519 files changed, 140 insertions, 93361 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 43c7773b89ae..9f85cc34be7d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -282,8 +282,7 @@ config PHYS_OFFSET
 	default DRAM_BASE if !MMU
 	default 0x00000000 if ARCH_FOOTBRIDGE
 	default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
-	default 0x30000000 if ARCH_S3C24XX
-	default 0xa0000000 if ARCH_IOP32X || ARCH_PXA
+	default 0xa0000000 if ARCH_PXA
 	default 0xc0000000 if ARCH_EP93XX || ARCH_SA1100
 	default 0
 	help
@@ -438,8 +437,6 @@ source "arch/arm/mach-berlin/Kconfig"
 
 source "arch/arm/mach-clps711x/Kconfig"
 
-source "arch/arm/mach-cns3xxx/Kconfig"
-
 source "arch/arm/mach-davinci/Kconfig"
 
 source "arch/arm/mach-digicolor/Kconfig"
@@ -462,8 +459,6 @@ source "arch/arm/mach-hpe/Kconfig"
 
 source "arch/arm/mach-imx/Kconfig"
 
-source "arch/arm/mach-iop32x/Kconfig"
-
 source "arch/arm/mach-ixp4xx/Kconfig"
 
 source "arch/arm/mach-keystone/Kconfig"
@@ -931,12 +926,6 @@ config ISA
 config ISA_DMA_API
 	bool
 
-config PCI_NANOENGINE
-	bool "BSE nanoEngine PCI support"
-	depends on SA1100_NANOENGINE
-	help
-	  Enable PCI on the BSE nanoEngine board.
-
 config ARM_ERRATA_814220
 	bool "ARM errata: Cache maintenance by set/way operations can execute out of order"
 	depends on CPU_V7
@@ -1465,19 +1454,6 @@ config ATAGS
 	  the ARM_ATAG_DTB_COMPAT option) then you may unselect this option
 	  to remove ATAGS support from your kernel binary.
 
-config UNUSED_BOARD_FILES
-	bool "Board support for machines without known users"
-	depends on ATAGS
-	help
-	  Most ATAGS based board files are completely unused and are
-	  scheduled for removal in early 2023, and left out of kernels
-	  by default now.  If you are using a board file that is marked
-	  as unused, turn on this option to build support into the kernel.
-
-	  To keep support for your individual board from being removed,
-	  send a reply to the email discussion at
-	  https://lore.kernel.org/all/CAK8P3a0Z9vGEQbVRBo84bSyPFM-LF+hs5w8ZA51g2Z+NsdtDQA@mail.gmail.com/
-
 config DEPRECATED_PARAM_STRUCT
 	bool "Provide old way to pass kernel parameters"
 	depends on ATAGS
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index c345775f035b..86f423143185 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -307,14 +307,6 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the second serial port on these devices.
 
-	config DEBUG_CNS3XXX
-		bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx"
-		depends on ARCH_CNS3XXX
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want the debug print routines to direct
-                  their output to the CNS3xxx UART0.
-
 	config DEBUG_DAVINCI_DA8XX_UART1
 		bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
 		depends on ARCH_DAVINCI_DA8XX
@@ -331,14 +323,6 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to UART2 serial port on DaVinci DA8XX devices.
 
-	config DEBUG_DAVINCI_DMx_UART0
-		bool "Kernel low-level debugging on DaVinci DMx using UART0"
-		depends on ARCH_DAVINCI_DMx
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART0 serial port on DaVinci DMx devices.
-
 	config DEBUG_DC21285_PORT
 		bool "Kernel low-level debugging messages via footbridge serial port"
 		depends on FOOTBRIDGE
@@ -768,30 +752,6 @@ choice
 		depends on ARCH_OMAP2PLUS
 		select DEBUG_UART_8250
 
-	config DEBUG_OMAP7XXUART1
-		bool "Kernel low-level debugging via OMAP730 UART1"
-		depends on ARCH_OMAP730
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on OMAP730 based platforms on the UART1.
-
-	config DEBUG_OMAP7XXUART2
-		bool "Kernel low-level debugging via OMAP730 UART2"
-		depends on ARCH_OMAP730
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on OMAP730 based platforms on the UART2.
-
-	config DEBUG_OMAP7XXUART3
-		bool "Kernel low-level debugging via OMAP730 UART3"
-		depends on ARCH_OMAP730
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on OMAP730 based platforms on the UART3.
-
 	config DEBUG_TI81XXUART1
 		bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)"
 		depends on ARCH_OMAP2PLUS
@@ -1046,7 +1006,6 @@ choice
 	config DEBUG_S3C_UART0
 		depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
-		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 0 for low-level debug"
@@ -1058,7 +1017,6 @@ choice
 	config DEBUG_S3C_UART1
 		depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
-		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 1 for low-level debug"
@@ -1070,7 +1028,6 @@ choice
 	config DEBUG_S3C_UART2
 		depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
-		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 2 for low-level debug"
@@ -1090,33 +1047,6 @@ choice
 		  their output to UART 3. The port must have been initialised
 		  by the boot-loader before use.
 
-	config DEBUG_S3C2410_UART0
-		depends on ARCH_S3C24XX
-		select DEBUG_S3C2410_UART
-		bool "Use S3C2410/S3C2412 UART 0 for low-level debug"
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART 0. The port must have been initialised
-		  by the boot-loader before use.
-
-	config DEBUG_S3C2410_UART1
-		depends on ARCH_S3C24XX
-		select DEBUG_S3C2410_UART
-		bool "Use S3C2410/S3C2412 UART 1 for low-level debug"
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART 1. The port must have been initialised
-		  by the boot-loader before use.
-
-	config DEBUG_S3C2410_UART2
-		depends on ARCH_S3C24XX
-		select DEBUG_S3C2410_UART
-		bool "Use S3C2410/S3C2412 UART 2 for low-level debug"
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART 2. The port must have been initialised
-		  by the boot-loader before use.
-
 	config DEBUG_SA1100
 		depends on ARCH_SA1100
 		bool "Use SA1100 UARTs for low-level debug"
@@ -1479,13 +1409,6 @@ config DEBUG_AT91_UART
 config DEBUG_EXYNOS_UART
 	bool
 
-config DEBUG_S3C2410_UART
-	bool
-	select DEBUG_S3C24XX_UART
-
-config DEBUG_S3C24XX_UART
-	bool
-
 config DEBUG_S3C64XX_UART
 	bool
 
@@ -1493,8 +1416,7 @@ config DEBUG_S5PV210_UART
 	bool
 
 config DEBUG_S3C_UART
-	depends on DEBUG_S3C2410_UART || DEBUG_S3C24XX_UART || \
-		   DEBUG_S3C64XX_UART ||  DEBUG_S5PV210_UART || \
+	depends on DEBUG_S3C64XX_UART ||  DEBUG_S5PV210_UART || \
 		   DEBUG_EXYNOS_UART
 	int
 	default "0" if DEBUG_S3C_UART0
@@ -1595,7 +1517,7 @@ config DEBUG_LL_INCLUDE
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4
-	default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART || DEBUG_S3C64XX_UART
+	default "debug/s3c24xx.S" if DEBUG_S3C64XX_UART
 	default "debug/s5pv210.S" if DEBUG_S5PV210_UART
 	default "debug/sti.S" if DEBUG_STIH41X_ASC2
 	default "debug/sti.S" if DEBUG_STIH41X_SBC_ASC1
@@ -1618,11 +1540,10 @@ config DEBUG_UART_PL01X
 
 # Compatibility options for 8250
 config DEBUG_UART_8250
-	def_bool ARCH_IOP32X || ARCH_IXP4XX || ARCH_RPC
+	def_bool ARCH_IXP4XX || ARCH_RPC
 
 config DEBUG_UART_PHYS
 	hex "Physical base address of debug UART"
-	default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0
 	default 0x01c28000 if DEBUG_SUNXI_UART0
 	default 0x01c28400 if DEBUG_SUNXI_UART1
 	default 0x01d0c000 if DEBUG_DAVINCI_DA8XX_UART1
@@ -1679,13 +1600,6 @@ config DEBUG_UART_PHYS
 	default 0x4806e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
 	default 0x49020000 if DEBUG_OMAP3UART3
 	default 0x49042000 if DEBUG_OMAP3UART4
-	default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
-				DEBUG_S3C2410_UART0)
-	default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
-				DEBUG_S3C2410_UART1)
-	default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
-				DEBUG_S3C2410_UART2)
-	default 0x78000000 if DEBUG_CNS3XXX
 	default 0x7c0003f8 if DEBUG_FOOTBRIDGE_COM1
 	default 0x7f005000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
 	default 0x7f005400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
@@ -1729,7 +1643,6 @@ config DEBUG_UART_PHYS
 	default 0xfcb00000 if DEBUG_HI3620_UART
 	default 0xfd883000 if DEBUG_ALPINE_UART0
 	default 0xfe531000 if DEBUG_STIH41X_SBC_ASC1
-	default 0xfe800000 if ARCH_IOP32X
 	default 0xfed32000 if DEBUG_STIH41X_ASC2
 	default 0xff690000 if DEBUG_RK32_UART2
 	default 0xffc02000 if DEBUG_SOCFPGA_UART0
@@ -1738,9 +1651,9 @@ config DEBUG_UART_PHYS
 	default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0
 	default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2
 	default 0xfff36000 if DEBUG_HIGHBANK_UART
-	default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
-	default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
-	default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
+	default 0xfffb0000 if DEBUG_OMAP1UART1
+	default 0xfffb0800 if DEBUG_OMAP1UART2
+	default 0xfffb9800 if DEBUG_OMAP1UART3
 	default 0xfffe8600 if DEBUG_BCM63XX_UART
 	default 0xffffee00 if DEBUG_AT91_SAM9263_DBGU
 	default 0xfffff200 if DEBUG_AT91_RM9200_DBGU
@@ -1754,7 +1667,7 @@ config DEBUG_UART_PHYS
 		DEBUG_RCAR_GEN2_SCIF2 || DEBUG_RCAR_GEN2_SCIF4 || \
 		DEBUG_RCAR_GEN2_SCIFA2 || \
 		DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
-		DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
+		DEBUG_RMOBILE_SCIFA4 || \
 		DEBUG_S3C64XX_UART || \
 		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
 		DEBUG_DIGICOLOR_UA0 || \
@@ -1791,15 +1704,9 @@ config DEBUG_UART_VIRT
 	default 0xf6200000 if DEBUG_PXA_UART1
 	default 0xf7000000 if DEBUG_SUN9I_UART0
 	default 0xf7000000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
-	default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
-				DEBUG_S3C2410_UART0)
 	default 0xf7000400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
 	default 0xf7000800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2
 	default 0xf7000c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3
-	default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
-				DEBUG_S3C2410_UART1)
-	default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
-				DEBUG_S3C2410_UART2)
 	default 0xf7020000 if DEBUG_AT91_SAMA5D2_UART1
 	default 0xf7fc9000 if DEBUG_BERLIN_UART
 	default 0xf8007000 if DEBUG_HIP04_UART
@@ -1818,7 +1725,6 @@ config DEBUG_UART_VIRT
 				DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2
 	default 0xfa06e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
 	default 0xfa71e000 if DEBUG_QCOM_UARTDM
-	default 0xfb002000 if DEBUG_CNS3XXX
 	default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
 	default 0xfb00c000 if DEBUG_AT91_SAMA5D4_USART3
 	default 0xfb020000 if DEBUG_OMAP3UART3
@@ -1835,7 +1741,6 @@ config DEBUG_UART_VIRT
 	default 0xfe018000 if DEBUG_MMP_UART3
 	default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
 	default 0xfe300000 if DEBUG_BCM_KONA_UART
-	default 0xfe800000 if ARCH_IOP32X
 	default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HIX5HD2_UART
 	default 0xfeb24000 if DEBUG_RK3X_UART0
 	default 0xfeb26000 if DEBUG_RK3X_UART1
@@ -1846,7 +1751,6 @@ config DEBUG_UART_VIRT
 	default 0xfec03000 if DEBUG_SOCFPGA_CYCLONE5_UART1
 	default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE
 	default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE
-	default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0
 	default 0xfec90000 if DEBUG_RK32_UART2
 	default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1
 	default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_SD5203_UART
@@ -1859,14 +1763,14 @@ config DEBUG_UART_VIRT
 	default 0xfec00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
 	default 0xfec00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
 	default 0xfef36000 if DEBUG_HIGHBANK_UART
-	default 0xff0b0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
-	default 0xff0b0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
-	default 0xff0b9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
+	default 0xff0b0000 if DEBUG_OMAP1UART1
+	default 0xff0b0800 if DEBUG_OMAP1UART2
+	default 0xff0b9800 if DEBUG_OMAP1UART3
 	default 0xffd01000 if DEBUG_HIP01_UART
 	default DEBUG_UART_PHYS if !MMU
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
 		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
-		DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
+		DEBUG_QCOM_UARTDM || \
 		DEBUG_S3C64XX_UART || \
 		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
 		DEBUG_DIGICOLOR_UA0 || \
@@ -1877,9 +1781,8 @@ config DEBUG_UART_VIRT
 config DEBUG_UART_8250_SHIFT
 	int "Register offset shift for the 8250 debug UART"
 	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
-	default 0 if DEBUG_FOOTBRIDGE_COM1 || ARCH_IOP32X || DEBUG_BCM_5301X || \
-		DEBUG_BCM_HR2 || DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || \
-		DEBUG_OMAP7XXUART3
+	default 0 if DEBUG_FOOTBRIDGE_COM1 || DEBUG_BCM_5301X || \
+		DEBUG_BCM_HR2
 	default 3 if DEBUG_MSTARV7_PMUART
 	default 2
 
@@ -1890,9 +1793,9 @@ config DEBUG_UART_8250_WORD
 	default y if DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_ARRIA10_UART1 || \
 		DEBUG_SOCFPGA_CYCLONE5_UART1 || DEBUG_KEYSTONE_UART0 || \
 		DEBUG_KEYSTONE_UART1 || DEBUG_ALPINE_UART0 || \
-		DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
-		DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_BCM_IPROC_UART3 || \
-		DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2
+		DEBUG_DAVINCI_DA8XX_UART1 || DEBUG_DAVINCI_DA8XX_UART2 || \
+		DEBUG_BCM_IPROC_UART3 || DEBUG_BCM_KONA_UART || \
+		DEBUG_RK32_UART2
 
 config DEBUG_UART_8250_PALMCHIP
 	bool "8250 UART is Palmchip BK-310x"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 955b0362cdfb..4c8c3b92ac6f 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -152,8 +152,6 @@ CHECKFLAGS	+= -D__arm__
 # during boot, and this offset is critical to the functioning of
 # kexec-tools.
 textofs-y	:= 0x00008000
-# We don't want the htc bootloader to corrupt kernel during resume
-textofs-$(CONFIG_PM_H1940)      := 0x00108000
 # RTD1195 has Boot ROM at start of address space
 textofs-$(CONFIG_ARCH_REALTEK)  := 0x00108000
 # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
@@ -178,7 +176,6 @@ machine-$(CONFIG_ARCH_AXXIA)		+= axxia
 machine-$(CONFIG_ARCH_BCM)		+= bcm
 machine-$(CONFIG_ARCH_BERLIN)		+= berlin
 machine-$(CONFIG_ARCH_CLPS711X)		+= clps711x
-machine-$(CONFIG_ARCH_CNS3XXX)		+= cns3xxx
 machine-$(CONFIG_ARCH_DAVINCI)		+= davinci
 machine-$(CONFIG_ARCH_DIGICOLOR)	+= digicolor
 machine-$(CONFIG_ARCH_DOVE)		+= dove
@@ -189,7 +186,6 @@ machine-$(CONFIG_ARCH_GEMINI)		+= gemini
 machine-$(CONFIG_ARCH_HIGHBANK)		+= highbank
 machine-$(CONFIG_ARCH_HISI)		+= hisi
 machine-$(CONFIG_ARCH_HPE)		+= hpe
-machine-$(CONFIG_ARCH_IOP32X)		+= iop32x
 machine-$(CONFIG_ARCH_IXP4XX)		+= ixp4xx
 machine-$(CONFIG_ARCH_KEYSTONE)		+= keystone
 machine-$(CONFIG_ARCH_LPC18XX)		+= lpc18xx
diff --git a/arch/arm/boot/compressed/head-sa1100.S b/arch/arm/boot/compressed/head-sa1100.S
index 95abdd850fe3..23eae1a65064 100644
--- a/arch/arm/boot/compressed/head-sa1100.S
+++ b/arch/arm/boot/compressed/head-sa1100.S
@@ -20,10 +20,6 @@ __SA1100_start:
 #ifdef CONFIG_SA1100_COLLIE
 		mov	r7, #MACH_TYPE_COLLIE
 #endif
-#ifdef CONFIG_SA1100_SIMPAD
-		@ UNTIL we've something like an open bootldr
-		mov	r7, #MACH_TYPE_SIMPAD	@should be 87
-#endif
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 		ands	r0, r0, #0x0d
 		beq	99f
diff --git a/arch/arm/boot/compressed/misc-ep93xx.h b/arch/arm/boot/compressed/misc-ep93xx.h
index 3dc942589cba..65b4121d1490 100644
--- a/arch/arm/boot/compressed/misc-ep93xx.h
+++ b/arch/arm/boot/compressed/misc-ep93xx.h
@@ -57,8 +57,7 @@ static inline void ep93xx_decomp_setup(void)
 	if (machine_is_ts72xx())
 		ts72xx_watchdog_disable();
 
-	if (machine_is_adssphere() ||
-	    machine_is_edb9301() ||
+	if (machine_is_edb9301() ||
 	    machine_is_edb9302() ||
 	    machine_is_edb9302a() ||
 	    machine_is_edb9302a() ||
@@ -69,16 +68,6 @@ static inline void ep93xx_decomp_setup(void)
 	    machine_is_edb9315() ||
 	    machine_is_edb9315a() ||
 	    machine_is_edb9315a() ||
-	    machine_is_gesbc9312() ||
-	    machine_is_micro9() ||
-	    machine_is_micro9l() ||
-	    machine_is_micro9m() ||
-	    machine_is_micro9s() ||
-	    machine_is_micro9m() ||
-	    machine_is_micro9l() ||
-	    machine_is_micro9s() ||
-	    machine_is_sim_one() ||
-	    machine_is_snapper_cl15() ||
 	    machine_is_ts72xx() ||
 	    machine_is_bk3() ||
 	    machine_is_vision_ep9307())
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d08a3c450ce7..aee97fa75dd1 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1163,8 +1163,6 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rk3288-veyron-speedy.dtb \
 	rk3288-veyron-tiger.dtb \
 	rk3288-vyasa.dtb
-dtb-$(CONFIG_ARCH_S3C24XX) += \
-	s3c2416-smdk2416.dtb
 dtb-$(CONFIG_ARCH_S3C64XX) += \
 	s3c6410-mini6410.dtb \
 	s3c6410-smdk6410.dtb
diff --git a/arch/arm/boot/dts/s3c2410-pinctrl.h b/arch/arm/boot/dts/s3c2410-pinctrl.h
deleted file mode 100644
index 76b6171ae149..000000000000
--- a/arch/arm/boot/dts/s3c2410-pinctrl.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Samsung S3C2410 DTS pinctrl constants
- *
- * Copyright (c) 2016 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2022 Linaro Ltd
- * Author: Krzysztof Kozlowski <krzk@kernel.org>
- */
-
-#ifndef __DTS_ARM_SAMSUNG_S3C2410_PINCTRL_H__
-#define __DTS_ARM_SAMSUNG_S3C2410_PINCTRL_H__
-
-#define S3C2410_PIN_FUNC_INPUT		0
-#define S3C2410_PIN_FUNC_OUTPUT		1
-#define S3C2410_PIN_FUNC_2		2
-#define S3C2410_PIN_FUNC_3		3
-
-#endif /* __DTS_ARM_SAMSUNG_S3C2410_PINCTRL_H__ */
diff --git a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
deleted file mode 100644
index 3268366bd8bc..000000000000
--- a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
+++ /dev/null
@@ -1,172 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung S3C2416 pinctrl settings
- *
- * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
- */
-
-#include "s3c2410-pinctrl.h"
-
-&pinctrl_0 {
-	/*
-	 * Pin banks
-	 */
-
-	gpa: gpa-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpb: gpb-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpc: gpc-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpd: gpd-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpe: gpe-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpf: gpf-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpg: gpg-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gph: gph-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpj: gpj-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpk: gpk-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpl: gpl-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpm: gpm-gpio-bank {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	/*
-	 * Pin groups
-	 */
-
-	uart0_data: uart0-data-pins {
-		samsung,pins = "gph-0", "gph-1";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	uart0_fctl: uart0-fctl-pins {
-		samsung,pins = "gph-8", "gph-9";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	uart1_data: uart1-data-pins {
-		samsung,pins = "gph-2", "gph-3";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	uart1_fctl: uart1-fctl-pins {
-		samsung,pins = "gph-10", "gph-11";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	uart2_data: uart2-data-pins {
-		samsung,pins = "gph-4", "gph-5";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	uart2_fctl: uart2-fctl-pins {
-		samsung,pins = "gph-6", "gph-7";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	uart3_data: uart3-data-pins {
-		samsung,pins = "gph-6", "gph-7";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	extuart_clk: extuart-clk-pins {
-		samsung,pins = "gph-12";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	i2c0_bus: i2c0-bus-pins {
-		samsung,pins = "gpe-14", "gpe-15";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	spi0_bus: spi0-bus-pins {
-		samsung,pins = "gpe-11", "gpe-12", "gpe-13";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	sd0_clk: sd0-clk-pins {
-		samsung,pins = "gpe-5";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	sd0_cmd: sd0-cmd-pins {
-		samsung,pins = "gpe-6";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	sd0_bus1: sd0-bus1-pins {
-		samsung,pins = "gpe-7";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	sd0_bus4: sd0-bus4-pins {
-		samsung,pins = "gpe-8", "gpe-9", "gpe-10";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	sd1_cmd: sd1-cmd-pins {
-		samsung,pins = "gpl-8";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	sd1_clk: sd1-clk-pins {
-		samsung,pins = "gpl-9";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	sd1_bus1: sd1-bus1-pins {
-		samsung,pins = "gpl-0";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-
-	sd1_bus4: sd1-bus4-pins {
-		samsung,pins = "gpl-1", "gpl-2", "gpl-3";
-		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
-	};
-};
diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts
deleted file mode 100644
index e7c379a9842e..000000000000
--- a/arch/arm/boot/dts/s3c2416-smdk2416.dts
+++ /dev/null
@@ -1,77 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung SMDK2416 board device tree source
- *
- * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
- */
-
-/dts-v1/;
-#include "s3c2416.dtsi"
-
-/ {
-	model = "SMDK2416";
-	compatible = "samsung,smdk2416", "samsung,s3c2416";
-
-	memory@30000000 {
-		device_type = "memory";
-		reg =  <0x30000000 0x4000000>;
-	};
-
-	xti: clock-0 {
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-		clock-output-names = "xti";
-		#clock-cells = <0>;
-	};
-};
-
-&rtc {
-	status = "okay";
-};
-
-&sdhci_0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd1_clk>, <&sd1_cmd>,
-			<&sd1_bus1>, <&sd1_bus4>;
-	bus-width = <4>;
-	broken-cd;
-	status = "okay";
-};
-
-&sdhci_1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>,
-			<&sd0_bus1>, <&sd0_bus4>;
-	bus-width = <4>;
-	cd-gpios = <&gpf 1 0>;
-	cd-inverted;
-	status = "okay";
-};
-
-&uart_0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_data>, <&uart0_fctl>;
-};
-
-&uart_1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_data>, <&uart1_fctl>;
-};
-
-&uart_2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_data>;
-};
-
-&uart_3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_data>;
-};
-
-&watchdog {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi
deleted file mode 100644
index 4660751cb207..000000000000
--- a/arch/arm/boot/dts/s3c2416.dtsi
+++ /dev/null
@@ -1,124 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's S3C2416 SoC device tree source
- *
- * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
- */
-
-#include <dt-bindings/clock/s3c2443.h>
-#include "s3c24xx.dtsi"
-#include "s3c2416-pinctrl.dtsi"
-
-/ {
-	model = "Samsung S3C2416 SoC";
-	compatible = "samsung,s3c2416";
-
-	aliases {
-		serial3 = &uart_3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,arm926ej-s";
-			reg = <0x0>;
-		};
-	};
-
-	clocks: clock-controller@4c000000 {
-		compatible = "samsung,s3c2416-clock";
-		reg = <0x4c000000 0x40>;
-		#clock-cells = <1>;
-	};
-
-	uart_3: serial@5000c000 {
-		compatible = "samsung,s3c2440-uart";
-		reg = <0x5000C000 0x4000>;
-		interrupts = <1 18 24 4>, <1 18 25 4>;
-		clock-names = "uart", "clk_uart_baud2",
-				"clk_uart_baud3";
-		clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>,
-				<&clocks SCLK_UART>;
-		status = "disabled";
-	};
-
-	sdhci_1: mmc@4ac00000 {
-		compatible = "samsung,s3c6410-sdhci";
-		reg = <0x4AC00000 0x100>;
-		interrupts = <0 0 21 3>;
-		clock-names = "hsmmc", "mmc_busclk.0",
-				"mmc_busclk.2";
-		clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>,
-				<&clocks MUX_HSMMC0>;
-		status = "disabled";
-	};
-
-	sdhci_0: mmc@4a800000 {
-		compatible = "samsung,s3c6410-sdhci";
-		reg = <0x4A800000 0x100>;
-		interrupts = <0 0 20 3>;
-		clock-names = "hsmmc", "mmc_busclk.0",
-				"mmc_busclk.2";
-		clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>,
-				<&clocks MUX_HSMMC1>;
-		status = "disabled";
-	};
-};
-
-&i2c {
-	compatible = "samsung,s3c2440-i2c";
-	clocks = <&clocks PCLK_I2C0>;
-	clock-names = "i2c";
-};
-
-&intc {
-	compatible = "samsung,s3c2416-irq";
-};
-
-&pinctrl_0 {
-	compatible = "samsung,s3c2416-pinctrl";
-};
-
-&rtc {
-	compatible = "samsung,s3c2416-rtc";
-	clocks = <&clocks PCLK_RTC>;
-	clock-names = "rtc";
-};
-
-&timer {
-	clocks = <&clocks PCLK_PWM>;
-	clock-names = "timers";
-};
-
-&uart_0 {
-	compatible = "samsung,s3c2440-uart";
-	clock-names = "uart", "clk_uart_baud2",
-			"clk_uart_baud3";
-	clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
-			<&clocks SCLK_UART>;
-};
-
-&uart_1 {
-	compatible = "samsung,s3c2440-uart";
-	clock-names = "uart", "clk_uart_baud2",
-			"clk_uart_baud3";
-	clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
-			<&clocks SCLK_UART>;
-};
-
-&uart_2 {
-	compatible = "samsung,s3c2440-uart";
-	clock-names = "uart", "clk_uart_baud2",
-			"clk_uart_baud3";
-	clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>,
-			<&clocks SCLK_UART>;
-};
-
-&watchdog {
-	interrupts = <1 9 27 3>;
-	clocks = <&clocks PCLK_WDT>;
-	clock-names = "watchdog";
-};
diff --git a/arch/arm/boot/dts/s3c24xx.dtsi b/arch/arm/boot/dts/s3c24xx.dtsi
deleted file mode 100644
index 06f82c7e458e..000000000000
--- a/arch/arm/boot/dts/s3c24xx.dtsi
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's S3C24XX family device tree source
- *
- * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
- */
-
-/ {
-	compatible = "samsung,s3c24xx";
-	interrupt-parent = <&intc>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		pinctrl0 = &pinctrl_0;
-		serial0 = &uart_0;
-		serial1 = &uart_1;
-		serial2 = &uart_2;
-	};
-
-	intc: interrupt-controller@4a000000 {
-		compatible = "samsung,s3c2410-irq";
-		reg = <0x4a000000 0x100>;
-		interrupt-controller;
-		#interrupt-cells = <4>;
-	};
-
-	pinctrl_0: pinctrl@56000000 {
-		reg = <0x56000000 0x1000>;
-
-		wakeup-interrupt-controller {
-			compatible = "samsung,s3c2410-wakeup-eint";
-			interrupts = <0 0 0 3>,
-				     <0 0 1 3>,
-				     <0 0 2 3>,
-				     <0 0 3 3>,
-				     <0 0 4 4>,
-				     <0 0 5 4>;
-		};
-	};
-
-	timer: pwm@51000000 {
-		compatible = "samsung,s3c2410-pwm";
-		reg = <0x51000000 0x1000>;
-		interrupts = <0 0 10 3>, <0 0 11 3>, <0 0 12 3>, <0 0 13 3>, <0 0 14 3>;
-		#pwm-cells = <3>;
-	};
-
-	uart_0: serial@50000000 {
-		compatible = "samsung,s3c2410-uart";
-		reg = <0x50000000 0x4000>;
-		interrupts = <1 28 0 4>, <1 28 1 4>;
-		status = "disabled";
-	};
-
-	uart_1: serial@50004000 {
-		compatible = "samsung,s3c2410-uart";
-		reg = <0x50004000 0x4000>;
-		interrupts = <1 23 3 4>, <1 23 4 4>;
-		status = "disabled";
-	};
-
-	uart_2: serial@50008000 {
-		compatible = "samsung,s3c2410-uart";
-		reg = <0x50008000 0x4000>;
-		interrupts = <1 15 6 4>, <1 15 7 4>;
-		status = "disabled";
-	};
-
-	watchdog: watchdog@53000000 {
-		compatible = "samsung,s3c2410-wdt";
-		reg = <0x53000000 0x100>;
-		interrupts = <0 0 9 3>;
-		status = "disabled";
-	};
-
-	rtc: rtc@57000000 {
-		compatible = "samsung,s3c2410-rtc";
-		reg = <0x57000000 0x100>;
-		interrupts = <0 0 30 3>, <0 0 8 3>;
-		status = "disabled";
-	};
-
-	i2c: i2c@54000000 {
-		compatible = "samsung,s3c2410-i2c";
-		reg = <0x54000000 0x100>;
-		interrupts = <0 0 27 3>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig
deleted file mode 100644
index 337e5c9718ae..000000000000
--- a/arch/arm/configs/badge4_defconfig
+++ /dev/null
@@ -1,105 +0,0 @@
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-CONFIG_ARCH_MULTI_V4=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_BADGE4=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="init=/linuxrc root=/dev/mtdblock3"
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_FPE_NWFPE=y
-CONFIG_MODULES=y
-CONFIG_MODVERSIONS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BINFMT_MISC=m
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_BT=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIVHCI=m
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_SA1100=y
-CONFIG_PARPORT=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=m
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=y
-CONFIG_NETDEVICES=y
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_ELEKTOR=m
-CONFIG_WATCHDOG=y
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_SA1100_WATCHDOG=m
-CONFIG_SOUND=y
-CONFIG_SOUND_PRIME=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DEBUG=y
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_USS720=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=m
-CONFIG_MINIX_FS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_SMB_FS=m
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/cerfcube_defconfig b/arch/arm/configs/cerfcube_defconfig
deleted file mode 100644
index 9ada868e2648..000000000000
--- a/arch/arm/configs/cerfcube_defconfig
+++ /dev/null
@@ -1,73 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_ARCH_MULTI_V4=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_CERF=y
-CONFIG_SA1100_CERF_FLASH_16MB=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="console=ttySA0,38400 root=/dev/mtdblock3 rootfstype=jffs2 rw mem=32M init=/linuxrc"
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_FPE_FASTFPE=y
-CONFIG_PM=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_IPV6 is not set
-CONFIG_PCCARD=m
-CONFIG_PCMCIA_SA1100=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_SA1100=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_RAM=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_WATCHDOG=y
-CONFIG_SA1100_WATCHDOG=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_ROMFS_FS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V4=y
-CONFIG_SMB_FS=m
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig
deleted file mode 100644
index 95144e380b4b..000000000000
--- a/arch/arm/configs/cm_x300_defconfig
+++ /dev/null
@@ -1,163 +0,0 @@
-CONFIG_LOCALVERSION="-cm-x300"
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=18
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_CM_X300=y
-CONFIG_AEABI=y
-CONFIG_HIGHMEM=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=ubifs console=ttyS2,38400"
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_FPE_NWFPE=y
-CONFIG_APM_EMULATION=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIBTUSB=m
-CONFIG_LIB80211=m
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_MARVELL=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=0
-CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_PXA27x=m
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_DA9034 is not set
-CONFIG_TOUCHSCREEN_WM97XX=m
-# CONFIG_TOUCHSCREEN_WM9705 is not set
-# CONFIG_TOUCHSCREEN_WM9713 is not set
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_PXA=y
-CONFIG_SPI=y
-CONFIG_SPI_GPIO=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_PCA953X=y
-# CONFIG_HWMON is not set
-CONFIG_PMIC_DA903X=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_DA903X=y
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_TDO24M=y
-CONFIG_BACKLIGHT_DA903X=m
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_LOGO=y
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=m
-CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_PXA2XX_SOC_EM_X270=m
-CONFIG_HID_DRAGONRISE=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_TWINHAN=y
-CONFIG_HID_NTRIG=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_HID_GREENASIA=y
-CONFIG_HID_SMARTJOYPLUS=y
-CONFIG_HID_TOPSEED=y
-CONFIG_HID_THRUSTMASTER=y
-CONFIG_HID_ZEROPLUS=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=m
-CONFIG_MMC_PXA=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_V3020=y
-CONFIG_RTC_DRV_PXA=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_UBIFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_CIFS=m
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_T10DIF=y
-CONFIG_FONTS=y
-CONFIG_FONT_6x11=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_FS=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/cns3420vb_defconfig b/arch/arm/configs/cns3420vb_defconfig
deleted file mode 100644
index b3aab97c0728..000000000000
--- a/arch/arm/configs/cns3420vb_defconfig
+++ /dev/null
@@ -1,63 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CGROUPS=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_PERF_EVENTS is not set
-CONFIG_PROFILING=y
-CONFIG_ARCH_MULTI_V6=y
-CONFIG_ARCH_CNS3XXX=y
-CONFIG_MACH_CNS3420VB=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="console=ttyS0,38400 mem=128M root=/dev/mmcblk0p1 ro rootwait"
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_IOSCHED_BFQ=m
-#CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_DEBUG_CNS3XXX=y
-CONFIG_AEABI=y
-# CONFIG_SWAP is not set
-CONFIG_SLAB=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=20000
-CONFIG_BLK_DEV_SD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ATA=y
-# CONFIG_SATA_PMP is not set
-# CONFIG_ATA_SFF is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_LEGACY_PTY_COUNT=16
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_FSCACHE=y
-CONFIG_TMPFS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_ARM_UNWIND is not set
-CONFIG_CRC_CCITT=y
-CONFIG_DEBUG_FS=y
diff --git a/arch/arm/configs/colibri_pxa270_defconfig b/arch/arm/configs/colibri_pxa270_defconfig
deleted file mode 100644
index 8357d721c69c..000000000000
--- a/arch/arm/configs/colibri_pxa270_defconfig
+++ /dev/null
@@ -1,157 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_PREEMPT=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_COLIBRI=y
-CONFIG_AEABI=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_SLAB=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_VLAN_8021Q=m
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_CFG80211=y
-CONFIG_CONNECTOR=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_LE_BYTE_SWAP=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PXA2XX=y
-CONFIG_MTD_BLOCK2MTD=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_DISKONCHIP=y
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
-CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=8
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_DM9000=y
-CONFIG_PHYLIB=y
-CONFIG_HOSTAP=y
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_MOUSE_PS2 is not set
-CONFIG_MOUSE_SERIAL=m
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_PXA=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_LOGO=y
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_SERIAL=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_MMC=y
-CONFIG_NEW_LEDS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_PCF8583=m
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=1
-CONFIG_JFFS2_FS_WBUF_VERIFY=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V4=y
-CONFIG_NLS_DEFAULT="iso8859-15"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_KEYS=y
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-CONFIG_LIBCRC32C=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/colibri_pxa300_defconfig b/arch/arm/configs/colibri_pxa300_defconfig
deleted file mode 100644
index 42adfefdb6dc..000000000000
--- a/arch/arm/configs/colibri_pxa300_defconfig
+++ /dev/null
@@ -1,60 +0,0 @@
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_COLIBRI300=y
-CONFIG_AEABI=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="console=ttyS0,115200 rw"
-CONFIG_CPU_IDLE=y
-CONFIG_FPE_NWFPE=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_SYN_COOKIES=y
-CONFIG_IPV6=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_AX88796=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_DEBUG_GPIO=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_MON=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_PXA=y
-CONFIG_EXT3_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_AES=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
deleted file mode 100644
index df84640f4f57..000000000000
--- a/arch/arm/configs/corgi_defconfig
+++ /dev/null
@@ -1,247 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_PREEMPT=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_PROFILING=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_PXA_SHARPSL=y
-CONFIG_MACH_POODLE=y
-CONFIG_MACH_CORGI=y
-CONFIG_MACH_SHEPHERD=y
-CONFIG_MACH_HUSKY=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
-CONFIG_FPE_NWFPE=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BINFMT_MISC=m
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_INET=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIDTL1=m
-CONFIG_BT_HCIBT3C=m
-CONFIG_BT_HCIBLUECARD=m
-CONFIG_BT_HCIBTUART=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_PXA2XX=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_ROM=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_SHARPSL=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ATA=y
-CONFIG_PATA_PCMCIA=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_NET_PCMCIA=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_PXA=y
-CONFIG_SPI=y
-CONFIG_SPI_PXA2XX=y
-CONFIG_FB=y
-CONFIG_FB_W100=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_CORGI=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SOUND_PRIME=y
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_EZKEY=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_LOGITECH=m
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_PANTHERLORD=m
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_SUNPLUS=m
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
-CONFIG_USB=m
-CONFIG_USB_MON=m
-CONFIG_USB_SL811_HCD=m
-CONFIG_USB_SL811_CS=m
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_CYTHERM=m
-CONFIG_USB_IDMOUSE=m
-CONFIG_USB_GADGET=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_MMC=y
-CONFIG_MMC_PXA=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_CRAMFS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_NFS_V4=m
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=m
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_FTRACE is not set
diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig
deleted file mode 100644
index b4c2e6457e04..000000000000
--- a/arch/arm/configs/eseries_pxa_defconfig
+++ /dev/null
@@ -1,97 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-# CONFIG_KALLSYMS is not set
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_ARCH_PXA_ESERIES=y
-CONFIG_IWMMXT=y
-CONFIG_AEABI=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_SLAB=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_CFG80211=m
-CONFIG_MAC80211=m
-CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_PCCARD=y
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_PXA2XX=m
-# CONFIG_STANDALONE is not set
-CONFIG_MTD=m
-CONFIG_MTD_RAW_NAND=m
-CONFIG_MTD_NAND_TMIO=m
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=m
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=m
-# CONFIG_SATA_PMP is not set
-CONFIG_PATA_PCMCIA=m
-CONFIG_NETDEVICES=y
-CONFIG_HERMES=m
-CONFIG_PCMCIA_HERMES=m
-CONFIG_NET_PCMCIA=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=m
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_WM97XX=m
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_PXA=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_MFD_T7L66XB=y
-CONFIG_MFD_TC6387XB=y
-CONFIG_MFD_TC6393XB=y
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-CONFIG_FB_W100=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_VERBOSE_PRINTK=y
-# CONFIG_SND_PCMCIA is not set
-CONFIG_SND_SOC=m
-CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_PXA2XX_SOC_E800=m
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_TMIO=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig
deleted file mode 100644
index ef7b0a0aee3a..000000000000
--- a/arch/arm/configs/ezx_defconfig
+++ /dev/null
@@ -1,389 +0,0 @@
-CONFIG_LOCALVERSION="-ezx200910312315"
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_EXPERT=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_PXA_EZX=y
-CONFIG_AEABI=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
-CONFIG_KEXEC=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_IDLE=y
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_APM_EMULATION=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_BINFMT_MISC=m
-CONFIG_SLAB=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_IPV6_SUBTREES=y
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_SCTP=y
-CONFIG_NF_CT_PROTO_UDPLITE=y
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NF_NAT=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_LED=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_BRIDGE=m
-CONFIG_BT=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=y
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=y
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIBTSDIO=m
-CONFIG_BT_HCIUART=y
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_BT_MRVL=m
-CONFIG_BT_MRVL_SDIO=m
-# CONFIG_WIRELESS is not set
-CONFIG_FW_LOADER=m
-CONFIG_CONNECTOR=m
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_OTP=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PXA2XX=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_WLAN is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_PXA27x=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_PCAP=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=y
-CONFIG_INPUT_PCAP=y
-# CONFIG_SERIO is not set
-CONFIG_LEGACY_PTY_COUNT=8
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_PXA=y
-CONFIG_SPI=y
-CONFIG_SPI_PXA2XX=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
-CONFIG_EZX_PCAP=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_DEBUG=y
-CONFIG_REGULATOR_PCAP=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-CONFIG_MEDIA_TUNER_CUSTOMISE=y
-CONFIG_RADIO_TEA5764=y
-# CONFIG_MEDIA_TUNER_MC44S803 is not set
-# CONFIG_MEDIA_TUNER_MT2060 is not set
-# CONFIG_MEDIA_TUNER_MT20XX is not set
-# CONFIG_MEDIA_TUNER_MT2131 is not set
-# CONFIG_MEDIA_TUNER_MT2266 is not set
-# CONFIG_MEDIA_TUNER_MXL5005S is not set
-# CONFIG_MEDIA_TUNER_MXL5007T is not set
-# CONFIG_MEDIA_TUNER_QT1010 is not set
-# CONFIG_MEDIA_TUNER_SIMPLE is not set
-# CONFIG_MEDIA_TUNER_TDA18271 is not set
-# CONFIG_MEDIA_TUNER_TDA827X is not set
-# CONFIG_MEDIA_TUNER_TDA8290 is not set
-# CONFIG_MEDIA_TUNER_TDA9887 is not set
-# CONFIG_MEDIA_TUNER_TEA5761 is not set
-# CONFIG_MEDIA_TUNER_TEA5767 is not set
-# CONFIG_MEDIA_TUNER_XC2028 is not set
-# CONFIG_MEDIA_TUNER_XC5000 is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-CONFIG_VIDEO_PXA27x=y
-# CONFIG_V4L_USB_DRIVERS is not set
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-CONFIG_FB_PXA_OVERLAY=y
-CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_PWM=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_PXA2XX_SOC=y
-CONFIG_HID_APPLE=m
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_PXA27X=y
-CONFIG_USB_ETH=m
-# CONFIG_USB_ETH_RNDIS is not set
-CONFIG_MMC=y
-CONFIG_SDIO_UART=m
-CONFIG_MMC_PXA=y
-CONFIG_MMC_SPI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_LP3944=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PCAP=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=m
-CONFIG_REISERFS_FS=m
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_XFS_FS=m
-CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=m
-CONFIG_CUSE=m
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-CONFIG_ROMFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3_ACL=y
-CONFIG_SMB_FS=m
-CONFIG_CIFS=m
-CONFIG_CIFS_STATS=y
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_VMAC=m
-CONFIG_CRYPTO_GHASH=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_FS=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_PROVE_LOCKING=y
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/h5000_defconfig b/arch/arm/configs/h5000_defconfig
deleted file mode 100644
index d01f1a6bd04d..000000000000
--- a/arch/arm/configs/h5000_defconfig
+++ /dev/null
@@ -1,74 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-# CONFIG_UID16 is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_H5000=y
-CONFIG_AEABI=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="keepinitrd"
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_APM_EMULATION=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_SLAB=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_LEGACY_PTY_COUNT=32
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-# CONFIG_USB_ETH_RNDIS is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SA1100=y
-CONFIG_EXT2_FS=y
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-# CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=y
-CONFIG_PRINTK_TIME=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_FTRACE is not set
diff --git a/arch/arm/configs/hackkit_defconfig b/arch/arm/configs/hackkit_defconfig
deleted file mode 100644
index 3c91a851fd08..000000000000
--- a/arch/arm/configs/hackkit_defconfig
+++ /dev/null
@@ -1,48 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_ARCH_MULTI_V4=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_HACKKIT=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="console=ttySA0,115200 root=/dev/ram0 initrd=0xc0400000,8M init=/rootshell"
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_FPE_NWFPE=y
-CONFIG_MODULES=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=3
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-# CONFIG_CRC32 is not set
diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig
deleted file mode 100644
index 19e30e790d35..000000000000
--- a/arch/arm/configs/iop32x_defconfig
+++ /dev/null
@@ -1,126 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_IOP32X=y
-CONFIG_MACH_GLANTANK=y
-CONFIG_ARCH_IQ80321=y
-CONFIG_ARCH_IQ31244=y
-CONFIG_MACH_N2100=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc"
-CONFIG_FPE_NWFPE=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_SLAB=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ATA=y
-CONFIG_SATA_SIL=y
-CONFIG_SATA_VITESSE=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=y
-CONFIG_MD_RAID456=y
-CONFIG_BLK_DEV_DM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_E100=y
-CONFIG_E1000=y
-CONFIG_R8169=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IOP3XX=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RS5C372=y
-CONFIG_DMADEVICES=y
-CONFIG_INTEL_IOP_ADMA=y
-CONFIG_NET_DMA=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_TMPFS=y
-CONFIG_ECRYPT_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_KEYS=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_WP512=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ANUBIS=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_SERPENT=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_LIBCRC32C=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_UART_8250=y
diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig
index ae1d68da4f2a..91bdcc095884 100644
--- a/arch/arm/configs/jornada720_defconfig
+++ b/arch/arm/configs/jornada720_defconfig
@@ -6,7 +6,6 @@ CONFIG_ARCH_MULTI_V4=y
 CONFIG_ARCH_SA1100=y
 CONFIG_SA1100_JORNADA720=y
 CONFIG_SA1100_JORNADA720_SSP=y
-CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_FPE_NWFPE=y
 CONFIG_PM=y
 CONFIG_MODULES=y
diff --git a/arch/arm/configs/lart_defconfig b/arch/arm/configs/lart_defconfig
deleted file mode 100644
index 916177d07a39..000000000000
--- a/arch/arm/configs/lart_defconfig
+++ /dev/null
@@ -1,64 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_ARCH_MULTI_V4=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_LART=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="console=ttySA0,9600 root=/dev/ram"
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_MODULES=y
-CONFIG_NET=y
-CONFIG_PACKET=m
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=1
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_LART=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_NET_ETHERNET=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_ASYNC=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=m
-CONFIG_REISERFS_FS=m
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_UDF_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=1
-CONFIG_CRAMFS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFSD=m
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_USER=y
-CONFIG_CRC32=m
diff --git a/arch/arm/configs/lpd270_defconfig b/arch/arm/configs/lpd270_defconfig
deleted file mode 100644
index b0c21a99a0a8..000000000000
--- a/arch/arm/configs/lpd270_defconfig
+++ /dev/null
@@ -1,58 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_LOGICPD_PXA270=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
-CONFIG_FPE_NWFPE=y
-CONFIG_MODULES=y
-CONFIG_SLAB=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_PXA2XX_AC97=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/lubbock_defconfig b/arch/arm/configs/lubbock_defconfig
deleted file mode 100644
index 4fc744c96196..000000000000
--- a/arch/arm/configs/lubbock_defconfig
+++ /dev/null
@@ -1,53 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_ARCH_LUBBOCK=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
-CONFIG_FPE_NWFPE=y
-CONFIG_MODULES=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_PXA2XX=y
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_PCNET=y
-CONFIG_SMC91X=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_SA1111=y
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_G_SERIAL=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
deleted file mode 100644
index 5a8776f6aba3..000000000000
--- a/arch/arm/configs/magician_defconfig
+++ /dev/null
@@ -1,151 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_PREEMPT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_UID16 is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_H4700=y
-CONFIG_MACH_MAGICIAN=y
-CONFIG_AEABI=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="keepinitrd"
-CONFIG_KEXEC=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SLAB=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIBTUSB=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_NETDEVICES=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_MPPE=m
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_PPP_ASYNC=m
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_PXA=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_PXA=y
-CONFIG_W1_MASTER_DS1WM=y
-CONFIG_HTC_EGPIO=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PDA_POWER=y
-CONFIG_BATTERY_DS2760=y
-# CONFIG_HWMON is not set
-CONFIG_MFD_ASIC3=y
-CONFIG_HTC_PASIC3=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-CONFIG_FB_PXA_OVERLAY=y
-CONFIG_FB_W100=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_PWM=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_SOUND=y
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=m
-CONFIG_SND_PXA2XX_SOC=m
-CONFIG_USB=y
-CONFIG_USB_MON=m
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GPIO_VBUS=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_VBUS_DRAW=500
-CONFIG_USB_PXA27X=y
-CONFIG_USB_ETH=m
-# CONFIG_USB_ETH_RNDIS is not set
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_MMC=y
-CONFIG_SDIO_UART=m
-CONFIG_MMC_PXA=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DEBUG=y
-CONFIG_RTC_DRV_PXA=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/mainstone_defconfig b/arch/arm/configs/mainstone_defconfig
deleted file mode 100644
index 096cd7bc667a..000000000000
--- a/arch/arm/configs/mainstone_defconfig
+++ /dev/null
@@ -1,51 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_MAINSTONE=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
-CONFIG_FPE_NWFPE=y
-CONFIG_MODULES=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig
deleted file mode 100644
index 86e00f684e16..000000000000
--- a/arch/arm/configs/mini2440_defconfig
+++ /dev/null
@@ -1,338 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_ARCH_MULTI_V4T=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_S3C24XX=y
-CONFIG_S3C_ADC=y
-# CONFIG_CPU_S3C2410 is not set
-CONFIG_CPU_S3C2440=y
-CONFIG_MACH_MINI2440=y
-CONFIG_AEABI=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_KEXEC=y
-CONFIG_CPU_IDLE=y
-CONFIG_APM_EMULATION=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_BLK_DEV_INTEGRITY=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-CONFIG_BINFMT_MISC=m
-# CONFIG_COMPAT_BRK is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_DIAG=m
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_NET_PKTGEN=m
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIBTSDIO=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_CFG80211=m
-CONFIG_MAC80211=m
-CONFIG_MAC80211_MESH=y
-CONFIG_MAC80211_LEDS=y
-CONFIG_CONNECTOR=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_FTL=y
-CONFIG_NFTL=y
-CONFIG_NFTL_RW=y
-CONFIG_INFTL=y
-CONFIG_RFD_FTL=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_ROM=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_S3C2410=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_MTD_LPDDR=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_SENSORS_TSL2550=m
-CONFIG_EEPROM_AT24=y
-CONFIG_SCSI=m
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_SG=m
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_TUN=m
-CONFIG_DM9000=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_MPPE=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_ZD1211RW=m
-CONFIG_ZD1211RW_DEBUG=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=m
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_SERIO_RAW=y
-CONFIG_LEGACY_PTY_COUNT=128
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_DEV_BUS=m
-CONFIG_IPMI_HANDLER=m
-CONFIG_IPMI_DEVICE_INTERFACE=m
-CONFIG_IPMI_SI=m
-CONFIG_IPMI_WATCHDOG=m
-CONFIG_IPMI_POWEROFF=m
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_S3C2410=y
-CONFIG_I2C_SIMTEC=y
-CONFIG_SPI=y
-CONFIG_SPI_S3C24XX=y
-CONFIG_SPI_SPIDEV=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_SENSORS_LM75=y
-CONFIG_THERMAL=y
-CONFIG_WATCHDOG=y
-CONFIG_S3C2410_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_FB_S3C2410=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_PLATFORM=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_PWM=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SND_USB_CAIAQ=m
-CONFIG_SND_USB_CAIAQ_INPUT=y
-CONFIG_SND_SOC=y
-CONFIG_HIDRAW=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_NTRIG=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_HID_TOPSEED=y
-CONFIG_HID_PID=y
-CONFIG_USB_HIDDEV=y
-CONFIG_USB=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_ACM=m
-CONFIG_USB_WDM=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_ISD200=m
-CONFIG_USB_STORAGE_USBAT=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_STORAGE_ALAUDA=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_CP210X=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_SPCP8X5=m
-CONFIG_USB_GADGET=y
-CONFIG_USB_S3C2410=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_MMC=y
-CONFIG_SDIO_UART=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SPI=y
-CONFIG_MMC_S3C=y
-CONFIG_LEDS_S3C24XX=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_RTC_DRV_S3C=y
-CONFIG_DMADEVICES=y
-CONFIG_S3C24XX_DMAC=y
-CONFIG_PWM=y
-CONFIG_PWM_SAMSUNG=y
-CONFIG_EXT2_FS=m
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BOTH=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_RMD128=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_RMD256=m
-CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_LZO=m
-CONFIG_LIBCRC32C=m
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_MINI_4x6=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_FS=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
index 877c5150a987..3a1088079514 100644
--- a/arch/arm/configs/mv78xx0_defconfig
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -11,13 +11,10 @@ CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V6 is not set
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MV78XX0=y
-CONFIG_MACH_DB78X00_BP=y
-CONFIG_MACH_RD78X00_MASA=y
 CONFIG_MACH_TERASTATION_WXL=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_FPE_NWFPE=y
-CONFIG_UNUSED_BOARD_FILES=y
 CONFIG_VFP=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
index 246f1bba7df5..53dd0717cea5 100644
--- a/arch/arm/configs/omap1_defconfig
+++ b/arch/arm/configs/omap1_defconfig
@@ -20,8 +20,6 @@ CONFIG_ARCH_OMAP=y
 CONFIG_ARCH_OMAP1=y
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP730=y
-CONFIG_ARCH_OMAP850=y
 CONFIG_ARCH_OMAP16XX=y
 # CONFIG_OMAP_MUX is not set
 CONFIG_OMAP_RESET_CLOCKS=y
diff --git a/arch/arm/configs/palmz72_defconfig b/arch/arm/configs/palmz72_defconfig
deleted file mode 100644
index a9a808bc2f70..000000000000
--- a/arch/arm/configs/palmz72_defconfig
+++ /dev/null
@@ -1,75 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_PREEMPT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_ARCH_PXA_PALM=y
-# CONFIG_MACH_PALMTX is not set
-CONFIG_AEABI=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="mem=32M console=tty root=/dev/mmcblk0"
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_APM_EMULATION=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SLAB=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_PXA27x=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_PXA=y
-CONFIG_SPI=y
-CONFIG_SPI_SPIDEV=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PDA_POWER=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_PWM=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_MMC_PXA=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PXA=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=866
-CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
-CONFIG_TMPFS=y
-# CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_866=y
-CONFIG_NLS_UTF8=y
-CONFIG_CRC_T10DIF=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/pcm027_defconfig b/arch/arm/configs/pcm027_defconfig
deleted file mode 100644
index a392312a13ce..000000000000
--- a/arch/arm/configs/pcm027_defconfig
+++ /dev/null
@@ -1,90 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-# CONFIG_KALLSYMS is not set
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_PCM027=y
-CONFIG_MACH_PCM990_BASEBOARD=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_SWAP is not set
-CONFIG_SLAB=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_BLK_DEV is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_PXA=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PXA2XX_AC97=y
-CONFIG_USB=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_PXA=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PCF8563=m
-CONFIG_RTC_DRV_PXA=m
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-# CONFIG_DNOTIFY is not set
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_DEFAULT="iso8859-15"
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/arm/configs/pleb_defconfig b/arch/arm/configs/pleb_defconfig
deleted file mode 100644
index fd2667873273..000000000000
--- a/arch/arm/configs/pleb_defconfig
+++ /dev/null
@@ -1,53 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_HOTPLUG is not set
-# CONFIG_SHMEM is not set
-CONFIG_ARCH_MULTI_V4=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_PLEB=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="console=ttySA0,9600 mem=16M@0xc0000000 mem=16M@0xc8000000 root=/dev/ram initrd=0xc0400000,4M"
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_FPE_NWFPE=y
-CONFIG_MODULES=y
-# CONFIG_SWAP is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_SA1100=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NLS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
diff --git a/arch/arm/configs/pxa168_defconfig b/arch/arm/configs/pxa168_defconfig
index 826ebbef2e3c..8422ddc9bab2 100644
--- a/arch/arm/configs/pxa168_defconfig
+++ b/arch/arm/configs/pxa168_defconfig
@@ -1,9 +1,6 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_MACH_ASPENITE=y
-CONFIG_MACH_ZYLONITE2=y
-CONFIG_MACH_AVENGERS_LITE=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
diff --git a/arch/arm/configs/pxa255-idp_defconfig b/arch/arm/configs/pxa255-idp_defconfig
deleted file mode 100644
index ae0444949a87..000000000000
--- a/arch/arm/configs/pxa255-idp_defconfig
+++ /dev/null
@@ -1,55 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_ARCH_PXA_IDP=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="root=/dev/nfs ip=dhcp console=ttyS0,115200 mem=64M"
-CONFIG_FPE_NWFPE=y
-CONFIG_MODULES=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/pxa910_defconfig b/arch/arm/configs/pxa910_defconfig
index 353008de5678..48e41ca582af 100644
--- a/arch/arm/configs/pxa910_defconfig
+++ b/arch/arm/configs/pxa910_defconfig
@@ -11,8 +11,6 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_MACH_TAVOREVB=y
-CONFIG_MACH_TTC_DKB=y
 CONFIG_AEABI=y
 CONFIG_FPE_NWFPE=y
 CONFIG_SLAB=y
diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
index 0a0f12df40b5..74c7145c79ea 100644
--- a/arch/arm/configs/pxa_defconfig
+++ b/arch/arm/configs/pxa_defconfig
@@ -19,7 +19,6 @@ CONFIG_ARCH_GUMSTIX=y
 CONFIG_PXA_SHARPSL=y
 CONFIG_MACH_AKITA=y
 CONFIG_MACH_BORZOI=y
-CONFIG_PXA_SYSTEMS_CPLDS=y
 CONFIG_AEABI=y
 CONFIG_ARCH_FORCE_MAX_ORDER=9
 CONFIG_CMDLINE="root=/dev/ram0 ro"
@@ -397,9 +396,7 @@ CONFIG_FB_VIRTUAL=m
 CONFIG_FB_SIMPLE=y
 CONFIG_LCD_CORGI=m
 CONFIG_LCD_PLATFORM=m
-CONFIG_LCD_TOSA=m
 CONFIG_BACKLIGHT_PWM=m
-CONFIG_BACKLIGHT_TOSA=m
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_LOGO=y
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
deleted file mode 100644
index 41b40863a78e..000000000000
--- a/arch/arm/configs/s3c2410_defconfig
+++ /dev/null
@@ -1,437 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=m
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_ARCH_MULTI_V4T=y
-CONFIG_ARCH_MULTI_V5=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_S3C24XX=y
-CONFIG_S3C_ADC=y
-CONFIG_CPU_S3C2412=y
-CONFIG_CPU_S3C2416=y
-CONFIG_CPU_S3C2440=y
-CONFIG_CPU_S3C2442=y
-CONFIG_CPU_S3C2443=y
-CONFIG_MACH_AML_M5900=y
-CONFIG_ARCH_BAST=y
-CONFIG_ARCH_H1940=y
-CONFIG_MACH_N30=y
-CONFIG_MACH_OTOM=y
-CONFIG_MACH_QT2410=y
-CONFIG_ARCH_SMDK2410=y
-CONFIG_MACH_TCT_HAMMER=y
-CONFIG_MACH_VR1000=y
-CONFIG_MACH_JIVE=y
-CONFIG_MACH_SMDK2412=y
-CONFIG_MACH_VSTMS=y
-CONFIG_MACH_SMDK2416=y
-CONFIG_MACH_ANUBIS=y
-CONFIG_MACH_AT2440EVB=y
-CONFIG_MACH_MINI2440=y
-CONFIG_MACH_NEXCODER_2440=y
-CONFIG_MACH_OSIRIS=y
-CONFIG_MACH_OSIRIS_DVS=m
-CONFIG_MACH_RX3715=y
-CONFIG_ARCH_S3C2440=y
-CONFIG_MACH_NEO1973_GTA02=y
-CONFIG_MACH_RX1950=y
-CONFIG_MACH_SMDK2443=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_APM_EMULATION=m
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_SLAB=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_NET_IPIP=m
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_TCP_CONG_ADVANCED=y
-CONFIG_TCP_CONG_HSTCP=m
-CONFIG_TCP_CONG_HYBLA=m
-CONFIG_TCP_CONG_SCALABLE=m
-CONFIG_TCP_CONG_LP=m
-CONFIG_TCP_CONG_VENO=m
-CONFIG_TCP_CONG_YEAH=m
-CONFIG_TCP_CONG_ILLINOIS=m
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_LED=m
-CONFIG_NETFILTER_XT_TARGET_LOG=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_IP_VS=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_CFG80211=m
-CONFIG_MAC80211=m
-CONFIG_MAC80211_MESH=y
-CONFIG_MAC80211_LEDS=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_ROM=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_S3C2410=y
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_AX88796=m
-CONFIG_PARPORT_1284=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_ATA_OVER_ETH=m
-CONFIG_EEPROM_AT24=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CHR_DEV_SCH=m
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_ATA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_DM9000=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_MOUSE_APPLETOUCH=m
-CONFIG_MOUSE_BCM5974=m
-CONFIG_INPUT_JOYSTICK=y
-CONFIG_JOYSTICK_ANALOG=m
-CONFIG_JOYSTICK_A3D=m
-CONFIG_JOYSTICK_ADI=m
-CONFIG_JOYSTICK_COBRA=m
-CONFIG_JOYSTICK_GF2K=m
-CONFIG_JOYSTICK_GRIP=m
-CONFIG_JOYSTICK_GRIP_MP=m
-CONFIG_JOYSTICK_GUILLEMOT=m
-CONFIG_JOYSTICK_INTERACT=m
-CONFIG_JOYSTICK_SIDEWINDER=m
-CONFIG_JOYSTICK_TMDC=m
-CONFIG_JOYSTICK_IFORCE=m
-CONFIG_JOYSTICK_MAGELLAN=m
-CONFIG_JOYSTICK_SPACEORB=m
-CONFIG_JOYSTICK_SPACEBALL=m
-CONFIG_JOYSTICK_STINGER=m
-CONFIG_JOYSTICK_TWIDJOY=m
-CONFIG_JOYSTICK_ZHENHUA=m
-CONFIG_JOYSTICK_DB9=m
-CONFIG_JOYSTICK_GAMECON=m
-CONFIG_JOYSTICK_TURBOGRAFX=m
-CONFIG_JOYSTICK_JOYDUMP=m
-CONFIG_JOYSTICK_XPAD=m
-CONFIG_JOYSTICK_XPAD_FF=y
-CONFIG_JOYSTICK_XPAD_LEDS=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_ATI_REMOTE2=m
-CONFIG_INPUT_KEYSPAN_REMOTE=m
-CONFIG_INPUT_POWERMATE=m
-CONFIG_INPUT_YEALINK=m
-CONFIG_INPUT_CM109=m
-CONFIG_INPUT_UINPUT=m
-CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=8
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_SERIAL_DEV_BUS=m
-CONFIG_PRINTER=y
-CONFIG_PPDEV=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_S3C2410=y
-CONFIG_I2C_SIMTEC=y
-CONFIG_SPI=y
-CONFIG_SPI_GPIO=m
-CONFIG_SPI_S3C24XX=m
-CONFIG_SPI_SPIDEV=m
-CONFIG_SPI_TLE62X0=m
-CONFIG_SENSORS_LM75=m
-CONFIG_SENSORS_LM78=m
-CONFIG_SENSORS_LM85=m
-CONFIG_WATCHDOG=y
-CONFIG_S3C2410_WATCHDOG=y
-CONFIG_MFD_SM501=y
-CONFIG_TPS65010=y
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_S3C2410=y
-CONFIG_FB_SM501=y
-CONFIG_BACKLIGHT_PWM=m
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_SEQUENCER=m
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SND_USB_CAIAQ=m
-CONFIG_SND_SOC=y
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_WDM=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_FREECOM=m
-CONFIG_USB_STORAGE_ISD200=m
-CONFIG_USB_STORAGE_USBAT=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_STORAGE_ALAUDA=m
-CONFIG_USB_STORAGE_ONETOUCH=m
-CONFIG_USB_STORAGE_KARMA=m
-CONFIG_USB_STORAGE_CYPRESS_ATACB=m
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_USS720=m
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_FTDI_SIO=y
-CONFIG_USB_SERIAL_NAVMAN=m
-CONFIG_USB_SERIAL_PL2303=y
-CONFIG_USB_SERIAL_OPTION=m
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_ADUTUX=m
-CONFIG_USB_SEVSEG=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_CYPRESS_CY7C63=m
-CONFIG_USB_CYTHERM=m
-CONFIG_USB_IDMOUSE=m
-CONFIG_USB_FTDI_ELAN=m
-CONFIG_USB_APPLEDISPLAY=m
-CONFIG_USB_LD=m
-CONFIG_USB_TRANCEVIBRATOR=m
-CONFIG_USB_IOWARRIOR=m
-CONFIG_USB_TEST=m
-CONFIG_MMC=y
-CONFIG_SDIO_UART=m
-CONFIG_MMC_TEST=m
-CONFIG_MMC_SDHCI=m
-CONFIG_MMC_SPI=m
-CONFIG_MMC_S3C=y
-CONFIG_LEDS_S3C24XX=m
-CONFIG_LEDS_PCA9532=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_PCA955X=m
-CONFIG_LEDS_DAC124S085=m
-CONFIG_LEDS_PWM=m
-CONFIG_LEDS_BD2802=m
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_LEDS_TRIGGER_GPIO=m
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_S3C=y
-CONFIG_DMADEVICES=y
-CONFIG_S3C24XX_DMAC=y
-CONFIG_PWM=y
-CONFIG_PWM_SAMSUNG=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=m
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CONFIGFS_FS=m
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_CRAMFS=y
-CONFIG_SQUASHFS=m
-CONFIG_ROMFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_CIFS=m
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/shannon_defconfig b/arch/arm/configs/shannon_defconfig
deleted file mode 100644
index dfcea70b8034..000000000000
--- a/arch/arm/configs/shannon_defconfig
+++ /dev/null
@@ -1,45 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_ARCH_MULTI_V4=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_SHANNON=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="console=ttySA0,9600 console=tty1 root=/dev/mtdblock2 init=/linuxrc"
-CONFIG_FPE_NWFPE=y
-CONFIG_MODULES=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_SA1100=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_PCNET=y
-CONFIG_PCMCIA_SMC91C92=y
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_WATCHDOG=y
-CONFIG_SA1100_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_SA1100=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/simpad_defconfig b/arch/arm/configs/simpad_defconfig
deleted file mode 100644
index 4e00a4c2c287..000000000000
--- a/arch/arm/configs/simpad_defconfig
+++ /dev/null
@@ -1,100 +0,0 @@
-CONFIG_LOCALVERSION="oe1"
-CONFIG_SYSVIPC=y
-CONFIG_PREEMPT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_ARCH_MULTI_V4=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_SA1100=y
-CONFIG_SA1100_SIMPAD=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="mtdparts=sa1100:512k(boot),1m(kernel),-(root) console=ttySA0 root=1f02 noinitrd mem=64M jffs2_orphaned_inodes=delete rootfstype=jffs2"
-CONFIG_FPE_NWFPE=y
-CONFIG_MODULES=y
-CONFIG_BINFMT_MISC=m
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_SA1100=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_SA1100=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPPOE=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=600
-CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_EVBUG=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIO=m
-CONFIG_SERIAL_SA1100=y
-CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_FB=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-CONFIG_REISERFS_FS=m
-CONFIG_REISERFS_PROC_INFO=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_SMB_FS=m
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig
deleted file mode 100644
index 6bd38b6f22c4..000000000000
--- a/arch/arm/configs/tct_hammer_defconfig
+++ /dev/null
@@ -1,59 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_ELF_CORE is not set
-# CONFIG_SHMEM is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_KALLSYMS is not set
-CONFIG_ARCH_MULTI_V4T=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_S3C24XX=y
-CONFIG_MACH_TCT_HAMMER=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="mem=64M root=/dev/ram0 init=/linuxrc rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_SWAP is not set
-CONFIG_SLUB=y
-CONFIG_SLUB_TINY=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=10240
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT_CONSOLE is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_S3C2410=y
-CONFIG_USB_ETH=m
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-# CONFIG_PROC_SYSCTL is not set
-CONFIG_JFFS2_FS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_CRC_CCITT=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig
deleted file mode 100644
index 009abe1e49ef..000000000000
--- a/arch/arm/configs/trizeps4_defconfig
+++ /dev/null
@@ -1,207 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_PREEMPT=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_TRIZEPS_PXA=y
-CONFIG_MACH_TRIZEPS4=y
-CONFIG_AEABI=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="root=fe01 console=ttyS0,38400n8 loglevel=5"
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_PM=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_LDM_PARTITION=y
-CONFIG_SLAB=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_VLAN_8021Q=m
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_CFG80211=y
-CONFIG_PCCARD=y
-# CONFIG_PCMCIA_LOAD_CIS is not set
-CONFIG_PCMCIA_PXA2XX=y
-CONFIG_CONNECTOR=y
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_LE_BYTE_SWAP=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_BLOCK2MTD=y
-CONFIG_MTD_DOC2000=y
-CONFIG_MTD_DOC2001=y
-CONFIG_MTD_DOC2001PLUS=y
-CONFIG_MTD_DOCPROBE_ADVANCED=y
-CONFIG_MTD_DOCPROBE_ADDRESS=0x4000000
-CONFIG_MTD_DOCPROBE_HIGH=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_DISKONCHIP=y
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
-CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=8
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_ATA=m
-CONFIG_PATA_PCMCIA=m
-CONFIG_PATA_PLATFORM=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_DM9000=y
-CONFIG_PHYLIB=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_MPPE=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_HOSTAP=y
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_HOSTAP_CS=y
-CONFIG_HERMES=y
-CONFIG_PCMCIA_HERMES=y
-CONFIG_PCMCIA_SPECTRUM=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_MOUSE_PS2 is not set
-CONFIG_MOUSE_SERIAL=m
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_PXA=y
-CONFIG_I2C_PXA_SLAVE=y
-CONFIG_WATCHDOG=y
-CONFIG_SA1100_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_PXA=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_DEBUG=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_PXA2XX_AC97=y
-CONFIG_SND_USB_AUDIO=m
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_MMC=y
-CONFIG_MMC_PXA=y
-CONFIG_NEW_LEDS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_PCF8583=m
-CONFIG_RTC_DRV_PXA=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V4=y
-CONFIG_SMB_FS=m
-CONFIG_CIFS=m
-CONFIG_NLS_DEFAULT="iso8859-15"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_KEYS=y
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-CONFIG_LIBCRC32C=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig
deleted file mode 100644
index 02f9849893b2..000000000000
--- a/arch/arm/configs/viper_defconfig
+++ /dev/null
@@ -1,160 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=13
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_EXPERT=y
-# CONFIG_ELF_CORE is not set
-# CONFIG_SHMEM is not set
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_ARCH_VIPER=y
-CONFIG_IWMMXT=y
-CONFIG_AEABI=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200"
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_FPE_FASTFPE=y
-CONFIG_PM=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_SWAP is not set
-CONFIG_SLAB=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_IPV6 is not set
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_PCCARD=m
-CONFIG_PCMCIA_PXA2XX=m
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=0
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PXA2XX=y
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=m
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ATA=m
-# CONFIG_SATA_PMP is not set
-CONFIG_PATA_PCMCIA=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_ASYNC=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_USBNET=m
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_NET_PCMCIA=y
-CONFIG_INPUT_MOUSEDEV=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_FUJITSU=m
-CONFIG_TOUCHSCREEN_ELO=m
-CONFIG_TOUCHSCREEN_MTOUCH=m
-CONFIG_TOUCHSCREEN_INEXIO=m
-CONFIG_TOUCHSCREEN_HTCPEN=m
-CONFIG_TOUCHSCREEN_PENMOUNT=m
-CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
-CONFIG_TOUCHSCREEN_TOUCHWIN=m
-CONFIG_TOUCHSCREEN_TOUCHIT213=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-# CONFIG_CONSOLE_TRANSLATIONS is not set
-# CONFIG_VT_CONSOLE is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=5
-CONFIG_SERIAL_8250_RUNTIME_UARTS=5
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-# CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_I2C_PXA=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_PXA=m
-CONFIG_FB_PXA_PARAMETERS=y
-CONFIG_BACKLIGHT_PWM=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PXA2XX_AC97=m
-CONFIG_USB=m
-CONFIG_USB_ISP116X_HCD=m
-CONFIG_USB_SL811_HCD=m
-CONFIG_USB_R8A66597_HCD=m
-CONFIG_USB_ACM=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_G_PRINTER=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1307=m
-CONFIG_RTC_DRV_SA1100=m
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_VFAT_FS=m
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_CRC_T10DIF=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_FTRACE is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_ARC4=m
diff --git a/arch/arm/configs/xcep_defconfig b/arch/arm/configs/xcep_defconfig
deleted file mode 100644
index 6bd9f71b71fc..000000000000
--- a/arch/arm/configs/xcep_defconfig
+++ /dev/null
@@ -1,90 +0,0 @@
-CONFIG_LOCALVERSION=".xcep-itech"
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_UID16 is not set
-# CONFIG_SHMEM is not set
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_XCEP=y
-CONFIG_IWMMXT=y
-CONFIG_AEABI=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="root=mtd4 rootfstype=jffs2 ro console=ttyS0,115200"
-CONFIG_FPE_NWFPE=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLOCK is not set
-CONFIG_SLUB=y
-CONFIG_SLUB_TINY=y
-# CONFIG_COMPAT_BRK is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=m
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PXA2XX=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_PXA=m
-CONFIG_HWMON=m
-CONFIG_SENSORS_ADM1021=m
-CONFIG_SENSORS_MAX6650=m
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_SA1100=m
-CONFIG_DMADEVICES=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_WBUF_VERIFY=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_UTF8=m
-# CONFIG_CRYPTO_HW is not set
-CONFIG_LIBCRC32C=m
-CONFIG_PRINTK_TIME=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_FTRACE is not set
-# CONFIG_ARM_UNWIND is not set
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig
deleted file mode 100644
index c4535315e216..000000000000
--- a/arch/arm/configs/zeus_defconfig
+++ /dev/null
@@ -1,173 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_TINY_RCU=y
-CONFIG_LOG_BUF_SHIFT=13
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_ARCOM_ZEUS=y
-CONFIG_AEABI=y
-CONFIG_UNUSED_BOARD_FILES=y
-CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200"
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_APM_EMULATION=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_IPV6 is not set
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_CFG80211=m
-CONFIG_LIB80211=m
-CONFIG_MAC80211=m
-CONFIG_PCCARD=m
-CONFIG_PCMCIA_PXA2XX=m
-CONFIG_MTD=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PXA2XX=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_EEPROM_AT24=m
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=m
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ATA=m
-# CONFIG_SATA_PMP is not set
-CONFIG_PATA_PCMCIA=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_DM9000=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_ASYNC=m
-CONFIG_HERMES=m
-CONFIG_PCMCIA_HERMES=m
-CONFIG_RT2X00=m
-CONFIG_RT73USB=m
-CONFIG_NET_PCMCIA=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_FUJITSU=m
-CONFIG_TOUCHSCREEN_ELO=m
-CONFIG_TOUCHSCREEN_MTOUCH=m
-CONFIG_TOUCHSCREEN_INEXIO=m
-CONFIG_TOUCHSCREEN_HTCPEN=m
-CONFIG_TOUCHSCREEN_PENMOUNT=m
-CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
-CONFIG_TOUCHSCREEN_TOUCHWIN=m
-CONFIG_TOUCHSCREEN_TOUCHIT213=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=7
-CONFIG_SERIAL_8250_RUNTIME_UARTS=7
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-# CONFIG_I2C_HELPER_AUTO is not set
-CONFIG_I2C_GPIO=y
-CONFIG_I2C_PXA=y
-CONFIG_SPI=y
-CONFIG_SPI_PXA2XX=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_SENSORS_LM75=m
-CONFIG_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_PXA=m
-CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_PXA2XX_AC97=m
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_PCMCIA is not set
-CONFIG_SND_SOC=m
-CONFIG_SND_PXA2XX_SOC=m
-CONFIG_USB=m
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_ACM=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_PXA27X=y
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_G_PRINTER=m
-CONFIG_MMC=y
-CONFIG_MMC_PXA=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_LEDS_TRIGGER_BACKLIGHT=m
-CONFIG_LEDS_TRIGGER_GPIO=m
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_ISL1208=m
-CONFIG_RTC_DRV_PXA=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_CRC_T10DIF=m
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/include/debug/s3c24xx.S b/arch/arm/include/debug/s3c24xx.S
index af873b526677..7ab5e577cd42 100644
--- a/arch/arm/include/debug/s3c24xx.S
+++ b/arch/arm/include/debug/s3c24xx.S
@@ -28,16 +28,6 @@
 		and	\rd, \rd, #S3C2410_UFSTAT_TXMASK
 	.endm
 
-/* Select the correct implementation depending on the configuration. The
- * S3C2440 will get selected by default, as these are the most widely
- * used variants of these
-*/
-
-#if defined(CONFIG_DEBUG_S3C2410_UART)
-#define fifo_full  fifo_full_s3c2410
-#define fifo_level fifo_level_s3c2410
-#endif
-
 /* include the reset of the code which will do the work */
 
 #include <debug/samsung.S>
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 405a607b754f..03d4c5578c5c 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -16,15 +16,6 @@
 
 	.equ	NR_syscalls, __NR_syscalls
 
-	.macro  arch_ret_to_user, tmp
-#ifdef CONFIG_ARCH_IOP32X
-	mrc	p15, 0, \tmp, c15, c1, 0
-	tst	\tmp, #(1 << 6)
-	bicne	\tmp, \tmp, #(1 << 6)
-	mcrne	p15, 0, \tmp, c15, c1, 0	@ Disable cp6 access
-#endif
-	.endm
-
 #include "entry-header.S"
 
 saved_psr	.req	r8
@@ -55,10 +46,6 @@ __ret_fast_syscall:
 	movs	r1, r1, lsl #16
 	bne	fast_work_pending
 
-
-	/* perform architecture specific actions before user return */
-	arch_ret_to_user r1
-
 	restore_user_regs fast = 1, offset = S_OFF
  UNWIND(.fnend		)
 ENDPROC(ret_fast_syscall)
@@ -129,8 +116,6 @@ ENTRY(ret_to_user_from_irq)
 no_work_pending:
 	asm_trace_hardirqs_on save = 0
 
-	/* perform architecture specific actions before user return */
-	arch_ret_to_user r1
 	ct_user_enter save = 0
 
 	restore_user_regs fast = 0, offset = 0
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 29e2900178a1..656991055bc1 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -344,7 +344,7 @@ __create_page_tables:
 	ldr	r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
 #endif
 
-#if defined(CONFIG_ARCH_NETWINDER) || defined(CONFIG_ARCH_CATS)
+#if defined(CONFIG_ARCH_NETWINDER)
 	/*
 	 * If we're using the NetWinder or CATS, we also need to map
 	 * in the 16550-type serial port for the debug messages
diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig
deleted file mode 100644
index 1f85deff2486..000000000000
--- a/arch/arm/mach-cns3xxx/Kconfig
+++ /dev/null
@@ -1,21 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-menuconfig ARCH_CNS3XXX
-	bool "Cavium Networks CNS3XXX family"
-	depends on ARCH_MULTI_V6
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select ARM_GIC
-	help
-	  Support for Cavium Networks CNS3XXX platform.
-
-if ARCH_CNS3XXX
-
-config MACH_CNS3420VB
-	bool "Support for CNS3420 Validation Board"
-	depends on ATAGS
-	help
-	  Include support for the Cavium Networks CNS3420 MPCore Platform
-	  Baseboard.
-	  This is a platform with an on-board ARM11 MPCore and has support
-	  for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, etc.
-
-endif
diff --git a/arch/arm/mach-cns3xxx/Makefile b/arch/arm/mach-cns3xxx/Makefile
deleted file mode 100644
index 52ca6ed62304..000000000000
--- a/arch/arm/mach-cns3xxx/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_ARCH_CNS3XXX)		+= cns3xxx.o
-cns3xxx-y				+= core.o pm.o
-cns3xxx-$(CONFIG_ATAGS)			+= devices.o
-cns3xxx-$(CONFIG_PCI)			+= pcie.o
-cns3xxx-$(CONFIG_MACH_CNS3420VB)	+= cns3420vb.o
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
deleted file mode 100644
index 9099560aa462..000000000000
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ /dev/null
@@ -1,252 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Cavium Networks CNS3420 Validation Board
- *
- * Copyright 2000 Deep Blue Solutions Ltd
- * Copyright 2008 ARM Limited
- * Copyright 2008 Cavium Networks
- *		  Scott Shu
- * Copyright 2010 MontaVista Software, LLC.
- *		  Anton Vorontsov <avorontsov@mvista.com>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/compiler.h>
-#include <linux/io.h>
-#include <linux/dma-mapping.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-#include <linux/usb/ehci_pdriver.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include "cns3xxx.h"
-#include "pm.h"
-#include "core.h"
-#include "devices.h"
-
-/*
- * NOR Flash
- */
-static struct mtd_partition cns3420_nor_partitions[] = {
-	{
-		.name		= "uboot",
-		.size		= 0x00040000,
-		.offset		= 0,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "kernel",
-		.size		= 0x004C0000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "filesystem",
-		.size		= 0x7000000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "filesystem2",
-		.size		= 0x0AE0000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "ubootenv",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,
-	},
-};
-
-static struct physmap_flash_data cns3420_nor_pdata = {
-	.width = 2,
-	.parts = cns3420_nor_partitions,
-	.nr_parts = ARRAY_SIZE(cns3420_nor_partitions),
-};
-
-static struct resource cns3420_nor_res = {
-	.start = CNS3XXX_FLASH_BASE,
-	.end = CNS3XXX_FLASH_BASE + SZ_128M - 1,
-	.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
-};
-
-static struct platform_device cns3420_nor_pdev = {
-	.name = "physmap-flash",
-	.id = 0,
-	.resource = &cns3420_nor_res,
-	.num_resources = 1,
-	.dev = {
-		.platform_data = &cns3420_nor_pdata,
-	},
-};
-
-/*
- * UART
- */
-static void __init cns3420_early_serial_setup(void)
-{
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	static struct uart_port cns3420_serial_port = {
-		.membase        = (void __iomem *)CNS3XXX_UART0_BASE_VIRT,
-		.mapbase        = CNS3XXX_UART0_BASE,
-		.irq            = IRQ_CNS3XXX_UART0,
-		.iotype         = UPIO_MEM,
-		.flags          = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
-		.regshift       = 2,
-		.uartclk        = 24000000,
-		.line           = 0,
-		.type           = PORT_16550A,
-		.fifosize       = 16,
-	};
-
-	early_serial_setup(&cns3420_serial_port);
-#endif
-}
-
-/*
- * USB
- */
-static struct resource cns3xxx_usb_ehci_resources[] = {
-	[0] = {
-		.start = CNS3XXX_USB_BASE,
-		.end   = CNS3XXX_USB_BASE + SZ_16M - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_CNS3XXX_USB_EHCI,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static u64 cns3xxx_usb_ehci_dma_mask = DMA_BIT_MASK(32);
-
-static int csn3xxx_usb_power_on(struct platform_device *pdev)
-{
-	/*
-	 * EHCI and OHCI share the same clock and power,
-	 * resetting twice would cause the 1st controller been reset.
-	 * Therefore only do power up  at the first up device, and
-	 * power down at the last down device.
-	 *
-	 * Set USB AHB INCR length to 16
-	 */
-	if (atomic_inc_return(&usb_pwr_ref) == 1) {
-		cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
-		cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
-		cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST);
-		__raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)),
-			MISC_CHIP_CONFIG_REG);
-	}
-
-	return 0;
-}
-
-static void csn3xxx_usb_power_off(struct platform_device *pdev)
-{
-	/*
-	 * EHCI and OHCI share the same clock and power,
-	 * resetting twice would cause the 1st controller been reset.
-	 * Therefore only do power up  at the first up device, and
-	 * power down at the last down device.
-	 */
-	if (atomic_dec_return(&usb_pwr_ref) == 0)
-		cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
-}
-
-static struct usb_ehci_pdata cns3xxx_usb_ehci_pdata = {
-	.power_on	= csn3xxx_usb_power_on,
-	.power_off	= csn3xxx_usb_power_off,
-};
-
-static struct platform_device cns3xxx_usb_ehci_device = {
-	.name          = "ehci-platform",
-	.num_resources = ARRAY_SIZE(cns3xxx_usb_ehci_resources),
-	.resource      = cns3xxx_usb_ehci_resources,
-	.dev           = {
-		.dma_mask          = &cns3xxx_usb_ehci_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data     = &cns3xxx_usb_ehci_pdata,
-	},
-};
-
-static struct resource cns3xxx_usb_ohci_resources[] = {
-	[0] = {
-		.start = CNS3XXX_USB_OHCI_BASE,
-		.end   = CNS3XXX_USB_OHCI_BASE + SZ_16M - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_CNS3XXX_USB_OHCI,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static u64 cns3xxx_usb_ohci_dma_mask = DMA_BIT_MASK(32);
-
-static struct usb_ohci_pdata cns3xxx_usb_ohci_pdata = {
-	.num_ports	= 1,
-	.power_on	= csn3xxx_usb_power_on,
-	.power_off	= csn3xxx_usb_power_off,
-};
-
-static struct platform_device cns3xxx_usb_ohci_device = {
-	.name          = "ohci-platform",
-	.num_resources = ARRAY_SIZE(cns3xxx_usb_ohci_resources),
-	.resource      = cns3xxx_usb_ohci_resources,
-	.dev           = {
-		.dma_mask          = &cns3xxx_usb_ohci_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data	   = &cns3xxx_usb_ohci_pdata,
-	},
-};
-
-/*
- * Initialization
- */
-static struct platform_device *cns3420_pdevs[] __initdata = {
-	&cns3420_nor_pdev,
-	&cns3xxx_usb_ehci_device,
-	&cns3xxx_usb_ohci_device,
-};
-
-static void __init cns3420_init(void)
-{
-	cns3xxx_l2x0_init();
-
-	platform_add_devices(cns3420_pdevs, ARRAY_SIZE(cns3420_pdevs));
-
-	cns3xxx_ahci_init();
-	cns3xxx_sdhci_init();
-
-	pm_power_off = cns3xxx_power_off;
-}
-
-static struct map_desc cns3420_io_desc[] __initdata = {
-	{
-		.virtual	= CNS3XXX_UART0_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static void __init cns3420_map_io(void)
-{
-	cns3xxx_map_io();
-	iotable_init(cns3420_io_desc, ARRAY_SIZE(cns3420_io_desc));
-
-	cns3420_early_serial_setup();
-}
-
-MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
-	.atag_offset	= 0x100,
-	.map_io		= cns3420_map_io,
-	.init_irq	= cns3xxx_init_irq,
-	.init_time	= cns3xxx_timer_init,
-	.init_machine	= cns3420_init,
-	.init_late      = cns3xxx_pcie_init_late,
-	.restart	= cns3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-cns3xxx/cns3xxx.h b/arch/arm/mach-cns3xxx/cns3xxx.h
deleted file mode 100644
index cbb105a74f90..000000000000
--- a/arch/arm/mach-cns3xxx/cns3xxx.h
+++ /dev/null
@@ -1,593 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2008 Cavium Networks
- */
-
-#ifndef __MACH_BOARD_CNS3XXXH
-#define __MACH_BOARD_CNS3XXXH
-
-/*
- * Memory map
- */
-#define CNS3XXX_FLASH_BASE			0x10000000	/* Flash/SRAM Memory Bank 0 */
-#define CNS3XXX_FLASH_SIZE			SZ_256M
-
-#define CNS3XXX_DDR2SDRAM_BASE			0x20000000	/* DDR2 SDRAM Memory */
-
-#define CNS3XXX_SPI_FLASH_BASE			0x60000000	/* SPI Serial Flash Memory */
-
-#define CNS3XXX_SWITCH_BASE			0x70000000	/* Switch and HNAT Control */
-
-#define CNS3XXX_PPE_BASE			0x70001000	/* HANT	*/
-
-#define CNS3XXX_EMBEDDED_SRAM_BASE		0x70002000	/* HANT Embedded SRAM */
-
-#define CNS3XXX_SSP_BASE			0x71000000	/* Synchronous Serial Port - SPI/PCM/I2C */
-
-#define CNS3XXX_DMC_BASE			0x72000000	/* DMC Control (DDR2 SDRAM) */
-
-#define CNS3XXX_SMC_BASE			0x73000000	/* SMC Control */
-
-#define SMC_MEMC_STATUS_OFFSET			0x000
-#define SMC_MEMIF_CFG_OFFSET			0x004
-#define SMC_MEMC_CFG_SET_OFFSET			0x008
-#define SMC_MEMC_CFG_CLR_OFFSET			0x00C
-#define SMC_DIRECT_CMD_OFFSET			0x010
-#define SMC_SET_CYCLES_OFFSET			0x014
-#define SMC_SET_OPMODE_OFFSET			0x018
-#define SMC_REFRESH_PERIOD_0_OFFSET		0x020
-#define SMC_REFRESH_PERIOD_1_OFFSET		0x024
-#define SMC_SRAM_CYCLES0_0_OFFSET		0x100
-#define SMC_NAND_CYCLES0_0_OFFSET		0x100
-#define SMC_OPMODE0_0_OFFSET			0x104
-#define SMC_SRAM_CYCLES0_1_OFFSET		0x120
-#define SMC_NAND_CYCLES0_1_OFFSET		0x120
-#define SMC_OPMODE0_1_OFFSET			0x124
-#define SMC_USER_STATUS_OFFSET			0x200
-#define SMC_USER_CONFIG_OFFSET			0x204
-#define SMC_ECC_STATUS_OFFSET			0x300
-#define SMC_ECC_MEMCFG_OFFSET			0x304
-#define SMC_ECC_MEMCOMMAND1_OFFSET		0x308
-#define SMC_ECC_MEMCOMMAND2_OFFSET		0x30C
-#define SMC_ECC_ADDR0_OFFSET			0x310
-#define SMC_ECC_ADDR1_OFFSET			0x314
-#define SMC_ECC_VALUE0_OFFSET			0x318
-#define SMC_ECC_VALUE1_OFFSET			0x31C
-#define SMC_ECC_VALUE2_OFFSET			0x320
-#define SMC_ECC_VALUE3_OFFSET			0x324
-#define SMC_PERIPH_ID_0_OFFSET			0xFE0
-#define SMC_PERIPH_ID_1_OFFSET			0xFE4
-#define SMC_PERIPH_ID_2_OFFSET			0xFE8
-#define SMC_PERIPH_ID_3_OFFSET			0xFEC
-#define SMC_PCELL_ID_0_OFFSET			0xFF0
-#define SMC_PCELL_ID_1_OFFSET			0xFF4
-#define SMC_PCELL_ID_2_OFFSET			0xFF8
-#define SMC_PCELL_ID_3_OFFSET			0xFFC
-
-#define CNS3XXX_GPIOA_BASE			0x74000000	/* GPIO port A */
-
-#define CNS3XXX_GPIOB_BASE			0x74800000	/* GPIO port B */
-
-#define CNS3XXX_RTC_BASE			0x75000000	/* Real Time Clock */
-
-#define RTC_SEC_OFFSET				0x00
-#define RTC_MIN_OFFSET				0x04
-#define RTC_HOUR_OFFSET				0x08
-#define RTC_DAY_OFFSET				0x0C
-#define RTC_SEC_ALM_OFFSET			0x10
-#define RTC_MIN_ALM_OFFSET			0x14
-#define RTC_HOUR_ALM_OFFSET			0x18
-#define RTC_REC_OFFSET				0x1C
-#define RTC_CTRL_OFFSET				0x20
-#define RTC_INTR_STS_OFFSET			0x34
-
-#define CNS3XXX_MISC_BASE			0x76000000	/* Misc Control */
-#define CNS3XXX_MISC_BASE_VIRT			0xFB000000	/* Misc Control */
-
-#define CNS3XXX_PM_BASE				0x77000000	/* Power Management Control */
-#define CNS3XXX_PM_BASE_VIRT			0xFB001000
-
-#define PM_CLK_GATE_OFFSET			0x00
-#define PM_SOFT_RST_OFFSET			0x04
-#define PM_HS_CFG_OFFSET			0x08
-#define PM_CACTIVE_STA_OFFSET			0x0C
-#define PM_PWR_STA_OFFSET			0x10
-#define PM_SYS_CLK_CTRL_OFFSET			0x14
-#define PM_PLL_LCD_I2S_CTRL_OFFSET		0x18
-#define PM_PLL_HM_PD_OFFSET			0x1C
-
-#define CNS3XXX_UART0_BASE			0x78000000	/* UART 0 */
-#define CNS3XXX_UART0_BASE_VIRT			0xFB002000
-
-#define CNS3XXX_UART1_BASE			0x78400000	/* UART 1 */
-
-#define CNS3XXX_UART2_BASE			0x78800000	/* UART 2 */
-
-#define CNS3XXX_DMAC_BASE			0x79000000	/* Generic DMA Control */
-
-#define CNS3XXX_CORESIGHT_BASE			0x7A000000	/* CoreSight */
-
-#define CNS3XXX_CRYPTO_BASE			0x7B000000	/* Crypto */
-
-#define CNS3XXX_I2S_BASE			0x7C000000	/* I2S */
-
-#define CNS3XXX_TIMER1_2_3_BASE			0x7C800000	/* Timer */
-#define CNS3XXX_TIMER1_2_3_BASE_VIRT		0xFB003000
-
-#define TIMER1_COUNTER_OFFSET			0x00
-#define TIMER1_AUTO_RELOAD_OFFSET		0x04
-#define TIMER1_MATCH_V1_OFFSET			0x08
-#define TIMER1_MATCH_V2_OFFSET			0x0C
-
-#define TIMER2_COUNTER_OFFSET			0x10
-#define TIMER2_AUTO_RELOAD_OFFSET		0x14
-#define TIMER2_MATCH_V1_OFFSET			0x18
-#define TIMER2_MATCH_V2_OFFSET			0x1C
-
-#define TIMER1_2_CONTROL_OFFSET			0x30
-#define TIMER1_2_INTERRUPT_STATUS_OFFSET	0x34
-#define TIMER1_2_INTERRUPT_MASK_OFFSET		0x38
-
-#define TIMER_FREERUN_OFFSET			0x40
-#define TIMER_FREERUN_CONTROL_OFFSET		0x44
-
-#define CNS3XXX_HCIE_BASE			0x7D000000	/* HCIE Control */
-
-#define CNS3XXX_RAID_BASE			0x7E000000	/* RAID Control */
-
-#define CNS3XXX_AXI_IXC_BASE			0x7F000000	/* AXI IXC */
-
-#define CNS3XXX_CLCD_BASE			0x80000000	/* LCD Control */
-
-#define CNS3XXX_USBOTG_BASE			0x81000000	/* USB OTG Control */
-
-#define CNS3XXX_USB_BASE			0x82000000	/* USB Host Control */
-
-#define CNS3XXX_SATA2_BASE			0x83000000	/* SATA */
-#define CNS3XXX_SATA2_SIZE			SZ_16M
-
-#define CNS3XXX_CAMERA_BASE			0x84000000	/* Camera Interface */
-
-#define CNS3XXX_SDIO_BASE			0x85000000	/* SDIO */
-
-#define CNS3XXX_I2S_TDM_BASE			0x86000000	/* I2S TDM */
-
-#define CNS3XXX_2DG_BASE			0x87000000	/* 2D Graphic Control */
-
-#define CNS3XXX_USB_OHCI_BASE			0x88000000	/* USB OHCI */
-
-#define CNS3XXX_L2C_BASE			0x92000000	/* L2 Cache Control */
-
-#define CNS3XXX_PCIE0_MEM_BASE			0xA0000000	/* PCIe Port 0 IO/Memory Space */
-
-#define CNS3XXX_PCIE0_HOST_BASE			0xAB000000	/* PCIe Port 0 RC Base */
-#define CNS3XXX_PCIE0_HOST_BASE_VIRT		0xE1000000
-
-#define CNS3XXX_PCIE0_IO_BASE			0xAC000000	/* PCIe Port 0 */
-
-#define CNS3XXX_PCIE0_CFG0_BASE			0xAD000000	/* PCIe Port 0 CFG Type 0 */
-#define CNS3XXX_PCIE0_CFG0_BASE_VIRT		0xE3000000
-
-#define CNS3XXX_PCIE0_CFG1_BASE			0xAE000000	/* PCIe Port 0 CFG Type 1 */
-#define CNS3XXX_PCIE0_CFG1_BASE_VIRT		0xE4000000
-
-#define CNS3XXX_PCIE0_MSG_BASE			0xAF000000	/* PCIe Port 0 Message Space */
-
-#define CNS3XXX_PCIE1_MEM_BASE			0xB0000000	/* PCIe Port 1 IO/Memory Space */
-
-#define CNS3XXX_PCIE1_HOST_BASE			0xBB000000	/* PCIe Port 1 RC Base */
-#define CNS3XXX_PCIE1_HOST_BASE_VIRT		0xE9000000
-
-#define CNS3XXX_PCIE1_IO_BASE			0xBC000000	/* PCIe Port 1 */
-
-#define CNS3XXX_PCIE1_CFG0_BASE			0xBD000000	/* PCIe Port 1 CFG Type 0 */
-#define CNS3XXX_PCIE1_CFG0_BASE_VIRT		0xEB000000
-
-#define CNS3XXX_PCIE1_CFG1_BASE			0xBE000000	/* PCIe Port 1 CFG Type 1 */
-#define CNS3XXX_PCIE1_CFG1_BASE_VIRT		0xEC000000
-
-#define CNS3XXX_PCIE1_MSG_BASE			0xBF000000	/* PCIe Port 1 Message Space */
-
-/*
- * Testchip peripheral and fpga gic regions
- */
-#define CNS3XXX_TC11MP_SCU_BASE			0x90000000	/* IRQ, Test chip */
-#define CNS3XXX_TC11MP_SCU_BASE_VIRT		0xFB004000
-
-#define CNS3XXX_TC11MP_GIC_CPU_BASE		0x90000100	/* Test chip interrupt controller CPU interface */
-#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT	(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x100)
-
-#define CNS3XXX_TC11MP_TWD_BASE			0x90000600
-#define CNS3XXX_TC11MP_TWD_BASE_VIRT		(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x600)
-
-#define CNS3XXX_TC11MP_GIC_DIST_BASE		0x90001000	/* Test chip interrupt controller distributor */
-#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT	(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x1000)
-
-#define CNS3XXX_TC11MP_L220_BASE		0x92002000	/* L220 registers */
-
-/*
- * Misc block
- */
-#define MISC_MEM_MAP(offs) (void __iomem *)(CNS3XXX_MISC_BASE_VIRT + (offs))
-
-#define MISC_MEMORY_REMAP_REG			MISC_MEM_MAP(0x00)
-#define MISC_CHIP_CONFIG_REG			MISC_MEM_MAP(0x04)
-#define MISC_DEBUG_PROBE_DATA_REG		MISC_MEM_MAP(0x08)
-#define MISC_DEBUG_PROBE_SELECTION_REG		MISC_MEM_MAP(0x0C)
-#define MISC_IO_PIN_FUNC_SELECTION_REG		MISC_MEM_MAP(0x10)
-#define MISC_GPIOA_PIN_ENABLE_REG		MISC_MEM_MAP(0x14)
-#define MISC_GPIOB_PIN_ENABLE_REG		MISC_MEM_MAP(0x18)
-#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_A	MISC_MEM_MAP(0x1C)
-#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_B	MISC_MEM_MAP(0x20)
-#define MISC_GPIOA_15_0_PULL_CTRL_REG		MISC_MEM_MAP(0x24)
-#define MISC_GPIOA_16_31_PULL_CTRL_REG		MISC_MEM_MAP(0x28)
-#define MISC_GPIOB_15_0_PULL_CTRL_REG		MISC_MEM_MAP(0x2C)
-#define MISC_GPIOB_16_31_PULL_CTRL_REG		MISC_MEM_MAP(0x30)
-#define MISC_IO_PULL_CTRL_REG			MISC_MEM_MAP(0x34)
-#define MISC_E_FUSE_31_0_REG			MISC_MEM_MAP(0x40)
-#define MISC_E_FUSE_63_32_REG			MISC_MEM_MAP(0x44)
-#define MISC_E_FUSE_95_64_REG			MISC_MEM_MAP(0x48)
-#define MISC_E_FUSE_127_96_REG			MISC_MEM_MAP(0x4C)
-#define MISC_SOFTWARE_TEST_1_REG		MISC_MEM_MAP(0x50)
-#define MISC_SOFTWARE_TEST_2_REG		MISC_MEM_MAP(0x54)
-
-#define MISC_SATA_POWER_MODE			MISC_MEM_MAP(0x310)
-
-#define MISC_USB_CFG_REG			MISC_MEM_MAP(0x800)
-#define MISC_USB_STS_REG			MISC_MEM_MAP(0x804)
-#define MISC_USBPHY00_CFG_REG			MISC_MEM_MAP(0x808)
-#define MISC_USBPHY01_CFG_REG			MISC_MEM_MAP(0x80c)
-#define MISC_USBPHY10_CFG_REG			MISC_MEM_MAP(0x810)
-#define MISC_USBPHY11_CFG_REG			MISC_MEM_MAP(0x814)
-
-#define MISC_PCIEPHY_CMCTL(x)			MISC_MEM_MAP(0x900 + (x) * 0x004)
-#define MISC_PCIEPHY_CTL(x)			MISC_MEM_MAP(0x940 + (x) * 0x100)
-#define MISC_PCIE_AXIS_AWMISC(x)		MISC_MEM_MAP(0x944 + (x) * 0x100)
-#define MISC_PCIE_AXIS_ARMISC(x)		MISC_MEM_MAP(0x948 + (x) * 0x100)
-#define MISC_PCIE_AXIS_RMISC(x)			MISC_MEM_MAP(0x94C + (x) * 0x100)
-#define MISC_PCIE_AXIS_BMISC(x)			MISC_MEM_MAP(0x950 + (x) * 0x100)
-#define MISC_PCIE_AXIM_RMISC(x)			MISC_MEM_MAP(0x954 + (x) * 0x100)
-#define MISC_PCIE_AXIM_BMISC(x)			MISC_MEM_MAP(0x958 + (x) * 0x100)
-#define MISC_PCIE_CTRL(x)			MISC_MEM_MAP(0x95C + (x) * 0x100)
-#define MISC_PCIE_PM_DEBUG(x)			MISC_MEM_MAP(0x960 + (x) * 0x100)
-#define MISC_PCIE_RFC_DEBUG(x)			MISC_MEM_MAP(0x964 + (x) * 0x100)
-#define MISC_PCIE_CXPL_DEBUGL(x)		MISC_MEM_MAP(0x968 + (x) * 0x100)
-#define MISC_PCIE_CXPL_DEBUGH(x)		MISC_MEM_MAP(0x96C + (x) * 0x100)
-#define MISC_PCIE_DIAG_DEBUGH(x)		MISC_MEM_MAP(0x970 + (x) * 0x100)
-#define MISC_PCIE_W1CLR(x)			MISC_MEM_MAP(0x974 + (x) * 0x100)
-#define MISC_PCIE_INT_MASK(x)			MISC_MEM_MAP(0x978 + (x) * 0x100)
-#define MISC_PCIE_INT_STATUS(x)			MISC_MEM_MAP(0x97C + (x) * 0x100)
-
-/*
- * Power management and clock control
- */
-#define PMU_MEM_MAP(offs) (void __iomem *)(CNS3XXX_PM_BASE_VIRT + (offs))
-
-#define PM_CLK_GATE_REG					PMU_MEM_MAP(0x000)
-#define PM_SOFT_RST_REG					PMU_MEM_MAP(0x004)
-#define PM_HS_CFG_REG					PMU_MEM_MAP(0x008)
-#define PM_CACTIVE_STA_REG				PMU_MEM_MAP(0x00C)
-#define PM_PWR_STA_REG					PMU_MEM_MAP(0x010)
-#define PM_CLK_CTRL_REG					PMU_MEM_MAP(0x014)
-#define PM_PLL_LCD_I2S_CTRL_REG				PMU_MEM_MAP(0x018)
-#define PM_PLL_HM_PD_CTRL_REG				PMU_MEM_MAP(0x01C)
-#define PM_REGULAT_CTRL_REG				PMU_MEM_MAP(0x020)
-#define PM_WDT_CTRL_REG					PMU_MEM_MAP(0x024)
-#define PM_WU_CTRL0_REG					PMU_MEM_MAP(0x028)
-#define PM_WU_CTRL1_REG					PMU_MEM_MAP(0x02C)
-#define PM_CSR_REG					PMU_MEM_MAP(0x030)
-
-/* PM_CLK_GATE_REG */
-#define PM_CLK_GATE_REG_OFFSET_SDIO			(25)
-#define PM_CLK_GATE_REG_OFFSET_GPU			(24)
-#define PM_CLK_GATE_REG_OFFSET_CIM			(23)
-#define PM_CLK_GATE_REG_OFFSET_LCDC			(22)
-#define PM_CLK_GATE_REG_OFFSET_I2S			(21)
-#define PM_CLK_GATE_REG_OFFSET_RAID			(20)
-#define PM_CLK_GATE_REG_OFFSET_SATA			(19)
-#define PM_CLK_GATE_REG_OFFSET_PCIE(x)			(17 + (x))
-#define PM_CLK_GATE_REG_OFFSET_USB_HOST			(16)
-#define PM_CLK_GATE_REG_OFFSET_USB_OTG			(15)
-#define PM_CLK_GATE_REG_OFFSET_TIMER			(14)
-#define PM_CLK_GATE_REG_OFFSET_CRYPTO			(13)
-#define PM_CLK_GATE_REG_OFFSET_HCIE			(12)
-#define PM_CLK_GATE_REG_OFFSET_SWITCH			(11)
-#define PM_CLK_GATE_REG_OFFSET_GPIO			(10)
-#define PM_CLK_GATE_REG_OFFSET_UART3			(9)
-#define PM_CLK_GATE_REG_OFFSET_UART2			(8)
-#define PM_CLK_GATE_REG_OFFSET_UART1			(7)
-#define PM_CLK_GATE_REG_OFFSET_RTC			(5)
-#define PM_CLK_GATE_REG_OFFSET_GDMA			(4)
-#define PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C		(3)
-#define PM_CLK_GATE_REG_OFFSET_SMC_NFI			(1)
-#define PM_CLK_GATE_REG_MASK				(0x03FFFFBA)
-
-/* PM_SOFT_RST_REG */
-#define PM_SOFT_RST_REG_OFFST_WARM_RST_FLAG		(31)
-#define PM_SOFT_RST_REG_OFFST_CPU1			(29)
-#define PM_SOFT_RST_REG_OFFST_CPU0			(28)
-#define PM_SOFT_RST_REG_OFFST_SDIO			(25)
-#define PM_SOFT_RST_REG_OFFST_GPU			(24)
-#define PM_SOFT_RST_REG_OFFST_CIM			(23)
-#define PM_SOFT_RST_REG_OFFST_LCDC			(22)
-#define PM_SOFT_RST_REG_OFFST_I2S			(21)
-#define PM_SOFT_RST_REG_OFFST_RAID			(20)
-#define PM_SOFT_RST_REG_OFFST_SATA			(19)
-#define PM_SOFT_RST_REG_OFFST_PCIE(x)			(17 + (x))
-#define PM_SOFT_RST_REG_OFFST_USB_HOST			(16)
-#define PM_SOFT_RST_REG_OFFST_USB_OTG			(15)
-#define PM_SOFT_RST_REG_OFFST_TIMER			(14)
-#define PM_SOFT_RST_REG_OFFST_CRYPTO			(13)
-#define PM_SOFT_RST_REG_OFFST_HCIE			(12)
-#define PM_SOFT_RST_REG_OFFST_SWITCH			(11)
-#define PM_SOFT_RST_REG_OFFST_GPIO			(10)
-#define PM_SOFT_RST_REG_OFFST_UART3			(9)
-#define PM_SOFT_RST_REG_OFFST_UART2			(8)
-#define PM_SOFT_RST_REG_OFFST_UART1			(7)
-#define PM_SOFT_RST_REG_OFFST_RTC			(5)
-#define PM_SOFT_RST_REG_OFFST_GDMA			(4)
-#define PM_SOFT_RST_REG_OFFST_SPI_PCM_I2C		(3)
-#define PM_SOFT_RST_REG_OFFST_DMC			(2)
-#define PM_SOFT_RST_REG_OFFST_SMC_NFI			(1)
-#define PM_SOFT_RST_REG_OFFST_GLOBAL			(0)
-#define PM_SOFT_RST_REG_MASK				(0xF3FFFFBF)
-
-/* PMHS_CFG_REG */
-#define PM_HS_CFG_REG_OFFSET_SDIO			(25)
-#define PM_HS_CFG_REG_OFFSET_GPU			(24)
-#define PM_HS_CFG_REG_OFFSET_CIM			(23)
-#define PM_HS_CFG_REG_OFFSET_LCDC			(22)
-#define PM_HS_CFG_REG_OFFSET_I2S			(21)
-#define PM_HS_CFG_REG_OFFSET_RAID			(20)
-#define PM_HS_CFG_REG_OFFSET_SATA			(19)
-#define PM_HS_CFG_REG_OFFSET_PCIE1			(18)
-#define PM_HS_CFG_REG_OFFSET_PCIE0			(17)
-#define PM_HS_CFG_REG_OFFSET_USB_HOST			(16)
-#define PM_HS_CFG_REG_OFFSET_USB_OTG			(15)
-#define PM_HS_CFG_REG_OFFSET_TIMER			(14)
-#define PM_HS_CFG_REG_OFFSET_CRYPTO			(13)
-#define PM_HS_CFG_REG_OFFSET_HCIE			(12)
-#define PM_HS_CFG_REG_OFFSET_SWITCH			(11)
-#define PM_HS_CFG_REG_OFFSET_GPIO			(10)
-#define PM_HS_CFG_REG_OFFSET_UART3			(9)
-#define PM_HS_CFG_REG_OFFSET_UART2			(8)
-#define PM_HS_CFG_REG_OFFSET_UART1			(7)
-#define PM_HS_CFG_REG_OFFSET_RTC			(5)
-#define PM_HS_CFG_REG_OFFSET_GDMA			(4)
-#define PM_HS_CFG_REG_OFFSET_SPI_PCM_I2S		(3)
-#define PM_HS_CFG_REG_OFFSET_DMC			(2)
-#define PM_HS_CFG_REG_OFFSET_SMC_NFI			(1)
-#define PM_HS_CFG_REG_MASK				(0x03FFFFBE)
-#define PM_HS_CFG_REG_MASK_SUPPORT			(0x01100806)
-
-/* PM_CACTIVE_STA_REG */
-#define PM_CACTIVE_STA_REG_OFFSET_SDIO			(25)
-#define PM_CACTIVE_STA_REG_OFFSET_GPU			(24)
-#define PM_CACTIVE_STA_REG_OFFSET_CIM			(23)
-#define PM_CACTIVE_STA_REG_OFFSET_LCDC			(22)
-#define PM_CACTIVE_STA_REG_OFFSET_I2S			(21)
-#define PM_CACTIVE_STA_REG_OFFSET_RAID			(20)
-#define PM_CACTIVE_STA_REG_OFFSET_SATA			(19)
-#define PM_CACTIVE_STA_REG_OFFSET_PCIE1			(18)
-#define PM_CACTIVE_STA_REG_OFFSET_PCIE0			(17)
-#define PM_CACTIVE_STA_REG_OFFSET_USB_HOST		(16)
-#define PM_CACTIVE_STA_REG_OFFSET_USB_OTG		(15)
-#define PM_CACTIVE_STA_REG_OFFSET_TIMER			(14)
-#define PM_CACTIVE_STA_REG_OFFSET_CRYPTO		(13)
-#define PM_CACTIVE_STA_REG_OFFSET_HCIE			(12)
-#define PM_CACTIVE_STA_REG_OFFSET_SWITCH		(11)
-#define PM_CACTIVE_STA_REG_OFFSET_GPIO			(10)
-#define PM_CACTIVE_STA_REG_OFFSET_UART3			(9)
-#define PM_CACTIVE_STA_REG_OFFSET_UART2			(8)
-#define PM_CACTIVE_STA_REG_OFFSET_UART1			(7)
-#define PM_CACTIVE_STA_REG_OFFSET_RTC			(5)
-#define PM_CACTIVE_STA_REG_OFFSET_GDMA			(4)
-#define PM_CACTIVE_STA_REG_OFFSET_SPI_PCM_I2S		(3)
-#define PM_CACTIVE_STA_REG_OFFSET_DMC			(2)
-#define PM_CACTIVE_STA_REG_OFFSET_SMC_NFI		(1)
-#define PM_CACTIVE_STA_REG_MASK				(0x03FFFFBE)
-
-/* PM_PWR_STA_REG */
-#define PM_PWR_STA_REG_REG_OFFSET_SDIO			(25)
-#define PM_PWR_STA_REG_REG_OFFSET_GPU			(24)
-#define PM_PWR_STA_REG_REG_OFFSET_CIM			(23)
-#define PM_PWR_STA_REG_REG_OFFSET_LCDC			(22)
-#define PM_PWR_STA_REG_REG_OFFSET_I2S			(21)
-#define PM_PWR_STA_REG_REG_OFFSET_RAID			(20)
-#define PM_PWR_STA_REG_REG_OFFSET_SATA			(19)
-#define PM_PWR_STA_REG_REG_OFFSET_PCIE1			(18)
-#define PM_PWR_STA_REG_REG_OFFSET_PCIE0			(17)
-#define PM_PWR_STA_REG_REG_OFFSET_USB_HOST		(16)
-#define PM_PWR_STA_REG_REG_OFFSET_USB_OTG		(15)
-#define PM_PWR_STA_REG_REG_OFFSET_TIMER			(14)
-#define PM_PWR_STA_REG_REG_OFFSET_CRYPTO		(13)
-#define PM_PWR_STA_REG_REG_OFFSET_HCIE			(12)
-#define PM_PWR_STA_REG_REG_OFFSET_SWITCH		(11)
-#define PM_PWR_STA_REG_REG_OFFSET_GPIO			(10)
-#define PM_PWR_STA_REG_REG_OFFSET_UART3			(9)
-#define PM_PWR_STA_REG_REG_OFFSET_UART2			(8)
-#define PM_PWR_STA_REG_REG_OFFSET_UART1			(7)
-#define PM_PWR_STA_REG_REG_OFFSET_RTC			(5)
-#define PM_PWR_STA_REG_REG_OFFSET_GDMA			(4)
-#define PM_PWR_STA_REG_REG_OFFSET_SPI_PCM_I2S		(3)
-#define PM_PWR_STA_REG_REG_OFFSET_DMC			(2)
-#define PM_PWR_STA_REG_REG_OFFSET_SMC_NFI		(1)
-#define PM_PWR_STA_REG_REG_MASK				(0x03FFFFBE)
-
-/* PM_CLK_CTRL_REG */
-#define PM_CLK_CTRL_REG_OFFSET_I2S_MCLK			(31)
-#define PM_CLK_CTRL_REG_OFFSET_DDR2_CHG_EN		(30)
-#define PM_CLK_CTRL_REG_OFFSET_PCIE_REF1_EN		(29)
-#define PM_CLK_CTRL_REG_OFFSET_PCIE_REF0_EN		(28)
-#define PM_CLK_CTRL_REG_OFFSET_TIMER_SIM_MODE		(27)
-#define PM_CLK_CTRL_REG_OFFSET_I2SCLK_DIV		(24)
-#define PM_CLK_CTRL_REG_OFFSET_I2SCLK_SEL		(22)
-#define PM_CLK_CTRL_REG_OFFSET_CLKOUT_DIV		(20)
-#define PM_CLK_CTRL_REG_OFFSET_CLKOUT_SEL		(16)
-#define PM_CLK_CTRL_REG_OFFSET_MDC_DIV			(14)
-#define PM_CLK_CTRL_REG_OFFSET_CRYPTO_CLK_SEL		(12)
-#define PM_CLK_CTRL_REG_OFFSET_CPU_PWR_MODE		(9)
-#define PM_CLK_CTRL_REG_OFFSET_PLL_DDR2_SEL		(7)
-#define PM_CLK_CTRL_REG_OFFSET_DIV_IMMEDIATE		(6)
-#define PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV		(4)
-#define PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL		(0)
-
-#define PM_CPU_CLK_DIV(DIV) { \
-	PM_CLK_CTRL_REG &= ~((0x3) << PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV); \
-	PM_CLK_CTRL_REG |= (((DIV)&0x3) << PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV); \
-}
-
-#define PM_PLL_CPU_SEL(CPU) { \
-	PM_CLK_CTRL_REG &= ~((0xF) << PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL); \
-	PM_CLK_CTRL_REG |= (((CPU)&0xF) << PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL); \
-}
-
-/* PM_PLL_LCD_I2S_CTRL_REG */
-#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_MCLK_SMC_DIV	(22)
-#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_R_SEL		(17)
-#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_P	(11)
-#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_M	(3)
-#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_S	(0)
-
-/* PM_PLL_HM_PD_CTRL_REG */
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1		(11)
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0		(10)
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_I2SCD		(6)
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_I2S		(5)
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_LCD		(4)
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB		(3)
-#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_RGMII		(2)
-#define PM_PLL_HM_PD_CTRL_REG_MASK			(0x00000C7C)
-
-/* PM_WDT_CTRL_REG */
-#define PM_WDT_CTRL_REG_OFFSET_RESET_CPU_ONLY		(0)
-
-/* PM_CSR_REG - Clock Scaling Register*/
-#define PM_CSR_REG_OFFSET_CSR_EN			(30)
-#define PM_CSR_REG_OFFSET_CSR_NUM			(0)
-
-#define CNS3XXX_PWR_CLK_EN(BLOCK) (0x1<<PM_CLK_GATE_REG_OFFSET_##BLOCK)
-
-/* Software reset*/
-#define CNS3XXX_PWR_SOFTWARE_RST(BLOCK) (0x1<<PM_SOFT_RST_REG_OFFST_##BLOCK)
-
-/*
- * CNS3XXX support several power saving mode as following,
- * DFS, IDLE, HALT, DOZE, SLEEP, Hibernate
- */
-#define CNS3XXX_PWR_CPU_MODE_DFS			(0)
-#define CNS3XXX_PWR_CPU_MODE_IDLE			(1)
-#define CNS3XXX_PWR_CPU_MODE_HALT			(2)
-#define CNS3XXX_PWR_CPU_MODE_DOZE			(3)
-#define CNS3XXX_PWR_CPU_MODE_SLEEP			(4)
-#define CNS3XXX_PWR_CPU_MODE_HIBERNATE			(5)
-
-#define CNS3XXX_PWR_PLL(BLOCK)	(0x1<<PM_PLL_HM_PD_CTRL_REG_OFFSET_##BLOCK)
-#define CNS3XXX_PWR_PLL_ALL	PM_PLL_HM_PD_CTRL_REG_MASK
-
-/* Change CPU frequency and divider */
-#define CNS3XXX_PWR_PLL_CPU_300MHZ			(0)
-#define CNS3XXX_PWR_PLL_CPU_333MHZ			(1)
-#define CNS3XXX_PWR_PLL_CPU_366MHZ			(2)
-#define CNS3XXX_PWR_PLL_CPU_400MHZ			(3)
-#define CNS3XXX_PWR_PLL_CPU_433MHZ			(4)
-#define CNS3XXX_PWR_PLL_CPU_466MHZ			(5)
-#define CNS3XXX_PWR_PLL_CPU_500MHZ			(6)
-#define CNS3XXX_PWR_PLL_CPU_533MHZ			(7)
-#define CNS3XXX_PWR_PLL_CPU_566MHZ			(8)
-#define CNS3XXX_PWR_PLL_CPU_600MHZ			(9)
-#define CNS3XXX_PWR_PLL_CPU_633MHZ			(10)
-#define CNS3XXX_PWR_PLL_CPU_666MHZ			(11)
-#define CNS3XXX_PWR_PLL_CPU_700MHZ			(12)
-
-#define CNS3XXX_PWR_CPU_CLK_DIV_BY1			(0)
-#define CNS3XXX_PWR_CPU_CLK_DIV_BY2			(1)
-#define CNS3XXX_PWR_CPU_CLK_DIV_BY4			(2)
-
-/* Change DDR2 frequency */
-#define CNS3XXX_PWR_PLL_DDR2_200MHZ			(0)
-#define CNS3XXX_PWR_PLL_DDR2_266MHZ			(1)
-#define CNS3XXX_PWR_PLL_DDR2_333MHZ			(2)
-#define CNS3XXX_PWR_PLL_DDR2_400MHZ			(3)
-
-void cns3xxx_pwr_soft_rst(unsigned int block);
-void cns3xxx_pwr_clk_en(unsigned int block);
-int cns3xxx_cpu_clock(void);
-
-/*
- * ARM11 MPCore interrupt sources (primary GIC)
- */
-#define IRQ_TC11MP_GIC_START	32
-
-#define IRQ_CNS3XXX_PMU			(IRQ_TC11MP_GIC_START + 0)
-#define IRQ_CNS3XXX_SDIO		(IRQ_TC11MP_GIC_START + 1)
-#define IRQ_CNS3XXX_L2CC		(IRQ_TC11MP_GIC_START + 2)
-#define IRQ_CNS3XXX_RTC			(IRQ_TC11MP_GIC_START + 3)
-#define IRQ_CNS3XXX_I2S			(IRQ_TC11MP_GIC_START + 4)
-#define IRQ_CNS3XXX_PCM			(IRQ_TC11MP_GIC_START + 5)
-#define IRQ_CNS3XXX_SPI			(IRQ_TC11MP_GIC_START + 6)
-#define IRQ_CNS3XXX_I2C			(IRQ_TC11MP_GIC_START + 7)
-#define IRQ_CNS3XXX_CIM			(IRQ_TC11MP_GIC_START + 8)
-#define IRQ_CNS3XXX_GPU			(IRQ_TC11MP_GIC_START + 9)
-#define IRQ_CNS3XXX_LCD			(IRQ_TC11MP_GIC_START + 10)
-#define IRQ_CNS3XXX_GPIOA		(IRQ_TC11MP_GIC_START + 11)
-#define IRQ_CNS3XXX_GPIOB		(IRQ_TC11MP_GIC_START + 12)
-#define IRQ_CNS3XXX_UART0		(IRQ_TC11MP_GIC_START + 13)
-#define IRQ_CNS3XXX_UART1		(IRQ_TC11MP_GIC_START + 14)
-#define IRQ_CNS3XXX_UART2		(IRQ_TC11MP_GIC_START + 15)
-#define IRQ_CNS3XXX_ARM11		(IRQ_TC11MP_GIC_START + 16)
-
-#define IRQ_CNS3XXX_SW_STATUS		(IRQ_TC11MP_GIC_START + 17)
-#define IRQ_CNS3XXX_SW_R0TXC		(IRQ_TC11MP_GIC_START + 18)
-#define IRQ_CNS3XXX_SW_R0RXC		(IRQ_TC11MP_GIC_START + 19)
-#define IRQ_CNS3XXX_SW_R0QE		(IRQ_TC11MP_GIC_START + 20)
-#define IRQ_CNS3XXX_SW_R0QF		(IRQ_TC11MP_GIC_START + 21)
-#define IRQ_CNS3XXX_SW_R1TXC		(IRQ_TC11MP_GIC_START + 22)
-#define IRQ_CNS3XXX_SW_R1RXC		(IRQ_TC11MP_GIC_START + 23)
-#define IRQ_CNS3XXX_SW_R1QE		(IRQ_TC11MP_GIC_START + 24)
-#define IRQ_CNS3XXX_SW_R1QF		(IRQ_TC11MP_GIC_START + 25)
-#define IRQ_CNS3XXX_SW_PPE		(IRQ_TC11MP_GIC_START + 26)
-
-#define IRQ_CNS3XXX_CRYPTO		(IRQ_TC11MP_GIC_START + 27)
-#define IRQ_CNS3XXX_HCIE		(IRQ_TC11MP_GIC_START + 28)
-#define IRQ_CNS3XXX_PCIE0_DEVICE	(IRQ_TC11MP_GIC_START + 29)
-#define IRQ_CNS3XXX_PCIE1_DEVICE	(IRQ_TC11MP_GIC_START + 30)
-#define IRQ_CNS3XXX_USB_OTG		(IRQ_TC11MP_GIC_START + 31)
-#define IRQ_CNS3XXX_USB_EHCI		(IRQ_TC11MP_GIC_START + 32)
-#define IRQ_CNS3XXX_SATA		(IRQ_TC11MP_GIC_START + 33)
-#define IRQ_CNS3XXX_RAID		(IRQ_TC11MP_GIC_START + 34)
-#define IRQ_CNS3XXX_SMC			(IRQ_TC11MP_GIC_START + 35)
-
-#define IRQ_CNS3XXX_DMAC_ABORT		(IRQ_TC11MP_GIC_START + 36)
-#define IRQ_CNS3XXX_DMAC0		(IRQ_TC11MP_GIC_START + 37)
-#define IRQ_CNS3XXX_DMAC1		(IRQ_TC11MP_GIC_START + 38)
-#define IRQ_CNS3XXX_DMAC2		(IRQ_TC11MP_GIC_START + 39)
-#define IRQ_CNS3XXX_DMAC3		(IRQ_TC11MP_GIC_START + 40)
-#define IRQ_CNS3XXX_DMAC4		(IRQ_TC11MP_GIC_START + 41)
-#define IRQ_CNS3XXX_DMAC5		(IRQ_TC11MP_GIC_START + 42)
-#define IRQ_CNS3XXX_DMAC6		(IRQ_TC11MP_GIC_START + 43)
-#define IRQ_CNS3XXX_DMAC7		(IRQ_TC11MP_GIC_START + 44)
-#define IRQ_CNS3XXX_DMAC8		(IRQ_TC11MP_GIC_START + 45)
-#define IRQ_CNS3XXX_DMAC9		(IRQ_TC11MP_GIC_START + 46)
-#define IRQ_CNS3XXX_DMAC10		(IRQ_TC11MP_GIC_START + 47)
-#define IRQ_CNS3XXX_DMAC11		(IRQ_TC11MP_GIC_START + 48)
-#define IRQ_CNS3XXX_DMAC12		(IRQ_TC11MP_GIC_START + 49)
-#define IRQ_CNS3XXX_DMAC13		(IRQ_TC11MP_GIC_START + 50)
-#define IRQ_CNS3XXX_DMAC14		(IRQ_TC11MP_GIC_START + 51)
-#define IRQ_CNS3XXX_DMAC15		(IRQ_TC11MP_GIC_START + 52)
-#define IRQ_CNS3XXX_DMAC16		(IRQ_TC11MP_GIC_START + 53)
-#define IRQ_CNS3XXX_DMAC17		(IRQ_TC11MP_GIC_START + 54)
-
-#define IRQ_CNS3XXX_PCIE0_RC		(IRQ_TC11MP_GIC_START + 55)
-#define IRQ_CNS3XXX_PCIE1_RC		(IRQ_TC11MP_GIC_START + 56)
-#define IRQ_CNS3XXX_TIMER0		(IRQ_TC11MP_GIC_START + 57)
-#define IRQ_CNS3XXX_TIMER1		(IRQ_TC11MP_GIC_START + 58)
-#define IRQ_CNS3XXX_USB_OHCI		(IRQ_TC11MP_GIC_START + 59)
-#define IRQ_CNS3XXX_TIMER2		(IRQ_TC11MP_GIC_START + 60)
-#define IRQ_CNS3XXX_EXTERNAL_PIN0	(IRQ_TC11MP_GIC_START + 61)
-#define IRQ_CNS3XXX_EXTERNAL_PIN1	(IRQ_TC11MP_GIC_START + 62)
-#define IRQ_CNS3XXX_EXTERNAL_PIN2	(IRQ_TC11MP_GIC_START + 63)
-
-#define NR_IRQS_CNS3XXX			(IRQ_TC11MP_GIC_START + 64)
-
-#endif	/* __MACH_BOARD_CNS3XXX_H */
diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
deleted file mode 100644
index 3fc4ec830e3a..000000000000
--- a/arch/arm/mach-cns3xxx/core.c
+++ /dev/null
@@ -1,410 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 1999 - 2003 ARM Limited
- * Copyright 2000 Deep Blue Solutions Ltd
- * Copyright 2008 Cavium Networks
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/clockchips.h>
-#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/of_platform.h>
-#include <linux/platform_device.h>
-#include <linux/usb/ehci_pdriver.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-#include <asm/hardware/cache-l2x0.h>
-#include "cns3xxx.h"
-#include "core.h"
-#include "pm.h"
-
-static struct map_desc cns3xxx_io_desc[] __initdata = {
-	{
-		.virtual	= CNS3XXX_TC11MP_SCU_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_SCU_BASE),
-		.length		= SZ_8K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_TIMER1_2_3_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_TIMER1_2_3_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_MISC_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_MISC_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_PM_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_PM_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-#ifdef CONFIG_PCI
-	}, {
-		.virtual	= CNS3XXX_PCIE0_HOST_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_PCIE0_HOST_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_PCIE0_CFG0_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_PCIE0_CFG0_BASE),
-		.length		= SZ_64K, /* really 4 KiB at offset 32 KiB */
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_PCIE0_CFG1_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_PCIE0_CFG1_BASE),
-		.length		= SZ_16M,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_PCIE1_HOST_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_PCIE1_HOST_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_PCIE1_CFG0_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_PCIE1_CFG0_BASE),
-		.length		= SZ_64K, /* really 4 KiB at offset 32 KiB */
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_PCIE1_CFG1_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_PCIE1_CFG1_BASE),
-		.length		= SZ_16M,
-		.type		= MT_DEVICE,
-#endif
-	},
-};
-
-void __init cns3xxx_map_io(void)
-{
-	iotable_init(cns3xxx_io_desc, ARRAY_SIZE(cns3xxx_io_desc));
-}
-
-/* used by entry-macro.S */
-void __init cns3xxx_init_irq(void)
-{
-	gic_init(IOMEM(CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT),
-		 IOMEM(CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT));
-}
-
-void cns3xxx_power_off(void)
-{
-	u32 __iomem *pm_base = IOMEM(CNS3XXX_PM_BASE_VIRT);
-	u32 clkctrl;
-
-	printk(KERN_INFO "powering system down...\n");
-
-	clkctrl = readl(pm_base + PM_SYS_CLK_CTRL_OFFSET);
-	clkctrl &= 0xfffff1ff;
-	clkctrl |= (0x5 << 9);		/* Hibernate */
-	writel(clkctrl, pm_base + PM_SYS_CLK_CTRL_OFFSET);
-
-}
-
-/*
- * Timer
- */
-static void __iomem *cns3xxx_tmr1;
-
-static int cns3xxx_shutdown(struct clock_event_device *clk)
-{
-	writel(0, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-	return 0;
-}
-
-static int cns3xxx_set_oneshot(struct clock_event_device *clk)
-{
-	unsigned long ctrl = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-
-	/* period set, and timer enabled in 'next_event' hook */
-	ctrl |= (1 << 2) | (1 << 9);
-	writel(ctrl, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-	return 0;
-}
-
-static int cns3xxx_set_periodic(struct clock_event_device *clk)
-{
-	unsigned long ctrl = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-	int pclk = cns3xxx_cpu_clock() / 8;
-	int reload;
-
-	reload = pclk * 20 / (3 * HZ) * 0x25000;
-	writel(reload, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
-	ctrl |= (1 << 0) | (1 << 2) | (1 << 9);
-	writel(ctrl, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-	return 0;
-}
-
-static int cns3xxx_timer_set_next_event(unsigned long evt,
-					struct clock_event_device *unused)
-{
-	unsigned long ctrl = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-
-	writel(evt, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
-	writel(ctrl | (1 << 0), cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-
-	return 0;
-}
-
-static struct clock_event_device cns3xxx_tmr1_clockevent = {
-	.name			= "cns3xxx timer1",
-	.features		= CLOCK_EVT_FEAT_PERIODIC |
-				  CLOCK_EVT_FEAT_ONESHOT,
-	.set_state_shutdown	= cns3xxx_shutdown,
-	.set_state_periodic	= cns3xxx_set_periodic,
-	.set_state_oneshot	= cns3xxx_set_oneshot,
-	.tick_resume		= cns3xxx_shutdown,
-	.set_next_event		= cns3xxx_timer_set_next_event,
-	.rating			= 350,
-	.cpumask		= cpu_all_mask,
-};
-
-static void __init cns3xxx_clockevents_init(unsigned int timer_irq)
-{
-	cns3xxx_tmr1_clockevent.irq = timer_irq;
-	clockevents_config_and_register(&cns3xxx_tmr1_clockevent,
-					(cns3xxx_cpu_clock() >> 3) * 1000000,
-					0xf, 0xffffffff);
-}
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t cns3xxx_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &cns3xxx_tmr1_clockevent;
-	u32 __iomem *stat = cns3xxx_tmr1 + TIMER1_2_INTERRUPT_STATUS_OFFSET;
-	u32 val;
-
-	/* Clear the interrupt */
-	val = readl(stat);
-	writel(val & ~(1 << 2), stat);
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-/*
- * Set up the clock source and clock events devices
- */
-static void __init __cns3xxx_timer_init(unsigned int timer_irq)
-{
-	u32 val;
-	u32 irq_mask;
-
-	/*
-	 * Initialise to a known state (all timers off)
-	 */
-
-	/* disable timer1 and timer2 */
-	writel(0, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-	/* stop free running timer3 */
-	writel(0, cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET);
-
-	/* timer1 */
-	writel(0x5C800, cns3xxx_tmr1 + TIMER1_COUNTER_OFFSET);
-	writel(0x5C800, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
-
-	writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V1_OFFSET);
-	writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V2_OFFSET);
-
-	/* mask irq, non-mask timer1 overflow */
-	irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
-	irq_mask &= ~(1 << 2);
-	irq_mask |= 0x03;
-	writel(irq_mask, cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
-
-	/* down counter */
-	val = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-	val |= (1 << 9);
-	writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-
-	/* timer2 */
-	writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V1_OFFSET);
-	writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V2_OFFSET);
-
-	/* mask irq */
-	irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
-	irq_mask |= ((1 << 3) | (1 << 4) | (1 << 5));
-	writel(irq_mask, cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
-
-	/* down counter */
-	val = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-	val |= (1 << 10);
-	writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-
-	/* Make irqs happen for the system timer */
-	if (request_irq(timer_irq, cns3xxx_timer_interrupt,
-			IRQF_TIMER | IRQF_IRQPOLL, "timer", NULL))
-		pr_err("Failed to request irq %d (timer)\n", timer_irq);
-
-	cns3xxx_clockevents_init(timer_irq);
-}
-
-void __init cns3xxx_timer_init(void)
-{
-	cns3xxx_tmr1 = IOMEM(CNS3XXX_TIMER1_2_3_BASE_VIRT);
-
-	__cns3xxx_timer_init(IRQ_CNS3XXX_TIMER0);
-}
-
-#ifdef CONFIG_CACHE_L2X0
-
-void __init cns3xxx_l2x0_init(void)
-{
-	void __iomem *base = ioremap(CNS3XXX_L2C_BASE, SZ_4K);
-	u32 val;
-
-	if (WARN_ON(!base))
-		return;
-
-	/*
-	 * Tag RAM Control register
-	 *
-	 * bit[10:8]	- 1 cycle of write accesses latency
-	 * bit[6:4]	- 1 cycle of read accesses latency
-	 * bit[3:0]	- 1 cycle of setup latency
-	 *
-	 * 1 cycle of latency for setup, read and write accesses
-	 */
-	val = readl(base + L310_TAG_LATENCY_CTRL);
-	val &= 0xfffff888;
-	writel(val, base + L310_TAG_LATENCY_CTRL);
-
-	/*
-	 * Data RAM Control register
-	 *
-	 * bit[10:8]	- 1 cycles of write accesses latency
-	 * bit[6:4]	- 1 cycles of read accesses latency
-	 * bit[3:0]	- 1 cycle of setup latency
-	 *
-	 * 1 cycle of latency for setup, read and write accesses
-	 */
-	val = readl(base + L310_DATA_LATENCY_CTRL);
-	val &= 0xfffff888;
-	writel(val, base + L310_DATA_LATENCY_CTRL);
-
-	/* 32 KiB, 8-way, parity disable */
-	l2x0_init(base, 0x00500000, 0xfe0f0fff);
-}
-
-#endif /* CONFIG_CACHE_L2X0 */
-
-static int csn3xxx_usb_power_on(struct platform_device *pdev)
-{
-	/*
-	 * EHCI and OHCI share the same clock and power,
-	 * resetting twice would cause the 1st controller been reset.
-	 * Therefore only do power up  at the first up device, and
-	 * power down at the last down device.
-	 *
-	 * Set USB AHB INCR length to 16
-	 */
-	if (atomic_inc_return(&usb_pwr_ref) == 1) {
-		cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
-		cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
-		cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST);
-		__raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)),
-			MISC_CHIP_CONFIG_REG);
-	}
-
-	return 0;
-}
-
-static void csn3xxx_usb_power_off(struct platform_device *pdev)
-{
-	/*
-	 * EHCI and OHCI share the same clock and power,
-	 * resetting twice would cause the 1st controller been reset.
-	 * Therefore only do power up  at the first up device, and
-	 * power down at the last down device.
-	 */
-	if (atomic_dec_return(&usb_pwr_ref) == 0)
-		cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
-}
-
-static struct usb_ehci_pdata cns3xxx_usb_ehci_pdata = {
-	.power_on	= csn3xxx_usb_power_on,
-	.power_off	= csn3xxx_usb_power_off,
-};
-
-static struct usb_ohci_pdata cns3xxx_usb_ohci_pdata = {
-	.num_ports	= 1,
-	.power_on	= csn3xxx_usb_power_on,
-	.power_off	= csn3xxx_usb_power_off,
-};
-
-static const struct of_dev_auxdata cns3xxx_auxdata[] __initconst = {
-	{ "intel,usb-ehci", CNS3XXX_USB_BASE, "ehci-platform", &cns3xxx_usb_ehci_pdata },
-	{ "intel,usb-ohci", CNS3XXX_USB_OHCI_BASE, "ohci-platform", &cns3xxx_usb_ohci_pdata },
-	{ "cavium,cns3420-ahci", CNS3XXX_SATA2_BASE, "ahci", NULL },
-	{ "cavium,cns3420-sdhci", CNS3XXX_SDIO_BASE, "ahci", NULL },
-	{},
-};
-
-static void __init cns3xxx_init(void)
-{
-	struct device_node *dn;
-
-	cns3xxx_l2x0_init();
-
-	dn = of_find_compatible_node(NULL, NULL, "cavium,cns3420-ahci");
-	if (of_device_is_available(dn)) {
-		u32 tmp;
-	
-		tmp = __raw_readl(MISC_SATA_POWER_MODE);
-		tmp |= 0x1 << 16; /* Disable SATA PHY 0 from SLUMBER Mode */
-		tmp |= 0x1 << 17; /* Disable SATA PHY 1 from SLUMBER Mode */
-		__raw_writel(tmp, MISC_SATA_POWER_MODE);
-	
-		/* Enable SATA PHY */
-		cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0);
-		cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1);
-	
-		/* Enable SATA Clock */
-		cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_SATA);
-	
-		/* De-Asscer SATA Reset */
-		cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SATA));
-	}
-	of_node_put(dn);
-
-	dn = of_find_compatible_node(NULL, NULL, "cavium,cns3420-sdhci");
-	if (of_device_is_available(dn)) {
-		u32 __iomem *gpioa = IOMEM(CNS3XXX_MISC_BASE_VIRT + 0x0014);
-		u32 gpioa_pins = __raw_readl(gpioa);
-	
-		/* MMC/SD pins share with GPIOA */
-		gpioa_pins |= 0x1fff0004;
-		__raw_writel(gpioa_pins, gpioa);
-	
-		cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO));
-		cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO));
-	}
-	of_node_put(dn);
-
-	pm_power_off = cns3xxx_power_off;
-
-	of_platform_default_populate(NULL, cns3xxx_auxdata, NULL);
-}
-
-static const char *const cns3xxx_dt_compat[] __initconst = {
-	"cavium,cns3410",
-	"cavium,cns3420",
-	NULL,
-};
-
-DT_MACHINE_START(CNS3XXX_DT, "Cavium Networks CNS3xxx")
-	.dt_compat	= cns3xxx_dt_compat,
-	.map_io		= cns3xxx_map_io,
-	.init_irq	= cns3xxx_init_irq,
-	.init_time	= cns3xxx_timer_init,
-	.init_machine	= cns3xxx_init,
-	.init_late	= cns3xxx_pcie_init_late,
-	.restart	= cns3xxx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-cns3xxx/core.h b/arch/arm/mach-cns3xxx/core.h
deleted file mode 100644
index a96eabaea301..000000000000
--- a/arch/arm/mach-cns3xxx/core.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2000 Deep Blue Solutions Ltd
- * Copyright 2004 ARM Limited
- * Copyright 2008 Cavium Networks
- */
-
-#ifndef __CNS3XXX_CORE_H
-#define __CNS3XXX_CORE_H
-
-#include <linux/reboot.h>
-
-extern void cns3xxx_timer_init(void);
-
-#ifdef CONFIG_CACHE_L2X0
-void __init cns3xxx_l2x0_init(void);
-#else
-static inline void cns3xxx_l2x0_init(void) {}
-#endif /* CONFIG_CACHE_L2X0 */
-
-#ifdef CONFIG_PCI
-extern void __init cns3xxx_pcie_init_late(void);
-#else
-static inline void __init cns3xxx_pcie_init_late(void) {}
-#endif
-
-void __init cns3xxx_map_io(void);
-void __init cns3xxx_init_irq(void);
-void cns3xxx_power_off(void);
-void cns3xxx_restart(enum reboot_mode, const char *);
-
-#endif /* __CNS3XXX_CORE_H */
diff --git a/arch/arm/mach-cns3xxx/devices.c b/arch/arm/mach-cns3xxx/devices.c
deleted file mode 100644
index 0f1ba8a0377d..000000000000
--- a/arch/arm/mach-cns3xxx/devices.c
+++ /dev/null
@@ -1,108 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * CNS3xxx common devices
- *
- * Copyright 2008 Cavium Networks
- *		  Scott Shu
- * Copyright 2010 MontaVista Software, LLC.
- *		  Anton Vorontsov <avorontsov@mvista.com>
- */
-
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/compiler.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include "cns3xxx.h"
-#include "pm.h"
-#include "core.h"
-#include "devices.h"
-
-/*
- * AHCI
- */
-static struct resource cns3xxx_ahci_resource[] = {
-	[0] = {
-		.start	= CNS3XXX_SATA2_BASE,
-		.end	= CNS3XXX_SATA2_BASE + CNS3XXX_SATA2_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_CNS3XXX_SATA,
-		.end	= IRQ_CNS3XXX_SATA,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 cns3xxx_ahci_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device cns3xxx_ahci_pdev = {
-	.name		= "ahci",
-	.id		= 0,
-	.resource	= cns3xxx_ahci_resource,
-	.num_resources	= ARRAY_SIZE(cns3xxx_ahci_resource),
-	.dev		= {
-		.dma_mask		= &cns3xxx_ahci_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-void __init cns3xxx_ahci_init(void)
-{
-	u32 tmp;
-
-	tmp = __raw_readl(MISC_SATA_POWER_MODE);
-	tmp |= 0x1 << 16; /* Disable SATA PHY 0 from SLUMBER Mode */
-	tmp |= 0x1 << 17; /* Disable SATA PHY 1 from SLUMBER Mode */
-	__raw_writel(tmp, MISC_SATA_POWER_MODE);
-
-	/* Enable SATA PHY */
-	cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0);
-	cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1);
-
-	/* Enable SATA Clock */
-	cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_SATA);
-
-	/* De-Asscer SATA Reset */
-	cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SATA));
-
-	platform_device_register(&cns3xxx_ahci_pdev);
-}
-
-/*
- * SDHCI
- */
-static struct resource cns3xxx_sdhci_resources[] = {
-	[0] = {
-		.start = CNS3XXX_SDIO_BASE,
-		.end   = CNS3XXX_SDIO_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_CNS3XXX_SDIO,
-		.end   = IRQ_CNS3XXX_SDIO,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device cns3xxx_sdhci_pdev = {
-	.name		= "sdhci-cns3xxx",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(cns3xxx_sdhci_resources),
-	.resource	= cns3xxx_sdhci_resources,
-};
-
-void __init cns3xxx_sdhci_init(void)
-{
-	u32 __iomem *gpioa = IOMEM(CNS3XXX_MISC_BASE_VIRT + 0x0014);
-	u32 gpioa_pins = __raw_readl(gpioa);
-
-	/* MMC/SD pins share with GPIOA */
-	gpioa_pins |= 0x1fff0004;
-	__raw_writel(gpioa_pins, gpioa);
-
-	cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO));
-	cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO));
-
-	platform_device_register(&cns3xxx_sdhci_pdev);
-}
diff --git a/arch/arm/mach-cns3xxx/devices.h b/arch/arm/mach-cns3xxx/devices.h
deleted file mode 100644
index ab16530d0116..000000000000
--- a/arch/arm/mach-cns3xxx/devices.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * CNS3xxx common devices
- *
- * Copyright 2008 Cavium Networks
- *		  Scott Shu
- * Copyright 2010 MontaVista Software, LLC.
- *		  Anton Vorontsov <avorontsov@mvista.com>
- */
-
-#ifndef __CNS3XXX_DEVICES_H_
-#define __CNS3XXX_DEVICES_H_
-
-void __init cns3xxx_ahci_init(void);
-void __init cns3xxx_sdhci_init(void);
-
-#endif /* __CNS3XXX_DEVICES_H_ */
diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c
deleted file mode 100644
index e92fbd679dfb..000000000000
--- a/arch/arm/mach-cns3xxx/pcie.c
+++ /dev/null
@@ -1,290 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * PCI-E support for CNS3xxx
- *
- * Copyright 2008 Cavium Networks
- *		  Richard Liu <richard.liu@caviumnetworks.com>
- * Copyright 2010 MontaVista Software, LLC.
- *		  Anton Vorontsov <avorontsov@mvista.com>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/bug.h>
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/ptrace.h>
-#include <asm/mach/map.h>
-#include "cns3xxx.h"
-#include "core.h"
-
-struct cns3xxx_pcie {
-	void __iomem *host_regs; /* PCI config registers for host bridge */
-	void __iomem *cfg0_regs; /* PCI Type 0 config registers */
-	void __iomem *cfg1_regs; /* PCI Type 1 config registers */
-	unsigned int irqs[2];
-	struct resource res_io;
-	struct resource res_mem;
-	int port;
-	bool linked;
-};
-
-static struct cns3xxx_pcie *sysdata_to_cnspci(void *sysdata)
-{
-	struct pci_sys_data *root = sysdata;
-
-	return root->private_data;
-}
-
-static struct cns3xxx_pcie *pdev_to_cnspci(const struct pci_dev *dev)
-{
-	return sysdata_to_cnspci(dev->sysdata);
-}
-
-static struct cns3xxx_pcie *pbus_to_cnspci(struct pci_bus *bus)
-{
-	return sysdata_to_cnspci(bus->sysdata);
-}
-
-static void __iomem *cns3xxx_pci_map_bus(struct pci_bus *bus,
-					 unsigned int devfn, int where)
-{
-	struct cns3xxx_pcie *cnspci = pbus_to_cnspci(bus);
-	int busno = bus->number;
-	int slot = PCI_SLOT(devfn);
-	void __iomem *base;
-
-	/* If there is no link, just show the CNS PCI bridge. */
-	if (!cnspci->linked && busno > 0)
-		return NULL;
-
-	/*
-	 * The CNS PCI bridge doesn't fit into the PCI hierarchy, though
-	 * we still want to access it.
-	 * We place the host bridge on bus 0, and the directly connected
-	 * device on bus 1, slot 0.
-	 */
-	if (busno == 0) { /* internal PCIe bus, host bridge device */
-		if (devfn == 0) /* device# and function# are ignored by hw */
-			base = cnspci->host_regs;
-		else
-			return NULL; /* no such device */
-
-	} else if (busno == 1) { /* directly connected PCIe device */
-		if (slot == 0) /* device# is ignored by hw */
-			base = cnspci->cfg0_regs;
-		else
-			return NULL; /* no such device */
-	} else /* remote PCI bus */
-		base = cnspci->cfg1_regs + ((busno & 0xf) << 20);
-
-	return base + where + (devfn << 12);
-}
-
-static int cns3xxx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
-				   int where, int size, u32 *val)
-{
-	int ret;
-	u32 mask = (0x1ull << (size * 8)) - 1;
-	int shift = (where % 4) * 8;
-
-	ret = pci_generic_config_read(bus, devfn, where, size, val);
-
-	if (ret == PCIBIOS_SUCCESSFUL && !bus->number && !devfn &&
-	    (where & 0xffc) == PCI_CLASS_REVISION)
-		/*
-		 * RC's class is 0xb, but Linux PCI driver needs 0x604
-		 * for a PCIe bridge. So we must fixup the class code
-		 * to 0x604 here.
-		 */
-		*val = ((((*val << shift) & 0xff) | (0x604 << 16)) >> shift) & mask;
-
-	return ret;
-}
-
-static int cns3xxx_pci_setup(int nr, struct pci_sys_data *sys)
-{
-	struct cns3xxx_pcie *cnspci = sysdata_to_cnspci(sys);
-	struct resource *res_io = &cnspci->res_io;
-	struct resource *res_mem = &cnspci->res_mem;
-
-	BUG_ON(request_resource(&iomem_resource, res_io) ||
-	       request_resource(&iomem_resource, res_mem));
-
-	pci_add_resource_offset(&sys->resources, res_io, sys->io_offset);
-	pci_add_resource_offset(&sys->resources, res_mem, sys->mem_offset);
-
-	return 1;
-}
-
-static struct pci_ops cns3xxx_pcie_ops = {
-	.map_bus = cns3xxx_pci_map_bus,
-	.read = cns3xxx_pci_read_config,
-	.write = pci_generic_config_write,
-};
-
-static int cns3xxx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	struct cns3xxx_pcie *cnspci = pdev_to_cnspci(dev);
-	int irq = cnspci->irqs[!!dev->bus->number];
-
-	pr_info("PCIe map irq: %04d:%02x:%02x.%02x slot %d, pin %d, irq: %d\n",
-		pci_domain_nr(dev->bus), dev->bus->number, PCI_SLOT(dev->devfn),
-		PCI_FUNC(dev->devfn), slot, pin, irq);
-
-	return irq;
-}
-
-static struct cns3xxx_pcie cns3xxx_pcie[] = {
-	[0] = {
-		.host_regs = (void __iomem *)CNS3XXX_PCIE0_HOST_BASE_VIRT,
-		.cfg0_regs = (void __iomem *)CNS3XXX_PCIE0_CFG0_BASE_VIRT,
-		.cfg1_regs = (void __iomem *)CNS3XXX_PCIE0_CFG1_BASE_VIRT,
-		.res_io = {
-			.name = "PCIe0 I/O space",
-			.start = CNS3XXX_PCIE0_IO_BASE,
-			.end = CNS3XXX_PCIE0_CFG0_BASE - 1, /* 16 MiB */
-			.flags = IORESOURCE_IO,
-		},
-		.res_mem = {
-			.name = "PCIe0 non-prefetchable",
-			.start = CNS3XXX_PCIE0_MEM_BASE,
-			.end = CNS3XXX_PCIE0_HOST_BASE - 1, /* 176 MiB */
-			.flags = IORESOURCE_MEM,
-		},
-		.irqs = { IRQ_CNS3XXX_PCIE0_RC, IRQ_CNS3XXX_PCIE0_DEVICE, },
-		.port = 0,
-	},
-	[1] = {
-		.host_regs = (void __iomem *)CNS3XXX_PCIE1_HOST_BASE_VIRT,
-		.cfg0_regs = (void __iomem *)CNS3XXX_PCIE1_CFG0_BASE_VIRT,
-		.cfg1_regs = (void __iomem *)CNS3XXX_PCIE1_CFG1_BASE_VIRT,
-		.res_io = {
-			.name = "PCIe1 I/O space",
-			.start = CNS3XXX_PCIE1_IO_BASE,
-			.end = CNS3XXX_PCIE1_CFG0_BASE - 1, /* 16 MiB */
-			.flags = IORESOURCE_IO,
-		},
-		.res_mem = {
-			.name = "PCIe1 non-prefetchable",
-			.start = CNS3XXX_PCIE1_MEM_BASE,
-			.end = CNS3XXX_PCIE1_HOST_BASE - 1, /* 176 MiB */
-			.flags = IORESOURCE_MEM,
-		},
-		.irqs = { IRQ_CNS3XXX_PCIE1_RC, IRQ_CNS3XXX_PCIE1_DEVICE, },
-		.port = 1,
-	},
-};
-
-static void __init cns3xxx_pcie_check_link(struct cns3xxx_pcie *cnspci)
-{
-	int port = cnspci->port;
-	u32 reg;
-	unsigned long time;
-
-	reg = __raw_readl(MISC_PCIE_CTRL(port));
-	/*
-	 * Enable Application Request to 1, it will exit L1 automatically,
-	 * but when chip back, it will use another clock, still can use 0x1.
-	 */
-	reg |= 0x3;
-	__raw_writel(reg, MISC_PCIE_CTRL(port));
-
-	pr_info("PCIe: Port[%d] Enable PCIe LTSSM\n", port);
-	pr_info("PCIe: Port[%d] Check data link layer...", port);
-
-	time = jiffies;
-	while (1) {
-		reg = __raw_readl(MISC_PCIE_PM_DEBUG(port));
-		if (reg & 0x1) {
-			pr_info("Link up.\n");
-			cnspci->linked = 1;
-			break;
-		} else if (time_after(jiffies, time + 50)) {
-			pr_info("Device not found.\n");
-			break;
-		}
-	}
-}
-
-static void cns3xxx_write_config(struct cns3xxx_pcie *cnspci,
-					 int where, int size, u32 val)
-{
-	void __iomem *base = cnspci->host_regs + (where & 0xffc);
-	u32 v;
-	u32 mask = (0x1ull << (size * 8)) - 1;
-	int shift = (where % 4) * 8;
-
-	v = readl_relaxed(base);
-
-	v &= ~(mask << shift);
-	v |= (val & mask) << shift;
-
-	writel_relaxed(v, base);
-	readl_relaxed(base);
-}
-
-static void __init cns3xxx_pcie_hw_init(struct cns3xxx_pcie *cnspci)
-{
-	u16 mem_base  = cnspci->res_mem.start >> 16;
-	u16 mem_limit = cnspci->res_mem.end   >> 16;
-	u16 io_base   = cnspci->res_io.start  >> 16;
-	u16 io_limit  = cnspci->res_io.end    >> 16;
-
-	cns3xxx_write_config(cnspci, PCI_PRIMARY_BUS, 1, 0);
-	cns3xxx_write_config(cnspci, PCI_SECONDARY_BUS, 1, 1);
-	cns3xxx_write_config(cnspci, PCI_SUBORDINATE_BUS, 1, 1);
-	cns3xxx_write_config(cnspci, PCI_MEMORY_BASE, 2, mem_base);
-	cns3xxx_write_config(cnspci, PCI_MEMORY_LIMIT, 2, mem_limit);
-	cns3xxx_write_config(cnspci, PCI_IO_BASE_UPPER16, 2, io_base);
-	cns3xxx_write_config(cnspci, PCI_IO_LIMIT_UPPER16, 2, io_limit);
-
-	if (!cnspci->linked)
-		return;
-
-	/* Set Device Max_Read_Request_Size to 128 byte */
-	pcie_bus_config = PCIE_BUS_PEER2PEER;
-
-	/* Disable PCIe0 Interrupt Mask INTA to INTD */
-	__raw_writel(~0x3FFF, MISC_PCIE_INT_MASK(cnspci->port));
-}
-
-static int cns3xxx_pcie_abort_handler(unsigned long addr, unsigned int fsr,
-				      struct pt_regs *regs)
-{
-	if (fsr & (1 << 10))
-		regs->ARM_pc += 4;
-	return 0;
-}
-
-void __init cns3xxx_pcie_init_late(void)
-{
-	int i;
-	void *private_data;
-	struct hw_pci hw_pci = {
-	       .nr_controllers = 1,
-	       .ops = &cns3xxx_pcie_ops,
-	       .setup = cns3xxx_pci_setup,
-	       .map_irq = cns3xxx_pcie_map_irq,
-	       .private_data = &private_data,
-	};
-
-	pcibios_min_io = 0;
-	pcibios_min_mem = 0;
-
-	hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS, 0,
-			"imprecise external abort");
-
-	for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {
-		cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_PCIE(i));
-		cns3xxx_pwr_soft_rst(0x1 << PM_SOFT_RST_REG_OFFST_PCIE(i));
-		cns3xxx_pcie_check_link(&cns3xxx_pcie[i]);
-		cns3xxx_pcie_hw_init(&cns3xxx_pcie[i]);
-		private_data = &cns3xxx_pcie[i];
-		pci_common_init(&hw_pci);
-	}
-
-	pci_assign_unassigned_resources();
-}
diff --git a/arch/arm/mach-cns3xxx/pm.c b/arch/arm/mach-cns3xxx/pm.c
deleted file mode 100644
index 72e8a7ec7a38..000000000000
--- a/arch/arm/mach-cns3xxx/pm.c
+++ /dev/null
@@ -1,120 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2008 Cavium Networks
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/atomic.h>
-#include "cns3xxx.h"
-#include "pm.h"
-#include "core.h"
-
-void cns3xxx_pwr_clk_en(unsigned int block)
-{
-	u32 reg = __raw_readl(PM_CLK_GATE_REG);
-
-	reg |= (block & PM_CLK_GATE_REG_MASK);
-	__raw_writel(reg, PM_CLK_GATE_REG);
-}
-EXPORT_SYMBOL(cns3xxx_pwr_clk_en);
-
-void cns3xxx_pwr_clk_dis(unsigned int block)
-{
-	u32 reg = __raw_readl(PM_CLK_GATE_REG);
-
-	reg &= ~(block & PM_CLK_GATE_REG_MASK);
-	__raw_writel(reg, PM_CLK_GATE_REG);
-}
-EXPORT_SYMBOL(cns3xxx_pwr_clk_dis);
-
-void cns3xxx_pwr_power_up(unsigned int block)
-{
-	u32 reg = __raw_readl(PM_PLL_HM_PD_CTRL_REG);
-
-	reg &= ~(block & CNS3XXX_PWR_PLL_ALL);
-	__raw_writel(reg, PM_PLL_HM_PD_CTRL_REG);
-
-	/* Wait for 300us for the PLL output clock locked. */
-	udelay(300);
-};
-EXPORT_SYMBOL(cns3xxx_pwr_power_up);
-
-void cns3xxx_pwr_power_down(unsigned int block)
-{
-	u32 reg = __raw_readl(PM_PLL_HM_PD_CTRL_REG);
-
-	/* write '1' to power down */
-	reg |= (block & CNS3XXX_PWR_PLL_ALL);
-	__raw_writel(reg, PM_PLL_HM_PD_CTRL_REG);
-};
-EXPORT_SYMBOL(cns3xxx_pwr_power_down);
-
-static void cns3xxx_pwr_soft_rst_force(unsigned int block)
-{
-	u32 reg = __raw_readl(PM_SOFT_RST_REG);
-
-	/*
-	 * bit 0, 28, 29 => program low to reset,
-	 * the other else program low and then high
-	 */
-	if (block & 0x30000001) {
-		reg &= ~(block & PM_SOFT_RST_REG_MASK);
-	} else {
-		reg &= ~(block & PM_SOFT_RST_REG_MASK);
-		__raw_writel(reg, PM_SOFT_RST_REG);
-		reg |= (block & PM_SOFT_RST_REG_MASK);
-	}
-
-	__raw_writel(reg, PM_SOFT_RST_REG);
-}
-
-void cns3xxx_pwr_soft_rst(unsigned int block)
-{
-	static unsigned int soft_reset;
-
-	if (soft_reset & block) {
-		/* SPI/I2C/GPIO use the same block, reset once. */
-		return;
-	} else {
-		soft_reset |= block;
-	}
-	cns3xxx_pwr_soft_rst_force(block);
-}
-EXPORT_SYMBOL(cns3xxx_pwr_soft_rst);
-
-void cns3xxx_restart(enum reboot_mode mode, const char *cmd)
-{
-	/*
-	 * To reset, we hit the on-board reset register
-	 * in the system FPGA.
-	 */
-	cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(GLOBAL));
-}
-
-/*
- * cns3xxx_cpu_clock - return CPU/L2 clock
- *  aclk: cpu clock/2
- *  hclk: cpu clock/4
- *  pclk: cpu clock/8
- */
-int cns3xxx_cpu_clock(void)
-{
-	u32 reg = __raw_readl(PM_CLK_CTRL_REG);
-	int cpu;
-	int cpu_sel;
-	int div_sel;
-
-	cpu_sel = (reg >> PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL) & 0xf;
-	div_sel = (reg >> PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV) & 0x3;
-
-	cpu = (300 + ((cpu_sel / 3) * 100) + ((cpu_sel % 3) * 33)) >> div_sel;
-
-	return cpu;
-}
-EXPORT_SYMBOL(cns3xxx_cpu_clock);
-
-atomic_t usb_pwr_ref = ATOMIC_INIT(0);
-EXPORT_SYMBOL(usb_pwr_ref);
diff --git a/arch/arm/mach-cns3xxx/pm.h b/arch/arm/mach-cns3xxx/pm.h
deleted file mode 100644
index 61b73e59f0ff..000000000000
--- a/arch/arm/mach-cns3xxx/pm.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2000 Deep Blue Solutions Ltd
- * Copyright 2004 ARM Limited
- * Copyright 2008 Cavium Networks
- */
-
-#ifndef __CNS3XXX_PM_H
-#define __CNS3XXX_PM_H
-
-#include <linux/atomic.h>
-
-void cns3xxx_pwr_clk_en(unsigned int block);
-void cns3xxx_pwr_clk_dis(unsigned int block);
-void cns3xxx_pwr_power_up(unsigned int block);
-void cns3xxx_pwr_power_down(unsigned int block);
-
-extern atomic_t usb_pwr_ref;
-
-#endif /* __CNS3XXX_PM_H */
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index c8cbd9a30791..4316e1370627 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -14,21 +14,10 @@ menuconfig ARCH_DAVINCI
 
 if ARCH_DAVINCI
 
-config ARCH_DAVINCI_DMx
-	bool
-
 comment "DaVinci Core Type"
 
-config ARCH_DAVINCI_DM355
-	bool "DaVinci 355 based system"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select DAVINCI_AINTC
-	select ARCH_DAVINCI_DMx
-
 config ARCH_DAVINCI_DA830
 	bool "DA830/OMAP-L137/AM17x based system"
-	depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
-	depends on ATAGS
 	select ARCH_DAVINCI_DA8XX
 	# needed on silicon revs 1.0, 1.1:
 	select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE
@@ -36,142 +25,11 @@ config ARCH_DAVINCI_DA830
 
 config ARCH_DAVINCI_DA850
 	bool "DA850/OMAP-L138/AM18x based system"
-	depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
-	depends on ATAGS
-	select ARCH_DAVINCI_DA8XX
 	select DAVINCI_CP_INTC
 
 config ARCH_DAVINCI_DA8XX
 	bool
 
-config ARCH_DAVINCI_DM365
-	bool "DaVinci 365 based system"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select DAVINCI_AINTC
-	select ARCH_DAVINCI_DMx
-
-comment "DaVinci Board Type"
-
-config MACH_DA8XX_DT
-	bool "Support DA8XX platforms using device tree"
-	default y
-	depends on ARCH_DAVINCI_DA850
-	select PINCTRL
-	help
-	  Say y here to include support for TI DaVinci DA850 based using
-	  Flattened Device Tree. More information at Documentation/devicetree
-
-config MACH_DAVINCI_DM355_EVM
-	bool "TI DM355 EVM"
-	default ARCH_DAVINCI_DM355
-	depends on ARCH_DAVINCI_DM355
-	help
-	  Configure this option to specify the whether the board used
-	  for development is a DM355 EVM
-
-config MACH_DM355_LEOPARD
-	bool "DM355 Leopard board"
-	depends on ARCH_DAVINCI_DM355
-	help
-	  Configure this option to specify the whether the board used
-	  for development is a DM355 Leopard board.
-
-config MACH_DAVINCI_DM365_EVM
-	bool "TI DM365 EVM"
-	default ARCH_DAVINCI_DM365
-	depends on ARCH_DAVINCI_DM365
-	help
-	  Configure this option to specify whether the board used
-	  for development is a DM365 EVM
-
-config MACH_DAVINCI_DA830_EVM
-	bool "TI DA830/OMAP-L137/AM17x Reference Platform"
-	default ARCH_DAVINCI_DA830
-	depends on ATAGS && UNUSED_BOARD_FILES
-	depends on ARCH_DAVINCI_DA830
-	select GPIO_PCF857X if I2C
-	help
-	  Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
-
-choice
-	prompt "Select DA830/OMAP-L137/AM17x UI board peripheral"
-	depends on MACH_DAVINCI_DA830_EVM
-	help
-	  The presence of UI card on the DA830/OMAP-L137/AM17x EVM is
-	  detected automatically based on successful probe of the I2C
-	  based GPIO expander on that board. This option selected in this
-	  menu has an effect only in case of a successful UI card detection.
-
-config DA830_UI_LCD
-	bool "LCD"
-	help
-	  Say Y here to use the LCD as a framebuffer or simple character
-	  display.
-
-config DA830_UI_NAND
-	bool "NAND flash"
-	help
-	  Say Y here to use the NAND flash. Do not forget to setup
-	  the switch correctly.
-endchoice
-
-config MACH_DAVINCI_DA850_EVM
-	bool "TI DA850/OMAP-L138/AM18x Reference Platform"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	default ARCH_DAVINCI_DA850
-	depends on ARCH_DAVINCI_DA850
-	help
-	  Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module.
-
-choice
-	prompt "Select peripherals connected to expander on UI board"
-	depends on MACH_DAVINCI_DA850_EVM
-	help
-	  The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x
-	  EVM is detected automatically based on successful probe of the I2C
-	  based GPIO expander on that card. This option selected in this
-	  menu has an effect only in case of a successful UI card detection.
-
-config DA850_UI_NONE
-	bool "No peripheral is enabled"
-	help
-	  Say Y if you do not want to enable any of the peripherals connected
-	  to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card
-
-config DA850_UI_RMII
-	bool "RMII Ethernet PHY"
-	help
-	  Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x
-	  EVM. This PHY is found on the UI daughter card that is supplied with
-	  the EVM.
-	  NOTE: Please take care while choosing this option, MII PHY will
-	  not be functional if RMII mode is selected.
-
-config DA850_UI_SD_VIDEO_PORT
-	bool "Video Port Interface"
-	help
-	  Say Y if you want to use Video Port Interface (VPIF) on the
-	  DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the
-	  UI daughter card that is supplied with the EVM.
-
-endchoice
-
-config MACH_MITYOMAPL138
-	bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
-	depends on ARCH_DAVINCI_DA850
-	depends on ATAGS && UNUSED_BOARD_FILES
-	help
-	  Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
-	  System on Module.  Information on this SoM may be found at
-	  https://www.mitydsp.com
-
-config MACH_OMAPL138_HAWKBOARD
-	bool "TI AM1808 / OMAPL-138 Hawkboard platform"
-	depends on ARCH_DAVINCI_DA850
-	depends on ATAGS && UNUSED_BOARD_FILES
-	help
-	  Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
-
 config DAVINCI_MUX
 	bool "DAVINCI multiplexing support"
 	depends on ARCH_DAVINCI
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 3f4894aa7528..450883ea0e73 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -5,25 +5,15 @@
 #
 #
 # Common objects
-obj-y 					:= serial.o usb.o common.o sram.o
+obj-y 					:= common.o sram.o devices-da8xx.o
 
 obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
 
 # Chip specific
-obj-$(CONFIG_ARCH_DAVINCI_DM355)        += dm355.o devices.o
-obj-$(CONFIG_ARCH_DAVINCI_DM365)	+= dm365.o devices.o
-obj-$(CONFIG_ARCH_DAVINCI_DA830)	+= da830.o devices-da8xx.o usb-da8xx.o
-obj-$(CONFIG_ARCH_DAVINCI_DA850)	+= da850.o devices-da8xx.o usb-da8xx.o
+obj-$(CONFIG_ARCH_DAVINCI_DA830)	+= da830.o
+obj-$(CONFIG_ARCH_DAVINCI_DA850)	+= da850.o pdata-quirks.o
 
-# Board specific
-obj-$(CONFIG_MACH_DA8XX_DT)		+= da8xx-dt.o pdata-quirks.o
-obj-$(CONFIG_MACH_DAVINCI_DM355_EVM)	+= board-dm355-evm.o
-obj-$(CONFIG_MACH_DM355_LEOPARD)	+= board-dm355-leopard.o
-obj-$(CONFIG_MACH_DAVINCI_DM365_EVM)	+= board-dm365-evm.o
-obj-$(CONFIG_MACH_DAVINCI_DA830_EVM)	+= board-da830-evm.o
-obj-$(CONFIG_MACH_DAVINCI_DA850_EVM)	+= board-da850-evm.o
-obj-$(CONFIG_MACH_MITYOMAPL138)		+= board-mityomapl138.o
-obj-$(CONFIG_MACH_OMAPL138_HAWKBOARD)	+= board-omapl138-hawk.o
+obj-y					+= da8xx-dt.o
 
 # Power Management
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
diff --git a/arch/arm/mach-davinci/asp.h b/arch/arm/mach-davinci/asp.h
deleted file mode 100644
index d0ecd1d0f084..000000000000
--- a/arch/arm/mach-davinci/asp.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * TI DaVinci Audio definitions
- */
-#ifndef __ASM_ARCH_DAVINCI_ASP_H
-#define __ASM_ARCH_DAVINCI_ASP_H
-
-/* Bases of dm644x and dm355 register banks */
-#define DAVINCI_ASP0_BASE	0x01E02000
-#define DAVINCI_ASP1_BASE	0x01E04000
-
-/* Bases of dm365 register banks */
-#define DAVINCI_DM365_ASP0_BASE	0x01D02000
-
-/* Bases of dm646x register banks */
-#define DAVINCI_DM646X_MCASP0_REG_BASE		0x01D01000
-#define DAVINCI_DM646X_MCASP1_REG_BASE		0x01D01800
-
-/* Bases of da850/da830 McASP0  register banks */
-#define DAVINCI_DA8XX_MCASP0_REG_BASE	0x01D00000
-
-/* Bases of da830 McASP1 register banks */
-#define DAVINCI_DA830_MCASP1_REG_BASE	0x01D04000
-
-/* Bases of da830 McASP2 register banks */
-#define DAVINCI_DA830_MCASP2_REG_BASE	0x01D08000
-
-/* EDMA channels of dm644x and dm355 */
-#define DAVINCI_DMA_ASP0_TX	2
-#define DAVINCI_DMA_ASP0_RX	3
-#define DAVINCI_DMA_ASP1_TX	8
-#define DAVINCI_DMA_ASP1_RX	9
-
-/* EDMA channels of dm646x */
-#define DAVINCI_DM646X_DMA_MCASP0_AXEVT0	6
-#define DAVINCI_DM646X_DMA_MCASP0_AREVT0	9
-#define DAVINCI_DM646X_DMA_MCASP1_AXEVT1	12
-
-/* EDMA channels of da850/da830 McASP0 */
-#define DAVINCI_DA8XX_DMA_MCASP0_AREVT	0
-#define DAVINCI_DA8XX_DMA_MCASP0_AXEVT	1
-
-/* EDMA channels of da830 McASP1 */
-#define DAVINCI_DA830_DMA_MCASP1_AREVT	2
-#define DAVINCI_DA830_DMA_MCASP1_AXEVT	3
-
-/* EDMA channels of da830 McASP2 */
-#define DAVINCI_DA830_DMA_MCASP2_AREVT	4
-#define DAVINCI_DA830_DMA_MCASP2_AXEVT	5
-
-/* Interrupts */
-#define DAVINCI_ASP0_RX_INT	DAVINCI_INTC_IRQ(IRQ_MBRINT)
-#define DAVINCI_ASP0_TX_INT	DAVINCI_INTC_IRQ(IRQ_MBXINT)
-#define DAVINCI_ASP1_RX_INT	DAVINCI_INTC_IRQ(IRQ_MBRINT)
-#define DAVINCI_ASP1_TX_INT	DAVINCI_INTC_IRQ(IRQ_MBXINT)
-
-#endif /* __ASM_ARCH_DAVINCI_ASP_H */
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
deleted file mode 100644
index 6299e5c8f4ea..000000000000
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ /dev/null
@@ -1,690 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * TI DA830/OMAP L137 EVM board
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- * Derived from: arch/arm/mach-davinci/board-dm644x-evm.c
- *
- * 2007, 2009 (c) MontaVista Software, Inc.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/pcf857x.h>
-#include <linux/property.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
-#include <linux/platform_data/spi-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
-#include <linux/platform_data/ti-aemif.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/nvmem-provider.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "mux.h"
-#include "da8xx.h"
-#include "irqs.h"
-
-#define DA830_EVM_PHY_ID		""
-/*
- * USB1 VBUS is controlled by GPIO1[15], over-current is reported on GPIO2[4].
- */
-#define ON_BD_USB_DRV	GPIO_TO_PIN(1, 15)
-#define ON_BD_USB_OVC	GPIO_TO_PIN(2, 4)
-
-static const short da830_evm_usb11_pins[] = {
-	DA830_GPIO1_15, DA830_GPIO2_4,
-	-1
-};
-
-static struct regulator_consumer_supply da830_evm_usb_supplies[] = {
-	REGULATOR_SUPPLY("vbus", NULL),
-};
-
-static struct regulator_init_data da830_evm_usb_vbus_data = {
-	.consumer_supplies	= da830_evm_usb_supplies,
-	.num_consumer_supplies	= ARRAY_SIZE(da830_evm_usb_supplies),
-	.constraints    = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct fixed_voltage_config da830_evm_usb_vbus = {
-	.supply_name		= "vbus",
-	.microvolts		= 33000000,
-	.init_data		= &da830_evm_usb_vbus_data,
-};
-
-static struct platform_device da830_evm_usb_vbus_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &da830_evm_usb_vbus,
-	},
-};
-
-static struct gpiod_lookup_table da830_evm_usb_oc_gpio_lookup = {
-	.dev_id		= "ohci-da8xx",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", ON_BD_USB_OVC, "oc", 0),
-		{ }
-	},
-};
-
-static struct gpiod_lookup_table da830_evm_usb_vbus_gpio_lookup = {
-	.dev_id		= "reg-fixed-voltage.0",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", ON_BD_USB_DRV, NULL, 0),
-		{ }
-	},
-};
-
-static struct gpiod_lookup_table *da830_evm_usb_gpio_lookups[] = {
-	&da830_evm_usb_oc_gpio_lookup,
-	&da830_evm_usb_vbus_gpio_lookup,
-};
-
-static struct da8xx_ohci_root_hub da830_evm_usb11_pdata = {
-	/* TPS2065 switch @ 5V */
-	.potpgt		= (3 + 1) / 2,	/* 3 ms max */
-};
-
-static __init void da830_evm_usb_init(void)
-{
-	int ret;
-
-	ret = da8xx_register_usb_phy_clocks();
-	if (ret)
-		pr_warn("%s: USB PHY CLK registration failed: %d\n",
-			__func__, ret);
-
-	gpiod_add_lookup_tables(da830_evm_usb_gpio_lookups,
-				ARRAY_SIZE(da830_evm_usb_gpio_lookups));
-
-	ret = da8xx_register_usb_phy();
-	if (ret)
-		pr_warn("%s: USB PHY registration failed: %d\n",
-			__func__, ret);
-
-	ret = davinci_cfg_reg(DA830_USB0_DRVVBUS);
-	if (ret)
-		pr_warn("%s: USB 2.0 PinMux setup failed: %d\n", __func__, ret);
-	else {
-		/*
-		 * TPS2065 switch @ 5V supplies 1 A (sustains 1.5 A),
-		 * with the power on to power good time of 3 ms.
-		 */
-		ret = da8xx_register_usb20(1000, 3);
-		if (ret)
-			pr_warn("%s: USB 2.0 registration failed: %d\n",
-				__func__, ret);
-	}
-
-	ret = davinci_cfg_reg_list(da830_evm_usb11_pins);
-	if (ret) {
-		pr_warn("%s: USB 1.1 PinMux setup failed: %d\n", __func__, ret);
-		return;
-	}
-
-	ret = platform_device_register(&da830_evm_usb_vbus_device);
-	if (ret) {
-		pr_warn("%s: Unable to register the vbus supply\n", __func__);
-		return;
-	}
-
-	ret = da8xx_register_usb11(&da830_evm_usb11_pdata);
-	if (ret)
-		pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret);
-}
-
-static const short da830_evm_mcasp1_pins[] = {
-	DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1, DA830_AHCLKR1, DA830_AFSR1,
-	DA830_AMUTE1, DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_5,
-	DA830_ACLKR1, DA830_AXR1_6, DA830_AXR1_7, DA830_AXR1_8, DA830_AXR1_10,
-	DA830_AXR1_11,
-	-1
-};
-
-static u8 da830_iis_serializer_direction[] = {
-	RX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
-	INACTIVE_MODE,	TX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
-	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
-};
-
-static struct snd_platform_data da830_evm_snd_data = {
-	.tx_dma_offset  = 0x2000,
-	.rx_dma_offset  = 0x2000,
-	.op_mode        = DAVINCI_MCASP_IIS_MODE,
-	.num_serializer = ARRAY_SIZE(da830_iis_serializer_direction),
-	.tdm_slots      = 2,
-	.serial_dir     = da830_iis_serializer_direction,
-	.asp_chan_q     = EVENTQ_0,
-	.version	= MCASP_VERSION_2,
-	.txnumevt	= 1,
-	.rxnumevt	= 1,
-};
-
-/*
- * GPIO2[1] is used as MMC_SD_WP and GPIO2[2] as MMC_SD_INS.
- */
-static const short da830_evm_mmc_sd_pins[] = {
-	DA830_MMCSD_DAT_0, DA830_MMCSD_DAT_1, DA830_MMCSD_DAT_2,
-	DA830_MMCSD_DAT_3, DA830_MMCSD_DAT_4, DA830_MMCSD_DAT_5,
-	DA830_MMCSD_DAT_6, DA830_MMCSD_DAT_7, DA830_MMCSD_CLK,
-	DA830_MMCSD_CMD,   DA830_GPIO2_1,     DA830_GPIO2_2,
-	-1
-};
-
-#define DA830_MMCSD_WP_PIN		GPIO_TO_PIN(2, 1)
-#define DA830_MMCSD_CD_PIN		GPIO_TO_PIN(2, 2)
-
-static struct gpiod_lookup_table mmc_gpios_table = {
-	.dev_id = "da830-mmc.0",
-	.table = {
-		/* gpio chip 1 contains gpio range 32-63 */
-		GPIO_LOOKUP("davinci_gpio", DA830_MMCSD_CD_PIN, "cd",
-			    GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("davinci_gpio", DA830_MMCSD_WP_PIN, "wp",
-			    GPIO_ACTIVE_LOW),
-		{ }
-	},
-};
-
-static struct davinci_mmc_config da830_evm_mmc_config = {
-	.wires			= 8,
-	.max_freq		= 50000000,
-	.caps			= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-static inline void da830_evm_init_mmc(void)
-{
-	int ret;
-
-	ret = davinci_cfg_reg_list(da830_evm_mmc_sd_pins);
-	if (ret) {
-		pr_warn("%s: mmc/sd mux setup failed: %d\n", __func__, ret);
-		return;
-	}
-
-	gpiod_add_lookup_table(&mmc_gpios_table);
-
-	ret = da8xx_register_mmcsd0(&da830_evm_mmc_config);
-	if (ret) {
-		pr_warn("%s: mmc/sd registration failed: %d\n", __func__, ret);
-		gpiod_remove_lookup_table(&mmc_gpios_table);
-	}
-}
-
-#define HAS_MMC		IS_ENABLED(CONFIG_MMC_DAVINCI)
-
-#ifdef CONFIG_DA830_UI_NAND
-static struct mtd_partition da830_evm_nand_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	[0] = {
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	/* bootloader params in the next sector */
-	[1] = {
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	/* kernel */
-	[2] = {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_2M,
-		.mask_flags	= 0,
-	},
-	/* file system */
-	[3] = {
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-};
-
-/* flash bbt descriptors */
-static uint8_t da830_evm_nand_bbt_pattern[] = { 'B', 'b', 't', '0' };
-static uint8_t da830_evm_nand_mirror_pattern[] = { '1', 't', 'b', 'B' };
-
-static struct nand_bbt_descr da830_evm_nand_bbt_main_descr = {
-	.options	= NAND_BBT_LASTBLOCK | NAND_BBT_CREATE |
-			  NAND_BBT_WRITE | NAND_BBT_2BIT |
-			  NAND_BBT_VERSION | NAND_BBT_PERCHIP,
-	.offs		= 2,
-	.len		= 4,
-	.veroffs	= 16,
-	.maxblocks	= 4,
-	.pattern	= da830_evm_nand_bbt_pattern
-};
-
-static struct nand_bbt_descr da830_evm_nand_bbt_mirror_descr = {
-	.options	= NAND_BBT_LASTBLOCK | NAND_BBT_CREATE |
-			  NAND_BBT_WRITE | NAND_BBT_2BIT |
-			  NAND_BBT_VERSION | NAND_BBT_PERCHIP,
-	.offs		= 2,
-	.len		= 4,
-	.veroffs	= 16,
-	.maxblocks	= 4,
-	.pattern	= da830_evm_nand_mirror_pattern
-};
-
-static struct davinci_aemif_timing da830_evm_nandflash_timing = {
-	.wsetup         = 24,
-	.wstrobe        = 21,
-	.whold          = 14,
-	.rsetup         = 19,
-	.rstrobe        = 50,
-	.rhold          = 0,
-	.ta             = 20,
-};
-
-static struct davinci_nand_pdata da830_evm_nand_pdata = {
-	.core_chipsel	= 1,
-	.parts		= da830_evm_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(da830_evm_nand_partitions),
-	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.ecc_bits	= 4,
-	.bbt_options	= NAND_BBT_USE_FLASH,
-	.bbt_td		= &da830_evm_nand_bbt_main_descr,
-	.bbt_md		= &da830_evm_nand_bbt_mirror_descr,
-	.timing         = &da830_evm_nandflash_timing,
-};
-
-static struct resource da830_evm_nand_resources[] = {
-	[0] = {		/* First memory resource is NAND I/O window */
-		.start	= DA8XX_AEMIF_CS3_BASE,
-		.end	= DA8XX_AEMIF_CS3_BASE + PAGE_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {		/* Second memory resource is AEMIF control registers */
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device da830_evm_aemif_devices[] = {
-	{
-		.name		= "davinci_nand",
-		.id		= 1,
-		.dev		= {
-			.platform_data	= &da830_evm_nand_pdata,
-		},
-		.num_resources	= ARRAY_SIZE(da830_evm_nand_resources),
-		.resource	= da830_evm_nand_resources,
-	},
-};
-
-static struct resource da830_evm_aemif_resource[] = {
-	{
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct aemif_abus_data da830_evm_aemif_abus_data[] = {
-	{
-		.cs	= 3,
-	},
-};
-
-static struct aemif_platform_data da830_evm_aemif_pdata = {
-	.abus_data		= da830_evm_aemif_abus_data,
-	.num_abus_data		= ARRAY_SIZE(da830_evm_aemif_abus_data),
-	.sub_devices		= da830_evm_aemif_devices,
-	.num_sub_devices	= ARRAY_SIZE(da830_evm_aemif_devices),
-	.cs_offset		= 2,
-};
-
-static struct platform_device da830_evm_aemif_device = {
-	.name		= "ti-aemif",
-	.id		= -1,
-	.dev = {
-		.platform_data = &da830_evm_aemif_pdata,
-	},
-	.resource	= da830_evm_aemif_resource,
-	.num_resources	= ARRAY_SIZE(da830_evm_aemif_resource),
-};
-
-/*
- * UI board NAND/NOR flashes only use 8-bit data bus.
- */
-static const short da830_evm_emif25_pins[] = {
-	DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3,
-	DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7,
-	DA830_EMA_A_0, DA830_EMA_A_1, DA830_EMA_A_2, DA830_EMA_A_3,
-	DA830_EMA_A_4, DA830_EMA_A_5, DA830_EMA_A_6, DA830_EMA_A_7,
-	DA830_EMA_A_8, DA830_EMA_A_9, DA830_EMA_A_10, DA830_EMA_A_11,
-	DA830_EMA_A_12, DA830_EMA_BA_0, DA830_EMA_BA_1, DA830_NEMA_WE,
-	DA830_NEMA_CS_2, DA830_NEMA_CS_3, DA830_NEMA_OE, DA830_EMA_WAIT_0,
-	-1
-};
-
-static inline void da830_evm_init_nand(int mux_mode)
-{
-	int ret;
-
-	if (HAS_MMC) {
-		pr_warn("WARNING: both MMC/SD and NAND are enabled, but they share AEMIF pins\n"
-			"\tDisable MMC/SD for NAND support\n");
-		return;
-	}
-
-	ret = davinci_cfg_reg_list(da830_evm_emif25_pins);
-	if (ret)
-		pr_warn("%s: emif25 mux setup failed: %d\n", __func__, ret);
-
-	ret = platform_device_register(&da830_evm_aemif_device);
-	if (ret)
-		pr_warn("%s: AEMIF device not registered\n", __func__);
-
-	gpio_direction_output(mux_mode, 1);
-}
-#else
-static inline void da830_evm_init_nand(int mux_mode) { }
-#endif
-
-#ifdef CONFIG_DA830_UI_LCD
-static inline void da830_evm_init_lcdc(int mux_mode)
-{
-	int ret;
-
-	ret = davinci_cfg_reg_list(da830_lcdcntl_pins);
-	if (ret)
-		pr_warn("%s: lcdcntl mux setup failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_lcdc(&sharp_lcd035q3dg01_pdata);
-	if (ret)
-		pr_warn("%s: lcd setup failed: %d\n", __func__, ret);
-
-	gpio_direction_output(mux_mode, 0);
-}
-#else
-static inline void da830_evm_init_lcdc(int mux_mode) { }
-#endif
-
-static struct nvmem_cell_info da830_evm_nvmem_cells[] = {
-	{
-		.name		= "macaddr",
-		.offset		= 0x7f00,
-		.bytes		= ETH_ALEN,
-	}
-};
-
-static struct nvmem_cell_table da830_evm_nvmem_cell_table = {
-	.nvmem_name	= "1-00500",
-	.cells		= da830_evm_nvmem_cells,
-	.ncells		= ARRAY_SIZE(da830_evm_nvmem_cells),
-};
-
-static struct nvmem_cell_lookup da830_evm_nvmem_cell_lookup = {
-	.nvmem_name	= "1-00500",
-	.cell_name	= "macaddr",
-	.dev_id		= "davinci_emac.1",
-	.con_id		= "mac-address",
-};
-
-static const struct property_entry da830_evm_i2c_eeprom_properties[] = {
-	PROPERTY_ENTRY_U32("pagesize", 64),
-	{ }
-};
-
-static const struct software_node da830_evm_i2c_eeprom_node = {
-	.properties = da830_evm_i2c_eeprom_properties,
-};
-
-static int __init da830_evm_ui_expander_setup(struct i2c_client *client,
-		int gpio, unsigned ngpio, void *context)
-{
-	gpio_request(gpio + 6, "UI MUX_MODE");
-
-	/* Drive mux mode low to match the default without UI card */
-	gpio_direction_output(gpio + 6, 0);
-
-	da830_evm_init_lcdc(gpio + 6);
-
-	da830_evm_init_nand(gpio + 6);
-
-	return 0;
-}
-
-static void da830_evm_ui_expander_teardown(struct i2c_client *client, int gpio,
-		unsigned ngpio, void *context)
-{
-	gpio_free(gpio + 6);
-}
-
-static struct pcf857x_platform_data __initdata da830_evm_ui_expander_info = {
-	.gpio_base	= DAVINCI_N_GPIO,
-	.setup		= da830_evm_ui_expander_setup,
-	.teardown	= da830_evm_ui_expander_teardown,
-};
-
-static struct i2c_board_info __initdata da830_evm_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("24c256", 0x50),
-		.swnode = &da830_evm_i2c_eeprom_node,
-	},
-	{
-		I2C_BOARD_INFO("tlv320aic3x", 0x18),
-	},
-	{
-		I2C_BOARD_INFO("pcf8574", 0x3f),
-		.platform_data	= &da830_evm_ui_expander_info,
-	},
-};
-
-static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = {
-	.bus_freq	= 100,	/* kHz */
-	.bus_delay	= 0,	/* usec */
-};
-
-/*
- * The following EDMA channels/slots are not being used by drivers (for
- * example: Timer, GPIO, UART events etc) on da830/omap-l137 EVM, hence
- * they are being reserved for codecs on the DSP side.
- */
-static const s16 da830_dma_rsv_chans[][2] = {
-	/* (offset, number) */
-	{ 8,  2},
-	{12,  2},
-	{24,  4},
-	{30,  2},
-	{-1, -1}
-};
-
-static const s16 da830_dma_rsv_slots[][2] = {
-	/* (offset, number) */
-	{ 8,  2},
-	{12,  2},
-	{24,  4},
-	{30, 26},
-	{-1, -1}
-};
-
-static struct edma_rsv_info da830_edma_rsv[] = {
-	{
-		.rsv_chans	= da830_dma_rsv_chans,
-		.rsv_slots	= da830_dma_rsv_slots,
-	},
-};
-
-static struct mtd_partition da830evm_spiflash_part[] = {
-	[0] = {
-		.name = "DSP-UBL",
-		.offset = 0,
-		.size = SZ_8K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	[1] = {
-		.name = "ARM-UBL",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_16K + SZ_8K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	[2] = {
-		.name = "U-Boot",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_256K - SZ_32K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	[3] = {
-		.name = "U-Boot-Environment",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_16K,
-		.mask_flags = 0,
-	},
-	[4] = {
-		.name = "Kernel",
-		.offset = MTDPART_OFS_APPEND,
-		.size = MTDPART_SIZ_FULL,
-		.mask_flags = 0,
-	},
-};
-
-static struct flash_platform_data da830evm_spiflash_data = {
-	.name		= "m25p80",
-	.parts		= da830evm_spiflash_part,
-	.nr_parts	= ARRAY_SIZE(da830evm_spiflash_part),
-	.type		= "w25x32",
-};
-
-static struct davinci_spi_config da830evm_spiflash_cfg = {
-	.io_type	= SPI_IO_TYPE_DMA,
-	.c2tdelay	= 8,
-	.t2cdelay	= 8,
-};
-
-static struct spi_board_info da830evm_spi_info[] = {
-	{
-		.modalias		= "m25p80",
-		.platform_data		= &da830evm_spiflash_data,
-		.controller_data	= &da830evm_spiflash_cfg,
-		.mode			= SPI_MODE_0,
-		.max_speed_hz		= 30000000,
-		.bus_num		= 0,
-		.chip_select		= 0,
-	},
-};
-
-static __init void da830_evm_init(void)
-{
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	int ret;
-
-	da830_register_clocks();
-
-	ret = da830_register_gpio();
-	if (ret)
-		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
-	ret = da830_register_edma(da830_edma_rsv);
-	if (ret)
-		pr_warn("%s: edma registration failed: %d\n", __func__, ret);
-
-	ret = davinci_cfg_reg_list(da830_i2c0_pins);
-	if (ret)
-		pr_warn("%s: i2c0 mux setup failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_i2c(0, &da830_evm_i2c_0_pdata);
-	if (ret)
-		pr_warn("%s: i2c0 registration failed: %d\n", __func__, ret);
-
-	da830_evm_usb_init();
-
-	soc_info->emac_pdata->rmii_en = 1;
-	soc_info->emac_pdata->phy_id = DA830_EVM_PHY_ID;
-
-	ret = davinci_cfg_reg_list(da830_cpgmac_pins);
-	if (ret)
-		pr_warn("%s: cpgmac mux setup failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_emac();
-	if (ret)
-		pr_warn("%s: emac registration failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_watchdog();
-	if (ret)
-		pr_warn("%s: watchdog registration failed: %d\n",
-			__func__, ret);
-
-	davinci_serial_init(da8xx_serial_device);
-
-	nvmem_add_cell_table(&da830_evm_nvmem_cell_table);
-	nvmem_add_cell_lookups(&da830_evm_nvmem_cell_lookup, 1);
-
-	i2c_register_board_info(1, da830_evm_i2c_devices,
-			ARRAY_SIZE(da830_evm_i2c_devices));
-
-	ret = davinci_cfg_reg_list(da830_evm_mcasp1_pins);
-	if (ret)
-		pr_warn("%s: mcasp1 mux setup failed: %d\n", __func__, ret);
-
-	da8xx_register_mcasp(1, &da830_evm_snd_data);
-
-	da830_evm_init_mmc();
-
-	ret = da8xx_register_rtc();
-	if (ret)
-		pr_warn("%s: rtc setup failed: %d\n", __func__, ret);
-
-	ret = spi_register_board_info(da830evm_spi_info,
-				      ARRAY_SIZE(da830evm_spi_info));
-	if (ret)
-		pr_warn("%s: spi info registration failed: %d\n",
-			__func__, ret);
-
-	ret = da8xx_register_spi_bus(0, ARRAY_SIZE(da830evm_spi_info));
-	if (ret)
-		pr_warn("%s: spi 0 registration failed: %d\n", __func__, ret);
-
-	regulator_has_full_constraints();
-}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static int __init da830_evm_console_init(void)
-{
-	if (!machine_is_davinci_da830_evm())
-		return 0;
-
-	return add_preferred_console("ttyS", 2, "115200");
-}
-console_initcall(da830_evm_console_init);
-#endif
-
-static void __init da830_evm_map_io(void)
-{
-	da830_init();
-}
-
-MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM")
-	.atag_offset	= 0x100,
-	.map_io		= da830_evm_map_io,
-	.init_irq	= da830_init_irq,
-	.init_time	= da830_init_time,
-	.init_machine	= da830_evm_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
deleted file mode 100644
index d752ee2b30ff..000000000000
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ /dev/null
@@ -1,1550 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * TI DA850/OMAP-L138 EVM board
- *
- * Copyright (C) 2009 Texas Instruments Incorporated - https://www.ti.com/
- *
- * Derived from: arch/arm/mach-davinci/board-da830-evm.c
- * Original Copyrights follow:
- *
- * 2007, 2009 (c) MontaVista Software, Inc.
- */
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio/machine.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/leds.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/input.h>
-#include <linux/input/tps6507x-ts.h>
-#include <linux/mfd/tps6507x.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/nvmem-provider.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
-#include <linux/platform_data/ti-aemif.h>
-#include <linux/platform_data/spi-davinci.h>
-#include <linux/platform_data/uio_pruss.h>
-#include <linux/property.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/tps6507x.h>
-#include <linux/regulator/fixed.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include "common.h"
-#include "da8xx.h"
-#include "mux.h"
-#include "irqs.h"
-#include "sram.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/system_info.h>
-
-#include <media/i2c/tvp514x.h>
-#include <media/i2c/adv7343.h>
-
-#define DA850_EVM_PHY_ID		"davinci_mdio-0:00"
-#define DA850_LCD_PWR_PIN		GPIO_TO_PIN(2, 8)
-#define DA850_LCD_BL_PIN		GPIO_TO_PIN(2, 15)
-
-#define DA850_MII_MDIO_CLKEN_PIN	GPIO_TO_PIN(2, 6)
-
-static struct mtd_partition da850evm_spiflash_part[] = {
-	[0] = {
-		.name = "UBL",
-		.offset = 0,
-		.size = SZ_64K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	[1] = {
-		.name = "U-Boot",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_512K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	[2] = {
-		.name = "U-Boot-Env",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_64K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	[3] = {
-		.name = "Kernel",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_2M + SZ_512K,
-		.mask_flags = 0,
-	},
-	[4] = {
-		.name = "Filesystem",
-		.offset = MTDPART_OFS_APPEND,
-		.size = SZ_4M,
-		.mask_flags = 0,
-	},
-	[5] = {
-		.name = "MAC-Address",
-		.offset = SZ_8M - SZ_64K,
-		.size = SZ_64K,
-		.mask_flags = MTD_WRITEABLE,
-	},
-};
-
-static struct nvmem_cell_info da850evm_nvmem_cells[] = {
-	{
-		.name		= "macaddr",
-		.offset		= 0x0,
-		.bytes		= ETH_ALEN,
-	}
-};
-
-static struct nvmem_cell_table da850evm_nvmem_cell_table = {
-	/*
-	 * The nvmem name differs from the partition name because of the
-	 * internal works of the nvmem framework.
-	 */
-	.nvmem_name	= "MAC-Address0",
-	.cells		= da850evm_nvmem_cells,
-	.ncells		= ARRAY_SIZE(da850evm_nvmem_cells),
-};
-
-static struct nvmem_cell_lookup da850evm_nvmem_cell_lookup = {
-	.nvmem_name	= "MAC-Address0",
-	.cell_name	= "macaddr",
-	.dev_id		= "davinci_emac.1",
-	.con_id		= "mac-address",
-};
-
-static struct flash_platform_data da850evm_spiflash_data = {
-	.name		= "m25p80",
-	.parts		= da850evm_spiflash_part,
-	.nr_parts	= ARRAY_SIZE(da850evm_spiflash_part),
-	.type		= "m25p64",
-};
-
-static struct davinci_spi_config da850evm_spiflash_cfg = {
-	.io_type	= SPI_IO_TYPE_DMA,
-	.c2tdelay	= 8,
-	.t2cdelay	= 8,
-};
-
-static struct spi_board_info da850evm_spi_info[] = {
-	{
-		.modalias		= "m25p80",
-		.platform_data		= &da850evm_spiflash_data,
-		.controller_data	= &da850evm_spiflash_cfg,
-		.mode			= SPI_MODE_0,
-		.max_speed_hz		= 30000000,
-		.bus_num		= 1,
-		.chip_select		= 0,
-	},
-};
-
-static struct mtd_partition da850_evm_norflash_partition[] = {
-	{
-		.name           = "bootloaders + env",
-		.offset         = 0,
-		.size           = SZ_512K,
-		.mask_flags     = MTD_WRITEABLE,
-	},
-	{
-		.name           = "kernel",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = SZ_2M,
-		.mask_flags     = 0,
-	},
-	{
-		.name           = "filesystem",
-		.offset         = MTDPART_OFS_APPEND,
-		.size           = MTDPART_SIZ_FULL,
-		.mask_flags     = 0,
-	},
-};
-
-static struct physmap_flash_data da850_evm_norflash_data = {
-	.width		= 2,
-	.parts		= da850_evm_norflash_partition,
-	.nr_parts	= ARRAY_SIZE(da850_evm_norflash_partition),
-};
-
-static struct resource da850_evm_norflash_resource[] = {
-	{
-		.start	= DA8XX_AEMIF_CS2_BASE,
-		.end	= DA8XX_AEMIF_CS2_BASE + SZ_32M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-/* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash
- * (128K blocks). It may be used instead of the (default) SPI flash
- * to boot, using TI's tools to install the secondary boot loader
- * (UBL) and U-Boot.
- */
-static struct mtd_partition da850_evm_nandflash_partition[] = {
-	{
-		.name		= "u-boot env",
-		.offset		= 0,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	 },
-	{
-		.name		= "UBL",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "u-boot",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 4 * SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "kernel",
-		.offset		= 0x200000,
-		.size		= SZ_2M,
-		.mask_flags	= 0,
-	},
-	{
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	},
-};
-
-static struct davinci_aemif_timing da850_evm_nandflash_timing = {
-	.wsetup		= 24,
-	.wstrobe	= 21,
-	.whold		= 14,
-	.rsetup		= 19,
-	.rstrobe	= 50,
-	.rhold		= 0,
-	.ta		= 20,
-};
-
-static struct davinci_nand_pdata da850_evm_nandflash_data = {
-	.core_chipsel	= 1,
-	.parts		= da850_evm_nandflash_partition,
-	.nr_parts	= ARRAY_SIZE(da850_evm_nandflash_partition),
-	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.ecc_bits	= 4,
-	.bbt_options	= NAND_BBT_USE_FLASH,
-	.timing		= &da850_evm_nandflash_timing,
-};
-
-static struct resource da850_evm_nandflash_resource[] = {
-	{
-		.start	= DA8XX_AEMIF_CS3_BASE,
-		.end	= DA8XX_AEMIF_CS3_BASE + SZ_512K + 2 * SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource da850_evm_aemif_resource[] = {
-	{
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct aemif_abus_data da850_evm_aemif_abus_data[] = {
-	{
-		.cs	= 3,
-	}
-};
-
-static struct platform_device da850_evm_aemif_devices[] = {
-	{
-		.name		= "davinci_nand",
-		.id		= 1,
-		.dev		= {
-			.platform_data	= &da850_evm_nandflash_data,
-		},
-		.num_resources	= ARRAY_SIZE(da850_evm_nandflash_resource),
-		.resource	= da850_evm_nandflash_resource,
-	},
-	{
-		.name		= "physmap-flash",
-		.id		= 0,
-		.dev		= {
-			.platform_data  = &da850_evm_norflash_data,
-		},
-		.num_resources	= 1,
-		.resource	= da850_evm_norflash_resource,
-	}
-};
-
-static struct aemif_platform_data da850_evm_aemif_pdata = {
-	.cs_offset = 2,
-	.abus_data = da850_evm_aemif_abus_data,
-	.num_abus_data = ARRAY_SIZE(da850_evm_aemif_abus_data),
-	.sub_devices = da850_evm_aemif_devices,
-	.num_sub_devices = ARRAY_SIZE(da850_evm_aemif_devices),
-};
-
-static struct platform_device da850_evm_aemif_device = {
-	.name		= "ti-aemif",
-	.id		= -1,
-	.dev = {
-		.platform_data	= &da850_evm_aemif_pdata,
-	},
-	.resource	= da850_evm_aemif_resource,
-	.num_resources	= ARRAY_SIZE(da850_evm_aemif_resource),
-};
-
-static const short da850_evm_nand_pins[] = {
-	DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3,
-	DA850_EMA_D_4, DA850_EMA_D_5, DA850_EMA_D_6, DA850_EMA_D_7,
-	DA850_EMA_A_1, DA850_EMA_A_2, DA850_NEMA_CS_3, DA850_NEMA_CS_4,
-	DA850_NEMA_WE, DA850_NEMA_OE,
-	-1
-};
-
-static const short da850_evm_nor_pins[] = {
-	DA850_EMA_BA_1, DA850_EMA_CLK, DA850_EMA_WAIT_1, DA850_NEMA_CS_2,
-	DA850_NEMA_WE, DA850_NEMA_OE, DA850_EMA_D_0, DA850_EMA_D_1,
-	DA850_EMA_D_2, DA850_EMA_D_3, DA850_EMA_D_4, DA850_EMA_D_5,
-	DA850_EMA_D_6, DA850_EMA_D_7, DA850_EMA_D_8, DA850_EMA_D_9,
-	DA850_EMA_D_10, DA850_EMA_D_11, DA850_EMA_D_12, DA850_EMA_D_13,
-	DA850_EMA_D_14, DA850_EMA_D_15, DA850_EMA_A_0, DA850_EMA_A_1,
-	DA850_EMA_A_2, DA850_EMA_A_3, DA850_EMA_A_4, DA850_EMA_A_5,
-	DA850_EMA_A_6, DA850_EMA_A_7, DA850_EMA_A_8, DA850_EMA_A_9,
-	DA850_EMA_A_10, DA850_EMA_A_11, DA850_EMA_A_12, DA850_EMA_A_13,
-	DA850_EMA_A_14, DA850_EMA_A_15, DA850_EMA_A_16, DA850_EMA_A_17,
-	DA850_EMA_A_18, DA850_EMA_A_19, DA850_EMA_A_20, DA850_EMA_A_21,
-	DA850_EMA_A_22, DA850_EMA_A_23,
-	-1
-};
-
-#define HAS_MMC		IS_ENABLED(CONFIG_MMC_DAVINCI)
-
-static inline void da850_evm_setup_nor_nand(void)
-{
-	int ret = 0;
-
-	if (!HAS_MMC) {
-		ret = davinci_cfg_reg_list(da850_evm_nand_pins);
-		if (ret)
-			pr_warn("%s: NAND mux setup failed: %d\n",
-				__func__, ret);
-
-		ret = davinci_cfg_reg_list(da850_evm_nor_pins);
-		if (ret)
-			pr_warn("%s: NOR mux setup failed: %d\n",
-				__func__, ret);
-
-		ret = platform_device_register(&da850_evm_aemif_device);
-		if (ret)
-			pr_warn("%s: registering aemif failed: %d\n",
-				__func__, ret);
-	}
-}
-
-#ifdef CONFIG_DA850_UI_RMII
-static inline void da850_evm_setup_emac_rmii(int rmii_sel)
-{
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	soc_info->emac_pdata->rmii_en = 1;
-	gpio_set_value_cansleep(rmii_sel, 0);
-}
-#else
-static inline void da850_evm_setup_emac_rmii(int rmii_sel) { }
-#endif
-
-
-#define DA850_KEYS_DEBOUNCE_MS	10
-/*
- * At 200ms polling interval it is possible to miss an
- * event by tapping very lightly on the push button but most
- * pushes do result in an event; longer intervals require the
- * user to hold the button whereas shorter intervals require
- * more CPU time for polling.
- */
-#define DA850_GPIO_KEYS_POLL_MS	200
-
-enum da850_evm_ui_exp_pins {
-	DA850_EVM_UI_EXP_SEL_C = 5,
-	DA850_EVM_UI_EXP_SEL_B,
-	DA850_EVM_UI_EXP_SEL_A,
-	DA850_EVM_UI_EXP_PB8,
-	DA850_EVM_UI_EXP_PB7,
-	DA850_EVM_UI_EXP_PB6,
-	DA850_EVM_UI_EXP_PB5,
-	DA850_EVM_UI_EXP_PB4,
-	DA850_EVM_UI_EXP_PB3,
-	DA850_EVM_UI_EXP_PB2,
-	DA850_EVM_UI_EXP_PB1,
-};
-
-static const char * const da850_evm_ui_exp[] = {
-	[DA850_EVM_UI_EXP_SEL_C]        = "sel_c",
-	[DA850_EVM_UI_EXP_SEL_B]        = "sel_b",
-	[DA850_EVM_UI_EXP_SEL_A]        = "sel_a",
-	[DA850_EVM_UI_EXP_PB8]          = "pb8",
-	[DA850_EVM_UI_EXP_PB7]          = "pb7",
-	[DA850_EVM_UI_EXP_PB6]          = "pb6",
-	[DA850_EVM_UI_EXP_PB5]          = "pb5",
-	[DA850_EVM_UI_EXP_PB4]          = "pb4",
-	[DA850_EVM_UI_EXP_PB3]          = "pb3",
-	[DA850_EVM_UI_EXP_PB2]          = "pb2",
-	[DA850_EVM_UI_EXP_PB1]          = "pb1",
-};
-
-#define DA850_N_UI_PB		8
-
-static struct gpio_keys_button da850_evm_ui_keys[] = {
-	[0 ... DA850_N_UI_PB - 1] = {
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.wakeup			= 0,
-		.debounce_interval	= DA850_KEYS_DEBOUNCE_MS,
-		.code			= -1, /* assigned at runtime */
-		.gpio			= -1, /* assigned at runtime */
-		.desc			= NULL, /* assigned at runtime */
-	},
-};
-
-static struct gpio_keys_platform_data da850_evm_ui_keys_pdata = {
-	.buttons = da850_evm_ui_keys,
-	.nbuttons = ARRAY_SIZE(da850_evm_ui_keys),
-	.poll_interval = DA850_GPIO_KEYS_POLL_MS,
-};
-
-static struct platform_device da850_evm_ui_keys_device = {
-	.name = "gpio-keys-polled",
-	.id = 0,
-	.dev = {
-		.platform_data = &da850_evm_ui_keys_pdata
-	},
-};
-
-static void da850_evm_ui_keys_init(unsigned gpio)
-{
-	int i;
-	struct gpio_keys_button *button;
-
-	for (i = 0; i < DA850_N_UI_PB; i++) {
-		button = &da850_evm_ui_keys[i];
-		button->code = KEY_F8 - i;
-		button->desc = da850_evm_ui_exp[DA850_EVM_UI_EXP_PB8 + i];
-		button->gpio = gpio + DA850_EVM_UI_EXP_PB8 + i;
-	}
-}
-
-#ifdef CONFIG_DA850_UI_SD_VIDEO_PORT
-static inline void da850_evm_setup_video_port(int video_sel)
-{
-	gpio_set_value_cansleep(video_sel, 0);
-}
-#else
-static inline void da850_evm_setup_video_port(int video_sel) { }
-#endif
-
-static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
-						unsigned ngpio, void *c)
-{
-	int sel_a, sel_b, sel_c, ret;
-
-	sel_a = gpio + DA850_EVM_UI_EXP_SEL_A;
-	sel_b = gpio + DA850_EVM_UI_EXP_SEL_B;
-	sel_c = gpio + DA850_EVM_UI_EXP_SEL_C;
-
-	ret = gpio_request(sel_a, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_A]);
-	if (ret) {
-		pr_warn("Cannot open UI expander pin %d\n", sel_a);
-		goto exp_setup_sela_fail;
-	}
-
-	ret = gpio_request(sel_b, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_B]);
-	if (ret) {
-		pr_warn("Cannot open UI expander pin %d\n", sel_b);
-		goto exp_setup_selb_fail;
-	}
-
-	ret = gpio_request(sel_c, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_C]);
-	if (ret) {
-		pr_warn("Cannot open UI expander pin %d\n", sel_c);
-		goto exp_setup_selc_fail;
-	}
-
-	/* deselect all functionalities */
-	gpio_direction_output(sel_a, 1);
-	gpio_direction_output(sel_b, 1);
-	gpio_direction_output(sel_c, 1);
-
-	da850_evm_ui_keys_init(gpio);
-	ret = platform_device_register(&da850_evm_ui_keys_device);
-	if (ret) {
-		pr_warn("Could not register UI GPIO expander push-buttons");
-		goto exp_setup_keys_fail;
-	}
-
-	pr_info("DA850/OMAP-L138 EVM UI card detected\n");
-
-	da850_evm_setup_nor_nand();
-
-	da850_evm_setup_emac_rmii(sel_a);
-
-	da850_evm_setup_video_port(sel_c);
-
-	return 0;
-
-exp_setup_keys_fail:
-	gpio_free(sel_c);
-exp_setup_selc_fail:
-	gpio_free(sel_b);
-exp_setup_selb_fail:
-	gpio_free(sel_a);
-exp_setup_sela_fail:
-	return ret;
-}
-
-static void da850_evm_ui_expander_teardown(struct i2c_client *client,
-					   unsigned gpio, unsigned ngpio, void *c)
-{
-	platform_device_unregister(&da850_evm_ui_keys_device);
-
-	/* deselect all functionalities */
-	gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_C, 1);
-	gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_B, 1);
-	gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_A, 1);
-
-	gpio_free(gpio + DA850_EVM_UI_EXP_SEL_C);
-	gpio_free(gpio + DA850_EVM_UI_EXP_SEL_B);
-	gpio_free(gpio + DA850_EVM_UI_EXP_SEL_A);
-}
-
-/* assign the baseboard expander's GPIOs after the UI board's */
-#define DA850_UI_EXPANDER_N_GPIOS ARRAY_SIZE(da850_evm_ui_exp)
-#define DA850_BB_EXPANDER_GPIO_BASE (DAVINCI_N_GPIO + DA850_UI_EXPANDER_N_GPIOS)
-
-enum da850_evm_bb_exp_pins {
-	DA850_EVM_BB_EXP_DEEP_SLEEP_EN = 0,
-	DA850_EVM_BB_EXP_SW_RST,
-	DA850_EVM_BB_EXP_TP_23,
-	DA850_EVM_BB_EXP_TP_22,
-	DA850_EVM_BB_EXP_TP_21,
-	DA850_EVM_BB_EXP_USER_PB1,
-	DA850_EVM_BB_EXP_USER_LED2,
-	DA850_EVM_BB_EXP_USER_LED1,
-	DA850_EVM_BB_EXP_USER_SW1,
-	DA850_EVM_BB_EXP_USER_SW2,
-	DA850_EVM_BB_EXP_USER_SW3,
-	DA850_EVM_BB_EXP_USER_SW4,
-	DA850_EVM_BB_EXP_USER_SW5,
-	DA850_EVM_BB_EXP_USER_SW6,
-	DA850_EVM_BB_EXP_USER_SW7,
-	DA850_EVM_BB_EXP_USER_SW8
-};
-
-static const char * const da850_evm_bb_exp[] = {
-	[DA850_EVM_BB_EXP_DEEP_SLEEP_EN]	= "deep_sleep_en",
-	[DA850_EVM_BB_EXP_SW_RST]		= "sw_rst",
-	[DA850_EVM_BB_EXP_TP_23]		= "tp_23",
-	[DA850_EVM_BB_EXP_TP_22]		= "tp_22",
-	[DA850_EVM_BB_EXP_TP_21]		= "tp_21",
-	[DA850_EVM_BB_EXP_USER_PB1]		= "user_pb1",
-	[DA850_EVM_BB_EXP_USER_LED2]		= "user_led2",
-	[DA850_EVM_BB_EXP_USER_LED1]		= "user_led1",
-	[DA850_EVM_BB_EXP_USER_SW1]		= "user_sw1",
-	[DA850_EVM_BB_EXP_USER_SW2]		= "user_sw2",
-	[DA850_EVM_BB_EXP_USER_SW3]		= "user_sw3",
-	[DA850_EVM_BB_EXP_USER_SW4]		= "user_sw4",
-	[DA850_EVM_BB_EXP_USER_SW5]		= "user_sw5",
-	[DA850_EVM_BB_EXP_USER_SW6]		= "user_sw6",
-	[DA850_EVM_BB_EXP_USER_SW7]		= "user_sw7",
-	[DA850_EVM_BB_EXP_USER_SW8]		= "user_sw8",
-};
-
-#define DA850_N_BB_USER_SW	8
-
-static struct gpio_keys_button da850_evm_bb_keys[] = {
-	[0] = {
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.wakeup			= 0,
-		.debounce_interval	= DA850_KEYS_DEBOUNCE_MS,
-		.code			= KEY_PROG1,
-		.desc			= NULL, /* assigned at runtime */
-		.gpio			= -1, /* assigned at runtime */
-	},
-	[1 ... DA850_N_BB_USER_SW] = {
-		.type			= EV_SW,
-		.active_low		= 1,
-		.wakeup			= 0,
-		.debounce_interval	= DA850_KEYS_DEBOUNCE_MS,
-		.code			= -1, /* assigned at runtime */
-		.desc			= NULL, /* assigned at runtime */
-		.gpio			= -1, /* assigned at runtime */
-	},
-};
-
-static struct gpio_keys_platform_data da850_evm_bb_keys_pdata = {
-	.buttons = da850_evm_bb_keys,
-	.nbuttons = ARRAY_SIZE(da850_evm_bb_keys),
-	.poll_interval = DA850_GPIO_KEYS_POLL_MS,
-};
-
-static struct platform_device da850_evm_bb_keys_device = {
-	.name = "gpio-keys-polled",
-	.id = 1,
-	.dev = {
-		.platform_data = &da850_evm_bb_keys_pdata
-	},
-};
-
-static void da850_evm_bb_keys_init(unsigned gpio)
-{
-	int i;
-	struct gpio_keys_button *button;
-
-	button = &da850_evm_bb_keys[0];
-	button->desc = da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_PB1];
-	button->gpio = gpio + DA850_EVM_BB_EXP_USER_PB1;
-
-	for (i = 0; i < DA850_N_BB_USER_SW; i++) {
-		button = &da850_evm_bb_keys[i + 1];
-		button->code = SW_LID + i;
-		button->desc = da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_SW1 + i];
-		button->gpio = gpio + DA850_EVM_BB_EXP_USER_SW1 + i;
-	}
-}
-
-static struct gpio_led da850_evm_bb_leds[] = {
-	{
-		.name = "user_led2",
-	},
-	{
-		.name = "user_led1",
-	},
-};
-
-static struct gpio_led_platform_data da850_evm_bb_leds_pdata = {
-	.leds = da850_evm_bb_leds,
-	.num_leds = ARRAY_SIZE(da850_evm_bb_leds),
-};
-
-static struct gpiod_lookup_table da850_evm_bb_leds_gpio_table = {
-	.dev_id = "leds-gpio",
-	.table = {
-		GPIO_LOOKUP_IDX("i2c-bb-expander",
-				DA850_EVM_BB_EXP_USER_LED2, NULL,
-				0, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX("i2c-bb-expander",
-				DA850_EVM_BB_EXP_USER_LED2 + 1, NULL,
-				1, GPIO_ACTIVE_LOW),
-
-		{ },
-	},
-};
-
-static struct platform_device da850_evm_bb_leds_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev = {
-		.platform_data = &da850_evm_bb_leds_pdata
-	}
-};
-
-static int da850_evm_bb_expander_setup(struct i2c_client *client,
-						unsigned gpio, unsigned ngpio,
-						void *c)
-{
-	int ret;
-
-	/*
-	 * Register the switches and pushbutton on the baseboard as a gpio-keys
-	 * device.
-	 */
-	da850_evm_bb_keys_init(gpio);
-	ret = platform_device_register(&da850_evm_bb_keys_device);
-	if (ret) {
-		pr_warn("Could not register baseboard GPIO expander keys");
-		goto io_exp_setup_sw_fail;
-	}
-
-	gpiod_add_lookup_table(&da850_evm_bb_leds_gpio_table);
-	ret = platform_device_register(&da850_evm_bb_leds_device);
-	if (ret) {
-		pr_warn("Could not register baseboard GPIO expander LEDs");
-		goto io_exp_setup_leds_fail;
-	}
-
-	return 0;
-
-io_exp_setup_leds_fail:
-	platform_device_unregister(&da850_evm_bb_keys_device);
-io_exp_setup_sw_fail:
-	return ret;
-}
-
-static void da850_evm_bb_expander_teardown(struct i2c_client *client,
-					   unsigned gpio, unsigned ngpio, void *c)
-{
-	platform_device_unregister(&da850_evm_bb_leds_device);
-	platform_device_unregister(&da850_evm_bb_keys_device);
-}
-
-static struct pca953x_platform_data da850_evm_ui_expander_info = {
-	.gpio_base	= DAVINCI_N_GPIO,
-	.setup		= da850_evm_ui_expander_setup,
-	.teardown	= da850_evm_ui_expander_teardown,
-	.names		= da850_evm_ui_exp,
-};
-
-static struct pca953x_platform_data da850_evm_bb_expander_info = {
-	.gpio_base	= DA850_BB_EXPANDER_GPIO_BASE,
-	.setup		= da850_evm_bb_expander_setup,
-	.teardown	= da850_evm_bb_expander_teardown,
-	.names		= da850_evm_bb_exp,
-};
-
-static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("tlv320aic3x", 0x18),
-	},
-	{
-		I2C_BOARD_INFO("tca6416", 0x20),
-		.dev_name = "ui-expander",
-		.platform_data = &da850_evm_ui_expander_info,
-	},
-	{
-		I2C_BOARD_INFO("tca6416", 0x21),
-		.dev_name = "bb-expander",
-		.platform_data = &da850_evm_bb_expander_info,
-	},
-};
-
-static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
-	.bus_freq	= 100,	/* kHz */
-	.bus_delay	= 0,	/* usec */
-};
-
-/* davinci da850 evm audio machine driver */
-static u8 da850_iis_serializer_direction[] = {
-	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
-	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
-	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	TX_MODE,
-	RX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
-};
-
-static struct snd_platform_data da850_evm_snd_data = {
-	.tx_dma_offset		= 0x2000,
-	.rx_dma_offset		= 0x2000,
-	.op_mode		= DAVINCI_MCASP_IIS_MODE,
-	.num_serializer		= ARRAY_SIZE(da850_iis_serializer_direction),
-	.tdm_slots		= 2,
-	.serial_dir		= da850_iis_serializer_direction,
-	.asp_chan_q		= EVENTQ_0,
-	.ram_chan_q		= EVENTQ_1,
-	.version		= MCASP_VERSION_2,
-	.txnumevt		= 1,
-	.rxnumevt		= 1,
-	.sram_size_playback	= SZ_8K,
-	.sram_size_capture	= SZ_8K,
-};
-
-static const short da850_evm_mcasp_pins[] __initconst = {
-	DA850_AHCLKX, DA850_ACLKX, DA850_AFSX,
-	DA850_AHCLKR, DA850_ACLKR, DA850_AFSR, DA850_AMUTE,
-	DA850_AXR_11, DA850_AXR_12,
-	-1
-};
-
-#define DA850_MMCSD_CD_PIN		GPIO_TO_PIN(4, 0)
-#define DA850_MMCSD_WP_PIN		GPIO_TO_PIN(4, 1)
-
-static struct gpiod_lookup_table mmc_gpios_table = {
-	.dev_id = "da830-mmc.0",
-	.table = {
-		/* gpio chip 2 contains gpio range 64-95 */
-		GPIO_LOOKUP("davinci_gpio", DA850_MMCSD_CD_PIN, "cd",
-			    GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("davinci_gpio", DA850_MMCSD_WP_PIN, "wp",
-			    GPIO_ACTIVE_HIGH),
-		{ }
-	},
-};
-
-static struct davinci_mmc_config da850_mmc_config = {
-	.wires		= 4,
-	.max_freq	= 50000000,
-	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-static const short da850_evm_mmcsd0_pins[] __initconst = {
-	DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2,
-	DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD,
-	DA850_GPIO4_0, DA850_GPIO4_1,
-	-1
-};
-
-static struct property_entry da850_lcd_backlight_props[] = {
-	PROPERTY_ENTRY_BOOL("default-on"),
-	{ }
-};
-
-static struct gpiod_lookup_table da850_lcd_backlight_gpio_table = {
-	.dev_id		= "gpio-backlight",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", DA850_LCD_BL_PIN, NULL, 0),
-		{ }
-	},
-};
-
-static const struct platform_device_info da850_lcd_backlight_info = {
-	.name		= "gpio-backlight",
-	.id		= PLATFORM_DEVID_NONE,
-	.properties	= da850_lcd_backlight_props,
-};
-
-static struct regulator_consumer_supply da850_lcd_supplies[] = {
-	REGULATOR_SUPPLY("lcd", NULL),
-};
-
-static struct regulator_init_data da850_lcd_supply_data = {
-	.consumer_supplies	= da850_lcd_supplies,
-	.num_consumer_supplies	= ARRAY_SIZE(da850_lcd_supplies),
-	.constraints    = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct fixed_voltage_config da850_lcd_supply = {
-	.supply_name		= "lcd",
-	.microvolts		= 33000000,
-	.init_data		= &da850_lcd_supply_data,
-};
-
-static struct platform_device da850_lcd_supply_device = {
-	.name			= "reg-fixed-voltage",
-	.id			= 1, /* Dummy fixed regulator is 0 */
-	.dev			= {
-		.platform_data = &da850_lcd_supply,
-	},
-};
-
-static struct gpiod_lookup_table da850_lcd_supply_gpio_table = {
-	.dev_id			= "reg-fixed-voltage.1",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", DA850_LCD_PWR_PIN, NULL, 0),
-		{ }
-	},
-};
-
-static struct gpiod_lookup_table *da850_lcd_gpio_lookups[] = {
-	&da850_lcd_backlight_gpio_table,
-	&da850_lcd_supply_gpio_table,
-};
-
-static int da850_lcd_hw_init(void)
-{
-	struct platform_device *backlight;
-	int status;
-
-	gpiod_add_lookup_tables(da850_lcd_gpio_lookups,
-				ARRAY_SIZE(da850_lcd_gpio_lookups));
-
-	backlight = platform_device_register_full(&da850_lcd_backlight_info);
-	if (IS_ERR(backlight))
-		return PTR_ERR(backlight);
-
-	status = platform_device_register(&da850_lcd_supply_device);
-	if (status)
-		return status;
-
-	return 0;
-}
-
-/* Fixed regulator support */
-static struct regulator_consumer_supply fixed_supplies[] = {
-	/* Baseboard 3.3V: 5V -> TPS73701DCQ -> 3.3V */
-	REGULATOR_SUPPLY("AVDD", "1-0018"),
-	REGULATOR_SUPPLY("DRVDD", "1-0018"),
-
-	/* Baseboard 1.8V: 5V -> TPS73701DCQ -> 1.8V */
-	REGULATOR_SUPPLY("DVDD", "1-0018"),
-
-	/* UI card 3.3V: 5V -> TPS73701DCQ -> 3.3V */
-	REGULATOR_SUPPLY("vcc", "1-0020"),
-};
-
-/* TPS65070 voltage regulator support */
-
-/* 3.3V */
-static struct regulator_consumer_supply tps65070_dcdc1_consumers[] = {
-	{
-		.supply = "usb0_vdda33",
-	},
-	{
-		.supply = "usb1_vdda33",
-	},
-};
-
-/* 3.3V or 1.8V */
-static struct regulator_consumer_supply tps65070_dcdc2_consumers[] = {
-	{
-		.supply = "dvdd3318_a",
-	},
-	{
-		.supply = "dvdd3318_b",
-	},
-	{
-		.supply = "dvdd3318_c",
-	},
-	REGULATOR_SUPPLY("IOVDD", "1-0018"),
-};
-
-/* 1.2V */
-static struct regulator_consumer_supply tps65070_dcdc3_consumers[] = {
-	{
-		.supply = "cvdd",
-	},
-};
-
-/* 1.8V LDO */
-static struct regulator_consumer_supply tps65070_ldo1_consumers[] = {
-	{
-		.supply = "sata_vddr",
-	},
-	{
-		.supply = "usb0_vdda18",
-	},
-	{
-		.supply = "usb1_vdda18",
-	},
-	{
-		.supply = "ddr_dvdd18",
-	},
-};
-
-/* 1.2V LDO */
-static struct regulator_consumer_supply tps65070_ldo2_consumers[] = {
-	{
-		.supply = "sata_vdd",
-	},
-	{
-		.supply = "pll0_vdda",
-	},
-	{
-		.supply = "pll1_vdda",
-	},
-	{
-		.supply = "usbs_cvdd",
-	},
-	{
-		.supply = "vddarnwa1",
-	},
-};
-
-/* We take advantage of the fact that both defdcdc{2,3} are tied high */
-static struct tps6507x_reg_platform_data tps6507x_platform_data = {
-	.defdcdc_default = true,
-};
-
-static struct regulator_init_data tps65070_regulator_data[] = {
-	/* dcdc1 */
-	{
-		.constraints = {
-			.min_uV = 3150000,
-			.max_uV = 3450000,
-			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS),
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc1_consumers),
-		.consumer_supplies = tps65070_dcdc1_consumers,
-	},
-
-	/* dcdc2 */
-	{
-		.constraints = {
-			.min_uV = 1710000,
-			.max_uV = 3450000,
-			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS),
-			.boot_on = 1,
-			.always_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc2_consumers),
-		.consumer_supplies = tps65070_dcdc2_consumers,
-		.driver_data = &tps6507x_platform_data,
-	},
-
-	/* dcdc3 */
-	{
-		.constraints = {
-			.min_uV = 950000,
-			.max_uV = 1350000,
-			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS),
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc3_consumers),
-		.consumer_supplies = tps65070_dcdc3_consumers,
-		.driver_data = &tps6507x_platform_data,
-	},
-
-	/* ldo1 */
-	{
-		.constraints = {
-			.min_uV = 1710000,
-			.max_uV = 1890000,
-			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS),
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65070_ldo1_consumers),
-		.consumer_supplies = tps65070_ldo1_consumers,
-	},
-
-	/* ldo2 */
-	{
-		.constraints = {
-			.min_uV = 1140000,
-			.max_uV = 1320000,
-			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS),
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65070_ldo2_consumers),
-		.consumer_supplies = tps65070_ldo2_consumers,
-	},
-};
-
-static struct touchscreen_init_data tps6507x_touchscreen_data = {
-	.poll_period =  30,	/* ms between touch samples */
-	.min_pressure = 0x30,	/* minimum pressure to trigger touch */
-	.vendor = 0,		/* /sys/class/input/input?/id/vendor */
-	.product = 65070,	/* /sys/class/input/input?/id/product */
-	.version = 0x100,	/* /sys/class/input/input?/id/version */
-};
-
-static struct tps6507x_board tps_board = {
-	.tps6507x_pmic_init_data = &tps65070_regulator_data[0],
-	.tps6507x_ts_init_data = &tps6507x_touchscreen_data,
-};
-
-static struct i2c_board_info __initdata da850_evm_tps65070_info[] = {
-	{
-		I2C_BOARD_INFO("tps6507x", 0x48),
-		.platform_data = &tps_board,
-	},
-};
-
-static int __init pmic_tps65070_init(void)
-{
-	return i2c_register_board_info(1, da850_evm_tps65070_info,
-					ARRAY_SIZE(da850_evm_tps65070_info));
-}
-
-static const short da850_evm_lcdc_pins[] = {
-	DA850_GPIO2_8, DA850_GPIO2_15,
-	-1
-};
-
-static const short da850_evm_mii_pins[] = {
-	DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
-	DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
-	DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
-	DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
-	DA850_MDIO_D,
-	-1
-};
-
-static const short da850_evm_rmii_pins[] = {
-	DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN,
-	DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1,
-	DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK,
-	DA850_MDIO_D,
-	-1
-};
-
-static struct gpiod_hog da850_evm_emac_gpio_hogs[] = {
-	{
-		.chip_label	= "davinci_gpio",
-		.chip_hwnum	= DA850_MII_MDIO_CLKEN_PIN,
-		.line_name	= "mdio_clk_en",
-		.lflags		= 0,
-		/* dflags set in da850_evm_config_emac() */
-	},
-	{ }
-};
-
-static int __init da850_evm_config_emac(void)
-{
-	void __iomem *cfg_chip3_base;
-	int ret;
-	u32 val;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	u8 rmii_en;
-
-	if (!machine_is_davinci_da850_evm())
-		return 0;
-
-	rmii_en = soc_info->emac_pdata->rmii_en;
-
-	cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
-
-	val = __raw_readl(cfg_chip3_base);
-
-	if (rmii_en) {
-		val |= BIT(8);
-		ret = davinci_cfg_reg_list(da850_evm_rmii_pins);
-		pr_info("EMAC: RMII PHY configured, MII PHY will not be"
-							" functional\n");
-	} else {
-		val &= ~BIT(8);
-		ret = davinci_cfg_reg_list(da850_evm_mii_pins);
-		pr_info("EMAC: MII PHY configured, RMII PHY will not be"
-							" functional\n");
-	}
-
-	if (ret)
-		pr_warn("%s: CPGMAC/RMII mux setup failed: %d\n",
-			__func__, ret);
-
-	/* configure the CFGCHIP3 register for RMII or MII */
-	__raw_writel(val, cfg_chip3_base);
-
-	ret = davinci_cfg_reg(DA850_GPIO2_6);
-	if (ret)
-		pr_warn("%s:GPIO(2,6) mux setup failed\n", __func__);
-
-	da850_evm_emac_gpio_hogs[0].dflags = rmii_en ? GPIOD_OUT_HIGH
-						     : GPIOD_OUT_LOW;
-	gpiod_add_hogs(da850_evm_emac_gpio_hogs);
-
-	soc_info->emac_pdata->phy_id = DA850_EVM_PHY_ID;
-
-	ret = da8xx_register_emac();
-	if (ret)
-		pr_warn("%s: EMAC registration failed: %d\n", __func__, ret);
-
-	return 0;
-}
-device_initcall(da850_evm_config_emac);
-
-/*
- * The following EDMA channels/slots are not being used by drivers (for
- * example: Timer, GPIO, UART events etc) on da850/omap-l138 EVM, hence
- * they are being reserved for codecs on the DSP side.
- */
-static const s16 da850_dma0_rsv_chans[][2] = {
-	/* (offset, number) */
-	{ 8,  6},
-	{24,  4},
-	{30,  2},
-	{-1, -1}
-};
-
-static const s16 da850_dma0_rsv_slots[][2] = {
-	/* (offset, number) */
-	{ 8,  6},
-	{24,  4},
-	{30, 50},
-	{-1, -1}
-};
-
-static const s16 da850_dma1_rsv_chans[][2] = {
-	/* (offset, number) */
-	{ 0, 28},
-	{30,  2},
-	{-1, -1}
-};
-
-static const s16 da850_dma1_rsv_slots[][2] = {
-	/* (offset, number) */
-	{ 0, 28},
-	{30, 90},
-	{-1, -1}
-};
-
-static struct edma_rsv_info da850_edma_cc0_rsv = {
-	.rsv_chans	= da850_dma0_rsv_chans,
-	.rsv_slots	= da850_dma0_rsv_slots,
-};
-
-static struct edma_rsv_info da850_edma_cc1_rsv = {
-	.rsv_chans	= da850_dma1_rsv_chans,
-	.rsv_slots	= da850_dma1_rsv_slots,
-};
-
-static struct edma_rsv_info *da850_edma_rsv[2] = {
-	&da850_edma_cc0_rsv,
-	&da850_edma_cc1_rsv,
-};
-
-#ifdef CONFIG_CPU_FREQ
-static __init int da850_evm_init_cpufreq(void)
-{
-	switch (system_rev & 0xF) {
-	case 3:
-		da850_max_speed = 456000;
-		break;
-	case 2:
-		da850_max_speed = 408000;
-		break;
-	case 1:
-		da850_max_speed = 372000;
-		break;
-	}
-
-	return da850_register_cpufreq("pll0_sysclk3");
-}
-#else
-static __init int da850_evm_init_cpufreq(void) { return 0; }
-#endif
-
-#if defined(CONFIG_DA850_UI_SD_VIDEO_PORT)
-
-#define TVP5147_CH0		"tvp514x-0"
-#define TVP5147_CH1		"tvp514x-1"
-
-/* VPIF capture configuration */
-static struct tvp514x_platform_data tvp5146_pdata = {
-		.clk_polarity = 0,
-		.hs_polarity  = 1,
-		.vs_polarity  = 1,
-};
-
-#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
-
-static struct vpif_input da850_ch0_inputs[] = {
-	{
-		.input = {
-			.index = 0,
-			.name  = "Composite",
-			.type  = V4L2_INPUT_TYPE_CAMERA,
-			.capabilities = V4L2_IN_CAP_STD,
-			.std   = TVP514X_STD_ALL,
-		},
-		.input_route = INPUT_CVBS_VI2B,
-		.output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-		.subdev_name = TVP5147_CH0,
-	},
-};
-
-static struct vpif_input da850_ch1_inputs[] = {
-	{
-		.input = {
-			.index = 0,
-			.name  = "S-Video",
-			.type  = V4L2_INPUT_TYPE_CAMERA,
-			.capabilities = V4L2_IN_CAP_STD,
-			.std   = TVP514X_STD_ALL,
-		},
-		.input_route = INPUT_SVIDEO_VI2C_VI1C,
-		.output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-		.subdev_name = TVP5147_CH1,
-	},
-};
-
-static struct vpif_subdev_info da850_vpif_capture_sdev_info[] = {
-	{
-		.name = TVP5147_CH0,
-		.board_info = {
-			I2C_BOARD_INFO("tvp5146", 0x5d),
-			.platform_data = &tvp5146_pdata,
-		},
-	},
-	{
-		.name = TVP5147_CH1,
-		.board_info = {
-			I2C_BOARD_INFO("tvp5146", 0x5c),
-			.platform_data = &tvp5146_pdata,
-		},
-	},
-};
-
-static struct vpif_capture_config da850_vpif_capture_config = {
-	.subdev_info = da850_vpif_capture_sdev_info,
-	.subdev_count = ARRAY_SIZE(da850_vpif_capture_sdev_info),
-	.i2c_adapter_id = 1,
-	.chan_config[0] = {
-		.inputs = da850_ch0_inputs,
-		.input_count = ARRAY_SIZE(da850_ch0_inputs),
-		.vpif_if = {
-			.if_type = VPIF_IF_BT656,
-			.hd_pol  = 1,
-			.vd_pol  = 1,
-			.fid_pol = 0,
-		},
-	},
-	.chan_config[1] = {
-		.inputs = da850_ch1_inputs,
-		.input_count = ARRAY_SIZE(da850_ch1_inputs),
-		.vpif_if = {
-			.if_type = VPIF_IF_BT656,
-			.hd_pol  = 1,
-			.vd_pol  = 1,
-			.fid_pol = 0,
-		},
-	},
-	.card_name = "DA850/OMAP-L138 Video Capture",
-};
-
-/* VPIF display configuration */
-
-static struct adv7343_platform_data adv7343_pdata = {
-	.mode_config = {
-		.dac = { 1, 1, 1 },
-	},
-	.sd_config = {
-		.sd_dac_out = { 1 },
-	},
-};
-
-static struct vpif_subdev_info da850_vpif_subdev[] = {
-	{
-		.name = "adv7343",
-		.board_info = {
-			I2C_BOARD_INFO("adv7343", 0x2a),
-			.platform_data = &adv7343_pdata,
-		},
-	},
-};
-
-static const struct vpif_output da850_ch0_outputs[] = {
-	{
-		.output = {
-			.index = 0,
-			.name = "Composite",
-			.type = V4L2_OUTPUT_TYPE_ANALOG,
-			.capabilities = V4L2_OUT_CAP_STD,
-			.std = V4L2_STD_ALL,
-		},
-		.subdev_name = "adv7343",
-		.output_route = ADV7343_COMPOSITE_ID,
-	},
-	{
-		.output = {
-			.index = 1,
-			.name = "S-Video",
-			.type = V4L2_OUTPUT_TYPE_ANALOG,
-			.capabilities = V4L2_OUT_CAP_STD,
-			.std = V4L2_STD_ALL,
-		},
-		.subdev_name = "adv7343",
-		.output_route = ADV7343_SVIDEO_ID,
-	},
-};
-
-static struct vpif_display_config da850_vpif_display_config = {
-	.subdevinfo   = da850_vpif_subdev,
-	.subdev_count = ARRAY_SIZE(da850_vpif_subdev),
-	.chan_config[0] = {
-		.outputs = da850_ch0_outputs,
-		.output_count = ARRAY_SIZE(da850_ch0_outputs),
-	},
-	.card_name    = "DA850/OMAP-L138 Video Display",
-	.i2c_adapter_id = 1,
-};
-
-static __init void da850_vpif_init(void)
-{
-	int ret;
-
-	ret = da850_register_vpif();
-	if (ret)
-		pr_warn("da850_evm_init: VPIF setup failed: %d\n", ret);
-
-	ret = davinci_cfg_reg_list(da850_vpif_capture_pins);
-	if (ret)
-		pr_warn("da850_evm_init: VPIF capture mux setup failed: %d\n",
-			ret);
-
-	ret = da850_register_vpif_capture(&da850_vpif_capture_config);
-	if (ret)
-		pr_warn("da850_evm_init: VPIF capture setup failed: %d\n", ret);
-
-	ret = davinci_cfg_reg_list(da850_vpif_display_pins);
-	if (ret)
-		pr_warn("da850_evm_init: VPIF display mux setup failed: %d\n",
-			ret);
-
-	ret = da850_register_vpif_display(&da850_vpif_display_config);
-	if (ret)
-		pr_warn("da850_evm_init: VPIF display setup failed: %d\n", ret);
-}
-
-#else
-static __init void da850_vpif_init(void) {}
-#endif
-
-#define DA850EVM_SATA_REFCLKPN_RATE	(100 * 1000 * 1000)
-
-static __init void da850_evm_init(void)
-{
-	int ret;
-
-	da850_register_clocks();
-
-	ret = da850_register_gpio();
-	if (ret)
-		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
-	regulator_register_fixed(0, fixed_supplies, ARRAY_SIZE(fixed_supplies));
-
-	ret = pmic_tps65070_init();
-	if (ret)
-		pr_warn("%s: TPS65070 PMIC init failed: %d\n", __func__, ret);
-
-	ret = da850_register_edma(da850_edma_rsv);
-	if (ret)
-		pr_warn("%s: EDMA registration failed: %d\n", __func__, ret);
-
-	ret = davinci_cfg_reg_list(da850_i2c0_pins);
-	if (ret)
-		pr_warn("%s: I2C0 mux setup failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_i2c(0, &da850_evm_i2c_0_pdata);
-	if (ret)
-		pr_warn("%s: I2C0 registration failed: %d\n", __func__, ret);
-
-
-	ret = da8xx_register_watchdog();
-	if (ret)
-		pr_warn("%s: watchdog registration failed: %d\n",
-			__func__, ret);
-
-	if (HAS_MMC) {
-		ret = davinci_cfg_reg_list(da850_evm_mmcsd0_pins);
-		if (ret)
-			pr_warn("%s: MMCSD0 mux setup failed: %d\n",
-				__func__, ret);
-
-		gpiod_add_lookup_table(&mmc_gpios_table);
-
-		ret = da8xx_register_mmcsd0(&da850_mmc_config);
-		if (ret)
-			pr_warn("%s: MMCSD0 registration failed: %d\n",
-				__func__, ret);
-	}
-
-	davinci_serial_init(da8xx_serial_device);
-
-	nvmem_add_cell_table(&da850evm_nvmem_cell_table);
-	nvmem_add_cell_lookups(&da850evm_nvmem_cell_lookup, 1);
-
-	i2c_register_board_info(1, da850_evm_i2c_devices,
-			ARRAY_SIZE(da850_evm_i2c_devices));
-
-	/*
-	 * shut down uart 0 and 1; they are not used on the board and
-	 * accessing them causes endless "too much work in irq53" messages
-	 * with arago fs
-	 */
-	__raw_writel(0, IO_ADDRESS(DA8XX_UART1_BASE) + 0x30);
-	__raw_writel(0, IO_ADDRESS(DA8XX_UART0_BASE) + 0x30);
-
-	ret = davinci_cfg_reg_list(da850_evm_mcasp_pins);
-	if (ret)
-		pr_warn("%s: McASP mux setup failed: %d\n", __func__, ret);
-
-	da850_evm_snd_data.sram_pool = sram_get_gen_pool();
-	da8xx_register_mcasp(0, &da850_evm_snd_data);
-
-	ret = davinci_cfg_reg_list(da850_lcdcntl_pins);
-	if (ret)
-		pr_warn("%s: LCDC mux setup failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_uio_pruss();
-	if (ret)
-		pr_warn("da850_evm_init: pruss initialization failed: %d\n",
-				ret);
-
-	/* Handle board specific muxing for LCD here */
-	ret = davinci_cfg_reg_list(da850_evm_lcdc_pins);
-	if (ret)
-		pr_warn("%s: EVM specific LCD mux setup failed: %d\n",
-			__func__, ret);
-
-	ret = da850_lcd_hw_init();
-	if (ret)
-		pr_warn("%s: LCD initialization failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata);
-	if (ret)
-		pr_warn("%s: LCDC registration failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_rtc();
-	if (ret)
-		pr_warn("%s: RTC setup failed: %d\n", __func__, ret);
-
-	ret = da850_evm_init_cpufreq();
-	if (ret)
-		pr_warn("%s: cpufreq registration failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_cpuidle();
-	if (ret)
-		pr_warn("%s: cpuidle registration failed: %d\n", __func__, ret);
-
-	davinci_pm_init();
-	da850_vpif_init();
-
-	ret = spi_register_board_info(da850evm_spi_info,
-				      ARRAY_SIZE(da850evm_spi_info));
-	if (ret)
-		pr_warn("%s: spi info registration failed: %d\n", __func__,
-			ret);
-
-	ret = da8xx_register_spi_bus(1, ARRAY_SIZE(da850evm_spi_info));
-	if (ret)
-		pr_warn("%s: SPI 1 registration failed: %d\n", __func__, ret);
-
-	ret = da850_register_sata(DA850EVM_SATA_REFCLKPN_RATE);
-	if (ret)
-		pr_warn("%s: SATA registration failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_rproc();
-	if (ret)
-		pr_warn("%s: dsp/rproc registration failed: %d\n",
-			__func__, ret);
-
-	regulator_has_full_constraints();
-}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static int __init da850_evm_console_init(void)
-{
-	if (!machine_is_davinci_da850_evm())
-		return 0;
-
-	return add_preferred_console("ttyS", 2, "115200");
-}
-console_initcall(da850_evm_console_init);
-#endif
-
-static void __init da850_evm_map_io(void)
-{
-	da850_init();
-}
-
-MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
-	.atag_offset	= 0x100,
-	.map_io		= da850_evm_map_io,
-	.init_irq	= da850_init_irq,
-	.init_time	= da850_init_time,
-	.init_machine	= da850_evm_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-	.reserve	= da8xx_rproc_reserve_cma,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
deleted file mode 100644
index b48ab1c3e48b..000000000000
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ /dev/null
@@ -1,444 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * TI DaVinci EVM board support
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) MontaVista Software, Inc.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/clk.h>
-#include <linux/dm9000.h>
-#include <linux/videodev2.h>
-#include <media/i2c/tvp514x.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "serial.h"
-#include "common.h"
-#include "davinci.h"
-
-/* NOTE:  this is geared for the standard config, with a socketed
- * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
- * swap chips, maybe with a different block size, partitioning may
- * need to be changed.
- */
-#define NAND_BLOCK_SIZE		SZ_128K
-
-static struct mtd_partition davinci_nand_partitions[] = {
-	{
-		/* UBL (a few copies) plus U-Boot */
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= 15 * NAND_BLOCK_SIZE,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	}, {
-		/* U-Boot environment */
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 1 * NAND_BLOCK_SIZE,
-		.mask_flags	= 0,
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_4M,
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem1",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_512M,
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem2",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-	/* two blocks with bad block table (and mirror) at the end */
-};
-
-static struct davinci_nand_pdata davinci_nand_data = {
-	.core_chipsel		= 0,
-	.mask_chipsel		= BIT(14),
-	.parts			= davinci_nand_partitions,
-	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
-	.engine_type		= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.bbt_options		= NAND_BBT_USE_FLASH,
-	.ecc_bits		= 4,
-};
-
-static struct resource davinci_nand_resources[] = {
-	{
-		.start		= DM355_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DM355_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= DM355_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DM355_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device davinci_nand_device = {
-	.name			= "davinci_nand",
-	.id			= 0,
-
-	.num_resources		= ARRAY_SIZE(davinci_nand_resources),
-	.resource		= davinci_nand_resources,
-
-	.dev			= {
-		.platform_data	= &davinci_nand_data,
-	},
-};
-
-#define DM355_I2C_SDA_PIN	GPIO_TO_PIN(0, 15)
-#define DM355_I2C_SCL_PIN	GPIO_TO_PIN(0, 14)
-
-static struct gpiod_lookup_table i2c_recovery_gpiod_table = {
-	.dev_id = "i2c_davinci.1",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", DM355_I2C_SDA_PIN, "sda",
-			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		GPIO_LOOKUP("davinci_gpio", DM355_I2C_SCL_PIN, "scl",
-			    GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		{ }
-	},
-};
-
-static struct davinci_i2c_platform_data i2c_pdata = {
-	.bus_freq	= 400	/* kHz */,
-	.bus_delay	= 0	/* usec */,
-	.gpio_recovery	= true,
-};
-
-static int dm355evm_mmc_gpios = -EINVAL;
-
-static void dm355evm_mmcsd_gpios(unsigned gpio)
-{
-	gpio_request(gpio + 0, "mmc0_ro");
-	gpio_request(gpio + 1, "mmc0_cd");
-	gpio_request(gpio + 2, "mmc1_ro");
-	gpio_request(gpio + 3, "mmc1_cd");
-
-	/* we "know" these are input-only so we don't
-	 * need to call gpio_direction_input()
-	 */
-
-	dm355evm_mmc_gpios = gpio;
-}
-
-static struct i2c_board_info dm355evm_i2c_info[] = {
-	{	I2C_BOARD_INFO("dm355evm_msp", 0x25),
-		.platform_data = dm355evm_mmcsd_gpios,
-	},
-	/* { plus irq  }, */
-	{ I2C_BOARD_INFO("tlv320aic33", 0x1b), },
-};
-
-static void __init evm_init_i2c(void)
-{
-	gpiod_add_lookup_table(&i2c_recovery_gpiod_table);
-	davinci_init_i2c(&i2c_pdata);
-
-	gpio_request(5, "dm355evm_msp");
-	gpio_direction_input(5);
-	dm355evm_i2c_info[0].irq = gpio_to_irq(5);
-
-	i2c_register_board_info(1, dm355evm_i2c_info,
-			ARRAY_SIZE(dm355evm_i2c_info));
-}
-
-static struct resource dm355evm_dm9000_rsrc[] = {
-	{
-		/* addr */
-		.start	= 0x04014000,
-		.end	= 0x04014001,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		/* data */
-		.start	= 0x04014002,
-		.end	= 0x04014003,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.flags	= IORESOURCE_IRQ
-			| IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */,
-	},
-};
-
-static struct dm9000_plat_data dm335evm_dm9000_platdata;
-
-static struct platform_device dm355evm_dm9000 = {
-	.name		= "dm9000",
-	.id		= -1,
-	.resource	= dm355evm_dm9000_rsrc,
-	.num_resources	= ARRAY_SIZE(dm355evm_dm9000_rsrc),
-	.dev		= {
-		.platform_data = &dm335evm_dm9000_platdata,
-	},
-};
-
-static struct tvp514x_platform_data tvp5146_pdata = {
-	.clk_polarity = 0,
-	.hs_polarity = 1,
-	.vs_polarity = 1
-};
-
-#define TVP514X_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
-/* Inputs available at the TVP5146 */
-static struct v4l2_input tvp5146_inputs[] = {
-	{
-		.index = 0,
-		.name = "Composite",
-		.type = V4L2_INPUT_TYPE_CAMERA,
-		.std = TVP514X_STD_ALL,
-	},
-	{
-		.index = 1,
-		.name = "S-Video",
-		.type = V4L2_INPUT_TYPE_CAMERA,
-		.std = TVP514X_STD_ALL,
-	},
-};
-
-/*
- * this is the route info for connecting each input to decoder
- * ouput that goes to vpfe. There is a one to one correspondence
- * with tvp5146_inputs
- */
-static struct vpfe_route tvp5146_routes[] = {
-	{
-		.input = INPUT_CVBS_VI2B,
-		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-	},
-	{
-		.input = INPUT_SVIDEO_VI2C_VI1C,
-		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-	},
-};
-
-static struct vpfe_subdev_info vpfe_sub_devs[] = {
-	{
-		.name = "tvp5146",
-		.grp_id = 0,
-		.num_inputs = ARRAY_SIZE(tvp5146_inputs),
-		.inputs = tvp5146_inputs,
-		.routes = tvp5146_routes,
-		.can_route = 1,
-		.ccdc_if_params = {
-			.if_type = VPFE_BT656,
-			.hdpol = VPFE_PINPOL_POSITIVE,
-			.vdpol = VPFE_PINPOL_POSITIVE,
-		},
-		.board_info = {
-			I2C_BOARD_INFO("tvp5146", 0x5d),
-			.platform_data = &tvp5146_pdata,
-		},
-	}
-};
-
-static struct vpfe_config vpfe_cfg = {
-	.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
-	.i2c_adapter_id = 1,
-	.sub_devs = vpfe_sub_devs,
-	.card_name = "DM355 EVM",
-	.ccdc = "DM355 CCDC",
-};
-
-/* venc standards timings */
-static struct vpbe_enc_mode_info dm355evm_enc_preset_timing[] = {
-	{
-		.name		= "ntsc",
-		.timings_type	= VPBE_ENC_STD,
-		.std_id		= V4L2_STD_NTSC,
-		.interlaced	= 1,
-		.xres		= 720,
-		.yres		= 480,
-		.aspect		= {11, 10},
-		.fps		= {30000, 1001},
-		.left_margin	= 0x79,
-		.upper_margin	= 0x10,
-	},
-	{
-		.name		= "pal",
-		.timings_type	= VPBE_ENC_STD,
-		.std_id		= V4L2_STD_PAL,
-		.interlaced	= 1,
-		.xres		= 720,
-		.yres		= 576,
-		.aspect		= {54, 59},
-		.fps		= {25, 1},
-		.left_margin	= 0x7E,
-		.upper_margin	= 0x16
-	},
-};
-
-#define VENC_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
-
-/*
- * The outputs available from VPBE + ecnoders. Keep the
- * the order same as that of encoders. First those from venc followed by that
- * from encoders. Index in the output refers to index on a particular encoder.
- * Driver uses this index to pass it to encoder when it supports more than
- * one output. Application uses index of the array to set an output.
- */
-static struct vpbe_output dm355evm_vpbe_outputs[] = {
-	{
-		.output		= {
-			.index		= 0,
-			.name		= "Composite",
-			.type		= V4L2_OUTPUT_TYPE_ANALOG,
-			.std		= VENC_STD_ALL,
-			.capabilities	= V4L2_OUT_CAP_STD,
-		},
-		.subdev_name	= DM355_VPBE_VENC_SUBDEV_NAME,
-		.default_mode	= "ntsc",
-		.num_modes	= ARRAY_SIZE(dm355evm_enc_preset_timing),
-		.modes		= dm355evm_enc_preset_timing,
-		.if_params	= MEDIA_BUS_FMT_FIXED,
-	},
-};
-
-static struct vpbe_config dm355evm_display_cfg = {
-	.module_name	= "dm355-vpbe-display",
-	.i2c_adapter_id	= 1,
-	.osd		= {
-		.module_name	= DM355_VPBE_OSD_SUBDEV_NAME,
-	},
-	.venc		= {
-		.module_name	= DM355_VPBE_VENC_SUBDEV_NAME,
-	},
-	.num_outputs	= ARRAY_SIZE(dm355evm_vpbe_outputs),
-	.outputs	= dm355evm_vpbe_outputs,
-};
-
-static struct platform_device *davinci_evm_devices[] __initdata = {
-	&dm355evm_dm9000,
-	&davinci_nand_device,
-};
-
-static void __init dm355_evm_map_io(void)
-{
-	dm355_init();
-}
-
-static int dm355evm_mmc_get_cd(int module)
-{
-	if (!gpio_is_valid(dm355evm_mmc_gpios))
-		return -ENXIO;
-	/* low == card present */
-	return !gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 1);
-}
-
-static int dm355evm_mmc_get_ro(int module)
-{
-	if (!gpio_is_valid(dm355evm_mmc_gpios))
-		return -ENXIO;
-	/* high == card's write protect switch active */
-	return gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 0);
-}
-
-static struct davinci_mmc_config dm355evm_mmc_config = {
-	.get_cd		= dm355evm_mmc_get_cd,
-	.get_ro		= dm355evm_mmc_get_ro,
-	.wires		= 4,
-	.max_freq       = 50000000,
-	.caps           = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-/* Don't connect anything to J10 unless you're only using USB host
- * mode *and* have to do so with some kind of gender-bender.  If
- * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
- * the ID pin won't need any help.
- */
-#define USB_ID_VALUE	1	/* ID pulled low */
-
-static struct spi_eeprom at25640a = {
-	.byte_len	= SZ_64K / 8,
-	.name		= "at25640a",
-	.page_size	= 32,
-	.flags		= EE_ADDR2,
-};
-
-static const struct spi_board_info dm355_evm_spi_info[] __initconst = {
-	{
-		.modalias	= "at25",
-		.platform_data	= &at25640a,
-		.max_speed_hz	= 10 * 1000 * 1000,	/* at 3v3 */
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_0,
-	},
-};
-
-static __init void dm355_evm_init(void)
-{
-	struct clk *aemif;
-	int ret;
-
-	dm355_register_clocks();
-
-	ret = dm355_gpio_register();
-	if (ret)
-		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
-	gpio_request(1, "dm9000");
-	gpio_direction_input(1);
-	dm355evm_dm9000_rsrc[2].start = gpio_to_irq(1);
-
-	aemif = clk_get(&dm355evm_dm9000.dev, "aemif");
-	if (!WARN(IS_ERR(aemif), "unable to get AEMIF clock\n"))
-		clk_prepare_enable(aemif);
-
-	platform_add_devices(davinci_evm_devices,
-			     ARRAY_SIZE(davinci_evm_devices));
-	evm_init_i2c();
-	davinci_serial_init(dm355_serial_device);
-
-	/* NOTE:  NAND flash timings set by the UBL are slower than
-	 * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
-	 * but could be 0x0400008c for about 25% faster page reads.
-	 */
-
-	gpio_request(2, "usb_id_toggle");
-	gpio_direction_output(2, USB_ID_VALUE);
-	/* irlml6401 switches over 1A in under 8 msec */
-	davinci_setup_usb(1000, 8);
-
-	davinci_setup_mmc(0, &dm355evm_mmc_config);
-	davinci_setup_mmc(1, &dm355evm_mmc_config);
-
-	dm355_init_video(&vpfe_cfg, &dm355evm_display_cfg);
-
-	dm355_init_spi0(BIT(0), dm355_evm_spi_info,
-			ARRAY_SIZE(dm355_evm_spi_info));
-
-	/* DM335 EVM uses ASP1; line-out is a stereo mini-jack */
-	dm355_init_asp1(ASP1_TX_EVT_EN | ASP1_RX_EVT_EN);
-}
-
-MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
-	.atag_offset  = 0x100,
-	.map_io	      = dm355_evm_map_io,
-	.init_irq     = dm355_init_irq,
-	.init_time	= dm355_init_time,
-	.init_machine = dm355_evm_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
deleted file mode 100644
index 32b9d607d025..000000000000
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ /dev/null
@@ -1,278 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * DM355 leopard board support
- *
- * Based on board-dm355-evm.c
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "serial.h"
-#include "davinci.h"
-
-/* NOTE:  this is geared for the standard config, with a socketed
- * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
- * swap chips, maybe with a different block size, partitioning may
- * need to be changed.
- */
-#define NAND_BLOCK_SIZE		SZ_128K
-
-static struct mtd_partition davinci_nand_partitions[] = {
-	{
-		/* UBL (a few copies) plus U-Boot */
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= 15 * NAND_BLOCK_SIZE,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	}, {
-		/* U-Boot environment */
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 1 * NAND_BLOCK_SIZE,
-		.mask_flags	= 0,
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_4M,
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem1",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_512M,
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem2",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-	/* two blocks with bad block table (and mirror) at the end */
-};
-
-static struct davinci_nand_pdata davinci_nand_data = {
-	.core_chipsel		= 0,
-	.mask_chipsel		= BIT(14),
-	.parts			= davinci_nand_partitions,
-	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
-	.engine_type		= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.ecc_placement		= NAND_ECC_PLACEMENT_INTERLEAVED,
-	.ecc_bits		= 4,
-	.bbt_options		= NAND_BBT_USE_FLASH,
-};
-
-static struct resource davinci_nand_resources[] = {
-	{
-		.start		= DM355_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DM355_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= DM355_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DM355_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device davinci_nand_device = {
-	.name			= "davinci_nand",
-	.id			= 0,
-
-	.num_resources		= ARRAY_SIZE(davinci_nand_resources),
-	.resource		= davinci_nand_resources,
-
-	.dev			= {
-		.platform_data	= &davinci_nand_data,
-	},
-};
-
-static struct davinci_i2c_platform_data i2c_pdata = {
-	.bus_freq	= 400	/* kHz */,
-	.bus_delay	= 0	/* usec */,
-};
-
-static int leopard_mmc_gpio = -EINVAL;
-
-static void dm355leopard_mmcsd_gpios(unsigned gpio)
-{
-	gpio_request(gpio + 0, "mmc0_ro");
-	gpio_request(gpio + 1, "mmc0_cd");
-	gpio_request(gpio + 2, "mmc1_ro");
-	gpio_request(gpio + 3, "mmc1_cd");
-
-	/* we "know" these are input-only so we don't
-	 * need to call gpio_direction_input()
-	 */
-
-	leopard_mmc_gpio = gpio;
-}
-
-static struct i2c_board_info dm355leopard_i2c_info[] = {
-	{ I2C_BOARD_INFO("dm355leopard_msp", 0x25),
-		.platform_data = dm355leopard_mmcsd_gpios,
-		/* plus irq */ },
-	/* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
-	/* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
-};
-
-static void __init leopard_init_i2c(void)
-{
-	davinci_init_i2c(&i2c_pdata);
-
-	gpio_request(5, "dm355leopard_msp");
-	gpio_direction_input(5);
-	dm355leopard_i2c_info[0].irq = gpio_to_irq(5);
-
-	i2c_register_board_info(1, dm355leopard_i2c_info,
-			ARRAY_SIZE(dm355leopard_i2c_info));
-}
-
-static struct resource dm355leopard_dm9000_rsrc[] = {
-	{
-		/* addr */
-		.start	= 0x04000000,
-		.end	= 0x04000001,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		/* data */
-		.start	= 0x04000016,
-		.end	= 0x04000017,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.flags	= IORESOURCE_IRQ
-			| IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */,
-	},
-};
-
-static struct platform_device dm355leopard_dm9000 = {
-	.name		= "dm9000",
-	.id		= -1,
-	.resource	= dm355leopard_dm9000_rsrc,
-	.num_resources	= ARRAY_SIZE(dm355leopard_dm9000_rsrc),
-};
-
-static struct platform_device *davinci_leopard_devices[] __initdata = {
-	&dm355leopard_dm9000,
-	&davinci_nand_device,
-};
-
-static void __init dm355_leopard_map_io(void)
-{
-	dm355_init();
-}
-
-static int dm355leopard_mmc_get_cd(int module)
-{
-	if (!gpio_is_valid(leopard_mmc_gpio))
-		return -ENXIO;
-	/* low == card present */
-	return !gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 1);
-}
-
-static int dm355leopard_mmc_get_ro(int module)
-{
-	if (!gpio_is_valid(leopard_mmc_gpio))
-		return -ENXIO;
-	/* high == card's write protect switch active */
-	return gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 0);
-}
-
-static struct davinci_mmc_config dm355leopard_mmc_config = {
-	.get_cd		= dm355leopard_mmc_get_cd,
-	.get_ro		= dm355leopard_mmc_get_ro,
-	.wires		= 4,
-	.max_freq       = 50000000,
-	.caps           = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-/* Don't connect anything to J10 unless you're only using USB host
- * mode *and* have to do so with some kind of gender-bender.  If
- * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
- * the ID pin won't need any help.
- */
-#define USB_ID_VALUE	1	/* ID pulled low */
-
-static struct spi_eeprom at25640a = {
-	.byte_len	= SZ_64K / 8,
-	.name		= "at25640a",
-	.page_size	= 32,
-	.flags		= EE_ADDR2,
-};
-
-static const struct spi_board_info dm355_leopard_spi_info[] __initconst = {
-	{
-		.modalias	= "at25",
-		.platform_data	= &at25640a,
-		.max_speed_hz	= 10 * 1000 * 1000,	/* at 3v3 */
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_0,
-	},
-};
-
-static __init void dm355_leopard_init(void)
-{
-	struct clk *aemif;
-	int ret;
-
-	dm355_register_clocks();
-
-	ret = dm355_gpio_register();
-	if (ret)
-		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
-	gpio_request(9, "dm9000");
-	gpio_direction_input(9);
-	dm355leopard_dm9000_rsrc[2].start = gpio_to_irq(9);
-
-	aemif = clk_get(&dm355leopard_dm9000.dev, "aemif");
-	if (!WARN(IS_ERR(aemif), "unable to get AEMIF clock\n"))
-		clk_prepare_enable(aemif);
-
-	platform_add_devices(davinci_leopard_devices,
-			     ARRAY_SIZE(davinci_leopard_devices));
-	leopard_init_i2c();
-	davinci_serial_init(dm355_serial_device);
-
-	/* NOTE:  NAND flash timings set by the UBL are slower than
-	 * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
-	 * but could be 0x0400008c for about 25% faster page reads.
-	 */
-
-	gpio_request(2, "usb_id_toggle");
-	gpio_direction_output(2, USB_ID_VALUE);
-	/* irlml6401 switches over 1A in under 8 msec */
-	davinci_setup_usb(1000, 8);
-
-	davinci_setup_mmc(0, &dm355leopard_mmc_config);
-	davinci_setup_mmc(1, &dm355leopard_mmc_config);
-
-	dm355_init_spi0(BIT(0), dm355_leopard_spi_info,
-			ARRAY_SIZE(dm355_leopard_spi_info));
-}
-
-MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
-	.atag_offset  = 0x100,
-	.map_io	      = dm355_leopard_map_io,
-	.init_irq     = dm355_init_irq,
-	.init_time	= dm355_init_time,
-	.init_machine = dm355_leopard_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
deleted file mode 100644
index d8c6c360818b..000000000000
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ /dev/null
@@ -1,855 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * TI DaVinci DM365 EVM board support
- *
- * Copyright (C) 2009 Texas Instruments Incorporated
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/property.h>
-#include <linux/leds.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/slab.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/nvmem-provider.h>
-#include <linux/input.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-#include <linux/v4l2-dv-timings.h>
-#include <linux/platform_data/ti-aemif.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/keyscan-davinci.h>
-
-#include <media/i2c/ths7303.h>
-#include <media/i2c/tvp514x.h>
-
-#include "mux.h"
-#include "common.h"
-#include "serial.h"
-#include "davinci.h"
-
-static inline int have_imager(void)
-{
-	/* REVISIT when it's supported, trigger via Kconfig */
-	return 0;
-}
-
-static inline int have_tvp7002(void)
-{
-	/* REVISIT when it's supported, trigger via Kconfig */
-	return 0;
-}
-
-#define DM365_EVM_PHY_ID		"davinci_mdio-0:01"
-/*
- * A MAX-II CPLD is used for various board control functions.
- */
-#define CPLD_OFFSET(a13a8,a2a1)		(((a13a8) << 10) + ((a2a1) << 3))
-
-#define CPLD_VERSION	CPLD_OFFSET(0,0)	/* r/o */
-#define CPLD_TEST	CPLD_OFFSET(0,1)
-#define CPLD_LEDS	CPLD_OFFSET(0,2)
-#define CPLD_MUX	CPLD_OFFSET(0,3)
-#define CPLD_SWITCH	CPLD_OFFSET(1,0)	/* r/o */
-#define CPLD_POWER	CPLD_OFFSET(1,1)
-#define CPLD_VIDEO	CPLD_OFFSET(1,2)
-#define CPLD_CARDSTAT	CPLD_OFFSET(1,3)	/* r/o */
-
-#define CPLD_DILC_OUT	CPLD_OFFSET(2,0)
-#define CPLD_DILC_IN	CPLD_OFFSET(2,1)	/* r/o */
-
-#define CPLD_IMG_DIR0	CPLD_OFFSET(2,2)
-#define CPLD_IMG_MUX0	CPLD_OFFSET(2,3)
-#define CPLD_IMG_MUX1	CPLD_OFFSET(3,0)
-#define CPLD_IMG_DIR1	CPLD_OFFSET(3,1)
-#define CPLD_IMG_MUX2	CPLD_OFFSET(3,2)
-#define CPLD_IMG_MUX3	CPLD_OFFSET(3,3)
-#define CPLD_IMG_DIR2	CPLD_OFFSET(4,0)
-#define CPLD_IMG_MUX4	CPLD_OFFSET(4,1)
-#define CPLD_IMG_MUX5	CPLD_OFFSET(4,2)
-
-#define CPLD_RESETS	CPLD_OFFSET(4,3)
-
-#define CPLD_CCD_DIR1	CPLD_OFFSET(0x3e,0)
-#define CPLD_CCD_IO1	CPLD_OFFSET(0x3e,1)
-#define CPLD_CCD_DIR2	CPLD_OFFSET(0x3e,2)
-#define CPLD_CCD_IO2	CPLD_OFFSET(0x3e,3)
-#define CPLD_CCD_DIR3	CPLD_OFFSET(0x3f,0)
-#define CPLD_CCD_IO3	CPLD_OFFSET(0x3f,1)
-
-static void __iomem *cpld;
-
-
-/* NOTE:  this is geared for the standard config, with a socketed
- * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
- * swap chips with a different block size, partitioning will
- * need to be changed. This NAND chip MT29F16G08FAA is the default
- * NAND shipped with the Spectrum Digital DM365 EVM
- */
-#define NAND_BLOCK_SIZE		SZ_128K
-
-static struct mtd_partition davinci_nand_partitions[] = {
-	{
-		/* UBL (a few copies) plus U-Boot */
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= 30 * NAND_BLOCK_SIZE,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	}, {
-		/* U-Boot environment */
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 2 * NAND_BLOCK_SIZE,
-		.mask_flags	= 0,
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_4M,
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem1",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_512M,
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem2",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-	/* two blocks with bad block table (and mirror) at the end */
-};
-
-static struct davinci_nand_pdata davinci_nand_data = {
-	.core_chipsel		= 0,
-	.mask_chipsel		= BIT(14),
-	.parts			= davinci_nand_partitions,
-	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
-	.engine_type		= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.bbt_options		= NAND_BBT_USE_FLASH,
-	.ecc_bits		= 4,
-};
-
-static struct resource davinci_nand_resources[] = {
-	{
-		.start		= DM365_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DM365_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= DM365_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DM365_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device davinci_aemif_devices[] = {
-	{
-		.name		= "davinci_nand",
-		.id		= 0,
-		.num_resources	= ARRAY_SIZE(davinci_nand_resources),
-		.resource	= davinci_nand_resources,
-		.dev		= {
-			.platform_data	= &davinci_nand_data,
-		},
-	}
-};
-
-static struct resource davinci_aemif_resources[] = {
-	{
-		.start		= DM365_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DM365_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct aemif_abus_data da850_evm_aemif_abus_data[] = {
-	{
-		.cs		= 1,
-	},
-};
-
-static struct aemif_platform_data davinci_aemif_pdata = {
-	.abus_data		= da850_evm_aemif_abus_data,
-	.num_abus_data		= ARRAY_SIZE(da850_evm_aemif_abus_data),
-	.sub_devices		= davinci_aemif_devices,
-	.num_sub_devices	= ARRAY_SIZE(davinci_aemif_devices),
-};
-
-static struct platform_device davinci_aemif_device = {
-	.name			= "ti-aemif",
-	.id			= -1,
-	.dev = {
-		.platform_data	= &davinci_aemif_pdata,
-	},
-	.resource		= davinci_aemif_resources,
-	.num_resources		= ARRAY_SIZE(davinci_aemif_resources),
-};
-
-static struct nvmem_cell_info davinci_nvmem_cells[] = {
-	{
-		.name		= "macaddr",
-		.offset		= 0x7f00,
-		.bytes		= ETH_ALEN,
-	}
-};
-
-static struct nvmem_cell_table davinci_nvmem_cell_table = {
-	.nvmem_name	= "1-00500",
-	.cells		= davinci_nvmem_cells,
-	.ncells		= ARRAY_SIZE(davinci_nvmem_cells),
-};
-
-static struct nvmem_cell_lookup davinci_nvmem_cell_lookup = {
-	.nvmem_name	= "1-00500",
-	.cell_name	= "macaddr",
-	.dev_id		= "davinci_emac.1",
-	.con_id		= "mac-address",
-};
-
-static const struct property_entry eeprom_properties[] = {
-	PROPERTY_ENTRY_U32("pagesize", 64),
-	{ }
-};
-
-static const struct software_node eeprom_node = {
-	.properties = eeprom_properties,
-};
-
-static struct i2c_board_info i2c_info[] = {
-	{
-		I2C_BOARD_INFO("24c256", 0x50),
-		.swnode = &eeprom_node,
-	},
-	{
-		I2C_BOARD_INFO("tlv320aic3x", 0x18),
-	},
-};
-
-static struct davinci_i2c_platform_data i2c_pdata = {
-	.bus_freq	= 400	/* kHz */,
-	.bus_delay	= 0	/* usec */,
-};
-
-/* Fixed regulator support */
-static struct regulator_consumer_supply fixed_supplies_3_3v[] = {
-	/* Baseboard 3.3V: 5V -> TPS767D301 -> 3.3V */
-	REGULATOR_SUPPLY("AVDD", "1-0018"),
-	REGULATOR_SUPPLY("DRVDD", "1-0018"),
-	REGULATOR_SUPPLY("IOVDD", "1-0018"),
-};
-
-static struct regulator_consumer_supply fixed_supplies_1_8v[] = {
-	/* Baseboard 1.8V: 5V -> TPS767D301 -> 1.8V */
-	REGULATOR_SUPPLY("DVDD", "1-0018"),
-};
-
-static int dm365evm_keyscan_enable(struct device *dev)
-{
-	return davinci_cfg_reg(DM365_KEYSCAN);
-}
-
-static unsigned short dm365evm_keymap[] = {
-	KEY_KP2,
-	KEY_LEFT,
-	KEY_EXIT,
-	KEY_DOWN,
-	KEY_ENTER,
-	KEY_UP,
-	KEY_KP1,
-	KEY_RIGHT,
-	KEY_MENU,
-	KEY_RECORD,
-	KEY_REWIND,
-	KEY_KPMINUS,
-	KEY_STOP,
-	KEY_FASTFORWARD,
-	KEY_KPPLUS,
-	KEY_PLAYPAUSE,
-	0
-};
-
-static struct davinci_ks_platform_data dm365evm_ks_data = {
-	.device_enable	= dm365evm_keyscan_enable,
-	.keymap		= dm365evm_keymap,
-	.keymapsize	= ARRAY_SIZE(dm365evm_keymap),
-	.rep		= 1,
-	/* Scan period = strobe + interval */
-	.strobe		= 0x5,
-	.interval	= 0x2,
-	.matrix_type	= DAVINCI_KEYSCAN_MATRIX_4X4,
-};
-
-static int cpld_mmc_get_cd(int module)
-{
-	if (!cpld)
-		return -ENXIO;
-
-	/* low == card present */
-	return !(__raw_readb(cpld + CPLD_CARDSTAT) & BIT(module ? 4 : 0));
-}
-
-static int cpld_mmc_get_ro(int module)
-{
-	if (!cpld)
-		return -ENXIO;
-
-	/* high == card's write protect switch active */
-	return !!(__raw_readb(cpld + CPLD_CARDSTAT) & BIT(module ? 5 : 1));
-}
-
-static struct davinci_mmc_config dm365evm_mmc_config = {
-	.get_cd		= cpld_mmc_get_cd,
-	.get_ro		= cpld_mmc_get_ro,
-	.wires		= 4,
-	.max_freq	= 50000000,
-	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-static void dm365evm_emac_configure(void)
-{
-	/*
-	 * EMAC pins are multiplexed with GPIO and UART
-	 * Further details are available at the DM365 ARM
-	 * Subsystem Users Guide(sprufg5.pdf) pages 125 - 127
-	 */
-	davinci_cfg_reg(DM365_EMAC_TX_EN);
-	davinci_cfg_reg(DM365_EMAC_TX_CLK);
-	davinci_cfg_reg(DM365_EMAC_COL);
-	davinci_cfg_reg(DM365_EMAC_TXD3);
-	davinci_cfg_reg(DM365_EMAC_TXD2);
-	davinci_cfg_reg(DM365_EMAC_TXD1);
-	davinci_cfg_reg(DM365_EMAC_TXD0);
-	davinci_cfg_reg(DM365_EMAC_RXD3);
-	davinci_cfg_reg(DM365_EMAC_RXD2);
-	davinci_cfg_reg(DM365_EMAC_RXD1);
-	davinci_cfg_reg(DM365_EMAC_RXD0);
-	davinci_cfg_reg(DM365_EMAC_RX_CLK);
-	davinci_cfg_reg(DM365_EMAC_RX_DV);
-	davinci_cfg_reg(DM365_EMAC_RX_ER);
-	davinci_cfg_reg(DM365_EMAC_CRS);
-	davinci_cfg_reg(DM365_EMAC_MDIO);
-	davinci_cfg_reg(DM365_EMAC_MDCLK);
-
-	/*
-	 * EMAC interrupts are multiplexed with GPIO interrupts
-	 * Details are available at the DM365 ARM
-	 * Subsystem Users Guide(sprufg5.pdf) pages 133 - 134
-	 */
-	davinci_cfg_reg(DM365_INT_EMAC_RXTHRESH);
-	davinci_cfg_reg(DM365_INT_EMAC_RXPULSE);
-	davinci_cfg_reg(DM365_INT_EMAC_TXPULSE);
-	davinci_cfg_reg(DM365_INT_EMAC_MISCPULSE);
-}
-
-static void dm365evm_mmc_configure(void)
-{
-	/*
-	 * MMC/SD pins are multiplexed with GPIO and EMIF
-	 * Further details are available at the DM365 ARM
-	 * Subsystem Users Guide(sprufg5.pdf) pages 118, 128 - 131
-	 */
-	davinci_cfg_reg(DM365_SD1_CLK);
-	davinci_cfg_reg(DM365_SD1_CMD);
-	davinci_cfg_reg(DM365_SD1_DATA3);
-	davinci_cfg_reg(DM365_SD1_DATA2);
-	davinci_cfg_reg(DM365_SD1_DATA1);
-	davinci_cfg_reg(DM365_SD1_DATA0);
-}
-
-static struct tvp514x_platform_data tvp5146_pdata = {
-	.clk_polarity = 0,
-	.hs_polarity = 1,
-	.vs_polarity = 1
-};
-
-#define TVP514X_STD_ALL        (V4L2_STD_NTSC | V4L2_STD_PAL)
-/* Inputs available at the TVP5146 */
-static struct v4l2_input tvp5146_inputs[] = {
-	{
-		.index = 0,
-		.name = "Composite",
-		.type = V4L2_INPUT_TYPE_CAMERA,
-		.std = TVP514X_STD_ALL,
-	},
-	{
-		.index = 1,
-		.name = "S-Video",
-		.type = V4L2_INPUT_TYPE_CAMERA,
-		.std = TVP514X_STD_ALL,
-	},
-};
-
-/*
- * this is the route info for connecting each input to decoder
- * ouput that goes to vpfe. There is a one to one correspondence
- * with tvp5146_inputs
- */
-static struct vpfe_route tvp5146_routes[] = {
-	{
-		.input = INPUT_CVBS_VI2B,
-		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-	},
-{
-		.input = INPUT_SVIDEO_VI2C_VI1C,
-		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
-	},
-};
-
-static struct vpfe_subdev_info vpfe_sub_devs[] = {
-	{
-		.name = "tvp5146",
-		.grp_id = 0,
-		.num_inputs = ARRAY_SIZE(tvp5146_inputs),
-		.inputs = tvp5146_inputs,
-		.routes = tvp5146_routes,
-		.can_route = 1,
-		.ccdc_if_params = {
-			.if_type = VPFE_BT656,
-			.hdpol = VPFE_PINPOL_POSITIVE,
-			.vdpol = VPFE_PINPOL_POSITIVE,
-		},
-		.board_info = {
-			I2C_BOARD_INFO("tvp5146", 0x5d),
-			.platform_data = &tvp5146_pdata,
-		},
-	},
-};
-
-static struct vpfe_config vpfe_cfg = {
-	.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
-	.sub_devs = vpfe_sub_devs,
-	.i2c_adapter_id = 1,
-	.card_name = "DM365 EVM",
-	.ccdc = "ISIF",
-};
-
-/* venc standards timings */
-static struct vpbe_enc_mode_info dm365evm_enc_std_timing[] = {
-	{
-		.name		= "ntsc",
-		.timings_type	= VPBE_ENC_STD,
-		.std_id		= V4L2_STD_NTSC,
-		.interlaced	= 1,
-		.xres		= 720,
-		.yres		= 480,
-		.aspect		= {11, 10},
-		.fps		= {30000, 1001},
-		.left_margin	= 0x79,
-		.upper_margin	= 0x10,
-	},
-	{
-		.name		= "pal",
-		.timings_type	= VPBE_ENC_STD,
-		.std_id		= V4L2_STD_PAL,
-		.interlaced	= 1,
-		.xres		= 720,
-		.yres		= 576,
-		.aspect		= {54, 59},
-		.fps		= {25, 1},
-		.left_margin	= 0x7E,
-		.upper_margin	= 0x16,
-	},
-};
-
-/* venc dv timings */
-static struct vpbe_enc_mode_info dm365evm_enc_preset_timing[] = {
-	{
-		.name		= "480p59_94",
-		.timings_type	= VPBE_ENC_DV_TIMINGS,
-		.dv_timings	= V4L2_DV_BT_CEA_720X480P59_94,
-		.interlaced	= 0,
-		.xres		= 720,
-		.yres		= 480,
-		.aspect		= {1, 1},
-		.fps		= {5994, 100},
-		.left_margin	= 0x8F,
-		.upper_margin	= 0x2D,
-	},
-	{
-		.name		= "576p50",
-		.timings_type	= VPBE_ENC_DV_TIMINGS,
-		.dv_timings	= V4L2_DV_BT_CEA_720X576P50,
-		.interlaced	= 0,
-		.xres		= 720,
-		.yres		= 576,
-		.aspect		= {1, 1},
-		.fps		= {50, 1},
-		.left_margin	= 0x8C,
-		.upper_margin   = 0x36,
-	},
-	{
-		.name		= "720p60",
-		.timings_type	= VPBE_ENC_DV_TIMINGS,
-		.dv_timings	= V4L2_DV_BT_CEA_1280X720P60,
-		.interlaced	= 0,
-		.xres		= 1280,
-		.yres		= 720,
-		.aspect		= {1, 1},
-		.fps		= {60, 1},
-		.left_margin	= 0x117,
-		.right_margin	= 70,
-		.upper_margin	= 38,
-		.lower_margin	= 3,
-		.hsync_len	= 80,
-		.vsync_len	= 5,
-	},
-	{
-		.name		= "1080i60",
-		.timings_type	= VPBE_ENC_DV_TIMINGS,
-		.dv_timings	= V4L2_DV_BT_CEA_1920X1080I60,
-		.interlaced	= 1,
-		.xres		= 1920,
-		.yres		= 1080,
-		.aspect		= {1, 1},
-		.fps		= {30, 1},
-		.left_margin	= 0xc9,
-		.right_margin	= 80,
-		.upper_margin	= 30,
-		.lower_margin	= 3,
-		.hsync_len	= 88,
-		.vsync_len	= 5,
-	},
-};
-
-#define VENC_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
-
-/*
- * The outputs available from VPBE + ecnoders. Keep the
- * the order same as that of encoders. First those from venc followed by that
- * from encoders. Index in the output refers to index on a particular
- * encoder.Driver uses this index to pass it to encoder when it supports more
- * than one output. Application uses index of the array to set an output.
- */
-static struct vpbe_output dm365evm_vpbe_outputs[] = {
-	{
-		.output		= {
-			.index		= 0,
-			.name		= "Composite",
-			.type		= V4L2_OUTPUT_TYPE_ANALOG,
-			.std		= VENC_STD_ALL,
-			.capabilities	= V4L2_OUT_CAP_STD,
-		},
-		.subdev_name	= DM365_VPBE_VENC_SUBDEV_NAME,
-		.default_mode	= "ntsc",
-		.num_modes	= ARRAY_SIZE(dm365evm_enc_std_timing),
-		.modes		= dm365evm_enc_std_timing,
-		.if_params	= MEDIA_BUS_FMT_FIXED,
-	},
-	{
-		.output		= {
-			.index		= 1,
-			.name		= "Component",
-			.type		= V4L2_OUTPUT_TYPE_ANALOG,
-			.capabilities	= V4L2_OUT_CAP_DV_TIMINGS,
-		},
-		.subdev_name	= DM365_VPBE_VENC_SUBDEV_NAME,
-		.default_mode	= "480p59_94",
-		.num_modes	= ARRAY_SIZE(dm365evm_enc_preset_timing),
-		.modes		= dm365evm_enc_preset_timing,
-		.if_params	= MEDIA_BUS_FMT_FIXED,
-	},
-};
-
-/*
- * Amplifiers on the board
- */
-static struct ths7303_platform_data ths7303_pdata = {
-	.ch_1 = 3,
-	.ch_2 = 3,
-	.ch_3 = 3,
-};
-
-static struct amp_config_info vpbe_amp = {
-	.module_name	= "ths7303",
-	.is_i2c		= 1,
-	.board_info	= {
-		I2C_BOARD_INFO("ths7303", 0x2c),
-		.platform_data = &ths7303_pdata,
-	}
-};
-
-static struct vpbe_config dm365evm_display_cfg = {
-	.module_name	= "dm365-vpbe-display",
-	.i2c_adapter_id	= 1,
-	.amp		= &vpbe_amp,
-	.osd		= {
-		.module_name	= DM365_VPBE_OSD_SUBDEV_NAME,
-	},
-	.venc		= {
-		.module_name	= DM365_VPBE_VENC_SUBDEV_NAME,
-	},
-	.num_outputs	= ARRAY_SIZE(dm365evm_vpbe_outputs),
-	.outputs	= dm365evm_vpbe_outputs,
-};
-
-static void __init evm_init_i2c(void)
-{
-	davinci_init_i2c(&i2c_pdata);
-	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
-}
-
-static inline int have_leds(void)
-{
-#ifdef CONFIG_LEDS_CLASS
-	return 1;
-#else
-	return 0;
-#endif
-}
-
-struct cpld_led {
-	struct led_classdev	cdev;
-	u8			mask;
-};
-
-static const struct {
-	const char *name;
-	const char *trigger;
-} cpld_leds[] = {
-	{ "dm365evm::ds2", },
-	{ "dm365evm::ds3", },
-	{ "dm365evm::ds4", },
-	{ "dm365evm::ds5", },
-	{ "dm365evm::ds6", "nand-disk", },
-	{ "dm365evm::ds7", "mmc1", },
-	{ "dm365evm::ds8", "mmc0", },
-	{ "dm365evm::ds9", "heartbeat", },
-};
-
-static void cpld_led_set(struct led_classdev *cdev, enum led_brightness b)
-{
-	struct cpld_led *led = container_of(cdev, struct cpld_led, cdev);
-	u8 reg = __raw_readb(cpld + CPLD_LEDS);
-
-	if (b != LED_OFF)
-		reg &= ~led->mask;
-	else
-		reg |= led->mask;
-	__raw_writeb(reg, cpld + CPLD_LEDS);
-}
-
-static enum led_brightness cpld_led_get(struct led_classdev *cdev)
-{
-	struct cpld_led *led = container_of(cdev, struct cpld_led, cdev);
-	u8 reg = __raw_readb(cpld + CPLD_LEDS);
-
-	return (reg & led->mask) ? LED_OFF : LED_FULL;
-}
-
-static int __init cpld_leds_init(void)
-{
-	int	i;
-
-	if (!have_leds() ||  !cpld)
-		return 0;
-
-	/* setup LEDs */
-	__raw_writeb(0xff, cpld + CPLD_LEDS);
-	for (i = 0; i < ARRAY_SIZE(cpld_leds); i++) {
-		struct cpld_led *led;
-
-		led = kzalloc(sizeof(*led), GFP_KERNEL);
-		if (!led)
-			break;
-
-		led->cdev.name = cpld_leds[i].name;
-		led->cdev.brightness_set = cpld_led_set;
-		led->cdev.brightness_get = cpld_led_get;
-		led->cdev.default_trigger = cpld_leds[i].trigger;
-		led->mask = BIT(i);
-
-		if (led_classdev_register(NULL, &led->cdev) < 0) {
-			kfree(led);
-			break;
-		}
-	}
-
-	return 0;
-}
-/* run after subsys_initcall() for LEDs */
-fs_initcall(cpld_leds_init);
-
-
-static void __init evm_init_cpld(void)
-{
-	u8 mux, resets;
-	const char *label;
-	struct clk *aemif_clk;
-	int rc;
-
-	/* Make sure we can configure the CPLD through CS1.  Then
-	 * leave it on for later access to MMC and LED registers.
-	 */
-	aemif_clk = clk_get(NULL, "aemif");
-	if (IS_ERR(aemif_clk))
-		return;
-	clk_prepare_enable(aemif_clk);
-
-	if (request_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE,
-			"cpld") == NULL)
-		goto fail;
-	cpld = ioremap(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE);
-	if (!cpld) {
-		release_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE,
-				SECTION_SIZE);
-fail:
-		pr_err("ERROR: can't map CPLD\n");
-		clk_disable_unprepare(aemif_clk);
-		return;
-	}
-
-	/* External muxing for some signals */
-	mux = 0;
-
-	/* Read SW5 to set up NAND + keypad _or_ OneNAND (sync read).
-	 * NOTE:  SW4 bus width setting must match!
-	 */
-	if ((__raw_readb(cpld + CPLD_SWITCH) & BIT(5)) == 0) {
-		/* external keypad mux */
-		mux |= BIT(7);
-
-		rc = platform_device_register(&davinci_aemif_device);
-		if (rc)
-			pr_warn("%s(): error registering the aemif device: %d\n",
-				__func__, rc);
-	} else {
-		/* no OneNAND support yet */
-	}
-
-	/* Leave external chips in reset when unused. */
-	resets = BIT(3) | BIT(2) | BIT(1) | BIT(0);
-
-	/* Static video input config with SN74CBT16214 1-of-3 mux:
-	 *  - port b1 == tvp7002 (mux lowbits == 1 or 6)
-	 *  - port b2 == imager (mux lowbits == 2 or 7)
-	 *  - port b3 == tvp5146 (mux lowbits == 5)
-	 *
-	 * Runtime switching could work too, with limitations.
-	 */
-	if (have_imager()) {
-		label = "HD imager";
-		mux |= 2;
-
-		/* externally mux MMC1/ENET/AIC33 to imager */
-		mux |= BIT(6) | BIT(5) | BIT(3);
-	} else {
-		struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-		/* we can use MMC1 ... */
-		dm365evm_mmc_configure();
-		davinci_setup_mmc(1, &dm365evm_mmc_config);
-
-		/* ... and ENET ... */
-		dm365evm_emac_configure();
-		soc_info->emac_pdata->phy_id = DM365_EVM_PHY_ID;
-		resets &= ~BIT(3);
-
-		/* ... and AIC33 */
-		resets &= ~BIT(1);
-
-		if (have_tvp7002()) {
-			mux |= 1;
-			resets &= ~BIT(2);
-			label = "tvp7002 HD";
-		} else {
-			/* default to tvp5146 */
-			mux |= 5;
-			resets &= ~BIT(0);
-			label = "tvp5146 SD";
-		}
-	}
-	__raw_writeb(mux, cpld + CPLD_MUX);
-	__raw_writeb(resets, cpld + CPLD_RESETS);
-	pr_info("EVM: %s video input\n", label);
-
-	/* REVISIT export switches: NTSC/PAL (SW5.6), EXTRA1 (SW5.2), etc */
-}
-
-static void __init dm365_evm_map_io(void)
-{
-	dm365_init();
-}
-
-static struct spi_eeprom at25640 = {
-	.byte_len	= SZ_64K / 8,
-	.name		= "at25640",
-	.page_size	= 32,
-	.flags		= EE_ADDR2,
-};
-
-static const struct spi_board_info dm365_evm_spi_info[] __initconst = {
-	{
-		.modalias	= "at25",
-		.platform_data	= &at25640,
-		.max_speed_hz	= 10 * 1000 * 1000,
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_0,
-	},
-};
-
-static __init void dm365_evm_init(void)
-{
-	int ret;
-
-	dm365_register_clocks();
-
-	ret = dm365_gpio_register();
-	if (ret)
-		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
-	regulator_register_always_on(0, "fixed-dummy", fixed_supplies_1_8v,
-				     ARRAY_SIZE(fixed_supplies_1_8v), 1800000);
-	regulator_register_always_on(1, "fixed-dummy", fixed_supplies_3_3v,
-				     ARRAY_SIZE(fixed_supplies_3_3v), 3300000);
-
-	nvmem_add_cell_table(&davinci_nvmem_cell_table);
-	nvmem_add_cell_lookups(&davinci_nvmem_cell_lookup, 1);
-
-	evm_init_i2c();
-	davinci_serial_init(dm365_serial_device);
-
-	dm365evm_emac_configure();
-	dm365evm_mmc_configure();
-
-	davinci_setup_mmc(0, &dm365evm_mmc_config);
-
-	dm365_init_video(&vpfe_cfg, &dm365evm_display_cfg);
-
-	/* maybe setup mmc1/etc ... _after_ mmc0 */
-	evm_init_cpld();
-
-#ifdef CONFIG_SND_SOC_DM365_AIC3X_CODEC
-	dm365_init_asp();
-#elif defined(CONFIG_SND_SOC_DM365_VOICE_CODEC)
-	dm365_init_vc();
-#endif
-	dm365_init_rtc();
-	dm365_init_ks(&dm365evm_ks_data);
-
-	dm365_init_spi0(BIT(0), dm365_evm_spi_info,
-			ARRAY_SIZE(dm365_evm_spi_info));
-}
-
-MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
-	.atag_offset	= 0x100,
-	.map_io		= dm365_evm_map_io,
-	.init_irq	= dm365_init_irq,
-	.init_time	= dm365_init_time,
-	.init_machine	= dm365_evm_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
deleted file mode 100644
index a46e7b9ff8e0..000000000000
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ /dev/null
@@ -1,638 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Critical Link MityOMAP-L138 SoM
- *
- * Copyright (C) 2010 Critical Link LLC - https://www.criticallink.com
- */
-
-#define pr_fmt(fmt) "MityOMAPL138: " fmt
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/platform_device.h>
-#include <linux/property.h>
-#include <linux/mtd/partitions.h>
-#include <linux/notifier.h>
-#include <linux/nvmem-consumer.h>
-#include <linux/nvmem-provider.h>
-#include <linux/regulator/machine.h>
-#include <linux/i2c.h>
-#include <linux/etherdevice.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <asm/io.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "da8xx.h"
-#include "mux.h"
-
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
-#include <linux/platform_data/ti-aemif.h>
-#include <linux/platform_data/spi-davinci.h>
-
-#define MITYOMAPL138_PHY_ID		""
-
-#define FACTORY_CONFIG_MAGIC	0x012C0138
-#define FACTORY_CONFIG_VERSION	0x00010001
-
-/* Data Held in On-Board I2C device */
-struct factory_config {
-	u32	magic;
-	u32	version;
-	u8	mac[6];
-	u32	fpga_type;
-	u32	spare;
-	u32	serialnumber;
-	char	partnum[32];
-};
-
-static struct factory_config factory_config;
-
-#ifdef CONFIG_CPU_FREQ
-struct part_no_info {
-	const char	*part_no;	/* part number string of interest */
-	int		max_freq;	/* khz */
-};
-
-static struct part_no_info mityomapl138_pn_info[] = {
-	{
-		.part_no	= "L138-C",
-		.max_freq	= 300000,
-	},
-	{
-		.part_no	= "L138-D",
-		.max_freq	= 375000,
-	},
-	{
-		.part_no	= "L138-F",
-		.max_freq	= 456000,
-	},
-	{
-		.part_no	= "1808-C",
-		.max_freq	= 300000,
-	},
-	{
-		.part_no	= "1808-D",
-		.max_freq	= 375000,
-	},
-	{
-		.part_no	= "1808-F",
-		.max_freq	= 456000,
-	},
-	{
-		.part_no	= "1810-D",
-		.max_freq	= 375000,
-	},
-};
-
-static void mityomapl138_cpufreq_init(const char *partnum)
-{
-	int i, ret;
-
-	for (i = 0; partnum && i < ARRAY_SIZE(mityomapl138_pn_info); i++) {
-		/*
-		 * the part number has additional characters beyond what is
-		 * stored in the table.  This information is not needed for
-		 * determining the speed grade, and would require several
-		 * more table entries.  Only check the first N characters
-		 * for a match.
-		 */
-		if (!strncmp(partnum, mityomapl138_pn_info[i].part_no,
-			     strlen(mityomapl138_pn_info[i].part_no))) {
-			da850_max_speed = mityomapl138_pn_info[i].max_freq;
-			break;
-		}
-	}
-
-	ret = da850_register_cpufreq("pll0_sysclk3");
-	if (ret)
-		pr_warn("cpufreq registration failed: %d\n", ret);
-}
-#else
-static void mityomapl138_cpufreq_init(const char *partnum) { }
-#endif
-
-static int read_factory_config(struct notifier_block *nb,
-			       unsigned long event, void *data)
-{
-	int ret;
-	const char *partnum = NULL;
-	struct nvmem_device *nvmem = data;
-
-	if (strcmp(nvmem_dev_name(nvmem), "1-00500") != 0)
-		return NOTIFY_DONE;
-
-	if (!IS_BUILTIN(CONFIG_NVMEM)) {
-		pr_warn("Factory Config not available without CONFIG_NVMEM\n");
-		goto bad_config;
-	}
-
-	ret = nvmem_device_read(nvmem, 0, sizeof(factory_config),
-				&factory_config);
-	if (ret != sizeof(struct factory_config)) {
-		pr_warn("Read Factory Config Failed: %d\n", ret);
-		goto bad_config;
-	}
-
-	if (factory_config.magic != FACTORY_CONFIG_MAGIC) {
-		pr_warn("Factory Config Magic Wrong (%X)\n",
-			factory_config.magic);
-		goto bad_config;
-	}
-
-	if (factory_config.version != FACTORY_CONFIG_VERSION) {
-		pr_warn("Factory Config Version Wrong (%X)\n",
-			factory_config.version);
-		goto bad_config;
-	}
-
-	partnum = factory_config.partnum;
-	pr_info("Part Number = %s\n", partnum);
-
-bad_config:
-	/* default maximum speed is valid for all platforms */
-	mityomapl138_cpufreq_init(partnum);
-
-	return NOTIFY_STOP;
-}
-
-static struct notifier_block mityomapl138_nvmem_notifier = {
-	.notifier_call = read_factory_config,
-};
-
-/*
- * We don't define a cell for factory config as it will be accessed from the
- * board file using the nvmem notifier chain.
- */
-static struct nvmem_cell_info mityomapl138_nvmem_cells[] = {
-	{
-		.name		= "macaddr",
-		.offset		= 0x64,
-		.bytes		= ETH_ALEN,
-	}
-};
-
-static struct nvmem_cell_table mityomapl138_nvmem_cell_table = {
-	.nvmem_name	= "1-00500",
-	.cells		= mityomapl138_nvmem_cells,
-	.ncells		= ARRAY_SIZE(mityomapl138_nvmem_cells),
-};
-
-static struct nvmem_cell_lookup mityomapl138_nvmem_cell_lookup = {
-	.nvmem_name	= "1-00500",
-	.cell_name	= "macaddr",
-	.dev_id		= "davinci_emac.1",
-	.con_id		= "mac-address",
-};
-
-static const struct property_entry mityomapl138_fd_chip_properties[] = {
-	PROPERTY_ENTRY_U32("pagesize", 8),
-	PROPERTY_ENTRY_BOOL("read-only"),
-	{ }
-};
-
-static const struct software_node mityomapl138_fd_chip_node = {
-	.properties = mityomapl138_fd_chip_properties,
-};
-
-static struct davinci_i2c_platform_data mityomap_i2c_0_pdata = {
-	.bus_freq	= 100,	/* kHz */
-	.bus_delay	= 0,	/* usec */
-};
-
-/* TPS65023 voltage regulator support */
-/* 1.2V Core */
-static struct regulator_consumer_supply tps65023_dcdc1_consumers[] = {
-	{
-		.supply = "cvdd",
-	},
-};
-
-/* 1.8V */
-static struct regulator_consumer_supply tps65023_dcdc2_consumers[] = {
-	{
-		.supply = "usb0_vdda18",
-	},
-	{
-		.supply = "usb1_vdda18",
-	},
-	{
-		.supply = "ddr_dvdd18",
-	},
-	{
-		.supply = "sata_vddr",
-	},
-};
-
-/* 1.2V */
-static struct regulator_consumer_supply tps65023_dcdc3_consumers[] = {
-	{
-		.supply = "sata_vdd",
-	},
-	{
-		.supply = "usb_cvdd",
-	},
-	{
-		.supply = "pll0_vdda",
-	},
-	{
-		.supply = "pll1_vdda",
-	},
-};
-
-/* 1.8V Aux LDO, not used */
-static struct regulator_consumer_supply tps65023_ldo1_consumers[] = {
-	{
-		.supply = "1.8v_aux",
-	},
-};
-
-/* FPGA VCC Aux (2.5 or 3.3) LDO */
-static struct regulator_consumer_supply tps65023_ldo2_consumers[] = {
-	{
-		.supply = "vccaux",
-	},
-};
-
-static struct regulator_init_data tps65023_regulator_data[] = {
-	/* dcdc1 */
-	{
-		.constraints = {
-			.min_uV = 1150000,
-			.max_uV = 1350000,
-			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_STATUS,
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc1_consumers),
-		.consumer_supplies = tps65023_dcdc1_consumers,
-	},
-	/* dcdc2 */
-	{
-		.constraints = {
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc2_consumers),
-		.consumer_supplies = tps65023_dcdc2_consumers,
-	},
-	/* dcdc3 */
-	{
-		.constraints = {
-			.min_uV = 1200000,
-			.max_uV = 1200000,
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc3_consumers),
-		.consumer_supplies = tps65023_dcdc3_consumers,
-	},
-	/* ldo1 */
-	{
-		.constraints = {
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65023_ldo1_consumers),
-		.consumer_supplies = tps65023_ldo1_consumers,
-	},
-	/* ldo2 */
-	{
-		.constraints = {
-			.min_uV = 2500000,
-			.max_uV = 3300000,
-			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_STATUS,
-			.boot_on = 1,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(tps65023_ldo2_consumers),
-		.consumer_supplies = tps65023_ldo2_consumers,
-	},
-};
-
-static struct i2c_board_info __initdata mityomap_tps65023_info[] = {
-	{
-		I2C_BOARD_INFO("tps65023", 0x48),
-		.platform_data = &tps65023_regulator_data[0],
-	},
-	{
-		I2C_BOARD_INFO("24c02", 0x50),
-		.swnode = &mityomapl138_fd_chip_node,
-	},
-};
-
-static int __init pmic_tps65023_init(void)
-{
-	return i2c_register_board_info(1, mityomap_tps65023_info,
-					ARRAY_SIZE(mityomap_tps65023_info));
-}
-
-/*
- * SPI Devices:
- *	SPI1_CS0: 8M Flash ST-M25P64-VME6G
- */
-static struct mtd_partition spi_flash_partitions[] = {
-	[0] = {
-		.name		= "ubl",
-		.offset		= 0,
-		.size		= SZ_64K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	[1] = {
-		.name		= "u-boot",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_512K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	[2] = {
-		.name		= "u-boot-env",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_64K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	[3] = {
-		.name		= "periph-config",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_64K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	[4] = {
-		.name		= "reserved",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_256K + SZ_64K,
-	},
-	[5] = {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_2M + SZ_1M,
-	},
-	[6] = {
-		.name		= "fpga",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_2M,
-	},
-	[7] = {
-		.name		= "spare",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct flash_platform_data mityomapl138_spi_flash_data = {
-	.name		= "m25p80",
-	.parts		= spi_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(spi_flash_partitions),
-	.type		= "m24p64",
-};
-
-static struct davinci_spi_config spi_eprom_config = {
-	.io_type	= SPI_IO_TYPE_DMA,
-	.c2tdelay	= 8,
-	.t2cdelay	= 8,
-};
-
-static struct spi_board_info mityomapl138_spi_flash_info[] = {
-	{
-		.modalias		= "m25p80",
-		.platform_data		= &mityomapl138_spi_flash_data,
-		.controller_data	= &spi_eprom_config,
-		.mode			= SPI_MODE_0,
-		.max_speed_hz		= 30000000,
-		.bus_num		= 1,
-		.chip_select		= 0,
-	},
-};
-
-/*
- * MityDSP-L138 includes a 256 MByte large-page NAND flash
- * (128K blocks).
- */
-static struct mtd_partition mityomapl138_nandflash_partition[] = {
-	{
-		.name		= "rootfs",
-		.offset		= 0,
-		.size		= SZ_128M,
-		.mask_flags	= 0, /* MTD_WRITEABLE, */
-	},
-	{
-		.name		= "homefs",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	},
-};
-
-static struct davinci_nand_pdata mityomapl138_nandflash_data = {
-	.core_chipsel	= 1,
-	.parts		= mityomapl138_nandflash_partition,
-	.nr_parts	= ARRAY_SIZE(mityomapl138_nandflash_partition),
-	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.bbt_options	= NAND_BBT_USE_FLASH,
-	.options	= NAND_BUSWIDTH_16,
-	.ecc_bits	= 1, /* 4 bit mode is not supported with 16 bit NAND */
-};
-
-static struct resource mityomapl138_nandflash_resource[] = {
-	{
-		.start	= DA8XX_AEMIF_CS3_BASE,
-		.end	= DA8XX_AEMIF_CS3_BASE + SZ_512K + 2 * SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device mityomapl138_aemif_devices[] = {
-	{
-		.name		= "davinci_nand",
-		.id		= 1,
-		.dev		= {
-			.platform_data	= &mityomapl138_nandflash_data,
-		},
-		.num_resources	= ARRAY_SIZE(mityomapl138_nandflash_resource),
-		.resource	= mityomapl138_nandflash_resource,
-	},
-};
-
-static struct resource mityomapl138_aemif_resources[] = {
-	{
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct aemif_abus_data mityomapl138_aemif_abus_data[] = {
-	{
-		.cs	= 1,
-	},
-};
-
-static struct aemif_platform_data mityomapl138_aemif_pdata = {
-	.abus_data		= mityomapl138_aemif_abus_data,
-	.num_abus_data		= ARRAY_SIZE(mityomapl138_aemif_abus_data),
-	.sub_devices		= mityomapl138_aemif_devices,
-	.num_sub_devices	= ARRAY_SIZE(mityomapl138_aemif_devices),
-};
-
-static struct platform_device mityomapl138_aemif_device = {
-	.name		= "ti-aemif",
-	.id		= -1,
-	.dev = {
-		.platform_data	= &mityomapl138_aemif_pdata,
-	},
-	.resource	= mityomapl138_aemif_resources,
-	.num_resources	= ARRAY_SIZE(mityomapl138_aemif_resources),
-};
-
-static void __init mityomapl138_setup_nand(void)
-{
-	if (platform_device_register(&mityomapl138_aemif_device))
-		pr_warn("%s: Cannot register AEMIF device\n", __func__);
-}
-
-static const short mityomap_mii_pins[] = {
-	DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
-	DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
-	DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
-	DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
-	DA850_MDIO_D,
-	-1
-};
-
-static const short mityomap_rmii_pins[] = {
-	DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN,
-	DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1,
-	DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK,
-	DA850_MDIO_D,
-	-1
-};
-
-static void __init mityomapl138_config_emac(void)
-{
-	void __iomem *cfg_chip3_base;
-	int ret;
-	u32 val;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	soc_info->emac_pdata->rmii_en = 0; /* hardcoded for now */
-
-	cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
-	val = __raw_readl(cfg_chip3_base);
-
-	if (soc_info->emac_pdata->rmii_en) {
-		val |= BIT(8);
-		ret = davinci_cfg_reg_list(mityomap_rmii_pins);
-		pr_info("RMII PHY configured\n");
-	} else {
-		val &= ~BIT(8);
-		ret = davinci_cfg_reg_list(mityomap_mii_pins);
-		pr_info("MII PHY configured\n");
-	}
-
-	if (ret) {
-		pr_warn("mii/rmii mux setup failed: %d\n", ret);
-		return;
-	}
-
-	/* configure the CFGCHIP3 register for RMII or MII */
-	__raw_writel(val, cfg_chip3_base);
-
-	soc_info->emac_pdata->phy_id = MITYOMAPL138_PHY_ID;
-
-	ret = da8xx_register_emac();
-	if (ret)
-		pr_warn("emac registration failed: %d\n", ret);
-}
-
-static void __init mityomapl138_init(void)
-{
-	int ret;
-
-	da850_register_clocks();
-
-	/* for now, no special EDMA channels are reserved */
-	ret = da850_register_edma(NULL);
-	if (ret)
-		pr_warn("edma registration failed: %d\n", ret);
-
-	ret = da8xx_register_watchdog();
-	if (ret)
-		pr_warn("watchdog registration failed: %d\n", ret);
-
-	davinci_serial_init(da8xx_serial_device);
-
-	nvmem_register_notifier(&mityomapl138_nvmem_notifier);
-	nvmem_add_cell_table(&mityomapl138_nvmem_cell_table);
-	nvmem_add_cell_lookups(&mityomapl138_nvmem_cell_lookup, 1);
-
-	ret = da8xx_register_i2c(0, &mityomap_i2c_0_pdata);
-	if (ret)
-		pr_warn("i2c0 registration failed: %d\n", ret);
-
-	ret = pmic_tps65023_init();
-	if (ret)
-		pr_warn("TPS65023 PMIC init failed: %d\n", ret);
-
-	mityomapl138_setup_nand();
-
-	ret = spi_register_board_info(mityomapl138_spi_flash_info,
-				      ARRAY_SIZE(mityomapl138_spi_flash_info));
-	if (ret)
-		pr_warn("spi info registration failed: %d\n", ret);
-
-	ret = da8xx_register_spi_bus(1,
-				     ARRAY_SIZE(mityomapl138_spi_flash_info));
-	if (ret)
-		pr_warn("spi 1 registration failed: %d\n", ret);
-
-	mityomapl138_config_emac();
-
-	ret = da8xx_register_rtc();
-	if (ret)
-		pr_warn("rtc setup failed: %d\n", ret);
-
-	ret = da8xx_register_cpuidle();
-	if (ret)
-		pr_warn("cpuidle registration failed: %d\n", ret);
-
-	davinci_pm_init();
-}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static int __init mityomapl138_console_init(void)
-{
-	if (!machine_is_mityomapl138())
-		return 0;
-
-	return add_preferred_console("ttyS", 1, "115200");
-}
-console_initcall(mityomapl138_console_init);
-#endif
-
-static void __init mityomapl138_map_io(void)
-{
-	da850_init();
-}
-
-MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808")
-	.atag_offset	= 0x100,
-	.map_io		= mityomapl138_map_io,
-	.init_irq	= da850_init_irq,
-	.init_time	= da850_init_time,
-	.init_machine	= mityomapl138_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
deleted file mode 100644
index 8a80115999ad..000000000000
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ /dev/null
@@ -1,451 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hawkboard.org based on TI's OMAP-L138 Platform
- *
- * Initial code: Syed Mohammed Khasim
- *
- * Copyright (C) 2009 Texas Instruments Incorporated - https://www.ti.com
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/mtd-davinci.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
-#include <linux/platform_data/ti-aemif.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "da8xx.h"
-#include "mux.h"
-
-#define HAWKBOARD_PHY_ID		"davinci_mdio-0:07"
-
-#define DA850_USB1_VBUS_PIN		GPIO_TO_PIN(2, 4)
-#define DA850_USB1_OC_PIN		GPIO_TO_PIN(6, 13)
-
-static short omapl138_hawk_mii_pins[] __initdata = {
-	DA850_MII_TXEN, DA850_MII_TXCLK, DA850_MII_COL, DA850_MII_TXD_3,
-	DA850_MII_TXD_2, DA850_MII_TXD_1, DA850_MII_TXD_0, DA850_MII_RXER,
-	DA850_MII_CRS, DA850_MII_RXCLK, DA850_MII_RXDV, DA850_MII_RXD_3,
-	DA850_MII_RXD_2, DA850_MII_RXD_1, DA850_MII_RXD_0, DA850_MDIO_CLK,
-	DA850_MDIO_D,
-	-1
-};
-
-static __init void omapl138_hawk_config_emac(void)
-{
-	void __iomem *cfgchip3 = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
-	int ret;
-	u32 val;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	val = __raw_readl(cfgchip3);
-	val &= ~BIT(8);
-	ret = davinci_cfg_reg_list(omapl138_hawk_mii_pins);
-	if (ret) {
-		pr_warn("%s: CPGMAC/MII mux setup failed: %d\n", __func__, ret);
-		return;
-	}
-
-	/* configure the CFGCHIP3 register for MII */
-	__raw_writel(val, cfgchip3);
-	pr_info("EMAC: MII PHY configured\n");
-
-	soc_info->emac_pdata->phy_id = HAWKBOARD_PHY_ID;
-
-	ret = da8xx_register_emac();
-	if (ret)
-		pr_warn("%s: EMAC registration failed: %d\n", __func__, ret);
-}
-
-/*
- * The following EDMA channels/slots are not being used by drivers (for
- * example: Timer, GPIO, UART events etc) on da850/omap-l138 EVM/Hawkboard,
- * hence they are being reserved for codecs on the DSP side.
- */
-static const s16 da850_dma0_rsv_chans[][2] = {
-	/* (offset, number) */
-	{ 8,  6},
-	{24,  4},
-	{30,  2},
-	{-1, -1}
-};
-
-static const s16 da850_dma0_rsv_slots[][2] = {
-	/* (offset, number) */
-	{ 8,  6},
-	{24,  4},
-	{30, 50},
-	{-1, -1}
-};
-
-static const s16 da850_dma1_rsv_chans[][2] = {
-	/* (offset, number) */
-	{ 0, 28},
-	{30,  2},
-	{-1, -1}
-};
-
-static const s16 da850_dma1_rsv_slots[][2] = {
-	/* (offset, number) */
-	{ 0, 28},
-	{30, 90},
-	{-1, -1}
-};
-
-static struct edma_rsv_info da850_edma_cc0_rsv = {
-	.rsv_chans	= da850_dma0_rsv_chans,
-	.rsv_slots	= da850_dma0_rsv_slots,
-};
-
-static struct edma_rsv_info da850_edma_cc1_rsv = {
-	.rsv_chans	= da850_dma1_rsv_chans,
-	.rsv_slots	= da850_dma1_rsv_slots,
-};
-
-static struct edma_rsv_info *da850_edma_rsv[2] = {
-	&da850_edma_cc0_rsv,
-	&da850_edma_cc1_rsv,
-};
-
-static const short hawk_mmcsd0_pins[] = {
-	DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2,
-	DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD,
-	DA850_GPIO3_12, DA850_GPIO3_13,
-	-1
-};
-
-#define DA850_HAWK_MMCSD_CD_PIN		GPIO_TO_PIN(3, 12)
-#define DA850_HAWK_MMCSD_WP_PIN		GPIO_TO_PIN(3, 13)
-
-static struct gpiod_lookup_table mmc_gpios_table = {
-	.dev_id = "da830-mmc.0",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", DA850_HAWK_MMCSD_CD_PIN, "cd",
-			    GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("davinci_gpio", DA850_HAWK_MMCSD_WP_PIN, "wp",
-			    GPIO_ACTIVE_LOW),
-	},
-};
-
-static struct davinci_mmc_config da850_mmc_config = {
-	.wires		= 4,
-	.max_freq	= 50000000,
-	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-static __init void omapl138_hawk_mmc_init(void)
-{
-	int ret;
-
-	ret = davinci_cfg_reg_list(hawk_mmcsd0_pins);
-	if (ret) {
-		pr_warn("%s: MMC/SD0 mux setup failed: %d\n", __func__, ret);
-		return;
-	}
-
-	gpiod_add_lookup_table(&mmc_gpios_table);
-
-	ret = da8xx_register_mmcsd0(&da850_mmc_config);
-	if (ret) {
-		pr_warn("%s: MMC/SD0 registration failed: %d\n", __func__, ret);
-		goto mmc_setup_mmcsd_fail;
-	}
-
-	return;
-
-mmc_setup_mmcsd_fail:
-	gpiod_remove_lookup_table(&mmc_gpios_table);
-}
-
-static struct mtd_partition omapl138_hawk_nandflash_partition[] = {
-	{
-		.name		= "u-boot env",
-		.offset		= 0,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	 },
-	{
-		.name		= "u-boot",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_512K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "free space",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	},
-};
-
-static struct davinci_aemif_timing omapl138_hawk_nandflash_timing = {
-	.wsetup		= 24,
-	.wstrobe	= 21,
-	.whold		= 14,
-	.rsetup		= 19,
-	.rstrobe	= 50,
-	.rhold		= 0,
-	.ta		= 20,
-};
-
-static struct davinci_nand_pdata omapl138_hawk_nandflash_data = {
-	.core_chipsel	= 1,
-	.parts		= omapl138_hawk_nandflash_partition,
-	.nr_parts	= ARRAY_SIZE(omapl138_hawk_nandflash_partition),
-	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
-	.ecc_bits	= 4,
-	.bbt_options	= NAND_BBT_USE_FLASH,
-	.options	= NAND_BUSWIDTH_16,
-	.timing		= &omapl138_hawk_nandflash_timing,
-	.mask_chipsel	= 0,
-	.mask_ale	= 0,
-	.mask_cle	= 0,
-};
-
-static struct resource omapl138_hawk_nandflash_resource[] = {
-	{
-		.start	= DA8XX_AEMIF_CS3_BASE,
-		.end	= DA8XX_AEMIF_CS3_BASE + SZ_32M,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource omapl138_hawk_aemif_resource[] = {
-	{
-		.start	= DA8XX_AEMIF_CTL_BASE,
-		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct aemif_abus_data omapl138_hawk_aemif_abus_data[] = {
-	{
-		.cs	= 3,
-	}
-};
-
-static struct platform_device omapl138_hawk_aemif_devices[] = {
-	{
-		.name		= "davinci_nand",
-		.id		= -1,
-		.dev		= {
-			.platform_data	= &omapl138_hawk_nandflash_data,
-		},
-		.resource	= omapl138_hawk_nandflash_resource,
-		.num_resources	= ARRAY_SIZE(omapl138_hawk_nandflash_resource),
-	}
-};
-
-static struct aemif_platform_data omapl138_hawk_aemif_pdata = {
-	.cs_offset = 2,
-	.abus_data = omapl138_hawk_aemif_abus_data,
-	.num_abus_data = ARRAY_SIZE(omapl138_hawk_aemif_abus_data),
-	.sub_devices = omapl138_hawk_aemif_devices,
-	.num_sub_devices = ARRAY_SIZE(omapl138_hawk_aemif_devices),
-};
-
-static struct platform_device omapl138_hawk_aemif_device = {
-	.name		= "ti-aemif",
-	.id		= -1,
-	.dev = {
-		.platform_data	= &omapl138_hawk_aemif_pdata,
-	},
-	.resource	= omapl138_hawk_aemif_resource,
-	.num_resources	= ARRAY_SIZE(omapl138_hawk_aemif_resource),
-};
-
-static const short omapl138_hawk_nand_pins[] = {
-	DA850_EMA_WAIT_1, DA850_NEMA_OE, DA850_NEMA_WE, DA850_NEMA_CS_3,
-	DA850_EMA_D_0, DA850_EMA_D_1, DA850_EMA_D_2, DA850_EMA_D_3,
-	DA850_EMA_D_4, DA850_EMA_D_5, DA850_EMA_D_6, DA850_EMA_D_7,
-	DA850_EMA_D_8, DA850_EMA_D_9, DA850_EMA_D_10, DA850_EMA_D_11,
-	DA850_EMA_D_12, DA850_EMA_D_13, DA850_EMA_D_14, DA850_EMA_D_15,
-	DA850_EMA_A_1, DA850_EMA_A_2,
-	-1
-};
-
-static int omapl138_hawk_register_aemif(void)
-{
-	int ret;
-
-	ret = davinci_cfg_reg_list(omapl138_hawk_nand_pins);
-	if (ret)
-		pr_warn("%s: NAND mux setup failed: %d\n", __func__, ret);
-
-	return platform_device_register(&omapl138_hawk_aemif_device);
-}
-
-static const short da850_hawk_usb11_pins[] = {
-	DA850_GPIO2_4, DA850_GPIO6_13,
-	-1
-};
-
-static struct regulator_consumer_supply hawk_usb_supplies[] = {
-	REGULATOR_SUPPLY("vbus", NULL),
-};
-
-static struct regulator_init_data hawk_usb_vbus_data = {
-	.consumer_supplies	= hawk_usb_supplies,
-	.num_consumer_supplies	= ARRAY_SIZE(hawk_usb_supplies),
-	.constraints    = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct fixed_voltage_config hawk_usb_vbus = {
-	.supply_name		= "vbus",
-	.microvolts		= 3300000,
-	.init_data		= &hawk_usb_vbus_data,
-};
-
-static struct platform_device hawk_usb_vbus_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &hawk_usb_vbus,
-	},
-};
-
-static struct gpiod_lookup_table hawk_usb_oc_gpio_lookup = {
-	.dev_id		= "ohci-da8xx",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", DA850_USB1_OC_PIN, "oc", 0),
-		{ }
-	},
-};
-
-static struct gpiod_lookup_table hawk_usb_vbus_gpio_lookup = {
-	.dev_id		= "reg-fixed-voltage.0",
-	.table = {
-		GPIO_LOOKUP("davinci_gpio", DA850_USB1_VBUS_PIN, NULL, 0),
-		{ }
-	},
-};
-
-static struct gpiod_lookup_table *hawk_usb_gpio_lookups[] = {
-	&hawk_usb_oc_gpio_lookup,
-	&hawk_usb_vbus_gpio_lookup,
-};
-
-static struct da8xx_ohci_root_hub omapl138_hawk_usb11_pdata = {
-	/* TPS2087 switch @ 5V */
-	.potpgt         = (3 + 1) / 2,  /* 3 ms max */
-};
-
-static __init void omapl138_hawk_usb_init(void)
-{
-	int ret;
-
-	ret = davinci_cfg_reg_list(da850_hawk_usb11_pins);
-	if (ret) {
-		pr_warn("%s: USB 1.1 PinMux setup failed: %d\n", __func__, ret);
-		return;
-	}
-
-	ret = da8xx_register_usb_phy_clocks();
-	if (ret)
-		pr_warn("%s: USB PHY CLK registration failed: %d\n",
-			__func__, ret);
-
-	gpiod_add_lookup_tables(hawk_usb_gpio_lookups,
-				ARRAY_SIZE(hawk_usb_gpio_lookups));
-
-	ret = da8xx_register_usb_phy();
-	if (ret)
-		pr_warn("%s: USB PHY registration failed: %d\n",
-			__func__, ret);
-
-	ret = platform_device_register(&hawk_usb_vbus_device);
-	if (ret) {
-		pr_warn("%s: Unable to register the vbus supply\n", __func__);
-		return;
-	}
-
-	ret = da8xx_register_usb11(&omapl138_hawk_usb11_pdata);
-	if (ret)
-		pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret);
-
-	return;
-}
-
-static __init void omapl138_hawk_init(void)
-{
-	int ret;
-
-	da850_register_clocks();
-
-	ret = da850_register_gpio();
-	if (ret)
-		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
-
-	davinci_serial_init(da8xx_serial_device);
-
-	omapl138_hawk_config_emac();
-
-	ret = da850_register_edma(da850_edma_rsv);
-	if (ret)
-		pr_warn("%s: EDMA registration failed: %d\n", __func__, ret);
-
-	omapl138_hawk_mmc_init();
-
-	omapl138_hawk_usb_init();
-
-	ret = omapl138_hawk_register_aemif();
-	if (ret)
-		pr_warn("%s: aemif registration failed: %d\n", __func__, ret);
-
-	ret = da8xx_register_watchdog();
-	if (ret)
-		pr_warn("%s: watchdog registration failed: %d\n",
-			__func__, ret);
-
-	ret = da8xx_register_rproc();
-	if (ret)
-		pr_warn("%s: dsp/rproc registration failed: %d\n",
-			__func__, ret);
-
-	regulator_has_full_constraints();
-}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static int __init omapl138_hawk_console_init(void)
-{
-	if (!machine_is_omapl138_hawkboard())
-		return 0;
-
-	return add_preferred_console("ttyS", 2, "115200");
-}
-console_initcall(omapl138_hawk_console_init);
-#endif
-
-static void __init omapl138_hawk_map_io(void)
-{
-	da850_init();
-}
-
-MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
-	.atag_offset	= 0x100,
-	.map_io		= omapl138_hawk_map_io,
-	.init_irq	= da850_init_irq,
-	.init_time	= da850_init_time,
-	.init_machine	= omapl138_hawk_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-	.reserve	= da8xx_rproc_reserve_cma,
-MACHINE_END
diff --git a/arch/arm/mach-davinci/common.h b/arch/arm/mach-davinci/common.h
index 772b51e0ac5e..b4fd0e9acf6c 100644
--- a/arch/arm/mach-davinci/common.h
+++ b/arch/arm/mach-davinci/common.h
@@ -17,8 +17,8 @@
 
 #include <asm/irq.h>
 
-#define DAVINCI_INTC_START		NR_IRQS
-#define DAVINCI_INTC_IRQ(_irqnum)	(DAVINCI_INTC_START + (_irqnum))
+#define DAVINCI_INTC_START             NR_IRQS
+#define DAVINCI_INTC_IRQ(_irqnum)      (DAVINCI_INTC_START + (_irqnum))
 
 struct davinci_gpio_controller;
 
@@ -45,9 +45,6 @@ struct davinci_soc_info {
 	unsigned			gpio_num;
 	unsigned			gpio_irq;
 	unsigned			gpio_unbanked;
-	struct davinci_gpio_controller	*gpio_ctlrs;
-	int				gpio_ctlrs_num;
-	struct emac_platform_data	*emac_pdata;
 	dma_addr_t			sram_dma;
 	unsigned			sram_len;
 };
diff --git a/arch/arm/mach-davinci/cputype.h b/arch/arm/mach-davinci/cputype.h
index 4590afdbe449..148a738391dc 100644
--- a/arch/arm/mach-davinci/cputype.h
+++ b/arch/arm/mach-davinci/cputype.h
@@ -25,60 +25,7 @@ struct davinci_id {
 };
 
 /* Can use lower 16 bits of cpu id  for a variant when required */
-#define	DAVINCI_CPU_ID_DM6446		0x64460000
-#define	DAVINCI_CPU_ID_DM6467		0x64670000
-#define	DAVINCI_CPU_ID_DM355		0x03550000
-#define	DAVINCI_CPU_ID_DM365		0x03650000
 #define	DAVINCI_CPU_ID_DA830		0x08300000
 #define	DAVINCI_CPU_ID_DA850		0x08500000
 
-#define IS_DAVINCI_CPU(type, id)					\
-static inline int is_davinci_ ##type(void)				\
-{									\
-	return (davinci_soc_info.cpu_id == (id));			\
-}
-
-IS_DAVINCI_CPU(dm644x, DAVINCI_CPU_ID_DM6446)
-IS_DAVINCI_CPU(dm646x, DAVINCI_CPU_ID_DM6467)
-IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355)
-IS_DAVINCI_CPU(dm365, DAVINCI_CPU_ID_DM365)
-IS_DAVINCI_CPU(da830, DAVINCI_CPU_ID_DA830)
-IS_DAVINCI_CPU(da850, DAVINCI_CPU_ID_DA850)
-
-#ifdef CONFIG_ARCH_DAVINCI_DM644x
-#define cpu_is_davinci_dm644x() is_davinci_dm644x()
-#else
-#define cpu_is_davinci_dm644x() 0
-#endif
-
-#ifdef CONFIG_ARCH_DAVINCI_DM646x
-#define cpu_is_davinci_dm646x() is_davinci_dm646x()
-#else
-#define cpu_is_davinci_dm646x() 0
-#endif
-
-#ifdef CONFIG_ARCH_DAVINCI_DM355
-#define cpu_is_davinci_dm355() is_davinci_dm355()
-#else
-#define cpu_is_davinci_dm355() 0
-#endif
-
-#ifdef CONFIG_ARCH_DAVINCI_DM365
-#define cpu_is_davinci_dm365() is_davinci_dm365()
-#else
-#define cpu_is_davinci_dm365() 0
-#endif
-
-#ifdef CONFIG_ARCH_DAVINCI_DA830
-#define cpu_is_davinci_da830() is_davinci_da830()
-#else
-#define cpu_is_davinci_da830() 0
-#endif
-
-#ifdef CONFIG_ARCH_DAVINCI_DA850
-#define cpu_is_davinci_da850() is_davinci_da850()
-#else
-#define cpu_is_davinci_da850() 0
-#endif
-
 #endif
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index eab5fac18806..2e497745b624 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -12,7 +12,6 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/irqchip/irq-davinci-cp-intc.h>
-#include <linux/platform_data/gpio-davinci.h>
 
 #include <clocksource/timer-davinci.h>
 
@@ -448,181 +447,6 @@ static const struct mux_config da830_pins[] = {
 #endif
 };
 
-const short da830_emif25_pins[] __initconst = {
-	DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3,
-	DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7,
-	DA830_EMA_D_8, DA830_EMA_D_9, DA830_EMA_D_10, DA830_EMA_D_11,
-	DA830_EMA_D_12, DA830_EMA_D_13, DA830_EMA_D_14, DA830_EMA_D_15,
-	DA830_EMA_A_0, DA830_EMA_A_1, DA830_EMA_A_2, DA830_EMA_A_3,
-	DA830_EMA_A_4, DA830_EMA_A_5, DA830_EMA_A_6, DA830_EMA_A_7,
-	DA830_EMA_A_8, DA830_EMA_A_9, DA830_EMA_A_10, DA830_EMA_A_11,
-	DA830_EMA_A_12, DA830_EMA_BA_0, DA830_EMA_BA_1, DA830_EMA_CLK,
-	DA830_EMA_SDCKE, DA830_NEMA_CS_4, DA830_NEMA_CS_5, DA830_NEMA_WE,
-	DA830_NEMA_CS_0, DA830_NEMA_CS_2, DA830_NEMA_CS_3, DA830_NEMA_OE,
-	DA830_NEMA_WE_DQM_1, DA830_NEMA_WE_DQM_0, DA830_EMA_WAIT_0,
-	-1
-};
-
-const short da830_spi0_pins[] __initconst = {
-	DA830_SPI0_SOMI_0, DA830_SPI0_SIMO_0, DA830_SPI0_CLK, DA830_NSPI0_ENA,
-	DA830_NSPI0_SCS_0,
-	-1
-};
-
-const short da830_spi1_pins[] __initconst = {
-	DA830_SPI1_SOMI_0, DA830_SPI1_SIMO_0, DA830_SPI1_CLK, DA830_NSPI1_ENA,
-	DA830_NSPI1_SCS_0,
-	-1
-};
-
-const short da830_mmc_sd_pins[] __initconst = {
-	DA830_MMCSD_DAT_0, DA830_MMCSD_DAT_1, DA830_MMCSD_DAT_2,
-	DA830_MMCSD_DAT_3, DA830_MMCSD_DAT_4, DA830_MMCSD_DAT_5,
-	DA830_MMCSD_DAT_6, DA830_MMCSD_DAT_7, DA830_MMCSD_CLK,
-	DA830_MMCSD_CMD,
-	-1
-};
-
-const short da830_uart0_pins[] __initconst = {
-	DA830_NUART0_CTS, DA830_NUART0_RTS, DA830_UART0_RXD, DA830_UART0_TXD,
-	-1
-};
-
-const short da830_uart1_pins[] __initconst = {
-	DA830_UART1_RXD, DA830_UART1_TXD,
-	-1
-};
-
-const short da830_uart2_pins[] __initconst = {
-	DA830_UART2_RXD, DA830_UART2_TXD,
-	-1
-};
-
-const short da830_usb20_pins[] __initconst = {
-	DA830_USB0_DRVVBUS, DA830_USB_REFCLKIN,
-	-1
-};
-
-const short da830_usb11_pins[] __initconst = {
-	DA830_USB_REFCLKIN,
-	-1
-};
-
-const short da830_uhpi_pins[] __initconst = {
-	DA830_UHPI_HD_0, DA830_UHPI_HD_1, DA830_UHPI_HD_2, DA830_UHPI_HD_3,
-	DA830_UHPI_HD_4, DA830_UHPI_HD_5, DA830_UHPI_HD_6, DA830_UHPI_HD_7,
-	DA830_UHPI_HD_8, DA830_UHPI_HD_9, DA830_UHPI_HD_10, DA830_UHPI_HD_11,
-	DA830_UHPI_HD_12, DA830_UHPI_HD_13, DA830_UHPI_HD_14, DA830_UHPI_HD_15,
-	DA830_UHPI_HCNTL0, DA830_UHPI_HCNTL1, DA830_UHPI_HHWIL, DA830_UHPI_HRNW,
-	DA830_NUHPI_HAS, DA830_NUHPI_HCS, DA830_NUHPI_HDS1, DA830_NUHPI_HDS2,
-	DA830_NUHPI_HINT, DA830_NUHPI_HRDY,
-	-1
-};
-
-const short da830_cpgmac_pins[] __initconst = {
-	DA830_RMII_TXD_0, DA830_RMII_TXD_1, DA830_RMII_TXEN, DA830_RMII_CRS_DV,
-	DA830_RMII_RXD_0, DA830_RMII_RXD_1, DA830_RMII_RXER, DA830_MDIO_CLK,
-	DA830_MDIO_D,
-	-1
-};
-
-const short da830_emif3c_pins[] __initconst = {
-	DA830_EMB_SDCKE, DA830_EMB_CLK_GLUE, DA830_EMB_CLK, DA830_NEMB_CS_0,
-	DA830_NEMB_CAS, DA830_NEMB_RAS, DA830_NEMB_WE, DA830_EMB_BA_1,
-	DA830_EMB_BA_0, DA830_EMB_A_0, DA830_EMB_A_1, DA830_EMB_A_2,
-	DA830_EMB_A_3, DA830_EMB_A_4, DA830_EMB_A_5, DA830_EMB_A_6,
-	DA830_EMB_A_7, DA830_EMB_A_8, DA830_EMB_A_9, DA830_EMB_A_10,
-	DA830_EMB_A_11, DA830_EMB_A_12, DA830_NEMB_WE_DQM_3,
-	DA830_NEMB_WE_DQM_2, DA830_EMB_D_0, DA830_EMB_D_1, DA830_EMB_D_2,
-	DA830_EMB_D_3, DA830_EMB_D_4, DA830_EMB_D_5, DA830_EMB_D_6,
-	DA830_EMB_D_7, DA830_EMB_D_8, DA830_EMB_D_9, DA830_EMB_D_10,
-	DA830_EMB_D_11, DA830_EMB_D_12, DA830_EMB_D_13, DA830_EMB_D_14,
-	DA830_EMB_D_15, DA830_EMB_D_16, DA830_EMB_D_17, DA830_EMB_D_18,
-	DA830_EMB_D_19, DA830_EMB_D_20, DA830_EMB_D_21, DA830_EMB_D_22,
-	DA830_EMB_D_23, DA830_EMB_D_24, DA830_EMB_D_25, DA830_EMB_D_26,
-	DA830_EMB_D_27, DA830_EMB_D_28, DA830_EMB_D_29, DA830_EMB_D_30,
-	DA830_EMB_D_31, DA830_NEMB_WE_DQM_1, DA830_NEMB_WE_DQM_0,
-	-1
-};
-
-const short da830_mcasp0_pins[] __initconst = {
-	DA830_AHCLKX0, DA830_ACLKX0, DA830_AFSX0,
-	DA830_AHCLKR0, DA830_ACLKR0, DA830_AFSR0, DA830_AMUTE0,
-	DA830_AXR0_0, DA830_AXR0_1, DA830_AXR0_2, DA830_AXR0_3,
-	DA830_AXR0_4, DA830_AXR0_5, DA830_AXR0_6, DA830_AXR0_7,
-	DA830_AXR0_8, DA830_AXR0_9, DA830_AXR0_10, DA830_AXR0_11,
-	DA830_AXR0_12, DA830_AXR0_13, DA830_AXR0_14, DA830_AXR0_15,
-	-1
-};
-
-const short da830_mcasp1_pins[] __initconst = {
-	DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1,
-	DA830_AHCLKR1, DA830_ACLKR1, DA830_AFSR1, DA830_AMUTE1,
-	DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_3,
-	DA830_AXR1_4, DA830_AXR1_5, DA830_AXR1_6, DA830_AXR1_7,
-	DA830_AXR1_8, DA830_AXR1_9, DA830_AXR1_10, DA830_AXR1_11,
-	-1
-};
-
-const short da830_mcasp2_pins[] __initconst = {
-	DA830_AHCLKX2, DA830_ACLKX2, DA830_AFSX2,
-	DA830_AHCLKR2, DA830_ACLKR2, DA830_AFSR2, DA830_AMUTE2,
-	DA830_AXR2_0, DA830_AXR2_1, DA830_AXR2_2, DA830_AXR2_3,
-	-1
-};
-
-const short da830_i2c0_pins[] __initconst = {
-	DA830_I2C0_SDA, DA830_I2C0_SCL,
-	-1
-};
-
-const short da830_i2c1_pins[] __initconst = {
-	DA830_I2C1_SCL, DA830_I2C1_SDA,
-	-1
-};
-
-const short da830_lcdcntl_pins[] __initconst = {
-	DA830_LCD_D_0, DA830_LCD_D_1, DA830_LCD_D_2, DA830_LCD_D_3,
-	DA830_LCD_D_4, DA830_LCD_D_5, DA830_LCD_D_6, DA830_LCD_D_7,
-	DA830_LCD_D_8, DA830_LCD_D_9, DA830_LCD_D_10, DA830_LCD_D_11,
-	DA830_LCD_D_12, DA830_LCD_D_13, DA830_LCD_D_14, DA830_LCD_D_15,
-	DA830_LCD_PCLK, DA830_LCD_HSYNC, DA830_LCD_VSYNC, DA830_NLCD_AC_ENB_CS,
-	DA830_LCD_MCLK,
-	-1
-};
-
-const short da830_pwm_pins[] __initconst = {
-	DA830_ECAP0_APWM0, DA830_ECAP1_APWM1, DA830_EPWM0B, DA830_EPWM0A,
-	DA830_EPWMSYNCI, DA830_EPWMSYNC0, DA830_ECAP2_APWM2, DA830_EHRPWMGLUETZ,
-	DA830_EPWM2B, DA830_EPWM2A, DA830_EPWM1B, DA830_EPWM1A,
-	-1
-};
-
-const short da830_ecap0_pins[] __initconst = {
-	DA830_ECAP0_APWM0,
-	-1
-};
-
-const short da830_ecap1_pins[] __initconst = {
-	DA830_ECAP1_APWM1,
-	-1
-};
-
-const short da830_ecap2_pins[] __initconst = {
-	DA830_ECAP2_APWM2,
-	-1
-};
-
-const short da830_eqep0_pins[] __initconst = {
-	DA830_EQEP0I, DA830_EQEP0S, DA830_EQEP0A, DA830_EQEP0B,
-	-1
-};
-
-const short da830_eqep1_pins[] __initconst = {
-	DA830_EQEP1I, DA830_EQEP1S, DA830_EQEP1A, DA830_EQEP1B,
-	-1
-};
-
 static struct map_desc da830_io_desc[] = {
 	{
 		.virtual	= IO_VIRT,
@@ -663,30 +487,6 @@ static struct davinci_id da830_ids[] = {
 	},
 };
 
-static struct davinci_gpio_platform_data da830_gpio_platform_data = {
-	.no_auto_base	= true,
-	.base		= 0,
-	.ngpio		= 128,
-};
-
-int __init da830_register_gpio(void)
-{
-	return da8xx_register_gpio(&da830_gpio_platform_data);
-}
-
-/*
- * Bottom half of timer0 is used both for clock even and clocksource.
- * Top half is used by DSP.
- */
-static const struct davinci_timer_cfg da830_timer_cfg = {
-	.reg = DEFINE_RES_IO(DA8XX_TIMER64P0_BASE, SZ_4K),
-	.irq = {
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_DA830_T12CMPINT0_0)),
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_DA8XX_TINT12_0)),
-	},
-	.cmp_off = DA830_CMP12_0,
-};
-
 static const struct davinci_soc_info davinci_soc_info_da830 = {
 	.io_desc		= da830_io_desc,
 	.io_desc_num		= ARRAY_SIZE(da830_io_desc),
@@ -696,7 +496,6 @@ static const struct davinci_soc_info davinci_soc_info_da830 = {
 	.pinmux_base		= DA8XX_SYSCFG0_BASE + 0x120,
 	.pinmux_pins		= da830_pins,
 	.pinmux_pins_num	= ARRAY_SIZE(da830_pins),
-	.emac_pdata		= &da8xx_emac_pdata,
 };
 
 void __init da830_init(void)
@@ -706,76 +505,3 @@ void __init da830_init(void)
 	da8xx_syscfg0_base = ioremap(DA8XX_SYSCFG0_BASE, SZ_4K);
 	WARN(!da8xx_syscfg0_base, "Unable to map syscfg0 module");
 }
-
-static const struct davinci_cp_intc_config da830_cp_intc_config = {
-	.reg = {
-		.start		= DA8XX_CP_INTC_BASE,
-		.end		= DA8XX_CP_INTC_BASE + SZ_8K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	.num_irqs		= DA830_N_CP_INTC_IRQ,
-};
-
-void __init da830_init_irq(void)
-{
-	davinci_cp_intc_init(&da830_cp_intc_config);
-}
-
-void __init da830_init_time(void)
-{
-	void __iomem *pll;
-	struct clk *clk;
-	int rv;
-
-	clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DA830_REF_FREQ);
-
-	pll = ioremap(DA8XX_PLL0_BASE, SZ_4K);
-
-	da830_pll_init(NULL, pll, NULL);
-
-	clk = clk_get(NULL, "timer0");
-	if (WARN_ON(IS_ERR(clk))) {
-		pr_err("Unable to get the timer clock\n");
-		return;
-	}
-
-	rv = davinci_timer_register(clk, &da830_timer_cfg);
-	WARN(rv, "Unable to register the timer: %d\n", rv);
-}
-
-static struct resource da830_psc0_resources[] = {
-	{
-		.start	= DA8XX_PSC0_BASE,
-		.end	= DA8XX_PSC0_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device da830_psc0_device = {
-	.name		= "da830-psc0",
-	.id		= -1,
-	.resource	= da830_psc0_resources,
-	.num_resources	= ARRAY_SIZE(da830_psc0_resources),
-};
-
-static struct resource da830_psc1_resources[] = {
-	{
-		.start	= DA8XX_PSC1_BASE,
-		.end	= DA8XX_PSC1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device da830_psc1_device = {
-	.name		= "da830-psc1",
-	.id		= -1,
-	.resource	= da830_psc1_resources,
-	.num_resources	= ARRAY_SIZE(da830_psc1_resources),
-};
-
-void __init da830_register_clocks(void)
-{
-	/* PLL is registered in da830_init_time() */
-	platform_device_register(&da830_psc0_device);
-	platform_device_register(&da830_psc1_device);
-}
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 635e88daf5dd..287dd987908e 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -10,19 +10,10 @@
  * 2009 (c) MontaVista Software, Inc.
  */
 
-#include <linux/clk-provider.h>
-#include <linux/clk/davinci.h>
-#include <linux/clkdev.h>
-#include <linux/cpufreq.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <linux/irqchip/irq-davinci-cp-intc.h>
 #include <linux/mfd/da8xx-cfgchip.h>
-#include <linux/platform_data/clk-da8xx-cfgchip.h>
-#include <linux/platform_data/clk-davinci-pll.h>
-#include <linux/platform_data/davinci-cpufreq.h>
-#include <linux/platform_data/gpio-davinci.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
@@ -33,6 +24,7 @@
 #include "common.h"
 #include "cputype.h"
 #include "da8xx.h"
+#include "hardware.h"
 #include "pm.h"
 #include "irqs.h"
 #include "mux.h"
@@ -258,45 +250,6 @@ static const struct mux_config da850_pins[] = {
 #endif
 };
 
-const short da850_i2c0_pins[] __initconst = {
-	DA850_I2C0_SDA, DA850_I2C0_SCL,
-	-1
-};
-
-const short da850_i2c1_pins[] __initconst = {
-	DA850_I2C1_SCL, DA850_I2C1_SDA,
-	-1
-};
-
-const short da850_lcdcntl_pins[] __initconst = {
-	DA850_LCD_D_0, DA850_LCD_D_1, DA850_LCD_D_2, DA850_LCD_D_3,
-	DA850_LCD_D_4, DA850_LCD_D_5, DA850_LCD_D_6, DA850_LCD_D_7,
-	DA850_LCD_D_8, DA850_LCD_D_9, DA850_LCD_D_10, DA850_LCD_D_11,
-	DA850_LCD_D_12, DA850_LCD_D_13, DA850_LCD_D_14, DA850_LCD_D_15,
-	DA850_LCD_PCLK, DA850_LCD_HSYNC, DA850_LCD_VSYNC, DA850_NLCD_AC_ENB_CS,
-	-1
-};
-
-const short da850_vpif_capture_pins[] __initconst = {
-	DA850_VPIF_DIN0, DA850_VPIF_DIN1, DA850_VPIF_DIN2, DA850_VPIF_DIN3,
-	DA850_VPIF_DIN4, DA850_VPIF_DIN5, DA850_VPIF_DIN6, DA850_VPIF_DIN7,
-	DA850_VPIF_DIN8, DA850_VPIF_DIN9, DA850_VPIF_DIN10, DA850_VPIF_DIN11,
-	DA850_VPIF_DIN12, DA850_VPIF_DIN13, DA850_VPIF_DIN14, DA850_VPIF_DIN15,
-	DA850_VPIF_CLKIN0, DA850_VPIF_CLKIN1, DA850_VPIF_CLKIN2,
-	DA850_VPIF_CLKIN3,
-	-1
-};
-
-const short da850_vpif_display_pins[] __initconst = {
-	DA850_VPIF_DOUT0, DA850_VPIF_DOUT1, DA850_VPIF_DOUT2, DA850_VPIF_DOUT3,
-	DA850_VPIF_DOUT4, DA850_VPIF_DOUT5, DA850_VPIF_DOUT6, DA850_VPIF_DOUT7,
-	DA850_VPIF_DOUT8, DA850_VPIF_DOUT9, DA850_VPIF_DOUT10,
-	DA850_VPIF_DOUT11, DA850_VPIF_DOUT12, DA850_VPIF_DOUT13,
-	DA850_VPIF_DOUT14, DA850_VPIF_DOUT15, DA850_VPIF_CLKO2,
-	DA850_VPIF_CLKO3,
-	-1
-};
-
 static struct map_desc da850_io_desc[] = {
 	{
 		.virtual	= IO_VIRT,
@@ -330,204 +283,9 @@ static struct davinci_id da850_ids[] = {
 	},
 };
 
-/*
- * Bottom half of timer 0 is used for clock_event, top half for
- * clocksource.
- */
-static const struct davinci_timer_cfg da850_timer_cfg = {
-	.reg = DEFINE_RES_IO(DA8XX_TIMER64P0_BASE, SZ_4K),
-	.irq = {
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_DA8XX_TINT12_0)),
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_DA8XX_TINT34_0)),
-	},
-};
-
-#ifdef CONFIG_CPU_FREQ
-/*
- * Notes:
- * According to the TRM, minimum PLLM results in maximum power savings.
- * The OPP definitions below should keep the PLLM as low as possible.
- *
- * The output of the PLLM must be between 300 to 600 MHz.
- */
-struct da850_opp {
-	unsigned int	freq;	/* in KHz */
-	unsigned int	prediv;
-	unsigned int	mult;
-	unsigned int	postdiv;
-	unsigned int	cvdd_min; /* in uV */
-	unsigned int	cvdd_max; /* in uV */
-};
-
-static const struct da850_opp da850_opp_456 = {
-	.freq		= 456000,
-	.prediv		= 1,
-	.mult		= 19,
-	.postdiv	= 1,
-	.cvdd_min	= 1300000,
-	.cvdd_max	= 1350000,
-};
-
-static const struct da850_opp da850_opp_408 = {
-	.freq		= 408000,
-	.prediv		= 1,
-	.mult		= 17,
-	.postdiv	= 1,
-	.cvdd_min	= 1300000,
-	.cvdd_max	= 1350000,
-};
-
-static const struct da850_opp da850_opp_372 = {
-	.freq		= 372000,
-	.prediv		= 2,
-	.mult		= 31,
-	.postdiv	= 1,
-	.cvdd_min	= 1200000,
-	.cvdd_max	= 1320000,
-};
-
-static const struct da850_opp da850_opp_300 = {
-	.freq		= 300000,
-	.prediv		= 1,
-	.mult		= 25,
-	.postdiv	= 2,
-	.cvdd_min	= 1200000,
-	.cvdd_max	= 1320000,
-};
-
-static const struct da850_opp da850_opp_200 = {
-	.freq		= 200000,
-	.prediv		= 1,
-	.mult		= 25,
-	.postdiv	= 3,
-	.cvdd_min	= 1100000,
-	.cvdd_max	= 1160000,
-};
-
-static const struct da850_opp da850_opp_96 = {
-	.freq		= 96000,
-	.prediv		= 1,
-	.mult		= 20,
-	.postdiv	= 5,
-	.cvdd_min	= 1000000,
-	.cvdd_max	= 1050000,
-};
-
-#define OPP(freq) 		\
-	{				\
-		.driver_data = (unsigned int) &da850_opp_##freq,	\
-		.frequency = freq * 1000, \
-	}
-
-static struct cpufreq_frequency_table da850_freq_table[] = {
-	OPP(456),
-	OPP(408),
-	OPP(372),
-	OPP(300),
-	OPP(200),
-	OPP(96),
-	{
-		.driver_data		= 0,
-		.frequency	= CPUFREQ_TABLE_END,
-	},
-};
-
-#ifdef CONFIG_REGULATOR
-static int da850_set_voltage(unsigned int index);
-static int da850_regulator_init(void);
-#endif
-
-static struct davinci_cpufreq_config cpufreq_info = {
-	.freq_table = da850_freq_table,
-#ifdef CONFIG_REGULATOR
-	.init = da850_regulator_init,
-	.set_voltage = da850_set_voltage,
-#endif
-};
-
-#ifdef CONFIG_REGULATOR
-static struct regulator *cvdd;
-
-static int da850_set_voltage(unsigned int index)
-{
-	struct da850_opp *opp;
-
-	if (!cvdd)
-		return -ENODEV;
-
-	opp = (struct da850_opp *) cpufreq_info.freq_table[index].driver_data;
-
-	return regulator_set_voltage(cvdd, opp->cvdd_min, opp->cvdd_max);
-}
-
-static int da850_regulator_init(void)
-{
-	cvdd = regulator_get(NULL, "cvdd");
-	if (WARN(IS_ERR(cvdd), "Unable to obtain voltage regulator for CVDD;"
-					" voltage scaling unsupported\n")) {
-		return PTR_ERR(cvdd);
-	}
-
-	return 0;
-}
-#endif
-
-static struct platform_device da850_cpufreq_device = {
-	.name			= "cpufreq-davinci",
-	.dev = {
-		.platform_data	= &cpufreq_info,
-	},
-	.id = -1,
-};
-
-unsigned int da850_max_speed = 300000;
-
-int da850_register_cpufreq(char *async_clk)
-{
-	int i;
-
-	/* cpufreq driver can help keep an "async" clock constant */
-	if (async_clk)
-		clk_add_alias("async", da850_cpufreq_device.name,
-							async_clk, NULL);
-	for (i = 0; i < ARRAY_SIZE(da850_freq_table); i++) {
-		if (da850_freq_table[i].frequency <= da850_max_speed) {
-			cpufreq_info.freq_table = &da850_freq_table[i];
-			break;
-		}
-	}
-
-	return platform_device_register(&da850_cpufreq_device);
-}
-#else
-int __init da850_register_cpufreq(char *async_clk)
-{
-	return 0;
-}
-#endif
-
 /* VPIF resource, platform data */
 static u64 da850_vpif_dma_mask = DMA_BIT_MASK(32);
 
-static struct resource da850_vpif_resource[] = {
-	{
-		.start = DA8XX_VPIF_BASE,
-		.end   = DA8XX_VPIF_BASE + 0xfff,
-		.flags = IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device da850_vpif_dev = {
-	.name		= "vpif",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &da850_vpif_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= da850_vpif_resource,
-	.num_resources	= ARRAY_SIZE(da850_vpif_resource),
-};
-
 static struct resource da850_vpif_display_resource[] = {
 	{
 		.start = DAVINCI_INTC_IRQ(IRQ_DA850_VPIFINT),
@@ -571,11 +329,6 @@ static struct platform_device da850_vpif_capture_dev = {
 	.num_resources  = ARRAY_SIZE(da850_vpif_capture_resource),
 };
 
-int __init da850_register_vpif(void)
-{
-	return platform_device_register(&da850_vpif_dev);
-}
-
 int __init da850_register_vpif_display(struct vpif_display_config
 						*display_config)
 {
@@ -590,17 +343,6 @@ int __init da850_register_vpif_capture(struct vpif_capture_config
 	return platform_device_register(&da850_vpif_capture_dev);
 }
 
-static struct davinci_gpio_platform_data da850_gpio_platform_data = {
-	.no_auto_base	= true,
-	.base		= 0,
-	.ngpio		= 144,
-};
-
-int __init da850_register_gpio(void)
-{
-	return da8xx_register_gpio(&da850_gpio_platform_data);
-}
-
 static const struct davinci_soc_info davinci_soc_info_da850 = {
 	.io_desc		= da850_io_desc,
 	.io_desc_num		= ARRAY_SIZE(da850_io_desc),
@@ -610,7 +352,6 @@ static const struct davinci_soc_info davinci_soc_info_da850 = {
 	.pinmux_base		= DA8XX_SYSCFG0_BASE + 0x120,
 	.pinmux_pins		= da850_pins,
 	.pinmux_pins_num	= ARRAY_SIZE(da850_pins),
-	.emac_pdata		= &da8xx_emac_pdata,
 	.sram_dma		= DA8XX_SHARED_RAM_BASE,
 	.sram_len		= SZ_128K,
 };
@@ -626,142 +367,3 @@ void __init da850_init(void)
 	da8xx_syscfg1_base = ioremap(DA8XX_SYSCFG1_BASE, SZ_4K);
 	WARN(!da8xx_syscfg1_base, "Unable to map syscfg1 module");
 }
-
-static const struct davinci_cp_intc_config da850_cp_intc_config = {
-	.reg = {
-		.start		= DA8XX_CP_INTC_BASE,
-		.end		= DA8XX_CP_INTC_BASE + SZ_8K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	.num_irqs		= DA850_N_CP_INTC_IRQ,
-};
-
-void __init da850_init_irq(void)
-{
-	davinci_cp_intc_init(&da850_cp_intc_config);
-}
-
-void __init da850_init_time(void)
-{
-	void __iomem *pll0;
-	struct regmap *cfgchip;
-	struct clk *clk;
-	int rv;
-
-	clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DA850_REF_FREQ);
-
-	pll0 = ioremap(DA8XX_PLL0_BASE, SZ_4K);
-	cfgchip = da8xx_get_cfgchip();
-
-	da850_pll0_init(NULL, pll0, cfgchip);
-
-	clk = clk_get(NULL, "timer0");
-	if (WARN_ON(IS_ERR(clk))) {
-		pr_err("Unable to get the timer clock\n");
-		return;
-	}
-
-	rv = davinci_timer_register(clk, &da850_timer_cfg);
-	WARN(rv, "Unable to register the timer: %d\n", rv);
-}
-
-static struct resource da850_pll1_resources[] = {
-	{
-		.start	= DA850_PLL1_BASE,
-		.end	= DA850_PLL1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct davinci_pll_platform_data da850_pll1_pdata;
-
-static struct platform_device da850_pll1_device = {
-	.name		= "da850-pll1",
-	.id		= -1,
-	.resource	= da850_pll1_resources,
-	.num_resources	= ARRAY_SIZE(da850_pll1_resources),
-	.dev		= {
-		.platform_data	= &da850_pll1_pdata,
-	},
-};
-
-static struct resource da850_psc0_resources[] = {
-	{
-		.start	= DA8XX_PSC0_BASE,
-		.end	= DA8XX_PSC0_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device da850_psc0_device = {
-	.name		= "da850-psc0",
-	.id		= -1,
-	.resource	= da850_psc0_resources,
-	.num_resources	= ARRAY_SIZE(da850_psc0_resources),
-};
-
-static struct resource da850_psc1_resources[] = {
-	{
-		.start	= DA8XX_PSC1_BASE,
-		.end	= DA8XX_PSC1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device da850_psc1_device = {
-	.name		= "da850-psc1",
-	.id		= -1,
-	.resource	= da850_psc1_resources,
-	.num_resources	= ARRAY_SIZE(da850_psc1_resources),
-};
-
-static struct da8xx_cfgchip_clk_platform_data da850_async1_pdata;
-
-static struct platform_device da850_async1_clksrc_device = {
-	.name		= "da850-async1-clksrc",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &da850_async1_pdata,
-	},
-};
-
-static struct da8xx_cfgchip_clk_platform_data da850_async3_pdata;
-
-static struct platform_device da850_async3_clksrc_device = {
-	.name		= "da850-async3-clksrc",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &da850_async3_pdata,
-	},
-};
-
-static struct da8xx_cfgchip_clk_platform_data da850_tbclksync_pdata;
-
-static struct platform_device da850_tbclksync_device = {
-	.name		= "da830-tbclksync",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &da850_tbclksync_pdata,
-	},
-};
-
-void __init da850_register_clocks(void)
-{
-	/* PLL0 is registered in da850_init_time() */
-
-	da850_pll1_pdata.cfgchip = da8xx_get_cfgchip();
-	platform_device_register(&da850_pll1_device);
-
-	da850_async1_pdata.cfgchip = da8xx_get_cfgchip();
-	platform_device_register(&da850_async1_clksrc_device);
-
-	da850_async3_pdata.cfgchip = da8xx_get_cfgchip();
-	platform_device_register(&da850_async3_clksrc_device);
-
-	platform_device_register(&da850_psc0_device);
-
-	platform_device_register(&da850_psc1_device);
-
-	da850_tbclksync_pdata.cfgchip = da8xx_get_cfgchip();
-	platform_device_register(&da850_tbclksync_device);
-}
diff --git a/arch/arm/mach-davinci/da8xx.h b/arch/arm/mach-davinci/da8xx.h
index 382811dbbc3b..54a255b8d8d8 100644
--- a/arch/arm/mach-davinci/da8xx.h
+++ b/arch/arm/mach-davinci/da8xx.h
@@ -9,39 +9,21 @@
 #ifndef __ASM_ARCH_DAVINCI_DA8XX_H
 #define __ASM_ARCH_DAVINCI_DA8XX_H
 
-#include <video/da8xx-fb.h>
-
+#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
-#include <linux/davinci_emac.h>
-#include <linux/spi/spi.h>
-#include <linux/platform_data/davinci_asp.h>
+#include <linux/videodev2.h>
 #include <linux/reboot.h>
 #include <linux/regmap.h>
-#include <linux/videodev2.h>
 
-#include "serial.h"
+#include "hardware.h"
 #include "pm.h"
 
-#include <linux/platform_data/edma.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/usb-davinci.h>
-#include <linux/platform_data/spi-davinci.h>
-#include <linux/platform_data/uio_pruss.h>
-
 #include <media/davinci/vpif_types.h>
 
 extern void __iomem *da8xx_syscfg0_base;
 extern void __iomem *da8xx_syscfg1_base;
 
 /*
- * If the DA850/OMAP-L138/AM18x SoC on board is of a higher speed grade
- * (than the regular 300MHz variant), the board code should set this up
- * with the supported speed before calling da850_register_cpufreq().
- */
-extern unsigned int da850_max_speed;
-
-/*
  * The cp_intc interrupt controller for the da8xx isn't in the same
  * chunk of physical memory space as the other registers (like it is
  * on the davincis) so it needs to be mapped separately.  It will be
@@ -87,83 +69,14 @@ extern unsigned int da850_max_speed;
 #define DA8XX_ARM_RAM_BASE	0xffff0000
 
 void da830_init(void);
-void da830_init_irq(void);
-void da830_init_time(void);
-void da830_register_clocks(void);
 
 void da850_init(void);
-void da850_init_irq(void);
-void da850_init_time(void);
-void da850_register_clocks(void);
 
-int da830_register_edma(struct edma_rsv_info *rsv);
-int da850_register_edma(struct edma_rsv_info *rsv[2]);
-int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata);
-int da8xx_register_spi_bus(int instance, unsigned num_chipselect);
-int da8xx_register_watchdog(void);
-int da8xx_register_usb_phy(void);
-int da8xx_register_usb20(unsigned mA, unsigned potpgt);
-int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata);
-int da8xx_register_usb_phy_clocks(void);
-int da850_register_sata_refclk(int rate);
-int da8xx_register_emac(void);
-int da8xx_register_uio_pruss(void);
-int da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata);
-int da8xx_register_mmcsd0(struct davinci_mmc_config *config);
-int da850_register_mmcsd1(struct davinci_mmc_config *config);
-void da8xx_register_mcasp(int id, struct snd_platform_data *pdata);
-int da8xx_register_rtc(void);
-int da8xx_register_gpio(void *pdata);
-int da850_register_cpufreq(char *async_clk);
-int da8xx_register_cpuidle(void);
-void __iomem *da8xx_get_mem_ctlr(void);
-int da850_register_sata(unsigned long refclkpn);
-int da850_register_vpif(void);
 int da850_register_vpif_display
 			(struct vpif_display_config *display_config);
 int da850_register_vpif_capture
 			(struct vpif_capture_config *capture_config);
-void da8xx_rproc_reserve_cma(void);
-int da8xx_register_rproc(void);
-int da850_register_gpio(void);
-int da830_register_gpio(void);
 struct regmap *da8xx_get_cfgchip(void);
-
-extern struct platform_device da8xx_serial_device[];
-extern struct emac_platform_data da8xx_emac_pdata;
-extern struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata;
-extern struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata;
-
-
-extern const short da830_emif25_pins[];
-extern const short da830_spi0_pins[];
-extern const short da830_spi1_pins[];
-extern const short da830_mmc_sd_pins[];
-extern const short da830_uart0_pins[];
-extern const short da830_uart1_pins[];
-extern const short da830_uart2_pins[];
-extern const short da830_usb20_pins[];
-extern const short da830_usb11_pins[];
-extern const short da830_uhpi_pins[];
-extern const short da830_cpgmac_pins[];
-extern const short da830_emif3c_pins[];
-extern const short da830_mcasp0_pins[];
-extern const short da830_mcasp1_pins[];
-extern const short da830_mcasp2_pins[];
-extern const short da830_i2c0_pins[];
-extern const short da830_i2c1_pins[];
-extern const short da830_lcdcntl_pins[];
-extern const short da830_pwm_pins[];
-extern const short da830_ecap0_pins[];
-extern const short da830_ecap1_pins[];
-extern const short da830_ecap2_pins[];
-extern const short da830_eqep0_pins[];
-extern const short da830_eqep1_pins[];
-extern const short da850_vpif_capture_pins[];
-extern const short da850_vpif_display_pins[];
-
-extern const short da850_i2c0_pins[];
-extern const short da850_i2c1_pins[];
-extern const short da850_lcdcntl_pins[];
+void __iomem *da8xx_get_mem_ctlr(void);
 
 #endif /* __ASM_ARCH_DAVINCI_DA8XX_H */
diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
deleted file mode 100644
index b7172797692b..000000000000
--- a/arch/arm/mach-davinci/davinci.h
+++ /dev/null
@@ -1,136 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * This file contains the processor specific definitions
- * of the TI DM644x, DM355, DM365, and DM646x.
- *
- * Copyright (C) 2011 Texas Instruments Incorporated
- * Copyright (c) 2007 Deep Root Systems, LLC
- */
-#ifndef __DAVINCI_H
-#define __DAVINCI_H
-
-#include <linux/clk.h>
-#include <linux/videodev2.h>
-#include <linux/davinci_emac.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/platform_data/davinci_asp.h>
-#include <linux/platform_data/edma.h>
-#include <linux/platform_data/keyscan-davinci.h>
-
-#include "hardware.h"
-
-#include <media/davinci/vpfe_capture.h>
-#include <media/davinci/vpif_types.h>
-#include <media/davinci/vpss.h>
-#include <media/davinci/vpbe_types.h>
-#include <media/davinci/vpbe_venc.h>
-#include <media/davinci/vpbe.h>
-#include <media/davinci/vpbe_osd.h>
-
-#define DAVINCI_PLL1_BASE		0x01c40800
-#define DAVINCI_PLL2_BASE		0x01c40c00
-#define DAVINCI_PWR_SLEEP_CNTRL_BASE	0x01c41000
-
-#define DAVINCI_SYSTEM_MODULE_BASE	0x01c40000
-#define SYSMOD_VDAC_CONFIG		0x2c
-#define SYSMOD_VIDCLKCTL		0x38
-#define SYSMOD_VPSS_CLKCTL		0x44
-#define SYSMOD_VDD3P3VPWDN		0x48
-#define SYSMOD_VSCLKDIS			0x6c
-#define SYSMOD_PUPDCTL1			0x7c
-
-/* VPSS CLKCTL bit definitions */
-#define VPSS_MUXSEL_EXTCLK_ENABLE	BIT(1)
-#define VPSS_VENCCLKEN_ENABLE		BIT(3)
-#define VPSS_DACCLKEN_ENABLE		BIT(4)
-#define VPSS_PLLC2SYSCLK5_ENABLE	BIT(5)
-
-extern void __iomem *davinci_sysmod_base;
-#define DAVINCI_SYSMOD_VIRT(x)	(davinci_sysmod_base + (x))
-void davinci_map_sysmod(void);
-
-#define DAVINCI_GPIO_BASE 0x01C67000
-int davinci_gpio_register(struct resource *res, int size, void *pdata);
-
-#define DAVINCI_TIMER0_BASE		(IO_PHYS + 0x21400)
-#define DAVINCI_WDOG_BASE		(IO_PHYS + 0x21C00)
-
-/* DM355 base addresses */
-#define DM355_ASYNC_EMIF_CONTROL_BASE	0x01e10000
-#define DM355_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
-
-#define ASP1_TX_EVT_EN	1
-#define ASP1_RX_EVT_EN	2
-
-/* DM365 base addresses */
-#define DM365_ASYNC_EMIF_CONTROL_BASE	0x01d10000
-#define DM365_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
-#define DM365_ASYNC_EMIF_DATA_CE1_BASE	0x04000000
-
-/* DM644x base addresses */
-#define DM644X_ASYNC_EMIF_CONTROL_BASE	0x01e00000
-#define DM644X_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
-#define DM644X_ASYNC_EMIF_DATA_CE1_BASE 0x04000000
-#define DM644X_ASYNC_EMIF_DATA_CE2_BASE 0x06000000
-#define DM644X_ASYNC_EMIF_DATA_CE3_BASE 0x08000000
-
-/* DM646x base addresses */
-#define DM646X_ASYNC_EMIF_CONTROL_BASE	0x20008000
-#define DM646X_ASYNC_EMIF_CS2_SPACE_BASE 0x42000000
-
-int davinci_init_wdt(void);
-
-/* DM355 function declarations */
-void dm355_init(void);
-void dm355_init_time(void);
-void dm355_init_irq(void);
-void dm355_register_clocks(void);
-void dm355_init_spi0(unsigned chipselect_mask,
-		const struct spi_board_info *info, unsigned len);
-void dm355_init_asp1(u32 evt_enable);
-int dm355_init_video(struct vpfe_config *, struct vpbe_config *);
-int dm355_gpio_register(void);
-
-/* DM365 function declarations */
-void dm365_init(void);
-void dm365_init_irq(void);
-void dm365_init_time(void);
-void dm365_register_clocks(void);
-void dm365_init_asp(void);
-void dm365_init_vc(void);
-void dm365_init_ks(struct davinci_ks_platform_data *pdata);
-void dm365_init_rtc(void);
-void dm365_init_spi0(unsigned chipselect_mask,
-			const struct spi_board_info *info, unsigned len);
-int dm365_init_video(struct vpfe_config *, struct vpbe_config *);
-int dm365_gpio_register(void);
-
-/* DM644x function declarations */
-void dm644x_init(void);
-void dm644x_init_irq(void);
-void dm644x_init_devices(void);
-void dm644x_init_time(void);
-void dm644x_register_clocks(void);
-void dm644x_init_asp(void);
-int dm644x_init_video(struct vpfe_config *, struct vpbe_config *);
-int dm644x_gpio_register(void);
-
-/* DM646x function declarations */
-void dm646x_init(void);
-void dm646x_init_irq(void);
-void dm646x_init_time(unsigned long ref_clk_rate, unsigned long aux_clkin_rate);
-void dm646x_register_clocks(void);
-void dm646x_init_mcasp0(struct snd_platform_data *pdata);
-void dm646x_init_mcasp1(struct snd_platform_data *pdata);
-int dm646x_init_edma(struct edma_rsv_info *rsv);
-void dm646x_video_init(void);
-void dm646x_setup_vpif(struct vpif_display_config *,
-		       struct vpif_capture_config *);
-int dm646x_gpio_register(void);
-
-extern struct platform_device dm365_serial_device[];
-extern struct platform_device dm355_serial_device[];
-extern struct platform_device dm644x_serial_device[];
-extern struct platform_device dm646x_serial_device[];
-#endif /*__DAVINCI_H */
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index ef9593558e5f..6939166c33c2 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -21,7 +21,6 @@
 #include "common.h"
 #include "cputype.h"
 #include "da8xx.h"
-#include "asp.h"
 #include "cpuidle.h"
 #include "irqs.h"
 #include "sram.h"
@@ -57,911 +56,6 @@
 void __iomem *da8xx_syscfg0_base;
 void __iomem *da8xx_syscfg1_base;
 
