
+static void gemini_idle(void)
+{
+ /*
+ * Because of broken hardware we have to enable interrupts or the CPU
+ * will never wakeup... Acctualy it is not very good to enable
+ * interrupts first since scheduler can miss a tick, but there is
+ * no other way around this. Platforms that needs it for power saving
+ * should enable it in init code, since by default it is
+ * disabled.
+ */
+
+ /* FIXME: Enabling interrupts here is racy! */
+ local_irq_enable();
+ cpu_do_idle();
+}
+
+static void __init gemini_init_machine(void)
+{
+ arm_pm_idle = gemini_idle;
+}
+
+static const char *gemini_board_compat[] = {
+ "cortina,gemini",
+ NULL,
+};
+
+DT_MACHINE_START(GEMINI_DT, "Gemini (Device Tree)")
+ .map_io = gemini_map_io,
+ .init_machine = gemini_init_machine,
+ .dt_compat = gemini_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-gemini/board-nas4220b.c b/arch/arm/mach-gemini/board-nas4220b.c
deleted file mode 100644
index 18b12796acf9..000000000000
--- a/arch/arm/mach-gemini/board-nas4220b.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * Support for Raidsonic NAS-4220-B
- *
- * Copyright (C) 2009 Janos Laube <janos.dev@gmail.com>
- *
- * based on rut1xx.c
- * Copyright (C) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/io.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/hardware.h>
-#include <mach/global_reg.h>
-
-#include "common.h"
-
-static struct gpio_led ib4220b_leds[] = {
- {
- .name = "nas4220b:orange:hdd",
- .default_trigger = "none",
- .gpio = 60,
- },
- {
- .name = "nas4220b:green:os",
- .default_trigger = "heartbeat",
- .gpio = 62,
- },
-};
-
-static struct gpio_led_platform_data ib4220b_leds_data = {
- .num_leds = ARRAY_SIZE(ib4220b_leds),
- .leds = ib4220b_leds,
-};
-
-static struct platform_device ib4220b_led_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &ib4220b_leds_data,
- },
-};
-
-static struct gpio_keys_button ib4220b_keys[] = {
- {
- .code = KEY_SETUP,
- .gpio = 61,
- .active_low = 1,
- .desc = "Backup Button",
- .type = EV_KEY,
- },
- {
- .code = KEY_RESTART,
- .gpio = 63,
- .active_low = 1,
- .desc = "Softreset Button",
- .type = EV_KEY,
- },
-};
-
-static struct gpio_keys_platform_data ib4220b_keys_data = {
- .buttons = ib4220b_keys,
- .nbuttons = ARRAY_SIZE(ib4220b_keys),
-};
-
-static struct platform_device ib4220b_key_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &ib4220b_keys_data,
- },
-};
-
-static void __init ib4220b_init(void)
-{
- gemini_gpio_init();
- platform_register_uart();
- platform_register_pflash(SZ_16M, NULL, 0);
- platform_device_register(&ib4220b_led_device);
- platform_device_register(&ib4220b_key_device);
- platform_register_rtc();
-}
-
-MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B")
- .atag_offset = 0x100,
- .map_io = gemini_map_io,
- .init_irq = gemini_init_irq,
- .init_time = gemini_timer_init,
- .init_machine = ib4220b_init,
- .restart = gemini_restart,
-MACHINE_END
diff --git a/arch/arm/mach-gemini/board-rut1xx.c b/arch/arm/mach-gemini/board-rut1xx.c
deleted file mode 100644
index 7a675f88ffd6..000000000000
--- a/arch/arm/mach-gemini/board-rut1xx.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Support for Teltonika RUT1xx
- *
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/sizes.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-
-static struct gpio_keys_button rut1xx_keys[] = {
- {
- .code = KEY_SETUP,
- .gpio = 60,
- .active_low = 1,
- .desc = "Reset to defaults",
- .type = EV_KEY,
- },
-};
-
-static struct gpio_keys_platform_data rut1xx_keys_data = {
- .buttons = rut1xx_keys,
- .nbuttons = ARRAY_SIZE(rut1xx_keys),
-};
-
-static struct platform_device rut1xx_keys_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &rut1xx_keys_data,
- },
-};
-
-static struct gpio_led rut100_leds[] = {
- {
- .name = "Power",
- .default_trigger = "heartbeat",
- .gpio = 17,
- },
- {
- .name = "GSM",
- .default_trigger = "default-on",
- .gpio = 7,
- .active_low = 1,
- },
-};
-
-static struct gpio_led_platform_data rut100_leds_data = {
- .num_leds = ARRAY_SIZE(rut100_leds),
- .leds = rut100_leds,
-};
-
-static struct platform_device rut1xx_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &rut100_leds_data,
- },
-};
-
-static void __init rut1xx_init(void)
-{
- gemini_gpio_init();
- platform_register_uart();
- platform_register_pflash(SZ_8M, NULL, 0);
- platform_device_register(&rut1xx_leds);
- platform_device_register(&rut1xx_keys_device);
- platform_register_rtc();
-}
-
-MACHINE_START(RUT100, "Teltonika RUT100")
- .atag_offset = 0x100,
- .map_io = gemini_map_io,
- .init_irq = gemini_init_irq,
- .init_time = gemini_timer_init,
- .init_machine = rut1xx_init,
- .restart = gemini_restart,
-MACHINE_END
diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c
deleted file mode 100644
index 14c56f3f0ec2..000000000000
--- a/arch/arm/mach-gemini/board-wbd111.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Support for Wiliboard WBD-111
- *
- * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/skbuff.h>
-#include <linux/gpio_keys.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-
-#include "common.h"
-
-static struct gpio_keys_button wbd111_keys[] = {
- {
- .code = KEY_SETUP,
- .gpio = 5,
- .active_low = 1,
- .desc = "reset",
- .type = EV_KEY,
- },
-};
-
-static struct gpio_keys_platform_data wbd111_keys_data = {
- .buttons = wbd111_keys,
- .nbuttons = ARRAY_SIZE(wbd111_keys),
-};
-
-static struct platform_device wbd111_keys_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &wbd111_keys_data,
- },
-};
-
-static struct gpio_led wbd111_leds[] = {
- {
- .name = "L3red",
- .gpio = 1,
- },
- {
- .name = "L4green",
- .gpio = 2,
- },
- {
- .name = "L4red",
- .gpio = 3,
- },
- {
- .name = "L3green",
- .gpio = 5,
- },
-};
-
-static struct gpio_led_platform_data wbd111_leds_data = {
- .num_leds = ARRAY_SIZE(wbd111_leds),
- .leds = wbd111_leds,
-};
-
-static struct platform_device wbd111_leds_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &wbd111_leds_data,
- },
-};
-
-static struct mtd_partition wbd111_partitions[] = {
- {
- .name = "RedBoot",
- .offset = 0,
- .size = 0x020000,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "kernel",
- .offset = 0x020000,
- .size = 0x100000,
- } , {
- .name = "rootfs",
- .offset = 0x120000,
- .size = 0x6a0000,
- } , {
- .name = "VCTL",
- .offset = 0x7c0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "cfg",
- .offset = 0x7d0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "FIS",
- .offset = 0x7e0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }
-};
-#define wbd111_num_partitions ARRAY_SIZE(wbd111_partitions)
-
-static void __init wbd111_init(void)
-{
- gemini_gpio_init();
- platform_register_uart();
- platform_register_pflash(SZ_8M, wbd111_partitions,
- wbd111_num_partitions);
- platform_device_register(&wbd111_leds_device);
- platform_device_register(&wbd111_keys_device);
- platform_register_rtc();
-}
-
-MACHINE_START(WBD111, "Wiliboard WBD-111")
- .atag_offset = 0x100,
- .map_io = gemini_map_io,
- .init_irq = gemini_init_irq,
- .init_time = gemini_timer_init,
- .init_machine = wbd111_init,
- .restart = gemini_restart,
-MACHINE_END
diff --git a/arch/arm/mach-gemini/board-wbd222.c b/arch/arm/mach-gemini/board-wbd222.c
deleted file mode 100644
index 6070282ce243..000000000000
--- a/arch/arm/mach-gemini/board-wbd222.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Support for Wiliboard WBD-222
- *
- * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/skbuff.h>
-#include <linux/gpio_keys.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-
-#include "common.h"
-
-static struct gpio_keys_button wbd222_keys[] = {
- {
- .code = KEY_SETUP,
- .gpio = 5,
- .active_low = 1,
- .desc = "reset",
- .type = EV_KEY,
- },
-};
-
-static struct gpio_keys_platform_data wbd222_keys_data = {
- .buttons = wbd222_keys,
- .nbuttons = ARRAY_SIZE(wbd222_keys),
-};
-
-static struct platform_device wbd222_keys_device = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &wbd222_keys_data,
- },
-};
-
-static struct gpio_led wbd222_leds[] = {
- {
- .name = "L3red",
- .gpio = 1,
- },
- {
- .name = "L4green",
- .gpio = 2,
- },
- {
- .name = "L4red",
- .gpio = 3,
- },
- {
- .name = "L3green",
- .gpio = 5,
- },
-};
-
-static struct gpio_led_platform_data wbd222_leds_data = {
- .num_leds = ARRAY_SIZE(wbd222_leds),
- .leds = wbd222_leds,
-};
-
-static struct platform_device wbd222_leds_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &wbd222_leds_data,
- },
-};
-
-static struct mtd_partition wbd222_partitions[] = {
- {
- .name = "RedBoot",
- .offset = 0,
- .size = 0x020000,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "kernel",
- .offset = 0x020000,
- .size = 0x100000,
- } , {
- .name = "rootfs",
- .offset = 0x120000,
- .size = 0x6a0000,
- } , {
- .name = "VCTL",
- .offset = 0x7c0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "cfg",
- .offset = 0x7d0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "FIS",
- .offset = 0x7e0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }
-};
-#define wbd222_num_partitions ARRAY_SIZE(wbd222_partitions)
-
-static void __init wbd222_init(void)
-{
- gemini_gpio_init();
- platform_register_uart();
- platform_register_pflash(SZ_8M, wbd222_partitions,
- wbd222_num_partitions);
- platform_device_register(&wbd222_leds_device);
- platform_device_register(&wbd222_keys_device);
- platform_register_rtc();
-}
-
-MACHINE_START(WBD222, "Wiliboard WBD-222")
- .atag_offset = 0x100,
- .map_io = gemini_map_io,
- .init_irq = gemini_init_irq,
- .init_time = gemini_timer_init,
- .init_machine = wbd222_init,
- .restart = gemini_restart,
-MACHINE_END
diff --git a/arch/arm/mach-gemini/common.h b/arch/arm/mach-gemini/common.h
deleted file mode 100644
index dd883698ff7e..000000000000
--- a/arch/arm/mach-gemini/common.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Common Gemini architecture functions
- *
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __GEMINI_COMMON_H__
-#define __GEMINI_COMMON_H__
-
-#include <linux/reboot.h>
-
-struct mtd_partition;
-
-extern void gemini_map_io(void);
-extern void gemini_init_irq(void);
-extern void gemini_timer_init(void);
-extern void gemini_gpio_init(void);
-extern void platform_register_rtc(void);
-
-/* Common platform devices registration functions */
-extern int platform_register_uart(void);
-extern int platform_register_pflash(unsigned int size,
- struct mtd_partition *parts,
- unsigned int nr_parts);
-
