diff options
Diffstat (limited to 'arch/arm')
34 files changed, 280 insertions, 289 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index afe0f4d9ffd6..ba8514468df8 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -607,6 +607,14 @@ choice when u-boot hands over to the kernel, the system silently crashes, with no serial output at all. + config DEBUG_MSTARV7_PMUART + bool "Kernel low-level debugging messages via MSTARV7 PM UART" + depends on ARCH_MSTARV7 + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + for MSTAR ARMv7-based platforms on PM UART. + config DEBUG_MT6589_UART0 bool "Mediatek mt6589 UART0" depends on ARCH_MEDIATEK @@ -1605,6 +1613,7 @@ config DEBUG_UART_PHYS default 0x18000400 if DEBUG_BCM_HR2 default 0x18023000 if DEBUG_BCM_IPROC_UART3 default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1 + default 0x1f221000 if DEBUG_MSTARV7_PMUART default 0x20001000 if DEBUG_HIP01_UART default 0x20060000 if DEBUG_RK29_UART0 default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 @@ -1722,6 +1731,7 @@ config DEBUG_UART_VIRT default 0xf0100000 if DEBUG_DIGICOLOR_UA0 default 0xf01fb000 if DEBUG_NOMADIK_UART default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836 + default 0xf0221000 if DEBUG_MSTARV7_PMUART default 0xf1000300 if DEBUG_BCM_5301X default 0xf1000400 if DEBUG_BCM_HR2 default 0xf1002000 if DEBUG_MT8127_UART0 @@ -1827,6 +1837,7 @@ config DEBUG_UART_8250_SHIFT default 0 if DEBUG_FOOTBRIDGE_COM1 || ARCH_IOP32X || DEBUG_BCM_5301X || \ DEBUG_BCM_HR2 || DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || \ DEBUG_OMAP7XXUART3 + default 3 if DEBUG_MSTARV7_PMUART default 2 config DEBUG_UART_8250_WORD diff --git a/arch/arm/boot/dts/am5718.dtsi b/arch/arm/boot/dts/am5718.dtsi index ebf4d3cc1cfb..6d7530a48c73 100644 --- a/arch/arm/boot/dts/am5718.dtsi +++ b/arch/arm/boot/dts/am5718.dtsi @@ -17,17 +17,13 @@ * VCP1, VCP2 * MLB * ISS - * USB3, USB4 + * USB3 */ &usb3_tm { status = "disabled"; }; -&usb4_tm { - status = "disabled"; -}; - &atl_tm { status = "disabled"; }; diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index 149144cdff35..648d23f7f748 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -4129,28 +4129,6 @@ }; }; - usb4_tm: target-module@140000 { /* 0x48940000, ap 75 3c.0 */ - compatible = "ti,sysc-omap4", "ti,sysc"; - reg = <0x140000 0x4>, - <0x140010 0x4>; - reg-names = "rev", "sysc"; - ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>; - ti,sysc-midle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - /* Domains (P, C): l3init_pwrdm, l3init_clkdm */ - clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS4_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x140000 0x20000>; - }; - target-module@170000 { /* 0x48970000, ap 21 0a.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; reg = <0x170010 0x4>; diff --git a/arch/arm/boot/dts/dra71x.dtsi b/arch/arm/boot/dts/dra71x.dtsi index cad0e4a2bd8d..9c270d8f75d5 100644 --- a/arch/arm/boot/dts/dra71x.dtsi +++ b/arch/arm/boot/dts/dra71x.dtsi @@ -11,7 +11,3 @@ &rtctarget { status = "disabled"; }; - -&usb4_tm { - status = "disabled"; -}; diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi index d403acc754b6..f3e934ef7d3e 100644 --- a/arch/arm/boot/dts/dra72x.dtsi +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -108,7 +108,3 @@ &pcie2_rc { compatible = "ti,dra726-pcie-rc", "ti,dra7-pcie"; }; - -&usb4_tm { - status = "disabled"; -}; diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index e1850d6c841a..b4e07d99ffde 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -49,49 +49,6 @@ reg = <0x41500000 0x100>; }; - target-module@48940000 { - compatible = "ti,sysc-omap4", "ti,sysc"; - reg = <0x48940000 0x4>, - <0x48940010 0x4>; - reg-names = "rev", "sysc"; - ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>; - ti,sysc-midle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS4_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x48940000 