-static struct plat_serial8250_port da8xx_serial0_pdata[] = {
-	{
-		.mapbase	= DA8XX_UART0_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_DA8XX_UARTINT0),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-					UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-static struct plat_serial8250_port da8xx_serial1_pdata[] = {
-	{
-		.mapbase	= DA8XX_UART1_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_DA8XX_UARTINT1),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-					UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-static struct plat_serial8250_port da8xx_serial2_pdata[] = {
-	{
-		.mapbase	= DA8XX_UART2_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_DA8XX_UARTINT2),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-					UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-
-struct platform_device da8xx_serial_device[] = {
-	{
-		.name	= "serial8250",
-		.id	= PLAT8250_DEV_PLATFORM,
-		.dev	= {
-			.platform_data	= da8xx_serial0_pdata,
-		}
-	},
-	{
-		.name	= "serial8250",
-		.id	= PLAT8250_DEV_PLATFORM1,
-		.dev	= {
-			.platform_data	= da8xx_serial1_pdata,
-		}
-	},
-	{
-		.name	= "serial8250",
-		.id	= PLAT8250_DEV_PLATFORM2,
-		.dev	= {
-			.platform_data	= da8xx_serial2_pdata,
-		}
-	},
-	{
-	}
-};
-
-static s8 da8xx_queue_priority_mapping[][2] = {
-	/* {event queue no, Priority} */
-	{0, 3},
-	{1, 7},
-	{-1, -1}
-};
-
-static s8 da850_queue_priority_mapping[][2] = {
-	/* {event queue no, Priority} */
-	{0, 3},
-	{-1, -1}
-};
-
-static struct edma_soc_info da8xx_edma0_pdata = {
-	.queue_priority_mapping	= da8xx_queue_priority_mapping,
-	.default_queue		= EVENTQ_1,
-};
-
-static struct edma_soc_info da850_edma1_pdata = {
-	.queue_priority_mapping	= da850_queue_priority_mapping,
-	.default_queue		= EVENTQ_0,
-};
-
-static struct resource da8xx_edma0_resources[] = {
-	{
-		.name	= "edma3_cc",
-		.start	= DA8XX_TPCC_BASE,
-		.end	= DA8XX_TPCC_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc0",
-		.start	= DA8XX_TPTC0_BASE,
-		.end	= DA8XX_TPTC0_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc1",
-		.start	= DA8XX_TPTC1_BASE,
-		.end	= DA8XX_TPTC1_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_ccint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_CCINT0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma3_ccerrint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_CCERRINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource da850_edma1_resources[] = {
-	{
-		.name	= "edma3_cc",
-		.start	= DA850_TPCC1_BASE,
-		.end	= DA850_TPCC1_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc0",
-		.start	= DA850_TPTC2_BASE,
-		.end	= DA850_TPTC2_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_ccint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA850_CCINT1),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma3_ccerrint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA850_CCERRINT1),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static const struct platform_device_info da8xx_edma0_device __initconst = {
-	.name		= "edma",
-	.id		= 0,
-	.dma_mask	= DMA_BIT_MASK(32),
-	.res		= da8xx_edma0_resources,
-	.num_res	= ARRAY_SIZE(da8xx_edma0_resources),
-	.data		= &da8xx_edma0_pdata,
-	.size_data	= sizeof(da8xx_edma0_pdata),
-};
-
-static const struct platform_device_info da850_edma1_device __initconst = {
-	.name		= "edma",
-	.id		= 1,
-	.dma_mask	= DMA_BIT_MASK(32),
-	.res		= da850_edma1_resources,
-	.num_res	= ARRAY_SIZE(da850_edma1_resources),
-	.data		= &da850_edma1_pdata,
-	.size_data	= sizeof(da850_edma1_pdata),
-};
-
-static const struct dma_slave_map da830_edma_map[] = {
-	{ "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 0) },
-	{ "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 1) },
-	{ "davinci-mcasp.1", "rx", EDMA_FILTER_PARAM(0, 2) },
-	{ "davinci-mcasp.1", "tx", EDMA_FILTER_PARAM(0, 3) },
-	{ "davinci-mcasp.2", "rx", EDMA_FILTER_PARAM(0, 4) },
-	{ "davinci-mcasp.2", "tx", EDMA_FILTER_PARAM(0, 5) },
-	{ "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 14) },
-	{ "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 15) },
-	{ "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 16) },
-	{ "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 17) },
-	{ "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 18) },
-	{ "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 19) },
-};
-
-int __init da830_register_edma(struct edma_rsv_info *rsv)
-{
-	struct platform_device *edma_pdev;
-
-	da8xx_edma0_pdata.rsv = rsv;
-
-	da8xx_edma0_pdata.slave_map = da830_edma_map;
-	da8xx_edma0_pdata.slavecnt = ARRAY_SIZE(da830_edma_map);
-
-	edma_pdev = platform_device_register_full(&da8xx_edma0_device);
-	return PTR_ERR_OR_ZERO(edma_pdev);
-}
-
-static const struct dma_slave_map da850_edma0_map[] = {
-	{ "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 0) },
-	{ "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 1) },
-	{ "davinci-mcbsp.0", "rx", EDMA_FILTER_PARAM(0, 2) },
-	{ "davinci-mcbsp.0", "tx", EDMA_FILTER_PARAM(0, 3) },
-	{ "davinci-mcbsp.1", "rx", EDMA_FILTER_PARAM(0, 4) },
-	{ "davinci-mcbsp.1", "tx", EDMA_FILTER_PARAM(0, 5) },
-	{ "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 14) },
-	{ "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 15) },
-	{ "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 16) },
-	{ "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 17) },
-	{ "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 18) },
-	{ "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 19) },
-};
-
-static const struct dma_slave_map da850_edma1_map[] = {
-	{ "da830-mmc.1", "rx", EDMA_FILTER_PARAM(1, 28) },
-	{ "da830-mmc.1", "tx", EDMA_FILTER_PARAM(1, 29) },
-};
-
-int __init da850_register_edma(struct edma_rsv_info *rsv[2])
-{
-	struct platform_device *edma_pdev;
-
-	if (rsv) {
-		da8xx_edma0_pdata.rsv = rsv[0];
-		da850_edma1_pdata.rsv = rsv[1];
-	}
-
-	da8xx_edma0_pdata.slave_map = da850_edma0_map;
-	da8xx_edma0_pdata.slavecnt = ARRAY_SIZE(da850_edma0_map);
-
-	edma_pdev = platform_device_register_full(&da8xx_edma0_device);
-	if (IS_ERR(edma_pdev)) {
-		pr_warn("%s: Failed to register eDMA0\n", __func__);
-		return PTR_ERR(edma_pdev);
-	}
-
-	da850_edma1_pdata.slave_map = da850_edma1_map;
-	da850_edma1_pdata.slavecnt = ARRAY_SIZE(da850_edma1_map);
-
-	edma_pdev = platform_device_register_full(&da850_edma1_device);
-	return PTR_ERR_OR_ZERO(edma_pdev);
-}
-
-static struct resource da8xx_i2c_resources0[] = {
-	{
-		.start	= DA8XX_I2C0_BASE,
-		.end	= DA8XX_I2C0_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_I2CINT0),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_I2CINT0),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da8xx_i2c_device0 = {
-	.name		= "i2c_davinci",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(da8xx_i2c_resources0),
-	.resource	= da8xx_i2c_resources0,
-};
-
-static struct resource da8xx_i2c_resources1[] = {
-	{
-		.start	= DA8XX_I2C1_BASE,
-		.end	= DA8XX_I2C1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_I2CINT1),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_I2CINT1),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da8xx_i2c_device1 = {
-	.name		= "i2c_davinci",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(da8xx_i2c_resources1),
-	.resource	= da8xx_i2c_resources1,
-};
-
-int __init da8xx_register_i2c(int instance,
-		struct davinci_i2c_platform_data *pdata)
-{
-	struct platform_device *pdev;
-
-	if (instance == 0)
-		pdev = &da8xx_i2c_device0;
-	else if (instance == 1)
-		pdev = &da8xx_i2c_device1;
-	else
-		return -EINVAL;
-
-	pdev->dev.platform_data = pdata;
-	return platform_device_register(pdev);
-}
-
-static struct resource da8xx_watchdog_resources[] = {
-	{
-		.start	= DA8XX_WDOG_BASE,
-		.end	= DA8XX_WDOG_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device da8xx_wdt_device = {
-	.name		= "davinci-wdt",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(da8xx_watchdog_resources),
-	.resource	= da8xx_watchdog_resources,
-};
-
-int __init da8xx_register_watchdog(void)
-{
-	return platform_device_register(&da8xx_wdt_device);
-}
-
-static struct resource da8xx_emac_resources[] = {
-	{
-		.start	= DA8XX_EMAC_CPPI_PORT_BASE,
-		.end	= DA8XX_EMAC_CPPI_PORT_BASE + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_C0_RX_THRESH_PULSE),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_C0_RX_THRESH_PULSE),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_C0_RX_PULSE),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_C0_RX_PULSE),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_C0_TX_PULSE),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_C0_TX_PULSE),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_C0_MISC_PULSE),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_C0_MISC_PULSE),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct emac_platform_data da8xx_emac_pdata = {
-	.ctrl_reg_offset	= DA8XX_EMAC_CTRL_REG_OFFSET,
-	.ctrl_mod_reg_offset	= DA8XX_EMAC_MOD_REG_OFFSET,
-	.ctrl_ram_offset	= DA8XX_EMAC_RAM_OFFSET,
-	.ctrl_ram_size		= DA8XX_EMAC_CTRL_RAM_SIZE,
-	.version		= EMAC_VERSION_2,
-};
-
-static struct platform_device da8xx_emac_device = {
-	.name		= "davinci_emac",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &da8xx_emac_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(da8xx_emac_resources),
-	.resource	= da8xx_emac_resources,
-};
-
-static struct resource da8xx_mdio_resources[] = {
-	{
-		.start	= DA8XX_EMAC_MDIO_BASE,
-		.end	= DA8XX_EMAC_MDIO_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device da8xx_mdio_device = {
-	.name		= "davinci_mdio",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(da8xx_mdio_resources),
-	.resource	= da8xx_mdio_resources,
-};
-
-int __init da8xx_register_emac(void)
-{
-	int ret;
-
-	ret = platform_device_register(&da8xx_mdio_device);
-	if (ret < 0)
-		return ret;
-
-	return platform_device_register(&da8xx_emac_device);
-}
-
-static struct resource da830_mcasp1_resources[] = {
-	{
-		.name	= "mpu",
-		.start	= DAVINCI_DA830_MCASP1_REG_BASE,
-		.end	= DAVINCI_DA830_MCASP1_REG_BASE + (SZ_1K * 12) - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	/* TX event */
-	{
-		.name	= "tx",
-		.start	= DAVINCI_DA830_DMA_MCASP1_AXEVT,
-		.end	= DAVINCI_DA830_DMA_MCASP1_AXEVT,
-		.flags	= IORESOURCE_DMA,
-	},
-	/* RX event */
-	{
-		.name	= "rx",
-		.start	= DAVINCI_DA830_DMA_MCASP1_AREVT,
-		.end	= DAVINCI_DA830_DMA_MCASP1_AREVT,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.name	= "common",
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_MCASPINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da830_mcasp1_device = {
-	.name		= "davinci-mcasp",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(da830_mcasp1_resources),
-	.resource	= da830_mcasp1_resources,
-};
-
-static struct resource da830_mcasp2_resources[] = {
-	{
-		.name	= "mpu",
-		.start	= DAVINCI_DA830_MCASP2_REG_BASE,
-		.end	= DAVINCI_DA830_MCASP2_REG_BASE + (SZ_1K * 12) - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	/* TX event */
-	{
-		.name	= "tx",
-		.start	= DAVINCI_DA830_DMA_MCASP2_AXEVT,
-		.end	= DAVINCI_DA830_DMA_MCASP2_AXEVT,
-		.flags	= IORESOURCE_DMA,
-	},
-	/* RX event */
-	{
-		.name	= "rx",
-		.start	= DAVINCI_DA830_DMA_MCASP2_AREVT,
-		.end	= DAVINCI_DA830_DMA_MCASP2_AREVT,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.name	= "common",
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_MCASPINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da830_mcasp2_device = {
-	.name		= "davinci-mcasp",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(da830_mcasp2_resources),
-	.resource	= da830_mcasp2_resources,
-};
-
-static struct resource da850_mcasp_resources[] = {
-	{
-		.name	= "mpu",
-		.start	= DAVINCI_DA8XX_MCASP0_REG_BASE,
-		.end	= DAVINCI_DA8XX_MCASP0_REG_BASE + (SZ_1K * 12) - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	/* TX event */
-	{
-		.name	= "tx",
-		.start	= DAVINCI_DA8XX_DMA_MCASP0_AXEVT,
-		.end	= DAVINCI_DA8XX_DMA_MCASP0_AXEVT,
-		.flags	= IORESOURCE_DMA,
-	},
-	/* RX event */
-	{
-		.name	= "rx",
-		.start	= DAVINCI_DA8XX_DMA_MCASP0_AREVT,
-		.end	= DAVINCI_DA8XX_DMA_MCASP0_AREVT,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.name	= "common",
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_MCASPINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da850_mcasp_device = {
-	.name		= "davinci-mcasp",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(da850_mcasp_resources),
-	.resource	= da850_mcasp_resources,
-};
-
-void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata)
-{
-	struct platform_device *pdev;
-
-	switch (id) {
-	case 0:
-		/* Valid for DA830/OMAP-L137 or DA850/OMAP-L138 */
-		pdev = &da850_mcasp_device;
-		break;
-	case 1:
-		/* Valid for DA830/OMAP-L137 only */
-		if (!cpu_is_davinci_da830())
-			return;
-		pdev = &da830_mcasp1_device;
-		break;
-	case 2:
-		/* Valid for DA830/OMAP-L137 only */
-		if (!cpu_is_davinci_da830())
-			return;
-		pdev = &da830_mcasp2_device;
-		break;
-	default:
-		return;
-	}
-
-	pdev->dev.platform_data = pdata;
-	platform_device_register(pdev);
-}
-
-static struct resource da8xx_pruss_resources[] = {
-	{
-		.start	= DA8XX_PRUSS_MEM_BASE,
-		.end	= DA8XX_PRUSS_MEM_BASE + 0xFFFF,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT0),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT1),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT1),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT2),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT2),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT3),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT3),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT4),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT4),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT5),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT5),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT6),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT6),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT7),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_EVTOUT7),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct uio_pruss_pdata da8xx_uio_pruss_pdata = {
-	.pintc_base	= 0x4000,
-};
-
-static struct platform_device da8xx_uio_pruss_dev = {
-	.name		= "pruss_uio",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(da8xx_pruss_resources),
-	.resource	= da8xx_pruss_resources,
-	.dev		= {
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &da8xx_uio_pruss_pdata,
-	}
-};
-
-int __init da8xx_register_uio_pruss(void)
-{
-	da8xx_uio_pruss_pdata.sram_pool = sram_get_gen_pool();
-	return platform_device_register(&da8xx_uio_pruss_dev);
-}
-
-static struct lcd_ctrl_config lcd_cfg = {
-	.panel_shade		= COLOR_ACTIVE,
-	.bpp			= 16,
-};
-
-struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata = {
-	.manu_name		= "sharp",
-	.controller_data	= &lcd_cfg,
-	.type			= "Sharp_LCD035Q3DG01",
-};
-
-struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata = {
-	.manu_name		= "sharp",
-	.controller_data	= &lcd_cfg,
-	.type			= "Sharp_LK043T1DG01",
-};
-
-static struct resource da8xx_lcdc_resources[] = {
-	[0] = { /* registers */
-		.start  = DA8XX_LCD_CNTRL_BASE,
-		.end    = DA8XX_LCD_CNTRL_BASE + SZ_4K - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = { /* interrupt */
-		.start  = DAVINCI_INTC_IRQ(IRQ_DA8XX_LCDINT),
-		.end    = DAVINCI_INTC_IRQ(IRQ_DA8XX_LCDINT),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da8xx_lcdc_device = {
-	.name		= "da8xx_lcdc",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(da8xx_lcdc_resources),
-	.resource	= da8xx_lcdc_resources,
-	.dev		= {
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-
-int __init da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata)
-{
-	da8xx_lcdc_device.dev.platform_data = pdata;
-	return platform_device_register(&da8xx_lcdc_device);
-}
-
-static struct resource da8xx_gpio_resources[] = {
-	{ /* registers */
-		.start	= DA8XX_GPIO_BASE,
-		.end	= DA8XX_GPIO_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{ /* interrupt */
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO0),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO1),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO1),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO2),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO2),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO3),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO3),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO4),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO4),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO5),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO5),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO6),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO6),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO7),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO7),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO8),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_GPIO8),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da8xx_gpio_device = {
-	.name		= "davinci_gpio",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(da8xx_gpio_resources),
-	.resource	= da8xx_gpio_resources,
-};
-
-int __init da8xx_register_gpio(void *pdata)
-{
-	da8xx_gpio_device.dev.platform_data = pdata;
-	return platform_device_register(&da8xx_gpio_device);
-}
-
-static struct resource da8xx_mmcsd0_resources[] = {
-	{		/* registers */
-		.start	= DA8XX_MMCSD0_BASE,
-		.end	= DA8XX_MMCSD0_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{		/* interrupt */
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_MMCSDINT0),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_MMCSDINT0),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da8xx_mmcsd0_device = {
-	.name		= "da830-mmc",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(da8xx_mmcsd0_resources),
-	.resource	= da8xx_mmcsd0_resources,
-};
-
-int __init da8xx_register_mmcsd0(struct davinci_mmc_config *config)
-{
-	da8xx_mmcsd0_device.dev.platform_data = config;
-	return platform_device_register(&da8xx_mmcsd0_device);
-}
-
-#ifdef CONFIG_ARCH_DAVINCI_DA850
-static struct resource da850_mmcsd1_resources[] = {
-	{		/* registers */
-		.start	= DA850_MMCSD1_BASE,
-		.end	= DA850_MMCSD1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{		/* interrupt */
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA850_MMCSDINT0_1),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA850_MMCSDINT0_1),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da850_mmcsd1_device = {
-	.name		= "da830-mmc",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(da850_mmcsd1_resources),
-	.resource	= da850_mmcsd1_resources,
-};
-
-int __init da850_register_mmcsd1(struct davinci_mmc_config *config)
-{
-	da850_mmcsd1_device.dev.platform_data = config;
-	return platform_device_register(&da850_mmcsd1_device);
-}
-#endif
-
-static struct resource da8xx_rproc_resources[] = {
-	{ /* DSP boot address */
-		.name		= "host1cfg",
-		.start		= DA8XX_SYSCFG0_BASE + DA8XX_HOST1CFG_REG,
-		.end		= DA8XX_SYSCFG0_BASE + DA8XX_HOST1CFG_REG + 3,
-		.flags		= IORESOURCE_MEM,
-	},
-	{ /* DSP interrupt registers */
-		.name		= "chipsig",
-		.start		= DA8XX_SYSCFG0_BASE + DA8XX_CHIPSIG_REG,
-		.end		= DA8XX_SYSCFG0_BASE + DA8XX_CHIPSIG_REG + 7,
-		.flags		= IORESOURCE_MEM,
-	},
-	{ /* DSP L2 RAM */
-		.name		= "l2sram",
-		.start		= DA8XX_DSP_L2_RAM_BASE,
-		.end		= DA8XX_DSP_L2_RAM_BASE + SZ_256K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{ /* DSP L1P RAM */
-		.name		= "l1pram",
-		.start		= DA8XX_DSP_L1P_RAM_BASE,
-		.end		= DA8XX_DSP_L1P_RAM_BASE + SZ_32K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{ /* DSP L1D RAM */
-		.name		= "l1dram",
-		.start		= DA8XX_DSP_L1D_RAM_BASE,
-		.end		= DA8XX_DSP_L1D_RAM_BASE + SZ_32K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{ /* dsp irq */
-		.start		= DAVINCI_INTC_IRQ(IRQ_DA8XX_CHIPINT0),
-		.end		= DAVINCI_INTC_IRQ(IRQ_DA8XX_CHIPINT0),
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da8xx_dsp = {
-	.name	= "davinci-rproc",
-	.dev	= {
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(da8xx_rproc_resources),
-	.resource	= da8xx_rproc_resources,
-};
-
-static bool rproc_mem_inited __initdata;
-
-#if IS_ENABLED(CONFIG_DA8XX_REMOTEPROC)
-
-static phys_addr_t rproc_base __initdata;
-static unsigned long rproc_size __initdata;
-
-static int __init early_rproc_mem(char *p)
-{
-	char *endp;
-
-	if (p == NULL)
-		return 0;
-
-	rproc_size = memparse(p, &endp);
-	if (*endp == '@')
-		rproc_base = memparse(endp + 1, NULL);
-
-	return 0;
-}
-early_param("rproc_mem", early_rproc_mem);
-
-void __init da8xx_rproc_reserve_cma(void)
-{
-	struct cma *cma;
-	int ret;
-
-	if (!rproc_base || !rproc_size) {
-		pr_err("%s: 'rproc_mem=nn@address' badly specified\n"
-		       "    'nn' and 'address' must both be non-zero\n",
-		       __func__);
-
-		return;
-	}
-
-	pr_info("%s: reserving 0x%lx @ 0x%lx...\n",
-		__func__, rproc_size, (unsigned long)rproc_base);
-
-	ret = dma_contiguous_reserve_area(rproc_size, rproc_base, 0, &cma,
-			true);
-	if (ret) {
-		pr_err("%s: dma_contiguous_reserve_area failed %d\n",
-			__func__, ret);
-		return;
-	}
-	da8xx_dsp.dev.cma_area = cma;
-	rproc_mem_inited = true;
-}
-#else
-
-void __init da8xx_rproc_reserve_cma(void)
-{
-}
-
-#endif
-
-int __init da8xx_register_rproc(void)
-{
-	int ret;
-
-	if (!rproc_mem_inited) {
-		pr_warn("%s: memory not reserved for DSP, not registering DSP device\n",
-			__func__);
-		return -ENOMEM;
-	}
-
-	ret = platform_device_register(&da8xx_dsp);
-	if (ret)
-		pr_err("%s: can't register DSP device: %d\n", __func__, ret);
-
-	return ret;
-};
-
-static struct resource da8xx_rtc_resources[] = {
-	{
-		.start		= DA8XX_RTC_BASE,
-		.end		= DA8XX_RTC_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{ /* timer irq */
-		.start		= DAVINCI_INTC_IRQ(IRQ_DA8XX_RTC),
-		.end		= DAVINCI_INTC_IRQ(IRQ_DA8XX_RTC),
-		.flags		= IORESOURCE_IRQ,
-	},
-	{ /* alarm irq */
-		.start		= DAVINCI_INTC_IRQ(IRQ_DA8XX_RTC),
-		.end		= DAVINCI_INTC_IRQ(IRQ_DA8XX_RTC),
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device da8xx_rtc_device = {
-	.name           = "da830-rtc",
-	.id             = -1,
-	.num_resources	= ARRAY_SIZE(da8xx_rtc_resources),
-	.resource	= da8xx_rtc_resources,
-};
-
-int da8xx_register_rtc(void)
-{
-	return platform_device_register(&da8xx_rtc_device);
-}
-
 static void __iomem *da8xx_ddr2_ctlr_base;
 void __iomem * __init da8xx_get_mem_ctlr(void)
 {
@@ -974,192 +68,3 @@ void __iomem * __init da8xx_get_mem_ctlr(void)
 
 	return da8xx_ddr2_ctlr_base;
 }
-
-static struct resource da8xx_cpuidle_resources[] = {
-	{
-		.start		= DA8XX_DDR2_CTL_BASE,
-		.end		= DA8XX_DDR2_CTL_BASE + SZ_32K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-/* DA8XX devices support DDR2 power down */
-static struct davinci_cpuidle_config da8xx_cpuidle_pdata = {
-	.ddr2_pdown	= 1,
-};
-
-
-static struct platform_device da8xx_cpuidle_device = {
-	.name			= "cpuidle-davinci",
-	.num_resources		= ARRAY_SIZE(da8xx_cpuidle_resources),
-	.resource		= da8xx_cpuidle_resources,
-	.dev = {
-		.platform_data	= &da8xx_cpuidle_pdata,
-	},
-};
-
-int __init da8xx_register_cpuidle(void)
-{
-	da8xx_cpuidle_pdata.ddr2_ctlr_base = da8xx_get_mem_ctlr();
-
-	return platform_device_register(&da8xx_cpuidle_device);
-}
-
-static struct resource da8xx_spi0_resources[] = {
-	[0] = {
-		.start	= DA8XX_SPI0_BASE,
-		.end	= DA8XX_SPI0_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_SPINT0),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_SPINT0),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource da8xx_spi1_resources[] = {
-	[0] = {
-		.start	= DA830_SPI1_BASE,
-		.end	= DA830_SPI1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_SPINT1),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_SPINT1),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct davinci_spi_platform_data da8xx_spi_pdata[] = {
-	[0] = {
-		.version	= SPI_VERSION_2,
-		.intr_line	= 1,
-		.dma_event_q	= EVENTQ_0,
-		.prescaler_limit = 2,
-	},
-	[1] = {
-		.version	= SPI_VERSION_2,
-		.intr_line	= 1,
-		.dma_event_q	= EVENTQ_0,
-		.prescaler_limit = 2,
-	},
-};
-
-static struct platform_device da8xx_spi_device[] = {
-	[0] = {
-		.name		= "spi_davinci",
-		.id		= 0,
-		.num_resources	= ARRAY_SIZE(da8xx_spi0_resources),
-		.resource	= da8xx_spi0_resources,
-		.dev		= {
-			.platform_data = &da8xx_spi_pdata[0],
-		},
-	},
-	[1] = {
-		.name		= "spi_davinci",
-		.id		= 1,
-		.num_resources	= ARRAY_SIZE(da8xx_spi1_resources),
-		.resource	= da8xx_spi1_resources,
-		.dev		= {
-			.platform_data = &da8xx_spi_pdata[1],
-		},
-	},
-};
-
-int __init da8xx_register_spi_bus(int instance, unsigned num_chipselect)
-{
-	if (instance < 0 || instance > 1)
-		return -EINVAL;
-
-	da8xx_spi_pdata[instance].num_chipselect = num_chipselect;
-
-	if (instance == 1 && cpu_is_davinci_da850()) {
-		da8xx_spi1_resources[0].start = DA850_SPI1_BASE;
-		da8xx_spi1_resources[0].end = DA850_SPI1_BASE + SZ_4K - 1;
-	}
-
-	return platform_device_register(&da8xx_spi_device[instance]);
-}
-
-#ifdef CONFIG_ARCH_DAVINCI_DA850
-int __init da850_register_sata_refclk(int rate)
-{
-	struct clk *clk;
-
-	clk = clk_register_fixed_rate(NULL, "sata_refclk", NULL, 0, rate);
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
-
-	return clk_register_clkdev(clk, "refclk", "ahci_da850");
-}
-
-static struct resource da850_sata_resources[] = {
-	{
-		.start	= DA850_SATA_BASE,
-		.end	= DA850_SATA_BASE + 0x1fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DA8XX_SYSCFG1_BASE + DA8XX_PWRDN_REG,
-		.end	= DA8XX_SYSCFG1_BASE + DA8XX_PWRDN_REG + 0x3,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA850_SATAINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 da850_sata_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device da850_sata_device = {
-	.name	= "ahci_da850",
-	.id	= -1,
-	.dev	= {
-		.dma_mask		= &da850_sata_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(da850_sata_resources),
-	.resource	= da850_sata_resources,
-};
-
-int __init da850_register_sata(unsigned long refclkpn)
-{
-	int ret;
-
-	ret = da850_register_sata_refclk(refclkpn);
-	if (ret)
-		return ret;
-
-	return platform_device_register(&da850_sata_device);
-}
-#endif
-
-static struct regmap *da8xx_cfgchip;
-
-static const struct regmap_config da8xx_cfgchip_config __initconst = {
-	.name		= "cfgchip",
-	.reg_bits	= 32,
-	.val_bits	= 32,
-	.reg_stride	= 4,
-	.max_register	= DA8XX_CFGCHIP4_REG - DA8XX_CFGCHIP0_REG,
-};
-
-/**
- * da8xx_get_cfgchip - Lazy gets CFGCHIP as regmap
- *
- * This is for use on non-DT boards only. For DT boards, use
- * syscon_regmap_lookup_by_compatible("ti,da830-cfgchip")
- *
- * Returns: Pointer to the CFGCHIP regmap or negative error code.
- */
-struct regmap * __init da8xx_get_cfgchip(void)
-{
-	if (IS_ERR_OR_NULL(da8xx_cfgchip))
-		da8xx_cfgchip = regmap_init_mmio(NULL,
-					DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP0_REG),
-					&da8xx_cfgchip_config);
-
-	return da8xx_cfgchip;
-}
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
deleted file mode 100644
index 199c26d9a2b6..000000000000
--- a/arch/arm/mach-davinci/devices.c
+++ /dev/null
@@ -1,303 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * mach-davinci/devices.c
- *
- * DaVinci platform device setup/initialization
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/i2c-davinci.h>
-#include <linux/platform_data/mmc-davinci.h>
-#include <linux/platform_data/edma.h>
-#include <linux/dma-mapping.h>
-#include <linux/io.h>
-#include <linux/reboot.h>
-
-#include "hardware.h"
-#include "cputype.h"
-#include "mux.h"
-#include "davinci.h"
-#include "irqs.h"
-
-#define DAVINCI_I2C_BASE	     0x01C21000
-#define DAVINCI_ATA_BASE	     0x01C66000
-#define DAVINCI_MMCSD0_BASE	     0x01E10000
-#define DM355_MMCSD0_BASE	     0x01E11000
-#define DM355_MMCSD1_BASE	     0x01E00000
-#define DM365_MMCSD0_BASE	     0x01D11000
-#define DM365_MMCSD1_BASE	     0x01D00000
-
-void __iomem  *davinci_sysmod_base;
-
-void davinci_map_sysmod(void)
-{
-	davinci_sysmod_base = ioremap(DAVINCI_SYSTEM_MODULE_BASE,
-					      0x800);
-	/*
-	 * Throw a bug since a lot of board initialization code depends
-	 * on system module availability. ioremap() failing this early
-	 * need careful looking into anyway.
-	 */
-	BUG_ON(!davinci_sysmod_base);
-}
-
-static struct resource i2c_resources[] = {
-	{
-		.start		= DAVINCI_I2C_BASE,
-		.end		= DAVINCI_I2C_BASE + 0x40,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= DAVINCI_INTC_IRQ(IRQ_I2C),
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device davinci_i2c_device = {
-	.name           = "i2c_davinci",
-	.id             = 1,
-	.num_resources	= ARRAY_SIZE(i2c_resources),
-	.resource	= i2c_resources,
-};
-
-void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata)
-{
-	if (cpu_is_davinci_dm644x())
-		davinci_cfg_reg(DM644X_I2C);
-
-	davinci_i2c_device.dev.platform_data = pdata;
-	(void) platform_device_register(&davinci_i2c_device);
-}
-
-static struct resource ide_resources[] = {
-	{
-		.start		= DAVINCI_ATA_BASE,
-		.end		= DAVINCI_ATA_BASE + 0x7ff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= DAVINCI_INTC_IRQ(IRQ_IDE),
-		.end		= DAVINCI_INTC_IRQ(IRQ_IDE),
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static u64 ide_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ide_device = {
-	.name           = "palm_bk3710",
-	.id             = -1,
-	.resource       = ide_resources,
-	.num_resources  = ARRAY_SIZE(ide_resources),
-	.dev = {
-		.dma_mask		= &ide_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-};
-
-void __init davinci_init_ide(void)
-{
-	if (cpu_is_davinci_dm644x()) {
-		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
-		davinci_cfg_reg(DM644X_ATAEN);
-		davinci_cfg_reg(DM644X_HDIREN);
-	} else if (cpu_is_davinci_dm646x()) {
-		/* IRQ_DM646X_IDE is the same as IRQ_IDE */
-		davinci_cfg_reg(DM646X_ATAEN);
-	} else {
-		WARN_ON(1);
-		return;
-	}
-
-	platform_device_register(&ide_device);
-}
-
-#if IS_ENABLED(CONFIG_MMC_DAVINCI)
-
-static u64 mmcsd0_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource mmcsd0_resources[] = {
-	{
-		/* different on dm355 */
-		.start = DAVINCI_MMCSD0_BASE,
-		.end   = DAVINCI_MMCSD0_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	/* IRQs:  MMC/SD, then SDIO */
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_MMCINT),
-		.flags = IORESOURCE_IRQ,
-	}, {
-		/* different on dm355 */
-		.start = DAVINCI_INTC_IRQ(IRQ_SDIOINT),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device davinci_mmcsd0_device = {
-	.name = "dm6441-mmc",
-	.id = 0,
-	.dev = {
-		.dma_mask = &mmcsd0_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources = ARRAY_SIZE(mmcsd0_resources),
-	.resource = mmcsd0_resources,
-};
-
-static u64 mmcsd1_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource mmcsd1_resources[] = {
-	{
-		.start = DM355_MMCSD1_BASE,
-		.end   = DM355_MMCSD1_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	/* IRQs:  MMC/SD, then SDIO */
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_DM355_MMCINT1),
-		.flags = IORESOURCE_IRQ,
-	}, {
-		.start = DAVINCI_INTC_IRQ(IRQ_DM355_SDIOINT1),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device davinci_mmcsd1_device = {
-	.name = "dm6441-mmc",
-	.id = 1,
-	.dev = {
-		.dma_mask = &mmcsd1_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources = ARRAY_SIZE(mmcsd1_resources),
-	.resource = mmcsd1_resources,
-};
-
-
-void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
-{
-	struct platform_device	*pdev = NULL;
-
-	if (WARN_ON(cpu_is_davinci_dm646x()))
-		return;
-
-	/* REVISIT: update PINMUX, ARM_IRQMUX, and EDMA_EVTMUX here too;
-	 * for example if MMCSD1 is used for SDIO, maybe DAT2 is unused.
-	 *
-	 * FIXME dm6441 (no MMC/SD), dm357 (one), and dm335 (two) are
-	 * not handled right here ...
-	 */
-	switch (module) {
-	case 1:
-		if (cpu_is_davinci_dm355()) {
-			/* REVISIT we may not need all these pins if e.g. this
-			 * is a hard-wired SDIO device...
-			 */
-			davinci_cfg_reg(DM355_SD1_CMD);
-			davinci_cfg_reg(DM355_SD1_CLK);
-			davinci_cfg_reg(DM355_SD1_DATA0);
-			davinci_cfg_reg(DM355_SD1_DATA1);
-			davinci_cfg_reg(DM355_SD1_DATA2);
-			davinci_cfg_reg(DM355_SD1_DATA3);
-		} else if (cpu_is_davinci_dm365()) {
-			/* Configure pull down control */
-			unsigned v;
-
-			v = __raw_readl(DAVINCI_SYSMOD_VIRT(SYSMOD_PUPDCTL1));
-			__raw_writel(v & ~0xfc0,
-					DAVINCI_SYSMOD_VIRT(SYSMOD_PUPDCTL1));
-
-			mmcsd1_resources[0].start = DM365_MMCSD1_BASE;
-			mmcsd1_resources[0].end = DM365_MMCSD1_BASE +
-							SZ_4K - 1;
-			mmcsd1_resources[2].start = DAVINCI_INTC_IRQ(
-							IRQ_DM365_SDIOINT1);
-			davinci_mmcsd1_device.name = "da830-mmc";
-		} else
-			break;
-
-		pdev = &davinci_mmcsd1_device;
-		break;
-	case 0:
-		if (cpu_is_davinci_dm355()) {
-			mmcsd0_resources[0].start = DM355_MMCSD0_BASE;
-			mmcsd0_resources[0].end = DM355_MMCSD0_BASE + SZ_4K - 1;
-			mmcsd0_resources[2].start = DAVINCI_INTC_IRQ(
-							IRQ_DM355_SDIOINT0);
-
-			/* expose all 6 MMC0 signals:  CLK, CMD, DATA[0..3] */
-			davinci_cfg_reg(DM355_MMCSD0);
-
-			/* enable RX EDMA */
-			davinci_cfg_reg(DM355_EVT26_MMC0_RX);
-		} else if (cpu_is_davinci_dm365()) {
-			mmcsd0_resources[0].start = DM365_MMCSD0_BASE;
-			mmcsd0_resources[0].end = DM365_MMCSD0_BASE +
-							SZ_4K - 1;
-			mmcsd0_resources[2].start = DAVINCI_INTC_IRQ(
-							IRQ_DM365_SDIOINT0);
-			davinci_mmcsd0_device.name = "da830-mmc";
-		} else if (cpu_is_davinci_dm644x()) {
-			/* REVISIT: should this be in board-init code? */
-			/* Power-on 3.3V IO cells */
-			__raw_writel(0,
-				DAVINCI_SYSMOD_VIRT(SYSMOD_VDD3P3VPWDN));
-			/*Set up the pull regiter for MMC */
-			davinci_cfg_reg(DM644X_MSTK);
-		}
-
-		pdev = &davinci_mmcsd0_device;
-		break;
-	}
-
-	if (WARN_ON(!pdev))
-		return;
-
-	pdev->dev.platform_data = config;
-	platform_device_register(pdev);
-}
-
-#else
-
-void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
-{
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-static struct resource wdt_resources[] = {
-	{
-		.start	= DAVINCI_WDOG_BASE,
-		.end	= DAVINCI_WDOG_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device davinci_wdt_device = {
-	.name		= "davinci-wdt",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(wdt_resources),
-	.resource	= wdt_resources,
-};
-
-int davinci_init_wdt(void)
-{
-	return platform_device_register(&davinci_wdt_device);
-}
-
-static struct platform_device davinci_gpio_device = {
-	.name	= "davinci_gpio",
-	.id	= -1,
-};
-
-int davinci_gpio_register(struct resource *res, int size, void *pdata)
-{
-	davinci_gpio_device.resource = res;
-	davinci_gpio_device.num_resources = size;
-	davinci_gpio_device.dev.platform_data = pdata;
-	return platform_device_register(&davinci_gpio_device);
-}
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
deleted file mode 100644
index a12ba859beca..000000000000
--- a/arch/arm/mach-davinci/dm355.c
+++ /dev/null
@@ -1,832 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * TI DaVinci DM355 chip specific setup
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) Deep Root Systems, LLC.
- */
-
-#include <linux/clk-provider.h>
-#include <linux/clk/davinci.h>
-#include <linux/clkdev.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmaengine.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irqchip/irq-davinci-aintc.h>
-#include <linux/platform_data/edma.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/spi-davinci.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/spi/spi.h>
-
-#include <clocksource/timer-davinci.h>
-
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "cputype.h"
-#include "serial.h"
-#include "asp.h"
-#include "davinci.h"
-#include "irqs.h"
-#include "mux.h"
-
-#define DM355_UART2_BASE	(IO_PHYS + 0x206000)
-#define DM355_OSD_BASE		(IO_PHYS + 0x70200)
-#define DM355_VENC_BASE		(IO_PHYS + 0x70400)
-
-/*
- * Device specific clocks
- */
-#define DM355_REF_FREQ		24000000	/* 24 or 36 MHz */
-
-static u64 dm355_spi0_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource dm355_spi0_resources[] = {
-	{
-		.start = 0x01c66000,
-		.end   = 0x01c667ff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_DM355_SPINT0_0),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct davinci_spi_platform_data dm355_spi0_pdata = {
-	.version 	= SPI_VERSION_1,
-	.num_chipselect = 2,
-	.cshold_bug	= true,
-	.dma_event_q	= EVENTQ_1,
-	.prescaler_limit = 1,
-};
-static struct platform_device dm355_spi0_device = {
-	.name = "spi_davinci",
-	.id = 0,
-	.dev = {
-		.dma_mask = &dm355_spi0_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &dm355_spi0_pdata,
-	},
-	.num_resources = ARRAY_SIZE(dm355_spi0_resources),
-	.resource = dm355_spi0_resources,
-};
-
-void __init dm355_init_spi0(unsigned chipselect_mask,
-		const struct spi_board_info *info, unsigned len)
-{
-	/* for now, assume we need MISO */
-	davinci_cfg_reg(DM355_SPI0_SDI);
-
-	/* not all slaves will be wired up */
-	if (chipselect_mask & BIT(0))
-		davinci_cfg_reg(DM355_SPI0_SDENA0);
-	if (chipselect_mask & BIT(1))
-		davinci_cfg_reg(DM355_SPI0_SDENA1);
-
-	spi_register_board_info(info, len);
-
-	platform_device_register(&dm355_spi0_device);
-}
-
-/*----------------------------------------------------------------------*/
-
-#define INTMUX		0x18
-#define EVTMUX		0x1c
-
-/*
- * Device specific mux setup
- *
- *	soc	description	mux  mode   mode  mux	 dbg
- *				reg  offset mask  mode
- */
-static const struct mux_config dm355_pins[] = {
-#ifdef CONFIG_DAVINCI_MUX
-MUX_CFG(DM355,	MMCSD0,		4,   2,     1,	  0,	 false)
-
-MUX_CFG(DM355,	SD1_CLK,	3,   6,     1,	  1,	 false)
-MUX_CFG(DM355,	SD1_CMD,	3,   7,     1,	  1,	 false)
-MUX_CFG(DM355,	SD1_DATA3,	3,   8,     3,	  1,	 false)
-MUX_CFG(DM355,	SD1_DATA2,	3,   10,    3,	  1,	 false)
-MUX_CFG(DM355,	SD1_DATA1,	3,   12,    3,	  1,	 false)
-MUX_CFG(DM355,	SD1_DATA0,	3,   14,    3,	  1,	 false)
-
-MUX_CFG(DM355,	I2C_SDA,	3,   19,    1,	  1,	 false)
-MUX_CFG(DM355,	I2C_SCL,	3,   20,    1,	  1,	 false)
-
-MUX_CFG(DM355,	MCBSP0_BDX,	3,   0,     1,	  1,	 false)
-MUX_CFG(DM355,	MCBSP0_X,	3,   1,     1,	  1,	 false)
-MUX_CFG(DM355,	MCBSP0_BFSX,	3,   2,     1,	  1,	 false)
-MUX_CFG(DM355,	MCBSP0_BDR,	3,   3,     1,	  1,	 false)
-MUX_CFG(DM355,	MCBSP0_R,	3,   4,     1,	  1,	 false)
-MUX_CFG(DM355,	MCBSP0_BFSR,	3,   5,     1,	  1,	 false)
-
-MUX_CFG(DM355,	SPI0_SDI,	4,   1,     1,    0,	 false)
-MUX_CFG(DM355,	SPI0_SDENA0,	4,   0,     1,    0,	 false)
-MUX_CFG(DM355,	SPI0_SDENA1,	3,   28,    1,    1,	 false)
-
-INT_CFG(DM355,  INT_EDMA_CC,	      2,    1,    1,     false)
-INT_CFG(DM355,  INT_EDMA_TC0_ERR,     3,    1,    1,     false)
-INT_CFG(DM355,  INT_EDMA_TC1_ERR,     4,    1,    1,     false)
-
-EVT_CFG(DM355,  EVT8_ASP1_TX,	      0,    1,    0,     false)
-EVT_CFG(DM355,  EVT9_ASP1_RX,	      1,    1,    0,     false)
-EVT_CFG(DM355,  EVT26_MMC0_RX,	      2,    1,    0,     false)
-
-MUX_CFG(DM355,	VOUT_FIELD,	1,   18,    3,	  1,	 false)
-MUX_CFG(DM355,	VOUT_FIELD_G70,	1,   18,    3,	  0,	 false)
-MUX_CFG(DM355,	VOUT_HVSYNC,	1,   16,    1,	  0,	 false)
-MUX_CFG(DM355,	VOUT_COUTL_EN,	1,   0,     0xff, 0x55,  false)
-MUX_CFG(DM355,	VOUT_COUTH_EN,	1,   8,     0xff, 0x55,  false)
-
-MUX_CFG(DM355,	VIN_PCLK,	0,   14,    1,    1,	 false)
-MUX_CFG(DM355,	VIN_CAM_WEN,	0,   13,    1,    1,	 false)
-MUX_CFG(DM355,	VIN_CAM_VD,	0,   12,    1,    1,	 false)
-MUX_CFG(DM355,	VIN_CAM_HD,	0,   11,    1,    1,	 false)
-MUX_CFG(DM355,	VIN_YIN_EN,	0,   10,    1,    1,	 false)
-MUX_CFG(DM355,	VIN_CINL_EN,	0,   0,   0xff, 0x55,	 false)
-MUX_CFG(DM355,	VIN_CINH_EN,	0,   8,     3,    3,	 false)
-#endif
-};
-
-static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
-	[IRQ_DM355_CCDC_VDINT0]		= 2,
-	[IRQ_DM355_CCDC_VDINT1]		= 6,
-	[IRQ_DM355_CCDC_VDINT2]		= 6,
-	[IRQ_DM355_IPIPE_HST]		= 6,
-	[IRQ_DM355_H3AINT]		= 6,
-	[IRQ_DM355_IPIPE_SDR]		= 6,
-	[IRQ_DM355_IPIPEIFINT]		= 6,
-	[IRQ_DM355_OSDINT]		= 7,
-	[IRQ_DM355_VENCINT]		= 6,
-	[IRQ_ASQINT]			= 6,
-	[IRQ_IMXINT]			= 6,
-	[IRQ_USBINT]			= 4,
-	[IRQ_DM355_RTOINT]		= 4,
-	[IRQ_DM355_UARTINT2]		= 7,
-	[IRQ_DM355_TINT6]		= 7,
-	[IRQ_CCINT0]			= 5,	/* dma */
-	[IRQ_CCERRINT]			= 5,	/* dma */
-	[IRQ_TCERRINT0]			= 5,	/* dma */
-	[IRQ_TCERRINT]			= 5,	/* dma */
-	[IRQ_DM355_SPINT2_1]		= 7,
-	[IRQ_DM355_TINT7]		= 4,
-	[IRQ_DM355_SDIOINT0]		= 7,
-	[IRQ_MBXINT]			= 7,
-	[IRQ_MBRINT]			= 7,
-	[IRQ_MMCINT]			= 7,
-	[IRQ_DM355_MMCINT1]		= 7,
-	[IRQ_DM355_PWMINT3]		= 7,
-	[IRQ_DDRINT]			= 7,
-	[IRQ_AEMIFINT]			= 7,
-	[IRQ_DM355_SDIOINT1]		= 4,
-	[IRQ_TINT0_TINT12]		= 2,	/* clockevent */
-	[IRQ_TINT0_TINT34]		= 2,	/* clocksource */
-	[IRQ_TINT1_TINT12]		= 7,	/* DSP timer */
-	[IRQ_TINT1_TINT34]		= 7,	/* system tick */
-	[IRQ_PWMINT0]			= 7,
-	[IRQ_PWMINT1]			= 7,
-	[IRQ_PWMINT2]			= 7,
-	[IRQ_I2C]			= 3,
-	[IRQ_UARTINT0]			= 3,
-	[IRQ_UARTINT1]			= 3,
-	[IRQ_DM355_SPINT0_0]		= 3,
-	[IRQ_DM355_SPINT0_1]		= 3,
-	[IRQ_DM355_GPIO0]		= 3,
-	[IRQ_DM355_GPIO1]		= 7,
-	[IRQ_DM355_GPIO2]		= 4,
-	[IRQ_DM355_GPIO3]		= 4,
-	[IRQ_DM355_GPIO4]		= 7,
-	[IRQ_DM355_GPIO5]		= 7,
-	[IRQ_DM355_GPIO6]		= 7,
-	[IRQ_DM355_GPIO7]		= 7,
-	[IRQ_DM355_GPIO8]		= 7,
-	[IRQ_DM355_GPIO9]		= 7,
-	[IRQ_DM355_GPIOBNK0]		= 7,
-	[IRQ_DM355_GPIOBNK1]		= 7,
-	[IRQ_DM355_GPIOBNK2]		= 7,
-	[IRQ_DM355_GPIOBNK3]		= 7,
-	[IRQ_DM355_GPIOBNK4]		= 7,
-	[IRQ_DM355_GPIOBNK5]		= 7,
-	[IRQ_DM355_GPIOBNK6]		= 7,
-	[IRQ_COMMTX]			= 7,
-	[IRQ_COMMRX]			= 7,
-	[IRQ_EMUINT]			= 7,
-};
-
-/*----------------------------------------------------------------------*/
-
-static s8 queue_priority_mapping[][2] = {
-	/* {event queue no, Priority} */
-	{0, 3},
-	{1, 7},
-	{-1, -1},
-};
-
-static const struct dma_slave_map dm355_edma_map[] = {
-	{ "davinci-mcbsp.0", "tx", EDMA_FILTER_PARAM(0, 2) },
-	{ "davinci-mcbsp.0", "rx", EDMA_FILTER_PARAM(0, 3) },
-	{ "davinci-mcbsp.1", "tx", EDMA_FILTER_PARAM(0, 8) },
-	{ "davinci-mcbsp.1", "rx", EDMA_FILTER_PARAM(0, 9) },
-	{ "spi_davinci.2", "tx", EDMA_FILTER_PARAM(0, 10) },
-	{ "spi_davinci.2", "rx", EDMA_FILTER_PARAM(0, 11) },
-	{ "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 14) },
-	{ "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 15) },
-	{ "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 16) },
-	{ "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 17) },
-	{ "dm6441-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) },
-	{ "dm6441-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) },
-	{ "dm6441-mmc.1", "rx", EDMA_FILTER_PARAM(0, 30) },
-	{ "dm6441-mmc.1", "tx", EDMA_FILTER_PARAM(0, 31) },
-};
-
-static struct edma_soc_info dm355_edma_pdata = {
-	.queue_priority_mapping	= queue_priority_mapping,
-	.default_queue		= EVENTQ_1,
-	.slave_map		= dm355_edma_map,
-	.slavecnt		= ARRAY_SIZE(dm355_edma_map),
-};
-
-static struct resource edma_resources[] = {
-	{
-		.name	= "edma3_cc",
-		.start	= 0x01c00000,
-		.end	= 0x01c00000 + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc0",
-		.start	= 0x01c10000,
-		.end	= 0x01c10000 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc1",
-		.start	= 0x01c10400,
-		.end	= 0x01c10400 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_ccint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_CCINT0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma3_ccerrint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_CCERRINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-	/* not using (or muxing) TC*_ERR */
-};
-
-static const struct platform_device_info dm355_edma_device __initconst = {
-	.name		= "edma",
-	.id		= 0,
-	.dma_mask	= DMA_BIT_MASK(32),
-	.res		= edma_resources,
-	.num_res	= ARRAY_SIZE(edma_resources),
-	.data		= &dm355_edma_pdata,
-	.size_data	= sizeof(dm355_edma_pdata),
-};
-
-static struct resource dm355_asp1_resources[] = {
-	{
-		.name	= "mpu",
-		.start	= DAVINCI_ASP1_BASE,
-		.end	= DAVINCI_ASP1_BASE + SZ_8K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_DMA_ASP1_TX,
-		.end	= DAVINCI_DMA_ASP1_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.start	= DAVINCI_DMA_ASP1_RX,
-		.end	= DAVINCI_DMA_ASP1_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device dm355_asp1_device = {
-	.name		= "davinci-mcbsp",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(dm355_asp1_resources),
-	.resource	= dm355_asp1_resources,
-};
-
-static void dm355_ccdc_setup_pinmux(void)
-{
-	davinci_cfg_reg(DM355_VIN_PCLK);
-	davinci_cfg_reg(DM355_VIN_CAM_WEN);
-	davinci_cfg_reg(DM355_VIN_CAM_VD);
-	davinci_cfg_reg(DM355_VIN_CAM_HD);
-	davinci_cfg_reg(DM355_VIN_YIN_EN);
-	davinci_cfg_reg(DM355_VIN_CINL_EN);
-	davinci_cfg_reg(DM355_VIN_CINH_EN);
-}
-
-static struct resource dm355_vpss_resources[] = {
-	{
-		/* VPSS BL Base address */
-		.name		= "vpss",
-		.start          = 0x01c70800,
-		.end            = 0x01c70800 + 0xff,
-		.flags          = IORESOURCE_MEM,
-	},
-	{
-		/* VPSS CLK Base address */
-		.name		= "vpss",
-		.start          = 0x01c70000,
-		.end            = 0x01c70000 + 0xf,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm355_vpss_device = {
-	.name			= "vpss",
-	.id			= -1,
-	.dev.platform_data	= "dm355_vpss",
-	.num_resources		= ARRAY_SIZE(dm355_vpss_resources),
-	.resource		= dm355_vpss_resources,
-};
-
-static struct resource vpfe_resources[] = {
-	{
-		.start          = DAVINCI_INTC_IRQ(IRQ_VDINT0),
-		.end            = DAVINCI_INTC_IRQ(IRQ_VDINT0),
-		.flags          = IORESOURCE_IRQ,
-	},
-	{
-		.start          = DAVINCI_INTC_IRQ(IRQ_VDINT1),
-		.end            = DAVINCI_INTC_IRQ(IRQ_VDINT1),
-		.flags          = IORESOURCE_IRQ,
-	},
-};
-
-static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
-static struct resource dm355_ccdc_resource[] = {
-	/* CCDC Base address */
-	{
-		.flags          = IORESOURCE_MEM,
-		.start          = 0x01c70600,
-		.end            = 0x01c70600 + 0x1ff,
-	},
-};
-static struct platform_device dm355_ccdc_dev = {
-	.name           = "dm355_ccdc",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(dm355_ccdc_resource),
-	.resource       = dm355_ccdc_resource,
-	.dev = {
-		.dma_mask               = &vpfe_capture_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-		.platform_data		= dm355_ccdc_setup_pinmux,
-	},
-};
-
-static struct platform_device vpfe_capture_dev = {
-	.name		= CAPTURE_DRV_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(vpfe_resources),
-	.resource	= vpfe_resources,
-	.dev = {
-		.dma_mask		= &vpfe_capture_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static struct resource dm355_osd_resources[] = {
-	{
-		.start	= DM355_OSD_BASE,
-		.end	= DM355_OSD_BASE + 0x17f,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm355_osd_dev = {
-	.name		= DM355_VPBE_OSD_SUBDEV_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm355_osd_resources),
-	.resource	= dm355_osd_resources,
-	.dev		= {
-		.dma_mask		= &vpfe_capture_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static struct resource dm355_venc_resources[] = {
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.end	= DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-	/* venc registers io space */
-	{
-		.start	= DM355_VENC_BASE,
-		.end	= DM355_VENC_BASE + 0x17f,
-		.flags	= IORESOURCE_MEM,
-	},
-	/* VDAC config register io space */
-	{
-		.start	= DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG,
-		.end	= DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG + 3,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource dm355_v4l2_disp_resources[] = {
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.end	= DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-	/* venc registers io space */
-	{
-		.start	= DM355_VENC_BASE,
-		.end	= DM355_VENC_BASE + 0x17f,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static int dm355_vpbe_setup_pinmux(u32 if_type, int field)
-{
-	switch (if_type) {
-	case MEDIA_BUS_FMT_SGRBG8_1X8:
-		davinci_cfg_reg(DM355_VOUT_FIELD_G70);
-		break;
-	case MEDIA_BUS_FMT_YUYV10_1X20:
-		if (field)
-			davinci_cfg_reg(DM355_VOUT_FIELD);
-		else
-			davinci_cfg_reg(DM355_VOUT_FIELD_G70);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	davinci_cfg_reg(DM355_VOUT_COUTL_EN);
-	davinci_cfg_reg(DM355_VOUT_COUTH_EN);
-
-	return 0;
-}
-
-static int dm355_venc_setup_clock(enum vpbe_enc_timings_type type,
-				   unsigned int pclock)
-{
-	void __iomem *vpss_clk_ctrl_reg;
-
-	vpss_clk_ctrl_reg = DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL);
-
-	switch (type) {
-	case VPBE_ENC_STD:
-		writel(VPSS_DACCLKEN_ENABLE | VPSS_VENCCLKEN_ENABLE,
-		       vpss_clk_ctrl_reg);
-		break;
-	case VPBE_ENC_DV_TIMINGS:
-		if (pclock > 27000000)
-			/*
-			 * For HD, use external clock source since we cannot
-			 * support HD mode with internal clocks.
-			 */
-			writel(VPSS_MUXSEL_EXTCLK_ENABLE, vpss_clk_ctrl_reg);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct platform_device dm355_vpbe_display = {
-	.name		= "vpbe-v4l2",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm355_v4l2_disp_resources),
-	.resource	= dm355_v4l2_disp_resources,
-	.dev		= {
-		.dma_mask		= &vpfe_capture_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static struct venc_platform_data dm355_venc_pdata = {
-	.setup_pinmux	= dm355_vpbe_setup_pinmux,
-	.setup_clock	= dm355_venc_setup_clock,
-};
-
-static struct platform_device dm355_venc_dev = {
-	.name		= DM355_VPBE_VENC_SUBDEV_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm355_venc_resources),
-	.resource	= dm355_venc_resources,
-	.dev		= {
-		.dma_mask		= &vpfe_capture_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= (void *)&dm355_venc_pdata,
-	},
-};
-
-static struct platform_device dm355_vpbe_dev = {
-	.name		= "vpbe_controller",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &vpfe_capture_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static struct resource dm355_gpio_resources[] = {
-	{	/* registers */
-		.start	= DAVINCI_GPIO_BASE,
-		.end	= DAVINCI_GPIO_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{	/* interrupt */
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK0),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK1),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK1),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK2),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK2),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK3),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK3),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK4),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK4),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK5),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK5),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK6),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM355_GPIOBNK6),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct davinci_gpio_platform_data dm355_gpio_platform_data = {
-	.no_auto_base	= true,
-	.base		= 0,
-	.ngpio		= 104,
-};
-
-int __init dm355_gpio_register(void)
-{
-	return davinci_gpio_register(dm355_gpio_resources,
-				     ARRAY_SIZE(dm355_gpio_resources),
-				     &dm355_gpio_platform_data);
-}
-/*----------------------------------------------------------------------*/
-
-static struct map_desc dm355_io_desc[] = {
-	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-/* Contents of JTAG ID register used to identify exact cpu type */
-static struct davinci_id dm355_ids[] = {
-	{
-		.variant	= 0x0,
-		.part_no	= 0xb73b,
-		.manufacturer	= 0x00f,
-		.cpu_id		= DAVINCI_CPU_ID_DM355,
-		.name		= "dm355",
-	},
-};
-
-/*
- * Bottom half of timer0 is used for clockevent, top half is used for
- * clocksource.
- */
-static const struct davinci_timer_cfg dm355_timer_cfg = {
-	.reg = DEFINE_RES_IO(DAVINCI_TIMER0_BASE, SZ_4K),
-	.irq = {
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT12)),
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT34)),
-	},
-};
-
-static struct plat_serial8250_port dm355_serial0_platform_data[] = {
-	{
-		.mapbase	= DAVINCI_UART0_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_UARTINT0),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-static struct plat_serial8250_port dm355_serial1_platform_data[] = {
-	{
-		.mapbase	= DAVINCI_UART1_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_UARTINT1),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-static struct plat_serial8250_port dm355_serial2_platform_data[] = {
-	{
-		.mapbase	= DM355_UART2_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_DM355_UARTINT2),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-
-struct platform_device dm355_serial_device[] = {
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM,
-		.dev			= {
-			.platform_data	= dm355_serial0_platform_data,
-		}
-	},
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM1,
-		.dev			= {
-			.platform_data	= dm355_serial1_platform_data,
-		}
-	},
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM2,
-		.dev			= {
-			.platform_data	= dm355_serial2_platform_data,
-		}
-	},
-	{
-	}
-};
-
-static const struct davinci_soc_info davinci_soc_info_dm355 = {
-	.io_desc		= dm355_io_desc,
-	.io_desc_num		= ARRAY_SIZE(dm355_io_desc),
-	.jtag_id_reg		= 0x01c40028,
-	.ids			= dm355_ids,
-	.ids_num		= ARRAY_SIZE(dm355_ids),
-	.pinmux_base		= DAVINCI_SYSTEM_MODULE_BASE,
-	.pinmux_pins		= dm355_pins,
-	.pinmux_pins_num	= ARRAY_SIZE(dm355_pins),
-	.sram_dma		= 0x00010000,
-	.sram_len		= SZ_32K,
-};
-
-void __init dm355_init_asp1(u32 evt_enable)
-{
-	/* we don't use ASP1 IRQs, or we'd need to mux them ... */
-	if (evt_enable & ASP1_TX_EVT_EN)
-		davinci_cfg_reg(DM355_EVT8_ASP1_TX);
-
-	if (evt_enable & ASP1_RX_EVT_EN)
-		davinci_cfg_reg(DM355_EVT9_ASP1_RX);
-
-	platform_device_register(&dm355_asp1_device);
-}
-
-void __init dm355_init(void)
-{
-	davinci_common_init(&davinci_soc_info_dm355);
-	davinci_map_sysmod();
-}
-
-void __init dm355_init_time(void)
-{
-	void __iomem *pll1, *psc;
-	struct clk *clk;
-	int rv;
-
-	clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DM355_REF_FREQ);
-
-	pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K);
-	dm355_pll1_init(NULL, pll1, NULL);
-
-	psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K);
-	dm355_psc_init(NULL, psc);
-
-	clk = clk_get(NULL, "timer0");
-	if (WARN_ON(IS_ERR(clk))) {
-		pr_err("Unable to get the timer clock\n");
-		return;
-	}
-
-	rv = davinci_timer_register(clk, &dm355_timer_cfg);
-	WARN(rv, "Unable to register the timer: %d\n", rv);
-}
-
-static struct resource dm355_pll2_resources[] = {
-	{
-		.start	= DAVINCI_PLL2_BASE,
-		.end	= DAVINCI_PLL2_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm355_pll2_device = {
-	.name		= "dm355-pll2",
-	.id		= -1,
-	.resource	= dm355_pll2_resources,
-	.num_resources	= ARRAY_SIZE(dm355_pll2_resources),
-};
-
-void __init dm355_register_clocks(void)
-{
-	/* PLL1 and PSC are registered in dm355_init_time() */
-	platform_device_register(&dm355_pll2_device);
-}
-
-int __init dm355_init_video(struct vpfe_config *vpfe_cfg,
-				struct vpbe_config *vpbe_cfg)
-{
-	if (vpfe_cfg || vpbe_cfg)
-		platform_device_register(&dm355_vpss_device);
-
-	if (vpfe_cfg) {
-		vpfe_capture_dev.dev.platform_data = vpfe_cfg;
-		platform_device_register(&dm355_ccdc_dev);
-		platform_device_register(&vpfe_capture_dev);
-	}
-
-	if (vpbe_cfg) {
-		dm355_vpbe_dev.dev.platform_data = vpbe_cfg;
-		platform_device_register(&dm355_osd_dev);
-		platform_device_register(&dm355_venc_dev);
-		platform_device_register(&dm355_vpbe_dev);
-		platform_device_register(&dm355_vpbe_display);
-	}
-
-	return 0;
-}
-
-static const struct davinci_aintc_config dm355_aintc_config = {
-	.reg = {
-		.start		= DAVINCI_ARM_INTC_BASE,
-		.end		= DAVINCI_ARM_INTC_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	.num_irqs		= 64,
-	.prios			= dm355_default_priorities,
-};
-
-void __init dm355_init_irq(void)
-{
-	davinci_aintc_init(&dm355_aintc_config);
-}
-
-static int __init dm355_init_devices(void)
-{
-	struct platform_device *edma_pdev;
-	int ret = 0;
-
-	if (!cpu_is_davinci_dm355())
-		return 0;
-
-	davinci_cfg_reg(DM355_INT_EDMA_CC);
-	edma_pdev = platform_device_register_full(&dm355_edma_device);
-	if (IS_ERR(edma_pdev)) {
-		pr_warn("%s: Failed to register eDMA\n", __func__);
-		return PTR_ERR(edma_pdev);
-	}
-
-	ret = davinci_init_wdt();
-	if (ret)
-		pr_warn("%s: watchdog init failed: %d\n", __func__, ret);
-
-	return ret;
-}
-postcore_initcall(dm355_init_devices);
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
deleted file mode 100644
index 7538bb87f373..000000000000
--- a/arch/arm/mach-davinci/dm365.c
+++ /dev/null
@@ -1,1094 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * TI DaVinci DM365 chip specific setup
- *
- * Copyright (C) 2009 Texas Instruments
- */
-
-#include <linux/clk-provider.h>
-#include <linux/clk/davinci.h>
-#include <linux/clkdev.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmaengine.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irqchip/irq-davinci-aintc.h>
-#include <linux/platform_data/edma.h>
-#include <linux/platform_data/gpio-davinci.h>
-#include <linux/platform_data/keyscan-davinci.h>
-#include <linux/platform_data/spi-davinci.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/spi/spi.h>
-
-#include <clocksource/timer-davinci.h>
-
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "cputype.h"
-#include "serial.h"
-#include "asp.h"
-#include "davinci.h"
-#include "irqs.h"
-#include "mux.h"
-
-#define DM365_REF_FREQ		24000000	/* 24 MHz on the DM365 EVM */
-#define DM365_RTC_BASE			0x01c69000
-#define DM365_KEYSCAN_BASE		0x01c69400
-#define DM365_OSD_BASE			0x01c71c00
-#define DM365_VENC_BASE			0x01c71e00
-#define DAVINCI_DM365_VC_BASE		0x01d0c000
-#define DAVINCI_DMA_VC_TX		2
-#define DAVINCI_DMA_VC_RX		3
-#define DM365_EMAC_BASE			0x01d07000
-#define DM365_EMAC_MDIO_BASE		(DM365_EMAC_BASE + 0x4000)
-#define DM365_EMAC_CNTRL_OFFSET		0x0000
-#define DM365_EMAC_CNTRL_MOD_OFFSET	0x3000
-#define DM365_EMAC_CNTRL_RAM_OFFSET	0x1000
-#define DM365_EMAC_CNTRL_RAM_SIZE	0x2000
-
-#define INTMUX		0x18
-#define EVTMUX		0x1c
-
-
-static const struct mux_config dm365_pins[] = {
-#ifdef CONFIG_DAVINCI_MUX
-MUX_CFG(DM365,	MMCSD0,		0,   24,     1,	  0,	 false)
-
-MUX_CFG(DM365,	SD1_CLK,	0,   16,    3,	  1,	 false)
-MUX_CFG(DM365,	SD1_CMD,	4,   30,    3,	  1,	 false)
-MUX_CFG(DM365,	SD1_DATA3,	4,   28,    3,	  1,	 false)
-MUX_CFG(DM365,	SD1_DATA2,	4,   26,    3,	  1,	 false)
-MUX_CFG(DM365,	SD1_DATA1,	4,   24,    3,	  1,	 false)
-MUX_CFG(DM365,	SD1_DATA0,	4,   22,    3,	  1,	 false)
-
-MUX_CFG(DM365,	I2C_SDA,	3,   23,    3,	  2,	 false)
-MUX_CFG(DM365,	I2C_SCL,	3,   21,    3,	  2,	 false)
-
-MUX_CFG(DM365,	AEMIF_AR_A14,	2,   0,     3,	  1,	 false)
-MUX_CFG(DM365,	AEMIF_AR_BA0,	2,   0,     3,	  2,	 false)
-MUX_CFG(DM365,	AEMIF_A3,	2,   2,     3,	  1,	 false)
-MUX_CFG(DM365,	AEMIF_A7,	2,   4,     3,	  1,	 false)
-MUX_CFG(DM365,	AEMIF_D15_8,	2,   6,     1,	  1,	 false)
-MUX_CFG(DM365,	AEMIF_CE0,	2,   7,     1,	  0,	 false)
-MUX_CFG(DM365,	AEMIF_CE1,	2,   8,     1,    0,     false)
-MUX_CFG(DM365,	AEMIF_WE_OE,	2,   9,     1,    0,     false)
-
-MUX_CFG(DM365,	MCBSP0_BDX,	0,   23,    1,	  1,	 false)
-MUX_CFG(DM365,	MCBSP0_X,	0,   22,    1,	  1,	 false)
-MUX_CFG(DM365,	MCBSP0_BFSX,	0,   21,    1,	  1,	 false)
-MUX_CFG(DM365,	MCBSP0_BDR,	0,   20,    1,	  1,	 false)
-MUX_CFG(DM365,	MCBSP0_R,	0,   19,    1,	  1,	 false)
-MUX_CFG(DM365,	MCBSP0_BFSR,	0,   18,    1,	  1,	 false)
-
-MUX_CFG(DM365,	SPI0_SCLK,	3,   28,    1,    1,	 false)
-MUX_CFG(DM365,	SPI0_SDI,	3,   26,    3,    1,	 false)
-MUX_CFG(DM365,	SPI0_SDO,	3,   25,    1,    1,	 false)
-MUX_CFG(DM365,	SPI0_SDENA0,	3,   29,    3,    1,	 false)
-MUX_CFG(DM365,	SPI0_SDENA1,	3,   26,    3,    2,	 false)
-
-MUX_CFG(DM365,	UART0_RXD,	3,   20,    1,    1,	 false)
-MUX_CFG(DM365,	UART0_TXD,	3,   19,    1,    1,	 false)
-MUX_CFG(DM365,	UART1_RXD,	3,   17,    3,    2,	 false)
-MUX_CFG(DM365,	UART1_TXD,	3,   15,    3,    2,	 false)
-MUX_CFG(DM365,	UART1_RTS,	3,   23,    3,    1,	 false)
-MUX_CFG(DM365,	UART1_CTS,	3,   21,    3,    1,	 false)
-
-MUX_CFG(DM365,  EMAC_TX_EN,	3,   17,    3,    1,     false)
-MUX_CFG(DM365,  EMAC_TX_CLK,	3,   15,    3,    1,     false)
-MUX_CFG(DM365,  EMAC_COL,	3,   14,    1,    1,     false)
-MUX_CFG(DM365,  EMAC_TXD3,	3,   13,    1,    1,     false)
-MUX_CFG(DM365,  EMAC_TXD2,	3,   12,    1,    1,     false)
-MUX_CFG(DM365,  EMAC_TXD1,	3,   11,    1,    1,     false)
-MUX_CFG(DM365,  EMAC_TXD0,	3,   10,    1,    1,     false)
-MUX_CFG(DM365,  EMAC_RXD3,	3,   9,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_RXD2,	3,   8,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_RXD1,	3,   7,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_RXD0,	3,   6,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_RX_CLK,	3,   5,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_RX_DV,	3,   4,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_RX_ER,	3,   3,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_CRS,	3,   2,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_MDIO,	3,   1,     1,    1,     false)
-MUX_CFG(DM365,  EMAC_MDCLK,	3,   0,     1,    1,     false)
-
-MUX_CFG(DM365,	KEYSCAN,	2,   0,     0x3f, 0x3f,  false)
-
-MUX_CFG(DM365,	PWM0,		1,   0,     3,    2,     false)
-MUX_CFG(DM365,	PWM0_G23,	3,   26,    3,    3,     false)
-MUX_CFG(DM365,	PWM1,		1,   2,     3,    2,     false)
-MUX_CFG(DM365,	PWM1_G25,	3,   29,    3,    2,     false)
-MUX_CFG(DM365,	PWM2_G87,	1,   10,    3,    2,     false)
-MUX_CFG(DM365,	PWM2_G88,	1,   8,     3,    2,     false)
-MUX_CFG(DM365,	PWM2_G89,	1,   6,     3,    2,     false)
-MUX_CFG(DM365,	PWM2_G90,	1,   4,     3,    2,     false)
-MUX_CFG(DM365,	PWM3_G80,	1,   20,    3,    3,     false)
-MUX_CFG(DM365,	PWM3_G81,	1,   18,    3,    3,     false)
-MUX_CFG(DM365,	PWM3_G85,	1,   14,    3,    2,     false)
-MUX_CFG(DM365,	PWM3_G86,	1,   12,    3,    2,     false)
-
-MUX_CFG(DM365,	SPI1_SCLK,	4,   2,     3,    1,	 false)
-MUX_CFG(DM365,	SPI1_SDI,	3,   31,    1,    1,	 false)
-MUX_CFG(DM365,	SPI1_SDO,	4,   0,     3,    1,	 false)
-MUX_CFG(DM365,	SPI1_SDENA0,	4,   4,     3,    1,	 false)
-MUX_CFG(DM365,	SPI1_SDENA1,	4,   0,     3,    2,	 false)
-
-MUX_CFG(DM365,	SPI2_SCLK,	4,   10,    3,    1,	 false)
-MUX_CFG(DM365,	SPI2_SDI,	4,   6,     3,    1,	 false)
-MUX_CFG(DM365,	SPI2_SDO,	4,   8,     3,    1,	 false)
-MUX_CFG(DM365,	SPI2_SDENA0,	4,   12,    3,    1,	 false)
-MUX_CFG(DM365,	SPI2_SDENA1,	4,   8,     3,    2,	 false)
-
-MUX_CFG(DM365,	SPI3_SCLK,	0,   0,	    3,    2,	 false)
-MUX_CFG(DM365,	SPI3_SDI,	0,   2,     3,    2,	 false)
-MUX_CFG(DM365,	SPI3_SDO,	0,   6,     3,    2,	 false)
-MUX_CFG(DM365,	SPI3_SDENA0,	0,   4,     3,    2,	 false)
-MUX_CFG(DM365,	SPI3_SDENA1,	0,   6,     3,    3,	 false)
-
-MUX_CFG(DM365,	SPI4_SCLK,	4,   18,    3,    1,	 false)
-MUX_CFG(DM365,	SPI4_SDI,	4,   14,    3,    1,	 false)
-MUX_CFG(DM365,	SPI4_SDO,	4,   16,    3,    1,	 false)
-MUX_CFG(DM365,	SPI4_SDENA0,	4,   20,    3,    1,	 false)
-MUX_CFG(DM365,	SPI4_SDENA1,	4,   16,    3,    2,	 false)
-
-MUX_CFG(DM365,	CLKOUT0,	4,   20,    3,    3,     false)
-MUX_CFG(DM365,	CLKOUT1,	4,   16,    3,    3,     false)
-MUX_CFG(DM365,	CLKOUT2,	4,   8,     3,    3,     false)
-
-MUX_CFG(DM365,	GPIO20,		3,   21,    3,    0,	 false)
-MUX_CFG(DM365,	GPIO30,		4,   6,     3,	  0,	 false)
-MUX_CFG(DM365,	GPIO31,		4,   8,     3,	  0,	 false)
-MUX_CFG(DM365,	GPIO32,		4,   10,    3,	  0,	 false)
-MUX_CFG(DM365,	GPIO33,		4,   12,    3,	  0,	 false)
-MUX_CFG(DM365,	GPIO40,		4,   26,    3,	  0,	 false)
-MUX_CFG(DM365,	GPIO64_57,	2,   6,     1,	  0,	 false)
-
-MUX_CFG(DM365,	VOUT_FIELD,	1,   18,    3,	  1,	 false)
-MUX_CFG(DM365,	VOUT_FIELD_G81,	1,   18,    3,	  0,	 false)
-MUX_CFG(DM365,	VOUT_HVSYNC,	1,   16,    1,	  0,	 false)
-MUX_CFG(DM365,	VOUT_COUTL_EN,	1,   0,     0xff, 0x55,  false)
-MUX_CFG(DM365,	VOUT_COUTH_EN,	1,   8,     0xff, 0x55,  false)
-MUX_CFG(DM365,	VIN_CAM_WEN,	0,   14,    3,	  0,	 false)
-MUX_CFG(DM365,	VIN_CAM_VD,	0,   13,    1,	  0,	 false)
-MUX_CFG(DM365,	VIN_CAM_HD,	0,   12,    1,	  0,	 false)
-MUX_CFG(DM365,	VIN_YIN4_7_EN,	0,   0,     0xff, 0,	 false)
-MUX_CFG(DM365,	VIN_YIN0_3_EN,	0,   8,     0xf,  0,	 false)
-
-INT_CFG(DM365,  INT_EDMA_CC,         2,     1,    1,     false)
-INT_CFG(DM365,  INT_EDMA_TC0_ERR,    3,     1,    1,     false)
-INT_CFG(DM365,  INT_EDMA_TC1_ERR,    4,     1,    1,     false)
-INT_CFG(DM365,  INT_EDMA_TC2_ERR,    22,    1,    1,     false)
-INT_CFG(DM365,  INT_EDMA_TC3_ERR,    23,    1,    1,     false)
-INT_CFG(DM365,  INT_PRTCSS,          10,    1,    1,     false)
-INT_CFG(DM365,  INT_EMAC_RXTHRESH,   14,    1,    1,     false)
-INT_CFG(DM365,  INT_EMAC_RXPULSE,    15,    1,    1,     false)
-INT_CFG(DM365,  INT_EMAC_TXPULSE,    16,    1,    1,     false)
-INT_CFG(DM365,  INT_EMAC_MISCPULSE,  17,    1,    1,     false)
-INT_CFG(DM365,  INT_IMX0_ENABLE,     0,     1,    0,     false)
-INT_CFG(DM365,  INT_IMX0_DISABLE,    0,     1,    1,     false)
-INT_CFG(DM365,  INT_HDVICP_ENABLE,   0,     1,    1,     false)
-INT_CFG(DM365,  INT_HDVICP_DISABLE,  0,     1,    0,     false)
-INT_CFG(DM365,  INT_IMX1_ENABLE,     24,    1,    1,     false)
-INT_CFG(DM365,  INT_IMX1_DISABLE,    24,    1,    0,     false)
-INT_CFG(DM365,  INT_NSF_ENABLE,      25,    1,    1,     false)
-INT_CFG(DM365,  INT_NSF_DISABLE,     25,    1,    0,     false)
-
-EVT_CFG(DM365,	EVT2_ASP_TX,         0,     1,    0,     false)
-EVT_CFG(DM365,	EVT3_ASP_RX,         1,     1,    0,     false)
-EVT_CFG(DM365,	EVT2_VC_TX,          0,     1,    1,     false)
-EVT_CFG(DM365,	EVT3_VC_RX,          1,     1,    1,     false)
-#endif
-};
-
-static u64 dm365_spi0_dma_mask = DMA_BIT_MASK(32);
-
-static struct davinci_spi_platform_data dm365_spi0_pdata = {
-	.version 	= SPI_VERSION_1,
-	.num_chipselect = 2,
-	.dma_event_q	= EVENTQ_3,
-	.prescaler_limit = 1,
-};
-
-static struct resource dm365_spi0_resources[] = {
-	{
-		.start = 0x01c66000,
-		.end   = 0x01c667ff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_DM365_SPIINT0_0),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dm365_spi0_device = {
-	.name = "spi_davinci",
-	.id = 0,
-	.dev = {
-		.dma_mask = &dm365_spi0_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &dm365_spi0_pdata,
-	},
-	.num_resources = ARRAY_SIZE(dm365_spi0_resources),
-	.resource = dm365_spi0_resources,
-};
-
-void __init dm365_init_spi0(unsigned chipselect_mask,
-		const struct spi_board_info *info, unsigned len)
-{
-	davinci_cfg_reg(DM365_SPI0_SCLK);
-	davinci_cfg_reg(DM365_SPI0_SDI);
-	davinci_cfg_reg(DM365_SPI0_SDO);
-
-	/* not all slaves will be wired up */
-	if (chipselect_mask & BIT(0))
-		davinci_cfg_reg(DM365_SPI0_SDENA0);
-	if (chipselect_mask & BIT(1))
-		davinci_cfg_reg(DM365_SPI0_SDENA1);
-
-	spi_register_board_info(info, len);
-
-	platform_device_register(&dm365_spi0_device);
-}
-
-static struct resource dm365_gpio_resources[] = {
-	{	/* registers */
-		.start	= DAVINCI_GPIO_BASE,
-		.end	= DAVINCI_GPIO_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{	/* interrupt */
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO0),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO1),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO1),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO2),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO2),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO3),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO3),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO4),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO4),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO5),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO5),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO6),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO6),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO7),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_GPIO7),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct davinci_gpio_platform_data dm365_gpio_platform_data = {
-	.no_auto_base	= true,
-	.base		= 0,
-	.ngpio		= 104,
-	.gpio_unbanked	= 8,
-};
-
-int __init dm365_gpio_register(void)
-{
-	return davinci_gpio_register(dm365_gpio_resources,
-				     ARRAY_SIZE(dm365_gpio_resources),
-				     &dm365_gpio_platform_data);
-}
-
-static struct emac_platform_data dm365_emac_pdata = {
-	.ctrl_reg_offset	= DM365_EMAC_CNTRL_OFFSET,
-	.ctrl_mod_reg_offset	= DM365_EMAC_CNTRL_MOD_OFFSET,
-	.ctrl_ram_offset	= DM365_EMAC_CNTRL_RAM_OFFSET,
-	.ctrl_ram_size		= DM365_EMAC_CNTRL_RAM_SIZE,
-	.version		= EMAC_VERSION_2,
-};
-
-static struct resource dm365_emac_resources[] = {
-	{
-		.start	= DM365_EMAC_BASE,
-		.end	= DM365_EMAC_BASE + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_RXTHRESH),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_RXTHRESH),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_RXPULSE),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_RXPULSE),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_TXPULSE),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_TXPULSE),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_MISCPULSE),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DM365_EMAC_MISCPULSE),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dm365_emac_device = {
-	.name		= "davinci_emac",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &dm365_emac_pdata,
-	},
-	.num_resources	= ARRAY_SIZE(dm365_emac_resources),
-	.resource	= dm365_emac_resources,
-};
-
-static struct resource dm365_mdio_resources[] = {
-	{
-		.start	= DM365_EMAC_MDIO_BASE,
-		.end	= DM365_EMAC_MDIO_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm365_mdio_device = {
-	.name		= "davinci_mdio",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm365_mdio_resources),
-	.resource	= dm365_mdio_resources,
-};
-
-static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = {
-	[IRQ_VDINT0]			= 2,
-	[IRQ_VDINT1]			= 6,
-	[IRQ_VDINT2]			= 6,
-	[IRQ_HISTINT]			= 6,
-	[IRQ_H3AINT]			= 6,
-	[IRQ_PRVUINT]			= 6,
-	[IRQ_RSZINT]			= 6,
-	[IRQ_DM365_INSFINT]		= 7,
-	[IRQ_VENCINT]			= 6,
-	[IRQ_ASQINT]			= 6,
-	[IRQ_IMXINT]			= 6,
-	[IRQ_DM365_IMCOPINT]		= 4,
-	[IRQ_USBINT]			= 4,
-	[IRQ_DM365_RTOINT]		= 7,
-	[IRQ_DM365_TINT5]		= 7,
-	[IRQ_DM365_TINT6]		= 5,
-	[IRQ_CCINT0]			= 5,
-	[IRQ_CCERRINT]			= 5,
-	[IRQ_TCERRINT0]			= 5,
-	[IRQ_TCERRINT]			= 7,
-	[IRQ_PSCIN]			= 4,
-	[IRQ_DM365_SPINT2_1]		= 7,
-	[IRQ_DM365_TINT7]		= 7,
-	[IRQ_DM365_SDIOINT0]		= 7,
-	[IRQ_MBXINT]			= 7,
-	[IRQ_MBRINT]			= 7,
-	[IRQ_MMCINT]			= 7,
-	[IRQ_DM365_MMCINT1]		= 7,
-	[IRQ_DM365_PWMINT3]		= 7,
-	[IRQ_AEMIFINT]			= 2,
-	[IRQ_DM365_SDIOINT1]		= 2,
-	[IRQ_TINT0_TINT12]		= 7,
-	[IRQ_TINT0_TINT34]		= 7,
-	[IRQ_TINT1_TINT12]		= 7,
-	[IRQ_TINT1_TINT34]		= 7,
-	[IRQ_PWMINT0]			= 7,
-	[IRQ_PWMINT1]			= 3,
-	[IRQ_PWMINT2]			= 3,
-	[IRQ_I2C]			= 3,
-	[IRQ_UARTINT0]			= 3,
-	[IRQ_UARTINT1]			= 3,
-	[IRQ_DM365_RTCINT]		= 3,
-	[IRQ_DM365_SPIINT0_0]		= 3,
-	[IRQ_DM365_SPIINT3_0]		= 3,
-	[IRQ_DM365_GPIO0]		= 3,
-	[IRQ_DM365_GPIO1]		= 7,
-	[IRQ_DM365_GPIO2]		= 4,
-	[IRQ_DM365_GPIO3]		= 4,
-	[IRQ_DM365_GPIO4]		= 7,
-	[IRQ_DM365_GPIO5]		= 7,
-	[IRQ_DM365_GPIO6]		= 7,
-	[IRQ_DM365_GPIO7]		= 7,
-	[IRQ_DM365_EMAC_RXTHRESH]	= 7,
-	[IRQ_DM365_EMAC_RXPULSE]	= 7,
-	[IRQ_DM365_EMAC_TXPULSE]	= 7,
-	[IRQ_DM365_EMAC_MISCPULSE]	= 7,
-	[IRQ_DM365_GPIO12]		= 7,
-	[IRQ_DM365_GPIO13]		= 7,
-	[IRQ_DM365_GPIO14]		= 7,
-	[IRQ_DM365_GPIO15]		= 7,
-	[IRQ_DM365_KEYINT]		= 7,
-	[IRQ_DM365_TCERRINT2]		= 7,
-	[IRQ_DM365_TCERRINT3]		= 7,
-	[IRQ_DM365_EMUINT]		= 7,
-};
-
-/* Four Transfer Controllers on DM365 */
-static s8 dm365_queue_priority_mapping[][2] = {
-	/* {event queue no, Priority} */
-	{0, 7},
-	{1, 7},
-	{2, 7},
-	{3, 0},
-	{-1, -1},
-};
-
-static const struct dma_slave_map dm365_edma_map[] = {
-	{ "davinci-mcbsp", "tx", EDMA_FILTER_PARAM(0, 2) },
-	{ "davinci-mcbsp", "rx", EDMA_FILTER_PARAM(0, 3) },
-	{ "davinci_voicecodec", "tx", EDMA_FILTER_PARAM(0, 2) },
-	{ "davinci_voicecodec", "rx", EDMA_FILTER_PARAM(0, 3) },
-	{ "spi_davinci.2", "tx", EDMA_FILTER_PARAM(0, 10) },
-	{ "spi_davinci.2", "rx", EDMA_FILTER_PARAM(0, 11) },
-	{ "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 14) },
-	{ "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 15) },
-	{ "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 16) },
-	{ "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 17) },
-	{ "spi_davinci.3", "tx", EDMA_FILTER_PARAM(0, 18) },
-	{ "spi_davinci.3", "rx", EDMA_FILTER_PARAM(0, 19) },
-	{ "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) },
-	{ "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) },
-	{ "da830-mmc.1", "rx", EDMA_FILTER_PARAM(0, 30) },
-	{ "da830-mmc.1", "tx", EDMA_FILTER_PARAM(0, 31) },
-};
-
-static struct edma_soc_info dm365_edma_pdata = {
-	.queue_priority_mapping	= dm365_queue_priority_mapping,
-	.default_queue		= EVENTQ_3,
-	.slave_map		= dm365_edma_map,
-	.slavecnt		= ARRAY_SIZE(dm365_edma_map),
-};
-
-static struct resource edma_resources[] = {
-	{
-		.name	= "edma3_cc",
-		.start	= 0x01c00000,
-		.end	= 0x01c00000 + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc0",
-		.start	= 0x01c10000,
-		.end	= 0x01c10000 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc1",
-		.start	= 0x01c10400,
-		.end	= 0x01c10400 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc2",
-		.start	= 0x01c10800,
-		.end	= 0x01c10800 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_tc3",
-		.start	= 0x01c10c00,
-		.end	= 0x01c10c00 + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma3_ccint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_CCINT0),
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma3_ccerrint",
-		.start	= DAVINCI_INTC_IRQ(IRQ_CCERRINT),
-		.flags	= IORESOURCE_IRQ,
-	},
-	/* not using TC*_ERR */
-};
-
-static const struct platform_device_info dm365_edma_device __initconst = {
-	.name		= "edma",
-	.id		= 0,
-	.dma_mask	= DMA_BIT_MASK(32),
-	.res		= edma_resources,
-	.num_res	= ARRAY_SIZE(edma_resources),
-	.data		= &dm365_edma_pdata,
-	.size_data	= sizeof(dm365_edma_pdata),
-};
-
-static struct resource dm365_asp_resources[] = {
-	{
-		.name	= "mpu",
-		.start	= DAVINCI_DM365_ASP0_BASE,
-		.end	= DAVINCI_DM365_ASP0_BASE + SZ_8K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_DMA_ASP0_TX,
-		.end	= DAVINCI_DMA_ASP0_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.start	= DAVINCI_DMA_ASP0_RX,
-		.end	= DAVINCI_DMA_ASP0_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device dm365_asp_device = {
-	.name		= "davinci-mcbsp",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm365_asp_resources),
-	.resource	= dm365_asp_resources,
-};
-
-static struct resource dm365_vc_resources[] = {
-	{
-		.start	= DAVINCI_DM365_VC_BASE,
-		.end	= DAVINCI_DM365_VC_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= DAVINCI_DMA_VC_TX,
-		.end	= DAVINCI_DMA_VC_TX,
-		.flags	= IORESOURCE_DMA,
-	},
-	{
-		.start	= DAVINCI_DMA_VC_RX,
-		.end	= DAVINCI_DMA_VC_RX,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device dm365_vc_device = {
-	.name		= "davinci_voicecodec",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm365_vc_resources),
-	.resource	= dm365_vc_resources,
-};
-
-static struct resource dm365_rtc_resources[] = {
-	{
-		.start = DM365_RTC_BASE,
-		.end = DM365_RTC_BASE + SZ_1K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_DM365_RTCINT),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dm365_rtc_device = {
-	.name = "rtc_davinci",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(dm365_rtc_resources),
-	.resource = dm365_rtc_resources,
-};
-
-static struct map_desc dm365_io_desc[] = {
-	{
-		.virtual	= IO_VIRT,
-		.pfn		= __phys_to_pfn(IO_PHYS),
-		.length		= IO_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-static struct resource dm365_ks_resources[] = {
-	{
-		/* registers */
-		.start = DM365_KEYSCAN_BASE,
-		.end = DM365_KEYSCAN_BASE + SZ_1K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		/* interrupt */
-		.start = DAVINCI_INTC_IRQ(IRQ_DM365_KEYINT),
-		.end = DAVINCI_INTC_IRQ(IRQ_DM365_KEYINT),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device dm365_ks_device = {
-	.name		= "davinci_keyscan",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm365_ks_resources),
-	.resource	= dm365_ks_resources,
-};
-
-/* Contents of JTAG ID register used to identify exact cpu type */
-static struct davinci_id dm365_ids[] = {
-	{
-		.variant	= 0x0,
-		.part_no	= 0xb83e,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_DM365,
-		.name		= "dm365_rev1.1",
-	},
-	{
-		.variant	= 0x8,
-		.part_no	= 0xb83e,
-		.manufacturer	= 0x017,
-		.cpu_id		= DAVINCI_CPU_ID_DM365,
-		.name		= "dm365_rev1.2",
-	},
-};
-
-/*
- * Bottom half of timer0 is used for clockevent, top half is used for
- * clocksource.
- */
-static const struct davinci_timer_cfg dm365_timer_cfg = {
-	.reg = DEFINE_RES_IO(DAVINCI_TIMER0_BASE, SZ_128),
-	.irq = {
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT12)),
-		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT34)),
-	},
-};
-
-#define DM365_UART1_BASE	(IO_PHYS + 0x106000)
-
-static struct plat_serial8250_port dm365_serial0_platform_data[] = {
-	{
-		.mapbase	= DAVINCI_UART0_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_UARTINT0),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-static struct plat_serial8250_port dm365_serial1_platform_data[] = {
-	{
-		.mapbase	= DM365_UART1_BASE,
-		.irq		= DAVINCI_INTC_IRQ(IRQ_UARTINT1),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
-				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-	},
-	{
-		.flags	= 0,
-	}
-};
-
-struct platform_device dm365_serial_device[] = {
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM,
-		.dev			= {
-			.platform_data	= dm365_serial0_platform_data,
-		}
-	},
-	{
-		.name			= "serial8250",
-		.id			= PLAT8250_DEV_PLATFORM1,
-		.dev			= {
-			.platform_data	= dm365_serial1_platform_data,
-		}
-	},
-	{
-	}
-};
-
-static const struct davinci_soc_info davinci_soc_info_dm365 = {
-	.io_desc		= dm365_io_desc,
-	.io_desc_num		= ARRAY_SIZE(dm365_io_desc),
-	.jtag_id_reg		= 0x01c40028,
-	.ids			= dm365_ids,
-	.ids_num		= ARRAY_SIZE(dm365_ids),
-	.pinmux_base		= DAVINCI_SYSTEM_MODULE_BASE,
-	.pinmux_pins		= dm365_pins,
-	.pinmux_pins_num	= ARRAY_SIZE(dm365_pins),
-	.emac_pdata		= &dm365_emac_pdata,
-	.sram_dma		= 0x00010000,
-	.sram_len		= SZ_32K,
-};
-
-void __init dm365_init_asp(void)
-{
-	davinci_cfg_reg(DM365_MCBSP0_BDX);
-	davinci_cfg_reg(DM365_MCBSP0_X);
-	davinci_cfg_reg(DM365_MCBSP0_BFSX);
-	davinci_cfg_reg(DM365_MCBSP0_BDR);
-	davinci_cfg_reg(DM365_MCBSP0_R);
-	davinci_cfg_reg(DM365_MCBSP0_BFSR);
-	davinci_cfg_reg(DM365_EVT2_ASP_TX);
-	davinci_cfg_reg(DM365_EVT3_ASP_RX);
-	platform_device_register(&dm365_asp_device);
-}
-
-void __init dm365_init_vc(void)
-{
-	davinci_cfg_reg(DM365_EVT2_VC_TX);
-	davinci_cfg_reg(DM365_EVT3_VC_RX);
-	platform_device_register(&dm365_vc_device);
-}
-
-void __init dm365_init_ks(struct davinci_ks_platform_data *pdata)
-{
-	dm365_ks_device.dev.platform_data = pdata;
-	platform_device_register(&dm365_ks_device);
-}
-
-void __init dm365_init_rtc(void)
-{
-	davinci_cfg_reg(DM365_INT_PRTCSS);
-	platform_device_register(&dm365_rtc_device);
-}
-
-void __init dm365_init(void)
-{
-	davinci_common_init(&davinci_soc_info_dm365);
-	davinci_map_sysmod();
-}
-
-void __init dm365_init_time(void)
-{
-	void __iomem *pll1, *pll2, *psc;
-	struct clk *clk;
-	int rv;
-
-	clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DM365_REF_FREQ);
-
-	pll1 = ioremap(DAVINCI_PLL1_BASE, SZ_1K);
-	dm365_pll1_init(NULL, pll1, NULL);
-
-	pll2 = ioremap(DAVINCI_PLL2_BASE, SZ_1K);
-	dm365_pll2_init(NULL, pll2, NULL);
-
-	psc = ioremap(DAVINCI_PWR_SLEEP_CNTRL_BASE, SZ_4K);
-	dm365_psc_init(NULL, psc);
-
-	clk = clk_get(NULL, "timer0");
-	if (WARN_ON(IS_ERR(clk))) {
-		pr_err("Unable to get the timer clock\n");
-		return;
-	}
-
-	rv = davinci_timer_register(clk, &dm365_timer_cfg);
-	WARN(rv, "Unable to register the timer: %d\n", rv);
-}
-
-void __init dm365_register_clocks(void)
-{
-	/* all clocks are currently registered in dm365_init_time() */
-}
-
-static struct resource dm365_vpss_resources[] = {
-	{
-		/* VPSS ISP5 Base address */
-		.name           = "isp5",
-		.start          = 0x01c70000,
-		.end            = 0x01c70000 + 0xff,
-		.flags          = IORESOURCE_MEM,
-	},
-	{
-		/* VPSS CLK Base address */
-		.name           = "vpss",
-		.start          = 0x01c70200,
-		.end            = 0x01c70200 + 0xff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device dm365_vpss_device = {
-       .name                   = "vpss",
-       .id                     = -1,
-       .dev.platform_data      = "dm365_vpss",
-       .num_resources          = ARRAY_SIZE(dm365_vpss_resources),
-       .resource               = dm365_vpss_resources,
-};
-
-static struct resource vpfe_resources[] = {
-	{
-		.start          = DAVINCI_INTC_IRQ(IRQ_VDINT0),
-		.end            = DAVINCI_INTC_IRQ(IRQ_VDINT0),
-		.flags          = IORESOURCE_IRQ,
-	},
-	{
-		.start          = DAVINCI_INTC_IRQ(IRQ_VDINT1),
-		.end            = DAVINCI_INTC_IRQ(IRQ_VDINT1),
-		.flags          = IORESOURCE_IRQ,
-	},
-};
-
-static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
-static struct platform_device vpfe_capture_dev = {
-	.name           = CAPTURE_DRV_NAME,
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(vpfe_resources),
-	.resource       = vpfe_resources,
-	.dev = {
-		.dma_mask               = &vpfe_capture_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-};
-
-static void dm365_isif_setup_pinmux(void)
-{
-	davinci_cfg_reg(DM365_VIN_CAM_WEN);
-	davinci_cfg_reg(DM365_VIN_CAM_VD);
-	davinci_cfg_reg(DM365_VIN_CAM_HD);
-	davinci_cfg_reg(DM365_VIN_YIN4_7_EN);
-	davinci_cfg_reg(DM365_VIN_YIN0_3_EN);
-}
-
-static struct resource isif_resource[] = {
-	/* ISIF Base address */
-	{
-		.start          = 0x01c71000,
-		.end            = 0x01c71000 + 0x1ff,
-		.flags          = IORESOURCE_MEM,
-	},
-	/* ISIF Linearization table 0 */
-	{
-		.start          = 0x1C7C000,
-		.end            = 0x1C7C000 + 0x2ff,
-		.flags          = IORESOURCE_MEM,
-	},
-	/* ISIF Linearization table 1 */
-	{
-		.start          = 0x1C7C400,
-		.end            = 0x1C7C400 + 0x2ff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-static struct platform_device dm365_isif_dev = {
-	.name           = "isif",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(isif_resource),
-	.resource       = isif_resource,
-	.dev = {
-		.dma_mask               = &vpfe_capture_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-		.platform_data		= dm365_isif_setup_pinmux,
-	},
-};
-
-static struct resource dm365_osd_resources[] = {
-	{
-		.start = DM365_OSD_BASE,
-		.end   = DM365_OSD_BASE + 0xff,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static u64 dm365_video_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device dm365_osd_dev = {
-	.name		= DM365_VPBE_OSD_SUBDEV_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm365_osd_resources),
-	.resource	= dm365_osd_resources,
-	.dev		= {
-		.dma_mask		= &dm365_video_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static struct resource dm365_venc_resources[] = {
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.end   = DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.flags = IORESOURCE_IRQ,
-	},
-	/* venc registers io space */
-	{
-		.start = DM365_VENC_BASE,
-		.end   = DM365_VENC_BASE + 0x177,
-		.flags = IORESOURCE_MEM,
-	},
-	/* vdaccfg registers io space */
-	{
-		.start = DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG,
-		.end   = DAVINCI_SYSTEM_MODULE_BASE + SYSMOD_VDAC_CONFIG + 3,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct resource dm365_v4l2_disp_resources[] = {
-	{
-		.start = DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.end   = DAVINCI_INTC_IRQ(IRQ_VENCINT),
-		.flags = IORESOURCE_IRQ,
-	},
-	/* venc registers io space */
-	{
-		.start = DM365_VENC_BASE,
-		.end   = DM365_VENC_BASE + 0x177,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static int dm365_vpbe_setup_pinmux(u32 if_type, int field)
-{
-	switch (if_type) {
-	case MEDIA_BUS_FMT_SGRBG8_1X8:
-		davinci_cfg_reg(DM365_VOUT_FIELD_G81);
-		davinci_cfg_reg(DM365_VOUT_COUTL_EN);
-		davinci_cfg_reg(DM365_VOUT_COUTH_EN);
-		break;
-	case MEDIA_BUS_FMT_YUYV10_1X20:
-		if (field)
-			davinci_cfg_reg(DM365_VOUT_FIELD);
-		else
-			davinci_cfg_reg(DM365_VOUT_FIELD_G81);
-		davinci_cfg_reg(DM365_VOUT_COUTL_EN);
-		davinci_cfg_reg(DM365_VOUT_COUTH_EN);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int dm365_venc_setup_clock(enum vpbe_enc_timings_type type,
-				  unsigned int pclock)
-{
-	void __iomem *vpss_clkctl_reg;
-	u32 val;
-
-	vpss_clkctl_reg = DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL);
-
-	switch (type) {
-	case VPBE_ENC_STD:
-		val = VPSS_VENCCLKEN_ENABLE | VPSS_DACCLKEN_ENABLE;
-		break;
-	case VPBE_ENC_DV_TIMINGS:
-		if (pclock <= 27000000) {
-			val = VPSS_VENCCLKEN_ENABLE | VPSS_DACCLKEN_ENABLE;
-		} else {
-			/* set sysclk4 to output 74.25 MHz from pll1 */
-			val = VPSS_PLLC2SYSCLK5_ENABLE | VPSS_DACCLKEN_ENABLE |
-			      VPSS_VENCCLKEN_ENABLE;
-		}
-		break;
-	default:
-		return -EINVAL;
-	}
-	writel(val, vpss_clkctl_reg);
-
-	return 0;
-}
-
-static struct platform_device dm365_vpbe_display = {
-	.name		= "vpbe-v4l2",
-	.id		= -1,
-	.num_resources  = ARRAY_SIZE(dm365_v4l2_disp_resources),
-	.resource	= dm365_v4l2_disp_resources,
-	.dev		= {
-		.dma_mask		= &dm365_video_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-static struct venc_platform_data dm365_venc_pdata = {
-	.setup_pinmux	= dm365_vpbe_setup_pinmux,
-	.setup_clock	= dm365_venc_setup_clock,
-};
-
-static struct platform_device dm365_venc_dev = {
-	.name		= DM365_VPBE_VENC_SUBDEV_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm365_venc_resources),
-	.resource	= dm365_venc_resources,
-	.dev		= {
-		.dma_mask		= &dm365_video_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= (void *)&dm365_venc_pdata,
-	},
-};
-
-static struct platform_device dm365_vpbe_dev = {
-	.name		= "vpbe_controller",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &dm365_video_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-int __init dm365_init_video(struct vpfe_config *vpfe_cfg,
-				struct vpbe_config *vpbe_cfg)
-{
-	if (vpfe_cfg || vpbe_cfg)
-		platform_device_register(&dm365_vpss_device);
-
-	if (vpfe_cfg) {
-		vpfe_capture_dev.dev.platform_data = vpfe_cfg;
-		platform_device_register(&dm365_isif_dev);
-		platform_device_register(&vpfe_capture_dev);
-	}
-	if (vpbe_cfg) {
-		dm365_vpbe_dev.dev.platform_data = vpbe_cfg;
-		platform_device_register(&dm365_osd_dev);
-		platform_device_register(&dm365_venc_dev);
-		platform_device_register(&dm365_vpbe_dev);
-		platform_device_register(&dm365_vpbe_display);
-	}
-
-	return 0;
-}
-
-static const struct davinci_aintc_config dm365_aintc_config = {
-	.reg = {
-		.start		= DAVINCI_ARM_INTC_BASE,
-		.end		= DAVINCI_ARM_INTC_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	.num_irqs		= 64,
-	.prios			= dm365_default_priorities,
-};
-
-void __init dm365_init_irq(void)
-{
-	davinci_aintc_init(&dm365_aintc_config);
-}
-
-static int __init dm365_init_devices(void)
-{
-	struct platform_device *edma_pdev;
-	int ret = 0;
-
-	if (!cpu_is_davinci_dm365())
-		return 0;
-
-	davinci_cfg_reg(DM365_INT_EDMA_CC);
-	edma_pdev = platform_device_register_full(&dm365_edma_device);
-	if (IS_ERR(edma_pdev)) {
-		pr_warn("%s: Failed to register eDMA\n", __func__);
-		return PTR_ERR(edma_pdev);
-	}
-
-	platform_device_register(&dm365_mdio_device);
-	platform_device_register(&dm365_emac_device);
-
-	ret = davinci_init_wdt();
-	if (ret)
-		pr_warn("%s: watchdog init failed: %d\n", __func__, ret);
-
-	return ret;
-}
-postcore_initcall(dm365_init_devices);
diff --git a/arch/arm/mach-davinci/irqs.h b/arch/arm/mach-davinci/irqs.h
index 8f9fc7a56ce8..b1ceed81e9fa 100644
--- a/arch/arm/mach-davinci/irqs.h
+++ b/arch/arm/mach-davinci/irqs.h
@@ -27,219 +27,6 @@
 #ifndef __ASM_ARCH_IRQS_H
 #define __ASM_ARCH_IRQS_H
 
-/* Base address */
-#define DAVINCI_ARM_INTC_BASE 0x01C48000
-
-/* Interrupt lines */
-#define IRQ_VDINT0       0
-#define IRQ_VDINT1       1
-#define IRQ_VDINT2       2
-#define IRQ_HISTINT      3
-#define IRQ_H3AINT       4
-#define IRQ_PRVUINT      5
-#define IRQ_RSZINT       6
-#define IRQ_VFOCINT      7
-#define IRQ_VENCINT      8
-#define IRQ_ASQINT       9
-#define IRQ_IMXINT       10
-#define IRQ_VLCDINT      11
-#define IRQ_USBINT       12
-#define IRQ_EMACINT      13
-
-#define IRQ_CCINT0       16
-#define IRQ_CCERRINT     17
-#define IRQ_TCERRINT0    18
-#define IRQ_TCERRINT     19
-#define IRQ_PSCIN        20
-
-#define IRQ_IDE          22
-#define IRQ_HPIINT       23
-#define IRQ_MBXINT       24
-#define IRQ_MBRINT       25
-#define IRQ_MMCINT       26
-#define IRQ_SDIOINT      27
-#define IRQ_MSINT        28
-#define IRQ_DDRINT       29
-#define IRQ_AEMIFINT     30
-#define IRQ_VLQINT       31
-#define IRQ_TINT0_TINT12 32
-#define IRQ_TINT0_TINT34 33
-#define IRQ_TINT1_TINT12 34
-#define IRQ_TINT1_TINT34 35
-#define IRQ_PWMINT0      36
-#define IRQ_PWMINT1      37
-#define IRQ_PWMINT2      38
-#define IRQ_I2C          39
-#define IRQ_UARTINT0     40
-#define IRQ_UARTINT1     41
-#define IRQ_UARTINT2     42
-#define IRQ_SPINT0       43
-#define IRQ_SPINT1       44
-
-#define IRQ_DSP2ARM0     46
-#define IRQ_DSP2ARM1     47
-#define IRQ_GPIO0        48
-#define IRQ_GPIO1        49
-#define IRQ_GPIO2        50
-#define IRQ_GPIO3        51
-#define IRQ_GPIO4        52
-#define IRQ_GPIO5        53
-#define IRQ_GPIO6        54
-#define IRQ_GPIO7        55
-#define IRQ_GPIOBNK0     56
-#define IRQ_GPIOBNK1     57
-#define IRQ_GPIOBNK2     58
-#define IRQ_GPIOBNK3     59
-#define IRQ_GPIOBNK4     60
-#define IRQ_COMMTX       61
-#define IRQ_COMMRX       62
-#define IRQ_EMUINT       63
-
-#define DAVINCI_N_AINTC_IRQ	64
-
-#define ARCH_TIMER_IRQ IRQ_TINT1_TINT34
-
-/* DaVinci DM6467-specific Interrupts */
-#define IRQ_DM646X_VP_VERTINT0  0
-#define IRQ_DM646X_VP_VERTINT1  1
-#define IRQ_DM646X_VP_VERTINT2  2
-#define IRQ_DM646X_VP_VERTINT3  3
-#define IRQ_DM646X_VP_ERRINT    4
-#define IRQ_DM646X_RESERVED_1   5
-#define IRQ_DM646X_RESERVED_2   6
-#define IRQ_DM646X_WDINT        7
-#define IRQ_DM646X_CRGENINT0    8
-#define IRQ_DM646X_CRGENINT1    9
-#define IRQ_DM646X_TSIFINT0     10
-#define IRQ_DM646X_TSIFINT1     11
-#define IRQ_DM646X_VDCEINT      12
-#define IRQ_DM646X_USBINT       13
-#define IRQ_DM646X_USBDMAINT    14
-#define IRQ_DM646X_PCIINT       15
-#define IRQ_DM646X_TCERRINT2    20
-#define IRQ_DM646X_TCERRINT3    21
-#define IRQ_DM646X_IDE          22
-#define IRQ_DM646X_HPIINT       23
-#define IRQ_DM646X_EMACRXTHINT  24
-#define IRQ_DM646X_EMACRXINT    25
-#define IRQ_DM646X_EMACTXINT    26
-#define IRQ_DM646X_EMACMISCINT  27
-#define IRQ_DM646X_MCASP0TXINT  28
-#define IRQ_DM646X_MCASP0RXINT  29
-#define IRQ_DM646X_MCASP1TXINT  30
-#define IRQ_DM646X_RESERVED_3   31
-#define IRQ_DM646X_VLQINT       38
-#define IRQ_DM646X_UARTINT2     42
-#define IRQ_DM646X_SPINT0       43
-#define IRQ_DM646X_SPINT1       44
-#define IRQ_DM646X_DSP2ARMINT   45
-#define IRQ_DM646X_RESERVED_4   46
-#define IRQ_DM646X_PSCINT       47
-#define IRQ_DM646X_GPIO0        48
-#define IRQ_DM646X_GPIO1        49
-#define IRQ_DM646X_GPIO2        50
-#define IRQ_DM646X_GPIO3        51
-#define IRQ_DM646X_GPIO4        52
-#define IRQ_DM646X_GPIO5        53
-#define IRQ_DM646X_GPIO6        54
-#define IRQ_DM646X_GPIO7        55
-#define IRQ_DM646X_GPIOBNK0     56
-#define IRQ_DM646X_GPIOBNK1     57
-#define IRQ_DM646X_GPIOBNK2     58
-#define IRQ_DM646X_DDRINT       59
-#define IRQ_DM646X_AEMIFINT     60
-
-/* DaVinci DM355-specific Interrupts */
-#define IRQ_DM355_CCDC_VDINT0	0
-#define IRQ_DM355_CCDC_VDINT1	1
-#define IRQ_DM355_CCDC_VDINT2	2
-#define IRQ_DM355_IPIPE_HST	3
-#define IRQ_DM355_H3AINT	4
-#define IRQ_DM355_IPIPE_SDR	5
-#define IRQ_DM355_IPIPEIFINT	6
-#define IRQ_DM355_OSDINT	7
-#define IRQ_DM355_VENCINT	8
-#define IRQ_DM355_IMCOPINT	11
-#define IRQ_DM355_RTOINT	13
-#define IRQ_DM355_TINT4		13
-#define IRQ_DM355_TINT2_TINT12	13
-#define IRQ_DM355_UARTINT2	14
-#define IRQ_DM355_TINT5		14
-#define IRQ_DM355_TINT2_TINT34	14
-#define IRQ_DM355_TINT6		15
-#define IRQ_DM355_TINT3_TINT12	15
-#define IRQ_DM355_SPINT1_0	17
-#define IRQ_DM355_SPINT1_1	18
-#define IRQ_DM355_SPINT2_0	19
-#define IRQ_DM355_SPINT2_1	21
-#define IRQ_DM355_TINT7		22
-#define IRQ_DM355_TINT3_TINT34	22
-#define IRQ_DM355_SDIOINT0	23
-#define IRQ_DM355_MMCINT0	26
-#define IRQ_DM355_MSINT		26
-#define IRQ_DM355_MMCINT1	27
-#define IRQ_DM355_PWMINT3	28
-#define IRQ_DM355_SDIOINT1	31
-#define IRQ_DM355_SPINT0_0	42
-#define IRQ_DM355_SPINT0_1	43
-#define IRQ_DM355_GPIO0		44
-#define IRQ_DM355_GPIO1		45
-#define IRQ_DM355_GPIO2		46
-#define IRQ_DM355_GPIO3		47
-#define IRQ_DM355_GPIO4		48
-#define IRQ_DM355_GPIO5		49
-#define IRQ_DM355_GPIO6		50
-#define IRQ_DM355_GPIO7		51
-#define IRQ_DM355_GPIO8		52
-#define IRQ_DM355_GPIO9		53
-#define IRQ_DM355_GPIOBNK0	54
-#define IRQ_DM355_GPIOBNK1	55
-#define IRQ_DM355_GPIOBNK2	56
-#define IRQ_DM355_GPIOBNK3	57
-#define IRQ_DM355_GPIOBNK4	58
-#define IRQ_DM355_GPIOBNK5	59
-#define IRQ_DM355_GPIOBNK6	60
-
-/* DaVinci DM365-specific Interrupts */
-#define IRQ_DM365_INSFINT	7
-#define IRQ_DM365_IMXINT1	8
-#define IRQ_DM365_IMXINT0	10
-#define IRQ_DM365_KLD_ARMINT	10
-#define IRQ_DM365_IMCOPINT	11
-#define IRQ_DM365_RTOINT	13
-#define IRQ_DM365_TINT5		14
-#define IRQ_DM365_TINT6		15
-#define IRQ_DM365_SPINT2_1	21
-#define IRQ_DM365_TINT7		22
-#define IRQ_DM365_SDIOINT0	23
-#define IRQ_DM365_MMCINT1	27
-#define IRQ_DM365_PWMINT3	28
-#define IRQ_DM365_RTCINT	29
-#define IRQ_DM365_SDIOINT1	31
-#define IRQ_DM365_SPIINT0_0	42
-#define IRQ_DM365_SPIINT3_0	43
-#define IRQ_DM365_GPIO0		44
-#define IRQ_DM365_GPIO1		45
-#define IRQ_DM365_GPIO2		46
-#define IRQ_DM365_GPIO3		47
-#define IRQ_DM365_GPIO4		48
-#define IRQ_DM365_GPIO5		49
-#define IRQ_DM365_GPIO6		50
-#define IRQ_DM365_GPIO7		51
-#define IRQ_DM365_EMAC_RXTHRESH	52
-#define IRQ_DM365_EMAC_RXPULSE	53
-#define IRQ_DM365_EMAC_TXPULSE	54
-#define IRQ_DM365_EMAC_MISCPULSE 55
-#define IRQ_DM365_GPIO12	56
-#define IRQ_DM365_GPIO13	57
-#define IRQ_DM365_GPIO14	58
-#define IRQ_DM365_GPIO15	59
-#define IRQ_DM365_ADCINT	59
-#define IRQ_DM365_KEYINT	60
-#define IRQ_DM365_TCERRINT2	61
-#define IRQ_DM365_TCERRINT3	62
-#define IRQ_DM365_EMUINT	63
-
 /* DA8XX interrupts */
 #define IRQ_DA8XX_COMMTX		0
 #define IRQ_DA8XX_COMMRX		1
@@ -398,8 +185,4 @@
 
 #define DA850_N_CP_INTC_IRQ		101
 
-/* da850 currently has the most gpio pins (144) */
-#define DAVINCI_N_GPIO			144
-/* da850 currently has the most irqs so use DA850_N_CP_INTC_IRQ */
-
 #endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c
index 814a6b714010..37de35eb6e8b 100644
--- a/arch/arm/mach-davinci/mux.c
+++ b/arch/arm/mach-davinci/mux.c
@@ -97,18 +97,3 @@ int davinci_cfg_reg(const unsigned long index)
 
 	return 0;
 }
-EXPORT_SYMBOL(davinci_cfg_reg);
-
-int davinci_cfg_reg_list(const short pins[])
-{
-	int i, error = -EINVAL;
-
-	if (pins)
-		for (i = 0; pins[i] >= 0; i++) {
-			error = davinci_cfg_reg(pins[i]);
-			if (error)
-				break;
-		}
-
-	return error;
-}
diff --git a/arch/arm/mach-davinci/mux.h b/arch/arm/mach-davinci/mux.h
index b5effe16402c..38f0e427291e 100644
--- a/arch/arm/mach-davinci/mux.h
+++ b/arch/arm/mach-davinci/mux.h
@@ -21,321 +21,6 @@ struct mux_config {
 	bool debug;
 };
 
-enum davinci_dm644x_index {
-	/* ATA and HDDIR functions */
-	DM644X_HDIREN,
-	DM644X_ATAEN,
-	DM644X_ATAEN_DISABLE,
-
-	/* HPI functions */
-	DM644X_HPIEN_DISABLE,
-
-	/* AEAW functions */
-	DM644X_AEAW,
-	DM644X_AEAW0,
-	DM644X_AEAW1,
-	DM644X_AEAW2,
-	DM644X_AEAW3,
-	DM644X_AEAW4,
-
-	/* Memory Stick */
-	DM644X_MSTK,
-
-	/* I2C */
-	DM644X_I2C,
-
-	/* ASP function */
-	DM644X_MCBSP,
-
-	/* UART1 */
-	DM644X_UART1,
-
-	/* UART2 */
-	DM644X_UART2,
-
-	/* PWM0 */
-	DM644X_PWM0,
-
-	/* PWM1 */
-	DM644X_PWM1,
-
-	/* PWM2 */
-	DM644X_PWM2,
-
-	/* VLYNQ function */
-	DM644X_VLYNQEN,
-	DM644X_VLSCREN,
-	DM644X_VLYNQWD,
-
-	/* EMAC and MDIO function */
-	DM644X_EMACEN,
-
-	/* GPIO3V[0:16] pins */
-	DM644X_GPIO3V,
-
-	/* GPIO pins */
-	DM644X_GPIO0,
-	DM644X_GPIO3,
-	DM644X_GPIO43_44,
-	DM644X_GPIO46_47,
-
-	/* VPBE */
-	DM644X_RGB666,
-
-	/* LCD */
-	DM644X_LOEEN,
-	DM644X_LFLDEN,
-};
-
-enum davinci_dm646x_index {
-	/* ATA function */
-	DM646X_ATAEN,
-
-	/* AUDIO Clock */
-	DM646X_AUDCK1,
-	DM646X_AUDCK0,
-
-	/* CRGEN Control */
-	DM646X_CRGMUX,
-
-	/* VPIF Control */
-	DM646X_STSOMUX_DISABLE,
-	DM646X_STSIMUX_DISABLE,
-	DM646X_PTSOMUX_DISABLE,
-	DM646X_PTSIMUX_DISABLE,
-
-	/* TSIF Control */
-	DM646X_STSOMUX,
-	DM646X_STSIMUX,
-	DM646X_PTSOMUX_PARALLEL,
-	DM646X_PTSIMUX_PARALLEL,
-	DM646X_PTSOMUX_SERIAL,
-	DM646X_PTSIMUX_SERIAL,
-};
-
-enum davinci_dm355_index {
-	/* MMC/SD 0 */
-	DM355_MMCSD0,
-
-	/* MMC/SD 1 */
-	DM355_SD1_CLK,
-	DM355_SD1_CMD,
-	DM355_SD1_DATA3,
-	DM355_SD1_DATA2,
-	DM355_SD1_DATA1,
-	DM355_SD1_DATA0,
-
-	/* I2C */
-	DM355_I2C_SDA,
-	DM355_I2C_SCL,
-
-	/* ASP0 function */
-	DM355_MCBSP0_BDX,
-	DM355_MCBSP0_X,
-	DM355_MCBSP0_BFSX,
-	DM355_MCBSP0_BDR,
-	DM355_MCBSP0_R,
-	DM355_MCBSP0_BFSR,
-
-	/* SPI0 */
-	DM355_SPI0_SDI,
-	DM355_SPI0_SDENA0,
-	DM355_SPI0_SDENA1,
-
-	/* IRQ muxing */
-	DM355_INT_EDMA_CC,
-	DM355_INT_EDMA_TC0_ERR,
-	DM355_INT_EDMA_TC1_ERR,
-
-	/* EDMA event muxing */
-	DM355_EVT8_ASP1_TX,
-	DM355_EVT9_ASP1_RX,
-	DM355_EVT26_MMC0_RX,
-
-	/* Video Out */
-	DM355_VOUT_FIELD,
-	DM355_VOUT_FIELD_G70,
-	DM355_VOUT_HVSYNC,
-	DM355_VOUT_COUTL_EN,
-	DM355_VOUT_COUTH_EN,
-
-	/* Video In Pin Mux */
-	DM355_VIN_PCLK,
-	DM355_VIN_CAM_WEN,
-	DM355_VIN_CAM_VD,
-	DM355_VIN_CAM_HD,
-	DM355_VIN_YIN_EN,
-	DM355_VIN_CINL_EN,
-	DM355_VIN_CINH_EN,
-};
-
-enum davinci_dm365_index {
-	/* MMC/SD 0 */
-	DM365_MMCSD0,
-
-	/* MMC/SD 1 */
-	DM365_SD1_CLK,
-	DM365_SD1_CMD,
-	DM365_SD1_DATA3,
-	DM365_SD1_DATA2,
-	DM365_SD1_DATA1,
-	DM365_SD1_DATA0,
-
-	/* I2C */
-	DM365_I2C_SDA,
-	DM365_I2C_SCL,
-
-	/* AEMIF */
-	DM365_AEMIF_AR_A14,
-	DM365_AEMIF_AR_BA0,
-	DM365_AEMIF_A3,
-	DM365_AEMIF_A7,
-	DM365_AEMIF_D15_8,
-	DM365_AEMIF_CE0,
-	DM365_AEMIF_CE1,
-	DM365_AEMIF_WE_OE,
-
-	/* ASP0 function */
-	DM365_MCBSP0_BDX,
-	DM365_MCBSP0_X,
-	DM365_MCBSP0_BFSX,
-	DM365_MCBSP0_BDR,
-	DM365_MCBSP0_R,
-	DM365_MCBSP0_BFSR,
-
-	/* SPI0 */
-	DM365_SPI0_SCLK,
-	DM365_SPI0_SDI,
-	DM365_SPI0_SDO,
-	DM365_SPI0_SDENA0,
-	DM365_SPI0_SDENA1,
-
-	/* UART */
-	DM365_UART0_RXD,
-	DM365_UART0_TXD,
-	DM365_UART1_RXD,
-	DM365_UART1_TXD,
-	DM365_UART1_RTS,
-	DM365_UART1_CTS,
-
-	/* EMAC */
-	DM365_EMAC_TX_EN,
-	DM365_EMAC_TX_CLK,
-	DM365_EMAC_COL,
-	DM365_EMAC_TXD3,
-	DM365_EMAC_TXD2,
-	DM365_EMAC_TXD1,
-	DM365_EMAC_TXD0,
-	DM365_EMAC_RXD3,
-	DM365_EMAC_RXD2,
-	DM365_EMAC_RXD1,
-	DM365_EMAC_RXD0,
-	DM365_EMAC_RX_CLK,
-	DM365_EMAC_RX_DV,
-	DM365_EMAC_RX_ER,
-	DM365_EMAC_CRS,
-	DM365_EMAC_MDIO,
-	DM365_EMAC_MDCLK,
-
-	/* Key Scan */
-	DM365_KEYSCAN,
-
-	/* PWM */
-	DM365_PWM0,
-	DM365_PWM0_G23,
-	DM365_PWM1,
-	DM365_PWM1_G25,
-	DM365_PWM2_G87,
-	DM365_PWM2_G88,
-	DM365_PWM2_G89,
-	DM365_PWM2_G90,
-	DM365_PWM3_G80,
-	DM365_PWM3_G81,
-	DM365_PWM3_G85,
-	DM365_PWM3_G86,
-
-	/* SPI1 */
-	DM365_SPI1_SCLK,
-	DM365_SPI1_SDO,
-	DM365_SPI1_SDI,
-	DM365_SPI1_SDENA0,
-	DM365_SPI1_SDENA1,
-
-	/* SPI2 */
-	DM365_SPI2_SCLK,
-	DM365_SPI2_SDO,
-	DM365_SPI2_SDI,
-	DM365_SPI2_SDENA0,
-	DM365_SPI2_SDENA1,
-
-	/* SPI3 */
-	DM365_SPI3_SCLK,
-	DM365_SPI3_SDO,
-	DM365_SPI3_SDI,
-	DM365_SPI3_SDENA0,
-	DM365_SPI3_SDENA1,
-
-	/* SPI4 */
-	DM365_SPI4_SCLK,
-	DM365_SPI4_SDO,
-	DM365_SPI4_SDI,
-	DM365_SPI4_SDENA0,
-	DM365_SPI4_SDENA1,
-
-	/* Clock */
-	DM365_CLKOUT0,
-	DM365_CLKOUT1,
-	DM365_CLKOUT2,
-
-	/* GPIO */
-	DM365_GPIO20,
-	DM365_GPIO30,
-	DM365_GPIO31,
-	DM365_GPIO32,
-	DM365_GPIO33,
-	DM365_GPIO40,
-	DM365_GPIO64_57,
-
-	/* Video */
-	DM365_VOUT_FIELD,
-	DM365_VOUT_FIELD_G81,
-	DM365_VOUT_HVSYNC,
-	DM365_VOUT_COUTL_EN,
-	DM365_VOUT_COUTH_EN,
-	DM365_VIN_CAM_WEN,
-	DM365_VIN_CAM_VD,
-	DM365_VIN_CAM_HD,
-	DM365_VIN_YIN4_7_EN,
-	DM365_VIN_YIN0_3_EN,
-
-	/* IRQ muxing */
-	DM365_INT_EDMA_CC,
-	DM365_INT_EDMA_TC0_ERR,
-	DM365_INT_EDMA_TC1_ERR,
-	DM365_INT_EDMA_TC2_ERR,
-	DM365_INT_EDMA_TC3_ERR,
-	DM365_INT_PRTCSS,
-	DM365_INT_EMAC_RXTHRESH,
-	DM365_INT_EMAC_RXPULSE,
-	DM365_INT_EMAC_TXPULSE,
-	DM365_INT_EMAC_MISCPULSE,
-	DM365_INT_IMX0_ENABLE,
-	DM365_INT_IMX0_DISABLE,
-	DM365_INT_HDVICP_ENABLE,
-	DM365_INT_HDVICP_DISABLE,
-	DM365_INT_IMX1_ENABLE,
-	DM365_INT_IMX1_DISABLE,
-	DM365_INT_NSF_ENABLE,
-	DM365_INT_NSF_DISABLE,
-
-	/* EDMA event muxing */
-	DM365_EVT2_ASP_TX,
-	DM365_EVT3_ASP_RX,
-	DM365_EVT2_VC_TX,
-	DM365_EVT3_VC_RX,
-	DM365_EVT26_MMC0_RX,
-};
-
 enum da830_index {
 	DA830_GPIO7_14,
 	DA830_RTCK,
diff --git a/arch/arm/mach-davinci/psc.h b/arch/arm/mach-davinci/psc.h
index 68cd9d3fc82b..acfef063295f 100644
--- a/arch/arm/mach-davinci/psc.h
+++ b/arch/arm/mach-davinci/psc.h
@@ -70,70 +70,6 @@
 #define DAVINCI_LPSC_GEM		39
 #define DAVINCI_LPSC_IMCOP		40
 
-#define DM355_LPSC_TIMER3		5
-#define DM355_LPSC_SPI1			6
-#define DM355_LPSC_MMC_SD1		7
-#define DM355_LPSC_McBSP1		8
-#define DM355_LPSC_PWM3			10
-#define DM355_LPSC_SPI2			11
-#define DM355_LPSC_RTO			12
-#define DM355_LPSC_VPSS_DAC		41
-
-/* DM365 */
-#define DM365_LPSC_TIMER3	5
-#define DM365_LPSC_SPI1		6
-#define DM365_LPSC_MMC_SD1	7
-#define DM365_LPSC_McBSP1	8
-#define DM365_LPSC_PWM3		10
-#define DM365_LPSC_SPI2		11
-#define DM365_LPSC_RTO		12
-#define DM365_LPSC_TIMER4	17
-#define DM365_LPSC_SPI0		22
-#define DM365_LPSC_SPI3		38
-#define DM365_LPSC_SPI4		39
-#define DM365_LPSC_EMAC		40
-#define DM365_LPSC_VOICE_CODEC	44
-#define DM365_LPSC_DAC_CLK	46
-#define DM365_LPSC_VPSSMSTR	47
-#define DM365_LPSC_MJCP		50
-
-/*
- * LPSC Assignments
- */
-#define DM646X_LPSC_ARM		0
-#define DM646X_LPSC_C64X_CPU	1
-#define DM646X_LPSC_HDVICP0	2
-#define DM646X_LPSC_HDVICP1	3
-#define DM646X_LPSC_TPCC	4
-#define DM646X_LPSC_TPTC0	5
-#define DM646X_LPSC_TPTC1	6
-#define DM646X_LPSC_TPTC2	7
-#define DM646X_LPSC_TPTC3	8
-#define DM646X_LPSC_PCI		13
-#define DM646X_LPSC_EMAC	14
-#define DM646X_LPSC_VDCE	15
-#define DM646X_LPSC_VPSSMSTR	16
-#define DM646X_LPSC_VPSSSLV	17
-#define DM646X_LPSC_TSIF0	18
-#define DM646X_LPSC_TSIF1	19
-#define DM646X_LPSC_DDR_EMIF	20
-#define DM646X_LPSC_AEMIF	21
-#define DM646X_LPSC_McASP0	22
-#define DM646X_LPSC_McASP1	23
-#define DM646X_LPSC_CRGEN0	24
-#define DM646X_LPSC_CRGEN1	25
-#define DM646X_LPSC_UART0	26
-#define DM646X_LPSC_UART1	27
-#define DM646X_LPSC_UART2	28
-#define DM646X_LPSC_PWM0	29
-#define DM646X_LPSC_PWM1	30
-#define DM646X_LPSC_I2C		31
-#define DM646X_LPSC_SPI		32
-#define DM646X_LPSC_GPIO	33
-#define DM646X_LPSC_TIMER0	34
-#define DM646X_LPSC_TIMER1	35
-#define DM646X_LPSC_ARM_INTC	45
-
 /* PSC0 defines */
 #define DA8XX_LPSC0_TPCC		0
 #define DA8XX_LPSC0_TPTC0		1
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
deleted file mode 100644
index 7f7814807bb5..000000000000
--- a/arch/arm/mach-davinci/serial.c
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * TI DaVinci serial driver
- *
- * Copyright (C) 2006 Texas Instruments.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_reg.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "serial.h"
-#include "cputype.h"
-
-static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
-				    int value)
-{
-	offset <<= p->regshift;
-
-	WARN_ONCE(!p->membase, "unmapped write: uart[%d]\n", offset);
-
-	__raw_writel(value, p->membase + offset);
-}
-
-static void __init davinci_serial_reset(struct plat_serial8250_port *p)
-{
-	unsigned int pwremu = 0;
-
-	serial_write_reg(p, UART_IER, 0);  /* disable all interrupts */
-
-	/* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */
-	serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu);
-	mdelay(10);
-
-	pwremu |= (0x3 << 13);
-	pwremu |= 0x1;
-	serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu);
-
-	if (cpu_is_davinci_dm646x())
-		serial_write_reg(p, UART_DM646X_SCR,
-				 UART_DM646X_SCR_TX_WATERMARK);
-}
-
-int __init davinci_serial_init(struct platform_device *serial_dev)
-{
-	int i, ret = 0;
-	struct device *dev;
-	struct plat_serial8250_port *p;
-	struct clk *clk;
-
-	/*
-	 * Make sure the serial ports are muxed on at this point.
-	 * You have to mux them off in device drivers later on if not needed.
-	 */
-	for (i = 0; serial_dev[i].dev.platform_data != NULL; i++) {
-		dev = &serial_dev[i].dev;
-		p = dev->platform_data;
-
-		ret = platform_device_register(&serial_dev[i]);
-		if (ret)
-			continue;
-
-		clk = clk_get(dev, NULL);
-		if (IS_ERR(clk)) {
-			pr_err("%s:%d: failed to get UART%d clock\n",
-			       __func__, __LINE__, i);
-			continue;
-		}
-
-		clk_prepare_enable(clk);
-
-		p->uartclk = clk_get_rate(clk);
-
-		if (!p->membase && p->mapbase) {
-			p->membase = ioremap(p->mapbase, SZ_4K);
-
-			if (p->membase)
-				p->flags &= ~UPF_IOREMAP;
-			else
-				pr_err("uart regs ioremap failed\n");
-		}
-
-		if (p->membase && p->type != PORT_AR7)
-			davinci_serial_reset(p);
-	}
-	return ret;
-}
diff --git a/arch/arm/mach-davinci/serial.h b/arch/arm/mach-davinci/serial.h
deleted file mode 100644
index c4a4ba553d45..000000000000
--- a/arch/arm/mach-davinci/serial.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * DaVinci serial device definitions
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc.
- */
-#ifndef __ASM_ARCH_SERIAL_H
-#define __ASM_ARCH_SERIAL_H
-
-#include <asm/memory.h>
-
-#include "hardware.h"
-
-#define DAVINCI_UART0_BASE	(IO_PHYS + 0x20000)
-#define DAVINCI_UART1_BASE	(IO_PHYS + 0x20400)
-#define DAVINCI_UART2_BASE	(IO_PHYS + 0x20800)
-
-#define DA8XX_UART0_BASE	(IO_PHYS + 0x042000)
-#define DA8XX_UART1_BASE	(IO_PHYS + 0x10c000)
-#define DA8XX_UART2_BASE	(IO_PHYS + 0x10d000)
-
-/* DaVinci UART register offsets */
-#define UART_DAVINCI_PWREMU		0x0c
-#define UART_DM646X_SCR			0x10
-#define UART_DM646X_SCR_TX_WATERMARK	0x08
-
-#ifndef __ASSEMBLY__
-#include <linux/platform_device.h>
-
-extern int davinci_serial_init(struct platform_device *);
-#endif
-
-#endif /* __ASM_ARCH_SERIAL_H */
diff --git a/arch/arm/mach-davinci/usb-da8xx.c b/arch/arm/mach-davinci/usb-da8xx.c
deleted file mode 100644
index 9c8fc5031907..000000000000
--- a/arch/arm/mach-davinci/usb-da8xx.c
+++ /dev/null
@@ -1,146 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * DA8xx USB
- */
-#include <linux/clk-provider.h>
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/mfd/da8xx-cfgchip.h>
-#include <linux/mfd/syscon.h>
-#include <linux/phy/phy.h>
-#include <linux/platform_data/clk-da8xx-cfgchip.h>
-#include <linux/platform_data/phy-da8xx-usb.h>
-#include <linux/platform_data/usb-davinci.h>
-#include <linux/platform_device.h>
-#include <linux/usb/musb.h>
-
-#include "common.h"
-#include "cputype.h"
-#include "da8xx.h"
-#include "irqs.h"
-
-#define DA8XX_USB0_BASE		0x01e00000
-#define DA8XX_USB1_BASE		0x01e25000
-
-#ifndef CONFIG_COMMON_CLK
-static struct clk *usb20_clk;
-#endif
-
-static struct da8xx_usb_phy_platform_data da8xx_usb_phy_pdata;
-
-static struct platform_device da8xx_usb_phy = {
-	.name		= "da8xx-usb-phy",
-	.id		= -1,
-	.dev		= {
-		/*
-		 * Setting init_name so that clock lookup will work in
-		 * da8xx_register_usb11_phy_clk() even if this device is not
-		 * registered yet.
-		 */
-		.init_name	= "da8xx-usb-phy",
-		.platform_data	= &da8xx_usb_phy_pdata,
-	},
-};
-
-int __init da8xx_register_usb_phy(void)
-{
-	da8xx_usb_phy_pdata.cfgchip = da8xx_get_cfgchip();
-
-	return platform_device_register(&da8xx_usb_phy);
-}
-
-static struct musb_hdrc_config musb_config = {
-	.multipoint	= true,
-	.num_eps	= 5,
-	.ram_bits	= 10,
-};
-
-static struct musb_hdrc_platform_data usb_data = {
-	/* OTG requires a Mini-AB connector */
-	.mode           = MUSB_OTG,
-	.clock		= "usb20",
-	.config		= &musb_config,
-};
-
-static struct resource da8xx_usb20_resources[] = {
-	{
-		.start		= DA8XX_USB0_BASE,
-		.end		= DA8XX_USB0_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= DAVINCI_INTC_IRQ(IRQ_DA8XX_USB_INT),
-		.flags		= IORESOURCE_IRQ,
-		.name		= "mc",
-	},
-};
-
-static u64 usb_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device da8xx_usb20_dev = {
-	.name		= "musb-da8xx",
-	.id             = -1,
-	.dev = {
-		.platform_data		= &usb_data,
-		.dma_mask		= &usb_dmamask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-	.resource	= da8xx_usb20_resources,
-	.num_resources	= ARRAY_SIZE(da8xx_usb20_resources),
-};
-
-int __init da8xx_register_usb20(unsigned int mA, unsigned int potpgt)
-{
-	usb_data.power	= mA > 510 ? 255 : mA / 2;
-	usb_data.potpgt = (potpgt + 1) / 2;
-
-	return platform_device_register(&da8xx_usb20_dev);
-}
-
-static struct resource da8xx_usb11_resources[] = {
-	[0] = {
-		.start	= DA8XX_USB1_BASE,
-		.end	= DA8XX_USB1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= DAVINCI_INTC_IRQ(IRQ_DA8XX_IRQN),
-		.end	= DAVINCI_INTC_IRQ(IRQ_DA8XX_IRQN),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 da8xx_usb11_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device da8xx_usb11_device = {
-	.name		= "ohci-da8xx",
-	.id		= -1,
-	.dev = {
-		.dma_mask		= &da8xx_usb11_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(da8xx_usb11_resources),
-	.resource	= da8xx_usb11_resources,
-};
-
-int __init da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata)
-{
-	da8xx_usb11_device.dev.platform_data = pdata;
-	return platform_device_register(&da8xx_usb11_device);
-}
-
-static struct platform_device da8xx_usb_phy_clks_device = {
-	.name		= "da830-usb-phy-clks",
-	.id		= -1,
-};
-
-int __init da8xx_register_usb_phy_clocks(void)
-{
-	struct da8xx_cfgchip_clk_platform_data pdata;
-
-	pdata.cfgchip = da8xx_get_cfgchip();
-	da8xx_usb_phy_clks_device.dev.platform_data = &pdata;
-
-	return platform_device_register(&da8xx_usb_phy_clks_device);
-}
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
deleted file mode 100644
index a9e5c6e91e5d..000000000000
--- a/arch/arm/mach-davinci/usb.c
+++ /dev/null
@@ -1,87 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * USB
- */
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/usb-davinci.h>
-#include <linux/usb/musb.h>
-
-#include "common.h"
-#include "cputype.h"
-#include "irqs.h"
-
-#define DAVINCI_USB_OTG_BASE	0x01c64000
-
-#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
-static struct musb_hdrc_config musb_config = {
-	.multipoint	= true,
-
-	.num_eps	= 5,
-	.ram_bits	= 10,
-};
-
-static struct musb_hdrc_platform_data usb_data = {
-	/* OTG requires a Mini-AB connector */
-	.mode           = MUSB_OTG,
-	.clock		= "usb",
-	.config		= &musb_config,
-};
-
-static struct resource usb_resources[] = {
-	{
-		/* physical address */
-		.start          = DAVINCI_USB_OTG_BASE,
-		.end            = DAVINCI_USB_OTG_BASE + 0x5ff,
-		.flags          = IORESOURCE_MEM,
-	},
-	{
-		.start          = DAVINCI_INTC_IRQ(IRQ_USBINT),
-		.flags          = IORESOURCE_IRQ,
-		.name		= "mc"
-	},
-	{
-		/* placeholder for the dedicated CPPI IRQ */
-		.flags          = IORESOURCE_IRQ,
-		.name		= "dma"
-	},
-};
-
-static u64 usb_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device usb_dev = {
-	.name           = "musb-davinci",
-	.id             = -1,
-	.dev = {
-		.platform_data		= &usb_data,
-		.dma_mask		= &usb_dmamask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-	.resource       = usb_resources,
-	.num_resources  = ARRAY_SIZE(usb_resources),
-};
-
-void __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms)
-{
-	usb_data.power = mA > 510 ? 255 : mA / 2;
-	usb_data.potpgt = (potpgt_ms + 1) / 2;
-
-	if (cpu_is_davinci_dm646x()) {
-		/* Override the defaults as DM6467 uses different IRQs. */
-		usb_dev.resource[1].start = DAVINCI_INTC_IRQ(IRQ_DM646X_USBINT);
-		usb_dev.resource[2].start = DAVINCI_INTC_IRQ(
-							IRQ_DM646X_USBDMAINT);
-	} else	/* other devices don't have dedicated CPPI IRQ */
-		usb_dev.num_resources = 2;
-
-	platform_device_register(&usb_dev);
-}
-
-#else
-
-void __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms)
-{
-}
-
-#endif  /* CONFIG_USB_MUSB_HDRC */
diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig
index 2252f465cafd..996888ffcfe7 100644
--- a/arch/arm/mach-dove/Kconfig
+++ b/arch/arm/mach-dove/Kconfig
@@ -18,14 +18,6 @@ if ARCH_DOVE
 config DOVE_LEGACY
 	bool
 
-config MACH_DOVE_DB
-	bool "Marvell DB-MV88AP510 Development Board"
-	select DOVE_LEGACY
-	select I2C_BOARDINFO if I2C
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell DB-MV88AP510 Development Board.
-
 config MACH_CM_A510
 	bool "CompuLab CM-A510 Board"
 	select DOVE_LEGACY
diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile
index da373a5768ba..0d31390be069 100644
--- a/arch/arm/mach-dove/Makefile
+++ b/arch/arm/mach-dove/Makefile
@@ -4,5 +4,4 @@ ccflags-y := -I$(srctree)/arch/arm/plat-orion/include
 obj-y				+= common.o
 obj-$(CONFIG_DOVE_LEGACY)	+= irq.o mpp.o
 obj-$(CONFIG_PCI)		+= pcie.o
-obj-$(CONFIG_MACH_DOVE_DB)	+= dove-db-setup.o
 obj-$(CONFIG_MACH_CM_A510)	+= cm-a510.o
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
deleted file mode 100644
index d5bf54040577..000000000000
--- a/arch/arm/mach-dove/dove-db-setup.c
+++ /dev/null
@@ -1,101 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-dove/dove-db-setup.c
- *
- * Marvell DB-MV88AP510-BP Development Board Setup
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/timer.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/i2c.h>
-#include <linux/pci.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "dove.h"
-#include "common.h"
-
-static struct mv643xx_eth_platform_data dove_db_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR_DEFAULT,
-};
-
-static struct mv_sata_platform_data dove_db_sata_data = {
-	.n_ports        = 1,
-};
-
-/*****************************************************************************
- * SPI Devices:
- * 	SPI0: 4M Flash ST-M25P32-VMF6P
- ****************************************************************************/
-static const struct flash_platform_data dove_db_spi_flash_data = {
-	.type		= "m25p64",
-};
-
-static struct spi_board_info __initdata dove_db_spi_flash_info[] = {
-	{
-		.modalias       = "m25p80",
-		.platform_data  = &dove_db_spi_flash_data,
-		.irq            = -1,
-		.max_speed_hz   = 20000000,
-		.bus_num        = 0,
-		.chip_select    = 0,
-	},
-};
-
-/*****************************************************************************
- * PCI
- ****************************************************************************/
-static int __init dove_db_pci_init(void)
-{
-	if (machine_is_dove_db())
-		dove_pcie_init(1, 1);
-
-	return 0;
-}
-
-subsys_initcall(dove_db_pci_init);
-
-/*****************************************************************************
- * Board Init
- ****************************************************************************/
-static void __init dove_db_init(void)
-{
-	/*
-	 * Basic Dove setup. Needs to be called early.
-	 */
-	dove_init();
-
-	dove_ge00_init(&dove_db_ge00_data);
-	dove_ehci0_init();
-	dove_ehci1_init();
-	dove_sata_init(&dove_db_sata_data);
-	dove_sdio0_init();
-	dove_sdio1_init();
-	dove_spi0_init();
-	dove_spi1_init();
-	dove_uart0_init();
-	dove_uart1_init();
-	dove_i2c_init();
-	spi_register_board_info(dove_db_spi_flash_info,
-				ARRAY_SIZE(dove_db_spi_flash_info));
-}
-
-MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
-	.atag_offset	= 0x100,
-	.nr_irqs	= DOVE_NR_IRQS,
-	.init_machine	= dove_db_init,
-	.map_io		= dove_map_io,
-	.init_early	= dove_init_early,
-	.init_irq	= dove_init_irq,
-	.init_time	= dove_timer_init,
-	.restart	= dove_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index 2c40996a444b..703f3d232a60 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -25,13 +25,6 @@ config EP93XX_SOC_COMMON
 
 comment "EP93xx Platforms"
 
-config MACH_ADSSPHERE
-	bool "Support ADS Sphere"
-	depends on UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the ADS
-	  Sphere board.
-
 config MACH_BK3
 	bool "Support Liebherr BK3.1"
 	select MACH_TS72XX
@@ -98,62 +91,6 @@ config MACH_EDB9315A
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9315A Evaluation Board.
 
-config MACH_GESBC9312
-	bool "Support Glomation GESBC-9312-sx"
-	depends on UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the Glomation
-	  GESBC-9312-sx board.
-
-config MACH_MICRO9
-	bool
-
-config MACH_MICRO9H
-	bool "Support Contec Micro9-High"
-	select MACH_MICRO9
-	depends on UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Contec Micro9-High board.
-
-config MACH_MICRO9M
-	bool "Support Contec Micro9-Mid"
-	select MACH_MICRO9
-	depends on UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Contec Micro9-Mid board.
-
-config MACH_MICRO9L
-	bool "Support Contec Micro9-Lite"
-	select MACH_MICRO9
-	depends on UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Contec Micro9-Lite board.
-
-config MACH_MICRO9S
-	bool "Support Contec Micro9-Slim"
-	select MACH_MICRO9
-	depends on UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Contec Micro9-Slim board.
-
-config MACH_SIM_ONE
-        bool "Support Simplemachines Sim.One board"
-	depends on UNUSED_BOARD_FILES
-        help
-          Say 'Y' here if you want your kernel to support the
-          Simplemachines Sim.One board.
-
-config MACH_SNAPPER_CL15
-	bool "Support Bluewater Systems Snapper CL15 Module"
-	depends on UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the Bluewater
-	  Systems Snapper CL15 Module.
-
 config MACH_TS72XX
 	bool "Support Technologic Systems TS-72xx SBC"
 	help
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index cfad517fac46..62e37403df14 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -6,11 +6,6 @@ obj-y			:= core.o clock.o timer-ep93xx.o
 
 obj-$(CONFIG_EP93XX_DMA)	+= dma.o
 
-obj-$(CONFIG_MACH_ADSSPHERE)	+= adssphere.o
 obj-$(CONFIG_MACH_EDB93XX)	+= edb93xx.o
-obj-$(CONFIG_MACH_GESBC9312)	+= gesbc9312.o
-obj-$(CONFIG_MACH_MICRO9)	+= micro9.o
-obj-$(CONFIG_MACH_SIM_ONE)	+= simone.o
-obj-$(CONFIG_MACH_SNAPPER_CL15)	+= snappercl15.o
 obj-$(CONFIG_MACH_TS72XX)	+= ts72xx.o
 obj-$(CONFIG_MACH_VISION_EP9307)+= vision_ep9307.o
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
deleted file mode 100644
index 0c48d3c5b8e7..000000000000
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/adssphere.c
- * ADS Sphere support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/sizes.h>
-
-#include "hardware.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-static struct ep93xx_eth_data __initdata adssphere_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init adssphere_init_machine(void)
-{
-	ep93xx_init_devices();
-	ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
-	ep93xx_register_eth(&adssphere_eth_data, 1);
-}
-
-MACHINE_START(ADSSPHERE, "ADS Sphere board")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= adssphere_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
deleted file mode 100644
index 0b7043e3e178..000000000000
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ /dev/null
@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/gesbc9312.c
- * Glomation GESBC-9312-sx support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/sizes.h>
-
-#include "hardware.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-static struct ep93xx_eth_data __initdata gesbc9312_eth_data = {
-	.phy_id		= 1,
-};
-
-static void __init gesbc9312_init_machine(void)
-{
-	ep93xx_init_devices();
-	ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_8M);
-	ep93xx_register_eth(&gesbc9312_eth_data, 0);
-}
-
-MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= gesbc9312_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
deleted file mode 100644
index c121c459aa17..000000000000
--- a/arch/arm/mach-ep93xx/micro9.c
+++ /dev/null
@@ -1,125 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-ep93xx/micro9.c
- *
- * Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH
- *                    Manfred Gruber <m.gruber@tirol.com>
- * Copyright (C) 2009 Contec Steuerungstechnik & Automation GmbH
- *                    Hubert Feurstein <hubert.feurstein@contec.at>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include "hardware.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-/*************************************************************************
- * Micro9 NOR Flash
- *
- * Micro9-High has up to 64MB of 32-bit flash on CS1
- * Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1
- * Micro9-Lite uses a separate MTD map driver for flash support
- * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
- *************************************************************************/
-static unsigned int __init micro9_detect_bootwidth(void)
-{
-	u32 v;
-
-	/* Detect the bus width of the external flash memory */
-	v = __raw_readl(EP93XX_SYSCON_SYSCFG);
-	if (v & EP93XX_SYSCON_SYSCFG_LCSN7)
-		return 4; /* 32-bit */
-	else
-		return 2; /* 16-bit */
-}
-
-static void __init micro9_register_flash(void)
-{
-	unsigned int width;
-
-	if (machine_is_micro9())
-		width = 4;
-	else if (machine_is_micro9m() || machine_is_micro9s())
-		width = micro9_detect_bootwidth();
-	else
-		width = 0;
-
-	if (width)
-		ep93xx_register_flash(width, EP93XX_CS1_PHYS_BASE, SZ_64M);
-}
-
-
-/*************************************************************************
- * Micro9 Ethernet
- *************************************************************************/
-static struct ep93xx_eth_data __initdata micro9_eth_data = {
-	.phy_id		= 0x1f,
-};
-
-
-static void __init micro9_init_machine(void)
-{
-	ep93xx_init_devices();
-	ep93xx_register_eth(&micro9_eth_data, 1);
-	micro9_register_flash();
-}
-
-
-#ifdef CONFIG_MACH_MICRO9H
-MACHINE_START(MICRO9, "Contec Micro9-High")
-	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= micro9_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_MICRO9M
-MACHINE_START(MICRO9M, "Contec Micro9-Mid")
-	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= micro9_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_MICRO9L
-MACHINE_START(MICRO9L, "Contec Micro9-Lite")
-	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= micro9_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_MICRO9S
-MACHINE_START(MICRO9S, "Contec Micro9-Slim")
-	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= micro9_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
deleted file mode 100644
index 569e72413561..000000000000
--- a/arch/arm/mach-ep93xx/simone.c
+++ /dev/null
@@ -1,128 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/simone.c
- * Simplemachines Sim.One support.
- *
- * Copyright (C) 2010 Ryan Mallon
- *
- * Based on the 2.6.24.7 support:
- *   Copyright (C) 2009 Simplemachines
- *   MMC support by Peter Ivanov <ivanovp@gmail.com>, 2007
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/mmc/host.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/mmc_spi.h>
-#include <linux/platform_data/video-ep93xx.h>
-#include <linux/platform_data/spi-ep93xx.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-
-#include "hardware.h"
-#include "gpio-ep93xx.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-static struct ep93xx_eth_data __initdata simone_eth_data = {
-	.phy_id		= 1,
-};
-
-static struct ep93xxfb_mach_info __initdata simone_fb_info = {
-	.flags		= EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
-};
-
-static struct mmc_spi_platform_data simone_mmc_spi_data = {
-	.detect_delay	= 500,
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-};
-
-static struct gpiod_lookup_table simone_mmc_spi_gpio_table = {
-	.dev_id = "mmc_spi.0", /* "mmc_spi" @ CS0 */
-	.table = {
-		/* Card detect */
-		GPIO_LOOKUP_IDX("A", 0, NULL, 0, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct spi_board_info simone_spi_devices[] __initdata = {
-	{
-		.modalias		= "mmc_spi",
-		.platform_data		= &simone_mmc_spi_data,
-		/*
-		 * We use 10 MHz even though the maximum is 3.7 MHz. The driver
-		 * will limit it automatically to max. frequency.
-		 */
-		.max_speed_hz		= 10 * 1000 * 1000,
-		.bus_num		= 0,
-		.chip_select		= 0,
-		.mode			= SPI_MODE_3,
-	},
-};
-
-/*
- * Up to v1.3, the Sim.One used SFRMOUT as SD card chip select, but this goes
- * low between multi-message command blocks. From v1.4, it uses a GPIO instead.
- * v1.3 parts will still work, since the signal on SFRMOUT is automatic.
- */
-static struct gpiod_lookup_table simone_spi_cs_gpio_table = {
-	.dev_id = "spi0",
-	.table = {
-		GPIO_LOOKUP("A", 1, "cs", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct ep93xx_spi_info simone_spi_info __initdata = {
-	.use_dma = 1,
-};
-
-static struct i2c_board_info __initdata simone_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("ds1337", 0x68),
-	},
-};
-
-static struct platform_device simone_audio_device = {
-	.name		= "simone-audio",
-	.id		= -1,
-};
-
-static void __init simone_register_audio(void)
-{
-	ep93xx_register_ac97();
-	platform_device_register(&simone_audio_device);
-}
-
-static void __init simone_init_machine(void)
-{
-	ep93xx_init_devices();
-	ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_8M);
-	ep93xx_register_eth(&simone_eth_data, 1);
-	ep93xx_register_fb(&simone_fb_info);
-	ep93xx_register_i2c(simone_i2c_board_info,
-			    ARRAY_SIZE(simone_i2c_board_info));
-	gpiod_add_lookup_table(&simone_mmc_spi_gpio_table);
-	gpiod_add_lookup_table(&simone_spi_cs_gpio_table);
-	ep93xx_register_spi(&simone_spi_info, simone_spi_devices,
-			    ARRAY_SIZE(simone_spi_devices));
-	simone_register_audio();
-}
-
-MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
-	/* Maintainer: Ryan Mallon */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= simone_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
deleted file mode 100644
index 1dfb725671b1..000000000000
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ /dev/null
@@ -1,162 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-ep93xx/snappercl15.c
- * Bluewater Systems Snapper CL15 system module
- *
- * Copyright (C) 2009 Bluewater Systems Ltd
- * Author: Ryan Mallon
- *
- * NAND code adapted from driver by:
- *   Andre Renaud <andre@bluewatersys.com>
- *   James R. McKaskill
- */
-
-#include <linux/platform_device.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/fb.h>
-
-#include <linux/mtd/platnand.h>
-
-#include "hardware.h"
-#include <linux/platform_data/video-ep93xx.h>
-#include "gpio-ep93xx.h"
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "soc.h"
-
-#define SNAPPERCL15_NAND_BASE	(EP93XX_CS7_PHYS_BASE + SZ_16M)
-
-#define SNAPPERCL15_NAND_WPN	(1 << 8)  /* Write protect (active low) */
-#define SNAPPERCL15_NAND_ALE	(1 << 9)  /* Address latch */
-#define SNAPPERCL15_NAND_CLE	(1 << 10) /* Command latch */
-#define SNAPPERCL15_NAND_CEN	(1 << 11) /* Chip enable (active low) */
-#define SNAPPERCL15_NAND_RDY	(1 << 14) /* Device ready */
-
-#define NAND_CTRL_ADDR(chip) 	(chip->legacy.IO_ADDR_W + 0x40)
-
-static void snappercl15_nand_cmd_ctrl(struct nand_chip *chip, int cmd,
-				      unsigned int ctrl)
-{
-	static u16 nand_state = SNAPPERCL15_NAND_WPN;
-	u16 set;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		set = SNAPPERCL15_NAND_CEN | SNAPPERCL15_NAND_WPN;
-
-		if (ctrl & NAND_NCE)
-			set &= ~SNAPPERCL15_NAND_CEN;
-		if (ctrl & NAND_CLE)
-			set |= SNAPPERCL15_NAND_CLE;
-		if (ctrl & NAND_ALE)
-			set |= SNAPPERCL15_NAND_ALE;
-
-		nand_state &= ~(SNAPPERCL15_NAND_CEN |
-				SNAPPERCL15_NAND_CLE |
-				SNAPPERCL15_NAND_ALE);
-		nand_state |= set;
-		__raw_writew(nand_state, NAND_CTRL_ADDR(chip));
-	}
-
-	if (cmd != NAND_CMD_NONE)
-		__raw_writew((cmd & 0xff) | nand_state,
-			     chip->legacy.IO_ADDR_W);
-}
-
-static int snappercl15_nand_dev_ready(struct nand_chip *chip)
-{
-	return !!(__raw_readw(NAND_CTRL_ADDR(chip)) & SNAPPERCL15_NAND_RDY);
-}
-
-static struct mtd_partition snappercl15_nand_parts[] = {
-	{
-		.name		= "Kernel",
-		.offset		= 0,
-		.size		= SZ_2M,
-	},
-	{
-		.name		= "Filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct platform_nand_data snappercl15_nand_data = {
-	.chip = {
-		.nr_chips		= 1,
-		.partitions		= snappercl15_nand_parts,
-		.nr_partitions		= ARRAY_SIZE(snappercl15_nand_parts),
-		.chip_delay		= 25,
-	},
-	.ctrl = {
-		.dev_ready		= snappercl15_nand_dev_ready,
-		.cmd_ctrl		= snappercl15_nand_cmd_ctrl,
-	},
-};
-
-static struct resource snappercl15_nand_resource[] = {
-	{
-		.start		= SNAPPERCL15_NAND_BASE,
-		.end		= SNAPPERCL15_NAND_BASE + SZ_4K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device snappercl15_nand_device = {
-	.name			= "gen_nand",
-	.id			= -1,
-	.dev.platform_data	= &snappercl15_nand_data,
-	.resource		= snappercl15_nand_resource,
-	.num_resources		= ARRAY_SIZE(snappercl15_nand_resource),
-};
-
-static struct ep93xx_eth_data __initdata snappercl15_eth_data = {
-	.phy_id			= 1,
-};
-
-static struct i2c_board_info __initdata snappercl15_i2c_data[] = {
-	{
-		/* Audio codec */
-		I2C_BOARD_INFO("tlv320aic23", 0x1a),
-	},
-};
-
-static struct ep93xxfb_mach_info __initdata snappercl15_fb_info = {
-};
-
-static struct platform_device snappercl15_audio_device = {
-	.name		= "snappercl15-audio",
-	.id		= -1,
-};
-
-static void __init snappercl15_register_audio(void)
-{
-	ep93xx_register_i2s();
-	platform_device_register(&snappercl15_audio_device);
-}
-
-static void __init snappercl15_init_machine(void)
-{
-	ep93xx_init_devices();
-	ep93xx_register_eth(&snappercl15_eth_data, 1);
-	ep93xx_register_i2c(snappercl15_i2c_data,
-			    ARRAY_SIZE(snappercl15_i2c_data));
-	ep93xx_register_fb(&snappercl15_fb_info);
-	snappercl15_register_audio();
-	platform_device_register(&snappercl15_nand_device);
-}
-
-MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
-	/* Maintainer: Ryan Mallon */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_EP93XX_IRQS,
-	.map_io		= ep93xx_map_io,
-	.init_irq	= ep93xx_init_irq,
-	.init_time	= ep93xx_timer_init,
-	.init_machine	= snappercl15_init_machine,
-	.restart	= ep93xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig
index b5e7cbfed119..78189997caa1 100644
--- a/arch/arm/mach-footbridge/Kconfig
+++ b/arch/arm/mach-footbridge/Kconfig
@@ -16,18 +16,6 @@ menuconfig ARCH_FOOTBRIDGE
 
 if ARCH_FOOTBRIDGE
 
-config ARCH_CATS
-	bool "CATS"
-	depends on UNUSED_BOARD_FILES
-	select CLKEVT_I8253
-	select CLKSRC_I8253
-	select ISA
-	select FORCE_PCI
-	help
-	  Say Y here if you intend to run this kernel on the CATS.
-
-	  Saying N will reduce the size of the Footbridge kernel.
-
 config ARCH_EBSA285_HOST
 	bool "EBSA285 (host mode)"
 	select ARCH_EBSA285
diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile
index 55d570739f19..1553cc01b45c 100644
--- a/arch/arm/mach-footbridge/Makefile
+++ b/arch/arm/mach-footbridge/Makefile
@@ -8,11 +8,9 @@
 obj-y			:= common.o isa-irq.o isa.o isa-rtc.o dma-isa.o
 
 pci-y			+= dc21285.o
-pci-$(CONFIG_ARCH_CATS) += cats-pci.o
 pci-$(CONFIG_ARCH_EBSA285) += ebsa285-pci.o
 pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o
 
-obj-$(CONFIG_ARCH_CATS) += cats-hw.o isa-timer.o
 obj-$(CONFIG_ARCH_EBSA285) += ebsa285.o dc21285-timer.o
 obj-$(CONFIG_ARCH_NETWINDER) += netwinder-hw.o isa-timer.o
 
diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c
deleted file mode 100644
index e575dc0698cd..000000000000
--- a/arch/arm/mach-footbridge/cats-hw.c
+++ /dev/null
@@ -1,98 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/arm/mach-footbridge/cats-hw.c
- *
- * CATS machine fixup
- *
- * Copyright (C) 1998, 1999 Russell King, Phil Blundell
- */
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/screen_info.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-
-#include <asm/hardware/dec21285.h>
-#include <asm/mach-types.h>
-#include <asm/setup.h>
-
-#include <asm/mach/arch.h>
-
-#include "common.h"
-
-#define CFG_PORT	0x370
-#define INDEX_PORT	(CFG_PORT)
-#define DATA_PORT	(CFG_PORT + 1)
-
-static int __init cats_hw_init(void)
-{
-	if (machine_is_cats()) {
-		/* Set Aladdin to CONFIGURE mode */
-		outb(0x51, CFG_PORT);
-		outb(0x23, CFG_PORT);
-
-		/* Select logical device 3 */
-		outb(0x07, INDEX_PORT);
-		outb(0x03, DATA_PORT);
-
-		/* Set parallel port to DMA channel 3, ECP+EPP1.9, 
-		   enable EPP timeout */
-		outb(0x74, INDEX_PORT);
-		outb(0x03, DATA_PORT);
-	
-		outb(0xf0, INDEX_PORT);
-		outb(0x0f, DATA_PORT);
-
-		outb(0xf1, INDEX_PORT);
-		outb(0x07, DATA_PORT);
-
-		/* Select logical device 4 */
-		outb(0x07, INDEX_PORT);
-		outb(0x04, DATA_PORT);
-
-		/* UART1 high speed mode */
-		outb(0xf0, INDEX_PORT);
-		outb(0x02, DATA_PORT);
-
-		/* Select logical device 5 */
-		outb(0x07, INDEX_PORT);
-		outb(0x05, DATA_PORT);
-
-		/* UART2 high speed mode */
-		outb(0xf0, INDEX_PORT);
-		outb(0x02, DATA_PORT);
-
-		/* Set Aladdin to RUN mode */
-		outb(0xbb, CFG_PORT);
-	}
-
-	return 0;
-}
-
-__initcall(cats_hw_init);
-
-/*
- * CATS uses soft-reboot by default, since
- * hard reboots fail on early boards.
- */
-static void __init
-fixup_cats(struct tag *tags, char **cmdline)
-{
-#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
-	screen_info.orig_video_lines  = 25;
-	screen_info.orig_video_points = 16;
-	screen_info.orig_y = 24;
-#endif
-}
-
-MACHINE_START(CATS, "Chalice-CATS")
-	/* Maintainer: Philip Blundell */
-	.atag_offset	= 0x100,
-	.reboot_mode	= REBOOT_SOFT,
-	.fixup		= fixup_cats,
-	.map_io		= footbridge_map_io,
-	.init_irq	= footbridge_init_irq,
-	.init_time	= isa_timer_init,
-	.restart	= footbridge_restart,
-MACHINE_END
diff --git a/arch/arm/mach-footbridge/cats-pci.c b/arch/arm/mach-footbridge/cats-pci.c
deleted file mode 100644
index 90b1e9be430e..000000000000
--- a/arch/arm/mach-footbridge/cats-pci.c
+++ /dev/null
@@ -1,64 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/arm/mach-footbridge/cats-pci.c
- *
- * PCI bios-type initialisation for PCI machines
- *
- * Bits taken from various places.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-/* cats host-specific stuff */
-static int irqmap_cats[] = { IRQ_PCI, IRQ_IN0, IRQ_IN1, IRQ_IN3 };
-
-static u8 cats_no_swizzle(struct pci_dev *dev, u8 *pin)
-{
-	return 0;
-}
-
-static int cats_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	if (dev->irq >= 255)
-		return -1;	/* not a valid interrupt. */
-
-	if (dev->irq >= 128)
-		return dev->irq & 0x1f;
-
-	if (dev->irq >= 1 && dev->irq <= 4)
-		return irqmap_cats[dev->irq - 1];
-
-	if (dev->irq != 0)
-		printk("PCI: device %02x:%02x has unknown irq line %x\n",
-		       dev->bus->number, dev->devfn, dev->irq);
-
-	return -1;
-}
-
-/*
- * why not the standard PCI swizzle?  does this prevent 4-port tulip
- * cards being used (ie, pci-pci bridge based cards)?
- */
-static struct hw_pci cats_pci __initdata = {
-	.swizzle		= cats_no_swizzle,
-	.map_irq		= cats_map_irq,
-	.nr_controllers		= 1,
-	.ops			= &dc21285_ops,
-	.setup			= dc21285_setup,
-	.preinit		= dc21285_preinit,
-	.postinit		= dc21285_postinit,
-};
-
-static int __init cats_pci_init(void)
-{
-	if (machine_is_cats())
-		pci_common_init(&cats_pci);
-	return 0;
-}
-
-subsys_initcall(cats_pci_init);
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index 629e4676ed77..85c598708c10 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -206,9 +206,6 @@ void __init footbridge_init_irq(void)
 		 */
 		isa_init_irq(IRQ_PCI);
 
-	if (machine_is_cats())
-		isa_init_irq(IRQ_IN2);
-
 	if (machine_is_netwinder())
 		isa_init_irq(IRQ_IN3);
 }
diff --git a/arch/arm/mach-iop32x/Kconfig b/arch/arm/mach-iop32x/Kconfig
deleted file mode 100644
index 761fbb04faa1..000000000000
--- a/arch/arm/mach-iop32x/Kconfig
+++ /dev/null
@@ -1,54 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-menuconfig ARCH_IOP32X
-	bool "IOP32x-based platforms"
-	depends on ARCH_MULTI_V5
-	depends on CPU_LITTLE_ENDIAN
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select CPU_XSCALE
-	select GPIO_IOP
-	select GPIOLIB
-	select FORCE_PCI
-	help
-	  Support for Intel's 80219 and IOP32X (XScale) family of
-	  processors.
-
-if ARCH_IOP32X
-
-config MACH_EP80219
-	bool
-
-config MACH_GLANTANK
-	bool "Enable support for the IO-Data GLAN Tank"
-	help
-	  Say Y here if you want to run your kernel on the GLAN Tank
-	  NAS appliance or machines from IO-Data's HDL-Gxxx, HDL-GWxxx
-	  and HDL-GZxxx series.
-
-config ARCH_IQ80321
-	bool "Enable support for IQ80321"
-	help
-	  Say Y here if you want to run your kernel on the Intel IQ80321
-	  evaluation kit for the IOP321 processor.
-
-config ARCH_IQ31244
-	bool "Enable support for EP80219/IQ31244"
-	select MACH_EP80219
-	help
-	  Say Y here if you want to run your kernel on the Intel EP80219
-	  evaluation kit for the Intel 80219 processor (a IOP321 variant)
-	  or the IQ31244 evaluation kit for the IOP321 processor.
-
-config MACH_N2100
-	bool "Enable support for the Thecus n2100"
-	help
-	  Say Y here if you want to run your kernel on the Thecus n2100
-	  NAS appliance.
-
-config MACH_EM7210
-	bool "Enable support for the Lanner EM7210"
-	help
-	  Say Y here if you want to run your kernel on the Lanner EM7210
-	  board. Say also Y here if you have a SS4000e Baxter Creek NAS
-	  appliance."
-
-endif
diff --git a/arch/arm/mach-iop32x/Makefile b/arch/arm/mach-iop32x/Makefile
deleted file mode 100644
index c8018ef5c6a9..000000000000
--- a/arch/arm/mach-iop32x/Makefile
+++ /dev/null
@@ -1,20 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the linux kernel.
-#
-
-obj-$(CONFIG_ARCH_IOP32X) += irq.o
-obj-$(CONFIG_ARCH_IOP32X) += i2c.o
-obj-$(CONFIG_ARCH_IOP32X) += pci.o
-obj-$(CONFIG_ARCH_IOP32X) += setup.o
-obj-$(CONFIG_ARCH_IOP32X) += time.o
-obj-$(CONFIG_ARCH_IOP32X) += cp6.o
-obj-$(CONFIG_ARCH_IOP32X) += adma.o
-obj-$(CONFIG_ARCH_IOP32X) += pmu.o
-obj-$(CONFIG_ARCH_IOP32X) += restart.o
-
-obj-$(CONFIG_MACH_GLANTANK) += glantank.o
-obj-$(CONFIG_ARCH_IQ80321) += iq80321.o
-obj-$(CONFIG_ARCH_IQ31244) += iq31244.o
-obj-$(CONFIG_MACH_N2100) += n2100.o
-obj-$(CONFIG_MACH_EM7210) += em7210.o
diff --git a/arch/arm/mach-iop32x/adma.c b/arch/arm/mach-iop32x/adma.c
deleted file mode 100644
index 764bcbff98df..000000000000
--- a/arch/arm/mach-iop32x/adma.c
+++ /dev/null
@@ -1,163 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform device definitions for the iop3xx dma/xor engines
- * Copyright © 2006, Intel Corporation.
- */
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_data/dma-iop32x.h>
-
-#include "iop3xx.h"
-#include "irqs.h"
-
-#define IRQ_DMA0_EOT IRQ_IOP32X_DMA0_EOT
-#define IRQ_DMA0_EOC IRQ_IOP32X_DMA0_EOC
-#define IRQ_DMA0_ERR IRQ_IOP32X_DMA0_ERR
-
-#define IRQ_DMA1_EOT IRQ_IOP32X_DMA1_EOT
-#define IRQ_DMA1_EOC IRQ_IOP32X_DMA1_EOC
-#define IRQ_DMA1_ERR IRQ_IOP32X_DMA1_ERR
-
-#define IRQ_AA_EOT IRQ_IOP32X_AA_EOT
-#define IRQ_AA_EOC IRQ_IOP32X_AA_EOC
-#define IRQ_AA_ERR IRQ_IOP32X_AA_ERR
-
-/* AAU and DMA Channels */
-static struct resource iop3xx_dma_0_resources[] = {
-	[0] = {
-		.start = IOP3XX_DMA_PHYS_BASE(0),
-		.end = IOP3XX_DMA_UPPER_PA(0),
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_DMA0_EOT,
-		.end = IRQ_DMA0_EOT,
-		.flags = IORESOURCE_IRQ
-	},
-	[2] = {
-		.start = IRQ_DMA0_EOC,
-		.end = IRQ_DMA0_EOC,
-		.flags = IORESOURCE_IRQ
-	},
-	[3] = {
-		.start = IRQ_DMA0_ERR,
-		.end = IRQ_DMA0_ERR,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct resource iop3xx_dma_1_resources[] = {
-	[0] = {
-		.start = IOP3XX_DMA_PHYS_BASE(1),
-		.end = IOP3XX_DMA_UPPER_PA(1),
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_DMA1_EOT,
-		.end = IRQ_DMA1_EOT,
-		.flags = IORESOURCE_IRQ
-	},
-	[2] = {
-		.start = IRQ_DMA1_EOC,
-		.end = IRQ_DMA1_EOC,
-		.flags = IORESOURCE_IRQ
-	},
-	[3] = {
-		.start = IRQ_DMA1_ERR,
-		.end = IRQ_DMA1_ERR,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-
-static struct resource iop3xx_aau_resources[] = {
-	[0] = {
-		.start = IOP3XX_AAU_PHYS_BASE,
-		.end = IOP3XX_AAU_UPPER_PA,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_AA_EOT,
-		.end = IRQ_AA_EOT,
-		.flags = IORESOURCE_IRQ
-	},
-	[2] = {
-		.start = IRQ_AA_EOC,
-		.end = IRQ_AA_EOC,
-		.flags = IORESOURCE_IRQ
-	},
-	[3] = {
-		.start = IRQ_AA_ERR,
-		.end = IRQ_AA_ERR,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static u64 iop3xx_adma_dmamask = DMA_BIT_MASK(32);
-
-static struct iop_adma_platform_data iop3xx_dma_0_data = {
-	.hw_id = DMA0_ID,
-	.pool_size = PAGE_SIZE,
-};
-
-static struct iop_adma_platform_data iop3xx_dma_1_data = {
-	.hw_id = DMA1_ID,
-	.pool_size = PAGE_SIZE,
-};
-
-static struct iop_adma_platform_data iop3xx_aau_data = {
-	.hw_id = AAU_ID,
-	.pool_size = 3 * PAGE_SIZE,
-};
-
-struct platform_device iop3xx_dma_0_channel = {
-	.name = "iop-adma",
-	.id = 0,
-	.num_resources = 4,
-	.resource = iop3xx_dma_0_resources,
-	.dev = {
-		.dma_mask = &iop3xx_adma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = (void *) &iop3xx_dma_0_data,
-	},
-};
-
-struct platform_device iop3xx_dma_1_channel = {
-	.name = "iop-adma",
-	.id = 1,
-	.num_resources = 4,
-	.resource = iop3xx_dma_1_resources,
-	.dev = {
-		.dma_mask = &iop3xx_adma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = (void *) &iop3xx_dma_1_data,
-	},
-};
-
-struct platform_device iop3xx_aau_channel = {
-	.name = "iop-adma",
-	.id = 2,
-	.num_resources = 4,
-	.resource = iop3xx_aau_resources,
-	.dev = {
-		.dma_mask = &iop3xx_adma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = (void *) &iop3xx_aau_data,
-	},
-};
-
-static int __init iop3xx_adma_cap_init(void)
-{
-	dma_cap_set(DMA_MEMCPY, iop3xx_dma_0_data.cap_mask);
-	dma_cap_set(DMA_INTERRUPT, iop3xx_dma_0_data.cap_mask);
-
-	dma_cap_set(DMA_MEMCPY, iop3xx_dma_1_data.cap_mask);
-	dma_cap_set(DMA_INTERRUPT, iop3xx_dma_1_data.cap_mask);
-
-	dma_cap_set(DMA_XOR, iop3xx_aau_data.cap_mask);
-	dma_cap_set(DMA_INTERRUPT, iop3xx_aau_data.cap_mask);
-
-	return 0;
-}
-
-arch_initcall(iop3xx_adma_cap_init);
diff --git a/arch/arm/mach-iop32x/cp6.c b/arch/arm/mach-iop32x/cp6.c
deleted file mode 100644
index 7135a0ac9949..000000000000
--- a/arch/arm/mach-iop32x/cp6.c
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * IOP Coprocessor-6 access handler
- * Copyright (c) 2006, Intel Corporation.
- */
-#include <linux/init.h>
-#include <asm/traps.h>
-#include <asm/ptrace.h>
-
-#include "iop3xx.h"
-
-void iop_enable_cp6(void)
-{
-	u32 temp;
-
-        /* enable cp6 access */
-        asm volatile (
-		"mrc	p15, 0, %0, c15, c1, 0\n\t"
-		"orr	%0, %0, #(1 << 6)\n\t"
-		"mcr	p15, 0, %0, c15, c1, 0\n\t"
-		"mrc	p15, 0, %0, c15, c1, 0\n\t"
-		"mov	%0, %0\n\t"
-		"sub	pc, pc, #4  @ cp_wait\n\t"
-		: "=r"(temp));
-}
-
-static int cp6_trap(struct pt_regs *regs, unsigned int instr)
-{
-	iop_enable_cp6();
-
-	return 0;
-}
-
-/* permit kernel space cp6 access
- * deny user space cp6 access
- */
-static struct undef_hook cp6_hook = {
-	.instr_mask     = 0x0f000ff0,
-	.instr_val      = 0x0e000610,
-	.cpsr_mask      = MODE_MASK,
-	.cpsr_val       = SVC_MODE,
-	.fn             = cp6_trap,
-};
-
-void __init iop_init_cp6_handler(void)
-{
-	register_undef_hook(&cp6_hook);
-}
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
deleted file mode 100644
index ac130aba5a6e..000000000000
--- a/arch/arm/mach-iop32x/em7210.c
+++ /dev/null
@@ -1,232 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-iop32x/em7210.c
- *
- * Board support code for the Lanner EM7210 platforms.
- *
- * Based on arch/arm/mach-iop32x/iq31244.c file.
- *
- * Copyright (C) 2007 Arnaud Patard <arnaud.patard@rtp-net.org>
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-
-#include "hardware.h"
-#include "gpio-iop32x.h"
-#include "irqs.h"
-
-static void __init em7210_timer_init(void)
-{
-	/* http://www.kwaak.net/fotos/fotos-nas/slide_24.html */
-	/* 33.333 MHz crystal.                                */
-	iop_init_time(200000000);
-}
-
-/*
- * EM7210 RTC
- */
-static struct i2c_board_info __initdata em7210_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("rs5c372a", 0x32),
-	},
-};
-
-/*
- * EM7210 I/O
- */
-static struct map_desc em7210_io_desc[] __initdata = {
-	{	/* on-board devices */
-		.virtual	= IQ31244_UART,
-		.pfn		= __phys_to_pfn(IQ31244_UART),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE,
-	},
-};
-
-void __init em7210_map_io(void)
-{
-	iop3xx_map_io();
-	iotable_init(em7210_io_desc, ARRAY_SIZE(em7210_io_desc));
-}
-
-
-/*
- * EM7210 PCI
- */
-#define INTA	IRQ_IOP32X_XINT0
-#define INTB	IRQ_IOP32X_XINT1
-#define INTC	IRQ_IOP32X_XINT2
-#define INTD	IRQ_IOP32X_XINT3
-
-static int __init
-em7210_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static int pci_irq_table[][4] = {
-		/*
-		 * PCI IDSEL/INTPIN->INTLINE
-		 * A       B       C       D
-		 */
-		{INTB, INTB, INTB, INTB}, /* console / uart */
-		{INTA, INTA, INTA, INTA}, /* 1st 82541      */
-		{INTD, INTD, INTD, INTD}, /* 2nd 82541      */
-		{INTC, INTC, INTC, INTC}, /* GD31244        */
-		{INTD, INTA, INTA, INTA}, /* mini-PCI       */
-		{INTD, INTC, INTA, INTA}, /* NEC USB        */
-	};
-
-	if (pin < 1 || pin > 4)
-		return -1;
-
-	return pci_irq_table[slot % 6][pin - 1];
-}
-
-static struct hw_pci em7210_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &iop3xx_ops,
-	.setup		= iop3xx_pci_setup,
-	.preinit	= iop3xx_pci_preinit,
-	.map_irq	= em7210_pci_map_irq,
-};
-
-static int __init em7210_pci_init(void)
-{
-	if (machine_is_em7210())
-		pci_common_init(&em7210_pci);
-
-	return 0;
-}
-
-subsys_initcall(em7210_pci_init);
-
-
-/*
- * EM7210 Flash
- */
-static struct physmap_flash_data em7210_flash_data = {
-	.width		= 2,
-};
-
-static struct resource em7210_flash_resource = {
-	.start		= 0xf0000000,
-	.end		= 0xf1ffffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device em7210_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &em7210_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &em7210_flash_resource,
-};
-
-
-/*
- * EM7210 UART
- * The physical address of the serial port is 0xfe800000,
- * so it can be used for physical and virtual address.
- */
-static struct plat_serial8250_port em7210_serial_port[] = {
-	{
-		.mapbase	= IQ31244_UART,
-		.membase	= (char *)IQ31244_UART,
-		.irq		= IRQ_IOP32X_XINT1,
-		.flags		= UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= 1843200,
-	},
-	{ },
-};
-
-static struct resource em7210_uart_resource = {
-	.start		= IQ31244_UART,
-	.end		= IQ31244_UART + 7,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device em7210_serial_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev		= {
-		.platform_data		= em7210_serial_port,
-	},
-	.num_resources	= 1,
-	.resource	= &em7210_uart_resource,
-};
-
-#define EM7210_HARDWARE_POWER 0
-
-void em7210_power_off(void)
-{
-	int ret;
-
-	ret = gpio_direction_output(EM7210_HARDWARE_POWER, 1);
-	if (ret)
-		pr_crit("could not drive power off GPIO high\n");
-}
-
-static int __init em7210_request_gpios(void)
-{
-	int ret;
-
-	if (!machine_is_em7210())
-		return 0;
-
-	ret = gpio_request(EM7210_HARDWARE_POWER, "power");
-	if (ret) {
-		pr_err("could not request power off GPIO\n");
-		return 0;
-	}
-
-	pm_power_off = em7210_power_off;
-
-	return 0;
-}
-device_initcall(em7210_request_gpios);
-
-static void __init em7210_init_machine(void)
-{
-	register_iop32x_gpio();
-	platform_device_register(&em7210_serial_device);
-	gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup);
-	gpiod_add_lookup_table(&iop3xx_i2c1_gpio_lookup);
-	platform_device_register(&iop3xx_i2c0_device);
-	platform_device_register(&iop3xx_i2c1_device);
-	platform_device_register(&em7210_flash_device);
-	platform_device_register(&iop3xx_dma_0_channel);
-	platform_device_register(&iop3xx_dma_1_channel);
-
-	i2c_register_board_info(0, em7210_i2c_devices,
-		ARRAY_SIZE(em7210_i2c_devices));
-}
-
-MACHINE_START(EM7210, "Lanner EM7210")
-	.atag_offset	= 0x100,
-	.nr_irqs	= IOP32X_NR_IRQS,
-	.map_io		= em7210_map_io,
-	.init_irq	= iop32x_init_irq,
-	.init_time	= em7210_timer_init,
-	.init_machine	= em7210_init_machine,
-	.restart	= iop3xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
deleted file mode 100644
index cd6e7da2ea10..000000000000
--- a/arch/arm/mach-iop32x/glantank.c
+++ /dev/null
@@ -1,214 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-iop32x/glantank.c
- *
- * Board support code for the GLAN Tank.
- *
- * Copyright (C) 2006, 2007 Martin Michlmayr <tbm@cyrius.com>
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/f75375s.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio/machine.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-
-#include "hardware.h"
-#include "gpio-iop32x.h"
-#include "irqs.h"
-
-/*
- * GLAN Tank timer tick configuration.
- */
-static void __init glantank_timer_init(void)
-{
-	/* 33.333 MHz crystal.  */
-	iop_init_time(200000000);
-}
-
-
-/*
- * GLAN Tank I/O.
- */
-static struct map_desc glantank_io_desc[] __initdata = {
-	{	/* on-board devices */
-		.virtual	= GLANTANK_UART,
-		.pfn		= __phys_to_pfn(GLANTANK_UART),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	},
-};
-
-void __init glantank_map_io(void)
-{
-	iop3xx_map_io();
-	iotable_init(glantank_io_desc, ARRAY_SIZE(glantank_io_desc));
-}
-
-
-/*
- * GLAN Tank PCI.
- */
-#define INTA	IRQ_IOP32X_XINT0
-#define INTB	IRQ_IOP32X_XINT1
-#define INTC	IRQ_IOP32X_XINT2
-#define INTD	IRQ_IOP32X_XINT3
-
-static int __init
-glantank_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static int pci_irq_table[][4] = {
-		/*
-		 * PCI IDSEL/INTPIN->INTLINE
-		 * A       B       C       D
-		 */
-		{INTD, INTD, INTD, INTD}, /* UART (8250) */
-		{INTA, INTA, INTA, INTA}, /* Ethernet (E1000) */
-		{INTB, INTB, INTB, INTB}, /* IDE (AEC6280R) */
-		{INTC, INTC, INTC, INTC}, /* USB (NEC) */
-	};
-
-	BUG_ON(pin < 1 || pin > 4);
-
-	return pci_irq_table[slot % 4][pin - 1];
-}
-
-static struct hw_pci glantank_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &iop3xx_ops,
-	.setup		= iop3xx_pci_setup,
-	.preinit	= iop3xx_pci_preinit,
-	.map_irq	= glantank_pci_map_irq,
-};
-
-static int __init glantank_pci_init(void)
-{
-	if (machine_is_glantank())
-		pci_common_init(&glantank_pci);
-
-	return 0;
-}
-
-subsys_initcall(glantank_pci_init);
-
-
-/*
- * GLAN Tank machine initialization.
- */
-static struct physmap_flash_data glantank_flash_data = {
-	.width		= 2,
-};
-
-static struct resource glantank_flash_resource = {
-	.start		= 0xf0000000,
-	.end		= 0xf007ffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device glantank_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &glantank_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &glantank_flash_resource,
-};
-
-static struct plat_serial8250_port glantank_serial_port[] = {
-	{
-		.mapbase	= GLANTANK_UART,
-		.membase	= (char *)GLANTANK_UART,
-		.irq		= IRQ_IOP32X_XINT3,
-		.flags		= UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= 1843200,
-	},
-	{ },
-};
-
-static struct resource glantank_uart_resource = {
-	.start		= GLANTANK_UART,
-	.end		= GLANTANK_UART + 7,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device glantank_serial_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev		= {
-		.platform_data		= glantank_serial_port,
-	},
-	.num_resources	= 1,
-	.resource	= &glantank_uart_resource,
-};
-
-static struct f75375s_platform_data glantank_f75375s = {
-	.pwm		= { 255, 255 },
-	.pwm_enable	= { 0, 0 },
-};
-
-static struct i2c_board_info __initdata glantank_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("rs5c372a", 0x32),
-	},
-	{
-		I2C_BOARD_INFO("f75375", 0x2e),
-		.platform_data = &glantank_f75375s,
-	},
-};
-
-static void glantank_power_off(void)
-{
-	__raw_writeb(0x01, IOMEM(0xfe8d0004));
-
-	while (1)
-		;
-}
-
-static void __init glantank_init_machine(void)
-{
-	register_iop32x_gpio();
-	gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup);
-	gpiod_add_lookup_table(&iop3xx_i2c1_gpio_lookup);
-	platform_device_register(&iop3xx_i2c0_device);
-	platform_device_register(&iop3xx_i2c1_device);
-	platform_device_register(&glantank_flash_device);
-	platform_device_register(&glantank_serial_device);
-	platform_device_register(&iop3xx_dma_0_channel);
-	platform_device_register(&iop3xx_dma_1_channel);
-
-	i2c_register_board_info(0, glantank_i2c_devices,
-		ARRAY_SIZE(glantank_i2c_devices));
-
-	pm_power_off = glantank_power_off;
-}
-
-MACHINE_START(GLANTANK, "GLAN Tank")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= IOP32X_NR_IRQS,
-	.map_io		= glantank_map_io,
-	.init_irq	= iop32x_init_irq,
-	.init_time	= glantank_timer_init,
-	.init_machine	= glantank_init_machine,
-	.restart	= iop3xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-iop32x/glantank.h b/arch/arm/mach-iop32x/glantank.h
deleted file mode 100644
index f38e86b82c3d..000000000000
--- a/arch/arm/mach-iop32x/glantank.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * IO-Data GLAN Tank board registers
- */
-
-#ifndef __GLANTANK_H
-#define __GLANTANK_H
-
-#define GLANTANK_UART		0xfe800000	/* UART */
-
-
-#endif
diff --git a/arch/arm/mach-iop32x/gpio-iop32x.h b/arch/arm/mach-iop32x/gpio-iop32x.h
deleted file mode 100644
index 20af87e4c5e8..000000000000
--- a/arch/arm/mach-iop32x/gpio-iop32x.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-static struct resource iop32x_gpio_res[] = {
-	DEFINE_RES_MEM((IOP3XX_PERIPHERAL_PHYS_BASE + 0x07c4), 0x10),
-};
-
-static inline void register_iop32x_gpio(void)
-{
-	platform_device_register_simple("gpio-iop", 0,
-					iop32x_gpio_res,
-					ARRAY_SIZE(iop32x_gpio_res));
-}
diff --git a/arch/arm/mach-iop32x/hardware.h b/arch/arm/mach-iop32x/hardware.h
deleted file mode 100644
index 43ab4fb8f9b0..000000000000
--- a/arch/arm/mach-iop32x/hardware.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __HARDWARE_H
-#define __HARDWARE_H
-
-#include <asm/types.h>
-
-/*
- * Note about PCI IO space mappings
- *
- * To make IO space accesses efficient, we store virtual addresses in
- * the IO resources.
- *
- * The PCI IO space is located at virtual 0xfe000000 from physical
- * 0x90000000. The PCI BARs must be programmed with physical addresses,
- * but when we read them, we convert them to virtual addresses. See
- * arch/arm/plat-iop/pci.c.
- */
-
-#ifndef __ASSEMBLY__
-void iop32x_init_irq(void);
-#endif
-
-
-/*
- * Generic chipset bits
- */
-#include "iop3xx.h"
-
-/*
- * Board specific bits
- */
-#include "glantank.h"
-#include "iq80321.h"
-#include "iq31244.h"
-#include "n2100.h"
-
-
-#endif
diff --git a/arch/arm/mach-iop32x/i2c.c b/arch/arm/mach-iop32x/i2c.c
deleted file mode 100644
index e422286af469..000000000000
--- a/arch/arm/mach-iop32x/i2c.c
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/plat-iop/i2c.c
- *
- * Author: Nicolas Pitre <nico@cam.org>
- * Copyright (C) 2001 MontaVista Software, Inc.
- * Copyright (C) 2004 Intel Corporation.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-#include <linux/gpio/machine.h>
-#include <asm/page.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach/arch.h>
-
-#include "hardware.h"
-#include "iop3xx.h"
-#include "irqs.h"
-
-/*
- * Each of the I2C busses have corresponding GPIO lines, and the driver
- * need to access these directly to drive the bus low at times.
- */
-
-struct gpiod_lookup_table iop3xx_i2c0_gpio_lookup = {
-	.dev_id = "IOP3xx-I2C.0",
-	.table = {
-		GPIO_LOOKUP("gpio-iop", 7, "scl", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-iop", 6, "sda", GPIO_ACTIVE_HIGH),
-		{ }
-	},
-};
-
-struct gpiod_lookup_table iop3xx_i2c1_gpio_lookup = {
-	.dev_id = "IOP3xx-I2C.1",
-	.table = {
-		GPIO_LOOKUP("gpio-iop", 5, "scl", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-iop", 4, "sda", GPIO_ACTIVE_HIGH),
-		{ }
-	},
-};
-
-static struct resource iop3xx_i2c0_resources[] = {
-	[0] = {
-		.start	= 0xfffff680,
-		.end	= 0xfffff697,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_IOP32X_I2C_0,
-		.end	= IRQ_IOP32X_I2C_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device iop3xx_i2c0_device = {
-	.name		= "IOP3xx-I2C",
-	.id		= 0,
-	.num_resources	= 2,
-	.resource	= iop3xx_i2c0_resources,
-};
-
-
-static struct resource iop3xx_i2c1_resources[] = {
-	[0] = {
-		.start	= 0xfffff6a0,
-		.end	= 0xfffff6b7,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_IOP32X_I2C_1,
-		.end	= IRQ_IOP32X_I2C_1,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device iop3xx_i2c1_device = {
-	.name		= "IOP3xx-I2C",
-	.id		= 1,
-	.num_resources	= 2,
-	.resource	= iop3xx_i2c1_resources,
-};
diff --git a/arch/arm/mach-iop32x/iop3xx.h b/arch/arm/mach-iop32x/iop3xx.h
deleted file mode 100644
index a6ec7ebadb35..000000000000
--- a/arch/arm/mach-iop32x/iop3xx.h
+++ /dev/null
@@ -1,326 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Intel IOP32X and IOP33X register definitions
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright (C) 2004 Intel Corp.
- */
-
-#ifndef __IOP3XX_H
-#define __IOP3XX_H
-
-/*
- * Peripherals that are shared between the iop32x and iop33x but
- * located at different addresses.
- */
-#define IOP3XX_TIMER_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07e0 + (reg))
-
-#include "iop3xx.h"
-
-/* ATU Parameters
- * set up a 1:1 bus to physical ram relationship
- * w/ physical ram on top of pci in the memory map
- */
-#define IOP32X_MAX_RAM_SIZE            0x40000000UL
-#define IOP3XX_MAX_RAM_SIZE            IOP32X_MAX_RAM_SIZE
-#define IOP3XX_PCI_LOWER_MEM_BA        0x80000000
-
-/*
- * IOP3XX GPIO handling
- */
-#define IOP3XX_GPIO_LINE(x)	(x)
-
-#ifndef __ASSEMBLY__
-extern int init_atu;
-extern int iop3xx_get_init_atu(void);
-#endif
-
-
-/*
- * IOP3XX processor registers
- */
-#define IOP3XX_PERIPHERAL_PHYS_BASE	0xffffe000
-#define IOP3XX_PERIPHERAL_VIRT_BASE	0xfedfe000
-#define IOP3XX_PERIPHERAL_SIZE		0x00002000
-#define IOP3XX_PERIPHERAL_UPPER_PA (IOP3XX_PERIPHERAL_PHYS_BASE +\
-					IOP3XX_PERIPHERAL_SIZE - 1)
-#define IOP3XX_PERIPHERAL_UPPER_VA (IOP3XX_PERIPHERAL_VIRT_BASE +\
-					IOP3XX_PERIPHERAL_SIZE - 1)
-#define IOP3XX_PMMR_PHYS_TO_VIRT(addr) (u32) ((u32) (addr) -\
-					(IOP3XX_PERIPHERAL_PHYS_BASE\
-					- IOP3XX_PERIPHERAL_VIRT_BASE))
-#define IOP3XX_REG_ADDR(reg)		(IOP3XX_PERIPHERAL_VIRT_BASE + (reg))
-
-/* Address Translation Unit  */
-#define IOP3XX_ATUVID		(volatile u16 *)IOP3XX_REG_ADDR(0x0100)
-#define IOP3XX_ATUDID		(volatile u16 *)IOP3XX_REG_ADDR(0x0102)
-#define IOP3XX_ATUCMD		(volatile u16 *)IOP3XX_REG_ADDR(0x0104)
-#define IOP3XX_ATUSR		(volatile u16 *)IOP3XX_REG_ADDR(0x0106)
-#define IOP3XX_ATURID		(volatile u8  *)IOP3XX_REG_ADDR(0x0108)
-#define IOP3XX_ATUCCR		(volatile u32 *)IOP3XX_REG_ADDR(0x0109)
-#define IOP3XX_ATUCLSR		(volatile u8  *)IOP3XX_REG_ADDR(0x010c)
-#define IOP3XX_ATULT		(volatile u8  *)IOP3XX_REG_ADDR(0x010d)
-#define IOP3XX_ATUHTR		(volatile u8  *)IOP3XX_REG_ADDR(0x010e)
-#define IOP3XX_ATUBIST		(volatile u8  *)IOP3XX_REG_ADDR(0x010f)
-#define IOP3XX_IABAR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0110)
-#define IOP3XX_IAUBAR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0114)
-#define IOP3XX_IABAR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0118)
-#define IOP3XX_IAUBAR1		(volatile u32 *)IOP3XX_REG_ADDR(0x011c)
-#define IOP3XX_IABAR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0120)
-#define IOP3XX_IAUBAR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0124)
-#define IOP3XX_ASVIR		(volatile u16 *)IOP3XX_REG_ADDR(0x012c)
-#define IOP3XX_ASIR		(volatile u16 *)IOP3XX_REG_ADDR(0x012e)
-#define IOP3XX_ERBAR		(volatile u32 *)IOP3XX_REG_ADDR(0x0130)
-#define IOP3XX_ATUILR		(volatile u8  *)IOP3XX_REG_ADDR(0x013c)
-#define IOP3XX_ATUIPR		(volatile u8  *)IOP3XX_REG_ADDR(0x013d)
-#define IOP3XX_ATUMGNT		(volatile u8  *)IOP3XX_REG_ADDR(0x013e)
-#define IOP3XX_ATUMLAT		(volatile u8  *)IOP3XX_REG_ADDR(0x013f)
-#define IOP3XX_IALR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0140)
-#define IOP3XX_IATVR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0144)
-#define IOP3XX_ERLR		(volatile u32 *)IOP3XX_REG_ADDR(0x0148)
-#define IOP3XX_ERTVR		(volatile u32 *)IOP3XX_REG_ADDR(0x014c)
-#define IOP3XX_IALR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0150)
-#define IOP3XX_IALR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0154)
-#define IOP3XX_IATVR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0158)
-#define IOP3XX_OIOWTVR		(volatile u32 *)IOP3XX_REG_ADDR(0x015c)
-#define IOP3XX_OMWTVR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0160)
-#define IOP3XX_OUMWTVR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0164)
-#define IOP3XX_OMWTVR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0168)
-#define IOP3XX_OUMWTVR1		(volatile u32 *)IOP3XX_REG_ADDR(0x016c)
-#define IOP3XX_OUDWTVR		(volatile u32 *)IOP3XX_REG_ADDR(0x0178)
-#define IOP3XX_ATUCR		(volatile u32 *)IOP3XX_REG_ADDR(0x0180)
-#define IOP3XX_PCSR		(volatile u32 *)IOP3XX_REG_ADDR(0x0184)
-#define IOP3XX_ATUISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0188)
-#define IOP3XX_ATUIMR		(volatile u32 *)IOP3XX_REG_ADDR(0x018c)
-#define IOP3XX_IABAR3		(volatile u32 *)IOP3XX_REG_ADDR(0x0190)
-#define IOP3XX_IAUBAR3		(volatile u32 *)IOP3XX_REG_ADDR(0x0194)
-#define IOP3XX_IALR3		(volatile u32 *)IOP3XX_REG_ADDR(0x0198)
-#define IOP3XX_IATVR3		(volatile u32 *)IOP3XX_REG_ADDR(0x019c)
-#define IOP3XX_OCCAR		(volatile u32 *)IOP3XX_REG_ADDR(0x01a4)
-#define IOP3XX_OCCDR		(volatile u32 *)IOP3XX_REG_ADDR(0x01ac)
-#define IOP3XX_PDSCR		(volatile u32 *)IOP3XX_REG_ADDR(0x01bc)
-#define IOP3XX_PMCAPID		(volatile u8  *)IOP3XX_REG_ADDR(0x01c0)
-#define IOP3XX_PMNEXT		(volatile u8  *)IOP3XX_REG_ADDR(0x01c1)
-#define IOP3XX_APMCR		(volatile u16 *)IOP3XX_REG_ADDR(0x01c2)
-#define IOP3XX_APMCSR		(volatile u16 *)IOP3XX_REG_ADDR(0x01c4)
-#define IOP3XX_PCIXCAPID	(volatile u8  *)IOP3XX_REG_ADDR(0x01e0)
-#define IOP3XX_PCIXNEXT		(volatile u8  *)IOP3XX_REG_ADDR(0x01e1)
-#define IOP3XX_PCIXCMD		(volatile u16 *)IOP3XX_REG_ADDR(0x01e2)
-#define IOP3XX_PCIXSR		(volatile u32 *)IOP3XX_REG_ADDR(0x01e4)
-#define IOP3XX_PCIIRSR		(volatile u32 *)IOP3XX_REG_ADDR(0x01ec)
-#define IOP3XX_PCSR_OUT_Q_BUSY (1 << 15)
-#define IOP3XX_PCSR_IN_Q_BUSY	(1 << 14)
-#define IOP3XX_ATUCR_OUT_EN	(1 << 1)
-
-#define IOP3XX_INIT_ATU_DEFAULT 0
-#define IOP3XX_INIT_ATU_DISABLE -1
-#define IOP3XX_INIT_ATU_ENABLE	 1
-
-/* Messaging Unit  */
-#define IOP3XX_IMR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0310)
-#define IOP3XX_IMR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0314)
-#define IOP3XX_OMR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0318)
-#define IOP3XX_OMR1		(volatile u32 *)IOP3XX_REG_ADDR(0x031c)
-#define IOP3XX_IDR		(volatile u32 *)IOP3XX_REG_ADDR(0x0320)
-#define IOP3XX_IISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0324)
-#define IOP3XX_IIMR		(volatile u32 *)IOP3XX_REG_ADDR(0x0328)
-#define IOP3XX_ODR		(volatile u32 *)IOP3XX_REG_ADDR(0x032c)
-#define IOP3XX_OISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0330)
-#define IOP3XX_OIMR		(volatile u32 *)IOP3XX_REG_ADDR(0x0334)
-#define IOP3XX_MUCR		(volatile u32 *)IOP3XX_REG_ADDR(0x0350)
-#define IOP3XX_QBAR		(volatile u32 *)IOP3XX_REG_ADDR(0x0354)
-#define IOP3XX_IFHPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0360)
-#define IOP3XX_IFTPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0364)
-#define IOP3XX_IPHPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0368)
-#define IOP3XX_IPTPR		(volatile u32 *)IOP3XX_REG_ADDR(0x036c)
-#define IOP3XX_OFHPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0370)
-#define IOP3XX_OFTPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0374)
-#define IOP3XX_OPHPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0378)
-#define IOP3XX_OPTPR		(volatile u32 *)IOP3XX_REG_ADDR(0x037c)
-#define IOP3XX_IAR		(volatile u32 *)IOP3XX_REG_ADDR(0x0380)
-
-/* DMA Controller  */
-#define IOP3XX_DMA_PHYS_BASE(chan) (IOP3XX_PERIPHERAL_PHYS_BASE + \
-					(0x400 + (chan << 6)))
-#define IOP3XX_DMA_UPPER_PA(chan)  (IOP3XX_DMA_PHYS_BASE(chan) + 0x27)
-
-/* Peripheral bus interface  */
-#define IOP3XX_PBCR		(volatile u32 *)IOP3XX_REG_ADDR(0x0680)
-#define IOP3XX_PBISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0684)
-#define IOP3XX_PBBAR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0688)
-#define IOP3XX_PBLR0		(volatile u32 *)IOP3XX_REG_ADDR(0x068c)
-#define IOP3XX_PBBAR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0690)
-#define IOP3XX_PBLR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0694)
-#define IOP3XX_PBBAR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0698)
-#define IOP3XX_PBLR2		(volatile u32 *)IOP3XX_REG_ADDR(0x069c)
-#define IOP3XX_PBBAR3		(volatile u32 *)IOP3XX_REG_ADDR(0x06a0)
-#define IOP3XX_PBLR3		(volatile u32 *)IOP3XX_REG_ADDR(0x06a4)
-#define IOP3XX_PBBAR4		(volatile u32 *)IOP3XX_REG_ADDR(0x06a8)
-#define IOP3XX_PBLR4		(volatile u32 *)IOP3XX_REG_ADDR(0x06ac)
-#define IOP3XX_PBBAR5		(volatile u32 *)IOP3XX_REG_ADDR(0x06b0)
-#define IOP3XX_PBLR5		(volatile u32 *)IOP3XX_REG_ADDR(0x06b4)
-#define IOP3XX_PMBR0		(volatile u32 *)IOP3XX_REG_ADDR(0x06c0)
-#define IOP3XX_PMBR1		(volatile u32 *)IOP3XX_REG_ADDR(0x06e0)
-#define IOP3XX_PMBR2		(volatile u32 *)IOP3XX_REG_ADDR(0x06e4)
-
-/* Peripheral performance monitoring unit  */
-#define IOP3XX_GTMR		(volatile u32 *)IOP3XX_REG_ADDR(0x0700)
-#define IOP3XX_ESR		(volatile u32 *)IOP3XX_REG_ADDR(0x0704)
-#define IOP3XX_EMISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0708)
-#define IOP3XX_GTSR		(volatile u32 *)IOP3XX_REG_ADDR(0x0710)
-/* PERCR0 DOESN'T EXIST - index from 1! */
-#define IOP3XX_PERCR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0710)
-
-/* Timers  */
-#define IOP3XX_TU_TMR0		(volatile u32 *)IOP3XX_TIMER_REG(0x0000)
-#define IOP3XX_TU_TMR1		(volatile u32 *)IOP3XX_TIMER_REG(0x0004)
-#define IOP3XX_TU_TCR0		(volatile u32 *)IOP3XX_TIMER_REG(0x0008)
-#define IOP3XX_TU_TCR1		(volatile u32 *)IOP3XX_TIMER_REG(0x000c)
-#define IOP3XX_TU_TRR0		(volatile u32 *)IOP3XX_TIMER_REG(0x0010)
-#define IOP3XX_TU_TRR1		(volatile u32 *)IOP3XX_TIMER_REG(0x0014)
-#define IOP3XX_TU_TISR		(volatile u32 *)IOP3XX_TIMER_REG(0x0018)
-#define IOP3XX_TU_WDTCR		(volatile u32 *)IOP3XX_TIMER_REG(0x001c)
-#define IOP_TMR_EN	    0x02
-#define IOP_TMR_RELOAD	    0x04
-#define IOP_TMR_PRIVILEGED 0x08
-#define IOP_TMR_RATIO_1_1  0x00
-
-/* Watchdog timer definitions */
-#define IOP_WDTCR_EN_ARM        0x1e1e1e1e
-#define IOP_WDTCR_EN            0xe1e1e1e1
-/* iop3xx does not support stopping the watchdog, so we just re-arm */
-#define IOP_WDTCR_DIS_ARM	(IOP_WDTCR_EN_ARM)
-#define IOP_WDTCR_DIS		(IOP_WDTCR_EN)
-
-/* Application accelerator unit  */
-#define IOP3XX_AAU_PHYS_BASE (IOP3XX_PERIPHERAL_PHYS_BASE + 0x800)
-#define IOP3XX_AAU_UPPER_PA (IOP3XX_AAU_PHYS_BASE + 0xa7)
-
-/* I2C bus interface unit  */
-#define IOP3XX_ICR0		(volatile u32 *)IOP3XX_REG_ADDR(0x1680)
-#define IOP3XX_ISR0		(volatile u32 *)IOP3XX_REG_ADDR(0x1684)
-#define IOP3XX_ISAR0		(volatile u32 *)IOP3XX_REG_ADDR(0x1688)
-#define IOP3XX_IDBR0		(volatile u32 *)IOP3XX_REG_ADDR(0x168c)
-#define IOP3XX_IBMR0		(volatile u32 *)IOP3XX_REG_ADDR(0x1694)
-#define IOP3XX_ICR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16a0)
-#define IOP3XX_ISR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16a4)
-#define IOP3XX_ISAR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16a8)
-#define IOP3XX_IDBR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16ac)
-#define IOP3XX_IBMR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16b4)
-
-
-/*
- * IOP3XX I/O and Mem space regions for PCI autoconfiguration
- */
-#define IOP3XX_PCI_LOWER_MEM_PA	0x80000000
-#define IOP3XX_PCI_MEM_WINDOW_SIZE	0x08000000
-
-#define IOP3XX_PCI_LOWER_IO_PA		0x90000000
-#define IOP3XX_PCI_LOWER_IO_BA		0x00000000
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-#include <linux/reboot.h>
-
-void iop3xx_map_io(void);
-void iop_enable_cp6(void);
-void iop_init_cp6_handler(void);
-void iop_init_time(unsigned long tickrate);
-void iop3xx_restart(enum reboot_mode, const char *);
-
-static inline u32 read_tmr0(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c0, c1, 0" : "=r" (val));
-	return val;
-}
-
-static inline void write_tmr0(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c0, c1, 0" : : "r" (val));
-}
-
-static inline void write_tmr1(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c1, c1, 0" : : "r" (val));
-}
-
-static inline u32 read_tcr0(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c2, c1, 0" : "=r" (val));
-	return val;
-}
-
-static inline void write_tcr0(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c2, c1, 0" : : "r" (val));
-}
-
-static inline u32 read_tcr1(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c3, c1, 0" : "=r" (val));
-	return val;
-}
-
-static inline void write_tcr1(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c3, c1, 0" : : "r" (val));
-}
-
-static inline void write_trr0(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (val));
-}
-
-static inline void write_trr1(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c5, c1, 0" : : "r" (val));
-}
-
-static inline void write_tisr(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (val));
-}
-
-static inline u32 read_wdtcr(void)
-{
-	u32 val;
-	asm volatile("mrc p6, 0, %0, c7, c1, 0":"=r" (val));
-	return val;
-}
-static inline void write_wdtcr(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c7, c1, 0"::"r" (val));
-}
-
-extern unsigned long get_iop_tick_rate(void);
-
-/* only iop13xx has these registers, we define these to present a
- * common register interface for the iop_wdt driver.
- */
-#define IOP_RCSR_WDT	(0)
-static inline u32 read_rcsr(void)
-{
-	return 0;
-}
-static inline void write_wdtsr(u32 val)
-{
-	do { } while (0);
-}
-
-extern struct platform_device iop3xx_dma_0_channel;
-extern struct platform_device iop3xx_dma_1_channel;
-extern struct platform_device iop3xx_aau_channel;
-extern struct platform_device iop3xx_i2c0_device;
-extern struct platform_device iop3xx_i2c1_device;
-extern struct gpiod_lookup_table iop3xx_i2c0_gpio_lookup;
-extern struct gpiod_lookup_table iop3xx_i2c1_gpio_lookup;
-
-#endif
-
-
-#endif
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
deleted file mode 100644
index 8b4c29d17265..000000000000
--- a/arch/arm/mach-iop32x/iq31244.c
+++ /dev/null
@@ -1,333 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-iop32x/iq31244.c
- *
- * Board support code for the Intel EP80219 and IQ31244 platforms.
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright 2003 (c) MontaVista, Software, Inc.
- * Copyright (C) 2004 Intel Corp.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio/machine.h>
-#include <asm/cputype.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-
-#include "hardware.h"
-#include "irqs.h"
-#include "gpio-iop32x.h"
-
-/*
- * Until March of 2007 iq31244 platforms and ep80219 platforms shared the
- * same machine id, and the processor type was used to select board type.
- * However this assumption breaks for an iq80219 board which is an iop219
- * processor on an iq31244 board.  The force_ep80219 flag has been added
- * for old boot loaders using the iq31244 machine id for an ep80219 platform.
- */
-static int force_ep80219;
-
-static int is_80219(void)
-{
-	return !!((read_cpuid_id() & 0xffffffe0) == 0x69052e20);
-}
-
-static int is_ep80219(void)
-{
-	if (machine_is_ep80219() || force_ep80219)
-		return 1;
-	else
-		return 0;
-}
-
-
-/*
- * EP80219/IQ31244 timer tick configuration.
- */
-static void __init iq31244_timer_init(void)
-{
-	if (is_ep80219()) {
-		/* 33.333 MHz crystal.  */
-		iop_init_time(200000000);
-	} else {
-		/* 33.000 MHz crystal.  */
-		iop_init_time(198000000);
-	}
-}
-
-
-/*
- * IQ31244 I/O.
- */
-static struct map_desc iq31244_io_desc[] __initdata = {
-	{	/* on-board devices */
-		.virtual	= IQ31244_UART,
-		.pfn		= __phys_to_pfn(IQ31244_UART),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE,
-	},
-};
-
-void __init iq31244_map_io(void)
-{
-	iop3xx_map_io();
-	iotable_init(iq31244_io_desc, ARRAY_SIZE(iq31244_io_desc));
-}
-
-
-/*
- * EP80219/IQ31244 PCI.
- */
-static int __init
-ep80219_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	if (slot == 0) {
-		/* CFlash */
-		irq = IRQ_IOP32X_XINT1;
-	} else if (slot == 1) {
-		/* 82551 Pro 100 */
-		irq = IRQ_IOP32X_XINT0;
-	} else if (slot == 2) {
-		/* PCI-X Slot */
-		irq = IRQ_IOP32X_XINT3;
-	} else if (slot == 3) {
-		/* SATA */
-		irq = IRQ_IOP32X_XINT2;
-	} else {
-		printk(KERN_ERR "ep80219_pci_map_irq() called for unknown "
-			"device PCI:%d:%d:%d\n", dev->bus->number,
-			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-		irq = -1;
-	}
-
-	return irq;
-}
-
-static struct hw_pci ep80219_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &iop3xx_ops,
-	.setup		= iop3xx_pci_setup,
-	.preinit	= iop3xx_pci_preinit,
-	.map_irq	= ep80219_pci_map_irq,
-};
-
-static int __init
-iq31244_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	if (slot == 0) {
-		/* CFlash */
-		irq = IRQ_IOP32X_XINT1;
-	} else if (slot == 1) {
-		/* SATA */
-		irq = IRQ_IOP32X_XINT2;
-	} else if (slot == 2) {
-		/* PCI-X Slot */
-		irq = IRQ_IOP32X_XINT3;
-	} else if (slot == 3) {
-		/* 82546 GigE */
-		irq = IRQ_IOP32X_XINT0;
-	} else {
-		printk(KERN_ERR "iq31244_pci_map_irq called for unknown "
-			"device PCI:%d:%d:%d\n", dev->bus->number,
-			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-		irq = -1;
-	}
-
-	return irq;
-}
-
-static struct hw_pci iq31244_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &iop3xx_ops,
-	.setup		= iop3xx_pci_setup,
-	.preinit	= iop3xx_pci_preinit,
-	.map_irq	= iq31244_pci_map_irq,
-};
-
-static int __init iq31244_pci_init(void)
-{
-	if (is_ep80219())
-		pci_common_init(&ep80219_pci);
-	else if (machine_is_iq31244()) {
-		if (is_80219()) {
-			printk("note: iq31244 board type has been selected\n");
-			printk("note: to select ep80219 operation:\n");
-			printk("\t1/ specify \"force_ep80219\" on the kernel"
-				" command line\n");
-			printk("\t2/ update boot loader to pass"
-				" the ep80219 id: %d\n", MACH_TYPE_EP80219);
-		}
-		pci_common_init(&iq31244_pci);
-	}
-
-	return 0;
-}
-
-subsys_initcall(iq31244_pci_init);
-
-
-/*
- * IQ31244 machine initialisation.
- */
-static struct physmap_flash_data iq31244_flash_data = {
-	.width		= 2,
-};
-
-static struct resource iq31244_flash_resource = {
-	.start		= 0xf0000000,
-	.end		= 0xf07fffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device iq31244_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &iq31244_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &iq31244_flash_resource,
-};
-
-static struct plat_serial8250_port iq31244_serial_port[] = {
-	{
-		.mapbase	= IQ31244_UART,
-		.membase	= (char *)IQ31244_UART,
-		.irq		= IRQ_IOP32X_XINT1,
-		.flags		= UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= 1843200,
-	},
-	{ },
-};
-
-static struct resource iq31244_uart_resource = {
-	.start		= IQ31244_UART,
-	.end		= IQ31244_UART + 7,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device iq31244_serial_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev		= {
-		.platform_data		= iq31244_serial_port,
-	},
-	.num_resources	= 1,
-	.resource	= &iq31244_uart_resource,
-};
-
-/*
- * This function will send a SHUTDOWN_COMPLETE message to the PIC
- * controller over I2C.  We are not using the i2c subsystem since
- * we are going to power off and it may be removed
- */
-void ep80219_power_off(void)
-{
-	/*
-	 * Send the Address byte w/ the start condition
-	 */
-	*IOP3XX_IDBR1 = 0x60;
-	*IOP3XX_ICR1 = 0xE9;
-	mdelay(1);
-
-	/*
-	 * Send the START_MSG byte w/ no start or stop condition
-	 */
-	*IOP3XX_IDBR1 = 0x0F;
-	*IOP3XX_ICR1 = 0xE8;
-	mdelay(1);
-
-	/*
-	 * Send the SHUTDOWN_COMPLETE Message ID byte w/ no start or
-	 * stop condition
-	 */
-	*IOP3XX_IDBR1 = 0x03;
-	*IOP3XX_ICR1 = 0xE8;
-	mdelay(1);
-
-	/*
-	 * Send an ignored byte w/ stop condition
-	 */
-	*IOP3XX_IDBR1 = 0x00;
-	*IOP3XX_ICR1 = 0xEA;
-
-	while (1)
-		;
-}
-
-static void __init iq31244_init_machine(void)
-{
-	register_iop32x_gpio();
-	gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup);
-	gpiod_add_lookup_table(&iop3xx_i2c1_gpio_lookup);
-	platform_device_register(&iop3xx_i2c0_device);
-	platform_device_register(&iop3xx_i2c1_device);
-	platform_device_register(&iq31244_flash_device);
-	platform_device_register(&iq31244_serial_device);
-	platform_device_register(&iop3xx_dma_0_channel);
-	platform_device_register(&iop3xx_dma_1_channel);
-
-	if (is_ep80219())
-		pm_power_off = ep80219_power_off;
-
-	if (!is_80219())
-		platform_device_register(&iop3xx_aau_channel);
-}
-
-static int __init force_ep80219_setup(char *str)
-{
-	force_ep80219 = 1;
-	return 1;
-}
-
-__setup("force_ep80219", force_ep80219_setup);
-
-MACHINE_START(IQ31244, "Intel IQ31244")
-	/* Maintainer: Intel Corp. */
-	.atag_offset	= 0x100,
-	.map_io		= iq31244_map_io,
-	.init_irq	= iop32x_init_irq,
-	.init_time	= iq31244_timer_init,
-	.init_machine	= iq31244_init_machine,
-	.restart	= iop3xx_restart,
-MACHINE_END
-
-/* There should have been an ep80219 machine identifier from the beginning.
- * Boot roms older than March 2007 do not know the ep80219 machine id.  Pass
- * "force_ep80219" on the kernel command line, otherwise iq31244 operation
- * will be selected.
- */
-MACHINE_START(EP80219, "Intel EP80219")
-	/* Maintainer: Intel Corp. */
-	.atag_offset	= 0x100,
-	.nr_irqs	= IOP32X_NR_IRQS,
-	.map_io		= iq31244_map_io,
-	.init_irq	= iop32x_init_irq,
-	.init_time	= iq31244_timer_init,
-	.init_machine	= iq31244_init_machine,
-	.restart	= iop3xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-iop32x/iq31244.h b/arch/arm/mach-iop32x/iq31244.h
deleted file mode 100644
index a7ac691e48d3..000000000000
--- a/arch/arm/mach-iop32x/iq31244.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Intel IQ31244 evaluation board registers
- */
-
-#ifndef __IQ31244_H
-#define __IQ31244_H
-
-#define IQ31244_UART		0xfe800000	/* UART #1 */
-#define IQ31244_7SEG_1		0xfe840000	/* 7-Segment MSB */
-#define IQ31244_7SEG_0		0xfe850000	/* 7-Segment LSB (WO) */
-#define IQ31244_ROTARY_SW	0xfe8d0000	/* Rotary Switch */
-#define IQ31244_BATT_STAT	0xfe8f0000	/* Battery Status */
-
-
-#endif
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
deleted file mode 100644
index d9780c4660cb..000000000000
--- a/arch/arm/mach-iop32x/iq80321.c
+++ /dev/null
@@ -1,192 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-iop32x/iq80321.c
- *
- * Board support code for the Intel IQ80321 platform.
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright (C) 2004 Intel Corp.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio/machine.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-
-#include "hardware.h"
-#include "irqs.h"
-#include "gpio-iop32x.h"
-
-/*
- * IQ80321 timer tick configuration.
- */
-static void __init iq80321_timer_init(void)
-{
-	/* 33.333 MHz crystal.  */
-	iop_init_time(200000000);
-}
-
-
-/*
- * IQ80321 I/O.
- */
-static struct map_desc iq80321_io_desc[] __initdata = {
- 	{	/* on-board devices */
-		.virtual	= IQ80321_UART,
-		.pfn		= __phys_to_pfn(IQ80321_UART),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE,
-	},
-};
-
-void __init iq80321_map_io(void)
-{
-	iop3xx_map_io();
-	iotable_init(iq80321_io_desc, ARRAY_SIZE(iq80321_io_desc));
-}
-
-
-/*
- * IQ80321 PCI.
- */
-static int __init
-iq80321_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	if ((slot == 2 || slot == 6) && pin == 1) {
-		/* PCI-X Slot INTA */
-		irq = IRQ_IOP32X_XINT2;
-	} else if ((slot == 2 || slot == 6) && pin == 2) {
-		/* PCI-X Slot INTA */
-		irq = IRQ_IOP32X_XINT3;
-	} else if ((slot == 2 || slot == 6) && pin == 3) {
-		/* PCI-X Slot INTA */
-		irq = IRQ_IOP32X_XINT0;
-	} else if ((slot == 2 || slot == 6) && pin == 4) {
-		/* PCI-X Slot INTA */
-		irq = IRQ_IOP32X_XINT1;
-	} else if (slot == 4 || slot == 8) {
-		/* Gig-E */
-		irq = IRQ_IOP32X_XINT0;
-	} else {
-		printk(KERN_ERR "iq80321_pci_map_irq() called for unknown "
-			"device PCI:%d:%d:%d\n", dev->bus->number,
-			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-		irq = -1;
-	}
-
-	return irq;
-}
-
-static struct hw_pci iq80321_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &iop3xx_ops,
-	.setup		= iop3xx_pci_setup,
-	.preinit	= iop3xx_pci_preinit_cond,
-	.map_irq	= iq80321_pci_map_irq,
-};
-
-static int __init iq80321_pci_init(void)
-{
-	if ((iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) &&
-		machine_is_iq80321())
-		pci_common_init(&iq80321_pci);
-
-	return 0;
-}
-
-subsys_initcall(iq80321_pci_init);
-
-
-/*
- * IQ80321 machine initialisation.
- */
-static struct physmap_flash_data iq80321_flash_data = {
-	.width		= 1,
-};
-
-static struct resource iq80321_flash_resource = {
-	.start		= 0xf0000000,
-	.end		= 0xf07fffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device iq80321_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &iq80321_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &iq80321_flash_resource,
-};
-
-static struct plat_serial8250_port iq80321_serial_port[] = {
-	{
-		.mapbase	= IQ80321_UART,
-		.membase	= (char *)IQ80321_UART,
-		.irq		= IRQ_IOP32X_XINT1,
-		.flags		= UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= 1843200,
-	},
-	{ },
-};
-
-static struct resource iq80321_uart_resource = {
-	.start		= IQ80321_UART,
-	.end		= IQ80321_UART + 7,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device iq80321_serial_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev		= {
-		.platform_data		= iq80321_serial_port,
-	},
-	.num_resources	= 1,
-	.resource	= &iq80321_uart_resource,
-};
-
-static void __init iq80321_init_machine(void)
-{
-	register_iop32x_gpio();
-	gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup);
-	gpiod_add_lookup_table(&iop3xx_i2c1_gpio_lookup);
-	platform_device_register(&iop3xx_i2c0_device);
-	platform_device_register(&iop3xx_i2c1_device);
-	platform_device_register(&iq80321_flash_device);
-	platform_device_register(&iq80321_serial_device);
-	platform_device_register(&iop3xx_dma_0_channel);
-	platform_device_register(&iop3xx_dma_1_channel);
-	platform_device_register(&iop3xx_aau_channel);
-}
-
-MACHINE_START(IQ80321, "Intel IQ80321")
-	/* Maintainer: Intel Corp. */
-	.atag_offset	= 0x100,
-	.nr_irqs	= IOP32X_NR_IRQS,
-	.map_io		= iq80321_map_io,
-	.init_irq	= iop32x_init_irq,
-	.init_time	= iq80321_timer_init,
-	.init_machine	= iq80321_init_machine,
-	.restart	= iop3xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-iop32x/iq80321.h b/arch/arm/mach-iop32x/iq80321.h
deleted file mode 100644
index 3a5d10626ea6..000000000000
--- a/arch/arm/mach-iop32x/iq80321.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Intel IQ80321 evaluation board registers
- */
-
-#ifndef __IQ80321_H
-#define __IQ80321_H
-
-#define IQ80321_UART		0xfe800000	/* UART #1 */
-#define IQ80321_7SEG_1		0xfe840000	/* 7-Segment MSB */
-#define IQ80321_7SEG_0		0xfe850000	/* 7-Segment LSB (WO) */
-#define IQ80321_ROTARY_SW	0xfe8d0000	/* Rotary Switch */
-#define IQ80321_BATT_STAT	0xfe8f0000	/* Battery Status */
-
-
-#endif
diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c
deleted file mode 100644
index 6dca7e97d81f..000000000000
--- a/arch/arm/mach-iop32x/irq.c
+++ /dev/null
@@ -1,95 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-iop32x/irq.c
- *
- * Generic IOP32X IRQ handling functionality
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <asm/mach/irq.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include "hardware.h"
-
-static u32 iop32x_mask;
-
-static void intctl_write(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c0, c0, 0" : : "r" (val));
-}
-
-static void intstr_write(u32 val)
-{
-	asm volatile("mcr p6, 0, %0, c4, c0, 0" : : "r" (val));
-}
-
-static u32 iintsrc_read(void)
-{
-	int irq;
-
-	asm volatile("mrc p6, 0, %0, c8, c0, 0" : "=r" (irq));
-
-	return irq;
-}
-
-static void
-iop32x_irq_mask(struct irq_data *d)
-{
-	iop32x_mask &= ~(1 << (d->irq - 1));
-	intctl_write(iop32x_mask);
-}
-
-static void
-iop32x_irq_unmask(struct irq_data *d)
-{
-	iop32x_mask |= 1 << (d->irq - 1);
-	intctl_write(iop32x_mask);
-}
-
-struct irq_chip ext_chip = {
-	.name		= "IOP32x",
-	.irq_ack	= iop32x_irq_mask,
-	.irq_mask	= iop32x_irq_mask,
-	.irq_unmask	= iop32x_irq_unmask,
-};
-
-static void iop_handle_irq(struct pt_regs *regs)
-{
-	u32 mask;
-
-	iop_enable_cp6();
-
-	do {
-		mask = iintsrc_read();
-		if (mask)
-			generic_handle_irq(fls(mask));
-	} while (mask);
-}
-
-void __init iop32x_init_irq(void)
-{
-	int i;
-
-	iop_init_cp6_handler();
-	set_handle_irq(iop_handle_irq);
-
-	intctl_write(0);
-	intstr_write(0);
-	if (machine_is_glantank() ||
-	    machine_is_iq80321() ||
-	    machine_is_iq31244() ||
-	    machine_is_n2100() ||
-	    machine_is_em7210())
-		*IOP3XX_PCIIRSR = 0x0f;
-
-	for (i = 1; i < NR_IRQS; i++) {
-		irq_set_chip_and_handler(i, &ext_chip, handle_level_irq);
-		irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE);
-	}
-}
diff --git a/arch/arm/mach-iop32x/irqs.h b/arch/arm/mach-iop32x/irqs.h
deleted file mode 100644
index e9fc88e09189..000000000000
--- a/arch/arm/mach-iop32x/irqs.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Author:	Rory Bolt <rorybolt@pacbell.net>
- * Copyright:	(C) 2002 Rory Bolt
- */
-
-#ifndef __IOP32X_IRQS_H
-#define __IOP32X_IRQS_H
-
-/* Interrupts in Linux start at 1, hardware starts at 0 */
-
-#define IOP_IRQ(x) ((x) + 1)
-
-/*
- * IOP80321 chipset interrupts
- */
-#define IRQ_IOP32X_DMA0_EOT	IOP_IRQ(0)
-#define IRQ_IOP32X_DMA0_EOC	IOP_IRQ(1)
-#define IRQ_IOP32X_DMA1_EOT	IOP_IRQ(2)
-#define IRQ_IOP32X_DMA1_EOC	IOP_IRQ(3)
-#define IRQ_IOP32X_AA_EOT	IOP_IRQ(6)
-#define IRQ_IOP32X_AA_EOC	IOP_IRQ(7)
-#define IRQ_IOP32X_CORE_PMON	IOP_IRQ(8)
-#define IRQ_IOP32X_TIMER0	IOP_IRQ(9)
-#define IRQ_IOP32X_TIMER1	IOP_IRQ(10)
-#define IRQ_IOP32X_I2C_0	IOP_IRQ(11)
-#define IRQ_IOP32X_I2C_1	IOP_IRQ(12)
-#define IRQ_IOP32X_MESSAGING	IOP_IRQ(13)
-#define IRQ_IOP32X_ATU_BIST	IOP_IRQ(14)
-#define IRQ_IOP32X_PERFMON	IOP_IRQ(15)
-#define IRQ_IOP32X_CORE_PMU	IOP_IRQ(16)
-#define IRQ_IOP32X_BIU_ERR	IOP_IRQ(17)
-#define IRQ_IOP32X_ATU_ERR	IOP_IRQ(18)
-#define IRQ_IOP32X_MCU_ERR	IOP_IRQ(19)
-#define IRQ_IOP32X_DMA0_ERR	IOP_IRQ(20)
-#define IRQ_IOP32X_DMA1_ERR	IOP_IRQ(21)
-#define IRQ_IOP32X_AA_ERR	IOP_IRQ(23)
-#define IRQ_IOP32X_MSG_ERR	IOP_IRQ(24)
-#define IRQ_IOP32X_SSP		IOP_IRQ(25)
-#define IRQ_IOP32X_XINT0	IOP_IRQ(27)
-#define IRQ_IOP32X_XINT1	IOP_IRQ(28)
-#define IRQ_IOP32X_XINT2	IOP_IRQ(29)
-#define IRQ_IOP32X_XINT3	IOP_IRQ(30)
-#define IRQ_IOP32X_HPI		IOP_IRQ(31)
-
-#define IOP32X_NR_IRQS		(IRQ_IOP32X_HPI + 1)
-
-#endif
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
deleted file mode 100644
index bb1e2e11bf35..000000000000
--- a/arch/arm/mach-iop32x/n2100.c
+++ /dev/null
@@ -1,367 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/mach-iop32x/n2100.c
- *
- * Board support code for the Thecus N2100 platform.
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright 2003 (c) MontaVista, Software, Inc.
- * Copyright (C) 2004 Intel Corp.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/f75375s.h>
-#include <linux/leds-pca9532.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/platform_device.h>
-#include <linux/reboot.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/pci.h>
-#include <asm/mach/time.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-
-#include "hardware.h"
-#include "irqs.h"
-#include "gpio-iop32x.h"
-
-/*
- * N2100 timer tick configuration.
- */
-static void __init n2100_timer_init(void)
-{
-	/* 33.000 MHz crystal.  */
-	iop_init_time(198000000);
-}
-
-
-/*
- * N2100 I/O.
- */
-static struct map_desc n2100_io_desc[] __initdata = {
-	{	/* on-board devices */
-		.virtual	= N2100_UART,
-		.pfn		= __phys_to_pfn(N2100_UART),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	},
-};
-
-void __init n2100_map_io(void)
-{
-	iop3xx_map_io();
-	iotable_init(n2100_io_desc, ARRAY_SIZE(n2100_io_desc));
-}
-
-
-/*
- * N2100 PCI.
- */
-static int n2100_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	if (PCI_SLOT(dev->devfn) == 1) {
-		/* RTL8110SB #1 */
-		irq = IRQ_IOP32X_XINT0;
-	} else if (PCI_SLOT(dev->devfn) == 2) {
-		/* RTL8110SB #2 */
-		irq = IRQ_IOP32X_XINT3;
-	} else if (PCI_SLOT(dev->devfn) == 3) {
-		/* Sil3512 */
-		irq = IRQ_IOP32X_XINT2;
-	} else if (PCI_SLOT(dev->devfn) == 4 && pin == 1) {
-		/* VT6212 INTA */
-		irq = IRQ_IOP32X_XINT1;
-	} else if (PCI_SLOT(dev->devfn) == 4 && pin == 2) {
-		/* VT6212 INTB */
-		irq = IRQ_IOP32X_XINT0;
-	} else if (PCI_SLOT(dev->devfn) == 4 && pin == 3) {
-		/* VT6212 INTC */
-		irq = IRQ_IOP32X_XINT2;
-	} else if (PCI_SLOT(dev->devfn) == 5) {
-		/* Mini-PCI slot */
-		irq = IRQ_IOP32X_XINT3;
-	} else {
-		printk(KERN_ERR "n2100_pci_map_irq() called for unknown "
-			"device PCI:%d:%d:%d\n", dev->bus->number,
-			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-		irq = -1;
-	}
-
-	return irq;
-}
-
-static struct hw_pci n2100_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &iop3xx_ops,
-	.setup		= iop3xx_pci_setup,
-	.preinit	= iop3xx_pci_preinit,
-	.map_irq	= n2100_pci_map_irq,
-};
-
-/*
- * Both r8169 chips on the n2100 exhibit PCI parity problems.  Turn
- * off parity reporting for both ports so we don't get error interrupts
- * for them.
- */
-static void n2100_fixup_r8169(struct pci_dev *dev)
-{
-	if (dev->bus->number == 0 &&
-	    (dev->devfn == PCI_DEVFN(1, 0) ||
-	     dev->devfn == PCI_DEVFN(2, 0)))
-		pci_disable_parity(dev);
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_REALTEK, PCI_ANY_ID, n2100_fixup_r8169);
-
-static int __init n2100_pci_init(void)
-{
-	if (machine_is_n2100())
-		pci_common_init(&n2100_pci);
-
-	return 0;
-}
-
-subsys_initcall(n2100_pci_init);
-
-
-/*
- * N2100 machine initialisation.
- */
-static struct physmap_flash_data n2100_flash_data = {
-	.width		= 2,
-};
-
-static struct resource n2100_flash_resource = {
-	.start		= 0xf0000000,
-	.end		= 0xf0ffffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device n2100_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &n2100_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &n2100_flash_resource,
-};
-
-
-static struct plat_serial8250_port n2100_serial_port[] = {
-	{
-		.mapbase	= N2100_UART,
-		.membase	= (char *)N2100_UART,
-		.irq		= 0,
-		.flags		= UPF_SKIP_TEST | UPF_AUTO_IRQ | UPF_SHARE_IRQ,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= 1843200,
-	},
-	{ },
-};
-
-static struct resource n2100_uart_resource = {
-	.start		= N2100_UART,
-	.end		= N2100_UART + 7,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device n2100_serial_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev		= {
-		.platform_data		= n2100_serial_port,
-	},
-	.num_resources	= 1,
-	.resource	= &n2100_uart_resource,
-};
-
-static struct f75375s_platform_data n2100_f75375s = {
-	.pwm		= { 255, 255 },
-	.pwm_enable = { 0, 0 },
-};
-
-static struct pca9532_platform_data n2100_leds = {
-	.leds = {
-	{	.name = "n2100:red:satafail0",
-		.state = PCA9532_OFF,
-		.type = PCA9532_TYPE_LED,
-	},
-	{	.name = "n2100:red:satafail1",
-		.state = PCA9532_OFF,
-		.type = PCA9532_TYPE_LED,
-	},
-	{	.name = "n2100:blue:usb",
-		.state = PCA9532_OFF,
-		.type = PCA9532_TYPE_LED,
-	},
-	{ 	.type = PCA9532_TYPE_NONE },
-
-	{ 	.type = PCA9532_TYPE_NONE },
-	{ 	.type = PCA9532_TYPE_NONE },
-	{ 	.type = PCA9532_TYPE_NONE },
-	{	.name = "n2100:red:usb",
-		.state = PCA9532_OFF,
-		.type = PCA9532_TYPE_LED,
-	},
-
-	{	.type = PCA9532_TYPE_NONE }, /* power OFF gpio */
-	{	.type = PCA9532_TYPE_NONE }, /* reset gpio */
-	{	.type = PCA9532_TYPE_NONE },
-	{	.type = PCA9532_TYPE_NONE },
-
-	{	.type = PCA9532_TYPE_NONE },
-	{	.name = "n2100:orange:system",
-		.state = PCA9532_OFF,
-		.type = PCA9532_TYPE_LED,
-	},
-	{	.name = "n2100:red:system",
-		.state = PCA9532_OFF,
-		.type = PCA9532_TYPE_LED,
-	},
-	{	.name = "N2100 beeper"  ,
-		.state =  PCA9532_OFF,
-		.type = PCA9532_TYPE_N2100_BEEP,
-	},
-	},
-	.psc = { 0, 0 },
-	.pwm = { 0, 0 },
-};
-
-static struct i2c_board_info __initdata n2100_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("rs5c372b", 0x32),
-	},
-	{
-		I2C_BOARD_INFO("f75375", 0x2e),
-		.platform_data = &n2100_f75375s,
-	},
-	{
-		I2C_BOARD_INFO("pca9532", 0x60),
-		.platform_data = &n2100_leds,
-	},
-};
-
-/*
- * Pull PCA9532 GPIO #8 low to power off the machine.
- */
-static void n2100_power_off(void)
-{
-	local_irq_disable();
-
-	/* Start condition, I2C address of PCA9532, write transaction.  */
-	*IOP3XX_IDBR0 = 0xc0;
-	*IOP3XX_ICR0 = 0xe9;
-	mdelay(1);
-
-	/* Write address 0x08.  */
-	*IOP3XX_IDBR0 = 0x08;
-	*IOP3XX_ICR0 = 0xe8;
-	mdelay(1);
-
-	/* Write data 0x01, stop condition.  */
-	*IOP3XX_IDBR0 = 0x01;
-	*IOP3XX_ICR0 = 0xea;
-
-	while (1)
-		;
-}
-
-static void n2100_restart(enum reboot_mode mode, const char *cmd)
-{
-	int ret;
-
-	ret = gpio_direction_output(N2100_HARDWARE_RESET, 0);
-	if (ret) {
-		pr_crit("could not drive reset GPIO low\n");
-		return;
-	}
-	/* Wait for reset to happen */
-	while (1)
-		;
-}
-
-
-static struct timer_list power_button_poll_timer;
-
-static void power_button_poll(struct timer_list *unused)
-{
-	if (gpio_get_value(N2100_POWER_BUTTON) == 0) {
-		ctrl_alt_del();
-		return;
-	}
-
-	power_button_poll_timer.expires = jiffies + (HZ / 10);
-	add_timer(&power_button_poll_timer);
-}
-
-static int __init n2100_request_gpios(void)
-{
-	int ret;
-
-	if (!machine_is_n2100())
-		return 0;
-
-	ret = gpio_request(N2100_HARDWARE_RESET, "reset");
-	if (ret)
-		pr_err("could not request reset GPIO\n");
-
-	ret = gpio_request(N2100_POWER_BUTTON, "power");
-	if (ret)
-		pr_err("could not request power GPIO\n");
-	else {
-		ret = gpio_direction_input(N2100_POWER_BUTTON);
-		if (ret)
-			pr_err("could not set power GPIO as input\n");
-	}
-	/* Set up power button poll timer */
-	timer_setup(&power_button_poll_timer, power_button_poll, 0);
-	power_button_poll_timer.expires = jiffies + (HZ / 10);
-	add_timer(&power_button_poll_timer);
-	return 0;
-}
-device_initcall(n2100_request_gpios);
-
-static void __init n2100_init_machine(void)
-{
-	register_iop32x_gpio();
-	gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup);
-	platform_device_register(&iop3xx_i2c0_device);
-	platform_device_register(&n2100_flash_device);
-	platform_device_register(&n2100_serial_device);
-	platform_device_register(&iop3xx_dma_0_channel);
-	platform_device_register(&iop3xx_dma_1_channel);
-
-	i2c_register_board_info(0, n2100_i2c_devices,
-		ARRAY_SIZE(n2100_i2c_devices));
-
-	pm_power_off = n2100_power_off;
-}
-
-MACHINE_START(N2100, "Thecus N2100")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= IOP32X_NR_IRQS,
-	.map_io		= n2100_map_io,
-	.init_irq	= iop32x_init_irq,
-	.init_time	= n2100_timer_init,
-	.init_machine	= n2100_init_machine,
-	.restart	= n2100_restart,
-MACHINE_END
diff --git a/arch/arm/mach-iop32x/n2100.h b/arch/arm/mach-iop32x/n2100.h
deleted file mode 100644
index 0b97b940d3e7..000000000000
--- a/arch/arm/mach-iop32x/n2100.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Thecus N2100 board registers
- */
-
-#ifndef __N2100_H
-#define __N2100_H
-
-#define N2100_UART		0xfe800000	/* UART */
-
-#define N2100_COPY_BUTTON	IOP3XX_GPIO_LINE(0)
-#define N2100_PCA9532_RESET	IOP3XX_GPIO_LINE(2)
-#define N2100_RESET_BUTTON	IOP3XX_GPIO_LINE(3)
-#define N2100_HARDWARE_RESET	IOP3XX_GPIO_LINE(4)
-#define N2100_POWER_BUTTON	IOP3XX_GPIO_LINE(5)
-
-
-#endif
diff --git a/arch/arm/mach-iop32x/pci.c b/arch/arm/mach-iop32x/pci.c
deleted file mode 100644
index 7a215d2ee7e2..000000000000
--- a/arch/arm/mach-iop32x/pci.c
+++ /dev/null
@@ -1,404 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/plat-iop/pci.c
- *
- * PCI support for the Intel IOP32X and IOP33X processors
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <asm/irq.h>
-#include <asm/signal.h>
-#include <asm/mach/pci.h>
-#include "hardware.h"
-#include "iop3xx.h"
-
-// #define DEBUG
-
-#ifdef DEBUG
-#define  DBG(x...) printk(x)
-#else
-#define  DBG(x...) do { } while (0)
-#endif
-
-/*
- * This routine builds either a type0 or type1 configuration command.  If the
- * bus is on the 803xx then a type0 made, else a type1 is created.
- */
-static u32 iop3xx_cfg_address(struct pci_bus *bus, int devfn, int where)
-{
-	struct pci_sys_data *sys = bus->sysdata;
-	u32 addr;
-
-	if (sys->busnr == bus->number)
-		addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11);
-	else
-		addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1;
-
-	addr |=	PCI_FUNC(devfn) << 8 | (where & ~3);
-
-	return addr;
-}
-
-/*
- * This routine checks the status of the last configuration cycle.  If an error
- * was detected it returns a 1, else it returns a 0.  The errors being checked
- * are parity, master abort, target abort (master and target).  These types of
- * errors occur during a config cycle where there is no device, like during
- * the discovery stage.
- */
-static int iop3xx_pci_status(void)
-{
-	unsigned int status;
-	int ret = 0;
-
-	/*
-	 * Check the status registers.
-	 */
-	status = *IOP3XX_ATUSR;
-	if (status & 0xf900) {
-		DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status);
-		*IOP3XX_ATUSR = status & 0xf900;
-		ret = 1;
-	}
-
-	status = *IOP3XX_ATUISR;
-	if (status & 0x679f) {
-		DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status);
-		*IOP3XX_ATUISR = status & 0x679f;
-		ret = 1;
-	}
-
-	return ret;
-}
-
-/*
- * Simply write the address register and read the configuration
- * data.  Note that the 4 nops ensure that we are able to handle
- * a delayed abort (in theory.)
- */
-static u32 iop3xx_read(unsigned long addr)
-{
-	u32 val;
-
-	__asm__ __volatile__(
-		"str	%1, [%2]\n\t"
-		"ldr	%0, [%3]\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		: "=r" (val)
-		: "r" (addr), "r" (IOP3XX_OCCAR), "r" (IOP3XX_OCCDR));
-
-	return val;
-}
-
-/*
- * The read routines must check the error status of the last configuration
- * cycle.  If there was an error, the routine returns all hex f's.
- */
-static int
-iop3xx_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 *value)
-{
-	unsigned long addr = iop3xx_cfg_address(bus, devfn, where);
-	u32 val = iop3xx_read(addr) >> ((where & 3) * 8);
-
-	if (iop3xx_pci_status())
-		val = 0xffffffff;
-
-	*value = val;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-iop3xx_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 value)
-{
-	unsigned long addr = iop3xx_cfg_address(bus, devfn, where);
-	u32 val;
-
-	if (size != 4) {
-		val = iop3xx_read(addr);
-		if (iop3xx_pci_status())
-			return PCIBIOS_SUCCESSFUL;
-
-		where = (where & 3) * 8;
-
-		if (size == 1)
-			val &= ~(0xff << where);
-		else
-			val &= ~(0xffff << where);
-
-		*IOP3XX_OCCDR = val | value << where;
-	} else {
-		asm volatile(
-			"str	%1, [%2]\n\t"
-			"str	%0, [%3]\n\t"
-			"nop\n\t"
-			"nop\n\t"
-			"nop\n\t"
-			"nop\n\t"
-			:
-			: "r" (value), "r" (addr),
-			  "r" (IOP3XX_OCCAR), "r" (IOP3XX_OCCDR));
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops iop3xx_ops = {
-	.read	= iop3xx_read_config,
-	.write	= iop3xx_write_config,
-};
-
-/*
- * When a PCI device does not exist during config cycles, the 80200 gets a
- * bus error instead of returning 0xffffffff. This handler simply returns.
- */
-static int
-iop3xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n",
-		addr, fsr, regs->ARM_pc, regs->ARM_lr);
-
-	/*
-	 * If it was an imprecise abort, then we need to correct the
-	 * return address to be _after_ the instruction.
-	 */
-	if (fsr & (1 << 10))
-		regs->ARM_pc += 4;
-
-	return 0;
-}
-
-int iop3xx_pci_setup(int nr, struct pci_sys_data *sys)
-{
-	struct resource *res;
-	struct resource realio;
-
-	if (nr != 0)
-		return 0;
-
-	res = kzalloc(sizeof(struct resource), GFP_KERNEL);
-	if (!res)
-		panic("PCI: unable to alloc resources");
-
-	res->start = IOP3XX_PCI_LOWER_MEM_PA;
-	res->end   = IOP3XX_PCI_LOWER_MEM_PA + IOP3XX_PCI_MEM_WINDOW_SIZE - 1;
-	res->name  = "IOP3XX PCI Memory Space";
-	res->flags = IORESOURCE_MEM;
-	request_resource(&iomem_resource, res);
-
-	/*
-	 * Use whatever translation is already setup.
-	 */
-	sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - *IOP3XX_OMWTVR0;
-
-	pci_add_resource_offset(&sys->resources, res, sys->mem_offset);
-
-	realio.start = 0;
-	realio.end = realio.start + SZ_64K - 1;
-	pci_remap_iospace(&realio, IOP3XX_PCI_LOWER_IO_PA);
-
-	return 1;
-}
-
-void __init iop3xx_atu_setup(void)
-{
-	/* BAR 0 ( Disabled ) */
-	*IOP3XX_IAUBAR0 = 0x0;
-	*IOP3XX_IABAR0  = 0x0;
-	*IOP3XX_IATVR0  = 0x0;
-	*IOP3XX_IALR0   = 0x0;
-
-	/* BAR 1 ( Disabled ) */
-	*IOP3XX_IAUBAR1 = 0x0;
-	*IOP3XX_IABAR1  = 0x0;
-	*IOP3XX_IALR1   = 0x0;
-
-	/* BAR 2 (1:1 mapping with Physical RAM) */
-	/* Set limit and enable */
-	*IOP3XX_IALR2 = ~((u32)IOP3XX_MAX_RAM_SIZE - 1) & ~0x1;
-	*IOP3XX_IAUBAR2 = 0x0;
-
-	/* Align the inbound bar with the base of memory */
-	*IOP3XX_IABAR2 = PHYS_OFFSET |
-			       PCI_BASE_ADDRESS_MEM_TYPE_64 |
-			       PCI_BASE_ADDRESS_MEM_PREFETCH;
-
-	*IOP3XX_IATVR2 = PHYS_OFFSET;
-
-	/* Outbound window 0 */
-	*IOP3XX_OMWTVR0 = IOP3XX_PCI_LOWER_MEM_BA;
-	*IOP3XX_OUMWTVR0 = 0;
-
-	/* Outbound window 1 */
-	*IOP3XX_OMWTVR1 = IOP3XX_PCI_LOWER_MEM_BA +
-			  IOP3XX_PCI_MEM_WINDOW_SIZE / 2;
-	*IOP3XX_OUMWTVR1 = 0;
-
-	/* BAR 3 ( Disabled ) */
-	*IOP3XX_IAUBAR3 = 0x0;
-	*IOP3XX_IABAR3  = 0x0;
-	*IOP3XX_IATVR3  = 0x0;
-	*IOP3XX_IALR3   = 0x0;
-
-	/* Setup the I/O Bar
-	 */
-	*IOP3XX_OIOWTVR = IOP3XX_PCI_LOWER_IO_BA;
-
-	/* Enable inbound and outbound cycles
-	 */
-	*IOP3XX_ATUCMD |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
-			       PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
-	*IOP3XX_ATUCR |= IOP3XX_ATUCR_OUT_EN;
-}
-
-void __init iop3xx_atu_disable(void)
-{
-	*IOP3XX_ATUCMD = 0;
-	*IOP3XX_ATUCR = 0;
-
-	/* wait for cycles to quiesce */
-	while (*IOP3XX_PCSR & (IOP3XX_PCSR_OUT_Q_BUSY |
-				     IOP3XX_PCSR_IN_Q_BUSY))
-		cpu_relax();
-
-	/* BAR 0 ( Disabled ) */
-	*IOP3XX_IAUBAR0 = 0x0;
-	*IOP3XX_IABAR0  = 0x0;
-	*IOP3XX_IATVR0  = 0x0;
-	*IOP3XX_IALR0   = 0x0;
-
-	/* BAR 1 ( Disabled ) */
-	*IOP3XX_IAUBAR1 = 0x0;
-	*IOP3XX_IABAR1  = 0x0;
-	*IOP3XX_IALR1   = 0x0;
-
-	/* BAR 2 ( Disabled ) */
-	*IOP3XX_IAUBAR2 = 0x0;
-	*IOP3XX_IABAR2  = 0x0;
-	*IOP3XX_IATVR2  = 0x0;
-	*IOP3XX_IALR2   = 0x0;
-
-	/* BAR 3 ( Disabled ) */
-	*IOP3XX_IAUBAR3 = 0x0;
-	*IOP3XX_IABAR3  = 0x0;
-	*IOP3XX_IATVR3  = 0x0;
-	*IOP3XX_IALR3   = 0x0;
-
-	/* Clear the outbound windows */
-	*IOP3XX_OIOWTVR  = 0;
-
-	/* Outbound window 0 */
-	*IOP3XX_OMWTVR0 = 0;
-	*IOP3XX_OUMWTVR0 = 0;
-
-	/* Outbound window 1 */
-	*IOP3XX_OMWTVR1 = 0;
-	*IOP3XX_OUMWTVR1 = 0;
-}
-
-/* Flag to determine whether the ATU is initialized and the PCI bus scanned */
-int init_atu;
-
-int iop3xx_get_init_atu(void) {
-	/* check if default has been overridden */
-	if (init_atu != IOP3XX_INIT_ATU_DEFAULT)
-		return init_atu;
-	else
-		return IOP3XX_INIT_ATU_DISABLE;
-}
-
-static void __init iop3xx_atu_debug(void)
-{
-	DBG("PCI: Intel IOP3xx PCI init.\n");
-	DBG("PCI: Outbound memory window 0: PCI 0x%08x%08x\n",
-		*IOP3XX_OUMWTVR0, *IOP3XX_OMWTVR0);
-	DBG("PCI: Outbound memory window 1: PCI 0x%08x%08x\n",
-		*IOP3XX_OUMWTVR1, *IOP3XX_OMWTVR1);
-	DBG("PCI: Outbound IO window: PCI 0x%08x\n",
-		*IOP3XX_OIOWTVR);
-
-	DBG("PCI: Inbound memory window 0: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
-		*IOP3XX_IAUBAR0, *IOP3XX_IABAR0, *IOP3XX_IALR0, *IOP3XX_IATVR0);
-	DBG("PCI: Inbound memory window 1: PCI 0x%08x%08x 0x%08x\n",
-		*IOP3XX_IAUBAR1, *IOP3XX_IABAR1, *IOP3XX_IALR1);
-	DBG("PCI: Inbound memory window 2: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
-		*IOP3XX_IAUBAR2, *IOP3XX_IABAR2, *IOP3XX_IALR2, *IOP3XX_IATVR2);
-	DBG("PCI: Inbound memory window 3: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
-		*IOP3XX_IAUBAR3, *IOP3XX_IABAR3, *IOP3XX_IALR3, *IOP3XX_IATVR3);
-
-	DBG("PCI: Expansion ROM window: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
-		0, *IOP3XX_ERBAR, *IOP3XX_ERLR, *IOP3XX_ERTVR);
-
-	DBG("ATU: IOP3XX_ATUCMD=0x%04x\n", *IOP3XX_ATUCMD);
-	DBG("ATU: IOP3XX_ATUCR=0x%08x\n", *IOP3XX_ATUCR);
-
-	hook_fault_code(16+6, iop3xx_pci_abort, SIGBUS, 0, "imprecise external abort");
-}
-
-/* for platforms that might be host-bus-adapters */
-void __init iop3xx_pci_preinit_cond(void)
-{
-	if (iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) {
-		iop3xx_atu_disable();
-		iop3xx_atu_setup();
-		iop3xx_atu_debug();
-	}
-}
-
-void __init iop3xx_pci_preinit(void)
-{
-	pcibios_min_mem = 0;
-
-	iop3xx_atu_disable();
-	iop3xx_atu_setup();
-	iop3xx_atu_debug();
-}
-
-/* allow init_atu to be user overridden */
-static int __init iop3xx_init_atu_setup(char *str)
-{
-	init_atu = IOP3XX_INIT_ATU_DEFAULT;
-	if (str) {
-		while (*str != '\0') {
-			switch (*str) {
-			case 'y':
-			case 'Y':
-				init_atu = IOP3XX_INIT_ATU_ENABLE;
-				break;
-			case 'n':
-			case 'N':
-				init_atu = IOP3XX_INIT_ATU_DISABLE;
-				break;
-			case ',':
-			case '=':
-				break;
-			default:
-				printk(KERN_DEBUG "\"%s\" malformed at "
-					    "character: \'%c\'",
-					    __func__,
-					    *str);
-				*(str + 1) = '\0';
-			}
-			str++;
-		}
-	}
-
-	return 1;
-}
-
-__setup("iop3xx_init_atu", iop3xx_init_atu_setup);
-
diff --git a/arch/arm/mach-iop32x/pmu.c b/arch/arm/mach-iop32x/pmu.c
deleted file mode 100644
index bdbc7a3cb8a3..000000000000
--- a/arch/arm/mach-iop32x/pmu.c
+++ /dev/null
@@ -1,29 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * PMU IRQ registration for the iop3xx xscale PMU families.
- * Copyright (C) 2010 Will Deacon, ARM Ltd.
- */
-
-#include <linux/platform_device.h>
-#include "irqs.h"
-
-static struct resource pmu_resource = {
-	.start	= IRQ_IOP32X_CORE_PMU,
-	.end	= IRQ_IOP32X_CORE_PMU,
-	.flags	= IORESOURCE_IRQ,
-};
-
-static struct platform_device pmu_device = {
-	.name		= "xscale-pmu",
-	.id		= -1,
-	.resource	= &pmu_resource,
-	.num_resources	= 1,
-};
-
-static int __init iop3xx_pmu_init(void)
-{
-	platform_device_register(&pmu_device);
-	return 0;
-}
-
-arch_initcall(iop3xx_pmu_init);
diff --git a/arch/arm/mach-iop32x/restart.c b/arch/arm/mach-iop32x/restart.c
deleted file mode 100644
index 3dfa54d3a7a8..000000000000
--- a/arch/arm/mach-iop32x/restart.c
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * restart.c
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- */
-#include <asm/system_misc.h>
-#include "hardware.h"
-#include "iop3xx.h"
-
-void iop3xx_restart(enum reboot_mode mode, const char *cmd)
-{
-	*IOP3XX_PCSR = 0x30;
-
-	/* Jump into ROM at address 0 */
-	soft_restart(0);
-}
diff --git a/arch/arm/mach-iop32x/setup.c b/arch/arm/mach-iop32x/setup.c
deleted file mode 100644
index a0a81c28a632..000000000000
--- a/arch/arm/mach-iop32x/setup.c
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/plat-iop/setup.c
- *
- * Author: Nicolas Pitre <nico@fluxnic.net>
- * Copyright (C) 2001 MontaVista Software, Inc.
- * Copyright (C) 2004 Intel Corporation.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <asm/mach/map.h>
-#include "iop3xx.h"
-
-/*
- * Standard IO mapping for all IOP3xx based systems.  Note that
- * the IOP3xx OCCDR must be mapped uncached and unbuffered.
- */
-static struct map_desc iop3xx_std_desc[] __initdata = {
-	{	/* mem mapped registers */
-		.virtual	= IOP3XX_PERIPHERAL_VIRT_BASE,
-		.pfn		= __phys_to_pfn(IOP3XX_PERIPHERAL_PHYS_BASE),
-		.length		= IOP3XX_PERIPHERAL_SIZE,
-		.type		= MT_UNCACHED,
-	},
-};
-
-void __init iop3xx_map_io(void)
-{
-	iotable_init(iop3xx_std_desc, ARRAY_SIZE(iop3xx_std_desc));
-}
diff --git a/arch/arm/mach-iop32x/time.c b/arch/arm/mach-iop32x/time.c
deleted file mode 100644
index ae533b66fefd..000000000000
--- a/arch/arm/mach-iop32x/time.c
+++ /dev/null
@@ -1,179 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * arch/arm/plat-iop/time.c
- *
- * Timer code for IOP32x and IOP33x based systems
- *
- * Author: Deepak Saxena <dsaxena@mvista.com>
- *
- * Copyright 2002-2003 MontaVista Software Inc.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/init.h>
-#include <linux/timex.h>
-#include <linux/io.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/export.h>
-#include <linux/sched_clock.h>
-#include <asm/irq.h>
-#include <linux/uaccess.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-
-#include "hardware.h"
-#include "irqs.h"
-
-/*
- * Minimum clocksource/clockevent timer range in seconds
- */
-#define IOP_MIN_RANGE 4
-
-/*
- * IOP clocksource (free-running timer 1).
- */
-static u64 notrace iop_clocksource_read(struct clocksource *unused)
-{
-	return 0xffffffffu - read_tcr1();
-}
-
-static struct clocksource iop_clocksource = {
-	.name 		= "iop_timer1",
-	.rating		= 300,
-	.read		= iop_clocksource_read,
-	.mask		= CLOCKSOURCE_MASK(32),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-/*
- * IOP sched_clock() implementation via its clocksource.
- */
-static u64 notrace iop_read_sched_clock(void)
-{
-	return 0xffffffffu - read_tcr1();
-}
-
-/*
- * IOP clockevents (interrupting timer 0).
- */
-static int iop_set_next_event(unsigned long delta,
-			      struct clock_event_device *unused)
-{
-	u32 tmr = IOP_TMR_PRIVILEGED | IOP_TMR_RATIO_1_1;
-
-	BUG_ON(delta == 0);
-	write_tmr0(tmr & ~(IOP_TMR_EN | IOP_TMR_RELOAD));
-	write_tcr0(delta);
-	write_tmr0((tmr & ~IOP_TMR_RELOAD) | IOP_TMR_EN);
-
-	return 0;
-}
-
-static unsigned long ticks_per_jiffy;
-
-static int iop_set_periodic(struct clock_event_device *evt)
-{
-	u32 tmr = read_tmr0();
-
-	write_tmr0(tmr & ~IOP_TMR_EN);
-	write_tcr0(ticks_per_jiffy - 1);
-	write_trr0(ticks_per_jiffy - 1);
-	tmr |= (IOP_TMR_RELOAD | IOP_TMR_EN);
-
-	write_tmr0(tmr);
-	return 0;
-}
-
-static int iop_set_oneshot(struct clock_event_device *evt)
-{
-	u32 tmr = read_tmr0();
-
-	/* ->set_next_event sets period and enables timer */
-	tmr &= ~(IOP_TMR_RELOAD | IOP_TMR_EN);
-	write_tmr0(tmr);
-	return 0;
-}
-
-static int iop_shutdown(struct clock_event_device *evt)
-{
-	u32 tmr = read_tmr0();
-
-	tmr &= ~IOP_TMR_EN;
-	write_tmr0(tmr);
-	return 0;
-}
-
-static int iop_resume(struct clock_event_device *evt)
-{
-	u32 tmr = read_tmr0();
-
-	tmr |= IOP_TMR_EN;
-	write_tmr0(tmr);
-	return 0;
-}
-
-static struct clock_event_device iop_clockevent = {
-	.name			= "iop_timer0",
-	.features		= CLOCK_EVT_FEAT_PERIODIC |
-				  CLOCK_EVT_FEAT_ONESHOT,
-	.rating			= 300,
-	.set_next_event		= iop_set_next_event,
-	.set_state_shutdown	= iop_shutdown,
-	.set_state_periodic	= iop_set_periodic,
-	.tick_resume		= iop_resume,
-	.set_state_oneshot	= iop_set_oneshot,
-};
-
-static irqreturn_t
-iop_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = dev_id;
-
-	write_tisr(1);
-	evt->event_handler(evt);
-	return IRQ_HANDLED;
-}
-
-static unsigned long iop_tick_rate;
-unsigned long get_iop_tick_rate(void)
-{
-	return iop_tick_rate;
-}
-EXPORT_SYMBOL(get_iop_tick_rate);
-
-void __init iop_init_time(unsigned long tick_rate)
-{
-	u32 timer_ctl;
-	int irq = IRQ_IOP32X_TIMER0;
-
-	sched_clock_register(iop_read_sched_clock, 32, tick_rate);
-
-	ticks_per_jiffy = DIV_ROUND_CLOSEST(tick_rate, HZ);
-	iop_tick_rate = tick_rate;
-
-	timer_ctl = IOP_TMR_EN | IOP_TMR_PRIVILEGED |
-			IOP_TMR_RELOAD | IOP_TMR_RATIO_1_1;
-
-	/*
-	 * Set up interrupting clockevent timer 0.
-	 */
-	write_tmr0(timer_ctl & ~IOP_TMR_EN);
-	write_tisr(1);
-	if (request_irq(irq, iop_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
-			"IOP Timer Tick", &iop_clockevent))
-		pr_err("Failed to request irq() %d (IOP Timer Tick)\n", irq);
-	iop_clockevent.cpumask = cpumask_of(0);
-	clockevents_config_and_register(&iop_clockevent, tick_rate,
-					0xf, 0xfffffffe);
-
-	/*
-	 * Set up free-running clocksource timer 1.
-	 */
-	write_trr1(0xffffffff);
-	write_tcr1(0xffffffff);
-	write_tmr1(timer_ctl);
-	clocksource_register_hz(&iop_clocksource, tick_rate);
-}
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index d71417d57961..85b0d9ddb7d8 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -13,99 +13,6 @@ if ARCH_MMP
 
 menu "Marvell PXA168/910/MMP2 Implementations"
 
-if ATAGS
-
-config MACH_ASPENITE
-	bool "Marvell's PXA168 Aspenite Development Board"
-	depends on ARCH_MULTI_V5
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA168
-	help
-	  Say 'Y' here if you want to support the Marvell PXA168-based
-	  Aspenite Development Board.
-
-config MACH_ZYLONITE2
-	bool "Marvell's PXA168 Zylonite2 Development Board"
-	depends on ARCH_MULTI_V5
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA168
-	help
-	  Say 'Y' here if you want to support the Marvell PXA168-based
-	  Zylonite2 Development Board.
-
-config MACH_AVENGERS_LITE
-	bool "Marvell's PXA168 Avengers Lite Development Board"
-	depends on ARCH_MULTI_V5
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA168
-	help
-	  Say 'Y' here if you want to support the Marvell PXA168-based
-	  Avengers Lite Development Board.
-
-config MACH_TTC_DKB
-	bool "Marvell's PXA910 TavorEVB/TTC_DKB Development Board"
-	depends on ARCH_MULTI_V5
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA910
-	help
-	  Say 'Y' here if you want to support the Marvell PXA910-based
-	  TTC_DKB Development Board.
-
-config MACH_BROWNSTONE
-	bool "Marvell's Brownstone Development Platform"
-	depends on ARCH_MULTI_V7
-	depends on UNUSED_BOARD_FILES
-	select CPU_MMP2
-	help
-	  Say 'Y' here if you want to support the Marvell MMP2-based
-	  Brown Development Platform.
-	  MMP2-based board can't be co-existed with PXA168-based &
-	  PXA910-based development board. Since MMP2 is compatible to
-	  ARMv7 architecture.
-
-config MACH_FLINT
-	bool "Marvell's Flint Development Platform"
-	depends on ARCH_MULTI_V7
-	depends on UNUSED_BOARD_FILES
-	select CPU_MMP2
-	help
-	  Say 'Y' here if you want to support the Marvell MMP2-based
-	  Flint Development Platform.
-	  MMP2-based board can't be co-existed with PXA168-based &
-	  PXA910-based development board. Since MMP2 is compatible to
-	  ARMv7 architecture.
-
-config MACH_MARVELL_JASPER
-	bool "Marvell's Jasper Development Platform"
-	depends on ARCH_MULTI_V7
-	depends on UNUSED_BOARD_FILES
-	select CPU_MMP2
-	help
-	  Say 'Y' here if you want to support the Marvell MMP2-base
-	  Jasper Development Platform.
-	  MMP2-based board can't be co-existed with PXA168-based &
-	  PXA910-based development board. Since MMP2 is compatible to
-	  ARMv7 architecture.
-
-config MACH_TETON_BGA
-	bool "Marvell's PXA168 Teton BGA Development Board"
-	depends on ARCH_MULTI_V5
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA168
-	help
-	  Say 'Y' here if you want to support the Marvell PXA168-based
-	  Teton BGA Development Board.
-
-config MACH_GPLUGD
-	bool "Marvell's PXA168 GuruPlug Display (gplugD) Board"
-	depends on ARCH_MULTI_V5
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA168
-	help
-	  Say 'Y' here if you want to support the Marvell PXA168-based
-	  GuruPlug Display (gplugD) Board
-endif
-
 config MACH_MMP_DT
 	bool "Support MMP (ARMv5) platforms from device tree"
 	depends on ARCH_MULTI_V5
@@ -175,7 +82,4 @@ config USB_EHCI_MV_U2O
 	help
 	  Enables support for OTG controller which can be switched to host mode.
 
-config MMP_SRAM
-	bool
-
 endif
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 539d750aaf10..5d4a1a4a48cf 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -2,32 +2,13 @@
 #
 # Makefile for Marvell's PXA168 processors line
 #
-obj-y				+= common.o devices.o time.o
+obj-y				+= common.o time.o
 
-# SoC support
-obj-$(CONFIG_CPU_PXA168)	+= pxa168.o
-obj-$(CONFIG_CPU_PXA910)	+= pxa910.o
-obj-$(CONFIG_CPU_MMP2)		+= mmp2.o
-obj-$(CONFIG_MMP_SRAM)		+= sram.o
-
-ifeq ($(CONFIG_PM),y)
-obj-$(CONFIG_CPU_PXA910)	+= pm-pxa910.o
-obj-$(CONFIG_CPU_MMP2)		+= pm-mmp2.o
-endif
 ifeq ($(CONFIG_SMP),y)
 obj-$(CONFIG_MACH_MMP3_DT)	+= platsmp.o
 endif
 
 # board support
-obj-$(CONFIG_MACH_ASPENITE)	+= aspenite.o
-obj-$(CONFIG_MACH_ZYLONITE2)	+= aspenite.o
-obj-$(CONFIG_MACH_AVENGERS_LITE)+= avengers_lite.o
-obj-$(CONFIG_MACH_TTC_DKB)	+= ttc_dkb.o
-obj-$(CONFIG_MACH_BROWNSTONE)	+= brownstone.o
-obj-$(CONFIG_MACH_FLINT)	+= flint.o
-obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
 obj-$(CONFIG_MACH_MMP_DT)	+= mmp-dt.o
 obj-$(CONFIG_MACH_MMP2_DT)	+= mmp2-dt.o
 obj-$(CONFIG_MACH_MMP3_DT)	+= mmp3.o
-obj-$(CONFIG_MACH_TETON_BGA)	+= teton_bga.o
-obj-$(CONFIG_MACH_GPLUGD)	+= gplugd.o
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
deleted file mode 100644
index 6314824b62fc..000000000000
--- a/arch/arm/mach-mmp/aspenite.c
+++ /dev/null
@@ -1,284 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/aspenite.c
- *
- *  Support for the Marvell PXA168-based Aspenite and Zylonite2
- *  Development Platform.
- */
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/smc91x.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/interrupt.h>
-#include <linux/platform_data/mv_usb.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <video/pxa168fb.h>
-#include <linux/input.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-
-#include "addr-map.h"
-#include "mfp-pxa168.h"
-#include "pxa168.h"
-#include "pxa910.h"
-#include "irqs.h"
-#include "common.h"
-
-static unsigned long common_pin_config[] __initdata = {
-	/* Data Flash Interface */
-	GPIO0_DFI_D15,
-	GPIO1_DFI_D14,
-	GPIO2_DFI_D13,
-	GPIO3_DFI_D12,
-	GPIO4_DFI_D11,
-	GPIO5_DFI_D10,
-	GPIO6_DFI_D9,
-	GPIO7_DFI_D8,
-	GPIO8_DFI_D7,
-	GPIO9_DFI_D6,
-	GPIO10_DFI_D5,
-	GPIO11_DFI_D4,
-	GPIO12_DFI_D3,
-	GPIO13_DFI_D2,
-	GPIO14_DFI_D1,
-	GPIO15_DFI_D0,
-
-	/* Static Memory Controller */
-	GPIO18_SMC_nCS0,
-	GPIO34_SMC_nCS1,
-	GPIO23_SMC_nLUA,
-	GPIO25_SMC_nLLA,
-	GPIO28_SMC_RDY,
-	GPIO29_SMC_SCLK,
-	GPIO35_SMC_BE1,
-	GPIO36_SMC_BE2,
-	GPIO27_GPIO,	/* Ethernet IRQ */
-
-	/* UART1 */
-	GPIO107_UART1_RXD,
-	GPIO108_UART1_TXD,
-
-	/* SSP1 */
-	GPIO113_I2S_MCLK,
-	GPIO114_I2S_FRM,
-	GPIO115_I2S_BCLK,
-	GPIO116_I2S_RXD,
-	GPIO117_I2S_TXD,
-
-	/* LCD */
-	GPIO56_LCD_FCLK_RD,
-	GPIO57_LCD_LCLK_A0,
-	GPIO58_LCD_PCLK_WR,
-	GPIO59_LCD_DENA_BIAS,
-	GPIO60_LCD_DD0,
-	GPIO61_LCD_DD1,
-	GPIO62_LCD_DD2,
-	GPIO63_LCD_DD3,
-	GPIO64_LCD_DD4,
-	GPIO65_LCD_DD5,
-	GPIO66_LCD_DD6,
-	GPIO67_LCD_DD7,
-	GPIO68_LCD_DD8,
-	GPIO69_LCD_DD9,
-	GPIO70_LCD_DD10,
-	GPIO71_LCD_DD11,
-	GPIO72_LCD_DD12,
-	GPIO73_LCD_DD13,
-	GPIO74_LCD_DD14,
-	GPIO75_LCD_DD15,
-	GPIO76_LCD_DD16,
-	GPIO77_LCD_DD17,
-	GPIO78_LCD_DD18,
-	GPIO79_LCD_DD19,
-	GPIO80_LCD_DD20,
-	GPIO81_LCD_DD21,
-	GPIO82_LCD_DD22,
-	GPIO83_LCD_DD23,
-
-	/* Keypad */
-	GPIO109_KP_MKIN1,
-	GPIO110_KP_MKIN0,
-	GPIO111_KP_MKOUT7,
-	GPIO112_KP_MKOUT6,
-	GPIO121_KP_MKIN4,
-};
-
-static struct pxa_gpio_platform_data pxa168_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static struct smc91x_platdata smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= SMC_CS1_PHYS_BASE + 0x300,
-		.end	= SMC_CS1_PHYS_BASE + 0xfffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= MMP_GPIO_TO_IRQ(27),
-		.end	= MMP_GPIO_TO_IRQ(27),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct mtd_partition aspenite_nand_partitions[] = {
-	{
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= SZ_1M,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "reserved",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "reserved",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_8M,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= (SZ_2M + SZ_1M),
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_32M + SZ_16M,
-		.mask_flags	= 0,
-	}
-};
-
-static struct pxa3xx_nand_platform_data aspenite_nand_info = {
-	.parts		= aspenite_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(aspenite_nand_partitions),
-};
-
-static struct i2c_board_info aspenite_i2c_info[] __initdata = {
-	{ I2C_BOARD_INFO("wm8753", 0x1b), },
-};
-
-static struct fb_videomode video_modes[] = {
-	[0] = {
-		.pixclock	= 30120,
-		.refresh	= 60,
-		.xres		= 800,
-		.yres		= 480,
-		.hsync_len	= 1,
-		.left_margin	= 215,
-		.right_margin	= 40,
-		.vsync_len	= 1,
-		.upper_margin	= 34,
-		.lower_margin	= 10,
-		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
-	},
-};
-
-struct pxa168fb_mach_info aspenite_lcd_info = {
-	.id			= "Graphic Frame",
-	.modes			= video_modes,
-	.num_modes		= ARRAY_SIZE(video_modes),
-	.pix_fmt		= PIX_FMT_RGB565,
-	.io_pin_allocation_mode = PIN_MODE_DUMB_24,
-	.dumb_mode		= DUMB_MODE_RGB888,
-	.active			= 1,
-	.panel_rbswap		= 0,
-	.invert_pixclock	= 0,
-};
-
-static const unsigned int aspenite_matrix_key_map[] = {
-	KEY(0, 6, KEY_UP),	/* SW 4 */
-	KEY(0, 7, KEY_DOWN),	/* SW 5 */
-	KEY(1, 6, KEY_LEFT),	/* SW 6 */
-	KEY(1, 7, KEY_RIGHT),	/* SW 7 */
-	KEY(4, 6, KEY_ENTER),	/* SW 8 */
-	KEY(4, 7, KEY_ESC),	/* SW 9 */
-};
-
-static struct matrix_keymap_data aspenite_matrix_keymap_data = {
-	.keymap			= aspenite_matrix_key_map,
-	.keymap_size		= ARRAY_SIZE(aspenite_matrix_key_map),
-};
-
-static struct pxa27x_keypad_platform_data aspenite_keypad_info __initdata = {
-	.matrix_key_rows	= 5,
-	.matrix_key_cols	= 8,
-	.matrix_keymap_data	= &aspenite_matrix_keymap_data,
-	.debounce_interval	= 30,
-};
-
-#if IS_ENABLED(CONFIG_USB_EHCI_MV)
-static struct mv_usb_platform_data pxa168_sph_pdata = {
-	.mode           = MV_USB_MODE_HOST,
-	.phy_init	= pxa_usb_phy_init,
-	.phy_deinit	= pxa_usb_phy_deinit,
-	.set_vbus	= NULL,
-};
-#endif
-
-static void __init common_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(common_pin_config));
-
-	/* on-chip devices */
-	pxa168_add_uart(1);
-	pxa168_add_twsi(1, NULL, ARRAY_AND_SIZE(aspenite_i2c_info));
-	pxa168_add_ssp(1);
-	pxa168_add_nand(&aspenite_nand_info);
-	pxa168_add_fb(&aspenite_lcd_info);
-	pxa168_add_keypad(&aspenite_keypad_info);
-	platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_device_register(&pxa168_device_gpio);
-
-	/* off-chip devices */
-	platform_device_register(&smc91x_device);
-
-#if IS_ENABLED(CONFIG_USB_SUPPORT)
-#if IS_ENABLED(CONFIG_PHY_PXA_USB)
-	platform_device_register(&pxa168_device_usb_phy);
-#endif
-
-#if IS_ENABLED(CONFIG_USB_EHCI_MV)
-	pxa168_add_usb_host(&pxa168_sph_pdata);
-#endif
-#endif
-}
-
-MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= MMP_NR_IRQS,
-	.init_irq       = pxa168_init_irq,
-	.init_time	= pxa168_timer_init,
-	.init_machine   = common_init,
-	.restart	= pxa168_restart,
-MACHINE_END
-
-MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= MMP_NR_IRQS,
-	.init_irq       = pxa168_init_irq,
-	.init_time	= pxa168_timer_init,
-	.init_machine   = common_init,
-	.restart	= pxa168_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c
deleted file mode 100644
index 12e5a9441df9..000000000000
--- a/arch/arm/mach-mmp/avengers_lite.c
+++ /dev/null
@@ -1,55 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/avengers_lite.c
- *
- *  Support for the Marvell PXA168-based Avengers lite Development Platform.
- *
- *  Copyright (C) 2009-2010 Marvell International Ltd.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/gpio-pxa.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "addr-map.h"
-#include "mfp-pxa168.h"
-#include "pxa168.h"
-#include "irqs.h"
-
-
-#include "common.h"
-#include <linux/delay.h>
-
-/* Avengers lite MFP configurations */
-static unsigned long avengers_lite_pin_config_V16F[] __initdata = {
-	/* DEBUG_UART */
-	GPIO88_UART2_TXD,
-	GPIO89_UART2_RXD,
-};
-
-static struct pxa_gpio_platform_data pxa168_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static void __init avengers_lite_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(avengers_lite_pin_config_V16F));
-
-	/* on-chip devices */
-	pxa168_add_uart(2);
-	platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_device_register(&pxa168_device_gpio);
-}
-
-MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= MMP_NR_IRQS,
-	.init_irq       = pxa168_init_irq,
-	.init_time	= pxa168_timer_init,
-	.init_machine   = avengers_lite_init,
-	.restart	= pxa168_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
deleted file mode 100644
index ce93bc395546..000000000000
--- a/arch/arm/mach-mmp/brownstone.c
+++ /dev/null
@@ -1,237 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/brownstone.c
- *
- *  Support for the Marvell Brownstone Development Platform.
- *
- *  Copyright (C) 2009-2010 Marvell International Ltd.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio-pxa.h>
-#include <linux/gpio/machine.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/max8649.h>
-#include <linux/regulator/fixed.h>
-#include <linux/mfd/max8925.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "addr-map.h"
-#include "mfp-mmp2.h"
-#include "mmp2.h"
-#include "irqs.h"
-
-#include "common.h"
-
-#define BROWNSTONE_NR_IRQS	(MMP_NR_IRQS + 40)
-
-#define GPIO_5V_ENABLE		(89)
-
-static unsigned long brownstone_pin_config[] __initdata = {
-	/* UART1 */
-	GPIO29_UART1_RXD,
-	GPIO30_UART1_TXD,
-
-	/* UART3 */
-	GPIO51_UART3_RXD,
-	GPIO52_UART3_TXD,
-
-	/* DFI */
-	GPIO168_DFI_D0,
-	GPIO167_DFI_D1,
-	GPIO166_DFI_D2,
-	GPIO165_DFI_D3,
-	GPIO107_DFI_D4,
-	GPIO106_DFI_D5,
-	GPIO105_DFI_D6,
-	GPIO104_DFI_D7,
-	GPIO111_DFI_D8,
-	GPIO164_DFI_D9,
-	GPIO163_DFI_D10,
-	GPIO162_DFI_D11,
-	GPIO161_DFI_D12,
-	GPIO110_DFI_D13,
-	GPIO109_DFI_D14,
-	GPIO108_DFI_D15,
-	GPIO143_ND_nCS0,
-	GPIO144_ND_nCS1,
-	GPIO147_ND_nWE,
-	GPIO148_ND_nRE,
-	GPIO150_ND_ALE,
-	GPIO149_ND_CLE,
-	GPIO112_ND_RDY0,
-	GPIO160_ND_RDY1,
-
-	/* PMIC */
-	PMIC_PMIC_INT | MFP_LPM_EDGE_FALL,
-
-	/* MMC0 */
-	GPIO131_MMC1_DAT3 | MFP_PULL_HIGH,
-	GPIO132_MMC1_DAT2 | MFP_PULL_HIGH,
-	GPIO133_MMC1_DAT1 | MFP_PULL_HIGH,
-	GPIO134_MMC1_DAT0 | MFP_PULL_HIGH,
-	GPIO136_MMC1_CMD | MFP_PULL_HIGH,
-	GPIO139_MMC1_CLK,
-	GPIO140_MMC1_CD | MFP_PULL_LOW,
-	GPIO141_MMC1_WP | MFP_PULL_LOW,
-
-	/* MMC1 */
-	GPIO37_MMC2_DAT3 | MFP_PULL_HIGH,
-	GPIO38_MMC2_DAT2 | MFP_PULL_HIGH,
-	GPIO39_MMC2_DAT1 | MFP_PULL_HIGH,
-	GPIO40_MMC2_DAT0 | MFP_PULL_HIGH,
-	GPIO41_MMC2_CMD | MFP_PULL_HIGH,
-	GPIO42_MMC2_CLK,
-
-	/* MMC2 */
-	GPIO165_MMC3_DAT7 | MFP_PULL_HIGH,
-	GPIO162_MMC3_DAT6 | MFP_PULL_HIGH,
-	GPIO166_MMC3_DAT5 | MFP_PULL_HIGH,
-	GPIO163_MMC3_DAT4 | MFP_PULL_HIGH,
-	GPIO167_MMC3_DAT3 | MFP_PULL_HIGH,
-	GPIO164_MMC3_DAT2 | MFP_PULL_HIGH,
-	GPIO168_MMC3_DAT1 | MFP_PULL_HIGH,
-	GPIO111_MMC3_DAT0 | MFP_PULL_HIGH,
-	GPIO112_MMC3_CMD | MFP_PULL_HIGH,
-	GPIO151_MMC3_CLK,
-
-	/* 5V regulator */
-	GPIO89_GPIO,
-};
-
-static struct pxa_gpio_platform_data mmp2_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static struct regulator_consumer_supply max8649_supply[] = {
-	REGULATOR_SUPPLY("vcc_core", NULL),
-};
-
-static struct regulator_init_data max8649_init_data = {
-	.constraints	= {
-		.name		= "vcc_core range",
-		.min_uV		= 1150000,
-		.max_uV		= 1280000,
-		.always_on	= 1,
-		.boot_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &max8649_supply[0],
-};
-
-static struct max8649_platform_data brownstone_max8649_info = {
-	.mode		= 2,	/* VID1 = 1, VID0 = 0 */
-	.extclk		= 0,
-	.ramp_timing	= MAX8649_RAMP_32MV,
-	.regulator	= &max8649_init_data,
-};
-
-static struct regulator_consumer_supply brownstone_v_5vp_supplies[] = {
-	REGULATOR_SUPPLY("v_5vp", NULL),
-};
-
-static struct regulator_init_data brownstone_v_5vp_data = {
-	.constraints	= {
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(brownstone_v_5vp_supplies),
-	.consumer_supplies	= brownstone_v_5vp_supplies,
-};
-
-static struct fixed_voltage_config brownstone_v_5vp = {
-	.supply_name		= "v_5vp",
-	.microvolts		= 5000000,
-	.enabled_at_boot	= 1,
-	.init_data		= &brownstone_v_5vp_data,
-};
-
-static struct platform_device brownstone_v_5vp_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 1,
-	.dev = {
-		.platform_data = &brownstone_v_5vp,
-	},
-};
-
-static struct gpiod_lookup_table brownstone_v_5vp_gpiod_table = {
-	.dev_id = "reg-fixed-voltage.1", /* .id set to 1 above */
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_5V_ENABLE,
-			    NULL, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct max8925_platform_data brownstone_max8925_info = {
-	.irq_base		= MMP_NR_IRQS,
-};
-
-static struct i2c_board_info brownstone_twsi1_info[] = {
-	[0] = {
-		.type		= "max8649",
-		.addr		= 0x60,
-		.platform_data	= &brownstone_max8649_info,
-	},
-	[1] = {
-		.type		= "max8925",
-		.addr		= 0x3c,
-		.irq		= IRQ_MMP2_PMIC,
-		.platform_data	= &brownstone_max8925_info,
-	},
-};
-
-static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = {
-	.clk_delay_cycles = 0x1f,
-};
-
-static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc2 = {
-	.clk_delay_cycles = 0x1f,
-	.flags = PXA_FLAG_CARD_PERMANENT
-		| PXA_FLAG_SD_8_BIT_CAPABLE_SLOT,
-};
-
-static struct sram_platdata mmp2_asram_platdata = {
-	.pool_name	= "asram",
-	.granularity	= SRAM_GRANULARITY,
-};
-
-static struct sram_platdata mmp2_isram_platdata = {
-	.pool_name	= "isram",
-	.granularity	= SRAM_GRANULARITY,
-};
-
-static void __init brownstone_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(brownstone_pin_config));
-
-	/* on-chip devices */
-	mmp2_add_uart(1);
-	mmp2_add_uart(3);
-	platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_device_register(&mmp2_device_gpio);
-	mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(brownstone_twsi1_info));
-	mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
-	mmp2_add_sdhost(2, &mmp2_sdh_platdata_mmc2); /* eMMC */
-	mmp2_add_asram(&mmp2_asram_platdata);
-	mmp2_add_isram(&mmp2_isram_platdata);
-
-	/* enable 5v regulator */
-	gpiod_add_lookup_table(&brownstone_v_5vp_gpiod_table);
-	platform_device_register(&brownstone_v_5vp_device);
-}
-
-MACHINE_START(BROWNSTONE, "Brownstone Development Platform")
-	/* Maintainer: Haojian Zhuang <haojian.zhuang@marvell.com> */
-	.map_io		= mmp_map_io,
-	.nr_irqs	= BROWNSTONE_NR_IRQS,
-	.init_irq	= mmp2_init_irq,
-	.init_time	= mmp2_timer_init,
-	.init_machine	= brownstone_init,
-	.restart	= mmp_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c
index e94349d4726c..b3c1a248db31 100644
--- a/arch/arm/mach-mmp/common.c
+++ b/arch/arm/mach-mmp/common.c
@@ -58,8 +58,3 @@ void __init mmp2_map_io(void)
 	mmp_map_io();
 	iotable_init(mmp2_io_desc, ARRAY_SIZE(mmp2_io_desc));
 }
-
-void mmp_restart(enum reboot_mode mode, const char *cmd)
-{
-	soft_restart(0);
-}
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
index ed56b3f15b45..e18f05d5d68d 100644
--- a/arch/arm/mach-mmp/common.h
+++ b/arch/arm/mach-mmp/common.h
@@ -1,9 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 #include <linux/reboot.h>
-#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
 
 extern void mmp_timer_init(int irq, unsigned long rate);
 
 extern void __init mmp_map_io(void);
 extern void __init mmp2_map_io(void);
-extern void mmp_restart(enum reboot_mode, const char *);
diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c
deleted file mode 100644
index 9968239d8041..000000000000
--- a/arch/arm/mach-mmp/devices.c
+++ /dev/null
@@ -1,359 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-mmp/devices.c
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-
-#include <asm/irq.h>
-#include "irqs.h"
-#include "devices.h"
-#include <linux/soc/mmp/cputype.h>
-#include "regs-usb.h"
-
-int __init mmp_register_device(struct mmp_device_desc *desc,
-				void *data, size_t size)
-{
-	struct platform_device *pdev;
-	struct resource res[2 + MAX_RESOURCE_DMA];
-	int i, ret = 0, nres = 0;
-
-	pdev = platform_device_alloc(desc->drv_name, desc->id);
-	if (pdev == NULL)
-		return -ENOMEM;
-
-	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
-
-	memset(res, 0, sizeof(res));
-
-	if (desc->start != -1ul && desc->size > 0) {
-		res[nres].start	= desc->start;
-		res[nres].end	= desc->start + desc->size - 1;
-		res[nres].flags	= IORESOURCE_MEM;
-		nres++;
-	}
-
-	if (desc->irq != NO_IRQ) {
-		res[nres].start	= desc->irq;
-		res[nres].end	= desc->irq;
-		res[nres].flags	= IORESOURCE_IRQ;
-		nres++;
-	}
-
-	for (i = 0; i < MAX_RESOURCE_DMA; i++, nres++) {
-		if (desc->dma[i] == 0)
-			break;
-
-		res[nres].start	= desc->dma[i];
-		res[nres].end	= desc->dma[i];
-		res[nres].flags	= IORESOURCE_DMA;
-	}
-
-	ret = platform_device_add_resources(pdev, res, nres);
-	if (ret) {
-		platform_device_put(pdev);
-		return ret;
-	}
-
-	if (data && size) {
-		ret = platform_device_add_data(pdev, data, size);
-		if (ret) {
-			platform_device_put(pdev);
-			return ret;
-		}
-	}
-
-	return platform_device_add(pdev);
-}
-
-#if IS_ENABLED(CONFIG_USB) || IS_ENABLED(CONFIG_USB_GADGET)
-#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV)
-#if IS_ENABLED(CONFIG_CPU_PXA910) || IS_ENABLED(CONFIG_CPU_PXA168)
-
-/*****************************************************************************
- * The registers read/write routines
- *****************************************************************************/
-
-static unsigned int u2o_get(void __iomem *base, unsigned int offset)
-{
-	return readl_relaxed(base + offset);
-}
-
-static void u2o_set(void __iomem *base, unsigned int offset,
-		unsigned int value)
-{
-	u32 reg;
-
-	reg = readl_relaxed(base + offset);
-	reg |= value;
-	writel_relaxed(reg, base + offset);
-	readl_relaxed(base + offset);
-}
-
-static void u2o_clear(void __iomem *base, unsigned int offset,
-		unsigned int value)
-{
-	u32 reg;
-
-	reg = readl_relaxed(base + offset);
-	reg &= ~value;
-	writel_relaxed(reg, base + offset);
-	readl_relaxed(base + offset);
-}
-
-static void u2o_write(void __iomem *base, unsigned int offset,
-		unsigned int value)
-{
-	writel_relaxed(value, base + offset);
-	readl_relaxed(base + offset);
-}
-
-
-static DEFINE_MUTEX(phy_lock);
-static int phy_init_cnt;
-
-static int usb_phy_init_internal(void __iomem *base)
-{
-	int loops;
-
-	pr_info("Init usb phy!!!\n");
-
-	/* Initialize the USB PHY power */
-	if (cpu_is_pxa910()) {
-		u2o_set(base, UTMI_CTRL, (1<<UTMI_CTRL_INPKT_DELAY_SOF_SHIFT)
-			| (1<<UTMI_CTRL_PU_REF_SHIFT));
-	}
-
-	u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
-	u2o_set(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
-
-	/* UTMI_PLL settings */
-	u2o_clear(base, UTMI_PLL, UTMI_PLL_PLLVDD18_MASK
-		| UTMI_PLL_PLLVDD12_MASK | UTMI_PLL_PLLCALI12_MASK
-		| UTMI_PLL_FBDIV_MASK | UTMI_PLL_REFDIV_MASK
-		| UTMI_PLL_ICP_MASK | UTMI_PLL_KVCO_MASK);
-
-	u2o_set(base, UTMI_PLL, 0xee<<UTMI_PLL_FBDIV_SHIFT
-		| 0xb<<UTMI_PLL_REFDIV_SHIFT | 3<<UTMI_PLL_PLLVDD18_SHIFT
-		| 3<<UTMI_PLL_PLLVDD12_SHIFT | 3<<UTMI_PLL_PLLCALI12_SHIFT
-		| 1<<UTMI_PLL_ICP_SHIFT | 3<<UTMI_PLL_KVCO_SHIFT);
-
-	/* UTMI_TX */
-	u2o_clear(base, UTMI_TX, UTMI_TX_REG_EXT_FS_RCAL_EN_MASK
-		| UTMI_TX_TXVDD12_MASK | UTMI_TX_CK60_PHSEL_MASK
-		| UTMI_TX_IMPCAL_VTH_MASK | UTMI_TX_REG_EXT_FS_RCAL_MASK
-		| UTMI_TX_AMP_MASK);
-	u2o_set(base, UTMI_TX, 3<<UTMI_TX_TXVDD12_SHIFT
-		| 4<<UTMI_TX_CK60_PHSEL_SHIFT | 4<<UTMI_TX_IMPCAL_VTH_SHIFT
-		| 8<<UTMI_TX_REG_EXT_FS_RCAL_SHIFT | 3<<UTMI_TX_AMP_SHIFT);
-
-	/* UTMI_RX */
-	u2o_clear(base, UTMI_RX, UTMI_RX_SQ_THRESH_MASK
-		| UTMI_REG_SQ_LENGTH_MASK);
-	u2o_set(base, UTMI_RX, 7<<UTMI_RX_SQ_THRESH_SHIFT
-		| 2<<UTMI_REG_SQ_LENGTH_SHIFT);
-
-	/* UTMI_IVREF */
-	if (cpu_is_pxa168())
-		/* fixing Microsoft Altair board interface with NEC hub issue -
-		 * Set UTMI_IVREF from 0x4a3 to 0x4bf */
-		u2o_write(base, UTMI_IVREF, 0x4bf);
-
-	/* toggle VCOCAL_START bit of UTMI_PLL */
-	udelay(200);
-	u2o_set(base, UTMI_PLL, VCOCAL_START);
-	udelay(40);
-	u2o_clear(base, UTMI_PLL, VCOCAL_START);
-
-	/* toggle REG_RCAL_START bit of UTMI_TX */
-	udelay(400);
-	u2o_set(base, UTMI_TX, REG_RCAL_START);
-	udelay(40);
-	u2o_clear(base, UTMI_TX, REG_RCAL_START);
-	udelay(400);
-
-	/* Make sure PHY PLL is ready */
-	loops = 0;
-	while ((u2o_get(base, UTMI_PLL) & PLL_READY) == 0) {
-		mdelay(1);
-		loops++;
-		if (loops > 100) {
-			printk(KERN_WARNING "calibrate timeout, UTMI_PLL %x\n",
-				u2o_get(base, UTMI_PLL));
-			break;
-		}
-	}
-
-	if (cpu_is_pxa168()) {
-		u2o_set(base, UTMI_RESERVE, 1 << 5);
-		/* Turn on UTMI PHY OTG extension */
-		u2o_write(base, UTMI_OTG_ADDON, 1);
-	}
-
-	return 0;
-}
-
-static int usb_phy_deinit_internal(void __iomem *base)
-{
-	pr_info("Deinit usb phy!!!\n");
-
-	if (cpu_is_pxa168())
-		u2o_clear(base, UTMI_OTG_ADDON, UTMI_OTG_ADDON_OTG_ON);
-
-	u2o_clear(base, UTMI_CTRL, UTMI_CTRL_RXBUF_PDWN);
-	u2o_clear(base, UTMI_CTRL, UTMI_CTRL_TXBUF_PDWN);
-	u2o_clear(base, UTMI_CTRL, UTMI_CTRL_USB_CLK_EN);
-	u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PWR_UP_SHIFT);
-	u2o_clear(base, UTMI_CTRL, 1<<UTMI_CTRL_PLL_PWR_UP_SHIFT);
-
-	return 0;
-}
-
-int pxa_usb_phy_init(void __iomem *phy_reg)
-{
-	mutex_lock(&phy_lock);
-	if (phy_init_cnt++ == 0)
-		usb_phy_init_internal(phy_reg);
-	mutex_unlock(&phy_lock);
-	return 0;
-}
-
-void pxa_usb_phy_deinit(void __iomem *phy_reg)
-{
-	WARN_ON(phy_init_cnt == 0);
-
-	mutex_lock(&phy_lock);
-	if (--phy_init_cnt == 0)
-		usb_phy_deinit_internal(phy_reg);
-	mutex_unlock(&phy_lock);
-}
-#endif
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_USB_SUPPORT)
-static u64 __maybe_unused usb_dma_mask = ~(u32)0;
-
-#if IS_ENABLED(CONFIG_PHY_PXA_USB)
-static struct resource pxa168_usb_phy_resources[] = {
-	[0] = {
-		.start	= PXA168_U2O_PHYBASE,
-		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device pxa168_device_usb_phy = {
-	.name		= "pxa-usb-phy",
-	.id		= -1,
-	.resource	= pxa168_usb_phy_resources,
-	.num_resources	= ARRAY_SIZE(pxa168_usb_phy_resources),
-	.dev		=  {
-		.dma_mask	= &usb_dma_mask,
-		.coherent_dma_mask = 0xffffffff,
-	}
-};
-#endif /* CONFIG_PHY_PXA_USB */
-
-#if IS_ENABLED(CONFIG_USB_MV_UDC)
-static struct resource pxa168_u2o_resources[] = {
-	/* regbase */
-	[0] = {
-		.start	= PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
-		.end	= PXA168_U2O_REGBASE + USB_REG_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "capregs",
-	},
-	/* phybase */
-	[1] = {
-		.start	= PXA168_U2O_PHYBASE,
-		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "phyregs",
-	},
-	[2] = {
-		.start	= IRQ_PXA168_USB1,
-		.end	= IRQ_PXA168_USB1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa168_device_u2o = {
-	.name		= "mv-udc",
-	.id		= -1,
-	.resource	= pxa168_u2o_resources,
-	.num_resources	= ARRAY_SIZE(pxa168_u2o_resources),
-	.dev		=  {
-		.dma_mask	= &usb_dma_mask,
-		.coherent_dma_mask = 0xffffffff,
-	}
-};
-#endif /* CONFIG_USB_MV_UDC */
-
-#if IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
-static struct resource pxa168_u2oehci_resources[] = {
-	[0] = {
-		.start	= PXA168_U2O_REGBASE,
-		.end	= PXA168_U2O_REGBASE + USB_REG_RANGE,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_PXA168_USB1,
-		.end	= IRQ_PXA168_USB1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa168_device_u2oehci = {
-	.name		= "pxa-u2oehci",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &usb_dma_mask,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-
-	.num_resources	= ARRAY_SIZE(pxa168_u2oehci_resources),
-	.resource	= pxa168_u2oehci_resources,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_USB_MV_OTG)
-static struct resource pxa168_u2ootg_resources[] = {
-	/* regbase */
-	[0] = {
-		.start	= PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
-		.end	= PXA168_U2O_REGBASE + USB_REG_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "capregs",
-	},
-	/* phybase */
-	[1] = {
-		.start	= PXA168_U2O_PHYBASE,
-		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "phyregs",
-	},
-	[2] = {
-		.start	= IRQ_PXA168_USB1,
-		.end	= IRQ_PXA168_USB1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa168_device_u2ootg = {
-	.name		= "mv-otg",
-	.id		= -1,
-	.dev  = {
-		.dma_mask          = &usb_dma_mask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-
-	.num_resources	= ARRAY_SIZE(pxa168_u2ootg_resources),
-	.resource      = pxa168_u2ootg_resources,
-};
-#endif /* CONFIG_USB_MV_OTG */
-
-#endif
diff --git a/arch/arm/mach-mmp/devices.h b/arch/arm/mach-mmp/devices.h
deleted file mode 100644
index d4920ebfebc5..000000000000
--- a/arch/arm/mach-mmp/devices.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MACH_DEVICE_H
-#define __MACH_DEVICE_H
-
-#include <linux/types.h>
-
-#define MAX_RESOURCE_DMA	2
-
-/* structure for describing the on-chip devices */
-struct mmp_device_desc {
-	const char	*dev_name;
-	const char	*drv_name;
-	int		id;
-	int		irq;
-	unsigned long	start;
-	unsigned long	size;
-	int		dma[MAX_RESOURCE_DMA];
-};
-
-#define PXA168_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...)	\
-struct mmp_device_desc pxa168_device_##_name __initdata = {		\
-	.dev_name	= "pxa168-" #_name,				\
-	.drv_name	= _drv,						\
-	.id		= _id,						\
-	.irq		= IRQ_PXA168_##_irq,				\
-	.start		= _start,					\
-	.size		= _size,					\
-	.dma		= { _dma },					\
-};
-
-#define PXA910_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...)	\
-struct mmp_device_desc pxa910_device_##_name __initdata = {		\
-	.dev_name	= "pxa910-" #_name,				\
-	.drv_name	= _drv,						\
-	.id		= _id,						\
-	.irq		= IRQ_PXA910_##_irq,				\
-	.start		= _start,					\
-	.size		= _size,					\
-	.dma		= { _dma },					\
-};
-
-#define MMP2_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...)	\
-struct mmp_device_desc mmp2_device_##_name __initdata = {		\
-	.dev_name	= "mmp2-" #_name,				\
-	.drv_name	= _drv,						\
-	.id		= _id,						\
-	.irq		= IRQ_MMP2_##_irq,				\
-	.start		= _start,					\
-	.size		= _size,					\
-	.dma		= { _dma },					\
-}
-
-extern int mmp_register_device(struct mmp_device_desc *, void *, size_t);
-extern int pxa_usb_phy_init(void __iomem *phy_reg);
-extern void pxa_usb_phy_deinit(void __iomem *phy_reg);
-
-#endif /* __MACH_DEVICE_H */
diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c
deleted file mode 100644
index 9a7054368e55..000000000000
--- a/arch/arm/mach-mmp/flint.c
+++ /dev/null
@@ -1,131 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/flint.c
- *
- *  Support for the Marvell Flint Development Platform.
- *
- *  Copyright (C) 2009 Marvell International Ltd.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/smc91x.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/interrupt.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "addr-map.h"
-#include "mfp-mmp2.h"
-#include "mmp2.h"
-#include "irqs.h"
-
-#include "common.h"
-
-#define FLINT_NR_IRQS	(MMP_NR_IRQS + 48)
-
-static unsigned long flint_pin_config[] __initdata = {
-	/* UART1 */
-	GPIO45_UART1_RXD,
-	GPIO46_UART1_TXD,
-
-	/* UART2 */
-	GPIO47_UART2_RXD,
-	GPIO48_UART2_TXD,
-
-	/* SMC */
-	GPIO151_SMC_SCLK,
-	GPIO145_SMC_nCS0,
-	GPIO146_SMC_nCS1,
-	GPIO152_SMC_BE0,
-	GPIO153_SMC_BE1,
-	GPIO154_SMC_IRQ,
-	GPIO113_SMC_RDY,
-
-	/*Ethernet*/
-	GPIO155_GPIO,
-
-	/* DFI */
-	GPIO168_DFI_D0,
-	GPIO167_DFI_D1,
-	GPIO166_DFI_D2,
-	GPIO165_DFI_D3,
-	GPIO107_DFI_D4,
-	GPIO106_DFI_D5,
-	GPIO105_DFI_D6,
-	GPIO104_DFI_D7,
-	GPIO111_DFI_D8,
-	GPIO164_DFI_D9,
-	GPIO163_DFI_D10,
-	GPIO162_DFI_D11,
-	GPIO161_DFI_D12,
-	GPIO110_DFI_D13,
-	GPIO109_DFI_D14,
-	GPIO108_DFI_D15,
-	GPIO143_ND_nCS0,
-	GPIO144_ND_nCS1,
-	GPIO147_ND_nWE,
-	GPIO148_ND_nRE,
-	GPIO150_ND_ALE,
-	GPIO149_ND_CLE,
-	GPIO112_ND_RDY0,
-	GPIO160_ND_RDY1,
-};
-
-static struct pxa_gpio_platform_data mmp2_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static struct smc91x_platdata flint_smc91x_info = {
-	.flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start  = SMC_CS1_PHYS_BASE + 0x300,
-		.end    = SMC_CS1_PHYS_BASE + 0xfffff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = MMP_GPIO_TO_IRQ(155),
-		.end    = MMP_GPIO_TO_IRQ(155),
-		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct platform_device smc91x_device = {
-	.name           = "smc91x",
-	.id             = 0,
-	.dev            = {
-		.platform_data = &flint_smc91x_info,
-	},
-	.num_resources  = ARRAY_SIZE(smc91x_resources),
-	.resource       = smc91x_resources,
-};
-
-static void __init flint_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(flint_pin_config));
-
-	/* on-chip devices */
-	mmp2_add_uart(1);
-	mmp2_add_uart(2);
-	platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_device_register(&mmp2_device_gpio);
-
-	/* off-chip devices */
-	platform_device_register(&smc91x_device);
-}
-
-MACHINE_START(FLINT, "Flint Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= FLINT_NR_IRQS,
-	.init_irq       = mmp2_init_irq,
-	.init_time	= mmp2_timer_init,
-	.init_machine   = flint_init,
-	.restart	= mmp_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
deleted file mode 100644
index 5888b71944b8..000000000000
--- a/arch/arm/mach-mmp/gplugd.c
+++ /dev/null
@@ -1,206 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/gplugd.c
- *
- *  Support for the Marvell PXA168-based GuruPlug Display (gplugD) Platform.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include "irqs.h"
-#include "pxa168.h"
-#include "mfp-pxa168.h"
-
-#include "common.h"
-
-static unsigned long gplugd_pin_config[] __initdata = {
-	/* UART3 */
-	GPIO8_UART3_TXD,
-	GPIO9_UART3_RXD,
-	GPIO1O_UART3_CTS,
-	GPIO11_UART3_RTS,
-
-	/* USB OTG PEN */
-	GPIO18_GPIO,
-
-	/* MMC2 */
-	GPIO28_MMC2_CMD,
-	GPIO29_MMC2_CLK,
-	GPIO30_MMC2_DAT0,
-	GPIO31_MMC2_DAT1,
-	GPIO32_MMC2_DAT2,
-	GPIO33_MMC2_DAT3,
-
-	/* LCD & HDMI clock selection GPIO: 0: 74.176MHz, 1: 74.25 MHz */
-	GPIO35_GPIO,
-	GPIO36_GPIO, /* CEC Interrupt */
-
-	/* MMC1 */
-	GPIO43_MMC1_CLK,
-	GPIO49_MMC1_CMD,
-	GPIO41_MMC1_DAT0,
-	GPIO40_MMC1_DAT1,
-	GPIO52_MMC1_DAT2,
-	GPIO51_MMC1_DAT3,
-	GPIO53_MMC1_CD,
-
-	/* LCD */
-	GPIO56_LCD_FCLK_RD,
-	GPIO57_LCD_LCLK_A0,
-	GPIO58_LCD_PCLK_WR,
-	GPIO59_LCD_DENA_BIAS,
-	GPIO60_LCD_DD0,
-	GPIO61_LCD_DD1,
-	GPIO62_LCD_DD2,
-	GPIO63_LCD_DD3,
-	GPIO64_LCD_DD4,
-	GPIO65_LCD_DD5,
-	GPIO66_LCD_DD6,
-	GPIO67_LCD_DD7,
-	GPIO68_LCD_DD8,
-	GPIO69_LCD_DD9,
-	GPIO70_LCD_DD10,
-	GPIO71_LCD_DD11,
-	GPIO72_LCD_DD12,
-	GPIO73_LCD_DD13,
-	GPIO74_LCD_DD14,
-	GPIO75_LCD_DD15,
-	GPIO76_LCD_DD16,
-	GPIO77_LCD_DD17,
-	GPIO78_LCD_DD18,
-	GPIO79_LCD_DD19,
-	GPIO80_LCD_DD20,
-	GPIO81_LCD_DD21,
-	GPIO82_LCD_DD22,
-	GPIO83_LCD_DD23,
-
-	/* GPIO */
-	GPIO84_GPIO,
-	GPIO85_GPIO,
-
-	/* Fast-Ethernet*/
-	GPIO86_TX_CLK,
-	GPIO87_TX_EN,
-	GPIO88_TX_DQ3,
-	GPIO89_TX_DQ2,
-	GPIO90_TX_DQ1,
-	GPIO91_TX_DQ0,
-	GPIO92_MII_CRS,
-	GPIO93_MII_COL,
-	GPIO94_RX_CLK,
-	GPIO95_RX_ER,
-	GPIO96_RX_DQ3,
-	GPIO97_RX_DQ2,
-	GPIO98_RX_DQ1,
-	GPIO99_RX_DQ0,
-	GPIO100_MII_MDC,
-	GPIO101_MII_MDIO,
-	GPIO103_RX_DV,
-	GPIO104_GPIO,     /* Reset PHY */
-
-	/* RTC interrupt */
-	GPIO102_GPIO,
-
-	/* I2C */
-	GPIO105_CI2C_SDA,
-	GPIO106_CI2C_SCL,
-
-	/* SPI NOR Flash on SSP2 */
-	GPIO107_SSP2_RXD,
-	GPIO108_SSP2_TXD,
-	GPIO110_GPIO,     /* SPI_CSn */
-	GPIO111_SSP2_CLK,
-
-	/* Select JTAG */
-	GPIO109_GPIO,
-
-	/* I2S */
-	GPIO114_I2S_FRM,
-	GPIO115_I2S_BCLK,
-	GPIO116_I2S_TXD
-};
-
-static struct pxa_gpio_platform_data pxa168_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static struct i2c_board_info gplugd_i2c_board_info[] = {
-	{
-		.type = "isl1208",
-		.addr = 0x6F,
-	}
-};
-
-/* Bring PHY out of reset by setting GPIO 104 */
-static int gplugd_eth_init(void)
-{
-	if (unlikely(gpio_request(104, "ETH_RESET_N"))) {
-		printk(KERN_ERR "Can't get hold of GPIO 104 to bring Ethernet "
-				"PHY out of reset\n");
-		return -EIO;
-	}
-
-	gpio_direction_output(104, 1);
-	gpio_free(104);
-	return 0;
-}
-
-struct pxa168_eth_platform_data gplugd_eth_platform_data = {
-	.port_number = 0,
-	.phy_addr    = 0,
-	.speed       = 0, /* Autonagotiation */
-	.intf        = PHY_INTERFACE_MODE_RMII,
-	.init        = gplugd_eth_init,
-};
-
-static void __init select_disp_freq(void)
-{
-	/* set GPIO 35 & clear GPIO 85 to set LCD External Clock to 74.25 MHz */
-	if (unlikely(gpio_request(35, "DISP_FREQ_SEL"))) {
-		printk(KERN_ERR "Can't get hold of GPIO 35 to select display "
-				"frequency\n");
-	} else {
-		gpio_direction_output(35, 1);
-		gpio_free(35);
-	}
-
-	if (unlikely(gpio_request(85, "DISP_FREQ_SEL_2"))) {
-		printk(KERN_ERR "Can't get hold of GPIO 85 to select display "
-				"frequency\n");
-	} else {
-		gpio_direction_output(85, 0);
-		gpio_free(85);
-	}
-}
-
-static void __init gplugd_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(gplugd_pin_config));
-
-	select_disp_freq();
-
-	/* on-chip devices */
-	pxa168_add_uart(3);
-	pxa168_add_ssp(1);
-	pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info));
-	platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_device_register(&pxa168_device_gpio);
-
-	pxa168_add_eth(&gplugd_eth_platform_data);
-}
-
-MACHINE_START(GPLUGD, "PXA168-based GuruPlug Display (gplugD) Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= MMP_NR_IRQS,
-	.init_irq       = pxa168_init_irq,
-	.init_time	= pxa168_timer_init,
-	.init_machine   = gplugd_init,
-	.restart	= pxa168_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/irqs.h b/arch/arm/mach-mmp/irqs.h
deleted file mode 100644
index 5acc4d532a43..000000000000
--- a/arch/arm/mach-mmp/irqs.h
+++ /dev/null
@@ -1,240 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_IRQS_H
-#define __ASM_MACH_IRQS_H
-
-/*
- * Interrupt numbers for PXA168
- */
-#define IRQ_PXA168_NONE			(-1)
-#define IRQ_PXA168_SSP4			0
-#define IRQ_PXA168_SSP3			1
-#define IRQ_PXA168_SSP2			2
-#define IRQ_PXA168_SSP1			3
-#define IRQ_PXA168_PMIC_INT		4
-#define IRQ_PXA168_RTC_INT		5
-#define IRQ_PXA168_RTC_ALARM		6
-#define IRQ_PXA168_TWSI0		7
-#define IRQ_PXA168_GPU			8
-#define IRQ_PXA168_KEYPAD		9
-#define IRQ_PXA168_ONEWIRE		12
-#define IRQ_PXA168_TIMER1		13
-#define IRQ_PXA168_TIMER2		14
-#define IRQ_PXA168_TIMER3		15
-#define IRQ_PXA168_CMU			16
-#define IRQ_PXA168_SSP5			17
-#define IRQ_PXA168_MSP_WAKEUP		19
-#define IRQ_PXA168_CF_WAKEUP		20
-#define IRQ_PXA168_XD_WAKEUP		21
-#define IRQ_PXA168_MFU			22
-#define IRQ_PXA168_MSP			23
-#define IRQ_PXA168_CF			24
-#define IRQ_PXA168_XD			25
-#define IRQ_PXA168_DDR_INT		26
-#define IRQ_PXA168_UART1		27
-#define IRQ_PXA168_UART2		28
-#define IRQ_PXA168_UART3		29
-#define IRQ_PXA168_WDT			35
-#define IRQ_PXA168_MAIN_PMU		36
-#define IRQ_PXA168_FRQ_CHANGE		38
-#define IRQ_PXA168_SDH1			39
-#define IRQ_PXA168_SDH2			40
-#define IRQ_PXA168_LCD			41
-#define IRQ_PXA168_CI			42
-#define IRQ_PXA168_USB1			44
-#define IRQ_PXA168_NAND			45
-#define IRQ_PXA168_HIFI_DMA		46
-#define IRQ_PXA168_DMA_INT0		47
-#define IRQ_PXA168_DMA_INT1		48
-#define IRQ_PXA168_GPIOX		49
-#define IRQ_PXA168_USB2			51
-#define IRQ_PXA168_AC97			57
-#define IRQ_PXA168_TWSI1		58
-#define IRQ_PXA168_AP_PMU		60
-#define IRQ_PXA168_SM_INT		63
-
-/*
- * Interrupt numbers for PXA910
- */
-#define IRQ_PXA910_NONE			(-1)
-#define IRQ_PXA910_AIRQ			0
-#define IRQ_PXA910_SSP3			1
-#define IRQ_PXA910_SSP2			2
-#define IRQ_PXA910_SSP1			3
-#define IRQ_PXA910_PMIC_INT		4
-#define IRQ_PXA910_RTC_INT		5
-#define IRQ_PXA910_RTC_ALARM		6
-#define IRQ_PXA910_TWSI0		7
-#define IRQ_PXA910_GPU			8
-#define IRQ_PXA910_KEYPAD		9
-#define IRQ_PXA910_ROTARY		10
-#define IRQ_PXA910_TRACKBALL		11
-#define IRQ_PXA910_ONEWIRE		12
-#define IRQ_PXA910_AP1_TIMER1		13
-#define IRQ_PXA910_AP1_TIMER2		14
-#define IRQ_PXA910_AP1_TIMER3		15
-#define IRQ_PXA910_IPC_AP0		16
-#define IRQ_PXA910_IPC_AP1		17
-#define IRQ_PXA910_IPC_AP2		18
-#define IRQ_PXA910_IPC_AP3		19
-#define IRQ_PXA910_IPC_AP4		20
-#define IRQ_PXA910_IPC_CP0		21
-#define IRQ_PXA910_IPC_CP1		22
-#define IRQ_PXA910_IPC_CP2		23
-#define IRQ_PXA910_IPC_CP3		24
-#define IRQ_PXA910_IPC_CP4		25
-#define IRQ_PXA910_L2_DDR		26
-#define IRQ_PXA910_UART2		27
-#define IRQ_PXA910_UART3		28
-#define IRQ_PXA910_AP2_TIMER1		29
-#define IRQ_PXA910_AP2_TIMER2		30
-#define IRQ_PXA910_CP2_TIMER1		31
-#define IRQ_PXA910_CP2_TIMER2		32
-#define IRQ_PXA910_CP2_TIMER3		33
-#define IRQ_PXA910_GSSP			34
-#define IRQ_PXA910_CP2_WDT		35
-#define IRQ_PXA910_MAIN_PMU		36
-#define IRQ_PXA910_CP_FREQ_CHG		37
-#define IRQ_PXA910_AP_FREQ_CHG		38
-#define IRQ_PXA910_MMC			39
-#define IRQ_PXA910_AEU			40
-#define IRQ_PXA910_LCD			41
-#define IRQ_PXA910_CCIC			42
-#define IRQ_PXA910_IRE			43
-#define IRQ_PXA910_USB1			44
-#define IRQ_PXA910_NAND			45
-#define IRQ_PXA910_HIFI_DMA		46
-#define IRQ_PXA910_DMA_INT0		47
-#define IRQ_PXA910_DMA_INT1		48
-#define IRQ_PXA910_AP_GPIO		49
-#define IRQ_PXA910_AP2_TIMER3		50
-#define IRQ_PXA910_USB2			51
-#define IRQ_PXA910_TWSI1		54
-#define IRQ_PXA910_CP_GPIO		55
-#define IRQ_PXA910_UART1		59	/* Slow UART */
-#define IRQ_PXA910_AP_PMU		60
-#define IRQ_PXA910_SM_INT		63	/* from PinMux */
-
-/*
- * Interrupt numbers for MMP2
- */
-#define IRQ_MMP2_NONE			(-1)
-#define IRQ_MMP2_SSP1			0
-#define IRQ_MMP2_SSP2			1
-#define IRQ_MMP2_SSPA1			2
-#define IRQ_MMP2_SSPA2			3
-#define IRQ_MMP2_PMIC_MUX		4	/* PMIC & Charger */
-#define IRQ_MMP2_RTC_MUX		5
-#define IRQ_MMP2_TWSI1			7
-#define IRQ_MMP2_GPU			8
-#define IRQ_MMP2_KEYPAD_MUX		9
-#define IRQ_MMP2_ROTARY			10
-#define IRQ_MMP2_TRACKBALL		11
-#define IRQ_MMP2_ONEWIRE		12
-#define IRQ_MMP2_TIMER1			13
-#define IRQ_MMP2_TIMER2			14
-#define IRQ_MMP2_TIMER3			15
-#define IRQ_MMP2_RIPC			16
-#define IRQ_MMP2_TWSI_MUX		17	/* TWSI2 ~ TWSI6 */
-#define IRQ_MMP2_HDMI			19
-#define IRQ_MMP2_SSP3			20
-#define IRQ_MMP2_SSP4			21
-#define IRQ_MMP2_USB_HS1		22
-#define IRQ_MMP2_USB_HS2		23
-#define IRQ_MMP2_UART3			24
-#define IRQ_MMP2_UART1			27
-#define IRQ_MMP2_UART2			28
-#define IRQ_MMP2_MIPI_DSI		29
-#define IRQ_MMP2_CI2			30
-#define IRQ_MMP2_PMU_TIMER1		31
-#define IRQ_MMP2_PMU_TIMER2		32
-#define IRQ_MMP2_PMU_TIMER3		33
-#define IRQ_MMP2_USB_FS			34
-#define IRQ_MMP2_MISC_MUX		35
-#define IRQ_MMP2_WDT1			36
-#define IRQ_MMP2_NAND_DMA		37
-#define IRQ_MMP2_USIM			38
-#define IRQ_MMP2_MMC			39
-#define IRQ_MMP2_WTM			40
-#define IRQ_MMP2_LCD			41
-#define IRQ_MMP2_CI			42
-#define IRQ_MMP2_IRE			43
-#define IRQ_MMP2_USB_OTG		44
-#define IRQ_MMP2_NAND			45
-#define IRQ_MMP2_UART4			46
-#define IRQ_MMP2_DMA_FIQ		47
-#define IRQ_MMP2_DMA_RIQ		48
-#define IRQ_MMP2_GPIO			49
-#define IRQ_MMP2_MIPI_HSI1_MUX		51
-#define IRQ_MMP2_MMC2			52
-#define IRQ_MMP2_MMC3			53
-#define IRQ_MMP2_MMC4			54
-#define IRQ_MMP2_MIPI_HSI0_MUX		55
-#define IRQ_MMP2_MSP			58
-#define IRQ_MMP2_MIPI_SLIM_DMA		59
-#define IRQ_MMP2_PJ4_FREQ_CHG		60
-#define IRQ_MMP2_MIPI_SLIM		62
-#define IRQ_MMP2_SM			63
-
-#define IRQ_MMP2_MUX_BASE		64
-
-/* secondary interrupt of INT #4 */
-#define IRQ_MMP2_PMIC_BASE		(IRQ_MMP2_MUX_BASE)
-#define IRQ_MMP2_CHARGER		(IRQ_MMP2_PMIC_BASE + 0)
-#define IRQ_MMP2_PMIC			(IRQ_MMP2_PMIC_BASE + 1)
-
-/* secondary interrupt of INT #5 */
-#define IRQ_MMP2_RTC_BASE		(IRQ_MMP2_PMIC_BASE + 2)
-#define IRQ_MMP2_RTC_ALARM		(IRQ_MMP2_RTC_BASE + 0)
-#define IRQ_MMP2_RTC			(IRQ_MMP2_RTC_BASE + 1)
-
-/* secondary interrupt of INT #9 */
-#define IRQ_MMP2_KEYPAD_BASE		(IRQ_MMP2_RTC_BASE + 2)
-#define IRQ_MMP2_KPC			(IRQ_MMP2_KEYPAD_BASE + 0)
-#define IRQ_MMP2_ROTORY			(IRQ_MMP2_KEYPAD_BASE + 1)
-#define IRQ_MMP2_TBALL			(IRQ_MMP2_KEYPAD_BASE + 2)
-
-/* secondary interrupt of INT #17 */
-#define IRQ_MMP2_TWSI_BASE		(IRQ_MMP2_KEYPAD_BASE + 3)
-#define IRQ_MMP2_TWSI2			(IRQ_MMP2_TWSI_BASE + 0)
-#define IRQ_MMP2_TWSI3			(IRQ_MMP2_TWSI_BASE + 1)
-#define IRQ_MMP2_TWSI4			(IRQ_MMP2_TWSI_BASE + 2)
-#define IRQ_MMP2_TWSI5			(IRQ_MMP2_TWSI_BASE + 3)
-#define IRQ_MMP2_TWSI6			(IRQ_MMP2_TWSI_BASE + 4)
-
-/* secondary interrupt of INT #35 */
-#define IRQ_MMP2_MISC_BASE		(IRQ_MMP2_TWSI_BASE + 5)
-#define IRQ_MMP2_PERF			(IRQ_MMP2_MISC_BASE + 0)
-#define IRQ_MMP2_L2_PA_ECC		(IRQ_MMP2_MISC_BASE + 1)
-#define IRQ_MMP2_L2_ECC			(IRQ_MMP2_MISC_BASE + 2)
-#define IRQ_MMP2_L2_UECC		(IRQ_MMP2_MISC_BASE + 3)
-#define IRQ_MMP2_DDR			(IRQ_MMP2_MISC_BASE + 4)
-#define IRQ_MMP2_FAB0_TIMEOUT		(IRQ_MMP2_MISC_BASE + 5)
-#define IRQ_MMP2_FAB1_TIMEOUT		(IRQ_MMP2_MISC_BASE + 6)
-#define IRQ_MMP2_FAB2_TIMEOUT		(IRQ_MMP2_MISC_BASE + 7)
-#define IRQ_MMP2_THERMAL		(IRQ_MMP2_MISC_BASE + 9)
-#define IRQ_MMP2_MAIN_PMU		(IRQ_MMP2_MISC_BASE + 10)
-#define IRQ_MMP2_WDT2			(IRQ_MMP2_MISC_BASE + 11)
-#define IRQ_MMP2_CORESIGHT		(IRQ_MMP2_MISC_BASE + 12)
-#define IRQ_MMP2_COMMTX			(IRQ_MMP2_MISC_BASE + 13)
-#define IRQ_MMP2_COMMRX			(IRQ_MMP2_MISC_BASE + 14)
-
-/* secondary interrupt of INT #51 */
-#define IRQ_MMP2_MIPI_HSI1_BASE		(IRQ_MMP2_MISC_BASE + 15)
-#define IRQ_MMP2_HSI1_CAWAKE		(IRQ_MMP2_MIPI_HSI1_BASE + 0)
-#define IRQ_MMP2_MIPI_HSI_INT1		(IRQ_MMP2_MIPI_HSI1_BASE + 1)
-
-/* secondary interrupt of INT #55 */
-#define IRQ_MMP2_MIPI_HSI0_BASE		(IRQ_MMP2_MIPI_HSI1_BASE + 2)
-#define IRQ_MMP2_HSI0_CAWAKE		(IRQ_MMP2_MIPI_HSI0_BASE + 0)
-#define IRQ_MMP2_MIPI_HSI_INT0		(IRQ_MMP2_MIPI_HSI0_BASE + 1)
-
-#define IRQ_MMP2_MUX_END		(IRQ_MMP2_MIPI_HSI0_BASE + 2)
-
-#define IRQ_GPIO_START			128
-#define MMP_NR_BUILTIN_GPIO		192
-#define MMP_GPIO_TO_IRQ(gpio)		(IRQ_GPIO_START + (gpio))
-
-#define IRQ_BOARD_START			(IRQ_GPIO_START + MMP_NR_BUILTIN_GPIO)
-#define MMP_NR_IRQS			IRQ_BOARD_START
-
-#endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
deleted file mode 100644
index 2578e176fd48..000000000000
--- a/arch/arm/mach-mmp/jasper.c
+++ /dev/null
@@ -1,185 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/jasper.c
- *
- *  Support for the Marvell Jasper Development Platform.
- *
- *  Copyright (C) 2009-2010 Marvell International Ltd.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/gpio-pxa.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/max8649.h>
-#include <linux/mfd/max8925.h>
-#include <linux/interrupt.h>
-
-#include "irqs.h"
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "addr-map.h"
-#include "mfp-mmp2.h"
-#include "mmp2.h"
-
-#include "common.h"
-
-#define JASPER_NR_IRQS		(MMP_NR_IRQS + 48)
-
-static unsigned long jasper_pin_config[] __initdata = {
-	/* UART1 */
-	GPIO29_UART1_RXD,
-	GPIO30_UART1_TXD,
-
-	/* UART3 */
-	GPIO51_UART3_RXD,
-	GPIO52_UART3_TXD,
-
-	/* DFI */
-	GPIO168_DFI_D0,
-	GPIO167_DFI_D1,
-	GPIO166_DFI_D2,
-	GPIO165_DFI_D3,
-	GPIO107_DFI_D4,
-	GPIO106_DFI_D5,
-	GPIO105_DFI_D6,
-	GPIO104_DFI_D7,
-	GPIO111_DFI_D8,
-	GPIO164_DFI_D9,
-	GPIO163_DFI_D10,
-	GPIO162_DFI_D11,
-	GPIO161_DFI_D12,
-	GPIO110_DFI_D13,
-	GPIO109_DFI_D14,
-	GPIO108_DFI_D15,
-	GPIO143_ND_nCS0,
-	GPIO144_ND_nCS1,
-	GPIO147_ND_nWE,
-	GPIO148_ND_nRE,
-	GPIO150_ND_ALE,
-	GPIO149_ND_CLE,
-	GPIO112_ND_RDY0,
-	GPIO160_ND_RDY1,
-
-	/* PMIC */
-	PMIC_PMIC_INT | MFP_LPM_EDGE_FALL,
-
-	/* MMC1 */
-	GPIO131_MMC1_DAT3,
-	GPIO132_MMC1_DAT2,
-	GPIO133_MMC1_DAT1,
-	GPIO134_MMC1_DAT0,
-	GPIO136_MMC1_CMD,
-	GPIO139_MMC1_CLK,
-	GPIO140_MMC1_CD,
-	GPIO141_MMC1_WP,
-
-	/* MMC2 */
-	GPIO37_MMC2_DAT3,
-	GPIO38_MMC2_DAT2,
-	GPIO39_MMC2_DAT1,
-	GPIO40_MMC2_DAT0,
-	GPIO41_MMC2_CMD,
-	GPIO42_MMC2_CLK,
-
-	/* MMC3 */
-	GPIO165_MMC3_DAT7,
-	GPIO162_MMC3_DAT6,
-	GPIO166_MMC3_DAT5,
-	GPIO163_MMC3_DAT4,
-	GPIO167_MMC3_DAT3,
-	GPIO164_MMC3_DAT2,
-	GPIO168_MMC3_DAT1,
-	GPIO111_MMC3_DAT0,
-	GPIO112_MMC3_CMD,
-	GPIO151_MMC3_CLK,
-};
-
-static struct pxa_gpio_platform_data mmp2_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static struct regulator_consumer_supply max8649_supply[] = {
-	REGULATOR_SUPPLY("vcc_core", NULL),
-};
-
-static struct regulator_init_data max8649_init_data = {
-	.constraints	= {
-		.name		= "vcc_core range",
-		.min_uV		= 1150000,
-		.max_uV		= 1280000,
-		.always_on	= 1,
-		.boot_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &max8649_supply[0],
-};
-
-static struct max8649_platform_data jasper_max8649_info = {
-	.mode		= 2,	/* VID1 = 1, VID0 = 0 */
-	.extclk		= 0,
-	.ramp_timing	= MAX8649_RAMP_32MV,
-	.regulator	= &max8649_init_data,
-};
-
-static struct max8925_backlight_pdata jasper_backlight_data = {
-	.dual_string	= 0,
-};
-
-static struct max8925_power_pdata jasper_power_data = {
-	.batt_detect		= 0,	/* can't detect battery by ID pin */
-	.topoff_threshold	= MAX8925_TOPOFF_THR_10PER,
-	.fast_charge		= MAX8925_FCHG_1000MA,
-};
-
-static struct max8925_platform_data jasper_max8925_info = {
-	.backlight		= &jasper_backlight_data,
-	.power			= &jasper_power_data,
-	.irq_base		= MMP_NR_IRQS,
-};
-
-static struct i2c_board_info jasper_twsi1_info[] = {
-	[0] = {
-		.type		= "max8649",
-		.addr		= 0x60,
-		.platform_data	= &jasper_max8649_info,
-	},
-	[1] = {
-		.type		= "max8925",
-		.addr		= 0x3c,
-		.irq		= IRQ_MMP2_PMIC,
-		.platform_data	= &jasper_max8925_info,
-	},
-};
-
-static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = {
-	.clk_delay_cycles = 0x1f,
-};
-
-static void __init jasper_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(jasper_pin_config));
-
-	/* on-chip devices */
-	mmp2_add_uart(1);
-	mmp2_add_uart(3);
-	mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(jasper_twsi1_info));
-	platform_device_add_data(&mmp2_device_gpio, &mmp2_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_device_register(&mmp2_device_gpio);
-	mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
-
-	regulator_has_full_constraints();
-}
-
-MACHINE_START(MARVELL_JASPER, "Jasper Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= JASPER_NR_IRQS,
-	.init_irq       = mmp2_init_irq,
-	.init_time	= mmp2_timer_init,
-	.init_machine   = jasper_init,
-	.restart	= mmp_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/mfp-mmp2.h b/arch/arm/mach-mmp/mfp-mmp2.h
deleted file mode 100644
index 1620222981e3..000000000000
--- a/arch/arm/mach-mmp/mfp-mmp2.h
+++ /dev/null
@@ -1,396 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_MFP_MMP2_H
-#define __ASM_MACH_MFP_MMP2_H
-
-#include "mfp.h"
-
-#define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
-#define MFP_DRIVE_SLOW		(0x2 << 13)
-#define MFP_DRIVE_MEDIUM	(0x4 << 13)
-#define MFP_DRIVE_FAST		(0x6 << 13)
-
-/* GPIO */
-#define GPIO0_GPIO	MFP_CFG(GPIO0, AF0)
-#define GPIO1_GPIO	MFP_CFG(GPIO1, AF0)
-#define GPIO2_GPIO	MFP_CFG(GPIO2, AF0)
-#define GPIO3_GPIO	MFP_CFG(GPIO3, AF0)
-#define GPIO4_GPIO	MFP_CFG(GPIO4, AF0)
-#define GPIO5_GPIO	MFP_CFG(GPIO5, AF0)
-#define GPIO6_GPIO	MFP_CFG(GPIO6, AF0)
-#define GPIO7_GPIO	MFP_CFG(GPIO7, AF0)
-#define GPIO8_GPIO	MFP_CFG(GPIO8, AF0)
-#define GPIO9_GPIO	MFP_CFG(GPIO9, AF0)
-#define GPIO10_GPIO	MFP_CFG(GPIO10, AF0)
-#define GPIO11_GPIO	MFP_CFG(GPIO11, AF0)
-#define GPIO12_GPIO	MFP_CFG(GPIO12, AF0)
-#define GPIO13_GPIO	MFP_CFG(GPIO13, AF0)
-#define GPIO14_GPIO	MFP_CFG(GPIO14, AF0)
-#define GPIO15_GPIO	MFP_CFG(GPIO15, AF0)
-#define GPIO16_GPIO	MFP_CFG(GPIO16, AF0)
-#define GPIO17_GPIO	MFP_CFG(GPIO17, AF0)
-#define GPIO18_GPIO	MFP_CFG(GPIO18, AF0)
-#define GPIO19_GPIO	MFP_CFG(GPIO19, AF0)
-#define GPIO20_GPIO	MFP_CFG(GPIO20, AF0)
-#define GPIO21_GPIO	MFP_CFG(GPIO21, AF0)
-#define GPIO22_GPIO	MFP_CFG(GPIO22, AF0)
-#define GPIO23_GPIO	MFP_CFG(GPIO23, AF0)
-#define GPIO24_GPIO	MFP_CFG(GPIO24, AF0)
-#define GPIO25_GPIO	MFP_CFG(GPIO25, AF0)
-#define GPIO26_GPIO	MFP_CFG(GPIO26, AF0)
-#define GPIO27_GPIO	MFP_CFG(GPIO27, AF0)
-#define GPIO28_GPIO	MFP_CFG(GPIO28, AF0)
-#define GPIO29_GPIO	MFP_CFG(GPIO29, AF0)
-#define GPIO30_GPIO	MFP_CFG(GPIO30, AF0)
-#define GPIO31_GPIO	MFP_CFG(GPIO31, AF0)
-#define GPIO32_GPIO	MFP_CFG(GPIO32, AF0)
-#define GPIO33_GPIO	MFP_CFG(GPIO33, AF0)
-#define GPIO34_GPIO	MFP_CFG(GPIO34, AF0)
-#define GPIO35_GPIO	MFP_CFG(GPIO35, AF0)
-#define GPIO36_GPIO	MFP_CFG(GPIO36, AF0)
-#define GPIO37_GPIO	MFP_CFG(GPIO37, AF0)
-#define GPIO38_GPIO	MFP_CFG(GPIO38, AF0)
-#define GPIO39_GPIO	MFP_CFG(GPIO39, AF0)
-#define GPIO40_GPIO	MFP_CFG(GPIO40, AF0)
-#define GPIO41_GPIO	MFP_CFG(GPIO41, AF0)
-#define GPIO42_GPIO	MFP_CFG(GPIO42, AF0)
-#define GPIO43_GPIO	MFP_CFG(GPIO43, AF0)
-#define GPIO44_GPIO	MFP_CFG(GPIO44, AF0)
-#define GPIO45_GPIO	MFP_CFG(GPIO45, AF0)
-#define GPIO46_GPIO	MFP_CFG(GPIO46, AF0)
-#define GPIO47_GPIO	MFP_CFG(GPIO47, AF0)
-#define GPIO48_GPIO	MFP_CFG(GPIO48, AF0)
-#define GPIO49_GPIO	MFP_CFG(GPIO49, AF0)
-#define GPIO50_GPIO	MFP_CFG(GPIO50, AF0)
-#define GPIO51_GPIO	MFP_CFG(GPIO51, AF0)
-#define GPIO52_GPIO	MFP_CFG(GPIO52, AF0)
-#define GPIO53_GPIO	MFP_CFG(GPIO53, AF0)
-#define GPIO54_GPIO	MFP_CFG(GPIO54, AF0)
-#define GPIO55_GPIO	MFP_CFG(GPIO55, AF0)
-#define GPIO56_GPIO	MFP_CFG(GPIO56, AF0)
-#define GPIO57_GPIO	MFP_CFG(GPIO57, AF0)
-#define GPIO58_GPIO	MFP_CFG(GPIO58, AF0)
-#define GPIO59_GPIO	MFP_CFG(GPIO59, AF0)
-#define GPIO60_GPIO	MFP_CFG(GPIO60, AF0)
-#define GPIO61_GPIO	MFP_CFG(GPIO61, AF0)
-#define GPIO62_GPIO	MFP_CFG(GPIO62, AF0)
-#define GPIO63_GPIO	MFP_CFG(GPIO63, AF0)
-#define GPIO64_GPIO	MFP_CFG(GPIO64, AF0)
-#define GPIO65_GPIO	MFP_CFG(GPIO65, AF0)
-#define GPIO66_GPIO	MFP_CFG(GPIO66, AF0)
-#define GPIO67_GPIO	MFP_CFG(GPIO67, AF0)
-#define GPIO68_GPIO	MFP_CFG(GPIO68, AF0)
-#define GPIO69_GPIO	MFP_CFG(GPIO69, AF0)
-#define GPIO70_GPIO	MFP_CFG(GPIO70, AF0)
-#define GPIO71_GPIO	MFP_CFG(GPIO71, AF0)
-#define GPIO72_GPIO	MFP_CFG(GPIO72, AF0)
-#define GPIO73_GPIO	MFP_CFG(GPIO73, AF0)
-#define GPIO74_GPIO	MFP_CFG(GPIO74, AF0)
-#define GPIO75_GPIO	MFP_CFG(GPIO75, AF0)
-#define GPIO76_GPIO	MFP_CFG(GPIO76, AF0)
-#define GPIO77_GPIO	MFP_CFG(GPIO77, AF0)
-#define GPIO78_GPIO	MFP_CFG(GPIO78, AF0)
-#define GPIO79_GPIO	MFP_CFG(GPIO79, AF0)
-#define GPIO80_GPIO	MFP_CFG(GPIO80, AF0)
-#define GPIO81_GPIO	MFP_CFG(GPIO81, AF0)
-#define GPIO82_GPIO	MFP_CFG(GPIO82, AF0)
-#define GPIO83_GPIO	MFP_CFG(GPIO83, AF0)
-#define GPIO84_GPIO	MFP_CFG(GPIO84, AF0)
-#define GPIO85_GPIO	MFP_CFG(GPIO85, AF0)
-#define GPIO86_GPIO	MFP_CFG(GPIO86, AF0)
-#define GPIO87_GPIO	MFP_CFG(GPIO87, AF0)
-#define GPIO88_GPIO	MFP_CFG(GPIO88, AF0)
-#define GPIO89_GPIO	MFP_CFG(GPIO89, AF0)
-#define GPIO90_GPIO	MFP_CFG(GPIO90, AF0)
-#define GPIO91_GPIO	MFP_CFG(GPIO91, AF0)
-#define GPIO92_GPIO	MFP_CFG(GPIO92, AF0)
-#define GPIO93_GPIO	MFP_CFG(GPIO93, AF0)
-#define GPIO94_GPIO	MFP_CFG(GPIO94, AF0)
-#define GPIO95_GPIO	MFP_CFG(GPIO95, AF0)
-#define GPIO96_GPIO	MFP_CFG(GPIO96, AF0)
-#define GPIO97_GPIO	MFP_CFG(GPIO97, AF0)
-#define GPIO98_GPIO	MFP_CFG(GPIO98, AF0)
-#define GPIO99_GPIO	MFP_CFG(GPIO99, AF0)
-#define GPIO100_GPIO	MFP_CFG(GPIO100, AF0)
-#define GPIO101_GPIO	MFP_CFG(GPIO101, AF0)
-#define GPIO102_GPIO	MFP_CFG(GPIO102, AF1)
-#define GPIO103_GPIO	MFP_CFG(GPIO103, AF1)
-#define GPIO104_GPIO	MFP_CFG(GPIO104, AF1)
-#define GPIO105_GPIO	MFP_CFG(GPIO105, AF1)
-#define GPIO106_GPIO	MFP_CFG(GPIO106, AF1)
-#define GPIO107_GPIO	MFP_CFG(GPIO107, AF1)
-#define GPIO108_GPIO	MFP_CFG(GPIO108, AF1)
-#define GPIO109_GPIO	MFP_CFG(GPIO109, AF1)
-#define GPIO110_GPIO	MFP_CFG(GPIO110, AF1)
-#define GPIO111_GPIO	MFP_CFG(GPIO111, AF1)
-#define GPIO112_GPIO	MFP_CFG(GPIO112, AF1)
-#define GPIO113_GPIO	MFP_CFG(GPIO113, AF1)
-#define GPIO114_GPIO	MFP_CFG(GPIO114, AF0)
-#define GPIO115_GPIO	MFP_CFG(GPIO115, AF0)
-#define GPIO116_GPIO	MFP_CFG(GPIO116, AF0)
-#define GPIO117_GPIO	MFP_CFG(GPIO117, AF0)
-#define GPIO118_GPIO	MFP_CFG(GPIO118, AF0)
-#define GPIO119_GPIO	MFP_CFG(GPIO119, AF0)
-#define GPIO120_GPIO	MFP_CFG(GPIO120, AF0)
-#define GPIO121_GPIO	MFP_CFG(GPIO121, AF0)
-#define GPIO122_GPIO	MFP_CFG(GPIO122, AF0)
-#define GPIO123_GPIO	MFP_CFG(GPIO123, AF0)
-#define GPIO124_GPIO	MFP_CFG(GPIO124, AF0)
-#define GPIO125_GPIO	MFP_CFG(GPIO125, AF0)
-#define GPIO126_GPIO	MFP_CFG(GPIO126, AF0)
-#define GPIO127_GPIO	MFP_CFG(GPIO127, AF0)
-#define GPIO128_GPIO	MFP_CFG(GPIO128, AF0)
-#define GPIO129_GPIO	MFP_CFG(GPIO129, AF0)
-#define GPIO130_GPIO	MFP_CFG(GPIO130, AF0)
-#define GPIO131_GPIO	MFP_CFG(GPIO131, AF0)
-#define GPIO132_GPIO	MFP_CFG(GPIO132, AF0)
-#define GPIO133_GPIO	MFP_CFG(GPIO133, AF0)
-#define GPIO134_GPIO	MFP_CFG(GPIO134, AF0)
-#define GPIO135_GPIO	MFP_CFG(GPIO135, AF0)
-#define GPIO136_GPIO	MFP_CFG(GPIO136, AF0)
-#define GPIO137_GPIO	MFP_CFG(GPIO137, AF0)
-#define GPIO138_GPIO	MFP_CFG(GPIO138, AF0)
-#define GPIO139_GPIO	MFP_CFG(GPIO139, AF0)
-#define GPIO140_GPIO	MFP_CFG(GPIO140, AF0)
-#define GPIO141_GPIO	MFP_CFG(GPIO141, AF0)
-#define GPIO142_GPIO	MFP_CFG(GPIO142, AF1)
-#define GPIO143_GPIO	MFP_CFG(GPIO143, AF1)
-#define GPIO144_GPIO	MFP_CFG(GPIO144, AF1)
-#define GPIO145_GPIO	MFP_CFG(GPIO145, AF1)
-#define GPIO146_GPIO	MFP_CFG(GPIO146, AF1)
-#define GPIO147_GPIO	MFP_CFG(GPIO147, AF1)
-#define GPIO148_GPIO	MFP_CFG(GPIO148, AF1)
-#define GPIO149_GPIO	MFP_CFG(GPIO149, AF1)
-#define GPIO150_GPIO	MFP_CFG(GPIO150, AF1)
-#define GPIO151_GPIO	MFP_CFG(GPIO151, AF1)
-#define GPIO152_GPIO	MFP_CFG(GPIO152, AF1)
-#define GPIO153_GPIO	MFP_CFG(GPIO153, AF1)
-#define GPIO154_GPIO	MFP_CFG(GPIO154, AF1)
-#define GPIO155_GPIO	MFP_CFG(GPIO155, AF1)
-#define GPIO156_GPIO	MFP_CFG(GPIO156, AF1)
-#define GPIO157_GPIO	MFP_CFG(GPIO157, AF1)
-#define GPIO158_GPIO	MFP_CFG(GPIO158, AF1)
-#define GPIO159_GPIO	MFP_CFG(GPIO159, AF1)
-#define GPIO160_GPIO	MFP_CFG(GPIO160, AF1)
-#define GPIO161_GPIO	MFP_CFG(GPIO161, AF1)
-#define GPIO162_GPIO	MFP_CFG(GPIO162, AF1)
-#define GPIO163_GPIO	MFP_CFG(GPIO163, AF1)
-#define GPIO164_GPIO	MFP_CFG(GPIO164, AF1)
-#define GPIO165_GPIO	MFP_CFG(GPIO165, AF1)
-#define GPIO166_GPIO	MFP_CFG(GPIO166, AF1)
-#define GPIO167_GPIO	MFP_CFG(GPIO167, AF1)
-#define GPIO168_GPIO	MFP_CFG(GPIO168, AF1)
-
-/* DFI */
-#define GPIO108_DFI_D15		MFP_CFG(GPIO108, AF0)
-#define GPIO109_DFI_D14		MFP_CFG(GPIO109, AF0)
-#define GPIO110_DFI_D13		MFP_CFG(GPIO110, AF0)
-#define GPIO161_DFI_D12		MFP_CFG(GPIO161, AF0)
-#define GPIO162_DFI_D11		MFP_CFG(GPIO162, AF0)
-#define GPIO163_DFI_D10		MFP_CFG(GPIO163, AF0)
-#define GPIO164_DFI_D9		MFP_CFG(GPIO164, AF0)
-#define GPIO111_DFI_D8		MFP_CFG(GPIO111, AF0)
-#define GPIO104_DFI_D7		MFP_CFG(GPIO104, AF0)
-#define GPIO105_DFI_D6		MFP_CFG(GPIO105, AF0)
-#define GPIO106_DFI_D5		MFP_CFG(GPIO106, AF0)
-#define GPIO107_DFI_D4		MFP_CFG(GPIO107, AF0)
-#define GPIO165_DFI_D3		MFP_CFG(GPIO165, AF0)
-#define GPIO166_DFI_D2		MFP_CFG(GPIO166, AF0)
-#define GPIO167_DFI_D1		MFP_CFG(GPIO167, AF0)
-#define GPIO168_DFI_D0		MFP_CFG(GPIO168, AF0)
-#define GPIO143_ND_nCS0		MFP_CFG(GPIO143, AF0)
-#define GPIO144_ND_nCS1		MFP_CFG(GPIO144, AF0)
-#define GPIO147_ND_nWE		MFP_CFG(GPIO147, AF0)
-#define GPIO148_ND_nRE		MFP_CFG(GPIO148, AF0)
-#define GPIO150_ND_ALE		MFP_CFG(GPIO150, AF0)
-#define GPIO149_ND_CLE		MFP_CFG(GPIO149, AF0)
-#define GPIO112_ND_RDY0		MFP_CFG(GPIO112, AF0)
-#define GPIO160_ND_RDY1		MFP_CFG(GPIO160, AF0)
-
-/* Static Memory Controller */
-#define GPIO145_SMC_nCS0	MFP_CFG(GPIO145, AF0)
-#define GPIO146_SMC_nCS1	MFP_CFG(GPIO146, AF0)
-#define GPIO152_SMC_BE0		MFP_CFG(GPIO152, AF0)
-#define GPIO153_SMC_BE1		MFP_CFG(GPIO153, AF0)
-#define GPIO154_SMC_IRQ		MFP_CFG(GPIO154, AF0)
-#define GPIO113_SMC_RDY		MFP_CFG(GPIO113, AF0)
-#define GPIO151_SMC_SCLK	MFP_CFG(GPIO151, AF0)
-
-/* Ethernet */
-#define GPIO155_SM_ADVMUX	MFP_CFG(GPIO155, AF2)
-
-/* UART1 */
-#define GPIO45_UART1_RXD	MFP_CFG(GPIO45, AF1)
-#define GPIO46_UART1_TXD	MFP_CFG(GPIO46, AF1)
-#define GPIO29_UART1_RXD	MFP_CFG(GPIO29, AF1)
-#define GPIO30_UART1_TXD	MFP_CFG(GPIO30, AF1)
-#define GPIO31_UART1_CTS	MFP_CFG(GPIO31, AF1)
-#define GPIO32_UART1_RTS	MFP_CFG(GPIO32, AF1)
-
-/* UART2 */
-#define GPIO47_UART2_RXD	MFP_CFG(GPIO47, AF1)
-#define GPIO48_UART2_TXD	MFP_CFG(GPIO48, AF1)
-#define GPIO49_UART2_CTS	MFP_CFG(GPIO49, AF1)
-#define GPIO50_UART2_RTS	MFP_CFG(GPIO50, AF1)
-
-/* UART3 */
-#define GPIO51_UART3_RXD	MFP_CFG(GPIO51, AF1)
-#define GPIO52_UART3_TXD	MFP_CFG(GPIO52, AF1)
-#define GPIO53_UART3_CTS	MFP_CFG(GPIO53, AF1)
-#define GPIO54_UART3_RTS	MFP_CFG(GPIO54, AF1)
-
-/* MMC1 */
-#define GPIO124_MMC1_DAT7	MFP_CFG_DRV(GPIO124, AF1, FAST)
-#define GPIO125_MMC1_DAT6	MFP_CFG_DRV(GPIO125, AF1, FAST)
-#define GPIO129_MMC1_DAT5	MFP_CFG_DRV(GPIO129, AF1, FAST)
-#define GPIO130_MMC1_DAT4	MFP_CFG_DRV(GPIO130, AF1, FAST)
-#define GPIO131_MMC1_DAT3	MFP_CFG_DRV(GPIO131, AF1, FAST)
-#define GPIO132_MMC1_DAT2	MFP_CFG_DRV(GPIO132, AF1, FAST)
-#define GPIO133_MMC1_DAT1	MFP_CFG_DRV(GPIO133, AF1, FAST)
-#define GPIO134_MMC1_DAT0	MFP_CFG_DRV(GPIO134, AF1, FAST)
-#define GPIO136_MMC1_CMD	MFP_CFG_DRV(GPIO136, AF1, FAST)
-#define GPIO139_MMC1_CLK	MFP_CFG_DRV(GPIO139, AF1, FAST)
-#define GPIO140_MMC1_CD		MFP_CFG_DRV(GPIO140, AF1, FAST)
-#define GPIO141_MMC1_WP		MFP_CFG_DRV(GPIO141, AF1, FAST)
-
-/*MMC2*/
-#define GPIO37_MMC2_DAT3	MFP_CFG_DRV(GPIO37, AF1, FAST)
-#define GPIO38_MMC2_DAT2	MFP_CFG_DRV(GPIO38, AF1, FAST)
-#define GPIO39_MMC2_DAT1	MFP_CFG_DRV(GPIO39, AF1, FAST)
-#define GPIO40_MMC2_DAT0	MFP_CFG_DRV(GPIO40, AF1, FAST)
-#define GPIO41_MMC2_CMD		MFP_CFG_DRV(GPIO41, AF1, FAST)
-#define GPIO42_MMC2_CLK		MFP_CFG_DRV(GPIO42, AF1, FAST)
-
-/*MMC3*/
-#define GPIO165_MMC3_DAT7	MFP_CFG_DRV(GPIO165, AF2, FAST)
-#define GPIO162_MMC3_DAT6	MFP_CFG_DRV(GPIO162, AF2, FAST)
-#define GPIO166_MMC3_DAT5	MFP_CFG_DRV(GPIO166, AF2, FAST)
-#define GPIO163_MMC3_DAT4	MFP_CFG_DRV(GPIO163, AF2, FAST)
-#define GPIO167_MMC3_DAT3	MFP_CFG_DRV(GPIO167, AF2, FAST)
-#define GPIO164_MMC3_DAT2	MFP_CFG_DRV(GPIO164, AF2, FAST)
-#define GPIO168_MMC3_DAT1	MFP_CFG_DRV(GPIO168, AF2, FAST)
-#define GPIO111_MMC3_DAT0	MFP_CFG_DRV(GPIO111, AF2, FAST)
-#define GPIO112_MMC3_CMD	MFP_CFG_DRV(GPIO112, AF2, FAST)
-#define GPIO151_MMC3_CLK	MFP_CFG_DRV(GPIO151, AF2, FAST)
-
-/* LCD */
-#define GPIO74_LCD_FCLK		MFP_CFG_DRV(GPIO74, AF1, FAST)
-#define GPIO75_LCD_LCLK		MFP_CFG_DRV(GPIO75, AF1, FAST)
-#define GPIO76_LCD_PCLK		MFP_CFG_DRV(GPIO76, AF1, FAST)
-#define GPIO77_LCD_DENA		MFP_CFG_DRV(GPIO77, AF1, FAST)
-#define GPIO78_LCD_DD0		MFP_CFG_DRV(GPIO78, AF1, FAST)
-#define GPIO79_LCD_DD1		MFP_CFG_DRV(GPIO79, AF1, FAST)
-#define GPIO80_LCD_DD2		MFP_CFG_DRV(GPIO80, AF1, FAST)
-#define GPIO81_LCD_DD3		MFP_CFG_DRV(GPIO81, AF1, FAST)
-#define GPIO82_LCD_DD4		MFP_CFG_DRV(GPIO82, AF1, FAST)
-#define GPIO83_LCD_DD5		MFP_CFG_DRV(GPIO83, AF1, FAST)
-#define GPIO84_LCD_DD6		MFP_CFG_DRV(GPIO84, AF1, FAST)
-#define GPIO85_LCD_DD7		MFP_CFG_DRV(GPIO85, AF1, FAST)
-#define GPIO86_LCD_DD8		MFP_CFG_DRV(GPIO86, AF1, FAST)
-#define GPIO87_LCD_DD9		MFP_CFG_DRV(GPIO87, AF1, FAST)
-#define GPIO88_LCD_DD10		MFP_CFG_DRV(GPIO88, AF1, FAST)
-#define GPIO89_LCD_DD11		MFP_CFG_DRV(GPIO89, AF1, FAST)
-#define GPIO90_LCD_DD12		MFP_CFG_DRV(GPIO90, AF1, FAST)
-#define GPIO91_LCD_DD13		MFP_CFG_DRV(GPIO91, AF1, FAST)
-#define GPIO92_LCD_DD14		MFP_CFG_DRV(GPIO92, AF1, FAST)
-#define GPIO93_LCD_DD15		MFP_CFG_DRV(GPIO93, AF1, FAST)
-#define GPIO94_LCD_DD16		MFP_CFG_DRV(GPIO94, AF1, FAST)
-#define GPIO95_LCD_DD17		MFP_CFG_DRV(GPIO95, AF1, FAST)
-#define GPIO96_LCD_DD18		MFP_CFG_DRV(GPIO96, AF1, FAST)
-#define GPIO97_LCD_DD19		MFP_CFG_DRV(GPIO97, AF1, FAST)
-#define GPIO98_LCD_DD20		MFP_CFG_DRV(GPIO98, AF1, FAST)
-#define GPIO99_LCD_DD21		MFP_CFG_DRV(GPIO99, AF1, FAST)
-#define GPIO100_LCD_DD22	MFP_CFG_DRV(GPIO100, AF1, FAST)
-#define GPIO101_LCD_DD23	MFP_CFG_DRV(GPIO101, AF1, FAST)
-#define GPIO94_SPI_DCLK		MFP_CFG_DRV(GPIO94, AF3, FAST)
-#define GPIO95_SPI_CS0		MFP_CFG_DRV(GPIO95, AF3, FAST)
-#define GPIO96_SPI_DIN		MFP_CFG_DRV(GPIO96, AF3, FAST)
-#define GPIO97_SPI_DOUT		MFP_CFG_DRV(GPIO97, AF3, FAST)
-#define GPIO98_LCD_RST		MFP_CFG_DRV(GPIO98, AF0, FAST)
-
-#define GPIO114_MN_CLK_OUT	MFP_CFG_DRV(GPIO114, AF1, FAST)
-
-/*LCD TV path*/
-#define GPIO124_LCD_DD24	MFP_CFG_DRV(GPIO124, AF2, FAST)
-#define GPIO125_LCD_DD25	MFP_CFG_DRV(GPIO125, AF2, FAST)
-#define GPIO126_LCD_DD33	MFP_CFG_DRV(GPIO126, AF2, FAST)
-#define GPIO127_LCD_DD26	MFP_CFG_DRV(GPIO127, AF2, FAST)
-#define GPIO128_LCD_DD27	MFP_CFG_DRV(GPIO128, AF2, FAST)
-#define GPIO129_LCD_DD28	MFP_CFG_DRV(GPIO129, AF2, FAST)
-#define GPIO130_LCD_DD29	MFP_CFG_DRV(GPIO130, AF2, FAST)
-#define GPIO135_LCD_DD30	MFP_CFG_DRV(GPIO135, AF2, FAST)
-#define GPIO137_LCD_DD31	MFP_CFG_DRV(GPIO137, AF2, FAST)
-#define GPIO138_LCD_DD32	MFP_CFG_DRV(GPIO138, AF2, FAST)
-#define GPIO140_LCD_DD34	MFP_CFG_DRV(GPIO140, AF2, FAST)
-#define GPIO141_LCD_DD35	MFP_CFG_DRV(GPIO141, AF2, FAST)
-
-/* I2C */
-#define GPIO43_TWSI2_SCL	MFP_CFG_DRV(GPIO43, AF1, SLOW)
-#define GPIO44_TWSI2_SDA	MFP_CFG_DRV(GPIO44, AF1, SLOW)
-#define GPIO71_TWSI3_SCL	MFP_CFG_DRV(GPIO71, AF1, SLOW)
-#define GPIO72_TWSI3_SDA	MFP_CFG_DRV(GPIO72, AF1, SLOW)
-#define TWSI4_SCL		MFP_CFG_DRV(TWSI4_SCL, AF0, SLOW)
-#define TWSI4_SDA		MFP_CFG_DRV(TWSI4_SDA, AF0, SLOW)
-#define GPIO99_TWSI5_SCL	MFP_CFG_DRV(GPIO99, AF4, SLOW)
-#define GPIO100_TWSI5_SDA	MFP_CFG_DRV(GPIO100, AF4, SLOW)
-#define GPIO97_TWSI6_SCL	MFP_CFG_DRV(GPIO97, AF2, SLOW)
-#define GPIO98_TWSI6_SDA	MFP_CFG_DRV(GPIO98, AF2, SLOW)
-
-/* SSPA1 */
-#define GPIO24_I2S_SYSCLK	MFP_CFG(GPIO24, AF1)
-#define GPIO25_I2S_BITCLK	MFP_CFG(GPIO25, AF1)
-#define GPIO26_I2S_SYNC		MFP_CFG(GPIO26, AF1)
-#define GPIO27_I2S_DATA_OUT	MFP_CFG(GPIO27, AF1)
-#define GPIO28_I2S_SDATA_IN	MFP_CFG(GPIO28, AF1)
-#define GPIO114_I2S_MCLK	MFP_CFG(GPIO114, AF1)
-
-/* SSPA2 */
-#define GPIO33_SSPA2_CLK	MFP_CFG(GPIO33, AF1)
-#define GPIO34_SSPA2_FRM	MFP_CFG(GPIO34, AF1)
-#define GPIO35_SSPA2_TXD	MFP_CFG(GPIO35, AF1)
-#define GPIO36_SSPA2_RXD	MFP_CFG(GPIO36, AF1)
-
-/* Keypad */
-#define GPIO00_KP_MKIN0		MFP_CFG(GPIO0, AF1)
-#define GPIO01_KP_MKOUT0	MFP_CFG(GPIO1, AF1)
-#define GPIO02_KP_MKIN1		MFP_CFG(GPIO2, AF1)
-#define GPIO03_KP_MKOUT1	MFP_CFG(GPIO3, AF1)
-#define GPIO04_KP_MKIN2		MFP_CFG(GPIO4, AF1)
-#define GPIO05_KP_MKOUT2	MFP_CFG(GPIO5, AF1)
-#define GPIO06_KP_MKIN3		MFP_CFG(GPIO6, AF1)
-#define GPIO07_KP_MKOUT3	MFP_CFG(GPIO7, AF1)
-#define GPIO08_KP_MKIN4		MFP_CFG(GPIO8, AF1)
-#define GPIO09_KP_MKOUT4	MFP_CFG(GPIO9, AF1)
-#define GPIO10_KP_MKIN5		MFP_CFG(GPIO10, AF1)
-#define GPIO11_KP_MKOUT5	MFP_CFG(GPIO11, AF1)
-#define GPIO12_KP_MKIN6		MFP_CFG(GPIO12, AF1)
-#define GPIO13_KP_MKOUT6	MFP_CFG(GPIO13, AF1)
-#define GPIO14_KP_MKIN7		MFP_CFG(GPIO14, AF1)
-#define GPIO15_KP_MKOUT7	MFP_CFG(GPIO15, AF1)
-#define GPIO16_KP_DKIN0		MFP_CFG(GPIO16, AF1)
-#define GPIO17_KP_DKIN1		MFP_CFG(GPIO17, AF1)
-#define GPIO18_KP_DKIN2		MFP_CFG(GPIO18, AF1)
-#define GPIO19_KP_DKIN3		MFP_CFG(GPIO19, AF1)
-#define GPIO20_KP_DKIN4		MFP_CFG(GPIO20, AF1)
-#define GPIO21_KP_DKIN5		MFP_CFG(GPIO21, AF1)
-#define GPIO22_KP_DKIN6		MFP_CFG(GPIO22, AF1)
-#define GPIO23_KP_DKIN7		MFP_CFG(GPIO23, AF1)
-
-/* CAMERA */
-#define GPIO59_CCIC_IN7		MFP_CFG_DRV(GPIO59, AF1, FAST)
-#define GPIO60_CCIC_IN6		MFP_CFG_DRV(GPIO60, AF1, FAST)
-#define GPIO61_CCIC_IN5		MFP_CFG_DRV(GPIO61, AF1, FAST)
-#define GPIO62_CCIC_IN4		MFP_CFG_DRV(GPIO62, AF1, FAST)
-#define GPIO63_CCIC_IN3		MFP_CFG_DRV(GPIO63, AF1, FAST)
-#define GPIO64_CCIC_IN2		MFP_CFG_DRV(GPIO64, AF1, FAST)
-#define GPIO65_CCIC_IN1		MFP_CFG_DRV(GPIO65, AF1, FAST)
-#define GPIO66_CCIC_IN0		MFP_CFG_DRV(GPIO66, AF1, FAST)
-#define GPIO67_CAM_HSYNC	MFP_CFG_DRV(GPIO67, AF1, FAST)
-#define GPIO68_CAM_VSYNC	MFP_CFG_DRV(GPIO68, AF1, FAST)
-#define GPIO69_CAM_MCLK		MFP_CFG_DRV(GPIO69, AF1, FAST)
-#define GPIO70_CAM_PCLK		MFP_CFG_DRV(GPIO70, AF1, FAST)
-
-/* PMIC */
-#define PMIC_PMIC_INT		MFP_CFG(PMIC_INT, AF0)
-
-#endif /* __ASM_MACH_MFP_MMP2_H */
-
diff --git a/arch/arm/mach-mmp/mfp-pxa168.h b/arch/arm/mach-mmp/mfp-pxa168.h
deleted file mode 100644
index 90d16d3419a4..000000000000
--- a/arch/arm/mach-mmp/mfp-pxa168.h
+++ /dev/null
@@ -1,355 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_MFP_PXA168_H
-#define __ASM_MACH_MFP_PXA168_H
-
-#include "mfp.h"
-
-#define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
-#define MFP_DRIVE_SLOW		(0x1 << 13)
-#define MFP_DRIVE_MEDIUM	(0x2 << 13)
-#define MFP_DRIVE_FAST		(0x3 << 13)
-
-#undef MFP_CFG
-#undef MFP_CFG_DRV
-
-#define MFP_CFG(pin, af)		\
-	(MFP_LPM_INPUT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_MEDIUM)
-
-#define MFP_CFG_DRV(pin, af, drv)	\
-	(MFP_LPM_INPUT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_##drv)
-
-/* GPIO */
-#define GPIO0_GPIO		MFP_CFG(GPIO0, AF5)
-#define GPIO1_GPIO		MFP_CFG(GPIO1, AF5)
-#define GPIO2_GPIO		MFP_CFG(GPIO2, AF5)
-#define GPIO3_GPIO		MFP_CFG(GPIO3, AF5)
-#define GPIO4_GPIO		MFP_CFG(GPIO4, AF5)
-#define GPIO5_GPIO		MFP_CFG(GPIO5, AF5)
-#define GPIO6_GPIO		MFP_CFG(GPIO6, AF5)
-#define GPIO7_GPIO		MFP_CFG(GPIO7, AF5)
-#define GPIO8_GPIO		MFP_CFG(GPIO8, AF5)
-#define GPIO9_GPIO		MFP_CFG(GPIO9, AF5)
-#define GPIO10_GPIO		MFP_CFG(GPIO10, AF5)
-#define GPIO11_GPIO		MFP_CFG(GPIO11, AF5)
-#define GPIO12_GPIO		MFP_CFG(GPIO12, AF5)
-#define GPIO13_GPIO		MFP_CFG(GPIO13, AF5)
-#define GPIO14_GPIO		MFP_CFG(GPIO14, AF5)
-#define GPIO15_GPIO		MFP_CFG(GPIO15, AF5)
-#define GPIO16_GPIO		MFP_CFG(GPIO16, AF0)
-#define GPIO17_GPIO		MFP_CFG(GPIO17, AF5)
-#define GPIO18_GPIO		MFP_CFG(GPIO18, AF0)
-#define GPIO19_GPIO		MFP_CFG(GPIO19, AF5)
-#define GPIO20_GPIO		MFP_CFG(GPIO20, AF0)
-#define GPIO21_GPIO		MFP_CFG(GPIO21, AF5)
-#define GPIO22_GPIO		MFP_CFG(GPIO22, AF5)
-#define GPIO23_GPIO		MFP_CFG(GPIO23, AF5)
-#define GPIO24_GPIO		MFP_CFG(GPIO24, AF5)
-#define GPIO25_GPIO		MFP_CFG(GPIO25, AF5)
-#define GPIO26_GPIO		MFP_CFG(GPIO26, AF0)
-#define GPIO27_GPIO		MFP_CFG(GPIO27, AF5)
-#define GPIO28_GPIO		MFP_CFG(GPIO28, AF5)
-#define GPIO29_GPIO		MFP_CFG(GPIO29, AF5)
-#define GPIO30_GPIO		MFP_CFG(GPIO30, AF5)
-#define GPIO31_GPIO		MFP_CFG(GPIO31, AF5)
-#define GPIO32_GPIO		MFP_CFG(GPIO32, AF5)
-#define GPIO33_GPIO		MFP_CFG(GPIO33, AF5)
-#define GPIO34_GPIO		MFP_CFG(GPIO34, AF0)
-#define GPIO35_GPIO		MFP_CFG(GPIO35, AF0)
-#define GPIO36_GPIO		MFP_CFG(GPIO36, AF0)
-#define GPIO37_GPIO		MFP_CFG(GPIO37, AF0)
-#define GPIO38_GPIO		MFP_CFG(GPIO38, AF0)
-#define GPIO39_GPIO		MFP_CFG(GPIO39, AF0)
-#define GPIO40_GPIO		MFP_CFG(GPIO40, AF0)
-#define GPIO41_GPIO		MFP_CFG(GPIO41, AF0)
-#define GPIO42_GPIO		MFP_CFG(GPIO42, AF0)
-#define GPIO43_GPIO		MFP_CFG(GPIO43, AF0)
-#define GPIO44_GPIO		MFP_CFG(GPIO44, AF0)
-#define GPIO45_GPIO		MFP_CFG(GPIO45, AF0)
-#define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
-#define GPIO47_GPIO		MFP_CFG(GPIO47, AF0)
-#define GPIO48_GPIO		MFP_CFG(GPIO48, AF0)
-#define GPIO49_GPIO		MFP_CFG(GPIO49, AF0)
-#define GPIO50_GPIO		MFP_CFG(GPIO50, AF0)
-#define GPIO51_GPIO		MFP_CFG(GPIO51, AF0)
-#define GPIO52_GPIO		MFP_CFG(GPIO52, AF0)
-#define GPIO53_GPIO		MFP_CFG(GPIO53, AF0)
-#define GPIO54_GPIO		MFP_CFG(GPIO54, AF0)
-#define GPIO55_GPIO		MFP_CFG(GPIO55, AF0)
-#define GPIO56_GPIO		MFP_CFG(GPIO56, AF0)
-#define GPIO57_GPIO		MFP_CFG(GPIO57, AF0)
-#define GPIO58_GPIO		MFP_CFG(GPIO58, AF0)
-#define GPIO59_GPIO		MFP_CFG(GPIO59, AF0)
-#define GPIO60_GPIO		MFP_CFG(GPIO60, AF0)
-#define GPIO61_GPIO		MFP_CFG(GPIO61, AF0)
-#define GPIO62_GPIO		MFP_CFG(GPIO62, AF0)
-#define GPIO63_GPIO		MFP_CFG(GPIO63, AF0)
-#define GPIO64_GPIO		MFP_CFG(GPIO64, AF0)
-#define GPIO65_GPIO		MFP_CFG(GPIO65, AF0)
-#define GPIO66_GPIO		MFP_CFG(GPIO66, AF0)
-#define GPIO67_GPIO		MFP_CFG(GPIO67, AF0)
-#define GPIO68_GPIO		MFP_CFG(GPIO68, AF0)
-#define GPIO69_GPIO		MFP_CFG(GPIO69, AF0)
-#define GPIO70_GPIO		MFP_CFG(GPIO70, AF0)
-#define GPIO71_GPIO		MFP_CFG(GPIO71, AF0)
-#define GPIO72_GPIO		MFP_CFG(GPIO72, AF0)
-#define GPIO73_GPIO		MFP_CFG(GPIO73, AF0)
-#define GPIO74_GPIO		MFP_CFG(GPIO74, AF0)
-#define GPIO75_GPIO		MFP_CFG(GPIO75, AF0)
-#define GPIO76_GPIO		MFP_CFG(GPIO76, AF0)
-#define GPIO77_GPIO		MFP_CFG(GPIO77, AF0)
-#define GPIO78_GPIO		MFP_CFG(GPIO78, AF0)
-#define GPIO79_GPIO		MFP_CFG(GPIO79, AF0)
-#define GPIO80_GPIO		MFP_CFG(GPIO80, AF0)
-#define GPIO81_GPIO		MFP_CFG(GPIO81, AF0)
-#define GPIO82_GPIO		MFP_CFG(GPIO82, AF0)
-#define GPIO83_GPIO		MFP_CFG(GPIO83, AF0)
-#define GPIO84_GPIO		MFP_CFG(GPIO84, AF0)
-#define GPIO85_GPIO		MFP_CFG(GPIO85, AF0)
-#define GPIO86_GPIO		MFP_CFG(GPIO86, AF0)
-#define GPIO87_GPIO		MFP_CFG(GPIO87, AF0)
-#define GPIO88_GPIO		MFP_CFG(GPIO88, AF0)
-#define GPIO89_GPIO		MFP_CFG(GPIO89, AF0)
-#define GPIO90_GPIO		MFP_CFG(GPIO90, AF0)
-#define GPIO91_GPIO		MFP_CFG(GPIO91, AF0)
-#define GPIO92_GPIO		MFP_CFG(GPIO92, AF0)
-#define GPIO93_GPIO		MFP_CFG(GPIO93, AF0)
-#define GPIO94_GPIO		MFP_CFG(GPIO94, AF0)
-#define GPIO95_GPIO		MFP_CFG(GPIO95, AF0)
-#define GPIO96_GPIO		MFP_CFG(GPIO96, AF0)
-#define GPIO97_GPIO		MFP_CFG(GPIO97, AF0)
-#define GPIO98_GPIO		MFP_CFG(GPIO98, AF0)
-#define GPIO99_GPIO		MFP_CFG(GPIO99, AF0)
-#define GPIO100_GPIO		MFP_CFG(GPIO100, AF0)
-#define GPIO101_GPIO		MFP_CFG(GPIO101, AF0)
-#define GPIO102_GPIO		MFP_CFG(GPIO102, AF0)
-#define GPIO103_GPIO		MFP_CFG(GPIO103, AF0)
-#define GPIO104_GPIO		MFP_CFG(GPIO104, AF0)
-#define GPIO105_GPIO		MFP_CFG(GPIO105, AF0)
-#define GPIO106_GPIO		MFP_CFG(GPIO106, AF0)
-#define GPIO107_GPIO		MFP_CFG(GPIO107, AF0)
-#define GPIO108_GPIO		MFP_CFG(GPIO108, AF0)
-#define GPIO109_GPIO		MFP_CFG(GPIO109, AF0)
-#define GPIO110_GPIO		MFP_CFG(GPIO110, AF0)
-#define GPIO111_GPIO		MFP_CFG(GPIO111, AF0)
-#define GPIO112_GPIO		MFP_CFG(GPIO112, AF0)
-#define GPIO113_GPIO		MFP_CFG(GPIO113, AF0)
-#define GPIO114_GPIO		MFP_CFG(GPIO114, AF0)
-#define GPIO115_GPIO		MFP_CFG(GPIO115, AF0)
-#define GPIO116_GPIO		MFP_CFG(GPIO116, AF0)
-#define GPIO117_GPIO		MFP_CFG(GPIO117, AF0)
-#define GPIO118_GPIO		MFP_CFG(GPIO118, AF0)
-#define GPIO119_GPIO		MFP_CFG(GPIO119, AF0)
-#define GPIO120_GPIO		MFP_CFG(GPIO120, AF0)
-#define GPIO121_GPIO		MFP_CFG(GPIO121, AF0)
-#define GPIO122_GPIO		MFP_CFG(GPIO122, AF0)
-
-/* DFI */
-#define GPIO0_DFI_D15		MFP_CFG(GPIO0, AF0)
-#define GPIO1_DFI_D14		MFP_CFG(GPIO1, AF0)
-#define GPIO2_DFI_D13		MFP_CFG(GPIO2, AF0)
-#define GPIO3_DFI_D12		MFP_CFG(GPIO3, AF0)
-#define GPIO4_DFI_D11		MFP_CFG(GPIO4, AF0)
-#define GPIO5_DFI_D10		MFP_CFG(GPIO5, AF0)
-#define GPIO6_DFI_D9		MFP_CFG(GPIO6, AF0)
-#define GPIO7_DFI_D8		MFP_CFG(GPIO7, AF0)
-#define GPIO8_DFI_D7		MFP_CFG(GPIO8, AF0)
-#define GPIO9_DFI_D6		MFP_CFG(GPIO9, AF0)
-#define GPIO10_DFI_D5		MFP_CFG(GPIO10, AF0)
-#define GPIO11_DFI_D4		MFP_CFG(GPIO11, AF0)
-#define GPIO12_DFI_D3		MFP_CFG(GPIO12, AF0)
-#define GPIO13_DFI_D2		MFP_CFG(GPIO13, AF0)
-#define GPIO14_DFI_D1		MFP_CFG(GPIO14, AF0)
-#define GPIO15_DFI_D0		MFP_CFG(GPIO15, AF0)
-
-#define GPIO30_DFI_ADDR0	MFP_CFG(GPIO30, AF0)
-#define GPIO31_DFI_ADDR1	MFP_CFG(GPIO31, AF0)
-#define GPIO32_DFI_ADDR2	MFP_CFG(GPIO32, AF0)
-#define GPIO33_DFI_ADDR3	MFP_CFG(GPIO33, AF0)
-
-/* NAND */
-#define GPIO16_ND_nCS0		MFP_CFG(GPIO16, AF1)
-#define GPIO17_ND_nWE		MFP_CFG(GPIO17, AF0)
-#define GPIO21_ND_ALE		MFP_CFG(GPIO21, AF0)
-#define GPIO22_ND_CLE		MFP_CFG(GPIO22, AF0)
-#define GPIO24_ND_nRE		MFP_CFG(GPIO24, AF0)
-#define GPIO26_ND_RnB1		MFP_CFG(GPIO26, AF1)
-#define GPIO27_ND_RnB2		MFP_CFG(GPIO27, AF1)
-
-/* Static Memory Controller */
-#define GPIO18_SMC_nCS0		MFP_CFG(GPIO18, AF3)
-#define GPIO18_SMC_nCS1		MFP_CFG(GPIO18, AF2)
-#define GPIO16_SMC_nCS0		MFP_CFG(GPIO16, AF2)
-#define GPIO16_SMC_nCS1		MFP_CFG(GPIO16, AF3)
-#define GPIO19_SMC_nCS0		MFP_CFG(GPIO19, AF0)
-#define GPIO20_SMC_nCS1		MFP_CFG(GPIO20, AF2)
-#define GPIO23_SMC_nLUA		MFP_CFG(GPIO23, AF0)
-#define GPIO25_SMC_nLLA		MFP_CFG(GPIO25, AF0)
-#define GPIO27_SMC_IRQ		MFP_CFG(GPIO27, AF0)
-#define GPIO28_SMC_RDY		MFP_CFG(GPIO28, AF0)
-#define GPIO29_SMC_SCLK		MFP_CFG(GPIO29, AF0)
-#define GPIO34_SMC_nCS1		MFP_CFG(GPIO34, AF2)
-#define GPIO35_SMC_BE1		MFP_CFG(GPIO35, AF2)
-#define GPIO36_SMC_BE2		MFP_CFG(GPIO36, AF2)
-
-/* Compact Flash */
-#define GPIO19_CF_nCE1		MFP_CFG(GPIO19, AF3)
-#define GPIO20_CF_nCE2		MFP_CFG(GPIO20, AF3)
-#define GPIO23_CF_nALE		MFP_CFG(GPIO23, AF3)
-#define GPIO25_CF_nRESET	MFP_CFG(GPIO25, AF3)
-#define GPIO28_CF_RDY		MFP_CFG(GPIO28, AF3)
-#define GPIO29_CF_STSCH		MFP_CFG(GPIO29, AF3)
-#define GPIO30_CF_nREG		MFP_CFG(GPIO30, AF3)
-#define GPIO31_CF_nIOIS16	MFP_CFG(GPIO31, AF3)
-#define GPIO32_CF_nCD1		MFP_CFG(GPIO32, AF3)
-#define GPIO33_CF_nCD2		MFP_CFG(GPIO33, AF3)
-
-/* UART */
-#define GPIO8_UART3_TXD		MFP_CFG(GPIO8, AF2)
-#define GPIO9_UART3_RXD		MFP_CFG(GPIO9, AF2)
-#define GPIO1O_UART3_CTS	MFP_CFG(GPIO10, AF2)
-#define GPIO11_UART3_RTS	MFP_CFG(GPIO11, AF2)
-#define GPIO88_UART2_TXD	MFP_CFG(GPIO88, AF2)
-#define GPIO89_UART2_RXD	MFP_CFG(GPIO89, AF2)
-#define GPIO107_UART1_TXD	MFP_CFG_DRV(GPIO107, AF1, FAST)
-#define GPIO107_UART1_RXD	MFP_CFG_DRV(GPIO107, AF2, FAST)
-#define GPIO108_UART1_RXD	MFP_CFG_DRV(GPIO108, AF1, FAST)
-#define GPIO108_UART1_TXD	MFP_CFG_DRV(GPIO108, AF2, FAST)
-#define GPIO109_UART1_CTS	MFP_CFG(GPIO109, AF1)
-#define GPIO109_UART1_RTS	MFP_CFG(GPIO109, AF2)
-#define GPIO110_UART1_RTS	MFP_CFG(GPIO110, AF1)
-#define GPIO110_UART1_CTS	MFP_CFG(GPIO110, AF2)
-#define GPIO111_UART1_RI	MFP_CFG(GPIO111, AF1)
-#define GPIO111_UART1_DSR	MFP_CFG(GPIO111, AF2)
-#define GPIO112_UART1_DTR	MFP_CFG(GPIO111, AF1)
-#define GPIO112_UART1_DCD	MFP_CFG(GPIO112, AF2)
-
-/* MMC1 */
-#define GPIO37_MMC1_DAT7	MFP_CFG(GPIO37, AF1)
-#define GPIO38_MMC1_DAT6	MFP_CFG(GPIO38, AF1)
-#define GPIO54_MMC1_DAT5	MFP_CFG(GPIO54, AF1)
-#define GPIO48_MMC1_DAT4	MFP_CFG(GPIO48, AF1)
-#define GPIO51_MMC1_DAT3	MFP_CFG(GPIO51, AF1)
-#define GPIO52_MMC1_DAT2	MFP_CFG(GPIO52, AF1)
-#define GPIO40_MMC1_DAT1	MFP_CFG(GPIO40, AF1)
-#define GPIO41_MMC1_DAT0	MFP_CFG(GPIO41, AF1)
-#define GPIO49_MMC1_CMD		MFP_CFG(GPIO49, AF1)
-#define GPIO43_MMC1_CLK		MFP_CFG(GPIO43, AF1)
-#define GPIO53_MMC1_CD		MFP_CFG(GPIO53, AF1)
-#define GPIO46_MMC1_WP		MFP_CFG(GPIO46, AF1)
-
-/* MMC2 */
-#define	GPIO28_MMC2_CMD		MFP_CFG_DRV(GPIO28, AF6, FAST)
-#define	GPIO29_MMC2_CLK		MFP_CFG_DRV(GPIO29, AF6, FAST)
-#define	GPIO30_MMC2_DAT0	MFP_CFG_DRV(GPIO30, AF6, FAST)
-#define	GPIO31_MMC2_DAT1	MFP_CFG_DRV(GPIO31, AF6, FAST)
-#define	GPIO32_MMC2_DAT2	MFP_CFG_DRV(GPIO32, AF6, FAST)
-#define	GPIO33_MMC2_DAT3	MFP_CFG_DRV(GPIO33, AF6, FAST)
-
-/* MMC4 */
-#define GPIO125_MMC4_DAT3       MFP_CFG_DRV(GPIO125, AF7, FAST)
-#define GPIO126_MMC4_DAT2       MFP_CFG_DRV(GPIO126, AF7, FAST)
-#define GPIO127_MMC4_DAT1       MFP_CFG_DRV(GPIO127, AF7, FAST)
-#define GPIO0_2_MMC4_DAT0       MFP_CFG_DRV(GPIO0_2, AF7, FAST)
-#define GPIO1_2_MMC4_CMD        MFP_CFG_DRV(GPIO1_2, AF7, FAST)
-#define GPIO2_2_MMC4_CLK        MFP_CFG_DRV(GPIO2_2, AF7, FAST)
-
-/* LCD */
-#define GPIO84_LCD_CS		MFP_CFG(GPIO84, AF1)
-#define GPIO60_LCD_DD0		MFP_CFG(GPIO60, AF1)
-#define GPIO61_LCD_DD1		MFP_CFG(GPIO61, AF1)
-#define GPIO70_LCD_DD10		MFP_CFG(GPIO70, AF1)
-#define GPIO71_LCD_DD11		MFP_CFG(GPIO71, AF1)
-#define GPIO72_LCD_DD12		MFP_CFG(GPIO72, AF1)
-#define GPIO73_LCD_DD13		MFP_CFG(GPIO73, AF1)
-#define GPIO74_LCD_DD14		MFP_CFG(GPIO74, AF1)
-#define GPIO75_LCD_DD15		MFP_CFG(GPIO75, AF1)
-#define GPIO76_LCD_DD16		MFP_CFG(GPIO76, AF1)
-#define GPIO77_LCD_DD17		MFP_CFG(GPIO77, AF1)
-#define GPIO78_LCD_DD18		MFP_CFG(GPIO78, AF1)
-#define GPIO79_LCD_DD19		MFP_CFG(GPIO79, AF1)
-#define GPIO62_LCD_DD2		MFP_CFG(GPIO62, AF1)
-#define GPIO80_LCD_DD20		MFP_CFG(GPIO80, AF1)
-#define GPIO81_LCD_DD21		MFP_CFG(GPIO81, AF1)
-#define GPIO82_LCD_DD22		MFP_CFG(GPIO82, AF1)
-#define GPIO83_LCD_DD23		MFP_CFG(GPIO83, AF1)
-#define GPIO63_LCD_DD3		MFP_CFG(GPIO63, AF1)
-#define GPIO64_LCD_DD4		MFP_CFG(GPIO64, AF1)
-#define GPIO65_LCD_DD5		MFP_CFG(GPIO65, AF1)
-#define GPIO66_LCD_DD6		MFP_CFG(GPIO66, AF1)
-#define GPIO67_LCD_DD7		MFP_CFG(GPIO67, AF1)
-#define GPIO68_LCD_DD8		MFP_CFG(GPIO68, AF1)
-#define GPIO69_LCD_DD9		MFP_CFG(GPIO69, AF1)
-#define GPIO59_LCD_DENA_BIAS	MFP_CFG(GPIO59, AF1)
-#define GPIO56_LCD_FCLK_RD	MFP_CFG(GPIO56, AF1)
-#define GPIO57_LCD_LCLK_A0	MFP_CFG(GPIO57, AF1)
-#define GPIO58_LCD_PCLK_WR	MFP_CFG(GPIO58, AF1)
-#define GPIO85_LCD_VSYNC	MFP_CFG(GPIO85, AF1)
-
-/* I2C */
-#define GPIO105_CI2C_SDA	MFP_CFG(GPIO105, AF1)
-#define GPIO106_CI2C_SCL	MFP_CFG(GPIO106, AF1)
-
-/* I2S */
-#define GPIO113_I2S_MCLK	MFP_CFG(GPIO113, AF6)
-#define GPIO114_I2S_FRM		MFP_CFG(GPIO114, AF1)
-#define GPIO115_I2S_BCLK	MFP_CFG(GPIO115, AF1)
-#define GPIO116_I2S_RXD		MFP_CFG(GPIO116, AF2)
-#define GPIO116_I2S_TXD         MFP_CFG(GPIO116, AF1)
-#define GPIO117_I2S_TXD		MFP_CFG(GPIO117, AF2)
-
-/* PWM */
-#define GPIO96_PWM3_OUT		MFP_CFG(GPIO96, AF1)
-#define GPIO97_PWM2_OUT		MFP_CFG(GPIO97, AF1)
-#define GPIO98_PWM1_OUT		MFP_CFG(GPIO98, AF1)
-#define GPIO104_PWM4_OUT	MFP_CFG(GPIO104, AF1)
-#define GPIO106_PWM2_OUT	MFP_CFG(GPIO106, AF2)
-#define GPIO74_PWM4_OUT		MFP_CFG(GPIO74, AF2)
-#define GPIO75_PWM3_OUT		MFP_CFG(GPIO75, AF2)
-#define GPIO76_PWM2_OUT		MFP_CFG(GPIO76, AF2)
-#define GPIO77_PWM1_OUT		MFP_CFG(GPIO77, AF2)
-#define GPIO82_PWM4_OUT		MFP_CFG(GPIO82, AF2)
-#define GPIO83_PWM3_OUT		MFP_CFG(GPIO83, AF2)
-#define GPIO84_PWM2_OUT		MFP_CFG(GPIO84, AF2)
-#define GPIO85_PWM1_OUT		MFP_CFG(GPIO85, AF2)
-#define GPIO84_PWM1_OUT		MFP_CFG(GPIO84, AF4)
-#define GPIO122_PWM3_OUT	MFP_CFG(GPIO122, AF3)
-#define GPIO123_PWM1_OUT	MFP_CFG(GPIO123, AF1)
-#define GPIO124_PWM2_OUT	MFP_CFG(GPIO124, AF1)
-#define GPIO125_PWM3_OUT	MFP_CFG(GPIO125, AF1)
-#define GPIO126_PWM4_OUT	MFP_CFG(GPIO126, AF1)
-#define GPIO86_PWM1_OUT		MFP_CFG(GPIO86, AF2)
-#define GPIO86_PWM2_OUT		MFP_CFG(GPIO86, AF3)
-
-/* Keypad */
-#define GPIO109_KP_MKIN1        MFP_CFG(GPIO109, AF7)
-#define GPIO110_KP_MKIN0        MFP_CFG(GPIO110, AF7)
-#define GPIO111_KP_MKOUT7       MFP_CFG(GPIO111, AF7)
-#define GPIO112_KP_MKOUT6       MFP_CFG(GPIO112, AF7)
-#define GPIO121_KP_MKIN4        MFP_CFG(GPIO121, AF7)
-
-/* Fast Ethernet */
-#define GPIO86_TX_CLK		MFP_CFG(GPIO86, AF5)
-#define GPIO87_TX_EN		MFP_CFG(GPIO87, AF5)
-#define GPIO88_TX_DQ3		MFP_CFG(GPIO88, AF5)
-#define GPIO89_TX_DQ2		MFP_CFG(GPIO89, AF5)
-#define GPIO90_TX_DQ1		MFP_CFG(GPIO90, AF5)
-#define GPIO91_TX_DQ0		MFP_CFG(GPIO91, AF5)
-#define GPIO92_MII_CRS		MFP_CFG(GPIO92, AF5)
-#define GPIO93_MII_COL		MFP_CFG(GPIO93, AF5)
-#define GPIO94_RX_CLK		MFP_CFG(GPIO94, AF5)
-#define GPIO95_RX_ER		MFP_CFG(GPIO95, AF5)
-#define GPIO96_RX_DQ3		MFP_CFG(GPIO96, AF5)
-#define GPIO97_RX_DQ2		MFP_CFG(GPIO97, AF5)
-#define GPIO98_RX_DQ1		MFP_CFG(GPIO98, AF5)
-#define GPIO99_RX_DQ0		MFP_CFG(GPIO99, AF5)
-#define GPIO100_MII_MDC		MFP_CFG(GPIO100, AF5)
-#define GPIO101_MII_MDIO	MFP_CFG(GPIO101, AF5)
-#define GPIO103_RX_DV		MFP_CFG(GPIO103, AF5)
-
-/* SSP2 */
-#define GPIO107_SSP2_RXD	MFP_CFG(GPIO107, AF4)
-#define GPIO108_SSP2_TXD	MFP_CFG(GPIO108, AF4)
-#define GPIO111_SSP2_CLK	MFP_CFG(GPIO111, AF4)
-#define GPIO112_SSP2_FRM	MFP_CFG(GPIO112, AF4)
-
-#endif /* __ASM_MACH_MFP_PXA168_H */
diff --git a/arch/arm/mach-mmp/mfp-pxa910.h b/arch/arm/mach-mmp/mfp-pxa910.h
deleted file mode 100644
index 6f900cade631..000000000000
--- a/arch/arm/mach-mmp/mfp-pxa910.h
+++ /dev/null
@@ -1,170 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_MFP_PXA910_H
-#define __ASM_MACH_MFP_PXA910_H
-
-#include "mfp.h"
-
-#define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
-#define MFP_DRIVE_SLOW		(0x2 << 13)
-#define MFP_DRIVE_MEDIUM	(0x4 << 13)
-#define MFP_DRIVE_FAST		(0x6 << 13)
-
-/* UART2 */
-#define GPIO47_UART2_RXD	MFP_CFG(GPIO47, AF6)
-#define GPIO48_UART2_TXD	MFP_CFG(GPIO48, AF6)
-
-/* UART3 */
-#define GPIO31_UART3_RXD	MFP_CFG(GPIO31, AF4)
-#define GPIO32_UART3_TXD	MFP_CFG(GPIO32, AF4)
-
-/*IRDA*/
-#define GPIO51_IRDA_SHDN	MFP_CFG(GPIO51, AF0)
-
-/* SMC */
-#define SM_nCS0_nCS0		MFP_CFG(SM_nCS0, AF0)
-#define SM_ADV_SM_ADV		MFP_CFG(SM_ADV, AF0)
-#define SM_SCLK_SM_SCLK		MFP_CFG(SM_SCLK, AF0)
-#define SM_BE0_SM_BE0		MFP_CFG(SM_BE0, AF1)
-#define SM_BE1_SM_BE1		MFP_CFG(SM_BE1, AF1)
-
-/* I2C */
-#define GPIO53_CI2C_SCL		MFP_CFG(GPIO53, AF2)
-#define GPIO54_CI2C_SDA		MFP_CFG(GPIO54, AF2)
-
-/* SSP1 (I2S) */
-#define GPIO24_SSP1_SDATA_IN	MFP_CFG_DRV(GPIO24, AF1, MEDIUM)
-#define GPIO21_SSP1_BITCLK	MFP_CFG_DRV(GPIO21, AF1, MEDIUM)
-#define GPIO20_SSP1_SYSCLK	MFP_CFG_DRV(GPIO20, AF1, MEDIUM)
-#define GPIO22_SSP1_SYNC	MFP_CFG_DRV(GPIO22, AF1, MEDIUM)
-#define GPIO23_SSP1_DATA_OUT	MFP_CFG_DRV(GPIO23, AF1, MEDIUM)
-#define GPIO124_MN_CLK_OUT	MFP_CFG_DRV(GPIO124, AF1, MEDIUM)
-#define GPIO123_CLK_REQ		MFP_CFG_DRV(GPIO123, AF0, MEDIUM)
-
-/* DFI */
-#define DF_IO0_ND_IO0		MFP_CFG(DF_IO0, AF0)
-#define DF_IO1_ND_IO1		MFP_CFG(DF_IO1, AF0)
-#define DF_IO2_ND_IO2		MFP_CFG(DF_IO2, AF0)
-#define DF_IO3_ND_IO3		MFP_CFG(DF_IO3, AF0)
-#define DF_IO4_ND_IO4		MFP_CFG(DF_IO4, AF0)
-#define DF_IO5_ND_IO5		MFP_CFG(DF_IO5, AF0)
-#define DF_IO6_ND_IO6		MFP_CFG(DF_IO6, AF0)
-#define DF_IO7_ND_IO7		MFP_CFG(DF_IO7, AF0)
-#define DF_IO8_ND_IO8		MFP_CFG(DF_IO8, AF0)
-#define DF_IO9_ND_IO9		MFP_CFG(DF_IO9, AF0)
-#define DF_IO10_ND_IO10		MFP_CFG(DF_IO10, AF0)
-#define DF_IO11_ND_IO11		MFP_CFG(DF_IO11, AF0)
-#define DF_IO12_ND_IO12		MFP_CFG(DF_IO12, AF0)
-#define DF_IO13_ND_IO13		MFP_CFG(DF_IO13, AF0)
-#define DF_IO14_ND_IO14		MFP_CFG(DF_IO14, AF0)
-#define DF_IO15_ND_IO15		MFP_CFG(DF_IO15, AF0)
-#define DF_nCS0_SM_nCS2_nCS0	MFP_CFG(DF_nCS0_SM_nCS2, AF0)
-#define DF_ALE_SM_WEn_ND_ALE	MFP_CFG(DF_ALE_SM_WEn, AF1)
-#define DF_CLE_SM_OEn_ND_CLE	MFP_CFG(DF_CLE_SM_OEn, AF0)
-#define DF_WEn_DF_WEn		MFP_CFG(DF_WEn, AF1)
-#define DF_REn_DF_REn		MFP_CFG(DF_REn, AF1)
-#define DF_RDY0_DF_RDY0		MFP_CFG(DF_RDY0, AF0)
-
-/*keypad*/
-#define GPIO00_KP_MKIN0		MFP_CFG(GPIO0, AF1)
-#define GPIO01_KP_MKOUT0	MFP_CFG(GPIO1, AF1)
-#define GPIO02_KP_MKIN1		MFP_CFG(GPIO2, AF1)
-#define GPIO03_KP_MKOUT1	MFP_CFG(GPIO3, AF1)
-#define GPIO04_KP_MKIN2		MFP_CFG(GPIO4, AF1)
-#define GPIO05_KP_MKOUT2	MFP_CFG(GPIO5, AF1)
-#define GPIO06_KP_MKIN3		MFP_CFG(GPIO6, AF1)
-#define GPIO07_KP_MKOUT3	MFP_CFG(GPIO7, AF1)
-#define GPIO08_KP_MKIN4		MFP_CFG(GPIO8, AF1)
-#define GPIO09_KP_MKOUT4	MFP_CFG(GPIO9, AF1)
-#define GPIO10_KP_MKIN5		MFP_CFG(GPIO10, AF1)
-#define GPIO11_KP_MKOUT5	MFP_CFG(GPIO11, AF1)
-#define GPIO12_KP_MKIN6		MFP_CFG(GPIO12, AF1)
-#define GPIO13_KP_MKOUT6	MFP_CFG(GPIO13, AF1)
-#define GPIO14_KP_MKIN7		MFP_CFG(GPIO14, AF1)
-#define GPIO15_KP_MKOUT7	MFP_CFG(GPIO15, AF1)
-#define GPIO16_KP_DKIN0		MFP_CFG(GPIO16, AF1)
-#define GPIO17_KP_DKIN1		MFP_CFG(GPIO17, AF1)
-#define GPIO18_KP_DKIN2		MFP_CFG(GPIO18, AF1)
-#define GPIO19_KP_DKIN3		MFP_CFG(GPIO19, AF1)
-
-/* LCD */
-#define GPIO81_LCD_FCLK		MFP_CFG(GPIO81, AF1)
-#define GPIO82_LCD_LCLK		MFP_CFG(GPIO82, AF1)
-#define GPIO83_LCD_PCLK		MFP_CFG(GPIO83, AF1)
-#define GPIO84_LCD_DENA		MFP_CFG(GPIO84, AF1)
-#define GPIO85_LCD_DD0		MFP_CFG(GPIO85, AF1)
-#define GPIO86_LCD_DD1		MFP_CFG(GPIO86, AF1)
-#define GPIO87_LCD_DD2		MFP_CFG(GPIO87, AF1)
-#define GPIO88_LCD_DD3		MFP_CFG(GPIO88, AF1)
-#define GPIO89_LCD_DD4		MFP_CFG(GPIO89, AF1)
-#define GPIO90_LCD_DD5		MFP_CFG(GPIO90, AF1)
-#define GPIO91_LCD_DD6		MFP_CFG(GPIO91, AF1)
-#define GPIO92_LCD_DD7		MFP_CFG(GPIO92, AF1)
-#define GPIO93_LCD_DD8		MFP_CFG(GPIO93, AF1)
-#define GPIO94_LCD_DD9		MFP_CFG(GPIO94, AF1)
-#define GPIO95_LCD_DD10		MFP_CFG(GPIO95, AF1)
-#define GPIO96_LCD_DD11		MFP_CFG(GPIO96, AF1)
-#define GPIO97_LCD_DD12		MFP_CFG(GPIO97, AF1)
-#define GPIO98_LCD_DD13		MFP_CFG(GPIO98, AF1)
-#define GPIO100_LCD_DD14	MFP_CFG(GPIO100, AF1)
-#define GPIO101_LCD_DD15	MFP_CFG(GPIO101, AF1)
-#define GPIO102_LCD_DD16	MFP_CFG(GPIO102, AF1)
-#define GPIO103_LCD_DD17	MFP_CFG(GPIO103, AF1)
-#define GPIO104_LCD_DD18	MFP_CFG(GPIO104, AF1)
-#define GPIO105_LCD_DD19	MFP_CFG(GPIO105, AF1)
-#define GPIO106_LCD_DD20	MFP_CFG(GPIO106, AF1)
-#define GPIO107_LCD_DD21	MFP_CFG(GPIO107, AF1)
-#define GPIO108_LCD_DD22	MFP_CFG(GPIO108, AF1)
-#define GPIO109_LCD_DD23	MFP_CFG(GPIO109, AF1)
-
-#define GPIO104_LCD_SPIDOUT	MFP_CFG(GPIO104, AF3)
-#define GPIO105_LCD_SPIDIN	MFP_CFG(GPIO105, AF3)
-#define GPIO107_LCD_CS1 	MFP_CFG(GPIO107, AF3)
-#define GPIO108_LCD_DCLK	MFP_CFG(GPIO108, AF3)
-
-#define GPIO106_LCD_RESET	MFP_CFG(GPIO106, AF0)
-
-/*smart panel*/
-#define GPIO82_LCD_A0		MFP_CFG(GPIO82, AF0)
-#define GPIO83_LCD_WR		MFP_CFG(GPIO83, AF0)
-#define GPIO103_LCD_CS		MFP_CFG(GPIO103, AF0)
-
-/*1wire*/
-#define GPIO106_1WIRE		MFP_CFG(GPIO106, AF3)
-
-/*CCIC*/
-#define GPIO67_CCIC_IN7		MFP_CFG_DRV(GPIO67, AF1, MEDIUM)
-#define GPIO68_CCIC_IN6		MFP_CFG_DRV(GPIO68, AF1, MEDIUM)
-#define GPIO69_CCIC_IN5		MFP_CFG_DRV(GPIO69, AF1, MEDIUM)
-#define GPIO70_CCIC_IN4		MFP_CFG_DRV(GPIO70, AF1, MEDIUM)
-#define GPIO71_CCIC_IN3		MFP_CFG_DRV(GPIO71, AF1, MEDIUM)
-#define GPIO72_CCIC_IN2		MFP_CFG_DRV(GPIO72, AF1, MEDIUM)
-#define GPIO73_CCIC_IN1		MFP_CFG_DRV(GPIO73, AF1, MEDIUM)
-#define GPIO74_CCIC_IN0		MFP_CFG_DRV(GPIO74, AF1, MEDIUM)
-#define GPIO75_CAM_HSYNC	MFP_CFG_DRV(GPIO75, AF1, MEDIUM)
-#define GPIO76_CAM_VSYNC	MFP_CFG_DRV(GPIO76, AF1, MEDIUM)
-#define GPIO77_CAM_MCLK		MFP_CFG_DRV(GPIO77, AF1, MEDIUM)
-#define GPIO78_CAM_PCLK		MFP_CFG_DRV(GPIO78, AF1, MEDIUM)
-
-/* MMC1 */
-#define MMC1_DAT7_MMC1_DAT7	MFP_CFG_DRV(MMC1_DAT7, AF0, MEDIUM)
-#define MMC1_DAT6_MMC1_DAT6	MFP_CFG_DRV(MMC1_DAT6, AF0, MEDIUM)
-#define MMC1_DAT5_MMC1_DAT5	MFP_CFG_DRV(MMC1_DAT5, AF0, MEDIUM)
-#define MMC1_DAT4_MMC1_DAT4	MFP_CFG_DRV(MMC1_DAT4, AF0, MEDIUM)
-#define MMC1_DAT3_MMC1_DAT3	MFP_CFG_DRV(MMC1_DAT3, AF0, MEDIUM)
-#define MMC1_DAT2_MMC1_DAT2	MFP_CFG_DRV(MMC1_DAT2, AF0, MEDIUM)
-#define MMC1_DAT1_MMC1_DAT1	MFP_CFG_DRV(MMC1_DAT1, AF0, MEDIUM)
-#define MMC1_DAT0_MMC1_DAT0	MFP_CFG_DRV(MMC1_DAT0, AF0, MEDIUM)
-#define MMC1_CMD_MMC1_CMD	MFP_CFG_DRV(MMC1_CMD, AF0, MEDIUM)
-#define MMC1_CLK_MMC1_CLK	MFP_CFG_DRV(MMC1_CLK, AF0, MEDIUM)
-#define MMC1_CD_MMC1_CD		MFP_CFG_DRV(MMC1_CD, AF0, MEDIUM)
-#define MMC1_WP_MMC1_WP		MFP_CFG_DRV(MMC1_WP, AF0, MEDIUM)
-
-/* PWM */
-#define GPIO27_PWM3_AF2		MFP_CFG(GPIO27, AF2)
-#define GPIO51_PWM2_OUT		MFP_CFG(GPIO51, AF2)
-#define GPIO117_PWM1_OUT	MFP_CFG(GPIO117, AF2)
-#define GPIO118_PWM2_OUT	MFP_CFG(GPIO118, AF2)
-#define GPIO119_PWM3_OUT	MFP_CFG(GPIO119, AF2)
-#define GPIO120_PWM4_OUT	MFP_CFG(GPIO120, AF2)
-
-#endif /* __ASM_MACH MFP_PXA910_H */
diff --git a/arch/arm/mach-mmp/mfp.h b/arch/arm/mach-mmp/mfp.h
deleted file mode 100644
index 6f3057987756..000000000000
--- a/arch/arm/mach-mmp/mfp.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_MFP_H
-#define __ASM_MACH_MFP_H
-
-#include <linux/soc/pxa/mfp.h>
-
-/*
- * NOTE: the MFPR register bit definitions on PXA168 processor lines are a
- * bit different from those on PXA3xx.  Bit [7:10] are now reserved, which
- * were SLEEP_OE_N, SLEEP_DATA, SLEEP_SEL and the LSB of DRIVE bits.
- *
- * To cope with this difference and re-use the pxa3xx mfp code as much as
- * possible, we make the following compromise:
- *
- * 1. SLEEP_OE_N will always be programmed to '1' (by MFP_LPM_FLOAT)
- * 2. DRIVE strength definitions redefined to include the reserved bit
- *    - the reserved bit differs between pxa168 and pxa910, and the
- *      MFP_DRIVE_* macros are individually defined in mfp-pxa{168,910}.h
- * 3. Override MFP_CFG() and MFP_CFG_DRV()
- * 4. Drop the use of MFP_CFG_LPM() and MFP_CFG_X()
- */
-
-#undef MFP_CFG
-#undef MFP_CFG_DRV
-#undef MFP_CFG_LPM
-#undef MFP_CFG_X
-#undef MFP_CFG_DEFAULT
-
-#define MFP_CFG(pin, af)		\
-	(MFP_LPM_FLOAT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_MEDIUM)
-
-#define MFP_CFG_DRV(pin, af, drv)	\
-	(MFP_LPM_FLOAT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_##drv)
-
-#endif /* __ASM_MACH_MFP_H */
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
deleted file mode 100644
index bbc4c2274de3..000000000000
--- a/arch/arm/mach-mmp/mmp2.c
+++ /dev/null
@@ -1,175 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-mmp/mmp2.c
- *
- * code name MMP2
- *
- * Copyright (C) 2009 Marvell International Ltd.
- */
-#include <linux/clk/mmp.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/irqchip/mmp.h>
-#include <linux/platform_device.h>
-
-#include <asm/hardware/cache-tauros2.h>
-
-#include <asm/mach/time.h>
-#include "addr-map.h"
-#include "regs-apbc.h"
-#include <linux/soc/mmp/cputype.h>
-#include "irqs.h"
-#include "mfp.h"
-#include "devices.h"
-#include "mmp2.h"
-#include "pm-mmp2.h"
-
-#include "common.h"
-
-#define MFPR_VIRT_BASE	(APB_VIRT_BASE + 0x1e000)
-
-static struct mfp_addr_map mmp2_addr_map[] __initdata = {
-
-	MFP_ADDR_X(GPIO0, GPIO58, 0x54),
-	MFP_ADDR_X(GPIO59, GPIO73, 0x280),
-	MFP_ADDR_X(GPIO74, GPIO101, 0x170),
-
-	MFP_ADDR(GPIO102, 0x0),
-	MFP_ADDR(GPIO103, 0x4),
-	MFP_ADDR(GPIO104, 0x1fc),
-	MFP_ADDR(GPIO105, 0x1f8),
-	MFP_ADDR(GPIO106, 0x1f4),
-	MFP_ADDR(GPIO107, 0x1f0),
-	MFP_ADDR(GPIO108, 0x21c),
-	MFP_ADDR(GPIO109, 0x218),
-	MFP_ADDR(GPIO110, 0x214),
-	MFP_ADDR(GPIO111, 0x200),
-	MFP_ADDR(GPIO112, 0x244),
-	MFP_ADDR(GPIO113, 0x25c),
-	MFP_ADDR(GPIO114, 0x164),
-	MFP_ADDR_X(GPIO115, GPIO122, 0x260),
-
-	MFP_ADDR(GPIO123, 0x148),
-	MFP_ADDR_X(GPIO124, GPIO141, 0xc),
-
-	MFP_ADDR(GPIO142, 0x8),
-	MFP_ADDR_X(GPIO143, GPIO151, 0x220),
-	MFP_ADDR_X(GPIO152, GPIO153, 0x248),
-	MFP_ADDR_X(GPIO154, GPIO155, 0x254),
-	MFP_ADDR_X(GPIO156, GPIO159, 0x14c),
-
-	MFP_ADDR(GPIO160, 0x250),
-	MFP_ADDR(GPIO161, 0x210),
-	MFP_ADDR(GPIO162, 0x20c),
-	MFP_ADDR(GPIO163, 0x208),
-	MFP_ADDR(GPIO164, 0x204),
-	MFP_ADDR(GPIO165, 0x1ec),
-	MFP_ADDR(GPIO166, 0x1e8),
-	MFP_ADDR(GPIO167, 0x1e4),
-	MFP_ADDR(GPIO168, 0x1e0),
-
-	MFP_ADDR_X(TWSI1_SCL, TWSI1_SDA, 0x140),
-	MFP_ADDR_X(TWSI4_SCL, TWSI4_SDA, 0x2bc),
-
-	MFP_ADDR(PMIC_INT, 0x2c4),
-	MFP_ADDR(CLK_REQ, 0x160),
-
-	MFP_ADDR_END,
-};
-
-void mmp2_clear_pmic_int(void)
-{
-	void __iomem *mfpr_pmic;
-	unsigned long data;
-
-	mfpr_pmic = APB_VIRT_BASE + 0x1e000 + 0x2c4;
-	data = __raw_readl(mfpr_pmic);
-	__raw_writel(data | (1 << 6), mfpr_pmic);
-	__raw_writel(data, mfpr_pmic);
-}
-
-void __init mmp2_init_irq(void)
-{
-	mmp2_init_icu();
-#ifdef CONFIG_PM
-	icu_irq_chip.irq_set_wake = mmp2_set_wake;
-#endif
-}
-
-static int __init mmp2_init(void)
-{
-	if (cpu_is_mmp2()) {
-#ifdef CONFIG_CACHE_TAUROS2
-		tauros2_init(0);
-#endif
-		mfp_init_base(MFPR_VIRT_BASE);
-		mfp_init_addr(mmp2_addr_map);
-		mmp2_clk_init(APB_PHYS_BASE + 0x50000,
-			      AXI_PHYS_BASE + 0x82800,
-			      APB_PHYS_BASE + 0x15000);
-	}
-
-	return 0;
-}
-postcore_initcall(mmp2_init);
-
-#define APBC_TIMERS	APBC_REG(0x024)
-
-void __init mmp2_timer_init(void)
-{
-	unsigned long clk_rst;
-
-	__raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
-
-	/*
-	 * enable bus/functional clock, enable 6.5MHz (divider 4),
-	 * release reset
-	 */
-	clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
-	__raw_writel(clk_rst, APBC_TIMERS);
-
-	mmp_timer_init(IRQ_MMP2_TIMER1, 6500000);
-}
-
-/* on-chip devices */
-MMP2_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4030000, 0x30, 4, 5);
-MMP2_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4017000, 0x30, 20, 21);
-MMP2_DEVICE(uart3, "pxa2xx-uart", 2, UART3, 0xd4018000, 0x30, 22, 23);
-MMP2_DEVICE(uart4, "pxa2xx-uart", 3, UART4, 0xd4016000, 0x30, 18, 19);
-MMP2_DEVICE(twsi1, "pxa2xx-i2c", 0, TWSI1, 0xd4011000, 0x70);
-MMP2_DEVICE(twsi2, "pxa2xx-i2c", 1, TWSI2, 0xd4031000, 0x70);
-MMP2_DEVICE(twsi3, "pxa2xx-i2c", 2, TWSI3, 0xd4032000, 0x70);
-MMP2_DEVICE(twsi4, "pxa2xx-i2c", 3, TWSI4, 0xd4033000, 0x70);
-MMP2_DEVICE(twsi5, "pxa2xx-i2c", 4, TWSI5, 0xd4033800, 0x70);
-MMP2_DEVICE(twsi6, "pxa2xx-i2c", 5, TWSI6, 0xd4034000, 0x70);
-MMP2_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x100, 28, 29);
-MMP2_DEVICE(sdh0, "sdhci-pxav3", 0, MMC, 0xd4280000, 0x120);
-MMP2_DEVICE(sdh1, "sdhci-pxav3", 1, MMC2, 0xd4280800, 0x120);
-MMP2_DEVICE(sdh2, "sdhci-pxav3", 2, MMC3, 0xd4281000, 0x120);
-MMP2_DEVICE(sdh3, "sdhci-pxav3", 3, MMC4, 0xd4281800, 0x120);
-MMP2_DEVICE(asram, "asram", -1, NONE, 0xe0000000, 0x4000);
-/* 0xd1000000 ~ 0xd101ffff is reserved for secure processor */
-MMP2_DEVICE(isram, "isram", -1, NONE, 0xd1020000, 0x18000);
-
-struct resource mmp2_resource_gpio[] = {
-	{
-		.start	= 0xd4019000,
-		.end	= 0xd4019fff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_MMP2_GPIO,
-		.end	= IRQ_MMP2_GPIO,
-		.name	= "gpio_mux",
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mmp2_device_gpio = {
-	.name		= "mmp2-gpio",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(mmp2_resource_gpio),
-	.resource	= mmp2_resource_gpio,
-};
diff --git a/arch/arm/mach-mmp/mmp2.h b/arch/arm/mach-mmp/mmp2.h
deleted file mode 100644
index 7f80b90248fb..000000000000
--- a/arch/arm/mach-mmp/mmp2.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_MMP2_H
-#define __ASM_MACH_MMP2_H
-
-#include <linux/platform_data/pxa_sdhci.h>
-
-extern void mmp2_timer_init(void);
-extern void __init mmp2_init_irq(void);
-extern void mmp2_clear_pmic_int(void);
-
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/platform_data/dma-mmp_tdma.h>
-#include <linux/irqchip/mmp.h>
-
-#include "devices.h"
-
-extern struct mmp_device_desc mmp2_device_uart1;
-extern struct mmp_device_desc mmp2_device_uart2;
-extern struct mmp_device_desc mmp2_device_uart3;
-extern struct mmp_device_desc mmp2_device_uart4;
-extern struct mmp_device_desc mmp2_device_twsi1;
-extern struct mmp_device_desc mmp2_device_twsi2;
-extern struct mmp_device_desc mmp2_device_twsi3;
-extern struct mmp_device_desc mmp2_device_twsi4;
-extern struct mmp_device_desc mmp2_device_twsi5;
-extern struct mmp_device_desc mmp2_device_twsi6;
-extern struct mmp_device_desc mmp2_device_sdh0;
-extern struct mmp_device_desc mmp2_device_sdh1;
-extern struct mmp_device_desc mmp2_device_sdh2;
-extern struct mmp_device_desc mmp2_device_sdh3;
-extern struct mmp_device_desc mmp2_device_asram;
-extern struct mmp_device_desc mmp2_device_isram;
-
-extern struct platform_device mmp2_device_gpio;
-
-static inline int mmp2_add_uart(int id)
-{
-	struct mmp_device_desc *d = NULL;
-
-	switch (id) {
-	case 1: d = &mmp2_device_uart1; break;
-	case 2: d = &mmp2_device_uart2; break;
-	case 3: d = &mmp2_device_uart3; break;
-	case 4: d = &mmp2_device_uart4; break;
-	default:
-		return -EINVAL;
-	}
-
-	return mmp_register_device(d, NULL, 0);
-}
-
-static inline int mmp2_add_twsi(int id, struct i2c_pxa_platform_data *data,
-				  struct i2c_board_info *info, unsigned size)
-{
-	struct mmp_device_desc *d = NULL;
-	int ret;
-
-	switch (id) {
-	case 1: d = &mmp2_device_twsi1; break;
-	case 2: d = &mmp2_device_twsi2; break;
-	case 3: d = &mmp2_device_twsi3; break;
-	case 4: d = &mmp2_device_twsi4; break;
-	case 5: d = &mmp2_device_twsi5; break;
-	case 6: d = &mmp2_device_twsi6; break;
-	default:
-		return -EINVAL;
-	}
-
-	ret = i2c_register_board_info(id - 1, info, size);
-	if (ret)
-		return ret;
-
-	return mmp_register_device(d, data, sizeof(*data));
-}
-
-static inline int mmp2_add_sdhost(int id, struct sdhci_pxa_platdata *data)
-{
-	struct mmp_device_desc *d = NULL;
-
-	switch (id) {
-	case 0: d = &mmp2_device_sdh0; break;
-	case 1: d = &mmp2_device_sdh1; break;
-	case 2: d = &mmp2_device_sdh2; break;
-	case 3: d = &mmp2_device_sdh3; break;
-	default:
-		return -EINVAL;
-	}
-
-	return mmp_register_device(d, data, sizeof(*data));
-}
-
-static inline int mmp2_add_asram(struct sram_platdata *data)
-{
-	return mmp_register_device(&mmp2_device_asram, data, sizeof(*data));
-}
-
-static inline int mmp2_add_isram(struct sram_platdata *data)
-{
-	return mmp_register_device(&mmp2_device_isram, data, sizeof(*data));
-}
-
-#endif /* __ASM_MACH_MMP2_H */
-
diff --git a/arch/arm/mach-mmp/pm-mmp2.c b/arch/arm/mach-mmp/pm-mmp2.c
deleted file mode 100644
index 7a6f74c32d42..000000000000
--- a/arch/arm/mach-mmp/pm-mmp2.c
+++ /dev/null
@@ -1,248 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * MMP2 Power Management Routines
- *
- * (C) Copyright 2012 Marvell International Ltd.
- * All Rights Reserved
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/time.h>
-#include <linux/delay.h>
-#include <linux/suspend.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <asm/mach-types.h>
-
-#include <linux/soc/mmp/cputype.h>
-#include "addr-map.h"
-#include "pm-mmp2.h"
-#include "regs-icu.h"
-#include "irqs.h"
-
-int mmp2_set_wake(struct irq_data *d, unsigned int on)
-{
-	unsigned long data = 0;
-	int irq = d->irq;
-
-	/* enable wakeup sources */
-	switch (irq) {
-	case IRQ_MMP2_RTC:
-	case IRQ_MMP2_RTC_ALARM:
-		data = MPMU_WUCRM_PJ_WAKEUP(4) | MPMU_WUCRM_PJ_RTC_ALARM;
-		break;
-	case IRQ_MMP2_PMIC:
-		data = MPMU_WUCRM_PJ_WAKEUP(7);
-		break;
-	case IRQ_MMP2_MMC2:
-		/* mmc use WAKEUP2, same as GPIO wakeup source */
-		data = MPMU_WUCRM_PJ_WAKEUP(2);
-		break;
-	}
-	if (on) {
-		if (data) {
-			data |= __raw_readl(MPMU_WUCRM_PJ);
-			__raw_writel(data, MPMU_WUCRM_PJ);
-		}
-	} else {
-		if (data) {
-			data = ~data & __raw_readl(MPMU_WUCRM_PJ);
-			__raw_writel(data, MPMU_WUCRM_PJ);
-		}
-	}
-	return 0;
-}
-
-static void pm_scu_clk_disable(void)
-{
-	unsigned int val;
-
-	/* close AXI fabric clock gate */
-	__raw_writel(0x0, CIU_REG(0x64));
-	__raw_writel(0x0, CIU_REG(0x68));
-
-	/* close MCB master clock gate */
-	val = __raw_readl(CIU_REG(0x1c));
-	val |= 0xf0;
-	__raw_writel(val, CIU_REG(0x1c));
-
-	return ;
-}
-
-static void pm_scu_clk_enable(void)
-{
-	unsigned int val;
-
-	/* open AXI fabric clock gate */
-	__raw_writel(0x03003003, CIU_REG(0x64));
-	__raw_writel(0x00303030, CIU_REG(0x68));
-
-	/* open MCB master clock gate */
-	val = __raw_readl(CIU_REG(0x1c));
-	val &= ~(0xf0);
-	__raw_writel(val, CIU_REG(0x1c));
-
-	return ;
-}
-
-static void pm_mpmu_clk_disable(void)
-{
-	/*
-	 * disable clocks in MPMU_CGR_PJ register
-	 * except clock for APMU_PLL1, APMU_PLL1_2 and AP_26M
-	 */
-	__raw_writel(0x0000a010, MPMU_CGR_PJ);
-}
-
-static void pm_mpmu_clk_enable(void)
-{
-	unsigned int val;
-
-	__raw_writel(0xdffefffe, MPMU_CGR_PJ);
-	val = __raw_readl(MPMU_PLL2_CTRL1);
-	val |= (1 << 29);
-	__raw_writel(val, MPMU_PLL2_CTRL1);
-
-	return ;
-}
-
-void mmp2_pm_enter_lowpower_mode(int state)
-{
-	uint32_t idle_cfg, apcr;
-
-	idle_cfg = __raw_readl(APMU_PJ_IDLE_CFG);
-	apcr = __raw_readl(MPMU_PCR_PJ);
-	apcr &= ~(MPMU_PCR_PJ_SLPEN | MPMU_PCR_PJ_DDRCORSD | MPMU_PCR_PJ_APBSD
-		 | MPMU_PCR_PJ_AXISD | MPMU_PCR_PJ_VCTCXOSD | (1 << 13));
-	idle_cfg &= ~APMU_PJ_IDLE_CFG_PJ_IDLE;
-
-	switch (state) {
-	case POWER_MODE_SYS_SLEEP:
-		apcr |= MPMU_PCR_PJ_SLPEN;		/* set the SLPEN bit */
-		apcr |= MPMU_PCR_PJ_VCTCXOSD;		/* set VCTCXOSD */
-		fallthrough;
-	case POWER_MODE_CHIP_SLEEP:
-		apcr |= MPMU_PCR_PJ_SLPEN;
-		fallthrough;
-	case POWER_MODE_APPS_SLEEP:
-		apcr |= MPMU_PCR_PJ_APBSD;		/* set APBSD */
-		fallthrough;
-	case POWER_MODE_APPS_IDLE:
-		apcr |= MPMU_PCR_PJ_AXISD;		/* set AXISDD bit */
-		apcr |= MPMU_PCR_PJ_DDRCORSD;		/* set DDRCORSD bit */
-		idle_cfg |= APMU_PJ_IDLE_CFG_PJ_PWRDWN;	/* PJ power down */
-		apcr |= MPMU_PCR_PJ_SPSD;
-		fallthrough;
-	case POWER_MODE_CORE_EXTIDLE:
-		idle_cfg |= APMU_PJ_IDLE_CFG_PJ_IDLE;	/* set the IDLE bit */
-		idle_cfg &= ~APMU_PJ_IDLE_CFG_ISO_MODE_CNTRL_MASK;
-		idle_cfg |= APMU_PJ_IDLE_CFG_PWR_SW(3)
-			| APMU_PJ_IDLE_CFG_L2_PWR_SW;
-		break;
-	case POWER_MODE_CORE_INTIDLE:
-		apcr &= ~MPMU_PCR_PJ_SPSD;
-		break;
-	}
-
-	/* set reserve bits */
-	apcr |= (1 << 30) | (1 << 25);
-
-	/* finally write the registers back */
-	__raw_writel(idle_cfg, APMU_PJ_IDLE_CFG);
-	__raw_writel(apcr, MPMU_PCR_PJ);	/* 0xfe086000 */
-}
-
-static int mmp2_pm_enter(suspend_state_t state)
-{
-	int temp;
-
-	temp = __raw_readl(MMP2_ICU_INT4_MASK);
-	if (temp & (1 << 1)) {
-		printk(KERN_ERR "%s: PMIC interrupt is handling\n", __func__);
-		return -EAGAIN;
-	}
-
-	temp = __raw_readl(APMU_SRAM_PWR_DWN);
-	temp |= ((1 << 19) | (1 << 18));
-	__raw_writel(temp, APMU_SRAM_PWR_DWN);
-	pm_mpmu_clk_disable();
-	pm_scu_clk_disable();
-
-	printk(KERN_INFO "%s: before suspend\n", __func__);
-	cpu_do_idle();
-	printk(KERN_INFO "%s: after suspend\n", __func__);
-
-	pm_mpmu_clk_enable();		/* enable clocks in MPMU */
-	pm_scu_clk_enable();		/* enable clocks in SCU */
-
-	return 0;
-}
-
-/*
- * Called after processes are frozen, but before we shut down devices.
- */
-static int mmp2_pm_prepare(void)
-{
-	mmp2_pm_enter_lowpower_mode(POWER_MODE_SYS_SLEEP);
-
-	return 0;
-}
-
-/*
- * Called after devices are re-setup, but before processes are thawed.
- */
-static void mmp2_pm_finish(void)
-{
-	mmp2_pm_enter_lowpower_mode(POWER_MODE_CORE_INTIDLE);
-}
-
-static int mmp2_pm_valid(suspend_state_t state)
-{
-	return ((state == PM_SUSPEND_STANDBY) || (state == PM_SUSPEND_MEM));
-}
-
-/*
- * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk.
- */
-static const struct platform_suspend_ops mmp2_pm_ops = {
-	.valid		= mmp2_pm_valid,
-	.prepare	= mmp2_pm_prepare,
-	.enter		= mmp2_pm_enter,
-	.finish		= mmp2_pm_finish,
-};
-
-static int __init mmp2_pm_init(void)
-{
-	uint32_t apcr;
-
-	if (!cpu_is_mmp2())
-		return -EIO;
-
-	suspend_set_ops(&mmp2_pm_ops);
-
-	/*
-	 * Set bit 0, Slow clock Select 32K clock input instead of VCXO
-	 * VCXO is chosen by default, which would be disabled in suspend
-	 */
-	__raw_writel(0x5, MPMU_SCCR);
-
-	/*
-	 * Clear bit 23 of CIU_CPU_CONF
-	 * direct PJ4 to DDR access through Memory Controller slow queue
-	 * fast queue has issue and cause lcd will flick
-	 */
-	__raw_writel(__raw_readl(CIU_REG(0x8)) & ~(0x1 << 23), CIU_REG(0x8));
-
-	/* Clear default low power control bit */
-	apcr = __raw_readl(MPMU_PCR_PJ);
-	apcr &= ~(MPMU_PCR_PJ_SLPEN | MPMU_PCR_PJ_DDRCORSD
-			| MPMU_PCR_PJ_APBSD | MPMU_PCR_PJ_AXISD | 1 << 13);
-	__raw_writel(apcr, MPMU_PCR_PJ);
-
-	return 0;
-}
-
-late_initcall(mmp2_pm_init);
diff --git a/arch/arm/mach-mmp/pm-mmp2.h b/arch/arm/mach-mmp/pm-mmp2.h
deleted file mode 100644
index 70299a9450d3..000000000000
--- a/arch/arm/mach-mmp/pm-mmp2.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * MMP2 Power Management Routines
- *
- * (C) Copyright 2010 Marvell International Ltd.
- * All Rights Reserved
- */
-
-#ifndef __MMP2_PM_H__
-#define __MMP2_PM_H__
-
-#include "addr-map.h"
-
-#define APMU_PJ_IDLE_CFG			APMU_REG(0x018)
-#define APMU_PJ_IDLE_CFG_PJ_IDLE		(1 << 1)
-#define APMU_PJ_IDLE_CFG_PJ_PWRDWN		(1 << 5)
-#define APMU_PJ_IDLE_CFG_PWR_SW(x)		((x) << 16)
-#define APMU_PJ_IDLE_CFG_L2_PWR_SW		(1 << 19)
-#define APMU_PJ_IDLE_CFG_ISO_MODE_CNTRL_MASK	(3 << 28)
-
-#define APMU_SRAM_PWR_DWN			APMU_REG(0x08c)
-
-#define MPMU_SCCR				MPMU_REG(0x038)
-#define MPMU_PCR_PJ				MPMU_REG(0x1000)
-#define MPMU_PCR_PJ_AXISD			(1 << 31)
-#define MPMU_PCR_PJ_SLPEN			(1 << 29)
-#define MPMU_PCR_PJ_SPSD			(1 << 28)
-#define MPMU_PCR_PJ_DDRCORSD			(1 << 27)
-#define MPMU_PCR_PJ_APBSD			(1 << 26)
-#define MPMU_PCR_PJ_INTCLR			(1 << 24)
-#define MPMU_PCR_PJ_SLPWP0			(1 << 23)
-#define MPMU_PCR_PJ_SLPWP1			(1 << 22)
-#define MPMU_PCR_PJ_SLPWP2			(1 << 21)
-#define MPMU_PCR_PJ_SLPWP3			(1 << 20)
-#define MPMU_PCR_PJ_VCTCXOSD			(1 << 19)
-#define MPMU_PCR_PJ_SLPWP4			(1 << 18)
-#define MPMU_PCR_PJ_SLPWP5			(1 << 17)
-#define MPMU_PCR_PJ_SLPWP6			(1 << 16)
-#define MPMU_PCR_PJ_SLPWP7			(1 << 15)
-
-#define MPMU_PLL2_CTRL1				MPMU_REG(0x0414)
-#define MPMU_CGR_PJ				MPMU_REG(0x1024)
-#define MPMU_WUCRM_PJ				MPMU_REG(0x104c)
-#define MPMU_WUCRM_PJ_WAKEUP(x)			(1 << (x))
-#define MPMU_WUCRM_PJ_RTC_ALARM			(1 << 17)
-
-enum {
-	POWER_MODE_ACTIVE = 0,
-	POWER_MODE_CORE_INTIDLE,
-	POWER_MODE_CORE_EXTIDLE,
-	POWER_MODE_APPS_IDLE,
-	POWER_MODE_APPS_SLEEP,
-	POWER_MODE_CHIP_SLEEP,
-	POWER_MODE_SYS_SLEEP,
-};
-
-extern void mmp2_pm_enter_lowpower_mode(int state);
-extern int mmp2_set_wake(struct irq_data *d, unsigned int on);
-#endif
diff --git a/arch/arm/mach-mmp/pm-pxa910.c b/arch/arm/mach-mmp/pm-pxa910.c
deleted file mode 100644
index 1d71d73c1862..000000000000
--- a/arch/arm/mach-mmp/pm-pxa910.c
+++ /dev/null
@@ -1,272 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * PXA910 Power Management Routines
- *
- * (C) Copyright 2009 Marvell International Ltd.
- * All Rights Reserved
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/time.h>
-#include <linux/delay.h>
-#include <linux/suspend.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <asm/mach-types.h>
-#include <asm/outercache.h>
-
-#include <linux/soc/mmp/cputype.h>
-#include "addr-map.h"
-#include "pm-pxa910.h"
-#include "regs-icu.h"
-#include "irqs.h"
-
-int pxa910_set_wake(struct irq_data *data, unsigned int on)
-{
-	uint32_t awucrm = 0, apcr = 0;
-	int irq = data->irq;
-
-	/* setting wakeup sources */
-	switch (irq) {
-	/* wakeup line 2 */
-	case IRQ_PXA910_AP_GPIO:
-		awucrm = MPMU_AWUCRM_WAKEUP(2);
-		apcr |= MPMU_APCR_SLPWP2;
-		break;
-	/* wakeup line 3 */
-	case IRQ_PXA910_KEYPAD:
-		awucrm = MPMU_AWUCRM_WAKEUP(3) | MPMU_AWUCRM_KEYPRESS;
-		apcr |= MPMU_APCR_SLPWP3;
-		break;
-	case IRQ_PXA910_ROTARY:
-		awucrm = MPMU_AWUCRM_WAKEUP(3) | MPMU_AWUCRM_NEWROTARY;
-		apcr |= MPMU_APCR_SLPWP3;
-		break;
-	case IRQ_PXA910_TRACKBALL:
-		awucrm = MPMU_AWUCRM_WAKEUP(3) | MPMU_AWUCRM_TRACKBALL;
-		apcr |= MPMU_APCR_SLPWP3;
-		break;
-	/* wakeup line 4 */
-	case IRQ_PXA910_AP1_TIMER1:
-		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP1_TIMER_1;
-		apcr |= MPMU_APCR_SLPWP4;
-		break;
-	case IRQ_PXA910_AP1_TIMER2:
-		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP1_TIMER_2;
-		apcr |= MPMU_APCR_SLPWP4;
-		break;
-	case IRQ_PXA910_AP1_TIMER3:
-		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP1_TIMER_3;
-		apcr |= MPMU_APCR_SLPWP4;
-		break;
-	case IRQ_PXA910_AP2_TIMER1:
-		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP2_TIMER_1;
-		apcr |= MPMU_APCR_SLPWP4;
-		break;
-	case IRQ_PXA910_AP2_TIMER2:
-		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP2_TIMER_2;
-		apcr |= MPMU_APCR_SLPWP4;
-		break;
-	case IRQ_PXA910_AP2_TIMER3:
-		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP2_TIMER_3;
-		apcr |= MPMU_APCR_SLPWP4;
-		break;
-	case IRQ_PXA910_RTC_ALARM:
-		awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_RTC_ALARM;
-		apcr |= MPMU_APCR_SLPWP4;
-		break;
-	/* wakeup line 5 */
-	case IRQ_PXA910_USB1:
-	case IRQ_PXA910_USB2:
-		awucrm = MPMU_AWUCRM_WAKEUP(5);
-		apcr |= MPMU_APCR_SLPWP5;
-		break;
-	/* wakeup line 6 */
-	case IRQ_PXA910_MMC:
-		awucrm = MPMU_AWUCRM_WAKEUP(6)
-			| MPMU_AWUCRM_SDH1
-			| MPMU_AWUCRM_SDH2;
-		apcr |= MPMU_APCR_SLPWP6;
-		break;
-	/* wakeup line 7 */
-	case IRQ_PXA910_PMIC_INT:
-		awucrm = MPMU_AWUCRM_WAKEUP(7);
-		apcr |= MPMU_APCR_SLPWP7;
-		break;
-	default:
-		if (irq >= IRQ_GPIO_START && irq < IRQ_BOARD_START) {
-			awucrm = MPMU_AWUCRM_WAKEUP(2);
-			apcr |= MPMU_APCR_SLPWP2;
-		} else {
-			/* FIXME: This should return a proper error code ! */
-			printk(KERN_ERR "Error: no defined wake up source irq: %d\n",
-				irq);
-		}
-	}
-
-	if (on) {
-		if (awucrm) {
-			awucrm |= __raw_readl(MPMU_AWUCRM);
-			__raw_writel(awucrm, MPMU_AWUCRM);
-		}
-		if (apcr) {
-			apcr = ~apcr & __raw_readl(MPMU_APCR);
-			__raw_writel(apcr, MPMU_APCR);
-		}
-	} else {
-		if (awucrm) {
-			awucrm = ~awucrm & __raw_readl(MPMU_AWUCRM);
-			__raw_writel(awucrm, MPMU_AWUCRM);
-		}
-		if (apcr) {
-			apcr |= __raw_readl(MPMU_APCR);
-			__raw_writel(apcr, MPMU_APCR);
-		}
-	}
-	return 0;
-}
-
-void pxa910_pm_enter_lowpower_mode(int state)
-{
-	uint32_t idle_cfg, apcr;
-
-	idle_cfg = __raw_readl(APMU_MOH_IDLE_CFG);
-	apcr = __raw_readl(MPMU_APCR);
-
-	apcr &= ~(MPMU_APCR_DDRCORSD | MPMU_APCR_APBSD | MPMU_APCR_AXISD
-		| MPMU_APCR_VCTCXOSD | MPMU_APCR_STBYEN);
-	idle_cfg &= ~(APMU_MOH_IDLE_CFG_MOH_IDLE
-		| APMU_MOH_IDLE_CFG_MOH_PWRDWN);
-
-	switch (state) {
-	case POWER_MODE_UDR:
-		/* only shutdown APB in UDR */
-		apcr |= MPMU_APCR_STBYEN | MPMU_APCR_APBSD;
-		fallthrough;
-	case POWER_MODE_SYS_SLEEP:
-		apcr |= MPMU_APCR_SLPEN;		/* set the SLPEN bit */
-		apcr |= MPMU_APCR_VCTCXOSD;		/* set VCTCXOSD */
-		fallthrough;
-	case POWER_MODE_APPS_SLEEP:
-		apcr |= MPMU_APCR_DDRCORSD;		/* set DDRCORSD */
-		fallthrough;
-	case POWER_MODE_APPS_IDLE:
-		apcr |= MPMU_APCR_AXISD;		/* set AXISDD bit */
-		fallthrough;
-	case POWER_MODE_CORE_EXTIDLE:
-		idle_cfg |= APMU_MOH_IDLE_CFG_MOH_IDLE;
-		idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWRDWN;
-		idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWR_SW(3)
-			| APMU_MOH_IDLE_CFG_MOH_L2_PWR_SW(3);
-		fallthrough;
-	case POWER_MODE_CORE_INTIDLE:
-		break;
-	}
-
-	/* program the memory controller hardware sleep type and auto wakeup */
-	idle_cfg |= APMU_MOH_IDLE_CFG_MOH_DIS_MC_SW_REQ;
-	idle_cfg |= APMU_MOH_IDLE_CFG_MOH_MC_WAKE_EN;
-	__raw_writel(0x0, APMU_MC_HW_SLP_TYPE);		/* auto refresh */
-
-	/* set DSPSD, DTCMSD, BBSD, MSASLPEN */
-	apcr |= MPMU_APCR_DSPSD | MPMU_APCR_DTCMSD | MPMU_APCR_BBSD
-		| MPMU_APCR_MSASLPEN;
-
-	/*always set SLEPEN bit mainly for MSA*/
-	apcr |= MPMU_APCR_SLPEN;
-
-	/* finally write the registers back */
-	__raw_writel(idle_cfg, APMU_MOH_IDLE_CFG);
-	__raw_writel(apcr, MPMU_APCR);
-
-}
-
-static int pxa910_pm_enter(suspend_state_t state)
-{
-	unsigned int idle_cfg, reg = 0;
-
-	/*pmic thread not completed,exit;otherwise system can't be waked up*/
-	reg = __raw_readl(ICU_INT_CONF(IRQ_PXA910_PMIC_INT));
-	if ((reg & 0x3) == 0)
-		return -EAGAIN;
-
-	idle_cfg = __raw_readl(APMU_MOH_IDLE_CFG);
-	idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWRDWN
-		| APMU_MOH_IDLE_CFG_MOH_SRAM_PWRDWN;
-	__raw_writel(idle_cfg, APMU_MOH_IDLE_CFG);
-
-	/* disable L2 */
-	outer_disable();
-	/* wait for l2 idle */
-	while (!(readl(CIU_REG(0x8)) & (1 << 16)))
-		udelay(1);
-
-	cpu_do_idle();
-
-	/* enable L2 */
-	outer_resume();
-	/* wait for l2 idle */
-	while (!(readl(CIU_REG(0x8)) & (1 << 16)))
-		udelay(1);
-
-	idle_cfg = __raw_readl(APMU_MOH_IDLE_CFG);
-	idle_cfg &= ~(APMU_MOH_IDLE_CFG_MOH_PWRDWN
-		| APMU_MOH_IDLE_CFG_MOH_SRAM_PWRDWN);
-	__raw_writel(idle_cfg, APMU_MOH_IDLE_CFG);
-
-	return 0;
-}
-
-/*
- * Called after processes are frozen, but before we shut down devices.
- */
-static int pxa910_pm_prepare(void)
-{
-	pxa910_pm_enter_lowpower_mode(POWER_MODE_UDR);
-	return 0;
-}
-
-/*
- * Called after devices are re-setup, but before processes are thawed.
- */
-static void pxa910_pm_finish(void)
-{
-	pxa910_pm_enter_lowpower_mode(POWER_MODE_CORE_INTIDLE);
-}
-
-static int pxa910_pm_valid(suspend_state_t state)
-{
-	return ((state == PM_SUSPEND_STANDBY) || (state == PM_SUSPEND_MEM));
-}
-
-static const struct platform_suspend_ops pxa910_pm_ops = {
-	.valid		= pxa910_pm_valid,
-	.prepare	= pxa910_pm_prepare,
-	.enter		= pxa910_pm_enter,
-	.finish		= pxa910_pm_finish,
-};
-
-static int __init pxa910_pm_init(void)
-{
-	uint32_t awucrm = 0;
-
-	if (!cpu_is_pxa910())
-		return -EIO;
-
-	suspend_set_ops(&pxa910_pm_ops);
-
-	/* Set the following bits for MMP3 playback with VCTXO on */
-	__raw_writel(__raw_readl(APMU_SQU_CLK_GATE_CTRL) | (1 << 30),
-		APMU_SQU_CLK_GATE_CTRL);
-	__raw_writel(__raw_readl(MPMU_FCCR) | (1 << 28), MPMU_FCCR);
-
-	awucrm |= MPMU_AWUCRM_AP_ASYNC_INT | MPMU_AWUCRM_AP_FULL_IDLE;
-	__raw_writel(awucrm, MPMU_AWUCRM);
-
-	return 0;
-}
-
-late_initcall(pxa910_pm_init);
diff --git a/arch/arm/mach-mmp/pm-pxa910.h b/arch/arm/mach-mmp/pm-pxa910.h
deleted file mode 100644
index 8e6344adaf51..000000000000
--- a/arch/arm/mach-mmp/pm-pxa910.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * PXA910 Power Management Routines
- *
- * (C) Copyright 2009 Marvell International Ltd.
- * All Rights Reserved
- */
-
-#ifndef __PXA910_PM_H__
-#define __PXA910_PM_H__
-
-#define APMU_MOH_IDLE_CFG			APMU_REG(0x0018)
-#define APMU_MOH_IDLE_CFG_MOH_IDLE		(1 << 1)
-#define APMU_MOH_IDLE_CFG_MOH_PWRDWN		(1 << 5)
-#define APMU_MOH_IDLE_CFG_MOH_SRAM_PWRDWN	(1 << 6)
-#define APMU_MOH_IDLE_CFG_MOH_PWR_SW(x)		(((x) & 0x3) << 16)
-#define APMU_MOH_IDLE_CFG_MOH_L2_PWR_SW(x)	(((x) & 0x3) << 18)
-#define APMU_MOH_IDLE_CFG_MOH_DIS_MC_SW_REQ	(1 << 21)
-#define APMU_MOH_IDLE_CFG_MOH_MC_WAKE_EN	(1 << 20)
-
-#define APMU_SQU_CLK_GATE_CTRL			APMU_REG(0x001c)
-#define APMU_MC_HW_SLP_TYPE			APMU_REG(0x00b0)
-
-#define MPMU_FCCR				MPMU_REG(0x0008)
-#define MPMU_APCR				MPMU_REG(0x1000)
-#define MPMU_APCR_AXISD				(1 << 31)
-#define MPMU_APCR_DSPSD				(1 << 30)
-#define MPMU_APCR_SLPEN				(1 << 29)
-#define MPMU_APCR_DTCMSD			(1 << 28)
-#define MPMU_APCR_DDRCORSD			(1 << 27)
-#define MPMU_APCR_APBSD				(1 << 26)
-#define MPMU_APCR_BBSD				(1 << 25)
-#define MPMU_APCR_SLPWP0			(1 << 23)
-#define MPMU_APCR_SLPWP1			(1 << 22)
-#define MPMU_APCR_SLPWP2			(1 << 21)
-#define MPMU_APCR_SLPWP3			(1 << 20)
-#define MPMU_APCR_VCTCXOSD			(1 << 19)
-#define MPMU_APCR_SLPWP4			(1 << 18)
-#define MPMU_APCR_SLPWP5			(1 << 17)
-#define MPMU_APCR_SLPWP6			(1 << 16)
-#define MPMU_APCR_SLPWP7			(1 << 15)
-#define MPMU_APCR_MSASLPEN			(1 << 14)
-#define MPMU_APCR_STBYEN			(1 << 13)
-
-#define MPMU_AWUCRM				MPMU_REG(0x104c)
-#define MPMU_AWUCRM_AP_ASYNC_INT		(1 << 25)
-#define MPMU_AWUCRM_AP_FULL_IDLE		(1 << 24)
-#define MPMU_AWUCRM_SDH1			(1 << 23)
-#define MPMU_AWUCRM_SDH2			(1 << 22)
-#define MPMU_AWUCRM_KEYPRESS			(1 << 21)
-#define MPMU_AWUCRM_TRACKBALL			(1 << 20)
-#define MPMU_AWUCRM_NEWROTARY			(1 << 19)
-#define MPMU_AWUCRM_RTC_ALARM			(1 << 17)
-#define MPMU_AWUCRM_AP2_TIMER_3			(1 << 13)
-#define MPMU_AWUCRM_AP2_TIMER_2			(1 << 12)
-#define MPMU_AWUCRM_AP2_TIMER_1			(1 << 11)
-#define MPMU_AWUCRM_AP1_TIMER_3			(1 << 10)
-#define MPMU_AWUCRM_AP1_TIMER_2			(1 << 9)
-#define MPMU_AWUCRM_AP1_TIMER_1			(1 << 8)
-#define MPMU_AWUCRM_WAKEUP(x)			(1 << ((x) & 0x7))
-
-enum {
-	POWER_MODE_ACTIVE = 0,
-	POWER_MODE_CORE_INTIDLE,
-	POWER_MODE_CORE_EXTIDLE,
-	POWER_MODE_APPS_IDLE,
-	POWER_MODE_APPS_SLEEP,
-	POWER_MODE_SYS_SLEEP,
-	POWER_MODE_HIBERNATE,
-	POWER_MODE_UDR,
-};
-
-extern int pxa910_set_wake(struct irq_data *data, unsigned int on);
-
-#endif
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
deleted file mode 100644
index 1e9389245d0e..000000000000
--- a/arch/arm/mach-mmp/pxa168.c
+++ /dev/null
@@ -1,175 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/pxa168.c
- *
- *  Code specific to PXA168
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/clk/mmp.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/mv_usb.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/mach/time.h>
-#include <asm/system_misc.h>
-
-#include "addr-map.h"
-#include "common.h"
-#include <linux/soc/mmp/cputype.h>
-#include "devices.h"
-#include "irqs.h"
-#include "mfp.h"
-#include "pxa168.h"
-#include "regs-apbc.h"
-#include "regs-apmu.h"
-#include "regs-usb.h"
-
-#define MFPR_VIRT_BASE	(APB_VIRT_BASE + 0x1e000)
-
-static struct mfp_addr_map pxa168_mfp_addr_map[] __initdata =
-{
-	MFP_ADDR_X(GPIO0,   GPIO36,  0x04c),
-	MFP_ADDR_X(GPIO37,  GPIO55,  0x000),
-	MFP_ADDR_X(GPIO56,  GPIO123, 0x0e0),
-	MFP_ADDR_X(GPIO124, GPIO127, 0x0f4),
-
-	MFP_ADDR_END,
-};
-
-void __init pxa168_init_irq(void)
-{
-	icu_init_irq();
-}
-
-static int __init pxa168_init(void)
-{
-	if (cpu_is_pxa168()) {
-		mfp_init_base(MFPR_VIRT_BASE);
-		mfp_init_addr(pxa168_mfp_addr_map);
-		pxa168_clk_init(APB_PHYS_BASE + 0x50000,
-				AXI_PHYS_BASE + 0x82800,
-				APB_PHYS_BASE + 0x15000);
-	}
-
-	return 0;
-}
-postcore_initcall(pxa168_init);
-
-/* system timer - clock enabled, 3.25MHz */
-#define TIMER_CLK_RST	(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
-#define APBC_TIMERS	APBC_REG(0x34)
-
-void __init pxa168_timer_init(void)
-{
-	/* this is early, we have to initialize the CCU registers by
-	 * ourselves instead of using clk_* API. Clock rate is defined
-	 * by APBC_TIMERS_CLK_RST (3.25MHz) and enabled free-running
-	 */
-	__raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
-
-	/* 3.25MHz, bus/functional clock enabled, release reset */
-	__raw_writel(TIMER_CLK_RST, APBC_TIMERS);
-
-	mmp_timer_init(IRQ_PXA168_TIMER1, 3250000);
-}
-
-void pxa168_clear_keypad_wakeup(void)
-{
-	uint32_t val;
-	uint32_t mask = APMU_PXA168_KP_WAKE_CLR;
-
-	/* wake event clear is needed in order to clear keypad interrupt */
-	val = __raw_readl(APMU_WAKE_CLR);
-	__raw_writel(val |  mask, APMU_WAKE_CLR);
-}
-
-/* on-chip devices */
-PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22);
-PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24);
-PXA168_DEVICE(uart3, "pxa2xx-uart", 2, UART3, 0xd4026000, 0x30, 23, 24);
-PXA168_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
-PXA168_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
-PXA168_DEVICE(pwm1, "pxa168-pwm", 0, NONE, 0xd401a000, 0x10);
-PXA168_DEVICE(pwm2, "pxa168-pwm", 1, NONE, 0xd401a400, 0x10);
-PXA168_DEVICE(pwm3, "pxa168-pwm", 2, NONE, 0xd401a800, 0x10);
-PXA168_DEVICE(pwm4, "pxa168-pwm", 3, NONE, 0xd401ac00, 0x10);
-PXA168_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
-PXA168_DEVICE(ssp1, "pxa168-ssp", 0, SSP1, 0xd401b000, 0x40, 52, 53);
-PXA168_DEVICE(ssp2, "pxa168-ssp", 1, SSP2, 0xd401c000, 0x40, 54, 55);
-PXA168_DEVICE(ssp3, "pxa168-ssp", 2, SSP3, 0xd401f000, 0x40, 56, 57);
-PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4, 0xd4020000, 0x40, 58, 59);
-PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61);
-PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8);
-PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c);
-PXA168_DEVICE(eth, "pxa168-eth", -1, MFU, 0xc0800000, 0x0fff);
-
-struct resource pxa168_resource_gpio[] = {
-	{
-		.start	= 0xd4019000,
-		.end	= 0xd4019fff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_PXA168_GPIOX,
-		.end	= IRQ_PXA168_GPIOX,
-		.name	= "gpio_mux",
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa168_device_gpio = {
-	.name		= "mmp-gpio",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pxa168_resource_gpio),
-	.resource	= pxa168_resource_gpio,
-};
-
-struct resource pxa168_usb_host_resources[] = {
-	/* USB Host conroller register base */
-	[0] = {
-		.start	= PXA168_U2H_REGBASE + U2x_CAPREGS_OFFSET,
-		.end	= PXA168_U2H_REGBASE + USB_REG_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "capregs",
-	},
-	/* USB PHY register base */
-	[1] = {
-		.start	= PXA168_U2H_PHYBASE,
-		.end	= PXA168_U2H_PHYBASE + USB_PHY_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "phyregs",
-	},
-	[2] = {
-		.start	= IRQ_PXA168_USB2,
-		.end	= IRQ_PXA168_USB2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 pxa168_usb_host_dmamask = DMA_BIT_MASK(32);
-struct platform_device pxa168_device_usb_host = {
-	.name = "pxa-sph",
-	.id   = -1,
-	.dev  = {
-		.dma_mask = &pxa168_usb_host_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-
-	.num_resources = ARRAY_SIZE(pxa168_usb_host_resources),
-	.resource      = pxa168_usb_host_resources,
-};
-
-int __init pxa168_add_usb_host(struct mv_usb_platform_data *pdata)
-{
-	pxa168_device_usb_host.dev.platform_data = pdata;
-	return platform_device_register(&pxa168_device_usb_host);
-}
-
-void pxa168_restart(enum reboot_mode mode, const char *cmd)
-{
-	soft_restart(0xffff0000);
-}
diff --git a/arch/arm/mach-mmp/pxa168.h b/arch/arm/mach-mmp/pxa168.h
deleted file mode 100644
index c1547e098f09..000000000000
--- a/arch/arm/mach-mmp/pxa168.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_PXA168_H
-#define __ASM_MACH_PXA168_H
-
-#include <linux/reboot.h>
-
-extern void pxa168_timer_init(void);
-extern void __init pxa168_init_irq(void);
-extern void pxa168_restart(enum reboot_mode, const char *);
-extern void pxa168_clear_keypad_wakeup(void);
-
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/platform_data/mtd-nand-pxa3xx.h>
-#include <video/pxa168fb.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include <linux/pxa168_eth.h>
-#include <linux/platform_data/mv_usb.h>
-#include <linux/soc/mmp/cputype.h>
-#include <linux/irqchip/mmp.h>
-
-#include "devices.h"
-
-extern struct mmp_device_desc pxa168_device_uart1;
-extern struct mmp_device_desc pxa168_device_uart2;
-extern struct mmp_device_desc pxa168_device_uart3;
-extern struct mmp_device_desc pxa168_device_twsi0;
-extern struct mmp_device_desc pxa168_device_twsi1;
-extern struct mmp_device_desc pxa168_device_pwm1;
-extern struct mmp_device_desc pxa168_device_pwm2;
-extern struct mmp_device_desc pxa168_device_pwm3;
-extern struct mmp_device_desc pxa168_device_pwm4;
-extern struct mmp_device_desc pxa168_device_ssp1;
-extern struct mmp_device_desc pxa168_device_ssp2;
-extern struct mmp_device_desc pxa168_device_ssp3;
-extern struct mmp_device_desc pxa168_device_ssp4;
-extern struct mmp_device_desc pxa168_device_ssp5;
-extern struct mmp_device_desc pxa168_device_nand;
-extern struct mmp_device_desc pxa168_device_fb;
-extern struct mmp_device_desc pxa168_device_keypad;
-extern struct mmp_device_desc pxa168_device_eth;
-
-/* pdata can be NULL */
-extern int __init pxa168_add_usb_host(struct mv_usb_platform_data *pdata);
-
-
-extern struct platform_device pxa168_device_gpio;
-
-static inline int pxa168_add_uart(int id)
-{
-	struct mmp_device_desc *d = NULL;
-
-	switch (id) {
-	case 1: d = &pxa168_device_uart1; break;
-	case 2: d = &pxa168_device_uart2; break;
-	case 3: d = &pxa168_device_uart3; break;
-	}
-
-	if (d == NULL)
-		return -EINVAL;
-
-	return mmp_register_device(d, NULL, 0);
-}
-
-static inline int pxa168_add_twsi(int id, struct i2c_pxa_platform_data *data,
-				  struct i2c_board_info *info, unsigned size)
-{
-	struct mmp_device_desc *d = NULL;
-	int ret;
-
-	switch (id) {
-	case 0: d = &pxa168_device_twsi0; break;
-	case 1: d = &pxa168_device_twsi1; break;
-	default:
-		return -EINVAL;
-	}
-
-	ret = i2c_register_board_info(id, info, size);
-	if (ret)
-		return ret;
-
-	return mmp_register_device(d, data, sizeof(*data));
-}
-
-static inline int pxa168_add_pwm(int id)
-{
-	struct mmp_device_desc *d = NULL;
-
-	switch (id) {
-	case 1: d = &pxa168_device_pwm1; break;
-	case 2: d = &pxa168_device_pwm2; break;
-	case 3: d = &pxa168_device_pwm3; break;
-	case 4: d = &pxa168_device_pwm4; break;
-	default:
-		return -EINVAL;
-	}
-
-	return mmp_register_device(d, NULL, 0);
-}
-
-static inline int pxa168_add_ssp(int id)
-{
-	struct mmp_device_desc *d = NULL;
-
-	switch (id) {
-	case 1: d = &pxa168_device_ssp1; break;
-	case 2: d = &pxa168_device_ssp2; break;
-	case 3: d = &pxa168_device_ssp3; break;
-	case 4: d = &pxa168_device_ssp4; break;
-	case 5: d = &pxa168_device_ssp5; break;
-	default:
-		return -EINVAL;
-	}
-	return mmp_register_device(d, NULL, 0);
-}
-
-static inline int pxa168_add_nand(struct pxa3xx_nand_platform_data *info)
-{
-	return mmp_register_device(&pxa168_device_nand, info, sizeof(*info));
-}
-
-static inline int pxa168_add_fb(struct pxa168fb_mach_info *mi)
-{
-	return mmp_register_device(&pxa168_device_fb, mi, sizeof(*mi));
-}
-
-static inline int pxa168_add_keypad(struct pxa27x_keypad_platform_data *data)
-{
-	if (cpu_is_pxa168())
-		data->clear_wakeup_event = pxa168_clear_keypad_wakeup;
-
-	return mmp_register_device(&pxa168_device_keypad, data, sizeof(*data));
-}
-
-static inline int pxa168_add_eth(struct pxa168_eth_platform_data *data)
-{
-	return mmp_register_device(&pxa168_device_eth, data, sizeof(*data));
-}
-#endif /* __ASM_MACH_PXA168_H */
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
deleted file mode 100644
index b19a069d9fab..000000000000
--- a/arch/arm/mach-mmp/pxa910.c
+++ /dev/null
@@ -1,190 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/pxa910.c
- *
- *  Code specific to PXA910
- */
-#include <linux/clk/mmp.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/irqchip/mmp.h>
-#include <linux/platform_device.h>
-
-#include <asm/hardware/cache-tauros2.h>
-#include <asm/mach/time.h>
-#include "addr-map.h"
-#include "regs-apbc.h"
-#include <linux/soc/mmp/cputype.h>
-#include "irqs.h"
-#include "mfp.h"
-#include "devices.h"
-#include "pm-pxa910.h"
-#include "pxa910.h"
-
-#include "common.h"
-
-#define MFPR_VIRT_BASE	(APB_VIRT_BASE + 0x1e000)
-
-static struct mfp_addr_map pxa910_mfp_addr_map[] __initdata =
-{
-	MFP_ADDR_X(GPIO0, GPIO54, 0xdc),
-	MFP_ADDR_X(GPIO67, GPIO98, 0x1b8),
-	MFP_ADDR_X(GPIO100, GPIO109, 0x238),
-
-	MFP_ADDR(GPIO123, 0xcc),
-	MFP_ADDR(GPIO124, 0xd0),
-
-	MFP_ADDR(DF_IO0, 0x40),
-	MFP_ADDR(DF_IO1, 0x3c),
-	MFP_ADDR(DF_IO2, 0x38),
-	MFP_ADDR(DF_IO3, 0x34),
-	MFP_ADDR(DF_IO4, 0x30),
-	MFP_ADDR(DF_IO5, 0x2c),
-	MFP_ADDR(DF_IO6, 0x28),
-	MFP_ADDR(DF_IO7, 0x24),
-	MFP_ADDR(DF_IO8, 0x20),
-	MFP_ADDR(DF_IO9, 0x1c),
-	MFP_ADDR(DF_IO10, 0x18),
-	MFP_ADDR(DF_IO11, 0x14),
-	MFP_ADDR(DF_IO12, 0x10),
-	MFP_ADDR(DF_IO13, 0xc),
-	MFP_ADDR(DF_IO14, 0x8),
-	MFP_ADDR(DF_IO15, 0x4),
-
-	MFP_ADDR(DF_nCS0_SM_nCS2, 0x44),
-	MFP_ADDR(DF_nCS1_SM_nCS3, 0x48),
-	MFP_ADDR(SM_nCS0, 0x4c),
-	MFP_ADDR(SM_nCS1, 0x50),
-	MFP_ADDR(DF_WEn, 0x54),
-	MFP_ADDR(DF_REn, 0x58),
-	MFP_ADDR(DF_CLE_SM_OEn, 0x5c),
-	MFP_ADDR(DF_ALE_SM_WEn, 0x60),
-	MFP_ADDR(SM_SCLK, 0x64),
-	MFP_ADDR(DF_RDY0, 0x68),
-	MFP_ADDR(SM_BE0, 0x6c),
-	MFP_ADDR(SM_BE1, 0x70),
-	MFP_ADDR(SM_ADV, 0x74),
-	MFP_ADDR(DF_RDY1, 0x78),
-	MFP_ADDR(SM_ADVMUX, 0x7c),
-	MFP_ADDR(SM_RDY, 0x80),
-
-	MFP_ADDR_X(MMC1_DAT7, MMC1_WP, 0x84),
-
-	MFP_ADDR_END,
-};
-
-void __init pxa910_init_irq(void)
-{
-	icu_init_irq();
-#ifdef CONFIG_PM
-	icu_irq_chip.irq_set_wake = pxa910_set_wake;
-#endif
-}
-
-static int __init pxa910_init(void)
-{
-	if (cpu_is_pxa910()) {
-#ifdef CONFIG_CACHE_TAUROS2
-		tauros2_init(0);
-#endif
-		mfp_init_base(MFPR_VIRT_BASE);
-		mfp_init_addr(pxa910_mfp_addr_map);
-		pxa910_clk_init(APB_PHYS_BASE + 0x50000,
-				AXI_PHYS_BASE + 0x82800,
-				APB_PHYS_BASE + 0x15000,
-				APB_PHYS_BASE + 0x3b000);
-	}
-
-	return 0;
-}
-postcore_initcall(pxa910_init);
-
-/* system timer - clock enabled, 3.25MHz */
-#define TIMER_CLK_RST	(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
-#define APBC_TIMERS	APBC_REG(0x34)
-
-void __init pxa910_timer_init(void)
-{
-	/* reset and configure */
-	__raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
-	__raw_writel(TIMER_CLK_RST, APBC_TIMERS);
-
-	mmp_timer_init(IRQ_PXA910_AP1_TIMER1, 3250000);
-}
-
-/* on-chip devices */
-
-/* NOTE: there are totally 3 UARTs on PXA910:
- *
- *   UART1   - Slow UART (can be used both by AP and CP)
- *   UART2/3 - Fast UART
- *
- * To be backward compatible with the legacy FFUART/BTUART/STUART sequence,
- * they are re-ordered as:
- *
- *   pxa910_device_uart1 - UART2 as FFUART
- *   pxa910_device_uart2 - UART3 as BTUART
- *
- * UART1 is not used by AP for the moment.
- */
-PXA910_DEVICE(uart1, "pxa2xx-uart", 0, UART2, 0xd4017000, 0x30, 21, 22);
-PXA910_DEVICE(uart2, "pxa2xx-uart", 1, UART3, 0xd4018000, 0x30, 23, 24);
-PXA910_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
-PXA910_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
-PXA910_DEVICE(pwm1, "pxa910-pwm", 0, NONE, 0xd401a000, 0x10);
-PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10);
-PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10);
-PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10);
-PXA910_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
-PXA910_DEVICE(disp, "mmp-disp", 0, LCD, 0xd420b000, 0x1ec);
-PXA910_DEVICE(fb, "mmp-fb", -1, NONE, 0, 0);
-PXA910_DEVICE(panel, "tpo-hvga", -1, NONE, 0, 0);
-
-struct resource pxa910_resource_gpio[] = {
-	{
-		.start	= 0xd4019000,
-		.end	= 0xd4019fff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_PXA910_AP_GPIO,
-		.end	= IRQ_PXA910_AP_GPIO,
-		.name	= "gpio_mux",
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa910_device_gpio = {
-	.name		= "mmp-gpio",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pxa910_resource_gpio),
-	.resource	= pxa910_resource_gpio,
-};
-
-static struct resource pxa910_resource_rtc[] = {
-	{
-		.start	= 0xd4010000,
-		.end	= 0xd401003f,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_PXA910_RTC_INT,
-		.end	= IRQ_PXA910_RTC_INT,
-		.name	= "rtc 1Hz",
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= IRQ_PXA910_RTC_ALARM,
-		.end	= IRQ_PXA910_RTC_ALARM,
-		.name	= "rtc alarm",
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa910_device_rtc = {
-	.name		= "sa1100-rtc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pxa910_resource_rtc),
-	.resource	= pxa910_resource_rtc,
-};
diff --git a/arch/arm/mach-mmp/pxa910.h b/arch/arm/mach-mmp/pxa910.h
deleted file mode 100644
index 7d229214065a..000000000000
--- a/arch/arm/mach-mmp/pxa910.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_MACH_PXA910_H
-#define __ASM_MACH_PXA910_H
-
-extern void pxa910_timer_init(void);
-extern void __init pxa910_init_irq(void);
-
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/platform_data/mtd-nand-pxa3xx.h>
-#include <video/mmp_disp.h>
-#include <linux/irqchip/mmp.h>
-
-#include "devices.h"
-
-extern struct mmp_device_desc pxa910_device_uart1;
-extern struct mmp_device_desc pxa910_device_uart2;
-extern struct mmp_device_desc pxa910_device_twsi0;
-extern struct mmp_device_desc pxa910_device_twsi1;
-extern struct mmp_device_desc pxa910_device_pwm1;
-extern struct mmp_device_desc pxa910_device_pwm2;
-extern struct mmp_device_desc pxa910_device_pwm3;
-extern struct mmp_device_desc pxa910_device_pwm4;
-extern struct mmp_device_desc pxa910_device_nand;
-extern struct platform_device pxa168_device_usb_phy;
-extern struct platform_device pxa168_device_u2o;
-extern struct platform_device pxa168_device_u2ootg;
-extern struct platform_device pxa168_device_u2oehci;
-extern struct mmp_device_desc pxa910_device_disp;
-extern struct mmp_device_desc pxa910_device_fb;
-extern struct mmp_device_desc pxa910_device_panel;
-extern struct platform_device pxa910_device_gpio;
-extern struct platform_device pxa910_device_rtc;
-
-static inline int pxa910_add_uart(int id)
-{
-	struct mmp_device_desc *d = NULL;
-
-	switch (id) {
-	case 1: d = &pxa910_device_uart1; break;
-	case 2: d = &pxa910_device_uart2; break;
-	}
-
-	if (d == NULL)
-		return -EINVAL;
-
-	return mmp_register_device(d, NULL, 0);
-}
-
-static inline int pxa910_add_twsi(int id, struct i2c_pxa_platform_data *data,
-				  struct i2c_board_info *info, unsigned size)
-{
-	struct mmp_device_desc *d = NULL;
-	int ret;
-
-	switch (id) {
-	case 0: d = &pxa910_device_twsi0; break;
-	case 1: d = &pxa910_device_twsi1; break;
-	default:
-		return -EINVAL;
-	}
-
-	ret = i2c_register_board_info(id, info, size);
-	if (ret)
-		return ret;
-
-	return mmp_register_device(d, data, sizeof(*data));
-}
-
-static inline int pxa910_add_pwm(int id)
-{
-	struct mmp_device_desc *d = NULL;
-
-	switch (id) {
-	case 1: d = &pxa910_device_pwm1; break;
-	case 2: d = &pxa910_device_pwm2; break;
-	case 3: d = &pxa910_device_pwm3; break;
-	case 4: d = &pxa910_device_pwm4; break;
-	default:
-		return -EINVAL;
-	}
-
-	return mmp_register_device(d, NULL, 0);
-}
-
-static inline int pxa910_add_nand(struct pxa3xx_nand_platform_data *info)
-{
-	return mmp_register_device(&pxa910_device_nand, info, sizeof(*info));
-}
-#endif /* __ASM_MACH_PXA910_H */
diff --git a/arch/arm/mach-mmp/regs-apbc.h b/arch/arm/mach-mmp/regs-apbc.h
deleted file mode 100644
index d0d00c2cce38..000000000000
--- a/arch/arm/mach-mmp/regs-apbc.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *   Application Peripheral Bus Clock Unit
- */
-
-#ifndef __ASM_MACH_REGS_APBC_H
-#define __ASM_MACH_REGS_APBC_H
-
-#include "addr-map.h"
-
-/* Common APB clock register bit definitions */
-#define APBC_APBCLK	(1 << 0)  /* APB Bus Clock Enable */
-#define APBC_FNCLK	(1 << 1)  /* Functional Clock Enable */
-#define APBC_RST	(1 << 2)  /* Reset Generation */
-
-/* Functional Clock Selection Mask */
-#define APBC_FNCLKSEL(x)	(((x) & 0xf) << 4)
-
-#endif /* __ASM_MACH_REGS_APBC_H */
diff --git a/arch/arm/mach-mmp/regs-apmu.h b/arch/arm/mach-mmp/regs-apmu.h
deleted file mode 100644
index e36f6503adfb..000000000000
--- a/arch/arm/mach-mmp/regs-apmu.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *   Application Subsystem Power Management Unit
- */
-
-#ifndef __ASM_MACH_REGS_APMU_H
-#define __ASM_MACH_REGS_APMU_H
-
-#include "addr-map.h"
-
-#define APMU_FNCLK_EN	(1 << 4)
-#define APMU_AXICLK_EN	(1 << 3)
-#define APMU_FNRST_DIS	(1 << 1)
-#define APMU_AXIRST_DIS	(1 << 0)
-
-/* Wake Clear Register */
-#define APMU_WAKE_CLR	APMU_REG(0x07c)
-
-#define APMU_PXA168_KP_WAKE_CLR		(1 << 7)
-#define APMU_PXA168_CFI_WAKE_CLR	(1 << 6)
-#define APMU_PXA168_XD_WAKE_CLR		(1 << 5)
-#define APMU_PXA168_MSP_WAKE_CLR	(1 << 4)
-#define APMU_PXA168_SD4_WAKE_CLR	(1 << 3)
-#define APMU_PXA168_SD3_WAKE_CLR	(1 << 2)
-#define APMU_PXA168_SD2_WAKE_CLR	(1 << 1)
-#define APMU_PXA168_SD1_WAKE_CLR	(1 << 0)
-
-#endif /* __ASM_MACH_REGS_APMU_H */
diff --git a/arch/arm/mach-mmp/regs-icu.h b/arch/arm/mach-mmp/regs-icu.h
deleted file mode 100644
index 410743d2b402..000000000000
--- a/arch/arm/mach-mmp/regs-icu.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *   Interrupt Control Unit
- */
-
-#ifndef __ASM_MACH_ICU_H
-#define __ASM_MACH_ICU_H
-
-#include "addr-map.h"
-
-#define ICU_VIRT_BASE	(AXI_VIRT_BASE + 0x82000)
-#define ICU_REG(x)	(ICU_VIRT_BASE + (x))
-
-#define ICU2_VIRT_BASE	(AXI_VIRT_BASE + 0x84000)
-#define ICU2_REG(x)	(ICU2_VIRT_BASE + (x))
-
-#define ICU_INT_CONF(n)		ICU_REG((n) << 2)
-#define ICU_INT_CONF_MASK	(0xf)
-
-/************ PXA168/PXA910 (MMP) *********************/
-#define ICU_INT_CONF_AP_INT	(1 << 6)
-#define ICU_INT_CONF_CP_INT	(1 << 5)
-#define ICU_INT_CONF_IRQ	(1 << 4)
-
-#define ICU_AP_FIQ_SEL_INT_NUM	ICU_REG(0x108)	/* AP FIQ Selected Interrupt */
-#define ICU_AP_IRQ_SEL_INT_NUM	ICU_REG(0x10C)	/* AP IRQ Selected Interrupt */
-#define ICU_AP_GBL_IRQ_MSK	ICU_REG(0x114)	/* AP Global Interrupt Mask */
-#define ICU_INT_STATUS_0	ICU_REG(0x128)	/* Interrupt Stuats 0 */
-#define ICU_INT_STATUS_1	ICU_REG(0x12C)	/* Interrupt Status 1 */
-
-/************************** MMP2 ***********************/
-
-/*
- * IRQ0/FIQ0 is routed to SP IRQ/FIQ.
- * IRQ1 is routed to PJ4 IRQ, and IRQ2 is routes to PJ4 FIQ.
- */
-#define ICU_INT_ROUTE_SP_IRQ		(1 << 4)
-#define ICU_INT_ROUTE_PJ4_IRQ		(1 << 5)
-#define ICU_INT_ROUTE_PJ4_FIQ		(1 << 6)
-
-#define MMP2_ICU_PJ4_IRQ_STATUS0	ICU_REG(0x138)
-#define MMP2_ICU_PJ4_IRQ_STATUS1	ICU_REG(0x13c)
-#define MMP2_ICU_PJ4_FIQ_STATUS0	ICU_REG(0x140)
-#define MMP2_ICU_PJ4_FIQ_STATUS1	ICU_REG(0x144)
-
-#define MMP2_ICU_INT4_STATUS		ICU_REG(0x150)
-#define MMP2_ICU_INT5_STATUS		ICU_REG(0x154)
-#define MMP2_ICU_INT17_STATUS		ICU_REG(0x158)
-#define MMP2_ICU_INT35_STATUS		ICU_REG(0x15c)
-#define MMP2_ICU_INT51_STATUS		ICU_REG(0x160)
-
-#define MMP2_ICU_INT4_MASK		ICU_REG(0x168)
-#define MMP2_ICU_INT5_MASK		ICU_REG(0x16C)
-#define MMP2_ICU_INT17_MASK		ICU_REG(0x170)
-#define MMP2_ICU_INT35_MASK		ICU_REG(0x174)
-#define MMP2_ICU_INT51_MASK		ICU_REG(0x178)
-
-#define MMP2_ICU_SP_IRQ_SEL		ICU_REG(0x100)
-#define MMP2_ICU_PJ4_IRQ_SEL		ICU_REG(0x104)
-#define MMP2_ICU_PJ4_FIQ_SEL		ICU_REG(0x108)
-
-#define MMP2_ICU_INVERT			ICU_REG(0x164)
-
-#define MMP2_ICU_INV_PMIC		(1 << 0)
-#define MMP2_ICU_INV_PERF		(1 << 1)
-#define MMP2_ICU_INV_COMMTX		(1 << 2)
-#define MMP2_ICU_INV_COMMRX		(1 << 3)
-
-#endif /* __ASM_MACH_ICU_H */
diff --git a/arch/arm/mach-mmp/regs-timers.h b/arch/arm/mach-mmp/regs-timers.h
index a69f4d7e3443..0cc4aca40e2c 100644
--- a/arch/arm/mach-mmp/regs-timers.h
+++ b/arch/arm/mach-mmp/regs-timers.h
@@ -6,11 +6,6 @@
 #ifndef __ASM_MACH_REGS_TIMERS_H
 #define __ASM_MACH_REGS_TIMERS_H
 