-extern void gemini_restart(enum reboot_mode mode, const char *cmd);
-
-#endif /* __GEMINI_COMMON_H__ */
diff --git a/arch/arm/mach-gemini/devices.c b/arch/arm/mach-gemini/devices.c
deleted file mode 100644
index 5cff29818b73..000000000000
--- a/arch/arm/mach-gemini/devices.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * Common devices definition for Gemini
- *
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/global_reg.h>
-
-static struct plat_serial8250_port serial_platform_data[] = {
- {
- .membase = (void *)IO_ADDRESS(GEMINI_UART_BASE),
- .mapbase = GEMINI_UART_BASE,
- .irq = IRQ_UART,
- .uartclk = UART_CLK,
- .regshift = 2,
- .iotype = UPIO_MEM,
- .type = PORT_16550A,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_FIXED_TYPE,
- },
- {},
-};
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_platform_data,
- },
-};
-
-int platform_register_uart(void)
-{
- return platform_device_register(&serial_device);
-}
-
-static struct resource flash_resource = {
- .start = GEMINI_FLASH_BASE,
- .flags = IORESOURCE_MEM,
-};
-
-static struct physmap_flash_data pflash_platform_data = {};
-
-static struct platform_device pflash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &pflash_platform_data,
- },
- .resource = &flash_resource,
- .num_resources = 1,
-};
-
-int platform_register_pflash(unsigned int size, struct mtd_partition *parts,
- unsigned int nr_parts)
-{
- unsigned int reg;
-
- reg = __raw_readl(IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_STATUS);
-
- if ((reg & FLASH_TYPE_MASK) != FLASH_TYPE_PARALLEL)
- return -ENXIO;
-
- if (reg & FLASH_WIDTH_16BIT)
- pflash_platform_data.width = 2;
- else
- pflash_platform_data.width = 1;
-
- /* enable parallel flash pins and disable others */
- reg = __raw_readl(IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_MISC_CTRL);
- reg &= ~PFLASH_PADS_DISABLE;
- reg |= SFLASH_PADS_DISABLE | NAND_PADS_DISABLE;
- __raw_writel(reg, IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_MISC_CTRL);
-
- flash_resource.end = flash_resource.start + size - 1;
-
- pflash_platform_data.parts = parts;
- pflash_platform_data.nr_parts = nr_parts;
-
- return platform_device_register(&pflash_device);
-}
-
-static struct resource gemini_rtc_resources[] = {
- [0] = {
- .start = GEMINI_RTC_BASE,
- .end = GEMINI_RTC_BASE + 0x24,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_RTC,
- .end = IRQ_RTC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device gemini_rtc_device = {
- .name = "rtc-gemini",
- .id = 0,
- .num_resources = ARRAY_SIZE(gemini_rtc_resources),
- .resource = gemini_rtc_resources,
-};
-
-int __init platform_register_rtc(void)
-{
- return platform_device_register(&gemini_rtc_device);
-}
-
diff --git a/arch/arm/mach-gemini/gpio.c b/arch/arm/mach-gemini/gpio.c
deleted file mode 100644
index 469a76ea0459..000000000000
--- a/arch/arm/mach-gemini/gpio.c
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * Gemini gpiochip and interrupt routines
- *
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * Based on plat-mxc/gpio.c:
- * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/gpio/driver.h>
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
-#define GPIO_BASE(x) IO_ADDRESS(GEMINI_GPIO_BASE(x))
-#define irq_to_gpio(x) ((x) - GPIO_IRQ_BASE)
-
-/* GPIO registers definition */
-#define GPIO_DATA_OUT 0x0
-#define GPIO_DATA_IN 0x4
-#define GPIO_DIR 0x8
-#define GPIO_DATA_SET 0x10
-#define GPIO_DATA_CLR 0x14
-#define GPIO_PULL_EN 0x18
-#define GPIO_PULL_TYPE 0x1C
-#define GPIO_INT_EN 0x20
-#define GPIO_INT_STAT 0x24
-#define GPIO_INT_MASK 0x2C
-#define GPIO_INT_CLR 0x30
-#define GPIO_INT_TYPE 0x34
-#define GPIO_INT_BOTH_EDGE 0x38
-#define GPIO_INT_LEVEL 0x3C
-#define GPIO_DEBOUNCE_EN 0x40
-#define GPIO_DEBOUNCE_PRESCALE 0x44
-
-#define GPIO_PORT_NUM 3
-
-static void _set_gpio_irqenable(void __iomem *base, unsigned int index,
- int enable)
-{
- unsigned int reg;
-
- reg = __raw_readl(base + GPIO_INT_EN);
- reg = (reg & (~(1 << index))) | (!!enable << index);
- __raw_writel(reg, base + GPIO_INT_EN);
-}
-
-static void gpio_ack_irq(struct irq_data *d)
-{
- unsigned int gpio = irq_to_gpio(d->irq);
- void __iomem *base = GPIO_BASE(gpio / 32);
-
- __raw_writel(1 << (gpio % 32), base + GPIO_INT_CLR);
-}
-
-static void gpio_mask_irq(struct irq_data *d)
-{
- unsigned int gpio = irq_to_gpio(d->irq);
- void __iomem *base = GPIO_BASE(gpio / 32);
-
- _set_gpio_irqenable(base, gpio % 32, 0);
-}
-
-static void gpio_unmask_irq(struct irq_data *d)
-{
- unsigned int gpio = irq_to_gpio(d->irq);
- void __iomem *base = GPIO_BASE(gpio / 32);
-
- _set_gpio_irqenable(base, gpio % 32, 1);
-}
-
-static int gpio_set_irq_type(struct irq_data *d, unsigned int type)
-{
- unsigned int gpio = irq_to_gpio(d->irq);
- unsigned int gpio_mask = 1 << (gpio % 32);
- void __iomem *base = GPIO_BASE(gpio / 32);
- unsigned int reg_both, reg_level, reg_type;
-
- reg_type = __raw_readl(base + GPIO_INT_TYPE);
- reg_level = __raw_readl(base + GPIO_INT_LEVEL);
- reg_both = __raw_readl(base + GPIO_INT_BOTH_EDGE);
-
- switch (type) {
- case IRQ_TYPE_EDGE_BOTH:
- reg_type &= ~gpio_mask;
- reg_both |= gpio_mask;
- break;
- case IRQ_TYPE_EDGE_RISING:
- reg_type &= ~gpio_mask;
- reg_both &= ~gpio_mask;
- reg_level &= ~gpio_mask;
- break;
- case IRQ_TYPE_EDGE_FALLING:
- reg_type &= ~gpio_mask;
- reg_both &= ~gpio_mask;
- reg_level |= gpio_mask;
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- reg_type |= gpio_mask;
- reg_level &= ~gpio_mask;
- break;
- case IRQ_TYPE_LEVEL_LOW:
- reg_type |= gpio_mask;
- reg_level |= gpio_mask;
- break;
- default:
- return -EINVAL;
- }
-
- __raw_writel(reg_type, base + GPIO_INT_TYPE);
- __raw_writel(reg_level, base + GPIO_INT_LEVEL);
- __raw_writel(reg_both, base + GPIO_INT_BOTH_EDGE);
-
- gpio_ack_irq(d);
-
- return 0;
-}
-
-static void gpio_irq_handler(struct irq_desc *desc)
-{
- unsigned int port = (unsigned int)irq_desc_get_handler_data(desc);
- unsigned int gpio_irq_no, irq_stat;
-
- irq_stat = __raw_readl(GPIO_BASE(port) + GPIO_INT_STAT);
-
- gpio_irq_no = GPIO_IRQ_BASE + port * 32;
- for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) {
-
- if ((irq_stat & 1) == 0)
- continue;
-
- generic_handle_irq(gpio_irq_no);
- }
-}
-
-static struct irq_chip gpio_irq_chip = {
- .name = "GPIO",
- .irq_ack = gpio_ack_irq,
- .irq_mask = gpio_mask_irq,
- .irq_unmask = gpio_unmask_irq,
- .irq_set_type = gpio_set_irq_type,
-};
-
-static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
- int dir)
-{
- void __iomem *base = GPIO_BASE(offset / 32);
- unsigned int reg;
-
- reg = __raw_readl(base + GPIO_DIR);
- if (dir)
- reg |= 1 << (offset % 32);
- else
- reg &= ~(1 << (offset % 32));
- __raw_writel(reg, base + GPIO_DIR);
-}
-
-static void gemini_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
- void __iomem *base = GPIO_BASE(offset / 32);
-
- if (value)
- __raw_writel(1 << (offset % 32), base + GPIO_DATA_SET);
- else
- __raw_writel(1 << (offset % 32), base + GPIO_DATA_CLR);
-}
-
-static int gemini_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
- void __iomem *base = GPIO_BASE(offset / 32);
-
- return (__raw_readl(base + GPIO_DATA_IN) >> (offset % 32)) & 1;
-}
-
-static int gemini_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
- _set_gpio_direction(chip, offset, 0);
- return 0;
-}
-
-static int gemini_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
- int value)
-{
- _set_gpio_direction(chip, offset, 1);
- gemini_gpio_set(chip, offset, value);
- return 0;
-}
-
-static struct gpio_chip gemini_gpio_chip = {
- .label = "Gemini",
- .direction_input = gemini_gpio_direction_input,
- .get = gemini_gpio_get,
- .direction_output = gemini_gpio_direction_output,
- .set = gemini_gpio_set,
- .base = 0,
- .ngpio = GPIO_PORT_NUM * 32,
-};
-
-void __init gemini_gpio_init(void)
-{
- int i, j;
-
- for (i = 0; i < GPIO_PORT_NUM; i++) {
- /* disable, unmask and clear all interrupts */
- __raw_writel(0x0, GPIO_BASE(i) + GPIO_INT_EN);
- __raw_writel(0x0, GPIO_BASE(i) + GPIO_INT_MASK);
- __raw_writel(~0x0, GPIO_BASE(i) + GPIO_INT_CLR);
-
- for (j = GPIO_IRQ_BASE + i * 32;
- j < GPIO_IRQ_BASE + (i + 1) * 32; j++) {
- irq_set_chip_and_handler(j, &gpio_irq_chip,
- handle_edge_irq);
- irq_clear_status_flags(j, IRQ_NOREQUEST);
- }
-
- irq_set_chained_handler_and_data(IRQ_GPIO(i), gpio_irq_handler,
- (void *)i);
- }
-
- BUG_ON(gpiochip_add_data(&gemini_gpio_chip, NULL));
-}
diff --git a/arch/arm/mach-gemini/idle.c b/arch/arm/mach-gemini/idle.c
deleted file mode 100644
index ddf8ec9d203b..000000000000
--- a/arch/arm/mach-gemini/idle.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * arch/arm/mach-gemini/idle.c
- */
-
-#include <linux/init.h>
-#include <asm/system_misc.h>
-#include <asm/proc-fns.h>
-
-static void gemini_idle(void)
-{
- /*
- * Because of broken hardware we have to enable interrupts or the CPU
- * will never wakeup... Acctualy it is not very good to enable
- * interrupts first since scheduler can miss a tick, but there is
- * no other way around this. Platforms that needs it for power saving
- * should enable it in init code, since by default it is
- * disabled.
- */
-
- /* FIXME: Enabling interrupts here is racy! */
- local_irq_enable();
- cpu_do_idle();
-}
-
-static int __init gemini_idle_init(void)
-{
- arm_pm_idle = gemini_idle;
- return 0;
-}
-
-arch_initcall(gemini_idle_init);
diff --git a/arch/arm/mach-gemini/include/mach/entry-macro.S b/arch/arm/mach-gemini/include/mach/entry-macro.S
deleted file mode 100644
index f044e430bfa4..000000000000
--- a/arch/arm/mach-gemini/include/mach/entry-macro.S
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Low-level IRQ helper macros for Gemini platform.
- *
- * Copyright (C) 2001-2006 Storlink, Corp.
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-
-#define IRQ_STATUS 0x14
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqstat, =IO_ADDRESS(GEMINI_INTERRUPT_BASE + IRQ_STATUS)
- ldr \irqnr, [\irqstat]
- cmp \irqnr, #0
- beq 2313f
- mov \tmp, \irqnr
- mov \irqnr, #0
-2312:
- tst \tmp, #1
- bne 2313f
- add \irqnr, \irqnr, #1
- mov \tmp, \tmp, lsr #1
- cmp \irqnr, #31
- bcc 2312b
-2313:
- .endm
diff --git a/arch/arm/mach-gemini/include/mach/global_reg.h b/arch/arm/mach-gemini/include/mach/global_reg.h
deleted file mode 100644
index de7ff7e849fc..000000000000
--- a/arch/arm/mach-gemini/include/mach/global_reg.h
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- * This file contains the hardware definitions for Gemini.