0x20000>; - - omap_dwc3_4: omap_dwc3_4@0 { - compatible = "ti,dwc3"; - reg = <0 0x10000>; - interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <1>; - utmi-mode = <2>; - ranges; - status = "disabled"; - usb4: usb@10000 { - compatible = "snps,dwc3"; - reg = <0x10000 0x17000>; - interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "peripheral", - "host", - "otg"; - maximum-speed = "high-speed"; - dr_mode = "otg"; - }; - }; - }; target-module@41501000 { compatible = "ti,sysc-omap2", "ti,sysc"; @@ -224,3 +181,52 @@ &pcie2_rc { compatible = "ti,dra746-pcie-rc", "ti,dra7-pcie"; }; + +&l4_per3 { + segment@0 { + usb4_tm: target-module@140000 { /* 0x48940000, ap 75 3c.0 */ + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x140000 0x4>, + <0x140010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + /* Domains (P, C): l3init_pwrdm, l3init_clkdm */ + clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS4_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x140000 0x20000>; + + omap_dwc3_4: omap_dwc3_4@0 { + compatible = "ti,dwc3"; + reg = <0 0x10000>; + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges; + status = "disabled"; + usb4: usb@10000 { + compatible = "snps,dwc3"; + reg = <0x10000 0x17000>; + interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "peripheral", + "host", + "otg"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + }; + }; + }; + }; +}; diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 25b01da4771b..8b48326be9fd 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -55,6 +55,7 @@ void __init exynos_sysram_init(void) sysram_base_addr = of_iomap(node, 0); sysram_base_phys = of_translate_address(node, of_get_address(node, 0, NULL, NULL)); + of_node_put(node); break; } @@ -62,6 +63,7 @@ void __init exynos_sysram_init(void) if (!of_device_is_available(node)) continue; sysram_ns_base_addr = of_iomap(node, 0); + of_node_put(node); break; } } diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 9cebd360d58e..d1506ef7a537 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -35,7 +35,7 @@ obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o obj-$(CONFIG_HAVE_IMX_SRC) += src.o -ifneq ($(CONFIG_SOC_IMX6)$(CONFIG_SOC_LS1021A),) +ifneq ($(CONFIG_SOC_IMX6)$(CONFIG_SOC_IMX7D_CA7)$(CONFIG_SOC_LS1021A),) AFLAGS_headsmp.o :=-Wa,-march=armv7-a obj-$(CONFIG_SMP) += headsmp.o platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 474dedb73bc7..f0a073a71401 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -68,11 +68,13 @@ void imx_set_cpu_arg(int cpu, u32 arg); void v7_secondary_startup(void); void imx_scu_map_io(void); void imx_smp_prepare(void); +void imx_gpcv2_set_core1_pdn_pup_by_software(bool pdn); #else static inline void imx_scu_map_io(void) {} static inline void imx_smp_prepare(void) {} #endif void imx_src_init(void); +void imx7_src_init(void); void imx_gpc_pre_suspend(bool arm_power_off); void imx_gpc_post_resume(void); void imx_gpc_mask_all(void); @@ -131,6 +133,7 @@ static inline void imx_init_l2cache(void) {} #endif extern const struct smp_operations imx_smp_ops; +extern const struct smp_operations imx7_smp_ops; extern const struct smp_operations ls1021a_smp_ops; #endif diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S index 766dbdb2ae27..fcba58be8e79 100644 --- a/arch/arm/mach-imx/headsmp.S +++ b/arch/arm/mach-imx/headsmp.S @@ -21,6 +21,15 @@ diag_reg_offset: ENTRY(v7_secondary_startup) ARM_BE8(setend be) @ go BE8 if entered LE + mrc p15, 0, r0, c0, c0, 0 + lsl r0, r0, #16 + lsr r0, r0, #20 + /* 0xc07 is cortex A7's ID */ + mov r1, #0xc00 + orr r1, #0x7 + cmp r0, r1 + beq secondary_startup + set_diag_reg b secondary_startup ENDPROC(v7_secondary_startup) diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 82e22398d43d..e24a46dc5703 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -11,6 +11,7 @@ #include <asm/proc-fns.h> #include "common.h" +#include "hardware.h" /* * platform-specific code to shutdown a CPU @@ -40,5 +41,7 @@ int imx_cpu_kill(unsigned int cpu) return 0; imx_enable_cpu(cpu, false); imx_set_cpu_arg(cpu, 0); + if (cpu_is_imx7d()) + imx_gpcv2_set_core1_pdn_pup_by_software(true); return 1; } diff --git a/arch/arm/mach-imx/mach-imx50.c b/arch/arm/mach-imx/mach-imx50.c index f4da205f57db..a2d35f9ba474 100644 --- a/arch/arm/mach-imx/mach-imx50.c +++ b/arch/arm/mach-imx/mach-imx50.c @@ -9,6 +9,12 @@ #include <asm/mach/arch.h> #include "common.h" +#include "hardware.h" + +static void __init imx50_init_early(void) +{ + mxc_set_cpu_type(MXC_CPU_MX50); +} static const char * const imx50_dt_board_compat[] __initconst = { "fsl,imx50", @@ -16,5 +22,6 @@ static const char * const imx50_dt_board_compat[] __initconst = { }; DT_MACHINE_START(IMX50_DT, "Freescale i.MX50 (Device Tree Support)") + .init_early = imx50_init_early, .dt_compat = imx50_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 703998ebb52e..11dcc369ec14 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -40,27 +40,6 @@ static int ksz9021rn_phy_fixup(struct phy_device *phydev) return 0; } -static void mmd_write_reg(struct phy_device *dev, int device, int reg, int val) -{ - phy_write(dev, 0x0d, device); - phy_write(dev, 0x0e, reg); - phy_write(dev, 0x0d, (1 << 14) | device); - phy_write(dev, 0x0e, val); -} - -static int ksz9031rn_phy_fixup(struct phy_device *dev) -{ - /* - * min rx data delay, max rx/tx clock delay, - * min rx/tx control delay - */ - mmd_write_reg(dev, 2, 4, 0); - mmd_write_reg(dev, 2, 5, 0); - mmd_write_reg(dev, 2, 8, 0x003ff); - - return 0; -} - /* * fixup for PLX PEX8909 bridge to configure GPIO1-7 as output High * as they are used for slots1-7 PERST# @@ -89,75 +68,11 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8609, ventana_pciesw_early_fixup); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8606, ventana_pciesw_early_fixup); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8604, ventana_pciesw_early_fixup); -static int ar8031_phy_fixup(struct phy_device *dev) -{ - u16 val; - - /* To enable AR8031 output a 125MHz clk from CLK_25M */ - phy_write(dev, 0xd, 0x7); - phy_write(dev, 0xe, 0x8016); - phy_write(dev, 0xd, 0x4007); - - val = phy_read(dev, 0xe); - val &= 0xffe3; - val |= 0x18; - phy_write(dev, 0xe, val); - - /* introduce tx clock delay */ - phy_write(dev, 0x1d, 0x5); - val = phy_read(dev, 0x1e); - val |= 0x0100; - phy_write(dev, 0x1e, val); - - return 0; -} - -#define PHY_ID_AR8031 0x004dd074 - -static int ar8035_phy_fixup(struct phy_device *dev) -{ - u16 val; - - /* Ar803x phy SmartEEE feature cause link status generates glitch, - * which cause ethernet link down/up issue, so disable SmartEEE - */ - phy_write(dev, 0xd, 0x3); - phy_write(dev, 0xe, 0x805d); - phy_write(dev, 0xd, 0x4003); - - val = phy_read(dev, 0xe); - phy_write(dev, 0xe, val & ~(1 << 8)); - - /* - * Enable 125MHz clock from CLK_25M on the AR8031. This - * is fed in to the IMX6 on the ENET_REF_CLK (V22) pad. - * Also, introduce a tx clock delay. - * - * This is the same as is the AR8031 fixup. - */ - ar8031_phy_fixup(dev); - - /*check phy power*/ - val = phy_read(dev, 0x0); - if (val & BMCR_PDOWN) - phy_write(dev, 0x0, val & ~BMCR_PDOWN); - - return 0; -} - -#define PHY_ID_AR8035 0x004dd072 - static void __init imx6q_enet_phy_init(void) { if (IS_BUILTIN(CONFIG_PHYLIB)) { phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, ksz9021rn_phy_fixup); - phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK, - ksz9031rn_phy_fixup); - phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffef, - ar8031_phy_fixup); - phy_register_fixup_for_uid(PHY_ID_AR8035, 0xffffffef, - ar8035_phy_fixup); } } @@ -257,9 +172,6 @@ static void __init imx6q_init_machine(void) imx_get_soc_revision()); imx6q_enet_phy_init(); - - of_platform_default_populate(NULL, NULL, NULL); - imx_anatop_init(); cpu_is_imx6q() ? imx6q_pm_init() : imx6dl_pm_init(); imx6q_1588_init(); diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c