-#include "addr-map.h"
-
-#define TIMERS1_VIRT_BASE	(APB_VIRT_BASE + 0x14000)
-#define TIMERS2_VIRT_BASE	(APB_VIRT_BASE + 0x16000)
-
 #define TMR_CCR		(0x0000)
 #define TMR_TN_MM(n, m)	(0x0004 + ((n) << 3) + (((n) + (m)) << 2))
 #define TMR_CR(n)	(0x0028 + ((n) << 2))
diff --git a/arch/arm/mach-mmp/regs-usb.h b/arch/arm/mach-mmp/regs-usb.h
deleted file mode 100644
index ed0d1aa0ad6c..000000000000
--- a/arch/arm/mach-mmp/regs-usb.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
- */
-
-#ifndef __ASM_ARCH_REGS_USB_H
-#define __ASM_ARCH_REGS_USB_H
-
-#define PXA168_U2O_REGBASE	(0xd4208000)
-#define PXA168_U2O_PHYBASE	(0xd4207000)
-
-#define PXA168_U2H_REGBASE      (0xd4209000)
-#define PXA168_U2H_PHYBASE      (0xd4206000)
-
-#define MMP3_HSIC1_REGBASE	(0xf0001000)
-#define MMP3_HSIC1_PHYBASE	(0xf0001800)
-
-#define MMP3_HSIC2_REGBASE	(0xf0002000)
-#define MMP3_HSIC2_PHYBASE	(0xf0002800)
-
-#define MMP3_FSIC_REGBASE	(0xf0003000)
-#define MMP3_FSIC_PHYBASE	(0xf0003800)
-
-
-#define USB_REG_RANGE		(0x1ff)
-#define USB_PHY_RANGE		(0xff)
-
-/* registers */
-#define U2x_CAPREGS_OFFSET       0x100
-
-/* phy regs */
-#define UTMI_REVISION		0x0
-#define UTMI_CTRL		0x4
-#define UTMI_PLL		0x8
-#define UTMI_TX			0xc
-#define UTMI_RX			0x10
-#define UTMI_IVREF		0x14
-#define UTMI_T0			0x18
-#define UTMI_T1			0x1c
-#define UTMI_T2			0x20
-#define UTMI_T3			0x24
-#define UTMI_T4			0x28
-#define UTMI_T5			0x2c
-#define UTMI_RESERVE		0x30
-#define UTMI_USB_INT		0x34
-#define UTMI_DBG_CTL		0x38
-#define UTMI_OTG_ADDON		0x3c
-
-/* For UTMICTRL Register */
-#define UTMI_CTRL_USB_CLK_EN                    (1 << 31)
-/* pxa168 */
-#define UTMI_CTRL_SUSPEND_SET1                  (1 << 30)
-#define UTMI_CTRL_SUSPEND_SET2                  (1 << 29)
-#define UTMI_CTRL_RXBUF_PDWN                    (1 << 24)
-#define UTMI_CTRL_TXBUF_PDWN                    (1 << 11)
-
-#define UTMI_CTRL_INPKT_DELAY_SHIFT             30
-#define UTMI_CTRL_INPKT_DELAY_SOF_SHIFT		28
-#define UTMI_CTRL_PU_REF_SHIFT			20
-#define UTMI_CTRL_ARC_PULLDN_SHIFT              12
-#define UTMI_CTRL_PLL_PWR_UP_SHIFT              1
-#define UTMI_CTRL_PWR_UP_SHIFT                  0
-
-/* For UTMI_PLL Register */
-#define UTMI_PLL_PLLCALI12_SHIFT		29
-#define UTMI_PLL_PLLCALI12_MASK			(0x3 << 29)
-
-#define UTMI_PLL_PLLVDD18_SHIFT			27
-#define UTMI_PLL_PLLVDD18_MASK			(0x3 << 27)
-
-#define UTMI_PLL_PLLVDD12_SHIFT			25
-#define UTMI_PLL_PLLVDD12_MASK			(0x3 << 25)
-
-#define UTMI_PLL_CLK_BLK_EN_SHIFT               24
-#define CLK_BLK_EN                              (0x1 << 24)
-#define PLL_READY                               (0x1 << 23)
-#define KVCO_EXT                                (0x1 << 22)
-#define VCOCAL_START                            (0x1 << 21)
-
-#define UTMI_PLL_KVCO_SHIFT			15
-#define UTMI_PLL_KVCO_MASK                      (0x7 << 15)
-
-#define UTMI_PLL_ICP_SHIFT			12
-#define UTMI_PLL_ICP_MASK                       (0x7 << 12)
-
-#define UTMI_PLL_FBDIV_SHIFT                    4
-#define UTMI_PLL_FBDIV_MASK                     (0xFF << 4)
-
-#define UTMI_PLL_REFDIV_SHIFT                   0
-#define UTMI_PLL_REFDIV_MASK                    (0xF << 0)
-
-/* For UTMI_TX Register */
-#define UTMI_TX_REG_EXT_FS_RCAL_SHIFT		27
-#define UTMI_TX_REG_EXT_FS_RCAL_MASK		(0xf << 27)
-
-#define UTMI_TX_REG_EXT_FS_RCAL_EN_SHIFT	26
-#define UTMI_TX_REG_EXT_FS_RCAL_EN_MASK		(0x1 << 26)
-
-#define UTMI_TX_TXVDD12_SHIFT                   22
-#define UTMI_TX_TXVDD12_MASK                    (0x3 << 22)
-
-#define UTMI_TX_CK60_PHSEL_SHIFT                17
-#define UTMI_TX_CK60_PHSEL_MASK                 (0xf << 17)
-
-#define UTMI_TX_IMPCAL_VTH_SHIFT                14
-#define UTMI_TX_IMPCAL_VTH_MASK                 (0x7 << 14)
-
-#define REG_RCAL_START                          (0x1 << 12)
-
-#define UTMI_TX_LOW_VDD_EN_SHIFT                11
-
-#define UTMI_TX_AMP_SHIFT			0
-#define UTMI_TX_AMP_MASK			(0x7 << 0)
-
-/* For UTMI_RX Register */
-#define UTMI_REG_SQ_LENGTH_SHIFT                15
-#define UTMI_REG_SQ_LENGTH_MASK                 (0x3 << 15)
-
-#define UTMI_RX_SQ_THRESH_SHIFT                 4
-#define UTMI_RX_SQ_THRESH_MASK                  (0xf << 4)
-
-#define UTMI_OTG_ADDON_OTG_ON			(1 << 0)
-
-/* fsic registers */
-#define FSIC_MISC			0x4
-#define FSIC_INT			0x28
-#define FSIC_CTRL			0x30
-
-/* HSIC registers */
-#define HSIC_PAD_CTRL			0x4
-
-#define HSIC_CTRL			0x8
-#define HSIC_CTRL_HSIC_ENABLE		(1<<7)
-#define HSIC_CTRL_PLL_BYPASS		(1<<4)
-
-#define TEST_GRP_0			0xc
-#define TEST_GRP_1			0x10
-
-#define HSIC_INT			0x14
-#define HSIC_INT_READY_INT_EN		(1<<10)
-#define HSIC_INT_CONNECT_INT_EN		(1<<9)
-#define HSIC_INT_CORE_INT_EN		(1<<8)
-#define HSIC_INT_HS_READY		(1<<2)
-#define HSIC_INT_CONNECT		(1<<1)
-#define HSIC_INT_CORE			(1<<0)
-
-#define HSIC_CONFIG			0x18
-#define USBHSIC_CTRL			0x20
-
-#define HSIC_USB_CTRL			0x28
-#define HSIC_USB_CTRL_CLKEN		1
-#define	HSIC_USB_CLK_PHY		0x0
-#define HSIC_USB_CLK_PMU		0x1
-
-#endif /* __ASM_ARCH_PXA_U2O_H */
diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c
deleted file mode 100644
index ecc46c31004f..000000000000
--- a/arch/arm/mach-mmp/sram.c
+++ /dev/null
@@ -1,167 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/sram.c
- *
- *  based on mach-davinci/sram.c - DaVinci simple SRAM allocator
- *
- *  Copyright (c) 2011 Marvell Semiconductors Inc.
- *  All Rights Reserved
- *
- *  Add for mmp sram support - Leo Yan <leoy@marvell.com>
- */
-
-#include <linux/module.h>
-#include <linux/mod_devicetable.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/genalloc.h>
-
-#include <linux/platform_data/dma-mmp_tdma.h>
-
-struct sram_bank_info {
-	char *pool_name;
-	struct gen_pool *gpool;
-	int granularity;
-
-	phys_addr_t sram_phys;
-	void __iomem *sram_virt;
-	u32 sram_size;
-
-	struct list_head node;
-};
-
-static DEFINE_MUTEX(sram_lock);
-static LIST_HEAD(sram_bank_list);
-
-struct gen_pool *sram_get_gpool(char *pool_name)
-{
-	struct sram_bank_info *info = NULL;
-
-	if (!pool_name)
-		return NULL;
-
-	mutex_lock(&sram_lock);
-
-	list_for_each_entry(info, &sram_bank_list, node)
-		if (!strcmp(pool_name, info->pool_name))
-			break;
-
-	mutex_unlock(&sram_lock);
-
-	if (&info->node == &sram_bank_list)
-		return NULL;
-
-	return info->gpool;
-}
-EXPORT_SYMBOL(sram_get_gpool);
-
-static int sram_probe(struct platform_device *pdev)
-{
-	struct sram_platdata *pdata = pdev->dev.platform_data;
-	struct sram_bank_info *info;
-	struct resource *res;
-	int ret = 0;
-
-	if (!pdata || !pdata->pool_name)
-		return -ENODEV;
-
-	info = kzalloc(sizeof(*info), GFP_KERNEL);
-	if (!info)
-		return -ENOMEM;
-
-	platform_set_drvdata(pdev, info);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "no memory resource defined\n");
-		ret = -ENODEV;
-		goto out;
-	}
-
-	if (!resource_size(res))
-		return 0;
-
-	info->sram_phys   = (phys_addr_t)res->start;
-	info->sram_size   = resource_size(res);
-	info->sram_virt   = ioremap(info->sram_phys, info->sram_size);
-	info->pool_name	  = kstrdup(pdata->pool_name, GFP_KERNEL);
-	info->granularity = pdata->granularity;
-
-	info->gpool = gen_pool_create(ilog2(info->granularity), -1);
-	if (!info->gpool) {
-		dev_err(&pdev->dev, "create pool failed\n");
-		ret = -ENOMEM;
-		goto create_pool_err;
-	}
-
-	ret = gen_pool_add_virt(info->gpool, (unsigned long)info->sram_virt,
-				info->sram_phys, info->sram_size, -1);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "add new chunk failed\n");
-		ret = -ENOMEM;
-		goto add_chunk_err;
-	}
-
-	mutex_lock(&sram_lock);
-	list_add(&info->node, &sram_bank_list);
-	mutex_unlock(&sram_lock);
-
-	dev_info(&pdev->dev, "initialized\n");
-	return 0;
-
-add_chunk_err:
-	gen_pool_destroy(info->gpool);
-create_pool_err:
-	iounmap(info->sram_virt);
-	kfree(info->pool_name);
-out:
-	kfree(info);
-	return ret;
-}
-
-static int sram_remove(struct platform_device *pdev)
-{
-	struct sram_bank_info *info;
-
-	info = platform_get_drvdata(pdev);
-
-	if (info->sram_size) {
-		mutex_lock(&sram_lock);
-		list_del(&info->node);
-		mutex_unlock(&sram_lock);
-
-		gen_pool_destroy(info->gpool);
-		iounmap(info->sram_virt);
-		kfree(info->pool_name);
-	}
-
-	kfree(info);
-
-	return 0;
-}
-
-static const struct platform_device_id sram_id_table[] = {
-	{ "asram", MMP_ASRAM },
-	{ "isram", MMP_ISRAM },
-	{ }
-};
-
-static struct platform_driver sram_driver = {
-	.probe		= sram_probe,
-	.remove		= sram_remove,
-	.driver		= {
-		.name	= "mmp-sram",
-	},
-	.id_table	= sram_id_table,
-};
-
-static int __init sram_init(void)
-{
-	return platform_driver_register(&sram_driver);
-}
-core_initcall(sram_init);
-
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c
deleted file mode 100644
index 7111535f325f..000000000000
--- a/arch/arm/mach-mmp/teton_bga.c
+++ /dev/null
@@ -1,100 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/teton_bga.c
- *
- *  Support for the Marvell PXA168 Teton BGA Development Platform.
- *
- *  Author: Mark F. Brown <mark.brown314@gmail.com>
- *
- *  This code is based on aspenite.c
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/input.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include <linux/i2c.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "addr-map.h"
-#include "mfp-pxa168.h"
-#include "pxa168.h"
-#include "teton_bga.h"
-#include "irqs.h"
-
-#include "common.h"
-
-static unsigned long teton_bga_pin_config[] __initdata = {
-	/* UART1 */
-	GPIO107_UART1_TXD,
-	GPIO108_UART1_RXD,
-
-	/* Keypad */
-	GPIO109_KP_MKIN1,
-	GPIO110_KP_MKIN0,
-	GPIO111_KP_MKOUT7,
-	GPIO112_KP_MKOUT6,
-
-	/* I2C Bus */
-	GPIO105_CI2C_SDA,
-	GPIO106_CI2C_SCL,
-
-	/* RTC */
-	GPIO78_GPIO,
-};
-
-static struct pxa_gpio_platform_data pxa168_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static unsigned int teton_bga_matrix_key_map[] = {
-	KEY(0, 6, KEY_ESC),
-	KEY(0, 7, KEY_ENTER),
-	KEY(1, 6, KEY_LEFT),
-	KEY(1, 7, KEY_RIGHT),
-};
-
-static struct matrix_keymap_data teton_bga_matrix_keymap_data = {
-	.keymap			= teton_bga_matrix_key_map,
-	.keymap_size		= ARRAY_SIZE(teton_bga_matrix_key_map),
-};
-
-static struct pxa27x_keypad_platform_data teton_bga_keypad_info __initdata = {
-	.matrix_key_rows        = 2,
-	.matrix_key_cols        = 8,
-	.matrix_keymap_data	= &teton_bga_matrix_keymap_data,
-	.debounce_interval      = 30,
-};
-
-static struct i2c_board_info teton_bga_i2c_info[] __initdata = {
-	{
-		I2C_BOARD_INFO("ds1337", 0x68),
-		.irq = MMP_GPIO_TO_IRQ(RTC_INT_GPIO)
-	},
-};
-
-static void __init teton_bga_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(teton_bga_pin_config));
-
-	/* on-chip devices */
-	pxa168_add_uart(1);
-	pxa168_add_keypad(&teton_bga_keypad_info);
-	pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(teton_bga_i2c_info));
-	platform_device_add_data(&pxa168_device_gpio, &pxa168_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_device_register(&pxa168_device_gpio);
-}
-
-MACHINE_START(TETON_BGA, "PXA168-based Teton BGA Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= MMP_NR_IRQS,
-	.init_irq       = pxa168_init_irq,
-	.init_time	= pxa168_timer_init,
-	.init_machine   = teton_bga_init,
-	.restart	= pxa168_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mmp/teton_bga.h b/arch/arm/mach-mmp/teton_bga.h
deleted file mode 100644
index 73050096f0bd..000000000000
--- a/arch/arm/mach-mmp/teton_bga.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  Support for the Marvell PXA168 Teton BGA Development Platform.
- */
-#ifndef __ASM_MACH_TETON_BGA_H
-#define __ASM_MACH_TETON_BGA_H
-
-/* GPIOs */
-#define MMC_PWENA_GPIO		27
-#define USBHPENB_GPIO		55
-#define RTC_INT_GPIO		78
-#define LCD_VBLK_EN_GPIO	79
-#define LCD_DVDD_EN_GPIO	80
-#define RST_WIFI_GPIO		81
-#define CF_PWEN_GPIO		82
-#define USB_OC_GPIO		83
-#define PWM_GPIO		84
-#define USBHPENA_GPIO		85
-#define TS_INT_GPIO		86
-#define CIR_GPIO		108
-
-#endif /* __ASM_MACH_TETON_BGA_H */
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index 708816caf859..fcb190826dd1 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -29,18 +29,13 @@
 #include <linux/sched_clock.h>
 #include <asm/mach/time.h>
 
-#include "addr-map.h"
 #include "regs-timers.h"
-#include "regs-apbc.h"
-#include "irqs.h"
 #include <linux/soc/mmp/cputype.h>
 
-#define TIMERS_VIRT_BASE	TIMERS1_VIRT_BASE
-
 #define MAX_DELTA		(0xfffffffe)
 #define MIN_DELTA		(16)
 
-static void __iomem *mmp_timer_base = TIMERS_VIRT_BASE;
+static void __iomem *mmp_timer_base;
 
 /*
  * Read the timer through the CVWR register. Delay is required after requesting
@@ -177,7 +172,7 @@ static void __init timer_config(void)
 	__raw_writel(0x2, mmp_timer_base + TMR_CER);
 }
 
-void __init mmp_timer_init(int irq, unsigned long rate)
+static void __init mmp_timer_init(int irq, unsigned long rate)
 {
 	timer_config();
 
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
deleted file mode 100644
index 345b2e6d5c7e..000000000000
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ /dev/null
@@ -1,315 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-mmp/ttc_dkb.c
- *
- *  Support for the Marvell PXA910-based TTC_DKB Development Platform.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/onenand.h>
-#include <linux/interrupt.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/mfd/88pm860x.h>
-#include <linux/platform_data/mv_usb.h>
-#include <linux/spi/spi.h>
-#include <linux/delay.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include "addr-map.h"
-#include "mfp-pxa910.h"
-#include "pxa910.h"
-#include "irqs.h"
-#include "regs-usb.h"
-
-#include "common.h"
-
-#define TTCDKB_GPIO_EXT0(x)	(MMP_NR_BUILTIN_GPIO + ((x < 0) ? 0 :	\
-				((x < 16) ? x : 15)))
-#define TTCDKB_GPIO_EXT1(x)	(MMP_NR_BUILTIN_GPIO + 16 + ((x < 0) ? 0 : \
-				((x < 16) ? x : 15)))
-
-/*
- * 16 board interrupts -- MAX7312 GPIO expander
- * 16 board interrupts -- PCA9575 GPIO expander
- * 24 board interrupts -- 88PM860x PMIC
- */
-#define TTCDKB_NR_IRQS		(MMP_NR_IRQS + 16 + 16 + 24)
-
-static unsigned long ttc_dkb_pin_config[] __initdata = {
-	/* UART2 */
-	GPIO47_UART2_RXD,
-	GPIO48_UART2_TXD,
-
-	/* DFI */
-	DF_IO0_ND_IO0,
-	DF_IO1_ND_IO1,
-	DF_IO2_ND_IO2,
-	DF_IO3_ND_IO3,
-	DF_IO4_ND_IO4,
-	DF_IO5_ND_IO5,
-	DF_IO6_ND_IO6,
-	DF_IO7_ND_IO7,
-	DF_IO8_ND_IO8,
-	DF_IO9_ND_IO9,
-	DF_IO10_ND_IO10,
-	DF_IO11_ND_IO11,
-	DF_IO12_ND_IO12,
-	DF_IO13_ND_IO13,
-	DF_IO14_ND_IO14,
-	DF_IO15_ND_IO15,
-	DF_nCS0_SM_nCS2_nCS0,
-	DF_ALE_SM_WEn_ND_ALE,
-	DF_CLE_SM_OEn_ND_CLE,
-	DF_WEn_DF_WEn,
-	DF_REn_DF_REn,
-	DF_RDY0_DF_RDY0,
-};
-
-static struct pxa_gpio_platform_data pxa910_gpio_pdata = {
-	.irq_base	= MMP_GPIO_TO_IRQ(0),
-};
-
-static struct mtd_partition ttc_dkb_onenand_partitions[] = {
-	{
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= SZ_1M,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "reserved",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "reserved",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_8M,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= (SZ_2M + SZ_1M),
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_32M + SZ_16M,
-		.mask_flags	= 0,
-	}
-};
-
-static struct onenand_platform_data ttc_dkb_onenand_info = {
-	.parts		= ttc_dkb_onenand_partitions,
-	.nr_parts	= ARRAY_SIZE(ttc_dkb_onenand_partitions),
-};
-
-static struct resource ttc_dkb_resource_onenand[] = {
-	[0] = {
-		.start	= SMC_CS0_PHYS_BASE,
-		.end	= SMC_CS0_PHYS_BASE + SZ_1M,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device ttc_dkb_device_onenand = {
-	.name		= "onenand-flash",
-	.id		= -1,
-	.resource	= ttc_dkb_resource_onenand,
-	.num_resources	= ARRAY_SIZE(ttc_dkb_resource_onenand),
-	.dev		= {
-		.platform_data	= &ttc_dkb_onenand_info,
-	},
-};
-
-static struct platform_device *ttc_dkb_devices[] = {
-	&pxa910_device_gpio,
-	&pxa910_device_rtc,
-	&ttc_dkb_device_onenand,
-};
-
-static struct pca953x_platform_data max7312_data[] = {
-	{
-		.gpio_base	= TTCDKB_GPIO_EXT0(0),
-		.irq_base	= MMP_NR_IRQS,
-	},
-};
-
-static struct pm860x_platform_data ttc_dkb_pm8607_info = {
-	.irq_base       = IRQ_BOARD_START,
-};
-
-static struct i2c_board_info ttc_dkb_i2c_info[] = {
-	{
-		.type           = "88PM860x",
-		.addr           = 0x34,
-		.platform_data  = &ttc_dkb_pm8607_info,
-		.irq            = IRQ_PXA910_PMIC_INT,
-	},
-	{
-		.type		= "max7312",
-		.addr		= 0x23,
-		.irq		= MMP_GPIO_TO_IRQ(80),
-		.platform_data	= &max7312_data,
-	},
-};
-
-#if IS_ENABLED(CONFIG_USB_SUPPORT)
-#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
-
-static struct mv_usb_platform_data ttc_usb_pdata = {
-	.vbus		= NULL,
-	.mode		= MV_USB_MODE_OTG,
-	.otg_force_a_bus_req = 1,
-	.phy_init	= pxa_usb_phy_init,
-	.phy_deinit	= pxa_usb_phy_deinit,
-	.set_vbus	= NULL,
-};
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
-static struct pxa3xx_nand_platform_data dkb_nand_info = {};
-#endif
-
-#if IS_ENABLED(CONFIG_MMP_DISP)
-/* path config */
-#define CFG_IOPADMODE(iopad)   (iopad)  /* 0x0 ~ 0xd */
-#define SCLK_SOURCE_SELECT(x)  (x << 30) /* 0x0 ~ 0x3 */
-/* link config */
-#define CFG_DUMBMODE(mode)     (mode << 28) /* 0x0 ~ 0x6*/
-static struct mmp_mach_path_config dkb_disp_config[] = {
-	[0] = {
-		.name = "mmp-parallel",
-		.overlay_num = 2,
-		.output_type = PATH_OUT_PARALLEL,
-		.path_config = CFG_IOPADMODE(0x1)
-			| SCLK_SOURCE_SELECT(0x1),
-		.link_config = CFG_DUMBMODE(0x2),
-	},
-};
-
-static struct mmp_mach_plat_info dkb_disp_info = {
-	.name = "mmp-disp",
-	.clk_name = "disp0",
-	.path_num = 1,
-	.paths = dkb_disp_config,
-};
-
-static struct mmp_buffer_driver_mach_info dkb_fb_info = {
-	.name = "mmp-fb",
-	.path_name = "mmp-parallel",
-	.overlay_id = 0,
-	.dmafetch_id = 1,
-	.default_pixfmt = PIXFMT_RGB565,
-};
-
-static void dkb_tpo_panel_power(int on)
-{
-	int err;
-	u32 spi_reset = mfp_to_gpio(MFP_PIN_GPIO106);
-
-	if (on) {
-		err = gpio_request(spi_reset, "TPO_LCD_SPI_RESET");
-		if (err) {
-			pr_err("failed to request GPIO for TPO LCD RESET\n");
-			return;
-		}
-		gpio_direction_output(spi_reset, 0);
-		udelay(100);
-		gpio_set_value(spi_reset, 1);
-		gpio_free(spi_reset);
-	} else {
-		err = gpio_request(spi_reset, "TPO_LCD_SPI_RESET");
-		if (err) {
-			pr_err("failed to request LCD RESET gpio\n");
-			return;
-		}
-		gpio_set_value(spi_reset, 0);
-		gpio_free(spi_reset);
-	}
-}
-
-static struct mmp_mach_panel_info dkb_tpo_panel_info = {
-	.name = "tpo-hvga",
-	.plat_path_name = "mmp-parallel",
-	.plat_set_onoff = dkb_tpo_panel_power,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-	{
-		.modalias       = "tpo-hvga",
-		.platform_data  = &dkb_tpo_panel_info,
-		.bus_num        = 5,
-	}
-};
-
-static void __init add_disp(void)
-{
-	mmp_register_device(&pxa910_device_disp,
-		&dkb_disp_info, sizeof(dkb_disp_info));
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-	mmp_register_device(&pxa910_device_fb,
-		&dkb_fb_info, sizeof(dkb_fb_info));
-	mmp_register_device(&pxa910_device_panel,
-		&dkb_tpo_panel_info, sizeof(dkb_tpo_panel_info));
-}
-#endif
-
-static void __init ttc_dkb_init(void)
-{
-	mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config));
-
-	/* on-chip devices */
-	pxa910_add_uart(1);
-#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
-	pxa910_add_nand(&dkb_nand_info);
-#endif
-
-	/* off-chip devices */
-	pxa910_add_twsi(0, NULL, ARRAY_AND_SIZE(ttc_dkb_i2c_info));
-	platform_device_add_data(&pxa910_device_gpio, &pxa910_gpio_pdata,
-				 sizeof(struct pxa_gpio_platform_data));
-	platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices));
-
-#if IS_ENABLED(CONFIG_USB_SUPPORT)
-#if IS_ENABLED(CONFIG_PHY_PXA_USB)
-	platform_device_register(&pxa168_device_usb_phy);
-#endif
-
-#if IS_ENABLED(CONFIG_USB_MV_UDC)
-	pxa168_device_u2o.dev.platform_data = &ttc_usb_pdata;
-	platform_device_register(&pxa168_device_u2o);
-#endif
-
-#if IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
-	pxa168_device_u2oehci.dev.platform_data = &ttc_usb_pdata;
-	platform_device_register(&pxa168_device_u2oehci);
-#endif
-
-#if IS_ENABLED(CONFIG_USB_MV_OTG)
-	pxa168_device_u2ootg.dev.platform_data = &ttc_usb_pdata;
-	platform_device_register(&pxa168_device_u2ootg);
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_MMP_DISP)
-	add_disp();
-#endif
-}
-
-MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")
-	.map_io		= mmp_map_io,
-	.nr_irqs	= TTCDKB_NR_IRQS,
-	.init_irq       = pxa910_init_irq,
-	.init_time	= pxa910_timer_init,
-	.init_machine   = ttc_dkb_init,
-	.restart	= mmp_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig
index da92f94494cc..9de3bbc09c3a 100644
--- a/arch/arm/mach-mv78xx0/Kconfig
+++ b/arch/arm/mach-mv78xx0/Kconfig
@@ -3,7 +3,7 @@ menuconfig ARCH_MV78XX0
 	bool "Marvell MV78xx0"
 	depends on ARCH_MULTI_V5
 	depends on CPU_LITTLE_ENDIAN
-	depends on ATAGS && UNUSED_BOARD_FILES
+	depends on ATAGS
 	select CPU_FEROCEON
 	select GPIOLIB
 	select MVEBU_MBUS
@@ -15,18 +15,6 @@ menuconfig ARCH_MV78XX0
 
 if ARCH_MV78XX0
 
-config MACH_DB78X00_BP
-	bool "Marvell DB-78x00-BP Development Board"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell DB-78x00-BP Development Board.
-
-config MACH_RD78X00_MASA
-	bool "Marvell RD-78x00-mASA Reference Design"
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell RD-78x00-mASA Reference Design.
-
 config MACH_TERASTATION_WXL
 	bool "Buffalo WLX (Terastation Duo) NAS"
 	help
diff --git a/arch/arm/mach-mv78xx0/Makefile b/arch/arm/mach-mv78xx0/Makefile
index 50aff70065f2..ddee6ae501bb 100644
--- a/arch/arm/mach-mv78xx0/Makefile
+++ b/arch/arm/mach-mv78xx0/Makefile
@@ -2,6 +2,4 @@
 ccflags-y := -I$(srctree)/arch/arm/plat-orion/include
 
 obj-y				+= common.o mpp.o irq.o pcie.o
-obj-$(CONFIG_MACH_DB78X00_BP)	+= db78x00-bp-setup.o
-obj-$(CONFIG_MACH_RD78X00_MASA)	+= rd78x00-masa-setup.o
 obj-$(CONFIG_MACH_TERASTATION_WXL) += buffalo-wxl-setup.o
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
deleted file mode 100644
index da633a33a0c1..000000000000
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ /dev/null
@@ -1,101 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-mv78xx0/db78x00-bp-setup.c
- *
- * Marvell DB-78x00-BP Development Board Setup
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <linux/i2c.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "mv78xx0.h"
-#include "common.h"
-
-static struct mv643xx_eth_platform_data db78x00_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv643xx_eth_platform_data db78x00_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(9),
-};
-
-static struct mv643xx_eth_platform_data db78x00_ge10_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(10),
-};
-
-static struct mv643xx_eth_platform_data db78x00_ge11_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
-};
-
-static struct mv_sata_platform_data db78x00_sata_data = {
-	.n_ports	= 2,
-};
-
-static struct i2c_board_info __initdata db78x00_i2c_rtc = {
-	I2C_BOARD_INFO("ds1338", 0x68),
-};
-
-
-static void __init db78x00_init(void)
-{
-	/*
-	 * Basic MV78xx0 setup. Needs to be called early.
-	 */
-	mv78xx0_init();
-
-	/*
-	 * Partition on-chip peripherals between the two CPU cores.
-	 */
-	if (mv78xx0_core_index() == 0) {
-		mv78xx0_ehci0_init();
-		mv78xx0_ehci1_init();
-		mv78xx0_ehci2_init();
-		mv78xx0_ge00_init(&db78x00_ge00_data);
-		mv78xx0_ge01_init(&db78x00_ge01_data);
-		mv78xx0_ge10_init(&db78x00_ge10_data);
-		mv78xx0_ge11_init(&db78x00_ge11_data);
-		mv78xx0_sata_init(&db78x00_sata_data);
-		mv78xx0_uart0_init();
-		mv78xx0_uart2_init();
-		mv78xx0_i2c_init();
-		i2c_register_board_info(0, &db78x00_i2c_rtc, 1);
-	} else {
-		mv78xx0_uart1_init();
-		mv78xx0_uart3_init();
-	}
-}
-
-static int __init db78x00_pci_init(void)
-{
-	if (machine_is_db78x00_bp()) {
-		/*
-		 * Assign the x16 PCIe slot on the board to CPU core
-		 * #0, and let CPU core #1 have the four x1 slots.
-		 */
-		if (mv78xx0_core_index() == 0)
-			mv78xx0_pcie_init(0, 1);
-		else
-			mv78xx0_pcie_init(1, 0);
-	}
-
-	return 0;
-}
-subsys_initcall(db78x00_pci_init);
-
-MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board")
-	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= MV78XX0_NR_IRQS,
-	.init_machine	= db78x00_init,
-	.map_io		= mv78xx0_map_io,
-	.init_early	= mv78xx0_init_early,
-	.init_irq	= mv78xx0_init_irq,
-	.init_time	= mv78xx0_timer_init,
-	.restart	= mv78xx0_restart,
-MACHINE_END
diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
deleted file mode 100644
index 80ca8b1a81de..000000000000
--- a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
+++ /dev/null
@@ -1,86 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-mv78x00/rd78x00-masa-setup.c
- *
- * Marvell RD-78x00-mASA Development Board Setup
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "mv78xx0.h"
-#include "common.h"
-
-static struct mv643xx_eth_platform_data rd78x00_masa_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv643xx_eth_platform_data rd78x00_masa_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(9),
-};
-
-static struct mv643xx_eth_platform_data rd78x00_masa_ge10_data = {
-};
-
-static struct mv643xx_eth_platform_data rd78x00_masa_ge11_data = {
-};
-
-static struct mv_sata_platform_data rd78x00_masa_sata_data = {
-	.n_ports	= 2,
-};
-
-static void __init rd78x00_masa_init(void)
-{
-	/*
-	 * Basic MV78x00 setup. Needs to be called early.
-	 */
-	mv78xx0_init();
-
-	/*
-	 * Partition on-chip peripherals between the two CPU cores.
-	 */
-	if (mv78xx0_core_index() == 0) {
-		mv78xx0_ehci0_init();
-		mv78xx0_ehci1_init();
-		mv78xx0_ge00_init(&rd78x00_masa_ge00_data);
-		mv78xx0_ge10_init(&rd78x00_masa_ge10_data);
-		mv78xx0_sata_init(&rd78x00_masa_sata_data);
-		mv78xx0_uart0_init();
-		mv78xx0_uart2_init();
-	} else {
-		mv78xx0_ehci2_init();
-		mv78xx0_ge01_init(&rd78x00_masa_ge01_data);
-		mv78xx0_ge11_init(&rd78x00_masa_ge11_data);
-		mv78xx0_uart1_init();
-		mv78xx0_uart3_init();
-	}
-}
-
-static int __init rd78x00_pci_init(void)
-{
-	/*
-	 * Assign all PCIe devices to CPU core #0.
-	 */
-	if (machine_is_rd78x00_masa() && mv78xx0_core_index() == 0)
-		mv78xx0_pcie_init(1, 1);
-
-	return 0;
-}
-subsys_initcall(rd78x00_pci_init);
-
-MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board")
-	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= MV78XX0_NR_IRQS,
-	.init_machine	= rd78x00_masa_init,
-	.map_io		= mv78xx0_map_io,
-	.init_early	= mv78xx0_init_early,
-	.init_irq	= mv78xx0_init_irq,
-	.init_time	= mv78xx0_timer_init,
-	.restart	= mv78xx0_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 7ec7ada287e0..8df9a4de0e79 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -19,19 +19,6 @@ menu "TI OMAP1 specific features"
 
 comment "OMAP Core Type"
 
-config ARCH_OMAP730
-	depends on ARCH_MULTI_V5
-	bool "OMAP730 Based System"
-	select ARCH_OMAP_OTG
-	select CPU_ARM926T
-	select OMAP_MPU_TIMER
-
-config ARCH_OMAP850
-	depends on ARCH_MULTI_V5
-	bool "OMAP850 Based System"
-	select ARCH_OMAP_OTG
-	select CPU_ARM926T
-
 config ARCH_OMAP15XX
 	depends on ARCH_MULTI_V4T
 	default y
@@ -126,37 +113,6 @@ config ARCH_OMAP_OTG
 
 comment "OMAP Board Type"
 
-config MACH_OMAP_INNOVATOR
-	bool "TI Innovator"
-	depends on ARCH_OMAP15XX || ARCH_OMAP16XX
-	depends on UNUSED_BOARD_FILES
-	help
-          TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
-          have such a board.
-
-config MACH_OMAP_H2
-	bool "TI H2 Support"
-	depends on ARCH_OMAP16XX
-	depends on UNUSED_BOARD_FILES
-	help
-	  TI OMAP 1610/1611B H2 board support. Say Y here if you have such
-	  a board.
-
-config MACH_OMAP_H3
-	bool "TI H3 Support"
-	depends on ARCH_OMAP16XX
-	depends on UNUSED_BOARD_FILES
-	help
-	  TI OMAP 1710 H3 board support. Say Y here if you have such
-	  a board.
-
-config MACH_HERALD
-	bool "HTC Herald"
-	depends on ARCH_OMAP850
-	depends on UNUSED_BOARD_FILES
-	help
-	  HTC Herald smartphone support (AKA T-Mobile Wing, ...)
-
 config MACH_OMAP_OSK
 	bool "TI OSK Support"
 	depends on ARCH_OMAP16XX
@@ -164,31 +120,6 @@ config MACH_OMAP_OSK
 	  TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
           if you have such a board.
 
-config OMAP_OSK_MISTRAL
-	bool "Mistral QVGA board Support"
-	depends on MACH_OMAP_OSK
-	depends on UNUSED_BOARD_FILES
-	help
-	  The OSK supports an optional add-on board with a Quarter-VGA
-	  touchscreen, PDA-ish buttons, a resume button, bicolor LED,
-	  and camera connector.  Say Y here if you have this board.
-
-config MACH_OMAP_PERSEUS2
-	bool "TI Perseus2"
-	depends on ARCH_OMAP730
-	depends on UNUSED_BOARD_FILES
-	help
-	  Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
-	  a board.
-
-config MACH_OMAP_FSAMPLE
-	bool "TI F-Sample"
-	depends on ARCH_OMAP730
-	depends on UNUSED_BOARD_FILES
-	help
-	  Support for TI OMAP 850 F-Sample board. Say Y here if you have such
-	  a board.
-
 config MACH_OMAP_PALMTE
 	bool "Palm Tungsten E"
 	depends on ARCH_OMAP15XX
@@ -198,26 +129,6 @@ config MACH_OMAP_PALMTE
 	  http://palmtelinux.sourceforge.net/ for more information.
 	  Say Y here if you have this PDA model, say N otherwise.
 
-config MACH_OMAP_PALMZ71
-	bool "Palm Zire71"
-	depends on ARCH_OMAP15XX
-	depends on UNUSED_BOARD_FILES
-	help
-	 Support for the Palm Zire71 PDA. To boot the kernel,
-	 you'll need a PalmOS compatible bootloader; check out
-	 http://hackndev.com/palm/z71 for more information.
-	 Say Y here if you have such a PDA, say N otherwise.
-
-config MACH_OMAP_PALMTT
-	bool "Palm Tungsten|T"
-	depends on ARCH_OMAP15XX
-	depends on UNUSED_BOARD_FILES
-	help
-	  Support for the Palm Tungsten|T PDA. To boot the kernel, you'll
-	  need a PalmOS compatible bootloader (Garux); check out
-	  http://garux.sourceforge.net/ for more information.
-	  Say Y here if you have this PDA model, say N otherwise.
-
 config MACH_SX1
 	bool "Siemens SX1"
 	depends on ARCH_OMAP15XX
@@ -249,16 +160,6 @@ config MACH_AMS_DELTA
 	  Support for the Amstrad E3 (codename Delta) videophone. Say Y here
 	  if you have such a device.
 
-config MACH_OMAP_GENERIC
-	bool "Generic OMAP board"
-	depends on ARCH_OMAP15XX || ARCH_OMAP16XX
-	depends on UNUSED_BOARD_FILES
-	help
-          Support for generic OMAP-1510, 1610 or 1710 board with
-          no FPGA. Can be used as template for porting Linux to
-          custom OMAP boards. Say Y here if you have a custom
-          board.
-
 endmenu
 
 endif
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 0615cb0ba580..d9e251ea4773 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -29,31 +29,13 @@ usb-fs-$(CONFIG_USB_SUPPORT)		:= usb.o
 obj-y					+= $(usb-fs-m) $(usb-fs-y)
 
 # Specific board support
-obj-$(CONFIG_MACH_OMAP_H2)		+= board-h2.o board-h2-mmc.o \
-					   board-nand.o
-obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= board-innovator.o
-obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
-obj-$(CONFIG_MACH_OMAP_PERSEUS2)	+= board-perseus2.o board-nand.o
-obj-$(CONFIG_MACH_OMAP_FSAMPLE)		+= board-fsample.o board-nand.o
 obj-$(CONFIG_MACH_OMAP_OSK)		+= board-osk.o
-obj-$(CONFIG_MACH_OMAP_H3)		+= board-h3.o board-h3-mmc.o \
-					   board-nand.o
 obj-$(CONFIG_MACH_OMAP_PALMTE)		+= board-palmte.o
-obj-$(CONFIG_MACH_OMAP_PALMZ71)		+= board-palmz71.o
-obj-$(CONFIG_MACH_OMAP_PALMTT)		+= board-palmtt.o
 obj-$(CONFIG_MACH_NOKIA770)		+= board-nokia770.o
 obj-$(CONFIG_MACH_AMS_DELTA)		+= board-ams-delta.o ams-delta-fiq.o \
 					   ams-delta-fiq-handler.o
 obj-$(CONFIG_MACH_SX1)			+= board-sx1.o board-sx1-mmc.o
-obj-$(CONFIG_MACH_HERALD)		+= board-htcherald.o
-
-ifeq ($(CONFIG_ARCH_OMAP15XX),y)
-# Innovator-1510 FPGA
-obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= fpga.o
-endif
 
 # GPIO
-obj-$(CONFIG_ARCH_OMAP730)		+= gpio7xx.o
-obj-$(CONFIG_ARCH_OMAP850)		+= gpio7xx.o
 obj-$(CONFIG_ARCH_OMAP15XX)		+= gpio15xx.o
 obj-$(CONFIG_ARCH_OMAP16XX)		+= gpio16xx.o
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 651c28d81132..0f67ac4c6fd2 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -871,7 +871,7 @@ static void __init ams_delta_init_late(void)
 
 static void __init ams_delta_map_io(void)
 {
-	omap15xx_map_io();
+	omap1_map_io();
 	iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
 }
 
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
deleted file mode 100644
index f21e15c7b973..000000000000
--- a/arch/arm/mach-omap1/board-fsample.c
+++ /dev/null
@@ -1,366 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-fsample.c
- *
- * Modified from board-perseus2.c
- *
- * Original OMAP730 support by Jean Pihet <j-pihet@ti.com>
- * Updated for 2.6 by Kevin Hilman <kjh@hilman.org>
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/platnand.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/smc91x.h>
-#include <linux/omapfb.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/soc/ti/omap1-io.h>
-#include <linux/platform_data/keypad-omap.h>
-#include "tc.h"
-
-#include "mux.h"
-#include "flash.h"
-#include "hardware.h"
-#include "iomap.h"
-#include "common.h"
-#include "fpga.h"
-
-/* fsample is pretty close to p2-sample */
-
-#define fsample_cpld_read(reg) __raw_readb(reg)
-#define fsample_cpld_write(val, reg) __raw_writeb(val, reg)
-
-#define FSAMPLE_CPLD_BASE    0xE8100000
-#define FSAMPLE_CPLD_SIZE    SZ_4K
-#define FSAMPLE_CPLD_START   0x05080000
-
-#define FSAMPLE_CPLD_REG_A   (FSAMPLE_CPLD_BASE + 0x00)
-#define FSAMPLE_CPLD_SWITCH  (FSAMPLE_CPLD_BASE + 0x02)
-#define FSAMPLE_CPLD_UART    (FSAMPLE_CPLD_BASE + 0x02)
-#define FSAMPLE_CPLD_REG_B   (FSAMPLE_CPLD_BASE + 0x04)
-#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06)
-#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06)
-
-#define FSAMPLE_CPLD_BIT_BT_RESET         0
-#define FSAMPLE_CPLD_BIT_LCD_RESET        1
-#define FSAMPLE_CPLD_BIT_CAM_PWDN         2
-#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE   3
-#define FSAMPLE_CPLD_BIT_SD_MMC_EN        4
-#define FSAMPLE_CPLD_BIT_aGPS_PWREN       5
-#define FSAMPLE_CPLD_BIT_BACKLIGHT        6
-#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET    7
-#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N    8
-#define FSAMPLE_CPLD_BIT_OTG_RESET        9
-
-#define fsample_cpld_set(bit) \
-    fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR)
-
-#define fsample_cpld_clear(bit) \
-    fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
-
-static const unsigned int fsample_keymap[] = {
-	KEY(0, 0, KEY_UP),
-	KEY(1, 0, KEY_RIGHT),
-	KEY(2, 0, KEY_LEFT),
-	KEY(3, 0, KEY_DOWN),
-	KEY(4, 0, KEY_ENTER),
-	KEY(0, 1, KEY_F10),
-	KEY(1, 1, KEY_SEND),
-	KEY(2, 1, KEY_END),
-	KEY(3, 1, KEY_VOLUMEDOWN),
-	KEY(4, 1, KEY_VOLUMEUP),
-	KEY(5, 1, KEY_RECORD),
-	KEY(0, 2, KEY_F9),
-	KEY(1, 2, KEY_3),
-	KEY(2, 2, KEY_6),
-	KEY(3, 2, KEY_9),
-	KEY(4, 2, KEY_KPDOT),
-	KEY(0, 3, KEY_BACK),
-	KEY(1, 3, KEY_2),
-	KEY(2, 3, KEY_5),
-	KEY(3, 3, KEY_8),
-	KEY(4, 3, KEY_0),
-	KEY(5, 3, KEY_KPSLASH),
-	KEY(0, 4, KEY_HOME),
-	KEY(1, 4, KEY_1),
-	KEY(2, 4, KEY_4),
-	KEY(3, 4, KEY_7),
-	KEY(4, 4, KEY_KPASTERISK),
-	KEY(5, 4, KEY_POWER),
-};
-
-static struct smc91x_platdata smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= H2P2_DBG_FPGA_ETHR_START,	/* Physical */
-		.end	= H2P2_DBG_FPGA_ETHR_START + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= INT_7XX_MPU_EXT_NIRQ,
-		.end	= 0,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static void __init fsample_init_smc91x(void)
-{
-	__raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET);
-	mdelay(50);
-	__raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1,
-		   H2P2_DBG_FPGA_LAN_RESET);
-	mdelay(50);
-}
-
-static struct mtd_partition nor_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-	      .name		= "bootloader",
-	      .offset		= 0,
-	      .size		= SZ_128K,
-	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-	      .name		= "params",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_128K,
-	      .mask_flags	= 0,
-	},
-	/* kernel */
-	{
-	      .name		= "kernel",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_2M,
-	      .mask_flags	= 0
-	},
-	/* rest of flash is a file system */
-	{
-	      .name		= "rootfs",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= MTDPART_SIZ_FULL,
-	      .mask_flags	= 0
-	},
-};
-
-static struct physmap_flash_data nor_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-	.parts		= nor_partitions,
-	.nr_parts	= ARRAY_SIZE(nor_partitions),
-};
-
-static struct resource nor_resource = {
-	.start		= OMAP_CS0_PHYS,
-	.end		= OMAP_CS0_PHYS + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device nor_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &nor_data,
-	},
-	.num_resources	= 1,
-	.resource	= &nor_resource,
-};
-
-#define FSAMPLE_NAND_RB_GPIO_PIN	62
-
-static int nand_dev_ready(struct nand_chip *chip)
-{
-	return gpio_get_value(FSAMPLE_NAND_RB_GPIO_PIN);
-}
-
-static struct platform_nand_data nand_data = {
-	.chip	= {
-		.nr_chips		= 1,
-		.chip_offset		= 0,
-		.options		= NAND_SAMSUNG_LP_OPTIONS,
-	},
-	.ctrl	= {
-		.cmd_ctrl	= omap1_nand_cmd_ctl,
-		.dev_ready	= nand_dev_ready,
-	},
-};
-
-static struct resource nand_resource = {
-	.start		= OMAP_CS3_PHYS,
-	.end		= OMAP_CS3_PHYS + SZ_4K - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device nand_device = {
-	.name		= "gen_nand",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &nand_data,
-	},
-	.num_resources	= 1,
-	.resource	= &nand_resource,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct resource kp_resources[] = {
-	[0] = {
-		.start	= INT_7XX_MPUIO_KEYPAD,
-		.end	= INT_7XX_MPUIO_KEYPAD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static const struct matrix_keymap_data fsample_keymap_data = {
-	.keymap		= fsample_keymap,
-	.keymap_size	= ARRAY_SIZE(fsample_keymap),
-};
-
-static struct omap_kp_platform_data kp_data = {
-	.rows		= 8,
-	.cols		= 8,
-	.keymap_data	= &fsample_keymap_data,
-	.delay		= 4,
-};
-
-static struct platform_device kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(kp_resources),
-	.resource	= kp_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&nor_device,
-	&nand_device,
-	&smc91x_device,
-	&kp_device,
-};
-
-static const struct omap_lcd_config fsample_lcd_config = {
-	.ctrl_name	= "internal",
-};
-
-static void __init omap_fsample_init(void)
-{
-	/* Early, board-dependent init */
-
-	/*
-	 * Hold GSM Reset until needed
-	 */
-	omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
-
-	/*
-	 * UARTs -> done automagically by 8250 driver
-	 */
-
-	/*
-	 * CSx timings, GPIO Mux ... setup
-	 */
-
-	/* Flash: CS0 timings setup */
-	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
-	omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
-
-	/*
-	 * Ethernet support through the debug board
-	 * CS1 timings setup
-	 */
-	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
-	omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
-
-	/*
-	 * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
-	 * It is used as the Ethernet controller interrupt
-	 */
-	omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF,
-			OMAP7XX_IO_CONF_9);
-
-	fsample_init_smc91x();
-
-	BUG_ON(gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0);
-	gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN);
-
-	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
-	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
-
-	/* Mux pins for keypad */
-	omap_cfg_reg(E2_7XX_KBR0);
-	omap_cfg_reg(J7_7XX_KBR1);
-	omap_cfg_reg(E1_7XX_KBR2);
-	omap_cfg_reg(F3_7XX_KBR3);
-	omap_cfg_reg(D2_7XX_KBR4);
-	omap_cfg_reg(C2_7XX_KBC0);
-	omap_cfg_reg(D3_7XX_KBC1);
-	omap_cfg_reg(E4_7XX_KBC2);
-	omap_cfg_reg(F4_7XX_KBC3);
-	omap_cfg_reg(E3_7XX_KBC4);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	omap_serial_init();
-	omap_register_i2c_bus(1, 100, NULL, 0);
-
-	omapfb_set_lcd_config(&fsample_lcd_config);
-}
-
-/* Only FPGA needs to be mapped here. All others are done with ioremap */
-static struct map_desc omap_fsample_io_desc[] __initdata = {
-	{
-		.virtual	= H2P2_DBG_FPGA_BASE,
-		.pfn		= __phys_to_pfn(H2P2_DBG_FPGA_START),
-		.length		= H2P2_DBG_FPGA_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= FSAMPLE_CPLD_BASE,
-		.pfn		= __phys_to_pfn(FSAMPLE_CPLD_START),
-		.length		= FSAMPLE_CPLD_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init omap_fsample_map_io(void)
-{
-	omap15xx_map_io();
-	iotable_init(omap_fsample_io_desc,
-		     ARRAY_SIZE(omap_fsample_io_desc));
-}
-
-MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
-/* Maintainer: Brian Swetland <swetland@google.com> */
-	.atag_offset	= 0x100,
-	.map_io		= omap_fsample_map_io,
-	.init_early	= omap1_init_early,
-	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
-	.init_machine	= omap_fsample_init,
-	.init_late	= omap1_init_late,
-	.init_time	= omap1_timer_init,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
deleted file mode 100644
index 3b2bcaf4bb01..000000000000
--- a/arch/arm/mach-omap1/board-generic.c
+++ /dev/null
@@ -1,85 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-generic.c
- *
- * Modified from board-innovator1510.c
- *
- * Code for generic OMAP board. Should work on many OMAP systems where
- * the device drivers take care of all the necessary hardware initialization.
- * Do not put any board specific code to this file; create a new machine
- * type if you need custom low-level initializations.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "hardware.h"
-#include "mux.h"
-#include "usb.h"
-#include "common.h"
-
-/* assume no Mini-AB port */
-
-#ifdef CONFIG_ARCH_OMAP15XX
-static struct omap_usb_config generic1510_usb_config __initdata = {
-	.register_host	= 1,
-	.register_dev	= 1,
-	.hmc_mode	= 16,
-	.pins[0]	= 3,
-};
-#endif
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-static struct omap_usb_config generic1610_usb_config __initdata = {
-#ifdef CONFIG_USB_OTG
-	.otg		= 1,
-#endif
-	.register_host	= 1,
-	.register_dev	= 1,
-	.hmc_mode	= 16,
-	.pins[0]	= 6,
-};
-#endif
-
-static void __init omap_generic_init(void)
-{
-#ifdef CONFIG_ARCH_OMAP15XX
-	if (cpu_is_omap15xx()) {
-		/* mux pins for uarts */
-		omap_cfg_reg(UART1_TX);
-		omap_cfg_reg(UART1_RTS);
-		omap_cfg_reg(UART2_TX);
-		omap_cfg_reg(UART2_RTS);
-		omap_cfg_reg(UART3_TX);
-		omap_cfg_reg(UART3_RX);
-
-		omap1_usb_init(&generic1510_usb_config);
-	}
-#endif
-#if defined(CONFIG_ARCH_OMAP16XX)
-	if (!cpu_is_omap1510()) {
-		omap1_usb_init(&generic1610_usb_config);
-	}
-#endif
-
-	omap_serial_init();
-	omap_register_i2c_bus(1, 100, NULL, 0);
-}
-
-MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
-	/* Maintainer: Tony Lindgren <tony@atomide.com> */
-	.atag_offset	= 0x100,
-	.map_io		= omap16xx_map_io,
-	.init_early	= omap1_init_early,
-	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
-	.init_machine	= omap_generic_init,
-	.init_late	= omap1_init_late,
-	.init_time	= omap1_timer_init,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
deleted file mode 100644
index 06c5404078aa..000000000000
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ /dev/null
@@ -1,74 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-h2-mmc.c
- *
- * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT
- * Author: Felipe Balbi <felipe.lima@indt.org.br>
- *
- * This code is based on linux/arch/arm/mach-omap2/board-n800-mmc.c, which is:
- * Copyright (C) 2006 Nokia Corporation
- */
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/gpio-omap.h>
-#include <linux/mfd/tps65010.h>
-
-#include "board-h2.h"
-#include "mmc.h"
-
-#if IS_ENABLED(CONFIG_MMC_OMAP)
-
-static int mmc_set_power(struct device *dev, int slot, int power_on,
-				int vdd)
-{
-	gpio_set_value(H2_TPS_GPIO_MMC_PWR_EN, power_on);
-	return 0;
-}
-
-static int mmc_late_init(struct device *dev)
-{
-	int ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power");
-	if (ret < 0)
-		return ret;
-
-	gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 0);
-
-	return ret;
-}
-
-static void mmc_cleanup(struct device *dev)
-{
-	gpio_free(H2_TPS_GPIO_MMC_PWR_EN);
-}
-
-/*
- * H2 could use the following functions tested:
- * - mmc_get_cover_state that uses OMAP_MPUIO(1)
- * - mmc_get_wp that uses OMAP_MPUIO(3)
- */
-static struct omap_mmc_platform_data mmc1_data = {
-	.nr_slots                       = 1,
-	.init				= mmc_late_init,
-	.cleanup			= mmc_cleanup,
-	.slots[0]       = {
-		.set_power              = mmc_set_power,
-		.ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
-		.name                   = "mmcblk",
-	},
-};
-
-static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC];
-
-void __init h2_mmc_init(void)
-{
-	mmc_data[0] = &mmc1_data;
-	omap1_init_mmc(mmc_data, OMAP16XX_NR_MMC);
-}
-
-#else
-
-void __init h2_mmc_init(void)
-{
-}
-
-#endif
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
deleted file mode 100644
index f28a4c3ea501..000000000000
--- a/arch/arm/mach-omap1/board-h2.c
+++ /dev/null
@@ -1,448 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-h2.c
- *
- * Board specific inits for OMAP-1610 H2
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Copyright (C) 2002 MontaVista Software, Inc.
- *
- * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
- * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
- *
- * H2 specific changes and cleanup
- * Copyright (C) 2004 Nokia Corporation by Imre Deak <imre.deak@nokia.com>
- */
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/platnand.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/mfd/tps65010.h>
-#include <linux/smc91x.h>
-#include <linux/omapfb.h>
-#include <linux/omap-dma.h>
-#include <linux/platform_data/gpio-omap.h>
-#include <linux/platform_data/keypad-omap.h>
-#include <linux/leds.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "tc.h"
-#include "mux.h"
-#include "flash.h"
-#include "hardware.h"
-#include "usb.h"
-#include "common.h"
-#include "board-h2.h"
-
-/* The first 16 SoC GPIO lines are on this GPIO chip */
-#define OMAP_GPIO_LABEL			"gpio-0-15"
-
-/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
-#define OMAP1610_ETHR_START		0x04000300
-
-static const unsigned int h2_keymap[] = {
-	KEY(0, 0, KEY_LEFT),
-	KEY(1, 0, KEY_RIGHT),
-	KEY(2, 0, KEY_3),
-	KEY(3, 0, KEY_F10),
-	KEY(4, 0, KEY_F5),
-	KEY(5, 0, KEY_9),
-	KEY(0, 1, KEY_DOWN),
-	KEY(1, 1, KEY_UP),
-	KEY(2, 1, KEY_2),
-	KEY(3, 1, KEY_F9),
-	KEY(4, 1, KEY_F7),
-	KEY(5, 1, KEY_0),
-	KEY(0, 2, KEY_ENTER),
-	KEY(1, 2, KEY_6),
-	KEY(2, 2, KEY_1),
-	KEY(3, 2, KEY_F2),
-	KEY(4, 2, KEY_F6),
-	KEY(5, 2, KEY_HOME),
-	KEY(0, 3, KEY_8),
-	KEY(1, 3, KEY_5),
-	KEY(2, 3, KEY_F12),
-	KEY(3, 3, KEY_F3),
-	KEY(4, 3, KEY_F8),
-	KEY(5, 3, KEY_END),
-	KEY(0, 4, KEY_7),
-	KEY(1, 4, KEY_4),
-	KEY(2, 4, KEY_F11),
-	KEY(3, 4, KEY_F1),
-	KEY(4, 4, KEY_F4),
-	KEY(5, 4, KEY_ESC),
-	KEY(0, 5, KEY_F13),
-	KEY(1, 5, KEY_F14),
-	KEY(2, 5, KEY_F15),
-	KEY(3, 5, KEY_F16),
-	KEY(4, 5, KEY_SLEEP),
-};
-
-static struct mtd_partition h2_nor_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-	      .name		= "bootloader",
-	      .offset		= 0,
-	      .size		= SZ_128K,
-	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-	      .name		= "params",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_128K,
-	      .mask_flags	= 0,
-	},
-	/* kernel */
-	{
-	      .name		= "kernel",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_2M,
-	      .mask_flags	= 0
-	},
-	/* file system */
-	{
-	      .name		= "filesystem",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= MTDPART_SIZ_FULL,
-	      .mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data h2_nor_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-	.parts		= h2_nor_partitions,
-	.nr_parts	= ARRAY_SIZE(h2_nor_partitions),
-};
-
-static struct resource h2_nor_resource = {
-	/* This is on CS3, wherever it's mapped */
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device h2_nor_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &h2_nor_data,
-	},
-	.num_resources	= 1,
-	.resource	= &h2_nor_resource,
-};
-
-static struct mtd_partition h2_nand_partitions[] = {
-#if 0
-	/* REVISIT:  enable these partitions if you make NAND BOOT
-	 * work on your H2 (rev C or newer); published versions of
-	 * x-load only support P2 and H3.
-	 */
-	{
-		.name		= "xloader",
-		.offset		= 0,
-		.size		= 64 * 1024,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "bootloader",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 256 * 1024,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 192 * 1024,
-	},
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 2 * SZ_1M,
-	},
-#endif
-	{
-		.name		= "filesystem",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,
-	},
-};
-
-#define H2_NAND_RB_GPIO_PIN	62
-
-static int h2_nand_dev_ready(struct nand_chip *chip)
-{
-	return gpio_get_value(H2_NAND_RB_GPIO_PIN);
-}
-
-static struct platform_nand_data h2_nand_platdata = {
-	.chip	= {
-		.nr_chips		= 1,
-		.chip_offset		= 0,
-		.nr_partitions		= ARRAY_SIZE(h2_nand_partitions),
-		.partitions		= h2_nand_partitions,
-		.options		= NAND_SAMSUNG_LP_OPTIONS,
-	},
-	.ctrl	= {
-		.cmd_ctrl	= omap1_nand_cmd_ctl,
-		.dev_ready	= h2_nand_dev_ready,
-	},
-};
-
-static struct resource h2_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device h2_nand_device = {
-	.name		= "gen_nand",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &h2_nand_platdata,
-	},
-	.num_resources	= 1,
-	.resource	= &h2_nand_resource,
-};
-
-static struct smc91x_platdata h2_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct resource h2_smc91x_resources[] = {
-	[0] = {
-		.start	= OMAP1610_ETHR_START,		/* Physical */
-		.end	= OMAP1610_ETHR_START + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct platform_device h2_smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &h2_smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(h2_smc91x_resources),
-	.resource	= h2_smc91x_resources,
-};
-
-static struct resource h2_kp_resources[] = {
-	[0] = {
-		.start	= INT_KEYBOARD,
-		.end	= INT_KEYBOARD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static const struct matrix_keymap_data h2_keymap_data = {
-	.keymap		= h2_keymap,
-	.keymap_size	= ARRAY_SIZE(h2_keymap),
-};
-
-static struct omap_kp_platform_data h2_kp_data = {
-	.rows		= 8,
-	.cols		= 8,
-	.keymap_data	= &h2_keymap_data,
-	.rep		= true,
-	.delay		= 9,
-	.dbounce	= true,
-};
-
-static struct platform_device h2_kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &h2_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(h2_kp_resources),
-	.resource	= h2_kp_resources,
-};
-
-static const struct gpio_led h2_gpio_led_pins[] = {
-	{
-		.name		= "h2:red",
-		.default_trigger = "heartbeat",
-		.gpio		= 3,
-	},
-	{
-		.name		= "h2:green",
-		.default_trigger = "cpu0",
-		.gpio		= OMAP_MPUIO(4),
-	},
-};
-
-static struct gpio_led_platform_data h2_gpio_led_data = {
-	.leds		= h2_gpio_led_pins,
-	.num_leds	= ARRAY_SIZE(h2_gpio_led_pins),
-};
-
-static struct platform_device h2_gpio_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &h2_gpio_led_data,
-	},
-};
-
-static struct platform_device *h2_devices[] __initdata = {
-	&h2_nor_device,
-	&h2_nand_device,
-	&h2_smc91x_device,
-	&h2_kp_device,
-	&h2_gpio_leds,
-};
-
-static void __init h2_init_smc91x(void)
-{
-	if (gpio_request(0, "SMC91x irq") < 0) {
-		printk("Error requesting gpio 0 for smc91x irq\n");
-		return;
-	}
-}
-
-static int tps_setup(struct i2c_client *client, void *context)
-{
-	if (!IS_BUILTIN(CONFIG_TPS65010))
-		return -ENOSYS;
-
-	tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V |
-				TPS_LDO1_ENABLE | TPS_VLDO1_3_0V);
-
-	return 0;
-}
-
-static struct tps65010_board tps_board = {
-	.base		= H2_TPS_GPIO_BASE,
-	.outmask	= 0x0f,
-	.setup		= tps_setup,
-};
-
-static struct i2c_board_info __initdata h2_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("tps65010", 0x48),
-		.platform_data	= &tps_board,
-	}, {
-		.type = "isp1301_omap",
-		.addr = 0x2d,
-		.dev_name = "isp1301",
-	},
-};
-
-static struct gpiod_lookup_table isp1301_gpiod_table = {
-	.dev_id = "isp1301",
-	.table = {
-		/* Active low since the irq triggers on falling edge */
-		GPIO_LOOKUP(OMAP_GPIO_LABEL, 2,
-			    NULL, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct omap_usb_config h2_usb_config __initdata = {
-	/* usb1 has a Mini-AB port and external isp1301 transceiver */
-	.otg		= 2,
-
-#if IS_ENABLED(CONFIG_USB_OMAP)
-	.hmc_mode	= 19,	/* 0:host(off) 1:dev|otg 2:disabled */
-	/* .hmc_mode	= 21,*/	/* 0:host(off) 1:dev(loopback) 2:host(loopback) */
-#elif	IS_ENABLED(CONFIG_USB_OHCI_HCD)
-	/* needs OTG cable, or NONSTANDARD (B-to-MiniB) */
-	.hmc_mode	= 20,	/* 1:dev|otg(off) 1:host 2:disabled */
-#endif
-
-	.pins[1]	= 3,
-};
-
-static const struct omap_lcd_config h2_lcd_config __initconst = {
-	.ctrl_name	= "internal",
-};
-
-static void __init h2_init(void)
-{
-	h2_init_smc91x();
-
-	/* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
-	 * to address 0 by a dip switch), NAND on CS2B.  The NAND driver will
-	 * notice whether a NAND chip is enabled at probe time.
-	 *
-	 * FIXME revC boards (and H3) support NAND-boot, with a dip switch to
-	 * put NOR on CS2B and NAND (which on H2 may be 16bit) on CS3.  Try
-	 * detecting that in code here, to avoid probing every possible flash
-	 * configuration...
-	 */
-	h2_nor_resource.end = h2_nor_resource.start = omap_cs3_phys();
-	h2_nor_resource.end += SZ_32M - 1;
-
-	h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS;
-	h2_nand_resource.end += SZ_4K - 1;
-	BUG_ON(gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0);
-	gpio_direction_input(H2_NAND_RB_GPIO_PIN);
-
-	gpiod_add_lookup_table(&isp1301_gpiod_table);
-
-	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
-	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
-
-	/* MMC:  card detect and WP */
-	/* omap_cfg_reg(U19_ARMIO1); */		/* CD */
-	omap_cfg_reg(BALLOUT_V8_ARMIO3);	/* WP */
-
-	/* Mux pins for keypad */
-	omap_cfg_reg(F18_1610_KBC0);
-	omap_cfg_reg(D20_1610_KBC1);
-	omap_cfg_reg(D19_1610_KBC2);
-	omap_cfg_reg(E18_1610_KBC3);
-	omap_cfg_reg(C21_1610_KBC4);
-	omap_cfg_reg(G18_1610_KBR0);
-	omap_cfg_reg(F19_1610_KBR1);
-	omap_cfg_reg(H14_1610_KBR2);
-	omap_cfg_reg(E20_1610_KBR3);
-	omap_cfg_reg(E19_1610_KBR4);
-	omap_cfg_reg(N19_1610_KBR5);
-
-	/* GPIO based LEDs */
-	omap_cfg_reg(P18_1610_GPIO3);
-	omap_cfg_reg(MPUIO4);
-
-	h2_smc91x_resources[1].start = gpio_to_irq(0);
-	h2_smc91x_resources[1].end = gpio_to_irq(0);
-	platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
-	omap_serial_init();
-
-	/* ISP1301 IRQ wired at M14 */
-	omap_cfg_reg(M14_1510_GPIO2);
-	h2_i2c_board_info[0].irq = gpio_to_irq(58);
-	omap_register_i2c_bus(1, 100, h2_i2c_board_info,
-			      ARRAY_SIZE(h2_i2c_board_info));
-	omap1_usb_init(&h2_usb_config);
-	h2_mmc_init();
-
-	omapfb_set_lcd_config(&h2_lcd_config);
-}
-
-MACHINE_START(OMAP_H2, "TI-H2")
-	/* Maintainer: Imre Deak <imre.deak@nokia.com> */
-	.atag_offset	= 0x100,
-	.map_io		= omap16xx_map_io,
-	.init_early     = omap1_init_early,
-	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
-	.init_machine	= h2_init,
-	.init_late	= omap1_init_late,
-	.init_time	= omap1_timer_init,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h2.h b/arch/arm/mach-omap1/board-h2.h
deleted file mode 100644
index 315e2662547e..000000000000
--- a/arch/arm/mach-omap1/board-h2.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * arch/arm/mach-omap1/board-h2.h
- *
- * Hardware definitions for TI OMAP1610 H2 board.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_H2_H
-#define __ASM_ARCH_OMAP_H2_H
-
-#define H2_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
-#	define H2_TPS_GPIO_MMC_PWR_EN	(H2_TPS_GPIO_BASE + 3)
-
-extern void h2_mmc_init(void);
-
-#endif /*  __ASM_ARCH_OMAP_H2_H */
-
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
deleted file mode 100644
index f595bd4f5024..000000000000
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ /dev/null
@@ -1,64 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-h3-mmc.c
- *
- * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT
- * Author: Felipe Balbi <felipe.lima@indt.org.br>
- *
- * This code is based on linux/arch/arm/mach-omap2/board-n800-mmc.c, which is:
- * Copyright (C) 2006 Nokia Corporation
- */
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <linux/mfd/tps65010.h>
-
-#include "common.h"
-#include "board-h3.h"
-#include "mmc.h"
-
-#if IS_ENABLED(CONFIG_MMC_OMAP)
-
-static int mmc_set_power(struct device *dev, int slot, int power_on,
-				int vdd)
-{
-	gpio_set_value(H3_TPS_GPIO_MMC_PWR_EN, power_on);
-	return 0;
-}
-
-/*
- * H3 could use the following functions tested:
- * - mmc_get_cover_state that uses OMAP_MPUIO(1)
- * - mmc_get_wp that maybe uses OMAP_MPUIO(3)
- */
-static struct omap_mmc_platform_data mmc1_data = {
-	.nr_slots                       = 1,
-	.slots[0]       = {
-		.set_power              = mmc_set_power,
-		.ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
-		.name                   = "mmcblk",
-	},
-};
-
-static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC];
-
-void __init h3_mmc_init(void)
-{
-	int ret;
-
-	ret = gpio_request(H3_TPS_GPIO_MMC_PWR_EN, "MMC power");
-	if (ret < 0)
-		return;
-	gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 0);
-
-	mmc_data[0] = &mmc1_data;
-	omap1_init_mmc(mmc_data, OMAP16XX_NR_MMC);
-}
-
-#else
-
-void __init h3_mmc_init(void)
-{
-}
-
-#endif
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
deleted file mode 100644
index 1e4c57710fcc..000000000000
--- a/arch/arm/mach-omap1/board-h3.c
+++ /dev/null
@@ -1,455 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-h3.c
- *
- * This file contains OMAP1710 H3 specific code.
- *
- * Copyright (C) 2004 Texas Instruments, Inc.
- * Copyright (C) 2002 MontaVista Software, Inc.
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: RidgeRun, Inc.
- *         Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com
- */
-#include <linux/gpio.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/major.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/errno.h>
-#include <linux/workqueue.h>
-#include <linux/i2c.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/platnand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/tps65010.h>
-#include <linux/smc91x.h>
-#include <linux/omapfb.h>
-#include <linux/platform_data/gpio-omap.h>
-#include <linux/platform_data/keypad-omap.h>
-#include <linux/omap-dma.h>
-#include <linux/leds.h>
-
-#include <asm/setup.h>
-#include <asm/page.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "tc.h"
-#include "mux.h"
-#include "flash.h"
-#include "hardware.h"
-#include "irqs.h"
-#include "usb.h"
-#include "common.h"
-#include "board-h3.h"
-
-/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
-#define OMAP1710_ETHR_START		0x04000300
-
-#define H3_TS_GPIO	48
-
-static const unsigned int h3_keymap[] = {
-	KEY(0, 0, KEY_LEFT),
-	KEY(1, 0, KEY_RIGHT),
-	KEY(2, 0, KEY_3),
-	KEY(3, 0, KEY_F10),
-	KEY(4, 0, KEY_F5),
-	KEY(5, 0, KEY_9),
-	KEY(0, 1, KEY_DOWN),
-	KEY(1, 1, KEY_UP),
-	KEY(2, 1, KEY_2),
-	KEY(3, 1, KEY_F9),
-	KEY(4, 1, KEY_F7),
-	KEY(5, 1, KEY_0),
-	KEY(0, 2, KEY_ENTER),
-	KEY(1, 2, KEY_6),
-	KEY(2, 2, KEY_1),
-	KEY(3, 2, KEY_F2),
-	KEY(4, 2, KEY_F6),
-	KEY(5, 2, KEY_HOME),
-	KEY(0, 3, KEY_8),
-	KEY(1, 3, KEY_5),
-	KEY(2, 3, KEY_F12),
-	KEY(3, 3, KEY_F3),
-	KEY(4, 3, KEY_F8),
-	KEY(5, 3, KEY_END),
-	KEY(0, 4, KEY_7),
-	KEY(1, 4, KEY_4),
-	KEY(2, 4, KEY_F11),
-	KEY(3, 4, KEY_F1),
-	KEY(4, 4, KEY_F4),
-	KEY(5, 4, KEY_ESC),
-	KEY(0, 5, KEY_F13),
-	KEY(1, 5, KEY_F14),
-	KEY(2, 5, KEY_F15),
-	KEY(3, 5, KEY_F16),
-	KEY(4, 5, KEY_SLEEP),
-};
-
-
-static struct mtd_partition nor_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-	      .name		= "bootloader",
-	      .offset		= 0,
-	      .size		= SZ_128K,
-	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-	      .name		= "params",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_128K,
-	      .mask_flags	= 0,
-	},
-	/* kernel */
-	{
-	      .name		= "kernel",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_2M,
-	      .mask_flags	= 0
-	},
-	/* file system */
-	{
-	      .name		= "filesystem",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= MTDPART_SIZ_FULL,
-	      .mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data nor_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-	.parts		= nor_partitions,
-	.nr_parts	= ARRAY_SIZE(nor_partitions),
-};
-
-static struct resource nor_resource = {
-	/* This is on CS3, wherever it's mapped */
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device nor_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &nor_data,
-	},
-	.num_resources	= 1,
-	.resource	= &nor_resource,
-};
-
-static struct mtd_partition nand_partitions[] = {
-#if 0
-	/* REVISIT: enable these partitions if you make NAND BOOT work */
-	{
-		.name		= "xloader",
-		.offset		= 0,
-		.size		= 64 * 1024,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "bootloader",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 256 * 1024,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 192 * 1024,
-	},
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 2 * SZ_1M,
-	},
-#endif
-	{
-		.name		= "filesystem",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,
-	},
-};
-
-#define H3_NAND_RB_GPIO_PIN	10
-
-static int nand_dev_ready(struct nand_chip *chip)
-{
-	return gpio_get_value(H3_NAND_RB_GPIO_PIN);
-}
-
-static struct platform_nand_data nand_platdata = {
-	.chip	= {
-		.nr_chips		= 1,
-		.chip_offset		= 0,
-		.nr_partitions		= ARRAY_SIZE(nand_partitions),
-		.partitions		= nand_partitions,
-		.options		= NAND_SAMSUNG_LP_OPTIONS,
-	},
-	.ctrl	= {
-		.cmd_ctrl	= omap1_nand_cmd_ctl,
-		.dev_ready	= nand_dev_ready,
-
-	},
-};
-
-static struct resource nand_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device nand_device = {
-	.name		= "gen_nand",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &nand_platdata,
-	},
-	.num_resources	= 1,
-	.resource	= &nand_resource,
-};
-
-static struct smc91x_platdata smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= OMAP1710_ETHR_START,		/* Physical */
-		.end	= OMAP1710_ETHR_START + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static void __init h3_init_smc91x(void)
-{
-	omap_cfg_reg(W15_1710_GPIO40);
-	if (gpio_request(40, "SMC91x irq") < 0) {
-		printk("Error requesting gpio 40 for smc91x irq\n");
-		return;
-	}
-}
-
-#define GPTIMER_BASE		0xFFFB1400
-#define GPTIMER_REGS(x)	(0xFFFB1400 + (x * 0x800))
-#define GPTIMER_REGS_SIZE	0x46
-
-static struct resource intlat_resources[] = {
-	[0] = {
-		.start  = GPTIMER_REGS(0),	      /* Physical */
-		.end    = GPTIMER_REGS(0) + GPTIMER_REGS_SIZE,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = INT_1610_GPTIMER1,
-		.end    = INT_1610_GPTIMER1,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device intlat_device = {
-	.name	   = "omap_intlat",
-	.id	     = 0,
-	.num_resources  = ARRAY_SIZE(intlat_resources),
-	.resource       = intlat_resources,
-};
-
-static struct resource h3_kp_resources[] = {
-	[0] = {
-		.start	= INT_KEYBOARD,
-		.end	= INT_KEYBOARD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static const struct matrix_keymap_data h3_keymap_data = {
-	.keymap		= h3_keymap,
-	.keymap_size	= ARRAY_SIZE(h3_keymap),
-};
-
-static struct omap_kp_platform_data h3_kp_data = {
-	.rows		= 8,
-	.cols		= 8,
-	.keymap_data	= &h3_keymap_data,
-	.rep		= true,
-	.delay		= 9,
-	.dbounce	= true,
-};
-
-static struct platform_device h3_kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &h3_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(h3_kp_resources),
-	.resource	= h3_kp_resources,
-};
-
-static struct platform_device h3_lcd_device = {
-	.name		= "lcd_h3",
-	.id		= -1,
-};
-
-static struct spi_board_info h3_spi_board_info[] __initdata = {
-	[0] = {
-		.modalias	= "tsc2101",
-		.bus_num	= 2,
-		.chip_select	= 0,
-		.max_speed_hz	= 16000000,
-		/* .platform_data	= &tsc_platform_data, */
-	},
-};
-
-static const struct gpio_led h3_gpio_led_pins[] = {
-	{
-		.name		= "h3:red",
-		.default_trigger = "heartbeat",
-		.gpio		= 3,
-	},
-	{
-		.name		= "h3:green",
-		.default_trigger = "cpu0",
-		.gpio		= OMAP_MPUIO(4),
-	},
-};
-
-static struct gpio_led_platform_data h3_gpio_led_data = {
-	.leds		= h3_gpio_led_pins,
-	.num_leds	= ARRAY_SIZE(h3_gpio_led_pins),
-};
-
-static struct platform_device h3_gpio_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &h3_gpio_led_data,
-	},
-};
-
-static struct platform_device *devices[] __initdata = {
-	&nor_device,
-	&nand_device,
-        &smc91x_device,
-	&intlat_device,
-	&h3_kp_device,
-	&h3_lcd_device,
-	&h3_gpio_leds,
-};
-
-static struct omap_usb_config h3_usb_config __initdata = {
-	/* usb1 has a Mini-AB port and external isp1301 transceiver */
-	.otg	    = 2,
-
-#if IS_ENABLED(CONFIG_USB_OMAP)
-	.hmc_mode       = 19,   /* 0:host(off) 1:dev|otg 2:disabled */
-#elif IS_ENABLED(CONFIG_USB_OHCI_HCD)
-	/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
-	.hmc_mode       = 20,   /* 1:dev|otg(off) 1:host 2:disabled */
-#endif
-
-	.pins[1]	= 3,
-};
-
-static const struct omap_lcd_config h3_lcd_config __initconst = {
-	.ctrl_name	= "internal",
-};
-
-static struct i2c_board_info __initdata h3_i2c_board_info[] = {
-       {
-		I2C_BOARD_INFO("tps65013", 0x48),
-       },
-	{
-		I2C_BOARD_INFO("isp1301_omap", 0x2d),
-	},
-};
-
-static void __init h3_init(void)
-{
-	h3_init_smc91x();
-
-	/* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
-	 * to address 0 by a dip switch), NAND on CS2B.  The NAND driver will
-	 * notice whether a NAND chip is enabled at probe time.
-	 *
-	 * H3 support NAND-boot, with a dip switch to put NOR on CS2B and NAND
-	 * (which on H2 may be 16bit) on CS3.  Try detecting that in code here,
-	 * to avoid probing every possible flash configuration...
-	 */
-	nor_resource.end = nor_resource.start = omap_cs3_phys();
-	nor_resource.end += SZ_32M - 1;
-
-	nand_resource.end = nand_resource.start = OMAP_CS2B_PHYS;
-	nand_resource.end += SZ_4K - 1;
-	BUG_ON(gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0);
-	gpio_direction_input(H3_NAND_RB_GPIO_PIN);
-
-	/* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */
-	/* GPIO10 pullup/down register, Enable pullup on GPIO10 */
-	omap_cfg_reg(V2_1710_GPIO10);
-
-	/* Mux pins for keypad */
-	omap_cfg_reg(F18_1610_KBC0);
-	omap_cfg_reg(D20_1610_KBC1);
-	omap_cfg_reg(D19_1610_KBC2);
-	omap_cfg_reg(E18_1610_KBC3);
-	omap_cfg_reg(C21_1610_KBC4);
-	omap_cfg_reg(G18_1610_KBR0);
-	omap_cfg_reg(F19_1610_KBR1);
-	omap_cfg_reg(H14_1610_KBR2);
-	omap_cfg_reg(E20_1610_KBR3);
-	omap_cfg_reg(E19_1610_KBR4);
-	omap_cfg_reg(N19_1610_KBR5);
-
-	/* GPIO based LEDs */
-	omap_cfg_reg(P18_1610_GPIO3);
-	omap_cfg_reg(MPUIO4);
-
-	smc91x_resources[1].start = gpio_to_irq(40);
-	smc91x_resources[1].end = gpio_to_irq(40);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	h3_spi_board_info[0].irq = gpio_to_irq(H3_TS_GPIO);
-	spi_register_board_info(h3_spi_board_info,
-				ARRAY_SIZE(h3_spi_board_info));
-	omap_serial_init();
-	h3_i2c_board_info[1].irq = gpio_to_irq(14);
-	omap_register_i2c_bus(1, 100, h3_i2c_board_info,
-			      ARRAY_SIZE(h3_i2c_board_info));
-	omap1_usb_init(&h3_usb_config);
-	h3_mmc_init();
-
-	omapfb_set_lcd_config(&h3_lcd_config);
-}
-
-MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
-	/* Maintainer: Texas Instruments, Inc. */
-	.atag_offset	= 0x100,
-	.map_io		= omap16xx_map_io,
-	.init_early     = omap1_init_early,
-	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
-	.init_machine	= h3_init,
-	.init_late	= omap1_init_late,
-	.init_time	= omap1_timer_init,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h3.h b/arch/arm/mach-omap1/board-h3.h
deleted file mode 100644
index 78de535be3c5..000000000000
--- a/arch/arm/mach-omap1/board-h3.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/arm/mach-omap1/board-h3.h
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __ASM_ARCH_OMAP_H3_H
-#define __ASM_ARCH_OMAP_H3_H
-
-#define H3_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
-#	define H3_TPS_GPIO_MMC_PWR_EN	(H3_TPS_GPIO_BASE + 4)
-
-extern void h3_mmc_init(void);
-
-#endif /*  __ASM_ARCH_OMAP_H3_H */
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
deleted file mode 100644
index 291d294b5824..000000000000
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ /dev/null
@@ -1,585 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * HTC Herald board configuration
- * Copyright (C) 2009 Cory Maccarrone <darkstar6262@gmail.com>
- * Copyright (C) 2009 Wing Linux
- *
- * Based on the board-htcwizard.c file from the linwizard project:
- * Copyright (C) 2006 Unai Uribarri
- * Copyright (C) 2008 linwizard.sourceforge.net
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-gpio.h>
-#include <linux/htcpld.h>
-#include <linux/leds.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/omapfb.h>
-#include <linux/platform_data/keypad-omap.h>
-#include <linux/soc/ti/omap1-io.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "hardware.h"
-#include "omap7xx.h"
-#include "mmc.h"
-#include "irqs.h"
-#include "usb.h"
-#include "common.h"
-
-/* LCD register definition */
-#define       OMAP_LCDC_CONTROL               (0xfffec000 + 0x00)
-#define       OMAP_LCDC_STATUS                (0xfffec000 + 0x10)
-#define       OMAP_DMA_LCD_CCR                (0xfffee300 + 0xc2)
-#define       OMAP_DMA_LCD_CTRL               (0xfffee300 + 0xc4)
-#define       OMAP_LCDC_CTRL_LCD_EN           (1 << 0)
-#define       OMAP_LCDC_STAT_DONE             (1 << 0)
-
-/* GPIO definitions for the power button and keyboard slide switch */
-#define HTCHERALD_GPIO_POWER 139
-#define HTCHERALD_GPIO_SLIDE 174
-#define HTCHERALD_GIRQ_BTNS 141
-
-/* GPIO definitions for the touchscreen */
-#define HTCHERALD_GPIO_TS 76
-
-/* HTCPLD definitions */
-
-/*
- * CPLD Logic
- *
- * Chip 3 - 0x03
- *
- * Function            7 6 5 4  3 2 1 0
- * ------------------------------------
- * DPAD light          x x x x  x x x 1
- * SoundDev            x x x x  1 x x x
- * Screen white        1 x x x  x x x x
- * MMC power on        x x x x  x 1 x x
- * Happy times (n)     0 x x x  x 1 x x
- *
- * Chip 4 - 0x04
- *
- * Function            7 6 5 4  3 2 1 0
- * ------------------------------------
- * Keyboard light      x x x x  x x x 1
- * LCD Bright (4)      x x x x  x 1 1 x
- * LCD Bright (3)      x x x x  x 0 1 x
- * LCD Bright (2)      x x x x  x 1 0 x
- * LCD Bright (1)      x x x x  x 0 0 x
- * LCD Off             x x x x  0 x x x
- * LCD image (fb)      1 x x x  x x x x
- * LCD image (white)   0 x x x  x x x x
- * Caps lock LED       x x 1 x  x x x x
- *
- * Chip 5 - 0x05
- *
- * Function            7 6 5 4  3 2 1 0
- * ------------------------------------
- * Red (solid)         x x x x  x 1 x x
- * Red (flash)         x x x x  x x 1 x
- * Green (GSM flash)   x x x x  1 x x x
- * Green (GSM solid)   x x x 1  x x x x
- * Green (wifi flash)  x x 1 x  x x x x
- * Blue (bt flash)     x 1 x x  x x x x
- * DPAD Int Enable     1 x x x  x x x 0
- *
- * (Combinations of the above can be made for different colors.)
- * The direction pad interrupt enable must be set each time the
- * interrupt is handled.
- *
- * Chip 6 - 0x06
- *
- * Function            7 6 5 4  3 2 1 0
- * ------------------------------------
- * Vibrator            x x x x  1 x x x
- * Alt LED             x x x 1  x x x x
- * Screen white        1 x x x  x x x x
- * Screen white        x x 1 x  x x x x
- * Screen white        x 0 x x  x x x x
- * Enable kbd dpad     x x x x  x x 0 x
- * Happy Times         0 1 0 x  x x 0 x
- */
-
-/*
- * HTCPLD GPIO lines start 16 after OMAP_MAX_GPIO_LINES to account
- * for the 16 MPUIO lines.
- */
-#define HTCPLD_GPIO_START_OFFSET	(OMAP_MAX_GPIO_LINES + 16)
-#define HTCPLD_IRQ(chip, offset)	(OMAP_IRQ_END + 8 * (chip) + (offset))
-#define HTCPLD_BASE(chip, offset)	\
-	(HTCPLD_GPIO_START_OFFSET + 8 * (chip) + (offset))
-
-#define HTCPLD_GPIO_LED_DPAD		HTCPLD_BASE(0, 0)
-#define HTCPLD_GPIO_LED_KBD		HTCPLD_BASE(1, 0)
-#define HTCPLD_GPIO_LED_CAPS		HTCPLD_BASE(1, 5)
-#define HTCPLD_GPIO_LED_RED_FLASH	HTCPLD_BASE(2, 1)
-#define HTCPLD_GPIO_LED_RED_SOLID	HTCPLD_BASE(2, 2)
-#define HTCPLD_GPIO_LED_GREEN_FLASH	HTCPLD_BASE(2, 3)
-#define HTCPLD_GPIO_LED_GREEN_SOLID	HTCPLD_BASE(2, 4)
-#define HTCPLD_GPIO_LED_WIFI		HTCPLD_BASE(2, 5)
-#define HTCPLD_GPIO_LED_BT		HTCPLD_BASE(2, 6)
-#define HTCPLD_GPIO_LED_VIBRATE		HTCPLD_BASE(3, 3)
-#define HTCPLD_GPIO_LED_ALT		HTCPLD_BASE(3, 4)
-
-#define HTCPLD_GPIO_RIGHT_KBD		HTCPLD_BASE(6, 7)
-#define HTCPLD_GPIO_UP_KBD		HTCPLD_BASE(6, 6)
-#define HTCPLD_GPIO_LEFT_KBD		HTCPLD_BASE(6, 5)
-#define HTCPLD_GPIO_DOWN_KBD		HTCPLD_BASE(6, 4)
-
-#define HTCPLD_GPIO_RIGHT_DPAD		HTCPLD_BASE(7, 7)
-#define HTCPLD_GPIO_UP_DPAD		HTCPLD_BASE(7, 6)
-#define HTCPLD_GPIO_LEFT_DPAD		HTCPLD_BASE(7, 5)
-#define HTCPLD_GPIO_DOWN_DPAD		HTCPLD_BASE(7, 4)
-#define HTCPLD_GPIO_ENTER_DPAD		HTCPLD_BASE(7, 3)
-
-/* Chip 5 */
-#define HTCPLD_IRQ_RIGHT_KBD		HTCPLD_IRQ(0, 7)
-#define HTCPLD_IRQ_UP_KBD		HTCPLD_IRQ(0, 6)
-#define HTCPLD_IRQ_LEFT_KBD		HTCPLD_IRQ(0, 5)
-#define HTCPLD_IRQ_DOWN_KBD		HTCPLD_IRQ(0, 4)
-
-/* Chip 6 */
-#define HTCPLD_IRQ_RIGHT_DPAD		HTCPLD_IRQ(1, 7)
-#define HTCPLD_IRQ_UP_DPAD		HTCPLD_IRQ(1, 6)
-#define HTCPLD_IRQ_LEFT_DPAD		HTCPLD_IRQ(1, 5)
-#define HTCPLD_IRQ_DOWN_DPAD		HTCPLD_IRQ(1, 4)
-#define HTCPLD_IRQ_ENTER_DPAD		HTCPLD_IRQ(1, 3)
-
-/* Keyboard definition */
-
-static const unsigned int htc_herald_keymap[] = {
-	KEY(0, 0, KEY_RECORD), /* Mail button */
-	KEY(1, 0, KEY_CAMERA), /* Camera */
-	KEY(2, 0, KEY_PHONE), /* Send key */
-	KEY(3, 0, KEY_VOLUMEUP), /* Volume up */
-	KEY(4, 0, KEY_F2),  /* Right bar (landscape) */
-	KEY(5, 0, KEY_MAIL), /* Win key (portrait) */
-	KEY(6, 0, KEY_DIRECTORY), /* Right bar (portrait) */
-	KEY(0, 1, KEY_LEFTCTRL), /* Windows key */
-	KEY(1, 1, KEY_COMMA),
-	KEY(2, 1, KEY_M),
-	KEY(3, 1, KEY_K),
-	KEY(4, 1, KEY_SLASH), /* OK key */
-	KEY(5, 1, KEY_I),
-	KEY(6, 1, KEY_U),
-	KEY(0, 2, KEY_LEFTALT),
-	KEY(1, 2, KEY_TAB),
-	KEY(2, 2, KEY_N),
-	KEY(3, 2, KEY_J),
-	KEY(4, 2, KEY_ENTER),
-	KEY(5, 2, KEY_H),
-	KEY(6, 2, KEY_Y),
-	KEY(0, 3, KEY_SPACE),
-	KEY(1, 3, KEY_L),
-	KEY(2, 3, KEY_B),
-	KEY(3, 3, KEY_V),
-	KEY(4, 3, KEY_BACKSPACE),
-	KEY(5, 3, KEY_G),
-	KEY(6, 3, KEY_T),
-	KEY(0, 4, KEY_CAPSLOCK), /* Shift */
-	KEY(1, 4, KEY_C),
-	KEY(2, 4, KEY_F),
-	KEY(3, 4, KEY_R),
-	KEY(4, 4, KEY_O),
-	KEY(5, 4, KEY_E),
-	KEY(6, 4, KEY_D),
-	KEY(0, 5, KEY_X),
-	KEY(1, 5, KEY_Z),
-	KEY(2, 5, KEY_S),
-	KEY(3, 5, KEY_W),
-	KEY(4, 5, KEY_P),
-	KEY(5, 5, KEY_Q),
-	KEY(6, 5, KEY_A),
-	KEY(0, 6, KEY_CONNECT), /* Voice button */
-	KEY(2, 6, KEY_CANCEL), /* End key */
-	KEY(3, 6, KEY_VOLUMEDOWN), /* Volume down */
-	KEY(4, 6, KEY_F1), /* Left bar (landscape) */
-	KEY(5, 6, KEY_WWW), /* OK button (portrait) */
-	KEY(6, 6, KEY_CALENDAR), /* Left bar (portrait) */
-};
-
-static const struct matrix_keymap_data htc_herald_keymap_data = {
-	.keymap		= htc_herald_keymap,
-	.keymap_size	= ARRAY_SIZE(htc_herald_keymap),
-};
-
-static struct omap_kp_platform_data htcherald_kp_data = {
-	.rows	= 7,
-	.cols	= 7,
-	.delay = 20,
-	.rep = true,
-	.keymap_data = &htc_herald_keymap_data,
-};
-
-static struct resource kp_resources[] = {
-	[0] = {
-		.start	= INT_7XX_MPUIO_KEYPAD,
-		.end	= INT_7XX_MPUIO_KEYPAD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &htcherald_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(kp_resources),
-	.resource	= kp_resources,
-};
-
-/* GPIO buttons for keyboard slide and power button */
-static struct gpio_keys_button herald_gpio_keys_table[] = {
-	{BTN_0,  HTCHERALD_GPIO_POWER, 1, "POWER", EV_KEY, 1, 20},
-	{SW_LID, HTCHERALD_GPIO_SLIDE, 0, "SLIDE", EV_SW,  1, 20},
-
-	{KEY_LEFT,  HTCPLD_GPIO_LEFT_KBD,  1, "LEFT",  EV_KEY, 1, 20},
-	{KEY_RIGHT, HTCPLD_GPIO_RIGHT_KBD, 1, "RIGHT", EV_KEY, 1, 20},
-	{KEY_UP,    HTCPLD_GPIO_UP_KBD,    1, "UP",    EV_KEY, 1, 20},
-	{KEY_DOWN,  HTCPLD_GPIO_DOWN_KBD,  1, "DOWN",  EV_KEY, 1, 20},
-
-	{KEY_LEFT,  HTCPLD_GPIO_LEFT_DPAD,   1, "DLEFT",  EV_KEY, 1, 20},
-	{KEY_RIGHT, HTCPLD_GPIO_RIGHT_DPAD,  1, "DRIGHT", EV_KEY, 1, 20},
-	{KEY_UP,    HTCPLD_GPIO_UP_DPAD,     1, "DUP",    EV_KEY, 1, 20},
-	{KEY_DOWN,  HTCPLD_GPIO_DOWN_DPAD,   1, "DDOWN",  EV_KEY, 1, 20},
-	{KEY_ENTER, HTCPLD_GPIO_ENTER_DPAD,  1, "DENTER", EV_KEY, 1, 20},
-};
-
-static struct gpio_keys_platform_data herald_gpio_keys_data = {
-	.buttons	= herald_gpio_keys_table,
-	.nbuttons	= ARRAY_SIZE(herald_gpio_keys_table),
-	.rep		= true,
-};
-
-static struct platform_device herald_gpiokeys_device = {
-	.name      = "gpio-keys",
-	.id		= -1,
-	.dev = {
-		.platform_data = &herald_gpio_keys_data,
-	},
-};
-
-/* LEDs for the Herald.  These connect to the HTCPLD GPIO device. */
-static const struct gpio_led gpio_leds[] = {
-	{"dpad",        NULL, HTCPLD_GPIO_LED_DPAD,        0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"kbd",         NULL, HTCPLD_GPIO_LED_KBD,         0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"vibrate",     NULL, HTCPLD_GPIO_LED_VIBRATE,     0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"green_solid", NULL, HTCPLD_GPIO_LED_GREEN_SOLID, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"green_flash", NULL, HTCPLD_GPIO_LED_GREEN_FLASH, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"red_solid",   "mmc0", HTCPLD_GPIO_LED_RED_SOLID, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"red_flash",   NULL, HTCPLD_GPIO_LED_RED_FLASH,   0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"wifi",        NULL, HTCPLD_GPIO_LED_WIFI,        0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"bt",          NULL, HTCPLD_GPIO_LED_BT,          0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"caps",        NULL, HTCPLD_GPIO_LED_CAPS,        0, 0, LEDS_GPIO_DEFSTATE_OFF},
-	{"alt",         NULL, HTCPLD_GPIO_LED_ALT,         0, 0, LEDS_GPIO_DEFSTATE_OFF},
-};
-
-static struct gpio_led_platform_data gpio_leds_data = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device gpio_leds_device = {
-	.name		= "leds-gpio",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &gpio_leds_data,
-	},
-};
-
-/* HTC PLD chips */
-
-static struct resource htcpld_resources[] = {
-	[0] = {
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct htcpld_chip_platform_data htcpld_chips[] = {
-	[0] = {
-		.addr		= 0x03,
-		.reset		= 0x04,
-		.num_gpios	= 8,
-		.gpio_out_base	= HTCPLD_BASE(0, 0),
-		.gpio_in_base	= HTCPLD_BASE(4, 0),
-	},
-	[1] = {
-		.addr		= 0x04,
-		.reset		= 0x8e,
-		.num_gpios	= 8,
-		.gpio_out_base	= HTCPLD_BASE(1, 0),
-		.gpio_in_base	= HTCPLD_BASE(5, 0),
-	},
-	[2] = {
-		.addr		= 0x05,
-		.reset		= 0x80,
-		.num_gpios	= 8,
-		.gpio_out_base	= HTCPLD_BASE(2, 0),
-		.gpio_in_base	= HTCPLD_BASE(6, 0),
-		.irq_base	= HTCPLD_IRQ(0, 0),
-		.num_irqs	= 8,
-	},
-	[3] = {
-		.addr		= 0x06,
-		.reset		= 0x40,
-		.num_gpios	= 8,
-		.gpio_out_base	= HTCPLD_BASE(3, 0),
-		.gpio_in_base	= HTCPLD_BASE(7, 0),
-		.irq_base	= HTCPLD_IRQ(1, 0),
-		.num_irqs	= 8,
-	},
-};
-
-static struct htcpld_core_platform_data htcpld_pfdata = {
-	.i2c_adapter_id	   = 1,
-
-	.chip		   = htcpld_chips,
-	.num_chip	   = ARRAY_SIZE(htcpld_chips),
-};
-
-static struct platform_device htcpld_device = {
-	.name		= "i2c-htcpld",
-	.id		= -1,
-	.resource	= htcpld_resources,
-	.num_resources	= ARRAY_SIZE(htcpld_resources),
-	.dev	= {
-		.platform_data	= &htcpld_pfdata,
-	},
-};
-
-/* USB Device */
-static struct omap_usb_config htcherald_usb_config __initdata = {
-	.otg = 0,
-	.register_host = 0,
-	.register_dev  = 1,
-	.hmc_mode = 4,
-	.pins[0] = 2,
-};
-
-/* LCD Device resources */
-static const struct omap_lcd_config htcherald_lcd_config __initconst = {
-	.ctrl_name	= "internal",
-};
-
-static struct platform_device lcd_device = {
-	.name           = "lcd_htcherald",
-	.id             = -1,
-};
-
-/* MMC Card */
-#if IS_ENABLED(CONFIG_MMC_OMAP)
-static struct omap_mmc_platform_data htc_mmc1_data = {
-	.nr_slots                       = 1,
-	.switch_slot                    = NULL,
-	.slots[0]       = {
-		.ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
-		.name                   = "mmcblk",
-		.nomux                  = 1,
-		.wires                  = 4,
-		.switch_pin             = -1,
-	},
-};
-
-static struct omap_mmc_platform_data *htc_mmc_data[1];
-#endif
-
-
-/* Platform devices for the Herald */
-static struct platform_device *devices[] __initdata = {
-	&kp_device,
-	&lcd_device,
-	&htcpld_device,
-	&gpio_leds_device,
-	&herald_gpiokeys_device,
-};
-
-/*
- * Touchscreen
- */
-static const struct ads7846_platform_data htcherald_ts_platform_data = {
-	.model			= 7846,
-	.keep_vref_on		= 1,
-	.x_plate_ohms		= 496,
-	.gpio_pendown		= HTCHERALD_GPIO_TS,
-	.pressure_max		= 10000,
-	.pressure_min		= 5000,
-	.x_min			= 528,
-	.x_max			= 3760,
-	.y_min			= 624,
-	.y_max			= 3760,
-};
-
-static struct spi_board_info __initdata htcherald_spi_board_info[] = {
-	{
-		.modalias		= "ads7846",
-		.platform_data		= &htcherald_ts_platform_data,
-		.max_speed_hz		= 2500000,
-		.bus_num		= 2,
-		.chip_select		= 1,
-	}
-};
-
-/*
- * Init functions from here on
- */
-
-static void __init htcherald_lcd_init(void)
-{
-	u32 reg;
-	unsigned int tries = 200;
-
-	/* disable controller if active */
-	reg = omap_readl(OMAP_LCDC_CONTROL);
-	if (reg & OMAP_LCDC_CTRL_LCD_EN) {
-		reg &= ~OMAP_LCDC_CTRL_LCD_EN;
-		omap_writel(reg, OMAP_LCDC_CONTROL);
-
-		/* wait for end of frame */
-		while (!(omap_readl(OMAP_LCDC_STATUS) & OMAP_LCDC_STAT_DONE)) {
-			tries--;
-			if (!tries)
-				break;
-		}
-		if (!tries)
-			pr_err("Timeout waiting for end of frame -- LCD may not be available\n");
-
-		/* turn off DMA */
-		reg = omap_readw(OMAP_DMA_LCD_CCR);
-		reg &= ~(1 << 7);
-		omap_writew(reg, OMAP_DMA_LCD_CCR);
-
-		reg = omap_readw(OMAP_DMA_LCD_CTRL);
-		reg &= ~(1 << 8);
-		omap_writew(reg, OMAP_DMA_LCD_CTRL);
-	}
-}
-
-static void __init htcherald_map_io(void)
-{
-	omap7xx_map_io();
-
-	/*
-	 * The LCD panel must be disabled and DMA turned off here, as doing
-	 * it later causes the LCD never to reinitialize.
-	 */
-	htcherald_lcd_init();
-
-	printk(KERN_INFO "htcherald_map_io done.\n");
-}
-
-static void __init htcherald_disable_watchdog(void)
-{
-	/* Disable watchdog if running */
-	if (omap_readl(OMAP_WDT_TIMER_MODE) & 0x8000) {
-		/*
-		 * disable a potentially running watchdog timer before
-		 * it kills us.
-		 */
-		printk(KERN_WARNING "OMAP850 Watchdog seems to be activated, disabling it for now.\n");
-		omap_writel(0xF5, OMAP_WDT_TIMER_MODE);
-		omap_writel(0xA0, OMAP_WDT_TIMER_MODE);
-	}
-}
-
-#define HTCHERALD_GPIO_USB_EN1 33
-#define HTCHERALD_GPIO_USB_EN2 73
-#define HTCHERALD_GPIO_USB_DM  35
-#define HTCHERALD_GPIO_USB_DP  36
-
-static void __init htcherald_usb_enable(void)
-{
-	unsigned int tries = 20;
-	unsigned int value = 0;
-
-	/* Request the GPIOs we need to control here */
-	if (gpio_request(HTCHERALD_GPIO_USB_EN1, "herald_usb") < 0)
-		goto err1;
-
-	if (gpio_request(HTCHERALD_GPIO_USB_EN2, "herald_usb") < 0)
-		goto err2;
-
-	if (gpio_request(HTCHERALD_GPIO_USB_DM, "herald_usb") < 0)
-		goto err3;
-
-	if (gpio_request(HTCHERALD_GPIO_USB_DP, "herald_usb") < 0)
-		goto err4;
-
-	/* force USB_EN GPIO to 0 */
-	do {
-		/* output low */
-		gpio_direction_output(HTCHERALD_GPIO_USB_EN1, 0);
-	} while ((value = gpio_get_value(HTCHERALD_GPIO_USB_EN1)) == 1 &&
-			--tries);
-
-	if (value == 1)
-		printk(KERN_WARNING "Unable to reset USB, trying to continue\n");
-
-	gpio_direction_output(HTCHERALD_GPIO_USB_EN2, 0); /* output low */
-	gpio_direction_input(HTCHERALD_GPIO_USB_DM); /* input */
-	gpio_direction_input(HTCHERALD_GPIO_USB_DP); /* input */
-
-	goto done;
-
-err4:
-	gpio_free(HTCHERALD_GPIO_USB_DM);
-err3:
-	gpio_free(HTCHERALD_GPIO_USB_EN2);
-err2:
-	gpio_free(HTCHERALD_GPIO_USB_EN1);
-err1:
-	printk(KERN_ERR "Unabled to request GPIO for USB\n");
-done:
-	printk(KERN_INFO "USB setup complete.\n");
-}
-
-static void __init htcherald_init(void)
-{
-	printk(KERN_INFO "HTC Herald init.\n");
-
-	/* Do board initialization before we register all the devices */
-	htcpld_resources[0].start = gpio_to_irq(HTCHERALD_GIRQ_BTNS);
-	htcpld_resources[0].end = gpio_to_irq(HTCHERALD_GIRQ_BTNS);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	htcherald_disable_watchdog();
-
-	htcherald_usb_enable();
-	omap1_usb_init(&htcherald_usb_config);
-
-	htcherald_spi_board_info[0].irq = gpio_to_irq(HTCHERALD_GPIO_TS);
-	spi_register_board_info(htcherald_spi_board_info,
-		ARRAY_SIZE(htcherald_spi_board_info));
-
-	omap_register_i2c_bus(1, 100, NULL, 0);
-
-#if IS_ENABLED(CONFIG_MMC_OMAP)
-	htc_mmc_data[0] = &htc_mmc1_data;
-	omap1_init_mmc(htc_mmc_data, 1);
-#endif
-
-	omapfb_set_lcd_config(&htcherald_lcd_config);
-}
-
-MACHINE_START(HERALD, "HTC Herald")
-	/* Maintainer: Cory Maccarrone <darkstar6262@gmail.com> */
-	/* Maintainer: wing-linux.sourceforge.net */
-	.atag_offset    = 0x100,
-	.map_io         = htcherald_map_io,
-	.init_early     = omap1_init_early,
-	.init_irq       = omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
-	.init_machine   = htcherald_init,
-	.init_late	= omap1_init_late,
-	.init_time	= omap1_timer_init,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
deleted file mode 100644
index 6deb4ca079e9..000000000000
--- a/arch/arm/mach-omap1/board-innovator.c
+++ /dev/null
@@ -1,481 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-innovator.c
- *
- * Board specific inits for OMAP-1510 and OMAP-1610 Innovator
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Copyright (C) 2002 MontaVista Software, Inc.
- *
- * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
- * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/smc91x.h>
-#include <linux/omapfb.h>
-#include <linux/platform_data/keypad-omap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "tc.h"
-#include "mux.h"
-#include "flash.h"
-#include "hardware.h"
-#include "usb.h"
-#include "iomap.h"
-#include "common.h"
-#include "mmc.h"
-
-/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
-#define INNOVATOR1610_ETHR_START	0x04000300
-
-static const unsigned int innovator_keymap[] = {
-	KEY(0, 0, KEY_F1),
-	KEY(3, 0, KEY_DOWN),
-	KEY(1, 1, KEY_F2),
-	KEY(2, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_F3),
-	KEY(1, 2, KEY_F4),
-	KEY(2, 2, KEY_UP),
-	KEY(2, 3, KEY_ENTER),
-	KEY(3, 3, KEY_LEFT),
-};
-
-static struct mtd_partition innovator_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-	      .name		= "bootloader",
-	      .offset		= 0,
-	      .size		= SZ_128K,
-	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-	      .name		= "params",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_128K,
-	      .mask_flags	= 0,
-	},
-	/* kernel */
-	{
-	      .name		= "kernel",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_2M,
-	      .mask_flags	= 0
-	},
-	/* rest of flash1 is a file system */
-	{
-	      .name		= "rootfs",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_16M - SZ_2M - 2 * SZ_128K,
-	      .mask_flags	= 0
-	},
-	/* file system */
-	{
-	      .name		= "filesystem",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= MTDPART_SIZ_FULL,
-	      .mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data innovator_flash_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-	.parts		= innovator_partitions,
-	.nr_parts	= ARRAY_SIZE(innovator_partitions),
-};
-
-static struct resource innovator_flash_resource = {
-	.start		= OMAP_CS0_PHYS,
-	.end		= OMAP_CS0_PHYS + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device innovator_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &innovator_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &innovator_flash_resource,
-};
-
-static struct resource innovator_kp_resources[] = {
-	[0] = {
-		.start	= INT_KEYBOARD,
-		.end	= INT_KEYBOARD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static const struct matrix_keymap_data innovator_keymap_data = {
-	.keymap		= innovator_keymap,
-	.keymap_size	= ARRAY_SIZE(innovator_keymap),
-};
-
-static struct omap_kp_platform_data innovator_kp_data = {
-	.rows		= 8,
-	.cols		= 8,
-	.keymap_data	= &innovator_keymap_data,
-	.delay		= 4,
-};
-
-static struct platform_device innovator_kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &innovator_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(innovator_kp_resources),
-	.resource	= innovator_kp_resources,
-};
-
-static struct smc91x_platdata innovator_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-#ifdef CONFIG_ARCH_OMAP15XX
-
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-
-
-/* Only FPGA needs to be mapped here. All others are done with ioremap */
-static struct map_desc innovator1510_io_desc[] __initdata = {
-	{
-		.virtual	= OMAP1510_FPGA_BASE,
-		.pfn		= __phys_to_pfn(OMAP1510_FPGA_START),
-		.length		= OMAP1510_FPGA_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static struct resource innovator1510_smc91x_resources[] = {
-	[0] = {
-		.start	= OMAP1510_FPGA_ETHR_START,	/* Physical */
-		.end	= OMAP1510_FPGA_ETHR_START + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= OMAP1510_INT_ETHER,
-		.end	= OMAP1510_INT_ETHER,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct platform_device innovator1510_smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &innovator_smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(innovator1510_smc91x_resources),
-	.resource	= innovator1510_smc91x_resources,
-};
-
-static struct platform_device innovator1510_lcd_device = {
-	.name		= "lcd_inn1510",
-	.id		= -1,
-	.dev	= {
-		.platform_data = (void __force *)OMAP1510_FPGA_LCD_PANEL_CONTROL,
-	}
-};
-
-static struct platform_device innovator1510_spi_device = {
-	.name		= "spi_inn1510",
-	.id		= -1,
-};
-
-static struct platform_device *innovator1510_devices[] __initdata = {
-	&innovator_flash_device,
-	&innovator1510_smc91x_device,
-	&innovator_kp_device,
-	&innovator1510_lcd_device,
-	&innovator1510_spi_device,
-};
-
-static int innovator_get_pendown_state(void)
-{
-	return !(__raw_readb(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
-}
-
-static const struct ads7846_platform_data innovator1510_ts_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,	/* internal, no capacitor */
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.get_pendown_state	= innovator_get_pendown_state,
-};
-
-static struct spi_board_info __initdata innovator1510_boardinfo[] = { {
-	/* FPGA (bus "10") CS0 has an ads7846e */
-	.modalias		= "ads7846",
-	.platform_data		= &innovator1510_ts_info,
-	.irq			= OMAP1510_INT_FPGA_TS,
-	.max_speed_hz		= 120000 /* max sample rate at 3V */
-					* 26 /* command + data + overhead */,
-	.bus_num		= 10,
-	.chip_select		= 0,
-} };
-
-#endif /* CONFIG_ARCH_OMAP15XX */
-
-#ifdef CONFIG_ARCH_OMAP16XX
-
-static struct resource innovator1610_smc91x_resources[] = {
-	[0] = {
-		.start	= INNOVATOR1610_ETHR_START,		/* Physical */
-		.end	= INNOVATOR1610_ETHR_START + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct platform_device innovator1610_smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &innovator_smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(innovator1610_smc91x_resources),
-	.resource	= innovator1610_smc91x_resources,
-};
-
-static struct platform_device innovator1610_lcd_device = {
-	.name		= "inn1610_lcd",
-	.id		= -1,
-};
-
-static struct platform_device *innovator1610_devices[] __initdata = {
-	&innovator_flash_device,
-	&innovator1610_smc91x_device,
-	&innovator_kp_device,
-	&innovator1610_lcd_device,
-};
-
-#endif /* CONFIG_ARCH_OMAP16XX */
-
-static void __init innovator_init_smc91x(void)
-{
-	if (cpu_is_omap1510()) {
-		__raw_writeb(__raw_readb(OMAP1510_FPGA_RST) & ~1,
-			   OMAP1510_FPGA_RST);
-		udelay(750);
-	} else {
-		if (gpio_request(0, "SMC91x irq") < 0) {
-			printk("Error requesting gpio 0 for smc91x irq\n");
-			return;
-		}
-	}
-}
-
-#ifdef CONFIG_ARCH_OMAP15XX
-/*
- * Board specific gang-switched transceiver power on/off.
- */
-static int innovator_omap_ohci_transceiver_power(int on)
-{
-	if (on)
-		__raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
-				| ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
-			       INNOVATOR_FPGA_CAM_USB_CONTROL);
-	else
-		__raw_writeb(__raw_readb(INNOVATOR_FPGA_CAM_USB_CONTROL)
-				& ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)),
-			       INNOVATOR_FPGA_CAM_USB_CONTROL);
-
-	return 0;
-}
-
-static struct omap_usb_config innovator1510_usb_config __initdata = {
-	/* for bundled non-standard host and peripheral cables */
-	.hmc_mode	= 4,
-
-	.register_host	= 1,
-	.pins[1]	= 6,
-	.pins[2]	= 6,		/* Conflicts with UART2 */
-
-	.register_dev	= 1,
-	.pins[0]	= 2,
-
-	.transceiver_power = innovator_omap_ohci_transceiver_power,
-};
-
-static const struct omap_lcd_config innovator1510_lcd_config __initconst = {
-	.ctrl_name	= "internal",
-};
-#endif
-
-#ifdef CONFIG_ARCH_OMAP16XX
-static struct omap_usb_config h2_usb_config __initdata = {
-	/* usb1 has a Mini-AB port and external isp1301 transceiver */
-	.otg		= 2,
-
-#if IS_ENABLED(CONFIG_USB_OMAP)
-	.hmc_mode	= 19,	/* 0:host(off) 1:dev|otg 2:disabled */
-	/* .hmc_mode	= 21,*/	/* 0:host(off) 1:dev(loopback) 2:host(loopback) */
-#elif	IS_ENABLED(CONFIG_USB_OHCI_HCD)
-	/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
-	.hmc_mode	= 20,	/* 1:dev|otg(off) 1:host 2:disabled */
-#endif
-
-	.pins[1]	= 3,
-};
-
-static const struct omap_lcd_config innovator1610_lcd_config __initconst = {
-	.ctrl_name	= "internal",
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MMC_OMAP)
-
-static int mmc_set_power(struct device *dev, int slot, int power_on,
-				int vdd)
-{
-	if (power_on)
-		__raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) | (1 << 3),
-				OMAP1510_FPGA_POWER);
-	else
-		__raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) & ~(1 << 3),
-				OMAP1510_FPGA_POWER);
-
-	return 0;
-}
-
-/*
- * Innovator could use the following functions tested:
- * - mmc_get_wp that uses OMAP_MPUIO(3)
- * - mmc_get_cover_state that uses FPGA F4 UIO43
- */
-static struct omap_mmc_platform_data mmc1_data = {
-	.nr_slots                       = 1,
-	.slots[0]       = {
-		.set_power		= mmc_set_power,
-		.wires			= 4,
-		.name                   = "mmcblk",
-	},
-};
-
-static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC];
-
-static void __init innovator_mmc_init(void)
-{
-	mmc_data[0] = &mmc1_data;
-	omap1_init_mmc(mmc_data, OMAP15XX_NR_MMC);
-}
-
-#else
-static inline void innovator_mmc_init(void)
-{
-}
-#endif
-
-static void __init innovator_init(void)
-{
-	if (cpu_is_omap1510())
-		omap1510_fpga_init_irq();
-	innovator_init_smc91x();
-
-#ifdef CONFIG_ARCH_OMAP15XX
-	if (cpu_is_omap1510()) {
-		unsigned char reg;
-
-		/* mux pins for uarts */
-		omap_cfg_reg(UART1_TX);
-		omap_cfg_reg(UART1_RTS);
-		omap_cfg_reg(UART2_TX);
-		omap_cfg_reg(UART2_RTS);
-		omap_cfg_reg(UART3_TX);
-		omap_cfg_reg(UART3_RX);
-
-		reg = __raw_readb(OMAP1510_FPGA_POWER);
-		reg |= OMAP1510_FPGA_PCR_COM1_EN;
-		__raw_writeb(reg, OMAP1510_FPGA_POWER);
-		udelay(10);
-
-		reg = __raw_readb(OMAP1510_FPGA_POWER);
-		reg |= OMAP1510_FPGA_PCR_COM2_EN;
-		__raw_writeb(reg, OMAP1510_FPGA_POWER);
-		udelay(10);
-
-		platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
-		spi_register_board_info(innovator1510_boardinfo,
-				ARRAY_SIZE(innovator1510_boardinfo));
-	}
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-	if (!cpu_is_omap1510()) {
-		innovator1610_smc91x_resources[1].start = gpio_to_irq(0);
-		innovator1610_smc91x_resources[1].end = gpio_to_irq(0);
-		platform_add_devices(innovator1610_devices, ARRAY_SIZE(innovator1610_devices));
-	}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP15XX
-	if (cpu_is_omap1510()) {
-		omap1_usb_init(&innovator1510_usb_config);
-		omapfb_set_lcd_config(&innovator1510_lcd_config);
-	}
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-	if (cpu_is_omap1610()) {
-		omap1_usb_init(&h2_usb_config);
-		omapfb_set_lcd_config(&innovator1610_lcd_config);
-	}
-#endif
-	omap_serial_init();
-	omap_register_i2c_bus(1, 100, NULL, 0);
-	innovator_mmc_init();
-}
-
-/*
- * REVISIT: Assume 15xx for now, we don't want to do revision check
- * until later on. The right way to fix this is to set up a different
- * machine_id for 16xx Innovator, or use device tree.
- */
-static void __init innovator_map_io(void)
-{
-#ifdef CONFIG_ARCH_OMAP15XX
-	omap15xx_map_io();
-
-	iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
-	udelay(10);	/* Delay needed for FPGA */
-
-	/* Dump the Innovator FPGA rev early - useful info for support. */
-	pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n",
-			__raw_readb(OMAP1510_FPGA_REV_HIGH),
-			__raw_readb(OMAP1510_FPGA_REV_LOW),
-			__raw_readb(OMAP1510_FPGA_BOARD_REV));
-#endif
-}
-
-MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
-	/* Maintainer: MontaVista Software, Inc. */
-	.atag_offset	= 0x100,
-	.map_io		= innovator_map_io,
-	.init_early     = omap1_init_early,
-	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
-	.init_machine	= innovator_init,
-	.init_late	= omap1_init_late,
-	.init_time	= omap1_timer_init,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap1/board-nand.c b/arch/arm/mach-omap1/board-nand.c
deleted file mode 100644
index 479ab9be784d..000000000000
--- a/arch/arm/mach-omap1/board-nand.c
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-nand.c
- *
- * Common OMAP1 board NAND code
- *
- * Copyright (C) 2004, 2012 Texas Instruments, Inc.
- * Copyright (C) 2002 MontaVista Software, Inc.
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: RidgeRun, Inc.
- *         Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com
- */
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-
-#include "common.h"
-
-void omap1_nand_cmd_ctl(struct nand_chip *this, int cmd, unsigned int ctrl)
-{
-	unsigned long mask;
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	mask = (ctrl & NAND_CLE) ? 0x02 : 0;
-	if (ctrl & NAND_ALE)
-		mask |= 0x04;
-
-	writeb(cmd, this->legacy.IO_ADDR_W + mask);
-}
-
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 8e0e58495023..a501a473ffd6 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -288,7 +288,7 @@ static void __init omap_nokia770_init(void)
 
 MACHINE_START(NOKIA770, "Nokia 770")
 	.atag_offset	= 0x100,
-	.map_io		= omap16xx_map_io,
+	.map_io		= omap1_map_io,
 	.init_early     = omap1_init_early,
 	.init_irq	= omap1_init_irq,
 	.handle_irq	= omap1_handle_irq,
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 76684b7a4e87..df758c1f9237 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -339,267 +339,6 @@ static struct omap_usb_config osk_usb_config __initdata = {
 	.pins[0]	= 2,
 };
 
-#ifdef	CONFIG_OMAP_OSK_MISTRAL
-static const struct omap_lcd_config osk_lcd_config __initconst = {
-	.ctrl_name	= "internal",
-};
-#endif
-
-#ifdef	CONFIG_OMAP_OSK_MISTRAL
-
-#include <linux/input.h>
-#include <linux/property.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-
-#include <linux/platform_data/keypad-omap.h>
-
-static const struct property_entry mistral_at24_properties[] = {
-	PROPERTY_ENTRY_U32("pagesize", 16),
-	{ }
-};
-
-static const struct software_node mistral_at24_node = {
-	.properties = mistral_at24_properties,
-};
-
-static struct i2c_board_info __initdata mistral_i2c_board_info[] = {
-	{
-		/* NOTE:  powered from LCD supply */
-		I2C_BOARD_INFO("24c04", 0x50),
-		.swnode = &mistral_at24_node,
-	},
-	/* TODO when driver support is ready:
-	 *  - optionally ov9640 camera sensor at 0x30
-	 */
-};
-
-static const unsigned int osk_keymap[] = {
-	/* KEY(col, row, code) */
-	KEY(0, 0, KEY_F1),		/* SW4 */
-	KEY(3, 0, KEY_UP),		/* (sw2/up) */
-	KEY(1, 1, KEY_LEFTCTRL),	/* SW5 */
-	KEY(2, 1, KEY_LEFT),		/* (sw2/left) */
-	KEY(0, 2, KEY_SPACE),		/* SW3 */
-	KEY(1, 2, KEY_ESC),		/* SW6 */
-	KEY(2, 2, KEY_DOWN),		/* (sw2/down) */
-	KEY(2, 3, KEY_ENTER),		/* (sw2/select) */
-	KEY(3, 3, KEY_RIGHT),		/* (sw2/right) */
-};
-
-static const struct matrix_keymap_data osk_keymap_data = {
-	.keymap		= osk_keymap,
-	.keymap_size	= ARRAY_SIZE(osk_keymap),
-};
-
-static struct omap_kp_platform_data osk_kp_data = {
-	.rows		= 8,
-	.cols		= 8,
-	.keymap_data	= &osk_keymap_data,
-	.delay		= 9,
-};
-
-static struct resource osk5912_kp_resources[] = {
-	[0] = {
-		.start	= INT_KEYBOARD,
-		.end	= INT_KEYBOARD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device osk5912_kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &osk_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(osk5912_kp_resources),
-	.resource	= osk5912_kp_resources,
-};
-
-static struct omap_backlight_config mistral_bl_data = {
-	.default_intensity	= 0xa0,
-};
-
-static struct platform_device mistral_bl_device = {
-	.name		= "omap-bl",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &mistral_bl_data,
-	},
-};
-
-static struct platform_device osk5912_lcd_device = {
-	.name		= "lcd_osk",
-	.id		= -1,
-};
-
-static const struct gpio_led mistral_gpio_led_pins[] = {
-	{
-		.name		= "mistral:red",
-		.default_trigger = "heartbeat",
-		.gpio		= 3,
-	},
-	{
-		.name		= "mistral:green",
-		.default_trigger = "cpu0",
-		.gpio		= OMAP_MPUIO(4),
-	},
-};
-
-static struct gpio_led_platform_data mistral_gpio_led_data = {
-	.leds		= mistral_gpio_led_pins,
-	.num_leds	= ARRAY_SIZE(mistral_gpio_led_pins),
-};
-
-static struct platform_device mistral_gpio_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &mistral_gpio_led_data,
-	},
-};
-
-static struct platform_device *mistral_devices[] __initdata = {
-	&osk5912_kp_device,
-	&mistral_bl_device,
-	&osk5912_lcd_device,
-	&mistral_gpio_leds,
-};
-
-static int mistral_get_pendown_state(void)
-{
-	return !gpio_get_value(4);
-}
-
-static const struct ads7846_platform_data mistral_ts_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,	/* internal, no capacitor */
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.get_pendown_state	= mistral_get_pendown_state,
-};
-
-static struct spi_board_info __initdata mistral_boardinfo[] = { {
-	/* MicroWire (bus 2) CS0 has an ads7846e */
-	.modalias		= "ads7846",
-	.platform_data		= &mistral_ts_info,
-	.max_speed_hz		= 120000 /* max sample rate at 3V */
-					* 26 /* command + data + overhead */,
-	.bus_num		= 2,
-	.chip_select		= 0,
-} };
-
-static irqreturn_t
-osk_mistral_wake_interrupt(int irq, void *ignored)
-{
-	return IRQ_HANDLED;
-}
-
-static void __init osk_mistral_init(void)
-{
-	/* NOTE:  we could actually tell if there's a Mistral board
-	 * attached, e.g. by trying to read something from the ads7846.
-	 * But this arch_init() code is too early for that, since we
-	 * can't talk to the ads or even the i2c eeprom.
-	 */
-
-	/* parallel camera interface */
-	omap_cfg_reg(J15_1610_CAM_LCLK);
-	omap_cfg_reg(J18_1610_CAM_D7);
-	omap_cfg_reg(J19_1610_CAM_D6);
-	omap_cfg_reg(J14_1610_CAM_D5);
-	omap_cfg_reg(K18_1610_CAM_D4);
-	omap_cfg_reg(K19_1610_CAM_D3);
-	omap_cfg_reg(K15_1610_CAM_D2);
-	omap_cfg_reg(K14_1610_CAM_D1);
-	omap_cfg_reg(L19_1610_CAM_D0);
-	omap_cfg_reg(L18_1610_CAM_VS);
-	omap_cfg_reg(L15_1610_CAM_HS);
-	omap_cfg_reg(M19_1610_CAM_RSTZ);
-	omap_cfg_reg(Y15_1610_CAM_OUTCLK);
-
-	/* serial camera interface */
-	omap_cfg_reg(H19_1610_CAM_EXCLK);
-	omap_cfg_reg(W13_1610_CCP_CLKM);
-	omap_cfg_reg(Y12_1610_CCP_CLKP);
-	/* CCP_DATAM CONFLICTS WITH UART1.TX (and serial console) */
-	/* omap_cfg_reg(Y14_1610_CCP_DATAM); */
-	omap_cfg_reg(W14_1610_CCP_DATAP);
-
-	/* CAM_PWDN */
-	if (gpio_request(11, "cam_pwdn") == 0) {
-		omap_cfg_reg(N20_1610_GPIO11);
-		gpio_direction_output(11, 0);
-	} else
-		pr_debug("OSK+Mistral: CAM_PWDN is awol\n");
-
-
-	/* omap_cfg_reg(P19_1610_GPIO6); */	/* BUSY */
-	gpio_request(6, "ts_busy");
-	gpio_direction_input(6);
-
-	omap_cfg_reg(P20_1610_GPIO4);	/* PENIRQ */
-	gpio_request(4, "ts_int");
-	gpio_direction_input(4);
-	irq_set_irq_type(gpio_to_irq(4), IRQ_TYPE_EDGE_FALLING);
-
-	mistral_boardinfo[0].irq = gpio_to_irq(4);
-	spi_register_board_info(mistral_boardinfo,
-			ARRAY_SIZE(mistral_boardinfo));
-
-	/* the sideways button (SW1) is for use as a "wakeup" button
-	 *
-	 * NOTE:  The Mistral board has the wakeup button (SW1) wired
-	 * to the LCD 3.3V rail, which is powered down during suspend.
-	 * To allow this button to wake up the omap, work around this
-	 * HW bug by rewiring SW1 to use the main 3.3V rail.
-	 */
-	omap_cfg_reg(N15_1610_MPUIO2);
-	if (gpio_request(OMAP_MPUIO(2), "wakeup") == 0) {
-		int ret = 0;
-		int irq = gpio_to_irq(OMAP_MPUIO(2));
-
-		gpio_direction_input(OMAP_MPUIO(2));
-		irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
-		/* share the IRQ in case someone wants to use the
-		 * button for more than wakeup from system sleep.
-		 */
-		ret = request_irq(irq,
-				&osk_mistral_wake_interrupt,
-				IRQF_SHARED, "mistral_wakeup",
-				&osk_mistral_wake_interrupt);
-		if (ret != 0) {
-			gpio_free(OMAP_MPUIO(2));
-			printk(KERN_ERR "OSK+Mistral: no wakeup irq, %d?\n",
-				ret);
-		} else
-			enable_irq_wake(irq);
-	} else
-		printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n");
-
-	/* LCD:  backlight, and power; power controls other devices on the
-	 * board, like the touchscreen, EEPROM, and wakeup (!) switch.
-	 */
-	omap_cfg_reg(PWL);
-	if (gpio_request(2, "lcd_pwr") == 0)
-		gpio_direction_output(2, 1);
-
-	/*
-	 * GPIO based LEDs
-	 */
-	omap_cfg_reg(P18_1610_GPIO3);
-	omap_cfg_reg(MPUIO4);
-
-	i2c_register_board_info(1, mistral_i2c_board_info,
-			ARRAY_SIZE(mistral_i2c_board_info));
-
-	platform_add_devices(mistral_devices, ARRAY_SIZE(mistral_devices));
-}
-#else
-static void __init osk_mistral_init(void) { }
-#endif
-
 #define EMIFS_CS3_VAL	(0x88013141)
 
 static void __init osk_init(void)
@@ -642,18 +381,12 @@ static void __init osk_init(void)
 	osk_i2c_board_info[0].irq = gpio_to_irq(OMAP_MPUIO(1));
 	omap_register_i2c_bus(1, 400, osk_i2c_board_info,
 			      ARRAY_SIZE(osk_i2c_board_info));
-	osk_mistral_init();
-
-#ifdef	CONFIG_OMAP_OSK_MISTRAL
-	omapfb_set_lcd_config(&osk_lcd_config);
-#endif
-
 }
 
 MACHINE_START(OMAP_OSK, "TI-OSK")
 	/* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */
 	.atag_offset	= 0x100,
-	.map_io		= omap16xx_map_io,
+	.map_io		= omap1_map_io,
 	.init_early	= omap1_init_early,
 	.init_irq	= omap1_init_irq,
 	.handle_irq	= omap1_handle_irq,
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 72e1979c7a8b..f79c497f04d5 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -256,7 +256,7 @@ static void __init omap_palmte_init(void)
 
 MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
 	.atag_offset	= 0x100,
-	.map_io		= omap15xx_map_io,
+	.map_io		= omap1_map_io,
 	.init_early     = omap1_init_early,
 	.init_irq	= omap1_init_irq,
 	.handle_irq	= omap1_handle_irq,
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
deleted file mode 100644
index 537f0e6a2ff7..000000000000
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ /dev/null
@@ -1,285 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-palmtt.c
- *
- * Modified from board-palmtt2.c
- *
- * Modified and amended for Palm Tungsten|T
- * by Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/notifier.h>
-#include <linux/clk.h>
-#include <linux/input.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/leds.h>
-#include <linux/omapfb.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/omap-dma.h>
-#include <linux/platform_data/omap1_bl.h>
-#include <linux/platform_data/leds-omap.h>
-#include <linux/platform_data/keypad-omap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "tc.h"
-#include "flash.h"
-#include "mux.h"
-#include "hardware.h"
-#include "usb.h"
-#include "common.h"
-
-#define PALMTT_USBDETECT_GPIO	0
-#define PALMTT_CABLE_GPIO	1
-#define PALMTT_LED_GPIO		3
-#define PALMTT_PENIRQ_GPIO	6
-#define PALMTT_MMC_WP_GPIO	8
-#define PALMTT_HDQ_GPIO		11
-
-static const unsigned int palmtt_keymap[] = {
-	KEY(0, 0, KEY_ESC),
-	KEY(1, 0, KEY_SPACE),
-	KEY(2, 0, KEY_LEFTCTRL),
-	KEY(3, 0, KEY_TAB),
-	KEY(4, 0, KEY_ENTER),
-	KEY(0, 1, KEY_LEFT),
-	KEY(1, 1, KEY_DOWN),
-	KEY(2, 1, KEY_UP),
-	KEY(3, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_SLEEP),
-	KEY(4, 2, KEY_Y),
-};
-
-static struct mtd_partition palmtt_partitions[] = {
-	{
-		.name		= "write8k",
-		.offset		= 0,
-		.size		= SZ_8K,
-		.mask_flags	= 0,
-	},
-	{
-		.name		= "PalmOS-BootLoader(ro)",
-		.offset		= SZ_8K,
-		.size		= 7 * SZ_8K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "u-boot",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 8 * SZ_8K,
-		.mask_flags	= 0,
-	},
-	{
-		.name		= "PalmOS-FS(ro)",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 7 * SZ_1M + 4 * SZ_64K - 16 * SZ_8K,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	{
-		.name		= "u-boot(rez)",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_128K,
-		.mask_flags	= 0
-	},
-	{
-		.name		= "empty",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data palmtt_flash_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-	.parts		= palmtt_partitions,
-	.nr_parts	= ARRAY_SIZE(palmtt_partitions),
-};
-
-static struct resource palmtt_flash_resource = {
-	.start		= OMAP_CS0_PHYS,
-	.end		= OMAP_CS0_PHYS + SZ_8M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device palmtt_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &palmtt_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &palmtt_flash_resource,
-};
-
-static struct resource palmtt_kp_resources[] = {
-	[0] = {
-		.start	= INT_KEYBOARD,
-		.end	= INT_KEYBOARD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static const struct matrix_keymap_data palmtt_keymap_data = {
-	.keymap		= palmtt_keymap,
-	.keymap_size	= ARRAY_SIZE(palmtt_keymap),
-};
-
-static struct omap_kp_platform_data palmtt_kp_data = {
-	.rows	= 6,
-	.cols	= 3,
-	.keymap_data = &palmtt_keymap_data,
-};
-
-static struct platform_device palmtt_kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &palmtt_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(palmtt_kp_resources),
-	.resource	= palmtt_kp_resources,
-};
-
-static struct platform_device palmtt_lcd_device = {
-	.name		= "lcd_palmtt",
-	.id		= -1,
-};
-
-static struct platform_device palmtt_spi_device = {
-	.name		= "spi_palmtt",
-	.id		= -1,
-};
-
-static struct omap_backlight_config palmtt_backlight_config = {
-	.default_intensity	= 0xa0,
-};
-
-static struct platform_device palmtt_backlight_device = {
-	.name		= "omap-bl",
-	.id		= -1,
-	.dev		= {
-		.platform_data= &palmtt_backlight_config,
-	},
-};
-
-static struct omap_led_config palmtt_led_config[] = {
-	{
-		.cdev	= {
-			.name	= "palmtt:led0",
-		},
-		.gpio	= PALMTT_LED_GPIO,
-	},
-};
-
-static struct omap_led_platform_data palmtt_led_data = {
-	.nr_leds	= ARRAY_SIZE(palmtt_led_config),
-	.leds		= palmtt_led_config,
-};
-
-static struct platform_device palmtt_led_device = {
-	.name	= "omap-led",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &palmtt_led_data,
-	},
-};
-
-static struct platform_device *palmtt_devices[] __initdata = {
-	&palmtt_flash_device,
-	&palmtt_kp_device,
-	&palmtt_lcd_device,
-	&palmtt_spi_device,
-	&palmtt_backlight_device,
-	&palmtt_led_device,
-};
-
-static int palmtt_get_pendown_state(void)
-{
-	return !gpio_get_value(6);
-}
-
-static const struct ads7846_platform_data palmtt_ts_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,	/* internal, no capacitor */
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.get_pendown_state	= palmtt_get_pendown_state,
-};
-
-static struct spi_board_info __initdata palmtt_boardinfo[] = {
-	{
-		/* MicroWire (bus 2) CS0 has an ads7846e */
-		.modalias	= "ads7846",
-		.platform_data	= &palmtt_ts_info,
-		.max_speed_hz	= 120000	/* max sample rate at 3V */
-					* 26	/* command + data + overhead */,
-		.bus_num	= 2,
-		.chip_select	= 0,
-	}
-};
-
-static struct omap_usb_config palmtt_usb_config __initdata = {
-	.register_dev	= 1,
-	.hmc_mode	= 0,
-	.pins[0]	= 2,
-};
-
-static const struct omap_lcd_config palmtt_lcd_config __initconst = {
-	.ctrl_name	= "internal",
-};
-
-static void __init omap_mpu_wdt_mode(int mode) {
-	if (mode)
-		omap_writew(0x8000, OMAP_WDT_TIMER_MODE);
-	else {
-		omap_writew(0x00f5, OMAP_WDT_TIMER_MODE);
-		omap_writew(0x00a0, OMAP_WDT_TIMER_MODE);
-	}
-}
-
-static void __init omap_palmtt_init(void)
-{
-	/* mux pins for uarts */
-	omap_cfg_reg(UART1_TX);
-	omap_cfg_reg(UART1_RTS);
-	omap_cfg_reg(UART2_TX);
-	omap_cfg_reg(UART2_RTS);
-	omap_cfg_reg(UART3_TX);
-	omap_cfg_reg(UART3_RX);
-
-	omap_mpu_wdt_mode(0);
-
-	platform_add_devices(palmtt_devices, ARRAY_SIZE(palmtt_devices));
-
-	palmtt_boardinfo[0].irq = gpio_to_irq(6);
-	spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo));
-	omap_serial_init();
-	omap1_usb_init(&palmtt_usb_config);
-	omap_register_i2c_bus(1, 100, NULL, 0);
-
-	omapfb_set_lcd_config(&palmtt_lcd_config);
-}
-
-MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
-	.atag_offset	= 0x100,
-	.map_io		= omap15xx_map_io,
-	.init_early     = omap1_init_early,
-	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
-	.init_machine	= omap_palmtt_init,
-	.init_late	= omap1_init_late,
-	.init_time	= omap1_timer_init,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
deleted file mode 100644
index 47f08ae5a2f3..000000000000
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ /dev/null
@@ -1,300 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-palmz71.c
- *
- * Modified from board-generic.c
- *
- * Support for the Palm Zire71 PDA.
- *
- * Original version : Laurent Gonzalez
- *
- * Modified for zire71 : Marek Vasut
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/notifier.h>
-#include <linux/clk.h>
-#include <linux/irq.h>
-#include <linux/input.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/omapfb.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/platform_data/omap1_bl.h>
-#include <linux/platform_data/keypad-omap.h>
-#include <linux/omap-dma.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "tc.h"
-#include "flash.h"
-#include "mux.h"
-#include "hardware.h"
-#include "usb.h"
-#include "common.h"
-
-#define PALMZ71_USBDETECT_GPIO	0
-#define PALMZ71_PENIRQ_GPIO	6
-#define PALMZ71_MMC_WP_GPIO	8
-#define PALMZ71_HDQ_GPIO 	11
-
-#define PALMZ71_HOTSYNC_GPIO	OMAP_MPUIO(1)
-#define PALMZ71_CABLE_GPIO	OMAP_MPUIO(2)
-#define PALMZ71_SLIDER_GPIO	OMAP_MPUIO(3)
-#define PALMZ71_MMC_IN_GPIO	OMAP_MPUIO(4)
-
-static const unsigned int palmz71_keymap[] = {
-	KEY(0, 0, KEY_F1),
-	KEY(1, 0, KEY_F2),
-	KEY(2, 0, KEY_F3),
-	KEY(3, 0, KEY_F4),
-	KEY(4, 0, KEY_POWER),
-	KEY(0, 1, KEY_LEFT),
-	KEY(1, 1, KEY_DOWN),
-	KEY(2, 1, KEY_UP),
-	KEY(3, 1, KEY_RIGHT),
-	KEY(4, 1, KEY_ENTER),
-	KEY(0, 2, KEY_CAMERA),
-};
-
-static const struct matrix_keymap_data palmz71_keymap_data = {
-	.keymap		= palmz71_keymap,
-	.keymap_size	= ARRAY_SIZE(palmz71_keymap),
-};
-
-static struct omap_kp_platform_data palmz71_kp_data = {
-	.rows	= 8,
-	.cols	= 8,
-	.keymap_data	= &palmz71_keymap_data,
-	.rep	= true,
-	.delay	= 80,
-};
-
-static struct resource palmz71_kp_resources[] = {
-	[0] = {
-		.start	= INT_KEYBOARD,
-		.end	= INT_KEYBOARD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device palmz71_kp_device = {
-	.name	= "omap-keypad",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmz71_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(palmz71_kp_resources),
-	.resource	= palmz71_kp_resources,
-};
-
-static struct mtd_partition palmz71_rom_partitions[] = {
-	/* PalmOS "Small ROM", contains the bootloader and the debugger */
-	{
-		.name		= "smallrom",
-		.offset		= 0,
-		.size		= 0xa000,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-	/* PalmOS "Big ROM", a filesystem with all the OS code and data */
-	{
-		.name	= "bigrom",
-		.offset	= SZ_128K,
-		/*
-		 * 0x5f0000 bytes big in the multi-language ("EFIGS") version,
-		 * 0x7b0000 bytes in the English-only ("enUS") version.
-		 */
-		.size		= 0x7b0000,
-		.mask_flags	= MTD_WRITEABLE,
-	},
-};
-
-static struct physmap_flash_data palmz71_rom_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-	.parts		= palmz71_rom_partitions,
-	.nr_parts	= ARRAY_SIZE(palmz71_rom_partitions),
-};
-
-static struct resource palmz71_rom_resource = {
-	.start	= OMAP_CS0_PHYS,
-	.end	= OMAP_CS0_PHYS + SZ_8M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device palmz71_rom_device = {
-	.name	= "physmap-flash",
-	.id	= -1,
-	.dev = {
-		.platform_data = &palmz71_rom_data,
-	},
-	.num_resources	= 1,
-	.resource	= &palmz71_rom_resource,
-};
-
-static struct platform_device palmz71_lcd_device = {
-	.name	= "lcd_palmz71",
-	.id	= -1,
-};
-
-static struct platform_device palmz71_spi_device = {
-	.name	= "spi_palmz71",
-	.id	= -1,
-};
-
-static struct omap_backlight_config palmz71_backlight_config = {
-	.default_intensity	= 0xa0,
-};
-
-static struct platform_device palmz71_backlight_device = {
-	.name	= "omap-bl",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmz71_backlight_config,
-	},
-};
-
-static struct platform_device *devices[] __initdata = {
-	&palmz71_rom_device,
-	&palmz71_kp_device,
-	&palmz71_lcd_device,
-	&palmz71_spi_device,
-	&palmz71_backlight_device,
-};
-
-static int
-palmz71_get_pendown_state(void)
-{
-	return !gpio_get_value(PALMZ71_PENIRQ_GPIO);
-}
-
-static const struct ads7846_platform_data palmz71_ts_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,	/* internal, no capacitor */
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.get_pendown_state	= palmz71_get_pendown_state,
-};
-
-static struct spi_board_info __initdata palmz71_boardinfo[] = { {
-	/* MicroWire (bus 2) CS0 has an ads7846e */
-	.modalias	= "ads7846",
-	.platform_data	= &palmz71_ts_info,
-	.max_speed_hz	= 120000	/* max sample rate at 3V */
-				* 26	/* command + data + overhead */,
-	.bus_num	= 2,
-	.chip_select	= 0,
-} };
-
-static struct omap_usb_config palmz71_usb_config __initdata = {
-	.register_dev	= 1,	/* Mini-B only receptacle */
-	.hmc_mode	= 0,
-	.pins[0]	= 2,
-};
-
-static const struct omap_lcd_config palmz71_lcd_config __initconst = {
-	.ctrl_name = "internal",
-};
-
-static irqreturn_t
-palmz71_powercable(int irq, void *dev_id)
-{
-	if (gpio_get_value(PALMZ71_USBDETECT_GPIO)) {
-		printk(KERN_INFO "PM: Power cable connected\n");
-		irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
-				 IRQ_TYPE_EDGE_FALLING);
-	} else {
-		printk(KERN_INFO "PM: Power cable disconnected\n");
-		irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
-				 IRQ_TYPE_EDGE_RISING);
-	}
-	return IRQ_HANDLED;
-}
-
-static void __init
-omap_mpu_wdt_mode(int mode)
-{
-	if (mode)
-		omap_writew(0x8000, OMAP_WDT_TIMER_MODE);
-	else {
-		omap_writew(0x00f5, OMAP_WDT_TIMER_MODE);
-		omap_writew(0x00a0, OMAP_WDT_TIMER_MODE);
-	}
-}
-
-static void __init
-palmz71_gpio_setup(int early)
-{
-	if (early) {
-		/* Only set GPIO1 so we have a working serial */
-		gpio_direction_output(1, 1);
-	} else {
-		/* Set MMC/SD host WP pin as input */
-		if (gpio_request(PALMZ71_MMC_WP_GPIO, "MMC WP") < 0) {
-			printk(KERN_ERR "Could not reserve WP GPIO!\n");
-			return;
-		}
-		gpio_direction_input(PALMZ71_MMC_WP_GPIO);
-
-		/* Monitor the Power-cable-connected signal */
-		if (gpio_request(PALMZ71_USBDETECT_GPIO, "USB detect") < 0) {
-			printk(KERN_ERR
-				"Could not reserve cable signal GPIO!\n");
-			return;
-		}
-		gpio_direction_input(PALMZ71_USBDETECT_GPIO);
-		if (request_irq(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
-				palmz71_powercable, 0, "palmz71-cable", NULL))
-			printk(KERN_ERR
-					"IRQ request for power cable failed!\n");
-		palmz71_powercable(gpio_to_irq(PALMZ71_USBDETECT_GPIO), NULL);
-	}
-}
-
-static void __init
-omap_palmz71_init(void)
-{
-	/* mux pins for uarts */
-	omap_cfg_reg(UART1_TX);
-	omap_cfg_reg(UART1_RTS);
-	omap_cfg_reg(UART2_TX);
-	omap_cfg_reg(UART2_RTS);
-	omap_cfg_reg(UART3_TX);
-	omap_cfg_reg(UART3_RX);
-
-	palmz71_gpio_setup(1);
-	omap_mpu_wdt_mode(0);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	palmz71_boardinfo[0].irq = gpio_to_irq(PALMZ71_PENIRQ_GPIO);
-	spi_register_board_info(palmz71_boardinfo,
-				ARRAY_SIZE(palmz71_boardinfo));
-	omap1_usb_init(&palmz71_usb_config);
-	omap_serial_init();
-	omap_register_i2c_bus(1, 100, NULL, 0);
-	palmz71_gpio_setup(0);
-
-	omapfb_set_lcd_config(&palmz71_lcd_config);
-}
-
-MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
-	.atag_offset	= 0x100,
-	.map_io		= omap15xx_map_io,
-	.init_early     = omap1_init_early,
-	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
-	.init_machine	= omap_palmz71_init,
-	.init_late	= omap1_init_late,
-	.init_time	= omap1_timer_init,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
deleted file mode 100644
index b041e6f6e9cf..000000000000
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ /dev/null
@@ -1,333 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/board-perseus2.c
- *
- * Modified from board-generic.c
- *
- * Original OMAP730 support by Jean Pihet <j-pihet@ti.com>
- * Updated for 2.6 by Kevin Hilman <kjh@hilman.org>
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/platnand.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/smc91x.h>
-#include <linux/omapfb.h>
-#include <linux/platform_data/keypad-omap.h>
-#include <linux/soc/ti/omap1-io.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "tc.h"
-#include "mux.h"
-#include "flash.h"
-#include "hardware.h"
-#include "iomap.h"
-#include "common.h"
-#include "fpga.h"
-
-static const unsigned int p2_keymap[] = {
-	KEY(0, 0, KEY_UP),
-	KEY(1, 0, KEY_RIGHT),
-	KEY(2, 0, KEY_LEFT),
-	KEY(3, 0, KEY_DOWN),
-	KEY(4, 0, KEY_ENTER),
-	KEY(0, 1, KEY_F10),
-	KEY(1, 1, KEY_SEND),
-	KEY(2, 1, KEY_END),
-	KEY(3, 1, KEY_VOLUMEDOWN),
-	KEY(4, 1, KEY_VOLUMEUP),
-	KEY(5, 1, KEY_RECORD),
-	KEY(0, 2, KEY_F9),
-	KEY(1, 2, KEY_3),
-	KEY(2, 2, KEY_6),
-	KEY(3, 2, KEY_9),
-	KEY(4, 2, KEY_KPDOT),
-	KEY(0, 3, KEY_BACK),
-	KEY(1, 3, KEY_2),
-	KEY(2, 3, KEY_5),
-	KEY(3, 3, KEY_8),
-	KEY(4, 3, KEY_0),
-	KEY(5, 3, KEY_KPSLASH),
-	KEY(0, 4, KEY_HOME),
-	KEY(1, 4, KEY_1),
-	KEY(2, 4, KEY_4),
-	KEY(3, 4, KEY_7),
-	KEY(4, 4, KEY_KPASTERISK),
-	KEY(5, 4, KEY_POWER),
-};
-
-static struct smc91x_platdata smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= H2P2_DBG_FPGA_ETHR_START,	/* Physical */
-		.end	= H2P2_DBG_FPGA_ETHR_START + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= INT_7XX_MPU_EXT_NIRQ,
-		.end	= 0,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct mtd_partition nor_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-	      .name		= "bootloader",
-	      .offset		= 0,
-	      .size		= SZ_128K,
-	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-	      .name		= "params",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_128K,
-	      .mask_flags	= 0,
-	},
-	/* kernel */
-	{
-	      .name		= "kernel",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= SZ_2M,
-	      .mask_flags	= 0
-	},
-	/* rest of flash is a file system */
-	{
-	      .name		= "rootfs",
-	      .offset		= MTDPART_OFS_APPEND,
-	      .size		= MTDPART_SIZ_FULL,
-	      .mask_flags	= 0
-	},
-};
-
-static struct physmap_flash_data nor_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-	.parts		= nor_partitions,
-	.nr_parts	= ARRAY_SIZE(nor_partitions),
-};
-
-static struct resource nor_resource = {
-	.start		= OMAP_CS0_PHYS,
-	.end		= OMAP_CS0_PHYS + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device nor_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &nor_data,
-	},
-	.num_resources	= 1,
-	.resource	= &nor_resource,
-};
-
-#define P2_NAND_RB_GPIO_PIN	62
-
-static int nand_dev_ready(struct nand_chip *chip)
-{
-	return gpio_get_value(P2_NAND_RB_GPIO_PIN);
-}
-
-static struct platform_nand_data nand_data = {
-	.chip	= {
-		.nr_chips		= 1,
-		.chip_offset		= 0,
-		.options		= NAND_SAMSUNG_LP_OPTIONS,
-	},
-	.ctrl	= {
-		.cmd_ctrl	= omap1_nand_cmd_ctl,
-		.dev_ready	= nand_dev_ready,
-	},
-};
-
-static struct resource nand_resource = {
-	.start		= OMAP_CS3_PHYS,
-	.end		= OMAP_CS3_PHYS + SZ_4K - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device nand_device = {
-	.name		= "gen_nand",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &nand_data,
-	},
-	.num_resources	= 1,
-	.resource	= &nand_resource,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct resource kp_resources[] = {
-	[0] = {
-		.start	= INT_7XX_MPUIO_KEYPAD,
-		.end	= INT_7XX_MPUIO_KEYPAD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static const struct matrix_keymap_data p2_keymap_data = {
-	.keymap		= p2_keymap,
-	.keymap_size	= ARRAY_SIZE(p2_keymap),
-};
-
-static struct omap_kp_platform_data kp_data = {
-	.rows		= 8,
-	.cols		= 8,
-	.keymap_data	= &p2_keymap_data,
-	.delay		= 4,
-	.dbounce	= true,
-};
-
-static struct platform_device kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(kp_resources),
-	.resource	= kp_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&nor_device,
-	&nand_device,
-	&smc91x_device,
-	&kp_device,
-};
-
-static const struct omap_lcd_config perseus2_lcd_config __initconst = {
-	.ctrl_name	= "internal",
-};
-
-static void __init perseus2_init_smc91x(void)
-{
-	__raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET);
-	mdelay(50);
-	__raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1,
-		   H2P2_DBG_FPGA_LAN_RESET);
-	mdelay(50);
-}
-
-static void __init omap_perseus2_init(void)
-{
-	/* Early, board-dependent init */
-
-	/*
-	 * Hold GSM Reset until needed
-	 */
-	omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
-
-	/*
-	 * UARTs -> done automagically by 8250 driver
-	 */
-
-	/*
-	 * CSx timings, GPIO Mux ... setup
-	 */
-
-	/* Flash: CS0 timings setup */
-	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
-	omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
-
-	/*
-	 * Ethernet support through the debug board
-	 * CS1 timings setup
-	 */
-	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
-	omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
-
-	/*
-	 * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
-	 * It is used as the Ethernet controller interrupt
-	 */
-	omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF,
-				OMAP7XX_IO_CONF_9);
-
-	perseus2_init_smc91x();
-
-	BUG_ON(gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0);
-	gpio_direction_input(P2_NAND_RB_GPIO_PIN);
-
-	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
-	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
-
-	/* Mux pins for keypad */
-	omap_cfg_reg(E2_7XX_KBR0);
-	omap_cfg_reg(J7_7XX_KBR1);
-	omap_cfg_reg(E1_7XX_KBR2);
-	omap_cfg_reg(F3_7XX_KBR3);
-	omap_cfg_reg(D2_7XX_KBR4);
-	omap_cfg_reg(C2_7XX_KBC0);
-	omap_cfg_reg(D3_7XX_KBC1);
-	omap_cfg_reg(E4_7XX_KBC2);
-	omap_cfg_reg(F4_7XX_KBC3);
-	omap_cfg_reg(E3_7XX_KBC4);
-
-	if (IS_ENABLED(CONFIG_SPI_OMAP_UWIRE)) {
-		/* configure pins: MPU_UW_nSCS1, MPU_UW_SDO, MPU_UW_SCLK */
-		int val = omap_readl(OMAP7XX_IO_CONF_9) & ~0x00EEE000;
-		omap_writel(val | 0x00AAA000, OMAP7XX_IO_CONF_9);
-	}
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	omap_serial_init();
-	omap_register_i2c_bus(1, 100, NULL, 0);
-
-	omapfb_set_lcd_config(&perseus2_lcd_config);
-}
-
-/* Only FPGA needs to be mapped here. All others are done with ioremap */
-static struct map_desc omap_perseus2_io_desc[] __initdata = {
-	{
-		.virtual	= H2P2_DBG_FPGA_BASE,
-		.pfn		= __phys_to_pfn(H2P2_DBG_FPGA_START),
-		.length		= H2P2_DBG_FPGA_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init omap_perseus2_map_io(void)
-{
-	omap7xx_map_io();
-	iotable_init(omap_perseus2_io_desc,
-		     ARRAY_SIZE(omap_perseus2_io_desc));
-}
-
-MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
-	/* Maintainer: Kevin Hilman <kjh@hilman.org> */
-	.atag_offset	= 0x100,
-	.map_io		= omap_perseus2_map_io,
-	.init_early     = omap1_init_early,
-	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
-	.init_machine	= omap_perseus2_init,
-	.init_late	= omap1_init_late,
-	.init_time	= omap1_timer_init,
-	.restart	= omap1_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index f0dbb0e8d8e7..0c0cdd5e77c7 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -335,7 +335,7 @@ static void __init omap_sx1_init(void)
 
 MACHINE_START(SX1, "OMAP310 based Siemens SX1")
 	.atag_offset	= 0x100,
-	.map_io		= omap15xx_map_io,
+	.map_io		= omap1_map_io,
 	.init_early     = omap1_init_early,
 	.init_irq	= omap1_init_irq,
 	.handle_irq	= omap1_handle_irq,
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 96d846c37c43..c58d200e4816 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -720,8 +720,6 @@ int __init omap1_clk_init(void)
 		cpu_mask |= CK_16XX;
 	if (cpu_is_omap1510())
 		cpu_mask |= CK_1510;
-	if (cpu_is_omap7xx())
-		cpu_mask |= CK_7XX;
 	if (cpu_is_omap310())
 		cpu_mask |= CK_310;
 
@@ -730,9 +728,6 @@ int __init omap1_clk_init(void)
 	ck_dpll1_p = &ck_dpll1;
 	ck_ref_p = &ck_ref;
 
-	if (cpu_is_omap7xx())
-		ck_ref.rate = 13000000;
-
 	pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n",
 		omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
 		omap_readw(ARM_CKCTL));
@@ -771,12 +766,6 @@ int __init omap1_clk_init(void)
 		}
 	}
 
-	if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
-		/* Select slicer output as OMAP input clock */
-		omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1,
-				OMAP7XX_PCC_UPLD_CTRL);
-	}
-
 	/* Amstrad Delta wants BCLK high when inactive */
 	if (machine_is_ams_delta())
 		omap_writel(omap_readl(ULPD_CLOCK_CTRL) |
@@ -784,11 +773,7 @@ int __init omap1_clk_init(void)
 				ULPD_CLOCK_CTRL);
 
 	/* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
-	/* (on 730, bit 13 must not be cleared) */
-	if (cpu_is_omap7xx())
-		omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL);
-	else
-		omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
+	omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
 
 	/* Put DSP/MPUI into reset until needed */
 	omap_writew(0, ARM_RSTCT1);
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h
index 5ceff05e15c0..7a7c3d9eb84a 100644
--- a/arch/arm/mach-omap1/common.h
+++ b/arch/arm/mach-omap1/common.h
@@ -35,34 +35,6 @@
 #include "soc.h"
 #include "i2c.h"
 
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-void omap7xx_map_io(void);
-#else
-static inline void omap7xx_map_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP15XX
-void omap1510_fpga_init_irq(void);
-void omap15xx_map_io(void);
-#else
-static inline void omap1510_fpga_init_irq(void)
-{
-}
-static inline void omap15xx_map_io(void)
-{
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP16XX
-void omap16xx_map_io(void);
-#else
-static inline void omap16xx_map_io(void)
-{
-}
-#endif
-
 #ifdef CONFIG_OMAP_SERIAL_WAKE
 int omap_serial_wakeup_init(void);
 #else
@@ -72,6 +44,7 @@ static inline int omap_serial_wakeup_init(void)
 }
 #endif
 
+void omap1_map_io(void);
 void omap1_init_early(void);
 void omap1_init_irq(void);
 void __exception_irq_entry omap1_handle_irq(struct pt_regs *regs);
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 80e94770582a..5304699c7a97 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -21,7 +21,6 @@
 #include "tc.h"
 #include "mux.h"
 
-#include "omap7xx.h"
 #include "hardware.h"
 #include "common.h"
 #include "clock.h"
@@ -63,8 +62,6 @@ static void omap_init_rtc(void)
 static inline void omap_init_rtc(void) {}
 #endif
 
-static inline void omap_init_mbox(void) { }
-
 /*-------------------------------------------------------------------------*/
 
 #if IS_ENABLED(CONFIG_MMC_OMAP)
@@ -73,22 +70,16 @@ static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
 			int controller_nr)
 {
 	if (controller_nr == 0) {
-		if (cpu_is_omap7xx()) {
-			omap_cfg_reg(MMC_7XX_CMD);
-			omap_cfg_reg(MMC_7XX_CLK);
-			omap_cfg_reg(MMC_7XX_DAT0);
-		} else {
-			omap_cfg_reg(MMC_CMD);
-			omap_cfg_reg(MMC_CLK);
-			omap_cfg_reg(MMC_DAT0);
-		}
+		omap_cfg_reg(MMC_CMD);
+		omap_cfg_reg(MMC_CLK);
+		omap_cfg_reg(MMC_DAT0);
 
 		if (cpu_is_omap1710()) {
 			omap_cfg_reg(M15_1710_MMC_CLKI);
 			omap_cfg_reg(P19_1710_MMC_CMDDIR);
 			omap_cfg_reg(P20_1710_MMC_DATDIR0);
 		}
-		if (mmc_controller->slots[0].wires == 4 && !cpu_is_omap7xx()) {
+		if (mmc_controller->slots[0].wires == 4) {
 			omap_cfg_reg(MMC_DAT1);
 			/* NOTE: DAT2 can be on W10 (here) or M15 */
 			if (!mmc_controller->slots[0].nomux)
@@ -154,8 +145,6 @@ static int __init omap_mmc_add(const char *name, int id, unsigned long base,
 	res[3].name = "tx";
 	res[3].flags = IORESOURCE_DMA;
 
-	if (cpu_is_omap7xx())
-		data->slots[0].features = MMC_OMAP7XX;
 	if (cpu_is_omap15xx())
 		data->slots[0].features = MMC_OMAP15XX;
 	if (cpu_is_omap16xx())
@@ -224,43 +213,6 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 
 /*-------------------------------------------------------------------------*/
 
-/* OMAP7xx SPI support */
-#if IS_ENABLED(CONFIG_SPI_OMAP_100K)
-
-struct platform_device omap_spi1 = {
-	.name           = "omap1_spi100k",
-	.id             = 1,
-};
-
-struct platform_device omap_spi2 = {
-	.name           = "omap1_spi100k",
-	.id             = 2,
-};
-
-static void omap_init_spi100k(void)
-{
-	if (!cpu_is_omap7xx())
-		return;
-
-	omap_spi1.dev.platform_data = ioremap(OMAP7XX_SPI1_BASE, 0x7ff);
-	if (omap_spi1.dev.platform_data)
-		platform_device_register(&omap_spi1);
-
-	omap_spi2.dev.platform_data = ioremap(OMAP7XX_SPI2_BASE, 0x7ff);
-	if (omap_spi2.dev.platform_data)
-		platform_device_register(&omap_spi2);
-}
-
-#else
-static inline void omap_init_spi100k(void)
-{
-}
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-static inline void omap_init_sti(void) {}
-
 /* Numbering for the SPI-capable controllers when used for SPI:
  * spi		= 1
  * uwire	= 2
@@ -363,10 +315,7 @@ static int __init omap1_init_devices(void)
 	 * in alphabetical order so they're easier to sort through.
 	 */
 
-	omap_init_mbox();
 	omap_init_rtc();
-	omap_init_spi100k();
-	omap_init_sti();
 	omap_init_uwire();
 	omap1_init_rng();
 
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index c3f280c3c5d7..756966cb715f 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -261,22 +261,6 @@ static const struct platform_device_info omap_dma_dev_info = {
 	.num_res = 1,
 };
 
-/* OMAP730, OMAP850 */
-static const struct dma_slave_map omap7xx_sdma_map[] = {
-	{ "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(8) },
-	{ "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(9) },
-	{ "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(10) },
-	{ "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(11) },
-	{ "mmci-omap.0", "tx", SDMA_FILTER_PARAM(21) },
-	{ "mmci-omap.0", "rx", SDMA_FILTER_PARAM(22) },
-	{ "omap_udc", "rx0", SDMA_FILTER_PARAM(26) },
-	{ "omap_udc", "rx1", SDMA_FILTER_PARAM(27) },
-	{ "omap_udc", "rx2", SDMA_FILTER_PARAM(28) },
-	{ "omap_udc", "tx0", SDMA_FILTER_PARAM(29) },
-	{ "omap_udc", "tx1", SDMA_FILTER_PARAM(30) },
-	{ "omap_udc", "tx2", SDMA_FILTER_PARAM(31) },
-};
-
 /* OMAP1510, OMAP1610*/
 static const struct dma_slave_map omap1xxx_sdma_map[] = {
 	{ "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(8) },
@@ -371,13 +355,8 @@ static int __init omap1_system_dma_init(void)
 	p.dma_attr = d;
 	p.errata = configure_dma_errata();
 
-	if (cpu_is_omap7xx()) {
-		p.slave_map = omap7xx_sdma_map;
-		p.slavecnt = ARRAY_SIZE(omap7xx_sdma_map);
-	} else {
-		p.slave_map = omap1xxx_sdma_map;
-		p.slavecnt = ARRAY_SIZE(omap1xxx_sdma_map);
-	}
+	p.slave_map = omap1xxx_sdma_map;
+	p.slavecnt = ARRAY_SIZE(omap1xxx_sdma_map);
 
 	ret = platform_device_add_data(pdev, &p, sizeof(p));
 	if (ret) {
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
deleted file mode 100644
index 4c71a195969f..000000000000
--- a/arch/arm/mach-omap1/fpga.c
+++ /dev/null
@@ -1,186 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-omap1/fpga.c
- *
- * Interrupt handler for OMAP-1510 Innovator FPGA
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Copyright (C) 2002 MontaVista Software, Inc.
- *
- * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
- * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-
-#include "hardware.h"
-#include "iomap.h"
-#include "common.h"
-#include "fpga.h"
-
-static void fpga_mask_irq(struct irq_data *d)
-{
-	unsigned int irq = d->irq - OMAP_FPGA_IRQ_BASE;
-
-	if (irq < 8)
-		__raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_LO)
-			      & ~(1 << irq)), OMAP1510_FPGA_IMR_LO);
-	else if (irq < 16)
-		__raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_HI)
-			      & ~(1 << (irq - 8))), OMAP1510_FPGA_IMR_HI);
-	else
-		__raw_writeb((__raw_readb(INNOVATOR_FPGA_IMR2)
-			      & ~(1 << (irq - 16))), INNOVATOR_FPGA_IMR2);
-}
-
-
-static inline u32 get_fpga_unmasked_irqs(void)
-{
-	return
-		((__raw_readb(OMAP1510_FPGA_ISR_LO) &
-		  __raw_readb(OMAP1510_FPGA_IMR_LO))) |
-		((__raw_readb(OMAP1510_FPGA_ISR_HI) &
-		  __raw_readb(OMAP1510_FPGA_IMR_HI)) << 8) |
-		((__raw_readb(INNOVATOR_FPGA_ISR2) &
-		  __raw_readb(INNOVATOR_FPGA_IMR2)) << 16);
-}
-
-
-static void fpga_ack_irq(struct irq_data *d)
-{
-	/* Don't need to explicitly ACK FPGA interrupts */
-}
-
-static void fpga_unmask_irq(struct irq_data *d)
-{
-	unsigned int irq = d->irq - OMAP_FPGA_IRQ_BASE;
-
-	if (irq < 8)
-		__raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_LO) | (1 << irq)),
-		     OMAP1510_FPGA_IMR_LO);
-	else if (irq < 16)
-		__raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_HI)
-			      | (1 << (irq - 8))), OMAP1510_FPGA_IMR_HI);
-	else
-		__raw_writeb((__raw_readb(INNOVATOR_FPGA_IMR2)
-			      | (1 << (irq - 16))), INNOVATOR_FPGA_IMR2);
-}
-
-static void fpga_mask_ack_irq(struct irq_data *d)
-{
-	fpga_mask_irq(d);
-	fpga_ack_irq(d);
-}
-
-static void innovator_fpga_IRQ_demux(struct irq_desc *desc)
-{
-	u32 stat;
-	int fpga_irq;
-
-	stat = get_fpga_unmasked_irqs();
-
-	if (!stat)
-		return;
-
-	for (fpga_irq = OMAP_FPGA_IRQ_BASE;
-	     (fpga_irq < OMAP_FPGA_IRQ_END) && stat;
-	     fpga_irq++, stat >>= 1) {
-		if (stat & 1) {
-			generic_handle_irq(fpga_irq);
-		}
-	}
-}
-
-static struct irq_chip omap_fpga_irq_ack = {
-	.name		= "FPGA-ack",
-	.irq_ack	= fpga_mask_ack_irq,
-	.irq_mask	= fpga_mask_irq,
-	.irq_unmask	= fpga_unmask_irq,
-};
-
-
-static struct irq_chip omap_fpga_irq = {
-	.name		= "FPGA",
-	.irq_ack	= fpga_ack_irq,
-	.irq_mask	= fpga_mask_irq,
-	.irq_unmask	= fpga_unmask_irq,
-};
-
-/*
- * All of the FPGA interrupt request inputs except for the touchscreen are
- * edge-sensitive; the touchscreen is level-sensitive.  The edge-sensitive
- * interrupts are acknowledged as a side-effect of reading the interrupt
- * status register from the FPGA.  The edge-sensitive interrupt inputs
- * cause a problem with level interrupt requests, such as Ethernet.  The
- * problem occurs when a level interrupt request is asserted while its
- * interrupt input is masked in the FPGA, which results in a missed
- * interrupt.
- *
- * In an attempt to workaround the problem with missed interrupts, the
- * mask_ack routine for all of the FPGA interrupts has been changed from
- * fpga_mask_ack_irq() to fpga_ack_irq() so that the specific FPGA interrupt
- * being serviced is left unmasked.  We can do this because the FPGA cascade
- * interrupt is run with all interrupts masked.
- *
- * Limited testing indicates that this workaround appears to be effective
- * for the smc9194 Ethernet driver used on the Innovator.  It should work
- * on other FPGA interrupts as well, but any drivers that explicitly mask
- * interrupts at the interrupt controller via disable_irq/enable_irq
- * could pose a problem.
- */
-void omap1510_fpga_init_irq(void)
-{
-	int i, res;
-
-	__raw_writeb(0, OMAP1510_FPGA_IMR_LO);
-	__raw_writeb(0, OMAP1510_FPGA_IMR_HI);
-	__raw_writeb(0, INNOVATOR_FPGA_IMR2);
-
-	for (i = OMAP_FPGA_IRQ_BASE; i < OMAP_FPGA_IRQ_END; i++) {
-
-		if (i == OMAP1510_INT_FPGA_TS) {
-			/*
-			 * The touchscreen interrupt is level-sensitive, so
-			 * we'll use the regular mask_ack routine for it.
-			 */
-			irq_set_chip(i, &omap_fpga_irq_ack);
-		}
-		else {
-			/*
-			 * All FPGA interrupts except the touchscreen are
-			 * edge-sensitive, so we won't mask them.
-			 */
-			irq_set_chip(i, &omap_fpga_irq);
-		}
-
-		irq_set_handler(i, handle_edge_irq);
-		irq_clear_status_flags(i, IRQ_NOREQUEST);
-	}
-
-	/*
-	 * The FPGA interrupt line is connected to GPIO13. Claim this pin for
-	 * the ARM.
-	 *
-	 * NOTE: For general GPIO/MPUIO access and interrupts, please see
-	 * gpio.[ch]
-	 */
-	res = gpio_request(13, "FPGA irq");
-	if (res) {
-		pr_err("%s failed to get gpio\n", __func__);
-		return;
-	}
-	gpio_direction_input(13);
-	irq_set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
-	irq_set_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux);
-}
diff --git a/arch/arm/mach-omap1/fpga.h b/arch/arm/mach-omap1/fpga.h
deleted file mode 100644
index 7e7450edacc1..000000000000
--- a/arch/arm/mach-omap1/fpga.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Interrupt handler for OMAP-1510 FPGA
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Copyright (C) 2002 MontaVista Software, Inc.
- *
- * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
- * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
- */
-
-#ifndef __ASM_ARCH_OMAP_FPGA_H
-#define __ASM_ARCH_OMAP_FPGA_H
-
-/*
- * ---------------------------------------------------------------------------
- *  H2/P2 Debug board FPGA
- * ---------------------------------------------------------------------------
- */
-/* maps in the FPGA registers and the ETHR registers */
-#define H2P2_DBG_FPGA_BASE		0xE8000000		/* VA */
-#define H2P2_DBG_FPGA_SIZE		SZ_4K			/* SIZE */
-#define H2P2_DBG_FPGA_START		0x04000000		/* PA */
-
-#define H2P2_DBG_FPGA_ETHR_START	(H2P2_DBG_FPGA_START + 0x300)
-#define H2P2_DBG_FPGA_FPGA_REV		IOMEM(H2P2_DBG_FPGA_BASE + 0x10)	/* FPGA Revision */
-#define H2P2_DBG_FPGA_BOARD_REV		IOMEM(H2P2_DBG_FPGA_BASE + 0x12)	/* Board Revision */
-#define H2P2_DBG_FPGA_GPIO		IOMEM(H2P2_DBG_FPGA_BASE + 0x14)	/* GPIO outputs */
-#define H2P2_DBG_FPGA_LEDS		IOMEM(H2P2_DBG_FPGA_BASE + 0x16)	/* LEDs outputs */
-#define H2P2_DBG_FPGA_MISC_INPUTS	IOMEM(H2P2_DBG_FPGA_BASE + 0x18)	/* Misc inputs */
-#define H2P2_DBG_FPGA_LAN_STATUS	IOMEM(H2P2_DBG_FPGA_BASE + 0x1A)	/* LAN Status line */
-#define H2P2_DBG_FPGA_LAN_RESET		IOMEM(H2P2_DBG_FPGA_BASE + 0x1C)	/* LAN Reset line */
-
-/* LEDs definition on debug board (16 LEDs, all physically green) */
-#define H2P2_DBG_FPGA_LED_GREEN		(1 << 15)
-#define H2P2_DBG_FPGA_LED_AMBER		(1 << 14)
-#define H2P2_DBG_FPGA_LED_RED		(1 << 13)
-#define H2P2_DBG_FPGA_LED_BLUE		(1 << 12)
-/*  cpu0 load-meter LEDs */
-#define H2P2_DBG_FPGA_LOAD_METER	(1 << 0)	// A bit of fun on our board ...
-#define H2P2_DBG_FPGA_LOAD_METER_SIZE	11
-#define H2P2_DBG_FPGA_LOAD_METER_MASK	((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
-
-#define H2P2_DBG_FPGA_P2_LED_TIMER		(1 << 0)
-#define H2P2_DBG_FPGA_P2_LED_IDLE		(1 << 1)
-
-#endif
diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
deleted file mode 100644
index c372b357eab4..000000000000
--- a/arch/arm/mach-omap1/gpio7xx.c
+++ /dev/null
@@ -1,272 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * OMAP7xx specific gpio init
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
- *
- * Author:
- *	Charulatha V <charu@ti.com>
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_data/gpio-omap.h>
-
-#include "irqs.h"
-#include "soc.h"
-
-#define OMAP7XX_GPIO1_BASE		0xfffbc000
-#define OMAP7XX_GPIO2_BASE		0xfffbc800
-#define OMAP7XX_GPIO3_BASE		0xfffbd000
-#define OMAP7XX_GPIO4_BASE		0xfffbd800
-#define OMAP7XX_GPIO5_BASE		0xfffbe000
-#define OMAP7XX_GPIO6_BASE		0xfffbe800
-#define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
-
-/* mpu gpio */
-static struct resource omap7xx_mpu_gpio_resources[] = {
-	{
-		.start	= OMAP1_MPUIO_VBASE,
-		.end	= OMAP1_MPUIO_VBASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_7XX_MPUIO,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct omap_gpio_reg_offs omap7xx_mpuio_regs = {
-	.revision	= USHRT_MAX,
-	.direction	= OMAP_MPUIO_IO_CNTL / 2,
-	.datain		= OMAP_MPUIO_INPUT_LATCH / 2,
-	.dataout	= OMAP_MPUIO_OUTPUT / 2,
-	.irqstatus	= OMAP_MPUIO_GPIO_INT / 2,
-	.irqenable	= OMAP_MPUIO_GPIO_MASKIT / 2,
-	.irqenable_inv	= true,
-	.irqctrl	= OMAP_MPUIO_GPIO_INT_EDGE >> 1,
-};
-
-static struct omap_gpio_platform_data omap7xx_mpu_gpio_config = {
-	.is_mpuio		= true,
-	.bank_width		= 16,
-	.bank_stride		= 2,
-	.regs                   = &omap7xx_mpuio_regs,
-};
-
-static struct platform_device omap7xx_mpu_gpio = {
-	.name           = "omap_gpio",
-	.id             = 0,
-	.dev            = {
-		.platform_data = &omap7xx_mpu_gpio_config,
-	},
-	.num_resources = ARRAY_SIZE(omap7xx_mpu_gpio_resources),
-	.resource = omap7xx_mpu_gpio_resources,
-};
-
-/* gpio1 */
-static struct resource omap7xx_gpio1_resources[] = {
-	{
-		.start	= OMAP7XX_GPIO1_BASE,
-		.end	= OMAP7XX_GPIO1_BASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_7XX_GPIO_BANK1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct omap_gpio_reg_offs omap7xx_gpio_regs = {
-	.revision	= USHRT_MAX,
-	.direction	= OMAP7XX_GPIO_DIR_CONTROL,
-	.datain		= OMAP7XX_GPIO_DATA_INPUT,
-	.dataout	= OMAP7XX_GPIO_DATA_OUTPUT,
-	.irqstatus	= OMAP7XX_GPIO_INT_STATUS,
-	.irqenable	= OMAP7XX_GPIO_INT_MASK,
-	.irqenable_inv	= true,
-	.irqctrl	= OMAP7XX_GPIO_INT_CONTROL,
-};
-
-static struct omap_gpio_platform_data omap7xx_gpio1_config = {
-	.bank_width		= 32,
-	.regs			= &omap7xx_gpio_regs,
-};
-
-static struct platform_device omap7xx_gpio1 = {
-	.name           = "omap_gpio",
-	.id             = 1,
-	.dev            = {
-		.platform_data = &omap7xx_gpio1_config,
-	},
-	.num_resources = ARRAY_SIZE(omap7xx_gpio1_resources),
-	.resource = omap7xx_gpio1_resources,
-};
-
-/* gpio2 */
-static struct resource omap7xx_gpio2_resources[] = {
-	{
-		.start	= OMAP7XX_GPIO2_BASE,
-		.end	= OMAP7XX_GPIO2_BASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_7XX_GPIO_BANK2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct omap_gpio_platform_data omap7xx_gpio2_config = {
-	.bank_width		= 32,
-	.regs			= &omap7xx_gpio_regs,
-};
-
-static struct platform_device omap7xx_gpio2 = {
-	.name           = "omap_gpio",
-	.id             = 2,
-	.dev            = {
-		.platform_data = &omap7xx_gpio2_config,
-	},
-	.num_resources = ARRAY_SIZE(omap7xx_gpio2_resources),
-	.resource = omap7xx_gpio2_resources,
-};
-
-/* gpio3 */
-static struct resource omap7xx_gpio3_resources[] = {
-	{
-		.start	= OMAP7XX_GPIO3_BASE,
-		.end	= OMAP7XX_GPIO3_BASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_7XX_GPIO_BANK3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct omap_gpio_platform_data omap7xx_gpio3_config = {
-	.bank_width		= 32,
-	.regs			= &omap7xx_gpio_regs,
-};
-
-static struct platform_device omap7xx_gpio3 = {
-	.name           = "omap_gpio",
-	.id             = 3,
-	.dev            = {
-		.platform_data = &omap7xx_gpio3_config,
-	},
-	.num_resources = ARRAY_SIZE(omap7xx_gpio3_resources),
-	.resource = omap7xx_gpio3_resources,
-};
-
-/* gpio4 */
-static struct resource omap7xx_gpio4_resources[] = {
-	{
-		.start	= OMAP7XX_GPIO4_BASE,
-		.end	= OMAP7XX_GPIO4_BASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_7XX_GPIO_BANK4,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct omap_gpio_platform_data omap7xx_gpio4_config = {
-	.bank_width		= 32,
-	.regs			= &omap7xx_gpio_regs,
-};
-
-static struct platform_device omap7xx_gpio4 = {
-	.name           = "omap_gpio",
-	.id             = 4,
-	.dev            = {
-		.platform_data = &omap7xx_gpio4_config,
-	},
-	.num_resources = ARRAY_SIZE(omap7xx_gpio4_resources),
-	.resource = omap7xx_gpio4_resources,
-};
-
-/* gpio5 */
-static struct resource omap7xx_gpio5_resources[] = {
-	{
-		.start	= OMAP7XX_GPIO5_BASE,
-		.end	= OMAP7XX_GPIO5_BASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_7XX_GPIO_BANK5,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct omap_gpio_platform_data omap7xx_gpio5_config = {
-	.bank_width		= 32,
-	.regs			= &omap7xx_gpio_regs,
-};
-
-static struct platform_device omap7xx_gpio5 = {
-	.name           = "omap_gpio",
-	.id             = 5,
-	.dev            = {
-		.platform_data = &omap7xx_gpio5_config,
-	},
-	.num_resources = ARRAY_SIZE(omap7xx_gpio5_resources),
-	.resource = omap7xx_gpio5_resources,
-};
-
-/* gpio6 */
-static struct resource omap7xx_gpio6_resources[] = {
-	{
-		.start	= OMAP7XX_GPIO6_BASE,
-		.end	= OMAP7XX_GPIO6_BASE + SZ_2K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_7XX_GPIO_BANK6,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct omap_gpio_platform_data omap7xx_gpio6_config = {
-	.bank_width		= 32,
-	.regs			= &omap7xx_gpio_regs,
-};
-
-static struct platform_device omap7xx_gpio6 = {
-	.name           = "omap_gpio",
-	.id             = 6,
-	.dev            = {
-		.platform_data = &omap7xx_gpio6_config,
-	},
-	.num_resources = ARRAY_SIZE(omap7xx_gpio6_resources),
-	.resource = omap7xx_gpio6_resources,
-};
-
-static struct platform_device *omap7xx_gpio_dev[] __initdata = {
-	&omap7xx_mpu_gpio,
-	&omap7xx_gpio1,
-	&omap7xx_gpio2,
-	&omap7xx_gpio3,
-	&omap7xx_gpio4,
-	&omap7xx_gpio5,
-	&omap7xx_gpio6,
-};
-
-/*
- * omap7xx_gpio_init needs to be done before
- * machine_init functions access gpio APIs.
- * Hence omap7xx_gpio_init is a postcore_initcall.
- */
-static int __init omap7xx_gpio_init(void)
-{
-	int i;
-
-	if (!cpu_is_omap7xx())
-		return -EINVAL;
-
-	for (i = 0; i < ARRAY_SIZE(omap7xx_gpio_dev); i++)
-		platform_device_register(omap7xx_gpio_dev[i]);
-
-	return 0;
-}
-postcore_initcall(omap7xx_gpio_init);
diff --git a/arch/arm/mach-omap1/hardware.h b/arch/arm/mach-omap1/hardware.h
index c228234a1ed4..0aa571c9e0eb 100644
--- a/arch/arm/mach-omap1/hardware.h
+++ b/arch/arm/mach-omap1/hardware.h
@@ -114,6 +114,10 @@ static inline u32 omap_cs3_phys(void)
 
 #define OMAP_IH1_BASE		0xfffecb00
 #define OMAP_IH2_BASE		0xfffe0000
+#define OMAP_IH2_0_BASE		(0xfffe0000)
+#define OMAP_IH2_1_BASE		(0xfffe0100)
+#define OMAP_IH2_2_BASE		(0xfffe0200)
+#define OMAP_IH2_3_BASE		(0xfffe0300)
 
 #define OMAP_IH1_ITR		(OMAP_IH1_BASE + 0x00)
 #define OMAP_IH1_MIR		(OMAP_IH1_BASE + 0x04)
@@ -131,6 +135,38 @@ static inline u32 omap_cs3_phys(void)
 #define OMAP_IH2_ILR0		(OMAP_IH2_BASE + 0x1c)
 #define OMAP_IH2_ISR		(OMAP_IH2_BASE + 0x9c)
 
+#define OMAP_IH2_0_ITR		(OMAP_IH2_0_BASE + 0x00)
+#define OMAP_IH2_0_MIR		(OMAP_IH2_0_BASE + 0x04)
+#define OMAP_IH2_0_SIR_IRQ	(OMAP_IH2_0_BASE + 0x10)
+#define OMAP_IH2_0_SIR_FIQ	(OMAP_IH2_0_BASE + 0x14)
+#define OMAP_IH2_0_CONTROL	(OMAP_IH2_0_BASE + 0x18)
+#define OMAP_IH2_0_ILR0		(OMAP_IH2_0_BASE + 0x1c)
+#define OMAP_IH2_0_ISR		(OMAP_IH2_0_BASE + 0x9c)
+
+#define OMAP_IH2_1_ITR		(OMAP_IH2_1_BASE + 0x00)
+#define OMAP_IH2_1_MIR		(OMAP_IH2_1_BASE + 0x04)
+#define OMAP_IH2_1_SIR_IRQ	(OMAP_IH2_1_BASE + 0x10)
+#define OMAP_IH2_1_SIR_FIQ	(OMAP_IH2_1_BASE + 0x14)
+#define OMAP_IH2_1_CONTROL	(OMAP_IH2_1_BASE + 0x18)
+#define OMAP_IH2_1_ILR1		(OMAP_IH2_1_BASE + 0x1c)
+#define OMAP_IH2_1_ISR		(OMAP_IH2_1_BASE + 0x9c)
+
+#define OMAP_IH2_2_ITR		(OMAP_IH2_2_BASE + 0x00)
+#define OMAP_IH2_2_MIR		(OMAP_IH2_2_BASE + 0x04)
+#define OMAP_IH2_2_SIR_IRQ	(OMAP_IH2_2_BASE + 0x10)
+#define OMAP_IH2_2_SIR_FIQ	(OMAP_IH2_2_BASE + 0x14)
+#define OMAP_IH2_2_CONTROL	(OMAP_IH2_2_BASE + 0x18)
+#define OMAP_IH2_2_ILR2		(OMAP_IH2_2_BASE + 0x1c)
+#define OMAP_IH2_2_ISR		(OMAP_IH2_2_BASE + 0x9c)
+
+#define OMAP_IH2_3_ITR		(OMAP_IH2_3_BASE + 0x00)
+#define OMAP_IH2_3_MIR		(OMAP_IH2_3_BASE + 0x04)
+#define OMAP_IH2_3_SIR_IRQ	(OMAP_IH2_3_BASE + 0x10)
+#define OMAP_IH2_3_SIR_FIQ	(OMAP_IH2_3_BASE + 0x14)
+#define OMAP_IH2_3_CONTROL	(OMAP_IH2_3_BASE + 0x18)
+#define OMAP_IH2_3_ILR3		(OMAP_IH2_3_BASE + 0x1c)
+#define OMAP_IH2_3_ISR		(OMAP_IH2_3_BASE + 0x9c)
+
 #define IRQ_ITR_REG_OFFSET	0x00
 #define IRQ_MIR_REG_OFFSET	0x04
 #define IRQ_SIR_IRQ_REG_OFFSET	0x10
@@ -184,12 +220,16 @@ static inline u32 omap_cs3_phys(void)
 
 /*
  * ---------------------------------------------------------------------------
- * Processor specific defines
+ * DSP
  * ---------------------------------------------------------------------------
  */
 
-#include "omap7xx.h"
-#include "omap1510.h"
-#include "omap16xx.h"
+#define OMAP1_DSP_BASE		0xE0000000
+#define OMAP1_DSP_SIZE		0x28000
+#define OMAP1_DSP_START		0xE0000000
+
+#define OMAP1_DSPREG_BASE	0xE1000000
+#define OMAP1_DSPREG_SIZE	SZ_128K
+#define OMAP1_DSPREG_START	0xE1000000
 
 #endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c
index 22f945360599..94d3e7883e02 100644
--- a/arch/arm/mach-omap1/i2c.c
+++ b/arch/arm/mach-omap1/i2c.c
@@ -25,13 +25,8 @@ static struct platform_device omap_i2c_devices[1] = {
 
 static void __init omap1_i2c_mux_pins(int bus_id)
 {
-	if (cpu_is_omap7xx()) {
-		omap_cfg_reg(I2C_7XX_SDA);
-		omap_cfg_reg(I2C_7XX_SCL);
-	} else {
-		omap_cfg_reg(I2C_SDA);
-		omap_cfg_reg(I2C_SCL);
-	}
+	omap_cfg_reg(I2C_SDA);
+	omap_cfg_reg(I2C_SCL);
 }
 
 int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata,
@@ -68,10 +63,7 @@ int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata,
 
 	/* how the cpu bus is wired up differs for 7xx only */
 
-	if (cpu_is_omap7xx())
-		pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1;
-	else
-		pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2;
+	pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2;
 
 	pdev->dev.platform_data = pdata;
 
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 0074b011a05a..1f20fe99be57 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -22,92 +22,32 @@
  * The machine specific code may provide the extra mapping besides the
  * default mapping provided here.
  */
-#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
-static struct map_desc omap7xx_io_desc[] __initdata = {
+static struct map_desc omap1_io_desc[] __initdata = {
 	{
 		.virtual	= OMAP1_IO_VIRT,
 		.pfn		= __phys_to_pfn(OMAP1_IO_PHYS),
 		.length		= OMAP1_IO_SIZE,
 		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= OMAP7XX_DSP_BASE,
-		.pfn		= __phys_to_pfn(OMAP7XX_DSP_START),
-		.length		= OMAP7XX_DSP_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= OMAP7XX_DSPREG_BASE,
-		.pfn		= __phys_to_pfn(OMAP7XX_DSPREG_START),
-		.length		= OMAP7XX_DSPREG_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-#endif
-
-#ifdef CONFIG_ARCH_OMAP15XX
-static struct map_desc omap1510_io_desc[] __initdata = {
-	{
-		.virtual	= OMAP1_IO_VIRT,
-		.pfn		= __phys_to_pfn(OMAP1_IO_PHYS),
-		.length		= OMAP1_IO_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= OMAP1510_DSP_BASE,
-		.pfn		= __phys_to_pfn(OMAP1510_DSP_START),
-		.length		= OMAP1510_DSP_SIZE,
-		.type		= MT_DEVICE
 	}, {
-		.virtual	= OMAP1510_DSPREG_BASE,
-		.pfn		= __phys_to_pfn(OMAP1510_DSPREG_START),
-		.length		= OMAP1510_DSPREG_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-#endif
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-static struct map_desc omap16xx_io_desc[] __initdata = {
-	{
-		.virtual	= OMAP1_IO_VIRT,
-		.pfn		= __phys_to_pfn(OMAP1_IO_PHYS),
-		.length		= OMAP1_IO_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= OMAP16XX_DSP_BASE,
-		.pfn		= __phys_to_pfn(OMAP16XX_DSP_START),
-		.length		= OMAP16XX_DSP_SIZE,
+		.virtual	= OMAP1_DSP_BASE,
+		.pfn		= __phys_to_pfn(OMAP1_DSP_START),
+		.length		= OMAP1_DSP_SIZE,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= OMAP16XX_DSPREG_BASE,
-		.pfn		= __phys_to_pfn(OMAP16XX_DSPREG_START),
-		.length		= OMAP16XX_DSPREG_SIZE,
+		.virtual	= OMAP1_DSPREG_BASE,
+		.pfn		= __phys_to_pfn(OMAP1_DSPREG_START),
+		.length		= OMAP1_DSPREG_SIZE,
 		.type		= MT_DEVICE
 	}
 };
-#endif
 
-#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
-void __init omap7xx_map_io(void)
-{
-	iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc));
-}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP15XX
-void __init omap15xx_map_io(void)
-{
-	iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
-}
-#endif
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-void __init omap16xx_map_io(void)
+/*
+ * Maps common IO regions for omap1
+ */
+void __init omap1_map_io(void)
 {
-	iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc));
+	iotable_init(omap1_io_desc, ARRAY_SIZE(omap1_io_desc));
 }
-#endif
 
 /*
  * Common low-level hardware init for omap1.
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 70868e9f19ac..9ccc784fd614 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -110,14 +110,6 @@ static void omap_irq_set_cfg(int irq, int fiq, int priority, int trigger)
 	irq_bank_writel(val, bank, offset);
 }
 
-#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
-static struct omap_irq_bank omap7xx_irq_banks[] = {
-	{ .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3f8e22f },
-	{ .base_reg = OMAP_IH2_BASE,		.trigger_map = 0xfdb9c1f2 },
-	{ .base_reg = OMAP_IH2_BASE + 0x100,	.trigger_map = 0x800040f3 },
-};
-#endif
-
 #ifdef CONFIG_ARCH_OMAP15XX
 static struct omap_irq_bank omap1510_irq_banks[] = {
 	{ .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3febfff },
@@ -194,12 +186,6 @@ void __init omap1_init_irq(void)
 	int i, j, irq_base;
 	unsigned long nr_irqs;
 
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	if (cpu_is_omap7xx()) {
-		irq_banks = omap7xx_irq_banks;
-		irq_bank_count = ARRAY_SIZE(omap7xx_irq_banks);
-	}
-#endif
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		irq_banks = omap1510_irq_banks;
@@ -230,7 +216,7 @@ void __init omap1_init_irq(void)
 		pr_warn("Couldn't allocate IRQ numbers\n");
 		irq_base = 0;
 	}
-	omap_l2_irq = cpu_is_omap7xx() ? irq_base + 1 : irq_base;
+	omap_l2_irq = irq_base;
 	omap_l2_irq -= NR_IRQS_LEGACY;
 
 	domain = irq_domain_add_legacy(NULL, nr_irqs, irq_base, 0,
@@ -249,10 +235,6 @@ void __init omap1_init_irq(void)
 	irq_bank_writel(0x03, 0, IRQ_CONTROL_REG_OFFSET);
 	irq_bank_writel(0x03, 1, IRQ_CONTROL_REG_OFFSET);
 
-	/* Enable interrupts in global mask */
-	if (cpu_is_omap7xx())
-		irq_bank_writel(0x0, 0, IRQ_GMR_REG_OFFSET);
-
 	/* Install the interrupt handlers for each bank */
 	for (i = 0; i < irq_bank_count; i++) {
 		for (j = i * 32; j < (i + 1) * 32; j++) {
diff --git a/arch/arm/mach-omap1/irqs.h b/arch/arm/mach-omap1/irqs.h
index 2851acfe5ff3..3ab7050b1b6b 100644
--- a/arch/arm/mach-omap1/irqs.h
+++ b/arch/arm/mach-omap1/irqs.h
@@ -231,15 +231,6 @@
 #define IH_MPUIO_BASE		(OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
 #define OMAP_IRQ_END		(IH_MPUIO_BASE + 16)
 
-/* External FPGA handles interrupts on Innovator boards */
-#define	OMAP_FPGA_IRQ_BASE	(OMAP_IRQ_END)
-#ifdef	CONFIG_MACH_OMAP_INNOVATOR
-#define OMAP_FPGA_NR_IRQS	24
-#else
-#define OMAP_FPGA_NR_IRQS	0
-#endif
-#define OMAP_FPGA_IRQ_END	(OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
-
 #define OMAP_IRQ_BIT(irq)	(1 << ((irq - NR_IRQS_LEGACY) % 32))
 
 #ifdef CONFIG_FIQ
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index b1632cbe37e6..37863bdce9ea 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -89,76 +89,6 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = {
 #define OMAP1610_MCBSP2_BASE	0xfffb1000
 #define OMAP1610_MCBSP3_BASE	0xe1017000
 
-struct resource omap7xx_mcbsp_res[][6] = {
-	{
-		{
-			.start = OMAP7XX_MCBSP1_BASE,
-			.end   = OMAP7XX_MCBSP1_BASE + SZ_256,
-			.flags = IORESOURCE_MEM,
-		},
-		{
-			.name  = "rx",
-			.start = INT_7XX_McBSP1RX,
-			.flags = IORESOURCE_IRQ,
-		},
-		{
-			.name  = "tx",
-			.start = INT_7XX_McBSP1TX,
-			.flags = IORESOURCE_IRQ,
-		},
-		{
-			.name  = "rx",
-			.start = 9,
-			.flags = IORESOURCE_DMA,
-		},
-		{
-			.name  = "tx",
-			.start = 8,
-			.flags = IORESOURCE_DMA,
-		},
-	},
-	{
-		{
-			.start = OMAP7XX_MCBSP2_BASE,
-			.end   = OMAP7XX_MCBSP2_BASE + SZ_256,
-			.flags = IORESOURCE_MEM,
-		},
-		{
-			.name  = "rx",
-			.start = INT_7XX_McBSP2RX,
-			.flags = IORESOURCE_IRQ,
-		},
-		{
-			.name  = "tx",
-			.start = INT_7XX_McBSP2TX,
-			.flags = IORESOURCE_IRQ,
-		},
-		{
-			.name  = "rx",
-			.start = 11,
-			.flags = IORESOURCE_DMA,
-		},
-		{
-			.name  = "tx",
-			.start = 10,
-			.flags = IORESOURCE_DMA,
-		},
-	},
-};
-
-#define omap7xx_mcbsp_res_0		omap7xx_mcbsp_res[0]
-
-static struct omap_mcbsp_platform_data omap7xx_mcbsp_pdata[] = {
-	{
-		.ops		= &omap1_mcbsp_ops,
-	},
-	{
-		.ops		= &omap1_mcbsp_ops,
-	},
-};
-#define OMAP7XX_MCBSP_RES_SZ		ARRAY_SIZE(omap7xx_mcbsp_res[1])
-#define OMAP7XX_MCBSP_COUNT		ARRAY_SIZE(omap7xx_mcbsp_res)
-
 struct resource omap15xx_mcbsp_res[][6] = {
 	{
 		{
@@ -397,12 +327,6 @@ static int __init omap1_mcbsp_init(void)
 	if (!cpu_class_is_omap1())
 		return -ENODEV;
 
-	if (cpu_is_omap7xx())
-		omap_mcbsp_register_board_cfg(omap7xx_mcbsp_res_0,
-					OMAP7XX_MCBSP_RES_SZ,
-					omap7xx_mcbsp_pdata,
-					OMAP7XX_MCBSP_COUNT);
-
 	if (cpu_is_omap15xx())
 		omap_mcbsp_register_board_cfg(omap15xx_mcbsp_res_0,
 					OMAP15XX_MCBSP_RES_SZ,
diff --git a/arch/arm/mach-omap1/mtd-xip.h b/arch/arm/mach-omap1/mtd-xip.h
index 5ae312ff08a1..cbeda46dd526 100644
--- a/arch/arm/mach-omap1/mtd-xip.h
+++ b/arch/arm/mach-omap1/mtd-xip.h
@@ -42,11 +42,7 @@ static inline unsigned long xip_omap_mpu_timer_read(int nr)
  * (see linux/mtd/xip.h)
  */
 
-#ifdef CONFIG_MACH_OMAP_PERSEUS2
-#define xip_elapsed_since(x)	(signed)((~xip_omap_mpu_timer_read(0) - (x)) / 7)
-#else
 #define xip_elapsed_since(x)	(signed)((~xip_omap_mpu_timer_read(0) - (x)) / 6)
-#endif
 
 /*
  * xip_cpu_idle() is used when waiting for a delay equal or larger than
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index 2d9458ff1d29..4456fbc8aa3d 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -21,52 +21,6 @@
 
 static struct omap_mux_cfg arch_mux_cfg;
 
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-static struct pin_config omap7xx_pins[] = {
-MUX_CFG_7XX("E2_7XX_KBR0",        12,   21,    0,   20,   1, 0)
-MUX_CFG_7XX("J7_7XX_KBR1",        12,   25,    0,   24,   1, 0)
-MUX_CFG_7XX("E1_7XX_KBR2",        12,   29,    0,   28,   1, 0)
-MUX_CFG_7XX("F3_7XX_KBR3",        13,    1,    0,    0,   1, 0)
-MUX_CFG_7XX("D2_7XX_KBR4",        13,    5,    0,    4,   1, 0)
-MUX_CFG_7XX("C2_7XX_KBC0",        13,    9,    0,    8,   1, 0)
-MUX_CFG_7XX("D3_7XX_KBC1",        13,   13,    0,   12,   1, 0)
-MUX_CFG_7XX("E4_7XX_KBC2",        13,   17,    0,   16,   1, 0)
-MUX_CFG_7XX("F4_7XX_KBC3",        13,   21,    0,   20,   1, 0)
-MUX_CFG_7XX("E3_7XX_KBC4",        13,   25,    0,   24,   1, 0)
-
-MUX_CFG_7XX("AA17_7XX_USB_DM",     2,   21,    0,   20,   0, 0)
-MUX_CFG_7XX("W16_7XX_USB_PU_EN",   2,   25,    0,   24,   0, 0)
-MUX_CFG_7XX("W17_7XX_USB_VBUSI",   2,   29,    6,   28,   1, 0)
-MUX_CFG_7XX("W18_7XX_USB_DMCK_OUT",3,    3,    1,    2,   0, 0)
-MUX_CFG_7XX("W19_7XX_USB_DCRST",   3,    7,    1,    6,   0, 0)
-
-/* MMC Pins */
-MUX_CFG_7XX("MMC_7XX_CMD",         2,    9,    0,    8,   1, 0)
-MUX_CFG_7XX("MMC_7XX_CLK",         2,   13,    0,   12,   1, 0)
-MUX_CFG_7XX("MMC_7XX_DAT0",        2,   17,    0,   16,   1, 0)
-
-/* I2C interface */
-MUX_CFG_7XX("I2C_7XX_SCL",         5,    1,    0,    0,   1, 0)
-MUX_CFG_7XX("I2C_7XX_SDA",         5,    5,    0,    0,   1, 0)
-
-/* SPI pins */
-MUX_CFG_7XX("SPI_7XX_1",           6,    5,    4,    4,   1, 0)
-MUX_CFG_7XX("SPI_7XX_2",           6,    9,    4,    8,   1, 0)
-MUX_CFG_7XX("SPI_7XX_3",           6,   13,    4,   12,   1, 0)
-MUX_CFG_7XX("SPI_7XX_4",           6,   17,    4,   16,   1, 0)
-MUX_CFG_7XX("SPI_7XX_5",           8,   25,    0,   24,   0, 0)
-MUX_CFG_7XX("SPI_7XX_6",           9,    5,    0,    4,   0, 0)
-
-/* UART pins */
-MUX_CFG_7XX("UART_7XX_1",          3,   21,    0,   20,   0, 0)
-MUX_CFG_7XX("UART_7XX_2",          8,    1,    6,    0,   0, 0)
-};
-#define OMAP7XX_PINS_SZ		ARRAY_SIZE(omap7xx_pins)
-#else
-#define omap7xx_pins		NULL
-#define OMAP7XX_PINS_SZ		0
-#endif	/* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */
-
 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
 static struct pin_config omap1xxx_pins[] = {
 /*
@@ -489,12 +443,6 @@ EXPORT_SYMBOL(omap_cfg_reg);
 
 int __init omap1_mux_init(void)
 {
-	if (cpu_is_omap7xx()) {
-		arch_mux_cfg.pins	= omap7xx_pins;
-		arch_mux_cfg.size	= OMAP7XX_PINS_SZ;
-		arch_mux_cfg.cfg_reg	= omap1_cfg_reg;
-	}
-
 	if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
 		arch_mux_cfg.pins	= omap1xxx_pins;
 		arch_mux_cfg.size	= OMAP1XXX_PINS_SZ;
diff --git a/arch/arm/mach-omap1/omap1510.h b/arch/arm/mach-omap1/omap1510.h
deleted file mode 100644
index 3d235244bf5c..000000000000
--- a/arch/arm/mach-omap1/omap1510.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * Hardware definitions for TI OMAP1510 processor.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP15XX_H
-#define __ASM_ARCH_OMAP15XX_H
-
-/*
- * ----------------------------------------------------------------------------
- * Base addresses
- * ----------------------------------------------------------------------------
- */
-
-/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-
-#define OMAP1510_DSP_BASE	0xE0000000
-#define OMAP1510_DSP_SIZE	0x28000
-#define OMAP1510_DSP_START	0xE0000000
-
-#define OMAP1510_DSPREG_BASE	0xE1000000
-#define OMAP1510_DSPREG_SIZE	SZ_128K
-#define OMAP1510_DSPREG_START	0xE1000000
-
-#define OMAP1510_DSP_MMU_BASE	(0xfffed200)
-
-/*
- * ---------------------------------------------------------------------------
- *  OMAP-1510 FPGA
- * ---------------------------------------------------------------------------
- */
-#define OMAP1510_FPGA_BASE		0xE8000000		/* VA */
-#define OMAP1510_FPGA_SIZE		SZ_4K
-#define OMAP1510_FPGA_START		0x08000000		/* PA */
-
-/* Revision */
-#define OMAP1510_FPGA_REV_LOW			IOMEM(OMAP1510_FPGA_BASE + 0x0)
-#define OMAP1510_FPGA_REV_HIGH			IOMEM(OMAP1510_FPGA_BASE + 0x1)
-#define OMAP1510_FPGA_LCD_PANEL_CONTROL		IOMEM(OMAP1510_FPGA_BASE + 0x2)
-#define OMAP1510_FPGA_LED_DIGIT			IOMEM(OMAP1510_FPGA_BASE + 0x3)
-#define INNOVATOR_FPGA_HID_SPI			IOMEM(OMAP1510_FPGA_BASE + 0x4)
-#define OMAP1510_FPGA_POWER			IOMEM(OMAP1510_FPGA_BASE + 0x5)
-
-/* Interrupt status */
-#define OMAP1510_FPGA_ISR_LO			IOMEM(OMAP1510_FPGA_BASE + 0x6)
-#define OMAP1510_FPGA_ISR_HI			IOMEM(OMAP1510_FPGA_BASE + 0x7)
-
-/* Interrupt mask */
-#define OMAP1510_FPGA_IMR_LO			IOMEM(OMAP1510_FPGA_BASE + 0x8)
-#define OMAP1510_FPGA_IMR_HI			IOMEM(OMAP1510_FPGA_BASE + 0x9)
-
-/* Reset registers */
-#define OMAP1510_FPGA_HOST_RESET		IOMEM(OMAP1510_FPGA_BASE + 0xa)
-#define OMAP1510_FPGA_RST			IOMEM(OMAP1510_FPGA_BASE + 0xb)
-
-#define OMAP1510_FPGA_AUDIO			IOMEM(OMAP1510_FPGA_BASE + 0xc)
-#define OMAP1510_FPGA_DIP			IOMEM(OMAP1510_FPGA_BASE + 0xe)
-#define OMAP1510_FPGA_FPGA_IO			IOMEM(OMAP1510_FPGA_BASE + 0xf)
-#define OMAP1510_FPGA_UART1			IOMEM(OMAP1510_FPGA_BASE + 0x14)
-#define OMAP1510_FPGA_UART2			IOMEM(OMAP1510_FPGA_BASE + 0x15)
-#define OMAP1510_FPGA_OMAP1510_STATUS		IOMEM(OMAP1510_FPGA_BASE + 0x16)
-#define OMAP1510_FPGA_BOARD_REV			IOMEM(OMAP1510_FPGA_BASE + 0x18)
-#define INNOVATOR_FPGA_CAM_USB_CONTROL		IOMEM(OMAP1510_FPGA_BASE + 0x20c)
-#define OMAP1510P1_PPT_DATA			IOMEM(OMAP1510_FPGA_BASE + 0x100)
-#define OMAP1510P1_PPT_STATUS			IOMEM(OMAP1510_FPGA_BASE + 0x101)
-#define OMAP1510P1_PPT_CONTROL			IOMEM(OMAP1510_FPGA_BASE + 0x102)
-
-#define OMAP1510_FPGA_TOUCHSCREEN		IOMEM(OMAP1510_FPGA_BASE + 0x204)
-
-#define INNOVATOR_FPGA_INFO			IOMEM(OMAP1510_FPGA_BASE + 0x205)
-#define INNOVATOR_FPGA_LCD_BRIGHT_LO		IOMEM(OMAP1510_FPGA_BASE + 0x206)
-#define INNOVATOR_FPGA_LCD_BRIGHT_HI		IOMEM(OMAP1510_FPGA_BASE + 0x207)
-#define INNOVATOR_FPGA_LED_GRN_LO		IOMEM(OMAP1510_FPGA_BASE + 0x208)
-#define INNOVATOR_FPGA_LED_GRN_HI		IOMEM(OMAP1510_FPGA_BASE + 0x209)
-#define INNOVATOR_FPGA_LED_RED_LO		IOMEM(OMAP1510_FPGA_BASE + 0x20a)
-#define INNOVATOR_FPGA_LED_RED_HI		IOMEM(OMAP1510_FPGA_BASE + 0x20b)
-#define INNOVATOR_FPGA_EXP_CONTROL		IOMEM(OMAP1510_FPGA_BASE + 0x20d)
-#define INNOVATOR_FPGA_ISR2			IOMEM(OMAP1510_FPGA_BASE + 0x20e)
-#define INNOVATOR_FPGA_IMR2			IOMEM(OMAP1510_FPGA_BASE + 0x210)
-
-#define OMAP1510_FPGA_ETHR_START		(OMAP1510_FPGA_START + 0x300)
-
-/*
- * Power up Giga UART driver, turn on HID clock.
- * Turn off BT power, since we're not using it and it
- * draws power.
- */
-#define OMAP1510_FPGA_RESET_VALUE		0x42
-
-#define OMAP1510_FPGA_PCR_IF_PD0		(1 << 7)
-#define OMAP1510_FPGA_PCR_COM2_EN		(1 << 6)
-#define OMAP1510_FPGA_PCR_COM1_EN		(1 << 5)
-#define OMAP1510_FPGA_PCR_EXP_PD0		(1 << 4)
-#define OMAP1510_FPGA_PCR_EXP_PD1		(1 << 3)
-#define OMAP1510_FPGA_PCR_48MHZ_CLK		(1 << 2)
-#define OMAP1510_FPGA_PCR_4MHZ_CLK		(1 << 1)
-#define OMAP1510_FPGA_PCR_RSRVD_BIT0		(1 << 0)
-
-/*
- * Innovator/OMAP1510 FPGA HID register bit definitions
- */
-#define OMAP1510_FPGA_HID_SCLK	(1<<0)	/* output */
-#define OMAP1510_FPGA_HID_MOSI	(1<<1)	/* output */
-#define OMAP1510_FPGA_HID_nSS	(1<<2)	/* output 0/1 chip idle/select */
-#define OMAP1510_FPGA_HID_nHSUS	(1<<3)	/* output 0/1 host active/suspended */
-#define OMAP1510_FPGA_HID_MISO	(1<<4)	/* input */
-#define OMAP1510_FPGA_HID_ATN	(1<<5)	/* input  0/1 chip idle/ATN */
-#define OMAP1510_FPGA_HID_rsrvd	(1<<6)
-#define OMAP1510_FPGA_HID_RESETn (1<<7)	/* output - 0/1 USAR reset/run */
-
-/* The FPGA IRQ is cascaded through GPIO_13 */
-#define OMAP1510_INT_FPGA		(IH_GPIO_BASE + 13)
-
-/* IRQ Numbers for interrupts muxed through the FPGA */
-#define OMAP1510_INT_FPGA_ATN		(OMAP_FPGA_IRQ_BASE + 0)
-#define OMAP1510_INT_FPGA_ACK		(OMAP_FPGA_IRQ_BASE + 1)
-#define OMAP1510_INT_FPGA2		(OMAP_FPGA_IRQ_BASE + 2)
-#define OMAP1510_INT_FPGA3		(OMAP_FPGA_IRQ_BASE + 3)
-#define OMAP1510_INT_FPGA4		(OMAP_FPGA_IRQ_BASE + 4)
-#define OMAP1510_INT_FPGA5		(OMAP_FPGA_IRQ_BASE + 5)
-#define OMAP1510_INT_FPGA6		(OMAP_FPGA_IRQ_BASE + 6)
-#define OMAP1510_INT_FPGA7		(OMAP_FPGA_IRQ_BASE + 7)
-#define OMAP1510_INT_FPGA8		(OMAP_FPGA_IRQ_BASE + 8)
-#define OMAP1510_INT_FPGA9		(OMAP_FPGA_IRQ_BASE + 9)
-#define OMAP1510_INT_FPGA10		(OMAP_FPGA_IRQ_BASE + 10)
-#define OMAP1510_INT_FPGA11		(OMAP_FPGA_IRQ_BASE + 11)
-#define OMAP1510_INT_FPGA12		(OMAP_FPGA_IRQ_BASE + 12)
-#define OMAP1510_INT_ETHER		(OMAP_FPGA_IRQ_BASE + 13)
-#define OMAP1510_INT_FPGAUART1		(OMAP_FPGA_IRQ_BASE + 14)
-#define OMAP1510_INT_FPGAUART2		(OMAP_FPGA_IRQ_BASE + 15)
-#define OMAP1510_INT_FPGA_TS		(OMAP_FPGA_IRQ_BASE + 16)
-#define OMAP1510_INT_FPGA17		(OMAP_FPGA_IRQ_BASE + 17)
-#define OMAP1510_INT_FPGA_CAM		(OMAP_FPGA_IRQ_BASE + 18)
-#define OMAP1510_INT_FPGA_RTC_A		(OMAP_FPGA_IRQ_BASE + 19)
-#define OMAP1510_INT_FPGA_RTC_B		(OMAP_FPGA_IRQ_BASE + 20)
-#define OMAP1510_INT_FPGA_CD		(OMAP_FPGA_IRQ_BASE + 21)
-#define OMAP1510_INT_FPGA22		(OMAP_FPGA_IRQ_BASE + 22)
-#define OMAP1510_INT_FPGA23		(OMAP_FPGA_IRQ_BASE + 23)
-
-#endif /*  __ASM_ARCH_OMAP15XX_H */
-
diff --git a/arch/arm/mach-omap1/omap16xx.h b/arch/arm/mach-omap1/omap16xx.h
deleted file mode 100644
index cd1c724869c7..000000000000
--- a/arch/arm/mach-omap1/omap16xx.h
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * Hardware definitions for TI OMAP1610/5912/1710 processors.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP16XX_H
-#define __ASM_ARCH_OMAP16XX_H
-
-/*
- * ----------------------------------------------------------------------------
- * Base addresses
- * ----------------------------------------------------------------------------
- */
-
-/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-
-#define OMAP16XX_DSP_BASE	0xE0000000
-#define OMAP16XX_DSP_SIZE	0x28000
-#define OMAP16XX_DSP_START	0xE0000000
-
-#define OMAP16XX_DSPREG_BASE	0xE1000000
-#define OMAP16XX_DSPREG_SIZE	SZ_128K
-#define OMAP16XX_DSPREG_START	0xE1000000
-
-#define OMAP16XX_SEC_BASE	0xFFFE4000
-#define OMAP16XX_SEC_DES	(OMAP16XX_SEC_BASE + 0x0000)
-#define OMAP16XX_SEC_SHA1MD5	(OMAP16XX_SEC_BASE + 0x0800)
-#define OMAP16XX_SEC_RNG	(OMAP16XX_SEC_BASE + 0x1000)
-
-/*
- * ---------------------------------------------------------------------------
- * Interrupts
- * ---------------------------------------------------------------------------
- */
-#define OMAP_IH2_0_BASE		(0xfffe0000)
-#define OMAP_IH2_1_BASE		(0xfffe0100)
-#define OMAP_IH2_2_BASE		(0xfffe0200)
-#define OMAP_IH2_3_BASE		(0xfffe0300)
-
-#define OMAP_IH2_0_ITR		(OMAP_IH2_0_BASE + 0x00)
-#define OMAP_IH2_0_MIR		(OMAP_IH2_0_BASE + 0x04)
-#define OMAP_IH2_0_SIR_IRQ	(OMAP_IH2_0_BASE + 0x10)
-#define OMAP_IH2_0_SIR_FIQ	(OMAP_IH2_0_BASE + 0x14)
-#define OMAP_IH2_0_CONTROL	(OMAP_IH2_0_BASE + 0x18)
-#define OMAP_IH2_0_ILR0		(OMAP_IH2_0_BASE + 0x1c)
-#define OMAP_IH2_0_ISR		(OMAP_IH2_0_BASE + 0x9c)
-
-#define OMAP_IH2_1_ITR		(OMAP_IH2_1_BASE + 0x00)
-#define OMAP_IH2_1_MIR		(OMAP_IH2_1_BASE + 0x04)
-#define OMAP_IH2_1_SIR_IRQ	(OMAP_IH2_1_BASE + 0x10)
-#define OMAP_IH2_1_SIR_FIQ	(OMAP_IH2_1_BASE + 0x14)
-#define OMAP_IH2_1_CONTROL	(OMAP_IH2_1_BASE + 0x18)
-#define OMAP_IH2_1_ILR1		(OMAP_IH2_1_BASE + 0x1c)
-#define OMAP_IH2_1_ISR		(OMAP_IH2_1_BASE + 0x9c)
-
-#define OMAP_IH2_2_ITR		(OMAP_IH2_2_BASE + 0x00)
-#define OMAP_IH2_2_MIR		(OMAP_IH2_2_BASE + 0x04)
-#define OMAP_IH2_2_SIR_IRQ	(OMAP_IH2_2_BASE + 0x10)
-#define OMAP_IH2_2_SIR_FIQ	(OMAP_IH2_2_BASE + 0x14)
-#define OMAP_IH2_2_CONTROL	(OMAP_IH2_2_BASE + 0x18)
-#define OMAP_IH2_2_ILR2		(OMAP_IH2_2_BASE + 0x1c)
-#define OMAP_IH2_2_ISR		(OMAP_IH2_2_BASE + 0x9c)
-
-#define OMAP_IH2_3_ITR		(OMAP_IH2_3_BASE + 0x00)
-#define OMAP_IH2_3_MIR		(OMAP_IH2_3_BASE + 0x04)
-#define OMAP_IH2_3_SIR_IRQ	(OMAP_IH2_3_BASE + 0x10)
-#define OMAP_IH2_3_SIR_FIQ	(OMAP_IH2_3_BASE + 0x14)
-#define OMAP_IH2_3_CONTROL	(OMAP_IH2_3_BASE + 0x18)
-#define OMAP_IH2_3_ILR3		(OMAP_IH2_3_BASE + 0x1c)
-#define OMAP_IH2_3_ISR		(OMAP_IH2_3_BASE + 0x9c)
-
-/*
- * ----------------------------------------------------------------------------
- * Clocks
- * ----------------------------------------------------------------------------
- */
-#define OMAP16XX_ARM_IDLECT3	(CLKGEN_REG_BASE + 0x24)
-
-/*
- * ----------------------------------------------------------------------------
- * Pin configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV6	(1 << 8)
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV7	(1 << 9)
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV8	(1 << 10)
-#define OMAP16XX_CONF_VOLTAGE_VDDSHV9	(1 << 11)
-#define OMAP16XX_SUBLVDS_CONF_VALID	(1 << 13)
-
-/*
- * ----------------------------------------------------------------------------
- * System control registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP1610_RESET_CONTROL  0xfffe1140
-
-/*
- * ---------------------------------------------------------------------------
- * TIPB bus interface
- * ---------------------------------------------------------------------------
- */
-#define TIPB_SWITCH_BASE		 (0xfffbc800)
-#define OMAP16XX_MMCSD2_SSW_MPU_CONF	(TIPB_SWITCH_BASE + 0x160)
-
-/* UART3 Registers Mapping through MPU bus */
-#define UART3_RHR               (OMAP1_UART3_BASE + 0)
-#define UART3_THR               (OMAP1_UART3_BASE + 0)
-#define UART3_DLL               (OMAP1_UART3_BASE + 0)
-#define UART3_IER               (OMAP1_UART3_BASE + 4)
-#define UART3_DLH               (OMAP1_UART3_BASE + 4)
-#define UART3_IIR               (OMAP1_UART3_BASE + 8)
-#define UART3_FCR               (OMAP1_UART3_BASE + 8)
-#define UART3_EFR               (OMAP1_UART3_BASE + 8)
-#define UART3_LCR               (OMAP1_UART3_BASE + 0x0C)
-#define UART3_MCR               (OMAP1_UART3_BASE + 0x10)
-#define UART3_XON1_ADDR1        (OMAP1_UART3_BASE + 0x10)
-#define UART3_XON2_ADDR2        (OMAP1_UART3_BASE + 0x14)
-#define UART3_LSR               (OMAP1_UART3_BASE + 0x14)
-#define UART3_TCR               (OMAP1_UART3_BASE + 0x18)
-#define UART3_MSR               (OMAP1_UART3_BASE + 0x18)
-#define UART3_XOFF1             (OMAP1_UART3_BASE + 0x18)
-#define UART3_XOFF2             (OMAP1_UART3_BASE + 0x1C)
-#define UART3_SPR               (OMAP1_UART3_BASE + 0x1C)
-#define UART3_TLR               (OMAP1_UART3_BASE + 0x1C)
-#define UART3_MDR1              (OMAP1_UART3_BASE + 0x20)
-#define UART3_MDR2              (OMAP1_UART3_BASE + 0x24)
-#define UART3_SFLSR             (OMAP1_UART3_BASE + 0x28)
-#define UART3_TXFLL             (OMAP1_UART3_BASE + 0x28)
-#define UART3_RESUME            (OMAP1_UART3_BASE + 0x2C)
-#define UART3_TXFLH             (OMAP1_UART3_BASE + 0x2C)
-#define UART3_SFREGL            (OMAP1_UART3_BASE + 0x30)
-#define UART3_RXFLL             (OMAP1_UART3_BASE + 0x30)
-#define UART3_SFREGH            (OMAP1_UART3_BASE + 0x34)
-#define UART3_RXFLH             (OMAP1_UART3_BASE + 0x34)
-#define UART3_BLR               (OMAP1_UART3_BASE + 0x38)
-#define UART3_ACREG             (OMAP1_UART3_BASE + 0x3C)
-#define UART3_DIV16             (OMAP1_UART3_BASE + 0x3C)
-#define UART3_SCR               (OMAP1_UART3_BASE + 0x40)
-#define UART3_SSR               (OMAP1_UART3_BASE + 0x44)
-#define UART3_EBLR              (OMAP1_UART3_BASE + 0x48)
-#define UART3_OSC_12M_SEL       (OMAP1_UART3_BASE + 0x4C)
-#define UART3_MVR               (OMAP1_UART3_BASE + 0x50)
-
-/*
- * ---------------------------------------------------------------------------
- * Watchdog timer
- * ---------------------------------------------------------------------------
- */
-
-/* 32-bit Watchdog timer in OMAP 16XX */
-#define OMAP_16XX_WATCHDOG_BASE        (0xfffeb000)
-#define OMAP_16XX_WIDR         (OMAP_16XX_WATCHDOG_BASE + 0x00)
-#define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10)
-#define OMAP_16XX_WD_SYSSTATUS (OMAP_16XX_WATCHDOG_BASE + 0x14)
-#define OMAP_16XX_WCLR         (OMAP_16XX_WATCHDOG_BASE + 0x24)
-#define OMAP_16XX_WCRR         (OMAP_16XX_WATCHDOG_BASE + 0x28)
-#define OMAP_16XX_WLDR         (OMAP_16XX_WATCHDOG_BASE + 0x2c)
-#define OMAP_16XX_WTGR         (OMAP_16XX_WATCHDOG_BASE + 0x30)
-#define OMAP_16XX_WWPS         (OMAP_16XX_WATCHDOG_BASE + 0x34)
-#define OMAP_16XX_WSPR         (OMAP_16XX_WATCHDOG_BASE + 0x48)
-
-#define WCLR_PRE_SHIFT         5
-#define WCLR_PTV_SHIFT         2
-
-#define WWPS_W_PEND_WSPR       (1 << 4)
-#define WWPS_W_PEND_WTGR       (1 << 3)
-#define WWPS_W_PEND_WLDR       (1 << 2)
-#define WWPS_W_PEND_WCRR       (1 << 1)
-#define WWPS_W_PEND_WCLR       (1 << 0)
-
-#define WSPR_ENABLE_0          (0x0000bbbb)
-#define WSPR_ENABLE_1          (0x00004444)
-#define WSPR_DISABLE_0         (0x0000aaaa)
-#define WSPR_DISABLE_1         (0x00005555)
-
-#define OMAP16XX_DSP_MMU_BASE	(0xfffed200)
-#define OMAP16XX_MAILBOX_BASE	(0xfffcf000)
-
-#endif /*  __ASM_ARCH_OMAP16XX_H */
-
diff --git a/arch/arm/mach-omap1/omap7xx.h b/arch/arm/mach-omap1/omap7xx.h
deleted file mode 100644
index 63da994bc609..000000000000
--- a/arch/arm/mach-omap1/omap7xx.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * Hardware definitions for TI OMAP7XX processor.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- * Adapted for omap850 by Zebediah C. McClure <zmc@lurian.net>
- * Adapted for omap7xx by Alistair Buxton <a.j.buxton@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP7XX_H
-#define __ASM_ARCH_OMAP7XX_H
-
-/*
- * ----------------------------------------------------------------------------
- * Base addresses
- * ----------------------------------------------------------------------------
- */
-
-/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-
-#define OMAP7XX_DSP_BASE	0xE0000000
-#define OMAP7XX_DSP_SIZE	0x50000
-#define OMAP7XX_DSP_START	0xE0000000
-
-#define OMAP7XX_DSPREG_BASE	0xE1000000
-#define OMAP7XX_DSPREG_SIZE	SZ_128K
-#define OMAP7XX_DSPREG_START	0xE1000000
-
-#define OMAP7XX_SPI1_BASE	0xfffc0800
-#define OMAP7XX_SPI2_BASE	0xfffc1000
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP7XX specific configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP7XX_CONFIG_BASE	0xfffe1000
-#define OMAP7XX_IO_CONF_0	0xfffe1070
-#define OMAP7XX_IO_CONF_1	0xfffe1074
-#define OMAP7XX_IO_CONF_2	0xfffe1078
-#define OMAP7XX_IO_CONF_3	0xfffe107c
-#define OMAP7XX_IO_CONF_4	0xfffe1080
-#define OMAP7XX_IO_CONF_5	0xfffe1084
-#define OMAP7XX_IO_CONF_6	0xfffe1088
-#define OMAP7XX_IO_CONF_7	0xfffe108c
-#define OMAP7XX_IO_CONF_8	0xfffe1090
-#define OMAP7XX_IO_CONF_9	0xfffe1094
-#define OMAP7XX_IO_CONF_10	0xfffe1098
-#define OMAP7XX_IO_CONF_11	0xfffe109c
-#define OMAP7XX_IO_CONF_12	0xfffe10a0
-#define OMAP7XX_IO_CONF_13	0xfffe10a4
-
-#define OMAP7XX_MODE_1		0xfffe1010
-#define OMAP7XX_MODE_2		0xfffe1014
-
-/* CSMI specials: in terms of base + offset */
-#define OMAP7XX_MODE2_OFFSET	0x14
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP7XX traffic controller configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP7XX_FLASH_CFG_0	0xfffecc10
-#define OMAP7XX_FLASH_ACFG_0	0xfffecc50
-#define OMAP7XX_FLASH_CFG_1	0xfffecc14
-#define OMAP7XX_FLASH_ACFG_1	0xfffecc54
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP7XX DSP control registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP7XX_ICR_BASE	0xfffbb800
-#define OMAP7XX_DSP_M_CTL	0xfffbb804
-#define OMAP7XX_DSP_MMU_BASE	0xfffed200
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP7XX PCC_UPLD configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP7XX_PCC_UPLD_CTRL_BASE	(0xfffe0900)
-#define OMAP7XX_PCC_UPLD_CTRL		(OMAP7XX_PCC_UPLD_CTRL_BASE + 0x00)
-
-#endif /*  __ASM_ARCH_OMAP7XX_H */
-
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index fce7d2b572bf..9761d8404949 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -69,7 +69,6 @@
 static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
 static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
 static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
-static unsigned int mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_SIZE];
 static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
 static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
 
@@ -166,10 +165,7 @@ static void omap_pm_wakeup_setup(void)
 	 * drivers must still separately call omap_set_gpio_wakeup() to
 	 * wake up to a GPIO interrupt.
 	 */
-	if (cpu_is_omap7xx())
-		level1_wake = OMAP_IRQ_BIT(INT_7XX_GPIO_BANK1) |
-			OMAP_IRQ_BIT(INT_7XX_IH2_IRQ);
-	else if (cpu_is_omap15xx())
+	if (cpu_is_omap15xx())
 		level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
 			OMAP_IRQ_BIT(INT_1510_IH2_IRQ);
 	else if (cpu_is_omap16xx())
@@ -178,12 +174,7 @@ static void omap_pm_wakeup_setup(void)
 
 	omap_writel(~level1_wake, OMAP_IH1_MIR);
 
-	if (cpu_is_omap7xx()) {
-		omap_writel(~level2_wake, OMAP_IH2_0_MIR);
-		omap_writel(~(OMAP_IRQ_BIT(INT_7XX_WAKE_UP_REQ) |
-				OMAP_IRQ_BIT(INT_7XX_MPUIO_KEYPAD)),
-				OMAP_IH2_1_MIR);
-	} else if (cpu_is_omap15xx()) {
+	if (cpu_is_omap15xx()) {
 		level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
 		omap_writel(~level2_wake,  OMAP_IH2_MIR);
 	} else if (cpu_is_omap16xx()) {
@@ -236,17 +227,7 @@ void omap1_pm_suspend(void)
 	 * Save interrupt, MPUI, ARM and UPLD control registers.
 	 */
 
-	if (cpu_is_omap7xx()) {
-		MPUI7XX_SAVE(OMAP_IH1_MIR);
-		MPUI7XX_SAVE(OMAP_IH2_0_MIR);
-		MPUI7XX_SAVE(OMAP_IH2_1_MIR);
-		MPUI7XX_SAVE(MPUI_CTRL);
-		MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG);
-		MPUI7XX_SAVE(MPUI_DSP_API_CONFIG);
-		MPUI7XX_SAVE(EMIFS_CONFIG);
-		MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG);
-
-	} else if (cpu_is_omap15xx()) {
+	if (cpu_is_omap15xx()) {
 		MPUI1510_SAVE(OMAP_IH1_MIR);
 		MPUI1510_SAVE(OMAP_IH2_MIR);
 		MPUI1510_SAVE(MPUI_CTRL);
@@ -288,9 +269,8 @@ void omap1_pm_suspend(void)
 	/* stop DSP */
 	omap_writew(omap_readw(ARM_RSTCT1) & ~(1 << DSP_EN), ARM_RSTCT1);
 
-		/* shut down dsp_ck */
-	if (!cpu_is_omap7xx())
-		omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL);
+	/* shut down dsp_ck */
+	omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL);
 
 	/* temporarily enabling api_ck to access DSP registers */
 	omap_writew(omap_readw(ARM_IDLECT2) | 1 << EN_APICK, ARM_IDLECT2);
@@ -366,13 +346,7 @@ void omap1_pm_suspend(void)
 	ULPD_RESTORE(ULPD_CLOCK_CTRL);
 	ULPD_RESTORE(ULPD_STATUS_REQ);
 
-	if (cpu_is_omap7xx()) {
-		MPUI7XX_RESTORE(EMIFS_CONFIG);
-		MPUI7XX_RESTORE(EMIFF_SDRAM_CONFIG);
-		MPUI7XX_RESTORE(OMAP_IH1_MIR);
-		MPUI7XX_RESTORE(OMAP_IH2_0_MIR);
-		MPUI7XX_RESTORE(OMAP_IH2_1_MIR);
-	} else if (cpu_is_omap15xx()) {
+	if (cpu_is_omap15xx()) {
 		MPUI1510_RESTORE(MPUI_CTRL);
 		MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG);
 		MPUI1510_RESTORE(MPUI_DSP_API_CONFIG);
@@ -433,14 +407,7 @@ static int omap_pm_debug_show(struct seq_file *m, void *v)
 	ULPD_SAVE(ULPD_DPLL_CTRL);
 	ULPD_SAVE(ULPD_POWER_CTRL);
 
-	if (cpu_is_omap7xx()) {
-		MPUI7XX_SAVE(MPUI_CTRL);
-		MPUI7XX_SAVE(MPUI_DSP_STATUS);
-		MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG);
-		MPUI7XX_SAVE(MPUI_DSP_API_CONFIG);
-		MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG);
-		MPUI7XX_SAVE(EMIFS_CONFIG);
-	} else if (cpu_is_omap15xx()) {
+	if (cpu_is_omap15xx()) {
 		MPUI1510_SAVE(MPUI_CTRL);
 		MPUI1510_SAVE(MPUI_DSP_STATUS);
 		MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG);
@@ -486,21 +453,7 @@ static int omap_pm_debug_show(struct seq_file *m, void *v)
 		   ULPD_SHOW(ULPD_STATUS_REQ),
 		   ULPD_SHOW(ULPD_POWER_CTRL));
 
-	if (cpu_is_omap7xx()) {
-		seq_printf(m,
-			   "MPUI7XX_CTRL_REG	     0x%-8x \n"
-			   "MPUI7XX_DSP_STATUS_REG:      0x%-8x \n"
-			   "MPUI7XX_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
-			   "MPUI7XX_DSP_API_CONFIG_REG:  0x%-8x \n"
-			   "MPUI7XX_SDRAM_CONFIG_REG:    0x%-8x \n"
-			   "MPUI7XX_EMIFS_CONFIG_REG:    0x%-8x \n",
-			   MPUI7XX_SHOW(MPUI_CTRL),
-			   MPUI7XX_SHOW(MPUI_DSP_STATUS),
-			   MPUI7XX_SHOW(MPUI_DSP_BOOT_CONFIG),
-			   MPUI7XX_SHOW(MPUI_DSP_API_CONFIG),
-			   MPUI7XX_SHOW(EMIFF_SDRAM_CONFIG),
-			   MPUI7XX_SHOW(EMIFS_CONFIG));
-	} else if (cpu_is_omap15xx()) {
+	if (cpu_is_omap15xx()) {
 		seq_printf(m,
 			   "MPUI1510_CTRL_REG             0x%-8x \n"
 			   "MPUI1510_DSP_STATUS_REG:      0x%-8x \n"
@@ -634,10 +587,7 @@ static int __init omap_pm_init(void)
 	 * These routines need to be in SRAM as that's the only
 	 * memory the MPU can see when it wakes up.
 	 */
-	if (cpu_is_omap7xx()) {
-		omap_sram_suspend = omap_sram_push(omap7xx_cpu_suspend,
-						   omap7xx_cpu_suspend_sz);
-	} else if (cpu_is_omap15xx()) {
+	if (cpu_is_omap15xx()) {
 		omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend,
 						   omap1510_cpu_suspend_sz);
 	} else if (cpu_is_omap16xx()) {
@@ -652,9 +602,7 @@ static int __init omap_pm_init(void)
 
 	arm_pm_idle = omap1_pm_idle;
 
-	if (cpu_is_omap7xx())
-		irq = INT_7XX_WAKE_UP_REQ;
-	else if (cpu_is_omap16xx())
+	if (cpu_is_omap16xx())
 		irq = INT_1610_WAKE_UP_REQ;
 	else
 		irq = -1;
@@ -673,9 +621,7 @@ static int __init omap_pm_init(void)
 	omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL);
 
 	/* Configure IDLECT3 */
-	if (cpu_is_omap7xx())
-		omap_writel(OMAP7XX_IDLECT3_VAL, OMAP7XX_IDLECT3);
-	else if (cpu_is_omap16xx())
+	if (cpu_is_omap16xx())
 		omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3);
 
 	suspend_set_ops(&omap_pm_ops);
diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h
index 0d1f092821ff..d4373a5c4697 100644
--- a/arch/arm/mach-omap1/pm.h
+++ b/arch/arm/mach-omap1/pm.h
@@ -100,12 +100,6 @@
 #define OMAP1610_IDLECT3		0xfffece24
 #define OMAP1610_IDLE_LOOP_REQUEST	0x0400
 
-#define OMAP7XX_IDLECT1_SLEEP_VAL	0x16c7
-#define OMAP7XX_IDLECT2_SLEEP_VAL	0x09c7
-#define OMAP7XX_IDLECT3_VAL		0x3f
-#define OMAP7XX_IDLECT3		0xfffece24
-#define OMAP7XX_IDLE_LOOP_REQUEST	0x0C00
-
 #ifndef __ASSEMBLER__
 
 #include <linux/clk.h>
@@ -118,17 +112,13 @@ extern void allow_idle_sleep(void);
 extern void omap1_pm_idle(void);
 extern void omap1_pm_suspend(void);
 
-extern void omap7xx_cpu_suspend(unsigned long, unsigned long);
 extern void omap1510_cpu_suspend(unsigned long, unsigned long);
 extern void omap1610_cpu_suspend(unsigned long, unsigned long);
-extern void omap7xx_idle_loop_suspend(void);
 extern void omap1510_idle_loop_suspend(void);
 extern void omap1610_idle_loop_suspend(void);
 
-extern unsigned int omap7xx_cpu_suspend_sz;
 extern unsigned int omap1510_cpu_suspend_sz;
 extern unsigned int omap1610_cpu_suspend_sz;
-extern unsigned int omap7xx_idle_loop_suspend_sz;
 extern unsigned int omap1510_idle_loop_suspend_sz;
 extern unsigned int omap1610_idle_loop_suspend_sz;
 
@@ -151,10 +141,6 @@ extern void omap_serial_wake_trigger(int enable);
 #define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x))
 #define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]
 
-#define MPUI7XX_SAVE(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x] = omap_readl(x)
-#define MPUI7XX_RESTORE(x) omap_writel((mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x]), (x))
-#define MPUI7XX_SHOW(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x]
-
 #define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x)
 #define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x))
 #define MPUI1510_SHOW(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]
@@ -228,27 +214,6 @@ enum mpui1510_save_state {
 #endif
 };
 
-enum mpui7xx_save_state {
-	MPUI7XX_SLEEP_SAVE_START = 0,
-	/*
-	 * MPUI registers 32 bits
-	 */
-	MPUI7XX_SLEEP_SAVE_MPUI_CTRL,
-	MPUI7XX_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
-	MPUI7XX_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
-	MPUI7XX_SLEEP_SAVE_MPUI_DSP_STATUS,
-	MPUI7XX_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
-	MPUI7XX_SLEEP_SAVE_EMIFS_CONFIG,
-	MPUI7XX_SLEEP_SAVE_OMAP_IH1_MIR,
-	MPUI7XX_SLEEP_SAVE_OMAP_IH2_0_MIR,
-	MPUI7XX_SLEEP_SAVE_OMAP_IH2_1_MIR,
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	MPUI7XX_SLEEP_SAVE_SIZE
-#else
-	MPUI7XX_SLEEP_SAVE_SIZE = 0
-#endif
-};
-
 enum mpui1610_save_state {
 	MPUI1610_SLEEP_SAVE_START = 0,
 	/*
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 88928fc33b2e..c7f590645774 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -106,13 +106,6 @@ void __init omap_serial_init(void)
 {
 	int i;
 
-	if (cpu_is_omap7xx()) {
-		serial_platform_data[0].regshift = 0;
-		serial_platform_data[1].regshift = 0;
-		serial_platform_data[0].irq = INT_7XX_UART_MODEM_1;
-		serial_platform_data[1].irq = INT_7XX_UART_MODEM_IRDA_2;
-	}
-
 	if (cpu_is_omap15xx()) {
 		serial_platform_data[0].uartclk = OMAP1510_BASE_BAUD * 16;
 		serial_platform_data[1].uartclk = OMAP1510_BASE_BAUD * 16;
@@ -120,14 +113,6 @@ void __init omap_serial_init(void)
 	}
 
 	for (i = 0; i < ARRAY_SIZE(serial_platform_data) - 1; i++) {
-
-		/* Don't look at UARTs higher than 2 for omap7xx */
-		if (cpu_is_omap7xx() && i > 1) {
-			serial_platform_data[i].membase = NULL;
-			serial_platform_data[i].mapbase = 0;
-			continue;
-		}
-
 		/* Static mapping, never released */
 		serial_platform_data[i].membase =
 			ioremap(serial_platform_data[i].mapbase, SZ_2K);
diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
index f111b79512ce..6192f52d531a 100644
--- a/arch/arm/mach-omap1/sleep.S
+++ b/arch/arm/mach-omap1/sleep.S
@@ -61,86 +61,6 @@
  *
  */
 
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	.align	3
-ENTRY(omap7xx_cpu_suspend)
-
-	@ save registers on stack
-	stmfd	sp!, {r0 - r12, lr}
-
-	@ Drain write cache
-	mov	r4, #0
-	mcr	p15, 0, r0, c7, c10, 4
-	nop
-
-	@ load base address of Traffic Controller
-	mov	r6, #TCMIF_ASM_BASE & 0xff000000
-	orr	r6, r6, #TCMIF_ASM_BASE & 0x00ff0000
-	orr	r6, r6, #TCMIF_ASM_BASE & 0x0000ff00
-
-	@ prepare to put SDRAM into self-refresh manually
-	ldr	r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
-	orr	r9, r7, #SELF_REFRESH_MODE & 0xff000000
-	orr	r9, r9, #SELF_REFRESH_MODE & 0x000000ff
-	str	r9, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
-
-	@ prepare to put EMIFS to Sleep
-	ldr	r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
-	orr	r9, r8, #IDLE_EMIFS_REQUEST & 0xff
-	str	r9, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
-
-	@ load base address of ARM_IDLECT1 and ARM_IDLECT2
-	mov	r4, #CLKGEN_REG_ASM_BASE & 0xff000000
-	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000
-	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00
-
-	@ turn off clock domains
-	@ do not disable PERCK (0x04)
-	mov	r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff
-	orr	r5, r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff00
-	strh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
-
-	@ request ARM idle
-	mov	r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff
-	orr	r3, r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff00
-	strh	r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
-
-	@ disable instruction cache
-	mrc	p15, 0, r9, c1, c0, 0
-	bic	r2, r9, #0x1000
-	mcr	p15, 0, r2, c1, c0, 0
-	nop
-
-/*
- * Let's wait for the next wake up event to wake us up. r0 can't be
- * used here because r0 holds ARM_IDLECT1
- */
-	mov	r2, #0
-	mcr	p15, 0, r2, c7, c0, 4		@ wait for interrupt
-/*
- * omap7xx_cpu_suspend()'s resume point.
- *
- * It will just start executing here, so we'll restore stuff from the
- * stack.
- */
-	@ re-enable Icache
-	mcr	p15, 0, r9, c1, c0, 0
-
-	@ reset the ARM_IDLECT1 and ARM_IDLECT2.
-	strh	r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
-	strh	r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
-
-	@ Restore EMIFF controls
-	str	r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
-	str	r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
-
-	@ restore regs and return
-	ldmfd	sp!, {r0 - r12, pc}
-
-ENTRY(omap7xx_cpu_suspend_sz)
-	.word	. - omap7xx_cpu_suspend
-#endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */
-
 #ifdef CONFIG_ARCH_OMAP15XX
 	.align	3
 ENTRY(omap1510_cpu_suspend)
diff --git a/arch/arm/mach-omap1/sram-init.c b/arch/arm/mach-omap1/sram-init.c
index dabf0c4defeb..26427d6be896 100644
--- a/arch/arm/mach-omap1/sram-init.c
+++ b/arch/arm/mach-omap1/sram-init.c
@@ -94,9 +94,7 @@ static void __init omap_detect_and_map_sram(void)
 	omap_sram_skip = SRAM_BOOTLOADER_SZ;
 	omap_sram_start = OMAP1_SRAM_PA;
 
-	if (cpu_is_omap7xx())
-		omap_sram_size = 0x32000;	/* 200K */
-	else if (cpu_is_omap15xx())
+	if (cpu_is_omap15xx())
 		omap_sram_size = 0x30000;	/* 192K */
 	else if (cpu_is_omap1610() || cpu_is_omap1611() ||
 			cpu_is_omap1621() || cpu_is_omap1710())
@@ -133,9 +131,6 @@ static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
 void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
 {
 	BUG_ON(!_omap_sram_reprogram_clock);
-	/* On 730, bit 13 must always be 1 */
-	if (cpu_is_omap7xx())
-		ckctl |= 0x2000;
 	_omap_sram_reprogram_clock(dpllctl, ckctl);
 }
 
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
index 0119f3ddb7a6..08d42abc4a0f 100644
--- a/arch/arm/mach-omap1/usb.c
+++ b/arch/arm/mach-omap1/usb.c
@@ -190,12 +190,6 @@ static struct platform_device udc_device = {
 
 static inline void udc_device_init(struct omap_usb_config *pdata)
 {
-	/* IRQ numbers for omap7xx */
-	if(cpu_is_omap7xx()) {
-		udc_resources[1].start = INT_7XX_USB_GENI;
-		udc_resources[2].start = INT_7XX_USB_NON_ISO;
-		udc_resources[3].start = INT_7XX_USB_ISO;
-	}
 	pdata->udc_device = &udc_device;
 }
 
@@ -238,8 +232,6 @@ static inline void ohci_device_init(struct omap_usb_config *pdata)
 	if (!IS_ENABLED(CONFIG_USB_OHCI_HCD))
 		return;
 
-	if (cpu_is_omap7xx())
-		ohci_resources[1].start = INT_7XX_USB_HHC_1;
 	pdata->ohci_device = &ohci_device;
 	pdata->ocpi_enable = &ocpi_enable;
 }
@@ -267,8 +259,6 @@ static struct platform_device otg_device = {
 
 static inline void otg_device_init(struct omap_usb_config *pdata)
 {
-	if (cpu_is_omap7xx())
-		otg_resources[1].start = INT_7XX_USB_OTG;
 	pdata->otg_device = &otg_device;
 }
 
@@ -297,14 +287,7 @@ static u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device)
 	}
 
 	if (is_device) {
-		if (cpu_is_omap7xx()) {
-			omap_cfg_reg(AA17_7XX_USB_DM);
-			omap_cfg_reg(W16_7XX_USB_PU_EN);
-			omap_cfg_reg(W17_7XX_USB_VBUSI);
-			omap_cfg_reg(W18_7XX_USB_DMCK_OUT);
-			omap_cfg_reg(W19_7XX_USB_DCRST);
-		} else
-			omap_cfg_reg(W4_USB_PUEN);
+		omap_cfg_reg(W4_USB_PUEN);
 	}
 
 	if (nwires == 2) {
@@ -324,14 +307,11 @@ static u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device)
 		 *  - OTG support on this port not yet written
 		 */
 
-		/* Don't do this for omap7xx -- it causes USB to not work correctly */
-		if (!cpu_is_omap7xx()) {
-			l = omap_readl(USB_TRANSCEIVER_CTRL);
-			l &= ~(7 << 4);
-			if (!is_device)
-				l |= (3 << 1);
-			omap_writel(l, USB_TRANSCEIVER_CTRL);
-		}
+		l = omap_readl(USB_TRANSCEIVER_CTRL);
+		l &= ~(7 << 4);
+		if (!is_device)
+			l |= (3 << 1);
+		omap_writel(l, USB_TRANSCEIVER_CTRL);
 
 		return 3 << 16;
 	}
@@ -698,7 +678,7 @@ void __init omap1_usb_init(struct omap_usb_config *_pdata)
 	ohci_device_init(pdata);
 	otg_device_init(pdata);
 
-	if (cpu_is_omap7xx() || cpu_is_omap16xx())
+	if (cpu_is_omap16xx())
 		omap_otg_init(pdata);
 	else if (cpu_is_omap15xx())
 		omap_1510_usb_init(pdata);
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 0044b2823710..ee449ca032d2 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -28,22 +28,6 @@ config ARCH_ORION5X_DT
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell Orion5x using flattened device tree.
 
-config MACH_DB88F5281
-	bool "Marvell Orion-2 Development Board"
-	select I2C_BOARDINFO if I2C
-	depends on ATAGS && UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell Orion-2 (88F5281) Development Board
-
-config MACH_RD88F5182
-	bool "Marvell Orion-NAS Reference Design"
-	select I2C_BOARDINFO if I2C
-	depends on ATAGS && UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell Orion-NAS (88F5182) RD2
-
 config MACH_RD88F5182_DT
 	bool "Marvell Orion-NAS Reference Design (Flattened Device Tree)"
 	select ARCH_ORION5X_DT
@@ -98,14 +82,6 @@ config MACH_LINKSTATION_MINI
 	  Say 'Y' here if you want your kernel to support the
 	  Buffalo Linkstation Mini (LS-WSGL) platform.
 
-config MACH_LINKSTATION_LS_HGL
-	bool "Buffalo Linkstation LS-HGL"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select I2C_BOARDINFO if I2C
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Buffalo Linkstation LS-HGL platform.
-
 config MACH_TS409
 	bool "QNAP TS-409"
 	depends on ATAGS
@@ -113,13 +89,6 @@ config MACH_TS409
 	  Say 'Y' here if you want your kernel to support the
 	  QNAP TS-409 platform.
 
-config MACH_WRT350N_V2
-	bool "Linksys WRT350N v2"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Linksys WRT350N v2 platform.
-
 config MACH_TS78XX
 	bool "Technologic Systems TS-78xx"
 	depends on ATAGS
@@ -156,32 +125,4 @@ config MACH_MSS2_DT
 	  Say 'Y' here if you want your kernel to support the
 	  Maxtor Shared Storage II platform.
 
-config MACH_WNR854T
-	bool "Netgear WNR854T"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Netgear WNR854T platform.
-
-config MACH_RD88F5181L_GE
-	bool "Marvell Orion-VoIP GE Reference Design"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell Orion-VoIP GE (88F5181L) RD.
-
-config MACH_RD88F5181L_FXO
-	bool "Marvell Orion-VoIP FXO Reference Design"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell Orion-VoIP FXO (88F5181L) RD.
-
-config MACH_RD88F6183AP_GE
-	bool "Marvell Orion-1-90 AP GE Reference Design"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell Orion-1-90 (88F6183) AP GE RD.
-
 endif
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index 572c3520f7fe..6f54d7fef27a 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -2,23 +2,15 @@
 ccflags-y := -I$(srctree)/arch/arm/plat-orion/include
 
 obj-y				+= common.o pci.o irq.o mpp.o
-obj-$(CONFIG_MACH_DB88F5281)	+= db88f5281-setup.o
-obj-$(CONFIG_MACH_RD88F5182)	+= rd88f5182-setup.o
 obj-$(CONFIG_MACH_KUROBOX_PRO)	+= kurobox_pro-setup.o
 obj-$(CONFIG_MACH_TERASTATION_PRO2)	+= terastation_pro2-setup.o
 obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
-obj-$(CONFIG_MACH_LINKSTATION_LS_HGL) += ls_hgl-setup.o
 obj-$(CONFIG_MACH_DNS323)	+= dns323-setup.o
 obj-$(CONFIG_MACH_TS209)	+= ts209-setup.o tsx09-common.o
 obj-$(CONFIG_MACH_TS409)	+= ts409-setup.o tsx09-common.o
-obj-$(CONFIG_MACH_WRT350N_V2)	+= wrt350n-v2-setup.o
 obj-$(CONFIG_MACH_TS78XX)	+= ts78xx-setup.o
 obj-$(CONFIG_MACH_MV2120)	+= mv2120-setup.o
 obj-$(CONFIG_MACH_NET2BIG)	+= net2big-setup.o
-obj-$(CONFIG_MACH_WNR854T)	+= wnr854t-setup.o
-obj-$(CONFIG_MACH_RD88F5181L_GE)	+= rd88f5181l-ge-setup.o
-obj-$(CONFIG_MACH_RD88F5181L_FXO)	+= rd88f5181l-fxo-setup.o
-obj-$(CONFIG_MACH_RD88F6183AP_GE)	+= rd88f6183ap-ge-setup.o
 
 obj-$(CONFIG_ARCH_ORION5X_DT)		+= board-dt.o
 obj-$(CONFIG_MACH_D2NET_DT)	+= board-d2net.o
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 2e711b7252c6..df056d60b675 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -18,7 +18,6 @@
 #include <linux/delay.h>
 #include <linux/clk-provider.h>
 #include <linux/cpu.h>
-#include <linux/platform_data/dsa.h>
 #include <asm/page.h>
 #include <asm/setup.h>
 #include <asm/system_misc.h>
@@ -101,15 +100,6 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
 
 
 /*****************************************************************************
- * Ethernet switch
- ****************************************************************************/
-void __init orion5x_eth_switch_init(struct dsa_chip_data *d)
-{
-	orion_ge00_switch_init(d);
-}
-
-
-/*****************************************************************************
  * I2C
  ****************************************************************************/
 void __init orion5x_i2c_init(void)
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index eb96009e21c4..f2e0577bf50f 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -4,7 +4,6 @@
 
 #include <linux/reboot.h>
 
-struct dsa_chip_data;
 struct mv643xx_eth_platform_data;
 struct mv_sata_platform_data;
 
@@ -42,7 +41,6 @@ void orion5x_setup_wins(void);
 void orion5x_ehci0_init(void);
 void orion5x_ehci1_init(void);
 void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data);
-void orion5x_eth_switch_init(struct dsa_chip_data *d);
 void orion5x_i2c_init(void);
 void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
 void orion5x_spi_init(void);
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
deleted file mode 100644
index fe1a4cef1ba2..000000000000
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ /dev/null
@@ -1,376 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-orion5x/db88f5281-setup.c
- *
- * Marvell Orion-2 Development Board Setup
- *
- * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/timer.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/i2c.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <linux/platform_data/mtd-orion_nand.h>
-#include "common.h"
-#include "mpp.h"
-#include "orion5x.h"
-
-/*****************************************************************************
- * DB-88F5281 on board devices
- ****************************************************************************/
-
-/*
- * 512K NOR flash Device bus boot chip select
- */
-
-#define DB88F5281_NOR_BOOT_BASE		0xf4000000
-#define DB88F5281_NOR_BOOT_SIZE		SZ_512K
-
-/*
- * 7-Segment on Device bus chip select 0
- */
-
-#define DB88F5281_7SEG_BASE		0xfa000000
-#define DB88F5281_7SEG_SIZE		SZ_1K
-
-/*
- * 32M NOR flash on Device bus chip select 1
- */
-
-#define DB88F5281_NOR_BASE		0xfc000000
-#define DB88F5281_NOR_SIZE		SZ_32M
-
-/*
- * 32M NAND flash on Device bus chip select 2
- */
-
-#define DB88F5281_NAND_BASE		0xfa800000
-#define DB88F5281_NAND_SIZE		SZ_1K
-
-/*
- * PCI
- */
-
-#define DB88F5281_PCI_SLOT0_OFFS		7
-#define DB88F5281_PCI_SLOT0_IRQ_PIN		12
-#define DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN	13
-
-/*****************************************************************************
- * 512M NOR Flash on Device bus Boot CS
- ****************************************************************************/
-
-static struct physmap_flash_data db88f5281_boot_flash_data = {
-	.width		= 1,	/* 8 bit bus width */
-};
-
-static struct resource db88f5281_boot_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= DB88F5281_NOR_BOOT_BASE,
-	.end		= DB88F5281_NOR_BOOT_BASE + DB88F5281_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device db88f5281_boot_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &db88f5281_boot_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &db88f5281_boot_flash_resource,
-};
-
-/*****************************************************************************
- * 32M NOR Flash on Device bus CS1
- ****************************************************************************/
-
-static struct physmap_flash_data db88f5281_nor_flash_data = {
-	.width		= 4,	/* 32 bit bus width */
-};
-
-static struct resource db88f5281_nor_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= DB88F5281_NOR_BASE,
-	.end		= DB88F5281_NOR_BASE + DB88F5281_NOR_SIZE - 1,
-};
-
-static struct platform_device db88f5281_nor_flash = {
-	.name		= "physmap-flash",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &db88f5281_nor_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &db88f5281_nor_flash_resource,
-};
-
-/*****************************************************************************
- * 32M NAND Flash on Device bus CS2
- ****************************************************************************/
-
-static struct mtd_partition db88f5281_nand_parts[] = {
-	{
-		.name = "kernel",
-		.offset = 0,
-		.size = SZ_2M,
-	}, {
-		.name = "root",
-		.offset = SZ_2M,
-		.size = (SZ_16M - SZ_2M),
-	}, {
-		.name = "user",
-		.offset = SZ_16M,
-		.size = SZ_8M,
-	}, {
-		.name = "recovery",
-		.offset = (SZ_16M + SZ_8M),
-		.size = SZ_8M,
-	},
-};
-
-static struct resource db88f5281_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= DB88F5281_NAND_BASE,
-	.end		= DB88F5281_NAND_BASE + DB88F5281_NAND_SIZE - 1,
-};
-
-static struct orion_nand_data db88f5281_nand_data = {
-	.parts		= db88f5281_nand_parts,
-	.nr_parts	= ARRAY_SIZE(db88f5281_nand_parts),
-	.cle		= 0,
-	.ale		= 1,
-	.width		= 8,
-};
-
-static struct platform_device db88f5281_nand_flash = {
-	.name		= "orion_nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &db88f5281_nand_data,
-	},
-	.resource	= &db88f5281_nand_resource,
-	.num_resources	= 1,
-};
-
-/*****************************************************************************
- * 7-Segment on Device bus CS0
- * Dummy counter every 2 sec
- ****************************************************************************/
-
-static void __iomem *db88f5281_7seg;
-static struct timer_list db88f5281_timer;
-
-static void db88f5281_7seg_event(struct timer_list *unused)
-{
-	static int count = 0;
-	writel(0, db88f5281_7seg + (count << 4));
-	count = (count + 1) & 7;
-	mod_timer(&db88f5281_timer, jiffies + 2 * HZ);
-}
-
-static int __init db88f5281_7seg_init(void)
-{
-	if (machine_is_db88f5281()) {
-		db88f5281_7seg = ioremap(DB88F5281_7SEG_BASE,
-					DB88F5281_7SEG_SIZE);
-		if (!db88f5281_7seg) {
-			printk(KERN_ERR "Failed to ioremap db88f5281_7seg\n");
-			return -EIO;
-		}
-		timer_setup(&db88f5281_timer, db88f5281_7seg_event, 0);
-		mod_timer(&db88f5281_timer, jiffies + 2 * HZ);
-	}
-
-	return 0;
-}
-
-__initcall(db88f5281_7seg_init);
-
-/*****************************************************************************
- * PCI
- ****************************************************************************/
-
-static void __init db88f5281_pci_preinit(void)
-{
-	int pin;
-
-	/*
-	 * Configure PCI GPIO IRQ pins
-	 */
-	pin = DB88F5281_PCI_SLOT0_IRQ_PIN;
-	if (gpio_request(pin, "PCI Int1") == 0) {
-		if (gpio_direction_input(pin) == 0) {
-			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
-		} else {
-			printk(KERN_ERR "db88f5281_pci_preinit failed to "
-					"set_irq_type pin %d\n", pin);
-			gpio_free(pin);
-		}
-	} else {
-		printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin);
-	}
-
-	pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN;
-	if (gpio_request(pin, "PCI Int2") == 0) {
-		if (gpio_direction_input(pin) == 0) {
-			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
-		} else {
-			printk(KERN_ERR "db88f5281_pci_preinit failed "
-					"to set_irq_type pin %d\n", pin);
-			gpio_free(pin);
-		}
-	} else {
-		printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin);
-	}
-}
-
-static int __init db88f5281_pci_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	int irq;
-
-	/*
-	 * Check for devices with hard-wired IRQs.
-	 */
-	irq = orion5x_pci_map_irq(dev, slot, pin);
-	if (irq != -1)
-		return irq;
-
-	/*
-	 * PCI IRQs are connected via GPIOs.
-	 */
-	switch (slot - DB88F5281_PCI_SLOT0_OFFS) {
-	case 0:
-		return gpio_to_irq(DB88F5281_PCI_SLOT0_IRQ_PIN);
-	case 1:
-	case 2:
-		return gpio_to_irq(DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN);
-	default:
-		return -1;
-	}
-}
-
-static struct hw_pci db88f5281_pci __initdata = {
-	.nr_controllers	= 2,
-	.preinit	= db88f5281_pci_preinit,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= db88f5281_pci_map_irq,
-};
-
-static int __init db88f5281_pci_init(void)
-{
-	if (machine_is_db88f5281())
-		pci_common_init(&db88f5281_pci);
-
-	return 0;
-}
-
-subsys_initcall(db88f5281_pci_init);
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-static struct mv643xx_eth_platform_data db88f5281_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-/*****************************************************************************
- * RTC DS1339 on I2C bus
- ****************************************************************************/
-static struct i2c_board_info __initdata db88f5281_i2c_rtc = {
-	I2C_BOARD_INFO("ds1339", 0x68),
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int db88f5281_mpp_modes[] __initdata = {
-	MPP0_GPIO,		/* USB Over Current */
-	MPP1_GPIO,		/* USB Vbat input */
-	MPP2_PCI_ARB,		/* PCI_REQn[2] */
-	MPP3_PCI_ARB,		/* PCI_GNTn[2] */
-	MPP4_PCI_ARB,		/* PCI_REQn[3] */
-	MPP5_PCI_ARB,		/* PCI_GNTn[3] */
-	MPP6_GPIO,		/* JP0, CON17.2 */
-	MPP7_GPIO,		/* JP1, CON17.1 */
-	MPP8_GPIO,		/* JP2, CON11.2 */
-	MPP9_GPIO,		/* JP3, CON11.3 */
-	MPP10_GPIO,		/* RTC int */
-	MPP11_GPIO,		/* Baud Rate Generator */
-	MPP12_GPIO,		/* PCI int 1 */
-	MPP13_GPIO,		/* PCI int 2 */
-	MPP14_NAND,		/* NAND_REn[2] */
-	MPP15_NAND,		/* NAND_WEn[2] */
-	MPP16_UART,		/* UART1_RX */
-	MPP17_UART,		/* UART1_TX */
-	MPP18_UART,		/* UART1_CTSn */
-	MPP19_UART,		/* UART1_RTSn */
-	0,
-};
-
-static void __init db88f5281_init(void)
-{
-	/*
-	 * Basic Orion setup. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(db88f5281_mpp_modes);
-	writel(0, MPP_DEV_CTRL);		/* DEV_D[31:16] */
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_eth_init(&db88f5281_eth_data);
-	orion5x_i2c_init();
-	orion5x_uart0_init();
-	orion5x_uart1_init();
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-				    ORION_MBUS_DEVBUS_BOOT_ATTR,
-				    DB88F5281_NOR_BOOT_BASE,
-				    DB88F5281_NOR_BOOT_SIZE);
-	platform_device_register(&db88f5281_boot_flash);
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(0),
-				    ORION_MBUS_DEVBUS_ATTR(0),
-				    DB88F5281_7SEG_BASE,
-				    DB88F5281_7SEG_SIZE);
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(1),
-				    ORION_MBUS_DEVBUS_ATTR(1),
-				    DB88F5281_NOR_BASE,
-				    DB88F5281_NOR_SIZE);
-	platform_device_register(&db88f5281_nor_flash);
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(2),
-				    ORION_MBUS_DEVBUS_ATTR(2),
-				    DB88F5281_NAND_BASE,
-				    DB88F5281_NAND_SIZE);
-	platform_device_register(&db88f5281_nand_flash);
-
-	i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);
-}
-
-MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
-	/* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= ORION5X_NR_IRQS,
-	.init_machine	= db88f5281_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
deleted file mode 100644
index af07f617465f..000000000000
--- a/arch/arm/mach-orion5x/ls_hgl-setup.c
+++ /dev/null
@@ -1,275 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-orion5x/ls_hgl-setup.c
- *
- * Maintainer: Zhu Qingsen <zhuqs@cn.fujitsu.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "common.h"
-#include "mpp.h"
-#include "orion5x.h"
-
-/*****************************************************************************
- * Linkstation LS-HGL Info
- ****************************************************************************/
-
-/*
- * 256K NOR flash Device bus boot chip select
- */
-
-#define LS_HGL_NOR_BOOT_BASE	0xf4000000
-#define LS_HGL_NOR_BOOT_SIZE	SZ_256K
-
-/*****************************************************************************
- * 256KB NOR Flash on BOOT Device
- ****************************************************************************/
-
-static struct physmap_flash_data ls_hgl_nor_flash_data = {
-	.width		= 1,
-};
-
-static struct resource ls_hgl_nor_flash_resource = {
-	.flags	= IORESOURCE_MEM,
-	.start	= LS_HGL_NOR_BOOT_BASE,
-	.end	= LS_HGL_NOR_BOOT_BASE + LS_HGL_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device ls_hgl_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &ls_hgl_nor_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &ls_hgl_nor_flash_resource,
-};
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data ls_hgl_eth_data = {
-	.phy_addr	= 8,
-};
-
-/*****************************************************************************
- * RTC 5C372a on I2C bus
- ****************************************************************************/
-
-static struct i2c_board_info __initdata ls_hgl_i2c_rtc = {
-	I2C_BOARD_INFO("rs5c372a", 0x32),
-};
-
-/*****************************************************************************
- * LEDs attached to GPIO
- ****************************************************************************/
-
-#define LS_HGL_GPIO_LED_ALARM   2
-#define LS_HGL_GPIO_LED_INFO    3
-#define LS_HGL_GPIO_LED_FUNC    17
-#define LS_HGL_GPIO_LED_PWR     0
-
-
-static struct gpio_led ls_hgl_led_pins[] = {
-	{
-		.name	   = "alarm:red",
-		.gpio	   = LS_HGL_GPIO_LED_ALARM,
-		.active_low     = 1,
-	}, {
-		.name	   = "info:amber",
-		.gpio	   = LS_HGL_GPIO_LED_INFO,
-		.active_low     = 1,
-	}, {
-		.name	   = "func:blue:top",
-		.gpio	   = LS_HGL_GPIO_LED_FUNC,
-		.active_low     = 1,
-	}, {
-		.name	   = "power:blue:bottom",
-		.gpio	   = LS_HGL_GPIO_LED_PWR,
-	},
-};
-
-static struct gpio_led_platform_data ls_hgl_led_data = {
-	.leds	   = ls_hgl_led_pins,
-	.num_leds       = ARRAY_SIZE(ls_hgl_led_pins),
-};
-
-static struct platform_device ls_hgl_leds = {
-	.name   = "leds-gpio",
-	.id     = -1,
-	.dev    = {
-		.platform_data  = &ls_hgl_led_data,
-	},
-};
-
-/****************************************************************************
- * GPIO Attached Keys
- ****************************************************************************/
-#define LS_HGL_GPIO_KEY_FUNC       15
-#define LS_HGL_GPIO_KEY_POWER      8
-#define LS_HGL_GPIO_KEY_AUTOPOWER  10
-
-#define LS_HGL_SW_POWER     0x00
-#define LS_HGL_SW_AUTOPOWER 0x01
-
-static struct gpio_keys_button ls_hgl_buttons[] = {
-	{
-		.code	   = KEY_OPTION,
-		.gpio	   = LS_HGL_GPIO_KEY_FUNC,
-		.desc	   = "Function Button",
-		.active_low     = 1,
-	}, {
-		.type		= EV_SW,
-		.code	   = LS_HGL_SW_POWER,
-		.gpio	   = LS_HGL_GPIO_KEY_POWER,
-		.desc	   = "Power-on Switch",
-		.active_low     = 1,
-	}, {
-		.type		= EV_SW,
-		.code	   = LS_HGL_SW_AUTOPOWER,
-		.gpio	   = LS_HGL_GPIO_KEY_AUTOPOWER,
-		.desc	   = "Power-auto Switch",
-		.active_low     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data ls_hgl_button_data = {
-	.buttons	= ls_hgl_buttons,
-	.nbuttons       = ARRAY_SIZE(ls_hgl_buttons),
-};
-
-static struct platform_device ls_hgl_button_device = {
-	.name	   = "gpio-keys",
-	.id	     = -1,
-	.num_resources  = 0,
-	.dev	    = {
-		.platform_data  = &ls_hgl_button_data,
-	},
-};
-
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-static struct mv_sata_platform_data ls_hgl_sata_data = {
-	.n_ports	= 2,
-};
-
-
-/*****************************************************************************
- * Linkstation LS-HGL specific power off method: reboot
- ****************************************************************************/
-/*
- * On the Linkstation LS-HGL, the shutdown process is following:
- * - Userland monitors key events until the power switch goes to off position
- * - The board reboots
- * - U-boot starts and goes into an idle mode waiting for the user
- *   to move the switch to ON position
- */
-
-static void ls_hgl_power_off(void)
-{
-	orion5x_restart(REBOOT_HARD, NULL);
-}
-
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-
-#define LS_HGL_GPIO_USB_POWER	9
-#define LS_HGL_GPIO_AUTO_POWER	10
-#define LS_HGL_GPIO_POWER	    8
-
-#define LS_HGL_GPIO_HDD_POWER	1
-
-static unsigned int ls_hgl_mpp_modes[] __initdata = {
-	MPP0_GPIO, /* LED_PWR */
-	MPP1_GPIO, /* HDD_PWR */
-	MPP2_GPIO, /* LED_ALARM */
-	MPP3_GPIO, /* LED_INFO */
-	MPP4_UNUSED,
-	MPP5_UNUSED,
-	MPP6_GPIO, /* FAN_LCK */
-	MPP7_GPIO, /* INIT */
-	MPP8_GPIO, /* POWER */
-	MPP9_GPIO, /* USB_PWR */
-	MPP10_GPIO, /* AUTO_POWER */
-	MPP11_UNUSED, /* LED_ETH (dummy) */
-	MPP12_UNUSED,
-	MPP13_UNUSED,
-	MPP14_UNUSED,
-	MPP15_GPIO, /* FUNC */
-	MPP16_UNUSED,
-	MPP17_GPIO, /* LED_FUNC */
-	MPP18_UNUSED,
-	MPP19_UNUSED,
-	0,
-};
-
-static void __init ls_hgl_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(ls_hgl_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_ehci1_init();
-	orion5x_eth_init(&ls_hgl_eth_data);
-	orion5x_i2c_init();
-	orion5x_sata_init(&ls_hgl_sata_data);
-	orion5x_uart0_init();
-	orion5x_xor_init();
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-				    ORION_MBUS_DEVBUS_BOOT_ATTR,
-				    LS_HGL_NOR_BOOT_BASE,
-				    LS_HGL_NOR_BOOT_SIZE);
-	platform_device_register(&ls_hgl_nor_flash);
-
-	platform_device_register(&ls_hgl_button_device);
-
-	platform_device_register(&ls_hgl_leds);
-
-	i2c_register_board_info(0, &ls_hgl_i2c_rtc, 1);
-
-	/* enable USB power */
-	gpio_set_value(LS_HGL_GPIO_USB_POWER, 1);
-
-	/* register power-off method */
-	pm_power_off = ls_hgl_power_off;
-
-	pr_info("%s: finished\n", __func__);
-}
-
-MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL")
-	/* Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= ORION5X_NR_IRQS,
-	.init_machine	= ls_hgl_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
deleted file mode 100644
index 432fc8357d9e..000000000000
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ /dev/null
@@ -1,172 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
- *
- * Marvell Orion-VoIP FXO Reference Design Setup
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <linux/platform_data/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include "common.h"
-#include "mpp.h"
-#include "orion5x.h"
-
-/*****************************************************************************
- * RD-88F5181L FXO Info
- ****************************************************************************/
-/*
- * 8M NOR flash Device bus boot chip select
- */
-#define RD88F5181L_FXO_NOR_BOOT_BASE		0xff800000
-#define RD88F5181L_FXO_NOR_BOOT_SIZE		SZ_8M
-
-
-/*****************************************************************************
- * 8M NOR Flash on Device bus Boot chip select
- ****************************************************************************/
-static struct physmap_flash_data rd88f5181l_fxo_nor_boot_flash_data = {
-	.width		= 1,
-};
-
-static struct resource rd88f5181l_fxo_nor_boot_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= RD88F5181L_FXO_NOR_BOOT_BASE,
-	.end		= RD88F5181L_FXO_NOR_BOOT_BASE +
-			  RD88F5181L_FXO_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device rd88f5181l_fxo_nor_boot_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &rd88f5181l_fxo_nor_boot_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &rd88f5181l_fxo_nor_boot_flash_resource,
-};
-
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int rd88f5181l_fxo_mpp_modes[] __initdata = {
-	MPP0_GPIO,		/* LED1 CardBus LED (front panel) */
-	MPP1_GPIO,		/* PCI_intA */
-	MPP2_GPIO,		/* Hard Reset / Factory Init*/
-	MPP3_GPIO,		/* FXS or DAA select */
-	MPP4_GPIO,		/* LED6 - phone LED (front panel) */
-	MPP5_GPIO,		/* LED5 - phone LED (front panel) */
-	MPP6_PCI_CLK,		/* CPU PCI refclk */
-	MPP7_PCI_CLK,		/* PCI/PCIe refclk */
-	MPP8_GPIO,		/* CardBus reset */
-	MPP9_GPIO,		/* GE_RXERR */
-	MPP10_GPIO,		/* LED2 MiniPCI LED (front panel) */
-	MPP11_GPIO,		/* Lifeline control */
-	MPP12_GIGE,		/* GE_TXD[4] */
-	MPP13_GIGE,		/* GE_TXD[5] */
-	MPP14_GIGE,		/* GE_TXD[6] */
-	MPP15_GIGE,		/* GE_TXD[7] */
-	MPP16_GIGE,		/* GE_RXD[4] */
-	MPP17_GIGE,		/* GE_RXD[5] */
-	MPP18_GIGE,		/* GE_RXD[6] */
-	MPP19_GIGE,		/* GE_RXD[7] */
-	0,
-};
-
-static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_NONE,
-	.speed		= SPEED_1000,
-	.duplex		= DUPLEX_FULL,
-};
-
-static struct dsa_chip_data rd88f5181l_fxo_switch_chip_data = {
-	.port_names[0]	= "lan2",
-	.port_names[1]	= "lan1",
-	.port_names[2]	= "wan",
-	.port_names[3]	= "cpu",
-	.port_names[5]	= "lan4",
-	.port_names[7]	= "lan3",
-};
-
-static void __init rd88f5181l_fxo_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(rd88f5181l_fxo_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_eth_init(&rd88f5181l_fxo_eth_data);
-	orion5x_eth_switch_init(&rd88f5181l_fxo_switch_chip_data);
-	orion5x_uart0_init();
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-				    ORION_MBUS_DEVBUS_BOOT_ATTR,
-				    RD88F5181L_FXO_NOR_BOOT_BASE,
-				    RD88F5181L_FXO_NOR_BOOT_SIZE);
-	platform_device_register(&rd88f5181l_fxo_nor_boot_flash);
-}
-
-static int __init
-rd88f5181l_fxo_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	/*
-	 * Check for devices with hard-wired IRQs.
-	 */
-	irq = orion5x_pci_map_irq(dev, slot, pin);
-	if (irq != -1)
-		return irq;
-
-	/*
-	 * Mini-PCI / Cardbus slot.
-	 */
-	return gpio_to_irq(1);
-}
-
-static struct hw_pci rd88f5181l_fxo_pci __initdata = {
-	.nr_controllers	= 2,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= rd88f5181l_fxo_pci_map_irq,
-};
-
-static int __init rd88f5181l_fxo_pci_init(void)
-{
-	if (machine_is_rd88f5181l_fxo()) {
-		orion5x_pci_set_cardbus_mode();
-		pci_common_init(&rd88f5181l_fxo_pci);
-	}
-
-	return 0;
-}
-subsys_initcall(rd88f5181l_fxo_pci_init);
-
-MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design")
-	/* Maintainer: Nicolas Pitre <nico@marvell.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= ORION5X_NR_IRQS,
-	.init_machine	= rd88f5181l_fxo_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
deleted file mode 100644
index d4b1a9c3cd36..000000000000
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ /dev/null
@@ -1,183 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
- *
- * Marvell Orion-VoIP GE Reference Design Setup
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include "common.h"
-#include "mpp.h"
-#include "orion5x.h"
-
-/*****************************************************************************
- * RD-88F5181L GE Info
- ****************************************************************************/
-/*
- * 16M NOR flash Device bus boot chip select
- */
-#define RD88F5181L_GE_NOR_BOOT_BASE		0xff000000
-#define RD88F5181L_GE_NOR_BOOT_SIZE		SZ_16M
-
-
-/*****************************************************************************
- * 16M NOR Flash on Device bus Boot chip select
- ****************************************************************************/
-static struct physmap_flash_data rd88f5181l_ge_nor_boot_flash_data = {
-	.width		= 1,
-};
-
-static struct resource rd88f5181l_ge_nor_boot_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= RD88F5181L_GE_NOR_BOOT_BASE,
-	.end		= RD88F5181L_GE_NOR_BOOT_BASE +
-			  RD88F5181L_GE_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device rd88f5181l_ge_nor_boot_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &rd88f5181l_ge_nor_boot_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &rd88f5181l_ge_nor_boot_flash_resource,
-};
-
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int rd88f5181l_ge_mpp_modes[] __initdata = {
-	MPP0_GPIO,		/* LED1 */
-	MPP1_GPIO,		/* LED5 */
-	MPP2_GPIO,		/* LED4 */
-	MPP3_GPIO,		/* LED3 */
-	MPP4_GPIO,		/* PCI_intA */
-	MPP5_GPIO,		/* RTC interrupt */
-	MPP6_PCI_CLK,		/* CPU PCI refclk */
-	MPP7_PCI_CLK,		/* PCI/PCIe refclk */
-	MPP8_GPIO,		/* 88e6131 interrupt */
-	MPP9_GPIO,		/* GE_RXERR */
-	MPP10_GPIO,		/* PCI_intB */
-	MPP11_GPIO,		/* LED2 */
-	MPP12_GIGE,		/* GE_TXD[4] */
-	MPP13_GIGE,		/* GE_TXD[5] */
-	MPP14_GIGE,		/* GE_TXD[6] */
-	MPP15_GIGE,		/* GE_TXD[7] */
-	MPP16_GIGE,		/* GE_RXD[4] */
-	MPP17_GIGE,		/* GE_RXD[5] */
-	MPP18_GIGE,		/* GE_RXD[6] */
-	MPP19_GIGE,		/* GE_RXD[7] */
-	0,
-};
-
-static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_NONE,
-	.speed		= SPEED_1000,
-	.duplex		= DUPLEX_FULL,
-};
-
-static struct dsa_chip_data rd88f5181l_ge_switch_chip_data = {
-	.port_names[0]	= "lan2",
-	.port_names[1]	= "lan1",
-	.port_names[2]	= "wan",
-	.port_names[3]	= "cpu",
-	.port_names[5]	= "lan4",
-	.port_names[7]	= "lan3",
-};
-
-static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {
-	I2C_BOARD_INFO("ds1338", 0x68),
-};
-
-static void __init rd88f5181l_ge_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(rd88f5181l_ge_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_eth_init(&rd88f5181l_ge_eth_data);
-	orion5x_eth_switch_init(&rd88f5181l_ge_switch_chip_data);
-	orion5x_i2c_init();
-	orion5x_uart0_init();
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-				    ORION_MBUS_DEVBUS_BOOT_ATTR,
-				    RD88F5181L_GE_NOR_BOOT_BASE,
-				    RD88F5181L_GE_NOR_BOOT_SIZE);
-	platform_device_register(&rd88f5181l_ge_nor_boot_flash);
-
-	i2c_register_board_info(0, &rd88f5181l_ge_i2c_rtc, 1);
-}
-
-static int __init
-rd88f5181l_ge_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	/*
-	 * Check for devices with hard-wired IRQs.
-	 */
-	irq = orion5x_pci_map_irq(dev, slot, pin);
-	if (irq != -1)
-		return irq;
-
-	/*
-	 * Cardbus slot.
-	 */
-	if (pin == 1)
-		return gpio_to_irq(4);
-	else
-		return gpio_to_irq(10);
-}
-
-static struct hw_pci rd88f5181l_ge_pci __initdata = {
-	.nr_controllers	= 2,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= rd88f5181l_ge_pci_map_irq,
-};
-
-static int __init rd88f5181l_ge_pci_init(void)
-{
-	if (machine_is_rd88f5181l_ge()) {
-		orion5x_pci_set_cardbus_mode();
-		pci_common_init(&rd88f5181l_ge_pci);
-	}
-
-	return 0;
-}
-subsys_initcall(rd88f5181l_ge_pci_init);
-
-MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design")
-	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= ORION5X_NR_IRQS,
-	.init_machine	= rd88f5181l_ge_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
deleted file mode 100644
index 6ffcfc6445e2..000000000000
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ /dev/null
@@ -1,288 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-orion5x/rd88f5182-setup.c
- *
- * Marvell Orion-NAS Reference Design Setup
- *
- * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ata_platform.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include "common.h"
-#include "mpp.h"
-#include "orion5x.h"
-
-/*****************************************************************************
- * RD-88F5182 Info
- ****************************************************************************/
-
-/*
- * 512K NOR flash Device bus boot chip select
- */
-
-#define RD88F5182_NOR_BOOT_BASE		0xf4000000
-#define RD88F5182_NOR_BOOT_SIZE		SZ_512K
-
-/*
- * 16M NOR flash on Device bus chip select 1
- */
-
-#define RD88F5182_NOR_BASE		0xfc000000
-#define RD88F5182_NOR_SIZE		SZ_16M
-
-/*
- * PCI
- */
-
-#define RD88F5182_PCI_SLOT0_OFFS	7
-#define RD88F5182_PCI_SLOT0_IRQ_A_PIN	7
-#define RD88F5182_PCI_SLOT0_IRQ_B_PIN	6
-
-/*****************************************************************************
- * 16M NOR Flash on Device bus CS1
- ****************************************************************************/
-
-static struct physmap_flash_data rd88f5182_nor_flash_data = {
-	.width		= 1,
-};
-
-static struct resource rd88f5182_nor_flash_resource = {
-	.flags			= IORESOURCE_MEM,
-	.start			= RD88F5182_NOR_BASE,
-	.end			= RD88F5182_NOR_BASE + RD88F5182_NOR_SIZE - 1,
-};
-
-static struct platform_device rd88f5182_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &rd88f5182_nor_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &rd88f5182_nor_flash_resource,
-};
-
-/*****************************************************************************
- * Use GPIO LED as CPU active indication
- ****************************************************************************/
-
-#define RD88F5182_GPIO_LED		0
-
-static struct gpio_led rd88f5182_gpio_led_pins[] = {
-	{
-		.name		= "rd88f5182:cpu",
-		.default_trigger = "cpu0",
-		.gpio		= RD88F5182_GPIO_LED,
-	},
-};
-
-static struct gpio_led_platform_data rd88f5182_gpio_led_data = {
-	.leds		= rd88f5182_gpio_led_pins,
-	.num_leds	= ARRAY_SIZE(rd88f5182_gpio_led_pins),
-};
-
-static struct platform_device rd88f5182_gpio_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &rd88f5182_gpio_led_data,
-	},
-};
-
-/*****************************************************************************
- * PCI
- ****************************************************************************/
-
-static void __init rd88f5182_pci_preinit(void)
-{
-	int pin;
-
-	/*
-	 * Configure PCI GPIO IRQ pins
-	 */
-	pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN;
-	if (gpio_request(pin, "PCI IntA") == 0) {
-		if (gpio_direction_input(pin) == 0) {
-			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
-		} else {
-			printk(KERN_ERR "rd88f5182_pci_preinit failed to "
-					"set_irq_type pin %d\n", pin);
-			gpio_free(pin);
-		}
-	} else {
-		printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin);
-	}
-
-	pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN;
-	if (gpio_request(pin, "PCI IntB") == 0) {
-		if (gpio_direction_input(pin) == 0) {
-			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
-		} else {
-			printk(KERN_ERR "rd88f5182_pci_preinit failed to "
-					"set_irq_type pin %d\n", pin);
-			gpio_free(pin);
-		}
-	} else {
-		printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin);
-	}
-}
-
-static int __init rd88f5182_pci_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	int irq;
-
-	/*
-	 * Check for devices with hard-wired IRQs.
-	 */
-	irq = orion5x_pci_map_irq(dev, slot, pin);
-	if (irq != -1)
-		return irq;
-
-	/*
-	 * PCI IRQs are connected via GPIOs
-	 */
-	switch (slot - RD88F5182_PCI_SLOT0_OFFS) {
-	case 0:
-		if (pin == 1)
-			return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_A_PIN);
-		else
-			return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_B_PIN);
-	default:
-		return -1;
-	}
-}
-
-static struct hw_pci rd88f5182_pci __initdata = {
-	.nr_controllers	= 2,
-	.preinit	= rd88f5182_pci_preinit,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= rd88f5182_pci_map_irq,
-};
-
-static int __init rd88f5182_pci_init(void)
-{
-	if (machine_is_rd88f5182())
-		pci_common_init(&rd88f5182_pci);
-
-	return 0;
-}
-
-subsys_initcall(rd88f5182_pci_init);
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data rd88f5182_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-/*****************************************************************************
- * RTC DS1338 on I2C bus
- ****************************************************************************/
-static struct i2c_board_info __initdata rd88f5182_i2c_rtc = {
-	I2C_BOARD_INFO("ds1338", 0x68),
-};
-
-/*****************************************************************************
- * Sata
- ****************************************************************************/
-static struct mv_sata_platform_data rd88f5182_sata_data = {
-	.n_ports	= 2,
-};
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-static unsigned int rd88f5182_mpp_modes[] __initdata = {
-	MPP0_GPIO,		/* Debug Led */
-	MPP1_GPIO,		/* Reset Switch */
-	MPP2_UNUSED,
-	MPP3_GPIO,		/* RTC Int */
-	MPP4_GPIO,
-	MPP5_GPIO,
-	MPP6_GPIO,		/* PCI_intA */
-	MPP7_GPIO,		/* PCI_intB */
-	MPP8_UNUSED,
-	MPP9_UNUSED,
-	MPP10_UNUSED,
-	MPP11_UNUSED,
-	MPP12_SATA_LED,		/* SATA 0 presence */
-	MPP13_SATA_LED,		/* SATA 1 presence */
-	MPP14_SATA_LED,		/* SATA 0 active */
-	MPP15_SATA_LED,		/* SATA 1 active */
-	MPP16_UNUSED,
-	MPP17_UNUSED,
-	MPP18_UNUSED,
-	MPP19_UNUSED,
-	0,
-};
-
-static void __init rd88f5182_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(rd88f5182_mpp_modes);
-
-	/*
-	 * MPP[20] PCI Clock to MV88F5182
-	 * MPP[21] PCI Clock to mini PCI CON11
-	 * MPP[22] USB 0 over current indication
-	 * MPP[23] USB 1 over current indication
-	 * MPP[24] USB 1 over current enable
-	 * MPP[25] USB 0 over current enable
-	 */
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_ehci1_init();
-	orion5x_eth_init(&rd88f5182_eth_data);
-	orion5x_i2c_init();
-	orion5x_sata_init(&rd88f5182_sata_data);
-	orion5x_uart0_init();
-	orion5x_xor_init();
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-				    ORION_MBUS_DEVBUS_BOOT_ATTR,
-				    RD88F5182_NOR_BOOT_BASE,
-				    RD88F5182_NOR_BOOT_SIZE);
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(1),
-				    ORION_MBUS_DEVBUS_ATTR(1),
-				    RD88F5182_NOR_BASE,
-				    RD88F5182_NOR_SIZE);
-	platform_device_register(&rd88f5182_nor_flash);
-	platform_device_register(&rd88f5182_gpio_leds);
-
-	i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1);
-}
-
-MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
-	/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= ORION5X_NR_IRQS,
-	.init_machine	= rd88f5182_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
deleted file mode 100644
index 93f74fd6b4da..000000000000
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ /dev/null
@@ -1,120 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-orion5x/rd88f6183-ap-ge-setup.c
- *
- * Marvell Orion-1-90 AP GE Reference Design Setup
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/ethtool.h>
-#include <linux/platform_data/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include "common.h"
-#include "orion5x.h"
-
-static struct mv643xx_eth_platform_data rd88f6183ap_ge_eth_data = {
-	.phy_addr	= -1,
-	.speed		= SPEED_1000,
-	.duplex		= DUPLEX_FULL,
-};
-
-static struct dsa_chip_data rd88f6183ap_ge_switch_chip_data = {
-	.port_names[0]	= "lan1",
-	.port_names[1]	= "lan2",
-	.port_names[2]	= "lan3",
-	.port_names[3]	= "lan4",
-	.port_names[4]	= "wan",
-	.port_names[5]	= "cpu",
-};
-
-static struct mtd_partition rd88f6183ap_ge_partitions[] = {
-	{
-		.name	= "kernel",
-		.offset	= 0x00000000,
-		.size	= 0x00200000,
-	}, {
-		.name	= "rootfs",
-		.offset	= 0x00200000,
-		.size	= 0x00500000,
-	}, {
-		.name	= "nvram",
-		.offset	= 0x00700000,
-		.size	= 0x00080000,
-	},
-};
-
-static struct flash_platform_data rd88f6183ap_ge_spi_slave_data = {
-	.type		= "m25p64",
-	.nr_parts	= ARRAY_SIZE(rd88f6183ap_ge_partitions),
-	.parts		= rd88f6183ap_ge_partitions,
-};
-
-static struct spi_board_info __initdata rd88f6183ap_ge_spi_slave_info[] = {
-	{
-		.modalias	= "m25p80",
-		.platform_data	= &rd88f6183ap_ge_spi_slave_data,
-		.max_speed_hz	= 20000000,
-		.bus_num	= 0,
-		.chip_select	= 0,
-	},
-};
-
-static void __init rd88f6183ap_ge_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_eth_init(&rd88f6183ap_ge_eth_data);
-	orion5x_eth_switch_init(&rd88f6183ap_ge_switch_chip_data);
-	spi_register_board_info(rd88f6183ap_ge_spi_slave_info,
-				ARRAY_SIZE(rd88f6183ap_ge_spi_slave_info));
-	orion5x_spi_init();
-	orion5x_uart0_init();
-}
-
-static struct hw_pci rd88f6183ap_ge_pci __initdata = {
-	.nr_controllers	= 2,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= orion5x_pci_map_irq,
-};
-
-static int __init rd88f6183ap_ge_pci_init(void)
-{
-	if (machine_is_rd88f6183ap_ge()) {
-		orion5x_pci_disable();
-		pci_common_init(&rd88f6183ap_ge_pci);
-	}
-
-	return 0;
-}
-subsys_initcall(rd88f6183ap_ge_pci_init);
-
-MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design")
-	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= ORION5X_NR_IRQS,
-	.init_machine	= rd88f6183ap_ge_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
deleted file mode 100644
index e5f327054dd3..000000000000
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ /dev/null
@@ -1,175 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-// arch/arm/mach-orion5x/wnr854t-setup.c
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <linux/platform_data/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include "orion5x.h"
-#include "common.h"
-#include "mpp.h"
-
-static unsigned int wnr854t_mpp_modes[] __initdata = {
-	MPP0_GPIO,		/* Power LED green (0=on) */
-	MPP1_GPIO,		/* Reset Button (0=off) */
-	MPP2_GPIO,		/* Power LED blink (0=off) */
-	MPP3_GPIO,		/* WAN Status LED amber (0=off) */
-	MPP4_GPIO,		/* PCI int */
-	MPP5_GPIO,		/* ??? */
-	MPP6_GPIO,		/* ??? */
-	MPP7_GPIO,		/* ??? */
-	MPP8_UNUSED,		/* ??? */
-	MPP9_GIGE,		/* GE_RXERR */
-	MPP10_UNUSED,		/* ??? */
-	MPP11_UNUSED,		/* ??? */
-	MPP12_GIGE,		/* GE_TXD[4] */
-	MPP13_GIGE,		/* GE_TXD[5] */
-	MPP14_GIGE,		/* GE_TXD[6] */
-	MPP15_GIGE,		/* GE_TXD[7] */
-	MPP16_GIGE,		/* GE_RXD[4] */
-	MPP17_GIGE,		/* GE_RXD[5] */
-	MPP18_GIGE,		/* GE_RXD[6] */
-	MPP19_GIGE,		/* GE_RXD[7] */
-	0,
-};
-
-/*
- * 8M NOR flash Device bus boot chip select
- */
-#define WNR854T_NOR_BOOT_BASE	0xf4000000
-#define WNR854T_NOR_BOOT_SIZE	SZ_8M
-
-static struct mtd_partition wnr854t_nor_flash_partitions[] = {
-	{
-		.name		= "kernel",
-		.offset		= 0x00000000,
-		.size		= 0x00100000,
-	}, {
-		.name		= "rootfs",
-		.offset		= 0x00100000,
-		.size		= 0x00660000,
-	}, {
-		.name		= "uboot",
-		.offset		= 0x00760000,
-		.size		= 0x00040000,
-	},
-};
-
-static struct physmap_flash_data wnr854t_nor_flash_data = {
-	.width		= 2,
-	.parts		= wnr854t_nor_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(wnr854t_nor_flash_partitions),
-};
-
-static struct resource wnr854t_nor_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= WNR854T_NOR_BOOT_BASE,
-	.end		= WNR854T_NOR_BOOT_BASE + WNR854T_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device wnr854t_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &wnr854t_nor_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &wnr854t_nor_flash_resource,
-};
-
-static struct mv643xx_eth_platform_data wnr854t_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_NONE,
-	.speed		= SPEED_1000,
-	.duplex		= DUPLEX_FULL,
-};
-
-static struct dsa_chip_data wnr854t_switch_chip_data = {
-	.port_names[0] = "lan3",
-	.port_names[1] = "lan4",
-	.port_names[2] = "wan",
-	.port_names[3] = "cpu",
-	.port_names[5] = "lan1",
-	.port_names[7] = "lan2",
-};
-
-static void __init wnr854t_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(wnr854t_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_eth_init(&wnr854t_eth_data);
-	orion5x_eth_switch_init(&wnr854t_switch_chip_data);
-	orion5x_uart0_init();
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-				    ORION_MBUS_DEVBUS_BOOT_ATTR,
-				    WNR854T_NOR_BOOT_BASE,
-				    WNR854T_NOR_BOOT_SIZE);
-	platform_device_register(&wnr854t_nor_flash);
-}
-
-static int __init wnr854t_pci_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	int irq;
-
-	/*
-	 * Check for devices with hard-wired IRQs.
-	 */
-	irq = orion5x_pci_map_irq(dev, slot, pin);
-	if (irq != -1)
-		return irq;
-
-	/*
-	 * Mini-PCI slot.
-	 */
-	if (slot == 7)
-		return gpio_to_irq(4);
-
-	return -1;
-}
-
-static struct hw_pci wnr854t_pci __initdata = {
-	.nr_controllers	= 2,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= wnr854t_pci_map_irq,
-};
-
-static int __init wnr854t_pci_init(void)
-{
-	if (machine_is_wnr854t())
-		pci_common_init(&wnr854t_pci);
-
-	return 0;
-}
-subsys_initcall(wnr854t_pci_init);
-
-MACHINE_START(WNR854T, "Netgear WNR854T")
-	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= ORION5X_NR_IRQS,
-	.init_machine	= wnr854t_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
deleted file mode 100644
index e6a2da6662df..000000000000
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ /dev/null
@@ -1,263 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-// arch/arm/mach-orion5x/wrt350n-v2-setup.c
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/platform_data/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include "orion5x.h"
-#include "common.h"
-#include "mpp.h"
-
-/*
- * LEDs attached to GPIO
- */
-static struct gpio_led wrt350n_v2_led_pins[] = {
-	{
-		.name		= "wrt350nv2:green:power",
-		.gpio		= 0,
-		.active_low	= 1,
-	}, {
-		.name		= "wrt350nv2:green:security",
-		.gpio		= 1,
-		.active_low	= 1,
-	}, {
-		.name		= "wrt350nv2:orange:power",
-		.gpio		= 5,
-		.active_low	= 1,
-	}, {
-		.name		= "wrt350nv2:green:usb",
-		.gpio		= 6,
-		.active_low	= 1,
-	}, {
-		.name		= "wrt350nv2:green:wireless",
-		.gpio		= 7,
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_led_platform_data wrt350n_v2_led_data = {
-	.leds		= wrt350n_v2_led_pins,
-	.num_leds	= ARRAY_SIZE(wrt350n_v2_led_pins),
-};
-
-static struct platform_device wrt350n_v2_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &wrt350n_v2_led_data,
-	},
-};
-
-/*
- * Buttons attached to GPIO
- */
-static struct gpio_keys_button wrt350n_v2_buttons[] = {
-	{
-		.code		= KEY_RESTART,
-		.gpio		= 3,
-		.desc		= "Reset Button",
-		.active_low	= 1,
-	}, {
-		.code		= KEY_WPS_BUTTON,
-		.gpio		= 2,
-		.desc		= "WPS Button",
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data wrt350n_v2_button_data = {
-	.buttons	= wrt350n_v2_buttons,
-	.nbuttons	= ARRAY_SIZE(wrt350n_v2_buttons),
-};
-
-static struct platform_device wrt350n_v2_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &wrt350n_v2_button_data,
-	},
-};
-
-/*
- * General setup
- */
-static unsigned int wrt350n_v2_mpp_modes[] __initdata = {
-	MPP0_GPIO,		/* Power LED green (0=on) */
-	MPP1_GPIO,		/* Security LED (0=on) */
-	MPP2_GPIO,		/* Internal Button (0=on) */
-	MPP3_GPIO,		/* Reset Button (0=on) */
-	MPP4_GPIO,		/* PCI int */
-	MPP5_GPIO,		/* Power LED orange (0=on) */
-	MPP6_GPIO,		/* USB LED (0=on) */
-	MPP7_GPIO,		/* Wireless LED (0=on) */
-	MPP8_UNUSED,		/* ??? */
-	MPP9_GIGE,		/* GE_RXERR */
-	MPP10_UNUSED,		/* ??? */
-	MPP11_UNUSED,		/* ??? */
-	MPP12_GIGE,		/* GE_TXD[4] */
-	MPP13_GIGE,		/* GE_TXD[5] */
-	MPP14_GIGE,		/* GE_TXD[6] */
-	MPP15_GIGE,		/* GE_TXD[7] */
-	MPP16_GIGE,		/* GE_RXD[4] */
-	MPP17_GIGE,		/* GE_RXD[5] */
-	MPP18_GIGE,		/* GE_RXD[6] */
-	MPP19_GIGE,		/* GE_RXD[7] */
-	0,
-};
-
-/*
- * 8M NOR flash Device bus boot chip select
- */
-#define WRT350N_V2_NOR_BOOT_BASE	0xf4000000
-#define WRT350N_V2_NOR_BOOT_SIZE	SZ_8M
-
-static struct mtd_partition wrt350n_v2_nor_flash_partitions[] = {
-	{
-		.name		= "kernel",
-		.offset		= 0x00000000,
-		.size		= 0x00760000,
-	}, {
-		.name		= "rootfs",
-		.offset		= 0x001a0000,
-		.size		= 0x005c0000,
-	}, {
-		.name		= "lang",
-		.offset		= 0x00760000,
-		.size		= 0x00040000,
-	}, {
-		.name		= "nvram",
-		.offset		= 0x007a0000,
-		.size		= 0x00020000,
-	}, {
-		.name		= "u-boot",
-		.offset		= 0x007c0000,
-		.size		= 0x00040000,
-	},
-};
-
-static struct physmap_flash_data wrt350n_v2_nor_flash_data = {
-	.width		= 1,
-	.parts		= wrt350n_v2_nor_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(wrt350n_v2_nor_flash_partitions),
-};
-
-static struct resource wrt350n_v2_nor_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-	.start		= WRT350N_V2_NOR_BOOT_BASE,
-	.end		= WRT350N_V2_NOR_BOOT_BASE + WRT350N_V2_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device wrt350n_v2_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &wrt350n_v2_nor_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &wrt350n_v2_nor_flash_resource,
-};
-
-static struct mv643xx_eth_platform_data wrt350n_v2_eth_data = {
-	.phy_addr	= MV643XX_ETH_PHY_NONE,
-	.speed		= SPEED_1000,
-	.duplex		= DUPLEX_FULL,
-};
-
-static struct dsa_chip_data wrt350n_v2_switch_chip_data = {
-	.port_names[0]	= "lan2",
-	.port_names[1]	= "lan1",
-	.port_names[2]	= "wan",
-	.port_names[3]	= "cpu",
-	.port_names[5]	= "lan3",
-	.port_names[7]	= "lan4",
-};
-
-static void __init wrt350n_v2_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(wrt350n_v2_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_eth_init(&wrt350n_v2_eth_data);
-	orion5x_eth_switch_init(&wrt350n_v2_switch_chip_data);
-	orion5x_uart0_init();
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-				    ORION_MBUS_DEVBUS_BOOT_ATTR,
-				    WRT350N_V2_NOR_BOOT_BASE,
-				    WRT350N_V2_NOR_BOOT_SIZE);
-	platform_device_register(&wrt350n_v2_nor_flash);
-	platform_device_register(&wrt350n_v2_leds);
-	platform_device_register(&wrt350n_v2_button_device);
-}
-
-static int __init wrt350n_v2_pci_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	int irq;
-
-	/*
-	 * Check for devices with hard-wired IRQs.
-	 */
-	irq = orion5x_pci_map_irq(dev, slot, pin);
-	if (irq != -1)
-		return irq;
-
-	/*
-	 * Mini-PCI slot.
-	 */
-	if (slot == 7)
-		return gpio_to_irq(4);
-
-	return -1;
-}
-
-static struct hw_pci wrt350n_v2_pci __initdata = {
-	.nr_controllers	= 2,
-	.setup		= orion5x_pci_sys_setup,
-	.scan		= orion5x_pci_sys_scan_bus,
-	.map_irq	= wrt350n_v2_pci_map_irq,
-};
-
-static int __init wrt350n_v2_pci_init(void)
-{
-	if (machine_is_wrt350n_v2())
-		pci_common_init(&wrt350n_v2_pci);
-
-	return 0;
-}
-subsys_initcall(wrt350n_v2_pci_init);
-
-MACHINE_START(WRT350N_V2, "Linksys WRT350N v2")
-	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= ORION5X_NR_IRQS,
-	.init_machine	= wrt350n_v2_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 03e25af6f48c..10e472f4fa43 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -16,10 +16,6 @@ menuconfig ARCH_PXA
 
 if ARCH_PXA
 
-menu "Intel PXA2xx/PXA3xx Implementations"
-
-comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
-
 config MACH_PXA25X_DT
 	bool "Support PXA25x platforms from device tree"
 	select PINCTRL
@@ -58,115 +54,7 @@ config MACH_PXA3XX_DT
 
 if ATAGS
 
-config ARCH_LUBBOCK
-	bool "Intel DBPXA250 Development Platform (aka Lubbock)"
-	depends on UNUSED_BOARD_FILES
-	select GPIO_REG
-	select PXA25x
-	select SA1111
-
-config MACH_MAINSTONE
-	bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
-	depends on UNUSED_BOARD_FILES
-	select GPIO_REG
-	select PXA27x
-
-config MACH_ZYLONITE
-	bool
-	select PXA3xx
-
-config MACH_ZYLONITE300
-	bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA300
-	select CPU_PXA310
-	select MACH_ZYLONITE
-
-config MACH_ZYLONITE320
-	bool "PXA3xx Development Platform (aka Zylonite) PXA320"
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA320
-	select MACH_ZYLONITE
-
-config MACH_LITTLETON
-	bool "PXA3xx Form Factor Platform (aka Littleton)"
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA300
-	select CPU_PXA310
-	select PXA3xx
-
-config MACH_TAVOREVB
-	bool "PXA930 Evaluation Board (aka TavorEVB)"
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA930
-	select CPU_PXA935
-	select PXA3xx
-	select FB
-	select FB_PXA
-
-config MACH_SAAR
-	bool "PXA930 Handheld Platform (aka SAAR)"
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA930
-	select CPU_PXA935
-	select PXA3xx
-	select FB
-	select FB_PXA
-
-comment "Third Party Dev Platforms (sorted by vendor name)"
-
-config ARCH_PXA_IDP
-	bool "Accelent Xscale IDP"
-	depends on UNUSED_BOARD_FILES
-	select PXA25x
-
-config ARCH_VIPER
-	bool "Arcom/Eurotech VIPER SBC"
-	depends on UNUSED_BOARD_FILES
-	select ARCOM_PCMCIA
-	select I2C_GPIO if I2C=y
-	select ISA
-	select PXA25x
-
-config MACH_ARCOM_ZEUS
-	bool "Arcom/Eurotech ZEUS SBC"
-	depends on UNUSED_BOARD_FILES
-	select ARCOM_PCMCIA
-	select ISA
-	select PXA27x
-
-config MACH_BALLOON3
-	bool "Balloon 3 board"
-	depends on UNUSED_BOARD_FILES
-	select IWMMXT
-	select PXA27x
-
-config MACH_CSB726
-	bool "Enable Cogent CSB726 System On a Module"
-	depends on UNUSED_BOARD_FILES
-	select IWMMXT
-	select PXA27x
-	help
-	  Say Y here if you intend to run this kernel on a Cogent
-	  CSB726 System On Module.
-
-config CSB726_CSB701
-	bool "Enable support for CSB701 baseboard"
-	depends on UNUSED_BOARD_FILES
-	depends on MACH_CSB726
-
-config MACH_CM_X300
-	bool "CompuLab CM-X300 modules"
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA300
-	select CPU_PXA310
-	select PXA3xx
-
-config MACH_CAPC7117
-	bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA320
-	select PXA3xx
+comment "Legacy board files"
 
 config ARCH_GUMSTIX
 	bool "Gumstix XScale 255 boards"
@@ -187,307 +75,6 @@ config GUMSTIX_AM300EPD
 
 endchoice
 
-config MACH_XCEP
-	bool "Iskratel Electronics XCEP"
-	depends on UNUSED_BOARD_FILES
-	select MTD
-	select MTD_CFI
-	select MTD_CFI_INTELEXT
-	select MTD_PHYSMAP
-	select PXA25x
-	help
-	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
-	  Tuned for usage in Libera instruments for particle accelerators.
-
-config TRIZEPS_PXA
-	bool "PXA based Keith und Koep Trizeps DIMM-Modules"
-	depends on UNUSED_BOARD_FILES
-
-config MACH_TRIZEPS4
-	bool "Keith und Koep Trizeps4 DIMM-Module"
-	depends on TRIZEPS_PXA
-	select PXA27x
-	select TRIZEPS_PCMCIA
-
-config MACH_TRIZEPS4WL
-	bool "Keith und Koep Trizeps4-WL DIMM-Module"
-	depends on TRIZEPS_PXA
-	select MACH_TRIZEPS4
-	select PXA27x
-	select TRIZEPS_PCMCIA
-
-choice
-	prompt "Select base board for Trizeps module"
-	depends on TRIZEPS_PXA
-
-config MACH_TRIZEPS_CONXS
-	bool "ConXS Eval Board"
-
-config MACH_TRIZEPS_UCONXS
-	bool "uConXS Eval Board"
-
-config MACH_TRIZEPS_ANY
-	bool "another Board"
-
-endchoice
-
-config ARCOM_PCMCIA
-	bool
-	help
-	  Generic option for Arcom Viper/Zeus PCMCIA
-
-config TRIZEPS_PCMCIA
-	bool
-	help
-	  Enable PCMCIA support for Trizeps modules
-
-config MACH_LOGICPD_PXA270
-	bool "LogicPD PXA270 Card Engine Development Platform"
-	depends on UNUSED_BOARD_FILES
-	select PXA27x
-
-config MACH_PCM027
-	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
-	depends on UNUSED_BOARD_FILES
-	select IWMMXT
-	select PXA27x
-
-config MACH_PCM990_BASEBOARD
-	bool "PHYTEC PCM-990 development board"
-	depends on UNUSED_BOARD_FILES
-	depends on MACH_PCM027
-
-choice
-	prompt "display on pcm990"
-	depends on MACH_PCM990_BASEBOARD
-
-config PCM990_DISPLAY_SHARP
-	bool "sharp lq084v1dg21 stn display"
-
-config PCM990_DISPLAY_NEC
-	bool "nec nl6448bc20_18d tft display"
-
-config PCM990_DISPLAY_NONE
-	bool "no display"
-
-endchoice
-
-config MACH_COLIBRI
-	bool "Toradex Colibri PXA270"
-	depends on UNUSED_BOARD_FILES
-	select PXA27x
-
-config MACH_COLIBRI_PXA270_INCOME
-	bool "Income s.r.o. PXA270 SBC"
-	depends on UNUSED_BOARD_FILES
-	depends on MACH_COLIBRI
-	select PXA27x
-
-config MACH_COLIBRI300
-	bool "Toradex Colibri PXA300/310"
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA300
-	select CPU_PXA310
-	select PXA3xx
-
-config MACH_COLIBRI320
-	bool "Toradex Colibri PXA320"
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA320
-	select PXA3xx
-
-config MACH_COLIBRI_EVALBOARD
-	bool "Toradex Colibri Evaluation Carrier Board support"
-	depends on UNUSED_BOARD_FILES
-	depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
-
-config MACH_VPAC270
-	bool "Voipac PXA270"
-	depends on UNUSED_BOARD_FILES
-	select HAVE_PATA_PLATFORM
-	select PXA27x
-	help
-	  PXA270 based Single Board Computer.
-
-comment "End-user Products (sorted by vendor name)"
-
-config MACH_H4700
-	bool "HP iPAQ hx4700"
-	depends on UNUSED_BOARD_FILES
-	select IWMMXT
-	select PXA27x
-
-config MACH_H5000
-	bool "HP iPAQ h5000"
-	depends on UNUSED_BOARD_FILES
-	select PXA25x
-
-config MACH_HIMALAYA
-	bool "HTC Himalaya Support"
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA26x
-
-config MACH_MAGICIAN
-	bool "Enable HTC Magician Support"
-	depends on UNUSED_BOARD_FILES
-	select IWMMXT
-	select PXA27x
-
-config MACH_MIOA701
-	bool "Mitac Mio A701 Support"
-	depends on UNUSED_BOARD_FILES
-	select IWMMXT
-	select PXA27x
-	help
-	  Say Y here if you intend to run this kernel on a
-	  MIO A701. Currently there is only basic support
-	  for this PDA.
-
-config PXA_EZX
-	bool "Motorola EZX Platform"
-	depends on UNUSED_BOARD_FILES
-	select IWMMXT
-	select PXA27x
-
-config MACH_EZX_A780
-	bool "Motorola EZX A780"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_E680
-	bool "Motorola EZX E680"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_A1200
-	bool "Motorola EZX A1200"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_A910
-	bool "Motorola EZX A910"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_E6
-	bool "Motorola EZX E6"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_E2
-	bool "Motorola EZX E2"
-	default y
-	depends on PXA_EZX
-
-config MACH_MP900C
-	bool "Nec Mobilepro 900/c"
-	depends on UNUSED_BOARD_FILES
-	select PXA25x
-
-config ARCH_PXA_PALM
-	bool "PXA based Palm PDAs"
-	depends on UNUSED_BOARD_FILES
-
-config MACH_PALM27X
-	bool
-
-config MACH_PALMTE2
-	bool "Palm Tungsten|E2"
-	depends on UNUSED_BOARD_FILES
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA25x
-	help
-	  Say Y here if you intend to run this kernel on a Palm Tungsten|E2
-	  handheld computer.
-
-config MACH_PALMTC
-	bool "Palm Tungsten|C"
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA25x
-	help
-	  Say Y here if you intend to run this kernel on a Palm Tungsten|C
-	  handheld computer.
-
-config MACH_PALMT5
-	bool "Palm Tungsten|T5"
-	depends on UNUSED_BOARD_FILES
-	default y
-	depends on ARCH_PXA_PALM
-	select IWMMXT
-	select MACH_PALM27X
-	select PXA27x
-	help
-	  Say Y here if you intend to run this kernel on a Palm Tungsten|T5
-	  handheld computer.
-
-config MACH_PALMTX
-	bool "Palm T|X"
-	depends on UNUSED_BOARD_FILES
-	default y
-	depends on ARCH_PXA_PALM
-	select IWMMXT
-	select MACH_PALM27X
-	select PXA27x
-	help
-	  Say Y here if you intend to run this kernel on a Palm T|X
-	  handheld computer.
-
-config MACH_PALMZ72
-	bool "Palm Zire 72"
-	depends on UNUSED_BOARD_FILES
-	default y
-	depends on ARCH_PXA_PALM
-	select IWMMXT
-	select MACH_PALM27X
-	select PXA27x
-	help
-	  Say Y here if you intend to run this kernel on Palm Zire 72
-	  handheld computer.
-
-config MACH_PALMLD
-	bool "Palm LifeDrive"
-	depends on UNUSED_BOARD_FILES
-	default y
-	depends on ARCH_PXA_PALM
-	select IWMMXT
-	select MACH_PALM27X
-	select PXA27x
-	help
-	  Say Y here if you intend to run this kernel on a Palm LifeDrive
-	  handheld computer.
-
-config PALM_TREO
-	bool
-	depends on ARCH_PXA_PALM
-
-config MACH_CENTRO
-	bool "Palm Centro 685 (GSM)"
-	depends on UNUSED_BOARD_FILES
-	default y
-	depends on ARCH_PXA_PALM
-	select IWMMXT
-	select MACH_PALM27X
-	select PALM_TREO
-	select PXA27x
-	help
-	  Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
-	  smartphone.
-
-config MACH_TREO680
-	bool "Palm Treo 680"
-	depends on UNUSED_BOARD_FILES
-	default y
-	depends on ARCH_PXA_PALM
-	select IWMMXT
-	select MACH_PALM27X
-	select PALM_TREO
-	select PXA27x
-	help
-	  Say Y here if you intend to run this kernel on Palm Treo 680
-	  smartphone.
-
 config PXA_SHARPSL
 	bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
 	select SHARP_PARAM
@@ -507,34 +94,6 @@ config PXA_SHARPSL_DETECT_MACH_ID
 	  the Zaurus machine ID at run-time. For latest kexec-based
 	  boot loader, this is not necessary.
 