- *
- * Copyright (C) 2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef __MACH_GLOBAL_REG_H
-#define __MACH_GLOBAL_REG_H
-
-/* Global Word ID Register*/
-#define GLOBAL_ID 0x00
-
-#define CHIP_ID(reg) ((reg) >> 8)
-#define CHIP_REVISION(reg) ((reg) & 0xFF)
-
-/* Global Status Register */
-#define GLOBAL_STATUS 0x04
-
-#define CPU_BIG_ENDIAN (1 << 31)
-#define PLL_OSC_30M (1 << 30) /* else 60MHz */
-
-#define OPERATION_MODE_MASK (0xF << 26)
-#define OPM_IDDQ (0xF << 26)
-#define OPM_NAND (0xE << 26)
-#define OPM_RING (0xD << 26)
-#define OPM_DIRECT_BOOT (0xC << 26)
-#define OPM_USB1_PHY_TEST (0xB << 26)
-#define OPM_USB0_PHY_TEST (0xA << 26)
-#define OPM_SATA1_PHY_TEST (0x9 << 26)
-#define OPM_SATA0_PHY_TEST (0x8 << 26)
-#define OPM_ICE_ARM (0x7 << 26)
-#define OPM_ICE_FARADAY (0x6 << 26)
-#define OPM_PLL_BYPASS (0x5 << 26)
-#define OPM_DEBUG (0x4 << 26)
-#define OPM_BURN_IN (0x3 << 26)
-#define OPM_MBIST (0x2 << 26)
-#define OPM_SCAN (0x1 << 26)
-#define OPM_REAL (0x0 << 26)
-
-#define FLASH_TYPE_MASK (0x3 << 24)
-#define FLASH_TYPE_NAND_2K (0x3 << 24)
-#define FLASH_TYPE_NAND_512 (0x2 << 24)
-#define FLASH_TYPE_PARALLEL (0x1 << 24)
-#define FLASH_TYPE_SERIAL (0x0 << 24)
-/* if parallel */
-#define FLASH_WIDTH_16BIT (1 << 23) /* else 8 bit */
-/* if serial */
-#define FLASH_ATMEL (1 << 23) /* else STM */
-
-#define FLASH_SIZE_MASK (0x3 << 21)
-#define NAND_256M (0x3 << 21) /* and more */
-#define NAND_128M (0x2 << 21)
-#define NAND_64M (0x1 << 21)
-#define NAND_32M (0x0 << 21)
-#define ATMEL_16M (0x3 << 21) /* and more */
-#define ATMEL_8M (0x2 << 21)
-#define ATMEL_4M_2M (0x1 << 21)
-#define ATMEL_1M (0x0 << 21) /* and less */
-#define STM_32M (1 << 22) /* and more */
-#define STM_16M (0 << 22) /* and less */
-
-#define FLASH_PARALLEL_HIGH_PIN_CNT (1 << 20) /* else low pin cnt */
-
-#define CPU_AHB_RATIO_MASK (0x3 << 18)
-#define CPU_AHB_1_1 (0x0 << 18)
-#define CPU_AHB_3_2 (0x1 << 18)
-#define CPU_AHB_24_13 (0x2 << 18)
-#define CPU_AHB_2_1 (0x3 << 18)
-
-#define REG_TO_AHB_SPEED(reg) ((((reg) >> 15) & 0x7) * 10 + 130)
-#define AHB_SPEED_TO_REG(x) ((((x - 130)) / 10) << 15)
-
-/* it is posible to override some settings, use >> OVERRIDE_xxxx_SHIFT */
-#define OVERRIDE_FLASH_TYPE_SHIFT 16
-#define OVERRIDE_FLASH_WIDTH_SHIFT 16
-#define OVERRIDE_FLASH_SIZE_SHIFT 16
-#define OVERRIDE_CPU_AHB_RATIO_SHIFT 15
-#define OVERRIDE_AHB_SPEED_SHIFT 15
-
-/* Global PLL Control Register */
-#define GLOBAL_PLL_CTRL 0x08
-
-#define PLL_BYPASS (1 << 31)
-#define PLL_POWER_DOWN (1 << 8)
-#define PLL_CONTROL_Q (0x1F << 0)
-
-/* Global Soft Reset Control Register */
-#define GLOBAL_RESET 0x0C
-
-#define RESET_GLOBAL (1 << 31)
-#define RESET_CPU1 (1 << 30)
-#define RESET_TVE (1 << 28)
-#define RESET_SATA1 (1 << 27)
-#define RESET_SATA0 (1 << 26)
-#define RESET_CIR (1 << 25)
-#define RESET_EXT_DEV (1 << 24)
-#define RESET_WD (1 << 23)
-#define RESET_GPIO2 (1 << 22)
-#define RESET_GPIO1 (1 << 21)
-#define RESET_GPIO0 (1 << 20)
-#define RESET_SSP (1 << 19)
-#define RESET_UART (1 << 18)
-#define RESET_TIMER (1 << 17)
-#define RESET_RTC (1 << 16)
-#define RESET_INT1 (1 << 15)
-#define RESET_INT0 (1 << 14)
-#define RESET_LCD (1 << 13)
-#define RESET_LPC (1 << 12)
-#define RESET_APB (1 << 11)
-#define RESET_DMA (1 << 10)
-#define RESET_USB1 (1 << 9)
-#define RESET_USB0 (1 << 8)
-#define RESET_PCI (1 << 7)
-#define RESET_GMAC1 (1 << 6)
-#define RESET_GMAC0 (1 << 5)
-#define RESET_SECURITY (1 << 4)
-#define RESET_RAID (1 << 3)
-#define RESET_IDE (1 << 2)
-#define RESET_FLASH (1 << 1)
-#define RESET_DRAM (1 << 0)
-
-/* Global IO Pad Driving Capability Control Register */
-#define GLOBAL_IO_DRIVING_CTRL 0x10
-
-#define DRIVING_CURRENT_MASK 0x3
-
-/* here 00-4mA, 01-8mA, 10-12mA, 11-16mA */
-#define GPIO1_PADS_31_28_SHIFT 28
-#define GPIO0_PADS_31_16_SHIFT 26
-#define GPIO0_PADS_15_0_SHIFT 24
-#define PCI_AND_EXT_RESET_PADS_SHIFT 22
-#define IDE_PADS_SHIFT 20
-#define GMAC1_PADS_SHIFT 18
-#define GMAC0_PADS_SHIFT 16
-/* DRAM is not in mA and poorly documented */
-#define DRAM_CLOCK_PADS_SHIFT 8
-#define DRAM_DATA_PADS_SHIFT 4
-#define DRAM_CONTROL_PADS_SHIFT 0
-
-/* Global IO Pad Slew Rate Control Register */
-#define GLOBAL_IO_SLEW_RATE_CTRL 0x14
-
-#define GPIO1_PADS_31_28_SLOW (1 << 10)
-#define GPIO0_PADS_31_16_SLOW (1 << 9)
-#define GPIO0_PADS_15_0_SLOW (1 << 8)
-#define PCI_PADS_SLOW (1 << 7)
-#define IDE_PADS_SLOW (1 << 6)
-#define GMAC1_PADS_SLOW (1 << 5)
-#define GMAC0_PADS_SLOW (1 << 4)
-#define DRAM_CLOCK_PADS_SLOW (1 << 1)
-#define DRAM_IO_PADS_SLOW (1 << 0)
-
-/*
- * General skew control defines
- * 16 steps, each step is around 0.2ns
- */
-#define SKEW_MASK 0xF
-
-/* Global IDE PAD Skew Control Register */
-#define GLOBAL_IDE_SKEW_CTRL 0x18
-
-#define IDE1_HOST_STROBE_DELAY_SHIFT 28
-#define IDE1_DEVICE_STROBE_DELAY_SHIFT 24
-#define IDE1_OUTPUT_IO_SKEW_SHIFT 20
-#define IDE1_INPUT_IO_SKEW_SHIFT 16
-#define IDE0_HOST_STROBE_DELAY_SHIFT 12
-#define IDE0_DEVICE_STROBE_DELAY_SHIFT 8
-#define IDE0_OUTPUT_IO_SKEW_SHIFT 4
-#define IDE0_INPUT_IO_SKEW_SHIFT 0
-
-/* Global GMAC Control Pad Skew Control Register */
-#define GLOBAL_GMAC_CTRL_SKEW_CTRL 0x1C
-
-#define GMAC1_TXC_SKEW_SHIFT 28
-#define GMAC1_TXEN_SKEW_SHIFT 24
-#define GMAC1_RXC_SKEW_SHIFT 20
-#define GMAC1_RXDV_SKEW_SHIFT 16
-#define GMAC0_TXC_SKEW_SHIFT 12
-#define GMAC0_TXEN_SKEW_SHIFT 8
-#define GMAC0_RXC_SKEW_SHIFT 4
-#define GMAC0_RXDV_SKEW_SHIFT 0
-
-/* Global GMAC0 Data PAD Skew Control Register */
-#define GLOBAL_GMAC0_DATA_SKEW_CTRL 0x20
-/* Global GMAC1 Data PAD Skew Control Register */
-#define GLOBAL_GMAC1_DATA_SKEW_CTRL 0x24
-
-#define GMAC_TXD_SKEW_SHIFT(x) (((x) * 4) + 16)
-#define GMAC_RXD_SKEW_SHIFT(x) ((x) * 4)
-
-/* CPU has two AHB busses. */
-
-/* Global Arbitration0 Control Register */
-#define GLOBAL_ARBITRATION0_CTRL 0x28
-
-#define BOOT_CONTROLLER_HIGH_PRIO (1 << 3)
-#define DMA_BUS1_HIGH_PRIO (1 << 2)
-#define CPU0_HIGH_PRIO (1 << 0)
-
-/* Global Arbitration1 Control Register */
-#define GLOBAL_ARBITRATION1_CTRL 0x2C
-
-#define TVE_HIGH_PRIO (1 << 9)
-#define PCI_HIGH_PRIO (1 << 8)
-#define USB1_HIGH_PRIO (1 << 7)
-#define USB0_HIGH_PRIO (1 << 6)
-#define GMAC1_HIGH_PRIO (1 << 5)
-#define GMAC0_HIGH_PRIO (1 << 4)
-#define SECURITY_HIGH_PRIO (1 << 3)
-#define RAID_HIGH_PRIO (1 << 2)
-#define IDE_HIGH_PRIO (1 << 1)
-#define DMA_BUS2_HIGH_PRIO (1 << 0)
-
-/* Common bits for both arbitration registers */
-#define BURST_LENGTH_SHIFT 16
-#define BURST_LENGTH_MASK (0x3F << 16)
-
-/* Miscellaneous Control Register */
-#define GLOBAL_MISC_CTRL 0x30
-
-#define MEMORY_SPACE_SWAP (1 << 31)
-#define USB1_PLUG_MINIB (1 << 30) /* else plug is mini-A */
-#define USB0_PLUG_MINIB (1 << 29)
-#define GMAC_GMII (1 << 28)
-#define GMAC_1_ENABLE (1 << 27)
-/* TODO: define ATA/SATA bits */
-#define USB1_VBUS_ON (1 << 23)
-#define USB0_VBUS_ON (1 << 22)
-#define APB_CLKOUT_ENABLE (1 << 21)
-#define TVC_CLKOUT_ENABLE (1 << 20)
-#define EXT_CLKIN_ENABLE (1 << 19)
-#define PCI_66MHZ (1 << 18) /* else 33 MHz */
-#define PCI_CLKOUT_ENABLE (1 << 17)
-#define LPC_CLKOUT_ENABLE (1 << 16)
-#define USB1_WAKEUP_ON (1 << 15)
-#define USB0_WAKEUP_ON (1 << 14)
-/* TODO: define PCI idle detect bits */
-#define TVC_PADS_ENABLE (1 << 9)
-#define SSP_PADS_ENABLE (1 << 8)
-#define LCD_PADS_ENABLE (1 << 7)
-#define LPC_PADS_ENABLE (1 << 6)
-#define PCI_PADS_ENABLE (1 << 5)
-#define IDE_PADS_ENABLE (1 << 4)
-#define DRAM_PADS_POWER_DOWN (1 << 3)
-#define NAND_PADS_DISABLE (1 << 2)
-#define PFLASH_PADS_DISABLE (1 << 1)
-#define SFLASH_PADS_DISABLE (1 << 0)
-
-/* Global Clock Control Register */
-#define GLOBAL_CLOCK_CTRL 0x34
-
-#define POWER_STATE_G0 (1 << 31)
-#define POWER_STATE_S1 (1 << 30) /* else it is S3/S4 state */
-#define SECURITY_APB_AHB (1 << 29)
-/* else Security APB clk will be 0.75xAHB */
-/* TODO: TVC clock divider */
-#define PCI_CLKRUN_ENABLE (1 << 16)
-#define BOOT_CLK_DISABLE (1 << 13)
-#define TVC_CLK_DISABLE (1 << 12)
-#define FLASH_CLK_DISABLE (1 << 11)
-#define DDR_CLK_DISABLE (1 << 10)
-#define PCI_CLK_DISABLE (1 << 9)
-#define IDE_CLK_DISABLE (1 << 8)
-#define USB1_CLK_DISABLE (1 << 7)
-#define USB0_CLK_DISABLE (1 << 6)
-#define SATA1_CLK_DISABLE (1 << 5)
-#define SATA0_CLK_DISABLE (1 << 4)
-#define GMAC1_CLK_DISABLE (1 << 3)
-#define GMAC0_CLK_DISABLE (1 << 2)
-#define SECURITY_CLK_DISABLE (1 << 1)
-
-/* TODO: other registers definitions if needed */
-
-#endif /* __MACH_GLOBAL_REG_H */
diff --git a/arch/arm/mach-gemini/include/mach/hardware.h b/arch/arm/mach-gemini/include/mach/hardware.h
deleted file mode 100644
index f0390f184742..000000000000
--- a/arch/arm/mach-gemini/include/mach/hardware.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * This file contains the hardware definitions for Gemini.