index 781e2a94fdd7..e65ed5218f53 100644 --- a/arch/arm/mach-imx/mach-imx6sx.c +++ b/arch/arm/mach-imx/mach-imx6sx.c @@ -15,31 +15,6 @@ #include "common.h" #include "cpuidle.h" -static int ar8031_phy_fixup(struct phy_device *dev) -{ - u16 val; - - /* Set RGMII IO voltage to 1.8V */ - phy_write(dev, 0x1d, 0x1f); - phy_write(dev, 0x1e, 0x8); - - /* introduce tx clock delay */ - phy_write(dev, 0x1d, 0x5); - val = phy_read(dev, 0x1e); - val |= 0x0100; - phy_write(dev, 0x1e, val); - - return 0; -} - -#define PHY_ID_AR8031 0x004dd074 -static void __init imx6sx_enet_phy_init(void) -{ - if (IS_BUILTIN(CONFIG_PHYLIB)) - phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff, - ar8031_phy_fixup); -} - static void __init imx6sx_enet_clk_sel(void) { struct regmap *gpr; @@ -57,7 +32,6 @@ static void __init imx6sx_enet_clk_sel(void) static inline void imx6sx_enet_init(void) { - imx6sx_enet_phy_init(); imx6sx_enet_clk_sel(); } diff --git a/arch/arm/mach-imx/mach-imx7d.c b/arch/arm/mach-imx/mach-imx7d.c index 879c35929a13..6fdd06bcf988 100644 --- a/arch/arm/mach-imx/mach-imx7d.c +++ b/arch/arm/mach-imx/mach-imx7d.c @@ -14,25 +14,6 @@ #include "common.h" -static int ar8031_phy_fixup(struct phy_device *dev) -{ - u16 val; - - /* Set RGMII IO voltage to 1.8V */ - phy_write(dev, 0x1d, 0x1f); - phy_write(dev, 0x1e, 0x8); - - /* disable phy AR8031 SmartEEE function. */ - phy_write(dev, 0xd, 0x3); - phy_write(dev, 0xe, 0x805d); - phy_write(dev, 0xd, 0x4003); - val = phy_read(dev, 0xe); - val &= ~(0x1 << 8); - phy_write(dev, 0xe, val); - - return 0; -} - static int bcm54220_phy_fixup(struct phy_device *dev) { /* enable RXC skew select RGMII copper mode */ @@ -44,14 +25,11 @@ static int bcm54220_phy_fixup(struct phy_device *dev) return 0; } -#define PHY_ID_AR8031 0x004dd074 #define PHY_ID_BCM54220 0x600d8589 static void __init imx7d_enet_phy_init(void) { if (IS_BUILTIN(CONFIG_PHYLIB)) { - phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff, - ar8031_phy_fixup); phy_register_fixup_for_uid(PHY_ID_BCM54220, 0xffffffff, bcm54220_phy_fixup); } @@ -91,7 +69,7 @@ static void __init imx7d_init_late(void) static void __init imx7d_init_irq(void) { imx_init_revision_from_anatop(); - imx_src_init(); + imx7_src_init(); irqchip_init(); } @@ -102,6 +80,7 @@ static const char *const imx7d_dt_compat[] __initconst = { }; DT_MACHINE_START(IMX7D, "Freescale i.MX7 Dual (Device Tree)") + .smp = smp_ops(imx7_smp_ops), .init_irq = imx7d_init_irq, .init_machine = imx7d_init_machine, .init_late = imx7d_init_late, diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index cf4e9335831c..972639038be5 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -92,6 +92,32 @@ const struct smp_operations imx_smp_ops __initconst = { #endif }; +/* + * Initialise the CPU possible map early - this describes the CPUs + * which may be present or become present in the system. + */ +static void __init imx7_smp_init_cpus(void) +{ + struct device_node *np; + int i, ncores = 0; + + /* The iMX7D SCU does not report core count, get it from DT */ + for_each_of_cpu_node(np) + ncores++; + + for (i = ncores; i < NR_CPUS; i++) + set_cpu_possible(i, false); +} + +const struct smp_operations imx7_smp_ops __initconst = { + .smp_init_cpus = imx7_smp_init_cpus, + .smp_boot_secondary = imx_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = imx_cpu_die, + .cpu_kill = imx_cpu_kill, +#endif +}; + #define DCFG_CCSR_SCRATCHRW1 0x200 static int ls1021a_boot_secondary(unsigned int cpu, struct task_struct *idle) diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c index f52f371292ac..95fd1fbb0826 100644 --- a/arch/arm/mach-imx/src.c +++ b/arch/arm/mach-imx/src.c @@ -6,15 +6,19 @@ #include <linux/init.h> #include <linux/io.h> +#include <linux/iopoll.