-config MACH_POODLE
-	bool "Enable Sharp SL-5600 (Poodle) Support"
-	depends on PXA_SHARPSL
-	depends on UNUSED_BOARD_FILES
-	select PXA25x
-	select SHARP_LOCOMO
-
-config MACH_CORGI
-	bool "Enable Sharp SL-C700 (Corgi) Support"
-	depends on PXA_SHARPSL
-	depends on UNUSED_BOARD_FILES
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_SHEPHERD
-	bool "Enable Sharp SL-C750 (Shepherd) Support"
-	depends on PXA_SHARPSL
-	depends on UNUSED_BOARD_FILES
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_HUSKY
-	bool "Enable Sharp SL-C760 (Husky) Support"
-	depends on PXA_SHARPSL
-	depends on UNUSED_BOARD_FILES
-	select PXA25x
-	select PXA_SHARP_C7xx
-
 config MACH_AKITA
 	bool "Enable Sharp SL-1000 (Akita) Support"
 	depends on PXA_SHARPSL
@@ -556,98 +115,7 @@ config MACH_BORZOI
 	select PXA27x
 	select PXA_SHARP_Cxx00
 
-config MACH_TOSA
-	bool "Enable Sharp SL-6000x (Tosa) Support"
-	depends on UNUSED_BOARD_FILES
-	depends on PXA_SHARPSL
-	select PXA25x
-
-config TOSA_BT
-	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
-	depends on MACH_TOSA && NET
-	select RFKILL
-	help
-	  This is a simple driver that is able to control
-	  the state of built in bluetooth chip on tosa.
-
-config TOSA_USE_EXT_KEYCODES
-	bool "Tosa keyboard: use extended keycodes"
-	depends on MACH_TOSA
-	help
-	  Say Y here to enable the tosa keyboard driver to generate extended
-	  (>= 127) keycodes. Be aware, that they can't be correctly interpreted
-	  by either console keyboard driver or by Kdrive keybd driver.
-
-	  Say Y only if you know, what you are doing!
-
-config MACH_ICONTROL
-	bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
-	depends on UNUSED_BOARD_FILES
-	select CPU_PXA320
-	select PXA3xx
-
-config ARCH_PXA_ESERIES
-	bool "PXA based Toshiba e-series PDAs"
-	depends on UNUSED_BOARD_FILES
-	select FB_W100
-	select FB
-	select PXA25x
-
-config MACH_E330
-	bool "Toshiba e330"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e330 family PDA.
-
-config MACH_E350
-	bool "Toshiba e350"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e350 family PDA.
-
-config MACH_E740
-	bool "Toshiba e740"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e740 family PDA.
-
-config MACH_E750
-	bool "Toshiba e750"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e750 family PDA.
-
-config MACH_E400
-	bool "Toshiba e400"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e400 family PDA.
-
-config MACH_E800
-	bool "Toshiba e800"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e800 family PDA.
-
-config MACH_ZIPIT2
-	bool "Zipit Z2 Handheld"
-	depends on UNUSED_BOARD_FILES
-	select PXA27x
-
 endif # ATAGS
-endmenu
 
 config PXA25x
 	bool
@@ -661,12 +129,6 @@ config PXA27x
 	help
 	  Select code specific to PXA27x variants
 
-config CPU_PXA26x
-	bool
-	select PXA25x
-	help
-	  Select code specific to PXA26x (codename Dalhart)
-
 config PXA3xx
 	bool
 	select CPU_XSC3
@@ -682,7 +144,6 @@ config CPU_PXA300
 config CPU_PXA310
 	bool
 	select CPU_PXA300
-	select PXA310_ULPI if USB_ULPI
 	help
 	  PXA310 (codename Monahans-LV)
 
@@ -692,24 +153,6 @@ config CPU_PXA320
 	help
 	  PXA320 (codename Monahans-P)
 
-config CPU_PXA930
-	bool
-	select PXA3xx
-	help
-	  PXA930 (codename Tavor-P)
-
-config CPU_PXA935
-	bool
-	select CPU_PXA930
-	help
-	  PXA935 (codename Tavor-P65)
-
-config PXA_SHARP_C7xx
-	bool
-	select SHARPSL_PM
-	help
-	  Enable support for all Sharp C7xx models
-
 config PXA_SHARP_Cxx00
 	bool
 	select SHARPSL_PM
@@ -728,16 +171,4 @@ config SHARPSL_PM_MAX1111
 	select SPI
 	select SPI_MASTER
 
-config PXA310_ULPI
-	bool
-
-config PXA_SYSTEMS_CPLDS
-	tristate "Motherboard cplds"
-	default ARCH_LUBBOCK || MACH_MAINSTONE
-	help
-	  This driver supports the Lubbock and Mainstone multifunction chip
-	  found on the pxa25x development platform system (Lubbock) and pxa27x
-	  development platform system (Mainstone). This IO board supports the
-	  interrupts handling, ethernet controller, flash chips, etc ...
-
 endif
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 0aec36e67dc1..faccdd356482 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -12,10 +12,9 @@ obj-$(CONFIG_PM)		+= pm.o sleep.o standby.o
 # SoC-specific code
 obj-$(CONFIG_PXA25x)		+= mfp-pxa2xx.o pxa2xx.o pxa25x.o
 obj-$(CONFIG_PXA27x)		+= mfp-pxa2xx.o pxa2xx.o pxa27x.o
-obj-$(CONFIG_PXA3xx)		+= mfp-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
+obj-$(CONFIG_PXA3xx)		+= mfp-pxa3xx.o pxa3xx.o smemc.o
 obj-$(CONFIG_CPU_PXA300)	+= pxa300.o
 obj-$(CONFIG_CPU_PXA320)	+= pxa320.o
-obj-$(CONFIG_CPU_PXA930)	+= pxa930.o
 
 # NOTE: keep the order of boards in accordance to their order in Kconfig
 
@@ -24,66 +23,10 @@ obj-$(CONFIG_MACH_PXA25X_DT)	+= pxa-dt.o
 obj-$(CONFIG_MACH_PXA27X_DT)	+= pxa-dt.o
 obj-$(CONFIG_MACH_PXA3XX_DT)	+= pxa-dt.o
 
-# Intel/Marvell Dev Platforms
-obj-$(CONFIG_ARCH_LUBBOCK)	+= lubbock.o
-obj-$(CONFIG_MACH_MAINSTONE)	+= mainstone.o
-obj-$(CONFIG_MACH_ZYLONITE300)	+= zylonite.o zylonite_pxa300.o
-obj-$(CONFIG_MACH_ZYLONITE320)	+= zylonite.o zylonite_pxa320.o
-obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
-obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
-obj-$(CONFIG_MACH_SAAR)		+= saar.o
-
 # 3rd Party Dev Platforms
-obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
-obj-$(CONFIG_ARCH_VIPER)	+= viper.o
-obj-$(CONFIG_MACH_ARCOM_ZEUS)	+= zeus.o
-obj-$(CONFIG_ARCOM_PCMCIA)	+= viper-pcmcia.o
-obj-$(CONFIG_MACH_BALLOON3)	+= balloon3.o balloon3-pcmcia.o
-obj-$(CONFIG_MACH_CSB726)	+= csb726.o
-obj-$(CONFIG_CSB726_CSB701)	+= csb701.o
-obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
-obj-$(CONFIG_MACH_CAPC7117)     += capc7117.o mxm8x10.o
 obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
 obj-$(CONFIG_GUMSTIX_AM200EPD)	+= am200epd.o
 obj-$(CONFIG_GUMSTIX_AM300EPD)	+= am300epd.o
-obj-$(CONFIG_MACH_XCEP)         += xcep.o
-obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
-obj-$(CONFIG_TRIZEPS_PCMCIA)	+= trizeps4-pcmcia.o
-obj-$(CONFIG_MACH_LOGICPD_PXA270)	+= lpd270.o
-obj-$(CONFIG_MACH_PCM027)		+= pcm027.o
-obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
-obj-$(CONFIG_MACH_COLIBRI)		+= colibri-pxa270.o colibri-pcmcia.o
-obj-$(CONFIG_MACH_COLIBRI_EVALBOARD)	+= colibri-evalboard.o
-obj-$(CONFIG_MACH_COLIBRI_PXA270_INCOME)	+= colibri-pxa270-income.o
-obj-$(CONFIG_MACH_COLIBRI300)	+= colibri-pxa3xx.o colibri-pxa300.o
-obj-$(CONFIG_MACH_COLIBRI320)	+= colibri-pxa3xx.o colibri-pxa320.o colibri-pcmcia.o
-obj-$(CONFIG_MACH_VPAC270)	+= vpac270.o vpac270-pcmcia.o
 
 # End-user Products
-obj-$(CONFIG_MACH_H4700)	+= hx4700.o
-obj-$(CONFIG_MACH_H4700)	+= hx4700-pcmcia.o
-obj-$(CONFIG_MACH_H5000)	+= h5000.o
-obj-$(CONFIG_MACH_HIMALAYA)	+= himalaya.o
-obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
-obj-$(CONFIG_MACH_MIOA701)	+= mioa701.o mioa701_bootresume.o
-obj-$(CONFIG_PXA_EZX)           += ezx.o
-obj-$(CONFIG_MACH_MP900C)	+= mp900.o
-obj-$(CONFIG_MACH_PALMTE2)	+= palmte2.o
-obj-$(CONFIG_MACH_PALMTC)	+= palmtc.o palmtc-pcmcia.o
-obj-$(CONFIG_MACH_PALM27X)	+= palm27x.o
-obj-$(CONFIG_MACH_PALMT5)	+= palmt5.o
-obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o palmtx-pcmcia.o
-obj-$(CONFIG_MACH_PALMZ72)	+= palmz72.o
-obj-$(CONFIG_MACH_PALMLD)	+= palmld.o palmld-pcmcia.o
-obj-$(CONFIG_PALM_TREO)		+= palmtreo.o
-obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o sharpsl_pm.o corgi_pm.o
 obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o sharpsl_pm.o spitz_pm.o
-obj-$(CONFIG_MACH_POODLE)	+= poodle.o
-obj-$(CONFIG_MACH_TOSA)		+= tosa.o
-obj-$(CONFIG_MACH_ICONTROL)     += icontrol.o mxm8x10.o
-obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
-obj-$(CONFIG_MACH_E740)		+= e740-pcmcia.o
-obj-$(CONFIG_MACH_ZIPIT2)	+= z2.o
-
-obj-$(CONFIG_PXA_SYSTEMS_CPLDS)	+= pxa_cplds_irqs.o
-obj-$(CONFIG_TOSA_BT)		+= tosa-bt.o
diff --git a/arch/arm/mach-pxa/balloon3-pcmcia.c b/arch/arm/mach-pxa/balloon3-pcmcia.c
deleted file mode 100644
index 6a27b76cc603..000000000000
--- a/arch/arm/mach-pxa/balloon3-pcmcia.c
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa2xx_balloon3.c
- *
- * Balloon3 PCMCIA specific routines.
- *
- *  Author:	Nick Bane
- *  Created:	June, 2006
- *  Copyright:	Toby Churchill Ltd
- *  Derived from pxa2xx_mainstone.c, by Nico Pitre
- *
- * Various modification by Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include "balloon3.h"
-
-#include <asm/mach-types.h>
-
-#include <pcmcia/soc_common.h>
-
-static int balloon3_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	uint16_t ver;
-
-	ver = __raw_readw(BALLOON3_FPGA_VER);
-	if (ver < 0x4f08)
-		pr_warn("The FPGA code, version 0x%04x, is too old. "
-			"PCMCIA/CF support might be broken in this version!",
-			ver);
-
-	skt->socket.pci_irq = BALLOON3_BP_CF_NRDY_IRQ;
-	skt->stat[SOC_STAT_CD].gpio = BALLOON3_GPIO_S0_CD;
-	skt->stat[SOC_STAT_CD].name = "PCMCIA0 CD";
-	skt->stat[SOC_STAT_BVD1].irq = BALLOON3_BP_NSTSCHG_IRQ;
-	skt->stat[SOC_STAT_BVD1].name = "PCMCIA0 STSCHG";
-
-	return 0;
-}
-
-static unsigned long balloon3_pcmcia_status[2] = {
-	BALLOON3_CF_nSTSCHG_BVD1,
-	BALLOON3_CF_nSTSCHG_BVD1
-};
-
-static void balloon3_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-				    struct pcmcia_state *state)
-{
-	uint16_t status;
-	int flip;
-
-	/* This actually reads the STATUS register */
-	status = __raw_readw(BALLOON3_CF_STATUS_REG);
-	flip = (status ^ balloon3_pcmcia_status[skt->nr])
-		& BALLOON3_CF_nSTSCHG_BVD1;
-	/*
-	 * Workaround for STSCHG which can't be deasserted:
-	 * We therefore disable/enable corresponding IRQs
-	 * as needed to avoid IRQ locks.
-	 */
-	if (flip) {
-		balloon3_pcmcia_status[skt->nr] = status;
-		if (status & BALLOON3_CF_nSTSCHG_BVD1)
-			enable_irq(BALLOON3_BP_NSTSCHG_IRQ);
-		else
-			disable_irq(BALLOON3_BP_NSTSCHG_IRQ);
-	}
-
-	state->ready	= !!(status & BALLOON3_CF_nIRQ);
-	state->bvd1	= !!(status & BALLOON3_CF_nSTSCHG_BVD1);
-	state->bvd2	= 0;	/* not available */
-	state->vs_3v	= 1;	/* Always true its a CF card */
-	state->vs_Xv	= 0;	/* not available */
-}
-
-static int balloon3_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-				       const socket_state_t *state)
-{
-	__raw_writew(BALLOON3_CF_RESET, BALLOON3_CF_CONTROL_REG +
-			((state->flags & SS_RESET) ?
-			BALLOON3_FPGA_SETnCLR : 0));
-	return 0;
-}
-
-static struct pcmcia_low_level balloon3_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-	.hw_init		= balloon3_pcmcia_hw_init,
-	.socket_state		= balloon3_pcmcia_socket_state,
-	.configure_socket	= balloon3_pcmcia_configure_socket,
-	.first			= 0,
-	.nr			= 1,
-};
-
-static struct platform_device *balloon3_pcmcia_device;
-
-static int __init balloon3_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_balloon3())
-		return -ENODEV;
-
-	balloon3_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!balloon3_pcmcia_device)
-		return -ENOMEM;
-
-	ret = platform_device_add_data(balloon3_pcmcia_device,
-			&balloon3_pcmcia_ops, sizeof(balloon3_pcmcia_ops));
-
-	if (!ret)
-		ret = platform_device_add(balloon3_pcmcia_device);
-
-	if (ret)
-		platform_device_put(balloon3_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit balloon3_pcmcia_exit(void)
-{
-	platform_device_unregister(balloon3_pcmcia_device);
-}
-
-module_init(balloon3_pcmcia_init);
-module_exit(balloon3_pcmcia_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Nick Bane <nick@cecomputing.co.uk>");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
-MODULE_DESCRIPTION("Balloon3 board CF/PCMCIA driver");
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
deleted file mode 100644
index 896d47d9a8dc..000000000000
--- a/arch/arm/mach-pxa/balloon3.c
+++ /dev/null
@@ -1,821 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/balloon3.c
- *
- *  Support for Balloonboard.org Balloon3 board.
- *
- *  Author:	Nick Bane, Wookey, Jonathan McDowell
- *  Created:	June, 2006
- *  Copyright:	Toby Churchill Ltd
- *  Derived from mainstone.c, by Nico Pitre
- */
-
-#include <linux/export.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/leds.h>
-#include <linux/sched.h>
-#include <linux/bitops.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/ioport.h>
-#include <linux/ucb1400.h>
-#include <linux/mtd/mtd.h>
-#include <linux/types.h>
-#include <linux/platform_data/pcf857x.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/mtd/platnand.h>
-#include <linux/mtd/physmap.h>
-#include <linux/regulator/max1586.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <linux/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include "pxa27x.h"
-#include "balloon3.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include "udc.h"
-#include "pxa27x-udc.h"
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long balloon3_pin_config[] __initdata = {
-	/* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* Reset, configured as GPIO wakeup source */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
-};
-
-/******************************************************************************
- * Compatibility: Parameter parsing
- ******************************************************************************/
-static unsigned long balloon3_irq_enabled;
-
-static unsigned long balloon3_features_present =
-		(1 << BALLOON3_FEATURE_OHCI) | (1 << BALLOON3_FEATURE_CF) |
-		(1 << BALLOON3_FEATURE_AUDIO) |
-		(1 << BALLOON3_FEATURE_TOPPOLY);
-
-int balloon3_has(enum balloon3_features feature)
-{
-	return (balloon3_features_present & (1 << feature)) ? 1 : 0;
-}
-EXPORT_SYMBOL_GPL(balloon3_has);
-
-int __init parse_balloon3_features(char *arg)
-{
-	if (!arg)
-		return 0;
-
-	return kstrtoul(arg, 0, &balloon3_features_present);
-}
-early_param("balloon3_features", parse_balloon3_features);
-
-/******************************************************************************
- * Compact Flash slot
- ******************************************************************************/
-#if	defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE)
-static unsigned long balloon3_cf_pin_config[] __initdata = {
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO79_PSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-};
-
-static void __init balloon3_cf_init(void)
-{
-	if (!balloon3_has(BALLOON3_FEATURE_CF))
-		return;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_cf_pin_config));
-}
-#else
-static inline void balloon3_cf_init(void) {}
-#endif
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition balloon3_nor_partitions[] = {
-	{
-		.name		= "Flash",
-		.offset		= 0x00000000,
-		.size		= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct physmap_flash_data balloon3_flash_data[] = {
-	{
-		.width		= 2,	/* bankwidth in bytes */
-		.parts		= balloon3_nor_partitions,
-		.nr_parts	= ARRAY_SIZE(balloon3_nor_partitions)
-	}
-};
-
-static struct resource balloon3_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_64M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device balloon3_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= &balloon3_flash_resource,
-	.num_resources	= 1,
-	.dev 		= {
-		.platform_data = balloon3_flash_data,
-	},
-};
-static void __init balloon3_nor_init(void)
-{
-	platform_device_register(&balloon3_flash);
-}
-#else
-static inline void balloon3_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * Audio and Touchscreen
- ******************************************************************************/
-#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
-	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
-static unsigned long balloon3_ac97_pin_config[] __initdata = {
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO113_AC97_nRESET,
-	GPIO95_GPIO,
-};
-
-static struct ucb1400_pdata vpac270_ucb1400_pdata = {
-	.irq		= PXA_GPIO_TO_IRQ(BALLOON3_GPIO_CODEC_IRQ),
-};
-
-
-static struct platform_device balloon3_ucb1400_device = {
-	.name		= "ucb1400_core",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &vpac270_ucb1400_pdata,
-	},
-};
-
-static void __init balloon3_ts_init(void)
-{
-	if (!balloon3_has(BALLOON3_FEATURE_AUDIO))
-		return;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ac97_pin_config));
-	pxa_set_ac97_info(NULL);
-	platform_device_register(&balloon3_ucb1400_device);
-}
-#else
-static inline void balloon3_ts_init(void) {}
-#endif
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static unsigned long balloon3_lcd_pin_config[] __initdata = {
-	GPIOxx_LCD_TFT_16BPP,
-	GPIO99_GPIO,
-};
-
-static struct pxafb_mode_info balloon3_lcd_modes[] = {
-	{
-		.pixclock		= 38000,
-		.xres			= 480,
-		.yres			= 640,
-		.bpp			= 16,
-		.hsync_len		= 8,
-		.left_margin		= 8,
-		.right_margin		= 8,
-		.vsync_len		= 2,
-		.upper_margin		= 4,
-		.lower_margin		= 5,
-		.sync			= 0,
-	},
-};
-
-static struct pxafb_mach_info balloon3_lcd_screen = {
-	.modes			= balloon3_lcd_modes,
-	.num_modes		= ARRAY_SIZE(balloon3_lcd_modes),
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static void balloon3_backlight_power(int on)
-{
-	gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
-}
-
-static void __init balloon3_lcd_init(void)
-{
-	int ret;
-
-	if (!balloon3_has(BALLOON3_FEATURE_TOPPOLY))
-		return;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
-
-	ret = gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT, "BKL-ON");
-	if (ret) {
-		pr_err("Requesting BKL-ON GPIO failed!\n");
-		goto err;
-	}
-
-	ret = gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1);
-	if (ret) {
-		pr_err("Setting BKL-ON GPIO direction failed!\n");
-		goto err2;
-	}
-
-	balloon3_lcd_screen.pxafb_backlight_power = balloon3_backlight_power;
-	pxa_set_fb_info(NULL, &balloon3_lcd_screen);
-	return;
-
-err2:
-	gpio_free(BALLOON3_GPIO_RUN_BACKLIGHT);
-err:
-	return;
-}
-#else
-static inline void balloon3_lcd_init(void) {}
-#endif
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static unsigned long balloon3_mmc_pin_config[] __initdata = {
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-};
-
-static struct pxamci_platform_data balloon3_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.detect_delay_ms	= 200,
-};
-
-static void __init balloon3_mmc_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config));
-	pxa_set_mci_info(&balloon3_mci_platform_data);
-}
-#else
-static inline void balloon3_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Gadget
- ******************************************************************************/
-#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
-static void balloon3_udc_command(int cmd)
-{
-	if (cmd == PXA2XX_UDC_CMD_CONNECT)
-		UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE;
-	else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
-		UP2OCR &= ~UP2OCR_DPPUE;
-}
-
-static int balloon3_udc_is_connected(void)
-{
-	return 1;
-}
-
-static struct pxa2xx_udc_mach_info balloon3_udc_info __initdata = {
-	.udc_command		= balloon3_udc_command,
-	.udc_is_connected	= balloon3_udc_is_connected,
-	.gpio_pullup		= -1,
-};
-
-static void __init balloon3_udc_init(void)
-{
-	pxa_set_udc_info(&balloon3_udc_info);
-}
-#else
-static inline void balloon3_udc_init(void) {}
-#endif
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
-static struct pxaficp_platform_data balloon3_ficp_platform_data = {
-	.transceiver_cap	= IR_FIRMODE | IR_SIRMODE | IR_OFF,
-};
-
-static void __init balloon3_irda_init(void)
-{
-	pxa_set_ficp_info(&balloon3_ficp_platform_data);
-}
-#else
-static inline void balloon3_irda_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Host
- ******************************************************************************/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static unsigned long balloon3_uhc_pin_config[] __initdata = {
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-};
-
-static struct pxaohci_platform_data balloon3_ohci_info = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-static void __init balloon3_uhc_init(void)
-{
-	if (!balloon3_has(BALLOON3_FEATURE_OHCI))
-		return;
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_uhc_pin_config));
-	pxa_set_ohci_info(&balloon3_ohci_info);
-}
-#else
-static inline void balloon3_uhc_init(void) {}
-#endif
-
-/******************************************************************************
- * LEDs
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static unsigned long balloon3_led_pin_config[] __initdata = {
-	GPIO9_GPIO,	/* NAND activity LED */
-	GPIO10_GPIO,	/* Heartbeat LED */
-};
-
-struct gpio_led balloon3_gpio_leds[] = {
-	{
-		.name			= "balloon3:green:idle",
-		.default_trigger	= "heartbeat",
-		.gpio			= BALLOON3_GPIO_LED_IDLE,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:green:nand",
-		.default_trigger	= "nand-disk",
-		.gpio			= BALLOON3_GPIO_LED_NAND,
-		.active_low		= 1,
-	},
-};
-
-static struct gpio_led_platform_data balloon3_gpio_led_info = {
-	.leds		= balloon3_gpio_leds,
-	.num_leds	= ARRAY_SIZE(balloon3_gpio_leds),
-};
-
-static struct platform_device balloon3_leds = {
-	.name	= "leds-gpio",
-	.id	= 0,
-	.dev	= {
-		.platform_data	= &balloon3_gpio_led_info,
-	}
-};
-
-struct gpio_led balloon3_pcf_gpio_leds[] = {
-	{
-		.name			= "balloon3:green:led0",
-		.gpio			= BALLOON3_PCF_GPIO_LED0,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:green:led1",
-		.gpio			= BALLOON3_PCF_GPIO_LED1,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:orange:led2",
-		.gpio			= BALLOON3_PCF_GPIO_LED2,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:orange:led3",
-		.gpio			= BALLOON3_PCF_GPIO_LED3,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:orange:led4",
-		.gpio			= BALLOON3_PCF_GPIO_LED4,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:orange:led5",
-		.gpio			= BALLOON3_PCF_GPIO_LED5,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:red:led6",
-		.gpio			= BALLOON3_PCF_GPIO_LED6,
-		.active_low		= 1,
-	}, {
-		.name			= "balloon3:red:led7",
-		.gpio			= BALLOON3_PCF_GPIO_LED7,
-		.active_low		= 1,
-	},
-};
-
-static struct gpio_led_platform_data balloon3_pcf_gpio_led_info = {
-	.leds		= balloon3_pcf_gpio_leds,
-	.num_leds	= ARRAY_SIZE(balloon3_pcf_gpio_leds),
-};
-
-static struct platform_device balloon3_pcf_leds = {
-	.name	= "leds-gpio",
-	.id	= 1,
-	.dev	= {
-		.platform_data	= &balloon3_pcf_gpio_led_info,
-	}
-};
-
-static void __init balloon3_leds_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_led_pin_config));
-	platform_device_register(&balloon3_leds);
-	platform_device_register(&balloon3_pcf_leds);
-}
-#else
-static inline void balloon3_leds_init(void) {}
-#endif
-
-/******************************************************************************
- * FPGA IRQ
- ******************************************************************************/
-static void balloon3_mask_irq(struct irq_data *d)
-{
-	int balloon3_irq = (d->irq - BALLOON3_IRQ(0));
-	balloon3_irq_enabled &= ~(1 << balloon3_irq);
-	__raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
-}
-
-static void balloon3_unmask_irq(struct irq_data *d)
-{
-	int balloon3_irq = (d->irq - BALLOON3_IRQ(0));
-	balloon3_irq_enabled |= (1 << balloon3_irq);
-	__raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
-}
-
-static struct irq_chip balloon3_irq_chip = {
-	.name		= "FPGA",
-	.irq_ack	= balloon3_mask_irq,
-	.irq_mask	= balloon3_mask_irq,
-	.irq_unmask	= balloon3_unmask_irq,
-};
-
-static void balloon3_irq_handler(struct irq_desc *desc)
-{
-	unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
-					balloon3_irq_enabled;
-	do {
-		struct irq_data *d = irq_desc_get_irq_data(desc);
-		struct irq_chip *chip = irq_desc_get_chip(desc);
-		unsigned int irq;
-
-		/* clear useless edge notification */
-		if (chip->irq_ack)
-			chip->irq_ack(d);
-
-		while (pending) {
-			irq = BALLOON3_IRQ(0) + __ffs(pending);
-			generic_handle_irq(irq);
-			pending &= pending - 1;
-		}
-		pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
-				balloon3_irq_enabled;
-	} while (pending);
-}
-
-static void __init balloon3_init_irq(void)
-{
-	int irq;
-
-	pxa27x_init_irq();
-	/* setup extra Balloon3 irqs */
-	for (irq = BALLOON3_IRQ(0); irq <= BALLOON3_IRQ(7); irq++) {
-		irq_set_chip_and_handler(irq, &balloon3_irq_chip,
-					 handle_level_irq);
-		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
-	}
-
-	irq_set_chained_handler(BALLOON3_AUX_NIRQ, balloon3_irq_handler);
-	irq_set_irq_type(BALLOON3_AUX_NIRQ, IRQ_TYPE_EDGE_FALLING);
-
-	pr_debug("%s: chained handler installed - irq %d automatically "
-		"enabled\n", __func__, BALLOON3_AUX_NIRQ);
-}
-
-/******************************************************************************
- * GPIO expander
- ******************************************************************************/
-#if defined(CONFIG_GPIO_PCF857X) || defined(CONFIG_GPIO_PCF857X_MODULE)
-static struct pcf857x_platform_data balloon3_pcf857x_pdata = {
-	.gpio_base	= BALLOON3_PCF_GPIO_BASE,
-	.n_latch	= 0,
-	.setup		= NULL,
-	.teardown	= NULL,
-	.context	= NULL,
-};
-
-static struct i2c_board_info __initdata balloon3_i2c_devs[] = {
-	{
-		I2C_BOARD_INFO("pcf8574a", 0x38),
-		.platform_data	= &balloon3_pcf857x_pdata,
-	},
-};
-
-static void __init balloon3_i2c_init(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(balloon3_i2c_devs));
-}
-#else
-static inline void balloon3_i2c_init(void) {}
-#endif
-
-/******************************************************************************
- * NAND
- ******************************************************************************/
-#if defined(CONFIG_MTD_NAND_PLATFORM)||defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
-static void balloon3_nand_cmd_ctl(struct nand_chip *this, int cmd,
-				  unsigned int ctrl)
-{
-	uint8_t balloon3_ctl_set = 0, balloon3_ctl_clr = 0;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		if (ctrl & NAND_CLE)
-			balloon3_ctl_set |= BALLOON3_NAND_CONTROL_FLCLE;
-		else
-			balloon3_ctl_clr |= BALLOON3_NAND_CONTROL_FLCLE;
-
-		if (ctrl & NAND_ALE)
-			balloon3_ctl_set |= BALLOON3_NAND_CONTROL_FLALE;
-		else
-			balloon3_ctl_clr |= BALLOON3_NAND_CONTROL_FLALE;
-
-		if (balloon3_ctl_clr)
-			__raw_writel(balloon3_ctl_clr,
-				BALLOON3_NAND_CONTROL_REG);
-		if (balloon3_ctl_set)
-			__raw_writel(balloon3_ctl_set,
-				BALLOON3_NAND_CONTROL_REG +
-				BALLOON3_FPGA_SETnCLR);
-	}
-
-	if (cmd != NAND_CMD_NONE)
-		writeb(cmd, this->legacy.IO_ADDR_W);
-}
-
-static void balloon3_nand_select_chip(struct nand_chip *this, int chip)
-{
-	if (chip < 0 || chip > 3)
-		return;
-
-	/* Assert all nCE lines */
-	__raw_writew(
-		BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
-		BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3,
-		BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR);
-
-	/* Deassert correct nCE line */
-	__raw_writew(BALLOON3_NAND_CONTROL_FLCE0 << chip,
-		BALLOON3_NAND_CONTROL_REG);
-}
-
-static int balloon3_nand_dev_ready(struct nand_chip *this)
-{
-	return __raw_readl(BALLOON3_NAND_STAT_REG) & BALLOON3_NAND_STAT_RNB;
-}
-
-static int balloon3_nand_probe(struct platform_device *pdev)
-{
-	uint16_t ver;
-	int ret;
-
-	__raw_writew(BALLOON3_NAND_CONTROL2_16BIT,
-		BALLOON3_NAND_CONTROL2_REG + BALLOON3_FPGA_SETnCLR);
-
-	ver = __raw_readw(BALLOON3_FPGA_VER);
-	if (ver < 0x4f08)
-		pr_warn("The FPGA code, version 0x%04x, is too old. "
-			"NAND support might be broken in this version!", ver);
-
-	/* Power up the NAND chips */
-	ret = gpio_request(BALLOON3_GPIO_RUN_NAND, "NAND");
-	if (ret)
-		goto err1;
-
-	ret = gpio_direction_output(BALLOON3_GPIO_RUN_NAND, 1);
-	if (ret)
-		goto err2;
-
-	gpio_set_value(BALLOON3_GPIO_RUN_NAND, 1);
-
-	/* Deassert all nCE lines and write protect line */
-	__raw_writel(
-		BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
-		BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 |
-		BALLOON3_NAND_CONTROL_FLWP,
-		BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR);
-	return 0;
-
-err2:
-	gpio_free(BALLOON3_GPIO_RUN_NAND);
-err1:
-	return ret;
-}
-
-static void balloon3_nand_remove(struct platform_device *pdev)
-{
-	/* Power down the NAND chips */
-	gpio_set_value(BALLOON3_GPIO_RUN_NAND, 0);
-	gpio_free(BALLOON3_GPIO_RUN_NAND);
-}
-
-static struct mtd_partition balloon3_partition_info[] = {
-	[0] = {
-		.name	= "Boot",
-		.offset	= 0,
-		.size	= SZ_4M,
-	},
-	[1] = {
-		.name	= "RootFS",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL
-	},
-};
-
-struct platform_nand_data balloon3_nand_pdata = {
-	.chip = {
-		.nr_chips	= 4,
-		.chip_offset	= 0,
-		.nr_partitions	= ARRAY_SIZE(balloon3_partition_info),
-		.partitions	= balloon3_partition_info,
-		.chip_delay	= 50,
-	},
-	.ctrl = {
-		.dev_ready	= balloon3_nand_dev_ready,
-		.select_chip	= balloon3_nand_select_chip,
-		.cmd_ctrl	= balloon3_nand_cmd_ctl,
-		.probe		= balloon3_nand_probe,
-		.remove		= balloon3_nand_remove,
-	},
-};
-
-static struct resource balloon3_nand_resource[] = {
-	[0] = {
-		.start = BALLOON3_NAND_BASE,
-		.end   = BALLOON3_NAND_BASE + 0x4,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device balloon3_nand = {
-	.name		= "gen_nand",
-	.num_resources	= ARRAY_SIZE(balloon3_nand_resource),
-	.resource	= balloon3_nand_resource,
-	.id		= -1,
-	.dev		= {
-		.platform_data = &balloon3_nand_pdata,
-	}
-};
-
-static void __init balloon3_nand_init(void)
-{
-	platform_device_register(&balloon3_nand);
-}
-#else
-static inline void balloon3_nand_init(void) {}
-#endif
-
-/******************************************************************************
- * Core power regulator
- ******************************************************************************/
-#if defined(CONFIG_REGULATOR_MAX1586) || \
-    defined(CONFIG_REGULATOR_MAX1586_MODULE)
-static struct regulator_consumer_supply balloon3_max1587a_consumers[] = {
-	REGULATOR_SUPPLY("vcc_core", NULL),
-};
-
-static struct regulator_init_data balloon3_max1587a_v3_info = {
-	.constraints = {
-		.name		= "vcc_core range",
-		.min_uV		= 900000,
-		.max_uV		= 1705000,
-		.always_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.consumer_supplies	= balloon3_max1587a_consumers,
-	.num_consumer_supplies	= ARRAY_SIZE(balloon3_max1587a_consumers),
-};
-
-static struct max1586_subdev_data balloon3_max1587a_subdevs[] = {
-	{
-		.name		= "vcc_core",
-		.id		= MAX1586_V3,
-		.platform_data	= &balloon3_max1587a_v3_info,
-	}
-};
-
-static struct max1586_platform_data balloon3_max1587a_info = {
-	.subdevs     = balloon3_max1587a_subdevs,
-	.num_subdevs = ARRAY_SIZE(balloon3_max1587a_subdevs),
-	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
-};
-
-static struct i2c_board_info __initdata balloon3_pi2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("max1586", 0x14),
-		.platform_data	= &balloon3_max1587a_info,
-	},
-};
-
-static void __init balloon3_pmic_init(void)
-{
-	pxa27x_set_i2c_power_info(NULL);
-	i2c_register_board_info(1, ARRAY_AND_SIZE(balloon3_pi2c_board_info));
-}
-#else
-static inline void balloon3_pmic_init(void) {}
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init balloon3_init(void)
-{
-	ARB_CNTRL = ARB_CORE_PARK | 0x234;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	balloon3_i2c_init();
-	balloon3_irda_init();
-	balloon3_lcd_init();
-	balloon3_leds_init();
-	balloon3_mmc_init();
-	balloon3_nand_init();
-	balloon3_nor_init();
-	balloon3_pmic_init();
-	balloon3_ts_init();
-	balloon3_udc_init();
-	balloon3_uhc_init();
-	balloon3_cf_init();
-}
-
-static struct map_desc balloon3_io_desc[] __initdata = {
-	{	/* CPLD/FPGA */
-		.virtual	= (unsigned long)BALLOON3_FPGA_VIRT,
-		.pfn		= __phys_to_pfn(BALLOON3_FPGA_PHYS),
-		.length		= BALLOON3_FPGA_LENGTH,
-		.type		= MT_DEVICE,
-	},
-};
-
-static void __init balloon3_map_io(void)
-{
-	pxa27x_map_io();
-	iotable_init(balloon3_io_desc, ARRAY_SIZE(balloon3_io_desc));
-}
-
-MACHINE_START(BALLOON3, "Balloon3")
-	/* Maintainer: Nick Bane. */
-	.map_io		= balloon3_map_io,
-	.nr_irqs	= BALLOON3_NR_IRQS,
-	.init_irq	= balloon3_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= balloon3_init,
-	.atag_offset	= 0x100,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/balloon3.h b/arch/arm/mach-pxa/balloon3.h
deleted file mode 100644
index 04f3639c4082..000000000000
--- a/arch/arm/mach-pxa/balloon3.h
+++ /dev/null
@@ -1,181 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  linux/include/asm-arm/arch-pxa/balloon3.h
- *
- *  Authors:	Nick Bane and Wookey
- *  Created:	Oct, 2005
- *  Copyright:	Toby Churchill Ltd
- *  Cribbed from mainstone.c, by Nicholas Pitre
- */
-
-#ifndef ASM_ARCH_BALLOON3_H
-#define ASM_ARCH_BALLOON3_H
-
-#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
-
-enum balloon3_features {
-	BALLOON3_FEATURE_OHCI,
-	BALLOON3_FEATURE_MMC,
-	BALLOON3_FEATURE_CF,
-	BALLOON3_FEATURE_AUDIO,
-	BALLOON3_FEATURE_TOPPOLY,
-};
-
-#define BALLOON3_FPGA_PHYS	PXA_CS4_PHYS
-#define BALLOON3_FPGA_VIRT	IOMEM(0xf1000000)	/* as per balloon2 */
-#define BALLOON3_FPGA_LENGTH	0x01000000
-
-#define	BALLOON3_FPGA_SETnCLR		(0x1000)
-
-/* FPGA / CPLD registers for CF socket */
-#define	BALLOON3_CF_STATUS_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
-#define	BALLOON3_CF_CONTROL_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
-/* FPGA / CPLD version register */
-#define	BALLOON3_FPGA_VER		(BALLOON3_FPGA_VIRT + 0x00e0001c)
-/* FPGA / CPLD registers for NAND flash */
-#define	BALLOON3_NAND_BASE		(PXA_CS4_PHYS + 0x00e00000)
-#define	BALLOON3_NAND_IO_REG		(BALLOON3_FPGA_VIRT + 0x00e00000)
-#define	BALLOON3_NAND_CONTROL2_REG	(BALLOON3_FPGA_VIRT + 0x00e00010)
-#define	BALLOON3_NAND_STAT_REG		(BALLOON3_FPGA_VIRT + 0x00e00014)
-#define	BALLOON3_NAND_CONTROL_REG	(BALLOON3_FPGA_VIRT + 0x00e00014)
-
-/* fpga/cpld interrupt control register */
-#define BALLOON3_INT_CONTROL_REG	(BALLOON3_FPGA_VIRT + 0x00e0000C)
-#define BALLOON3_VERSION_REG		(BALLOON3_FPGA_VIRT + 0x00e0001c)
-
-#define BALLOON3_SAMOSA_ADDR_REG	(BALLOON3_FPGA_VIRT + 0x00c00000)
-#define BALLOON3_SAMOSA_DATA_REG	(BALLOON3_FPGA_VIRT + 0x00c00004)
-#define BALLOON3_SAMOSA_STATUS_REG	(BALLOON3_FPGA_VIRT + 0x00c0001c)
-
-/* CF Status Register bits (read-only) bits */
-#define BALLOON3_CF_nIRQ		(1 << 0)
-#define BALLOON3_CF_nSTSCHG_BVD1	(1 << 1)
-
-/* CF Control Set Register bits / CF Control Clear Register bits (write-only) */
-#define BALLOON3_CF_RESET		(1 << 0)
-#define BALLOON3_CF_ENABLE		(1 << 1)
-#define BALLOON3_CF_ADD_ENABLE		(1 << 2)
-
-/* CF Interrupt sources */
-#define BALLOON3_BP_CF_NRDY_IRQ		BALLOON3_IRQ(0)
-#define BALLOON3_BP_NSTSCHG_IRQ		BALLOON3_IRQ(1)
-
-/* NAND Control register */
-#define	BALLOON3_NAND_CONTROL_FLWP	(1 << 7)
-#define	BALLOON3_NAND_CONTROL_FLSE	(1 << 6)
-#define	BALLOON3_NAND_CONTROL_FLCE3	(1 << 5)
-#define	BALLOON3_NAND_CONTROL_FLCE2	(1 << 4)
-#define	BALLOON3_NAND_CONTROL_FLCE1	(1 << 3)
-#define	BALLOON3_NAND_CONTROL_FLCE0	(1 << 2)
-#define	BALLOON3_NAND_CONTROL_FLALE	(1 << 1)
-#define	BALLOON3_NAND_CONTROL_FLCLE	(1 << 0)
-
-/* NAND Status register */
-#define	BALLOON3_NAND_STAT_RNB		(1 << 0)
-
-/* NAND Control2 register */
-#define	BALLOON3_NAND_CONTROL2_16BIT	(1 << 0)
-
-/* GPIOs for irqs */
-#define BALLOON3_GPIO_AUX_NIRQ		(94)
-#define BALLOON3_GPIO_CODEC_IRQ		(95)
-
-/* Timer and Idle LED locations */
-#define BALLOON3_GPIO_LED_NAND		(9)
-#define BALLOON3_GPIO_LED_IDLE		(10)
-
-/* backlight control */
-#define BALLOON3_GPIO_RUN_BACKLIGHT	(99)
-
-#define BALLOON3_GPIO_S0_CD		(105)
-
-/* NAND */
-#define BALLOON3_GPIO_RUN_NAND		(102)
-
-/* PCF8574A Leds */
-#define	BALLOON3_PCF_GPIO_BASE		160
-#define	BALLOON3_PCF_GPIO_LED0		(BALLOON3_PCF_GPIO_BASE + 0)
-#define	BALLOON3_PCF_GPIO_LED1		(BALLOON3_PCF_GPIO_BASE + 1)
-#define	BALLOON3_PCF_GPIO_LED2		(BALLOON3_PCF_GPIO_BASE + 2)
-#define	BALLOON3_PCF_GPIO_LED3		(BALLOON3_PCF_GPIO_BASE + 3)
-#define	BALLOON3_PCF_GPIO_LED4		(BALLOON3_PCF_GPIO_BASE + 4)
-#define	BALLOON3_PCF_GPIO_LED5		(BALLOON3_PCF_GPIO_BASE + 5)
-#define	BALLOON3_PCF_GPIO_LED6		(BALLOON3_PCF_GPIO_BASE + 6)
-#define	BALLOON3_PCF_GPIO_LED7		(BALLOON3_PCF_GPIO_BASE + 7)
-
-/* FPGA Interrupt Mask/Acknowledge Register */
-#define BALLOON3_INT_S0_IRQ		(1 << 0)  /* PCMCIA 0 IRQ */
-#define BALLOON3_INT_S0_STSCHG		(1 << 1)  /* PCMCIA 0 status changed */
-
-/* CPLD (and FPGA) interface definitions */
-#define CPLD_LCD0_DATA_SET             0x00
-#define CPLD_LCD0_DATA_CLR             0x10
-#define CPLD_LCD0_COMMAND_SET          0x01
-#define CPLD_LCD0_COMMAND_CLR          0x11
-#define CPLD_LCD1_DATA_SET             0x02
-#define CPLD_LCD1_DATA_CLR             0x12
-#define CPLD_LCD1_COMMAND_SET          0x03
-#define CPLD_LCD1_COMMAND_CLR          0x13
-
-#define CPLD_MISC_SET                  0x07
-#define CPLD_MISC_CLR                  0x17
-#define CPLD_MISC_LOON_NRESET_BIT      0
-#define CPLD_MISC_LOON_UNSUSP_BIT      1
-#define CPLD_MISC_RUN_5V_BIT           2
-#define CPLD_MISC_CHG_D0_BIT           3
-#define CPLD_MISC_CHG_D1_BIT           4
-#define CPLD_MISC_DAC_NCS_BIT          5
-
-#define CPLD_LCD_SET                   0x08
-#define CPLD_LCD_CLR                   0x18
-#define CPLD_LCD_BACKLIGHT_EN_0_BIT    0
-#define CPLD_LCD_BACKLIGHT_EN_1_BIT    1
-#define CPLD_LCD_LED_RED_BIT           4
-#define CPLD_LCD_LED_GREEN_BIT         5
-#define CPLD_LCD_NRESET_BIT            7
-
-#define CPLD_LCD_RO_SET                0x09
-#define CPLD_LCD_RO_CLR                0x19
-#define CPLD_LCD_RO_LCD0_nWAIT_BIT     0
-#define CPLD_LCD_RO_LCD1_nWAIT_BIT     1
-
-#define CPLD_SERIAL_SET                0x0a
-#define CPLD_SERIAL_CLR                0x1a
-#define CPLD_SERIAL_GSM_RI_BIT         0
-#define CPLD_SERIAL_GSM_CTS_BIT        1
-#define CPLD_SERIAL_GSM_DTR_BIT        2
-#define CPLD_SERIAL_LPR_CTS_BIT        3
-#define CPLD_SERIAL_TC232_CTS_BIT      4
-#define CPLD_SERIAL_TC232_DSR_BIT      5
-
-#define CPLD_SROUTING_SET              0x0b
-#define CPLD_SROUTING_CLR              0x1b
-#define CPLD_SROUTING_MSP430_LPR       0
-#define CPLD_SROUTING_MSP430_TC232     1
-#define CPLD_SROUTING_MSP430_GSM       2
-#define CPLD_SROUTING_LOON_LPR         (0 << 4)
-#define CPLD_SROUTING_LOON_TC232       (1 << 4)
-#define CPLD_SROUTING_LOON_GSM         (2 << 4)
-
-#define CPLD_AROUTING_SET              0x0c
-#define CPLD_AROUTING_CLR              0x1c
-#define CPLD_AROUTING_MIC2PHONE_BIT    0
-#define CPLD_AROUTING_PHONE2INT_BIT    1
-#define CPLD_AROUTING_PHONE2EXT_BIT    2
-#define CPLD_AROUTING_LOONL2INT_BIT    3
-#define CPLD_AROUTING_LOONL2EXT_BIT    4
-#define CPLD_AROUTING_LOONR2PHONE_BIT  5
-#define CPLD_AROUTING_LOONR2INT_BIT    6
-#define CPLD_AROUTING_LOONR2EXT_BIT    7
-
-/* Balloon3 Interrupts */
-#define BALLOON3_IRQ(x)		(IRQ_BOARD_START + (x))
-
-#define BALLOON3_AUX_NIRQ	PXA_GPIO_TO_IRQ(BALLOON3_GPIO_AUX_NIRQ)
-#define BALLOON3_CODEC_IRQ	PXA_GPIO_TO_IRQ(BALLOON3_GPIO_CODEC_IRQ)
-
-#define BALLOON3_NR_IRQS	(IRQ_BOARD_START + 16)
-
-extern int balloon3_has(enum balloon3_features feature);
-
-#endif
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
deleted file mode 100644
index 7712327f56a8..000000000000
--- a/arch/arm/mach-pxa/capc7117.c
+++ /dev/null
@@ -1,159 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/capc7117.c
- *
- * Support for the Embedian CAPC-7117 Evaluation Kit
- * based on the Embedian MXM-8x10 Computer on Module
- *
- * Copyright (C) 2009 Embedian Inc.
- * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
- *
- * 2007-09-04: eric miao <eric.y.miao@gmail.com>
- *             rewrite to align with latest kernel
- *
- * 2010-01-09: Edwin Peer <epeer@tmtservices.co.za>
- *             Hennie van der Merwe <hvdmerwe@tmtservices.co.za>
- *             rework for upstream merge
- */
-
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/serial_8250.h>
-#include <linux/gpio.h>
-#include <linux/regulator/machine.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "pxa320.h"
-#include "mxm8x10.h"
-
-#include "generic.h"
-
-/* IDE (PATA) Support */
-static struct pata_platform_info pata_platform_data = {
-	.ioport_shift = 1
-};
-
-static struct resource capc7117_ide_resources[] = {
-	[0] = {
-	       .start = 0x11000020,
-	       .end = 0x1100003f,
-	       .flags = IORESOURCE_MEM
-	},
-	[1] = {
-	       .start = 0x1100001c,
-	       .end = 0x1100001c,
-	       .flags = IORESOURCE_MEM
-	},
-	[2] = {
-	       .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO76)),
-	       .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO76)),
-	       .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING
-	}
-};
-
-static struct platform_device capc7117_ide_device = {
-	.name = "pata_platform",
-	.num_resources = ARRAY_SIZE(capc7117_ide_resources),
-	.resource = capc7117_ide_resources,
-	.dev = {
-		.platform_data = &pata_platform_data,
-		.coherent_dma_mask = ~0		/* grumble */
-	}
-};
-
-static void __init capc7117_ide_init(void)
-{
-	platform_device_register(&capc7117_ide_device);
-}
-
-/* TI16C752 UART support */
-#define	TI16C752_FLAGS		(UPF_BOOT_AUTOCONF | \
-					UPF_IOREMAP | \
-					UPF_BUGGY_UART | \
-					UPF_SKIP_TEST)
-#define	TI16C752_UARTCLK	(22118400)
-static struct plat_serial8250_port ti16c752_platform_data[] = {
-	[0] = {
-	       .mapbase = 0x14000000,
-	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO78)),
-	       .irqflags = IRQF_TRIGGER_RISING,
-	       .flags = TI16C752_FLAGS,
-	       .iotype = UPIO_MEM,
-	       .regshift = 1,
-	       .uartclk = TI16C752_UARTCLK
-	},
-	[1] = {
-	       .mapbase = 0x14000040,
-	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO79)),
-	       .irqflags = IRQF_TRIGGER_RISING,
-	       .flags = TI16C752_FLAGS,
-	       .iotype = UPIO_MEM,
-	       .regshift = 1,
-	       .uartclk = TI16C752_UARTCLK
-	},
-	[2] = {
-	       .mapbase = 0x14000080,
-	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO80)),
-	       .irqflags = IRQF_TRIGGER_RISING,
-	       .flags = TI16C752_FLAGS,
-	       .iotype = UPIO_MEM,
-	       .regshift = 1,
-	       .uartclk = TI16C752_UARTCLK
-	},
-	[3] = {
-	       .mapbase = 0x140000c0,
-	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO81)),
-	       .irqflags = IRQF_TRIGGER_RISING,
-	       .flags = TI16C752_FLAGS,
-	       .iotype = UPIO_MEM,
-	       .regshift = 1,
-	       .uartclk = TI16C752_UARTCLK
-	},
-	[4] = {
-	       /* end of array */
-	}
-};
-
-static struct platform_device ti16c752_device = {
-	.name = "serial8250",
-	.id = PLAT8250_DEV_PLATFORM,
-	.dev = {
-		.platform_data = ti16c752_platform_data
-	}
-};
-
-static void __init capc7117_uarts_init(void)
-{
-	platform_device_register(&ti16c752_device);
-}
-
-static void __init capc7117_init(void)
-{
-	/* Init CoM */
-	mxm_8x10_barebones_init();
-
-	/* Init evaluation board peripherals */
-	mxm_8x10_ac97_init();
-	mxm_8x10_usb_host_init();
-	mxm_8x10_mmc_init();
-
-	capc7117_uarts_init();
-	capc7117_ide_init();
-
-	regulator_has_full_constraints();
-}
-
-MACHINE_START(CAPC7117,
-	      "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM")
-	.atag_offset = 0x100,
-	.map_io = pxa3xx_map_io,
-	.nr_irqs = PXA_NR_IRQS,
-	.init_irq = pxa3xx_init_irq,
-	.handle_irq = pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine = capc7117_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
deleted file mode 100644
index 01f364a66446..000000000000
--- a/arch/arm/mach-pxa/cm-x300.c
+++ /dev/null
@@ -1,883 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/cm-x300.c
- *
- * Support for the CompuLab CM-X300 modules
- *
- * Copyright (C) 2008,2009 CompuLab Ltd.
- *
- * Mike Rapoport <mike@compulab.co.il>
- * Igor Grinberg <grinberg@compulab.co.il>
- */
-#define pr_fmt(fmt) "%s: " fmt, __func__
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/dm9000.h>
-#include <linux/leds.h>
-#include <linux/platform_data/rtc-v3020.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-
-#include <linux/i2c.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <linux/mfd/da903x.h>
-#include <linux/regulator/machine.h>
-#include <linux/power_supply.h>
-#include <linux/apm-emulation.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/spi/tdo24m.h>
-
-#include <linux/soc/pxa/cpu.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/setup.h>
-#include <asm/system_info.h>
-
-#include "pxa300.h"
-#include "pxa27x-udc.h"
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <linux/platform_data/mtd-nand-pxa3xx.h>
-#include <linux/platform_data/asoc-pxa.h>
-#include <linux/platform_data/usb-pxa3xx-ulpi.h>
-
-#include <asm/mach/map.h>
-
-#include "generic.h"
-#include "devices.h"
-
-#define CM_X300_ETH_PHYS	0x08000010
-
-#define GPIO82_MMC_IRQ		(82)
-#define GPIO85_MMC_WP		(85)
-
-#define	CM_X300_MMC_IRQ		PXA_GPIO_TO_IRQ(GPIO82_MMC_IRQ)
-
-#define GPIO95_RTC_CS		(95)
-#define GPIO96_RTC_WR		(96)
-#define GPIO97_RTC_RD		(97)
-#define GPIO98_RTC_IO		(98)
-
-#define GPIO_ULPI_PHY_RST	(127)
-
-static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = {
-	/* LCD */
-	GPIO54_LCD_LDD_0,
-	GPIO55_LCD_LDD_1,
-	GPIO56_LCD_LDD_2,
-	GPIO57_LCD_LDD_3,
-	GPIO58_LCD_LDD_4,
-	GPIO59_LCD_LDD_5,
-	GPIO60_LCD_LDD_6,
-	GPIO61_LCD_LDD_7,
-	GPIO62_LCD_LDD_8,
-	GPIO63_LCD_LDD_9,
-	GPIO64_LCD_LDD_10,
-	GPIO65_LCD_LDD_11,
-	GPIO66_LCD_LDD_12,
-	GPIO67_LCD_LDD_13,
-	GPIO68_LCD_LDD_14,
-	GPIO69_LCD_LDD_15,
-	GPIO72_LCD_FCLK,
-	GPIO73_LCD_LCLK,
-	GPIO74_LCD_PCLK,
-	GPIO75_LCD_BIAS,
-
-	/* BTUART */
-	GPIO111_UART2_RTS,
-	GPIO112_UART2_RXD | MFP_LPM_EDGE_FALL,
-	GPIO113_UART2_TXD,
-	GPIO114_UART2_CTS | MFP_LPM_EDGE_BOTH,
-
-	/* STUART */
-	GPIO109_UART3_TXD,
-	GPIO110_UART3_RXD | MFP_LPM_EDGE_FALL,
-
-	/* AC97 */
-	GPIO23_AC97_nACRESET,
-	GPIO24_AC97_SYSCLK,
-	GPIO29_AC97_BITCLK,
-	GPIO25_AC97_SDATA_IN_0,
-	GPIO27_AC97_SDATA_OUT,
-	GPIO28_AC97_SYNC,
-
-	/* Keypad */
-	GPIO115_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
-	GPIO116_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
-	GPIO117_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
-	GPIO118_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
-	GPIO119_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
-	GPIO120_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
-	GPIO2_2_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
-	GPIO3_2_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
-	GPIO121_KP_MKOUT_0,
-	GPIO122_KP_MKOUT_1,
-	GPIO123_KP_MKOUT_2,
-	GPIO124_KP_MKOUT_3,
-	GPIO125_KP_MKOUT_4,
-	GPIO4_2_KP_MKOUT_5,
-
-	/* MMC1 */
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-	GPIO7_MMC1_CLK,
-	GPIO8_MMC1_CMD,	/* CMD0 for slot 0 */
-
-	/* MMC2 */
-	GPIO9_MMC2_DAT0,
-	GPIO10_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
-	GPIO11_MMC2_DAT2,
-	GPIO12_MMC2_DAT3,
-	GPIO13_MMC2_CLK,
-	GPIO14_MMC2_CMD,
-
-	/* FFUART */
-	GPIO30_UART1_RXD | MFP_LPM_EDGE_FALL,
-	GPIO31_UART1_TXD,
-	GPIO32_UART1_CTS,
-	GPIO37_UART1_RTS,
-	GPIO33_UART1_DCD,
-	GPIO34_UART1_DSR | MFP_LPM_EDGE_FALL,
-	GPIO35_UART1_RI,
-	GPIO36_UART1_DTR,
-
-	/* GPIOs */
-	GPIO82_GPIO | MFP_PULL_HIGH,	/* MMC CD */
-	GPIO85_GPIO,			/* MMC WP */
-	GPIO99_GPIO,			/* Ethernet IRQ */
-
-	/* RTC GPIOs */
-	GPIO95_GPIO | MFP_LPM_DRIVE_HIGH,	/* RTC CS */
-	GPIO96_GPIO | MFP_LPM_DRIVE_HIGH,	/* RTC WR */
-	GPIO97_GPIO | MFP_LPM_DRIVE_HIGH,	/* RTC RD */
-	GPIO98_GPIO,				/* RTC IO */
-
-	/* Standard I2C */
-	GPIO21_I2C_SCL,
-	GPIO22_I2C_SDA,
-
-	/* PWM Backlight */
-	GPIO19_PWM2_OUT,
-};
-
-static mfp_cfg_t cm_x3xx_rev_lt130_mfp_cfg[] __initdata = {
-	/* GPIOs */
-	GPIO79_GPIO,			/* LED */
-	GPIO77_GPIO,			/* WiFi reset */
-	GPIO78_GPIO,			/* BT reset */
-};
-
-static mfp_cfg_t cm_x3xx_rev_ge130_mfp_cfg[] __initdata = {
-	/* GPIOs */
-	GPIO76_GPIO,			/* LED */
-	GPIO71_GPIO,			/* WiFi reset */
-	GPIO70_GPIO,			/* BT reset */
-};
-
-static mfp_cfg_t cm_x310_mfp_cfg[] __initdata = {
-	/* USB PORT 2 */
-	ULPI_STP,
-	ULPI_NXT,
-	ULPI_DIR,
-	GPIO30_ULPI_DATA_OUT_0,
-	GPIO31_ULPI_DATA_OUT_1,
-	GPIO32_ULPI_DATA_OUT_2,
-	GPIO33_ULPI_DATA_OUT_3,
-	GPIO34_ULPI_DATA_OUT_4,
-	GPIO35_ULPI_DATA_OUT_5,
-	GPIO36_ULPI_DATA_OUT_6,
-	GPIO37_ULPI_DATA_OUT_7,
-	GPIO38_ULPI_CLK,
-	/* external PHY reset pin */
-	GPIO127_GPIO,
-
-	/* USB PORT 3 */
-	GPIO77_USB_P3_1,
-	GPIO78_USB_P3_2,
-	GPIO79_USB_P3_3,
-	GPIO80_USB_P3_4,
-	GPIO81_USB_P3_5,
-	GPIO82_USB_P3_6,
-	GPIO0_2_USBH_PEN,
-};
-
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-static struct resource dm9000_resources[] = {
-	[0] = {
-		.start	= CM_X300_ETH_PHYS,
-		.end	= CM_X300_ETH_PHYS + 0x3,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= CM_X300_ETH_PHYS + 0x4,
-		.end	= CM_X300_ETH_PHYS + 0x4 + 500,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)),
-		.end	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct dm9000_plat_data cm_x300_dm9000_platdata = {
-	.flags		= DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
-};
-
-static struct platform_device dm9000_device = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
-	.dev		= {
-		.platform_data = &cm_x300_dm9000_platdata,
-	}
-
-};
-
-static void __init cm_x300_init_dm9000(void)
-{
-	platform_device_register(&dm9000_device);
-}
-#else
-static inline void cm_x300_init_dm9000(void) {}
-#endif
-
-/* LCD */
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info cm_x300_lcd_modes[] = {
-	[0] = {
-		.pixclock	= 38250,
-		.bpp		= 16,
-		.xres		= 480,
-		.yres		= 640,
-		.hsync_len	= 8,
-		.vsync_len	= 2,
-		.left_margin	= 8,
-		.upper_margin	= 2,
-		.right_margin	= 24,
-		.lower_margin	= 4,
-		.cmap_greyscale	= 0,
-	},
-	[1] = {
-		.pixclock	= 153800,
-		.bpp		= 16,
-		.xres		= 240,
-		.yres		= 320,
-		.hsync_len	= 8,
-		.vsync_len	= 2,
-		.left_margin	= 8,
-		.upper_margin	= 2,
-		.right_margin	= 88,
-		.lower_margin	= 2,
-		.cmap_greyscale	= 0,
-	},
-};
-
-static struct pxafb_mach_info cm_x300_lcd = {
-	.modes			= cm_x300_lcd_modes,
-	.num_modes		= ARRAY_SIZE(cm_x300_lcd_modes),
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static void __init cm_x300_init_lcd(void)
-{
-	pxa_set_fb_info(NULL, &cm_x300_lcd);
-}
-#else
-static inline void cm_x300_init_lcd(void) {}
-#endif
-
-#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
-static struct pwm_lookup cm_x300_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.0", NULL, 10000,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data cm_x300_backlight_data = {
-	.max_brightness	= 100,
-	.dft_brightness	= 100,
-};
-
-static struct platform_device cm_x300_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent = &pxa27x_device_pwm0.dev,
-		.platform_data	= &cm_x300_backlight_data,
-	},
-};
-
-static void cm_x300_init_bl(void)
-{
-	pwm_add_table(cm_x300_pwm_lookup, ARRAY_SIZE(cm_x300_pwm_lookup));
-	platform_device_register(&cm_x300_backlight_device);
-}
-#else
-static inline void cm_x300_init_bl(void) {}
-#endif
-
-#if defined(CONFIG_SPI_GPIO) || defined(CONFIG_SPI_GPIO_MODULE)
-#define GPIO_LCD_BASE	(144)
-#define GPIO_LCD_DIN	(GPIO_LCD_BASE + 8)	/* aux_gpio3_0 */
-#define GPIO_LCD_DOUT	(GPIO_LCD_BASE + 9)	/* aux_gpio3_1 */
-#define GPIO_LCD_SCL	(GPIO_LCD_BASE + 10)	/* aux_gpio3_2 */
-#define GPIO_LCD_CS	(GPIO_LCD_BASE + 11)	/* aux_gpio3_3 */
-#define LCD_SPI_BUS_NUM	(1)
-
-static struct spi_gpio_platform_data cm_x300_spi_gpio_pdata = {
-	.num_chipselect	= 1,
-};
-
-static struct platform_device cm_x300_spi_gpio = {
-	.name		= "spi_gpio",
-	.id		= LCD_SPI_BUS_NUM,
-	.dev		= {
-		.platform_data	= &cm_x300_spi_gpio_pdata,
-	},
-};
-
-static struct gpiod_lookup_table cm_x300_spi_gpiod_table = {
-	.dev_id         = "spi_gpio",
-	.table          = {
-		GPIO_LOOKUP("pca9555.1", GPIO_LCD_SCL - GPIO_LCD_BASE,
-			    "sck", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("pca9555.1", GPIO_LCD_DIN - GPIO_LCD_BASE,
-			    "mosi", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("pca9555.1", GPIO_LCD_DOUT - GPIO_LCD_BASE,
-			    "miso", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("pca9555.1", GPIO_LCD_CS - GPIO_LCD_BASE,
-			    "cs", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct tdo24m_platform_data cm_x300_tdo24m_pdata = {
-	.model = TDO35S,
-};
-
-static struct spi_board_info cm_x300_spi_devices[] __initdata = {
-	{
-		.modalias		= "tdo24m",
-		.max_speed_hz		= 1000000,
-		.bus_num		= LCD_SPI_BUS_NUM,
-		.chip_select		= 0,
-		.platform_data		= &cm_x300_tdo24m_pdata,
-	},
-};
-
-static void __init cm_x300_init_spi(void)
-{
-	spi_register_board_info(cm_x300_spi_devices,
-				ARRAY_SIZE(cm_x300_spi_devices));
-	gpiod_add_lookup_table(&cm_x300_spi_gpiod_table);
-	platform_device_register(&cm_x300_spi_gpio);
-}
-#else
-static inline void cm_x300_init_spi(void) {}
-#endif
-
-#if defined(CONFIG_SND_PXA2XX_LIB_AC97)
-static void __init cm_x300_init_ac97(void)
-{
-	pxa_set_ac97_info(NULL);
-}
-#else
-static inline void cm_x300_init_ac97(void) {}
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
-static struct mtd_partition cm_x300_nand_partitions[] = {
-	[0] = {
-		.name        = "OBM",
-		.offset      = 0,
-		.size        = SZ_256K,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	[1] = {
-		.name        = "U-Boot",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = SZ_256K,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	[2] = {
-		.name        = "Environment",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = SZ_256K,
-	},
-	[3] = {
-		.name        = "reserved",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = SZ_256K + SZ_1M,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	[4] = {
-		.name        = "kernel",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = SZ_4M,
-	},
-	[5] = {
-		.name        = "fs",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct pxa3xx_nand_platform_data cm_x300_nand_info = {
-	.keep_config	= 1,
-	.parts		= cm_x300_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(cm_x300_nand_partitions),
-};
-
-static void __init cm_x300_init_nand(void)
-{
-	pxa3xx_set_nand_info(&cm_x300_nand_info);
-}
-#else
-static inline void cm_x300_init_nand(void) {}
-#endif
-
-#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
-static struct pxamci_platform_data cm_x300_mci_platform_data = {
-	.detect_delay_ms	= 200,
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-};
-
-static struct gpiod_lookup_table cm_x300_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		/* Card detect on GPIO 82 */
-		GPIO_LOOKUP("gpio-pxa", GPIO82_MMC_IRQ, "cd", GPIO_ACTIVE_LOW),
-		/* Write protect on GPIO 85 */
-		GPIO_LOOKUP("gpio-pxa", GPIO85_MMC_WP, "wp", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-/* The second MMC slot of CM-X300 is hardwired to Libertas card and has
-   no detection/ro pins */
-static int cm_x300_mci2_init(struct device *dev,
-			     irq_handler_t cm_x300_detect_int,
-	void *data)
-{
-	return 0;
-}
-
-static void cm_x300_mci2_exit(struct device *dev, void *data)
-{
-}
-
-static struct pxamci_platform_data cm_x300_mci2_platform_data = {
-	.detect_delay_ms	= 200,
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 			= cm_x300_mci2_init,
-	.exit			= cm_x300_mci2_exit,
-};
-
-static void __init cm_x300_init_mmc(void)
-{
-	gpiod_add_lookup_table(&cm_x300_mci_gpio_table);
-	pxa_set_mci_info(&cm_x300_mci_platform_data);
-	pxa3xx_set_mci2_info(&cm_x300_mci2_platform_data);
-}
-#else
-static inline void cm_x300_init_mmc(void) {}
-#endif
-
-#if defined(CONFIG_PXA310_ULPI)
-static struct clk *pout_clk;
-
-static int cm_x300_ulpi_phy_reset(void)
-{
-	int err;
-
-	/* reset the PHY */
-	err = gpio_request_one(GPIO_ULPI_PHY_RST, GPIOF_OUT_INIT_LOW,
-			       "ulpi reset");
-	if (err) {
-		pr_err("failed to request ULPI reset GPIO: %d\n", err);
-		return err;
-	}
-
-	msleep(10);
-	gpio_set_value(GPIO_ULPI_PHY_RST, 1);
-	msleep(10);
-
-	gpio_free(GPIO_ULPI_PHY_RST);
-
-	return 0;
-}
-
-static int cm_x300_u2d_init(struct device *dev)
-{
-	int err = 0;
-
-	if (cpu_is_pxa310()) {
-		/* CLK_POUT is connected to the ULPI PHY */
-		pout_clk = clk_get(NULL, "CLK_POUT");
-		if (IS_ERR(pout_clk)) {
-			err = PTR_ERR(pout_clk);
-			pr_err("failed to get CLK_POUT: %d\n", err);
-			return err;
-		}
-		clk_prepare_enable(pout_clk);
-
-		err = cm_x300_ulpi_phy_reset();
-		if (err) {
-			clk_disable(pout_clk);
-			clk_put(pout_clk);
-		}
-	}
-
-	return err;
-}
-
-static void cm_x300_u2d_exit(struct device *dev)
-{
-	if (cpu_is_pxa310()) {
-		clk_disable_unprepare(pout_clk);
-		clk_put(pout_clk);
-	}
-}
-
-static struct pxa3xx_u2d_platform_data cm_x300_u2d_platform_data = {
-	.ulpi_mode	= ULPI_SER_6PIN,
-	.init		= cm_x300_u2d_init,
-	.exit		= cm_x300_u2d_exit,
-};
-
-static void __init cm_x300_init_u2d(void)
-{
-	pxa3xx_set_u2d_info(&cm_x300_u2d_platform_data);
-}
-#else
-static inline void cm_x300_init_u2d(void) {}
-#endif
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static int cm_x300_ohci_init(struct device *dev)
-{
-	if (cpu_is_pxa300())
-		UP2OCR = UP2OCR_HXS
-			| UP2OCR_HXOE | UP2OCR_DMPDE | UP2OCR_DPPDE;
-
-	return 0;
-}
-
-static struct pxaohci_platform_data cm_x300_ohci_platform_data = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW,
-	.init		= cm_x300_ohci_init,
-};
-
-static void __init cm_x300_init_ohci(void)
-{
-	pxa_set_ohci_info(&cm_x300_ohci_platform_data);
-}
-#else
-static inline void cm_x300_init_ohci(void) {}
-#endif
-
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static struct gpio_led cm_x300_leds[] = {
-	[0] = {
-		.name = "cm-x300:green",
-		.default_trigger = "heartbeat",
-		.active_low = 1,
-	},
-};
-
-static struct gpio_led_platform_data cm_x300_gpio_led_pdata = {
-	.num_leds = ARRAY_SIZE(cm_x300_leds),
-	.leds = cm_x300_leds,
-};
-
-static struct platform_device cm_x300_led_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &cm_x300_gpio_led_pdata,
-	},
-};
-
-static void __init cm_x300_init_leds(void)
-{
-	if (system_rev < 130)
-		cm_x300_leds[0].gpio = 79;
-	else
-		cm_x300_leds[0].gpio = 76;
-
-	platform_device_register(&cm_x300_led_device);
-}
-#else
-static inline void cm_x300_init_leds(void) {}
-#endif
-
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-/* PCA9555 */
-static struct pca953x_platform_data cm_x300_gpio_ext_pdata_0 = {
-	.gpio_base = 128,
-};
-
-static struct pca953x_platform_data cm_x300_gpio_ext_pdata_1 = {
-	.gpio_base = 144,
-};
-
-static struct i2c_board_info cm_x300_gpio_ext_info[] = {
-	[0] = {
-		I2C_BOARD_INFO("pca9555", 0x24),
-		.platform_data = &cm_x300_gpio_ext_pdata_0,
-	},
-	[1] = {
-		I2C_BOARD_INFO("pca9555", 0x25),
-		.platform_data = &cm_x300_gpio_ext_pdata_1,
-	},
-};
-
-static void __init cm_x300_init_i2c(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, cm_x300_gpio_ext_info,
-				ARRAY_SIZE(cm_x300_gpio_ext_info));
-}
-#else
-static inline void cm_x300_init_i2c(void) {}
-#endif
-
-#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
-struct v3020_platform_data cm_x300_v3020_pdata = {
-	.use_gpio	= 1,
-	.gpio_cs	= GPIO95_RTC_CS,
-	.gpio_wr	= GPIO96_RTC_WR,
-	.gpio_rd	= GPIO97_RTC_RD,
-	.gpio_io	= GPIO98_RTC_IO,
-};
-
-static struct platform_device cm_x300_rtc_device = {
-	.name		= "v3020",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &cm_x300_v3020_pdata,
-	}
-};
-
-static void __init cm_x300_init_rtc(void)
-{
-	platform_device_register(&cm_x300_rtc_device);
-}
-#else
-static inline void cm_x300_init_rtc(void) {}
-#endif
-
-/* Battery */
-struct power_supply_info cm_x300_psy_info = {
-	.name = "battery",
-	.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
-	.voltage_max_design = 4200000,
-	.voltage_min_design = 3000000,
-	.use_for_apm = 1,
-};
-
-static void cm_x300_battery_low(void)
-{
-#if defined(CONFIG_APM_EMULATION)
-	apm_queue_event(APM_LOW_BATTERY);
-#endif
-}
-
-static void cm_x300_battery_critical(void)
-{
-#if defined(CONFIG_APM_EMULATION)
-	apm_queue_event(APM_CRITICAL_SUSPEND);
-#endif
-}
-
-struct da9030_battery_info cm_x300_battery_info = {
-	.battery_info = &cm_x300_psy_info,
-
-	.charge_milliamp = 1000,
-	.charge_millivolt = 4200,
-
-	.vbat_low = 3600,
-	.vbat_crit = 3400,
-	.vbat_charge_start = 4100,
-	.vbat_charge_stop = 4200,
-	.vbat_charge_restart = 4000,
-
-	.vcharge_min = 3200,
-	.vcharge_max = 5500,
-
-	.tbat_low = 197,
-	.tbat_high = 78,
-	.tbat_restart = 100,
-
-	.batmon_interval = 0,
-
-	.battery_low = cm_x300_battery_low,
-	.battery_critical = cm_x300_battery_critical,
-};
-
-static struct regulator_consumer_supply buck2_consumers[] = {
-	REGULATOR_SUPPLY("vcc_core", NULL),
-};
-
-static struct regulator_init_data buck2_data = {
-	.constraints = {
-		.min_uV = 1375000,
-		.max_uV = 1375000,
-		.state_mem = {
-			.enabled = 0,
-		},
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-		.apply_uV = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(buck2_consumers),
-	.consumer_supplies = buck2_consumers,
-};
-
-/* DA9030 */
-struct da903x_subdev_info cm_x300_da9030_subdevs[] = {
-	{
-		.name = "da903x-battery",
-		.id = DA9030_ID_BAT,
-		.platform_data = &cm_x300_battery_info,
-	},
-	{
-		.name = "da903x-regulator",
-		.id = DA9030_ID_BUCK2,
-		.platform_data = &buck2_data,
-	},
-};
-
-static struct da903x_platform_data cm_x300_da9030_info = {
-	.num_subdevs = ARRAY_SIZE(cm_x300_da9030_subdevs),
-	.subdevs = cm_x300_da9030_subdevs,
-};
-
-static struct i2c_board_info cm_x300_pmic_info = {
-	I2C_BOARD_INFO("da9030", 0x49),
-	.irq = IRQ_WAKEUP0,
-	.platform_data = &cm_x300_da9030_info,
-};
-
-static struct i2c_pxa_platform_data cm_x300_pwr_i2c_info = {
-	.use_pio = 1,
-};
-
-static void __init cm_x300_init_da9030(void)
-{
-	pxa3xx_set_i2c_power_info(&cm_x300_pwr_i2c_info);
-	i2c_register_board_info(1, &cm_x300_pmic_info, 1);
-	irq_set_irq_wake(IRQ_WAKEUP0, 1);
-}
-
-/* wi2wi gpio setting for system_rev >= 130 */
-static struct gpio cm_x300_wi2wi_gpios[] __initdata = {
-	{ 71, GPIOF_OUT_INIT_HIGH, "wlan en" },
-	{ 70, GPIOF_OUT_INIT_HIGH, "bt reset" },
-};
-
-static void __init cm_x300_init_wi2wi(void)
-{
-	int err;
-
-	if (system_rev < 130) {
-		cm_x300_wi2wi_gpios[0].gpio = 77;	/* wlan en */
-		cm_x300_wi2wi_gpios[1].gpio = 78;	/* bt reset */
-	}
-
-	/* Libertas and CSR reset */
-	err = gpio_request_array(ARRAY_AND_SIZE(cm_x300_wi2wi_gpios));
-	if (err) {
-		pr_err("failed to request wifi/bt gpios: %d\n", err);
-		return;
-	}
-
-	udelay(10);
-	gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 0);
-	udelay(10);
-	gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 1);
-
-	gpio_free_array(ARRAY_AND_SIZE(cm_x300_wi2wi_gpios));
-}
-
-/* MFP */
-static void __init cm_x300_init_mfp(void)
-{
-	/* board-processor specific GPIO initialization */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_mfp_cfg));
-
-	if (system_rev < 130)
-		pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_lt130_mfp_cfg));
-	else
-		pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_ge130_mfp_cfg));
-
-	if (cpu_is_pxa310())
-		pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x310_mfp_cfg));
-}
-
-static void __init cm_x300_init(void)
-{
-	cm_x300_init_mfp();
-
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	if (cpu_is_pxa300())
-		pxa_set_ffuart_info(NULL);
-
-	cm_x300_init_da9030();
-	cm_x300_init_dm9000();
-	cm_x300_init_lcd();
-	cm_x300_init_u2d();
-	cm_x300_init_ohci();
-	cm_x300_init_mmc();
-	cm_x300_init_nand();
-	cm_x300_init_leds();
-	cm_x300_init_i2c();
-	cm_x300_init_spi();
-	cm_x300_init_rtc();
-	cm_x300_init_ac97();
-	cm_x300_init_wi2wi();
-	cm_x300_init_bl();
-
-	regulator_has_full_constraints();
-}
-
-static void __init cm_x300_fixup(struct tag *tags, char **cmdline)
-{
-	/* Make sure that mi->bank[0].start = PHYS_ADDR */
-	for (; tags->hdr.size; tags = tag_next(tags))
-		if (tags->hdr.tag == ATAG_MEM &&
-			tags->u.mem.start == 0x80000000) {
-			tags->u.mem.start = 0xa0000000;
-			break;
-		}
-}
-
-MACHINE_START(CM_X300, "CM-X300 module")
-	.atag_offset	= 0x100,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= cm_x300_init,
-	.fixup		= cm_x300_fixup,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c
deleted file mode 100644
index b62af07b8f96..000000000000
--- a/arch/arm/mach-pxa/colibri-evalboard.c
+++ /dev/null
@@ -1,138 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/colibri-evalboard.c
- *
- *  Support for Toradex Colibri Evaluation Carrier Board
- *  Daniel Mack <daniel@caiaq.de>
- *  Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/gpio/machine.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <asm/io.h>
-
-#include "pxa27x.h"
-#include "colibri.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include "pxa27x-udc.h"
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data colibri_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.detect_delay_ms	= 200,
-};
-
-static struct gpiod_lookup_table colibri_pxa270_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO0_COLIBRI_PXA270_SD_DETECT,
-			    "cd", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table colibri_pxa300_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO13_COLIBRI_PXA300_SD_DETECT,
-			    "cd", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table colibri_pxa320_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO28_COLIBRI_PXA320_SD_DETECT,
-			    "cd", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static void __init colibri_mmc_init(void)
-{
-	if (machine_is_colibri())	/* PXA270 Colibri */
-		gpiod_add_lookup_table(&colibri_pxa270_mci_gpio_table);
-	if (machine_is_colibri300())	/* PXA300 Colibri */
-		gpiod_add_lookup_table(&colibri_pxa300_mci_gpio_table);
-	else				/* PXA320 Colibri */
-		gpiod_add_lookup_table(&colibri_pxa320_mci_gpio_table);
-
-	pxa_set_mci_info(&colibri_mci_platform_data);
-}
-#else
-static inline void colibri_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Host
- ******************************************************************************/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static int colibri_ohci_init(struct device *dev)
-{
-	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
-	return 0;
-}
-
-static struct pxaohci_platform_data colibri_ohci_info = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 |
-			  POWER_CONTROL_LOW | POWER_SENSE_LOW,
-	.init		= colibri_ohci_init,
-};
-
-static void __init colibri_uhc_init(void)
-{
-	/* Colibri PXA270 has two usb ports, TBA for 320 */
-	if (machine_is_colibri())
-		colibri_ohci_info.flags	|= ENABLE_PORT2;
-
-	pxa_set_ohci_info(&colibri_ohci_info);
-}
-#else
-static inline void colibri_uhc_init(void) {}
-#endif
-
-/******************************************************************************
- * I2C RTC
- ******************************************************************************/
-#if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE)
-static struct i2c_board_info __initdata colibri_i2c_devs[] = {
-	{
-		I2C_BOARD_INFO("m41t00", 0x68),
-	},
-};
-
-static void __init colibri_rtc_init(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(colibri_i2c_devs));
-}
-#else
-static inline void colibri_rtc_init(void) {}
-#endif
-
-void __init colibri_evalboard_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	colibri_mmc_init();
-	colibri_uhc_init();
-	colibri_rtc_init();
-}
diff --git a/arch/arm/mach-pxa/colibri-pcmcia.c b/arch/arm/mach-pxa/colibri-pcmcia.c
deleted file mode 100644
index 9da7b478e5eb..000000000000
--- a/arch/arm/mach-pxa/colibri-pcmcia.c
+++ /dev/null
@@ -1,165 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa2xx_colibri.c
- *
- * Driver for Toradex Colibri PXA270 CF socket
- *
- * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-
-#include <pcmcia/soc_common.h>
-
-#define	COLIBRI270_RESET_GPIO	53
-#define	COLIBRI270_PPEN_GPIO	107
-#define	COLIBRI270_BVD1_GPIO	83
-#define	COLIBRI270_BVD2_GPIO	82
-#define	COLIBRI270_DETECT_GPIO	84
-#define	COLIBRI270_READY_GPIO	1
-
-#define	COLIBRI320_RESET_GPIO	77
-#define	COLIBRI320_PPEN_GPIO	57
-#define	COLIBRI320_BVD1_GPIO	53
-#define	COLIBRI320_BVD2_GPIO	79
-#define	COLIBRI320_DETECT_GPIO	81
-#define	COLIBRI320_READY_GPIO	29
-
-enum {
-	DETECT = 0,
-	READY = 1,
-	BVD1 = 2,
-	BVD2 = 3,
-	PPEN = 4,
-	RESET = 5,
-};
-
-/* Contents of this array are configured on-the-fly in init function */
-static struct gpio colibri_pcmcia_gpios[] = {
-	{ 0,	GPIOF_IN,	"PCMCIA Detect" },
-	{ 0,	GPIOF_IN,	"PCMCIA Ready" },
-	{ 0,	GPIOF_IN,	"PCMCIA BVD1" },
-	{ 0,	GPIOF_IN,	"PCMCIA BVD2" },
-	{ 0,	GPIOF_INIT_LOW,	"PCMCIA PPEN" },
-	{ 0,	GPIOF_INIT_HIGH,"PCMCIA Reset" },
-};
-
-static int colibri_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	int ret;
-
-	ret = gpio_request_array(colibri_pcmcia_gpios,
-				ARRAY_SIZE(colibri_pcmcia_gpios));
-	if (ret)
-		goto err1;
-
-	skt->socket.pci_irq = gpio_to_irq(colibri_pcmcia_gpios[READY].gpio);
-	skt->stat[SOC_STAT_CD].irq = gpio_to_irq(colibri_pcmcia_gpios[DETECT].gpio);
-	skt->stat[SOC_STAT_CD].name = "PCMCIA CD";
-
-err1:
-	return ret;
-}
-
-static void colibri_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
-	gpio_free_array(colibri_pcmcia_gpios,
-			ARRAY_SIZE(colibri_pcmcia_gpios));
-}
-
-static void colibri_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-					struct pcmcia_state *state)
-{
-
-	state->detect = !!gpio_get_value(colibri_pcmcia_gpios[DETECT].gpio);
-	state->ready  = !!gpio_get_value(colibri_pcmcia_gpios[READY].gpio);
-	state->bvd1   = !!gpio_get_value(colibri_pcmcia_gpios[BVD1].gpio);
-	state->bvd2   = !!gpio_get_value(colibri_pcmcia_gpios[BVD2].gpio);
-	state->vs_3v  = 1;
-	state->vs_Xv  = 0;
-}
-
-static int
-colibri_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-				const socket_state_t *state)
-{
-	gpio_set_value(colibri_pcmcia_gpios[PPEN].gpio,
-			!(state->Vcc == 33 && state->Vpp < 50));
-	gpio_set_value(colibri_pcmcia_gpios[RESET].gpio,
-			state->flags & SS_RESET);
-	return 0;
-}
-
-static struct pcmcia_low_level colibri_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-
-	.first			= 0,
-	.nr			= 1,
-
-	.hw_init		= colibri_pcmcia_hw_init,
-	.hw_shutdown		= colibri_pcmcia_hw_shutdown,
-
-	.socket_state		= colibri_pcmcia_socket_state,
-	.configure_socket	= colibri_pcmcia_configure_socket,
-};
-
-static struct platform_device *colibri_pcmcia_device;
-
-static int __init colibri_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_colibri() && !machine_is_colibri320())
-		return -ENODEV;
-
-	colibri_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!colibri_pcmcia_device)
-		return -ENOMEM;
-
-	/* Colibri PXA270 */
-	if (machine_is_colibri()) {
-		colibri_pcmcia_gpios[RESET].gpio	= COLIBRI270_RESET_GPIO;
-		colibri_pcmcia_gpios[PPEN].gpio		= COLIBRI270_PPEN_GPIO;
-		colibri_pcmcia_gpios[BVD1].gpio		= COLIBRI270_BVD1_GPIO;
-		colibri_pcmcia_gpios[BVD2].gpio		= COLIBRI270_BVD2_GPIO;
-		colibri_pcmcia_gpios[DETECT].gpio	= COLIBRI270_DETECT_GPIO;
-		colibri_pcmcia_gpios[READY].gpio	= COLIBRI270_READY_GPIO;
-	/* Colibri PXA320 */
-	} else if (machine_is_colibri320()) {
-		colibri_pcmcia_gpios[RESET].gpio	= COLIBRI320_RESET_GPIO;
-		colibri_pcmcia_gpios[PPEN].gpio		= COLIBRI320_PPEN_GPIO;
-		colibri_pcmcia_gpios[BVD1].gpio		= COLIBRI320_BVD1_GPIO;
-		colibri_pcmcia_gpios[BVD2].gpio		= COLIBRI320_BVD2_GPIO;
-		colibri_pcmcia_gpios[DETECT].gpio	= COLIBRI320_DETECT_GPIO;
-		colibri_pcmcia_gpios[READY].gpio	= COLIBRI320_READY_GPIO;
-	}
-
-	ret = platform_device_add_data(colibri_pcmcia_device,
-		&colibri_pcmcia_ops, sizeof(colibri_pcmcia_ops));
-
-	if (!ret)
-		ret = platform_device_add(colibri_pcmcia_device);
-
-	if (ret)
-		platform_device_put(colibri_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit colibri_pcmcia_exit(void)
-{
-	platform_device_unregister(colibri_pcmcia_device);
-}
-
-module_init(colibri_pcmcia_init);
-module_exit(colibri_pcmcia_exit);
-
-MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
-MODULE_DESCRIPTION("PCMCIA support for Toradex Colibri PXA270/PXA320");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
deleted file mode 100644
index f6eaf464ca83..000000000000
--- a/arch/arm/mach-pxa/colibri-pxa270-income.c
+++ /dev/null
@@ -1,236 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/income.c
- *
- * Support for Income s.r.o. SH-Dmaster PXA270 SBC
- *
- * Copyright (C) 2010
- * Marek Vasut <marek.vasut@gmail.com>
- * Pavel Revak <palo@bielyvlk.sk>
- */
-
-#include <linux/bitops.h>
-#include <linux/delay.h>
-#include <linux/gpio/machine.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/leds.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include "pxa27x.h"
-#include "pxa27x-udc.h"
-#include <linux/platform_data/video-pxafb.h>
-
-#include "devices.h"
-#include "generic.h"
-
-#define GPIO114_INCOME_ETH_IRQ  (114)
-#define GPIO0_INCOME_SD_DETECT  (0)
-#define GPIO0_INCOME_SD_RO      (1)
-#define GPIO54_INCOME_LED_A     (54)
-#define GPIO55_INCOME_LED_B     (55)
-#define GPIO113_INCOME_TS_IRQ   (113)
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data income_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.detect_delay_ms	= 200,
-};
-
-static struct gpiod_lookup_table income_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		/* Card detect on GPIO 0 */
-		GPIO_LOOKUP("gpio-pxa", GPIO0_INCOME_SD_DETECT,
-			    "cd", GPIO_ACTIVE_LOW),
-		/* Write protect on GPIO 1 */
-		GPIO_LOOKUP("gpio-pxa", GPIO0_INCOME_SD_RO,
-			    "wp", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static void __init income_mmc_init(void)
-{
-	gpiod_add_lookup_table(&income_mci_gpio_table);
-	pxa_set_mci_info(&income_mci_platform_data);
-}
-#else
-static inline void income_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Host
- ******************************************************************************/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static struct pxaohci_platform_data income_ohci_info = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-static void __init income_uhc_init(void)
-{
-	pxa_set_ohci_info(&income_ohci_info);
-}
-#else
-static inline void income_uhc_init(void) {}
-#endif
-
-/******************************************************************************
- * LED
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-struct gpio_led income_gpio_leds[] = {
-	{
-		.name			= "income:green:leda",
-		.default_trigger	= "none",
-		.gpio			= GPIO54_INCOME_LED_A,
-		.active_low		= 1,
-	},
-	{
-		.name			= "income:green:ledb",
-		.default_trigger	= "none",
-		.gpio			= GPIO55_INCOME_LED_B,
-		.active_low		= 1,
-	}
-};
-
-static struct gpio_led_platform_data income_gpio_led_info = {
-	.leds		= income_gpio_leds,
-	.num_leds	= ARRAY_SIZE(income_gpio_leds),
-};
-
-static struct platform_device income_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &income_gpio_led_info,
-	}
-};
-
-static void __init income_led_init(void)
-{
-	platform_device_register(&income_leds);
-}
-#else
-static inline void income_led_init(void) {}
-#endif
-
-/******************************************************************************
- * I2C
- ******************************************************************************/
-#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
-static struct i2c_board_info __initdata income_i2c_devs[] = {
-	{
-		I2C_BOARD_INFO("ds1340", 0x68),
-	}, {
-		I2C_BOARD_INFO("lm75", 0x4f),
-	},
-};
-
-static void __init income_i2c_init(void)
-{
-	pxa_set_i2c_info(NULL);
-	pxa27x_set_i2c_power_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(income_i2c_devs));
-}
-#else
-static inline void income_i2c_init(void) {}
-#endif
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info income_lcd_modes[] = {
-{
-	.pixclock	= 144700,
-	.xres		= 320,
-	.yres		= 240,
-	.bpp		= 32,
-	.depth		= 18,
-
-	.left_margin	= 10,
-	.right_margin	= 10,
-	.upper_margin	= 7,
-	.lower_margin	= 8,
-
-	.hsync_len	= 20,
-	.vsync_len	= 2,
-
-	.sync		= FB_SYNC_VERT_HIGH_ACT,
-},
-};
-
-static struct pxafb_mach_info income_lcd_screen = {
-	.modes		= income_lcd_modes,
-	.num_modes	= ARRAY_SIZE(income_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_18BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static void __init income_lcd_init(void)
-{
-	pxa_set_fb_info(NULL, &income_lcd_screen);
-}
-#else
-static inline void income_lcd_init(void) {}
-#endif
-
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
-static struct pwm_lookup income_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 1000000,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data income_backlight_data = {
-	.max_brightness	= 0x3ff,
-	.dft_brightness	= 0x1ff,
-};
-
-static struct platform_device income_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &income_backlight_data,
-	},
-};
-
-static void __init income_pwm_init(void)
-{
-	pwm_add_table(income_pwm_lookup, ARRAY_SIZE(income_pwm_lookup));
-	platform_device_register(&income_backlight);
-}
-#else
-static inline void income_pwm_init(void) {}
-#endif
-
-void __init colibri_pxa270_income_boardinit(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	income_mmc_init();
-	income_uhc_init();
-	income_led_init();
-	income_i2c_init();
-	income_lcd_init();
-	income_pwm_init();
-}
-
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
deleted file mode 100644
index 5dc669752836..000000000000
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ /dev/null
@@ -1,330 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/colibri-pxa270.c
- *
- *  Support for Toradex PXA270 based Colibri module
- *  Daniel Mack <daniel@caiaq.de>
- *  Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/moduleparam.h>
-#include <linux/kernel.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/machine.h>
-#include <linux/ucb1400.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach-types.h>
-#include <linux/sizes.h>
-
-#include <linux/platform_data/asoc-pxa.h>
-#include "colibri.h"
-#include "pxa27x.h"
-
-#include "devices.h"
-#include "generic.h"
-
-/******************************************************************************
- * Evaluation board MFP
- ******************************************************************************/
-#ifdef	 CONFIG_MACH_COLIBRI_EVALBOARD
-static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO0_GPIO,	/* SD detect */
-
-	/* FFUART */
-	GPIO39_FFUART_TXD,
-	GPIO34_FFUART_RXD,
-
-	/* UHC */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-	GPIO119_USBH2_PWR,
-	GPIO120_USBH2_PEN,
-
-	/* PCMCIA */
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO49_nPWE,
-	GPIO48_nPOE,
-	GPIO57_nIOIS16,
-	GPIO56_nPWAIT,
-	GPIO104_PSKTSEL,
-	GPIO53_GPIO,	/* RESET */
-	GPIO83_GPIO,	/* BVD1 */
-	GPIO82_GPIO,	/* BVD2 */
-	GPIO1_GPIO,	/* READY */
-	GPIO84_GPIO,	/* DETECT */
-	GPIO107_GPIO,	/* PPEN */
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-};
-#else
-static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {};
-#endif
-
-#ifdef	CONFIG_MACH_COLIBRI_PXA270_INCOME
-static mfp_cfg_t income_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO0_GPIO,	/* SD detect */
-	GPIO1_GPIO,	/* SD read-only */
-
-	/* FFUART */
-	GPIO39_FFUART_TXD,
-	GPIO34_FFUART_RXD,
-
-	/* BFUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO45_BTUART_RTS,
-
-	/* STUART */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* UHC */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* LED */
-	GPIO54_GPIO,	/* LED A */
-	GPIO55_GPIO,	/* LED B */
-};
-#else
-static mfp_cfg_t income_pin_config[] __initdata = {};
-#endif
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
-	/* Ethernet */
-	GPIO78_nCS_2,	/* Ethernet CS */
-	GPIO114_GPIO,	/* Ethernet IRQ */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO95_AC97_nRESET,
-	GPIO98_AC97_SYSCLK,
-	GPIO113_GPIO,	/* Touchscreen IRQ */
-};
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition colibri_partitions[] = {
-	{
-		.name =		"Bootloader",
-		.offset =	0x00000000,
-		.size =		0x00040000,
-		.mask_flags =	MTD_WRITEABLE	/* force read-only */
-	}, {
-		.name =		"Kernel",
-		.offset =	0x00040000,
-		.size =		0x00400000,
-		.mask_flags =	0
-	}, {
-		.name =		"Rootfs",
-		.offset =	0x00440000,
-		.size =		MTDPART_SIZ_FULL,
-		.mask_flags =	0
-	}
-};
-
-static struct physmap_flash_data colibri_flash_data[] = {
-	{
-		.width		= 4,			/* bankwidth in bytes */
-		.parts		= colibri_partitions,
-		.nr_parts	= ARRAY_SIZE(colibri_partitions)
-	}
-};
-
-static struct resource colibri_pxa270_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_32M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device colibri_pxa270_flash_device = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.dev 	= {
-		.platform_data = colibri_flash_data,
-	},
-	.resource = &colibri_pxa270_flash_resource,
-	.num_resources = 1,
-};
-
-static void __init colibri_pxa270_nor_init(void)
-{
-	platform_device_register(&colibri_pxa270_flash_device);
-}
-#else
-static inline void colibri_pxa270_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * Ethernet
- ******************************************************************************/
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-static struct resource colibri_pxa270_dm9000_resources[] = {
-	{
-		.start	= PXA_CS2_PHYS,
-		.end	= PXA_CS2_PHYS + 3,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= PXA_CS2_PHYS + 4,
-		.end	= PXA_CS2_PHYS + 4 + 500,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= PXA_GPIO_TO_IRQ(GPIO114_COLIBRI_PXA270_ETH_IRQ),
-		.end	= PXA_GPIO_TO_IRQ(GPIO114_COLIBRI_PXA270_ETH_IRQ),
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
-	},
-};
-
-static struct platform_device colibri_pxa270_dm9000_device = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(colibri_pxa270_dm9000_resources),
-	.resource	= colibri_pxa270_dm9000_resources,
-};
-
-static void __init colibri_pxa270_eth_init(void)
-{
-	platform_device_register(&colibri_pxa270_dm9000_device);
-}
-#else
-static inline void colibri_pxa270_eth_init(void) {}
-#endif
-
-/******************************************************************************
- * Audio and Touchscreen
- ******************************************************************************/
-#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
-	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
-static pxa2xx_audio_ops_t colibri_pxa270_ac97_pdata = {
-	.reset_gpio	= 95,
-};
-
-static struct ucb1400_pdata colibri_pxa270_ucb1400_pdata = {
-	.irq		= PXA_GPIO_TO_IRQ(GPIO113_COLIBRI_PXA270_TS_IRQ),
-};
-
-static struct platform_device colibri_pxa270_ucb1400_device = {
-	.name		= "ucb1400_core",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &colibri_pxa270_ucb1400_pdata,
-	},
-};
-
-static void __init colibri_pxa270_tsc_init(void)
-{
-	pxa_set_ac97_info(&colibri_pxa270_ac97_pdata);
-	platform_device_register(&colibri_pxa270_ucb1400_device);
-}
-#else
-static inline void colibri_pxa270_tsc_init(void) {}
-#endif
-
-static int colibri_pxa270_baseboard;
-core_param(colibri_pxa270_baseboard, colibri_pxa270_baseboard, int, 0444);
-
-static void __init colibri_pxa270_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
-
-	colibri_pxa270_nor_init();
-	colibri_pxa270_eth_init();
-	colibri_pxa270_tsc_init();
-
-	switch (colibri_pxa270_baseboard) {
-	case COLIBRI_EVALBOARD:
-		pxa2xx_mfp_config(ARRAY_AND_SIZE(
-			colibri_pxa270_evalboard_pin_config));
-		colibri_evalboard_init();
-		break;
-	case COLIBRI_PXA270_INCOME:
-		pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config));
-		colibri_pxa270_income_boardinit();
-		break;
-	default:
-		printk(KERN_ERR "Illegal colibri_pxa270_baseboard type %d\n",
-				colibri_pxa270_baseboard);
-	}
-
-	regulator_has_full_constraints();
-}
-
-/* The "Income s.r.o. SH-Dmaster PXA270 SBC" board can be booted either
- * with the INCOME mach type or with COLIBRI and the kernel parameter
- * "colibri_pxa270_baseboard=1"
- */
-static void __init colibri_pxa270_income_init(void)
-{
-	colibri_pxa270_baseboard = COLIBRI_PXA270_INCOME;
-	colibri_pxa270_init();
-}
-
-MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
-	.atag_offset	= 0x100,
-	.init_machine	= colibri_pxa270_init,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-
-MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
-	.atag_offset	= 0x100,
-	.init_machine	= colibri_pxa270_income_init,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
deleted file mode 100644
index 11ca6c4795e7..000000000000
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ /dev/null
@@ -1,193 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  arch/arm/mach-pxa/colibri-pxa300.c
- *
- *  Support for Toradex PXA300/310 based Colibri module
- *
- *  Daniel Mack <daniel@caiaq.de>
- *  Matthias Meier <matthias.j.meier@gmx.net>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/soc/pxa/cpu.h>
-
-#include <asm/mach-types.h>
-#include <linux/sizes.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-
-#include "pxa300.h"
-#include "colibri.h"
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/asoc-pxa.h>
-
-#include "generic.h"
-#include "devices.h"
-
-
-#ifdef CONFIG_MACH_COLIBRI_EVALBOARD
-static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = {
-	/* MMC */
-	GPIO7_MMC1_CLK,
-	GPIO14_MMC1_CMD,
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-	GPIO13_GPIO,	/* GPIO13_COLIBRI_PXA300_SD_DETECT */
-
-	/* UHC */
-	GPIO0_2_USBH_PEN,
-	GPIO1_2_USBH_PWR,
-	GPIO77_USB_P3_1,
-	GPIO78_USB_P3_2,
-	GPIO79_USB_P3_3,
-	GPIO80_USB_P3_4,
-	GPIO81_USB_P3_5,
-	GPIO82_USB_P3_6,
-
-	/* I2C */
-	GPIO21_I2C_SCL,
-	GPIO22_I2C_SDA,
-};
-#else
-static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = {};
-#endif
-
-#if defined(CONFIG_AX88796)
-#define COLIBRI_ETH_IRQ_GPIO	mfp_to_gpio(GPIO26_GPIO)
-/*
- * Asix AX88796 Ethernet
- */
-static struct ax_plat_data colibri_asix_platdata = {
-	.flags		= 0, /* defined later */
-	.wordlength	= 2,
-};
-
-static struct resource colibri_asix_resource[] = {
-	[0] = {
-		.start = PXA3xx_CS2_PHYS,
-		.end   = PXA3xx_CS2_PHYS + (0x20 * 2) - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
-		.end   = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
-		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
-	}
-};
-
-static struct platform_device asix_device = {
-	.name		= "ax88796",
-	.id		= 0,
-	.num_resources 	= ARRAY_SIZE(colibri_asix_resource),
-	.resource	= colibri_asix_resource,
-	.dev		= {
-		.platform_data = &colibri_asix_platdata
-	}
-};
-
-static mfp_cfg_t colibri_pxa300_eth_pin_config[] __initdata = {
-	GPIO1_nCS2,			/* AX88796 chip select */
-	GPIO26_GPIO | MFP_PULL_HIGH	/* AX88796 IRQ */
-};
-
-static void __init colibri_pxa300_init_eth(void)
-{
-	colibri_pxa3xx_init_eth(&colibri_asix_platdata);
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_eth_pin_config));
-	platform_device_register(&asix_device);
-}
-#else
-static inline void __init colibri_pxa300_init_eth(void) {}
-#endif /* CONFIG_AX88796 */
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static mfp_cfg_t colibri_pxa300_lcd_pin_config[] __initdata = {
-	GPIO54_LCD_LDD_0,
-	GPIO55_LCD_LDD_1,
-	GPIO56_LCD_LDD_2,
-	GPIO57_LCD_LDD_3,
-	GPIO58_LCD_LDD_4,
-	GPIO59_LCD_LDD_5,
-	GPIO60_LCD_LDD_6,
-	GPIO61_LCD_LDD_7,
-	GPIO62_LCD_LDD_8,
-	GPIO63_LCD_LDD_9,
-	GPIO64_LCD_LDD_10,
-	GPIO65_LCD_LDD_11,
-	GPIO66_LCD_LDD_12,
-	GPIO67_LCD_LDD_13,
-	GPIO68_LCD_LDD_14,
-	GPIO69_LCD_LDD_15,
-	GPIO70_LCD_LDD_16,
-	GPIO71_LCD_LDD_17,
-	GPIO62_LCD_CS_N,
-	GPIO72_LCD_FCLK,
-	GPIO73_LCD_LCLK,
-	GPIO74_LCD_PCLK,
-	GPIO75_LCD_BIAS,
-	GPIO76_LCD_VSYNC,
-};
-
-static void __init colibri_pxa300_init_lcd(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_lcd_pin_config));
-}
-
-#else
-static inline void colibri_pxa300_init_lcd(void) {}
-#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
-
-#if defined(CONFIG_SND_AC97_CODEC) || defined(CONFIG_SND_AC97_CODEC_MODULE)
-static mfp_cfg_t colibri_pxa310_ac97_pin_config[] __initdata = {
-	GPIO24_AC97_SYSCLK,
-	GPIO23_AC97_nACRESET,
-	GPIO25_AC97_SDATA_IN_0,
-	GPIO27_AC97_SDATA_OUT,
-	GPIO28_AC97_SYNC,
-	GPIO29_AC97_BITCLK
-};
-
-static inline void __init colibri_pxa310_init_ac97(void)
-{
-	/* no AC97 codec on Colibri PXA300 */
-	if (!cpu_is_pxa310())
-		return;
-
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa310_ac97_pin_config));
-	pxa_set_ac97_info(NULL);
-}
-#else
-static inline void colibri_pxa310_init_ac97(void) {}
-#endif
-
-void __init colibri_pxa300_init(void)
-{
-	colibri_pxa300_init_eth();
-	colibri_pxa3xx_init_nand();
-	colibri_pxa300_init_lcd();
-	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO39_GPIO));
-	colibri_pxa310_init_ac97();
-
-	/* Evalboard init */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_evalboard_pin_config));
-	colibri_evalboard_init();
-}
-
-MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
-	.atag_offset	= 0x100,
-	.init_machine	= colibri_pxa300_init,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
deleted file mode 100644
index 1a59056e181e..000000000000
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ /dev/null
@@ -1,264 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  arch/arm/mach-pxa/colibri-pxa320.c
- *
- *  Support for Toradex PXA320/310 based Colibri module
- *
- *  Daniel Mack <daniel@caiaq.de>
- *  Matthias Meier <matthias.j.meier@gmx.net>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-
-#include <asm/mach-types.h>
-#include <linux/sizes.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-
-#include "pxa320.h"
-#include "colibri.h"
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <linux/platform_data/asoc-pxa.h>
-#include "pxa27x-udc.h"
-#include "udc.h"
-
-#include "generic.h"
-#include "devices.h"
-
-#ifdef	CONFIG_MACH_COLIBRI_EVALBOARD
-static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {
-	/* MMC */
-	GPIO22_MMC1_CLK,
-	GPIO23_MMC1_CMD,
-	GPIO18_MMC1_DAT0,
-	GPIO19_MMC1_DAT1,
-	GPIO20_MMC1_DAT2,
-	GPIO21_MMC1_DAT3,
-	GPIO28_GPIO,	/* SD detect */
-
-	/* UART 1 configuration (may be set by bootloader) */
-	GPIO99_UART1_CTS,
-	GPIO104_UART1_RTS,
-	GPIO97_UART1_RXD,
-	GPIO98_UART1_TXD,
-	GPIO101_UART1_DTR,
-	GPIO103_UART1_DSR,
-	GPIO100_UART1_DCD,
-	GPIO102_UART1_RI,
-
-	/* UART 2 configuration */
-	GPIO109_UART2_CTS,
-	GPIO112_UART2_RTS,
-	GPIO110_UART2_RXD,
-	GPIO111_UART2_TXD,
-
-	/* UART 3 configuration */
-	GPIO30_UART3_RXD,
-	GPIO31_UART3_TXD,
-
-	/* UHC */
-	GPIO2_2_USBH_PEN,
-	GPIO3_2_USBH_PWR,
-
-	/* I2C */
-	GPIO32_I2C_SCL,
-	GPIO33_I2C_SDA,
-
-	/* PCMCIA */
-	MFP_CFG(GPIO59, AF7),	/* PRST ; AF7 to tristate */
-	MFP_CFG(GPIO61, AF7),	/* PCE1 ; AF7 to tristate */
-	MFP_CFG(GPIO60, AF7),	/* PCE2 ; AF7 to tristate */
-	MFP_CFG(GPIO62, AF7),	/* PCD ; AF7 to tristate */
-	MFP_CFG(GPIO56, AF7),	/* PSKTSEL ; AF7 to tristate */
-	GPIO27_GPIO,		/* RDnWR ; input/tristate */
-	GPIO50_GPIO,		/* PREG ; input/tristate */
-	GPIO2_RDY,
-	GPIO5_NPIOR,
-	GPIO6_NPIOW,
-	GPIO7_NPIOS16,
-	GPIO8_NPWAIT,
-	GPIO29_GPIO,		/* PRDY (READY GPIO) */
-	GPIO57_GPIO,		/* PPEN (POWER GPIO) */
-	GPIO81_GPIO,		/* PCD (DETECT GPIO) */
-	GPIO77_GPIO,		/* PRST (RESET GPIO) */
-	GPIO53_GPIO,		/* PBVD1 */
-	GPIO79_GPIO,		/* PBVD2 */
-	GPIO54_GPIO,		/* POE */
-};
-#else
-static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {};
-#endif
-
-#if defined(CONFIG_AX88796)
-#define COLIBRI_ETH_IRQ_GPIO	mfp_to_gpio(GPIO36_GPIO)
-/*
- * Asix AX88796 Ethernet
- */
-static struct ax_plat_data colibri_asix_platdata = {
-	.flags		= 0, /* defined later */
-	.wordlength	= 2,
-};
-
-static struct resource colibri_asix_resource[] = {
-	[0] = {
-		.start = PXA3xx_CS2_PHYS,
-		.end   = PXA3xx_CS2_PHYS + (0x20 * 2) - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
-		.end   = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
-		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
-	}
-};
-
-static struct platform_device asix_device = {
-	.name		= "ax88796",
-	.id		= 0,
-	.num_resources 	= ARRAY_SIZE(colibri_asix_resource),
-	.resource	= colibri_asix_resource,
-	.dev		= {
-		.platform_data = &colibri_asix_platdata
-	}
-};
-
-static mfp_cfg_t colibri_pxa320_eth_pin_config[] __initdata = {
-	GPIO3_nCS2,			/* AX88796 chip select */
-	GPIO36_GPIO | MFP_PULL_HIGH	/* AX88796 IRQ */
-};
-
-static void __init colibri_pxa320_init_eth(void)
-{
-	colibri_pxa3xx_init_eth(&colibri_asix_platdata);
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_eth_pin_config));
-	platform_device_register(&asix_device);
-}
-#else
-static inline void __init colibri_pxa320_init_eth(void) {}
-#endif /* CONFIG_AX88796 */
-
-#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
-static struct gpiod_lookup_table gpio_vbus_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", MFP_PIN_GPIO96,
-			    "vbus", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device colibri_pxa320_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-};
-
-static void colibri_pxa320_udc_command(int cmd)
-{
-	if (cmd == PXA2XX_UDC_CMD_CONNECT)
-		UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
-	else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
-		UP2OCR = UP2OCR_HXOE;
-}
-
-static struct pxa2xx_udc_mach_info colibri_pxa320_udc_info __initdata = {
-	.udc_command		= colibri_pxa320_udc_command,
-	.gpio_pullup		= -1,
-};
-
-static void __init colibri_pxa320_init_udc(void)
-{
-	pxa_set_udc_info(&colibri_pxa320_udc_info);
-	gpiod_add_lookup_table(&gpio_vbus_gpiod_table);
-	platform_device_register(&colibri_pxa320_gpio_vbus);
-}
-#else
-static inline void colibri_pxa320_init_udc(void) {}
-#endif
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static mfp_cfg_t colibri_pxa320_lcd_pin_config[] __initdata = {
-	GPIO6_2_LCD_LDD_0,
-	GPIO7_2_LCD_LDD_1,
-	GPIO8_2_LCD_LDD_2,
-	GPIO9_2_LCD_LDD_3,
-	GPIO10_2_LCD_LDD_4,
-	GPIO11_2_LCD_LDD_5,
-	GPIO12_2_LCD_LDD_6,
-	GPIO13_2_LCD_LDD_7,
-	GPIO63_LCD_LDD_8,
-	GPIO64_LCD_LDD_9,
-	GPIO65_LCD_LDD_10,
-	GPIO66_LCD_LDD_11,
-	GPIO67_LCD_LDD_12,
-	GPIO68_LCD_LDD_13,
-	GPIO69_LCD_LDD_14,
-	GPIO70_LCD_LDD_15,
-	GPIO71_LCD_LDD_16,
-	GPIO72_LCD_LDD_17,
-	GPIO73_LCD_CS_N,
-	GPIO74_LCD_VSYNC,
-	GPIO14_2_LCD_FCLK,
-	GPIO15_2_LCD_LCLK,
-	GPIO16_2_LCD_PCLK,
-	GPIO17_2_LCD_BIAS,
-};
-
-static void __init colibri_pxa320_init_lcd(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_lcd_pin_config));
-}
-#else
-static inline void colibri_pxa320_init_lcd(void) {}
-#endif
-
-#if	defined(CONFIG_SND_AC97_CODEC) || \
-	defined(CONFIG_SND_AC97_CODEC_MODULE)
-static mfp_cfg_t colibri_pxa320_ac97_pin_config[] __initdata = {
-	GPIO34_AC97_SYSCLK,
-	GPIO35_AC97_SDATA_IN_0,
-	GPIO37_AC97_SDATA_OUT,
-	GPIO38_AC97_SYNC,
-	GPIO39_AC97_BITCLK,
-	GPIO40_AC97_nACRESET
-};
-
-static inline void __init colibri_pxa320_init_ac97(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_ac97_pin_config));
-	pxa_set_ac97_info(NULL);
-}
-#else
-static inline void colibri_pxa320_init_ac97(void) {}
-#endif
-
-void __init colibri_pxa320_init(void)
-{
-	colibri_pxa320_init_eth();
-	colibri_pxa3xx_init_nand();
-	colibri_pxa320_init_lcd();
-	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO49_GPIO));
-	colibri_pxa320_init_ac97();
-	colibri_pxa320_init_udc();
-
-	/* Evalboard init */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_evalboard_pin_config));
-	colibri_evalboard_init();
-}
-
-MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
-	.atag_offset	= 0x100,
-	.init_machine	= colibri_pxa320_init,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
deleted file mode 100644
index 77d6ef5fa42d..000000000000
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ /dev/null
@@ -1,147 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  arch/arm/mach-pxa/colibri-pxa3xx.c
- *
- *  Common functions for all Toradex PXA3xx modules
- *
- *  Daniel Mack <daniel@caiaq.de>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/etherdevice.h>
-#include <asm/mach-types.h>
-#include <linux/sizes.h>
-#include <asm/system_info.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include "pxa3xx-regs.h"
-#include "mfp-pxa300.h"
-#include "colibri.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mtd-nand-pxa3xx.h>
-
-#include "generic.h"
-#include "devices.h"
-
-#if defined(CONFIG_AX88796)
-#define ETHER_ADDR_LEN 6
-static u8 ether_mac_addr[ETHER_ADDR_LEN];
-
-void __init colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data)
-{
-	int i;
-	u64 serial = ((u64) system_serial_high << 32) | system_serial_low;
-
-	/*
-	 * If the bootloader passed in a serial boot tag, which contains a
-	 * valid ethernet MAC, pass it to the interface. Toradex ships the
-	 * modules with their own bootloader which provides a valid MAC
-	 * this way.
-	 */
-
-	for (i = 0; i < ETHER_ADDR_LEN; i++) {
-		ether_mac_addr[i] = serial & 0xff;
-		serial >>= 8;
-	}
-
-	if (is_valid_ether_addr(ether_mac_addr)) {
-		plat_data->flags |= AXFLG_MAC_FROMPLATFORM;
-		plat_data->mac_addr = ether_mac_addr;
-		printk(KERN_INFO "%s(): taking MAC from serial boot tag\n",
-			__func__);
-	} else {
-		plat_data->flags |= AXFLG_MAC_FROMDEV;
-		printk(KERN_INFO "%s(): no valid serial boot tag found, "
-			"taking MAC from device\n", __func__);
-	}
-}
-#endif
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static int lcd_bl_pin;
-
-/*
- * LCD panel (Sharp LQ043T3DX02)
- */
-static void colibri_lcd_backlight(int on)
-{
-	gpio_set_value(lcd_bl_pin, !!on);
-}
-
-static struct pxafb_mode_info sharp_lq43_mode = {
-	.pixclock	= 101936,
-	.xres		= 480,
-	.yres		= 272,
-	.bpp		= 32,
-	.depth		= 18,
-	.hsync_len      = 41,
-	.left_margin    = 2,
-	.right_margin   = 2,
-	.vsync_len      = 10,
-	.upper_margin   = 2,
-	.lower_margin   = 2,
-	.sync	   	= 0,
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info sharp_lq43_info = {
-	.modes		= &sharp_lq43_mode,
-	.num_modes	= 1,
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-	.lcd_conn	= LCD_COLOR_TFT_18BPP,
-	.pxafb_backlight_power = colibri_lcd_backlight,
-};
-
-void __init colibri_pxa3xx_init_lcd(int bl_pin)
-{
-	lcd_bl_pin = bl_pin;
-	gpio_request(bl_pin, "lcd backlight");
-	gpio_direction_output(bl_pin, 0);
-	pxa_set_fb_info(NULL, &sharp_lq43_info);
-}
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
-static struct mtd_partition colibri_nand_partitions[] = {
-	{
-		.name        = "bootloader",
-		.offset      = 0,
-		.size        = SZ_512K,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	{
-		.name        = "kernel",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = SZ_4M,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	{
-		.name        = "reserved",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = SZ_1M,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	{
-		.name        = "fs",
-		.offset      = MTDPART_OFS_APPEND,
-		.size        = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct pxa3xx_nand_platform_data colibri_nand_info = {
-	.keep_config	= 1,
-	.parts		= colibri_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(colibri_nand_partitions),
-};
-
-void __init colibri_pxa3xx_init_nand(void)
-{
-	pxa3xx_set_nand_info(&colibri_nand_info);
-}
-#endif
-
diff --git a/arch/arm/mach-pxa/colibri.h b/arch/arm/mach-pxa/colibri.h
deleted file mode 100644
index 01a46f36cc1f..000000000000
--- a/arch/arm/mach-pxa/colibri.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _COLIBRI_H_
-#define _COLIBRI_H_
-
-#include <net/ax88796.h>
-#include "mfp.h"
-
-/*
- * base board glue for PXA270 module
- */
-
-enum {
-	COLIBRI_EVALBOARD = 0,
-	COLIBRI_PXA270_INCOME,
-};
-
-#if defined(CONFIG_MACH_COLIBRI_EVALBOARD)
-extern void colibri_evalboard_init(void);
-#else
-static inline void colibri_evalboard_init(void) {}
-#endif
-
-#if defined(CONFIG_MACH_COLIBRI_PXA270_INCOME)
-extern void colibri_pxa270_income_boardinit(void);
-#else
-static inline void colibri_pxa270_income_boardinit(void) {}
-#endif
-
-/*
- * common settings for all modules
- */
-
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-extern void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin);
-#else
-static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin) {}
-#endif
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-extern void colibri_pxa3xx_init_lcd(int bl_pin);
-#else
-static inline void colibri_pxa3xx_init_lcd(int bl_pin) {}
-#endif
-
-#if defined(CONFIG_AX88796)
-extern void colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data);
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
-extern void colibri_pxa3xx_init_nand(void);
-#else
-static inline void colibri_pxa3xx_init_nand(void) {}
-#endif
-
-/* physical memory regions */
-#define COLIBRI_SDRAM_BASE	0xa0000000      /* SDRAM region */
-
-/* GPIO definitions for Colibri PXA270 */
-#define GPIO114_COLIBRI_PXA270_ETH_IRQ	114
-#define GPIO0_COLIBRI_PXA270_SD_DETECT	0
-#define GPIO113_COLIBRI_PXA270_TS_IRQ	113
-
-/* GPIO definitions for Colibri PXA300/310 */
-#define GPIO13_COLIBRI_PXA300_SD_DETECT	13
-
-/* GPIO definitions for Colibri PXA320 */
-#define GPIO28_COLIBRI_PXA320_SD_DETECT	28
-
-#endif /* _COLIBRI_H_ */
-
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
deleted file mode 100644
index 5738496717e2..000000000000
--- a/arch/arm/mach-pxa/corgi.c
+++ /dev/null
@@ -1,826 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Support for Sharp SL-C7xx PDAs
- * Models: SL-C700 (Corgi), SL-C750 (Shepherd), SL-C760 (Husky)
- *
- * Copyright (c) 2004-2005 Richard Purdie
- *
- * Based on Sharp's 2.4 kernel patches/lubbock.c
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>	/* symbol_get ; symbol_put */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/interrupt.h>
-#include <linux/leds.h>
-#include <linux/mmc/host.h>
-#include <linux/mtd/physmap.h>
-#include <linux/pm.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/backlight.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/io.h>
-#include <linux/regulator/machine.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/spi/corgi_lcd.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/mtd/sharpsl.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/gpio_keys.h>
-#include <linux/memblock.h>
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "pxa25x.h"
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include "udc.h"
-#include "corgi.h"
-#include "sharpsl_pm.h"
-
-#include <asm/mach/sharpsl_param.h>
-#include <asm/hardware/scoop.h>
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned long corgi_pin_config[] __initdata = {
-	/* Static Memory I/O */
-	GPIO78_nCS_2,	/* w100fb */
-	GPIO80_nCS_4,	/* scoop */
-
-	/* SSP1 */
-	GPIO23_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-	GPIO24_GPIO,	/* CORGI_GPIO_ADS7846_CS - SFRM as chip select */
-
-	/* I2S */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO30_I2S_SDATA_OUT,
-	GPIO31_I2S_SYNC,
-	GPIO32_I2S_SYSCLK,
-
-	/* Infra-Red */
-	GPIO47_FICP_TXD,
-	GPIO46_FICP_RXD,
-
-	/* FFUART */
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-	GPIO39_FFUART_TXD,
-	GPIO37_FFUART_DSR,
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-
-	/* PC Card */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-
-	/* GPIO Matrix Keypad */
-	GPIO66_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 0 */
-	GPIO67_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 1 */
-	GPIO68_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 2 */
-	GPIO69_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 3 */
-	GPIO70_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 4 */
-	GPIO71_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 5 */
-	GPIO72_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 6 */
-	GPIO73_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 7 */
-	GPIO74_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 8 */
-	GPIO75_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 9 */
-	GPIO76_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 10 */
-	GPIO77_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 11 */
-	GPIO58_GPIO,	/* row 0 */
-	GPIO59_GPIO,	/* row 1 */
-	GPIO60_GPIO,	/* row 2 */
-	GPIO61_GPIO,	/* row 3 */
-	GPIO62_GPIO,	/* row 4 */
-	GPIO63_GPIO,	/* row 5 */
-	GPIO64_GPIO,	/* row 6 */
-	GPIO65_GPIO,	/* row 7 */
-
-	/* GPIO */
-	GPIO9_GPIO,				/* CORGI_GPIO_nSD_DETECT */
-	GPIO7_GPIO,				/* CORGI_GPIO_nSD_WP */
-	GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH,	/* CORGI_GPIO_MAIN_BAT_{LOW,COVER} */
-	GPIO13_GPIO | MFP_LPM_KEEP_OUTPUT,	/* CORGI_GPIO_LED_ORANGE */
-	GPIO21_GPIO,				/* CORGI_GPIO_ADC_TEMP */
-	GPIO22_GPIO,				/* CORGI_GPIO_IR_ON */
-	GPIO33_GPIO,				/* CORGI_GPIO_SD_PWR */
-	GPIO38_GPIO | MFP_LPM_KEEP_OUTPUT,	/* CORGI_GPIO_CHRG_ON */
-	GPIO43_GPIO | MFP_LPM_KEEP_OUTPUT,	/* CORGI_GPIO_CHRG_UKN */
-	GPIO44_GPIO,				/* CORGI_GPIO_HSYNC */
-
-	GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,	/* CORGI_GPIO_KEY_INT */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,	/* CORGI_GPIO_AC_IN */
-	GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH,	/* CORGI_GPIO_WAKEUP */
-};
-
-/*
- * Corgi SCOOP Device
- */
-static struct resource corgi_scoop_resources[] = {
-	[0] = {
-		.start		= 0x10800000,
-		.end		= 0x10800fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct scoop_config corgi_scoop_setup = {
-	.io_dir 	= CORGI_SCOOP_IO_DIR,
-	.io_out		= CORGI_SCOOP_IO_OUT,
-	.gpio_base	= CORGI_SCOOP_GPIO_BASE,
-};
-
-struct platform_device corgiscoop_device = {
-	.name		= "sharp-scoop",
-	.id		= -1,
-	.dev		= {
- 		.platform_data	= &corgi_scoop_setup,
-	},
-	.num_resources	= ARRAY_SIZE(corgi_scoop_resources),
-	.resource	= corgi_scoop_resources,
-};
-
-static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
-{
-	.dev        = &corgiscoop_device.dev,
-	.irq        = CORGI_IRQ_GPIO_CF_IRQ,
-	.cd_irq     = CORGI_IRQ_GPIO_CF_CD,
-	.cd_irq_str = "PCMCIA0 CD",
-},
-};
-
-static struct scoop_pcmcia_config corgi_pcmcia_config = {
-	.devs         = &corgi_pcmcia_scoop[0],
-	.num_devs     = 1,
-};
-
-static struct w100_mem_info corgi_fb_mem = {
-	.ext_cntl          = 0x00040003,
-	.sdram_mode_reg    = 0x00650021,
-	.ext_timing_cntl   = 0x10002a4a,
-	.io_cntl           = 0x7ff87012,
-	.size              = 0x1fffff,
-};
-
-static struct w100_gen_regs corgi_fb_regs = {
-	.lcd_format    = 0x00000003,
-	.lcdd_cntl1    = 0x01CC0000,
-	.lcdd_cntl2    = 0x0003FFFF,
-	.genlcd_cntl1  = 0x00FFFF0D,
-	.genlcd_cntl2  = 0x003F3003,
-	.genlcd_cntl3  = 0x000102aa,
-};
-
-static struct w100_gpio_regs corgi_fb_gpio = {
-	.init_data1   = 0x000000bf,
-	.init_data2   = 0x00000000,
-	.gpio_dir1    = 0x00000000,
-	.gpio_oe1     = 0x03c0feff,
-	.gpio_dir2    = 0x00000000,
-	.gpio_oe2     = 0x00000000,
-};
-
-static struct w100_mode corgi_fb_modes[] = {
-{
-	.xres            = 480,
-	.yres            = 640,
-	.left_margin     = 0x56,
-	.right_margin    = 0x55,
-	.upper_margin    = 0x03,
-	.lower_margin    = 0x00,
-	.crtc_ss         = 0x82360056,
-	.crtc_ls         = 0xA0280000,
-	.crtc_gs         = 0x80280028,
-	.crtc_vpos_gs    = 0x02830002,
-	.crtc_rev        = 0x00400008,
-	.crtc_dclk       = 0xA0000000,
-	.crtc_gclk       = 0x8015010F,
-	.crtc_goe        = 0x80100110,
-	.crtc_ps1_active = 0x41060010,
-	.pll_freq        = 75,
-	.fast_pll_freq   = 100,
-	.sysclk_src      = CLK_SRC_PLL,
-	.sysclk_divider  = 0,
-	.pixclk_src      = CLK_SRC_PLL,
-	.pixclk_divider  = 2,
-	.pixclk_divider_rotated = 6,
-},{
-	.xres            = 240,
-	.yres            = 320,
-	.left_margin     = 0x27,
-	.right_margin    = 0x2e,
-	.upper_margin    = 0x01,
-	.lower_margin    = 0x00,
-	.crtc_ss         = 0x81170027,
-	.crtc_ls         = 0xA0140000,
-	.crtc_gs         = 0xC0140014,
-	.crtc_vpos_gs    = 0x00010141,
-	.crtc_rev        = 0x00400008,
-	.crtc_dclk       = 0xA0000000,
-	.crtc_gclk       = 0x8015010F,
-	.crtc_goe        = 0x80100110,
-	.crtc_ps1_active = 0x41060010,
-	.pll_freq        = 0,
-	.fast_pll_freq   = 0,
-	.sysclk_src      = CLK_SRC_XTAL,
-	.sysclk_divider  = 0,
-	.pixclk_src      = CLK_SRC_XTAL,
-	.pixclk_divider  = 1,
-	.pixclk_divider_rotated = 1,
-},
-
-};
-
-static struct w100fb_mach_info corgi_fb_info = {
-	.init_mode  = INIT_MODE_ROTATED,
-	.mem        = &corgi_fb_mem,
-	.regs       = &corgi_fb_regs,
-	.modelist   = &corgi_fb_modes[0],
-	.num_modes  = 2,
-	.gpio       = &corgi_fb_gpio,
-	.xtal_freq  = 12500000,
-	.xtal_dbl   = 0,
-};
-
-static struct resource corgi_fb_resources[] = {
-	[0] = {
-		.start   = 0x08000000,
-		.end     = 0x08ffffff,
-		.flags   = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device corgifb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.num_resources	= ARRAY_SIZE(corgi_fb_resources),
-	.resource	= corgi_fb_resources,
-	.dev            = {
-		.platform_data = &corgi_fb_info,
-	},
-
-};
-
-/*
- * Corgi Keyboard Device
- */
-#define CORGI_KEY_CALENDER	KEY_F1
-#define CORGI_KEY_ADDRESS	KEY_F2
-#define CORGI_KEY_FN		KEY_F3
-#define CORGI_KEY_CANCEL	KEY_F4
-#define CORGI_KEY_OFF		KEY_SUSPEND
-#define CORGI_KEY_EXOK		KEY_F5
-#define CORGI_KEY_EXCANCEL	KEY_F6
-#define CORGI_KEY_EXJOGDOWN	KEY_F7
-#define CORGI_KEY_EXJOGUP	KEY_F8
-#define CORGI_KEY_JAP1		KEY_LEFTCTRL
-#define CORGI_KEY_JAP2		KEY_LEFTALT
-#define CORGI_KEY_MAIL		KEY_F10
-#define CORGI_KEY_OK		KEY_F11
-#define CORGI_KEY_MENU		KEY_F12
-
-static const uint32_t corgikbd_keymap[] = {
-	KEY(0, 1, KEY_1),
-	KEY(0, 2, KEY_3),
-	KEY(0, 3, KEY_5),
-	KEY(0, 4, KEY_6),
-	KEY(0, 5, KEY_7),
-	KEY(0, 6, KEY_9),
-	KEY(0, 7, KEY_0),
-	KEY(0, 8, KEY_BACKSPACE),
-	KEY(1, 1, KEY_2),
-	KEY(1, 2, KEY_4),
-	KEY(1, 3, KEY_R),
-	KEY(1, 4, KEY_Y),
-	KEY(1, 5, KEY_8),
-	KEY(1, 6, KEY_I),
-	KEY(1, 7, KEY_O),
-	KEY(1, 8, KEY_P),
-	KEY(2, 0, KEY_TAB),
-	KEY(2, 1, KEY_Q),
-	KEY(2, 2, KEY_E),
-	KEY(2, 3, KEY_T),
-	KEY(2, 4, KEY_G),
-	KEY(2, 5, KEY_U),
-	KEY(2, 6, KEY_J),
-	KEY(2, 7, KEY_K),
-	KEY(3, 0, CORGI_KEY_CALENDER),
-	KEY(3, 1, KEY_W),
-	KEY(3, 2, KEY_S),
-	KEY(3, 3, KEY_F),
-	KEY(3, 4, KEY_V),
-	KEY(3, 5, KEY_H),
-	KEY(3, 6, KEY_M),
-	KEY(3, 7, KEY_L),
-	KEY(3, 9, KEY_RIGHTSHIFT),
-	KEY(4, 0, CORGI_KEY_ADDRESS),
-	KEY(4, 1, KEY_A),
-	KEY(4, 2, KEY_D),
-	KEY(4, 3, KEY_C),
-	KEY(4, 4, KEY_B),
-	KEY(4, 5, KEY_N),
-	KEY(4, 6, KEY_DOT),
-	KEY(4, 8, KEY_ENTER),
-	KEY(4, 10, KEY_LEFTSHIFT),
-	KEY(5, 0, CORGI_KEY_MAIL),
-	KEY(5, 1, KEY_Z),
-	KEY(5, 2, KEY_X),
-	KEY(5, 3, KEY_MINUS),
-	KEY(5, 4, KEY_SPACE),
-	KEY(5, 5, KEY_COMMA),
-	KEY(5, 7, KEY_UP),
-	KEY(5, 11, CORGI_KEY_FN),
-	KEY(6, 0, KEY_SYSRQ),
-	KEY(6, 1, CORGI_KEY_JAP1),
-	KEY(6, 2, CORGI_KEY_JAP2),
-	KEY(6, 3, CORGI_KEY_CANCEL),
-	KEY(6, 4, CORGI_KEY_OK),
-	KEY(6, 5, CORGI_KEY_MENU),
-	KEY(6, 6, KEY_LEFT),
-	KEY(6, 7, KEY_DOWN),
-	KEY(6, 8, KEY_RIGHT),
-	KEY(7, 0, CORGI_KEY_OFF),
-	KEY(7, 1, CORGI_KEY_EXOK),
-	KEY(7, 2, CORGI_KEY_EXCANCEL),
-	KEY(7, 3, CORGI_KEY_EXJOGDOWN),
-	KEY(7, 4, CORGI_KEY_EXJOGUP),
-};
-
-static struct matrix_keymap_data corgikbd_keymap_data = {
-	.keymap		= corgikbd_keymap,
-	.keymap_size	= ARRAY_SIZE(corgikbd_keymap),
-};
-
-static const int corgikbd_row_gpios[] =
-		{ 58, 59, 60, 61, 62, 63, 64, 65 };
-static const int corgikbd_col_gpios[] =
-		{ 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77 };
-
-static struct matrix_keypad_platform_data corgikbd_pdata = {
-	.keymap_data		= &corgikbd_keymap_data,
-	.row_gpios		= corgikbd_row_gpios,
-	.col_gpios		= corgikbd_col_gpios,
-	.num_row_gpios		= ARRAY_SIZE(corgikbd_row_gpios),
-	.num_col_gpios		= ARRAY_SIZE(corgikbd_col_gpios),
-	.col_scan_delay_us	= 10,
-	.debounce_ms		= 10,
-	.wakeup			= 1,
-};
-
-static struct platform_device corgikbd_device = {
-	.name		= "matrix-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &corgikbd_pdata,
-	},
-};
-
-static struct gpio_keys_button corgi_gpio_keys[] = {
-	{
-		.type	= EV_SW,
-		.code	= SW_LID,
-		.gpio	= CORGI_GPIO_SWA,
-		.desc	= "Lid close switch",
-		.debounce_interval = 500,
-	},
-	{
-		.type	= EV_SW,
-		.code	= SW_TABLET_MODE,
-		.gpio	= CORGI_GPIO_SWB,
-		.desc	= "Tablet mode switch",
-		.debounce_interval = 500,
-	},
-	{
-		.type	= EV_SW,
-		.code	= SW_HEADPHONE_INSERT,
-		.gpio	= CORGI_GPIO_AK_INT,
-		.desc	= "HeadPhone insert",
-		.debounce_interval = 500,
-	},
-};
-
-static struct gpio_keys_platform_data corgi_gpio_keys_platform_data = {
-	.buttons	= corgi_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(corgi_gpio_keys),
-	.poll_interval	= 250,
-};
-
-static struct platform_device corgi_gpio_keys_device = {
-	.name	= "gpio-keys-polled",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &corgi_gpio_keys_platform_data,
-	},
-};
-
-/*
- * Corgi LEDs
- */
-static struct gpio_led corgi_gpio_leds[] = {
-	{
-		.name			= "corgi:amber:charge",
-		.default_trigger	= "sharpsl-charge",
-		.gpio			= CORGI_GPIO_LED_ORANGE,
-	},
-	{
-		.name			= "corgi:green:mail",
-		.default_trigger	= "nand-disk",
-		.gpio			= CORGI_GPIO_LED_GREEN,
-	},
-};
-
-static struct gpio_led_platform_data corgi_gpio_leds_info = {
-	.leds		= corgi_gpio_leds,
-	.num_leds	= ARRAY_SIZE(corgi_gpio_leds),
-};
-
-static struct platform_device corgiled_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &corgi_gpio_leds_info,
-	},
-};
-
-static struct gpiod_lookup_table corgi_audio_gpio_table = {
-	.dev_id = "corgi-audio",
-	.table = {
-		GPIO_LOOKUP("sharp-scoop",
-			    CORGI_GPIO_MUTE_L - CORGI_SCOOP_GPIO_BASE,
-			    "mute-l", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("sharp-scoop",
-			    CORGI_GPIO_MUTE_R - CORGI_SCOOP_GPIO_BASE,
-			    "mute-r", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("sharp-scoop",
-			    CORGI_GPIO_APM_ON - CORGI_SCOOP_GPIO_BASE,
-			    "apm-on", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("sharp-scoop",
-			    CORGI_GPIO_MIC_BIAS - CORGI_SCOOP_GPIO_BASE,
-			    "mic-bias", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/*
- * Corgi Audio
- */
-static struct platform_device corgi_audio_device = {
-	.name	= "corgi-audio",
-	.id	= -1,
-};
-
-/*
- * MMC/SD Device
- *
- * The card detect interrupt isn't debounced so we delay it by 250ms
- * to give the card a chance to fully insert/eject.
- */
-static struct pxamci_platform_data corgi_mci_platform_data = {
-	.detect_delay_ms	= 250,
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-};
-
-static struct gpiod_lookup_table corgi_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		/* Card detect on GPIO 9 */
-		GPIO_LOOKUP("gpio-pxa", CORGI_GPIO_nSD_DETECT,
-			    "cd", GPIO_ACTIVE_LOW),
-		/* Write protect on GPIO 7 */
-		GPIO_LOOKUP("gpio-pxa", CORGI_GPIO_nSD_WP,
-			    "wp", GPIO_ACTIVE_LOW),
-		/* Power on GPIO 33 */
-		GPIO_LOOKUP("gpio-pxa", CORGI_GPIO_SD_PWR,
-			    "power", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/*
- * Irda
- */
-static struct pxaficp_platform_data corgi_ficp_platform_data = {
-	.gpio_pwdown		= CORGI_GPIO_IR_ON,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-
-/*
- * USB Device Controller
- */
-static struct pxa2xx_udc_mach_info udc_info __initdata = {
-	/* no connect GPIO; corgi can't tell connection status */
-	.gpio_pullup		= CORGI_GPIO_USB_PULLUP,
-};
-
-#if IS_ENABLED(CONFIG_SPI_PXA2XX)
-static struct pxa2xx_spi_controller corgi_spi_info = {
-	.num_chipselect	= 3,
-};
-
-static struct gpiod_lookup_table corgi_spi_gpio_table = {
-	.dev_id = "spi1",
-	.table = {
-		GPIO_LOOKUP_IDX("gpio-pxa", CORGI_GPIO_ADS7846_CS, "cs", 0, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX("gpio-pxa", CORGI_GPIO_LCDCON_CS, "cs", 1, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX("gpio-pxa", CORGI_GPIO_MAX1111_CS, "cs", 2, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static void corgi_wait_for_hsync(void)
-{
-	while (gpio_get_value(CORGI_GPIO_HSYNC))
-		cpu_relax();
-
-	while (!gpio_get_value(CORGI_GPIO_HSYNC))
-		cpu_relax();
-}
-
-static struct ads7846_platform_data corgi_ads7846_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.gpio_pendown		= CORGI_GPIO_TP_INT,
-	.wait_for_sync		= corgi_wait_for_hsync,
-};
-
-static void corgi_bl_kick_battery(void)
-{
-	void (*kick_batt)(void);
-
-	kick_batt = symbol_get(sharpsl_battery_kick);
-	if (kick_batt) {
-		kick_batt();
-		symbol_put(sharpsl_battery_kick);
-	}
-}
-
-static struct gpiod_lookup_table corgi_lcdcon_gpio_table = {
-	.dev_id = "spi1.1",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", CORGI_GPIO_BACKLIGHT_CONT,
-			    "BL_CONT", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct corgi_lcd_platform_data corgi_lcdcon_info = {
-	.init_mode		= CORGI_LCD_MODE_VGA,
-	.max_intensity		= 0x2f,
-	.default_intensity	= 0x1f,
-	.limit_mask		= 0x0b,
-	.kick_battery		= corgi_bl_kick_battery,
-};
-
-static struct spi_board_info corgi_spi_devices[] = {
-	{
-		.modalias	= "ads7846",
-		.max_speed_hz	= 1200000,
-		.bus_num	= 1,
-		.chip_select	= 0,
-		.platform_data	= &corgi_ads7846_info,
-		.irq		= PXA_GPIO_TO_IRQ(CORGI_GPIO_TP_INT),
-	}, {
-		.modalias	= "corgi-lcd",
-		.max_speed_hz	= 50000,
-		.bus_num	= 1,
-		.chip_select	= 1,
-		.platform_data	= &corgi_lcdcon_info,
-	}, {
-		.modalias	= "max1111",
-		.max_speed_hz	= 450000,
-		.bus_num	= 1,
-		.chip_select	= 2,
-	},
-};
-
-static void __init corgi_init_spi(void)
-{
-	gpiod_add_lookup_table(&corgi_spi_gpio_table);
-	pxa2xx_set_spi_info(1, &corgi_spi_info);
-	gpiod_add_lookup_table(&corgi_lcdcon_gpio_table);
-	spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices));
-}
-#else
-static inline void corgi_init_spi(void) {}
-#endif
-
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr sharpsl_bbt = {
-	.options = 0,
-	.offs = 4,
-	.len = 2,
-	.pattern = scan_ff_pattern
-};
-
-static const char * const probes[] = {
-	"cmdlinepart",
-	"ofpart",
-	"sharpslpart",
-	NULL,
-};
-
-static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
-	.badblock_pattern	= &sharpsl_bbt,
-	.part_parsers		= probes,
-};
-
-static struct resource sharpsl_nand_resources[] = {
-	{
-		.start	= 0x0C000000,
-		.end	= 0x0C000FFF,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device sharpsl_nand_device = {
-	.name		= "sharpsl-nand",
-	.id		= -1,
-	.resource	= sharpsl_nand_resources,
-	.num_resources	= ARRAY_SIZE(sharpsl_nand_resources),
-	.dev.platform_data	= &sharpsl_nand_platform_data,
-};
-
-static struct mtd_partition sharpsl_rom_parts[] = {
-	{
-		.name	="Boot PROM Filesystem",
-		.offset	= 0x00120000,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data sharpsl_rom_data = {
-	.width		= 2,
-	.nr_parts	= ARRAY_SIZE(sharpsl_rom_parts),
-	.parts		= sharpsl_rom_parts,
-};
-
-static struct resource sharpsl_rom_resources[] = {
-	{
-		.start	= 0x00000000,
-		.end	= 0x007fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device sharpsl_rom_device = {
-	.name	= "physmap-flash",
-	.id	= -1,
-	.resource = sharpsl_rom_resources,
-	.num_resources = ARRAY_SIZE(sharpsl_rom_resources),
-	.dev.platform_data = &sharpsl_rom_data,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&corgiscoop_device,
-	&corgifb_device,
-	&corgi_gpio_keys_device,
-	&corgikbd_device,
-	&corgiled_device,
-	&corgi_audio_device,
-	&sharpsl_nand_device,
-	&sharpsl_rom_device,
-};
-
-static struct i2c_board_info __initdata corgi_i2c_devices[] = {
-	{ I2C_BOARD_INFO("wm8731", 0x1b) },
-};
-
-static void corgi_poweroff(void)
-{
-	if (!machine_is_corgi())
-		/* Green LED off tells the bootloader to halt */
-		gpio_set_value(CORGI_GPIO_LED_GREEN, 0);
-
-	pxa_restart(REBOOT_HARD, NULL);
-}
-
-static void corgi_restart(enum reboot_mode mode, const char *cmd)
-{
-	if (!machine_is_corgi())
-		/* Green LED on tells the bootloader to reboot */
-		gpio_set_value(CORGI_GPIO_LED_GREEN, 1);
-
-	pxa_restart(REBOOT_HARD, cmd);
-}
-
-static void __init corgi_init(void)
-{
-	pm_power_off = corgi_poweroff;
-
-	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
-	PCFR |= PCFR_OPDE;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config));
-
-	/* allow wakeup from various GPIOs */
-	gpio_set_wake(CORGI_GPIO_KEY_INT, 1);
-	gpio_set_wake(CORGI_GPIO_WAKEUP, 1);
-	gpio_set_wake(CORGI_GPIO_AC_IN, 1);
-	gpio_set_wake(CORGI_GPIO_CHRG_FULL, 1);
-
-	if (!machine_is_corgi())
-		gpio_set_wake(CORGI_GPIO_MAIN_BAT_LOW, 1);
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	corgi_init_spi();
-
- 	pxa_set_udc_info(&udc_info);
-	gpiod_add_lookup_table(&corgi_mci_gpio_table);
-	gpiod_add_lookup_table(&corgi_audio_gpio_table);
-	pxa_set_mci_info(&corgi_mci_platform_data);
-	pxa_set_ficp_info(&corgi_ficp_platform_data);
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(corgi_i2c_devices));
-
-	platform_scoop_config = &corgi_pcmcia_config;
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	regulator_has_full_constraints();
-}
-
-static void __init fixup_corgi(struct tag *tags, char **cmdline)
-{
-	sharpsl_save_param();
-	if (machine_is_corgi())
-		memblock_add(0xa0000000, SZ_32M);
-	else
-		memblock_add(0xa0000000, SZ_64M);
-}
-
-#ifdef CONFIG_MACH_CORGI
-MACHINE_START(CORGI, "SHARP Corgi")
-	.fixup		= fixup_corgi,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_machine	= corgi_init,
-	.init_time	= pxa_timer_init,
-	.restart	= corgi_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_SHEPHERD
-MACHINE_START(SHEPHERD, "SHARP Shepherd")
-	.fixup		= fixup_corgi,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_machine	= corgi_init,
-	.init_time	= pxa_timer_init,
-	.restart	= corgi_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_HUSKY
-MACHINE_START(HUSKY, "SHARP Husky")
-	.fixup		= fixup_corgi,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_machine	= corgi_init,
-	.init_time	= pxa_timer_init,
-	.restart	= corgi_restart,
-MACHINE_END
-#endif
-
diff --git a/arch/arm/mach-pxa/corgi.h b/arch/arm/mach-pxa/corgi.h
deleted file mode 100644
index b565ca7b8cda..000000000000
--- a/arch/arm/mach-pxa/corgi.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Hardware specific definitions for SL-C7xx series of PDAs
- *
- * Copyright (c) 2004-2005 Richard Purdie
- *
- * Based on Sharp's 2.4 kernel patches
- */
-#ifndef __ASM_ARCH_CORGI_H
-#define __ASM_ARCH_CORGI_H  1
-
-#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
-
-/*
- * Corgi (Non Standard) GPIO Definitions
- */
-#define CORGI_GPIO_KEY_INT			(0)	/* Keyboard Interrupt */
-#define CORGI_GPIO_AC_IN			(1) /* Charger Detection */
-#define CORGI_GPIO_WAKEUP			(3) /* System wakeup notification? */
-#define CORGI_GPIO_AK_INT			(4)	/* Headphone Jack Control Interrupt */
-#define CORGI_GPIO_TP_INT			(5)	/* Touch Panel Interrupt */
-#define CORGI_GPIO_nSD_WP			(7) /* SD Write Protect? */
-#define CORGI_GPIO_nSD_DETECT		(9) /* MMC/SD Card Detect */
-#define CORGI_GPIO_nSD_INT			(10) /* SD Interrupt for SDIO? */
-#define CORGI_GPIO_MAIN_BAT_LOW		(11) /* Main Battery Low Notification */
-#define CORGI_GPIO_BAT_COVER		(11) /* Battery Cover Detect */
-#define CORGI_GPIO_LED_ORANGE		(13) /* Orange LED Control */
-#define CORGI_GPIO_CF_CD			(14) /* Compact Flash Card Detect */
-#define CORGI_GPIO_CHRG_FULL		(16) /* Charging Complete Notification */
-#define CORGI_GPIO_CF_IRQ			(17) /* Compact Flash Interrupt */
-#define CORGI_GPIO_LCDCON_CS		(19) /* LCD Control Chip Select */
-#define CORGI_GPIO_MAX1111_CS		(20) /* MAX1111 Chip Select */
-#define CORGI_GPIO_ADC_TEMP_ON		(21) /* Select battery voltage or temperature */
-#define CORGI_GPIO_IR_ON			(22) /* Enable IR Transceiver */
-#define CORGI_GPIO_ADS7846_CS		(24) /* ADS7846 Chip Select */
-#define CORGI_GPIO_SD_PWR			(33) /* MMC/SD Power */
-#define CORGI_GPIO_CHRG_ON			(38) /* Enable battery Charging */
-#define CORGI_GPIO_DISCHARGE_ON		(42) /* Enable battery Discharge */
-#define CORGI_GPIO_CHRG_UKN			(43) /* Unknown Charging (Bypass Control?) */
-#define CORGI_GPIO_HSYNC			(44) /* LCD HSync Pulse */
-#define CORGI_GPIO_USB_PULLUP		(45) /* USB show presence to host */
-
-
-/*
- * Corgi Keyboard Definitions
- */
-#define CORGI_KEY_STROBE_NUM		(12)
-#define CORGI_KEY_SENSE_NUM			(8)
-#define CORGI_GPIO_ALL_STROBE_BIT	(0x00003ffc)
-#define CORGI_GPIO_HIGH_SENSE_BIT	(0xfc000000)
-#define CORGI_GPIO_HIGH_SENSE_RSHIFT	(26)
-#define CORGI_GPIO_LOW_SENSE_BIT	(0x00000003)
-#define CORGI_GPIO_LOW_SENSE_LSHIFT	(6)
-#define CORGI_GPIO_STROBE_BIT(a)	GPIO_bit(66+(a))
-#define CORGI_GPIO_SENSE_BIT(a)		GPIO_bit(58+(a))
-#define CORGI_GAFR_ALL_STROBE_BIT	(0x0ffffff0)
-#define CORGI_GAFR_HIGH_SENSE_BIT	(0xfff00000)
-#define CORGI_GAFR_LOW_SENSE_BIT	(0x0000000f)
-#define CORGI_GPIO_KEY_SENSE(a)		(58+(a))
-#define CORGI_GPIO_KEY_STROBE(a)	(66+(a))
-
-
-/*
- * Corgi Interrupts
- */
-#define CORGI_IRQ_GPIO_KEY_INT		PXA_GPIO_TO_IRQ(0)
-#define CORGI_IRQ_GPIO_AC_IN		PXA_GPIO_TO_IRQ(1)
-#define CORGI_IRQ_GPIO_WAKEUP		PXA_GPIO_TO_IRQ(3)
-#define CORGI_IRQ_GPIO_AK_INT		PXA_GPIO_TO_IRQ(4)
-#define CORGI_IRQ_GPIO_TP_INT		PXA_GPIO_TO_IRQ(5)
-#define CORGI_IRQ_GPIO_nSD_DETECT	PXA_GPIO_TO_IRQ(9)
-#define CORGI_IRQ_GPIO_nSD_INT		PXA_GPIO_TO_IRQ(10)
-#define CORGI_IRQ_GPIO_MAIN_BAT_LOW	PXA_GPIO_TO_IRQ(11)
-#define CORGI_IRQ_GPIO_CF_CD		PXA_GPIO_TO_IRQ(14)
-#define CORGI_IRQ_GPIO_CHRG_FULL	PXA_GPIO_TO_IRQ(16)	/* Battery fully charged */
-#define CORGI_IRQ_GPIO_CF_IRQ		PXA_GPIO_TO_IRQ(17)
-#define CORGI_IRQ_GPIO_KEY_SENSE(a)	PXA_GPIO_TO_IRQ(58+(a))	/* Keyboard Sense lines */
-
-
-/*
- * Corgi SCOOP GPIOs and Config
- */
-#define CORGI_SCP_LED_GREEN		SCOOP_GPCR_PA11
-#define CORGI_SCP_SWA			SCOOP_GPCR_PA12  /* Hinge Switch A */
-#define CORGI_SCP_SWB			SCOOP_GPCR_PA13  /* Hinge Switch B */
-#define CORGI_SCP_MUTE_L		SCOOP_GPCR_PA14
-#define CORGI_SCP_MUTE_R		SCOOP_GPCR_PA15
-#define CORGI_SCP_AKIN_PULLUP	SCOOP_GPCR_PA16
-#define CORGI_SCP_APM_ON		SCOOP_GPCR_PA17
-#define CORGI_SCP_BACKLIGHT_CONT	SCOOP_GPCR_PA18
-#define CORGI_SCP_MIC_BIAS		SCOOP_GPCR_PA19
-
-#define CORGI_SCOOP_IO_DIR	( CORGI_SCP_LED_GREEN | CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R | \
-			CORGI_SCP_AKIN_PULLUP | CORGI_SCP_APM_ON | CORGI_SCP_BACKLIGHT_CONT | \
-			CORGI_SCP_MIC_BIAS )
-#define CORGI_SCOOP_IO_OUT	( CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R )
-
-#define CORGI_SCOOP_GPIO_BASE		(PXA_NR_BUILTIN_GPIO)
-#define CORGI_GPIO_LED_GREEN		(CORGI_SCOOP_GPIO_BASE + 0)
-#define CORGI_GPIO_SWA			(CORGI_SCOOP_GPIO_BASE + 1)  /* Hinge Switch A */
-#define CORGI_GPIO_SWB			(CORGI_SCOOP_GPIO_BASE + 2)  /* Hinge Switch B */
-#define CORGI_GPIO_MUTE_L		(CORGI_SCOOP_GPIO_BASE + 3)
-#define CORGI_GPIO_MUTE_R		(CORGI_SCOOP_GPIO_BASE + 4)
-#define CORGI_GPIO_AKIN_PULLUP		(CORGI_SCOOP_GPIO_BASE + 5)
-#define CORGI_GPIO_APM_ON		(CORGI_SCOOP_GPIO_BASE + 6)
-#define CORGI_GPIO_BACKLIGHT_CONT	(CORGI_SCOOP_GPIO_BASE + 7)
-#define CORGI_GPIO_MIC_BIAS		(CORGI_SCOOP_GPIO_BASE + 8)
-
-#endif /* __ASM_ARCH_CORGI_H  */
-
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
deleted file mode 100644
index 555a5c1afd96..000000000000
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ /dev/null
@@ -1,221 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Battery and Power Management code for the Sharp SL-C7xx
- *
- * Copyright (c) 2005 Richard Purdie
- */
-
-#include <linux/module.h>
-#include <linux/stat.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/gpio-pxa.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/apm-emulation.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include "corgi.h"
-#include "pxa2xx-regs.h"
-#include "sharpsl_pm.h"
-
-#include "generic.h"
-
-#define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
-#define SHARPSL_CHARGE_ON_TEMP         0xe0  /* 2.9V */
-#define SHARPSL_CHARGE_ON_ACIN_HIGH    0x9b  /* 6V */
-#define SHARPSL_CHARGE_ON_ACIN_LOW     0x34  /* 2V */
-#define SHARPSL_FATAL_ACIN_VOLT        182   /* 3.45V */
-#define SHARPSL_FATAL_NOACIN_VOLT      170   /* 3.40V */
-
-static struct gpio charger_gpios[] = {
-	{ CORGI_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" },
-	{ CORGI_GPIO_CHRG_ON,	  GPIOF_OUT_INIT_LOW, "Charger On" },
-	{ CORGI_GPIO_CHRG_UKN,	  GPIOF_OUT_INIT_LOW, "Charger Unknown" },
-	{ CORGI_GPIO_AC_IN,	  GPIOF_IN, "Charger Detection" },
-	{ CORGI_GPIO_KEY_INT,	  GPIOF_IN, "Key Interrupt" },
-	{ CORGI_GPIO_WAKEUP,	  GPIOF_IN, "System wakeup notification" },
-};
-
-static void corgi_charger_init(void)
-{
-	gpio_request_array(ARRAY_AND_SIZE(charger_gpios));
-}
-
-static void corgi_measure_temp(int on)
-{
-	gpio_set_value(CORGI_GPIO_ADC_TEMP_ON, on);
-}
-
-static void corgi_charge(int on)
-{
-	if (on) {
-		if (machine_is_corgi() && (sharpsl_pm.flags & SHARPSL_SUSPENDED)) {
-			gpio_set_value(CORGI_GPIO_CHRG_ON, 0);
-			gpio_set_value(CORGI_GPIO_CHRG_UKN, 1);
-		} else {
-			gpio_set_value(CORGI_GPIO_CHRG_ON, 1);
-			gpio_set_value(CORGI_GPIO_CHRG_UKN, 0);
-		}
-	} else {
-		gpio_set_value(CORGI_GPIO_CHRG_ON, 0);
-		gpio_set_value(CORGI_GPIO_CHRG_UKN, 0);
-	}
-}
-
-static void corgi_discharge(int on)
-{
-	gpio_set_value(CORGI_GPIO_DISCHARGE_ON, on);
-}
-
-static void corgi_presuspend(void)
-{
-}
-
-static void corgi_postsuspend(void)
-{
-}
-
-/*
- * Check what brought us out of the suspend.
- * Return: 0 to sleep, otherwise wake
- */
-static int corgi_should_wakeup(unsigned int resume_on_alarm)
-{
-	int is_resume = 0;
-
-	dev_dbg(sharpsl_pm.dev, "PEDR = %x, GPIO_AC_IN = %d, "
-		"GPIO_CHRG_FULL = %d, GPIO_KEY_INT = %d, GPIO_WAKEUP = %d\n",
-		PEDR, gpio_get_value(CORGI_GPIO_AC_IN),
-		gpio_get_value(CORGI_GPIO_CHRG_FULL),
-		gpio_get_value(CORGI_GPIO_KEY_INT),
-		gpio_get_value(CORGI_GPIO_WAKEUP));
-
-	if ((PEDR & GPIO_bit(CORGI_GPIO_AC_IN))) {
-		if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
-			/* charge on */
-			dev_dbg(sharpsl_pm.dev, "ac insert\n");
-			sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
-		} else {
-			/* charge off */
-			dev_dbg(sharpsl_pm.dev, "ac remove\n");
-			sharpsl_pm_led(SHARPSL_LED_OFF);
-			sharpsl_pm.machinfo->charge(0);
-			sharpsl_pm.charge_mode = CHRG_OFF;
-		}
-	}
-
-	if ((PEDR & GPIO_bit(CORGI_GPIO_CHRG_FULL)))
-		dev_dbg(sharpsl_pm.dev, "Charge full interrupt\n");
-
-	if (PEDR & GPIO_bit(CORGI_GPIO_KEY_INT))
-		is_resume |= GPIO_bit(CORGI_GPIO_KEY_INT);
-
-	if (PEDR & GPIO_bit(CORGI_GPIO_WAKEUP))
-		is_resume |= GPIO_bit(CORGI_GPIO_WAKEUP);
-
-	if (resume_on_alarm && (PEDR & PWER_RTC))
-		is_resume |= PWER_RTC;
-
-	dev_dbg(sharpsl_pm.dev, "is_resume: %x\n",is_resume);
-	return is_resume;
-}
-
-static bool corgi_charger_wakeup(void)
-{
-	return !gpio_get_value(CORGI_GPIO_AC_IN) ||
-		!gpio_get_value(CORGI_GPIO_KEY_INT) ||
-		!gpio_get_value(CORGI_GPIO_WAKEUP);
-}
-
-unsigned long corgipm_read_devdata(int type)
-{
-	switch(type) {
-	case SHARPSL_STATUS_ACIN:
-		return !gpio_get_value(CORGI_GPIO_AC_IN);
-	case SHARPSL_STATUS_LOCK:
-		return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock);
-	case SHARPSL_STATUS_CHRGFULL:
-		return gpio_get_value(sharpsl_pm.machinfo->gpio_batfull);
-	case SHARPSL_STATUS_FATAL:
-		return gpio_get_value(sharpsl_pm.machinfo->gpio_fatal);
-	case SHARPSL_ACIN_VOLT:
-		return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT);
-	case SHARPSL_BATT_TEMP:
-		return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_TEMP);
-	case SHARPSL_BATT_VOLT:
-	default:
-		return sharpsl_pm_pxa_read_max1111(MAX1111_BATT_VOLT);
-	}
-}
-
-static struct sharpsl_charger_machinfo corgi_pm_machinfo = {
-	.init            = corgi_charger_init,
-	.exit            = NULL,
-	.gpio_batlock    = CORGI_GPIO_BAT_COVER,
-	.gpio_acin       = CORGI_GPIO_AC_IN,
-	.gpio_batfull    = CORGI_GPIO_CHRG_FULL,
-	.discharge       = corgi_discharge,
-	.charge          = corgi_charge,
-	.measure_temp    = corgi_measure_temp,
-	.presuspend      = corgi_presuspend,
-	.postsuspend     = corgi_postsuspend,
-	.read_devdata    = corgipm_read_devdata,
-	.charger_wakeup  = corgi_charger_wakeup,
-	.should_wakeup   = corgi_should_wakeup,
-#if defined(CONFIG_LCD_CORGI)
-	.backlight_limit = corgi_lcd_limit_intensity,
-#endif
-	.charge_on_volt	  = SHARPSL_CHARGE_ON_VOLT,
-	.charge_on_temp	  = SHARPSL_CHARGE_ON_TEMP,
-	.charge_acin_high = SHARPSL_CHARGE_ON_ACIN_HIGH,
-	.charge_acin_low  = SHARPSL_CHARGE_ON_ACIN_LOW,
-	.fatal_acin_volt  = SHARPSL_FATAL_ACIN_VOLT,
-	.fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT,
-	.bat_levels       = 40,
-	.bat_levels_noac  = sharpsl_battery_levels_noac,
-	.bat_levels_acin  = sharpsl_battery_levels_acin,
-	.status_high_acin = 188,
-	.status_low_acin  = 178,
-	.status_high_noac = 185,
-	.status_low_noac  = 175,
-};
-
-static struct platform_device *corgipm_device;
-
-static int corgipm_init(void)
-{
-	int ret;
-
-	if (!machine_is_corgi() && !machine_is_shepherd()
-			&& !machine_is_husky())
-		return -ENODEV;
-
-	corgipm_device = platform_device_alloc("sharpsl-pm", -1);
-	if (!corgipm_device)
-		return -ENOMEM;
-
-	if (!machine_is_corgi())
-	    corgi_pm_machinfo.batfull_irq = 1;
-
-	corgipm_device->dev.platform_data = &corgi_pm_machinfo;
-	ret = platform_device_add(corgipm_device);
-
-	if (ret)
-		platform_device_put(corgipm_device);
-
-	return ret;
-}
-
-static void corgipm_exit(void)
-{
-	platform_device_unregister(corgipm_device);
-}
-
-module_init(corgipm_init);
-module_exit(corgipm_exit);
diff --git a/arch/arm/mach-pxa/csb701.c b/arch/arm/mach-pxa/csb701.c
deleted file mode 100644
index 527c9fdf9795..000000000000
--- a/arch/arm/mach-pxa/csb701.c
+++ /dev/null
@@ -1,67 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-
-#include <asm/mach-types.h>
-
-static struct gpio_keys_button csb701_buttons[] = {
-	{
-		.code	= 0x7,
-		.gpio	= 1,
-		.active_low = 1,
-		.desc	= "SW2",
-		.type	= EV_SW,
-		.wakeup = 1,
-	},
-};
-
-static struct gpio_keys_platform_data csb701_gpio_keys_data = {
-	.buttons = csb701_buttons,
-	.nbuttons = ARRAY_SIZE(csb701_buttons),
-};
-
-static struct gpio_led csb701_leds[] = {
-	{
-		.name	= "csb701:yellow:heartbeat",
-		.default_trigger = "heartbeat",
-		.gpio	= 11,
-		.active_low = 1,
-	},
-};
-
-static struct platform_device csb701_gpio_keys = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev.platform_data = &csb701_gpio_keys_data,
-};
-
-static struct gpio_led_platform_data csb701_leds_gpio_data = {
-	.leds		= csb701_leds,
-	.num_leds	= ARRAY_SIZE(csb701_leds),
-};
-
-static struct platform_device csb701_leds_gpio = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev.platform_data = &csb701_leds_gpio_data,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&csb701_gpio_keys,
-	&csb701_leds_gpio,
-};
-
-static int __init csb701_init(void)
-{
-	if (!machine_is_csb726())
-		return -ENODEV;
-
-	return platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-module_init(csb701_init);
-
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
deleted file mode 100644
index 410b1af87d55..000000000000
--- a/arch/arm/mach-pxa/csb726.c
+++ /dev/null
@@ -1,291 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Support for Cogent CSB726
- *
- *  Copyright (c) 2008 Dmitry Eremin-Solenikov
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/gpio/machine.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-#include <linux/sm501.h>
-#include <linux/smsc911x.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "csb726.h"
-#include "pxa27x.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <linux/platform_data/asoc-pxa.h>
-#include "smemc.h"
-
-#include "generic.h"
-#include "devices.h"
-
-/*
- * n/a: 2, 5, 6, 7, 8, 23, 24, 25, 26, 27, 87, 88, 89,
- * nu: 58 -- 77, 90, 91, 93, 102, 105-108, 114-116,
- * XXX: 21,
- * XXX: 79 CS_3 for LAN9215 or PSKTSEL on R2, R3
- * XXX: 33 CS_5 for LAN9215 on R1
- */
-
-static unsigned long csb726_pin_config[] = {
-	GPIO78_nCS_2, /* EXP_CS */
-	GPIO79_nCS_3, /* SMSC9215 */
-	GPIO80_nCS_4, /* SM501 */
-
-	GPIO52_GPIO, /* #SMSC9251 int */
-	GPIO53_GPIO, /* SM501 int */
-
-	GPIO1_GPIO, /* GPIO0 */
-	GPIO11_GPIO, /* GPIO1 */
-	GPIO9_GPIO, /* GPIO2 */
-	GPIO10_GPIO, /* GPIO3 */
-	GPIO16_PWM0_OUT, /* or GPIO4 */
-	GPIO17_PWM1_OUT, /* or GPIO5 */
-	GPIO94_GPIO, /* GPIO6 */
-	GPIO95_GPIO, /* GPIO7 */
-	GPIO96_GPIO, /* GPIO8 */
-	GPIO97_GPIO, /* GPIO9 */
-	GPIO15_GPIO, /* EXP_IRQ */
-	GPIO18_RDY, /* EXP_WAIT */
-
-	GPIO0_GPIO, /* PWR_INT */
-	GPIO104_GPIO, /* PWR_OFF */
-
-	GPIO12_GPIO, /* touch irq */
-
-	GPIO13_SSP2_TXD,
-	GPIO14_SSP2_SFRM,
-	MFP_CFG_OUT(GPIO19, AF1, DRIVE_LOW),/* SSP2_SYSCLK */
-	GPIO22_SSP2_SCLK,
-
-	GPIO81_SSP3_TXD,
-	GPIO82_SSP3_RXD,
-	GPIO83_SSP3_SFRM,
-	GPIO84_SSP3_SCLK,
-
-	GPIO20_GPIO, /* SDIO int */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO100_GPIO, /* SD CD */
-	GPIO101_GPIO, /* SD WP */
-
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO113_AC97_nRESET,
-
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-	GPIO36_FFUART_DCD,
-	GPIO37_FFUART_DSR,
-	GPIO38_FFUART_RI,
-	GPIO39_FFUART_TXD,
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16, /* maybe unused */
-	GPIO85_nPCE_1,
-	GPIO98_GPIO, /* CF IRQ */
-	GPIO99_GPIO, /* CF CD */
-	GPIO103_GPIO, /* Reset */
-
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-};
-
-static struct pxamci_platform_data csb726_mci = {
-	.detect_delay_ms	= 500,
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	/* FIXME setpower */
-};
-
-static struct gpiod_lookup_table csb726_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		/* Card detect on GPIO 100 */
-		GPIO_LOOKUP("gpio-pxa", CSB726_GPIO_MMC_DETECT,
-			    "cd", GPIO_ACTIVE_LOW),
-		/* Write protect on GPIO 101 */
-		GPIO_LOOKUP("gpio-pxa", CSB726_GPIO_MMC_RO,
-			    "wp", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct pxaohci_platform_data csb726_ohci_platform_data = {
-	.port_mode	= PMM_NPS_MODE,
-	.flags		= ENABLE_PORT1 | NO_OC_PROTECTION,
-};
-
-static struct mtd_partition csb726_flash_partitions[] = {
-	{
-		.name		= "Bootloader",
-		.offset		= 0,
-		.size		= CSB726_FLASH_uMON,
-		.mask_flags	= MTD_WRITEABLE  /* force read-only */
-	},
-	{
-		.name		= "root",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct physmap_flash_data csb726_flash_data = {
-	.width		= 2,
-	.parts		= csb726_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(csb726_flash_partitions),
-};
-
-static struct resource csb726_flash_resources[] = {
-	{
-		.start          = PXA_CS0_PHYS,
-		.end            = PXA_CS0_PHYS + CSB726_FLASH_SIZE - 1 ,
-		.flags          = IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device csb726_flash = {
-	.name           = "physmap-flash",
-	.dev            = {
-		.platform_data  = &csb726_flash_data,
-	},
-	.resource       = csb726_flash_resources,
-	.num_resources  = ARRAY_SIZE(csb726_flash_resources),
-};
-
-static struct resource csb726_sm501_resources[] = {
-	{
-		.start          = PXA_CS4_PHYS,
-		.end            = PXA_CS4_PHYS + SZ_8M - 1,
-		.flags          = IORESOURCE_MEM,
-		.name		= "sm501-localmem",
-	},
-	{
-		.start          = PXA_CS4_PHYS + SZ_64M - SZ_2M,
-		.end            = PXA_CS4_PHYS + SZ_64M - 1,
-		.flags          = IORESOURCE_MEM,
-		.name		= "sm501-regs",
-	},
-	{
-		.start		= CSB726_IRQ_SM501,
-		.end		= CSB726_IRQ_SM501,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct sm501_initdata csb726_sm501_initdata = {
-/*	.devices	= SM501_USE_USB_HOST, */
-	.devices	= SM501_USE_USB_HOST | SM501_USE_UART0 | SM501_USE_UART1,
-};
-
-static struct sm501_platdata csb726_sm501_platdata = {
-	.init		= &csb726_sm501_initdata,
-};
-
-static struct platform_device csb726_sm501 = {
-	.name		= "sm501",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(csb726_sm501_resources),
-	.resource	= csb726_sm501_resources,
-	.dev		= {
-		.platform_data = &csb726_sm501_platdata,
-	},
-};
-
-static struct resource csb726_lan_resources[] = {
-	{
-		.start	= PXA_CS3_PHYS,
-		.end	= PXA_CS3_PHYS + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= CSB726_IRQ_LAN,
-		.end	= CSB726_IRQ_LAN,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-struct smsc911x_platform_config csb726_lan_config = {
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags		= SMSC911X_USE_32BIT,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-};
-
-
-static struct platform_device csb726_lan = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(csb726_lan_resources),
-	.resource	= csb726_lan_resources,
-	.dev		= {
-		.platform_data	= &csb726_lan_config,
-	},
-};
-
-static struct platform_device *devices[] __initdata = {
-	&csb726_flash,
-	&csb726_sm501,
-	&csb726_lan,
-};
-
-static void __init csb726_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(csb726_pin_config));
-/*	__raw_writel(0x7ffc3ffc, MSC1); *//* LAN9215/EXP_CS */
-/*	__raw_writel(0x06697ff4, MSC2); *//* none/SM501 */
-	__raw_writel((__raw_readl(MSC2) & ~0xffff) | 0x7ff4, MSC2); /* SM501 */
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	pxa_set_i2c_info(NULL);
-	pxa27x_set_i2c_power_info(NULL);
-	gpiod_add_lookup_table(&csb726_mci_gpio_table);
-	pxa_set_mci_info(&csb726_mci);
-	pxa_set_ohci_info(&csb726_ohci_platform_data);
-	pxa_set_ac97_info(NULL);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-MACHINE_START(CSB726, "Cogent CSB726")
-	.atag_offset	= 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.init_machine   = csb726_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/csb726.h b/arch/arm/mach-pxa/csb726.h
deleted file mode 100644
index 628928743bd5..000000000000
--- a/arch/arm/mach-pxa/csb726.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  Support for Cogent CSB726
- *
- *  Copyright (c) 2008 Dmitry Baryshkov
- */
-#ifndef CSB726_H
-#define CSB726_H
-
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
-
-#define CSB726_GPIO_IRQ_LAN	52
-#define CSB726_GPIO_IRQ_SM501	53
-#define CSB726_GPIO_MMC_DETECT	100
-#define CSB726_GPIO_MMC_RO	101
-
-#define CSB726_FLASH_SIZE	(64 * 1024 * 1024)
-#define CSB726_FLASH_uMON	(8 * 1024 * 1024)
-
-#define CSB726_IRQ_LAN		PXA_GPIO_TO_IRQ(CSB726_GPIO_IRQ_LAN)
-#define CSB726_IRQ_SM501	PXA_GPIO_TO_IRQ(CSB726_GPIO_IRQ_SM501)
-
-#endif
-
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index a7b92dd1ca9e..661b3fc43275 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -12,17 +12,11 @@
 #include <linux/soc/pxa/cpu.h>
 
 #include "udc.h"
-#include <linux/platform_data/usb-pxa3xx-ulpi.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/irda-pxaficp.h>
 #include "irqs.h"
 #include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include <linux/platform_data/media/camera-pxa.h>
-#include <linux/platform_data/asoc-pxa.h>
 #include <linux/platform_data/mmp_dma.h>
-#include <linux/platform_data/mtd-nand-pxa3xx.h>
 
 #include "regs-ost.h"
 #include "reset.h"
@@ -84,16 +78,10 @@ void __init pxa_set_mci_info(struct pxamci_platform_data *info)
 	pxa_register_device(&pxa_device_mci, info);
 }
 
-
 static struct pxa2xx_udc_mach_info pxa_udc_info = {
 	.gpio_pullup = -1,
 };
 
-void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info)
-{
-	memcpy(&pxa_udc_info, info, sizeof *info);
-}
-
 static struct resource pxa2xx_udc_resources[] = {
 	[0] = {
 		.start	= 0x40600000,
@@ -131,33 +119,6 @@ struct platform_device pxa27x_device_udc = {
 	}
 };
 
-#ifdef CONFIG_PXA3xx
-static struct resource pxa3xx_u2d_resources[] = {
-	[0] = {
-		.start	= 0x54100000,
-		.end	= 0x54100fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_USB2,
-		.end	= IRQ_USB2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa3xx_device_u2d = {
-	.name		= "pxa3xx-u2d",
-	.id		= -1,
-	.resource	= pxa3xx_u2d_resources,
-	.num_resources	= ARRAY_SIZE(pxa3xx_u2d_resources),
-};
-
-void __init pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info)
-{
-	pxa_register_device(&pxa3xx_device_u2d, info);
-}
-#endif /* CONFIG_PXA3xx */
-
 static struct resource pxafb_resources[] = {
 	[0] = {
 		.start	= 0x44000000,
@@ -378,47 +339,6 @@ struct platform_device pxa_device_asoc_platform = {
 	.id		= -1,
 };
 
-static u64 pxaficp_dmamask = ~(u32)0;
-
-static struct resource pxa_ir_resources[] = {
-	[0] = {
-		.start  = IRQ_STUART,
-		.end    = IRQ_STUART,
-		.flags  = IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start  = IRQ_ICP,
-		.end    = IRQ_ICP,
-		.flags  = IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start  = 0x40800000,
-		.end	= 0x4080001b,
-		.flags  = IORESOURCE_MEM,
-	},
-	[4] = {
-		.start  = 0x40700000,
-		.end	= 0x40700023,
-		.flags  = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device pxa_device_ficp = {
-	.name		= "pxa2xx-ir",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pxa_ir_resources),
-	.resource	= pxa_ir_resources,
-	.dev		= {
-		.dma_mask = &pxaficp_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-};
-
-void __init pxa_set_ficp_info(struct pxaficp_platform_data *info)
-{
-	pxa_register_device(&pxa_device_ficp, info);
-}
-
 static struct resource pxa_rtc_resources[] = {
 	[0] = {
 		.start  = 0x40900000,
@@ -453,49 +373,6 @@ struct platform_device sa1100_device_rtc = {
 	.resource       = pxa_rtc_resources,
 };
 
-static struct resource pxa_ac97_resources[] = {
-	[0] = {
-		.start  = 0x40500000,
-		.end	= 0x40500000 + 0xfff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_AC97,
-		.end    = IRQ_AC97,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static u64 pxa_ac97_dmamask = 0xffffffffUL;
-
-struct platform_device pxa_device_ac97 = {
-	.name           = "pxa2xx-ac97",
-	.id             = -1,
-	.dev            = {
-		.dma_mask = &pxa_ac97_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources  = ARRAY_SIZE(pxa_ac97_resources),
-	.resource       = pxa_ac97_resources,
-};
-
-void __init pxa_set_ac97_info(pxa2xx_audio_ops_t *ops)
-{
-	int ret;
-
-	ret = clk_add_alias("ac97_clk", "pxa2xx-ac97:0", "AC97CLK",
-			   &pxa_device_ac97.dev);
-	if (ret)
-		pr_err("PXA AC97 clock1 alias error: %d\n", ret);
-
-	ret = clk_add_alias("ac97_clk", "pxa2xx-ac97:1", "AC97CLK",
-			    &pxa_device_ac97.dev);
-	if (ret)
-		pr_err("PXA AC97 clock2 alias error: %d\n", ret);
-
-	pxa_register_device(&pxa_device_ac97, ops);
-}
-
 #ifdef CONFIG_PXA25x
 
 static struct resource pxa25x_resource_pwm0[] = {
@@ -609,44 +486,6 @@ struct platform_device pxa25x_device_assp = {
 #endif /* CONFIG_PXA25x */
 
 #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-static struct resource pxa27x_resource_camera[] = {
-	[0] = {
-		.start	= 0x50000000,
-		.end	= 0x50000fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_CAMERA,
-		.end	= IRQ_CAMERA,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 pxa27x_dma_mask_camera = DMA_BIT_MASK(32);
-
-static struct platform_device pxa27x_device_camera = {
-	.name		= "pxa27x-camera",
-	.id		= 0, /* This is used to put cameras on this interface */
-	.dev		= {
-		.dma_mask      		= &pxa27x_dma_mask_camera,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(pxa27x_resource_camera),
-	.resource	= pxa27x_resource_camera,
-};
-
-void __init pxa_set_camera_info(struct pxacamera_platform_data *info)
-{
-	struct clk *mclk;
-
-	/* Register a fixed-rate clock for camera sensors. */
-	mclk = clk_register_fixed_rate(NULL, "pxa_camera_clk", NULL, 0,
-					     info->mclk_10khz * 10000);
-	if (!IS_ERR(mclk))
-		clkdev_create(mclk, "mclk", NULL);
-	pxa_register_device(&pxa27x_device_camera, info);
-}
-
 static u64 pxa27x_ohci_dma_mask = DMA_BIT_MASK(32);
 
 static struct resource pxa27x_resource_ohci[] = {
@@ -680,31 +519,6 @@ void __init pxa_set_ohci_info(struct pxaohci_platform_data *info)
 #endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
 
 #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-static struct resource pxa27x_resource_keypad[] = {
-	[0] = {
-		.start	= 0x41500000,
-		.end	= 0x4150004c,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_KEYPAD,
-		.end	= IRQ_KEYPAD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa27x_device_keypad = {
-	.name		= "pxa27x-keypad",
-	.id		= -1,
-	.resource	= pxa27x_resource_keypad,
-	.num_resources	= ARRAY_SIZE(pxa27x_resource_keypad),
-};
-
-void __init pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info)
-{
-	pxa_register_device(&pxa27x_device_keypad, info);
-}
-
 static u64 pxa27x_ssp1_dma_mask = DMA_BIT_MASK(32);
 
 static struct resource pxa27x_resource_ssp1[] = {
@@ -814,210 +628,6 @@ struct platform_device pxa27x_device_pwm1 = {
 };
 #endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
 
-#ifdef CONFIG_PXA3xx
-static struct resource pxa3xx_resources_mci2[] = {
-	[0] = {
-		.start	= 0x42000000,
-		.end	= 0x42000fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_MMC2,
-		.end	= IRQ_MMC2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa3xx_device_mci2 = {
-	.name		= "pxa2xx-mci",
-	.id		= 1,
-	.dev		= {
-		.dma_mask = &pxamci_dmamask,
-		.coherent_dma_mask =	0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(pxa3xx_resources_mci2),
-	.resource	= pxa3xx_resources_mci2,
-};
-
-void __init pxa3xx_set_mci2_info(struct pxamci_platform_data *info)
-{
-	pxa_register_device(&pxa3xx_device_mci2, info);
-}
-
-static struct resource pxa3xx_resources_mci3[] = {
-	[0] = {
-		.start	= 0x42500000,
-		.end	= 0x42500fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_MMC3,
-		.end	= IRQ_MMC3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa3xx_device_mci3 = {
-	.name		= "pxa2xx-mci",
-	.id		= 2,
-	.dev		= {
-		.dma_mask = &pxamci_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(pxa3xx_resources_mci3),
-	.resource	= pxa3xx_resources_mci3,
-};
-
-void __init pxa3xx_set_mci3_info(struct pxamci_platform_data *info)
-{
-	pxa_register_device(&pxa3xx_device_mci3, info);
-}
-
-static struct resource pxa3xx_resources_gcu[] = {
-	{
-		.start	= 0x54000000,
-		.end	= 0x54000fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_GCU,
-		.end	= IRQ_GCU,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 pxa3xx_gcu_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device pxa3xx_device_gcu = {
-	.name		= "pxa3xx-gcu",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pxa3xx_resources_gcu),
-	.resource	= pxa3xx_resources_gcu,
-	.dev		= {
-		.dma_mask = &pxa3xx_gcu_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-};
-
-#endif /* CONFIG_PXA3xx */
-
-#if defined(CONFIG_PXA3xx)
-static struct resource pxa3xx_resources_i2c_power[] = {
-	{
-		.start  = 0x40f500c0,
-		.end    = 0x40f500d3,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_PWRI2C,
-		.end	= IRQ_PWRI2C,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa3xx_device_i2c_power = {
-	.name		= "pxa3xx-pwri2c",
-	.id		= 1,
-	.resource	= pxa3xx_resources_i2c_power,
-	.num_resources	= ARRAY_SIZE(pxa3xx_resources_i2c_power),
-};
-
-static struct resource pxa3xx_resources_nand[] = {
-	[0] = {
-		.start	= 0x43100000,
-		.end	= 0x43100053,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_NAND,
-		.end	= IRQ_NAND,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 pxa3xx_nand_dma_mask = DMA_BIT_MASK(32);
-
-struct platform_device pxa3xx_device_nand = {
-	.name		= "pxa3xx-nand",
-	.id		= -1,
-	.dev		= {
-		.dma_mask = &pxa3xx_nand_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(pxa3xx_resources_nand),
-	.resource	= pxa3xx_resources_nand,
-};
-
-void __init pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info)
-{
-	pxa_register_device(&pxa3xx_device_nand, info);
-}
-
-static u64 pxa3xx_ssp4_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource pxa3xx_resource_ssp4[] = {
-	[0] = {
-		.start	= 0x41a00000,
-		.end	= 0x41a0003f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_SSP4,
-		.end	= IRQ_SSP4,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-/*
- * PXA3xx SSP is basically equivalent to PXA27x.
- * However, we need to register the device by the correct name in order to
- * make the driver set the correct internal type, hence we provide specific
- * platform_devices for each of them.
- */
-struct platform_device pxa3xx_device_ssp1 = {
-	.name		= "pxa3xx-ssp",
-	.id		= 0,
-	.dev		= {
-		.dma_mask = &pxa27x_ssp1_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource	= pxa27x_resource_ssp1,
-	.num_resources	= ARRAY_SIZE(pxa27x_resource_ssp1),
-};
-
-struct platform_device pxa3xx_device_ssp2 = {
-	.name		= "pxa3xx-ssp",
-	.id		= 1,
-	.dev		= {
-		.dma_mask = &pxa27x_ssp2_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource	= pxa27x_resource_ssp2,
-	.num_resources	= ARRAY_SIZE(pxa27x_resource_ssp2),
-};
-
-struct platform_device pxa3xx_device_ssp3 = {
-	.name		= "pxa3xx-ssp",
-	.id		= 2,
-	.dev		= {
-		.dma_mask = &pxa27x_ssp3_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource	= pxa27x_resource_ssp3,
-	.num_resources	= ARRAY_SIZE(pxa27x_resource_ssp3),
-};
-
-struct platform_device pxa3xx_device_ssp4 = {
-	.name		= "pxa3xx-ssp",
-	.id		= 3,
-	.dev		= {
-		.dma_mask = &pxa3xx_ssp4_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource	= pxa3xx_resource_ssp4,
-	.num_resources	= ARRAY_SIZE(pxa3xx_resource_ssp4),
-};
-#endif /* CONFIG_PXA3xx */
-
 struct resource pxa_resource_gpio[] = {
 	{
 		.start	= 0x40e00000,
@@ -1042,11 +652,7 @@ struct resource pxa_resource_gpio[] = {
 };
 
 struct platform_device pxa25x_device_gpio = {
-#ifdef CONFIG_CPU_PXA26x
-	.name		= "pxa26x-gpio",
-#else
 	.name		= "pxa25x-gpio",
-#endif
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(pxa_resource_gpio),
 	.resource	= pxa_resource_gpio,
@@ -1059,20 +665,6 @@ struct platform_device pxa27x_device_gpio = {
 	.resource	= pxa_resource_gpio,
 };
 
-struct platform_device pxa3xx_device_gpio = {
-	.name		= "pxa3xx-gpio",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pxa_resource_gpio),
-	.resource	= pxa_resource_gpio,
-};
-
-struct platform_device pxa93x_device_gpio = {
-	.name		= "pxa93x-gpio",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pxa_resource_gpio),
-	.resource	= pxa_resource_gpio,
-};
-
 /* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
  * See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */
 void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_controller *info)
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index 498b07bc6a3e..82c83939017a 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -9,7 +9,6 @@ extern struct platform_device pxa3xx_device_mci2;
 extern struct platform_device pxa3xx_device_mci3;
 extern struct platform_device pxa25x_device_udc;
 extern struct platform_device pxa27x_device_udc;
-extern struct platform_device pxa3xx_device_u2d;
 extern struct platform_device pxa_device_fb;
 extern struct platform_device pxa_device_ffuart;
 extern struct platform_device pxa_device_btuart;
@@ -17,7 +16,6 @@ extern struct platform_device pxa_device_stuart;
 extern struct platform_device pxa_device_hwuart;
 extern struct platform_device pxa_device_i2c;
 extern struct platform_device pxa_device_i2s;
-extern struct platform_device pxa_device_ficp;
 extern struct platform_device sa1100_device_rtc;
 extern struct platform_device pxa_device_rtc;
 extern struct platform_device pxa_device_ac97;
diff --git a/arch/arm/mach-pxa/e740-pcmcia.c b/arch/arm/mach-pxa/e740-pcmcia.c
deleted file mode 100644
index 11a2c5d42920..000000000000
--- a/arch/arm/mach-pxa/e740-pcmcia.c
+++ /dev/null
@@ -1,127 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Toshiba e740 PCMCIA specific routines.
- *
- * (c) 2004 Ian Molton <spyro@f2s.com>
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-
-#include "eseries-gpio.h"
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <pcmcia/soc_common.h>
-
-static int e740_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	if (skt->nr == 0) {
-		skt->stat[SOC_STAT_CD].gpio = GPIO_E740_PCMCIA_CD0;
-		skt->stat[SOC_STAT_CD].name = "CF card detect";
-		skt->stat[SOC_STAT_RDY].gpio = GPIO_E740_PCMCIA_RDY0;
-		skt->stat[SOC_STAT_RDY].name = "CF ready";
-	} else {
-		skt->stat[SOC_STAT_CD].gpio = GPIO_E740_PCMCIA_CD1;
-		skt->stat[SOC_STAT_CD].name = "Wifi switch";
-		skt->stat[SOC_STAT_RDY].gpio = GPIO_E740_PCMCIA_RDY1;
-		skt->stat[SOC_STAT_RDY].name = "Wifi ready";
-	}
-
-	return 0;
-}
-
-static void e740_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-					struct pcmcia_state *state)
-{
-	state->vs_3v  = 1;
-	state->vs_Xv  = 0;
-}
-
-static int e740_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-					const socket_state_t *state)
-{
-	if (state->flags & SS_RESET) {
-		if (skt->nr == 0)
-			gpio_set_value(GPIO_E740_PCMCIA_RST0, 1);
-		else
-			gpio_set_value(GPIO_E740_PCMCIA_RST1, 1);
-	} else {
-		if (skt->nr == 0)
-			gpio_set_value(GPIO_E740_PCMCIA_RST0, 0);
-		else
-			gpio_set_value(GPIO_E740_PCMCIA_RST1, 0);
-	}
-
-	switch (state->Vcc) {
-	case 0:	/* Socket off */
-		if (skt->nr == 0)
-			gpio_set_value(GPIO_E740_PCMCIA_PWR0, 0);
-		else
-			gpio_set_value(GPIO_E740_PCMCIA_PWR1, 1);
-		break;
-	case 50:
-	case 33: /* socket on */
-		if (skt->nr == 0)
-			gpio_set_value(GPIO_E740_PCMCIA_PWR0, 1);
-		else
-			gpio_set_value(GPIO_E740_PCMCIA_PWR1, 0);
-		break;
-	default:
-		printk(KERN_ERR "e740_cs: Unsupported Vcc: %d\n", state->Vcc);
-	}
-
-	return 0;
-}
-
-static struct pcmcia_low_level e740_pcmcia_ops = {
-	.owner            = THIS_MODULE,
-	.hw_init          = e740_pcmcia_hw_init,
-	.socket_state     = e740_pcmcia_socket_state,
-	.configure_socket = e740_pcmcia_configure_socket,
-	.nr               = 2,
-};
-
-static struct platform_device *e740_pcmcia_device;
-
-static int __init e740_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_e740())
-		return -ENODEV;
-
-	e740_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!e740_pcmcia_device)
-		return -ENOMEM;
-
-	ret = platform_device_add_data(e740_pcmcia_device, &e740_pcmcia_ops,
-					sizeof(e740_pcmcia_ops));
-
-	if (!ret)
-		ret = platform_device_add(e740_pcmcia_device);
-
-	if (ret)
-		platform_device_put(e740_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit e740_pcmcia_exit(void)
-{
-	platform_device_unregister(e740_pcmcia_device);
-}
-
-module_init(e740_pcmcia_init);
-module_exit(e740_pcmcia_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
-MODULE_DESCRIPTION("e740 PCMCIA platform support");
diff --git a/arch/arm/mach-pxa/eseries-gpio.h b/arch/arm/mach-pxa/eseries-gpio.h
deleted file mode 100644
index 5c645600d401..000000000000
--- a/arch/arm/mach-pxa/eseries-gpio.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  eseries-gpio.h
- *
- *  Copyright (C) Ian Molton <spyro@f2s.com>
- */
-
-/* e-series power button */
-#define GPIO_ESERIES_POWERBTN     0
-
-/* UDC GPIO definitions */
-#define GPIO_E7XX_USB_DISC       13
-#define GPIO_E7XX_USB_PULLUP      3
-
-#define GPIO_E800_USB_DISC        4
-#define GPIO_E800_USB_PULLUP     84
-
-/* e740 PCMCIA GPIO definitions */
-/* Note: PWR1 seems to be inverted */
-#define GPIO_E740_PCMCIA_CD0      8
-#define GPIO_E740_PCMCIA_CD1     44
-#define GPIO_E740_PCMCIA_RDY0    11
-#define GPIO_E740_PCMCIA_RDY1     6
-#define GPIO_E740_PCMCIA_RST0    27
-#define GPIO_E740_PCMCIA_RST1    24
-#define GPIO_E740_PCMCIA_PWR0    20
-#define GPIO_E740_PCMCIA_PWR1    23
-
-/* e750 PCMCIA GPIO definitions */
-#define GPIO_E750_PCMCIA_CD0      8
-#define GPIO_E750_PCMCIA_RDY0    12
-#define GPIO_E750_PCMCIA_RST0    27
-#define GPIO_E750_PCMCIA_PWR0    20
-
-/* e800 PCMCIA GPIO definitions */
-#define GPIO_E800_PCMCIA_RST0    69
-#define GPIO_E800_PCMCIA_RST1    72
-#define GPIO_E800_PCMCIA_PWR0    20
-#define GPIO_E800_PCMCIA_PWR1    73
-
-/* e7xx IrDA power control */
-#define GPIO_E7XX_IR_OFF         38
-
-/* e740 audio control GPIOs */
-#define GPIO_E740_WM9705_nAVDD2  16
-#define GPIO_E740_MIC_ON         40
-#define GPIO_E740_AMP_ON         41
-
-/* e750 audio control GPIOs */
-#define GPIO_E750_HP_AMP_OFF      4
-#define GPIO_E750_SPK_AMP_OFF     7
-#define GPIO_E750_HP_DETECT      37
-
-/* e800 audio control GPIOs */
-#define GPIO_E800_HP_DETECT      81
-#define GPIO_E800_HP_AMP_OFF     82
-#define GPIO_E800_SPK_AMP_ON     83
-
-/* ASIC related GPIOs */
-#define GPIO_ESERIES_TMIO_IRQ        5
-#define GPIO_ESERIES_TMIO_PCLR      19
-#define GPIO_ESERIES_TMIO_SUSPEND   45
-#define GPIO_E800_ANGELX_IRQ      8
diff --git a/arch/arm/mach-pxa/eseries-irq.h b/arch/arm/mach-pxa/eseries-irq.h
deleted file mode 100644
index 572d573ce66b..000000000000
--- a/arch/arm/mach-pxa/eseries-irq.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  eseries-irq.h
- *
- *  Copyright (C) Ian Molton <spyro@f2s.com>
- */
-
-#define ANGELX_IRQ_BASE (IRQ_BOARD_START+8)
-#define IRQ_ANGELX(n) (ANGELX_IRQ_BASE + (n))
-
-#define ANGELX_RDY0_IRQ IRQ_ANGELX(0)
-#define ANGELX_ST0_IRQ  IRQ_ANGELX(1)
-#define ANGELX_CD0_IRQ  IRQ_ANGELX(2)
-#define ANGELX_RDY1_IRQ IRQ_ANGELX(3)
-#define ANGELX_ST1_IRQ  IRQ_ANGELX(4)
-#define ANGELX_CD1_IRQ  IRQ_ANGELX(5)
-
-#define TMIO_IRQ_BASE (IRQ_BOARD_START+0)
-#define IRQ_TMIO(n) (TMIO_IRQ_BASE + (n))
-
-#define TMIO_SD_IRQ     IRQ_TMIO(1)
-#define TMIO_USB_IRQ    IRQ_TMIO(2)
-
-#define ESERIES_NR_IRQS	(IRQ_BOARD_START + 16)
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
deleted file mode 100644
index 2e4daeab6278..000000000000
--- a/arch/arm/mach-pxa/eseries.c
+++ /dev/null
@@ -1,1001 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hardware definitions for the Toshiba eseries PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- */
-
-#include <linux/clkdev.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk-provider.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/tc6387xb.h>
-#include <linux/mfd/tc6393xb.h>
-#include <linux/mfd/t7l66xb.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/memblock.h>
-#include <linux/gpio/machine.h>
-
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include "pxa25x.h"
-#include "eseries-gpio.h"
-#include "eseries-irq.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include <linux/platform_data/video-pxafb.h>
-#include "udc.h"
-#include <linux/platform_data/irda-pxaficp.h>
-
-#include "devices.h"
-#include "generic.h"
-
-/* Only e800 has 128MB RAM */
-void __init eseries_fixup(struct tag *tags, char **cmdline)
-{
-	if (machine_is_e800())
-		memblock_add(0xa0000000, SZ_128M);
-	else
-		memblock_add(0xa0000000, SZ_64M);
-}
-
-static struct gpiod_lookup_table e7xx_gpio_vbus_gpiod_table __maybe_unused = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_E7XX_USB_DISC,
-			    "vbus", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO_E7XX_USB_PULLUP,
-			    "pullup", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct platform_device e7xx_gpio_vbus __maybe_unused = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-};
-
-struct pxaficp_platform_data e7xx_ficp_platform_data = {
-	.gpio_pwdown		= GPIO_E7XX_IR_OFF,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-int eseries_tmio_enable(struct platform_device *dev)
-{
-	/* Reset - bring SUSPEND high before PCLR */
-	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
-	gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
-	msleep(1);
-	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
-	msleep(1);
-	gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 1);
-	msleep(1);
-	return 0;
-}
-
-void eseries_tmio_disable(struct platform_device *dev)
-{
-	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
-	gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
-}
-
-int eseries_tmio_suspend(struct platform_device *dev)
-{
-	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
-	return 0;
-}
-
-int eseries_tmio_resume(struct platform_device *dev)
-{
-	gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
-	msleep(1);
-	return 0;
-}
-
-void eseries_get_tmio_gpios(void)
-{
-	gpio_request(GPIO_ESERIES_TMIO_SUSPEND, NULL);
-	gpio_request(GPIO_ESERIES_TMIO_PCLR, NULL);
-	gpio_direction_output(GPIO_ESERIES_TMIO_SUSPEND, 0);
-	gpio_direction_output(GPIO_ESERIES_TMIO_PCLR, 0);
-}
-
-/* TMIO controller uses the same resources on all e-series machines. */
-struct resource eseries_tmio_resources[] = {
-	[0] = {
-		.start  = PXA_CS4_PHYS,
-		.end    = PXA_CS4_PHYS + 0x1fffff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ),
-		.end    = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-/* Some e-series hardware cannot control the 32K clock */
-static void __init __maybe_unused eseries_register_clks(void)
-{
-	clk_register_fixed_rate(NULL, "CLK_CK32K", NULL, 0, 32768);
-}
-
-#ifdef CONFIG_MACH_E330
-/* -------------------- e330 tc6387xb parameters -------------------- */
-
-static struct tc6387xb_platform_data e330_tc6387xb_info = {
-	.enable   = &eseries_tmio_enable,
-	.suspend  = &eseries_tmio_suspend,
-	.resume   = &eseries_tmio_resume,
-};
-
-static struct platform_device e330_tc6387xb_device = {
-	.name           = "tc6387xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e330_tc6387xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* --------------------------------------------------------------- */
-
-static struct platform_device *e330_devices[] __initdata = {
-	&e330_tc6387xb_device,
-	&e7xx_gpio_vbus,
-};
-
-static void __init e330_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	eseries_register_clks();
-	eseries_get_tmio_gpios();
-	gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
-	platform_add_devices(ARRAY_AND_SIZE(e330_devices));
-}
-
-MACHINE_START(E330, "Toshiba e330")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e330_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E350
-/* -------------------- e350 t7l66xb parameters -------------------- */
-
-static struct t7l66xb_platform_data e350_t7l66xb_info = {
-	.irq_base               = IRQ_BOARD_START,
-	.enable                 = &eseries_tmio_enable,
-	.suspend                = &eseries_tmio_suspend,
-	.resume                 = &eseries_tmio_resume,
-};
-
-static struct platform_device e350_t7l66xb_device = {
-	.name           = "t7l66xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e350_t7l66xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* ---------------------------------------------------------- */
-
-static struct platform_device *e350_devices[] __initdata = {
-	&e350_t7l66xb_device,
-	&e7xx_gpio_vbus,
-};
-
-static void __init e350_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	eseries_register_clks();
-	eseries_get_tmio_gpios();
-	gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
-	platform_add_devices(ARRAY_AND_SIZE(e350_devices));
-}
-
-MACHINE_START(E350, "Toshiba e350")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e350_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E400
-/* ------------------------ E400 LCD definitions ------------------------ */
-
-static struct pxafb_mode_info e400_pxafb_mode_info = {
-	.pixclock       = 140703,
-	.xres           = 240,
-	.yres           = 320,
-	.bpp            = 16,
-	.hsync_len      = 4,
-	.left_margin    = 28,
-	.right_margin   = 8,
-	.vsync_len      = 3,
-	.upper_margin   = 5,
-	.lower_margin   = 6,
-	.sync           = 0,
-};
-
-static struct pxafb_mach_info e400_pxafb_mach_info = {
-	.modes          = &e400_pxafb_mode_info,
-	.num_modes      = 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP,
-	.lccr3          = 0,
-	.pxafb_backlight_power  = NULL,
-};
-
-/* ------------------------ E400 MFP config ----------------------------- */
-
-static unsigned long e400_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,   /* CS1 - Flash */
-	GPIO80_nCS_4,   /* CS4 - TMIO */
-
-	/* Clocks */
-	GPIO12_32KHz,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-
-	/* TMIO controller */
-	GPIO19_GPIO, /* t7l66xb #PCLR */
-	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
-	/* wakeup */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* ---------------------------------------------------------------------- */
-
-static struct mtd_partition partition_a = {
-	.name = "Internal NAND flash",
-	.offset =  0,
-	.size =  MTDPART_SIZ_FULL,
-};
-
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr e400_t7l66xb_nand_bbt = {
-	.options = 0,
-	.offs = 4,
-	.len = 2,
-	.pattern = scan_ff_pattern
-};
-
-static struct tmio_nand_data e400_t7l66xb_nand_config = {
-	.num_partitions = 1,
-	.partition = &partition_a,
-	.badblock_pattern = &e400_t7l66xb_nand_bbt,
-};
-
-static struct t7l66xb_platform_data e400_t7l66xb_info = {
-	.irq_base 		= IRQ_BOARD_START,
-	.enable                 = &eseries_tmio_enable,
-	.suspend                = &eseries_tmio_suspend,
-	.resume                 = &eseries_tmio_resume,
-
-	.nand_data              = &e400_t7l66xb_nand_config,
-};
-
-static struct platform_device e400_t7l66xb_device = {
-	.name           = "t7l66xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e400_t7l66xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-/* ---------------------------------------------------------- */
-
-static struct platform_device *e400_devices[] __initdata = {
-	&e400_t7l66xb_device,
-	&e7xx_gpio_vbus,
-};
-
-static void __init e400_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	/* Fixme - e400 may have a switched clock */
-	eseries_register_clks();
-	eseries_get_tmio_gpios();
-	pxa_set_fb_info(NULL, &e400_pxafb_mach_info);
-	gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
-	platform_add_devices(ARRAY_AND_SIZE(e400_devices));
-}
-
-MACHINE_START(E400, "Toshiba e400")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e400_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E740
-/* ------------------------ e740 video support --------------------------- */
-
-static struct w100_gen_regs e740_lcd_regs = {
-	.lcd_format =            0x00008023,
-	.lcdd_cntl1 =            0x0f000000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x00ffff03,
-	.genlcd_cntl2 =          0x003c0f03,
-	.genlcd_cntl3 =          0x000143aa,
-};
-
-static struct w100_mode e740_lcd_mode = {
-	.xres            = 240,
-	.yres            = 320,
-	.left_margin     = 20,
-	.right_margin    = 28,
-	.upper_margin    = 9,
-	.lower_margin    = 8,
-	.crtc_ss         = 0x80140013,
-	.crtc_ls         = 0x81150110,
-	.crtc_gs         = 0x80050005,
-	.crtc_vpos_gs    = 0x000a0009,
-	.crtc_rev        = 0x0040010a,
-	.crtc_dclk       = 0xa906000a,
-	.crtc_gclk       = 0x80050108,
-	.crtc_goe        = 0x80050108,
-	.pll_freq        = 57,
-	.pixclk_divider         = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_XTAL,
-	.sysclk_divider  = 1,
-	.sysclk_src     = CLK_SRC_PLL,
-	.crtc_ps1_active =       0x41060010,
-};
-
-static struct w100_gpio_regs e740_w100_gpio_info = {
-	.init_data1 = 0x21002103,
-	.gpio_dir1  = 0xffffdeff,
-	.gpio_oe1   = 0x03c00643,
-	.init_data2 = 0x003f003f,
-	.gpio_dir2  = 0xffffffff,
-	.gpio_oe2   = 0x000000ff,
-};
-
-static struct w100fb_mach_info e740_fb_info = {
-	.modelist   = &e740_lcd_mode,
-	.num_modes  = 1,
-	.regs       = &e740_lcd_regs,
-	.gpio       = &e740_w100_gpio_info,
-	.xtal_freq = 14318000,
-	.xtal_dbl   = 1,
-};
-
-static struct resource e740_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device e740_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e740_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e740_fb_resources),
-	.resource       = e740_fb_resources,
-};
-
-/* --------------------------- MFP Pin config -------------------------- */
-
-static unsigned long e740_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,   /* CS1 - Flash */
-	GPIO79_nCS_3,   /* CS3 - IMAGEON */
-	GPIO80_nCS_4,   /* CS4 - TMIO */
-
-	/* Clocks */
-	GPIO12_32KHz,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-
-	/* TMIO controller */
-	GPIO19_GPIO, /* t7l66xb #PCLR */
-	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
-	/* UDC */
-	GPIO13_GPIO,
-	GPIO3_GPIO,
-
-	/* IrDA */
-	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* Audio power control */
-	GPIO16_GPIO,  /* AC97 codec AVDD2 supply (analogue power) */
-	GPIO40_GPIO,  /* Mic amp power */
-	GPIO41_GPIO,  /* Headphone amp power */
-
-	/* PC Card */
-	GPIO8_GPIO,   /* CD0 */
-	GPIO44_GPIO,  /* CD1 */
-	GPIO11_GPIO,  /* IRQ0 */
-	GPIO6_GPIO,   /* IRQ1 */
-	GPIO27_GPIO,  /* RST0 */
-	GPIO24_GPIO,  /* RST1 */
-	GPIO20_GPIO,  /* PWR0 */
-	GPIO23_GPIO,  /* PWR1 */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* wakeup */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* -------------------- e740 t7l66xb parameters -------------------- */
-
-static struct t7l66xb_platform_data e740_t7l66xb_info = {
-	.irq_base 		= IRQ_BOARD_START,
-	.enable                 = &eseries_tmio_enable,
-	.suspend                = &eseries_tmio_suspend,
-	.resume                 = &eseries_tmio_resume,
-};
-
-static struct platform_device e740_t7l66xb_device = {
-	.name           = "t7l66xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e740_t7l66xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-static struct platform_device e740_audio_device = {
-	.name		= "e740-audio",
-	.id		= -1,
-};
-
-static struct gpiod_lookup_table e740_audio_gpio_table = {
-	.dev_id = "e740-audio",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa",  GPIO_E740_WM9705_nAVDD2, "Audio power",  GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa",  GPIO_E740_AMP_ON, "Output amp",  GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa",  GPIO_E740_MIC_ON, "Mic amp", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/* ----------------------------------------------------------------------- */
-
-static struct platform_device *e740_devices[] __initdata = {
-	&e740_fb_device,
-	&e740_t7l66xb_device,
-	&e7xx_gpio_vbus,
-	&e740_audio_device,
-};
-
-static void __init e740_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	eseries_register_clks();
-	clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
-			"UDCCLK", &pxa25x_device_udc.dev),
-	eseries_get_tmio_gpios();
-	gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
-	gpiod_add_lookup_table(&e740_audio_gpio_table);
-	platform_add_devices(ARRAY_AND_SIZE(e740_devices));
-	pxa_set_ac97_info(NULL);
-	pxa_set_ficp_info(&e7xx_ficp_platform_data);
-}
-
-MACHINE_START(E740, "Toshiba e740")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e740_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E750
-/* ---------------------- E750 LCD definitions -------------------- */
-
-static struct w100_gen_regs e750_lcd_regs = {
-	.lcd_format =            0x00008003,
-	.lcdd_cntl1 =            0x00000000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x00fff003,
-	.genlcd_cntl2 =          0x003c0f03,
-	.genlcd_cntl3 =          0x000143aa,
-};
-
-static struct w100_mode e750_lcd_mode = {
-	.xres            = 240,
-	.yres            = 320,
-	.left_margin     = 21,
-	.right_margin    = 22,
-	.upper_margin    = 5,
-	.lower_margin    = 4,
-	.crtc_ss         = 0x80150014,
-	.crtc_ls         = 0x8014000d,
-	.crtc_gs         = 0xc1000005,
-	.crtc_vpos_gs    = 0x00020147,
-	.crtc_rev        = 0x0040010a,
-	.crtc_dclk       = 0xa1700030,
-	.crtc_gclk       = 0x80cc0015,
-	.crtc_goe        = 0x80cc0015,
-	.crtc_ps1_active = 0x61060017,
-	.pll_freq        = 57,
-	.pixclk_divider         = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_XTAL,
-	.sysclk_divider  = 1,
-	.sysclk_src     = CLK_SRC_PLL,
-};
-
-static struct w100_gpio_regs e750_w100_gpio_info = {
-	.init_data1 = 0x01192f1b,
-	.gpio_dir1  = 0xd5ffdeff,
-	.gpio_oe1   = 0x000020bf,
-	.init_data2 = 0x010f010f,
-	.gpio_dir2  = 0xffffffff,
-	.gpio_oe2   = 0x000001cf,
-};
-
-static struct w100fb_mach_info e750_fb_info = {
-	.modelist   = &e750_lcd_mode,
-	.num_modes  = 1,
-	.regs       = &e750_lcd_regs,
-	.gpio       = &e750_w100_gpio_info,
-	.xtal_freq  = 14318000,
-	.xtal_dbl   = 1,
-};
-
-static struct resource e750_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device e750_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e750_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e750_fb_resources),
-	.resource       = e750_fb_resources,
-};
-
-/* -------------------- e750 MFP parameters -------------------- */
-
-static unsigned long e750_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,   /* CS1 - Flash */
-	GPIO79_nCS_3,   /* CS3 - IMAGEON */
-	GPIO80_nCS_4,   /* CS4 - TMIO */
-
-	/* Clocks */
-	GPIO11_3_6MHz,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-
-	/* TMIO controller */
-	GPIO19_GPIO, /* t7l66xb #PCLR */
-	GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
-	/* UDC */
-	GPIO13_GPIO,
-	GPIO3_GPIO,
-
-	/* IrDA */
-	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* Audio power control */
-	GPIO4_GPIO,  /* Headphone amp power */
-	GPIO7_GPIO,  /* Speaker amp power */
-	GPIO37_GPIO, /* Headphone detect */
-
-	/* PC Card */
-	GPIO8_GPIO,   /* CD0 */
-	GPIO44_GPIO,  /* CD1 */
-	/* GPIO11_GPIO,  IRQ0 */
-	GPIO6_GPIO,   /* IRQ1 */
-	GPIO27_GPIO,  /* RST0 */
-	GPIO24_GPIO,  /* RST1 */
-	GPIO20_GPIO,  /* PWR0 */
-	GPIO23_GPIO,  /* PWR1 */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* wakeup */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* ----------------- e750 tc6393xb parameters ------------------ */
-
-static struct tc6393xb_platform_data e750_tc6393xb_info = {
-	.irq_base       = IRQ_BOARD_START,
-	.scr_pll2cr     = 0x0cc1,
-	.scr_gper       = 0,
-	.suspend        = &eseries_tmio_suspend,
-	.resume         = &eseries_tmio_resume,
-	.enable         = &eseries_tmio_enable,
-	.disable        = &eseries_tmio_disable,
-};
-
-static struct platform_device e750_tc6393xb_device = {
-	.name           = "tc6393xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e750_tc6393xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-static struct gpiod_lookup_table e750_audio_gpio_table = {
-	.dev_id = "e750-audio",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa",  GPIO_E750_HP_AMP_OFF, "Output amp",  GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa",  GPIO_E750_SPK_AMP_OFF, "Mic amp", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct platform_device e750_audio_device = {
-	.name		= "e750-audio",
-	.id		= -1,
-};
-
-/* ------------------------------------------------------------- */
-
-static struct platform_device *e750_devices[] __initdata = {
-	&e750_fb_device,
-	&e750_tc6393xb_device,
-	&e7xx_gpio_vbus,
-	&e750_audio_device,
-};
-
-static void __init e750_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
-			"GPIO11_CLK", NULL),
-	eseries_get_tmio_gpios();
-	gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
-	gpiod_add_lookup_table(&e750_audio_gpio_table);
-	platform_add_devices(ARRAY_AND_SIZE(e750_devices));
-	pxa_set_ac97_info(NULL);
-	pxa_set_ficp_info(&e7xx_ficp_platform_data);
-}
-
-MACHINE_START(E750, "Toshiba e750")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e750_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E800
-/* ------------------------ e800 LCD definitions ------------------------- */
-
-static unsigned long e800_pin_config[] __initdata = {
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* tc6393xb */
-	GPIO11_3_6MHz,
-};
-
-static struct w100_gen_regs e800_lcd_regs = {
-	.lcd_format =            0x00008003,
-	.lcdd_cntl1 =            0x02a00000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x000ff2a3,
-	.genlcd_cntl2 =          0x000002a3,
-	.genlcd_cntl3 =          0x000102aa,
-};
-
-static struct w100_mode e800_lcd_mode[2] = {
-	[0] = {
-		.xres            = 480,
-		.yres            = 640,
-		.left_margin     = 52,
-		.right_margin    = 148,
-		.upper_margin    = 2,
-		.lower_margin    = 6,
-		.crtc_ss         = 0x80350034,
-		.crtc_ls         = 0x802b0026,
-		.crtc_gs         = 0x80160016,
-		.crtc_vpos_gs    = 0x00020003,
-		.crtc_rev        = 0x0040001d,
-		.crtc_dclk       = 0xe0000000,
-		.crtc_gclk       = 0x82a50049,
-		.crtc_goe        = 0x80ee001c,
-		.crtc_ps1_active = 0x00000000,
-		.pll_freq        = 128,
-		.pixclk_divider         = 4,
-		.pixclk_divider_rotated = 6,
-		.pixclk_src     = CLK_SRC_PLL,
-		.sysclk_divider  = 0,
-		.sysclk_src     = CLK_SRC_PLL,
-	},
-	[1] = {
-		.xres            = 240,
-		.yres            = 320,
-		.left_margin     = 15,
-		.right_margin    = 88,
-		.upper_margin    = 0,
-		.lower_margin    = 7,
-		.crtc_ss         = 0xd010000f,
-		.crtc_ls         = 0x80070003,
-		.crtc_gs         = 0x80000000,
-		.crtc_vpos_gs    = 0x01460147,
-		.crtc_rev        = 0x00400003,
-		.crtc_dclk       = 0xa1700030,
-		.crtc_gclk       = 0x814b0008,
-		.crtc_goe        = 0x80cc0015,
-		.crtc_ps1_active = 0x00000000,
-		.pll_freq        = 100,
-		.pixclk_divider         = 6, /* Wince uses 14 which gives a */
-		.pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
-		.pixclk_src     = CLK_SRC_PLL,
-		.sysclk_divider  = 0,
-		.sysclk_src     = CLK_SRC_PLL,
-	}
-};
-
-
-static struct w100_gpio_regs e800_w100_gpio_info = {
-	.init_data1 = 0xc13fc019,
-	.gpio_dir1  = 0x3e40df7f,
-	.gpio_oe1   = 0x003c3000,
-	.init_data2 = 0x00000000,
-	.gpio_dir2  = 0x00000000,
-	.gpio_oe2   = 0x00000000,
-};
-
-static struct w100_mem_info e800_w100_mem_info = {
-	.ext_cntl        = 0x09640011,
-	.sdram_mode_reg  = 0x00600021,
-	.ext_timing_cntl = 0x10001545,
-	.io_cntl         = 0x7ddd7333,
-	.size            = 0x1fffff,
-};
-
-static void e800_tg_change(struct w100fb_par *par)
-{
-	unsigned long tmp;
-
-	tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
-	if (par->mode->xres == 480)
-		tmp |= 0x100;
-	else
-		tmp &= ~0x100;
-	w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
-}
-
-static struct w100_tg_info e800_tg_info = {
-	.change = e800_tg_change,
-};
-
-static struct w100fb_mach_info e800_fb_info = {
-	.modelist   = e800_lcd_mode,
-	.num_modes  = 2,
-	.regs       = &e800_lcd_regs,
-	.gpio       = &e800_w100_gpio_info,
-	.mem        = &e800_w100_mem_info,
-	.tg         = &e800_tg_info,
-	.xtal_freq  = 16000000,
-};
-
-static struct resource e800_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device e800_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e800_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e800_fb_resources),
-	.resource       = e800_fb_resources,
-};
-
-/* --------------------------- UDC definitions --------------------------- */
-
-static struct gpiod_lookup_table e800_gpio_vbus_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_E800_USB_DISC,
-			    "vbus", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO_E800_USB_PULLUP,
-			    "pullup", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct platform_device e800_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-};
-
-
-/* ----------------- e800 tc6393xb parameters ------------------ */
-
-static struct tc6393xb_platform_data e800_tc6393xb_info = {
-	.irq_base       = IRQ_BOARD_START,
-	.scr_pll2cr     = 0x0cc1,
-	.scr_gper       = 0,
-	.suspend        = &eseries_tmio_suspend,
-	.resume         = &eseries_tmio_resume,
-	.enable         = &eseries_tmio_enable,
-	.disable        = &eseries_tmio_disable,
-};
-
-static struct platform_device e800_tc6393xb_device = {
-	.name           = "tc6393xb",
-	.id             = -1,
-	.dev            = {
-		.platform_data = &e800_tc6393xb_info,
-	},
-	.num_resources = 2,
-	.resource      = eseries_tmio_resources,
-};
-
-static struct gpiod_lookup_table e800_audio_gpio_table = {
-	.dev_id = "e800-audio",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa",  GPIO_E800_HP_AMP_OFF, "Output amp",  GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa",  GPIO_E800_SPK_AMP_ON, "Mic amp", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device e800_audio_device = {
-	.name		= "e800-audio",
-	.id		= -1,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static struct platform_device *e800_devices[] __initdata = {
-	&e800_fb_device,
-	&e800_tc6393xb_device,
-	&e800_gpio_vbus,
-	&e800_audio_device,
-};
-
-static void __init e800_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
-			"GPIO11_CLK", NULL),
-	eseries_get_tmio_gpios();
-	gpiod_add_lookup_table(&e800_gpio_vbus_gpiod_table);
-	gpiod_add_lookup_table(&e800_audio_gpio_table);
-	platform_add_devices(ARRAY_AND_SIZE(e800_devices));
-	pxa_set_ac97_info(NULL);
-}
-
-MACHINE_START(E800, "Toshiba e800")
-	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= ESERIES_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.fixup		= eseries_fixup,
-	.init_machine	= e800_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
deleted file mode 100644
index 69c2ec02a16c..000000000000
--- a/arch/arm/mach-pxa/ezx.c
+++ /dev/null
@@ -1,1254 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  ezx.c - Common code for the EZX platform.
- *
- *  Copyright (C) 2005-2006 Harald Welte <laforge@openezx.org>,
- *		  2007-2008 Daniel Ribeiro <drwyrm@gmail.com>,
- *		  2007-2008 Stefan Schmidt <stefan@datenfreihafen.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio_keys.h>
-#include <linux/leds-lp3944.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "pxa27x.h"
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include <linux/platform_data/media/camera-pxa.h>
-
-#include "devices.h"
-#include "generic.h"
-
-#define EZX_NR_IRQS			(IRQ_BOARD_START + 24)
-
-#define GPIO12_A780_FLIP_LID 		12
-#define GPIO15_A1200_FLIP_LID 		15
-#define GPIO15_A910_FLIP_LID 		15
-#define GPIO12_E680_LOCK_SWITCH 	12
-#define GPIO15_E6_LOCK_SWITCH 		15
-#define GPIO50_nCAM_EN			50
-#define GPIO19_GEN1_CAM_RST		19
-#define GPIO28_GEN2_CAM_RST		28
-
-static struct pwm_lookup ezx_pwm_lookup[] __maybe_unused = {
-	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78700,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data ezx_backlight_data = {
-	.max_brightness	= 1023,
-	.dft_brightness	= 1023,
-};
-
-static struct platform_device ezx_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent	= &pxa27x_device_pwm0.dev,
-		.platform_data = &ezx_backlight_data,
-	},
-};
-
-static struct pxafb_mode_info mode_ezx_old = {
-	.pixclock		= 150000,
-	.xres			= 240,
-	.yres			= 320,
-	.bpp			= 16,
-	.hsync_len		= 10,
-	.left_margin		= 20,
-	.right_margin		= 10,
-	.vsync_len		= 2,
-	.upper_margin		= 3,
-	.lower_margin		= 2,
-	.sync			= 0,
-};
-
-static struct pxafb_mach_info ezx_fb_info_1 __maybe_unused = {
-	.modes		= &mode_ezx_old,
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP,
-};
-
-static struct pxafb_mode_info mode_72r89803y01 = {
-	.pixclock		= 192308,
-	.xres			= 240,
-	.yres			= 320,
-	.bpp			= 32,
-	.depth			= 18,
-	.hsync_len		= 10,
-	.left_margin		= 20,
-	.right_margin		= 10,
-	.vsync_len		= 2,
-	.upper_margin		= 3,
-	.lower_margin		= 2,
-	.sync			= 0,
-};
-
-static struct pxafb_mach_info ezx_fb_info_2 __maybe_unused = {
-	.modes		= &mode_72r89803y01,
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_TFT_18BPP,
-};
-
-static struct platform_device *ezx_devices[] __initdata __maybe_unused = {
-	&ezx_backlight_device,
-};
-
-static unsigned long ezx_pin_config[] __initdata __maybe_unused = {
-	/* PWM backlight */
-	GPIO16_PWM0_OUT,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* PCAP SSP */
-	GPIO29_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-	GPIO24_GPIO,				/* pcap chip select */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,	/* pcap interrupt */
-	GPIO4_GPIO | MFP_LPM_DRIVE_HIGH,	/* WDI_AP */
-	GPIO55_GPIO | MFP_LPM_DRIVE_HIGH,	/* SYS_RESTART */
-
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO11_GPIO,				/* mmc detect */
-
-	/* usb to external transceiver */
-	GPIO34_USB_P2_2,
-	GPIO35_USB_P2_1,
-	GPIO36_USB_P2_4,
-	GPIO39_USB_P2_6,
-	GPIO40_USB_P2_5,
-	GPIO53_USB_P2_3,
-
-	/* usb to Neptune GSM chip */
-	GPIO30_USB_P3_2,
-	GPIO31_USB_P3_6,
-	GPIO90_USB_P3_5,
-	GPIO91_USB_P3_1,
-	GPIO56_USB_P3_4,
-	GPIO113_USB_P3_3,
-};
-
-#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680)
-static unsigned long gen1_pin_config[] __initdata = {
-	/* flip / lockswitch */
-	GPIO12_GPIO | WAKEUP_ON_EDGE_BOTH,
-
-	/* bluetooth (bcm2035) */
-	GPIO14_GPIO | WAKEUP_ON_EDGE_RISE,	/* HOSTWAKE */
-	GPIO48_GPIO,				/* RESET */
-	GPIO28_GPIO,				/* WAKEUP */
-
-	/* Neptune handshake */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_FALL,	/* BP_RDY */
-	GPIO57_GPIO | MFP_LPM_DRIVE_HIGH,	/* AP_RDY */
-	GPIO13_GPIO | WAKEUP_ON_EDGE_BOTH,	/* WDI */
-	GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH,	/* WDI2 */
-	GPIO82_GPIO | MFP_LPM_DRIVE_HIGH,	/* RESET */
-	GPIO99_GPIO | MFP_LPM_DRIVE_HIGH,	/* TC_MM_EN */
-
-	/* sound */
-	GPIO52_SSP3_SCLK,
-	GPIO83_SSP3_SFRM,
-	GPIO81_SSP3_TXD,
-	GPIO89_SSP3_RXD,
-
-	/* ssp2 pins to in */
-	GPIO22_GPIO,				/* SSP2_SCLK */
-	GPIO37_GPIO,				/* SSP2_SFRM */
-	GPIO38_GPIO,				/* SSP2_TXD */
-	GPIO88_GPIO,				/* SSP2_RXD */
-
-	/* camera */
-	GPIO23_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO85_CIF_LV,
-	GPIO84_CIF_FV,
-	GPIO27_CIF_DD_0,
-	GPIO114_CIF_DD_1,
-	GPIO51_CIF_DD_2,
-	GPIO115_CIF_DD_3,
-	GPIO95_CIF_DD_4,
-	GPIO94_CIF_DD_5,
-	GPIO17_CIF_DD_6,
-	GPIO108_CIF_DD_7,
-	GPIO50_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_EN */
-	GPIO19_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_RST */
-
-	/* EMU */
-	GPIO120_GPIO,				/* EMU_MUX1 */
-	GPIO119_GPIO,				/* EMU_MUX2 */
-	GPIO86_GPIO,				/* SNP_INT_CTL */
-	GPIO87_GPIO,				/* SNP_INT_IN */
-};
-#endif
-
-#if defined(CONFIG_MACH_EZX_A1200) || defined(CONFIG_MACH_EZX_A910) || \
-	defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6)
-static unsigned long gen2_pin_config[] __initdata = {
-	/* flip / lockswitch */
-	GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,
-
-	/* EOC */
-	GPIO10_GPIO | WAKEUP_ON_EDGE_RISE,
-
-	/* bluetooth (bcm2045) */
-	GPIO13_GPIO | WAKEUP_ON_EDGE_RISE,	/* HOSTWAKE */
-	GPIO37_GPIO,				/* RESET */
-	GPIO57_GPIO,				/* WAKEUP */
-
-	/* Neptune handshake */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_FALL,	/* BP_RDY */
-	GPIO96_GPIO | MFP_LPM_DRIVE_HIGH,	/* AP_RDY */
-	GPIO3_GPIO | WAKEUP_ON_EDGE_FALL,	/* WDI */
-	GPIO116_GPIO | MFP_LPM_DRIVE_HIGH,	/* RESET */
-	GPIO41_GPIO,				/* BP_FLASH */
-
-	/* sound */
-	GPIO52_SSP3_SCLK,
-	GPIO83_SSP3_SFRM,
-	GPIO81_SSP3_TXD,
-	GPIO82_SSP3_RXD,
-
-	/* ssp2 pins to in */
-	GPIO22_GPIO,				/* SSP2_SCLK */
-	GPIO14_GPIO,				/* SSP2_SFRM */
-	GPIO38_GPIO,				/* SSP2_TXD */
-	GPIO88_GPIO,				/* SSP2_RXD */
-
-	/* camera */
-	GPIO23_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO85_CIF_LV,
-	GPIO84_CIF_FV,
-	GPIO27_CIF_DD_0,
-	GPIO114_CIF_DD_1,
-	GPIO51_CIF_DD_2,
-	GPIO115_CIF_DD_3,
-	GPIO95_CIF_DD_4,
-	GPIO48_CIF_DD_5,
-	GPIO93_CIF_DD_6,
-	GPIO12_CIF_DD_7,
-	GPIO50_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_EN */
-	GPIO28_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_RST */
-	GPIO17_GPIO,				/* CAM_FLASH */
-};
-#endif
-
-#ifdef CONFIG_MACH_EZX_A780
-static unsigned long a780_pin_config[] __initdata = {
-	/* keypad */
-	GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-
-	/* attenuate sound */
-	GPIO96_GPIO,
-};
-#endif
-
-#ifdef CONFIG_MACH_EZX_E680
-static unsigned long e680_pin_config[] __initdata = {
-	/* keypad */
-	GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO96_KP_DKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_DKIN_4 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_DKIN_5 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-
-	/* MIDI */
-	GPIO79_GPIO,				/* VA_SEL_BUL */
-	GPIO80_GPIO,				/* FLT_SEL_BUL */
-	GPIO78_GPIO,				/* MIDI_RESET */
-	GPIO33_GPIO,				/* MIDI_CS */
-	GPIO15_GPIO,				/* MIDI_IRQ */
-	GPIO49_GPIO,				/* MIDI_NPWE */
-	GPIO18_GPIO,				/* MIDI_RDY */
-
-	/* leds */
-	GPIO46_GPIO,
-	GPIO47_GPIO,
-};
-#endif
-
-#ifdef CONFIG_MACH_EZX_A1200
-static unsigned long a1200_pin_config[] __initdata = {
-	/* keypad */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-};
-#endif
-
-#ifdef CONFIG_MACH_EZX_A910
-static unsigned long a910_pin_config[] __initdata = {
-	/* keypad */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-
-	/* WLAN */
-	GPIO89_GPIO,				/* RESET */
-	GPIO33_GPIO,				/* WAKEUP */
-	GPIO94_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* HOSTWAKE */
-
-	/* MMC CS */
-	GPIO20_GPIO,
-};
-#endif
-
-#ifdef CONFIG_MACH_EZX_E2
-static unsigned long e2_pin_config[] __initdata = {
-	/* keypad */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-};
-#endif
-
-#ifdef CONFIG_MACH_EZX_E6
-static unsigned long e6_pin_config[] __initdata = {
-	/* keypad */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-};
-#endif
-
-/* KEYPAD */
-#ifdef CONFIG_MACH_EZX_A780
-static const unsigned int a780_key_map[] = {
-	KEY(0, 0, KEY_SEND),
-	KEY(0, 1, KEY_BACK),
-	KEY(0, 2, KEY_END),
-	KEY(0, 3, KEY_PAGEUP),
-	KEY(0, 4, KEY_UP),
-
-	KEY(1, 0, KEY_NUMERIC_1),
-	KEY(1, 1, KEY_NUMERIC_2),
-	KEY(1, 2, KEY_NUMERIC_3),
-	KEY(1, 3, KEY_SELECT),
-	KEY(1, 4, KEY_KPENTER),
-
-	KEY(2, 0, KEY_NUMERIC_4),
-	KEY(2, 1, KEY_NUMERIC_5),
-	KEY(2, 2, KEY_NUMERIC_6),
-	KEY(2, 3, KEY_RECORD),
-	KEY(2, 4, KEY_LEFT),
-
-	KEY(3, 0, KEY_NUMERIC_7),
-	KEY(3, 1, KEY_NUMERIC_8),
-	KEY(3, 2, KEY_NUMERIC_9),
-	KEY(3, 3, KEY_HOME),
-	KEY(3, 4, KEY_RIGHT),
-
-	KEY(4, 0, KEY_NUMERIC_STAR),
-	KEY(4, 1, KEY_NUMERIC_0),
-	KEY(4, 2, KEY_NUMERIC_POUND),
-	KEY(4, 3, KEY_PAGEDOWN),
-	KEY(4, 4, KEY_DOWN),
-};
-
-static struct matrix_keymap_data a780_matrix_keymap_data = {
-	.keymap			= a780_key_map,
-	.keymap_size		= ARRAY_SIZE(a780_key_map),
-};
-
-static struct pxa27x_keypad_platform_data a780_keypad_platform_data = {
-	.matrix_key_rows = 5,
-	.matrix_key_cols = 5,
-	.matrix_keymap_data = &a780_matrix_keymap_data,
-
-	.direct_key_map = { KEY_CAMERA },
-	.direct_key_num = 1,
-
-	.debounce_interval = 30,
-};
-#endif /* CONFIG_MACH_EZX_A780 */
-
-#ifdef CONFIG_MACH_EZX_E680
-static const unsigned int e680_key_map[] = {
-	KEY(0, 0, KEY_UP),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_RESERVED),
-	KEY(0, 3, KEY_SEND),
-
-	KEY(1, 0, KEY_DOWN),
-	KEY(1, 1, KEY_LEFT),
-	KEY(1, 2, KEY_PAGEUP),
-	KEY(1, 3, KEY_PAGEDOWN),
-
-	KEY(2, 0, KEY_RESERVED),
-	KEY(2, 1, KEY_RESERVED),
-	KEY(2, 2, KEY_RESERVED),
-	KEY(2, 3, KEY_KPENTER),
-};
-
-static struct matrix_keymap_data e680_matrix_keymap_data = {
-	.keymap			= e680_key_map,
-	.keymap_size		= ARRAY_SIZE(e680_key_map),
-};
-
-static struct pxa27x_keypad_platform_data e680_keypad_platform_data = {
-	.matrix_key_rows = 3,
-	.matrix_key_cols = 4,
-	.matrix_keymap_data = &e680_matrix_keymap_data,
-
-	.direct_key_map = {
-		KEY_CAMERA,
-		KEY_RESERVED,
-		KEY_RESERVED,
-		KEY_F1,
-		KEY_CANCEL,
-		KEY_F2,
-	},
-	.direct_key_num = 6,
-
-	.debounce_interval = 30,
-};
-#endif /* CONFIG_MACH_EZX_E680 */
-
-#ifdef CONFIG_MACH_EZX_A1200
-static const unsigned int a1200_key_map[] = {
-	KEY(0, 0, KEY_RESERVED),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_PAGEDOWN),
-	KEY(0, 3, KEY_RESERVED),
-	KEY(0, 4, KEY_RESERVED),
-	KEY(0, 5, KEY_RESERVED),
-
-	KEY(1, 0, KEY_RESERVED),
-	KEY(1, 1, KEY_DOWN),
-	KEY(1, 2, KEY_CAMERA),
-	KEY(1, 3, KEY_RESERVED),
-	KEY(1, 4, KEY_RESERVED),
-	KEY(1, 5, KEY_RESERVED),
-
-	KEY(2, 0, KEY_RESERVED),
-	KEY(2, 1, KEY_KPENTER),
-	KEY(2, 2, KEY_RECORD),
-	KEY(2, 3, KEY_RESERVED),
-	KEY(2, 4, KEY_RESERVED),
-	KEY(2, 5, KEY_SELECT),
-
-	KEY(3, 0, KEY_RESERVED),
-	KEY(3, 1, KEY_UP),
-	KEY(3, 2, KEY_SEND),
-	KEY(3, 3, KEY_RESERVED),
-	KEY(3, 4, KEY_RESERVED),
-	KEY(3, 5, KEY_RESERVED),
-
-	KEY(4, 0, KEY_RESERVED),
-	KEY(4, 1, KEY_LEFT),
-	KEY(4, 2, KEY_PAGEUP),
-	KEY(4, 3, KEY_RESERVED),
-	KEY(4, 4, KEY_RESERVED),
-	KEY(4, 5, KEY_RESERVED),
-};
-
-static struct matrix_keymap_data a1200_matrix_keymap_data = {
-	.keymap			= a1200_key_map,
-	.keymap_size		= ARRAY_SIZE(a1200_key_map),
-};
-
-static struct pxa27x_keypad_platform_data a1200_keypad_platform_data = {
-	.matrix_key_rows = 5,
-	.matrix_key_cols = 6,
-	.matrix_keymap_data = &a1200_matrix_keymap_data,
-
-	.debounce_interval = 30,
-};
-#endif /* CONFIG_MACH_EZX_A1200 */
-
-#ifdef CONFIG_MACH_EZX_E6
-static const unsigned int e6_key_map[] = {
-	KEY(0, 0, KEY_RESERVED),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_PAGEDOWN),
-	KEY(0, 3, KEY_RESERVED),
-	KEY(0, 4, KEY_RESERVED),
-	KEY(0, 5, KEY_NEXTSONG),
-
-	KEY(1, 0, KEY_RESERVED),
-	KEY(1, 1, KEY_DOWN),
-	KEY(1, 2, KEY_PROG1),
-	KEY(1, 3, KEY_RESERVED),
-	KEY(1, 4, KEY_RESERVED),
-	KEY(1, 5, KEY_RESERVED),
-
-	KEY(2, 0, KEY_RESERVED),
-	KEY(2, 1, KEY_ENTER),
-	KEY(2, 2, KEY_CAMERA),
-	KEY(2, 3, KEY_RESERVED),
-	KEY(2, 4, KEY_RESERVED),
-	KEY(2, 5, KEY_WWW),
-
-	KEY(3, 0, KEY_RESERVED),
-	KEY(3, 1, KEY_UP),
-	KEY(3, 2, KEY_SEND),
-	KEY(3, 3, KEY_RESERVED),
-	KEY(3, 4, KEY_RESERVED),
-	KEY(3, 5, KEY_PLAYPAUSE),
-
-	KEY(4, 0, KEY_RESERVED),
-	KEY(4, 1, KEY_LEFT),
-	KEY(4, 2, KEY_PAGEUP),
-	KEY(4, 3, KEY_RESERVED),
-	KEY(4, 4, KEY_RESERVED),
-	KEY(4, 5, KEY_PREVIOUSSONG),
-};
-
-static struct matrix_keymap_data e6_keymap_data = {
-	.keymap			= e6_key_map,
-	.keymap_size		= ARRAY_SIZE(e6_key_map),
-};
-
-static struct pxa27x_keypad_platform_data e6_keypad_platform_data = {
-	.matrix_key_rows = 5,
-	.matrix_key_cols = 6,
-	.matrix_keymap_data = &e6_keymap_data,
-
-	.debounce_interval = 30,
-};
-#endif /* CONFIG_MACH_EZX_E6 */
-
-#ifdef CONFIG_MACH_EZX_A910
-static const unsigned int a910_key_map[] = {
-	KEY(0, 0, KEY_NUMERIC_6),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_PAGEDOWN),
-	KEY(0, 3, KEY_KPENTER),
-	KEY(0, 4, KEY_NUMERIC_5),
-	KEY(0, 5, KEY_CAMERA),
-
-	KEY(1, 0, KEY_NUMERIC_8),
-	KEY(1, 1, KEY_DOWN),
-	KEY(1, 2, KEY_RESERVED),
-	KEY(1, 3, KEY_F1), /* Left SoftKey */
-	KEY(1, 4, KEY_NUMERIC_STAR),
-	KEY(1, 5, KEY_RESERVED),
-
-	KEY(2, 0, KEY_NUMERIC_7),
-	KEY(2, 1, KEY_NUMERIC_9),
-	KEY(2, 2, KEY_RECORD),
-	KEY(2, 3, KEY_F2), /* Right SoftKey */
-	KEY(2, 4, KEY_BACK),
-	KEY(2, 5, KEY_SELECT),
-
-	KEY(3, 0, KEY_NUMERIC_2),
-	KEY(3, 1, KEY_UP),
-	KEY(3, 2, KEY_SEND),
-	KEY(3, 3, KEY_NUMERIC_0),
-	KEY(3, 4, KEY_NUMERIC_1),
-	KEY(3, 5, KEY_RECORD),
-
-	KEY(4, 0, KEY_NUMERIC_4),
-	KEY(4, 1, KEY_LEFT),
-	KEY(4, 2, KEY_PAGEUP),
-	KEY(4, 3, KEY_NUMERIC_POUND),
-	KEY(4, 4, KEY_NUMERIC_3),
-	KEY(4, 5, KEY_RESERVED),
-};
-
-static struct matrix_keymap_data a910_matrix_keymap_data = {
-	.keymap			= a910_key_map,
-	.keymap_size		= ARRAY_SIZE(a910_key_map),
-};
-
-static struct pxa27x_keypad_platform_data a910_keypad_platform_data = {
-	.matrix_key_rows = 5,
-	.matrix_key_cols = 6,
-	.matrix_keymap_data = &a910_matrix_keymap_data,
-
-	.debounce_interval = 30,
-};
-#endif /* CONFIG_MACH_EZX_A910 */
-
-#ifdef CONFIG_MACH_EZX_E2
-static const unsigned int e2_key_map[] = {
-	KEY(0, 0, KEY_NUMERIC_6),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_NUMERIC_9),
-	KEY(0, 3, KEY_NEXTSONG),
-	KEY(0, 4, KEY_NUMERIC_5),
-	KEY(0, 5, KEY_F1), /* Left SoftKey */
-
-	KEY(1, 0, KEY_NUMERIC_8),
-	KEY(1, 1, KEY_DOWN),
-	KEY(1, 2, KEY_RESERVED),
-	KEY(1, 3, KEY_PAGEUP),
-	KEY(1, 4, KEY_NUMERIC_STAR),
-	KEY(1, 5, KEY_F2), /* Right SoftKey */
-
-	KEY(2, 0, KEY_NUMERIC_7),
-	KEY(2, 1, KEY_KPENTER),
-	KEY(2, 2, KEY_RECORD),
-	KEY(2, 3, KEY_PAGEDOWN),
-	KEY(2, 4, KEY_BACK),
-	KEY(2, 5, KEY_NUMERIC_0),
-
-	KEY(3, 0, KEY_NUMERIC_2),
-	KEY(3, 1, KEY_UP),
-	KEY(3, 2, KEY_SEND),
-	KEY(3, 3, KEY_PLAYPAUSE),
-	KEY(3, 4, KEY_NUMERIC_1),
-	KEY(3, 5, KEY_SOUND), /* Music SoftKey */
-
-	KEY(4, 0, KEY_NUMERIC_4),
-	KEY(4, 1, KEY_LEFT),
-	KEY(4, 2, KEY_NUMERIC_POUND),
-	KEY(4, 3, KEY_PREVIOUSSONG),
-	KEY(4, 4, KEY_NUMERIC_3),
-	KEY(4, 5, KEY_RESERVED),
-};
-
-static struct matrix_keymap_data e2_matrix_keymap_data = {
-	.keymap			= e2_key_map,
-	.keymap_size		= ARRAY_SIZE(e2_key_map),
-};
-
-static struct pxa27x_keypad_platform_data e2_keypad_platform_data = {
-	.matrix_key_rows = 5,
-	.matrix_key_cols = 6,
-	.matrix_keymap_data = &e2_matrix_keymap_data,
-
-	.debounce_interval = 30,
-};
-#endif /* CONFIG_MACH_EZX_E2 */
-
-#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_A910)
-/* camera */
-static struct regulator_consumer_supply camera_regulator_supplies[] = {
-	REGULATOR_SUPPLY("vdd", "0-005d"),
-};
-
-static struct regulator_init_data camera_regulator_initdata = {
-	.consumer_supplies = camera_regulator_supplies,
-	.num_consumer_supplies = ARRAY_SIZE(camera_regulator_supplies),
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct fixed_voltage_config camera_regulator_config = {
-	.supply_name		= "camera_vdd",
-	.microvolts		= 2800000,
-	.init_data		= &camera_regulator_initdata,
-};
-
-static struct platform_device camera_supply_regulator_device = {
-	.name	= "reg-fixed-voltage",
-	.id	= 1,
-	.dev	= {
-		.platform_data = &camera_regulator_config,
-	},
-};
-
-static struct gpiod_lookup_table camera_supply_gpiod_table = {
-	.dev_id = "reg-fixed-voltage.1",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO50_nCAM_EN,
-			    NULL, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-#endif
-
-#ifdef CONFIG_MACH_EZX_A780
-/* gpio_keys */
-static struct gpio_keys_button a780_buttons[] = {
-	[0] = {
-		.code       = SW_LID,
-		.gpio       = GPIO12_A780_FLIP_LID,
-		.active_low = 0,
-		.desc       = "A780 flip lid",
-		.type       = EV_SW,
-		.wakeup     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data a780_gpio_keys_platform_data = {
-	.buttons  = a780_buttons,
-	.nbuttons = ARRAY_SIZE(a780_buttons),
-};
-
-static struct platform_device a780_gpio_keys = {
-	.name = "gpio-keys",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &a780_gpio_keys_platform_data,
-	},
-};
-
-/* camera */
-static int a780_camera_reset(struct device *dev)
-{
-	gpio_set_value(GPIO19_GEN1_CAM_RST, 0);
-	msleep(10);
-	gpio_set_value(GPIO19_GEN1_CAM_RST, 1);
-
-	return 0;
-}
-
-static int a780_camera_init(void)
-{
-	int err;
-
-	/*
-	 * GPIO50_nCAM_EN is active low
-	 * GPIO19_GEN1_CAM_RST is active on rising edge
-	 */
-	err = gpio_request(GPIO19_GEN1_CAM_RST, "CAM_RST");
-	if (err) {
-		pr_err("%s: Failed to request CAM_RST\n", __func__);
-		return err;
-	}
-
-	gpio_direction_output(GPIO19_GEN1_CAM_RST, 0);
-	a780_camera_reset(NULL);
-
-	return 0;
-}
-
-struct pxacamera_platform_data a780_pxacamera_platform_data = {
-	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
-		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN |
-		PXA_CAMERA_PCP,
-	.mclk_10khz = 5000,
-	.sensor_i2c_adapter_id = 0,
-	.sensor_i2c_address = 0x5d,
-};
-
-static struct i2c_board_info a780_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("mt9m111", 0x5d),
-	},
-};
-
-static struct platform_device *a780_devices[] __initdata = {
-	&a780_gpio_keys,
-	&camera_supply_regulator_device,
-};
-
-static void __init a780_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(a780_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(a780_i2c_board_info));
-
-	pxa_set_fb_info(NULL, &ezx_fb_info_1);
-
-	pxa_set_keypad_info(&a780_keypad_platform_data);
-
-	if (a780_camera_init() == 0)
-		pxa_set_camera_info(&a780_pxacamera_platform_data);
-
-	gpiod_add_lookup_table(&camera_supply_gpiod_table);
-	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
-	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
-	platform_add_devices(ARRAY_AND_SIZE(a780_devices));
-	regulator_has_full_constraints();
-}
-
-MACHINE_START(EZX_A780, "Motorola EZX A780")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= EZX_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine   = a780_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EZX_E680
-/* gpio_keys */
-static struct gpio_keys_button e680_buttons[] = {
-	[0] = {
-		.code       = KEY_SCREENLOCK,
-		.gpio       = GPIO12_E680_LOCK_SWITCH,
-		.active_low = 0,
-		.desc       = "E680 lock switch",
-		.type       = EV_KEY,
-		.wakeup     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data e680_gpio_keys_platform_data = {
-	.buttons  = e680_buttons,
-	.nbuttons = ARRAY_SIZE(e680_buttons),
-};
-
-static struct platform_device e680_gpio_keys = {
-	.name = "gpio-keys",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &e680_gpio_keys_platform_data,
-	},
-};
-
-static struct i2c_board_info __initdata e680_i2c_board_info[] = {
-	{ I2C_BOARD_INFO("tea5767", 0x81) },
-};
-
-static struct platform_device *e680_devices[] __initdata = {
-	&e680_gpio_keys,
-};
-
-static void __init e680_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e680_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info));
-
-	pxa_set_fb_info(NULL, &ezx_fb_info_1);
-
-	pxa_set_keypad_info(&e680_keypad_platform_data);
-
-	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
-	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
-	platform_add_devices(ARRAY_AND_SIZE(e680_devices));
-}
-
-MACHINE_START(EZX_E680, "Motorola EZX E680")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= EZX_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine   = e680_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EZX_A1200
-/* gpio_keys */
-static struct gpio_keys_button a1200_buttons[] = {
-	[0] = {
-		.code       = SW_LID,
-		.gpio       = GPIO15_A1200_FLIP_LID,
-		.active_low = 0,
-		.desc       = "A1200 flip lid",
-		.type       = EV_SW,
-		.wakeup     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data a1200_gpio_keys_platform_data = {
-	.buttons  = a1200_buttons,
-	.nbuttons = ARRAY_SIZE(a1200_buttons),
-};
-
-static struct platform_device a1200_gpio_keys = {
-	.name = "gpio-keys",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &a1200_gpio_keys_platform_data,
-	},
-};
-
-static struct i2c_board_info __initdata a1200_i2c_board_info[] = {
-	{ I2C_BOARD_INFO("tea5767", 0x81) },
-};
-
-static struct platform_device *a1200_devices[] __initdata = {
-	&a1200_gpio_keys,
-};
-
-static void __init a1200_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(a1200_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info));
-
-	pxa_set_fb_info(NULL, &ezx_fb_info_2);
-
-	pxa_set_keypad_info(&a1200_keypad_platform_data);
-
-	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
-	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
-	platform_add_devices(ARRAY_AND_SIZE(a1200_devices));
-}
-
-MACHINE_START(EZX_A1200, "Motorola EZX A1200")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= EZX_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine   = a1200_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EZX_A910
-/* gpio_keys */
-static struct gpio_keys_button a910_buttons[] = {
-	[0] = {
-		.code       = SW_LID,
-		.gpio       = GPIO15_A910_FLIP_LID,
-		.active_low = 0,
-		.desc       = "A910 flip lid",
-		.type       = EV_SW,
-		.wakeup     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data a910_gpio_keys_platform_data = {
-	.buttons  = a910_buttons,
-	.nbuttons = ARRAY_SIZE(a910_buttons),
-};
-
-static struct platform_device a910_gpio_keys = {
-	.name = "gpio-keys",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &a910_gpio_keys_platform_data,
-	},
-};
-
-/* camera */
-static int a910_camera_reset(struct device *dev)
-{
-	gpio_set_value(GPIO28_GEN2_CAM_RST, 0);
-	msleep(10);
-	gpio_set_value(GPIO28_GEN2_CAM_RST, 1);
-
-	return 0;
-}
-
-static int a910_camera_init(void)
-{
-	int err;
-
-	/*
-	 * GPIO50_nCAM_EN is active low
-	 * GPIO28_GEN2_CAM_RST is active on rising edge
-	 */
-	err = gpio_request(GPIO28_GEN2_CAM_RST, "CAM_RST");
-	if (err) {
-		pr_err("%s: Failed to request CAM_RST\n", __func__);
-		return err;
-	}
-
-	gpio_direction_output(GPIO28_GEN2_CAM_RST, 0);
-	a910_camera_reset(NULL);
-
-	return 0;
-}
-
-struct pxacamera_platform_data a910_pxacamera_platform_data = {
-	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
-		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN |
-		PXA_CAMERA_PCP,
-	.mclk_10khz = 5000,
-	.sensor_i2c_adapter_id = 0,
-	.sensor_i2c_address = 0x5d,
-};
-
-/* leds-lp3944 */
-static struct lp3944_platform_data a910_lp3944_leds = {
-	.leds_size = LP3944_LEDS_MAX,
-	.leds = {
-		[0] = {
-			.name = "a910:red:",
-			.status = LP3944_LED_STATUS_OFF,
-			.type = LP3944_LED_TYPE_LED,
-		},
-		[1] = {
-			.name = "a910:green:",
-			.status = LP3944_LED_STATUS_OFF,
-			.type = LP3944_LED_TYPE_LED,
-		},
-		[2] {
-			.name = "a910:blue:",
-			.status = LP3944_LED_STATUS_OFF,
-			.type = LP3944_LED_TYPE_LED,
-		},
-		/* Leds 3 and 4 are used as display power switches */
-		[3] = {
-			.name = "a910::cli_display",
-			.status = LP3944_LED_STATUS_OFF,
-			.type = LP3944_LED_TYPE_LED_INVERTED
-		},
-		[4] = {
-			.name = "a910::main_display",
-			.status = LP3944_LED_STATUS_ON,
-			.type = LP3944_LED_TYPE_LED_INVERTED
-		},
-		[5] = { .type = LP3944_LED_TYPE_NONE },
-		[6] = {
-			.name = "a910::torch",
-			.status = LP3944_LED_STATUS_OFF,
-			.type = LP3944_LED_TYPE_LED,
-		},
-		[7] = {
-			.name = "a910::flash",
-			.status = LP3944_LED_STATUS_OFF,
-			.type = LP3944_LED_TYPE_LED_INVERTED,
-		},
-	},
-};
-
-static struct i2c_board_info __initdata a910_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("lp3944", 0x60),
-		.platform_data = &a910_lp3944_leds,
-	},
-	{
-		I2C_BOARD_INFO("mt9m111", 0x5d),
-	},
-};
-
-static struct platform_device *a910_devices[] __initdata = {
-	&a910_gpio_keys,
-	&camera_supply_regulator_device,
-};
-
-static void __init a910_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(a910_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(a910_i2c_board_info));
-
-	pxa_set_fb_info(NULL, &ezx_fb_info_2);
-
-	pxa_set_keypad_info(&a910_keypad_platform_data);
-
-	if (a910_camera_init() == 0)
-		pxa_set_camera_info(&a910_pxacamera_platform_data);
-
-	gpiod_add_lookup_table(&camera_supply_gpiod_table);
-	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
-	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
-	platform_add_devices(ARRAY_AND_SIZE(a910_devices));
-	regulator_has_full_constraints();
-}
-
-MACHINE_START(EZX_A910, "Motorola EZX A910")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= EZX_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine   = a910_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EZX_E6
-/* gpio_keys */
-static struct gpio_keys_button e6_buttons[] = {
-	[0] = {
-		.code       = KEY_SCREENLOCK,
-		.gpio       = GPIO15_E6_LOCK_SWITCH,
-		.active_low = 0,
-		.desc       = "E6 lock switch",
-		.type       = EV_KEY,
-		.wakeup     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data e6_gpio_keys_platform_data = {
-	.buttons  = e6_buttons,
-	.nbuttons = ARRAY_SIZE(e6_buttons),
-};
-
-static struct platform_device e6_gpio_keys = {
-	.name = "gpio-keys",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &e6_gpio_keys_platform_data,
-	},
-};
-
-static struct i2c_board_info __initdata e6_i2c_board_info[] = {
-	{ I2C_BOARD_INFO("tea5767", 0x81) },
-};
-
-static struct platform_device *e6_devices[] __initdata = {
-	&e6_gpio_keys,
-};
-
-static void __init e6_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e6_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info));
-
-	pxa_set_fb_info(NULL, &ezx_fb_info_2);
-
-	pxa_set_keypad_info(&e6_keypad_platform_data);
-
-	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
-	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
-	platform_add_devices(ARRAY_AND_SIZE(e6_devices));
-}
-
-MACHINE_START(EZX_E6, "Motorola EZX E6")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= EZX_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine   = e6_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_EZX_E2
-static struct i2c_board_info __initdata e2_i2c_board_info[] = {
-	{ I2C_BOARD_INFO("tea5767", 0x81) },
-};
-
-static struct platform_device *e2_devices[] __initdata = {
-};
-
-static void __init e2_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(e2_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info));
-
-	pxa_set_fb_info(NULL, &ezx_fb_info_2);
-
-	pxa_set_keypad_info(&e2_keypad_platform_data);
-
-	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
-	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
-	platform_add_devices(ARRAY_AND_SIZE(e2_devices));
-}
-
-MACHINE_START(EZX_E2, "Motorola EZX E2")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.nr_irqs	= EZX_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine   = e2_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
deleted file mode 100644
index 212efe24aedb..000000000000
--- a/arch/arm/mach-pxa/h5000.c
+++ /dev/null
@@ -1,210 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Hardware definitions for HP iPAQ h5xxx Handheld Computers
- *
- * Copyright 2000-2003  Hewlett-Packard Company.
- * Copyright 2002       Jamey Hicks <jamey.hicks@hp.com>
- * Copyright 2004-2005  Phil Blundell <pb@handhelds.org>
- * Copyright 2007-2008  Anton Vorontsov <cbouatmailru@gmail.com>
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/irq.h>
-
-#include "pxa25x.h"
-#include "h5000.h"
-#include "udc.h"
-#include "smemc.h"
-
-#include "generic.h"
-
-/*
- * Flash
- */
-
-static struct mtd_partition h5000_flash0_partitions[] = {
-	{
-		.name = "bootldr",
-		.size = 0x00040000,
-		.offset = 0,
-		.mask_flags = MTD_WRITEABLE,
-	},
-	{
-		.name = "root",
-		.size = MTDPART_SIZ_FULL,
-		.offset = MTDPART_OFS_APPEND,
-	},
-};
-
-static struct mtd_partition h5000_flash1_partitions[] = {
-	{
-		.name = "second root",
-		.size = SZ_16M - 0x00040000,
-		.offset = 0,
-	},
-	{
-		.name = "asset",
-		.size = MTDPART_SIZ_FULL,
-		.offset = MTDPART_OFS_APPEND,
-		.mask_flags = MTD_WRITEABLE,
-	},
-};
-
-static struct physmap_flash_data h5000_flash0_data = {
-	.width = 4,
-	.parts = h5000_flash0_partitions,
-	.nr_parts = ARRAY_SIZE(h5000_flash0_partitions),
-};
-
-static struct physmap_flash_data h5000_flash1_data = {
-	.width = 4,
-	.parts = h5000_flash1_partitions,
-	.nr_parts = ARRAY_SIZE(h5000_flash1_partitions),
-};
-
-static struct resource h5000_flash0_resources = {
-	.start = PXA_CS0_PHYS,
-	.end = PXA_CS0_PHYS + SZ_32M - 1,
-	.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
-};
-
-static struct resource h5000_flash1_resources = {
-	.start = PXA_CS0_PHYS + SZ_32M,
-	.end = PXA_CS0_PHYS + SZ_32M + SZ_16M - 1,
-	.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
-};
-
-static struct platform_device h5000_flash[] = {
-	{
-		.name = "physmap-flash",
-		.id = 0,
-		.resource = &h5000_flash0_resources,
-		.num_resources = 1,
-		.dev = {
-			.platform_data = &h5000_flash0_data,
-		},
-	},
-	{
-		.name = "physmap-flash",
-		.id = 1,
-		.resource = &h5000_flash1_resources,
-		.num_resources = 1,
-		.dev = {
-			.platform_data = &h5000_flash1_data,
-		},
-	},
-};
-
-/*
- * USB Device Controller
- */
-
-static struct pxa2xx_udc_mach_info h5000_udc_mach_info __initdata = {
-	.gpio_pullup = H5000_GPIO_USB_PULLUP,
-};
-
-/*
- * GPIO setup
- */
-
-static unsigned long h5000_pin_config[] __initdata = {
-	/* Crystal and Clock Signals */
-	GPIO12_32KHz,
-
-	/* SDRAM and Static Memory I/O Signals */
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,
-	GPIO79_nCS_3,
-	GPIO80_nCS_4,
-
-	/* FFUART */
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-	GPIO36_FFUART_DCD,
-	GPIO37_FFUART_DSR,
-	GPIO38_FFUART_RI,
-	GPIO39_FFUART_TXD,
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* SSP1 */
-	GPIO23_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-
-	/* I2S */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO30_I2S_SDATA_OUT,
-	GPIO31_I2S_SYNC,
-	GPIO32_I2S_SYSCLK,
-};
-
-/*
- * Localbus setup:
- * CS0: Flash;
- * CS1: MediaQ chip, select 16-bit bus and vlio;
- * CS5: SAMCOP.
- */
-
-static void fix_msc(void)
-{
-	__raw_writel(0x129c24f2, MSC0);
-	__raw_writel(0x7ff424fa, MSC1);
-	__raw_writel(0x7ff47ff4, MSC2);
-
-	__raw_writel(__raw_readl(MDREFR) | 0x02080000, MDREFR);
-}
-
-/*
- * Platform devices
- */
-
-static struct platform_device *devices[] __initdata = {
-	&h5000_flash[0],
-	&h5000_flash[1],
-};
-
-static void __init h5000_init(void)
-{
-	fix_msc();
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(h5000_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	pxa_set_udc_info(&h5000_udc_mach_info);
-	platform_add_devices(ARRAY_AND_SIZE(devices));
-}
-
-MACHINE_START(H5400, "HP iPAQ H5000")
-	.atag_offset = 0x100,
-	.map_io = pxa25x_map_io,
-	.nr_irqs = PXA_NR_IRQS,
-	.init_irq = pxa25x_init_irq,
-	.handle_irq = pxa25x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine = h5000_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/h5000.h b/arch/arm/mach-pxa/h5000.h
deleted file mode 100644
index 58687e94a0c7..000000000000
--- a/arch/arm/mach-pxa/h5000.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Hardware definitions for HP iPAQ h5xxx Handheld Computers
- *
- * Copyright(20)02 Hewlett-Packard Company.
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks
- */
-
-#ifndef __ASM_ARCH_H5000_H
-#define __ASM_ARCH_H5000_H
-
-#include "mfp-pxa25x.h"
-
-/*
- * CPU GPIOs
- */
-
-#define H5000_GPIO_POWER_BUTTON   (0)
-#define H5000_GPIO_RESET_BUTTON_N (1)
-#define H5000_GPIO_OPT_INT        (2)
-#define H5000_GPIO_BACKUP_POWER   (3)
-#define H5000_GPIO_ACTION_BUTTON  (4)
-#define H5000_GPIO_COM_DCD_SOMETHING  (5) /* what is this really ? */
-/* 6 not connected */
-#define H5000_GPIO_RESET_BUTTON_AGAIN_N (7) /* connected to gpio 1 as well */
-/* 8 not connected */
-#define H5000_GPIO_RSO_N          (9)       /* reset output from max1702 which regulates 3.3 and 2.5 */
-#define H5000_GPIO_ASIC_INT_N   (10)       /* from companion asic */
-#define H5000_GPIO_BT_ENV_0     (11)       /* to LMX9814, set to 1 according to regdump */
-/*(12) not connected */
-#define H5000_GPIO_BT_ENV_1     (13)       /* to LMX9814, set to 1 according to regdump */
-#define H5000_GPIO_BT_WU        (14)       /* from LMX9814, Defined as HOST_WAKEUP in the LMX9820 data sheet */
-/*(15) is CS1# */
-/*(16) not connected */
-/*(17) not connected */
-/*(18) is pcmcia ready */
-/*(19) is dreq1 */
-/*(20) is dreq0 */
-#define H5000_GPIO_OE_RD_NWR	(21)       /* output enable on rd/nwr signal to companion asic */
-/*(22) is not connected */
-#define H5000_GPIO_OPT_SPI_CLK  (23)       /* to extension pack */
-#define H5000_GPIO_OPT_SPI_CS_N (24)       /* to extension pack */
-#define H5000_GPIO_OPT_SPI_DOUT (25)       /* to extension pack */
-#define H5000_GPIO_OPT_SPI_DIN  (26)       /* to extension pack */
-/*(27) not connected */
-#define H5000_GPIO_I2S_BITCLK   (28)       /* connected to AC97 codec */
-#define H5000_GPIO_I2S_DATAOUT  (29)       /* connected to AC97 codec */
-#define H5000_GPIO_I2S_DATAIN   (30)       /* connected to AC97 codec */
-#define H5000_GPIO_I2S_LRCLK    (31)       /* connected to AC97 codec */
-#define H5000_GPIO_I2S_SYSCLK   (32)       /* connected to AC97 codec */
-/*(33) is CS5# */
-#define H5000_GPIO_COM_RXD      (34)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_CTS      (35)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_DCD      (36)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_DSR      (37)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_RI       (38)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_TXD      (39)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_DTR      (40)       /* connected to cradle/cable connector */
-#define H5000_GPIO_COM_RTS      (41)       /* connected to cradle/cable connector */
-
-#define H5000_GPIO_BT_RXD       (42)       /* connected to BT (LMX9814) */
-#define H5000_GPIO_BT_TXD       (43)       /* connected to BT (LMX9814) */
-#define H5000_GPIO_BT_CTS       (44)       /* connected to BT (LMX9814) */
-#define H5000_GPIO_BT_RTS       (45)       /* connected to BT (LMX9814) */
-
-#define H5000_GPIO_IRDA_RXD     (46)
-#define H5000_GPIO_IRDA_TXD     (47)
-
-#define H5000_GPIO_POE_N        (48)       /* used for pcmcia */
-#define H5000_GPIO_PWE_N        (49)       /* used for pcmcia */
-#define H5000_GPIO_PIOR_N       (50)       /* used for pcmcia */
-#define H5000_GPIO_PIOW_N       (51)       /* used for pcmcia */
-#define H5000_GPIO_PCE1_N       (52)       /* used for pcmcia */
-#define H5000_GPIO_PCE2_N       (53)       /* used for pcmcia */
-#define H5000_GPIO_PSKTSEL      (54)       /* used for pcmcia */
-#define H5000_GPIO_PREG_N       (55)       /* used for pcmcia */
-#define H5000_GPIO_PWAIT_N      (56)       /* used for pcmcia */
-#define H5000_GPIO_IOIS16_N     (57)       /* used for pcmcia */
-
-#define H5000_GPIO_IRDA_SD      (58)       /* to hsdl3002 sd */
-/*(59) not connected */
-#define H5000_GPIO_POWER_SD_N   (60)       /* controls power to SD */
-#define H5000_GPIO_POWER_RS232_N	(61)       /* inverted FORCEON to rs232 transceiver */
-#define H5000_GPIO_POWER_ACCEL_N	(62)       /* controls power to accel */
-/*(63) is not connected */
-#define H5000_GPIO_OPT_NVRAM    (64)       /* controls power to expansion pack */
-#define H5000_GPIO_CHG_EN       (65)       /* to sc801 en */
-#define H5000_GPIO_USB_PULLUP   (66)       /* USB d+ pullup via 1.5K resistor */
-#define H5000_GPIO_BT_2V8_N     (67)       /* 2.8V used by bluetooth */
-#define H5000_GPIO_EXT_CHG_RATE (68)       /* enables external charging rate */
-/*(69) is not connected */
-#define H5000_GPIO_CIR_RESET    (70)       /* consumer IR reset */
-#define H5000_GPIO_POWER_LIGHT_SENSOR_N	(71)
-#define H5000_GPIO_BT_M_RESET   (72)
-#define H5000_GPIO_STD_CHG_RATE (73)
-#define H5000_GPIO_SD_WP_N      (74)
-#define H5000_GPIO_MOTOR_ON_N   (75)       /* external pullup on this */
-#define H5000_GPIO_HEADPHONE_DETECT	(76)
-#define H5000_GPIO_USB_CHG_RATE (77)       /* select rate for charging via usb */
-/*(78) is CS2# */
-/*(79) is CS3# */
-/*(80) is CS4# */
-
-#endif /* __ASM_ARCH_H5000_H */
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
deleted file mode 100644
index 469ffeec6da5..000000000000
--- a/arch/arm/mach-pxa/himalaya.c
+++ /dev/null
@@ -1,166 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/himalaya.c
- *
- * Hardware definitions for the HTC Himalaya
- *
- * Based on 2.6.21-hh20's himalaya.c and himalaya_lcd.c
- *
- * Copyright (c) 2008 Zbynek Michl <Zbynek.Michl@seznam.cz>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/fb.h>
-#include <linux/platform_device.h>
-
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "pxa25x.h"
-
-#include "generic.h"
-
-/* ---------------------- Himalaya LCD definitions -------------------- */
-
-static struct w100_gen_regs himalaya_lcd_regs = {
-	.lcd_format =        0x00000003,
-	.lcdd_cntl1 =        0x00000000,
-	.lcdd_cntl2 =        0x0003ffff,
-	.genlcd_cntl1 =      0x00fff003,
-	.genlcd_cntl2 =      0x00000003,
-	.genlcd_cntl3 =      0x000102aa,
-};
-
-static struct w100_mode himalaya4_lcd_mode = {
-	.xres 		= 240,
-	.yres 		= 320,
-	.left_margin 	= 0,
-	.right_margin 	= 31,
-	.upper_margin 	= 15,
-	.lower_margin 	= 0,
-	.crtc_ss	= 0x80150014,
-	.crtc_ls	= 0xa0fb00f7,
-	.crtc_gs	= 0xc0080007,
-	.crtc_vpos_gs	= 0x00080007,
-	.crtc_rev	= 0x0000000a,
-	.crtc_dclk	= 0x81700030,
-	.crtc_gclk	= 0x8015010f,
-	.crtc_goe	= 0x00000000,
-	.pll_freq 	= 80,
-	.pixclk_divider = 15,
-	.pixclk_divider_rotated = 15,
-	.pixclk_src     = CLK_SRC_PLL,
-	.sysclk_divider = 0,
-	.sysclk_src     = CLK_SRC_PLL,
-};
-
-static struct w100_mode himalaya6_lcd_mode = {
-	.xres 		= 240,
-	.yres 		= 320,
-	.left_margin 	= 9,
-	.right_margin 	= 8,
-	.upper_margin 	= 5,
-	.lower_margin 	= 4,
-	.crtc_ss	= 0x80150014,
-	.crtc_ls	= 0xa0fb00f7,
-	.crtc_gs	= 0xc0080007,
-	.crtc_vpos_gs	= 0x00080007,
-	.crtc_rev	= 0x0000000a,
-	.crtc_dclk	= 0xa1700030,
-	.crtc_gclk	= 0x8015010f,
-	.crtc_goe	= 0x00000000,
-	.pll_freq 	= 95,
-	.pixclk_divider = 0xb,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_PLL,
-	.sysclk_divider = 1,
-	.sysclk_src     = CLK_SRC_PLL,
-};
-
-static struct w100_gpio_regs himalaya_w100_gpio_info = {
-	.init_data1 = 0xffff0000,	/* GPIO_DATA  */
-	.gpio_dir1  = 0x00000000,	/* GPIO_CNTL1 */
-	.gpio_oe1   = 0x003c0000,	/* GPIO_CNTL2 */
-	.init_data2 = 0x00000000,	/* GPIO_DATA2 */
-	.gpio_dir2  = 0x00000000,	/* GPIO_CNTL3 */
-	.gpio_oe2   = 0x00000000,	/* GPIO_CNTL4 */
-};
-
-static struct w100fb_mach_info himalaya_fb_info = {
-	.num_modes  = 1,
-	.regs       = &himalaya_lcd_regs,
-	.gpio       = &himalaya_w100_gpio_info,
-	.xtal_freq = 16000000,
-};
-
-static struct resource himalaya_fb_resources[] = {
-	[0] = {
-		.start	= 0x08000000,
-		.end	= 0x08ffffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device himalaya_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &himalaya_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(himalaya_fb_resources),
-	.resource       = himalaya_fb_resources,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
-	&himalaya_fb_device,
-};
-
-static void __init himalaya_lcd_init(void)
-{
-	int himalaya_boardid;
-
-	himalaya_boardid = 0x4; /* hardcoded (detection needs ASIC3 functions) */
-	printk(KERN_INFO "himalaya LCD Driver init. boardid=%d\n",
-		himalaya_boardid);
-
-	switch (himalaya_boardid) {
-	case 0x4:
-		himalaya_fb_info.modelist = &himalaya4_lcd_mode;
-	break;
-	case 0x6:
-		himalaya_fb_info.modelist = &himalaya6_lcd_mode;
-	break;
-	default:
-		printk(KERN_INFO "himalaya lcd_init: unknown boardid=%d. Using 0x4\n",
-			himalaya_boardid);
-		himalaya_fb_info.modelist = &himalaya4_lcd_mode;
-	}
-}
-
-static void __init himalaya_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	himalaya_lcd_init();
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-
-MACHINE_START(HIMALAYA, "HTC Himalaya")
-	.atag_offset = 0x100,
-	.map_io = pxa25x_map_io,
-	.nr_irqs = PXA_NR_IRQS,
-	.init_irq = pxa25x_init_irq,
-	.handle_irq = pxa25x_handle_irq,
-	.init_machine = himalaya_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/hx4700-pcmcia.c b/arch/arm/mach-pxa/hx4700-pcmcia.c
deleted file mode 100644
index e2331dfe427d..000000000000
--- a/arch/arm/mach-pxa/hx4700-pcmcia.c
+++ /dev/null
@@ -1,118 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Copyright (C) 2012 Paul Parsons <lost.distance@yahoo.com>
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-
-#include <asm/mach-types.h>
-#include "hx4700.h"
-
-#include <pcmcia/soc_common.h>
-
-static struct gpio gpios[] = {
-	{ GPIO114_HX4700_CF_RESET,    GPIOF_OUT_INIT_LOW,   "CF reset"        },
-	{ EGPIO4_CF_3V3_ON,           GPIOF_OUT_INIT_LOW,   "CF 3.3V enable"  },
-};
-
-static int hx4700_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	int ret;
-
-	ret = gpio_request_array(gpios, ARRAY_SIZE(gpios));
-	if (ret)
-		goto out;
-
-	/*
-	 * IRQ type must be set before soc_pcmcia_hw_init() calls request_irq().
-	 * The asic3 default IRQ type is level trigger low level detect, exactly
-	 * the the signal present on GPIOD4_CF_nCD when a CF card is inserted.
-	 * If the IRQ type is not changed, the asic3 interrupt handler will loop
-	 * repeatedly because it is unable to clear the level trigger interrupt.
-	 */
-	irq_set_irq_type(gpio_to_irq(GPIOD4_CF_nCD), IRQ_TYPE_EDGE_BOTH);
-
-	skt->stat[SOC_STAT_CD].gpio = GPIOD4_CF_nCD;
-	skt->stat[SOC_STAT_CD].name = "PCMCIA CD";
-	skt->stat[SOC_STAT_RDY].gpio = GPIO60_HX4700_CF_RNB;
-	skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready";
-
-out:
-	return ret;
-}
-
-static void hx4700_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
-	gpio_free_array(gpios, ARRAY_SIZE(gpios));
-}
-
-static void hx4700_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-	struct pcmcia_state *state)
-{
-	state->vs_3v = 1;
-	state->vs_Xv = 0;
-}
-
-static int hx4700_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-	const socket_state_t *state)
-{
-	switch (state->Vcc) {
-	case 0:
-		gpio_set_value(EGPIO4_CF_3V3_ON, 0);
-		break;
-	case 33:
-		gpio_set_value(EGPIO4_CF_3V3_ON, 1);
-		break;
-	default:
-		printk(KERN_ERR "pcmcia: Unsupported Vcc: %d\n", state->Vcc);
-		return -EINVAL;
-	}
-
-	gpio_set_value(GPIO114_HX4700_CF_RESET, (state->flags & SS_RESET) != 0);
-
-	return 0;
-}
-
-static struct pcmcia_low_level hx4700_pcmcia_ops = {
-	.owner          = THIS_MODULE,
-	.nr             = 1,
-	.hw_init        = hx4700_pcmcia_hw_init,
-	.hw_shutdown    = hx4700_pcmcia_hw_shutdown,
-	.socket_state   = hx4700_pcmcia_socket_state,
-	.configure_socket = hx4700_pcmcia_configure_socket,
-};
-
-static struct platform_device *hx4700_pcmcia_device;
-
-static int __init hx4700_pcmcia_init(void)
-{
-	struct platform_device *pdev;
-
-	if (!machine_is_h4700())
-		return -ENODEV;
-
-	pdev = platform_device_register_data(NULL, "pxa2xx-pcmcia", -1,
-		&hx4700_pcmcia_ops, sizeof(hx4700_pcmcia_ops));
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	hx4700_pcmcia_device = pdev;
-
-	return 0;
-}
-
-static void __exit hx4700_pcmcia_exit(void)
-{
-	platform_device_unregister(hx4700_pcmcia_device);
-}
-
-module_init(hx4700_pcmcia_init);
-module_exit(hx4700_pcmcia_exit);
-
-MODULE_AUTHOR("Paul Parsons <lost.distance@yahoo.com>");
-MODULE_DESCRIPTION("HP iPAQ hx4700 PCMCIA driver");
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
deleted file mode 100644
index 2fd665944103..000000000000
--- a/arch/arm/mach-pxa/hx4700.c
+++ /dev/null
@@ -1,942 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Support for HP iPAQ hx4700 PDAs.
- *
- * Copyright (c) 2008-2009 Philipp Zabel
- *
- * Based on code:
- *    Copyright (c) 2004 Hewlett-Packard Company.
- *    Copyright (c) 2005 SDG Systems, LLC
- *    Copyright (c) 2006 Anton Vorontsov <cbou@mail.ru>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/input/navpoint.h>
-#include <linux/lcd.h>
-#include <linux/mfd/asic3.h>
-#include <linux/mtd/physmap.h>
-#include <linux/pda_power.h>
-#include <linux/platform_data/gpio-htc-egpio.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/regulator/driver.h>
-#include <linux/regulator/gpio-regulator.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/max1586.h>
-#include <linux/spi/ads7846.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "pxa27x.h"
-#include "addr-map.h"
-#include "hx4700.h"
-#include <linux/platform_data/irda-pxaficp.h>
-
-#include <sound/ak4641.h>
-#include <video/platform_lcd.h>
-#include <video/w100fb.h>
-
-#include "devices.h"
-#include "generic.h"
-#include "udc.h"
-
-/* Physical address space information */
-
-#define ATI_W3220_PHYS  PXA_CS2_PHYS /* ATI Imageon 3220 Graphics */
-#define ASIC3_PHYS      PXA_CS3_PHYS
-#define ASIC3_SD_PHYS   (PXA_CS3_PHYS + 0x02000000)
-
-static unsigned long hx4700_pin_config[] __initdata = {
-
-	/* SDRAM and Static Memory I/O Signals */
-	GPIO20_nSDCS_2,
-	GPIO21_nSDCS_3,
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,   /* W3220 */
-	GPIO79_nCS_3,   /* ASIC3 */
-	GPIO80_nCS_4,
-	GPIO33_nCS_5,	/* EGPIO, WLAN */
-
-	/* PC CARD */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO85_nPCE_1,
-	GPIO104_PSKTSEL,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* FFUART (RS-232) */
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-	GPIO36_FFUART_DCD,
-	GPIO37_FFUART_DSR,
-	GPIO38_FFUART_RI,
-	GPIO39_FFUART_TXD,
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD_LPM_LOW,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS_LPM_LOW,
-
-	/* STUART (IRDA) */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* PWM 1 (Backlight) */
-	GPIO17_PWM1_OUT,
-
-	/* I2S */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO30_I2S_SDATA_OUT,
-	GPIO31_I2S_SYNC,
-	GPIO113_I2S_SYSCLK,
-
-	/* SSP 1 (NavPoint) */
-	GPIO23_SSP1_SCLK_IN,
-	GPIO24_SSP1_SFRM,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-
-	/* SSP 2 (TSC2046) */
-	GPIO19_SSP2_SCLK,
-	GPIO86_SSP2_RXD,
-	GPIO87_SSP2_TXD,
-	GPIO88_GPIO | MFP_LPM_DRIVE_HIGH,	/* TSC2046_CS */
-
-	/* BQ24022 Regulator */
-	GPIO72_GPIO | MFP_LPM_KEEP_OUTPUT,	/* BQ24022_nCHARGE_EN */
-	GPIO96_GPIO | MFP_LPM_KEEP_OUTPUT,	/* BQ24022_ISET2 */
-
-	/* HX4700 specific input GPIOs */
-	GPIO12_GPIO | WAKEUP_ON_EDGE_RISE,	/* ASIC3_IRQ */
-	GPIO13_GPIO,	/* W3220_IRQ */
-	GPIO14_GPIO,	/* nWLAN_IRQ */
-
-	/* HX4700 specific output GPIOs */
-	GPIO61_GPIO | MFP_LPM_DRIVE_HIGH,	/* W3220_nRESET */
-	GPIO71_GPIO | MFP_LPM_DRIVE_HIGH,	/* ASIC3_nRESET */
-	GPIO81_GPIO | MFP_LPM_DRIVE_HIGH,	/* CPU_GP_nRESET */
-	GPIO116_GPIO | MFP_LPM_DRIVE_HIGH,	/* CPU_HW_nRESET */
-	GPIO102_GPIO | MFP_LPM_DRIVE_LOW,	/* SYNAPTICS_POWER_ON */
-
-	GPIO10_GPIO,	/* GSM_IRQ */
-	GPIO13_GPIO,	/* CPLD_IRQ */
-	GPIO107_GPIO,	/* DS1WM_IRQ */
-	GPIO108_GPIO,	/* GSM_READY */
-	GPIO58_GPIO,	/* TSC2046_nPENIRQ */
-	GPIO66_GPIO,	/* nSDIO_IRQ */
-};
-
-/*
- * IRDA
- */
-
-static struct pxaficp_platform_data ficp_info = {
-	.gpio_pwdown		= GPIO105_HX4700_nIR_ON,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-/*
- * GPIO Keys
- */
-
-#define INIT_KEY(_code, _gpio, _active_low, _desc)	\
-	{						\
-		.code       = KEY_##_code,		\
-		.gpio       = _gpio,			\
-		.active_low = _active_low,		\
-		.desc       = _desc,			\
-		.type       = EV_KEY,			\
-		.wakeup     = 1,			\
-	}
-
-static struct gpio_keys_button gpio_keys_buttons[] = {
-	INIT_KEY(POWER,       GPIO0_HX4700_nKEY_POWER,   1, "Power button"),
-	INIT_KEY(MAIL,        GPIO94_HX4700_KEY_MAIL,    0, "Mail button"),
-	INIT_KEY(ADDRESSBOOK, GPIO99_HX4700_KEY_CONTACTS,0, "Contacts button"),
-	INIT_KEY(RECORD,      GPIOD6_nKEY_RECORD,        1, "Record button"),
-	INIT_KEY(CALENDAR,    GPIOD1_nKEY_CALENDAR,      1, "Calendar button"),
-	INIT_KEY(HOMEPAGE,    GPIOD3_nKEY_HOME,          1, "Home button"),
-};
-
-static struct gpio_keys_platform_data gpio_keys_data = {
-	.buttons = gpio_keys_buttons,
-	.nbuttons = ARRAY_SIZE(gpio_keys_buttons),
-};
-
-static struct platform_device gpio_keys = {
-	.name = "gpio-keys",
-	.dev  = {
-		.platform_data = &gpio_keys_data,
-	},
-	.id   = -1,
-};
-
-/*
- * Synaptics NavPoint connected to SSP1
- */
-
-static struct navpoint_platform_data navpoint_platform_data = {
-	.port	= 1,
-	.gpio	= GPIO102_HX4700_SYNAPTICS_POWER_ON,
-};
-
-static struct platform_device navpoint = {
-	.name	= "navpoint",
-	.id	= -1,
-	.dev = {
-		.platform_data = &navpoint_platform_data,
-	},
-};
-
-/*
- * ASIC3
- */
-
-static u16 asic3_gpio_config[] = {
-	/* ASIC3 GPIO banks A and B along with some of C and D
-	   implement the buffering for the CF slot. */
-	ASIC3_CONFIG_GPIO(0, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(1, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(2, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(3, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(4, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(5, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(6, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(7, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(8, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(9, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(10, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(11, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(12, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(13, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(14, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(15, 1, 1, 0),
-
-	ASIC3_CONFIG_GPIO(16, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(17, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(18, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(19, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(20, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(21, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(22, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(23, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(24, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(25, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(26, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(27, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(28, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(29, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(30, 1, 1, 0),
-	ASIC3_CONFIG_GPIO(31, 1, 1, 0),
-
-	/* GPIOC - CF, LEDs, SD */
-	ASIC3_GPIOC0_LED0,		/* red */
-	ASIC3_GPIOC1_LED1,		/* green */
-	ASIC3_GPIOC2_LED2,		/* blue */
-	ASIC3_GPIOC5_nCIOW,
-	ASIC3_GPIOC6_nCIOR,
-	ASIC3_GPIOC7_nPCE_1,
-	ASIC3_GPIOC8_nPCE_2,
-	ASIC3_GPIOC9_nPOE,
-	ASIC3_GPIOC10_nPWE,
-	ASIC3_GPIOC11_PSKTSEL,
-	ASIC3_GPIOC12_nPREG,
-	ASIC3_GPIOC13_nPWAIT,
-	ASIC3_GPIOC14_nPIOIS16,
-	ASIC3_GPIOC15_nPIOR,
-
-	/* GPIOD: input GPIOs, CF */
-	ASIC3_GPIOD4_CF_nCD,
-	ASIC3_GPIOD11_nCIOIS16,
-	ASIC3_GPIOD12_nCWAIT,
-	ASIC3_GPIOD15_nPIOW,
-};
-
-static struct asic3_led asic3_leds[ASIC3_NUM_LEDS] = {
-	[0] = {
-		.name = "hx4700:amber",
-		.default_trigger = "ds2760-battery.0-charging-blink-full-solid",
-	},
-	[1] = {
-		.name = "hx4700:green",
-		.default_trigger = "unused",
-	},
-	[2] = {
-		.name = "hx4700:blue",
-		.default_trigger = "hx4700-radio",
-	},
-};
-
-static struct resource asic3_resources[] = {
-	/* GPIO part */
-	[0] = DEFINE_RES_MEM(ASIC3_PHYS, ASIC3_MAP_SIZE_16BIT),
-	[1] = DEFINE_RES_IRQ(PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ)),
-	/* SD part */
-	[2] = DEFINE_RES_MEM(ASIC3_SD_PHYS, ASIC3_MAP_SIZE_16BIT),
-	[3] = DEFINE_RES_IRQ(PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ)),
-};
-
-static struct asic3_platform_data asic3_platform_data = {
-	.gpio_config     = asic3_gpio_config,
-	.gpio_config_num = ARRAY_SIZE(asic3_gpio_config),
-	.irq_base        = IRQ_BOARD_START,
-	.gpio_base       = HX4700_ASIC3_GPIO_BASE,
-	.clock_rate      = 4000000,
-	.leds            = asic3_leds,
-};
-
-static struct platform_device asic3 = {
-	.name          = "asic3",
-	.id            = -1,
-	.resource      = asic3_resources,
-	.num_resources = ARRAY_SIZE(asic3_resources),
-	.dev = {
-		.platform_data = &asic3_platform_data,
-	},
-};
-
-/*
- * EGPIO
- */
-
-static struct resource egpio_resources[] = {
-	[0] = DEFINE_RES_MEM(PXA_CS5_PHYS, 0x4),
-};
-
-static struct htc_egpio_chip egpio_chips[] = {
-	[0] = {
-		.reg_start = 0,
-		.gpio_base = HX4700_EGPIO_BASE,
-		.num_gpios = 8,
-		.direction = HTC_EGPIO_OUTPUT,
-	},
-};
-
-static struct htc_egpio_platform_data egpio_info = {
-	.reg_width = 16,
-	.bus_width = 16,
-	.chip      = egpio_chips,
-	.num_chips = ARRAY_SIZE(egpio_chips),
-};
-
-static struct platform_device egpio = {
-	.name          = "htc-egpio",
-	.id            = -1,
-	.resource      = egpio_resources,
-	.num_resources = ARRAY_SIZE(egpio_resources),
-	.dev = {
-		.platform_data = &egpio_info,
-	},
-};
-
-/*
- * LCD - Sony display connected to ATI Imageon w3220
- */
-
-static void sony_lcd_init(void)
-{
-	gpio_set_value(GPIO84_HX4700_LCD_SQN, 1);
-	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
-	gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 0);
-	gpio_set_value(GPIO70_HX4700_LCD_SLIN1, 0);
-	gpio_set_value(GPIO62_HX4700_LCD_nRESET, 0);
-	mdelay(10);
-	gpio_set_value(GPIO59_HX4700_LCD_PC1, 0);
-	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
-	mdelay(20);
-
-	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 1);
-	mdelay(5);
-	gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 1);
-
-	/* FIXME: init w3220 registers here */
-
-	mdelay(5);
-	gpio_set_value(GPIO70_HX4700_LCD_SLIN1, 1);
-	mdelay(10);
-	gpio_set_value(GPIO62_HX4700_LCD_nRESET, 1);
-	mdelay(10);
-	gpio_set_value(GPIO59_HX4700_LCD_PC1, 1);
-	mdelay(10);
-	gpio_set_value(GPIO112_HX4700_LCD_N2V7_7V3_ON, 1);
-}
-
-static void sony_lcd_off(void)
-{
-	gpio_set_value(GPIO59_HX4700_LCD_PC1, 0);
-	gpio_set_value(GPIO62_HX4700_LCD_nRESET, 0);
-	mdelay(10);
-	gpio_set_value(GPIO112_HX4700_LCD_N2V7_7V3_ON, 0);
-	mdelay(10);
-	gpio_set_value(GPIO111_HX4700_LCD_AVDD_3V3_ON, 0);
-	mdelay(10);
-	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
-}
-
-#ifdef CONFIG_PM
-static void w3220_lcd_suspend(struct w100fb_par *wfb)
-{
-	sony_lcd_off();
-}
-
-static void w3220_lcd_resume(struct w100fb_par *wfb)
-{
-	sony_lcd_init();
-}
-#else
-#define w3220_lcd_resume	NULL
-#define w3220_lcd_suspend	NULL
-#endif
-
-static struct w100_tg_info w3220_tg_info = {
-	.suspend	= w3220_lcd_suspend,
-	.resume		= w3220_lcd_resume,
-};
-
-/*  				 W3220_VGA		QVGA */
-static struct w100_gen_regs w3220_regs = {
-	.lcd_format =        0x00000003,
-	.lcdd_cntl1 =        0x00000000,
-	.lcdd_cntl2 =        0x0003ffff,
-	.genlcd_cntl1 =      0x00abf003,	/* 0x00fff003 */
-	.genlcd_cntl2 =      0x00000003,
-	.genlcd_cntl3 =      0x000102aa,
-};
-
-static struct w100_mode w3220_modes[] = {
-{
-	.xres 		= 480,
-	.yres 		= 640,
-	.left_margin 	= 15,
-	.right_margin 	= 16,
-	.upper_margin 	= 8,
-	.lower_margin 	= 7,
-	.crtc_ss	= 0x00000000,
-	.crtc_ls	= 0xa1ff01f9,	/* 0x21ff01f9 */
-	.crtc_gs	= 0xc0000000,	/* 0x40000000 */
-	.crtc_vpos_gs	= 0x0000028f,
-	.crtc_ps1_active = 0x00000000,	/* 0x41060010 */
-	.crtc_rev	= 0,
-	.crtc_dclk	= 0x80000000,
-	.crtc_gclk	= 0x040a0104,
-	.crtc_goe	= 0,
-	.pll_freq 	= 95,
-	.pixclk_divider = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_PLL,
-	.sysclk_divider = 0,
-	.sysclk_src     = CLK_SRC_PLL,
-},
-{
-	.xres 		= 240,
-	.yres 		= 320,
-	.left_margin 	= 9,
-	.right_margin 	= 8,
-	.upper_margin 	= 5,
-	.lower_margin 	= 4,
-	.crtc_ss	= 0x80150014,
-	.crtc_ls        = 0xa0fb00f7,
-	.crtc_gs	= 0xc0080007,
-	.crtc_vpos_gs	= 0x00080007,
-	.crtc_rev	= 0x0000000a,
-	.crtc_dclk	= 0x81700030,
-	.crtc_gclk	= 0x8015010f,
-	.crtc_goe	= 0x00000000,
-	.pll_freq 	= 95,
-	.pixclk_divider = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_PLL,
-	.sysclk_divider = 0,
-	.sysclk_src     = CLK_SRC_PLL,
-},
-};
-
-struct w100_mem_info w3220_mem_info = {
-	.ext_cntl        = 0x09640011,
-	.sdram_mode_reg  = 0x00600021,
-	.ext_timing_cntl = 0x1a001545,	/* 0x15001545 */
-	.io_cntl         = 0x7ddd7333,
-	.size            = 0x1fffff,
-};
-
-struct w100_bm_mem_info w3220_bm_mem_info = {
-	.ext_mem_bw = 0x50413e01,
-	.offset = 0,
-	.ext_timing_ctl = 0x00043f7f,
-	.ext_cntl = 0x00000010,
-	.mode_reg = 0x00250000,
-	.io_cntl = 0x0fff0000,
-	.config = 0x08301480,
-};
-
-static struct w100_gpio_regs w3220_gpio_info = {
-	.init_data1 = 0xdfe00100,	/* GPIO_DATA */
-	.gpio_dir1  = 0xffff0000,	/* GPIO_CNTL1 */
-	.gpio_oe1   = 0x00000000,	/* GPIO_CNTL2 */
-	.init_data2 = 0x00000000,	/* GPIO_DATA2 */
-	.gpio_dir2  = 0x00000000,	/* GPIO_CNTL3 */
-	.gpio_oe2   = 0x00000000,	/* GPIO_CNTL4 */
-};
-
-static struct w100fb_mach_info w3220_info = {
-	.tg        = &w3220_tg_info,
-	.mem       = &w3220_mem_info,
-	.bm_mem    = &w3220_bm_mem_info,
-	.gpio      = &w3220_gpio_info,
-	.regs      = &w3220_regs,
-	.modelist  = w3220_modes,
-	.num_modes = 2,
-	.xtal_freq = 16000000,
-};
-
-static struct resource w3220_resources[] = {
-	[0] = DEFINE_RES_MEM(ATI_W3220_PHYS, SZ_16M),
-};
-
-static struct platform_device w3220 = {
-	.name	= "w100fb",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &w3220_info,
-	},
-	.num_resources = ARRAY_SIZE(w3220_resources),
-	.resource      = w3220_resources,
-};
-
-static void hx4700_lcd_set_power(struct plat_lcd_data *pd, unsigned int power)
-{
-	if (power)
-		sony_lcd_init();
-	else
-		sony_lcd_off();
-}
-
-static struct plat_lcd_data hx4700_lcd_data = {
-	.set_power = hx4700_lcd_set_power,
-};
-
-static struct platform_device hx4700_lcd = {
-	.name = "platform-lcd",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &hx4700_lcd_data,
-		.parent        = &w3220.dev,
-	},
-};
-
-/*
- * Backlight
- */
-
-static struct platform_pwm_backlight_data backlight_data = {
-	.max_brightness = 200,
-	.dft_brightness = 100,
-};
-
-static struct platform_device backlight = {
-	.name = "pwm-backlight",
-	.id   = -1,
-	.dev  = {
-		.parent        = &pxa27x_device_pwm1.dev,
-		.platform_data = &backlight_data,
-	},
-};
-
-static struct pwm_lookup hx4700_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight", NULL,
-		   30923, PWM_POLARITY_NORMAL),
-};
-
-/*
- * USB "Transceiver"
- */
-
-static struct gpiod_lookup_table gpio_vbus_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		/* This GPIO is on ASIC3 */
-		GPIO_LOOKUP("asic3",
-			    /* Convert to a local offset on the ASIC3 */
-			    GPIOD14_nUSBC_DETECT - HX4700_ASIC3_GPIO_BASE,
-			    "vbus", GPIO_ACTIVE_LOW),
-		/* This one is on the primary SOC GPIO */
-		GPIO_LOOKUP("gpio-pxa", GPIO76_HX4700_USBC_PUEN,
-			    "pullup", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device gpio_vbus = {
-	.name          = "gpio-vbus",
-	.id            = -1,
-};
-
-static struct pxa2xx_udc_mach_info hx4700_udc_info;
-
-/*
- * Touchscreen - TSC2046 connected to SSP2
- */
-
-static const struct ads7846_platform_data tsc2046_info = {
-	.model            = 7846,
-	.vref_delay_usecs = 100,
-	.pressure_max     = 1024,
-	.debounce_max     = 10,
-	.debounce_tol     = 3,
-	.debounce_rep     = 1,
-	.gpio_pendown     = GPIO58_HX4700_TSC2046_nPENIRQ,
-};
-
-static struct pxa2xx_spi_chip tsc2046_chip = {
-	.tx_threshold = 1,
-	.rx_threshold = 2,
-	.timeout      = 64,
-};
-
-static struct spi_board_info tsc2046_board_info[] __initdata = {
-	{
-		.modalias        = "ads7846",
-		.bus_num         = 2,
-		.max_speed_hz    = 2600000, /* 100 kHz sample rate */
-		.irq             = PXA_GPIO_TO_IRQ(GPIO58_HX4700_TSC2046_nPENIRQ),
-		.platform_data   = &tsc2046_info,
-		.controller_data = &tsc2046_chip,
-	},
-};
-
-static struct pxa2xx_spi_controller pxa_ssp2_master_info = {
-	.num_chipselect = 1,
-	.enable_dma     = 1,
-};
-
-static struct gpiod_lookup_table pxa_ssp2_gpio_table = {
-	.dev_id = "spi2",
-	.table = {
-		GPIO_LOOKUP_IDX("gpio-pxa", GPIO88_HX4700_TSC2046_CS, "cs", 0, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-/*
- * External power
- */
-
-static int power_supply_init(struct device *dev)
-{
-	return gpio_request(GPIOD9_nAC_IN, "AC charger detect");
-}
-
-static int hx4700_is_ac_online(void)
-{
-	return !gpio_get_value(GPIOD9_nAC_IN);
-}
-
-static void power_supply_exit(struct device *dev)
-{
-	gpio_free(GPIOD9_nAC_IN);
-}
-
-static char *hx4700_supplicants[] = {
-	"ds2760-battery.0", "backup-battery"
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init            = power_supply_init,
-	.is_ac_online    = hx4700_is_ac_online,
-	.exit            = power_supply_exit,
-	.supplied_to     = hx4700_supplicants,
-	.num_supplicants = ARRAY_SIZE(hx4700_supplicants),
-};
-
-static struct resource power_supply_resources[] = {
-	[0] = DEFINE_RES_NAMED(PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN), 1, "ac",
-		IORESOURCE_IRQ |
-		IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE),
-	[1] = DEFINE_RES_NAMED(PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT), 1, "usb",
-		IORESOURCE_IRQ |
-		IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE),
-};
-
-static struct platform_device power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &power_supply_info,
-	},
-	.resource      = power_supply_resources,
-	.num_resources = ARRAY_SIZE(power_supply_resources),
-};
-
-/*
- * Battery charger
- */
-
-static struct regulator_consumer_supply bq24022_consumers[] = {
-	REGULATOR_SUPPLY("vbus_draw", NULL),
-	REGULATOR_SUPPLY("ac_draw", NULL),
-};
-
-static struct regulator_init_data bq24022_init_data = {
-	.constraints = {
-		.max_uA         = 500000,
-		.valid_ops_mask = REGULATOR_CHANGE_CURRENT|REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(bq24022_consumers),
-	.consumer_supplies      = bq24022_consumers,
-};
-
-static enum gpiod_flags bq24022_gpiod_gflags[] = { GPIOD_OUT_LOW };
-
-static struct gpio_regulator_state bq24022_states[] = {
-	{ .value = 100000, .gpios = (0 << 0) },
-	{ .value = 500000, .gpios = (1 << 0) },
-};
-
-static struct gpio_regulator_config bq24022_info = {
-	.supply_name = "bq24022",
-
-	.enabled_at_boot = 0,
-
-	.gflags = bq24022_gpiod_gflags,
-	.ngpios = ARRAY_SIZE(bq24022_gpiod_gflags),
-
-	.states = bq24022_states,
-	.nr_states = ARRAY_SIZE(bq24022_states),
-
-	.type = REGULATOR_CURRENT,
-	.init_data = &bq24022_init_data,
-};
-
-static struct platform_device bq24022 = {
-	.name = "gpio-regulator",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &bq24022_info,
-	},
-};
-
-static struct gpiod_lookup_table bq24022_gpiod_table = {
-	.dev_id = "gpio-regulator",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO96_HX4700_BQ24022_ISET2,
-			    NULL, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO72_HX4700_BQ24022_nCHARGE_EN,
-			    "enable", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-/*
- * StrataFlash
- */
-
-static void hx4700_set_vpp(struct platform_device *pdev, int vpp)
-{
-	gpio_set_value(GPIO91_HX4700_FLASH_VPEN, vpp);
-}
-
-static struct resource strataflash_resource[] = {
-	[0] = DEFINE_RES_MEM(PXA_CS0_PHYS, SZ_64M),
-	[1] = DEFINE_RES_MEM(PXA_CS0_PHYS + SZ_64M, SZ_64M),
-};
-
-static struct physmap_flash_data strataflash_data = {
-	.width = 4,
-	.set_vpp = hx4700_set_vpp,
-};
-
-static struct platform_device strataflash = {
-	.name          = "physmap-flash",
-	.id            = -1,
-	.resource      = strataflash_resource,
-	.num_resources = ARRAY_SIZE(strataflash_resource),
-	.dev = {
-		.platform_data = &strataflash_data,
-	},
-};
-
-/*
- * Maxim MAX1587A on PI2C
- */
-
-static struct regulator_consumer_supply max1587a_consumer =
-	REGULATOR_SUPPLY("vcc_core", NULL);
-
-static struct regulator_init_data max1587a_v3_info = {
-	.constraints = {
-		.name = "vcc_core range",
-		.min_uV =  900000,
-		.max_uV = 1705000,
-		.always_on = 1,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies = 1,
-	.consumer_supplies     = &max1587a_consumer,
-};
-
-static struct max1586_subdev_data max1587a_subdev = {
-	.name = "vcc_core",
-	.id   = MAX1586_V3,
-	.platform_data = &max1587a_v3_info,
-};
-
-static struct max1586_platform_data max1587a_info = {
-	.num_subdevs = 1,
-	.subdevs     = &max1587a_subdev,
-	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
-};
-
-static struct i2c_board_info __initdata pi2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("max1586", 0x14),
-		.platform_data = &max1587a_info,
-	},
-};
-
-/*
- * Asahi Kasei AK4641 on I2C
- */
-
-static struct ak4641_platform_data ak4641_info = {
-	.gpio_power = GPIO27_HX4700_CODEC_ON,
-	.gpio_npdn  = GPIO109_HX4700_CODEC_nPDN,
-};
-
-static struct i2c_board_info i2c_board_info[] __initdata = {
-	{
-		I2C_BOARD_INFO("ak4641", 0x12),
-		.platform_data = &ak4641_info,
-	},
-};
-
-static struct gpiod_lookup_table hx4700_audio_gpio_table = {
-	.dev_id = "hx4700-audio",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO75_HX4700_EARPHONE_nDET,
-			    "earphone-det", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO92_HX4700_HP_DRIVER,
-			    "hp-driver", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO107_HX4700_SPK_nSD,
-			    "spk-sd", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct platform_device audio = {
-	.name	= "hx4700-audio",
-	.id	= -1,
-};
-
-
-/*
- * Platform devices
- */
-
-static struct platform_device *devices[] __initdata = {
-	&asic3,
-	&gpio_keys,
-	&navpoint,
-	&backlight,
-	&w3220,
-	&hx4700_lcd,
-	&egpio,
-	&bq24022,
-	&gpio_vbus,
-	&power_supply,
-	&strataflash,
-	&audio,
-};
-
-static struct gpio global_gpios[] = {
-	{ GPIO12_HX4700_ASIC3_IRQ, GPIOF_IN, "ASIC3_IRQ" },
-	{ GPIO13_HX4700_W3220_IRQ, GPIOF_IN, "W3220_IRQ" },
-	{ GPIO14_HX4700_nWLAN_IRQ, GPIOF_IN, "WLAN_IRQ" },
-	{ GPIO59_HX4700_LCD_PC1,          GPIOF_OUT_INIT_HIGH, "LCD_PC1" },
-	{ GPIO62_HX4700_LCD_nRESET,       GPIOF_OUT_INIT_HIGH, "LCD_RESET" },
-	{ GPIO70_HX4700_LCD_SLIN1,        GPIOF_OUT_INIT_HIGH, "LCD_SLIN1" },
-	{ GPIO84_HX4700_LCD_SQN,          GPIOF_OUT_INIT_HIGH, "LCD_SQN" },
-	{ GPIO110_HX4700_LCD_LVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_LVDD" },
-	{ GPIO111_HX4700_LCD_AVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_AVDD" },
-	{ GPIO32_HX4700_RS232_ON,         GPIOF_OUT_INIT_HIGH, "RS232_ON" },
-	{ GPIO61_HX4700_W3220_nRESET,     GPIOF_OUT_INIT_HIGH, "W3220_nRESET" },
-	{ GPIO71_HX4700_ASIC3_nRESET,     GPIOF_OUT_INIT_HIGH, "ASIC3_nRESET" },
-	{ GPIO81_HX4700_CPU_GP_nRESET,    GPIOF_OUT_INIT_HIGH, "CPU_GP_nRESET" },
-	{ GPIO82_HX4700_EUART_RESET,      GPIOF_OUT_INIT_HIGH, "EUART_RESET" },
-	{ GPIO116_HX4700_CPU_HW_nRESET,   GPIOF_OUT_INIT_HIGH, "CPU_HW_nRESET" },
-};
-
-static void __init hx4700_init(void)
-{
-	int ret;
-
-	PCFR = PCFR_GPR_EN | PCFR_OPDE;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
-	gpio_set_wake(GPIO12_HX4700_ASIC3_IRQ, 1);
-	ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
-	if (ret)
-		pr_err ("hx4700: Failed to request GPIOs.\n");
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	gpiod_add_lookup_table(&bq24022_gpiod_table);
-	gpiod_add_lookup_table(&gpio_vbus_gpiod_table);
-	gpiod_add_lookup_table(&hx4700_audio_gpio_table);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup));
-
-	pxa_set_ficp_info(&ficp_info);
-	pxa27x_set_i2c_power_info(NULL);
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(i2c_board_info));
-	i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info));
-	gpiod_add_lookup_table(&pxa_ssp2_gpio_table);
-	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
-	spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));
-
-	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 0);
-	mdelay(10);
-	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1);
-	mdelay(10);
-
-	pxa_set_udc_info(&hx4700_udc_info);
-	regulator_has_full_constraints();
-}
-
-MACHINE_START(H4700, "HP iPAQ HX4700")
-	.atag_offset  = 0x100,
-	.map_io       = pxa27x_map_io,
-	.nr_irqs      = HX4700_NR_IRQS,
-	.init_irq     = pxa27x_init_irq,
-	.handle_irq     = pxa27x_handle_irq,
-	.init_machine = hx4700_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/hx4700.h b/arch/arm/mach-pxa/hx4700.h
deleted file mode 100644
index 0c30e6d9c660..000000000000
--- a/arch/arm/mach-pxa/hx4700.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * GPIO and IRQ definitions for HP iPAQ hx4700
- *
- * Copyright (c) 2008 Philipp Zabel
- */
-
-#ifndef _HX4700_H_
-#define _HX4700_H_
-
-#include <linux/gpio.h>
-#include <linux/mfd/asic3.h>
-#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
-
-#define HX4700_ASIC3_GPIO_BASE	PXA_NR_BUILTIN_GPIO
-#define HX4700_EGPIO_BASE	(HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS)
-#define HX4700_NR_IRQS		(IRQ_BOARD_START + 70)
-
-/*
- * PXA GPIOs
- */
-
-#define GPIO0_HX4700_nKEY_POWER			0
-#define GPIO12_HX4700_ASIC3_IRQ			12
-#define GPIO13_HX4700_W3220_IRQ			13
-#define GPIO14_HX4700_nWLAN_IRQ			14
-#define GPIO18_HX4700_RDY			18
-#define GPIO22_HX4700_LCD_RL			22
-#define GPIO27_HX4700_CODEC_ON			27
-#define GPIO32_HX4700_RS232_ON			32
-#define GPIO52_HX4700_CPU_nBATT_FAULT		52
-#define GPIO58_HX4700_TSC2046_nPENIRQ		58
-#define GPIO59_HX4700_LCD_PC1			59
-#define GPIO60_HX4700_CF_RNB			60
-#define GPIO61_HX4700_W3220_nRESET		61
-#define GPIO62_HX4700_LCD_nRESET		62
-#define GPIO63_HX4700_CPU_SS_nRESET		63
-#define GPIO65_HX4700_TSC2046_PEN_PU		65
-#define GPIO66_HX4700_ASIC3_nSDIO_IRQ		66
-#define GPIO67_HX4700_EUART_PS			67
-#define GPIO70_HX4700_LCD_SLIN1			70
-#define GPIO71_HX4700_ASIC3_nRESET		71
-#define GPIO72_HX4700_BQ24022_nCHARGE_EN	72
-#define GPIO73_HX4700_LCD_UD_1			73
-#define GPIO75_HX4700_EARPHONE_nDET		75
-#define GPIO76_HX4700_USBC_PUEN			76
-#define GPIO81_HX4700_CPU_GP_nRESET		81
-#define GPIO82_HX4700_EUART_RESET		82
-#define GPIO83_HX4700_WLAN_nRESET		83
-#define GPIO84_HX4700_LCD_SQN			84
-#define GPIO85_HX4700_nPCE1			85
-#define GPIO88_HX4700_TSC2046_CS		88
-#define GPIO91_HX4700_FLASH_VPEN		91
-#define GPIO92_HX4700_HP_DRIVER			92
-#define GPIO93_HX4700_EUART_INT			93
-#define GPIO94_HX4700_KEY_MAIL			94
-#define GPIO95_HX4700_BATT_OFF			95
-#define GPIO96_HX4700_BQ24022_ISET2		96
-#define GPIO97_HX4700_nBL_DETECT		97
-#define GPIO99_HX4700_KEY_CONTACTS		99
-#define GPIO100_HX4700_AUTO_SENSE		100 /* BL auto brightness */
-#define GPIO102_HX4700_SYNAPTICS_POWER_ON	102
-#define GPIO103_HX4700_SYNAPTICS_INT		103
-#define GPIO105_HX4700_nIR_ON			105
-#define GPIO106_HX4700_CPU_BT_nRESET		106
-#define GPIO107_HX4700_SPK_nSD			107
-#define GPIO109_HX4700_CODEC_nPDN		109
-#define GPIO110_HX4700_LCD_LVDD_3V3_ON		110
-#define GPIO111_HX4700_LCD_AVDD_3V3_ON		111
-#define GPIO112_HX4700_LCD_N2V7_7V3_ON		112
-#define GPIO114_HX4700_CF_RESET			114
-#define GPIO116_HX4700_CPU_HW_nRESET		116
-
-/*
- * ASIC3 GPIOs
- */
-
-#define GPIOC_BASE		(HX4700_ASIC3_GPIO_BASE + 32)
-#define GPIOD_BASE		(HX4700_ASIC3_GPIO_BASE + 48)
-
-#define GPIOC0_LED_RED		(GPIOC_BASE + 0)
-#define GPIOC1_LED_GREEN	(GPIOC_BASE + 1)
-#define GPIOC2_LED_BLUE		(GPIOC_BASE + 2)
-#define GPIOC3_nSD_CS		(GPIOC_BASE + 3)
-#define GPIOC4_CF_nCD		(GPIOC_BASE + 4)	/* Input */
-#define GPIOC5_nCIOW		(GPIOC_BASE + 5)	/* Output, to CF */
-#define GPIOC6_nCIOR		(GPIOC_BASE + 6)	/* Output, to CF */
-#define GPIOC7_nPCE1		(GPIOC_BASE + 7)	/* Input, from CPU */
-#define GPIOC8_nPCE2		(GPIOC_BASE + 8)	/* Input, from CPU */
-#define GPIOC9_nPOE		(GPIOC_BASE + 9)	/* Input, from CPU */
-#define GPIOC10_CF_nPWE		(GPIOC_BASE + 10)	/* Input */
-#define GPIOC11_PSKTSEL		(GPIOC_BASE + 11)	/* Input, from CPU */
-#define GPIOC12_nPREG		(GPIOC_BASE + 12)	/* Input, from CPU */
-#define GPIOC13_nPWAIT		(GPIOC_BASE + 13)	/* Output, to CPU */
-#define GPIOC14_nPIOIS16	(GPIOC_BASE + 14)	/* Output, to CPU */
-#define GPIOC15_nPIOR		(GPIOC_BASE + 15)	/* Input, from CPU */
-
-#define GPIOD0_CPU_SS_INT	(GPIOD_BASE + 0)	/* Input */
-#define GPIOD1_nKEY_CALENDAR	(GPIOD_BASE + 1)
-#define GPIOD2_BLUETOOTH_WAKEUP	(GPIOD_BASE + 2)
-#define GPIOD3_nKEY_HOME	(GPIOD_BASE + 3)
-#define GPIOD4_CF_nCD		(GPIOD_BASE + 4)	/* Input, from CF */
-#define GPIOD5_nPIO		(GPIOD_BASE + 5)	/* Input */
-#define GPIOD6_nKEY_RECORD	(GPIOD_BASE + 6)
-#define GPIOD7_nSDIO_DETECT	(GPIOD_BASE + 7)
-#define GPIOD8_COM_DCD		(GPIOD_BASE + 8)	/* Input */
-#define GPIOD9_nAC_IN		(GPIOD_BASE + 9)
-#define GPIOD10_nSDIO_IRQ	(GPIOD_BASE + 10)	/* Input */
-#define GPIOD11_nCIOIS16	(GPIOD_BASE + 11)	/* Input, from CF */
-#define GPIOD12_nCWAIT		(GPIOD_BASE + 12)	/* Input, from CF */
-#define GPIOD13_CF_RNB		(GPIOD_BASE + 13)	/* Input */
-#define GPIOD14_nUSBC_DETECT	(GPIOD_BASE + 14)
-#define GPIOD15_nPIOW		(GPIOD_BASE + 15)	/* Input, from CPU */
-
-/*
- * EGPIOs
- */
-
-#define EGPIO0_VCC_3V3_EN	(HX4700_EGPIO_BASE + 0)	/* WLAN support chip */
-#define EGPIO1_WL_VREG_EN	(HX4700_EGPIO_BASE + 1)	/* WLAN power */
-#define EGPIO2_VCC_2V1_WL_EN	(HX4700_EGPIO_BASE + 2)	/* unused */
-#define EGPIO3_SS_PWR_ON	(HX4700_EGPIO_BASE + 3)	/* smart slot power */
-#define EGPIO4_CF_3V3_ON	(HX4700_EGPIO_BASE + 4)	/* CF 3.3V enable */
-#define EGPIO5_BT_3V3_ON	(HX4700_EGPIO_BASE + 5)	/* BT 3.3V enable */
-#define EGPIO6_WL1V8_EN		(HX4700_EGPIO_BASE + 6)	/* WLAN 1.8V enable */
-#define EGPIO7_VCC_3V3_WL_EN	(HX4700_EGPIO_BASE + 7)	/* WLAN 3.3V enable */
-#define EGPIO8_USB_3V3_ON	(HX4700_EGPIO_BASE + 8)	/* unused */
-
-#endif /* _HX4700_H_ */
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
deleted file mode 100644
index 624088257cfc..000000000000
--- a/arch/arm/mach-pxa/icontrol.c
+++ /dev/null
@@ -1,218 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/icontrol.c
- *
- * Support for the iControl and SafeTcam platforms from TMT Services
- * using the Embedian MXM-8x10 Computer on Module
- *
- * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
- *
- * 2010-01-21 Hennie van der Merve <hvdmerwe@tmtservies.co.za>
- */
-
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/property.h>
-#include <linux/gpio/machine.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "pxa320.h"
-#include "mxm8x10.h"
-
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/regulator/machine.h>
-
-#include "generic.h"
-
-#define ICONTROL_MCP251x_nCS1	(15)
-#define ICONTROL_MCP251x_nCS2	(16)
-#define ICONTROL_MCP251x_nCS3	(17)
-#define ICONTROL_MCP251x_nCS4	(24)
-
-#define ICONTROL_MCP251x_nIRQ1	(74)
-#define ICONTROL_MCP251x_nIRQ2	(75)
-#define ICONTROL_MCP251x_nIRQ3	(76)
-#define ICONTROL_MCP251x_nIRQ4	(77)
-
-static struct pxa2xx_spi_chip mcp251x_chip_info1 = {
-	.tx_threshold   = 8,
-	.rx_threshold   = 128,
-	.dma_burst_size = 8,
-	.timeout        = 235,
-};
-
-static struct pxa2xx_spi_chip mcp251x_chip_info2 = {
-	.tx_threshold   = 8,
-	.rx_threshold   = 128,
-	.dma_burst_size = 8,
-	.timeout        = 235,
-};
-
-static struct pxa2xx_spi_chip mcp251x_chip_info3 = {
-	.tx_threshold   = 8,
-	.rx_threshold   = 128,
-	.dma_burst_size = 8,
-	.timeout        = 235,
-};
-
-static struct pxa2xx_spi_chip mcp251x_chip_info4 = {
-	.tx_threshold   = 8,
-	.rx_threshold   = 128,
-	.dma_burst_size = 8,
-	.timeout        = 235,
-};
-
-static const struct property_entry mcp251x_properties[] = {
-	PROPERTY_ENTRY_U32("clock-frequency", 16000000),
-	{}
-};
-
-static const struct software_node mcp251x_node = {
-	.properties = mcp251x_properties,
-};
-
-static struct spi_board_info mcp251x_board_info[] = {
-	{
-		.modalias        = "mcp2515",
-		.max_speed_hz    = 6500000,
-		.bus_num         = 3,
-		.chip_select     = 0,
-		.swnode		 = &mcp251x_node,
-		.controller_data = &mcp251x_chip_info1,
-		.irq             = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ1)
-	},
-	{
-		.modalias        = "mcp2515",
-		.max_speed_hz    = 6500000,
-		.bus_num         = 3,
-		.chip_select     = 1,
-		.swnode		 = &mcp251x_node,
-		.controller_data = &mcp251x_chip_info2,
-		.irq             = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ2)
-	},
-	{
-		.modalias        = "mcp2515",
-		.max_speed_hz    = 6500000,
-		.bus_num         = 4,
-		.chip_select     = 0,
-		.swnode		 = &mcp251x_node,
-		.controller_data = &mcp251x_chip_info3,
-		.irq             = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ3)
-	},
-	{
-		.modalias        = "mcp2515",
-		.max_speed_hz    = 6500000,
-		.bus_num         = 4,
-		.chip_select     = 1,
-		.swnode		 = &mcp251x_node,
-		.controller_data = &mcp251x_chip_info4,
-		.irq             = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ4)
-	}
-};
-
-static struct pxa2xx_spi_controller pxa_ssp3_spi_master_info = {
-	.num_chipselect = 2,
-	.enable_dma     = 1
-};
-
-static struct pxa2xx_spi_controller pxa_ssp4_spi_master_info = {
-	.num_chipselect = 2,
-	.enable_dma     = 1
-};
-
-struct platform_device pxa_spi_ssp3 = {
-	.name          = "pxa2xx-spi",
-	.id            = 3,
-	.dev           = {
-		.platform_data = &pxa_ssp3_spi_master_info,
-	}
-};
-
-struct platform_device pxa_spi_ssp4 = {
-	.name          = "pxa2xx-spi",
-	.id            = 4,
-	.dev           = {
-		.platform_data = &pxa_ssp4_spi_master_info,
-	}
-};
-
-static struct gpiod_lookup_table pxa_ssp3_gpio_table = {
-	.dev_id = "spi3",
-	.table = {
-		GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS1, "cs", 0, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS2, "cs", 1, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table pxa_ssp4_gpio_table = {
-	.dev_id = "spi4",
-	.table = {
-		GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS3, "cs", 0, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS4, "cs", 1, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct platform_device *icontrol_spi_devices[] __initdata = {
-	&pxa_spi_ssp3,
-	&pxa_spi_ssp4,
-};
-
-static mfp_cfg_t mfp_can_cfg[] __initdata = {
-	/* CAN CS lines */
-	GPIO15_GPIO,
-	GPIO16_GPIO,
-	GPIO17_GPIO,
-	GPIO24_GPIO,
-
-	/* SPI (SSP3) lines */
-	GPIO89_SSP3_SCLK,
-	GPIO91_SSP3_TXD,
-	GPIO92_SSP3_RXD,
-
-	/* SPI (SSP4) lines */
-	GPIO93_SSP4_SCLK,
-	GPIO95_SSP4_TXD,
-	GPIO96_SSP4_RXD,
-
-	/* CAN nIRQ lines */
-	GPIO74_GPIO | MFP_LPM_EDGE_RISE,
-	GPIO75_GPIO | MFP_LPM_EDGE_RISE,
-	GPIO76_GPIO | MFP_LPM_EDGE_RISE,
-	GPIO77_GPIO | MFP_LPM_EDGE_RISE
-};
-
-static void __init icontrol_can_init(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_can_cfg));
-	gpiod_add_lookup_table(&pxa_ssp3_gpio_table);
-	gpiod_add_lookup_table(&pxa_ssp4_gpio_table);
-	platform_add_devices(ARRAY_AND_SIZE(icontrol_spi_devices));
-	spi_register_board_info(ARRAY_AND_SIZE(mcp251x_board_info));
-}
-
-static void __init icontrol_init(void)
-{
-	mxm_8x10_barebones_init();
-	mxm_8x10_usb_host_init();
-	mxm_8x10_mmc_init();
-
-	icontrol_can_init();
-
-	regulator_has_full_constraints();
-}
-
-MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
-	.atag_offset	= 0x100,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= icontrol_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
deleted file mode 100644
index 525d01ddfbbb..000000000000
--- a/arch/arm/mach-pxa/idp.c
+++ /dev/null
@@ -1,285 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/idp.c
- *
- *  Copyright (c) 2001 Cliff Brake, Accelent Systems Inc.
- *
- *  2001-09-13: Cliff Brake <cbrake@accelent.com>
- *              Initial code
- *
- *  2005-02-15: Cliff Brake <cliff.brake@gmail.com>
- *  		<http://www.vibren.com> <http://bec-systems.com>
- *              Updated for 2.6 kernel
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "pxa25x.h"
-#include "idp.h"
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/smc91x.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/* TODO:
- * - add pxa2xx_audio_ops_t device structure
- * - Ethernet interrupt
- */
-
-static unsigned long idp_pin_config[] __initdata = {
-	/* LCD */
-	GPIOxx_LCD_DSTN_16BPP,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* STUART */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-
-	/* Ethernet */
-	GPIO33_nCS_5,	/* Ethernet CS */
-	GPIO4_GPIO,	/* Ethernet IRQ */
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= (IDP_ETH_PHYS + 0x300),
-		.end	= (IDP_ETH_PHYS + 0xfffff),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(4),
-		.end	= PXA_GPIO_TO_IRQ(4),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct smc91x_platdata smc91x_platdata = {
-	.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
-		 SMC91X_USE_DMA | SMC91X_NOWAIT,
-	.pxa_u16_align4 = true,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev.platform_data = &smc91x_platdata,
-};
-
-static void idp_backlight_power(int on)
-{
-	if (on) {
-		IDP_CPLD_LCD |= (1<<1);
-	} else {
-		IDP_CPLD_LCD &= ~(1<<1);
-	}
-}
-
-static void idp_vlcd(int on)
-{
-	if (on) {
-		IDP_CPLD_LCD |= (1<<2);
-	} else {
-		IDP_CPLD_LCD &= ~(1<<2);
-	}
-}
-
-static void idp_lcd_power(int on, struct fb_var_screeninfo *var)
-{
-	if (on) {
-		IDP_CPLD_LCD |= (1<<0);
-	} else {
-		IDP_CPLD_LCD &= ~(1<<0);
-	}
-
-	/* call idp_vlcd for now as core driver does not support
-	 * both power and vlcd hooks.  Note, this is not technically
-	 * the correct sequence, but seems to work.  Disclaimer:
-	 * this may eventually damage the display.
-	 */
-
-	idp_vlcd(on);
-}
-
-static struct pxafb_mode_info sharp_lm8v31_mode = {
-	.pixclock	= 270000,
-	.xres		= 640,
-	.yres		= 480,
-	.bpp		= 16,
-	.hsync_len	= 1,
-	.left_margin	= 3,
-	.right_margin	= 3,
-	.vsync_len	= 1,
-	.upper_margin	= 0,
-	.lower_margin	= 0,
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	.cmap_greyscale	= 0,
-};
-
-static struct pxafb_mach_info sharp_lm8v31 = {
-	.modes          = &sharp_lm8v31_mode,
-	.num_modes      = 1,
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-	.lcd_conn	= LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
-			  LCD_AC_BIAS_FREQ(255),
-	.pxafb_backlight_power = &idp_backlight_power,
-	.pxafb_lcd_power = &idp_lcd_power
-};
-
-static struct pxamci_platform_data idp_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-};
-
-static void __init idp_init(void)
-{
-	printk("idp_init()\n");
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(idp_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	platform_device_register(&smc91x_device);
-	//platform_device_register(&mst_audio_device);
-	pxa_set_fb_info(NULL, &sharp_lm8v31);
-	pxa_set_mci_info(&idp_mci_platform_data);
-}
-
-static struct map_desc idp_io_desc[] __initdata = {
-  	{
-		.virtual	=  IDP_COREVOLT_VIRT,
-		.pfn		= __phys_to_pfn(IDP_COREVOLT_PHYS),
-		.length		= IDP_COREVOLT_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	=  IDP_CPLD_VIRT,
-		.pfn		= __phys_to_pfn(IDP_CPLD_PHYS),
-		.length		= IDP_CPLD_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init idp_map_io(void)
-{
-	pxa25x_map_io();
-	iotable_init(idp_io_desc, ARRAY_SIZE(idp_io_desc));
-}
-
-/* LEDs */
-#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
-struct idp_led {
-	struct led_classdev     cdev;
-	u8                      mask;
-};
-
-/*
- * The triggers lines up below will only be used if the
- * LED triggers are compiled in.
- */
-static const struct {
-	const char *name;
-	const char *trigger;
-} idp_leds[] = {
-	{ "idp:green", "heartbeat", },
-	{ "idp:red", "cpu0", },
-};
-
-static void idp_led_set(struct led_classdev *cdev,
-		enum led_brightness b)
-{
-	struct idp_led *led = container_of(cdev,
-			struct idp_led, cdev);
-	u32 reg = IDP_CPLD_LED_CONTROL;
-
-	if (b != LED_OFF)
-		reg &= ~led->mask;
-	else
-		reg |= led->mask;
-
-	IDP_CPLD_LED_CONTROL = reg;
-}
-
-static enum led_brightness idp_led_get(struct led_classdev *cdev)
-{
-	struct idp_led *led = container_of(cdev,
-			struct idp_led, cdev);
-
-	return (IDP_CPLD_LED_CONTROL & led->mask) ? LED_OFF : LED_FULL;
-}
-
-static int __init idp_leds_init(void)
-{
-	int i;
-
-	if (!machine_is_pxa_idp())
-		return -ENODEV;
-
-	for (i = 0; i < ARRAY_SIZE(idp_leds); i++) {
-		struct idp_led *led;
-
-		led = kzalloc(sizeof(*led), GFP_KERNEL);
-		if (!led)
-			break;
-
-		led->cdev.name = idp_leds[i].name;
-		led->cdev.brightness_set = idp_led_set;
-		led->cdev.brightness_get = idp_led_get;
-		led->cdev.default_trigger = idp_leds[i].trigger;
-
-		if (i == 0)
-			led->mask = IDP_HB_LED;
-		else
-			led->mask = IDP_BUSY_LED;
-
-		if (led_classdev_register(NULL, &led->cdev) < 0) {
-			kfree(led);
-			break;
-		}
-	}
-
-	return 0;
-}
-
-/*
- * Since we may have triggers on any subsystem, defer registration
- * until after subsystem_init.
- */
-fs_initcall(idp_leds_init);
-#endif
-
-MACHINE_START(PXA_IDP, "Vibren PXA255 IDP")
-	/* Maintainer: Vibren Technologies */
-	.map_io		= idp_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= idp_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/idp.h b/arch/arm/mach-pxa/idp.h
deleted file mode 100644
index 81b9bd9ba754..000000000000
--- a/arch/arm/mach-pxa/idp.h
+++ /dev/null
@@ -1,195 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  arch/arm/mach-pxa/include/mach/idp.h
- *
- * Copyright (c) 2001 Cliff Brake, Accelent Systems Inc.
- *
- * 2001-09-13: Cliff Brake <cbrake@accelent.com>
- *             Initial code
- *
- * 2005-02-15: Cliff Brake <cliff.brake@gmail.com>
- *             <http://www.vibren.com> <http://bec-systems.com>
- *             Changes for 2.6 kernel.
- */
-
-
-/*
- * Note: this file must be safe to include in assembly files
- *
- * Support for the Vibren PXA255 IDP requires rev04 or later
- * IDP hardware.
- */
-
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
-
-#define IDP_FLASH_PHYS		(PXA_CS0_PHYS)
-#define IDP_ALT_FLASH_PHYS	(PXA_CS1_PHYS)
-#define IDP_MEDIAQ_PHYS		(PXA_CS3_PHYS)
-#define IDP_IDE_PHYS		(PXA_CS5_PHYS + 0x03000000)
-#define IDP_ETH_PHYS		(PXA_CS5_PHYS + 0x03400000)
-#define IDP_COREVOLT_PHYS	(PXA_CS5_PHYS + 0x03800000)
-#define IDP_CPLD_PHYS		(PXA_CS5_PHYS + 0x03C00000)
-
-
-/*
- * virtual memory map
- */
-
-#define IDP_COREVOLT_VIRT	(0xf0000000)
-#define IDP_COREVOLT_SIZE	(1*1024*1024)
-
-#define IDP_CPLD_VIRT		(IDP_COREVOLT_VIRT + IDP_COREVOLT_SIZE)
-#define IDP_CPLD_SIZE		(1*1024*1024)
-
-#if (IDP_CPLD_VIRT + IDP_CPLD_SIZE) > 0xfc000000
-#error Your custom IO space is getting a bit large !!
-#endif
-
-#define CPLD_P2V(x)		((x) - IDP_CPLD_PHYS + IDP_CPLD_VIRT)
-#define CPLD_V2P(x)		((x) - IDP_CPLD_VIRT + IDP_CPLD_PHYS)
-
-#ifndef __ASSEMBLY__
-#  define __CPLD_REG(x)		(*((volatile unsigned long *)CPLD_P2V(x)))
-#else
-#  define __CPLD_REG(x)		CPLD_P2V(x)
-#endif
-
-/* board level registers in the CPLD: (offsets from CPLD_VIRT) */
-
-#define _IDP_CPLD_REV			(IDP_CPLD_PHYS + 0x00)
-#define _IDP_CPLD_PERIPH_PWR		(IDP_CPLD_PHYS + 0x04)
-#define _IDP_CPLD_LED_CONTROL		(IDP_CPLD_PHYS + 0x08)
-#define _IDP_CPLD_KB_COL_HIGH		(IDP_CPLD_PHYS + 0x0C)
-#define _IDP_CPLD_KB_COL_LOW		(IDP_CPLD_PHYS + 0x10)
-#define _IDP_CPLD_PCCARD_EN		(IDP_CPLD_PHYS + 0x14)
-#define _IDP_CPLD_GPIOH_DIR		(IDP_CPLD_PHYS + 0x18)
-#define _IDP_CPLD_GPIOH_VALUE		(IDP_CPLD_PHYS + 0x1C)
-#define _IDP_CPLD_GPIOL_DIR		(IDP_CPLD_PHYS + 0x20)
-#define _IDP_CPLD_GPIOL_VALUE		(IDP_CPLD_PHYS + 0x24)
-#define _IDP_CPLD_PCCARD_PWR		(IDP_CPLD_PHYS + 0x28)
-#define _IDP_CPLD_MISC_CTRL		(IDP_CPLD_PHYS + 0x2C)
-#define _IDP_CPLD_LCD			(IDP_CPLD_PHYS + 0x30)
-#define _IDP_CPLD_FLASH_WE		(IDP_CPLD_PHYS + 0x34)
-
-#define _IDP_CPLD_KB_ROW		(IDP_CPLD_PHYS + 0x50)
-#define _IDP_CPLD_PCCARD0_STATUS	(IDP_CPLD_PHYS + 0x54)
-#define _IDP_CPLD_PCCARD1_STATUS	(IDP_CPLD_PHYS + 0x58)
-#define _IDP_CPLD_MISC_STATUS		(IDP_CPLD_PHYS + 0x5C)
-
-/* FPGA register virtual addresses */
-
-#define IDP_CPLD_REV			__CPLD_REG(_IDP_CPLD_REV)
-#define IDP_CPLD_PERIPH_PWR		__CPLD_REG(_IDP_CPLD_PERIPH_PWR)
-#define IDP_CPLD_LED_CONTROL		__CPLD_REG(_IDP_CPLD_LED_CONTROL)
-#define IDP_CPLD_KB_COL_HIGH		__CPLD_REG(_IDP_CPLD_KB_COL_HIGH)
-#define IDP_CPLD_KB_COL_LOW		__CPLD_REG(_IDP_CPLD_KB_COL_LOW)
-#define IDP_CPLD_PCCARD_EN		__CPLD_REG(_IDP_CPLD_PCCARD_EN)
-#define IDP_CPLD_GPIOH_DIR		__CPLD_REG(_IDP_CPLD_GPIOH_DIR)
-#define IDP_CPLD_GPIOH_VALUE		__CPLD_REG(_IDP_CPLD_GPIOH_VALUE)
-#define IDP_CPLD_GPIOL_DIR		__CPLD_REG(_IDP_CPLD_GPIOL_DIR)
-#define IDP_CPLD_GPIOL_VALUE		__CPLD_REG(_IDP_CPLD_GPIOL_VALUE)
-#define IDP_CPLD_PCCARD_PWR		__CPLD_REG(_IDP_CPLD_PCCARD_PWR)
-#define IDP_CPLD_MISC_CTRL		__CPLD_REG(_IDP_CPLD_MISC_CTRL)
-#define IDP_CPLD_LCD			__CPLD_REG(_IDP_CPLD_LCD)
-#define IDP_CPLD_FLASH_WE		__CPLD_REG(_IDP_CPLD_FLASH_WE)
-
-#define IDP_CPLD_KB_ROW		        __CPLD_REG(_IDP_CPLD_KB_ROW)
-#define IDP_CPLD_PCCARD0_STATUS	        __CPLD_REG(_IDP_CPLD_PCCARD0_STATUS)
-#define IDP_CPLD_PCCARD1_STATUS	        __CPLD_REG(_IDP_CPLD_PCCARD1_STATUS)
-#define IDP_CPLD_MISC_STATUS		__CPLD_REG(_IDP_CPLD_MISC_STATUS)
-
-
-/*
- * Bit masks for various registers
- */
-
-// IDP_CPLD_PCCARD_PWR
-#define PCC0_PWR0	(1 << 0)
-#define PCC0_PWR1	(1 << 1)
-#define PCC0_PWR2	(1 << 2)
-#define PCC0_PWR3	(1 << 3)
-#define PCC1_PWR0	(1 << 4)
-#define PCC1_PWR1	(1 << 5)
-#define PCC1_PWR2	(1 << 6)
-#define PCC1_PWR3	(1 << 7)
-
-// IDP_CPLD_PCCARD_EN
-#define PCC0_RESET	(1 << 6)
-#define PCC1_RESET	(1 << 7)
-#define PCC0_ENABLE	(1 << 0)
-#define PCC1_ENABLE	(1 << 1)
-
-// IDP_CPLD_PCCARDx_STATUS
-#define _PCC_WRPROT	(1 << 7) // 7-4 read as low true
-#define _PCC_RESET	(1 << 6)
-#define _PCC_IRQ	(1 << 5)
-#define _PCC_INPACK	(1 << 4)
-#define PCC_BVD2	(1 << 3)
-#define PCC_BVD1	(1 << 2)
-#define PCC_VS2		(1 << 1)
-#define PCC_VS1		(1 << 0)
-
-/* A listing of interrupts used by external hardware devices */
-
-#define TOUCH_PANEL_IRQ			PXA_GPIO_TO_IRQ(5)
-#define IDE_IRQ				PXA_GPIO_TO_IRQ(21)
-
-#define TOUCH_PANEL_IRQ_EDGE		IRQ_TYPE_EDGE_FALLING
-
-#define ETHERNET_IRQ			PXA_GPIO_TO_IRQ(4)
-#define ETHERNET_IRQ_EDGE		IRQ_TYPE_EDGE_RISING
-
-#define IDE_IRQ_EDGE			IRQ_TYPE_EDGE_RISING
-
-#define PCMCIA_S0_CD_VALID		PXA_GPIO_TO_IRQ(7)
-#define PCMCIA_S0_CD_VALID_EDGE		IRQ_TYPE_EDGE_BOTH
-
-#define PCMCIA_S1_CD_VALID		PXA_GPIO_TO_IRQ(8)
-#define PCMCIA_S1_CD_VALID_EDGE		IRQ_TYPE_EDGE_BOTH
-
-#define PCMCIA_S0_RDYINT		PXA_GPIO_TO_IRQ(19)
-#define PCMCIA_S1_RDYINT		PXA_GPIO_TO_IRQ(22)
-
-
-/*
- * Macros for LED Driver
- */
-
-/* leds 0 = ON */
-#define IDP_HB_LED	(1<<5)
-#define IDP_BUSY_LED	(1<<6)
-
-#define IDP_LEDS_MASK	(IDP_HB_LED | IDP_BUSY_LED)
-
-/*
- * macros for MTD driver
- */
-
-#define FLASH_WRITE_PROTECT_DISABLE()	((IDP_CPLD_FLASH_WE) &= ~(0x1))
-#define FLASH_WRITE_PROTECT_ENABLE()	((IDP_CPLD_FLASH_WE) |= (0x1))
-
-/*
- * macros for matrix keyboard driver
- */
-
-#define KEYBD_MATRIX_NUMBER_INPUTS	7
-#define KEYBD_MATRIX_NUMBER_OUTPUTS	14
-
-#define KEYBD_MATRIX_INVERT_OUTPUT_LOGIC	FALSE
-#define KEYBD_MATRIX_INVERT_INPUT_LOGIC		FALSE
-
-#define KEYBD_MATRIX_SETTLING_TIME_US			100
-#define KEYBD_MATRIX_KEYSTATE_DEBOUNCE_CONSTANT		2
-
-#define KEYBD_MATRIX_SET_OUTPUTS(outputs) \
-{\
-	IDP_CPLD_KB_COL_LOW = outputs;\
-	IDP_CPLD_KB_COL_HIGH = outputs >> 7;\
-}
-
-#define KEYBD_MATRIX_GET_INPUTS(inputs) \
-{\
-	inputs = (IDP_CPLD_KB_ROW & 0x7f);\
-}
-
-
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
deleted file mode 100644
index 98423a96f440..000000000000
--- a/arch/arm/mach-pxa/littleton.c
+++ /dev/null
@@ -1,462 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/littleton.c
- *
- *  Support for the Marvell Littleton Development Platform.
- *
- *  Author:	Jason Chagas (largely modified code)
- *  Created:	Nov 20, 2006
- *  Copyright:	(C) Copyright 2006 Marvell International Ltd.
- *
- *  2007-11-22  modified to align with latest kernel
- *              eric miao <eric.miao@marvell.com>
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/gpio/machine.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/smc91x.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <linux/mfd/da903x.h>
-#include <linux/platform_data/max732x.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "pxa300.h"
-#include "devices.h"
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include "littleton.h"
-#include <linux/platform_data/mtd-nand-pxa3xx.h>
-
-#include "generic.h"
-
-/* Littleton MFP configurations */
-static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
-	/* LCD */
-	GPIO54_LCD_LDD_0,
-	GPIO55_LCD_LDD_1,
-	GPIO56_LCD_LDD_2,
-	GPIO57_LCD_LDD_3,
-	GPIO58_LCD_LDD_4,
-	GPIO59_LCD_LDD_5,
-	GPIO60_LCD_LDD_6,
-	GPIO61_LCD_LDD_7,
-	GPIO62_LCD_LDD_8,
-	GPIO63_LCD_LDD_9,
-	GPIO64_LCD_LDD_10,
-	GPIO65_LCD_LDD_11,
-	GPIO66_LCD_LDD_12,
-	GPIO67_LCD_LDD_13,
-	GPIO68_LCD_LDD_14,
-	GPIO69_LCD_LDD_15,
-	GPIO70_LCD_LDD_16,
-	GPIO71_LCD_LDD_17,
-	GPIO72_LCD_FCLK,
-	GPIO73_LCD_LCLK,
-	GPIO74_LCD_PCLK,
-	GPIO75_LCD_BIAS,
-
-	/* SSP2 */
-	GPIO25_SSP2_SCLK,
-	GPIO27_SSP2_TXD,
-	GPIO17_GPIO,	/* SFRM as chip-select */
-
-	/* Debug Ethernet */
-	GPIO90_GPIO,
-
-	/* Keypad */
-	GPIO107_KP_DKIN_0,
-	GPIO108_KP_DKIN_1,
-	GPIO115_KP_MKIN_0,
-	GPIO116_KP_MKIN_1,
-	GPIO117_KP_MKIN_2,
-	GPIO118_KP_MKIN_3,
-	GPIO119_KP_MKIN_4,
-	GPIO120_KP_MKIN_5,
-	GPIO121_KP_MKOUT_0,
-	GPIO122_KP_MKOUT_1,
-	GPIO123_KP_MKOUT_2,
-	GPIO124_KP_MKOUT_3,
-	GPIO125_KP_MKOUT_4,
-
-	/* MMC1 */
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-	GPIO7_MMC1_CLK,
-	GPIO8_MMC1_CMD,
-	GPIO15_GPIO, /* card detect */
-
-	/* UART3 */
-	GPIO107_UART3_CTS,
-	GPIO108_UART3_RTS,
-	GPIO109_UART3_TXD,
-	GPIO110_UART3_RXD,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= (LITTLETON_ETH_PHYS + 0x300),
-		.end	= (LITTLETON_ETH_PHYS + 0xfffff),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO90)),
-		.end	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO90)),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	}
-};
-
-static struct smc91x_platdata littleton_smc91x_info = {
-	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT |
-		  SMC91X_NOWAIT | SMC91X_USE_DMA,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &littleton_smc91x_info,
-	},
-};
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info tpo_tdo24mtea1_modes[] = {
-	[0] = {
-		/* VGA */
-		.pixclock	= 38250,
-		.xres		= 480,
-		.yres		= 640,
-		.bpp		= 16,
-		.hsync_len	= 8,
-		.left_margin	= 8,
-		.right_margin	= 24,
-		.vsync_len	= 2,
-		.upper_margin	= 2,
-		.lower_margin	= 4,
-		.sync		= 0,
-	},
-	[1] = {
-		/* QVGA */
-		.pixclock	= 153000,
-		.xres		= 240,
-		.yres		= 320,
-		.bpp		= 16,
-		.hsync_len	= 8,
-		.left_margin	= 8,
-		.right_margin	= 88,
-		.vsync_len	= 2,
-		.upper_margin	= 2,
-		.lower_margin	= 2,
-		.sync		= 0,
-	},
-};
-
-static struct pxafb_mach_info littleton_lcd_info = {
-	.modes			= tpo_tdo24mtea1_modes,
-	.num_modes		= 2,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP,
-};
-
-static void __init littleton_init_lcd(void)
-{
-	pxa_set_fb_info(NULL, &littleton_lcd_info);
-}
-#else
-static inline void littleton_init_lcd(void) {};
-#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
-
-#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static struct pxa2xx_spi_controller littleton_spi_info = {
-	.num_chipselect		= 1,
-};
-
-static struct pxa2xx_spi_chip littleton_tdo24m_chip = {
-	.rx_threshold	= 1,
-	.tx_threshold	= 1,
-};
-
-static struct spi_board_info littleton_spi_devices[] __initdata = {
-	{
-		.modalias	= "tdo24m",
-		.max_speed_hz	= 1000000,
-		.bus_num	= 2,
-		.chip_select	= 0,
-		.controller_data= &littleton_tdo24m_chip,
-	},
-};
-
-static struct gpiod_lookup_table littleton_spi_gpio_table = {
-	.dev_id = "spi2",
-	.table = {
-		GPIO_LOOKUP_IDX("gpio-pxa", LITTLETON_GPIO_LCD_CS, "cs", 0, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static void __init littleton_init_spi(void)
-{
-	gpiod_add_lookup_table(&littleton_spi_gpio_table);
-	pxa2xx_set_spi_info(2, &littleton_spi_info);
-	spi_register_board_info(ARRAY_AND_SIZE(littleton_spi_devices));
-}
-#else
-static inline void littleton_init_spi(void) {}
-#endif
-
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static const unsigned int littleton_matrix_key_map[] = {
-	/* KEY(row, col, key_code) */
-	KEY(1, 3, KEY_0), KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3),
-	KEY(0, 1, KEY_4), KEY(1, 1, KEY_5), KEY(2, 1, KEY_6), KEY(0, 2, KEY_7),
-	KEY(1, 2, KEY_8), KEY(2, 2, KEY_9),
-
-	KEY(0, 3, KEY_KPASTERISK), 	/* * */
-	KEY(2, 3, KEY_KPDOT), 		/* # */
-
-	KEY(5, 4, KEY_ENTER),
-
-	KEY(5, 0, KEY_UP),
-	KEY(5, 1, KEY_DOWN),
-	KEY(5, 2, KEY_LEFT),
-	KEY(5, 3, KEY_RIGHT),
-	KEY(3, 2, KEY_HOME),
-	KEY(4, 1, KEY_END),
-	KEY(3, 3, KEY_BACK),
-
-	KEY(4, 0, KEY_SEND),
-	KEY(4, 2, KEY_VOLUMEUP),
-	KEY(4, 3, KEY_VOLUMEDOWN),
-
-	KEY(3, 0, KEY_F22),	/* soft1 */
-	KEY(3, 1, KEY_F23),	/* soft2 */
-};
-
-static struct matrix_keymap_data littleton_matrix_keymap_data = {
-	.keymap			= littleton_matrix_key_map,
-	.keymap_size		= ARRAY_SIZE(littleton_matrix_key_map),
-};
-
-static struct pxa27x_keypad_platform_data littleton_keypad_info = {
-	.matrix_key_rows	= 6,
-	.matrix_key_cols	= 5,
-	.matrix_keymap_data	= &littleton_matrix_keymap_data,
-
-	.enable_rotary0		= 1,
-	.rotary0_up_key		= KEY_UP,
-	.rotary0_down_key	= KEY_DOWN,
-
-	.debounce_interval	= 30,
-};
-static void __init littleton_init_keypad(void)
-{
-	pxa_set_keypad_info(&littleton_keypad_info);
-}
-#else
-static inline void littleton_init_keypad(void) {}
-#endif
-
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data littleton_mci_platform_data = {
-	.detect_delay_ms	= 200,
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-};
-
-static struct gpiod_lookup_table littleton_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		/* Card detect on MFP (gpio-pxa) GPIO 15 */
-		GPIO_LOOKUP("gpio-pxa", MFP_PIN_GPIO15,
-			    "cd", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static void __init littleton_init_mmc(void)
-{
-	gpiod_add_lookup_table(&littleton_mci_gpio_table);
-	pxa_set_mci_info(&littleton_mci_platform_data);
-}
-#else
-static inline void littleton_init_mmc(void) {}
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
-static struct mtd_partition littleton_nand_partitions[] = {
-	[0] = {
-		.name        = "Bootloader",
-		.offset      = 0,
-		.size        = 0x060000,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	[1] = {
-		.name        = "Kernel",
-		.offset      = 0x060000,
-		.size        = 0x200000,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	[2] = {
-		.name        = "Filesystem",
-		.offset      = 0x0260000,
-		.size        = 0x3000000,     /* 48M - rootfs */
-	},
-	[3] = {
-		.name        = "MassStorage",
-		.offset      = 0x3260000,
-		.size        = 0x3d40000,
-	},
-	[4] = {
-		.name        = "BBT",
-		.offset      = 0x6FA0000,
-		.size        = 0x80000,
-		.mask_flags  = MTD_WRITEABLE,  /* force read-only */
-	},
-	/* NOTE: we reserve some blocks at the end of the NAND flash for
-	 * bad block management, and the max number of relocation blocks
-	 * differs on different platforms. Please take care with it when
-	 * defining the partition table.
-	 */
-};
-
-static struct pxa3xx_nand_platform_data littleton_nand_info = {
-	.parts		= littleton_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(littleton_nand_partitions),
-};
-
-static void __init littleton_init_nand(void)
-{
-	pxa3xx_set_nand_info(&littleton_nand_info);
-}
-#else
-static inline void littleton_init_nand(void) {}
-#endif /* IS_ENABLED(CONFIG_MTD_NAND_MARVELL) */
-
-#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
-static struct led_info littleton_da9034_leds[] = {
-	[0] = {
-		.name	= "littleton:keypad1",
-		.flags	= DA9034_LED_RAMP,
-	},
-	[1] = {
-		.name	= "littleton:keypad2",
-		.flags	= DA9034_LED_RAMP,
-	},
-	[2] = {
-		.name	= "littleton:vibra",
-		.flags	= 0,
-	},
-};
-
-static struct da9034_touch_pdata littleton_da9034_touch = {
-	.x_inverted     = 1,
-	.interval_ms    = 20,
-};
-
-static struct da903x_subdev_info littleton_da9034_subdevs[] = {
-	{
-		.name		= "da903x-led",
-		.id		= DA9034_ID_LED_1,
-		.platform_data	= &littleton_da9034_leds[0],
-	}, {
-		.name		= "da903x-led",
-		.id		= DA9034_ID_LED_2,
-		.platform_data	= &littleton_da9034_leds[1],
-	}, {
-		.name		= "da903x-led",
-		.id		= DA9034_ID_VIBRA,
-		.platform_data	= &littleton_da9034_leds[2],
-	}, {
-		.name		= "da903x-backlight",
-		.id		= DA9034_ID_WLED,
-	}, {
-		.name		= "da9034-touch",
-		.id		= DA9034_ID_TOUCH,
-		.platform_data	= &littleton_da9034_touch,
-	},
-};
-
-static struct da903x_platform_data littleton_da9034_info = {
-	.num_subdevs	= ARRAY_SIZE(littleton_da9034_subdevs),
-	.subdevs	= littleton_da9034_subdevs,
-};
-
-static struct max732x_platform_data littleton_max7320_info = {
-	.gpio_base	= EXT0_GPIO_BASE,
-};
-
-static struct i2c_board_info littleton_i2c_info[] = {
-	[0] = {
-		.type		= "da9034",
-		.addr		= 0x34,
-		.platform_data	= &littleton_da9034_info,
-		.irq		= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO18)),
-	},
-	[1] = {
-		.type		= "max7320",
-		.addr		= 0x50,
-		.platform_data	= &littleton_max7320_info,
-	},
-};
-
-static void __init littleton_init_i2c(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(littleton_i2c_info));
-}
-#else
-static inline void littleton_init_i2c(void) {}
-#endif /* CONFIG_I2C_PXA || CONFIG_I2C_PXA_MODULE */
-
-static void __init littleton_init(void)
-{
-	/* initialize MFP configurations */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(littleton_mfp_cfg));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	/*
-	 * Note: we depend bootloader set the correct
-	 * value to MSC register for SMC91x.
-	 */
-	platform_device_register(&smc91x_device);
-
-	littleton_init_spi();
-	littleton_init_i2c();
-	littleton_init_mmc();
-	littleton_init_lcd();
-	littleton_init_keypad();
-	littleton_init_nand();
-}
-
-MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
-	.atag_offset	= 0x100,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= LITTLETON_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= littleton_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/littleton.h b/arch/arm/mach-pxa/littleton.h
deleted file mode 100644
index a0a8d2bf9d71..000000000000
--- a/arch/arm/mach-pxa/littleton.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_ARCH_LITTLETON_H
-#define __ASM_ARCH_LITTLETON_H
-
-#define LITTLETON_ETH_PHYS	0x30000000
-
-#define LITTLETON_GPIO_LCD_CS	(17)
-
-#define EXT0_GPIO_BASE	(PXA_NR_BUILTIN_GPIO)
-#define EXT0_GPIO(x)	(EXT0_GPIO_BASE + (x))
-
-#define LITTLETON_NR_IRQS	(IRQ_BOARD_START + 8)
-
-#endif /* __ASM_ARCH_LITTLETON_H */
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
deleted file mode 100644
index 0e4123c5fd42..000000000000
--- a/arch/arm/mach-pxa/lpd270.c
+++ /dev/null
@@ -1,518 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/lpd270.c
- *
- * Support for the LogicPD PXA270 Card Engine.
- * Derived from the mainstone code, which carries these notices:
- *
- * Author:	Nicolas Pitre
- * Created:	Nov 05, 2002
- * Copyright:	MontaVista Software Inc.
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/bitops.h>
-#include <linux/fb.h>
-#include <linux/ioport.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/smc91x.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <linux/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include "pxa27x.h"
-#include "lpd270.h"
-#include "addr-map.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include "smemc.h"
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned long lpd270_pin_config[] __initdata = {
-	/* Chip Selects */
-	GPIO15_nCS_1,	/* Mainboard Flash */
-	GPIO78_nCS_2,	/* CPLD + Ethernet */
-
-	/* LCD - 16bpp Active TFT */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
-	GPIO16_PWM0_OUT,	/* Backlight */
-
-	/* USB Host */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO45_AC97_SYSCLK,
-
-	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
-};
-
-static unsigned int lpd270_irq_enabled;
-
-static void lpd270_mask_irq(struct irq_data *d)
-{
-	int lpd270_irq = d->irq - LPD270_IRQ(0);
-
-	__raw_writew(~(1 << lpd270_irq), LPD270_INT_STATUS);
-
-	lpd270_irq_enabled &= ~(1 << lpd270_irq);
-	__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
-}
-
-static void lpd270_unmask_irq(struct irq_data *d)
-{
-	int lpd270_irq = d->irq - LPD270_IRQ(0);
-
-	lpd270_irq_enabled |= 1 << lpd270_irq;
-	__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
-}
-
-static struct irq_chip lpd270_irq_chip = {
-	.name		= "CPLD",
-	.irq_ack	= lpd270_mask_irq,
-	.irq_mask	= lpd270_mask_irq,
-	.irq_unmask	= lpd270_unmask_irq,
-};
-
-static void lpd270_irq_handler(struct irq_desc *desc)
-{
-	unsigned int irq;
-	unsigned long pending;
-
-	pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled;
-	do {
-		/* clear useless edge notification */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-		if (likely(pending)) {
-			irq = LPD270_IRQ(0) + __ffs(pending);
-			generic_handle_irq(irq);
-
-			pending = __raw_readw(LPD270_INT_STATUS) &
-						lpd270_irq_enabled;
-		}
-	} while (pending);
-}
-
-static void __init lpd270_init_irq(void)
-{
-	int irq;
-
-	pxa27x_init_irq();
-
-	__raw_writew(0, LPD270_INT_MASK);
-	__raw_writew(0, LPD270_INT_STATUS);
-
-	/* setup extra LogicPD PXA270 irqs */
-	for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) {
-		irq_set_chip_and_handler(irq, &lpd270_irq_chip,
-					 handle_level_irq);
-		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
-	}
-	irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lpd270_irq_handler);
-	irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
-}
-
-
-#ifdef CONFIG_PM
-static void lpd270_irq_resume(void)
-{
-	__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
-}
-
-static struct syscore_ops lpd270_irq_syscore_ops = {
-	.resume = lpd270_irq_resume,
-};
-
-static int __init lpd270_irq_device_init(void)
-{
-	if (machine_is_logicpd_pxa270()) {
-		register_syscore_ops(&lpd270_irq_syscore_ops);
-		return 0;
-	}
-	return -ENODEV;
-}
-
-device_initcall(lpd270_irq_device_init);
-#endif
-
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= LPD270_ETH_PHYS,
-		.end	= (LPD270_ETH_PHYS + 0xfffff),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= LPD270_ETHERNET_IRQ,
-		.end	= LPD270_ETHERNET_IRQ,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-struct smc91x_platdata smc91x_platdata = {
-	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev.platform_data = &smc91x_platdata,
-};
-
-static struct resource lpd270_flash_resources[] = {
-	[0] = {
-		.start	= PXA_CS0_PHYS,
-		.end	= PXA_CS0_PHYS + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_CS1_PHYS,
-		.end	= PXA_CS1_PHYS + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct mtd_partition lpd270_flash0_partitions[] = {
-	{
-		.name =		"Bootloader",
-		.size =		0x00040000,
-		.offset =	0,
-		.mask_flags =	MTD_WRITEABLE  /* force read-only */
-	}, {
-		.name =		"Kernel",
-		.size =		0x00400000,
-		.offset =	0x00040000,
-	}, {
-		.name =		"Filesystem",
-		.size =		MTDPART_SIZ_FULL,
-		.offset =	0x00440000
-	},
-};
-
-static struct flash_platform_data lpd270_flash_data[2] = {
-	{
-		.name		= "processor-flash",
-		.map_name	= "cfi_probe",
-		.parts		= lpd270_flash0_partitions,
-		.nr_parts	= ARRAY_SIZE(lpd270_flash0_partitions),
-	}, {
-		.name		= "mainboard-flash",
-		.map_name	= "cfi_probe",
-		.parts		= NULL,
-		.nr_parts	= 0,
-	}
-};
-
-static struct platform_device lpd270_flash_device[2] = {
-	{
-		.name		= "pxa2xx-flash",
-		.id		= 0,
-		.dev = {
-			.platform_data	= &lpd270_flash_data[0],
-		},
-		.resource	= &lpd270_flash_resources[0],
-		.num_resources	= 1,
-	}, {
-		.name		= "pxa2xx-flash",
-		.id		= 1,
-		.dev = {
-			.platform_data	= &lpd270_flash_data[1],
-		},
-		.resource	= &lpd270_flash_resources[1],
-		.num_resources	= 1,
-	},
-};
-
-static struct pwm_lookup lpd270_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data lpd270_backlight_data = {
-	.max_brightness	= 1,
-	.dft_brightness	= 1,
-};
-
-static struct platform_device lpd270_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent	= &pxa27x_device_pwm0.dev,
-		.platform_data = &lpd270_backlight_data,
-	},
-};
-
-/* 5.7" TFT QVGA (LoLo display number 1) */
-static struct pxafb_mode_info sharp_lq057q3dc02_mode = {
-	.pixclock		= 150000,
-	.xres			= 320,
-	.yres			= 240,
-	.bpp			= 16,
-	.hsync_len		= 0x14,
-	.left_margin		= 0x28,
-	.right_margin		= 0x0a,
-	.vsync_len		= 0x02,
-	.upper_margin		= 0x08,
-	.lower_margin		= 0x14,
-	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info sharp_lq057q3dc02 = {
-	.modes			= &sharp_lq057q3dc02_mode,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
-				  LCD_ALTERNATE_MAPPING,
-};
-
-/* 12.1" TFT SVGA (LoLo display number 2) */
-static struct pxafb_mode_info sharp_lq121s1dg31_mode = {
-	.pixclock		= 50000,
-	.xres			= 800,
-	.yres			= 600,
-	.bpp			= 16,
-	.hsync_len		= 0x05,
-	.left_margin		= 0x52,
-	.right_margin		= 0x05,
-	.vsync_len		= 0x04,
-	.upper_margin		= 0x14,
-	.lower_margin		= 0x0a,
-	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info sharp_lq121s1dg31 = {
-	.modes			= &sharp_lq121s1dg31_mode,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
-				  LCD_ALTERNATE_MAPPING,
-};
-
-/* 3.6" TFT QVGA (LoLo display number 3) */
-static struct pxafb_mode_info sharp_lq036q1da01_mode = {
-	.pixclock		= 150000,
-	.xres			= 320,
-	.yres			= 240,
-	.bpp			= 16,
-	.hsync_len		= 0x0e,
-	.left_margin		= 0x04,
-	.right_margin		= 0x0a,
-	.vsync_len		= 0x03,
-	.upper_margin		= 0x03,
-	.lower_margin		= 0x03,
-	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info sharp_lq036q1da01 = {
-	.modes			= &sharp_lq036q1da01_mode,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
-				  LCD_ALTERNATE_MAPPING,
-};
-
-/* 6.4" TFT VGA (LoLo display number 5) */
-static struct pxafb_mode_info sharp_lq64d343_mode = {
-	.pixclock		= 25000,
-	.xres			= 640,
-	.yres			= 480,
-	.bpp			= 16,
-	.hsync_len		= 0x31,
-	.left_margin		= 0x89,
-	.right_margin		= 0x19,
-	.vsync_len		= 0x12,
-	.upper_margin		= 0x22,
-	.lower_margin		= 0x00,
-	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info sharp_lq64d343 = {
-	.modes			= &sharp_lq64d343_mode,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
-				  LCD_ALTERNATE_MAPPING,
-};
-
-/* 10.4" TFT VGA (LoLo display number 7) */
-static struct pxafb_mode_info sharp_lq10d368_mode = {
-	.pixclock		= 25000,
-	.xres			= 640,
-	.yres			= 480,
-	.bpp			= 16,
-	.hsync_len		= 0x31,
-	.left_margin		= 0x89,
-	.right_margin		= 0x19,
-	.vsync_len		= 0x12,
-	.upper_margin		= 0x22,
-	.lower_margin		= 0x00,
-	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info sharp_lq10d368 = {
-	.modes			= &sharp_lq10d368_mode,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
-				  LCD_ALTERNATE_MAPPING,
-};
-
-/* 3.5" TFT QVGA (LoLo display number 8) */
-static struct pxafb_mode_info sharp_lq035q7db02_20_mode = {
-	.pixclock		= 150000,
-	.xres			= 240,
-	.yres			= 320,
-	.bpp			= 16,
-	.hsync_len		= 0x0e,
-	.left_margin		= 0x0a,
-	.right_margin		= 0x0a,
-	.vsync_len		= 0x03,
-	.upper_margin		= 0x05,
-	.lower_margin		= 0x14,
-	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info sharp_lq035q7db02_20 = {
-	.modes			= &sharp_lq035q7db02_20_mode,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
-				  LCD_ALTERNATE_MAPPING,
-};
-
-static struct pxafb_mach_info *lpd270_lcd_to_use;
-
-static int __init lpd270_set_lcd(char *str)
-{
-	if (!strncasecmp(str, "lq057q3dc02", 11)) {
-		lpd270_lcd_to_use = &sharp_lq057q3dc02;
-	} else if (!strncasecmp(str, "lq121s1dg31", 11)) {
-		lpd270_lcd_to_use = &sharp_lq121s1dg31;
-	} else if (!strncasecmp(str, "lq036q1da01", 11)) {
-		lpd270_lcd_to_use = &sharp_lq036q1da01;
-	} else if (!strncasecmp(str, "lq64d343", 8)) {
-		lpd270_lcd_to_use = &sharp_lq64d343;
-	} else if (!strncasecmp(str, "lq10d368", 8)) {
-		lpd270_lcd_to_use = &sharp_lq10d368;
-	} else if (!strncasecmp(str, "lq035q7db02-20", 14)) {
-		lpd270_lcd_to_use = &sharp_lq035q7db02_20;
-	} else {
-		printk(KERN_INFO "lpd270: unknown lcd panel [%s]\n", str);
-	}
-
-	return 1;
-}
-
-__setup("lcd=", lpd270_set_lcd);
-
-static struct platform_device *platform_devices[] __initdata = {
-	&smc91x_device,
-	&lpd270_backlight_device,
-	&lpd270_flash_device[0],
-	&lpd270_flash_device[1],
-};
-
-static struct pxaohci_platform_data lpd270_ohci_platform_data = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-static void __init lpd270_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(lpd270_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	lpd270_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
-	lpd270_flash_data[1].width = 4;
-
-	/*
-	 * System bus arbiter setting:
-	 * - Core_Park
-	 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
-	 */
-	ARB_CNTRL = ARB_CORE_PARK | 0x234;
-
-	pwm_add_table(lpd270_pwm_lookup, ARRAY_SIZE(lpd270_pwm_lookup));
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-
-	pxa_set_ac97_info(NULL);
-
-	if (lpd270_lcd_to_use != NULL)
-		pxa_set_fb_info(NULL, lpd270_lcd_to_use);
-
-	pxa_set_ohci_info(&lpd270_ohci_platform_data);
-}
-
-
-static struct map_desc lpd270_io_desc[] __initdata = {
-	{
-		.virtual	= (unsigned long)LPD270_CPLD_VIRT,
-		.pfn		= __phys_to_pfn(LPD270_CPLD_PHYS),
-		.length		= LPD270_CPLD_SIZE,
-		.type		= MT_DEVICE,
-	},
-};
-
-static void __init lpd270_map_io(void)
-{
-	pxa27x_map_io();
-	iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
-
-	/* for use I SRAM as framebuffer.  */
-	PSLR |= 0x00000F04;
-	PCFR  = 0x00000066;
-}
-
-MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
-	/* Maintainer: Peter Barada */
-	.atag_offset	= 0x100,
-	.map_io		= lpd270_map_io,
-	.nr_irqs	= LPD270_NR_IRQS,
-	.init_irq	= lpd270_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= lpd270_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/lpd270.h b/arch/arm/mach-pxa/lpd270.h
deleted file mode 100644
index 4b096fb9d61f..000000000000
--- a/arch/arm/mach-pxa/lpd270.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-pxa/include/mach/lpd270.h
- *
- * Author:	Lennert Buytenhek
- * Created:	Feb 10, 2006
- */
-
-#ifndef __ASM_ARCH_LPD270_H
-#define __ASM_ARCH_LPD270_H
-
-#define LPD270_CPLD_PHYS	PXA_CS2_PHYS
-#define LPD270_CPLD_VIRT	IOMEM(0xf0000000)
-#define LPD270_CPLD_SIZE	0x00100000
-
-#define LPD270_ETH_PHYS		(PXA_CS2_PHYS + 0x01000000)
-
-/* CPLD registers  */
-#define LPD270_CPLD_REG(x)	(LPD270_CPLD_VIRT + (x))
-#define LPD270_CONTROL		LPD270_CPLD_REG(0x00)
-#define LPD270_PERIPHERAL0	LPD270_CPLD_REG(0x04)
-#define LPD270_PERIPHERAL1	LPD270_CPLD_REG(0x08)
-#define LPD270_CPLD_REVISION	LPD270_CPLD_REG(0x14)
-#define LPD270_EEPROM_SPI_ITF	LPD270_CPLD_REG(0x20)
-#define LPD270_MODE_PINS	LPD270_CPLD_REG(0x24)
-#define LPD270_EGPIO		LPD270_CPLD_REG(0x30)
-#define LPD270_INT_MASK		LPD270_CPLD_REG(0x40)
-#define LPD270_INT_STATUS	LPD270_CPLD_REG(0x50)
-
-#define LPD270_INT_AC97		(1 << 4)  /* AC'97 CODEC IRQ */
-#define LPD270_INT_ETHERNET	(1 << 3)  /* Ethernet controller IRQ */
-#define LPD270_INT_USBC		(1 << 2)  /* USB client cable detection IRQ */
-
-#define LPD270_IRQ(x)		(IRQ_BOARD_START + (x))
-#define LPD270_USBC_IRQ		LPD270_IRQ(2)
-#define LPD270_ETHERNET_IRQ	LPD270_IRQ(3)
-#define LPD270_AC97_IRQ		LPD270_IRQ(4)
-#define LPD270_NR_IRQS		(IRQ_BOARD_START + 5)
-
-#endif
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
deleted file mode 100644
index 4f0944f3b262..000000000000
--- a/arch/arm/mach-pxa/lubbock.c
+++ /dev/null
@@ -1,649 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/lubbock.c
- *
- *  Support for the Intel DBPXA250 Development Platform.
- *
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- */
-#include <linux/clkdev.h>
-#include <linux/gpio.h>
-#include <linux/gpio/gpio-reg.h>
-#include <linux/gpio/machine.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-#include <linux/major.h>
-#include <linux/fb.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/smc91x.h>
-#include <linux/slab.h>
-#include <linux/leds.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/spi/pxa2xx_spi.h>
-
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <linux/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include <asm/hardware/sa1111.h>
-
-#include "pxa25x.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include "lubbock.h"
-#include "udc.h"
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include "pm.h"
-#include "smemc.h"
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned long lubbock_pin_config[] __initdata = {
-	GPIO15_nCS_1,	/* CS1 - Flash */
-	GPIO78_nCS_2,	/* CS2 - Baseboard FGPA */
-	GPIO79_nCS_3,	/* CS3 - SMC ethernet */
-	GPIO80_nCS_4,	/* CS4 - SA1111 */
-
-	/* SSP data pins */
-	GPIO23_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* LCD - 16bpp DSTN */
-	GPIOxx_LCD_DSTN_16BPP,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* PC Card */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-
-	/* SA1111 chip */
-	GPIO11_3_6MHz,
-
-	/* wakeup */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-#define LUB_HEXLED		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
-
-void lubbock_set_hexled(uint32_t value)
-{
-	LUB_HEXLED = value;
-}
-
-static struct gpio_chip *lubbock_misc_wr_gc;
-
-static void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
-{
-	unsigned long m = mask, v = set;
-	lubbock_misc_wr_gc->set_multiple(lubbock_misc_wr_gc, &m, &v);
-}
-
-static int lubbock_udc_is_connected(void)
-{
-	return (LUB_MISC_RD & (1 << 9)) == 0;
-}
-
-static struct pxa2xx_udc_mach_info udc_info __initdata = {
-	.udc_is_connected	= lubbock_udc_is_connected,
-	// no D+ pullup; lubbock can't connect/disconnect in software
-};
-
-static struct resource lubbock_udc_resources[] = {
-	DEFINE_RES_MEM(0x40600000, 0x10000),
-	DEFINE_RES_IRQ(IRQ_USB),
-	DEFINE_RES_IRQ(LUBBOCK_USB_IRQ),
-	DEFINE_RES_IRQ(LUBBOCK_USB_DISC_IRQ),
-};
-
-/* GPIOs for SA1111 PCMCIA */
-static struct gpiod_lookup_table sa1111_pcmcia_gpio_table = {
-	.dev_id = "1800",
-	.table = {
-		{ "sa1111", 0, "a0vpp", GPIO_ACTIVE_HIGH },
-		{ "sa1111", 1, "a1vpp", GPIO_ACTIVE_HIGH },
-		{ "sa1111", 2, "a0vcc", GPIO_ACTIVE_HIGH },
-		{ "sa1111", 3, "a1vcc", GPIO_ACTIVE_HIGH },
-		{ "lubbock", 14, "b0vcc", GPIO_ACTIVE_HIGH },
-		{ "lubbock", 15, "b1vcc", GPIO_ACTIVE_HIGH },
-		{ },
-	},
-};
-
-static void lubbock_init_pcmcia(void)
-{
-	struct clk *clk;
-
-	gpiod_add_lookup_table(&sa1111_pcmcia_gpio_table);
-
-	/* Add an alias for the SA1111 PCMCIA clock */
-	clk = clk_get_sys("pxa2xx-pcmcia", NULL);
-	if (!IS_ERR(clk)) {
-		clkdev_create(clk, NULL, "1800");
-		clk_put(clk);
-	}
-}
-
-static struct resource sa1111_resources[] = {
-	[0] = {
-		.start	= 0x10000000,
-		.end	= 0x10001fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= LUBBOCK_SA1111_IRQ,
-		.end	= LUBBOCK_SA1111_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct sa1111_platform_data sa1111_info = {
-	.irq_base	= LUBBOCK_SA1111_IRQ_BASE,
-	.disable_devs	= SA1111_DEVID_SAC,
-};
-
-static struct platform_device sa1111_device = {
-	.name		= "sa1111",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sa1111_resources),
-	.resource	= sa1111_resources,
-	.dev		= {
-		.platform_data	= &sa1111_info,
-	},
-};
-
-/* ADS7846 is connected through SSP ... and if your board has J5 populated,
- * you can select it to replace the ucb1400 by switching the touchscreen cable
- * (to J5) and poking board registers (as done below).  Else it's only useful
- * for the temperature sensors.
- */
-static struct pxa2xx_spi_controller pxa_ssp_master_info = {
-	.num_chipselect	= 1,
-};
-
-static int lubbock_ads7846_pendown_state(void)
-{
-	/* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */
-	return 0;
-}
-
-static struct ads7846_platform_data ads_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,		/* internal, no cap */
-	.get_pendown_state	= lubbock_ads7846_pendown_state,
-	// .x_plate_ohms		= 500,	/* GUESS! */
-	// .y_plate_ohms		= 500,	/* GUESS! */
-};
-
-static struct gpiod_lookup_table ads7846_cs_gpios = {
-	.dev_id		= "ads7846",
-	.table		= {
-		GPIO_LOOKUP("lubbock", 11, "cs", GPIO_ACTIVE_LOW),
-		{}
-	},
-};
-
-static struct pxa2xx_spi_chip ads_hw = {
-	.tx_threshold		= 1,
-	.rx_threshold		= 2,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = { {
-	.modalias	= "ads7846",
-	.platform_data	= &ads_info,
-	.controller_data = &ads_hw,
-	.irq		= LUBBOCK_BB_IRQ,
-	.max_speed_hz	= 120000 /* max sample rate at 3V */
-				* 26 /* command + data + overhead */,
-	.bus_num	= 1,
-	.chip_select	= 0,
-},
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.name	= "smc91x-regs",
-		.start	= 0x0c000c00,
-		.end	= 0x0c0fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= LUBBOCK_ETH_IRQ,
-		.end	= LUBBOCK_ETH_IRQ,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-	[2] = {
-		.name	= "smc91x-attrib",
-		.start	= 0x0e000000,
-		.end	= 0x0e0fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct smc91x_platdata lubbock_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_2,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &lubbock_smc91x_info,
-	},
-};
-
-static struct resource flash_resources[] = {
-	[0] = {
-		.start	= 0x00000000,
-		.end	= SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0x04000000,
-		.end	= 0x04000000 + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct mtd_partition lubbock_partitions[] = {
-	{
-		.name =		"Bootloader",
-		.size =		0x00040000,
-		.offset =	0,
-		.mask_flags =	MTD_WRITEABLE  /* force read-only */
-	},{
-		.name =		"Kernel",
-		.size =		0x00100000,
-		.offset =	0x00040000,
-	},{
-		.name =		"Filesystem",
-		.size =		MTDPART_SIZ_FULL,
-		.offset =	0x00140000
-	}
-};
-
-static struct flash_platform_data lubbock_flash_data[2] = {
-	{
-		.map_name	= "cfi_probe",
-		.parts		= lubbock_partitions,
-		.nr_parts	= ARRAY_SIZE(lubbock_partitions),
-	}, {
-		.map_name	= "cfi_probe",
-		.parts		= NULL,
-		.nr_parts	= 0,
-	}
-};
-
-static struct platform_device lubbock_flash_device[2] = {
-	{
-		.name		= "pxa2xx-flash",
-		.id		= 0,
-		.dev = {
-			.platform_data = &lubbock_flash_data[0],
-		},
-		.resource = &flash_resources[0],
-		.num_resources = 1,
-	},
-	{
-		.name		= "pxa2xx-flash",
-		.id		= 1,
-		.dev = {
-			.platform_data = &lubbock_flash_data[1],
-		},
-		.resource = &flash_resources[1],
-		.num_resources = 1,
-	},
-};
-
-static struct resource lubbock_cplds_resources[] = {
-	[0] = {
-		.start	= LUBBOCK_FPGA_PHYS + 0xc0,
-		.end	= LUBBOCK_FPGA_PHYS + 0xe0 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(0),
-		.end	= PXA_GPIO_TO_IRQ(0),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-	[2] = {
-		.start	= LUBBOCK_IRQ(0),
-		.end	= LUBBOCK_IRQ(6),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device lubbock_cplds_device = {
-	.name		= "pxa_cplds_irqs",
-	.id		= -1,
-	.resource	= &lubbock_cplds_resources[0],
-	.num_resources	= 3,
-};
-
-
-static struct platform_device *devices[] __initdata = {
-	&sa1111_device,
-	&smc91x_device,
-	&lubbock_flash_device[0],
-	&lubbock_flash_device[1],
-	&lubbock_cplds_device,
-};
-
-static struct pxafb_mode_info sharp_lm8v31_mode = {
-	.pixclock	= 270000,
-	.xres		= 640,
-	.yres		= 480,
-	.bpp		= 16,
-	.hsync_len	= 1,
-	.left_margin	= 3,
-	.right_margin	= 3,
-	.vsync_len	= 1,
-	.upper_margin	= 0,
-	.lower_margin	= 0,
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	.cmap_greyscale	= 0,
-};
-
-static struct pxafb_mach_info sharp_lm8v31 = {
-	.modes		= &sharp_lm8v31_mode,
-	.num_modes	= 1,
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-	.lcd_conn	= LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
-			  LCD_AC_BIAS_FREQ(255),
-};
-
-#define	MMC_POLL_RATE		msecs_to_jiffies(1000)
-
-static irq_handler_t mmc_detect_int;
-static void *mmc_detect_int_data;
-static struct timer_list mmc_timer;
-
-static void lubbock_mmc_poll(struct timer_list *unused)
-{
-	unsigned long flags;
-
-	/* clear any previous irq state, then ... */
-	local_irq_save(flags);
-	LUB_IRQ_SET_CLR &= ~(1 << 0);
-	local_irq_restore(flags);
-
-	/* poll until mmc/sd card is removed */
-	if (LUB_IRQ_SET_CLR & (1 << 0))
-		mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
-	else {
-		(void) mmc_detect_int(LUBBOCK_SD_IRQ, mmc_detect_int_data);
-		enable_irq(LUBBOCK_SD_IRQ);
-	}
-}
-
-static irqreturn_t lubbock_detect_int(int irq, void *data)
-{
-	/* IRQ is level triggered; disable, and poll for removal */
-	disable_irq(irq);
-	mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
-
-	return mmc_detect_int(irq, data);
-}
-
-static int lubbock_mci_init(struct device *dev,
-		irq_handler_t detect_int,
-		void *data)
-{
-	/* detect card insert/eject */
-	mmc_detect_int = detect_int;
-	mmc_detect_int_data = data;
-	timer_setup(&mmc_timer, lubbock_mmc_poll, 0);
-	return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int,
-			   0, "lubbock-sd-detect", data);
-}
-
-static int lubbock_mci_get_ro(struct device *dev)
-{
-	return (LUB_MISC_RD & (1 << 2)) != 0;
-}
-
-static void lubbock_mci_exit(struct device *dev, void *data)
-{
-	free_irq(LUBBOCK_SD_IRQ, data);
-	del_timer_sync(&mmc_timer);
-}
-
-static struct pxamci_platform_data lubbock_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.detect_delay_ms	= 10,
-	.init 			= lubbock_mci_init,
-	.get_ro			= lubbock_mci_get_ro,
-	.exit 			= lubbock_mci_exit,
-};
-
-static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if (mode & IR_SIRMODE) {
-		lubbock_set_misc_wr(BIT(4), 0);
-	} else if (mode & IR_FIRMODE) {
-		lubbock_set_misc_wr(BIT(4), BIT(4));
-	}
-	pxa2xx_transceiver_mode(dev, mode);
-	local_irq_restore(flags);
-}
-
-static struct pxaficp_platform_data lubbock_ficp_platform_data = {
-	.gpio_pwdown		= -1,
-	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE,
-	.transceiver_mode	= lubbock_irda_transceiver_mode,
-};
-
-static void __init lubbock_init(void)
-{
-	int flashboot = (LUB_CONF_SWITCHES & 1);
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
-
-	lubbock_misc_wr_gc = gpio_reg_init(NULL, (void *)&LUB_MISC_WR,
-					   -1, 16, "lubbock", 0, LUB_MISC_WR,
-					   NULL, NULL, NULL);
-	if (IS_ERR(lubbock_misc_wr_gc)) {
-		pr_err("Lubbock: unable to register lubbock GPIOs: %ld\n",
-		       PTR_ERR(lubbock_misc_wr_gc));
-		lubbock_misc_wr_gc = NULL;
-	}
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	lubbock_init_pcmcia();
-
-	clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
-	/* lubbock has two extra IRQs */
-	pxa25x_device_udc.resource = lubbock_udc_resources;
-	pxa25x_device_udc.num_resources = ARRAY_SIZE(lubbock_udc_resources);
-	pxa_set_udc_info(&udc_info);
-	pxa_set_fb_info(NULL, &sharp_lm8v31);
-	pxa_set_mci_info(&lubbock_mci_platform_data);
-	pxa_set_ficp_info(&lubbock_ficp_platform_data);
-	pxa_set_ac97_info(NULL);
-
-	lubbock_flash_data[0].width = lubbock_flash_data[1].width =
-		(__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
-	/* Compensate for the nROMBT switch which swaps the flash banks */
-	printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
-	       flashboot?"Flash":"ROM", flashboot);
-
-	lubbock_flash_data[flashboot^1].name = "application-flash";
-	lubbock_flash_data[flashboot].name = "boot-rom";
-	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	gpiod_add_lookup_table(&ads7846_cs_gpios);
-
-	pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-}
-
-static struct map_desc lubbock_io_desc[] __initdata = {
-  	{	/* CPLD */
-		.virtual	=  LUBBOCK_FPGA_VIRT,
-		.pfn		= __phys_to_pfn(LUBBOCK_FPGA_PHYS),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init lubbock_map_io(void)
-{
-	pxa25x_map_io();
-	iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
-
-	PCFR |= PCFR_OPDE;
-}
-
-/*
- * Driver for the 8 discrete LEDs available for general use:
- * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
- * so be sure to not monkey with them here.
- */
-
-#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
-struct lubbock_led {
-	struct led_classdev	cdev;
-	u8			mask;
-};
-
-/*
- * The triggers lines up below will only be used if the
- * LED triggers are compiled in.
- */
-static const struct {
-	const char *name;
-	const char *trigger;
-} lubbock_leds[] = {
-	{ "lubbock:D28", "default-on", },
-	{ "lubbock:D27", "cpu0", },
-	{ "lubbock:D26", "heartbeat" },
-	{ "lubbock:D25", },
-	{ "lubbock:D24", },
-	{ "lubbock:D23", },
-	{ "lubbock:D22", },
-	{ "lubbock:D21", },
-};
-
-static void lubbock_led_set(struct led_classdev *cdev,
-			      enum led_brightness b)
-{
-	struct lubbock_led *led = container_of(cdev,
-					 struct lubbock_led, cdev);
-	u32 reg = LUB_DISC_BLNK_LED;
-
-	if (b != LED_OFF)
-		reg |= led->mask;
-	else
-		reg &= ~led->mask;
-
-	LUB_DISC_BLNK_LED = reg;
-}
-
-static enum led_brightness lubbock_led_get(struct led_classdev *cdev)
-{
-	struct lubbock_led *led = container_of(cdev,
-					 struct lubbock_led, cdev);
-	u32 reg = LUB_DISC_BLNK_LED;
-
-	return (reg & led->mask) ? LED_FULL : LED_OFF;
-}
-
-static int __init lubbock_leds_init(void)
-{
-	int i;
-
-	if (!machine_is_lubbock())
-		return -ENODEV;
-
-	/* All ON */
-	LUB_DISC_BLNK_LED |= 0xff;
-	for (i = 0; i < ARRAY_SIZE(lubbock_leds); i++) {
-		struct lubbock_led *led;
-
-		led = kzalloc(sizeof(*led), GFP_KERNEL);
-		if (!led)
-			break;
-
-		led->cdev.name = lubbock_leds[i].name;
-		led->cdev.brightness_set = lubbock_led_set;
-		led->cdev.brightness_get = lubbock_led_get;
-		led->cdev.default_trigger = lubbock_leds[i].trigger;
-		led->mask = BIT(i);
-
-		if (led_classdev_register(NULL, &led->cdev) < 0) {
-			kfree(led);
-			break;
-		}
-	}
-
-	return 0;
-}
-
-/*
- * Since we may have triggers on any subsystem, defer registration
- * until after subsystem_init.
- */
-fs_initcall(lubbock_leds_init);
-#endif
-
-MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
-	/* Maintainer: MontaVista Software Inc. */
-	.map_io		= lubbock_map_io,
-	.nr_irqs	= LUBBOCK_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= lubbock_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/lubbock.h b/arch/arm/mach-pxa/lubbock.h
deleted file mode 100644
index 55cf91e22ae2..000000000000
--- a/arch/arm/mach-pxa/lubbock.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- */
-
-#include "irqs.h"
-
-#define LUBBOCK_ETH_PHYS	PXA_CS3_PHYS
-
-#define LUBBOCK_FPGA_PHYS	PXA_CS2_PHYS
-#define LUBBOCK_FPGA_VIRT	(0xf0000000)
-#define LUB_P2V(x)		((x) - LUBBOCK_FPGA_PHYS + LUBBOCK_FPGA_VIRT)
-#define LUB_V2P(x)		((x) - LUBBOCK_FPGA_VIRT + LUBBOCK_FPGA_PHYS)
-
-#ifndef __ASSEMBLY__
-#  define __LUB_REG(x)		(*((volatile unsigned long *)LUB_P2V(x)))
-#else
-#  define __LUB_REG(x)		LUB_P2V(x)
-#endif
-
-/* FPGA register virtual addresses */
-#define LUB_WHOAMI		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x000)
-#define LUB_DISC_BLNK_LED	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x040)
-#define LUB_CONF_SWITCHES	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x050)
-#define LUB_USER_SWITCHES	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x060)
-#define LUB_MISC_WR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
-#define LUB_MISC_RD		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x090)
-#define LUB_IRQ_MASK_EN		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x0c0)
-#define LUB_IRQ_SET_CLR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x0d0)
-#define LUB_GP			__LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)
-
-/* Board specific IRQs */
-#define LUBBOCK_NR_IRQS		IRQ_BOARD_START
-
-#define LUBBOCK_IRQ(x)		(LUBBOCK_NR_IRQS + (x))
-#define LUBBOCK_SD_IRQ		LUBBOCK_IRQ(0)
-#define LUBBOCK_SA1111_IRQ	LUBBOCK_IRQ(1)
-#define LUBBOCK_USB_IRQ		LUBBOCK_IRQ(2)  /* usb connect */
-#define LUBBOCK_ETH_IRQ		LUBBOCK_IRQ(3)
-#define LUBBOCK_UCB1400_IRQ	LUBBOCK_IRQ(4)
-#define LUBBOCK_BB_IRQ		LUBBOCK_IRQ(5)
-#define LUBBOCK_USB_DISC_IRQ	LUBBOCK_IRQ(6)  /* usb disconnect */
-#define LUBBOCK_LAST_IRQ	LUBBOCK_IRQ(6)
-
-#define LUBBOCK_SA1111_IRQ_BASE	(LUBBOCK_NR_IRQS + 32)
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
deleted file mode 100644
index 0827ebca1d38..000000000000
--- a/arch/arm/mach-pxa/magician.c
+++ /dev/null
@@ -1,1112 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Support for HTC Magician PDA phones:
- * i-mate JAM, O2 Xda mini, Orange SPV M500, Qtek s100, Qtek s110
- * and T-Mobile MDA Compact.
- *
- * Copyright (c) 2006-2007 Philipp Zabel
- *
- * Based on hx4700.c, spitz.c and others.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/mfd/htc-pasic3.h>
-#include <linux/mtd/physmap.h>
-#include <linux/pda_power.h>
-#include <linux/platform_data/gpio-htc-egpio.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/regulator/driver.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/gpio-regulator.h>
-#include <linux/regulator/machine.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/system_info.h>
-
-#include "pxa27x.h"
-#include "addr-map.h"
-#include "magician.h"
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-
-#include <linux/regulator/max1586.h>
-
-#include <linux/platform_data/pxa2xx_udc.h>
-
-#include "udc.h"
-#include "pxa27x-udc.h"
-#include "devices.h"
-#include "generic.h"
-
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/spi/ads7846.h>
-#include <sound/uda1380.h>
-
-static unsigned long magician_pin_config[] __initdata = {
-
-	/* SDRAM and Static Memory I/O Signals */
-	GPIO20_nSDCS_2,
-	GPIO21_nSDCS_3,
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,	/* PASIC3 */
-	GPIO79_nCS_3,	/* EGPIO CPLD */
-	GPIO80_nCS_4,
-	GPIO33_nCS_5,
-
-	/* I2C UDA1380 + OV9640 */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* PWM 0 - LCD backlight */
-	GPIO16_PWM0_OUT,
-
-	/* I2S UDA1380 capture */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO31_I2S_SYNC,
-	GPIO113_I2S_SYSCLK,
-
-	/* SSP 1 UDA1380 playback */
-	GPIO23_SSP1_SCLK,
-	GPIO24_SSP1_SFRM,
-	GPIO25_SSP1_TXD,
-
-	/* SSP 2 TSC2046 touchscreen */
-	GPIO19_SSP2_SCLK,
-	MFP_CFG_OUT(GPIO14, AF0, DRIVE_HIGH),	/* frame as GPIO */
-	GPIO89_SSP2_TXD,
-	GPIO88_SSP2_RXD,
-
-	/* MMC/SD/SDHC slot */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* QCI camera interface */
-	GPIO12_CIF_DD_7,
-	GPIO17_CIF_DD_6,
-	GPIO50_CIF_DD_3,
-	GPIO51_CIF_DD_2,
-	GPIO52_CIF_DD_4,
-	GPIO53_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO55_CIF_DD_1,
-	GPIO81_CIF_DD_0,
-	GPIO82_CIF_DD_5,
-	GPIO84_CIF_FV,
-	GPIO85_CIF_LV,
-
-	/* Magician specific input GPIOs */
-	GPIO9_GPIO,	/* unknown */
-	GPIO10_GPIO,	/* GSM_IRQ */
-	GPIO13_GPIO,	/* CPLD_IRQ */
-	GPIO107_GPIO,	/* DS1WM_IRQ */
-	GPIO108_GPIO,	/* GSM_READY */
-	GPIO115_GPIO,	/* nPEN_IRQ */
-};
-
-/*
- * IrDA
- */
-
-static struct pxaficp_platform_data magician_ficp_info = {
-	.gpio_pwdown		= GPIO83_MAGICIAN_nIR_EN,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-	.gpio_pwdown_inverted	= 0,
-};
-
-/*
- * GPIO Keys
- */
-
-#define INIT_KEY(_code, _gpio, _desc)	\
-	{				\
-		.code	= KEY_##_code,	\
-		.gpio	= _gpio,	\
-		.desc	= _desc,	\
-		.type	= EV_KEY,	\
-		.wakeup	= 1,		\
-	}
-
-static struct gpio_keys_button magician_button_table[] = {
-	INIT_KEY(POWER,      GPIO0_MAGICIAN_KEY_POWER,      "Power button"),
-	INIT_KEY(ESC,        GPIO37_MAGICIAN_KEY_HANGUP,    "Hangup button"),
-	INIT_KEY(F10,        GPIO38_MAGICIAN_KEY_CONTACTS,  "Contacts button"),
-	INIT_KEY(CALENDAR,   GPIO90_MAGICIAN_KEY_CALENDAR,  "Calendar button"),
-	INIT_KEY(CAMERA,     GPIO91_MAGICIAN_KEY_CAMERA,    "Camera button"),
-	INIT_KEY(UP,         GPIO93_MAGICIAN_KEY_UP,        "Up button"),
-	INIT_KEY(DOWN,       GPIO94_MAGICIAN_KEY_DOWN,      "Down button"),
-	INIT_KEY(LEFT,       GPIO95_MAGICIAN_KEY_LEFT,      "Left button"),
-	INIT_KEY(RIGHT,      GPIO96_MAGICIAN_KEY_RIGHT,     "Right button"),
-	INIT_KEY(KPENTER,    GPIO97_MAGICIAN_KEY_ENTER,     "Action button"),
-	INIT_KEY(RECORD,     GPIO98_MAGICIAN_KEY_RECORD,    "Record button"),
-	INIT_KEY(VOLUMEUP,   GPIO100_MAGICIAN_KEY_VOL_UP,   "Volume up"),
-	INIT_KEY(VOLUMEDOWN, GPIO101_MAGICIAN_KEY_VOL_DOWN, "Volume down"),
-	INIT_KEY(PHONE,      GPIO102_MAGICIAN_KEY_PHONE,    "Phone button"),
-	INIT_KEY(PLAY,       GPIO99_MAGICIAN_HEADPHONE_IN,  "Headset button"),
-};
-
-static struct gpio_keys_platform_data gpio_keys_data = {
-	.buttons	= magician_button_table,
-	.nbuttons	= ARRAY_SIZE(magician_button_table),
-};
-
-static struct platform_device gpio_keys = {
-	.name	= "gpio-keys",
-	.dev	= {
-		.platform_data = &gpio_keys_data,
-	},
-	.id	= -1,
-};
-
-/*
- * EGPIO (Xilinx CPLD)
- *
- * 32-bit aligned 8-bit registers
- * 16 possible registers (reg windows size), only 7 used:
- * 3x output, 1x irq, 3x input
- */
-
-static struct resource egpio_resources[] = {
-	[0] = {
-		.start	= PXA_CS3_PHYS,
-		.end	= PXA_CS3_PHYS + 0x20 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
-		.end	= PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct htc_egpio_chip egpio_chips[] = {
-	[0] = {
-		.reg_start	= 0,
-		.gpio_base	= MAGICIAN_EGPIO(0, 0),
-		.num_gpios	= 24,
-		.direction	= HTC_EGPIO_OUTPUT,
-		/*
-		 * Depends on modules configuration
-		 */
-		.initial_values	= 0x40, /* EGPIO_MAGICIAN_GSM_RESET */
-	},
-	[1] = {
-		.reg_start	= 4,
-		.gpio_base	= MAGICIAN_EGPIO(4, 0),
-		.num_gpios	= 24,
-		.direction	= HTC_EGPIO_INPUT,
-	},
-};
-
-static struct htc_egpio_platform_data egpio_info = {
-	.reg_width	= 8,
-	.bus_width	= 32,
-	.irq_base	= IRQ_BOARD_START,
-	.num_irqs	= 4,
-	.ack_register	= 3,
-	.chip		= egpio_chips,
-	.num_chips	= ARRAY_SIZE(egpio_chips),
-};
-
-static struct platform_device egpio = {
-	.name		= "htc-egpio",
-	.id		= -1,
-	.resource	= egpio_resources,
-	.num_resources	= ARRAY_SIZE(egpio_resources),
-	.dev = {
-		.platform_data = &egpio_info,
-	},
-};
-
-/*
- * PXAFB LCD - Toppoly TD028STEB1 or Samsung LTP280QV
- */
-
-static struct pxafb_mode_info toppoly_modes[] = {
-	{
-		.pixclock	= 96153,
-		.bpp		= 16,
-		.xres		= 240,
-		.yres		= 320,
-		.hsync_len	= 11,
-		.vsync_len	= 3,
-		.left_margin	= 19,
-		.upper_margin	= 2,
-		.right_margin	= 10,
-		.lower_margin	= 2,
-		.sync		= 0,
-	},
-};
-
-static struct pxafb_mode_info samsung_modes[] = {
-	{
-		.pixclock	= 226469,
-		.bpp		= 16,
-		.xres		= 240,
-		.yres		= 320,
-		.hsync_len	= 8,
-		.vsync_len	= 4,
-		.left_margin	= 9,
-		.upper_margin	= 4,
-		.right_margin	= 9,
-		.lower_margin	= 4,
-		.sync	= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	},
-};
-
-static void toppoly_lcd_power(int on, struct fb_var_screeninfo *si)
-{
-	pr_debug("Toppoly LCD power: %s\n", on ? "on" : "off");
-
-	if (on) {
-		gpio_set_value(EGPIO_MAGICIAN_TOPPOLY_POWER, 1);
-		gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 1);
-		udelay(2000);
-		gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1);
-		udelay(2000);
-		/* FIXME: enable LCDC here */
-		udelay(2000);
-		gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 1);
-		udelay(2000);
-		gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 1);
-	} else {
-		msleep(15);
-		gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 0);
-		udelay(500);
-		gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 0);
-		udelay(1000);
-		gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 0);
-		gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0);
-	}
-}
-
-static void samsung_lcd_power(int on, struct fb_var_screeninfo *si)
-{
-	pr_debug("Samsung LCD power: %s\n", on ? "on" : "off");
-
-	if (on) {
-		if (system_rev < 3)
-			gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 1);
-		else
-			gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1);
-		mdelay(6);
-		gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 1);
-		mdelay(6);	/* Avdd -> Voff >5ms */
-		gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 1);
-		mdelay(16);	/* Voff -> Von >(5+10)ms */
-		gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 1);
-	} else {
-		gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 0);
-		mdelay(16);
-		gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 0);
-		mdelay(6);
-		gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 0);
-		mdelay(6);
-		if (system_rev < 3)
-			gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 0);
-		else
-			gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0);
-	}
-}
-
-static struct pxafb_mach_info toppoly_info = {
-	.modes			= toppoly_modes,
-	.num_modes		= 1,
-	.fixed_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP,
-	.pxafb_lcd_power	= toppoly_lcd_power,
-};
-
-static struct pxafb_mach_info samsung_info = {
-	.modes			= samsung_modes,
-	.num_modes		= 1,
-	.fixed_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
-		LCD_ALTERNATE_MAPPING,
-	.pxafb_lcd_power	= samsung_lcd_power,
-};
-
-/*
- * Backlight
- */
-
-static struct pwm_lookup magician_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 30923,
-		   PWM_POLARITY_NORMAL),
-};
-
- /*
- * fixed regulator for pwm_backlight
- */
-
-static struct regulator_consumer_supply pwm_backlight_supply[] = {
-	REGULATOR_SUPPLY("power", "pwm_backlight"),
-};
-
-
-static struct gpio magician_bl_gpios[] = {
-	{ EGPIO_MAGICIAN_BL_POWER,	GPIOF_DIR_OUT, "Backlight power" },
-	{ EGPIO_MAGICIAN_BL_POWER2,	GPIOF_DIR_OUT, "Backlight power 2" },
-};
-
-static int magician_backlight_init(struct device *dev)
-{
-	return gpio_request_array(ARRAY_AND_SIZE(magician_bl_gpios));
-}
-
-static int magician_backlight_notify(struct device *dev, int brightness)
-{
-	pr_debug("Brightness = %i\n", brightness);
-	gpio_set_value(EGPIO_MAGICIAN_BL_POWER, brightness);
-	if (brightness >= 200) {
-		gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 1);
-		return brightness - 72;
-	} else {
-		gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 0);
-		return brightness;
-	}
-}
-
-static void magician_backlight_exit(struct device *dev)
-{
-	gpio_free_array(ARRAY_AND_SIZE(magician_bl_gpios));
-}
-
-/*
- * LCD PWM backlight (main)
- *
- * MP1521 frequency should be:
- *	100-400 Hz = 2 .5*10^6 - 10 *10^6 ns
- */
-
-static struct platform_pwm_backlight_data backlight_data = {
-	.max_brightness	= 272,
-	.dft_brightness	= 100,
-	.init		= magician_backlight_init,
-	.notify		= magician_backlight_notify,
-	.exit		= magician_backlight_exit,
-};
-
-static struct platform_device backlight = {
-	.name	= "pwm-backlight",
-	.id	= -1,
-	.dev	= {
-		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &backlight_data,
-	},
-};
-
-/*
- * GPIO LEDs, Phone keys backlight, vibra
- */
-
-static struct gpio_led gpio_leds[] = {
-	{
-		.name = "magician::vibra",
-		.default_trigger = "none",
-		.gpio = GPIO22_MAGICIAN_VIBRA_EN,
-	},
-	{
-		.name = "magician::phone_bl",
-		.default_trigger = "backlight",
-		.gpio = GPIO103_MAGICIAN_LED_KP,
-	},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds = gpio_leds,
-	.num_leds = ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &gpio_led_info,
-	},
-};
-
-/*
- * PASIC3 with DS1WM
- */
-
-static struct resource pasic3_resources[] = {
-	[0] = {
-		.start	= PXA_CS2_PHYS,
-		.end	= PXA_CS2_PHYS + 0x1b,
-		.flags	= IORESOURCE_MEM,
-	},
-	/* No IRQ handler in the PASIC3, DS1WM needs an external IRQ */
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
-		.end	= PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct pasic3_platform_data pasic3_platform_data = {
-	.clock_rate = 4000000,
-};
-
-static struct platform_device pasic3 = {
-	.name		= "pasic3",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pasic3_resources),
-	.resource	= pasic3_resources,
-	.dev = {
-		.platform_data = &pasic3_platform_data,
-	},
-};
-
-/*
- * PXA UDC
- */
-
-static void magician_udc_command(int cmd)
-{
-	if (cmd == PXA2XX_UDC_CMD_CONNECT)
-		UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE;
-	else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
-		UP2OCR &= ~(UP2OCR_DPPUE | UP2OCR_DPPUBE);
-}
-
-static struct pxa2xx_udc_mach_info magician_udc_info __initdata = {
-	.udc_command	= magician_udc_command,
-	.gpio_pullup	= GPIO27_MAGICIAN_USBC_PUEN,
-};
-
-/*
- * USB device VBus detection
- */
-
-static struct resource gpio_vbus_resource = {
-	.flags	= IORESOURCE_IRQ,
-	.start	= IRQ_MAGICIAN_VBUS,
-	.end	= IRQ_MAGICIAN_VBUS,
-};
-
-static struct gpiod_lookup_table gpio_vbus_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		/*
-		 * EGPIO on register 4 index 1, the second EGPIO chip
-		 * starts at register 4 so this will be at index 1 on that
-		 * chip.
-		 */
-		GPIO_LOOKUP("htc-egpio-1", 1,
-			    "vbus", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO27_MAGICIAN_USBC_PUEN,
-			    "pullup", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device gpio_vbus = {
-	.name		= "gpio-vbus",
-	.id		= -1,
-	.num_resources	= 1,
-	.resource	= &gpio_vbus_resource,
-};
-
-/*
- * External power
- */
-
-static int magician_supply_init(struct device *dev)
-{
-	int ret = -1;
-
-	ret = gpio_request(EGPIO_MAGICIAN_CABLE_TYPE, "Cable is AC charger");
-	if (ret) {
-		pr_err("Cannot request AC/USB charger GPIO (%i)\n", ret);
-		goto err_ac;
-	}
-
-	ret = gpio_request(EGPIO_MAGICIAN_CABLE_INSERTED, "Cable inserted");
-	if (ret) {
-		pr_err("Cannot request cable detection GPIO (%i)\n", ret);
-		goto err_usb;
-	}
-
-	return 0;
-
-err_usb:
-	gpio_free(EGPIO_MAGICIAN_CABLE_TYPE);
-err_ac:
-	return ret;
-}
-
-static void magician_set_charge(int flags)
-{
-	if (flags & PDA_POWER_CHARGE_AC) {
-		pr_debug("Charging from AC\n");
-		gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 1);
-	} else if (flags & PDA_POWER_CHARGE_USB) {
-		pr_debug("Charging from USB\n");
-		gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 1);
-	} else {
-		pr_debug("Charging disabled\n");
-		gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 0);
-	}
-}
-
-static int magician_is_ac_online(void)
-{
-	return gpio_get_value(EGPIO_MAGICIAN_CABLE_INSERTED) &&
-		gpio_get_value(EGPIO_MAGICIAN_CABLE_TYPE); /* AC=1 */
-}
-
-static int magician_is_usb_online(void)
-{
-	return gpio_get_value(EGPIO_MAGICIAN_CABLE_INSERTED) &&
-		(!gpio_get_value(EGPIO_MAGICIAN_CABLE_TYPE)); /* USB=0 */
-}
-
-static void magician_supply_exit(struct device *dev)
-{
-	gpio_free(EGPIO_MAGICIAN_CABLE_INSERTED);
-	gpio_free(EGPIO_MAGICIAN_CABLE_TYPE);
-}
-
-static char *magician_supplicants[] = {
-	"ds2760-battery.0", "backup-battery"
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init			= magician_supply_init,
-	.exit			= magician_supply_exit,
-	.is_ac_online		= magician_is_ac_online,
-	.is_usb_online		= magician_is_usb_online,
-	.set_charge		= magician_set_charge,
-	.supplied_to		= magician_supplicants,
-	.num_supplicants	= ARRAY_SIZE(magician_supplicants),
-};
-
-static struct resource power_supply_resources[] = {
-	[0] = {
-		.name	= "ac",
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-			IORESOURCE_IRQ_LOWEDGE,
-		.start	= IRQ_MAGICIAN_VBUS,
-		.end	= IRQ_MAGICIAN_VBUS,
-	},
-	[1] = {
-		.name	= "usb",
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-			IORESOURCE_IRQ_LOWEDGE,
-		.start	= IRQ_MAGICIAN_VBUS,
-		.end	= IRQ_MAGICIAN_VBUS,
-	},
-};
-
-static struct platform_device power_supply = {
-	.name	= "pda-power",
-	.id	= -1,
-	.dev = {
-		.platform_data = &power_supply_info,
-	},
-	.resource	= power_supply_resources,
-	.num_resources	= ARRAY_SIZE(power_supply_resources),
-};
-
-/*
- * Battery charger
- */
-
-static struct regulator_consumer_supply bq24022_consumers[] = {
-	REGULATOR_SUPPLY("vbus_draw", NULL),
-	REGULATOR_SUPPLY("ac_draw", NULL),
-};
-
-static struct regulator_init_data bq24022_init_data = {
-	.constraints = {
-		.max_uA		= 500000,
-		.valid_ops_mask	= REGULATOR_CHANGE_CURRENT |
-			REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(bq24022_consumers),
-	.consumer_supplies	= bq24022_consumers,
-};
-
-
-static enum gpiod_flags bq24022_gpiod_gflags[] = { GPIOD_OUT_LOW };
-
-static struct gpio_regulator_state bq24022_states[] = {
-	{ .value = 100000, .gpios = (0 << 0) },
-	{ .value = 500000, .gpios = (1 << 0) },
-};
-
-static struct gpio_regulator_config bq24022_info = {
-	.supply_name		= "bq24022",
-
-	.enabled_at_boot	= 1,
-
-	.gflags = bq24022_gpiod_gflags,
-	.ngpios = ARRAY_SIZE(bq24022_gpiod_gflags),
-
-	.states			= bq24022_states,
-	.nr_states		= ARRAY_SIZE(bq24022_states),
-
-	.type			= REGULATOR_CURRENT,
-	.init_data		= &bq24022_init_data,
-};
-
-static struct platform_device bq24022 = {
-	.name	= "gpio-regulator",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &bq24022_info,
-	},
-};
-
-static struct gpiod_lookup_table bq24022_gpiod_table = {
-	.dev_id = "gpio-regulator",
-	.table = {
-		GPIO_LOOKUP("htc-egpio-0", EGPIO_MAGICIAN_BQ24022_ISET2 - MAGICIAN_EGPIO_BASE,
-			    NULL, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
-			    "enable", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-/*
- * fixed regulator for ads7846
- */
-
-static struct regulator_consumer_supply ads7846_supply =
-	REGULATOR_SUPPLY("vcc", "spi2.0");
-
-static struct regulator_init_data vads7846_regulator = {
-	.constraints	= {
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &ads7846_supply,
-};
-
-static struct fixed_voltage_config vads7846 = {
-	.supply_name	= "vads7846",
-	.microvolts	= 3300000, /* probably */
-	.startup_delay	= 0,
-	.init_data	= &vads7846_regulator,
-};
-
-static struct platform_device vads7846_device = {
-	.name	= "reg-fixed-voltage",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &vads7846,
-	},
-};
-
-/*
- * Vcore regulator MAX1587A
- */
-
-static struct regulator_consumer_supply magician_max1587a_consumers[] = {
-	REGULATOR_SUPPLY("vcc_core", NULL),
-};
-
-static struct regulator_init_data magician_max1587a_v3_info = {
-	.constraints = {
-		.name		= "vcc_core range",
-		.min_uV		= 700000,
-		.max_uV		= 1475000,
-		.always_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.consumer_supplies	= magician_max1587a_consumers,
-	.num_consumer_supplies	= ARRAY_SIZE(magician_max1587a_consumers),
-};
-
-static struct max1586_subdev_data magician_max1587a_subdevs[] = {
-	{
-		.name		= "vcc_core",
-		.id		= MAX1586_V3,
-		.platform_data	= &magician_max1587a_v3_info,
-	}
-};
-
-static struct max1586_platform_data magician_max1587a_info = {
-	.subdevs     = magician_max1587a_subdevs,
-	.num_subdevs = ARRAY_SIZE(magician_max1587a_subdevs),
-	/*
-	 * NOTICE measured directly on the PCB (board_id == 0x3a), but
-	 * if R24 is present, it will boost the voltage
-	 * (write 1.475V, get 1.645V and smoke)
-	 */
-	.v3_gain     = MAX1586_GAIN_NO_R24,
-};
-
-static struct i2c_board_info magician_pwr_i2c_board_info[] __initdata = {
-	{
-		I2C_BOARD_INFO("max1586", 0x14),
-		.platform_data	= &magician_max1587a_info,
-	},
-};
-
-/*
- * MMC/SD
- */
-
-static int magician_mci_init(struct device *dev,
-	irq_handler_t detect_irq, void *data)
-{
-	return request_irq(IRQ_MAGICIAN_SD, detect_irq, 0,
-		"mmc card detect", data);
-}
-
-static void magician_mci_exit(struct device *dev, void *data)
-{
-	free_irq(IRQ_MAGICIAN_SD, data);
-}
-
-static struct pxamci_platform_data magician_mci_info = {
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init			= magician_mci_init,
-	.exit			= magician_mci_exit,
-	.gpio_card_ro_invert	= 1,
-};
-
-/*
- * Write protect on EGPIO register 5 index 4, this is on the second HTC
- * EGPIO chip which starts at register 4, so we need offset 8+4=12 on that
- * particular chip.
- */
-#define EGPIO_MAGICIAN_nSD_READONLY_OFFSET 12
-/*
- * Power on EGPIO register 2 index 0, so this is on the first HTC EGPIO chip
- * starting at register 0 so we need offset 2*8+0 = 16 on that chip.
- */
-#define EGPIO_MAGICIAN_nSD_POWER_OFFSET 16
-
-static struct gpiod_lookup_table magician_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("htc-egpio-1", EGPIO_MAGICIAN_nSD_READONLY_OFFSET,
-			    "wp", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("htc-egpio-0", EGPIO_MAGICIAN_nSD_POWER_OFFSET,
-			    "power", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/*
- * USB OHCI
- */
-
-static struct pxaohci_platform_data magician_ohci_info = {
-	.port_mode	= PMM_PERPORT_MODE,
-	/* port1: CSR Bluetooth, port2: OTG with UDC */
-	.flags		= ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
-	.power_budget	= 0,
-	.power_on_delay = 100,
-};
-
-/*
- * StrataFlash
- */
-
-static int magician_flash_init(struct platform_device *pdev)
-{
-	int ret = gpio_request(EGPIO_MAGICIAN_FLASH_VPP, "flash Vpp enable");
-
-	if (ret) {
-		pr_err("Cannot request flash enable GPIO (%i)\n", ret);
-		return ret;
-	}
-
-	ret = gpio_direction_output(EGPIO_MAGICIAN_FLASH_VPP, 1);
-	if (ret) {
-		pr_err("Cannot set direction for flash enable (%i)\n", ret);
-		gpio_free(EGPIO_MAGICIAN_FLASH_VPP);
-	}
-
-	return ret;
-}
-
-static void magician_set_vpp(struct platform_device *pdev, int vpp)
-{
-	gpio_set_value(EGPIO_MAGICIAN_FLASH_VPP, vpp);
-}
-
-static void magician_flash_exit(struct platform_device *pdev)
-{
-	gpio_free(EGPIO_MAGICIAN_FLASH_VPP);
-}
-
-static struct resource strataflash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_64M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct mtd_partition magician_flash_parts[] = {
-	{
-		.name		= "Bootloader",
-		.offset		= 0x0,
-		.size		= 0x40000,
-		.mask_flags	= MTD_WRITEABLE, /* EXPERIMENTAL */
-	},
-	{
-		.name		= "Linux Kernel",
-		.offset		= 0x40000,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-/*
- * physmap-flash driver
- */
-
-static struct physmap_flash_data strataflash_data = {
-	.width		= 4,
-	.init		= magician_flash_init,
-	.set_vpp	= magician_set_vpp,
-	.exit		= magician_flash_exit,
-	.parts		= magician_flash_parts,
-	.nr_parts	= ARRAY_SIZE(magician_flash_parts),
-};
-
-static struct platform_device strataflash = {
-	.name		= "physmap-flash",
-	.id		= -1,
-	.resource	= &strataflash_resource,
-	.num_resources	= 1,
-	.dev = {
-		.platform_data = &strataflash_data,
-	},
-};
-
-/*
- * audio support
- */
-static struct uda1380_platform_data uda1380_info = {
-	.gpio_power = EGPIO_MAGICIAN_CODEC_POWER,
-	.gpio_reset = EGPIO_MAGICIAN_CODEC_RESET,
-	.dac_clk    = UDA1380_DAC_CLK_WSPLL,
-};
-
-static struct i2c_board_info magician_audio_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("uda1380", 0x18),
-		.platform_data = &uda1380_info,
-	},
-};
-
-static struct gpiod_lookup_table magician_audio_gpio_table = {
-	.dev_id = "magician-audio",
-	.table = {
-		GPIO_LOOKUP("htc-egpio-0",
-			    EGPIO_MAGICIAN_SPK_POWER - MAGICIAN_EGPIO_BASE,
-			    "SPK_POWER", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("htc-egpio-0",
-			    EGPIO_MAGICIAN_EP_POWER - MAGICIAN_EGPIO_BASE,
-			    "EP_POWER", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("htc-egpio-0",
-			    EGPIO_MAGICIAN_MIC_POWER - MAGICIAN_EGPIO_BASE,
-			    "MIC_POWER", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("htc-egpio-0",
-			    EGPIO_MAGICIAN_IN_SEL0 - MAGICIAN_EGPIO_BASE,
-			    "IN_SEL0", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("htc-egpio-0",
-			    EGPIO_MAGICIAN_IN_SEL1 - MAGICIAN_EGPIO_BASE,
-			    "IN_SEL1", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static void magician_audio_init(void)
-{
-	i2c_register_board_info(0,
-		ARRAY_AND_SIZE(magician_audio_i2c_board_info));
-
-	gpiod_add_lookup_table(&magician_audio_gpio_table);
-	platform_device_register_simple("magician-audio", -1, NULL, 0);
-}
-
-/*
- * PXA I2C main controller
- */
-
-static struct i2c_pxa_platform_data i2c_info = {
-	/* OV9640 I2C device doesn't support fast mode */
-	.fast_mode	= 0,
-};
-
-/*
- * PXA I2C power controller
- */
-
-static struct i2c_pxa_platform_data magician_i2c_power_info = {
-	.fast_mode	= 1,
-};
-
-/*
- * Touchscreen
- */
-
-static struct ads7846_platform_data ads7846_pdata = {
-	.model		= 7846,
-	.x_plate_ohms	= 317,
-	.y_plate_ohms	= 500,
-	.pressure_max	= 1023,	/* with x plate ohms it will overflow 255 */
-	.debounce_max	= 3,	/* first readout is always bad */
-	.debounce_tol	= 30,
-	.debounce_rep	= 0,
-	.gpio_pendown	= GPIO115_MAGICIAN_nPEN_IRQ,
-	.keep_vref_on	= 1,
-	.wakeup		= true,
-	.vref_delay_usecs		= 100,
-	.penirq_recheck_delay_usecs	= 100,
-};
-
-struct pxa2xx_spi_chip tsc2046_chip_info = {
-	.tx_threshold	= 1,
-	.rx_threshold	= 2,
-	.timeout	= 64,
-};
-
-static struct pxa2xx_spi_controller magician_spi_info = {
-	.num_chipselect	= 1,
-	.enable_dma	= 1,
-};
-
-static struct gpiod_lookup_table magician_spi_gpio_table = {
-	.dev_id = "spi2",
-	.table = {
-		/* NOTICE must be GPIO, incompatibility with hw PXA SPI framing */
-		GPIO_LOOKUP_IDX("gpio-pxa", GPIO14_MAGICIAN_TSC2046_CS, "cs", 0, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct spi_board_info ads7846_spi_board_info[] __initdata = {
-	{
-		.modalias		= "ads7846",
-		.bus_num		= 2,
-		.max_speed_hz		= 2500000,
-		.platform_data		= &ads7846_pdata,
-		.controller_data	= &tsc2046_chip_info,
-		.irq = PXA_GPIO_TO_IRQ(GPIO115_MAGICIAN_nPEN_IRQ),
-	},
-};
-
-/*
- * Platform devices
- */
-
-static struct platform_device *devices[] __initdata = {
-	&gpio_keys,
-	&egpio,
-	&backlight,
-	&pasic3,
-	&bq24022,
-	&gpio_vbus,
-	&power_supply,
-	&strataflash,
-	&leds_gpio,
-	&vads7846_device,
-};
-
-static struct gpio magician_global_gpios[] = {
-	{ GPIO13_MAGICIAN_CPLD_IRQ, GPIOF_IN, "CPLD_IRQ" },
-	{ GPIO107_MAGICIAN_DS1WM_IRQ, GPIOF_IN, "DS1WM_IRQ" },
-
-	/* NOTICE valid LCD init sequence */
-	{ GPIO106_MAGICIAN_LCD_DCDC_NRESET, GPIOF_OUT_INIT_LOW, "LCD DCDC nreset" },
-	{ GPIO104_MAGICIAN_LCD_VOFF_EN, GPIOF_OUT_INIT_LOW, "LCD VOFF enable" },
-	{ GPIO105_MAGICIAN_LCD_VON_EN, GPIOF_OUT_INIT_LOW, "LCD VON enable" },
-};
-
-static void __init magician_init(void)
-{
-	void __iomem *cpld;
-	int lcd_select;
-	int err;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config));
-	err = gpio_request_array(ARRAY_AND_SIZE(magician_global_gpios));
-	if (err)
-		pr_err("magician: Failed to request global GPIOs: %d\n", err);
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-
-	pwm_add_table(magician_pwm_lookup, ARRAY_SIZE(magician_pwm_lookup));
-
-	pxa_set_ficp_info(&magician_ficp_info);
-	pxa27x_set_i2c_power_info(&magician_i2c_power_info);
-	pxa_set_i2c_info(&i2c_info);
-
-	i2c_register_board_info(1,
-		ARRAY_AND_SIZE(magician_pwr_i2c_board_info));
-
-	gpiod_add_lookup_table(&magician_mci_gpio_table);
-	pxa_set_mci_info(&magician_mci_info);
-	pxa_set_ohci_info(&magician_ohci_info);
-	pxa_set_udc_info(&magician_udc_info);
-
-	/* Check LCD type we have */
-	cpld = ioremap(PXA_CS3_PHYS, 0x1000);
-	if (cpld) {
-		u8 board_id = __raw_readb(cpld + 0x14);
-
-		iounmap(cpld);
-		system_rev = board_id & 0x7;
-		lcd_select = board_id & 0x8;
-		pr_info("LCD type: %s\n", lcd_select ? "Samsung" : "Toppoly");
-		if (lcd_select && (system_rev < 3))
-			/* NOTICE valid LCD init sequence */
-			gpio_request_one(GPIO75_MAGICIAN_SAMSUNG_POWER,
-				GPIOF_OUT_INIT_LOW, "Samsung LCD Power");
-		pxa_set_fb_info(NULL,
-			lcd_select ? &samsung_info : &toppoly_info);
-	} else
-		pr_err("LCD detection: CPLD mapping failed\n");
-
-	gpiod_add_lookup_table(&magician_spi_gpio_table);
-	pxa2xx_set_spi_info(2, &magician_spi_info);
-	spi_register_board_info(ARRAY_AND_SIZE(ads7846_spi_board_info));
-
-	regulator_register_always_on(0, "power", pwm_backlight_supply,
-		ARRAY_SIZE(pwm_backlight_supply), 5000000);
-
-	gpiod_add_lookup_table(&bq24022_gpiod_table);
-	gpiod_add_lookup_table(&gpio_vbus_gpiod_table);
-	platform_add_devices(ARRAY_AND_SIZE(devices));
-
-	magician_audio_init();
-}
-
-MACHINE_START(MAGICIAN, "HTC Magician")
-	.atag_offset	= 0x100,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= MAGICIAN_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_machine	= magician_init,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/magician.h b/arch/arm/mach-pxa/magician.h
deleted file mode 100644
index e1e4f9f6b22b..000000000000
--- a/arch/arm/mach-pxa/magician.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * GPIO and IRQ definitions for HTC Magician PDA phones
- *
- * Copyright (c) 2007 Philipp Zabel
- */
-
-#ifndef _MAGICIAN_H_
-#define _MAGICIAN_H_
-
-#include <linux/gpio.h>
-#include "irqs.h"
-
-/*
- * PXA GPIOs
- */
-
-#define GPIO0_MAGICIAN_KEY_POWER		0
-#define GPIO9_MAGICIAN_UNKNOWN			9
-#define GPIO10_MAGICIAN_GSM_IRQ			10
-#define GPIO11_MAGICIAN_GSM_OUT1		11
-#define GPIO13_MAGICIAN_CPLD_IRQ		13
-#define GPIO14_MAGICIAN_TSC2046_CS		14
-#define GPIO18_MAGICIAN_UNKNOWN			18
-#define GPIO22_MAGICIAN_VIBRA_EN		22
-#define GPIO26_MAGICIAN_GSM_POWER		26
-#define GPIO27_MAGICIAN_USBC_PUEN		27
-#define GPIO30_MAGICIAN_BQ24022_nCHARGE_EN	30
-#define GPIO37_MAGICIAN_KEY_HANGUP		37
-#define GPIO38_MAGICIAN_KEY_CONTACTS		38
-#define GPIO40_MAGICIAN_GSM_OUT2		40
-#define GPIO48_MAGICIAN_UNKNOWN			48
-#define GPIO56_MAGICIAN_UNKNOWN			56
-#define GPIO57_MAGICIAN_CAM_RESET		57
-#define GPIO75_MAGICIAN_SAMSUNG_POWER		75
-#define GPIO83_MAGICIAN_nIR_EN			83
-#define GPIO86_MAGICIAN_GSM_RESET		86
-#define GPIO87_MAGICIAN_GSM_SELECT		87
-#define GPIO90_MAGICIAN_KEY_CALENDAR		90
-#define GPIO91_MAGICIAN_KEY_CAMERA		91
-#define GPIO93_MAGICIAN_KEY_UP			93
-#define GPIO94_MAGICIAN_KEY_DOWN		94
-#define GPIO95_MAGICIAN_KEY_LEFT		95
-#define GPIO96_MAGICIAN_KEY_RIGHT		96
-#define GPIO97_MAGICIAN_KEY_ENTER		97
-#define GPIO98_MAGICIAN_KEY_RECORD		98
-#define GPIO99_MAGICIAN_HEADPHONE_IN		99
-#define GPIO100_MAGICIAN_KEY_VOL_UP		100
-#define GPIO101_MAGICIAN_KEY_VOL_DOWN 		101
-#define GPIO102_MAGICIAN_KEY_PHONE		102
-#define GPIO103_MAGICIAN_LED_KP			103
-#define GPIO104_MAGICIAN_LCD_VOFF_EN		104
-#define GPIO105_MAGICIAN_LCD_VON_EN		105
-#define GPIO106_MAGICIAN_LCD_DCDC_NRESET	106
-#define GPIO107_MAGICIAN_DS1WM_IRQ		107
-#define GPIO108_MAGICIAN_GSM_READY		108
-#define GPIO114_MAGICIAN_UNKNOWN		114
-#define GPIO115_MAGICIAN_nPEN_IRQ		115
-#define GPIO116_MAGICIAN_nCAM_EN		116
-#define GPIO119_MAGICIAN_UNKNOWN		119
-#define GPIO120_MAGICIAN_UNKNOWN		120
-
-/*
- * CPLD IRQs
- */
-
-#define IRQ_MAGICIAN_SD		(IRQ_BOARD_START + 0)
-#define IRQ_MAGICIAN_EP		(IRQ_BOARD_START + 1)
-#define IRQ_MAGICIAN_BT		(IRQ_BOARD_START + 2)
-#define IRQ_MAGICIAN_VBUS	(IRQ_BOARD_START + 3)
-
-#define MAGICIAN_NR_IRQS	(IRQ_BOARD_START + 8)
-
-/*
- * CPLD EGPIOs
- */
-
-#define MAGICIAN_EGPIO_BASE		PXA_NR_BUILTIN_GPIO
-#define MAGICIAN_EGPIO(reg,bit) \
-	(MAGICIAN_EGPIO_BASE + 8*reg + bit)
-
-/* output */
-
-#define EGPIO_MAGICIAN_TOPPOLY_POWER	MAGICIAN_EGPIO(0, 2)
-#define EGPIO_MAGICIAN_LED_POWER	MAGICIAN_EGPIO(0, 5)
-#define EGPIO_MAGICIAN_GSM_RESET	MAGICIAN_EGPIO(0, 6)
-#define EGPIO_MAGICIAN_LCD_POWER	MAGICIAN_EGPIO(0, 7)
-#define EGPIO_MAGICIAN_SPK_POWER	MAGICIAN_EGPIO(1, 0)
-#define EGPIO_MAGICIAN_EP_POWER		MAGICIAN_EGPIO(1, 1)
-#define EGPIO_MAGICIAN_IN_SEL0		MAGICIAN_EGPIO(1, 2)
-#define EGPIO_MAGICIAN_IN_SEL1		MAGICIAN_EGPIO(1, 3)
-#define EGPIO_MAGICIAN_MIC_POWER	MAGICIAN_EGPIO(1, 4)
-#define EGPIO_MAGICIAN_CODEC_RESET	MAGICIAN_EGPIO(1, 5)
-#define EGPIO_MAGICIAN_CODEC_POWER	MAGICIAN_EGPIO(1, 6)
-#define EGPIO_MAGICIAN_BL_POWER		MAGICIAN_EGPIO(1, 7)
-#define EGPIO_MAGICIAN_SD_POWER		MAGICIAN_EGPIO(2, 0)
-#define EGPIO_MAGICIAN_CARKIT_MIC	MAGICIAN_EGPIO(2, 1)
-#define EGPIO_MAGICIAN_IR_RX_SHUTDOWN	MAGICIAN_EGPIO(2, 2)
-#define EGPIO_MAGICIAN_FLASH_VPP	MAGICIAN_EGPIO(2, 3)
-#define EGPIO_MAGICIAN_BL_POWER2	MAGICIAN_EGPIO(2, 4)
-#define EGPIO_MAGICIAN_BQ24022_ISET2	MAGICIAN_EGPIO(2, 5)
-#define EGPIO_MAGICIAN_NICD_CHARGE	MAGICIAN_EGPIO(2, 6)
-#define EGPIO_MAGICIAN_GSM_POWER	MAGICIAN_EGPIO(2, 7)
-
-/* input */
-
-/* USB or AC charger type */
-#define EGPIO_MAGICIAN_CABLE_TYPE	MAGICIAN_EGPIO(4, 0)
-/*
- * Vbus is detected
- * FIXME behaves like (6,3), may differ for host/device
- */
-#define EGPIO_MAGICIAN_CABLE_VBUS	MAGICIAN_EGPIO(4, 1)
-
-#define EGPIO_MAGICIAN_BOARD_ID0	MAGICIAN_EGPIO(5, 0)
-#define EGPIO_MAGICIAN_BOARD_ID1	MAGICIAN_EGPIO(5, 1)
-#define EGPIO_MAGICIAN_BOARD_ID2	MAGICIAN_EGPIO(5, 2)
-#define EGPIO_MAGICIAN_LCD_SELECT	MAGICIAN_EGPIO(5, 3)
-#define EGPIO_MAGICIAN_nSD_READONLY	MAGICIAN_EGPIO(5, 4)
-
-#define EGPIO_MAGICIAN_EP_INSERT	MAGICIAN_EGPIO(6, 1)
-/* FIXME behaves like (4,1), may differ for host/device */
-#define EGPIO_MAGICIAN_CABLE_INSERTED	MAGICIAN_EGPIO(6, 3)
-
-#endif /* _MAGICIAN_H_ */
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
deleted file mode 100644
index fd386f1c414c..000000000000
--- a/arch/arm/mach-pxa/mainstone.c
+++ /dev/null
@@ -1,738 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/mainstone.c
- *
- *  Support for the Intel HCDDBBVA0 Development Platform.
- *  (go figure how they came up with such name...)
- *
- *  Author:	Nicolas Pitre
- *  Created:	Nov 05, 2002
- *  Copyright:	MontaVista Software Inc.
- */
-#include <linux/gpio.h>
-#include <linux/gpio/gpio-reg.h>
-#include <linux/gpio/machine.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/bitops.h>
-#include <linux/fb.h>
-#include <linux/ioport.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/smc91x.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/slab.h>
-#include <linux/leds.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <linux/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include "pxa27x.h"
-#include "mainstone.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include "addr-map.h"
-#include "smemc.h"
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned long mainstone_pin_config[] = {
-	/* Chip Select */
-	GPIO15_nCS_1,
-
-	/* LCD - 16bpp Active TFT */
-	GPIOxx_LCD_TFT_16BPP,
-	GPIO16_PWM0_OUT,	/* Backlight */
-
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO112_MMC_CMD,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-
-	/* USB Host Port 1 */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-
-	/* PC Card */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO79_PSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO45_AC97_SYSCLK,
-
-	/* Keypad */
-	GPIO93_KP_DKIN_0,
-	GPIO94_KP_DKIN_1,
-	GPIO95_KP_DKIN_2,
-	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO98_KP_MKIN_4	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO99_KP_MKIN_5	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-	GPIO96_KP_MKOUT_6,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* GPIO */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= (MST_ETH_PHYS + 0x300),
-		.end	= (MST_ETH_PHYS + 0xfffff),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= MAINSTONE_IRQ(3),
-		.end	= MAINSTONE_IRQ(3),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct smc91x_platdata mainstone_smc91x_info = {
-	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
-		  SMC91X_NOWAIT | SMC91X_USE_DMA,
-	.pxa_u16_align4 = true,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &mainstone_smc91x_info,
-	},
-};
-
-static int mst_audio_startup(struct snd_pcm_substream *substream, void *priv)
-{
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		MST_MSCWR2 &= ~MST_MSCWR2_AC97_SPKROFF;
-	return 0;
-}
-
-static void mst_audio_shutdown(struct snd_pcm_substream *substream, void *priv)
-{
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		MST_MSCWR2 |= MST_MSCWR2_AC97_SPKROFF;
-}
-
-static long mst_audio_suspend_mask;
-
-static void mst_audio_suspend(void *priv)
-{
-	mst_audio_suspend_mask = MST_MSCWR2;
-	MST_MSCWR2 |= MST_MSCWR2_AC97_SPKROFF;
-}
-
-static void mst_audio_resume(void *priv)
-{
-	MST_MSCWR2 &= mst_audio_suspend_mask | ~MST_MSCWR2_AC97_SPKROFF;
-}
-
-static pxa2xx_audio_ops_t mst_audio_ops = {
-	.startup	= mst_audio_startup,
-	.shutdown	= mst_audio_shutdown,
-	.suspend	= mst_audio_suspend,
-	.resume		= mst_audio_resume,
-};
-
-static struct resource flash_resources[] = {
-	[0] = {
-		.start	= PXA_CS0_PHYS,
-		.end	= PXA_CS0_PHYS + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_CS1_PHYS,
-		.end	= PXA_CS1_PHYS + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct mtd_partition mainstoneflash0_partitions[] = {
-	{
-		.name =		"Bootloader",
-		.size =		0x00040000,
-		.offset =	0,
-		.mask_flags =	MTD_WRITEABLE  /* force read-only */
-	},{
-		.name =		"Kernel",
-		.size =		0x00400000,
-		.offset =	0x00040000,
-	},{
-		.name =		"Filesystem",
-		.size =		MTDPART_SIZ_FULL,
-		.offset =	0x00440000
-	}
-};
-
-static struct flash_platform_data mst_flash_data[2] = {
-	{
-		.map_name	= "cfi_probe",
-		.parts		= mainstoneflash0_partitions,
-		.nr_parts	= ARRAY_SIZE(mainstoneflash0_partitions),
-	}, {
-		.map_name	= "cfi_probe",
-		.parts		= NULL,
-		.nr_parts	= 0,
-	}
-};
-
-static struct platform_device mst_flash_device[2] = {
-	{
-		.name		= "pxa2xx-flash",
-		.id		= 0,
-		.dev = {
-			.platform_data = &mst_flash_data[0],
-		},
-		.resource = &flash_resources[0],
-		.num_resources = 1,
-	},
-	{
-		.name		= "pxa2xx-flash",
-		.id		= 1,
-		.dev = {
-			.platform_data = &mst_flash_data[1],
-		},
-		.resource = &flash_resources[1],
-		.num_resources = 1,
-	},
-};
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pwm_lookup mainstone_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data mainstone_backlight_data = {
-	.max_brightness	= 1023,
-	.dft_brightness	= 1023,
-};
-
-static struct platform_device mainstone_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent = &pxa27x_device_pwm0.dev,
-		.platform_data = &mainstone_backlight_data,
-	},
-};
-
-static void __init mainstone_backlight_register(void)
-{
-	int ret;
-
-	pwm_add_table(mainstone_pwm_lookup, ARRAY_SIZE(mainstone_pwm_lookup));
-
-	ret = platform_device_register(&mainstone_backlight_device);
-	if (ret) {
-		printk(KERN_ERR "mainstone: failed to register backlight device: %d\n", ret);
-		pwm_remove_table(mainstone_pwm_lookup,
-				 ARRAY_SIZE(mainstone_pwm_lookup));
-	}
-}
-#else
-#define mainstone_backlight_register()	do { } while (0)
-#endif
-
-static struct pxafb_mode_info toshiba_ltm04c380k_mode = {
-	.pixclock		= 50000,
-	.xres			= 640,
-	.yres			= 480,
-	.bpp			= 16,
-	.hsync_len		= 1,
-	.left_margin		= 0x9f,
-	.right_margin		= 1,
-	.vsync_len		= 44,
-	.upper_margin		= 0,
-	.lower_margin		= 0,
-	.sync			= FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mode_info toshiba_ltm035a776c_mode = {
-	.pixclock		= 110000,
-	.xres			= 240,
-	.yres			= 320,
-	.bpp			= 16,
-	.hsync_len		= 4,
-	.left_margin		= 8,
-	.right_margin		= 20,
-	.vsync_len		= 3,
-	.upper_margin		= 1,
-	.lower_margin		= 10,
-	.sync			= FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info mainstone_pxafb_info = {
-	.num_modes      	= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static int mainstone_mci_init(struct device *dev, irq_handler_t mstone_detect_int, void *data)
-{
-	int err;
-
-	/* make sure SD/Memory Stick multiplexer's signals
-	 * are routed to MMC controller
-	 */
-	MST_MSCWR1 &= ~MST_MSCWR1_MS_SEL;
-
-	err = request_irq(MAINSTONE_MMC_IRQ, mstone_detect_int, 0,
-			     "MMC card detect", data);
-	if (err)
-		printk(KERN_ERR "mainstone_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
-
-	return err;
-}
-
-static int mainstone_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data* p_d = dev->platform_data;
-
-	if (( 1 << vdd) & p_d->ocr_mask) {
-		printk(KERN_DEBUG "%s: on\n", __func__);
-		MST_MSCWR1 |= MST_MSCWR1_MMC_ON;
-		MST_MSCWR1 &= ~MST_MSCWR1_MS_SEL;
-	} else {
-		printk(KERN_DEBUG "%s: off\n", __func__);
-		MST_MSCWR1 &= ~MST_MSCWR1_MMC_ON;
-	}
-	return 0;
-}
-
-static void mainstone_mci_exit(struct device *dev, void *data)
-{
-	free_irq(MAINSTONE_MMC_IRQ, data);
-}
-
-static struct pxamci_platform_data mainstone_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 			= mainstone_mci_init,
-	.setpower 		= mainstone_mci_setpower,
-	.exit			= mainstone_mci_exit,
-};
-
-static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if (mode & IR_SIRMODE) {
-		MST_MSCWR1 &= ~MST_MSCWR1_IRDA_FIR;
-	} else if (mode & IR_FIRMODE) {
-		MST_MSCWR1 |= MST_MSCWR1_IRDA_FIR;
-	}
-	pxa2xx_transceiver_mode(dev, mode);
-	if (mode & IR_OFF) {
-		MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_OFF;
-	} else {
-		MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_FULL;
-	}
-	local_irq_restore(flags);
-}
-
-static struct pxaficp_platform_data mainstone_ficp_platform_data = {
-	.gpio_pwdown		= -1,
-	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode	= mainstone_irda_transceiver_mode,
-};
-
-static struct gpio_keys_button gpio_keys_button[] = {
-	[0] = {
-		.desc	= "wakeup",
-		.code	= KEY_SUSPEND,
-		.type	= EV_KEY,
-		.gpio	= 1,
-		.wakeup	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data mainstone_gpio_keys = {
-	.buttons	= gpio_keys_button,
-	.nbuttons	= 1,
-};
-
-static struct platform_device mst_gpio_keys_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &mainstone_gpio_keys,
-	},
-};
-
-static struct resource mst_cplds_resources[] = {
-	[0] = {
-		.start	= MST_FPGA_PHYS + 0xc0,
-		.end	= MST_FPGA_PHYS + 0xe0 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(0),
-		.end	= PXA_GPIO_TO_IRQ(0),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-	[2] = {
-		.start	= MAINSTONE_IRQ(0),
-		.end	= MAINSTONE_IRQ(15),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mst_cplds_device = {
-	.name		= "pxa_cplds_irqs",
-	.id		= -1,
-	.resource	= &mst_cplds_resources[0],
-	.num_resources	= 3,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&smc91x_device,
-	&mst_flash_device[0],
-	&mst_flash_device[1],
-	&mst_gpio_keys_device,
-	&mst_cplds_device,
-};
-
-static struct pxaohci_platform_data mainstone_ohci_platform_data = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static const unsigned int mainstone_matrix_keys[] = {
-	KEY(0, 0, KEY_A), KEY(1, 0, KEY_B), KEY(2, 0, KEY_C),
-	KEY(3, 0, KEY_D), KEY(4, 0, KEY_E), KEY(5, 0, KEY_F),
-	KEY(0, 1, KEY_G), KEY(1, 1, KEY_H), KEY(2, 1, KEY_I),
-	KEY(3, 1, KEY_J), KEY(4, 1, KEY_K), KEY(5, 1, KEY_L),
-	KEY(0, 2, KEY_M), KEY(1, 2, KEY_N), KEY(2, 2, KEY_O),
-	KEY(3, 2, KEY_P), KEY(4, 2, KEY_Q), KEY(5, 2, KEY_R),
-	KEY(0, 3, KEY_S), KEY(1, 3, KEY_T), KEY(2, 3, KEY_U),
-	KEY(3, 3, KEY_V), KEY(4, 3, KEY_W), KEY(5, 3, KEY_X),
-	KEY(2, 4, KEY_Y), KEY(3, 4, KEY_Z),
-
-	KEY(0, 4, KEY_DOT),	/* . */
-	KEY(1, 4, KEY_CLOSE),	/* @ */
-	KEY(4, 4, KEY_SLASH),
-	KEY(5, 4, KEY_BACKSLASH),
-	KEY(0, 5, KEY_HOME),
-	KEY(1, 5, KEY_LEFTSHIFT),
-	KEY(2, 5, KEY_SPACE),
-	KEY(3, 5, KEY_SPACE),
-	KEY(4, 5, KEY_ENTER),
-	KEY(5, 5, KEY_BACKSPACE),
-
-	KEY(0, 6, KEY_UP),
-	KEY(1, 6, KEY_DOWN),
-	KEY(2, 6, KEY_LEFT),
-	KEY(3, 6, KEY_RIGHT),
-	KEY(4, 6, KEY_SELECT),
-};
-
-static struct matrix_keymap_data mainstone_matrix_keymap_data = {
-	.keymap			= mainstone_matrix_keys,
-	.keymap_size		= ARRAY_SIZE(mainstone_matrix_keys),
-};
-
-struct pxa27x_keypad_platform_data mainstone_keypad_info = {
-	.matrix_key_rows	= 6,
-	.matrix_key_cols	= 7,
-	.matrix_keymap_data	= &mainstone_matrix_keymap_data,
-
-	.enable_rotary0		= 1,
-	.rotary0_up_key		= KEY_UP,
-	.rotary0_down_key	= KEY_DOWN,
-
-	.debounce_interval	= 30,
-};
-
-static void __init mainstone_init_keypad(void)
-{
-	pxa_set_keypad_info(&mainstone_keypad_info);
-}
-#else
-static inline void mainstone_init_keypad(void) {}
-#endif
-
-static int mst_pcmcia0_irqs[11] = {
-	[0 ... 4] = -1,
-	[5] = MAINSTONE_S0_CD_IRQ,
-	[6 ... 7] = -1,
-	[8] = MAINSTONE_S0_STSCHG_IRQ,
-	[9] = -1,
-	[10] = MAINSTONE_S0_IRQ,
-};
-
-static int mst_pcmcia1_irqs[11] = {
-	[0 ... 4] = -1,
-	[5] = MAINSTONE_S1_CD_IRQ,
-	[6 ... 7] = -1,
-	[8] = MAINSTONE_S1_STSCHG_IRQ,
-	[9] = -1,
-	[10] = MAINSTONE_S1_IRQ,
-};
-
-static struct gpiod_lookup_table mainstone_pcmcia_gpio_table = {
-	.dev_id = "pxa2xx-pcmcia",
-	.table = {
-		GPIO_LOOKUP("mst-pcmcia0",  0, "a0vpp",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia0",  1, "a1vpp",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia0",  2, "a0vcc",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia0",  3, "a1vcc",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia0",  4, "areset",  GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia0",  5, "adetect", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("mst-pcmcia0",  6, "avs1",    GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("mst-pcmcia0",  7, "avs2",    GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("mst-pcmcia0",  8, "abvd1",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia0",  9, "abvd2",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia0", 10, "aready",  GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia1",  0, "b0vpp",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia1",  1, "b1vpp",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia1",  2, "b0vcc",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia1",  3, "b1vcc",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia1",  4, "breset",  GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia1",  5, "bdetect", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("mst-pcmcia1",  6, "bvs1",    GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("mst-pcmcia1",  7, "bvs2",    GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("mst-pcmcia1",  8, "bbvd1",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia1",  9, "bbvd2",   GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("mst-pcmcia1", 10, "bready",  GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table mainstone_wm97xx_gpio_table = {
-	.dev_id = "wm97xx-touch",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", 4, "touch", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static void __init mainstone_init(void)
-{
-	int SW7 = 0;  /* FIXME: get from SCR (Mst doc section 3.2.1.1) */
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(mainstone_pin_config));
-
-	/* Register board control register(s) as GPIOs */
-	gpio_reg_init(NULL, (void __iomem *)&MST_PCMCIA0, -1, 11,
-		      "mst-pcmcia0", MST_PCMCIA_INPUTS, 0, NULL,
-		      NULL, mst_pcmcia0_irqs);
-	gpio_reg_init(NULL, (void __iomem *)&MST_PCMCIA1, -1, 11,
-		      "mst-pcmcia1", MST_PCMCIA_INPUTS, 0, NULL,
-		      NULL, mst_pcmcia1_irqs);
-	gpiod_add_lookup_table(&mainstone_pcmcia_gpio_table);
-	gpiod_add_lookup_table(&mainstone_wm97xx_gpio_table);
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	mst_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
-	mst_flash_data[1].width = 4;
-
-	/* Compensate for SW7 which swaps the flash banks */
-	mst_flash_data[SW7].name = "processor-flash";
-	mst_flash_data[SW7 ^ 1].name = "mainboard-flash";
-
-	printk(KERN_NOTICE "Mainstone configured to boot from %s\n",
-	       mst_flash_data[0].name);
-
-	/* system bus arbiter setting
-	 * - Core_Park
-	 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
-	 */
-	ARB_CNTRL = ARB_CORE_PARK | 0x234;
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-
-	/* reading Mainstone's "Virtual Configuration Register"
-	   might be handy to select LCD type here */
-	if (0)
-		mainstone_pxafb_info.modes = &toshiba_ltm04c380k_mode;
-	else
-		mainstone_pxafb_info.modes = &toshiba_ltm035a776c_mode;
-
-	pxa_set_fb_info(NULL, &mainstone_pxafb_info);
-	mainstone_backlight_register();
-
-	pxa_set_mci_info(&mainstone_mci_platform_data);
-	pxa_set_ficp_info(&mainstone_ficp_platform_data);
-	pxa_set_ohci_info(&mainstone_ohci_platform_data);
-	pxa_set_i2c_info(NULL);
-	pxa_set_ac97_info(&mst_audio_ops);
-
-	mainstone_init_keypad();
-}
-
-
-static struct map_desc mainstone_io_desc[] __initdata = {
-  	{	/* CPLD */
-		.virtual	=  MST_FPGA_VIRT,
-		.pfn		= __phys_to_pfn(MST_FPGA_PHYS),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init mainstone_map_io(void)
-{
-	pxa27x_map_io();
-	iotable_init(mainstone_io_desc, ARRAY_SIZE(mainstone_io_desc));
-
- 	/*	for use I SRAM as framebuffer.	*/
- 	PSLR |= 0xF04;
- 	PCFR = 0x66;
-}
-
-/*
- * Driver for the 8 discrete LEDs available for general use:
- * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
- * so be sure to not monkey with them here.
- */
-
-#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
-struct mainstone_led {
-	struct led_classdev	cdev;
-	u8			mask;
-};
-
-/*
- * The triggers lines up below will only be used if the
- * LED triggers are compiled in.
- */
-static const struct {
-	const char *name;
-	const char *trigger;
-} mainstone_leds[] = {
-	{ "mainstone:D28", "default-on", },
-	{ "mainstone:D27", "cpu0", },
-	{ "mainstone:D26", "heartbeat" },
-	{ "mainstone:D25", },
-	{ "mainstone:D24", },
-	{ "mainstone:D23", },
-	{ "mainstone:D22", },
-	{ "mainstone:D21", },
-};
-
-static void mainstone_led_set(struct led_classdev *cdev,
-			      enum led_brightness b)
-{
-	struct mainstone_led *led = container_of(cdev,
-					 struct mainstone_led, cdev);
-	u32 reg = MST_LEDCTRL;
-
-	if (b != LED_OFF)
-		reg |= led->mask;
-	else
-		reg &= ~led->mask;
-
-	MST_LEDCTRL = reg;
-}
-
-static enum led_brightness mainstone_led_get(struct led_classdev *cdev)
-{
-	struct mainstone_led *led = container_of(cdev,
-					 struct mainstone_led, cdev);
-	u32 reg = MST_LEDCTRL;
-
-	return (reg & led->mask) ? LED_FULL : LED_OFF;
-}
-
-static int __init mainstone_leds_init(void)
-{
-	int i;
-
-	if (!machine_is_mainstone())
-		return -ENODEV;
-
-	/* All ON */
-	MST_LEDCTRL |= 0xff;
-	for (i = 0; i < ARRAY_SIZE(mainstone_leds); i++) {
-		struct mainstone_led *led;
-
-		led = kzalloc(sizeof(*led), GFP_KERNEL);
-		if (!led)
-			break;
-
-		led->cdev.name = mainstone_leds[i].name;
-		led->cdev.brightness_set = mainstone_led_set;
-		led->cdev.brightness_get = mainstone_led_get;
-		led->cdev.default_trigger = mainstone_leds[i].trigger;
-		led->mask = BIT(i);
-
-		if (led_classdev_register(NULL, &led->cdev) < 0) {
-			kfree(led);
-			break;
-		}
-	}
-
-	return 0;
-}
-
-/*
- * Since we may have triggers on any subsystem, defer registration
- * until after subsystem_init.
- */
-fs_initcall(mainstone_leds_init);
-#endif
-
-MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
-	/* Maintainer: MontaVista Software Inc. */
-	.atag_offset	= 0x100,	/* BLOB boot parameter setting */
-	.map_io		= mainstone_map_io,
-	.nr_irqs	= MAINSTONE_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= mainstone_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/mainstone.h b/arch/arm/mach-pxa/mainstone.h
deleted file mode 100644
index f116c56cf5d9..000000000000
--- a/arch/arm/mach-pxa/mainstone.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  Author:	Nicolas Pitre
- *  Created:	Nov 14, 2002
- *  Copyright:	MontaVista Software Inc.
- */
-
-#ifndef ASM_ARCH_MAINSTONE_H
-#define ASM_ARCH_MAINSTONE_H
-
-#include "irqs.h"
-
-#define MST_ETH_PHYS		PXA_CS4_PHYS
-
-#define MST_FPGA_PHYS		PXA_CS2_PHYS
-#define MST_FPGA_VIRT		(0xf0000000)
-#define MST_P2V(x)		((x) - MST_FPGA_PHYS + MST_FPGA_VIRT)
-#define MST_V2P(x)		((x) - MST_FPGA_VIRT + MST_FPGA_PHYS)
-
-#ifndef __ASSEMBLY__
-# define __MST_REG(x)		(*((volatile unsigned long *)MST_P2V(x)))
-#else
-# define __MST_REG(x)		MST_P2V(x)
-#endif
-
-/* board level registers in the FPGA */
-
-#define MST_LEDDAT1		__MST_REG(0x08000010)
-#define MST_LEDDAT2		__MST_REG(0x08000014)
-#define MST_LEDCTRL		__MST_REG(0x08000040)
-#define MST_GPSWR		__MST_REG(0x08000060)
-#define MST_MSCWR1		__MST_REG(0x08000080)
-#define MST_MSCWR2		__MST_REG(0x08000084)
-#define MST_MSCWR3		__MST_REG(0x08000088)
-#define MST_MSCRD		__MST_REG(0x08000090)
-#define MST_INTMSKENA		__MST_REG(0x080000c0)
-#define MST_INTSETCLR		__MST_REG(0x080000d0)
-#define MST_PCMCIA0		__MST_REG(0x080000e0)
-#define MST_PCMCIA1		__MST_REG(0x080000e4)
-
-#define MST_MSCWR1_CAMERA_ON	(1 << 15)  /* Camera interface power control */
-#define MST_MSCWR1_CAMERA_SEL	(1 << 14)  /* Camera interface mux control */
-#define MST_MSCWR1_LCD_CTL	(1 << 13)  /* General-purpose LCD control */
-#define MST_MSCWR1_MS_ON	(1 << 12)  /* Memory Stick power control */
-#define MST_MSCWR1_MMC_ON	(1 << 11)  /* MultiMediaCard* power control */
-#define MST_MSCWR1_MS_SEL	(1 << 10)  /* SD/MS multiplexer control */
-#define MST_MSCWR1_BB_SEL	(1 << 9)   /* PCMCIA/Baseband multiplexer */
-#define MST_MSCWR1_BT_ON	(1 << 8)   /* Bluetooth UART transceiver */
-#define MST_MSCWR1_BTDTR	(1 << 7)   /* Bluetooth UART DTR */
-
-#define MST_MSCWR1_IRDA_MASK	(3 << 5)   /* IrDA transceiver mode */
-#define MST_MSCWR1_IRDA_FULL	(0 << 5)   /* full distance power */
-#define MST_MSCWR1_IRDA_OFF	(1 << 5)   /* shutdown */
-#define MST_MSCWR1_IRDA_MED	(2 << 5)   /* 2/3 distance power */
-#define MST_MSCWR1_IRDA_LOW	(3 << 5)   /* 1/3 distance power */
-
-#define MST_MSCWR1_IRDA_FIR	(1 << 4)   /* IrDA transceiver SIR/FIR */
-#define MST_MSCWR1_GREENLED	(1 << 3)   /* LED D1 control */
-#define MST_MSCWR1_PDC_CTL	(1 << 2)   /* reserved */
-#define MST_MSCWR1_MTR_ON	(1 << 1)   /* Silent alert motor */
-#define MST_MSCWR1_SYSRESET	(1 << 0)   /* System reset */
-
-#define MST_MSCWR2_USB_OTG_RST	(1 << 6)   /* USB On The Go reset */
-#define MST_MSCWR2_USB_OTG_SEL	(1 << 5)   /* USB On The Go control */
-#define MST_MSCWR2_nUSBC_SC	(1 << 4)   /* USB client soft connect control */
-#define MST_MSCWR2_I2S_SPKROFF	(1 << 3)   /* I2S CODEC amplifier control */
-#define MST_MSCWR2_AC97_SPKROFF	(1 << 2)   /* AC97 CODEC amplifier control */
-#define MST_MSCWR2_RADIO_PWR	(1 << 1)   /* Radio module power control */
-#define MST_MSCWR2_RADIO_WAKE	(1 << 0)   /* Radio module wake-up signal */
-
-#define MST_MSCWR3_GPIO_RESET_EN	(1 << 2) /* Enable GPIO Reset */
-#define MST_MSCWR3_GPIO_RESET		(1 << 1) /* Initiate a GPIO Reset */
-#define MST_MSCWR3_COMMS_SW_RESET	(1 << 0) /* Communications Processor Reset Control */
-
-#define MST_MSCRD_nPENIRQ	(1 << 9)   /* ADI7873* nPENIRQ signal */
-#define MST_MSCRD_nMEMSTK_CD	(1 << 8)   /* Memory Stick detection signal */
-#define MST_MSCRD_nMMC_CD	(1 << 7)   /* SD/MMC card detection signal */
-#define MST_MSCRD_nUSIM_CD	(1 << 6)   /* USIM card detection signal */
-#define MST_MSCRD_USB_CBL	(1 << 5)   /* USB client cable status */
-#define MST_MSCRD_TS_BUSY	(1 << 4)   /* ADI7873 busy */
-#define MST_MSCRD_BTDSR		(1 << 3)   /* Bluetooth UART DSR */
-#define MST_MSCRD_BTRI		(1 << 2)   /* Bluetooth UART Ring Indicator */
-#define MST_MSCRD_BTDCD		(1 << 1)   /* Bluetooth UART DCD */
-#define MST_MSCRD_nMMC_WP	(1 << 0)   /* SD/MMC write-protect status */
-
-#define MST_INT_S1_IRQ		(1 << 15)  /* PCMCIA socket 1 IRQ */
-#define MST_INT_S1_STSCHG	(1 << 14)  /* PCMCIA socket 1 status changed */
-#define MST_INT_S1_CD		(1 << 13)  /* PCMCIA socket 1 card detection */
-#define MST_INT_S0_IRQ		(1 << 11)  /* PCMCIA socket 0 IRQ */
-#define MST_INT_S0_STSCHG	(1 << 10)  /* PCMCIA socket 0 status changed */
-#define MST_INT_S0_CD		(1 << 9)   /* PCMCIA socket 0 card detection */
-#define MST_INT_nEXBRD_INT	(1 << 7)   /* Expansion board IRQ */
-#define MST_INT_MSINS		(1 << 6)   /* Memory Stick* detection */
-#define MST_INT_PENIRQ		(1 << 5)   /* ADI7873* touch-screen IRQ */
-#define MST_INT_AC97		(1 << 4)   /* AC'97 CODEC IRQ */
-#define MST_INT_ETHERNET	(1 << 3)   /* Ethernet controller IRQ */
-#define MST_INT_USBC		(1 << 2)   /* USB client cable detection IRQ */
-#define MST_INT_USIM		(1 << 1)   /* USIM card detection IRQ */
-#define MST_INT_MMC		(1 << 0)   /* MMC/SD card detection IRQ */
-
-#define MST_PCMCIA_nIRQ		(1 << 10)  /* IRQ / ready signal */
-#define MST_PCMCIA_nSPKR_BVD2	(1 << 9)   /* VDD sense / digital speaker */
-#define MST_PCMCIA_nSTSCHG_BVD1	(1 << 8)   /* VDD sense / card status changed */
-#define MST_PCMCIA_nVS2		(1 << 7)   /* VSS voltage sense */
-#define MST_PCMCIA_nVS1		(1 << 6)   /* VSS voltage sense */
-#define MST_PCMCIA_nCD		(1 << 5)   /* Card detection signal */
-#define MST_PCMCIA_RESET	(1 << 4)   /* Card reset signal */
-#define MST_PCMCIA_PWR_MASK	(0x000f)   /* MAX1602 power-supply controls */
-
-#define MST_PCMCIA_PWR_VPP_0    0x0	   /* voltage VPP = 0V */
-#define MST_PCMCIA_PWR_VPP_120  0x2 	   /* voltage VPP = 12V*/
-#define MST_PCMCIA_PWR_VPP_VCC  0x1	   /* voltage VPP = VCC */
-#define MST_PCMCIA_PWR_VCC_0    0x0	   /* voltage VCC = 0V */
-#define MST_PCMCIA_PWR_VCC_33   0x8	   /* voltage VCC = 3.3V */
-#define MST_PCMCIA_PWR_VCC_50   0x4	   /* voltage VCC = 5.0V */
-
-#define MST_PCMCIA_INPUTS \
-	(MST_PCMCIA_nIRQ | MST_PCMCIA_nSPKR_BVD2 | MST_PCMCIA_nSTSCHG_BVD1 | \
-	 MST_PCMCIA_nVS2 | MST_PCMCIA_nVS1 | MST_PCMCIA_nCD)
-
-/* board specific IRQs */
-#define MAINSTONE_NR_IRQS	IRQ_BOARD_START
-
-#define MAINSTONE_IRQ(x)	(MAINSTONE_NR_IRQS + (x))
-#define MAINSTONE_MMC_IRQ	MAINSTONE_IRQ(0)
-#define MAINSTONE_USIM_IRQ	MAINSTONE_IRQ(1)
-#define MAINSTONE_USBC_IRQ	MAINSTONE_IRQ(2)
-#define MAINSTONE_ETHERNET_IRQ	MAINSTONE_IRQ(3)
-#define MAINSTONE_AC97_IRQ	MAINSTONE_IRQ(4)
-#define MAINSTONE_PEN_IRQ	MAINSTONE_IRQ(5)
-#define MAINSTONE_MSINS_IRQ	MAINSTONE_IRQ(6)
-#define MAINSTONE_EXBRD_IRQ	MAINSTONE_IRQ(7)
-#define MAINSTONE_S0_CD_IRQ	MAINSTONE_IRQ(9)
-#define MAINSTONE_S0_STSCHG_IRQ	MAINSTONE_IRQ(10)
-#define MAINSTONE_S0_IRQ	MAINSTONE_IRQ(11)
-#define MAINSTONE_S1_CD_IRQ	MAINSTONE_IRQ(13)
-#define MAINSTONE_S1_STSCHG_IRQ	MAINSTONE_IRQ(14)
-#define MAINSTONE_S1_IRQ	MAINSTONE_IRQ(15)
-
-#endif
diff --git a/arch/arm/mach-pxa/mfp-pxa25x.h b/arch/arm/mach-pxa/mfp-pxa25x.h
index d0ebb2154503..3dc5c833e28f 100644
--- a/arch/arm/mach-pxa/mfp-pxa25x.h
+++ b/arch/arm/mach-pxa/mfp-pxa25x.h
@@ -158,39 +158,6 @@
 #define GPIO76_LCD_PCLK		MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
 #define GPIO77_LCD_BIAS		MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
 