- *
- * Copyright (C) 2001-2006 Storlink, Corp.
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef __MACH_HARDWARE_H
-#define __MACH_HARDWARE_H
-
-/*
- * Memory Map definitions
- */
-#ifdef CONFIG_GEMINI_MEM_SWAP
-# define GEMINI_DRAM_BASE 0x00000000
-# define GEMINI_SRAM_BASE 0x70000000
-#else
-# define GEMINI_SRAM_BASE 0x00000000
-# define GEMINI_DRAM_BASE 0x10000000
-#endif
-#define GEMINI_FLASH_BASE 0x30000000
-#define GEMINI_GLOBAL_BASE 0x40000000
-#define GEMINI_WAQTCHDOG_BASE 0x41000000
-#define GEMINI_UART_BASE 0x42000000
-#define GEMINI_TIMER_BASE 0x43000000
-#define GEMINI_LCD_BASE 0x44000000
-#define GEMINI_RTC_BASE 0x45000000
-#define GEMINI_SATA_BASE 0x46000000
-#define GEMINI_LPC_HOST_BASE 0x47000000
-#define GEMINI_LPC_IO_BASE 0x47800000
-#define GEMINI_INTERRUPT_BASE 0x48000000
-/* TODO: Different interrupt controllers when SMP
- * #define GEMINI_INTERRUPT0_BASE 0x48000000
- * #define GEMINI_INTERRUPT1_BASE 0x49000000
- */
-#define GEMINI_SSP_CTRL_BASE 0x4A000000
-#define GEMINI_POWER_CTRL_BASE 0x4B000000
-#define GEMINI_CIR_BASE 0x4C000000
-#define GEMINI_GPIO_BASE(x) (0x4D000000 + (x) * 0x1000000)
-#define GEMINI_PCI_IO_BASE 0x50000000
-#define GEMINI_PCI_MEM_BASE 0x58000000
-#define GEMINI_TOE_BASE 0x60000000
-#define GEMINI_GMAC0_BASE 0x6000A000
-#define GEMINI_GMAC1_BASE 0x6000E000
-#define GEMINI_SECURITY_BASE 0x62000000
-#define GEMINI_IDE0_BASE 0x63000000
-#define GEMINI_IDE1_BASE 0x63400000
-#define GEMINI_RAID_BASE 0x64000000
-#define GEMINI_FLASH_CTRL_BASE 0x65000000
-#define GEMINI_DRAM_CTRL_BASE 0x66000000
-#define GEMINI_GENERAL_DMA_BASE 0x67000000
-#define GEMINI_USB0_BASE 0x68000000
-#define GEMINI_USB1_BASE 0x69000000
-#define GEMINI_BIG_ENDIAN_BASE 0x80000000
-
-
-/*
- * UART Clock when System clk is 150MHz
- */
-#define UART_CLK 48000000
-
-/*
- * macro to get at IO space when running virtually
- */
-#define IO_ADDRESS(x) IOMEM((((x) & 0xFFF00000) >> 4) | ((x) & 0x000FFFFF) | 0xF0000000)
-
-#endif
diff --git a/arch/arm/mach-gemini/include/mach/irqs.h b/arch/arm/mach-gemini/include/mach/irqs.h
deleted file mode 100644
index 06bc47e77e8b..000000000000
--- a/arch/arm/mach-gemini/include/mach/irqs.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Copyright (C) 2001-2006 Storlink, Corp.
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __MACH_IRQS_H__
-#define __MACH_IRQS_H__
-
-#define IRQ_SERIRQ1 31
-#define IRQ_SERIRQ0 30
-#define IRQ_PCID 29
-#define IRQ_PCIC 28
-#define IRQ_PCIB 27
-#define IRQ_PWR 26
-#define IRQ_CIR 25
-#define IRQ_GPIO(x) (22 + (x))
-#define IRQ_SSP 21
-#define IRQ_LPC 20
-#define IRQ_LCD 19
-#define IRQ_UART 18
-#define IRQ_RTC 17
-#define IRQ_TIMER3 16
-#define IRQ_TIMER2 15
-#define IRQ_TIMER1 14
-#define IRQ_FLASH 12
-#define IRQ_USB1 11
-#define IRQ_USB0 10
-#define IRQ_DMA 9
-#define IRQ_PCI 8
-#define IRQ_IPSEC 7
-#define IRQ_RAID 6
-#define IRQ_IDE1 5
-#define IRQ_IDE0 4
-#define IRQ_WATCHDOG 3
-#define IRQ_GMAC1 2
-#define IRQ_GMAC0 1
-#define IRQ_IPI 0
-
-#define NORMAL_IRQ_NUM 32
-
-#define GPIO_IRQ_BASE NORMAL_IRQ_NUM
-#define GPIO_IRQ_NUM (3 * 32)
-
-#define ARCH_TIMER_IRQ IRQ_TIMER2
-
-#define NR_IRQS (NORMAL_IRQ_NUM + GPIO_IRQ_NUM)
-
-#endif /* __MACH_IRQS_H__ */
diff --git a/arch/arm/mach-gemini/include/mach/uncompress.h b/arch/arm/mach-gemini/include/mach/uncompress.h
deleted file mode 100644
index 02e225673acb..000000000000
--- a/arch/arm/mach-gemini/include/mach/uncompress.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * Based on mach-pxa/include/mach/uncompress.h:
- * Copyright: (C) 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __MACH_UNCOMPRESS_H
-#define __MACH_UNCOMPRESS_H
-
-#include <linux/serial_reg.h>
-#include <mach/hardware.h>
-
-static volatile unsigned long * const UART = (unsigned long *)GEMINI_UART_BASE;
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader. If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- */
-static inline void putc(char c)
-{
- while (!(UART[UART_LSR] & UART_LSR_THRE))
- barrier();
- UART[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#endif /* __MACH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c
deleted file mode 100644
index d929b3ff18fd..000000000000
--- a/arch/arm/mach-gemini/irq.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Interrupt routines for Gemini
- *
- * Copyright (C) 2001-2006 Storlink, Corp.
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/stddef.h>
-#include <linux/list.h>
-#include <linux/sched.h>
-#include <linux/cpu.h>
-
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-#include <asm/system_misc.h>
-#include <mach/hardware.h>
-
-#define IRQ_SOURCE(base_addr) (base_addr + 0x00)
-#define IRQ_MASK(base_addr) (base_addr + 0x04)
-#define IRQ_CLEAR(base_addr) (base_addr + 0x08)
-#define IRQ_TMODE(base_addr) (base_addr + 0x0C)
-#define IRQ_TLEVEL(base_addr) (base_addr + 0x10)
-#define IRQ_STATUS(base_addr) (base_addr + 0x14)
-#define FIQ_SOURCE(base_addr) (base_addr + 0x20)
-#define FIQ_MASK(base_addr) (base_addr + 0x24)
-#define FIQ_CLEAR(base_addr) (base_addr + 0x28)
-#define FIQ_TMODE(base_addr) (base_addr + 0x2C)
-#define FIQ_LEVEL(base_addr) (base_addr + 0x30)
-#define FIQ_STATUS(base_addr) (base_addr + 0x34)
-
-static void gemini_ack_irq(struct irq_data *d)
-{
- __raw_writel(1 << d->irq, IRQ_CLEAR(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
-}
-
-static void gemini_mask_irq(struct irq_data *d)
-{
- unsigned int mask;
-
- mask = __raw_readl(IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
- mask &= ~(1 << d->irq);
- __raw_writel(mask, IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
-}
-
-static void gemini_unmask_irq(struct irq_data *d)
-{
- unsigned int mask;
-
- mask = __raw_readl(IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
- mask |= (1 << d->irq);
- __raw_writel(mask, IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
-}
-
-static struct irq_chip gemini_irq_chip = {
- .name = "INTC",
- .irq_ack = gemini_ack_irq,
- .irq_mask = gemini_mask_irq,
- .irq_unmask = gemini_unmask_irq,
-};
-
-static struct resource irq_resource = {
- .name = "irq_handler",
- .start = GEMINI_INTERRUPT_BASE,
- .end = FIQ_STATUS(GEMINI_INTERRUPT_BASE) + 4,
-};
-
-void __init gemini_init_irq(void)
-{
- unsigned int i, mode = 0, level = 0;
-
- /*
- * Disable the idle handler by default since it is buggy
- * For more info see arch/arm/mach-gemini/idle.c
- */
- cpu_idle_poll_ctrl(true);
-
- request_resource(&iomem_resource, &irq_resource);
-
- for (i = 0; i < NR_IRQS; i++) {
- irq_set_chip(i, &gemini_irq_chip);
- if((i >= IRQ_TIMER1 && i <= IRQ_TIMER3) || (i >= IRQ_SERIRQ0 && i <= IRQ_SERIRQ1)) {
- irq_set_handler(i, handle_edge_irq);
- mode |= 1 << i;
- level |= 1 << i;
- } else {
- irq_set_handler(i, handle_level_irq);
- }
- irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE);
- }
-
- /* Disable all interrupts */
- __raw_writel(0, IRQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
- __raw_writel(0, FIQ_MASK(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
-
- /* Set interrupt mode */
- __raw_writel(mode, IRQ_TMODE(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
- __raw_writel(level, IRQ_TLEVEL(IO_ADDRESS(GEMINI_INTERRUPT_BASE)));
-}
diff --git a/arch/arm/mach-gemini/mm.c b/arch/arm/mach-gemini/mm.c
deleted file mode 100644
index 2c2cd284bb6a..000000000000
--- a/arch/arm/mach-gemini/mm.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Static mappings for Gemini
- *
- * Copyright (C) 2001-2006 Storlink, Corp.