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/reset-controller.h> #include <linux/smp.h> #include <asm/smp_plat.h> #include "common.h" +#include "hardware.h" #define SRC_SCR 0x000 -#define SRC_GPR1 0x020 +#define SRC_GPR1_V1 0x020 +#define SRC_GPR1_V2 0x074 +#define SRC_GPR1(gpr_v2) ((gpr_v2) ? SRC_GPR1_V2 : SRC_GPR1_V1) #define BP_SRC_SCR_WARM_RESET_ENABLE 0 #define BP_SRC_SCR_SW_GPU_RST 1 #define BP_SRC_SCR_SW_VPU_RST 2 @@ -23,9 +27,18 @@ #define BP_SRC_SCR_SW_IPU2_RST 12 #define BP_SRC_SCR_CORE1_RST 14 #define BP_SRC_SCR_CORE1_ENABLE 22 +/* below is for i.MX7D */ +#define SRC_A7RCR1 0x008 +#define BP_SRC_A7RCR1_A7_CORE1_ENABLE 1 +#define GPC_CPU_PGC_SW_PUP_REQ 0xf0 +#define GPC_CPU_PGC_SW_PDN_REQ 0xfc +#define GPC_PGC_C1 0x840 +#define BM_CPU_PGC_SW_PDN_PUP_REQ_CORE1_A7 0x2 static void __iomem *src_base; static DEFINE_SPINLOCK(scr_lock); +static bool gpr_v2; +static void __iomem *gpc_base; static const int sw_reset_bits[5] = { BP_SRC_SCR_SW_GPU_RST, @@ -73,17 +86,64 @@ static struct reset_controller_dev imx_reset_controller = { .nr_resets = ARRAY_SIZE(sw_reset_bits), }; +static void imx_gpcv2_set_m_core_pgc(bool enable, u32 offset) +{ + writel_relaxed(enable, gpc_base + offset); +} + +/* + * The motivation for bringing up the second i.MX7D core inside the kernel + * is that legacy vendor bootloaders usually do not implement PSCI support. + * This is a significant blocker for systems in the field that are running old + * bootloader versions to upgrade to a modern mainline kernel version, as only + * one CPU of the i.MX7D would be brought up. + * Bring up the second i.MX7D core inside the kernel to make the migration + * path to mainline kernel easier for the existing iMX7D users. + */ +void imx_gpcv2_set_core1_pdn_pup_by_software(bool pdn) +{ + u32 reg = pdn ? GPC_CPU_PGC_SW_PDN_REQ : GPC_CPU_PGC_SW_PUP_REQ; + u32 val, pup; + int ret; + + imx_gpcv2_set_m_core_pgc(true, GPC_PGC_C1); + val = readl_relaxed(gpc_base + reg); + val |= BM_CPU_PGC_SW_PDN_PUP_REQ_CORE1_A7; + writel_relaxed(val, gpc_base + reg); + + ret = readl_relaxed_poll_timeout_atomic(gpc_base + reg, pup, + !(pup & BM_CPU_PGC_SW_PDN_PUP_REQ_CORE1_A7), + 5, 1000000); + if (ret < 0) { + pr_err("i.MX7D: CORE1_A7 power up timeout\n"); + val &= ~BM_CPU_PGC_SW_PDN_PUP_REQ_CORE1_A7; + writel_relaxed(val, gpc_base + reg); + } + + imx_gpcv2_set_m_core_pgc(false, GPC_PGC_C1); +} + void imx_enable_cpu(int cpu, bool enable) { u32 mask, val; cpu = cpu_logical_map(cpu); - mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1); spin_lock(&scr_lock); - val = readl_relaxed(src_base + SRC_SCR); - val = enable ? val | mask : val & ~mask; - val |= 1 << (BP_SRC_SCR_CORE1_RST + cpu - 1); - writel_relaxed(val, src_base + SRC_SCR); + if (gpr_v2) { + if (enable) + imx_gpcv2_set_core1_pdn_pup_by_software(false); + + mask = 1 << (BP_SRC_A7RCR1_A7_CORE1_ENABLE + cpu - 1); + val = readl_relaxed(src_base + SRC_A7RCR1); + val = enable ? val | mask : val & ~mask; + writel_relaxed(val, src_base + SRC_A7RCR1); + } else { + mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1); + val = readl_relaxed(src_base + SRC_SCR); + val = enable ? val | mask : val & ~mask; + val |= 1 << (BP_SRC_SCR_CORE1_RST + cpu - 1); + writel_relaxed(val, src_base + SRC_SCR); + } spin_unlock(&scr_lock); } @@ -91,19 +151,19 @@ void imx_set_cpu_jump(int cpu, void *jump_addr) { cpu = cpu_logical_map(cpu); writel_relaxed(__pa_symbol(jump_addr), - src_base + SRC_GPR1 + cpu * 8); + src_base + SRC_GPR1(gpr_v2) + cpu * 8); } u32 imx_get_cpu_arg(int cpu) { cpu = cpu_logical_map(cpu); - return readl_relaxed(src_base + SRC_GPR1 + cpu * 8 + 4); + return readl_relaxed(src_base + SRC_GPR1(gpr_v2) + cpu * 8 + 4); } void imx_set_cpu_arg(int cpu, u32 arg) { cpu = cpu_logical_map(cpu); - writel_relaxed(arg, src_base + SRC_GPR1 + cpu * 8 + 4); + writel_relaxed(arg, src_base + SRC_GPR1(gpr_v2) + cpu * 8 + 4); } void __init imx_src_init(void) @@ -131,3 +191,26 @@ void __init imx_src_init(void) writel_relaxed(val, src_base + SRC_SCR); spin_unlock(&scr_lock); } + +void __init imx7_src_init(void) +{ + struct device_node *np; + + gpr_v2 = true; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx7d-src"); + if (!np) + return; + + src_base = of_iomap(np, 0); + if (!src_base) + return; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx7d-gpc"); + if (!np) + return; + + gpc_base = of_iomap(np, 0); + if (!gpc_base) + return; +} diff --git a/arch/arm/mach-imx/suspend-imx53.S b/arch/arm/mach-imx/suspend-imx53.S index 41b8aad65363..46570ec2fbcf 100644 --- a/arch/arm/mach-imx/suspend-imx53.S +++ b/arch/arm/mach-imx/suspend-imx53.S @@ -28,11 +28,11 @@ * ^ * ^ * imx53_suspend code - * PM_INFO structure(imx53_suspend_info) + * PM_INFO structure(imx5_cpu_suspend_info) * ======================== low address ======================= */ -/* Offsets of members of struct imx53_suspend_info */ +/* Offsets of members of struct imx5_cpu_suspend_info */ #define SUSPEND_INFO_MX53_M4IF_V_OFFSET 0x0 #define SUSPEND_INFO_MX53_IOMUXC_V_OFFSET 0x4 #define SUSPEND_INFO_MX53_IO_COUNT_OFFSET 0x8 diff --git a/arch/arm/mach-npcm/Kconfig b/arch/arm/mach-npcm/Kconfig index 658c8efb4ca1..a71cf1d189ae 100644 --- a/arch/arm/mach-npcm/Kconfig +++ b/arch/arm/mach-npcm/Kconfig @@ -10,6 +10,7 @@ config ARCH_WPCM450 bool "Support for WPCM450 BMC (Hermon)" depends on ARCH_MULTI_V5 select CPU_ARM926T + select WPCM450_AIC select NPCM7XX_TIMER help General support for WPCM450 BMC (Hermon). diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 9536b8f3c07d..208c700c2455 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -65,14 +65,14 @@ config MACH_OMAP_INNOVATOR config MACH_OMAP_H2 bool "TI H2 Support" depends on ARCH_OMAP16XX - help + help TI OMAP 1610/1611B H2 board support. Say Y here if you have such a board. config MACH_OMAP_H3 bool "TI H3 Support" depends on ARCH_OMAP16XX - help + help TI OMAP 1710 H3 board support. Say Y here if you have such a board. @@ -85,14 +85,14 @@ config MACH_HERALD config MACH_OMAP_OSK bool "TI OSK Support" depends on ARCH_OMAP16XX - help + help TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here if you have such a board. config OMAP_OSK_MISTRAL bool "Mistral QVGA board Support" depends on MACH_OMAP_OSK - help + help The OSK supports an optional add-on board with a Quarter-VGA touchscreen, PDA-ish buttons, a resume button, bicolor LED, and camera connector. Say Y here if you have this board. @@ -100,14 +100,14 @@ config OMAP_OSK_MISTRAL config MACH_OMAP_PERSEUS2 bool "TI Perseus2" depends on ARCH_OMAP730 - help + help Support for TI OMAP 730 Perseus2 board. Say Y here if you have such a board. config MACH_OMAP_FSAMPLE bool "TI F-Sample" depends on ARCH_OMAP730 - help + help Support for TI OMAP 850 F-Sample board. Say Y here if you have such a board. diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 2ee527c00284..1026a816dcc0 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -458,20 +458,6 @@ static struct gpiod_lookup_table leds_gpio_table = { #ifdef CONFIG_LEDS_TRIGGERS DEFINE_LED_TRIGGER(ams_delta_camera_led_trigger); - -static int ams_delta_camera_power(struct device *dev, int power) -{ - /* - * turn on camera LED - */ - if (power) - led_trigger_event(ams_delta_camera_led_trigger, LED_FULL); - else - led_trigger_event(ams_delta_camera_led_trigger, LED_OFF); - return 0; -} -#else -#define ams_delta_camera_power NULL #endif static struct platform_device ams_delta_audio_device = { diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index c40cf5ef8607..977b0b744c22 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -320,7 +320,7 @@ static int tps_setup(struct i2c_client *client, void *context) { if (!IS_BUILTIN(CONFIG_TPS65010)) return -ENOSYS; - + tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V | TPS_LDO1_ENABLE | TPS_VLDO1_3_0V); @@ -394,6 +394,8 @@ static void __init