-#ifdef CONFIG_CPU_PXA26x
-/* GPIO */
-#define GPIO85_GPIO		MFP_CFG_IN(GPIO85, AF0)
-#define GPIO86_GPIO		MFP_CFG_IN(GPIO86, AF1)
-#define GPIO87_GPIO		MFP_CFG_IN(GPIO87, AF1)
-#define GPIO88_GPIO		MFP_CFG_IN(GPIO88, AF1)
-#define GPIO89_GPIO		MFP_CFG_IN(GPIO89, AF1)
-
-/* SDRAM */
-#define GPIO86_nSDCS2		MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH)
-#define GPIO87_nSDCS3		MFP_CFG_OUT(GPIO87, AF0, DRIVE_HIGH)
-#define GPIO88_RDnWR		MFP_CFG_OUT(GPIO88, AF0, DRIVE_HIGH)
-
-/* USB */
-#define GPIO9_USB_RCV		MFP_CFG_IN(GPIO9, AF1)
-#define GPIO32_USB_VP		MFP_CFG_IN(GPIO32, AF2)
-#define GPIO34_USB_VM		MFP_CFG_IN(GPIO34, AF2)
-#define GPIO39_USB_VPO		MFP_CFG_OUT(GPIO39, AF3, DRIVE_LOW)
-#define GPIO56_USB_VMO		MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW)
-#define GPIO57_USB_nOE		MFP_CFG_OUT(GPIO57, AF1, DRIVE_HIGH)
-
-/* ASSP */
-#define GPIO28_ASSP_BITCLK_IN	MFP_CFG_IN(GPIO28, AF3)
-#define GPIO28_ASSP_BITCLK_OUT	MFP_CFG_OUT(GPIO28, AF3, DRIVE_LOW)
-#define GPIO29_ASSP_RXD		MFP_CFG_IN(GPIO29, AF3)
-#define GPIO30_ASSP_TXD		MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
-#define GPIO31_ASSP_SFRM_IN	MFP_CFG_IN(GPIO31, AF1)
-#define GPIO31_ASSP_SFRM_OUT	MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
-
-/* AC97 */
-#define GPIO89_AC97_nRESET	MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH)
-#endif	/* CONFIG_CPU_PXA26x */
-
 /* commonly used pin configurations */
 #define GPIOxx_LCD_16BPP	\
 	GPIO58_LCD_LDD_0,	\
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 57b0782880de..b556452dfcf9 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -226,11 +226,7 @@ static void __init pxa25x_mfp_init(void)
 	int i;
 
 	/* running before pxa_gpio_probe() */
-#ifdef CONFIG_CPU_PXA26x
-	pxa_last_gpio = 89;
-#else
 	pxa_last_gpio = 84;
-#endif
 	for (i = 0; i <= pxa_last_gpio; i++)
 		gpio_desc[i].valid = 1;
 
diff --git a/arch/arm/mach-pxa/mfp-pxa930.h b/arch/arm/mach-pxa/mfp-pxa930.h
deleted file mode 100644
index 0d195d3a8c61..000000000000
--- a/arch/arm/mach-pxa/mfp-pxa930.h
+++ /dev/null
@@ -1,495 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-pxa/include/mach/mfp-pxa930.h
- *
- * PXA930 specific MFP configuration definitions
- *
- * Copyright (C) 2007-2008 Marvell International Ltd.
- */
-
-#ifndef __ASM_ARCH_MFP_PXA9xx_H
-#define __ASM_ARCH_MFP_PXA9xx_H
-
-#include "mfp-pxa3xx.h"
-
-/* GPIO */
-#define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
-#define GPIO49_GPIO		MFP_CFG(GPIO49, AF0)
-#define GPIO50_GPIO		MFP_CFG(GPIO50, AF0)
-#define GPIO51_GPIO		MFP_CFG(GPIO51, AF0)
-#define GPIO52_GPIO		MFP_CFG(GPIO52, AF0)
-#define GPIO56_GPIO		MFP_CFG(GPIO56, AF0)
-#define GPIO58_GPIO		MFP_CFG(GPIO58, AF0)
-#define GPIO59_GPIO		MFP_CFG(GPIO59, AF0)
-#define GPIO60_GPIO		MFP_CFG(GPIO60, AF0)
-#define GPIO61_GPIO		MFP_CFG(GPIO61, AF0)
-#define GPIO62_GPIO		MFP_CFG(GPIO62, AF0)
-
-#define GSIM_UCLK_GPIO_79	MFP_CFG(GSIM_UCLK, AF0)
-#define GSIM_UIO_GPIO_80	MFP_CFG(GSIM_UIO, AF0)
-#define GSIM_nURST_GPIO_81	MFP_CFG(GSIM_nURST, AF0)
-#define GSIM_UDET_GPIO_82	MFP_CFG(GSIM_UDET, AF0)
-
-#define DF_IO15_GPIO_28		MFP_CFG(DF_IO15, AF0)
-#define DF_IO14_GPIO_29		MFP_CFG(DF_IO14, AF0)
-#define DF_IO13_GPIO_30		MFP_CFG(DF_IO13, AF0)
-#define DF_IO12_GPIO_31		MFP_CFG(DF_IO12, AF0)
-#define DF_IO11_GPIO_32		MFP_CFG(DF_IO11, AF0)
-#define DF_IO10_GPIO_33		MFP_CFG(DF_IO10, AF0)
-#define DF_IO9_GPIO_34		MFP_CFG(DF_IO9, AF0)
-#define DF_IO8_GPIO_35		MFP_CFG(DF_IO8, AF0)
-#define DF_IO7_GPIO_36		MFP_CFG(DF_IO7, AF0)
-#define DF_IO6_GPIO_37		MFP_CFG(DF_IO6, AF0)
-#define DF_IO5_GPIO_38		MFP_CFG(DF_IO5, AF0)
-#define DF_IO4_GPIO_39		MFP_CFG(DF_IO4, AF0)
-#define DF_IO3_GPIO_40		MFP_CFG(DF_IO3, AF0)
-#define DF_IO2_GPIO_41		MFP_CFG(DF_IO2, AF0)
-#define DF_IO1_GPIO_42		MFP_CFG(DF_IO1, AF0)
-#define DF_IO0_GPIO_43		MFP_CFG(DF_IO0, AF0)
-#define DF_nCS0_GPIO_44		MFP_CFG(DF_nCS0, AF0)
-#define DF_nCS1_GPIO_45		MFP_CFG(DF_nCS1, AF0)
-#define DF_nWE_GPIO_46		MFP_CFG(DF_nWE, AF0)
-#define DF_nRE_nOE_GPIO_47	MFP_CFG(DF_nRE_nOE, AF0)
-#define DF_CLE_nOE_GPIO_48	MFP_CFG(DF_CLE_nOE, AF0)
-#define DF_nADV1_ALE_GPIO_49	MFP_CFG(DF_nADV1_ALE, AF0)
-#define DF_nADV2_ALE_GPIO_50	MFP_CFG(DF_nADV2_ALE, AF0)
-#define DF_INT_RnB_GPIO_51	MFP_CFG(DF_INT_RnB, AF0)
-#define DF_SCLK_E_GPIO_52	MFP_CFG(DF_SCLK_E, AF0)
-
-#define DF_ADDR0_GPIO_53	MFP_CFG(DF_ADDR0, AF0)
-#define DF_ADDR1_GPIO_54	MFP_CFG(DF_ADDR1, AF0)
-#define DF_ADDR2_GPIO_55	MFP_CFG(DF_ADDR2, AF0)
-#define DF_ADDR3_GPIO_56	MFP_CFG(DF_ADDR3, AF0)
-#define nXCVREN_GPIO_57		MFP_CFG(nXCVREN, AF0)
-#define nLUA_GPIO_58		MFP_CFG(nLUA, AF0)
-#define nLLA_GPIO_59		MFP_CFG(nLLA, AF0)
-#define nBE0_GPIO_60		MFP_CFG(nBE0, AF0)
-#define nBE1_GPIO_61		MFP_CFG(nBE1, AF0)
-#define RDY_GPIO_62		MFP_CFG(RDY, AF0)
-#define PMIC_INT_GPIO83		MFP_CFG_LPM(PMIC_INT, AF0, PULL_HIGH)
-
-/* Chip Select */
-#define DF_nCS0_nCS2		MFP_CFG_LPM(DF_nCS0, AF3, PULL_HIGH)
-#define DF_nCS1_nCS3		MFP_CFG_LPM(DF_nCS1, AF3, PULL_HIGH)
-
-/* AC97 */
-#define GPIO83_BAC97_SYSCLK	MFP_CFG(GPIO83, AF3)
-#define GPIO84_BAC97_SDATA_IN0	MFP_CFG(GPIO84, AF3)
-#define GPIO85_BAC97_BITCLK	MFP_CFG(GPIO85, AF3)
-#define GPIO86_BAC97_nRESET	MFP_CFG(GPIO86, AF3)
-#define GPIO87_BAC97_SYNC	MFP_CFG(GPIO87, AF3)
-#define GPIO88_BAC97_SDATA_OUT	MFP_CFG(GPIO88, AF3)
-
-/* I2C */
-#define GPIO39_CI2C_SCL		MFP_CFG_LPM(GPIO39, AF3, PULL_HIGH)
-#define GPIO40_CI2C_SDA		MFP_CFG_LPM(GPIO40, AF3, PULL_HIGH)
-
-#define GPIO51_CI2C_SCL		MFP_CFG_LPM(GPIO51, AF3, PULL_HIGH)
-#define GPIO52_CI2C_SDA		MFP_CFG_LPM(GPIO52, AF3, PULL_HIGH)
-
-#define GPIO63_CI2C_SCL		MFP_CFG_LPM(GPIO63, AF4, PULL_HIGH)
-#define GPIO64_CI2C_SDA		MFP_CFG_LPM(GPIO64, AF4, PULL_HIGH)
-
-#define GPIO73_CI2C_SCL		MFP_CFG_LPM(GPIO73, AF1, PULL_HIGH)
-#define GPIO74_CI2C_SDA		MFP_CFG_LPM(GPIO74, AF1, PULL_HIGH)
-
-#define GPIO77_CI2C_SCL		MFP_CFG_LPM(GPIO77, AF2, PULL_HIGH)
-#define GPIO78_CI2C_SDA		MFP_CFG_LPM(GPIO78, AF2, PULL_HIGH)
-
-#define GPIO89_CI2C_SCL		MFP_CFG_LPM(GPIO89, AF1, PULL_HIGH)
-#define GPIO90_CI2C_SDA		MFP_CFG_LPM(GPIO90, AF1, PULL_HIGH)
-
-#define GPIO95_CI2C_SCL		MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
-#define GPIO96_CI2C_SDA		MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
-
-#define GPIO97_CI2C_SCL		MFP_CFG_LPM(GPIO97, AF3, PULL_HIGH)
-#define GPIO98_CI2C_SDA		MFP_CFG_LPM(GPIO98, AF3, PULL_HIGH)
-
-/* QCI */
-#define GPIO63_CI_DD_9		MFP_CFG_LPM(GPIO63, AF1, PULL_LOW)
-#define GPIO64_CI_DD_8		MFP_CFG_LPM(GPIO64, AF1, PULL_LOW)
-#define GPIO65_CI_DD_7		MFP_CFG_LPM(GPIO65, AF1, PULL_LOW)
-#define GPIO66_CI_DD_6		MFP_CFG_LPM(GPIO66, AF1, PULL_LOW)
-#define GPIO67_CI_DD_5		MFP_CFG_LPM(GPIO67, AF1, PULL_LOW)
-#define GPIO68_CI_DD_4		MFP_CFG_LPM(GPIO68, AF1, PULL_LOW)
-#define GPIO69_CI_DD_3		MFP_CFG_LPM(GPIO69, AF1, PULL_LOW)
-#define GPIO70_CI_DD_2		MFP_CFG_LPM(GPIO70, AF1, PULL_LOW)
-#define GPIO71_CI_DD_1		MFP_CFG_LPM(GPIO71, AF1, PULL_LOW)
-#define GPIO72_CI_DD_0		MFP_CFG_LPM(GPIO72, AF1, PULL_LOW)
-#define GPIO73_CI_HSYNC		MFP_CFG_LPM(GPIO73, AF1, PULL_LOW)
-#define GPIO74_CI_VSYNC		MFP_CFG_LPM(GPIO74, AF1, PULL_LOW)
-#define GPIO75_CI_MCLK		MFP_CFG_LPM(GPIO75, AF1, PULL_LOW)
-#define GPIO76_CI_PCLK		MFP_CFG_LPM(GPIO76, AF1, PULL_LOW)
-
-/* KEYPAD */
-#define GPIO4_KP_DKIN_4		MFP_CFG_LPM(GPIO4, AF3, FLOAT)
-#define GPIO5_KP_DKIN_5		MFP_CFG_LPM(GPIO5, AF3, FLOAT)
-#define GPIO6_KP_DKIN_6		MFP_CFG_LPM(GPIO6, AF3, FLOAT)
-#define GPIO7_KP_DKIN_7		MFP_CFG_LPM(GPIO7, AF3, FLOAT)
-#define GPIO8_KP_DKIN_4		MFP_CFG_LPM(GPIO8, AF3, FLOAT)
-#define GPIO9_KP_DKIN_5		MFP_CFG_LPM(GPIO9, AF3, FLOAT)
-#define GPIO10_KP_DKIN_6	MFP_CFG_LPM(GPIO10, AF3, FLOAT)
-#define GPIO11_KP_DKIN_7	MFP_CFG_LPM(GPIO11, AF3, FLOAT)
-
-#define GPIO12_KP_DKIN_0	MFP_CFG_LPM(GPIO12, AF2, FLOAT)
-#define GPIO13_KP_DKIN_1	MFP_CFG_LPM(GPIO13, AF2, FLOAT)
-#define GPIO14_KP_DKIN_2	MFP_CFG_LPM(GPIO14, AF2, FLOAT)
-#define GPIO15_KP_DKIN_3	MFP_CFG_LPM(GPIO15, AF2, FLOAT)
-
-#define GPIO41_KP_DKIN_0	MFP_CFG_LPM(GPIO41, AF2, FLOAT)
-#define GPIO42_KP_DKIN_1	MFP_CFG_LPM(GPIO42, AF2, FLOAT)
-#define GPIO43_KP_DKIN_2	MFP_CFG_LPM(GPIO43, AF2, FLOAT)
-#define GPIO44_KP_DKIN_3	MFP_CFG_LPM(GPIO44, AF2, FLOAT)
-#define GPIO41_KP_DKIN_4	MFP_CFG_LPM(GPIO41, AF4, FLOAT)
-#define GPIO42_KP_DKIN_5	MFP_CFG_LPM(GPIO42, AF4, FLOAT)
-
-#define GPIO0_KP_MKIN_0		MFP_CFG_LPM(GPIO0, AF1, FLOAT)
-#define GPIO2_KP_MKIN_1		MFP_CFG_LPM(GPIO2, AF1, FLOAT)
-#define GPIO4_KP_MKIN_2		MFP_CFG_LPM(GPIO4, AF1, FLOAT)
-#define GPIO6_KP_MKIN_3		MFP_CFG_LPM(GPIO6, AF1, FLOAT)
-#define GPIO8_KP_MKIN_4		MFP_CFG_LPM(GPIO8, AF1, FLOAT)
-#define GPIO10_KP_MKIN_5	MFP_CFG_LPM(GPIO10, AF1, FLOAT)
-#define GPIO12_KP_MKIN_6	MFP_CFG_LPM(GPIO12, AF1, FLOAT)
-#define GPIO14_KP_MKIN_7	MFP_CFG(GPIO14, AF1)
-#define GPIO35_KP_MKIN_5	MFP_CFG(GPIO35, AF4)
-
-#define GPIO1_KP_MKOUT_0	MFP_CFG_LPM(GPIO1, AF1, DRIVE_HIGH)
-#define GPIO3_KP_MKOUT_1	MFP_CFG_LPM(GPIO3, AF1, DRIVE_HIGH)
-#define GPIO5_KP_MKOUT_2	MFP_CFG_LPM(GPIO5, AF1, DRIVE_HIGH)
-#define GPIO7_KP_MKOUT_3	MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH)
-#define GPIO9_KP_MKOUT_4	MFP_CFG_LPM(GPIO9, AF1, DRIVE_HIGH)
-#define GPIO11_KP_MKOUT_5	MFP_CFG_LPM(GPIO11, AF1, DRIVE_HIGH)
-#define GPIO13_KP_MKOUT_6	MFP_CFG_LPM(GPIO13, AF1, DRIVE_HIGH)
-#define GPIO15_KP_MKOUT_7	MFP_CFG_LPM(GPIO15, AF1, DRIVE_HIGH)
-#define GPIO36_KP_MKOUT_5	MFP_CFG_LPM(GPIO36, AF4, DRIVE_HIGH)
-
-/* LCD */
-#define GPIO17_LCD_FCLK_RD	MFP_CFG(GPIO17, AF1)
-#define GPIO18_LCD_LCLK_A0	MFP_CFG(GPIO18, AF1)
-#define GPIO19_LCD_PCLK_WR	MFP_CFG(GPIO19, AF1)
-#define GPIO20_LCD_BIAS		MFP_CFG(GPIO20, AF1)
-#define GPIO21_LCD_CS		MFP_CFG(GPIO21, AF1)
-#define GPIO22_LCD_CS2		MFP_CFG(GPIO22, AF2)
-#define GPIO22_LCD_VSYNC	MFP_CFG(GPIO22, AF1)
-#define GPIO23_LCD_DD0		MFP_CFG(GPIO23, AF1)
-#define GPIO24_LCD_DD1		MFP_CFG(GPIO24, AF1)
-#define GPIO25_LCD_DD2		MFP_CFG(GPIO25, AF1)
-#define GPIO26_LCD_DD3		MFP_CFG(GPIO26, AF1)
-#define GPIO27_LCD_DD4		MFP_CFG(GPIO27, AF1)
-#define GPIO28_LCD_DD5		MFP_CFG(GPIO28, AF1)
-#define GPIO29_LCD_DD6		MFP_CFG(GPIO29, AF1)
-#define GPIO30_LCD_DD7		MFP_CFG(GPIO30, AF1)
-#define GPIO31_LCD_DD8		MFP_CFG(GPIO31, AF1)
-#define GPIO32_LCD_DD9		MFP_CFG(GPIO32, AF1)
-#define GPIO33_LCD_DD10		MFP_CFG(GPIO33, AF1)
-#define GPIO34_LCD_DD11		MFP_CFG(GPIO34, AF1)
-#define GPIO35_LCD_DD12		MFP_CFG(GPIO35, AF1)
-#define GPIO36_LCD_DD13		MFP_CFG(GPIO36, AF1)
-#define GPIO37_LCD_DD14		MFP_CFG(GPIO37, AF1)
-#define GPIO38_LCD_DD15		MFP_CFG(GPIO38, AF1)
-#define GPIO39_LCD_DD16		MFP_CFG(GPIO39, AF1)
-#define GPIO40_LCD_DD17		MFP_CFG(GPIO40, AF1)
-#define GPIO41_LCD_CS2		MFP_CFG(GPIO41, AF3)
-#define GPIO42_LCD_VSYNC2	MFP_CFG(GPIO42, AF3)
-#define GPIO44_LCD_DD7		MFP_CFG(GPIO44, AF1)
-
-/* Mini-LCD */
-#define GPIO17_MLCD_FCLK	MFP_CFG(GPIO17, AF3)
-#define GPIO18_MLCD_LCLK	MFP_CFG(GPIO18, AF3)
-#define GPIO19_MLCD_PCLK	MFP_CFG(GPIO19, AF3)
-#define GPIO20_MLCD_BIAS	MFP_CFG(GPIO20, AF3)
-#define GPIO23_MLCD_DD0		MFP_CFG(GPIO23, AF3)
-#define GPIO24_MLCD_DD1		MFP_CFG(GPIO24, AF3)
-#define GPIO25_MLCD_DD2		MFP_CFG(GPIO25, AF3)
-#define GPIO26_MLCD_DD3		MFP_CFG(GPIO26, AF3)
-#define GPIO27_MLCD_DD4		MFP_CFG(GPIO27, AF3)
-#define GPIO28_MLCD_DD5		MFP_CFG(GPIO28, AF3)
-#define GPIO29_MLCD_DD6		MFP_CFG(GPIO29, AF3)
-#define GPIO30_MLCD_DD7		MFP_CFG(GPIO30, AF3)
-#define GPIO31_MLCD_DD8		MFP_CFG(GPIO31, AF3)
-#define GPIO32_MLCD_DD9		MFP_CFG(GPIO32, AF3)
-#define GPIO33_MLCD_DD10	MFP_CFG(GPIO33, AF3)
-#define GPIO34_MLCD_DD11	MFP_CFG(GPIO34, AF3)
-#define GPIO35_MLCD_DD12	MFP_CFG(GPIO35, AF3)
-#define GPIO36_MLCD_DD13	MFP_CFG(GPIO36, AF3)
-#define GPIO37_MLCD_DD14	MFP_CFG(GPIO37, AF3)
-#define GPIO38_MLCD_DD15	MFP_CFG(GPIO38, AF3)
-#define GPIO44_MLCD_DD7		MFP_CFG(GPIO44, AF5)
-
-/* MMC1 */
-#define GPIO10_MMC1_DAT3	MFP_CFG(GPIO10, AF4)
-#define GPIO11_MMC1_DAT2	MFP_CFG(GPIO11, AF4)
-#define GPIO12_MMC1_DAT1	MFP_CFG(GPIO12, AF4)
-#define GPIO13_MMC1_DAT0	MFP_CFG(GPIO13, AF4)
-#define GPIO14_MMC1_CMD		MFP_CFG(GPIO14, AF4)
-#define GPIO15_MMC1_CLK		MFP_CFG(GPIO15, AF4)
-#define GPIO55_MMC1_CMD		MFP_CFG(GPIO55, AF3)
-#define GPIO56_MMC1_CLK		MFP_CFG(GPIO56, AF3)
-#define GPIO57_MMC1_DAT0	MFP_CFG(GPIO57, AF3)
-#define GPIO58_MMC1_DAT1	MFP_CFG(GPIO58, AF3)
-#define GPIO59_MMC1_DAT2	MFP_CFG(GPIO59, AF3)
-#define GPIO60_MMC1_DAT3	MFP_CFG(GPIO60, AF3)
-
-#define DF_ADDR0_MMC1_CLK	MFP_CFG(DF_ADDR0, AF2)
-#define DF_ADDR1_MMC1_CMD	MFP_CFG(DF_ADDR1, AF2)
-#define DF_ADDR2_MMC1_DAT0	MFP_CFG(DF_ADDR2, AF2)
-#define DF_ADDR3_MMC1_DAT1	MFP_CFG(DF_ADDR3, AF3)
-#define nXCVREN_MMC1_DAT2	MFP_CFG(nXCVREN, AF2)
-
-/* MMC2 */
-#define GPIO31_MMC2_CMD		MFP_CFG(GPIO31, AF7)
-#define GPIO32_MMC2_CLK		MFP_CFG(GPIO32, AF7)
-#define GPIO33_MMC2_DAT0	MFP_CFG(GPIO33, AF7)
-#define GPIO34_MMC2_DAT1	MFP_CFG(GPIO34, AF7)
-#define GPIO35_MMC2_DAT2	MFP_CFG(GPIO35, AF7)
-#define GPIO36_MMC2_DAT3	MFP_CFG(GPIO36, AF7)
-
-#define GPIO101_MMC2_DAT3	MFP_CFG(GPIO101, AF1)
-#define GPIO102_MMC2_DAT2	MFP_CFG(GPIO102, AF1)
-#define GPIO103_MMC2_DAT1	MFP_CFG(GPIO103, AF1)
-#define GPIO104_MMC2_DAT0	MFP_CFG(GPIO104, AF1)
-#define GPIO105_MMC2_CMD	MFP_CFG(GPIO105, AF1)
-#define GPIO106_MMC2_CLK	MFP_CFG(GPIO106, AF1)
-
-#define DF_IO10_MMC2_DAT3	MFP_CFG(DF_IO10, AF3)
-#define DF_IO11_MMC2_DAT2	MFP_CFG(DF_IO11, AF3)
-#define DF_IO12_MMC2_DAT1	MFP_CFG(DF_IO12, AF3)
-#define DF_IO13_MMC2_DAT0	MFP_CFG(DF_IO13, AF3)
-#define DF_IO14_MMC2_CLK	MFP_CFG(DF_IO14, AF3)
-#define DF_IO15_MMC2_CMD	MFP_CFG(DF_IO15, AF3)
-
-/* BSSP1 */
-#define GPIO12_BSSP1_CLK	MFP_CFG(GPIO12, AF3)
-#define GPIO13_BSSP1_FRM	MFP_CFG(GPIO13, AF3)
-#define GPIO14_BSSP1_RXD	MFP_CFG(GPIO14, AF3)
-#define GPIO15_BSSP1_TXD	MFP_CFG(GPIO15, AF3)
-#define GPIO97_BSSP1_CLK	MFP_CFG(GPIO97, AF5)
-#define GPIO98_BSSP1_FRM	MFP_CFG(GPIO98, AF5)
-
-/* BSSP2 */
-#define GPIO84_BSSP2_SDATA_IN	MFP_CFG(GPIO84, AF1)
-#define GPIO85_BSSP2_BITCLK	MFP_CFG(GPIO85, AF1)
-#define GPIO86_BSSP2_SYSCLK	MFP_CFG(GPIO86, AF1)
-#define GPIO87_BSSP2_SYNC	MFP_CFG(GPIO87, AF1)
-#define GPIO88_BSSP2_DATA_OUT	MFP_CFG(GPIO88, AF1)
-#define GPIO86_BSSP2_SDATA_IN	MFP_CFG(GPIO86, AF4)
-
-/* BSSP3 */
-#define GPIO79_BSSP3_CLK	MFP_CFG(GPIO79, AF1)
-#define GPIO80_BSSP3_FRM	MFP_CFG(GPIO80, AF1)
-#define GPIO81_BSSP3_TXD	MFP_CFG(GPIO81, AF1)
-#define GPIO82_BSSP3_RXD	MFP_CFG(GPIO82, AF1)
-#define GPIO83_BSSP3_SYSCLK	MFP_CFG(GPIO83, AF1)
-
-/* BSSP4 */
-#define GPIO43_BSSP4_CLK	MFP_CFG(GPIO43, AF4)
-#define GPIO44_BSSP4_FRM	MFP_CFG(GPIO44, AF4)
-#define GPIO45_BSSP4_TXD	MFP_CFG(GPIO45, AF4)
-#define GPIO46_BSSP4_RXD	MFP_CFG(GPIO46, AF4)
-
-#define GPIO51_BSSP4_CLK	MFP_CFG(GPIO51, AF4)
-#define GPIO52_BSSP4_FRM	MFP_CFG(GPIO52, AF4)
-#define GPIO53_BSSP4_TXD	MFP_CFG(GPIO53, AF4)
-#define GPIO54_BSSP4_RXD	MFP_CFG(GPIO54, AF4)
-
-/* GSSP1 */
-#define GPIO79_GSSP1_CLK	MFP_CFG(GPIO79, AF2)
-#define GPIO80_GSSP1_FRM	MFP_CFG(GPIO80, AF2)
-#define GPIO81_GSSP1_TXD	MFP_CFG(GPIO81, AF2)
-#define GPIO82_GSSP1_RXD	MFP_CFG(GPIO82, AF2)
-#define GPIO83_GSSP1_SYSCLK	MFP_CFG(GPIO83, AF2)
-
-#define GPIO93_GSSP1_CLK	MFP_CFG(GPIO93, AF4)
-#define GPIO94_GSSP1_FRM	MFP_CFG(GPIO94, AF4)
-#define GPIO95_GSSP1_TXD	MFP_CFG(GPIO95, AF4)
-#define GPIO96_GSSP1_RXD	MFP_CFG(GPIO96, AF4)
-
-/* GSSP2 */
-#define GPIO47_GSSP2_CLK	MFP_CFG(GPIO47, AF4)
-#define GPIO48_GSSP2_FRM	MFP_CFG(GPIO48, AF4)
-#define GPIO49_GSSP2_RXD	MFP_CFG(GPIO49, AF4)
-#define GPIO50_GSSP2_TXD	MFP_CFG(GPIO50, AF4)
-
-#define GPIO69_GSSP2_CLK	MFP_CFG(GPIO69, AF4)
-#define GPIO70_GSSP2_FRM	MFP_CFG(GPIO70, AF4)
-#define GPIO71_GSSP2_RXD	MFP_CFG(GPIO71, AF4)
-#define GPIO72_GSSP2_TXD	MFP_CFG(GPIO72, AF4)
-
-#define GPIO84_GSSP2_RXD	MFP_CFG(GPIO84, AF2)
-#define GPIO85_GSSP2_CLK	MFP_CFG(GPIO85, AF2)
-#define GPIO86_GSSP2_SYSCLK	MFP_CFG(GPIO86, AF2)
-#define GPIO87_GSSP2_FRM	MFP_CFG(GPIO87, AF2)
-#define GPIO88_GSSP2_TXD	MFP_CFG(GPIO88, AF2)
-#define GPIO86_GSSP2_RXD	MFP_CFG(GPIO86, AF5)
-
-#define GPIO103_GSSP2_CLK	MFP_CFG(GPIO103, AF2)
-#define GPIO104_GSSP2_FRM	MFP_CFG(GPIO104, AF2)
-#define GPIO105_GSSP2_RXD	MFP_CFG(GPIO105, AF2)
-#define GPIO106_GSSP2_TXD	MFP_CFG(GPIO106, AF2)
-
-/* UART1 - FFUART */
-#define GPIO47_UART1_DSR_N	MFP_CFG(GPIO47, AF1)
-#define GPIO48_UART1_DTR_N	MFP_CFG(GPIO48, AF1)
-#define GPIO49_UART1_RI		MFP_CFG(GPIO49, AF1)
-#define GPIO50_UART1_DCD	MFP_CFG(GPIO50, AF1)
-#define GPIO51_UART1_CTS	MFP_CFG(GPIO51, AF1)
-#define GPIO52_UART1_RTS	MFP_CFG(GPIO52, AF1)
-#define GPIO53_UART1_RXD	MFP_CFG(GPIO53, AF1)
-#define GPIO54_UART1_TXD	MFP_CFG(GPIO54, AF1)
-
-#define GPIO63_UART1_TXD	MFP_CFG(GPIO63, AF2)
-#define GPIO64_UART1_RXD	MFP_CFG(GPIO64, AF2)
-#define GPIO65_UART1_DSR	MFP_CFG(GPIO65, AF2)
-#define GPIO66_UART1_DTR	MFP_CFG(GPIO66, AF2)
-#define GPIO67_UART1_RI		MFP_CFG(GPIO67, AF2)
-#define GPIO68_UART1_DCD	MFP_CFG(GPIO68, AF2)
-#define GPIO69_UART1_CTS	MFP_CFG(GPIO69, AF2)
-#define GPIO70_UART1_RTS	MFP_CFG(GPIO70, AF2)
-
-#define GPIO53_UART1_TXD	MFP_CFG(GPIO53, AF2)
-#define GPIO54_UART1_RXD	MFP_CFG(GPIO54, AF2)
-
-/* UART2 - BTUART */
-#define GPIO91_UART2_RXD	MFP_CFG(GPIO91, AF1)
-#define GPIO92_UART2_TXD	MFP_CFG(GPIO92, AF1)
-#define GPIO93_UART2_CTS	MFP_CFG(GPIO93, AF1)
-#define GPIO94_UART2_RTS	MFP_CFG(GPIO94, AF1)
-
-/* UART3 - STUART */
-#define GPIO43_UART3_RTS	MFP_CFG(GPIO43, AF3)
-#define GPIO44_UART3_CTS	MFP_CFG(GPIO44, AF3)
-#define GPIO45_UART3_RXD	MFP_CFG(GPIO45, AF3)
-#define GPIO46_UART3_TXD	MFP_CFG(GPIO46, AF3)
-
-#define GPIO75_UART3_RTS	MFP_CFG(GPIO75, AF5)
-#define GPIO76_UART3_CTS	MFP_CFG(GPIO76, AF5)
-#define GPIO77_UART3_TXD	MFP_CFG(GPIO77, AF5)
-#define GPIO78_UART3_RXD	MFP_CFG(GPIO78, AF5)
-
-/* DFI */
-#define DF_IO0_DF_IO0		MFP_CFG(DF_IO0, AF2)
-#define DF_IO1_DF_IO1		MFP_CFG(DF_IO1, AF2)
-#define DF_IO2_DF_IO2		MFP_CFG(DF_IO2, AF2)
-#define DF_IO3_DF_IO3		MFP_CFG(DF_IO3, AF2)
-#define DF_IO4_DF_IO4		MFP_CFG(DF_IO4, AF2)
-#define DF_IO5_DF_IO5		MFP_CFG(DF_IO5, AF2)
-#define DF_IO6_DF_IO6		MFP_CFG(DF_IO6, AF2)
-#define DF_IO7_DF_IO7		MFP_CFG(DF_IO7, AF2)
-#define DF_IO8_DF_IO8		MFP_CFG(DF_IO8, AF2)
-#define DF_IO9_DF_IO9		MFP_CFG(DF_IO9, AF2)
-#define DF_IO10_DF_IO10		MFP_CFG(DF_IO10, AF2)
-#define DF_IO11_DF_IO11		MFP_CFG(DF_IO11, AF2)
-#define DF_IO12_DF_IO12		MFP_CFG(DF_IO12, AF2)
-#define DF_IO13_DF_IO13		MFP_CFG(DF_IO13, AF2)
-#define DF_IO14_DF_IO14		MFP_CFG(DF_IO14, AF2)
-#define DF_IO15_DF_IO15		MFP_CFG(DF_IO15, AF2)
-#define DF_nADV1_ALE_DF_nADV1	MFP_CFG(DF_nADV1_ALE, AF2)
-#define DF_nADV2_ALE_DF_nADV2	MFP_CFG(DF_nADV2_ALE, AF2)
-#define DF_nCS0_DF_nCS0		MFP_CFG(DF_nCS0, AF2)
-#define DF_nCS1_DF_nCS1		MFP_CFG(DF_nCS1, AF2)
-#define DF_nRE_nOE_DF_nOE	MFP_CFG(DF_nRE_nOE, AF2)
-#define DF_nWE_DF_nWE		MFP_CFG(DF_nWE, AF2)
-
-/* DFI - NAND */
-#define DF_CLE_nOE_ND_CLE	MFP_CFG_LPM(DF_CLE_nOE, AF1, PULL_HIGH)
-#define DF_INT_RnB_ND_INT_RnB	MFP_CFG_LPM(DF_INT_RnB, AF1, PULL_LOW)
-#define DF_IO0_ND_IO0		MFP_CFG_LPM(DF_IO0, AF1, PULL_LOW)
-#define DF_IO1_ND_IO1		MFP_CFG_LPM(DF_IO1, AF1, PULL_LOW)
-#define DF_IO2_ND_IO2		MFP_CFG_LPM(DF_IO2, AF1, PULL_LOW)
-#define DF_IO3_ND_IO3		MFP_CFG_LPM(DF_IO3, AF1, PULL_LOW)
-#define DF_IO4_ND_IO4		MFP_CFG_LPM(DF_IO4, AF1, PULL_LOW)
-#define DF_IO5_ND_IO5		MFP_CFG_LPM(DF_IO5, AF1, PULL_LOW)
-#define DF_IO6_ND_IO6		MFP_CFG_LPM(DF_IO6, AF1, PULL_LOW)
-#define DF_IO7_ND_IO7		MFP_CFG_LPM(DF_IO7, AF1, PULL_LOW)
-#define DF_IO8_ND_IO8		MFP_CFG_LPM(DF_IO8, AF1, PULL_LOW)
-#define DF_IO9_ND_IO9		MFP_CFG_LPM(DF_IO9, AF1, PULL_LOW)
-#define DF_IO10_ND_IO10		MFP_CFG_LPM(DF_IO10, AF1, PULL_LOW)
-#define DF_IO11_ND_IO11		MFP_CFG_LPM(DF_IO11, AF1, PULL_LOW)
-#define DF_IO12_ND_IO12		MFP_CFG_LPM(DF_IO12, AF1, PULL_LOW)
-#define DF_IO13_ND_IO13		MFP_CFG_LPM(DF_IO13, AF1, PULL_LOW)
-#define DF_IO14_ND_IO14		MFP_CFG_LPM(DF_IO14, AF1, PULL_LOW)
-#define DF_IO15_ND_IO15		MFP_CFG_LPM(DF_IO15, AF1, PULL_LOW)
-#define DF_nADV1_ALE_ND_ALE	MFP_CFG_LPM(DF_nADV1_ALE, AF1, PULL_HIGH)
-#define DF_nADV2_ALE_ND_ALE	MFP_CFG_LPM(DF_nADV2_ALE, AF1, PULL_HIGH)
-#define	DF_nADV2_ALE_nCS3	MFP_CFG_LPM(DF_nADV2_ALE, AF3, PULL_HIGH)
-#define DF_nCS0_ND_nCS0		MFP_CFG_LPM(DF_nCS0, AF1, PULL_HIGH)
-#define DF_nCS1_ND_nCS1		MFP_CFG_LPM(DF_nCS1, AF1, PULL_HIGH)
-#define DF_nRE_nOE_ND_nRE	MFP_CFG_LPM(DF_nRE_nOE, AF1, PULL_HIGH)
-#define DF_nWE_ND_nWE		MFP_CFG_LPM(DF_nWE, AF1, PULL_HIGH)
-
-/* PWM */
-#define GPIO41_PWM0		MFP_CFG_LPM(GPIO41, AF1, PULL_LOW)
-#define GPIO42_PWM1		MFP_CFG_LPM(GPIO42, AF1, PULL_LOW)
-#define GPIO43_PWM3		MFP_CFG_LPM(GPIO43, AF1, PULL_LOW)
-#define GPIO20_PWM0		MFP_CFG_LPM(GPIO20, AF2, PULL_LOW)
-#define GPIO21_PWM2		MFP_CFG_LPM(GPIO21, AF3, PULL_LOW)
-#define GPIO22_PWM3		MFP_CFG_LPM(GPIO22, AF3, PULL_LOW)
-#define GPIO32_PWM0		MFP_CFG_LPM(GPIO32, AF4, PULL_LOW)
-
-/* CIR */
-#define GPIO46_CIR_OUT		MFP_CFG(GPIO46, AF1)
-#define GPIO77_CIR_OUT		MFP_CFG(GPIO77, AF3)
-
-/* USB P2 */
-#define GPIO0_USB_P2_7		MFP_CFG(GPIO0, AF3)
-#define GPIO15_USB_P2_7		MFP_CFG(GPIO15, AF5)
-#define GPIO16_USB_P2_7		MFP_CFG(GPIO16, AF2)
-#define GPIO48_USB_P2_7		MFP_CFG(GPIO48, AF7)
-#define GPIO49_USB_P2_7		MFP_CFG(GPIO49, AF6)
-#define DF_IO9_USB_P2_7		MFP_CFG(DF_IO9, AF3)
-
-#define GPIO48_USB_P2_8		MFP_CFG(GPIO48, AF2)
-#define GPIO50_USB_P2_7		MFP_CFG_X(GPIO50, AF2, DS02X, FLOAT)
-#define GPIO51_USB_P2_5		MFP_CFG(GPIO51, AF2)
-#define GPIO47_USB_P2_4		MFP_CFG(GPIO47, AF2)
-#define GPIO53_USB_P2_3		MFP_CFG(GPIO53, AF2)
-#define GPIO54_USB_P2_6		MFP_CFG(GPIO54, AF2)
-#define GPIO49_USB_P2_2		MFP_CFG(GPIO49, AF2)
-#define GPIO52_USB_P2_1		MFP_CFG(GPIO52, AF2)
-
-#define GPIO63_USB_P2_8		MFP_CFG(GPIO63, AF3)
-#define GPIO64_USB_P2_7		MFP_CFG(GPIO64, AF3)
-#define GPIO65_USB_P2_6		MFP_CFG(GPIO65, AF3)
-#define GPIO66_USG_P2_5		MFP_CFG(GPIO66, AF3)
-#define GPIO67_USB_P2_4		MFP_CFG(GPIO67, AF3)
-#define GPIO68_USB_P2_3		MFP_CFG(GPIO68, AF3)
-#define GPIO69_USB_P2_2		MFP_CFG(GPIO69, AF3)
-#define GPIO70_USB_P2_1		MFP_CFG(GPIO70, AF3)
-
-/* ULPI */
-#define GPIO31_USB_ULPI_D0	MFP_CFG(GPIO31, AF4)
-#define GPIO30_USB_ULPI_D1	MFP_CFG(GPIO30, AF7)
-#define GPIO33_USB_ULPI_D2	MFP_CFG(GPIO33, AF5)
-#define GPIO34_USB_ULPI_D3	MFP_CFG(GPIO34, AF5)
-#define GPIO35_USB_ULPI_D4	MFP_CFG(GPIO35, AF5)
-#define GPIO36_USB_ULPI_D5	MFP_CFG(GPIO36, AF5)
-#define GPIO41_USB_ULPI_D6	MFP_CFG(GPIO41, AF5)
-#define GPIO42_USB_ULPI_D7	MFP_CFG(GPIO42, AF5)
-#define GPIO37_USB_ULPI_DIR	MFP_CFG(GPIO37, AF4)
-#define GPIO38_USB_ULPI_CLK	MFP_CFG(GPIO38, AF4)
-#define GPIO39_USB_ULPI_STP	MFP_CFG(GPIO39, AF4)
-#define GPIO40_USB_ULPI_NXT	MFP_CFG(GPIO40, AF4)
-
-#define GPIO3_CLK26MOUTDMD	MFP_CFG(GPIO3, AF3)
-#define GPIO40_CLK26MOUTDMD	MFP_CFG(GPIO40, AF7)
-#define GPIO94_CLK26MOUTDMD	MFP_CFG(GPIO94, AF5)
-#define GPIO104_CLK26MOUTDMD	MFP_CFG(GPIO104, AF4)
-#define DF_ADDR1_CLK26MOUTDMD	MFP_CFG(DF_ADDR2, AF3)
-#define DF_ADDR3_CLK26MOUTDMD	MFP_CFG(DF_ADDR3, AF3)
-
-#define GPIO14_CLK26MOUT	MFP_CFG(GPIO14, AF5)
-#define GPIO38_CLK26MOUT	MFP_CFG(GPIO38, AF7)
-#define GPIO92_CLK26MOUT	MFP_CFG(GPIO92, AF5)
-#define GPIO105_CLK26MOUT	MFP_CFG(GPIO105, AF4)
-
-#define GPIO2_CLK13MOUTDMD	MFP_CFG(GPIO2, AF3)
-#define GPIO39_CLK13MOUTDMD	MFP_CFG(GPIO39, AF7)
-#define GPIO50_CLK13MOUTDMD	MFP_CFG(GPIO50, AF3)
-#define GPIO93_CLK13MOUTDMD	MFP_CFG(GPIO93, AF5)
-#define GPIO103_CLK13MOUTDMD	MFP_CFG(GPIO103, AF4)
-#define DF_ADDR2_CLK13MOUTDMD	MFP_CFG(DF_ADDR2, AF3)
-
-/* 1 wire */
-#define GPIO95_OW_DQ_IN		MFP_CFG(GPIO95, AF5)
-
-#endif /* __ASM_ARCH_MFP_PXA9xx_H */
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
deleted file mode 100644
index d08f962ffb04..000000000000
--- a/arch/arm/mach-pxa/mioa701.c
+++ /dev/null
@@ -1,784 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Handles the Mitac Mio A701 Board
- *
- * Copyright (C) 2008 Robert Jarzmik
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/gpio_keys.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/rtc.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/pda_power.h>
-#include <linux/power_supply.h>
-#include <linux/wm97xx.h>
-#include <linux/mtd/physmap.h>
-#include <linux/reboot.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/max1586.h>
-#include <linux/slab.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "pxa27x.h"
-#include "regs-rtc.h"
-#include <linux/platform_data/keypad-pxa27x.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include "udc.h"
-#include "pxa27x-udc.h"
-#include <linux/platform_data/media/camera-pxa.h>
-#include <linux/platform_data/asoc-pxa.h>
-#include "smemc.h"
-
-#include "mioa701.h"
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned long mioa701_pin_config[] = {
-	/* Mio global */
-	MIO_CFG_OUT(GPIO9_CHARGE_EN, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO18_POWEROFF, AF0, DRIVE_LOW),
-	MFP_CFG_OUT(GPIO3, AF0, DRIVE_HIGH),
-	MFP_CFG_OUT(GPIO4, AF0, DRIVE_HIGH),
-	MIO_CFG_IN(GPIO80_MAYBE_CHARGE_VDROP, AF0),
-
-	/* Backlight PWM 0 */
-	GPIO16_PWM0_OUT,
-
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	MIO_CFG_IN(GPIO78_SDIO_RO, AF0),
-	MIO_CFG_IN(GPIO15_SDIO_INSERT, AF0),
-	MIO_CFG_OUT(GPIO91_SDIO_EN, AF0, DRIVE_LOW),
-
-	/* USB */
-	MIO_CFG_IN(GPIO13_nUSB_DETECT, AF0),
-	MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW),
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* QCI */
-	GPIO12_CIF_DD_7,
-	GPIO17_CIF_DD_6,
-	GPIO50_CIF_DD_3,
-	GPIO51_CIF_DD_2,
-	GPIO52_CIF_DD_4,
-	GPIO53_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO55_CIF_DD_1,
-	GPIO81_CIF_DD_0,
-	GPIO82_CIF_DD_5,
-	GPIO84_CIF_FV,
-	GPIO85_CIF_LV,
-	MIO_CFG_OUT(GPIO56_MT9M111_nOE, AF0, DRIVE_LOW),
-
-	/* Bluetooth */
-	MIO_CFG_IN(GPIO14_BT_nACTIVITY, AF0),
-	GPIO44_BTUART_CTS,
-	GPIO42_BTUART_RXD,
-	GPIO45_BTUART_RTS,
-	GPIO43_BTUART_TXD,
-	MIO_CFG_OUT(GPIO83_BT_ON, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO77_BT_UNKNOWN1, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO86_BT_MAYBE_nRESET, AF0, DRIVE_HIGH),
-
-	/* GPS */
-	MIO_CFG_OUT(GPIO23_GPS_UNKNOWN1, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO26_GPS_ON, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO27_GPS_RESET, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO106_GPS_UNKNOWN2, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO107_GPS_UNKNOWN3, AF0, DRIVE_LOW),
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* GSM */
-	MIO_CFG_OUT(GPIO24_GSM_MOD_RESET_CMD, AF0, DRIVE_LOW),
-	MIO_CFG_OUT(GPIO88_GSM_nMOD_ON_CMD, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO90_GSM_nMOD_OFF_CMD, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO114_GSM_nMOD_DTE_UART_STATE, AF0, DRIVE_HIGH),
-	MIO_CFG_IN(GPIO25_GSM_MOD_ON_STATE, AF0),
-	MIO_CFG_IN(GPIO113_GSM_EVENT, AF0) | WAKEUP_ON_EDGE_BOTH,
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-	GPIO36_FFUART_DCD,
-	GPIO37_FFUART_DSR,
-	GPIO39_FFUART_TXD,
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-
-	/* Sound */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO89_AC97_SYSCLK,
-	MIO_CFG_IN(GPIO12_HPJACK_INSERT, AF0),
-
-	/* Leds */
-	MIO_CFG_OUT(GPIO10_LED_nCharging, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO97_LED_nBlue, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO98_LED_nOrange, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO82_LED_nVibra, AF0, DRIVE_HIGH),
-	MIO_CFG_OUT(GPIO115_LED_nKeyboard, AF0, DRIVE_HIGH),
-
-	/* Keyboard */
-	MIO_CFG_IN(GPIO0_KEY_POWER, AF0) | WAKEUP_ON_EDGE_BOTH,
-	MIO_CFG_IN(GPIO93_KEY_VOLUME_UP, AF0),
-	MIO_CFG_IN(GPIO94_KEY_VOLUME_DOWN, AF0),
-	GPIO100_KP_MKIN_0,
-	GPIO101_KP_MKIN_1,
-	GPIO102_KP_MKIN_2,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* Unknown */
-	MFP_CFG_IN(GPIO20, AF0),
-	MFP_CFG_IN(GPIO21, AF0),
-	MFP_CFG_IN(GPIO33, AF0),
-	MFP_CFG_OUT(GPIO49, AF0, DRIVE_HIGH),
-	MFP_CFG_OUT(GPIO57, AF0, DRIVE_HIGH),
-	MFP_CFG_IN(GPIO96, AF0),
-	MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH),
-};
-
-static struct pwm_lookup mioa701_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 4000 * 1024,
-		   PWM_POLARITY_NORMAL),
-};
-
-/* LCD Screen and Backlight */
-static struct platform_pwm_backlight_data mioa701_backlight_data = {
-	.max_brightness	= 100,
-	.dft_brightness	= 50,
-};
-
-/*
- * LTM0305A776C LCD panel timings
- *
- * see:
- *  - the LTM0305A776C datasheet,
- *  - and the PXA27x Programmers' manual
- */
-static struct pxafb_mode_info mioa701_ltm0305a776c = {
-	.pixclock		= 220000,	/* CLK=4.545 MHz */
-	.xres			= 240,
-	.yres			= 320,
-	.bpp			= 16,
-	.hsync_len		= 4,
-	.vsync_len		= 2,
-	.left_margin		= 6,
-	.right_margin		= 4,
-	.upper_margin		= 5,
-	.lower_margin		= 3,
-};
-
-static void mioa701_lcd_power(int on, struct fb_var_screeninfo *si)
-{
-	gpio_set_value(GPIO87_LCD_POWER, on);
-}
-
-static struct pxafb_mach_info mioa701_pxafb_info = {
-	.modes			= &mioa701_ltm0305a776c,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_lcd_power	= mioa701_lcd_power,
-};
-
-/*
- * Keyboard configuration
- */
-static const unsigned int mioa701_matrix_keys[] = {
-	KEY(0, 0, KEY_UP),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_MEDIA),
-	KEY(1, 0, KEY_DOWN),
-	KEY(1, 1, KEY_ENTER),
-	KEY(1, 2, KEY_CONNECT),	/* GPS key */
-	KEY(2, 0, KEY_LEFT),
-	KEY(2, 1, KEY_PHONE),	/* Phone Green key */
-	KEY(2, 2, KEY_CAMERA)	/* Camera key */
-};
-
-static struct matrix_keymap_data mioa701_matrix_keymap_data = {
-	.keymap			= mioa701_matrix_keys,
-	.keymap_size		= ARRAY_SIZE(mioa701_matrix_keys),
-};
-
-static struct pxa27x_keypad_platform_data mioa701_keypad_info = {
-	.matrix_key_rows = 3,
-	.matrix_key_cols = 3,
-	.matrix_keymap_data = &mioa701_matrix_keymap_data,
-};
-
-/*
- * GPIO Key Configuration
- */
-#define MIO_KEY(key, _gpio, _desc, _wakeup) \
-	{ .code = (key), .gpio = (_gpio), .active_low = 0, \
-	.desc = (_desc), .type = EV_KEY, .wakeup = (_wakeup) }
-static struct gpio_keys_button mioa701_button_table[] = {
-	MIO_KEY(KEY_EXIT, GPIO0_KEY_POWER, "Power button", 1),
-	MIO_KEY(KEY_VOLUMEUP, GPIO93_KEY_VOLUME_UP, "Volume up", 0),
-	MIO_KEY(KEY_VOLUMEDOWN, GPIO94_KEY_VOLUME_DOWN, "Volume down", 0),
-	MIO_KEY(KEY_HP, GPIO12_HPJACK_INSERT, "HP jack detect", 0)
-};
-
-static struct gpio_keys_platform_data mioa701_gpio_keys_data = {
-	.buttons  = mioa701_button_table,
-	.nbuttons = ARRAY_SIZE(mioa701_button_table),
-};
-
-/*
- * Leds and vibrator
- */
-#define ONE_LED(_gpio, _name) \
-{ .gpio = (_gpio), .name = (_name), .active_low = true }
-static struct gpio_led gpio_leds[] = {
-	ONE_LED(GPIO10_LED_nCharging, "mioa701:charging"),
-	ONE_LED(GPIO97_LED_nBlue, "mioa701:blue"),
-	ONE_LED(GPIO98_LED_nOrange, "mioa701:orange"),
-	ONE_LED(GPIO82_LED_nVibra, "mioa701:vibra"),
-	ONE_LED(GPIO115_LED_nKeyboard, "mioa701:keyboard")
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds = gpio_leds,
-	.num_leds = ARRAY_SIZE(gpio_leds),
-};
-
-/*
- * GSM Sagem XS200 chip
- *
- * GSM handling was purged from kernel. For history, this is the way to go :
- *   - init : GPIO24_GSM_MOD_RESET_CMD = 0, GPIO114_GSM_nMOD_DTE_UART_STATE = 1
- *            GPIO88_GSM_nMOD_ON_CMD = 1, GPIO90_GSM_nMOD_OFF_CMD = 1
- *   - reset : GPIO24_GSM_MOD_RESET_CMD = 1, msleep(100),
- *             GPIO24_GSM_MOD_RESET_CMD = 0
- *   - turn on  : GPIO88_GSM_nMOD_ON_CMD = 0, msleep(1000),
- *                GPIO88_GSM_nMOD_ON_CMD = 1
- *   - turn off : GPIO90_GSM_nMOD_OFF_CMD = 0, msleep(1000),
- *                GPIO90_GSM_nMOD_OFF_CMD = 1
- */
-static int is_gsm_on(void)
-{
-	int is_on;
-
-	is_on = !!gpio_get_value(GPIO25_GSM_MOD_ON_STATE);
-	return is_on;
-}
-
-irqreturn_t gsm_on_irq(int irq, void *p)
-{
-	printk(KERN_DEBUG "Mioa701: GSM status changed to %s\n",
-	       is_gsm_on() ? "on" : "off");
-	return IRQ_HANDLED;
-}
-
-static struct gpio gsm_gpios[] = {
-	{ GPIO25_GSM_MOD_ON_STATE, GPIOF_IN, "GSM state" },
-	{ GPIO113_GSM_EVENT, GPIOF_IN, "GSM event" },
-};
-
-static int __init gsm_init(void)
-{
-	int rc;
-
-	rc = gpio_request_array(ARRAY_AND_SIZE(gsm_gpios));
-	if (rc)
-		goto err_gpio;
-	rc = request_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), gsm_on_irq,
-			 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			 "GSM XS200 Power Irq", NULL);
-	if (rc)
-		goto err_irq;
-
-	gpio_set_wake(GPIO113_GSM_EVENT, 1);
-	return 0;
-
-err_irq:
-	printk(KERN_ERR "Mioa701: Can't request GSM_ON irq\n");
-	gpio_free_array(ARRAY_AND_SIZE(gsm_gpios));
-err_gpio:
-	printk(KERN_ERR "Mioa701: gsm not available\n");
-	return rc;
-}
-
-static void gsm_exit(void)
-{
-	free_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), NULL);
-	gpio_free_array(ARRAY_AND_SIZE(gsm_gpios));
-}
-
-/*
- * Bluetooth BRF6150 chip
- *
- * BT handling was purged from kernel. For history, this is the way to go :
- * - turn on  : GPIO83_BT_ON = 1
- * - turn off : GPIO83_BT_ON = 0
- */
-
-/*
- * GPS Sirf Star III chip
- *
- * GPS handling was purged from kernel. For history, this is the way to go :
- * - init : GPIO23_GPS_UNKNOWN1 = 1, GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0
- *          GPIO106_GPS_UNKNOWN2 = 0, GPIO107_GPS_UNKNOWN3 = 0
- * - turn on  : GPIO27_GPS_RESET = 1, GPIO26_GPS_ON = 1
- * - turn off : GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0
- */
-
-/*
- * USB UDC
- */
-static int is_usb_connected(void)
-{
-	return !gpio_get_value(GPIO13_nUSB_DETECT);
-}
-
-static struct pxa2xx_udc_mach_info mioa701_udc_info = {
-	.udc_is_connected = is_usb_connected,
-	.gpio_pullup	  = GPIO22_USB_ENABLE,
-};
-
-static struct gpiod_lookup_table gpio_vbus_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO13_nUSB_DETECT,
-			    "vbus", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-/*
- * SDIO/MMC Card controller
- */
-/**
- * The card detect interrupt isn't debounced so we delay it by 250ms
- * to give the card a chance to fully insert/eject.
- */
-static struct pxamci_platform_data mioa701_mci_info = {
-	.detect_delay_ms	= 250,
-	.ocr_mask 		= MMC_VDD_32_33 | MMC_VDD_33_34,
-};
-
-static struct gpiod_lookup_table mioa701_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		/* Card detect on GPIO 15 */
-		GPIO_LOOKUP("gpio-pxa", GPIO15_SDIO_INSERT,
-			    "cd", GPIO_ACTIVE_LOW),
-		/* Write protect on GPIO 78 */
-		GPIO_LOOKUP("gpio-pxa", GPIO78_SDIO_RO,
-			    "wp", GPIO_ACTIVE_LOW),
-		/* Power on GPIO 91 */
-		GPIO_LOOKUP("gpio-pxa", GPIO91_SDIO_EN,
-			    "power", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/* FlashRAM */
-static struct resource docg3_resource = {
-	.start = PXA_CS0_PHYS,
-	.end   = PXA_CS0_PHYS + SZ_8K - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device docg3 = {
-	.name	       = "docg3",
-	.id	       = -1,
-	.resource      = &docg3_resource,
-	.num_resources = 1,
-	.dev = {
-		.platform_data = NULL,
-	},
-};
-
-/*
- * Suspend/Resume bootstrap management
- *
- * MIO A701 reboot sequence is highly ROM dependent. From the one dissassembled,
- * this sequence is as follows :
- *   - disables interrupts
- *   - initialize SDRAM (self refresh RAM into active RAM)
- *   - initialize GPIOs (depends on value at 0xa020b020)
- *   - initialize coprossessors
- *   - if edge detect on PWR_SCL(GPIO3), then proceed to cold start
- *   - or if value at 0xa020b000 not equal to 0x0f0f0f0f, proceed to cold start
- *   - else do a resume, ie. jump to addr 0xa0100000
- */
-#define RESUME_ENABLE_ADDR	0xa020b000
-#define RESUME_ENABLE_VAL	0x0f0f0f0f
-#define RESUME_BT_ADDR		0xa020b020
-#define RESUME_UNKNOWN_ADDR	0xa020b024
-#define RESUME_VECTOR_ADDR	0xa0100000
-#define BOOTSTRAP_WORDS		mioa701_bootstrap_lg/4
-
-static u32 *save_buffer;
-
-static void install_bootstrap(void)
-{
-	int i;
-	u32 *rom_bootstrap  = phys_to_virt(RESUME_VECTOR_ADDR);
-	u32 *src = &mioa701_bootstrap;
-
-	for (i = 0; i < BOOTSTRAP_WORDS; i++)
-		rom_bootstrap[i] = src[i];
-}
-
-
-static int mioa701_sys_suspend(void)
-{
-	int i = 0, is_bt_on;
-	u32 *mem_resume_vector	= phys_to_virt(RESUME_VECTOR_ADDR);
-	u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR);
-	u32 *mem_resume_bt	= phys_to_virt(RESUME_BT_ADDR);
-	u32 *mem_resume_unknown	= phys_to_virt(RESUME_UNKNOWN_ADDR);
-
-	/* Devices prepare suspend */
-	is_bt_on = !!gpio_get_value(GPIO83_BT_ON);
-	pxa2xx_mfp_set_lpm(GPIO83_BT_ON,
-			   is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW);
-
-	for (i = 0; i < BOOTSTRAP_WORDS; i++)
-		save_buffer[i] = mem_resume_vector[i];
-	save_buffer[i++] = *mem_resume_enabler;
-	save_buffer[i++] = *mem_resume_bt;
-	save_buffer[i++] = *mem_resume_unknown;
-
-	*mem_resume_enabler = RESUME_ENABLE_VAL;
-	*mem_resume_bt	    = is_bt_on;
-
-	install_bootstrap();
-	return 0;
-}
-
-static void mioa701_sys_resume(void)
-{
-	int i = 0;
-	u32 *mem_resume_vector	= phys_to_virt(RESUME_VECTOR_ADDR);
-	u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR);
-	u32 *mem_resume_bt	= phys_to_virt(RESUME_BT_ADDR);
-	u32 *mem_resume_unknown	= phys_to_virt(RESUME_UNKNOWN_ADDR);
-
-	for (i = 0; i < BOOTSTRAP_WORDS; i++)
-		mem_resume_vector[i] = save_buffer[i];
-	*mem_resume_enabler = save_buffer[i++];
-	*mem_resume_bt	    = save_buffer[i++];
-	*mem_resume_unknown = save_buffer[i++];
-}
-
-static struct syscore_ops mioa701_syscore_ops = {
-	.suspend	= mioa701_sys_suspend,
-	.resume		= mioa701_sys_resume,
-};
-
-static int __init bootstrap_init(void)
-{
-	int save_size = mioa701_bootstrap_lg + (sizeof(u32) * 3);
-
-	register_syscore_ops(&mioa701_syscore_ops);
-
-	save_buffer = kmalloc(save_size, GFP_KERNEL);
-	if (!save_buffer)
-		return -ENOMEM;
-	printk(KERN_INFO "MioA701: allocated %d bytes for bootstrap\n",
-	       save_size);
-	return 0;
-}
-
-static void bootstrap_exit(void)
-{
-	kfree(save_buffer);
-	unregister_syscore_ops(&mioa701_syscore_ops);
-
-	printk(KERN_CRIT "Unregistering mioa701 suspend will hang next"
-	       "resume !!!\n");
-}
-
-/*
- * Power Supply
- */
-static char *supplicants[] = {
-	"mioa701_battery"
-};
-
-static int is_ac_connected(void)
-{
-	return gpio_get_value(GPIO96_AC_DETECT);
-}
-
-static void mioa701_set_charge(int flags)
-{
-	gpio_set_value(GPIO9_CHARGE_EN, (flags == PDA_POWER_CHARGE_USB));
-}
-
-static struct pda_power_pdata power_pdata = {
-	.is_ac_online	= is_ac_connected,
-	.is_usb_online	= is_usb_connected,
-	.set_charge = mioa701_set_charge,
-	.supplied_to = supplicants,
-	.num_supplicants = ARRAY_SIZE(supplicants),
-};
-
-static struct resource power_resources[] = {
-	[0] = {
-		.name	= "ac",
-		.start	= PXA_GPIO_TO_IRQ(GPIO96_AC_DETECT),
-		.end	= PXA_GPIO_TO_IRQ(GPIO96_AC_DETECT),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-		IORESOURCE_IRQ_LOWEDGE,
-	},
-	[1] = {
-		.name	= "usb",
-		.start	= PXA_GPIO_TO_IRQ(GPIO13_nUSB_DETECT),
-		.end	= PXA_GPIO_TO_IRQ(GPIO13_nUSB_DETECT),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-		IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct platform_device power_dev = {
-	.name		= "pda-power",
-	.id		= -1,
-	.resource	= power_resources,
-	.num_resources	= ARRAY_SIZE(power_resources),
-	.dev = {
-		.platform_data	= &power_pdata,
-	},
-};
-
-static struct wm97xx_batt_pdata mioa701_battery_data = {
-	.batt_aux	= WM97XX_AUX_ID1,
-	.temp_aux	= -1,
-	.min_voltage	= 0xc00,
-	.max_voltage	= 0xfc0,
-	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LION,
-	.batt_div	= 1,
-	.batt_mult	= 1,
-	.batt_name	= "mioa701_battery",
-};
-
-static struct wm97xx_pdata mioa701_wm97xx_pdata = {
-	.batt_pdata	= &mioa701_battery_data,
-};
-
-/*
- * Voltage regulation
- */
-static struct regulator_consumer_supply max1586_consumers[] = {
-	REGULATOR_SUPPLY("vcc_core", NULL),
-};
-
-static struct regulator_init_data max1586_v3_info = {
-	.constraints = {
-		.name = "vcc_core range",
-		.min_uV = 1000000,
-		.max_uV = 1705000,
-		.always_on = 1,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(max1586_consumers),
-	.consumer_supplies = max1586_consumers,
-};
-
-static struct max1586_subdev_data max1586_subdevs[] = {
-	{ .name = "vcc_core", .id = MAX1586_V3,
-	  .platform_data = &max1586_v3_info },
-};
-
-static struct max1586_platform_data max1586_info = {
-	.subdevs = max1586_subdevs,
-	.num_subdevs = ARRAY_SIZE(max1586_subdevs),
-	.v3_gain = MAX1586_GAIN_NO_R24, /* 700..1475 mV */
-};
-
-/*
- * Camera interface
- */
-struct pxacamera_platform_data mioa701_pxacamera_platform_data = {
-	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
-		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
-	.mclk_10khz = 5000,
-	.sensor_i2c_adapter_id = 0,
-	.sensor_i2c_address = 0x5d,
-};
-
-static struct i2c_board_info __initdata mioa701_pi2c_devices[] = {
-	{
-		I2C_BOARD_INFO("max1586", 0x14),
-		.platform_data = &max1586_info,
-	},
-};
-
-/* Board I2C devices. */
-static struct i2c_board_info mioa701_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("mt9m111", 0x5d),
-	},
-};
-
-struct i2c_pxa_platform_data i2c_pdata = {
-	.fast_mode = 1,
-};
-
-static pxa2xx_audio_ops_t mioa701_ac97_info = {
-	.reset_gpio = 95,
-	.codec_pdata = { &mioa701_wm97xx_pdata, },
-};
-
-/*
- * Mio global
- */
-
-/* Devices */
-#define MIO_PARENT_DEV(var, strname, tparent, pdata)	\
-static struct platform_device var = {			\
-	.name		= strname,			\
-	.id		= -1,				\
-	.dev		= {				\
-		.platform_data = pdata,			\
-		.parent	= tparent,			\
-	},						\
-};
-#define MIO_SIMPLE_DEV(var, strname, pdata)	\
-	MIO_PARENT_DEV(var, strname, NULL, pdata)
-
-MIO_SIMPLE_DEV(mioa701_gpio_keys, "gpio-keys",	    &mioa701_gpio_keys_data)
-MIO_PARENT_DEV(mioa701_backlight, "pwm-backlight",  &pxa27x_device_pwm0.dev,
-		&mioa701_backlight_data);
-MIO_SIMPLE_DEV(mioa701_led,	  "leds-gpio",	    &gpio_led_info)
-MIO_SIMPLE_DEV(pxa2xx_pcm,	  "pxa2xx-pcm",	    NULL)
-MIO_SIMPLE_DEV(mioa701_sound,	  "mioa701-wm9713", NULL)
-MIO_SIMPLE_DEV(mioa701_board,	  "mioa701-board",  NULL)
-MIO_SIMPLE_DEV(gpio_vbus,	  "gpio-vbus",      NULL);
-
-static struct platform_device *devices[] __initdata = {
-	&mioa701_gpio_keys,
-	&mioa701_backlight,
-	&mioa701_led,
-	&pxa2xx_pcm,
-	&mioa701_sound,
-	&power_dev,
-	&docg3,
-	&gpio_vbus,
-	&mioa701_board,
-};
-
-static void mioa701_machine_exit(void);
-
-static void mioa701_poweroff(void)
-{
-	mioa701_machine_exit();
-	pxa_restart(REBOOT_SOFT, NULL);
-}
-
-static void mioa701_restart(enum reboot_mode c, const char *cmd)
-{
-	mioa701_machine_exit();
-	pxa_restart(REBOOT_SOFT, cmd);
-}
-
-static struct gpio global_gpios[] = {
-	{ GPIO9_CHARGE_EN, GPIOF_OUT_INIT_HIGH, "Charger enable" },
-	{ GPIO18_POWEROFF, GPIOF_OUT_INIT_LOW, "Power Off" },
-	{ GPIO87_LCD_POWER, GPIOF_OUT_INIT_LOW, "LCD Power" },
-	{ GPIO56_MT9M111_nOE, GPIOF_OUT_INIT_LOW, "Camera nOE" },
-};
-
-static struct regulator_consumer_supply fixed_5v0_consumers[] = {
-	REGULATOR_SUPPLY("power", "pwm-backlight"),
-};
-
-static void __init mioa701_machine_init(void)
-{
-	int rc;
-
-	PSLR  = 0xff100000; /* SYSDEL=125ms, PWRDEL=125ms, PSLR_SL_ROD=1 */
-	PCFR = PCFR_DC_EN | PCFR_GPR_EN | PCFR_OPDE;
-	RTTR = 32768 - 1; /* Reset crazy WinCE value */
-	UP2OCR = UP2OCR_HXOE;
-
-	/*
-	 * Set up the flash memory : DiskOnChip G3 on first static memory bank
-	 */
-	__raw_writel(0x7ff02dd8, MSC0);
-	__raw_writel(0x0001c391, MCMEM0);
-	__raw_writel(0x0001c391, MCATT0);
-	__raw_writel(0x0001c391, MCIO0);
-
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(mioa701_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	rc = gpio_request_array(ARRAY_AND_SIZE(global_gpios));
-	if (rc)
-		pr_err("MioA701: Failed to request GPIOs: %d", rc);
-	bootstrap_init();
-	pxa_set_fb_info(NULL, &mioa701_pxafb_info);
-	gpiod_add_lookup_table(&mioa701_mci_gpio_table);
-	pxa_set_mci_info(&mioa701_mci_info);
-	pxa_set_keypad_info(&mioa701_keypad_info);
-	pxa_set_udc_info(&mioa701_udc_info);
-	pxa_set_ac97_info(&mioa701_ac97_info);
-	pm_power_off = mioa701_poweroff;
-	pwm_add_table(mioa701_pwm_lookup, ARRAY_SIZE(mioa701_pwm_lookup));
-	gpiod_add_lookup_table(&gpio_vbus_gpiod_table);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	gsm_init();
-
-	i2c_register_board_info(0, ARRAY_AND_SIZE(mioa701_i2c_devices));
-	i2c_register_board_info(1, ARRAY_AND_SIZE(mioa701_pi2c_devices));
-	pxa_set_i2c_info(&i2c_pdata);
-	pxa27x_set_i2c_power_info(NULL);
-	pxa_set_camera_info(&mioa701_pxacamera_platform_data);
-
-	regulator_register_always_on(0, "fixed-5.0V", fixed_5v0_consumers,
-				     ARRAY_SIZE(fixed_5v0_consumers),
-				     5000000);
-	regulator_has_full_constraints();
-}
-
-static void mioa701_machine_exit(void)
-{
-	bootstrap_exit();
-	gsm_exit();
-}
-
-MACHINE_START(MIOA701, "MIO A701")
-	.atag_offset	= 0x100,
-	.map_io		= &pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= &pxa27x_init_irq,
-	.handle_irq	= &pxa27x_handle_irq,
-	.init_machine	= mioa701_machine_init,
-	.init_time	= pxa_timer_init,
-	.restart	= mioa701_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/mioa701.h b/arch/arm/mach-pxa/mioa701.h
deleted file mode 100644
index d94295c67460..000000000000
--- a/arch/arm/mach-pxa/mioa701.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _MIOA701_H_
-#define _MIOA701_H_
-
-#define MIO_CFG_IN(pin, af)		\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\
-	 (MFP_PIN(pin) | MFP_##af | MFP_DIR_IN))
-
-#define MIO_CFG_OUT(pin, af, state)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\
-	 (MFP_PIN(pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
-
-/* Global GPIOs */
-#define GPIO9_CHARGE_EN				9
-#define GPIO18_POWEROFF				18
-#define GPIO87_LCD_POWER			87
-#define GPIO96_AC_DETECT			96
-#define GPIO80_MAYBE_CHARGE_VDROP		80	/* Drop of 88mV */
-
-/* USB */
-#define GPIO13_nUSB_DETECT			13
-#define GPIO22_USB_ENABLE			22
-
-/* SDIO bits */
-#define GPIO78_SDIO_RO				78
-#define GPIO15_SDIO_INSERT			15
-#define GPIO91_SDIO_EN				91
-
-/* Bluetooth */
-#define GPIO14_BT_nACTIVITY			14
-#define GPIO83_BT_ON				83
-#define GPIO77_BT_UNKNOWN1			77
-#define GPIO86_BT_MAYBE_nRESET			86
-
-/* GPS */
-#define GPIO23_GPS_UNKNOWN1			23
-#define GPIO26_GPS_ON				26
-#define GPIO27_GPS_RESET			27
-#define GPIO106_GPS_UNKNOWN2			106
-#define GPIO107_GPS_UNKNOWN3			107
-
-/* GSM */
-#define GPIO24_GSM_MOD_RESET_CMD		24
-#define GPIO88_GSM_nMOD_ON_CMD			88
-#define GPIO90_GSM_nMOD_OFF_CMD			90
-#define GPIO114_GSM_nMOD_DTE_UART_STATE 	114
-#define GPIO25_GSM_MOD_ON_STATE			25
-#define GPIO113_GSM_EVENT			113
-
-/* SOUND */
-#define GPIO12_HPJACK_INSERT			12
-
-/* LEDS */
-#define GPIO10_LED_nCharging			10
-#define GPIO97_LED_nBlue			97
-#define GPIO98_LED_nOrange			98
-#define GPIO82_LED_nVibra			82
-#define GPIO115_LED_nKeyboard			115
-
-/* Keyboard */
-#define GPIO0_KEY_POWER				0
-#define GPIO93_KEY_VOLUME_UP			93
-#define GPIO94_KEY_VOLUME_DOWN			94
-
-/* Camera */
-#define GPIO56_MT9M111_nOE			56
-
-extern struct input_dev *mioa701_evdev;
-extern void mioa701_gpio_lpm_set(unsigned long mfp_pin);
-
-/* Assembler externals mioa701_bootresume.S */
-extern u32 mioa701_bootstrap;
-extern u32 mioa701_jumpaddr;
-extern u32 mioa701_bootstrap_lg;
-
-#endif /* _MIOA701_H */
diff --git a/arch/arm/mach-pxa/mioa701_bootresume.S b/arch/arm/mach-pxa/mioa701_bootresume.S
deleted file mode 100644
index 4ad2fa27fc41..000000000000
--- a/arch/arm/mach-pxa/mioa701_bootresume.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/* Bootloader to resume MIO A701
- *
- * 2007-1-12 Robert Jarzmik
-*/
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-/*
- * Note: Yes, part of the following code is located into the .data section.
- *       This is to allow jumpaddr to be accessed with a relative load
- *       while we can't rely on any MMU translation.  We could have put
- *       sleep_save_sp in the .text section as well, but some setups might
- *       insist on it to be truly read-only.
- */
-	.data
-	.align	2
-ENTRY(mioa701_bootstrap)
-0:
-	b	1f
-ENTRY(mioa701_jumpaddr)
-	.word	0x40f00008		@ PSPR in no-MMU mode
-1:
-	mov	r0,     #0xa0000000	@ Don't suppose memory access works
-	orr	r0, r0, #0x00200000	@ even if it's supposed to
-	orr	r0, r0, #0x0000b000
-	mov	r1, #0
-	str	r1, [r0]		@ Early disable resume for next boot
-	ldr	r0, mioa701_jumpaddr	@ (Murphy's Law)
-	ldr	r0, [r0]
-	ret	r0
-2:
-
-ENTRY(mioa701_bootstrap_lg)
-	.data
-	.align	2
-	.word	2b-0b
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
deleted file mode 100644
index 8ef8ac4ab4ac..000000000000
--- a/arch/arm/mach-pxa/mp900.c
+++ /dev/null
@@ -1,101 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/mp900.c
- *
- *  Support for the NEC MobilePro900/C platform
- *
- *  Based on mach-pxa/gumstix.c
- *
- *  2007, 2008 Kristoffer Ericson <kristoffer.ericson@gmail.com>
- *  2007, 2008 Michael Petchkovsky <mkpetch@internode.on.net>
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
-#include <linux/usb/isp116x.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "pxa25x.h"
-#include "generic.h"
-
-static void isp116x_pfm_delay(struct device *dev, int delay)
-{
-
-	/* 400MHz PXA2 = 2.5ns / instruction */
-
-	int cyc = delay / 10;
-
-	/* 4 Instructions = 4 x 2.5ns = 10ns */
-	__asm__ volatile ("0:\n"
-		"subs %0, %1, #1\n"
-		"bge 0b\n"
-		:"=r" (cyc)
-		:"0"(cyc)
-	);
-}
-
-static struct isp116x_platform_data isp116x_pfm_data = {
-	.remote_wakeup_enable = 1,
-	.delay = isp116x_pfm_delay,
-};
-
-static struct resource isp116x_pfm_resources[] = {
-	[0] =	{
-		.start	= 0x0d000000,
-		.end	= 0x0d000000 + 1,
-		.flags	= IORESOURCE_MEM,
-		},
-	[1] =	{
-		.start  = 0x0d000000 + 4,
-		.end	= 0x0d000000 + 5,
-		.flags  = IORESOURCE_MEM,
-		},
-	[2] =	{
-		.start	= 61,
-		.end	= 61,
-		.flags	= IORESOURCE_IRQ,
-		},
-};
-
-static struct platform_device mp900c_dummy_device = {
-	.name		= "mp900c_dummy",
-	.id		= -1,
-};
-
-static struct platform_device mp900c_usb = {
-	.name		= "isp116x-hcd",
-	.num_resources	= ARRAY_SIZE(isp116x_pfm_resources),
-	.resource	= isp116x_pfm_resources,
-	.dev.platform_data = &isp116x_pfm_data,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&mp900c_dummy_device,
-	&mp900c_usb,
-};
-
-static void __init mp900c_init(void)
-{
-	printk(KERN_INFO "MobilePro 900/C machine init\n");
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-/* Maintainer - Michael Petchkovsky <mkpetch@internode.on.net> */
-MACHINE_START(NEC_MP900, "MobilePro900/C")
-	.atag_offset	= 0x220100,
-	.init_time	= pxa_timer_init,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_machine	= mp900c_init,
-	.restart	= pxa_restart,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c
deleted file mode 100644
index 35546b59c88e..000000000000
--- a/arch/arm/mach-pxa/mxm8x10.c
+++ /dev/null
@@ -1,477 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/mxm8x10.c
- *
- * Support for the Embedian MXM-8x10 Computer on Module
- *
- * Copyright (C) 2006 Marvell International Ltd.
- * Copyright (C) 2009 Embedian Inc.
- * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
- *
- * 2007-09-04: eric miao <eric.y.miao@gmail.com>
- *             rewrite to align with latest kernel
- *
- * 2010-01-09: Edwin Peer <epeer@tmtservices.co.za>
- * 	       Hennie van der Merwe <hvdmerwe@tmtservices.co.za>
- *             rework for upstream merge
- */
-
-#include <linux/serial_8250.h>
-#include <linux/dm9000.h>
-#include <linux/gpio/machine.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <linux/platform_data/mtd-nand-pxa3xx.h>
-
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <linux/platform_data/asoc-pxa.h>
-#include "pxa320.h"
-
-#include "mxm8x10.h"
-
-#include "devices.h"
-#include "generic.h"
-
-/* GPIO pin definition
-
-External device stuff   - Leave unconfigured for now...
----------------------
-GPIO0   -   DREQ    (External DMA Request)
-GPIO3   -   nGCS2   (External Chip Select) Where is nGCS0; nGCS1; nGCS4; nGCS5 ?
-GPIO4   -   nGCS3
-GPIO15  -   EXT_GPIO1
-GPIO16  -   EXT_GPIO2
-GPIO17  -   EXT_GPIO3
-GPIO24  -   EXT_GPIO4
-GPIO25  -   EXT_GPIO5
-GPIO26  -   EXT_GPIO6
-GPIO27  -   EXT_GPIO7
-GPIO28  -   EXT_GPIO8
-GPIO29  -   EXT_GPIO9
-GPIO30  -   EXT_GPIO10
-GPIO31  -   EXT_GPIO11
-GPIO57  -   EXT_GPIO12
-GPIO74  -   EXT_IRQ1
-GPIO75  -   EXT_IRQ2
-GPIO76  -   EXT_IRQ3
-GPIO77  -   EXT_IRQ4
-GPIO78  -   EXT_IRQ5
-GPIO79  -   EXT_IRQ6
-GPIO80  -   EXT_IRQ7
-GPIO81  -   EXT_IRQ8
-GPIO87  -   VCCIO_PWREN (External Device PWREN)
-
-Dallas 1-Wire   - Leave unconfigured for now...
--------------
-GPIO0_2 -   DS - 1Wire
-
-Ethernet
---------
-GPIO1   -   DM9000 PWR
-GPIO9   -   DM9K_nIRQ
-GPIO36  -   DM9K_RESET
-
-Keypad  - Leave unconfigured by for now...
-------
-GPIO1_2 -   KP_DKIN0
-GPIO5_2 -   KP_MKOUT7
-GPIO82  -   KP_DKIN1
-GPIO85  -   KP_DKIN2
-GPIO86  -   KP_DKIN3
-GPIO113 -   KP_MKIN0
-GPIO114 -   KP_MKIN1
-GPIO115 -   KP_MKIN2
-GPIO116 -   KP_MKIN3
-GPIO117 -   KP_MKIN4
-GPIO118 -   KP_MKIN5
-GPIO119 -   KP_MKIN6
-GPIO120 -   KP_MKIN7
-GPIO121 -   KP_MKOUT0
-GPIO122 -   KP_MKOUT1
-GPIO122 -   KP_MKOUT2
-GPIO123 -   KP_MKOUT3
-GPIO124 -   KP_MKOUT4
-GPIO125 -   KP_MKOUT5
-GPIO127 -   KP_MKOUT6
-
-Data Bus    - Leave unconfigured for now...
---------
-GPIO2   -   nWait (Data Bus)
-
-USB Device
-----------
-GPIO4_2 -   USBD_PULLUP
-GPIO10  -   UTM_CLK (USB Device UTM Clk)
-GPIO49  -   USB 2.0 Device UTM_DATA0
-GPIO50  -   USB 2.0 Device UTM_DATA1
-GPIO51  -   USB 2.0 Device UTM_DATA2
-GPIO52  -   USB 2.0 Device UTM_DATA3
-GPIO53  -   USB 2.0 Device UTM_DATA4
-GPIO54  -   USB 2.0 Device UTM_DATA5
-GPIO55  -   USB 2.0 Device UTM_DATA6
-GPIO56  -   USB 2.0 Device UTM_DATA7
-GPIO58  -   UTM_RXVALID (USB 2.0 Device)
-GPIO59  -   UTM_RXACTIVE (USB 2.0 Device)
-GPIO60  -   UTM_RXERROR
-GPIO61  -   UTM_OPMODE0
-GPIO62  -   UTM_OPMODE1
-GPIO71  -   USBD_INT    (USB Device?)
-GPIO73  -   UTM_TXREADY (USB 2.0 Device)
-GPIO83  -   UTM_TXVALID (USB 2.0 Device)
-GPIO98  -   UTM_RESET   (USB 2.0 device)
-GPIO99  -   UTM_XCVR_SELECT
-GPIO100 -   UTM_TERM_SELECT
-GPIO101 -   UTM_SUSPENDM_X
-GPIO102 -   UTM_LINESTATE0
-GPIO103 -   UTM_LINESTATE1
-
-Card-Bus Interface  - Leave unconfigured for now...
-------------------
-GPIO5   -   nPIOR (I/O space output enable)
-GPIO6   -   nPIOW (I/O space write enable)
-GPIO7   -   nIOS16 (Input from I/O space telling size of data bus)
-GPIO8   -   nPWAIT (Input for inserting wait states)
-
-LCD
----
-GPIO6_2     -   LDD0
-GPIO7_2     -   LDD1
-GPIO8_2     -   LDD2
-GPIO9_2     -   LDD3
-GPIO11_2    -   LDD5
-GPIO12_2    -   LDD6
-GPIO13_2    -   LDD7
-GPIO14_2    -   VSYNC
-GPIO15_2    -   HSYNC
-GPIO16_2    -   VCLK
-GPIO17_2    -   HCLK
-GPIO18_2    -   VDEN
-GPIO63      -   LDD8    (CPU LCD)
-GPIO64      -   LDD9    (CPU LCD)
-GPIO65      -   LDD10   (CPU LCD)
-GPIO66      -   LDD11   (CPU LCD)
-GPIO67      -   LDD12   (CPU LCD)
-GPIO68      -   LDD13   (CPU LCD)
-GPIO69      -   LDD14   (CPU LCD)
-GPIO70      -   LDD15   (CPU LCD)
-GPIO88      -   VCCLCD_PWREN (LCD Panel PWREN)
-GPIO97      -   BACKLIGHT_EN
-GPIO104     -   LCD_PWREN
-
-PWM   - Leave unconfigured for now...
----
-GPIO11  -   PWM0
-GPIO12  -   PWM1
-GPIO13  -   PWM2
-GPIO14  -   PWM3
-
-SD-CARD
--------
-GPIO18  -   SDDATA0
-GPIO19  -   SDDATA1
-GPIO20  -   SDDATA2
-GPIO21  -   SDDATA3
-GPIO22  -   SDCLK
-GPIO23  -   SDCMD
-GPIO72  -   SD_WP
-GPIO84  -   SD_nIRQ_CD  (SD-Card)
-
-I2C
----
-GPIO32  -   I2CSCL
-GPIO33  -   I2CSDA
-
-AC97
-----
-GPIO35  -   AC97_SDATA_IN
-GPIO37  -   AC97_SDATA_OUT
-GPIO38  -   AC97_SYNC
-GPIO39  -   AC97_BITCLK
-GPIO40  -   AC97_nRESET
-
-UART1
------
-GPIO41  -   UART_RXD1
-GPIO42  -   UART_TXD1
-GPIO43  -   UART_CTS1
-GPIO44  -   UART_DCD1
-GPIO45  -   UART_DSR1
-GPIO46  -   UART_nRI1
-GPIO47  -   UART_DTR1
-GPIO48  -   UART_RTS1
-
-UART2
------
-GPIO109 -   RTS2
-GPIO110 -   RXD2
-GPIO111 -   TXD2
-GPIO112 -   nCTS2
-
-UART3
------
-GPIO105 -   nCTS3
-GPIO106 -   nRTS3
-GPIO107 -   TXD3
-GPIO108 -   RXD3
-
-SSP3    - Leave unconfigured for now...
-----
-GPIO89  -   SSP3_CLK
-GPIO90  -   SSP3_SFRM
-GPIO91  -   SSP3_TXD
-GPIO92  -   SSP3_RXD
-
-SSP4
-GPIO93  -   SSP4_CLK
-GPIO94  -   SSP4_SFRM
-GPIO95  -   SSP4_TXD
-GPIO96  -   SSP4_RXD
-*/
-
-static mfp_cfg_t mfp_cfg[] __initdata = {
-	/* USB */
-	GPIO10_UTM_CLK,
-	GPIO49_U2D_PHYDATA_0,
-	GPIO50_U2D_PHYDATA_1,
-	GPIO51_U2D_PHYDATA_2,
-	GPIO52_U2D_PHYDATA_3,
-	GPIO53_U2D_PHYDATA_4,
-	GPIO54_U2D_PHYDATA_5,
-	GPIO55_U2D_PHYDATA_6,
-	GPIO56_U2D_PHYDATA_7,
-	GPIO58_UTM_RXVALID,
-	GPIO59_UTM_RXACTIVE,
-	GPIO60_U2D_RXERROR,
-	GPIO61_U2D_OPMODE0,
-	GPIO62_U2D_OPMODE1,
-	GPIO71_GPIO, /* USBD_INT */
-	GPIO73_UTM_TXREADY,
-	GPIO83_U2D_TXVALID,
-	GPIO98_U2D_RESET,
-	GPIO99_U2D_XCVR_SEL,
-	GPIO100_U2D_TERM_SEL,
-	GPIO101_U2D_SUSPEND,
-	GPIO102_UTM_LINESTATE_0,
-	GPIO103_UTM_LINESTATE_1,
-	GPIO4_2_GPIO | MFP_PULL_HIGH, /* UTM_PULLUP */
-
-	/* DM9000 */
-	GPIO1_GPIO,
-	GPIO9_GPIO,
-	GPIO36_GPIO,
-
-	/* AC97 */
-	GPIO35_AC97_SDATA_IN_0,
-	GPIO37_AC97_SDATA_OUT,
-	GPIO38_AC97_SYNC,
-	GPIO39_AC97_BITCLK,
-	GPIO40_AC97_nACRESET,
-
-	/* UARTS */
-	GPIO41_UART1_RXD,
-	GPIO42_UART1_TXD,
-	GPIO43_UART1_CTS,
-	GPIO44_UART1_DCD,
-	GPIO45_UART1_DSR,
-	GPIO46_UART1_RI,
-	GPIO47_UART1_DTR,
-	GPIO48_UART1_RTS,
-
-	GPIO109_UART2_RTS,
-	GPIO110_UART2_RXD,
-	GPIO111_UART2_TXD,
-	GPIO112_UART2_CTS,
-
-	GPIO105_UART3_CTS,
-	GPIO106_UART3_RTS,
-	GPIO107_UART3_TXD,
-	GPIO108_UART3_RXD,
-
-	GPIO78_GPIO,
-	GPIO79_GPIO,
-	GPIO80_GPIO,
-	GPIO81_GPIO,
-
-	/* I2C */
-	GPIO32_I2C_SCL,
-	GPIO33_I2C_SDA,
-
-	/* MMC */
-	GPIO18_MMC1_DAT0,
-	GPIO19_MMC1_DAT1,
-	GPIO20_MMC1_DAT2,
-	GPIO21_MMC1_DAT3,
-	GPIO22_MMC1_CLK,
-	GPIO23_MMC1_CMD,
-	GPIO72_GPIO | MFP_PULL_HIGH, /* Card Detect */
-	GPIO84_GPIO | MFP_PULL_LOW, /* Write Protect */
-
-	/* IRQ */
-	GPIO74_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ1 */
-	GPIO75_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ2 */
-	GPIO76_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ3 */
-	GPIO77_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ4 */
-	GPIO78_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ5 */
-	GPIO79_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ6 */
-	GPIO80_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ7 */
-	GPIO81_GPIO | MFP_LPM_EDGE_RISE  /* EXT_IRQ8 */
-};
-
-/* MMC/MCI Support */
-#if defined(CONFIG_MMC)
-static struct pxamci_platform_data mxm_8x10_mci_platform_data = {
-	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
-	.detect_delay_ms = 10,
-};
-
-static struct gpiod_lookup_table mxm_8x10_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		/* Card detect on GPIO 72 */
-		GPIO_LOOKUP("gpio-pxa", MXM_8X10_SD_nCD,
-			    "cd", GPIO_ACTIVE_LOW),
-		/* Write protect on GPIO 84 */
-		GPIO_LOOKUP("gpio-pxa", MXM_8X10_SD_WP,
-			    "wp", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-void __init mxm_8x10_mmc_init(void)
-{
-	gpiod_add_lookup_table(&mxm_8x10_mci_gpio_table);
-	pxa_set_mci_info(&mxm_8x10_mci_platform_data);
-}
-#endif
-
-/* USB Open Host Controller Interface */
-static struct pxaohci_platform_data mxm_8x10_ohci_platform_data = {
-	.port_mode = PMM_NPS_MODE,
-	.flags = ENABLE_PORT_ALL
-};
-
-void __init mxm_8x10_usb_host_init(void)
-{
-	pxa_set_ohci_info(&mxm_8x10_ohci_platform_data);
-}
-
-void __init mxm_8x10_ac97_init(void)
-{
-	pxa_set_ac97_info(NULL);
-}
-
-/* NAND flash Support */
-#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
-#define NAND_BLOCK_SIZE SZ_128K
-#define NB(x)           (NAND_BLOCK_SIZE * (x))
-static struct mtd_partition mxm_8x10_nand_partitions[] = {
-	[0] = {
-	       .name = "boot",
-	       .size = NB(0x002),
-	       .offset = NB(0x000),
-	       .mask_flags = MTD_WRITEABLE
-	},
-	[1] = {
-	       .name = "kernel",
-	       .size = NB(0x010),
-	       .offset = NB(0x002),
-	       .mask_flags = MTD_WRITEABLE
-	},
-	[2] = {
-	       .name = "root",
-	       .size = NB(0x36c),
-	       .offset = NB(0x012)
-	},
-	[3] = {
-	       .name = "bbt",
-	       .size = NB(0x082),
-	       .offset = NB(0x37e),
-	       .mask_flags = MTD_WRITEABLE
-	}
-};
-
-static struct pxa3xx_nand_platform_data mxm_8x10_nand_info = {
-	.keep_config	= 1,
-	.parts		= mxm_8x10_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(mxm_8x10_nand_partitions)
-};
-
-static void __init mxm_8x10_nand_init(void)
-{
-	pxa3xx_set_nand_info(&mxm_8x10_nand_info);
-}
-#else
-static inline void mxm_8x10_nand_init(void) {}
-#endif /* IS_ENABLED(CONFIG_MTD_NAND_MARVELL) */
-
-/* Ethernet support: Davicom DM9000 */
-static struct resource dm9k_resources[] = {
-	[0] = {
-	       .start = MXM_8X10_ETH_PHYS + 0x300,
-	       .end = MXM_8X10_ETH_PHYS + 0x300,
-	       .flags = IORESOURCE_MEM
-	},
-	[1] = {
-	       .start = MXM_8X10_ETH_PHYS + 0x308,
-	       .end = MXM_8X10_ETH_PHYS + 0x308,
-	       .flags = IORESOURCE_MEM
-	},
-	[2] = {
-	       .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO9)),
-	       .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO9)),
-	       .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE
-	}
-};
-
-static struct dm9000_plat_data dm9k_plat_data = {
-	.flags = DM9000_PLATF_16BITONLY
-};
-
-static struct platform_device dm9k_device = {
-	.name = "dm9000",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(dm9k_resources),
-	.resource = dm9k_resources,
-	.dev = {
-		.platform_data = &dm9k_plat_data
-	}
-};
-
-static void __init mxm_8x10_ethernet_init(void)
-{
-	platform_device_register(&dm9k_device);
-}
-
-/* PXA UARTs */
-static void __init mxm_8x10_uarts_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-}
-
-/* I2C and Real Time Clock */
-static struct i2c_board_info __initdata mxm_8x10_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("ds1337", 0x68)
-	}
-};
-
-static void __init mxm_8x10_i2c_init(void)
-{
-	i2c_register_board_info(0, mxm_8x10_i2c_devices,
-				ARRAY_SIZE(mxm_8x10_i2c_devices));
-	pxa_set_i2c_info(NULL);
-}
-
-void __init mxm_8x10_barebones_init(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_cfg));
-
-	mxm_8x10_uarts_init();
-	mxm_8x10_nand_init();
-	mxm_8x10_i2c_init();
-	mxm_8x10_ethernet_init();
-}
diff --git a/arch/arm/mach-pxa/mxm8x10.h b/arch/arm/mach-pxa/mxm8x10.h
deleted file mode 100644
index dcd32321c995..000000000000
--- a/arch/arm/mach-pxa/mxm8x10.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MACH_MXM_8X10_H
-#define __MACH_MXM_8X10_H
-
-#define MXM_8X10_ETH_PHYS	0x13000000
-
-#if defined(CONFIG_MMC)
-
-#define MXM_8X10_SD_nCD (72)
-#define MXM_8X10_SD_WP (84)
-
-extern void mxm_8x10_mmc_init(void);
-#else
-static inline void mxm_8x10_mmc_init(void) {}
-#endif
-
-extern void mxm_8x10_usb_host_init(void);
-extern void mxm_8x10_ac97_init(void);
-
-extern void mxm_8x10_barebones_init(void);
-
-#endif /* __MACH_MXM_8X10_H */
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
deleted file mode 100644
index 1a8d25eecac3..000000000000
--- a/arch/arm/mach-pxa/palm27x.c
+++ /dev/null
@@ -1,473 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Common code for Palm LD, T5, TX, Z72
- *
- * Copyright (C) 2010-2011 Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/pda_power.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx.h>
-#include <linux/power_supply.h>
-#include <linux/regulator/max1586.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "pxa27x.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include "udc.h"
-#include <linux/platform_data/asoc-palm27x.h>
-#include "palm27x.h"
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data palm27x_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.detect_delay_ms	= 200,
-};
-
-void __init palm27x_mmc_init(struct gpiod_lookup_table *gtable)
-{
-	if (gtable)
-		gpiod_add_lookup_table(gtable);
-	pxa_set_mci_info(&palm27x_mci_platform_data);
-}
-#endif
-
-/******************************************************************************
- * Power management - standby
- ******************************************************************************/
-#if defined(CONFIG_SUSPEND)
-void __init palm27x_pm_init(unsigned long str_base)
-{
-	static const unsigned long resume[] = {
-		0xe3a00101,	/* mov	r0,	#0x40000000 */
-		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
-		0xe590f008,	/* ldr	pc, [r0, #0x08] */
-	};
-
-	/*
-	 * Copy the bootloader.
-	 * NOTE: PalmZ72 uses a different wakeup method!
-	 */
-	memcpy(phys_to_virt(str_base), resume, sizeof(resume));
-}
-#endif
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-struct pxafb_mode_info palm_320x480_lcd_mode = {
-	.pixclock	= 57692,
-	.xres		= 320,
-	.yres		= 480,
-	.bpp		= 16,
-
-	.left_margin	= 32,
-	.right_margin	= 1,
-	.upper_margin	= 7,
-	.lower_margin	= 1,
-
-	.hsync_len	= 4,
-	.vsync_len	= 1,
-};
-
-struct pxafb_mode_info palm_320x320_lcd_mode = {
-	.pixclock	= 115384,
-	.xres		= 320,
-	.yres		= 320,
-	.bpp		= 16,
-
-	.left_margin	= 27,
-	.right_margin	= 7,
-	.upper_margin	= 7,
-	.lower_margin	= 8,
-
-	.hsync_len	= 6,
-	.vsync_len	= 1,
-};
-
-struct pxafb_mode_info palm_320x320_new_lcd_mode = {
-	.pixclock	= 86538,
-	.xres		= 320,
-	.yres		= 320,
-	.bpp		= 16,
-
-	.left_margin	= 20,
-	.right_margin	= 8,
-	.upper_margin	= 8,
-	.lower_margin	= 5,
-
-	.hsync_len	= 4,
-	.vsync_len	= 1,
-};
-
-static struct pxafb_mach_info palm27x_lcd_screen = {
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static int palm27x_lcd_power;
-static void palm27x_lcd_ctl(int on, struct fb_var_screeninfo *info)
-{
-	gpio_set_value(palm27x_lcd_power, on);
-}
-
-void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode)
-{
-	palm27x_lcd_screen.modes = mode;
-
-	if (gpio_is_valid(power)) {
-		if (!gpio_request(power, "LCD power")) {
-			pr_err("Palm27x: failed to claim lcd power gpio!\n");
-			return;
-		}
-		if (!gpio_direction_output(power, 1)) {
-			pr_err("Palm27x: lcd power configuration failed!\n");
-			return;
-		}
-		palm27x_lcd_power = power;
-		palm27x_lcd_screen.pxafb_lcd_power = palm27x_lcd_ctl;
-	}
-
-	pxa_set_fb_info(NULL, &palm27x_lcd_screen);
-}
-#endif
-
-/******************************************************************************
- * USB Gadget
- ******************************************************************************/
-#if	defined(CONFIG_USB_PXA27X) || \
-	defined(CONFIG_USB_PXA27X_MODULE)
-
-/* The actual GPIO offsets get filled in in the palm27x_udc_init() call */
-static struct gpiod_lookup_table palm27x_udc_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", 0,
-			    "vbus", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", 0,
-			    "pullup", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device palm27x_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-};
-
-void __init palm27x_udc_init(int vbus, int pullup, int vbus_inverted)
-{
-	palm27x_udc_gpiod_table.table[0].chip_hwnum = vbus;
-	palm27x_udc_gpiod_table.table[1].chip_hwnum = pullup;
-	if (vbus_inverted)
-		palm27x_udc_gpiod_table.table[0].flags = GPIO_ACTIVE_LOW;
-
-	gpiod_add_lookup_table(&palm27x_udc_gpiod_table);
-	platform_device_register(&palm27x_gpio_vbus);
-}
-#endif
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
-static struct pxaficp_platform_data palm27x_ficp_platform_data = {
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-void __init palm27x_irda_init(int pwdn)
-{
-	palm27x_ficp_platform_data.gpio_pwdown = pwdn;
-	pxa_set_ficp_info(&palm27x_ficp_platform_data);
-}
-#endif
-
-/******************************************************************************
- * WM97xx audio, battery
- ******************************************************************************/
-#if	defined(CONFIG_TOUCHSCREEN_WM97XX) || \
-	defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE)
-static struct wm97xx_batt_pdata palm27x_batt_pdata = {
-	.batt_aux	= WM97XX_AUX_ID3,
-	.temp_aux	= WM97XX_AUX_ID2,
-	.batt_mult	= 1000,
-	.batt_div	= 414,
-	.temp_mult	= 1,
-	.temp_div	= 1,
-	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
-	.batt_name	= "main-batt",
-};
-
-static struct wm97xx_pdata palm27x_wm97xx_pdata = {
-	.batt_pdata	= &palm27x_batt_pdata,
-};
-
-static pxa2xx_audio_ops_t palm27x_ac97_pdata = {
-	.codec_pdata	= { &palm27x_wm97xx_pdata, },
-};
-
-static struct palm27x_asoc_info palm27x_asoc_pdata = {
-	.jack_gpio	= -1,
-};
-
-static struct platform_device palm27x_asoc = {
-	.name = "palm27x-asoc",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &palm27x_asoc_pdata,
-	},
-};
-
-void __init palm27x_ac97_init(int minv, int maxv, int jack, int reset)
-{
-	palm27x_ac97_pdata.reset_gpio	= reset;
-	palm27x_asoc_pdata.jack_gpio	= jack;
-
-	if (minv < 0 || maxv < 0) {
-		palm27x_ac97_pdata.codec_pdata[0] = NULL;
-		pxa_set_ac97_info(&palm27x_ac97_pdata);
-	} else {
-		palm27x_batt_pdata.min_voltage	= minv,
-		palm27x_batt_pdata.max_voltage	= maxv,
-
-		pxa_set_ac97_info(&palm27x_ac97_pdata);
-		platform_device_register(&palm27x_asoc);
-	}
-}
-#endif
-
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
-static struct pwm_lookup palm27x_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 3500 * 1024,
-		   PWM_POLARITY_NORMAL),
-};
-
-static int palm_bl_power;
-static int palm_lcd_power;
-
-static int palm27x_backlight_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(palm_bl_power, "BL POWER");
-	if (ret)
-		goto err;
-	ret = gpio_direction_output(palm_bl_power, 0);
-	if (ret)
-		goto err2;
-
-	if (gpio_is_valid(palm_lcd_power)) {
-		ret = gpio_request(palm_lcd_power, "LCD POWER");
-		if (ret)
-			goto err2;
-		ret = gpio_direction_output(palm_lcd_power, 0);
-		if (ret)
-			goto err3;
-	}
-
-	return 0;
-err3:
-	gpio_free(palm_lcd_power);
-err2:
-	gpio_free(palm_bl_power);
-err:
-	return ret;
-}
-
-static int palm27x_backlight_notify(struct device *dev, int brightness)
-{
-	gpio_set_value(palm_bl_power, brightness);
-	if (gpio_is_valid(palm_lcd_power))
-		gpio_set_value(palm_lcd_power, brightness);
-	return brightness;
-}
-
-static void palm27x_backlight_exit(struct device *dev)
-{
-	gpio_free(palm_bl_power);
-	if (gpio_is_valid(palm_lcd_power))
-		gpio_free(palm_lcd_power);
-}
-
-static struct platform_pwm_backlight_data palm27x_backlight_data = {
-	.max_brightness	= 0xfe,
-	.dft_brightness	= 0x7e,
-	.init		= palm27x_backlight_init,
-	.notify		= palm27x_backlight_notify,
-	.exit		= palm27x_backlight_exit,
-};
-
-static struct platform_device palm27x_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &palm27x_backlight_data,
-	},
-};
-
-void __init palm27x_pwm_init(int bl, int lcd)
-{
-	palm_bl_power	= bl;
-	palm_lcd_power	= lcd;
-	pwm_add_table(palm27x_pwm_lookup, ARRAY_SIZE(palm27x_pwm_lookup));
-	platform_device_register(&palm27x_backlight);
-}
-#endif
-
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-#if defined(CONFIG_PDA_POWER) || defined(CONFIG_PDA_POWER_MODULE)
-static int palm_ac_state;
-static int palm_usb_state;
-
-static int palm27x_power_supply_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(palm_ac_state, "AC state");
-	if (ret)
-		goto err1;
-	ret = gpio_direction_input(palm_ac_state);
-	if (ret)
-		goto err2;
-
-	if (gpio_is_valid(palm_usb_state)) {
-		ret = gpio_request(palm_usb_state, "USB state");
-		if (ret)
-			goto err2;
-		ret = gpio_direction_input(palm_usb_state);
-		if (ret)
-			goto err3;
-	}
-
-	return 0;
-err3:
-	gpio_free(palm_usb_state);
-err2:
-	gpio_free(palm_ac_state);
-err1:
-	return ret;
-}
-
-static void palm27x_power_supply_exit(struct device *dev)
-{
-	gpio_free(palm_usb_state);
-	gpio_free(palm_ac_state);
-}
-
-static int palm27x_is_ac_online(void)
-{
-	return gpio_get_value(palm_ac_state);
-}
-
-static int palm27x_is_usb_online(void)
-{
-	return !gpio_get_value(palm_usb_state);
-}
-static char *palm27x_supplicants[] = {
-	"main-battery",
-};
-
-static struct pda_power_pdata palm27x_ps_info = {
-	.init			= palm27x_power_supply_init,
-	.exit			= palm27x_power_supply_exit,
-	.is_ac_online		= palm27x_is_ac_online,
-	.is_usb_online		= palm27x_is_usb_online,
-	.supplied_to		= palm27x_supplicants,
-	.num_supplicants	= ARRAY_SIZE(palm27x_supplicants),
-};
-
-static struct platform_device palm27x_power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &palm27x_ps_info,
-	},
-};
-
-void __init palm27x_power_init(int ac, int usb)
-{
-	palm_ac_state	= ac;
-	palm_usb_state	= usb;
-	platform_device_register(&palm27x_power_supply);
-}
-#endif
-
-/******************************************************************************
- * Core power regulator
- ******************************************************************************/
-#if defined(CONFIG_REGULATOR_MAX1586) || \
-    defined(CONFIG_REGULATOR_MAX1586_MODULE)
-static struct regulator_consumer_supply palm27x_max1587a_consumers[] = {
-	REGULATOR_SUPPLY("vcc_core", NULL),
-};
-
-static struct regulator_init_data palm27x_max1587a_v3_info = {
-	.constraints = {
-		.name		= "vcc_core range",
-		.min_uV		= 900000,
-		.max_uV		= 1705000,
-		.always_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.consumer_supplies	= palm27x_max1587a_consumers,
-	.num_consumer_supplies	= ARRAY_SIZE(palm27x_max1587a_consumers),
-};
-
-static struct max1586_subdev_data palm27x_max1587a_subdevs[] = {
-	{
-		.name		= "vcc_core",
-		.id		= MAX1586_V3,
-		.platform_data	= &palm27x_max1587a_v3_info,
-	}
-};
-
-static struct max1586_platform_data palm27x_max1587a_info = {
-	.subdevs     = palm27x_max1587a_subdevs,
-	.num_subdevs = ARRAY_SIZE(palm27x_max1587a_subdevs),
-	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
-};
-
-static struct i2c_board_info __initdata palm27x_pi2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("max1586", 0x14),
-		.platform_data	= &palm27x_max1587a_info,
-	},
-};
-
-static struct i2c_pxa_platform_data palm27x_i2c_power_info = {
-	.use_pio	= 1,
-};
-
-void __init palm27x_pmic_init(void)
-{
-	i2c_register_board_info(1, ARRAY_AND_SIZE(palm27x_pi2c_board_info));
-	pxa27x_set_i2c_power_info(&palm27x_i2c_power_info);
-}
-#endif
diff --git a/arch/arm/mach-pxa/palm27x.h b/arch/arm/mach-pxa/palm27x.h
deleted file mode 100644
index bd3075bbb3aa..000000000000
--- a/arch/arm/mach-pxa/palm27x.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Common functions for Palm LD, T5, TX, Z72
- *
- * Copyright (C) 2010
- * Marek Vasut <marek.vasut@gmail.com>
- */
-#ifndef	__INCLUDE_MACH_PALM27X__
-#define	__INCLUDE_MACH_PALM27X__
-
-#include <linux/gpio/machine.h>
-
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-extern void __init palm27x_mmc_init(struct gpiod_lookup_table *gtable);
-#else
-static inline void palm27x_mmc_init(struct gpiod_lookup_table *gtable)
-{}
-#endif
-
-#if defined(CONFIG_SUSPEND)
-extern void __init palm27x_pm_init(unsigned long str_base);
-#else
-static inline void palm27x_pm_init(unsigned long str_base) {}
-#endif
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-extern struct pxafb_mode_info palm_320x480_lcd_mode;
-extern struct pxafb_mode_info palm_320x320_lcd_mode;
-extern struct pxafb_mode_info palm_320x320_new_lcd_mode;
-extern void __init palm27x_lcd_init(int power,
-					struct pxafb_mode_info *mode);
-#else
-#define palm27x_lcd_init(power, mode)	do {} while (0)
-#endif
-
-#if	defined(CONFIG_USB_PXA27X) || \
-	defined(CONFIG_USB_PXA27X_MODULE)
-extern void __init palm27x_udc_init(int vbus, int pullup,
-					int vbus_inverted);
-#else
-static inline void palm27x_udc_init(int vbus, int pullup, int vbus_inverted) {}
-#endif
-
-#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
-extern void __init palm27x_irda_init(int pwdn);
-#else
-static inline void palm27x_irda_init(int pwdn) {}
-#endif
-
-#if	defined(CONFIG_TOUCHSCREEN_WM97XX) || \
-	defined(CONFIG_TOUCHSCREEN_WM97XX_MODULE)
-extern void __init palm27x_ac97_init(int minv, int maxv, int jack,
-					int reset);
-#else
-static inline void palm27x_ac97_init(int minv, int maxv, int jack, int reset) {}
-#endif
-
-#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
-extern void __init palm27x_pwm_init(int bl, int lcd);
-#else
-static inline void palm27x_pwm_init(int bl, int lcd) {}
-#endif
-
-#if defined(CONFIG_PDA_POWER) || defined(CONFIG_PDA_POWER_MODULE)
-extern void __init palm27x_power_init(int ac, int usb);
-#else
-static inline void palm27x_power_init(int ac, int usb) {}
-#endif
-
-#if defined(CONFIG_REGULATOR_MAX1586) || \
-    defined(CONFIG_REGULATOR_MAX1586_MODULE)
-extern void __init palm27x_pmic_init(void);
-#else
-static inline void palm27x_pmic_init(void) {}
-#endif
-
-#endif	/* __INCLUDE_MACH_PALM27X__ */
diff --git a/arch/arm/mach-pxa/palmld-pcmcia.c b/arch/arm/mach-pxa/palmld-pcmcia.c
deleted file mode 100644
index 720294a50864..000000000000
--- a/arch/arm/mach-pxa/palmld-pcmcia.c
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa2xx_palmld.c
- *
- * Driver for Palm LifeDrive PCMCIA
- *
- * Copyright (C) 2006 Alex Osborne <ato@meshy.org>
- * Copyright (C) 2007-2011 Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <pcmcia/soc_common.h>
-
-#include "palmld.h"
-
-static struct gpio palmld_pcmcia_gpios[] = {
-	{ GPIO_NR_PALMLD_PCMCIA_POWER,	GPIOF_INIT_LOW,	"PCMCIA Power" },
-	{ GPIO_NR_PALMLD_PCMCIA_RESET,	GPIOF_INIT_HIGH,"PCMCIA Reset" },
-};
-
-static int palmld_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	int ret;
-
-	ret = gpio_request_array(palmld_pcmcia_gpios,
-				ARRAY_SIZE(palmld_pcmcia_gpios));
-
-	skt->stat[SOC_STAT_RDY].gpio = GPIO_NR_PALMLD_PCMCIA_READY;
-	skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready";
-
-	return ret;
-}
-
-static void palmld_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
-	gpio_free_array(palmld_pcmcia_gpios, ARRAY_SIZE(palmld_pcmcia_gpios));
-}
-
-static void palmld_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-					struct pcmcia_state *state)
-{
-	state->detect = 1; /* always inserted */
-	state->vs_3v  = 1;
-	state->vs_Xv  = 0;
-}
-
-static int palmld_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-					const socket_state_t *state)
-{
-	gpio_set_value(GPIO_NR_PALMLD_PCMCIA_POWER, 1);
-	gpio_set_value(GPIO_NR_PALMLD_PCMCIA_RESET,
-			!!(state->flags & SS_RESET));
-
-	return 0;
-}
-
-static struct pcmcia_low_level palmld_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-
-	.first			= 1,
-	.nr			= 1,
-
-	.hw_init		= palmld_pcmcia_hw_init,
-	.hw_shutdown		= palmld_pcmcia_hw_shutdown,
-
-	.socket_state		= palmld_pcmcia_socket_state,
-	.configure_socket	= palmld_pcmcia_configure_socket,
-};
-
-static struct platform_device *palmld_pcmcia_device;
-
-static int __init palmld_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_palmld())
-		return -ENODEV;
-
-	palmld_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!palmld_pcmcia_device)
-		return -ENOMEM;
-
-	ret = platform_device_add_data(palmld_pcmcia_device, &palmld_pcmcia_ops,
-					sizeof(palmld_pcmcia_ops));
-
-	if (!ret)
-		ret = platform_device_add(palmld_pcmcia_device);
-
-	if (ret)
-		platform_device_put(palmld_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit palmld_pcmcia_exit(void)
-{
-	platform_device_unregister(palmld_pcmcia_device);
-}
-
-module_init(palmld_pcmcia_init);
-module_exit(palmld_pcmcia_exit);
-
-MODULE_AUTHOR("Alex Osborne <ato@meshy.org>,"
-	    " Marek Vasut <marek.vasut@gmail.com>");
-MODULE_DESCRIPTION("PCMCIA support for Palm LifeDrive");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
deleted file mode 100644
index 32308c63884e..000000000000
--- a/arch/arm/mach-pxa/palmld.c
+++ /dev/null
@@ -1,392 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hardware definitions for Palm LifeDrive
- *
- * Author:     Marek Vasut <marek.vasut@gmail.com>
- *
- * Based on work of:
- *		Alex Osborne <ato@meshy.org>
- *
- * (find more info at www.hackndev.com)
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx.h>
-#include <linux/power_supply.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "pxa27x.h"
-#include "palmld.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include <linux/platform_data/asoc-palm27x.h>
-#include "palm27x.h"
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long palmld_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO14_GPIO,	/* SD detect */
-	GPIO114_GPIO,	/* SD power */
-	GPIO116_GPIO,	/* SD r/o switch */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO89_AC97_SYSCLK,
-	GPIO95_AC97_nRESET,
-
-	/* IrDA */
-	GPIO108_GPIO,	/* ir disable */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* MATRIX KEYPAD */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* GPIO KEYS */
-	GPIO10_GPIO,	/* hotsync button */
-	GPIO12_GPIO,	/* power switch */
-	GPIO15_GPIO,	/* lock switch */
-
-	/* LEDs */
-	GPIO52_GPIO,	/* green led */
-	GPIO94_GPIO,	/* orange led */
-
-	/* PCMCIA */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO79_PSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO36_GPIO,	/* wifi power */
-	GPIO38_GPIO,	/* wifi ready */
-	GPIO81_GPIO,	/* wifi reset */
-
-	/* FFUART */
-	GPIO34_FFUART_RXD,
-	GPIO39_FFUART_TXD,
-
-	/* HDD */
-	GPIO98_GPIO,	/* HDD reset */
-	GPIO115_GPIO,	/* HDD power */
-
-	/* MISC */
-	GPIO13_GPIO,	/* earphone detect */
-};
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition palmld_partitions[] = {
-	{
-		.name		= "Flash",
-		.offset		= 0x00000000,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data palmld_flash_data[] = {
-	{
-		.width		= 2,			/* bankwidth in bytes */
-		.parts		= palmld_partitions,
-		.nr_parts	= ARRAY_SIZE(palmld_partitions)
-	}
-};
-
-static struct resource palmld_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_4M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device palmld_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= &palmld_flash_resource,
-	.num_resources	= 1,
-	.dev 		= {
-		.platform_data = palmld_flash_data,
-	},
-};
-
-static void __init palmld_nor_init(void)
-{
-	platform_device_register(&palmld_flash);
-}
-#else
-static inline void palmld_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static const unsigned int palmld_matrix_keys[] = {
-	KEY(0, 1, KEY_F2),
-	KEY(0, 2, KEY_UP),
-
-	KEY(1, 0, KEY_F3),
-	KEY(1, 1, KEY_F4),
-	KEY(1, 2, KEY_RIGHT),
-
-	KEY(2, 0, KEY_F1),
-	KEY(2, 1, KEY_F5),
-	KEY(2, 2, KEY_DOWN),
-
-	KEY(3, 0, KEY_F6),
-	KEY(3, 1, KEY_ENTER),
-	KEY(3, 2, KEY_LEFT),
-};
-
-static struct matrix_keymap_data palmld_matrix_keymap_data = {
-	.keymap			= palmld_matrix_keys,
-	.keymap_size		= ARRAY_SIZE(palmld_matrix_keys),
-};
-
-static struct pxa27x_keypad_platform_data palmld_keypad_platform_data = {
-	.matrix_key_rows	= 4,
-	.matrix_key_cols	= 3,
-	.matrix_keymap_data	= &palmld_matrix_keymap_data,
-
-	.debounce_interval	= 30,
-};
-
-static void __init palmld_kpc_init(void)
-{
-	pxa_set_keypad_info(&palmld_keypad_platform_data);
-}
-#else
-static inline void palmld_kpc_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button palmld_pxa_buttons[] = {
-	{KEY_F8, GPIO_NR_PALMLD_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
-	{KEY_F9, GPIO_NR_PALMLD_LOCK_SWITCH, 0, "Lock Switch" },
-	{KEY_POWER, GPIO_NR_PALMLD_POWER_SWITCH, 0, "Power Switch" },
-};
-
-static struct gpio_keys_platform_data palmld_pxa_keys_data = {
-	.buttons	= palmld_pxa_buttons,
-	.nbuttons	= ARRAY_SIZE(palmld_pxa_buttons),
-};
-
-static struct platform_device palmld_pxa_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmld_pxa_keys_data,
-	},
-};
-
-static void __init palmld_keys_init(void)
-{
-	platform_device_register(&palmld_pxa_keys);
-}
-#else
-static inline void palmld_keys_init(void) {}
-#endif
-
-/******************************************************************************
- * LEDs
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-struct gpio_led gpio_leds[] = {
-{
-	.name			= "palmld:green:led",
-	.default_trigger	= "none",
-	.gpio			= GPIO_NR_PALMLD_LED_GREEN,
-}, {
-	.name			= "palmld:amber:led",
-	.default_trigger	= "none",
-	.gpio			= GPIO_NR_PALMLD_LED_AMBER,
-},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device palmld_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_led_info,
-	}
-};
-
-static void __init palmld_leds_init(void)
-{
-	platform_device_register(&palmld_leds);
-}
-#else
-static inline void palmld_leds_init(void) {}
-#endif
-
-/******************************************************************************
- * HDD
- ******************************************************************************/
-#if defined(CONFIG_PATA_PALMLD) || defined(CONFIG_PATA_PALMLD_MODULE)
-static struct resource palmld_ide_resources[] = {
-	DEFINE_RES_MEM(PALMLD_IDE_PHYS, 0x1000),
-};
-
-static struct platform_device palmld_ide_device = {
-	.name		= "pata_palmld",
-	.id		= -1,
-	.resource	= palmld_ide_resources,
-	.num_resources	= ARRAY_SIZE(palmld_ide_resources),
-};
-
-static struct gpiod_lookup_table palmld_ide_gpio_table = {
-	.dev_id = "pata_palmld",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMLD_IDE_PWEN,
-			    "power", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMLD_IDE_RESET,
-			    "reset", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static void __init palmld_ide_init(void)
-{
-	gpiod_add_lookup_table(&palmld_ide_gpio_table);
-	platform_device_register(&palmld_ide_device);
-}
-#else
-static inline void palmld_ide_init(void) {}
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static struct map_desc palmld_io_desc[] __initdata = {
-{
-	.virtual	= PALMLD_IDE_VIRT,
-	.pfn		= __phys_to_pfn(PALMLD_IDE_PHYS),
-	.length		= PALMLD_IDE_SIZE,
-	.type		= MT_DEVICE
-},
-{
-	.virtual	= PALMLD_USB_VIRT,
-	.pfn		= __phys_to_pfn(PALMLD_USB_PHYS),
-	.length		= PALMLD_USB_SIZE,
-	.type		= MT_DEVICE
-},
-};
-
-static void __init palmld_map_io(void)
-{
-	pxa27x_map_io();
-	iotable_init(palmld_io_desc, ARRAY_SIZE(palmld_io_desc));
-}
-
-static struct gpiod_lookup_table palmld_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMLD_SD_DETECT_N,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMLD_SD_READONLY,
-			    "wp", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMLD_SD_POWER,
-			    "power", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table palmld_wm97xx_touch_gpio_table = {
-	.dev_id = "wm97xx-touch",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", 27, "touch", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static void __init palmld_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	palm27x_mmc_init(&palmld_mci_gpio_table);
-	gpiod_add_lookup_table(&palmld_wm97xx_touch_gpio_table);
-	palm27x_pm_init(PALMLD_STR_BASE);
-	palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
-	palm27x_irda_init(GPIO_NR_PALMLD_IR_DISABLE);
-	palm27x_ac97_init(PALMLD_BAT_MIN_VOLTAGE, PALMLD_BAT_MAX_VOLTAGE,
-			GPIO_NR_PALMLD_EARPHONE_DETECT, 95);
-	palm27x_pwm_init(GPIO_NR_PALMLD_BL_POWER, GPIO_NR_PALMLD_LCD_POWER);
-	palm27x_power_init(GPIO_NR_PALMLD_POWER_DETECT,
-			GPIO_NR_PALMLD_USB_DETECT_N);
-	palm27x_pmic_init();
-	palmld_kpc_init();
-	palmld_keys_init();
-	palmld_nor_init();
-	palmld_leds_init();
-	palmld_ide_init();
-}
-
-MACHINE_START(PALMLD, "Palm LifeDrive")
-	.atag_offset	= 0x100,
-	.map_io		= palmld_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= palmld_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/palmld.h b/arch/arm/mach-pxa/palmld.h
deleted file mode 100644
index 99a6d8b3a1e3..000000000000
--- a/arch/arm/mach-pxa/palmld.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * GPIOs and interrupts for Palm LifeDrive Handheld Computer
- *
- * Authors:	Alex Osborne <ato@meshy.org>
- *		Marek Vasut <marek.vasut@gmail.com>
- */
-
-#ifndef _INCLUDE_PALMLD_H_
-#define _INCLUDE_PALMLD_H_
-
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
-
-/** HERE ARE GPIOs **/
-
-/* GPIOs */
-#define GPIO_NR_PALMLD_GPIO_RESET	1
-#define GPIO_NR_PALMLD_POWER_DETECT	4
-#define GPIO_NR_PALMLD_HOTSYNC_BUTTON_N	10
-#define GPIO_NR_PALMLD_POWER_SWITCH	12
-#define GPIO_NR_PALMLD_EARPHONE_DETECT 	13
-#define GPIO_NR_PALMLD_LOCK_SWITCH	15
-
-/* SD/MMC */
-#define GPIO_NR_PALMLD_SD_DETECT_N	14
-#define GPIO_NR_PALMLD_SD_POWER		114
-#define GPIO_NR_PALMLD_SD_READONLY	116
-
-/* TOUCHSCREEN */
-#define GPIO_NR_PALMLD_WM9712_IRQ	27
-
-/* IRDA */
-#define GPIO_NR_PALMLD_IR_DISABLE	108
-
-/* LCD/BACKLIGHT */
-#define GPIO_NR_PALMLD_BL_POWER		19
-#define GPIO_NR_PALMLD_LCD_POWER	96
-
-/* LCD BORDER */
-#define GPIO_NR_PALMLD_BORDER_SWITCH	21
-#define GPIO_NR_PALMLD_BORDER_SELECT	22
-
-/* BLUETOOTH */
-#define GPIO_NR_PALMLD_BT_POWER		17
-#define GPIO_NR_PALMLD_BT_RESET		83
-
-/* PCMCIA (WiFi) */
-#define GPIO_NR_PALMLD_PCMCIA_READY	38
-#define GPIO_NR_PALMLD_PCMCIA_POWER	36
-#define GPIO_NR_PALMLD_PCMCIA_RESET	81
-
-/* LEDs */
-#define GPIO_NR_PALMLD_LED_GREEN	52
-#define GPIO_NR_PALMLD_LED_AMBER	94
-
-/* IDE */
-#define GPIO_NR_PALMLD_IDE_RESET	98
-#define GPIO_NR_PALMLD_IDE_PWEN		115
-
-/* USB */
-#define GPIO_NR_PALMLD_USB_DETECT_N	3
-#define GPIO_NR_PALMLD_USB_READY	86
-#define GPIO_NR_PALMLD_USB_RESET	88
-#define GPIO_NR_PALMLD_USB_INT		106
-#define GPIO_NR_PALMLD_USB_POWER	118
-/* 20, 53 and 86 are usb related too */
-
-/* INTERRUPTS */
-#define IRQ_GPIO_PALMLD_GPIO_RESET	PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_GPIO_RESET)
-#define IRQ_GPIO_PALMLD_SD_DETECT_N	PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_SD_DETECT_N)
-#define IRQ_GPIO_PALMLD_WM9712_IRQ	PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_WM9712_IRQ)
-#define IRQ_GPIO_PALMLD_IDE_IRQ		PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_IDE_IRQ)
-
-
-/** HERE ARE INIT VALUES **/
-
-/* IO mappings */
-#define PALMLD_USB_PHYS		PXA_CS2_PHYS
-#define PALMLD_USB_VIRT		0xf0000000
-#define PALMLD_USB_SIZE		0x00100000
-
-#define PALMLD_IDE_PHYS		0x20000000
-#define PALMLD_IDE_VIRT		0xf1000000
-#define PALMLD_IDE_SIZE		0x00100000
-
-#define PALMLD_PHYS_IO_START	0x40000000
-#define PALMLD_STR_BASE		0xa0200000
-
-/* BATTERY */
-#define PALMLD_BAT_MAX_VOLTAGE		4000	/* 4.00V maximum voltage */
-#define PALMLD_BAT_MIN_VOLTAGE		3550	/* 3.55V critical voltage */
-#define PALMLD_BAT_MAX_CURRENT		0	/* unknown */
-#define PALMLD_BAT_MIN_CURRENT		0	/* unknown */
-#define PALMLD_BAT_MAX_CHARGE		1	/* unknown */
-#define PALMLD_BAT_MIN_CHARGE		1	/* unknown */
-#define PALMLD_MAX_LIFE_MINS		240	/* on-life in minutes */
-
-#define PALMLD_BAT_MEASURE_DELAY	(HZ * 1)
-
-/* BACKLIGHT */
-#define PALMLD_MAX_INTENSITY		0xFE
-#define PALMLD_DEFAULT_INTENSITY	0x7E
-#define PALMLD_LIMIT_MASK		0x7F
-#define PALMLD_PRESCALER		0x3F
-#define PALMLD_PERIOD_NS		3500
-
-#endif
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
deleted file mode 100644
index 463b62ec1b01..000000000000
--- a/arch/arm/mach-pxa/palmt5.c
+++ /dev/null
@@ -1,234 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hardware definitions for Palm Tungsten|T5
- *
- * Author:	Marek Vasut <marek.vasut@gmail.com>
- *
- * Based on work of:
- *		Ales Snuparek <snuparek@atlas.cz>
- *		Justin Kendrick <twilightsentry@gmail.com>
- *		RichardT5 <richard_t5@users.sourceforge.net>
- *
- * (find more info at www.hackndev.com)
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/memblock.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx.h>
-#include <linux/power_supply.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "pxa27x.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include "palmt5.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include "udc.h"
-#include <linux/platform_data/asoc-palm27x.h>
-#include "palm27x.h"
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long palmt5_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO14_GPIO,	/* SD detect */
-	GPIO114_GPIO,	/* SD power */
-	GPIO115_GPIO,	/* SD r/o switch */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO89_AC97_SYSCLK,
-	GPIO95_AC97_nRESET,
-
-	/* IrDA */
-	GPIO40_GPIO,	/* ir disable */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* USB */
-	GPIO15_GPIO,	/* usb detect */
-	GPIO93_GPIO,	/* usb power */
-
-	/* MATRIX KEYPAD */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* FFUART */
-	GPIO34_FFUART_RXD,
-	GPIO39_FFUART_TXD,
-
-	/* MISC */
-	GPIO10_GPIO,	/* hotsync button */
-	GPIO90_GPIO,	/* power detect */
-	GPIO107_GPIO,	/* earphone detect */
-};
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static const unsigned int palmt5_matrix_keys[] = {
-	KEY(0, 0, KEY_POWER),
-	KEY(0, 1, KEY_F1),
-	KEY(0, 2, KEY_ENTER),
-
-	KEY(1, 0, KEY_F2),
-	KEY(1, 1, KEY_F3),
-	KEY(1, 2, KEY_F4),
-
-	KEY(2, 0, KEY_UP),
-	KEY(2, 2, KEY_DOWN),
-
-	KEY(3, 0, KEY_RIGHT),
-	KEY(3, 2, KEY_LEFT),
-};
-
-static struct matrix_keymap_data palmt5_matrix_keymap_data = {
-	.keymap			= palmt5_matrix_keys,
-	.keymap_size		= ARRAY_SIZE(palmt5_matrix_keys),
-};
-
-static struct pxa27x_keypad_platform_data palmt5_keypad_platform_data = {
-	.matrix_key_rows	= 4,
-	.matrix_key_cols	= 3,
-	.matrix_keymap_data	= &palmt5_matrix_keymap_data,
-
-	.debounce_interval	= 30,
-};
-
-static void __init palmt5_kpc_init(void)
-{
-	pxa_set_keypad_info(&palmt5_keypad_platform_data);
-}
-#else
-static inline void palmt5_kpc_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button palmt5_pxa_buttons[] = {
-	{KEY_F8, GPIO_NR_PALMT5_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
-};
-
-static struct gpio_keys_platform_data palmt5_pxa_keys_data = {
-	.buttons	= palmt5_pxa_buttons,
-	.nbuttons	= ARRAY_SIZE(palmt5_pxa_buttons),
-};
-
-static struct platform_device palmt5_pxa_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmt5_pxa_keys_data,
-	},
-};
-
-static void __init palmt5_keys_init(void)
-{
-	platform_device_register(&palmt5_pxa_keys);
-}
-#else
-static inline void palmt5_keys_init(void) {}
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init palmt5_reserve(void)
-{
-	memblock_reserve(0xa0200000, 0x1000);
-}
-
-static struct gpiod_lookup_table palmt5_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMT5_SD_DETECT_N,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMT5_SD_READONLY,
-			    "wp", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMT5_SD_POWER,
-			    "power", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table palmt5_wm97xx_touch_gpio_table = {
-	.dev_id = "wm97xx-touch",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", 27, "touch", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static void __init palmt5_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	palm27x_mmc_init(&palmt5_mci_gpio_table);
-	gpiod_add_lookup_table(&palmt5_wm97xx_touch_gpio_table);
-	palm27x_pm_init(PALMT5_STR_BASE);
-	palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
-	palm27x_udc_init(GPIO_NR_PALMT5_USB_DETECT_N,
-			GPIO_NR_PALMT5_USB_PULLUP, 1);
-	palm27x_irda_init(GPIO_NR_PALMT5_IR_DISABLE);
-	palm27x_ac97_init(PALMT5_BAT_MIN_VOLTAGE, PALMT5_BAT_MAX_VOLTAGE,
-			GPIO_NR_PALMT5_EARPHONE_DETECT, 95);
-	palm27x_pwm_init(GPIO_NR_PALMT5_BL_POWER, GPIO_NR_PALMT5_LCD_POWER);
-	palm27x_power_init(GPIO_NR_PALMT5_POWER_DETECT, -1);
-	palm27x_pmic_init();
-	palmt5_kpc_init();
-	palmt5_keys_init();
-}
-
-MACHINE_START(PALMT5, "Palm Tungsten|T5")
-	.atag_offset	= 0x100,
-	.map_io		= pxa27x_map_io,
-	.reserve	= palmt5_reserve,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= palmt5_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/palmt5.h b/arch/arm/mach-pxa/palmt5.h
deleted file mode 100644
index cf84aedca717..000000000000
--- a/arch/arm/mach-pxa/palmt5.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * GPIOs and interrupts for Palm Tungsten|T5 Handheld Computer
- *
- * Authors:	Ales Snuparek <snuparek@atlas.cz>
- *		Marek Vasut <marek.vasut@gmail.com>
- *		Justin Kendrick <twilightsentry@gmail.com>
- *		RichardT5 <richard_t5@users.sourceforge.net>
- */
-
-#ifndef _INCLUDE_PALMT5_H_
-#define _INCLUDE_PALMT5_H_
-
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
-
-/** HERE ARE GPIOs **/
-
-/* GPIOs */
-#define GPIO_NR_PALMT5_GPIO_RESET		1
-
-#define GPIO_NR_PALMT5_POWER_DETECT		90
-#define GPIO_NR_PALMT5_HOTSYNC_BUTTON_N		10
-#define GPIO_NR_PALMT5_EARPHONE_DETECT		107
-
-/* SD/MMC */
-#define GPIO_NR_PALMT5_SD_DETECT_N		14
-#define GPIO_NR_PALMT5_SD_POWER			114
-#define GPIO_NR_PALMT5_SD_READONLY		115
-
-/* TOUCHSCREEN */
-#define GPIO_NR_PALMT5_WM9712_IRQ		27
-
-/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
-#define GPIO_NR_PALMT5_IR_DISABLE		40
-
-/* USB */
-#define GPIO_NR_PALMT5_USB_DETECT_N		15
-#define GPIO_NR_PALMT5_USB_PULLUP		93
-
-/* LCD/BACKLIGHT */
-#define GPIO_NR_PALMT5_BL_POWER			84
-#define GPIO_NR_PALMT5_LCD_POWER		96
-
-/* BLUETOOTH */
-#define GPIO_NR_PALMT5_BT_POWER			17
-#define GPIO_NR_PALMT5_BT_RESET			83
-
-/* INTERRUPTS */
-#define IRQ_GPIO_PALMT5_SD_DETECT_N	PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_SD_DETECT_N)
-#define IRQ_GPIO_PALMT5_WM9712_IRQ	PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_WM9712_IRQ)
-#define IRQ_GPIO_PALMT5_USB_DETECT	PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_USB_DETECT)
-#define IRQ_GPIO_PALMT5_GPIO_RESET	PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_GPIO_RESET)
-
-/** HERE ARE INIT VALUES **/
-
-/* Various addresses  */
-#define PALMT5_PHYS_RAM_START	0xa0000000
-#define PALMT5_PHYS_IO_START	0x40000000
-#define PALMT5_STR_BASE		0xa0200000
-
-/* TOUCHSCREEN */
-#define AC97_LINK_FRAME		21
-
-/* BATTERY */
-#define PALMT5_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
-#define PALMT5_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
-#define PALMT5_BAT_MAX_CURRENT		0	/* unknown */
-#define PALMT5_BAT_MIN_CURRENT		0	/* unknown */
-#define PALMT5_BAT_MAX_CHARGE		1	/* unknown */
-#define PALMT5_BAT_MIN_CHARGE		1	/* unknown */
-#define PALMT5_MAX_LIFE_MINS		360    /* on-life in minutes */
-
-#define PALMT5_BAT_MEASURE_DELAY	(HZ * 1)
-
-/* BACKLIGHT */
-#define PALMT5_MAX_INTENSITY		0xFE
-#define PALMT5_DEFAULT_INTENSITY	0x7E
-#define PALMT5_LIMIT_MASK		0x7F
-#define PALMT5_PRESCALER		0x3F
-#define PALMT5_PERIOD_NS		3500
-
-#endif
diff --git a/arch/arm/mach-pxa/palmtc-pcmcia.c b/arch/arm/mach-pxa/palmtc-pcmcia.c
deleted file mode 100644
index 8e3f382343fe..000000000000
--- a/arch/arm/mach-pxa/palmtc-pcmcia.c
+++ /dev/null
@@ -1,162 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa2xx_palmtc.c
- *
- * Driver for Palm Tungsten|C PCMCIA
- *
- * Copyright (C) 2008 Alex Osborne <ato@meshy.org>
- * Copyright (C) 2009-2011 Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-
-#include <asm/mach-types.h>
-#include "palmtc.h"
-#include <pcmcia/soc_common.h>
-
-static struct gpio palmtc_pcmcia_gpios[] = {
-	{ GPIO_NR_PALMTC_PCMCIA_POWER1,	GPIOF_INIT_LOW,	"PCMCIA Power 1" },
-	{ GPIO_NR_PALMTC_PCMCIA_POWER2,	GPIOF_INIT_LOW,	"PCMCIA Power 2" },
-	{ GPIO_NR_PALMTC_PCMCIA_POWER3,	GPIOF_INIT_LOW,	"PCMCIA Power 3" },
-	{ GPIO_NR_PALMTC_PCMCIA_RESET,	GPIOF_INIT_HIGH,"PCMCIA Reset" },
-	{ GPIO_NR_PALMTC_PCMCIA_PWRREADY, GPIOF_IN,	"PCMCIA Power Ready" },
-};
-
-static int palmtc_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	int ret;
-
-	ret = gpio_request_array(palmtc_pcmcia_gpios,
-				ARRAY_SIZE(palmtc_pcmcia_gpios));
-
-	skt->stat[SOC_STAT_RDY].gpio = GPIO_NR_PALMTC_PCMCIA_READY;
-	skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready";
-
-	return ret;
-}
-
-static void palmtc_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
-	gpio_free_array(palmtc_pcmcia_gpios, ARRAY_SIZE(palmtc_pcmcia_gpios));
-}
-
-static void palmtc_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-					struct pcmcia_state *state)
-{
-	state->detect = 1; /* always inserted */
-	state->vs_3v  = 1;
-	state->vs_Xv  = 0;
-}
-
-static int palmtc_wifi_powerdown(void)
-{
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 1);
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER2, 0);
-	mdelay(40);
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER1, 0);
-	return 0;
-}
-
-static int palmtc_wifi_powerup(void)
-{
-	int timeout = 50;
-
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER3, 1);
-	mdelay(50);
-
-	/* Power up the card, 1.8V first, after a while 3.3V */
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER1, 1);
-	mdelay(100);
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER2, 1);
-
-	/* Wait till the card is ready */
-	while (!gpio_get_value(GPIO_NR_PALMTC_PCMCIA_PWRREADY) &&
-		timeout) {
-		mdelay(1);
-		timeout--;
-	}
-
-	/* Power down the WiFi in case of error */
-	if (!timeout) {
-		palmtc_wifi_powerdown();
-		return 1;
-	}
-
-	/* Reset the card */
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 1);
-	mdelay(20);
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 0);
-	mdelay(25);
-
-	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER3, 0);
-
-	return 0;
-}
-
-static int palmtc_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-					const socket_state_t *state)
-{
-	int ret = 1;
-
-	if (state->Vcc == 0)
-		ret = palmtc_wifi_powerdown();
-	else if (state->Vcc == 33)
-		ret = palmtc_wifi_powerup();
-
-	return ret;
-}
-
-static struct pcmcia_low_level palmtc_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-
-	.first			= 0,
-	.nr			= 1,
-
-	.hw_init		= palmtc_pcmcia_hw_init,
-	.hw_shutdown		= palmtc_pcmcia_hw_shutdown,
-
-	.socket_state		= palmtc_pcmcia_socket_state,
-	.configure_socket	= palmtc_pcmcia_configure_socket,
-};
-
-static struct platform_device *palmtc_pcmcia_device;
-
-static int __init palmtc_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_palmtc())
-		return -ENODEV;
-
-	palmtc_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!palmtc_pcmcia_device)
-		return -ENOMEM;
-
-	ret = platform_device_add_data(palmtc_pcmcia_device, &palmtc_pcmcia_ops,
-					sizeof(palmtc_pcmcia_ops));
-
-	if (!ret)
-		ret = platform_device_add(palmtc_pcmcia_device);
-
-	if (ret)
-		platform_device_put(palmtc_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit palmtc_pcmcia_exit(void)
-{
-	platform_device_unregister(palmtc_pcmcia_device);
-}
-
-module_init(palmtc_pcmcia_init);
-module_exit(palmtc_pcmcia_exit);
-
-MODULE_AUTHOR("Alex Osborne <ato@meshy.org>,"
-	    " Marek Vasut <marek.vasut@gmail.com>");
-MODULE_DESCRIPTION("PCMCIA support for Palm Tungsten|C");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
deleted file mode 100644
index 3054ffa397ad..000000000000
--- a/arch/arm/mach-pxa/palmtc.c
+++ /dev/null
@@ -1,539 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/palmtc.c
- *
- * Support for the Palm Tungsten|C
- *
- * Author:	Marek Vasut <marek.vasut@gmail.com>
- *
- * Based on work of:
- *		Petr Blaha <p3t3@centrum.cz>
- *		Chetan S. Kumar <shivakumar.chetan@gmail.com>
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/input.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio/machine.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/ucb1400.h>
-#include <linux/power_supply.h>
-#include <linux/gpio_keys.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "pxa25x.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include "palmtc.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include "udc.h"
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long palmtc_pin_config[] __initdata = {
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-	GPIO12_GPIO,	/* detect */
-	GPIO32_GPIO,	/* power */
-	GPIO54_GPIO,	/* r/o switch */
-
-	/* PCMCIA */
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO49_nPWE,
-	GPIO48_nPOE,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO57_nIOIS16,
-	GPIO56_nPWAIT,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* IrDA */
-	GPIO45_GPIO,	/* ir disable */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* PWM */
-	GPIO17_PWM1_OUT,
-
-	/* USB */
-	GPIO4_GPIO,	/* detect */
-	GPIO36_GPIO,	/* pullup */
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* MATRIX KEYPAD */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 0 */
-	GPIO9_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 1 */
-	GPIO10_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 2 */
-	GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 3 */
-	GPIO18_GPIO | MFP_LPM_DRIVE_LOW,	/* out 0 */
-	GPIO19_GPIO | MFP_LPM_DRIVE_LOW,	/* out 1 */
-	GPIO20_GPIO | MFP_LPM_DRIVE_LOW,	/* out 2 */
-	GPIO21_GPIO | MFP_LPM_DRIVE_LOW,	/* out 3 */
-	GPIO22_GPIO | MFP_LPM_DRIVE_LOW,	/* out 4 */
-	GPIO23_GPIO | MFP_LPM_DRIVE_LOW,	/* out 5 */
-	GPIO24_GPIO | MFP_LPM_DRIVE_LOW,	/* out 6 */
-	GPIO25_GPIO | MFP_LPM_DRIVE_LOW,	/* out 7 */
-	GPIO26_GPIO | MFP_LPM_DRIVE_LOW,	/* out 8 */
-	GPIO27_GPIO | MFP_LPM_DRIVE_LOW,	/* out 9 */
-	GPIO79_GPIO | MFP_LPM_DRIVE_LOW,	/* out 10 */
-	GPIO80_GPIO | MFP_LPM_DRIVE_LOW,	/* out 11 */
-
-	/* PXA GPIO KEYS */
-	GPIO7_GPIO | WAKEUP_ON_EDGE_BOTH,	/* hotsync button on cradle */
-
-	/* MISC */
-	GPIO1_RST,	/* reset */
-	GPIO2_GPIO,	/* earphone detect */
-	GPIO16_GPIO,	/* backlight switch */
-};
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data palmtc_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.detect_delay_ms	= 200,
-};
-
-static struct gpiod_lookup_table palmtc_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_SD_DETECT_N,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_SD_READONLY,
-			    "wp", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_SD_POWER,
-			    "power", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static void __init palmtc_mmc_init(void)
-{
-	gpiod_add_lookup_table(&palmtc_mci_gpio_table);
-	pxa_set_mci_info(&palmtc_mci_platform_data);
-}
-#else
-static inline void palmtc_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button palmtc_pxa_buttons[] = {
-	{KEY_F8, GPIO_NR_PALMTC_HOTSYNC_BUTTON, 1, "HotSync Button", EV_KEY, 1},
-};
-
-static struct gpio_keys_platform_data palmtc_pxa_keys_data = {
-	.buttons	= palmtc_pxa_buttons,
-	.nbuttons	= ARRAY_SIZE(palmtc_pxa_buttons),
-};
-
-static struct platform_device palmtc_pxa_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmtc_pxa_keys_data,
-	},
-};
-
-static void __init palmtc_keys_init(void)
-{
-	platform_device_register(&palmtc_pxa_keys);
-}
-#else
-static inline void palmtc_keys_init(void) {}
-#endif
-
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
-
-static struct gpiod_lookup_table palmtc_pwm_bl_gpio_table = {
-	.dev_id = "pwm-backlight.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_BL_POWER,
-			    "enable", GPIO_ACTIVE_HIGH),
-	},
-};
-
-static struct pwm_lookup palmtc_pwm_lookup[] = {
-	PWM_LOOKUP("pxa25x-pwm.1", 0, "pwm-backlight.0", NULL, PALMTC_PERIOD_NS,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data palmtc_backlight_data = {
-	.max_brightness	= PALMTC_MAX_INTENSITY,
-	.dft_brightness	= PALMTC_MAX_INTENSITY,
-};
-
-static struct platform_device palmtc_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa25x_device_pwm1.dev,
-		.platform_data	= &palmtc_backlight_data,
-	},
-};
-
-static void __init palmtc_pwm_init(void)
-{
-	gpiod_add_lookup_table(&palmtc_pwm_bl_gpio_table);
-	pwm_add_table(palmtc_pwm_lookup, ARRAY_SIZE(palmtc_pwm_lookup));
-	platform_device_register(&palmtc_backlight);
-}
-#else
-static inline void palmtc_pwm_init(void) {}
-#endif
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
-static struct pxaficp_platform_data palmtc_ficp_platform_data = {
-	.gpio_pwdown		= GPIO_NR_PALMTC_IR_DISABLE,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-static void __init palmtc_irda_init(void)
-{
-	pxa_set_ficp_info(&palmtc_ficp_platform_data);
-}
-#else
-static inline void palmtc_irda_init(void) {}
-#endif
-
-/******************************************************************************
- * Keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
-static const uint32_t palmtc_matrix_keys[] = {
-	KEY(0, 0, KEY_F1),
-	KEY(0, 1, KEY_X),
-	KEY(0, 2, KEY_POWER),
-	KEY(0, 3, KEY_TAB),
-	KEY(0, 4, KEY_A),
-	KEY(0, 5, KEY_Q),
-	KEY(0, 6, KEY_LEFTSHIFT),
-	KEY(0, 7, KEY_Z),
-	KEY(0, 8, KEY_S),
-	KEY(0, 9, KEY_W),
-	KEY(0, 10, KEY_E),
-	KEY(0, 11, KEY_UP),
-
-	KEY(1, 0, KEY_F2),
-	KEY(1, 1, KEY_DOWN),
-	KEY(1, 3, KEY_D),
-	KEY(1, 4, KEY_C),
-	KEY(1, 5, KEY_F),
-	KEY(1, 6, KEY_R),
-	KEY(1, 7, KEY_SPACE),
-	KEY(1, 8, KEY_V),
-	KEY(1, 9, KEY_G),
-	KEY(1, 10, KEY_T),
-	KEY(1, 11, KEY_LEFT),
-
-	KEY(2, 0, KEY_F3),
-	KEY(2, 1, KEY_LEFTCTRL),
-	KEY(2, 3, KEY_H),
-	KEY(2, 4, KEY_Y),
-	KEY(2, 5, KEY_N),
-	KEY(2, 6, KEY_J),
-	KEY(2, 7, KEY_U),
-	KEY(2, 8, KEY_M),
-	KEY(2, 9, KEY_K),
-	KEY(2, 10, KEY_I),
-	KEY(2, 11, KEY_RIGHT),
-
-	KEY(3, 0, KEY_F4),
-	KEY(3, 1, KEY_ENTER),
-	KEY(3, 3, KEY_DOT),
-	KEY(3, 4, KEY_L),
-	KEY(3, 5, KEY_O),
-	KEY(3, 6, KEY_LEFTALT),
-	KEY(3, 7, KEY_ENTER),
-	KEY(3, 8, KEY_BACKSPACE),
-	KEY(3, 9, KEY_P),
-	KEY(3, 10, KEY_B),
-	KEY(3, 11, KEY_FN),
-};
-
-const struct matrix_keymap_data palmtc_keymap_data = {
-	.keymap			= palmtc_matrix_keys,
-	.keymap_size		= ARRAY_SIZE(palmtc_matrix_keys),
-};
-
-static const unsigned int palmtc_keypad_row_gpios[] = {
-	0, 9, 10, 11
-};
-
-static const unsigned int palmtc_keypad_col_gpios[] = {
-	18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 79, 80
-};
-
-static struct matrix_keypad_platform_data palmtc_keypad_platform_data = {
-	.keymap_data	= &palmtc_keymap_data,
-	.row_gpios	= palmtc_keypad_row_gpios,
-	.num_row_gpios	= ARRAY_SIZE(palmtc_keypad_row_gpios),
-	.col_gpios	= palmtc_keypad_col_gpios,
-	.num_col_gpios	= ARRAY_SIZE(palmtc_keypad_col_gpios),
-	.active_low	= 1,
-
-	.debounce_ms		= 20,
-	.col_scan_delay_us	= 5,
-};
-
-static struct platform_device palmtc_keyboard = {
-	.name	= "matrix-keypad",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmtc_keypad_platform_data,
-	},
-};
-static void __init palmtc_mkp_init(void)
-{
-	platform_device_register(&palmtc_keyboard);
-}
-#else
-static inline void palmtc_mkp_init(void) {}
-#endif
-
-/******************************************************************************
- * UDC
- ******************************************************************************/
-#if defined(CONFIG_USB_PXA25X)||defined(CONFIG_USB_PXA25X_MODULE)
-static struct gpiod_lookup_table palmtc_udc_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_USB_DETECT_N,
-			    "vbus", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_USB_POWER,
-			    "pullup", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device palmtc_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-};
-
-static void __init palmtc_udc_init(void)
-{
-	gpiod_add_lookup_table(&palmtc_udc_gpiod_table);
-	platform_device_register(&palmtc_gpio_vbus);
-};
-#else
-static inline void palmtc_udc_init(void) {}
-#endif
-
-/******************************************************************************
- * Touchscreen / Battery / GPIO-extender
- ******************************************************************************/
-#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
-	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
-static struct platform_device palmtc_ucb1400_device = {
-	.name	= "ucb1400_core",
-	.id	= -1,
-};
-
-static void __init palmtc_ts_init(void)
-{
-	pxa_set_ac97_info(NULL);
-	platform_device_register(&palmtc_ucb1400_device);
-}
-#else
-static inline void palmtc_ts_init(void) {}
-#endif
-
-/******************************************************************************
- * LEDs
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-struct gpio_led palmtc_gpio_leds[] = {
-{
-	.name			= "palmtc:green:user",
-	.default_trigger	= "none",
-	.gpio			= GPIO_NR_PALMTC_LED_POWER,
-	.active_low		= 1,
-}, {
-	.name			= "palmtc:vibra:vibra",
-	.default_trigger	= "none",
-	.gpio			= GPIO_NR_PALMTC_VIBRA_POWER,
-	.active_low		= 1,
-}
-
-};
-
-static struct gpio_led_platform_data palmtc_gpio_led_info = {
-	.leds		= palmtc_gpio_leds,
-	.num_leds	= ARRAY_SIZE(palmtc_gpio_leds),
-};
-
-static struct platform_device palmtc_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &palmtc_gpio_led_info,
-	}
-};
-
-static void __init palmtc_leds_init(void)
-{
-	platform_device_register(&palmtc_leds);
-}
-#else
-static inline void palmtc_leds_init(void) {}
-#endif
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct resource palmtc_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_16M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct mtd_partition palmtc_flash_parts[] = {
-	{
-		.name	= "U-Boot Bootloader",
-		.offset	= 0x0,
-		.size	= 0x40000,
-	},
-	{
-		.name	= "Linux Kernel",
-		.offset	= 0x40000,
-		.size	= 0x2c0000,
-	},
-	{
-		.name	= "Filesystem",
-		.offset	= 0x300000,
-		.size	= 0xcc0000,
-	},
-	{
-		.name	= "U-Boot Environment",
-		.offset	= 0xfc0000,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data palmtc_flash_data = {
-	.width		= 4,
-	.parts		= palmtc_flash_parts,
-	.nr_parts	= ARRAY_SIZE(palmtc_flash_parts),
-};
-
-static struct platform_device palmtc_flash = {
-	.name		= "physmap-flash",
-	.id		= -1,
-	.resource	= &palmtc_flash_resource,
-	.num_resources	= 1,
-	.dev = {
-		.platform_data	= &palmtc_flash_data,
-	},
-};
-
-static void __init palmtc_nor_init(void)
-{
-	platform_device_register(&palmtc_flash);
-}
-#else
-static inline void palmtc_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info palmtc_lcd_modes[] = {
-	{
-		.pixclock	= 115384,
-		.xres		= 320,
-		.yres		= 320,
-		.bpp		= 16,
-
-		.left_margin	= 27,
-		.right_margin	= 7,
-		.upper_margin	= 7,
-		.lower_margin	= 8,
-
-		.hsync_len	= 6,
-		.vsync_len	= 1,
-	},
-};
-
-static struct pxafb_mach_info palmtc_lcd_screen = {
-	.modes			= palmtc_lcd_modes,
-	.num_modes		= ARRAY_SIZE(palmtc_lcd_modes),
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static void __init palmtc_lcd_init(void)
-{
-	pxa_set_fb_info(NULL, &palmtc_lcd_screen);
-}
-#else
-static inline void palmtc_lcd_init(void) {}
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init palmtc_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtc_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	pxa_set_hwuart_info(NULL);
-
-	palmtc_mmc_init();
-	palmtc_keys_init();
-	palmtc_pwm_init();
-	palmtc_irda_init();
-	palmtc_mkp_init();
-	palmtc_udc_init();
-	palmtc_ts_init();
-	palmtc_nor_init();
-	palmtc_lcd_init();
-	palmtc_leds_init();
-};
-
-MACHINE_START(PALMTC, "Palm Tungsten|C")
-	.atag_offset 	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= palmtc_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/palmtc.h b/arch/arm/mach-pxa/palmtc.h
deleted file mode 100644
index 9257a02c46e5..000000000000
--- a/arch/arm/mach-pxa/palmtc.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/include/asm-arm/arch-pxa/palmtc-gpio.h
- *
- * GPIOs and interrupts for Palm Tungsten|C Handheld Computer
- *
- * Authors:	Alex Osborne <bobofdoom@gmail.com>
- *		Marek Vasut <marek.vasut@gmail.com>
- *		Holger Bocklet <bitz.email@gmx.net>
- */
-
-#ifndef _INCLUDE_PALMTC_H_
-#define _INCLUDE_PALMTC_H_
-
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
-
-/** HERE ARE GPIOs **/
-
-/* GPIOs */
-#define GPIO_NR_PALMTC_EARPHONE_DETECT	2
-#define GPIO_NR_PALMTC_CRADLE_DETECT	5
-#define GPIO_NR_PALMTC_HOTSYNC_BUTTON	7
-
-/* SD/MMC */
-#define GPIO_NR_PALMTC_SD_DETECT_N	12
-#define GPIO_NR_PALMTC_SD_POWER		32
-#define GPIO_NR_PALMTC_SD_READONLY	54
-
-/* WLAN */
-#define GPIO_NR_PALMTC_PCMCIA_READY	13
-#define GPIO_NR_PALMTC_PCMCIA_PWRREADY	14
-#define GPIO_NR_PALMTC_PCMCIA_POWER1	15
-#define GPIO_NR_PALMTC_PCMCIA_POWER2	33
-#define GPIO_NR_PALMTC_PCMCIA_POWER3	55
-#define GPIO_NR_PALMTC_PCMCIA_RESET	78
-
-/* UDC */
-#define GPIO_NR_PALMTC_USB_DETECT_N	4
-#define GPIO_NR_PALMTC_USB_POWER	36
-
-/* LCD/BACKLIGHT */
-#define GPIO_NR_PALMTC_BL_POWER		16
-#define GPIO_NR_PALMTC_LCD_POWER	44
-#define GPIO_NR_PALMTC_LCD_BLANK	38
-
-/* UART */
-#define GPIO_NR_PALMTC_RS232_POWER	37
-
-/* IRDA */
-#define GPIO_NR_PALMTC_IR_DISABLE	45
-
-/* IRQs */
-#define IRQ_GPIO_PALMTC_SD_DETECT_N	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTC_SD_DETECT_N)
-#define IRQ_GPIO_PALMTC_WLAN_READY	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTC_WLAN_READY)
-
-/* UCB1400 GPIOs */
-#define GPIO_NR_PALMTC_POWER_DETECT	(0x80 | 0x00)
-#define GPIO_NR_PALMTC_HEADPHONE_DETECT	(0x80 | 0x01)
-#define GPIO_NR_PALMTC_SPEAKER_ENABLE	(0x80 | 0x03)
-#define GPIO_NR_PALMTC_VIBRA_POWER	(0x80 | 0x05)
-#define GPIO_NR_PALMTC_LED_POWER	(0x80 | 0x07)
-
-/** HERE ARE INIT VALUES **/
-#define PALMTC_UCB1400_GPIO_OFFSET	0x80
-
-/* BATTERY */
-#define PALMTC_BAT_MAX_VOLTAGE		4000	/* 4.00V maximum voltage */
-#define PALMTC_BAT_MIN_VOLTAGE		3550	/* 3.55V critical voltage */
-#define PALMTC_BAT_MAX_CURRENT		0	/* unknown */
-#define PALMTC_BAT_MIN_CURRENT		0	/* unknown */
-#define PALMTC_BAT_MAX_CHARGE		1	/* unknown */
-#define PALMTC_BAT_MIN_CHARGE		1	/* unknown */
-#define PALMTC_MAX_LIFE_MINS		240	/* on-life in minutes */
-
-#define PALMTC_BAT_MEASURE_DELAY	(HZ * 1)
-
-/* BACKLIGHT */
-#define PALMTC_MAX_INTENSITY		0xFE
-#define PALMTC_DEFAULT_INTENSITY	0x7E
-#define PALMTC_LIMIT_MASK		0x7F
-#define PALMTC_PRESCALER		0x3F
-#define PALMTC_PERIOD_NS		3500
-
-#endif
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
deleted file mode 100644
index fedac670a8af..000000000000
--- a/arch/arm/mach-pxa/palmte2.c
+++ /dev/null
@@ -1,383 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hardware definitions for Palm Tungsten|E2
- *
- * Author:
- *	Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com>
- *
- * Rewrite for mainline:
- *	Marek Vasut <marek.vasut@gmail.com>
- *
- * (find more info at www.hackndev.com)
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio/machine.h>
-#include <linux/input.h>
-#include <linux/pda_power.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx.h>
-#include <linux/power_supply.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "pxa25x.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include "palmte2.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include "udc.h"
-#include <linux/platform_data/asoc-palm27x.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long palmte2_pin_config[] __initdata = {
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-	GPIO10_GPIO,	/* SD detect */
-	GPIO55_GPIO,	/* SD power */
-	GPIO51_GPIO,	/* SD r/o switch */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* USB */
-	GPIO15_GPIO,	/* usb detect */
-	GPIO53_GPIO,	/* usb power */
-
-	/* IrDA */
-	GPIO48_GPIO,	/* ir disable */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* GPIO KEYS */
-	GPIO5_GPIO,	/* notes */
-	GPIO7_GPIO,	/* tasks */
-	GPIO11_GPIO,	/* calendar */
-	GPIO13_GPIO,	/* contacts */
-	GPIO14_GPIO,	/* center */
-	GPIO19_GPIO,	/* left */
-	GPIO20_GPIO,	/* right */
-	GPIO21_GPIO,	/* down */
-	GPIO22_GPIO,	/* up */
-
-	/* MISC */
-	GPIO1_RST,	/* reset */
-	GPIO4_GPIO,	/* Hotsync button */
-	GPIO9_GPIO,	/* power detect */
-	GPIO15_GPIO,	/* earphone detect */
-	GPIO37_GPIO,	/* LCD power */
-	GPIO56_GPIO,	/* Backlight power */
-};
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-static struct pxamci_platform_data palmte2_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-};
-
-static struct gpiod_lookup_table palmte2_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTE2_SD_DETECT_N,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTE2_SD_READONLY,
-			    "wp", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTE2_SD_POWER,
-			    "power", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-static struct gpio_keys_button palmte2_pxa_buttons[] = {
-	{KEY_F1,	GPIO_NR_PALMTE2_KEY_CONTACTS,	1, "Contacts" },
-	{KEY_F2,	GPIO_NR_PALMTE2_KEY_CALENDAR,	1, "Calendar" },
-	{KEY_F3,	GPIO_NR_PALMTE2_KEY_TASKS,	1, "Tasks" },
-	{KEY_F4,	GPIO_NR_PALMTE2_KEY_NOTES,	1, "Notes" },
-	{KEY_ENTER,	GPIO_NR_PALMTE2_KEY_CENTER,	1, "Center" },
-	{KEY_LEFT,	GPIO_NR_PALMTE2_KEY_LEFT,	1, "Left" },
-	{KEY_RIGHT,	GPIO_NR_PALMTE2_KEY_RIGHT,	1, "Right" },
-	{KEY_DOWN,	GPIO_NR_PALMTE2_KEY_DOWN,	1, "Down" },
-	{KEY_UP,	GPIO_NR_PALMTE2_KEY_UP,		1, "Up" },
-};
-
-static struct gpio_keys_platform_data palmte2_pxa_keys_data = {
-	.buttons	= palmte2_pxa_buttons,
-	.nbuttons	= ARRAY_SIZE(palmte2_pxa_buttons),
-};
-
-static struct platform_device palmte2_pxa_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmte2_pxa_keys_data,
-	},
-};
-#endif
-
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-static struct pwm_lookup palmte2_pwm_lookup[] = {
-	PWM_LOOKUP("pxa25x-pwm.0", 0, "pwm-backlight.0", NULL,
-		   PALMTE2_PERIOD_NS, PWM_POLARITY_NORMAL),
-};
-
-static struct gpio palmte_bl_gpios[] = {
-	{ GPIO_NR_PALMTE2_BL_POWER, GPIOF_INIT_LOW, "Backlight power" },
-	{ GPIO_NR_PALMTE2_LCD_POWER, GPIOF_INIT_LOW, "LCD power" },
-};
-
-static int palmte2_backlight_init(struct device *dev)
-{
-	return gpio_request_array(ARRAY_AND_SIZE(palmte_bl_gpios));
-}
-
-static int palmte2_backlight_notify(struct device *dev, int brightness)
-{
-	gpio_set_value(GPIO_NR_PALMTE2_BL_POWER, brightness);
-	gpio_set_value(GPIO_NR_PALMTE2_LCD_POWER, brightness);
-	return brightness;
-}
-
-static void palmte2_backlight_exit(struct device *dev)
-{
-	gpio_free_array(ARRAY_AND_SIZE(palmte_bl_gpios));
-}
-
-static struct platform_pwm_backlight_data palmte2_backlight_data = {
-	.max_brightness	= PALMTE2_MAX_INTENSITY,
-	.dft_brightness	= PALMTE2_MAX_INTENSITY,
-	.init		= palmte2_backlight_init,
-	.notify		= palmte2_backlight_notify,
-	.exit		= palmte2_backlight_exit,
-};
-
-static struct platform_device palmte2_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa25x_device_pwm0.dev,
-		.platform_data	= &palmte2_backlight_data,
-	},
-};
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data palmte2_ficp_platform_data = {
-	.gpio_pwdown		= GPIO_NR_PALMTE2_IR_DISABLE,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-/******************************************************************************
- * UDC
- ******************************************************************************/
-static struct gpiod_lookup_table palmte2_udc_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTE2_USB_DETECT_N,
-			    "vbus", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTE2_USB_PULLUP,
-			    "pullup", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device palmte2_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-};
-
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-static int power_supply_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMTE2_POWER_DETECT, "CABLE_STATE_AC");
-	if (ret)
-		goto err1;
-	ret = gpio_direction_input(GPIO_NR_PALMTE2_POWER_DETECT);
-	if (ret)
-		goto err2;
-
-	return 0;
-
-err2:
-	gpio_free(GPIO_NR_PALMTE2_POWER_DETECT);
-err1:
-	return ret;
-}
-
-static int palmte2_is_ac_online(void)
-{
-	return gpio_get_value(GPIO_NR_PALMTE2_POWER_DETECT);
-}
-
-static void power_supply_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMTE2_POWER_DETECT);
-}
-
-static char *palmte2_supplicants[] = {
-	"main-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init            = power_supply_init,
-	.is_ac_online    = palmte2_is_ac_online,
-	.exit            = power_supply_exit,
-	.supplied_to     = palmte2_supplicants,
-	.num_supplicants = ARRAY_SIZE(palmte2_supplicants),
-};
-
-static struct platform_device power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &power_supply_info,
-	},
-};
-
-/******************************************************************************
- * WM97xx audio, battery
- ******************************************************************************/
-static struct wm97xx_batt_pdata palmte2_batt_pdata = {
-	.batt_aux	= WM97XX_AUX_ID3,
-	.temp_aux	= WM97XX_AUX_ID2,
-	.max_voltage	= PALMTE2_BAT_MAX_VOLTAGE,
-	.min_voltage	= PALMTE2_BAT_MIN_VOLTAGE,
-	.batt_mult	= 1000,
-	.batt_div	= 414,
-	.temp_mult	= 1,
-	.temp_div	= 1,
-	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
-	.batt_name	= "main-batt",
-};
-
-static struct wm97xx_pdata palmte2_wm97xx_pdata = {
-	.batt_pdata	= &palmte2_batt_pdata,
-};
-
-static pxa2xx_audio_ops_t palmte2_ac97_pdata = {
-	.codec_pdata	= { &palmte2_wm97xx_pdata, },
-};
-
-static struct palm27x_asoc_info palmte2_asoc_pdata = {
-	.jack_gpio	= GPIO_NR_PALMTE2_EARPHONE_DETECT,
-};
-
-static struct platform_device palmte2_asoc = {
-	.name = "palm27x-asoc",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &palmte2_asoc_pdata,
-	},
-};
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-static struct pxafb_mode_info palmte2_lcd_modes[] = {
-{
-	.pixclock	= 77757,
-	.xres		= 320,
-	.yres		= 320,
-	.bpp		= 16,
-
-	.left_margin	= 28,
-	.right_margin	= 7,
-	.upper_margin	= 7,
-	.lower_margin	= 5,
-
-	.hsync_len	= 4,
-	.vsync_len	= 1,
-},
-};
-
-static struct pxafb_mach_info palmte2_lcd_screen = {
-	.modes		= palmte2_lcd_modes,
-	.num_modes	= ARRAY_SIZE(palmte2_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static struct platform_device *devices[] __initdata = {
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-	&palmte2_pxa_keys,
-#endif
-	&palmte2_backlight,
-	&power_supply,
-	&palmte2_asoc,
-	&palmte2_gpio_vbus,
-};
-
-/* setup udc GPIOs initial state */
-static void __init palmte2_udc_init(void)
-{
-	if (!gpio_request(GPIO_NR_PALMTE2_USB_PULLUP, "UDC Vbus")) {
-		gpio_direction_output(GPIO_NR_PALMTE2_USB_PULLUP, 1);
-		gpio_free(GPIO_NR_PALMTE2_USB_PULLUP);
-	}
-}
-
-static void __init palmte2_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmte2_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa_set_fb_info(NULL, &palmte2_lcd_screen);
-	gpiod_add_lookup_table(&palmte2_mci_gpio_table);
-	pxa_set_mci_info(&palmte2_mci_platform_data);
-	palmte2_udc_init();
-	pxa_set_ac97_info(&palmte2_ac97_pdata);
-	pxa_set_ficp_info(&palmte2_ficp_platform_data);
-
-	pwm_add_table(palmte2_pwm_lookup, ARRAY_SIZE(palmte2_pwm_lookup));
-	gpiod_add_lookup_table(&palmte2_udc_gpiod_table);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-MACHINE_START(PALMTE2, "Palm Tungsten|E2")
-	.atag_offset	= 0x100,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= palmte2_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/palmte2.h b/arch/arm/mach-pxa/palmte2.h
deleted file mode 100644
index 2589400c1a2f..000000000000
--- a/arch/arm/mach-pxa/palmte2.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * GPIOs and interrupts for Palm Tungsten|E2 Handheld Computer
- *
- * Author:
- *		Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com>
- */
-
-#ifndef _INCLUDE_PALMTE2_H_
-#define _INCLUDE_PALMTE2_H_
-
-/** HERE ARE GPIOs **/
-
-/* GPIOs */
-#define GPIO_NR_PALMTE2_POWER_DETECT		9
-#define GPIO_NR_PALMTE2_HOTSYNC_BUTTON_N	4
-#define GPIO_NR_PALMTE2_EARPHONE_DETECT		15
-
-/* SD/MMC */
-#define GPIO_NR_PALMTE2_SD_DETECT_N		10
-#define GPIO_NR_PALMTE2_SD_POWER		55
-#define GPIO_NR_PALMTE2_SD_READONLY		51
-
-/* IRDA -  disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
-#define GPIO_NR_PALMTE2_IR_DISABLE		48
-
-/* USB */
-#define GPIO_NR_PALMTE2_USB_DETECT_N		35
-#define GPIO_NR_PALMTE2_USB_PULLUP		53
-
-/* LCD/BACKLIGHT */
-#define GPIO_NR_PALMTE2_BL_POWER		56
-#define GPIO_NR_PALMTE2_LCD_POWER		37
-
-/* KEYS */
-#define GPIO_NR_PALMTE2_KEY_NOTES	5
-#define GPIO_NR_PALMTE2_KEY_TASKS	7
-#define GPIO_NR_PALMTE2_KEY_CALENDAR	11
-#define GPIO_NR_PALMTE2_KEY_CONTACTS	13
-#define GPIO_NR_PALMTE2_KEY_CENTER	14
-#define GPIO_NR_PALMTE2_KEY_LEFT	19
-#define GPIO_NR_PALMTE2_KEY_RIGHT	20
-#define GPIO_NR_PALMTE2_KEY_DOWN	21
-#define GPIO_NR_PALMTE2_KEY_UP		22
-
-/** HERE ARE INIT VALUES **/
-
-/* BACKLIGHT */
-#define PALMTE2_MAX_INTENSITY		0xFE
-#define PALMTE2_DEFAULT_INTENSITY	0x7E
-#define PALMTE2_LIMIT_MASK		0x7F
-#define PALMTE2_PRESCALER		0x3F
-#define PALMTE2_PERIOD_NS		3500
-
-/* BATTERY */
-#define PALMTE2_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
-#define PALMTE2_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
-#define PALMTE2_BAT_MAX_CURRENT		0	/* unknown */
-#define PALMTE2_BAT_MIN_CURRENT		0	/* unknown */
-#define PALMTE2_BAT_MAX_CHARGE		1	/* unknown */
-#define PALMTE2_BAT_MIN_CHARGE		1	/* unknown */
-#define PALMTE2_MAX_LIFE_MINS		360	/* on-life in minutes */
-
-#endif
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
deleted file mode 100644
index 238a31f32cba..000000000000
--- a/arch/arm/mach-pxa/palmtreo.c
+++ /dev/null
@@ -1,548 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hardware definitions for Palm Treo smartphones
- *
- * currently supported:
- *     Palm Treo 680 (GSM)
- *     Palm Centro 685 (GSM)
- *
- * Author:     Tomas Cech <sleep_walker@suse.cz>
- *
- * (find more info at www.hackndev.com)
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/memblock.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/power_supply.h>
-#include <linux/w1-gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "pxa27x.h"
-#include "pxa27x-udc.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include "palmtreo.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include "udc.h"
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include "pxa2xx-regs.h"
-#include <linux/platform_data/asoc-palm27x.h>
-#include <linux/platform_data/media/camera-pxa.h>
-#include "palm27x.h"
-
-#include <sound/pxa2xx-lib.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long treo_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO113_GPIO,				/* SD detect */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO89_AC97_SYSCLK,
-	GPIO95_AC97_nRESET,
-
-	/* IrDA */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* USB */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,	/* usb detect */
-
-	/* MATRIX KEYPAD */
-	GPIO101_KP_MKIN_1,
-	GPIO102_KP_MKIN_2,
-	GPIO97_KP_MKIN_3,
-	GPIO98_KP_MKIN_4,
-	GPIO91_KP_MKIN_6,
-	GPIO13_KP_MKIN_7,
-	GPIO103_KP_MKOUT_0 | MFP_LPM_DRIVE_HIGH,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-	GPIO96_KP_MKOUT_6,
-	GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,	/* Hotsync button */
-
-	/* Quick Capture Interface */
-	GPIO84_CIF_FV,
-	GPIO85_CIF_LV,
-	GPIO53_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO81_CIF_DD_0,
-	GPIO55_CIF_DD_1,
-	GPIO51_CIF_DD_2,
-	GPIO50_CIF_DD_3,
-	GPIO52_CIF_DD_4,
-	GPIO48_CIF_DD_5,
-	GPIO17_CIF_DD_6,
-	GPIO12_CIF_DD_7,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* GSM */
-	GPIO14_GPIO | WAKEUP_ON_EDGE_BOTH,	/* GSM host wake up */
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-	GPIO39_FFUART_TXD,
-	GPIO41_FFUART_RTS,
-
-	/* MISC. */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,	/* external power detect */
-	GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,	/* silent switch */
-	GPIO116_GPIO,				/* headphone detect */
-	GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH,	/* bluetooth host wake up */
-};
-
-#ifdef CONFIG_MACH_TREO680
-static unsigned long treo680_pin_config[] __initdata = {
-	GPIO33_GPIO,    /* SD read only */
-
-	/* MATRIX KEYPAD - different wake up source */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO99_KP_MKIN_5,
-
-	/* LCD... L_BIAS alt fn not configured on Treo680; is GPIO instead */
-	GPIOxx_LCD_16BPP,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-};
-#endif /* CONFIG_MACH_TREO680 */
-
-#ifdef CONFIG_MACH_CENTRO
-static unsigned long centro685_pin_config[] __initdata = {
-	/* Bluetooth attached to BT UART*/
-	MFP_CFG_OUT(GPIO80, AF0, DRIVE_LOW),    /* power: LOW = off */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* MATRIX KEYPAD - different wake up source */
-	GPIO100_KP_MKIN_0,
-	GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-};
-#endif /* CONFIG_MACH_CENTRO */
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-#if IS_ENABLED(CONFIG_KEYBOARD_PXA27x)
-static const unsigned int treo680_matrix_keys[] = {
-	KEY(0, 0, KEY_F8),		/* Red/Off/Power */
-	KEY(0, 1, KEY_LEFT),
-	KEY(0, 2, KEY_LEFTCTRL),	/* Alternate */
-	KEY(0, 3, KEY_L),
-	KEY(0, 4, KEY_A),
-	KEY(0, 5, KEY_Q),
-	KEY(0, 6, KEY_P),
-
-	KEY(1, 0, KEY_RIGHTCTRL),	/* Menu */
-	KEY(1, 1, KEY_RIGHT),
-	KEY(1, 2, KEY_LEFTSHIFT),	/* Left shift */
-	KEY(1, 3, KEY_Z),
-	KEY(1, 4, KEY_S),
-	KEY(1, 5, KEY_W),
-
-	KEY(2, 0, KEY_F1),		/* Phone */
-	KEY(2, 1, KEY_UP),
-	KEY(2, 2, KEY_0),
-	KEY(2, 3, KEY_X),
-	KEY(2, 4, KEY_D),
-	KEY(2, 5, KEY_E),
-
-	KEY(3, 0, KEY_F10),		/* Calendar */
-	KEY(3, 1, KEY_DOWN),
-	KEY(3, 2, KEY_SPACE),
-	KEY(3, 3, KEY_C),
-	KEY(3, 4, KEY_F),
-	KEY(3, 5, KEY_R),
-
-	KEY(4, 0, KEY_F12),		/* Mail */
-	KEY(4, 1, KEY_KPENTER),
-	KEY(4, 2, KEY_RIGHTALT),	/* Alt */
-	KEY(4, 3, KEY_V),
-	KEY(4, 4, KEY_G),
-	KEY(4, 5, KEY_T),
-
-	KEY(5, 0, KEY_F9),		/* Home */
-	KEY(5, 1, KEY_PAGEUP),		/* Side up */
-	KEY(5, 2, KEY_DOT),
-	KEY(5, 3, KEY_B),
-	KEY(5, 4, KEY_H),
-	KEY(5, 5, KEY_Y),
-
-	KEY(6, 0, KEY_TAB),		/* Side Activate */
-	KEY(6, 1, KEY_PAGEDOWN),	/* Side down */
-	KEY(6, 2, KEY_ENTER),
-	KEY(6, 3, KEY_N),
-	KEY(6, 4, KEY_J),
-	KEY(6, 5, KEY_U),
-
-	KEY(7, 0, KEY_F6),		/* Green/Call */
-	KEY(7, 1, KEY_O),
-	KEY(7, 2, KEY_BACKSPACE),
-	KEY(7, 3, KEY_M),
-	KEY(7, 4, KEY_K),
-	KEY(7, 5, KEY_I),
-};
-
-static const unsigned int centro_matrix_keys[] = {
-	KEY(0, 0, KEY_F9),		/* Home */
-	KEY(0, 1, KEY_LEFT),
-	KEY(0, 2, KEY_LEFTCTRL),	/* Alternate */
-	KEY(0, 3, KEY_L),
-	KEY(0, 4, KEY_A),
-	KEY(0, 5, KEY_Q),
-	KEY(0, 6, KEY_P),
-
-	KEY(1, 0, KEY_RIGHTCTRL),	/* Menu */
-	KEY(1, 1, KEY_RIGHT),
-	KEY(1, 2, KEY_LEFTSHIFT),	/* Left shift */
-	KEY(1, 3, KEY_Z),
-	KEY(1, 4, KEY_S),
-	KEY(1, 5, KEY_W),
-
-	KEY(2, 0, KEY_F1),		/* Phone */
-	KEY(2, 1, KEY_UP),
-	KEY(2, 2, KEY_0),
-	KEY(2, 3, KEY_X),
-	KEY(2, 4, KEY_D),
-	KEY(2, 5, KEY_E),
-
-	KEY(3, 0, KEY_F10),		/* Calendar */
-	KEY(3, 1, KEY_DOWN),
-	KEY(3, 2, KEY_SPACE),
-	KEY(3, 3, KEY_C),
-	KEY(3, 4, KEY_F),
-	KEY(3, 5, KEY_R),
-
-	KEY(4, 0, KEY_F12),		/* Mail */
-	KEY(4, 1, KEY_KPENTER),
-	KEY(4, 2, KEY_RIGHTALT),	/* Alt */
-	KEY(4, 3, KEY_V),
-	KEY(4, 4, KEY_G),
-	KEY(4, 5, KEY_T),
-
-	KEY(5, 0, KEY_F8),		/* Red/Off/Power */
-	KEY(5, 1, KEY_PAGEUP),		/* Side up */
-	KEY(5, 2, KEY_DOT),
-	KEY(5, 3, KEY_B),
-	KEY(5, 4, KEY_H),
-	KEY(5, 5, KEY_Y),
-
-	KEY(6, 0, KEY_TAB),		/* Side Activate */
-	KEY(6, 1, KEY_PAGEDOWN),	/* Side down */
-	KEY(6, 2, KEY_ENTER),
-	KEY(6, 3, KEY_N),
-	KEY(6, 4, KEY_J),
-	KEY(6, 5, KEY_U),
-
-	KEY(7, 0, KEY_F6),		/* Green/Call */
-	KEY(7, 1, KEY_O),
-	KEY(7, 2, KEY_BACKSPACE),
-	KEY(7, 3, KEY_M),
-	KEY(7, 4, KEY_K),
-	KEY(7, 5, KEY_I),
-};
-
-static struct matrix_keymap_data treo680_matrix_keymap_data = {
-	.keymap			= treo680_matrix_keys,
-	.keymap_size		= ARRAY_SIZE(treo680_matrix_keys),
-};
-
-static struct matrix_keymap_data centro_matrix_keymap_data = {
-	.keymap			= centro_matrix_keys,
-	.keymap_size		= ARRAY_SIZE(centro_matrix_keys),
-};
-
-static struct pxa27x_keypad_platform_data treo680_keypad_pdata = {
-	.matrix_key_rows	= 8,
-	.matrix_key_cols	= 7,
-	.matrix_keymap_data	= &treo680_matrix_keymap_data,
-	.direct_key_map		= { KEY_CONNECT },
-	.direct_key_num		= 1,
-
-	.debounce_interval	= 30,
-};
-
-static void __init palmtreo_kpc_init(void)
-{
-	static struct pxa27x_keypad_platform_data *data = &treo680_keypad_pdata;
-
-	if (machine_is_centro())
-		data->matrix_keymap_data = &centro_matrix_keymap_data;
-
-	pxa_set_keypad_info(&treo680_keypad_pdata);
-}
-#else
-static inline void palmtreo_kpc_init(void) {}
-#endif
-
-/******************************************************************************
- * USB host
- ******************************************************************************/
-#if IS_ENABLED(CONFIG_USB_OHCI_HCD)
-static struct pxaohci_platform_data treo680_ohci_info = {
-	.port_mode    = PMM_PERPORT_MODE,
-	.flags        = ENABLE_PORT1 | ENABLE_PORT3,
-	.power_budget = 0,
-};
-
-static void __init palmtreo_uhc_init(void)
-{
-	if (machine_is_treo680())
-		pxa_set_ohci_info(&treo680_ohci_info);
-}
-#else
-static inline void palmtreo_uhc_init(void) {}
-#endif
-
-/******************************************************************************
- * Vibra and LEDs
- ******************************************************************************/
-static struct gpio_led treo680_gpio_leds[] = {
-	{
-		.name			= "treo680:vibra:vibra",
-		.default_trigger	= "none",
-		.gpio			= GPIO_NR_TREO680_VIBRATE_EN,
-	},
-	{
-		.name			= "treo680:green:led",
-		.default_trigger	= "mmc0",
-		.gpio			= GPIO_NR_TREO_GREEN_LED,
-	},
-	{
-		.name			= "treo680:white:keybbl",
-		.default_trigger	= "none",
-		.gpio			= GPIO_NR_TREO680_KEYB_BL,
-	},
-};
-
-static struct gpio_led_platform_data treo680_gpio_led_info = {
-	.leds		= treo680_gpio_leds,
-	.num_leds	= ARRAY_SIZE(treo680_gpio_leds),
-};
-
-static struct gpio_led centro_gpio_leds[] = {
-	{
-		.name			= "centro:vibra:vibra",
-		.default_trigger	= "none",
-		.gpio			= GPIO_NR_CENTRO_VIBRATE_EN,
-	},
-	{
-		.name			= "centro:green:led",
-		.default_trigger	= "mmc0",
-		.gpio			= GPIO_NR_TREO_GREEN_LED,
-	},
-	{
-		.name			= "centro:white:keybbl",
-		.default_trigger	= "none",
-		.active_low		= 1,
-		.gpio			= GPIO_NR_CENTRO_KEYB_BL,
-	},
-};
-
-static struct gpio_led_platform_data centro_gpio_led_info = {
-	.leds		= centro_gpio_leds,
-	.num_leds	= ARRAY_SIZE(centro_gpio_leds),
-};
-
-static struct platform_device palmtreo_leds = {
-	.name   = "leds-gpio",
-	.id     = -1,
-};
-
-static void __init palmtreo_leds_init(void)
-{
-	if (machine_is_centro())
-		palmtreo_leds.dev.platform_data = &centro_gpio_led_info;
-	else if (machine_is_treo680())
-		palmtreo_leds.dev.platform_data = &treo680_gpio_led_info;
-
-	platform_device_register(&palmtreo_leds);
-}
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init treo_reserve(void)
-{
-	memblock_reserve(0xa0000000, 0x1000);
-	memblock_reserve(0xa2000000, 0x1000);
-}
-
-static void __init palmphone_common_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(treo_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	palm27x_pm_init(TREO_STR_BASE);
-	palm27x_lcd_init(GPIO_NR_TREO_BL_POWER, &palm_320x320_new_lcd_mode);
-	palm27x_udc_init(GPIO_NR_TREO_USB_DETECT, GPIO_NR_TREO_USB_PULLUP, 1);
-	palm27x_irda_init(GPIO_NR_TREO_IR_EN);
-	palm27x_ac97_init(-1, -1, -1, 95);
-	palm27x_pwm_init(GPIO_NR_TREO_BL_POWER, -1);
-	palm27x_power_init(GPIO_NR_TREO_POWER_DETECT, -1);
-	palm27x_pmic_init();
-	palmtreo_kpc_init();
-	palmtreo_uhc_init();
-	palmtreo_leds_init();
-}
-
-#ifdef CONFIG_MACH_TREO680
-void __init treo680_gpio_init(void)
-{
-	unsigned int gpio;
-
-	/* drive all three lcd gpios high initially */
-	const unsigned long lcd_flags = GPIOF_INIT_HIGH | GPIOF_DIR_OUT;
-
-	/*
-	 * LCD GPIO initialization...
-	 */
-
-	/*
-	 * This is likely the power to the lcd.  Toggling it low/high appears to
-	 * turn the lcd off/on.  Can be toggled after lcd is initialized without
-	 * any apparent adverse effects to the lcd operation.  Note that this
-	 * gpio line is used by the lcd controller as the L_BIAS signal, but
-	 * treo680 configures it as gpio.
-	 */
-	gpio = GPIO_NR_TREO680_LCD_POWER;
-	if (gpio_request_one(gpio, lcd_flags, "LCD power") < 0)
-		goto fail;
-
-	/*
-	 * These two are called "enables", for lack of a better understanding.
-	 * If either of these are toggled after the lcd is initialized, the
-	 * image becomes degraded.  N.B. The IPL shipped with the treo
-	 * configures GPIO_NR_TREO680_LCD_EN_N as output and drives it high.  If
-	 * the IPL is ever reprogrammed, this initialization may be need to be
-	 * revisited.
-	 */
-	gpio = GPIO_NR_TREO680_LCD_EN;
-	if (gpio_request_one(gpio, lcd_flags, "LCD enable") < 0)
-		goto fail;
-	gpio = GPIO_NR_TREO680_LCD_EN_N;
-	if (gpio_request_one(gpio, lcd_flags, "LCD enable_n") < 0)
-		goto fail;
-
-	/* driving this low turns LCD on */
-	gpio_set_value(GPIO_NR_TREO680_LCD_EN_N, 0);
-
-	return;
- fail:
-	pr_err("gpio %d initialization failed\n", gpio);
-	gpio_free(GPIO_NR_TREO680_LCD_POWER);
-	gpio_free(GPIO_NR_TREO680_LCD_EN);
-	gpio_free(GPIO_NR_TREO680_LCD_EN_N);
-}
-
-static struct gpiod_lookup_table treo680_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_TREO_SD_DETECT_N,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_TREO680_SD_READONLY,
-			    "wp", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_TREO680_SD_POWER,
-			    "power", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static void __init treo680_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
-	palmphone_common_init();
-	treo680_gpio_init();
-	palm27x_mmc_init(&treo680_mci_gpio_table);
-}
-#endif
-
-#ifdef CONFIG_MACH_CENTRO
-
-static struct gpiod_lookup_table centro685_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_TREO_SD_DETECT_N,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_CENTRO_SD_POWER,
-			    "power", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static void __init centro_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config));
-	palmphone_common_init();
-	palm27x_mmc_init(&centro685_mci_gpio_table);
-}
-#endif
-
-#ifdef CONFIG_MACH_TREO680
-MACHINE_START(TREO680, "Palm Treo 680")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.reserve	= treo_reserve,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine   = treo680_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_CENTRO
-MACHINE_START(CENTRO, "Palm Centro 685")
-	.atag_offset    = 0x100,
-	.map_io         = pxa27x_map_io,
-	.reserve	= treo_reserve,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq       = pxa27x_init_irq,
-	.handle_irq       = pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= centro_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-pxa/palmtreo.h b/arch/arm/mach-pxa/palmtreo.h
deleted file mode 100644
index 5715cd505424..000000000000
--- a/arch/arm/mach-pxa/palmtreo.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * GPIOs and interrupts for Palm Treo smartphones
- *
- * currently supported:
- *     Palm Treo 680 (GSM)
- *     Palm Centro 685 (GSM)
- *
- * Author:     Tomas Cech <sleep_walker@suse.cz>
- *
- * find more info at www.hackndev.com
- */
-
-#ifndef _INCLUDE_TREO_H_
-#define _INCLUDE_TREO_H_
-
-/* GPIOs */
-#define GPIO_NR_TREO_POWER_DETECT	0
-#define GPIO_NR_TREO_AMP_EN		27
-#define GPIO_NR_TREO_GREEN_LED	20
-#define GPIO_NR_TREO_RED_LED		79
-#define GPIO_NR_TREO_SD_DETECT_N	113
-#define GPIO_NR_TREO_EP_DETECT_N	116
-#define GPIO_NR_TREO_USB_DETECT	1
-#define GPIO_NR_TREO_USB_PULLUP	114
-#define GPIO_NR_TREO_GSM_POWER	40
-#define GPIO_NR_TREO_GSM_RESET	87
-#define GPIO_NR_TREO_GSM_WAKE	57
-#define GPIO_NR_TREO_GSM_HOST_WAKE	14
-#define GPIO_NR_TREO_GSM_TRIGGER	10
-#define GPIO_NR_TREO_IR_EN		115
-#define GPIO_NR_TREO_IR_TXD		47
-#define GPIO_NR_TREO_BL_POWER	38
-#define GPIO_NR_TREO_LCD_POWER	25
-
-/* Treo680 specific GPIOs */
-#define GPIO_NR_TREO680_SD_READONLY	33
-#define GPIO_NR_TREO680_SD_POWER	42
-#define GPIO_NR_TREO680_VIBRATE_EN	44
-#define GPIO_NR_TREO680_KEYB_BL		24
-#define GPIO_NR_TREO680_BT_EN		43
-#define GPIO_NR_TREO680_LCD_POWER	77
-#define GPIO_NR_TREO680_LCD_EN		86
-#define GPIO_NR_TREO680_LCD_EN_N	25
-
-/* Centro685 specific GPIOs */
-#define GPIO_NR_CENTRO_SD_POWER		21
-#define GPIO_NR_CENTRO_VIBRATE_EN	22
-#define GPIO_NR_CENTRO_KEYB_BL		33
-#define GPIO_NR_CENTRO_BT_EN		80
-
-/* Various addresses  */
-#define TREO_PHYS_RAM_START	0xa0000000
-#define TREO_PHYS_IO_START	0x40000000
-#define TREO_STR_BASE	0xa2000000
-
-/* BACKLIGHT */
-#define TREO_MAX_INTENSITY		254
-#define TREO_DEFAULT_INTENSITY	160
-#define TREO_LIMIT_MASK		0x7F
-#define TREO_PRESCALER		63
-#define TREO_PERIOD_NS		3500
-
-#endif
diff --git a/arch/arm/mach-pxa/palmtx-pcmcia.c b/arch/arm/mach-pxa/palmtx-pcmcia.c
deleted file mode 100644
index 8c2aaad93043..000000000000
--- a/arch/arm/mach-pxa/palmtx-pcmcia.c
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa2xx_palmtx.c
- *
- * Driver for Palm T|X PCMCIA
- *
- * Copyright (C) 2007-2011 Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include "palmtx.h"
-#include <pcmcia/soc_common.h>
-
-static struct gpio palmtx_pcmcia_gpios[] = {
-	{ GPIO_NR_PALMTX_PCMCIA_POWER1,	GPIOF_INIT_LOW,	"PCMCIA Power 1" },
-	{ GPIO_NR_PALMTX_PCMCIA_POWER2,	GPIOF_INIT_LOW,	"PCMCIA Power 2" },
-	{ GPIO_NR_PALMTX_PCMCIA_RESET,	GPIOF_INIT_HIGH,"PCMCIA Reset" },
-};
-
-static int palmtx_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	int ret;
-
-	ret = gpio_request_array(palmtx_pcmcia_gpios,
-				ARRAY_SIZE(palmtx_pcmcia_gpios));
-
-	skt->stat[SOC_STAT_RDY].gpio = GPIO_NR_PALMTX_PCMCIA_READY;
-	skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready";
-
-	return ret;
-}
-
-static void palmtx_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
-	gpio_free_array(palmtx_pcmcia_gpios, ARRAY_SIZE(palmtx_pcmcia_gpios));
-}
-
-static void palmtx_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-					struct pcmcia_state *state)
-{
-	state->detect = 1; /* always inserted */
-	state->vs_3v  = 1;
-	state->vs_Xv  = 0;
-}
-
-static int
-palmtx_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-				const socket_state_t *state)
-{
-	gpio_set_value(GPIO_NR_PALMTX_PCMCIA_POWER1, 1);
-	gpio_set_value(GPIO_NR_PALMTX_PCMCIA_POWER2, 1);
-	gpio_set_value(GPIO_NR_PALMTX_PCMCIA_RESET,
-			!!(state->flags & SS_RESET));
-
-	return 0;
-}
-
-static struct pcmcia_low_level palmtx_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-
-	.first			= 0,
-	.nr			= 1,
-
-	.hw_init		= palmtx_pcmcia_hw_init,
-	.hw_shutdown		= palmtx_pcmcia_hw_shutdown,
-
-	.socket_state		= palmtx_pcmcia_socket_state,
-	.configure_socket	= palmtx_pcmcia_configure_socket,
-};
-
-static struct platform_device *palmtx_pcmcia_device;
-
-static int __init palmtx_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_palmtx())
-		return -ENODEV;
-
-	palmtx_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!palmtx_pcmcia_device)
-		return -ENOMEM;
-
-	ret = platform_device_add_data(palmtx_pcmcia_device, &palmtx_pcmcia_ops,
-					sizeof(palmtx_pcmcia_ops));
-
-	if (!ret)
-		ret = platform_device_add(palmtx_pcmcia_device);
-
-	if (ret)
-		platform_device_put(palmtx_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit palmtx_pcmcia_exit(void)
-{
-	platform_device_unregister(palmtx_pcmcia_device);
-}
-
-module_init(palmtx_pcmcia_init);
-module_exit(palmtx_pcmcia_exit);
-
-MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
-MODULE_DESCRIPTION("PCMCIA support for Palm T|X");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
deleted file mode 100644
index c0d0762540ab..000000000000
--- a/arch/arm/mach-pxa/palmtx.c
+++ /dev/null
@@ -1,390 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hardware definitions for PalmTX
- *
- * Author:     Marek Vasut <marek.vasut@gmail.com>
- *
- * Based on work of:
- *		Alex Osborne <ato@meshy.org>
- *		Cristiano P. <cristianop@users.sourceforge.net>
- *		Jan Herman <2hp@seznam.cz>
- *		Michal Hrusecky
- *
- * (find more info at www.hackndev.com)
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx.h>
-#include <linux/power_supply.h>
-#include <linux/mtd/platnand.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "pxa27x.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include "palmtx.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include "udc.h"
-#include <linux/platform_data/asoc-palm27x.h>
-#include "palm27x.h"
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long palmtx_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO14_GPIO,	/* SD detect */
-	GPIO114_GPIO,	/* SD power */
-	GPIO115_GPIO,	/* SD r/o switch */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO89_AC97_SYSCLK,
-	GPIO95_AC97_nRESET,
-
-	/* IrDA */
-	GPIO40_GPIO,	/* ir disable */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* USB */
-	GPIO13_GPIO,	/* usb detect */
-	GPIO93_GPIO,	/* usb power */
-
-	/* PCMCIA */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO79_PSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO94_GPIO,	/* wifi power 1 */
-	GPIO108_GPIO,	/* wifi power 2 */
-	GPIO116_GPIO,	/* wifi ready */
-
-	/* MATRIX KEYPAD */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* FFUART */
-	GPIO34_FFUART_RXD,
-	GPIO39_FFUART_TXD,
-
-	/* NAND */
-	GPIO15_nCS_1,
-	GPIO18_RDY,
-
-	/* MISC. */
-	GPIO10_GPIO,	/* hotsync button */
-	GPIO12_GPIO,	/* power detect */
-	GPIO107_GPIO,	/* earphone detect */
-};
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition palmtx_partitions[] = {
-	{
-		.name		= "Flash",
-		.offset		= 0x00000000,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data palmtx_flash_data[] = {
-	{
-		.width		= 2,			/* bankwidth in bytes */
-		.parts		= palmtx_partitions,
-		.nr_parts	= ARRAY_SIZE(palmtx_partitions)
-	}
-};
-
-static struct resource palmtx_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_8M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device palmtx_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= &palmtx_flash_resource,
-	.num_resources	= 1,
-	.dev 		= {
-		.platform_data = palmtx_flash_data,
-	},
-};
-
-static void __init palmtx_nor_init(void)
-{
-	platform_device_register(&palmtx_flash);
-}
-#else
-static inline void palmtx_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static const unsigned int palmtx_matrix_keys[] = {
-	KEY(0, 0, KEY_POWER),
-	KEY(0, 1, KEY_F1),
-	KEY(0, 2, KEY_ENTER),
-
-	KEY(1, 0, KEY_F2),
-	KEY(1, 1, KEY_F3),
-	KEY(1, 2, KEY_F4),
-
-	KEY(2, 0, KEY_UP),
-	KEY(2, 2, KEY_DOWN),
-
-	KEY(3, 0, KEY_RIGHT),
-	KEY(3, 2, KEY_LEFT),
-};
-
-static struct matrix_keymap_data palmtx_matrix_keymap_data = {
-	.keymap			= palmtx_matrix_keys,
-	.keymap_size		= ARRAY_SIZE(palmtx_matrix_keys),
-};
-
-static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
-	.matrix_key_rows	= 4,
-	.matrix_key_cols	= 3,
-	.matrix_keymap_data	= &palmtx_matrix_keymap_data,
-
-	.debounce_interval	= 30,
-};
-
-static void __init palmtx_kpc_init(void)
-{
-	pxa_set_keypad_info(&palmtx_keypad_platform_data);
-}
-#else
-static inline void palmtx_kpc_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button palmtx_pxa_buttons[] = {
-	{KEY_F8, GPIO_NR_PALMTX_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
-};
-
-static struct gpio_keys_platform_data palmtx_pxa_keys_data = {
-	.buttons	= palmtx_pxa_buttons,
-	.nbuttons	= ARRAY_SIZE(palmtx_pxa_buttons),
-};
-
-static struct platform_device palmtx_pxa_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &palmtx_pxa_keys_data,
-	},
-};
-
-static void __init palmtx_keys_init(void)
-{
-	platform_device_register(&palmtx_pxa_keys);
-}
-#else
-static inline void palmtx_keys_init(void) {}
-#endif
-
-/******************************************************************************
- * NAND Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_NAND_PLATFORM) || \
-	defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
-static void palmtx_nand_cmd_ctl(struct nand_chip *this, int cmd,
-				unsigned int ctrl)
-{
-	char __iomem *nandaddr = this->legacy.IO_ADDR_W;
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	if (ctrl & NAND_CLE)
-		writeb(cmd, PALMTX_NAND_CLE_VIRT);
-	else if (ctrl & NAND_ALE)
-		writeb(cmd, PALMTX_NAND_ALE_VIRT);
-	else
-		writeb(cmd, nandaddr);
-}
-
-static struct mtd_partition palmtx_partition_info[] = {
-	[0] = {
-		.name	= "palmtx-0",
-		.offset	= 0,
-		.size	= MTDPART_SIZ_FULL
-	},
-};
-
-struct platform_nand_data palmtx_nand_platdata = {
-	.chip	= {
-		.nr_chips		= 1,
-		.chip_offset		= 0,
-		.nr_partitions		= ARRAY_SIZE(palmtx_partition_info),
-		.partitions		= palmtx_partition_info,
-		.chip_delay		= 20,
-	},
-	.ctrl	= {
-		.cmd_ctrl	= palmtx_nand_cmd_ctl,
-	},
-};
-
-static struct resource palmtx_nand_resource[] = {
-	[0]	= {
-		.start	= PXA_CS1_PHYS,
-		.end	= PXA_CS1_PHYS + SZ_1M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device palmtx_nand = {
-	.name		= "gen_nand",
-	.num_resources	= ARRAY_SIZE(palmtx_nand_resource),
-	.resource	= palmtx_nand_resource,
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &palmtx_nand_platdata,
-	}
-};
-
-static void __init palmtx_nand_init(void)
-{
-	platform_device_register(&palmtx_nand);
-}
-#else
-static inline void palmtx_nand_init(void) {}
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static struct map_desc palmtx_io_desc[] __initdata = {
-{
-	.virtual	= (unsigned long)PALMTX_PCMCIA_VIRT,
-	.pfn		= __phys_to_pfn(PALMTX_PCMCIA_PHYS),
-	.length		= PALMTX_PCMCIA_SIZE,
-	.type		= MT_DEVICE,
-}, {
-	.virtual	= (unsigned long)PALMTX_NAND_ALE_VIRT,
-	.pfn		= __phys_to_pfn(PALMTX_NAND_ALE_PHYS),
-	.length		= SZ_1M,
-	.type		= MT_DEVICE,
-}, {
-	.virtual	= (unsigned long)PALMTX_NAND_CLE_VIRT,
-	.pfn		= __phys_to_pfn(PALMTX_NAND_CLE_PHYS),
-	.length		= SZ_1M,
-	.type		= MT_DEVICE,
-}
-};
-
-static void __init palmtx_map_io(void)
-{
-	pxa27x_map_io();
-	iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
-}
-
-static struct gpiod_lookup_table palmtx_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTX_SD_DETECT_N,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTX_SD_READONLY,
-			    "wp", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTX_SD_POWER,
-			    "power", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table palmtx_wm97xx_touch_gpio_table = {
-	.dev_id = "wm97xx-touch",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", 27, "touch", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static void __init palmtx_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	palm27x_mmc_init(&palmtx_mci_gpio_table);
-	gpiod_add_lookup_table(&palmtx_wm97xx_touch_gpio_table);
-	palm27x_pm_init(PALMTX_STR_BASE);
-	palm27x_lcd_init(-1, &palm_320x480_lcd_mode);
-	palm27x_udc_init(GPIO_NR_PALMTX_USB_DETECT_N,
-			GPIO_NR_PALMTX_USB_PULLUP, 1);
-	palm27x_irda_init(GPIO_NR_PALMTX_IR_DISABLE);
-	palm27x_ac97_init(PALMTX_BAT_MIN_VOLTAGE, PALMTX_BAT_MAX_VOLTAGE,
-			GPIO_NR_PALMTX_EARPHONE_DETECT, 95);
-	palm27x_pwm_init(GPIO_NR_PALMTX_BL_POWER, GPIO_NR_PALMTX_LCD_POWER);
-	palm27x_power_init(GPIO_NR_PALMTX_POWER_DETECT, -1);
-	palm27x_pmic_init();
-	palmtx_kpc_init();
-	palmtx_keys_init();
-	palmtx_nor_init();
-	palmtx_nand_init();
-}
-
-MACHINE_START(PALMTX, "Palm T|X")
-	.atag_offset	= 0x100,
-	.map_io		= palmtx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= palmtx_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/palmtx.h b/arch/arm/mach-pxa/palmtx.h
deleted file mode 100644
index ec88abf0fc6c..000000000000
--- a/arch/arm/mach-pxa/palmtx.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * GPIOs and interrupts for Palm T|X Handheld Computer
- *
- * Based on palmld-gpio.h by Alex Osborne
- *
- * Authors:	Marek Vasut <marek.vasut@gmail.com>
- *		Cristiano P. <cristianop@users.sourceforge.net>
- *		Jan Herman <2hp@seznam.cz>
- */
-
-#ifndef _INCLUDE_PALMTX_H_
-#define _INCLUDE_PALMTX_H_
-
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
-
-/** HERE ARE GPIOs **/
-
-/* GPIOs */
-#define GPIO_NR_PALMTX_GPIO_RESET		1
-
-#define GPIO_NR_PALMTX_POWER_DETECT		12 /* 90 */
-#define GPIO_NR_PALMTX_HOTSYNC_BUTTON_N		10
-#define GPIO_NR_PALMTX_EARPHONE_DETECT		107
-
-/* SD/MMC */
-#define GPIO_NR_PALMTX_SD_DETECT_N		14
-#define GPIO_NR_PALMTX_SD_POWER			114 /* probably */
-#define GPIO_NR_PALMTX_SD_READONLY		115 /* probably */
-
-/* TOUCHSCREEN */
-#define GPIO_NR_PALMTX_WM9712_IRQ		27
-
-/* IRDA -  disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
-#define GPIO_NR_PALMTX_IR_DISABLE		40
-
-/* USB */
-#define GPIO_NR_PALMTX_USB_DETECT_N		13
-#define GPIO_NR_PALMTX_USB_PULLUP		93
-
-/* LCD/BACKLIGHT */
-#define GPIO_NR_PALMTX_BL_POWER			84
-#define GPIO_NR_PALMTX_LCD_POWER		96
-
-/* LCD BORDER */
-#define GPIO_NR_PALMTX_BORDER_SWITCH		98
-#define GPIO_NR_PALMTX_BORDER_SELECT		22
-
-/* BLUETOOTH */
-#define GPIO_NR_PALMTX_BT_POWER			17
-#define GPIO_NR_PALMTX_BT_RESET			83
-
-/* PCMCIA (WiFi) */
-#define GPIO_NR_PALMTX_PCMCIA_POWER1		94
-#define GPIO_NR_PALMTX_PCMCIA_POWER2		108
-#define GPIO_NR_PALMTX_PCMCIA_RESET		79
-#define GPIO_NR_PALMTX_PCMCIA_READY		116
-
-/* NAND Flash ... this GPIO may be incorrect! */
-#define GPIO_NR_PALMTX_NAND_BUFFER_DIR		79
-
-/* INTERRUPTS */
-#define IRQ_GPIO_PALMTX_SD_DETECT_N	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_SD_DETECT_N)
-#define IRQ_GPIO_PALMTX_WM9712_IRQ	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_WM9712_IRQ)
-#define IRQ_GPIO_PALMTX_USB_DETECT	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_USB_DETECT)
-#define IRQ_GPIO_PALMTX_GPIO_RESET	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_GPIO_RESET)
-
-/** HERE ARE INIT VALUES **/
-
-/* Various addresses  */
-#define PALMTX_PCMCIA_PHYS	0x28000000
-#define PALMTX_PCMCIA_VIRT	IOMEM(0xf0000000)
-#define PALMTX_PCMCIA_SIZE	0x100000
-
-#define PALMTX_PHYS_RAM_START	0xa0000000
-#define PALMTX_PHYS_IO_START	0x40000000
-
-#define PALMTX_STR_BASE		0xa0200000
-
-#define PALMTX_PHYS_FLASH_START	PXA_CS0_PHYS	/* ChipSelect 0 */
-#define PALMTX_PHYS_NAND_START	PXA_CS1_PHYS	/* ChipSelect 1 */
-
-#define PALMTX_NAND_ALE_PHYS	(PALMTX_PHYS_NAND_START | (1 << 24))
-#define PALMTX_NAND_CLE_PHYS	(PALMTX_PHYS_NAND_START | (1 << 25))
-#define PALMTX_NAND_ALE_VIRT	IOMEM(0xff100000)
-#define PALMTX_NAND_CLE_VIRT	IOMEM(0xff200000)
-
-/* TOUCHSCREEN */
-#define AC97_LINK_FRAME			21
-
-
-/* BATTERY */
-#define PALMTX_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
-#define PALMTX_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
-#define PALMTX_BAT_MAX_CURRENT		0	/* unknown */
-#define PALMTX_BAT_MIN_CURRENT		0	/* unknown */
-#define PALMTX_BAT_MAX_CHARGE		1	/* unknown */
-#define PALMTX_BAT_MIN_CHARGE		1	/* unknown */
-#define PALMTX_MAX_LIFE_MINS		360	/* on-life in minutes */
-
-#define PALMTX_BAT_MEASURE_DELAY	(HZ * 1)
-
-/* BACKLIGHT */
-#define PALMTX_MAX_INTENSITY		0xFE
-#define PALMTX_DEFAULT_INTENSITY	0x7E
-#define PALMTX_LIMIT_MASK		0x7F
-#define PALMTX_PRESCALER		0x3F
-#define PALMTX_PERIOD_NS		3500
-
-#endif
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
deleted file mode 100644
index 66e8fe6f1661..000000000000
--- a/arch/arm/mach-pxa/palmz72.c
+++ /dev/null
@@ -1,319 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hardware definitions for Palm Zire72
- *
- * Authors:
- *	Vladimir "Farcaller" Pouzanov <farcaller@gmail.com>
- *	Sergey Lapin <slapin@ossfans.org>
- *	Alex Osborne <bobofdoom@gmail.com>
- *	Jan Herman <2hp@seznam.cz>
- *
- * Rewrite for mainline:
- *	Marek Vasut <marek.vasut@gmail.com>
- *
- * (find more info at www.hackndev.com)
- */
-
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx.h>
-#include <linux/power_supply.h>
-#include <linux/platform_data/i2c-gpio.h>
-#include <linux/gpio/machine.h>
-
-#include <asm/mach-types.h>
-#include <asm/suspend.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "pxa27x.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include "palmz72.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include "udc.h"
-#include <linux/platform_data/asoc-palm27x.h>
-#include "palm27x.h"
-
-#include "pm.h"
-#include <linux/platform_data/media/camera-pxa.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long palmz72_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO14_GPIO,	/* SD detect */
-	GPIO115_GPIO,	/* SD RO */
-	GPIO98_GPIO,	/* SD power */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO89_AC97_SYSCLK,
-	GPIO113_AC97_nRESET,
-
-	/* IrDA */
-	GPIO49_GPIO,	/* ir disable */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* USB */
-	GPIO15_GPIO,	/* usb detect */
-	GPIO95_GPIO,	/* usb pullup */
-
-	/* Matrix keypad */
-	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO97_KP_MKIN_3	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	GPIO20_GPIO,	/* bl power */
-	GPIO21_GPIO,	/* LCD border switch */
-	GPIO22_GPIO,	/* LCD border color */
-	GPIO96_GPIO,	/* lcd power */
-
-	/* PXA Camera */
-	GPIO81_CIF_DD_0,
-	GPIO48_CIF_DD_5,
-	GPIO50_CIF_DD_3,
-	GPIO51_CIF_DD_2,
-	GPIO52_CIF_DD_4,
-	GPIO53_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO55_CIF_DD_1,
-	GPIO84_CIF_FV,
-	GPIO85_CIF_LV,
-	GPIO93_CIF_DD_6,
-	GPIO108_CIF_DD_7,
-
-	GPIO56_GPIO,	/* OV9640 Powerdown */
-	GPIO57_GPIO,	/* OV9640 Reset */
-	GPIO91_GPIO,	/* OV9640 Power */
-
-	/* I2C */
-	GPIO117_GPIO,	/* I2C_SCL */
-	GPIO118_GPIO,	/* I2C_SDA */
-
-	/* Misc. */
-	GPIO0_GPIO	| WAKEUP_ON_LEVEL_HIGH,	/* power detect */
-	GPIO88_GPIO,				/* green led */
-	GPIO27_GPIO,				/* WM9712 IRQ */
-};
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static const unsigned int palmz72_matrix_keys[] = {
-	KEY(0, 0, KEY_POWER),
-	KEY(0, 1, KEY_F1),
-	KEY(0, 2, KEY_ENTER),
-
-	KEY(1, 0, KEY_F2),
-	KEY(1, 1, KEY_F3),
-	KEY(1, 2, KEY_F4),
-
-	KEY(2, 0, KEY_UP),
-	KEY(2, 2, KEY_DOWN),
-
-	KEY(3, 0, KEY_RIGHT),
-	KEY(3, 2, KEY_LEFT),
-};
-
-static struct matrix_keymap_data almz72_matrix_keymap_data = {
-	.keymap			= palmz72_matrix_keys,
-	.keymap_size		= ARRAY_SIZE(palmz72_matrix_keys),
-};
-
-static struct pxa27x_keypad_platform_data palmz72_keypad_platform_data = {
-	.matrix_key_rows	= 4,
-	.matrix_key_cols	= 3,
-	.matrix_keymap_data	= &almz72_matrix_keymap_data,
-
-	.debounce_interval	= 30,
-};
-
-static void __init palmz72_kpc_init(void)
-{
-	pxa_set_keypad_info(&palmz72_keypad_platform_data);
-}
-#else
-static inline void palmz72_kpc_init(void) {}
-#endif
-
-/******************************************************************************
- * LEDs
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static struct gpio_led gpio_leds[] = {
-	{
-		.name			= "palmz72:green:led",
-		.default_trigger	= "none",
-		.gpio			= GPIO_NR_PALMZ72_LED_GREEN,
-	},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device palmz72_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_led_info,
-	}
-};
-
-static void __init palmz72_leds_init(void)
-{
-	platform_device_register(&palmz72_leds);
-}
-#else
-static inline void palmz72_leds_init(void) {}
-#endif
-
-#ifdef CONFIG_PM
-
-/* We have some black magic here
- * PalmOS ROM on recover expects special struct physical address
- * to be transferred via PSPR. Using this struct PalmOS restores
- * its state after sleep. As for Linux, we need to setup it the
- * same way. More than that, PalmOS ROM changes some values in memory.
- * For now only one location is found, which needs special treatment.
- * Thanks to Alex Osborne, Andrzej Zaborowski, and lots of other people
- * for reading backtraces for me :)
- */
-
-#define PALMZ72_SAVE_DWORD ((unsigned long *)0xc0000050)
-
-static struct palmz72_resume_info palmz72_resume_info = {
-	.magic0 = 0xb4e6,
-	.magic1 = 1,
-
-	/* reset state, MMU off etc */
-	.arm_control = 0,
-	.aux_control = 0,
-	.ttb = 0,
-	.domain_access = 0,
-	.process_id = 0,
-};
-
-static unsigned long store_ptr;
-
-/* syscore_ops for Palm Zire 72 PM */
-
-static int palmz72_pm_suspend(void)
-{
-	/* setup the resume_info struct for the original bootloader */
-	palmz72_resume_info.resume_addr = (u32) cpu_resume;
-
-	/* Storing memory touched by ROM */
-	store_ptr = *PALMZ72_SAVE_DWORD;
-
-	/* Setting PSPR to a proper value */
-	PSPR = __pa_symbol(&palmz72_resume_info);
-
-	return 0;
-}
-
-static void palmz72_pm_resume(void)
-{
-	*PALMZ72_SAVE_DWORD = store_ptr;
-}
-
-static struct syscore_ops palmz72_pm_syscore_ops = {
-	.suspend = palmz72_pm_suspend,
-	.resume = palmz72_pm_resume,
-};
-
-static int __init palmz72_pm_init(void)
-{
-	if (machine_is_palmz72()) {
-		register_syscore_ops(&palmz72_pm_syscore_ops);
-		return 0;
-	}
-	return -ENODEV;
-}
-
-device_initcall(palmz72_pm_init);
-#endif
-
-static struct gpiod_lookup_table palmz72_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMZ72_SD_DETECT_N,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMZ72_SD_RO,
-			    "wp", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMZ72_SD_POWER_N,
-			    "power", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init palmz72_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmz72_pin_config));
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	palm27x_mmc_init(&palmz72_mci_gpio_table);
-	palm27x_lcd_init(-1, &palm_320x320_lcd_mode);
-	palm27x_udc_init(GPIO_NR_PALMZ72_USB_DETECT_N,
-			GPIO_NR_PALMZ72_USB_PULLUP, 0);
-	palm27x_irda_init(GPIO_NR_PALMZ72_IR_DISABLE);
-	palm27x_ac97_init(PALMZ72_BAT_MIN_VOLTAGE, PALMZ72_BAT_MAX_VOLTAGE,
-			-1, 113);
-	palm27x_pwm_init(-1, -1);
-	palm27x_power_init(-1, -1);
-	palm27x_pmic_init();
-	palmz72_kpc_init();
-	palmz72_leds_init();
-}
-
-MACHINE_START(PALMZ72, "Palm Zire72")
-	.atag_offset	= 0x100,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= palmz72_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/palmz72.h b/arch/arm/mach-pxa/palmz72.h
deleted file mode 100644
index 40f3f9987983..000000000000
--- a/arch/arm/mach-pxa/palmz72.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * GPIOs and interrupts for Palm Zire72 Handheld Computer
- *
- * Authors:	Alex Osborne <bobofdoom@gmail.com>
- *		Jan Herman <2hp@seznam.cz>
- *		Sergey Lapin <slapin@ossfans.org>
- */
-
-#ifndef _INCLUDE_PALMZ72_H_
-#define _INCLUDE_PALMZ72_H_
-
-/* Power and control */
-#define GPIO_NR_PALMZ72_GPIO_RESET		1
-#define GPIO_NR_PALMZ72_POWER_DETECT		0
-
-/* SD/MMC */
-#define GPIO_NR_PALMZ72_SD_DETECT_N		14
-#define GPIO_NR_PALMZ72_SD_POWER_N		98
-#define GPIO_NR_PALMZ72_SD_RO			115
-
-/* Touchscreen */
-#define GPIO_NR_PALMZ72_WM9712_IRQ		27
-
-/* IRDA -  disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
-#define GPIO_NR_PALMZ72_IR_DISABLE		49
-
-/* USB */
-#define GPIO_NR_PALMZ72_USB_DETECT_N		15
-#define GPIO_NR_PALMZ72_USB_PULLUP		95
-
-/* LCD/Backlight */
-#define GPIO_NR_PALMZ72_BL_POWER		20
-#define GPIO_NR_PALMZ72_LCD_POWER		96
-
-/* LED */
-#define GPIO_NR_PALMZ72_LED_GREEN		88
-
-/* Bluetooth */
-#define GPIO_NR_PALMZ72_BT_POWER		17
-#define GPIO_NR_PALMZ72_BT_RESET		83
-
-/* Camera */
-#define GPIO_NR_PALMZ72_CAM_PWDN		56
-#define GPIO_NR_PALMZ72_CAM_RESET		57
-#define GPIO_NR_PALMZ72_CAM_POWER		91
-
-/** Initial values **/
-
-/* Battery */
-#define PALMZ72_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
-#define PALMZ72_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
-#define PALMZ72_BAT_MAX_CURRENT		0	/* unknown */
-#define PALMZ72_BAT_MIN_CURRENT		0	/* unknown */
-#define PALMZ72_BAT_MAX_CHARGE		1	/* unknown */
-#define PALMZ72_BAT_MIN_CHARGE		1	/* unknown */
-#define PALMZ72_MAX_LIFE_MINS		360	/* on-life in minutes */
-
-/* Backlight */
-#define PALMZ72_MAX_INTENSITY		0xFE
-#define PALMZ72_DEFAULT_INTENSITY	0x7E
-#define PALMZ72_LIMIT_MASK		0x7F
-#define PALMZ72_PRESCALER		0x3F
-#define PALMZ72_PERIOD_NS		3500
-
-#ifdef CONFIG_PM
-struct palmz72_resume_info {
-	u32 magic0;		/* 0x0 */
-	u32 magic1;		/* 0x4 */
-	u32 resume_addr;	/* 0x8 */
-	u32 pad[11];		/* 0xc..0x37 */
-	u32 arm_control;	/* 0x38 */
-	u32 aux_control;	/* 0x3c */
-	u32 ttb;		/* 0x40 */
-	u32 domain_access;	/* 0x44 */
-	u32 process_id;		/* 0x48 */
-};
-#endif
-#endif
-
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
deleted file mode 100644
index 7ff6f0d655c8..000000000000
--- a/arch/arm/mach-pxa/pcm027.c
+++ /dev/null
@@ -1,266 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/pcm027.c
- *  Support for the Phytec phyCORE-PXA270 CPU card (aka PCM-027).
- *
- *  Refer
- *   http://www.phytec.com/products/sbc/ARM-XScale/phyCORE-XScale-PXA270.html
- *  for additional hardware info
- *
- *  Author:	Juergen Kilb
- *  Created:	April 05, 2005
- *  Copyright:	Phytec Messtechnik GmbH
- *  e-Mail:	armlinux@phytec.de
- *
- *  based on Intel Mainstone Board
- *
- *  Copyright 2007 Juergen Beisert @ Pengutronix (j.beisert@pengutronix.de)
- */
-
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/max7301.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/leds.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "pxa27x.h"
-#include "pcm027.h"
-#include "generic.h"
-
-/*
- * ABSTRACT:
- *
- * The PXA270 processor comes with a bunch of hardware on its silicon.
- * Not all of this hardware can be used at the same time and not all
- * is routed to module's connectors. Also it depends on the baseboard, what
- * kind of hardware can be used in which way.
- * -> So this file supports the main devices on the CPU card only!
- * Refer pcm990-baseboard.c how to extend this features to get a full
- * blown system with many common interfaces.
- *
- * The PCM-027 supports the following interfaces through its connectors and
- * will be used in pcm990-baseboard.c:
- *
- * - LCD support
- * - MMC support
- * - IDE/CF card
- * - FFUART
- * - BTUART
- * - IRUART
- * - AC97
- * - SSP
- * - SSP3
- *
- * Claimed GPIOs:
- * GPIO0 -> IRQ input from RTC
- * GPIO2 -> SYS_ENA*)
- * GPIO3 -> PWR_SCL
- * GPIO4 -> PWR_SDA
- * GPIO5 -> PowerCap0*)
- * GPIO6 -> PowerCap1*)
- * GPIO7 -> PowerCap2*)
- * GPIO8 -> PowerCap3*)
- * GPIO15 -> /CS1
- * GPIO20 -> /CS2
- * GPIO21 -> /CS3
- * GPIO33 -> /CS5 network controller select
- * GPIO52 -> IRQ from network controller
- * GPIO78 -> /CS2
- * GPIO80 -> /CS4
- * GPIO90 -> LED0
- * GPIO91 -> LED1
- * GPIO114 -> IRQ from CAN controller
- * GPIO117 -> SCL
- * GPIO118 -> SDA
- *
- * *) CPU internal use only
- */
-
-static unsigned long pcm027_pin_config[] __initdata = {
-	/* Chip Selects */
-	GPIO20_nSDCS_2,
-	GPIO21_nSDCS_3,
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,
-	GPIO80_nCS_4,
-	GPIO33_nCS_5,	/* Ethernet */
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* GPIO */
-	GPIO52_GPIO,	/* IRQ from network controller */
-#ifdef CONFIG_LEDS_GPIO
-	GPIO90_GPIO,	/* PCM027_LED_CPU */
-	GPIO91_GPIO,	/* PCM027_LED_HEART_BEAT */
-#endif
-	GPIO114_GPIO,	/* IRQ from CAN controller */
-};
-
-/*
- * SMC91x network controller specific stuff
- */
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= PCM027_ETH_PHYS + 0x300,
-		.end	= PCM027_ETH_PHYS + PCM027_ETH_SIZE,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PCM027_ETH_IRQ,
-		.end	= PCM027_ETH_IRQ,
-		/* note: smc91x's driver doesn't use the trigger bits yet */
-		.flags	= IORESOURCE_IRQ | PCM027_ETH_IRQ_EDGE,
-	}
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-/*
- * SPI host and devices
- */
-static struct pxa2xx_spi_controller pxa_ssp_master_info = {
-	.num_chipselect	= 1,
-};
-
-static struct max7301_platform_data max7301_info = {
-	.base = -1,
-};
-
-/* bus_num must match id in pxa2xx_set_spi_info() call */
-static struct spi_board_info spi_board_info[] __initdata = {
-	{
-		.modalias	= "max7301",
-		.platform_data	= &max7301_info,
-		.max_speed_hz	= 13000000,
-		.bus_num	= 1,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_0,
-	},
-};
-
-/*
- * NOR flash
- */
-static struct physmap_flash_data pcm027_flash_data = {
-	.width  = 4,
-};
-
-static struct resource pcm027_flash_resource = {
-	.start          = PCM027_FLASH_PHYS,
-	.end            = PCM027_FLASH_PHYS + PCM027_FLASH_SIZE - 1 ,
-	.flags          = IORESOURCE_MEM,
-};
-
-static struct platform_device pcm027_flash = {
-	.name           = "physmap-flash",
-	.id             = 0,
-	.dev            = {
-		.platform_data  = &pcm027_flash_data,
-	},
-	.resource       = &pcm027_flash_resource,
-	.num_resources  = 1,
-};
-
-#ifdef CONFIG_LEDS_GPIO
-
-static struct gpio_led pcm027_led[] = {
-	{
-		.name = "led0:red",	/* FIXME */
-		.gpio = PCM027_LED_CPU
-	},
-	{
-		.name = "led1:green",	/* FIXME */
-		.gpio = PCM027_LED_HEARD_BEAT
-	},
-};
-
-static struct gpio_led_platform_data pcm027_led_data = {
-	.num_leds	= ARRAY_SIZE(pcm027_led),
-	.leds		= pcm027_led
-};
-
-static struct platform_device pcm027_led_dev = {
-	.name		= "leds-gpio",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &pcm027_led_data,
-	},
-};
-
-#endif /* CONFIG_LEDS_GPIO */
-
-/*
- * declare the available device resources on this board
- */
-static struct platform_device *devices[] __initdata = {
-	&smc91x_device,
-	&pcm027_flash,
-#ifdef CONFIG_LEDS_GPIO
-	&pcm027_led_dev
-#endif
-};
-
-/*
- * pcm027_init - breath some life into the board
- */
-static void __init pcm027_init(void)
-{
-	/* system bus arbiter setting
-	 * - Core_Park
-	 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
-	 */
-	ARB_CNTRL = ARB_CORE_PARK | 0x234;
-
-	pxa2xx_mfp_config(pcm027_pin_config, ARRAY_SIZE(pcm027_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	/* at last call the baseboard to initialize itself */
-#ifdef CONFIG_MACH_PCM990_BASEBOARD
-	pcm990_baseboard_init();
-#endif
-
-	pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-}
-
-static void __init pcm027_map_io(void)
-{
-	pxa27x_map_io();
-
-	/* initialize sleep mode regs (wake-up sources, etc) */
-	PGSR0 = 0x01308000;
-	PGSR1 = 0x00CF0002;
-	PGSR2 = 0x0E294000;
-	PGSR3 = 0x0000C000;
-	PWER  = 0x40000000 | PWER_GPIO0 | PWER_GPIO1;
-	PRER  = 0x00000000;
-	PFER  = 0x00000003;
-}
-
-MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270")
-	/* Maintainer: Pengutronix */
-	.atag_offset	= 0x100,
-	.map_io		= pcm027_map_io,
-	.nr_irqs	= PCM027_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= pcm027_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/pcm027.h b/arch/arm/mach-pxa/pcm027.h
deleted file mode 100644
index 58ade4ad6ba3..000000000000
--- a/arch/arm/mach-pxa/pcm027.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/mach-pxa/include/mach/pcm027.h
- *
- * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
- * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
- */
-
-/*
- * Definitions of CPU card resources only
- */
-
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
-
-/* phyCORE-PXA270 (PCM027) Interrupts */
-#define PCM027_IRQ(x)          (IRQ_BOARD_START + (x))
-#define PCM027_BTDET_IRQ       PCM027_IRQ(0)
-#define PCM027_FF_RI_IRQ       PCM027_IRQ(1)
-#define PCM027_MMCDET_IRQ      PCM027_IRQ(2)
-#define PCM027_PM_5V_IRQ       PCM027_IRQ(3)
-
-#define PCM027_NR_IRQS		(IRQ_BOARD_START + 32)
-
-/* I2C RTC */
-#define PCM027_RTC_IRQ_GPIO	0
-#define PCM027_RTC_IRQ		PXA_GPIO_TO_IRQ(PCM027_RTC_IRQ_GPIO)
-#define PCM027_RTC_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
-#define ADR_PCM027_RTC		0x51	/* I2C address */
-
-/* I2C EEPROM */
-#define ADR_PCM027_EEPROM	0x54	/* I2C address */
-
-/* Ethernet chip (SMSC91C111) */
-#define PCM027_ETH_IRQ_GPIO	52
-#define PCM027_ETH_IRQ		PXA_GPIO_TO_IRQ(PCM027_ETH_IRQ_GPIO)
-#define PCM027_ETH_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-#define PCM027_ETH_PHYS		PXA_CS5_PHYS
-#define PCM027_ETH_SIZE		(1*1024*1024)
-
-/* CAN controller SJA1000 (unsupported yet) */
-#define PCM027_CAN_IRQ_GPIO	114
-#define PCM027_CAN_IRQ		PXA_GPIO_TO_IRQ(PCM027_CAN_IRQ_GPIO)
-#define PCM027_CAN_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
-#define PCM027_CAN_PHYS		0x22000000
-#define PCM027_CAN_SIZE		0x100
-
-/* SPI GPIO expander (unsupported yet) */
-#define PCM027_EGPIO_IRQ_GPIO	27
-#define PCM027_EGPIO_IRQ	PXA_GPIO_TO_IRQ(PCM027_EGPIO_IRQ_GPIO)
-#define PCM027_EGPIO_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
-#define PCM027_EGPIO_CS		24
-/*
- * TODO: Switch this pin from dedicated usage to GPIO if
- * more than the MAX7301 device is connected to this SPI bus
- */
-#define PCM027_EGPIO_CS_MODE	GPIO24_SFRM_MD
-
-/* Flash memory */
-#define PCM027_FLASH_PHYS	0x00000000
-#define PCM027_FLASH_SIZE	0x02000000
-
-/* onboard LEDs connected to GPIO */
-#define PCM027_LED_CPU		90
-#define PCM027_LED_HEARD_BEAT	91
-
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls baseboard's init function.
- * TODO: Add your own basebaord init function and call it from
- * inside pcm027_init(). This example here is for the developmen board.
- * Refer pcm990-baseboard.c
- */
-extern void pcm990_baseboard_init(void);
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
deleted file mode 100644
index 33a9d2eeca1c..000000000000
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ /dev/null
@@ -1,408 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  arch/arm/mach-pxa/pcm990-baseboard.c
- *  Support for the Phytec phyCORE-PXA270 Development Platform (PCM-990).
- *
- *  Refer
- *   http://www.phytec.com/products/rdk/ARM-XScale/phyCORE-XScale-PXA270.html
- *  for additional hardware info
- *
- *  Author:	Juergen Kilb
- *  Created:	April 05, 2005
- *  Copyright:	Phytec Messtechnik GmbH
- *  e-Mail:	armlinux@phytec.de
- *
- *  based on Intel Mainstone Board
- *
- *  Copyright 2007 Juergen Beisert @ Pengutronix (j.beisert@pengutronix.de)
- */
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-
-#include <asm/mach/map.h>
-#include "pxa27x.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include "pcm990_baseboard.h"
-#include <linux/platform_data/video-pxafb.h>
-
-#include "devices.h"
-#include "generic.h"
-
-static unsigned long pcm990_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO112_MMC_CMD,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	/* USB */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-	/* PWM0 */
-	GPIO16_PWM0_OUT,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-};
-
-static void __iomem *pcm990_cpld_base;
-
-static u8 pcm990_cpld_readb(unsigned int reg)
-{
-	return readb(pcm990_cpld_base + reg);
-}
-
-static void pcm990_cpld_writeb(u8 value, unsigned int reg)
-{
-	writeb(value, pcm990_cpld_base + reg);
-}
-
-/*
- * pcm990_lcd_power - control power supply to the LCD
- * @on: 0 = switch off, 1 = switch on
- *
- * Called by the pxafb driver
- */
-#ifndef CONFIG_PCM990_DISPLAY_NONE
-static void pcm990_lcd_power(int on, struct fb_var_screeninfo *var)
-{
-	if (on) {
-		/* enable LCD-Latches
-		 * power on LCD
-		 */
-		pcm990_cpld_writeb(PCM990_CTRL_LCDPWR + PCM990_CTRL_LCDON,
-				PCM990_CTRL_REG3);
-	} else {
-		/* disable LCD-Latches
-		 * power off LCD
-		 */
-		pcm990_cpld_writeb(0, PCM990_CTRL_REG3);
-	}
-}
-#endif
-
-#if defined(CONFIG_PCM990_DISPLAY_SHARP)
-static struct pxafb_mode_info fb_info_sharp_lq084v1dg21 = {
-	.pixclock		= 28000,
-	.xres			= 640,
-	.yres			= 480,
-	.bpp			= 16,
-	.hsync_len		= 20,
-	.left_margin		= 103,
-	.right_margin		= 47,
-	.vsync_len		= 6,
-	.upper_margin		= 28,
-	.lower_margin		= 5,
-	.sync			= 0,
-	.cmap_greyscale		= 0,
-};
-
-static struct pxafb_mach_info pcm990_fbinfo __initdata = {
-	.modes			= &fb_info_sharp_lq084v1dg21,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_lcd_power	= pcm990_lcd_power,
-};
-#elif defined(CONFIG_PCM990_DISPLAY_NEC)
-struct pxafb_mode_info fb_info_nec_nl6448bc20_18d = {
-	.pixclock		= 39720,
-	.xres			= 640,
-	.yres			= 480,
-	.bpp			= 16,
-	.hsync_len		= 32,
-	.left_margin		= 16,
-	.right_margin		= 48,
-	.vsync_len		= 2,
-	.upper_margin		= 12,
-	.lower_margin		= 17,
-	.sync			= 0,
-	.cmap_greyscale		= 0,
-};
-
-static struct pxafb_mach_info pcm990_fbinfo __initdata = {
-	.modes			= &fb_info_nec_nl6448bc20_18d,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_lcd_power	= pcm990_lcd_power,
-};
-#endif
-
-static struct pwm_lookup pcm990_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data pcm990_backlight_data = {
-	.max_brightness	= 1023,
-	.dft_brightness	= 1023,
-};
-
-static struct platform_device pcm990_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent = &pxa27x_device_pwm0.dev,
-		.platform_data = &pcm990_backlight_data,
-	},
-};
-
-/*
- * The PCM-990 development baseboard uses PCM-027's hardware in the
- * following way:
- *
- * - LCD support is in use
- *  - GPIO16 is output for back light on/off with PWM
- *  - GPIO58 ... GPIO73 are outputs for display data
- *  - GPIO74 is output output for LCDFCLK
- *  - GPIO75 is output for LCDLCLK
- *  - GPIO76 is output for LCDPCLK
- *  - GPIO77 is output for LCDBIAS
- * - MMC support is in use
- *  - GPIO32 is output for MMCCLK
- *  - GPIO92 is MMDAT0
- *  - GPIO109 is MMDAT1
- *  - GPIO110 is MMCS0
- *  - GPIO111 is MMCS1
- *  - GPIO112 is MMCMD
- * - IDE/CF card is in use
- *  - GPIO48 is output /POE
- *  - GPIO49 is output /PWE
- *  - GPIO50 is output /PIOR
- *  - GPIO51 is output /PIOW
- *  - GPIO54 is output /PCE2
- *  - GPIO55 is output /PREG
- *  - GPIO56 is input /PWAIT
- *  - GPIO57 is output /PIOS16
- *  - GPIO79 is output PSKTSEL
- *  - GPIO85 is output /PCE1
- * - FFUART is in use
- *  - GPIO34 is input FFRXD
- *  - GPIO35 is input FFCTS
- *  - GPIO36 is input FFDCD
- *  - GPIO37 is input FFDSR
- *  - GPIO38 is input FFRI
- *  - GPIO39 is output FFTXD
- *  - GPIO40 is output FFDTR
- *  - GPIO41 is output FFRTS
- * - BTUART is in use
- *  - GPIO42 is input BTRXD
- *  - GPIO43 is output BTTXD
- *  - GPIO44 is input BTCTS
- *  - GPIO45 is output BTRTS
- * - IRUART is in use
- *  - GPIO46 is input STDRXD
- *  - GPIO47 is output STDTXD
- * - AC97 is in use*)
- *  - GPIO28 is input AC97CLK
- *  - GPIO29 is input AC97DatIn
- *  - GPIO30 is output AC97DatO
- *  - GPIO31 is output AC97SYNC
- *  - GPIO113 is output AC97_RESET
- * - SSP is in use
- *  - GPIO23 is output SSPSCLK
- *  - GPIO24 is output chip select to Max7301
- *  - GPIO25 is output SSPTXD
- *  - GPIO26 is input SSPRXD
- *  - GPIO27 is input for Max7301 IRQ
- *  - GPIO53 is input SSPSYSCLK
- * - SSP3 is in use
- *  - GPIO81 is output SSPTXD3
- *  - GPIO82 is input SSPRXD3
- *  - GPIO83 is output SSPSFRM
- *  - GPIO84 is output SSPCLK3
- *
- * Otherwise claimed GPIOs:
- * GPIO1 -> IRQ from user switch
- * GPIO9 -> IRQ from power management
- * GPIO10 -> IRQ from WML9712 AC97 controller
- * GPIO11 -> IRQ from IDE controller
- * GPIO12 -> IRQ from CF controller
- * GPIO13 -> IRQ from CF controller
- * GPIO14 -> GPIO free
- * GPIO15 -> /CS1 selects baseboard's Control CPLD (U7, 16 bit wide data path)
- * GPIO19 -> GPIO free
- * GPIO20 -> /SDCS2
- * GPIO21 -> /CS3 PC card socket select
- * GPIO33 -> /CS5  network controller select
- * GPIO78 -> /CS2  (16 bit wide data path)
- * GPIO80 -> /CS4  (16 bit wide data path)
- * GPIO86 -> GPIO free
- * GPIO87 -> GPIO free
- * GPIO90 -> LED0 on CPU module
- * GPIO91 -> LED1 on CPI module
- * GPIO117 -> SCL
- * GPIO118 -> SDA
- */
-
-static unsigned long pcm990_irq_enabled;
-
-static void pcm990_mask_ack_irq(struct irq_data *d)
-{
-	int pcm990_irq = (d->irq - PCM027_IRQ(0));
-
-	pcm990_irq_enabled &= ~(1 << pcm990_irq);
-
-	pcm990_cpld_writeb(pcm990_irq_enabled, PCM990_CTRL_INTMSKENA);
-}
-
-static void pcm990_unmask_irq(struct irq_data *d)
-{
-	int pcm990_irq = (d->irq - PCM027_IRQ(0));
-	u8 val;
-
-	/* the irq can be acknowledged only if deasserted, so it's done here */
-
-	pcm990_irq_enabled |= (1 << pcm990_irq);
-
-	val = pcm990_cpld_readb(PCM990_CTRL_INTSETCLR);
-	val |= 1 << pcm990_irq;
-	pcm990_cpld_writeb(val, PCM990_CTRL_INTSETCLR);
-
-	pcm990_cpld_writeb(pcm990_irq_enabled, PCM990_CTRL_INTMSKENA);
-}
-
-static struct irq_chip pcm990_irq_chip = {
-	.irq_mask_ack	= pcm990_mask_ack_irq,
-	.irq_unmask	= pcm990_unmask_irq,
-};
-
-static void pcm990_irq_handler(struct irq_desc *desc)
-{
-	unsigned int irq;
-	unsigned long pending;
-
-	pending = ~pcm990_cpld_readb(PCM990_CTRL_INTSETCLR);
-	pending &= pcm990_irq_enabled;
-
-	do {
-		/* clear our parent IRQ */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-		if (likely(pending)) {
-			irq = PCM027_IRQ(0) + __ffs(pending);
-			generic_handle_irq(irq);
-		}
-		pending = ~pcm990_cpld_readb(PCM990_CTRL_INTSETCLR);
-		pending &= pcm990_irq_enabled;
-	} while (pending);
-}
-
-static void __init pcm990_init_irq(void)
-{
-	int irq;
-
-	/* setup extra PCM990 irqs */
-	for (irq = PCM027_IRQ(0); irq <= PCM027_IRQ(3); irq++) {
-		irq_set_chip_and_handler(irq, &pcm990_irq_chip,
-					 handle_level_irq);
-		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
-	}
-
-	/* disable all Interrupts */
-	pcm990_cpld_writeb(0x0, PCM990_CTRL_INTMSKENA);
-	pcm990_cpld_writeb(0xff, PCM990_CTRL_INTSETCLR);
-
-	irq_set_chained_handler(PCM990_CTRL_INT_IRQ, pcm990_irq_handler);
-	irq_set_irq_type(PCM990_CTRL_INT_IRQ, PCM990_CTRL_INT_IRQ_EDGE);
-}
-
-static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int,
-			void *data)
-{
-	int err;
-
-	err = request_irq(PCM027_MMCDET_IRQ, mci_detect_int, 0,
-			     "MMC card detect", data);
-	if (err)
-		printk(KERN_ERR "pcm990_mci_init: MMC/SD: can't request MMC "
-				"card detect IRQ\n");
-
-	return err;
-}
-
-static int pcm990_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-	u8 val;
-
-	val = pcm990_cpld_readb(PCM990_CTRL_REG5);
-
-	if ((1 << vdd) & p_d->ocr_mask)
-		val |= PCM990_CTRL_MMC2PWR;
-	else
-		val &= ~PCM990_CTRL_MMC2PWR;
-
-	pcm990_cpld_writeb(PCM990_CTRL_MMC2PWR, PCM990_CTRL_REG5);
-	return 0;
-}
-
-static void pcm990_mci_exit(struct device *dev, void *data)
-{
-	free_irq(PCM027_MMCDET_IRQ, data);
-}
-
-#define MSECS_PER_JIFFY (1000/HZ)
-
-static struct pxamci_platform_data pcm990_mci_platform_data = {
-	.detect_delay_ms	= 250,
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.init 			= pcm990_mci_init,
-	.setpower 		= pcm990_mci_setpower,
-	.exit			= pcm990_mci_exit,
-};
-
-static struct pxaohci_platform_data pcm990_ohci_platform_data = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-	.power_on_delay	= 10,
-};
-
-/*
- * system init for baseboard usage. Will be called by pcm027 init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init pcm990_baseboard_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_pin_config));
-
-	pcm990_cpld_base = ioremap(PCM990_CTRL_PHYS, PCM990_CTRL_SIZE);
-	if (!pcm990_cpld_base) {
-		pr_err("pcm990: failed to ioremap cpld\n");
-		return;
-	}
-
-	/* register CPLD's IRQ controller */
-	pcm990_init_irq();
-
-#ifndef CONFIG_PCM990_DISPLAY_NONE
-	pxa_set_fb_info(NULL, &pcm990_fbinfo);
-#endif
-	pwm_add_table(pcm990_pwm_lookup, ARRAY_SIZE(pcm990_pwm_lookup));
-	platform_device_register(&pcm990_backlight_device);
-
-	/* MMC */
-	pxa_set_mci_info(&pcm990_mci_platform_data);
-
-	/* USB host */
-	pxa_set_ohci_info(&pcm990_ohci_platform_data);
-
-	pxa_set_i2c_info(NULL);
-	pxa_set_ac97_info(NULL);
-
-	printk(KERN_INFO "PCM-990 Evaluation baseboard initialized\n");
-}
diff --git a/arch/arm/mach-pxa/pcm990_baseboard.h b/arch/arm/mach-pxa/pcm990_baseboard.h
deleted file mode 100644
index 18cf71decb03..000000000000
--- a/arch/arm/mach-pxa/pcm990_baseboard.h
+++ /dev/null
@@ -1,199 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
- *
- * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
- * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
- */
-
-#include "pcm027.h"
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
-
-/*
- * definitions relevant only when the PCM-990
- * development base board is in use
- */
-
-/* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */
-#define PCM990_CTRL_INT_IRQ_GPIO	9
-#define PCM990_CTRL_INT_IRQ		PXA_GPIO_TO_IRQ(PCM990_CTRL_INT_IRQ_GPIO)
-#define PCM990_CTRL_INT_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-#define PCM990_CTRL_PHYS		PXA_CS1_PHYS	/* 16-Bit */
-#define PCM990_CTRL_SIZE		(1*1024*1024)
-
-#define PCM990_CTRL_PWR_IRQ_GPIO	14
-#define PCM990_CTRL_PWR_IRQ		PXA_GPIO_TO_IRQ(PCM990_CTRL_PWR_IRQ_GPIO)
-#define PCM990_CTRL_PWR_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-
-/* visible CPLD (U7) registers */
-#define PCM990_CTRL_REG0	0x0000	/* RESET REGISTER */
-#define PCM990_CTRL_SYSRES	0x0001	/* System RESET REGISTER */
-#define PCM990_CTRL_RESOUT	0x0002	/* RESETOUT Enable REGISTER */
-#define PCM990_CTRL_RESGPIO	0x0004	/* RESETGPIO Enable REGISTER */
-
-#define PCM990_CTRL_REG1	0x0002	/* Power REGISTER */
-#define PCM990_CTRL_5VOFF	0x0001	/* Disable  5V Regulators */
-#define PCM990_CTRL_CANPWR	0x0004	/* Enable CANPWR ADUM */
-#define PCM990_CTRL_PM_5V	0x0008	/* Read 5V OK */
-
-#define PCM990_CTRL_REG2	0x0004	/* LED REGISTER */
-#define PCM990_CTRL_LEDPWR	0x0001	/* POWER LED enable */
-#define PCM990_CTRL_LEDBAS	0x0002	/* BASIS LED enable */
-#define PCM990_CTRL_LEDUSR	0x0004	/* USER LED enable */
-
-#define PCM990_CTRL_REG3	0x0006	/* LCD CTRL REGISTER 3 */
-#define PCM990_CTRL_LCDPWR	0x0001	/* RW LCD Power on */
-#define PCM990_CTRL_LCDON	0x0002	/* RW LCD Latch on */
-#define PCM990_CTRL_LCDPOS1	0x0004	/* RW POS 1 */
-#define PCM990_CTRL_LCDPOS2	0x0008	/* RW POS 2 */
-
-#define PCM990_CTRL_REG4	0x0008	/* MMC1 CTRL REGISTER 4 */
-#define PCM990_CTRL_MMC1PWR	0x0001 /* RW MMC1 Power on */
-
-#define PCM990_CTRL_REG5	0x000A	/* MMC2 CTRL REGISTER 5 */
-#define PCM990_CTRL_MMC2PWR	0x0001	/* RW MMC2 Power on */
-#define PCM990_CTRL_MMC2LED	0x0002	/* RW MMC2 LED */
-#define PCM990_CTRL_MMC2DE	0x0004	/* R MMC2 Card detect */
-#define PCM990_CTRL_MMC2WP	0x0008	/* R MMC2 Card write protect */
-
-#define PCM990_CTRL_INTSETCLR	0x000C	/* Interrupt Clear REGISTER */
-#define PCM990_CTRL_INTC0	0x0001	/* Clear Reg BT Detect */
-#define PCM990_CTRL_INTC1	0x0002	/* Clear Reg FR RI */
-#define PCM990_CTRL_INTC2	0x0004	/* Clear Reg MMC1 Detect */
-#define PCM990_CTRL_INTC3	0x0008	/* Clear Reg PM_5V off */
-
-#define PCM990_CTRL_INTMSKENA	0x000E	/* Interrupt Enable REGISTER */
-#define PCM990_CTRL_ENAINT0	0x0001	/* Enable Int BT Detect */
-#define PCM990_CTRL_ENAINT1	0x0002	/* Enable Int FR RI */
-#define PCM990_CTRL_ENAINT2	0x0004	/* Enable Int MMC1 Detect */
-#define PCM990_CTRL_ENAINT3	0x0008	/* Enable Int PM_5V off */
-
-#define PCM990_CTRL_REG8	0x0014	/* Uart REGISTER */
-#define PCM990_CTRL_FFSD	0x0001	/* BT Uart Enable */
-#define PCM990_CTRL_BTSD	0x0002	/* FF Uart Enable */
-#define PCM990_CTRL_FFRI	0x0004	/* FF Uart RI detect */
-#define PCM990_CTRL_BTRX	0x0008	/* BT Uart Rx detect */
-
-#define PCM990_CTRL_REG9	0x0010	/* AC97 Flash REGISTER */
-#define PCM990_CTRL_FLWP	0x0001	/* pC Flash Write Protect */
-#define PCM990_CTRL_FLDIS	0x0002	/* pC Flash Disable */
-#define PCM990_CTRL_AC97ENA	0x0004	/* Enable AC97 Expansion */
-
-#define PCM990_CTRL_REG10	0x0012	/* GPS-REGISTER */
-#define PCM990_CTRL_GPSPWR	0x0004	/* GPS-Modul Power on */
-#define PCM990_CTRL_GPSENA	0x0008	/* GPS-Modul Enable */
-
-#define PCM990_CTRL_REG11	0x0014	/* Accu REGISTER */
-#define PCM990_CTRL_ACENA	0x0001	/* Charge Enable */
-#define PCM990_CTRL_ACSEL	0x0002	/* Charge Akku -> DC Enable */
-#define PCM990_CTRL_ACPRES	0x0004	/* DC Present */
-#define PCM990_CTRL_ACALARM	0x0008	/* Error Akku */
-
-/*
- * IDE
- */
-#define PCM990_IDE_IRQ_GPIO	13
-#define PCM990_IDE_IRQ		PXA_GPIO_TO_IRQ(PCM990_IDE_IRQ_GPIO)
-#define PCM990_IDE_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-#define PCM990_IDE_PLD_PHYS	0x20000000	/* 16 bit wide */
-#define PCM990_IDE_PLD_BASE	0xee000000
-#define PCM990_IDE_PLD_SIZE	(1*1024*1024)
-
-/* visible CPLD (U6) registers */
-#define PCM990_IDE_PLD_REG0	0x1000	/* OFFSET IDE REGISTER 0 */
-#define PCM990_IDE_PM5V		0x0004	/* R System VCC_5V */
-#define PCM990_IDE_STBY		0x0008	/* R System StandBy */
-
-#define PCM990_IDE_PLD_REG1	0x1002	/* OFFSET IDE REGISTER 1 */
-#define PCM990_IDE_IDEMODE	0x0001	/* R TrueIDE Mode */
-#define PCM990_IDE_DMAENA	0x0004	/* RW DMA Enable */
-#define PCM990_IDE_DMA1_0	0x0008	/* RW 1=DREQ1 0=DREQ0 */
-
-#define PCM990_IDE_PLD_REG2	0x1004	/* OFFSET IDE REGISTER 2 */
-#define PCM990_IDE_RESENA	0x0001	/* RW IDE Reset Bit enable */
-#define PCM990_IDE_RES		0x0002	/* RW IDE Reset Bit */
-#define PCM990_IDE_RDY		0x0008	/* RDY */
-
-#define PCM990_IDE_PLD_REG3	0x1006	/* OFFSET IDE REGISTER 3 */
-#define PCM990_IDE_IDEOE	0x0001	/* RW Latch on Databus */
-#define PCM990_IDE_IDEON	0x0002	/* RW Latch on Control Address */
-#define PCM990_IDE_IDEIN	0x0004	/* RW Latch on Interrupt usw. */
-
-#define PCM990_IDE_PLD_REG4	0x1008	/* OFFSET IDE REGISTER 4 */
-#define PCM990_IDE_PWRENA	0x0001	/* RW IDE Power enable */
-#define PCM990_IDE_5V		0x0002	/* R IDE Power 5V */
-#define PCM990_IDE_PWG		0x0008	/* R IDE Power is on */
-
-#define PCM990_IDE_PLD_P2V(x) ((x) - PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_BASE)
-#define PCM990_IDE_PLD_V2P(x) ((x) - PCM990_IDE_PLD_BASE + PCM990_IDE_PLD_PHYS)
-
-/*
- * Compact Flash
- */
-#define PCM990_CF_IRQ_GPIO	11
-#define PCM990_CF_IRQ		PXA_GPIO_TO_IRQ(PCM990_CF_IRQ_GPIO)
-#define PCM990_CF_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-
-#define PCM990_CF_CD_GPIO	12
-#define PCM990_CF_CD		PXA_GPIO_TO_IRQ(PCM990_CF_CD_GPIO)
-#define PCM990_CF_CD_EDGE	IRQ_TYPE_EDGE_RISING
-
-#define PCM990_CF_PLD_PHYS	0x30000000	/* 16 bit wide */
-
-/* visible CPLD (U6) registers */
-#define PCM990_CF_PLD_REG0	0x1000	/* OFFSET CF REGISTER 0 */
-#define PCM990_CF_REG0_LED	0x0001	/* RW LED on */
-#define PCM990_CF_REG0_BLK	0x0002	/* RW LED flash when access */
-#define PCM990_CF_REG0_PM5V	0x0004	/* R System VCC_5V enable */
-#define PCM990_CF_REG0_STBY	0x0008	/* R System StandBy */
-
-#define PCM990_CF_PLD_REG1	0x1002	/* OFFSET CF REGISTER 1 */
-#define PCM990_CF_REG1_IDEMODE	0x0001	/* RW CF card run as TrueIDE */
-#define PCM990_CF_REG1_CF0	0x0002	/* RW CF card at ADDR 0x28000000 */
-
-#define PCM990_CF_PLD_REG2	0x1004	/* OFFSET CF REGISTER 2 */
-#define PCM990_CF_REG2_RES	0x0002	/* RW CF RESET BIT */
-#define PCM990_CF_REG2_RDYENA	0x0004	/* RW Enable CF_RDY */
-#define PCM990_CF_REG2_RDY	0x0008	/* R CF_RDY auf PWAIT */
-
-#define PCM990_CF_PLD_REG3	0x1006	/* OFFSET CF REGISTER 3 */
-#define PCM990_CF_REG3_CFOE	0x0001	/* RW Latch on Databus */
-#define PCM990_CF_REG3_CFON	0x0002	/* RW Latch on Control Address */
-#define PCM990_CF_REG3_CFIN	0x0004	/* RW Latch on Interrupt usw. */
-#define PCM990_CF_REG3_CFCD	0x0008	/* RW Latch on CD1/2 VS1/2 usw */
-
-#define PCM990_CF_PLD_REG4	0x1008	/* OFFSET CF REGISTER 4 */
-#define PCM990_CF_REG4_PWRENA	0x0001	/* RW CF Power on (CD1/2 = "00") */
-#define PCM990_CF_REG4_5_3V	0x0002	/* RW 1 = 5V CF_VCC 0 = 3 V CF_VCC */
-#define PCM990_CF_REG4_3B	0x0004	/* RW 3.0V Backup from VCC (5_3V=0) */
-#define PCM990_CF_REG4_PWG	0x0008	/* R CF-Power is on */
-
-#define PCM990_CF_PLD_REG5	0x100A	/* OFFSET CF REGISTER 5 */
-#define PCM990_CF_REG5_BVD1	0x0001	/* R CF /BVD1 */
-#define PCM990_CF_REG5_BVD2	0x0002	/* R CF /BVD2 */
-#define PCM990_CF_REG5_VS1	0x0004	/* R CF /VS1 */
-#define PCM990_CF_REG5_VS2	0x0008	/* R CF /VS2 */
-
-#define PCM990_CF_PLD_REG6	0x100C	/* OFFSET CF REGISTER 6 */
-#define PCM990_CF_REG6_CD1	0x0001	/* R CF Card_Detect1 */
-#define PCM990_CF_REG6_CD2	0x0002	/* R CF Card_Detect2 */
-
-/*
- * Wolfson AC97 Touch
- */
-#define PCM990_AC97_IRQ_GPIO	10
-#define PCM990_AC97_IRQ		PXA_GPIO_TO_IRQ(PCM990_AC97_IRQ_GPIO)
-#define PCM990_AC97_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
-
-/*
- * MMC phyCORE
- */
-#define PCM990_MMC0_IRQ_GPIO	9
-#define PCM990_MMC0_IRQ		PXA_GPIO_TO_IRQ(PCM990_MMC0_IRQ_GPIO)
-#define PCM990_MMC0_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
-
-/*
- * USB phyCore
- */
-#define PCM990_USB_OVERCURRENT (88 | GPIO_ALT_FN_1_IN)
-#define PCM990_USB_PWR_EN (89 | GPIO_ALT_FN_2_OUT)
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index f2237f471750..c63e854921ea 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -51,8 +51,6 @@ int pxa_pm_enter(suspend_state_t state)
 		/* if invalid, display message and wait for a hardware reset */
 		if (checksum != sleep_save_checksum) {
 
-			lubbock_set_hexled(0xbadbadc5);
-
 			while (1)
 				pxa_cpu_pm_fns->enter(state);
 		}
diff --git a/arch/arm/mach-pxa/pm.h b/arch/arm/mach-pxa/pm.h
index 00ea3529e30e..a16fa140883c 100644
--- a/arch/arm/mach-pxa/pm.h
+++ b/arch/arm/mach-pxa/pm.h
@@ -27,13 +27,3 @@ extern void pxa_pm_finish(void);
 
 extern const char pm_enter_standby_start[], pm_enter_standby_end[];
 extern int pxa3xx_finish_suspend(unsigned long);
-
-/* NOTE: this is for PM debugging on Lubbock,  it's really a big
- * ugly, but let's keep the crap minimum here, instead of direct
- * accessing the LUBBOCK CPLD registers in arch/arm/mach-pxa/pm.c
- */
-#ifdef CONFIG_ARCH_LUBBOCK
-extern void lubbock_set_hexled(uint32_t value);
-#else
-#define lubbock_set_hexled(x)
-#endif
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
deleted file mode 100644
index 7772a39430ed..000000000000
--- a/arch/arm/mach-pxa/poodle.c
+++ /dev/null
@@ -1,484 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/poodle.c
- *
- *  Support for the SHARP Poodle Board.
- *
- * Based on:
- *  linux/arch/arm/mach-pxa/lubbock.c Author:	Nicolas Pitre
- *
- * Change Log
- *  12-Dec-2002 Sharp Corporation for Poodle
- *  John Lenz <lenz@cs.wisc.edu> updates to 2.6
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/export.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/pm.h>
-#include <linux/delay.h>
-#include <linux/mtd/physmap.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/regulator/machine.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/mtd/sharpsl.h>
-#include <linux/memblock.h>
-
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/setup.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "pxa25x.h"
-#include "udc.h"
-#include "poodle.h"
-
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/asoc-poodle.h>
-
-#include <asm/hardware/scoop.h>
-#include <asm/hardware/locomo.h>
-#include <asm/mach/sharpsl_param.h>
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned long poodle_pin_config[] __initdata = {
-	/* I/O */
-	GPIO79_nCS_3,
-	GPIO80_nCS_4,
-	GPIO18_RDY,
-
-	/* Clock */
-	GPIO12_32KHz,
-
-	/* SSP1 */
-	GPIO23_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-	GPIO24_GPIO,	/* POODLE_GPIO_TP_CS - SFRM as chip select */
-
-	/* I2S */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO30_I2S_SDATA_OUT,
-	GPIO31_I2S_SYNC,
-	GPIO32_I2S_SYSCLK,
-
-	/* Infra-Red */
-	GPIO47_FICP_TXD,
-	GPIO46_FICP_RXD,
-
-	/* FFUART */
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-	GPIO39_FFUART_TXD,
-	GPIO37_FFUART_DSR,
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* PC Card */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-
-	/* GPIO */
-	GPIO9_GPIO,	/* POODLE_GPIO_nSD_DETECT */
-	GPIO7_GPIO,	/* POODLE_GPIO_nSD_WP */
-	GPIO3_GPIO,	/* POODLE_GPIO_SD_PWR */
-	GPIO33_GPIO,	/* POODLE_GPIO_SD_PWR1 */
-
-	GPIO20_GPIO,	/* POODLE_GPIO_USB_PULLUP */
-	GPIO22_GPIO,	/* POODLE_GPIO_IR_ON */
-};
-
-static struct resource poodle_scoop_resources[] = {
-	[0] = {
-		.start		= 0x10800000,
-		.end		= 0x10800fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct scoop_config poodle_scoop_setup = {
-	.io_dir		= POODLE_SCOOP_IO_DIR,
-	.io_out		= POODLE_SCOOP_IO_OUT,
-	.gpio_base	= POODLE_SCOOP_GPIO_BASE,
-};
-
-struct platform_device poodle_scoop_device = {
-	.name		= "sharp-scoop",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &poodle_scoop_setup,
-	},
-	.num_resources	= ARRAY_SIZE(poodle_scoop_resources),
-	.resource	= poodle_scoop_resources,
-};
-
-static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
-{
-	.dev        = &poodle_scoop_device.dev,
-	.irq        = POODLE_IRQ_GPIO_CF_IRQ,
-	.cd_irq     = POODLE_IRQ_GPIO_CF_CD,
-	.cd_irq_str = "PCMCIA0 CD",
-},
-};
-
-static struct scoop_pcmcia_config poodle_pcmcia_config = {
-	.devs         = &poodle_pcmcia_scoop[0],
-	.num_devs     = 1,
-};
-
-EXPORT_SYMBOL(poodle_scoop_device);
-
-/* LoCoMo device */
-static struct resource locomo_resources[] = {
-	[0] = {
-		.start		= 0x10000000,
-		.end		= 0x10001fff,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= PXA_GPIO_TO_IRQ(10),
-		.end		= PXA_GPIO_TO_IRQ(10),
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct locomo_platform_data locomo_info = {
-	.irq_base	= IRQ_BOARD_START,
-};
-
-static struct platform_device poodle_locomo_device = {
-	.name		= "locomo",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(locomo_resources),
-	.resource	= locomo_resources,
-	.dev		= {
-		.platform_data	= &locomo_info,
-	},
-};
-
-static struct poodle_audio_platform_data poodle_audio_pdata = {
-	.locomo_dev	= &poodle_locomo_device.dev,
-
-	.gpio_amp_on   	= POODLE_LOCOMO_GPIO_AMP_ON,
-	.gpio_mute_l   	= POODLE_LOCOMO_GPIO_MUTE_L,
-	.gpio_mute_r   	= POODLE_LOCOMO_GPIO_MUTE_R,
-	.gpio_232vcc_on	= POODLE_LOCOMO_GPIO_232VCC_ON,
-	.gpio_jk_b     	= POODLE_LOCOMO_GPIO_JK_B,
-};
-
-static struct platform_device poodle_audio_device = {
-	.name	= "poodle-audio",
-	.id	= -1,
-	.dev.platform_data = &poodle_audio_pdata,
-};
-
-#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static struct pxa2xx_spi_controller poodle_spi_info = {
-	.num_chipselect	= 1,
-};
-
-static struct gpiod_lookup_table poodle_spi_gpio_table = {
-	.dev_id = "pxa2xx-spi.1",
-	.table = {
-		GPIO_LOOKUP_IDX("gpio-pxa", POODLE_GPIO_TP_CS, "cs", 0, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct ads7846_platform_data poodle_ads7846_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.gpio_pendown		= POODLE_GPIO_TP_INT,
-};
-
-static struct spi_board_info poodle_spi_devices[] = {
-	{
-		.modalias	= "ads7846",
-		.max_speed_hz	= 10000,
-		.bus_num	= 1,
-		.platform_data	= &poodle_ads7846_info,
-		.irq		= PXA_GPIO_TO_IRQ(POODLE_GPIO_TP_INT),
-	},
-};
-
-static void __init poodle_init_spi(void)
-{
-	gpiod_add_lookup_table(&poodle_spi_gpio_table);
-	pxa2xx_set_spi_info(1, &poodle_spi_info);
-	spi_register_board_info(ARRAY_AND_SIZE(poodle_spi_devices));
-}
-#else
-static inline void poodle_init_spi(void) {}
-#endif
-
-/*
- * MMC/SD Device
- *
- * The card detect interrupt isn't debounced so we delay it by 250ms
- * to give the card a chance to fully insert/eject.
- */
-static int poodle_mci_init(struct device *dev, irq_handler_t poodle_detect_int, void *data)
-{
-	int err;
-
-	err = gpio_request(POODLE_GPIO_SD_PWR, "SD_PWR");
-	if (err)
-		goto err_free_2;
-
-	err = gpio_request(POODLE_GPIO_SD_PWR1, "SD_PWR1");
-	if (err)
-		goto err_free_3;
-
-	gpio_direction_output(POODLE_GPIO_SD_PWR, 0);
-	gpio_direction_output(POODLE_GPIO_SD_PWR1, 0);
-
-	return 0;
-
-err_free_3:
-	gpio_free(POODLE_GPIO_SD_PWR);
-err_free_2:
-	return err;
-}
-
-static int poodle_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data* p_d = dev->platform_data;
-
-	if ((1 << vdd) & p_d->ocr_mask) {
-		gpio_set_value(POODLE_GPIO_SD_PWR, 1);
-		mdelay(2);
-		gpio_set_value(POODLE_GPIO_SD_PWR1, 1);
-	} else {
-		gpio_set_value(POODLE_GPIO_SD_PWR1, 0);
-		gpio_set_value(POODLE_GPIO_SD_PWR, 0);
-	}
-
-	return 0;
-}
-
-static void poodle_mci_exit(struct device *dev, void *data)
-{
-	gpio_free(POODLE_GPIO_SD_PWR1);
-	gpio_free(POODLE_GPIO_SD_PWR);
-}
-
-static struct pxamci_platform_data poodle_mci_platform_data = {
-	.detect_delay_ms	= 250,
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 			= poodle_mci_init,
-	.setpower 		= poodle_mci_setpower,
-	.exit			= poodle_mci_exit,
-};
-
-static struct gpiod_lookup_table poodle_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", POODLE_GPIO_nSD_DETECT,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", POODLE_GPIO_nSD_WP,
-			    "wp", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-/*
- * Irda
- */
-static struct pxaficp_platform_data poodle_ficp_platform_data = {
-	.gpio_pwdown		= POODLE_GPIO_IR_ON,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-
-/*
- * USB Device Controller
- */
-static struct pxa2xx_udc_mach_info udc_info __initdata = {
-	/* no connect GPIO; poodle can't tell connection status */
-	.gpio_pullup	= POODLE_GPIO_USB_PULLUP,
-};
-
-
-/* PXAFB device */
-static struct pxafb_mode_info poodle_fb_mode = {
-	.pixclock	= 144700,
-	.xres		= 320,
-	.yres		= 240,
-	.bpp		= 16,
-	.hsync_len	= 7,
-	.left_margin	= 11,
-	.right_margin	= 30,
-	.vsync_len	= 2,
-	.upper_margin	= 2,
-	.lower_margin	= 0,
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info poodle_fb_info = {
-	.modes		= &poodle_fb_mode,
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP,
-};
-
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr sharpsl_bbt = {
-	.options = 0,
-	.offs = 4,
-	.len = 2,
-	.pattern = scan_ff_pattern
-};
-
-static const char * const probes[] = {
-	"cmdlinepart",
-	"ofpart",
-	"sharpslpart",
-	NULL,
-};
-
-static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
-	.badblock_pattern	= &sharpsl_bbt,
-	.part_parsers		= probes,
-};
-
-static struct resource sharpsl_nand_resources[] = {
-	{
-		.start	= 0x0C000000,
-		.end	= 0x0C000FFF,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device sharpsl_nand_device = {
-	.name		= "sharpsl-nand",
-	.id		= -1,
-	.resource	= sharpsl_nand_resources,
-	.num_resources	= ARRAY_SIZE(sharpsl_nand_resources),
-	.dev.platform_data	= &sharpsl_nand_platform_data,
-};
-
-static struct mtd_partition sharpsl_rom_parts[] = {
-	{
-		.name	="Boot PROM Filesystem",
-		.offset	= 0x00120000,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data sharpsl_rom_data = {
-	.width		= 2,
-	.nr_parts	= ARRAY_SIZE(sharpsl_rom_parts),
-	.parts		= sharpsl_rom_parts,
-};
-
-static struct resource sharpsl_rom_resources[] = {
-	{
-		.start	= 0x00000000,
-		.end	= 0x007fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device sharpsl_rom_device = {
-	.name	= "physmap-flash",
-	.id	= -1,
-	.resource = sharpsl_rom_resources,
-	.num_resources = ARRAY_SIZE(sharpsl_rom_resources),
-	.dev.platform_data = &sharpsl_rom_data,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&poodle_locomo_device,
-	&poodle_scoop_device,
-	&poodle_audio_device,
-	&sharpsl_nand_device,
-	&sharpsl_rom_device,
-};
-
-static struct i2c_board_info __initdata poodle_i2c_devices[] = {
-	{ I2C_BOARD_INFO("wm8731", 0x1b) },
-};
-
-static void poodle_poweroff(void)
-{
-	pxa_restart(REBOOT_HARD, NULL);
-}
-
-static void __init poodle_init(void)
-{
-	int ret = 0;
-
-	pm_power_off = poodle_poweroff;
-
-	PCFR |= PCFR_OPDE;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(poodle_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	platform_scoop_config = &poodle_pcmcia_config;
-
-	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
-	if (ret)
-		pr_warn("poodle: Unable to register LoCoMo device\n");
-
-	pxa_set_fb_info(&poodle_locomo_device.dev, &poodle_fb_info);
-	pxa_set_udc_info(&udc_info);
-	gpiod_add_lookup_table(&poodle_mci_gpio_table);
-	pxa_set_mci_info(&poodle_mci_platform_data);
-	pxa_set_ficp_info(&poodle_ficp_platform_data);
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(poodle_i2c_devices));
-	poodle_init_spi();
-	regulator_has_full_constraints();
-}
-
-static void __init fixup_poodle(struct tag *tags, char **cmdline)
-{
-	sharpsl_save_param();
-	memblock_add(0xa0000000, SZ_32M);
-}
-
-MACHINE_START(POODLE, "SHARP Poodle")
-	.fixup		= fixup_poodle,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= POODLE_NR_IRQS,	/* 4 for LoCoMo */
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= poodle_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/poodle.h b/arch/arm/mach-pxa/poodle.h
deleted file mode 100644
index 00798b44f204..000000000000
--- a/arch/arm/mach-pxa/poodle.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/poodle.h
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Based on:
- *   arch/arm/mach-sa1100/include/mach/collie.h
- *
- * ChangeLog:
- *   04-06-2001 Lineo Japan, Inc.
- *   04-16-2001 SHARP Corporation
- *   Update to 2.6 John Lenz
- */
-#ifndef __ASM_ARCH_POODLE_H
-#define __ASM_ARCH_POODLE_H  1
-
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
-
-/*
- * GPIOs
- */
-/* PXA GPIOs */
-#define POODLE_GPIO_ON_KEY		(0)
-#define POODLE_GPIO_AC_IN		(1)
-#define POODLE_GPIO_CO			16
-#define POODLE_GPIO_TP_INT		(5)
-#define POODLE_GPIO_TP_CS		(24)
-#define POODLE_GPIO_WAKEUP		(11)	/* change battery */
-#define POODLE_GPIO_GA_INT		(10)
-#define POODLE_GPIO_IR_ON		(22)
-#define POODLE_GPIO_HP_IN		(4)
-#define POODLE_GPIO_CF_IRQ		(17)
-#define POODLE_GPIO_CF_CD		(14)
-#define POODLE_GPIO_CF_STSCHG		(14)
-#define POODLE_GPIO_SD_PWR		(33)
-#define POODLE_GPIO_SD_PWR1		(3)
-#define POODLE_GPIO_nSD_CLK		(6)
-#define POODLE_GPIO_nSD_WP		(7)
-#define POODLE_GPIO_nSD_INT		(8)
-#define POODLE_GPIO_nSD_DETECT		(9)
-#define POODLE_GPIO_MAIN_BAT_LOW	(13)
-#define POODLE_GPIO_BAT_COVER		(13)
-#define POODLE_GPIO_USB_PULLUP		(20)
-#define POODLE_GPIO_ADC_TEMP_ON		(21)
-#define POODLE_GPIO_BYPASS_ON		(36)
-#define POODLE_GPIO_CHRG_ON		(38)
-#define POODLE_GPIO_CHRG_FULL		(16)
-#define POODLE_GPIO_DISCHARGE_ON        (42) /* Enable battery discharge */
-
-/* PXA GPIOs */
-#define POODLE_IRQ_GPIO_ON_KEY		PXA_GPIO_TO_IRQ(0)
-#define POODLE_IRQ_GPIO_AC_IN		PXA_GPIO_TO_IRQ(1)
-#define POODLE_IRQ_GPIO_HP_IN		PXA_GPIO_TO_IRQ(4)
-#define POODLE_IRQ_GPIO_CO		PXA_GPIO_TO_IRQ(16)
-#define POODLE_IRQ_GPIO_TP_INT		PXA_GPIO_TO_IRQ(5)
-#define POODLE_IRQ_GPIO_WAKEUP		PXA_GPIO_TO_IRQ(11)
-#define POODLE_IRQ_GPIO_GA_INT		PXA_GPIO_TO_IRQ(10)
-#define POODLE_IRQ_GPIO_CF_IRQ		PXA_GPIO_TO_IRQ(17)
-#define POODLE_IRQ_GPIO_CF_CD		PXA_GPIO_TO_IRQ(14)
-#define POODLE_IRQ_GPIO_nSD_INT		PXA_GPIO_TO_IRQ(8)
-#define POODLE_IRQ_GPIO_nSD_DETECT	PXA_GPIO_TO_IRQ(9)
-#define POODLE_IRQ_GPIO_MAIN_BAT_LOW	PXA_GPIO_TO_IRQ(13)
-
-/* SCOOP GPIOs */
-#define POODLE_SCOOP_CHARGE_ON	SCOOP_GPCR_PA11
-#define POODLE_SCOOP_CP401	SCOOP_GPCR_PA13
-#define POODLE_SCOOP_VPEN	SCOOP_GPCR_PA18
-#define POODLE_SCOOP_L_PCLK	SCOOP_GPCR_PA20
-#define POODLE_SCOOP_L_LCLK	SCOOP_GPCR_PA21
-#define POODLE_SCOOP_HS_OUT	SCOOP_GPCR_PA22
-
-#define POODLE_SCOOP_IO_DIR	( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT )
-#define POODLE_SCOOP_IO_OUT	( 0 )
-
-#define POODLE_SCOOP_GPIO_BASE	(PXA_NR_BUILTIN_GPIO)
-#define POODLE_GPIO_CHARGE_ON	(POODLE_SCOOP_GPIO_BASE + 0)
-#define POODLE_GPIO_CP401	(POODLE_SCOOP_GPIO_BASE + 2)
-#define POODLE_GPIO_VPEN	(POODLE_SCOOP_GPIO_BASE + 7)
-#define POODLE_GPIO_L_PCLK	(POODLE_SCOOP_GPIO_BASE + 9)
-#define POODLE_GPIO_L_LCLK	(POODLE_SCOOP_GPIO_BASE + 10)
-#define POODLE_GPIO_HS_OUT	(POODLE_SCOOP_GPIO_BASE + 11)
-
-#define POODLE_LOCOMO_GPIO_AMP_ON      LOCOMO_GPIO(8)
-#define POODLE_LOCOMO_GPIO_MUTE_L      LOCOMO_GPIO(10)
-#define POODLE_LOCOMO_GPIO_MUTE_R      LOCOMO_GPIO(11)
-#define POODLE_LOCOMO_GPIO_232VCC_ON   LOCOMO_GPIO(12)
-#define POODLE_LOCOMO_GPIO_JK_B        LOCOMO_GPIO(13)
-
-#define POODLE_NR_IRQS		(IRQ_BOARD_START + 4)	/* 4 for LoCoMo */
-
-#endif /* __ASM_ARCH_POODLE_H  */
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 6b34d7c169ea..1b83be181bab 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -145,13 +145,6 @@ void __init pxa25x_init_irq(void)
 	pxa_init_irq(32, pxa25x_set_wake);
 }
 
-#ifdef CONFIG_CPU_PXA26x
-void __init pxa26x_init_irq(void)
-{
-	pxa_init_irq(32, pxa25x_set_wake);
-}
-#endif
-
 static int __init __init
 pxa25x_dt_init_irq(struct device_node *node, struct device_node *parent)
 {
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index eea507fd5095..4135ba2877c4 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -85,18 +85,6 @@ EXPORT_SYMBOL_GPL(pxa27x_configure_ac97reset);
  */
 static unsigned int pwrmode = PWRMODE_SLEEP;
 