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-
-/* Page table mapping for I/O region */
-static struct map_desc gemini_io_desc[] __initdata = {
- {
- .virtual = (unsigned long)IO_ADDRESS(GEMINI_GLOBAL_BASE),
- .pfn =__phys_to_pfn(GEMINI_GLOBAL_BASE),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)IO_ADDRESS(GEMINI_UART_BASE),
- .pfn = __phys_to_pfn(GEMINI_UART_BASE),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)IO_ADDRESS(GEMINI_TIMER_BASE),
- .pfn = __phys_to_pfn(GEMINI_TIMER_BASE),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)IO_ADDRESS(GEMINI_INTERRUPT_BASE),
- .pfn = __phys_to_pfn(GEMINI_INTERRUPT_BASE),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)IO_ADDRESS(GEMINI_POWER_CTRL_BASE),
- .pfn = __phys_to_pfn(GEMINI_POWER_CTRL_BASE),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)IO_ADDRESS(GEMINI_GPIO_BASE(0)),
- .pfn = __phys_to_pfn(GEMINI_GPIO_BASE(0)),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)IO_ADDRESS(GEMINI_GPIO_BASE(1)),
- .pfn = __phys_to_pfn(GEMINI_GPIO_BASE(1)),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)IO_ADDRESS(GEMINI_GPIO_BASE(2)),
- .pfn = __phys_to_pfn(GEMINI_GPIO_BASE(2)),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)IO_ADDRESS(GEMINI_FLASH_CTRL_BASE),
- .pfn = __phys_to_pfn(GEMINI_FLASH_CTRL_BASE),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)IO_ADDRESS(GEMINI_DRAM_CTRL_BASE),
- .pfn = __phys_to_pfn(GEMINI_DRAM_CTRL_BASE),
- .length = SZ_512K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)IO_ADDRESS(GEMINI_GENERAL_DMA_BASE),
- .pfn = __phys_to_pfn(GEMINI_GENERAL_DMA_BASE),
- .length = SZ_512K,
- .type = MT_DEVICE,
- },
-};
-
-void __init gemini_map_io(void)
-{
- iotable_init(gemini_io_desc, ARRAY_SIZE(gemini_io_desc));
-}
diff --git a/arch/arm/mach-gemini/reset.c b/arch/arm/mach-gemini/reset.c
deleted file mode 100644
index 21a6d6d4f9c4..000000000000
--- a/arch/arm/mach-gemini/reset.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (C) 2001-2006 Storlink, Corp.
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef __MACH_SYSTEM_H
-#define __MACH_SYSTEM_H
-
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/global_reg.h>
-
-#include "common.h"
-
-void gemini_restart(enum reboot_mode mode, const char *cmd)
-{
- __raw_writel(RESET_GLOBAL | RESET_CPU1,
- IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_RESET);
-}
-
-#endif /* __MACH_SYSTEM_H */
diff --git a/arch/arm/mach-gemini/time.c b/arch/arm/mach-gemini/time.c
deleted file mode 100644
index f5f18df5aacd..000000000000
--- a/arch/arm/mach-gemini/time.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- * Copyright (C) 2001-2006 Storlink, Corp.
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/global_reg.h>
-#include <asm/mach/time.h>
-#include <linux/clockchips.h>
-#include <linux/clocksource.h>
-#include <linux/sched_clock.h>
-
-/*
- * Register definitions for the timers
- */
-
-#define TIMER1_BASE GEMINI_TIMER_BASE
-#define TIMER2_BASE (GEMINI_TIMER_BASE + 0x10)
-#define TIMER3_BASE (GEMINI_TIMER_BASE + 0x20)
-
-#define TIMER_COUNT(BASE) (IO_ADDRESS(BASE) + 0x00)
-#define TIMER_LOAD(BASE) (IO_ADDRESS(BASE) + 0x04)
-#define TIMER_MATCH1(BASE) (IO_ADDRESS(BASE) + 0x08)
-#define TIMER_MATCH2(BASE) (IO_ADDRESS(BASE) + 0x0C)
-#define TIMER_CR (IO_ADDRESS(GEMINI_TIMER_BASE) + 0x30)
-#define TIMER_INTR_STATE (IO_ADDRESS(GEMINI_TIMER_BASE) + 0x34)
-#define TIMER_INTR_MASK (IO_ADDRESS(GEMINI_TIMER_BASE) + 0x38)
-
-#define TIMER_1_CR_ENABLE (1 << 0)
-#define TIMER_1_CR_CLOCK (1 << 1)
-#define TIMER_1_CR_INT (1 << 2)
-#define TIMER_2_CR_ENABLE (1 << 3)
-#define TIMER_2_CR_CLOCK (1 << 4)
-#define TIMER_2_CR_INT (1 << 5)
-#define TIMER_3_CR_ENABLE (1 << 6)
-#define TIMER_3_CR_CLOCK (1 << 7)
-#define TIMER_3_CR_INT (1 << 8)
-#define TIMER_1_CR_UPDOWN (1 << 9)
-#define TIMER_2_CR_UPDOWN (1 << 10)
-#define TIMER_3_CR_UPDOWN (1 << 11)
-#define TIMER_DEFAULT_FLAGS (TIMER_1_CR_UPDOWN | \
- TIMER_3_CR_ENABLE | \
- TIMER_3_CR_UPDOWN)
-
-#define TIMER_1_INT_MATCH1 (1 << 0)
-#define TIMER_1_INT_MATCH2 (1 << 1)
-#define TIMER_1_INT_OVERFLOW (1 << 2)
-#define TIMER_2_INT_MATCH1 (1 << 3)
-#define TIMER_2_INT_MATCH2 (1 << 4)
-#define TIMER_2_INT_OVERFLOW (1 << 5)
-#define TIMER_3_INT_MATCH1 (1 << 6)
-#define TIMER_3_INT_MATCH2 (1 << 7)
-#define TIMER_3_INT_OVERFLOW (1 << 8)
-#define TIMER_INT_ALL_MASK 0x1ff
-
-
-static unsigned int tick_rate;
-
-static u64 notrace gemini_read_sched_clock(void)
-{
- return readl(TIMER_COUNT(TIMER3_BASE));
-}
-
-static int gemini_timer_set_next_event(unsigned long cycles,
- struct clock_event_device *evt)
-{
- u32 cr;
-
- /* Setup the match register */
- cr = readl(TIMER_COUNT(TIMER1_BASE));
- writel(cr + cycles, TIMER_MATCH1(TIMER1_BASE));
- if (readl(TIMER_COUNT(TIMER1_BASE)) - cr > cycles)
- return -ETIME;
-
- return 0;
-}
-
-static int gemini_timer_shutdown(struct clock_event_device *evt)
-{
- u32 cr;
-
- /*
- * Disable also for oneshot: the set_next() call will arm the timer
- * instead.
- */
- /* Stop timer and interrupt. */
- cr = readl(TIMER_CR);
- cr &= ~(TIMER_1_CR_ENABLE | TIMER_1_CR_INT);
- writel(cr, TIMER_CR);
-
- /* Setup counter start from 0 */
- writel(0, TIMER_COUNT(TIMER1_BASE));
- writel(0, TIMER_LOAD(TIMER1_BASE));
-
- /* enable interrupt */
- cr = readl(TIMER_INTR_MASK);
- cr &= ~(TIMER_1_INT_OVERFLOW | TIMER_1_INT_MATCH2);
- cr |= TIMER_1_INT_MATCH1;
- writel(cr, TIMER_INTR_MASK);
-
- /* start the timer */
- cr = readl(TIMER_CR);
- cr |= TIMER_1_CR_ENABLE;
- writel(cr, TIMER_CR);
-
- return 0;
-}
-
-static int gemini_timer_set_periodic(struct clock_event_device *evt)
-{
- u32 period = DIV_ROUND_CLOSEST(tick_rate, HZ);
- u32 cr;
-
- /* Stop timer and interrupt */
- cr = readl(TIMER_CR);
- cr &= ~(TIMER_1_CR_ENABLE | TIMER_1_CR_INT);
- writel(cr, TIMER_CR);
-
- /* Setup timer to fire at 1/HT intervals. */
- cr = 0xffffffff - (period - 1);
- writel(cr, TIMER_COUNT(TIMER1_BASE));
- writel(cr, TIMER_LOAD(TIMER1_BASE));
-
- /* enable interrupt on overflow */
- cr = readl(TIMER_INTR_MASK);
- cr &= ~(TIMER_1_INT_MATCH1 | TIMER_1_INT_MATCH2);
- cr |= TIMER_1_INT_OVERFLOW;
- writel(cr, TIMER_INTR_MASK);
-
- /* Start the timer */
- cr = readl(TIMER_CR);
- cr |= TIMER_1_CR_ENABLE;
- cr |= TIMER_1_CR_INT;
- writel(cr, TIMER_CR);
-
- return 0;
-}
-
-/* Use TIMER1 as clock event */
-static struct clock_event_device gemini_clockevent = {
- .name = "TIMER1",
- /* Reasonably fast and accurate clock event */
- .rating = 300,
- .shift = 32,
- .features = CLOCK_EVT_FEAT_PERIODIC |
- CLOCK_EVT_FEAT_ONESHOT,
- .set_next_event = gemini_timer_set_next_event,
- .set_state_shutdown = gemini_timer_shutdown,
- .set_state_periodic = gemini_timer_set_periodic,
- .set_state_oneshot = gemini_timer_shutdown,
- .tick_resume = gemini_timer_shutdown,
-};
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t gemini_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = &gemini_clockevent;
-
- evt->event_handler(evt);
- return IRQ_HANDLED;
-}
-
-static struct irqaction gemini_timer_irq = {
- .name = "Gemini Timer Tick",
- .flags = IRQF_TIMER,
- .handler = gemini_timer_interrupt,
-};
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
-void __init gemini_timer_init(void)
-{
- u32 reg_v;
-
- reg_v = readl(IO_ADDRESS(GEMINI_GLOBAL_BASE + GLOBAL_STATUS));
- tick_rate = REG_TO_AHB_SPEED(reg_v) * 1000000;
-
- printk(KERN_INFO "Bus: %dMHz", tick_rate / 1000000);
-
- tick_rate /= 6; /* APB bus run AHB*(1/6) */
-
- switch(reg_v & CPU_AHB_RATIO_MASK) {
- case CPU_AHB_1_1:
- printk(KERN_CONT "(1/1)\n");
- break;
- case CPU_AHB_3_2:
- printk(KERN_CONT "(3/2)\n");
- break;
- case CPU_AHB_24_13:
- printk(KERN_CONT "(24/13)\n");
- break;
- case CPU_AHB_2_1:
- printk(KERN_CONT "(2/1)\n");
- break;
- }
-
- /*
- * Reset the interrupt mask and status
- */
- writel(TIMER_INT_ALL_MASK, TIMER_INTR_MASK);
- writel(0, TIMER_INTR_STATE);
- writel(TIMER_DEFAULT_FLAGS, TIMER_CR);
-
- /*
- * Setup free-running clocksource timer (interrupts
- * disabled.)
- */
- writel(0, TIMER_COUNT(TIMER3_BASE));
- writel(0, TIMER_LOAD(TIMER3_BASE));
- writel(0, TIMER_MATCH1(TIMER3_BASE));
- writel(0, TIMER_MATCH2(TIMER3_BASE));
- clocksource_mmio_init(TIMER_COUNT(TIMER3_BASE),
- "gemini_clocksource", tick_rate,
- 300, 32, clocksource_mmio_readl_up);
- sched_clock_register(gemini_read_sched_clock, 32, tick_rate);
-
- /*
- * Setup clockevent timer (interrupt-driven.)