h2_init(void) BUG_ON(gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0); gpio_direction_input(H2_NAND_RB_GPIO_PIN); + gpiod_add_lookup_table(&isp1301_gpiod_table); + omap_cfg_reg(L3_1610_FLASH_CS2B_OE); omap_cfg_reg(M8_1610_FLASH_CS2B_WE); diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 2c1e2b32b9b3..a745d64d4699 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -655,9 +655,13 @@ static int __init omap_pm_init(void) irq = INT_7XX_WAKE_UP_REQ; else if (cpu_is_omap16xx()) irq = INT_1610_WAKE_UP_REQ; - if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup", - NULL)) - pr_err("Failed to request irq %d (peripheral wakeup)\n", irq); + else + irq = -1; + + if (irq >= 0) { + if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup", NULL)) + pr_err("Failed to request irq %d (peripheral wakeup)\n", irq); + } /* Program new power ramp-up time * (0 for most boards since we don't lower voltage when in deep sleep) diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 418a61ecb827..5e86145db0e2 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -322,6 +322,7 @@ static int n8x0_mmc_get_cover_state(struct device *dev, int slot) static void n8x0_mmc_callback(void *data, u8 card_mask) { +#ifdef CONFIG_MMC_OMAP int bit, *openp, index; if (board_is_n800()) { @@ -339,7 +340,6 @@ static void n8x0_mmc_callback(void *data, u8 card_mask) else *openp = 0; -#ifdef CONFIG_MMC_OMAP omap_mmc_notify_cover_event(mmc_device, index, *openp); #else pr_warn("MMC: notify cover event not available\n"); diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index d02fe63dab59..14beb59e5f7b 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -26,7 +26,6 @@ extern struct omap_domain_base cm_base; extern struct omap_domain_base cm2_base; -extern void omap2_set_globals_cm(void __iomem *cm, void __iomem *cm2); # endif /* diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c index b7ea609386d5..e2d069fe67f1 100644 --- a/arch/arm/mach-omap2/cm_common.c +++ b/arch/arm/mach-omap2/cm_common.c @@ -38,19 +38,6 @@ struct omap_domain_base cm2_base; #define CM_SINGLE_INSTANCE 0x2 /** - * omap2_set_globals_cm - set the CM/CM2 base addresses (for early use) - * @cm: CM base virtual address - * @cm2: CM2 base virtual address (if present on the booted SoC) - * - * XXX Will be replaced when the PRM/CM drivers are completed. - */ -void __init omap2_set_globals_cm(void __iomem *cm, void __iomem *cm2) -{ - cm_base.va = cm; - cm2_base.va = cm2; -} - -/** * cm_split_idlest_reg - split CM_IDLEST reg addr into its components * @idlest_reg: CM_IDLEST* virtual address * @prcm_inst: pointer to an s16 to return the PRCM instance offset diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index db446f271f5d..32f58f58515e 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -130,7 +130,6 @@ void am33xx_init_early(void); void am35xx_init_early(void); void ti814x_init_early(void); void ti816x_init_early(void); -void am33xx_init_early(void); void am43xx_init_early(void); void am43xx_init_late(void); void omap4430_init_early(void); diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 73338cf80d76..062d431fc33a 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -136,11 +136,6 @@ struct omap3_control_regs { static struct omap3_control_regs control_context; #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */ -void __init omap2_set_globals_control(void __iomem *ctrl) -{ - omap2_ctrl_base = ctrl; -} - u8 omap_ctrl_readb(u16 offset) { u32 val; diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index eceb4b09adb2..c4ca30ba1790 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -528,7 +528,6 @@ extern int omap3_ctrl_save_padconf(void); void omap3_ctrl_init(void); int omap2_control_base_init(void); int omap_control_init(void); -void omap2_set_globals_control(void __iomem *ctrl); void __init omap3_control_legacy_iomap_init(void); #else #define omap_ctrl_readb(x) 0 diff --git a/arch/arm/mach-omap2/pm33xx-core.c