-int pxa27x_set_pwrmode(unsigned int mode)
-{
-	switch (mode) {
-	case PWRMODE_SLEEP:
-	case PWRMODE_DEEPSLEEP:
-		pwrmode = mode;
-		return 0;
-	}
-
-	return -EINVAL;
-}
-
 /*
  * List of global PXA peripheral registers to preserve.
  * More ones like CP and general purpose register values are preserved
@@ -109,7 +97,7 @@ enum {
 	SLEEP_SAVE_COUNT
 };
 
-void pxa27x_cpu_pm_save(unsigned long *sleep_save)
+static void pxa27x_cpu_pm_save(unsigned long *sleep_save)
 {
 	sleep_save[SLEEP_SAVE_MDREFR] = __raw_readl(MDREFR);
 	SAVE(PCFR);
@@ -117,7 +105,7 @@ void pxa27x_cpu_pm_save(unsigned long *sleep_save)
 	SAVE(PSTR);
 }
 
-void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
+static void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
 {
 	__raw_writel(sleep_save[SLEEP_SAVE_MDREFR], MDREFR);
 	RESTORE(PCFR);
@@ -127,7 +115,7 @@ void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
 	RESTORE(PSTR);
 }
 
-void pxa27x_cpu_pm_enter(suspend_state_t state)
+static void pxa27x_cpu_pm_enter(suspend_state_t state)
 {
 	extern void pxa_cpu_standby(void);
 #ifndef CONFIG_IWMMXT
diff --git a/arch/arm/mach-pxa/pxa27x.h b/arch/arm/mach-pxa/pxa27x.h
index ede96f3f7214..c9d9948ae7d1 100644
--- a/arch/arm/mach-pxa/pxa27x.h
+++ b/arch/arm/mach-pxa/pxa27x.h
@@ -20,7 +20,4 @@
 #define ARB_CORE_PARK		(1<<24)	   /* Be parked with core when idle */
 #define ARB_LOCK_FLAG		(1<<23)	   /* Only Locking masters gain access to the bus */
 
-extern int pxa27x_set_pwrmode(unsigned int mode);
-extern void pxa27x_cpu_pm_enter(suspend_state_t state);
-
 #endif /* __MACH_PXA27x_H */
diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c
index 4aafd692c1e8..35c23a5d73a3 100644
--- a/arch/arm/mach-pxa/pxa2xx.c
+++ b/arch/arm/mach-pxa/pxa2xx.c
@@ -18,7 +18,6 @@
 #include "reset.h"
 #include "smemc.h"
 #include <linux/soc/pxa/smemc.h>
-#include <linux/platform_data/irda-pxaficp.h>
 
 void pxa2xx_clear_reset_status(unsigned int mask)
 {
@@ -26,34 +25,6 @@ void pxa2xx_clear_reset_status(unsigned int mask)
 	RCSR = mask;
 }
 
-static unsigned long pxa2xx_mfp_fir[] = {
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-};
-
-static unsigned long pxa2xx_mfp_sir[] = {
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-};
-
-static unsigned long pxa2xx_mfp_off[] = {
-	GPIO46_GPIO | MFP_LPM_DRIVE_LOW,
-	GPIO47_GPIO | MFP_LPM_DRIVE_LOW,
-};
-
-void pxa2xx_transceiver_mode(struct device *dev, int mode)
-{
-	if (mode & IR_OFF) {
-		pxa2xx_mfp_config(pxa2xx_mfp_off, ARRAY_SIZE(pxa2xx_mfp_off));
-	} else if (mode & IR_SIRMODE) {
-		pxa2xx_mfp_config(pxa2xx_mfp_sir, ARRAY_SIZE(pxa2xx_mfp_sir));
-	} else if (mode & IR_FIRMODE) {
-		pxa2xx_mfp_config(pxa2xx_mfp_fir, ARRAY_SIZE(pxa2xx_mfp_fir));
-	} else
-		BUG();
-}
-EXPORT_SYMBOL_GPL(pxa2xx_transceiver_mode);
-
 #define MDCNFG_DRAC2(mdcnfg)	(((mdcnfg) >> 21) & 0x3)
 #define MDCNFG_DRAC0(mdcnfg)	(((mdcnfg) >> 5) & 0x3)
 
diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c
deleted file mode 100644
index c29a7f0fa1b0..000000000000
--- a/arch/arm/mach-pxa/pxa3xx-ulpi.c
+++ /dev/null
@@ -1,385 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/pxa3xx-ulpi.c
- *
- * code specific to pxa3xx aka Monahans
- *
- * Copyright (C) 2010 CompuLab Ltd.
- *
- * 2010-13-07: Igor Grinberg <grinberg@compulab.co.il>
- *             initial version: pxa310 USB Host mode support
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/usb.h>
-#include <linux/usb/otg.h>
-#include <linux/soc/pxa/cpu.h>
-
-#include "regs-u2d.h"
-#include <linux/platform_data/usb-pxa3xx-ulpi.h>
-
-struct pxa3xx_u2d_ulpi {
-	struct clk		*clk;
-	void __iomem		*mmio_base;
-
-	struct usb_phy		*otg;
-	unsigned int		ulpi_mode;
-};
-
-static struct pxa3xx_u2d_ulpi *u2d;
-
-static inline u32 u2d_readl(u32 reg)
-{
-	return __raw_readl(u2d->mmio_base + reg);
-}
-
-static inline void u2d_writel(u32 reg, u32 val)
-{
-	__raw_writel(val, u2d->mmio_base + reg);
-}
-
-#if defined(CONFIG_PXA310_ULPI)
-enum u2d_ulpi_phy_mode {
-	SYNCH		= 0,
-	CARKIT		= (1 << 0),
-	SER_3PIN	= (1 << 1),
-	SER_6PIN	= (1 << 2),
-	LOWPOWER	= (1 << 3),
-};
-
-static inline enum u2d_ulpi_phy_mode pxa310_ulpi_get_phymode(void)
-{
-	return (u2d_readl(U2DOTGUSR) >> 28) & 0xF;
-}
-
-static int pxa310_ulpi_poll(void)
-{
-	int timeout = 50000;
-
-	while (timeout--) {
-		if (!(u2d_readl(U2DOTGUCR) & U2DOTGUCR_RUN))
-			return 0;
-
-		cpu_relax();
-	}
-
-	pr_warn("%s: ULPI access timed out!\n", __func__);
-
-	return -ETIMEDOUT;
-}
-
-static int pxa310_ulpi_read(struct usb_phy *otg, u32 reg)
-{
-	int err;
-
-	if (pxa310_ulpi_get_phymode() != SYNCH) {
-		pr_warn("%s: PHY is not in SYNCH mode!\n", __func__);
-		return -EBUSY;
-	}
-
-	u2d_writel(U2DOTGUCR, U2DOTGUCR_RUN | U2DOTGUCR_RNW | (reg << 16));
-	msleep(5);
-
-	err = pxa310_ulpi_poll();
-	if (err)
-		return err;
-
-	return u2d_readl(U2DOTGUCR) & U2DOTGUCR_RDATA;
-}
-
-static int pxa310_ulpi_write(struct usb_phy *otg, u32 val, u32 reg)
-{
-	if (pxa310_ulpi_get_phymode() != SYNCH) {
-		pr_warn("%s: PHY is not in SYNCH mode!\n", __func__);
-		return -EBUSY;
-	}
-
-	u2d_writel(U2DOTGUCR, U2DOTGUCR_RUN | (reg << 16) | (val << 8));
-	msleep(5);
-
-	return pxa310_ulpi_poll();
-}
-
-struct usb_phy_io_ops pxa310_ulpi_access_ops = {
-	.read	= pxa310_ulpi_read,
-	.write	= pxa310_ulpi_write,
-};
-
-static void pxa310_otg_transceiver_rtsm(void)
-{
-	u32 u2dotgcr;
-
-	/* put PHY to sync mode */
-	u2dotgcr = u2d_readl(U2DOTGCR);
-	u2dotgcr |=  U2DOTGCR_RTSM | U2DOTGCR_UTMID;
-	u2d_writel(U2DOTGCR, u2dotgcr);
-	msleep(10);
-
-	/* setup OTG sync mode */
-	u2dotgcr = u2d_readl(U2DOTGCR);
-	u2dotgcr |= U2DOTGCR_ULAF;
-	u2dotgcr &= ~(U2DOTGCR_SMAF | U2DOTGCR_CKAF);
-	u2d_writel(U2DOTGCR, u2dotgcr);
-}
-
-static int pxa310_start_otg_host_transcvr(struct usb_bus *host)
-{
-	int err;
-
-	pxa310_otg_transceiver_rtsm();
-
-	err = usb_phy_init(u2d->otg);
-	if (err) {
-		pr_err("OTG transceiver init failed");
-		return err;
-	}
-
-	err = otg_set_vbus(u2d->otg->otg, 1);
-	if (err) {
-		pr_err("OTG transceiver VBUS set failed");
-		return err;
-	}
-
-	err = otg_set_host(u2d->otg->otg, host);
-	if (err)
-		pr_err("OTG transceiver Host mode set failed");
-
-	return err;
-}
-
-static int pxa310_start_otg_hc(struct usb_bus *host)
-{
-	u32 u2dotgcr;
-	int err;
-
-	/* disable USB device controller */
-	u2d_writel(U2DCR, u2d_readl(U2DCR) & ~U2DCR_UDE);
-	u2d_writel(U2DOTGCR, u2d_readl(U2DOTGCR) | U2DOTGCR_UTMID);
-	u2d_writel(U2DOTGICR, u2d_readl(U2DOTGICR) & ~0x37F7F);
-
-	err = pxa310_start_otg_host_transcvr(host);
-	if (err)
-		return err;
-
-	/* set xceiver mode */
-	if (u2d->ulpi_mode & ULPI_IC_6PIN_SERIAL)
-		u2d_writel(U2DP3CR, u2d_readl(U2DP3CR) & ~U2DP3CR_P2SS);
-	else if (u2d->ulpi_mode & ULPI_IC_3PIN_SERIAL)
-		u2d_writel(U2DP3CR, u2d_readl(U2DP3CR) | U2DP3CR_P2SS);
-
-	/* start OTG host controller */
-	u2dotgcr = u2d_readl(U2DOTGCR) | U2DOTGCR_SMAF;
-	u2d_writel(U2DOTGCR, u2dotgcr & ~(U2DOTGCR_ULAF | U2DOTGCR_CKAF));
-
-	return 0;
-}
-
-static void pxa310_stop_otg_hc(void)
-{
-	pxa310_otg_transceiver_rtsm();
-
-	otg_set_host(u2d->otg->otg, NULL);
-	otg_set_vbus(u2d->otg->otg, 0);
-	usb_phy_shutdown(u2d->otg);
-}
-
-static void pxa310_u2d_setup_otg_hc(void)
-{
-	u32 u2dotgcr;
-
-	u2dotgcr = u2d_readl(U2DOTGCR);
-	u2dotgcr |= U2DOTGCR_ULAF | U2DOTGCR_UTMID;
-	u2dotgcr &= ~(U2DOTGCR_SMAF | U2DOTGCR_CKAF);
-	u2d_writel(U2DOTGCR, u2dotgcr);
-	msleep(5);
-	u2d_writel(U2DOTGCR, u2dotgcr | U2DOTGCR_ULE);
-	msleep(5);
-	u2d_writel(U2DOTGICR, u2d_readl(U2DOTGICR) & ~0x37F7F);
-}
-
-static int pxa310_otg_init(struct pxa3xx_u2d_platform_data *pdata)
-{
-	unsigned int ulpi_mode = ULPI_OTG_DRVVBUS;
-
-	if (pdata) {
-		if (pdata->ulpi_mode & ULPI_SER_6PIN)
-			ulpi_mode |= ULPI_IC_6PIN_SERIAL;
-		else if (pdata->ulpi_mode & ULPI_SER_3PIN)
-			ulpi_mode |= ULPI_IC_3PIN_SERIAL;
-	}
-
-	u2d->ulpi_mode = ulpi_mode;
-
-	u2d->otg = otg_ulpi_create(&pxa310_ulpi_access_ops, ulpi_mode);
-	if (!u2d->otg)
-		return -ENOMEM;
-
-	u2d->otg->io_priv = u2d->mmio_base;
-
-	return 0;
-}
-
-static void pxa310_otg_exit(void)
-{
-	kfree(u2d->otg);
-}
-#else
-static inline void pxa310_u2d_setup_otg_hc(void) {}
-static inline int pxa310_start_otg_hc(struct usb_bus *host)
-{
-	return 0;
-}
-static inline void pxa310_stop_otg_hc(void) {}
-static inline int pxa310_otg_init(struct pxa3xx_u2d_platform_data *pdata)
-{
-	return 0;
-}
-static inline void pxa310_otg_exit(void) {}
-#endif /* CONFIG_PXA310_ULPI */
-
-int pxa3xx_u2d_start_hc(struct usb_bus *host)
-{
-	int err = 0;
-
-	/* In case the PXA3xx ULPI isn't used, do nothing. */
-	if (!u2d)
-		return 0;
-
-	clk_prepare_enable(u2d->clk);
-
-	if (cpu_is_pxa310()) {
-		pxa310_u2d_setup_otg_hc();
-		err = pxa310_start_otg_hc(host);
-	}
-
-	return err;
-}
-EXPORT_SYMBOL_GPL(pxa3xx_u2d_start_hc);
-
-void pxa3xx_u2d_stop_hc(struct usb_bus *host)
-{
-	/* In case the PXA3xx ULPI isn't used, do nothing. */
-	if (!u2d)
-		return;
-
-	if (cpu_is_pxa310())
-		pxa310_stop_otg_hc();
-
-	clk_disable_unprepare(u2d->clk);
-}
-EXPORT_SYMBOL_GPL(pxa3xx_u2d_stop_hc);
-
-static int pxa3xx_u2d_probe(struct platform_device *pdev)
-{
-	struct pxa3xx_u2d_platform_data *pdata = pdev->dev.platform_data;
-	struct resource *r;
-	int err;
-
-	u2d = kzalloc(sizeof(*u2d), GFP_KERNEL);
-	if (!u2d)
-		return -ENOMEM;
-
-	u2d->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(u2d->clk)) {
-		dev_err(&pdev->dev, "failed to get u2d clock\n");
-		err = PTR_ERR(u2d->clk);
-		goto err_free_mem;
-	}
-
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!r) {
-		dev_err(&pdev->dev, "no IO memory resource defined\n");
-		err = -ENODEV;
-		goto err_put_clk;
-	}
-
-        r = request_mem_region(r->start, resource_size(r), pdev->name);
-        if (!r) {
-                dev_err(&pdev->dev, "failed to request memory resource\n");
-                err = -EBUSY;
-                goto err_put_clk;
-        }
-
-	u2d->mmio_base = ioremap(r->start, resource_size(r));
-	if (!u2d->mmio_base) {
-		dev_err(&pdev->dev, "ioremap() failed\n");
-		err = -ENODEV;
-		goto err_free_res;
-	}
-
-	if (pdata->init) {
-		err = pdata->init(&pdev->dev);
-		if (err)
-			goto err_free_io;
-	}
-
-	/* Only PXA310 U2D has OTG functionality */
-	if (cpu_is_pxa310()) {
-		err = pxa310_otg_init(pdata);
-		if (err)
-			goto err_free_plat;
-	}
-
-	platform_set_drvdata(pdev, u2d);
-
-	return 0;
-
-err_free_plat:
-	if (pdata->exit)
-		pdata->exit(&pdev->dev);
-err_free_io:
-	iounmap(u2d->mmio_base);
-err_free_res:
-	release_mem_region(r->start, resource_size(r));
-err_put_clk:
-	clk_put(u2d->clk);
-err_free_mem:
-	kfree(u2d);
-	return err;
-}
-
-static int pxa3xx_u2d_remove(struct platform_device *pdev)
-{
-	struct pxa3xx_u2d_platform_data *pdata = pdev->dev.platform_data;
-	struct resource *r;
-
-	if (cpu_is_pxa310()) {
-		pxa310_stop_otg_hc();
-		pxa310_otg_exit();
-	}
-
-	if (pdata->exit)
-		pdata->exit(&pdev->dev);
-
-	platform_set_drvdata(pdev, NULL);
-	iounmap(u2d->mmio_base);
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(r->start, resource_size(r));
-
-	clk_put(u2d->clk);
-
-	kfree(u2d);
-
-	return 0;
-}
-
-static struct platform_driver pxa3xx_u2d_ulpi_driver = {
-        .driver		= {
-                .name   = "pxa3xx-u2d",
-        },
-        .probe          = pxa3xx_u2d_probe,
-        .remove         = pxa3xx_u2d_remove,
-};
-module_platform_driver(pxa3xx_u2d_ulpi_driver);
-
-MODULE_DESCRIPTION("PXA3xx U2D ULPI driver");
-MODULE_AUTHOR("Igor Grinberg");
-MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index b26f00fc75d5..1d1e5713464d 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -363,13 +363,6 @@ static void __init __pxa3xx_init_irq(void)
 	pxa_init_ext_wakeup_irq(pxa3xx_set_wake);
 }
 
-void __init pxa3xx_init_irq(void)
-{
-	__pxa3xx_init_irq();
-	pxa_init_irq(56, pxa3xx_set_wake);
-}
-
-#ifdef CONFIG_OF
 static int __init __init
 pxa3xx_dt_init_irq(struct device_node *node, struct device_node *parent)
 {
@@ -380,7 +373,6 @@ pxa3xx_dt_init_irq(struct device_node *node, struct device_node *parent)
 	return 0;
 }
 IRQCHIP_DECLARE(pxa3xx_intc, "marvell,pxa-intc", pxa3xx_dt_init_irq);
-#endif	/* CONFIG_OF */
 
 static struct map_desc pxa3xx_io_desc[] __initdata = {
 	{	/* Mem Ctl */
@@ -403,73 +395,6 @@ void __init pxa3xx_map_io(void)
 	pxa3xx_get_clk_frequency_khz(1);
 }
 
-/*
- * device registration specific to PXA3xx.
- */
-
-void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
-{
-	pxa_register_device(&pxa3xx_device_i2c_power, info);
-}
-
-static struct pxa_gpio_platform_data pxa3xx_gpio_pdata = {
-	.irq_base	= PXA_GPIO_TO_IRQ(0),
-};
-
-static struct platform_device *devices[] __initdata = {
-	&pxa27x_device_udc,
-	&pxa_device_pmu,
-	&pxa_device_i2s,
-	&pxa_device_asoc_ssp1,
-	&pxa_device_asoc_ssp2,
-	&pxa_device_asoc_ssp3,
-	&pxa_device_asoc_ssp4,
-	&pxa_device_asoc_platform,
-	&pxa_device_rtc,
-	&pxa3xx_device_ssp1,
-	&pxa3xx_device_ssp2,
-	&pxa3xx_device_ssp3,
-	&pxa3xx_device_ssp4,
-	&pxa27x_device_pwm0,
-	&pxa27x_device_pwm1,
-};
-
-static const struct dma_slave_map pxa3xx_slave_map[] = {
-	/* PXA25x, PXA27x and PXA3xx common entries */
-	{ "pxa2xx-ac97", "pcm_pcm_mic_mono", PDMA_FILTER_PARAM(LOWEST, 8) },
-	{ "pxa2xx-ac97", "pcm_pcm_aux_mono_in", PDMA_FILTER_PARAM(LOWEST, 9) },
-	{ "pxa2xx-ac97", "pcm_pcm_aux_mono_out",
-	  PDMA_FILTER_PARAM(LOWEST, 10) },
-	{ "pxa2xx-ac97", "pcm_pcm_stereo_in", PDMA_FILTER_PARAM(LOWEST, 11) },
-	{ "pxa2xx-ac97", "pcm_pcm_stereo_out", PDMA_FILTER_PARAM(LOWEST, 12) },
-	{ "pxa-ssp-dai.0", "rx", PDMA_FILTER_PARAM(LOWEST, 13) },
-	{ "pxa-ssp-dai.0", "tx", PDMA_FILTER_PARAM(LOWEST, 14) },
-	{ "pxa-ssp-dai.1", "rx", PDMA_FILTER_PARAM(LOWEST, 15) },
-	{ "pxa-ssp-dai.1", "tx", PDMA_FILTER_PARAM(LOWEST, 16) },
-	{ "pxa2xx-ir", "rx", PDMA_FILTER_PARAM(LOWEST, 17) },
-	{ "pxa2xx-ir", "tx", PDMA_FILTER_PARAM(LOWEST, 18) },
-	{ "pxa2xx-mci.0", "rx", PDMA_FILTER_PARAM(LOWEST, 21) },
-	{ "pxa2xx-mci.0", "tx", PDMA_FILTER_PARAM(LOWEST, 22) },
-	{ "pxa-ssp-dai.2", "rx", PDMA_FILTER_PARAM(LOWEST, 66) },
-	{ "pxa-ssp-dai.2", "tx", PDMA_FILTER_PARAM(LOWEST, 67) },
-
-	/* PXA3xx specific map */
-	{ "pxa-ssp-dai.3", "rx", PDMA_FILTER_PARAM(LOWEST, 2) },
-	{ "pxa-ssp-dai.3", "tx", PDMA_FILTER_PARAM(LOWEST, 3) },
-	{ "pxa2xx-mci.1", "rx", PDMA_FILTER_PARAM(LOWEST, 93) },
-	{ "pxa2xx-mci.1", "tx", PDMA_FILTER_PARAM(LOWEST, 94) },
-	{ "pxa3xx-nand", "data", PDMA_FILTER_PARAM(LOWEST, 97) },
-	{ "pxa2xx-mci.2", "rx", PDMA_FILTER_PARAM(LOWEST, 100) },
-	{ "pxa2xx-mci.2", "tx", PDMA_FILTER_PARAM(LOWEST, 101) },
-};
-
-static struct mmp_dma_platdata pxa3xx_dma_pdata = {
-	.dma_channels	= 32,
-	.nb_requestors	= 100,
-	.slave_map	= pxa3xx_slave_map,
-	.slave_map_cnt	= ARRAY_SIZE(pxa3xx_slave_map),
-};
-
 static int __init pxa3xx_init(void)
 {
 	int ret = 0;
@@ -501,20 +426,6 @@ static int __init pxa3xx_init(void)
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa3xx_mfp_syscore_ops);
-
-		if (of_have_populated_dt())
-			return 0;
-
-		pxa2xx_set_dmac_info(&pxa3xx_dma_pdata);
-		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
-		if (ret)
-			return ret;
-		if (cpu_is_pxa300() || cpu_is_pxa310() || cpu_is_pxa320()) {
-			platform_device_add_data(&pxa3xx_device_gpio,
-						 &pxa3xx_gpio_pdata,
-						 sizeof(pxa3xx_gpio_pdata));
-			ret = platform_device_register(&pxa3xx_device_gpio);
-		}
 	}
 
 	return ret;
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
deleted file mode 100644
index b9021a40cbd1..000000000000
--- a/arch/arm/mach-pxa/pxa930.c
+++ /dev/null
@@ -1,217 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/pxa930.c
- *
- * Code specific to PXA930
- *
- * Copyright (C) 2007-2008 Marvell Internation Ltd.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/dma-mapping.h>
-#include <linux/irq.h>
-#include <linux/gpio-pxa.h>
-#include <linux/platform_device.h>
-#include <linux/soc/pxa/cpu.h>
-
-#include "pxa930.h"
-
-#include "devices.h"
-
-static struct mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
-
-	MFP_ADDR(GPIO0, 0x02e0),
-	MFP_ADDR(GPIO1, 0x02dc),
-	MFP_ADDR(GPIO2, 0x02e8),
-	MFP_ADDR(GPIO3, 0x02d8),
-	MFP_ADDR(GPIO4, 0x02e4),
-	MFP_ADDR(GPIO5, 0x02ec),
-	MFP_ADDR(GPIO6, 0x02f8),
-	MFP_ADDR(GPIO7, 0x02fc),
-	MFP_ADDR(GPIO8, 0x0300),
-	MFP_ADDR(GPIO9, 0x02d4),
-	MFP_ADDR(GPIO10, 0x02f4),
-	MFP_ADDR(GPIO11, 0x02f0),
-	MFP_ADDR(GPIO12, 0x0304),
-	MFP_ADDR(GPIO13, 0x0310),
-	MFP_ADDR(GPIO14, 0x0308),
-	MFP_ADDR(GPIO15, 0x030c),
-	MFP_ADDR(GPIO16, 0x04e8),
-	MFP_ADDR(GPIO17, 0x04f4),
-	MFP_ADDR(GPIO18, 0x04f8),
-	MFP_ADDR(GPIO19, 0x04fc),
-	MFP_ADDR(GPIO20, 0x0518),
-	MFP_ADDR(GPIO21, 0x051c),
-	MFP_ADDR(GPIO22, 0x04ec),
-	MFP_ADDR(GPIO23, 0x0500),
-	MFP_ADDR(GPIO24, 0x04f0),
-	MFP_ADDR(GPIO25, 0x0504),
-	MFP_ADDR(GPIO26, 0x0510),
-	MFP_ADDR(GPIO27, 0x0514),
-	MFP_ADDR(GPIO28, 0x0520),
-	MFP_ADDR(GPIO29, 0x0600),
-	MFP_ADDR(GPIO30, 0x0618),
-	MFP_ADDR(GPIO31, 0x0610),
-	MFP_ADDR(GPIO32, 0x060c),
-	MFP_ADDR(GPIO33, 0x061c),
-	MFP_ADDR(GPIO34, 0x0620),
-	MFP_ADDR(GPIO35, 0x0628),
-	MFP_ADDR(GPIO36, 0x062c),
-	MFP_ADDR(GPIO37, 0x0630),
-	MFP_ADDR(GPIO38, 0x0634),
-	MFP_ADDR(GPIO39, 0x0638),
-	MFP_ADDR(GPIO40, 0x063c),
-	MFP_ADDR(GPIO41, 0x0614),
-	MFP_ADDR(GPIO42, 0x0624),
-	MFP_ADDR(GPIO43, 0x0608),
-	MFP_ADDR(GPIO44, 0x0604),
-	MFP_ADDR(GPIO45, 0x050c),
-	MFP_ADDR(GPIO46, 0x0508),
-	MFP_ADDR(GPIO47, 0x02bc),
-	MFP_ADDR(GPIO48, 0x02b4),
-	MFP_ADDR(GPIO49, 0x02b8),
-	MFP_ADDR(GPIO50, 0x02c8),
-	MFP_ADDR(GPIO51, 0x02c0),
-	MFP_ADDR(GPIO52, 0x02c4),
-	MFP_ADDR(GPIO53, 0x02d0),
-	MFP_ADDR(GPIO54, 0x02cc),
-	MFP_ADDR(GPIO55, 0x029c),
-	MFP_ADDR(GPIO56, 0x02a0),
-	MFP_ADDR(GPIO57, 0x0294),
-	MFP_ADDR(GPIO58, 0x0298),
-	MFP_ADDR(GPIO59, 0x02a4),
-	MFP_ADDR(GPIO60, 0x02a8),
-	MFP_ADDR(GPIO61, 0x02b0),
-	MFP_ADDR(GPIO62, 0x02ac),
-	MFP_ADDR(GPIO63, 0x0640),
-	MFP_ADDR(GPIO64, 0x065c),
-	MFP_ADDR(GPIO65, 0x0648),
-	MFP_ADDR(GPIO66, 0x0644),
-	MFP_ADDR(GPIO67, 0x0674),
-	MFP_ADDR(GPIO68, 0x0658),
-	MFP_ADDR(GPIO69, 0x0654),
-	MFP_ADDR(GPIO70, 0x0660),
-	MFP_ADDR(GPIO71, 0x0668),
-	MFP_ADDR(GPIO72, 0x0664),
-	MFP_ADDR(GPIO73, 0x0650),
-	MFP_ADDR(GPIO74, 0x066c),
-	MFP_ADDR(GPIO75, 0x064c),
-	MFP_ADDR(GPIO76, 0x0670),
-	MFP_ADDR(GPIO77, 0x0678),
-	MFP_ADDR(GPIO78, 0x067c),
-	MFP_ADDR(GPIO79, 0x0694),
-	MFP_ADDR(GPIO80, 0x069c),
-	MFP_ADDR(GPIO81, 0x06a0),
-	MFP_ADDR(GPIO82, 0x06a4),
-	MFP_ADDR(GPIO83, 0x0698),
-	MFP_ADDR(GPIO84, 0x06bc),
-	MFP_ADDR(GPIO85, 0x06b4),
-	MFP_ADDR(GPIO86, 0x06b0),
-	MFP_ADDR(GPIO87, 0x06c0),
-	MFP_ADDR(GPIO88, 0x06c4),
-	MFP_ADDR(GPIO89, 0x06ac),
-	MFP_ADDR(GPIO90, 0x0680),
-	MFP_ADDR(GPIO91, 0x0684),
-	MFP_ADDR(GPIO92, 0x0688),
-	MFP_ADDR(GPIO93, 0x0690),
-	MFP_ADDR(GPIO94, 0x068c),
-	MFP_ADDR(GPIO95, 0x06a8),
-	MFP_ADDR(GPIO96, 0x06b8),
-	MFP_ADDR(GPIO97, 0x0410),
-	MFP_ADDR(GPIO98, 0x0418),
-	MFP_ADDR(GPIO99, 0x041c),
-	MFP_ADDR(GPIO100, 0x0414),
-	MFP_ADDR(GPIO101, 0x0408),
-	MFP_ADDR(GPIO102, 0x0324),
-	MFP_ADDR(GPIO103, 0x040c),
-	MFP_ADDR(GPIO104, 0x0400),
-	MFP_ADDR(GPIO105, 0x0328),
-	MFP_ADDR(GPIO106, 0x0404),
-
-	MFP_ADDR(nXCVREN, 0x0204),
-	MFP_ADDR(DF_CLE_nOE, 0x020c),
-	MFP_ADDR(DF_nADV1_ALE, 0x0218),
-	MFP_ADDR(DF_SCLK_E, 0x0214),
-	MFP_ADDR(DF_SCLK_S, 0x0210),
-	MFP_ADDR(nBE0, 0x021c),
-	MFP_ADDR(nBE1, 0x0220),
-	MFP_ADDR(DF_nADV2_ALE, 0x0224),
-	MFP_ADDR(DF_INT_RnB, 0x0228),
-	MFP_ADDR(DF_nCS0, 0x022c),
-	MFP_ADDR(DF_nCS1, 0x0230),
-	MFP_ADDR(nLUA, 0x0254),
-	MFP_ADDR(nLLA, 0x0258),
-	MFP_ADDR(DF_nWE, 0x0234),
-	MFP_ADDR(DF_nRE_nOE, 0x0238),
-	MFP_ADDR(DF_ADDR0, 0x024c),
-	MFP_ADDR(DF_ADDR1, 0x0250),
-	MFP_ADDR(DF_ADDR2, 0x025c),
-	MFP_ADDR(DF_ADDR3, 0x0260),
-	MFP_ADDR(DF_IO0, 0x023c),
-	MFP_ADDR(DF_IO1, 0x0240),
-	MFP_ADDR(DF_IO2, 0x0244),
-	MFP_ADDR(DF_IO3, 0x0248),
-	MFP_ADDR(DF_IO4, 0x0264),
-	MFP_ADDR(DF_IO5, 0x0268),
-	MFP_ADDR(DF_IO6, 0x026c),
-	MFP_ADDR(DF_IO7, 0x0270),
-	MFP_ADDR(DF_IO8, 0x0274),
-	MFP_ADDR(DF_IO9, 0x0278),
-	MFP_ADDR(DF_IO10, 0x027c),
-	MFP_ADDR(DF_IO11, 0x0280),
-	MFP_ADDR(DF_IO12, 0x0284),
-	MFP_ADDR(DF_IO13, 0x0288),
-	MFP_ADDR(DF_IO14, 0x028c),
-	MFP_ADDR(DF_IO15, 0x0290),
-
-	MFP_ADDR(GSIM_UIO, 0x0314),
-	MFP_ADDR(GSIM_UCLK, 0x0318),
-	MFP_ADDR(GSIM_UDET, 0x031c),
-	MFP_ADDR(GSIM_nURST, 0x0320),
-
-	MFP_ADDR(PMIC_INT, 0x06c8),
-
-	MFP_ADDR(RDY, 0x0200),
-
-	MFP_ADDR_END,
-};
-
-static struct mfp_addr_map pxa935_mfp_addr_map[] __initdata = {
-	MFP_ADDR(GPIO159, 0x0524),
-	MFP_ADDR(GPIO163, 0x0534),
-	MFP_ADDR(GPIO167, 0x0544),
-	MFP_ADDR(GPIO168, 0x0548),
-	MFP_ADDR(GPIO169, 0x054c),
-	MFP_ADDR(GPIO170, 0x0550),
-	MFP_ADDR(GPIO171, 0x0554),
-	MFP_ADDR(GPIO172, 0x0558),
-	MFP_ADDR(GPIO173, 0x055c),
-
-	MFP_ADDR_END,
-};
-
-static struct pxa_gpio_platform_data pxa93x_gpio_pdata = {
-	.irq_base	= PXA_GPIO_TO_IRQ(0),
-};
-
-static int __init pxa930_init(void)
-{
-	int ret = 0;
-
-	if (cpu_is_pxa93x()) {
-		mfp_init_base(io_p2v(MFPR_BASE));
-		mfp_init_addr(pxa930_mfp_addr_map);
-		platform_device_add_data(&pxa93x_device_gpio,
-					 &pxa93x_gpio_pdata,
-					 sizeof(pxa93x_gpio_pdata));
-		ret = platform_device_register(&pxa93x_device_gpio);
-	}
-
-	if (cpu_is_pxa935())
-		mfp_init_addr(pxa935_mfp_addr_map);
-
-	return 0;
-}
-
-core_initcall(pxa930_init);
diff --git a/arch/arm/mach-pxa/pxa930.h b/arch/arm/mach-pxa/pxa930.h
deleted file mode 100644
index bbf25c044641..000000000000
--- a/arch/arm/mach-pxa/pxa930.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MACH_PXA930_H
-#define __MACH_PXA930_H
-
-#include "pxa3xx.h"
-#include "mfp-pxa930.h"
-
-#endif /* __MACH_PXA930_H */
diff --git a/arch/arm/mach-pxa/pxa_cplds_irqs.c b/arch/arm/mach-pxa/pxa_cplds_irqs.c
deleted file mode 100644
index eda5a47d7fbb..000000000000
--- a/arch/arm/mach-pxa/pxa_cplds_irqs.c
+++ /dev/null
@@ -1,200 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Intel Reference Systems cplds
- *
- * Copyright (C) 2014 Robert Jarzmik
- *
- * Cplds motherboard driver, supporting lubbock and mainstone SoC board.
- */
-
-#include <linux/bitops.h>
-#include <linux/gpio.h>
-#include <linux/gpio/consumer.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/mfd/core.h>
-#include <linux/module.h>
-#include <linux/of_platform.h>
-
-#define FPGA_IRQ_MASK_EN 0x0
-#define FPGA_IRQ_SET_CLR 0x10
-
-#define CPLDS_NB_IRQ	32
-
-struct cplds {
-	void __iomem *base;
-	int irq;
-	unsigned int irq_mask;
-	struct gpio_desc *gpio0;
-	struct irq_domain *irqdomain;
-};
-
-static irqreturn_t cplds_irq_handler(int in_irq, void *d)
-{
-	struct cplds *fpga = d;
-	unsigned long pending;
-	unsigned int bit;
-
-	do {
-		pending = readl(fpga->base + FPGA_IRQ_SET_CLR) & fpga->irq_mask;
-		for_each_set_bit(bit, &pending, CPLDS_NB_IRQ)
-			generic_handle_domain_irq(fpga->irqdomain, bit);
-	} while (pending);
-
-	return IRQ_HANDLED;
-}
-
-static void cplds_irq_mask(struct irq_data *d)
-{
-	struct cplds *fpga = irq_data_get_irq_chip_data(d);
-	unsigned int cplds_irq = irqd_to_hwirq(d);
-	unsigned int bit = BIT(cplds_irq);
-
-	fpga->irq_mask &= ~bit;
-	writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
-}
-
-static void cplds_irq_unmask(struct irq_data *d)
-{
-	struct cplds *fpga = irq_data_get_irq_chip_data(d);
-	unsigned int cplds_irq = irqd_to_hwirq(d);
-	unsigned int set, bit = BIT(cplds_irq);
-
-	set = readl(fpga->base + FPGA_IRQ_SET_CLR);
-	writel(set & ~bit, fpga->base + FPGA_IRQ_SET_CLR);
-
-	fpga->irq_mask |= bit;
-	writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
-}
-
-static struct irq_chip cplds_irq_chip = {
-	.name		= "pxa_cplds",
-	.irq_ack	= cplds_irq_mask,
-	.irq_mask	= cplds_irq_mask,
-	.irq_unmask	= cplds_irq_unmask,
-	.flags		= IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE,
-};
-
-static int cplds_irq_domain_map(struct irq_domain *d, unsigned int irq,
-				   irq_hw_number_t hwirq)
-{
-	struct cplds *fpga = d->host_data;
-
-	irq_set_chip_and_handler(irq, &cplds_irq_chip, handle_level_irq);
-	irq_set_chip_data(irq, fpga);
-
-	return 0;
-}
-
-static const struct irq_domain_ops cplds_irq_domain_ops = {
-	.xlate = irq_domain_xlate_twocell,
-	.map = cplds_irq_domain_map,
-};
-
-static int cplds_resume(struct platform_device *pdev)
-{
-	struct cplds *fpga = platform_get_drvdata(pdev);
-
-	writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
-
-	return 0;
-}
-
-static int cplds_probe(struct platform_device *pdev)
-{
-	struct resource *res;
-	struct cplds *fpga;
-	int ret;
-	int base_irq;
-	unsigned long irqflags = 0;
-
-	fpga = devm_kzalloc(&pdev->dev, sizeof(*fpga), GFP_KERNEL);
-	if (!fpga)
-		return -ENOMEM;
-
-	fpga->irq = platform_get_irq(pdev, 0);
-	if (fpga->irq <= 0)
-		return fpga->irq;
-
-	base_irq = platform_get_irq(pdev, 1);
-	if (base_irq < 0) {
-		base_irq = 0;
-	} else {
-		ret = devm_irq_alloc_descs(&pdev->dev, base_irq, base_irq, CPLDS_NB_IRQ, 0);
-		if (ret < 0)
-			return ret;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	fpga->base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(fpga->base))
-		return PTR_ERR(fpga->base);
-
-	platform_set_drvdata(pdev, fpga);
-
-	writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
-	writel(0, fpga->base + FPGA_IRQ_SET_CLR);
-
-	irqflags = irq_get_trigger_type(fpga->irq);
-	ret = devm_request_irq(&pdev->dev, fpga->irq, cplds_irq_handler,
-			       irqflags, dev_name(&pdev->dev), fpga);
-	if (ret == -ENOSYS)
-		return -EPROBE_DEFER;
-
-	if (ret) {
-		dev_err(&pdev->dev, "couldn't request main irq%d: %d\n",
-			fpga->irq, ret);
-		return ret;
-	}
-
-	irq_set_irq_wake(fpga->irq, 1);
-	if (base_irq)
-		fpga->irqdomain = irq_domain_add_legacy(pdev->dev.of_node,
-							CPLDS_NB_IRQ,
-							base_irq, 0,
-							&cplds_irq_domain_ops,
-							fpga);
-	else
-		fpga->irqdomain = irq_domain_add_linear(pdev->dev.of_node,
-							CPLDS_NB_IRQ,
-							&cplds_irq_domain_ops,
-							fpga);
-	if (!fpga->irqdomain)
-		return -ENODEV;
-
-	return 0;
-}
-
-static int cplds_remove(struct platform_device *pdev)
-{
-	struct cplds *fpga = platform_get_drvdata(pdev);
-
-	irq_set_chip_and_handler(fpga->irq, NULL, NULL);
-
-	return 0;
-}
-
-static const struct of_device_id cplds_id_table[] = {
-	{ .compatible = "intel,lubbock-cplds-irqs", },
-	{ .compatible = "intel,mainstone-cplds-irqs", },
-	{ }
-};
-MODULE_DEVICE_TABLE(of, cplds_id_table);
-
-static struct platform_driver cplds_driver = {
-	.driver		= {
-		.name	= "pxa_cplds_irqs",
-		.of_match_table = of_match_ptr(cplds_id_table),
-	},
-	.probe		= cplds_probe,
-	.remove		= cplds_remove,
-	.resume		= cplds_resume,
-};
-
-module_platform_driver(cplds_driver);
-
-MODULE_DESCRIPTION("PXA Cplds interrupts driver");
-MODULE_AUTHOR("Robert Jarzmik <robert.jarzmik@free.fr>");
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/regs-u2d.h b/arch/arm/mach-pxa/regs-u2d.h
deleted file mode 100644
index ab517ba62c9a..000000000000
--- a/arch/arm/mach-pxa/regs-u2d.h
+++ /dev/null
@@ -1,199 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_ARCH_PXA3xx_U2D_H
-#define __ASM_ARCH_PXA3xx_U2D_H
-
-/*
- * USB2 device controller registers and bits definitions
- */
-#define U2DCR		(0x0000)	/* U2D Control Register */
-#define U2DCR_NDC	(1   << 31)	/* NAK During Config */
-#define U2DCR_HSTC	(0x7 << 28)	/* High Speed Timeout Calibration */
-#define U2DCR_SPEOREN	(1   << 27)	/* Short Packet EOR INTR generation Enable */
-#define U2DCR_FSTC	(0x7 << 24)	/* Full Speed Timeout Calibration */
-#define U2DCR_UCLKOVR	(1   << 22)	/* UTM Clock Override */
-#define U2DCR_ABP	(1   << 21)	/* Application Bus Power */
-#define U2DCR_ADD	(1   << 20)	/* Application Device Disconnect */
-#define U2DCR_CC	(1   << 19)	/* Configuration Change */
-#define U2DCR_HS	(1   << 18)	/* High Speed USB Detection */
-#define U2DCR_SMAC	(1   << 17)	/* Switch Endpoint Memory to Active Configuration */
-#define U2DCR_DWRE	(1   << 16)	/* Device Remote Wake-up Feature */
-#define U2DCR_ACN	(0xf << 12)	/* Active U2D Configuration Number */
-#define U2DCR_AIN	(0xf << 8)	/* Active U2D Interface Number */
-#define U2DCR_AAISN	(0xf << 4)	/* Active U2D Alternate Interface Setting Number */
-#define U2DCR_EMCE	(1   << 3)	/* Endpoint Memory Configuration Error */
-#define U2DCR_UDR	(1   << 2)	/* U2D Resume */
-#define U2DCR_UDA	(1   << 1)	/* U2D Active */
-#define U2DCR_UDE	(1   << 0)	/* U2D Enable */
-
-#define U2DICR			(0x0004)	/* U2D Interrupt Control Register */
-#define U2DISR			(0x000C)	/* U2D Interrupt Status Register */
-#define U2DINT_CC		(1 << 31)	/* Interrupt - Configuration Change */
-#define U2DINT_SOF		(1 << 30)	/* Interrupt - SOF */
-#define U2DINT_USOF		(1 << 29)	/* Interrupt - micro SOF */
-#define U2DINT_RU		(1 << 28)	/* Interrupt - Resume */
-#define U2DINT_SU		(1 << 27)	/* Interrupt - Suspend */
-#define U2DINT_RS		(1 << 26)	/* Interrupt - Reset */
-#define U2DINT_DPE		(1 << 25)	/* Interrupt - Data Packet Error */
-#define U2DINT_FIFOERR		(0x4)		/* Interrupt - endpoint FIFO error */
-#define U2DINT_PACKETCMP	(0x2)		/* Interrupt - endpoint packet complete */
-#define U2DINT_SPACKETCMP	(0x1)		/* Interrupt - endpoint short packet complete */
-
-#define U2DFNR			(0x0014)	/* U2D Frame Number Register */
-
-#define U2DINT(n, intr)		(((intr) & 0x07) << (((n) & 0x07) * 3))
-#define U2DICR2			(0x0008)	/* U2D Interrupt Control Register 2 */
-#define U2DISR2			(0x0010)	/* U2D Interrupt Status Register 2 */
-
-#define U2DOTGCR		(0x0020)	/* U2D OTG Control Register */
-#define U2DOTGCR_OTGEN		(1 << 31)	/* On-The-Go Enable */
-#define U2DOTGCR_AALTHNP	(1 << 30)	/* A-device Alternate Host Negotiation Protocal Port Support */
-#define U2DOTGCR_AHNP		(1 << 29)	/* A-device Host Negotiation Protocal Support */
-#define U2DOTGCR_BHNP		(1 << 28)	/* B-device Host Negotiation Protocal Enable */
-
-#ifdef CONFIG_CPU_PXA930
-#define U2DOTGCR_LPA		(1 << 15)	/* ULPI low power mode active */
-#define U2DOTGCR_IESI		(1 << 13)	/* OTG interrupt Enable */
-#define U2DOTGCR_ISSI		(1 << 12)	/* OTG interrupt status */
-#endif
-
-#define U2DOTGCR_CKAF	(1 << 5)	/* Carkit Mode Alternate Function Select */
-#define U2DOTGCR_UTMID	(1 << 4)	/* UTMI Interface Disable */
-#define U2DOTGCR_ULAF	(1 << 3)	/* ULPI Mode Alternate Function Select */
-#define U2DOTGCR_SMAF	(1 << 2)	/* Serial Mode Alternate Function Select */
-#define U2DOTGCR_RTSM	(1 << 1)	/* Return to Synchronous Mode (ULPI Mode) */
-#define U2DOTGCR_ULE	(1 << 0)	/* ULPI Wrapper Enable */
-
-#define U2DOTGICR	(0x0024)	/* U2D OTG Interrupt Control Register */
-#define U2DOTGISR	(0x0028)	/* U2D OTG Interrupt Status Register */
-
-#define U2DOTGINT_SF	(1 << 17)	/* OTG Set Feature Command Received */
-#define U2DOTGINT_SI	(1 << 16)	/* OTG Interrupt */
-#define U2DOTGINT_RLS1	(1 << 14)	/* RXCMD Linestate[1] Change Interrupt Rise */
-#define U2DOTGINT_RLS0	(1 << 13)	/* RXCMD Linestate[0] Change Interrupt Rise */
-#define U2DOTGINT_RID	(1 << 12)	/* RXCMD OTG ID Change Interrupt Rise */
-#define U2DOTGINT_RSE	(1 << 11)	/* RXCMD OTG Session End Interrupt Rise */
-#define U2DOTGINT_RSV	(1 << 10)	/* RXCMD OTG Session Valid Interrupt Rise */
-#define U2DOTGINT_RVV	(1 << 9)	/* RXCMD OTG Vbus Valid Interrupt Rise */
-#define U2DOTGINT_RCK	(1 << 8)	/* RXCMD Carkit Interrupt Rise */
-#define U2DOTGINT_FLS1	(1 << 6)	/* RXCMD Linestate[1] Change Interrupt Fall */
-#define U2DOTGINT_FLS0	(1 << 5)	/* RXCMD Linestate[0] Change Interrupt Fall */
-#define U2DOTGINT_FID	(1 << 4)	/* RXCMD OTG ID Change Interrupt Fall */
-#define U2DOTGINT_FSE	(1 << 3)	/* RXCMD OTG Session End Interrupt Fall */
-#define U2DOTGINT_FSV	(1 << 2)	/* RXCMD OTG Session Valid Interrupt Fall */
-#define U2DOTGINT_FVV	(1 << 1)	/* RXCMD OTG Vbus Valid Interrupt Fall */
-#define U2DOTGINT_FCK	(1 << 0)	/* RXCMD Carkit Interrupt Fall */
-
-#define U2DOTGUSR	(0x002C)	/* U2D OTG ULPI Status Register */
-#define U2DOTGUSR_LPA	(1 << 31)	/* ULPI Low Power Mode Active */
-#define U2DOTGUSR_S6A	(1 << 30)	/* ULPI Serial Mode (6-pin) Active */
-#define U2DOTGUSR_S3A	(1 << 29)	/* ULPI Serial Mode (3-pin) Active */
-#define U2DOTGUSR_CKA	(1 << 28)	/* ULPI Car Kit Mode Active */
-#define U2DOTGUSR_LS1	(1 << 6)	/* RXCMD Linestate 1 Status */
-#define U2DOTGUSR_LS0	(1 << 5)	/* RXCMD Linestate 0 Status */
-#define U2DOTGUSR_ID	(1 << 4)	/* OTG IDGnd Status */
-#define U2DOTGUSR_SE	(1 << 3)	/* OTG Session End Status */
-#define U2DOTGUSR_SV	(1 << 2)	/* OTG Session Valid Status */
-#define U2DOTGUSR_VV	(1 << 1)	/* OTG Vbus Valid Status */
-#define U2DOTGUSR_CK	(1 << 0)	/* Carkit Interrupt Status */
-
-#define U2DOTGUCR	(0x0030)	/* U2D OTG ULPI Control Register */
-#define U2DOTGUCR_RUN	(1    << 25)	/* RUN */
-#define U2DOTGUCR_RNW	(1    << 24)	/* Read or Write operation */
-#define U2DOTGUCR_ADDR	(0x3f << 16)	/* Address of the ULPI PHY register */
-#define U2DOTGUCR_WDATA	(0xff << 8)	/* The data for a WRITE command */
-#define U2DOTGUCR_RDATA	(0xff << 0)	/* The data for a READ command */
-
-#define U2DP3CR		(0x0034)	/* U2D Port 3 Control Register */
-#define U2DP3CR_P2SS	(0x3 << 8)	/* Host Port 2 Serial Mode Select */
-#define U2DP3CR_P3SS	(0x7 << 4)	/* Host Port 3 Serial Mode Select */
-#define U2DP3CR_VPVMBEN	(0x1 << 2)	/* Host Port 3 Vp/Vm Block Enable */
-#define U2DP3CR_CFG	(0x3 << 0)	/* Host Port 3 Configuration */
-
-#define U2DCSR0		(0x0100)	/* U2D Control/Status Register - Endpoint 0 */
-#define U2DCSR0_IPA	(1 << 8)	/* IN Packet Adjusted */
-#define U2DCSR0_SA	(1 << 7)	/* SETUP Active */
-#define U2DCSR0_RNE	(1 << 6)	/* Receive FIFO Not Empty */
-#define U2DCSR0_FST	(1 << 5)	/* Force Stall */
-#define U2DCSR0_SST	(1 << 4)	/* Send Stall */
-#define U2DCSR0_DME	(1 << 3)	/* DMA Enable */
-#define U2DCSR0_FTF	(1 << 2)	/* Flush Transmit FIFO */
-#define U2DCSR0_IPR	(1 << 1)	/* IN Packet Ready */
-#define U2DCSR0_OPC	(1 << 0)	/* OUT Packet Complete */
-
-#define U2DCSR(x)	(0x0100 + ((x) << 2))	/* U2D Control/Status Register - Endpoint x */
-#define U2DCSR_BF	(1 << 10)	/* Buffer Full, for OUT eps */
-#define U2DCSR_BE	(1 << 10)	/* Buffer Empty, for IN eps */
-#define U2DCSR_DPE	(1 << 9)	/* Data Packet Error, for ISO eps only */
-#define U2DCSR_FEF	(1 << 8)	/* Flush Endpoint FIFO */
-#define U2DCSR_SP	(1 << 7)	/* Short Packet Control/Status, for OUT eps only, readonly */
-#define U2DCSR_BNE	(1 << 6)	/* Buffer Not Empty, for OUT eps */
-#define U2DCSR_BNF	(1 << 6)	/* Buffer Not Full, for IN eps */
-#define U2DCSR_FST	(1 << 5)	/* Force STALL, write 1 set */
-#define U2DCSR_SST	(1 << 4)	/* Sent STALL, write 1 clear */
-#define U2DCSR_DME	(1 << 3)	/* DMA Enable */
-#define U2DCSR_TRN	(1 << 2)	/* Tx/Rx NAK, write 1 clear */
-#define U2DCSR_PC	(1 << 1)	/* Packet Complete, write 1 clear */
-#define U2DCSR_FS	(1 << 0)	/* FIFO needs Service */
-
-#define U2DBCR0		(0x0200)		/* U2D Byte Count Register - Endpoint 0 */
-#define U2DBCR(x)	(0x0200 + ((x) << 2))	/* U2D Byte Count Register - Endpoint x */
-
-#define U2DDR0		(0x0300)		/* U2D Data Register - Endpoint 0 */
-
-#define U2DEPCR(x)	(0x0400 + ((x) << 2))	/* U2D Configuration Register - Endpoint x */
-#define U2DEPCR_EE	(1 << 0)		/* Endpoint Enable */
-#define U2DEPCR_BS_MASK	(0x3FE)			/* Buffer Size, BS*8=FIFO size, max 8184B = 8KB */
-
-#define U2DSCA		(0x0500)		/* U2D Setup Command Address */
-#define U2DSCA_VALUE	(0x0120)
-
-#define U2DEN0		(0x0504)		/* U2D Endpoint Information Register - Endpoint 0 */
-#define U2DEN(x)	(0x0504 + ((x) << 2))	/* U2D Endpoint Information Register - Endpoint x */
-
-/* U2DMA registers */
-#define U2DMACSR0		(0x1000)	/* U2DMA Control/Status Register - Channel 0 */
-#define U2DMACSR(x)		(0x1000 + ((x) << 2))	/* U2DMA Control/Status Register - Channel x */
-#define U2DMACSR_RUN		(1 << 31)	/* Run Bit (read / write) */
-#define U2DMACSR_STOPIRQEN	(1 << 29)	/* Stop Interrupt Enable (read / write) */
-#define U2DMACSR_EORIRQEN	(1 << 28)	/* End of Receive Interrupt Enable (R/W) */
-#define U2DMACSR_EORJMPEN	(1 << 27)	/* Jump to next descriptor on EOR */
-#define U2DMACSR_EORSTOPEN	(1 << 26)	/* STOP on an EOR */
-#define U2DMACSR_RASIRQEN	(1 << 23)	/* Request After Cnannel Stopped Interrupt Enable */
-#define U2DMACSR_MASKRUN	(1 << 22)	/* Mask Run */
-#define U2DMACSR_SCEMC		(3 << 18)	/* System Bus Split Completion Error Message Class */
-#define U2DMACSR_SCEMI		(0x1f << 13)	/* System Bus Split Completion Error Message Index */
-#define U2DMACSR_BUSERRTYPE	(7 << 10)	/* PX Bus Error Type */
-#define U2DMACSR_EORINTR	(1 << 9)	/* End Of Receive */
-#define U2DMACSR_REQPEND	(1 << 8)	/* Request Pending */
-#define U2DMACSR_RASINTR	(1 << 4)	/* Request After Channel Stopped (read / write 1 clear) */
-#define U2DMACSR_STOPINTR	(1 << 3)	/* Stop Interrupt (read only) */
-#define U2DMACSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write 1 clear) */
-#define U2DMACSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write 1 clear) */
-#define U2DMACSR_BUSERRINTR	(1 << 0)	/* Bus Error Interrupt (read / write 1 clear) */
-
-#define U2DMACR		(0x1080)		/* U2DMA Control Register */
-#define U2DMAINT	(0x10F0)		/* U2DMA Interrupt Register */
-
-#define U2DMABR0	(0x1100)		/* U2DMA Branch Register - Channel 0 */
-#define U2DMABR(x)      (0x1100 + (x) << 2)	/* U2DMA Branch Register - Channel x */
-
-#define U2DMADADR0      (0x1200)		/* U2DMA Descriptor Address Register - Channel 0 */
-#define U2DMADADR(x)    (0x1200 + (x) * 0x10)	/* U2DMA Descriptor Address Register - Channel x */
-
-#define U2DMADADR_STOP	(1U << 0)
-
-#define U2DMASADR0	(0x1204)		/* U2DMA Source Address Register - Channel 0 */
-#define U2DMASADR(x)	(0x1204 + (x) * 0x10)	/* U2DMA Source Address Register - Channel x */
-#define U2DMATADR0	(0x1208)		/* U2DMA Target Address Register - Channel 0 */
-#define U2DMATADR(x)	(0x1208 + (x) * 0x10)	/* U2DMA Target Address Register - Channel x */
-
-#define U2DMACMDR0	(0x120C)		/* U2DMA Command Address Register - Channel 0 */
-#define U2DMACMDR(x)	(0x120C + (x) * 0x10)	/* U2DMA Command Address Register - Channel x */
-
-#define U2DMACMDR_XFRDIS	(1 << 31)	/* Transfer Direction */
-#define U2DMACMDR_STARTIRQEN	(1 << 22)	/* Start Interrupt Enable */
-#define U2DMACMDR_ENDIRQEN	(1 << 21)	/* End Interrupt Enable */
-#define U2DMACMDR_PACKCOMP	(1 << 13)	/* Packet Complete */
-#define U2DMACMDR_LEN		(0x07ff)	/* length mask (max = 2K - 1) */
-
-#endif /* __ASM_ARCH_PXA3xx_U2D_H */
diff --git a/arch/arm/mach-pxa/regs-uart.h b/arch/arm/mach-pxa/regs-uart.h
deleted file mode 100644
index 490e9ca16297..000000000000
--- a/arch/arm/mach-pxa/regs-uart.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_ARCH_REGS_UART_H
-#define __ASM_ARCH_REGS_UART_H
-
-#include "pxa-regs.h"
-
-/*
- * UARTs
- */
-
-/* Full Function UART (FFUART) */
-#define FFUART		FFRBR
-#define FFRBR		__REG(0x40100000)  /* Receive Buffer Register (read only) */
-#define FFTHR		__REG(0x40100000)  /* Transmit Holding Register (write only) */
-#define FFIER		__REG(0x40100004)  /* Interrupt Enable Register (read/write) */
-#define FFIIR		__REG(0x40100008)  /* Interrupt ID Register (read only) */
-#define FFFCR		__REG(0x40100008)  /* FIFO Control Register (write only) */
-#define FFLCR		__REG(0x4010000C)  /* Line Control Register (read/write) */
-#define FFMCR		__REG(0x40100010)  /* Modem Control Register (read/write) */
-#define FFLSR		__REG(0x40100014)  /* Line Status Register (read only) */
-#define FFMSR		__REG(0x40100018)  /* Modem Status Register (read only) */
-#define FFSPR		__REG(0x4010001C)  /* Scratch Pad Register (read/write) */
-#define FFISR		__REG(0x40100020)  /* Infrared Selection Register (read/write) */
-#define FFDLL		__REG(0x40100000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define FFDLH		__REG(0x40100004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Bluetooth UART (BTUART) */
-#define BTUART		BTRBR
-#define BTRBR		__REG(0x40200000)  /* Receive Buffer Register (read only) */
-#define BTTHR		__REG(0x40200000)  /* Transmit Holding Register (write only) */
-#define BTIER		__REG(0x40200004)  /* Interrupt Enable Register (read/write) */
-#define BTIIR		__REG(0x40200008)  /* Interrupt ID Register (read only) */
-#define BTFCR		__REG(0x40200008)  /* FIFO Control Register (write only) */
-#define BTLCR		__REG(0x4020000C)  /* Line Control Register (read/write) */
-#define BTMCR		__REG(0x40200010)  /* Modem Control Register (read/write) */
-#define BTLSR		__REG(0x40200014)  /* Line Status Register (read only) */
-#define BTMSR		__REG(0x40200018)  /* Modem Status Register (read only) */
-#define BTSPR		__REG(0x4020001C)  /* Scratch Pad Register (read/write) */
-#define BTISR		__REG(0x40200020)  /* Infrared Selection Register (read/write) */
-#define BTDLL		__REG(0x40200000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define BTDLH		__REG(0x40200004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Standard UART (STUART) */
-#define STUART		STRBR
-#define STRBR		__REG(0x40700000)  /* Receive Buffer Register (read only) */
-#define STTHR		__REG(0x40700000)  /* Transmit Holding Register (write only) */
-#define STIER		__REG(0x40700004)  /* Interrupt Enable Register (read/write) */
-#define STIIR		__REG(0x40700008)  /* Interrupt ID Register (read only) */
-#define STFCR		__REG(0x40700008)  /* FIFO Control Register (write only) */
-#define STLCR		__REG(0x4070000C)  /* Line Control Register (read/write) */
-#define STMCR		__REG(0x40700010)  /* Modem Control Register (read/write) */
-#define STLSR		__REG(0x40700014)  /* Line Status Register (read only) */
-#define STMSR		__REG(0x40700018)  /* Reserved */
-#define STSPR		__REG(0x4070001C)  /* Scratch Pad Register (read/write) */
-#define STISR		__REG(0x40700020)  /* Infrared Selection Register (read/write) */
-#define STDLL		__REG(0x40700000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define STDLH		__REG(0x40700004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Hardware UART (HWUART) */
-#define HWUART		HWRBR
-#define HWRBR		__REG(0x41600000)  /* Receive Buffer Register (read only) */
-#define HWTHR		__REG(0x41600000)  /* Transmit Holding Register (write only) */
-#define HWIER		__REG(0x41600004)  /* Interrupt Enable Register (read/write) */
-#define HWIIR		__REG(0x41600008)  /* Interrupt ID Register (read only) */
-#define HWFCR		__REG(0x41600008)  /* FIFO Control Register (write only) */
-#define HWLCR		__REG(0x4160000C)  /* Line Control Register (read/write) */
-#define HWMCR		__REG(0x41600010)  /* Modem Control Register (read/write) */
-#define HWLSR		__REG(0x41600014)  /* Line Status Register (read only) */
-#define HWMSR		__REG(0x41600018)  /* Modem Status Register (read only) */
-#define HWSPR		__REG(0x4160001C)  /* Scratch Pad Register (read/write) */
-#define HWISR		__REG(0x41600020)  /* Infrared Selection Register (read/write) */
-#define HWFOR		__REG(0x41600024)  /* Receive FIFO Occupancy Register (read only) */
-#define HWABR		__REG(0x41600028)  /* Auto-Baud Control Register (read/write) */
-#define HWACR		__REG(0x4160002C)  /* Auto-Baud Count Register (read only) */
-#define HWDLL		__REG(0x41600000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define HWDLH		__REG(0x41600004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-#define IER_DMAE	(1 << 7)	/* DMA Requests Enable */
-#define IER_UUE		(1 << 6)	/* UART Unit Enable */
-#define IER_NRZE	(1 << 5)	/* NRZ coding Enable */
-#define IER_RTIOE	(1 << 4)	/* Receiver Time Out Interrupt Enable */
-#define IER_MIE		(1 << 3)	/* Modem Interrupt Enable */
-#define IER_RLSE	(1 << 2)	/* Receiver Line Status Interrupt Enable */
-#define IER_TIE		(1 << 1)	/* Transmit Data request Interrupt Enable */
-#define IER_RAVIE	(1 << 0)	/* Receiver Data Available Interrupt Enable */
-
-#define IIR_FIFOES1	(1 << 7)	/* FIFO Mode Enable Status */
-#define IIR_FIFOES0	(1 << 6)	/* FIFO Mode Enable Status */
-#define IIR_TOD		(1 << 3)	/* Time Out Detected */
-#define IIR_IID2	(1 << 2)	/* Interrupt Source Encoded */
-#define IIR_IID1	(1 << 1)	/* Interrupt Source Encoded */
-#define IIR_IP		(1 << 0)	/* Interrupt Pending (active low) */
-
-#define FCR_ITL2	(1 << 7)	/* Interrupt Trigger Level */
-#define FCR_ITL1	(1 << 6)	/* Interrupt Trigger Level */
-#define FCR_RESETTF	(1 << 2)	/* Reset Transmitter FIFO */
-#define FCR_RESETRF	(1 << 1)	/* Reset Receiver FIFO */
-#define FCR_TRFIFOE	(1 << 0)	/* Transmit and Receive FIFO Enable */
-#define FCR_ITL_1	(0)
-#define FCR_ITL_8	(FCR_ITL1)
-#define FCR_ITL_16	(FCR_ITL2)
-#define FCR_ITL_32	(FCR_ITL2|FCR_ITL1)
-
-#define LCR_DLAB	(1 << 7)	/* Divisor Latch Access Bit */
-#define LCR_SB		(1 << 6)	/* Set Break */
-#define LCR_STKYP	(1 << 5)	/* Sticky Parity */
-#define LCR_EPS		(1 << 4)	/* Even Parity Select */
-#define LCR_PEN		(1 << 3)	/* Parity Enable */
-#define LCR_STB		(1 << 2)	/* Stop Bit */
-#define LCR_WLS1	(1 << 1)	/* Word Length Select */
-#define LCR_WLS0	(1 << 0)	/* Word Length Select */
-
-#define LSR_FIFOE	(1 << 7)	/* FIFO Error Status */
-#define LSR_TEMT	(1 << 6)	/* Transmitter Empty */
-#define LSR_TDRQ	(1 << 5)	/* Transmit Data Request */
-#define LSR_BI		(1 << 4)	/* Break Interrupt */
-#define LSR_FE		(1 << 3)	/* Framing Error */
-#define LSR_PE		(1 << 2)	/* Parity Error */
-#define LSR_OE		(1 << 1)	/* Overrun Error */
-#define LSR_DR		(1 << 0)	/* Data Ready */
-
-#define MCR_LOOP	(1 << 4)
-#define MCR_OUT2	(1 << 3)	/* force MSR_DCD in loopback mode */
-#define MCR_OUT1	(1 << 2)	/* force MSR_RI in loopback mode */
-#define MCR_RTS		(1 << 1)	/* Request to Send */
-#define MCR_DTR		(1 << 0)	/* Data Terminal Ready */
-
-#define MSR_DCD		(1 << 7)	/* Data Carrier Detect */
-#define MSR_RI		(1 << 6)	/* Ring Indicator */
-#define MSR_DSR		(1 << 5)	/* Data Set Ready */
-#define MSR_CTS		(1 << 4)	/* Clear To Send */
-#define MSR_DDCD	(1 << 3)	/* Delta Data Carrier Detect */
-#define MSR_TERI	(1 << 2)	/* Trailing Edge Ring Indicator */
-#define MSR_DDSR	(1 << 1)	/* Delta Data Set Ready */
-#define MSR_DCTS	(1 << 0)	/* Delta Clear To Send */
-
-/*
- * IrSR (Infrared Selection Register)
- */
-#define STISR_RXPL      (1 << 4)        /* Receive Data Polarity */
-#define STISR_TXPL      (1 << 3)        /* Transmit Data Polarity */
-#define STISR_XMODE     (1 << 2)        /* Transmit Pulse Width Select */
-#define STISR_RCVEIR    (1 << 1)        /* Receiver SIR Enable */
-#define STISR_XMITIR    (1 << 0)        /* Transmitter SIR Enable */
-
-#endif /* __ASM_ARCH_REGS_UART_H */
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
deleted file mode 100644
index 3275b679792b..000000000000
--- a/arch/arm/mach-pxa/saar.c
+++ /dev/null
@@ -1,604 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/saar.c
- *
- *  Support for the Marvell PXA930 Handheld Platform (aka SAAR)
- *
- *  Copyright (C) 2007-2008 Marvell International Ltd.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/smc91x.h>
-#include <linux/mfd/da903x.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/onenand.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#include "pxa930.h"
-#include <linux/platform_data/video-pxafb.h>
-
-#include "devices.h"
-#include "generic.h"
-
-#define GPIO_LCD_RESET		(16)
-
-/* SAAR MFP configurations */
-static mfp_cfg_t saar_mfp_cfg[] __initdata = {
-	/* LCD */
-	GPIO23_LCD_DD0,
-	GPIO24_LCD_DD1,
-	GPIO25_LCD_DD2,
-	GPIO26_LCD_DD3,
-	GPIO27_LCD_DD4,
-	GPIO28_LCD_DD5,
-	GPIO29_LCD_DD6,
-	GPIO44_LCD_DD7,
-	GPIO21_LCD_CS,
-	GPIO22_LCD_VSYNC,
-	GPIO17_LCD_FCLK_RD,
-	GPIO18_LCD_LCLK_A0,
-	GPIO19_LCD_PCLK_WR,
-	GPIO16_GPIO, /* LCD reset */
-
-	/* Ethernet */
-	DF_nCS1_nCS3,
-	GPIO97_GPIO,
-
-	/* DFI */
-	DF_INT_RnB_ND_INT_RnB,
-	DF_nRE_nOE_ND_nRE,
-	DF_nWE_ND_nWE,
-	DF_CLE_nOE_ND_CLE,
-	DF_nADV1_ALE_ND_ALE,
-	DF_nADV2_ALE_nCS3,
-	DF_nCS0_ND_nCS0,
-	DF_IO0_ND_IO0,
-	DF_IO1_ND_IO1,
-	DF_IO2_ND_IO2,
-	DF_IO3_ND_IO3,
-	DF_IO4_ND_IO4,
-	DF_IO5_ND_IO5,
-	DF_IO6_ND_IO6,
-	DF_IO7_ND_IO7,
-	DF_IO8_ND_IO8,
-	DF_IO9_ND_IO9,
-	DF_IO10_ND_IO10,
-	DF_IO11_ND_IO11,
-	DF_IO12_ND_IO12,
-	DF_IO13_ND_IO13,
-	DF_IO14_ND_IO14,
-	DF_IO15_ND_IO15,
-};
-
-#define SAAR_ETH_PHYS	(0x14000000)
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= (SAAR_ETH_PHYS + 0x300),
-		.end	= (SAAR_ETH_PHYS + 0xfffff),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO97)),
-		.end	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO97)),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct smc91x_platdata saar_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &saar_smc91x_info,
-	},
-};
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static uint16_t lcd_power_on[] = {
-	/* single frame */
-	SMART_CMD_NOOP,
-	SMART_CMD(0x00),
-	SMART_DELAY(0),
-
-	SMART_CMD_NOOP,
-	SMART_CMD(0x00),
-	SMART_DELAY(0),
-
-	SMART_CMD_NOOP,
-	SMART_CMD(0x00),
-	SMART_DELAY(0),
-
-	SMART_CMD_NOOP,
-	SMART_CMD(0x00),
-	SMART_DELAY(10),
-
-	/* calibration control */
-	SMART_CMD(0x00),
-	SMART_CMD(0xA4),
-	SMART_DAT(0x80),
-	SMART_DAT(0x01),
-	SMART_DELAY(150),
-
-	/*Power-On Init sequence*/
-	SMART_CMD(0x00),	/* output ctrl */
-	SMART_CMD(0x01),
-	SMART_DAT(0x01),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),	/* wave ctrl */
-	SMART_CMD(0x02),
-	SMART_DAT(0x07),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x03),	/* entry mode */
-	SMART_DAT(0xD0),
-	SMART_DAT(0x30),
-	SMART_CMD(0x00),
-	SMART_CMD(0x08),	/* display ctrl 2 */
-	SMART_DAT(0x08),
-	SMART_DAT(0x08),
-	SMART_CMD(0x00),
-	SMART_CMD(0x09),	/* display ctrl 3 */
-	SMART_DAT(0x04),
-	SMART_DAT(0x2F),
-	SMART_CMD(0x00),
-	SMART_CMD(0x0A),	/* display ctrl 4 */
-	SMART_DAT(0x00),
-	SMART_DAT(0x08),
-	SMART_CMD(0x00),
-	SMART_CMD(0x0D),	/* Frame Marker position */
-	SMART_DAT(0x00),
-	SMART_DAT(0x08),
-	SMART_CMD(0x00),
-	SMART_CMD(0x60),	/* Driver output control */
-	SMART_DAT(0x27),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x61),	/* Base image display control */
-	SMART_DAT(0x00),
-	SMART_DAT(0x01),
-	SMART_CMD(0x00),
-	SMART_CMD(0x30),	/* Y settings 30h-3Dh */
-	SMART_DAT(0x07),
-	SMART_DAT(0x07),
-	SMART_CMD(0x00),
-	SMART_CMD(0x31),
-	SMART_DAT(0x00),
-	SMART_DAT(0x07),
-	SMART_CMD(0x00),
-	SMART_CMD(0x32),	/* Timing(3), ASW HOLD=0.5CLK */
-	SMART_DAT(0x04),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x33),	/* Timing(4), CKV ST=0CLK, CKV ED=1CLK */
-	SMART_DAT(0x03),
-	SMART_DAT(0x03),
-	SMART_CMD(0x00),
-	SMART_CMD(0x34),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x35),
-	SMART_DAT(0x02),
-	SMART_DAT(0x05),
-	SMART_CMD(0x00),
-	SMART_CMD(0x36),
-	SMART_DAT(0x1F),
-	SMART_DAT(0x1F),
-	SMART_CMD(0x00),
-	SMART_CMD(0x37),
-	SMART_DAT(0x07),
-	SMART_DAT(0x07),
-	SMART_CMD(0x00),
-	SMART_CMD(0x38),
-	SMART_DAT(0x00),
-	SMART_DAT(0x07),
-	SMART_CMD(0x00),
-	SMART_CMD(0x39),
-	SMART_DAT(0x04),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x3A),
-	SMART_DAT(0x03),
-	SMART_DAT(0x03),
-	SMART_CMD(0x00),
-	SMART_CMD(0x3B),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x3C),
-	SMART_DAT(0x02),
-	SMART_DAT(0x05),
-	SMART_CMD(0x00),
-	SMART_CMD(0x3D),
-	SMART_DAT(0x1F),
-	SMART_DAT(0x1F),
-	SMART_CMD(0x00),	/* Display control 1 */
-	SMART_CMD(0x07),
-	SMART_DAT(0x00),
-	SMART_DAT(0x01),
-	SMART_CMD(0x00),	/* Power control 5 */
-	SMART_CMD(0x17),
-	SMART_DAT(0x00),
-	SMART_DAT(0x01),
-	SMART_CMD(0x00),	/* Power control 1 */
-	SMART_CMD(0x10),
-	SMART_DAT(0x10),
-	SMART_DAT(0xB0),
-	SMART_CMD(0x00),	/* Power control 2 */
-	SMART_CMD(0x11),
-	SMART_DAT(0x01),
-	SMART_DAT(0x30),
-	SMART_CMD(0x00),	/* Power control 3 */
-	SMART_CMD(0x12),
-	SMART_DAT(0x01),
-	SMART_DAT(0x9E),
-	SMART_CMD(0x00),	/* Power control 4 */
-	SMART_CMD(0x13),
-	SMART_DAT(0x17),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),	/* Power control 3 */
-	SMART_CMD(0x12),
-	SMART_DAT(0x01),
-	SMART_DAT(0xBE),
-	SMART_DELAY(100),
-
-	/* display mode : 240*320 */
-	SMART_CMD(0x00),	/* RAM address set(H) 0*/
-	SMART_CMD(0x20),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),	/* RAM address set(V)   4*/
-	SMART_CMD(0x21),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),	/* Start of Window RAM address set(H) 8*/
-	SMART_CMD(0x50),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00), 	/* End of Window RAM address set(H) 12*/
-	SMART_CMD(0x51),
-	SMART_DAT(0x00),
-	SMART_DAT(0xEF),
-	SMART_CMD(0x00),	/* Start of Window RAM address set(V) 16*/
-	SMART_CMD(0x52),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),	/* End of Window RAM address set(V) 20*/
-	SMART_CMD(0x53),
-	SMART_DAT(0x01),
-	SMART_DAT(0x3F),
-	SMART_CMD(0x00), 	/* Panel interface control 1 */
-	SMART_CMD(0x90),
-	SMART_DAT(0x00),
-	SMART_DAT(0x1A),
-	SMART_CMD(0x00), 	/* Panel interface control 2 */
-	SMART_CMD(0x92),
-	SMART_DAT(0x04),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00), 	/* Panel interface control 3 */
-	SMART_CMD(0x93),
-	SMART_DAT(0x00),
-	SMART_DAT(0x05),
-	SMART_DELAY(20),
-};
-
-static uint16_t lcd_panel_on[] = {
-	SMART_CMD(0x00),
-	SMART_CMD(0x07),
-	SMART_DAT(0x00),
-	SMART_DAT(0x21),
-	SMART_DELAY(1),
-
-	SMART_CMD(0x00),
-	SMART_CMD(0x07),
-	SMART_DAT(0x00),
-	SMART_DAT(0x61),
-	SMART_DELAY(100),
-
-	SMART_CMD(0x00),
-	SMART_CMD(0x07),
-	SMART_DAT(0x01),
-	SMART_DAT(0x73),
-	SMART_DELAY(1),
-};
-
-static uint16_t lcd_panel_off[] = {
-	SMART_CMD(0x00),
-	SMART_CMD(0x07),
-	SMART_DAT(0x00),
-	SMART_DAT(0x72),
-	SMART_DELAY(40),
-
-	SMART_CMD(0x00),
-	SMART_CMD(0x07),
-	SMART_DAT(0x00),
-	SMART_DAT(0x01),
-	SMART_DELAY(1),
-
-	SMART_CMD(0x00),
-	SMART_CMD(0x07),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_DELAY(1),
-};
-
-static uint16_t lcd_power_off[] = {
-	SMART_CMD(0x00),
-	SMART_CMD(0x10),
-	SMART_DAT(0x00),
-	SMART_DAT(0x80),
-
-	SMART_CMD(0x00),
-	SMART_CMD(0x11),
-	SMART_DAT(0x01),
-	SMART_DAT(0x60),
-
-	SMART_CMD(0x00),
-	SMART_CMD(0x12),
-	SMART_DAT(0x01),
-	SMART_DAT(0xAE),
-	SMART_DELAY(40),
-
-	SMART_CMD(0x00),
-	SMART_CMD(0x10),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-};
-
-static uint16_t update_framedata[] = {
-	/* set display ram: 240*320 */
-	SMART_CMD(0x00), /* RAM address set(H) 0*/
-	SMART_CMD(0x20),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00), /* RAM address set(V) 4*/
-	SMART_CMD(0x21),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00), /* Start of Window RAM address set(H) 8 */
-	SMART_CMD(0x50),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00), /* End of Window RAM address set(H) 12 */
-	SMART_CMD(0x51),
-	SMART_DAT(0x00),
-	SMART_DAT(0xEF),
-	SMART_CMD(0x00), /* Start of Window RAM address set(V) 16 */
-	SMART_CMD(0x52),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00), /* End of Window RAM address set(V) 20 */
-	SMART_CMD(0x53),
-	SMART_DAT(0x01),
-	SMART_DAT(0x3F),
-
-	/* wait for vsync cmd before transferring frame data */
-	SMART_CMD_WAIT_FOR_VSYNC,
-
-	/* write ram */
-	SMART_CMD(0x00),
-	SMART_CMD(0x22),
-
-	/* write frame data */
-	SMART_CMD_WRITE_FRAME,
-};
-
-static void ltm022a97a_lcd_power(int on, struct fb_var_screeninfo *var)
-{
-	static int pin_requested = 0;
-	struct fb_info *info = container_of(var, struct fb_info, var);
-	int err;
-
-	if (!pin_requested) {
-		err = gpio_request(GPIO_LCD_RESET, "lcd reset");
-		if (err) {
-			pr_err("failed to request gpio for LCD reset\n");
-			return;
-		}
-
-		gpio_direction_output(GPIO_LCD_RESET, 0);
-		pin_requested = 1;
-	}
-
-	if (on) {
-		gpio_set_value(GPIO_LCD_RESET, 0); msleep(100);
-		gpio_set_value(GPIO_LCD_RESET, 1); msleep(10);
-
-		pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_power_on));
-		pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_panel_on));
-	} else {
-		pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_panel_off));
-		pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_power_off));
-	}
-
-	err = pxafb_smart_flush(info);
-	if (err)
-		pr_err("%s: timed out\n", __func__);
-}
-
-static void ltm022a97a_update(struct fb_info *info)
-{
-	pxafb_smart_queue(info, ARRAY_AND_SIZE(update_framedata));
-	pxafb_smart_flush(info);
-}
-
-static struct pxafb_mode_info toshiba_ltm022a97a_modes[] = {
-	[0] = {
-		.xres			= 240,
-		.yres			= 320,
-		.bpp			= 16,
-		.a0csrd_set_hld		= 30,
-		.a0cswr_set_hld		= 30,
-		.wr_pulse_width		= 30,
-		.rd_pulse_width 	= 30,
-		.op_hold_time 		= 30,
-		.cmd_inh_time		= 60,
-
-		/* L_LCLK_A0 and L_LCLK_RD active low */
-		.sync			= FB_SYNC_HOR_HIGH_ACT |
-					  FB_SYNC_VERT_HIGH_ACT,
-	},
-};
-
-static struct pxafb_mach_info saar_lcd_info = {
-	.modes			= toshiba_ltm022a97a_modes,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_SMART_PANEL_8BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_lcd_power	= ltm022a97a_lcd_power,
-	.smart_update		= ltm022a97a_update,
-};
-
-static void __init saar_init_lcd(void)
-{
-	pxa_set_fb_info(NULL, &saar_lcd_info);
-}
-#else
-static inline void saar_init_lcd(void) {}
-#endif
-
-#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
-static struct da9034_backlight_pdata saar_da9034_backlight = {
-	.output_current	= 4,	/* 4mA */
-};
-
-static struct da903x_subdev_info saar_da9034_subdevs[] = {
-	[0] = {
-		.name		= "da903x-backlight",
-		.id		= DA9034_ID_WLED,
-		.platform_data	= &saar_da9034_backlight,
-	},
-};
-
-static struct da903x_platform_data saar_da9034_info = {
-	.num_subdevs	= ARRAY_SIZE(saar_da9034_subdevs),
-	.subdevs	= saar_da9034_subdevs,
-};
-
-static struct i2c_board_info saar_i2c_info[] = {
-	[0] = {
-		.type		= "da9034",
-		.addr		= 0x34,
-		.platform_data	= &saar_da9034_info,
-		.irq		= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)),
-	},
-};
-
-static void __init saar_init_i2c(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(saar_i2c_info));
-}
-#else
-static inline void saar_init_i2c(void) {}
-#endif
-
-#if defined(CONFIG_MTD_ONENAND) || defined(CONFIG_MTD_ONENAND_MODULE)
-static struct mtd_partition saar_onenand_partitions[] = {
-	{
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= SZ_1M,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "reserved",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "reserved",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_8M,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= (SZ_2M + SZ_1M),
-		.mask_flags	= 0,
-	}, {
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_32M + SZ_16M,
-		.mask_flags	= 0,
-	}
-};
-
-static struct onenand_platform_data saar_onenand_info = {
-	.parts		= saar_onenand_partitions,
-	.nr_parts	= ARRAY_SIZE(saar_onenand_partitions),
-};
-
-#define SMC_CS0_PHYS_BASE	(0x10000000)
-
-static struct resource saar_resource_onenand[] = {
-	[0] = {
-		.start	= SMC_CS0_PHYS_BASE,
-		.end	= SMC_CS0_PHYS_BASE + SZ_1M,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device saar_device_onenand = {
-	.name		= "onenand-flash",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &saar_onenand_info,
-	},
-	.resource	= saar_resource_onenand,
-	.num_resources	= ARRAY_SIZE(saar_resource_onenand),
-};
-
-static void __init saar_init_onenand(void)
-{
-	platform_device_register(&saar_device_onenand);
-}
-#else
-static void __init saar_init_onenand(void) {}
-#endif
-
-static void __init saar_init(void)
-{
-	/* initialize MFP configurations */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(saar_mfp_cfg));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	platform_device_register(&smc91x_device);
-	saar_init_onenand();
-
-	saar_init_i2c();
-	saar_init_lcd();
-}
-
-MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
-	/* Maintainer: Eric Miao <eric.miao@marvell.com> */
-	.atag_offset    = 0x100,
-	.map_io         = pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq       = pxa3xx_init_irq,
-	.handle_irq       = pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine   = saar_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index a829baf8d922..929cc51ed7c2 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -170,10 +170,6 @@ extern int max1111_read_channel(int);
  */
 int sharpsl_pm_pxa_read_max1111(int channel)
 {
-	/* Ugly, better move this function into another module */
-	if (machine_is_tosa())
-	    return 0;
-
 	/* max1111 accepts channels from 0-3, however,
 	 * it is encoded from 0-7 here in the code.
 	 */
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 9964729cd428..26f0ebc4d136 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -40,7 +40,6 @@
 #include "pxa27x.h"
 #include "pxa27x-udc.h"
 #include "reset.h"
-#include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/video-pxafb.h>
@@ -688,27 +687,6 @@ static inline void spitz_uhc_init(void) {}
 #endif
 
 /******************************************************************************
- * IrDA
- ******************************************************************************/
-#if defined(CONFIG_PXA_FICP) || defined(CONFIG_PXA_FICP_MODULE)
-static struct pxaficp_platform_data spitz_ficp_platform_data = {
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-static void __init spitz_irda_init(void)
-{
-	if (machine_is_akita())
-		spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON;
-	else
-		spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
-
-	pxa_set_ficp_info(&spitz_ficp_platform_data);
-}
-#else
-static inline void spitz_irda_init(void) {}
-#endif
-
-/******************************************************************************
  * Framebuffer
  ******************************************************************************/
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
@@ -1042,7 +1020,6 @@ static void __init spitz_init(void)
 	spitz_leds_init();
 	spitz_mmc_init();
 	spitz_pcmcia_init();
-	spitz_irda_init();
 	spitz_uhc_init();
 	spitz_lcd_init();
 	spitz_nor_init();
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
deleted file mode 100644
index a15eb3b9484d..000000000000
--- a/arch/arm/mach-pxa/tavorevb.c
+++ /dev/null
@@ -1,506 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/tavorevb.c
- *
- *  Support for the Marvell PXA930 Evaluation Board
- *
- *  Copyright (C) 2007-2008 Marvell International Ltd.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/smc91x.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "pxa930.h"
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-
-#include "devices.h"
-#include "generic.h"
-
-/* Tavor EVB MFP configurations */
-static mfp_cfg_t tavorevb_mfp_cfg[] __initdata = {
-	/* Ethernet */
-	DF_nCS1_nCS3,
-	GPIO47_GPIO,
-
-	/* LCD */
-	GPIO23_LCD_DD0,
-	GPIO24_LCD_DD1,
-	GPIO25_LCD_DD2,
-	GPIO26_LCD_DD3,
-	GPIO27_LCD_DD4,
-	GPIO28_LCD_DD5,
-	GPIO29_LCD_DD6,
-	GPIO44_LCD_DD7,
-	GPIO21_LCD_CS,
-	GPIO22_LCD_CS2,
-
-	GPIO17_LCD_FCLK_RD,
-	GPIO18_LCD_LCLK_A0,
-	GPIO19_LCD_PCLK_WR,
-
-	/* LCD Backlight */
-	GPIO43_PWM3,	/* primary backlight */
-	GPIO32_PWM0,	/* secondary backlight */
-
-	/* Keypad */
-	GPIO0_KP_MKIN_0,
-	GPIO2_KP_MKIN_1,
-	GPIO4_KP_MKIN_2,
-	GPIO6_KP_MKIN_3,
-	GPIO8_KP_MKIN_4,
-	GPIO10_KP_MKIN_5,
-	GPIO12_KP_MKIN_6,
-	GPIO1_KP_MKOUT_0,
-	GPIO3_KP_MKOUT_1,
-	GPIO5_KP_MKOUT_2,
-	GPIO7_KP_MKOUT_3,
-	GPIO9_KP_MKOUT_4,
-	GPIO11_KP_MKOUT_5,
-	GPIO13_KP_MKOUT_6,
-
-	GPIO14_KP_DKIN_2,
-	GPIO15_KP_DKIN_3,
-};
-
-#define TAVOREVB_ETH_PHYS	(0x14000000)
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= (TAVOREVB_ETH_PHYS + 0x300),
-		.end	= (TAVOREVB_ETH_PHYS + 0xfffff),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO47)),
-		.end	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO47)),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct smc91x_platdata tavorevb_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &tavorevb_smc91x_info,
-	},
-};
-
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static const unsigned int tavorevb_matrix_key_map[] = {
-	/* KEY(row, col, key_code) */
-	KEY(0, 4, KEY_A), KEY(0, 5, KEY_B), KEY(0, 6, KEY_C),
-	KEY(1, 4, KEY_E), KEY(1, 5, KEY_F), KEY(1, 6, KEY_G),
-	KEY(2, 4, KEY_I), KEY(2, 5, KEY_J), KEY(2, 6, KEY_K),
-	KEY(3, 4, KEY_M), KEY(3, 5, KEY_N), KEY(3, 6, KEY_O),
-	KEY(4, 5, KEY_R), KEY(4, 6, KEY_S),
-	KEY(5, 4, KEY_U), KEY(5, 4, KEY_V), KEY(5, 6, KEY_W),
-
-	KEY(6, 4, KEY_Y), KEY(6, 5, KEY_Z),
-
-	KEY(0, 3, KEY_0), KEY(2, 0, KEY_1), KEY(2, 1, KEY_2), KEY(2, 2, KEY_3),
-	KEY(2, 3, KEY_4), KEY(1, 0, KEY_5), KEY(1, 1, KEY_6), KEY(1, 2, KEY_7),
-	KEY(1, 3, KEY_8), KEY(0, 2, KEY_9),
-
-	KEY(6, 6, KEY_SPACE),
-	KEY(0, 0, KEY_KPASTERISK), 	/* * */
-	KEY(0, 1, KEY_KPDOT), 		/* # */
-
-	KEY(4, 1, KEY_UP),
-	KEY(4, 3, KEY_DOWN),
-	KEY(4, 0, KEY_LEFT),
-	KEY(4, 2, KEY_RIGHT),
-	KEY(6, 0, KEY_HOME),
-	KEY(3, 2, KEY_END),
-	KEY(6, 1, KEY_DELETE),
-	KEY(5, 2, KEY_BACK),
-	KEY(6, 3, KEY_CAPSLOCK),	/* KEY_LEFTSHIFT), */
-
-	KEY(4, 4, KEY_ENTER),		/* scroll push */
-	KEY(6, 2, KEY_ENTER),		/* keypad action */
-
-	KEY(3, 1, KEY_SEND),
-	KEY(5, 3, KEY_RECORD),
-	KEY(5, 0, KEY_VOLUMEUP),
-	KEY(5, 1, KEY_VOLUMEDOWN),
-
-	KEY(3, 0, KEY_F22),	/* soft1 */
-	KEY(3, 3, KEY_F23),	/* soft2 */
-};
-
-static struct matrix_keymap_data tavorevb_matrix_keymap_data = {
-	.keymap		= tavorevb_matrix_key_map,
-	.keymap_size	= ARRAY_SIZE(tavorevb_matrix_key_map),
-};
-
-static struct pxa27x_keypad_platform_data tavorevb_keypad_info = {
-	.matrix_key_rows	= 7,
-	.matrix_key_cols	= 7,
-	.matrix_keymap_data	= &tavorevb_matrix_keymap_data,
-	.debounce_interval	= 30,
-};
-
-static void __init tavorevb_init_keypad(void)
-{
-	pxa_set_keypad_info(&tavorevb_keypad_info);
-}
-#else
-static inline void tavorevb_init_keypad(void) {}
-#endif /* CONFIG_KEYBOARD_PXA27x || CONFIG_KEYBOARD_PXA27x_MODULE */
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pwm_lookup tavorevb_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.0", NULL, 100000,
-		   PWM_POLARITY_NORMAL),
-	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.1", NULL, 100000,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data tavorevb_backlight_data[] = {
-	[0] = {
-		/* primary backlight */
-		.max_brightness	= 100,
-		.dft_brightness	= 100,
-	},
-	[1] = {
-		/* secondary backlight */
-		.max_brightness	= 100,
-		.dft_brightness	= 100,
-	},
-};
-
-static struct platform_device tavorevb_backlight_devices[] = {
-	[0] = {
-		.name		= "pwm-backlight",
-		.id		= 0,
-		.dev		= {
-			.platform_data = &tavorevb_backlight_data[0],
-		},
-	},
-	[1] = {
-		.name		= "pwm-backlight",
-		.id		= 1,
-		.dev		= {
-			.platform_data = &tavorevb_backlight_data[1],
-		},
-	},
-};
-
-static uint16_t panel_init[] = {
-	/* DSTB OUT */
-	SMART_CMD(0x00),
-	SMART_CMD_NOOP,
-	SMART_DELAY(1),
-
-	SMART_CMD(0x00),
-	SMART_CMD_NOOP,
-	SMART_DELAY(1),
-
-	SMART_CMD(0x00),
-	SMART_CMD_NOOP,
-	SMART_DELAY(1),
-
-	/* STB OUT */
-	SMART_CMD(0x00),
-	SMART_CMD(0x1D),
-	SMART_DAT(0x00),
-	SMART_DAT(0x05),
-	SMART_DELAY(1),
-
-	/* P-ON Init sequence */
-	SMART_CMD(0x00), /* OSC ON */
-	SMART_CMD(0x00),
-	SMART_DAT(0x00),
-	SMART_DAT(0x01),
-	SMART_CMD(0x00),
-	SMART_CMD(0x01), /* SOURCE DRIVER SHIFT DIRECTION and display RAM setting */
-	SMART_DAT(0x01),
-	SMART_DAT(0x27),
-	SMART_CMD(0x00),
-	SMART_CMD(0x02), /* LINE INV */
-	SMART_DAT(0x02),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x03), /* IF mode(1) */
-	SMART_DAT(0x01), /* 8bit smart mode(8-8),high speed write mode */
-	SMART_DAT(0x30),
-	SMART_CMD(0x07),
-	SMART_CMD(0x00), /* RAM Write Mode */
-	SMART_DAT(0x00),
-	SMART_DAT(0x03),
-	SMART_CMD(0x00),
-
-	/* DISPLAY Setting,  262K, fixed(NO scroll), no split screen */
-	SMART_CMD(0x07),
-	SMART_DAT(0x40), /* 16/18/19 BPP */
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x08), /* BP, FP Seting, BP=2H, FP=3H */
-	SMART_DAT(0x03),
-	SMART_DAT(0x02),
-	SMART_CMD(0x00),
-	SMART_CMD(0x0C), /* IF mode(2), using internal clock & MPU */
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x0D), /* Frame setting, 1Min. Frequence, 16CLK */
-	SMART_DAT(0x00),
-	SMART_DAT(0x10),
-	SMART_CMD(0x00),
-	SMART_CMD(0x12), /* Timing(1),ASW W=4CLK, ASW ST=1CLK */
-	SMART_DAT(0x03),
-	SMART_DAT(0x02),
-	SMART_CMD(0x00),
-	SMART_CMD(0x13), /* Timing(2),OEV ST=0.5CLK, OEV ED=1CLK */
-	SMART_DAT(0x01),
-	SMART_DAT(0x02),
-	SMART_CMD(0x00),
-	SMART_CMD(0x14), /* Timing(3), ASW HOLD=0.5CLK */
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x15), /* Timing(4), CKV ST=0CLK, CKV ED=1CLK */
-	SMART_DAT(0x20),
-	SMART_DAT(0x00),
-	SMART_CMD(0x00),
-	SMART_CMD(0x1C),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x03),
-	SMART_CMD(0x00),
-	SMART_DAT(0x04),
-	SMART_DAT(0x03),
-	SMART_CMD(0x03),
-	SMART_CMD(0x01),
-	SMART_DAT(0x03),
-	SMART_DAT(0x04),
-	SMART_CMD(0x03),
-	SMART_CMD(0x02),
-	SMART_DAT(0x04),
-	SMART_DAT(0x03),
-	SMART_CMD(0x03),
-	SMART_CMD(0x03),
-	SMART_DAT(0x03),
-	SMART_DAT(0x03),
-	SMART_CMD(0x03),
-	SMART_CMD(0x04),
-	SMART_DAT(0x01),
-	SMART_DAT(0x01),
-	SMART_CMD(0x03),
-	SMART_CMD(0x05),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x04),
-	SMART_CMD(0x02),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x04),
-	SMART_CMD(0x03),
-	SMART_DAT(0x01),
-	SMART_DAT(0x3F),
-	SMART_DELAY(0),
-
-	/* DISP RAM setting: 240*320 */
-	SMART_CMD(0x04), /* HADDR, START 0 */
-	SMART_CMD(0x06),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00), /* x1,3 */
-	SMART_CMD(0x04), /* HADDR,  END   4 */
-	SMART_CMD(0x07),
-	SMART_DAT(0x00),
-	SMART_DAT(0xEF), /* x2, 7 */
-	SMART_CMD(0x04), /* VADDR, START 8 */
-	SMART_CMD(0x08),
-	SMART_DAT(0x00), /* y1, 10 */
-	SMART_DAT(0x00), /* y1, 11 */
-	SMART_CMD(0x04), /* VADDR, END 12 */
-	SMART_CMD(0x09),
-	SMART_DAT(0x01), /* y2, 14 */
-	SMART_DAT(0x3F), /* y2, 15 */
-	SMART_CMD(0x02), /* RAM ADDR SETTING 16 */
-	SMART_CMD(0x00),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00), /* x1, 19 */
-	SMART_CMD(0x02), /* RAM ADDR SETTING 20 */
-	SMART_CMD(0x01),
-	SMART_DAT(0x00), /* y1, 22 */
-	SMART_DAT(0x00), /* y1, 23 */
-};
-
-static uint16_t panel_on[] = {
-	/* Power-IC ON */
-	SMART_CMD(0x01),
-	SMART_CMD(0x02),
-	SMART_DAT(0x07),
-	SMART_DAT(0x7D),
-	SMART_CMD(0x01),
-	SMART_CMD(0x03),
-	SMART_DAT(0x00),
-	SMART_DAT(0x05),
-	SMART_CMD(0x01),
-	SMART_CMD(0x04),
-	SMART_DAT(0x00),
-	SMART_DAT(0x00),
-	SMART_CMD(0x01),
-	SMART_CMD(0x05),
-	SMART_DAT(0x00),
-	SMART_DAT(0x15),
-	SMART_CMD(0x01),
-	SMART_CMD(0x00),
-	SMART_DAT(0xC0),
-	SMART_DAT(0x10),
-	SMART_DELAY(30),
-
-	/* DISP ON */
-	SMART_CMD(0x01),
-	SMART_CMD(0x01),
-	SMART_DAT(0x00),
-	SMART_DAT(0x01),
-	SMART_CMD(0x01),
-	SMART_CMD(0x00),
-	SMART_DAT(0xFF),
-	SMART_DAT(0xFE),
-	SMART_DELAY(150),
-};
-
-static uint16_t panel_off[] = {
-	SMART_CMD(0x00),
-	SMART_CMD(0x1E),
-	SMART_DAT(0x00),
-	SMART_DAT(0x0A),
-	SMART_CMD(0x01),
-	SMART_CMD(0x00),
-	SMART_DAT(0xFF),
-	SMART_DAT(0xEE),
-	SMART_CMD(0x01),
-	SMART_CMD(0x00),
-	SMART_DAT(0xF8),
-	SMART_DAT(0x12),
-	SMART_CMD(0x01),
-	SMART_CMD(0x00),
-	SMART_DAT(0xE8),
-	SMART_DAT(0x11),
-	SMART_CMD(0x01),
-	SMART_CMD(0x00),
-	SMART_DAT(0xC0),
-	SMART_DAT(0x11),
-	SMART_CMD(0x01),
-	SMART_CMD(0x00),
-	SMART_DAT(0x40),
-	SMART_DAT(0x11),
-	SMART_CMD(0x01),
-	SMART_CMD(0x00),
-	SMART_DAT(0x00),
-	SMART_DAT(0x10),
-};
-
-static uint16_t update_framedata[] = {
-	/* write ram */
-	SMART_CMD(0x02),
-	SMART_CMD(0x02),
-
-	/* write frame data */
-	SMART_CMD_WRITE_FRAME,
-};
-
-static void ltm020d550_lcd_power(int on, struct fb_var_screeninfo *var)
-{
-	struct fb_info *info = container_of(var, struct fb_info, var);
-
-	if (on) {
-		pxafb_smart_queue(info, ARRAY_AND_SIZE(panel_init));
-		pxafb_smart_queue(info, ARRAY_AND_SIZE(panel_on));
-	} else {
-		pxafb_smart_queue(info, ARRAY_AND_SIZE(panel_off));
-	}
-
-	if (pxafb_smart_flush(info))
-		pr_err("%s: timed out\n", __func__);
-}
-
-static void ltm020d550_update(struct fb_info *info)
-{
-	pxafb_smart_queue(info, ARRAY_AND_SIZE(update_framedata));
-	pxafb_smart_flush(info);
-}
-
-static struct pxafb_mode_info toshiba_ltm020d550_modes[] = {
-	[0] = {
-		.xres			= 240,
-		.yres			= 320,
-		.bpp			= 16,
-		.a0csrd_set_hld		= 30,
-		.a0cswr_set_hld		= 30,
-		.wr_pulse_width		= 30,
-		.rd_pulse_width 	= 170,
-		.op_hold_time 		= 30,
-		.cmd_inh_time		= 60,
-
-		/* L_LCLK_A0 and L_LCLK_RD active low */
-		.sync			= FB_SYNC_HOR_HIGH_ACT |
-					  FB_SYNC_VERT_HIGH_ACT,
-	},
-};
-
-static struct pxafb_mach_info tavorevb_lcd_info = {
-	.modes			= toshiba_ltm020d550_modes,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_SMART_PANEL_8BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_lcd_power	= ltm020d550_lcd_power,
-	.smart_update		= ltm020d550_update,
-};
-
-static void __init tavorevb_init_lcd(void)
-{
-	pwm_add_table(tavorevb_pwm_lookup, ARRAY_SIZE(tavorevb_pwm_lookup));
-	platform_device_register(&tavorevb_backlight_devices[0]);
-	platform_device_register(&tavorevb_backlight_devices[1]);
-	pxa_set_fb_info(NULL, &tavorevb_lcd_info);
-}
-#else
-static inline void tavorevb_init_lcd(void) {}
-#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
-
-static void __init tavorevb_init(void)
-{
-	/* initialize MFP configurations */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(tavorevb_mfp_cfg));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	platform_device_register(&smc91x_device);
-
-	tavorevb_init_lcd();
-	tavorevb_init_keypad();
-}
-
-MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
-	/* Maintainer: Eric Miao <eric.miao@marvell.com> */
-	.atag_offset    = 0x100,
-	.map_io         = pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq       = pxa3xx_init_irq,
-	.handle_irq       = pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine   = tavorevb_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c
deleted file mode 100644
index c9541632b8b1..000000000000
--- a/arch/arm/mach-pxa/tosa-bt.c
+++ /dev/null
@@ -1,134 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Bluetooth built-in chip control
- *
- * Copyright (c) 2008 Dmitry Baryshkov
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/rfkill.h>
-
-#include "tosa_bt.h"
-
-static void tosa_bt_on(struct tosa_bt_data *data)
-{
-	gpio_set_value(data->gpio_reset, 0);
-	gpio_set_value(data->gpio_pwr, 1);
-	gpio_set_value(data->gpio_reset, 1);
-	mdelay(20);
-	gpio_set_value(data->gpio_reset, 0);
-}
-
-static void tosa_bt_off(struct tosa_bt_data *data)
-{
-	gpio_set_value(data->gpio_reset, 1);
-	mdelay(10);
-	gpio_set_value(data->gpio_pwr, 0);
-	gpio_set_value(data->gpio_reset, 0);
-}
-
-static int tosa_bt_set_block(void *data, bool blocked)
-{
-	pr_info("BT_RADIO going: %s\n", blocked ? "off" : "on");
-
-	if (!blocked) {
-		pr_info("TOSA_BT: going ON\n");
-		tosa_bt_on(data);
-	} else {
-		pr_info("TOSA_BT: going OFF\n");
-		tosa_bt_off(data);
-	}
-
-	return 0;
-}
-
-static const struct rfkill_ops tosa_bt_rfkill_ops = {
-	.set_block = tosa_bt_set_block,
-};
-
-static int tosa_bt_probe(struct platform_device *dev)
-{
-	int rc;
-	struct rfkill *rfk;
-
-	struct tosa_bt_data *data = dev->dev.platform_data;
-
-	rc = gpio_request(data->gpio_reset, "Bluetooth reset");
-	if (rc)
-		goto err_reset;
-	rc = gpio_direction_output(data->gpio_reset, 0);
-	if (rc)
-		goto err_reset_dir;
-	rc = gpio_request(data->gpio_pwr, "Bluetooth power");
-	if (rc)
-		goto err_pwr;
-	rc = gpio_direction_output(data->gpio_pwr, 0);
-	if (rc)
-		goto err_pwr_dir;
-
-	rfk = rfkill_alloc("tosa-bt", &dev->dev, RFKILL_TYPE_BLUETOOTH,
-			   &tosa_bt_rfkill_ops, data);
-	if (!rfk) {
-		rc = -ENOMEM;
-		goto err_rfk_alloc;
-	}
-
-	rc = rfkill_register(rfk);
-	if (rc)
-		goto err_rfkill;
-
-	platform_set_drvdata(dev, rfk);
-
-	return 0;
-
-err_rfkill:
-	rfkill_destroy(rfk);
-err_rfk_alloc:
-	tosa_bt_off(data);
-err_pwr_dir:
-	gpio_free(data->gpio_pwr);
-err_pwr:
-err_reset_dir:
-	gpio_free(data->gpio_reset);
-err_reset:
-	return rc;
-}
-
-static int tosa_bt_remove(struct platform_device *dev)
-{
-	struct tosa_bt_data *data = dev->dev.platform_data;
-	struct rfkill *rfk = platform_get_drvdata(dev);
-
-	platform_set_drvdata(dev, NULL);
-
-	if (rfk) {
-		rfkill_unregister(rfk);
-		rfkill_destroy(rfk);
-	}
-	rfk = NULL;
-
-	tosa_bt_off(data);
-
-	gpio_free(data->gpio_pwr);
-	gpio_free(data->gpio_reset);
-
-	return 0;
-}
-
-static struct platform_driver tosa_bt_driver = {
-	.probe = tosa_bt_probe,
-	.remove = tosa_bt_remove,
-
-	.driver = {
-		.name = "tosa-bt",
-	},
-};
-module_platform_driver(tosa_bt_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Dmitry Baryshkov");
-MODULE_DESCRIPTION("Bluetooth built-in chip control");
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
deleted file mode 100644
index d41641d6cfcd..000000000000
--- a/arch/arm/mach-pxa/tosa.c
+++ /dev/null
@@ -1,946 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Support for Sharp SL-C6000x PDAs
- *  Model: (Tosa)
- *
- *  Copyright (c) 2005 Dirk Opfer
- *
- *	Based on code written by Sharp/Lineo for 2.4 kernels
- */
-
-#include <linux/clkdev.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/mmc/host.h>
-#include <linux/mfd/tc6393xb.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/pm.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/power/gpio-charger.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/reboot.h>
-#include <linux/memblock.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include "pxa25x.h"
-#include "reset.h"
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include "udc.h"
-#include "tosa_bt.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include "smemc.h"
-
-#include <asm/mach/arch.h>
-#include "tosa.h"
-
-#include <asm/hardware/scoop.h>
-#include <asm/mach/sharpsl_param.h>
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned long tosa_pin_config[] = {
-	GPIO78_nCS_2, /* Scoop */
-	GPIO80_nCS_4, /* tg6393xb */
-	GPIO33_nCS_5, /* Scoop */
-
-	// GPIO76 CARD_VCC_ON1
-
-	GPIO19_GPIO, /* Reset out */
-	GPIO1_RST | WAKEUP_ON_EDGE_FALL,
-
-	GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* WAKE_UP */
-	GPIO2_GPIO | WAKEUP_ON_EDGE_BOTH, /* AC_IN */
-	GPIO3_GPIO | WAKEUP_ON_EDGE_FALL, /* RECORD */
-	GPIO4_GPIO | WAKEUP_ON_EDGE_FALL, /* SYNC */
-	GPIO20_GPIO, /* EAR_IN */
-	GPIO22_GPIO, /* On */
-
-	GPIO5_GPIO, /* USB_IN */
-	GPIO32_GPIO, /* Pen IRQ */
-
-	GPIO7_GPIO, /* Jacket Detect */
-	GPIO14_GPIO, /* BAT0_CRG */
-	GPIO12_GPIO, /* BAT1_CRG */
-	GPIO17_GPIO, /* BAT0_LOW */
-	GPIO84_GPIO, /* BAT1_LOW */
-	GPIO38_GPIO, /* BAT_LOCK */
-
-	GPIO11_3_6MHz,
-	GPIO15_GPIO, /* TC6393XB IRQ */
-	GPIO18_RDY,
-	GPIO27_GPIO, /* LCD Sync */
-
-	/* MMC */
-	GPIO6_MMC_CLK,
-	GPIO8_MMC_CS0,
-	GPIO9_GPIO, /* Detect */
-	GPIO10_GPIO, /* nSD_INT */
-
-	/* CF */
-	GPIO13_GPIO, /* CD_IRQ */
-	GPIO21_GPIO, /* Main Slot IRQ */
-	GPIO36_GPIO, /* Jacket Slot IRQ */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-
-	/* AC97 */
-	GPIO31_AC97_SYNC,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	// GPIO79 nAUD_IRQ
-
-	/* FFUART */
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-	GPIO37_FFUART_DSR,
-	GPIO39_FFUART_TXD,
-	GPIO40_FFUART_DTR,
-	GPIO41_FFUART_RTS,
-
-	/* BTUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* Keybd */
-	GPIO58_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 0 */
-	GPIO59_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 1 */
-	GPIO60_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 2 */
-	GPIO61_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 3 */
-	GPIO62_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 4 */
-	GPIO63_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 5 */
-	GPIO64_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 6 */
-	GPIO65_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 7 */
-	GPIO66_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 8 */
-	GPIO67_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 9 */
-	GPIO68_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 10 */
-	GPIO69_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 0 */
-	GPIO70_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 1 */
-	GPIO71_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 2 */
-	GPIO72_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 3 */
-	GPIO73_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 4 */
-	GPIO74_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 5 */
-	GPIO75_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 6 */
-
-	/* SPI */
-	GPIO81_SSP2_CLK_OUT,
-	GPIO82_SSP2_FRM_OUT,
-	GPIO83_SSP2_TXD,
-
-	/* IrDA is managed in other way */
-	GPIO46_GPIO,
-	GPIO47_GPIO,
-};
-
-/*
- * SCOOP Device
- */
-static struct resource tosa_scoop_resources[] = {
-	[0] = {
-		.start	= TOSA_CF_PHYS,
-		.end	= TOSA_CF_PHYS + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct scoop_config tosa_scoop_setup = {
-	.io_dir 	= TOSA_SCOOP_IO_DIR,
-	.gpio_base	= TOSA_SCOOP_GPIO_BASE,
-};
-
-static struct platform_device tosascoop_device = {
-	.name		= "sharp-scoop",
-	.id		= 0,
-	.dev		= {
- 		.platform_data	= &tosa_scoop_setup,
-	},
-	.num_resources	= ARRAY_SIZE(tosa_scoop_resources),
-	.resource	= tosa_scoop_resources,
-};
-
-
-/*
- * SCOOP Device Jacket
- */
-static struct resource tosa_scoop_jc_resources[] = {
-	[0] = {
-		.start		= TOSA_SCOOP_PHYS + 0x40,
-		.end		= TOSA_SCOOP_PHYS + 0xfff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct scoop_config tosa_scoop_jc_setup = {
-	.io_dir 	= TOSA_SCOOP_JC_IO_DIR,
-	.gpio_base	= TOSA_SCOOP_JC_GPIO_BASE,
-};
-
-static struct platform_device tosascoop_jc_device = {
-	.name		= "sharp-scoop",
-	.id		= 1,
-	.dev		= {
- 		.platform_data	= &tosa_scoop_jc_setup,
-		.parent 	= &tosascoop_device.dev,
-	},
-	.num_resources	= ARRAY_SIZE(tosa_scoop_jc_resources),
-	.resource	= tosa_scoop_jc_resources,
-};
-
-/*
- * PCMCIA
- */
-static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = {
-{
-	.dev        = &tosascoop_device.dev,
-	.irq        = TOSA_IRQ_GPIO_CF_IRQ,
-	.cd_irq     = TOSA_IRQ_GPIO_CF_CD,
-	.cd_irq_str = "PCMCIA0 CD",
-},{
-	.dev        = &tosascoop_jc_device.dev,
-	.irq        = TOSA_IRQ_GPIO_JC_CF_IRQ,
-	.cd_irq     = -1,
-},
-};
-
-static struct scoop_pcmcia_config tosa_pcmcia_config = {
-	.devs         = &tosa_pcmcia_scoop[0],
-	.num_devs     = 2,
-};
-
-/*
- * USB Device Controller
- */
-static struct gpiod_lookup_table tosa_udc_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_USB_IN,
-			    "vbus", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_USB_PULLUP,
-			    "pullup", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device tosa_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-};
-
-/*
- * MMC/SD Device
- */
-static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void *data)
-{
-	int err;
-
-	err = gpio_request(TOSA_GPIO_nSD_INT, "SD Int");
-	if (err) {
-		printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
-		goto err_gpio_int;
-	}
-	err = gpio_direction_input(TOSA_GPIO_nSD_INT);
-	if (err)
-		goto err_gpio_int_dir;
-
-	return 0;
-
-err_gpio_int_dir:
-	gpio_free(TOSA_GPIO_nSD_INT);
-err_gpio_int:
-	return err;
-}
-
-static void tosa_mci_exit(struct device *dev, void *data)
-{
-	gpio_free(TOSA_GPIO_nSD_INT);
-}
-
-static struct pxamci_platform_data tosa_mci_platform_data = {
-	.detect_delay_ms	= 250,
-	.ocr_mask       	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init           	= tosa_mci_init,
-	.exit           	= tosa_mci_exit,
-};
-
-static struct gpiod_lookup_table tosa_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_nSD_DETECT,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("sharp-scoop.0", TOSA_GPIO_SD_WP - TOSA_SCOOP_GPIO_BASE,
-			    "wp", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("sharp-scoop.0", TOSA_GPIO_PWR_ON - TOSA_SCOOP_GPIO_BASE,
-			    "power", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/*
- * Irda
- */
-static void tosa_irda_transceiver_mode(struct device *dev, int mode)
-{
-	if (mode & IR_OFF) {
-		gpio_set_value(TOSA_GPIO_IR_POWERDWN, 0);
-		pxa2xx_transceiver_mode(dev, mode);
-		gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
-	} else {
-		pxa2xx_transceiver_mode(dev, mode);
-		gpio_set_value(TOSA_GPIO_IR_POWERDWN, 1);
-	}
-}
-
-static int tosa_irda_startup(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(TOSA_GPIO_IRDA_TX, "IrDA TX");
-	if (ret)
-		goto err_tx;
-	ret = gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
-	if (ret)
-		goto err_tx_dir;
-
-	ret = gpio_request(TOSA_GPIO_IR_POWERDWN, "IrDA powerdown");
-	if (ret)
-		goto err_pwr;
-
-	ret = gpio_direction_output(TOSA_GPIO_IR_POWERDWN, 0);
-	if (ret)
-		goto err_pwr_dir;
-
-	tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
-
-	return 0;
-
-err_pwr_dir:
-	gpio_free(TOSA_GPIO_IR_POWERDWN);
-err_pwr:
-err_tx_dir:
-	gpio_free(TOSA_GPIO_IRDA_TX);
-err_tx:
-	return ret;
-}
-
-static void tosa_irda_shutdown(struct device *dev)
-{
-	tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
-	gpio_free(TOSA_GPIO_IR_POWERDWN);
-	gpio_free(TOSA_GPIO_IRDA_TX);
-}
-
-static struct pxaficp_platform_data tosa_ficp_platform_data = {
-	.gpio_pwdown		= -1,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-	.transceiver_mode	= tosa_irda_transceiver_mode,
-	.startup		= tosa_irda_startup,
-	.shutdown		= tosa_irda_shutdown,
-};
-
-/*
- * Tosa AC IN
- */
-static struct gpiod_lookup_table tosa_power_gpiod_table = {
-	.dev_id = "gpio-charger",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_AC_IN,
-			    NULL, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static char *tosa_ac_supplied_to[] = {
-	"main-battery",
-	"backup-battery",
-	"jacket-battery",
-};
-
-static struct gpio_charger_platform_data tosa_power_data = {
-	.name			= "charger",
-	.type			= POWER_SUPPLY_TYPE_MAINS,
-	.supplied_to		= tosa_ac_supplied_to,
-	.num_supplicants	= ARRAY_SIZE(tosa_ac_supplied_to),
-};
-
-static struct resource tosa_power_resource[] = {
-	{
-		.name		= "ac",
-		.start		= PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN),
-		.end		= PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN),
-		.flags		= IORESOURCE_IRQ |
-				  IORESOURCE_IRQ_HIGHEDGE |
-				  IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct platform_device tosa_power_device = {
-	.name			= "gpio-charger",
-	.id			= -1,
-	.dev.platform_data	= &tosa_power_data,
-	.resource		= tosa_power_resource,
-	.num_resources		= ARRAY_SIZE(tosa_power_resource),
-};
-
-/*
- * Tosa Keyboard
- */
-static const uint32_t tosakbd_keymap[] = {
-	KEY(0, 1, KEY_W),
-	KEY(0, 5, KEY_K),
-	KEY(0, 6, KEY_BACKSPACE),
-	KEY(0, 7, KEY_P),
-	KEY(1, 0, KEY_Q),
-	KEY(1, 1, KEY_E),
-	KEY(1, 2, KEY_T),
-	KEY(1, 3, KEY_Y),
-	KEY(1, 5, KEY_O),
-	KEY(1, 6, KEY_I),
-	KEY(1, 7, KEY_COMMA),
-	KEY(2, 0, KEY_A),
-	KEY(2, 1, KEY_D),
-	KEY(2, 2, KEY_G),
-	KEY(2, 3, KEY_U),
-	KEY(2, 5, KEY_L),
-	KEY(2, 6, KEY_ENTER),
-	KEY(2, 7, KEY_DOT),
-	KEY(3, 0, KEY_Z),
-	KEY(3, 1, KEY_C),
-	KEY(3, 2, KEY_V),
-	KEY(3, 3, KEY_J),
-	KEY(3, 4, TOSA_KEY_ADDRESSBOOK),
-	KEY(3, 5, TOSA_KEY_CANCEL),
-	KEY(3, 6, TOSA_KEY_CENTER),
-	KEY(3, 7, TOSA_KEY_OK),
-	KEY(3, 8, KEY_LEFTSHIFT),
-	KEY(4, 0, KEY_S),
-	KEY(4, 1, KEY_R),
-	KEY(4, 2, KEY_B),
-	KEY(4, 3, KEY_N),
-	KEY(4, 4, TOSA_KEY_CALENDAR),
-	KEY(4, 5, TOSA_KEY_HOMEPAGE),
-	KEY(4, 6, KEY_LEFTCTRL),
-	KEY(4, 7, TOSA_KEY_LIGHT),
-	KEY(4, 9, KEY_RIGHTSHIFT),
-	KEY(5, 0, KEY_TAB),
-	KEY(5, 1, KEY_SLASH),
-	KEY(5, 2, KEY_H),
-	KEY(5, 3, KEY_M),
-	KEY(5, 4, TOSA_KEY_MENU),
-	KEY(5, 6, KEY_UP),
-	KEY(5, 10, TOSA_KEY_FN),
-	KEY(6, 0, KEY_X),
-	KEY(6, 1, KEY_F),
-	KEY(6, 2, KEY_SPACE),
-	KEY(6, 3, KEY_APOSTROPHE),
-	KEY(6, 4, TOSA_KEY_MAIL),
-	KEY(6, 5, KEY_LEFT),
-	KEY(6, 6, KEY_DOWN),
-	KEY(6, 7, KEY_RIGHT),
-};
-
-static struct matrix_keymap_data tosakbd_keymap_data = {
-	.keymap		= tosakbd_keymap,
-	.keymap_size	= ARRAY_SIZE(tosakbd_keymap),
-};
-
-static const int tosakbd_col_gpios[] =
-			{ 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68 };
-static const int tosakbd_row_gpios[] =
-			{ 69, 70, 71, 72, 73, 74, 75 };
-
-static struct matrix_keypad_platform_data tosakbd_pdata = {
-	.keymap_data		= &tosakbd_keymap_data,
-	.row_gpios		= tosakbd_row_gpios,
-	.col_gpios		= tosakbd_col_gpios,
-	.num_row_gpios		= ARRAY_SIZE(tosakbd_row_gpios),
-	.num_col_gpios		= ARRAY_SIZE(tosakbd_col_gpios),
-	.col_scan_delay_us	= 10,
-	.debounce_ms		= 10,
-	.wakeup			= 1,
-};
-
-static struct platform_device tosakbd_device = {
-	.name		= "matrix-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &tosakbd_pdata,
-	},
-};
-
-static struct gpio_keys_button tosa_gpio_keys[] = {
-	/*
-	 * Two following keys are directly tied to "ON" button of tosa. Why?
-	 * The first one can be used as a wakeup source, the second can't;
-	 * also the first one is OR of ac_powered and on_button.
-	 */
-	{
-		.type	= EV_PWR,
-		.code	= KEY_RESERVED,
-		.gpio	= TOSA_GPIO_POWERON,
-		.desc	= "Poweron",
-		.wakeup	= 1,
-		.active_low = 1,
-	},
-	{
-		.type	= EV_PWR,
-		.code	= KEY_SUSPEND,
-		.gpio	= TOSA_GPIO_ON_KEY,
-		.desc	= "On key",
-		/*
-		 * can't be used as wakeup
-		 * .wakeup	= 1,
-		 */
-		.active_low = 1,
-	},
-	{
-		.type	= EV_KEY,
-		.code	= TOSA_KEY_RECORD,
-		.gpio	= TOSA_GPIO_RECORD_BTN,
-		.desc	= "Record Button",
-		.wakeup	= 1,
-		.active_low = 1,
-	},
-	{
-		.type	= EV_KEY,
-		.code	= TOSA_KEY_SYNC,
-		.gpio	= TOSA_GPIO_SYNC,
-		.desc	= "Sync Button",
-		.wakeup	= 1,
-		.active_low = 1,
-	},
-	{
-		.type	= EV_SW,
-		.code	= SW_HEADPHONE_INSERT,
-		.gpio	= TOSA_GPIO_EAR_IN,
-		.desc	= "HeadPhone insert",
-		.active_low = 1,
-		.debounce_interval = 300,
-	},
-};
-
-static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = {
-	.buttons	= tosa_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(tosa_gpio_keys),
-};
-
-static struct platform_device tosa_gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &tosa_gpio_keys_platform_data,
-	},
-};
-
-/*
- * Tosa LEDs
- */
-static struct gpio_led tosa_gpio_leds[] = {
-	{
-		.name			= "tosa:amber:charge",
-		.default_trigger	= "main-battery-charging",
-		.gpio			= TOSA_GPIO_CHRG_ERR_LED,
-	},
-	{
-		.name			= "tosa:green:mail",
-		.default_trigger	= "nand-disk",
-		.gpio			= TOSA_GPIO_NOTE_LED,
-	},
-	{
-		.name			= "tosa:dual:wlan",
-		.default_trigger	= "none",
-		.gpio			= TOSA_GPIO_WLAN_LED,
-	},
-	{
-		.name			= "tosa:blue:bluetooth",
-		.default_trigger	= "tosa-bt",
-		.gpio			= TOSA_GPIO_BT_LED,
-	},
-};
-
-static struct gpio_led_platform_data tosa_gpio_leds_platform_data = {
-	.leds		= tosa_gpio_leds,
-	.num_leds	= ARRAY_SIZE(tosa_gpio_leds),
-};
-
-static struct platform_device tosaled_device = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &tosa_gpio_leds_platform_data,
-	},
-};
-
-/*
- * Toshiba Mobile IO Controller
- */
-static struct resource tc6393xb_resources[] = {
-	[0] = {
-		.start	= TOSA_LCDC_PHYS,
-		.end	= TOSA_LCDC_PHYS + 0x3ffffff,
-		.flags	= IORESOURCE_MEM,
-	},
-
-	[1] = {
-		.start	= TOSA_IRQ_GPIO_TC6393XB_INT,
-		.end	= TOSA_IRQ_GPIO_TC6393XB_INT,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct gpiod_lookup_table tosa_battery_gpio_table = {
-	.dev_id = "wm97xx-battery",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_BAT0_CRG,
-			    "main battery full", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_BAT1_CRG,
-			    "jacket battery full", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_BAT0_LOW,
-			    "main battery low", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_BAT1_LOW,
-			    "jacket battery low", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_JACKET_DETECT,
-			    "jacket detect", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static int tosa_tc6393xb_enable(struct platform_device *dev)
-{
-	int rc;
-
-	rc = gpio_request(TOSA_GPIO_TC6393XB_REST_IN, "tc6393xb #pclr");
-	if (rc)
-		goto err_req_pclr;
-	rc = gpio_request(TOSA_GPIO_TC6393XB_SUSPEND, "tc6393xb #suspend");
-	if (rc)
-		goto err_req_suspend;
-	rc = gpio_request(TOSA_GPIO_TC6393XB_L3V_ON, "tc6393xb l3v");
-	if (rc)
-		goto err_req_l3v;
-	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_L3V_ON, 0);
-	if (rc)
-		goto err_dir_l3v;
-	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_SUSPEND, 0);
-	if (rc)
-		goto err_dir_suspend;
-	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_REST_IN, 0);
-	if (rc)
-		goto err_dir_pclr;
-
-	mdelay(1);
-
-	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
-
-	mdelay(10);
-
-	gpio_set_value(TOSA_GPIO_TC6393XB_REST_IN, 1);
-	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
-
-	return 0;
-err_dir_pclr:
-err_dir_suspend:
-err_dir_l3v:
-	gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
-err_req_l3v:
-	gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
-err_req_suspend:
-	gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
-err_req_pclr:
-	return rc;
-}
-
-static void tosa_tc6393xb_disable(struct platform_device *dev)
-{
-	gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
-	gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
-	gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
-}
-
-static int tosa_tc6393xb_resume(struct platform_device *dev)
-{
-	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
-	mdelay(10);
-	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
-	mdelay(10);
-
-	return 0;
-}
-
-static int tosa_tc6393xb_suspend(struct platform_device *dev)
-{
-	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 0);
-	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 0);
-	return 0;
-}
-
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr tosa_tc6393xb_nand_bbt = {
-	.options	= 0,
-	.offs		= 4,
-	.len		= 2,
-	.pattern	= scan_ff_pattern
-};
-
-static const char * const probes[] = {
-	"cmdlinepart",
-	"ofpart",
-	"sharpslpart",
-	NULL,
-};
-
-static struct tmio_nand_data tosa_tc6393xb_nand_config = {
-	.badblock_pattern = &tosa_tc6393xb_nand_bbt,
-	.part_parsers = probes,
-};
-
-#ifdef CONFIG_MFD_TC6393XB
-static struct fb_videomode tosa_tc6393xb_lcd_mode[] = {
-	{
-		.xres = 480,
-		.yres = 640,
-		.pixclock = 0x002cdf00,/* PLL divisor */
-		.left_margin = 0x004c,
-		.right_margin = 0x005b,
-		.upper_margin = 0x0001,
-		.lower_margin = 0x000d,
-		.hsync_len = 0x0002,
-		.vsync_len = 0x0001,
-		.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-		.vmode = FB_VMODE_NONINTERLACED,
-	},{
-		.xres = 240,
-		.yres = 320,
-		.pixclock = 0x00e7f203,/* PLL divisor */
-		.left_margin = 0x0024,
-		.right_margin = 0x002f,
-		.upper_margin = 0x0001,
-		.lower_margin = 0x000d,
-		.hsync_len = 0x0002,
-		.vsync_len = 0x0001,
-		.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-		.vmode = FB_VMODE_NONINTERLACED,
-	}
-};
-
-static struct tmio_fb_data tosa_tc6393xb_fb_config = {
-	.lcd_set_power	= tc6393xb_lcd_set_power,
-	.lcd_mode	= tc6393xb_lcd_mode,
-	.num_modes	= ARRAY_SIZE(tosa_tc6393xb_lcd_mode),
-	.modes		= &tosa_tc6393xb_lcd_mode[0],
-	.height		= 82,
-	.width		= 60,
-};
-#endif
-
-static struct tc6393xb_platform_data tosa_tc6393xb_data = {
-	.scr_pll2cr	= 0x0cc1,
-	.scr_gper	= 0x3300,
-
-	.irq_base	= IRQ_BOARD_START,
-
-	.enable		= tosa_tc6393xb_enable,
-	.disable	= tosa_tc6393xb_disable,
-	.suspend	= tosa_tc6393xb_suspend,
-	.resume		= tosa_tc6393xb_resume,
-
-	.nand_data	= &tosa_tc6393xb_nand_config,
-#ifdef CONFIG_MFD_TC6393XB
-	.fb_data	= &tosa_tc6393xb_fb_config,
-#endif
-
-	.resume_restore = 1,
-};
-
-
-static struct platform_device tc6393xb_device = {
-	.name	= "tc6393xb",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &tosa_tc6393xb_data,
-	},
-	.num_resources	= ARRAY_SIZE(tc6393xb_resources),
-	.resource	= tc6393xb_resources,
-};
-
-static struct tosa_bt_data tosa_bt_data = {
-	.gpio_pwr	= TOSA_GPIO_BT_PWR_EN,
-	.gpio_reset	= TOSA_GPIO_BT_RESET,
-};
-
-static struct platform_device tosa_bt_device = {
-	.name	= "tosa-bt",
-	.id	= -1,
-	.dev.platform_data = &tosa_bt_data,
-};
-
-static struct pxa2xx_spi_controller pxa_ssp_master_info = {
-	.num_chipselect	= 1,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-	{
-		.modalias	= "tosa-lcd",
-		// .platform_data
-		.max_speed_hz	= 28750,
-		.bus_num	= 2,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_0,
-	},
-};
-
-static struct mtd_partition sharpsl_rom_parts[] = {
-	{
-		.name	="Boot PROM Filesystem",
-		.offset	= 0x00160000,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data sharpsl_rom_data = {
-	.width		= 2,
-	.nr_parts	= ARRAY_SIZE(sharpsl_rom_parts),
-	.parts		= sharpsl_rom_parts,
-};
-
-static struct resource sharpsl_rom_resources[] = {
-	{
-		.start	= 0x00000000,
-		.end	= 0x007fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device sharpsl_rom_device = {
-	.name	= "physmap-flash",
-	.id	= -1,
-	.resource = sharpsl_rom_resources,
-	.num_resources = ARRAY_SIZE(sharpsl_rom_resources),
-	.dev.platform_data = &sharpsl_rom_data,
-};
-
-static struct platform_device wm9712_device = {
-	.name	= "wm9712-codec",
-	.id	= -1,
-};
-
-static struct platform_device tosa_audio_device = {
-	.name	= "tosa-audio",
-	.id	= -1,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&tosascoop_device,
-	&tosascoop_jc_device,
-	&tc6393xb_device,
-	&tosa_power_device,
-	&tosakbd_device,
-	&tosa_gpio_keys_device,
-	&tosaled_device,
-	&tosa_bt_device,
-	&sharpsl_rom_device,
-	&wm9712_device,
-	&tosa_gpio_vbus,
-	&tosa_audio_device,
-};
-
-static void tosa_poweroff(void)
-{
-	pxa_restart(REBOOT_GPIO, NULL);
-}
-
-static void tosa_restart(enum reboot_mode mode, const char *cmd)
-{
-	uint32_t msc0 = __raw_readl(MSC0);
-
-	/* Bootloader magic for a reboot */
-	if((msc0 & 0xffff0000) == 0x7ff00000)
-		__raw_writel((msc0 & 0xffff) | 0x7ee00000, MSC0);
-
-	tosa_poweroff();
-}
-
-static void __init tosa_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	gpio_set_wake(MFP_PIN_GPIO1, 1);
-	/* We can't pass to gpio-keys since it will drop the Reset altfunc */
-
-	init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0);
-
-	pm_power_off = tosa_poweroff;
-
-	PCFR |= PCFR_OPDE;
-
-	/* enable batt_fault */
-	PMCR = 0x01;
-
-	gpiod_add_lookup_table(&tosa_battery_gpio_table);
-
-	gpiod_add_lookup_table(&tosa_mci_gpio_table);
-	pxa_set_mci_info(&tosa_mci_platform_data);
-	pxa_set_ficp_info(&tosa_ficp_platform_data);
-	pxa_set_i2c_info(NULL);
-	pxa_set_ac97_info(NULL);
-	platform_scoop_config = &tosa_pcmcia_config;
-
-	pxa2xx_set_spi_info(2, &pxa_ssp_master_info);
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
-	clk_add_alias("CLK_CK3P6MI", tc6393xb_device.name, "GPIO11_CLK", NULL);
-
-	gpiod_add_lookup_table(&tosa_udc_gpiod_table);
-	gpiod_add_lookup_table(&tosa_power_gpiod_table);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init fixup_tosa(struct tag *tags, char **cmdline)
-{
-	sharpsl_save_param();
-	memblock_add(0xa0000000, SZ_64M);
-}
-
-MACHINE_START(TOSA, "SHARP Tosa")
-	.fixup          = fixup_tosa,
-	.map_io         = pxa25x_map_io,
-	.nr_irqs	= TOSA_NR_IRQS,
-	.init_irq       = pxa25x_init_irq,
-	.handle_irq       = pxa25x_handle_irq,
-	.init_machine   = tosa_init,
-	.init_time	= pxa_timer_init,
-	.restart	= tosa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/tosa.h b/arch/arm/mach-pxa/tosa.h
deleted file mode 100644
index 3b3efa0a0e22..000000000000
--- a/arch/arm/mach-pxa/tosa.h
+++ /dev/null
@@ -1,165 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Hardware specific definitions for Sharp SL-C6000x series of PDAs
- *
- * Copyright (c) 2005 Dirk Opfer
- *
- * Based on Sharp's 2.4 kernel patches
- */
-#ifndef _ASM_ARCH_TOSA_H_
-#define _ASM_ARCH_TOSA_H_ 1
-
-#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
-
-/*  TOSA Chip selects  */
-#define TOSA_LCDC_PHYS		PXA_CS4_PHYS
-/* Internel Scoop */
-#define TOSA_CF_PHYS		(PXA_CS2_PHYS + 0x00800000)
-/* Jacket Scoop */
-#define TOSA_SCOOP_PHYS  	(PXA_CS5_PHYS + 0x00800000)
-
-#define TOSA_NR_IRQS		(IRQ_BOARD_START + TC6393XB_NR_IRQS)
-/*
- * SCOOP2 internal GPIOs
- */
-#define TOSA_SCOOP_GPIO_BASE		PXA_NR_BUILTIN_GPIO
-#define TOSA_SCOOP_PXA_VCORE1		SCOOP_GPCR_PA11
-#define TOSA_GPIO_TC6393XB_REST_IN	(TOSA_SCOOP_GPIO_BASE + 1)
-#define TOSA_GPIO_IR_POWERDWN		(TOSA_SCOOP_GPIO_BASE + 2)
-#define TOSA_GPIO_SD_WP			(TOSA_SCOOP_GPIO_BASE + 3)
-#define TOSA_GPIO_PWR_ON		(TOSA_SCOOP_GPIO_BASE + 4)
-#define TOSA_SCOOP_AUD_PWR_ON		SCOOP_GPCR_PA16
-#define TOSA_GPIO_BT_RESET		(TOSA_SCOOP_GPIO_BASE + 6)
-#define TOSA_GPIO_BT_PWR_EN		(TOSA_SCOOP_GPIO_BASE + 7)
-#define TOSA_SCOOP_AC_IN_OL		SCOOP_GPCR_PA19
-
-/* GPIO Direction   1 : output mode / 0:input mode */
-#define TOSA_SCOOP_IO_DIR     (TOSA_SCOOP_PXA_VCORE1 | \
-		TOSA_SCOOP_AUD_PWR_ON)
-
-/*
- * SCOOP2 jacket GPIOs
- */
-#define TOSA_SCOOP_JC_GPIO_BASE		(PXA_NR_BUILTIN_GPIO + 12)
-#define TOSA_GPIO_BT_LED		(TOSA_SCOOP_JC_GPIO_BASE + 0)
-#define TOSA_GPIO_NOTE_LED		(TOSA_SCOOP_JC_GPIO_BASE + 1)
-#define TOSA_GPIO_CHRG_ERR_LED		(TOSA_SCOOP_JC_GPIO_BASE + 2)
-#define TOSA_GPIO_USB_PULLUP		(TOSA_SCOOP_JC_GPIO_BASE + 3)
-#define TOSA_GPIO_TC6393XB_SUSPEND	(TOSA_SCOOP_JC_GPIO_BASE + 4)
-#define TOSA_GPIO_TC6393XB_L3V_ON	(TOSA_SCOOP_JC_GPIO_BASE + 5)
-#define TOSA_SCOOP_JC_WLAN_DETECT	SCOOP_GPCR_PA17
-#define TOSA_GPIO_WLAN_LED		(TOSA_SCOOP_JC_GPIO_BASE + 7)
-#define TOSA_SCOOP_JC_CARD_LIMIT_SEL	SCOOP_GPCR_PA19
-
-/* GPIO Direction   1 : output mode / 0:input mode */
-#define TOSA_SCOOP_JC_IO_DIR (TOSA_SCOOP_JC_CARD_LIMIT_SEL)
-
-/*
- * PXA GPIOs
- */
-#define TOSA_GPIO_POWERON		(0)
-#define TOSA_GPIO_RESET			(1)
-#define TOSA_GPIO_AC_IN			(2)
-#define TOSA_GPIO_RECORD_BTN		(3)
-#define TOSA_GPIO_SYNC			(4)	/* Cradle SYNC Button */
-#define TOSA_GPIO_USB_IN		(5)
-#define TOSA_GPIO_JACKET_DETECT		(7)
-#define TOSA_GPIO_nSD_DETECT		(9)
-#define TOSA_GPIO_nSD_INT		(10)
-#define TOSA_GPIO_TC6393XB_CLK		(11)
-#define TOSA_GPIO_BAT1_CRG		(12)
-#define TOSA_GPIO_CF_CD			(13)
-#define TOSA_GPIO_BAT0_CRG		(14)
-#define TOSA_GPIO_TC6393XB_INT		(15)
-#define TOSA_GPIO_BAT0_LOW		(17)
-#define TOSA_GPIO_TC6393XB_RDY		(18)
-#define TOSA_GPIO_ON_RESET		(19)
-#define TOSA_GPIO_EAR_IN		(20)
-#define TOSA_GPIO_CF_IRQ		(21)	/* CF slot0 Ready */
-#define TOSA_GPIO_ON_KEY		(22)
-#define TOSA_GPIO_VGA_LINE		(27)
-#define TOSA_GPIO_TP_INT		(32)	/* Touch Panel pen down interrupt */
-#define TOSA_GPIO_JC_CF_IRQ		(36)	/* CF slot1 Ready */
-#define TOSA_GPIO_BAT_LOCKED		(38)	/* Battery locked */
-#define TOSA_GPIO_IRDA_TX		(47)
-#define TOSA_GPIO_TG_SPI_SCLK		(81)
-#define TOSA_GPIO_TG_SPI_CS		(82)
-#define TOSA_GPIO_TG_SPI_MOSI		(83)
-#define TOSA_GPIO_BAT1_LOW		(84)
-
-#define TOSA_GPIO_HP_IN			GPIO_EAR_IN
-
-#define TOSA_GPIO_MAIN_BAT_LOW		GPIO_BAT0_LOW
-
-#define TOSA_KEY_STROBE_NUM		(11)
-#define TOSA_KEY_SENSE_NUM		(7)
-
-#define TOSA_GPIO_HIGH_STROBE_BIT	(0xfc000000)
-#define TOSA_GPIO_LOW_STROBE_BIT	(0x0000001f)
-#define TOSA_GPIO_ALL_SENSE_BIT		(0x00000fe0)
-#define TOSA_GPIO_ALL_SENSE_RSHIFT	(5)
-#define TOSA_GPIO_STROBE_BIT(a)		GPIO_bit(58+(a))
-#define TOSA_GPIO_SENSE_BIT(a)		GPIO_bit(69+(a))
-#define TOSA_GAFR_HIGH_STROBE_BIT	(0xfff00000)
-#define TOSA_GAFR_LOW_STROBE_BIT	(0x000003ff)
-#define TOSA_GAFR_ALL_SENSE_BIT		(0x00fffc00)
-#define TOSA_GPIO_KEY_SENSE(a) 		(69+(a))
-#define TOSA_GPIO_KEY_STROBE(a)		(58+(a))
-
-/*
- * Interrupts
- */
-#define TOSA_IRQ_GPIO_WAKEUP        	PXA_GPIO_TO_IRQ(TOSA_GPIO_WAKEUP)
-#define TOSA_IRQ_GPIO_AC_IN         	PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN)
-#define TOSA_IRQ_GPIO_RECORD_BTN    	PXA_GPIO_TO_IRQ(TOSA_GPIO_RECORD_BTN)
-#define TOSA_IRQ_GPIO_SYNC          	PXA_GPIO_TO_IRQ(TOSA_GPIO_SYNC)
-#define TOSA_IRQ_GPIO_USB_IN        	PXA_GPIO_TO_IRQ(TOSA_GPIO_USB_IN)
-#define TOSA_IRQ_GPIO_JACKET_DETECT 	PXA_GPIO_TO_IRQ(TOSA_GPIO_JACKET_DETECT)
-#define TOSA_IRQ_GPIO_nSD_INT       	PXA_GPIO_TO_IRQ(TOSA_GPIO_nSD_INT)
-#define TOSA_IRQ_GPIO_nSD_DETECT    	PXA_GPIO_TO_IRQ(TOSA_GPIO_nSD_DETECT)
-#define TOSA_IRQ_GPIO_BAT1_CRG      	PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT1_CRG)
-#define TOSA_IRQ_GPIO_CF_CD         	PXA_GPIO_TO_IRQ(TOSA_GPIO_CF_CD)
-#define TOSA_IRQ_GPIO_BAT0_CRG      	PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT0_CRG)
-#define TOSA_IRQ_GPIO_TC6393XB_INT    	PXA_GPIO_TO_IRQ(TOSA_GPIO_TC6393XB_INT)
-#define TOSA_IRQ_GPIO_BAT0_LOW      	PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT0_LOW)
-#define TOSA_IRQ_GPIO_EAR_IN        	PXA_GPIO_TO_IRQ(TOSA_GPIO_EAR_IN)
-#define TOSA_IRQ_GPIO_CF_IRQ        	PXA_GPIO_TO_IRQ(TOSA_GPIO_CF_IRQ)
-#define TOSA_IRQ_GPIO_ON_KEY        	PXA_GPIO_TO_IRQ(TOSA_GPIO_ON_KEY)
-#define TOSA_IRQ_GPIO_VGA_LINE      	PXA_GPIO_TO_IRQ(TOSA_GPIO_VGA_LINE)
-#define TOSA_IRQ_GPIO_TP_INT        	PXA_GPIO_TO_IRQ(TOSA_GPIO_TP_INT)
-#define TOSA_IRQ_GPIO_JC_CF_IRQ     	PXA_GPIO_TO_IRQ(TOSA_GPIO_JC_CF_IRQ)
-#define TOSA_IRQ_GPIO_BAT_LOCKED    	PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT_LOCKED)
-#define TOSA_IRQ_GPIO_BAT1_LOW      	PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT1_LOW)
-#define TOSA_IRQ_GPIO_KEY_SENSE(a)  	PXA_GPIO_TO_IRQ(69+(a))
-
-#define TOSA_IRQ_GPIO_MAIN_BAT_LOW 	PXA_GPIO_TO_IRQ(TOSA_GPIO_MAIN_BAT_LOW)
-
-#define TOSA_KEY_SYNC		KEY_102ND /* ??? */
-
-#ifndef CONFIG_TOSA_USE_EXT_KEYCODES
-#define TOSA_KEY_RECORD		KEY_YEN
-#define TOSA_KEY_ADDRESSBOOK	KEY_KATAKANA
-#define TOSA_KEY_CANCEL		KEY_ESC
-#define TOSA_KEY_CENTER		KEY_HIRAGANA
-#define TOSA_KEY_OK		KEY_HENKAN
-#define TOSA_KEY_CALENDAR	KEY_KATAKANAHIRAGANA
-#define TOSA_KEY_HOMEPAGE	KEY_HANGEUL
-#define TOSA_KEY_LIGHT		KEY_MUHENKAN
-#define TOSA_KEY_MENU		KEY_HANJA
-#define TOSA_KEY_FN		KEY_RIGHTALT
-#define TOSA_KEY_MAIL		KEY_ZENKAKUHANKAKU
-#else
-#define TOSA_KEY_RECORD		KEY_RECORD
-#define TOSA_KEY_ADDRESSBOOK	KEY_ADDRESSBOOK
-#define TOSA_KEY_CANCEL		KEY_CANCEL
-#define TOSA_KEY_CENTER		KEY_SELECT /* ??? */
-#define TOSA_KEY_OK		KEY_OK
-#define TOSA_KEY_CALENDAR	KEY_CALENDAR
-#define TOSA_KEY_HOMEPAGE	KEY_HOMEPAGE
-#define TOSA_KEY_LIGHT		KEY_KBDILLUMTOGGLE
-#define TOSA_KEY_MENU		KEY_MENU
-#define TOSA_KEY_FN		KEY_FN
-#define TOSA_KEY_MAIL		KEY_MAIL
-#endif
-
-#endif /* _ASM_ARCH_TOSA_H_ */
diff --git a/arch/arm/mach-pxa/tosa_bt.h b/arch/arm/mach-pxa/tosa_bt.h
deleted file mode 100644
index 56acd5dabec4..000000000000
--- a/arch/arm/mach-pxa/tosa_bt.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Tosa bluetooth built-in chip control.
- *
- * Later it may be shared with some other platforms.
- *
- * Copyright (c) 2008 Dmitry Baryshkov
- */
-#ifndef TOSA_BT_H
-#define TOSA_BT_H
-
-struct tosa_bt_data {
-	int gpio_pwr;
-	int gpio_reset;
-};
-
-#endif
-
diff --git a/arch/arm/mach-pxa/trizeps4-pcmcia.c b/arch/arm/mach-pxa/trizeps4-pcmcia.c
deleted file mode 100644
index 25e363770565..000000000000
--- a/arch/arm/mach-pxa/trizeps4-pcmcia.c
+++ /dev/null
@@ -1,200 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa2xx_trizeps4.c
- *
- * TRIZEPS PCMCIA specific routines.
- *
- * Author:	Jürgen Schindele
- * Created:	20 02, 2006
- * Copyright:	Jürgen Schindele
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include "pxa2xx-regs.h"
-#include "trizeps4.h"
-
-#include <pcmcia/soc_common.h>
-
-extern void board_pcmcia_power(int power);
-
-static int trizeps_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	/* we dont have voltage/card/ready detection
-	 * so we dont need interrupts for it
-	 */
-	switch (skt->nr) {
-	case 0:
-		skt->stat[SOC_STAT_CD].gpio = GPIO_PCD;
-		skt->stat[SOC_STAT_CD].name = "cs0_cd";
-		skt->stat[SOC_STAT_RDY].gpio = GPIO_PRDY;
-		skt->stat[SOC_STAT_RDY].name = "cs0_rdy";
-		break;
-	default:
-		break;
-	}
-	/* release the reset of this card */
-	pr_debug("%s: sock %d irq %d\n", __func__, skt->nr, skt->socket.pci_irq);
-
-	return 0;
-}
-
-static unsigned long trizeps_pcmcia_status[2];
-
-static void trizeps_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-				struct pcmcia_state *state)
-{
-	unsigned short status = 0, change;
-	status = CFSR_readw();
-	change = (status ^ trizeps_pcmcia_status[skt->nr]) &
-				ConXS_CFSR_BVD_MASK;
-	if (change) {
-		trizeps_pcmcia_status[skt->nr] = status;
-		if (status & ConXS_CFSR_BVD1) {
-			/* enable_irq empty */
-		} else {
-			/* disable_irq empty */
-		}
-	}
-
-	switch (skt->nr) {
-	case 0:
-		/* just fill in fix states */
-		state->bvd1   = (status & ConXS_CFSR_BVD1) ? 1 : 0;
-		state->bvd2   = (status & ConXS_CFSR_BVD2) ? 1 : 0;
-		state->vs_3v  = (status & ConXS_CFSR_VS1) ? 0 : 1;
-		state->vs_Xv  = (status & ConXS_CFSR_VS2) ? 0 : 1;
-		break;
-
-#ifndef CONFIG_MACH_TRIZEPS_CONXS
-	/* on ConXS we only have one slot. Second is inactive */
-	case 1:
-		state->detect = 0;
-		state->ready  = 0;
-		state->bvd1   = 0;
-		state->bvd2   = 0;
-		state->vs_3v  = 0;
-		state->vs_Xv  = 0;
-		break;
-
-#endif
-	}
-}
-
-static int trizeps_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-				const socket_state_t *state)
-{
-	int ret = 0;
-	unsigned short power = 0;
-
-	/* we do nothing here just check a bit */
-	switch (state->Vcc) {
-	case 0:  power &= 0xfc; break;
-	case 33: power |= ConXS_BCR_S0_VCC_3V3; break;
-	case 50:
-		pr_err("%s(): Vcc 5V not supported in socket\n", __func__);
-		break;
-	default:
-		pr_err("%s(): bad Vcc %u\n", __func__, state->Vcc);
-		ret = -1;
-	}
-
-	switch (state->Vpp) {
-	case 0:  power &= 0xf3; break;
-	case 33: power |= ConXS_BCR_S0_VPP_3V3; break;
-	case 120:
-		pr_err("%s(): Vpp 12V not supported in socket\n", __func__);
-		break;
-	default:
-		if (state->Vpp != state->Vcc) {
-			pr_err("%s(): bad Vpp %u\n", __func__, state->Vpp);
-			ret = -1;
-		}
-	}
-
-	switch (skt->nr) {
-	case 0:			 /* we only have 3.3V */
-		board_pcmcia_power(power);
-		break;
-
-#ifndef CONFIG_MACH_TRIZEPS_CONXS
-	/* on ConXS we only have one slot. Second is inactive */
-	case 1:
-#endif
-	default:
-		break;
-	}
-
-	return ret;
-}
-
-static void trizeps_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
-{
-	/* default is on */
-	board_pcmcia_power(0x9);
-}
-
-static void trizeps_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
-{
-	board_pcmcia_power(0x0);
-}
-
-static struct pcmcia_low_level trizeps_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-	.hw_init		= trizeps_pcmcia_hw_init,
-	.socket_state		= trizeps_pcmcia_socket_state,
-	.configure_socket	= trizeps_pcmcia_configure_socket,
-	.socket_init		= trizeps_pcmcia_socket_init,
-	.socket_suspend		= trizeps_pcmcia_socket_suspend,
-#ifdef CONFIG_MACH_TRIZEPS_CONXS
-	.nr			= 1,
-#else
-	.nr			= 2,
-#endif
-	.first			= 0,
-};
-
-static struct platform_device *trizeps_pcmcia_device;
-
-static int __init trizeps_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_trizeps4() && !machine_is_trizeps4wl())
-		return -ENODEV;
-
-	trizeps_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!trizeps_pcmcia_device)
-		return -ENOMEM;
-
-	ret = platform_device_add_data(trizeps_pcmcia_device,
-			&trizeps_pcmcia_ops, sizeof(trizeps_pcmcia_ops));
-
-	if (ret == 0)
-		ret = platform_device_add(trizeps_pcmcia_device);
-
-	if (ret)
-		platform_device_put(trizeps_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit trizeps_pcmcia_exit(void)
-{
-	platform_device_unregister(trizeps_pcmcia_device);
-}
-
-fs_initcall(trizeps_pcmcia_init);
-module_exit(trizeps_pcmcia_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Juergen Schindele");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
deleted file mode 100644
index 716cce885379..000000000000
--- a/arch/arm/mach-pxa/trizeps4.c
+++ /dev/null
@@ -1,575 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/trizeps4.c
- *
- *  Support for the Keith und Koep Trizeps4 Module Platform.
- *
- *  Author:	Jürgen Schindele
- *  Created:	20 02, 2006
- *  Copyright:	Jürgen Schindele
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/leds.h>
-#include <linux/export.h>
-#include <linux/sched.h>
-#include <linux/bitops.h>
-#include <linux/fb.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/dm9000.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-#include <linux/regulator/machine.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <linux/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include "pxa27x.h"
-#include "trizeps4.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/irda-pxaficp.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include "smemc.h"
-
-#include "generic.h"
-#include "devices.h"
-
-/*	comment out the following line if you want to use the
- *	Standard UART from PXA for serial / irda transmission
- *	and acivate it if you have status leds connected */
-#define STATUS_LEDS_ON_STUART_PINS 1
-
-/*****************************************************************************
- * MultiFunctionPins of CPU
- *****************************************************************************/
-static unsigned long trizeps4_pin_config[] __initdata = {
-	/* Chip Selects */
-	GPIO15_nCS_1,		/* DiskOnChip CS */
-	GPIO93_GPIO,		/* TRIZEPS4_DOC_IRQ */
-	GPIO94_GPIO,		/* DOC lock */
-
-	GPIO78_nCS_2,		/* DM9000 CS */
-	GPIO101_GPIO,		/* TRIZEPS4_ETH_IRQ */
-
-	GPIO79_nCS_3,		/* Logic CS */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,	/* Logic irq */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* LCD - 16bpp Active TFT */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* UART */
-	GPIO9_FFUART_CTS,
-	GPIO10_FFUART_DCD,
-	GPIO16_FFUART_TXD,
-	GPIO33_FFUART_DSR,
-	GPIO38_FFUART_RI,
-	GPIO82_FFUART_DTR,
-	GPIO83_FFUART_RTS,
-	GPIO96_FFUART_RXD,
-
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-#ifdef STATUS_LEDS_ON_STUART_PINS
-	GPIO46_GPIO,
-	GPIO47_GPIO,
-#else
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-#endif
-	/* PCMCIA */
-	GPIO11_GPIO,			/* TRIZEPS4_CD_IRQ */
-	GPIO13_GPIO,			/* TRIZEPS4_READY_NINT */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO102_nPCE_1,
-	GPIO104_PSKTSEL,
-
-	/* MultiMediaCard */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO12_GPIO,			/* TRIZEPS4_MMC_IRQ */
-
-	/* USB OHCI */
-	GPIO88_USBH1_PWR,		/* USBHPWR1 */
-	GPIO89_USBH1_PEN,		/* USBHPEN1 */
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-};
-
-static unsigned long trizeps4wl_pin_config[] __initdata = {
-	/* SSP 2 */
-	GPIO14_SSP2_SFRM,
-	GPIO19_SSP2_SCLK,
-	GPIO53_GPIO,			/* TRIZEPS4_SPI_IRQ */
-	GPIO86_SSP2_RXD,
-	GPIO87_SSP2_TXD,
-};
-
-/****************************************************************************
- * ONBOARD FLASH
- ****************************************************************************/
-static struct mtd_partition trizeps4_partitions[] = {
-	{
-		.name =		"Bootloader",
-		.offset =	0x00000000,
-		.size =		0x00040000,
-		.mask_flags =	MTD_WRITEABLE  /* force read-only */
-	}, {
-		.name =		"Backup",
-		.offset =	0x00040000,
-		.size =		0x00040000,
-	}, {
-		.name =		"Image",
-		.offset =	0x00080000,
-		.size =		0x01080000,
-	}, {
-		.name =		"IPSM",
-		.offset =	0x01100000,
-		.size =		0x00e00000,
-	}, {
-		.name =		"Registry",
-		.offset =	0x01f00000,
-		.size =		MTDPART_SIZ_FULL,
-	}
-};
-
-static struct physmap_flash_data trizeps4_flash_data[] = {
-	{
-		.width		= 4,			/* bankwidth in bytes */
-		.parts		= trizeps4_partitions,
-		.nr_parts	= ARRAY_SIZE(trizeps4_partitions)
-	}
-};
-
-static struct resource flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_32M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev = {
-		.platform_data = trizeps4_flash_data,
-	},
-	.resource = &flash_resource,
-	.num_resources = 1,
-};
-
-/****************************************************************************
- * DAVICOM DM9000 Ethernet
- ****************************************************************************/
-static struct resource dm9000_resources[] = {
-	[0] = {
-		.start	= TRIZEPS4_ETH_PHYS+0x300,
-		.end	= TRIZEPS4_ETH_PHYS+0x400-1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= TRIZEPS4_ETH_PHYS+0x8300,
-		.end	= TRIZEPS4_ETH_PHYS+0x8400-1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= TRIZEPS4_ETH_IRQ,
-		.end	= TRIZEPS4_ETH_IRQ,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct dm9000_plat_data tri_dm9000_platdata = {
-	.flags		= DM9000_PLATF_32BITONLY,
-};
-
-static struct platform_device dm9000_device = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
-	.dev		= {
-		.platform_data = &tri_dm9000_platdata,
-	}
-};
-
-/****************************************************************************
- * LED's on GPIO pins of PXA
- ****************************************************************************/
-static struct gpio_led trizeps4_led[] = {
-#ifdef STATUS_LEDS_ON_STUART_PINS
-	{
-		.name = "led0:orange:heartbeat",	/* */
-		.default_trigger = "heartbeat",
-		.gpio = GPIO_HEARTBEAT_LED,
-		.active_low = 1,
-	},
-	{
-		.name = "led1:yellow:cpubusy",		/* */
-		.default_trigger = "cpu-busy",
-		.gpio = GPIO_SYS_BUSY_LED,
-		.active_low = 1,
-	},
-#endif
-};
-
-static struct gpio_led_platform_data trizeps4_led_data = {
-	.leds		= trizeps4_led,
-	.num_leds	= ARRAY_SIZE(trizeps4_led),
-};
-
-static struct platform_device leds_devices = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &trizeps4_led_data,
-	},
-};
-
-static struct platform_device *trizeps4_devices[] __initdata = {
-	&flash_device,
-	&dm9000_device,
-	&leds_devices,
-};
-
-static struct platform_device *trizeps4wl_devices[] __initdata = {
-	&flash_device,
-	&leds_devices,
-};
-
-static short trizeps_conxs_bcr;
-
-/* PCCARD power switching supports only 3,3V */
-void board_pcmcia_power(int power)
-{
-	if (power) {
-		/* switch power on, put in reset and enable buffers */
-		trizeps_conxs_bcr |= power;
-		trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
-		trizeps_conxs_bcr &= ~ConXS_BCR_CF_BUF_EN;
-		BCR_writew(trizeps_conxs_bcr);
-		/* wait a little */
-		udelay(2000);
-		/* take reset away */
-		trizeps_conxs_bcr &= ~ConXS_BCR_CF_RESET;
-		BCR_writew(trizeps_conxs_bcr);
-		udelay(2000);
-	} else {
-		/* put in reset */
-		trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
-		BCR_writew(trizeps_conxs_bcr);
-		udelay(1000);
-		/* switch power off */
-		trizeps_conxs_bcr &= ~0xf;
-		BCR_writew(trizeps_conxs_bcr);
-	}
-	pr_debug("%s: o%s 0x%x\n", __func__, power ? "n" : "ff",
-			trizeps_conxs_bcr);
-}
-EXPORT_SYMBOL(board_pcmcia_power);
-
-/* backlight power switching for LCD panel */
-static void board_backlight_power(int on)
-{
-	if (on)
-		trizeps_conxs_bcr |= ConXS_BCR_L_DISP;
-	else
-		trizeps_conxs_bcr &= ~ConXS_BCR_L_DISP;
-
-	pr_debug("%s: o%s 0x%x\n", __func__, on ? "n" : "ff",
-			trizeps_conxs_bcr);
-	BCR_writew(trizeps_conxs_bcr);
-}
-
-/* a I2C based RTC is known on CONXS board */
-static struct i2c_board_info trizeps4_i2c_devices[] __initdata = {
-	{ I2C_BOARD_INFO("rtc-pcf8593", 0x51) }
-};
-
-/****************************************************************************
- * MMC card slot external to module
- ****************************************************************************/
-static int trizeps4_mci_init(struct device *dev, irq_handler_t mci_detect_int,
-		void *data)
-{
-	int err;
-
-	err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int,
-			  IRQF_TRIGGER_RISING, "MMC card detect", data);
-	if (err) {
-		printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request"
-						"MMC card detect IRQ\n");
-		return -1;
-	}
-	return 0;
-}
-
-static void trizeps4_mci_exit(struct device *dev, void *data)
-{
-	free_irq(TRIZEPS4_MMC_IRQ, data);
-}
-
-static struct pxamci_platform_data trizeps4_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.detect_delay_ms= 10,
-	.init 		= trizeps4_mci_init,
-	.exit		= trizeps4_mci_exit,
-	.get_ro		= NULL,	/* write-protection not supported */
-	.setpower 	= NULL,	/* power-switching not supported */
-};
-
-/****************************************************************************
- * IRDA mode switching on stuart
- ****************************************************************************/
-#ifndef STATUS_LEDS_ON_STUART_PINS
-static short trizeps_conxs_ircr;
-
-static int trizeps4_irda_startup(struct device *dev)
-{
-	trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
-	IRCR_writew(trizeps_conxs_ircr);
-	return 0;
-}
-
-static void trizeps4_irda_shutdown(struct device *dev)
-{
-	trizeps_conxs_ircr |= ConXS_IRCR_SD;
-	IRCR_writew(trizeps_conxs_ircr);
-}
-
-static void trizeps4_irda_transceiver_mode(struct device *dev, int mode)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	/* Switch mode */
-	if (mode & IR_SIRMODE)
-		trizeps_conxs_ircr &= ~ConXS_IRCR_MODE;	/* Slow mode */
-	else if (mode & IR_FIRMODE)
-		trizeps_conxs_ircr |= ConXS_IRCR_MODE;	/* Fast mode */
-
-	/* Switch power */
-	if (mode & IR_OFF)
-		trizeps_conxs_ircr |= ConXS_IRCR_SD;
-	else
-		trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
-
-	IRCR_writew(trizeps_conxs_ircr);
-	local_irq_restore(flags);
-
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
-static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
-	.gpio_pwdown		= -1,
-	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode	= trizeps4_irda_transceiver_mode,
-	.startup		= trizeps4_irda_startup,
-	.shutdown		= trizeps4_irda_shutdown,
-};
-#endif
-
-/****************************************************************************
- * OHCI USB port
- ****************************************************************************/
-static struct pxaohci_platform_data trizeps4_ohci_platform_data = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-static struct map_desc trizeps4_io_desc[] __initdata = {
-	{ 	/* ConXS CFSR */
-		.virtual	= TRIZEPS4_CFSR_VIRT,
-		.pfn		= __phys_to_pfn(TRIZEPS4_CFSR_PHYS),
-		.length		= 0x00001000,
-		.type		= MT_DEVICE
-	},
-	{	/* ConXS BCR */
-		.virtual	= TRIZEPS4_BOCR_VIRT,
-		.pfn		= __phys_to_pfn(TRIZEPS4_BOCR_PHYS),
-		.length		= 0x00001000,
-		.type		= MT_DEVICE
-	},
-	{ 	/* ConXS IRCR */
-		.virtual	= TRIZEPS4_IRCR_VIRT,
-		.pfn		= __phys_to_pfn(TRIZEPS4_IRCR_PHYS),
-		.length		= 0x00001000,
-		.type		= MT_DEVICE
-	},
-	{	/* ConXS DCR */
-		.virtual	= TRIZEPS4_DICR_VIRT,
-		.pfn		= __phys_to_pfn(TRIZEPS4_DICR_PHYS),
-		.length		= 0x00001000,
-		.type		= MT_DEVICE
-	},
-	{	/* ConXS UPSR */
-		.virtual	= TRIZEPS4_UPSR_VIRT,
-		.pfn		= __phys_to_pfn(TRIZEPS4_UPSR_PHYS),
-		.length		= 0x00001000,
-		.type		= MT_DEVICE
-	}
-};
-
-static struct pxafb_mode_info sharp_lcd_mode = {
-	.pixclock	= 78000,
-	.xres		= 640,
-	.yres		= 480,
-	.bpp		= 8,
-	.hsync_len	= 4,
-	.left_margin	= 4,
-	.right_margin	= 4,
-	.vsync_len	= 2,
-	.upper_margin	= 0,
-	.lower_margin	= 0,
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	.cmap_greyscale	= 0,
-};
-
-static struct pxafb_mach_info sharp_lcd = {
-	.modes		= &sharp_lcd_mode,
-	.num_modes	= 1,
-	.lcd_conn	= LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL,
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-	.pxafb_backlight_power = board_backlight_power,
-};
-
-static struct pxafb_mode_info toshiba_lcd_mode = {
-	.pixclock	= 39720,
-	.xres		= 640,
-	.yres		= 480,
-	.bpp		= 8,
-	.hsync_len	= 63,
-	.left_margin	= 12,
-	.right_margin	= 12,
-	.vsync_len	= 4,
-	.upper_margin	= 32,
-	.lower_margin	= 10,
-	.sync		= 0,
-	.cmap_greyscale	= 0,
-};
-
-static struct pxafb_mach_info toshiba_lcd = {
-	.modes		= &toshiba_lcd_mode,
-	.num_modes	= 1,
-	.lcd_conn	= (LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-	.pxafb_backlight_power = board_backlight_power,
-};
-
-static void __init trizeps4_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4_pin_config));
-	if (machine_is_trizeps4wl()) {
-		pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4wl_pin_config));
-		platform_add_devices(trizeps4wl_devices,
-					ARRAY_SIZE(trizeps4wl_devices));
-	} else {
-		platform_add_devices(trizeps4_devices,
-					ARRAY_SIZE(trizeps4_devices));
-	}
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	if (0)	/* dont know how to determine LCD */
-		pxa_set_fb_info(NULL, &sharp_lcd);
-	else
-		pxa_set_fb_info(NULL, &toshiba_lcd);
-
-	pxa_set_mci_info(&trizeps4_mci_platform_data);
-#ifndef STATUS_LEDS_ON_STUART_PINS
-	pxa_set_ficp_info(&trizeps4_ficp_platform_data);
-#endif
-	pxa_set_ohci_info(&trizeps4_ohci_platform_data);
-	pxa_set_ac97_info(NULL);
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, trizeps4_i2c_devices,
-					ARRAY_SIZE(trizeps4_i2c_devices));
-
-	/* this is the reset value */
-	trizeps_conxs_bcr = 0x00A0;
-
-	BCR_writew(trizeps_conxs_bcr);
-	board_backlight_power(1);
-
-	regulator_has_full_constraints();
-}
-
-static void __init trizeps4_map_io(void)
-{
-	pxa27x_map_io();
-	iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
-
-	if ((__raw_readl(MSC0) & 0x8) && (__raw_readl(BOOT_DEF) & 0x1)) {
-		/* if flash is 16 bit wide its a Trizeps4 WL */
-		__machine_arch_type = MACH_TYPE_TRIZEPS4WL;
-		trizeps4_flash_data[0].width = 2;
-	} else {
-		/* if flash is 32 bit wide its a Trizeps4 */
-		__machine_arch_type = MACH_TYPE_TRIZEPS4;
-		trizeps4_flash_data[0].width = 4;
-	}
-}
-
-MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
-	/* MAINTAINER("Jürgen Schindele") */
-	.atag_offset	= 0x100,
-	.init_machine	= trizeps4_init,
-	.map_io		= trizeps4_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-
-MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
-	/* MAINTAINER("Jürgen Schindele") */
-	.atag_offset	= 0x100,
-	.init_machine	= trizeps4_init,
-	.map_io		= trizeps4_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/trizeps4.h b/arch/arm/mach-pxa/trizeps4.h
deleted file mode 100644
index b6c19d155ef9..000000000000
--- a/arch/arm/mach-pxa/trizeps4.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/************************************************************************
- * Include file for TRIZEPS4 SoM and ConXS eval-board
- * Copyright (c) Jürgen Schindele
- * 2006
- ************************************************************************/
-
-/*
- * Includes/Defines
- */
-#ifndef _TRIPEPS4_H_
-#define _TRIPEPS4_H_
-
-#include "addr-map.h"
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
-
-/* physical memory regions */
-#define TRIZEPS4_FLASH_PHYS	(PXA_CS0_PHYS)  /* Flash region */
-#define TRIZEPS4_DISK_PHYS	(PXA_CS1_PHYS)  /* Disk On Chip region */
-#define TRIZEPS4_ETH_PHYS	(PXA_CS2_PHYS)  /* Ethernet DM9000 region */
-#define TRIZEPS4_PIC_PHYS	(PXA_CS3_PHYS)	/* Logic chip on ConXS-Board */
-#define TRIZEPS4_SDRAM_BASE	0xa0000000      /* SDRAM region */
-
-				/* Logic on ConXS-board CSFR register*/
-#define TRIZEPS4_CFSR_PHYS	(PXA_CS3_PHYS)
-				/* Logic on ConXS-board BOCR register*/
-#define TRIZEPS4_BOCR_PHYS	(PXA_CS3_PHYS+0x02000000)
-				/* Logic on ConXS-board IRCR register*/
-#define TRIZEPS4_IRCR_PHYS	(PXA_CS3_PHYS+0x02400000)
-				/* Logic on ConXS-board UPSR register*/
-#define TRIZEPS4_UPSR_PHYS	(PXA_CS3_PHYS+0x02800000)
-				/* Logic on ConXS-board DICR register*/
-#define TRIZEPS4_DICR_PHYS	(PXA_CS3_PHYS+0x03800000)
-
-/* virtual memory regions */
-#define TRIZEPS4_DISK_VIRT	0xF0000000	/* Disk On Chip region */
-
-#define TRIZEPS4_PIC_VIRT	0xF0100000	/* not used */
-#define TRIZEPS4_CFSR_VIRT	0xF0100000
-#define TRIZEPS4_BOCR_VIRT	0xF0200000
-#define TRIZEPS4_DICR_VIRT	0xF0300000
-#define TRIZEPS4_IRCR_VIRT	0xF0400000
-#define TRIZEPS4_UPSR_VIRT	0xF0500000
-
-/* size of flash */
-#define TRIZEPS4_FLASH_SIZE	0x02000000	/* Flash size 32 MB */
-
-/* Ethernet Controller Davicom DM9000 */
-#define GPIO_DM9000		101
-#define TRIZEPS4_ETH_IRQ	PXA_GPIO_TO_IRQ(GPIO_DM9000)
-
-/* UCB1400 audio / TS-controller */
-#define GPIO_UCB1400		1
-#define TRIZEPS4_UCB1400_IRQ	PXA_GPIO_TO_IRQ(GPIO_UCB1400)
-
-/* PCMCIA socket Compact Flash */
-#define GPIO_PCD		11		/* PCMCIA Card Detect */
-#define TRIZEPS4_CD_IRQ		PXA_GPIO_TO_IRQ(GPIO_PCD)
-#define GPIO_PRDY		13		/* READY / nINT */
-#define TRIZEPS4_READY_NINT	PXA_GPIO_TO_IRQ(GPIO_PRDY)
-
-/* MMC socket */
-#define GPIO_MMC_DET		12
-#define TRIZEPS4_MMC_IRQ	PXA_GPIO_TO_IRQ(GPIO_MMC_DET)
-
-/* DOC NAND chip */
-#define GPIO_DOC_LOCK           94
-#define GPIO_DOC_IRQ            93
-#define TRIZEPS4_DOC_IRQ        PXA_GPIO_TO_IRQ(GPIO_DOC_IRQ)
-
-/* SPI interface */
-#define GPIO_SPI                53
-#define TRIZEPS4_SPI_IRQ        PXA_GPIO_TO_IRQ(GPIO_SPI)
-
-/* LEDS using tx2 / rx2 */
-#define GPIO_SYS_BUSY_LED	46
-#define GPIO_HEARTBEAT_LED	47
-
-/* Off-module PIC on ConXS board */
-#define GPIO_PIC		0
-#define TRIZEPS4_PIC_IRQ	PXA_GPIO_TO_IRQ(GPIO_PIC)
-
-#ifdef CONFIG_MACH_TRIZEPS_CONXS
-/* for CONXS base board define these registers */
-#define CFSR_P2V(x)	((x) - TRIZEPS4_CFSR_PHYS + TRIZEPS4_CFSR_VIRT)
-#define CFSR_V2P(x)	((x) - TRIZEPS4_CFSR_VIRT + TRIZEPS4_CFSR_PHYS)
-
-#define BCR_P2V(x)	((x) - TRIZEPS4_BOCR_PHYS + TRIZEPS4_BOCR_VIRT)
-#define BCR_V2P(x)	((x) - TRIZEPS4_BOCR_VIRT + TRIZEPS4_BOCR_PHYS)
-
-#define DCR_P2V(x)	((x) - TRIZEPS4_DICR_PHYS + TRIZEPS4_DICR_VIRT)
-#define DCR_V2P(x)	((x) - TRIZEPS4_DICR_VIRT + TRIZEPS4_DICR_PHYS)
-
-#define IRCR_P2V(x)	((x) - TRIZEPS4_IRCR_PHYS + TRIZEPS4_IRCR_VIRT)
-#define IRCR_V2P(x)	((x) - TRIZEPS4_IRCR_VIRT + TRIZEPS4_IRCR_PHYS)
-
-#ifndef __ASSEMBLY__
-static inline unsigned short CFSR_readw(void)
-{
-	/* [Compact Flash Status Register] is read only */
-	return *((unsigned short *)CFSR_P2V(0x0C000000));
-}
-static inline void BCR_writew(unsigned short value)
-{
-	/* [Board Control Regsiter] is write only */
-	*((unsigned short *)BCR_P2V(0x0E000000)) = value;
-}
-static inline void DCR_writew(unsigned short value)
-{
-	/* [Display Control Register] is write only */
-	*((unsigned short *)DCR_P2V(0x0E000000)) = value;
-}
-static inline void IRCR_writew(unsigned short value)
-{
-	/* [InfraRed data Control Register] is write only */
-	*((unsigned short *)IRCR_P2V(0x0E000000)) = value;
-}
-#else
-#define ConXS_CFSR		CFSR_P2V(0x0C000000)
-#define ConXS_BCR		BCR_P2V(0x0E000000)
-#define ConXS_DCR		DCR_P2V(0x0F800000)
-#define ConXS_IRCR		IRCR_P2V(0x0F800000)
-#endif
-#else
-/* for whatever baseboard define function registers */
-static inline unsigned short CFSR_readw(void)
-{
-	return 0;
-}
-static inline void BCR_writew(unsigned short value)
-{
-	;
-}
-static inline void DCR_writew(unsigned short value)
-{
-	;
-}
-static inline void IRCR_writew(unsigned short value)
-{
-	;
-}
-#endif	/* CONFIG_MACH_TRIZEPS_CONXS */
-
-#define ConXS_CFSR_BVD_MASK	0x0003
-#define ConXS_CFSR_BVD1		(1 << 0)
-#define ConXS_CFSR_BVD2		(1 << 1)
-#define ConXS_CFSR_VS_MASK	0x000C
-#define ConXS_CFSR_VS1		(1 << 2)
-#define ConXS_CFSR_VS2		(1 << 3)
-#define ConXS_CFSR_VS_5V	(0x3 << 2)
-#define ConXS_CFSR_VS_3V3	0x0
-
-#define ConXS_BCR_S0_POW_EN0	(1 << 0)
-#define ConXS_BCR_S0_POW_EN1	(1 << 1)
-#define ConXS_BCR_L_DISP	(1 << 4)
-#define ConXS_BCR_CF_BUF_EN	(1 << 5)
-#define ConXS_BCR_CF_RESET	(1 << 7)
-#define ConXS_BCR_S0_VCC_3V3	0x1
-#define ConXS_BCR_S0_VCC_5V0	0x2
-#define ConXS_BCR_S0_VPP_12V	0x4
-#define ConXS_BCR_S0_VPP_3V3	0x8
-
-#define ConXS_IRCR_MODE		(1 << 0)
-#define ConXS_IRCR_SD		(1 << 1)
-
-#endif /* _TRIPEPS4_H_ */
diff --git a/arch/arm/mach-pxa/viper-pcmcia.c b/arch/arm/mach-pxa/viper-pcmcia.c
deleted file mode 100644
index 26599dcc49b3..000000000000
--- a/arch/arm/mach-pxa/viper-pcmcia.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * Viper/Zeus PCMCIA support
- *   Copyright 2004 Arcom Control Systems
- *
- * Maintained by Marc Zyngier <maz@misterjones.org>
- *
- * Based on:
- *   iPAQ h2200 PCMCIA support
- *   Copyright 2004 Koen Kooi <koen@vestingbar.nl>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-#include <pcmcia/ss.h>
-#include <pcmcia/soc_common.h>
-
-#include <asm/irq.h>
-
-#include "viper-pcmcia.h"
-
-static struct platform_device *arcom_pcmcia_dev;
-
-static inline struct arcom_pcmcia_pdata *viper_get_pdata(void)
-{
-	return arcom_pcmcia_dev->dev.platform_data;
-}
-
-static int viper_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
-	unsigned long flags;
-
-	skt->stat[SOC_STAT_CD].gpio = pdata->cd_gpio;
-	skt->stat[SOC_STAT_CD].name = "PCMCIA_CD";
-	skt->stat[SOC_STAT_RDY].gpio = pdata->rdy_gpio;
-	skt->stat[SOC_STAT_RDY].name = "CF ready";
-
-	if (gpio_request(pdata->pwr_gpio, "CF power"))
-		goto err_request_pwr;
-
-	local_irq_save(flags);
-
-	if (gpio_direction_output(pdata->pwr_gpio, 0)) {
-		local_irq_restore(flags);
-		goto err_dir;
-	}
-
-	local_irq_restore(flags);
-
-	return 0;
-
-err_dir:
-	gpio_free(pdata->pwr_gpio);
-err_request_pwr:
-	dev_err(&arcom_pcmcia_dev->dev, "Failed to setup PCMCIA GPIOs\n");
-	return -1;
-}
-
-/*
- * Release all resources.
- */
-static void viper_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
-	struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
-
-	gpio_free(pdata->pwr_gpio);
-}
-
-static void viper_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-				      struct pcmcia_state *state)
-{
-	state->vs_3v  = 1; /* Can only apply 3.3V */
-	state->vs_Xv  = 0;
-}
-
-static int viper_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-					 const socket_state_t *state)
-{
-	struct arcom_pcmcia_pdata *pdata = viper_get_pdata();
-
-	/* Silently ignore Vpp, output enable, speaker enable. */
-	pdata->reset(state->flags & SS_RESET);
-
-	/* Apply socket voltage */
-	switch (state->Vcc) {
-	case 0:
-		gpio_set_value(pdata->pwr_gpio, 0);
-		break;
-	case 33:
-		gpio_set_value(pdata->pwr_gpio, 1);
-		break;
-	default:
-		dev_err(&arcom_pcmcia_dev->dev, "Unsupported Vcc:%d\n", state->Vcc);
-		return -1;
-	}
-
-	return 0;
-}
-
-static struct pcmcia_low_level viper_pcmcia_ops = {
-	.owner          	= THIS_MODULE,
-	.hw_init        	= viper_pcmcia_hw_init,
-	.hw_shutdown		= viper_pcmcia_hw_shutdown,
-	.socket_state		= viper_pcmcia_socket_state,
-	.configure_socket	= viper_pcmcia_configure_socket,
-	.nr         		= 1,
-};
-
-static struct platform_device *viper_pcmcia_device;
-
-static int viper_pcmcia_probe(struct platform_device *pdev)
-{
-	int ret;
-
-	/* I can't imagine more than one device, but you never know... */
-	if (arcom_pcmcia_dev)
-		return -EEXIST;
-
-	if (!pdev->dev.platform_data)
-		return -EINVAL;
-
-	viper_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!viper_pcmcia_device)
-		return -ENOMEM;
-
-	arcom_pcmcia_dev = pdev;
-
-	viper_pcmcia_device->dev.parent = &pdev->dev;
-
-	ret = platform_device_add_data(viper_pcmcia_device,
-				       &viper_pcmcia_ops,
-				       sizeof(viper_pcmcia_ops));
-
-	if (!ret)
-		ret = platform_device_add(viper_pcmcia_device);
-
-	if (ret) {
-		platform_device_put(viper_pcmcia_device);
-		arcom_pcmcia_dev = NULL;
-	}
-
-	return ret;
-}
-
-static int viper_pcmcia_remove(struct platform_device *pdev)
-{
-	platform_device_unregister(viper_pcmcia_device);
-	arcom_pcmcia_dev = NULL;
-	return 0;
-}
-
-static struct platform_device_id viper_pcmcia_id_table[] = {
-	{ .name = "viper-pcmcia", },
-	{ .name = "zeus-pcmcia",  },
-	{ },
-};
-
-static struct platform_driver viper_pcmcia_driver = {
-	.probe		= viper_pcmcia_probe,
-	.remove		= viper_pcmcia_remove,
-	.driver		= {
-		.name	= "arcom-pcmcia",
-	},
-	.id_table	= viper_pcmcia_id_table,
-};
-
-module_platform_driver(viper_pcmcia_driver);
-
-MODULE_DEVICE_TABLE(platform, viper_pcmcia_id_table);
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/viper-pcmcia.h b/arch/arm/mach-pxa/viper-pcmcia.h
deleted file mode 100644
index a23b58aff9e1..000000000000
--- a/arch/arm/mach-pxa/viper-pcmcia.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ARCOM_PCMCIA_H
-#define __ARCOM_PCMCIA_H
-
-struct arcom_pcmcia_pdata {
-	int	cd_gpio;
-	int	rdy_gpio;
-	int	pwr_gpio;
-	void	(*reset)(int state);
-};
-
-#endif
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
deleted file mode 100644
index 5b43351ee840..000000000000
--- a/arch/arm/mach-pxa/viper.c
+++ /dev/null
@@ -1,1034 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/viper.c
- *
- *  Support for the Arcom VIPER SBC.
- *
- *  Author:	Ian Campbell
- *  Created:    Feb 03, 2003
- *  Copyright:  Arcom Control Systems
- *
- *  Maintained by Marc Zyngier <maz@misterjones.org>
- *                             <marc.zyngier@altran.com>
- *
- * Based on lubbock.c:
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- */
-
-#include <linux/types.h>
-#include <linux/memory.h>
-#include <linux/cpu.h>
-#include <linux/cpufreq.h>
-#include <linux/delay.h>
-#include <linux/fs.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/major.h>
-#include <linux/module.h>
-#include <linux/pm.h>
-#include <linux/sched.h>
-#include <linux/gpio.h>
-#include <linux/jiffies.h>
-#include <linux/platform_data/i2c-gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/serial_8250.h>
-#include <linux/smc91x.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/usb/isp116x.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/syscore_ops.h>
-
-#include "pxa25x.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include <linux/platform_data/video-pxafb.h>
-#include "regs-uart.h"
-#include "viper-pcmcia.h"
-#include "viper.h"
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <linux/sizes.h>
-#include <asm/system_info.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "generic.h"
-#include "devices.h"
-
-static unsigned int icr;
-
-static void viper_icr_set_bit(unsigned int bit)
-{
-	icr |= bit;
-	VIPER_ICR = icr;
-}
-
-static void viper_icr_clear_bit(unsigned int bit)
-{
-	icr &= ~bit;
-	VIPER_ICR = icr;
-}
-
-/* This function is used from the pcmcia module to reset the CF */
-static void viper_cf_reset(int state)
-{
-	if (state)
-		viper_icr_set_bit(VIPER_ICR_CF_RST);
-	else
-		viper_icr_clear_bit(VIPER_ICR_CF_RST);
-}
-
-static struct arcom_pcmcia_pdata viper_pcmcia_info = {
-	.cd_gpio	= VIPER_CF_CD_GPIO,
-	.rdy_gpio	= VIPER_CF_RDY_GPIO,
-	.pwr_gpio	= VIPER_CF_POWER_GPIO,
-	.reset		= viper_cf_reset,
-};
-
-static struct platform_device viper_pcmcia_device = {
-	.name		= "viper-pcmcia",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &viper_pcmcia_info,
-	},
-};
-
-/*
- * The CPLD version register was not present on VIPER boards prior to
- * v2i1. On v1 boards where the version register is not present we
- * will just read back the previous value from the databus.
- *
- * Therefore we do two reads. The first time we write 0 to the
- * (read-only) register before reading and the second time we write
- * 0xff first. If the two reads do not match or they read back as 0xff
- * or 0x00 then we have version 1 hardware.
- */
-static u8 viper_hw_version(void)
-{
-	u8 v1, v2;
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	VIPER_VERSION = 0;
-	v1 = VIPER_VERSION;
-	VIPER_VERSION = 0xff;
-	v2 = VIPER_VERSION;
-
-	v1 = (v1 != v2 || v1 == 0xff) ? 0 : v1;
-
-	local_irq_restore(flags);
-	return v1;
-}
-
-/* CPU system core operations. */
-static int viper_cpu_suspend(void)
-{
-	viper_icr_set_bit(VIPER_ICR_R_DIS);
-	return 0;
-}
-
-static void viper_cpu_resume(void)
-{
-	viper_icr_clear_bit(VIPER_ICR_R_DIS);
-}
-
-static struct syscore_ops viper_cpu_syscore_ops = {
-	.suspend	= viper_cpu_suspend,
-	.resume		= viper_cpu_resume,
-};
-
-static unsigned int current_voltage_divisor;
-
-/*
- * If force is not true then step from existing to new divisor. If
- * force is true then jump straight to the new divisor. Stepping is
- * used because if the jump in voltage is too large, the VCC can dip
- * too low and the regulator cuts out.
- *
- * force can be used to initialize the divisor to a know state by
- * setting the value for the current clock speed, since we are already
- * running at that speed we know the voltage should be pretty close so
- * the jump won't be too large
- */
-static void viper_set_core_cpu_voltage(unsigned long khz, int force)
-{
-	int i = 0;
-	unsigned int divisor = 0;
-	const char *v;
-
-	if (khz < 200000) {
-		v = "1.0"; divisor = 0xfff;
-	} else if (khz < 300000) {
-		v = "1.1"; divisor = 0xde5;
-	} else {
-		v = "1.3"; divisor = 0x325;
-	}
-
-	pr_debug("viper: setting CPU core voltage to %sV at %d.%03dMHz\n",
-		 v, (int)khz / 1000, (int)khz % 1000);
-
-#define STEP 0x100
-	do {
-		int step;
-
-		if (force)
-			step = divisor;
-		else if (current_voltage_divisor < divisor - STEP)
-			step = current_voltage_divisor + STEP;
-		else if (current_voltage_divisor > divisor + STEP)
-			step = current_voltage_divisor - STEP;
-		else
-			step = divisor;
-		force = 0;
-
-		gpio_set_value(VIPER_PSU_CLK_GPIO, 0);
-		gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 0);
-
-		for (i = 1 << 11 ; i > 0 ; i >>= 1) {
-			udelay(1);
-
-			gpio_set_value(VIPER_PSU_DATA_GPIO, step & i);
-			udelay(1);
-
-			gpio_set_value(VIPER_PSU_CLK_GPIO, 1);
-			udelay(1);
-
-			gpio_set_value(VIPER_PSU_CLK_GPIO, 0);
-		}
-		udelay(1);
-
-		gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 1);
-		udelay(1);
-
-		gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 0);
-
-		current_voltage_divisor = step;
-	} while (current_voltage_divisor != divisor);
-}
-
-/* Interrupt handling */
-static unsigned long viper_irq_enabled_mask;
-static const int viper_isa_irqs[] = { 3, 4, 5, 6, 7, 10, 11, 12, 9, 14, 15 };
-static const int viper_isa_irq_map[] = {
-	0,		/* ISA irq #0, invalid */
-	0,		/* ISA irq #1, invalid */
-	0,		/* ISA irq #2, invalid */
-	1 << 0,		/* ISA irq #3 */
-	1 << 1,		/* ISA irq #4 */
-	1 << 2,		/* ISA irq #5 */
-	1 << 3,		/* ISA irq #6 */
-	1 << 4,		/* ISA irq #7 */
-	0,		/* ISA irq #8, invalid */
-	1 << 8,		/* ISA irq #9 */
-	1 << 5,		/* ISA irq #10 */
-	1 << 6,		/* ISA irq #11 */
-	1 << 7,		/* ISA irq #12 */
-	0,		/* ISA irq #13, invalid */
-	1 << 9,		/* ISA irq #14 */
-	1 << 10,	/* ISA irq #15 */
-};
-
-static inline int viper_irq_to_bitmask(unsigned int irq)
-{
-	return viper_isa_irq_map[irq - PXA_ISA_IRQ(0)];
-}
-
-static inline int viper_bit_to_irq(int bit)
-{
-	return viper_isa_irqs[bit] + PXA_ISA_IRQ(0);
-}
-
-static void viper_ack_irq(struct irq_data *d)
-{
-	int viper_irq = viper_irq_to_bitmask(d->irq);
-
-	if (viper_irq & 0xff)
-		VIPER_LO_IRQ_STATUS = viper_irq;
-	else
-		VIPER_HI_IRQ_STATUS = (viper_irq >> 8);
-}
-
-static void viper_mask_irq(struct irq_data *d)
-{
-	viper_irq_enabled_mask &= ~(viper_irq_to_bitmask(d->irq));
-}
-
-static void viper_unmask_irq(struct irq_data *d)
-{
-	viper_irq_enabled_mask |= viper_irq_to_bitmask(d->irq);
-}
-
-static inline unsigned long viper_irq_pending(void)
-{
-	return (VIPER_HI_IRQ_STATUS << 8 | VIPER_LO_IRQ_STATUS) &
-			viper_irq_enabled_mask;
-}
-
-static void viper_irq_handler(struct irq_desc *desc)
-{
-	unsigned int irq;
-	unsigned long pending;
-
-	pending = viper_irq_pending();
-	do {
-		/* we're in a chained irq handler,
-		 * so ack the interrupt by hand */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-
-		if (likely(pending)) {
-			irq = viper_bit_to_irq(__ffs(pending));
-			generic_handle_irq(irq);
-		}
-		pending = viper_irq_pending();
-	} while (pending);
-}
-
-static struct irq_chip viper_irq_chip = {
-	.name		= "ISA",
-	.irq_ack	= viper_ack_irq,
-	.irq_mask	= viper_mask_irq,
-	.irq_unmask	= viper_unmask_irq
-};
-
-static void __init viper_init_irq(void)
-{
-	int level;
-	int isa_irq;
-
-	pxa25x_init_irq();
-
-	/* setup ISA IRQs */
-	for (level = 0; level < ARRAY_SIZE(viper_isa_irqs); level++) {
-		isa_irq = viper_bit_to_irq(level);
-		irq_set_chip_and_handler(isa_irq, &viper_irq_chip,
-					 handle_edge_irq);
-		irq_clear_status_flags(isa_irq, IRQ_NOREQUEST | IRQ_NOPROBE);
-	}
-
-	irq_set_chained_handler(gpio_to_irq(VIPER_CPLD_GPIO),
-				viper_irq_handler);
-	irq_set_irq_type(gpio_to_irq(VIPER_CPLD_GPIO), IRQ_TYPE_EDGE_BOTH);
-}
-
-/* Flat Panel */
-static struct pxafb_mode_info fb_mode_info[] = {
-	{
-		.pixclock	= 157500,
-
-		.xres		= 320,
-		.yres		= 240,
-
-		.bpp		= 16,
-
-		.hsync_len	= 63,
-		.left_margin	= 7,
-		.right_margin	= 13,
-
-		.vsync_len	= 20,
-		.upper_margin	= 0,
-		.lower_margin	= 0,
-
-		.sync		= 0,
-	},
-};
-
-static struct pxafb_mach_info fb_info = {
-	.modes			= fb_mode_info,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static struct pwm_lookup viper_pwm_lookup[] = {
-	PWM_LOOKUP("pxa25x-pwm.0", 0, "pwm-backlight.0", NULL, 1000000,
-		   PWM_POLARITY_NORMAL),
-};
-
-static int viper_backlight_init(struct device *dev)
-{
-	int ret;
-
-	/* GPIO9 and 10 control FB backlight. Initialise to off */
-	ret = gpio_request(VIPER_BCKLIGHT_EN_GPIO, "Backlight");
-	if (ret)
-		goto err_request_bckl;
-
-	ret = gpio_request(VIPER_LCD_EN_GPIO, "LCD");
-	if (ret)
-		goto err_request_lcd;
-
-	ret = gpio_direction_output(VIPER_BCKLIGHT_EN_GPIO, 0);
-	if (ret)
-		goto err_dir;
-
-	ret = gpio_direction_output(VIPER_LCD_EN_GPIO, 0);
-	if (ret)
-		goto err_dir;
-
-	return 0;
-
-err_dir:
-	gpio_free(VIPER_LCD_EN_GPIO);
-err_request_lcd:
-	gpio_free(VIPER_BCKLIGHT_EN_GPIO);
-err_request_bckl:
-	dev_err(dev, "Failed to setup LCD GPIOs\n");
-
-	return ret;
-}
-
-static int viper_backlight_notify(struct device *dev, int brightness)
-{
-	gpio_set_value(VIPER_LCD_EN_GPIO, !!brightness);
-	gpio_set_value(VIPER_BCKLIGHT_EN_GPIO, !!brightness);
-
-	return brightness;
-}
-
-static void viper_backlight_exit(struct device *dev)
-{
-	gpio_free(VIPER_LCD_EN_GPIO);
-	gpio_free(VIPER_BCKLIGHT_EN_GPIO);
-}
-
-static struct platform_pwm_backlight_data viper_backlight_data = {
-	.max_brightness	= 100,
-	.dft_brightness	= 100,
-	.init		= viper_backlight_init,
-	.notify		= viper_backlight_notify,
-	.exit		= viper_backlight_exit,
-};
-
-static struct platform_device viper_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent		= &pxa25x_device_pwm0.dev,
-		.platform_data	= &viper_backlight_data,
-	},
-};
-
-/* Ethernet */
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.name	= "smc91x-regs",
-		.start  = VIPER_ETH_PHYS + 0x300,
-		.end    = VIPER_ETH_PHYS + 0x30f,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = PXA_GPIO_TO_IRQ(VIPER_ETH_GPIO),
-		.end    = PXA_GPIO_TO_IRQ(VIPER_ETH_GPIO),
-		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-	[2] = {
-		.name	= "smc91x-data32",
-		.start  = VIPER_ETH_DATA_PHYS,
-		.end    = VIPER_ETH_DATA_PHYS + 3,
-		.flags  = IORESOURCE_MEM,
-	},
-};
-
-static struct smc91x_platdata viper_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources  = ARRAY_SIZE(smc91x_resources),
-	.resource       = smc91x_resources,
-	.dev		= {
-		.platform_data	= &viper_smc91x_info,
-	},
-};
-
-/* i2c */
-static struct gpiod_lookup_table viper_i2c_gpiod_table = {
-	.dev_id		= "i2c-gpio.1",
-	.table		= {
-		GPIO_LOOKUP_IDX("gpio-pxa", VIPER_RTC_I2C_SDA_GPIO,
-				NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		GPIO_LOOKUP_IDX("gpio-pxa", VIPER_RTC_I2C_SCL_GPIO,
-				NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-	},
-};
-
-static struct i2c_gpio_platform_data i2c_bus_data = {
-	.udelay  = 10,
-	.timeout = HZ,
-};
-
-static struct platform_device i2c_bus_device = {
-	.name		= "i2c-gpio",
-	.id		= 1, /* pxa2xx-i2c is bus 0, so start at 1 */
-	.dev = {
-		.platform_data = &i2c_bus_data,
-	}
-};
-
-static struct i2c_board_info __initdata viper_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("ds1338", 0x68),
-	},
-};
-
-/*
- * Serial configuration:
- * You can either have the standard PXA ports driven by the PXA driver,
- * or all the ports (PXA + 16850) driven by the 8250 driver.
- * Choose your poison.
- */
-
-static struct resource viper_serial_resources[] = {
-#ifndef CONFIG_SERIAL_PXA
-	{
-		.start	= 0x40100000,
-		.end	= 0x4010001f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= 0x40200000,
-		.end	= 0x4020001f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= 0x40700000,
-		.end	= 0x4070001f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= VIPER_UARTA_PHYS,
-		.end	= VIPER_UARTA_PHYS + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= VIPER_UARTB_PHYS,
-		.end	= VIPER_UARTB_PHYS + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-#else
-	{
-		0,
-	},
-#endif
-};
-
-static struct plat_serial8250_port serial_platform_data[] = {
-#ifndef CONFIG_SERIAL_PXA
-	/* Internal UARTs */
-	{
-		.membase	= (void *)&FFUART,
-		.mapbase	= __PREG(FFUART),
-		.irq		= IRQ_FFUART,
-		.uartclk	= 921600 * 16,
-		.regshift	= 2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	{
-		.membase	= (void *)&BTUART,
-		.mapbase	= __PREG(BTUART),
-		.irq		= IRQ_BTUART,
-		.uartclk	= 921600 * 16,
-		.regshift	= 2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	{
-		.membase	= (void *)&STUART,
-		.mapbase	= __PREG(STUART),
-		.irq		= IRQ_STUART,
-		.uartclk	= 921600 * 16,
-		.regshift	= 2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	/* External UARTs */
-	{
-		.mapbase	= VIPER_UARTA_PHYS,
-		.irq		= PXA_GPIO_TO_IRQ(VIPER_UARTA_GPIO),
-		.irqflags	= IRQF_TRIGGER_RISING,
-		.uartclk	= 1843200,
-		.regshift	= 1,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP |
-				  UPF_SKIP_TEST,
-	},
-	{
-		.mapbase	= VIPER_UARTB_PHYS,
-		.irq		= PXA_GPIO_TO_IRQ(VIPER_UARTB_GPIO),
-		.irqflags	= IRQF_TRIGGER_RISING,
-		.uartclk	= 1843200,
-		.regshift	= 1,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP |
-				  UPF_SKIP_TEST,
-	},
-#endif
-	{ },
-};
-
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= 0,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-	.num_resources		= ARRAY_SIZE(viper_serial_resources),
-	.resource		= viper_serial_resources,
-};
-
-/* USB */
-static void isp116x_delay(struct device *dev, int delay)
-{
-	ndelay(delay);
-}
-
-static struct resource isp116x_resources[] = {
-	[0] = { /* DATA */
-		.start  = VIPER_USB_PHYS + 0,
-		.end    = VIPER_USB_PHYS + 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = { /* ADDR */
-		.start  = VIPER_USB_PHYS + 2,
-		.end    = VIPER_USB_PHYS + 3,
-		.flags  = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start  = PXA_GPIO_TO_IRQ(VIPER_USB_GPIO),
-		.end    = PXA_GPIO_TO_IRQ(VIPER_USB_GPIO),
-		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-/* (DataBusWidth16|AnalogOCEnable|DREQOutputPolarity|DownstreamPort15KRSel ) */
-static struct isp116x_platform_data isp116x_platform_data = {
-	/* Enable internal resistors on downstream ports */
-	.sel15Kres		= 1,
-	/* On-chip overcurrent protection */
-	.oc_enable		= 1,
-	/* INT output polarity */
-	.int_act_high		= 1,
-	/* INT edge or level triggered */
-	.int_edge_triggered	= 0,
-
-	/* WAKEUP pin connected - NOT SUPPORTED  */
-	/* .remote_wakeup_connected = 0, */
-	/* Wakeup by devices on usb bus enabled */
-	.remote_wakeup_enable	= 0,
-	.delay			= isp116x_delay,
-};
-
-static struct platform_device isp116x_device = {
-	.name			= "isp116x-hcd",
-	.id			= -1,
-	.num_resources  	= ARRAY_SIZE(isp116x_resources),
-	.resource       	= isp116x_resources,
-	.dev			= {
-		.platform_data	= &isp116x_platform_data,
-	},
-
-};
-
-/* MTD */
-static struct resource mtd_resources[] = {
-	[0] = {	/* RedBoot config + filesystem flash */
-		.start	= VIPER_FLASH_PHYS,
-		.end	= VIPER_FLASH_PHYS + SZ_32M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {	/* Boot flash */
-		.start	= VIPER_BOOT_PHYS,
-		.end	= VIPER_BOOT_PHYS + SZ_1M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = { /*
-		 * SRAM size is actually 256KB, 8bits, with a sparse mapping
-		 * (each byte is on a 16bit boundary).
-		 */
-		.start	= _VIPER_SRAM_BASE,
-		.end	= _VIPER_SRAM_BASE + SZ_512K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct mtd_partition viper_boot_flash_partition = {
-	.name		= "RedBoot",
-	.size		= SZ_1M,
-	.offset		= 0,
-	.mask_flags	= MTD_WRITEABLE,	/* force R/O */
-};
-
-static struct physmap_flash_data viper_flash_data[] = {
-	[0] = {
-		.width		= 2,
-		.parts		= NULL,
-		.nr_parts	= 0,
-	},
-	[1] = {
-		.width		= 2,
-		.parts		= &viper_boot_flash_partition,
-		.nr_parts	= 1,
-	},
-};
-
-static struct platform_device viper_mtd_devices[] = {
-	[0] = {
-		.name		= "physmap-flash",
-		.id		= 0,
-		.dev		= {
-			.platform_data	= &viper_flash_data[0],
-		},
-		.resource	= &mtd_resources[0],
-		.num_resources	= 1,
-	},
-	[1] = {
-		.name		= "physmap-flash",
-		.id		= 1,
-		.dev		= {
-			.platform_data	= &viper_flash_data[1],
-		},
-		.resource	= &mtd_resources[1],
-		.num_resources	= 1,
-	},
-};
-
-static struct platform_device *viper_devs[] __initdata = {
-	&smc91x_device,
-	&i2c_bus_device,
-	&serial_device,
-	&isp116x_device,
-	&viper_mtd_devices[0],
-	&viper_mtd_devices[1],
-	&viper_backlight_device,
-	&viper_pcmcia_device,
-};
-
-static mfp_cfg_t viper_pin_config[] __initdata = {
-	/* Chip selects */
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,
-	GPIO79_nCS_3,
-	GPIO80_nCS_4,
-	GPIO33_nCS_5,
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	/* FP Backlight */
-	GPIO9_GPIO, 				/* VIPER_BCKLIGHT_EN_GPIO */
-	GPIO10_GPIO,				/* VIPER_LCD_EN_GPIO */
-	GPIO16_PWM0_OUT,
-
-	/* Ethernet PHY Ready */
-	GPIO18_RDY,
-
-	/* Serial shutdown */
-	GPIO12_GPIO | MFP_LPM_DRIVE_HIGH,	/* VIPER_UART_SHDN_GPIO */
-
-	/* Compact-Flash / PC104 */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO52_nPCE_1,
-	GPIO53_nPCE_2,
-	GPIO54_nPSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO8_GPIO,				/* VIPER_CF_RDY_GPIO */
-	GPIO32_GPIO,				/* VIPER_CF_CD_GPIO */
-	GPIO82_GPIO,				/* VIPER_CF_POWER_GPIO */
-
-	/* Integrated UPS control */
-	GPIO20_GPIO,				/* VIPER_UPS_GPIO */
-
-	/* Vcc regulator control */
-	GPIO6_GPIO,				/* VIPER_PSU_DATA_GPIO */
-	GPIO11_GPIO,				/* VIPER_PSU_CLK_GPIO */
-	GPIO19_GPIO,				/* VIPER_PSU_nCS_LD_GPIO */
-
-	/* i2c busses */
-	GPIO26_GPIO,				/* VIPER_TPM_I2C_SDA_GPIO */
-	GPIO27_GPIO,				/* VIPER_TPM_I2C_SCL_GPIO */
-	GPIO83_GPIO,				/* VIPER_RTC_I2C_SDA_GPIO */
-	GPIO84_GPIO,				/* VIPER_RTC_I2C_SCL_GPIO */
-
-	/* PC/104 Interrupt */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,	/* VIPER_CPLD_GPIO */
-};
-
-static unsigned long viper_tpm;
-
-static int __init viper_tpm_setup(char *str)
-{
-	return kstrtoul(str, 10, &viper_tpm) >= 0;
-}
-
-__setup("tpm=", viper_tpm_setup);
-
-struct gpiod_lookup_table viper_tpm_i2c_gpiod_table = {
-	.dev_id = "i2c-gpio.2",
-	.table = {
-		GPIO_LOOKUP_IDX("gpio-pxa", VIPER_TPM_I2C_SDA_GPIO,
-				NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		GPIO_LOOKUP_IDX("gpio-pxa", VIPER_TPM_I2C_SCL_GPIO,
-				NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-	},
-};
-
-static void __init viper_tpm_init(void)
-{
-	struct platform_device *tpm_device;
-	struct i2c_gpio_platform_data i2c_tpm_data = {
-		.udelay  = 10,
-		.timeout = HZ,
-	};
-	char *errstr;
-
-	/* Allocate TPM i2c bus if requested */
-	if (!viper_tpm)
-		return;
-
-	gpiod_add_lookup_table(&viper_tpm_i2c_gpiod_table);
-	tpm_device = platform_device_alloc("i2c-gpio", 2);
-	if (tpm_device) {
-		if (!platform_device_add_data(tpm_device,
-					      &i2c_tpm_data,
-					      sizeof(i2c_tpm_data))) {
-			if (platform_device_add(tpm_device)) {
-				errstr = "register TPM i2c bus";
-				goto error_free_tpm;
-			}
-		} else {
-			errstr = "allocate TPM i2c bus data";
-			goto error_free_tpm;
-		}
-	} else {
-		errstr = "allocate TPM i2c device";
-		goto error_tpm;
-	}
-
-	return;
-
-error_free_tpm:
-	kfree(tpm_device);
-error_tpm:
-	pr_err("viper: Couldn't %s, giving up\n", errstr);
-}
-
-static void __init viper_init_vcore_gpios(void)
-{
-	if (gpio_request(VIPER_PSU_DATA_GPIO, "PSU data"))
-		goto err_request_data;
-
-	if (gpio_request(VIPER_PSU_CLK_GPIO, "PSU clock"))
-		goto err_request_clk;
-
-	if (gpio_request(VIPER_PSU_nCS_LD_GPIO, "PSU cs"))
-		goto err_request_cs;
-
-	if (gpio_direction_output(VIPER_PSU_DATA_GPIO, 0) ||
-	    gpio_direction_output(VIPER_PSU_CLK_GPIO, 0) ||
-	    gpio_direction_output(VIPER_PSU_nCS_LD_GPIO, 0))
-		goto err_dir;
-
-	/* c/should assume redboot set the correct level ??? */
-	viper_set_core_cpu_voltage(pxa25x_get_clk_frequency_khz(0), 1);
-
-	return;
-
-err_dir:
-	gpio_free(VIPER_PSU_nCS_LD_GPIO);
-err_request_cs:
-	gpio_free(VIPER_PSU_CLK_GPIO);
-err_request_clk:
-	gpio_free(VIPER_PSU_DATA_GPIO);
-err_request_data:
-	pr_err("viper: Failed to setup vcore control GPIOs\n");
-}
-
-static void __init viper_init_serial_gpio(void)
-{
-	if (gpio_request(VIPER_UART_SHDN_GPIO, "UARTs shutdown"))
-		goto err_request;
-
-	if (gpio_direction_output(VIPER_UART_SHDN_GPIO, 0))
-		goto err_dir;
-
-	return;
-
-err_dir:
-	gpio_free(VIPER_UART_SHDN_GPIO);
-err_request:
-	pr_err("viper: Failed to setup UART shutdown GPIO\n");
-}
-
-#ifdef CONFIG_CPU_FREQ
-static int viper_cpufreq_notifier(struct notifier_block *nb,
-				  unsigned long val, void *data)
-{
-	struct cpufreq_freqs *freq = data;
-
-	/* TODO: Adjust timings??? */
-
-	switch (val) {
-	case CPUFREQ_PRECHANGE:
-		if (freq->old < freq->new) {
-			/* we are getting faster so raise the voltage
-			 * before we change freq */
-			viper_set_core_cpu_voltage(freq->new, 0);
-		}
-		break;
-	case CPUFREQ_POSTCHANGE:
-		if (freq->old > freq->new) {
-			/* we are slowing down so drop the power
-			 * after we change freq */
-			viper_set_core_cpu_voltage(freq->new, 0);
-		}
-		break;
-	default:
-		/* ignore */
-		break;
-	}
-
-	return 0;
-}
-
-static struct notifier_block viper_cpufreq_notifier_block = {
-	.notifier_call  = viper_cpufreq_notifier
-};
-
-static void __init viper_init_cpufreq(void)
-{
-	if (cpufreq_register_notifier(&viper_cpufreq_notifier_block,
-				      CPUFREQ_TRANSITION_NOTIFIER))
-		pr_err("viper: Failed to setup cpufreq notifier\n");
-}
-#else
-static inline void viper_init_cpufreq(void) {}
-#endif
-
-static void viper_power_off(void)
-{
-	pr_notice("Shutting off UPS\n");
-	gpio_set_value(VIPER_UPS_GPIO, 1);
-	/* Spin to death... */
-	while (1);
-}
-
-static void __init viper_init(void)
-{
-	u8 version;
-
-	pm_power_off = viper_power_off;
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(viper_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	/* Wake-up serial console */
-	viper_init_serial_gpio();
-
-	pxa_set_fb_info(NULL, &fb_info);
-
-	/* v1 hardware cannot use the datacs line */
-	version = viper_hw_version();
-	if (version == 0)
-		smc91x_device.num_resources--;
-
-	pxa_set_i2c_info(NULL);
-	gpiod_add_lookup_table(&viper_i2c_gpiod_table);
-	pwm_add_table(viper_pwm_lookup, ARRAY_SIZE(viper_pwm_lookup));
-	platform_add_devices(viper_devs, ARRAY_SIZE(viper_devs));
-
-	viper_init_vcore_gpios();
-	viper_init_cpufreq();
-
-	register_syscore_ops(&viper_cpu_syscore_ops);
-
-	if (version) {
-		pr_info("viper: hardware v%di%d detected. "
-			"CPLD revision %d.\n",
-			VIPER_BOARD_VERSION(version),
-			VIPER_BOARD_ISSUE(version),
-			VIPER_CPLD_REVISION(version));
-		system_rev = (VIPER_BOARD_VERSION(version) << 8) |
-			     (VIPER_BOARD_ISSUE(version) << 4) |
-			     VIPER_CPLD_REVISION(version);
-	} else {
-		pr_info("viper: No version register.\n");
-	}
-
-	i2c_register_board_info(1, ARRAY_AND_SIZE(viper_i2c_devices));
-
-	viper_tpm_init();
-	pxa_set_ac97_info(NULL);
-}
-
-static struct map_desc viper_io_desc[] __initdata = {
-	{
-		.virtual = VIPER_CPLD_BASE,
-		.pfn     = __phys_to_pfn(VIPER_CPLD_PHYS),
-		.length  = 0x00300000,
-		.type    = MT_DEVICE,
-	},
-	{
-		.virtual = VIPER_PC104IO_BASE,
-		.pfn     = __phys_to_pfn(0x30000000),
-		.length  = 0x00800000,
-		.type    = MT_DEVICE,
-	},
-	{
-		/*
-		 * ISA I/O space mapping:
-		 * -  ports 0x0000-0x0fff are PC/104
-		 * -  ports 0x10000-0x10fff are PCMCIA slot 1
-		 * -  ports 0x11000-0x11fff are PC/104
-		 */
-		.virtual = PCI_IO_VIRT_BASE,
-		.pfn     = __phys_to_pfn(0x30000000),
-		.length  = 0x1000,
-		.type    = MT_DEVICE,
-	},
-};
-
-static void __init viper_map_io(void)
-{
-	pxa25x_map_io();
-
-	iotable_init(viper_io_desc, ARRAY_SIZE(viper_io_desc));
-
-	PCFR |= PCFR_OPDE;
-}
-
-MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC")
-	/* Maintainer: Marc Zyngier <maz@misterjones.org> */
-	.atag_offset	= 0x100,
-	.map_io		= viper_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= viper_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= viper_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/viper.h b/arch/arm/mach-pxa/viper.h
deleted file mode 100644
index 5a8b132229dc..000000000000
--- a/arch/arm/mach-pxa/viper.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-pxa/include/mach/viper.h
- *
- * Author:	Ian Campbell
- * Created:	Feb 03, 2003
- * Copyright:	Arcom Control Systems.
- *
- * Maintained by Marc Zyngier <maz@misterjones.org>
- *			      <marc.zyngier@altran.com>
- *
- * Created based on lubbock.h:
- *  Author:	Nicolas Pitre
- *  Created:	Jun 15, 2001
- *  Copyright:	MontaVista Software Inc.
- */
-
-#ifndef ARCH_VIPER_H
-#define ARCH_VIPER_H
-
-#define VIPER_BOOT_PHYS		PXA_CS0_PHYS
-#define VIPER_FLASH_PHYS	PXA_CS1_PHYS
-#define VIPER_ETH_PHYS		PXA_CS2_PHYS
-#define VIPER_USB_PHYS		PXA_CS3_PHYS
-#define VIPER_ETH_DATA_PHYS	PXA_CS4_PHYS
-#define VIPER_CPLD_PHYS		PXA_CS5_PHYS
-
-#define VIPER_CPLD_BASE		(0xf0000000)
-#define VIPER_PC104IO_BASE	(0xf1000000)
-#define VIPER_USB_BASE		(0xf1800000)
-
-#define VIPER_ETH_GPIO		(0)
-#define VIPER_CPLD_GPIO		(1)
-#define VIPER_USB_GPIO		(2)
-#define VIPER_UARTA_GPIO	(4)
-#define VIPER_UARTB_GPIO	(3)
-#define VIPER_CF_CD_GPIO	(32)
-#define VIPER_CF_RDY_GPIO	(8)
-#define VIPER_BCKLIGHT_EN_GPIO	(9)
-#define VIPER_LCD_EN_GPIO	(10)
-#define VIPER_PSU_DATA_GPIO	(6)
-#define VIPER_PSU_CLK_GPIO	(11)
-#define VIPER_UART_SHDN_GPIO	(12)
-#define VIPER_BRIGHTNESS_GPIO	(16)
-#define VIPER_PSU_nCS_LD_GPIO	(19)
-#define VIPER_UPS_GPIO		(20)
-#define VIPER_CF_POWER_GPIO	(82)
-#define VIPER_TPM_I2C_SDA_GPIO	(26)
-#define VIPER_TPM_I2C_SCL_GPIO	(27)
-#define VIPER_RTC_I2C_SDA_GPIO	(83)
-#define VIPER_RTC_I2C_SCL_GPIO	(84)
-
-#define VIPER_CPLD_P2V(x)	((x) - VIPER_CPLD_PHYS + VIPER_CPLD_BASE)
-#define VIPER_CPLD_V2P(x)	((x) - VIPER_CPLD_BASE + VIPER_CPLD_PHYS)
-
-#ifndef __ASSEMBLY__
-#  define __VIPER_CPLD_REG(x)	(*((volatile u16 *)VIPER_CPLD_P2V(x)))
-#endif
-
-/* board level registers in the CPLD: (offsets from CPLD_BASE) ... */
-
-/* ... Physical addresses */
-#define _VIPER_LO_IRQ_STATUS	(VIPER_CPLD_PHYS + 0x100000)
-#define _VIPER_ICR_PHYS		(VIPER_CPLD_PHYS + 0x100002)
-#define _VIPER_HI_IRQ_STATUS	(VIPER_CPLD_PHYS + 0x100004)
-#define _VIPER_VERSION_PHYS	(VIPER_CPLD_PHYS + 0x100006)
-#define VIPER_UARTA_PHYS	(VIPER_CPLD_PHYS + 0x300010)
-#define VIPER_UARTB_PHYS	(VIPER_CPLD_PHYS + 0x300000)
-#define _VIPER_SRAM_BASE	(VIPER_CPLD_PHYS + 0x800000)
-
-/* ... Virtual addresses */
-#define VIPER_LO_IRQ_STATUS	__VIPER_CPLD_REG(_VIPER_LO_IRQ_STATUS)
-#define VIPER_HI_IRQ_STATUS	__VIPER_CPLD_REG(_VIPER_HI_IRQ_STATUS)
-#define VIPER_VERSION		__VIPER_CPLD_REG(_VIPER_VERSION_PHYS)
-#define VIPER_ICR		__VIPER_CPLD_REG(_VIPER_ICR_PHYS)
-
-/* Decode VIPER_VERSION register */
-#define VIPER_CPLD_REVISION(x)	(((x) >> 5) & 0x7)
-#define VIPER_BOARD_VERSION(x)	(((x) >> 3) & 0x3)
-#define VIPER_BOARD_ISSUE(x)	(((x) >> 0) & 0x7)
-
-/* Interrupt and Configuration Register (VIPER_ICR) */
-/* This is a write only register. Only CF_RST is used under Linux */
-
-#define VIPER_ICR_RETRIG	(1 << 0)
-#define VIPER_ICR_AUTO_CLR	(1 << 1)
-#define VIPER_ICR_R_DIS		(1 << 2)
-#define VIPER_ICR_CF_RST	(1 << 3)
-
-#endif
-
diff --git a/arch/arm/mach-pxa/vpac270-pcmcia.c b/arch/arm/mach-pxa/vpac270-pcmcia.c
deleted file mode 100644
index 9fd990c8a5fb..000000000000
--- a/arch/arm/mach-pxa/vpac270-pcmcia.c
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/drivers/pcmcia/pxa2xx_vpac270.c
- *
- * Driver for Voipac PXA270 PCMCIA and CF sockets
- *
- * Copyright (C) 2010-2011 Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/gpio.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-
-#include "vpac270.h"
-
-#include <pcmcia/soc_common.h>
-
-static struct gpio vpac270_pcmcia_gpios[] = {
-	{ GPIO107_VPAC270_PCMCIA_PPEN,	GPIOF_INIT_LOW,	"PCMCIA PPEN" },
-	{ GPIO11_VPAC270_PCMCIA_RESET,	GPIOF_INIT_LOW,	"PCMCIA Reset" },
-};
-
-static struct gpio vpac270_cf_gpios[] = {
-	{ GPIO16_VPAC270_CF_RESET,	GPIOF_INIT_LOW,	"CF Reset" },
-};
-
-static int vpac270_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	int ret;
-
-	if (skt->nr == 0) {
-		ret = gpio_request_array(vpac270_pcmcia_gpios,
-				ARRAY_SIZE(vpac270_pcmcia_gpios));
-
-		skt->stat[SOC_STAT_CD].gpio = GPIO84_VPAC270_PCMCIA_CD;
-		skt->stat[SOC_STAT_CD].name = "PCMCIA CD";
-		skt->stat[SOC_STAT_RDY].gpio = GPIO35_VPAC270_PCMCIA_RDY;
-		skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready";
-	} else {
-		ret = gpio_request_array(vpac270_cf_gpios,
-				ARRAY_SIZE(vpac270_cf_gpios));
-
-		skt->stat[SOC_STAT_CD].gpio = GPIO17_VPAC270_CF_CD;
-		skt->stat[SOC_STAT_CD].name = "CF CD";
-		skt->stat[SOC_STAT_RDY].gpio = GPIO12_VPAC270_CF_RDY;
-		skt->stat[SOC_STAT_RDY].name = "CF Ready";
-	}
-
-	return ret;
-}
-
-static void vpac270_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
-{
-	if (skt->nr == 0)
-		gpio_free_array(vpac270_pcmcia_gpios,
-					ARRAY_SIZE(vpac270_pcmcia_gpios));
-	else
-		gpio_free_array(vpac270_cf_gpios,
-					ARRAY_SIZE(vpac270_cf_gpios));
-}
-
-static void vpac270_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
-					struct pcmcia_state *state)
-{
-	state->vs_3v  = 1;
-	state->vs_Xv  = 0;
-}
-
-static int
-vpac270_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
-				const socket_state_t *state)
-{
-	if (skt->nr == 0) {
-		gpio_set_value(GPIO11_VPAC270_PCMCIA_RESET,
-			(state->flags & SS_RESET));
-		gpio_set_value(GPIO107_VPAC270_PCMCIA_PPEN,
-			!(state->Vcc == 33 || state->Vcc == 50));
-	} else {
-		gpio_set_value(GPIO16_VPAC270_CF_RESET,
-			(state->flags & SS_RESET));
-	}
-
-	return 0;
-}
-
-static struct pcmcia_low_level vpac270_pcmcia_ops = {
-	.owner			= THIS_MODULE,
-
-	.first			= 0,
-	.nr			= 2,
-
-	.hw_init		= vpac270_pcmcia_hw_init,
-	.hw_shutdown		= vpac270_pcmcia_hw_shutdown,
-
-	.socket_state		= vpac270_pcmcia_socket_state,
-	.configure_socket	= vpac270_pcmcia_configure_socket,
-};
-
-static struct platform_device *vpac270_pcmcia_device;
-
-static int __init vpac270_pcmcia_init(void)
-{
-	int ret;
-
-	if (!machine_is_vpac270())
-		return -ENODEV;
-
-	vpac270_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
-	if (!vpac270_pcmcia_device)
-		return -ENOMEM;
-
-	ret = platform_device_add_data(vpac270_pcmcia_device,
-		&vpac270_pcmcia_ops, sizeof(vpac270_pcmcia_ops));
-
-	if (!ret)
-		ret = platform_device_add(vpac270_pcmcia_device);
-
-	if (ret)
-		platform_device_put(vpac270_pcmcia_device);
-
-	return ret;
-}
-
-static void __exit vpac270_pcmcia_exit(void)
-{
-	platform_device_unregister(vpac270_pcmcia_device);
-}
-
-module_init(vpac270_pcmcia_init);
-module_exit(vpac270_pcmcia_exit);
-
-MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
-MODULE_DESCRIPTION("PCMCIA support for Voipac PXA270");
-MODULE_ALIAS("platform:pxa2xx-pcmcia");
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
deleted file mode 100644
index 8f74bafcf1f9..000000000000
--- a/arch/arm/mach-pxa/vpac270.c
+++ /dev/null
@@ -1,736 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Hardware definitions for Voipac PXA270
- *
- * Copyright (C) 2010
- * Marek Vasut <marek.vasut@gmail.com>
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/onenand.h>
-#include <linux/dm9000.h>
-#include <linux/ucb1400.h>
-#include <linux/ata_platform.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/max1586.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "pxa27x.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include "vpac270.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include "pxa27x-udc.h"
-#include "udc.h"
-#include <linux/platform_data/ata-pxa.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long vpac270_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO53_GPIO,	/* SD detect */
-	GPIO52_GPIO,	/* SD r/o switch */
-
-	/* GPIO KEYS */
-	GPIO1_GPIO,	/* USER BTN */
-
-	/* LEDs */
-	GPIO15_GPIO,	/* orange led */
-
-	/* FFUART */
-	GPIO34_FFUART_RXD,
-	GPIO39_FFUART_TXD,
-	GPIO27_FFUART_RTS,
-	GPIO100_FFUART_CTS,
-	GPIO33_FFUART_DSR,
-	GPIO40_FFUART_DTR,
-	GPIO10_FFUART_DCD,
-	GPIO38_FFUART_RI,
-
-	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO86_LCD_LDD_16,
-	GPIO87_LCD_LDD_17,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
-
-	/* PCMCIA */
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO57_nIOIS16,
-	GPIO56_nPWAIT,
-	GPIO104_PSKTSEL,
-	GPIO84_GPIO,	/* PCMCIA CD */
-	GPIO35_GPIO,	/* PCMCIA RDY */
-	GPIO107_GPIO,	/* PCMCIA PPEN */
-	GPIO11_GPIO,	/* PCMCIA RESET */
-	GPIO17_GPIO,	/* CF CD */
-	GPIO12_GPIO,	/* CF RDY */
-	GPIO16_GPIO,	/* CF RESET */
-
-	/* UHC */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-	GPIO119_USBH2_PWR,
-	GPIO120_USBH2_PEN,
-
-	/* UDC */
-	GPIO41_GPIO,
-
-	/* Ethernet */
-	GPIO114_GPIO,	/* IRQ */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO95_AC97_nRESET,
-	GPIO98_AC97_SYSCLK,
-	GPIO113_GPIO,	/* TS IRQ */
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* IDE */
-	GPIO36_GPIO,	/* IDE IRQ */
-	GPIO80_DREQ_1,
-};
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition vpac270_nor_partitions[] = {
-	{
-		.name		= "Flash",
-		.offset		= 0x00000000,
-		.size		= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct physmap_flash_data vpac270_flash_data[] = {
-	{
-		.width		= 2,	/* bankwidth in bytes */
-		.parts		= vpac270_nor_partitions,
-		.nr_parts	= ARRAY_SIZE(vpac270_nor_partitions)
-	}
-};
-
-static struct resource vpac270_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_64M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device vpac270_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= &vpac270_flash_resource,
-	.num_resources	= 1,
-	.dev 		= {
-		.platform_data = vpac270_flash_data,
-	},
-};
-static void __init vpac270_nor_init(void)
-{
-	platform_device_register(&vpac270_flash);
-}
-#else
-static inline void vpac270_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * OneNAND Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_ONENAND) || defined(CONFIG_MTD_ONENAND_MODULE)
-static struct mtd_partition vpac270_onenand_partitions[] = {
-	{
-		.name		= "Flash",
-		.offset		= 0x00000000,
-		.size		= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct onenand_platform_data vpac270_onenand_info = {
-	.parts		= vpac270_onenand_partitions,
-	.nr_parts	= ARRAY_SIZE(vpac270_onenand_partitions),
-};
-
-static struct resource vpac270_onenand_resources[] = {
-	[0] = {
-		.start	= PXA_CS0_PHYS,
-		.end	= PXA_CS0_PHYS + SZ_1M,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device vpac270_onenand = {
-	.name		= "onenand-flash",
-	.id		= -1,
-	.resource	= vpac270_onenand_resources,
-	.num_resources	= ARRAY_SIZE(vpac270_onenand_resources),
-	.dev		= {
-		.platform_data	= &vpac270_onenand_info,
-	},
-};
-
-static void __init vpac270_onenand_init(void)
-{
-	platform_device_register(&vpac270_onenand);
-}
-#else
-static void __init vpac270_onenand_init(void) {}
-#endif
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data vpac270_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.detect_delay_ms	= 200,
-};
-
-static struct gpiod_lookup_table vpac270_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO53_VPAC270_SD_DETECT_N,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", GPIO52_VPAC270_SD_READONLY,
-			    "wp", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static void __init vpac270_mmc_init(void)
-{
-	gpiod_add_lookup_table(&vpac270_mci_gpio_table);
-	pxa_set_mci_info(&vpac270_mci_platform_data);
-}
-#else
-static inline void vpac270_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button vpac270_pxa_buttons[] = {
-	{KEY_POWER, GPIO1_VPAC270_USER_BTN, 0, "USER BTN"},
-};
-
-static struct gpio_keys_platform_data vpac270_pxa_keys_data = {
-	.buttons	= vpac270_pxa_buttons,
-	.nbuttons	= ARRAY_SIZE(vpac270_pxa_buttons),
-};
-
-static struct platform_device vpac270_pxa_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &vpac270_pxa_keys_data,
-	},
-};
-
-static void __init vpac270_keys_init(void)
-{
-	platform_device_register(&vpac270_pxa_keys);
-}
-#else
-static inline void vpac270_keys_init(void) {}
-#endif
-
-/******************************************************************************
- * LED
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-struct gpio_led vpac270_gpio_leds[] = {
-{
-	.name			= "vpac270:orange:user",
-	.default_trigger	= "none",
-	.gpio			= GPIO15_VPAC270_LED_ORANGE,
-	.active_low		= 1,
-}
-};
-
-static struct gpio_led_platform_data vpac270_gpio_led_info = {
-	.leds		= vpac270_gpio_leds,
-	.num_leds	= ARRAY_SIZE(vpac270_gpio_leds),
-};
-
-static struct platform_device vpac270_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &vpac270_gpio_led_info,
-	}
-};
-
-static void __init vpac270_leds_init(void)
-{
-	platform_device_register(&vpac270_leds);
-}
-#else
-static inline void vpac270_leds_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Host
- ******************************************************************************/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static int vpac270_ohci_init(struct device *dev)
-{
-	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
-	return 0;
-}
-
-static struct pxaohci_platform_data vpac270_ohci_info = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | ENABLE_PORT2 |
-			POWER_CONTROL_LOW | POWER_SENSE_LOW,
-	.init		= vpac270_ohci_init,
-};
-
-static void __init vpac270_uhc_init(void)
-{
-	pxa_set_ohci_info(&vpac270_ohci_info);
-}
-#else
-static inline void vpac270_uhc_init(void) {}
-#endif
-
-/******************************************************************************
- * USB Gadget
- ******************************************************************************/
-#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
-static struct gpiod_lookup_table vpac270_gpio_vbus_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO41_VPAC270_UDC_DETECT,
-			    "vbus", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device vpac270_gpio_vbus = {
-	.name	= "gpio-vbus",
-	.id	= -1,
-};
-
-static void vpac270_udc_command(int cmd)
-{
-	if (cmd == PXA2XX_UDC_CMD_CONNECT)
-		UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
-	else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
-		UP2OCR = UP2OCR_HXOE;
-}
-
-static struct pxa2xx_udc_mach_info vpac270_udc_info __initdata = {
-	.udc_command		= vpac270_udc_command,
-	.gpio_pullup		= -1,
-};
-
-static void __init vpac270_udc_init(void)
-{
-	pxa_set_udc_info(&vpac270_udc_info);
-	gpiod_add_lookup_table(&vpac270_gpio_vbus_gpiod_table);
-	platform_device_register(&vpac270_gpio_vbus);
-}
-#else
-static inline void vpac270_udc_init(void) {}
-#endif
-
-/******************************************************************************
- * Ethernet
- ******************************************************************************/
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-static struct resource vpac270_dm9000_resources[] = {
-	[0] = {
-		.start	= PXA_CS2_PHYS + 0x300,
-		.end	= PXA_CS2_PHYS + 0x303,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= PXA_CS2_PHYS + 0x304,
-		.end	= PXA_CS2_PHYS + 0x343,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= PXA_GPIO_TO_IRQ(GPIO114_VPAC270_ETH_IRQ),
-		.end	= PXA_GPIO_TO_IRQ(GPIO114_VPAC270_ETH_IRQ),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct dm9000_plat_data vpac270_dm9000_platdata = {
-	.flags		= DM9000_PLATF_32BITONLY,
-};
-
-static struct platform_device vpac270_dm9000_device = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(vpac270_dm9000_resources),
-	.resource	= vpac270_dm9000_resources,
-	.dev		= {
-		.platform_data = &vpac270_dm9000_platdata,
-	}
-};
-
-static void __init vpac270_eth_init(void)
-{
-	platform_device_register(&vpac270_dm9000_device);
-}
-#else
-static inline void vpac270_eth_init(void) {}
-#endif
-
-/******************************************************************************
- * Audio and Touchscreen
- ******************************************************************************/
-#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
-	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
-static pxa2xx_audio_ops_t vpac270_ac97_pdata = {
-	.reset_gpio	= 95,
-};
-
-static struct ucb1400_pdata vpac270_ucb1400_pdata = {
-	.irq		= PXA_GPIO_TO_IRQ(GPIO113_VPAC270_TS_IRQ),
-};
-
-static struct platform_device vpac270_ucb1400_device = {
-	.name		= "ucb1400_core",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &vpac270_ucb1400_pdata,
-	},
-};
-
-static void __init vpac270_ts_init(void)
-{
-	pxa_set_ac97_info(&vpac270_ac97_pdata);
-	platform_device_register(&vpac270_ucb1400_device);
-}
-#else
-static inline void vpac270_ts_init(void) {}
-#endif
-
-/******************************************************************************
- * RTC
- ******************************************************************************/
-#if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE)
-static struct i2c_board_info __initdata vpac270_i2c_devs[] = {
-	{
-		I2C_BOARD_INFO("ds1339", 0x68),
-	},
-};
-
-static void __init vpac270_rtc_init(void)
-{
-	i2c_register_board_info(0, ARRAY_AND_SIZE(vpac270_i2c_devs));
-}
-#else
-static inline void vpac270_rtc_init(void) {}
-#endif
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info vpac270_lcd_modes[] = {
-{
-	.pixclock	= 57692,
-	.xres		= 640,
-	.yres		= 480,
-	.bpp		= 32,
-	.depth		= 18,
-
-	.left_margin	= 144,
-	.right_margin	= 32,
-	.upper_margin	= 13,
-	.lower_margin	= 30,
-
-	.hsync_len	= 32,
-	.vsync_len	= 2,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-}, {	/* CRT 640x480 */
-	.pixclock	= 35000,
-	.xres		= 640,
-	.yres		= 480,
-	.bpp		= 16,
-	.depth		= 16,
-
-	.left_margin	= 96,
-	.right_margin	= 48,
-	.upper_margin	= 33,
-	.lower_margin	= 10,
-
-	.hsync_len	= 48,
-	.vsync_len	= 1,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-}, {	/* CRT 800x600 H=30kHz V=48HZ */
-	.pixclock	= 25000,
-	.xres		= 800,
-	.yres		= 600,
-	.bpp		= 16,
-	.depth		= 16,
-
-	.left_margin	= 50,
-	.right_margin	= 1,
-	.upper_margin	= 21,
-	.lower_margin	= 12,
-
-	.hsync_len	= 8,
-	.vsync_len	= 1,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-}, {	/* CRT 1024x768 H=40kHz V=50Hz */
-	.pixclock	= 15000,
-	.xres		= 1024,
-	.yres		= 768,
-	.bpp		= 16,
-	.depth		= 16,
-
-	.left_margin	= 220,
-	.right_margin	= 8,
-	.upper_margin	= 33,
-	.lower_margin	= 2,
-
-	.hsync_len	= 48,
-	.vsync_len	= 1,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-}
-};
-
-static struct pxafb_mach_info vpac270_lcd_screen = {
-	.modes		= vpac270_lcd_modes,
-	.num_modes	= ARRAY_SIZE(vpac270_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_18BPP,
-};
-
-static void vpac270_lcd_power(int on, struct fb_var_screeninfo *info)
-{
-	gpio_set_value(GPIO81_VPAC270_BKL_ON, on);
-}
-
-static void __init vpac270_lcd_init(void)
-{
-	int ret;
-
-	ret = gpio_request(GPIO81_VPAC270_BKL_ON, "BKL-ON");
-	if (ret) {
-		pr_err("Requesting BKL-ON GPIO failed!\n");
-		goto err;
-	}
-
-	ret = gpio_direction_output(GPIO81_VPAC270_BKL_ON, 1);
-	if (ret) {
-		pr_err("Setting BKL-ON GPIO direction failed!\n");
-		goto err2;
-	}
-
-	vpac270_lcd_screen.pxafb_lcd_power = vpac270_lcd_power;
-	pxa_set_fb_info(NULL, &vpac270_lcd_screen);
-	return;
-
-err2:
-	gpio_free(GPIO81_VPAC270_BKL_ON);
-err:
-	return;
-}
-#else
-static inline void vpac270_lcd_init(void) {}
-#endif
-
-/******************************************************************************
- * PATA IDE
- ******************************************************************************/
-#if defined(CONFIG_PATA_PXA) || defined(CONFIG_PATA_PXA_MODULE)
-static struct pata_pxa_pdata vpac270_pata_pdata = {
-	.reg_shift	= 1,
-	.dma_dreq	= 1,
-	.irq_flags	= IRQF_TRIGGER_RISING,
-};
-
-static struct resource vpac270_ide_resources[] = {
-	[0] = {	/* I/O Base address */
-	       .start	= PXA_CS3_PHYS + 0x120,
-	       .end	= PXA_CS3_PHYS + 0x13f,
-	       .flags	= IORESOURCE_MEM
-	},
-	[1] = {	/* CTL Base address */
-	       .start	= PXA_CS3_PHYS + 0x15c,
-	       .end	= PXA_CS3_PHYS + 0x15f,
-	       .flags	= IORESOURCE_MEM
-	},
-	[2] = {	/* DMA Base address */
-	       .start	= PXA_CS3_PHYS + 0x20,
-	       .end	= PXA_CS3_PHYS + 0x2f,
-	       .flags	= IORESOURCE_DMA
-	},
-	[3] = {	/* IDE IRQ pin */
-	       .start	= PXA_GPIO_TO_IRQ(GPIO36_VPAC270_IDE_IRQ),
-	       .end	= PXA_GPIO_TO_IRQ(GPIO36_VPAC270_IDE_IRQ),
-	       .flags	= IORESOURCE_IRQ
-	}
-};
-
-static struct platform_device vpac270_ide_device = {
-	.name		= "pata_pxa",
-	.num_resources	= ARRAY_SIZE(vpac270_ide_resources),
-	.resource	= vpac270_ide_resources,
-	.dev		= {
-		.platform_data	= &vpac270_pata_pdata,
-		.coherent_dma_mask	= 0xffffffff,
-	}
-};
-
-static void __init vpac270_ide_init(void)
-{
-	platform_device_register(&vpac270_ide_device);
-}
-#else
-static inline void vpac270_ide_init(void) {}
-#endif
-
-/******************************************************************************
- * Core power regulator
- ******************************************************************************/
-#if defined(CONFIG_REGULATOR_MAX1586) || \
-    defined(CONFIG_REGULATOR_MAX1586_MODULE)
-static struct regulator_consumer_supply vpac270_max1587a_consumers[] = {
-	REGULATOR_SUPPLY("vcc_core", NULL),
-};
-
-static struct regulator_init_data vpac270_max1587a_v3_info = {
-	.constraints = {
-		.name		= "vcc_core range",
-		.min_uV		= 900000,
-		.max_uV		= 1705000,
-		.always_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-	},
-	.consumer_supplies	= vpac270_max1587a_consumers,
-	.num_consumer_supplies	= ARRAY_SIZE(vpac270_max1587a_consumers),
-};
-
-static struct max1586_subdev_data vpac270_max1587a_subdevs[] = {
-	{
-		.name		= "vcc_core",
-		.id		= MAX1586_V3,
-		.platform_data	= &vpac270_max1587a_v3_info,
-	}
-};
-
-static struct max1586_platform_data vpac270_max1587a_info = {
-	.subdevs     = vpac270_max1587a_subdevs,
-	.num_subdevs = ARRAY_SIZE(vpac270_max1587a_subdevs),
-	.v3_gain     = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */
-};
-
-static struct i2c_board_info __initdata vpac270_pi2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("max1586", 0x14),
-		.platform_data	= &vpac270_max1587a_info,
-	},
-};
-
-static void __init vpac270_pmic_init(void)
-{
-	i2c_register_board_info(1, ARRAY_AND_SIZE(vpac270_pi2c_board_info));
-}
-#else
-static inline void vpac270_pmic_init(void) {}
-#endif
-
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init vpac270_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(vpac270_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	pxa_set_i2c_info(NULL);
-	pxa27x_set_i2c_power_info(NULL);
-
-	vpac270_pmic_init();
-	vpac270_lcd_init();
-	vpac270_mmc_init();
-	vpac270_nor_init();
-	vpac270_onenand_init();
-	vpac270_leds_init();
-	vpac270_keys_init();
-	vpac270_uhc_init();
-	vpac270_udc_init();
-	vpac270_eth_init();
-	vpac270_ts_init();
-	vpac270_rtc_init();
-	vpac270_ide_init();
-
-	regulator_has_full_constraints();
-}
-
-MACHINE_START(VPAC270, "Voipac PXA270")
-	.atag_offset	= 0x100,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= vpac270_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/vpac270.h b/arch/arm/mach-pxa/vpac270.h
deleted file mode 100644
index 0cd094d8c553..000000000000
--- a/arch/arm/mach-pxa/vpac270.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * GPIOs and interrupts for Voipac PXA270
- *
- * Copyright (C) 2010
- * Marek Vasut <marek.vasut@gmail.com>
- */
-
-#ifndef _INCLUDE_VPAC270_H_
-#define _INCLUDE_VPAC270_H_
-
-#define	GPIO1_VPAC270_USER_BTN		1
-
-#define	GPIO15_VPAC270_LED_ORANGE	15
-
-#define	GPIO81_VPAC270_BKL_ON		81
-#define	GPIO83_VPAC270_NL_ON		83
-
-#define	GPIO52_VPAC270_SD_READONLY	52
-#define	GPIO53_VPAC270_SD_DETECT_N	53
-
-#define	GPIO84_VPAC270_PCMCIA_CD	84
-#define	GPIO35_VPAC270_PCMCIA_RDY	35
-#define	GPIO107_VPAC270_PCMCIA_PPEN	107
-#define	GPIO11_VPAC270_PCMCIA_RESET	11
-#define	GPIO17_VPAC270_CF_CD		17
-#define	GPIO12_VPAC270_CF_RDY		12
-#define	GPIO16_VPAC270_CF_RESET		16
-
-#define	GPIO41_VPAC270_UDC_DETECT	41
-
-#define	GPIO114_VPAC270_ETH_IRQ		114
-
-#define	GPIO36_VPAC270_IDE_IRQ		36
-
-#define	GPIO113_VPAC270_TS_IRQ		113
-
-#endif
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
deleted file mode 100644
index 6bb02b65fb82..000000000000
--- a/arch/arm/mach-pxa/xcep.c
+++ /dev/null
@@ -1,190 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*  linux/arch/arm/mach-pxa/xcep.c
- *
- *  Support for the Iskratel Electronics XCEP platform as used in
- *  the Libera instruments from Instrumentation Technologies.
- *
- *  Author:     Ales Bardorfer <ales@i-tech.si>
- *  Contributions by: Abbott, MG (Michael) <michael.abbott@diamond.ac.uk>
- *  Contributions by: Matej Kenda <matej.kenda@i-tech.si>
- *  Created:    June 2006
- *  Copyright:  (C) 2006-2009 Instrumentation Technologies
- */
-
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/smc91x.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-#include "pxa25x.h"
-#include "addr-map.h"
-#include "smemc.h"
-
-#include "generic.h"
-#include "devices.h"
-
-#define XCEP_ETH_PHYS		(PXA_CS3_PHYS + 0x00000300)
-#define XCEP_ETH_PHYS_END	(PXA_CS3_PHYS + 0x000fffff)
-#define XCEP_ETH_ATTR		(PXA_CS3_PHYS + 0x02000000)
-#define XCEP_ETH_ATTR_END	(PXA_CS3_PHYS + 0x020fffff)
-#define XCEP_ETH_IRQ		IRQ_GPIO0
-
-/*  XCEP CPLD base */
-#define XCEP_CPLD_BASE		0xf0000000
-
-
-/* Flash partitions. */
-
-static struct mtd_partition xcep_partitions[] = {
-	{
-		.name =		"Bootloader",
-		.size =		0x00040000,
-		.offset =	0,
-		.mask_flags =	MTD_WRITEABLE
-	}, {
-		.name =		"Bootloader ENV",
-		.size =		0x00040000,
-		.offset =	0x00040000,
-		.mask_flags =	MTD_WRITEABLE
-	}, {
-		.name =		"Kernel",
-		.size =		0x00100000,
-		.offset =	0x00080000,
-	}, {
-		.name =		"Rescue fs",
-		.size =		0x00280000,
-		.offset =	0x00180000,
-	}, {
-		.name =		"Filesystem",
-		.size =		MTDPART_SIZ_FULL,
-		.offset =	0x00400000
-	}
-};
-
-static struct physmap_flash_data xcep_flash_data[] = {
-	{
-		.width		= 4,		/* bankwidth in bytes */
-		.parts		= xcep_partitions,
-		.nr_parts	= ARRAY_SIZE(xcep_partitions)
-	}
-};
-
-static struct resource flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_32M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.dev 	= {
-		.platform_data = xcep_flash_data,
-	},
-	.resource = &flash_resource,
-	.num_resources = 1,
-};
-
-
-
-/* SMC LAN91C111 network controller. */
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.name	= "smc91x-regs",
-		.start	= XCEP_ETH_PHYS,
-		.end	= XCEP_ETH_PHYS_END,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= XCEP_ETH_IRQ,
-		.end	= XCEP_ETH_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.name	= "smc91x-attrib",
-		.start	= XCEP_ETH_ATTR,
-		.end	= XCEP_ETH_ATTR_END,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct smc91x_platdata xcep_smc91x_info = {
-	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
-		  SMC91X_NOWAIT | SMC91X_USE_DMA,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &xcep_smc91x_info,
-	},
-};
-
-
-static struct platform_device *devices[] __initdata = {
-	&flash_device,
-	&smc91x_device,
-};
-
-
-/* We have to state that there are HWMON devices on the I2C bus on XCEP.
- * Drivers for HWMON verify capabilities of the adapter when loading and
- * refuse to attach if the adapter doesn't support HWMON class of devices. */
-static struct i2c_pxa_platform_data xcep_i2c_platform_data  = {
-	.class = I2C_CLASS_HWMON
-};
-
-
-static mfp_cfg_t xcep_pin_config[] __initdata = {
-	GPIO79_nCS_3,	/* SMC 91C111 chip select. */
-	GPIO80_nCS_4,	/* CPLD chip select. */
-	/* SSP communication to MSP430 */
-	GPIO23_SSP1_SCLK,
-	GPIO24_SSP1_SFRM,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-	GPIO27_SSP1_EXTCLK
-};
-
-static void __init xcep_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(xcep_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-	pxa_set_hwuart_info(NULL);
-
-	/* See Intel XScale Developer's Guide for details */
-	/* Set RDF and RDN to appropriate values (chip select 3 (smc91x)) */
-	__raw_writel((__raw_readl(MSC1) & 0xffff) | 0xD5540000, MSC1);
-	/* Set RDF and RDN to appropriate values (chip select 5 (fpga)) */
-	__raw_writel((__raw_readl(MSC2) & 0xffff) | 0x72A00000, MSC2);
-
-	platform_add_devices(ARRAY_AND_SIZE(devices));
-	pxa_set_i2c_info(&xcep_i2c_platform_data);
-}
-
-MACHINE_START(XCEP, "Iskratel XCEP")
-	.atag_offset	= 0x100,
-	.init_machine	= xcep_init,
-	.map_io		= pxa25x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa25x_init_irq,
-	.handle_irq	= pxa25x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
deleted file mode 100644
index c4d4162a7e6e..000000000000
--- a/arch/arm/mach-pxa/z2.c
+++ /dev/null
@@ -1,781 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/z2.c
- *
- *  Support for the Zipit Z2 Handheld device.
- *
- *  Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com>
- *
- *  Based on research and code by: Ken McGuire
- *  Based on mainstone.c as modified for the Zipit Z2.
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/z2_battery.h>
-#include <linux/dma-mapping.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/spi/libertas_spi.h>
-#include <linux/power_supply.h>
-#include <linux/mtd/physmap.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio_keys.h>
-#include <linux/delay.h>
-#include <linux/regulator/machine.h>
-#include <linux/platform_data/i2c-pxa.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "pxa27x.h"
-#include "mfp-pxa27x.h"
-#include "z2.h"
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include "pm.h"
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long z2_pin_config[] = {
-
-	/* LCD - 16bpp Active TFT */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-	GPIO77_LCD_BIAS,
-	GPIO19_GPIO,		/* LCD reset */
-	GPIO88_GPIO,		/* LCD chipselect */
-
-	/* PWM */
-	GPIO115_PWM1_OUT,	/* Keypad Backlight */
-	GPIO11_PWM2_OUT,	/* LCD Backlight */
-
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO112_MMC_CMD,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO96_GPIO,		/* SD detect */
-
-	/* STUART */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* Keypad */
-	GPIO100_KP_MKIN_0,
-	GPIO101_KP_MKIN_1,
-	GPIO102_KP_MKIN_2,
-	GPIO34_KP_MKIN_3,
-	GPIO38_KP_MKIN_4,
-	GPIO16_KP_MKIN_5,
-	GPIO17_KP_MKIN_6,
-	GPIO103_KP_MKOUT_0,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-	GPIO35_KP_MKOUT_6,
-	GPIO41_KP_MKOUT_7,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* SSP1 */
-	GPIO23_SSP1_SCLK,	/* SSP1_SCK */
-	GPIO25_SSP1_TXD,	/* SSP1_TXD */
-	GPIO26_SSP1_RXD,	/* SSP1_RXD */
-
-	/* SSP2 */
-	GPIO22_SSP2_SCLK,	/* SSP2_SCK */
-	GPIO13_SSP2_TXD,	/* SSP2_TXD */
-	GPIO40_SSP2_RXD,	/* SSP2_RXD */
-
-	/* LEDs */
-	GPIO10_GPIO,		/* WiFi LED */
-	GPIO83_GPIO,		/* Charging LED */
-	GPIO85_GPIO,		/* Charged LED */
-
-	/* I2S */
-	GPIO28_I2S_BITCLK_OUT,
-	GPIO29_I2S_SDATA_IN,
-	GPIO30_I2S_SDATA_OUT,
-	GPIO31_I2S_SYNC,
-	GPIO113_I2S_SYSCLK,
-
-	/* MISC */
-	GPIO0_GPIO,		/* AC power detect */
-	GPIO1_GPIO,		/* Power button */
-	GPIO37_GPIO,		/* Headphone detect */
-	GPIO98_GPIO,		/* Lid switch */
-	GPIO14_GPIO,		/* WiFi Power */
-	GPIO24_GPIO,		/* WiFi CS */
-	GPIO36_GPIO,		/* WiFi IRQ */
-	GPIO88_GPIO,		/* LCD CS */
-};
-
-/******************************************************************************
- * NOR Flash
- ******************************************************************************/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct resource z2_flash_resource = {
-	.start	= PXA_CS0_PHYS,
-	.end	= PXA_CS0_PHYS + SZ_8M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct mtd_partition z2_flash_parts[] = {
-	{
-		.name	= "U-Boot Bootloader",
-		.offset	= 0x0,
-		.size	= 0x40000,
-	}, {
-		.name	= "U-Boot Environment",
-		.offset	= 0x40000,
-		.size	= 0x20000,
-	}, {
-		.name	= "Flash",
-		.offset	= 0x60000,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data z2_flash_data = {
-	.width		= 2,
-	.parts		= z2_flash_parts,
-	.nr_parts	= ARRAY_SIZE(z2_flash_parts),
-};
-
-static struct platform_device z2_flash = {
-	.name		= "physmap-flash",
-	.id		= -1,
-	.resource	= &z2_flash_resource,
-	.num_resources	= 1,
-	.dev = {
-		.platform_data	= &z2_flash_data,
-	},
-};
-
-static void __init z2_nor_init(void)
-{
-	platform_device_register(&z2_flash);
-}
-#else
-static inline void z2_nor_init(void) {}
-#endif
-
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
-static struct pwm_lookup z2_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight.0", NULL, 1260320,
-		   PWM_POLARITY_NORMAL),
-	PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.1", NULL, 1260320,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data z2_backlight_data[] = {
-	[0] = {
-		/* Keypad Backlight */
-		.max_brightness	= 1023,
-		.dft_brightness	= 0,
-	},
-	[1] = {
-		/* LCD Backlight */
-		.max_brightness	= 1023,
-		.dft_brightness	= 512,
-	},
-};
-
-static struct platform_device z2_backlight_devices[2] = {
-	{
-		.name	= "pwm-backlight",
-		.id	= 0,
-		.dev	= {
-			.platform_data	= &z2_backlight_data[1],
-		},
-	},
-	{
-		.name	= "pwm-backlight",
-		.id	= 1,
-		.dev	= {
-			.platform_data	= &z2_backlight_data[0],
-		},
-	},
-};
-static void __init z2_pwm_init(void)
-{
-	pwm_add_table(z2_pwm_lookup, ARRAY_SIZE(z2_pwm_lookup));
-	platform_device_register(&z2_backlight_devices[0]);
-	platform_device_register(&z2_backlight_devices[1]);
-}
-#else
-static inline void z2_pwm_init(void) {}
-#endif
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pxafb_mode_info z2_lcd_modes[] = {
-{
-	.pixclock	= 192000,
-	.xres		= 240,
-	.yres		= 320,
-	.bpp		= 16,
-
-	.left_margin	= 4,
-	.right_margin	= 8,
-	.upper_margin	= 4,
-	.lower_margin	= 8,
-
-	.hsync_len	= 4,
-	.vsync_len	= 4,
-},
-};
-
-static struct pxafb_mach_info z2_lcd_screen = {
-	.modes		= z2_lcd_modes,
-	.num_modes      = ARRAY_SIZE(z2_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_BIAS_ACTIVE_LOW |
-			  LCD_ALTERNATE_MAPPING,
-};
-
-static void __init z2_lcd_init(void)
-{
-	pxa_set_fb_info(NULL, &z2_lcd_screen);
-}
-#else
-static inline void z2_lcd_init(void) {}
-#endif
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data z2_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.detect_delay_ms	= 200,
-};
-
-static struct gpiod_lookup_table z2_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO96_ZIPITZ2_SD_DETECT,
-			    "cd", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static void __init z2_mmc_init(void)
-{
-	gpiod_add_lookup_table(&z2_mci_gpio_table);
-	pxa_set_mci_info(&z2_mci_platform_data);
-}
-#else
-static inline void z2_mmc_init(void) {}
-#endif
-
-/******************************************************************************
- * LEDs
- ******************************************************************************/
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-struct gpio_led z2_gpio_leds[] = {
-{
-	.name			= "z2:green:wifi",
-	.default_trigger	= "none",
-	.gpio			= GPIO10_ZIPITZ2_LED_WIFI,
-	.active_low		= 1,
-}, {
-	.name			= "z2:green:charged",
-	.default_trigger	= "mmc0",
-	.gpio			= GPIO85_ZIPITZ2_LED_CHARGED,
-	.active_low		= 1,
-}, {
-	.name			= "z2:amber:charging",
-	.default_trigger	= "Z2-charging-or-full",
-	.gpio			= GPIO83_ZIPITZ2_LED_CHARGING,
-	.active_low		= 1,
-},
-};
-
-static struct gpio_led_platform_data z2_gpio_led_info = {
-	.leds		= z2_gpio_leds,
-	.num_leds	= ARRAY_SIZE(z2_gpio_leds),
-};
-
-static struct platform_device z2_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &z2_gpio_led_info,
-	}
-};
-
-static void __init z2_leds_init(void)
-{
-	platform_device_register(&z2_leds);
-}
-#else
-static inline void z2_leds_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static const unsigned int z2_matrix_keys[] = {
-	KEY(0, 0, KEY_OPTION),
-	KEY(1, 0, KEY_UP),
-	KEY(2, 0, KEY_DOWN),
-	KEY(3, 0, KEY_LEFT),
-	KEY(4, 0, KEY_RIGHT),
-	KEY(5, 0, KEY_END),
-	KEY(6, 0, KEY_KPPLUS),
-
-	KEY(0, 1, KEY_HOME),
-	KEY(1, 1, KEY_Q),
-	KEY(2, 1, KEY_I),
-	KEY(3, 1, KEY_G),
-	KEY(4, 1, KEY_X),
-	KEY(5, 1, KEY_ENTER),
-	KEY(6, 1, KEY_KPMINUS),
-
-	KEY(0, 2, KEY_PAGEUP),
-	KEY(1, 2, KEY_W),
-	KEY(2, 2, KEY_O),
-	KEY(3, 2, KEY_H),
-	KEY(4, 2, KEY_C),
-	KEY(5, 2, KEY_LEFTALT),
-
-	KEY(0, 3, KEY_PAGEDOWN),
-	KEY(1, 3, KEY_E),
-	KEY(2, 3, KEY_P),
-	KEY(3, 3, KEY_J),
-	KEY(4, 3, KEY_V),
-	KEY(5, 3, KEY_LEFTSHIFT),
-
-	KEY(0, 4, KEY_ESC),
-	KEY(1, 4, KEY_R),
-	KEY(2, 4, KEY_A),
-	KEY(3, 4, KEY_K),
-	KEY(4, 4, KEY_B),
-	KEY(5, 4, KEY_LEFTCTRL),
-
-	KEY(0, 5, KEY_TAB),
-	KEY(1, 5, KEY_T),
-	KEY(2, 5, KEY_S),
-	KEY(3, 5, KEY_L),
-	KEY(4, 5, KEY_N),
-	KEY(5, 5, KEY_SPACE),
-
-	KEY(0, 6, KEY_STOPCD),
-	KEY(1, 6, KEY_Y),
-	KEY(2, 6, KEY_D),
-	KEY(3, 6, KEY_BACKSPACE),
-	KEY(4, 6, KEY_M),
-	KEY(5, 6, KEY_COMMA),
-
-	KEY(0, 7, KEY_PLAYCD),
-	KEY(1, 7, KEY_U),
-	KEY(2, 7, KEY_F),
-	KEY(3, 7, KEY_Z),
-	KEY(4, 7, KEY_SEMICOLON),
-	KEY(5, 7, KEY_DOT),
-};
-
-static struct matrix_keymap_data z2_matrix_keymap_data = {
-	.keymap			= z2_matrix_keys,
-	.keymap_size		= ARRAY_SIZE(z2_matrix_keys),
-};
-
-static struct pxa27x_keypad_platform_data z2_keypad_platform_data = {
-	.matrix_key_rows	= 7,
-	.matrix_key_cols	= 8,
-	.matrix_keymap_data	= &z2_matrix_keymap_data,
-
-	.debounce_interval	= 30,
-};
-
-static void __init z2_mkp_init(void)
-{
-	pxa_set_keypad_info(&z2_keypad_platform_data);
-}
-#else
-static inline void z2_mkp_init(void) {}
-#endif
-
-/******************************************************************************
- * GPIO keys
- ******************************************************************************/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button z2_pxa_buttons[] = {
-	{
-		.code		= KEY_POWER,
-		.gpio		= GPIO1_ZIPITZ2_POWER_BUTTON,
-		.active_low	= 0,
-		.desc		= "Power Button",
-		.wakeup		= 1,
-		.type		= EV_KEY,
-	},
-	{
-		.code		= SW_LID,
-		.gpio		= GPIO98_ZIPITZ2_LID_BUTTON,
-		.active_low	= 1,
-		.desc		= "Lid Switch",
-		.wakeup		= 0,
-		.type		= EV_SW,
-	},
-};
-
-static struct gpio_keys_platform_data z2_pxa_keys_data = {
-	.buttons	= z2_pxa_buttons,
-	.nbuttons	= ARRAY_SIZE(z2_pxa_buttons),
-};
-
-static struct platform_device z2_pxa_keys = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &z2_pxa_keys_data,
-	},
-};
-
-static void __init z2_keys_init(void)
-{
-	platform_device_register(&z2_pxa_keys);
-}
-#else
-static inline void z2_keys_init(void) {}
-#endif
-
-/******************************************************************************
- * Battery
- ******************************************************************************/
-#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
-static struct z2_battery_info batt_chip_info = {
-	.batt_I2C_bus	= 0,
-	.batt_I2C_addr	= 0x55,
-	.batt_I2C_reg	= 2,
-	.min_voltage	= 3475000,
-	.max_voltage	= 4190000,
-	.batt_div	= 59,
-	.batt_mult	= 1000000,
-	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LION,
-	.batt_name	= "Z2",
-};
-
-static struct gpiod_lookup_table z2_battery_gpio_table = {
-	.dev_id = "aer915",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO0_ZIPITZ2_AC_DETECT,
-			    NULL, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct i2c_board_info __initdata z2_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("aer915", 0x55),
-		.dev_name = "aer915",
-		.platform_data	= &batt_chip_info,
-	}, {
-		I2C_BOARD_INFO("wm8750", 0x1b),
-	},
-
-};
-
-static void __init z2_i2c_init(void)
-{
-	pxa_set_i2c_info(NULL);
-	gpiod_add_lookup_table(&z2_battery_gpio_table);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(z2_i2c_board_info));
-}
-#else
-static inline void z2_i2c_init(void) {}
-#endif
-
-/******************************************************************************
- * SSP Devices - WiFi and LCD control
- ******************************************************************************/
-#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-/* WiFi */
-static int z2_lbs_spi_setup(struct spi_device *spi)
-{
-	int ret = 0;
-
-	ret = gpio_request(GPIO14_ZIPITZ2_WIFI_POWER, "WiFi Power");
-	if (ret)
-		goto err;
-
-	ret = gpio_direction_output(GPIO14_ZIPITZ2_WIFI_POWER, 1);
-	if (ret)
-		goto err2;
-
-	/* Wait until card is powered on */
-	mdelay(180);
-
-	spi->bits_per_word = 16;
-	spi->mode = SPI_MODE_2,
-
-	spi_setup(spi);
-
-	return 0;
-
-err2:
-	gpio_free(GPIO14_ZIPITZ2_WIFI_POWER);
-err:
-	return ret;
-};
-
-static int z2_lbs_spi_teardown(struct spi_device *spi)
-{
-	gpio_set_value(GPIO14_ZIPITZ2_WIFI_POWER, 0);
-	gpio_free(GPIO14_ZIPITZ2_WIFI_POWER);
-
-	return 0;
-};
-
-static struct pxa2xx_spi_chip z2_lbs_chip_info = {
-	.rx_threshold	= 8,
-	.tx_threshold	= 8,
-	.timeout	= 1000,
-};
-
-static struct libertas_spi_platform_data z2_lbs_pdata = {
-	.use_dummy_writes	= 1,
-	.setup			= z2_lbs_spi_setup,
-	.teardown		= z2_lbs_spi_teardown,
-};
-
-/* LCD */
-static struct pxa2xx_spi_chip lms283_chip_info = {
-	.rx_threshold	= 1,
-	.tx_threshold	= 1,
-	.timeout	= 64,
-};
-
-static struct gpiod_lookup_table lms283_gpio_table = {
-	.dev_id = "spi2.0", /* SPI bus 2 chip select 0 */
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO19_ZIPITZ2_LCD_RESET,
-			    "reset", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-{
-	.modalias		= "libertas_spi",
-	.platform_data		= &z2_lbs_pdata,
-	.controller_data	= &z2_lbs_chip_info,
-	.irq			= PXA_GPIO_TO_IRQ(GPIO36_ZIPITZ2_WIFI_IRQ),
-	.max_speed_hz		= 13000000,
-	.bus_num		= 1,
-	.chip_select		= 0,
-},
-{
-	.modalias		= "lms283gf05",
-	.controller_data	= &lms283_chip_info,
-	.max_speed_hz		= 400000,
-	.bus_num		= 2,
-	.chip_select		= 0,
-},
-};
-
-static struct pxa2xx_spi_controller pxa_ssp1_master_info = {
-	.num_chipselect	= 1,
-	.enable_dma	= 1,
-};
-
-static struct pxa2xx_spi_controller pxa_ssp2_master_info = {
-	.num_chipselect	= 1,
-};
-
-static struct gpiod_lookup_table pxa_ssp1_gpio_table = {
-	.dev_id = "spi1",
-	.table = {
-		GPIO_LOOKUP_IDX("gpio-pxa", GPIO24_ZIPITZ2_WIFI_CS, "cs", 0, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table pxa_ssp2_gpio_table = {
-	.dev_id = "spi2",
-	.table = {
-		GPIO_LOOKUP_IDX("gpio-pxa", GPIO88_ZIPITZ2_LCD_CS, "cs", 0, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static void __init z2_spi_init(void)
-{
-	gpiod_add_lookup_table(&pxa_ssp1_gpio_table);
-	gpiod_add_lookup_table(&pxa_ssp2_gpio_table);
-	pxa2xx_set_spi_info(1, &pxa_ssp1_master_info);
-	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
-	gpiod_add_lookup_table(&lms283_gpio_table);
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-}
-#else
-static inline void z2_spi_init(void) {}
-#endif
-
-static struct gpiod_lookup_table z2_audio_gpio_table = {
-	.dev_id = "soc-audio",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO37_ZIPITZ2_HEADSET_DETECT,
-			    "hsdet-gpio", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/******************************************************************************
- * Core power regulator
- ******************************************************************************/
-#if defined(CONFIG_REGULATOR_TPS65023) || \
-	defined(CONFIG_REGULATOR_TPS65023_MODULE)
-static struct regulator_consumer_supply z2_tps65021_consumers[] = {
-	REGULATOR_SUPPLY("vcc_core", NULL),
-};
-
-static struct regulator_init_data z2_tps65021_info[] = {
-	{
-		.constraints = {
-			.name		= "vcc_core range",
-			.min_uV		= 800000,
-			.max_uV		= 1600000,
-			.always_on	= 1,
-			.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-		},
-		.consumer_supplies	= z2_tps65021_consumers,
-		.num_consumer_supplies	= ARRAY_SIZE(z2_tps65021_consumers),
-	}, {
-		.constraints = {
-			.name		= "DCDC2",
-			.min_uV		= 3300000,
-			.max_uV		= 3300000,
-			.always_on	= 1,
-		},
-	}, {
-		.constraints = {
-			.name		= "DCDC3",
-			.min_uV		= 1800000,
-			.max_uV		= 1800000,
-			.always_on	= 1,
-		},
-	}, {
-		.constraints = {
-			.name		= "LDO1",
-			.min_uV		= 1000000,
-			.max_uV		= 3150000,
-			.always_on	= 1,
-		},
-	}, {
-		.constraints = {
-			.name		= "LDO2",
-			.min_uV		= 1050000,
-			.max_uV		= 3300000,
-			.always_on	= 1,
-		},
-	}
-};
-
-static struct i2c_board_info __initdata z2_pi2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("tps65021", 0x48),
-		.platform_data	= &z2_tps65021_info,
-	},
-};
-
-static void __init z2_pmic_init(void)
-{
-	pxa27x_set_i2c_power_info(NULL);
-	i2c_register_board_info(1, ARRAY_AND_SIZE(z2_pi2c_board_info));
-}
-#else
-static inline void z2_pmic_init(void) {}
-#endif
-
-#ifdef CONFIG_PM
-static void z2_power_off(void)
-{
-	/* We're using deep sleep as poweroff, so clear PSPR to ensure that
-	 * bootloader will jump to its entry point in resume handler
-	 */
-	PSPR = 0x0;
-	local_irq_disable();
-	pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
-	pxa27x_cpu_pm_enter(PM_SUSPEND_MEM);
-}
-#else
-#define z2_power_off   NULL
-#endif
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static void __init z2_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(z2_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	z2_lcd_init();
-	z2_mmc_init();
-	z2_mkp_init();
-	z2_i2c_init();
-	z2_spi_init();
-	z2_nor_init();
-	z2_pwm_init();
-	z2_leds_init();
-	z2_keys_init();
-	z2_pmic_init();
-
-	gpiod_add_lookup_table(&z2_audio_gpio_table);
-
-	pm_power_off = z2_power_off;
-}
-
-MACHINE_START(ZIPIT2, "Zipit Z2")
-	.atag_offset	= 0x100,
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= z2_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/z2.h b/arch/arm/mach-pxa/z2.h
deleted file mode 100644
index a78b2e28b1db..000000000000
--- a/arch/arm/mach-pxa/z2.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  arch/arm/mach-pxa/include/mach/z2.h
- *
- *  Author: Ken McGuire
- *  Created: Feb 6, 2009
- */
-
-#ifndef ASM_ARCH_ZIPIT2_H
-#define ASM_ARCH_ZIPIT2_H
-
-/* LEDs */
-#define	GPIO10_ZIPITZ2_LED_WIFI		10
-#define	GPIO85_ZIPITZ2_LED_CHARGED	85
-#define	GPIO83_ZIPITZ2_LED_CHARGING	83
-
-/* SD/MMC */
-#define	GPIO96_ZIPITZ2_SD_DETECT	96
-
-/* GPIO Buttons */
-#define	GPIO1_ZIPITZ2_POWER_BUTTON	1
-#define	GPIO98_ZIPITZ2_LID_BUTTON	98
-
-/* Libertas GSPI8686 WiFi */
-#define	GPIO14_ZIPITZ2_WIFI_POWER	14
-#define	GPIO24_ZIPITZ2_WIFI_CS		24
-#define	GPIO36_ZIPITZ2_WIFI_IRQ		36
-
-/* LCD */
-#define	GPIO19_ZIPITZ2_LCD_RESET	19
-#define	GPIO88_ZIPITZ2_LCD_CS		88
-
-/* MISC GPIOs */
-#define	GPIO0_ZIPITZ2_AC_DETECT		0
-#define GPIO37_ZIPITZ2_HEADSET_DETECT	37
-
-#endif
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
deleted file mode 100644
index ff0d8bb9f557..000000000000
--- a/arch/arm/mach-pxa/zeus.c
+++ /dev/null
@@ -1,974 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  Support for the Arcom ZEUS.
- *
- *  Copyright (C) 2006 Arcom Control Systems Ltd.
- *
- *  Loosely based on Arcom's 2.6.16.28.
- *  Maintained by Marc Zyngier <maz@misterjones.org>
- */
-
-#include <linux/cpufreq.h>
-#include <linux/interrupt.h>
-#include <linux/leds.h>
-#include <linux/irq.h>
-#include <linux/pm.h>
-#include <linux/property.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/serial_8250.h>
-#include <linux/dm9000.h>
-#include <linux/mmc/host.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/apm-emulation.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-
-#include <asm/mach-types.h>
-#include <asm/suspend.h>
-#include <asm/system_info.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "pxa27x.h"
-#include "devices.h"
-#include "regs-uart.h"
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include "pxa27x-udc.h"
-#include "udc.h"
-#include <linux/platform_data/video-pxafb.h>
-#include "pm.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include "viper-pcmcia.h"
-#include "zeus.h"
-#include "smemc.h"
-
-#include "generic.h"
-
-/*
- * Interrupt handling
- */
-
-static unsigned long zeus_irq_enabled_mask;
-static const int zeus_isa_irqs[] = { 3, 4, 5, 6, 7, 10, 11, 12, };
-static const int zeus_isa_irq_map[] = {
-	0,		/* ISA irq #0, invalid */
-	0,		/* ISA irq #1, invalid */
-	0,		/* ISA irq #2, invalid */
-	1 << 0,		/* ISA irq #3 */
-	1 << 1,		/* ISA irq #4 */
-	1 << 2,		/* ISA irq #5 */
-	1 << 3,		/* ISA irq #6 */
-	1 << 4,		/* ISA irq #7 */
-	0,		/* ISA irq #8, invalid */
-	0,		/* ISA irq #9, invalid */
-	1 << 5,		/* ISA irq #10 */
-	1 << 6,		/* ISA irq #11 */
-	1 << 7,		/* ISA irq #12 */
-};
-
-static inline int zeus_irq_to_bitmask(unsigned int irq)
-{
-	return zeus_isa_irq_map[irq - PXA_ISA_IRQ(0)];
-}
-
-static inline int zeus_bit_to_irq(int bit)
-{
-	return zeus_isa_irqs[bit] + PXA_ISA_IRQ(0);
-}
-
-static void zeus_ack_irq(struct irq_data *d)
-{
-	__raw_writew(zeus_irq_to_bitmask(d->irq), ZEUS_CPLD_ISA_IRQ);
-}
-
-static void zeus_mask_irq(struct irq_data *d)
-{
-	zeus_irq_enabled_mask &= ~(zeus_irq_to_bitmask(d->irq));
-}
-
-static void zeus_unmask_irq(struct irq_data *d)
-{
-	zeus_irq_enabled_mask |= zeus_irq_to_bitmask(d->irq);
-}
-
-static inline unsigned long zeus_irq_pending(void)
-{
-	return __raw_readw(ZEUS_CPLD_ISA_IRQ) & zeus_irq_enabled_mask;
-}
-
-static void zeus_irq_handler(struct irq_desc *desc)
-{
-	unsigned int irq;
-	unsigned long pending;
-
-	pending = zeus_irq_pending();
-	do {
-		/* we're in a chained irq handler,
-		 * so ack the interrupt by hand */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-
-		if (likely(pending)) {
-			irq = zeus_bit_to_irq(__ffs(pending));
-			generic_handle_irq(irq);
-		}
-		pending = zeus_irq_pending();
-	} while (pending);
-}
-
-static struct irq_chip zeus_irq_chip = {
-	.name		= "ISA",
-	.irq_ack	= zeus_ack_irq,
-	.irq_mask	= zeus_mask_irq,
-	.irq_unmask	= zeus_unmask_irq,
-};
-
-static void __init zeus_init_irq(void)
-{
-	int level;
-	int isa_irq;
-
-	pxa27x_init_irq();
-
-	/* Peripheral IRQs. It would be nice to move those inside driver
-	   configuration, but it is not supported at the moment. */
-	irq_set_irq_type(gpio_to_irq(ZEUS_AC97_GPIO), IRQ_TYPE_EDGE_RISING);
-	irq_set_irq_type(gpio_to_irq(ZEUS_WAKEUP_GPIO), IRQ_TYPE_EDGE_RISING);
-	irq_set_irq_type(gpio_to_irq(ZEUS_PTT_GPIO), IRQ_TYPE_EDGE_RISING);
-	irq_set_irq_type(gpio_to_irq(ZEUS_EXTGPIO_GPIO),
-			 IRQ_TYPE_EDGE_FALLING);
-	irq_set_irq_type(gpio_to_irq(ZEUS_CAN_GPIO), IRQ_TYPE_EDGE_FALLING);
-
-	/* Setup ISA IRQs */
-	for (level = 0; level < ARRAY_SIZE(zeus_isa_irqs); level++) {
-		isa_irq = zeus_bit_to_irq(level);
-		irq_set_chip_and_handler(isa_irq, &zeus_irq_chip,
-					 handle_edge_irq);
-		irq_clear_status_flags(isa_irq, IRQ_NOREQUEST | IRQ_NOPROBE);
-	}
-
-	irq_set_irq_type(gpio_to_irq(ZEUS_ISA_GPIO), IRQ_TYPE_EDGE_RISING);
-	irq_set_chained_handler(gpio_to_irq(ZEUS_ISA_GPIO), zeus_irq_handler);
-}
-
-
-/*
- * Platform devices
- */
-
-/* Flash */
-static struct resource zeus_mtd_resources[] = {
-	[0] = { /* NOR Flash (up to 64MB) */
-		.start	= ZEUS_FLASH_PHYS,
-		.end	= ZEUS_FLASH_PHYS + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = { /* SRAM */
-		.start	= ZEUS_SRAM_PHYS,
-		.end	= ZEUS_SRAM_PHYS + SZ_512K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct physmap_flash_data zeus_flash_data[] = {
-	[0] = {
-		.width		= 2,
-		.parts		= NULL,
-		.nr_parts	= 0,
-	},
-};
-
-static struct platform_device zeus_mtd_devices[] = {
-	[0] = {
-		.name		= "physmap-flash",
-		.id		= 0,
-		.dev		= {
-			.platform_data = &zeus_flash_data[0],
-		},
-		.resource	= &zeus_mtd_resources[0],
-		.num_resources	= 1,
-	},
-};
-
-/* Serial */
-static struct resource zeus_serial_resources[] = {
-	{
-		.start	= 0x10000000,
-		.end	= 0x1000000f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= 0x10800000,
-		.end	= 0x1080000f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= 0x11000000,
-		.end	= 0x1100000f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= 0x40100000,
-		.end	= 0x4010001f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= 0x40200000,
-		.end	= 0x4020001f,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= 0x40700000,
-		.end	= 0x4070001f,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	/* External UARTs */
-	/* FIXME: Shared IRQs on COM1-COM4 will not work properly on v1i1 hardware. */
-	{ /* COM1 */
-		.mapbase	= 0x10000000,
-		.irq		= PXA_GPIO_TO_IRQ(ZEUS_UARTA_GPIO),
-		.irqflags	= IRQF_TRIGGER_RISING,
-		.uartclk	= 14745600,
-		.regshift	= 1,
-		.flags		= UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	{ /* COM2 */
-		.mapbase	= 0x10800000,
-		.irq		= PXA_GPIO_TO_IRQ(ZEUS_UARTB_GPIO),
-		.irqflags	= IRQF_TRIGGER_RISING,
-		.uartclk	= 14745600,
-		.regshift	= 1,
-		.flags		= UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	{ /* COM3 */
-		.mapbase	= 0x11000000,
-		.irq		= PXA_GPIO_TO_IRQ(ZEUS_UARTC_GPIO),
-		.irqflags	= IRQF_TRIGGER_RISING,
-		.uartclk	= 14745600,
-		.regshift	= 1,
-		.flags		= UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	{ /* COM4 */
-		.mapbase	= 0x11800000,
-		.irq		= PXA_GPIO_TO_IRQ(ZEUS_UARTD_GPIO),
-		.irqflags	= IRQF_TRIGGER_RISING,
-		.uartclk	= 14745600,
-		.regshift	= 1,
-		.flags		= UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	/* Internal UARTs */
-	{ /* FFUART */
-		.membase	= (void *)&FFUART,
-		.mapbase	= __PREG(FFUART),
-		.irq		= IRQ_FFUART,
-		.uartclk	= 921600 * 16,
-		.regshift	= 2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	{ /* BTUART */
-		.membase	= (void *)&BTUART,
-		.mapbase	= __PREG(BTUART),
-		.irq		= IRQ_BTUART,
-		.uartclk	= 921600 * 16,
-		.regshift	= 2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	{ /* STUART */
-		.membase	= (void *)&STUART,
-		.mapbase	= __PREG(STUART),
-		.irq		= IRQ_STUART,
-		.uartclk	= 921600 * 16,
-		.regshift	= 2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-	},
-	{ },
-};
-
-static struct platform_device zeus_serial_device = {
-	.name = "serial8250",
-	.id   = PLAT8250_DEV_PLATFORM,
-	.dev  = {
-		.platform_data = serial_platform_data,
-	},
-	.num_resources	= ARRAY_SIZE(zeus_serial_resources),
-	.resource	= zeus_serial_resources,
-};
-
-/* Ethernet */
-static struct resource zeus_dm9k0_resource[] = {
-	[0] = {
-		.start = ZEUS_ETH0_PHYS,
-		.end   = ZEUS_ETH0_PHYS + 1,
-		.flags = IORESOURCE_MEM
-	},
-	[1] = {
-		.start = ZEUS_ETH0_PHYS + 2,
-		.end   = ZEUS_ETH0_PHYS + 3,
-		.flags = IORESOURCE_MEM
-	},
-	[2] = {
-		.start = PXA_GPIO_TO_IRQ(ZEUS_ETH0_GPIO),
-		.end   = PXA_GPIO_TO_IRQ(ZEUS_ETH0_GPIO),
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct resource zeus_dm9k1_resource[] = {
-	[0] = {
-		.start = ZEUS_ETH1_PHYS,
-		.end   = ZEUS_ETH1_PHYS + 1,
-		.flags = IORESOURCE_MEM
-	},
-	[1] = {
-		.start = ZEUS_ETH1_PHYS + 2,
-		.end   = ZEUS_ETH1_PHYS + 3,
-		.flags = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start = PXA_GPIO_TO_IRQ(ZEUS_ETH1_GPIO),
-		.end   = PXA_GPIO_TO_IRQ(ZEUS_ETH1_GPIO),
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct dm9000_plat_data zeus_dm9k_platdata = {
-	.flags		= DM9000_PLATF_16BITONLY,
-};
-
-static struct platform_device zeus_dm9k0_device = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(zeus_dm9k0_resource),
-	.resource	= zeus_dm9k0_resource,
-	.dev		= {
-		.platform_data = &zeus_dm9k_platdata,
-	}
-};
-
-static struct platform_device zeus_dm9k1_device = {
-	.name		= "dm9000",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(zeus_dm9k1_resource),
-	.resource	= zeus_dm9k1_resource,
-	.dev		= {
-		.platform_data = &zeus_dm9k_platdata,
-	}
-};
-
-/* External SRAM */
-static struct resource zeus_sram_resource = {
-	.start		= ZEUS_SRAM_PHYS,
-	.end		= ZEUS_SRAM_PHYS + ZEUS_SRAM_SIZE * 2 - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device zeus_sram_device = {
-	.name		= "pxa2xx-8bit-sram",
-	.id		= 0,
-	.num_resources	= 1,
-	.resource	= &zeus_sram_resource,
-};
-
-/* SPI interface on SSP3 */
-static struct pxa2xx_spi_controller pxa2xx_spi_ssp3_master_info = {
-	.num_chipselect = 1,
-	.enable_dma     = 1,
-};
-
-/* CAN bus on SPI */
-static struct regulator_consumer_supply can_regulator_consumer =
-	REGULATOR_SUPPLY("vdd", "spi3.0");
-
-static struct regulator_init_data can_regulator_init_data = {
-	.constraints	= {
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-	},
-	.consumer_supplies	= &can_regulator_consumer,
-	.num_consumer_supplies	= 1,
-};
-
-static struct fixed_voltage_config can_regulator_pdata = {
-	.supply_name	= "CAN_SHDN",
-	.microvolts	= 3300000,
-	.init_data	= &can_regulator_init_data,
-};
-
-static struct platform_device can_regulator_device = {
-	.name	= "reg-fixed-voltage",
-	.id	= 0,
-	.dev	= {
-		.platform_data	= &can_regulator_pdata,
-	},
-};
-
-static struct gpiod_lookup_table can_regulator_gpiod_table = {
-	.dev_id = "reg-fixed-voltage.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", ZEUS_CAN_SHDN_GPIO,
-			    NULL, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static const struct property_entry mcp251x_properties[] = {
-	PROPERTY_ENTRY_U32("clock-frequency", 16000000),
-	{}
-};
-
-static const struct software_node mcp251x_node = {
-	.properties = mcp251x_properties,
-};
-
-static struct spi_board_info zeus_spi_board_info[] = {
-	[0] = {
-		.modalias	= "mcp2515",
-		.swnode		= &mcp251x_node,
-		.irq		= PXA_GPIO_TO_IRQ(ZEUS_CAN_GPIO),
-		.max_speed_hz	= 1*1000*1000,
-		.bus_num	= 3,
-		.mode		= SPI_MODE_0,
-		.chip_select	= 0,
-	},
-};
-
-/* Leds */
-static struct gpio_led zeus_leds[] = {
-	[0] = {
-		.name		 = "zeus:yellow:1",
-		.default_trigger = "heartbeat",
-		.gpio		 = ZEUS_EXT0_GPIO(3),
-		.active_low	 = 1,
-	},
-	[1] = {
-		.name		 = "zeus:yellow:2",
-		.default_trigger = "default-on",
-		.gpio		 = ZEUS_EXT0_GPIO(4),
-		.active_low	 = 1,
-	},
-	[2] = {
-		.name		 = "zeus:yellow:3",
-		.default_trigger = "default-on",
-		.gpio		 = ZEUS_EXT0_GPIO(5),
-		.active_low	 = 1,
-	},
-};
-
-static struct gpio_led_platform_data zeus_leds_info = {
-	.leds		= zeus_leds,
-	.num_leds	= ARRAY_SIZE(zeus_leds),
-};
-
-static struct platform_device zeus_leds_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &zeus_leds_info,
-	},
-};
-
-static void zeus_cf_reset(int state)
-{
-	u16 cpld_state = __raw_readw(ZEUS_CPLD_CONTROL);
-
-	if (state)
-		cpld_state |= ZEUS_CPLD_CONTROL_CF_RST;
-	else
-		cpld_state &= ~ZEUS_CPLD_CONTROL_CF_RST;
-
-	__raw_writew(cpld_state, ZEUS_CPLD_CONTROL);
-}
-
-static struct arcom_pcmcia_pdata zeus_pcmcia_info = {
-	.cd_gpio	= ZEUS_CF_CD_GPIO,
-	.rdy_gpio	= ZEUS_CF_RDY_GPIO,
-	.pwr_gpio	= ZEUS_CF_PWEN_GPIO,
-	.reset		= zeus_cf_reset,
-};
-
-static struct platform_device zeus_pcmcia_device = {
-	.name		= "zeus-pcmcia",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &zeus_pcmcia_info,
-	},
-};
-
-static struct resource zeus_max6369_resource = {
-	.start		= ZEUS_CPLD_EXTWDOG_PHYS,
-	.end		= ZEUS_CPLD_EXTWDOG_PHYS,
-	.flags		= IORESOURCE_MEM,
-};
-
-struct platform_device zeus_max6369_device = {
-	.name		= "max6369_wdt",
-	.id		= -1,
-	.resource	= &zeus_max6369_resource,
-	.num_resources	= 1,
-};
-
-/* AC'97 */
-static pxa2xx_audio_ops_t zeus_ac97_info = {
-	.reset_gpio = 95,
-};
-
-
-/*
- * USB host
- */
-
-static struct regulator_consumer_supply zeus_ohci_regulator_supplies[] = {
-	REGULATOR_SUPPLY("vbus2", "pxa27x-ohci"),
-};
-
-static struct regulator_init_data zeus_ohci_regulator_data = {
-	.constraints = {
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(zeus_ohci_regulator_supplies),
-	.consumer_supplies	= zeus_ohci_regulator_supplies,
-};
-
-static struct fixed_voltage_config zeus_ohci_regulator_config = {
-	.supply_name		= "vbus2",
-	.microvolts		= 5000000, /* 5.0V */
-	.startup_delay		= 0,
-	.init_data		= &zeus_ohci_regulator_data,
-};
-
-static struct platform_device zeus_ohci_regulator_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 1,
-	.dev = {
-		.platform_data = &zeus_ohci_regulator_config,
-	},
-};
-
-static struct gpiod_lookup_table zeus_ohci_regulator_gpiod_table = {
-	.dev_id = "reg-fixed-voltage.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", ZEUS_USB2_PWREN_GPIO,
-			    NULL, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct pxaohci_platform_data zeus_ohci_platform_data = {
-	.port_mode	= PMM_NPS_MODE,
-	/* Clear Power Control Polarity Low and set Power Sense
-	 * Polarity Low. Supply power to USB ports. */
-	.flags		= ENABLE_PORT_ALL | POWER_SENSE_LOW,
-};
-
-static void __init zeus_register_ohci(void)
-{
-	/* Port 2 is shared between host and client interface. */
-	UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE;
-
-	pxa_set_ohci_info(&zeus_ohci_platform_data);
-}
-
-/*
- * Flat Panel
- */
-
-static void zeus_lcd_power(int on, struct fb_var_screeninfo *si)
-{
-	gpio_set_value(ZEUS_LCD_EN_GPIO, on);
-}
-
-static void zeus_backlight_power(int on)
-{
-	gpio_set_value(ZEUS_BKLEN_GPIO, on);
-}
-
-static int zeus_setup_fb_gpios(void)
-{
-	int err;
-
-	if ((err = gpio_request(ZEUS_LCD_EN_GPIO, "LCD_EN")))
-		goto out_err;
-
-	if ((err = gpio_direction_output(ZEUS_LCD_EN_GPIO, 0)))
-		goto out_err_lcd;
-
-	if ((err = gpio_request(ZEUS_BKLEN_GPIO, "BKLEN")))
-		goto out_err_lcd;
-
-	if ((err = gpio_direction_output(ZEUS_BKLEN_GPIO, 0)))
-		goto out_err_bkl;
-
-	return 0;
-
-out_err_bkl:
-	gpio_free(ZEUS_BKLEN_GPIO);
-out_err_lcd:
-	gpio_free(ZEUS_LCD_EN_GPIO);
-out_err:
-	return err;
-}
-
-static struct pxafb_mode_info zeus_fb_mode_info[] = {
-	{
-		.pixclock       = 39722,
-
-		.xres           = 640,
-		.yres           = 480,
-
-		.bpp            = 16,
-
-		.hsync_len      = 63,
-		.left_margin    = 16,
-		.right_margin   = 81,
-
-		.vsync_len      = 2,
-		.upper_margin   = 12,
-		.lower_margin   = 31,
-
-		.sync		= 0,
-	},
-};
-
-static struct pxafb_mach_info zeus_fb_info = {
-	.modes			= zeus_fb_mode_info,
-	.num_modes		= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_lcd_power	= zeus_lcd_power,
-	.pxafb_backlight_power	= zeus_backlight_power,
-};
-
-/*
- * MMC/SD Device
- *
- * The card detect interrupt isn't debounced so we delay it by 250ms
- * to give the card a chance to fully insert/eject.
- */
-
-static struct pxamci_platform_data zeus_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.detect_delay_ms	= 250,
-	.gpio_card_ro_invert	= 1,
-};
-
-static struct gpiod_lookup_table zeus_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", ZEUS_MMC_CD_GPIO,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio-pxa", ZEUS_MMC_WP_GPIO,
-			    "wp", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/*
- * USB Device Controller
- */
-static void zeus_udc_command(int cmd)
-{
-	switch (cmd) {
-	case PXA2XX_UDC_CMD_DISCONNECT:
-		pr_info("zeus: disconnecting USB client\n");
-		UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE;
-		break;
-
-	case PXA2XX_UDC_CMD_CONNECT:
-		pr_info("zeus: connecting USB client\n");
-		UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
-		break;
-	}
-}
-
-static struct pxa2xx_udc_mach_info zeus_udc_info = {
-	.udc_command = zeus_udc_command,
-};
-
-static struct platform_device *zeus_devices[] __initdata = {
-	&zeus_serial_device,
-	&zeus_mtd_devices[0],
-	&zeus_dm9k0_device,
-	&zeus_dm9k1_device,
-	&zeus_sram_device,
-	&zeus_leds_device,
-	&zeus_pcmcia_device,
-	&zeus_max6369_device,
-	&can_regulator_device,
-	&zeus_ohci_regulator_device,
-};
-
-#ifdef CONFIG_PM
-static void zeus_power_off(void)
-{
-	local_irq_disable();
-	cpu_suspend(PWRMODE_DEEPSLEEP, pxa27x_finish_suspend);
-}
-#else
-#define zeus_power_off   NULL
-#endif
-
-#ifdef CONFIG_APM_EMULATION
-static void zeus_get_power_status(struct apm_power_info *info)
-{
-	/* Power supply is always present */
-	info->ac_line_status	= APM_AC_ONLINE;
-	info->battery_status	= APM_BATTERY_STATUS_NOT_PRESENT;
-	info->battery_flag	= APM_BATTERY_FLAG_NOT_PRESENT;
-}
-
-static inline void zeus_setup_apm(void)
-{
-	apm_get_power_status = zeus_get_power_status;
-}
-#else
-static inline void zeus_setup_apm(void)
-{
-}
-#endif
-
-static int zeus_get_pcb_info(struct i2c_client *client, unsigned gpio,
-			     unsigned ngpio, void *context)
-{
-	int i;
-	u8 pcb_info = 0;
-
-	for (i = 0; i < 8; i++) {
-		int pcb_bit = gpio + i + 8;
-
-		if (gpio_request(pcb_bit, "pcb info")) {
-			dev_err(&client->dev, "Can't request pcb info %d\n", i);
-			continue;
-		}
-
-		if (gpio_direction_input(pcb_bit)) {
-			dev_err(&client->dev, "Can't read pcb info %d\n", i);
-			gpio_free(pcb_bit);
-			continue;
-		}
-
-		pcb_info |= !!gpio_get_value(pcb_bit) << i;
-
-		gpio_free(pcb_bit);
-	}
-
-	dev_info(&client->dev, "Zeus PCB version %d issue %d\n",
-		 pcb_info >> 4, pcb_info & 0xf);
-
-	return 0;
-}
-
-static struct pca953x_platform_data zeus_pca953x_pdata[] = {
-	[0] = { .gpio_base	= ZEUS_EXT0_GPIO_BASE, },
-	[1] = {
-		.gpio_base	= ZEUS_EXT1_GPIO_BASE,
-		.setup		= zeus_get_pcb_info,
-	},
-	[2] = { .gpio_base = ZEUS_USER_GPIO_BASE, },
-};
-
-static struct i2c_board_info __initdata zeus_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pca9535",	0x21),
-		.platform_data	= &zeus_pca953x_pdata[0],
-	},
-	{
-		I2C_BOARD_INFO("pca9535",	0x22),
-		.platform_data	= &zeus_pca953x_pdata[1],
-	},
-	{
-		I2C_BOARD_INFO("pca9535",	0x20),
-		.platform_data	= &zeus_pca953x_pdata[2],
-		.irq		= PXA_GPIO_TO_IRQ(ZEUS_EXTGPIO_GPIO),
-	},
-	{ I2C_BOARD_INFO("lm75a",	0x48) },
-	{ I2C_BOARD_INFO("24c01",	0x50) },
-	{ I2C_BOARD_INFO("isl1208",	0x6f) },
-};
-
-static mfp_cfg_t zeus_pin_config[] __initdata = {
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-
-	GPIO15_nCS_1,
-	GPIO78_nCS_2,
-	GPIO80_nCS_4,
-	GPIO33_nCS_5,
-
-	GPIO22_GPIO,
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-	GPIO119_USBH2_PWR,
-	GPIO120_USBH2_PEN,
-
-	GPIO86_LCD_LDD_16,
-	GPIO87_LCD_LDD_17,
-
-	GPIO102_GPIO,
-	GPIO104_CIF_DD_2,
-	GPIO105_CIF_DD_1,
-
-	GPIO81_SSP3_TXD,
-	GPIO82_SSP3_RXD,
-	GPIO83_SSP3_SFRM,
-	GPIO84_SSP3_SCLK,
-
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO79_PSKTSEL,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO36_GPIO,		/* CF CD */
-	GPIO97_GPIO,		/* CF PWREN */
-	GPIO99_GPIO,		/* CF RDY */
-};
-
-/*
- * DM9k MSCx settings:	SRAM, 16 bits
- *			17 cycles delay first access
- *			 5 cycles delay next access
- *			13 cycles recovery time
- *			faster device
- */
-#define DM9K_MSC_VALUE		0xe4c9
-
-static void __init zeus_init(void)
-{
-	u16 dm9000_msc = DM9K_MSC_VALUE;
-	u32 msc0, msc1;
-
-	system_rev = __raw_readw(ZEUS_CPLD_VERSION);
-	pr_info("Zeus CPLD V%dI%d\n", (system_rev & 0xf0) >> 4, (system_rev & 0x0f));
-
-	/* Fix timings for dm9000s (CS1/CS2)*/
-	msc0 = (__raw_readl(MSC0) & 0x0000ffff) | (dm9000_msc << 16);
-	msc1 = (__raw_readl(MSC1) & 0xffff0000) | dm9000_msc;
-	__raw_writel(msc0, MSC0);
-	__raw_writel(msc1, MSC1);
-
-	pm_power_off = zeus_power_off;
-	zeus_setup_apm();
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(zeus_pin_config));
-
-	gpiod_add_lookup_table(&can_regulator_gpiod_table);
-	gpiod_add_lookup_table(&zeus_ohci_regulator_gpiod_table);
-	platform_add_devices(zeus_devices, ARRAY_SIZE(zeus_devices));
-
-	zeus_register_ohci();
-
-	if (zeus_setup_fb_gpios())
-		pr_err("Failed to setup fb gpios\n");
-	else
-		pxa_set_fb_info(NULL, &zeus_fb_info);
-
-	gpiod_add_lookup_table(&zeus_mci_gpio_table);
-	pxa_set_mci_info(&zeus_mci_platform_data);
-	pxa_set_udc_info(&zeus_udc_info);
-	pxa_set_ac97_info(&zeus_ac97_info);
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(zeus_i2c_devices));
-	pxa2xx_set_spi_info(3, &pxa2xx_spi_ssp3_master_info);
-	spi_register_board_info(zeus_spi_board_info, ARRAY_SIZE(zeus_spi_board_info));
-
-	regulator_has_full_constraints();
-}
-
-static struct map_desc zeus_io_desc[] __initdata = {
-	{
-		.virtual = (unsigned long)ZEUS_CPLD_VERSION,
-		.pfn     = __phys_to_pfn(ZEUS_CPLD_VERSION_PHYS),
-		.length  = 0x1000,
-		.type    = MT_DEVICE,
-	},
-	{
-		.virtual = (unsigned long)ZEUS_CPLD_ISA_IRQ,
-		.pfn     = __phys_to_pfn(ZEUS_CPLD_ISA_IRQ_PHYS),
-		.length  = 0x1000,
-		.type    = MT_DEVICE,
-	},
-	{
-		.virtual = (unsigned long)ZEUS_CPLD_CONTROL,
-		.pfn     = __phys_to_pfn(ZEUS_CPLD_CONTROL_PHYS),
-		.length  = 0x1000,
-		.type    = MT_DEVICE,
-	},
-	{
-		.virtual = (unsigned long)ZEUS_PC104IO,
-		.pfn     = __phys_to_pfn(ZEUS_PC104IO_PHYS),
-		.length  = 0x00800000,
-		.type    = MT_DEVICE,
-	},
-	{
-		/*
-		 * ISA I/O space mapping:
-		 * -  ports 0x0000-0x0fff are PC/104
-		 * -  ports 0x10000-0x10fff are PCMCIA slot 1
-		 * -  ports 0x11000-0x11fff are PC/104
-		 */
-		.virtual = PCI_IO_VIRT_BASE,
-		.pfn     = __phys_to_pfn(ZEUS_PC104IO_PHYS),
-		.length  = 0x1000,
-		.type    = MT_DEVICE,
-	},
-};
-
-static void __init zeus_map_io(void)
-{
-	pxa27x_map_io();
-
-	iotable_init(zeus_io_desc, ARRAY_SIZE(zeus_io_desc));
-
-	/* Clear PSPR to ensure a full restart on wake-up. */
-	PMCR = PSPR = 0;
-
-	/* enable internal 32.768Khz oscillator (ignore OSCC_OOK) */
-	writel(readl(OSCC) | OSCC_OON, OSCC);
-
-	/* Some clock cycles later (from OSCC_ON), programme PCFR (OPDE...).
-	 * float chip selects and PCMCIA */
-	PCFR = PCFR_OPDE | PCFR_DC_EN | PCFR_FS | PCFR_FP;
-}
-
-MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS")
-	/* Maintainer: Marc Zyngier <maz@misterjones.org> */
-	.atag_offset	= 0x100,
-	.map_io		= zeus_map_io,
-	.nr_irqs	= ZEUS_NR_IRQS,
-	.init_irq	= zeus_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= zeus_init,
-	.restart	= pxa_restart,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/zeus.h b/arch/arm/mach-pxa/zeus.h
deleted file mode 100644
index 8fa6b2923f63..000000000000
--- a/arch/arm/mach-pxa/zeus.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  arch/arm/mach-pxa/include/mach/zeus.h
- *
- *  Author:	David Vrabel
- *  Created:	Sept 28, 2005
- *  Copyright:	Arcom Control Systems Ltd.
- *
- *  Maintained by: Marc Zyngier <maz@misterjones.org>
- */
-
-#ifndef _MACH_ZEUS_H
-#define _MACH_ZEUS_H
-
-#define ZEUS_NR_IRQS		(IRQ_BOARD_START + 48)
-
-/* Physical addresses */
-#define ZEUS_FLASH_PHYS		PXA_CS0_PHYS
-#define ZEUS_ETH0_PHYS		PXA_CS1_PHYS
-#define ZEUS_ETH1_PHYS		PXA_CS2_PHYS
-#define ZEUS_CPLD_PHYS		(PXA_CS4_PHYS+0x2000000)
-#define ZEUS_SRAM_PHYS		PXA_CS5_PHYS
-#define ZEUS_PC104IO_PHYS	(0x30000000)
-
-#define ZEUS_CPLD_VERSION_PHYS	(ZEUS_CPLD_PHYS + 0x00000000)
-#define ZEUS_CPLD_ISA_IRQ_PHYS	(ZEUS_CPLD_PHYS + 0x00800000)
-#define ZEUS_CPLD_CONTROL_PHYS	(ZEUS_CPLD_PHYS + 0x01000000)
-#define ZEUS_CPLD_EXTWDOG_PHYS	(ZEUS_CPLD_PHYS + 0x01800000)
-
-/* GPIOs */
-#define ZEUS_AC97_GPIO		0
-#define ZEUS_WAKEUP_GPIO	1
-#define ZEUS_UARTA_GPIO		9
-#define ZEUS_UARTB_GPIO		10
-#define ZEUS_UARTC_GPIO		12
-#define ZEUS_UARTD_GPIO		11
-#define ZEUS_ETH0_GPIO		14
-#define ZEUS_ISA_GPIO		17
-#define ZEUS_BKLEN_GPIO		19
-#define ZEUS_USB2_PWREN_GPIO	22
-#define ZEUS_PTT_GPIO		27
-#define ZEUS_CF_CD_GPIO         35
-#define ZEUS_MMC_WP_GPIO        52
-#define ZEUS_MMC_CD_GPIO        53
-#define ZEUS_EXTGPIO_GPIO	91
-#define ZEUS_CF_PWEN_GPIO       97
-#define ZEUS_CF_RDY_GPIO        99
-#define ZEUS_LCD_EN_GPIO	101
-#define ZEUS_ETH1_GPIO		113
-#define ZEUS_CAN_GPIO		116
-
-#define ZEUS_EXT0_GPIO_BASE	128
-#define ZEUS_EXT1_GPIO_BASE	160
-#define ZEUS_USER_GPIO_BASE	192
-
-#define ZEUS_EXT0_GPIO(x)	(ZEUS_EXT0_GPIO_BASE + (x))
-#define ZEUS_EXT1_GPIO(x)	(ZEUS_EXT1_GPIO_BASE + (x))
-#define ZEUS_USER_GPIO(x)	(ZEUS_USER_GPIO_BASE + (x))
-
-#define	ZEUS_CAN_SHDN_GPIO	ZEUS_EXT1_GPIO(2)
-
-/*
- * CPLD registers:
- * Only 4 registers, but spread over a 32MB address space.
- * Be gentle, and remap that over 32kB...
- */
-
-#define ZEUS_CPLD		IOMEM(0xf0000000)
-#define ZEUS_CPLD_VERSION	(ZEUS_CPLD + 0x0000)
-#define ZEUS_CPLD_ISA_IRQ	(ZEUS_CPLD + 0x1000)
-#define ZEUS_CPLD_CONTROL	(ZEUS_CPLD + 0x2000)
-
-/* CPLD register bits */
-#define ZEUS_CPLD_CONTROL_CF_RST        0x01
-
-#define ZEUS_PC104IO		IOMEM(0xf1000000)
-
-#define ZEUS_SRAM_SIZE		(256 * 1024)
-
-#endif
-
-
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
deleted file mode 100644
index 8ed75ac29b1a..000000000000
--- a/arch/arm/mach-pxa/zylonite.c
+++ /dev/null
@@ -1,495 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/zylonite.c
- *
- * Support for the PXA3xx Development Platform (aka Zylonite)
- *
- * Copyright (C) 2006 Marvell International Ltd.
- *
- * 2007-09-04: eric miao <eric.miao@marvell.com>
- *             rewrite to align with latest kernel
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/leds.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio/machine.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/smc91x.h>
-#include <linux/soc/pxa/cpu.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include "pxa3xx.h"
-#include <linux/platform_data/asoc-pxa.h>
-#include <linux/platform_data/video-pxafb.h>
-#include "zylonite.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <linux/platform_data/keypad-pxa27x.h>
-#include <linux/platform_data/mtd-nand-pxa3xx.h>
-#include "mfp.h"
-
-#include "devices.h"
-#include "generic.h"
-
-int gpio_eth_irq;
-int gpio_debug_led1;
-int gpio_debug_led2;
-
-int wm9713_irq;
-
-int lcd_id;
-int lcd_orientation;
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= ZYLONITE_ETH_PHYS + 0x300,
-		.end	= ZYLONITE_ETH_PHYS + 0xfffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= -1,	/* for run-time assignment */
-		.end	= -1,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct smc91x_platdata zylonite_smc91x_info = {
-	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT |
-		  SMC91X_NOWAIT | SMC91X_USE_DMA,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &zylonite_smc91x_info,
-	},
-};
-
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static struct gpio_led zylonite_debug_leds[] = {
-	[0] = {
-		.name			= "zylonite:yellow:1",
-		.default_trigger	= "heartbeat",
-	},
-	[1] = {
-		.name			= "zylonite:yellow:2",
-		.default_trigger	= "default-on",
-	},
-};
-
-static struct gpio_led_platform_data zylonite_debug_leds_info = {
-	.leds		= zylonite_debug_leds,
-	.num_leds	= ARRAY_SIZE(zylonite_debug_leds),
-};
-
-static struct platform_device zylonite_device_leds = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &zylonite_debug_leds_info,
-	}
-};
-
-static void __init zylonite_init_leds(void)
-{
-	zylonite_debug_leds[0].gpio = gpio_debug_led1;
-	zylonite_debug_leds[1].gpio = gpio_debug_led2;
-
-	platform_device_register(&zylonite_device_leds);
-}
-#else
-static inline void zylonite_init_leds(void) {}
-#endif
-
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static struct pwm_lookup zylonite_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.1", 1, "pwm-backlight.0", NULL, 10000,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data zylonite_backlight_data = {
-	.max_brightness	= 100,
-	.dft_brightness	= 100,
-};
-
-static struct platform_device zylonite_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent = &pxa27x_device_pwm1.dev,
-		.platform_data	= &zylonite_backlight_data,
-	},
-};
-
-static struct pxafb_mode_info toshiba_ltm035a776c_mode = {
-	.pixclock		= 110000,
-	.xres			= 240,
-	.yres			= 320,
-	.bpp			= 16,
-	.hsync_len		= 4,
-	.left_margin		= 6,
-	.right_margin		= 4,
-	.vsync_len		= 2,
-	.upper_margin		= 2,
-	.lower_margin		= 3,
-	.sync			= FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mode_info toshiba_ltm04c380k_mode = {
-	.pixclock		= 50000,
-	.xres			= 640,
-	.yres			= 480,
-	.bpp			= 16,
-	.hsync_len		= 1,
-	.left_margin		= 0x9f,
-	.right_margin		= 1,
-	.vsync_len		= 44,
-	.upper_margin		= 0,
-	.lower_margin		= 0,
-	.sync			= FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct pxafb_mach_info zylonite_toshiba_lcd_info = {
-	.num_modes      	= 1,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static struct pxafb_mode_info sharp_ls037_modes[] = {
-	[0] = {
-		.pixclock	= 158000,
-		.xres		= 240,
-		.yres		= 320,
-		.bpp		= 16,
-		.hsync_len	= 4,
-		.left_margin	= 39,
-		.right_margin	= 39,
-		.vsync_len	= 1,
-		.upper_margin	= 2,
-		.lower_margin	= 3,
-		.sync		= 0,
-	},
-	[1] = {
-		.pixclock	= 39700,
-		.xres		= 480,
-		.yres		= 640,
-		.bpp		= 16,
-		.hsync_len	= 8,
-		.left_margin	= 81,
-		.right_margin	= 81,
-		.vsync_len	= 1,
-		.upper_margin	= 2,
-		.lower_margin	= 7,
-		.sync		= 0,
-	},
-};
-
-static struct pxafb_mach_info zylonite_sharp_lcd_info = {
-	.modes			= sharp_ls037_modes,
-	.num_modes		= 2,
-	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-static void __init zylonite_init_lcd(void)
-{
-	pwm_add_table(zylonite_pwm_lookup, ARRAY_SIZE(zylonite_pwm_lookup));
-	platform_device_register(&zylonite_backlight_device);
-
-	if (lcd_id & 0x20) {
-		pxa_set_fb_info(NULL, &zylonite_sharp_lcd_info);
-		return;
-	}
-
-	/* legacy LCD panels, it would be handy here if LCD panel type can
-	 * be decided at run-time
-	 */
-	if (1)
-		zylonite_toshiba_lcd_info.modes = &toshiba_ltm035a776c_mode;
-	else
-		zylonite_toshiba_lcd_info.modes = &toshiba_ltm04c380k_mode;
-
-	pxa_set_fb_info(NULL, &zylonite_toshiba_lcd_info);
-}
-#else
-static inline void zylonite_init_lcd(void) {}
-#endif
-
-#if defined(CONFIG_MMC)
-static struct pxamci_platform_data zylonite_mci_platform_data = {
-	.detect_delay_ms= 200,
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-};
-
-#define PCA9539A_MCI_CD 0
-#define PCA9539A_MCI1_CD 1
-#define PCA9539A_MCI_WP 2
-#define PCA9539A_MCI1_WP 3
-#define PCA9539A_MCI3_CD 30
-#define PCA9539A_MCI3_WP 31
-
-static struct gpiod_lookup_table zylonite_mci_gpio_table = {
-	.dev_id = "pxa2xx-mci.0",
-	.table = {
-		GPIO_LOOKUP("i2c-pca9539-a", PCA9539A_MCI_CD,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("i2c-pca9539-a", PCA9539A_MCI_WP,
-			    "wp", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct pxamci_platform_data zylonite_mci2_platform_data = {
-	.detect_delay_ms= 200,
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-};
-
-static struct gpiod_lookup_table zylonite_mci2_gpio_table = {
-	.dev_id = "pxa2xx-mci.1",
-	.table = {
-		GPIO_LOOKUP("i2c-pca9539-a", PCA9539A_MCI1_CD,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("i2c-pca9539-a", PCA9539A_MCI1_WP,
-			    "wp", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct pxamci_platform_data zylonite_mci3_platform_data = {
-	.detect_delay_ms= 200,
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-};
-
-static struct gpiod_lookup_table zylonite_mci3_gpio_table = {
-	.dev_id = "pxa2xx-mci.2",
-	.table = {
-		GPIO_LOOKUP("i2c-pca9539-a", PCA9539A_MCI3_CD,
-			    "cd", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("i2c-pca9539-a", PCA9539A_MCI3_WP,
-			    "wp", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static void __init zylonite_init_mmc(void)
-{
-	gpiod_add_lookup_table(&zylonite_mci_gpio_table);
-	pxa_set_mci_info(&zylonite_mci_platform_data);
-	gpiod_add_lookup_table(&zylonite_mci2_gpio_table);
-	pxa3xx_set_mci2_info(&zylonite_mci2_platform_data);
-	if (cpu_is_pxa310()) {
-		gpiod_add_lookup_table(&zylonite_mci3_gpio_table);
-		pxa3xx_set_mci3_info(&zylonite_mci3_platform_data);
-	}
-}
-#else
-static inline void zylonite_init_mmc(void) {}
-#endif
-
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static const unsigned int zylonite_matrix_key_map[] = {
-	/* KEY(row, col, key_code) */
-	KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_C), KEY(0, 5, KEY_D),
-	KEY(1, 0, KEY_E), KEY(1, 1, KEY_F), KEY(1, 2, KEY_G), KEY(1, 5, KEY_H),
-	KEY(2, 0, KEY_I), KEY(2, 1, KEY_J), KEY(2, 2, KEY_K), KEY(2, 5, KEY_L),
-	KEY(3, 0, KEY_M), KEY(3, 1, KEY_N), KEY(3, 2, KEY_O), KEY(3, 5, KEY_P),
-	KEY(5, 0, KEY_Q), KEY(5, 1, KEY_R), KEY(5, 2, KEY_S), KEY(5, 5, KEY_T),
-	KEY(6, 0, KEY_U), KEY(6, 1, KEY_V), KEY(6, 2, KEY_W), KEY(6, 5, KEY_X),
-	KEY(7, 1, KEY_Y), KEY(7, 2, KEY_Z),
-
-	KEY(4, 4, KEY_0), KEY(1, 3, KEY_1), KEY(4, 1, KEY_2), KEY(1, 4, KEY_3),
-	KEY(2, 3, KEY_4), KEY(4, 2, KEY_5), KEY(2, 4, KEY_6), KEY(3, 3, KEY_7),
-	KEY(4, 3, KEY_8), KEY(3, 4, KEY_9),
-
-	KEY(4, 5, KEY_SPACE),
-	KEY(5, 3, KEY_KPASTERISK), 	/* * */
-	KEY(5, 4, KEY_KPDOT), 		/* #" */
-
-	KEY(0, 7, KEY_UP),
-	KEY(1, 7, KEY_DOWN),
-	KEY(2, 7, KEY_LEFT),
-	KEY(3, 7, KEY_RIGHT),
-	KEY(2, 6, KEY_HOME),
-	KEY(3, 6, KEY_END),
-	KEY(6, 4, KEY_DELETE),
-	KEY(6, 6, KEY_BACK),
-	KEY(6, 3, KEY_CAPSLOCK),	/* KEY_LEFTSHIFT), */
-
-	KEY(4, 6, KEY_ENTER),		/* scroll push */
-	KEY(5, 7, KEY_ENTER),		/* keypad action */
-
-	KEY(0, 4, KEY_EMAIL),
-	KEY(5, 6, KEY_SEND),
-	KEY(4, 0, KEY_CALENDAR),
-	KEY(7, 6, KEY_RECORD),
-	KEY(6, 7, KEY_VOLUMEUP),
-	KEY(7, 7, KEY_VOLUMEDOWN),
-
-	KEY(0, 6, KEY_F22),	/* soft1 */
-	KEY(1, 6, KEY_F23),	/* soft2 */
-	KEY(0, 3, KEY_AUX),	/* contact */
-};
-
-static struct matrix_keymap_data zylonite_matrix_keymap_data = {
-	.keymap			= zylonite_matrix_key_map,
-	.keymap_size		= ARRAY_SIZE(zylonite_matrix_key_map),
-};
-
-static struct pxa27x_keypad_platform_data zylonite_keypad_info = {
-	.matrix_key_rows	= 8,
-	.matrix_key_cols	= 8,
-	.matrix_keymap_data	= &zylonite_matrix_keymap_data,
-
-	.enable_rotary0		= 1,
-	.rotary0_up_key		= KEY_UP,
-	.rotary0_down_key	= KEY_DOWN,
-
-	.debounce_interval	= 30,
-};
-
-static void __init zylonite_init_keypad(void)
-{
-	pxa_set_keypad_info(&zylonite_keypad_info);
-}
-#else
-static inline void zylonite_init_keypad(void) {}
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_NAND_MARVELL)
-static struct mtd_partition zylonite_nand_partitions[] = {
-	[0] = {
-		.name        = "Bootloader",
-		.offset      = 0,
-		.size        = 0x060000,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	[1] = {
-		.name        = "Kernel",
-		.offset      = 0x060000,
-		.size        = 0x200000,
-		.mask_flags  = MTD_WRITEABLE, /* force read-only */
-	},
-	[2] = {
-		.name        = "Filesystem",
-		.offset      = 0x0260000,
-		.size        = 0x3000000,     /* 48M - rootfs */
-	},
-	[3] = {
-		.name        = "MassStorage",
-		.offset      = 0x3260000,
-		.size        = 0x3d40000,
-	},
-	[4] = {
-		.name        = "BBT",
-		.offset      = 0x6FA0000,
-		.size        = 0x80000,
-		.mask_flags  = MTD_WRITEABLE,  /* force read-only */
-	},
-	/* NOTE: we reserve some blocks at the end of the NAND flash for
-	 * bad block management, and the max number of relocation blocks
-	 * differs on different platforms. Please take care with it when
-	 * defining the partition table.
-	 */
-};
-
-static struct pxa3xx_nand_platform_data zylonite_nand_info = {
-	.parts		= zylonite_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(zylonite_nand_partitions),
-};
-
-static void __init zylonite_init_nand(void)
-{
-	pxa3xx_set_nand_info(&zylonite_nand_info);
-}
-#else
-static inline void zylonite_init_nand(void) {}
-#endif /* IS_ENABLED(CONFIG_MTD_NAND_MARVELL) */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static struct pxaohci_platform_data zylonite_ohci_info = {
-	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | ENABLE_PORT2 |
-			  POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-static void __init zylonite_init_ohci(void)
-{
-	pxa_set_ohci_info(&zylonite_ohci_info);
-}
-#else
-static inline void zylonite_init_ohci(void) {}
-#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
-
-static struct gpiod_lookup_table zylonite_wm97xx_touch_gpio15_table = {
-	.dev_id = "wm97xx-touch.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", mfp_to_gpio(MFP_PIN_GPIO15),
-			    "touch", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table zylonite_wm97xx_touch_gpio26_table = {
-	.dev_id = "wm97xx-touch.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", mfp_to_gpio(MFP_PIN_GPIO26),
-			    "touch", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static void __init zylonite_init_wm97xx_touch(void)
-{
-	if (!IS_ENABLED(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE))
-		return;
-
-	if (cpu_is_pxa320())
-		gpiod_add_lookup_table(&zylonite_wm97xx_touch_gpio15_table);
-	else
-		gpiod_add_lookup_table(&zylonite_wm97xx_touch_gpio26_table);
-}
-
-static void __init zylonite_init(void)
-{
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	/* board-processor specific initialization */
-	zylonite_pxa300_init();
-	zylonite_pxa320_init();
-
-	/*
-	 * Note: We depend that the bootloader set
-	 * the correct value to MSC register for SMC91x.
-	 */
-	smc91x_resources[1].start = PXA_GPIO_TO_IRQ(gpio_eth_irq);
-	smc91x_resources[1].end   = PXA_GPIO_TO_IRQ(gpio_eth_irq);
-	platform_device_register(&smc91x_device);
-
-	pxa_set_ac97_info(NULL);
-	zylonite_init_lcd();
-	zylonite_init_mmc();
-	zylonite_init_keypad();
-	zylonite_init_nand();
-	zylonite_init_leds();
-	zylonite_init_ohci();
-	zylonite_init_wm97xx_touch();
-}
-
-MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
-	.atag_offset	= 0x100,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= ZYLONITE_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= zylonite_init,
-	.restart	= pxa_restart,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/zylonite.h b/arch/arm/mach-pxa/zylonite.h
deleted file mode 100644
index afe3efcb8e04..000000000000
--- a/arch/arm/mach-pxa/zylonite.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_ARCH_ZYLONITE_H
-#define __ASM_ARCH_ZYLONITE_H
-
-#include <linux/soc/pxa/cpu.h>
-
-#define ZYLONITE_ETH_PHYS	0x14000000
-
-#define EXT_GPIO(x)		(128 + (x))
-
-#define ZYLONITE_NR_IRQS	(IRQ_BOARD_START + 32)
-
-/* the following variables are processor specific and initialized
- * by the corresponding zylonite_pxa3xx_init()
- */
-extern int gpio_eth_irq;
-extern int gpio_debug_led1;
-extern int gpio_debug_led2;
-
-extern int wm9713_irq;
-
-extern int lcd_id;
-extern int lcd_orientation;
-
-#ifdef CONFIG_MACH_ZYLONITE300
-extern void zylonite_pxa300_init(void);
-#else
-static inline void zylonite_pxa300_init(void)
-{
-	if (cpu_is_pxa300() || cpu_is_pxa310())
-		panic("%s: PXA300/PXA310 not supported\n", __func__);
-}
-#endif
-
-#ifdef CONFIG_MACH_ZYLONITE320
-extern void zylonite_pxa320_init(void);
-#else
-static inline void zylonite_pxa320_init(void)
-{
-	if (cpu_is_pxa320())
-		panic("%s: PXA320 not supported\n", __func__);
-}
-#endif
-
-#endif /* __ASM_ARCH_ZYLONITE_H */
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
deleted file mode 100644
index 50a8a3547dbc..000000000000
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ /dev/null
@@ -1,281 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/zylonite_pxa300.c
- *
- * PXA300/PXA310 specific support code for the
- * PXA3xx Development Platform (aka Zylonite)
- *
- * Copyright (C) 2007 Marvell Internation Ltd.
- * 2007-08-21: eric miao <eric.miao@marvell.com>
- *             initial version
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/gpio.h>
-#include <linux/soc/pxa/cpu.h>
-
-#include "pxa300.h"
-#include "devices.h"
-#include "zylonite.h"
-
-#include "generic.h"
-
-/* PXA300/PXA310 common configurations */
-static mfp_cfg_t common_mfp_cfg[] __initdata = {
-	/* LCD */
-	GPIO54_LCD_LDD_0,
-	GPIO55_LCD_LDD_1,
-	GPIO56_LCD_LDD_2,
-	GPIO57_LCD_LDD_3,
-	GPIO58_LCD_LDD_4,
-	GPIO59_LCD_LDD_5,
-	GPIO60_LCD_LDD_6,
-	GPIO61_LCD_LDD_7,
-	GPIO62_LCD_LDD_8,
-	GPIO63_LCD_LDD_9,
-	GPIO64_LCD_LDD_10,
-	GPIO65_LCD_LDD_11,
-	GPIO66_LCD_LDD_12,
-	GPIO67_LCD_LDD_13,
-	GPIO68_LCD_LDD_14,
-	GPIO69_LCD_LDD_15,
-	GPIO70_LCD_LDD_16,
-	GPIO71_LCD_LDD_17,
-	GPIO72_LCD_FCLK,
-	GPIO73_LCD_LCLK,
-	GPIO74_LCD_PCLK,
-	GPIO75_LCD_BIAS,
-	GPIO76_LCD_VSYNC,
-	GPIO127_LCD_CS_N,
-	GPIO20_PWM3_OUT,	/* backlight */
-
-	/* BTUART */
-	GPIO111_UART2_RTS,
-	GPIO112_UART2_RXD | MFP_LPM_EDGE_FALL,
-	GPIO113_UART2_TXD,
-	GPIO114_UART2_CTS | MFP_LPM_EDGE_BOTH,
-
-	/* STUART */
-	GPIO109_UART3_TXD,
-	GPIO110_UART3_RXD | MFP_LPM_EDGE_FALL,
-
-	/* AC97 */
-	GPIO23_AC97_nACRESET,
-	GPIO24_AC97_SYSCLK,
-	GPIO29_AC97_BITCLK,
-	GPIO25_AC97_SDATA_IN_0,
-	GPIO27_AC97_SDATA_OUT,
-	GPIO28_AC97_SYNC,
-	GPIO17_GPIO,	/* SDATA_IN_1 but unused - configure to GPIO */
-
-	/* SSP3 */
-	GPIO91_SSP3_SCLK,
-	GPIO92_SSP3_FRM,
-	GPIO93_SSP3_TXD,
-	GPIO94_SSP3_RXD,
-
-	/* WM9713 IRQ */
-	GPIO26_GPIO,
-
-	/* Keypad */
-	GPIO107_KP_DKIN_0 | MFP_LPM_EDGE_BOTH,
-	GPIO108_KP_DKIN_1 | MFP_LPM_EDGE_BOTH,
-	GPIO115_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
-	GPIO116_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
-	GPIO117_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
-	GPIO118_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
-	GPIO119_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
-	GPIO120_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
-	GPIO2_2_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
-	GPIO3_2_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
-	GPIO121_KP_MKOUT_0,
-	GPIO122_KP_MKOUT_1,
-	GPIO123_KP_MKOUT_2,
-	GPIO124_KP_MKOUT_3,
-	GPIO125_KP_MKOUT_4,
-	GPIO4_2_KP_MKOUT_5,
-	GPIO5_2_KP_MKOUT_6,
-	GPIO6_2_KP_MKOUT_7,
-
-	/* MMC1 */
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-	GPIO7_MMC1_CLK,
-	GPIO8_MMC1_CMD,	/* CMD0 for slot 0 */
-	GPIO15_GPIO,	/* CMD1 default as GPIO for slot 0 */
-
-	/* MMC2 */
-	GPIO9_MMC2_DAT0,
-	GPIO10_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
-	GPIO11_MMC2_DAT2,
-	GPIO12_MMC2_DAT3,
-	GPIO13_MMC2_CLK,
-	GPIO14_MMC2_CMD,
-
-	/* USB Host */
-	GPIO0_2_USBH_PEN,
-	GPIO1_2_USBH_PWR,
-
-	/* Standard I2C */
-	GPIO21_I2C_SCL,
-	GPIO22_I2C_SDA,
-
-	/* GPIO */
-	GPIO18_GPIO | MFP_PULL_HIGH,	/* GPIO Expander #0 INT_N */
-	GPIO19_GPIO | MFP_PULL_HIGH,	/* GPIO Expander #1 INT_N */
-};
-
-static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
-	/* FFUART */
-	GPIO30_UART1_RXD | MFP_LPM_EDGE_FALL,
-	GPIO31_UART1_TXD,
-	GPIO32_UART1_CTS,
-	GPIO37_UART1_RTS,
-	GPIO33_UART1_DCD,
-	GPIO34_UART1_DSR | MFP_LPM_EDGE_FALL,
-	GPIO35_UART1_RI,
-	GPIO36_UART1_DTR,
-
-	/* Ethernet */
-	GPIO2_nCS3,
-	GPIO99_GPIO,
-};
-
-static mfp_cfg_t pxa310_mfp_cfg[] __initdata = {
-	/* FFUART */
-	GPIO99_UART1_RXD | MFP_LPM_EDGE_FALL,
-	GPIO100_UART1_TXD,
-	GPIO101_UART1_CTS,
-	GPIO106_UART1_RTS,
-
-	/* Ethernet */
-	GPIO2_nCS3,
-	GPIO102_GPIO,
-
-	/* MMC3 */
-	GPIO7_2_MMC3_DAT0,
-	GPIO8_2_MMC3_DAT1 | MFP_LPM_EDGE_BOTH,
-	GPIO9_2_MMC3_DAT2,
-	GPIO10_2_MMC3_DAT3,
-	GPIO103_MMC3_CLK,
-	GPIO105_MMC3_CMD,
-};
-
-#define NUM_LCD_DETECT_PINS	7
-
-static int lcd_detect_pins[] __initdata = {
-	MFP_PIN_GPIO71,	/* LCD_LDD_17 - ORIENT */
-	MFP_PIN_GPIO70, /* LCD_LDD_16 - LCDID[5] */
-	MFP_PIN_GPIO75, /* LCD_BIAS   - LCDID[4] */
-	MFP_PIN_GPIO73, /* LCD_LCLK   - LCDID[3] */
-	MFP_PIN_GPIO72, /* LCD_FCLK   - LCDID[2] */
-	MFP_PIN_GPIO127,/* LCD_CS_N   - LCDID[1] */
-	MFP_PIN_GPIO76, /* LCD_VSYNC  - LCDID[0] */
-};
-
-static void __init zylonite_detect_lcd_panel(void)
-{
-	unsigned long mfpr_save[NUM_LCD_DETECT_PINS];
-	int i, gpio, id = 0;
-
-	/* save the original MFP settings of these pins and configure
-	 * them as GPIO Input, DS01X, Pull Neither, Edge Clear
-	 */
-	for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
-		mfpr_save[i] = pxa3xx_mfp_read(lcd_detect_pins[i]);
-		pxa3xx_mfp_write(lcd_detect_pins[i], 0x8440);
-	}
-
-	for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
-		id = id << 1;
-		gpio = mfp_to_gpio(lcd_detect_pins[i]);
-		gpio_request(gpio, "LCD_ID_PINS");
-		gpio_direction_input(gpio);
-
-		if (gpio_get_value(gpio))
-			id = id | 0x1;
-		gpio_free(gpio);
-	}
-
-	/* lcd id, flush out bit 1 */
-	lcd_id = id & 0x3d;
-
-	/* lcd orientation, portrait or landscape */
-	lcd_orientation = (id >> 6) & 0x1;
-
-	/* restore the original MFP settings */
-	for (i = 0; i < NUM_LCD_DETECT_PINS; i++)
-		pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]);
-}
-
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-static struct pca953x_platform_data gpio_exp[] = {
-	[0] = {
-		.gpio_base	= 128,
-	},
-	[1] = {
-		.gpio_base	= 144,
-	},
-};
-
-static struct i2c_board_info zylonite_i2c_board_info[] = {
-	{
-		.type		= "pca9539",
-		.dev_name	= "pca9539-a",
-		.addr		= 0x74,
-		.platform_data	= &gpio_exp[0],
-		.irq		= PXA_GPIO_TO_IRQ(18),
-	}, {
-		.type		= "pca9539",
-		.dev_name	= "pca9539-b",
-		.addr		= 0x75,
-		.platform_data	= &gpio_exp[1],
-		.irq		= PXA_GPIO_TO_IRQ(19),
-	},
-};
-
-static void __init zylonite_init_i2c(void)
-{
-	pxa_set_i2c_info(NULL);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(zylonite_i2c_board_info));
-}
-#else
-static inline void zylonite_init_i2c(void) {}
-#endif
-
-void __init zylonite_pxa300_init(void)
-{
-	if (cpu_is_pxa300() || cpu_is_pxa310()) {
-		/* initialize MFP */
-		pxa3xx_mfp_config(ARRAY_AND_SIZE(common_mfp_cfg));
-
-		/* detect LCD panel */
-		zylonite_detect_lcd_panel();
-
-		/* WM9713 IRQ */
-		wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO26);
-
-		zylonite_init_i2c();
-	}
-
-	if (cpu_is_pxa300()) {
-		pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa300_mfp_cfg));
-		gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO99);
-	}
-
-	if (cpu_is_pxa310()) {
-		pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa310_mfp_cfg));
-		gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO102);
-	}
-
-	/* GPIOs for Debug LEDs */
-	gpio_debug_led1 = EXT_GPIO(25);
-	gpio_debug_led2 = EXT_GPIO(26);
-}
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
deleted file mode 100644
index 67cab4f1194b..000000000000
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ /dev/null
@@ -1,213 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-pxa/zylonite_pxa320.c
- *
- * PXA320 specific support code for the
- * PXA3xx Development Platform (aka Zylonite)
- *
- * Copyright (C) 2007 Marvell Internation Ltd.
- * 2007-08-21: eric miao <eric.miao@marvell.com>
- *             initial version
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/soc/pxa/cpu.h>
-
-#include "pxa320.h"
-#include "zylonite.h"
-
-#include "generic.h"
-
-static mfp_cfg_t mfp_cfg[] __initdata = {
-	/* LCD */
-	GPIO6_2_LCD_LDD_0,
-	GPIO7_2_LCD_LDD_1,
-	GPIO8_2_LCD_LDD_2,
-	GPIO9_2_LCD_LDD_3,
-	GPIO10_2_LCD_LDD_4,
-	GPIO11_2_LCD_LDD_5,
-	GPIO12_2_LCD_LDD_6,
-	GPIO13_2_LCD_LDD_7,
-	GPIO63_LCD_LDD_8,
-	GPIO64_LCD_LDD_9,
-	GPIO65_LCD_LDD_10,
-	GPIO66_LCD_LDD_11,
-	GPIO67_LCD_LDD_12,
-	GPIO68_LCD_LDD_13,
-	GPIO69_LCD_LDD_14,
-	GPIO70_LCD_LDD_15,
-	GPIO71_LCD_LDD_16,
-	GPIO72_LCD_LDD_17,
-	GPIO73_LCD_CS_N,
-	GPIO74_LCD_VSYNC,
-	GPIO14_2_LCD_FCLK,
-	GPIO15_2_LCD_LCLK,
-	GPIO16_2_LCD_PCLK,
-	GPIO17_2_LCD_BIAS,
-	GPIO14_PWM3_OUT,	/* backlight */
-
-	/* FFUART */
-	GPIO41_UART1_RXD | MFP_LPM_EDGE_FALL,
-	GPIO42_UART1_TXD,
-	GPIO43_UART1_CTS,
-	GPIO44_UART1_DCD,
-	GPIO45_UART1_DSR | MFP_LPM_EDGE_FALL,
-	GPIO46_UART1_RI,
-	GPIO47_UART1_DTR,
-	GPIO48_UART1_RTS,
-
-	/* AC97 */
-	GPIO34_AC97_SYSCLK,
-	GPIO35_AC97_SDATA_IN_0,
-	GPIO37_AC97_SDATA_OUT,
-	GPIO38_AC97_SYNC,
-	GPIO39_AC97_BITCLK,
-	GPIO40_AC97_nACRESET,
-	GPIO36_GPIO,	/* SDATA_IN_1 but unused - configure to GPIO */
-
-	/* SSP3 */
-	GPIO89_SSP3_SCLK,
-	GPIO90_SSP3_FRM,
-	GPIO91_SSP3_TXD,
-	GPIO92_SSP3_RXD,
-
-	/* WM9713 IRQ */
-	GPIO15_GPIO,
-
-	/* I2C */
-	GPIO32_I2C_SCL,
-	GPIO33_I2C_SDA,
-
-	/* Keypad */
-	GPIO105_KP_DKIN_0 | MFP_LPM_EDGE_BOTH,
-	GPIO106_KP_DKIN_1 | MFP_LPM_EDGE_BOTH,
-	GPIO113_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
-	GPIO114_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
-	GPIO115_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
-	GPIO116_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
-	GPIO117_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
-	GPIO118_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
-	GPIO119_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
-	GPIO120_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
-	GPIO121_KP_MKOUT_0,
-	GPIO122_KP_MKOUT_1,
-	GPIO123_KP_MKOUT_2,
-	GPIO124_KP_MKOUT_3,
-	GPIO125_KP_MKOUT_4,
-	GPIO126_KP_MKOUT_5,
-	GPIO127_KP_MKOUT_6,
-	GPIO5_2_KP_MKOUT_7,
-
-	/* Ethernet */
-	GPIO4_nCS3,
-	GPIO90_GPIO,
-
-	/* MMC1 */
-	GPIO18_MMC1_DAT0,
-	GPIO19_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
-	GPIO20_MMC1_DAT2,
-	GPIO21_MMC1_DAT3,
-	GPIO22_MMC1_CLK,
-	GPIO23_MMC1_CMD,/* CMD0 for slot 0 */
-	GPIO31_GPIO,	/* CMD1 default as GPIO for slot 0 */
-
-	/* MMC2 */
-	GPIO24_MMC2_DAT0,
-	GPIO25_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
-	GPIO26_MMC2_DAT2,
-	GPIO27_MMC2_DAT3,
-	GPIO28_MMC2_CLK,
-	GPIO29_MMC2_CMD,
-
-	/* USB Host */
-	GPIO2_2_USBH_PEN,
-	GPIO3_2_USBH_PWR,
-
-	/* Debug LEDs */
-	GPIO1_2_GPIO | MFP_LPM_DRIVE_HIGH,
-	GPIO4_2_GPIO | MFP_LPM_DRIVE_HIGH,
-};
-
-#define NUM_LCD_DETECT_PINS	7
-
-static int lcd_detect_pins[] __initdata = {
-	MFP_PIN_GPIO72,   /* LCD_LDD_17 - ORIENT */
-	MFP_PIN_GPIO71,   /* LCD_LDD_16 - LCDID[5] */
-	MFP_PIN_GPIO17_2, /* LCD_BIAS   - LCDID[4] */
-	MFP_PIN_GPIO15_2, /* LCD_LCLK   - LCDID[3] */
-	MFP_PIN_GPIO14_2, /* LCD_FCLK   - LCDID[2] */
-	MFP_PIN_GPIO73,   /* LCD_CS_N   - LCDID[1] */
-	MFP_PIN_GPIO74,   /* LCD_VSYNC  - LCDID[0] */
-	/*
-	 * set the MFP_PIN_GPIO 14/15/17 to alternate function other than
-	 * GPIO to avoid input level confliction with 14_2, 15_2, 17_2
-	 */
-	MFP_PIN_GPIO14,
-	MFP_PIN_GPIO15,
-	MFP_PIN_GPIO17,
-};
-
-static int lcd_detect_mfpr[] __initdata = {
-	/* AF0, DS 1X, Pull Neither, Edge Clear */
-	0x8440, 0x8440, 0x8440, 0x8440, 0x8440, 0x8440, 0x8440,
-	0xc442, /* Backlight, Pull-Up, AF2 */
-	0x8445, /* AF5 */
-	0x8445, /* AF5 */
-};
-
-static void __init zylonite_detect_lcd_panel(void)
-{
-	unsigned long mfpr_save[ARRAY_SIZE(lcd_detect_pins)];
-	int i, gpio, id = 0;
-
-	/* save the original MFP settings of these pins and configure them
-	 * as GPIO Input, DS01X, Pull Neither, Edge Clear
-	 */
-	for (i = 0; i < ARRAY_SIZE(lcd_detect_pins); i++) {
-		mfpr_save[i] = pxa3xx_mfp_read(lcd_detect_pins[i]);
-		pxa3xx_mfp_write(lcd_detect_pins[i], lcd_detect_mfpr[i]);
-	}
-
-	for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
-		id = id << 1;
-		gpio = mfp_to_gpio(lcd_detect_pins[i]);
-		gpio_request(gpio, "LCD_ID_PINS");
-		gpio_direction_input(gpio);
-
-		if (gpio_get_value(gpio))
-			id = id | 0x1;
-		gpio_free(gpio);
-	}
-
-	/* lcd id, flush out bit 1 */
-	lcd_id = id & 0x3d;
-
-	/* lcd orientation, portrait or landscape */
-	lcd_orientation = (id >> 6) & 0x1;
-
-	/* restore the original MFP settings */
-	for (i = 0; i < ARRAY_SIZE(lcd_detect_pins); i++)
-		pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]);
-}
-
-void __init zylonite_pxa320_init(void)
-{
-	if (cpu_is_pxa320()) {
-		/* initialize MFP */
-		pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_cfg));
-
-		/* detect LCD panel */
-		zylonite_detect_lcd_panel();
-
-		/* GPIO pin assignment */
-		gpio_eth_irq	= mfp_to_gpio(MFP_PIN_GPIO9);
-		gpio_debug_led1	= mfp_to_gpio(MFP_PIN_GPIO1_2);
-		gpio_debug_led2	= mfp_to_gpio(MFP_PIN_GPIO4_2);
-
-		/* WM9713 IRQ */
-		wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO15);
-	}
-}
diff --git a/arch/arm/mach-s3c/Kconfig b/arch/arm/mach-s3c/Kconfig
index a64143574546..b3656109f1f7 100644
--- a/arch/arm/mach-s3c/Kconfig
+++ b/arch/arm/mach-s3c/Kconfig
@@ -2,13 +2,10 @@
 #
 # Copyright 2009 Simtec Electronics
 
-source "arch/arm/mach-s3c/Kconfig.s3c24xx"
 source "arch/arm/mach-s3c/Kconfig.s3c64xx"
 
 config PLAT_SAMSUNG
-	bool
-	depends on PLAT_S3C24XX || ARCH_S3C64XX
-	default y
+	def_bool ARCH_S3C64XX
 	select GENERIC_IRQ_CHIP
 	select NO_IOPORT_MAP
 	select SOC_SAMSUNG
@@ -16,9 +13,8 @@ config PLAT_SAMSUNG
 	  Base platform code for all Samsung SoC based systems
 
 config SAMSUNG_PM
-	bool
-	depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX)
-	default y
+	def_bool ARCH_S3C64XX
+	depends on PM
 	help
 	  Base platform power management code for samsung code
 
@@ -67,16 +63,6 @@ config S3C_GPIO_TRACK
 	  Internal configuration option to enable the s3c specific gpio
 	  chip tracking if the platform requires it.
 
-# ADC driver
-
-config S3C_ADC
-	bool "ADC common driver support"
-	depends on !ARCH_MULTIPLATFORM
-	help
-	  Core support for the ADC block found in the Samsung SoC systems
-	  for drivers such as the touchscreen and hwmon to use to share
-	  this resource.
-
 # device definitions to compile in
 
 config S3C_DEV_HSMMC
@@ -99,46 +85,11 @@ config S3C_DEV_HSMMC3
 	help
 	  Compile in platform device definitions for HSMMC channel 3
 
-config S3C_DEV_HWMON
-	bool
-	help
-	  Compile in platform device definitions for HWMON
-
 config S3C_DEV_I2C1
 	bool
 	help
 	  Compile in platform device definitions for I2C channel 1
 
-config S3C_DEV_I2C2
-	bool
-	help
-	  Compile in platform device definitions for I2C channel 2
-
-config S3C_DEV_I2C3
-	bool
-	help
-	  Compile in platform device definition for I2C controller 3
-
-config S3C_DEV_I2C4
-	bool
-	help
-	  Compile in platform device definition for I2C controller 4
-
-config S3C_DEV_I2C5
-	bool
-	help
-	  Compile in platform device definition for I2C controller 5
-
-config S3C_DEV_I2C6
-	bool
-	help
-	  Compile in platform device definition for I2C controller 6
-
-config S3C_DEV_I2C7
-	bool
-	help
-	  Compile in platform device definition for I2C controller 7
-
 config S3C_DEV_FB
 	bool
 	help
@@ -154,48 +105,12 @@ config S3C_DEV_USB_HSOTG
 	help
 	  Compile in platform device definition for USB high-speed OtG
 
-config S3C_DEV_WDT
-	bool
-	default y if ARCH_S3C24XX
-	help
-	  Compile in platform device definition for Watchdog Timer
-
-config S3C_DEV_NAND
-	bool
-	help
-	  Compile in platform device definition for NAND controller
-
-config S3C_DEV_ONENAND
-	bool
-	help
-	  Compile in platform device definition for OneNAND controller
-
-config S3C_DEV_RTC
-	bool
-	help
-	  Compile in platform device definition for RTC
-
-config SAMSUNG_DEV_ADC
-	bool
-	help
-	  Compile in platform device definition for ADC controller
-
-config SAMSUNG_DEV_IDE
-	bool
-	help
-	  Compile in platform device definitions for IDE
-
 config S3C64XX_DEV_SPI0
 	bool
 	help
 	  Compile in platform device definitions for S3C64XX's type
 	  SPI controller 0
 
-config SAMSUNG_DEV_TS
-	bool
-	help
-	  Common in platform device definitions for touchscreen device
-
 config SAMSUNG_DEV_KEYPAD
 	bool
 	help
@@ -203,7 +118,6 @@ config SAMSUNG_DEV_KEYPAD
 
 config SAMSUNG_DEV_PWM
 	bool
-	default y if ARCH_S3C24XX
 	help
 	  Compile in platform device definition for PWM Timer
 
diff --git a/arch/arm/mach-s3c/Kconfig.s3c24xx b/arch/arm/mach-s3c/Kconfig.s3c24xx
deleted file mode 100644
index 7287e173f30e..000000000000
--- a/arch/arm/mach-s3c/Kconfig.s3c24xx
+++ /dev/null
@@ -1,604 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Copyright (c) 2012 Samsung Electronics Co., Ltd.
-#		http://www.samsung.com/
-#
-# Copyright 2007 Simtec Electronics
-menuconfig ARCH_S3C24XX
-	bool "Samsung S3C24XX SoCs (deprecated, see help)"
-	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5
-	depends on CPU_LITTLE_ENDIAN
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select CLKSRC_SAMSUNG_PWM
-	select GPIO_SAMSUNG
-	select GPIOLIB
-	select S3C2410_WATCHDOG
-	select SAMSUNG_ATAGS
-	select WATCHDOG
-	help
-	  Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
-	  and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
-	  (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the
-	  Samsung SMDK2410 development board (and derivatives).
-
-	  The platform is deprecated and scheduled for removal. Please reach to
-	  the maintainers of the platform and linux-samsung-soc@vger.kernel.org if
-	  you still use it.
-	  Without such feedback, the platform will be removed after 2022.
-
-if ARCH_S3C24XX
-
-config PLAT_S3C24XX
-	def_bool y
-	select GPIOLIB
-	select NO_IOPORT_MAP
-	select S3C_DEV_NAND
-	select COMMON_CLK
-	help
-	  Base platform code for any Samsung S3C24XX device
-
-menu "Samsung S3C24XX SoCs Support"
-
-comment "S3C24XX SoCs"
-
-config CPU_S3C2410
-	bool "Samsung S3C2410"
-	depends on ARCH_MULTI_V4T
-	default y
-	select CPU_ARM920T
-	select S3C2410_COMMON_CLK
-	select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
-	select S3C2410_PM if PM
-	help
-	  Support for S3C2410 and S3C2410A family from the S3C24XX line
-	  of Samsung Mobile CPUs.
-
-config CPU_S3C2412
-	bool "Samsung S3C2412"
-	depends on ARCH_MULTI_V5
-	select CPU_ARM926T
-	select S3C2412_COMMON_CLK
-	select S3C2412_PM if PM_SLEEP
-	help
-	  Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
-
-config CPU_S3C2416
-	bool "Samsung S3C2416/S3C2450"
-	depends on ARCH_MULTI_V5
-	select CPU_ARM926T
-	select S3C2416_PM if PM_SLEEP
-	select S3C2443_COMMON_CLK
-	help
-	  Support for the S3C2416 SoC from the S3C24XX line
-
-config CPU_S3C2440
-	bool "Samsung S3C2440"
-	depends on ARCH_MULTI_V4T
-	select CPU_ARM920T
-	select S3C2410_COMMON_CLK
-	select S3C2410_PM if PM_SLEEP
-	help
-	  Support for S3C2440 Samsung Mobile CPU based systems.
-
-config CPU_S3C2442
-	bool "Samsung S3C2442"
-	depends on ARCH_MULTI_V4T
-	select CPU_ARM920T
-	select S3C2410_COMMON_CLK
-	select S3C2410_PM if PM_SLEEP
-	help
-	  Support for S3C2442 Samsung Mobile CPU based systems.
-
-config CPU_S3C244X
-	def_bool y
-	depends on CPU_S3C2440 || CPU_S3C2442
-
-config CPU_S3C2443
-	bool "Samsung S3C2443"
-	depends on ARCH_MULTI_V4T
-	select CPU_ARM920T
-	select S3C2443_COMMON_CLK
-	help
-	  Support for the S3C2443 SoC from the S3C24XX line
-
-# common code
-
-config S3C24XX_SMDK
-	bool
-	help
-	  Common machine code for SMDK2410 and SMDK2440
-
-config S3C24XX_SIMTEC_AUDIO
-	bool
-	depends on (ARCH_BAST || MACH_VR1000 || MACH_OSIRIS || MACH_ANUBIS)
-	default y
-	help
-	  Add audio devices for common Simtec S3C24XX boards
-
-config S3C24XX_SIMTEC_PM
-	bool
-	help
-	  Common power management code for systems that are
-	  compatible with the Simtec style of power management
-
-config S3C24XX_SIMTEC_USB
-	bool
-	help
-	  USB management code for common Simtec S3C24XX boards
-
-config S3C24XX_SETUP_TS
-	bool
-	help
-	  Compile in platform device definition for Samsung TouchScreen.
-
-config S3C2410_PM
-	bool
-	help
-	  Power Management code common to S3C2410 and better
-
-config S3C24XX_PLL
-	bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
-	depends on ARM_S3C24XX_CPUFREQ
-	help
-	  Compile in support for changing the PLL frequency from the
-	  S3C24XX series CPUfreq driver. The PLL takes time to settle
-	  after a frequency change, so by default it is not enabled.
-
-	  This also means that the PLL tables for the selected CPU(s) will
-	  be built which may increase the size of the kernel image.
-
-# cpu frequency items common between s3c2410 and s3c2440/s3c2442
-
-config S3C2410_IOTIMING
-	bool
-	depends on ARM_S3C24XX_CPUFREQ
-	help
-	  Internal node to select io timing code that is common to the s3c2410
-	  and s3c2440/s3c2442 cpu frequency support.
-
-# cpu frequency support common to s3c2412, s3c2413 and s3c2442
-
-config S3C2412_IOTIMING
-	bool
-	depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2412 || CPU_S3C2443)
-	help
-	  Intel node to select io timing code that is common to the s3c2412
-	  and the s3c2443.
-
-# cpu-specific sections
-
-if CPU_S3C2410
-
-config S3C2410_PLL
-	bool
-	depends on ARM_S3C2410_CPUFREQ && S3C24XX_PLL
-	default y
-	help
-	  Select the PLL table for the S3C2410
-
-config S3C24XX_SIMTEC_NOR
-	bool
-	help
-	  Internal node to specify machine has simtec NOR mapping
-
-config MACH_BAST_IDE
-	bool
-	select HAVE_PATA_PLATFORM
-	help
-	  Internal node for machines with an BAST style IDE
-	  interface
-
-comment "S3C2410 Boards"
-
-#
-# The "S3C2410 Boards" list is ordered alphabetically by option text.
-# (without ARCH_ or MACH_)
-#
-
-config MACH_AML_M5900
-	bool "AML M5900 Series"
-	select S3C24XX_SIMTEC_PM if PM
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the American Microsystems M5900 Series
-	  <http://www.amltd.com>
-
-config ARCH_BAST
-	bool "Simtec Electronics BAST (EB2410ITX)"
-	select MACH_BAST_IDE
-	select S3C2410_COMMON_DCLK
-	select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ
-	select S3C24XX_SIMTEC_NOR
-	select S3C24XX_SIMTEC_PM if PM
-	select S3C24XX_SIMTEC_USB
-	select S3C_DEV_HWMON
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the Simtec Electronics EB2410ITX
-	  development board (also known as BAST)
-
-config BAST_PC104_IRQ
-	bool "BAST PC104 IRQ support"
-	depends on ARCH_BAST
-	default y
-	help
-	  Say Y	here to enable the PC104 IRQ routing on the
-	  Simtec BAST (EB2410ITX)
-
-config ARCH_H1940
-	bool "IPAQ H1940"
-	select PM_H1940 if PM
-	select S3C24XX_SETUP_TS
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the HP IPAQ H1940
-
-config H1940BT
-	tristate "Control the state of H1940 bluetooth chip"
-	depends on ARCH_H1940
-	depends on RFKILL
-	help
-	  This is a simple driver that is able to control
-	  the state of built in bluetooth chip on h1940.
-
-config MACH_N30
-	bool "Acer N30 family"
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you want suppt for the Acer N30, Acer N35,
-	  Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
-
-config MACH_OTOM
-	bool "NexVision OTOM Board"
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the Nex Vision OTOM board
-
-config MACH_QT2410
-	bool "QT2410"
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the Armzone QT2410
-
-config ARCH_SMDK2410
-	bool "SMDK2410/A9M2410"
-	select S3C24XX_SMDK
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the SMDK2410 or the derived module A9M2410
-	  <http://www.fsforth.de>
-
-config MACH_TCT_HAMMER
-	bool "TCT Hammer Board"
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the TinCanTools Hammer Board
-	  <https://www.tincantools.com>
-
-config MACH_VR1000
-	bool "Thorcom VR1000"
-	select MACH_BAST_IDE
-	select S3C2410_COMMON_DCLK
-	select S3C24XX_SIMTEC_NOR
-	select S3C24XX_SIMTEC_PM if PM
-	select S3C24XX_SIMTEC_USB
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the Thorcom VR1000 board.
-
-endif # CPU_S3C2410
-
-config S3C2412_PM_SLEEP
-	bool
-	help
-	  Internal config node to apply sleep for S3C2412 power management.
-	  Can be selected by another SoCs such as S3C2416 with similar
-	  sleep procedure.
-
-if CPU_S3C2412
-
-config CPU_S3C2412_ONLY
-	bool
-	depends on !CPU_S3C2410 && !CPU_S3C2416 && !CPU_S3C2440 && \
-		   !CPU_S3C2442 && !CPU_S3C2443
-	default y
-
-config S3C2412_PM
-	bool
-	select S3C2412_PM_SLEEP
-	select SAMSUNG_WAKEMASK
-	help
-	  Internal config node to apply S3C2412 power management
-
-comment "S3C2412 Boards"
-
-#
-# The "S3C2412 Boards" list is ordered alphabetically by option text.
-# (without ARCH_ or MACH_)
-#
-
-config MACH_JIVE
-	bool "Logitech Jive"
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the Logitech Jive.
-
-config MACH_JIVE_SHOW_BOOTLOADER
-	bool "Allow access to bootloader partitions in MTD"
-	depends on MACH_JIVE
-
-config MACH_S3C2413
-	bool
-	help
-	  Internal node for S3C2413 version of SMDK2413, so that
-	  machine_is_s3c2413() will work when MACH_SMDK2413 is
-	  selected
-
-config MACH_SMDK2412
-	bool "SMDK2412"
-	select MACH_SMDK2413
-	help
-	  Say Y here if you are using an SMDK2412
-
-	  Note, this shares support with SMDK2413, so will automatically
-	  select MACH_SMDK2413.
-
-config MACH_SMDK2413
-	bool "SMDK2413"
-	select MACH_S3C2413
-	select S3C24XX_SMDK
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using an SMDK2413
-
-config MACH_VSTMS
-	bool "VMSTMS"
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using an VSTMS board
-
-endif # CPU_S3C2412
-
-if CPU_S3C2416
-
-config S3C2416_PM
-	bool
-	select S3C2412_PM_SLEEP
-	select SAMSUNG_WAKEMASK
-	help
-	  Internal config node to apply S3C2416 power management
-
-config S3C2416_SETUP_SDHCI
-	bool
-	select S3C2416_SETUP_SDHCI_GPIO
-	help
-	  Internal helper functions for S3C2416 based SDHCI systems
-
-config S3C2416_SETUP_SDHCI_GPIO
-	bool
-	help
-	  Common setup code for SDHCI gpio.
-
-comment "S3C2416 Boards"
-
-config MACH_SMDK2416
-	bool "SMDK2416"
-	select S3C2416_SETUP_SDHCI
-	select S3C24XX_SMDK
-	select S3C_DEV_FB
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using an SMDK2416
-
-config MACH_S3C2416_DT
-	bool "Samsung S3C2416 machine using devicetree"
-	select TIMER_OF
-	select USE_OF
-	select PINCTRL
-	select PINCTRL_S3C24XX
-	help
-	  Machine support for Samsung S3C2416 machines with device tree enabled.
-	  Select this if a fdt blob is available for the S3C2416 SoC based board.
-	  Note: This is under development and not all peripherals can be supported
-	  with this machine file.
-
-endif # CPU_S3C2416
-
-if CPU_S3C2440 || CPU_S3C2442
-
-config S3C2440_XTAL_12000000
-	bool
-	help
-	  Indicate that the build needs to support 12MHz system
-	  crystal.
-
-config S3C2440_XTAL_16934400
-	bool
-	help
-	  Indicate that the build needs to support 16.9344MHz system
-	  crystal.
-
-config S3C2440_PLL_12000000
-	bool
-	depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_12000000
-	default y if S3C24XX_PLL
-	help
-	  PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
-
-config S3C2440_PLL_16934400
-	bool
-	depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_16934400
-	default y if S3C24XX_PLL
-	help
-	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
-endif # CPU_S3C2440 || CPU_S3C2442
-
-if CPU_S3C2440
-
-comment "S3C2440 Boards"
-
-#
-# The "S3C2440 Boards" list is ordered alphabetically by option text.
-# (without ARCH_ or MACH_)
-#
-
-config MACH_ANUBIS
-	bool "Simtec Electronics ANUBIS"
-	select HAVE_PATA_PLATFORM
-	select S3C2410_COMMON_DCLK
-	select S3C2440_XTAL_12000000
-	select S3C24XX_SIMTEC_PM if PM
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the Simtec Electronics ANUBIS
-	  development system
-
-config MACH_AT2440EVB
-	bool "Avantech AT2440EVB development board"
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the AT2440EVB development board
-
-config MACH_MINI2440
-	bool "MINI2440 development board"
-	select LEDS_CLASS
-	select LEDS_TRIGGERS
-	select LEDS_TRIGGER_BACKLIGHT
-	select NEW_LEDS
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
-	  available via various sources. It can come with a 3.5" or 7" touch LCD.
-
-config MACH_NEXCODER_2440
-	bool "NexVision NEXCODER 2440 Light Board"
-	select S3C2440_XTAL_12000000
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
-
-config MACH_OSIRIS
-	bool "Simtec IM2440D20 (OSIRIS) module"
-	select S3C2410_COMMON_DCLK
-	select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
-	select S3C2440_XTAL_12000000
-	select S3C24XX_SIMTEC_PM if PM
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the Simtec IM2440D20 module, also
-	  known as the Osiris.
-
-config MACH_OSIRIS_DVS
-	tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
-	depends on MACH_OSIRIS
-	depends on TPS65010
-	help
-	  Say Y/M here if you want to have dynamic voltage scaling support
-	  on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
-
-	  The DVS driver alters the voltage supplied to the ARM core
-	  depending on the frequency it is running at. The driver itself
-	  does not do any of the frequency alteration, which is left up
-	  to the cpufreq driver.
-
-config MACH_RX3715
-	bool "HP iPAQ rx3715"
-	select PM_H1940 if PM
-	select S3C2440_XTAL_16934400
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using the HP iPAQ rx3715.
-
-config ARCH_S3C2440
-	bool "SMDK2440"
-	select S3C2440_XTAL_16934400
-	select S3C24XX_SMDK
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the SMDK2440.
-
-config SMDK2440_CPU2440
-	bool "SMDK2440 with S3C2440 CPU module"
-	default y if ARCH_S3C2440
-	select S3C2440_XTAL_16934400
-
-endif # CPU_S3C2440
-
-if CPU_S3C2442
-
-comment "S3C2442 Boards"
-
-#
-# The "S3C2442 Boards" list is ordered alphabetically by option text.
-# (without ARCH_ or MACH_)
-#
-
-config MACH_NEO1973_GTA02
-	bool "Openmoko GTA02 / Freerunner phone"
-	select I2C
-	select MFD_PCF50633
-	select PCF50633_GPIO
-	select POWER_SUPPLY
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
-
-config MACH_RX1950
-	bool "HP iPAQ rx1950"
-	select I2C
-	select PM_H1940 if PM
-	select S3C2410_COMMON_DCLK
-	select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
-	select S3C2440_XTAL_16934400
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you're using HP iPAQ rx1950
-
-endif # CPU_S3C2442
-
-if CPU_S3C2443 || CPU_S3C2416
-
-config S3C2443_SETUP_SPI
-	bool
-	help
-	  Common setup code for SPI GPIO configurations
-
-endif # CPU_S3C2443 || CPU_S3C2416
-
-if CPU_S3C2443
-
-comment "S3C2443 Boards"
-
-config MACH_SMDK2443
-	bool "SMDK2443"
-	select S3C24XX_SMDK
-	select S3C_DEV_HSMMC1
-	help
-	  Say Y here if you are using an SMDK2443
-
-endif # CPU_S3C2443
-
-config PM_H1940
-	bool
-	help
-	  Internal node for H1940 and related PM
-
-endmenu # "Samsung S3C24XX SoCs Support"
-
-endif # ARCH_S3C24XX
diff --git a/arch/arm/mach-s3c/Kconfig.s3c64xx b/arch/arm/mach-s3c/Kconfig.s3c64xx
index 0c1b91c3ac5f..01a7a8eec6e8 100644
--- a/arch/arm/mach-s3c/Kconfig.s3c64xx
+++ b/arch/arm/mach-s3c/Kconfig.s3c64xx
@@ -15,7 +15,6 @@ menuconfig ARCH_S3C64XX
 	select HAVE_TCM
 	select PLAT_SAMSUNG
 	select PM_GENERIC_DOMAINS if PM
-	select S3C_DEV_NAND if ATAGS
 	select S3C_GPIO_TRACK if ATAGS
 	select S3C2410_WATCHDOG
 	select SAMSUNG_ATAGS if ATAGS
@@ -54,17 +53,6 @@ config S3C64XX_SETUP_SDHCI
 	  Internal configuration for default SDHCI setup for S3C6400 and
 	  S3C6410 SoCs.
 