- */
- writel(0, TIMER_COUNT(TIMER1_BASE));
- writel(0, TIMER_LOAD(TIMER1_BASE));
- writel(0, TIMER_MATCH1(TIMER1_BASE));
- writel(0, TIMER_MATCH2(TIMER1_BASE));
- setup_irq(IRQ_TIMER1, &gemini_timer_irq);
- gemini_clockevent.cpumask = cpumask_of(0);
- clockevents_config_and_register(&gemini_clockevent, tick_rate,
- 1, 0xffffffff);
-
-}
diff --git a/arch/arm/mach-hisi/platmcpm.c b/arch/arm/mach-hisi/platmcpm.c
index a6c117622d67..f66815c3dd07 100644
--- a/arch/arm/mach-hisi/platmcpm.c
+++ b/arch/arm/mach-hisi/platmcpm.c
@@ -279,6 +279,8 @@ static int __init hip04_smp_init(void)
&hip04_boot_method[0], 4);
if (ret)
goto err;
+
+ ret = -ENODEV;
np_sctl = of_find_compatible_node(NULL, NULL, "hisilicon,sysctrl");
if (!np_sctl)
goto err;
diff --git a/arch/arm/mach-imx/mach-imx25.c b/arch/arm/mach-imx/mach-imx25.c
index 32dcb5e99e23..353b86e3808f 100644
--- a/arch/arm/mach-imx/mach-imx25.c
+++ b/arch/arm/mach-imx/mach-imx25.c
@@ -23,6 +23,11 @@ static void __init imx25_init_early(void)
mxc_set_cpu_type(MXC_CPU_MX25);
}
+static void __init imx25_dt_init(void)
+{
+ imx_aips_allow_unprivileged_access("fsl,imx25-aips");
+}
+
static void __init mx25_init_irq(void)
{
struct device_node *np;
@@ -41,6 +46,7 @@ static const char * const imx25_dt_board_compat[] __initconst = {
DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
.init_early = imx25_init_early,
+ .init_machine = imx25_dt_init,
.init_late = imx25_pm_init,
.init_irq = mx25_init_irq,
.dt_compat = imx25_dt_board_compat,
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index 558e5f8589cb..68c3f0799d5b 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -375,6 +375,8 @@ static struct imx_ssi_platform_data mx31_3ds_ssi_pdata = {
/* SPI */
static int spi0_internal_chipselect[] = {
+ MXC_SPI_CS(0),
+ MXC_SPI_CS(1),
MXC_SPI_CS(2),
};
@@ -385,6 +387,7 @@ static const struct spi_imx_master spi0_pdata __initconst = {
static int spi1_internal_chipselect[] = {
MXC_SPI_CS(0),
+ MXC_SPI_CS(1),
MXC_SPI_CS(2),
};
@@ -398,7 +401,7 @@ static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
.modalias = "mc13783",
.max_speed_hz = 1000000,
.bus_num = 1,
- .chip_select = 1, /* SS2 */
+ .chip_select = 2, /* SS2 */
.platform_data = &mc13783_pdata,
/* irq number is run-time assigned */
.mode = SPI_CS_HIGH,
@@ -406,7 +409,7 @@ static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
.modalias = "l4f00242t03",
.max_speed_hz = 5000000,
.bus_num = 0,
- .chip_select = 0, /* SS2 */
+ .chip_select = 2, /* SS2 */
.platform_data = &mx31_3ds_l4f00242t03_pdata,
},
};
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index cc867682520e..bde9a9af6714 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -296,14 +296,14 @@ static struct spi_board_info moboard_spi_board_info[] __initdata = {
/* irq number is run-time assigned */
.max_speed_hz = 300000,
.bus_num = 1,
- .chip_select = 0,
+ .chip_select = 1,
.platform_data = &moboard_pmic,
.mode = SPI_CS_HIGH,
},
};
static int moboard_spi2_cs[] = {
- MXC_SPI_CS(1),
+ MXC_SPI_CS(0), MXC_SPI_CS(1),
};
static const struct spi_imx_master moboard_spi2_pdata __initconst = {
diff --git a/arch/arm/mach-imx/mach-pcm037_eet.c b/arch/arm/mach-imx/mach-pcm037_eet.c
index 8fd8255068ee..95bd97710494 100644
--- a/arch/arm/mach-imx/mach-pcm037_eet.c
+++ b/arch/arm/mach-imx/mach-pcm037_eet.c
@@ -50,13 +50,13 @@ static struct spi_board_info pcm037_spi_dev[] = {
.modalias = "dac124s085",
.max_speed_hz = 400000,
.bus_num = 0,
- .chip_select = 0, /* Index in pcm037_spi1_cs[] */
+ .chip_select = 1, /* Index in pcm037_spi1_cs[] */
.mode = SPI_CPHA,
},
};
/* Platform Data for MXC CSPI */
-static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
+static int pcm037_spi1_cs[] = { MXC_SPI_CS(0), MXC_SPI_CS(1), };
static const struct spi_imx_master pcm037_spi1_pdata __initconst = {
.chipselect = pcm037_spi1_cs,
diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c
index c03bf28d8bbc..78262899a590 100644
--- a/arch/arm/mach-imx/mmdc.c
+++ b/arch/arm/mach-imx/mmdc.c
@@ -1,4 +1,5 @@
/*
+ * Copyright 2017 NXP
* Copyright 2011,2016 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
@@ -47,6 +48,7 @@
#define PROFILE_SEL 0x10
#define MMDC_MADPCR0 0x410
+#define MMDC_MADPCR1 0x414
#define MMDC_MADPSR0 0x418
#define MMDC_MADPSR1 0x41C
#define MMDC_MADPSR2 0x420
@@ -57,6 +59,7 @@
#define MMDC_NUM_COUNTERS 6
#define MMDC_FLAG_PROFILE_SEL 0x1
+#define MMDC_PRF_AXI_ID_CLEAR 0x0
#define to_mmdc_pmu(p) container_of(p, struct mmdc_pmu, pmu)
@@ -87,7 +90,7 @@ static DEFINE_IDA(mmdc_ida);
PMU_EVENT_ATTR_STRING(total-cycles, mmdc_pmu_total_cycles, "event=0x00")
PMU_EVENT_ATTR_STRING(busy-cycles, mmdc_pmu_busy_cycles, "event=0x01")
PMU_EVENT_ATTR_STRING(read-accesses, mmdc_pmu_read_accesses, "event=0x02")
-PMU_EVENT_ATTR_STRING(write-accesses, mmdc_pmu_write_accesses, "config=0x03")
+PMU_EVENT_ATTR_STRING(write-accesses, mmdc_pmu_write_accesses, "event=0x03")
PMU_EVENT_ATTR_STRING(read-bytes, mmdc_pmu_read_bytes, "event=0x04")
PMU_EVENT_ATTR_STRING(read-bytes.unit, mmdc_pmu_read_bytes_unit, "MB");
PMU_EVENT_ATTR_STRING(read-bytes.scale, mmdc_pmu_read_bytes_scale, "0.000001");
@@ -161,8 +164,11 @@ static struct attribute_group mmdc_pmu_events_attr_group = {
};
PMU_FORMAT_ATTR(event, "config:0-63");
+PMU_FORMAT_ATTR(axi_id, "config1:0-63");
+
static struct attribute *mmdc_pmu_format_attrs[] = {
&format_attr_event.attr,
+ &format_attr_axi_id.attr,
NULL,
};
@@ -345,6 +351,14 @@ static void mmdc_pmu_event_start(struct perf_event *event, int flags)
writel(DBG_RST, reg);
+ /*
+ * Write the AXI id parameter to MADPCR1.
+ */
+ val = event->attr.config1;
+ reg = mmdc_base + MMDC_MADPCR1;
+ writel(val, reg);
+
+ reg = mmdc_base + MMDC_MADPCR0;
val = DBG_EN;
if (pmu_mmdc->devtype_data->flags & MMDC_FLAG_PROFILE_SEL)
val |= PROFILE_SEL;
@@ -382,6 +396,10 @@ static void mmdc_pmu_event_stop(struct perf_event *event, int flags)
reg = mmdc_base + MMDC_MADPCR0;
writel(PRF_FRZ, reg);
+
+ reg = mmdc_base + MMDC_MADPCR1;
+ writel(MMDC_PRF_AXI_ID_CLEAR, reg);
+
mmdc_pmu_event_update(event);
}
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index e4f21086b42b..1c6062d240c8 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -419,7 +419,8 @@ static void __init mxs_machine_init(void)
crystalfontz_init();
else if (of_machine_is_compatible("eukrea,mbmx283lc"))
eukrea_mbmx283lc_init();
- else if (of_machine_is_compatible("i2se,duckbill"))
+ else if (of_machine_is_compatible("i2se,duckbill") ||
+ of_machine_is_compatible("i2se,duckbill-2"))
duckbill_init();
else if (of_machine_is_compatible("msr,m28cu3"))
m28cu3_init();
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index ee5460b8ec2e..f1135bf8940e 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -581,7 +581,6 @@ static int omap_pm_enter(suspend_state_t state)
{
switch (state)
{
- case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
omap1_pm_suspend();
break;
diff --git a/arch/arm/mach-omap2/clockdomains81xx_data.c b/arch/arm/mach-omap2/clockdomains81xx_data.c
index 3b5fb05ae701..65fbd136b20c 100644
--- a/arch/arm/mach-omap2/clockdomains81xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains81xx_data.c
@@ -91,6 +91,14 @@ static struct clockdomain default_l3_slow_81xx_clkdm = {
.flags = CLKDM_CAN_SWSUP,
};
+static struct clockdomain default_sata_81xx_clkdm = {
+ .name = "default_clkdm",
+ .pwrdm = { .name = "default_pwrdm" },
+ .cm_inst = TI81XX_CM_DEFAULT_MOD,
+ .clkdm_offs = TI816X_CM_DEFAULT_SATA_CLKDM,
+ .flags = CLKDM_CAN_SWSUP,
+};
+
/* 816x only */
static struct clockdomain alwon_mpu_816x_clkdm = {
@@ -173,6 +181,7 @@ static struct clockdomain *clockdomains_ti814x[] __initdata = {
&mmu_81xx_clkdm,
&mmu_cfg_81xx_clkdm,
&default_l3_slow_81xx_clkdm,
+ &default_sata_81xx_clkdm,
NULL,
};
@@ -200,6 +209,7 @@ static struct clockdomain *clockdomains_ti816x[] __initdata = {
&default_ducati_816x_clkdm,
&default_pci_816x_clkdm,
&default_l3_slow_81xx_clkdm,
+ &default_sata_81xx_clkdm,
NULL,
};
diff --git a/arch/arm/mach-omap2/cm81xx.h b/arch/arm/mach-omap2/cm81xx.h
index 3a0ccf07c76f..5d73a1057c82 100644
--- a/arch/arm/mach-omap2/cm81xx.h
+++ b/arch/arm/mach-omap2/cm81xx.h
@@ -57,5 +57,6 @@
#define TI816X_CM_DEFAULT_PCI_CLKDM 0x0010
#define TI816X_CM_DEFAULT_L3_SLOW_CLKDM 0x0014
#define TI816X_CM_DEFAULT_DUCATI_CLKDM 0x0018
+#define TI816X_CM_DEFAULT_SATA_CLKDM 0x0060
#endif
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 3fdb94599184..473951203104 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -121,7 +121,7 @@ static inline void omap_init_mcspi(void) {}
*
* Bind the RNG hwmod to the RNG omap_device. No return value.
*/
-static void omap_init_rng(void)
+static void __init omap_init_rng(void)
{
struct omap_hwmod *oh;
struct platform_device *pdev;
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 0da4f2ea76c4..8bcea0d83fa0 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -138,7 +138,6 @@
#include <linux/mutex.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
-#include <linux/bootmem.h>
#include <linux/cpu.h>
#include <linux/of.h>
#include <linux/of_address.h>
@@ -216,49 +215,12 @@ static LIST_HEAD(omap_hwmod_list);
/* mpu_oh: used to add/remove MPU initiator from sleepdep list */
static struct omap_hwmod *mpu_oh;
-/*
- * linkspace: ptr to a buffer that struct omap_hwmod_link records are
- * allocated from - used to reduce the number of small memory
- * allocations, which has a significant impact on performance
- */
-static struct omap_hwmod_link *linkspace;
-
-/*
- * free_ls, max_ls: array indexes into linkspace; representing the
- * next free struct omap_hwmod_link index, and the maximum number of
- * struct omap_hwmod_link records allocated (respectively)
- */
-static unsigned short free_ls, max_ls, ls_supp;
-
/* inited: set to true once the hwmod code is initialized */
static bool inited;
/* Private functions */
/**
- * _fetch_next_ocp_if - return the next OCP interface in a list
- * @p: ptr to a ptr to the list_head inside the ocp_if to return
- * @i: pointer to the index of the element pointed to by @p in the list
- *
- * Return a pointer to the struct omap_hwmod_ocp_if record
- * containing the struct list_head pointed to by @p, and increment
- * @p such that a future call to this routine will return the next
- * record.