b/arch/arm/mach-omap2/pm33xx-core.c index 56f2c0bcae5a..bf0d25fd2cea 100644 --- a/arch/arm/mach-omap2/pm33xx-core.c +++ b/arch/arm/mach-omap2/pm33xx-core.c @@ -8,6 +8,7 @@ #include <linux/cpuidle.h> #include <linux/platform_data/pm33xx.h> +#include <linux/suspend.h> #include <asm/cpuidle.h> #include <asm/smp_scu.h> #include <asm/suspend.h> @@ -324,6 +325,44 @@ static struct am33xx_pm_platform_data *am33xx_pm_get_pdata(void) return NULL; } +#ifdef CONFIG_SUSPEND +/* + * Block system suspend initially. Later on pm33xx sets up it's own + * platform_suspend_ops after probe. That depends also on loaded + * wkup_m3_ipc and booted am335x-pm-firmware.elf. + */ +static int amx3_suspend_block(suspend_state_t state) +{ + pr_warn("PM not initialized for pm33xx, wkup_m3_ipc, or am335x-pm-firmware.elf\n"); + + return -EINVAL; +} + +static int amx3_pm_valid(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_STANDBY: + return 1; + default: + return 0; + } +} + +static const struct platform_suspend_ops amx3_blocked_pm_ops = { + .begin = amx3_suspend_block, + .valid = amx3_pm_valid, +}; + +static void __init amx3_block_suspend(void) +{ + suspend_set_ops(&amx3_blocked_pm_ops); +} +#else +static inline void amx3_block_suspend(void) +{ +} +#endif /* CONFIG_SUSPEND */ + int __init amx3_common_pm_init(void) { struct am33xx_pm_platform_data *pdata; @@ -337,6 +376,7 @@ int __init amx3_common_pm_init(void) devinfo.size_data = sizeof(*pdata); devinfo.id = -1; platform_device_register_full(&devinfo); + amx3_block_suspend(); return 0; } diff --git a/arch/arm/mach-pxa/pxa_cplds_irqs.c b/arch/arm/mach-pxa/pxa_cplds_irqs.c index ec0d9b094744..bddfc7cd5d40 100644 --- a/arch/arm/mach-pxa/pxa_cplds_irqs.c +++ b/arch/arm/mach-pxa/pxa_cplds_irqs.c @@ -121,8 +121,13 @@ static int cplds_probe(struct platform_device *pdev) return fpga->irq; base_irq = platform_get_irq(pdev, 1); - if (base_irq < 0) + if (base_irq < 0) { base_irq = 0; + } else { + ret = devm_irq_alloc_descs(&pdev->dev, base_irq, base_irq, CPLDS_NB_IRQ, 0); + if (ret < 0) + return ret; + } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); fpga->base = devm_ioremap_resource(&pdev->dev, res); diff --git a/arch/arm/mach-s3c/mach-rx1950.c b/arch/arm/mach-s3c/mach-rx1950.c index a3f46aa61c45..313e080e179e 100644 --- a/arch/arm/mach-s3c/mach-rx1950.c +++ b/arch/arm/mach-s3c/mach-rx1950.c @@ -271,7 +271,6 @@ static int rx1950_led_blink_set(struct gpio_desc *desc, int state, break; default: return -EINVAL; - break; } if (delay_on && delay_off && !*delay_on && !*delay_off) diff --git a/arch/arm/tools/syscall.tbl b/arch/arm/tools/syscall.tbl index c7679d7db98b..28e03b5fec00 100644 --- a/arch/arm/tools/syscall.tbl +++ b/arch/arm/tools/syscall.tbl @@ -456,7 +456,7 @@ 440 common process_madvise sys_process_madvise 441 common epoll_pwait2 sys_epoll_pwait2 442 common mount_setattr sys_mount_setattr -443 common quotactl_path sys_quotactl_path +# 443 reserved for quotactl_path 444 common landlock_create_ruleset sys_landlock_create_ruleset 445 common landlock_add_rule sys_landlock_add_rule 446 common landlock_restrict_self sys_landlock_restrict_self diff --git a/arch/arm/xen/mm.c b/arch/arm/xen/mm.c index f8f07469d259..a7e54a087b80 100644 --- a/arch/arm/xen/mm.c +++ b/arch/arm/xen/mm.c @@ -135,24 +135,18 @@ void xen_destroy_contiguous_region(phys_addr_t pstart, unsigned int order) return; } -int xen_swiotlb_detect(void) -{ - if (!xen_domain()) - return 0; - if (xen_feature(XENFEAT_direct_mapped)) - return 1; - /* legacy case */ - if (!xen_feature(XENFEAT_not_direct_mapped) && xen_initial_domain()) - return 1; - return 0; -} - static int __init xen_mm_init(void) { struct gnttab_cache_flush cflush; + int rc; + if (!xen_swiotlb_detect()) return 0; - xen_swiotlb_init(); + + rc = xen_swiotlb_init(); + /* we can work with the default swiotlb */ + if (rc < 0 && rc != -EEXIST) + return rc; cflush.op = 0; cflush.a.dev_bus_addr = 0; |