-config S3C64XX_DEV_ONENAND1
-	bool
-	help
-	  Compile in platform device definition for OneNAND1 controller
-
-config SAMSUNG_DEV_BACKLIGHT
-	bool
-	depends on SAMSUNG_DEV_PWM
-	help
-	  Compile in platform device definition LCD backlight with PWM Timer
-
 # platform specific device setup
 
 config S3C64XX_SETUP_I2C0
@@ -113,201 +101,6 @@ config S3C64XX_SETUP_USB_PHY
 
 # S36400 Macchine support
 
-config MACH_SMDK6400
-	bool "SMDK6400"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select CPU_S3C6400
-	select S3C64XX_SETUP_SDHCI
-	select S3C_DEV_HSMMC1
-	help
-	  Machine support for the Samsung SMDK6400
-
-# S3C6410 machine support
-
-config MACH_ANW6410
-	bool "A&W6410"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select CPU_S3C6410
-	select S3C64XX_SETUP_FB_24BPP
-	select S3C_DEV_FB
-	help
-	  Machine support for the A&W6410
-
-config MACH_MINI6410
-	bool "MINI6410"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select CPU_S3C6410
-	select S3C64XX_SETUP_FB_24BPP
-	select S3C64XX_SETUP_SDHCI
-	select S3C_DEV_FB
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	select SAMSUNG_DEV_ADC
-	select SAMSUNG_DEV_TS
-	help
-	  Machine support for the FriendlyARM MINI6410
-
-config MACH_REAL6410
-	bool "REAL6410"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select CPU_S3C6410
-	select S3C64XX_SETUP_FB_24BPP
-	select S3C64XX_SETUP_SDHCI
-	select S3C_DEV_FB
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	select SAMSUNG_DEV_ADC
-	select SAMSUNG_DEV_TS
-	help
-	  Machine support for the CoreWind REAL6410
-
-config MACH_SMDK6410
-	bool "SMDK6410"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select CPU_S3C6410
-	select S3C64XX_SETUP_FB_24BPP
-	select S3C64XX_SETUP_I2C1
-	select S3C64XX_SETUP_IDE
-	select S3C64XX_SETUP_KEYPAD
-	select S3C64XX_SETUP_SDHCI
-	select S3C64XX_SETUP_USB_PHY
-	select S3C_DEV_FB
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_I2C1
-	select S3C_DEV_RTC
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_USB_HSOTG
-	select S3C_DEV_WDT
-	select SAMSUNG_DEV_ADC
-	select SAMSUNG_DEV_BACKLIGHT
-	select SAMSUNG_DEV_IDE
-	select SAMSUNG_DEV_KEYPAD
-	select SAMSUNG_DEV_PWM
-	select SAMSUNG_DEV_TS
-	help
-	  Machine support for the Samsung SMDK6410
-
-# At least some of the SMDK6410s were shipped with the card detect
-# for the MMC/SD slots connected to the same input. This means that
-# either the boards need to be altered to have channel0 to an alternate
-# configuration or that only one slot can be used.
-
-choice
-	prompt "SMDK6410 MMC/SD slot setup"
-	depends on MACH_SMDK6410
-
-config SMDK6410_SD_CH0
-	bool "Use channel 0 only"
-	depends on MACH_SMDK6410
-	help
-	  Select CON7 (channel 0) as the MMC/SD slot, as
-	  at least some SMDK6410 boards come with the
-	  resistors fitted so that the card detects for
-	  channels 0 and 1 are the same.
-
-config SMDK6410_SD_CH1
-	bool "Use channel 1 only"
-	depends on MACH_SMDK6410
-	help
-	  Select CON6 (channel 1) as the MMC/SD slot, as
-	  at least some SMDK6410 boards come with the
-	  resistors fitted so that the card detects for
-	  channels 0 and 1 are the same.
-
-endchoice
-
-config SMDK6410_WM1190_EV1
-	bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
-	depends on MACH_SMDK6410
-	depends on I2C=y
-	select MFD_WM8350_I2C
-	select REGULATOR
-	select REGULATOR_WM8350
-	help
-	  The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
-	  and audio daughtercard for the Samsung SMDK6410 reference
-	  platform.  Enabling this option will build support for this
-	  module into the kernel.  The presence of the module will be
-	  detected at runtime so the resulting kernel can be used
-	  with or without the 1190-EV1 fitted.
-
-config SMDK6410_WM1192_EV1
-	bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
-	depends on MACH_SMDK6410
-	depends on I2C=y
-	select MFD_WM831X
-	select MFD_WM831X_I2C
-	select REGULATOR
-	select REGULATOR_WM831X
-	help
-	  The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
-	  daughtercard for the Samsung SMDK6410 reference platform.
-	  Enabling this option will build support for this module into
-	  the kernel.  The presence of the daughtercard will be
-	  detected at runtime so the resulting kernel can be used
-	  with or without the 1192-EV1 fitted.
-
-config MACH_NCP
-	bool "NCP"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select CPU_S3C6410
-	select S3C64XX_SETUP_I2C1
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_I2C1
-	help
-	  Machine support for the Samsung NCP
-
-config MACH_HMT
-	bool "Airgoo HMT"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select CPU_S3C6410
-	select S3C64XX_SETUP_FB_24BPP
-	select S3C_DEV_FB
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	select SAMSUNG_DEV_PWM
-	help
-	  Machine support for the Airgoo HMT
-
-config MACH_SMARTQ
-	bool
-	select CPU_S3C6410
-	select S3C64XX_SETUP_FB_24BPP
-	select S3C64XX_SETUP_SDHCI
-	select S3C64XX_SETUP_USB_PHY
-	select S3C_DEV_FB
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_HSMMC2
-	select S3C_DEV_HWMON
-	select S3C_DEV_RTC
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_USB_HSOTG
-	select SAMSUNG_DEV_ADC
-	select SAMSUNG_DEV_PWM
-	select SAMSUNG_DEV_TS
-	help
-	  Shared machine support for SmartQ 5/7
-
-config MACH_SMARTQ5
-	bool "SmartQ 5"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select MACH_SMARTQ
-	help
-	  Machine support for the SmartQ 5
-
-config MACH_SMARTQ7
-	bool "SmartQ 7"
-	depends on ATAGS && UNUSED_BOARD_FILES
-	select MACH_SMARTQ
-	help
-	  Machine support for the SmartQ 7
-
 config MACH_WLF_CRAGG_6410
 	bool "Wolfson Cragganmore 6410"
 	depends on ATAGS
@@ -327,11 +120,8 @@ config MACH_WLF_CRAGG_6410
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_I2C1
-	select S3C_DEV_RTC
 	select S3C_DEV_USB_HOST
 	select S3C_DEV_USB_HSOTG
-	select S3C_DEV_WDT
-	select SAMSUNG_DEV_ADC
 	select SAMSUNG_DEV_KEYPAD
 	select SAMSUNG_DEV_PWM
 	help
diff --git a/arch/arm/mach-s3c/Makefile b/arch/arm/mach-s3c/Makefile
index 7c7d3318fd61..988c49672715 100644
--- a/arch/arm/mach-s3c/Makefile
+++ b/arch/arm/mach-s3c/Makefile
@@ -2,26 +2,15 @@
 #
 # Copyright 2009 Simtec Electronics
 
-ifdef CONFIG_ARCH_S3C24XX
-include $(src)/Makefile.s3c24xx
-endif
-
-ifdef CONFIG_ARCH_S3C64XX
 include $(src)/Makefile.s3c64xx
-endif
 
 # Objects we always build independent of SoC choice
 
 obj-y				+= init.o cpu.o
 
-# ADC
-
-obj-$(CONFIG_S3C_ADC)	+= adc.o
-
 # devices
 
 obj-$(CONFIG_SAMSUNG_ATAGS)	+= platformdata.o
-
 obj-$(CONFIG_SAMSUNG_ATAGS)	+= devs.o
 obj-$(CONFIG_SAMSUNG_ATAGS)	+= dev-uart.o
 
@@ -31,5 +20,4 @@ obj-$(CONFIG_GPIO_SAMSUNG)     += gpio-samsung.o
 
 obj-$(CONFIG_SAMSUNG_PM)	+= pm.o pm-common.o
 obj-$(CONFIG_SAMSUNG_PM_GPIO)	+= pm-gpio.o
-
 obj-$(CONFIG_SAMSUNG_WAKEMASK)	+= wakeup-mask.o
diff --git a/arch/arm/mach-s3c/Makefile.s3c24xx b/arch/arm/mach-s3c/Makefile.s3c24xx
deleted file mode 100644
index 3483ab3a2b81..000000000000
--- a/arch/arm/mach-s3c/Makefile.s3c24xx
+++ /dev/null
@@ -1,102 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Copyright (c) 2012 Samsung Electronics Co., Ltd.
-#		http://www.samsung.com/
-#
-# Copyright 2007 Simtec Electronics
-
-# core
-
-obj-y				+= s3c24xx.o
-obj-y				+= irq-s3c24xx.o
-obj-$(CONFIG_SPI_S3C24XX_FIQ)	+= irq-s3c24xx-fiq.o
-obj-$(CONFIG_SPI_S3C24XX_FIQ)	+= irq-s3c24xx-fiq-exports.o
-
-obj-$(CONFIG_CPU_S3C2410)	+= s3c2410.o
-obj-$(CONFIG_S3C2410_PLL)	+= pll-s3c2410.o
-obj-$(CONFIG_S3C2410_PM)	+= pm-s3c2410.o sleep-s3c2410.o
-
-obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o
-obj-$(CONFIG_S3C2412_PM)	+= pm-s3c2412.o
-obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep-s3c2412.o
-
-obj-$(CONFIG_CPU_S3C2416)	+= s3c2416.o
-obj-$(CONFIG_S3C2416_PM)	+= pm-s3c2416.o
-
-obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o
-obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
-obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
-obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o
-
-obj-$(CONFIG_CPU_S3C2443)	+= s3c2443.o
-
-# PM
-
-obj-$(CONFIG_PM)		+= pm-s3c24xx.o
-obj-$(CONFIG_PM_SLEEP)		+= irq-pm-s3c24xx.o sleep-s3c24xx.o
-
-# common code
-
-obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += cpufreq-utils-s3c24xx.o
-
-obj-$(CONFIG_S3C2410_IOTIMING)	+= iotiming-s3c2410.o
-obj-$(CONFIG_S3C2412_IOTIMING)	+= iotiming-s3c2412.o
-
-#
-# machine support
-# following is ordered alphabetically by option text.
-#
-
-obj-$(CONFIG_MACH_AML_M5900)		+= mach-amlm5900.o
-obj-$(CONFIG_ARCH_BAST)			+= mach-bast.o
-obj-$(CONFIG_BAST_PC104_IRQ)		+= bast-irq.o
-obj-$(CONFIG_ARCH_H1940)		+= mach-h1940.o
-obj-$(CONFIG_H1940BT)			+= h1940-bluetooth.o
-obj-$(CONFIG_PM_H1940)			+= pm-h1940.o
-obj-$(CONFIG_MACH_N30)			+= mach-n30.o
-obj-$(CONFIG_MACH_OTOM)			+= mach-otom.o
-obj-$(CONFIG_MACH_QT2410)		+= mach-qt2410.o
-obj-$(CONFIG_ARCH_SMDK2410)		+= mach-smdk2410.o
-obj-$(CONFIG_MACH_TCT_HAMMER)		+= mach-tct_hammer.o
-obj-$(CONFIG_MACH_VR1000)		+= mach-vr1000.o
-
-obj-$(CONFIG_MACH_JIVE)			+= mach-jive.o
-obj-$(CONFIG_MACH_SMDK2413)		+= mach-smdk2413.o
-obj-$(CONFIG_MACH_VSTMS)		+= mach-vstms.o
-
-obj-$(CONFIG_MACH_SMDK2416)		+= mach-smdk2416.o
-obj-$(CONFIG_MACH_S3C2416_DT)		+= mach-s3c2416-dt.o
-
-obj-$(CONFIG_MACH_ANUBIS)		+= mach-anubis.o
-obj-$(CONFIG_MACH_AT2440EVB)		+= mach-at2440evb.o
-obj-$(CONFIG_MACH_MINI2440)		+= mach-mini2440.o
-obj-$(CONFIG_MACH_NEXCODER_2440)	+= mach-nexcoder.o
-obj-$(CONFIG_MACH_OSIRIS)		+= mach-osiris.o
-obj-$(CONFIG_MACH_RX3715)		+= mach-rx3715.o
-obj-$(CONFIG_ARCH_S3C2440)		+= mach-smdk2440.o
-
-obj-$(CONFIG_MACH_NEO1973_GTA02)	+= mach-gta02.o
-obj-$(CONFIG_MACH_RX1950)		+= mach-rx1950.o
-
-obj-$(CONFIG_MACH_SMDK2443)		+= mach-smdk2443.o
-
-# common bits of machine support
-
-obj-$(CONFIG_S3C24XX_SMDK)		+= common-smdk-s3c24xx.o
-obj-$(CONFIG_S3C24XX_SIMTEC_AUDIO)	+= simtec-audio.o
-obj-$(CONFIG_S3C24XX_SIMTEC_NOR)	+= simtec-nor.o
-obj-$(CONFIG_S3C24XX_SIMTEC_PM)		+= simtec-pm.o
-obj-$(CONFIG_S3C24XX_SIMTEC_USB)	+= simtec-usb.o
-
-# machine additions
-
-obj-$(CONFIG_MACH_BAST_IDE)		+= bast-ide.o
-obj-$(CONFIG_MACH_OSIRIS_DVS)		+= mach-osiris-dvs.o
-
-# device setup
-
-obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio-s3c24xx.o
-obj-$(CONFIG_S3C2443_SETUP_SPI)		+= setup-spi-s3c24xx.o
-obj-$(CONFIG_ARCH_S3C24XX)		+= setup-i2c-s3c24xx.o
-obj-$(CONFIG_S3C24XX_SETUP_TS)		+= setup-ts-s3c24xx.o
diff --git a/arch/arm/mach-s3c/Makefile.s3c64xx b/arch/arm/mach-s3c/Makefile.s3c64xx
index 21e919bf2cd1..61287ad2ea42 100644
--- a/arch/arm/mach-s3c/Makefile.s3c64xx
+++ b/arch/arm/mach-s3c/Makefile.s3c64xx
@@ -16,7 +16,6 @@ obj-$(CONFIG_PM_SLEEP)          += irq-pm-s3c64xx.o
 # Core
 
 obj-y				+= s3c64xx.o
-obj-$(CONFIG_CPU_S3C6400)	+= s3c6400.o
 obj-$(CONFIG_CPU_S3C6410)	+= s3c6410.o
 
 # DMA support
@@ -33,26 +32,12 @@ obj-y				+= dev-audio-s3c64xx.o
 obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP)	+= setup-fb-24bpp-s3c64xx.o
 obj-$(CONFIG_S3C64XX_SETUP_I2C0)	+= setup-i2c0-s3c64xx.o
 obj-$(CONFIG_S3C64XX_SETUP_I2C1)	+= setup-i2c1-s3c64xx.o
-obj-$(CONFIG_S3C64XX_SETUP_IDE)		+= setup-ide-s3c64xx.o
 obj-$(CONFIG_S3C64XX_SETUP_KEYPAD)	+= setup-keypad-s3c64xx.o
 obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio-s3c64xx.o
 obj-$(CONFIG_S3C64XX_SETUP_SPI)		+= setup-spi-s3c64xx.o
 obj-$(CONFIG_S3C64XX_SETUP_USB_PHY) += setup-usb-phy-s3c64xx.o
 
-obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT)	+= dev-backlight-s3c64xx.o
-
 # Machine support
-
-obj-$(CONFIG_MACH_ANW6410)		+= mach-anw6410.o
-obj-$(CONFIG_MACH_HMT)			+= mach-hmt.o
-obj-$(CONFIG_MACH_MINI6410)		+= mach-mini6410.o
-obj-$(CONFIG_MACH_NCP)			+= mach-ncp.o
-obj-$(CONFIG_MACH_REAL6410)		+= mach-real6410.o
-obj-$(CONFIG_MACH_SMARTQ)		+= mach-smartq.o
-obj-$(CONFIG_MACH_SMARTQ5)		+= mach-smartq5.o
-obj-$(CONFIG_MACH_SMARTQ7)		+= mach-smartq7.o
-obj-$(CONFIG_MACH_SMDK6400)		+= mach-smdk6400.o
-obj-$(CONFIG_MACH_SMDK6410)		+= mach-smdk6410.o
 obj-$(CONFIG_MACH_WLF_CRAGG_6410)	+= mach-crag6410.o mach-crag6410-module.o
 endif
 
diff --git a/arch/arm/mach-s3c/adc-core.h b/arch/arm/mach-s3c/adc-core.h
deleted file mode 100644
index 039f6862b6a7..000000000000
--- a/arch/arm/mach-s3c/adc-core.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Samsung ADC Controller core functions
- */
-
-#ifndef __ASM_PLAT_ADC_CORE_H
-#define __ASM_PLAT_ADC_CORE_H __FILE__
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
- */
-
-/* re-define device name depending on support. */
-static inline void s3c_adc_setname(char *name)
-{
-#if defined(CONFIG_SAMSUNG_DEV_ADC) || defined(CONFIG_PLAT_S3C24XX)
-	s3c_device_adc.name = name;
-#endif
-}
-
-#endif /* __ASM_PLAT_ADC_CORE_H */
diff --git a/arch/arm/mach-s3c/adc.c b/arch/arm/mach-s3c/adc.c
deleted file mode 100644
index 0232520d3c13..000000000000
--- a/arch/arm/mach-s3c/adc.c
+++ /dev/null
@@ -1,510 +0,0 @@
-// SPDX-License-Identifier: GPL-1.0+
-//
-// Copyright (c) 2008 Simtec Electronics
-//	http://armlinux.simtec.co.uk/
-//	Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
-//
-// Samsung ADC device core
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/mod_devicetable.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/list.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/regulator/consumer.h>
-
-#include "regs-adc.h"
-#include <linux/soc/samsung/s3c-adc.h>
-
-/* This driver is designed to control the usage of the ADC block between
- * the touchscreen and any other drivers that may need to use it, such as
- * the hwmon driver.
- *
- * Priority will be given to the touchscreen driver, but as this itself is
- * rate limited it should not starve other requests which are processed in
- * order that they are received.
- *
- * Each user registers to get a client block which uniquely identifies it
- * and stores information such as the necessary functions to callback when
- * action is required.
- */
-
-enum s3c_cpu_type {
-	TYPE_ADCV1, /* S3C24XX */
-	TYPE_ADCV11, /* S3C2443 */
-	TYPE_ADCV12, /* S3C2416, S3C2450 */
-	TYPE_ADCV2, /* S3C64XX */
-	TYPE_ADCV3, /* S5PV210, S5PC110, Exynos4210 */
-};
-
-struct s3c_adc_client {
-	struct platform_device	*pdev;
-	struct list_head	 pend;
-	wait_queue_head_t	*wait;
-
-	unsigned int		 nr_samples;
-	int			 result;
-	unsigned char		 is_ts;
-	unsigned char		 channel;
-
-	void	(*select_cb)(struct s3c_adc_client *c, unsigned selected);
-	void	(*convert_cb)(struct s3c_adc_client *c,
-			      unsigned val1, unsigned val2,
-			      unsigned *samples_left);
-};
-
-struct adc_device {
-	struct platform_device	*pdev;
-	struct platform_device	*owner;
-	struct clk		*clk;
-	struct s3c_adc_client	*cur;
-	struct s3c_adc_client	*ts_pend;
-	void __iomem		*regs;
-	spinlock_t		 lock;
-
-	unsigned int		 prescale;
-
-	int			 irq;
-	struct regulator	*vdd;
-};
-
-static struct adc_device *adc_dev;
-
-static LIST_HEAD(adc_pending);	/* protected by adc_device.lock */
-
-#define adc_dbg(_adc, msg...) dev_dbg(&(_adc)->pdev->dev, msg)
-
-static inline void s3c_adc_convert(struct adc_device *adc)
-{
-	unsigned con = readl(adc->regs + S3C2410_ADCCON);
-
-	con |= S3C2410_ADCCON_ENABLE_START;
-	writel(con, adc->regs + S3C2410_ADCCON);
-}
-
-static inline void s3c_adc_select(struct adc_device *adc,
-				  struct s3c_adc_client *client)
-{
-	unsigned con = readl(adc->regs + S3C2410_ADCCON);
-	enum s3c_cpu_type cpu = platform_get_device_id(adc->pdev)->driver_data;
-
-	client->select_cb(client, 1);
-
-	if (cpu == TYPE_ADCV1 || cpu == TYPE_ADCV2)
-		con &= ~S3C2410_ADCCON_MUXMASK;
-	con &= ~S3C2410_ADCCON_STDBM;
-	con &= ~S3C2410_ADCCON_STARTMASK;
-
-	if (!client->is_ts) {
-		if (cpu == TYPE_ADCV3)
-			writel(client->channel & 0xf, adc->regs + S5P_ADCMUX);
-		else if (cpu == TYPE_ADCV11 || cpu == TYPE_ADCV12)
-			writel(client->channel & 0xf,
-						adc->regs + S3C2443_ADCMUX);
-		else
-			con |= S3C2410_ADCCON_SELMUX(client->channel);
-	}
-
-	writel(con, adc->regs + S3C2410_ADCCON);
-}
-
-static void s3c_adc_dbgshow(struct adc_device *adc)
-{
-	adc_dbg(adc, "CON=%08x, TSC=%08x, DLY=%08x\n",
-		readl(adc->regs + S3C2410_ADCCON),
-		readl(adc->regs + S3C2410_ADCTSC),
-		readl(adc->regs + S3C2410_ADCDLY));
-}
-
-static void s3c_adc_try(struct adc_device *adc)
-{
-	struct s3c_adc_client *next = adc->ts_pend;
-
-	if (!next && !list_empty(&adc_pending)) {
-		next = list_first_entry(&adc_pending,
-					struct s3c_adc_client, pend);
-		list_del(&next->pend);
-	} else
-		adc->ts_pend = NULL;
-
-	if (next) {
-		adc_dbg(adc, "new client is %p\n", next);
-		adc->cur = next;
-		s3c_adc_select(adc, next);
-		s3c_adc_convert(adc);
-		s3c_adc_dbgshow(adc);
-	}
-}
-
-int s3c_adc_start(struct s3c_adc_client *client,
-		  unsigned int channel, unsigned int nr_samples)
-{
-	struct adc_device *adc = adc_dev;
-	unsigned long flags;
-
-	if (!adc) {
-		printk(KERN_ERR "%s: failed to find adc\n", __func__);
-		return -EINVAL;
-	}
-
-	spin_lock_irqsave(&adc->lock, flags);
-
-	if (client->is_ts && adc->ts_pend) {
-		spin_unlock_irqrestore(&adc->lock, flags);
-		return -EAGAIN;
-	}
-
-	client->channel = channel;
-	client->nr_samples = nr_samples;
-
-	if (client->is_ts)
-		adc->ts_pend = client;
-	else
-		list_add_tail(&client->pend, &adc_pending);
-
-	if (!adc->cur)
-		s3c_adc_try(adc);
-
-	spin_unlock_irqrestore(&adc->lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(s3c_adc_start);
-
-static void s3c_convert_done(struct s3c_adc_client *client,
-			     unsigned v, unsigned u, unsigned *left)
-{
-	client->result = v;
-	wake_up(client->wait);
-}
-
-int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch)
-{
-	DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake);
-	int ret;
-
-	client->convert_cb = s3c_convert_done;
-	client->wait = &wake;
-	client->result = -1;
-
-	ret = s3c_adc_start(client, ch, 1);
-	if (ret < 0)
-		goto err;
-
-	ret = wait_event_timeout(wake, client->result >= 0, HZ / 2);
-	if (client->result < 0) {
-		ret = -ETIMEDOUT;
-		goto err;
-	}
-
-	client->convert_cb = NULL;
-	return client->result;
-
-err:
-	return ret;
-}
-EXPORT_SYMBOL_GPL(s3c_adc_read);
-
-static void s3c_adc_default_select(struct s3c_adc_client *client,
-				   unsigned select)
-{
-}
-
-struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
-					void (*select)(struct s3c_adc_client *client,
-						       unsigned int selected),
-					void (*conv)(struct s3c_adc_client *client,
-						     unsigned d0, unsigned d1,
-						     unsigned *samples_left),
-					unsigned int is_ts)
-{
-	struct s3c_adc_client *client;
-
-	WARN_ON(!pdev);
-
-	if (!select)
-		select = s3c_adc_default_select;
-
-	if (!pdev)
-		return ERR_PTR(-EINVAL);
-
-	client = kzalloc(sizeof(*client), GFP_KERNEL);
-	if (!client)
-		return ERR_PTR(-ENOMEM);
-
-	client->pdev = pdev;
-	client->is_ts = is_ts;
-	client->select_cb = select;
-	client->convert_cb = conv;
-
-	return client;
-}
-EXPORT_SYMBOL_GPL(s3c_adc_register);
-
-void s3c_adc_release(struct s3c_adc_client *client)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&adc_dev->lock, flags);
-
-	/* We should really check that nothing is in progress. */
-	if (adc_dev->cur == client)
-		adc_dev->cur = NULL;
-	if (adc_dev->ts_pend == client)
-		adc_dev->ts_pend = NULL;
-	else {
-		struct list_head *p, *n;
-		struct s3c_adc_client *tmp;
-
-		list_for_each_safe(p, n, &adc_pending) {
-			tmp = list_entry(p, struct s3c_adc_client, pend);
-			if (tmp == client)
-				list_del(&tmp->pend);
-		}
-	}
-
-	if (adc_dev->cur == NULL)
-		s3c_adc_try(adc_dev);
-
-	spin_unlock_irqrestore(&adc_dev->lock, flags);
-	kfree(client);
-}
-EXPORT_SYMBOL_GPL(s3c_adc_release);
-
-static irqreturn_t s3c_adc_irq(int irq, void *pw)
-{
-	struct adc_device *adc = pw;
-	struct s3c_adc_client *client = adc->cur;
-	enum s3c_cpu_type cpu = platform_get_device_id(adc->pdev)->driver_data;
-	unsigned data0, data1;
-
-	if (!client) {
-		dev_warn(&adc->pdev->dev, "%s: no adc pending\n", __func__);
-		goto exit;
-	}
-
-	data0 = readl(adc->regs + S3C2410_ADCDAT0);
-	data1 = readl(adc->regs + S3C2410_ADCDAT1);
-	adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1);
-
-	client->nr_samples--;
-
-	if (cpu == TYPE_ADCV1 || cpu == TYPE_ADCV11) {
-		data0 &= 0x3ff;
-		data1 &= 0x3ff;
-	} else {
-		/* S3C2416/S3C64XX/S5P ADC resolution is 12-bit */
-		data0 &= 0xfff;
-		data1 &= 0xfff;
-	}
-
-	if (client->convert_cb)
-		(client->convert_cb)(client, data0, data1, &client->nr_samples);
-
-	if (client->nr_samples > 0) {
-		/* fire another conversion for this */
-
-		client->select_cb(client, 1);
-		s3c_adc_convert(adc);
-	} else {
-		spin_lock(&adc->lock);
-		(client->select_cb)(client, 0);
-		adc->cur = NULL;
-
-		s3c_adc_try(adc);
-		spin_unlock(&adc->lock);
-	}
-
-exit:
-	if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3) {
-		/* Clear ADC interrupt */
-		writel(0, adc->regs + S3C64XX_ADCCLRINT);
-	}
-	return IRQ_HANDLED;
-}
-
-static int s3c_adc_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct adc_device *adc;
-	enum s3c_cpu_type cpu = platform_get_device_id(pdev)->driver_data;
-	int ret;
-	unsigned tmp;
-
-	adc = devm_kzalloc(dev, sizeof(*adc), GFP_KERNEL);
-	if (!adc)
-		return -ENOMEM;
-
-	spin_lock_init(&adc->lock);
-
-	adc->pdev = pdev;
-	adc->prescale = S3C2410_ADCCON_PRSCVL(49);
-
-	adc->vdd = devm_regulator_get(dev, "vdd");
-	if (IS_ERR(adc->vdd)) {
-		dev_err(dev, "operating without regulator \"vdd\" .\n");
-		return PTR_ERR(adc->vdd);
-	}
-
-	adc->irq = platform_get_irq(pdev, 1);
-	if (adc->irq <= 0)
-		return -ENOENT;
-
-	ret = devm_request_irq(dev, adc->irq, s3c_adc_irq, 0, dev_name(dev),
-				adc);
-	if (ret < 0) {
-		dev_err(dev, "failed to attach adc irq\n");
-		return ret;
-	}
-
-	adc->clk = devm_clk_get(dev, "adc");
-	if (IS_ERR(adc->clk)) {
-		dev_err(dev, "failed to get adc clock\n");
-		return PTR_ERR(adc->clk);
-	}
-
-	adc->regs = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(adc->regs))
-		return PTR_ERR(adc->regs);
-
-	ret = regulator_enable(adc->vdd);
-	if (ret)
-		return ret;
-
-	clk_prepare_enable(adc->clk);
-
-	tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
-
-	/* Enable 12-bit ADC resolution */
-	if (cpu == TYPE_ADCV12)
-		tmp |= S3C2416_ADCCON_RESSEL;
-	if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3)
-		tmp |= S3C64XX_ADCCON_RESSEL;
-
-	writel(tmp, adc->regs + S3C2410_ADCCON);
-
-	dev_info(dev, "attached adc driver\n");
-
-	platform_set_drvdata(pdev, adc);
-	adc_dev = adc;
-
-	return 0;
-}
-
-static int s3c_adc_remove(struct platform_device *pdev)
-{
-	struct adc_device *adc = platform_get_drvdata(pdev);
-
-	clk_disable_unprepare(adc->clk);
-	regulator_disable(adc->vdd);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int s3c_adc_suspend(struct device *dev)
-{
-	struct adc_device *adc = dev_get_drvdata(dev);
-	unsigned long flags;
-	u32 con;
-
-	spin_lock_irqsave(&adc->lock, flags);
-
-	con = readl(adc->regs + S3C2410_ADCCON);
-	con |= S3C2410_ADCCON_STDBM;
-	writel(con, adc->regs + S3C2410_ADCCON);
-
-	disable_irq(adc->irq);
-	spin_unlock_irqrestore(&adc->lock, flags);
-	clk_disable(adc->clk);
-	regulator_disable(adc->vdd);
-
-	return 0;
-}
-
-static int s3c_adc_resume(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct adc_device *adc = platform_get_drvdata(pdev);
-	enum s3c_cpu_type cpu = platform_get_device_id(pdev)->driver_data;
-	int ret;
-	unsigned long tmp;
-
-	ret = regulator_enable(adc->vdd);
-	if (ret)
-		return ret;
-	clk_enable(adc->clk);
-	enable_irq(adc->irq);
-
-	tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
-
-	/* Enable 12-bit ADC resolution */
-	if (cpu == TYPE_ADCV12)
-		tmp |= S3C2416_ADCCON_RESSEL;
-	if (cpu == TYPE_ADCV2 || cpu == TYPE_ADCV3)
-		tmp |= S3C64XX_ADCCON_RESSEL;
-
-	writel(tmp, adc->regs + S3C2410_ADCCON);
-
-	return 0;
-}
-
-#else
-#define s3c_adc_suspend NULL
-#define s3c_adc_resume NULL
-#endif
-
-static const struct platform_device_id s3c_adc_driver_ids[] = {
-	{
-		.name           = "s3c24xx-adc",
-		.driver_data    = TYPE_ADCV1,
-	}, {
-		.name		= "s3c2443-adc",
-		.driver_data	= TYPE_ADCV11,
-	}, {
-		.name		= "s3c2416-adc",
-		.driver_data	= TYPE_ADCV12,
-	}, {
-		.name           = "s3c64xx-adc",
-		.driver_data    = TYPE_ADCV2,
-	}, {
-		.name		= "samsung-adc-v3",
-		.driver_data	= TYPE_ADCV3,
-	},
-	{ }
-};
-MODULE_DEVICE_TABLE(platform, s3c_adc_driver_ids);
-
-static const struct dev_pm_ops adc_pm_ops = {
-	.suspend	= s3c_adc_suspend,
-	.resume		= s3c_adc_resume,
-};
-
-static struct platform_driver s3c_adc_driver = {
-	.id_table	= s3c_adc_driver_ids,
-	.driver		= {
-		.name	= "s3c-adc",
-		.pm	= &adc_pm_ops,
-	},
-	.probe		= s3c_adc_probe,
-	.remove		= s3c_adc_remove,
-};
-
-static int __init adc_init(void)
-{
-	int ret;
-
-	ret = platform_driver_register(&s3c_adc_driver);
-	if (ret)
-		printk(KERN_ERR "%s: failed to add adc driver\n", __func__);
-
-	return ret;
-}
-
-module_init(adc_init);
diff --git a/arch/arm/mach-s3c/anubis.h b/arch/arm/mach-s3c/anubis.h
deleted file mode 100644
index 13847292e6c7..000000000000
--- a/arch/arm/mach-s3c/anubis.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * ANUBIS - CPLD control constants
- * ANUBIS - IRQ Number definitions
- * ANUBIS - Memory map definitions
- */
-
-#ifndef __MACH_S3C24XX_ANUBIS_H
-#define __MACH_S3C24XX_ANUBIS_H __FILE__
-
-/* CTRL2 - NAND WP control, IDE Reset assert/check */
-
-#define ANUBIS_CTRL1_NANDSEL		(0x3)
-
-/* IDREG - revision */
-
-#define ANUBIS_IDREG_REVMASK		(0x7)
-
-/* irq */
-
-#define ANUBIS_IRQ_IDE0			IRQ_EINT2
-#define ANUBIS_IRQ_IDE1			IRQ_EINT3
-#define ANUBIS_IRQ_ASIX			IRQ_EINT1
-
-/* map */
-
-/* start peripherals off after the S3C2410 */
-
-#define ANUBIS_IOADDR(x)		(S3C2410_ADDR((x) + 0x01800000))
-
-#define ANUBIS_PA_CPLD			(S3C2410_CS1 | (1<<26))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define ANUBIS_VA_CTRL1			ANUBIS_IOADDR(0x00000000)
-#define ANUBIS_PA_CTRL1			ANUBIS_PA_CPLD
-
-#define ANUBIS_VA_IDREG			ANUBIS_IOADDR(0x00300000)
-#define ANUBIS_PA_IDREG			(ANUBIS_PA_CPLD + (3 << 23))
-
-#define ANUBIS_IDEPRI			ANUBIS_IOADDR(0x01000000)
-#define ANUBIS_IDEPRIAUX		ANUBIS_IOADDR(0x01100000)
-#define ANUBIS_IDESEC			ANUBIS_IOADDR(0x01200000)
-#define ANUBIS_IDESECAUX		ANUBIS_IOADDR(0x01300000)
-
-#endif /* __MACH_S3C24XX_ANUBIS_H */
diff --git a/arch/arm/mach-s3c/ata-core-s3c64xx.h b/arch/arm/mach-s3c/ata-core-s3c64xx.h
deleted file mode 100644
index 4863ad9d3a42..000000000000
--- a/arch/arm/mach-s3c/ata-core-s3c64xx.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung CF-ATA Controller core functions
- */
-
-#ifndef __ASM_PLAT_ATA_CORE_S3C64XX_H
-#define __ASM_PLAT_ATA_CORE_S3C64XX_H __FILE__
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
-*/
-
-/* re-define device name depending on support. */
-static inline void s3c_cfcon_setname(char *name)
-{
-#ifdef CONFIG_SAMSUNG_DEV_IDE
-	s3c_device_cfcon.name = name;
-#endif
-}
-
-#endif /* __ASM_PLAT_ATA_CORE_S3C64XX_H */
diff --git a/arch/arm/mach-s3c/backlight-s3c64xx.h b/arch/arm/mach-s3c/backlight-s3c64xx.h
deleted file mode 100644
index 2a2b35821d58..000000000000
--- a/arch/arm/mach-s3c/backlight-s3c64xx.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *              http://www.samsung.com
- */
-
-#ifndef __ASM_PLAT_BACKLIGHT_S3C64XX_H
-#define __ASM_PLAT_BACKLIGHT_S3C64XX_H __FILE__
-
-/* samsung_bl_gpio_info - GPIO info for PWM Backlight control
- * @no:		GPIO number for PWM timer out
- * @func:	Special function of GPIO line for PWM timer
- */
-struct samsung_bl_gpio_info {
-	int no;
-	int func;
-};
-
-extern void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
-	struct platform_pwm_backlight_data *bl_data);
-
-#endif /* __ASM_PLAT_BACKLIGHT_S3C64XX_H */
diff --git a/arch/arm/mach-s3c/bast-ide.c b/arch/arm/mach-s3c/bast-ide.c
deleted file mode 100644
index 67f0adc1fec0..000000000000
--- a/arch/arm/mach-s3c/bast-ide.c
+++ /dev/null
@@ -1,82 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2007 Simtec Electronics
-//	http://www.simtec.co.uk/products/EB2410ITX/
-//	http://armlinux.simtec.co.uk/
-//	Ben Dooks <ben@simtec.co.uk>
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "map.h"
-#include "irqs.h"
-
-#include "bast.h"
-
-/* IDE ports */
-
-static struct pata_platform_info bast_ide_platdata = {
-	.ioport_shift	= 5,
-};
-
-static struct resource bast_ide0_resource[] = {
-	[0] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDEPRI, 8 * 0x20),
-	[1] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDEPRIAUX + (6 * 0x20), 0x20),
-	[2] = DEFINE_RES_IRQ(BAST_IRQ_IDE0),
-};
-
-static struct platform_device bast_device_ide0 = {
-	.name		= "pata_platform",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(bast_ide0_resource),
-	.resource	= bast_ide0_resource,
-	.dev		= {
-		.platform_data = &bast_ide_platdata,
-		.coherent_dma_mask = ~0,
-	}
-
-};
-
-static struct resource bast_ide1_resource[] = {
-	[0] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDESEC, 8 * 0x20),
-	[1] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDESECAUX + (6 * 0x20), 0x20),
-	[2] = DEFINE_RES_IRQ(BAST_IRQ_IDE1),
-};
-
-static struct platform_device bast_device_ide1 = {
-	.name		= "pata_platform",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(bast_ide1_resource),
-	.resource	= bast_ide1_resource,
-	.dev		= {
-		.platform_data = &bast_ide_platdata,
-		.coherent_dma_mask = ~0,
-	}
-};
-
-static struct platform_device *bast_ide_devices[] __initdata = {
-	&bast_device_ide0,
-	&bast_device_ide1,
-};
-
-static __init int bast_ide_init(void)
-{
-	if (machine_is_bast() || machine_is_vr1000())
-		return platform_add_devices(bast_ide_devices,
-					    ARRAY_SIZE(bast_ide_devices));
-
-	return 0;
-}
-
-fs_initcall(bast_ide_init);
diff --git a/arch/arm/mach-s3c/bast-irq.c b/arch/arm/mach-s3c/bast-irq.c
deleted file mode 100644
index cfc2ddc65513..000000000000
--- a/arch/arm/mach-s3c/bast-irq.c
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2003-2005 Simtec Electronics
-//   Ben Dooks <ben@simtec.co.uk>
-//
-// http://www.simtec.co.uk/products/EB2410ITX/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/mach/irq.h>
-
-#include "regs-irq.h"
-#include "irqs.h"
-
-#include "bast.h"
-
-#define irqdbf(x...)
-#define irqdbf2(x...)
-
-/* handle PC104 ISA interrupts from the system CPLD */
-
-/* table of ISA irq nos to the relevant mask... zero means
- * the irq is not implemented
-*/
-static const unsigned char bast_pc104_irqmasks[] = {
-	0,   /* 0 */
-	0,   /* 1 */
-	0,   /* 2 */
-	1,   /* 3 */
-	0,   /* 4 */
-	2,   /* 5 */
-	0,   /* 6 */
-	4,   /* 7 */
-	0,   /* 8 */
-	0,   /* 9 */
-	8,   /* 10 */
-	0,   /* 11 */
-	0,   /* 12 */
-	0,   /* 13 */
-	0,   /* 14 */
-	0,   /* 15 */
-};
-
-static const unsigned char bast_pc104_irqs[] = { 3, 5, 7, 10 };
-
-static void
-bast_pc104_mask(struct irq_data *data)
-{
-	unsigned long temp;
-
-	temp = __raw_readb(BAST_VA_PC104_IRQMASK);
-	temp &= ~bast_pc104_irqmasks[data->irq];
-	__raw_writeb(temp, BAST_VA_PC104_IRQMASK);
-}
-
-static void
-bast_pc104_maskack(struct irq_data *data)
-{
-	struct irq_desc *desc = irq_to_desc(BAST_IRQ_ISA);
-
-	bast_pc104_mask(data);
-	desc->irq_data.chip->irq_ack(&desc->irq_data);
-}
-
-static void
-bast_pc104_unmask(struct irq_data *data)
-{
-	unsigned long temp;
-
-	temp = __raw_readb(BAST_VA_PC104_IRQMASK);
-	temp |= bast_pc104_irqmasks[data->irq];
-	__raw_writeb(temp, BAST_VA_PC104_IRQMASK);
-}
-
-static struct irq_chip  bast_pc104_chip = {
-	.irq_mask	= bast_pc104_mask,
-	.irq_unmask	= bast_pc104_unmask,
-	.irq_ack	= bast_pc104_maskack
-};
-
-static void bast_irq_pc104_demux(struct irq_desc *desc)
-{
-	unsigned int stat;
-	unsigned int irqno;
-	int i;
-
-	stat = __raw_readb(BAST_VA_PC104_IRQREQ) & 0xf;
-
-	if (unlikely(stat == 0)) {
-		/* ack if we get an irq with nothing (ie, startup) */
-		desc->irq_data.chip->irq_ack(&desc->irq_data);
-	} else {
-		/* handle the IRQ */
-
-		for (i = 0; stat != 0; i++, stat >>= 1) {
-			if (stat & 1) {
-				irqno = bast_pc104_irqs[i];
-				generic_handle_irq(irqno);
-			}
-		}
-	}
-}
-
-static __init int bast_irq_init(void)
-{
-	unsigned int i;
-
-	if (machine_is_bast()) {
-		printk(KERN_INFO "BAST PC104 IRQ routing, Copyright 2005 Simtec Electronics\n");
-
-		/* zap all the IRQs */
-
-		__raw_writeb(0x0, BAST_VA_PC104_IRQMASK);
-
-		irq_set_chained_handler(BAST_IRQ_ISA, bast_irq_pc104_demux);
-
-		/* register our IRQs */
-
-		for (i = 0; i < 4; i++) {
-			unsigned int irqno = bast_pc104_irqs[i];
-
-			irq_set_chip_and_handler(irqno, &bast_pc104_chip,
-						 handle_level_irq);
-			irq_clear_status_flags(irqno, IRQ_NOREQUEST);
-		}
-	}
-
-	return 0;
-}
-
-arch_initcall(bast_irq_init);
diff --git a/arch/arm/mach-s3c/bast.h b/arch/arm/mach-s3c/bast.h
deleted file mode 100644
index a7726f93f5eb..000000000000
--- a/arch/arm/mach-s3c/bast.h
+++ /dev/null
@@ -1,194 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2003-2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * BAST - CPLD control constants
- * BAST - IRQ Number definitions
- * BAST - Memory map definitions
- */
-
-#ifndef __MACH_S3C24XX_BAST_H
-#define __MACH_S3C24XX_BAST_H __FILE__
-
-/* CTRL1 - Audio LR routing */
-
-#define BAST_CPLD_CTRL1_LRCOFF		(0x00)
-#define BAST_CPLD_CTRL1_LRCADC		(0x01)
-#define BAST_CPLD_CTRL1_LRCDAC		(0x02)
-#define BAST_CPLD_CTRL1_LRCARM		(0x03)
-#define BAST_CPLD_CTRL1_LRMASK		(0x03)
-
-/* CTRL2 - NAND WP control, IDE Reset assert/check */
-
-#define BAST_CPLD_CTRL2_WNAND		(0x04)
-#define BAST_CPLD_CTLR2_IDERST		(0x08)
-
-/* CTRL3 - rom write control, CPLD identity */
-
-#define BAST_CPLD_CTRL3_IDMASK		(0x0e)
-#define BAST_CPLD_CTRL3_ROMWEN		(0x01)
-
-/* CTRL4 - 8bit LCD interface control/status */
-
-#define BAST_CPLD_CTRL4_LLAT		(0x01)
-#define BAST_CPLD_CTRL4_LCDRW		(0x02)
-#define BAST_CPLD_CTRL4_LCDCMD		(0x04)
-#define BAST_CPLD_CTRL4_LCDE2		(0x01)
-
-/* CTRL5 - DMA routing */
-
-#define BAST_CPLD_DMA0_PRIIDE		(0)
-#define BAST_CPLD_DMA0_SECIDE		(1)
-#define BAST_CPLD_DMA0_ISA15		(2)
-#define BAST_CPLD_DMA0_ISA36		(3)
-
-#define BAST_CPLD_DMA1_PRIIDE		(0 << 2)
-#define BAST_CPLD_DMA1_SECIDE		(1 << 2)
-#define BAST_CPLD_DMA1_ISA15		(2 << 2)
-#define BAST_CPLD_DMA1_ISA36		(3 << 2)
-
-/* irq numbers to onboard peripherals */
-
-#define BAST_IRQ_USBOC			IRQ_EINT18
-#define BAST_IRQ_IDE0			IRQ_EINT16
-#define BAST_IRQ_IDE1			IRQ_EINT17
-#define BAST_IRQ_PCSERIAL1		IRQ_EINT15
-#define BAST_IRQ_PCSERIAL2		IRQ_EINT14
-#define BAST_IRQ_PCPARALLEL		IRQ_EINT13
-#define BAST_IRQ_ASIX			IRQ_EINT11
-#define BAST_IRQ_DM9000			IRQ_EINT10
-#define BAST_IRQ_ISA			IRQ_EINT9
-#define BAST_IRQ_SMALERT		IRQ_EINT8
-
-/* map */
-
-/*
- * ok, we've used up to 0x13000000, now we need to find space for the
- * peripherals that live in the nGCS[x] areas, which are quite numerous
- * in their space. We also have the board's CPLD to find register space
- * for.
- */
-
-#define BAST_IOADDR(x)			(S3C2410_ADDR((x) + 0x01300000))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define BAST_VA_CTRL1			BAST_IOADDR(0x00000000)
-#define BAST_PA_CTRL1			(S3C2410_CS5 | 0x7800000)
-
-#define BAST_VA_CTRL2			BAST_IOADDR(0x00100000)
-#define BAST_PA_CTRL2			(S3C2410_CS1 | 0x6000000)
-
-#define BAST_VA_CTRL3			BAST_IOADDR(0x00200000)
-#define BAST_PA_CTRL3			(S3C2410_CS1 | 0x6800000)
-
-#define BAST_VA_CTRL4			BAST_IOADDR(0x00300000)
-#define BAST_PA_CTRL4			(S3C2410_CS1 | 0x7000000)
-
-/* next, we have the PC104 ISA interrupt registers */
-
-#define BAST_PA_PC104_IRQREQ		(S3C2410_CS5 | 0x6000000)
-#define BAST_VA_PC104_IRQREQ		BAST_IOADDR(0x00400000)
-
-#define BAST_PA_PC104_IRQRAW		(S3C2410_CS5 | 0x6800000)
-#define BAST_VA_PC104_IRQRAW		BAST_IOADDR(0x00500000)
-
-#define BAST_PA_PC104_IRQMASK		(S3C2410_CS5 | 0x7000000)
-#define BAST_VA_PC104_IRQMASK		BAST_IOADDR(0x00600000)
-
-#define BAST_PA_LCD_RCMD1		(0x8800000)
-#define BAST_VA_LCD_RCMD1		BAST_IOADDR(0x00700000)
-
-#define BAST_PA_LCD_WCMD1		(0x8000000)
-#define BAST_VA_LCD_WCMD1		BAST_IOADDR(0x00800000)
-
-#define BAST_PA_LCD_RDATA1		(0x9800000)
-#define BAST_VA_LCD_RDATA1		BAST_IOADDR(0x00900000)
-
-#define BAST_PA_LCD_WDATA1		(0x9000000)
-#define BAST_VA_LCD_WDATA1		BAST_IOADDR(0x00A00000)
-
-#define BAST_PA_LCD_RCMD2		(0xA800000)
-#define BAST_VA_LCD_RCMD2		BAST_IOADDR(0x00B00000)
-
-#define BAST_PA_LCD_WCMD2		(0xA000000)
-#define BAST_VA_LCD_WCMD2		BAST_IOADDR(0x00C00000)
-
-#define BAST_PA_LCD_RDATA2		(0xB800000)
-#define BAST_VA_LCD_RDATA2		BAST_IOADDR(0x00D00000)
-
-#define BAST_PA_LCD_WDATA2		(0xB000000)
-#define BAST_VA_LCD_WDATA2		BAST_IOADDR(0x00E00000)
-
-
-/*
- * 0xE0000000 contains the IO space that is split by speed and
- * whether the access is for 8 or 16bit IO... this ensures that
- * the correct access is made
- *
- * 0x10000000 of space, partitioned as so:
- *
- * 0x00000000 to 0x04000000  8bit,  slow
- * 0x04000000 to 0x08000000  16bit, slow
- * 0x08000000 to 0x0C000000  16bit, net
- * 0x0C000000 to 0x10000000  16bit, fast
- *
- * each of these spaces has the following in:
- *
- * 0x00000000 to 0x01000000 16MB ISA IO space
- * 0x01000000 to 0x02000000 16MB ISA memory space
- * 0x02000000 to 0x02100000 1MB  IDE primary channel
- * 0x02100000 to 0x02200000 1MB  IDE primary channel aux
- * 0x02200000 to 0x02400000 1MB  IDE secondary channel
- * 0x02300000 to 0x02400000 1MB  IDE secondary channel aux
- * 0x02400000 to 0x02500000 1MB  ASIX ethernet controller
- * 0x02500000 to 0x02600000 1MB  Davicom DM9000 ethernet controller
- * 0x02600000 to 0x02700000 1MB  PC SuperIO controller
- *
- * the phyiscal layout of the zones are:
- *  nGCS2 - 8bit, slow
- *  nGCS3 - 16bit, slow
- *  nGCS4 - 16bit, net
- *  nGCS5 - 16bit, fast
- */
-
-#define BAST_VA_MULTISPACE		(0xE0000000)
-
-#define BAST_VA_ISAIO			(BAST_VA_MULTISPACE + 0x00000000)
-#define BAST_VA_ISAMEM			(BAST_VA_MULTISPACE + 0x01000000)
-#define BAST_VA_IDEPRI			(BAST_VA_MULTISPACE + 0x02000000)
-#define BAST_VA_IDEPRIAUX		(BAST_VA_MULTISPACE + 0x02100000)
-#define BAST_VA_IDESEC			(BAST_VA_MULTISPACE + 0x02200000)
-#define BAST_VA_IDESECAUX		(BAST_VA_MULTISPACE + 0x02300000)
-#define BAST_VA_ASIXNET			(BAST_VA_MULTISPACE + 0x02400000)
-#define BAST_VA_DM9000			(BAST_VA_MULTISPACE + 0x02500000)
-#define BAST_VA_SUPERIO			(BAST_VA_MULTISPACE + 0x02600000)
-
-#define BAST_VAM_CS2			(0x00000000)
-#define BAST_VAM_CS3			(0x04000000)
-#define BAST_VAM_CS4			(0x08000000)
-#define BAST_VAM_CS5			(0x0C000000)
-
-/* physical offset addresses for the peripherals */
-
-#define BAST_PA_ISAIO			(0x00000000)
-#define BAST_PA_ASIXNET			(0x01000000)
-#define BAST_PA_SUPERIO			(0x01800000)
-#define BAST_PA_IDEPRI			(0x02000000)
-#define BAST_PA_IDEPRIAUX		(0x02800000)
-#define BAST_PA_IDESEC			(0x03000000)
-#define BAST_PA_IDESECAUX		(0x03800000)
-#define BAST_PA_ISAMEM			(0x04000000)
-#define BAST_PA_DM9000			(0x05000000)
-
-/* some configurations for the peripherals */
-
-#define BAST_PCSIO			(BAST_VA_SUPERIO + BAST_VAM_CS2)
-
-#define BAST_ASIXNET_CS			BAST_VAM_CS5
-#define BAST_DM9000_CS			BAST_VAM_CS4
-
-#define BAST_IDE_CS	S3C2410_CS5
-
-#endif /* __MACH_S3C24XX_BAST_H */
diff --git a/arch/arm/mach-s3c/common-smdk-s3c24xx.c b/arch/arm/mach-s3c/common-smdk-s3c24xx.c
deleted file mode 100644
index 6d124bbd384c..000000000000
--- a/arch/arm/mach-s3c/common-smdk-s3c24xx.c
+++ /dev/null
@@ -1,228 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2006 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// Common code for SMDK2410 and SMDK2440 boards
-//
-// http://www.fluff.org/ben/smdk2440/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand-ecc-sw-hamming.h>
-#include <linux/mtd/partitions.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-#include <linux/platform_data/leds-s3c24xx.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-
-#include "gpio-cfg.h"
-#include "devs.h"
-#include "pm.h"
-
-#include "common-smdk-s3c24xx.h"
-
-/* LED devices */
-
-static struct gpiod_lookup_table smdk_led4_gpio_table = {
-	.dev_id = "s3c24xx_led.0",
-	.table = {
-		GPIO_LOOKUP("GPF", 4, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table smdk_led5_gpio_table = {
-	.dev_id = "s3c24xx_led.1",
-	.table = {
-		GPIO_LOOKUP("GPF", 5, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table smdk_led6_gpio_table = {
-	.dev_id = "s3c24xx_led.2",
-	.table = {
-		GPIO_LOOKUP("GPF", 6, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table smdk_led7_gpio_table = {
-	.dev_id = "s3c24xx_led.3",
-	.table = {
-		GPIO_LOOKUP("GPF", 7, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
-		{ },
-	},
-};
-
-static struct s3c24xx_led_platdata smdk_pdata_led4 = {
-	.name		= "led4",
-	.def_trigger	= "timer",
-};
-
-static struct s3c24xx_led_platdata smdk_pdata_led5 = {
-	.name		= "led5",
-	.def_trigger	= "nand-disk",
-};
-
-static struct s3c24xx_led_platdata smdk_pdata_led6 = {
-	.name		= "led6",
-};
-
-static struct s3c24xx_led_platdata smdk_pdata_led7 = {
-	.name		= "led7",
-};
-
-static struct platform_device smdk_led4 = {
-	.name		= "s3c24xx_led",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &smdk_pdata_led4,
-	},
-};
-
-static struct platform_device smdk_led5 = {
-	.name		= "s3c24xx_led",
-	.id		= 1,
-	.dev		= {
-		.platform_data = &smdk_pdata_led5,
-	},
-};
-
-static struct platform_device smdk_led6 = {
-	.name		= "s3c24xx_led",
-	.id		= 2,
-	.dev		= {
-		.platform_data = &smdk_pdata_led6,
-	},
-};
-
-static struct platform_device smdk_led7 = {
-	.name		= "s3c24xx_led",
-	.id		= 3,
-	.dev		= {
-		.platform_data = &smdk_pdata_led7,
-	},
-};
-
-/* NAND parititon from 2.4.18-swl5 */
-
-static struct mtd_partition smdk_default_nand_part[] = {
-	[0] = {
-		.name	= "Boot Agent",
-		.size	= SZ_16K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "S3C2410 flash partition 1",
-		.offset = 0,
-		.size	= SZ_2M,
-	},
-	[2] = {
-		.name	= "S3C2410 flash partition 2",
-		.offset = SZ_4M,
-		.size	= SZ_4M,
-	},
-	[3] = {
-		.name	= "S3C2410 flash partition 3",
-		.offset	= SZ_8M,
-		.size	= SZ_2M,
-	},
-	[4] = {
-		.name	= "S3C2410 flash partition 4",
-		.offset = SZ_1M * 10,
-		.size	= SZ_4M,
-	},
-	[5] = {
-		.name	= "S3C2410 flash partition 5",
-		.offset	= SZ_1M * 14,
-		.size	= SZ_1M * 10,
-	},
-	[6] = {
-		.name	= "S3C2410 flash partition 6",
-		.offset	= SZ_1M * 24,
-		.size	= SZ_1M * 24,
-	},
-	[7] = {
-		.name	= "S3C2410 flash partition 7",
-		.offset = SZ_1M * 48,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct s3c2410_nand_set smdk_nand_sets[] = {
-	[0] = {
-		.name		= "NAND",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(smdk_default_nand_part),
-		.partitions	= smdk_default_nand_part,
-	},
-};
-
-/* choose a set of timings which should suit most 512Mbit
- * chips and beyond.
-*/
-
-static struct s3c2410_platform_nand smdk_nand_info = {
-	.tacls		= 20,
-	.twrph0		= 60,
-	.twrph1		= 20,
-	.nr_sets	= ARRAY_SIZE(smdk_nand_sets),
-	.sets		= smdk_nand_sets,
-	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
-};
-
-/* devices we initialise */
-
-static struct platform_device __initdata *smdk_devs[] = {
-	&s3c_device_nand,
-	&smdk_led4,
-	&smdk_led5,
-	&smdk_led6,
-	&smdk_led7,
-};
-
-void __init smdk_machine_init(void)
-{
-	if (machine_is_smdk2443())
-		smdk_nand_info.twrph0 = 50;
-
-	s3c_nand_set_platdata(&smdk_nand_info);
-
-	/* Disable pull-up on the LED lines */
-	s3c_gpio_setpull(S3C2410_GPF(4), S3C_GPIO_PULL_NONE);
-	s3c_gpio_setpull(S3C2410_GPF(5), S3C_GPIO_PULL_NONE);
-	s3c_gpio_setpull(S3C2410_GPF(6), S3C_GPIO_PULL_NONE);
-	s3c_gpio_setpull(S3C2410_GPF(7), S3C_GPIO_PULL_NONE);
-
-	/* Add lookups for the lines */
-	gpiod_add_lookup_table(&smdk_led4_gpio_table);
-	gpiod_add_lookup_table(&smdk_led5_gpio_table);
-	gpiod_add_lookup_table(&smdk_led6_gpio_table);
-	gpiod_add_lookup_table(&smdk_led7_gpio_table);
-
-	platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs));
-
-	s3c_pm_init();
-}
diff --git a/arch/arm/mach-s3c/common-smdk-s3c24xx.h b/arch/arm/mach-s3c/common-smdk-s3c24xx.h
deleted file mode 100644
index c0352b06e435..000000000000
--- a/arch/arm/mach-s3c/common-smdk-s3c24xx.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Common code for SMDK2410 and SMDK2440 boards
- *
- * http://www.fluff.org/ben/smdk2440/
- */
-
-extern void smdk_machine_init(void);
diff --git a/arch/arm/mach-s3c/cpu.h b/arch/arm/mach-s3c/cpu.h
index 20ff98d05c53..d0adc9b40e25 100644
--- a/arch/arm/mach-s3c/cpu.h
+++ b/arch/arm/mach-s3c/cpu.h
@@ -16,15 +16,6 @@
 
 extern unsigned long samsung_cpu_id;
 
-#define S3C2410_CPU_ID		0x32410000
-#define S3C2410_CPU_MASK	0xFFFFFFFF
-
-#define S3C24XX_CPU_ID		0x32400000
-#define S3C24XX_CPU_MASK	0xFFF00000
-
-#define S3C2412_CPU_ID		0x32412000
-#define S3C2412_CPU_MASK	0xFFFFF000
-
 #define S3C6400_CPU_ID		0x36400000
 #define S3C6410_CPU_ID		0x36410000
 #define S3C64XX_CPU_MASK	0xFFFFF000
@@ -38,29 +29,9 @@ static inline int is_samsung_##name(void)	\
 	return ((samsung_cpu_id & mask) == (id & mask));	\
 }
 
-IS_SAMSUNG_CPU(s3c2410, S3C2410_CPU_ID, S3C2410_CPU_MASK)
-IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK)
-IS_SAMSUNG_CPU(s3c2412, S3C2412_CPU_ID, S3C2412_CPU_MASK)
 IS_SAMSUNG_CPU(s3c6400, S3C6400_CPU_ID, S3C64XX_CPU_MASK)
 IS_SAMSUNG_CPU(s3c6410, S3C6410_CPU_ID, S3C64XX_CPU_MASK)
 
-#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
-    defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \
-    defined(CONFIG_CPU_S3C2442) || defined(CONFIG_CPU_S3C244X) || \
-    defined(CONFIG_CPU_S3C2443)
-# define soc_is_s3c24xx()	is_samsung_s3c24xx()
-# define soc_is_s3c2410()	is_samsung_s3c2410()
-#else
-# define soc_is_s3c24xx()	0
-# define soc_is_s3c2410()	0
-#endif
-
-#if defined(CONFIG_CPU_S3C2412)
-# define soc_is_s3c2412()	is_samsung_s3c2412()
-#else
-# define soc_is_s3c2412()	0
-#endif
-
 #if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
 # define soc_is_s3c6400()	is_samsung_s3c6400()
 # define soc_is_s3c6410()	is_samsung_s3c6410()
@@ -71,12 +42,6 @@ IS_SAMSUNG_CPU(s3c6410, S3C6410_CPU_ID, S3C64XX_CPU_MASK)
 # define soc_is_s3c64xx()	0
 #endif
 
-#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
-
-#ifndef KHZ
-#define KHZ (1000)
-#endif
-
 #ifndef MHZ
 #define MHZ (1000*1000)
 #endif
@@ -96,7 +61,6 @@ struct cpu_table {
 	unsigned long	idmask;
 	void		(*map_io)(void);
 	void		(*init_uarts)(struct s3c2410_uartcfg *cfg, int no);
-	void		(*init_clocks)(int xtal);
 	int		(*init)(void);
 	const char	*name;
 };
@@ -105,24 +69,13 @@ extern void s3c_init_cpu(unsigned long idcode,
 			 struct cpu_table *cpus, unsigned int cputab_size);
 
 /* core initialisation functions */
-
-extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
-
 extern void s3c64xx_init_cpu(void);
 
 extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c24xx_init_clocks(int xtal);
-
 extern void s3c24xx_init_uartdevs(char *name,
 				  struct s3c24xx_uart_resources *res,
 				  struct s3c2410_uartcfg *cfg, int no);
 
-extern struct syscore_ops s3c2410_pm_syscore_ops;
-extern struct syscore_ops s3c2412_pm_syscore_ops;
-extern struct syscore_ops s3c2416_pm_syscore_ops;
-extern struct syscore_ops s3c244x_pm_syscore_ops;
-
 extern struct bus_type s3c6410_subsys;
 
 #endif
diff --git a/arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c b/arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c
deleted file mode 100644
index c1784d8facdf..000000000000
--- a/arch/arm/mach-s3c/cpufreq-utils-s3c24xx.c
+++ /dev/null
@@ -1,94 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2009 Simtec Electronics
-//	http://armlinux.simtec.co.uk/
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// S3C24XX CPU Frequency scaling - utils for S3C2410/S3C2440/S3C2442
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/cpufreq.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-
-#include "map.h"
-#include "regs-clock.h"
-
-#include <linux/soc/samsung/s3c-cpufreq-core.h>
-
-#include "regs-mem-s3c24xx.h"
-
-/**
- * s3c2410_cpufreq_setrefresh - set SDRAM refresh value
- * @cfg: The frequency configuration
- *
- * Set the SDRAM refresh value appropriately for the configured
- * frequency.
- */
-void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
-{
-	struct s3c_cpufreq_board *board = cfg->board;
-	unsigned long refresh;
-	unsigned long refval;
-
-	/* Reduce both the refresh time (in ns) and the frequency (in MHz)
-	 * down to ensure that we do not overflow 32 bit numbers.
-	 *
-	 * This should work for HCLK up to 133MHz and refresh period up
-	 * to 30usec.
-	 */
-
-	refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
-	refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale  */
-	refresh = (1 << 11) + 1 - refresh;
-
-	s3c_freq_dbg("%s: refresh value %lu\n", __func__, refresh);
-
-	refval = __raw_readl(S3C2410_REFRESH);
-	refval &= ~((1 << 12) - 1);
-	refval |= refresh;
-	__raw_writel(refval, S3C2410_REFRESH);
-}
-
-/**
- * s3c2410_set_fvco - set the PLL value
- * @cfg: The frequency configuration
- */
-void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg)
-{
-	if (!IS_ERR(cfg->mpll))
-		clk_set_rate(cfg->mpll, cfg->pll.frequency);
-}
-
-#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
-u32 s3c2440_read_camdivn(void)
-{
-	return __raw_readl(S3C2440_CAMDIVN);
-}
-
-void s3c2440_write_camdivn(u32 camdiv)
-{
-	__raw_writel(camdiv, S3C2440_CAMDIVN);
-}
-#endif
-
-u32 s3c24xx_read_clkdivn(void)
-{
-	return __raw_readl(S3C2410_CLKDIVN);
-}
-
-void s3c24xx_write_clkdivn(u32 clkdiv)
-{
-	__raw_writel(clkdiv, S3C2410_CLKDIVN);
-}
-
-u32 s3c24xx_read_mpllcon(void)
-{
-	return __raw_readl(S3C2410_MPLLCON);
-}
-
-void s3c24xx_write_locktime(u32 locktime)
-{
-	return __raw_writel(locktime, S3C2410_LOCKTIME);
-}
diff --git a/arch/arm/mach-s3c/dev-audio-s3c64xx.c b/arch/arm/mach-s3c/dev-audio-s3c64xx.c
index 909e82c148ba..7ce119dc3a72 100644
--- a/arch/arm/mach-s3c/dev-audio-s3c64xx.c
+++ b/arch/arm/mach-s3c/dev-audio-s3c64xx.c
@@ -83,130 +83,3 @@ struct platform_device s3c64xx_device_iis1 = {
 	},
 };
 EXPORT_SYMBOL(s3c64xx_device_iis1);
-
-static struct resource s3c64xx_iisv4_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C64XX_PA_IISV4, SZ_256),
-};
-
-static struct s3c_audio_pdata i2sv4_pdata = {
-	.cfg_gpio = s3c64xx_i2s_cfg_gpio,
-	.type = {
-		.quirks = QUIRK_PRI_6CHAN,
-	},
-};
-
-struct platform_device s3c64xx_device_iisv4 = {
-	.name = "samsung-i2s",
-	.id = 2,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_iisv4_resource),
-	.resource	  = s3c64xx_iisv4_resource,
-	.dev = {
-		.platform_data = &i2sv4_pdata,
-	},
-};
-EXPORT_SYMBOL(s3c64xx_device_iisv4);
-
-
-/* PCM Controller platform_devices */
-
-static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev)
-{
-	unsigned int base;
-
-	switch (pdev->id) {
-	case 0:
-		base = S3C64XX_GPD(0);
-		break;
-	case 1:
-		base = S3C64XX_GPE(0);
-		break;
-	default:
-		printk(KERN_DEBUG "Invalid PCM Controller number: %d\n",
-			pdev->id);
-		return -EINVAL;
-	}
-
-	s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(2));
-	return 0;
-}
-
-static struct resource s3c64xx_pcm0_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C64XX_PA_PCM0, SZ_256),
-};
-
-static struct s3c_audio_pdata s3c_pcm0_pdata = {
-	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
-};
-
-struct platform_device s3c64xx_device_pcm0 = {
-	.name		  = "samsung-pcm",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_pcm0_resource),
-	.resource	  = s3c64xx_pcm0_resource,
-	.dev = {
-		.platform_data = &s3c_pcm0_pdata,
-	},
-};
-EXPORT_SYMBOL(s3c64xx_device_pcm0);
-
-static struct resource s3c64xx_pcm1_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C64XX_PA_PCM1, SZ_256),
-};
-
-static struct s3c_audio_pdata s3c_pcm1_pdata = {
-	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
-};
-
-struct platform_device s3c64xx_device_pcm1 = {
-	.name		  = "samsung-pcm",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_pcm1_resource),
-	.resource	  = s3c64xx_pcm1_resource,
-	.dev = {
-		.platform_data = &s3c_pcm1_pdata,
-	},
-};
-EXPORT_SYMBOL(s3c64xx_device_pcm1);
-
-/* AC97 Controller platform devices */
-
-static int s3c64xx_ac97_cfg_gpd(struct platform_device *pdev)
-{
-	return s3c_gpio_cfgpin_range(S3C64XX_GPD(0), 5, S3C_GPIO_SFN(4));
-}
-
-static int s3c64xx_ac97_cfg_gpe(struct platform_device *pdev)
-{
-	return s3c_gpio_cfgpin_range(S3C64XX_GPE(0), 5, S3C_GPIO_SFN(4));
-}
-
-static struct resource s3c64xx_ac97_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C64XX_PA_AC97, SZ_256),
-	[1] = DEFINE_RES_IRQ(IRQ_AC97),
-};
-
-static struct s3c_audio_pdata s3c_ac97_pdata = {
-};
-
-static u64 s3c64xx_ac97_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s3c64xx_device_ac97 = {
-	.name		  = "samsung-ac97",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_ac97_resource),
-	.resource	  = s3c64xx_ac97_resource,
-	.dev = {
-		.platform_data = &s3c_ac97_pdata,
-		.dma_mask = &s3c64xx_ac97_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-EXPORT_SYMBOL(s3c64xx_device_ac97);
-
-void __init s3c64xx_ac97_setup_gpio(int num)
-{
-	if (num == S3C64XX_AC97_GPD)
-		s3c_ac97_pdata.cfg_gpio = s3c64xx_ac97_cfg_gpd;
-	else
-		s3c_ac97_pdata.cfg_gpio = s3c64xx_ac97_cfg_gpe;
-}
diff --git a/arch/arm/mach-s3c/dev-backlight-s3c64xx.c b/arch/arm/mach-s3c/dev-backlight-s3c64xx.c
deleted file mode 100644
index 65488b61e50c..000000000000
--- a/arch/arm/mach-s3c/dev-backlight-s3c64xx.c
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2011 Samsung Electronics Co., Ltd.
-//              http://www.samsung.com
-//
-// Common infrastructure for PWM Backlight for Samsung boards
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/pwm_backlight.h>
-
-#include "devs.h"
-#include "gpio-cfg.h"
-
-#include "backlight-s3c64xx.h"
-
-struct samsung_bl_drvdata {
-	struct platform_pwm_backlight_data plat_data;
-	struct samsung_bl_gpio_info *gpio_info;
-};
-
-static int samsung_bl_init(struct device *dev)
-{
-	int ret = 0;
-	struct platform_pwm_backlight_data *pdata = dev->platform_data;
-	struct samsung_bl_drvdata *drvdata = container_of(pdata,
-					struct samsung_bl_drvdata, plat_data);
-	struct samsung_bl_gpio_info *bl_gpio_info = drvdata->gpio_info;
-
-	ret = gpio_request(bl_gpio_info->no, "Backlight");
-	if (ret) {
-		printk(KERN_ERR "failed to request GPIO for LCD Backlight\n");
-		return ret;
-	}
-
-	/* Configure GPIO pin with specific GPIO function for PWM timer */
-	s3c_gpio_cfgpin(bl_gpio_info->no, bl_gpio_info->func);
-
-	return 0;
-}
-
-static void samsung_bl_exit(struct device *dev)
-{
-	struct platform_pwm_backlight_data *pdata = dev->platform_data;
-	struct samsung_bl_drvdata *drvdata = container_of(pdata,
-					struct samsung_bl_drvdata, plat_data);
-	struct samsung_bl_gpio_info *bl_gpio_info = drvdata->gpio_info;
-
-	s3c_gpio_cfgpin(bl_gpio_info->no, S3C_GPIO_OUTPUT);
-	gpio_free(bl_gpio_info->no);
-}
-
-/* Initialize few important fields of platform_pwm_backlight_data
- * structure with default values. These fields can be overridden by
- * board-specific values sent from machine file.
- * For ease of operation, these fields are initialized with values
- * used by most samsung boards.
- * Users has the option of sending info about other parameters
- * for their specific boards
- */
-
-static struct samsung_bl_drvdata samsung_dfl_bl_data __initdata = {
-	.plat_data = {
-		.max_brightness = 255,
-		.dft_brightness = 255,
-		.init           = samsung_bl_init,
-		.exit           = samsung_bl_exit,
-	},
-};
-
-static struct platform_device samsung_dfl_bl_device __initdata = {
-	.name		= "pwm-backlight",
-};
-
-/* samsung_bl_set - Set board specific data (if any) provided by user for
- * PWM Backlight control and register specific PWM and backlight device.
- * @gpio_info:	structure containing GPIO info for PWM timer
- * @bl_data:	structure containing Backlight control data
- */
-void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
-	struct platform_pwm_backlight_data *bl_data)
-{
-	int ret = 0;
-	struct platform_device *samsung_bl_device;
-	struct samsung_bl_drvdata *samsung_bl_drvdata;
-	struct platform_pwm_backlight_data *samsung_bl_data;
-
-	samsung_bl_device = kmemdup(&samsung_dfl_bl_device,
-			sizeof(struct platform_device), GFP_KERNEL);
-	if (!samsung_bl_device)
-		return;
-
-	samsung_bl_drvdata = kmemdup(&samsung_dfl_bl_data,
-				sizeof(samsung_dfl_bl_data), GFP_KERNEL);
-	if (!samsung_bl_drvdata)
-		goto err_data;
-
-	samsung_bl_device->dev.platform_data = &samsung_bl_drvdata->plat_data;
-	samsung_bl_drvdata->gpio_info = gpio_info;
-	samsung_bl_data = &samsung_bl_drvdata->plat_data;
-
-	/* Copy board specific data provided by user */
-	samsung_bl_device->dev.parent = &samsung_device_pwm.dev;
-
-	if (bl_data->max_brightness)
-		samsung_bl_data->max_brightness = bl_data->max_brightness;
-	if (bl_data->dft_brightness)
-		samsung_bl_data->dft_brightness = bl_data->dft_brightness;
-	if (bl_data->lth_brightness)
-		samsung_bl_data->lth_brightness = bl_data->lth_brightness;
-	if (bl_data->init)
-		samsung_bl_data->init = bl_data->init;
-	if (bl_data->notify)
-		samsung_bl_data->notify = bl_data->notify;
-	if (bl_data->notify_after)
-		samsung_bl_data->notify_after = bl_data->notify_after;
-	if (bl_data->exit)
-		samsung_bl_data->exit = bl_data->exit;
-	if (bl_data->check_fb)
-		samsung_bl_data->check_fb = bl_data->check_fb;
-
-	/* Register the Backlight dev */
-	ret = platform_device_register(samsung_bl_device);
-	if (ret) {
-		printk(KERN_ERR "failed to register backlight device: %d\n", ret);
-		goto err_plat_reg2;
-	}
-
-	return;
-
-err_plat_reg2:
-	kfree(samsung_bl_data);
-err_data:
-	kfree(samsung_bl_device);
-}
diff --git a/arch/arm/mach-s3c/devs.c b/arch/arm/mach-s3c/devs.c
index 9ac07c023adf..8c26d592d2a3 100644
--- a/arch/arm/mach-s3c/devs.c
+++ b/arch/arm/mach-s3c/devs.c
@@ -21,17 +21,10 @@
 #include <linux/dma-mapping.h>
 #include <linux/fb.h>
 #include <linux/gfp.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/onenand.h>
-#include <linux/mtd/partitions.h>
 #include <linux/mmc/host.h>
 #include <linux/ioport.h>
 #include <linux/sizes.h>
-#include <linux/platform_data/s3c-hsudc.h>
 #include <linux/platform_data/s3c-hsotg.h>
-#include <linux/platform_data/dma-s3c24xx.h>
-
-#include <linux/platform_data/media/s5p_hdmi.h>
 
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -43,104 +36,19 @@
 #include "gpio-samsung.h"
 #include "gpio-cfg.h"
 
-#ifdef CONFIG_PLAT_S3C24XX
-#include "regs-s3c2443-clock.h"
-#endif /* CONFIG_PLAT_S3C24XX */
-
 #include "cpu.h"
 #include "devs.h"
-#include <linux/soc/samsung/s3c-adc.h>
-#include <linux/platform_data/ata-samsung_cf.h>
 #include "fb.h"
-#include <linux/platform_data/fb-s3c2410.h>
-#include <linux/platform_data/hwmon-s3c.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 #include "keypad.h"
-#include <linux/platform_data/mmc-s3cmci.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
 #include "pwm-core.h"
 #include "sdhci.h"
-#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <linux/platform_data/usb-ohci-s3c2410.h>
 #include "usb-phy.h"
 #include <linux/platform_data/asoc-s3c.h>
 #include <linux/platform_data/spi-s3c64xx.h>
 
 #define samsung_device_dma_mask (*((u64[]) { DMA_BIT_MASK(32) }))
 
-/* AC97 */
-#ifdef CONFIG_CPU_S3C2440
-static struct resource s3c_ac97_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2440_PA_AC97, S3C2440_SZ_AC97),
-	[1] = DEFINE_RES_IRQ(IRQ_S3C244X_AC97),
-};
-
-struct platform_device s3c_device_ac97 = {
-	.name		= "samsung-ac97",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_ac97_resource),
-	.resource	= s3c_ac97_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-#endif /* CONFIG_CPU_S3C2440 */
-
-/* ADC */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_adc_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_ADC, S3C24XX_SZ_ADC),
-	[1] = DEFINE_RES_IRQ(IRQ_TC),
-	[2] = DEFINE_RES_IRQ(IRQ_ADC),
-};
-
-struct platform_device s3c_device_adc = {
-	.name		= "s3c24xx-adc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_adc_resource),
-	.resource	= s3c_adc_resource,
-};
-#endif /* CONFIG_PLAT_S3C24XX */
-
-#if defined(CONFIG_SAMSUNG_DEV_ADC)
-static struct resource s3c_adc_resource[] = {
-	[0] = DEFINE_RES_MEM(SAMSUNG_PA_ADC, SZ_256),
-	[1] = DEFINE_RES_IRQ(IRQ_ADC),
-	[2] = DEFINE_RES_IRQ(IRQ_TC),
-};
-
-struct platform_device s3c_device_adc = {
-	.name		= "exynos-adc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_adc_resource),
-	.resource	= s3c_adc_resource,
-};
-#endif /* CONFIG_SAMSUNG_DEV_ADC */
-
-/* Camif Controller */
-
-#ifdef CONFIG_CPU_S3C2440
-static struct resource s3c_camif_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2440_PA_CAMIF, S3C2440_SZ_CAMIF),
-	[1] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_C),
-	[2] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_P),
-};
-
-struct platform_device s3c_device_camif = {
-	.name		= "s3c2440-camif",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_camif_resource),
-	.resource	= s3c_camif_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-#endif /* CONFIG_CPU_S3C2440 */
-
 /* FB */
 
 #ifdef CONFIG_S3C_DEV_FB
@@ -169,22 +77,6 @@ void __init s3c_fb_set_platdata(struct s3c_fb_platdata *pd)
 }
 #endif /* CONFIG_S3C_DEV_FB */
 
-/* HWMON */
-
-#ifdef CONFIG_S3C_DEV_HWMON
-struct platform_device s3c_device_hwmon = {
-	.name		= "s3c-hwmon",
-	.id		= -1,
-	.dev.parent	= &s3c_device_adc.dev,
-};
-
-void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd)
-{
-	s3c_set_platdata(pd, sizeof(struct s3c_hwmon_pdata),
-			 &s3c_device_hwmon);
-}
-#endif /* CONFIG_S3C_DEV_HWMON */
-
 /* HSMMC */
 
 #ifdef CONFIG_S3C_DEV_HSMMC
@@ -374,220 +266,6 @@ void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd)
 }
 #endif /* CONFIG_S3C_DEV_I2C1 */
 
-#ifdef CONFIG_S3C_DEV_I2C2
-static struct resource s3c_i2c2_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_IIC2, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_IIC2),
-};
-
-struct platform_device s3c_device_i2c2 = {
-	.name		= "s3c2410-i2c",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(s3c_i2c2_resource),
-	.resource	= s3c_i2c2_resource,
-};
-
-void __init s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 2;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c2);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c2_cfg_gpio;
-}
-#endif /* CONFIG_S3C_DEV_I2C2 */
-
-#ifdef CONFIG_S3C_DEV_I2C3
-static struct resource s3c_i2c3_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_IIC3, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_IIC3),
-};
-
-struct platform_device s3c_device_i2c3 = {
-	.name		= "s3c2440-i2c",
-	.id		= 3,
-	.num_resources	= ARRAY_SIZE(s3c_i2c3_resource),
-	.resource	= s3c_i2c3_resource,
-};
-
-void __init s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 3;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c3);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c3_cfg_gpio;
-}
-#endif /*CONFIG_S3C_DEV_I2C3 */
-
-#ifdef CONFIG_S3C_DEV_I2C4
-static struct resource s3c_i2c4_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_IIC4, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_IIC4),
-};
-
-struct platform_device s3c_device_i2c4 = {
-	.name		= "s3c2440-i2c",
-	.id		= 4,
-	.num_resources	= ARRAY_SIZE(s3c_i2c4_resource),
-	.resource	= s3c_i2c4_resource,
-};
-
-void __init s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 4;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c4);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c4_cfg_gpio;
-}
-#endif /*CONFIG_S3C_DEV_I2C4 */
-
-#ifdef CONFIG_S3C_DEV_I2C5
-static struct resource s3c_i2c5_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_IIC5, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_IIC5),
-};
-
-struct platform_device s3c_device_i2c5 = {
-	.name		= "s3c2440-i2c",
-	.id		= 5,
-	.num_resources	= ARRAY_SIZE(s3c_i2c5_resource),
-	.resource	= s3c_i2c5_resource,
-};
-
-void __init s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 5;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c5);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c5_cfg_gpio;
-}
-#endif /*CONFIG_S3C_DEV_I2C5 */
-
-#ifdef CONFIG_S3C_DEV_I2C6
-static struct resource s3c_i2c6_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_IIC6, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_IIC6),
-};
-
-struct platform_device s3c_device_i2c6 = {
-	.name		= "s3c2440-i2c",
-	.id		= 6,
-	.num_resources	= ARRAY_SIZE(s3c_i2c6_resource),
-	.resource	= s3c_i2c6_resource,
-};
-
-void __init s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 6;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c6);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c6_cfg_gpio;
-}
-#endif /* CONFIG_S3C_DEV_I2C6 */
-
-#ifdef CONFIG_S3C_DEV_I2C7
-static struct resource s3c_i2c7_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_IIC7, SZ_4K),
-	[1] = DEFINE_RES_IRQ(IRQ_IIC7),
-};
-
-struct platform_device s3c_device_i2c7 = {
-	.name		= "s3c2440-i2c",
-	.id		= 7,
-	.num_resources	= ARRAY_SIZE(s3c_i2c7_resource),
-	.resource	= s3c_i2c7_resource,
-};
-
-void __init s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *pd)
-{
-	struct s3c2410_platform_i2c *npd;
-
-	if (!pd) {
-		pd = &default_i2c_data;
-		pd->bus_num = 7;
-	}
-
-	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_i2c7);
-
-	if (!npd->cfg_gpio)
-		npd->cfg_gpio = s3c_i2c7_cfg_gpio;
-}
-#endif /* CONFIG_S3C_DEV_I2C7 */
-
-/* I2S */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_iis_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_IIS, S3C24XX_SZ_IIS),
-};
-
-struct platform_device s3c_device_iis = {
-	.name		= "s3c24xx-iis",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_iis_resource),
-	.resource	= s3c_iis_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-#endif /* CONFIG_PLAT_S3C24XX */
-
-/* IDE CFCON */
-
-#ifdef CONFIG_SAMSUNG_DEV_IDE
-static struct resource s3c_cfcon_resource[] = {
-	[0] = DEFINE_RES_MEM(SAMSUNG_PA_CFCON, SZ_16K),
-	[1] = DEFINE_RES_IRQ(IRQ_CFCON),
-};
-
-struct platform_device s3c_device_cfcon = {
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s3c_cfcon_resource),
-	.resource	= s3c_cfcon_resource,
-};
-
-void __init s3c_ide_set_platdata(struct s3c_ide_platdata *pdata)
-{
-	s3c_set_platdata(pdata, sizeof(struct s3c_ide_platdata),
-			 &s3c_device_cfcon);
-}
-#endif /* CONFIG_SAMSUNG_DEV_IDE */
-
 /* KEYPAD */
 
 #ifdef CONFIG_SAMSUNG_DEV_KEYPAD
@@ -614,175 +292,6 @@ void __init samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd)
 }
 #endif /* CONFIG_SAMSUNG_DEV_KEYPAD */
 
-/* LCD Controller */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_lcd_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_LCD, S3C24XX_SZ_LCD),
-	[1] = DEFINE_RES_IRQ(IRQ_LCD),
-};
-
-struct platform_device s3c_device_lcd = {
-	.name		= "s3c2410-lcd",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_lcd_resource),
-	.resource	= s3c_lcd_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-
-void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
-{
-	struct s3c2410fb_mach_info *npd;
-
-	npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_lcd);
-	if (npd) {
-		npd->displays = kmemdup(pd->displays,
-			sizeof(struct s3c2410fb_display) * npd->num_displays,
-			GFP_KERNEL);
-		if (!npd->displays)
-			printk(KERN_ERR "no memory for LCD display data\n");
-	} else {
-		printk(KERN_ERR "no memory for LCD platform data\n");
-	}
-}
-#endif /* CONFIG_PLAT_S3C24XX */
-
-/* NAND */
-
-#ifdef CONFIG_S3C_DEV_NAND
-static struct resource s3c_nand_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_NAND, SZ_1M),
-};
-
-struct platform_device s3c_device_nand = {
-	.name		= "s3c2410-nand",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_nand_resource),
-	.resource	= s3c_nand_resource,
-};
-
-/*
- * s3c_nand_copy_set() - copy nand set data
- * @set: The new structure, directly copied from the old.
- *
- * Copy all the fields from the NAND set field from what is probably __initdata
- * to new kernel memory. The code returns 0 if the copy happened correctly or
- * an error code for the calling function to display.
- *
- * Note, we currently do not try and look to see if we've already copied the
- * data in a previous set.
- */
-static int __init s3c_nand_copy_set(struct s3c2410_nand_set *set)
-{
-	void *ptr;
-	int size;
-
-	size = sizeof(struct mtd_partition) * set->nr_partitions;
-	if (size) {
-		ptr = kmemdup(set->partitions, size, GFP_KERNEL);
-		set->partitions = ptr;
-
-		if (!ptr)
-			return -ENOMEM;
-	}
-
-	if (set->nr_map && set->nr_chips) {
-		size = sizeof(int) * set->nr_chips;
-		ptr = kmemdup(set->nr_map, size, GFP_KERNEL);
-		set->nr_map = ptr;
-
-		if (!ptr)
-			return -ENOMEM;
-	}
-
-	return 0;
-}
-
-void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand)
-{
-	struct s3c2410_platform_nand *npd;
-	int size;
-	int ret;
-
-	/* note, if we get a failure in allocation, we simply drop out of the
-	 * function. If there is so little memory available at initialisation
-	 * time then there is little chance the system is going to run.
-	 */
-
-	npd = s3c_set_platdata(nand, sizeof(*npd), &s3c_device_nand);
-	if (!npd)
-		return;
-
-	/* now see if we need to copy any of the nand set data */
-
-	size = sizeof(struct s3c2410_nand_set) * npd->nr_sets;
-	if (size) {
-		struct s3c2410_nand_set *from = npd->sets;
-		struct s3c2410_nand_set *to;
-		int i;
-
-		to = kmemdup(from, size, GFP_KERNEL);
-		npd->sets = to;	/* set, even if we failed */
-
-		if (!to) {
-			printk(KERN_ERR "%s: no memory for sets\n", __func__);
-			return;
-		}
-
-		for (i = 0; i < npd->nr_sets; i++) {
-			ret = s3c_nand_copy_set(to);
-			if (ret) {
-				printk(KERN_ERR "%s: failed to copy set %d\n",
-				__func__, i);
-				return;
-			}
-			to++;
-		}
-	}
-}
-#endif /* CONFIG_S3C_DEV_NAND */
-
-/* ONENAND */
-
-#ifdef CONFIG_S3C_DEV_ONENAND
-static struct resource s3c_onenand_resources[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_ONENAND, SZ_1K),
-	[1] = DEFINE_RES_MEM(S3C_PA_ONENAND_BUF, S3C_SZ_ONENAND_BUF),
-	[2] = DEFINE_RES_IRQ(IRQ_ONENAND),
-};
-
-struct platform_device s3c_device_onenand = {
-	.name		= "samsung-onenand",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s3c_onenand_resources),
-	.resource	= s3c_onenand_resources,
-};
-#endif /* CONFIG_S3C_DEV_ONENAND */
-
-#ifdef CONFIG_S3C64XX_DEV_ONENAND1
-static struct resource s3c64xx_onenand1_resources[] = {
-	[0] = DEFINE_RES_MEM(S3C64XX_PA_ONENAND1, SZ_1K),
-	[1] = DEFINE_RES_MEM(S3C64XX_PA_ONENAND1_BUF, S3C64XX_SZ_ONENAND1_BUF),
-	[2] = DEFINE_RES_IRQ(IRQ_ONENAND1),
-};
-
-struct platform_device s3c64xx_device_onenand1 = {
-	.name		= "samsung-onenand",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s3c64xx_onenand1_resources),
-	.resource	= s3c64xx_onenand1_resources,
-};
-
-void __init s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata)
-{
-	s3c_set_platdata(pdata, sizeof(struct onenand_platform_data),
-			 &s3c64xx_device_onenand1);
-}
-#endif /* CONFIG_S3C64XX_DEV_ONENAND1 */
-
 /* PWM Timer */
 
 #ifdef CONFIG_SAMSUNG_DEV_PWM
@@ -803,162 +312,6 @@ void __init samsung_pwm_set_platdata(struct samsung_pwm_variant *pd)
 }
 #endif /* CONFIG_SAMSUNG_DEV_PWM */
 
-/* RTC */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_rtc_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_RTC, SZ_256),
-	[1] = DEFINE_RES_IRQ(IRQ_RTC),
-	[2] = DEFINE_RES_IRQ(IRQ_TICK),
-};
-
-struct platform_device s3c_device_rtc = {
-	.name		= "s3c2410-rtc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_rtc_resource),
-	.resource	= s3c_rtc_resource,
-};
-#endif /* CONFIG_PLAT_S3C24XX */
-
-#ifdef CONFIG_S3C_DEV_RTC
-static struct resource s3c_rtc_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_RTC, SZ_256),
-	[1] = DEFINE_RES_IRQ(IRQ_RTC_ALARM),
-	[2] = DEFINE_RES_IRQ(IRQ_RTC_TIC),
-};
-
-struct platform_device s3c_device_rtc = {
-	.name		= "s3c64xx-rtc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_rtc_resource),
-	.resource	= s3c_rtc_resource,
-};
-#endif /* CONFIG_S3C_DEV_RTC */
-
-/* SDI */
-
-#ifdef CONFIG_PLAT_S3C24XX
-void s3c24xx_mci_def_set_power(unsigned char power_mode, unsigned short vdd)
-{
-	switch (power_mode) {
-	case MMC_POWER_ON:
-	case MMC_POWER_UP:
-		/* Configure GPE5...GPE10 pins in SD mode */
-		s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2),
-				      S3C_GPIO_PULL_NONE);
-		break;
-
-	case MMC_POWER_OFF:
-	default:
-		gpio_direction_output(S3C2410_GPE(5), 0);
-		break;
-	}
-}
-
-static struct resource s3c_sdi_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_SDI, S3C24XX_SZ_SDI),
-	[1] = DEFINE_RES_IRQ(IRQ_SDI),
-};
-
-static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
-	/* This is currently here to avoid a number of if (host->pdata)
-	 * checks. Any zero fields to ensure reasonable defaults are picked. */
-	.no_wprotect = 1,
-	.no_detect = 1,
-	.set_power = s3c24xx_mci_def_set_power,
-};
-
-struct platform_device s3c_device_sdi = {
-	.name		= "s3c2410-sdi",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_sdi_resource),
-	.resource	= s3c_sdi_resource,
-	.dev.platform_data = &s3cmci_def_pdata,
-};
-
-void __init s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata)
-{
-	s3c_set_platdata(pdata, sizeof(struct s3c24xx_mci_pdata),
-			 &s3c_device_sdi);
-}
-#endif /* CONFIG_PLAT_S3C24XX */
-
-/* SPI */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_spi0_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_SPI, SZ_32),
-	[1] = DEFINE_RES_IRQ(IRQ_SPI0),
-};
-
-struct platform_device s3c_device_spi0 = {
-	.name		= "s3c2410-spi",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s3c_spi0_resource),
-	.resource	= s3c_spi0_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-
-static struct resource s3c_spi1_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_SPI1, SZ_32),
-	[1] = DEFINE_RES_IRQ(IRQ_SPI1),
-};
-
-struct platform_device s3c_device_spi1 = {
-	.name		= "s3c2410-spi",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s3c_spi1_resource),
-	.resource	= s3c_spi1_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	}
-};
-#endif /* CONFIG_PLAT_S3C24XX */
-
-/* Touchscreen */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_ts_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_ADC, S3C24XX_SZ_ADC),
-	[1] = DEFINE_RES_IRQ(IRQ_TC),
-};
-
-struct platform_device s3c_device_ts = {
-	.name		= "s3c2410-ts",
-	.id		= -1,
-	.dev.parent	= &s3c_device_adc.dev,
-	.num_resources	= ARRAY_SIZE(s3c_ts_resource),
-	.resource	= s3c_ts_resource,
-};
-
-void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_info)
-{
-	s3c_set_platdata(hard_s3c2410ts_info,
-			 sizeof(struct s3c2410_ts_mach_info), &s3c_device_ts);
-}
-#endif /* CONFIG_PLAT_S3C24XX */
-
-#ifdef CONFIG_SAMSUNG_DEV_TS
-static struct s3c2410_ts_mach_info default_ts_data __initdata = {
-	.delay			= 10000,
-	.presc			= 49,
-	.oversampling_shift	= 2,
-};
-
-void __init s3c64xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
-{
-	if (!pd)
-		pd = &default_ts_data;
-
-	s3c_set_platdata(pd, sizeof(struct s3c2410_ts_mach_info),
-			 &s3c_device_adc);
-}
-#endif /* CONFIG_SAMSUNG_DEV_TS */
-
 /* USB */
 
 #ifdef CONFIG_S3C_DEV_USB_HOST
@@ -977,44 +330,8 @@ struct platform_device s3c_device_ohci = {
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
 	}
 };
-
-/*
- * s3c_ohci_set_platdata - initialise OHCI device platform data
- * @info: The platform data.
- *
- * This call copies the @info passed in and sets the device .platform_data
- * field to that copy. The @info is copied so that the original can be marked
- * __initdata.
- */
-
-void __init s3c_ohci_set_platdata(struct s3c2410_hcd_info *info)
-{
-	s3c_set_platdata(info, sizeof(struct s3c2410_hcd_info),
-			 &s3c_device_ohci);
-}
 #endif /* CONFIG_S3C_DEV_USB_HOST */
 
-/* USB Device (Gadget) */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_usbgadget_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_USBDEV, S3C24XX_SZ_USBDEV),
-	[1] = DEFINE_RES_IRQ(IRQ_USBD),
-};
-
-struct platform_device s3c_device_usbgadget = {
-	.name		= "s3c2410-usbgadget",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_usbgadget_resource),
-	.resource	= s3c_usbgadget_resource,
-};
-
-void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *pd)
-{
-	s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usbgadget);
-}
-#endif /* CONFIG_PLAT_S3C24XX */
-
 /* USB HSOTG */
 
 #ifdef CONFIG_S3C_DEV_USB_HSOTG
@@ -1047,49 +364,6 @@ void __init dwc2_hsotg_set_platdata(struct dwc2_hsotg_plat *pd)
 }
 #endif /* CONFIG_S3C_DEV_USB_HSOTG */
 
-/* USB High Spped 2.0 Device (Gadget) */
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct resource s3c_hsudc_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2416_PA_HSUDC, S3C2416_SZ_HSUDC),
-	[1] = DEFINE_RES_IRQ(IRQ_USBD),
-};
-
-struct platform_device s3c_device_usb_hsudc = {
-	.name		= "s3c-hsudc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_hsudc_resource),
-	.resource	= s3c_hsudc_resource,
-	.dev		= {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd)
-{
-	s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usb_hsudc);
-	pd->phy_init = s3c_hsudc_init_phy;
-	pd->phy_uninit = s3c_hsudc_uninit_phy;
-}
-#endif /* CONFIG_PLAT_S3C24XX */
-
-/* WDT */
-
-#ifdef CONFIG_S3C_DEV_WDT
-static struct resource s3c_wdt_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_WDT, SZ_1K),
-	[1] = DEFINE_RES_IRQ(IRQ_WDT),
-};
-
-struct platform_device s3c_device_wdt = {
-	.name		= "s3c2410-wdt",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_wdt_resource),
-	.resource	= s3c_wdt_resource,
-};
-#endif /* CONFIG_S3C_DEV_WDT */
-
 #ifdef CONFIG_S3C64XX_DEV_SPI0
 static struct resource s3c64xx_spi0_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C_PA_SPI0, SZ_256),
diff --git a/arch/arm/mach-s3c/devs.h b/arch/arm/mach-s3c/devs.h
index 991b9b2006a1..21c00786c264 100644
--- a/arch/arm/mach-s3c/devs.h
+++ b/arch/arm/mach-s3c/devs.h
@@ -25,60 +25,23 @@ extern struct s3c24xx_uart_resources s3c64xx_uart_resources[];
 extern struct platform_device *s3c24xx_uart_devs[];
 extern struct platform_device *s3c24xx_uart_src[];
 
-extern struct platform_device s3c64xx_device_ac97;
 extern struct platform_device s3c64xx_device_iis0;
 extern struct platform_device s3c64xx_device_iis1;
-extern struct platform_device s3c64xx_device_iisv4;
-extern struct platform_device s3c64xx_device_onenand1;
-extern struct platform_device s3c64xx_device_pcm0;
-extern struct platform_device s3c64xx_device_pcm1;
 extern struct platform_device s3c64xx_device_spi0;
 
-extern struct platform_device s3c_device_adc;
-extern struct platform_device s3c_device_cfcon;
 extern struct platform_device s3c_device_fb;
-extern struct platform_device s3c_device_hwmon;
 extern struct platform_device s3c_device_hsmmc0;
 extern struct platform_device s3c_device_hsmmc1;
 extern struct platform_device s3c_device_hsmmc2;
 extern struct platform_device s3c_device_hsmmc3;
 extern struct platform_device s3c_device_i2c0;
 extern struct platform_device s3c_device_i2c1;
-extern struct platform_device s3c_device_i2c2;
-extern struct platform_device s3c_device_i2c3;
-extern struct platform_device s3c_device_i2c4;
-extern struct platform_device s3c_device_i2c5;
-extern struct platform_device s3c_device_i2c6;
-extern struct platform_device s3c_device_i2c7;
-extern struct platform_device s3c_device_iis;
-extern struct platform_device s3c_device_lcd;
-extern struct platform_device s3c_device_nand;
 extern struct platform_device s3c_device_ohci;
-extern struct platform_device s3c_device_onenand;
-extern struct platform_device s3c_device_rtc;
-extern struct platform_device s3c_device_sdi;
-extern struct platform_device s3c_device_spi0;
-extern struct platform_device s3c_device_spi1;
-extern struct platform_device s3c_device_ts;
-extern struct platform_device s3c_device_timer[];
-extern struct platform_device s3c_device_usbgadget;
 extern struct platform_device s3c_device_usb_hsotg;
-extern struct platform_device s3c_device_usb_hsudc;
-extern struct platform_device s3c_device_wdt;
 
-extern struct platform_device samsung_asoc_idma;
 extern struct platform_device samsung_device_keypad;
 extern struct platform_device samsung_device_pwm;
 
-/* s3c2440 specific devices */
-
-#ifdef CONFIG_CPU_S3C2440
-
-extern struct platform_device s3c_device_camif;
-extern struct platform_device s3c_device_ac97;
-
-#endif
-
 /**
  * s3c_set_platdata() - helper for setting platform data
  * @pd: The default platform data for this device.
diff --git a/arch/arm/mach-s3c/dma-s3c24xx.h b/arch/arm/mach-s3c/dma-s3c24xx.h
deleted file mode 100644
index 25fc9c258fc1..000000000000
--- a/arch/arm/mach-s3c/dma-s3c24xx.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2003-2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C24XX DMA support
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H __FILE__
-
-#include <linux/device.h>
-
-/* We use `virtual` dma channels to hide the fact we have only a limited
- * number of DMA channels, and not of all of them (dependent on the device)
- * can be attached to any DMA source. We therefore let the DMA core handle
- * the allocation of hardware channels to clients.
-*/
-
-enum dma_ch {
-	DMACH_XD0 = 0,
-	DMACH_XD1,
-	DMACH_SDI,
-	DMACH_SPI0,
-	DMACH_SPI1,
-	DMACH_UART0,
-	DMACH_UART1,
-	DMACH_UART2,
-	DMACH_TIMER,
-	DMACH_I2S_IN,
-	DMACH_I2S_OUT,
-	DMACH_PCM_IN,
-	DMACH_PCM_OUT,
-	DMACH_MIC_IN,
-	DMACH_USB_EP1,
-	DMACH_USB_EP2,
-	DMACH_USB_EP3,
-	DMACH_USB_EP4,
-	DMACH_UART0_SRC2,	/* s3c2412 second uart sources */
-	DMACH_UART1_SRC2,
-	DMACH_UART2_SRC2,
-	DMACH_UART3,		/* s3c2443 has extra uart */
-	DMACH_UART3_SRC2,
-	DMACH_SPI0_TX,		/* s3c2443/2416/2450 hsspi0 */
-	DMACH_SPI0_RX,		/* s3c2443/2416/2450 hsspi0 */
-	DMACH_SPI1_TX,		/* s3c2443/2450 hsspi1 */
-	DMACH_SPI1_RX,		/* s3c2443/2450 hsspi1 */
-	DMACH_MAX,		/* the end entry */
-};
-
-#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-s3c/dma-s3c64xx.h b/arch/arm/mach-s3c/dma-s3c64xx.h
deleted file mode 100644
index 40ca8de21096..000000000000
--- a/arch/arm/mach-s3c/dma-s3c64xx.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* linux/arch/arm/mach-s3c6400/include/mach/dma.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C6400 - DMA support
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H __FILE__
-
-#define S3C64XX_DMA_CHAN(name)		((unsigned long)(name))
-
-/* DMA0/SDMA0 */
-#define DMACH_UART0		"uart0_tx"
-#define DMACH_UART0_SRC2	"uart0_rx"
-#define DMACH_UART1		"uart1_tx"
-#define DMACH_UART1_SRC2	"uart1_rx"
-#define DMACH_UART2		"uart2_tx"
-#define DMACH_UART2_SRC2	"uart2_rx"
-#define DMACH_UART3		"uart3_tx"
-#define DMACH_UART3_SRC2	"uart3_rx"
-#define DMACH_PCM0_TX		"pcm0_tx"
-#define DMACH_PCM0_RX		"pcm0_rx"
-#define DMACH_I2S0_OUT		"i2s0_tx"
-#define DMACH_I2S0_IN		"i2s0_rx"
-#define DMACH_SPI0_TX		S3C64XX_DMA_CHAN("spi0_tx")
-#define DMACH_SPI0_RX		S3C64XX_DMA_CHAN("spi0_rx")
-#define DMACH_HSI_I2SV40_TX	"i2s2_tx"
-#define DMACH_HSI_I2SV40_RX	"i2s2_rx"
-
-/* DMA1/SDMA1 */
-#define DMACH_PCM1_TX		"pcm1_tx"
-#define DMACH_PCM1_RX		"pcm1_rx"
-#define DMACH_I2S1_OUT		"i2s1_tx"
-#define DMACH_I2S1_IN		"i2s1_rx"
-#define DMACH_SPI1_TX		S3C64XX_DMA_CHAN("spi1_tx")
-#define DMACH_SPI1_RX		S3C64XX_DMA_CHAN("spi1_rx")
-#define DMACH_AC97_PCMOUT	"ac97_out"
-#define DMACH_AC97_PCMIN	"ac97_in"
-#define DMACH_AC97_MICIN	"ac97_mic"
-#define DMACH_PWM		"pwm"
-#define DMACH_IRDA		"irda"
-#define DMACH_EXTERNAL		"external"
-#define DMACH_SECURITY_RX	"sec_rx"
-#define DMACH_SECURITY_TX	"sec_tx"
-
-enum dma_ch {
-	DMACH_MAX = 32
-};
-
-#include <linux/amba/pl08x.h>
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c/dma.h b/arch/arm/mach-s3c/dma.h
deleted file mode 100644
index 59a4578c5f00..000000000000
--- a/arch/arm/mach-s3c/dma.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-
-#ifdef CONFIG_ARCH_S3C24XX
-#include "dma-s3c24xx.h"
-#endif
-
-#ifdef CONFIG_ARCH_S3C64XX
-#include "dma-s3c64xx.h"
-#endif
diff --git a/arch/arm/mach-s3c/fb-core-s3c24xx.h b/arch/arm/mach-s3c/fb-core-s3c24xx.h
deleted file mode 100644
index 0e07f3ba4aef..000000000000
--- a/arch/arm/mach-s3c/fb-core-s3c24xx.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2010 Samsung Electronics Co., Ltd.
- *	Pawel Osciak <p.osciak@samsung.com>
- *
- * Samsung framebuffer driver core functions
- */
-#ifndef __ASM_PLAT_FB_CORE_S3C24XX_H
-#define __ASM_PLAT_FB_CORE_S3C24XX_H __FILE__
-
-/*
- * These functions are only for use with the core support code, such as
- * the CPU-specific initialization code.
- */
-
-/* Re-define device name depending on support. */
-static inline void s3c_fb_setname(char *name)
-{
-#ifdef CONFIG_S3C_DEV_FB
-	s3c_device_fb.name = name;
-#endif
-}
-
-#endif /* __ASM_PLAT_FB_CORE_S3C24XX_H */
diff --git a/arch/arm/mach-s3c/gpio-cfg-helpers.h b/arch/arm/mach-s3c/gpio-cfg-helpers.h
index db0c56f5ca15..9d6f6319ae3e 100644
--- a/arch/arm/mach-s3c/gpio-cfg-helpers.h
+++ b/arch/arm/mach-s3c/gpio-cfg-helpers.h
@@ -26,134 +26,10 @@ static inline int samsung_gpio_do_setcfg(struct samsung_gpio_chip *chip,
 	return (chip->config->set_config)(chip, off, config);
 }
 
-static inline unsigned samsung_gpio_do_getcfg(struct samsung_gpio_chip *chip,
-					      unsigned int off)
-{
-	return (chip->config->get_config)(chip, off);
-}
-
 static inline int samsung_gpio_do_setpull(struct samsung_gpio_chip *chip,
 					  unsigned int off, samsung_gpio_pull_t pull)
 {
 	return (chip->config->set_pull)(chip, off, pull);
 }
 
-static inline samsung_gpio_pull_t samsung_gpio_do_getpull(struct samsung_gpio_chip *chip,
-							  unsigned int off)
-{
-	return chip->config->get_pull(chip, off);
-}
-
-/* Pull-{up,down} resistor controls.
- *
- * S3C2410,S3C2440 = Pull-UP,
- * S3C2412,S3C2413 = Pull-Down
- * S3C6400,S3C6410 = Pull-Both [None,Down,Up,Undef]
- * S3C2443 = Pull-Both [not same as S3C6400]
- */
-
-/**
- * s3c24xx_gpio_setpull_1up() - Pull configuration for choice of up or none.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @param: pull: The pull mode being requested.
- *
- * This is a helper function for the case where we have GPIOs with one
- * bit configuring the presence of a pull-up resistor.
- */
-extern int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip,
-				    unsigned int off, samsung_gpio_pull_t pull);
-
-/**
- * s3c24xx_gpio_setpull_1down() - Pull configuration for choice of down or none
- * @chip: The gpio chip that is being configured
- * @off: The offset for the GPIO being configured
- * @param: pull: The pull mode being requested
- *
- * This is a helper function for the case where we have GPIOs with one
- * bit configuring the presence of a pull-down resistor.
- */
-extern int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip,
-				      unsigned int off, samsung_gpio_pull_t pull);
-
-/**
- * samsung_gpio_setpull_upown() - Pull configuration for choice of up,
- * down or none
- *
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @param: pull: The pull mode being requested.
- *
- * This is a helper function for the case where we have GPIOs with two
- * bits configuring the presence of a pull resistor, in the following
- * order:
- *	00 = No pull resistor connected
- *	01 = Pull-up resistor connected
- *	10 = Pull-down resistor connected
- */
-extern int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
-				       unsigned int off, samsung_gpio_pull_t pull);
-
-/**
- * samsung_gpio_getpull_updown() - Get configuration for choice of up,
- * down or none
- *
- * @chip: The gpio chip that the GPIO pin belongs to
- * @off: The offset to the pin to get the configuration of.
- *
- * This helper function reads the state of the pull-{up,down} resistor
- * for the given GPIO in the same case as samsung_gpio_setpull_upown.
-*/
-extern samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
-						       unsigned int off);
-
-/**
- * s3c24xx_gpio_getpull_1up() - Get configuration for choice of up or none
- * @chip: The gpio chip that the GPIO pin belongs to
- * @off: The offset to the pin to get the configuration of.
- *
- * This helper function reads the state of the pull-up resistor for the
- * given GPIO in the same case as s3c24xx_gpio_setpull_1up.
-*/
-extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip,
-						    unsigned int off);
-
-/**
- * s3c24xx_gpio_getpull_1down() - Get configuration for choice of down or none
- * @chip: The gpio chip that the GPIO pin belongs to
- * @off: The offset to the pin to get the configuration of.
- *
- * This helper function reads the state of the pull-down resistor for the
- * given GPIO in the same case as s3c24xx_gpio_setpull_1down.
-*/
-extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip,
-						      unsigned int off);
-
-/**
- * s3c2443_gpio_setpull() - Pull configuration for s3c2443.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @param: pull: The pull mode being requested.
- *
- * This is a helper function for the case where we have GPIOs with two
- * bits configuring the presence of a pull resistor, in the following
- * order:
- *	00 = Pull-up resistor connected
- *	10 = Pull-down resistor connected
- *	x1 = No pull up resistor
- */
-extern int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip,
-				unsigned int off, samsung_gpio_pull_t pull);
-
-/**
- * s3c2443_gpio_getpull() - Get configuration for s3c2443 pull resistors
- * @chip: The gpio chip that the GPIO pin belongs to.
- * @off: The offset to the pin to get the configuration of.
- *
- * This helper function reads the state of the pull-{up,down} resistor for the
- * given GPIO in the same case as samsung_gpio_setpull_upown.
-*/
-extern samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip,
-						unsigned int off);
-
 #endif /* __PLAT_GPIO_CFG_HELPERS_H */
diff --git a/arch/arm/mach-s3c/gpio-cfg.h b/arch/arm/mach-s3c/gpio-cfg.h
index 469c220e092b..2dfb0561001e 100644
--- a/arch/arm/mach-s3c/gpio-cfg.h
+++ b/arch/arm/mach-s3c/gpio-cfg.h
@@ -95,17 +95,6 @@ struct samsung_gpio_cfg {
 extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to);
 
 /**
- * s3c_gpio_getcfg - Read the current function for a GPIO pin
- * @pin: The pin to read the configuration value for.
- *
- * Read the configuration state of the given @pin, returning a value that
- * could be passed back to s3c_gpio_cfgpin().
- *
- * @sa s3c_gpio_cfgpin
- */
-extern unsigned s3c_gpio_getcfg(unsigned int pin);
-
-/**
  * s3c_gpio_cfgpin_range() - Change the GPIO function for configuring pin range
  * @start: The pin number to start at
  * @nr: The number of pins to configure from @start.
@@ -142,14 +131,6 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
 */
 extern int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull);
 
-/**
- * s3c_gpio_getpull() - get the pull resistor state of a gpio pin
- * @pin: The pin number to get the settings for
- *
- * Read the pull resistor value for the specified pin.
-*/
-extern samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
-
 /* configure `all` aspects of an gpio */
 
 /**
diff --git a/arch/arm/mach-s3c/gpio-core.h b/arch/arm/mach-s3c/gpio-core.h
index b361c8c0d669..6801c85fb9da 100644
--- a/arch/arm/mach-s3c/gpio-core.h
+++ b/arch/arm/mach-s3c/gpio-core.h
@@ -93,9 +93,6 @@ static inline struct samsung_gpio_chip *to_samsung_gpio(struct gpio_chip *gpc)
  */
 extern int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset);
 
-/* exported for core SoC support to change */
-extern struct samsung_gpio_cfg s3c24xx_gpiocfg_default;
-
 #ifdef CONFIG_S3C_GPIO_TRACK
 extern struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END];
 
diff --git a/arch/arm/mach-s3c/gpio-samsung-s3c24xx.h b/arch/arm/mach-s3c/gpio-samsung-s3c24xx.h
deleted file mode 100644
index c29fdc95f883..000000000000
--- a/arch/arm/mach-s3c/gpio-samsung-s3c24xx.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - GPIO lib support
- */
-
-/* some boards require extra gpio capacity to support external
- * devices that need GPIO.
- */
-
-#ifndef GPIO_SAMSUNG_S3C24XX_H
-#define GPIO_SAMSUNG_S3C24XX_H
-
-#include "map.h"
-
-/*
- * GPIO sizes for various SoCs:
- *
- *   2410 2412 2440 2443 2416
- *             2442
- *   ---- ---- ---- ---- ----
- * A  23   22   25   16   27
- * B  11   11   11   11   11
- * C  16   16   16   16   16
- * D  16   16   16   16   16
- * E  16   16   16   16   16
- * F  8    8    8    8    8
- * G  16   16   16   16   8
- * H  11   11   11   15   15
- * J  --   --   13   16   --
- * K  --   --   --   --   16
- * L  --   --   --   15   14
- * M  --   --   --   2    2
- */
-
-/* GPIO bank sizes */
-
-#define S3C2410_GPIO_A_NR	(32)
-#define S3C2410_GPIO_B_NR	(32)
-#define S3C2410_GPIO_C_NR	(32)
-#define S3C2410_GPIO_D_NR	(32)
-#define S3C2410_GPIO_E_NR	(32)
-#define S3C2410_GPIO_F_NR	(32)
-#define S3C2410_GPIO_G_NR	(32)
-#define S3C2410_GPIO_H_NR	(32)
-#define S3C2410_GPIO_J_NR	(32)	/* technically 16. */
-#define S3C2410_GPIO_K_NR	(32)	/* technically 16. */
-#define S3C2410_GPIO_L_NR	(32)	/* technically 15. */
-#define S3C2410_GPIO_M_NR	(32)	/* technically 2. */
-
-#if CONFIG_S3C_GPIO_SPACE != 0
-#error CONFIG_S3C_GPIO_SPACE cannot be nonzero at the moment
-#endif
-
-#define S3C2410_GPIO_NEXT(__gpio) \
-	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 0)
-
-#ifndef __ASSEMBLY__
-
-enum s3c_gpio_number {
-	S3C2410_GPIO_A_START = 0,
-	S3C2410_GPIO_B_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_A),
-	S3C2410_GPIO_C_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_B),
-	S3C2410_GPIO_D_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_C),
-	S3C2410_GPIO_E_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_D),
-	S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E),
-	S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F),
-	S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G),
-	S3C2410_GPIO_J_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_H),
-	S3C2410_GPIO_K_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_J),
-	S3C2410_GPIO_L_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_K),
-	S3C2410_GPIO_M_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_L),
-};
-
-#endif /* __ASSEMBLY__ */
-
-/* S3C2410 GPIO number definitions. */
-
-#define S3C2410_GPA(_nr)	(S3C2410_GPIO_A_START + (_nr))
-#define S3C2410_GPB(_nr)	(S3C2410_GPIO_B_START + (_nr))
-#define S3C2410_GPC(_nr)	(S3C2410_GPIO_C_START + (_nr))
-#define S3C2410_GPD(_nr)	(S3C2410_GPIO_D_START + (_nr))
-#define S3C2410_GPE(_nr)	(S3C2410_GPIO_E_START + (_nr))
-#define S3C2410_GPF(_nr)	(S3C2410_GPIO_F_START + (_nr))
-#define S3C2410_GPG(_nr)	(S3C2410_GPIO_G_START + (_nr))
-#define S3C2410_GPH(_nr)	(S3C2410_GPIO_H_START + (_nr))
-#define S3C2410_GPJ(_nr)	(S3C2410_GPIO_J_START + (_nr))
-#define S3C2410_GPK(_nr)	(S3C2410_GPIO_K_START + (_nr))
-#define S3C2410_GPL(_nr)	(S3C2410_GPIO_L_START + (_nr))
-#define S3C2410_GPM(_nr)	(S3C2410_GPIO_M_START + (_nr))
-
-#ifdef CONFIG_CPU_S3C244X
-#define S3C_GPIO_END	(S3C2410_GPJ(0) + 32)
-#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
-#define S3C_GPIO_END	(S3C2410_GPM(0) + 32)
-#else
-#define S3C_GPIO_END	(S3C2410_GPH(0) + 32)
-#endif
-
-#endif /* GPIO_SAMSUNG_S3C24XX_H */
diff --git a/arch/arm/mach-s3c/gpio-samsung.c b/arch/arm/mach-s3c/gpio-samsung.c
index b7fc7c41309c..87daaa09e2c3 100644
--- a/arch/arm/mach-s3c/gpio-samsung.c
+++ b/arch/arm/mach-s3c/gpio-samsung.c
@@ -35,10 +35,9 @@
 #include "gpio-core.h"
 #include "gpio-cfg.h"
 #include "gpio-cfg-helpers.h"
-#include "hardware-s3c24xx.h"
 #include "pm.h"
 
-int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
+static int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
 				unsigned int off, samsung_gpio_pull_t pull)
 {
 	void __iomem *reg = chip->base + 0x08;
@@ -53,7 +52,7 @@ int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
 	return 0;
 }
 
-samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
+static samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
 						unsigned int off)
 {
 	void __iomem *reg = chip->base + 0x08;
@@ -66,113 +65,6 @@ samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
 	return (__force samsung_gpio_pull_t)pup;
 }
 
-int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip,
-			 unsigned int off, samsung_gpio_pull_t pull)
-{
-	switch (pull) {
-	case S3C_GPIO_PULL_NONE:
-		pull = 0x01;
-		break;
-	case S3C_GPIO_PULL_UP:
-		pull = 0x00;
-		break;
-	case S3C_GPIO_PULL_DOWN:
-		pull = 0x02;
-		break;
-	}
-	return samsung_gpio_setpull_updown(chip, off, pull);
-}
-
-samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip,
-					 unsigned int off)
-{
-	samsung_gpio_pull_t pull;
-
-	pull = samsung_gpio_getpull_updown(chip, off);
-
-	switch (pull) {
-	case 0x00:
-		pull = S3C_GPIO_PULL_UP;
-		break;
-	case 0x01:
-	case 0x03:
-		pull = S3C_GPIO_PULL_NONE;
-		break;
-	case 0x02:
-		pull = S3C_GPIO_PULL_DOWN;
-		break;
-	}
-
-	return pull;
-}
-
-static int s3c24xx_gpio_setpull_1(struct samsung_gpio_chip *chip,
-				  unsigned int off, samsung_gpio_pull_t pull,
-				  samsung_gpio_pull_t updown)
-{
-	void __iomem *reg = chip->base + 0x08;
-	u32 pup = __raw_readl(reg);
-
-	if (pull == updown)
-		pup &= ~(1 << off);
-	else if (pull == S3C_GPIO_PULL_NONE)
-		pup |= (1 << off);
-	else
-		return -EINVAL;
-
-	__raw_writel(pup, reg);
-	return 0;
-}
-
-static samsung_gpio_pull_t s3c24xx_gpio_getpull_1(struct samsung_gpio_chip *chip,
-						  unsigned int off,
-						  samsung_gpio_pull_t updown)
-{
-	void __iomem *reg = chip->base + 0x08;
-	u32 pup = __raw_readl(reg);
-
-	pup &= (1 << off);
-	return pup ? S3C_GPIO_PULL_NONE : updown;
-}
-
-samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip,
-					     unsigned int off)
-{
-	return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP);
-}
-
-int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip,
-			     unsigned int off, samsung_gpio_pull_t pull)
-{
-	return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP);
-}
-
-samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip,
-					       unsigned int off)
-{
-	return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN);
-}
-
-int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip,
-			       unsigned int off, samsung_gpio_pull_t pull)
-{
-	return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN);
-}
-
-/*
- * samsung_gpio_setcfg_2bit - Samsung 2bit style GPIO configuration.
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @cfg: The configuration value to set.
- *
- * This helper deal with the GPIO cases where the control register
- * has two bits of configuration per gpio, which have the following
- * functions:
- *	00 = input
- *	01 = output
- *	1x = special function
- */
-
 static int samsung_gpio_setcfg_2bit(struct samsung_gpio_chip *chip,
 				    unsigned int off, unsigned int cfg)
 {
@@ -289,70 +181,6 @@ static unsigned samsung_gpio_getcfg_4bit(struct samsung_gpio_chip *chip,
 	return S3C_GPIO_SPECIAL(con);
 }
 
-#ifdef CONFIG_PLAT_S3C24XX
-/*
- * s3c24xx_gpio_setcfg_abank - S3C24XX style GPIO configuration (Bank A)
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- * @cfg: The configuration value to set.
- *
- * This helper deal with the GPIO cases where the control register
- * has one bit of configuration for the gpio, where setting the bit
- * means the pin is in special function mode and unset means output.
- */
-
-static int s3c24xx_gpio_setcfg_abank(struct samsung_gpio_chip *chip,
-				     unsigned int off, unsigned int cfg)
-{
-	void __iomem *reg = chip->base;
-	unsigned int shift = off;
-	u32 con;
-
-	if (samsung_gpio_is_cfg_special(cfg)) {
-		cfg &= 0xf;
-
-		/* Map output to 0, and SFN2 to 1 */
-		cfg -= 1;
-		if (cfg > 1)
-			return -EINVAL;
-
-		cfg <<= shift;
-	}
-
-	con = __raw_readl(reg);
-	con &= ~(0x1 << shift);
-	con |= cfg;
-	__raw_writel(con, reg);
-
-	return 0;
-}
-
-/*
- * s3c24xx_gpio_getcfg_abank - S3C24XX style GPIO configuration read (Bank A)
- * @chip: The gpio chip that is being configured.
- * @off: The offset for the GPIO being configured.
- *
- * The reverse of s3c24xx_gpio_setcfg_abank() turning an GPIO into a usable
- * GPIO configuration value.
- *
- * @sa samsung_gpio_getcfg_2bit
- * @sa samsung_gpio_getcfg_4bit
- */
-
-static unsigned s3c24xx_gpio_getcfg_abank(struct samsung_gpio_chip *chip,
-					  unsigned int off)
-{
-	u32 con;
-
-	con = __raw_readl(chip->base);
-	con >>= off;
-	con &= 1;
-	con++;
-
-	return S3C_GPIO_SFN(con);
-}
-#endif
-
 static void __init samsung_gpiolib_set_cfg(struct samsung_gpio_cfg *chipcfg,
 					   int nr_chips)
 {
@@ -368,18 +196,6 @@ static void __init samsung_gpiolib_set_cfg(struct samsung_gpio_cfg *chipcfg,
 	}
 }
 
-struct samsung_gpio_cfg s3c24xx_gpiocfg_default = {
-	.set_config	= samsung_gpio_setcfg_2bit,
-	.get_config	= samsung_gpio_getcfg_2bit,
-};
-
-#ifdef CONFIG_PLAT_S3C24XX
-static struct samsung_gpio_cfg s3c24xx_gpiocfg_banka = {
-	.set_config	= s3c24xx_gpio_setcfg_abank,
-	.get_config	= s3c24xx_gpio_getcfg_abank,
-};
-#endif
-
 static struct samsung_gpio_cfg samsung_gpio_cfgs[] = {
 	[0] = {
 		.cfg_eint	= 0x0,
@@ -614,44 +430,6 @@ static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
 	return 0;
 }
 
-#ifdef CONFIG_PLAT_S3C24XX
-/* The next set of routines are for the case of s3c24xx bank a */
-
-static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
-{
-	return -EINVAL;
-}
-
-static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
-					unsigned offset, int value)
-{
-	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long flags;
-	unsigned long dat;
-	unsigned long con;
-
-	local_irq_save(flags);
-
-	con = __raw_readl(base + 0x00);
-	dat = __raw_readl(base + 0x04);
-
-	dat &= ~(1 << offset);
-	if (value)
-		dat |= 1 << offset;
-
-	__raw_writel(dat, base + 0x04);
-
-	con &= ~(1 << offset);
-
-	__raw_writel(con, base + 0x00);
-	__raw_writel(dat, base + 0x04);
-
-	local_irq_restore(flags);
-	return 0;
-}
-#endif
-
 static void samsung_gpiolib_set(struct gpio_chip *chip,
 				unsigned offset, int value)
 {
@@ -756,33 +534,6 @@ static void __init samsung_gpiolib_add(struct samsung_gpio_chip *chip)
 		s3c_gpiolib_track(chip);
 }
 
-static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip,
-					     int nr_chips, void __iomem *base)
-{
-	int i;
-	struct gpio_chip *gc = &chip->chip;
-
-	for (i = 0 ; i < nr_chips; i++, chip++) {
-		/* skip banks not present on SoC */
-		if (chip->chip.base >= S3C_GPIO_END)
-			continue;
-
-		if (!chip->config)
-			chip->config = &s3c24xx_gpiocfg_default;
-		if (!chip->pm)
-			chip->pm = __gpio_pm(&samsung_gpio_pm_2bit);
-		if ((base != NULL) && (chip->base == NULL))
-			chip->base = base + ((i) * 0x10);
-
-		if (!gc->direction_input)
-			gc->direction_input = samsung_gpiolib_2bit_input;
-		if (!gc->direction_output)
-			gc->direction_output = samsung_gpiolib_2bit_output;
-
-		samsung_gpiolib_add(chip);
-	}
-}
-
 static void __init samsung_gpiolib_add_2bit_chips(struct samsung_gpio_chip *chip,
 						  int nr_chips, void __iomem *base,
 						  unsigned int offset)
@@ -865,24 +616,6 @@ int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
 	return samsung_chip->irq_base + offset;
 }
 
-#ifdef CONFIG_PLAT_S3C24XX
-static int s3c24xx_gpiolib_fbank_to_irq(struct gpio_chip *chip, unsigned offset)
-{
-	if (offset < 4) {
-		if (soc_is_s3c2412())
-			return IRQ_EINT0_2412 + offset;
-		else
-			return IRQ_EINT0 + offset;
-	}
-
-	if (offset < 8)
-		return IRQ_EINT4 + offset - 4;
-
-	return -EINVAL;
-}
-#endif
-
-#ifdef CONFIG_ARCH_S3C64XX
 static int s3c64xx_gpiolib_mbank_to_irq(struct gpio_chip *chip, unsigned pin)
 {
 	return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
@@ -892,109 +625,6 @@ static int s3c64xx_gpiolib_lbank_to_irq(struct gpio_chip *chip, unsigned pin)
 {
 	return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
 }
-#endif
-
-struct samsung_gpio_chip s3c24xx_gpios[] = {
-#ifdef CONFIG_PLAT_S3C24XX
-	{
-		.config	= &s3c24xx_gpiocfg_banka,
-		.chip	= {
-			.base			= S3C2410_GPA(0),
-			.owner			= THIS_MODULE,
-			.label			= "GPIOA",
-			.ngpio			= 27,
-			.direction_input	= s3c24xx_gpiolib_banka_input,
-			.direction_output	= s3c24xx_gpiolib_banka_output,
-		},
-	}, {
-		.chip	= {
-			.base	= S3C2410_GPB(0),
-			.owner	= THIS_MODULE,
-			.label	= "GPIOB",
-			.ngpio	= 11,
-		},
-	}, {
-		.chip	= {
-			.base	= S3C2410_GPC(0),
-			.owner	= THIS_MODULE,
-			.label	= "GPIOC",
-			.ngpio	= 16,
-		},
-	}, {
-		.chip	= {
-			.base	= S3C2410_GPD(0),
-			.owner	= THIS_MODULE,
-			.label	= "GPIOD",
-			.ngpio	= 16,
-		},
-	}, {
-		.chip	= {
-			.base	= S3C2410_GPE(0),
-			.label	= "GPIOE",
-			.owner	= THIS_MODULE,
-			.ngpio	= 16,
-		},
-	}, {
-		.chip	= {
-			.base	= S3C2410_GPF(0),
-			.owner	= THIS_MODULE,
-			.label	= "GPIOF",
-			.ngpio	= 8,
-			.to_irq	= s3c24xx_gpiolib_fbank_to_irq,
-		},
-	}, {
-		.irq_base = IRQ_EINT8,
-		.chip	= {
-			.base	= S3C2410_GPG(0),
-			.owner	= THIS_MODULE,
-			.label	= "GPIOG",
-			.ngpio	= 16,
-			.to_irq	= samsung_gpiolib_to_irq,
-		},
-	}, {
-		.chip	= {
-			.base	= S3C2410_GPH(0),
-			.owner	= THIS_MODULE,
-			.label	= "GPIOH",
-			.ngpio	= 15,
-		},
-	},
-		/* GPIOS for the S3C2443 and later devices. */
-	{
-		.base	= S3C2440_GPJCON,
-		.chip	= {
-			.base	= S3C2410_GPJ(0),
-			.owner	= THIS_MODULE,
-			.label	= "GPIOJ",
-			.ngpio	= 16,
-		},
-	}, {
-		.base	= S3C2443_GPKCON,
-		.chip	= {
-			.base	= S3C2410_GPK(0),
-			.owner	= THIS_MODULE,
-			.label	= "GPIOK",
-			.ngpio	= 16,
-		},
-	}, {
-		.base	= S3C2443_GPLCON,
-		.chip	= {
-			.base	= S3C2410_GPL(0),
-			.owner	= THIS_MODULE,
-			.label	= "GPIOL",
-			.ngpio	= 15,
-		},
-	}, {
-		.base	= S3C2443_GPMCON,
-		.chip	= {
-			.base	= S3C2410_GPM(0),
-			.owner	= THIS_MODULE,
-			.label	= "GPIOM",
-			.ngpio	= 2,
-		},
-	},
-#endif
-};
 
 /*
  * GPIO bank summary:
@@ -1023,7 +653,6 @@ struct samsung_gpio_chip s3c24xx_gpios[] = {
  */
 
 static struct samsung_gpio_chip s3c64xx_gpios_4bit[] = {
-#ifdef CONFIG_ARCH_S3C64XX
 	{
 		.chip	= {
 			.base	= S3C64XX_GPA(0),
@@ -1072,11 +701,9 @@ static struct samsung_gpio_chip s3c64xx_gpios_4bit[] = {
 			.to_irq = s3c64xx_gpiolib_mbank_to_irq,
 		},
 	},
-#endif
 };
 
 static struct samsung_gpio_chip s3c64xx_gpios_4bit2[] = {
-#ifdef CONFIG_ARCH_S3C64XX
 	{
 		.base	= S3C64XX_GPH_BASE + 0x4,
 		.chip	= {
@@ -1102,11 +729,9 @@ static struct samsung_gpio_chip s3c64xx_gpios_4bit2[] = {
 			.to_irq = s3c64xx_gpiolib_lbank_to_irq,
 		},
 	},
-#endif
 };
 
 static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = {
-#ifdef CONFIG_ARCH_S3C64XX
 	{
 		.base	= S3C64XX_GPF_BASE,
 		.config	= &samsung_gpio_cfgs[6],
@@ -1161,7 +786,6 @@ static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = {
 			.to_irq = samsung_gpiolib_to_irq,
 		},
 	},
-#endif
 };
 
 /* TODO: cleanup soc_is_* */
@@ -1176,12 +800,7 @@ static __init int samsung_gpiolib_init(void)
 	if (of_have_populated_dt())
 		return 0;
 
-	if (soc_is_s3c24xx()) {
-		samsung_gpiolib_set_cfg(samsung_gpio_cfgs,
-				ARRAY_SIZE(samsung_gpio_cfgs));
-		s3c24xx_gpiolib_add_chips(s3c24xx_gpios,
-				ARRAY_SIZE(s3c24xx_gpios), S3C24XX_VA_GPIO);
-	} else if (soc_is_s3c64xx()) {
+	if (soc_is_s3c64xx()) {
 		samsung_gpiolib_set_cfg(samsung_gpio_cfgs,
 				ARRAY_SIZE(samsung_gpio_cfgs));
 		samsung_gpiolib_add_2bit_chips(s3c64xx_gpios_2bit,
@@ -1249,25 +868,6 @@ int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
 }
 EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range);
 
-unsigned s3c_gpio_getcfg(unsigned int pin)
-{
-	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
-	unsigned long flags;
-	unsigned ret = 0;
-	int offset;
-
-	if (chip) {
-		offset = pin - chip->chip.base;
-
-		samsung_gpio_lock(chip, flags);
-		ret = samsung_gpio_do_getcfg(chip, offset);
-		samsung_gpio_unlock(chip, flags);
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL(s3c_gpio_getcfg);
-
 int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull)
 {
 	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
@@ -1286,40 +886,3 @@ int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull)
 	return ret;
 }
 EXPORT_SYMBOL(s3c_gpio_setpull);
-
-samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin)
-{
-	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
-	unsigned long flags;
-	int offset;
-	u32 pup = 0;
-
-	if (chip) {
-		offset = pin - chip->chip.base;
-
-		samsung_gpio_lock(chip, flags);
-		pup = samsung_gpio_do_getpull(chip, offset);
-		samsung_gpio_unlock(chip, flags);
-	}
-
-	return (__force samsung_gpio_pull_t)pup;
-}
-EXPORT_SYMBOL(s3c_gpio_getpull);
-
-#ifdef CONFIG_PLAT_S3C24XX
-unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
-{
-	unsigned long flags;
-	unsigned long misccr;
-
-	local_irq_save(flags);
-	misccr = __raw_readl(S3C24XX_MISCCR);
-	misccr &= ~clear;
-	misccr ^= change;
-	__raw_writel(misccr, S3C24XX_MISCCR);
-	local_irq_restore(flags);
-
-	return misccr;
-}
-EXPORT_SYMBOL(s3c2410_modify_misccr);
-#endif
diff --git a/arch/arm/mach-s3c/gpio-samsung.h b/arch/arm/mach-s3c/gpio-samsung.h
index 02f6f4a96862..4233515eddaa 100644
--- a/arch/arm/mach-s3c/gpio-samsung.h
+++ b/arch/arm/mach-s3c/gpio-samsung.h
@@ -1,9 +1,2 @@
 /* SPDX-License-Identifier: GPL-2.0 */
-
-#ifdef CONFIG_ARCH_S3C24XX
-#include "gpio-samsung-s3c24xx.h"
-#endif
-
-#ifdef CONFIG_ARCH_S3C64XX
 #include "gpio-samsung-s3c64xx.h"
-#endif
diff --git a/arch/arm/mach-s3c/gta02.h b/arch/arm/mach-s3c/gta02.h
deleted file mode 100644
index 043ae382bfc5..000000000000
--- a/arch/arm/mach-s3c/gta02.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * GTA02 header
- */
-
-#ifndef __MACH_S3C24XX_GTA02_H
-#define __MACH_S3C24XX_GTA02_H __FILE__
-
-#include "regs-gpio.h"
-
-#define GTA02_GPIO_AUX_LED	S3C2410_GPB(2)
-#define GTA02_GPIO_USB_PULLUP	S3C2410_GPB(9)
-#define GTA02_GPIO_AUX_KEY	S3C2410_GPF(6)
-#define GTA02_GPIO_HOLD_KEY	S3C2410_GPF(7)
-#define GTA02_GPIO_AMP_SHUT	S3C2410_GPJ(1)	/* v2 + v3 + v4 only */
-#define GTA02_GPIO_HP_IN	S3C2410_GPJ(2)	/* v2 + v3 + v4 only */
-
-#define GTA02_IRQ_PCF50633	IRQ_EINT9
-
-#endif /* __MACH_S3C24XX_GTA02_H */
diff --git a/arch/arm/mach-s3c/h1940-bluetooth.c b/arch/arm/mach-s3c/h1940-bluetooth.c
deleted file mode 100644
index 59edcf8a620d..000000000000
--- a/arch/arm/mach-s3c/h1940-bluetooth.c
+++ /dev/null
@@ -1,140 +0,0 @@
-// SPDX-License-Identifier: GPL-1.0+
-//
-// Copyright (c) Arnaud Patard <arnaud.patard@rtp-net.org>
-//
-//	    S3C2410 bluetooth "driver"
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/ctype.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/rfkill.h>
-
-#include "gpio-cfg.h"
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-
-#include "h1940.h"
-
-#define DRV_NAME "h1940-bt"
-
-/* Bluetooth control */
-static void h1940bt_enable(int on)
-{
-	if (on) {
-		/* Power on the chip */
-		gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 1);
-		/* Reset the chip */
-		mdelay(10);
-
-		gpio_set_value(S3C2410_GPH(1), 1);
-		mdelay(10);
-		gpio_set_value(S3C2410_GPH(1), 0);
-
-		h1940_led_blink_set(NULL, GPIO_LED_BLINK, NULL, NULL);
-	}
-	else {
-		gpio_set_value(S3C2410_GPH(1), 1);
-		mdelay(10);
-		gpio_set_value(S3C2410_GPH(1), 0);
-		mdelay(10);
-		gpio_set_value(H1940_LATCH_BLUETOOTH_POWER, 0);
-
-		h1940_led_blink_set(NULL, GPIO_LED_NO_BLINK_LOW, NULL, NULL);
-	}
-}
-
-static int h1940bt_set_block(void *data, bool blocked)
-{
-	h1940bt_enable(!blocked);
-	return 0;
-}
-
-static const struct rfkill_ops h1940bt_rfkill_ops = {
-	.set_block = h1940bt_set_block,
-};
-
-static int h1940bt_probe(struct platform_device *pdev)
-{
-	struct rfkill *rfk;
-	int ret = 0;
-
-	ret = gpio_request(S3C2410_GPH(1), dev_name(&pdev->dev));
-	if (ret) {
-		dev_err(&pdev->dev, "could not get GPH1\n");
-		return ret;
-	}
-
-	ret = gpio_request(H1940_LATCH_BLUETOOTH_POWER, dev_name(&pdev->dev));
-	if (ret) {
-		gpio_free(S3C2410_GPH(1));
-		dev_err(&pdev->dev, "could not get BT_POWER\n");
-		return ret;
-	}
-
-	/* Configures BT serial port GPIOs */
-	s3c_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
-	s3c_gpio_setpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
-	s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
-	s3c_gpio_setpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
-	s3c_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
-	s3c_gpio_setpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
-	s3c_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
-	s3c_gpio_setpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
-
-	rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH,
-			&h1940bt_rfkill_ops, NULL);
-	if (!rfk) {
-		ret = -ENOMEM;
-		goto err_rfk_alloc;
-	}
-
-	ret = rfkill_register(rfk);
-	if (ret)
-		goto err_rfkill;
-
-	platform_set_drvdata(pdev, rfk);
-
-	return 0;
-
-err_rfkill:
-	rfkill_destroy(rfk);
-err_rfk_alloc:
-	return ret;
-}
-
-static int h1940bt_remove(struct platform_device *pdev)
-{
-	struct rfkill *rfk = platform_get_drvdata(pdev);
-
-	platform_set_drvdata(pdev, NULL);
-	gpio_free(S3C2410_GPH(1));
-
-	if (rfk) {
-		rfkill_unregister(rfk);
-		rfkill_destroy(rfk);
-	}
-	rfk = NULL;
-
-	h1940bt_enable(0);
-
-	return 0;
-}
-
-
-static struct platform_driver h1940bt_driver = {
-	.driver		= {
-		.name	= DRV_NAME,
-	},
-	.probe		= h1940bt_probe,
-	.remove		= h1940bt_remove,
-};
-
-module_platform_driver(h1940bt_driver);
-
-MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>");
-MODULE_DESCRIPTION("Driver for the iPAQ H1940 bluetooth chip");
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-s3c/h1940.h b/arch/arm/mach-s3c/h1940.h
deleted file mode 100644
index 5dfe9d10cd15..000000000000
--- a/arch/arm/mach-s3c/h1940.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2006 Ben Dooks <ben-linux@fluff.org>
- *
- * Copyright (c) 2005 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * iPAQ H1940 series definitions
- */
-
-#ifndef __MACH_S3C24XX_H1940_H
-#define __MACH_S3C24XX_H1940_H __FILE__
-
-#define H1940_SUSPEND_CHECKSUM		(0x30003ff8)
-#define H1940_SUSPEND_RESUMEAT		(0x30081000)
-#define H1940_SUSPEND_CHECK		(0x30080000)
-
-struct gpio_desc;
-
-extern void h1940_pm_return(void);
-extern int h1940_led_blink_set(struct gpio_desc *desc, int state,
-			       unsigned long *delay_on,
-			       unsigned long *delay_off);
-
-#include <linux/gpio.h>
-
-#define H1940_LATCH_GPIO(x)		(S3C_GPIO_END + (x))
-
-/* SD layer latch */
-
-#define H1940_LATCH_LCD_P0		H1940_LATCH_GPIO(0)
-#define H1940_LATCH_LCD_P1		H1940_LATCH_GPIO(1)
-#define H1940_LATCH_LCD_P2		H1940_LATCH_GPIO(2)
-#define H1940_LATCH_LCD_P3		H1940_LATCH_GPIO(3)
-#define H1940_LATCH_MAX1698_nSHUTDOWN	H1940_LATCH_GPIO(4)
-#define H1940_LATCH_LED_RED		H1940_LATCH_GPIO(5)
-#define H1940_LATCH_SDQ7		H1940_LATCH_GPIO(6)
-#define H1940_LATCH_USB_DP		H1940_LATCH_GPIO(7)
-
-/* CPU layer latch */
-
-#define H1940_LATCH_UDA_POWER		H1940_LATCH_GPIO(8)
-#define H1940_LATCH_AUDIO_POWER		H1940_LATCH_GPIO(9)
-#define H1940_LATCH_SM803_ENABLE	H1940_LATCH_GPIO(10)
-#define H1940_LATCH_LCD_P4		H1940_LATCH_GPIO(11)
-#define H1940_LATCH_SD_POWER		H1940_LATCH_GPIO(12)
-#define H1940_LATCH_BLUETOOTH_POWER	H1940_LATCH_GPIO(13)
-#define H1940_LATCH_LED_GREEN		H1940_LATCH_GPIO(14)
-#define H1940_LATCH_LED_FLASH		H1940_LATCH_GPIO(15)
-
-#endif /* __MACH_S3C24XX_H1940_H */
diff --git a/arch/arm/mach-s3c/hardware-s3c24xx.h b/arch/arm/mach-s3c/hardware-s3c24xx.h
deleted file mode 100644
index 33b37467d05f..000000000000
--- a/arch/arm/mach-s3c/hardware-s3c24xx.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2003 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - hardware
- */
-
-#ifndef __ASM_ARCH_HARDWARE_S3C24XX_H
-#define __ASM_ARCH_HARDWARE_S3C24XX_H
-
-extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
-
-#endif /* __ASM_ARCH_HARDWARE_S3C24XX_H */
diff --git a/arch/arm/mach-s3c/iic-core.h b/arch/arm/mach-s3c/iic-core.h
index c5cfd5af3874..6672691bd7b8 100644
--- a/arch/arm/mach-s3c/iic-core.h
+++ b/arch/arm/mach-s3c/iic-core.h
@@ -28,11 +28,4 @@ static inline void s3c_i2c1_setname(char *name)
 #endif
 }
 
-static inline void s3c_i2c2_setname(char *name)
-{
-#ifdef CONFIG_S3C_DEV_I2C2
-	s3c_device_i2c2.name = name;
-#endif
-}
-
 #endif /* __ASM_ARCH_IIC_H */
diff --git a/arch/arm/mach-s3c/init.c b/arch/arm/mach-s3c/init.c
index bf513616f55d..0ac079f23d51 100644
--- a/arch/arm/mach-s3c/init.c
+++ b/arch/arm/mach-s3c/init.c
@@ -63,29 +63,6 @@ void __init s3c_init_cpu(unsigned long idcode,
 	pr_err("The platform is deprecated and scheduled for removal. Please reach to the maintainers of the platform and linux-samsung-soc@vger.kernel.org if you still use it.  Without such feedback, the platform will be removed after 2022.\n");
 }
 
-/* s3c24xx_init_clocks
- *
- * Initialise the clock subsystem and associated information from the
- * given master crystal value.
- *
- * xtal  = 0 -> use default PLL crystal value (normally 12MHz)
- *      != 0 -> PLL crystal value in Hz
-*/
-
-void __init s3c24xx_init_clocks(int xtal)
-{
-	if (xtal == 0)
-		xtal = 12*1000*1000;
-
-	if (cpu == NULL)
-		panic("s3c24xx_init_clocks: no cpu setup?\n");
-
-	if (cpu->init_clocks == NULL)
-		panic("s3c24xx_init_clocks: cpu has no clock init\n");
-	else
-		(cpu->init_clocks)(xtal);
-}
-
 /* uart management */
 #if IS_ENABLED(CONFIG_SAMSUNG_ATAGS)
 static int nr_uarts __initdata = 0;
@@ -150,8 +127,7 @@ static int __init s3c_arch_init(void)
 	int ret;
 
 	/* init is only needed for ATAGS based platforms */
-	if (!IS_ENABLED(CONFIG_ATAGS) ||
-	    (!soc_is_s3c24xx() && !soc_is_s3c64xx()))
+	if (!IS_ENABLED(CONFIG_ATAGS))
 		return 0;
 
 	// do the correct init for cpu
diff --git a/arch/arm/mach-s3c/iotiming-s3c2410.c b/arch/arm/mach-s3c/iotiming-s3c2410.c
deleted file mode 100644
index 09f388d8f824..000000000000
--- a/arch/arm/mach-s3c/iotiming-s3c2410.c
+++ /dev/null
@@ -1,472 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2006-2009 Simtec Electronics
-//	http://armlinux.simtec.co.uk/
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// S3C24XX CPU Frequency scaling - IO timing for S3C2410/S3C2440/S3C2442
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/cpufreq.h>
-#include <linux/seq_file.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-#include "map.h"
-#include "regs-clock.h"
-
-#include <linux/soc/samsung/s3c-cpufreq-core.h>
-
-#include "regs-mem-s3c24xx.h"
-
-#define print_ns(x) ((x) / 10), ((x) % 10)
-
-/**
- * s3c2410_print_timing - print bank timing data for debug purposes
- * @pfx: The prefix to put on the output
- * @timings: The timing inforamtion to print.
-*/
-static void s3c2410_print_timing(const char *pfx,
-				 struct s3c_iotimings *timings)
-{
-	struct s3c2410_iobank_timing *bt;
-	int bank;
-
-	for (bank = 0; bank < MAX_BANKS; bank++) {
-		bt = timings->bank[bank].io_2410;
-		if (!bt)
-			continue;
-
-		printk(KERN_DEBUG "%s %d: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, "
-		       "Tcoh=%d.%d, Tcah=%d.%d\n", pfx, bank,
-		       print_ns(bt->tacs),
-		       print_ns(bt->tcos),
-		       print_ns(bt->tacc),
-		       print_ns(bt->tcoh),
-		       print_ns(bt->tcah));
-	}
-}
-
-/**
- * bank_reg - convert bank number to pointer to the control register.
- * @bank: The IO bank number.
- */
-static inline void __iomem *bank_reg(unsigned int bank)
-{
-	return S3C2410_BANKCON0 + (bank << 2);
-}
-
-/**
- * bank_is_io - test whether bank is used for IO
- * @bankcon: The bank control register.
- *
- * This is a simplistic test to see if any BANKCON[x] is not an IO
- * bank. It currently does not take into account whether BWSCON has
- * an illegal width-setting in it, or if the pin connected to nCS[x]
- * is actually being handled as a chip-select.
- */
-static inline int bank_is_io(unsigned long bankcon)
-{
-	return !(bankcon & S3C2410_BANKCON_SDRAM);
-}
-
-/**
- * to_div - convert cycle time to divisor
- * @cyc: The cycle time, in 10ths of nanoseconds.
- * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
- *
- * Convert the given cycle time into the divisor to use to obtain it from
- * HCLK.
-*/
-static inline unsigned int to_div(unsigned int cyc, unsigned int hclk_tns)
-{
-	if (cyc == 0)
-		return 0;
-
-	return DIV_ROUND_UP(cyc, hclk_tns);
-}
-
-/**
- * calc_0124 - calculate divisor control for divisors that do /0, /1. /2 and /4
- * @cyc: The cycle time, in 10ths of nanoseconds.
- * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
- * @v: Pointer to register to alter.
- * @shift: The shift to get to the control bits.
- *
- * Calculate the divisor, and turn it into the correct control bits to
- * set in the result, @v.
- */
-static unsigned int calc_0124(unsigned int cyc, unsigned long hclk_tns,
-			      unsigned long *v, int shift)
-{
-	unsigned int div = to_div(cyc, hclk_tns);
-	unsigned long val;
-
-	s3c_freq_iodbg("%s: cyc=%d, hclk=%lu, shift=%d => div %d\n",
-		       __func__, cyc, hclk_tns, shift, div);
-
-	switch (div) {
-	case 0:
-		val = 0;
-		break;
-	case 1:
-		val = 1;
-		break;
-	case 2:
-		val = 2;
-		break;
-	case 3:
-	case 4:
-		val = 3;
-		break;
-	default:
-		return -1;
-	}
-
-	*v |= val << shift;
-	return 0;
-}
-
-static int calc_tacp(unsigned int cyc, unsigned long hclk, unsigned long *v)
-{
-	/* Currently no support for Tacp calculations. */
-	return 0;
-}
-
-/**
- * calc_tacc - calculate divisor control for tacc.
- * @cyc: The cycle time, in 10ths of nanoseconds.
- * @nwait_en: IS nWAIT enabled for this bank.
- * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
- * @v: Pointer to register to alter.
- *
- * Calculate the divisor control for tACC, taking into account whether
- * the bank has nWAIT enabled. The result is used to modify the value
- * pointed to by @v.
-*/
-static int calc_tacc(unsigned int cyc, int nwait_en,
-		     unsigned long hclk_tns, unsigned long *v)
-{
-	unsigned int div = to_div(cyc, hclk_tns);
-	unsigned long val;
-
-	s3c_freq_iodbg("%s: cyc=%u, nwait=%d, hclk=%lu => div=%u\n",
-		       __func__, cyc, nwait_en, hclk_tns, div);
-
-	/* if nWait enabled on an bank, Tacc must be at-least 4 cycles. */
-	if (nwait_en && div < 4)
-		div = 4;
-
-	switch (div) {
-	case 0:
-		val = 0;
-		break;
-
-	case 1:
-	case 2:
-	case 3:
-	case 4:
-		val = div - 1;
-		break;
-
-	case 5:
-	case 6:
-		val = 4;
-		break;
-
-	case 7:
-	case 8:
-		val = 5;
-		break;
-
-	case 9:
-	case 10:
-		val = 6;
-		break;
-
-	case 11:
-	case 12:
-	case 13:
-	case 14:
-		val = 7;
-		break;
-
-	default:
-		return -1;
-	}
-
-	*v |= val << 8;
-	return 0;
-}
-
-/**
- * s3c2410_calc_bank - calculate bank timing information
- * @cfg: The configuration we need to calculate for.
- * @bt: The bank timing information.
- *
- * Given the cycle timine for a bank @bt, calculate the new BANKCON
- * setting for the @cfg timing. This updates the timing information
- * ready for the cpu frequency change.
- */
-static int s3c2410_calc_bank(struct s3c_cpufreq_config *cfg,
-			     struct s3c2410_iobank_timing *bt)
-{
-	unsigned long hclk = cfg->freq.hclk_tns;
-	unsigned long res;
-	int ret;
-
-	res  = bt->bankcon;
-	res &= (S3C2410_BANKCON_SDRAM | S3C2410_BANKCON_PMC16);
-
-	/* tacp: 2,3,4,5 */
-	/* tcah: 0,1,2,4 */
-	/* tcoh: 0,1,2,4 */
-	/* tacc: 1,2,3,4,6,7,10,14 (>4 for nwait) */
-	/* tcos: 0,1,2,4 */
-	/* tacs: 0,1,2,4 */
-
-	ret  = calc_0124(bt->tacs, hclk, &res, S3C2410_BANKCON_Tacs_SHIFT);
-	ret |= calc_0124(bt->tcos, hclk, &res, S3C2410_BANKCON_Tcos_SHIFT);
-	ret |= calc_0124(bt->tcah, hclk, &res, S3C2410_BANKCON_Tcah_SHIFT);
-	ret |= calc_0124(bt->tcoh, hclk, &res, S3C2410_BANKCON_Tcoh_SHIFT);
-
-	if (ret)
-		return -EINVAL;
-
-	ret |= calc_tacp(bt->tacp, hclk, &res);
-	ret |= calc_tacc(bt->tacc, bt->nwait_en, hclk, &res);
-
-	if (ret)
-		return -EINVAL;
-
-	bt->bankcon = res;
-	return 0;
-}
-
-static const unsigned int tacc_tab[] = {
-	[0]	= 1,
-	[1]	= 2,
-	[2]	= 3,
-	[3]	= 4,
-	[4]	= 6,
-	[5]	= 9,
-	[6]	= 10,
-	[7]	= 14,
-};
-
-/**
- * get_tacc - turn tACC value into cycle time
- * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
- * @val: The bank timing register value, shifted down.
- */
-static unsigned int get_tacc(unsigned long hclk_tns,
-			     unsigned long val)
-{
-	val &= 7;
-	return hclk_tns * tacc_tab[val];
-}
-
-/**
- * get_0124 - turn 0/1/2/4 divider into cycle time
- * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
- * @val: The bank timing register value, shifed down.
- */
-static unsigned int get_0124(unsigned long hclk_tns,
-			     unsigned long val)
-{
-	val &= 3;
-	return hclk_tns * ((val == 3) ? 4 : val);
-}
-
-/**
- * s3c2410_iotiming_getbank - turn BANKCON into cycle time information
- * @cfg: The frequency configuration
- * @bt: The bank timing to fill in (uses cached BANKCON)
- *
- * Given the BANKCON setting in @bt and the current frequency settings
- * in @cfg, update the cycle timing information.
- */
-static void s3c2410_iotiming_getbank(struct s3c_cpufreq_config *cfg,
-				     struct s3c2410_iobank_timing *bt)
-{
-	unsigned long bankcon = bt->bankcon;
-	unsigned long hclk = cfg->freq.hclk_tns;
-
-	bt->tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
-	bt->tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
-	bt->tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
-	bt->tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
-	bt->tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
-}
-
-/**
- * s3c2410_iotiming_debugfs - debugfs show io bank timing information
- * @seq: The seq_file to write output to using seq_printf().
- * @cfg: The current configuration.
- * @iob: The IO bank information to decode.
- */
-void s3c2410_iotiming_debugfs(struct seq_file *seq,
-			      struct s3c_cpufreq_config *cfg,
-			      union s3c_iobank *iob)
-{
-	struct s3c2410_iobank_timing *bt = iob->io_2410;
-	unsigned long bankcon = bt->bankcon;
-	unsigned long hclk = cfg->freq.hclk_tns;
-	unsigned int tacs;
-	unsigned int tcos;
-	unsigned int tacc;
-	unsigned int tcoh;
-	unsigned int tcah;
-
-	seq_printf(seq, "BANKCON=0x%08lx\n", bankcon);
-
-	tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
-	tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
-	tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
-	tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
-	tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
-
-	seq_printf(seq,
-		   "\tRead: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
-		   print_ns(bt->tacs),
-		   print_ns(bt->tcos),
-		   print_ns(bt->tacc),
-		   print_ns(bt->tcoh),
-		   print_ns(bt->tcah));
-
-	seq_printf(seq,
-		   "\t Set: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
-		   print_ns(tacs),
-		   print_ns(tcos),
-		   print_ns(tacc),
-		   print_ns(tcoh),
-		   print_ns(tcah));
-}
-
-/**
- * s3c2410_iotiming_calc - Calculate bank timing for frequency change.
- * @cfg: The frequency configuration
- * @iot: The IO timing information to fill out.
- *
- * Calculate the new values for the banks in @iot based on the new
- * frequency information in @cfg. This is then used by s3c2410_iotiming_set()
- * to update the timing when necessary.
- */
-int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
-			  struct s3c_iotimings *iot)
-{
-	struct s3c2410_iobank_timing *bt;
-	unsigned long bankcon;
-	int bank;
-	int ret;
-
-	for (bank = 0; bank < MAX_BANKS; bank++) {
-		bankcon = __raw_readl(bank_reg(bank));
-		bt = iot->bank[bank].io_2410;
-
-		if (!bt)
-			continue;
-
-		bt->bankcon = bankcon;
-
-		ret = s3c2410_calc_bank(cfg, bt);
-		if (ret) {
-			printk(KERN_ERR "%s: cannot calculate bank %d io\n",
-			       __func__, bank);
-			goto err;
-		}
-
-		s3c_freq_iodbg("%s: bank %d: con=%08lx\n",
-			       __func__, bank, bt->bankcon);
-	}
-
-	return 0;
- err:
-	return ret;
-}
-
-/**
- * s3c2410_iotiming_set - set the IO timings from the given setup.
- * @cfg: The frequency configuration
- * @iot: The IO timing information to use.
- *
- * Set all the currently used IO bank timing information generated
- * by s3c2410_iotiming_calc() once the core has validated that all
- * the new values are within permitted bounds.
- */
-void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
-			  struct s3c_iotimings *iot)
-{
-	struct s3c2410_iobank_timing *bt;
-	int bank;
-
-	/* set the io timings from the specifier */
-
-	for (bank = 0; bank < MAX_BANKS; bank++) {
-		bt = iot->bank[bank].io_2410;
-		if (!bt)
-			continue;
-
-		__raw_writel(bt->bankcon, bank_reg(bank));
-	}
-}
-
-/**
- * s3c2410_iotiming_get - Get the timing information from current registers.
- * @cfg: The frequency configuration
- * @timings: The IO timing information to fill out.
- *
- * Calculate the @timings timing information from the current frequency
- * information in @cfg, and the new frequency configuration
- * through all the IO banks, reading the state and then updating @iot
- * as necessary.
- *
- * This is used at the moment on initialisation to get the current
- * configuration so that boards do not have to carry their own setup
- * if the timings are correct on initialisation.
- */
-
-int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
-			 struct s3c_iotimings *timings)
-{
-	struct s3c2410_iobank_timing *bt;
-	unsigned long bankcon;
-	unsigned long bwscon;
-	int bank;
-
-	bwscon = __raw_readl(S3C2410_BWSCON);
-
-	/* look through all banks to see what is currently set. */
-
-	for (bank = 0; bank < MAX_BANKS; bank++) {
-		bankcon = __raw_readl(bank_reg(bank));
-
-		if (!bank_is_io(bankcon))
-			continue;
-
-		s3c_freq_iodbg("%s: bank %d: con %08lx\n",
-			       __func__, bank, bankcon);
-
-		bt = kzalloc(sizeof(*bt), GFP_KERNEL);
-		if (!bt)
-			return -ENOMEM;
-
-		/* find out in nWait is enabled for bank. */
-
-		if (bank != 0) {
-			unsigned long tmp  = S3C2410_BWSCON_GET(bwscon, bank);
-			if (tmp & S3C2410_BWSCON_WS)
-				bt->nwait_en = 1;
-		}
-
-		timings->bank[bank].io_2410 = bt;
-		bt->bankcon = bankcon;
-
-		s3c2410_iotiming_getbank(cfg, bt);
-	}
-
-	s3c2410_print_timing("get", timings);
-	return 0;
-}
diff --git a/arch/arm/mach-s3c/iotiming-s3c2412.c b/arch/arm/mach-s3c/iotiming-s3c2412.c
deleted file mode 100644
index 003f89c4dc53..000000000000
--- a/arch/arm/mach-s3c/iotiming-s3c2412.c
+++ /dev/null
@@ -1,278 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2006-2008 Simtec Electronics
-//	http://armlinux.simtec.co.uk/
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// S3C2412/S3C2443 (PL093 based) IO timing support
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/cpufreq.h>
-#include <linux/seq_file.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-
-#include <linux/amba/pl093.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "cpu.h"
-#include <linux/soc/samsung/s3c-cpufreq-core.h>
-
-#include "s3c2412.h"
-
-#define print_ns(x) ((x) / 10), ((x) % 10)
-
-/**
- * s3c2412_print_timing - print timing information via printk.
- * @pfx: The prefix to print each line with.
- * @iot: The IO timing information
- */
-static void s3c2412_print_timing(const char *pfx, struct s3c_iotimings *iot)
-{
-	struct s3c2412_iobank_timing *bt;
-	unsigned int bank;
-
-	for (bank = 0; bank < MAX_BANKS; bank++) {
-		bt = iot->bank[bank].io_2412;
-		if (!bt)
-			continue;
-
-		printk(KERN_DEBUG "%s: %d: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
-		       "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n", pfx, bank,
-		       print_ns(bt->idcy),
-		       print_ns(bt->wstrd),
-		       print_ns(bt->wstwr),
-		       print_ns(bt->wstoen),
-		       print_ns(bt->wstwen),
-		       print_ns(bt->wstbrd));
-	}
-}
-
-/**
- * to_div - turn a cycle length into a divisor setting.
- * @cyc_tns: The cycle time in 10ths of nanoseconds.
- * @clk_tns: The clock period in 10ths of nanoseconds.
- */
-static inline unsigned int to_div(unsigned int cyc_tns, unsigned int clk_tns)
-{
-	return cyc_tns ? DIV_ROUND_UP(cyc_tns, clk_tns) : 0;
-}
-
-/**
- * calc_timing - calculate timing divisor value and check in range.
- * @hwtm: The hardware timing in 10ths of nanoseconds.
- * @clk_tns: The clock period in 10ths of nanoseconds.
- * @err: Pointer to err variable to update in event of failure.
- */
-static unsigned int calc_timing(unsigned int hwtm, unsigned int clk_tns,
-				unsigned int *err)
-{
-	unsigned int ret = to_div(hwtm, clk_tns);
-
-	if (ret > 0xf)
-		*err = -EINVAL;
-
-	return ret;
-}
-
-/**
- * s3c2412_calc_bank - calculate the bank divisor settings.
- * @cfg: The current frequency configuration.
- * @bt: The bank timing.
- */
-static int s3c2412_calc_bank(struct s3c_cpufreq_config *cfg,
-			     struct s3c2412_iobank_timing *bt)
-{
-	unsigned int hclk = cfg->freq.hclk_tns;
-	int err = 0;
-
-	bt->smbidcyr = calc_timing(bt->idcy, hclk, &err);
-	bt->smbwstrd = calc_timing(bt->wstrd, hclk, &err);
-	bt->smbwstwr = calc_timing(bt->wstwr, hclk, &err);
-	bt->smbwstoen = calc_timing(bt->wstoen, hclk, &err);
-	bt->smbwstwen = calc_timing(bt->wstwen, hclk, &err);
-	bt->smbwstbrd = calc_timing(bt->wstbrd, hclk, &err);
-
-	return err;
-}
-
-/**
- * s3c2412_iotiming_debugfs - debugfs show io bank timing information
- * @seq: The seq_file to write output to using seq_printf().
- * @cfg: The current configuration.
- * @iob: The IO bank information to decode.
-*/
-void s3c2412_iotiming_debugfs(struct seq_file *seq,
-			      struct s3c_cpufreq_config *cfg,
-			      union s3c_iobank *iob)
-{
-	struct s3c2412_iobank_timing *bt = iob->io_2412;
-
-	seq_printf(seq,
-		   "\tRead: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
-		   "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n",
-		   print_ns(bt->idcy),
-		   print_ns(bt->wstrd),
-		   print_ns(bt->wstwr),
-		   print_ns(bt->wstoen),
-		   print_ns(bt->wstwen),
-		   print_ns(bt->wstbrd));
-}
-
-/**
- * s3c2412_iotiming_calc - calculate all the bank divisor settings.
- * @cfg: The current frequency configuration.
- * @iot: The bank timing information.
- *
- * Calculate the timing information for all the banks that are
- * configured as IO, using s3c2412_calc_bank().
- */
-int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
-			  struct s3c_iotimings *iot)
-{
-	struct s3c2412_iobank_timing *bt;
-	int bank;
-	int ret;
-
-	for (bank = 0; bank < MAX_BANKS; bank++) {
-		bt = iot->bank[bank].io_2412;
-		if (!bt)
-			continue;
-
-		ret = s3c2412_calc_bank(cfg, bt);
-		if (ret) {
-			printk(KERN_ERR "%s: cannot calculate bank %d io\n",
-			       __func__, bank);
-			goto err;
-		}
-	}
-
-	return 0;
- err:
-	return ret;
-}
-
-/**
- * s3c2412_iotiming_set - set the timing information
- * @cfg: The current frequency configuration.
- * @iot: The bank timing information.
- *
- * Set the IO bank information from the details calculated earlier from
- * calling s3c2412_iotiming_calc().
- */
-void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
-			  struct s3c_iotimings *iot)
-{
-	struct s3c2412_iobank_timing *bt;
-	void __iomem *regs;
-	int bank;
-
-	/* set the io timings from the specifier */
-
-	for (bank = 0; bank < MAX_BANKS; bank++) {
-		bt = iot->bank[bank].io_2412;
-		if (!bt)
-			continue;
-
-		regs = S3C2412_SSMC_BANK(bank);
-
-		__raw_writel(bt->smbidcyr, regs + SMBIDCYR);
-		__raw_writel(bt->smbwstrd, regs + SMBWSTRDR);
-		__raw_writel(bt->smbwstwr, regs + SMBWSTWRR);
-		__raw_writel(bt->smbwstoen, regs + SMBWSTOENR);
-		__raw_writel(bt->smbwstwen, regs + SMBWSTWENR);
-		__raw_writel(bt->smbwstbrd, regs + SMBWSTBRDR);
-	}
-}
-
-static inline unsigned int s3c2412_decode_timing(unsigned int clock, u32 reg)
-{
-	return (reg & 0xf) * clock;
-}
-
-static void s3c2412_iotiming_getbank(struct s3c_cpufreq_config *cfg,
-				     struct s3c2412_iobank_timing *bt,
-				     unsigned int bank)
-{
-	unsigned long clk = cfg->freq.hclk_tns;  /* ssmc clock??? */
-	void __iomem *regs = S3C2412_SSMC_BANK(bank);
-
-	bt->idcy = s3c2412_decode_timing(clk, __raw_readl(regs + SMBIDCYR));
-	bt->wstrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTRDR));
-	bt->wstoen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTOENR));
-	bt->wstwen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTWENR));
-	bt->wstbrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTBRDR));
-}
-
-/**
- * bank_is_io - return true if bank is (possibly) IO.
- * @bank: The bank number.
- * @bankcfg: The value of S3C2412_EBI_BANKCFG.
- */
-static inline bool bank_is_io(unsigned int bank, u32 bankcfg)
-{
-	if (bank < 2)
-		return true;
-
-	return !(bankcfg & (1 << bank));
-}
-
-int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
-			 struct s3c_iotimings *timings)
-{
-	struct s3c2412_iobank_timing *bt;
-	u32 bankcfg = __raw_readl(S3C2412_EBI_BANKCFG);
-	unsigned int bank;
-
-	/* look through all banks to see what is currently set. */
-
-	for (bank = 0; bank < MAX_BANKS; bank++) {
-		if (!bank_is_io(bank, bankcfg))
-			continue;
-
-		bt = kzalloc(sizeof(*bt), GFP_KERNEL);
-		if (!bt)
-			return -ENOMEM;
-
-		timings->bank[bank].io_2412 = bt;
-		s3c2412_iotiming_getbank(cfg, bt, bank);
-	}
-
-	s3c2412_print_timing("get", timings);
-	return 0;
-}
-
-/* this is in here as it is so small, it doesn't currently warrant a file
- * to itself. We expect that any s3c24xx needing this is going to also
- * need the iotiming support.
- */
-void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
-{
-	struct s3c_cpufreq_board *board = cfg->board;
-	u32 refresh;
-
-	WARN_ON(board == NULL);
-
-	/* Reduce both the refresh time (in ns) and the frequency (in MHz)
-	 * down to ensure that we do not overflow 32 bit numbers.
-	 *
-	 * This should work for HCLK up to 133MHz and refresh period up
-	 * to 30usec.
-	 */
-
-	refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
-	refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale  */
-	refresh &= ((1 << 16) - 1);
-
-	s3c_freq_dbg("%s: refresh value %u\n", __func__, (unsigned int)refresh);
-
-	__raw_writel(refresh, S3C2412_REFRESH);
-}
diff --git a/arch/arm/mach-s3c/irq-pm-s3c24xx.c b/arch/arm/mach-s3c/irq-pm-s3c24xx.c
deleted file mode 100644
index 55f41135ad70..000000000000
--- a/arch/arm/mach-s3c/irq-pm-s3c24xx.c
+++ /dev/null
@@ -1,115 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2003-2004 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//	http://armlinux.simtec.co.uk/
-//
-// S3C24XX - IRQ PM code
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/syscore_ops.h>
-#include <linux/io.h>
-
-#include "cpu.h"
-#include "pm.h"
-#include "map-base.h"
-#include "map-s3c.h"
-
-#include "regs-irq.h"
-#include "regs-gpio.h"
-#include "pm-core.h"
-
-#include <asm/irq.h>
-
-int s3c_irq_wake(struct irq_data *data, unsigned int state)
-{
-	unsigned long irqbit = 1 << data->hwirq;
-
-	if (!(s3c_irqwake_intallow & irqbit))
-		return -ENOENT;
-
-	pr_info("wake %s for hwirq %lu\n",
-		state ? "enabled" : "disabled", data->hwirq);
-
-	if (!state)
-		s3c_irqwake_intmask |= irqbit;
-	else
-		s3c_irqwake_intmask &= ~irqbit;
-
-	return 0;
-}
-
-static struct sleep_save irq_save[] = {
-	SAVE_ITEM(S3C2410_INTMSK),
-	SAVE_ITEM(S3C2410_INTSUBMSK),
-};
-
-/* the extint values move between the s3c2410/s3c2440 and the s3c2412
- * so we use an array to hold them, and to calculate the address of
- * the register at run-time
-*/
-
-static unsigned long save_extint[3];
-static unsigned long save_eintflt[4];
-static unsigned long save_eintmask;
-
-static int s3c24xx_irq_suspend(void)
-{
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(save_extint); i++)
-		save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4));
-
-	for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
-		save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4));
-
-	s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
-	save_eintmask = __raw_readl(S3C24XX_EINTMASK);
-
-	return 0;
-}
-
-static void s3c24xx_irq_resume(void)
-{
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(save_extint); i++)
-		__raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4));
-
-	for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
-		__raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4));
-
-	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
-	__raw_writel(save_eintmask, S3C24XX_EINTMASK);
-}
-
-struct syscore_ops s3c24xx_irq_syscore_ops = {
-	.suspend	= s3c24xx_irq_suspend,
-	.resume		= s3c24xx_irq_resume,
-};
-
-#ifdef CONFIG_CPU_S3C2416
-static struct sleep_save s3c2416_irq_save[] = {
-	SAVE_ITEM(S3C2416_INTMSK2),
-};
-
-static int s3c2416_irq_suspend(void)
-{
-	s3c_pm_do_save(s3c2416_irq_save, ARRAY_SIZE(s3c2416_irq_save));
-
-	return 0;
-}
-
-static void s3c2416_irq_resume(void)
-{
-	s3c_pm_do_restore(s3c2416_irq_save, ARRAY_SIZE(s3c2416_irq_save));
-}
-
-struct syscore_ops s3c2416_irq_syscore_ops = {
-	.suspend	= s3c2416_irq_suspend,
-	.resume		= s3c2416_irq_resume,
-};
-#endif
diff --git a/arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c b/arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c
deleted file mode 100644
index 84cf86376ded..000000000000
--- a/arch/arm/mach-s3c/irq-s3c24xx-fiq-exports.c
+++ /dev/null
@@ -1,9 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <linux/stddef.h>
-#include <linux/export.h>
-#include <linux/spi/s3c24xx-fiq.h>
-
-EXPORT_SYMBOL(s3c24xx_spi_fiq_rx);
-EXPORT_SYMBOL(s3c24xx_spi_fiq_txrx);
-EXPORT_SYMBOL(s3c24xx_spi_fiq_tx);
diff --git a/arch/arm/mach-s3c/irq-s3c24xx-fiq.S b/arch/arm/mach-s3c/irq-s3c24xx-fiq.S
deleted file mode 100644
index 5d238d9a798e..000000000000
--- a/arch/arm/mach-s3c/irq-s3c24xx-fiq.S
+++ /dev/null
@@ -1,112 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/* linux/drivers/spi/spi_s3c24xx_fiq.S
- *
- * Copyright 2009 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX SPI - FIQ pseudo-DMA transfer code
-*/
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-#include "map.h"
-#include "regs-irq.h"
-
-#include <linux/spi/s3c24xx-fiq.h>
-
-#define S3C2410_SPTDAT           (0x10)
-#define S3C2410_SPRDAT           (0x14)
-
-	.text
-
-	@ entry to these routines is as follows, with the register names
-	@ defined in fiq.h so that they can be shared with the C files which
-	@ setup the calling registers.
-	@
-	@ fiq_rirq	The base of the IRQ registers to find S3C2410_SRCPND
-	@ fiq_rtmp	Temporary register to hold tx/rx data
-	@ fiq_rspi	The base of the SPI register block
-	@ fiq_rtx	The tx buffer pointer
-	@ fiq_rrx	The rx buffer pointer
-	@ fiq_rcount	The number of bytes to move
-
-	@ each entry starts with a word entry of how long it is
-	@ and an offset to the irq acknowledgment word
-
-ENTRY(s3c24xx_spi_fiq_rx)
-	.word	fiq_rx_end - fiq_rx_start
-	.word	fiq_rx_irq_ack - fiq_rx_start
-fiq_rx_start:
-	ldr	fiq_rtmp, fiq_rx_irq_ack
-	str	fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ]
-
-	ldrb	fiq_rtmp, [ fiq_rspi, #  S3C2410_SPRDAT ]
-	strb	fiq_rtmp, [ fiq_rrx ], #1
-
-	mov	fiq_rtmp, #0xff
-	strb	fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ]
-
-	subs	fiq_rcount, fiq_rcount, #1
-	subsne	pc, lr, #4		@@ return, still have work to do
-
-	@@ set IRQ controller so that next op will trigger IRQ
-	mov	fiq_rtmp, #0
-	str	fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD  - S3C24XX_VA_IRQ ]
-	subs	pc, lr, #4
-
-fiq_rx_irq_ack:
-	.word	0
-fiq_rx_end:
-
-ENTRY(s3c24xx_spi_fiq_txrx)
-	.word	fiq_txrx_end - fiq_txrx_start
-	.word	fiq_txrx_irq_ack - fiq_txrx_start
-fiq_txrx_start:
-
-	ldrb	fiq_rtmp, [ fiq_rspi, #  S3C2410_SPRDAT ]
-	strb	fiq_rtmp, [ fiq_rrx ], #1
-
-	ldr	fiq_rtmp, fiq_txrx_irq_ack
-	str	fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ]
-
-	ldrb	fiq_rtmp, [ fiq_rtx ], #1
-	strb	fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ]
-
-	subs	fiq_rcount, fiq_rcount, #1
-	subsne	pc, lr, #4		@@ return, still have work to do
-
-	mov	fiq_rtmp, #0
-	str	fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD  - S3C24XX_VA_IRQ ]
-	subs	pc, lr, #4
-
-fiq_txrx_irq_ack:
-	.word	0
-
-fiq_txrx_end:
-
-ENTRY(s3c24xx_spi_fiq_tx)
-	.word	fiq_tx_end - fiq_tx_start
-	.word	fiq_tx_irq_ack - fiq_tx_start
-fiq_tx_start:
-	ldrb	fiq_rtmp, [ fiq_rspi, #  S3C2410_SPRDAT ]
-
-	ldr	fiq_rtmp, fiq_tx_irq_ack
-	str	fiq_rtmp, [ fiq_rirq, # S3C2410_SRCPND - S3C24XX_VA_IRQ ]
-
-	ldrb	fiq_rtmp, [ fiq_rtx ], #1
-	strb	fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ]
-
-	subs	fiq_rcount, fiq_rcount, #1
-	subsne	pc, lr, #4		@@ return, still have work to do
-
-	mov	fiq_rtmp, #0
-	str	fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD  - S3C24XX_VA_IRQ ]
-	subs	pc, lr, #4
-
-fiq_tx_irq_ack:
-	.word	0
-
-fiq_tx_end:
-
-	.end
diff --git a/arch/arm/mach-s3c/irq-s3c24xx.c b/arch/arm/mach-s3c/irq-s3c24xx.c
deleted file mode 100644
index 088cc04b7431..000000000000
--- a/arch/arm/mach-s3c/irq-s3c24xx.c
+++ /dev/null
@@ -1,1352 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * S3C24XX IRQ handling
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- * Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de>
-*/
-
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/irqdomain.h>
-#include <linux/irqchip.h>
-#include <linux/irqchip/chained_irq.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-#include <linux/of_address.h>
-#include <linux/spi/s3c24xx.h>
-
-#include <asm/exception.h>
-#include <asm/mach/irq.h>
-
-#include "irqs.h"
-#include "regs-irq.h"
-#include "regs-gpio.h"
-
-#include "cpu.h"
-#include "regs-irqtype.h"
-#include "pm.h"
-#include "s3c24xx.h"
-
-#define S3C_IRQTYPE_NONE	0
-#define S3C_IRQTYPE_EINT	1
-#define S3C_IRQTYPE_EDGE	2
-#define S3C_IRQTYPE_LEVEL	3
-
-struct s3c_irq_data {
-	unsigned int type;
-	unsigned long offset;
-	unsigned long parent_irq;
-
-	/* data gets filled during init */
-	struct s3c_irq_intc *intc;
-	unsigned long sub_bits;
-	struct s3c_irq_intc *sub_intc;
-};
-
-/*
- * Structure holding the controller data
- * @reg_pending		register holding pending irqs
- * @reg_intpnd		special register intpnd in main intc
- * @reg_mask		mask register
- * @domain		irq_domain of the controller
- * @parent		parent controller for ext and sub irqs
- * @irqs		irq-data, always s3c_irq_data[32]
- */
-struct s3c_irq_intc {
-	void __iomem		*reg_pending;
-	void __iomem		*reg_intpnd;
-	void __iomem		*reg_mask;
-	struct irq_domain	*domain;
-	struct s3c_irq_intc	*parent;
-	struct s3c_irq_data	*irqs;
-};
-
-/*
- * Array holding pointers to the global controller structs
- * [0] ... main_intc
- * [1] ... sub_intc
- * [2] ... main_intc2 on s3c2416
- */
-static struct s3c_irq_intc *s3c_intc[3];
-
-static void s3c_irq_mask(struct irq_data *data)
-{
-	struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data);
-	struct s3c_irq_intc *intc = irq_data->intc;
-	struct s3c_irq_intc *parent_intc = intc->parent;
-	struct s3c_irq_data *parent_data;
-	unsigned long mask;
-	unsigned int irqno;
-
-	mask = readl_relaxed(intc->reg_mask);
-	mask |= (1UL << irq_data->offset);
-	writel_relaxed(mask, intc->reg_mask);
-
-	if (parent_intc) {
-		parent_data = &parent_intc->irqs[irq_data->parent_irq];
-
-		/* check to see if we need to mask the parent IRQ
-		 * The parent_irq is always in main_intc, so the hwirq
-		 * for find_mapping does not need an offset in any case.
-		 */
-		if ((mask & parent_data->sub_bits) == parent_data->sub_bits) {
-			irqno = irq_find_mapping(parent_intc->domain,
-					 irq_data->parent_irq);
-			s3c_irq_mask(irq_get_irq_data(irqno));
-		}
-	}
-}
-
-static void s3c_irq_unmask(struct irq_data *data)
-{
-	struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data);
-	struct s3c_irq_intc *intc = irq_data->intc;
-	struct s3c_irq_intc *parent_intc = intc->parent;
-	unsigned long mask;
-	unsigned int irqno;
-
-	mask = readl_relaxed(intc->reg_mask);
-	mask &= ~(1UL << irq_data->offset);
-	writel_relaxed(mask, intc->reg_mask);
-
-	if (parent_intc) {
-		irqno = irq_find_mapping(parent_intc->domain,
-					 irq_data->parent_irq);
-		s3c_irq_unmask(irq_get_irq_data(irqno));
-	}
-}
-
-static inline void s3c_irq_ack(struct irq_data *data)
-{
-	struct s3c_irq_data *irq_data = irq_data_get_irq_chip_data(data);
-	struct s3c_irq_intc *intc = irq_data->intc;
-	unsigned long bitval = 1UL << irq_data->offset;
-
-	writel_relaxed(bitval, intc->reg_pending);
-	if (intc->reg_intpnd)
-		writel_relaxed(bitval, intc->reg_intpnd);
-}
-
-static int s3c_irq_type(struct irq_data *data, unsigned int type)
-{
-	switch (type) {
-	case IRQ_TYPE_NONE:
-		break;
-	case IRQ_TYPE_EDGE_RISING:
-	case IRQ_TYPE_EDGE_FALLING:
-	case IRQ_TYPE_EDGE_BOTH:
-		irq_set_handler(data->irq, handle_edge_irq);
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-	case IRQ_TYPE_LEVEL_HIGH:
-		irq_set_handler(data->irq, handle_level_irq);
-		break;
-	default:
-		pr_err("No such irq type %d\n", type);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int s3c_irqext_type_set(void __iomem *gpcon_reg,
-			       void __iomem *extint_reg,
-			       unsigned long gpcon_offset,
-			       unsigned long extint_offset,
-			       unsigned int type)
-{
-	unsigned long newvalue = 0, value;
-
-	/* Set the GPIO to external interrupt mode */
-	value = readl_relaxed(gpcon_reg);
-	value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset);
-	writel_relaxed(value, gpcon_reg);
-
-	/* Set the external interrupt to pointed trigger type */
-	switch (type)
-	{
-		case IRQ_TYPE_NONE:
-			pr_warn("No edge setting!\n");
-			break;
-
-		case IRQ_TYPE_EDGE_RISING:
-			newvalue = S3C2410_EXTINT_RISEEDGE;
-			break;
-
-		case IRQ_TYPE_EDGE_FALLING:
-			newvalue = S3C2410_EXTINT_FALLEDGE;
-			break;
-
-		case IRQ_TYPE_EDGE_BOTH:
-			newvalue = S3C2410_EXTINT_BOTHEDGE;
-			break;
-
-		case IRQ_TYPE_LEVEL_LOW:
-			newvalue = S3C2410_EXTINT_LOWLEV;
-			break;
-
-		case IRQ_TYPE_LEVEL_HIGH:
-			newvalue = S3C2410_EXTINT_HILEV;
-			break;
-
-		default:
-			pr_err("No such irq type %d\n", type);
-			return -EINVAL;
-	}
-
-	value = readl_relaxed(extint_reg);
-	value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset);
-	writel_relaxed(value, extint_reg);
-
-	return 0;
-}
-
-static int s3c_irqext_type(struct irq_data *data, unsigned int type)
-{
-	void __iomem *extint_reg;
-	void __iomem *gpcon_reg;
-	unsigned long gpcon_offset, extint_offset;
-
-	if ((data->hwirq >= 4) && (data->hwirq <= 7)) {
-		gpcon_reg = S3C2410_GPFCON;
-		extint_reg = S3C24XX_EXTINT0;
-		gpcon_offset = (data->hwirq) * 2;
-		extint_offset = (data->hwirq) * 4;
-	} else if ((data->hwirq >= 8) && (data->hwirq <= 15)) {
-		gpcon_reg = S3C2410_GPGCON;
-		extint_reg = S3C24XX_EXTINT1;
-		gpcon_offset = (data->hwirq - 8) * 2;
-		extint_offset = (data->hwirq - 8) * 4;
-	} else if ((data->hwirq >= 16) && (data->hwirq <= 23)) {
-		gpcon_reg = S3C2410_GPGCON;
-		extint_reg = S3C24XX_EXTINT2;
-		gpcon_offset = (data->hwirq - 8) * 2;
-		extint_offset = (data->hwirq - 16) * 4;
-	} else {
-		return -EINVAL;
-	}
-
-	return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset,
-				   extint_offset, type);
-}
-
-static int s3c_irqext0_type(struct irq_data *data, unsigned int type)
-{
-	void __iomem *extint_reg;
-	void __iomem *gpcon_reg;
-	unsigned long gpcon_offset, extint_offset;
-
-	if (data->hwirq <= 3) {
-		gpcon_reg = S3C2410_GPFCON;
-		extint_reg = S3C24XX_EXTINT0;
-		gpcon_offset = (data->hwirq) * 2;
-		extint_offset = (data->hwirq) * 4;
-	} else {
-		return -EINVAL;
-	}
-
-	return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset,
-				   extint_offset, type);
-}
-
-static struct irq_chip s3c_irq_chip = {
-	.name		= "s3c",
-	.irq_ack	= s3c_irq_ack,
-	.irq_mask	= s3c_irq_mask,
-	.irq_unmask	= s3c_irq_unmask,
-	.irq_set_type	= s3c_irq_type,
-	.irq_set_wake	= s3c_irq_wake
-};
-
-static struct irq_chip s3c_irq_level_chip = {
-	.name		= "s3c-level",
-	.irq_mask	= s3c_irq_mask,
-	.irq_unmask	= s3c_irq_unmask,
-	.irq_ack	= s3c_irq_ack,
-	.irq_set_type	= s3c_irq_type,
-};
-
-static struct irq_chip s3c_irqext_chip = {
-	.name		= "s3c-ext",
-	.irq_mask	= s3c_irq_mask,
-	.irq_unmask	= s3c_irq_unmask,
-	.irq_ack	= s3c_irq_ack,
-	.irq_set_type	= s3c_irqext_type,
-	.irq_set_wake	= s3c_irqext_wake
-};
-
-static struct irq_chip s3c_irq_eint0t4 = {
-	.name		= "s3c-ext0",
-	.irq_ack	= s3c_irq_ack,
-	.irq_mask	= s3c_irq_mask,
-	.irq_unmask	= s3c_irq_unmask,
-	.irq_set_wake	= s3c_irq_wake,
-	.irq_set_type	= s3c_irqext0_type,
-};
-
-static void s3c_irq_demux(struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-	struct s3c_irq_data *irq_data = irq_desc_get_chip_data(desc);
-	struct s3c_irq_intc *intc = irq_data->intc;
-	struct s3c_irq_intc *sub_intc = irq_data->sub_intc;
-	unsigned int n, offset;
-	unsigned long src, msk;
-
-	/* we're using individual domains for the non-dt case
-	 * and one big domain for the dt case where the subintc
-	 * starts at hwirq number 32.
-	 */
-	offset = irq_domain_get_of_node(intc->domain) ? 32 : 0;
-
-	chained_irq_enter(chip, desc);
-
-	src = readl_relaxed(sub_intc->reg_pending);
-	msk = readl_relaxed(sub_intc->reg_mask);
-
-	src &= ~msk;
-	src &= irq_data->sub_bits;
-
-	while (src) {
-		n = __ffs(src);
-		src &= ~(1 << n);
-		generic_handle_domain_irq(sub_intc->domain, offset + n);
-	}
-
-	chained_irq_exit(chip, desc);
-}
-
-static inline int s3c24xx_handle_intc(struct s3c_irq_intc *intc,
-				      struct pt_regs *regs, int intc_offset)
-{
-	int pnd;
-	int offset;
-
-	pnd = readl_relaxed(intc->reg_intpnd);
-	if (!pnd)
-		return false;
-
-	/* non-dt machines use individual domains */
-	if (!irq_domain_get_of_node(intc->domain))
-		intc_offset = 0;
-
-	/* We have a problem that the INTOFFSET register does not always
-	 * show one interrupt. Occasionally we get two interrupts through
-	 * the prioritiser, and this causes the INTOFFSET register to show
-	 * what looks like the logical-or of the two interrupt numbers.
-	 *
-	 * Thanks to Klaus, Shannon, et al for helping to debug this problem
-	 */
-	offset = readl_relaxed(intc->reg_intpnd + 4);
-
-	/* Find the bit manually, when the offset is wrong.
-	 * The pending register only ever contains the one bit of the next
-	 * interrupt to handle.
-	 */
-	if (!(pnd & (1 << offset)))
-		offset =  __ffs(pnd);
-
-	generic_handle_domain_irq(intc->domain, intc_offset + offset);
-	return true;
-}
-
-static asmlinkage void __exception_irq_entry s3c24xx_handle_irq(struct pt_regs *regs)
-{
-	do {
-		/*
-		 * For platform based machines, neither ERR nor NULL can happen here.
-		 * The s3c24xx_handle_irq() will be set as IRQ handler iff this succeeds:
-		 *
-		 *    s3c_intc[0] = s3c24xx_init_intc()
-		 *
-		 * If this fails, the next calls to s3c24xx_init_intc() won't be executed.
-		 *
-		 * For DT machine, s3c_init_intc_of() could set the IRQ handler without
-		 * setting s3c_intc[0] only if it was called with num_ctrl=0. There is no
-		 * such code path, so again the s3c_intc[0] will have a valid pointer if
-		 * set_handle_irq() is called.
-		 *
-		 * Therefore in s3c24xx_handle_irq(), the s3c_intc[0] is always something.
-		 */
-		if (s3c24xx_handle_intc(s3c_intc[0], regs, 0))
-			continue;
-
-		if (!IS_ERR_OR_NULL(s3c_intc[2]))
-			if (s3c24xx_handle_intc(s3c_intc[2], regs, 64))
-				continue;
-
-		break;
-	} while (1);
-}
-
-#ifdef CONFIG_FIQ
-/**
- * s3c24xx_set_fiq - set the FIQ routing
- * @irq: IRQ number to route to FIQ on processor.
- * @ack_ptr: pointer to a location for storing the bit mask
- * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing.
- *
- * Change the state of the IRQ to FIQ routing depending on @irq and @on. If
- * @on is true, the @irq is checked to see if it can be routed and the
- * interrupt controller updated to route the IRQ. If @on is false, the FIQ
- * routing is cleared, regardless of which @irq is specified.
- *
- * returns the mask value for the register.
- */
-int s3c24xx_set_fiq(unsigned int irq, u32 *ack_ptr, bool on)
-{
-	u32 intmod;
-	unsigned offs;
-
-	if (on) {
-		offs = irq - FIQ_START;
-		if (offs > 31)
-			return 0;
-
-		intmod = 1 << offs;
-	} else {
-		intmod = 0;
-	}
-
-	if (ack_ptr)
-		*ack_ptr = intmod;
-	writel_relaxed(intmod, S3C2410_INTMOD);
-
-	return intmod;
-}
-
-EXPORT_SYMBOL_GPL(s3c24xx_set_fiq);
-#endif
-
-static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq,
-							irq_hw_number_t hw)
-{
-	struct s3c_irq_intc *intc = h->host_data;
-	struct s3c_irq_data *irq_data = &intc->irqs[hw];
-	struct s3c_irq_intc *parent_intc;
-	struct s3c_irq_data *parent_irq_data;
-	unsigned int irqno;
-
-	/* attach controller pointer to irq_data */
-	irq_data->intc = intc;
-	irq_data->offset = hw;
-
-	parent_intc = intc->parent;
-
-	/* set handler and flags */
-	switch (irq_data->type) {
-	case S3C_IRQTYPE_NONE:
-		return 0;
-	case S3C_IRQTYPE_EINT:
-		/* On the S3C2412, the EINT0to3 have a parent irq
-		 * but need the s3c_irq_eint0t4 chip
-		 */
-		if (parent_intc && (!soc_is_s3c2412() || hw >= 4))
-			irq_set_chip_and_handler(virq, &s3c_irqext_chip,
-						 handle_edge_irq);
-		else
-			irq_set_chip_and_handler(virq, &s3c_irq_eint0t4,
-						 handle_edge_irq);
-		break;
-	case S3C_IRQTYPE_EDGE:
-		if (parent_intc || intc->reg_pending == S3C2416_SRCPND2)
-			irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
-						 handle_edge_irq);
-		else
-			irq_set_chip_and_handler(virq, &s3c_irq_chip,
-						 handle_edge_irq);
-		break;
-	case S3C_IRQTYPE_LEVEL:
-		if (parent_intc)
-			irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
-						 handle_level_irq);
-		else
-			irq_set_chip_and_handler(virq, &s3c_irq_chip,
-						 handle_level_irq);
-		break;
-	default:
-		pr_err("irq-s3c24xx: unsupported irqtype %d\n", irq_data->type);
-		return -EINVAL;
-	}
-
-	irq_set_chip_data(virq, irq_data);
-
-	if (parent_intc && irq_data->type != S3C_IRQTYPE_NONE) {
-		if (irq_data->parent_irq > 31) {
-			pr_err("irq-s3c24xx: parent irq %lu is out of range\n",
-			       irq_data->parent_irq);
-			return -EINVAL;
-		}
-
-		parent_irq_data = &parent_intc->irqs[irq_data->parent_irq];
-		parent_irq_data->sub_intc = intc;
-		parent_irq_data->sub_bits |= (1UL << hw);
-
-		/* attach the demuxer to the parent irq */
-		irqno = irq_find_mapping(parent_intc->domain,
-					 irq_data->parent_irq);
-		if (!irqno) {
-			pr_err("irq-s3c24xx: could not find mapping for parent irq %lu\n",
-			       irq_data->parent_irq);
-			return -EINVAL;
-		}
-		irq_set_chained_handler(irqno, s3c_irq_demux);
-	}
-
-	return 0;
-}
-
-static const struct irq_domain_ops s3c24xx_irq_ops = {
-	.map = s3c24xx_irq_map,
-	.xlate = irq_domain_xlate_twocell,
-};
-
-static void s3c24xx_clear_intc(struct s3c_irq_intc *intc)
-{
-	void __iomem *reg_source;
-	unsigned long pend;
-	unsigned long last;
-	int i;
-
-	/* if intpnd is set, read the next pending irq from there */
-	reg_source = intc->reg_intpnd ? intc->reg_intpnd : intc->reg_pending;
-
-	last = 0;
-	for (i = 0; i < 4; i++) {
-		pend = readl_relaxed(reg_source);
-
-		if (pend == 0 || pend == last)
-			break;
-
-		writel_relaxed(pend, intc->reg_pending);
-		if (intc->reg_intpnd)
-			writel_relaxed(pend, intc->reg_intpnd);
-
-		pr_info("irq: clearing pending status %08x\n", (int)pend);
-		last = pend;
-	}
-}
-
-static struct s3c_irq_intc * __init s3c24xx_init_intc(struct device_node *np,
-				       struct s3c_irq_data *irq_data,
-				       struct s3c_irq_intc *parent,
-				       unsigned long address)
-{
-	struct s3c_irq_intc *intc;
-	void __iomem *base = (void *)0xf6000000; /* static mapping */
-	int irq_num;
-	int irq_start;
-	int ret;
-
-	intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL);
-	if (!intc)
-		return ERR_PTR(-ENOMEM);
-
-	intc->irqs = irq_data;
-
-	if (parent)
-		intc->parent = parent;
-
-	/* select the correct data for the controller.
-	 * Need to hard code the irq num start and offset
-	 * to preserve the static mapping for now
-	 */
-	switch (address) {
-	case 0x4a000000:
-		pr_debug("irq: found main intc\n");
-		intc->reg_pending = base;
-		intc->reg_mask = base + 0x08;
-		intc->reg_intpnd = base + 0x10;
-		irq_num = 32;
-		irq_start = S3C2410_IRQ(0);
-		break;
-	case 0x4a000018:
-		pr_debug("irq: found subintc\n");
-		intc->reg_pending = base + 0x18;
-		intc->reg_mask = base + 0x1c;
-		irq_num = 29;
-		irq_start = S3C2410_IRQSUB(0);
-		break;
-	case 0x4a000040:
-		pr_debug("irq: found intc2\n");
-		intc->reg_pending = base + 0x40;
-		intc->reg_mask = base + 0x48;
-		intc->reg_intpnd = base + 0x50;
-		irq_num = 8;
-		irq_start = S3C2416_IRQ(0);
-		break;
-	case 0x560000a4:
-		pr_debug("irq: found eintc\n");
-		base = (void *)0xfd000000;
-
-		intc->reg_mask = base + 0xa4;
-		intc->reg_pending = base + 0xa8;
-		irq_num = 24;
-		irq_start = S3C2410_IRQ(32);
-		break;
-	default:
-		pr_err("irq: unsupported controller address\n");
-		ret = -EINVAL;
-		goto err;
-	}
-
-	/* now that all the data is complete, init the irq-domain */
-	s3c24xx_clear_intc(intc);
-	intc->domain = irq_domain_add_legacy(np, irq_num, irq_start,
-					     0, &s3c24xx_irq_ops,
-					     intc);
-	if (!intc->domain) {
-		pr_err("irq: could not create irq-domain\n");
-		ret = -EINVAL;
-		goto err;
-	}
-
-	set_handle_irq(s3c24xx_handle_irq);
-
-	return intc;
-
-err:
-	kfree(intc);
-	return ERR_PTR(ret);
-}
-
-static struct s3c_irq_data __maybe_unused init_eint[32] = {
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */
-};
-
-#ifdef CONFIG_CPU_S3C2410
-static struct s3c_irq_data init_s3c2410base[32] = {
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* WDT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* LCD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-static struct s3c_irq_data init_s3c2410subint[32] = {
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
-};
-
-void __init s3c2410_init_irq(void)
-{
-#ifdef CONFIG_FIQ
-	init_FIQ(FIQ_START);
-#endif
-
-	s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2410base[0], NULL,
-					0x4a000000);
-	if (IS_ERR(s3c_intc[0])) {
-		pr_err("irq: could not create main interrupt controller\n");
-		return;
-	}
-
-	s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2410subint[0],
-					s3c_intc[0], 0x4a000018);
-	s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
-}
-#endif
-
-#ifdef CONFIG_CPU_S3C2412
-static struct s3c_irq_data init_s3c2412base[32] = {
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT0 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT1 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT2 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT3 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* WDT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* LCD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* SDI/CF */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-static struct s3c_irq_data init_s3c2412eint[32] = {
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 0 }, /* EINT0 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 1 }, /* EINT1 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 2 }, /* EINT2 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 3 }, /* EINT3 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */
-	{ .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */
-};
-
-static struct s3c_irq_data init_s3c2412subint[32] = {
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
-	{ .type = S3C_IRQTYPE_NONE, },
-	{ .type = S3C_IRQTYPE_NONE, },
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* SDI */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 21 }, /* CF */
-};
-
-void __init s3c2412_init_irq(void)
-{
-	pr_info("S3C2412: IRQ Support\n");
-
-#ifdef CONFIG_FIQ
-	init_FIQ(FIQ_START);
-#endif
-
-	s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2412base[0], NULL,
-					0x4a000000);
-	if (IS_ERR(s3c_intc[0])) {
-		pr_err("irq: could not create main interrupt controller\n");
-		return;
-	}
-
-	s3c24xx_init_intc(NULL, &init_s3c2412eint[0], s3c_intc[0], 0x560000a4);
-	s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2412subint[0],
-					s3c_intc[0], 0x4a000018);
-}
-#endif
-
-#ifdef CONFIG_CPU_S3C2416
-static struct s3c_irq_data init_s3c2416base[32] = {
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* LCD */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* DMA */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */
-	{ .type = S3C_IRQTYPE_NONE, }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* NAND */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
-	{ .type = S3C_IRQTYPE_NONE, },
-	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-static struct s3c_irq_data init_s3c2416subint[32] = {
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
-};
-
-static struct s3c_irq_data init_s3c2416_second[32] = {
-	{ .type = S3C_IRQTYPE_EDGE }, /* 2D */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE }, /* PCM0 */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_EDGE }, /* I2S0 */
-};
-
-void __init s3c2416_init_irq(void)
-{
-	pr_info("S3C2416: IRQ Support\n");
-
-#ifdef CONFIG_FIQ
-	init_FIQ(FIQ_START);
-#endif
-
-	s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL,
-					0x4a000000);
-	if (IS_ERR(s3c_intc[0])) {
-		pr_err("irq: could not create main interrupt controller\n");
-		return;
-	}
-
-	s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
-	s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2416subint[0],
-					s3c_intc[0], 0x4a000018);
-
-	s3c_intc[2] = s3c24xx_init_intc(NULL, &init_s3c2416_second[0],
-					NULL, 0x4a000040);
-}
-
-#endif
-
-#ifdef CONFIG_CPU_S3C2440
-static struct s3c_irq_data init_s3c2440base[32] = {
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* LCD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-static struct s3c_irq_data init_s3c2440subint[32] = {
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
-};
-
-void __init s3c2440_init_irq(void)
-{
-	pr_info("S3C2440: IRQ Support\n");
-
-#ifdef CONFIG_FIQ
-	init_FIQ(FIQ_START);
-#endif
-
-	s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2440base[0], NULL,
-					0x4a000000);
-	if (IS_ERR(s3c_intc[0])) {
-		pr_err("irq: could not create main interrupt controller\n");
-		return;
-	}
-
-	s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
-	s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2440subint[0],
-					s3c_intc[0], 0x4a000018);
-}
-#endif
-
-#ifdef CONFIG_CPU_S3C2442
-static struct s3c_irq_data init_s3c2442base[32] = {
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* WDT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* LCD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* NFCON */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-static struct s3c_irq_data init_s3c2442subint[32] = {
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */
-};
-
-void __init s3c2442_init_irq(void)
-{
-	pr_info("S3C2442: IRQ Support\n");
-
-#ifdef CONFIG_FIQ
-	init_FIQ(FIQ_START);
-#endif
-
-	s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2442base[0], NULL,
-					0x4a000000);
-	if (IS_ERR(s3c_intc[0])) {
-		pr_err("irq: could not create main interrupt controller\n");
-		return;
-	}
-
-	s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
-	s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2442subint[0],
-					s3c_intc[0], 0x4a000018);
-}
-#endif
-
-#ifdef CONFIG_CPU_S3C2443
-static struct s3c_irq_data init_s3c2443base[32] = {
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
-	{ .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TICK */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* LCD */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* DMA */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* CFON */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* NAND */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBD */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* USBH */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* IIC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
-	{ .type = S3C_IRQTYPE_EDGE, }, /* RTC */
-	{ .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
-};
-
-
-static struct s3c_irq_data init_s3c2443subint[32] = {
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
-	{ .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */
-	{ .type = S3C_IRQTYPE_NONE }, /* reserved */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD1 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
-	{ .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
-};
-
-void __init s3c2443_init_irq(void)
-{
-	pr_info("S3C2443: IRQ Support\n");
-
-#ifdef CONFIG_FIQ
-	init_FIQ(FIQ_START);
-#endif
-
-	s3c_intc[0] = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL,
-					0x4a000000);
-	if (IS_ERR(s3c_intc[0])) {
-		pr_err("irq: could not create main interrupt controller\n");
-		return;
-	}
-
-	s3c24xx_init_intc(NULL, &init_eint[0], s3c_intc[0], 0x560000a4);
-	s3c_intc[1] = s3c24xx_init_intc(NULL, &init_s3c2443subint[0],
-					s3c_intc[0], 0x4a000018);
-}
-#endif
-
-#ifdef CONFIG_OF
-static int s3c24xx_irq_map_of(struct irq_domain *h, unsigned int virq,
-							irq_hw_number_t hw)
-{
-	unsigned int ctrl_num = hw / 32;
-	unsigned int intc_hw = hw % 32;
-	struct s3c_irq_intc *intc = s3c_intc[ctrl_num];
-	struct s3c_irq_intc *parent_intc = intc->parent;
-	struct s3c_irq_data *irq_data = &intc->irqs[intc_hw];
-
-	/* attach controller pointer to irq_data */
-	irq_data->intc = intc;
-	irq_data->offset = intc_hw;
-
-	if (!parent_intc)
-		irq_set_chip_and_handler(virq, &s3c_irq_chip, handle_edge_irq);
-	else
-		irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
-					 handle_edge_irq);
-
-	irq_set_chip_data(virq, irq_data);
-
-	return 0;
-}
-
-/* Translate our of irq notation
- * format: <ctrl_num ctrl_irq parent_irq type>
- */
-static int s3c24xx_irq_xlate_of(struct irq_domain *d, struct device_node *n,
-			const u32 *intspec, unsigned int intsize,
-			irq_hw_number_t *out_hwirq, unsigned int *out_type)
-{
-	struct s3c_irq_intc *intc;
-	struct s3c_irq_intc *parent_intc;
-	struct s3c_irq_data *irq_data;
-	struct s3c_irq_data *parent_irq_data;
-	int irqno;
-
-	if (WARN_ON(intsize < 4))
-		return -EINVAL;
-
-	if (intspec[0] > 2 || !s3c_intc[intspec[0]]) {
-		pr_err("controller number %d invalid\n", intspec[0]);
-		return -EINVAL;
-	}
-	intc = s3c_intc[intspec[0]];
-
-	*out_hwirq = intspec[0] * 32 + intspec[2];
-	*out_type = intspec[3] & IRQ_TYPE_SENSE_MASK;
-
-	parent_intc = intc->parent;
-	if (parent_intc) {
-		irq_data = &intc->irqs[intspec[2]];
-		irq_data->parent_irq = intspec[1];
-		parent_irq_data = &parent_intc->irqs[irq_data->parent_irq];
-		parent_irq_data->sub_intc = intc;
-		parent_irq_data->sub_bits |= (1UL << intspec[2]);
-
-		/* parent_intc is always s3c_intc[0], so no offset */
-		irqno = irq_create_mapping(parent_intc->domain, intspec[1]);
-		if (irqno < 0) {
-			pr_err("irq: could not map parent interrupt\n");
-			return irqno;
-		}
-
-		irq_set_chained_handler(irqno, s3c_irq_demux);
-	}
-
-	return 0;
-}
-
-static const struct irq_domain_ops s3c24xx_irq_ops_of = {
-	.map = s3c24xx_irq_map_of,
-	.xlate = s3c24xx_irq_xlate_of,
-};
-
-struct s3c24xx_irq_of_ctrl {
-	char			*name;
-	unsigned long		offset;
-	struct s3c_irq_intc	**handle;
-	struct s3c_irq_intc	**parent;
-	struct irq_domain_ops	*ops;
-};
-
-static int __init s3c_init_intc_of(struct device_node *np,
-			struct device_node *interrupt_parent,
-			struct s3c24xx_irq_of_ctrl *s3c_ctrl, int num_ctrl)
-{
-	struct s3c_irq_intc *intc;
-	struct s3c24xx_irq_of_ctrl *ctrl;
-	struct irq_domain *domain;
-	void __iomem *reg_base;
-	int i;
-
-	reg_base = of_iomap(np, 0);
-	if (!reg_base) {
-		pr_err("irq-s3c24xx: could not map irq registers\n");
-		return -EINVAL;
-	}
-
-	domain = irq_domain_add_linear(np, num_ctrl * 32,
-						     &s3c24xx_irq_ops_of, NULL);
-	if (!domain) {
-		pr_err("irq: could not create irq-domain\n");
-		return -EINVAL;
-	}
-
-	for (i = 0; i < num_ctrl; i++) {
-		ctrl = &s3c_ctrl[i];
-
-		pr_debug("irq: found controller %s\n", ctrl->name);
-
-		intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL);
-		if (!intc)
-			return -ENOMEM;
-
-		intc->domain = domain;
-		intc->irqs = kcalloc(32, sizeof(struct s3c_irq_data),
-				     GFP_KERNEL);
-		if (!intc->irqs) {
-			kfree(intc);
-			return -ENOMEM;
-		}
-
-		if (ctrl->parent) {
-			intc->reg_pending = reg_base + ctrl->offset;
-			intc->reg_mask = reg_base + ctrl->offset + 0x4;
-
-			if (*(ctrl->parent)) {
-				intc->parent = *(ctrl->parent);
-			} else {
-				pr_warn("irq: parent of %s missing\n",
-					ctrl->name);
-				kfree(intc->irqs);
-				kfree(intc);
-				continue;
-			}
-		} else {
-			intc->reg_pending = reg_base + ctrl->offset;
-			intc->reg_mask = reg_base + ctrl->offset + 0x08;
-			intc->reg_intpnd = reg_base + ctrl->offset + 0x10;
-		}
-
-		s3c24xx_clear_intc(intc);
-		s3c_intc[i] = intc;
-	}
-
-	set_handle_irq(s3c24xx_handle_irq);
-
-	return 0;
-}
-
-static struct s3c24xx_irq_of_ctrl s3c2410_ctrl[] = {
-	{
-		.name = "intc",
-		.offset = 0,
-	}, {
-		.name = "subintc",
-		.offset = 0x18,
-		.parent = &s3c_intc[0],
-	}
-};
-
-static int __init s3c2410_init_intc_of(struct device_node *np,
-			struct device_node *interrupt_parent)
-{
-	return s3c_init_intc_of(np, interrupt_parent,
-				s3c2410_ctrl, ARRAY_SIZE(s3c2410_ctrl));
-}
-IRQCHIP_DECLARE(s3c2410_irq, "samsung,s3c2410-irq", s3c2410_init_intc_of);
-
-static struct s3c24xx_irq_of_ctrl s3c2416_ctrl[] = {
-	{
-		.name = "intc",
-		.offset = 0,
-	}, {
-		.name = "subintc",
-		.offset = 0x18,
-		.parent = &s3c_intc[0],
-	}, {
-		.name = "intc2",
-		.offset = 0x40,
-	}
-};
-
-static int __init s3c2416_init_intc_of(struct device_node *np,
-			struct device_node *interrupt_parent)
-{
-	return s3c_init_intc_of(np, interrupt_parent,
-				s3c2416_ctrl, ARRAY_SIZE(s3c2416_ctrl));
-}
-IRQCHIP_DECLARE(s3c2416_irq, "samsung,s3c2416-irq", s3c2416_init_intc_of);
-#endif
diff --git a/arch/arm/mach-s3c/irqs-s3c24xx.h b/arch/arm/mach-s3c/irqs-s3c24xx.h
deleted file mode 100644
index fecbf7e440c6..000000000000
--- a/arch/arm/mach-s3c/irqs-s3c24xx.h
+++ /dev/null
@@ -1,219 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2003-2005 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- */
-
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
-
-/* we keep the first set of CPU IRQs out of the range of
- * the ISA space, so that the PC104 has them to itself
- * and we don't end up having to do horrible things to the
- * standard ISA drivers....
- */
-
-#define S3C2410_CPUIRQ_OFFSET	 (16)
-
-#define S3C2410_IRQ(x) ((x) + S3C2410_CPUIRQ_OFFSET)
-
-/* main cpu interrupts */
-#define IRQ_EINT0      S3C2410_IRQ(0)	    /* 16 */
-#define IRQ_EINT1      S3C2410_IRQ(1)
-#define IRQ_EINT2      S3C2410_IRQ(2)
-#define IRQ_EINT3      S3C2410_IRQ(3)
-#define IRQ_EINT4t7    S3C2410_IRQ(4)	    /* 20 */
-#define IRQ_EINT8t23   S3C2410_IRQ(5)
-#define IRQ_RESERVED6  S3C2410_IRQ(6)	    /* for s3c2410 */
-#define IRQ_CAM        S3C2410_IRQ(6)	    /* for s3c2440,s3c2443 */
-#define IRQ_BATT_FLT   S3C2410_IRQ(7)
-#define IRQ_TICK       S3C2410_IRQ(8)	    /* 24 */
-#define IRQ_WDT	       S3C2410_IRQ(9)	    /* WDT/AC97 for s3c2443 */
-#define IRQ_TIMER0     S3C2410_IRQ(10)
-#define IRQ_TIMER1     S3C2410_IRQ(11)
-#define IRQ_TIMER2     S3C2410_IRQ(12)
-#define IRQ_TIMER3     S3C2410_IRQ(13)
-#define IRQ_TIMER4     S3C2410_IRQ(14)
-#define IRQ_UART2      S3C2410_IRQ(15)
-#define IRQ_LCD	       S3C2410_IRQ(16)	    /* 32 */
-#define IRQ_DMA0       S3C2410_IRQ(17)	    /* IRQ_DMA for s3c2443 */
-#define IRQ_DMA1       S3C2410_IRQ(18)
-#define IRQ_DMA2       S3C2410_IRQ(19)
-#define IRQ_DMA3       S3C2410_IRQ(20)
-#define IRQ_SDI	       S3C2410_IRQ(21)
-#define IRQ_SPI0       S3C2410_IRQ(22)
-#define IRQ_UART1      S3C2410_IRQ(23)
-#define IRQ_RESERVED24 S3C2410_IRQ(24)	    /* 40 */
-#define IRQ_NFCON      S3C2410_IRQ(24)	    /* for s3c2440 */
-#define IRQ_USBD       S3C2410_IRQ(25)
-#define IRQ_USBH       S3C2410_IRQ(26)
-#define IRQ_IIC	       S3C2410_IRQ(27)
-#define IRQ_UART0      S3C2410_IRQ(28)	    /* 44 */
-#define IRQ_SPI1       S3C2410_IRQ(29)
-#define IRQ_RTC	       S3C2410_IRQ(30)
-#define IRQ_ADCPARENT  S3C2410_IRQ(31)
-
-/* interrupts generated from the external interrupts sources */
-#define IRQ_EINT0_2412 S3C2410_IRQ(32)
-#define IRQ_EINT1_2412 S3C2410_IRQ(33)
-#define IRQ_EINT2_2412 S3C2410_IRQ(34)
-#define IRQ_EINT3_2412 S3C2410_IRQ(35)
-#define IRQ_EINT4      S3C2410_IRQ(36)	   /* 52 */
-#define IRQ_EINT5      S3C2410_IRQ(37)
-#define IRQ_EINT6      S3C2410_IRQ(38)
-#define IRQ_EINT7      S3C2410_IRQ(39)
-#define IRQ_EINT8      S3C2410_IRQ(40)
-#define IRQ_EINT9      S3C2410_IRQ(41)
-#define IRQ_EINT10     S3C2410_IRQ(42)
-#define IRQ_EINT11     S3C2410_IRQ(43)
-#define IRQ_EINT12     S3C2410_IRQ(44)
-#define IRQ_EINT13     S3C2410_IRQ(45)
-#define IRQ_EINT14     S3C2410_IRQ(46)
-#define IRQ_EINT15     S3C2410_IRQ(47)
-#define IRQ_EINT16     S3C2410_IRQ(48)
-#define IRQ_EINT17     S3C2410_IRQ(49)
-#define IRQ_EINT18     S3C2410_IRQ(50)
-#define IRQ_EINT19     S3C2410_IRQ(51)
-#define IRQ_EINT20     S3C2410_IRQ(52)	   /* 68 */
-#define IRQ_EINT21     S3C2410_IRQ(53)
-#define IRQ_EINT22     S3C2410_IRQ(54)
-#define IRQ_EINT23     S3C2410_IRQ(55)
-
-#define IRQ_EINT_BIT(x)	((x) - IRQ_EINT4 + 4)
-#define IRQ_EINT(x)    (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x)))
-
-#define IRQ_LCD_FIFO   S3C2410_IRQ(56)
-#define IRQ_LCD_FRAME  S3C2410_IRQ(57)
-
-/* IRQs for the interal UARTs, and ADC
- * these need to be ordered in number of appearance in the
- * SUBSRC mask register
-*/
-
-#define S3C2410_IRQSUB(x)	S3C2410_IRQ((x)+58)
-
-#define IRQ_S3CUART_RX0		S3C2410_IRQSUB(0)	/* 74 */
-#define IRQ_S3CUART_TX0		S3C2410_IRQSUB(1)
-#define IRQ_S3CUART_ERR0	S3C2410_IRQSUB(2)
-
-#define IRQ_S3CUART_RX1		S3C2410_IRQSUB(3)	/* 77 */
-#define IRQ_S3CUART_TX1		S3C2410_IRQSUB(4)
-#define IRQ_S3CUART_ERR1	S3C2410_IRQSUB(5)
-
-#define IRQ_S3CUART_RX2		S3C2410_IRQSUB(6)	/* 80 */
-#define IRQ_S3CUART_TX2		S3C2410_IRQSUB(7)
-#define IRQ_S3CUART_ERR2	S3C2410_IRQSUB(8)
-
-#define IRQ_TC			S3C2410_IRQSUB(9)
-#define IRQ_ADC			S3C2410_IRQSUB(10)
-
-#define NR_IRQS_S3C2410		(S3C2410_IRQSUB(10) + 1)
-
-/* extra irqs for s3c2412 */
-
-#define IRQ_S3C2412_CFSDI	S3C2410_IRQ(21)
-
-#define IRQ_S3C2412_SDI		S3C2410_IRQSUB(13)
-#define IRQ_S3C2412_CF		S3C2410_IRQSUB(14)
-
-#define NR_IRQS_S3C2412		(S3C2410_IRQSUB(14) + 1)
-
-#define IRQ_S3C2416_EINT8t15	S3C2410_IRQ(5)
-#define IRQ_S3C2416_DMA		S3C2410_IRQ(17)
-#define IRQ_S3C2416_UART3	S3C2410_IRQ(18)
-#define IRQ_S3C2416_SDI1	S3C2410_IRQ(20)
-#define IRQ_S3C2416_SDI0	S3C2410_IRQ(21)
-
-#define IRQ_S3C2416_LCD2	S3C2410_IRQSUB(15)
-#define IRQ_S3C2416_LCD3	S3C2410_IRQSUB(16)
-#define IRQ_S3C2416_LCD4	S3C2410_IRQSUB(17)
-#define IRQ_S3C2416_DMA0	S3C2410_IRQSUB(18)
-#define IRQ_S3C2416_DMA1	S3C2410_IRQSUB(19)
-#define IRQ_S3C2416_DMA2	S3C2410_IRQSUB(20)
-#define IRQ_S3C2416_DMA3	S3C2410_IRQSUB(21)
-#define IRQ_S3C2416_DMA4	S3C2410_IRQSUB(22)
-#define IRQ_S3C2416_DMA5	S3C2410_IRQSUB(23)
-#define IRQ_S32416_WDT		S3C2410_IRQSUB(27)
-#define IRQ_S32416_AC97		S3C2410_IRQSUB(28)
-
-/* second interrupt-register of s3c2416/s3c2450 */
-
-#define S3C2416_IRQ(x)		S3C2410_IRQ((x) + 58 + 29)
-#define IRQ_S3C2416_2D		S3C2416_IRQ(0)
-#define IRQ_S3C2416_IIC1	S3C2416_IRQ(1)
-#define IRQ_S3C2416_RESERVED2	S3C2416_IRQ(2)
-#define IRQ_S3C2416_RESERVED3	S3C2416_IRQ(3)
-#define IRQ_S3C2416_PCM0	S3C2416_IRQ(4)
-#define IRQ_S3C2416_PCM1	S3C2416_IRQ(5)
-#define IRQ_S3C2416_I2S0	S3C2416_IRQ(6)
-#define IRQ_S3C2416_I2S1	S3C2416_IRQ(7)
-
-#define NR_IRQS_S3C2416		(S3C2416_IRQ(7) + 1)
-
-/* extra irqs for s3c2440/s3c2442 */
-
-#define IRQ_S3C2440_CAM_C	S3C2410_IRQSUB(11)	/* S3C2443 too */
-#define IRQ_S3C2440_CAM_P	S3C2410_IRQSUB(12)	/* S3C2443 too */
-
-#define NR_IRQS_S3C2442		(S3C2410_IRQSUB(12) + 1)
-
-#define IRQ_S3C2440_WDT		S3C2410_IRQSUB(13)
-#define IRQ_S3C2440_AC97	S3C2410_IRQSUB(14)
-
-#define NR_IRQS_S3C2440		(S3C2410_IRQSUB(14) + 1)
-
-/* irqs for s3c2443 */
-
-#define IRQ_S3C2443_DMA		S3C2410_IRQ(17)		/* IRQ_DMA1 */
-#define IRQ_S3C2443_UART3	S3C2410_IRQ(18)		/* IRQ_DMA2 */
-#define IRQ_S3C2443_CFCON	S3C2410_IRQ(19)		/* IRQ_DMA3 */
-#define IRQ_S3C2443_HSMMC	S3C2410_IRQ(20)		/* IRQ_SDI */
-#define IRQ_S3C2443_NAND	S3C2410_IRQ(24)		/* reserved */
-
-#define IRQ_S3C2416_HSMMC0	S3C2410_IRQ(21)		/* S3C2416/S3C2450 */
-
-#define IRQ_HSMMC0		IRQ_S3C2416_HSMMC0
-#define IRQ_HSMMC1		IRQ_S3C2443_HSMMC
-
-#define IRQ_S3C2443_LCD1	S3C2410_IRQSUB(14)
-#define IRQ_S3C2443_LCD2	S3C2410_IRQSUB(15)
-#define IRQ_S3C2443_LCD3	S3C2410_IRQSUB(16)
-#define IRQ_S3C2443_LCD4	S3C2410_IRQSUB(17)
-
-#define IRQ_S3C2443_DMA0	S3C2410_IRQSUB(18)
-#define IRQ_S3C2443_DMA1	S3C2410_IRQSUB(19)
-#define IRQ_S3C2443_DMA2	S3C2410_IRQSUB(20)
-#define IRQ_S3C2443_DMA3	S3C2410_IRQSUB(21)
-#define IRQ_S3C2443_DMA4	S3C2410_IRQSUB(22)
-#define IRQ_S3C2443_DMA5	S3C2410_IRQSUB(23)
-
-/* UART3 */
-#define IRQ_S3C2443_RX3		S3C2410_IRQSUB(24)
-#define IRQ_S3C2443_TX3		S3C2410_IRQSUB(25)
-#define IRQ_S3C2443_ERR3	S3C2410_IRQSUB(26)
-
-#define IRQ_S3C2443_WDT		S3C2410_IRQSUB(27)
-#define IRQ_S3C2443_AC97	S3C2410_IRQSUB(28)
-
-#define NR_IRQS_S3C2443		(S3C2410_IRQSUB(28) + 1)
-
-/* compatibility define. */
-#define IRQ_UART3		IRQ_S3C2443_UART3
-#define IRQ_S3CUART_RX3		IRQ_S3C2443_RX3
-#define IRQ_S3CUART_TX3		IRQ_S3C2443_TX3
-#define IRQ_S3CUART_ERR3	IRQ_S3C2443_ERR3
-
-#define IRQ_LCD_VSYNC		IRQ_S3C2443_LCD3
-#define IRQ_LCD_SYSTEM		IRQ_S3C2443_LCD2
-
-#ifdef CONFIG_CPU_S3C2440
-#define IRQ_S3C244X_AC97 IRQ_S3C2440_AC97
-#else
-#define IRQ_S3C244X_AC97 IRQ_S3C2443_AC97
-#endif
-
-/* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
-#define FIQ_START		IRQ_EINT0
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c/irqs.h b/arch/arm/mach-s3c/irqs.h
index 0bff1c1c8eb0..3ff0e0963080 100644
--- a/arch/arm/mach-s3c/irqs.h
+++ b/arch/arm/mach-s3c/irqs.h
@@ -1,9 +1,2 @@
 /* SPDX-License-Identifier: GPL-2.0 */
-
-#ifdef CONFIG_ARCH_S3C24XX
-#include "irqs-s3c24xx.h"
-#endif
-
-#ifdef CONFIG_ARCH_S3C64XX
 #include "irqs-s3c64xx.h"
-#endif
diff --git a/arch/arm/mach-s3c/mach-amlm5900.c b/arch/arm/mach-s3c/mach-amlm5900.c
deleted file mode 100644
index f85e5885e9b4..000000000000
--- a/arch/arm/mach-s3c/mach-amlm5900.c
+++ /dev/null
@@ -1,248 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (c) 2006 American Microsystems Limited
-//	David Anders <danders@amltd.com>
-//
-// @History:
-// derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
-// Ben Dooks <ben@simtec.co.uk>
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/proc_fs.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <linux/platform_data/fb-s3c2410.h>
-
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-
-#include <linux/platform_data/i2c-s3c2410.h>
-#include "devs.h"
-#include "cpu.h"
-#include "gpio-cfg.h"
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/physmap.h>
-
-#include "s3c24xx.h"
-
-static struct resource amlm5900_nor_resource =
-			DEFINE_RES_MEM(0x00000000, SZ_16M);
-
-static struct mtd_partition amlm5900_mtd_partitions[] = {
-	{
-		.name		= "System",
-		.size		= 0x240000,
-		.offset		= 0,
-		.mask_flags 	= MTD_WRITEABLE,  /* force read-only */
-	}, {
-		.name		= "Kernel",
-		.size		= 0x100000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "Ramdisk",
-		.size		= 0x300000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "JFFS2",
-		.size		= 0x9A0000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "Settings",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,
-	}
-};
-
-static struct physmap_flash_data amlm5900_flash_data = {
-	.width		= 2,
-	.parts		= amlm5900_mtd_partitions,
-	.nr_parts	= ARRAY_SIZE(amlm5900_mtd_partitions),
-};
-
-static struct platform_device amlm5900_device_nor = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev = {
-			.platform_data = &amlm5900_flash_data,
-		},
-	.num_resources	= 1,
-	.resource	= &amlm5900_nor_resource,
-};
-
-static struct map_desc amlm5900_iodesc[] __initdata = {
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg amlm5900_uartcfgs[] = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	}
-};
-
-static struct gpiod_lookup_table amlm5900_mmc_gpio_table = {
-	.dev_id = "s3c2410-sdi",
-	.table = {
-		/* bus pins */
-		GPIO_LOOKUP_IDX("GPIOE",  5, "bus", 0, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  6, "bus", 1, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  7, "bus", 2, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  8, "bus", 3, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  9, "bus", 4, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device *amlm5900_devices[] __initdata = {
-#ifdef CONFIG_FB_S3C2410
-	&s3c_device_lcd,
-#endif
-	&s3c_device_adc,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_ohci,
- 	&s3c_device_rtc,
-	&s3c_device_usbgadget,
-        &s3c_device_sdi,
-	&amlm5900_device_nor,
-};
-
-static void __init amlm5900_map_io(void)
-{
-	s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
-	s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init amlm5900_init_time(void)
-{
-	s3c2410_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-#ifdef CONFIG_FB_S3C2410
-static struct s3c2410fb_display __initdata amlm5900_lcd_info = {
-	.width		= 160,
-	.height		= 160,
-
-	.type		= S3C2410_LCDCON1_STN4,
-
-	.pixclock	= 680000, /* HCLK = 100MHz */
-	.xres		= 160,
-	.yres		= 160,
-	.bpp		= 4,
-	.left_margin	= 1 << (4 + 3),
-	.right_margin	= 8 << 3,
-	.hsync_len	= 48,
-	.upper_margin	= 0,
-	.lower_margin	= 0,
-
-	.lcdcon5	= 0x00000001,
-};
-
-static struct s3c2410fb_mach_info __initdata amlm5900_fb_info = {
-
-	.displays = &amlm5900_lcd_info,
-	.num_displays = 1,
-	.default_display = 0,
-
-	.gpccon =	0xaaaaaaaa,
-	.gpccon_mask =	0xffffffff,
-	.gpccon_reg =	S3C2410_GPCCON,
-	.gpcup =	0x0000ffff,
-	.gpcup_mask =	0xffffffff,
-	.gpcup_reg =	S3C2410_GPCUP,
-
-	.gpdcon =	0xaaaaaaaa,
-	.gpdcon_mask =	0xffffffff,
-	.gpdcon_reg =	S3C2410_GPDCON,
-	.gpdup =	0x0000ffff,
-	.gpdup_mask =	0xffffffff,
-	.gpdup_reg =	S3C2410_GPDUP,
-};
-#endif
-
-static irqreturn_t
-amlm5900_wake_interrupt(int irq, void *ignored)
-{
-	return IRQ_HANDLED;
-}
-
-static void amlm5900_init_pm(void)
-{
-	int ret = 0;
-
-	ret = request_irq(IRQ_EINT9, &amlm5900_wake_interrupt,
-				IRQF_TRIGGER_RISING | IRQF_SHARED,
-				"amlm5900_wakeup", &amlm5900_wake_interrupt);
-	if (ret != 0) {
-		printk(KERN_ERR "AML-M5900: no wakeup irq, %d?\n", ret);
-	} else {
-		enable_irq_wake(IRQ_EINT9);
-		/* configure the suspend/resume status pin */
-		s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
-		s3c_gpio_setpull(S3C2410_GPF(2), S3C_GPIO_PULL_UP);
-	}
-}
-static void __init amlm5900_init(void)
-{
-	amlm5900_init_pm();
-#ifdef CONFIG_FB_S3C2410
-	s3c24xx_fb_set_platdata(&amlm5900_fb_info);
-#endif
-	s3c_i2c0_set_platdata(NULL);
-	gpiod_add_lookup_table(&amlm5900_mmc_gpio_table);
-	platform_add_devices(amlm5900_devices, ARRAY_SIZE(amlm5900_devices));
-}
-
-MACHINE_START(AML_M5900, "AML_M5900")
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2410,
-	.map_io		= amlm5900_map_io,
-	.nr_irqs	= NR_IRQS_S3C2410,
-	.init_irq	= s3c2410_init_irq,
-	.init_machine	= amlm5900_init,
-	.init_time	= amlm5900_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-anubis.c b/arch/arm/mach-s3c/mach-anubis.c
deleted file mode 100644
index 4536f3e66e27..000000000000
--- a/arch/arm/mach-s3c/mach-anubis.c
+++ /dev/null
@@ -1,422 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2003-2009 Simtec Electronics
-//	http://armlinux.simtec.co.uk/
-//	Ben Dooks <ben@simtec.co.uk>
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/sm501.h>
-#include <linux/sm501-regs.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand-ecc-sw-hamming.h>
-#include <linux/mtd/partitions.h>
-
-#include <net/ax88796.h>
-
-#include "devs.h"
-#include "cpu.h"
-#include <linux/platform_data/asoc-s3c24xx_simtec.h>
-
-#include "anubis.h"
-#include "s3c24xx.h"
-#include "simtec.h"
-
-#define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics"
-
-static struct map_desc anubis_iodesc[] __initdata = {
-  /* ISA IO areas */
-
-  {
-	.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
-	.pfn		= __phys_to_pfn(0x0),
-	.length		= SZ_4M,
-	.type		= MT_DEVICE,
-  },
-
-  /* we could possibly compress the next set down into a set of smaller tables
-   * pagetables, but that would mean using an L2 section, and it still means
-   * we cannot actually feed the same register to an LDR due to 16K spacing
-   */
-
-  /* CPLD control registers */
-
-  {
-	.virtual	= (u32)ANUBIS_VA_CTRL1,
-	.pfn		= __phys_to_pfn(ANUBIS_PA_CTRL1),
-	.length		= SZ_4K,
-	.type		= MT_DEVICE,
-  }, {
-	.virtual	= (u32)ANUBIS_VA_IDREG,
-	.pfn		= __phys_to_pfn(ANUBIS_PA_IDREG),
-	.length		= SZ_4K,
-	.type		= MT_DEVICE,
-  },
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
-	},
-	[1] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
-	},
-};
-
-/* NAND Flash on Anubis board */
-
-static int external_map[]   = { 2 };
-static int chip0_map[]      = { 0 };
-static int chip1_map[]      = { 1 };
-
-static struct mtd_partition __initdata anubis_default_nand_part[] = {
-	[0] = {
-		.name	= "Boot Agent",
-		.size	= SZ_16K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "/boot",
-		.size	= SZ_4M - SZ_16K,
-		.offset	= SZ_16K,
-	},
-	[2] = {
-		.name	= "user1",
-		.offset	= SZ_4M,
-		.size	= SZ_32M - SZ_4M,
-	},
-	[3] = {
-		.name	= "user2",
-		.offset	= SZ_32M,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct mtd_partition __initdata anubis_default_nand_part_large[] = {
-	[0] = {
-		.name	= "Boot Agent",
-		.size	= SZ_128K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "/boot",
-		.size	= SZ_4M - SZ_128K,
-		.offset	= SZ_128K,
-	},
-	[2] = {
-		.name	= "user1",
-		.offset	= SZ_4M,
-		.size	= SZ_32M - SZ_4M,
-	},
-	[3] = {
-		.name	= "user2",
-		.offset	= SZ_32M,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-/* the Anubis has 3 selectable slots for nand-flash, the two
- * on-board chip areas, as well as the external slot.
- *
- * Note, there is no current hot-plug support for the External
- * socket.
-*/
-
-static struct s3c2410_nand_set __initdata anubis_nand_sets[] = {
-	[1] = {
-		.name		= "External",
-		.nr_chips	= 1,
-		.nr_map		= external_map,
-		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
-		.partitions	= anubis_default_nand_part,
-	},
-	[0] = {
-		.name		= "chip0",
-		.nr_chips	= 1,
-		.nr_map		= chip0_map,
-		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
-		.partitions	= anubis_default_nand_part,
-	},
-	[2] = {
-		.name		= "chip1",
-		.nr_chips	= 1,
-		.nr_map		= chip1_map,
-		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
-		.partitions	= anubis_default_nand_part,
-	},
-};
-
-static void anubis_nand_select(struct s3c2410_nand_set *set, int slot)
-{
-	unsigned int tmp;
-
-	slot = set->nr_map[slot] & 3;
-
-	pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n",
-		 slot, set, set->nr_map);
-
-	tmp = __raw_readb(ANUBIS_VA_CTRL1);
-	tmp &= ~ANUBIS_CTRL1_NANDSEL;
-	tmp |= slot;
-
-	pr_debug("anubis_nand: ctrl1 now %02x\n", tmp);
-
-	__raw_writeb(tmp, ANUBIS_VA_CTRL1);
-}
-
-static struct s3c2410_platform_nand __initdata anubis_nand_info = {
-	.tacls		= 25,
-	.twrph0		= 55,
-	.twrph1		= 40,
-	.nr_sets	= ARRAY_SIZE(anubis_nand_sets),
-	.sets		= anubis_nand_sets,
-	.select_chip	= anubis_nand_select,
-	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
-};
-
-/* IDE channels */
-
-static struct pata_platform_info anubis_ide_platdata = {
-	.ioport_shift	= 5,
-};
-
-static struct resource anubis_ide0_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2410_CS3, 8 * 32),
-	[2] = DEFINE_RES_MEM(S3C2410_CS3 + (1 << 26) + (6 * 32), 32),
-	[3] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0),
-};
-
-static struct platform_device anubis_device_ide0 = {
-	.name		= "pata_platform",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(anubis_ide0_resource),
-	.resource	= anubis_ide0_resource,
-	.dev	= {
-		.platform_data = &anubis_ide_platdata,
-		.coherent_dma_mask = ~0,
-	},
-};
-
-static struct resource anubis_ide1_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2410_CS4, 8 * 32),
-	[1] = DEFINE_RES_MEM(S3C2410_CS4 + (1 << 26) + (6 * 32), 32),
-	[2] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0),
-};
-
-static struct platform_device anubis_device_ide1 = {
-	.name		= "pata_platform",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(anubis_ide1_resource),
-	.resource	= anubis_ide1_resource,
-	.dev	= {
-		.platform_data = &anubis_ide_platdata,
-		.coherent_dma_mask = ~0,
-	},
-};
-
-/* Asix AX88796 10/100 ethernet controller */
-
-static struct ax_plat_data anubis_asix_platdata = {
-	.flags		= AXFLG_MAC_FROMDEV,
-	.wordlength	= 2,
-	.dcr_val	= 0x48,
-	.rcr_val	= 0x40,
-};
-
-static struct resource anubis_asix_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2410_CS5, 0x20 * 0x20),
-	[1] = DEFINE_RES_IRQ(ANUBIS_IRQ_ASIX),
-};
-
-static struct platform_device anubis_device_asix = {
-	.name		= "ax88796",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(anubis_asix_resource),
-	.resource	= anubis_asix_resource,
-	.dev		= {
-		.platform_data = &anubis_asix_platdata,
-	}
-};
-
-/* SM501 */
-
-static struct resource anubis_sm501_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2410_CS2, SZ_8M),
-	[1] = DEFINE_RES_MEM(S3C2410_CS2 + SZ_64M - SZ_2M, SZ_2M),
-	[2] = DEFINE_RES_IRQ(IRQ_EINT0),
-};
-
-static struct sm501_initdata anubis_sm501_initdata = {
-	.gpio_high	= {
-		.set	= 0x3F000000,		/* 24bit panel */
-		.mask	= 0x0,
-	},
-	.misc_timing	= {
-		.set	= 0x010100,		/* SDRAM timing */
-		.mask	= 0x1F1F00,
-	},
-	.misc_control	= {
-		.set	= SM501_MISC_PNL_24BIT,
-		.mask	= 0,
-	},
-
-	.devices	= SM501_USE_GPIO,
-
-	/* set the SDRAM and bus clocks */
-	.mclk		= 72 * MHZ,
-	.m1xclk		= 144 * MHZ,
-};
-
-static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = {
-	[0] = {
-		.bus_num	= 1,
-		.pin_scl	= 44,
-		.pin_sda	= 45,
-	},
-	[1] = {
-		.bus_num	= 2,
-		.pin_scl	= 40,
-		.pin_sda	= 41,
-	},
-};
-
-static struct sm501_platdata anubis_sm501_platdata = {
-	.init		= &anubis_sm501_initdata,
-	.gpio_base	= -1,
-	.gpio_i2c	= anubis_sm501_gpio_i2c,
-	.gpio_i2c_nr	= ARRAY_SIZE(anubis_sm501_gpio_i2c),
-};
-
-static struct platform_device anubis_device_sm501 = {
-	.name		= "sm501",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(anubis_sm501_resource),
-	.resource	= anubis_sm501_resource,
-	.dev		= {
-		.platform_data = &anubis_sm501_platdata,
-	},
-};
-
-/* Standard Anubis devices */
-
-static struct platform_device *anubis_devices[] __initdata = {
-	&s3c2410_device_dclk,
-	&s3c_device_ohci,
-	&s3c_device_wdt,
-	&s3c_device_adc,
-	&s3c_device_i2c0,
- 	&s3c_device_rtc,
-	&s3c_device_nand,
-	&anubis_device_ide0,
-	&anubis_device_ide1,
-	&anubis_device_asix,
-	&anubis_device_sm501,
-};
-
-/* I2C devices. */
-
-static struct i2c_board_info anubis_i2c_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("tps65011", 0x48),
-		.irq	= IRQ_EINT20,
-	}
-};
-
-/* Audio setup */
-static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = {
-	.have_mic	= 1,
-	.have_lout	= 1,
-	.output_cdclk	= 1,
-	.use_mpllin	= 1,
-	.amp_gpio	= S3C2410_GPB(2),
-	.amp_gain[0]	= S3C2410_GPD(10),
-	.amp_gain[1]	= S3C2410_GPD(11),
-};
-
-static void __init anubis_map_io(void)
-{
-	s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
-	s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-
-	/* check for the newer revision boards with large page nand */
-
-	if ((__raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK) >= 4) {
-		printk(KERN_INFO "ANUBIS-B detected (revision %d)\n",
-		       __raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK);
-		anubis_nand_sets[0].partitions = anubis_default_nand_part_large;
-		anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
-	} else {
-		/* ensure that the GPIO is setup */
-		gpio_request_one(S3C2410_GPA(0), GPIOF_OUT_INIT_HIGH, NULL);
-		gpio_free(S3C2410_GPA(0));
-	}
-}
-
-static void __init anubis_init_time(void)
-{
-	s3c2440_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-static void __init anubis_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	s3c_nand_set_platdata(&anubis_nand_info);
-	simtec_audio_add(NULL, false, &anubis_audio);
-
-	platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
-
-	i2c_register_board_info(0, anubis_i2c_devs,
-				ARRAY_SIZE(anubis_i2c_devs));
-}
-
-
-MACHINE_START(ANUBIS, "Simtec-Anubis")
-	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2440,
-	.map_io		= anubis_map_io,
-	.init_machine	= anubis_init,
-	.init_irq	= s3c2440_init_irq,
-	.init_time	= anubis_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-anw6410.c b/arch/arm/mach-s3c/mach-anw6410.c
deleted file mode 100644
index b67eae43e04f..000000000000
--- a/arch/arm/mach-s3c/mach-anw6410.c
+++ /dev/null
@@ -1,230 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2008 Openmoko, Inc.
-// Copyright 2008 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//	http://armlinux.simtec.co.uk/
-// Copyright 2009 Kwangwoo Lee
-//	Kwangwoo Lee <kwangwoo.lee@gmail.com>
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/dm9000.h>
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "map.h"
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-#include "fb.h"
-
-#include "devs.h"
-#include "cpu.h"
-#include "irqs.h"
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-
-#include "s3c64xx.h"
-#include "regs-modem-s3c64xx.h"
-
-/* DM9000 */
-#define ANW6410_PA_DM9000	(0x18000000)
-
-/* A hardware buffer to control external devices is mapped at 0x30000000.
- * It can not be read. So current status must be kept in anw6410_extdev_status.
- */
-#define ANW6410_VA_EXTDEV	S3C_ADDR(0x02000000)
-#define ANW6410_PA_EXTDEV	(0x30000000)
-
-#define ANW6410_EN_DM9000	(1<<11)
-#define ANW6410_EN_LCD		(1<<14)
-
-static __u32 anw6410_extdev_status;
-
-static struct s3c2410_uartcfg anw6410_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-};
-
-/* framebuffer and LCD setup. */
-static void __init anw6410_lcd_mode_set(void)
-{
-	u32 tmp;
-
-	/* set the LCD type */
-	tmp = __raw_readl(S3C64XX_SPCON);
-	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
-	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
-	__raw_writel(tmp, S3C64XX_SPCON);
-
-	/* remove the LCD bypass */
-	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
-	tmp &= ~MIFPCON_LCD_BYPASS;
-	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
-}
-
-/* GPF1 = LCD panel power
- * GPF4 = LCD backlight control
- */
-static void anw6410_lcd_power_set(struct plat_lcd_data *pd,
-				   unsigned int power)
-{
-	if (power) {
-		anw6410_extdev_status |= (ANW6410_EN_LCD << 16);
-		__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
-
-		gpio_direction_output(S3C64XX_GPF(1), 1);
-		gpio_direction_output(S3C64XX_GPF(4), 1);
-	} else {
-		anw6410_extdev_status &= ~(ANW6410_EN_LCD << 16);
-		__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
-
-		gpio_direction_output(S3C64XX_GPF(1), 0);
-		gpio_direction_output(S3C64XX_GPF(4), 0);
-	}
-}
-
-static struct plat_lcd_data anw6410_lcd_power_data = {
-	.set_power	= anw6410_lcd_power_set,
-};
-
-static struct platform_device anw6410_lcd_powerdev = {
-	.name			= "platform-lcd",
-	.dev.parent		= &s3c_device_fb.dev,
-	.dev.platform_data	= &anw6410_lcd_power_data,
-};
-
-static struct s3c_fb_pd_win anw6410_fb_win0 = {
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-	.xres		= 800,
-	.yres		= 480,
-};
-
-static struct fb_videomode anw6410_lcd_timing = {
-	.left_margin	= 8,
-	.right_margin	= 13,
-	.upper_margin	= 7,
-	.lower_margin	= 5,
-	.hsync_len	= 3,
-	.vsync_len	= 1,
-	.xres		= 800,
-	.yres		= 480,
-};
-
-/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
-static struct s3c_fb_platdata anw6410_lcd_pdata __initdata = {
-	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
-	.vtiming	= &anw6410_lcd_timing,
-	.win[0]		= &anw6410_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-};
-
-/* DM9000AEP 10/100 ethernet controller */
-static void __init anw6410_dm9000_enable(void)
-{
-	anw6410_extdev_status |= (ANW6410_EN_DM9000 << 16);
-	__raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
-}
-
-static struct resource anw6410_dm9000_resource[] = {
-	[0] = DEFINE_RES_MEM(ANW6410_PA_DM9000, 4),
-	[1] = DEFINE_RES_MEM(ANW6410_PA_DM9000 + 4, 501),
-	[2] = DEFINE_RES_NAMED(IRQ_EINT(15), 1, NULL, IORESOURCE_IRQ \
-					| IRQF_TRIGGER_HIGH),
-};
-
-static struct dm9000_plat_data anw6410_dm9000_pdata = {
-	.flags	  = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
-	/* dev_addr can be set to provide hwaddr. */
-};
-
-static struct platform_device anw6410_device_eth = {
-	.name	= "dm9000",
-	.id	= -1,
-	.num_resources	= ARRAY_SIZE(anw6410_dm9000_resource),
-	.resource	= anw6410_dm9000_resource,
-	.dev	= {
-		.platform_data  = &anw6410_dm9000_pdata,
-	},
-};
-
-static struct map_desc anw6410_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)ANW6410_VA_EXTDEV,
-		.pfn		= __phys_to_pfn(ANW6410_PA_EXTDEV),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct platform_device *anw6410_devices[] __initdata = {
-	&s3c_device_fb,
-	&anw6410_lcd_powerdev,
-	&anw6410_device_eth,
-};
-
-static void __init anw6410_map_io(void)
-{
-	s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
-	s3c64xx_set_xtal_freq(12000000);
-	s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
-	s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
-
-	anw6410_lcd_mode_set();
-}
-
-static void __init anw6410_machine_init(void)
-{
-	s3c_fb_set_platdata(&anw6410_lcd_pdata);
-
-	gpio_request(S3C64XX_GPF(1), "panel power");
-	gpio_request(S3C64XX_GPF(4), "LCD backlight");
-
-	anw6410_dm9000_enable();
-
-	platform_add_devices(anw6410_devices, ARRAY_SIZE(anw6410_devices));
-}
-
-MACHINE_START(ANW6410, "A&W6410")
-	/* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= S3C64XX_NR_IRQS,
-	.init_irq	= s3c6410_init_irq,
-	.map_io		= anw6410_map_io,
-	.init_machine	= anw6410_machine_init,
-	.init_time	= s3c64xx_timer_init,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-at2440evb.c b/arch/arm/mach-s3c/mach-at2440evb.c
deleted file mode 100644
index 743403d873e0..000000000000
--- a/arch/arm/mach-s3c/mach-at2440evb.c
+++ /dev/null
@@ -1,233 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com>
-//      Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk>
-//      and modifications by SBZ <sbz@spgui.org> and
-//      Weibing <http://weibing.blogbus.com>
-//
-// For product information, visit http://www.arm.com/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/gpio/machine.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/dm9000.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <linux/platform_data/fb-s3c2410.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand-ecc-sw-hamming.h>
-#include <linux/mtd/partitions.h>
-
-#include "devs.h"
-#include "cpu.h"
-#include <linux/platform_data/mmc-s3cmci.h>
-
-#include "s3c24xx.h"
-
-static struct map_desc at2440evb_iodesc[] __initdata = {
-	/* Nothing here */
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
-	},
-};
-
-/* NAND Flash on AT2440EVB board */
-
-static struct mtd_partition __initdata at2440evb_default_nand_part[] = {
-	[0] = {
-		.name	= "Boot Agent",
-		.size	= SZ_256K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "Kernel",
-		.size	= SZ_2M,
-		.offset	= SZ_256K,
-	},
-	[2] = {
-		.name	= "Root",
-		.offset	= SZ_256K + SZ_2M,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct s3c2410_nand_set __initdata at2440evb_nand_sets[] = {
-	[0] = {
-		.name		= "nand",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(at2440evb_default_nand_part),
-		.partitions	= at2440evb_default_nand_part,
-	},
-};
-
-static struct s3c2410_platform_nand __initdata at2440evb_nand_info = {
-	.tacls		= 25,
-	.twrph0		= 55,
-	.twrph1		= 40,
-	.nr_sets	= ARRAY_SIZE(at2440evb_nand_sets),
-	.sets		= at2440evb_nand_sets,
-	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
-};
-
-/* DM9000AEP 10/100 ethernet controller */
-
-static struct resource at2440evb_dm9k_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2410_CS3, 4),
-	[1] = DEFINE_RES_MEM(S3C2410_CS3 + 4, 4),
-	[2] = DEFINE_RES_NAMED(IRQ_EINT7, 1, NULL, IORESOURCE_IRQ \
-					| IORESOURCE_IRQ_HIGHEDGE),
-};
-
-static struct dm9000_plat_data at2440evb_dm9k_pdata = {
-	.flags		= (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
-};
-
-static struct platform_device at2440evb_device_eth = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(at2440evb_dm9k_resource),
-	.resource	= at2440evb_dm9k_resource,
-	.dev		= {
-		.platform_data	= &at2440evb_dm9k_pdata,
-	},
-};
-
-static struct s3c24xx_mci_pdata at2440evb_mci_pdata __initdata = {
-	.set_power	= s3c24xx_mci_def_set_power,
-};
-
-static struct gpiod_lookup_table at2440evb_mci_gpio_table = {
-	.dev_id = "s3c2410-sdi",
-	.table = {
-		/* Card detect S3C2410_GPG(10) */
-		GPIO_LOOKUP("GPIOG", 10, "cd", GPIO_ACTIVE_LOW),
-		/* bus pins */
-		GPIO_LOOKUP_IDX("GPIOE",  5, "bus", 0, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  6, "bus", 1, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  7, "bus", 2, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  8, "bus", 3, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  9, "bus", 4, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-
-/* 7" LCD panel */
-
-static struct s3c2410fb_display at2440evb_lcd_cfg __initdata = {
-
-	.lcdcon5	= S3C2410_LCDCON5_FRM565 |
-			  S3C2410_LCDCON5_INVVLINE |
-			  S3C2410_LCDCON5_INVVFRAME |
-			  S3C2410_LCDCON5_PWREN |
-			  S3C2410_LCDCON5_HWSWP,
-
-	.type		= S3C2410_LCDCON1_TFT,
-
-	.width		= 800,
-	.height		= 480,
-
-	.pixclock	= 33333, /* HCLK 60 MHz, divisor 2 */
-	.xres		= 800,
-	.yres		= 480,
-	.bpp		= 16,
-	.left_margin	= 88,
-	.right_margin	= 40,
-	.hsync_len	= 128,
-	.upper_margin	= 32,
-	.lower_margin	= 11,
-	.vsync_len	= 2,
-};
-
-static struct s3c2410fb_mach_info at2440evb_fb_info __initdata = {
-	.displays	= &at2440evb_lcd_cfg,
-	.num_displays	= 1,
-	.default_display = 0,
-};
-
-static struct platform_device *at2440evb_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_wdt,
-	&s3c_device_adc,
-	&s3c_device_i2c0,
-	&s3c_device_rtc,
-	&s3c_device_nand,
-	&s3c_device_sdi,
-	&s3c_device_lcd,
-	&at2440evb_device_eth,
-};
-
-static void __init at2440evb_map_io(void)
-{
-	s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
-	s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init at2440evb_init_time(void)
-{
-	s3c2440_init_clocks(16934400);
-	s3c24xx_timer_init();
-}
-
-static void __init at2440evb_init(void)
-{
-	s3c24xx_fb_set_platdata(&at2440evb_fb_info);
-	gpiod_add_lookup_table(&at2440evb_mci_gpio_table);
-	s3c24xx_mci_set_platdata(&at2440evb_mci_pdata);
-	s3c_nand_set_platdata(&at2440evb_nand_info);
-	s3c_i2c0_set_platdata(NULL);
-
-	platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices));
-}
-
-
-MACHINE_START(AT2440EVB, "AT2440EVB")
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2440,
-	.map_io		= at2440evb_map_io,
-	.init_machine	= at2440evb_init,
-	.init_irq	= s3c2440_init_irq,
-	.init_time	= at2440evb_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-bast.c b/arch/arm/mach-s3c/mach-bast.c
deleted file mode 100644
index a33ceab81e09..000000000000
--- a/arch/arm/mach-s3c/mach-bast.c
+++ /dev/null
@@ -1,583 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2003-2008 Simtec Electronics
-//   Ben Dooks <ben@simtec.co.uk>
-//
-// http://www.simtec.co.uk/products/EB2410ITX/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/syscore_ops.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/dm9000.h>
-#include <linux/ata_platform.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/serial_8250.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand-ecc-sw-hamming.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/platform_data/asoc-s3c24xx_simtec.h>
-#include <linux/platform_data/hwmon-s3c.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-
-#include <net/ax88796.h>
-
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach-types.h>
-
-#include <linux/platform_data/fb-s3c2410.h>
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-
-#include "cpu.h"
-#include <linux/soc/samsung/s3c-cpu-freq.h>
-#include "devs.h"
-#include "gpio-cfg.h"
-
-#include "bast.h"
-#include "s3c24xx.h"
-#include "simtec.h"
-
-#define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics"
-
-/* macros for virtual address mods for the io space entries */
-#define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
-#define VA_C4(item) ((unsigned long)(item) + BAST_VAM_CS4)
-#define VA_C3(item) ((unsigned long)(item) + BAST_VAM_CS3)
-#define VA_C2(item) ((unsigned long)(item) + BAST_VAM_CS2)
-
-/* macros to modify the physical addresses for io space */
-
-#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2))
-#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3))
-#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4))
-#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5))
-
-static struct map_desc bast_iodesc[] __initdata = {
-  /* ISA IO areas */
-  {
-	  .virtual	= (u32)S3C24XX_VA_ISA_BYTE,
-	  .pfn		= PA_CS2(BAST_PA_ISAIO),
-	  .length	= SZ_16M,
-	  .type		= MT_DEVICE,
-  },
-  /* bast CPLD control registers, and external interrupt controls */
-  {
-	  .virtual	= (u32)BAST_VA_CTRL1,
-	  .pfn		= __phys_to_pfn(BAST_PA_CTRL1),
-	  .length	= SZ_1M,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)BAST_VA_CTRL2,
-	  .pfn		= __phys_to_pfn(BAST_PA_CTRL2),
-	  .length	= SZ_1M,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)BAST_VA_CTRL3,
-	  .pfn		= __phys_to_pfn(BAST_PA_CTRL3),
-	  .length	= SZ_1M,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)BAST_VA_CTRL4,
-	  .pfn		= __phys_to_pfn(BAST_PA_CTRL4),
-	  .length	= SZ_1M,
-	  .type		= MT_DEVICE,
-  },
-  /* PC104 IRQ mux */
-  {
-	  .virtual	= (u32)BAST_VA_PC104_IRQREQ,
-	  .pfn		= __phys_to_pfn(BAST_PA_PC104_IRQREQ),
-	  .length	= SZ_1M,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)BAST_VA_PC104_IRQRAW,
-	  .pfn		= __phys_to_pfn(BAST_PA_PC104_IRQRAW),
-	  .length	= SZ_1M,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)BAST_VA_PC104_IRQMASK,
-	  .pfn		= __phys_to_pfn(BAST_PA_PC104_IRQMASK),
-	  .length	= SZ_1M,
-	  .type		= MT_DEVICE,
-  },
-
-  /* peripheral space... one for each of fast/slow/byte/16bit */
-  /* note, ide is only decoded in word space, even though some registers
-   * are only 8bit */
-
-  /* slow, byte */
-  { VA_C2(BAST_VA_ISAIO),   PA_CS2(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
-  { VA_C2(BAST_VA_ISAMEM),  PA_CS2(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
-  { VA_C2(BAST_VA_SUPERIO), PA_CS2(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
-
-  /* slow, word */
-  { VA_C3(BAST_VA_ISAIO),   PA_CS3(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
-  { VA_C3(BAST_VA_ISAMEM),  PA_CS3(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
-  { VA_C3(BAST_VA_SUPERIO), PA_CS3(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
-
-  /* fast, byte */
-  { VA_C4(BAST_VA_ISAIO),   PA_CS4(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
-  { VA_C4(BAST_VA_ISAMEM),  PA_CS4(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
-  { VA_C4(BAST_VA_SUPERIO), PA_CS4(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
-
-  /* fast, word */
-  { VA_C5(BAST_VA_ISAIO),   PA_CS5(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
-  { VA_C5(BAST_VA_ISAMEM),  PA_CS5(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
-  { VA_C5(BAST_VA_SUPERIO), PA_CS5(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	/* port 2 is not actually used */
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	}
-};
-
-/* NAND Flash on BAST board */
-
-#ifdef CONFIG_PM
-static int bast_pm_suspend(void)
-{
-	/* ensure that an nRESET is not generated on resume. */
-	gpio_direction_output(S3C2410_GPA(21), 1);
-	return 0;
-}
-
-static void bast_pm_resume(void)
-{
-	s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
-}
-
-#else
-#define bast_pm_suspend NULL
-#define bast_pm_resume NULL
-#endif
-
-static struct syscore_ops bast_pm_syscore_ops = {
-	.suspend	= bast_pm_suspend,
-	.resume		= bast_pm_resume,
-};
-
-static int smartmedia_map[] = { 0 };
-static int chip0_map[] = { 1 };
-static int chip1_map[] = { 2 };
-static int chip2_map[] = { 3 };
-
-static struct mtd_partition __initdata bast_default_nand_part[] = {
-	[0] = {
-		.name	= "Boot Agent",
-		.size	= SZ_16K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "/boot",
-		.size	= SZ_4M - SZ_16K,
-		.offset	= SZ_16K,
-	},
-	[2] = {
-		.name	= "user",
-		.offset	= SZ_4M,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-/* the bast has 4 selectable slots for nand-flash, the three
- * on-board chip areas, as well as the external SmartMedia
- * slot.
- *
- * Note, there is no current hot-plug support for the SmartMedia
- * socket.
-*/
-
-static struct s3c2410_nand_set __initdata bast_nand_sets[] = {
-	[0] = {
-		.name		= "SmartMedia",
-		.nr_chips	= 1,
-		.nr_map		= smartmedia_map,
-		.options        = NAND_SCAN_SILENT_NODEV,
-		.nr_partitions	= ARRAY_SIZE(bast_default_nand_part),
-		.partitions	= bast_default_nand_part,
-	},
-	[1] = {
-		.name		= "chip0",
-		.nr_chips	= 1,
-		.nr_map		= chip0_map,
-		.nr_partitions	= ARRAY_SIZE(bast_default_nand_part),
-		.partitions	= bast_default_nand_part,
-	},
-	[2] = {
-		.name		= "chip1",
-		.nr_chips	= 1,
-		.nr_map		= chip1_map,
-		.options        = NAND_SCAN_SILENT_NODEV,
-		.nr_partitions	= ARRAY_SIZE(bast_default_nand_part),
-		.partitions	= bast_default_nand_part,
-	},
-	[3] = {
-		.name		= "chip2",
-		.nr_chips	= 1,
-		.nr_map		= chip2_map,
-		.options        = NAND_SCAN_SILENT_NODEV,
-		.nr_partitions	= ARRAY_SIZE(bast_default_nand_part),
-		.partitions	= bast_default_nand_part,
-	}
-};
-
-static void bast_nand_select(struct s3c2410_nand_set *set, int slot)
-{
-	unsigned int tmp;
-
-	slot = set->nr_map[slot] & 3;
-
-	pr_debug("bast_nand: selecting slot %d (set %p,%p)\n",
-		 slot, set, set->nr_map);
-
-	tmp = __raw_readb(BAST_VA_CTRL2);
-	tmp &= BAST_CPLD_CTLR2_IDERST;
-	tmp |= slot;
-	tmp |= BAST_CPLD_CTRL2_WNAND;
-
-	pr_debug("bast_nand: ctrl2 now %02x\n", tmp);
-
-	__raw_writeb(tmp, BAST_VA_CTRL2);
-}
-
-static struct s3c2410_platform_nand __initdata bast_nand_info = {
-	.tacls		= 30,
-	.twrph0		= 60,
-	.twrph1		= 60,
-	.nr_sets	= ARRAY_SIZE(bast_nand_sets),
-	.sets		= bast_nand_sets,
-	.select_chip	= bast_nand_select,
-	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
-};
-
-/* DM9000 */
-
-static struct resource bast_dm9k_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000, 4),
-	[1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000 + 0x40, 0x40),
-	[2] = DEFINE_RES_NAMED(BAST_IRQ_DM9000 , 1, NULL, IORESOURCE_IRQ \
-					| IORESOURCE_IRQ_HIGHLEVEL),
-};
-
-/* for the moment we limit ourselves to 16bit IO until some
- * better IO routines can be written and tested
-*/
-
-static struct dm9000_plat_data bast_dm9k_platdata = {
-	.flags		= DM9000_PLATF_16BITONLY,
-};
-
-static struct platform_device bast_device_dm9k = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(bast_dm9k_resource),
-	.resource	= bast_dm9k_resource,
-	.dev		= {
-		.platform_data = &bast_dm9k_platdata,
-	}
-};
-
-/* serial devices */
-
-#define SERIAL_BASE  (S3C2410_CS2 + BAST_PA_SUPERIO)
-#define SERIAL_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_SHARE_IRQ)
-#define SERIAL_CLK   (1843200)
-
-static struct plat_serial8250_port bast_sio_data[] = {
-	[0] = {
-		.mapbase	= SERIAL_BASE + 0x2f8,
-		.irq		= BAST_IRQ_PCSERIAL1,
-		.flags		= SERIAL_FLAGS,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= SERIAL_CLK,
-	},
-	[1] = {
-		.mapbase	= SERIAL_BASE + 0x3f8,
-		.irq		= BAST_IRQ_PCSERIAL2,
-		.flags		= SERIAL_FLAGS,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= SERIAL_CLK,
-	},
-	{ }
-};
-
-static struct platform_device bast_sio = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= &bast_sio_data,
-	},
-};
-
-/* we have devices on the bus which cannot work much over the
- * standard 100KHz i2c bus frequency
-*/
-
-static struct s3c2410_platform_i2c __initdata bast_i2c_info = {
-	.flags		= 0,
-	.slave_addr	= 0x10,
-	.frequency	= 100*1000,
-};
-
-/* Asix AX88796 10/100 ethernet controller */
-
-static struct ax_plat_data bast_asix_platdata = {
-	.flags		= AXFLG_MAC_FROMDEV,
-	.wordlength	= 2,
-	.dcr_val	= 0x48,
-	.rcr_val	= 0x40,
-};
-
-static struct resource bast_asix_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET, 0x18 * 0x20),
-	[1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20), 1),
-	[2] = DEFINE_RES_IRQ(BAST_IRQ_ASIX),
-};
-
-static struct platform_device bast_device_asix = {
-	.name		= "ax88796",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(bast_asix_resource),
-	.resource	= bast_asix_resource,
-	.dev		= {
-		.platform_data = &bast_asix_platdata
-	}
-};
-
-/* Asix AX88796 10/100 ethernet controller parallel port */
-
-static struct resource bast_asixpp_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20), \
-					0x30 * 0x20),
-};
-
-static struct platform_device bast_device_axpp = {
-	.name		= "ax88796-pp",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(bast_asixpp_resource),
-	.resource	= bast_asixpp_resource,
-};
-
-/* LCD/VGA controller */
-
-static struct s3c2410fb_display __initdata bast_lcd_info[] = {
-	{
-		.type		= S3C2410_LCDCON1_TFT,
-		.width		= 640,
-		.height		= 480,
-
-		.pixclock	= 33333,
-		.xres		= 640,
-		.yres		= 480,
-		.bpp		= 4,
-		.left_margin	= 40,
-		.right_margin	= 20,
-		.hsync_len	= 88,
-		.upper_margin	= 30,
-		.lower_margin	= 32,
-		.vsync_len	= 3,
-
-		.lcdcon5	= 0x00014b02,
-	},
-	{
-		.type		= S3C2410_LCDCON1_TFT,
-		.width		= 640,
-		.height		= 480,
-
-		.pixclock	= 33333,
-		.xres		= 640,
-		.yres		= 480,
-		.bpp		= 8,
-		.left_margin	= 40,
-		.right_margin	= 20,
-		.hsync_len	= 88,
-		.upper_margin	= 30,
-		.lower_margin	= 32,
-		.vsync_len	= 3,
-
-		.lcdcon5	= 0x00014b02,
-	},
-	{
-		.type		= S3C2410_LCDCON1_TFT,
-		.width		= 640,
-		.height		= 480,
-
-		.pixclock	= 33333,
-		.xres		= 640,
-		.yres		= 480,
-		.bpp		= 16,
-		.left_margin	= 40,
-		.right_margin	= 20,
-		.hsync_len	= 88,
-		.upper_margin	= 30,
-		.lower_margin	= 32,
-		.vsync_len	= 3,
-
-		.lcdcon5	= 0x00014b02,
-	},
-};
-
-/* LCD/VGA controller */
-
-static struct s3c2410fb_mach_info __initdata bast_fb_info = {
-
-	.displays = bast_lcd_info,
-	.num_displays = ARRAY_SIZE(bast_lcd_info),
-	.default_display = 1,
-};
-
-/* I2C devices fitted. */
-
-static struct i2c_board_info bast_i2c_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("tlv320aic23", 0x1a),
-	}, {
-		I2C_BOARD_INFO("simtec-pmu", 0x6b),
-	}, {
-		I2C_BOARD_INFO("ch7013", 0x75),
-	},
-};
-
-static struct s3c_hwmon_pdata bast_hwmon_info = {
-	/* LCD contrast (0-6.6V) */
-	.in[0] = &(struct s3c_hwmon_chcfg) {
-		.name		= "lcd-contrast",
-		.mult		= 3300,
-		.div		= 512,
-	},
-	/* LED current feedback */
-	.in[1] = &(struct s3c_hwmon_chcfg) {
-		.name		= "led-feedback",
-		.mult		= 3300,
-		.div		= 1024,
-	},
-	/* LCD feedback (0-6.6V) */
-	.in[2] = &(struct s3c_hwmon_chcfg) {
-		.name		= "lcd-feedback",
-		.mult		= 3300,
-		.div		= 512,
-	},
-	/* Vcore (1.8-2.0V), Vref 3.3V  */
-	.in[3] = &(struct s3c_hwmon_chcfg) {
-		.name		= "vcore",
-		.mult		= 3300,
-		.div		= 1024,
-	},
-};
-
-/* Standard BAST devices */
-// cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
-
-static struct platform_device *bast_devices[] __initdata = {
-	&s3c2410_device_dclk,
-	&s3c_device_ohci,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
- 	&s3c_device_rtc,
-	&s3c_device_nand,
-	&s3c_device_adc,
-	&s3c_device_hwmon,
-	&bast_device_dm9k,
-	&bast_device_asix,
-	&bast_device_axpp,
-	&bast_sio,
-};
-
-static struct s3c_cpufreq_board __initdata bast_cpufreq = {
-	.refresh	= 7800, /* 7.8usec */
-	.auto_io	= 1,
-	.need_io	= 1,
-};
-
-static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = {
-	.have_mic	= 1,
-	.have_lout	= 1,
-};
-
-static void __init bast_map_io(void)
-{
-	s3c_hwmon_set_platdata(&bast_hwmon_info);
-
-	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
-	s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init bast_init_time(void)
-{
-	s3c2410_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-static void __init bast_init(void)
-{
-	register_syscore_ops(&bast_pm_syscore_ops);
-
-	s3c_i2c0_set_platdata(&bast_i2c_info);
-	s3c_nand_set_platdata(&bast_nand_info);
-	s3c24xx_fb_set_platdata(&bast_fb_info);
-	platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
-
-	i2c_register_board_info(0, bast_i2c_devs,
-				ARRAY_SIZE(bast_i2c_devs));
-
-	usb_simtec_init();
-	nor_simtec_init();
-	simtec_audio_add(NULL, true, &bast_audio);
-
-	WARN_ON(gpio_request(S3C2410_GPA(21), "bast nreset"));
-	
-	s3c_cpufreq_setboard(&bast_cpufreq);
-}
-
-MACHINE_START(BAST, "Simtec-BAST")
-	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2410,
-	.map_io		= bast_map_io,
-	.init_irq	= s3c2410_init_irq,
-	.init_machine	= bast_init,
-	.init_time	= bast_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-crag6410.c b/arch/arm/mach-s3c/mach-crag6410.c
index 2ecb85856e24..7c4bed4370a1 100644
--- a/arch/arm/mach-s3c/mach-crag6410.c
+++ b/arch/arm/mach-s3c/mach-crag6410.c
@@ -58,7 +58,6 @@
 #include "keypad.h"
 #include "devs.h"
 #include "cpu.h"
-#include <linux/soc/samsung/s3c-adc.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 #include "pm.h"
 