- */
-static struct omap_hwmod_ocp_if *_fetch_next_ocp_if(struct list_head **p,
- int *i)
-{
- struct omap_hwmod_ocp_if *oi;
-
- oi = list_entry(*p, struct omap_hwmod_link, node)->ocp_if;
- *p = (*p)->next;
-
- *i = *i + 1;
-
- return oi;
-}
-
-/**
* _update_sysc_cache - return the module OCP_SYSCONFIG register, keep copy
* @oh: struct omap_hwmod *
*
@@ -794,15 +756,10 @@ static int _init_main_clk(struct omap_hwmod *oh)
static int _init_interface_clks(struct omap_hwmod *oh)
{
struct omap_hwmod_ocp_if *os;
- struct list_head *p;
struct clk *c;
- int i = 0;
int ret = 0;
- p = oh->slave_ports.next;
-
- while (i < oh->slaves_cnt) {
- os = _fetch_next_ocp_if(&p, &i);
+ list_for_each_entry(os, &oh->slave_ports, node) {
if (!os->clk)
continue;
@@ -905,19 +862,13 @@ static void _disable_optional_clocks(struct omap_hwmod *oh)
static int _enable_clocks(struct omap_hwmod *oh)
{
struct omap_hwmod_ocp_if *os;
- struct list_head *p;
- int i = 0;
pr_debug("omap_hwmod: %s: enabling clocks\n", oh->name);
if (oh->_clk)
clk_enable(oh->_clk);
- p = oh->slave_ports.next;
-
- while (i < oh->slaves_cnt) {
- os = _fetch_next_ocp_if(&p, &i);
-
+ list_for_each_entry(os, &oh->slave_ports, node) {
if (os->_clk && (os->flags & OCPIF_SWSUP_IDLE))
clk_enable(os->_clk);
}
@@ -939,19 +890,13 @@ static int _enable_clocks(struct omap_hwmod *oh)
static int _disable_clocks(struct omap_hwmod *oh)
{
struct omap_hwmod_ocp_if *os;
- struct list_head *p;
- int i = 0;
pr_debug("omap_hwmod: %s: disabling clocks\n", oh->name);
if (oh->_clk)
clk_disable(oh->_clk);
- p = oh->slave_ports.next;
-
- while (i < oh->slaves_cnt) {
- os = _fetch_next_ocp_if(&p, &i);
-
+ list_for_each_entry(os, &oh->slave_ports, node) {
if (os->_clk && (os->flags & OCPIF_SWSUP_IDLE))
clk_disable(os->_clk);
}
@@ -1190,16 +1135,11 @@ static int _get_sdma_req_by_name(struct omap_hwmod *oh, const char *name,
static int _get_addr_space_by_name(struct omap_hwmod *oh, const char *name,
u32 *pa_start, u32 *pa_end)
{
- int i, j;
+ int j;
struct omap_hwmod_ocp_if *os;
- struct list_head *p = NULL;
bool found = false;
- p = oh->slave_ports.next;
-
- i = 0;
- while (i < oh->slaves_cnt) {
- os = _fetch_next_ocp_if(&p, &i);
+ list_for_each_entry(os, &oh->slave_ports, node) {
if (!os->addr)
return -ENOENT;
@@ -1239,18 +1179,13 @@ static int _get_addr_space_by_name(struct omap_hwmod *oh, const char *name,
static void __init _save_mpu_port_index(struct omap_hwmod *oh)
{
struct omap_hwmod_ocp_if *os = NULL;
- struct list_head *p;
- int i = 0;
if (!oh)
return;
oh->_int_flags |= _HWMOD_NO_MPU_PORT;
- p = oh->slave_ports.next;
-
- while (i < oh->slaves_cnt) {
- os = _fetch_next_ocp_if(&p, &i);
+ list_for_each_entry(os, &oh->slave_ports, node) {
if (os->user & OCP_USER_MPU) {
oh->_mpu_port = os;
oh->_int_flags &= ~_HWMOD_NO_MPU_PORT;
@@ -1393,7 +1328,7 @@ static void _enable_sysc(struct omap_hwmod *oh)
*/
if ((oh->flags & HWMOD_SET_DEFAULT_CLOCKACT) &&
(sf & SYSC_HAS_CLOCKACTIVITY))
- _set_clockactivity(oh, oh->class->sysc->clockact, &v);
+ _set_clockactivity(oh, CLOCKACT_TEST_ICLK, &v);
_write_sysconfig(v, oh);
@@ -2092,7 +2027,7 @@ static int _enable(struct omap_hwmod *oh)
r = (soc_ops.wait_target_ready) ? soc_ops.wait_target_ready(oh) :
-EINVAL;
- if (oh->clkdm)
+ if (oh->clkdm && !(oh->flags & HWMOD_CLKDM_NOAUTO))
clkdm_allow_idle(oh->clkdm);
if (!r) {
@@ -2149,7 +2084,12 @@ static int _idle(struct omap_hwmod *oh)
_idle_sysc(oh);
_del_initiator_dep(oh, mpu_oh);
- if (oh->clkdm)
+ /*
+ * If HWMOD_CLKDM_NOAUTO is set then we don't
+ * deny idle the clkdm again since idle was already denied
+ * in _enable()
+ */
+ if (oh->clkdm && !(oh->flags & HWMOD_CLKDM_NOAUTO))
clkdm_deny_idle(oh->clkdm);
if (oh->flags & HWMOD_BLOCK_WFI)
@@ -2451,15 +2391,11 @@ static int __init _init(struct omap_hwmod *oh, void *data)
static void __init _setup_iclk_autoidle(struct omap_hwmod *oh)
{
struct omap_hwmod_ocp_if *os;
- struct list_head *p;
- int i = 0;
+
if (oh->_state != _HWMOD_STATE_INITIALIZED)
return;
- p = oh->slave_ports.next;
-
- while (i < oh->slaves_cnt) {
- os = _fetch_next_ocp_if(&p, &i);
+ list_for_each_entry(os, &oh->slave_ports, node) {
if (!os->_clk)
continue;
@@ -2657,7 +2593,6 @@ static int __init _register(struct omap_hwmod *oh)
list_add_tail(&oh->node, &omap_hwmod_list);
- INIT_LIST_HEAD(&oh->master_ports);
INIT_LIST_HEAD(&oh->slave_ports);
spin_lock_init(&oh->_lock);
lockdep_set_class(&oh->_lock, &oh->hwmod_key);
@@ -2675,49 +2610,10 @@ static int __init _register(struct omap_hwmod *oh)
}
/**
- * _alloc_links - return allocated memory for hwmod links
- * @ml: pointer to a struct omap_hwmod_link * for the master link
- * @sl: pointer to a struct omap_hwmod_link * for the slave link
- *
- * Return pointers to two struct omap_hwmod_link records, via the
- * addresses pointed to by @ml and @sl. Will first attempt to return
- * memory allocated as part of a large initial block, but if that has
- * been exhausted, will allocate memory itself. Since ideally this
- * second allocation path will never occur, the number of these
- * 'supplemental' allocations will be logged when debugging is
- * enabled. Returns 0.
- */
-static int __init _alloc_links(struct omap_hwmod_link **ml,
- struct omap_hwmod_link **sl)
-{
- unsigned int sz;
-
- if ((free_ls + LINKS_PER_OCP_IF) <= max_ls) {
- *ml = &linkspace[free_ls++];
- *sl = &linkspace[free_ls++];
- return 0;
- }
-
- sz = sizeof(struct omap_hwmod_link) * LINKS_PER_OCP_IF;
-
- *sl = NULL;
- *ml = memblock_virt_alloc(sz, 0);
-
- *sl = (void *)(*ml) + sizeof(struct omap_hwmod_link);
-
- ls_supp++;
- pr_debug("omap_hwmod: supplemental link allocations needed: %d\n",
- ls_supp * LINKS_PER_OCP_IF);
-
- return 0;
-};
-
-/**
* _add_link - add an interconnect between two IP blocks
* @oi: pointer to a struct omap_hwmod_ocp_if record
*
- * Add struct omap_hwmod_link records connecting the master IP block
- * specified in @oi->master to @oi, and connecting the slave IP block
+ * Add struct omap_hwmod_link records connecting the slave IP block
* specified in @oi->slave to @oi. This code is assumed to run before
* preemption or SMP has been enabled, thus avoiding the need for
* locking in this code. Changes to this assumption will require
@@ -2725,19 +2621,10 @@ static int __init _alloc_links(struct omap_hwmod_link **ml,
*/
static int __init _add_link(struct omap_hwmod_ocp_if *oi)
{
- struct omap_hwmod_link *ml, *sl;
-
pr_debug("omap_hwmod: %s -> %s: adding link\n", oi->master->name,
oi->slave->name);
- _alloc_links(&ml, &sl);
-
- ml->ocp_if = oi;
- list_add(&ml->node, &oi->master->master_ports);
- oi->master->masters_cnt++;
-
- sl->ocp_if = oi;
- list_add(&sl->node, &oi->slave->slave_ports);
+ list_add(&oi->node, &oi->slave->slave_ports);
oi->slave->slaves_cnt++;
return 0;
@@ -2784,45 +2671,6 @@ static int __init _register_link(struct omap_hwmod_ocp_if *oi)
return 0;
}
-/**
- * _alloc_linkspace - allocate large block of hwmod links
- * @ois: pointer to an array of struct omap_hwmod_ocp_if records to count
- *
- * Allocate a large block of struct omap_hwmod_link records. This
- * improves boot time significantly by avoiding the need to allocate
- * individual records one by one. If the number of records to
- * allocate in the block hasn't been manually specified, this function
- * will count the number of struct omap_hwmod_ocp_if records in @ois
- * and use that to determine the allocation size. For SoC families
- * that require multiple list registrations, such as OMAP3xxx, this
- * estimation process isn't optimal, so manual estimation is advised
- * in those cases. Returns -EEXIST if the allocation has already occurred
- * or 0 upon success.
- */
-static int __init _alloc_linkspace(struct omap_hwmod_ocp_if **ois)
-{
- unsigned int i = 0;
- unsigned int sz;
-
- if (linkspace) {
- WARN(1, "linkspace already allocated\n");
- return -EEXIST;
- }
-
- if (max_ls == 0)
- while (ois[i++])
- max_ls += LINKS_PER_OCP_IF;
-
- sz = sizeof(struct omap_hwmod_link) * max_ls;
-
- pr_debug("omap_hwmod: %s: allocating %d byte linkspace (%d links)\n",
- __func__, sz, max_ls);
-
- linkspace = memblock_virt_alloc(sz, 0);
-
- return 0;
-}
-
/* Static functions intended only for use in soc_ops field function pointers */
/**
@@ -3180,13 +3028,6 @@ int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois)
if (ois[0] == NULL) /* Empty list */
return 0;
- if (!linkspace) {
- if (_alloc_linkspace(ois)) {
- pr_err("omap_hwmod: could not allocate link space\n");
- return -ENOMEM;
- }
- }
-
i = 0;
do {
r = _register_link(ois[i]);
@@ -3398,14 +3239,10 @@ int omap_hwmod_count_resources(struct omap_hwmod *oh, unsigned long flags)
ret += _count_sdma_reqs(oh);
if (flags & IORESOURCE_MEM) {
- int i = 0;
struct omap_hwmod_ocp_if *os;
- struct list_head *p = oh->slave_ports.next;
- while (i < oh->slaves_cnt) {
- os = _fetch_next_ocp_if(&p, &i);
+ list_for_each_entry(os, &oh->slave_ports, node)
ret += _count_ocp_if_addr_spaces(os);
- }
}
return ret;
@@ -3424,7 +3261,6 @@ int omap_hwmod_count_resources(struct omap_hwmod *oh, unsigned long flags)
int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
{
struct omap_hwmod_ocp_if *os;
- struct list_head *p;
int i, j, mpu_irqs_cnt, sdma_reqs_cnt, addr_cnt;
int r = 0;
@@ -3454,11 +3290,7 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
r++;
}
- p = oh->slave_ports.next;
-
- i = 0;
- while (i < oh->slaves_cnt) {
- os = _fetch_next_ocp_if(&p, &i);
+ list_for_each_entry(os, &oh->slave_ports, node) {
addr_cnt = _count_ocp_if_addr_spaces(os);
for (j = 0; j < addr_cnt; j++) {
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index 78904017f18c..a8f779381fd8 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -313,6 +313,7 @@ struct omap_hwmod_ocp_if {
struct omap_hwmod_addr_space *addr;
const char *clk;
struct clk *_clk;
+ struct list_head node;
union {
struct omap_hwmod_omap2_firewall omap2;
} fw;
@@ -410,7 +411,6 @@ struct omap_hwmod_class_sysconfig {
struct omap_hwmod_sysc_fields *sysc_fields;
u8 srst_udelay;
u8 idlemodes;
- u8 clockact;
};
/**
@@ -531,6 +531,10 @@ struct omap_hwmod_omap4_prcm {
* operate and they need to be handled at the same time as the main_clk.
* HWMOD_NO_IDLE: Do not idle the hwmod at all. Useful to handle certain
* IPs like CPSW on DRA7, where clocks to this module cannot be disabled.
+ * HWMOD_CLKDM_NOAUTO: Allows the hwmod's clockdomain to be prevented from
+ * entering HW_AUTO while hwmod is active. This is needed to workaround
+ * some modules which don't function correctly with HW_AUTO. For example,
+ * DCAN on DRA7x SoC needs this to workaround errata i893.
*/
#define HWMOD_SWSUP_SIDLE (1 << 0)
#define HWMOD_SWSUP_MSTANDBY (1 << 1)
@@ -548,6 +552,7 @@ struct omap_hwmod_omap4_prcm {
#define HWMOD_RECONFIG_IO_CHAIN (1 << 13)
#define HWMOD_OPT_CLKS_NEEDED (1 << 14)
#define HWMOD_NO_IDLE (1 << 15)
+#define HWMOD_CLKDM_NOAUTO (1 << 16)
/*
* omap_hwmod._int_flags definitions
@@ -617,16 +622,6 @@ struct omap_hwmod_class {
};
/**
- * struct omap_hwmod_link - internal structure linking hwmods with ocp_ifs
- * @ocp_if: OCP interface structure record pointer
- * @node: list_head pointing to next struct omap_hwmod_link in a list
- */
-struct omap_hwmod_link {
- struct omap_hwmod_ocp_if *ocp_if;
- struct list_head node;
-};
-
-/**
* struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks)
* @name: name of the hwmod
* @class: struct omap_hwmod_class * to the class of this hwmod
@@ -686,9 +681,8 @@ struct omap_hwmod {
const char *main_clk;
struct clk *_clk;
struct omap_hwmod_opt_clk *opt_clks;
- char *clkdm_name;
+ const char *clkdm_name;
struct clockdomain *clkdm;
- struct list_head master_ports; /* connect to *_IA */
struct list_head slave_ports; /* connect to *_TA */
void *dev_attr;
u32 _sysc_cache;
@@ -698,12 +692,11 @@ struct omap_hwmod {
struct list_head node;
struct omap_hwmod_ocp_if *_mpu_port;
unsigned int (*xlate_irq)(unsigned int);
- u16 flags;
+ u32 flags;
u8 mpu_rt_idx;
u8 response_lat;
u8 rst_lines_cnt;
u8 opt_clks_cnt;
- u8 masters_cnt;
u8 slaves_cnt;
u8 hwmods_cnt;
u8 _int_flags;
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index e047033caa3e..d190f1ad97b7 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -55,7 +55,6 @@ static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = {
SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .clockact = CLOCKACT_TEST_ICLK,
.sysc_fields = &omap_hwmod_sysc_type1,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 1435fee39a89..1c6ca4d5fa2d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -149,7 +149,6 @@ static struct omap_hwmod_class_sysconfig omap3xxx_timer_sysc = {
SYSC_HAS_EMUFREE | SYSC_HAS_AUTOIDLE |
SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .clockact = CLOCKACT_TEST_ICLK,
.sysc_fields = &omap_hwmod_sysc_type1,
};
@@ -424,7 +423,6 @@ static struct omap_hwmod_class_sysconfig i2c_sysc = {
SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .clockact = CLOCKACT_TEST_ICLK,
.sysc_fields = &omap_hwmod_sysc_type1,
};
@@ -1045,7 +1043,6 @@ static struct omap_hwmod_class_sysconfig omap3xxx_mcbsp_sysc = {
SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
- .clockact = 0x2,
};
static struct omap_hwmod_class omap3xxx_mcbsp_hwmod_class = {
@@ -1210,7 +1207,6 @@ static struct omap_hwmod_sysc_fields omap34xx_sr_sysc_fields = {
static struct omap_hwmod_class_sysconfig omap34xx_sr_sysc = {
.sysc_offs = 0x24,
.sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_NO_CACHE),
- .clockact = CLOCKACT_TEST_ICLK,
.sysc_fields = &omap34xx_sr_sysc_fields,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index dad871a4cd96..94f09c720f29 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -1320,7 +1320,6 @@ static struct omap_hwmod_class_sysconfig omap44xx_i2c_sysc = {
SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP),
- .clockact = CLOCKACT_TEST_ICLK,
.sysc_fields = &omap_hwmod_sysc_type1,
};
@@ -2548,7 +2547,6 @@ static struct omap_hwmod_class_sysconfig omap44xx_timer_1ms_sysc = {
SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .clockact = CLOCKACT_TEST_ICLK,
.sysc_fields = &omap_hwmod_sysc_type1,
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index a2d763a4cc57..9a67f013ebad 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -839,7 +839,6 @@ static struct omap_hwmod_class_sysconfig omap54xx_i2c_sysc = {
SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP),
- .clockact = CLOCKACT_TEST_ICLK,
.sysc_fields = &omap_hwmod_sysc_type1,
};
@@ -1530,7 +1529,6 @@ static struct omap_hwmod_class_sysconfig omap54xx_timer_1ms_sysc = {
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP),
.sysc_fields = &omap_hwmod_sysc_type2,
- .clockact = CLOCKACT_TEST_ICLK,
};
static struct omap_hwmod_class omap54xx_timer_1ms_hwmod_class = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index d0585293a381..b3abb8d8b2f6 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -359,6 +359,7 @@ static struct omap_hwmod dra7xx_dcan1_hwmod = {
.class = &dra7xx_dcan_hwmod_class,
.clkdm_name = "wkupaon_clkdm",
.main_clk = "dcan1_sys_clk_mux",
+ .flags = HWMOD_CLKDM_NOAUTO,
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_WKUPAON_DCAN1_CLKCTRL_OFFSET,
@@ -374,6 +375,7 @@ static struct omap_hwmod dra7xx_dcan2_hwmod = {
.class = &dra7xx_dcan_hwmod_class,
.clkdm_name = "l4per2_clkdm",
.main_clk = "sys_clkin1",
+ .flags = HWMOD_CLKDM_NOAUTO,
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L4PER2_DCAN2_CLKCTRL_OFFSET,
@@ -1098,7 +1100,6 @@ static struct omap_hwmod_class_sysconfig dra7xx_i2c_sysc = {
SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP),
- .clockact = CLOCKACT_TEST_ICLK,
.sysc_fields = &omap_hwmod_sysc_type1,
};
@@ -2700,6 +2701,7 @@ static struct omap_hwmod dra7xx_usb_otg_ss1_hwmod = {
.class = &dra7xx_usb_otg_ss_hwmod_class,
.clkdm_name = "l3init_clkdm",
.main_clk = "dpll_core_h13x2_ck",
+ .flags = HWMOD_CLKDM_NOAUTO,
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L3INIT_USB_OTG_SS1_CLKCTRL_OFFSET,
@@ -2721,6 +2723,7 @@ static struct omap_hwmod dra7xx_usb_otg_ss2_hwmod = {
.class = &dra7xx_usb_otg_ss_hwmod_class,
.clkdm_name = "l3init_clkdm",
.main_clk = "dpll_core_h13x2_ck",
+ .flags = HWMOD_CLKDM_NOAUTO,
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L3INIT_USB_OTG_SS2_CLKCTRL_OFFSET,
diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
index b82b77cff24c..310afe474ec4 100644
--- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
@@ -106,6 +106,7 @@
*/
#define DM81XX_CM_DEFAULT_OFFSET 0x500
#define DM81XX_CM_DEFAULT_USB_CLKCTRL (0x558 - DM81XX_CM_DEFAULT_OFFSET)
+#define DM81XX_CM_DEFAULT_SATA_CLKCTRL (0x560 - DM81XX_CM_DEFAULT_OFFSET)
/* L3 Interconnect entries clocked at 125, 250 and 500MHz */
static struct omap_hwmod dm81xx_alwon_l3_slow_hwmod = {
@@ -973,6 +974,38 @@ static struct omap_hwmod_ocp_if dm816x_l4_hs__emac1 = {
.user = OCP_USER_MPU,
};
+static struct omap_hwmod_class_sysconfig dm81xx_sata_sysc = {
+ .sysc_offs = 0x1100,
+ .sysc_flags = SYSC_HAS_SIDLEMODE,
+ .idlemodes = SIDLE_FORCE,
+ .sysc_fields = &omap_hwmod_sysc_type3,
+};
+
+static struct omap_hwmod_class dm81xx_sata_hwmod_class = {
+ .name = "sata",
+ .sysc = &dm81xx_sata_sysc,
+};
+
+static struct omap_hwmod dm81xx_sata_hwmod = {
+ .name = "sata",
+ .clkdm_name = "default_sata_clkdm",
+ .flags = HWMOD_NO_IDLEST,
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DM81XX_CM_DEFAULT_SATA_CLKCTRL,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+ .class = &dm81xx_sata_hwmod_class,
+};
+
+static struct omap_hwmod_ocp_if dm81xx_l4_hs__sata = {
+ .master = &dm81xx_l4_hs_hwmod,
+ .slave = &dm81xx_sata_hwmod,
+ .clk = "sysclk5_ck",
+ .user = OCP_USER_MPU,
+};
+
static struct omap_hwmod_class_sysconfig dm81xx_mmc_sysc = {
.rev_offs = 0x0,
.sysc_offs = 0x110,
@@ -1474,6 +1507,7 @@ static struct omap_hwmod_ocp_if *dm816x_hwmod_ocp_ifs[] __initdata = {
&dm81xx_l4_hs__emac0,
&dm81xx_emac0__mdio,
&dm816x_l4_hs__emac1,
+ &dm81xx_l4_hs__sata,
&dm81xx_alwon_l3_fast__tpcc,
&dm81xx_alwon_l3_fast__tptc0,
&dm81xx_alwon_l3_fast__tptc1,
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 0598630c1778..63027e60cc20 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -163,7 +163,6 @@ static int omap_pm_enter(suspend_state_t suspend_state)
return -ENOENT; /* XXX doublecheck */
switch (suspend_state) {
- case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
ret = omap_pm_suspend();
break;
diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig
new file mode 100644
index 000000000000..2d1419eb0896
--- /dev/null
+++ b/arch/arm/mach-stm32/Kconfig
@@ -0,0 +1,26 @@
+config ARCH_STM32
+ bool "STMicrolectronics STM32"
+ depends on ARM_SINGLE_ARMV7M
+ select ARCH_HAS_RESET_CONTROLLER
+ select ARMV7M_SYSTICK
+ select CLKSRC_STM32
+ select PINCTRL
+ select RESET_CONTROLLER
+ select STM32_EXTI
+ help
+ Support for STMicroelectronics STM32 processors.
+
+config MACH_STM32F429
+ bool "STMicrolectronics STM32F429"
+ depends on ARCH_STM32
+ default y
+
+config MACH_STM32F746
+ bool "STMicrolectronics STM32F746"
+ depends on ARCH_STM32
+ default y
+
+config MACH_STM32H743
+ bool "STMicrolectronics STM32H743"
+ depends on ARCH_STM32
+ default y
diff --git a/arch/arm/mach-stm32/board-dt.c b/arch/arm/mach-stm32/board-dt.c
index c354222a4158..e918686e4191 100644
--- a/arch/arm/mach-stm32/board-dt.c
+++ b/arch/arm/mach-stm32/board-dt.c
@@ -12,6 +12,7 @@ static const char *const stm32_compat[] __initconst = {
"st,stm32f429",
"st,stm32f469",
"st,stm32f746",
+ "st,stm32h743",
NULL
};
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index b9863f9a35fa..58153cdf025b 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -6,6 +6,7 @@ menuconfig ARCH_SUNXI
select GENERIC_IRQ_CHIP
select GPIOLIB
select PINCTRL
+ select PM_OPP
select SUN4I_TIMER
select RESET_CONTROLLER