diff --git a/arch/arm/mach-s3c/mach-gta02.c b/arch/arm/mach-s3c/mach-gta02.c
deleted file mode 100644
index d50a81d85ae1..000000000000
--- a/arch/arm/mach-s3c/mach-gta02.c
+++ /dev/null
@@ -1,588 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// S3C2442 Machine Support for Openmoko GTA02 / FreeRunner.
-//
-// Copyright (C) 2006-2009 by Openmoko, Inc.
-// Authors: Harald Welte <laforge@openmoko.org>
-//          Andy Green <andy@openmoko.org>
-//          Werner Almesberger <werner@openmoko.org>
-// All rights reserved.
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/workqueue.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-
-#include <linux/mmc/host.h>
-
-#include <linux/mfd/pcf50633/adc.h>
-#include <linux/mfd/pcf50633/backlight.h>
-#include <linux/mfd/pcf50633/core.h>
-#include <linux/mfd/pcf50633/gpio.h>
-#include <linux/mfd/pcf50633/mbc.h>
-#include <linux/mfd/pcf50633/pmic.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand-ecc-sw-hamming.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-
-#include <linux/regulator/machine.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/s3c24xx.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <linux/platform_data/usb-ohci-s3c2410.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <linux/platform_data/fb-s3c2410.h>
-
-#include "regs-gpio.h"
-#include "regs-irq.h"
-#include "gpio-samsung.h"
-
-#include "cpu.h"
-#include "devs.h"
-#include "gpio-cfg.h"
-#include "pm.h"
-
-#include "s3c24xx.h"
-#include "gta02.h"
-
-static struct pcf50633 *gta02_pcf;
-
-/*
- * This gets called frequently when we paniced.
- */
-
-static long gta02_panic_blink(int state)
-{
-	char led;
-
-	led = (state) ? 1 : 0;
-	gpio_direction_output(GTA02_GPIO_AUX_LED, led);
-
-	return 0;
-}
-
-
-static struct map_desc gta02_iodesc[] __initdata = {
-	{
-		.virtual	= 0xe0000000,
-		.pfn		= __phys_to_pfn(S3C2410_CS3 + 0x01000000),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE
-	},
-};
-
-#define UCON (S3C2410_UCON_DEFAULT | S3C2443_UCON_RXERR_IRQEN)
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg gta02_uartcfgs[] = {
-	[0] = {
-		.hwport		= 0,
-		.flags		= 0,
-		.ucon		= UCON,
-		.ulcon		= ULCON,
-		.ufcon		= UFCON,
-	},
-	[1] = {
-		.hwport		= 1,
-		.flags		= 0,
-		.ucon		= UCON,
-		.ulcon		= ULCON,
-		.ufcon		= UFCON,
-	},
-	[2] = {
-		.hwport		= 2,
-		.flags		= 0,
-		.ucon		= UCON,
-		.ulcon		= ULCON,
-		.ufcon		= UFCON,
-	},
-};
-
-#ifdef CONFIG_CHARGER_PCF50633
-/*
- * On GTA02 the 1A charger features a 48K resistor to 0V on the ID pin.
- * We use this to recognize that we can pull 1A from the USB socket.
- *
- * These constants are the measured pcf50633 ADC levels with the 1A
- * charger / 48K resistor, and with no pulldown resistor.
- */
-
-#define ADC_NOM_CHG_DETECT_1A 6
-#define ADC_NOM_CHG_DETECT_USB 43
-
-#ifdef CONFIG_PCF50633_ADC
-static void
-gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res)
-{
-	int  ma;
-
-	/* Interpret charger type */
-	if (res < ((ADC_NOM_CHG_DETECT_USB + ADC_NOM_CHG_DETECT_1A) / 2)) {
-
-		/*
-		 * Sanity - stop GPO driving out now that we have a 1A charger
-		 * GPO controls USB Host power generation on GTA02
-		 */
-		pcf50633_gpio_set(pcf, PCF50633_GPO, 0);
-
-		ma = 1000;
-	} else
-		ma = 100;
-
-	pcf50633_mbc_usb_curlim_set(pcf, ma);
-}
-#endif
-
-static struct delayed_work gta02_charger_work;
-static int gta02_usb_vbus_draw;
-
-static void gta02_charger_worker(struct work_struct *work)
-{
-	if (gta02_usb_vbus_draw) {
-		pcf50633_mbc_usb_curlim_set(gta02_pcf, gta02_usb_vbus_draw);
-		return;
-	}
-
-#ifdef CONFIG_PCF50633_ADC
-	pcf50633_adc_async_read(gta02_pcf,
-				PCF50633_ADCC1_MUX_ADCIN1,
-				PCF50633_ADCC1_AVERAGE_16,
-				gta02_configure_pmu_for_charger,
-				NULL);
-#else
-	/*
-	 * If the PCF50633 ADC is disabled we fallback to a
-	 * 100mA limit for safety.
-	 */
-	pcf50633_mbc_usb_curlim_set(gta02_pcf, 100);
-#endif
-}
-
-#define GTA02_CHARGER_CONFIGURE_TIMEOUT ((3000 * HZ) / 1000)
-
-static void gta02_pmu_event_callback(struct pcf50633 *pcf, int irq)
-{
-	if (irq == PCF50633_IRQ_USBINS) {
-		schedule_delayed_work(&gta02_charger_work,
-				      GTA02_CHARGER_CONFIGURE_TIMEOUT);
-
-		return;
-	}
-
-	if (irq == PCF50633_IRQ_USBREM) {
-		cancel_delayed_work_sync(&gta02_charger_work);
-		gta02_usb_vbus_draw = 0;
-	}
-}
-
-static void gta02_udc_vbus_draw(unsigned int ma)
-{
-	if (!gta02_pcf)
-		return;
-
-	gta02_usb_vbus_draw = ma;
-
-	schedule_delayed_work(&gta02_charger_work,
-			      GTA02_CHARGER_CONFIGURE_TIMEOUT);
-}
-#else /* !CONFIG_CHARGER_PCF50633 */
-#define gta02_pmu_event_callback	NULL
-#define gta02_udc_vbus_draw		NULL
-#endif
-
-static char *gta02_batteries[] = {
-	"battery",
-};
-
-static struct pcf50633_bl_platform_data gta02_backlight_data = {
-	.default_brightness = 0x3f,
-	.default_brightness_limit = 0,
-	.ramp_time = 5,
-};
-
-static struct pcf50633_platform_data gta02_pcf_pdata = {
-	.resumers = {
-		[0] =	PCF50633_INT1_USBINS |
-			PCF50633_INT1_USBREM |
-			PCF50633_INT1_ALARM,
-		[1] =	PCF50633_INT2_ONKEYF,
-		[2] =	PCF50633_INT3_ONKEY1S,
-		[3] =	PCF50633_INT4_LOWSYS |
-			PCF50633_INT4_LOWBAT |
-			PCF50633_INT4_HIGHTMP,
-	},
-
-	.batteries = gta02_batteries,
-	.num_batteries = ARRAY_SIZE(gta02_batteries),
-
-	.charger_reference_current_ma = 1000,
-
-	.backlight_data = &gta02_backlight_data,
-
-	.reg_init_data = {
-		[PCF50633_REGULATOR_AUTO] = {
-			.constraints = {
-				.min_uV = 3300000,
-				.max_uV = 3300000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.always_on = 1,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_DOWN1] = {
-			.constraints = {
-				.min_uV = 1300000,
-				.max_uV = 1600000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.always_on = 1,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_DOWN2] = {
-			.constraints = {
-				.min_uV = 1800000,
-				.max_uV = 1800000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.apply_uV = 1,
-				.always_on = 1,
-			},
-		},
-		[PCF50633_REGULATOR_HCLDO] = {
-			.constraints = {
-				.min_uV = 2000000,
-				.max_uV = 3300000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-						REGULATOR_CHANGE_STATUS,
-			},
-		},
-		[PCF50633_REGULATOR_LDO1] = {
-			.constraints = {
-				.min_uV = 3300000,
-				.max_uV = 3300000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_LDO2] = {
-			.constraints = {
-				.min_uV = 3300000,
-				.max_uV = 3300000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_LDO3] = {
-			.constraints = {
-				.min_uV = 3000000,
-				.max_uV = 3000000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_LDO4] = {
-			.constraints = {
-				.min_uV = 3200000,
-				.max_uV = 3200000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_LDO5] = {
-			.constraints = {
-				.min_uV = 3000000,
-				.max_uV = 3000000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_LDO6] = {
-			.constraints = {
-				.min_uV = 3000000,
-				.max_uV = 3000000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-			},
-		},
-		[PCF50633_REGULATOR_MEMLDO] = {
-			.constraints = {
-				.min_uV = 1800000,
-				.max_uV = 1800000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-			},
-		},
-
-	},
-	.mbc_event_callback = gta02_pmu_event_callback,
-};
-
-
-/* NOR Flash. */
-
-#define GTA02_FLASH_BASE	0x18000000 /* GCS3 */
-#define GTA02_FLASH_SIZE	0x200000 /* 2MBytes */
-
-static struct physmap_flash_data gta02_nor_flash_data = {
-	.width		= 2,
-};
-
-static struct resource gta02_nor_flash_resource =
-	DEFINE_RES_MEM(GTA02_FLASH_BASE, GTA02_FLASH_SIZE);
-
-static struct platform_device gta02_nor_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &gta02_nor_flash_data,
-	},
-	.resource	= &gta02_nor_flash_resource,
-	.num_resources	= 1,
-};
-
-
-static struct platform_device s3c24xx_pwm_device = {
-	.name		= "s3c24xx_pwm",
-	.num_resources	= 0,
-};
-
-static struct platform_device gta02_dfbmcs320_device = {
-	.name = "dfbmcs320",
-};
-
-static struct i2c_board_info gta02_i2c_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("pcf50633", 0x73),
-		.irq = GTA02_IRQ_PCF50633,
-		.platform_data = &gta02_pcf_pdata,
-	},
-	{
-		I2C_BOARD_INFO("wm8753", 0x1a),
-	},
-};
-
-static struct s3c2410_nand_set __initdata gta02_nand_sets[] = {
-	[0] = {
-		/*
-		 * This name is also hard-coded in the boot loaders, so
-		 * changing it would would require all users to upgrade
-		 * their boot loaders, some of which are stored in a NOR
-		 * that is considered to be immutable.
-		 */
-		.name		= "neo1973-nand",
-		.nr_chips	= 1,
-		.flash_bbt	= 1,
-	},
-};
-
-/*
- * Choose a set of timings derived from S3C@2442B MCP54
- * data sheet (K5D2G13ACM-D075 MCP Memory).
- */
-
-static struct s3c2410_platform_nand __initdata gta02_nand_info = {
-	.tacls		= 0,
-	.twrph0		= 25,
-	.twrph1		= 15,
-	.nr_sets	= ARRAY_SIZE(gta02_nand_sets),
-	.sets		= gta02_nand_sets,
-	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
-};
-
-
-/* Get PMU to set USB current limit accordingly. */
-static struct s3c2410_udc_mach_info gta02_udc_cfg __initdata = {
-	.vbus_draw	= gta02_udc_vbus_draw,
-};
-
-static struct gpiod_lookup_table gta02_udc_gpio_table = {
-	.dev_id = "s3c2410-usbgadget",
-	.table = {
-		GPIO_LOOKUP("GPIOB", 9, "pullup", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/* USB */
-static struct s3c2410_hcd_info gta02_usb_info __initdata = {
-	.port[0]	= {
-		.flags	= S3C_HCDFLG_USED,
-	},
-	.port[1]	= {
-		.flags	= 0,
-	},
-};
-
-/* Touchscreen */
-static struct s3c2410_ts_mach_info gta02_ts_info = {
-	.delay			= 10000,
-	.presc			= 0xff, /* slow as we can go */
-	.oversampling_shift	= 2,
-};
-
-/* Buttons */
-static struct gpio_keys_button gta02_buttons[] = {
-	{
-		.gpio = GTA02_GPIO_AUX_KEY,
-		.code = KEY_PHONE,
-		.desc = "Aux",
-		.type = EV_KEY,
-		.debounce_interval = 100,
-	},
-	{
-		.gpio = GTA02_GPIO_HOLD_KEY,
-		.code = KEY_PAUSE,
-		.desc = "Hold",
-		.type = EV_KEY,
-		.debounce_interval = 100,
-	},
-};
-
-static struct gpio_keys_platform_data gta02_buttons_pdata = {
-	.buttons = gta02_buttons,
-	.nbuttons = ARRAY_SIZE(gta02_buttons),
-};
-
-static struct platform_device gta02_buttons_device = {
-	.name = "gpio-keys",
-	.id = -1,
-	.dev = {
-		.platform_data = &gta02_buttons_pdata,
-	},
-};
-
-static struct gpiod_lookup_table gta02_audio_gpio_table = {
-	.dev_id = "neo1973-audio",
-	.table = {
-		GPIO_LOOKUP("GPIOJ", 2, "amp-shut", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("GPIOJ", 1, "hp", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device gta02_audio = {
-	.name = "neo1973-audio",
-	.id = -1,
-};
-
-static struct gpiod_lookup_table gta02_mmc_gpio_table = {
-	.dev_id = "s3c2410-sdi",
-	.table = {
-		/* bus pins */
-		GPIO_LOOKUP_IDX("GPIOE",  5, "bus", 0, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  6, "bus", 1, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  7, "bus", 2, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  8, "bus", 3, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  9, "bus", 4, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static void __init gta02_map_io(void)
-{
-	s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
-	s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-
-/* These are the guys that don't need to be children of PMU. */
-
-static struct platform_device *gta02_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_wdt,
-	&s3c_device_sdi,
-	&s3c_device_usbgadget,
-	&s3c_device_nand,
-	&gta02_nor_flash,
-	&s3c24xx_pwm_device,
-	&s3c_device_iis,
-	&s3c_device_i2c0,
-	&gta02_dfbmcs320_device,
-	&gta02_buttons_device,
-	&s3c_device_adc,
-	&s3c_device_ts,
-	&gta02_audio,
-};
-
-static void gta02_poweroff(void)
-{
-	pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN, 1, 1);
-}
-
-static void __init gta02_machine_init(void)
-{
-	/* Set the panic callback to turn AUX LED on or off. */
-	panic_blink = gta02_panic_blink;
-
-	s3c_pm_init();
-
-#ifdef CONFIG_CHARGER_PCF50633
-	INIT_DELAYED_WORK(&gta02_charger_work, gta02_charger_worker);
-#endif
-
-	s3c24xx_udc_set_platdata(&gta02_udc_cfg);
-	s3c24xx_ts_set_platdata(&gta02_ts_info);
-	s3c_ohci_set_platdata(&gta02_usb_info);
-	s3c_nand_set_platdata(&gta02_nand_info);
-	s3c_i2c0_set_platdata(NULL);
-
-	i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
-
-	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
-	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
-			      S3C_GPIO_PULL_NONE);
-
-	gpiod_add_lookup_table(&gta02_udc_gpio_table);
-	gpiod_add_lookup_table(&gta02_audio_gpio_table);
-	gpiod_add_lookup_table(&gta02_mmc_gpio_table);
-	platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
-	pm_power_off = gta02_poweroff;
-
-	regulator_has_full_constraints();
-}
-
-static void __init gta02_init_time(void)
-{
-	s3c2442_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-MACHINE_START(NEO1973_GTA02, "GTA02")
-	/* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2442,
-	.map_io		= gta02_map_io,
-	.init_irq	= s3c2442_init_irq,
-	.init_machine	= gta02_machine_init,
-	.init_time	= gta02_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-h1940.c b/arch/arm/mach-s3c/mach-h1940.c
deleted file mode 100644
index 83ac6cfdb1d8..000000000000
--- a/arch/arm/mach-s3c/mach-h1940.c
+++ /dev/null
@@ -1,809 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2003-2005 Simtec Electronics
-//   Ben Dooks <ben@simtec.co.uk>
-//
-// https://www.handhelds.org/projects/h1940.html
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/memblock.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <linux/pda_power.h>
-#include <linux/s3c_adc_battery.h>
-#include <linux/delay.h>
-
-#include <video/platform_lcd.h>
-
-#include <linux/mmc/host.h>
-#include <linux/export.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/mmc-s3cmci.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-
-#include <sound/uda1380.h>
-
-#include <linux/platform_data/fb-s3c2410.h>
-#include "map.h"
-#include "hardware-s3c24xx.h"
-#include "regs-clock.h"
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-
-#include "cpu.h"
-#include "devs.h"
-#include "gpio-cfg.h"
-#include "pm.h"
-
-#include "s3c24xx.h"
-#include "h1940.h"
-
-#define H1940_LATCH		((void __force __iomem *)0xF8000000)
-
-#define H1940_PA_LATCH		S3C2410_CS2
-
-#define H1940_LATCH_BIT(x)	(1 << ((x) + 16 - S3C_GPIO_END))
-
-#define S3C24XX_PLL_MDIV_SHIFT         (12)
-#define S3C24XX_PLL_PDIV_SHIFT         (4)
-#define S3C24XX_PLL_SDIV_SHIFT         (0)
-
-static struct map_desc h1940_iodesc[] __initdata = {
-	[0] = {
-		.virtual	= (unsigned long)H1940_LATCH,
-		.pfn		= __phys_to_pfn(H1940_PA_LATCH),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE
-	},
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg h1940_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x245,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x00,
-	},
-	/* IR port */
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.uart_flags  = UPF_CONS_FLOW,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x43,
-		.ufcon	     = 0x51,
-	}
-};
-
-/* Board control latch control */
-
-static unsigned int latch_state;
-
-static void h1940_latch_control(unsigned int clear, unsigned int set)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	latch_state &= ~clear;
-	latch_state |= set;
-
-	__raw_writel(latch_state, H1940_LATCH);
-
-	local_irq_restore(flags);
-}
-
-static inline int h1940_gpiolib_to_latch(int offset)
-{
-	return 1 << (offset + 16);
-}
-
-static void h1940_gpiolib_latch_set(struct gpio_chip *chip,
-					unsigned offset, int value)
-{
-	int latch_bit = h1940_gpiolib_to_latch(offset);
-
-	h1940_latch_control(value ? 0 : latch_bit,
-		value ? latch_bit : 0);
-}
-
-static int h1940_gpiolib_latch_output(struct gpio_chip *chip,
-					unsigned offset, int value)
-{
-	h1940_gpiolib_latch_set(chip, offset, value);
-	return 0;
-}
-
-static int h1940_gpiolib_latch_get(struct gpio_chip *chip,
-					unsigned offset)
-{
-	return (latch_state >> (offset + 16)) & 1;
-}
-
-static struct gpio_chip h1940_latch_gpiochip = {
-	.base			= H1940_LATCH_GPIO(0),
-	.owner			= THIS_MODULE,
-	.label			= "H1940_LATCH",
-	.ngpio			= 16,
-	.direction_output	= h1940_gpiolib_latch_output,
-	.set			= h1940_gpiolib_latch_set,
-	.get			= h1940_gpiolib_latch_get,
-};
-
-static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
-};
-
-static struct gpiod_lookup_table h1940_udc_gpio_table = {
-	.dev_id = "s3c2410-usbgadget",
-	.table = {
-		GPIO_LOOKUP("GPIOG", 5, "vbus", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("H1940_LATCH", 7, "pullup", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = {
-		.delay = 10000,
-		.presc = 49,
-		.oversampling_shift = 2,
-		.cfg_gpio = s3c24xx_ts_cfg_gpio,
-};
-
-/*
- * Set lcd on or off
- */
-static struct s3c2410fb_display h1940_lcd __initdata = {
-	.lcdcon5=	S3C2410_LCDCON5_FRM565 | \
-			S3C2410_LCDCON5_INVVLINE | \
-			S3C2410_LCDCON5_HWSWP,
-
-	.type =		S3C2410_LCDCON1_TFT,
-	.width =	240,
-	.height =	320,
-	.pixclock =	260000,
-	.xres =		240,
-	.yres =		320,
-	.bpp =		16,
-	.left_margin =	8,
-	.right_margin =	20,
-	.hsync_len =	4,
-	.upper_margin =	8,
-	.lower_margin = 7,
-	.vsync_len =	1,
-};
-
-static struct s3c2410fb_mach_info h1940_fb_info __initdata = {
-	.displays = &h1940_lcd,
-	.num_displays = 1,
-	.default_display = 0,
-
-	.lpcsel =	0x02,
-	.gpccon =	0xaa940659,
-	.gpccon_mask =	0xffffc0f0,
-	.gpccon_reg =	S3C2410_GPCCON,
-	.gpcup =	0x0000ffff,
-	.gpcup_mask =	0xffffffff,
-	.gpcup_reg =	S3C2410_GPCUP,
-	.gpdcon =	0xaa84aaa0,
-	.gpdcon_mask =	0xffffffff,
-	.gpdcon_reg =	S3C2410_GPDCON,
-	.gpdup =	0x0000faff,
-	.gpdup_mask =	0xffffffff,
-	.gpdup_reg =	S3C2410_GPDUP,
-};
-
-static int power_supply_init(struct device *dev)
-{
-	return gpio_request(S3C2410_GPF(2), "cable plugged");
-}
-
-static int h1940_is_ac_online(void)
-{
-	return !gpio_get_value(S3C2410_GPF(2));
-}
-
-static void power_supply_exit(struct device *dev)
-{
-	gpio_free(S3C2410_GPF(2));
-}
-
-static char *h1940_supplicants[] = {
-	"main-battery",
-	"backup-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init			= power_supply_init,
-	.is_ac_online		= h1940_is_ac_online,
-	.exit			= power_supply_exit,
-	.supplied_to		= h1940_supplicants,
-	.num_supplicants	= ARRAY_SIZE(h1940_supplicants),
-};
-
-static struct resource power_supply_resources[] = {
-	[0] = DEFINE_RES_NAMED(IRQ_EINT2, 1, "ac", IORESOURCE_IRQ \
-			| IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE),
-};
-
-static struct platform_device power_supply = {
-	.name		= "pda-power",
-	.id		= -1,
-	.dev		= {
-				.platform_data =
-					&power_supply_info,
-	},
-	.resource	= power_supply_resources,
-	.num_resources	= ARRAY_SIZE(power_supply_resources),
-};
-
-static const struct s3c_adc_bat_thresh bat_lut_noac[] = {
-	{ .volt = 4070, .cur = 162, .level = 100},
-	{ .volt = 4040, .cur = 165, .level = 95},
-	{ .volt = 4016, .cur = 164, .level = 90},
-	{ .volt = 3996, .cur = 166, .level = 85},
-	{ .volt = 3971, .cur = 168, .level = 80},
-	{ .volt = 3951, .cur = 168, .level = 75},
-	{ .volt = 3931, .cur = 170, .level = 70},
-	{ .volt = 3903, .cur = 172, .level = 65},
-	{ .volt = 3886, .cur = 172, .level = 60},
-	{ .volt = 3858, .cur = 176, .level = 55},
-	{ .volt = 3842, .cur = 176, .level = 50},
-	{ .volt = 3818, .cur = 176, .level = 45},
-	{ .volt = 3789, .cur = 180, .level = 40},
-	{ .volt = 3769, .cur = 180, .level = 35},
-	{ .volt = 3749, .cur = 184, .level = 30},
-	{ .volt = 3732, .cur = 184, .level = 25},
-	{ .volt = 3716, .cur = 184, .level = 20},
-	{ .volt = 3708, .cur = 184, .level = 15},
-	{ .volt = 3716, .cur = 96, .level = 10},
-	{ .volt = 3700, .cur = 96, .level = 5},
-	{ .volt = 3684, .cur = 96, .level = 0},
-};
-
-static const struct s3c_adc_bat_thresh bat_lut_acin[] = {
-	{ .volt = 4130, .cur = 0, .level = 100},
-	{ .volt = 3982, .cur = 0, .level = 50},
-	{ .volt = 3854, .cur = 0, .level = 10},
-	{ .volt = 3841, .cur = 0, .level = 0},
-};
-
-static struct gpiod_lookup_table h1940_bat_gpio_table = {
-	.dev_id = "s3c-adc-battery",
-	.table = {
-		/* Charge status S3C2410_GPF(3) */
-		GPIO_LOOKUP("GPIOF", 3, "charge-status", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static int h1940_bat_init(void)
-{
-	int ret;
-
-	ret = gpio_request(H1940_LATCH_SM803_ENABLE, "h1940-charger-enable");
-	if (ret)
-		return ret;
-	gpio_direction_output(H1940_LATCH_SM803_ENABLE, 0);
-
-	return 0;
-
-}
-
-static void h1940_bat_exit(void)
-{
-	gpio_free(H1940_LATCH_SM803_ENABLE);
-}
-
-static void h1940_enable_charger(void)
-{
-	gpio_set_value(H1940_LATCH_SM803_ENABLE, 1);
-}
-
-static void h1940_disable_charger(void)
-{
-	gpio_set_value(H1940_LATCH_SM803_ENABLE, 0);
-}
-
-static struct s3c_adc_bat_pdata h1940_bat_cfg = {
-	.init = h1940_bat_init,
-	.exit = h1940_bat_exit,
-	.enable_charger = h1940_enable_charger,
-	.disable_charger = h1940_disable_charger,
-	.lut_noac = bat_lut_noac,
-	.lut_noac_cnt = ARRAY_SIZE(bat_lut_noac),
-	.lut_acin = bat_lut_acin,
-	.lut_acin_cnt = ARRAY_SIZE(bat_lut_acin),
-	.volt_channel = 0,
-	.current_channel = 1,
-	.volt_mult = 4056,
-	.current_mult = 1893,
-	.internal_impedance = 200,
-	.backup_volt_channel = 3,
-	/* TODO Check backup volt multiplier */
-	.backup_volt_mult = 4056,
-	.backup_volt_min = 0,
-	.backup_volt_max = 4149288
-};
-
-static struct platform_device h1940_battery = {
-	.name             = "s3c-adc-battery",
-	.id               = -1,
-	.dev = {
-		.parent = &s3c_device_adc.dev,
-		.platform_data = &h1940_bat_cfg,
-	},
-};
-
-static DEFINE_SPINLOCK(h1940_blink_spin);
-
-int h1940_led_blink_set(struct gpio_desc *desc, int state,
-	unsigned long *delay_on, unsigned long *delay_off)
-{
-	int blink_gpio, check_gpio1, check_gpio2;
-	int gpio = desc ? desc_to_gpio(desc) : -EINVAL;
-
-	switch (gpio) {
-	case H1940_LATCH_LED_GREEN:
-		blink_gpio = S3C2410_GPA(7);
-		check_gpio1 = S3C2410_GPA(1);
-		check_gpio2 = S3C2410_GPA(3);
-		break;
-	case H1940_LATCH_LED_RED:
-		blink_gpio = S3C2410_GPA(1);
-		check_gpio1 = S3C2410_GPA(7);
-		check_gpio2 = S3C2410_GPA(3);
-		break;
-	default:
-		blink_gpio = S3C2410_GPA(3);
-		check_gpio1 = S3C2410_GPA(1);
-		check_gpio2 = S3C2410_GPA(7);
-		break;
-	}
-
-	if (delay_on && delay_off && !*delay_on && !*delay_off)
-		*delay_on = *delay_off = 500;
-
-	spin_lock(&h1940_blink_spin);
-
-	switch (state) {
-	case GPIO_LED_NO_BLINK_LOW:
-	case GPIO_LED_NO_BLINK_HIGH:
-		if (!gpio_get_value(check_gpio1) &&
-		    !gpio_get_value(check_gpio2))
-			gpio_set_value(H1940_LATCH_LED_FLASH, 0);
-		gpio_set_value(blink_gpio, 0);
-		if (gpio_is_valid(gpio))
-			gpio_set_value(gpio, state);
-		break;
-	case GPIO_LED_BLINK:
-		if (gpio_is_valid(gpio))
-			gpio_set_value(gpio, 0);
-		gpio_set_value(H1940_LATCH_LED_FLASH, 1);
-		gpio_set_value(blink_gpio, 1);
-		break;
-	}
-
-	spin_unlock(&h1940_blink_spin);
-
-	return 0;
-}
-EXPORT_SYMBOL(h1940_led_blink_set);
-
-static struct gpio_led h1940_leds_desc[] = {
-	{
-		.name			= "Green",
-		.default_trigger	= "main-battery-full",
-		.gpio			= H1940_LATCH_LED_GREEN,
-		.retain_state_suspended	= 1,
-	},
-	{
-		.name			= "Red",
-		.default_trigger
-			= "main-battery-charging-blink-full-solid",
-		.gpio			= H1940_LATCH_LED_RED,
-		.retain_state_suspended	= 1,
-	},
-};
-
-static struct gpio_led_platform_data h1940_leds_pdata = {
-	.num_leds	= ARRAY_SIZE(h1940_leds_desc),
-	.leds		= h1940_leds_desc,
-	.gpio_blink_set	= h1940_led_blink_set,
-};
-
-static struct platform_device h1940_device_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-			.platform_data = &h1940_leds_pdata,
-	},
-};
-
-static struct platform_device h1940_device_bluetooth = {
-	.name             = "h1940-bt",
-	.id               = -1,
-};
-
-static void h1940_set_mmc_power(unsigned char power_mode, unsigned short vdd)
-{
-	s3c24xx_mci_def_set_power(power_mode, vdd);
-
-	switch (power_mode) {
-	case MMC_POWER_OFF:
-		gpio_set_value(H1940_LATCH_SD_POWER, 0);
-		break;
-	case MMC_POWER_UP:
-	case MMC_POWER_ON:
-		gpio_set_value(H1940_LATCH_SD_POWER, 1);
-		break;
-	default:
-		break;
-	}
-}
-
-static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = {
-	.set_power     = h1940_set_mmc_power,
-	.ocr_avail     = MMC_VDD_32_33,
-};
-
-static struct gpiod_lookup_table h1940_mmc_gpio_table = {
-	.dev_id = "s3c2410-sdi",
-	.table = {
-		/* Card detect S3C2410_GPF(5) */
-		GPIO_LOOKUP("GPIOF", 5, "cd", GPIO_ACTIVE_LOW),
-		/* Write protect S3C2410_GPH(8) */
-		GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_LOW),
-		/* bus pins */
-		GPIO_LOOKUP_IDX("GPIOE",  5, "bus", 0, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  6, "bus", 1, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  7, "bus", 2, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  8, "bus", 3, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  9, "bus", 4, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table h1940_audio_gpio_table = {
-	.dev_id = "h1940-audio",
-	.table = {
-		GPIO_LOOKUP("H1940_LATCH",
-			    H1940_LATCH_AUDIO_POWER - H1940_LATCH_GPIO(0),
-			    "speaker-power", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("GPIOG", 4, "hp", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device h1940_audio = {
-	.name = "h1940-audio",
-	.id   = -1,
-};
-
-static struct pwm_lookup h1940_pwm_lookup[] = {
-	PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight", NULL, 36296,
-		   PWM_POLARITY_NORMAL),
-};
-
-static int h1940_backlight_init(struct device *dev)
-{
-	gpio_request(S3C2410_GPB(0), "Backlight");
-
-	gpio_direction_output(S3C2410_GPB(0), 0);
-	s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
-	s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
-	gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 1);
-
-	return 0;
-}
-
-static int h1940_backlight_notify(struct device *dev, int brightness)
-{
-	if (!brightness) {
-		gpio_direction_output(S3C2410_GPB(0), 1);
-		gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
-	} else {
-		gpio_direction_output(S3C2410_GPB(0), 0);
-		s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
-		s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
-		gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 1);
-	}
-	return brightness;
-}
-
-static void h1940_backlight_exit(struct device *dev)
-{
-	gpio_direction_output(S3C2410_GPB(0), 1);
-	gpio_set_value(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
-}
-
-
-static struct platform_pwm_backlight_data backlight_data = {
-	.max_brightness = 100,
-	.dft_brightness = 50,
-	.init           = h1940_backlight_init,
-	.notify		= h1940_backlight_notify,
-	.exit           = h1940_backlight_exit,
-};
-
-static struct platform_device h1940_backlight = {
-	.name = "pwm-backlight",
-	.dev  = {
-		.parent = &samsung_device_pwm.dev,
-		.platform_data = &backlight_data,
-	},
-	.id   = -1,
-};
-
-static void h1940_lcd_power_set(struct plat_lcd_data *pd,
-					unsigned int power)
-{
-	int value, retries = 100;
-
-	if (!power) {
-		gpio_set_value(S3C2410_GPC(0), 0);
-		/* wait for 3ac */
-		do {
-			value = gpio_get_value(S3C2410_GPC(6));
-		} while (value && retries--);
-
-		gpio_set_value(H1940_LATCH_LCD_P2, 0);
-		gpio_set_value(H1940_LATCH_LCD_P3, 0);
-		gpio_set_value(H1940_LATCH_LCD_P4, 0);
-
-		gpio_direction_output(S3C2410_GPC(1), 0);
-		gpio_direction_output(S3C2410_GPC(4), 0);
-
-		gpio_set_value(H1940_LATCH_LCD_P1, 0);
-		gpio_set_value(H1940_LATCH_LCD_P0, 0);
-
-		gpio_set_value(S3C2410_GPC(5), 0);
-
-	} else {
-		gpio_set_value(H1940_LATCH_LCD_P0, 1);
-		gpio_set_value(H1940_LATCH_LCD_P1, 1);
-
-		gpio_direction_input(S3C2410_GPC(1));
-		gpio_direction_input(S3C2410_GPC(4));
-		mdelay(10);
-		s3c_gpio_cfgpin(S3C2410_GPC(1), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S3C2410_GPC(4), S3C_GPIO_SFN(2));
-
-		gpio_set_value(S3C2410_GPC(5), 1);
-		gpio_set_value(S3C2410_GPC(0), 1);
-
-		gpio_set_value(H1940_LATCH_LCD_P3, 1);
-		gpio_set_value(H1940_LATCH_LCD_P2, 1);
-		gpio_set_value(H1940_LATCH_LCD_P4, 1);
-	}
-}
-
-static struct plat_lcd_data h1940_lcd_power_data = {
-	.set_power      = h1940_lcd_power_set,
-};
-
-static struct platform_device h1940_lcd_powerdev = {
-	.name                   = "platform-lcd",
-	.dev.parent             = &s3c_device_lcd.dev,
-	.dev.platform_data      = &h1940_lcd_power_data,
-};
-
-static struct uda1380_platform_data uda1380_info = {
-	.gpio_power	= H1940_LATCH_UDA_POWER,
-	.gpio_reset	= S3C2410_GPA(12),
-	.dac_clk	= UDA1380_DAC_CLK_SYSCLK,
-};
-
-static struct i2c_board_info h1940_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("uda1380", 0x1a),
-		.platform_data = &uda1380_info,
-	},
-};
-
-#define DECLARE_BUTTON(p, k, n, w)	\
-	{				\
-		.gpio		= p,	\
-		.code		= k,	\
-		.desc		= n,	\
-		.wakeup		= w,	\
-		.active_low	= 1,	\
-	}
-
-static struct gpio_keys_button h1940_buttons[] = {
-	DECLARE_BUTTON(S3C2410_GPF(0),       KEY_POWER,          "Power", 1),
-	DECLARE_BUTTON(S3C2410_GPF(6),       KEY_ENTER,         "Select", 1),
-	DECLARE_BUTTON(S3C2410_GPF(7),      KEY_RECORD,         "Record", 0),
-	DECLARE_BUTTON(S3C2410_GPG(0),         KEY_F11,       "Calendar", 0),
-	DECLARE_BUTTON(S3C2410_GPG(2),         KEY_F12,       "Contacts", 0),
-	DECLARE_BUTTON(S3C2410_GPG(3),        KEY_MAIL,           "Mail", 0),
-	DECLARE_BUTTON(S3C2410_GPG(6),        KEY_LEFT,     "Left_arrow", 0),
-	DECLARE_BUTTON(S3C2410_GPG(7),    KEY_HOMEPAGE,           "Home", 0),
-	DECLARE_BUTTON(S3C2410_GPG(8),       KEY_RIGHT,    "Right_arrow", 0),
-	DECLARE_BUTTON(S3C2410_GPG(9),          KEY_UP,       "Up_arrow", 0),
-	DECLARE_BUTTON(S3C2410_GPG(10),       KEY_DOWN,     "Down_arrow", 0),
-};
-
-static struct gpio_keys_platform_data h1940_buttons_data = {
-	.buttons	= h1940_buttons,
-	.nbuttons	= ARRAY_SIZE(h1940_buttons),
-};
-
-static struct platform_device h1940_dev_buttons = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data  = &h1940_buttons_data,
-	}
-};
-
-static struct platform_device *h1940_devices[] __initdata = {
-	&h1940_dev_buttons,
-	&s3c_device_ohci,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-	&s3c_device_usbgadget,
-	&h1940_device_leds,
-	&h1940_device_bluetooth,
-	&s3c_device_sdi,
-	&s3c_device_rtc,
-	&samsung_device_pwm,
-	&h1940_backlight,
-	&h1940_lcd_powerdev,
-	&s3c_device_adc,
-	&s3c_device_ts,
-	&power_supply,
-	&h1940_battery,
-	&h1940_audio,
-};
-
-static void __init h1940_map_io(void)
-{
-	s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
-	s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-
-	/* setup PM */
-
-#ifdef CONFIG_PM_H1940
-	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
-#endif
-	s3c_pm_init();
-
-	/* Add latch gpio chip, set latch initial value */
-	h1940_latch_control(0, 0);
-	WARN_ON(gpiochip_add_data(&h1940_latch_gpiochip, NULL));
-}
-
-static void __init h1940_init_time(void)
-{
-	s3c2410_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-/* H1940 and RX3715 need to reserve this for suspend */
-static void __init h1940_reserve(void)
-{
-	memblock_reserve(0x30003000, 0x1000);
-	memblock_reserve(0x30081000, 0x1000);
-}
-
-static void __init h1940_init(void)
-{
-	u32 tmp;
-
-	s3c24xx_fb_set_platdata(&h1940_fb_info);
-	gpiod_add_lookup_table(&h1940_udc_gpio_table);
-	gpiod_add_lookup_table(&h1940_mmc_gpio_table);
-	gpiod_add_lookup_table(&h1940_audio_gpio_table);
-	gpiod_add_lookup_table(&h1940_bat_gpio_table);
-	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
-	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
-			      S3C_GPIO_PULL_NONE);
-	s3c24xx_mci_set_platdata(&h1940_mmc_cfg);
- 	s3c24xx_udc_set_platdata(&h1940_udc_cfg);
-	s3c24xx_ts_set_platdata(&h1940_ts_cfg);
-	s3c_i2c0_set_platdata(NULL);
-
-	/* Turn off suspend on both USB ports, and switch the
-	 * selectable USB port to USB device mode. */
-
-	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
-			      S3C2410_MISCCR_USBSUSPND0 |
-			      S3C2410_MISCCR_USBSUSPND1, 0x0);
-
-	tmp =   (0x78 << S3C24XX_PLL_MDIV_SHIFT)
-	      | (0x02 << S3C24XX_PLL_PDIV_SHIFT)
-	      | (0x03 << S3C24XX_PLL_SDIV_SHIFT);
-	writel(tmp, S3C2410_UPLLCON);
-
-	gpio_request(S3C2410_GPC(0), "LCD power");
-	gpio_request(S3C2410_GPC(1), "LCD power");
-	gpio_request(S3C2410_GPC(4), "LCD power");
-	gpio_request(S3C2410_GPC(5), "LCD power");
-	gpio_request(S3C2410_GPC(6), "LCD power");
-	gpio_request(H1940_LATCH_LCD_P0, "LCD power");
-	gpio_request(H1940_LATCH_LCD_P1, "LCD power");
-	gpio_request(H1940_LATCH_LCD_P2, "LCD power");
-	gpio_request(H1940_LATCH_LCD_P3, "LCD power");
-	gpio_request(H1940_LATCH_LCD_P4, "LCD power");
-	gpio_request(H1940_LATCH_MAX1698_nSHUTDOWN, "LCD power");
-	gpio_direction_output(S3C2410_GPC(0), 0);
-	gpio_direction_output(S3C2410_GPC(1), 0);
-	gpio_direction_output(S3C2410_GPC(4), 0);
-	gpio_direction_output(S3C2410_GPC(5), 0);
-	gpio_direction_input(S3C2410_GPC(6));
-	gpio_direction_output(H1940_LATCH_LCD_P0, 0);
-	gpio_direction_output(H1940_LATCH_LCD_P1, 0);
-	gpio_direction_output(H1940_LATCH_LCD_P2, 0);
-	gpio_direction_output(H1940_LATCH_LCD_P3, 0);
-	gpio_direction_output(H1940_LATCH_LCD_P4, 0);
-	gpio_direction_output(H1940_LATCH_MAX1698_nSHUTDOWN, 0);
-
-	gpio_request(H1940_LATCH_SD_POWER, "SD power");
-	gpio_direction_output(H1940_LATCH_SD_POWER, 0);
-
-	pwm_add_table(h1940_pwm_lookup, ARRAY_SIZE(h1940_pwm_lookup));
-	platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
-
-	gpio_request(S3C2410_GPA(1), "Red LED blink");
-	gpio_request(S3C2410_GPA(3), "Blue LED blink");
-	gpio_request(S3C2410_GPA(7), "Green LED blink");
-	gpio_request(H1940_LATCH_LED_FLASH, "LED blink");
-	gpio_direction_output(S3C2410_GPA(1), 0);
-	gpio_direction_output(S3C2410_GPA(3), 0);
-	gpio_direction_output(S3C2410_GPA(7), 0);
-	gpio_direction_output(H1940_LATCH_LED_FLASH, 0);
-
-	i2c_register_board_info(0, h1940_i2c_devices,
-		ARRAY_SIZE(h1940_i2c_devices));
-}
-
-MACHINE_START(H1940, "IPAQ-H1940")
-	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2410,
-	.map_io		= h1940_map_io,
-	.reserve	= h1940_reserve,
-	.init_irq	= s3c2410_init_irq,
-	.init_machine	= h1940_init,
-	.init_time	= h1940_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-hmt.c b/arch/arm/mach-s3c/mach-hmt.c
deleted file mode 100644
index 49ba16c447aa..000000000000
--- a/arch/arm/mach-s3c/mach-hmt.c
+++ /dev/null
@@ -1,282 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// mach-hmt.c - Platform code for Airgoo HMT
-//
-// Copyright 2009 Peter Korsgaard <jacmet@sunsite.dk>
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/leds.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <video/samsung_fimd.h>
-#include "map.h"
-#include "irqs.h"
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-#include "gpio-samsung.h"
-#include "fb.h"
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-
-#include "devs.h"
-#include "cpu.h"
-
-#include "s3c64xx.h"
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg hmt_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-};
-
-static struct pwm_lookup hmt_pwm_lookup[] = {
-	PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL,
-		   1000000000 / (100 * 256 * 20), PWM_POLARITY_NORMAL),
-};
-
-static int hmt_bl_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(S3C64XX_GPB(4), "lcd backlight enable");
-	if (!ret)
-		ret = gpio_direction_output(S3C64XX_GPB(4), 0);
-
-	return ret;
-}
-
-static int hmt_bl_notify(struct device *dev, int brightness)
-{
-	/*
-	 * translate from CIELUV/CIELAB L*->brightness, E.G. from
-	 * perceived luminance to light output. Assumes range 0..25600
-	 */
-	if (brightness < 0x800) {
-		/* Y = Yn * L / 903.3 */
-		brightness = (100*256 * brightness + 231245/2) / 231245;
-	} else {
-		/* Y = Yn * ((L + 16) / 116 )^3 */
-		int t = (brightness*4 + 16*1024 + 58)/116;
-		brightness = 25 * ((t * t * t + 0x100000/2) / 0x100000);
-	}
-
-	gpio_set_value(S3C64XX_GPB(4), brightness);
-
-	return brightness;
-}
-
-static void hmt_bl_exit(struct device *dev)
-{
-	gpio_free(S3C64XX_GPB(4));
-}
-
-static struct platform_pwm_backlight_data hmt_backlight_data = {
-	.max_brightness	= 100 * 256,
-	.dft_brightness	= 40 * 256,
-	.init		= hmt_bl_init,
-	.notify		= hmt_bl_notify,
-	.exit		= hmt_bl_exit,
-
-};
-
-static struct platform_device hmt_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent	= &samsung_device_pwm.dev,
-		.platform_data = &hmt_backlight_data,
-	},
-};
-
-static struct s3c_fb_pd_win hmt_fb_win0 = {
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-	.xres		= 800,
-	.yres		= 480,
-};
-
-static struct fb_videomode hmt_lcd_timing = {
-	.left_margin	= 8,
-	.right_margin	= 13,
-	.upper_margin	= 7,
-	.lower_margin	= 5,
-	.hsync_len	= 3,
-	.vsync_len	= 1,
-	.xres		= 800,
-	.yres		= 480,
-};
-
-/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
-static struct s3c_fb_platdata hmt_lcd_pdata __initdata = {
-	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
-	.vtiming	= &hmt_lcd_timing,
-	.win[0]		= &hmt_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-};
-
-static struct mtd_partition hmt_nand_part[] = {
-	[0] = {
-		.name	= "uboot",
-		.size	= SZ_512K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "uboot-env1",
-		.size	= SZ_256K,
-		.offset	= SZ_512K,
-	},
-	[2] = {
-		.name	= "uboot-env2",
-		.size	= SZ_256K,
-		.offset	= SZ_512K + SZ_256K,
-	},
-	[3] = {
-		.name	= "kernel",
-		.size	= SZ_2M,
-		.offset	= SZ_1M,
-	},
-	[4] = {
-		.name	= "rootfs",
-		.size	= MTDPART_SIZ_FULL,
-		.offset	= SZ_1M + SZ_2M,
-	},
-};
-
-static struct s3c2410_nand_set hmt_nand_sets[] = {
-	[0] = {
-		.name		= "nand",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(hmt_nand_part),
-		.partitions	= hmt_nand_part,
-	},
-};
-
-static struct s3c2410_platform_nand hmt_nand_info = {
-	.tacls		= 25,
-	.twrph0		= 55,
-	.twrph1		= 40,
-	.nr_sets	= ARRAY_SIZE(hmt_nand_sets),
-	.sets		= hmt_nand_sets,
-	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
-};
-
-static struct gpio_led hmt_leds[] = {
-	{ /* left function keys */
-		.name			= "left:blue",
-		.gpio			= S3C64XX_GPO(12),
-		.default_trigger	= "default-on",
-	},
-	{ /* right function keys - red */
-		.name			= "right:red",
-		.gpio			= S3C64XX_GPO(13),
-	},
-	{ /* right function keys - green */
-		.name			= "right:green",
-		.gpio			= S3C64XX_GPO(14),
-	},
-	{ /* right function keys - blue */
-		.name			= "right:blue",
-		.gpio			= S3C64XX_GPO(15),
-		.default_trigger	= "default-on",
-	},
-};
-
-static struct gpio_led_platform_data hmt_led_data = {
-	.num_leds = ARRAY_SIZE(hmt_leds),
-	.leds = hmt_leds,
-};
-
-static struct platform_device hmt_leds_device = {
-	.name			= "leds-gpio",
-	.id			= -1,
-	.dev.platform_data	= &hmt_led_data,
-};
-
-static struct map_desc hmt_iodesc[] = {};
-
-static struct platform_device *hmt_devices[] __initdata = {
-	&s3c_device_i2c0,
-	&s3c_device_nand,
-	&s3c_device_fb,
-	&s3c_device_ohci,
-	&samsung_device_pwm,
-	&hmt_backlight_device,
-	&hmt_leds_device,
-};
-
-static void __init hmt_map_io(void)
-{
-	s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
-	s3c64xx_set_xtal_freq(12000000);
-	s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
-	s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
-}
-
-static void __init hmt_machine_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	s3c_fb_set_platdata(&hmt_lcd_pdata);
-	s3c_nand_set_platdata(&hmt_nand_info);
-
-	gpio_request(S3C64XX_GPC(7), "usb power");
-	gpio_direction_output(S3C64XX_GPC(7), 0);
-	gpio_request(S3C64XX_GPM(0), "usb power");
-	gpio_direction_output(S3C64XX_GPM(0), 1);
-	gpio_request(S3C64XX_GPK(7), "usb power");
-	gpio_direction_output(S3C64XX_GPK(7), 1);
-	gpio_request(S3C64XX_GPF(13), "usb power");
-	gpio_direction_output(S3C64XX_GPF(13), 1);
-
-	pwm_add_table(hmt_pwm_lookup, ARRAY_SIZE(hmt_pwm_lookup));
-	platform_add_devices(hmt_devices, ARRAY_SIZE(hmt_devices));
-}
-
-MACHINE_START(HMT, "Airgoo-HMT")
-	/* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= S3C64XX_NR_IRQS,
-	.init_irq	= s3c6410_init_irq,
-	.map_io		= hmt_map_io,
-	.init_machine	= hmt_machine_init,
-	.init_time	= s3c64xx_timer_init,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-jive.c b/arch/arm/mach-s3c/mach-jive.c
deleted file mode 100644
index 16859bb3bb13..000000000000
--- a/arch/arm/mach-s3c/mach-jive.c
+++ /dev/null
@@ -1,693 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2007 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// http://armlinux.simtec.co.uk/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/syscore_ops.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-
-#include <video/ili9320.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include "hardware-s3c24xx.h"
-#include "regs-gpio.h"
-#include <linux/platform_data/fb-s3c2410.h>
-#include "gpio-samsung.h"
-
-#include <asm/mach-types.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand-ecc-sw-hamming.h>
-#include <linux/mtd/partitions.h>
-
-#include "gpio-cfg.h"
-#include "devs.h"
-#include "cpu.h"
-#include "pm.h"
-#include <linux/platform_data/usb-s3c2410_udc.h>
-
-#include "s3c24xx.h"
-#include "s3c2412-power.h"
-
-static struct map_desc jive_iodesc[] __initdata = {
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg jive_uartcfgs[] = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	}
-};
-
-/* Jive flash assignment
- *
- * 0x00000000-0x00028000 : uboot
- * 0x00028000-0x0002c000 : uboot env
- * 0x0002c000-0x00030000 : spare
- * 0x00030000-0x00200000 : zimage A
- * 0x00200000-0x01600000 : cramfs A
- * 0x01600000-0x017d0000 : zimage B
- * 0x017d0000-0x02bd0000 : cramfs B
- * 0x02bd0000-0x03fd0000 : yaffs
- */
-static struct mtd_partition __initdata jive_imageA_nand_part[] = {
-
-#ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
-	/* Don't allow access to the bootloader from linux */
-	{
-		.name           = "uboot",
-		.offset         = 0,
-		.size           = (160 * SZ_1K),
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-
-	/* spare */
-        {
-                .name           = "spare",
-                .offset         = (176 * SZ_1K),
-                .size           = (16 * SZ_1K),
-        },
-#endif
-
-	/* booted images */
-        {
-		.name		= "kernel (ro)",
-		.offset		= (192 * SZ_1K),
-		.size		= (SZ_2M) - (192 * SZ_1K),
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-        }, {
-                .name           = "root (ro)",
-                .offset         = (SZ_2M),
-                .size           = (20 * SZ_1M),
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-        },
-
-	/* yaffs */
-	{
-		.name		= "yaffs",
-		.offset		= (44 * SZ_1M),
-		.size		= (20 * SZ_1M),
-	},
-
-	/* bootloader environment */
-	{
-                .name		= "env",
-		.offset		= (160 * SZ_1K),
-		.size		= (16 * SZ_1K),
-	},
-
-	/* upgrade images */
-        {
-		.name		= "zimage",
-		.offset		= (22 * SZ_1M),
-		.size		= (2 * SZ_1M) - (192 * SZ_1K),
-        }, {
-		.name		= "cramfs",
-		.offset		= (24 * SZ_1M) - (192*SZ_1K),
-		.size		= (20 * SZ_1M),
-        },
-};
-
-static struct mtd_partition __initdata jive_imageB_nand_part[] = {
-
-#ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
-	/* Don't allow access to the bootloader from linux */
-	{
-		.name           = "uboot",
-		.offset         = 0,
-		.size           = (160 * SZ_1K),
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-
-	/* spare */
-        {
-                .name           = "spare",
-                .offset         = (176 * SZ_1K),
-                .size           = (16 * SZ_1K),
-        },
-#endif
-
-	/* booted images */
-        {
-		.name           = "kernel (ro)",
-		.offset         = (22 * SZ_1M),
-		.size           = (2 * SZ_1M) - (192 * SZ_1K),
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-        },
-	{
-		.name		= "root (ro)",
-		.offset		= (24 * SZ_1M) - (192 * SZ_1K),
-                .size		= (20 * SZ_1M),
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-
-	/* yaffs */
-	{
-		.name		= "yaffs",
-		.offset		= (44 * SZ_1M),
-		.size		= (20 * SZ_1M),
-        },
-
-	/* bootloader environment */
-	{
-		.name		= "env",
-		.offset		= (160 * SZ_1K),
-		.size		= (16 * SZ_1K),
-	},
-
-	/* upgrade images */
-	{
-		.name		= "zimage",
-		.offset		= (192 * SZ_1K),
-		.size		= (2 * SZ_1M) - (192 * SZ_1K),
-        }, {
-		.name		= "cramfs",
-		.offset		= (2 * SZ_1M),
-		.size		= (20 * SZ_1M),
-        },
-};
-
-static struct s3c2410_nand_set __initdata jive_nand_sets[] = {
-	[0] = {
-		.name           = "flash",
-		.nr_chips       = 1,
-		.nr_partitions  = ARRAY_SIZE(jive_imageA_nand_part),
-		.partitions     = jive_imageA_nand_part,
-	},
-};
-
-static struct s3c2410_platform_nand __initdata jive_nand_info = {
-	/* set taken from osiris nand timings, possibly still conservative */
-	.tacls		= 30,
-	.twrph0		= 55,
-	.twrph1		= 40,
-	.sets		= jive_nand_sets,
-	.nr_sets	= ARRAY_SIZE(jive_nand_sets),
-	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
-};
-
-static int __init jive_mtdset(char *options)
-{
-	struct s3c2410_nand_set *nand = &jive_nand_sets[0];
-	unsigned long set;
-
-	if (options == NULL || options[0] == '\0')
-		return 1;
-
-	if (kstrtoul(options, 10, &set)) {
-		printk(KERN_ERR "failed to parse mtdset=%s\n", options);
-		return 1;
-	}
-
-	switch (set) {
-	case 1:
-		nand->nr_partitions = ARRAY_SIZE(jive_imageB_nand_part);
-		nand->partitions = jive_imageB_nand_part;
-		break;
-	case 0:
-		/* this is already setup in the nand info */
-		break;
-	default:
-		printk(KERN_ERR "Unknown mtd set %ld specified,"
-		       "using default.", set);
-	}
-
-	return 1;
-}
-
-/* parse the mtdset= option given to the kernel command line */
-__setup("mtdset=", jive_mtdset);
-
-/* LCD timing and setup */
-
-#define LCD_XRES	 (240)
-#define LCD_YRES	 (320)
-#define LCD_LEFT_MARGIN  (12)
-#define LCD_RIGHT_MARGIN (12)
-#define LCD_LOWER_MARGIN (12)
-#define LCD_UPPER_MARGIN (12)
-#define LCD_VSYNC	 (2)
-#define LCD_HSYNC	 (2)
-
-#define LCD_REFRESH	 (60)
-
-#define LCD_HTOT (LCD_HSYNC + LCD_LEFT_MARGIN + LCD_XRES + LCD_RIGHT_MARGIN)
-#define LCD_VTOT (LCD_VSYNC + LCD_LOWER_MARGIN + LCD_YRES + LCD_UPPER_MARGIN)
-
-static struct s3c2410fb_display jive_vgg2432a4_display[] = {
-	[0] = {
-		.width		= LCD_XRES,
-		.height		= LCD_YRES,
-		.xres		= LCD_XRES,
-		.yres		= LCD_YRES,
-		.left_margin	= LCD_LEFT_MARGIN,
-		.right_margin	= LCD_RIGHT_MARGIN,
-		.upper_margin	= LCD_UPPER_MARGIN,
-		.lower_margin	= LCD_LOWER_MARGIN,
-		.hsync_len	= LCD_HSYNC,
-		.vsync_len	= LCD_VSYNC,
-
-		.pixclock	= (1000000000000LL /
-				   (LCD_REFRESH * LCD_HTOT * LCD_VTOT)),
-
-		.bpp		= 16,
-		.type		= (S3C2410_LCDCON1_TFT16BPP |
-				   S3C2410_LCDCON1_TFT),
-
-		.lcdcon5	= (S3C2410_LCDCON5_FRM565 |
-				   S3C2410_LCDCON5_INVVLINE |
-				   S3C2410_LCDCON5_INVVFRAME |
-				   S3C2410_LCDCON5_INVVDEN |
-				   S3C2410_LCDCON5_PWREN),
-	},
-};
-
-/* todo - put into gpio header */
-
-#define S3C2410_GPCCON_MASK(x)	(3 << ((x) * 2))
-#define S3C2410_GPDCON_MASK(x)	(3 << ((x) * 2))
-
-static struct s3c2410fb_mach_info jive_lcd_config = {
-	.displays	 = jive_vgg2432a4_display,
-	.num_displays	 = ARRAY_SIZE(jive_vgg2432a4_display),
-	.default_display = 0,
-
-	/* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN
-	 * and disable the pull down resistors on pins we are using for LCD
-	 * data. */
-
-	.gpcup		= (0xf << 1) | (0x3f << 10),
-	.gpcup_reg	= S3C2410_GPCUP,
-
-	.gpccon		= (S3C2410_GPC1_VCLK   | S3C2410_GPC2_VLINE |
-			   S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM |
-			   S3C2410_GPC10_VD2   | S3C2410_GPC11_VD3 |
-			   S3C2410_GPC12_VD4   | S3C2410_GPC13_VD5 |
-			   S3C2410_GPC14_VD6   | S3C2410_GPC15_VD7),
-
-	.gpccon_mask	= (S3C2410_GPCCON_MASK(1)  | S3C2410_GPCCON_MASK(2)  |
-			   S3C2410_GPCCON_MASK(3)  | S3C2410_GPCCON_MASK(4)  |
-			   S3C2410_GPCCON_MASK(10) | S3C2410_GPCCON_MASK(11) |
-			   S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
-			   S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
-
-	.gpccon_reg	= S3C2410_GPCCON,
-
-	.gpdup		= (0x3f << 2) | (0x3f << 10),
-
-	.gpdup_reg	= S3C2410_GPDUP,
-
-	.gpdcon		= (S3C2410_GPD2_VD10  | S3C2410_GPD3_VD11 |
-			   S3C2410_GPD4_VD12  | S3C2410_GPD5_VD13 |
-			   S3C2410_GPD6_VD14  | S3C2410_GPD7_VD15 |
-			   S3C2410_GPD10_VD18 | S3C2410_GPD11_VD19 |
-			   S3C2410_GPD12_VD20 | S3C2410_GPD13_VD21 |
-			   S3C2410_GPD14_VD22 | S3C2410_GPD15_VD23),
-
-	.gpdcon_mask	= (S3C2410_GPDCON_MASK(2)  | S3C2410_GPDCON_MASK(3) |
-			   S3C2410_GPDCON_MASK(4)  | S3C2410_GPDCON_MASK(5) |
-			   S3C2410_GPDCON_MASK(6)  | S3C2410_GPDCON_MASK(7) |
-			   S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
-			   S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
-			   S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
-
-	.gpdcon_reg	= S3C2410_GPDCON,
-};
-
-/* ILI9320 support. */
-
-static void jive_lcm_reset(unsigned int set)
-{
-	printk(KERN_DEBUG "%s(%d)\n", __func__, set);
-
-	gpio_set_value(S3C2410_GPG(13), set);
-}
-
-#undef LCD_UPPER_MARGIN
-#define LCD_UPPER_MARGIN 2
-
-static struct ili9320_platdata jive_lcm_config = {
-	.hsize		= LCD_XRES,
-	.vsize		= LCD_YRES,
-
-	.reset		= jive_lcm_reset,
-	.suspend	= ILI9320_SUSPEND_DEEP,
-
-	.entry_mode	= ILI9320_ENTRYMODE_ID(3) | ILI9320_ENTRYMODE_BGR,
-	.display2	= (ILI9320_DISPLAY2_FP(LCD_UPPER_MARGIN) |
-			   ILI9320_DISPLAY2_BP(LCD_LOWER_MARGIN)),
-	.display3	= 0x0,
-	.display4	= 0x0,
-	.rgb_if1	= (ILI9320_RGBIF1_RIM_RGB18 |
-			   ILI9320_RGBIF1_RM | ILI9320_RGBIF1_CLK_RGBIF),
-	.rgb_if2	= ILI9320_RGBIF2_DPL,
-	.interface2	= 0x0,
-	.interface3	= 0x3,
-	.interface4	= (ILI9320_INTERFACE4_RTNE(16) |
-			   ILI9320_INTERFACE4_DIVE(1)),
-	.interface5	= 0x0,
-	.interface6	= 0x0,
-};
-
-/* LCD SPI support */
-
-static struct spi_gpio_platform_data jive_lcd_spi = {
-	.num_chipselect	= 1,
-};
-
-static struct platform_device jive_device_lcdspi = {
-	.name		= "spi_gpio",
-	.id		= 1,
-	.dev.platform_data = &jive_lcd_spi,
-};
-
-static struct gpiod_lookup_table jive_lcdspi_gpiod_table = {
-	.dev_id         = "spi_gpio",
-	.table          = {
-		GPIO_LOOKUP("GPIOG", 8,
-			    "sck", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("GPIOB", 8,
-			    "mosi", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("GPIOB", 7,
-			    "cs", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/* WM8750 audio code SPI definition */
-
-static struct spi_gpio_platform_data jive_wm8750_spi = {
-	.num_chipselect	= 1,
-};
-
-static struct platform_device jive_device_wm8750 = {
-	.name		= "spi_gpio",
-	.id		= 2,
-	.dev.platform_data = &jive_wm8750_spi,
-};
-
-static struct gpiod_lookup_table jive_wm8750_gpiod_table = {
-	.dev_id         = "spi_gpio",
-	.table          = {
-		GPIO_LOOKUP("GPIOB", 4,
-			    "sck", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("GPIOB", 9,
-			    "mosi", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("GPIOH", 10,
-			    "cs", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/* JIVE SPI devices. */
-
-static struct spi_board_info __initdata jive_spi_devs[] = {
-	[0] = {
-		.modalias	= "VGG2432A4",
-		.bus_num	= 1,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_3,	/* CPOL=1, CPHA=1 */
-		.max_speed_hz	= 100000,
-		.platform_data	= &jive_lcm_config,
-	}, {
-		.modalias	= "WM8750",
-		.bus_num	= 2,
-		.chip_select	= 0,
-		.mode		= SPI_MODE_0,	/* CPOL=0, CPHA=0 */
-		.max_speed_hz	= 100000,
-	},
-};
-
-/* I2C bus and device configuration. */
-
-static struct s3c2410_platform_i2c jive_i2c_cfg __initdata = {
-	.frequency	= 80 * 1000,
-	.flags		= S3C_IICFLG_FILTER,
-	.sda_delay	= 2,
-};
-
-static struct i2c_board_info jive_i2c_devs[] __initdata = {
-	[0] = {
-		I2C_BOARD_INFO("lis302dl", 0x1c),
-		.irq	= IRQ_EINT14,
-	},
-};
-
-/* The platform devices being used. */
-
-static struct platform_device *jive_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_rtc,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_lcd,
-	&jive_device_lcdspi,
-	&jive_device_wm8750,
-	&s3c_device_nand,
-	&s3c_device_usbgadget,
-	&s3c2412_device_dma,
-};
-
-static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
-};
-
-static struct gpiod_lookup_table jive_udc_gpio_table = {
-	.dev_id = "s3c2410-usbgadget",
-	.table = {
-		GPIO_LOOKUP("GPIOG", 1, "vbus", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/* Jive power management device */
-
-#ifdef CONFIG_PM
-static int jive_pm_suspend(void)
-{
-	/* Write the magic value u-boot uses to check for resume into
-	 * the INFORM0 register, and ensure INFORM1 is set to the
-	 * correct address to resume from. */
-
-	__raw_writel(0x2BED, S3C2412_INFORM0);
-	__raw_writel(__pa_symbol(s3c_cpu_resume), S3C2412_INFORM1);
-
-	return 0;
-}
-
-static void jive_pm_resume(void)
-{
-	__raw_writel(0x0, S3C2412_INFORM0);
-}
-
-#else
-#define jive_pm_suspend NULL
-#define jive_pm_resume NULL
-#endif
-
-static struct syscore_ops jive_pm_syscore_ops = {
-	.suspend	= jive_pm_suspend,
-	.resume		= jive_pm_resume,
-};
-
-static void __init jive_map_io(void)
-{
-	s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
-	s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init jive_init_time(void)
-{
-	s3c2412_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-static void jive_power_off(void)
-{
-	printk(KERN_INFO "powering system down...\n");
-
-	gpio_request_one(S3C2410_GPC(5), GPIOF_OUT_INIT_HIGH, NULL);
-	gpio_free(S3C2410_GPC(5));
-}
-
-static void __init jive_machine_init(void)
-{
-	/* register system core operations for managing low level suspend */
-
-	register_syscore_ops(&jive_pm_syscore_ops);
-
-	/* write our sleep configurations for the IO. Pull down all unused
-	 * IO, ensure that we have turned off all peripherals we do not
-	 * need, and configure the ones we do need. */
-
-	/* Port B sleep */
-
-	__raw_writel(S3C2412_SLPCON_IN(0)   |
-		     S3C2412_SLPCON_PULL(1) |
-		     S3C2412_SLPCON_HIGH(2) |
-		     S3C2412_SLPCON_PULL(3) |
-		     S3C2412_SLPCON_PULL(4) |
-		     S3C2412_SLPCON_PULL(5) |
-		     S3C2412_SLPCON_PULL(6) |
-		     S3C2412_SLPCON_HIGH(7) |
-		     S3C2412_SLPCON_PULL(8) |
-		     S3C2412_SLPCON_PULL(9) |
-		     S3C2412_SLPCON_PULL(10), S3C2412_GPBSLPCON);
-
-	/* Port C sleep */
-
-	__raw_writel(S3C2412_SLPCON_PULL(0) |
-		     S3C2412_SLPCON_PULL(1) |
-		     S3C2412_SLPCON_PULL(2) |
-		     S3C2412_SLPCON_PULL(3) |
-		     S3C2412_SLPCON_PULL(4) |
-		     S3C2412_SLPCON_PULL(5) |
-		     S3C2412_SLPCON_LOW(6)  |
-		     S3C2412_SLPCON_PULL(6) |
-		     S3C2412_SLPCON_PULL(7) |
-		     S3C2412_SLPCON_PULL(8) |
-		     S3C2412_SLPCON_PULL(9) |
-		     S3C2412_SLPCON_PULL(10) |
-		     S3C2412_SLPCON_PULL(11) |
-		     S3C2412_SLPCON_PULL(12) |
-		     S3C2412_SLPCON_PULL(13) |
-		     S3C2412_SLPCON_PULL(14) |
-		     S3C2412_SLPCON_PULL(15), S3C2412_GPCSLPCON);
-
-	/* Port D sleep */
-
-	__raw_writel(S3C2412_SLPCON_ALL_PULL, S3C2412_GPDSLPCON);
-
-	/* Port F sleep */
-
-	__raw_writel(S3C2412_SLPCON_LOW(0)  |
-		     S3C2412_SLPCON_LOW(1)  |
-		     S3C2412_SLPCON_LOW(2)  |
-		     S3C2412_SLPCON_EINT(3) |
-		     S3C2412_SLPCON_EINT(4) |
-		     S3C2412_SLPCON_EINT(5) |
-		     S3C2412_SLPCON_EINT(6) |
-		     S3C2412_SLPCON_EINT(7), S3C2412_GPFSLPCON);
-
-	/* Port G sleep */
-
-	__raw_writel(S3C2412_SLPCON_IN(0)    |
-		     S3C2412_SLPCON_IN(1)    |
-		     S3C2412_SLPCON_IN(2)    |
-		     S3C2412_SLPCON_IN(3)    |
-		     S3C2412_SLPCON_IN(4)    |
-		     S3C2412_SLPCON_IN(5)    |
-		     S3C2412_SLPCON_IN(6)    |
-		     S3C2412_SLPCON_IN(7)    |
-		     S3C2412_SLPCON_PULL(8)  |
-		     S3C2412_SLPCON_PULL(9)  |
-		     S3C2412_SLPCON_IN(10)   |
-		     S3C2412_SLPCON_PULL(11) |
-		     S3C2412_SLPCON_PULL(12) |
-		     S3C2412_SLPCON_PULL(13) |
-		     S3C2412_SLPCON_IN(14)   |
-		     S3C2412_SLPCON_PULL(15), S3C2412_GPGSLPCON);
-
-	/* Port H sleep */
-
-	__raw_writel(S3C2412_SLPCON_PULL(0) |
-		     S3C2412_SLPCON_PULL(1) |
-		     S3C2412_SLPCON_PULL(2) |
-		     S3C2412_SLPCON_PULL(3) |
-		     S3C2412_SLPCON_PULL(4) |
-		     S3C2412_SLPCON_PULL(5) |
-		     S3C2412_SLPCON_PULL(6) |
-		     S3C2412_SLPCON_IN(7)   |
-		     S3C2412_SLPCON_IN(8)   |
-		     S3C2412_SLPCON_PULL(9) |
-		     S3C2412_SLPCON_IN(10), S3C2412_GPHSLPCON);
-
-	/* initialise the power management now we've setup everything. */
-
-	s3c_pm_init();
-
-	/** TODO - check that this is after the cmdline option! */
-	s3c_nand_set_platdata(&jive_nand_info);
-
-	gpio_request(S3C2410_GPG(13), "lcm reset");
-	gpio_direction_output(S3C2410_GPG(13), 0);
-
-	gpio_request_one(S3C2410_GPB(6), GPIOF_OUT_INIT_LOW, NULL);
-	gpio_free(S3C2410_GPB(6));
-
-	/* Turn off suspend on both USB ports, and switch the
-	 * selectable USB port to USB device mode. */
-
-	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
-			      S3C2410_MISCCR_USBSUSPND0 |
-			      S3C2410_MISCCR_USBSUSPND1, 0x0);
-
-	s3c24xx_udc_set_platdata(&jive_udc_cfg);
-	s3c24xx_fb_set_platdata(&jive_lcd_config);
-
-	spi_register_board_info(jive_spi_devs, ARRAY_SIZE(jive_spi_devs));
-
-	s3c_i2c0_set_platdata(&jive_i2c_cfg);
-	i2c_register_board_info(0, jive_i2c_devs, ARRAY_SIZE(jive_i2c_devs));
-
-	pm_power_off = jive_power_off;
-
-	gpiod_add_lookup_table(&jive_udc_gpio_table);
-	gpiod_add_lookup_table(&jive_lcdspi_gpiod_table);
-	gpiod_add_lookup_table(&jive_wm8750_gpiod_table);
-	platform_add_devices(jive_devices, ARRAY_SIZE(jive_devices));
-}
-
-MACHINE_START(JIVE, "JIVE")
-	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2412,
-	.init_irq	= s3c2412_init_irq,
-	.map_io		= jive_map_io,
-	.init_machine	= jive_machine_init,
-	.init_time	= jive_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-mini2440.c b/arch/arm/mach-s3c/mach-mini2440.c
deleted file mode 100644
index 283be70ca622..000000000000
--- a/arch/arm/mach-s3c/mach-mini2440.c
+++ /dev/null
@@ -1,804 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com>
-//      Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk>
-//      and modifications by SBZ <sbz@spgui.org> and
-//      Weibing <http://weibing.blogbus.com> and
-//      Michel Pollet <buserror@gmail.com>
-//
-// For product information, visit https://code.google.com/p/mini2440/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/dm9000.h>
-#include <linux/property.h>
-#include <linux/platform_device.h>
-#include <linux/gpio_keys.h>
-#include <linux/i2c.h>
-#include <linux/mmc/host.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/platform_data/fb-s3c2410.h>
-#include <asm/mach-types.h>
-
-#include "regs-gpio.h"
-#include <linux/platform_data/leds-s3c24xx.h>
-#include "irqs.h"
-#include "gpio-samsung.h"
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/mmc-s3cmci.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand-ecc-sw-hamming.h>
-#include <linux/mtd/partitions.h>
-
-#include "gpio-cfg.h"
-#include "devs.h"
-#include "cpu.h"
-
-#include <sound/s3c24xx_uda134x.h>
-
-#include "s3c24xx.h"
-
-#define MACH_MINI2440_DM9K_BASE (S3C2410_CS4 + 0x300)
-
-static struct map_desc mini2440_iodesc[] __initdata = {
-	/* nothing to declare, move along */
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-
-static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport		= 0,
-		.flags		= 0,
-		.ucon		= UCON,
-		.ulcon		= ULCON,
-		.ufcon		= UFCON,
-	},
-	[1] = {
-		.hwport		= 1,
-		.flags		= 0,
-		.ucon		= UCON,
-		.ulcon		= ULCON,
-		.ufcon		= UFCON,
-	},
-	[2] = {
-		.hwport		= 2,
-		.flags		= 0,
-		.ucon		= UCON,
-		.ulcon		= ULCON,
-		.ufcon		= UFCON,
-	},
-};
-
-/* USB device UDC support */
-
-static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = {
-};
-
-static struct gpiod_lookup_table mini2440_udc_gpio_table = {
-	.dev_id = "s3c2410-usbgadget",
-	.table = {
-		GPIO_LOOKUP("GPIOC", 5, "pullup", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/* LCD timing and setup */
-
-/*
- * This macro simplifies the table bellow
- */
-#define _LCD_DECLARE(_clock, _xres, margin_left, margin_right, hsync, \
-			_yres, margin_top, margin_bottom, vsync, refresh) \
-	.width = _xres, \
-	.xres = _xres, \
-	.height = _yres, \
-	.yres = _yres, \
-	.left_margin	= margin_left,	\
-	.right_margin	= margin_right,	\
-	.upper_margin	= margin_top,	\
-	.lower_margin	= margin_bottom,	\
-	.hsync_len	= hsync,	\
-	.vsync_len	= vsync,	\
-	.pixclock	= ((_clock*100000000000LL) /	\
-			   ((refresh) * \
-			   (hsync + margin_left + _xres + margin_right) * \
-			   (vsync + margin_top + _yres + margin_bottom))), \
-	.bpp		= 16,\
-	.type		= (S3C2410_LCDCON1_TFT16BPP |\
-			   S3C2410_LCDCON1_TFT)
-
-static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
-	[0] = {	/* mini2440 + 3.5" TFT + touchscreen */
-		_LCD_DECLARE(
-			7,			/* The 3.5 is quite fast */
-			240, 21, 38, 6,		/* x timing */
-			320, 4, 4, 2,		/* y timing */
-			60),			/* refresh rate */
-		.lcdcon5	= (S3C2410_LCDCON5_FRM565 |
-				   S3C2410_LCDCON5_INVVLINE |
-				   S3C2410_LCDCON5_INVVFRAME |
-				   S3C2410_LCDCON5_INVVDEN |
-				   S3C2410_LCDCON5_PWREN),
-	},
-	[1] = { /* mini2440 + 7" TFT + touchscreen */
-		_LCD_DECLARE(
-			10,			/* the 7" runs slower */
-			800, 40, 40, 48,	/* x timing */
-			480, 29, 3, 3,		/* y timing */
-			50),			/* refresh rate */
-		.lcdcon5	= (S3C2410_LCDCON5_FRM565 |
-				   S3C2410_LCDCON5_INVVLINE |
-				   S3C2410_LCDCON5_INVVFRAME |
-				   S3C2410_LCDCON5_PWREN),
-	},
-	/* The VGA shield can outout at several resolutions. All share
-	 * the same timings, however, anything smaller than 1024x768
-	 * will only be displayed in the top left corner of a 1024x768
-	 * XGA output unless you add optional dip switches to the shield.
-	 * Therefore timings for other resolutions have been omitted here.
-	 */
-	[2] = {
-		_LCD_DECLARE(
-			10,
-			1024, 1, 2, 2,		/* y timing */
-			768, 200, 16, 16,	/* x timing */
-			24),	/* refresh rate, maximum stable,
-				 * tested with the FPGA shield
-				 */
-		.lcdcon5	= (S3C2410_LCDCON5_FRM565 |
-				   S3C2410_LCDCON5_HWSWP),
-	},
-	/* mini2440 + 3.5" TFT (LCD-W35i, LQ035Q1DG06 type) + touchscreen*/
-	[3] = {
-		_LCD_DECLARE(
-			/* clock */
-			7,
-			/* xres, margin_right, margin_left, hsync */
-			320, 68, 66, 4,
-			/* yres, margin_top, margin_bottom, vsync */
-			240, 4, 4, 9,
-			/* refresh rate */
-			60),
-		.lcdcon5	= (S3C2410_LCDCON5_FRM565 |
-				   S3C2410_LCDCON5_INVVDEN |
-				   S3C2410_LCDCON5_INVVFRAME |
-				   S3C2410_LCDCON5_INVVLINE |
-				   S3C2410_LCDCON5_INVVCLK |
-				   S3C2410_LCDCON5_HWSWP),
-	},
-};
-
-/* todo - put into gpio header */
-
-#define S3C2410_GPCCON_MASK(x)	(3 << ((x) * 2))
-#define S3C2410_GPDCON_MASK(x)	(3 << ((x) * 2))
-
-static struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
-	.displays	 = &mini2440_lcd_cfg[0], /* not constant! see init */
-	.num_displays	 = 1,
-	.default_display = 0,
-
-	/* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN
-	 * and disable the pull down resistors on pins we are using for LCD
-	 * data.
-	 */
-
-	.gpcup		= (0xf << 1) | (0x3f << 10),
-
-	.gpccon		= (S3C2410_GPC1_VCLK   | S3C2410_GPC2_VLINE |
-			   S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM |
-			   S3C2410_GPC10_VD2   | S3C2410_GPC11_VD3 |
-			   S3C2410_GPC12_VD4   | S3C2410_GPC13_VD5 |
-			   S3C2410_GPC14_VD6   | S3C2410_GPC15_VD7),
-
-	.gpccon_mask	= (S3C2410_GPCCON_MASK(1)  | S3C2410_GPCCON_MASK(2)  |
-			   S3C2410_GPCCON_MASK(3)  | S3C2410_GPCCON_MASK(4)  |
-			   S3C2410_GPCCON_MASK(10) | S3C2410_GPCCON_MASK(11) |
-			   S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
-			   S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
-
-	.gpccon_reg	= S3C2410_GPCCON,
-	.gpcup_reg	= S3C2410_GPCUP,
-
-	.gpdup		= (0x3f << 2) | (0x3f << 10),
-
-	.gpdcon		= (S3C2410_GPD2_VD10  | S3C2410_GPD3_VD11 |
-			   S3C2410_GPD4_VD12  | S3C2410_GPD5_VD13 |
-			   S3C2410_GPD6_VD14  | S3C2410_GPD7_VD15 |
-			   S3C2410_GPD10_VD18 | S3C2410_GPD11_VD19 |
-			   S3C2410_GPD12_VD20 | S3C2410_GPD13_VD21 |
-			   S3C2410_GPD14_VD22 | S3C2410_GPD15_VD23),
-
-	.gpdcon_mask	= (S3C2410_GPDCON_MASK(2)  | S3C2410_GPDCON_MASK(3) |
-			   S3C2410_GPDCON_MASK(4)  | S3C2410_GPDCON_MASK(5) |
-			   S3C2410_GPDCON_MASK(6)  | S3C2410_GPDCON_MASK(7) |
-			   S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
-			   S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
-			   S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
-
-	.gpdcon_reg	= S3C2410_GPDCON,
-	.gpdup_reg	= S3C2410_GPDUP,
-};
-
-/* MMC/SD  */
-
-static struct s3c24xx_mci_pdata mini2440_mmc_cfg __initdata = {
-	.wprotect_invert	= 1,
-	.set_power		= s3c24xx_mci_def_set_power,
-	.ocr_avail		= MMC_VDD_32_33|MMC_VDD_33_34,
-};
-
-static struct gpiod_lookup_table mini2440_mmc_gpio_table = {
-	.dev_id = "s3c2410-sdi",
-	.table = {
-		/* Card detect S3C2410_GPG(8) */
-		GPIO_LOOKUP("GPIOG", 8, "cd", GPIO_ACTIVE_LOW),
-		/* Write protect S3C2410_GPH(8) */
-		GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_HIGH),
-		/* bus pins */
-		GPIO_LOOKUP_IDX("GPIOE",  5, "bus", 0, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  6, "bus", 1, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  7, "bus", 2, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  8, "bus", 3, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  9, "bus", 4, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/* NAND Flash on MINI2440 board */
-
-static struct mtd_partition mini2440_default_nand_part[] __initdata = {
-	[0] = {
-		.name	= "u-boot",
-		.size	= SZ_256K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "u-boot-env",
-		.size	= SZ_128K,
-		.offset	= SZ_256K,
-	},
-	[2] = {
-		.name	= "kernel",
-		/* 5 megabytes, for a kernel with no modules
-		 * or a uImage with a ramdisk attached
-		 */
-		.size	= 0x00500000,
-		.offset	= SZ_256K + SZ_128K,
-	},
-	[3] = {
-		.name	= "root",
-		.offset	= SZ_256K + SZ_128K + 0x00500000,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct s3c2410_nand_set mini2440_nand_sets[] __initdata = {
-	[0] = {
-		.name		= "nand",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(mini2440_default_nand_part),
-		.partitions	= mini2440_default_nand_part,
-		.flash_bbt	= 1, /* we use u-boot to create a BBT */
-	},
-};
-
-static struct s3c2410_platform_nand mini2440_nand_info __initdata = {
-	.tacls		= 0,
-	.twrph0		= 25,
-	.twrph1		= 15,
-	.nr_sets	= ARRAY_SIZE(mini2440_nand_sets),
-	.sets		= mini2440_nand_sets,
-	.ignore_unset_ecc = 1,
-	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
-};
-
-/* DM9000AEP 10/100 ethernet controller */
-
-static struct resource mini2440_dm9k_resource[] = {
-	[0] = DEFINE_RES_MEM(MACH_MINI2440_DM9K_BASE, 4),
-	[1] = DEFINE_RES_MEM(MACH_MINI2440_DM9K_BASE + 4, 4),
-	[2] = DEFINE_RES_NAMED(IRQ_EINT7, 1, NULL, IORESOURCE_IRQ
-						| IORESOURCE_IRQ_HIGHEDGE),
-};
-
-/*
- * The DM9000 has no eeprom, and it's MAC address is set by
- * the bootloader before starting the kernel.
- */
-static struct dm9000_plat_data mini2440_dm9k_pdata = {
-	.flags		= (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
-};
-
-static struct platform_device mini2440_device_eth = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(mini2440_dm9k_resource),
-	.resource	= mini2440_dm9k_resource,
-	.dev		= {
-		.platform_data	= &mini2440_dm9k_pdata,
-	},
-};
-
-/*  CON5
- *	+--+	 /-----\
- *	|  |    |	|
- *	|  |	|  BAT	|
- *	|  |	 \_____/
- *	|  |
- *	|  |  +----+  +----+
- *	|  |  | K5 |  | K1 |
- *	|  |  +----+  +----+
- *	|  |  +----+  +----+
- *	|  |  | K4 |  | K2 |
- *	|  |  +----+  +----+
- *	|  |  +----+  +----+
- *	|  |  | K6 |  | K3 |
- *	|  |  +----+  +----+
- *	  .....
- */
-static struct gpio_keys_button mini2440_buttons[] = {
-	{
-		.gpio		= S3C2410_GPG(0),		/* K1 */
-		.code		= KEY_F1,
-		.desc		= "Button 1",
-		.active_low	= 1,
-	},
-	{
-		.gpio		= S3C2410_GPG(3),		/* K2 */
-		.code		= KEY_F2,
-		.desc		= "Button 2",
-		.active_low	= 1,
-	},
-	{
-		.gpio		= S3C2410_GPG(5),		/* K3 */
-		.code		= KEY_F3,
-		.desc		= "Button 3",
-		.active_low	= 1,
-	},
-	{
-		.gpio		= S3C2410_GPG(6),		/* K4 */
-		.code		= KEY_POWER,
-		.desc		= "Power",
-		.active_low	= 1,
-	},
-	{
-		.gpio		= S3C2410_GPG(7),		/* K5 */
-		.code		= KEY_F5,
-		.desc		= "Button 5",
-		.active_low	= 1,
-	},
-#if 0
-	/* this pin is also known as TCLK1 and seems to already
-	 * marked as "in use" somehow in the kernel -- possibly wrongly
-	 */
-	{
-		.gpio		= S3C2410_GPG(11),	/* K6 */
-		.code		= KEY_F6,
-		.desc		= "Button 6",
-		.active_low	= 1,
-	},
-#endif
-};
-
-static struct gpio_keys_platform_data mini2440_button_data = {
-	.buttons	= mini2440_buttons,
-	.nbuttons	= ARRAY_SIZE(mini2440_buttons),
-};
-
-static struct platform_device mini2440_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &mini2440_button_data,
-	}
-};
-
-/* LEDS */
-
-static struct gpiod_lookup_table mini2440_led1_gpio_table = {
-	.dev_id = "s3c24xx_led.1",
-	.table = {
-		GPIO_LOOKUP("GPB", 5, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table mini2440_led2_gpio_table = {
-	.dev_id = "s3c24xx_led.2",
-	.table = {
-		GPIO_LOOKUP("GPB", 6, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table mini2440_led3_gpio_table = {
-	.dev_id = "s3c24xx_led.3",
-	.table = {
-		GPIO_LOOKUP("GPB", 7, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table mini2440_led4_gpio_table = {
-	.dev_id = "s3c24xx_led.4",
-	.table = {
-		GPIO_LOOKUP("GPB", 8, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table mini2440_backlight_gpio_table = {
-	.dev_id = "s3c24xx_led.5",
-	.table = {
-		GPIO_LOOKUP("GPG", 4, NULL, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct s3c24xx_led_platdata mini2440_led1_pdata = {
-	.name		= "led1",
-	.def_trigger	= "heartbeat",
-};
-
-static struct s3c24xx_led_platdata mini2440_led2_pdata = {
-	.name		= "led2",
-	.def_trigger	= "nand-disk",
-};
-
-static struct s3c24xx_led_platdata mini2440_led3_pdata = {
-	.name		= "led3",
-	.def_trigger	= "mmc0",
-};
-
-static struct s3c24xx_led_platdata mini2440_led4_pdata = {
-	.name		= "led4",
-	.def_trigger	= "",
-};
-
-static struct s3c24xx_led_platdata mini2440_led_backlight_pdata = {
-	.name		= "backlight",
-	.def_trigger	= "backlight",
-};
-
-static struct platform_device mini2440_led1 = {
-	.name		= "s3c24xx_led",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &mini2440_led1_pdata,
-	},
-};
-
-static struct platform_device mini2440_led2 = {
-	.name		= "s3c24xx_led",
-	.id		= 2,
-	.dev		= {
-		.platform_data	= &mini2440_led2_pdata,
-	},
-};
-
-static struct platform_device mini2440_led3 = {
-	.name		= "s3c24xx_led",
-	.id		= 3,
-	.dev		= {
-		.platform_data	= &mini2440_led3_pdata,
-	},
-};
-
-static struct platform_device mini2440_led4 = {
-	.name		= "s3c24xx_led",
-	.id		= 4,
-	.dev		= {
-		.platform_data	= &mini2440_led4_pdata,
-	},
-};
-
-static struct platform_device mini2440_led_backlight = {
-	.name		= "s3c24xx_led",
-	.id		= 5,
-	.dev		= {
-		.platform_data	= &mini2440_led_backlight_pdata,
-	},
-};
-
-/* AUDIO */
-
-static struct s3c24xx_uda134x_platform_data mini2440_audio_pins = {
-	.l3_clk = S3C2410_GPB(4),
-	.l3_mode = S3C2410_GPB(2),
-	.l3_data = S3C2410_GPB(3),
-	.model = UDA134X_UDA1341
-};
-
-static struct platform_device mini2440_audio = {
-	.name		= "s3c24xx_uda134x",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &mini2440_audio_pins,
-	},
-};
-
-/*
- * I2C devices
- */
-static const struct property_entry mini2440_at24_properties[] = {
-	PROPERTY_ENTRY_U32("pagesize", 16),
-	{ }
-};
-
-static const struct software_node mini2440_at24_node = {
-	.properties = mini2440_at24_properties,
-};
-
-static struct i2c_board_info mini2440_i2c_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("24c08", 0x50),
-		.swnode = &mini2440_at24_node,
-	},
-};
-
-static struct uda134x_platform_data s3c24xx_uda134x = {
-	.l3 = {
-		.gpio_clk = S3C2410_GPB(4),
-		.gpio_data = S3C2410_GPB(3),
-		.gpio_mode = S3C2410_GPB(2),
-		.use_gpios = 1,
-		.data_hold = 1,
-		.data_setup = 1,
-		.clock_high = 1,
-		.mode_hold = 1,
-		.mode = 1,
-		.mode_setup = 1,
-	},
-	.model = UDA134X_UDA1341,
-};
-
-static struct platform_device uda1340_codec = {
-		.name = "uda134x-codec",
-		.id = -1,
-		.dev = {
-			.platform_data	= &s3c24xx_uda134x,
-		},
-};
-
-static struct platform_device *mini2440_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_rtc,
-	&s3c_device_usbgadget,
-	&mini2440_device_eth,
-	&mini2440_led1,
-	&mini2440_led2,
-	&mini2440_led3,
-	&mini2440_led4,
-	&mini2440_button_device,
-	&s3c_device_nand,
-	&s3c_device_sdi,
-	&s3c2440_device_dma,
-	&s3c_device_iis,
-	&uda1340_codec,
-	&mini2440_audio,
-};
-
-static void __init mini2440_map_io(void)
-{
-	s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
-	s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init mini2440_init_time(void)
-{
-	s3c2440_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-/*
- * mini2440_features string
- *
- * t = Touchscreen present
- * b = backlight control
- * c = camera [TODO]
- * 0-9 LCD configuration
- *
- */
-static char mini2440_features_str[12] __initdata = "0tb";
-
-static int __init mini2440_features_setup(char *str)
-{
-	if (str)
-		strscpy(mini2440_features_str, str,
-			sizeof(mini2440_features_str));
-	return 1;
-}
-
-__setup("mini2440=", mini2440_features_setup);
-
-#define FEATURE_SCREEN (1 << 0)
-#define FEATURE_BACKLIGHT (1 << 1)
-#define FEATURE_TOUCH (1 << 2)
-#define FEATURE_CAMERA (1 << 3)
-
-struct mini2440_features_t {
-	int count;
-	int done;
-	int lcd_index;
-	struct platform_device *optional[8];
-};
-
-static void __init mini2440_parse_features(
-		struct mini2440_features_t *features,
-		const char *features_str)
-{
-	const char *fp = features_str;
-
-	features->count = 0;
-	features->done = 0;
-	features->lcd_index = -1;
-
-	while (*fp) {
-		char f = *fp++;
-
-		switch (f) {
-		case '0'...'9':	/* tft screen */
-			if (features->done & FEATURE_SCREEN) {
-				pr_info("MINI2440: '%c' ignored, screen type already set\n",
-					f);
-			} else {
-				int li = f - '0';
-
-				if (li >= ARRAY_SIZE(mini2440_lcd_cfg))
-					pr_info("MINI2440: '%c' out of range LCD mode\n",
-						f);
-				else {
-					features->optional[features->count++] =
-							&s3c_device_lcd;
-					features->lcd_index = li;
-				}
-			}
-			features->done |= FEATURE_SCREEN;
-			break;
-		case 'b':
-			if (features->done & FEATURE_BACKLIGHT)
-				pr_info("MINI2440: '%c' ignored, backlight already set\n",
-					f);
-			else {
-				features->optional[features->count++] =
-						&mini2440_led_backlight;
-			}
-			features->done |= FEATURE_BACKLIGHT;
-			break;
-		case 't':
-			pr_info("MINI2440: '%c' ignored, touchscreen not compiled in\n",
-				f);
-			break;
-		case 'c':
-			if (features->done & FEATURE_CAMERA)
-				pr_info("MINI2440: '%c' ignored, camera already registered\n",
-					f);
-			else
-				features->optional[features->count++] =
-					&s3c_device_camif;
-			features->done |= FEATURE_CAMERA;
-			break;
-		}
-	}
-}
-
-static void __init mini2440_init(void)
-{
-	struct mini2440_features_t features = { 0 };
-	int i;
-
-	pr_info("MINI2440: Option string mini2440=%s\n",
-			mini2440_features_str);
-
-	/* Parse the feature string */
-	mini2440_parse_features(&features, mini2440_features_str);
-
-	/* turn LCD on */
-	s3c_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND);
-
-	/* Turn the backlight early on */
-	WARN_ON(gpio_request_one(S3C2410_GPG(4), GPIOF_OUT_INIT_HIGH, NULL));
-	gpio_free(S3C2410_GPG(4));
-
-	/* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */
-	gpio_request_one(S3C2410_GPB(1), GPIOF_IN, NULL);
-	s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP);
-	gpio_free(S3C2410_GPB(1));
-
-	/* mark the key as input, without pullups (there is one on the board) */
-	for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) {
-		s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP);
-		s3c_gpio_cfgpin(mini2440_buttons[i].gpio, S3C2410_GPIO_INPUT);
-	}
-
-	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
-	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
-			      S3C_GPIO_PULL_NONE);
-
-	if (features.lcd_index != -1) {
-		int li;
-
-		mini2440_fb_info.displays =
-			&mini2440_lcd_cfg[features.lcd_index];
-
-		pr_info("MINI2440: LCD");
-		for (li = 0; li < ARRAY_SIZE(mini2440_lcd_cfg); li++)
-			if (li == features.lcd_index)
-				pr_cont(" [%d:%dx%d]", li,
-					mini2440_lcd_cfg[li].width,
-					mini2440_lcd_cfg[li].height);
-			else
-				pr_cont(" %d:%dx%d", li,
-					mini2440_lcd_cfg[li].width,
-					mini2440_lcd_cfg[li].height);
-		pr_cont("\n");
-		s3c24xx_fb_set_platdata(&mini2440_fb_info);
-	}
-
-	gpiod_add_lookup_table(&mini2440_udc_gpio_table);
-	s3c24xx_udc_set_platdata(&mini2440_udc_cfg);
-	gpiod_add_lookup_table(&mini2440_mmc_gpio_table);
-	s3c24xx_mci_set_platdata(&mini2440_mmc_cfg);
-	s3c_nand_set_platdata(&mini2440_nand_info);
-	s3c_i2c0_set_platdata(NULL);
-
-	i2c_register_board_info(0, mini2440_i2c_devs,
-				ARRAY_SIZE(mini2440_i2c_devs));
-
-	/* Disable pull-up on the LED lines */
-	s3c_gpio_setpull(S3C2410_GPB(5), S3C_GPIO_PULL_NONE);
-	s3c_gpio_setpull(S3C2410_GPB(6), S3C_GPIO_PULL_NONE);
-	s3c_gpio_setpull(S3C2410_GPB(7), S3C_GPIO_PULL_NONE);
-	s3c_gpio_setpull(S3C2410_GPB(8), S3C_GPIO_PULL_NONE);
-	s3c_gpio_setpull(S3C2410_GPG(4), S3C_GPIO_PULL_NONE);
-
-	/* Add lookups for the lines */
-	gpiod_add_lookup_table(&mini2440_led1_gpio_table);
-	gpiod_add_lookup_table(&mini2440_led2_gpio_table);
-	gpiod_add_lookup_table(&mini2440_led3_gpio_table);
-	gpiod_add_lookup_table(&mini2440_led4_gpio_table);
-	gpiod_add_lookup_table(&mini2440_backlight_gpio_table);
-
-	platform_add_devices(mini2440_devices, ARRAY_SIZE(mini2440_devices));
-
-	if (features.count)	/* the optional features */
-		platform_add_devices(features.optional, features.count);
-
-}
-
-
-MACHINE_START(MINI2440, "MINI2440")
-	/* Maintainer: Michel Pollet <buserror@gmail.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2440,
-	.map_io		= mini2440_map_io,
-	.init_machine	= mini2440_init,
-	.init_irq	= s3c2440_init_irq,
-	.init_time	= mini2440_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-mini6410.c b/arch/arm/mach-s3c/mach-mini6410.c
deleted file mode 100644
index 058ae9e8b89f..000000000000
--- a/arch/arm/mach-s3c/mach-mini6410.c
+++ /dev/null
@@ -1,365 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2010 Darius Augulis <augulis.darius@gmail.com>
-// Copyright 2008 Openmoko, Inc.
-// Copyright 2008 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//	http://armlinux.simtec.co.uk/
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/dm9000.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/types.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "map.h"
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-
-#include <linux/soc/samsung/s3c-adc.h>
-#include "cpu.h"
-#include "devs.h"
-#include "fb.h"
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/mmc-sdhci-s3c.h>
-#include "sdhci.h"
-#include <linux/platform_data/touchscreen-s3c2410.h>
-#include "irqs.h"
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-
-#include "s3c64xx.h"
-#include "regs-modem-s3c64xx.h"
-#include "regs-srom-s3c64xx.h"
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg mini6410_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	= 0,
-		.flags	= 0,
-		.ucon	= UCON,
-		.ulcon	= ULCON,
-		.ufcon	= UFCON,
-	},
-	[1] = {
-		.hwport	= 1,
-		.flags	= 0,
-		.ucon	= UCON,
-		.ulcon	= ULCON,
-		.ufcon	= UFCON,
-	},
-	[2] = {
-		.hwport	= 2,
-		.flags	= 0,
-		.ucon	= UCON,
-		.ulcon	= ULCON,
-		.ufcon	= UFCON,
-	},
-	[3] = {
-		.hwport	= 3,
-		.flags	= 0,
-		.ucon	= UCON,
-		.ulcon	= ULCON,
-		.ufcon	= UFCON,
-	},
-};
-
-/* DM9000AEP 10/100 ethernet controller */
-
-static struct resource mini6410_dm9k_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1, 2),
-	[1] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1 + 4, 2),
-	[2] = DEFINE_RES_NAMED(S3C_EINT(7), 1, NULL, IORESOURCE_IRQ \
-					| IORESOURCE_IRQ_HIGHLEVEL),
-};
-
-static struct dm9000_plat_data mini6410_dm9k_pdata = {
-	.flags		= (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
-};
-
-static struct platform_device mini6410_device_eth = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(mini6410_dm9k_resource),
-	.resource	= mini6410_dm9k_resource,
-	.dev		= {
-		.platform_data	= &mini6410_dm9k_pdata,
-	},
-};
-
-static struct mtd_partition mini6410_nand_part[] = {
-	[0] = {
-		.name	= "uboot",
-		.size	= SZ_1M,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "kernel",
-		.size	= SZ_2M,
-		.offset	= SZ_1M,
-	},
-	[2] = {
-		.name	= "rootfs",
-		.size	= MTDPART_SIZ_FULL,
-		.offset	= SZ_1M + SZ_2M,
-	},
-};
-
-static struct s3c2410_nand_set mini6410_nand_sets[] = {
-	[0] = {
-		.name		= "nand",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(mini6410_nand_part),
-		.partitions	= mini6410_nand_part,
-	},
-};
-
-static struct s3c2410_platform_nand mini6410_nand_info = {
-	.tacls		= 25,
-	.twrph0		= 55,
-	.twrph1		= 40,
-	.nr_sets	= ARRAY_SIZE(mini6410_nand_sets),
-	.sets		= mini6410_nand_sets,
-	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
-};
-
-static struct s3c_fb_pd_win mini6410_lcd_type0_fb_win = {
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-	.xres		= 480,
-	.yres		= 272,
-};
-
-static struct fb_videomode mini6410_lcd_type0_timing = {
-	/* 4.3" 480x272 */
-	.left_margin	= 3,
-	.right_margin	= 2,
-	.upper_margin	= 1,
-	.lower_margin	= 1,
-	.hsync_len	= 40,
-	.vsync_len	= 1,
-	.xres		= 480,
-	.yres		= 272,
-};
-
-static struct s3c_fb_pd_win mini6410_lcd_type1_fb_win = {
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-	.xres		= 800,
-	.yres		= 480,
-};
-
-static struct fb_videomode mini6410_lcd_type1_timing = {
-	/* 7.0" 800x480 */
-	.left_margin	= 8,
-	.right_margin	= 13,
-	.upper_margin	= 7,
-	.lower_margin	= 5,
-	.hsync_len	= 3,
-	.vsync_len	= 1,
-	.xres		= 800,
-	.yres		= 480,
-};
-
-static struct s3c_fb_platdata mini6410_lcd_pdata[] __initdata = {
-	{
-		.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
-		.vtiming	= &mini6410_lcd_type0_timing,
-		.win[0]		= &mini6410_lcd_type0_fb_win,
-		.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-		.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	}, {
-		.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
-		.vtiming	= &mini6410_lcd_type1_timing,
-		.win[0]		= &mini6410_lcd_type1_fb_win,
-		.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-		.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	},
-	{ },
-};
-
-static void mini6410_lcd_power_set(struct plat_lcd_data *pd,
-				   unsigned int power)
-{
-	if (power)
-		gpio_direction_output(S3C64XX_GPE(0), 1);
-	else
-		gpio_direction_output(S3C64XX_GPE(0), 0);
-}
-
-static struct plat_lcd_data mini6410_lcd_power_data = {
-	.set_power	= mini6410_lcd_power_set,
-};
-
-static struct platform_device mini6410_lcd_powerdev = {
-	.name			= "platform-lcd",
-	.dev.parent		= &s3c_device_fb.dev,
-	.dev.platform_data	= &mini6410_lcd_power_data,
-};
-
-static struct s3c_sdhci_platdata mini6410_hsmmc1_pdata = {
-	.max_width		= 4,
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= S3C64XX_GPN(10),
-	.ext_cd_gpio_invert	= true,
-};
-
-static struct platform_device *mini6410_devices[] __initdata = {
-	&mini6410_device_eth,
-	&s3c_device_hsmmc0,
-	&s3c_device_hsmmc1,
-	&s3c_device_ohci,
-	&s3c_device_nand,
-	&s3c_device_fb,
-	&mini6410_lcd_powerdev,
-	&s3c_device_adc,
-};
-
-static void __init mini6410_map_io(void)
-{
-	u32 tmp;
-
-	s3c64xx_init_io(NULL, 0);
-	s3c64xx_set_xtal_freq(12000000);
-	s3c24xx_init_uarts(mini6410_uartcfgs, ARRAY_SIZE(mini6410_uartcfgs));
-	s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
-
-	/* set the LCD type */
-	tmp = __raw_readl(S3C64XX_SPCON);
-	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
-	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
-	__raw_writel(tmp, S3C64XX_SPCON);
-
-	/* remove the LCD bypass */
-	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
-	tmp &= ~MIFPCON_LCD_BYPASS;
-	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
-}
-
-/*
- * mini6410_features string
- *
- * 0-9 LCD configuration
- *
- */
-static char mini6410_features_str[12] __initdata = "0";
-
-static int __init mini6410_features_setup(char *str)
-{
-	if (str)
-		strscpy(mini6410_features_str, str,
-			sizeof(mini6410_features_str));
-	return 1;
-}
-
-__setup("mini6410=", mini6410_features_setup);
-
-#define FEATURE_SCREEN (1 << 0)
-
-struct mini6410_features_t {
-	int done;
-	int lcd_index;
-};
-
-static void mini6410_parse_features(
-		struct mini6410_features_t *features,
-		const char *features_str)
-{
-	const char *fp = features_str;
-
-	features->done = 0;
-	features->lcd_index = 0;
-
-	while (*fp) {
-		char f = *fp++;
-
-		switch (f) {
-		case '0'...'9':	/* tft screen */
-			if (features->done & FEATURE_SCREEN) {
-				printk(KERN_INFO "MINI6410: '%c' ignored, "
-					"screen type already set\n", f);
-			} else {
-				int li = f - '0';
-				if (li >= ARRAY_SIZE(mini6410_lcd_pdata))
-					printk(KERN_INFO "MINI6410: '%c' out "
-						"of range LCD mode\n", f);
-				else {
-					features->lcd_index = li;
-				}
-			}
-			features->done |= FEATURE_SCREEN;
-			break;
-		}
-	}
-}
-
-static void __init mini6410_machine_init(void)
-{
-	u32 cs1;
-	struct mini6410_features_t features = { 0 };
-
-	printk(KERN_INFO "MINI6410: Option string mini6410=%s\n",
-			mini6410_features_str);
-
-	/* Parse the feature string */
-	mini6410_parse_features(&features, mini6410_features_str);
-
-	printk(KERN_INFO "MINI6410: selected LCD display is %dx%d\n",
-		mini6410_lcd_pdata[features.lcd_index].win[0]->xres,
-		mini6410_lcd_pdata[features.lcd_index].win[0]->yres);
-
-	s3c_nand_set_platdata(&mini6410_nand_info);
-	s3c_fb_set_platdata(&mini6410_lcd_pdata[features.lcd_index]);
-	s3c_sdhci1_set_platdata(&mini6410_hsmmc1_pdata);
-	s3c64xx_ts_set_platdata(NULL);
-
-	/* configure nCS1 width to 16 bits */
-
-	cs1 = __raw_readl(S3C64XX_SROM_BW) &
-		~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
-	cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
-		(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
-		(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
-			S3C64XX_SROM_BW__NCS1__SHIFT;
-	__raw_writel(cs1, S3C64XX_SROM_BW);
-
-	/* set timing for nCS1 suitable for ethernet chip */
-
-	__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
-		(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
-		(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
-		(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
-		(13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
-		(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
-		(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
-
-	gpio_request(S3C64XX_GPF(15), "LCD power");
-	gpio_request(S3C64XX_GPE(0), "LCD power");
-
-	platform_add_devices(mini6410_devices, ARRAY_SIZE(mini6410_devices));
-}
-
-MACHINE_START(MINI6410, "MINI6410")
-	/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= S3C64XX_NR_IRQS,
-	.init_irq	= s3c6410_init_irq,
-	.map_io		= mini6410_map_io,
-	.init_machine	= mini6410_machine_init,
-	.init_time	= s3c64xx_timer_init,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-n30.c b/arch/arm/mach-s3c/mach-n30.c
deleted file mode 100644
index 90122fc6b2aa..000000000000
--- a/arch/arm/mach-s3c/mach-n30.c
+++ /dev/null
@@ -1,682 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Machine specific code for the Acer n30, Acer N35, Navman PiN 570,
-// Yakumo AlphaX and Airis NC05 PDAs.
-//
-// Copyright (c) 2003-2005 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// Copyright (c) 2005-2008 Christer Weinigel <christer@weinigel.se>
-//
-// There is a wiki with more information about the n30 port at
-// https://handhelds.org/moin/moin.cgi/AcerN30Documentation .
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-#include <linux/gpio_keys.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/input.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/timer.h>
-#include <linux/io.h>
-#include <linux/mmc/host.h>
-
-#include "hardware-s3c24xx.h"
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <linux/platform_data/fb-s3c2410.h>
-#include <linux/platform_data/leds-s3c24xx.h>
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-#include "gpio-cfg.h"
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include "cpu.h"
-#include "devs.h"
-#include <linux/platform_data/mmc-s3cmci.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-
-#include "s3c24xx.h"
-
-static struct map_desc n30_iodesc[] __initdata = {
-	/* nothing here yet */
-};
-
-static struct s3c2410_uartcfg n30_uartcfgs[] = {
-	/* Normal serial port */
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x2c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	/* IR port */
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.uart_flags  = UPF_CONS_FLOW,
-		.ucon	     = 0x2c5,
-		.ulcon	     = 0x43,
-		.ufcon	     = 0x51,
-	},
-	/* On the N30 the bluetooth controller is connected here.
-	 * On the N35 and variants the GPS receiver is connected here. */
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = 0x2c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-};
-
-static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = {
-};
-
-static struct gpiod_lookup_table n30_udc_gpio_table = {
-	.dev_id = "s3c2410-usbgadget",
-	.table = {
-		GPIO_LOOKUP("GPIOG", 1, "vbus", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("GPIOB", 3, "pullup", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct gpio_keys_button n30_buttons[] = {
-	{
-		.gpio		= S3C2410_GPF(0),
-		.code		= KEY_POWER,
-		.desc		= "Power",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPG(9),
-		.code		= KEY_UP,
-		.desc		= "Thumbwheel Up",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPG(8),
-		.code		= KEY_DOWN,
-		.desc		= "Thumbwheel Down",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPG(7),
-		.code		= KEY_ENTER,
-		.desc		= "Thumbwheel Press",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPF(7),
-		.code		= KEY_HOMEPAGE,
-		.desc		= "Home",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPF(6),
-		.code		= KEY_CALENDAR,
-		.desc		= "Calendar",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPF(5),
-		.code		= KEY_ADDRESSBOOK,
-		.desc		= "Contacts",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPF(4),
-		.code		= KEY_MAIL,
-		.desc		= "Mail",
-		.active_low	= 0,
-	},
-};
-
-static struct gpio_keys_platform_data n30_button_data = {
-	.buttons	= n30_buttons,
-	.nbuttons	= ARRAY_SIZE(n30_buttons),
-};
-
-static struct platform_device n30_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &n30_button_data,
-	}
-};
-
-static struct gpio_keys_button n35_buttons[] = {
-	{
-		.gpio		= S3C2410_GPF(0),
-		.code		= KEY_POWER,
-		.type		= EV_PWR,
-		.desc		= "Power",
-		.active_low	= 0,
-		.wakeup		= 1,
-	},
-	{
-		.gpio		= S3C2410_GPG(9),
-		.code		= KEY_UP,
-		.desc		= "Joystick Up",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPG(8),
-		.code		= KEY_DOWN,
-		.desc		= "Joystick Down",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPG(6),
-		.code		= KEY_DOWN,
-		.desc		= "Joystick Left",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPG(5),
-		.code		= KEY_DOWN,
-		.desc		= "Joystick Right",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPG(7),
-		.code		= KEY_ENTER,
-		.desc		= "Joystick Press",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPF(7),
-		.code		= KEY_HOMEPAGE,
-		.desc		= "Home",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPF(6),
-		.code		= KEY_CALENDAR,
-		.desc		= "Calendar",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPF(5),
-		.code		= KEY_ADDRESSBOOK,
-		.desc		= "Contacts",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPF(4),
-		.code		= KEY_MAIL,
-		.desc		= "Mail",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPF(3),
-		.code		= SW_RADIO,
-		.desc		= "GPS Antenna",
-		.active_low	= 0,
-	},
-	{
-		.gpio		= S3C2410_GPG(2),
-		.code		= SW_HEADPHONE_INSERT,
-		.desc		= "Headphone",
-		.active_low	= 0,
-	},
-};
-
-static struct gpio_keys_platform_data n35_button_data = {
-	.buttons	= n35_buttons,
-	.nbuttons	= ARRAY_SIZE(n35_buttons),
-};
-
-static struct platform_device n35_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &n35_button_data,
-	}
-};
-
-/* This is the bluetooth LED on the device. */
-
-static struct gpiod_lookup_table n30_blue_led_gpio_table = {
-	.dev_id = "s3c24xx_led.1",
-	.table = {
-		GPIO_LOOKUP("GPG", 6, NULL, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct s3c24xx_led_platdata n30_blue_led_pdata = {
-	.name		= "blue_led",
-	.def_trigger	= "",
-};
-
-/* This is the blue LED on the device. Originally used to indicate GPS activity
- * by flashing. */
-
-static struct gpiod_lookup_table n35_blue_led_gpio_table = {
-	.dev_id = "s3c24xx_led.1",
-	.table = {
-		GPIO_LOOKUP("GPD", 8, NULL, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct s3c24xx_led_platdata n35_blue_led_pdata = {
-	.name		= "blue_led",
-	.def_trigger	= "",
-};
-
-/* This LED is driven by the battery microcontroller, and is blinking
- * red, blinking green or solid green when the battery is low,
- * charging or full respectively.  By driving GPD9 low, it's possible
- * to force the LED to blink red, so call that warning LED.  */
-
-static struct gpiod_lookup_table n30_warning_led_gpio_table = {
-	.dev_id = "s3c24xx_led.2",
-	.table = {
-		GPIO_LOOKUP("GPD", 9, NULL, GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct s3c24xx_led_platdata n30_warning_led_pdata = {
-	.name		= "warning_led",
-	.def_trigger	= "",
-};
-
-static struct gpiod_lookup_table n35_warning_led_gpio_table = {
-	.dev_id = "s3c24xx_led.2",
-	.table = {
-		GPIO_LOOKUP("GPD", 9, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
-		{ },
-	},
-};
-
-static struct s3c24xx_led_platdata n35_warning_led_pdata = {
-	.name		= "warning_led",
-	.def_trigger	= "",
-};
-
-static struct platform_device n30_blue_led = {
-	.name		= "s3c24xx_led",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &n30_blue_led_pdata,
-	},
-};
-
-static struct platform_device n35_blue_led = {
-	.name		= "s3c24xx_led",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &n35_blue_led_pdata,
-	},
-};
-
-static struct platform_device n30_warning_led = {
-	.name		= "s3c24xx_led",
-	.id		= 2,
-	.dev		= {
-		.platform_data	= &n30_warning_led_pdata,
-	},
-};
-
-static struct platform_device n35_warning_led = {
-	.name		= "s3c24xx_led",
-	.id		= 2,
-	.dev		= {
-		.platform_data	= &n35_warning_led_pdata,
-	},
-};
-
-static struct s3c2410fb_display n30_display __initdata = {
-	.type		= S3C2410_LCDCON1_TFT,
-	.width		= 240,
-	.height		= 320,
-	.pixclock	= 170000,
-
-	.xres		= 240,
-	.yres		= 320,
-	.bpp		= 16,
-	.left_margin	= 3,
-	.right_margin	= 40,
-	.hsync_len	= 40,
-	.upper_margin	= 2,
-	.lower_margin	= 3,
-	.vsync_len	= 2,
-
-	.lcdcon5 = S3C2410_LCDCON5_INVVLINE | S3C2410_LCDCON5_INVVFRAME,
-};
-
-static struct s3c2410fb_mach_info n30_fb_info __initdata = {
-	.displays	= &n30_display,
-	.num_displays	= 1,
-	.default_display = 0,
-	.lpcsel		= 0x06,
-};
-
-static void n30_sdi_set_power(unsigned char power_mode, unsigned short vdd)
-{
-	s3c24xx_mci_def_set_power(power_mode, vdd);
-
-	switch (power_mode) {
-	case MMC_POWER_ON:
-	case MMC_POWER_UP:
-		gpio_set_value(S3C2410_GPG(4), 1);
-		break;
-	case MMC_POWER_OFF:
-	default:
-		gpio_set_value(S3C2410_GPG(4), 0);
-		break;
-	}
-}
-
-static struct s3c24xx_mci_pdata n30_mci_cfg __initdata = {
-	.ocr_avail	= MMC_VDD_32_33,
-	.set_power	= n30_sdi_set_power,
-};
-
-static struct gpiod_lookup_table n30_mci_gpio_table = {
-	.dev_id = "s3c2410-sdi",
-	.table = {
-		/* Card detect S3C2410_GPF(1) */
-		GPIO_LOOKUP("GPIOF", 1, "cd", GPIO_ACTIVE_LOW),
-		/* Write protect S3C2410_GPG(10) */
-		GPIO_LOOKUP("GPIOG", 10, "wp", GPIO_ACTIVE_LOW),
-		{ },
-		/* bus pins */
-		GPIO_LOOKUP_IDX("GPIOE",  5, "bus", 0, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  6, "bus", 1, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  7, "bus", 2, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  8, "bus", 3, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  9, "bus", 4, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
-	},
-};
-
-static struct platform_device *n30_devices[] __initdata = {
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-	&s3c_device_ohci,
-	&s3c_device_rtc,
-	&s3c_device_usbgadget,
-	&s3c_device_sdi,
-	&n30_button_device,
-	&n30_blue_led,
-	&n30_warning_led,
-};
-
-static struct platform_device *n35_devices[] __initdata = {
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-	&s3c_device_rtc,
-	&s3c_device_usbgadget,
-	&s3c_device_sdi,
-	&n35_button_device,
-	&n35_blue_led,
-	&n35_warning_led,
-};
-
-static struct s3c2410_platform_i2c __initdata n30_i2ccfg = {
-	.flags		= 0,
-	.slave_addr	= 0x10,
-	.frequency	= 10*1000,
-};
-
-/* Lots of hardcoded stuff, but it sets up the hardware in a useful
- * state so that we can boot Linux directly from flash. */
-static void __init n30_hwinit(void)
-{
-	/* GPA0-11 special functions -- unknown what they do
-	 * GPA12 N30 special function -- unknown what it does
-	 *       N35/PiN output -- unknown what it does
-	 *
-	 * A12 is nGCS1 on the N30 and an output on the N35/PiN.  I
-	 * don't think it does anything useful on the N30, so I ought
-	 * to make it an output there too since it always driven to 0
-	 * as far as I can tell. */
-	if (machine_is_n30())
-		__raw_writel(0x007fffff, S3C2410_GPACON);
-	if (machine_is_n35())
-		__raw_writel(0x007fefff, S3C2410_GPACON);
-	__raw_writel(0x00000000, S3C2410_GPADAT);
-
-	/* GPB0 TOUT0 backlight level
-	 * GPB1 output 1=backlight on
-	 * GPB2 output IrDA enable 0=transceiver enabled, 1=disabled
-	 * GPB3 output USB D+ pull up 0=disabled, 1=enabled
-	 * GPB4 N30 output -- unknown function
-	 *      N30/PiN GPS control 0=GPS enabled, 1=GPS disabled
-	 * GPB5 output -- unknown function
-	 * GPB6 input -- unknown function
-	 * GPB7 output -- unknown function
-	 * GPB8 output -- probably LCD driver enable
-	 * GPB9 output -- probably LCD VSYNC driver enable
-	 * GPB10 output -- probably LCD HSYNC driver enable
-	 */
-	__raw_writel(0x00154556, S3C2410_GPBCON);
-	__raw_writel(0x00000750, S3C2410_GPBDAT);
-	__raw_writel(0x00000073, S3C2410_GPBUP);
-
-	/* GPC0 input RS232 DCD/DSR/RI
-	 * GPC1 LCD
-	 * GPC2 output RS232 DTR?
-	 * GPC3 input RS232 DCD/DSR/RI
-	 * GPC4 LCD
-	 * GPC5 output 0=NAND write enabled, 1=NAND write protect
-	 * GPC6 input -- unknown function
-	 * GPC7 input charger status 0=charger connected
-	 *      this input can be triggered by power on the USB device
-	 *      port too, but will go back to disconnected soon after.
-	 * GPC8 N30/N35 output -- unknown function, always driven to 1
-	 *      PiN input -- unknown function, always read as 1
-	 *      Make it an input with a pull up for all models.
-	 * GPC9-15 LCD
-	 */
-	__raw_writel(0xaaa80618, S3C2410_GPCCON);
-	__raw_writel(0x0000014c, S3C2410_GPCDAT);
-	__raw_writel(0x0000fef2, S3C2410_GPCUP);
-
-	/* GPD0 input -- unknown function
-	 * GPD1-D7 LCD
-	 * GPD8 N30 output -- unknown function
-	 *      N35/PiN output 1=GPS LED on
-	 * GPD9 output 0=power led blinks red, 1=normal power led function
-	 * GPD10 output -- unknown function
-	 * GPD11-15 LCD drivers
-	 */
-	__raw_writel(0xaa95aaa4, S3C2410_GPDCON);
-	__raw_writel(0x00000601, S3C2410_GPDDAT);
-	__raw_writel(0x0000fbfe, S3C2410_GPDUP);
-
-	/* GPE0-4 I2S audio bus
-	 * GPE5-10 SD/MMC bus
-	 * E11-13 outputs -- unknown function, probably power management
-	 * E14-15 I2C bus connected to the battery controller
-	 */
-	__raw_writel(0xa56aaaaa, S3C2410_GPECON);
-	__raw_writel(0x0000efc5, S3C2410_GPEDAT);
-	__raw_writel(0x0000f81f, S3C2410_GPEUP);
-
-	/* GPF0  input 0=power button pressed
-	 * GPF1  input SD/MMC switch 0=card present
-	 * GPF2  N30 1=reset button pressed (inverted compared to the rest)
-	 *	 N35/PiN 0=reset button pressed
-	 * GPF3  N30/PiN input -- unknown function
-	 *       N35 input GPS antenna position, 0=antenna closed, 1=open
-	 * GPF4  input 0=button 4 pressed
-	 * GPF5  input 0=button 3 pressed
-	 * GPF6  input 0=button 2 pressed
-	 * GPF7  input 0=button 1 pressed
-	 */
-	__raw_writel(0x0000aaaa, S3C2410_GPFCON);
-	__raw_writel(0x00000000, S3C2410_GPFDAT);
-	__raw_writel(0x000000ff, S3C2410_GPFUP);
-
-	/* GPG0  input RS232 DCD/DSR/RI
-	 * GPG1  input 1=USB gadget port has power from a host
-	 * GPG2  N30 input -- unknown function
-	 *       N35/PiN input 0=headphones plugged in, 1=not plugged in
-	 * GPG3  N30 output -- unknown function
-	 *       N35/PiN input with unknown function
-	 * GPG4  N30 output 0=MMC enabled, 1=MMC disabled
-	 * GPG5  N30 output 0=BlueTooth chip disabled, 1=enabled
-	 *       N35/PiN input joystick right
-	 * GPG6  N30 output 0=blue led on, 1=off
-	 *       N35/PiN input joystick left
-	 * GPG7  input 0=thumbwheel pressed
-	 * GPG8  input 0=thumbwheel down
-	 * GPG9  input 0=thumbwheel up
-	 * GPG10 input SD/MMC write protect switch
-	 * GPG11 N30 input -- unknown function
-	 *       N35 output 0=GPS antenna powered, 1=not powered
-	 *       PiN output -- unknown function
-	 * GPG12-15 touch screen functions
-	 *
-	 * The pullups differ between the models, so enable all
-	 * pullups that are enabled on any of the models.
-	 */
-	if (machine_is_n30())
-		__raw_writel(0xff0a956a, S3C2410_GPGCON);
-	if (machine_is_n35())
-		__raw_writel(0xff4aa92a, S3C2410_GPGCON);
-	__raw_writel(0x0000e800, S3C2410_GPGDAT);
-	__raw_writel(0x0000f86f, S3C2410_GPGUP);
-
-	/* GPH0/1/2/3 RS232 serial port
-	 * GPH4/5 IrDA serial port
-	 * GPH6/7  N30 BlueTooth serial port
-	 *         N35/PiN GPS receiver
-	 * GPH8 input -- unknown function
-	 * GPH9 CLKOUT0 HCLK -- unknown use
-	 * GPH10 CLKOUT1 FCLK -- unknown use
-	 *
-	 * The pull ups for H6/H7 are enabled on N30 but not on the
-	 * N35/PiN.  I suppose is useful for a budget model of the N30
-	 * with no bluetooth.  It doesn't hurt to have the pull ups
-	 * enabled on the N35, so leave them enabled for all models.
-	 */
-	__raw_writel(0x0028aaaa, S3C2410_GPHCON);
-	__raw_writel(0x000005ef, S3C2410_GPHDAT);
-	__raw_writel(0x0000063f, S3C2410_GPHUP);
-}
-
-static void __init n30_map_io(void)
-{
-	s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc));
-	n30_hwinit();
-	s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init n30_init_time(void)
-{
-	s3c2410_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-/* GPB3 is the line that controls the pull-up for the USB D+ line */
-
-static void __init n30_init(void)
-{
-	WARN_ON(gpio_request(S3C2410_GPG(4), "mmc power"));
-
-	s3c24xx_fb_set_platdata(&n30_fb_info);
-	gpiod_add_lookup_table(&n30_udc_gpio_table);
-	s3c24xx_udc_set_platdata(&n30_udc_cfg);
-	gpiod_add_lookup_table(&n30_mci_gpio_table);
-	s3c24xx_mci_set_platdata(&n30_mci_cfg);
-	s3c_i2c0_set_platdata(&n30_i2ccfg);
-
-	/* Turn off suspend on both USB ports, and switch the
-	 * selectable USB port to USB device mode. */
-
-	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
-			      S3C2410_MISCCR_USBSUSPND0 |
-			      S3C2410_MISCCR_USBSUSPND1, 0x0);
-
-	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
-	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
-			      S3C_GPIO_PULL_NONE);
-
-	if (machine_is_n30()) {
-		/* Turn off suspend on both USB ports, and switch the
-		 * selectable USB port to USB device mode. */
-		s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
-				      S3C2410_MISCCR_USBSUSPND0 |
-				      S3C2410_MISCCR_USBSUSPND1, 0x0);
-
-		/* Disable pull-up and add GPIO tables */
-		s3c_gpio_setpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE);
-		s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
-		gpiod_add_lookup_table(&n30_blue_led_gpio_table);
-		gpiod_add_lookup_table(&n30_warning_led_gpio_table);
-
-		platform_add_devices(n30_devices, ARRAY_SIZE(n30_devices));
-	}
-
-	if (machine_is_n35()) {
-		/* Turn off suspend and switch the selectable USB port
-		 * to USB device mode.  Turn on suspend for the host
-		 * port since it is not connected on the N35.
-		 *
-		 * Actually, the host port is available at some pads
-		 * on the back of the device, so it would actually be
-		 * possible to add a USB device inside the N35 if you
-		 * are willing to do some hardware modifications. */
-		s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
-				      S3C2410_MISCCR_USBSUSPND0 |
-				      S3C2410_MISCCR_USBSUSPND1,
-				      S3C2410_MISCCR_USBSUSPND0);
-
-		/* Disable pull-up and add GPIO tables */
-		s3c_gpio_setpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE);
-		s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
-		gpiod_add_lookup_table(&n35_blue_led_gpio_table);
-		gpiod_add_lookup_table(&n35_warning_led_gpio_table);
-
-		platform_add_devices(n35_devices, ARRAY_SIZE(n35_devices));
-	}
-}
-
-MACHINE_START(N30, "Acer-N30")
-	/* Maintainer: Christer Weinigel <christer@weinigel.se>,
-				Ben Dooks <ben-linux@fluff.org>
-	*/
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2410,
-	.init_time	= n30_init_time,
-	.init_machine	= n30_init,
-	.init_irq	= s3c2410_init_irq,
-	.map_io		= n30_map_io,
-MACHINE_END
-
-MACHINE_START(N35, "Acer-N35")
-	/* Maintainer: Christer Weinigel <christer@weinigel.se>
-	*/
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2410,
-	.init_time	= n30_init_time,
-	.init_machine	= n30_init,
-	.init_irq	= s3c2410_init_irq,
-	.map_io		= n30_map_io,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-ncp.c b/arch/arm/mach-s3c/mach-ncp.c
deleted file mode 100644
index 1e65f8bce5c4..000000000000
--- a/arch/arm/mach-s3c/mach-ncp.c
+++ /dev/null
@@ -1,100 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2008-2009 Samsung Electronics
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "irqs.h"
-#include "map.h"
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-#include "fb.h"
-
-#include "devs.h"
-#include "cpu.h"
-
-#include "s3c64xx.h"
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg ncp_uartcfgs[] __initdata = {
-	/* REVISIT: NCP uses only serial 1, 2 */
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-};
-
-static struct platform_device *ncp_devices[] __initdata = {
-	&s3c_device_hsmmc1,
-	&s3c_device_i2c0,
-};
-
-static struct map_desc ncp_iodesc[] __initdata = {};
-
-static void __init ncp_map_io(void)
-{
-	s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
-	s3c64xx_set_xtal_freq(12000000);
-	s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
-	s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
-}
-
-static void __init ncp_machine_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-
-	platform_add_devices(ncp_devices, ARRAY_SIZE(ncp_devices));
-}
-
-MACHINE_START(NCP, "NCP")
-	/* Maintainer: Samsung Electronics */
-	.atag_offset	= 0x100,
-	.nr_irqs	= S3C64XX_NR_IRQS,
-	.init_irq	= s3c6410_init_irq,
-	.map_io		= ncp_map_io,
-	.init_machine	= ncp_machine_init,
-	.init_time	= s3c64xx_timer_init,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-nexcoder.c b/arch/arm/mach-s3c/mach-nexcoder.c
deleted file mode 100644
index d17a3fcb7425..000000000000
--- a/arch/arm/mach-s3c/mach-nexcoder.c
+++ /dev/null
@@ -1,162 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// linux/arch/arm/mach-s3c2440/mach-nexcoder.c
-//
-// Copyright (c) 2004 Nex Vision
-//   Guillaume GOURAT <guillaume.gourat@nexvision.tv>
-//
-// Modifications:
-//     15-10-2004 GG  Created initial version
-//     12-03-2005 BJD Updated for release
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mtd/map.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/setup.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-//#include <asm/debug-ll.h>
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include "gpio-cfg.h"
-#include "devs.h"
-#include "cpu.h"
-
-#include "s3c24xx.h"
-
-static struct map_desc nexcoder_iodesc[] __initdata = {
-	/* nothing here yet */
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG12 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg nexcoder_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	}
-};
-
-/* NOR Flash on NexVision NexCoder 2440 board */
-
-static struct resource nexcoder_nor_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2410_CS0, SZ_8M),
-};
-
-static struct map_info nexcoder_nor_map = {
-	.bankwidth = 2,
-};
-
-static struct platform_device nexcoder_device_nor = {
-	.name		= "mtd-flash",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(nexcoder_nor_resource),
-	.resource	= nexcoder_nor_resource,
-	.dev =
-	{
-		.platform_data = &nexcoder_nor_map,
-	}
-};
-
-/* Standard Nexcoder devices */
-
-static struct platform_device *nexcoder_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
- 	&s3c_device_rtc,
-	&s3c_device_camif,
-	&s3c_device_spi0,
-	&s3c_device_spi1,
-	&nexcoder_device_nor,
-};
-
-static void __init nexcoder_sensorboard_init(void)
-{
-	/* Initialize SCCB bus */
-	gpio_request_one(S3C2410_GPE(14), GPIOF_OUT_INIT_HIGH, NULL);
-	gpio_free(S3C2410_GPE(14)); /* IICSCL */
-	gpio_request_one(S3C2410_GPE(15), GPIOF_OUT_INIT_HIGH, NULL);
-	gpio_free(S3C2410_GPE(15)); /* IICSDA */
-
-	/* Power up the sensor board */
-	gpio_request_one(S3C2410_GPF(1), GPIOF_OUT_INIT_HIGH, NULL);
-	gpio_free(S3C2410_GPF(1)); /* CAM_GPIO7 => nLDO_PWRDN */
-	gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_LOW, NULL);
-	gpio_free(S3C2410_GPF(2)); /* CAM_GPIO6 => CAM_PWRDN */
-}
-
-static void __init nexcoder_map_io(void)
-{
-	s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
-	s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-
-	nexcoder_sensorboard_init();
-}
-
-static void __init nexcoder_init_time(void)
-{
-	s3c2440_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-static void __init nexcoder_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-
-	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
-	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
-			      S3C_GPIO_PULL_NONE);
-
-	platform_add_devices(nexcoder_devices, ARRAY_SIZE(nexcoder_devices));
-};
-
-MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
-	/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2440,
-	.map_io		= nexcoder_map_io,
-	.init_machine	= nexcoder_init,
-	.init_irq	= s3c2440_init_irq,
-	.init_time	= nexcoder_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-osiris-dvs.c b/arch/arm/mach-s3c/mach-osiris-dvs.c
deleted file mode 100644
index 2e283aedab65..000000000000
--- a/arch/arm/mach-s3c/mach-osiris-dvs.c
+++ /dev/null
@@ -1,178 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2009 Simtec Electronics
-//	http://armlinux.simtec.co.uk/
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// Simtec Osiris Dynamic Voltage Scaling support.
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/cpufreq.h>
-#include <linux/gpio.h>
-
-#include <linux/mfd/tps65010.h>
-
-#include <linux/soc/samsung/s3c-cpu-freq.h>
-#include "gpio-samsung.h"
-
-#define OSIRIS_GPIO_DVS	S3C2410_GPB(5)
-
-static bool dvs_en;
-
-static void osiris_dvs_tps_setdvs(bool on)
-{
-	unsigned vregs1 = 0, vdcdc2 = 0;
-
-	if (!on) {
-		vdcdc2 = TPS_VCORE_DISCH | TPS_LP_COREOFF;
-		vregs1 = TPS_LDO1_OFF;	/* turn off in low-power mode */
-	}
-
-	dvs_en = on;
-	vdcdc2 |= TPS_VCORE_1_3V | TPS_VCORE_LP_1_0V;
-	vregs1 |= TPS_LDO2_ENABLE | TPS_LDO1_ENABLE;
-
-	tps65010_config_vregs1(vregs1);
-	tps65010_config_vdcdc2(vdcdc2);
-}
-
-static bool is_dvs(struct s3c_freq *f)
-{
-	/* at the moment, we assume ARMCLK = HCLK => DVS */
-	return f->armclk == f->hclk;
-}
-
-/* keep track of current state */
-static bool cur_dvs = false;
-
-static int osiris_dvs_notify(struct notifier_block *nb,
-			      unsigned long val, void *data)
-{
-	struct cpufreq_freqs *cf = data;
-	struct s3c_cpufreq_freqs *freqs = to_s3c_cpufreq(cf);
-	bool old_dvs = is_dvs(&freqs->old);
-	bool new_dvs = is_dvs(&freqs->new);
-	int ret = 0;
-
-	if (!dvs_en)
-		return 0;
-
-	printk(KERN_DEBUG "%s: old %ld,%ld new %ld,%ld\n", __func__,
-	       freqs->old.armclk, freqs->old.hclk,
-	       freqs->new.armclk, freqs->new.hclk);
-
-	switch (val) {
-	case CPUFREQ_PRECHANGE:
-		if ((old_dvs && !new_dvs) ||
-		    (cur_dvs && !new_dvs)) {
-			pr_debug("%s: exiting dvs\n", __func__);
-			cur_dvs = false;
-			gpio_set_value(OSIRIS_GPIO_DVS, 1);
-		}
-		break;
-	case CPUFREQ_POSTCHANGE:
-		if ((!old_dvs && new_dvs) ||
-		    (!cur_dvs && new_dvs)) {
-			pr_debug("entering dvs\n");
-			cur_dvs = true;
-			gpio_set_value(OSIRIS_GPIO_DVS, 0);
-		}
-		break;
-	}
-
-	return ret;
-}
-
-static struct notifier_block osiris_dvs_nb = {
-	.notifier_call	= osiris_dvs_notify,
-};
-
-static int osiris_dvs_probe(struct platform_device *pdev)
-{
-	int ret;
-
-	dev_info(&pdev->dev, "initialising\n");
-
-	ret = gpio_request(OSIRIS_GPIO_DVS, "osiris-dvs");
-	if (ret) {
-		dev_err(&pdev->dev, "cannot claim gpio\n");
-		goto err_nogpio;
-	}
-
-	/* start with dvs disabled */
-	gpio_direction_output(OSIRIS_GPIO_DVS, 1);
-
-	ret = cpufreq_register_notifier(&osiris_dvs_nb,
-					CPUFREQ_TRANSITION_NOTIFIER);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register with cpufreq\n");
-		goto err_nofreq;
-	}
-
-	osiris_dvs_tps_setdvs(true);
-
-	return 0;
-
-err_nofreq:
-	gpio_free(OSIRIS_GPIO_DVS);
-
-err_nogpio:
-	return ret;
-}
-
-static int osiris_dvs_remove(struct platform_device *pdev)
-{
-	dev_info(&pdev->dev, "exiting\n");
-
-	/* disable any current dvs */
-	gpio_set_value(OSIRIS_GPIO_DVS, 1);
-	osiris_dvs_tps_setdvs(false);
-
-	cpufreq_unregister_notifier(&osiris_dvs_nb,
-				    CPUFREQ_TRANSITION_NOTIFIER);
-
-	gpio_free(OSIRIS_GPIO_DVS);
-
-	return 0;
-}
-
-/* the CONFIG_PM block is so small, it isn't worth actually compiling it
- * out if the configuration isn't set. */
-
-static int osiris_dvs_suspend(struct device *dev)
-{
-	gpio_set_value(OSIRIS_GPIO_DVS, 1);
-	osiris_dvs_tps_setdvs(false);
-	cur_dvs = false;
-
-	return 0;
-}
-
-static int osiris_dvs_resume(struct device *dev)
-{
-	osiris_dvs_tps_setdvs(true);
-	return 0;
-}
-
-static const struct dev_pm_ops osiris_dvs_pm = {
-	.suspend	= osiris_dvs_suspend,
-	.resume		= osiris_dvs_resume,
-};
-
-static struct platform_driver osiris_dvs_driver = {
-	.probe		= osiris_dvs_probe,
-	.remove		= osiris_dvs_remove,
-	.driver		= {
-		.name	= "osiris-dvs",
-		.pm	= &osiris_dvs_pm,
-	},
-};
-
-module_platform_driver(osiris_dvs_driver);
-
-MODULE_DESCRIPTION("Simtec OSIRIS DVS support");
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:osiris-dvs");
diff --git a/arch/arm/mach-s3c/mach-osiris.c b/arch/arm/mach-s3c/mach-osiris.c
deleted file mode 100644
index d900d1354de1..000000000000
--- a/arch/arm/mach-s3c/mach-osiris.c
+++ /dev/null
@@ -1,405 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2005-2008 Simtec Electronics
-//	http://armlinux.simtec.co.uk/
-//	Ben Dooks <ben@simtec.co.uk>
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-
-#include <linux/mfd/tps65010.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/irq.h>
-
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand-ecc-sw-hamming.h>
-#include <linux/mtd/partitions.h>
-
-#include "cpu.h"
-#include <linux/soc/samsung/s3c-cpu-freq.h>
-#include "devs.h"
-#include "gpio-cfg.h"
-
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-
-#include "s3c24xx.h"
-#include "osiris.h"
-#include "regs-mem-s3c24xx.h"
-
-/* onboard perihperal map */
-
-static struct map_desc osiris_iodesc[] __initdata = {
-  /* ISA IO areas (may be over-written later) */
-
-  {
-	  .virtual	= (u32)S3C24XX_VA_ISA_BYTE,
-	  .pfn		= __phys_to_pfn(S3C2410_CS5),
-	  .length	= SZ_16M,
-	  .type		= MT_DEVICE,
-  },
-
-  /* CPLD control registers */
-
-  {
-	  .virtual	= (u32)OSIRIS_VA_CTRL0,
-	  .pfn		= __phys_to_pfn(OSIRIS_PA_CTRL0),
-	  .length	= SZ_16K,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)OSIRIS_VA_CTRL1,
-	  .pfn		= __phys_to_pfn(OSIRIS_PA_CTRL1),
-	  .length	= SZ_16K,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)OSIRIS_VA_CTRL2,
-	  .pfn		= __phys_to_pfn(OSIRIS_PA_CTRL2),
-	  .length	= SZ_16K,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)OSIRIS_VA_IDREG,
-	  .pfn		= __phys_to_pfn(OSIRIS_PA_IDREG),
-	  .length	= SZ_16K,
-	  .type		= MT_DEVICE,
-  },
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
-	}
-};
-
-/* NAND Flash on Osiris board */
-
-static int external_map[]   = { 2 };
-static int chip0_map[]      = { 0 };
-static int chip1_map[]      = { 1 };
-
-static struct mtd_partition __initdata osiris_default_nand_part[] = {
-	[0] = {
-		.name	= "Boot Agent",
-		.size	= SZ_16K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "/boot",
-		.size	= SZ_4M - SZ_16K,
-		.offset	= SZ_16K,
-	},
-	[2] = {
-		.name	= "user1",
-		.offset	= SZ_4M,
-		.size	= SZ_32M - SZ_4M,
-	},
-	[3] = {
-		.name	= "user2",
-		.offset	= SZ_32M,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct mtd_partition __initdata osiris_default_nand_part_large[] = {
-	[0] = {
-		.name	= "Boot Agent",
-		.size	= SZ_128K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "/boot",
-		.size	= SZ_4M - SZ_128K,
-		.offset	= SZ_128K,
-	},
-	[2] = {
-		.name	= "user1",
-		.offset	= SZ_4M,
-		.size	= SZ_32M - SZ_4M,
-	},
-	[3] = {
-		.name	= "user2",
-		.offset	= SZ_32M,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-/* the Osiris has 3 selectable slots for nand-flash, the two
- * on-board chip areas, as well as the external slot.
- *
- * Note, there is no current hot-plug support for the External
- * socket.
-*/
-
-static struct s3c2410_nand_set __initdata osiris_nand_sets[] = {
-	[1] = {
-		.name		= "External",
-		.nr_chips	= 1,
-		.nr_map		= external_map,
-		.options	= NAND_SCAN_SILENT_NODEV,
-		.nr_partitions	= ARRAY_SIZE(osiris_default_nand_part),
-		.partitions	= osiris_default_nand_part,
-	},
-	[0] = {
-		.name		= "chip0",
-		.nr_chips	= 1,
-		.nr_map		= chip0_map,
-		.nr_partitions	= ARRAY_SIZE(osiris_default_nand_part),
-		.partitions	= osiris_default_nand_part,
-	},
-	[2] = {
-		.name		= "chip1",
-		.nr_chips	= 1,
-		.nr_map		= chip1_map,
-		.options	= NAND_SCAN_SILENT_NODEV,
-		.nr_partitions	= ARRAY_SIZE(osiris_default_nand_part),
-		.partitions	= osiris_default_nand_part,
-	},
-};
-
-static void osiris_nand_select(struct s3c2410_nand_set *set, int slot)
-{
-	unsigned int tmp;
-
-	slot = set->nr_map[slot] & 3;
-
-	pr_debug("osiris_nand: selecting slot %d (set %p,%p)\n",
-		 slot, set, set->nr_map);
-
-	tmp = __raw_readb(OSIRIS_VA_CTRL0);
-	tmp &= ~OSIRIS_CTRL0_NANDSEL;
-	tmp |= slot;
-
-	pr_debug("osiris_nand: ctrl0 now %02x\n", tmp);
-
-	__raw_writeb(tmp, OSIRIS_VA_CTRL0);
-}
-
-static struct s3c2410_platform_nand __initdata osiris_nand_info = {
-	.tacls		= 25,
-	.twrph0		= 60,
-	.twrph1		= 60,
-	.nr_sets	= ARRAY_SIZE(osiris_nand_sets),
-	.sets		= osiris_nand_sets,
-	.select_chip	= osiris_nand_select,
-	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
-};
-
-/* PCMCIA control and configuration */
-
-static struct resource osiris_pcmcia_resource[] = {
-	[0] = DEFINE_RES_MEM(0x0f000000, SZ_1M),
-	[1] = DEFINE_RES_MEM(0x0c000000, SZ_1M),
-};
-
-static struct platform_device osiris_pcmcia = {
-	.name		= "osiris-pcmcia",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(osiris_pcmcia_resource),
-	.resource	= osiris_pcmcia_resource,
-};
-
-/* Osiris power management device */
-
-#ifdef CONFIG_PM
-static unsigned char pm_osiris_ctrl0;
-
-static int osiris_pm_suspend(void)
-{
-	unsigned int tmp;
-
-	pm_osiris_ctrl0 = __raw_readb(OSIRIS_VA_CTRL0);
-	tmp = pm_osiris_ctrl0 & ~OSIRIS_CTRL0_NANDSEL;
-
-	/* ensure correct NAND slot is selected on resume */
-	if ((pm_osiris_ctrl0 & OSIRIS_CTRL0_BOOT_INT) == 0)
-	        tmp |= 2;
-
-	__raw_writeb(tmp, OSIRIS_VA_CTRL0);
-
-	/* ensure that an nRESET is not generated on resume. */
-	gpio_request_one(S3C2410_GPA(21), GPIOF_OUT_INIT_HIGH, NULL);
-	gpio_free(S3C2410_GPA(21));
-
-	return 0;
-}
-
-static void osiris_pm_resume(void)
-{
-	if (pm_osiris_ctrl0 & OSIRIS_CTRL0_FIX8)
-		__raw_writeb(OSIRIS_CTRL1_FIX8, OSIRIS_VA_CTRL1);
-
-	__raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
-
-	s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
-}
-
-#else
-#define osiris_pm_suspend NULL
-#define osiris_pm_resume NULL
-#endif
-
-static struct syscore_ops osiris_pm_syscore_ops = {
-	.suspend	= osiris_pm_suspend,
-	.resume		= osiris_pm_resume,
-};
-
-/* Link for DVS driver to TPS65011 */
-
-static void osiris_tps_release(struct device *dev)
-{
-	/* static device, do not need to release anything */
-}
-
-static struct platform_device osiris_tps_device = {
-	.name	= "osiris-dvs",
-	.id	= -1,
-	.dev.release = osiris_tps_release,
-};
-
-static int osiris_tps_setup(struct i2c_client *client, void *context)
-{
-	osiris_tps_device.dev.parent = &client->dev;
-	return platform_device_register(&osiris_tps_device);
-}
-
-static int osiris_tps_remove(struct i2c_client *client, void *context)
-{
-	platform_device_unregister(&osiris_tps_device);
-	return 0;
-}
-
-static struct tps65010_board osiris_tps_board = {
-	.base		= -1,	/* GPIO can go anywhere at the moment */
-	.setup		= osiris_tps_setup,
-	.teardown	= osiris_tps_remove,
-};
-
-/* I2C devices fitted. */
-
-static struct i2c_board_info osiris_i2c_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("tps65011", 0x48),
-		.irq	= IRQ_EINT20,
-		.platform_data = &osiris_tps_board,
-	},
-};
-
-/* Standard Osiris devices */
-
-static struct platform_device *osiris_devices[] __initdata = {
-	&s3c2410_device_dclk,
-	&s3c_device_i2c0,
-	&s3c_device_wdt,
-	&s3c_device_nand,
-	&osiris_pcmcia,
-};
-
-static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
-	.refresh	= 7800, /* refresh period is 7.8usec */
-	.auto_io	= 1,
-	.need_io	= 1,
-};
-
-static void __init osiris_map_io(void)
-{
-	unsigned long flags;
-
-	s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
-	s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-
-	/* check for the newer revision boards with large page nand */
-
-	if ((__raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK) >= 4) {
-		printk(KERN_INFO "OSIRIS-B detected (revision %d)\n",
-		       __raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK);
-		osiris_nand_sets[0].partitions = osiris_default_nand_part_large;
-		osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
-	} else {
-		/* write-protect line to the NAND */
-		gpio_request_one(S3C2410_GPA(0), GPIOF_OUT_INIT_HIGH, NULL);
-		gpio_free(S3C2410_GPA(0));
-	}
-
-	/* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
-
-	local_irq_save(flags);
-	__raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON);
-	local_irq_restore(flags);
-}
-
-static void __init osiris_init_time(void)
-{
-	s3c2440_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-static void __init osiris_init(void)
-{
-	register_syscore_ops(&osiris_pm_syscore_ops);
-
-	s3c_i2c0_set_platdata(NULL);
-	s3c_nand_set_platdata(&osiris_nand_info);
-
-	s3c_cpufreq_setboard(&osiris_cpufreq);
-
-	i2c_register_board_info(0, osiris_i2c_devs,
-				ARRAY_SIZE(osiris_i2c_devs));
-
-	platform_add_devices(osiris_devices, ARRAY_SIZE(osiris_devices));
-};
-
-MACHINE_START(OSIRIS, "Simtec-OSIRIS")
-	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2440,
-	.map_io		= osiris_map_io,
-	.init_irq	= s3c2440_init_irq,
-	.init_machine	= osiris_init,
-	.init_time	= osiris_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-otom.c b/arch/arm/mach-s3c/mach-otom.c
deleted file mode 100644
index 3a2db2f58833..000000000000
--- a/arch/arm/mach-s3c/mach-otom.c
+++ /dev/null
@@ -1,124 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2004 Nex Vision
-//   Guillaume GOURAT <guillaume.gourat@nexvision.fr>
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "gpio-samsung.h"
-#include "gpio-cfg.h"
-
-#include "cpu.h"
-#include "devs.h"
-
-#include "s3c24xx.h"
-#include "otom.h"
-
-static struct map_desc otom11_iodesc[] __initdata = {
-  /* Device area */
-	{ (u32)OTOM_VA_CS8900A_BASE, OTOM_PA_CS8900A_BASE, SZ_16M, MT_DEVICE },
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG12 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg otom11_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	/* port 2 is not actually used */
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	}
-};
-
-/* NOR Flash on NexVision OTOM board */
-
-static struct resource otom_nor_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2410_CS0, SZ_4M),
-};
-
-static struct platform_device otom_device_nor = {
-	.name		= "mtd-flash",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(otom_nor_resource),
-	.resource	= otom_nor_resource,
-};
-
-/* Standard OTOM devices */
-
-static struct platform_device *otom11_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
- 	&s3c_device_rtc,
-	&otom_device_nor,
-};
-
-static void __init otom11_map_io(void)
-{
-	s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc));
-	s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init otom11_init_time(void)
-{
-	s3c2410_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-static void __init otom11_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-
-	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
-	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
-			      S3C_GPIO_PULL_NONE);
-	platform_add_devices(otom11_devices, ARRAY_SIZE(otom11_devices));
-}
-
-MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
-	/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2410,
-	.map_io		= otom11_map_io,
-	.init_machine	= otom11_init,
-	.init_irq	= s3c2410_init_irq,
-	.init_time	= otom11_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-qt2410.c b/arch/arm/mach-s3c/mach-qt2410.c
deleted file mode 100644
index 36fe0684a438..000000000000
--- a/arch/arm/mach-s3c/mach-qt2410.c
+++ /dev/null
@@ -1,375 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (C) 2006 by OpenMoko, Inc.
-// Author: Harald Welte <laforge@openmoko.org>
-// All rights reserved.
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand-ecc-sw-hamming.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <linux/platform_data/leds-s3c24xx.h>
-#include <linux/platform_data/fb-s3c2410.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include "gpio-samsung.h"
-
-#include "gpio-cfg.h"
-#include "devs.h"
-#include "cpu.h"
-#include "pm.h"
-
-#include "s3c24xx.h"
-#include "common-smdk-s3c24xx.h"
-
-static struct map_desc qt2410_iodesc[] __initdata = {
-	{ 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE }
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg smdk2410_uartcfgs[] = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	}
-};
-
-/* LCD driver info */
-
-static struct s3c2410fb_display qt2410_lcd_cfg[] __initdata = {
-	{
-		/* Configuration for 640x480 SHARP LQ080V3DG01 */
-		.lcdcon5 = S3C2410_LCDCON5_FRM565 |
-			   S3C2410_LCDCON5_INVVLINE |
-			   S3C2410_LCDCON5_INVVFRAME |
-			   S3C2410_LCDCON5_PWREN |
-			   S3C2410_LCDCON5_HWSWP,
-
-		.type		= S3C2410_LCDCON1_TFT,
-		.width		= 640,
-		.height		= 480,
-
-		.pixclock	= 40000, /* HCLK/4 */
-		.xres		= 640,
-		.yres		= 480,
-		.bpp		= 16,
-		.left_margin	= 44,
-		.right_margin	= 116,
-		.hsync_len	= 96,
-		.upper_margin	= 19,
-		.lower_margin	= 11,
-		.vsync_len	= 15,
-	},
-	{
-		/* Configuration for 480x640 toppoly TD028TTEC1 */
-		.lcdcon5 = S3C2410_LCDCON5_FRM565 |
-			   S3C2410_LCDCON5_INVVLINE |
-			   S3C2410_LCDCON5_INVVFRAME |
-			   S3C2410_LCDCON5_PWREN |
-			   S3C2410_LCDCON5_HWSWP,
-
-		.type		= S3C2410_LCDCON1_TFT,
-		.width		= 480,
-		.height		= 640,
-		.pixclock	= 40000, /* HCLK/4 */
-		.xres		= 480,
-		.yres		= 640,
-		.bpp		= 16,
-		.left_margin	= 8,
-		.right_margin	= 24,
-		.hsync_len	= 8,
-		.upper_margin	= 2,
-		.lower_margin	= 4,
-		.vsync_len	= 2,
-	},
-	{
-		/* Config for 240x320 LCD */
-		.lcdcon5 = S3C2410_LCDCON5_FRM565 |
-			   S3C2410_LCDCON5_INVVLINE |
-			   S3C2410_LCDCON5_INVVFRAME |
-			   S3C2410_LCDCON5_PWREN |
-			   S3C2410_LCDCON5_HWSWP,
-
-		.type		= S3C2410_LCDCON1_TFT,
-		.width		= 240,
-		.height		= 320,
-		.pixclock	= 100000, /* HCLK/10 */
-		.xres		= 240,
-		.yres		= 320,
-		.bpp		= 16,
-		.left_margin	= 13,
-		.right_margin	= 8,
-		.hsync_len	= 4,
-		.upper_margin	= 2,
-		.lower_margin	= 7,
-		.vsync_len	= 4,
-	},
-};
-
-
-static struct s3c2410fb_mach_info qt2410_fb_info __initdata = {
-	.displays 	= qt2410_lcd_cfg,
-	.num_displays 	= ARRAY_SIZE(qt2410_lcd_cfg),
-	.default_display = 0,
-
-	.lpcsel		= ((0xCE6) & ~7) | 1<<4,
-};
-
-/* CS8900 */
-
-static struct resource qt2410_cs89x0_resources[] = {
-	[0] = DEFINE_RES_MEM(0x19000000, 17),
-	[1] = DEFINE_RES_IRQ(IRQ_EINT9),
-};
-
-static struct platform_device qt2410_cs89x0 = {
-	.name		= "cirrus-cs89x0",
-	.num_resources	= ARRAY_SIZE(qt2410_cs89x0_resources),
-	.resource	= qt2410_cs89x0_resources,
-};
-
-/* LED */
-
-static struct gpiod_lookup_table qt2410_led_gpio_table = {
-	.dev_id = "s3c24xx_led.0",
-	.table = {
-		GPIO_LOOKUP("GPB", 0, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
-		{ },
-	},
-};
-
-static struct s3c24xx_led_platdata qt2410_pdata_led = {
-	.name		= "led",
-	.def_trigger	= "timer",
-};
-
-static struct platform_device qt2410_led = {
-	.name		= "s3c24xx_led",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &qt2410_pdata_led,
-	},
-};
-
-/* SPI */
-
-static struct spi_gpio_platform_data spi_gpio_cfg = {
-	.num_chipselect	= 1,
-};
-
-static struct platform_device qt2410_spi = {
-	.name		= "spi_gpio",
-	.id		= 1,
-	.dev.platform_data = &spi_gpio_cfg,
-};
-
-static struct gpiod_lookup_table qt2410_spi_gpiod_table = {
-	.dev_id         = "spi_gpio",
-	.table          = {
-		GPIO_LOOKUP("GPIOG", 7,
-			    "sck", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("GPIOG", 6,
-			    "mosi", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("GPIOG", 5,
-			    "miso", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("GPIOB", 5,
-			    "cs", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table qt2410_mmc_gpiod_table = {
-	.dev_id = "s3c2410-sdi",
-	.table = {
-		/* bus pins */
-		GPIO_LOOKUP_IDX("GPIOE",  5, "bus", 0, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  6, "bus", 1, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  7, "bus", 2, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  8, "bus", 3, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  9, "bus", 4, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/* Board devices */
-
-static struct platform_device *qt2410_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-	&s3c_device_sdi,
-	&s3c_device_usbgadget,
-	&qt2410_spi,
-	&qt2410_cs89x0,
-	&qt2410_led,
-};
-
-static struct mtd_partition __initdata qt2410_nand_part[] = {
-	[0] = {
-		.name	= "U-Boot",
-		.size	= 0x30000,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "U-Boot environment",
-		.offset = 0x30000,
-		.size	= 0x4000,
-	},
-	[2] = {
-		.name	= "kernel",
-		.offset = 0x34000,
-		.size	= SZ_2M,
-	},
-	[3] = {
-		.name	= "initrd",
-		.offset	= 0x234000,
-		.size	= SZ_4M,
-	},
-	[4] = {
-		.name	= "jffs2",
-		.offset = 0x634000,
-		.size	= 0x39cc000,
-	},
-};
-
-static struct s3c2410_nand_set __initdata qt2410_nand_sets[] = {
-	[0] = {
-		.name		= "NAND",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(qt2410_nand_part),
-		.partitions	= qt2410_nand_part,
-	},
-};
-
-/* choose a set of timings which should suit most 512Mbit
- * chips and beyond.
- */
-
-static struct s3c2410_platform_nand __initdata qt2410_nand_info = {
-	.tacls		= 20,
-	.twrph0		= 60,
-	.twrph1		= 20,
-	.nr_sets	= ARRAY_SIZE(qt2410_nand_sets),
-	.sets		= qt2410_nand_sets,
-	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
-};
-
-/* UDC */
-
-static struct s3c2410_udc_mach_info qt2410_udc_cfg = {
-};
-
-static char tft_type = 's';
-
-static int __init qt2410_tft_setup(char *str)
-{
-	tft_type = str[0];
-	return 1;
-}
-
-__setup("tft=", qt2410_tft_setup);
-
-static void __init qt2410_map_io(void)
-{
-	s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
-	s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init qt2410_init_time(void)
-{
-	s3c2410_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-static void __init qt2410_machine_init(void)
-{
-	s3c_nand_set_platdata(&qt2410_nand_info);
-
-	switch (tft_type) {
-	case 'p': /* production */
-		qt2410_fb_info.default_display = 1;
-		break;
-	case 'b': /* big */
-		qt2410_fb_info.default_display = 0;
-		break;
-	case 's': /* small */
-	default:
-		qt2410_fb_info.default_display = 2;
-		break;
-	}
-	s3c24xx_fb_set_platdata(&qt2410_fb_info);
-
-	/* set initial state of the LED GPIO */
-	WARN_ON(gpio_request_one(S3C2410_GPB(0), GPIOF_OUT_INIT_HIGH, NULL));
-	gpio_free(S3C2410_GPB(0));
-
-	s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
-	s3c_i2c0_set_platdata(NULL);
-
-	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
-	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
-			      S3C_GPIO_PULL_NONE);
-	gpiod_add_lookup_table(&qt2410_spi_gpiod_table);
-	s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
-	gpiod_add_lookup_table(&qt2410_led_gpio_table);
-	gpiod_add_lookup_table(&qt2410_mmc_gpiod_table);
-	platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
-	s3c_pm_init();
-}
-
-MACHINE_START(QT2410, "QT2410")
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2410,
-	.map_io		= qt2410_map_io,
-	.init_irq	= s3c2410_init_irq,
-	.init_machine	= qt2410_machine_init,
-	.init_time	= qt2410_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-real6410.c b/arch/arm/mach-s3c/mach-real6410.c
deleted file mode 100644
index 8c10ebc38a9c..000000000000
--- a/arch/arm/mach-s3c/mach-real6410.c
+++ /dev/null
@@ -1,333 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2010 Darius Augulis <augulis.darius@gmail.com>
-// Copyright 2008 Openmoko, Inc.
-// Copyright 2008 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//	http://armlinux.simtec.co.uk/
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/dm9000.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/types.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "map.h"
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-#include "irqs.h"
-
-#include <linux/soc/samsung/s3c-adc.h>
-#include "cpu.h"
-#include "devs.h"
-#include "fb.h"
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-
-#include "s3c64xx.h"
-#include "regs-modem-s3c64xx.h"
-#include "regs-srom-s3c64xx.h"
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg real6410_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	= 0,
-		.flags	= 0,
-		.ucon	= UCON,
-		.ulcon	= ULCON,
-		.ufcon	= UFCON,
-	},
-	[1] = {
-		.hwport	= 1,
-		.flags	= 0,
-		.ucon	= UCON,
-		.ulcon	= ULCON,
-		.ufcon	= UFCON,
-	},
-	[2] = {
-		.hwport	= 2,
-		.flags	= 0,
-		.ucon	= UCON,
-		.ulcon	= ULCON,
-		.ufcon	= UFCON,
-	},
-	[3] = {
-		.hwport	= 3,
-		.flags	= 0,
-		.ucon	= UCON,
-		.ulcon	= ULCON,
-		.ufcon	= UFCON,
-	},
-};
-
-/* DM9000AEP 10/100 ethernet controller */
-
-static struct resource real6410_dm9k_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1, 2),
-	[1] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1 + 4, 2),
-	[2] = DEFINE_RES_NAMED(S3C_EINT(7), 1, NULL, IORESOURCE_IRQ \
-					| IORESOURCE_IRQ_HIGHLEVEL),
-};
-
-static struct dm9000_plat_data real6410_dm9k_pdata = {
-	.flags		= (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
-};
-
-static struct platform_device real6410_device_eth = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(real6410_dm9k_resource),
-	.resource	= real6410_dm9k_resource,
-	.dev		= {
-		.platform_data	= &real6410_dm9k_pdata,
-	},
-};
-
-static struct s3c_fb_pd_win real6410_lcd_type0_fb_win = {
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-	.xres		= 480,
-	.yres		= 272,
-};
-
-static struct fb_videomode real6410_lcd_type0_timing = {
-	/* 4.3" 480x272 */
-	.left_margin	= 3,
-	.right_margin	= 2,
-	.upper_margin	= 1,
-	.lower_margin	= 1,
-	.hsync_len	= 40,
-	.vsync_len	= 1,
-};
-
-static struct s3c_fb_pd_win real6410_lcd_type1_fb_win = {
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-	.xres		= 800,
-	.yres		= 480,
-};
-
-static struct fb_videomode real6410_lcd_type1_timing = {
-	/* 7.0" 800x480 */
-	.left_margin	= 8,
-	.right_margin	= 13,
-	.upper_margin	= 7,
-	.lower_margin	= 5,
-	.hsync_len	= 3,
-	.vsync_len	= 1,
-	.xres		= 800,
-	.yres		= 480,
-};
-
-static struct s3c_fb_platdata real6410_lcd_pdata[] __initdata = {
-	{
-		.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
-		.vtiming	= &real6410_lcd_type0_timing,
-		.win[0]		= &real6410_lcd_type0_fb_win,
-		.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-		.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	}, {
-		.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
-		.vtiming	= &real6410_lcd_type1_timing,
-		.win[0]		= &real6410_lcd_type1_fb_win,
-		.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-		.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	},
-	{ },
-};
-
-static struct mtd_partition real6410_nand_part[] = {
-	[0] = {
-		.name	= "uboot",
-		.size	= SZ_1M,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "kernel",
-		.size	= SZ_2M,
-		.offset	= SZ_1M,
-	},
-	[2] = {
-		.name	= "rootfs",
-		.size	= MTDPART_SIZ_FULL,
-		.offset	= SZ_1M + SZ_2M,
-	},
-};
-
-static struct s3c2410_nand_set real6410_nand_sets[] = {
-	[0] = {
-		.name		= "nand",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(real6410_nand_part),
-		.partitions	= real6410_nand_part,
-	},
-};
-
-static struct s3c2410_platform_nand real6410_nand_info = {
-	.tacls		= 25,
-	.twrph0		= 55,
-	.twrph1		= 40,
-	.nr_sets	= ARRAY_SIZE(real6410_nand_sets),
-	.sets		= real6410_nand_sets,
-	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
-};
-
-static struct platform_device *real6410_devices[] __initdata = {
-	&real6410_device_eth,
-	&s3c_device_hsmmc0,
-	&s3c_device_hsmmc1,
-	&s3c_device_fb,
-	&s3c_device_nand,
-	&s3c_device_adc,
-	&s3c_device_ohci,
-};
-
-static void __init real6410_map_io(void)
-{
-	u32 tmp;
-
-	s3c64xx_init_io(NULL, 0);
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(real6410_uartcfgs, ARRAY_SIZE(real6410_uartcfgs));
-	s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
-
-	/* set the LCD type */
-	tmp = __raw_readl(S3C64XX_SPCON);
-	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
-	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
-	__raw_writel(tmp, S3C64XX_SPCON);
-
-	/* remove the LCD bypass */
-	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
-	tmp &= ~MIFPCON_LCD_BYPASS;
-	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
-}
-
-/*
- * real6410_features string
- *
- * 0-9 LCD configuration
- *
- */
-static char real6410_features_str[12] __initdata = "0";
-
-static int __init real6410_features_setup(char *str)
-{
-	if (str)
-		strlcpy(real6410_features_str, str,
-			sizeof(real6410_features_str));
-	return 1;
-}
-
-__setup("real6410=", real6410_features_setup);
-
-#define FEATURE_SCREEN (1 << 0)
-
-struct real6410_features_t {
-	int done;
-	int lcd_index;
-};
-
-static void real6410_parse_features(
-		struct real6410_features_t *features,
-		const char *features_str)
-{
-	const char *fp = features_str;
-
-	features->done = 0;
-	features->lcd_index = 0;
-
-	while (*fp) {
-		char f = *fp++;
-
-		switch (f) {
-		case '0'...'9':	/* tft screen */
-			if (features->done & FEATURE_SCREEN) {
-				printk(KERN_INFO "REAL6410: '%c' ignored, "
-					"screen type already set\n", f);
-			} else {
-				int li = f - '0';
-				if (li >= ARRAY_SIZE(real6410_lcd_pdata))
-					printk(KERN_INFO "REAL6410: '%c' out "
-						"of range LCD mode\n", f);
-				else {
-					features->lcd_index = li;
-				}
-			}
-			features->done |= FEATURE_SCREEN;
-			break;
-		}
-	}
-}
-
-static void __init real6410_machine_init(void)
-{
-	u32 cs1;
-	struct real6410_features_t features = { 0 };
-
-	printk(KERN_INFO "REAL6410: Option string real6410=%s\n",
-			real6410_features_str);
-
-	/* Parse the feature string */
-	real6410_parse_features(&features, real6410_features_str);
-
-	printk(KERN_INFO "REAL6410: selected LCD display is %dx%d\n",
-		real6410_lcd_pdata[features.lcd_index].win[0]->xres,
-		real6410_lcd_pdata[features.lcd_index].win[0]->yres);
-
-	s3c_fb_set_platdata(&real6410_lcd_pdata[features.lcd_index]);
-	s3c_nand_set_platdata(&real6410_nand_info);
-	s3c64xx_ts_set_platdata(NULL);
-
-	/* configure nCS1 width to 16 bits */
-
-	cs1 = __raw_readl(S3C64XX_SROM_BW) &
-		~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
-	cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
-		(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
-		(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
-			S3C64XX_SROM_BW__NCS1__SHIFT;
-	__raw_writel(cs1, S3C64XX_SROM_BW);
-
-	/* set timing for nCS1 suitable for ethernet chip */
-
-	__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
-		(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
-		(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
-		(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
-		(13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
-		(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
-		(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
-
-	gpio_request(S3C64XX_GPF(15), "LCD power");
-
-	platform_add_devices(real6410_devices, ARRAY_SIZE(real6410_devices));
-}
-
-MACHINE_START(REAL6410, "REAL6410")
-	/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= S3C64XX_NR_IRQS,
-	.init_irq	= s3c6410_init_irq,
-	.map_io		= real6410_map_io,
-	.init_machine	= real6410_machine_init,
-	.init_time	= s3c64xx_timer_init,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-rx1950.c b/arch/arm/mach-s3c/mach-rx1950.c
deleted file mode 100644
index d8c49e562660..000000000000
--- a/arch/arm/mach-s3c/mach-rx1950.c
+++ /dev/null
@@ -1,884 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2006-2009 Victor Chukhantsev, Denis Grigoriev,
-// Copyright (c) 2007-2010 Vasily Khoruzhick
-//
-// based on smdk2440 written by Ben Dooks
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/memblock.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/device.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/pwm.h>
-#include <linux/s3c_adc_battery.h>
-#include <linux/leds.h>
-#include <linux/i2c.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/mmc/host.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/mmc-s3cmci.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <linux/platform_data/fb-s3c2410.h>
-
-#include <sound/uda1380.h>
-
-#include "hardware-s3c24xx.h"
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-
-#include "cpu.h"
-#include "devs.h"
-#include "pm.h"
-#include "gpio-cfg.h"
-
-#include "s3c24xx.h"
-#include "h1940.h"
-
-#define LCD_PWM_PERIOD 192960
-#define LCD_PWM_DUTY 127353
-
-static struct map_desc rx1950_iodesc[] __initdata = {
-};
-
-static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = {
-	[0] = {
-	       .hwport = 0,
-	       .flags = 0,
-	       .ucon = 0x3c5,
-	       .ulcon = 0x03,
-	       .ufcon = 0x51,
-		.clk_sel = S3C2410_UCON_CLKSEL3,
-	},
-	[1] = {
-	       .hwport = 1,
-	       .flags = 0,
-	       .ucon = 0x3c5,
-	       .ulcon = 0x03,
-	       .ufcon = 0x51,
-		.clk_sel = S3C2410_UCON_CLKSEL3,
-	},
-	/* IR port */
-	[2] = {
-	       .hwport = 2,
-	       .flags = 0,
-	       .ucon = 0x3c5,
-	       .ulcon = 0x43,
-	       .ufcon = 0xf1,
-		.clk_sel = S3C2410_UCON_CLKSEL3,
-	},
-};
-
-static struct s3c2410fb_display rx1950_display = {
-	.type = S3C2410_LCDCON1_TFT,
-	.width = 240,
-	.height = 320,
-	.xres = 240,
-	.yres = 320,
-	.bpp = 16,
-
-	.pixclock = 260000,
-	.left_margin = 10,
-	.right_margin = 20,
-	.hsync_len = 10,
-	.upper_margin = 2,
-	.lower_margin = 2,
-	.vsync_len = 2,
-
-	.lcdcon5 = S3C2410_LCDCON5_FRM565 |
-			   S3C2410_LCDCON5_INVVCLK |
-			   S3C2410_LCDCON5_INVVLINE |
-			   S3C2410_LCDCON5_INVVFRAME |
-			   S3C2410_LCDCON5_HWSWP |
-			   (0x02 << 13) |
-			   (0x02 << 15),
-
-};
-
-static int power_supply_init(struct device *dev)
-{
-	return gpio_request(S3C2410_GPF(2), "cable plugged");
-}
-
-static int rx1950_is_ac_online(void)
-{
-	return !gpio_get_value(S3C2410_GPF(2));
-}
-
-static void power_supply_exit(struct device *dev)
-{
-	gpio_free(S3C2410_GPF(2));
-}
-
-static char *rx1950_supplicants[] = {
-	"main-battery"
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init			= power_supply_init,
-	.is_ac_online		= rx1950_is_ac_online,
-	.exit			= power_supply_exit,
-	.supplied_to		= rx1950_supplicants,
-	.num_supplicants	= ARRAY_SIZE(rx1950_supplicants),
-};
-
-static struct resource power_supply_resources[] = {
-	[0] = DEFINE_RES_NAMED(IRQ_EINT2, 1, "ac", IORESOURCE_IRQ \
-			| IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE),
-};
-
-static struct platform_device power_supply = {
-	.name			= "pda-power",
-	.id			= -1,
-	.dev			= {
-					.platform_data =
-						&power_supply_info,
-	},
-	.resource		= power_supply_resources,
-	.num_resources		= ARRAY_SIZE(power_supply_resources),
-};
-
-static const struct s3c_adc_bat_thresh bat_lut_noac[] = {
-	{ .volt = 4100, .cur = 156, .level = 100},
-	{ .volt = 4050, .cur = 156, .level = 95},
-	{ .volt = 4025, .cur = 141, .level = 90},
-	{ .volt = 3995, .cur = 144, .level = 85},
-	{ .volt = 3957, .cur = 162, .level = 80},
-	{ .volt = 3931, .cur = 147, .level = 75},
-	{ .volt = 3902, .cur = 147, .level = 70},
-	{ .volt = 3863, .cur = 153, .level = 65},
-	{ .volt = 3838, .cur = 150, .level = 60},
-	{ .volt = 3800, .cur = 153, .level = 55},
-	{ .volt = 3765, .cur = 153, .level = 50},
-	{ .volt = 3748, .cur = 172, .level = 45},
-	{ .volt = 3740, .cur = 153, .level = 40},
-	{ .volt = 3714, .cur = 175, .level = 35},
-	{ .volt = 3710, .cur = 156, .level = 30},
-	{ .volt = 3963, .cur = 156, .level = 25},
-	{ .volt = 3672, .cur = 178, .level = 20},
-	{ .volt = 3651, .cur = 178, .level = 15},
-	{ .volt = 3629, .cur = 178, .level = 10},
-	{ .volt = 3612, .cur = 162, .level = 5},
-	{ .volt = 3605, .cur = 162, .level = 0},
-};
-
-static const struct s3c_adc_bat_thresh bat_lut_acin[] = {
-	{ .volt = 4200, .cur = 0, .level = 100},
-	{ .volt = 4190, .cur = 0, .level = 99},
-	{ .volt = 4178, .cur = 0, .level = 95},
-	{ .volt = 4110, .cur = 0, .level = 70},
-	{ .volt = 4076, .cur = 0, .level = 65},
-	{ .volt = 4046, .cur = 0, .level = 60},
-	{ .volt = 4021, .cur = 0, .level = 55},
-	{ .volt = 3999, .cur = 0, .level = 50},
-	{ .volt = 3982, .cur = 0, .level = 45},
-	{ .volt = 3965, .cur = 0, .level = 40},
-	{ .volt = 3957, .cur = 0, .level = 35},
-	{ .volt = 3948, .cur = 0, .level = 30},
-	{ .volt = 3936, .cur = 0, .level = 25},
-	{ .volt = 3927, .cur = 0, .level = 20},
-	{ .volt = 3906, .cur = 0, .level = 15},
-	{ .volt = 3880, .cur = 0, .level = 10},
-	{ .volt = 3829, .cur = 0, .level = 5},
-	{ .volt = 3820, .cur = 0, .level = 0},
-};
-
-static struct gpiod_lookup_table rx1950_bat_gpio_table = {
-	.dev_id = "s3c-adc-battery",
-	.table = {
-		/* Charge status S3C2410_GPF(3) */
-		GPIO_LOOKUP("GPIOF", 3, "charge-status", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static int rx1950_bat_init(void)
-{
-	int ret;
-
-	ret = gpio_request(S3C2410_GPJ(2), "rx1950-charger-enable-1");
-	if (ret)
-		goto err_gpio1;
-	ret = gpio_request(S3C2410_GPJ(3), "rx1950-charger-enable-2");
-	if (ret)
-		goto err_gpio2;
-
-	return 0;
-
-err_gpio2:
-	gpio_free(S3C2410_GPJ(2));
-err_gpio1:
-	return ret;
-}
-
-static void rx1950_bat_exit(void)
-{
-	gpio_free(S3C2410_GPJ(2));
-	gpio_free(S3C2410_GPJ(3));
-}
-
-static void rx1950_enable_charger(void)
-{
-	gpio_direction_output(S3C2410_GPJ(2), 1);
-	gpio_direction_output(S3C2410_GPJ(3), 1);
-}
-
-static void rx1950_disable_charger(void)
-{
-	gpio_direction_output(S3C2410_GPJ(2), 0);
-	gpio_direction_output(S3C2410_GPJ(3), 0);
-}
-
-static DEFINE_SPINLOCK(rx1950_blink_spin);
-
-static int rx1950_led_blink_set(struct gpio_desc *desc, int state,
-	unsigned long *delay_on, unsigned long *delay_off)
-{
-	int gpio = desc_to_gpio(desc);
-	int blink_gpio, check_gpio;
-
-	switch (gpio) {
-	case S3C2410_GPA(6):
-		blink_gpio = S3C2410_GPA(4);
-		check_gpio = S3C2410_GPA(3);
-		break;
-	case S3C2410_GPA(7):
-		blink_gpio = S3C2410_GPA(3);
-		check_gpio = S3C2410_GPA(4);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (delay_on && delay_off && !*delay_on && !*delay_off)
-		*delay_on = *delay_off = 500;
-
-	spin_lock(&rx1950_blink_spin);
-
-	switch (state) {
-	case GPIO_LED_NO_BLINK_LOW:
-	case GPIO_LED_NO_BLINK_HIGH:
-		if (!gpio_get_value(check_gpio))
-			gpio_set_value(S3C2410_GPJ(6), 0);
-		gpio_set_value(blink_gpio, 0);
-		gpio_set_value(gpio, state);
-		break;
-	case GPIO_LED_BLINK:
-		gpio_set_value(gpio, 0);
-		gpio_set_value(S3C2410_GPJ(6), 1);
-		gpio_set_value(blink_gpio, 1);
-		break;
-	}
-
-	spin_unlock(&rx1950_blink_spin);
-
-	return 0;
-}
-
-static struct gpio_led rx1950_leds_desc[] = {
-	{
-		.name			= "Green",
-		.default_trigger	= "main-battery-full",
-		.gpio			= S3C2410_GPA(6),
-		.retain_state_suspended	= 1,
-	},
-	{
-		.name			= "Red",
-		.default_trigger
-			= "main-battery-charging-blink-full-solid",
-		.gpio			= S3C2410_GPA(7),
-		.retain_state_suspended	= 1,
-	},
-	{
-		.name			= "Blue",
-		.default_trigger	= "rx1950-acx-mem",
-		.gpio			= S3C2410_GPA(11),
-		.retain_state_suspended	= 1,
-	},
-};
-
-static struct gpio_led_platform_data rx1950_leds_pdata = {
-	.num_leds	= ARRAY_SIZE(rx1950_leds_desc),
-	.leds		= rx1950_leds_desc,
-	.gpio_blink_set	= rx1950_led_blink_set,
-};
-
-static struct platform_device rx1950_leds = {
-	.name	= "leds-gpio",
-	.id		= -1,
-	.dev	= {
-				.platform_data = &rx1950_leds_pdata,
-	},
-};
-
-static struct s3c_adc_bat_pdata rx1950_bat_cfg = {
-	.init = rx1950_bat_init,
-	.exit = rx1950_bat_exit,
-	.enable_charger = rx1950_enable_charger,
-	.disable_charger = rx1950_disable_charger,
-	.lut_noac = bat_lut_noac,
-	.lut_noac_cnt = ARRAY_SIZE(bat_lut_noac),
-	.lut_acin = bat_lut_acin,
-	.lut_acin_cnt = ARRAY_SIZE(bat_lut_acin),
-	.volt_channel = 0,
-	.current_channel = 1,
-	.volt_mult = 4235,
-	.current_mult = 2900,
-	.internal_impedance = 200,
-};
-
-static struct platform_device rx1950_battery = {
-	.name             = "s3c-adc-battery",
-	.id               = -1,
-	.dev = {
-		.parent = &s3c_device_adc.dev,
-		.platform_data = &rx1950_bat_cfg,
-	},
-};
-
-static struct s3c2410fb_mach_info rx1950_lcd_cfg = {
-	.displays = &rx1950_display,
-	.num_displays = 1,
-	.default_display = 0,
-
-	.lpcsel = 0x02,
-	.gpccon = 0xaa9556a9,
-	.gpccon_mask = 0xffc003fc,
-	.gpccon_reg = S3C2410_GPCCON,
-	.gpcup = 0x0000ffff,
-	.gpcup_mask = 0xffffffff,
-	.gpcup_reg = S3C2410_GPCUP,
-
-	.gpdcon = 0xaa90aaa1,
-	.gpdcon_mask = 0xffc0fff0,
-	.gpdcon_reg = S3C2410_GPDCON,
-	.gpdup = 0x0000fcfd,
-	.gpdup_mask = 0xffffffff,
-	.gpdup_reg = S3C2410_GPDUP,
-};
-
-static struct pwm_lookup rx1950_pwm_lookup[] = {
-	PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight.0", NULL, 48000,
-		   PWM_POLARITY_NORMAL),
-	PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", "RX1950 LCD", LCD_PWM_PERIOD,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct pwm_device *lcd_pwm;
-static struct pwm_state lcd_pwm_state;
-
-static void rx1950_lcd_power(int enable)
-{
-	int i;
-	static int enabled;
-	if (enabled == enable)
-		return;
-	if (!enable) {
-
-		/* GPC11-GPC15->OUTPUT */
-		for (i = 11; i < 16; i++)
-			gpio_direction_output(S3C2410_GPC(i), 1);
-
-		/* Wait a bit here... */
-		mdelay(100);
-
-		/* GPD2-GPD7->OUTPUT */
-		/* GPD11-GPD15->OUTPUT */
-		/* GPD2-GPD7->1, GPD11-GPD15->1 */
-		for (i = 2; i < 8; i++)
-			gpio_direction_output(S3C2410_GPD(i), 1);
-		for (i = 11; i < 16; i++)
-			gpio_direction_output(S3C2410_GPD(i), 1);
-
-		/* Wait a bit here...*/
-		mdelay(100);
-
-		/* GPB0->OUTPUT, GPB0->0 */
-		gpio_direction_output(S3C2410_GPB(0), 0);
-
-		/* GPC1-GPC4->OUTPUT, GPC1-4->0 */
-		for (i = 1; i < 5; i++)
-			gpio_direction_output(S3C2410_GPC(i), 0);
-
-		/* GPC15-GPC11->0 */
-		for (i = 11; i < 16; i++)
-			gpio_direction_output(S3C2410_GPC(i), 0);
-
-		/* GPD15-GPD11->0, GPD2->GPD7->0 */
-		for (i = 11; i < 16; i++)
-			gpio_direction_output(S3C2410_GPD(i), 0);
-
-		for (i = 2; i < 8; i++)
-			gpio_direction_output(S3C2410_GPD(i), 0);
-
-		/* GPC6->0, GPC7->0, GPC5->0 */
-		gpio_direction_output(S3C2410_GPC(6), 0);
-		gpio_direction_output(S3C2410_GPC(7), 0);
-		gpio_direction_output(S3C2410_GPC(5), 0);
-
-		/* GPB1->OUTPUT, GPB1->0 */
-		gpio_direction_output(S3C2410_GPB(1), 0);
-
-		lcd_pwm_state.enabled = false;
-		pwm_apply_state(lcd_pwm, &lcd_pwm_state);
-
-		/* GPC0->0, GPC10->0 */
-		gpio_direction_output(S3C2410_GPC(0), 0);
-		gpio_direction_output(S3C2410_GPC(10), 0);
-	} else {
-		lcd_pwm_state.enabled = true;
-		pwm_apply_state(lcd_pwm, &lcd_pwm_state);
-
-		gpio_direction_output(S3C2410_GPC(0), 1);
-		gpio_direction_output(S3C2410_GPC(5), 1);
-
-		s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPB1_TOUT1);
-		gpio_direction_output(S3C2410_GPC(7), 1);
-
-		for (i = 1; i < 5; i++)
-			s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));
-
-		for (i = 11; i < 16; i++)
-			s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));
-
-		for (i = 2; i < 8; i++)
-			s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));
-
-		for (i = 11; i < 16; i++)
-			s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));
-
-		gpio_direction_output(S3C2410_GPC(10), 1);
-		gpio_direction_output(S3C2410_GPC(6), 1);
-	}
-	enabled = enable;
-}
-
-static void rx1950_bl_power(int enable)
-{
-	static int enabled;
-	if (enabled == enable)
-		return;
-	if (!enable) {
-			gpio_direction_output(S3C2410_GPB(0), 0);
-	} else {
-			/* LED driver need a "push" to power on */
-			gpio_direction_output(S3C2410_GPB(0), 1);
-			/* Warm up backlight for one period of PWM.
-			 * Without this trick its almost impossible to
-			 * enable backlight with low brightness value
-			 */
-			ndelay(48000);
-			s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
-	}
-	enabled = enable;
-}
-
-static int rx1950_backlight_init(struct device *dev)
-{
-	WARN_ON(gpio_request(S3C2410_GPB(0), "Backlight"));
-	lcd_pwm = pwm_get(dev, "RX1950 LCD");
-	if (IS_ERR(lcd_pwm)) {
-		dev_err(dev, "Unable to request PWM for LCD power!\n");
-		return PTR_ERR(lcd_pwm);
-	}
-
-	/*
-	 * Call pwm_init_state to initialize .polarity and .period. The other
-	 * values are fixed in this driver.
-	 */
-	pwm_init_state(lcd_pwm, &lcd_pwm_state);
-
-	lcd_pwm_state.duty_cycle = LCD_PWM_DUTY;
-
-	rx1950_lcd_power(1);
-	rx1950_bl_power(1);
-
-	return 0;
-}
-
-static void rx1950_backlight_exit(struct device *dev)
-{
-	rx1950_bl_power(0);
-	rx1950_lcd_power(0);
-
-	pwm_put(lcd_pwm);
-	gpio_free(S3C2410_GPB(0));
-}
-
-
-static int rx1950_backlight_notify(struct device *dev, int brightness)
-{
-	if (!brightness) {
-		rx1950_bl_power(0);
-		rx1950_lcd_power(0);
-	} else {
-		rx1950_lcd_power(1);
-		rx1950_bl_power(1);
-	}
-	return brightness;
-}
-
-static struct platform_pwm_backlight_data rx1950_backlight_data = {
-	.max_brightness = 24,
-	.dft_brightness = 4,
-	.init = rx1950_backlight_init,
-	.notify = rx1950_backlight_notify,
-	.exit = rx1950_backlight_exit,
-};
-
-static struct platform_device rx1950_backlight = {
-	.name = "pwm-backlight",
-	.dev = {
-		.parent = &samsung_device_pwm.dev,
-		.platform_data = &rx1950_backlight_data,
-	},
-};
-
-static void rx1950_set_mmc_power(unsigned char power_mode, unsigned short vdd)
-{
-	s3c24xx_mci_def_set_power(power_mode, vdd);
-
-	switch (power_mode) {
-	case MMC_POWER_OFF:
-		gpio_direction_output(S3C2410_GPJ(1), 0);
-		break;
-	case MMC_POWER_UP:
-	case MMC_POWER_ON:
-		gpio_direction_output(S3C2410_GPJ(1), 1);
-		break;
-	default:
-		break;
-	}
-}
-
-static struct s3c24xx_mci_pdata rx1950_mmc_cfg __initdata = {
-	.set_power = rx1950_set_mmc_power,
-	.ocr_avail = MMC_VDD_32_33,
-};
-
-static struct gpiod_lookup_table rx1950_mmc_gpio_table = {
-	.dev_id = "s3c2410-sdi",
-	.table = {
-		/* Card detect S3C2410_GPF(5) */
-		GPIO_LOOKUP("GPIOF", 5, "cd", GPIO_ACTIVE_LOW),
-		/* Write protect S3C2410_GPH(8) */
-		GPIO_LOOKUP("GPIOH", 8, "wp", GPIO_ACTIVE_LOW),
-		/* bus pins */
-		GPIO_LOOKUP_IDX("GPIOE",  5, "bus", 0, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  6, "bus", 1, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  7, "bus", 2, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  8, "bus", 3, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  9, "bus", 4, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct mtd_partition rx1950_nand_part[] = {
-	[0] = {
-			.name = "Boot0",
-			.offset = 0,
-			.size = 0x4000,
-			.mask_flags = MTD_WRITEABLE,
-	},
-	[1] = {
-			.name = "Boot1",
-			.offset = MTDPART_OFS_APPEND,
-			.size = 0x40000,
-			.mask_flags = MTD_WRITEABLE,
-	},
-	[2] = {
-			.name = "Kernel",
-			.offset = MTDPART_OFS_APPEND,
-			.size = 0x300000,
-			.mask_flags = 0,
-	},
-	[3] = {
-			.name = "Filesystem",
-			.offset = MTDPART_OFS_APPEND,
-			.size = MTDPART_SIZ_FULL,
-			.mask_flags = 0,
-	},
-};
-
-static struct s3c2410_nand_set rx1950_nand_sets[] = {
-	[0] = {
-			.name = "Internal",
-			.nr_chips = 1,
-			.nr_partitions = ARRAY_SIZE(rx1950_nand_part),
-			.partitions = rx1950_nand_part,
-	},
-};
-
-static struct s3c2410_platform_nand rx1950_nand_info = {
-	.tacls = 25,
-	.twrph0 = 50,
-	.twrph1 = 15,
-	.nr_sets = ARRAY_SIZE(rx1950_nand_sets),
-	.sets = rx1950_nand_sets,
-	.engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
-};
-
-static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {
-};
-
-static struct gpiod_lookup_table rx1950_udc_gpio_table = {
-	.dev_id = "s3c2410-usbgadget",
-	.table = {
-		GPIO_LOOKUP("GPIOG", 5, "vbus", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("GPIOJ", 5, "pullup", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct s3c2410_ts_mach_info rx1950_ts_cfg __initdata = {
-	.delay = 10000,
-	.presc = 49,
-	.oversampling_shift = 3,
-};
-
-static struct gpio_keys_button rx1950_gpio_keys_table[] = {
-	{
-		.code		= KEY_POWER,
-		.gpio		= S3C2410_GPF(0),
-		.active_low	= 1,
-		.desc		= "Power button",
-		.wakeup		= 1,
-	},
-	{
-		.code		= KEY_F5,
-		.gpio		= S3C2410_GPF(7),
-		.active_low	= 1,
-		.desc		= "Record button",
-	},
-	{
-		.code		= KEY_F1,
-		.gpio		= S3C2410_GPG(0),
-		.active_low	= 1,
-		.desc		= "Calendar button",
-	},
-	{
-		.code		= KEY_F2,
-		.gpio		= S3C2410_GPG(2),
-		.active_low	= 1,
-		.desc		= "Contacts button",
-	},
-	{
-		.code		= KEY_F3,
-		.gpio		= S3C2410_GPG(3),
-		.active_low	= 1,
-		.desc		= "Mail button",
-	},
-	{
-		.code		= KEY_F4,
-		.gpio		= S3C2410_GPG(7),
-		.active_low	= 1,
-		.desc		= "WLAN button",
-	},
-	{
-		.code		= KEY_LEFT,
-		.gpio		= S3C2410_GPG(10),
-		.active_low	= 1,
-		.desc		= "Left button",
-	},
-	{
-		.code		= KEY_RIGHT,
-		.gpio		= S3C2410_GPG(11),
-		.active_low	= 1,
-		.desc		= "Right button",
-	},
-	{
-		.code		= KEY_UP,
-		.gpio		= S3C2410_GPG(4),
-		.active_low	= 1,
-		.desc		= "Up button",
-	},
-	{
-		.code		= KEY_DOWN,
-		.gpio		= S3C2410_GPG(6),
-		.active_low	= 1,
-		.desc		= "Down button",
-	},
-	{
-		.code		= KEY_ENTER,
-		.gpio		= S3C2410_GPG(9),
-		.active_low	= 1,
-		.desc		= "Ok button"
-	},
-};
-
-static struct gpio_keys_platform_data rx1950_gpio_keys_data = {
-	.buttons = rx1950_gpio_keys_table,
-	.nbuttons = ARRAY_SIZE(rx1950_gpio_keys_table),
-};
-
-static struct platform_device rx1950_device_gpiokeys = {
-	.name = "gpio-keys",
-	.dev.platform_data = &rx1950_gpio_keys_data,
-};
-
-static struct uda1380_platform_data uda1380_info = {
-	.gpio_power	= S3C2410_GPJ(0),
-	.gpio_reset	= S3C2410_GPD(0),
-	.dac_clk	= UDA1380_DAC_CLK_SYSCLK,
-};
-
-static struct i2c_board_info rx1950_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("uda1380", 0x1a),
-		.platform_data = &uda1380_info,
-	},
-};
-
-static struct gpiod_lookup_table rx1950_audio_gpio_table = {
-	.dev_id = "rx1950-audio",
-	.table = {
-		GPIO_LOOKUP("GPIOG", 12, "hp-gpio", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("GPIOA", 1, "speaker-power", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device rx1950_audio = {
-	.name = "rx1950-audio",
-	.id = -1,
-};
-
-static struct platform_device *rx1950_devices[] __initdata = {
-	&s3c2410_device_dclk,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-	&s3c_device_usbgadget,
-	&s3c_device_rtc,
-	&s3c_device_nand,
-	&s3c_device_sdi,
-	&s3c_device_adc,
-	&s3c_device_ts,
-	&samsung_device_pwm,
-	&rx1950_backlight,
-	&rx1950_device_gpiokeys,
-	&power_supply,
-	&rx1950_battery,
-	&rx1950_leds,
-	&rx1950_audio,
-};
-
-static void __init rx1950_map_io(void)
-{
-	s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
-	s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-
-	/* setup PM */
-
-#ifdef CONFIG_PM_H1940
-	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 8);
-#endif
-
-	s3c_pm_init();
-}
-
-static void __init rx1950_init_time(void)
-{
-	s3c2442_init_clocks(16934000);
-	s3c24xx_timer_init();
-}
-
-static void __init rx1950_init_machine(void)
-{
-	int i;
-
-	s3c24xx_fb_set_platdata(&rx1950_lcd_cfg);
-	s3c24xx_udc_set_platdata(&rx1950_udc_cfg);
-	s3c24xx_ts_set_platdata(&rx1950_ts_cfg);
-	gpiod_add_lookup_table(&rx1950_mmc_gpio_table);
-	s3c24xx_mci_set_platdata(&rx1950_mmc_cfg);
-	s3c_i2c0_set_platdata(NULL);
-	s3c_nand_set_platdata(&rx1950_nand_info);
-
-	/* Turn off suspend on both USB ports, and switch the
-	 * selectable USB port to USB device mode. */
-	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
-						S3C2410_MISCCR_USBSUSPND0 |
-						S3C2410_MISCCR_USBSUSPND1, 0x0);
-
-	/* mmc power is disabled by default */
-	WARN_ON(gpio_request(S3C2410_GPJ(1), "MMC power"));
-	gpio_direction_output(S3C2410_GPJ(1), 0);
-
-	for (i = 0; i < 8; i++)
-		WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));
-
-	for (i = 10; i < 16; i++)
-		WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));
-
-	for (i = 2; i < 8; i++)
-		WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));
-
-	for (i = 11; i < 16; i++)
-		WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));
-
-	WARN_ON(gpio_request(S3C2410_GPB(1), "LCD power"));
-
-	WARN_ON(gpio_request(S3C2410_GPA(3), "Red blink"));
-	WARN_ON(gpio_request(S3C2410_GPA(4), "Green blink"));
-	WARN_ON(gpio_request(S3C2410_GPJ(6), "LED blink"));
-	gpio_direction_output(S3C2410_GPA(3), 0);
-	gpio_direction_output(S3C2410_GPA(4), 0);
-	gpio_direction_output(S3C2410_GPJ(6), 0);
-
-	pwm_add_table(rx1950_pwm_lookup, ARRAY_SIZE(rx1950_pwm_lookup));
-	gpiod_add_lookup_table(&rx1950_udc_gpio_table);
-	gpiod_add_lookup_table(&rx1950_audio_gpio_table);
-	gpiod_add_lookup_table(&rx1950_bat_gpio_table);
-	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
-	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
-			      S3C_GPIO_PULL_NONE);
-	platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));
-
-	i2c_register_board_info(0, rx1950_i2c_devices,
-		ARRAY_SIZE(rx1950_i2c_devices));
-}
-
-/* H1940 and RX3715 need to reserve this for suspend */
-static void __init rx1950_reserve(void)
-{
-	memblock_reserve(0x30003000, 0x1000);
-	memblock_reserve(0x30081000, 0x1000);
-}
-
-MACHINE_START(RX1950, "HP iPAQ RX1950")
-    /* Maintainers: Vasily Khoruzhick */
-	.atag_offset = 0x100,
-	.nr_irqs	= NR_IRQS_S3C2442,
-	.map_io = rx1950_map_io,
-	.reserve	= rx1950_reserve,
-	.init_irq	= s3c2442_init_irq,
-	.init_machine = rx1950_init_machine,
-	.init_time	= rx1950_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-rx3715.c b/arch/arm/mach-s3c/mach-rx3715.c
deleted file mode 100644
index 52b3c38acbb2..000000000000
--- a/arch/arm/mach-s3c/mach-rx3715.c
+++ /dev/null
@@ -1,213 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2003-2004 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// https://www.handhelds.org/projects/rx3715.html
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/memblock.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-#include <linux/console.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/serial.h>
-#include <linux/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand-ecc-sw-hamming.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/fb-s3c2410.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-#include "gpio-cfg.h"
-
-#include "cpu.h"
-#include "devs.h"
-#include "pm.h"
-
-#include "s3c24xx.h"
-#include "h1940.h"
-
-static struct map_desc rx3715_iodesc[] __initdata = {
-	/* dump ISA space somewhere unused */
-	{
-		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
-		.pfn		= __phys_to_pfn(S3C2410_CS3),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct s3c2410_uartcfg rx3715_uartcfgs[] = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-		.clk_sel	= S3C2410_UCON_CLKSEL3,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x00,
-		.clk_sel	= S3C2410_UCON_CLKSEL3,
-	},
-	/* IR port */
-	[2] = {
-		.hwport	     = 2,
-		.uart_flags  = UPF_CONS_FLOW,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x43,
-		.ufcon	     = 0x51,
-		.clk_sel	= S3C2410_UCON_CLKSEL3,
-	}
-};
-
-/* framebuffer lcd controller information */
-
-static struct s3c2410fb_display rx3715_lcdcfg __initdata = {
-	.lcdcon5 =	S3C2410_LCDCON5_INVVLINE |
-			S3C2410_LCDCON5_FRM565 |
-			S3C2410_LCDCON5_HWSWP,
-
-	.type		= S3C2410_LCDCON1_TFT,
-	.width		= 240,
-	.height		= 320,
-
-	.pixclock	= 260000,
-	.xres		= 240,
-	.yres		= 320,
-	.bpp		= 16,
-	.left_margin	= 36,
-	.right_margin	= 36,
-	.hsync_len	= 8,
-	.upper_margin	= 6,
-	.lower_margin	= 7,
-	.vsync_len	= 3,
-};
-
-static struct s3c2410fb_mach_info rx3715_fb_info __initdata = {
-
-	.displays =	&rx3715_lcdcfg,
-	.num_displays =	1,
-	.default_display = 0,
-
-	.lpcsel =	0xf82,
-
-	.gpccon =	0xaa955699,
-	.gpccon_mask =	0xffc003cc,
-	.gpccon_reg =	S3C2410_GPCCON,
-	.gpcup =	0x0000ffff,
-	.gpcup_mask =	0xffffffff,
-	.gpcup_reg =	S3C2410_GPCUP,
-
-	.gpdcon =	0xaa95aaa1,
-	.gpdcon_mask =	0xffc0fff0,
-	.gpdcon_reg =	S3C2410_GPDCON,
-	.gpdup =	0x0000faff,
-	.gpdup_mask =	0xffffffff,
-	.gpdup_reg =	S3C2410_GPDUP,
-};
-
-static struct mtd_partition __initdata rx3715_nand_part[] = {
-	[0] = {
-		.name		= "Whole Flash",
-		.offset		= 0,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= MTD_WRITEABLE,
-	}
-};
-
-static struct s3c2410_nand_set __initdata rx3715_nand_sets[] = {
-	[0] = {
-		.name		= "Internal",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(rx3715_nand_part),
-		.partitions	= rx3715_nand_part,
-	},
-};
-
-static struct s3c2410_platform_nand __initdata rx3715_nand_info = {
-	.tacls		= 25,
-	.twrph0		= 50,
-	.twrph1		= 15,
-	.nr_sets	= ARRAY_SIZE(rx3715_nand_sets),
-	.sets		= rx3715_nand_sets,
-	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
-};
-
-static struct platform_device *rx3715_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-	&s3c_device_nand,
-};
-
-static void __init rx3715_map_io(void)
-{
-	s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
-	s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init rx3715_init_time(void)
-{
-	s3c2440_init_clocks(16934000);
-	s3c24xx_timer_init();
-}
-
-/* H1940 and RX3715 need to reserve this for suspend */
-static void __init rx3715_reserve(void)
-{
-	memblock_reserve(0x30003000, 0x1000);
-	memblock_reserve(0x30081000, 0x1000);
-}
-
-static void __init rx3715_init_machine(void)
-{
-#ifdef CONFIG_PM_H1940
-	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
-#endif
-	s3c_pm_init();
-
-	s3c_nand_set_platdata(&rx3715_nand_info);
-	s3c24xx_fb_set_platdata(&rx3715_fb_info);
-	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
-	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
-			      S3C_GPIO_PULL_NONE);
-	platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices));
-}
-
-MACHINE_START(RX3715, "IPAQ-RX3715")
-	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2440,
-	.map_io		= rx3715_map_io,
-	.reserve	= rx3715_reserve,
-	.init_irq	= s3c2440_init_irq,
-	.init_machine	= rx3715_init_machine,
-	.init_time	= rx3715_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-s3c2416-dt.c b/arch/arm/mach-s3c/mach-s3c2416-dt.c
deleted file mode 100644
index 418544d3015d..000000000000
--- a/arch/arm/mach-s3c/mach-s3c2416-dt.c
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Samsung's S3C2416 flattened device tree enabled machine
-//
-// Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de>
-//
-// based on mach-exynos/mach-exynos4-dt.c
-//
-// Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
-//		http://www.samsung.com
-// Copyright (c) 2010-2011 Linaro Ltd.
-//		www.linaro.org
-
-#include <linux/clocksource.h>
-#include <linux/irqchip.h>
-#include <linux/serial_s3c.h>
-
-#include <asm/mach/arch.h>
-#include "map.h"
-
-#include "cpu.h"
-#include "pm.h"
-
-#include "s3c24xx.h"
-
-static void __init s3c2416_dt_map_io(void)
-{
-	s3c24xx_init_io(NULL, 0);
-}
-
-static void __init s3c2416_dt_machine_init(void)
-{
-	s3c_pm_init();
-}
-
-static const char *const s3c2416_dt_compat[] __initconst = {
-	"samsung,s3c2416",
-	"samsung,s3c2450",
-	NULL
-};
-
-DT_MACHINE_START(S3C2416_DT, "Samsung S3C2416 (Flattened Device Tree)")
-	/* Maintainer: Heiko Stuebner <heiko@sntech.de> */
-	.dt_compat	= s3c2416_dt_compat,
-	.map_io		= s3c2416_dt_map_io,
-	.init_irq	= irqchip_init,
-	.init_machine	= s3c2416_dt_machine_init,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-smartq.c b/arch/arm/mach-s3c/mach-smartq.c
deleted file mode 100644
index 5b6e7c2a85ef..000000000000
--- a/arch/arm/mach-s3c/mach-smartq.c
+++ /dev/null
@@ -1,424 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2010 Maurus Cuelenaere
-
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/platform_data/s3c-hsotg.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-
-#include "map.h"
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-
-#include "cpu.h"
-#include "devs.h"
-#include <linux/platform_data/i2c-s3c2410.h>
-#include "gpio-cfg.h"
-#include <linux/platform_data/hwmon-s3c.h>
-#include <linux/platform_data/usb-ohci-s3c2410.h>
-#include "sdhci.h"
-#include <linux/platform_data/touchscreen-s3c2410.h>
-
-#include <video/platform_lcd.h>
-
-#include "s3c64xx.h"
-#include "mach-smartq.h"
-#include "regs-modem-s3c64xx.h"
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg smartq_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-};
-
-static void smartq_usb_host_powercontrol(int port, int to)
-{
-	pr_debug("%s(%d, %d)\n", __func__, port, to);
-
-	if (port == 0) {
-		gpio_set_value(S3C64XX_GPL(0), to);
-		gpio_set_value(S3C64XX_GPL(1), to);
-	}
-}
-
-static irqreturn_t smartq_usb_host_ocirq(int irq, void *pw)
-{
-	struct s3c2410_hcd_info *info = pw;
-
-	if (gpio_get_value(S3C64XX_GPL(10)) == 0) {
-		pr_debug("%s: over-current irq (oc detected)\n", __func__);
-		s3c2410_usb_report_oc(info, 3);
-	} else {
-		pr_debug("%s: over-current irq (oc cleared)\n", __func__);
-		s3c2410_usb_report_oc(info, 0);
-	}
-
-	return IRQ_HANDLED;
-}
-
-static void smartq_usb_host_enableoc(struct s3c2410_hcd_info *info, int on)
-{
-	int ret;
-
-	/* This isn't present on a SmartQ 5 board */
-	if (machine_is_smartq5())
-		return;
-
-	if (on) {
-		ret = request_irq(gpio_to_irq(S3C64XX_GPL(10)),
-				  smartq_usb_host_ocirq,
-				  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-				  "USB host overcurrent", info);
-		if (ret != 0)
-			pr_err("failed to request usb oc irq: %d\n", ret);
-	} else {
-		free_irq(gpio_to_irq(S3C64XX_GPL(10)), info);
-	}
-}
-
-static struct s3c2410_hcd_info smartq_usb_host_info = {
-	.port[0]	= {
-		.flags	= S3C_HCDFLG_USED
-	},
-	.port[1]	= {
-		.flags	= 0
-	},
-
-	.power_control	= smartq_usb_host_powercontrol,
-	.enable_oc	= smartq_usb_host_enableoc,
-};
-
-static struct gpiod_lookup_table smartq_usb_otg_vbus_gpiod_table = {
-	.dev_id = "gpio-vbus",
-	.table = {
-		GPIO_LOOKUP("GPL", 9, "vbus", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-static struct platform_device smartq_usb_otg_vbus_dev = {
-	.name			= "gpio-vbus",
-};
-
-static struct pwm_lookup smartq_pwm_lookup[] = {
-	PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL,
-		   1000000000 / (1000 * 20), PWM_POLARITY_NORMAL),
-};
-
-static int smartq_bl_init(struct device *dev)
-{
-    s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2));
-
-    return 0;
-}
-
-static struct platform_pwm_backlight_data smartq_backlight_data = {
-	.max_brightness	= 1000,
-	.dft_brightness	= 600,
-	.init		= smartq_bl_init,
-};
-
-static struct platform_device smartq_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent	= &samsung_device_pwm.dev,
-		.platform_data = &smartq_backlight_data,
-	},
-};
-
-static struct s3c2410_ts_mach_info smartq_touchscreen_pdata __initdata = {
-	.delay			= 65535,
-	.presc			= 99,
-	.oversampling_shift	= 4,
-};
-
-static struct s3c_sdhci_platdata smartq_internal_hsmmc_pdata = {
-	.max_width		= 4,
-	.cd_type		= S3C_SDHCI_CD_PERMANENT,
-};
-
-static struct s3c_hwmon_pdata smartq_hwmon_pdata __initdata = {
-	/* Battery voltage (?-4.2V) */
-	.in[0] = &(struct s3c_hwmon_chcfg) {
-		.name		= "smartq:battery-voltage",
-		.mult		= 3300,
-		.div		= 2048,
-	},
-	/* Reference voltage (1.2V) */
-	.in[1] = &(struct s3c_hwmon_chcfg) {
-		.name		= "smartq:reference-voltage",
-		.mult		= 3300,
-		.div		= 4096,
-	},
-};
-
-static struct dwc2_hsotg_plat smartq_hsotg_pdata;
-
-static int __init smartq_lcd_setup_gpio(void)
-{
-	int ret;
-
-	ret = gpio_request(S3C64XX_GPM(3), "LCD power");
-	if (ret < 0)
-		return ret;
-
-	/* turn power off */
-	gpio_direction_output(S3C64XX_GPM(3), 0);
-
-	return 0;
-}
-
-/* GPM0 -> CS */
-static struct spi_gpio_platform_data smartq_lcd_control = {
-	.num_chipselect	= 1,
-};
-
-static struct platform_device smartq_lcd_control_device = {
-	.name			= "spi_gpio",
-	.id			= 1,
-	.dev.platform_data	= &smartq_lcd_control,
-};
-
-static struct gpiod_lookup_table smartq_lcd_control_gpiod_table = {
-	.dev_id         = "spi_gpio",
-	.table          = {
-		GPIO_LOOKUP("GPIOM", 1,
-			    "sck", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("GPIOM", 2,
-			    "mosi", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("GPIOM", 3,
-			    "miso", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("GPIOM", 0,
-			    "cs", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static void smartq_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
-{
-	gpio_direction_output(S3C64XX_GPM(3), power);
-}
-
-static struct plat_lcd_data smartq_lcd_power_data = {
-	.set_power	= smartq_lcd_power_set,
-};
-
-static struct platform_device smartq_lcd_power_device = {
-	.name			= "platform-lcd",
-	.dev.parent		= &s3c_device_fb.dev,
-	.dev.platform_data	= &smartq_lcd_power_data,
-};
-
-static struct i2c_board_info smartq_i2c_devs[] __initdata = {
-	{ I2C_BOARD_INFO("wm8987", 0x1a), },
-};
-
-static struct platform_device *smartq_devices[] __initdata = {
-	&s3c_device_hsmmc1,	/* Init iNAND first, ... */
-	&s3c_device_hsmmc0,	/* ... then the external SD card */
-	&s3c_device_hsmmc2,
-	&s3c_device_adc,
-	&s3c_device_fb,
-	&s3c_device_hwmon,
-	&s3c_device_i2c0,
-	&s3c_device_ohci,
-	&s3c_device_rtc,
-	&samsung_device_pwm,
-	&s3c_device_usb_hsotg,
-	&s3c64xx_device_iis0,
-	&smartq_backlight_device,
-	&smartq_lcd_control_device,
-	&smartq_lcd_power_device,
-	&smartq_usb_otg_vbus_dev,
-};
-
-static void __init smartq_lcd_mode_set(void)
-{
-	u32 tmp;
-
-	/* set the LCD type */
-	tmp = __raw_readl(S3C64XX_SPCON);
-	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
-	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
-	__raw_writel(tmp, S3C64XX_SPCON);
-
-	/* remove the LCD bypass */
-	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
-	tmp &= ~MIFPCON_LCD_BYPASS;
-	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
-}
-
-static void smartq_power_off(void)
-{
-	gpio_direction_output(S3C64XX_GPK(15), 1);
-}
-
-static int __init smartq_power_off_init(void)
-{
-	int ret;
-
-	ret = gpio_request(S3C64XX_GPK(15), "Power control");
-	if (ret < 0) {
-		pr_err("%s: failed to get GPK15\n", __func__);
-		return ret;
-	}
-
-	/* leave power on */
-	gpio_direction_output(S3C64XX_GPK(15), 0);
-
-	pm_power_off = smartq_power_off;
-
-	return ret;
-}
-
-static int __init smartq_usb_host_init(void)
-{
-	int ret;
-
-	ret = gpio_request(S3C64XX_GPL(0), "USB power control");
-	if (ret < 0) {
-		pr_err("%s: failed to get GPL0\n", __func__);
-		return ret;
-	}
-
-	ret = gpio_request(S3C64XX_GPL(1), "USB host power control");
-	if (ret < 0) {
-		pr_err("%s: failed to get GPL1\n", __func__);
-		goto err;
-	}
-
-	if (!machine_is_smartq5()) {
-		/* This isn't present on a SmartQ 5 board */
-		ret = gpio_request(S3C64XX_GPL(10), "USB host overcurrent");
-		if (ret < 0) {
-			pr_err("%s: failed to get GPL10\n", __func__);
-			goto err2;
-		}
-	}
-
-	/* turn power off */
-	gpio_direction_output(S3C64XX_GPL(0), 0);
-	gpio_direction_output(S3C64XX_GPL(1), 0);
-	if (!machine_is_smartq5())
-		gpio_direction_input(S3C64XX_GPL(10));
-
-	s3c_device_ohci.dev.platform_data = &smartq_usb_host_info;
-
-	return 0;
-
-err2:
-	gpio_free(S3C64XX_GPL(1));
-err:
-	gpio_free(S3C64XX_GPL(0));
-	return ret;
-}
-
-static int __init smartq_wifi_init(void)
-{
-	int ret;
-
-	ret = gpio_request(S3C64XX_GPK(1), "wifi control");
-	if (ret < 0) {
-		pr_err("%s: failed to get GPK1\n", __func__);
-		return ret;
-	}
-
-	ret = gpio_request(S3C64XX_GPK(2), "wifi reset");
-	if (ret < 0) {
-		pr_err("%s: failed to get GPK2\n", __func__);
-		gpio_free(S3C64XX_GPK(1));
-		return ret;
-	}
-
-	/* turn power on */
-	gpio_direction_output(S3C64XX_GPK(1), 1);
-
-	/* reset device */
-	gpio_direction_output(S3C64XX_GPK(2), 0);
-	mdelay(100);
-	gpio_set_value(S3C64XX_GPK(2), 1);
-	gpio_direction_input(S3C64XX_GPK(2));
-
-	return 0;
-}
-
-static struct map_desc smartq_iodesc[] __initdata = {};
-void __init smartq_map_io(void)
-{
-	s3c64xx_init_io(smartq_iodesc, ARRAY_SIZE(smartq_iodesc));
-	s3c64xx_set_xtal_freq(12000000);
-	s3c64xx_set_xusbxti_freq(12000000);
-	s3c24xx_init_uarts(smartq_uartcfgs, ARRAY_SIZE(smartq_uartcfgs));
-	s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
-
-	smartq_lcd_mode_set();
-}
-
-static struct gpiod_lookup_table smartq_audio_gpios = {
-	.dev_id = "smartq-audio",
-	.table = {
-		GPIO_LOOKUP("GPL", 12, "headphone detect", 0),
-		GPIO_LOOKUP("GPK", 12, "amplifiers shutdown", 0),
-		{ },
-	},
-};
-
-void __init smartq_machine_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	dwc2_hsotg_set_platdata(&smartq_hsotg_pdata);
-	s3c_hwmon_set_platdata(&smartq_hwmon_pdata);
-	s3c_sdhci1_set_platdata(&smartq_internal_hsmmc_pdata);
-	s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata);
-	s3c64xx_ts_set_platdata(&smartq_touchscreen_pdata);
-
-	i2c_register_board_info(0, smartq_i2c_devs,
-				ARRAY_SIZE(smartq_i2c_devs));
-
-	WARN_ON(smartq_lcd_setup_gpio());
-	WARN_ON(smartq_power_off_init());
-	WARN_ON(smartq_usb_host_init());
-	WARN_ON(smartq_wifi_init());
-
-	pwm_add_table(smartq_pwm_lookup, ARRAY_SIZE(smartq_pwm_lookup));
-	gpiod_add_lookup_table(&smartq_lcd_control_gpiod_table);
-	gpiod_add_lookup_table(&smartq_usb_otg_vbus_gpiod_table);
-	platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices));
-
-	gpiod_add_lookup_table(&smartq_audio_gpios);
-	platform_device_register_simple("smartq-audio", -1, NULL, 0);
-}
diff --git a/arch/arm/mach-s3c/mach-smartq.h b/arch/arm/mach-s3c/mach-smartq.h
deleted file mode 100644
index f98132f4f430..000000000000
--- a/arch/arm/mach-s3c/mach-smartq.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * linux/arch/arm/mach-s3c64xx/mach-smartq.h
- *
- * Copyright (C) 2010 Maurus Cuelenaere
- */
-
-#ifndef __MACH_SMARTQ_H
-#define __MACH_SMARTQ_H __FILE__
-
-#include <linux/init.h>
-
-extern void __init smartq_map_io(void);
-extern void __init smartq_machine_init(void);
-
-#endif /* __MACH_SMARTQ_H */
diff --git a/arch/arm/mach-s3c/mach-smartq5.c b/arch/arm/mach-s3c/mach-smartq5.c
deleted file mode 100644
index ce3fce0bba20..000000000000
--- a/arch/arm/mach-s3c/mach-smartq5.c
+++ /dev/null
@@ -1,154 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2010 Maurus Cuelenaere
-
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <video/samsung_fimd.h>
-#include "irqs.h"
-#include "map.h"
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-
-#include "cpu.h"
-#include "devs.h"
-#include "fb.h"
-#include "gpio-cfg.h"
-
-#include "s3c64xx.h"
-#include "mach-smartq.h"
-
-static struct gpio_led smartq5_leds[] = {
-	{
-		.name			= "smartq5:green",
-		.active_low		= 1,
-		.gpio			= S3C64XX_GPN(8),
-	},
-	{
-		.name			= "smartq5:red",
-		.active_low		= 1,
-		.gpio			= S3C64XX_GPN(9),
-	},
-};
-
-static struct gpio_led_platform_data smartq5_led_data = {
-	.num_leds = ARRAY_SIZE(smartq5_leds),
-	.leds = smartq5_leds,
-};
-
-static struct platform_device smartq5_leds_device = {
-	.name			= "leds-gpio",
-	.id			= -1,
-	.dev.platform_data	= &smartq5_led_data,
-};
-
-/* Labels according to the SmartQ manual */
-static struct gpio_keys_button smartq5_buttons[] = {
-	{
-		.gpio			= S3C64XX_GPL(14),
-		.code			= KEY_POWER,
-		.desc			= "Power",
-		.active_low		= 1,
-		.debounce_interval	= 5,
-		.type                   = EV_KEY,
-	},
-	{
-		.gpio			= S3C64XX_GPN(2),
-		.code			= KEY_KPMINUS,
-		.desc			= "Minus",
-		.active_low		= 1,
-		.debounce_interval	= 5,
-		.type                   = EV_KEY,
-	},
-	{
-		.gpio			= S3C64XX_GPN(12),
-		.code			= KEY_KPPLUS,
-		.desc			= "Plus",
-		.active_low		= 1,
-		.debounce_interval	= 5,
-		.type                   = EV_KEY,
-	},
-	{
-		.gpio			= S3C64XX_GPN(15),
-		.code			= KEY_ENTER,
-		.desc			= "Move",
-		.active_low		= 1,
-		.debounce_interval	= 5,
-		.type                   = EV_KEY,
-	},
-};
-
-static struct gpio_keys_platform_data smartq5_buttons_data  = {
-	.buttons	= smartq5_buttons,
-	.nbuttons	= ARRAY_SIZE(smartq5_buttons),
-};
-
-static struct platform_device smartq5_buttons_device  = {
-	.name		= "gpio-keys",
-	.id		= 0,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &smartq5_buttons_data,
-	}
-};
-
-static struct s3c_fb_pd_win smartq5_fb_win0 = {
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-	.xres		= 800,
-	.yres		= 480,
-};
-
-static struct fb_videomode smartq5_lcd_timing = {
-	.left_margin	= 216,
-	.right_margin	= 40,
-	.upper_margin	= 35,
-	.lower_margin	= 10,
-	.hsync_len	= 1,
-	.vsync_len	= 1,
-	.xres		= 800,
-	.yres		= 480,
-	.refresh	= 80,
-};
-
-static struct s3c_fb_platdata smartq5_lcd_pdata __initdata = {
-	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
-	.vtiming	= &smartq5_lcd_timing,
-	.win[0]		= &smartq5_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
-			  VIDCON1_INV_VDEN,
-};
-
-static struct platform_device *smartq5_devices[] __initdata = {
-	&smartq5_leds_device,
-	&smartq5_buttons_device,
-};
-
-static void __init smartq5_machine_init(void)
-{
-	s3c_fb_set_platdata(&smartq5_lcd_pdata);
-
-	smartq_machine_init();
-
-	platform_add_devices(smartq5_devices, ARRAY_SIZE(smartq5_devices));
-}
-
-MACHINE_START(SMARTQ5, "SmartQ 5")
-	/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= S3C64XX_NR_IRQS,
-	.init_irq	= s3c6410_init_irq,
-	.map_io		= smartq_map_io,
-	.init_machine	= smartq5_machine_init,
-	.init_time	= s3c64xx_timer_init,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-smartq7.c b/arch/arm/mach-s3c/mach-smartq7.c
deleted file mode 100644
index 78ca0e704797..000000000000
--- a/arch/arm/mach-s3c/mach-smartq7.c
+++ /dev/null
@@ -1,170 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (C) 2010 Maurus Cuelenaere
-
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <video/samsung_fimd.h>
-#include "irqs.h"
-#include "map.h"
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-
-#include "cpu.h"
-#include "devs.h"
-#include "fb.h"
-#include "gpio-cfg.h"
-
-#include "s3c64xx.h"
-#include "mach-smartq.h"
-
-static struct gpio_led smartq7_leds[] = {
-	{
-		.name			= "smartq7:red",
-		.active_low		= 1,
-		.gpio			= S3C64XX_GPN(8),
-	},
-	{
-		.name			= "smartq7:green",
-		.active_low		= 1,
-		.gpio			= S3C64XX_GPN(9),
-	},
-};
-
-static struct gpio_led_platform_data smartq7_led_data = {
-	.num_leds = ARRAY_SIZE(smartq7_leds),
-	.leds = smartq7_leds,
-};
-
-static struct platform_device smartq7_leds_device = {
-	.name			= "leds-gpio",
-	.id			= -1,
-	.dev.platform_data	= &smartq7_led_data,
-};
-
-/* Labels according to the SmartQ manual */
-static struct gpio_keys_button smartq7_buttons[] = {
-	{
-		.gpio			= S3C64XX_GPL(14),
-		.code			= KEY_POWER,
-		.desc			= "Power",
-		.active_low		= 1,
-		.debounce_interval	= 5,
-		.type                   = EV_KEY,
-	},
-	{
-		.gpio			= S3C64XX_GPN(2),
-		.code			= KEY_FN,
-		.desc			= "Function",
-		.active_low		= 1,
-		.debounce_interval	= 5,
-		.type                   = EV_KEY,
-	},
-	{
-		.gpio			= S3C64XX_GPN(3),
-		.code			= KEY_KPMINUS,
-		.desc			= "Minus",
-		.active_low		= 1,
-		.debounce_interval	= 5,
-		.type                   = EV_KEY,
-	},
-	{
-		.gpio			= S3C64XX_GPN(4),
-		.code			= KEY_KPPLUS,
-		.desc			= "Plus",
-		.active_low		= 1,
-		.debounce_interval	= 5,
-		.type                   = EV_KEY,
-	},
-	{
-		.gpio			= S3C64XX_GPN(12),
-		.code			= KEY_ENTER,
-		.desc			= "Enter",
-		.active_low		= 1,
-		.debounce_interval	= 5,
-		.type                   = EV_KEY,
-	},
-	{
-		.gpio			= S3C64XX_GPN(15),
-		.code			= KEY_ESC,
-		.desc			= "Cancel",
-		.active_low		= 1,
-		.debounce_interval	= 5,
-		.type                   = EV_KEY,
-	},
-};
-
-static struct gpio_keys_platform_data smartq7_buttons_data  = {
-	.buttons	= smartq7_buttons,
-	.nbuttons	= ARRAY_SIZE(smartq7_buttons),
-};
-
-static struct platform_device smartq7_buttons_device  = {
-	.name		= "gpio-keys",
-	.id		= 0,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &smartq7_buttons_data,
-	}
-};
-
-static struct s3c_fb_pd_win smartq7_fb_win0 = {
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-	.xres		= 800,
-	.yres		= 480,
-};
-
-static struct fb_videomode smartq7_lcd_timing = {
-	.left_margin	= 3,
-	.right_margin	= 5,
-	.upper_margin	= 1,
-	.lower_margin	= 20,
-	.hsync_len	= 10,
-	.vsync_len	= 3,
-	.xres		= 800,
-	.yres		= 480,
-	.refresh	= 80,
-};
-
-static struct s3c_fb_platdata smartq7_lcd_pdata __initdata = {
-	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
-	.vtiming	= &smartq7_lcd_timing,
-	.win[0]		= &smartq7_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
-			  VIDCON1_INV_VCLK,
-};
-
-static struct platform_device *smartq7_devices[] __initdata = {
-	&smartq7_leds_device,
-	&smartq7_buttons_device,
-};
-
-static void __init smartq7_machine_init(void)
-{
-	s3c_fb_set_platdata(&smartq7_lcd_pdata);
-
-	smartq_machine_init();
-
-	platform_add_devices(smartq7_devices, ARRAY_SIZE(smartq7_devices));
-}
-
-MACHINE_START(SMARTQ7, "SmartQ 7")
-	/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= S3C64XX_NR_IRQS,
-	.init_irq	= s3c6410_init_irq,
-	.map_io		= smartq_map_io,
-	.init_machine	= smartq7_machine_init,
-	.init_time	= s3c64xx_timer_init,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-smdk2410.c b/arch/arm/mach-s3c/mach-smdk2410.c
deleted file mode 100644
index 76b0a8846616..000000000000
--- a/arch/arm/mach-s3c/mach-smdk2410.c
+++ /dev/null
@@ -1,112 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (C) 2004 by FS Forth-Systeme GmbH
-// All rights reserved.
-//
-// @Author: Jonas Dietsche
-//
-// @History:
-// derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
-// Ben Dooks <ben@simtec.co.uk>
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include "gpio-samsung.h"
-#include "gpio-cfg.h"
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include "devs.h"
-#include "cpu.h"
-
-#include "s3c24xx.h"
-#include "common-smdk-s3c24xx.h"
-
-static struct map_desc smdk2410_iodesc[] __initdata = {
-  /* nothing here yet */
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg smdk2410_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	}
-};
-
-static struct platform_device *smdk2410_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-};
-
-static void __init smdk2410_map_io(void)
-{
-	s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc));
-	s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init smdk2410_init_time(void)
-{
-	s3c2410_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-static void __init smdk2410_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	platform_add_devices(smdk2410_devices, ARRAY_SIZE(smdk2410_devices));
-	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
-	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
-			      S3C_GPIO_PULL_NONE);
-	smdk_machine_init();
-}
-
-MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switch
-				    * to SMDK2410 */
-	/* Maintainer: Jonas Dietsche */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2410,
-	.map_io		= smdk2410_map_io,
-	.init_irq	= s3c2410_init_irq,
-	.init_machine	= smdk2410_init,
-	.init_time	= smdk2410_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-smdk2413.c b/arch/arm/mach-s3c/mach-smdk2413.c
deleted file mode 100644
index 2b4e20aaa346..000000000000
--- a/arch/arm/mach-s3c/mach-smdk2413.c
+++ /dev/null
@@ -1,169 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2006 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// Thanks to Dimity Andric (TomTom) and Steven Ryu (Samsung) for the
-// loans of SMDK2413 to work with.
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio/machine.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/memblock.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/hardware/iomd.h>
-#include <asm/setup.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-//#include <asm/debug-ll.h>
-#include "hardware-s3c24xx.h"
-#include "regs-gpio.h"
-
-#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/fb-s3c2410.h>
-#include "gpio-samsung.h"
-#include "gpio-cfg.h"
-
-#include "devs.h"
-#include "cpu.h"
-
-#include "s3c24xx.h"
-#include "common-smdk-s3c24xx.h"
-
-static struct map_desc smdk2413_iodesc[] __initdata = {
-};
-
-static struct s3c2410_uartcfg smdk2413_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	/* IR port */
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x43,
-		.ufcon	     = 0x51,
-	}
-};
-
-
-static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = {
-};
-
-static struct gpiod_lookup_table smdk2413_udc_gpio_table = {
-	.dev_id = "s3c2410-usbgadget",
-	.table = {
-		GPIO_LOOKUP("GPIOF", 2, "pullup", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device *smdk2413_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-	&s3c_device_usbgadget,
-	&s3c2412_device_dma,
-};
-
-static void __init smdk2413_fixup(struct tag *tags, char **cmdline)
-{
-	if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) {
-		memblock_add(0x30000000, SZ_64M);
-	}
-}
-
-static void __init smdk2413_map_io(void)
-{
-	s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc));
-	s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init smdk2413_init_time(void)
-{
-	s3c2412_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-static void __init smdk2413_machine_init(void)
-{	/* Turn off suspend on both USB ports, and switch the
-	 * selectable USB port to USB device mode. */
-
-	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
-			      S3C2410_MISCCR_USBSUSPND0 |
-			      S3C2410_MISCCR_USBSUSPND1, 0x0);
-
-	gpiod_add_lookup_table(&smdk2413_udc_gpio_table);
- 	s3c24xx_udc_set_platdata(&smdk2413_udc_cfg);
-	s3c_i2c0_set_platdata(NULL);
-	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
-	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
-			      S3C_GPIO_PULL_NONE);
-
-	platform_add_devices(smdk2413_devices, ARRAY_SIZE(smdk2413_devices));
-	smdk_machine_init();
-}
-
-MACHINE_START(S3C2413, "S3C2413")
-	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2412,
-
-	.fixup		= smdk2413_fixup,
-	.init_irq	= s3c2412_init_irq,
-	.map_io		= smdk2413_map_io,
-	.init_machine	= smdk2413_machine_init,
-	.init_time	= s3c24xx_timer_init,
-MACHINE_END
-
-MACHINE_START(SMDK2412, "SMDK2412")
-	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2412,
-
-	.fixup		= smdk2413_fixup,
-	.init_irq	= s3c2412_init_irq,
-	.map_io		= smdk2413_map_io,
-	.init_machine	= smdk2413_machine_init,
-	.init_time	= s3c24xx_timer_init,
-MACHINE_END
-
-MACHINE_START(SMDK2413, "SMDK2413")
-	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2412,
-
-	.fixup		= smdk2413_fixup,
-	.init_irq	= s3c2412_init_irq,
-	.map_io		= smdk2413_map_io,
-	.init_machine	= smdk2413_machine_init,
-	.init_time	= smdk2413_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-smdk2416.c b/arch/arm/mach-s3c/mach-smdk2416.c
deleted file mode 100644
index 329fe26be268..000000000000
--- a/arch/arm/mach-s3c/mach-smdk2416.c
+++ /dev/null
@@ -1,248 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
-//	as part of OpenInkpot project
-// Copyright (c) 2009 Promwad Innovation Company
-//	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/mtd/partitions.h>
-#include <linux/gpio.h>
-#include <linux/fb.h>
-#include <linux/delay.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <video/samsung_fimd.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include "hardware-s3c24xx.h"
-#include "regs-gpio.h"
-#include "regs-s3c2443-clock.h"
-#include "gpio-samsung.h"
-
-#include <linux/platform_data/leds-s3c24xx.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include "gpio-cfg.h"
-#include "devs.h"
-#include "cpu.h"
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include "sdhci.h"
-#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <linux/platform_data/s3c-hsudc.h>
-
-#include "fb.h"
-
-#include "s3c24xx.h"
-#include "common-smdk-s3c24xx.h"
-
-static struct map_desc smdk2416_iodesc[] __initdata = {
-	/* ISA IO Space map (memory space selected by A24) */
-
-	{
-		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
-		.pfn		= __phys_to_pfn(S3C2410_CS2),
-		.length		= 0x10000,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
-		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
-		.length		= SZ_4M,
-		.type		= MT_DEVICE,
-	}
-};
-
-#define UCON (S3C2410_UCON_DEFAULT	| \
-		S3C2440_UCON_PCLK	| \
-		S3C2443_UCON_RXERR_IRQEN)
-
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
-
-#define UFCON (S3C2410_UFCON_RXTRIG8	| \
-		S3C2410_UFCON_FIFOMODE	| \
-		S3C2440_UFCON_TXTRIG16)
-
-static struct s3c2410_uartcfg smdk2416_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	/* IR port */
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON | 0x50,
-		.ufcon	     = UFCON,
-	},
-	[3] = {
-		.hwport	     = 3,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	}
-};
-
-static void smdk2416_hsudc_gpio_init(void)
-{
-	s3c_gpio_setpull(S3C2410_GPH(14), S3C_GPIO_PULL_UP);
-	s3c_gpio_setpull(S3C2410_GPF(2), S3C_GPIO_PULL_NONE);
-	s3c_gpio_cfgpin(S3C2410_GPH(14), S3C_GPIO_SFN(1));
-	s3c2410_modify_misccr(S3C2416_MISCCR_SEL_SUSPND, 0);
-}
-
-static void smdk2416_hsudc_gpio_uninit(void)
-{
-	s3c2410_modify_misccr(S3C2416_MISCCR_SEL_SUSPND, 1);
-	s3c_gpio_setpull(S3C2410_GPH(14), S3C_GPIO_PULL_NONE);
-	s3c_gpio_cfgpin(S3C2410_GPH(14), S3C_GPIO_SFN(0));
-}
-
-static struct s3c24xx_hsudc_platdata smdk2416_hsudc_platdata = {
-	.epnum = 9,
-	.gpio_init = smdk2416_hsudc_gpio_init,
-	.gpio_uninit = smdk2416_hsudc_gpio_uninit,
-};
-
-static struct s3c_fb_pd_win smdk2416_fb_win[] = {
-	[0] = {
-		.default_bpp	= 16,
-		.max_bpp	= 32,
-		.xres           = 800,
-		.yres           = 480,
-	},
-};
-
-static struct fb_videomode smdk2416_lcd_timing = {
-	.pixclock	= 41094,
-	.left_margin	= 8,
-	.right_margin	= 13,
-	.upper_margin	= 7,
-	.lower_margin	= 5,
-	.hsync_len	= 3,
-	.vsync_len	= 1,
-	.xres           = 800,
-	.yres           = 480,
-};
-
-static void s3c2416_fb_gpio_setup_24bpp(void)
-{
-	unsigned int gpio;
-
-	for (gpio = S3C2410_GPC(1); gpio <= S3C2410_GPC(4); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	for (gpio = S3C2410_GPC(8); gpio <= S3C2410_GPC(15); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	for (gpio = S3C2410_GPD(0); gpio <= S3C2410_GPD(15); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-}
-
-static struct s3c_fb_platdata smdk2416_fb_platdata = {
-	.win[0]		= &smdk2416_fb_win[0],
-	.vtiming	= &smdk2416_lcd_timing,
-	.setup_gpio	= s3c2416_fb_gpio_setup_24bpp,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-};
-
-static struct s3c_sdhci_platdata smdk2416_hsmmc0_pdata __initdata = {
-	.max_width		= 4,
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= S3C2410_GPF(1),
-	.ext_cd_gpio_invert	= 1,
-};
-
-static struct s3c_sdhci_platdata smdk2416_hsmmc1_pdata __initdata = {
-	.max_width		= 4,
-	.cd_type		= S3C_SDHCI_CD_NONE,
-};
-
-static struct platform_device *smdk2416_devices[] __initdata = {
-	&s3c_device_fb,
-	&s3c_device_wdt,
-	&s3c_device_ohci,
-	&s3c_device_i2c0,
-	&s3c_device_hsmmc0,
-	&s3c_device_hsmmc1,
-	&s3c_device_usb_hsudc,
-	&s3c2443_device_dma,
-};
-
-static void __init smdk2416_init_time(void)
-{
-	s3c2416_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-static void __init smdk2416_map_io(void)
-{
-	s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc));
-	s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init smdk2416_machine_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	s3c_fb_set_platdata(&smdk2416_fb_platdata);
-
-	s3c_sdhci0_set_platdata(&smdk2416_hsmmc0_pdata);
-	s3c_sdhci1_set_platdata(&smdk2416_hsmmc1_pdata);
-
-	s3c24xx_hsudc_set_platdata(&smdk2416_hsudc_platdata);
-
-	gpio_request(S3C2410_GPB(4), "USBHost Power");
-	gpio_direction_output(S3C2410_GPB(4), 1);
-
-	gpio_request(S3C2410_GPB(3), "Display Power");
-	gpio_direction_output(S3C2410_GPB(3), 1);
-
-	gpio_request(S3C2410_GPB(1), "Display Reset");
-	gpio_direction_output(S3C2410_GPB(1), 1);
-
-	platform_add_devices(smdk2416_devices, ARRAY_SIZE(smdk2416_devices));
-	smdk_machine_init();
-}
-
-MACHINE_START(SMDK2416, "SMDK2416")
-	/* Maintainer: Yauhen Kharuzhy <jekhor@gmail.com> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2416,
-
-	.init_irq	= s3c2416_init_irq,
-	.map_io		= smdk2416_map_io,
-	.init_machine	= smdk2416_machine_init,
-	.init_time	= smdk2416_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-smdk2440.c b/arch/arm/mach-s3c/mach-smdk2440.c
deleted file mode 100644
index 6aea769ebde1..000000000000
--- a/arch/arm/mach-s3c/mach-smdk2440.c
+++ /dev/null
@@ -1,180 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// linux/arch/arm/mach-s3c2440/mach-smdk2440.c
-//
-// Copyright (c) 2004-2005 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// http://www.fluff.org/ben/smdk2440/
-//
-// Thanks to Dimity Andric and TomTom for the loan of an SMDK2440.
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-#include "gpio-cfg.h"
-
-#include <linux/platform_data/fb-s3c2410.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include "devs.h"
-#include "cpu.h"
-
-#include "s3c24xx.h"
-#include "common-smdk-s3c24xx.h"
-
-static struct map_desc smdk2440_iodesc[] __initdata = {
-	/* ISA IO Space map (memory space selected by A24) */
-
-	{
-		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
-		.pfn		= __phys_to_pfn(S3C2410_CS2),
-		.length		= 0x10000,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
-		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
-		.length		= SZ_4M,
-		.type		= MT_DEVICE,
-	}
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg smdk2440_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	/* IR port */
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x43,
-		.ufcon	     = 0x51,
-	}
-};
-
-/* LCD driver info */
-
-static struct s3c2410fb_display smdk2440_lcd_cfg __initdata = {
-
-	.lcdcon5	= S3C2410_LCDCON5_FRM565 |
-			  S3C2410_LCDCON5_INVVLINE |
-			  S3C2410_LCDCON5_INVVFRAME |
-			  S3C2410_LCDCON5_PWREN |
-			  S3C2410_LCDCON5_HWSWP,
-
-	.type		= S3C2410_LCDCON1_TFT,
-
-	.width		= 240,
-	.height		= 320,
-
-	.pixclock	= 166667, /* HCLK 60 MHz, divisor 10 */
-	.xres		= 240,
-	.yres		= 320,
-	.bpp		= 16,
-	.left_margin	= 20,
-	.right_margin	= 8,
-	.hsync_len	= 4,
-	.upper_margin	= 8,
-	.lower_margin	= 7,
-	.vsync_len	= 4,
-};
-
-static struct s3c2410fb_mach_info smdk2440_fb_info __initdata = {
-	.displays	= &smdk2440_lcd_cfg,
-	.num_displays	= 1,
-	.default_display = 0,
-
-#if 0
-	/* currently setup by downloader */
-	.gpccon		= 0xaa940659,
-	.gpccon_mask	= 0xffffffff,
-	.gpcup		= 0x0000ffff,
-	.gpcup_mask	= 0xffffffff,
-	.gpdcon		= 0xaa84aaa0,
-	.gpdcon_mask	= 0xffffffff,
-	.gpdup		= 0x0000faff,
-	.gpdup_mask	= 0xffffffff,
-
-	.gpccon_reg	= S3C2410_GPCCON,
-	.gpcup_reg	= S3C2410_GPCUP,
-	.gpdcon_reg	= S3C2410_GPDCON,
-	.gpdup_reg	= S3C2410_GPDUP,
-#endif
-
-	.lpcsel		= ((0xCE6) & ~7) | 1<<4,
-};
-
-static struct platform_device *smdk2440_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-};
-
-static void __init smdk2440_map_io(void)
-{
-	s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
-	s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init smdk2440_init_time(void)
-{
-	s3c2440_init_clocks(16934400);
-	s3c24xx_timer_init();
-}
-
-static void __init smdk2440_machine_init(void)
-{
-	s3c24xx_fb_set_platdata(&smdk2440_fb_info);
-	s3c_i2c0_set_platdata(NULL);
-	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
-	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
-			      S3C_GPIO_PULL_NONE);
-	platform_add_devices(smdk2440_devices, ARRAY_SIZE(smdk2440_devices));
-	smdk_machine_init();
-}
-
-MACHINE_START(S3C2440, "SMDK2440")
-	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2440,
-
-	.init_irq	= s3c2440_init_irq,
-	.map_io		= smdk2440_map_io,
-	.init_machine	= smdk2440_machine_init,
-	.init_time	= smdk2440_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-smdk2443.c b/arch/arm/mach-s3c/mach-smdk2443.c
deleted file mode 100644
index 075140f8f760..000000000000
--- a/arch/arm/mach-s3c/mach-smdk2443.c
+++ /dev/null
@@ -1,126 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2007 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// http://www.fluff.org/ben/smdk2443/
-//
-// Thanks to Samsung for the loan of an SMDK2443
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include "regs-gpio.h"
-
-#include <linux/platform_data/fb-s3c2410.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include "devs.h"
-#include "cpu.h"
-
-#include "s3c24xx.h"
-#include "common-smdk-s3c24xx.h"
-
-static struct map_desc smdk2443_iodesc[] __initdata = {
-	/* ISA IO Space map (memory space selected by A24) */
-
-	{
-		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
-		.pfn		= __phys_to_pfn(S3C2410_CS2),
-		.length		= 0x10000,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
-		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
-		.length		= SZ_4M,
-		.type		= MT_DEVICE,
-	}
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg smdk2443_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	/* IR port */
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x43,
-		.ufcon	     = 0x51,
-	},
-	[3] = {
-		.hwport	     = 3,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	}
-};
-
-static struct platform_device *smdk2443_devices[] __initdata = {
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_hsmmc1,
-	&s3c2443_device_dma,
-};
-
-static void __init smdk2443_map_io(void)
-{
-	s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc));
-	s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init smdk2443_init_time(void)
-{
-	s3c2443_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-static void __init smdk2443_machine_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	platform_add_devices(smdk2443_devices, ARRAY_SIZE(smdk2443_devices));
-	smdk_machine_init();
-}
-
-MACHINE_START(SMDK2443, "SMDK2443")
-	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2443,
-	.init_irq	= s3c2443_init_irq,
-	.map_io		= smdk2443_map_io,
-	.init_machine	= smdk2443_machine_init,
-	.init_time	= smdk2443_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-smdk6400.c b/arch/arm/mach-s3c/mach-smdk6400.c
deleted file mode 100644
index a3c1b2a82455..000000000000
--- a/arch/arm/mach-s3c/mach-smdk6400.c
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2008 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//	http://armlinux.simtec.co.uk/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "irqs.h"
-#include "map.h"
-
-#include "devs.h"
-#include "cpu.h"
-#include <linux/platform_data/i2c-s3c2410.h>
-#include "gpio-samsung.h"
-
-#include "s3c64xx.h"
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg smdk6400_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-};
-
-static struct map_desc smdk6400_iodesc[] = {};
-
-static void __init smdk6400_map_io(void)
-{
-	s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
-	s3c64xx_set_xtal_freq(12000000);
-	s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
-	s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
-}
-
-static struct platform_device *smdk6400_devices[] __initdata = {
-	&s3c_device_hsmmc1,
-	&s3c_device_i2c0,
-};
-
-static struct i2c_board_info i2c_devs[] __initdata = {
-	{ I2C_BOARD_INFO("wm8753", 0x1A), },
-	{ I2C_BOARD_INFO("24c08", 0x50), },
-};
-
-static void __init smdk6400_machine_init(void)
-{
-	i2c_register_board_info(0, i2c_devs, ARRAY_SIZE(i2c_devs));
-	platform_add_devices(smdk6400_devices, ARRAY_SIZE(smdk6400_devices));
-}
-
-MACHINE_START(SMDK6400, "SMDK6400")
-	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= S3C64XX_NR_IRQS,
-	.init_irq	= s3c6400_init_irq,
-	.map_io		= smdk6400_map_io,
-	.init_machine	= smdk6400_machine_init,
-	.init_time	= s3c64xx_timer_init,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-smdk6410.c b/arch/arm/mach-s3c/mach-smdk6410.c
deleted file mode 100644
index e57b2bb61484..000000000000
--- a/arch/arm/mach-s3c/mach-smdk6410.c
+++ /dev/null
@@ -1,706 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2008 Openmoko, Inc.
-// Copyright 2008 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//	http://armlinux.simtec.co.uk/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/smsc911x.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/platform_data/s3c-hsotg.h>
-
-#ifdef CONFIG_SMDK6410_WM1190_EV1
-#include <linux/mfd/wm8350/core.h>
-#include <linux/mfd/wm8350/pmic.h>
-#endif
-
-#ifdef CONFIG_SMDK6410_WM1192_EV1
-#include <linux/mfd/wm831x/core.h>
-#include <linux/mfd/wm831x/pdata.h>
-#endif
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "irqs.h"
-#include "map.h"
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-#include <linux/platform_data/ata-samsung_cf.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include "fb.h"
-#include "gpio-cfg.h"
-
-#include "devs.h"
-#include "cpu.h"
-#include <linux/soc/samsung/s3c-adc.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
-#include "keypad.h"
-
-#include "backlight-s3c64xx.h"
-#include "s3c64xx.h"
-#include "regs-modem-s3c64xx.h"
-#include "regs-srom-s3c64xx.h"
-#include "regs-sys-s3c64xx.h"
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg smdk6410_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[3] = {
-		.hwport	     = 3,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-};
-
-/* framebuffer and LCD setup. */
-
-/* GPF15 = LCD backlight control
- * GPF13 => Panel power
- * GPN5 = LCD nRESET signal
- * PWM_TOUT1 => backlight brightness
- */
-
-static void smdk6410_lcd_power_set(struct plat_lcd_data *pd,
-				   unsigned int power)
-{
-	if (power) {
-		gpio_direction_output(S3C64XX_GPF(13), 1);
-
-		/* fire nRESET on power up */
-		gpio_direction_output(S3C64XX_GPN(5), 0);
-		msleep(10);
-		gpio_direction_output(S3C64XX_GPN(5), 1);
-		msleep(1);
-	} else {
-		gpio_direction_output(S3C64XX_GPF(13), 0);
-	}
-}
-
-static struct plat_lcd_data smdk6410_lcd_power_data = {
-	.set_power	= smdk6410_lcd_power_set,
-};
-
-static struct platform_device smdk6410_lcd_powerdev = {
-	.name			= "platform-lcd",
-	.dev.parent		= &s3c_device_fb.dev,
-	.dev.platform_data	= &smdk6410_lcd_power_data,
-};
-
-static struct s3c_fb_pd_win smdk6410_fb_win0 = {
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-	.xres		= 800,
-	.yres		= 480,
-	.virtual_y	= 480 * 2,
-	.virtual_x	= 800,
-};
-
-static struct fb_videomode smdk6410_lcd_timing = {
-	.left_margin	= 8,
-	.right_margin	= 13,
-	.upper_margin	= 7,
-	.lower_margin	= 5,
-	.hsync_len	= 3,
-	.vsync_len	= 1,
-	.xres		= 800,
-	.yres		= 480,
-};
-
-/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
-static struct s3c_fb_platdata smdk6410_lcd_pdata __initdata = {
-	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
-	.vtiming	= &smdk6410_lcd_timing,
-	.win[0]		= &smdk6410_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-};
-
-/*
- * Configuring Ethernet on SMDK6410
- *
- * Both CS8900A and LAN9115 chips share one chip select mediated by CFG6.
- * The constant address below corresponds to nCS1
- *
- *  1) Set CFGB2 p3 ON others off, no other CFGB selects "ethernet"
- *  2) CFG6 needs to be switched to "LAN9115" side
- */
-
-static struct resource smdk6410_smsc911x_resources[] = {
-	[0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1, SZ_64K),
-	[1] = DEFINE_RES_NAMED(S3C_EINT(10), 1, NULL, IORESOURCE_IRQ \
-					| IRQ_TYPE_LEVEL_LOW),
-};
-
-static struct smsc911x_platform_config smdk6410_smsc911x_pdata = {
-	.irq_polarity  = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type      = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
-	.flags         = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
-	.phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-
-static struct platform_device smdk6410_smsc911x = {
-	.name          = "smsc911x",
-	.id            = -1,
-	.num_resources = ARRAY_SIZE(smdk6410_smsc911x_resources),
-	.resource      = &smdk6410_smsc911x_resources[0],
-	.dev = {
-		.platform_data = &smdk6410_smsc911x_pdata,
-	},
-};
-
-#ifdef CONFIG_REGULATOR
-static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] = {
-	REGULATOR_SUPPLY("PVDD", "0-001b"),
-	REGULATOR_SUPPLY("AVDD", "0-001b"),
-};
-
-static struct regulator_init_data __maybe_unused smdk6410_b_pwr_5v_data = {
-	.constraints = {
-		.always_on = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(smdk6410_b_pwr_5v_consumers),
-	.consumer_supplies = smdk6410_b_pwr_5v_consumers,
-};
-
-static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = {
-	.supply_name = "B_PWR_5V",
-	.microvolts = 5000000,
-	.init_data = &smdk6410_b_pwr_5v_data,
-};
-
-static struct platform_device smdk6410_b_pwr_5v = {
-	.name          = "reg-fixed-voltage",
-	.id            = -1,
-	.dev = {
-		.platform_data = &smdk6410_b_pwr_5v_pdata,
-	},
-};
-#endif
-
-static struct s3c_ide_platdata smdk6410_ide_pdata __initdata = {
-	.setup_gpio	= s3c64xx_ide_setup_gpio,
-};
-
-static uint32_t smdk6410_keymap[] __initdata = {
-	/* KEY(row, col, keycode) */
-	KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
-	KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
-	KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
-	KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
-};
-
-static struct matrix_keymap_data smdk6410_keymap_data __initdata = {
-	.keymap		= smdk6410_keymap,
-	.keymap_size	= ARRAY_SIZE(smdk6410_keymap),
-};
-
-static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = {
-	.keymap_data	= &smdk6410_keymap_data,
-	.rows		= 2,
-	.cols		= 8,
-};
-
-static struct map_desc smdk6410_iodesc[] = {};
-
-static struct platform_device *smdk6410_devices[] __initdata = {
-#ifdef CONFIG_SMDK6410_SD_CH0
-	&s3c_device_hsmmc0,
-#endif
-#ifdef CONFIG_SMDK6410_SD_CH1
-	&s3c_device_hsmmc1,
-#endif
-	&s3c_device_i2c0,
-	&s3c_device_i2c1,
-	&s3c_device_fb,
-	&s3c_device_ohci,
-	&samsung_device_pwm,
-	&s3c_device_usb_hsotg,
-	&s3c64xx_device_iisv4,
-	&samsung_device_keypad,
-
-#ifdef CONFIG_REGULATOR
-	&smdk6410_b_pwr_5v,
-#endif
-	&smdk6410_lcd_powerdev,
-
-	&smdk6410_smsc911x,
-	&s3c_device_adc,
-	&s3c_device_cfcon,
-	&s3c_device_rtc,
-	&s3c_device_wdt,
-};
-
-#ifdef CONFIG_REGULATOR
-/* ARM core */
-static struct regulator_consumer_supply smdk6410_vddarm_consumers[] = {
-	REGULATOR_SUPPLY("vddarm", NULL),
-};
-
-/* VDDARM, BUCK1 on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vddarm = {
-	.constraints = {
-		.name = "PVDD_ARM",
-		.min_uV = 1000000,
-		.max_uV = 1300000,
-		.always_on = 1,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(smdk6410_vddarm_consumers),
-	.consumer_supplies = smdk6410_vddarm_consumers,
-};
-
-/* VDD_INT, BUCK2 on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vddint = {
-	.constraints = {
-		.name = "PVDD_INT",
-		.min_uV = 1000000,
-		.max_uV = 1200000,
-		.always_on = 1,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-	},
-};
-
-/* VDD_HI, LDO3 on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vddhi = {
-	.constraints = {
-		.name = "PVDD_HI",
-		.always_on = 1,
-	},
-};
-
-/* VDD_PLL, LDO2 on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vddpll = {
-	.constraints = {
-		.name = "PVDD_PLL",
-		.always_on = 1,
-	},
-};
-
-/* VDD_UH_MMC, LDO5 on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vdduh_mmc = {
-	.constraints = {
-		.name = "PVDD_UH+PVDD_MMC",
-		.always_on = 1,
-	},
-};
-
-/* VCCM3BT, LDO8 on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vccmc3bt = {
-	.constraints = {
-		.name = "PVCCM3BT",
-		.always_on = 1,
-	},
-};
-
-/* VCCM2MTV, LDO11 on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vccm2mtv = {
-	.constraints = {
-		.name = "PVCCM2MTV",
-		.always_on = 1,
-	},
-};
-
-/* VDD_LCD, LDO12 on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vddlcd = {
-	.constraints = {
-		.name = "PVDD_LCD",
-		.always_on = 1,
-	},
-};
-
-/* VDD_OTGI, LDO9 on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vddotgi = {
-	.constraints = {
-		.name = "PVDD_OTGI",
-		.always_on = 1,
-	},
-};
-
-/* VDD_OTG, LDO14 on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vddotg = {
-	.constraints = {
-		.name = "PVDD_OTG",
-		.always_on = 1,
-	},
-};
-
-/* VDD_ALIVE, LDO15 on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vddalive = {
-	.constraints = {
-		.name = "PVDD_ALIVE",
-		.always_on = 1,
-	},
-};
-
-/* VDD_AUDIO, VLDO_AUDIO on J5 */
-static struct regulator_init_data __maybe_unused smdk6410_vddaudio = {
-	.constraints = {
-		.name = "PVDD_AUDIO",
-		.always_on = 1,
-	},
-};
-#endif
-
-#ifdef CONFIG_SMDK6410_WM1190_EV1
-/* S3C64xx internal logic & PLL */
-static struct regulator_init_data __maybe_unused wm8350_dcdc1_data = {
-	.constraints = {
-		.name = "PVDD_INT+PVDD_PLL",
-		.min_uV = 1200000,
-		.max_uV = 1200000,
-		.always_on = 1,
-		.apply_uV = 1,
-	},
-};
-
-/* Memory */
-static struct regulator_init_data __maybe_unused wm8350_dcdc3_data = {
-	.constraints = {
-		.name = "PVDD_MEM",
-		.min_uV = 1800000,
-		.max_uV = 1800000,
-		.always_on = 1,
-		.state_mem = {
-			 .uV = 1800000,
-			 .mode = REGULATOR_MODE_NORMAL,
-			 .enabled = 1,
-		},
-		.initial_state = PM_SUSPEND_MEM,
-	},
-};
-
-/* USB, EXT, PCM, ADC/DAC, USB, MMC */
-static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = {
-	REGULATOR_SUPPLY("DVDD", "0-001b"),
-};
-
-static struct regulator_init_data __maybe_unused wm8350_dcdc4_data = {
-	.constraints = {
-		.name = "PVDD_HI+PVDD_EXT+PVDD_SYS+PVCCM2MTV",
-		.min_uV = 3000000,
-		.max_uV = 3000000,
-		.always_on = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(wm8350_dcdc4_consumers),
-	.consumer_supplies = wm8350_dcdc4_consumers,
-};
-
-/* OTGi/1190-EV1 HPVDD & AVDD */
-static struct regulator_init_data __maybe_unused wm8350_ldo4_data = {
-	.constraints = {
-		.name = "PVDD_OTGI+HPVDD+AVDD",
-		.min_uV = 1200000,
-		.max_uV = 1200000,
-		.apply_uV = 1,
-		.always_on = 1,
-	},
-};
-
-static struct {
-	int regulator;
-	struct regulator_init_data *initdata;
-} wm1190_regulators[] = {
-	{ WM8350_DCDC_1, &wm8350_dcdc1_data },
-	{ WM8350_DCDC_3, &wm8350_dcdc3_data },
-	{ WM8350_DCDC_4, &wm8350_dcdc4_data },
-	{ WM8350_DCDC_6, &smdk6410_vddarm },
-	{ WM8350_LDO_1, &smdk6410_vddalive },
-	{ WM8350_LDO_2, &smdk6410_vddotg },
-	{ WM8350_LDO_3, &smdk6410_vddlcd },
-	{ WM8350_LDO_4, &wm8350_ldo4_data },
-};
-
-static int __init smdk6410_wm8350_init(struct wm8350 *wm8350)
-{
-	int i;
-
-	/* Configure the IRQ line */
-	s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
-
-	/* Instantiate the regulators */
-	for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++)
-		wm8350_register_regulator(wm8350,
-					  wm1190_regulators[i].regulator,
-					  wm1190_regulators[i].initdata);
-
-	return 0;
-}
-
-static struct wm8350_platform_data __initdata smdk6410_wm8350_pdata = {
-	.init = smdk6410_wm8350_init,
-	.irq_high = 1,
-	.irq_base = IRQ_BOARD_START,
-};
-#endif
-
-#ifdef CONFIG_SMDK6410_WM1192_EV1
-static struct gpio_led wm1192_pmic_leds[] = {
-	{
-		.name = "PMIC:red:power",
-		.gpio = GPIO_BOARD_START + 3,
-		.default_state = LEDS_GPIO_DEFSTATE_ON,
-	},
-};
-
-static struct gpio_led_platform_data wm1192_pmic_led = {
-	.num_leds = ARRAY_SIZE(wm1192_pmic_leds),
-	.leds = wm1192_pmic_leds,
-};
-
-static struct platform_device wm1192_pmic_led_dev = {
-	.name          = "leds-gpio",
-	.id            = -1,
-	.dev = {
-		.platform_data = &wm1192_pmic_led,
-	},
-};
-
-static int wm1192_pre_init(struct wm831x *wm831x)
-{
-	int ret;
-
-	/* Configure the IRQ line */
-	s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
-
-	ret = platform_device_register(&wm1192_pmic_led_dev);
-	if (ret != 0)
-		dev_err(wm831x->dev, "Failed to add PMIC LED: %d\n", ret);
-
-	return 0;
-}
-
-static struct wm831x_backlight_pdata wm1192_backlight_pdata = {
-	.isink = 1,
-	.max_uA = 27554,
-};
-
-static struct regulator_init_data __maybe_unused wm1192_dcdc3 = {
-	.constraints = {
-		.name = "PVDD_MEM+PVDD_GPS",
-		.always_on = 1,
-	},
-};
-
-static struct regulator_consumer_supply wm1192_ldo1_consumers[] = {
-	REGULATOR_SUPPLY("DVDD", "0-001b"),   /* WM8580 */
-};
-
-static struct regulator_init_data __maybe_unused wm1192_ldo1 = {
-	.constraints = {
-		.name = "PVDD_LCD+PVDD_EXT",
-		.always_on = 1,
-	},
-	.consumer_supplies = wm1192_ldo1_consumers,
-	.num_consumer_supplies = ARRAY_SIZE(wm1192_ldo1_consumers),
-};
-
-static struct wm831x_status_pdata wm1192_led7_pdata = {
-	.name = "LED7:green:",
-};
-
-static struct wm831x_status_pdata wm1192_led8_pdata = {
-	.name = "LED8:green:",
-};
-
-static struct wm831x_pdata smdk6410_wm1192_pdata = {
-	.pre_init = wm1192_pre_init,
-
-	.backlight = &wm1192_backlight_pdata,
-	.dcdc = {
-		&smdk6410_vddarm,  /* DCDC1 */
-		&smdk6410_vddint,  /* DCDC2 */
-		&wm1192_dcdc3,
-	},
-	.gpio_base = GPIO_BOARD_START,
-	.ldo = {
-		 &wm1192_ldo1,        /* LDO1 */
-		 &smdk6410_vdduh_mmc, /* LDO2 */
-		 NULL,                /* LDO3 NC */
-		 &smdk6410_vddotgi,   /* LDO4 */
-		 &smdk6410_vddotg,    /* LDO5 */
-		 &smdk6410_vddhi,     /* LDO6 */
-		 &smdk6410_vddaudio,  /* LDO7 */
-		 &smdk6410_vccm2mtv,  /* LDO8 */
-		 &smdk6410_vddpll,    /* LDO9 */
-		 &smdk6410_vccmc3bt,  /* LDO10 */
-		 &smdk6410_vddalive,  /* LDO11 */
-	},
-	.status = {
-		&wm1192_led7_pdata,
-		&wm1192_led8_pdata,
-	},
-};
-#endif
-
-static struct i2c_board_info i2c_devs0[] __initdata = {
-	{ I2C_BOARD_INFO("24c08", 0x50), },
-	{ I2C_BOARD_INFO("wm8580", 0x1b), },
-
-#ifdef CONFIG_SMDK6410_WM1192_EV1
-	{ I2C_BOARD_INFO("wm8312", 0x34),
-	  .platform_data = &smdk6410_wm1192_pdata,
-	  .irq = S3C_EINT(12),
-	},
-#endif
-
-#ifdef CONFIG_SMDK6410_WM1190_EV1
-	{ I2C_BOARD_INFO("wm8350", 0x1a),
-	  .platform_data = &smdk6410_wm8350_pdata,
-	  .irq = S3C_EINT(12),
-	},
-#endif
-};
-
-static struct i2c_board_info i2c_devs1[] __initdata = {
-	{ I2C_BOARD_INFO("24c128", 0x57), },	/* Samsung S524AD0XD1 */
-};
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info smdk6410_bl_gpio_info = {
-	.no = S3C64XX_GPF(15),
-	.func = S3C_GPIO_SFN(2),
-};
-
-static struct pwm_lookup smdk6410_pwm_lookup[] = {
-	PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL, 78770,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data smdk6410_bl_data = {
-	/* Intentionally blank */
-};
-
-static struct dwc2_hsotg_plat smdk6410_hsotg_pdata;
-
-static void __init smdk6410_map_io(void)
-{
-	u32 tmp;
-
-	s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
-	s3c64xx_set_xtal_freq(12000000);
-	s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
-	s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
-
-	/* set the LCD type */
-
-	tmp = __raw_readl(S3C64XX_SPCON);
-	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
-	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
-	__raw_writel(tmp, S3C64XX_SPCON);
-
-	/* remove the lcd bypass */
-	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
-	tmp &= ~MIFPCON_LCD_BYPASS;
-	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
-}
-
-static void __init smdk6410_machine_init(void)
-{
-	u32 cs1;
-
-	s3c_i2c0_set_platdata(NULL);
-	s3c_i2c1_set_platdata(NULL);
-	s3c_fb_set_platdata(&smdk6410_lcd_pdata);
-	dwc2_hsotg_set_platdata(&smdk6410_hsotg_pdata);
-
-	samsung_keypad_set_platdata(&smdk6410_keypad_data);
-
-	s3c64xx_ts_set_platdata(NULL);
-
-	/* configure nCS1 width to 16 bits */
-
-	cs1 = __raw_readl(S3C64XX_SROM_BW) &
-		    ~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
-	cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
-		(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
-		(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
-						   S3C64XX_SROM_BW__NCS1__SHIFT;
-	__raw_writel(cs1, S3C64XX_SROM_BW);
-
-	/* set timing for nCS1 suitable for ethernet chip */
-
-	__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
-		     (6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
-		     (4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
-		     (1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
-		     (0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
-		     (4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
-		     (0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
-
-	gpio_request(S3C64XX_GPN(5), "LCD power");
-	gpio_request(S3C64XX_GPF(13), "LCD power");
-
-	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
-	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
-
-	s3c_ide_set_platdata(&smdk6410_ide_pdata);
-
-	platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
-
-	pwm_add_table(smdk6410_pwm_lookup, ARRAY_SIZE(smdk6410_pwm_lookup));
-	samsung_bl_set(&smdk6410_bl_gpio_info, &smdk6410_bl_data);
-}
-
-MACHINE_START(SMDK6410, "SMDK6410")
-	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= S3C64XX_NR_IRQS,
-	.init_irq	= s3c6410_init_irq,
-	.map_io		= smdk6410_map_io,
-	.init_machine	= smdk6410_machine_init,
-	.init_time	= s3c64xx_timer_init,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-tct_hammer.c b/arch/arm/mach-s3c/mach-tct_hammer.c
deleted file mode 100644
index 93ab1abd8bd3..000000000000
--- a/arch/arm/mach-s3c/mach-tct_hammer.c
+++ /dev/null
@@ -1,157 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (c) 2007 TinCanTools
-//	David Anders <danders@amltd.com>
-//
-// @History:
-// derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
-// Ben Dooks <ben@simtec.co.uk>
-
-#include <linux/gpio/machine.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-#include "devs.h"
-#include "cpu.h"
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/physmap.h>
-
-#include "s3c24xx.h"
-
-static struct resource tct_hammer_nor_resource =
-			DEFINE_RES_MEM(0x00000000, SZ_16M);
-
-static struct mtd_partition tct_hammer_mtd_partitions[] = {
-	{
-		.name		= "System",
-		.size		= 0x240000,
-		.offset		= 0,
-		.mask_flags 	= MTD_WRITEABLE,  /* force read-only */
-	}, {
-		.name		= "JFFS2",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,
-	}
-};
-
-static struct physmap_flash_data tct_hammer_flash_data = {
-	.width		= 2,
-	.parts		= tct_hammer_mtd_partitions,
-	.nr_parts	= ARRAY_SIZE(tct_hammer_mtd_partitions),
-};
-
-static struct platform_device tct_hammer_device_nor = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev = {
-			.platform_data = &tct_hammer_flash_data,
-		},
-	.num_resources	= 1,
-	.resource	= &tct_hammer_nor_resource,
-};
-
-static struct map_desc tct_hammer_iodesc[] __initdata = {
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg tct_hammer_uartcfgs[] = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	}
-};
-
-static struct gpiod_lookup_table tct_hammer_mmc_gpio_table = {
-	.dev_id = "s3c2410-sdi",
-	.table = {
-		/* bus pins */
-		GPIO_LOOKUP_IDX("GPIOE",  5, "bus", 0, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  6, "bus", 1, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  7, "bus", 2, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  8, "bus", 3, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE",  9, "bus", 4, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct platform_device *tct_hammer_devices[] __initdata = {
-	&s3c_device_adc,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_ohci,
-	&s3c_device_rtc,
-	&s3c_device_usbgadget,
-	&s3c_device_sdi,
-	&tct_hammer_device_nor,
-};
-
-static void __init tct_hammer_map_io(void)
-{
-	s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc));
-	s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init tct_hammer_init_time(void)
-{
-	s3c2410_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-static void __init tct_hammer_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	gpiod_add_lookup_table(&tct_hammer_mmc_gpio_table);
-	platform_add_devices(tct_hammer_devices, ARRAY_SIZE(tct_hammer_devices));
-}
-
-MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2410,
-	.map_io		= tct_hammer_map_io,
-	.init_irq	= s3c2410_init_irq,
-	.init_machine	= tct_hammer_init,
-	.init_time	= tct_hammer_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-vr1000.c b/arch/arm/mach-s3c/mach-vr1000.c
deleted file mode 100644
index c85033e6ef8f..000000000000
--- a/arch/arm/mach-s3c/mach-vr1000.c
+++ /dev/null
@@ -1,364 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2003-2008 Simtec Electronics
-//   Ben Dooks <ben@simtec.co.uk>
-//
-// Machine support for Thorcom VR1000 board. Designed for Thorcom by
-// Simtec Electronics, http://www.simtec.co.uk/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/dm9000.h>
-#include <linux/i2c.h>
-
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_reg.h>
-#include <linux/serial_s3c.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <linux/platform_data/leds-s3c24xx.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/asoc-s3c24xx_simtec.h>
-
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-#include "gpio-cfg.h"
-
-#include "cpu.h"
-#include "devs.h"
-
-#include "bast.h"
-#include "s3c24xx.h"
-#include "simtec.h"
-#include "vr1000.h"
-
-/* macros for virtual address mods for the io space entries */
-#define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
-#define VA_C4(item) ((unsigned long)(item) + BAST_VAM_CS4)
-#define VA_C3(item) ((unsigned long)(item) + BAST_VAM_CS3)
-#define VA_C2(item) ((unsigned long)(item) + BAST_VAM_CS2)
-
-/* macros to modify the physical addresses for io space */
-
-#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2))
-#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3))
-#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4))
-#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5))
-
-static struct map_desc vr1000_iodesc[] __initdata = {
-  /* ISA IO areas */
-  {
-	  .virtual	= (u32)S3C24XX_VA_ISA_BYTE,
-	  .pfn		= PA_CS2(BAST_PA_ISAIO),
-	  .length	= SZ_16M,
-	  .type		= MT_DEVICE,
-  },
-
-  /*  CPLD control registers, and external interrupt controls */
-  {
-	  .virtual	= (u32)VR1000_VA_CTRL1,
-	  .pfn		= __phys_to_pfn(VR1000_PA_CTRL1),
-	  .length	= SZ_1M,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)VR1000_VA_CTRL2,
-	  .pfn		= __phys_to_pfn(VR1000_PA_CTRL2),
-	  .length	= SZ_1M,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)VR1000_VA_CTRL3,
-	  .pfn		= __phys_to_pfn(VR1000_PA_CTRL3),
-	  .length	= SZ_1M,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)VR1000_VA_CTRL4,
-	  .pfn		= __phys_to_pfn(VR1000_PA_CTRL4),
-	  .length	= SZ_1M,
-	  .type		= MT_DEVICE,
-  },
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	/* port 2 is not actually used */
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	}
-};
-
-/* definitions for the vr1000 extra 16550 serial ports */
-
-#define VR1000_BAUDBASE (3692307)
-
-#define VR1000_SERIAL_MAPBASE(x) (VR1000_PA_SERIAL + 0x80 + ((x) << 5))
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	[0] = {
-		.mapbase	= VR1000_SERIAL_MAPBASE(0),
-		.irq		= VR1000_IRQ_SERIAL + 0,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= VR1000_BAUDBASE,
-	},
-	[1] = {
-		.mapbase	= VR1000_SERIAL_MAPBASE(1),
-		.irq		= VR1000_IRQ_SERIAL + 1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= VR1000_BAUDBASE,
-	},
-	[2] = {
-		.mapbase	= VR1000_SERIAL_MAPBASE(2),
-		.irq		= VR1000_IRQ_SERIAL + 2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= VR1000_BAUDBASE,
-	},
-	[3] = {
-		.mapbase	= VR1000_SERIAL_MAPBASE(3),
-		.irq		= VR1000_IRQ_SERIAL + 3,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= VR1000_BAUDBASE,
-	},
-	{ },
-};
-
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
-	},
-};
-
-/* DM9000 ethernet devices */
-
-static struct resource vr1000_dm9k0_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000, 4),
-	[1] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0x40, 0x40),
-	[2] = DEFINE_RES_NAMED(VR1000_IRQ_DM9000A, 1, NULL, IORESOURCE_IRQ \
-						| IORESOURCE_IRQ_HIGHLEVEL),
-};
-
-static struct resource vr1000_dm9k1_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0x80, 4),
-	[1] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0xC0, 0x40),
-	[2] = DEFINE_RES_NAMED(VR1000_IRQ_DM9000N, 1, NULL, IORESOURCE_IRQ \
-						| IORESOURCE_IRQ_HIGHLEVEL),
-};
-
-/* for the moment we limit ourselves to 16bit IO until some
- * better IO routines can be written and tested
-*/
-
-static struct dm9000_plat_data vr1000_dm9k_platdata = {
-	.flags		= DM9000_PLATF_16BITONLY,
-};
-
-static struct platform_device vr1000_dm9k0 = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(vr1000_dm9k0_resource),
-	.resource	= vr1000_dm9k0_resource,
-	.dev		= {
-		.platform_data = &vr1000_dm9k_platdata,
-	}
-};
-
-static struct platform_device vr1000_dm9k1 = {
-	.name		= "dm9000",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(vr1000_dm9k1_resource),
-	.resource	= vr1000_dm9k1_resource,
-	.dev		= {
-		.platform_data = &vr1000_dm9k_platdata,
-	}
-};
-
-/* LEDS */
-
-static struct gpiod_lookup_table vr1000_led1_gpio_table = {
-	.dev_id = "s3c24xx_led.1",
-	.table = {
-		GPIO_LOOKUP("GPB", 0, NULL, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table vr1000_led2_gpio_table = {
-	.dev_id = "s3c24xx_led.2",
-	.table = {
-		GPIO_LOOKUP("GPB", 1, NULL, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table vr1000_led3_gpio_table = {
-	.dev_id = "s3c24xx_led.3",
-	.table = {
-		GPIO_LOOKUP("GPB", 2, NULL, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct s3c24xx_led_platdata vr1000_led1_pdata = {
-	.name		= "led1",
-	.def_trigger	= "",
-};
-
-static struct s3c24xx_led_platdata vr1000_led2_pdata = {
-	.name		= "led2",
-	.def_trigger	= "",
-};
-
-static struct s3c24xx_led_platdata vr1000_led3_pdata = {
-	.name		= "led3",
-	.def_trigger	= "",
-};
-
-static struct platform_device vr1000_led1 = {
-	.name		= "s3c24xx_led",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &vr1000_led1_pdata,
-	},
-};
-
-static struct platform_device vr1000_led2 = {
-	.name		= "s3c24xx_led",
-	.id		= 2,
-	.dev		= {
-		.platform_data	= &vr1000_led2_pdata,
-	},
-};
-
-static struct platform_device vr1000_led3 = {
-	.name		= "s3c24xx_led",
-	.id		= 3,
-	.dev		= {
-		.platform_data	= &vr1000_led3_pdata,
-	},
-};
-
-/* I2C devices. */
-
-static struct i2c_board_info vr1000_i2c_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("tlv320aic23", 0x1a),
-	}, {
-		I2C_BOARD_INFO("tmp101", 0x48),
-	}, {
-		I2C_BOARD_INFO("m41st87", 0x68),
-	},
-};
-
-/* devices for this board */
-
-static struct platform_device *vr1000_devices[] __initdata = {
-	&s3c2410_device_dclk,
-	&s3c_device_ohci,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_adc,
-	&serial_device,
-	&vr1000_dm9k0,
-	&vr1000_dm9k1,
-	&vr1000_led1,
-	&vr1000_led2,
-	&vr1000_led3,
-};
-
-static void vr1000_power_off(void)
-{
-	gpio_direction_output(S3C2410_GPB(9), 1);
-}
-
-static void __init vr1000_map_io(void)
-{
-	pm_power_off = vr1000_power_off;
-
-	s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
-	s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init vr1000_init_time(void)
-{
-	s3c2410_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-static void __init vr1000_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-
-	/* Disable pull-up on LED lines and register GPIO lookups */
-	s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
-	s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_NONE);
-	s3c_gpio_setpull(S3C2410_GPB(2), S3C_GPIO_PULL_NONE);
-	gpiod_add_lookup_table(&vr1000_led1_gpio_table);
-	gpiod_add_lookup_table(&vr1000_led2_gpio_table);
-	gpiod_add_lookup_table(&vr1000_led3_gpio_table);
-
-	platform_add_devices(vr1000_devices, ARRAY_SIZE(vr1000_devices));
-
-	i2c_register_board_info(0, vr1000_i2c_devs,
-				ARRAY_SIZE(vr1000_i2c_devs));
-
-	nor_simtec_init();
-	simtec_audio_add(NULL, true, NULL);
-
-	WARN_ON(gpio_request(S3C2410_GPB(9), "power off"));
-}
-
-MACHINE_START(VR1000, "Thorcom-VR1000")
-	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2410,
-	.map_io		= vr1000_map_io,
-	.init_machine	= vr1000_init,
-	.init_irq	= s3c2410_init_irq,
-	.init_time	= vr1000_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/mach-vstms.c b/arch/arm/mach-s3c/mach-vstms.c
deleted file mode 100644
index 6f878418be3e..000000000000
--- a/arch/arm/mach-s3c/mach-vstms.c
+++ /dev/null
@@ -1,166 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// (C) 2006 Thomas Gleixner <tglx@linutronix.de>
-//
-// Derived from mach-smdk2413.c - (C) 2006 Simtec Electronics
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand-ecc-sw-hamming.h>
-#include <linux/mtd/partitions.h>
-#include <linux/memblock.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/setup.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-#include "gpio-cfg.h"
-
-#include <linux/platform_data/fb-s3c2410.h>
-
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-
-#include "devs.h"
-#include "cpu.h"
-
-#include "s3c24xx.h"
-
-static struct map_desc vstms_iodesc[] __initdata = {
-};
-
-static struct s3c2410_uartcfg vstms_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	}
-};
-
-static struct mtd_partition __initdata vstms_nand_part[] = {
-	[0] = {
-		.name	= "Boot Agent",
-		.size	= 0x7C000,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "UBoot Config",
-		.offset = 0x7C000,
-		.size	= 0x4000,
-	},
-	[2] = {
-		.name	= "Kernel",
-		.offset = 0x80000,
-		.size	= 0x200000,
-	},
-	[3] = {
-		.name	= "RFS",
-		.offset	= 0x280000,
-		.size	= 0x3d80000,
-	},
-};
-
-static struct s3c2410_nand_set __initdata vstms_nand_sets[] = {
-	[0] = {
-		.name		= "NAND",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(vstms_nand_part),
-		.partitions	= vstms_nand_part,
-	},
-};
-
-/* choose a set of timings which should suit most 512Mbit
- * chips and beyond.
-*/
-
-static struct s3c2410_platform_nand __initdata vstms_nand_info = {
-	.tacls		= 20,
-	.twrph0		= 60,
-	.twrph1		= 20,
-	.nr_sets	= ARRAY_SIZE(vstms_nand_sets),
-	.sets		= vstms_nand_sets,
-	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
-};
-
-static struct platform_device *vstms_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-	&s3c_device_rtc,
-	&s3c_device_nand,
-	&s3c2412_device_dma,
-};
-
-static void __init vstms_fixup(struct tag *tags, char **cmdline)
-{
-	if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) {
-		memblock_add(0x30000000, SZ_64M);
-	}
-}
-
-static void __init vstms_map_io(void)
-{
-	s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
-	s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
-	s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
-}
-
-static void __init vstms_init_time(void)
-{
-	s3c2412_init_clocks(12000000);
-	s3c24xx_timer_init();
-}
-
-static void __init vstms_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	s3c_nand_set_platdata(&vstms_nand_info);
-	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
-	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
-			      S3C_GPIO_PULL_NONE);
-	platform_add_devices(vstms_devices, ARRAY_SIZE(vstms_devices));
-}
-
-MACHINE_START(VSTMS, "VSTMS")
-	.atag_offset	= 0x100,
-	.nr_irqs	= NR_IRQS_S3C2412,
-
-	.fixup		= vstms_fixup,
-	.init_irq	= s3c2412_init_irq,
-	.init_machine	= vstms_init,
-	.map_io		= vstms_map_io,
-	.init_time	= vstms_init_time,
-MACHINE_END
diff --git a/arch/arm/mach-s3c/map-s3c.h b/arch/arm/mach-s3c/map-s3c.h
index a18fdd3d6ae2..b5f5bdba384f 100644
--- a/arch/arm/mach-s3c/map-s3c.h
+++ b/arch/arm/mach-s3c/map-s3c.h
@@ -11,20 +11,6 @@
 
 #include "map.h"
 
-#define S3C24XX_VA_IRQ		S3C_VA_IRQ
-#define S3C24XX_VA_MEMCTRL	S3C_VA_MEM
-#define S3C24XX_VA_UART		S3C_VA_UART
-
-#define S3C24XX_VA_TIMER	S3C_VA_TIMER
-#define S3C24XX_VA_CLKPWR	S3C_VA_SYS
-#define S3C24XX_VA_WATCHDOG	S3C_VA_WATCHDOG
-
-#define S3C2412_VA_SSMC		S3C_ADDR_CPU(0x00000000)
-#define S3C2412_VA_EBI		S3C_ADDR_CPU(0x00100000)
-
-#define S3C2410_PA_UART		(0x50000000)
-#define S3C24XX_PA_UART		S3C2410_PA_UART
-
 /*
  * GPIO ports
  *
@@ -35,11 +21,6 @@
  * 0xFA800000, which is not in the way of any current mapping
  * by the base system.
 */
-
-#define S3C2410_PA_GPIO		(0x56000000)
-#define S3C24XX_PA_GPIO		S3C2410_PA_GPIO
-
-#define S3C24XX_VA_GPIO		((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
 #define S3C64XX_VA_GPIO		S3C_ADDR_CPU(0x00000000)
 
 #define S3C64XX_VA_MODEM	S3C_ADDR_CPU(0x00100000)
@@ -47,24 +28,6 @@
 
 #define S3C_VA_USB_HSPHY	S3C64XX_VA_USB_HSPHY
 
-#define S3C2410_ADDR(x)		S3C_ADDR(x)
-
-/* deal with the registers that move under the 2412/2413 */
-
-#if defined(CONFIG_CPU_S3C2412)
-#ifndef __ASSEMBLY__
-extern void __iomem *s3c24xx_va_gpio2;
-#endif
-#ifdef CONFIG_CPU_S3C2412_ONLY
-#define S3C24XX_VA_GPIO2	(S3C24XX_VA_GPIO + 0x10)
-#else
-#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
-#endif
-#else
-#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
-#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
-#endif
-
 #include "map-s5p.h"
 
 #endif /* __ASM_PLAT_MAP_S3C_H */
diff --git a/arch/arm/mach-s3c/map-s3c24xx.h b/arch/arm/mach-s3c/map-s3c24xx.h
deleted file mode 100644
index f8d075b11d6f..000000000000
--- a/arch/arm/mach-s3c/map-s3c24xx.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2003 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - Memory map definitions
- */
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H
-
-#include "map-base.h"
-#include "map-s3c.h"
-
-/*
- * interrupt controller is the first thing we put in, to make
- * the assembly code for the irq detection easier
- */
-#define S3C2410_PA_IRQ		(0x4A000000)
-#define S3C24XX_SZ_IRQ		SZ_1M
-
-/* memory controller registers */
-#define S3C2410_PA_MEMCTRL	(0x48000000)
-#define S3C24XX_SZ_MEMCTRL	SZ_1M
-
-/* Timers */
-#define S3C2410_PA_TIMER	(0x51000000)
-#define S3C24XX_SZ_TIMER	SZ_1M
-
-/* Clock and Power management */
-#define S3C24XX_SZ_CLKPWR	SZ_1M
-
-/* USB Device port */
-#define S3C2410_PA_USBDEV	(0x52000000)
-#define S3C24XX_SZ_USBDEV	SZ_1M
-
-/* Watchdog */
-#define S3C2410_PA_WATCHDOG	(0x53000000)
-#define S3C24XX_SZ_WATCHDOG	SZ_1M
-
-/* Standard size definitions for peripheral blocks. */
-
-#define S3C24XX_SZ_UART		SZ_1M
-#define S3C24XX_SZ_IIS		SZ_1M
-#define S3C24XX_SZ_ADC		SZ_1M
-#define S3C24XX_SZ_SPI		SZ_1M
-#define S3C24XX_SZ_SDI		SZ_1M
-#define S3C24XX_SZ_NAND		SZ_1M
-#define S3C24XX_SZ_GPIO		SZ_1M
-
-/* USB host controller */
-#define S3C2410_PA_USBHOST (0x49000000)
-
-/* S3C2416/S3C2443/S3C2450 High-Speed USB Gadget */
-#define S3C2416_PA_HSUDC	(0x49800000)
-#define S3C2416_SZ_HSUDC	(SZ_4K)
-
-/* DMA controller */
-#define S3C2410_PA_DMA	   (0x4B000000)
-#define S3C24XX_SZ_DMA	   SZ_1M
-
-/* Clock and Power management */
-#define S3C2410_PA_CLKPWR  (0x4C000000)
-
-/* LCD controller */
-#define S3C2410_PA_LCD	   (0x4D000000)
-#define S3C24XX_SZ_LCD	   SZ_1M
-
-/* NAND flash controller */
-#define S3C2410_PA_NAND	   (0x4E000000)
-
-/* IIC hardware controller */
-#define S3C2410_PA_IIC	   (0x54000000)
-
-/* IIS controller */
-#define S3C2410_PA_IIS	   (0x55000000)
-
-/* RTC */
-#define S3C2410_PA_RTC	   (0x57000000)
-#define S3C24XX_SZ_RTC	   SZ_1M
-
-/* ADC */
-#define S3C2410_PA_ADC	   (0x58000000)
-
-/* SPI */
-#define S3C2410_PA_SPI	   (0x59000000)
-#define S3C2443_PA_SPI0		(0x52000000)
-#define S3C2443_PA_SPI1		S3C2410_PA_SPI
-#define S3C2410_SPI1		(0x20)
-#define S3C2412_SPI1		(0x100)
-
-/* SDI */
-#define S3C2410_PA_SDI	   (0x5A000000)
-
-/* CAMIF */
-#define S3C2440_PA_CAMIF   (0x4F000000)
-#define S3C2440_SZ_CAMIF   SZ_1M
-
-/* AC97 */
-
-#define S3C2440_PA_AC97	   (0x5B000000)
-#define S3C2440_SZ_AC97	   SZ_1M
-
-/* S3C2443/S3C2416 High-speed SD/MMC */
-#define S3C2443_PA_HSMMC   (0x4A800000)
-#define S3C2416_PA_HSMMC0  (0x4AC00000)
-
-#define	S3C2443_PA_FB	(0x4C800000)
-
-/* S3C2412 memory and IO controls */
-#define S3C2412_PA_SSMC	(0x4F000000)
-
-#define S3C2412_PA_EBI	(0x48800000)
-
-/* physical addresses of all the chip-select areas */
-
-#define S3C2410_CS0 (0x00000000)
-#define S3C2410_CS1 (0x08000000)
-#define S3C2410_CS2 (0x10000000)
-#define S3C2410_CS3 (0x18000000)
-#define S3C2410_CS4 (0x20000000)
-#define S3C2410_CS5 (0x28000000)
-#define S3C2410_CS6 (0x30000000)
-#define S3C2410_CS7 (0x38000000)
-
-#define S3C2410_SDRAM_PA    (S3C2410_CS6)
-
-/* Use a single interface for common resources between S3C24XX cpus */
-
-#define S3C24XX_PA_IRQ      S3C2410_PA_IRQ
-#define S3C24XX_PA_MEMCTRL  S3C2410_PA_MEMCTRL
-#define S3C24XX_PA_DMA      S3C2410_PA_DMA
-#define S3C24XX_PA_CLKPWR   S3C2410_PA_CLKPWR
-#define S3C24XX_PA_LCD      S3C2410_PA_LCD
-#define S3C24XX_PA_TIMER    S3C2410_PA_TIMER
-#define S3C24XX_PA_USBDEV   S3C2410_PA_USBDEV
-#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
-#define S3C24XX_PA_IIS      S3C2410_PA_IIS
-#define S3C24XX_PA_RTC      S3C2410_PA_RTC
-#define S3C24XX_PA_ADC      S3C2410_PA_ADC
-#define S3C24XX_PA_SPI      S3C2410_PA_SPI
-#define S3C24XX_PA_SPI1		(S3C2410_PA_SPI + S3C2410_SPI1)
-#define S3C24XX_PA_SDI      S3C2410_PA_SDI
-#define S3C24XX_PA_NAND	    S3C2410_PA_NAND
-
-#define S3C_PA_FB	    S3C2443_PA_FB
-#define S3C_PA_IIC          S3C2410_PA_IIC
-#define S3C_PA_USBHOST	S3C2410_PA_USBHOST
-#define S3C_PA_HSMMC0	    S3C2416_PA_HSMMC0
-#define S3C_PA_HSMMC1	    S3C2443_PA_HSMMC
-#define S3C_PA_WDT	    S3C2410_PA_WATCHDOG
-#define S3C_PA_NAND	    S3C24XX_PA_NAND
-
-#define S3C_PA_SPI0		S3C2443_PA_SPI0
-#define S3C_PA_SPI1		S3C2443_PA_SPI1
-
-#define SAMSUNG_PA_TIMER	S3C2410_PA_TIMER
-
-#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c/map.h b/arch/arm/mach-s3c/map.h
index 7cfb517d4886..778d6f81cb2b 100644
--- a/arch/arm/mach-s3c/map.h
+++ b/arch/arm/mach-s3c/map.h
@@ -1,9 +1,2 @@
 /* SPDX-License-Identifier: GPL-2.0 */
-
-#ifdef CONFIG_ARCH_S3C24XX
-#include "map-s3c24xx.h"
-#endif
-
-#ifdef CONFIG_ARCH_S3C64XX
 #include "map-s3c64xx.h"
-#endif
diff --git a/arch/arm/mach-s3c/nand-core-s3c24xx.h b/arch/arm/mach-s3c/nand-core-s3c24xx.h
deleted file mode 100644
index a14316729c48..000000000000
--- a/arch/arm/mach-s3c/nand-core-s3c24xx.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S3C -  Nand Controller core functions
- */
-
-#ifndef __ASM_ARCH_NAND_CORE_S3C24XX_H
-#define __ASM_ARCH_NAND_CORE_S3C24XX_H __FILE__
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
- */
-
-/* re-define device name depending on support. */
-static inline void s3c_nand_setname(char *name)
-{
-#ifdef CONFIG_S3C_DEV_NAND
-	s3c_device_nand.name = name;
-#endif
-}
-
-#endif /* __ASM_ARCH_NAND_CORE_S3C24XX_H */
diff --git a/arch/arm/mach-s3c/onenand-core-s3c64xx.h b/arch/arm/mach-s3c/onenand-core-s3c64xx.h
deleted file mode 100644
index e2dfdd1fec93..000000000000
--- a/arch/arm/mach-s3c/onenand-core-s3c64xx.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- *  Copyright (c) 2010 Samsung Electronics
- *  Kyungmin Park <kyungmin.park@samsung.com>
- *  Marek Szyprowski <m.szyprowski@samsung.com>
- *
- * Samsung OneNAD Controller core functions
- */
-
-#ifndef __ASM_ARCH_ONENAND_CORE_S3C64XX_H
-#define __ASM_ARCH_ONENAND_CORE_S3C64XX_H __FILE__
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
- */
-
-/* re-define device name depending on support. */
-static inline void s3c_onenand_setname(char *name)
-{
-#ifdef CONFIG_S3C_DEV_ONENAND
-	s3c_device_onenand.name = name;
-#endif
-}
-
-static inline void s3c64xx_onenand1_setname(char *name)
-{
-#ifdef CONFIG_S3C64XX_DEV_ONENAND1
-	s3c64xx_device_onenand1.name = name;
-#endif
-}
-
-#endif /* __ASM_ARCH_ONENAND_CORE_S3C64XX_H */
diff --git a/arch/arm/mach-s3c/osiris.h b/arch/arm/mach-s3c/osiris.h
deleted file mode 100644
index b6c9c5ed2ba7..000000000000
--- a/arch/arm/mach-s3c/osiris.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * OSIRIS - CPLD control constants
- * OSIRIS - Memory map definitions
- */
-
-#ifndef __MACH_S3C24XX_OSIRIS_H
-#define __MACH_S3C24XX_OSIRIS_H __FILE__
-
-/* CTRL0 - NAND WP control */
-
-#define OSIRIS_CTRL0_NANDSEL		(0x3)
-#define OSIRIS_CTRL0_BOOT_INT		(1<<3)
-#define OSIRIS_CTRL0_PCMCIA		(1<<4)
-#define OSIRIS_CTRL0_FIX8		(1<<5)
-#define OSIRIS_CTRL0_PCMCIA_nWAIT	(1<<6)
-#define OSIRIS_CTRL0_PCMCIA_nIOIS16	(1<<7)
-
-#define OSIRIS_CTRL1_FIX8		(1<<0)
-
-#define OSIRIS_ID_REVMASK		(0x7)
-
-/* start peripherals off after the S3C2410 */
-
-#define OSIRIS_IOADDR(x)	(S3C2410_ADDR((x) + 0x04000000))
-
-#define OSIRIS_PA_CPLD		(S3C2410_CS1 | (1<<26))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define OSIRIS_VA_CTRL0		OSIRIS_IOADDR(0x00000000)
-#define OSIRIS_PA_CTRL0		(OSIRIS_PA_CPLD)
-
-#define OSIRIS_VA_CTRL1		OSIRIS_IOADDR(0x00100000)
-#define OSIRIS_PA_CTRL1		(OSIRIS_PA_CPLD + (1<<23))
-
-#define OSIRIS_VA_CTRL2		OSIRIS_IOADDR(0x00200000)
-#define OSIRIS_PA_CTRL2		(OSIRIS_PA_CPLD + (2<<23))
-
-#define OSIRIS_VA_CTRL3		OSIRIS_IOADDR(0x00300000)
-#define OSIRIS_PA_CTRL3		(OSIRIS_PA_CPLD + (2<<23))
-
-#define OSIRIS_VA_IDREG		OSIRIS_IOADDR(0x00700000)
-#define OSIRIS_PA_IDREG		(OSIRIS_PA_CPLD + (7<<23))
-
-#endif /* __MACH_S3C24XX_OSIRIS_H */
diff --git a/arch/arm/mach-s3c/otom.h b/arch/arm/mach-s3c/otom.h
deleted file mode 100644
index c800f67d03d4..000000000000
--- a/arch/arm/mach-s3c/otom.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * (c) 2005 Guillaume GOURAT / NexVision
- *          guillaume.gourat@nexvision.fr
- *
- * NexVision OTOM board memory map definitions
- */
-
-/*
- * ok, we've used up to 0x01300000, now we need to find space for the
- * peripherals that live in the nGCS[x] areas, which are quite numerous
- * in their space.
- */
-
-#ifndef __MACH_S3C24XX_OTOM_H
-#define __MACH_S3C24XX_OTOM_H __FILE__
-
-#define OTOM_PA_CS8900A_BASE	(S3C2410_CS3 + 0x01000000)	/* nGCS3 +0x01000000 */
-#define OTOM_VA_CS8900A_BASE	S3C2410_ADDR(0x04000000)	/* 0xF4000000 */
-
-/* physical offset addresses for the peripherals */
-
-#define OTOM_PA_FLASH0_BASE	(S3C2410_CS0)
-
-#endif /* __MACH_S3C24XX_OTOM_H */
diff --git a/arch/arm/mach-s3c/pll-s3c2410.c b/arch/arm/mach-s3c/pll-s3c2410.c
deleted file mode 100644
index 3fbc99eaa4a2..000000000000
--- a/arch/arm/mach-s3c/pll-s3c2410.c
+++ /dev/null
@@ -1,83 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (c) 2006-2007 Simtec Electronics
-//	http://armlinux.simtec.co.uk/
-//	Ben Dooks <ben@simtec.co.uk>
-//	Vincent Sanders <vince@arm.linux.org.uk>
-//
-// S3C2410 CPU PLL tables
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <linux/soc/samsung/s3c-cpufreq-core.h>
-#include <linux/soc/samsung/s3c-pm.h>
-
-/* This array should be sorted in ascending order of the frequencies */
-static struct cpufreq_frequency_table pll_vals_12MHz[] = {
-    { .frequency = 34000000,  .driver_data = PLLVAL(82, 2, 3),   },
-    { .frequency = 45000000,  .driver_data = PLLVAL(82, 1, 3),   },
-    { .frequency = 48000000,  .driver_data = PLLVAL(120, 2, 3),  },
-    { .frequency = 51000000,  .driver_data = PLLVAL(161, 3, 3),  },
-    { .frequency = 56000000,  .driver_data = PLLVAL(142, 2, 3),  },
-    { .frequency = 68000000,  .driver_data = PLLVAL(82, 2, 2),   },
-    { .frequency = 79000000,  .driver_data = PLLVAL(71, 1, 2),   },
-    { .frequency = 85000000,  .driver_data = PLLVAL(105, 2, 2),  },
-    { .frequency = 90000000,  .driver_data = PLLVAL(112, 2, 2),  },
-    { .frequency = 101000000, .driver_data = PLLVAL(127, 2, 2),  },
-    { .frequency = 113000000, .driver_data = PLLVAL(105, 1, 2),  },
-    { .frequency = 118000000, .driver_data = PLLVAL(150, 2, 2),  },
-    { .frequency = 124000000, .driver_data = PLLVAL(116, 1, 2),  },
-    { .frequency = 135000000, .driver_data = PLLVAL(82, 2, 1),   },
-    { .frequency = 147000000, .driver_data = PLLVAL(90, 2, 1),   },
-    { .frequency = 152000000, .driver_data = PLLVAL(68, 1, 1),   },
-    { .frequency = 158000000, .driver_data = PLLVAL(71, 1, 1),   },
-    { .frequency = 170000000, .driver_data = PLLVAL(77, 1, 1),   },
-    { .frequency = 180000000, .driver_data = PLLVAL(82, 1, 1),   },
-    { .frequency = 186000000, .driver_data = PLLVAL(85, 1, 1),   },
-    { .frequency = 192000000, .driver_data = PLLVAL(88, 1, 1),   },
-    { .frequency = 203000000, .driver_data = PLLVAL(161, 3, 1),  },
-
-    /* 2410A extras */
-
-    { .frequency = 210000000, .driver_data = PLLVAL(132, 2, 1),  },
-    { .frequency = 226000000, .driver_data = PLLVAL(105, 1, 1),  },
-    { .frequency = 266000000, .driver_data = PLLVAL(125, 1, 1),  },
-    { .frequency = 268000000, .driver_data = PLLVAL(126, 1, 1),  },
-    { .frequency = 270000000, .driver_data = PLLVAL(127, 1, 1),  },
-};
-
-static int s3c2410_plls_add(struct device *dev, struct subsys_interface *sif)
-{
-	return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz));
-}
-
-static struct subsys_interface s3c2410_plls_interface = {
-	.name		= "s3c2410_plls",
-	.subsys		= &s3c2410_subsys,
-	.add_dev	= s3c2410_plls_add,
-};
-
-static int __init s3c2410_pll_init(void)
-{
-	return subsys_interface_register(&s3c2410_plls_interface);
-
-}
-arch_initcall(s3c2410_pll_init);
-
-static struct subsys_interface s3c2410a_plls_interface = {
-	.name		= "s3c2410a_plls",
-	.subsys		= &s3c2410a_subsys,
-	.add_dev	= s3c2410_plls_add,
-};
-
-static int __init s3c2410a_pll_init(void)
-{
-	return subsys_interface_register(&s3c2410a_plls_interface);
-}
-arch_initcall(s3c2410a_pll_init);
diff --git a/arch/arm/mach-s3c/pll-s3c2440-12000000.c b/arch/arm/mach-s3c/pll-s3c2440-12000000.c
deleted file mode 100644
index fdb8e8c2fe3b..000000000000
--- a/arch/arm/mach-s3c/pll-s3c2440-12000000.c
+++ /dev/null
@@ -1,95 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2006-2007 Simtec Electronics
-//	http://armlinux.simtec.co.uk/
-//	Ben Dooks <ben@simtec.co.uk>
-//	Vincent Sanders <vince@arm.linux.org.uk>
-//
-// S3C2440/S3C2442 CPU PLL tables (12MHz Crystal)
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <linux/soc/samsung/s3c-cpufreq-core.h>
-#include <linux/soc/samsung/s3c-pm.h>
-
-/* This array should be sorted in ascending order of the frequencies */
-static struct cpufreq_frequency_table s3c2440_plls_12[] = {
-	{ .frequency = 75000000,	.driver_data = PLLVAL(0x75, 3, 3),  }, 	/* FVco 600.000000 */
-	{ .frequency = 80000000,	.driver_data = PLLVAL(0x98, 4, 3),  }, 	/* FVco 640.000000 */
-	{ .frequency = 90000000,	.driver_data = PLLVAL(0x70, 2, 3),  }, 	/* FVco 720.000000 */
-	{ .frequency = 100000000,	.driver_data = PLLVAL(0x5c, 1, 3),  }, 	/* FVco 800.000000 */
-	{ .frequency = 110000000,	.driver_data = PLLVAL(0x66, 1, 3),  }, 	/* FVco 880.000000 */
-	{ .frequency = 120000000,	.driver_data = PLLVAL(0x70, 1, 3),  }, 	/* FVco 960.000000 */
-	{ .frequency = 150000000,	.driver_data = PLLVAL(0x75, 3, 2),  }, 	/* FVco 600.000000 */
-	{ .frequency = 160000000,	.driver_data = PLLVAL(0x98, 4, 2),  }, 	/* FVco 640.000000 */
-	{ .frequency = 170000000,	.driver_data = PLLVAL(0x4d, 1, 2),  }, 	/* FVco 680.000000 */
-	{ .frequency = 180000000,	.driver_data = PLLVAL(0x70, 2, 2),  }, 	/* FVco 720.000000 */
-	{ .frequency = 190000000,	.driver_data = PLLVAL(0x57, 1, 2),  }, 	/* FVco 760.000000 */
-	{ .frequency = 200000000,	.driver_data = PLLVAL(0x5c, 1, 2),  }, 	/* FVco 800.000000 */
-	{ .frequency = 210000000,	.driver_data = PLLVAL(0x84, 2, 2),  }, 	/* FVco 840.000000 */
-	{ .frequency = 220000000,	.driver_data = PLLVAL(0x66, 1, 2),  }, 	/* FVco 880.000000 */
-	{ .frequency = 230000000,	.driver_data = PLLVAL(0x6b, 1, 2),  }, 	/* FVco 920.000000 */
-	{ .frequency = 240000000,	.driver_data = PLLVAL(0x70, 1, 2),  }, 	/* FVco 960.000000 */
-	{ .frequency = 300000000,	.driver_data = PLLVAL(0x75, 3, 1),  }, 	/* FVco 600.000000 */
-	{ .frequency = 310000000,	.driver_data = PLLVAL(0x93, 4, 1),  }, 	/* FVco 620.000000 */
-	{ .frequency = 320000000,	.driver_data = PLLVAL(0x98, 4, 1),  }, 	/* FVco 640.000000 */
-	{ .frequency = 330000000,	.driver_data = PLLVAL(0x66, 2, 1),  }, 	/* FVco 660.000000 */
-	{ .frequency = 340000000,	.driver_data = PLLVAL(0x4d, 1, 1),  }, 	/* FVco 680.000000 */
-	{ .frequency = 350000000,	.driver_data = PLLVAL(0xa7, 4, 1),  }, 	/* FVco 700.000000 */
-	{ .frequency = 360000000,	.driver_data = PLLVAL(0x70, 2, 1),  }, 	/* FVco 720.000000 */
-	{ .frequency = 370000000,	.driver_data = PLLVAL(0xb1, 4, 1),  }, 	/* FVco 740.000000 */
-	{ .frequency = 380000000,	.driver_data = PLLVAL(0x57, 1, 1),  }, 	/* FVco 760.000000 */
-	{ .frequency = 390000000,	.driver_data = PLLVAL(0x7a, 2, 1),  }, 	/* FVco 780.000000 */
-	{ .frequency = 400000000,	.driver_data = PLLVAL(0x5c, 1, 1),  }, 	/* FVco 800.000000 */
-};
-
-static int s3c2440_plls12_add(struct device *dev, struct subsys_interface *sif)
-{
-	struct clk *xtal_clk;
-	unsigned long xtal;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	if (IS_ERR(xtal_clk))
-		return PTR_ERR(xtal_clk);
-
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	if (xtal == 12000000) {
-		printk(KERN_INFO "Using PLL table for 12MHz crystal\n");
-		return s3c_plltab_register(s3c2440_plls_12,
-					   ARRAY_SIZE(s3c2440_plls_12));
-	}
-
-	return 0;
-}
-
-static struct subsys_interface s3c2440_plls12_interface = {
-	.name		= "s3c2440_plls12",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c2440_plls12_add,
-};
-
-static int __init s3c2440_pll_12mhz(void)
-{
-	return subsys_interface_register(&s3c2440_plls12_interface);
-
-}
-arch_initcall(s3c2440_pll_12mhz);
-
-static struct subsys_interface s3c2442_plls12_interface = {
-	.name		= "s3c2442_plls12",
-	.subsys		= &s3c2442_subsys,
-	.add_dev	= s3c2440_plls12_add,
-};
-
-static int __init s3c2442_pll_12mhz(void)
-{
-	return subsys_interface_register(&s3c2442_plls12_interface);
-
-}
-arch_initcall(s3c2442_pll_12mhz);
diff --git a/arch/arm/mach-s3c/pll-s3c2440-16934400.c b/arch/arm/mach-s3c/pll-s3c2440-16934400.c
deleted file mode 100644
index 438b6fc099a4..000000000000
--- a/arch/arm/mach-s3c/pll-s3c2440-16934400.c
+++ /dev/null
@@ -1,122 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2006-2008 Simtec Electronics
-//	http://armlinux.simtec.co.uk/
-//	Ben Dooks <ben@simtec.co.uk>
-//	Vincent Sanders <vince@arm.linux.org.uk>
-//
-// S3C2440/S3C2442 CPU PLL tables (16.93444MHz Crystal)
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <linux/soc/samsung/s3c-cpufreq-core.h>
-#include <linux/soc/samsung/s3c-pm.h>
-
-/* This array should be sorted in ascending order of the frequencies */
-static struct cpufreq_frequency_table s3c2440_plls_169344[] = {
-	{ .frequency = 78019200,	.driver_data = PLLVAL(121, 5, 3), 	}, 	/* FVco 624.153600 */
-	{ .frequency = 84067200,	.driver_data = PLLVAL(131, 5, 3), 	}, 	/* FVco 672.537600 */
-	{ .frequency = 90115200,	.driver_data = PLLVAL(141, 5, 3), 	}, 	/* FVco 720.921600 */
-	{ .frequency = 96163200,	.driver_data = PLLVAL(151, 5, 3), 	}, 	/* FVco 769.305600 */
-	{ .frequency = 102135600,	.driver_data = PLLVAL(185, 6, 3), 	}, 	/* FVco 817.084800 */
-	{ .frequency = 108259200,	.driver_data = PLLVAL(171, 5, 3), 	}, 	/* FVco 866.073600 */
-	{ .frequency = 114307200,	.driver_data = PLLVAL(127, 3, 3), 	}, 	/* FVco 914.457600 */
-	{ .frequency = 120234240,	.driver_data = PLLVAL(134, 3, 3), 	}, 	/* FVco 961.873920 */
-	{ .frequency = 126161280,	.driver_data = PLLVAL(141, 3, 3), 	}, 	/* FVco 1009.290240 */
-	{ .frequency = 132088320,	.driver_data = PLLVAL(148, 3, 3), 	}, 	/* FVco 1056.706560 */
-	{ .frequency = 138015360,	.driver_data = PLLVAL(155, 3, 3), 	}, 	/* FVco 1104.122880 */
-	{ .frequency = 144789120,	.driver_data = PLLVAL(163, 3, 3), 	}, 	/* FVco 1158.312960 */
-	{ .frequency = 150100363,	.driver_data = PLLVAL(187, 9, 2), 	}, 	/* FVco 600.401454 */
-	{ .frequency = 156038400,	.driver_data = PLLVAL(121, 5, 2), 	}, 	/* FVco 624.153600 */
-	{ .frequency = 162086400,	.driver_data = PLLVAL(126, 5, 2), 	}, 	/* FVco 648.345600 */
-	{ .frequency = 168134400,	.driver_data = PLLVAL(131, 5, 2), 	}, 	/* FVco 672.537600 */
-	{ .frequency = 174048000,	.driver_data = PLLVAL(177, 7, 2), 	}, 	/* FVco 696.192000 */
-	{ .frequency = 180230400,	.driver_data = PLLVAL(141, 5, 2), 	}, 	/* FVco 720.921600 */
-	{ .frequency = 186278400,	.driver_data = PLLVAL(124, 4, 2), 	}, 	/* FVco 745.113600 */
-	{ .frequency = 192326400,	.driver_data = PLLVAL(151, 5, 2), 	}, 	/* FVco 769.305600 */
-	{ .frequency = 198132480,	.driver_data = PLLVAL(109, 3, 2), 	}, 	/* FVco 792.529920 */
-	{ .frequency = 204271200,	.driver_data = PLLVAL(185, 6, 2), 	}, 	/* FVco 817.084800 */
-	{ .frequency = 210268800,	.driver_data = PLLVAL(141, 4, 2), 	}, 	/* FVco 841.075200 */
-	{ .frequency = 216518400,	.driver_data = PLLVAL(171, 5, 2), 	}, 	/* FVco 866.073600 */
-	{ .frequency = 222264000,	.driver_data = PLLVAL(97, 2, 2), 	}, 	/* FVco 889.056000 */
-	{ .frequency = 228614400,	.driver_data = PLLVAL(127, 3, 2), 	}, 	/* FVco 914.457600 */
-	{ .frequency = 234259200,	.driver_data = PLLVAL(158, 4, 2), 	}, 	/* FVco 937.036800 */
-	{ .frequency = 240468480,	.driver_data = PLLVAL(134, 3, 2), 	}, 	/* FVco 961.873920 */
-	{ .frequency = 246960000,	.driver_data = PLLVAL(167, 4, 2), 	}, 	/* FVco 987.840000 */
-	{ .frequency = 252322560,	.driver_data = PLLVAL(141, 3, 2), 	}, 	/* FVco 1009.290240 */
-	{ .frequency = 258249600,	.driver_data = PLLVAL(114, 2, 2), 	}, 	/* FVco 1032.998400 */
-	{ .frequency = 264176640,	.driver_data = PLLVAL(148, 3, 2), 	}, 	/* FVco 1056.706560 */
-	{ .frequency = 270950400,	.driver_data = PLLVAL(120, 2, 2), 	}, 	/* FVco 1083.801600 */
-	{ .frequency = 276030720,	.driver_data = PLLVAL(155, 3, 2), 	}, 	/* FVco 1104.122880 */
-	{ .frequency = 282240000,	.driver_data = PLLVAL(92, 1, 2), 	}, 	/* FVco 1128.960000 */
-	{ .frequency = 289578240,	.driver_data = PLLVAL(163, 3, 2), 	}, 	/* FVco 1158.312960 */
-	{ .frequency = 294235200,	.driver_data = PLLVAL(131, 2, 2), 	}, 	/* FVco 1176.940800 */
-	{ .frequency = 300200727,	.driver_data = PLLVAL(187, 9, 1), 	}, 	/* FVco 600.401454 */
-	{ .frequency = 306358690,	.driver_data = PLLVAL(191, 9, 1), 	}, 	/* FVco 612.717380 */
-	{ .frequency = 312076800,	.driver_data = PLLVAL(121, 5, 1), 	}, 	/* FVco 624.153600 */
-	{ .frequency = 318366720,	.driver_data = PLLVAL(86, 3, 1), 	}, 	/* FVco 636.733440 */
-	{ .frequency = 324172800,	.driver_data = PLLVAL(126, 5, 1), 	}, 	/* FVco 648.345600 */
-	{ .frequency = 330220800,	.driver_data = PLLVAL(109, 4, 1), 	}, 	/* FVco 660.441600 */
-	{ .frequency = 336268800,	.driver_data = PLLVAL(131, 5, 1), 	}, 	/* FVco 672.537600 */
-	{ .frequency = 342074880,	.driver_data = PLLVAL(93, 3, 1), 	}, 	/* FVco 684.149760 */
-	{ .frequency = 348096000,	.driver_data = PLLVAL(177, 7, 1), 	}, 	/* FVco 696.192000 */
-	{ .frequency = 355622400,	.driver_data = PLLVAL(118, 4, 1), 	}, 	/* FVco 711.244800 */
-	{ .frequency = 360460800,	.driver_data = PLLVAL(141, 5, 1), 	}, 	/* FVco 720.921600 */
-	{ .frequency = 366206400,	.driver_data = PLLVAL(165, 6, 1), 	}, 	/* FVco 732.412800 */
-	{ .frequency = 372556800,	.driver_data = PLLVAL(124, 4, 1), 	}, 	/* FVco 745.113600 */
-	{ .frequency = 378201600,	.driver_data = PLLVAL(126, 4, 1), 	}, 	/* FVco 756.403200 */
-	{ .frequency = 384652800,	.driver_data = PLLVAL(151, 5, 1), 	}, 	/* FVco 769.305600 */
-	{ .frequency = 391608000,	.driver_data = PLLVAL(177, 6, 1), 	}, 	/* FVco 783.216000 */
-	{ .frequency = 396264960,	.driver_data = PLLVAL(109, 3, 1), 	}, 	/* FVco 792.529920 */
-	{ .frequency = 402192000,	.driver_data = PLLVAL(87, 2, 1), 	}, 	/* FVco 804.384000 */
-};
-
-static int s3c2440_plls169344_add(struct device *dev,
-				  struct subsys_interface *sif)
-{
-	struct clk *xtal_clk;
-	unsigned long xtal;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	if (IS_ERR(xtal_clk))
-		return PTR_ERR(xtal_clk);
-
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	if (xtal == 169344000) {
-		printk(KERN_INFO "Using PLL table for 16.9344MHz crystal\n");
-		return s3c_plltab_register(s3c2440_plls_169344,
-					   ARRAY_SIZE(s3c2440_plls_169344));
-	}
-
-	return 0;
-}
-
-static struct subsys_interface s3c2440_plls169344_interface = {
-	.name		= "s3c2440_plls169344",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c2440_plls169344_add,
-};
-
-static int __init s3c2440_pll_16934400(void)
-{
-	return subsys_interface_register(&s3c2440_plls169344_interface);
-}
-arch_initcall(s3c2440_pll_16934400);
-
-static struct subsys_interface s3c2442_plls169344_interface = {
-	.name		= "s3c2442_plls169344",
-	.subsys		= &s3c2442_subsys,
-	.add_dev	= s3c2440_plls169344_add,
-};
-
-static int __init s3c2442_pll_16934400(void)
-{
-	return subsys_interface_register(&s3c2442_plls169344_interface);
-}
-arch_initcall(s3c2442_pll_16934400);
diff --git a/arch/arm/mach-s3c/pm-core-s3c24xx.h b/arch/arm/mach-s3c/pm-core-s3c24xx.h
deleted file mode 100644
index a71ed5711019..000000000000
--- a/arch/arm/mach-s3c/pm-core-s3c24xx.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C24xx - PM core support for arch/arm/plat-s3c/pm.c
- */
-
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include "regs-clock.h"
-#include "regs-irq-s3c24xx.h"
-#include "irqs.h"
-
-static inline void s3c_pm_debug_init_uart(void)
-{
-#ifdef CONFIG_SAMSUNG_PM_DEBUG
-	unsigned long tmp = __raw_readl(S3C2410_CLKCON);
-
-	/* re-start uart clocks */
-	tmp |= S3C2410_CLKCON_UART0;
-	tmp |= S3C2410_CLKCON_UART1;
-	tmp |= S3C2410_CLKCON_UART2;
-
-	__raw_writel(tmp, S3C2410_CLKCON);
-	udelay(10);
-#endif
-}
-
-static inline void s3c_pm_arch_prepare_irqs(void)
-{
-	__raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK);
-	__raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK);
-
-	/* ack any outstanding external interrupts before we go to sleep */
-
-	__raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
-	__raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND);
-	__raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND);
-
-}
-
-static inline void s3c_pm_arch_stop_clocks(void)
-{
-	__raw_writel(0x00, S3C2410_CLKCON);  /* turn off clocks over sleep */
-}
-
-/* s3c2410_pm_show_resume_irqs
- *
- * print any IRQs asserted at resume time (ie, we woke from)
-*/
-static inline void s3c_pm_show_resume_irqs(int start, unsigned long which,
-					   unsigned long mask)
-{
-	int i;
-
-	which &= ~mask;
-
-	for (i = 0; i <= 31; i++) {
-		if (which & (1L<<i)) {
-			S3C_PMDBG("IRQ %d asserted at resume\n", start+i);
-		}
-	}
-}
-
-static inline void s3c_pm_arch_show_resume_irqs(void)
-{
-	S3C_PMDBG("post sleep: IRQs 0x%08x, 0x%08x\n",
-		  __raw_readl(S3C2410_SRCPND),
-		  __raw_readl(S3C2410_EINTPEND));
-
-	s3c_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND),
-				s3c_irqwake_intmask);
-
-	s3c_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
-				s3c_irqwake_eintmask);
-}
-
-static inline void s3c_pm_restored_gpios(void) { }
-static inline void samsung_pm_saved_gpios(void) { }
-
-/* state for IRQs over sleep */
-
-/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources
- *
- * set bit to 1 in allow bitfield to enable the wakeup settings on it
-*/
-#ifdef CONFIG_PM_SLEEP
-#define s3c_irqwake_intallow	(1L << 30 | 0xfL)
-#define s3c_irqwake_eintallow	(0x0000fff0L)
-#else
-#define s3c_irqwake_eintallow 0
-#define s3c_irqwake_intallow  0
-#endif
diff --git a/arch/arm/mach-s3c/pm-core-s3c64xx.h b/arch/arm/mach-s3c/pm-core-s3c64xx.h
index 06f564e5cf63..24933c4ea1a2 100644
--- a/arch/arm/mach-s3c/pm-core-s3c64xx.h
+++ b/arch/arm/mach-s3c/pm-core-s3c64xx.h
@@ -20,23 +20,6 @@
 
 static inline void s3c_pm_debug_init_uart(void)
 {
-#ifdef CONFIG_SAMSUNG_PM_DEBUG
-	u32 tmp = __raw_readl(S3C_PCLK_GATE);
-
-	/* As a note, since the S3C64XX UARTs generally have multiple
-	 * clock sources, we simply enable PCLK at the moment and hope
-	 * that the resume settings for the UART are suitable for the
-	 * use with PCLK.
-	 */
-
-	tmp |= S3C_CLKCON_PCLK_UART0;
-	tmp |= S3C_CLKCON_PCLK_UART1;
-	tmp |= S3C_CLKCON_PCLK_UART2;
-	tmp |= S3C_CLKCON_PCLK_UART3;
-
-	__raw_writel(tmp, S3C_PCLK_GATE);
-	udelay(10);
-#endif
 }
 
 static inline void s3c_pm_arch_prepare_irqs(void)
diff --git a/arch/arm/mach-s3c/pm-core.h b/arch/arm/mach-s3c/pm-core.h
index b0e1d277f599..3e0c2df79120 100644
--- a/arch/arm/mach-s3c/pm-core.h
+++ b/arch/arm/mach-s3c/pm-core.h
@@ -1,9 +1,2 @@
 /* SPDX-License-Identifier: GPL-2.0 */
-
-#ifdef CONFIG_ARCH_S3C24XX
-#include "pm-core-s3c24xx.h"
-#endif
-
-#ifdef CONFIG_ARCH_S3C64XX
 #include "pm-core-s3c64xx.h"
-#endif
diff --git a/arch/arm/mach-s3c/pm-h1940.S b/arch/arm/mach-s3c/pm-h1940.S
deleted file mode 100644
index 3bf6685123cb..000000000000
--- a/arch/arm/mach-s3c/pm-h1940.S
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (c) 2006 Ben Dooks <ben-linux@fluff.org>
- *
- * H1940 Suspend to RAM
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include "map.h"
-
-#include "regs-gpio.h"
-
-	.text
-	.global	h1940_pm_return
-
-h1940_pm_return:
-	mov	r0, #S3C2410_PA_GPIO
-	ldr	pc, [r0, #S3C2410_GSTATUS3 - S3C24XX_VA_GPIO]
diff --git a/arch/arm/mach-s3c/pm-s3c2410.c b/arch/arm/mach-s3c/pm-s3c2410.c
deleted file mode 100644
index a66419883735..000000000000
--- a/arch/arm/mach-s3c/pm-s3c2410.c
+++ /dev/null
@@ -1,170 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (c) 2006 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// S3C2410 (and compatible) Power Manager (Suspend-To-RAM) support
-
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/errno.h>
-#include <linux/time.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <asm/mach-types.h>
-
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-
-#include "gpio-cfg.h"
-#include "cpu.h"
-#include "pm.h"
-
-#include "h1940.h"
-
-static void s3c2410_pm_prepare(void)
-{
-	/* ensure at least GSTATUS3 has the resume address */
-
-	__raw_writel(__pa_symbol(s3c_cpu_resume), S3C2410_GSTATUS3);
-
-	S3C_PMDBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
-	S3C_PMDBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
-
-	if (machine_is_h1940()) {
-		void *base = phys_to_virt(H1940_SUSPEND_CHECK);
-		unsigned long ptr;
-		unsigned long calc = 0;
-
-		/* generate check for the bootloader to check on resume */
-
-		for (ptr = 0; ptr < 0x40000; ptr += 0x400)
-			calc += __raw_readl(base+ptr);
-
-		__raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
-	}
-
-	/* RX3715 and RX1950 use similar to H1940 code and the
-	 * same offsets for resume and checksum pointers */
-
-	if (machine_is_rx3715() || machine_is_rx1950()) {
-		void *base = phys_to_virt(H1940_SUSPEND_CHECK);
-		unsigned long ptr;
-		unsigned long calc = 0;
-
-		/* generate check for the bootloader to check on resume */
-
-		for (ptr = 0; ptr < 0x40000; ptr += 0x4)
-			calc += __raw_readl(base+ptr);
-
-		__raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
-	}
-
-	if (machine_is_aml_m5900()) {
-		gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_HIGH, NULL);
-		gpio_free(S3C2410_GPF(2));
-	}
-
-	if (machine_is_rx1950()) {
-		/* According to S3C2442 user's manual, page 7-17,
-		 * when the system is operating in NAND boot mode,
-		 * the hardware pin configuration - EINT[23:21] –
-		 * must be set as input for starting up after
-		 * wakeup from sleep mode
-		 */
-		s3c_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_INPUT);
-		s3c_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPIO_INPUT);
-		s3c_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPIO_INPUT);
-	}
-}
-
-static void s3c2410_pm_resume(void)
-{
-	unsigned long tmp;
-
-	/* unset the return-from-sleep flag, to ensure reset */
-
-	tmp = __raw_readl(S3C2410_GSTATUS2);
-	tmp &= S3C2410_GSTATUS2_OFFRESET;
-	__raw_writel(tmp, S3C2410_GSTATUS2);
-
-	if (machine_is_aml_m5900()) {
-		gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_LOW, NULL);
-		gpio_free(S3C2410_GPF(2));
-	}
-}
-
-struct syscore_ops s3c2410_pm_syscore_ops = {
-	.resume		= s3c2410_pm_resume,
-};
-
-static int s3c2410_pm_add(struct device *dev, struct subsys_interface *sif)
-{
-	pm_cpu_prep = s3c2410_pm_prepare;
-	pm_cpu_sleep = s3c2410_cpu_suspend;
-
-	return 0;
-}
-
-#if defined(CONFIG_CPU_S3C2410)
-static struct subsys_interface s3c2410_pm_interface = {
-	.name		= "s3c2410_pm",
-	.subsys		= &s3c2410_subsys,
-	.add_dev	= s3c2410_pm_add,
-};
-
-/* register ourselves */
-
-static int __init s3c2410_pm_drvinit(void)
-{
-	return subsys_interface_register(&s3c2410_pm_interface);
-}
-
-arch_initcall(s3c2410_pm_drvinit);
-
-static struct subsys_interface s3c2410a_pm_interface = {
-	.name		= "s3c2410a_pm",
-	.subsys		= &s3c2410a_subsys,
-	.add_dev	= s3c2410_pm_add,
-};
-
-static int __init s3c2410a_pm_drvinit(void)
-{
-	return subsys_interface_register(&s3c2410a_pm_interface);
-}
-
-arch_initcall(s3c2410a_pm_drvinit);
-#endif
-
-#if defined(CONFIG_CPU_S3C2440)
-static struct subsys_interface s3c2440_pm_interface = {
-	.name		= "s3c2440_pm",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c2410_pm_add,
-};
-
-static int __init s3c2440_pm_drvinit(void)
-{
-	return subsys_interface_register(&s3c2440_pm_interface);
-}
-
-arch_initcall(s3c2440_pm_drvinit);
-#endif
-
-#if defined(CONFIG_CPU_S3C2442)
-static struct subsys_interface s3c2442_pm_interface = {
-	.name		= "s3c2442_pm",
-	.subsys		= &s3c2442_subsys,
-	.add_dev	= s3c2410_pm_add,
-};
-
-static int __init s3c2442_pm_drvinit(void)
-{
-	return subsys_interface_register(&s3c2442_pm_interface);
-}
-
-arch_initcall(s3c2442_pm_drvinit);
-#endif
diff --git a/arch/arm/mach-s3c/pm-s3c2412.c b/arch/arm/mach-s3c/pm-s3c2412.c
deleted file mode 100644
index ed3b4cfc7c0f..000000000000
--- a/arch/arm/mach-s3c/pm-s3c2412.c
+++ /dev/null
@@ -1,126 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2006 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// http://armlinux.simtec.co.uk/.
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/cacheflush.h>
-#include <asm/irq.h>
-
-#include "irqs.h"
-#include "regs-gpio.h"
-
-#include "cpu.h"
-#include "pm.h"
-#include "wakeup-mask.h"
-
-#include "regs-dsc-s3c24xx.h"
-#include "s3c2412-power.h"
-
-extern void s3c2412_sleep_enter(void);
-
-static int s3c2412_cpu_suspend(unsigned long arg)
-{
-	unsigned long tmp;
-
-	/* set our standby method to sleep */
-
-	tmp = __raw_readl(S3C2412_PWRCFG);
-	tmp |= S3C2412_PWRCFG_STANDBYWFI_SLEEP;
-	__raw_writel(tmp, S3C2412_PWRCFG);
-
-	s3c2412_sleep_enter();
-
-	pr_info("Failed to suspend the system\n");
-	return 1; /* Aborting suspend */
-}
-
-/* mapping of interrupts to parts of the wakeup mask */
-static const struct samsung_wakeup_mask wake_irqs[] = {
-	{ .irq = IRQ_RTC,	.bit = S3C2412_PWRCFG_RTC_MASKIRQ, },
-};
-
-static void s3c2412_pm_prepare(void)
-{
-	samsung_sync_wakemask(S3C2412_PWRCFG,
-			      wake_irqs, ARRAY_SIZE(wake_irqs));
-}
-
-static int s3c2412_pm_add(struct device *dev, struct subsys_interface *sif)
-{
-	pm_cpu_prep = s3c2412_pm_prepare;
-	pm_cpu_sleep = s3c2412_cpu_suspend;
-
-	return 0;
-}
-
-static struct sleep_save s3c2412_sleep[] = {
-	SAVE_ITEM(S3C2412_DSC0),
-	SAVE_ITEM(S3C2412_DSC1),
-	SAVE_ITEM(S3C2413_GPJDAT),
-	SAVE_ITEM(S3C2413_GPJCON),
-	SAVE_ITEM(S3C2413_GPJUP),
-
-	/* save the PWRCFG to get back to original sleep method */
-
-	SAVE_ITEM(S3C2412_PWRCFG),
-
-	/* save the sleep configuration anyway, just in case these
-	 * get damaged during wakeup */
-
-	SAVE_ITEM(S3C2412_GPBSLPCON),
-	SAVE_ITEM(S3C2412_GPCSLPCON),
-	SAVE_ITEM(S3C2412_GPDSLPCON),
-	SAVE_ITEM(S3C2412_GPFSLPCON),
-	SAVE_ITEM(S3C2412_GPGSLPCON),
-	SAVE_ITEM(S3C2412_GPHSLPCON),
-	SAVE_ITEM(S3C2413_GPJSLPCON),
-};
-
-static struct subsys_interface s3c2412_pm_interface = {
-	.name		= "s3c2412_pm",
-	.subsys		= &s3c2412_subsys,
-	.add_dev	= s3c2412_pm_add,
-};
-
-static __init int s3c2412_pm_init(void)
-{
-	return subsys_interface_register(&s3c2412_pm_interface);
-}
-
-arch_initcall(s3c2412_pm_init);
-
-static int s3c2412_pm_suspend(void)
-{
-	s3c_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
-	return 0;
-}
-
-static void s3c2412_pm_resume(void)
-{
-	unsigned long tmp;
-
-	tmp = __raw_readl(S3C2412_PWRCFG);
-	tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK;
-	tmp |=  S3C2412_PWRCFG_STANDBYWFI_IDLE;
-	__raw_writel(tmp, S3C2412_PWRCFG);
-
-	s3c_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep));
-}
-
-struct syscore_ops s3c2412_pm_syscore_ops = {
-	.suspend	= s3c2412_pm_suspend,
-	.resume		= s3c2412_pm_resume,
-};
diff --git a/arch/arm/mach-s3c/pm-s3c2416.c b/arch/arm/mach-s3c/pm-s3c2416.c
deleted file mode 100644
index f69ad84cf4ff..000000000000
--- a/arch/arm/mach-s3c/pm-s3c2416.c
+++ /dev/null
@@ -1,81 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2010 Samsung Electronics Co., Ltd.
-//		http://www.samsung.com
-//
-// S3C2416 - PM support (Based on Ben Dooks' S3C2412 PM support)
-
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/io.h>
-
-#include <asm/cacheflush.h>
-
-#include "regs-s3c2443-clock.h"
-
-#include "cpu.h"
-#include "pm.h"
-
-#include "s3c2412-power.h"
-
-#ifdef CONFIG_PM_SLEEP
-extern void s3c2412_sleep_enter(void);
-
-static int s3c2416_cpu_suspend(unsigned long arg)
-{
-	/* enable wakeup sources regardless of battery state */
-	__raw_writel(S3C2443_PWRCFG_SLEEP, S3C2443_PWRCFG);
-
-	/* set the mode as sleep, 2BED represents "Go to BED" */
-	__raw_writel(0x2BED, S3C2443_PWRMODE);
-
-	s3c2412_sleep_enter();
-
-	pr_info("Failed to suspend the system\n");
-	return 1; /* Aborting suspend */
-}
-
-static void s3c2416_pm_prepare(void)
-{
-	/*
-	 * write the magic value u-boot uses to check for resume into
-	 * the INFORM0 register, and ensure INFORM1 is set to the
-	 * correct address to resume from.
-	 */
-	__raw_writel(0x2BED, S3C2412_INFORM0);
-	__raw_writel(__pa_symbol(s3c_cpu_resume), S3C2412_INFORM1);
-}
-
-static int s3c2416_pm_add(struct device *dev, struct subsys_interface *sif)
-{
-	pm_cpu_prep = s3c2416_pm_prepare;
-	pm_cpu_sleep = s3c2416_cpu_suspend;
-
-	return 0;
-}
-
-static struct subsys_interface s3c2416_pm_interface = {
-	.name		= "s3c2416_pm",
-	.subsys		= &s3c2416_subsys,
-	.add_dev	= s3c2416_pm_add,
-};
-
-static __init int s3c2416_pm_init(void)
-{
-	return subsys_interface_register(&s3c2416_pm_interface);
-}
-
-arch_initcall(s3c2416_pm_init);
-#endif
-
-static void s3c2416_pm_resume(void)
-{
-	/* unset the return-from-sleep amd inform flags */
-	__raw_writel(0x0, S3C2443_PWRMODE);
-	__raw_writel(0x0, S3C2412_INFORM0);
-	__raw_writel(0x0, S3C2412_INFORM1);
-}
-
-struct syscore_ops s3c2416_pm_syscore_ops = {
-	.resume		= s3c2416_pm_resume,
-};
diff --git a/arch/arm/mach-s3c/pm-s3c24xx.c b/arch/arm/mach-s3c/pm-s3c24xx.c
deleted file mode 100644
index 3a8f5c38882e..000000000000
--- a/arch/arm/mach-s3c/pm-s3c24xx.c
+++ /dev/null
@@ -1,121 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (c) 2004-2006 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// S3C24XX Power Manager (Suspend-To-RAM) support
-//
-// See Documentation/arm/samsung-s3c24xx/suspend.rst for more information
-//
-// Parts based on arch/arm/mach-pxa/pm.c
-//
-// Thanks to Dimitry Andric for debugging
-
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/errno.h>
-#include <linux/time.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/io.h>
-
-#include "regs-clock.h"
-#include "regs-gpio.h"
-#include "regs-irq.h"
-#include "gpio-samsung.h"
-
-#include <asm/mach/time.h>
-
-#include "gpio-cfg.h"
-#include "pm.h"
-
-#include "regs-mem-s3c24xx.h"
-
-#define PFX "s3c24xx-pm: "
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save core_save[] = {
-	/* we restore the timings here, with the proviso that the board
-	 * brings the system up in an slower, or equal frequency setting
-	 * to the original system.
-	 *
-	 * if we cannot guarantee this, then things are going to go very
-	 * wrong here, as we modify the refresh and both pll settings.
-	 */
-
-	SAVE_ITEM(S3C2410_BWSCON),
-	SAVE_ITEM(S3C2410_BANKCON0),
-	SAVE_ITEM(S3C2410_BANKCON1),
-	SAVE_ITEM(S3C2410_BANKCON2),
-	SAVE_ITEM(S3C2410_BANKCON3),
-	SAVE_ITEM(S3C2410_BANKCON4),
-	SAVE_ITEM(S3C2410_BANKCON5),
-};
-#endif
-
-/* s3c_pm_check_resume_pin
- *
- * check to see if the pin is configured correctly for sleep mode, and
- * make any necessary adjustments if it is not
-*/
-
-static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
-{
-	unsigned long irqstate;
-	unsigned long pinstate;
-	int irq = gpio_to_irq(pin);
-
-	if (irqoffs < 4)
-		irqstate = s3c_irqwake_intmask & (1L<<irqoffs);
-	else
-		irqstate = s3c_irqwake_eintmask & (1L<<irqoffs);
-
-	pinstate = s3c_gpio_getcfg(pin);
-
-	if (!irqstate) {
-		if (pinstate == S3C2410_GPIO_IRQ)
-			S3C_PMDBG("Leaving IRQ %d (pin %d) as is\n", irq, pin);
-	} else {
-		if (pinstate == S3C2410_GPIO_IRQ) {
-			S3C_PMDBG("Disabling IRQ %d (pin %d)\n", irq, pin);
-			s3c_gpio_cfgpin(pin, S3C2410_GPIO_INPUT);
-		}
-	}
-}
-
-/* s3c_pm_configure_extint
- *
- * configure all external interrupt pins
-*/
-
-void s3c_pm_configure_extint(void)
-{
-	int pin;
-
-	/* for each of the external interrupts (EINT0..EINT15) we
-	 * need to check whether it is an external interrupt source,
-	 * and then configure it as an input if it is not
-	*/
-
-	for (pin = S3C2410_GPF(0); pin <= S3C2410_GPF(7); pin++) {
-		s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF(0));
-	}
-
-	for (pin = S3C2410_GPG(0); pin <= S3C2410_GPG(7); pin++) {
-		s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG(0))+8);
-	}
-}
-
-#ifdef CONFIG_PM_SLEEP
-void s3c_pm_restore_core(void)
-{
-	s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
-}
-
-void s3c_pm_save_core(void)
-{
-	s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
-}
-#endif
diff --git a/arch/arm/mach-s3c/pm-s3c64xx.c b/arch/arm/mach-s3c/pm-s3c64xx.c
index 7bc7417fd803..284d5f462513 100644
--- a/arch/arm/mach-s3c/pm-s3c64xx.c
+++ b/arch/arm/mach-s3c/pm-s3c64xx.c
@@ -173,23 +173,6 @@ static struct s3c64xx_pm_domain *s3c64xx_pm_domains[] = {
 	&s3c64xx_pm_f,
 };
 
-#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
-void s3c_pm_debug_smdkled(u32 set, u32 clear)
-{
-	unsigned long flags;
-	int i;
-
-	local_irq_save(flags);
-	for (i = 0; i < 4; i++) {
-		if (clear & (1 << i))
-			gpio_set_value(S3C64XX_GPN(12 + i), 0);
-		if (set & (1 << i))
-			gpio_set_value(S3C64XX_GPN(12 + i), 1);
-	}
-	local_irq_restore(flags);
-}
-#endif
-
 #ifdef CONFIG_PM_SLEEP
 static struct sleep_save core_save[] = {
 	SAVE_ITEM(S3C64XX_MEM0DRVCON),
@@ -224,8 +207,6 @@ void s3c_pm_restore_core(void)
 {
 	__raw_writel(0, S3C64XX_EINT_MASK);
 
-	s3c_pm_debug_smdkled(1 << 2, 0);
-
 	s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
 	s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
 }
@@ -258,9 +239,6 @@ static int s3c64xx_cpu_suspend(unsigned long arg)
 	__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT),
 		     S3C64XX_WAKEUP_STAT);
 
-	/* set the LED state to 0110 over sleep */
-	s3c_pm_debug_smdkled(3 << 1, 0xf);
-
 	/* issue the standby signal into the pm unit. Note, we
 	 * issue a write-buffer drain just in case */
 
@@ -305,56 +283,6 @@ static void s3c64xx_pm_prepare(void)
 	__raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT);
 }
 
-#ifdef CONFIG_SAMSUNG_PM_DEBUG
-void s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save)
-{
-	u32 ucon;
-	u32 ucon_clk
-	u32 save_clk;
-	u32 new_ucon;
-	u32 delta;
-
-	if (!soc_is_s3c64xx())
-		return;
-
-	ucon = __raw_readl(regs + S3C2410_UCON);
-	ucon_clk = ucon & S3C6400_UCON_CLKMASK;
-	sav_clk = save->ucon & S3C6400_UCON_CLKMASK;
-
-	/* S3C64XX UART blocks only support level interrupts, so ensure that
-	 * when we restore unused UART blocks we force the level interrupt
-	 * settings. */
-	save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
-
-	/* We have a constraint on changing the clock type of the UART
-	 * between UCLKx and PCLK, so ensure that when we restore UCON
-	 * that the CLK field is correctly modified if the bootloader
-	 * has changed anything.
-	 */
-	if (ucon_clk != save_clk) {
-		new_ucon = save->ucon;
-		delta = ucon_clk ^ save_clk;
-
-		/* change from UCLKx => wrong PCLK,
-		 * either UCLK can be tested for by a bit-test
-		 * with UCLK0 */
-		if (ucon_clk & S3C6400_UCON_UCLK0 &&
-		    !(save_clk & S3C6400_UCON_UCLK0) &&
-		    delta & S3C6400_UCON_PCLK2) {
-			new_ucon &= ~S3C6400_UCON_UCLK0;
-		} else if (delta == S3C6400_UCON_PCLK2) {
-			/* as an precaution, don't change from
-			 * PCLK2 => PCLK or vice-versa */
-			new_ucon ^= S3C6400_UCON_PCLK2;
-		}
-
-		S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
-			  ucon, new_ucon, save->ucon);
-		save->ucon = new_ucon;
-	}
-}
-#endif
-
 int __init s3c64xx_pm_init(void)
 {
 	int i;
@@ -384,17 +312,6 @@ static __init int s3c64xx_pm_initcall(void)
 	pm_cpu_prep = s3c64xx_pm_prepare;
 	pm_cpu_sleep = s3c64xx_cpu_suspend;
 
-#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
-	gpio_request(S3C64XX_GPN(12), "DEBUG_LED0");
-	gpio_request(S3C64XX_GPN(13), "DEBUG_LED1");
-	gpio_request(S3C64XX_GPN(14), "DEBUG_LED2");
-	gpio_request(S3C64XX_GPN(15), "DEBUG_LED3");
-	gpio_direction_output(S3C64XX_GPN(12), 0);
-	gpio_direction_output(S3C64XX_GPN(13), 0);
-	gpio_direction_output(S3C64XX_GPN(14), 0);
-	gpio_direction_output(S3C64XX_GPN(15), 0);
-#endif
-
 	return 0;
 }
 arch_initcall(s3c64xx_pm_initcall);
diff --git a/arch/arm/mach-s3c/pm.c b/arch/arm/mach-s3c/pm.c
index 06f019690d81..5698cbceaf7a 100644
--- a/arch/arm/mach-s3c/pm.c
+++ b/arch/arm/mach-s3c/pm.c
@@ -100,7 +100,7 @@ static int s3c_pm_enter(suspend_state_t state)
 		samsung_pm_saved_gpios();
 	}
 
-	s3c_pm_save_uarts(soc_is_s3c2410());
+	s3c_pm_save_uarts(false);
 	s3c_pm_save_core();
 
 	/* set the irq configuration for wake */
@@ -137,7 +137,7 @@ static int s3c_pm_enter(suspend_state_t state)
 	/* restore the system state */
 
 	s3c_pm_restore_core();
-	s3c_pm_restore_uarts(soc_is_s3c2410());
+	s3c_pm_restore_uarts(false);
 
 	if (!of_have_populated_dt()) {
 		samsung_pm_restore_gpios();
@@ -152,9 +152,6 @@ static int s3c_pm_enter(suspend_state_t state)
 
 	S3C_PMDBG("%s: post sleep, preparing to return\n", __func__);
 
-	/* LEDs should now be 1110 */
-	s3c_pm_debug_smdkled(1 << 1, 0);
-
 	s3c_pm_check_restore();
 
 	/* ok, let's return from sleep */
diff --git a/arch/arm/mach-s3c/pm.h b/arch/arm/mach-s3c/pm.h
index eed61e585457..35d266ab6958 100644
--- a/arch/arm/mach-s3c/pm.h
+++ b/arch/arm/mach-s3c/pm.h
@@ -64,18 +64,6 @@ extern int s3c_irqext_wake(struct irq_data *data, unsigned int state);
 #define s3c_irqext_wake NULL
 #endif
 
-#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
-/**
- * s3c_pm_debug_smdkled() - Debug PM suspend/resume via SMDK Board LEDs
- * @set: set bits for the state of the LEDs
- * @clear: clear bits for the state of the LEDs.
- */
-extern void s3c_pm_debug_smdkled(u32 set, u32 clear);
-
-#else
-static inline void s3c_pm_debug_smdkled(u32 set, u32 clear) { }
-#endif /* CONFIG_S3C_PM_DEBUG_LED_SMDK */
-
 /**
  * s3c_pm_configure_extint() - ensure pins are correctly set for IRQ
  *
diff --git a/arch/arm/mach-s3c/regs-adc.h b/arch/arm/mach-s3c/regs-adc.h
deleted file mode 100644
index 58953c7381dd..000000000000
--- a/arch/arm/mach-s3c/regs-adc.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2004 Shannon Holland <holland@loser.net>
- *
- * S3C2410 ADC registers
- */
-
-#ifndef __ASM_ARCH_REGS_ADC_H
-#define __ASM_ARCH_REGS_ADC_H "regs-adc.h"
-
-#define S3C2410_ADCREG(x) (x)
-
-#define S3C2410_ADCCON	   S3C2410_ADCREG(0x00)
-#define S3C2410_ADCTSC	   S3C2410_ADCREG(0x04)
-#define S3C2410_ADCDLY	   S3C2410_ADCREG(0x08)
-#define S3C2410_ADCDAT0	   S3C2410_ADCREG(0x0C)
-#define S3C2410_ADCDAT1	   S3C2410_ADCREG(0x10)
-#define S3C64XX_ADCUPDN		S3C2410_ADCREG(0x14)
-#define S3C2443_ADCMUX		S3C2410_ADCREG(0x18)
-#define S3C64XX_ADCCLRINT	S3C2410_ADCREG(0x18)
-#define S5P_ADCMUX		S3C2410_ADCREG(0x1C)
-#define S3C64XX_ADCCLRINTPNDNUP	S3C2410_ADCREG(0x20)
-
-
-/* ADCCON Register Bits */
-#define S3C64XX_ADCCON_RESSEL		(1<<16)
-#define S3C2410_ADCCON_ECFLG		(1<<15)
-#define S3C2410_ADCCON_PRSCEN		(1<<14)
-#define S3C2410_ADCCON_PRSCVL(x)	(((x)&0xFF)<<6)
-#define S3C2410_ADCCON_PRSCVLMASK	(0xFF<<6)
-#define S3C2410_ADCCON_SELMUX(x)	(((x)&0x7)<<3)
-#define S3C2410_ADCCON_MUXMASK		(0x7<<3)
-#define S3C2416_ADCCON_RESSEL		(1 << 3)
-#define S3C2410_ADCCON_STDBM		(1<<2)
-#define S3C2410_ADCCON_READ_START	(1<<1)
-#define S3C2410_ADCCON_ENABLE_START	(1<<0)
-#define S3C2410_ADCCON_STARTMASK	(0x3<<0)
-
-
-/* ADCTSC Register Bits */
-#define S3C2443_ADCTSC_UD_SEN		(1 << 8)
-#define S3C2410_ADCTSC_YM_SEN		(1<<7)
-#define S3C2410_ADCTSC_YP_SEN		(1<<6)
-#define S3C2410_ADCTSC_XM_SEN		(1<<5)
-#define S3C2410_ADCTSC_XP_SEN		(1<<4)
-#define S3C2410_ADCTSC_PULL_UP_DISABLE	(1<<3)
-#define S3C2410_ADCTSC_AUTO_PST		(1<<2)
-#define S3C2410_ADCTSC_XY_PST(x)	(((x)&0x3)<<0)
-
-/* ADCDAT0 Bits */
-#define S3C2410_ADCDAT0_UPDOWN		(1<<15)
-#define S3C2410_ADCDAT0_AUTO_PST	(1<<14)
-#define S3C2410_ADCDAT0_XY_PST		(0x3<<12)
-#define S3C2410_ADCDAT0_XPDATA_MASK	(0x03FF)
-
-/* ADCDAT1 Bits */
-#define S3C2410_ADCDAT1_UPDOWN		(1<<15)
-#define S3C2410_ADCDAT1_AUTO_PST	(1<<14)
-#define S3C2410_ADCDAT1_XY_PST		(0x3<<12)
-#define S3C2410_ADCDAT1_YPDATA_MASK	(0x03FF)
-
-#endif /* __ASM_ARCH_REGS_ADC_H */
-
-
diff --git a/arch/arm/mach-s3c/regs-clock-s3c24xx.h b/arch/arm/mach-s3c/regs-clock-s3c24xx.h
deleted file mode 100644
index 933ddb5eedec..000000000000
--- a/arch/arm/mach-s3c/regs-clock-s3c24xx.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C2410 clock register definitions
- */
-
-#ifndef __ASM_ARM_REGS_CLOCK
-#define __ASM_ARM_REGS_CLOCK
-
-#include "map.h"
-
-#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
-
-#define S3C2410_PLLVAL(_m,_p,_s) ((_m) << 12 | ((_p) << 4) | ((_s)))
-
-#define S3C2410_LOCKTIME    S3C2410_CLKREG(0x00)
-#define S3C2410_MPLLCON	    S3C2410_CLKREG(0x04)
-#define S3C2410_UPLLCON	    S3C2410_CLKREG(0x08)
-#define S3C2410_CLKCON	    S3C2410_CLKREG(0x0C)
-#define S3C2410_CLKSLOW	    S3C2410_CLKREG(0x10)
-#define S3C2410_CLKDIVN	    S3C2410_CLKREG(0x14)
-
-#define S3C2410_CLKCON_IDLE	     (1<<2)
-#define S3C2410_CLKCON_POWER	     (1<<3)
-#define S3C2410_CLKCON_NAND	     (1<<4)
-#define S3C2410_CLKCON_LCDC	     (1<<5)
-#define S3C2410_CLKCON_USBH	     (1<<6)
-#define S3C2410_CLKCON_USBD	     (1<<7)
-#define S3C2410_CLKCON_PWMT	     (1<<8)
-#define S3C2410_CLKCON_SDI	     (1<<9)
-#define S3C2410_CLKCON_UART0	     (1<<10)
-#define S3C2410_CLKCON_UART1	     (1<<11)
-#define S3C2410_CLKCON_UART2	     (1<<12)
-#define S3C2410_CLKCON_GPIO	     (1<<13)
-#define S3C2410_CLKCON_RTC	     (1<<14)
-#define S3C2410_CLKCON_ADC	     (1<<15)
-#define S3C2410_CLKCON_IIC	     (1<<16)
-#define S3C2410_CLKCON_IIS	     (1<<17)
-#define S3C2410_CLKCON_SPI	     (1<<18)
-
-#define S3C2410_CLKDIVN_PDIVN	     (1<<0)
-#define S3C2410_CLKDIVN_HDIVN	     (1<<1)
-
-#define S3C2410_CLKSLOW_UCLK_OFF	(1<<7)
-#define S3C2410_CLKSLOW_MPLL_OFF	(1<<5)
-#define S3C2410_CLKSLOW_SLOW		(1<<4)
-#define S3C2410_CLKSLOW_SLOWVAL(x)	(x)
-#define S3C2410_CLKSLOW_GET_SLOWVAL(x)	((x) & 7)
-
-#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
-
-/* extra registers */
-#define S3C2440_CAMDIVN	    S3C2410_CLKREG(0x18)
-
-#define S3C2440_CLKCON_CAMERA        (1<<19)
-#define S3C2440_CLKCON_AC97          (1<<20)
-
-#define S3C2440_CLKDIVN_PDIVN	     (1<<0)
-#define S3C2440_CLKDIVN_HDIVN_MASK   (3<<1)
-#define S3C2440_CLKDIVN_HDIVN_1      (0<<1)
-#define S3C2440_CLKDIVN_HDIVN_2      (1<<1)
-#define S3C2440_CLKDIVN_HDIVN_4_8    (2<<1)
-#define S3C2440_CLKDIVN_HDIVN_3_6    (3<<1)
-#define S3C2440_CLKDIVN_UCLK         (1<<3)
-
-#define S3C2440_CAMDIVN_CAMCLK_MASK  (0xf<<0)
-#define S3C2440_CAMDIVN_CAMCLK_SEL   (1<<4)
-#define S3C2440_CAMDIVN_HCLK3_HALF   (1<<8)
-#define S3C2440_CAMDIVN_HCLK4_HALF   (1<<9)
-#define S3C2440_CAMDIVN_DVSEN        (1<<12)
-
-#define S3C2442_CAMDIVN_CAMCLK_DIV3  (1<<5)
-
-#endif /* CONFIG_CPU_S3C2440 or CONFIG_CPU_S3C2442 */
-
-#if defined(CONFIG_CPU_S3C2412)
-
-#define S3C2412_OSCSET		S3C2410_CLKREG(0x18)
-#define S3C2412_CLKSRC		S3C2410_CLKREG(0x1C)
-
-#define S3C2412_PLLCON_OFF		(1<<20)
-
-#define S3C2412_CLKDIVN_PDIVN		(1<<2)
-#define S3C2412_CLKDIVN_HDIVN_MASK	(3<<0)
-#define S3C2412_CLKDIVN_ARMDIVN		(1<<3)
-#define S3C2412_CLKDIVN_DVSEN		(1<<4)
-#define S3C2412_CLKDIVN_HALFHCLK	(1<<5)
-#define S3C2412_CLKDIVN_USB48DIV	(1<<6)
-#define S3C2412_CLKDIVN_UARTDIV_MASK	(15<<8)
-#define S3C2412_CLKDIVN_UARTDIV_SHIFT	(8)
-#define S3C2412_CLKDIVN_I2SDIV_MASK	(15<<12)
-#define S3C2412_CLKDIVN_I2SDIV_SHIFT	(12)
-#define S3C2412_CLKDIVN_CAMDIV_MASK	(15<<16)
-#define S3C2412_CLKDIVN_CAMDIV_SHIFT	(16)
-
-#define S3C2412_CLKCON_WDT		(1<<28)
-#define S3C2412_CLKCON_SPI		(1<<27)
-#define S3C2412_CLKCON_IIS		(1<<26)
-#define S3C2412_CLKCON_IIC		(1<<25)
-#define S3C2412_CLKCON_ADC		(1<<24)
-#define S3C2412_CLKCON_RTC		(1<<23)
-#define S3C2412_CLKCON_GPIO		(1<<22)
-#define S3C2412_CLKCON_UART2		(1<<21)
-#define S3C2412_CLKCON_UART1		(1<<20)
-#define S3C2412_CLKCON_UART0		(1<<19)
-#define S3C2412_CLKCON_SDI		(1<<18)
-#define S3C2412_CLKCON_PWMT		(1<<17)
-#define S3C2412_CLKCON_USBD		(1<<16)
-#define S3C2412_CLKCON_CAMCLK		(1<<15)
-#define S3C2412_CLKCON_UARTCLK		(1<<14)
-/* missing 13 */
-#define S3C2412_CLKCON_USB_HOST48	(1<<12)
-#define S3C2412_CLKCON_USB_DEV48	(1<<11)
-#define S3C2412_CLKCON_HCLKdiv2		(1<<10)
-#define S3C2412_CLKCON_HCLKx2		(1<<9)
-#define S3C2412_CLKCON_SDRAM		(1<<8)
-/* missing 7 */
-#define S3C2412_CLKCON_USBH		S3C2410_CLKCON_USBH
-#define S3C2412_CLKCON_LCDC		S3C2410_CLKCON_LCDC
-#define S3C2412_CLKCON_NAND		S3C2410_CLKCON_NAND
-#define S3C2412_CLKCON_DMA3		(1<<3)
-#define S3C2412_CLKCON_DMA2		(1<<2)
-#define S3C2412_CLKCON_DMA1		(1<<1)
-#define S3C2412_CLKCON_DMA0		(1<<0)
-
-/* clock sourec controls */
-
-#define S3C2412_CLKSRC_EXTCLKDIV_MASK		(7 << 0)
-#define S3C2412_CLKSRC_EXTCLKDIV_SHIFT		(0)
-#define S3C2412_CLKSRC_MDIVCLK_EXTCLKDIV	(1<<3)
-#define S3C2412_CLKSRC_MSYSCLK_MPLL		(1<<4)
-#define S3C2412_CLKSRC_USYSCLK_UPLL		(1<<5)
-#define S3C2412_CLKSRC_UARTCLK_MPLL		(1<<8)
-#define S3C2412_CLKSRC_I2SCLK_MPLL		(1<<9)
-#define S3C2412_CLKSRC_USBCLK_HCLK		(1<<10)
-#define S3C2412_CLKSRC_CAMCLK_HCLK		(1<<11)
-#define S3C2412_CLKSRC_UREFCLK_EXTCLK	(1<<12)
-#define S3C2412_CLKSRC_EREFCLK_EXTCLK	(1<<14)
-
-#endif /* CONFIG_CPU_S3C2412 */
-
-#define S3C2416_CLKDIV2		S3C2410_CLKREG(0x28)
-
-#endif /* __ASM_ARM_REGS_CLOCK */
diff --git a/arch/arm/mach-s3c/regs-clock.h b/arch/arm/mach-s3c/regs-clock.h
index 7df31f203d28..fc7e3886b07c 100644
--- a/arch/arm/mach-s3c/regs-clock.h
+++ b/arch/arm/mach-s3c/regs-clock.h
@@ -1,9 +1,2 @@
 /* SPDX-License-Identifier: GPL-2.0 */
-
-#ifdef CONFIG_ARCH_S3C24XX
-#include "regs-clock-s3c24xx.h"
-#endif
-
-#ifdef CONFIG_ARCH_S3C64XX
 #include "regs-clock-s3c64xx.h"
-#endif
diff --git a/arch/arm/mach-s3c/regs-dsc-s3c24xx.h b/arch/arm/mach-s3c/regs-dsc-s3c24xx.h
deleted file mode 100644
index 8b8b572aef04..000000000000
--- a/arch/arm/mach-s3c/regs-dsc-s3c24xx.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * S3C2440/S3C2412 Signal Drive Strength Control
- */
-
-
-#ifndef __ASM_ARCH_REGS_DSC_S3C24XX_H
-#define __ASM_ARCH_REGS_DSC_S3C24XX_H __FILE__
-
-/* S3C2412 */
-#define S3C2412_DSC0	   S3C2410_GPIOREG(0xdc)
-#define S3C2412_DSC1	   S3C2410_GPIOREG(0xe0)
-
-/* S3C2440 */
-#define S3C2440_DSC0	   S3C2410_GPIOREG(0xc4)
-#define S3C2440_DSC1	   S3C2410_GPIOREG(0xc8)
-
-#endif	/* __ASM_ARCH_REGS_DSC_S3C24XX_H */
-
diff --git a/arch/arm/mach-s3c/regs-gpio-s3c24xx.h b/arch/arm/mach-s3c/regs-gpio-s3c24xx.h
deleted file mode 100644
index 9a7e262268a7..000000000000
--- a/arch/arm/mach-s3c/regs-gpio-s3c24xx.h
+++ /dev/null
@@ -1,608 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2003-2004 Simtec Electronics <linux@simtec.co.uk>
- *	http://www.simtec.co.uk/products/SWLINUX/
- *
- * S3C2410 GPIO register definitions
- */
-
-
-#ifndef __ASM_ARCH_REGS_GPIO_H
-#define __ASM_ARCH_REGS_GPIO_H
-
-#include "map-s3c.h"
-
-#define S3C24XX_MISCCR		S3C24XX_GPIOREG2(0x80)
-
-/* general configuration options */
-
-#define S3C2410_GPIO_LEAVE   (0xFFFFFFFF)
-#define S3C2410_GPIO_INPUT   (0xFFFFFFF0)	/* not available on A */
-#define S3C2410_GPIO_OUTPUT  (0xFFFFFFF1)
-#define S3C2410_GPIO_IRQ     (0xFFFFFFF2)	/* not available for all */
-#define S3C2410_GPIO_SFN2    (0xFFFFFFF2)	/* bank A => addr/cs/nand */
-#define S3C2410_GPIO_SFN3    (0xFFFFFFF3)	/* not available on A */
-
-/* register address for the GPIO registers.
- * S3C24XX_GPIOREG2 is for the second set of registers in the
- * GPIO which move between s3c2410 and s3c2412 type systems */
-
-#define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO)
-#define S3C24XX_GPIOREG2(x) ((x) + S3C24XX_VA_GPIO2)
-
-
-/* configure GPIO ports A..G */
-
-/* port A - S3C2410: 22bits, zero in bit X makes pin X output
- * 1 makes port special function, this is default
-*/
-#define S3C2410_GPACON	   S3C2410_GPIOREG(0x00)
-#define S3C2410_GPADAT	   S3C2410_GPIOREG(0x04)
-
-#define S3C2410_GPA0_ADDR0   (1<<0)
-#define S3C2410_GPA1_ADDR16  (1<<1)
-#define S3C2410_GPA2_ADDR17  (1<<2)
-#define S3C2410_GPA3_ADDR18  (1<<3)
-#define S3C2410_GPA4_ADDR19  (1<<4)
-#define S3C2410_GPA5_ADDR20  (1<<5)
-#define S3C2410_GPA6_ADDR21  (1<<6)
-#define S3C2410_GPA7_ADDR22  (1<<7)
-#define S3C2410_GPA8_ADDR23  (1<<8)
-#define S3C2410_GPA9_ADDR24  (1<<9)
-#define S3C2410_GPA10_ADDR25 (1<<10)
-#define S3C2410_GPA11_ADDR26 (1<<11)
-#define S3C2410_GPA12_nGCS1  (1<<12)
-#define S3C2410_GPA13_nGCS2  (1<<13)
-#define S3C2410_GPA14_nGCS3  (1<<14)
-#define S3C2410_GPA15_nGCS4  (1<<15)
-#define S3C2410_GPA16_nGCS5  (1<<16)
-#define S3C2410_GPA17_CLE    (1<<17)
-#define S3C2410_GPA18_ALE    (1<<18)
-#define S3C2410_GPA19_nFWE   (1<<19)
-#define S3C2410_GPA20_nFRE   (1<<20)
-#define S3C2410_GPA21_nRSTOUT (1<<21)
-#define S3C2410_GPA22_nFCE   (1<<22)
-
-/* 0x08 and 0x0c are reserved on S3C2410 */
-
-/* S3C2410:
- * GPB is 10 IO pins, each configured by 2 bits each in GPBCON.
- *   00 = input, 01 = output, 10=special function, 11=reserved
-
- * bit 0,1 = pin 0, 2,3= pin 1...
- *
- * CPBUP = pull up resistor control, 1=disabled, 0=enabled
-*/
-
-#define S3C2410_GPBCON	   S3C2410_GPIOREG(0x10)
-#define S3C2410_GPBDAT	   S3C2410_GPIOREG(0x14)
-#define S3C2410_GPBUP	   S3C2410_GPIOREG(0x18)
-
-/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
-
-#define S3C2410_GPB0_TOUT0   (0x02 << 0)
-
-#define S3C2410_GPB1_TOUT1   (0x02 << 2)
-
-#define S3C2410_GPB2_TOUT2   (0x02 << 4)
-
-#define S3C2410_GPB3_TOUT3   (0x02 << 6)
-
-#define S3C2410_GPB4_TCLK0   (0x02 << 8)
-#define S3C2410_GPB4_MASK    (0x03 << 8)
-
-#define S3C2410_GPB5_nXBACK  (0x02 << 10)
-#define S3C2443_GPB5_XBACK   (0x03 << 10)
-
-#define S3C2410_GPB6_nXBREQ  (0x02 << 12)
-#define S3C2443_GPB6_XBREQ   (0x03 << 12)
-
-#define S3C2410_GPB7_nXDACK1 (0x02 << 14)
-#define S3C2443_GPB7_XDACK1  (0x03 << 14)
-
-#define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
-
-#define S3C2410_GPB9_nXDACK0 (0x02 << 18)
-#define S3C2443_GPB9_XDACK0  (0x03 << 18)
-
-#define S3C2410_GPB10_nXDRE0 (0x02 << 20)
-#define S3C2443_GPB10_XDREQ0 (0x03 << 20)
-
-#define S3C2410_GPB_PUPDIS(x)  (1<<(x))
-
-/* Port C consits of 16 GPIO/Special function
- *
- * almost identical setup to port b, but the special functions are mostly
- * to do with the video system's sync/etc.
-*/
-
-#define S3C2410_GPCCON	   S3C2410_GPIOREG(0x20)
-#define S3C2410_GPCDAT	   S3C2410_GPIOREG(0x24)
-#define S3C2410_GPCUP	   S3C2410_GPIOREG(0x28)
-#define S3C2410_GPC0_LEND	(0x02 << 0)
-#define S3C2410_GPC1_VCLK	(0x02 << 2)
-#define S3C2410_GPC2_VLINE	(0x02 << 4)
-#define S3C2410_GPC3_VFRAME	(0x02 << 6)
-#define S3C2410_GPC4_VM		(0x02 << 8)
-#define S3C2410_GPC5_LCDVF0	(0x02 << 10)
-#define S3C2410_GPC6_LCDVF1	(0x02 << 12)
-#define S3C2410_GPC7_LCDVF2	(0x02 << 14)
-#define S3C2410_GPC8_VD0	(0x02 << 16)
-#define S3C2410_GPC9_VD1	(0x02 << 18)
-#define S3C2410_GPC10_VD2	(0x02 << 20)
-#define S3C2410_GPC11_VD3	(0x02 << 22)
-#define S3C2410_GPC12_VD4	(0x02 << 24)
-#define S3C2410_GPC13_VD5	(0x02 << 26)
-#define S3C2410_GPC14_VD6	(0x02 << 28)
-#define S3C2410_GPC15_VD7	(0x02 << 30)
-#define S3C2410_GPC_PUPDIS(x)  (1<<(x))
-
-/*
- * S3C2410: Port D consists of 16 GPIO/Special function
- *
- * almost identical setup to port b, but the special functions are mostly
- * to do with the video system's data.
- *
- * almost identical setup to port c
-*/
-
-#define S3C2410_GPDCON	   S3C2410_GPIOREG(0x30)
-#define S3C2410_GPDDAT	   S3C2410_GPIOREG(0x34)
-#define S3C2410_GPDUP	   S3C2410_GPIOREG(0x38)
-
-#define S3C2410_GPD0_VD8	(0x02 << 0)
-#define S3C2442_GPD0_nSPICS1	(0x03 << 0)
-
-#define S3C2410_GPD1_VD9	(0x02 << 2)
-#define S3C2442_GPD1_SPICLK1	(0x03 << 2)
-
-#define S3C2410_GPD2_VD10	(0x02 << 4)
-
-#define S3C2410_GPD3_VD11	(0x02 << 6)
-
-#define S3C2410_GPD4_VD12	(0x02 << 8)
-
-#define S3C2410_GPD5_VD13	(0x02 << 10)
-
-#define S3C2410_GPD6_VD14	(0x02 << 12)
-
-#define S3C2410_GPD7_VD15	(0x02 << 14)
-
-#define S3C2410_GPD8_VD16	(0x02 << 16)
-#define S3C2440_GPD8_SPIMISO1	(0x03 << 16)
-
-#define S3C2410_GPD9_VD17	(0x02 << 18)
-#define S3C2440_GPD9_SPIMOSI1	(0x03 << 18)
-
-#define S3C2410_GPD10_VD18	(0x02 << 20)
-#define S3C2440_GPD10_SPICLK1	(0x03 << 20)
-
-#define S3C2410_GPD11_VD19	(0x02 << 22)
-
-#define S3C2410_GPD12_VD20	(0x02 << 24)
-
-#define S3C2410_GPD13_VD21	(0x02 << 26)
-
-#define S3C2410_GPD14_VD22	(0x02 << 28)
-#define S3C2410_GPD14_nSS1	(0x03 << 28)
-
-#define S3C2410_GPD15_VD23	(0x02 << 30)
-#define S3C2410_GPD15_nSS0	(0x03 << 30)
-
-#define S3C2410_GPD_PUPDIS(x)  (1<<(x))
-
-/* S3C2410:
- * Port E consists of 16 GPIO/Special function
- *
- * again, the same as port B, but dealing with I2S, SDI, and
- * more miscellaneous functions
- *
- * GPIO / interrupt inputs
-*/
-
-#define S3C2410_GPECON	   S3C2410_GPIOREG(0x40)
-#define S3C2410_GPEDAT	   S3C2410_GPIOREG(0x44)
-#define S3C2410_GPEUP	   S3C2410_GPIOREG(0x48)
-
-#define S3C2410_GPE0_I2SLRCK   (0x02 << 0)
-#define S3C2443_GPE0_AC_nRESET (0x03 << 0)
-#define S3C2410_GPE0_MASK      (0x03 << 0)
-
-#define S3C2410_GPE1_I2SSCLK   (0x02 << 2)
-#define S3C2443_GPE1_AC_SYNC   (0x03 << 2)
-#define S3C2410_GPE1_MASK      (0x03 << 2)
-
-#define S3C2410_GPE2_CDCLK     (0x02 << 4)
-#define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
-
-#define S3C2410_GPE3_I2SSDI    (0x02 << 6)
-#define S3C2443_GPE3_AC_SDI    (0x03 << 6)
-#define S3C2410_GPE3_nSS0      (0x03 << 6)
-#define S3C2410_GPE3_MASK      (0x03 << 6)
-
-#define S3C2410_GPE4_I2SSDO    (0x02 << 8)
-#define S3C2443_GPE4_AC_SDO    (0x03 << 8)
-#define S3C2410_GPE4_I2SSDI    (0x03 << 8)
-#define S3C2410_GPE4_MASK      (0x03 << 8)
-
-#define S3C2410_GPE5_SDCLK     (0x02 << 10)
-#define S3C2443_GPE5_SD1_CLK   (0x02 << 10)
-#define S3C2443_GPE5_AC_BITCLK (0x03 << 10)
-
-#define S3C2410_GPE6_SDCMD     (0x02 << 12)
-#define S3C2443_GPE6_SD1_CMD   (0x02 << 12)
-#define S3C2443_GPE6_AC_SDI    (0x03 << 12)
-
-#define S3C2410_GPE7_SDDAT0    (0x02 << 14)
-#define S3C2443_GPE5_SD1_DAT0  (0x02 << 14)
-#define S3C2443_GPE7_AC_SDO    (0x03 << 14)
-
-#define S3C2410_GPE8_SDDAT1    (0x02 << 16)
-#define S3C2443_GPE8_SD1_DAT1  (0x02 << 16)
-#define S3C2443_GPE8_AC_SYNC   (0x03 << 16)
-
-#define S3C2410_GPE9_SDDAT2    (0x02 << 18)
-#define S3C2443_GPE9_SD1_DAT2  (0x02 << 18)
-#define S3C2443_GPE9_AC_nRESET (0x03 << 18)
-
-#define S3C2410_GPE10_SDDAT3   (0x02 << 20)
-#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
-
-#define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
-
-#define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
-
-#define S3C2410_GPE13_SPICLK0  (0x02 << 26)
-
-#define S3C2410_GPE14_IICSCL   (0x02 << 28)
-#define S3C2410_GPE14_MASK     (0x03 << 28)
-
-#define S3C2410_GPE15_IICSDA   (0x02 << 30)
-#define S3C2410_GPE15_MASK     (0x03 << 30)
-
-#define S3C2440_GPE0_ACSYNC    (0x03 << 0)
-#define S3C2440_GPE1_ACBITCLK  (0x03 << 2)
-#define S3C2440_GPE2_ACRESET   (0x03 << 4)
-#define S3C2440_GPE3_ACIN      (0x03 << 6)
-#define S3C2440_GPE4_ACOUT     (0x03 << 8)
-
-#define S3C2410_GPE_PUPDIS(x)  (1<<(x))
-
-/* S3C2410:
- * Port F consists of 8 GPIO/Special function
- *
- * GPIO / interrupt inputs
- *
- * GPFCON has 2 bits for each of the input pins on port F
- *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 undefined
- *
- * pull up works like all other ports.
- *
- * GPIO/serial/misc pins
-*/
-
-#define S3C2410_GPFCON	   S3C2410_GPIOREG(0x50)
-#define S3C2410_GPFDAT	   S3C2410_GPIOREG(0x54)
-#define S3C2410_GPFUP	   S3C2410_GPIOREG(0x58)
-
-#define S3C2410_GPF0_EINT0  (0x02 << 0)
-#define S3C2410_GPF1_EINT1  (0x02 << 2)
-#define S3C2410_GPF2_EINT2  (0x02 << 4)
-#define S3C2410_GPF3_EINT3  (0x02 << 6)
-#define S3C2410_GPF4_EINT4  (0x02 << 8)
-#define S3C2410_GPF5_EINT5  (0x02 << 10)
-#define S3C2410_GPF6_EINT6  (0x02 << 12)
-#define S3C2410_GPF7_EINT7  (0x02 << 14)
-#define S3C2410_GPF_PUPDIS(x)  (1<<(x))
-
-/* S3C2410:
- * Port G consists of 8 GPIO/IRQ/Special function
- *
- * GPGCON has 2 bits for each of the input pins on port G
- *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
- *
- * pull up works like all other ports.
-*/
-
-#define S3C2410_GPGCON	   S3C2410_GPIOREG(0x60)
-#define S3C2410_GPGDAT	   S3C2410_GPIOREG(0x64)
-#define S3C2410_GPGUP	   S3C2410_GPIOREG(0x68)
-
-#define S3C2410_GPG0_EINT8    (0x02 << 0)
-
-#define S3C2410_GPG1_EINT9    (0x02 << 2)
-
-#define S3C2410_GPG2_EINT10   (0x02 << 4)
-#define S3C2410_GPG2_nSS0     (0x03 << 4)
-
-#define S3C2410_GPG3_EINT11   (0x02 << 6)
-#define S3C2410_GPG3_nSS1     (0x03 << 6)
-
-#define S3C2410_GPG4_EINT12   (0x02 << 8)
-#define S3C2410_GPG4_LCDPWREN (0x03 << 8)
-#define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
-
-#define S3C2410_GPG5_EINT13   (0x02 << 10)
-#define S3C2410_GPG5_SPIMISO1 (0x03 << 10)	/* not s3c2443 */
-
-#define S3C2410_GPG6_EINT14   (0x02 << 12)
-#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
-
-#define S3C2410_GPG7_EINT15   (0x02 << 14)
-#define S3C2410_GPG7_SPICLK1  (0x03 << 14)
-
-#define S3C2410_GPG8_EINT16   (0x02 << 16)
-
-#define S3C2410_GPG9_EINT17   (0x02 << 18)
-
-#define S3C2410_GPG10_EINT18  (0x02 << 20)
-
-#define S3C2410_GPG11_EINT19  (0x02 << 22)
-#define S3C2410_GPG11_TCLK1   (0x03 << 22)
-#define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
-
-#define S3C2410_GPG12_EINT20  (0x02 << 24)
-#define S3C2410_GPG12_XMON    (0x03 << 24)
-#define S3C2442_GPG12_nSPICS0 (0x03 << 24)
-#define S3C2443_GPG12_nINPACK (0x03 << 24)
-
-#define S3C2410_GPG13_EINT21  (0x02 << 26)
-#define S3C2410_GPG13_nXPON   (0x03 << 26)
-#define S3C2443_GPG13_CF_nREG (0x03 << 26)
-
-#define S3C2410_GPG14_EINT22  (0x02 << 28)
-#define S3C2410_GPG14_YMON    (0x03 << 28)
-#define S3C2443_GPG14_CF_RESET (0x03 << 28)
-
-#define S3C2410_GPG15_EINT23  (0x02 << 30)
-#define S3C2410_GPG15_nYPON   (0x03 << 30)
-#define S3C2443_GPG15_CF_PWR  (0x03 << 30)
-
-#define S3C2410_GPG_PUPDIS(x)  (1<<(x))
-
-/* Port H consists of11 GPIO/serial/Misc pins
- *
- * GPHCON has 2 bits for each of the input pins on port H
- *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
- *
- * pull up works like all other ports.
-*/
-
-#define S3C2410_GPHCON	   S3C2410_GPIOREG(0x70)
-#define S3C2410_GPHDAT	   S3C2410_GPIOREG(0x74)
-#define S3C2410_GPHUP	   S3C2410_GPIOREG(0x78)
-
-#define S3C2410_GPH0_nCTS0  (0x02 << 0)
-#define S3C2416_GPH0_TXD0  (0x02 << 0)
-
-#define S3C2410_GPH1_nRTS0  (0x02 << 2)
-#define S3C2416_GPH1_RXD0  (0x02 << 2)
-
-#define S3C2410_GPH2_TXD0   (0x02 << 4)
-#define S3C2416_GPH2_TXD1   (0x02 << 4)
-
-#define S3C2410_GPH3_RXD0   (0x02 << 6)
-#define S3C2416_GPH3_RXD1   (0x02 << 6)
-
-#define S3C2410_GPH4_TXD1   (0x02 << 8)
-#define S3C2416_GPH4_TXD2   (0x02 << 8)
-
-#define S3C2410_GPH5_RXD1   (0x02 << 10)
-#define S3C2416_GPH5_RXD2   (0x02 << 10)
-
-#define S3C2410_GPH6_TXD2   (0x02 << 12)
-#define S3C2416_GPH6_TXD3   (0x02 << 12)
-#define S3C2410_GPH6_nRTS1  (0x03 << 12)
-#define S3C2416_GPH6_nRTS2  (0x03 << 12)
-
-#define S3C2410_GPH7_RXD2   (0x02 << 14)
-#define S3C2416_GPH7_RXD3   (0x02 << 14)
-#define S3C2410_GPH7_nCTS1  (0x03 << 14)
-#define S3C2416_GPH7_nCTS2  (0x03 << 14)
-
-#define S3C2410_GPH8_UCLK   (0x02 << 16)
-#define S3C2416_GPH8_nCTS0  (0x02 << 16)
-
-#define S3C2410_GPH9_CLKOUT0  (0x02 << 18)
-#define S3C2442_GPH9_nSPICS0  (0x03 << 18)
-#define S3C2416_GPH9_nRTS0    (0x02 << 18)
-
-#define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
-#define S3C2416_GPH10_nCTS1   (0x02 << 20)
-
-#define S3C2416_GPH11_nRTS1   (0x02 << 22)
-
-#define S3C2416_GPH12_EXTUARTCLK (0x02 << 24)
-
-#define S3C2416_GPH13_CLKOUT0 (0x02 << 26)
-
-#define S3C2416_GPH14_CLKOUT1 (0x02 << 28)
-
-/* The S3C2412 and S3C2413 move the GPJ register set to after
- * GPH, which means all registers after 0x80 are now offset by 0x10
- * for the 2412/2413 from the 2410/2440/2442
-*/
-
-/*
- * Port J consists of 13 GPIO/Camera pins. GPJCON has 2 bits
- * for each of the pins on port J.
- *   00 - input, 01 output, 10 - camera
- *
- * Pull up works like all other ports.
- */
-
-#define S3C2413_GPJCON	   S3C2410_GPIOREG(0x80)
-#define S3C2413_GPJDAT	   S3C2410_GPIOREG(0x84)
-#define S3C2413_GPJUP	   S3C2410_GPIOREG(0x88)
-#define S3C2413_GPJSLPCON  S3C2410_GPIOREG(0x8C)
-
-/* S3C2443 and above */
-#define S3C2440_GPJCON	   S3C2410_GPIOREG(0xD0)
-#define S3C2440_GPJDAT	   S3C2410_GPIOREG(0xD4)
-#define S3C2440_GPJUP	   S3C2410_GPIOREG(0xD8)
-
-#define S3C2443_GPKCON	   S3C2410_GPIOREG(0xE0)
-#define S3C2443_GPKDAT	   S3C2410_GPIOREG(0xE4)
-#define S3C2443_GPKUP	   S3C2410_GPIOREG(0xE8)
-
-#define S3C2443_GPLCON	   S3C2410_GPIOREG(0xF0)
-#define S3C2443_GPLDAT	   S3C2410_GPIOREG(0xF4)
-#define S3C2443_GPLUP	   S3C2410_GPIOREG(0xF8)
-
-#define S3C2443_GPMCON	   S3C2410_GPIOREG(0x100)
-#define S3C2443_GPMDAT	   S3C2410_GPIOREG(0x104)
-#define S3C2443_GPMUP	   S3C2410_GPIOREG(0x108)
-
-/* miscellaneous control */
-#define S3C2410_MISCCR	   S3C2410_GPIOREG(0x80)
-
-/* see clock.h for dclk definitions */
-
-/* pullup control on databus */
-#define S3C2410_MISCCR_SPUCR_HEN    (0<<0)
-#define S3C2410_MISCCR_SPUCR_HDIS   (1<<0)
-#define S3C2410_MISCCR_SPUCR_LEN    (0<<1)
-#define S3C2410_MISCCR_SPUCR_LDIS   (1<<1)
-
-#define S3C2410_MISCCR_USBDEV	    (0<<3)
-#define S3C2410_MISCCR_USBHOST	    (1<<3)
-
-#define S3C2410_MISCCR_CLK0_MPLL    (0<<4)
-#define S3C2410_MISCCR_CLK0_UPLL    (1<<4)
-#define S3C2410_MISCCR_CLK0_FCLK    (2<<4)
-#define S3C2410_MISCCR_CLK0_HCLK    (3<<4)
-#define S3C2410_MISCCR_CLK0_PCLK    (4<<4)
-#define S3C2410_MISCCR_CLK0_DCLK0   (5<<4)
-#define S3C2410_MISCCR_CLK0_MASK    (7<<4)
-
-#define S3C2412_MISCCR_CLK0_RTC	    (2<<4)
-
-#define S3C2410_MISCCR_CLK1_MPLL    (0<<8)
-#define S3C2410_MISCCR_CLK1_UPLL    (1<<8)
-#define S3C2410_MISCCR_CLK1_FCLK    (2<<8)
-#define S3C2410_MISCCR_CLK1_HCLK    (3<<8)
-#define S3C2410_MISCCR_CLK1_PCLK    (4<<8)
-#define S3C2410_MISCCR_CLK1_DCLK1   (5<<8)
-#define S3C2410_MISCCR_CLK1_MASK    (7<<8)
-
-#define S3C2412_MISCCR_CLK1_CLKsrc  (0<<8)
-
-#define S3C2410_MISCCR_USBSUSPND0   (1<<12)
-#define S3C2416_MISCCR_SEL_SUSPND   (1<<12)
-#define S3C2410_MISCCR_USBSUSPND1   (1<<13)
-
-#define S3C2410_MISCCR_nRSTCON	    (1<<16)
-
-#define S3C2410_MISCCR_nEN_SCLK0    (1<<17)
-#define S3C2410_MISCCR_nEN_SCLK1    (1<<18)
-#define S3C2410_MISCCR_nEN_SCLKE    (1<<19)	/* not 2412 */
-#define S3C2410_MISCCR_SDSLEEP	    (7<<17)
-
-#define S3C2416_MISCCR_FLT_I2C      (1<<24)
-#define S3C2416_MISCCR_HSSPI_EN2    (1<<31)
-
-/* external interrupt control... */
-/* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7
- * S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15
- * S3C2410_EXTINT2 -> irq sense control for EINT16..EINT23
- *
- * note S3C2410_EXTINT2 has filtering options for EINT16..EINT23
- *
- * Samsung datasheet p9-25
-*/
-#define S3C2410_EXTINT0	   S3C2410_GPIOREG(0x88)
-#define S3C2410_EXTINT1	   S3C2410_GPIOREG(0x8C)
-#define S3C2410_EXTINT2	   S3C2410_GPIOREG(0x90)
-
-#define S3C24XX_EXTINT0	   S3C24XX_GPIOREG2(0x88)
-#define S3C24XX_EXTINT1	   S3C24XX_GPIOREG2(0x8C)
-#define S3C24XX_EXTINT2	   S3C24XX_GPIOREG2(0x90)
-
-/* interrupt filtering control for EINT16..EINT23 */
-#define S3C2410_EINFLT0	   S3C2410_GPIOREG(0x94)
-#define S3C2410_EINFLT1	   S3C2410_GPIOREG(0x98)
-#define S3C2410_EINFLT2	   S3C2410_GPIOREG(0x9C)
-#define S3C2410_EINFLT3	   S3C2410_GPIOREG(0xA0)
-
-#define S3C24XX_EINFLT0	   S3C24XX_GPIOREG2(0x94)
-#define S3C24XX_EINFLT1	   S3C24XX_GPIOREG2(0x98)
-#define S3C24XX_EINFLT2	   S3C24XX_GPIOREG2(0x9C)
-#define S3C24XX_EINFLT3	   S3C24XX_GPIOREG2(0xA0)
-
-/* values for interrupt filtering */
-#define S3C2410_EINTFLT_PCLK		(0x00)
-#define S3C2410_EINTFLT_EXTCLK		(1<<7)
-#define S3C2410_EINTFLT_WIDTHMSK(x)	((x) & 0x3f)
-
-/* removed EINTxxxx defs from here, not meant for this */
-
-/* GSTATUS have miscellaneous information in them
- *
- * These move between s3c2410 and s3c2412 style systems.
- */
-
-#define S3C2410_GSTATUS0   S3C2410_GPIOREG(0x0AC)
-#define S3C2410_GSTATUS1   S3C2410_GPIOREG(0x0B0)
-#define S3C2410_GSTATUS2   S3C2410_GPIOREG(0x0B4)
-#define S3C2410_GSTATUS3   S3C2410_GPIOREG(0x0B8)
-#define S3C2410_GSTATUS4   S3C2410_GPIOREG(0x0BC)
-
-#define S3C2412_GSTATUS0   S3C2410_GPIOREG(0x0BC)
-#define S3C2412_GSTATUS1   S3C2410_GPIOREG(0x0C0)
-#define S3C2412_GSTATUS2   S3C2410_GPIOREG(0x0C4)
-#define S3C2412_GSTATUS3   S3C2410_GPIOREG(0x0C8)
-#define S3C2412_GSTATUS4   S3C2410_GPIOREG(0x0CC)
-
-#define S3C24XX_GSTATUS0   S3C24XX_GPIOREG2(0x0AC)
-#define S3C24XX_GSTATUS1   S3C24XX_GPIOREG2(0x0B0)
-#define S3C24XX_GSTATUS2   S3C24XX_GPIOREG2(0x0B4)
-#define S3C24XX_GSTATUS3   S3C24XX_GPIOREG2(0x0B8)
-#define S3C24XX_GSTATUS4   S3C24XX_GPIOREG2(0x0BC)
-
-#define S3C2410_GSTATUS0_nWAIT	   (1<<3)
-#define S3C2410_GSTATUS0_NCON	   (1<<2)
-#define S3C2410_GSTATUS0_RnB	   (1<<1)
-#define S3C2410_GSTATUS0_nBATTFLT  (1<<0)
-
-#define S3C2410_GSTATUS1_IDMASK	   (0xffff0000)
-#define S3C2410_GSTATUS1_2410	   (0x32410000)
-#define S3C2410_GSTATUS1_2412	   (0x32412001)
-#define S3C2410_GSTATUS1_2416	   (0x32416003)
-#define S3C2410_GSTATUS1_2440	   (0x32440000)
-#define S3C2410_GSTATUS1_2442	   (0x32440aaa)
-/* some 2416 CPUs report this value also */
-#define S3C2410_GSTATUS1_2450	   (0x32450003)
-
-#define S3C2410_GSTATUS2_WTRESET   (1<<2)
-#define S3C2410_GSTATUS2_OFFRESET  (1<<1)
-#define S3C2410_GSTATUS2_PONRESET  (1<<0)
-
-/* 2412/2413 sleep configuration registers */
-
-#define S3C2412_GPBSLPCON	S3C2410_GPIOREG(0x1C)
-#define S3C2412_GPCSLPCON	S3C2410_GPIOREG(0x2C)
-#define S3C2412_GPDSLPCON	S3C2410_GPIOREG(0x3C)
-#define S3C2412_GPFSLPCON	S3C2410_GPIOREG(0x5C)
-#define S3C2412_GPGSLPCON	S3C2410_GPIOREG(0x6C)
-#define S3C2412_GPHSLPCON	S3C2410_GPIOREG(0x7C)
-
-/* definitions for each pin bit */
-#define S3C2412_GPIO_SLPCON_LOW	 ( 0x00 )
-#define S3C2412_GPIO_SLPCON_HIGH ( 0x01 )
-#define S3C2412_GPIO_SLPCON_IN   ( 0x02 )
-#define S3C2412_GPIO_SLPCON_PULL ( 0x03 )
-
-#define S3C2412_SLPCON_LOW(x)	( 0x00 << ((x) * 2))
-#define S3C2412_SLPCON_HIGH(x)	( 0x01 << ((x) * 2))
-#define S3C2412_SLPCON_IN(x)	( 0x02 << ((x) * 2))
-#define S3C2412_SLPCON_PULL(x)	( 0x03 << ((x) * 2))
-#define S3C2412_SLPCON_EINT(x)	( 0x02 << ((x) * 2))  /* only IRQ pins */
-#define S3C2412_SLPCON_MASK(x)	( 0x03 << ((x) * 2))
-
-#define S3C2412_SLPCON_ALL_LOW	(0x0)
-#define S3C2412_SLPCON_ALL_HIGH	(0x11111111 | 0x44444444)
-#define S3C2412_SLPCON_ALL_IN  	(0x22222222 | 0x88888888)
-#define S3C2412_SLPCON_ALL_PULL	(0x33333333)
-
-#endif	/* __ASM_ARCH_REGS_GPIO_H */
-
diff --git a/arch/arm/mach-s3c/regs-gpio.h b/arch/arm/mach-s3c/regs-gpio.h
index 0d41cb76d440..4e08e8609663 100644
--- a/arch/arm/mach-s3c/regs-gpio.h
+++ b/arch/arm/mach-s3c/regs-gpio.h
@@ -1,9 +1,2 @@
 /* SPDX-License-Identifier: GPL-2.0 */
-
-#ifdef CONFIG_ARCH_S3C24XX
-#include "regs-gpio-s3c24xx.h"
-#endif
-
-#ifdef CONFIG_ARCH_S3C64XX
 #include "regs-gpio-s3c64xx.h"
-#endif
diff --git a/arch/arm/mach-s3c/regs-irq-s3c24xx.h b/arch/arm/mach-s3c/regs-irq-s3c24xx.h
deleted file mode 100644
index c0b97b203415..000000000000
--- a/arch/arm/mach-s3c/regs-irq-s3c24xx.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- */
-
-
-#ifndef ___ASM_ARCH_REGS_IRQ_H
-#define ___ASM_ARCH_REGS_IRQ_H
-
-#include "map-s3c.h"
-
-/* interrupt controller */
-
-#define S3C2410_IRQREG(x)   ((x) + S3C24XX_VA_IRQ)
-#define S3C2410_EINTREG(x)  ((x) + S3C24XX_VA_GPIO)
-#define S3C24XX_EINTREG(x)  ((x) + S3C24XX_VA_GPIO2)
-
-#define S3C2410_SRCPND	       S3C2410_IRQREG(0x000)
-#define S3C2410_INTMOD	       S3C2410_IRQREG(0x004)
-#define S3C2410_INTMSK	       S3C2410_IRQREG(0x008)
-#define S3C2410_PRIORITY       S3C2410_IRQREG(0x00C)
-#define S3C2410_INTPND	       S3C2410_IRQREG(0x010)
-#define S3C2410_INTOFFSET      S3C2410_IRQREG(0x014)
-#define S3C2410_SUBSRCPND      S3C2410_IRQREG(0x018)
-#define S3C2410_INTSUBMSK      S3C2410_IRQREG(0x01C)
-
-#define S3C2416_PRIORITY_MODE1		S3C2410_IRQREG(0x030)
-#define S3C2416_PRIORITY_UPDATE1	S3C2410_IRQREG(0x034)
-#define S3C2416_SRCPND2			S3C2410_IRQREG(0x040)
-#define S3C2416_INTMOD2			S3C2410_IRQREG(0x044)
-#define S3C2416_INTMSK2			S3C2410_IRQREG(0x048)
-#define S3C2416_INTPND2			S3C2410_IRQREG(0x050)
-#define S3C2416_INTOFFSET2		S3C2410_IRQREG(0x054)
-#define S3C2416_PRIORITY_MODE2		S3C2410_IRQREG(0x070)
-#define S3C2416_PRIORITY_UPDATE2	S3C2410_IRQREG(0x074)
-
-/* mask: 0=enable, 1=disable
- * 1 bit EINT, 4=EINT4, 23=EINT23
- * EINT0,1,2,3 are not handled here.
-*/
-
-#define S3C2410_EINTMASK       S3C2410_EINTREG(0x0A4)
-#define S3C2410_EINTPEND       S3C2410_EINTREG(0X0A8)
-#define S3C2412_EINTMASK       S3C2410_EINTREG(0x0B4)
-#define S3C2412_EINTPEND       S3C2410_EINTREG(0X0B8)
-
-#define S3C24XX_EINTMASK       S3C24XX_EINTREG(0x0A4)
-#define S3C24XX_EINTPEND       S3C24XX_EINTREG(0X0A8)
-
-#endif /* ___ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s3c/regs-irq.h b/arch/arm/mach-s3c/regs-irq.h
index 57f0dda8dbf5..4243daa54bd1 100644
--- a/arch/arm/mach-s3c/regs-irq.h
+++ b/arch/arm/mach-s3c/regs-irq.h
@@ -1,9 +1,2 @@
 /* SPDX-License-Identifier: GPL-2.0 */
-
-#ifdef CONFIG_ARCH_S3C24XX
-#include "regs-irq-s3c24xx.h"
-#endif
-
-#ifdef CONFIG_ARCH_S3C64XX
 #include "regs-irq-s3c64xx.h"
-#endif
diff --git a/arch/arm/mach-s3c/regs-mem-s3c24xx.h b/arch/arm/mach-s3c/regs-mem-s3c24xx.h
deleted file mode 100644
index 8fed34a1672a..000000000000
--- a/arch/arm/mach-s3c/regs-mem-s3c24xx.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *		http://www.simtec.co.uk/products/SWLINUX/
- *
- * S3C2410 Memory Control register definitions
- */
-
-#ifndef __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H
-#define __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H __FILE__
-
-#include "map-s3c.h"
-
-#define S3C2410_MEMREG(x)		(S3C24XX_VA_MEMCTRL + (x))
-
-#define S3C2410_BWSCON			S3C2410_MEMREG(0x00)
-#define S3C2410_BANKCON0		S3C2410_MEMREG(0x04)
-#define S3C2410_BANKCON1		S3C2410_MEMREG(0x08)
-#define S3C2410_BANKCON2		S3C2410_MEMREG(0x0C)
-#define S3C2410_BANKCON3		S3C2410_MEMREG(0x10)
-#define S3C2410_BANKCON4		S3C2410_MEMREG(0x14)
-#define S3C2410_BANKCON5		S3C2410_MEMREG(0x18)
-#define S3C2410_BANKCON6		S3C2410_MEMREG(0x1C)
-#define S3C2410_BANKCON7		S3C2410_MEMREG(0x20)
-#define S3C2410_REFRESH			S3C2410_MEMREG(0x24)
-#define S3C2410_BANKSIZE		S3C2410_MEMREG(0x28)
-
-#define S3C2410_BWSCON_ST1		(1 << 7)
-#define S3C2410_BWSCON_ST2		(1 << 11)
-#define S3C2410_BWSCON_ST3		(1 << 15)
-#define S3C2410_BWSCON_ST4		(1 << 19)
-#define S3C2410_BWSCON_ST5		(1 << 23)
-
-#define S3C2410_BWSCON_GET(_bwscon, _bank) (((_bwscon) >> ((_bank) * 4)) & 0xf)
-
-#define S3C2410_BWSCON_WS		(1 << 2)
-
-#define S3C2410_BANKCON_PMC16		(0x3)
-
-#define S3C2410_BANKCON_Tacp_SHIFT	(2)
-#define S3C2410_BANKCON_Tcah_SHIFT	(4)
-#define S3C2410_BANKCON_Tcoh_SHIFT	(6)
-#define S3C2410_BANKCON_Tacc_SHIFT	(8)
-#define S3C2410_BANKCON_Tcos_SHIFT	(11)
-#define S3C2410_BANKCON_Tacs_SHIFT	(13)
-
-#define S3C2410_BANKCON_SDRAM		(0x3 << 15)
-
-#define S3C2410_REFRESH_SELF		(1 << 22)
-
-#define S3C2410_BANKSIZE_MASK		(0x7 << 0)
-
-#endif /* __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H */
diff --git a/arch/arm/mach-s3c/regs-s3c2443-clock.h b/arch/arm/mach-s3c/regs-s3c2443-clock.h
deleted file mode 100644
index b3b670d463db..000000000000
--- a/arch/arm/mach-s3c/regs-s3c2443-clock.h
+++ /dev/null
@@ -1,238 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2007 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C2443 clock register definitions
- */
-
-#ifndef __ASM_ARM_REGS_S3C2443_CLOCK
-#define __ASM_ARM_REGS_S3C2443_CLOCK
-
-#include <linux/delay.h>
-#include "map-s3c.h"
-
-#define S3C2443_CLKREG(x)		((x) + S3C24XX_VA_CLKPWR)
-
-#define S3C2443_PLLCON_MDIVSHIFT	16
-#define S3C2443_PLLCON_PDIVSHIFT	8
-#define S3C2443_PLLCON_SDIVSHIFT	0
-#define S3C2443_PLLCON_MDIVMASK		((1<<(1+(23-16)))-1)
-#define S3C2443_PLLCON_PDIVMASK		((1<<(1+(9-8)))-1)
-#define S3C2443_PLLCON_SDIVMASK		(3)
-
-#define S3C2443_MPLLCON			S3C2443_CLKREG(0x10)
-#define S3C2443_EPLLCON			S3C2443_CLKREG(0x18)
-#define S3C2443_CLKSRC			S3C2443_CLKREG(0x20)
-#define S3C2443_CLKDIV0			S3C2443_CLKREG(0x24)
-#define S3C2443_CLKDIV1			S3C2443_CLKREG(0x28)
-#define S3C2443_HCLKCON			S3C2443_CLKREG(0x30)
-#define S3C2443_PCLKCON			S3C2443_CLKREG(0x34)
-#define S3C2443_SCLKCON			S3C2443_CLKREG(0x38)
-#define S3C2443_PWRMODE			S3C2443_CLKREG(0x40)
-#define S3C2443_SWRST			S3C2443_CLKREG(0x44)
-#define S3C2443_BUSPRI0			S3C2443_CLKREG(0x50)
-#define S3C2443_SYSID			S3C2443_CLKREG(0x5C)
-#define S3C2443_PWRCFG			S3C2443_CLKREG(0x60)
-#define S3C2443_RSTCON			S3C2443_CLKREG(0x64)
-#define S3C2443_PHYCTRL			S3C2443_CLKREG(0x80)
-#define S3C2443_PHYPWR			S3C2443_CLKREG(0x84)
-#define S3C2443_URSTCON			S3C2443_CLKREG(0x88)
-#define S3C2443_UCLKCON			S3C2443_CLKREG(0x8C)
-
-#define S3C2443_PLLCON_OFF		(1<<24)
-
-#define S3C2443_CLKSRC_EPLLREF_XTAL	(2<<7)
-#define S3C2443_CLKSRC_EPLLREF_EXTCLK	(3<<7)
-#define S3C2443_CLKSRC_EPLLREF_MPLLREF	(0<<7)
-#define S3C2443_CLKSRC_EPLLREF_MPLLREF2	(1<<7)
-#define S3C2443_CLKSRC_EPLLREF_MASK	(3<<7)
-
-#define S3C2443_CLKSRC_EXTCLK_DIV	(1<<3)
-
-#define S3C2443_CLKDIV0_HALF_HCLK	(1<<3)
-#define S3C2443_CLKDIV0_HALF_PCLK	(1<<2)
-
-#define S3C2443_CLKDIV0_HCLKDIV_MASK	(3<<0)
-
-#define S3C2443_CLKDIV0_EXTDIV_MASK	(3<<6)
-#define S3C2443_CLKDIV0_EXTDIV_SHIFT	(6)
-
-#define S3C2443_CLKDIV0_PREDIV_MASK	(3<<4)
-#define S3C2443_CLKDIV0_PREDIV_SHIFT	(4)
-
-#define S3C2416_CLKDIV0_ARMDIV_MASK	(7 << 9)
-#define S3C2443_CLKDIV0_ARMDIV_MASK	(15<<9)
-#define S3C2443_CLKDIV0_ARMDIV_SHIFT	(9)
-#define S3C2443_CLKDIV0_ARMDIV_1	(0<<9)
-#define S3C2443_CLKDIV0_ARMDIV_2	(8<<9)
-#define S3C2443_CLKDIV0_ARMDIV_3	(2<<9)
-#define S3C2443_CLKDIV0_ARMDIV_4	(9<<9)
-#define S3C2443_CLKDIV0_ARMDIV_6	(10<<9)
-#define S3C2443_CLKDIV0_ARMDIV_8	(11<<9)
-#define S3C2443_CLKDIV0_ARMDIV_12	(13<<9)
-#define S3C2443_CLKDIV0_ARMDIV_16	(15<<9)
-
-/* S3C2443_CLKDIV1 removed, only used in clock.c code */
-
-#define S3C2443_CLKCON_NAND
-
-#define S3C2443_HCLKCON_DMA0		(1<<0)
-#define S3C2443_HCLKCON_DMA1		(1<<1)
-#define S3C2443_HCLKCON_DMA2		(1<<2)
-#define S3C2443_HCLKCON_DMA3		(1<<3)
-#define S3C2443_HCLKCON_DMA4		(1<<4)
-#define S3C2443_HCLKCON_DMA5		(1<<5)
-#define S3C2443_HCLKCON_CAMIF		(1<<8)
-#define S3C2443_HCLKCON_LCDC		(1<<9)
-#define S3C2443_HCLKCON_USBH		(1<<11)
-#define S3C2443_HCLKCON_USBD		(1<<12)
-#define S3C2416_HCLKCON_HSMMC0		(1<<15)
-#define S3C2443_HCLKCON_HSMMC		(1<<16)
-#define S3C2443_HCLKCON_CFC		(1<<17)
-#define S3C2443_HCLKCON_SSMC		(1<<18)
-#define S3C2443_HCLKCON_DRAMC		(1<<19)
-
-#define S3C2443_PCLKCON_UART0		(1<<0)
-#define S3C2443_PCLKCON_UART1		(1<<1)
-#define S3C2443_PCLKCON_UART2		(1<<2)
-#define S3C2443_PCLKCON_UART3		(1<<3)
-#define S3C2443_PCLKCON_IIC		(1<<4)
-#define S3C2443_PCLKCON_SDI		(1<<5)
-#define S3C2443_PCLKCON_HSSPI		(1<<6)
-#define S3C2443_PCLKCON_ADC		(1<<7)
-#define S3C2443_PCLKCON_AC97		(1<<8)
-#define S3C2443_PCLKCON_IIS		(1<<9)
-#define S3C2443_PCLKCON_PWMT		(1<<10)
-#define S3C2443_PCLKCON_WDT		(1<<11)
-#define S3C2443_PCLKCON_RTC		(1<<12)
-#define S3C2443_PCLKCON_GPIO		(1<<13)
-#define S3C2443_PCLKCON_SPI0		(1<<14)
-#define S3C2443_PCLKCON_SPI1		(1<<15)
-
-#define S3C2443_SCLKCON_DDRCLK		(1<<16)
-#define S3C2443_SCLKCON_SSMCCLK		(1<<15)
-#define S3C2443_SCLKCON_HSSPICLK	(1<<14)
-#define S3C2443_SCLKCON_HSMMCCLK_EXT	(1<<13)
-#define S3C2443_SCLKCON_HSMMCCLK_EPLL	(1<<12)
-#define S3C2443_SCLKCON_CAMCLK		(1<<11)
-#define S3C2443_SCLKCON_DISPCLK		(1<<10)
-#define S3C2443_SCLKCON_I2SCLK		(1<<9)
-#define S3C2443_SCLKCON_UARTCLK		(1<<8)
-#define S3C2443_SCLKCON_USBHOST		(1<<1)
-
-#define S3C2443_PWRCFG_SLEEP		(1<<15)
-
-#define S3C2443_PWRCFG_USBPHY		(1 << 4)
-
-#define S3C2443_URSTCON_FUNCRST		(1 << 2)
-#define S3C2443_URSTCON_PHYRST		(1 << 0)
-
-#define S3C2443_PHYCTRL_CLKSEL		(1 << 3)
-#define S3C2443_PHYCTRL_EXTCLK		(1 << 2)
-#define S3C2443_PHYCTRL_PLLSEL		(1 << 1)
-#define S3C2443_PHYCTRL_DSPORT		(1 << 0)
-
-#define S3C2443_PHYPWR_COMMON_ON	(1 << 31)
-#define S3C2443_PHYPWR_ANALOG_PD	(1 << 4)
-#define S3C2443_PHYPWR_PLL_REFCLK	(1 << 3)
-#define S3C2443_PHYPWR_XO_ON		(1 << 2)
-#define S3C2443_PHYPWR_PLL_PWRDN	(1 << 1)
-#define S3C2443_PHYPWR_FSUSPEND		(1 << 0)
-
-#define S3C2443_UCLKCON_DETECT_VBUS	(1 << 31)
-#define S3C2443_UCLKCON_FUNC_CLKEN	(1 << 2)
-#define S3C2443_UCLKCON_TCLKEN		(1 << 0)
-
-#include <asm/div64.h>
-
-static inline unsigned int
-s3c2443_get_mpll(unsigned int pllval, unsigned int baseclk)
-{
-	unsigned int mdiv, pdiv, sdiv;
-	uint64_t fvco;
-
-	mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
-	pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
-	sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
-
-	mdiv &= S3C2443_PLLCON_MDIVMASK;
-	pdiv &= S3C2443_PLLCON_PDIVMASK;
-	sdiv &= S3C2443_PLLCON_SDIVMASK;
-
-	fvco = (uint64_t)baseclk * (2 * (mdiv + 8));
-	do_div(fvco, pdiv << sdiv);
-
-	return (unsigned int)fvco;
-}
-
-static inline unsigned int
-s3c2443_get_epll(unsigned int pllval, unsigned int baseclk)
-{
-	unsigned int mdiv, pdiv, sdiv;
-	uint64_t fvco;
-
-	mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
-	pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
-	sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
-
-	mdiv &= S3C2443_PLLCON_MDIVMASK;
-	pdiv &= S3C2443_PLLCON_PDIVMASK;
-	sdiv &= S3C2443_PLLCON_SDIVMASK;
-
-	fvco = (uint64_t)baseclk * (mdiv + 8);
-	do_div(fvco, (pdiv + 2) << sdiv);
-
-	return (unsigned int)fvco;
-}
-
-static inline void s3c_hsudc_init_phy(void)
-{
-	u32 cfg;
-
-	cfg = readl(S3C2443_PWRCFG) | S3C2443_PWRCFG_USBPHY;
-	writel(cfg, S3C2443_PWRCFG);
-
-	cfg = readl(S3C2443_URSTCON);
-	cfg |= (S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
-	writel(cfg, S3C2443_URSTCON);
-	mdelay(1);
-
-	cfg = readl(S3C2443_URSTCON);
-	cfg &= ~(S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
-	writel(cfg, S3C2443_URSTCON);
-
-	cfg = readl(S3C2443_PHYCTRL);
-	cfg &= ~(S3C2443_PHYCTRL_CLKSEL | S3C2443_PHYCTRL_DSPORT);
-	cfg |= (S3C2443_PHYCTRL_EXTCLK | S3C2443_PHYCTRL_PLLSEL);
-	writel(cfg, S3C2443_PHYCTRL);
-
-	cfg = readl(S3C2443_PHYPWR);
-	cfg &= ~(S3C2443_PHYPWR_FSUSPEND | S3C2443_PHYPWR_PLL_PWRDN |
-		S3C2443_PHYPWR_XO_ON | S3C2443_PHYPWR_PLL_REFCLK |
-		S3C2443_PHYPWR_ANALOG_PD);
-	cfg |= S3C2443_PHYPWR_COMMON_ON;
-	writel(cfg, S3C2443_PHYPWR);
-
-	cfg = readl(S3C2443_UCLKCON);
-	cfg |= (S3C2443_UCLKCON_DETECT_VBUS | S3C2443_UCLKCON_FUNC_CLKEN |
-		S3C2443_UCLKCON_TCLKEN);
-	writel(cfg, S3C2443_UCLKCON);
-}
-
-static inline void s3c_hsudc_uninit_phy(void)
-{
-	u32 cfg;
-
-	cfg = readl(S3C2443_PWRCFG) & ~S3C2443_PWRCFG_USBPHY;
-	writel(cfg, S3C2443_PWRCFG);
-
-	writel(S3C2443_PHYPWR_FSUSPEND, S3C2443_PHYPWR);
-
-	cfg = readl(S3C2443_UCLKCON) & ~S3C2443_UCLKCON_FUNC_CLKEN;
-	writel(cfg, S3C2443_UCLKCON);
-}
-
-#endif /*  __ASM_ARM_REGS_S3C2443_CLOCK */
-
diff --git a/arch/arm/mach-s3c/regs-srom-s3c64xx.h b/arch/arm/mach-s3c/regs-srom-s3c64xx.h
deleted file mode 100644
index 2b37988bdf94..000000000000
--- a/arch/arm/mach-s3c/regs-srom-s3c64xx.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright 2009 Andy Green <andy@warmcat.com>
- *
- * S3C64XX SROM definitions
- */
-
-#ifndef __MACH_S3C64XX_REGS_SROM_H
-#define __MACH_S3C64XX_REGS_SROM_H __FILE__
-
-#define S3C64XX_SROMREG(x)	(S3C_VA_MEM + (x))
-
-#define S3C64XX_SROM_BW		S3C64XX_SROMREG(0)
-#define S3C64XX_SROM_BC0	S3C64XX_SROMREG(4)
-#define S3C64XX_SROM_BC1	S3C64XX_SROMREG(8)
-#define S3C64XX_SROM_BC2	S3C64XX_SROMREG(0xc)
-#define S3C64XX_SROM_BC3	S3C64XX_SROMREG(0x10)
-#define S3C64XX_SROM_BC4	S3C64XX_SROMREG(0x14)
-#define S3C64XX_SROM_BC5	S3C64XX_SROMREG(0x18)
-
-/*
- * one register BW holds 5 x 4-bit packed settings for NCS0 - NCS4
- */
-
-#define S3C64XX_SROM_BW__DATAWIDTH__SHIFT	0
-#define S3C64XX_SROM_BW__WAITENABLE__SHIFT	2
-#define S3C64XX_SROM_BW__BYTEENABLE__SHIFT	3
-#define S3C64XX_SROM_BW__CS_MASK		0xf
-
-#define S3C64XX_SROM_BW__NCS0__SHIFT	0
-#define S3C64XX_SROM_BW__NCS1__SHIFT	4
-#define S3C64XX_SROM_BW__NCS2__SHIFT	8
-#define S3C64XX_SROM_BW__NCS3__SHIFT	0xc
-#define S3C64XX_SROM_BW__NCS4__SHIFT	0x10
-
-/*
- * applies to same to BCS0 - BCS4
- */
-
-#define S3C64XX_SROM_BCX__PMC__SHIFT	0
-#define S3C64XX_SROM_BCX__PMC__MASK	3
-#define S3C64XX_SROM_BCX__TACP__SHIFT	4
-#define S3C64XX_SROM_BCX__TACP__MASK	0xf
-#define S3C64XX_SROM_BCX__TCAH__SHIFT	8
-#define S3C64XX_SROM_BCX__TCAH__MASK	0xf
-#define S3C64XX_SROM_BCX__TCOH__SHIFT	12
-#define S3C64XX_SROM_BCX__TCOH__MASK	0xf
-#define S3C64XX_SROM_BCX__TACC__SHIFT	16
-#define S3C64XX_SROM_BCX__TACC__MASK	0x1f
-#define S3C64XX_SROM_BCX__TCOS__SHIFT	24
-#define S3C64XX_SROM_BCX__TCOS__MASK	0xf
-#define S3C64XX_SROM_BCX__TACS__SHIFT	28
-#define S3C64XX_SROM_BCX__TACS__MASK	0xf
-
-#endif /* __MACH_S3C64XX_REGS_SROM_H */
diff --git a/arch/arm/mach-s3c/rtc-core-s3c24xx.h b/arch/arm/mach-s3c/rtc-core-s3c24xx.h
deleted file mode 100644
index e7258b2423fc..000000000000
--- a/arch/arm/mach-s3c/rtc-core-s3c24xx.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de>
- *
- * Samsung RTC Controller core functions
- */
-
-#ifndef __RTC_CORE_S3C24XX_H
-#define __RTC_CORE_S3C24XX_H __FILE__
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
- */
-
-extern struct platform_device s3c_device_rtc;
-
-/* re-define device name depending on support. */
-static inline void s3c_rtc_setname(char *name)
-{
-	s3c_device_rtc.name = name;
-}
-
-#endif /* __RTC_CORE_S3C24XX_H */
diff --git a/arch/arm/mach-s3c/s3c2410.c b/arch/arm/mach-s3c/s3c2410.c
deleted file mode 100644
index 4d39d9939c2f..000000000000
--- a/arch/arm/mach-s3c/s3c2410.c
+++ /dev/null
@@ -1,130 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2003-2005 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// http://www.simtec.co.uk/products/EB2410ITX/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/reboot.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "map.h"
-#include "gpio-samsung.h"
-#include <asm/irq.h>
-#include <asm/system_misc.h>
-
-
-#include "regs-clock.h"
-
-#include "cpu.h"
-#include "devs.h"
-#include "pm.h"
-
-#include "gpio-core.h"
-#include "gpio-cfg.h"
-#include "gpio-cfg-helpers.h"
-
-#include "s3c24xx.h"
-
-/* Initial IO mappings */
-
-static struct map_desc s3c2410_iodesc[] __initdata __maybe_unused = {
-	IODESC_ENT(CLKPWR),
-	IODESC_ENT(TIMER),
-	IODESC_ENT(WATCHDOG),
-};
-
-/* our uart devices */
-
-/* uart registration process */
-
-void __init s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s3c2410-uart", s3c2410_uart_resources, cfg, no);
-}
-
-/* s3c2410_map_io
- *
- * register the standard cpu IO areas, and any passed in from the
- * machine specific initialisation.
-*/
-
-void __init s3c2410_map_io(void)
-{
-	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
-	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
-
-	iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc));
-}
-
-struct bus_type s3c2410_subsys = {
-	.name = "s3c2410-core",
-	.dev_name = "s3c2410-core",
-};
-
-/* Note, we would have liked to name this s3c2410-core, but we cannot
- * register two subsystems with the same name.
- */
-struct bus_type s3c2410a_subsys = {
-	.name = "s3c2410a-core",
-	.dev_name = "s3c2410a-core",
-};
-
-static struct device s3c2410_dev = {
-	.bus		= &s3c2410_subsys,
-};
-
-/* need to register the subsystem before we actually register the device, and
- * we also need to ensure that it has been initialised before any of the
- * drivers even try to use it (even if not on an s3c2410 based system)
- * as a driver which may support both 2410 and 2440 may try and use it.
-*/
-
-static int __init s3c2410_core_init(void)
-{
-	return subsys_system_register(&s3c2410_subsys, NULL);
-}
-
-core_initcall(s3c2410_core_init);
-
-static int __init s3c2410a_core_init(void)
-{
-	return subsys_system_register(&s3c2410a_subsys, NULL);
-}
-
-core_initcall(s3c2410a_core_init);
-
-int __init s3c2410_init(void)
-{
-	printk("S3C2410: Initialising architecture\n");
-
-#ifdef CONFIG_PM_SLEEP
-	register_syscore_ops(&s3c2410_pm_syscore_ops);
-	register_syscore_ops(&s3c24xx_irq_syscore_ops);
-#endif
-
-	return device_register(&s3c2410_dev);
-}
-
-int __init s3c2410a_init(void)
-{
-	s3c2410_dev.bus = &s3c2410a_subsys;
-	return s3c2410_init();
-}
diff --git a/arch/arm/mach-s3c/s3c2412-power.h b/arch/arm/mach-s3c/s3c2412-power.h
deleted file mode 100644
index 0031cfaa1d76..000000000000
--- a/arch/arm/mach-s3c/s3c2412-power.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- */
-
-#ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H
-#define __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H __FILE__
-
-#define S3C24XX_PWRREG(x)			((x) + S3C24XX_VA_CLKPWR)
-
-#define S3C2412_PWRMODECON			S3C24XX_PWRREG(0x20)
-#define S3C2412_PWRCFG				S3C24XX_PWRREG(0x24)
-
-#define S3C2412_INFORM0				S3C24XX_PWRREG(0x70)
-#define S3C2412_INFORM1				S3C24XX_PWRREG(0x74)
-#define S3C2412_INFORM2				S3C24XX_PWRREG(0x78)
-#define S3C2412_INFORM3				S3C24XX_PWRREG(0x7C)
-
-#define S3C2412_PWRCFG_BATF_IRQ			(1 << 0)
-#define S3C2412_PWRCFG_BATF_IGNORE		(2 << 0)
-#define S3C2412_PWRCFG_BATF_SLEEP		(3 << 0)
-#define S3C2412_PWRCFG_BATF_MASK		(3 << 0)
-
-#define S3C2412_PWRCFG_STANDBYWFI_IGNORE	(0 << 6)
-#define S3C2412_PWRCFG_STANDBYWFI_IDLE		(1 << 6)
-#define S3C2412_PWRCFG_STANDBYWFI_STOP		(2 << 6)
-#define S3C2412_PWRCFG_STANDBYWFI_SLEEP		(3 << 6)
-#define S3C2412_PWRCFG_STANDBYWFI_MASK		(3 << 6)
-
-#define S3C2412_PWRCFG_RTC_MASKIRQ		(1 << 8)
-#define S3C2412_PWRCFG_NAND_NORST		(1 << 9)
-
-#endif /* __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H */
diff --git a/arch/arm/mach-s3c/s3c2412.c b/arch/arm/mach-s3c/s3c2412.c
deleted file mode 100644
index 0b1ca78c9d2a..000000000000
--- a/arch/arm/mach-s3c/s3c2412.c
+++ /dev/null
@@ -1,175 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2006 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// http://armlinux.simtec.co.uk/.
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/reboot.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/proc-fns.h>
-#include <asm/irq.h>
-#include <asm/system_misc.h>
-
-#include "map.h"
-#include "regs-clock.h"
-#include "regs-gpio.h"
-
-#include "cpu.h"
-#include "devs.h"
-#include "pm.h"
-
-#include "s3c24xx.h"
-#include "nand-core-s3c24xx.h"
-#include "regs-dsc-s3c24xx.h"
-#include "s3c2412-power.h"
-
-#ifndef CONFIG_CPU_S3C2412_ONLY
-void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
-
-static inline void s3c2412_init_gpio2(void)
-{
-	s3c24xx_va_gpio2 = S3C24XX_VA_GPIO + 0x10;
-}
-#else
-#define s3c2412_init_gpio2() do { } while(0)
-#endif
-
-/* Initial IO mappings */
-
-static struct map_desc s3c2412_iodesc[] __initdata __maybe_unused = {
-	IODESC_ENT(CLKPWR),
-	IODESC_ENT(TIMER),
-	IODESC_ENT(WATCHDOG),
-	{
-		.virtual = (unsigned long)S3C2412_VA_SSMC,
-		.pfn	 = __phys_to_pfn(S3C2412_PA_SSMC),
-		.length	 = SZ_1M,
-		.type	 = MT_DEVICE,
-	},
-	{
-		.virtual = (unsigned long)S3C2412_VA_EBI,
-		.pfn	 = __phys_to_pfn(S3C2412_PA_EBI),
-		.length	 = SZ_1M,
-		.type	 = MT_DEVICE,
-	},
-};
-
-/* uart registration process */
-
-void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s3c2412-uart", s3c2410_uart_resources, cfg, no);
-
-	/* rename devices that are s3c2412/s3c2413 specific */
-	s3c_device_sdi.name  = "s3c2412-sdi";
-	s3c_device_lcd.name  = "s3c2412-lcd";
-	s3c_nand_setname("s3c2412-nand");
-
-	/* alter IRQ of SDI controller */
-
-	s3c_device_sdi.resource[1].start = IRQ_S3C2412_SDI;
-	s3c_device_sdi.resource[1].end   = IRQ_S3C2412_SDI;
-
-	/* spi channel related changes, s3c2412/13 specific */
-	s3c_device_spi0.name = "s3c2412-spi";
-	s3c_device_spi0.resource[0].end = S3C24XX_PA_SPI + 0x24;
-	s3c_device_spi1.name = "s3c2412-spi";
-	s3c_device_spi1.resource[0].start = S3C24XX_PA_SPI + S3C2412_SPI1;
-	s3c_device_spi1.resource[0].end = S3C24XX_PA_SPI + S3C2412_SPI1 + 0x24;
-
-}
-
-/* s3c2412_idle
- *
- * use the standard idle call by ensuring the idle mode
- * in power config, then issuing the idle co-processor
- * instruction
-*/
-
-static void s3c2412_idle(void)
-{
-	unsigned long tmp;
-
-	/* ensure our idle mode is to go to idle */
-
-	tmp = __raw_readl(S3C2412_PWRCFG);
-	tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK;
-	tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE;
-	__raw_writel(tmp, S3C2412_PWRCFG);
-
-	cpu_do_idle();
-}
-
-/* s3c2412_map_io
- *
- * register the standard cpu IO areas, and any passed in from the
- * machine specific initialisation.
-*/
-
-void __init s3c2412_map_io(void)
-{
-	/* move base of IO */
-
-	s3c2412_init_gpio2();
-
-	/* set our idle function */
-
-	arm_pm_idle = s3c2412_idle;
-
-	/* register our io-tables */
-
-	iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc));
-}
-
-/* need to register the subsystem before we actually register the device, and
- * we also need to ensure that it has been initialised before any of the
- * drivers even try to use it (even if not on an s3c2412 based system)
- * as a driver which may support both 2410 and 2440 may try and use it.
-*/
-
-struct bus_type s3c2412_subsys = {
-	.name = "s3c2412-core",
-	.dev_name = "s3c2412-core",
-};
-
-static int __init s3c2412_core_init(void)
-{
-	return subsys_system_register(&s3c2412_subsys, NULL);
-}
-
-core_initcall(s3c2412_core_init);
-
-static struct device s3c2412_dev = {
-	.bus		= &s3c2412_subsys,
-};
-
-int __init s3c2412_init(void)
-{
-	printk("S3C2412: Initialising architecture\n");
-
-#ifdef CONFIG_PM_SLEEP
-	register_syscore_ops(&s3c2412_pm_syscore_ops);
-	register_syscore_ops(&s3c24xx_irq_syscore_ops);
-#endif
-
-	return device_register(&s3c2412_dev);
-}
diff --git a/arch/arm/mach-s3c/s3c2412.h b/arch/arm/mach-s3c/s3c2412.h
deleted file mode 100644
index ed09a0e13bd8..000000000000
--- a/arch/arm/mach-s3c/s3c2412.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- */
-
-#ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_H
-#define __ARCH_ARM_MACH_S3C24XX_S3C2412_H __FILE__
-
-#include "map-s3c.h"
-
-#define S3C2412_MEMREG(x)		(S3C24XX_VA_MEMCTRL + (x))
-#define S3C2412_EBIREG(x)		(S3C2412_VA_EBI + (x))
-
-#define S3C2412_SSMCREG(x)		(S3C2412_VA_SSMC + (x))
-#define S3C2412_SSMC(x, o)		(S3C2412_SSMCREG((x * 0x20) + (o)))
-
-#define S3C2412_REFRESH			S3C2412_MEMREG(0x10)
-
-#define S3C2412_EBI_BANKCFG		S3C2412_EBIREG(0x4)
-
-#define S3C2412_SSMC_BANK(x)		S3C2412_SSMC(x, 0x0)
-
-#endif /* __ARCH_ARM_MACH_S3C24XX_S3C2412_H */
diff --git a/arch/arm/mach-s3c/s3c2416.c b/arch/arm/mach-s3c/s3c2416.c
deleted file mode 100644
index 126e6ed29713..000000000000
--- a/arch/arm/mach-s3c/s3c2416.c
+++ /dev/null
@@ -1,132 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
-//	as part of OpenInkpot project
-// Copyright (c) 2009 Promwad Innovation Company
-//	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
-//
-// Samsung S3C2416 Mobile CPU support
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/reboot.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "map.h"
-#include "gpio-samsung.h"
-#include <asm/proc-fns.h>
-#include <asm/irq.h>
-#include <asm/system_misc.h>
-
-#include "regs-s3c2443-clock.h"
-#include "rtc-core-s3c24xx.h"
-
-#include "gpio-core.h"
-#include "gpio-cfg.h"
-#include "gpio-cfg-helpers.h"
-#include "devs.h"
-#include "cpu.h"
-#include "sdhci.h"
-#include "pm.h"
-
-#include "iic-core.h"
-#include "adc-core.h"
-
-#include "s3c24xx.h"
-#include "fb-core-s3c24xx.h"
-#include "nand-core-s3c24xx.h"
-#include "spi-core-s3c24xx.h"
-
-static struct map_desc s3c2416_iodesc[] __initdata __maybe_unused = {
-	IODESC_ENT(WATCHDOG),
-	IODESC_ENT(CLKPWR),
-	IODESC_ENT(TIMER),
-};
-
-struct bus_type s3c2416_subsys = {
-	.name = "s3c2416-core",
-	.dev_name = "s3c2416-core",
-};
-
-static struct device s3c2416_dev = {
-	.bus		= &s3c2416_subsys,
-};
-
-int __init s3c2416_init(void)
-{
-	printk(KERN_INFO "S3C2416: Initializing architecture\n");
-
-	/* change WDT IRQ number */
-	s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
-	s3c_device_wdt.resource[1].end   = IRQ_S3C2443_WDT;
-
-	/* the i2c devices are directly compatible with s3c2440 */
-	s3c_i2c0_setname("s3c2440-i2c");
-	s3c_i2c1_setname("s3c2440-i2c");
-
-	s3c_fb_setname("s3c2443-fb");
-
-	s3c_adc_setname("s3c2416-adc");
-	s3c_rtc_setname("s3c2416-rtc");
-
-#ifdef CONFIG_PM_SLEEP
-	register_syscore_ops(&s3c2416_pm_syscore_ops);
-	register_syscore_ops(&s3c24xx_irq_syscore_ops);
-	register_syscore_ops(&s3c2416_irq_syscore_ops);
-#endif
-
-	return device_register(&s3c2416_dev);
-}
-
-void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
-
-	s3c_nand_setname("s3c2412-nand");
-}
-
-/* s3c2416_map_io
- *
- * register the standard cpu IO areas, and any passed in from the
- * machine specific initialisation.
- */
-
-void __init s3c2416_map_io(void)
-{
-	s3c24xx_gpiocfg_default.set_pull = samsung_gpio_setpull_updown;
-	s3c24xx_gpiocfg_default.get_pull = samsung_gpio_getpull_updown;
-
-	/* initialize device information early */
-	s3c2416_default_sdhci0();
-	s3c2416_default_sdhci1();
-	s3c24xx_spi_setname("s3c2443-spi");
-
-	iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc));
-}
-
-/* need to register the subsystem before we actually register the device, and
- * we also need to ensure that it has been initialised before any of the
- * drivers even try to use it (even if not on an s3c2416 based system)
- * as a driver which may support both 2443 and 2440 may try and use it.
-*/
-
-static int __init s3c2416_core_init(void)
-{
-	return subsys_system_register(&s3c2416_subsys, NULL);
-}
-
-core_initcall(s3c2416_core_init);
diff --git a/arch/arm/mach-s3c/s3c2440.c b/arch/arm/mach-s3c/s3c2440.c
deleted file mode 100644
index c6cdee4987e8..000000000000
--- a/arch/arm/mach-s3c/s3c2440.c
+++ /dev/null
@@ -1,71 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2004-2006 Simtec Electronics
-//   Ben Dooks <ben@simtec.co.uk>
-//
-// Samsung S3C2440 Mobile CPU support
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/irq.h>
-
-#include "devs.h"
-#include "cpu.h"
-#include "pm.h"
-
-#include "gpio-core.h"
-#include "gpio-cfg.h"
-#include "gpio-cfg-helpers.h"
-#include "gpio-samsung.h"
-
-#include "s3c24xx.h"
-
-static struct device s3c2440_dev = {
-	.bus		= &s3c2440_subsys,
-};
-
-int __init s3c2440_init(void)
-{
-	printk("S3C2440: Initialising architecture\n");
-
-	/* change irq for watchdog */
-
-	s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
-	s3c_device_wdt.resource[1].end   = IRQ_S3C2440_WDT;
-
-	/* register suspend/resume handlers */
-
-#ifdef CONFIG_PM_SLEEP
-	register_syscore_ops(&s3c2410_pm_syscore_ops);
-	register_syscore_ops(&s3c24xx_irq_syscore_ops);
-	register_syscore_ops(&s3c244x_pm_syscore_ops);
-#endif
-
-	/* register our system device for everything else */
-
-	return device_register(&s3c2440_dev);
-}
-
-void __init s3c2440_map_io(void)
-{
-	s3c244x_map_io();
-
-	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
-	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
-}
diff --git a/arch/arm/mach-s3c/s3c2442.c b/arch/arm/mach-s3c/s3c2442.c
deleted file mode 100644
index 0c0e30b6688f..000000000000
--- a/arch/arm/mach-s3c/s3c2442.c
+++ /dev/null
@@ -1,62 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (c) 2004-2005 Simtec Electronics
-//	http://armlinux.simtec.co.uk/
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// S3C2442 core and lock support
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mutex.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <linux/atomic.h>
-#include <asm/irq.h>
-
-#include "regs-clock.h"
-
-#include "cpu.h"
-#include "pm.h"
-
-#include "gpio-core.h"
-#include "gpio-cfg.h"
-#include "gpio-cfg-helpers.h"
-#include "gpio-samsung.h"
-
-#include "s3c24xx.h"
-
-static struct device s3c2442_dev = {
-	.bus		= &s3c2442_subsys,
-};
-
-int __init s3c2442_init(void)
-{
-	printk("S3C2442: Initialising architecture\n");
-
-#ifdef CONFIG_PM_SLEEP
-	register_syscore_ops(&s3c2410_pm_syscore_ops);
-	register_syscore_ops(&s3c24xx_irq_syscore_ops);
-	register_syscore_ops(&s3c244x_pm_syscore_ops);
-#endif
-
-	return device_register(&s3c2442_dev);
-}
-
-void __init s3c2442_map_io(void)
-{
-	s3c244x_map_io();
-
-	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1down;
-	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1down;
-}
diff --git a/arch/arm/mach-s3c/s3c2443.c b/arch/arm/mach-s3c/s3c2443.c
deleted file mode 100644
index 05c3c298b9f8..000000000000
--- a/arch/arm/mach-s3c/s3c2443.c
+++ /dev/null
@@ -1,112 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2007 Simtec Electronics
-//   Ben Dooks <ben@simtec.co.uk>
-//
-// Samsung S3C2443 Mobile CPU support
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/reboot.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "map.h"
-#include "gpio-samsung.h"
-#include "irqs.h"
-#include <asm/irq.h>
-#include <asm/system_misc.h>
-
-#include "regs-s3c2443-clock.h"
-#include "rtc-core-s3c24xx.h"
-
-#include "gpio-core.h"
-#include "gpio-cfg.h"
-#include "gpio-cfg-helpers.h"
-#include "devs.h"
-#include "cpu.h"
-#include "adc-core.h"
-
-#include "s3c24xx.h"
-#include "fb-core-s3c24xx.h"
-#include "nand-core-s3c24xx.h"
-#include "spi-core-s3c24xx.h"
-
-static struct map_desc s3c2443_iodesc[] __initdata __maybe_unused = {
-	IODESC_ENT(WATCHDOG),
-	IODESC_ENT(CLKPWR),
-	IODESC_ENT(TIMER),
-};
-
-struct bus_type s3c2443_subsys = {
-	.name = "s3c2443-core",
-	.dev_name = "s3c2443-core",
-};
-
-static struct device s3c2443_dev = {
-	.bus		= &s3c2443_subsys,
-};
-
-int __init s3c2443_init(void)
-{
-	printk("S3C2443: Initialising architecture\n");
-
-	s3c_nand_setname("s3c2412-nand");
-	s3c_fb_setname("s3c2443-fb");
-
-	s3c_adc_setname("s3c2443-adc");
-	s3c_rtc_setname("s3c2443-rtc");
-
-	/* change WDT IRQ number */
-	s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
-	s3c_device_wdt.resource[1].end   = IRQ_S3C2443_WDT;
-
-	return device_register(&s3c2443_dev);
-}
-
-void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
-}
-
-/* s3c2443_map_io
- *
- * register the standard cpu IO areas, and any passed in from the
- * machine specific initialisation.
- */
-
-void __init s3c2443_map_io(void)
-{
-	s3c24xx_gpiocfg_default.set_pull = s3c2443_gpio_setpull;
-	s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull;
-
-	/* initialize device information early */
-	s3c24xx_spi_setname("s3c2443-spi");
-
-	iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
-}
-
-/* need to register the subsystem before we actually register the device, and
- * we also need to ensure that it has been initialised before any of the
- * drivers even try to use it (even if not on an s3c2443 based system)
- * as a driver which may support both 2443 and 2440 may try and use it.
-*/
-
-static int __init s3c2443_core_init(void)
-{
-	return subsys_system_register(&s3c2443_subsys, NULL);
-}
-
-core_initcall(s3c2443_core_init);
diff --git a/arch/arm/mach-s3c/s3c244x.c b/arch/arm/mach-s3c/s3c244x.c
deleted file mode 100644
index 95df3491e650..000000000000
--- a/arch/arm/mach-s3c/s3c244x.c
+++ /dev/null
@@ -1,128 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2004-2006 Simtec Electronics
-//   Ben Dooks <ben@simtec.co.uk>
-//
-// Samsung S3C2440 and S3C2442 Mobile CPU support (not S3C2443)
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/reboot.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/system_misc.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "map.h"
-#include <asm/irq.h>
-
-#include "regs-clock.h"
-#include "regs-gpio.h"
-
-#include "devs.h"
-#include "cpu.h"
-#include "pm.h"
-
-#include "s3c24xx.h"
-#include "nand-core-s3c24xx.h"
-#include "regs-dsc-s3c24xx.h"
-
-static struct map_desc s3c244x_iodesc[] __initdata __maybe_unused = {
-	IODESC_ENT(CLKPWR),
-	IODESC_ENT(TIMER),
-	IODESC_ENT(WATCHDOG),
-};
-
-/* uart initialisation */
-
-void __init s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
-}
-
-void __init s3c244x_map_io(void)
-{
-	/* register our io-tables */
-
-	iotable_init(s3c244x_iodesc, ARRAY_SIZE(s3c244x_iodesc));
-
-	/* rename any peripherals used differing from the s3c2410 */
-
-	s3c_device_sdi.name  = "s3c2440-sdi";
-	s3c_device_i2c0.name  = "s3c2440-i2c";
-	s3c_nand_setname("s3c2440-nand");
-	s3c_device_ts.name = "s3c2440-ts";
-	s3c_device_usbgadget.name = "s3c2440-usbgadget";
-	s3c2410_device_dclk.name = "s3c2440-dclk";
-}
-
-/* Since the S3C2442 and S3C2440 share items, put both subsystems here */
-
-struct bus_type s3c2440_subsys = {
-	.name		= "s3c2440-core",
-	.dev_name	= "s3c2440-core",
-};
-
-struct bus_type s3c2442_subsys = {
-	.name		= "s3c2442-core",
-	.dev_name	= "s3c2442-core",
-};
-
-/* need to register the subsystem before we actually register the device, and
- * we also need to ensure that it has been initialised before any of the
- * drivers even try to use it (even if not on an s3c2440 based system)
- * as a driver which may support both 2410 and 2440 may try and use it.
-*/
-
-static int __init s3c2440_core_init(void)
-{
-	return subsys_system_register(&s3c2440_subsys, NULL);
-}
-
-core_initcall(s3c2440_core_init);
-
-static int __init s3c2442_core_init(void)
-{
-	return subsys_system_register(&s3c2442_subsys, NULL);
-}
-
-core_initcall(s3c2442_core_init);
-
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save s3c244x_sleep[] = {
-	SAVE_ITEM(S3C2440_DSC0),
-	SAVE_ITEM(S3C2440_DSC1),
-	SAVE_ITEM(S3C2440_GPJDAT),
-	SAVE_ITEM(S3C2440_GPJCON),
-	SAVE_ITEM(S3C2440_GPJUP)
-};
-
-static int s3c244x_suspend(void)
-{
-	s3c_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
-	return 0;
-}
-
-static void s3c244x_resume(void)
-{
-	s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
-}
-
-struct syscore_ops s3c244x_pm_syscore_ops = {
-	.suspend	= s3c244x_suspend,
-	.resume		= s3c244x_resume,
-};
-#endif
diff --git a/arch/arm/mach-s3c/s3c24xx.c b/arch/arm/mach-s3c/s3c24xx.c
deleted file mode 100644
index 819a95364af9..000000000000
--- a/arch/arm/mach-s3c/s3c24xx.c
+++ /dev/null
@@ -1,687 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright (c) 2004-2005 Simtec Electronics
-//	http://www.simtec.co.uk/products/SWLINUX/
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// Common code for S3C24XX machines
-
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <clocksource/samsung_pwm.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/platform_data/clk-s3c2410.h>
-#include <linux/platform_data/dma-s3c24xx.h>
-#include <linux/dmaengine.h>
-#include <linux/clk/samsung.h>
-
-#include "hardware-s3c24xx.h"
-#include "map.h"
-#include "regs-clock.h"
-#include <asm/irq.h>
-#include <asm/cacheflush.h>
-#include <asm/system_info.h>
-#include <asm/system_misc.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "regs-gpio.h"
-#include "dma-s3c24xx.h"
-
-#include "cpu.h"
-#include "devs.h"
-#include "pwm-core.h"
-
-#include "s3c24xx.h"
-
-/* table of supported CPUs */
-
-static const char name_s3c2410[]  = "S3C2410";
-static const char name_s3c2412[]  = "S3C2412";
-static const char name_s3c2416[]  = "S3C2416/S3C2450";
-static const char name_s3c2440[]  = "S3C2440";
-static const char name_s3c2442[]  = "S3C2442";
-static const char name_s3c2442b[]  = "S3C2442B";
-static const char name_s3c2443[]  = "S3C2443";
-static const char name_s3c2410a[] = "S3C2410A";
-static const char name_s3c2440a[] = "S3C2440A";
-
-static struct cpu_table cpu_ids[] __initdata = {
-	{
-		.idcode		= 0x32410000,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2410_map_io,
-		.init_uarts	= s3c2410_init_uarts,
-		.init		= s3c2410_init,
-		.name		= name_s3c2410
-	},
-	{
-		.idcode		= 0x32410002,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2410_map_io,
-		.init_uarts	= s3c2410_init_uarts,
-		.init		= s3c2410a_init,
-		.name		= name_s3c2410a
-	},
-	{
-		.idcode		= 0x32440000,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2440_map_io,
-		.init_uarts	= s3c244x_init_uarts,
-		.init		= s3c2440_init,
-		.name		= name_s3c2440
-	},
-	{
-		.idcode		= 0x32440001,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2440_map_io,
-		.init_uarts	= s3c244x_init_uarts,
-		.init		= s3c2440_init,
-		.name		= name_s3c2440a
-	},
-	{
-		.idcode		= 0x32440aaa,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2442_map_io,
-		.init_uarts	= s3c244x_init_uarts,
-		.init		= s3c2442_init,
-		.name		= name_s3c2442
-	},
-	{
-		.idcode		= 0x32440aab,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2442_map_io,
-		.init_uarts	= s3c244x_init_uarts,
-		.init		= s3c2442_init,
-		.name		= name_s3c2442b
-	},
-	{
-		.idcode		= 0x32412001,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2412_map_io,
-		.init_uarts	= s3c2412_init_uarts,
-		.init		= s3c2412_init,
-		.name		= name_s3c2412,
-	},
-	{			/* a newer version of the s3c2412 */
-		.idcode		= 0x32412003,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2412_map_io,
-		.init_uarts	= s3c2412_init_uarts,
-		.init		= s3c2412_init,
-		.name		= name_s3c2412,
-	},
-	{			/* a strange version of the s3c2416 */
-		.idcode		= 0x32450003,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2416_map_io,
-		.init_uarts	= s3c2416_init_uarts,
-		.init		= s3c2416_init,
-		.name		= name_s3c2416,
-	},
-	{
-		.idcode		= 0x32443001,
-		.idmask		= 0xffffffff,
-		.map_io		= s3c2443_map_io,
-		.init_uarts	= s3c2443_init_uarts,
-		.init		= s3c2443_init,
-		.name		= name_s3c2443,
-	},
-};
-
-/* minimal IO mapping */
-
-static struct map_desc s3c_iodesc[] __initdata __maybe_unused = {
-	IODESC_ENT(GPIO),
-	IODESC_ENT(IRQ),
-	IODESC_ENT(MEMCTRL),
-	IODESC_ENT(UART)
-};
-
-/* read cpu identification code */
-
-static unsigned long s3c24xx_read_idcode_v5(void)
-{
-#if defined(CONFIG_CPU_S3C2416)
-	/* s3c2416 is v5, with S3C24XX_GSTATUS1 instead of S3C2412_GSTATUS1 */
-
-	u32 gs = __raw_readl(S3C24XX_GSTATUS1);
-
-	/* test for s3c2416 or similar device */
-	if ((gs >> 16) == 0x3245)
-		return gs;
-#endif
-
-#if defined(CONFIG_CPU_S3C2412)
-	return __raw_readl(S3C2412_GSTATUS1);
-#else
-	return 1UL;	/* don't look like an 2400 */
-#endif
-}
-
-static unsigned long s3c24xx_read_idcode_v4(void)
-{
-	return __raw_readl(S3C2410_GSTATUS1);
-}
-
-static void s3c24xx_default_idle(void)
-{
-	unsigned long tmp = 0;
-	int i;
-
-	/* idle the system by using the idle mode which will wait for an
-	 * interrupt to happen before restarting the system.
-	 */
-
-	/* Warning: going into idle state upsets jtag scanning */
-
-	__raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
-		     S3C2410_CLKCON);
-
-	/* the samsung port seems to do a loop and then unset idle.. */
-	for (i = 0; i < 50; i++)
-		tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
-
-	/* this bit is not cleared on re-start... */
-
-	__raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
-		     S3C2410_CLKCON);
-}
-
-static struct samsung_pwm_variant s3c24xx_pwm_variant = {
-	.bits		= 16,
-	.div_base	= 1,
-	.has_tint_cstat	= false,
-	.tclk_mask	= (1 << 4),
-};
-
-void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
-{
-	arm_pm_idle = s3c24xx_default_idle;
-
-	/* initialise the io descriptors we need for initialisation */
-	iotable_init(mach_desc, size);
-	iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
-
-	if (cpu_architecture() >= CPU_ARCH_ARMv5) {
-		samsung_cpu_id = s3c24xx_read_idcode_v5();
-	} else {
-		samsung_cpu_id = s3c24xx_read_idcode_v4();
-	}
-
-	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
-
-	samsung_pwm_set_platdata(&s3c24xx_pwm_variant);
-}
-
-void __init s3c24xx_set_timer_source(unsigned int event, unsigned int source)
-{
-	s3c24xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
-	s3c24xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
-}
-
-void __init s3c24xx_timer_init(void)
-{
-	unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
-		IRQ_TIMER0, IRQ_TIMER1, IRQ_TIMER2, IRQ_TIMER3, IRQ_TIMER4,
-	};
-
-	samsung_pwm_clocksource_init(S3C_VA_TIMER,
-					timer_irqs, &s3c24xx_pwm_variant);
-}
-
-/* Serial port registrations */
-
-#define S3C2410_PA_UART0      (S3C24XX_PA_UART)
-#define S3C2410_PA_UART1      (S3C24XX_PA_UART + 0x4000 )
-#define S3C2410_PA_UART2      (S3C24XX_PA_UART + 0x8000 )
-#define S3C2443_PA_UART3      (S3C24XX_PA_UART + 0xC000 )
-
-static struct resource s3c2410_uart0_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2410_PA_UART0, SZ_16K),
-	[1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX0, \
-			IRQ_S3CUART_ERR0 - IRQ_S3CUART_RX0 + 1, \
-			NULL, IORESOURCE_IRQ)
-};
-
-static struct resource s3c2410_uart1_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2410_PA_UART1, SZ_16K),
-	[1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX1, \
-			IRQ_S3CUART_ERR1 - IRQ_S3CUART_RX1 + 1, \
-			NULL, IORESOURCE_IRQ)
-};
-
-static struct resource s3c2410_uart2_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2410_PA_UART2, SZ_16K),
-	[1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX2, \
-			IRQ_S3CUART_ERR2 - IRQ_S3CUART_RX2 + 1, \
-			NULL, IORESOURCE_IRQ)
-};
-
-static struct resource s3c2410_uart3_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2443_PA_UART3, SZ_16K),
-	[1] = DEFINE_RES_NAMED(IRQ_S3CUART_RX3, \
-			IRQ_S3CUART_ERR3 - IRQ_S3CUART_RX3 + 1, \
-			NULL, IORESOURCE_IRQ)
-};
-
-struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
-	[0] = {
-		.resources	= s3c2410_uart0_resource,
-		.nr_resources	= ARRAY_SIZE(s3c2410_uart0_resource),
-	},
-	[1] = {
-		.resources	= s3c2410_uart1_resource,
-		.nr_resources	= ARRAY_SIZE(s3c2410_uart1_resource),
-	},
-	[2] = {
-		.resources	= s3c2410_uart2_resource,
-		.nr_resources	= ARRAY_SIZE(s3c2410_uart2_resource),
-	},
-	[3] = {
-		.resources	= s3c2410_uart3_resource,
-		.nr_resources	= ARRAY_SIZE(s3c2410_uart3_resource),
-	},
-};
-
-#define s3c24xx_device_dma_mask (*((u64[]) { DMA_BIT_MASK(32) }))
-
-#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
-	defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
-static struct resource s3c2410_dma_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA),
-	[1] = DEFINE_RES_IRQ(IRQ_DMA0),
-	[2] = DEFINE_RES_IRQ(IRQ_DMA1),
-	[3] = DEFINE_RES_IRQ(IRQ_DMA2),
-	[4] = DEFINE_RES_IRQ(IRQ_DMA3),
-};
-#endif
-
-#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2442)
-static struct s3c24xx_dma_channel s3c2410_dma_channels[DMACH_MAX] = {
-	[DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), },
-	[DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), },
-	[DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) |
-						S3C24XX_DMA_CHANREQ(2, 2) |
-						S3C24XX_DMA_CHANREQ(1, 3),
-	},
-	[DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), },
-	[DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), },
-	[DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), },
-	[DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), },
-	[DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), },
-	[DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) |
-						 S3C24XX_DMA_CHANREQ(3, 2) |
-						 S3C24XX_DMA_CHANREQ(3, 3),
-	},
-	[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) |
-						  S3C24XX_DMA_CHANREQ(1, 2),
-	},
-	[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 2), },
-	[DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), },
-	[DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), },
-	[DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), },
-	[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), },
-};
-
-static const struct dma_slave_map s3c2410_dma_slave_map[] = {
-	{ "s3c2410-sdi", "rx-tx", (void *)DMACH_SDI },
-	{ "s3c2410-spi.0", "rx", (void *)DMACH_SPI0_RX },
-	{ "s3c2410-spi.0", "tx", (void *)DMACH_SPI0_TX },
-	{ "s3c2410-spi.1", "rx", (void *)DMACH_SPI1_RX },
-	{ "s3c2410-spi.1", "tx", (void *)DMACH_SPI1_TX },
-	/*
-	 * The DMA request source[1] (DMACH_UARTx_SRC2) are
-	 * not used in the UART driver.
-	 */
-	{ "s3c2410-uart.0", "rx", (void *)DMACH_UART0 },
-	{ "s3c2410-uart.0", "tx", (void *)DMACH_UART0 },
-	{ "s3c2410-uart.1", "rx", (void *)DMACH_UART1 },
-	{ "s3c2410-uart.1", "tx", (void *)DMACH_UART1 },
-	{ "s3c2410-uart.2", "rx", (void *)DMACH_UART2 },
-	{ "s3c2410-uart.2", "tx", (void *)DMACH_UART2 },
-	{ "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN },
-	{ "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT },
-	{ "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 },
-	{ "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 },
-	{ "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 },
-	{ "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 },
-	{ "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 },
-	{ "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 },
-	{ "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 },
-	{ "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 }
-};
-
-static struct s3c24xx_dma_platdata s3c2410_dma_platdata = {
-	.num_phy_channels = 4,
-	.channels = s3c2410_dma_channels,
-	.num_channels = DMACH_MAX,
-	.slave_map = s3c2410_dma_slave_map,
-	.slavecnt = ARRAY_SIZE(s3c2410_dma_slave_map),
-};
-
-struct platform_device s3c2410_device_dma = {
-	.name		= "s3c2410-dma",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s3c2410_dma_resource),
-	.resource	= s3c2410_dma_resource,
-	.dev	= {
-		.dma_mask = &s3c24xx_device_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &s3c2410_dma_platdata,
-	},
-};
-#endif
-
-#ifdef CONFIG_CPU_S3C2412
-static struct s3c24xx_dma_channel s3c2412_dma_channels[DMACH_MAX] = {
-	[DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 },
-	[DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 },
-	[DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 },
-	[DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 },
-	[DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 },
-	[DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 },
-	[DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 },
-	[DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 },
-	[DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 },
-	[DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 },
-	[DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 },
-	[DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 },
-	[DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 },
-	[DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 },
-	[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 },
-	[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 },
-	[DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, 13 },
-	[DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, 14 },
-	[DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, 15 },
-	[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, 16 },
-};
-
-static const struct dma_slave_map s3c2412_dma_slave_map[] = {
-	{ "s3c2412-sdi", "rx-tx", (void *)DMACH_SDI },
-	{ "s3c2412-spi.0", "rx", (void *)DMACH_SPI0_RX },
-	{ "s3c2412-spi.0", "tx", (void *)DMACH_SPI0_TX },
-	{ "s3c2412-spi.1", "rx", (void *)DMACH_SPI1_RX },
-	{ "s3c2412-spi.1", "tx", (void *)DMACH_SPI1_TX },
-	{ "s3c2440-uart.0", "rx", (void *)DMACH_UART0 },
-	{ "s3c2440-uart.0", "tx", (void *)DMACH_UART0 },
-	{ "s3c2440-uart.1", "rx", (void *)DMACH_UART1 },
-	{ "s3c2440-uart.1", "tx", (void *)DMACH_UART1 },
-	{ "s3c2440-uart.2", "rx", (void *)DMACH_UART2 },
-	{ "s3c2440-uart.2", "tx", (void *)DMACH_UART2 },
-	{ "s3c2412-iis", "rx", (void *)DMACH_I2S_IN },
-	{ "s3c2412-iis", "tx", (void *)DMACH_I2S_OUT },
-	{ "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 },
-	{ "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 },
-	{ "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 },
-	{ "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 },
-	{ "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 },
-	{ "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 },
-	{ "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 },
-	{ "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 }
-};
-
-static struct s3c24xx_dma_platdata s3c2412_dma_platdata = {
-	.num_phy_channels = 4,
-	.channels = s3c2412_dma_channels,
-	.num_channels = DMACH_MAX,
-	.slave_map = s3c2412_dma_slave_map,
-	.slavecnt = ARRAY_SIZE(s3c2412_dma_slave_map),
-};
-
-struct platform_device s3c2412_device_dma = {
-	.name		= "s3c2412-dma",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s3c2410_dma_resource),
-	.resource	= s3c2410_dma_resource,
-	.dev	= {
-		.dma_mask = &s3c24xx_device_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &s3c2412_dma_platdata,
-	},
-};
-#endif
-
-#if defined(CONFIG_CPU_S3C2440)
-static struct s3c24xx_dma_channel s3c2440_dma_channels[DMACH_MAX] = {
-	[DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), },
-	[DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), },
-	[DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) |
-						S3C24XX_DMA_CHANREQ(6, 1) |
-						S3C24XX_DMA_CHANREQ(2, 2) |
-						S3C24XX_DMA_CHANREQ(1, 3),
-	},
-	[DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), },
-	[DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), },
-	[DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), },
-	[DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), },
-	[DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), },
-	[DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) |
-						 S3C24XX_DMA_CHANREQ(3, 2) |
-						 S3C24XX_DMA_CHANREQ(3, 3),
-	},
-	[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) |
-						  S3C24XX_DMA_CHANREQ(1, 2),
-	},
-	[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 0) |
-						   S3C24XX_DMA_CHANREQ(0, 2),
-	},
-	[DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 0) |
-						  S3C24XX_DMA_CHANREQ(5, 2),
-	},
-	[DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 1) |
-						  S3C24XX_DMA_CHANREQ(6, 3),
-	},
-	[DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 2) |
-						  S3C24XX_DMA_CHANREQ(5, 3),
-	},
-	[DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), },
-	[DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), },
-	[DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), },
-	[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), },
-};
-
-static const struct dma_slave_map s3c2440_dma_slave_map[] = {
-	/* TODO: DMACH_XD0 */
-	/* TODO: DMACH_XD1 */
-	{ "s3c2440-sdi", "rx-tx", (void *)DMACH_SDI },
-	{ "s3c2410-spi.0", "rx", (void *)DMACH_SPI0 },
-	{ "s3c2410-spi.0", "tx", (void *)DMACH_SPI0 },
-	{ "s3c2410-spi.1", "rx", (void *)DMACH_SPI1 },
-	{ "s3c2410-spi.1", "tx", (void *)DMACH_SPI1 },
-	{ "s3c2440-uart.0", "rx", (void *)DMACH_UART0 },
-	{ "s3c2440-uart.0", "tx", (void *)DMACH_UART0 },
-	{ "s3c2440-uart.1", "rx", (void *)DMACH_UART1 },
-	{ "s3c2440-uart.1", "tx", (void *)DMACH_UART1 },
-	{ "s3c2440-uart.2", "rx", (void *)DMACH_UART2 },
-	{ "s3c2440-uart.2", "tx", (void *)DMACH_UART2 },
-	{ "s3c2440-uart.3", "rx", (void *)DMACH_UART3 },
-	{ "s3c2440-uart.3", "tx", (void *)DMACH_UART3 },
-	/* TODO: DMACH_TIMER */
-	{ "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN },
-	{ "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT },
-	{ "samsung-ac97", "rx", (void *)DMACH_PCM_IN },
-	{ "samsung-ac97", "tx", (void *)DMACH_PCM_OUT },
-	{ "samsung-ac97", "rx", (void *)DMACH_MIC_IN },
-	{ "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 },
-	{ "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 },
-	{ "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 },
-	{ "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 },
-	{ "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 },
-	{ "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 },
-	{ "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 },
-	{ "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 }
-};
-
-static struct s3c24xx_dma_platdata s3c2440_dma_platdata = {
-	.num_phy_channels = 4,
-	.channels = s3c2440_dma_channels,
-	.num_channels = DMACH_MAX,
-	.slave_map = s3c2440_dma_slave_map,
-	.slavecnt = ARRAY_SIZE(s3c2440_dma_slave_map),
-};
-
-struct platform_device s3c2440_device_dma = {
-	.name		= "s3c2410-dma",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s3c2410_dma_resource),
-	.resource	= s3c2410_dma_resource,
-	.dev	= {
-		.dma_mask = &s3c24xx_device_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &s3c2440_dma_platdata,
-	},
-};
-#endif
-
-#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
-static struct resource s3c2443_dma_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA),
-	[1] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA0),
-	[2] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA1),
-	[3] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA2),
-	[4] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA3),
-	[5] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA4),
-	[6] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA5),
-};
-
-static struct s3c24xx_dma_channel s3c2443_dma_channels[DMACH_MAX] = {
-	[DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 },
-	[DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 },
-	[DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 },
-	[DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 },
-	[DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 },
-	[DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 },
-	[DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 },
-	[DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 },
-	[DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 },
-	[DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 },
-	[DMACH_UART3] = { S3C24XX_DMA_APB, true, 25 },
-	[DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 },
-	[DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 },
-	[DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 },
-	[DMACH_UART3_SRC2] = { S3C24XX_DMA_APB, true, 26 },
-	[DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 },
-	[DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 },
-	[DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 },
-	[DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, 28 },
-	[DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, 27 },
-	[DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, 29 },
-};
-
-static const struct dma_slave_map s3c2443_dma_slave_map[] = {
-	{ "s3c2440-sdi", "rx-tx", (void *)DMACH_SDI },
-	{ "s3c2443-spi.0", "rx", (void *)DMACH_SPI0_RX },
-	{ "s3c2443-spi.0", "tx", (void *)DMACH_SPI0_TX },
-	{ "s3c2443-spi.1", "rx", (void *)DMACH_SPI1_RX },
-	{ "s3c2443-spi.1", "tx", (void *)DMACH_SPI1_TX },
-	{ "s3c2440-uart.0", "rx", (void *)DMACH_UART0 },
-	{ "s3c2440-uart.0", "tx", (void *)DMACH_UART0 },
-	{ "s3c2440-uart.1", "rx", (void *)DMACH_UART1 },
-	{ "s3c2440-uart.1", "tx", (void *)DMACH_UART1 },
-	{ "s3c2440-uart.2", "rx", (void *)DMACH_UART2 },
-	{ "s3c2440-uart.2", "tx", (void *)DMACH_UART2 },
-	{ "s3c2440-uart.3", "rx", (void *)DMACH_UART3 },
-	{ "s3c2440-uart.3", "tx", (void *)DMACH_UART3 },
-	{ "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN },
-	{ "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT },
-};
-
-static struct s3c24xx_dma_platdata s3c2443_dma_platdata = {
-	.num_phy_channels = 6,
-	.channels = s3c2443_dma_channels,
-	.num_channels = DMACH_MAX,
-	.slave_map = s3c2443_dma_slave_map,
-	.slavecnt = ARRAY_SIZE(s3c2443_dma_slave_map),
-};
-
-struct platform_device s3c2443_device_dma = {
-	.name		= "s3c2443-dma",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s3c2443_dma_resource),
-	.resource	= s3c2443_dma_resource,
-	.dev	= {
-		.dma_mask = &s3c24xx_device_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &s3c2443_dma_platdata,
-	},
-};
-#endif
-
-#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2410)
-void __init s3c2410_init_clocks(int xtal)
-{
-	s3c2410_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
-}
-#endif
-
-#ifdef CONFIG_CPU_S3C2412
-void __init s3c2412_init_clocks(int xtal)
-{
-	s3c2412_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
-}
-#endif
-
-#ifdef CONFIG_CPU_S3C2416
-void __init s3c2416_init_clocks(int xtal)
-{
-	s3c2443_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
-}
-#endif
-
-#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2440)
-void __init s3c2440_init_clocks(int xtal)
-{
-	s3c2410_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR);
-}
-#endif
-
-#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2442)
-void __init s3c2442_init_clocks(int xtal)
-{
-	s3c2410_common_clk_init(NULL, xtal, 2, S3C24XX_VA_CLKPWR);
-}
-#endif
-
-#ifdef CONFIG_CPU_S3C2443
-void __init s3c2443_init_clocks(int xtal)
-{
-	s3c2443_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR);
-}
-#endif
-
-#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2440) || \
-	defined(CONFIG_CPU_S3C2442)
-static struct resource s3c2410_dclk_resource[] = {
-	[0] = DEFINE_RES_MEM(0x56000084, 0x4),
-};
-
-static struct s3c2410_clk_platform_data s3c_clk_platform_data = {
-	.modify_misccr = s3c2410_modify_misccr,
-};
-
-struct platform_device s3c2410_device_dclk = {
-	.name		= "s3c2410-dclk",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(s3c2410_dclk_resource),
-	.resource	= s3c2410_dclk_resource,
-	.dev		= {
-		.platform_data = &s3c_clk_platform_data,
-	},
-};
-#endif
-
-#ifndef CONFIG_COMPILE_TEST
-#pragma message "The platform is deprecated and scheduled for removal. " \
-		"Please reach to the maintainers of the platform " \
-		"and linux-samsung-soc@vger.kernel.org if you still use it." \
-		"Without such feedback, the platform will be removed after 2022."
-#endif
diff --git a/arch/arm/mach-s3c/s3c24xx.h b/arch/arm/mach-s3c/s3c24xx.h
deleted file mode 100644
index 34dd4ac507e9..000000000000
--- a/arch/arm/mach-s3c/s3c24xx.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Common Header for S3C24XX SoCs
- */
-
-#ifndef __ARCH_ARM_MACH_S3C24XX_COMMON_H
-#define __ARCH_ARM_MACH_S3C24XX_COMMON_H __FILE__
-
-#include <linux/reboot.h>
-#include "irqs.h"
-
-struct s3c2410_uartcfg;
-
-#ifdef CONFIG_CPU_S3C2410
-extern  int s3c2410_init(void);
-extern  int s3c2410a_init(void);
-extern void s3c2410_map_io(void);
-extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c2410_init_clocks(int xtal);
-extern void s3c2410_init_irq(void);
-#else
-#define s3c2410_init_clocks NULL
-#define s3c2410_init_uarts NULL
-#define s3c2410_map_io NULL
-#define s3c2410_init NULL
-#define s3c2410a_init NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2412
-extern  int s3c2412_init(void);
-extern void s3c2412_map_io(void);
-extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c2412_init_clocks(int xtal);
-extern  int s3c2412_baseclk_add(void);
-extern void s3c2412_init_irq(void);
-#else
-#define s3c2412_init_clocks NULL
-#define s3c2412_init_uarts NULL
-#define s3c2412_map_io NULL
-#define s3c2412_init NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2416
-extern  int s3c2416_init(void);
-extern void s3c2416_map_io(void);
-extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c2416_init_clocks(int xtal);
-extern  int s3c2416_baseclk_add(void);
-extern void s3c2416_init_irq(void);
-
-extern struct syscore_ops s3c2416_irq_syscore_ops;
-#else
-#define s3c2416_init_clocks NULL
-#define s3c2416_init_uarts NULL
-#define s3c2416_map_io NULL
-#define s3c2416_init NULL
-#endif
-
-#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
-extern void s3c244x_map_io(void);
-extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-#else
-#define s3c244x_init_uarts NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2440
-extern  int s3c2440_init(void);
-extern void s3c2440_map_io(void);
-extern void s3c2440_init_clocks(int xtal);
-extern void s3c2440_init_irq(void);
-#else
-#define s3c2440_init NULL
-#define s3c2440_map_io NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2442
-extern  int s3c2442_init(void);
-extern void s3c2442_map_io(void);
-extern void s3c2442_init_clocks(int xtal);
-extern void s3c2442_init_irq(void);
-#else
-#define s3c2442_init NULL
-#define s3c2442_map_io NULL
-#endif
-
-#ifdef CONFIG_CPU_S3C2443
-extern  int s3c2443_init(void);
-extern void s3c2443_map_io(void);
-extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c2443_init_clocks(int xtal);
-extern  int s3c2443_baseclk_add(void);
-extern void s3c2443_init_irq(void);
-#else
-#define s3c2443_init_clocks NULL
-#define s3c2443_init_uarts NULL
-#define s3c2443_map_io NULL
-#define s3c2443_init NULL
-#endif
-
-extern struct syscore_ops s3c24xx_irq_syscore_ops;
-
-extern struct platform_device s3c2410_device_dma;
-extern struct platform_device s3c2412_device_dma;
-extern struct platform_device s3c2440_device_dma;
-extern struct platform_device s3c2443_device_dma;
-
-extern struct platform_device s3c2410_device_dclk;
-
-enum s3c24xx_timer_mode {
-	S3C24XX_PWM0,
-	S3C24XX_PWM1,
-	S3C24XX_PWM2,
-	S3C24XX_PWM3,
-	S3C24XX_PWM4,
-};
-
-extern void __init s3c24xx_set_timer_source(enum s3c24xx_timer_mode event,
-					    enum s3c24xx_timer_mode source);
-extern void __init s3c24xx_timer_init(void);
-
-#endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */
diff --git a/arch/arm/mach-s3c/s3c6400.c b/arch/arm/mach-s3c/s3c6400.c
deleted file mode 100644
index 802f4fb7462d..000000000000
--- a/arch/arm/mach-s3c/s3c6400.c
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2009 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//	http://armlinux.simtec.co.uk/
-
-/*
- * NOTE: Code in this file is not used when booting with Device Tree support.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/of.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/irq.h>
-
-#include "regs-clock.h"
-
-#include "cpu.h"
-#include "devs.h"
-#include "sdhci.h"
-#include "iic-core.h"
-
-#include "s3c64xx.h"
-#include "onenand-core-s3c64xx.h"
-
-void __init s3c6400_map_io(void)
-{
-	/* setup SDHCI */
-
-	s3c6400_default_sdhci0();
-	s3c6400_default_sdhci1();
-	s3c6400_default_sdhci2();
-
-	/* the i2c devices are directly compatible with s3c2440 */
-	s3c_i2c0_setname("s3c2440-i2c");
-
-	s3c_device_nand.name = "s3c6400-nand";
-
-	s3c_onenand_setname("s3c6400-onenand");
-	s3c64xx_onenand1_setname("s3c6400-onenand");
-}
-
-void __init s3c6400_init_irq(void)
-{
-	/* VIC0 does not have IRQS 5..7,
-	 * VIC1 is fully populated. */
-	s3c64xx_init_irq(~0 & ~(0xf << 5), ~0);
-}
-
-static struct bus_type s3c6400_subsys = {
-	.name		= "s3c6400-core",
-	.dev_name	= "s3c6400-core",
-};
-
-static struct device s3c6400_dev = {
-	.bus	= &s3c6400_subsys,
-};
-
-static int __init s3c6400_core_init(void)
-{
-	/* Not applicable when using DT. */
-	if (of_have_populated_dt() || soc_is_s3c64xx())
-		return 0;
-
-	return subsys_system_register(&s3c6400_subsys, NULL);
-}
-
-core_initcall(s3c6400_core_init);
-
-int __init s3c6400_init(void)
-{
-	printk("S3C6400: Initialising architecture\n");
-
-	return device_register(&s3c6400_dev);
-}
diff --git a/arch/arm/mach-s3c/s3c6410.c b/arch/arm/mach-s3c/s3c6410.c
index dae17d5fd092..e79f18d0ca81 100644
--- a/arch/arm/mach-s3c/s3c6410.c
+++ b/arch/arm/mach-s3c/s3c6410.c
@@ -35,12 +35,9 @@
 #include "cpu.h"
 #include "devs.h"
 #include "sdhci.h"
-#include "adc-core.h"
 #include "iic-core.h"
 
-#include "ata-core-s3c64xx.h"
 #include "s3c64xx.h"
-#include "onenand-core-s3c64xx.h"
 
 void __init s3c6410_map_io(void)
 {
@@ -52,12 +49,6 @@ void __init s3c6410_map_io(void)
 	/* the i2c devices are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
-
-	s3c_adc_setname("s3c64xx-adc");
-	s3c_device_nand.name = "s3c6400-nand";
-	s3c_onenand_setname("s3c6410-onenand");
-	s3c64xx_onenand1_setname("s3c6410-onenand");
-	s3c_cfcon_setname("s3c64xx-pata");
 }
 
 void __init s3c6410_init_irq(void)
diff --git a/arch/arm/mach-s3c/s3c64xx.c b/arch/arm/mach-s3c/s3c64xx.c
index 0a8116c108fe..ad13d7e13e5e 100644
--- a/arch/arm/mach-s3c/s3c64xx.c
+++ b/arch/arm/mach-s3c/s3c64xx.c
@@ -72,18 +72,10 @@ static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 
 /* table of supported CPUs */
 
-static const char name_s3c6400[] = "S3C6400";
 static const char name_s3c6410[] = "S3C6410";
 
 static struct cpu_table cpu_ids[] __initdata = {
 	{
-		.idcode		= S3C6400_CPU_ID,
-		.idmask		= S3C64XX_CPU_MASK,
-		.map_io		= s3c6400_map_io,
-		.init_uarts	= s3c64xx_init_uarts,
-		.init		= s3c6400_init,
-		.name		= name_s3c6400,
-	}, {
 		.idcode		= S3C6410_CPU_ID,
 		.idmask		= S3C64XX_CPU_MASK,
 		.map_io		= s3c6410_map_io,
diff --git a/arch/arm/mach-s3c/sdhci.h b/arch/arm/mach-s3c/sdhci.h
index 9f9d419e58d7..1010f94d4a18 100644
--- a/arch/arm/mach-s3c/sdhci.h
+++ b/arch/arm/mach-s3c/sdhci.h
@@ -48,35 +48,10 @@ extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata;
 
 /* Helper function availability */
 
-extern void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
 extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
 extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
 extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
 
-/* S3C2416 SDHCI setup */
-
-#ifdef CONFIG_S3C2416_SETUP_SDHCI
-static inline void s3c2416_default_sdhci0(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC
-	s3c_hsmmc0_def_platdata.cfg_gpio = s3c2416_setup_sdhci0_cfg_gpio;
-#endif /* CONFIG_S3C_DEV_HSMMC */
-}
-
-static inline void s3c2416_default_sdhci1(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC1
-	s3c_hsmmc1_def_platdata.cfg_gpio = s3c2416_setup_sdhci1_cfg_gpio;
-#endif /* CONFIG_S3C_DEV_HSMMC1 */
-}
-
-#else
-static inline void s3c2416_default_sdhci0(void) { }
-static inline void s3c2416_default_sdhci1(void) { }
-
-#endif /* CONFIG_S3C2416_SETUP_SDHCI */
-
 /* S3C64XX SDHCI setup */
 
 #ifdef CONFIG_S3C64XX_SETUP_SDHCI
diff --git a/arch/arm/mach-s3c/setup-i2c-s3c24xx.c b/arch/arm/mach-s3c/setup-i2c-s3c24xx.c
deleted file mode 100644
index 0d88366b234c..000000000000
--- a/arch/arm/mach-s3c/setup-i2c-s3c24xx.c
+++ /dev/null
@@ -1,23 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2008 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// S3C24XX Base setup for i2c device
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-
-struct platform_device;
-
-#include <linux/platform_data/i2c-s3c2410.h>
-
-#include "gpio-cfg.h"
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-
-void s3c_i2c0_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPE15_IICSDA);
-	s3c_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPE14_IICSCL);
-}
diff --git a/arch/arm/mach-s3c/setup-ide-s3c64xx.c b/arch/arm/mach-s3c/setup-ide-s3c64xx.c
deleted file mode 100644
index f11f2b02e49f..000000000000
--- a/arch/arm/mach-s3c/setup-ide-s3c64xx.c
+++ /dev/null
@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2010 Samsung Electronics Co., Ltd.
-//		http://www.samsung.com/
-//
-// S3C64XX setup information for IDE
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <linux/platform_data/ata-samsung_cf.h>
-
-#include "map.h"
-#include "regs-clock.h"
-#include "gpio-cfg.h"
-#include "gpio-samsung.h"
-
-void s3c64xx_ide_setup_gpio(void)
-{
-	u32 reg;
-
-	reg = readl(S3C_MEM_SYS_CFG) & (~0x3f);
-
-	/* Independent CF interface, CF chip select configuration */
-	writel(reg | MEM_SYS_CFG_INDEP_CF |
-		MEM_SYS_CFG_EBI_FIX_PRI_CFCON, S3C_MEM_SYS_CFG);
-
-	s3c_gpio_cfgpin(S3C64XX_GPB(4), S3C_GPIO_SFN(4));
-
-	/* Set XhiDATA[15:0] pins as CF Data[15:0] */
-	s3c_gpio_cfgpin_range(S3C64XX_GPK(0), 16, S3C_GPIO_SFN(5));
-
-	/* Set XhiADDR[2:0] pins as CF ADDR[2:0] */
-	s3c_gpio_cfgpin_range(S3C64XX_GPL(0), 3, S3C_GPIO_SFN(6));
-
-	/* Set Xhi ctrl pins as CF ctrl pins(IORDY, IOWR, IORD, CE[0:1]) */
-	s3c_gpio_cfgpin(S3C64XX_GPM(5), S3C_GPIO_SFN(1));
-	s3c_gpio_cfgpin_range(S3C64XX_GPM(0), 5, S3C_GPIO_SFN(6));
-}
diff --git a/arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c b/arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c
deleted file mode 100644
index 02131b3a731d..000000000000
--- a/arch/arm/mach-s3c/setup-sdhci-gpio-s3c24xx.c
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2010 Promwad Innovation Company
-//	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
-//
-// S3C2416 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
-//
-// Based on mach-s3c64xx/setup-sdhci-gpio.c
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-#include "gpio-cfg.h"
-#include "sdhci.h"
-
-void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
-{
-	s3c_gpio_cfgrange_nopull(S3C2410_GPE(5), 2 + width, S3C_GPIO_SFN(2));
-}
-
-void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
-{
-	s3c_gpio_cfgrange_nopull(S3C2410_GPL(0), width, S3C_GPIO_SFN(2));
-	s3c_gpio_cfgrange_nopull(S3C2410_GPL(8), 2, S3C_GPIO_SFN(2));
-}
diff --git a/arch/arm/mach-s3c/setup-spi-s3c24xx.c b/arch/arm/mach-s3c/setup-spi-s3c24xx.c
deleted file mode 100644
index 93fa1bbc9d5c..000000000000
--- a/arch/arm/mach-s3c/setup-spi-s3c24xx.c
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// HS-SPI device setup for S3C2443/S3C2416
-//
-// Copyright (C) 2011 Samsung Electronics Ltd.
-//		http://www.samsung.com/
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include "gpio-cfg.h"
-
-#include "hardware-s3c24xx.h"
-#include "regs-gpio.h"
-
-#ifdef CONFIG_S3C64XX_DEV_SPI0
-int s3c64xx_spi0_cfg_gpio(void)
-{
-	/* enable hsspi bit in misccr */
-	s3c2410_modify_misccr(S3C2416_MISCCR_HSSPI_EN2, 1);
-
-	s3c_gpio_cfgall_range(S3C2410_GPE(11), 3,
-			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-
-	return 0;
-}
-#endif
diff --git a/arch/arm/mach-s3c/setup-ts-s3c24xx.c b/arch/arm/mach-s3c/setup-ts-s3c24xx.c
deleted file mode 100644
index 57363eaeb7e8..000000000000
--- a/arch/arm/mach-s3c/setup-ts-s3c24xx.c
+++ /dev/null
@@ -1,29 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2010 Samsung Electronics Co., Ltd.
-//                     http://www.samsung.com/
-//
-// Based on S3C24XX setup for i2c device
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/platform_data/touchscreen-s3c2410.h>
-
-#include "gpio-cfg.h"
-#include "gpio-samsung.h"
-
-/**
- * s3c24xx_ts_cfg_gpio - configure gpio for s3c2410 systems
- * @dev: Device to configure GPIO for (ignored)
- *
- * Configure the GPIO for the S3C2410 system, where we have external FETs
- * connected to the device (later systems such as the S3C2440 integrate
- * these into the device).
- */
-void s3c24xx_ts_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgpin_range(S3C2410_GPG(12), 4, S3C_GPIO_SFN(3));
-}
diff --git a/arch/arm/mach-s3c/simtec-audio.c b/arch/arm/mach-s3c/simtec-audio.c
deleted file mode 100644
index 487485bcc2ab..000000000000
--- a/arch/arm/mach-s3c/simtec-audio.c
+++ /dev/null
@@ -1,76 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2009 Simtec Electronics
-//	http://armlinux.simtec.co.uk/
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// Audio setup for various Simtec S3C24XX implementations
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include "regs-gpio.h"
-#include "gpio-samsung.h"
-#include "gpio-cfg.h"
-
-#include <linux/platform_data/asoc-s3c24xx_simtec.h>
-#include "devs.h"
-
-#include "bast.h"
-#include "simtec.h"
-
-/* platform ops for audio */
-
-static void simtec_audio_startup_lrroute(void)
-{
-	unsigned int tmp;
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	tmp = __raw_readb(BAST_VA_CTRL1);
-	tmp &= ~BAST_CPLD_CTRL1_LRMASK;
-	tmp |= BAST_CPLD_CTRL1_LRCDAC;
-	__raw_writeb(tmp, BAST_VA_CTRL1);
-
-	local_irq_restore(flags);
-}
-
-static struct s3c24xx_audio_simtec_pdata simtec_audio_platdata;
-static char our_name[32];
-
-static struct platform_device simtec_audio_dev = {
-	.name	= our_name,
-	.id	= -1,
-	.dev	= {
-		.parent		= &s3c_device_iis.dev,
-		.platform_data	= &simtec_audio_platdata,
-	},
-};
-
-int __init simtec_audio_add(const char *name, bool has_lr_routing,
-			    struct s3c24xx_audio_simtec_pdata *spd)
-{
-	if (!name)
-		name = "tlv320aic23";
-
-	snprintf(our_name, sizeof(our_name)-1, "s3c24xx-simtec-%s", name);
-
-	/* copy platform data so the source can be __initdata */
-	if (spd)
-		simtec_audio_platdata = *spd;
-
-	if (has_lr_routing)
-		simtec_audio_platdata.startup = simtec_audio_startup_lrroute;
-
-	/* Configure the I2S pins (GPE0...GPE4) in correct mode */
-	s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
-			      S3C_GPIO_PULL_NONE);
-
-	platform_device_register(&s3c_device_iis);
-	platform_device_register(&simtec_audio_dev);
-	return 0;
-}
diff --git a/arch/arm/mach-s3c/simtec-nor.c b/arch/arm/mach-s3c/simtec-nor.c
deleted file mode 100644
index a6fba056a747..000000000000
--- a/arch/arm/mach-s3c/simtec-nor.c
+++ /dev/null
@@ -1,74 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2008 Simtec Electronics
-//	http://armlinux.simtec.co.uk/
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// Simtec NOR mapping
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "map.h"
-
-#include "bast.h"
-#include "simtec.h"
-
-static void simtec_nor_vpp(struct platform_device *pdev, int vpp)
-{
-	unsigned int val;
-
-	val = __raw_readb(BAST_VA_CTRL3);
-
-	printk(KERN_DEBUG "%s(%d)\n", __func__, vpp);
-
-	if (vpp)
-		val |= BAST_CPLD_CTRL3_ROMWEN;
-	else
-		val &= ~BAST_CPLD_CTRL3_ROMWEN;
-
-	__raw_writeb(val, BAST_VA_CTRL3);
-}
-
-static struct physmap_flash_data simtec_nor_pdata = {
-	.width		= 2,
-	.set_vpp	= simtec_nor_vpp,
-	.nr_parts	= 0,
-};
-
-static struct resource simtec_nor_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C2410_CS1 + 0x4000000, SZ_8M),
-};
-
-static struct platform_device simtec_device_nor = {
-	.name		= "physmap-flash",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(simtec_nor_resource),
-	.resource	= simtec_nor_resource,
-	.dev		= {
-		.platform_data = &simtec_nor_pdata,
-	},
-};
-
-void __init nor_simtec_init(void)
-{
-	int ret;
-
-	ret = platform_device_register(&simtec_device_nor);
-	if (ret < 0)
-		printk(KERN_ERR "failed to register physmap-flash device\n");
-	else
-		simtec_nor_vpp(NULL, 1);
-}
diff --git a/arch/arm/mach-s3c/simtec-pm.c b/arch/arm/mach-s3c/simtec-pm.c
deleted file mode 100644
index 490256a766e2..000000000000
--- a/arch/arm/mach-s3c/simtec-pm.c
+++ /dev/null
@@ -1,60 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2004 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// http://armlinux.simtec.co.uk/
-//
-// Power Management helpers for Simtec S3C24XX implementations
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "map.h"
-#include "regs-gpio.h"
-
-#include <asm/mach-types.h>
-
-#include "pm.h"
-
-#include "regs-mem-s3c24xx.h"
-
-#define COPYRIGHT ", Copyright 2005 Simtec Electronics"
-
-/* pm_simtec_init
- *
- * enable the power management functions
-*/
-
-static __init int pm_simtec_init(void)
-{
-	unsigned long gstatus4;
-
-	/* check which machine we are running on */
-
-	if (!machine_is_bast() && !machine_is_vr1000() &&
-	    !machine_is_anubis() && !machine_is_osiris() &&
-	    !machine_is_aml_m5900())
-		return 0;
-
-	printk(KERN_INFO "Simtec Board Power Management" COPYRIGHT "\n");
-
-	gstatus4  = (__raw_readl(S3C2410_BANKCON7) & 0x3) << 30;
-	gstatus4 |= (__raw_readl(S3C2410_BANKCON6) & 0x3) << 28;
-	gstatus4 |= (__raw_readl(S3C2410_BANKSIZE) & S3C2410_BANKSIZE_MASK);
-
-	__raw_writel(gstatus4, S3C2410_GSTATUS4);
-
-	return s3c_pm_init();
-}
-
-arch_initcall(pm_simtec_init);
diff --git a/arch/arm/mach-s3c/simtec-usb.c b/arch/arm/mach-s3c/simtec-usb.c
deleted file mode 100644
index 76cedb5c7373..000000000000
--- a/arch/arm/mach-s3c/simtec-usb.c
+++ /dev/null
@@ -1,125 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright 2004-2005 Simtec Electronics
-//   Ben Dooks <ben@simtec.co.uk>
-//
-// http://www.simtec.co.uk/products/EB2410ITX/
-//
-// Simtec BAST and Thorcom VR1000 USB port support functions
-
-#define DEBUG
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/gpio.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "gpio-samsung.h"
-#include "irqs.h"
-#include <asm/irq.h>
-
-#include <linux/platform_data/usb-ohci-s3c2410.h>
-#include "devs.h"
-
-#include "bast.h"
-#include "simtec.h"
-
-/* control power and monitor over-current events on various Simtec
- * designed boards.
-*/
-
-static unsigned int power_state[2];
-
-static void
-usb_simtec_powercontrol(int port, int to)
-{
-	pr_debug("usb_simtec_powercontrol(%d,%d)\n", port, to);
-
-	power_state[port] = to;
-
-	if (power_state[0] && power_state[1])
-		gpio_set_value(S3C2410_GPB(4), 0);
-	else
-		gpio_set_value(S3C2410_GPB(4), 1);
-}
-
-static irqreturn_t
-usb_simtec_ocirq(int irq, void *pw)
-{
-	struct s3c2410_hcd_info *info = pw;
-
-	if (gpio_get_value(S3C2410_GPG(10)) == 0) {
-		pr_debug("usb_simtec: over-current irq (oc detected)\n");
-		s3c2410_usb_report_oc(info, 3);
-	} else {
-		pr_debug("usb_simtec: over-current irq (oc cleared)\n");
-		s3c2410_usb_report_oc(info, 0);
-	}
-
-	return IRQ_HANDLED;
-}
-
-static void usb_simtec_enableoc(struct s3c2410_hcd_info *info, int on)
-{
-	int ret;
-
-	if (on) {
-		ret = request_irq(BAST_IRQ_USBOC, usb_simtec_ocirq,
-				  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-				  "USB Over-current", info);
-		if (ret != 0) {
-			printk(KERN_ERR "failed to request usb oc irq\n");
-		}
-	} else {
-		free_irq(BAST_IRQ_USBOC, info);
-	}
-}
-
-static struct s3c2410_hcd_info usb_simtec_info __initdata = {
-	.port[0]	= {
-		.flags	= S3C_HCDFLG_USED
-	},
-	.port[1]	= {
-		.flags	= S3C_HCDFLG_USED
-	},
-
-	.power_control	= usb_simtec_powercontrol,
-	.enable_oc	= usb_simtec_enableoc,
-};
-
-
-int __init usb_simtec_init(void)
-{
-	int ret;
-
-	printk("USB Power Control, Copyright 2004 Simtec Electronics\n");
-
-	ret = gpio_request(S3C2410_GPB(4), "USB power control");
-	if (ret < 0) {
-		pr_err("%s: failed to get GPB4\n", __func__);
-		return ret;
-	}
-
-	ret = gpio_request(S3C2410_GPG(10), "USB overcurrent");
-	if (ret < 0) {
-		pr_err("%s: failed to get GPG10\n", __func__);
-		gpio_free(S3C2410_GPB(4));
-		return ret;
-	}
-
-	/* turn power on */
-	gpio_direction_output(S3C2410_GPB(4), 1);
-	gpio_direction_input(S3C2410_GPG(10));
-
-	s3c_ohci_set_platdata(&usb_simtec_info);
-	return 0;
-}
diff --git a/arch/arm/mach-s3c/simtec.h b/arch/arm/mach-s3c/simtec.h
deleted file mode 100644
index d96bd60872b8..000000000000
--- a/arch/arm/mach-s3c/simtec.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Simtec common functions
- */
-
-struct s3c24xx_audio_simtec_pdata;
-
-extern void nor_simtec_init(void);
-
-extern int usb_simtec_init(void);
-
-extern int simtec_audio_add(const char *codec_name, bool has_lr_routing,
-			    struct s3c24xx_audio_simtec_pdata *pdata);
diff --git a/arch/arm/mach-s3c/sleep-s3c2410.S b/arch/arm/mach-s3c/sleep-s3c2410.S
deleted file mode 100644
index 04aded98782b..000000000000
--- a/arch/arm/mach-s3c/sleep-s3c2410.S
+++ /dev/null
@@ -1,54 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 Power Manager (Suspend-To-RAM) support
- *
- * Based on PXA/SA1100 sleep code by:
- *	Nicolas Pitre, (c) 2002 Monta Vista Software Inc
- *	Cliff Brake, (c) 2001
- */
-
-#include <linux/linkage.h>
-#include <linux/serial_s3c.h>
-#include <asm/assembler.h>
-#include "map.h"
-
-#include "regs-gpio.h"
-#include "regs-clock.h"
-
-#include "regs-mem-s3c24xx.h"
-
-	/* s3c2410_cpu_suspend
-	 *
-	 * put the cpu into sleep mode
-	*/
-
-ENTRY(s3c2410_cpu_suspend)
-	@@ prepare cpu to sleep
-
-	ldr	r4, =S3C2410_REFRESH
-	ldr	r5, =S3C24XX_MISCCR
-	ldr	r6, =S3C2410_CLKCON
-	ldr	r7, [r4]		@ get REFRESH (and ensure in TLB)
-	ldr	r8, [r5]		@ get MISCCR (and ensure in TLB)
-	ldr	r9, [r6]		@ get CLKCON (and ensure in TLB)
-
-	orr	r7, r7, #S3C2410_REFRESH_SELF	@ SDRAM sleep command
-	orr	r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals
-	orr	r9, r9, #S3C2410_CLKCON_POWER	@ power down command
-
-	teq	pc, #0			@ first as a trial-run to load cache
-	bl	s3c2410_do_sleep
-	teq	r0, r0			@ now do it for real
-	b	s3c2410_do_sleep	@
-
-	@@ align next bit of code to cache line
-	.align	5
-s3c2410_do_sleep:
-	streq	r7, [r4]			@ SDRAM sleep command
-	streq	r8, [r5]			@ SDRAM power-down config
-	streq	r9, [r6]			@ CPU sleep
-1:	beq	1b
-	ret	lr
diff --git a/arch/arm/mach-s3c/sleep-s3c2412.S b/arch/arm/mach-s3c/sleep-s3c2412.S
deleted file mode 100644
index b4b61737fbb2..000000000000
--- a/arch/arm/mach-s3c/sleep-s3c2412.S
+++ /dev/null
@@ -1,53 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (c) 2007 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2412 Power Manager low-level sleep support
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include "map.h"
-
-#include "regs-irq.h"
-
-	.text
-
-	.global	s3c2412_sleep_enter
-
-s3c2412_sleep_enter:
-	mov	r0, #0			/* argument for coprocessors */
-	ldr	r1, =S3C2410_INTPND
-	ldr	r2, =S3C2410_SRCPND
-	ldr	r3, =S3C2410_EINTPEND
-
-	teq	r0, r0
-	bl	s3c2412_sleep_enter1
-	teq	pc, r0
-	bl	s3c2412_sleep_enter1
-
-	.align	5
-
-	/* this is called twice, first with the Z flag to ensure that the
-	 * instructions have been loaded into the cache, and the second
-	 * time to try and suspend the system.
-	*/
-s3c2412_sleep_enter1:
-	mcr	p15, 0, r0, c7, c10, 4
-	mcrne	p15, 0, r0, c7, c0, 4
-
-	/* if we return from here, it is because an interrupt was
-	 * active when we tried to shutdown. Try and ack the IRQ and
-	 * retry, as simply returning causes the system to lock.
-	*/
-
-	ldrne	r9, [r1]
-	strne	r9, [r1]
-	ldrne	r9, [r2]
-	strne	r9, [r2]
-	ldrne	r9, [r3]
-	strne	r9, [r3]
-	bne	s3c2412_sleep_enter1
-
-	ret	lr
diff --git a/arch/arm/mach-s3c/sleep-s3c24xx.S b/arch/arm/mach-s3c/sleep-s3c24xx.S
deleted file mode 100644
index 4b2af91f3dce..000000000000
--- a/arch/arm/mach-s3c/sleep-s3c24xx.S
+++ /dev/null
@@ -1,69 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (c) 2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 Power Manager (Suspend-To-RAM) support
- *
- * Based on PXA/SA1100 sleep code by:
- *	Nicolas Pitre, (c) 2002 Monta Vista Software Inc
- *	Cliff Brake, (c) 2001
- */
-
-#include <linux/linkage.h>
-#include <linux/serial_s3c.h>
-#include <asm/assembler.h>
-#include "map.h"
-
-#include "regs-gpio.h"
-#include "regs-clock.h"
-
-/*
- * S3C24XX_DEBUG_RESUME is dangerous if your bootloader does not
- * reset the UART configuration, only enable if you really need this!
- */
-//#define S3C24XX_DEBUG_RESUME
-
-	.text
-
-	/* sleep magic, to allow the bootloader to check for an valid
-	 * image to resume to. Must be the first word before the
-	 * s3c_cpu_resume entry.
-	*/
-
-	.word	0x2bedf00d
-
-	/* s3c_cpu_resume
-	 *
-	 * resume code entry for bootloader to call
-	*/
-
-ENTRY(s3c_cpu_resume)
-	mov	r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
-	msr	cpsr_c, r0
-
-	@@ load UART to allow us to print the two characters for
-	@@ resume debug
-
-	mov	r2, #S3C24XX_PA_UART & 0xff000000
-	orr	r2, r2, #S3C24XX_PA_UART & 0xff000
-
-#if 0
-	/* SMDK2440 LED set */
-	mov	r14, #S3C24XX_PA_GPIO
-	ldr	r12, [ r14, #0x54 ]
-	bic	r12, r12, #3<<4
-	orr	r12, r12, #1<<7
-	str	r12, [ r14, #0x54 ]
-#endif
-
-#ifdef S3C24XX_DEBUG_RESUME
-	mov	r3, #'L'
-	strb	r3, [ r2, #S3C2410_UTXH ]
-1001:
-	ldrb	r14, [ r3, #S3C2410_UTRSTAT ]
-	tst	r14, #S3C2410_UTRSTAT_TXE
-	beq	1001b
-#endif /* S3C24XX_DEBUG_RESUME */
-
-	b	cpu_resume
diff --git a/arch/arm/mach-s3c/sleep-s3c64xx.S b/arch/arm/mach-s3c/sleep-s3c64xx.S
index 739e53fbce09..908aa76b1062 100644
--- a/arch/arm/mach-s3c/sleep-s3c64xx.S
+++ b/arch/arm/mach-s3c/sleep-s3c64xx.S
@@ -39,31 +39,4 @@
 ENTRY(s3c_cpu_resume)
 	msr	cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
 	ldr	r2, =LL_UART		/* for debug */
-
-#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
-
-#define S3C64XX_GPNCON			(S3C64XX_GPN_BASE + 0x00)
-#define S3C64XX_GPNDAT			(S3C64XX_GPN_BASE + 0x04)
-
-#define S3C64XX_GPN_CONMASK(__gpio)	(0x3 << ((__gpio) * 2))
-#define S3C64XX_GPN_OUTPUT(__gpio)	(0x1 << ((__gpio) * 2))
-
-	/* Initialise the GPIO state if we are debugging via the SMDK LEDs,
-	 * as the uboot version supplied resets these to inputs during the
-	 * resume checks.
-	*/
-
-	ldr	r3, =S3C64XX_PA_GPIO
-	ldr	r0, [ r3, #S3C64XX_GPNCON ]
-	bic	r0, r0, #(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) | \
-			  S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15))
-	orr	r0, r0, #(S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) | \
-			  S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15))
-	str	r0, [ r3, #S3C64XX_GPNCON ]
-
-	ldr	r0, [ r3, #S3C64XX_GPNDAT ]
-	bic	r0, r0, #0xf << 12			@ GPN12..15
-	orr	r0, r0, #1 << 15			@ GPN15
-	str	r0, [ r3, #S3C64XX_GPNDAT ]
-#endif
 	b	cpu_resume
diff --git a/arch/arm/mach-s3c/spi-core-s3c24xx.h b/arch/arm/mach-s3c/spi-core-s3c24xx.h
deleted file mode 100644
index 919c5fd0c9af..000000000000
--- a/arch/arm/mach-s3c/spi-core-s3c24xx.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2012 Heiko Stuebner <heiko@sntech.de>
- */
-
-#ifndef __PLAT_S3C_SPI_CORE_S3C24XX_H
-#define __PLAT_S3C_SPI_CORE_S3C24XX_H
-
-/* These functions are only for use with the core support code, such as
- * the cpu specific initialisation code
- */
-
-/* re-define device name depending on support. */
-static inline void s3c24xx_spi_setname(char *name)
-{
-#ifdef CONFIG_S3C64XX_DEV_SPI0
-	s3c64xx_device_spi0.name = name;
-#endif
-}
-
-#endif /* __PLAT_S3C_SPI_CORE_S3C24XX_H */
diff --git a/arch/arm/mach-s3c/vr1000.h b/arch/arm/mach-s3c/vr1000.h
deleted file mode 100644
index 3cfa296bec2a..000000000000
--- a/arch/arm/mach-s3c/vr1000.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (c) 2003 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * VR1000 - CPLD control constants
- * Machine VR1000 - IRQ Number definitions
- * Machine VR1000 - Memory map definitions
- */
-
-#ifndef __MACH_S3C24XX_VR1000_H
-#define __MACH_S3C24XX_VR1000_H __FILE__
-
-#define VR1000_CPLD_CTRL2_RAMWEN	(0x04)	/* SRAM Write Enable */
-
-/* irq numbers to onboard peripherals */
-
-#define VR1000_IRQ_USBOC		IRQ_EINT19
-#define VR1000_IRQ_IDE0			IRQ_EINT16
-#define VR1000_IRQ_IDE1			IRQ_EINT17
-#define VR1000_IRQ_SERIAL		IRQ_EINT12
-#define VR1000_IRQ_DM9000A		IRQ_EINT10
-#define VR1000_IRQ_DM9000N		IRQ_EINT9
-#define VR1000_IRQ_SMALERT		IRQ_EINT8
-
-/* map */
-
-#define VR1000_IOADDR(x)		(S3C2410_ADDR((x) + 0x01300000))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define VR1000_VA_CTRL1			VR1000_IOADDR(0x00000000) /* 0x01300000 */
-#define VR1000_PA_CTRL1			(S3C2410_CS5 | 0x7800000)
-
-#define VR1000_VA_CTRL2			VR1000_IOADDR(0x00100000) /* 0x01400000 */
-#define VR1000_PA_CTRL2			(S3C2410_CS1 | 0x6000000)
-
-#define VR1000_VA_CTRL3			VR1000_IOADDR(0x00200000) /* 0x01500000 */
-#define VR1000_PA_CTRL3			(S3C2410_CS1 | 0x6800000)
-
-#define VR1000_VA_CTRL4			VR1000_IOADDR(0x00300000) /* 0x01600000 */
-#define VR1000_PA_CTRL4			(S3C2410_CS1 | 0x7000000)
-
-/* next, we have the PC104 ISA interrupt registers */
-
-#define VR1000_PA_PC104_IRQREQ		(S3C2410_CS5 | 0x6000000) /* 0x01700000 */
-#define VR1000_VA_PC104_IRQREQ		VR1000_IOADDR(0x00400000)
-
-#define VR1000_PA_PC104_IRQRAW		(S3C2410_CS5 | 0x6800000) /* 0x01800000 */
-#define VR1000_VA_PC104_IRQRAW		VR1000_IOADDR(0x00500000)
-
-#define VR1000_PA_PC104_IRQMASK		(S3C2410_CS5 | 0x7000000) /* 0x01900000 */
-#define VR1000_VA_PC104_IRQMASK		VR1000_IOADDR(0x00600000)
-
-/*
- * 0xE0000000 contains the IO space that is split by speed and
- * whether the access is for 8 or 16bit IO... this ensures that
- * the correct access is made
- *
- * 0x10000000 of space, partitioned as so:
- *
- * 0x00000000 to 0x04000000  8bit,  slow
- * 0x04000000 to 0x08000000  16bit, slow
- * 0x08000000 to 0x0C000000  16bit, net
- * 0x0C000000 to 0x10000000  16bit, fast
- *
- * each of these spaces has the following in:
- *
- * 0x02000000 to 0x02100000 1MB  IDE primary channel
- * 0x02100000 to 0x02200000 1MB  IDE primary channel aux
- * 0x02200000 to 0x02400000 1MB  IDE secondary channel
- * 0x02300000 to 0x02400000 1MB  IDE secondary channel aux
- * 0x02500000 to 0x02600000 1MB  Davicom DM9000 ethernet controllers
- * 0x02600000 to 0x02700000 1MB
- *
- * the phyiscal layout of the zones are:
- *  nGCS2 - 8bit, slow
- *  nGCS3 - 16bit, slow
- *  nGCS4 - 16bit, net
- *  nGCS5 - 16bit, fast
- */
-
-#define VR1000_VA_MULTISPACE	(0xE0000000)
-
-#define VR1000_VA_ISAIO		(VR1000_VA_MULTISPACE + 0x00000000)
-#define VR1000_VA_ISAMEM	(VR1000_VA_MULTISPACE + 0x01000000)
-#define VR1000_VA_IDEPRI	(VR1000_VA_MULTISPACE + 0x02000000)
-#define VR1000_VA_IDEPRIAUX	(VR1000_VA_MULTISPACE + 0x02100000)
-#define VR1000_VA_IDESEC	(VR1000_VA_MULTISPACE + 0x02200000)
-#define VR1000_VA_IDESECAUX	(VR1000_VA_MULTISPACE + 0x02300000)
-#define VR1000_VA_ASIXNET	(VR1000_VA_MULTISPACE + 0x02400000)
-#define VR1000_VA_DM9000	(VR1000_VA_MULTISPACE + 0x02500000)
-#define VR1000_VA_SUPERIO	(VR1000_VA_MULTISPACE + 0x02600000)
-
-/* physical offset addresses for the peripherals */
-
-#define VR1000_PA_IDEPRI	(0x02000000)
-#define VR1000_PA_IDEPRIAUX	(0x02800000)
-#define VR1000_PA_IDESEC	(0x03000000)
-#define VR1000_PA_IDESECAUX	(0x03800000)
-#define VR1000_PA_DM9000	(0x05000000)
-
-#define VR1000_PA_SERIAL	(0x11800000)
-#define VR1000_VA_SERIAL	(VR1000_IOADDR(0x00700000))
-
-/* VR1000 ram is in CS1, with A26..A24 = 2_101 */
-#define VR1000_PA_SRAM		(S3C2410_CS1 | 0x05000000)
-
-/* some configurations for the peripherals */
-
-#define VR1000_DM9000_CS	VR1000_VAM_CS4
-
-#endif /* __MACH_S3C24XX_VR1000_H */
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index fb9cd10705de..0fb4c24cfad5 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -41,35 +41,6 @@ config ASSABET_NEPONSET
 	  Microprocessor Development Board (Assabet)  with the SA-1111
 	  Development Board (Nepon).
 
-config SA1100_CERF
-	bool "CerfBoard"
-	depends on UNUSED_BOARD_FILES
-	select ARM_SA1110_CPUFREQ
-	select LEDS_GPIO_REGISTER
-	help
-	  The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued).
-	  More information is available at:
-	  <http://www.intrinsyc.com/products/cerfboard/>.
-
-	  Say Y if configuring for an Intrinsyc CerfBoard.
-	  Say N otherwise.
-
-choice
-	prompt "Cerf Flash available"
-	depends on SA1100_CERF
-	default SA1100_CERF_FLASH_8MB
-
-config SA1100_CERF_FLASH_8MB
-	bool "8MB"
-
-config SA1100_CERF_FLASH_16MB
-	bool "16MB"
-
-config SA1100_CERF_FLASH_32MB
-	bool "32MB"
-
-endchoice
-
 config SA1100_COLLIE
 	bool "Sharp Zaurus SL5500"
 	# FIXME: select ARM_SA11x0_CPUFREQ
@@ -79,16 +50,6 @@ config SA1100_COLLIE
 	help
 	  Say Y here to support the Sharp Zaurus SL5500 PDAs.
 
-config SA1100_H3100
-	bool "Compaq iPAQ H3100"
-	depends on UNUSED_BOARD_FILES
-	select ARM_SA1110_CPUFREQ
-	select HTC_EGPIO
-	select MFD_IPAQ_MICRO
-	help
-	  Say Y here if you intend to run this kernel on the Compaq iPAQ
-	  H3100 handheld computer.
-
 config SA1100_H3600
 	bool "Compaq iPAQ H3600/H3700"
 	select ARM_SA1110_CPUFREQ
@@ -98,18 +59,8 @@ config SA1100_H3600
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
 	  H3600 and H3700 handheld computers.
 
-config SA1100_BADGE4
-	bool "HP Labs BadgePAD 4"
-	depends on UNUSED_BOARD_FILES
-	select ARM_SA1100_CPUFREQ
-	select SA1111
-	help
-	  Say Y here if you want to build a kernel for the HP Laboratories
-	  BadgePAD 4.
-
 config SA1100_JORNADA720
 	bool "HP Jornada 720"
-	depends on UNUSED_BOARD_FILES
 	# FIXME: select ARM_SA11x0_CPUFREQ
 	select SA1111
 	help
@@ -127,71 +78,8 @@ config SA1100_JORNADA720_SSP
 	  keyboard, touchscreen, backlight and battery. This driver also activates
 	  the generic SSP which it extends.
 
-config SA1100_HACKKIT
-	bool "HackKit Core CPU Board"
-	depends on UNUSED_BOARD_FILES
-	select ARM_SA1100_CPUFREQ
-	help
-	  Say Y here to support the HackKit Core CPU Board
-	  <http://hackkit.eletztrick.de>;
-
-config SA1100_LART
-	bool "LART"
-	depends on UNUSED_BOARD_FILES
-	select ARM_SA1100_CPUFREQ
-	help
-	  Say Y here if you are using the Linux Advanced Radio Terminal
-	  (also known as the LART).  See <http://www.lartmaker.nl/> for
-	  information on the LART.
-
-config SA1100_NANOENGINE
-	bool "nanoEngine"
-	depends on UNUSED_BOARD_FILES
-	select ARM_SA1110_CPUFREQ
-	select FORCE_PCI
-	select PCI_NANOENGINE
-	help
-	  Say Y here if you are using the Bright Star Engineering nanoEngine.
-	  See <http://www.brightstareng.com/arm/nanoeng.htm> for information
-	  on the BSE nanoEngine.
-
-config SA1100_PLEB
-	bool "PLEB"
-	depends on UNUSED_BOARD_FILES
-	select ARM_SA1100_CPUFREQ
-	help
-	  Say Y here if you are using version 1 of the Portable Linux
-	  Embedded Board (also known as PLEB).
-	  See <http://www.disy.cse.unsw.edu.au/Hardware/PLEB/>
-	  for more information.
-
-config SA1100_SHANNON
-	bool "Shannon"
-	depends on UNUSED_BOARD_FILES
-	select ARM_SA1100_CPUFREQ
-	select REGULATOR
-	select REGULATOR_FIXED_VOLTAGE
-	help
-	  The Shannon (also known as a Tuxscreen, and also as a IS2630) was a
-	  limited edition webphone produced by Philips. The Shannon is a SA1100
-	  platform with a 640x480 LCD, touchscreen, CIR keyboard, PCMCIA slots,
-	  and a telco interface.
-
-config SA1100_SIMPAD
-	bool "Simpad"
-	depends on UNUSED_BOARD_FILES
-	select ARM_SA1110_CPUFREQ
-	help
-	  The SIEMENS webpad SIMpad is based on the StrongARM 1110. There
-	  are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB
-	  FLASH. The SL4 version got 64 MB RAM and 32 MB FLASH and a
-	  PCMCIA-Slot. The version for the Germany Telecom (DTAG) is the same
-	  like CL4 in additional it has a PCMCIA-Slot. For more information
-	  visit <http://www.usa.siemens.com/> or <http://www.siemens.ch/>.
-
 config SA1100_SSP
 	tristate "Generic PIO SSP"
-	depends on UNUSED_BOARD_FILES
 	help
 	  Say Y here to enable support for the generic PIO SSP driver.
 	  This isn't for audio support, but for attached sensors and
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index 28c1cae0053f..b5816d675152 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -9,32 +9,11 @@ obj-y := clock.o generic.o #nmi-oopser.o
 # Specific board support
 obj-$(CONFIG_SA1100_ASSABET)		+= assabet.o
 obj-$(CONFIG_ASSABET_NEPONSET)		+= neponset.o
-
-obj-$(CONFIG_SA1100_BADGE4)		+= badge4.o
-
-obj-$(CONFIG_SA1100_CERF)		+= cerf.o
-
 obj-$(CONFIG_SA1100_COLLIE)		+= collie.o
-
-obj-$(CONFIG_SA1100_H3100)		+= h3100.o h3xxx.o
 obj-$(CONFIG_SA1100_H3600)		+= h3600.o h3xxx.o
-
-obj-$(CONFIG_SA1100_HACKKIT)		+= hackkit.o
-
 obj-$(CONFIG_SA1100_JORNADA720)		+= jornada720.o
 obj-$(CONFIG_SA1100_JORNADA720_SSP)	+= jornada720_ssp.o
 
-obj-$(CONFIG_SA1100_LART)		+= lart.o
-
-obj-$(CONFIG_SA1100_NANOENGINE)		+= nanoengine.o
-obj-$(CONFIG_PCI_NANOENGINE)		+= pci-nanoengine.o
-
-obj-$(CONFIG_SA1100_PLEB)		+= pleb.o
-
-obj-$(CONFIG_SA1100_SHANNON)		+= shannon.o
-
-obj-$(CONFIG_SA1100_SIMPAD)		+= simpad.o
-
 # Miscellaneous functions
 obj-$(CONFIG_PM)			+= pm.o sleep.o
 obj-$(CONFIG_SA1100_SSP)		+= ssp.o
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 9919e0f32c4b..2eba112f2ad8 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -38,7 +38,6 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
-#include <linux/platform_data/irda-sa11x0.h>
 #include <asm/mach/map.h>
 #include <mach/assabet.h>
 #include <linux/platform_data/mfd-mcp-sa11x0.h>
@@ -297,38 +296,6 @@ static struct resource assabet_flash_resources[] = {
 };
 
 
-/*
- * Assabet IrDA support code.
- */
-
-static int assabet_irda_set_power(struct device *dev, unsigned int state)
-{
-	static unsigned int bcr_state[4] = {
-		ASSABET_BCR_IRDA_MD0,
-		ASSABET_BCR_IRDA_MD1|ASSABET_BCR_IRDA_MD0,
-		ASSABET_BCR_IRDA_MD1,
-		0
-	};
-
-	if (state < 4)
-		ASSABET_BCR_frob(ASSABET_BCR_IRDA_MD1 | ASSABET_BCR_IRDA_MD0,
-				 bcr_state[state]);
-	return 0;
-}
-
-static void assabet_irda_set_speed(struct device *dev, unsigned int speed)
-{
-	if (speed < 4000000)
-		ASSABET_BCR_clear(ASSABET_BCR_IRDA_FSEL);
-	else
-		ASSABET_BCR_set(ASSABET_BCR_IRDA_FSEL);
-}
-
-static struct irda_platform_data assabet_irda_data = {
-	.set_power	= assabet_irda_set_power,
-	.set_speed	= assabet_irda_set_speed,
-};
-
 static struct ucb1x00_plat_data assabet_ucb1x00_data = {
 	.reset		= assabet_ucb1x00_reset,
 	.gpio_base	= -1,
@@ -618,7 +585,6 @@ static void __init assabet_init(void)
 #endif
 	sa11x0_register_mtd(&assabet_flash_data, assabet_flash_resources,
 			    ARRAY_SIZE(assabet_flash_resources));
-	sa11x0_register_irda(&assabet_irda_data);
 	sa11x0_register_mcp(&assabet_mcp_data);
 
 	if (!machine_has_neponset())
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
deleted file mode 100644
index de79f3502045..000000000000
--- a/arch/arm/mach-sa1100/badge4.c
+++ /dev/null
@@ -1,338 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-sa1100/badge4.c
- *
- * BadgePAD 4 specific initialization
- *
- *   Tim Connors <connors@hpl.hp.com>
- *   Christopher Hoover <ch@hpl.hp.com>
- *
- * Copyright (C) 2002 Hewlett-Packard Company
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_data/sa11x0-serial.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/errno.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/setup.h>
-#include <mach/irqs.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-#include <asm/hardware/sa1111.h>
-
-#include <mach/badge4.h>
-
-#include "generic.h"
-
-static struct resource sa1111_resources[] = {
-	[0] = DEFINE_RES_MEM(BADGE4_SA1111_BASE, 0x2000),
-	[1] = DEFINE_RES_IRQ(BADGE4_IRQ_GPIO_SA1111),
-};
-
-static int badge4_sa1111_enable(void *data, unsigned devid)
-{
-	if (devid == SA1111_DEVID_USB)
-		badge4_set_5V(BADGE4_5V_USB, 1);
-	return 0;
-}
-
-static void badge4_sa1111_disable(void *data, unsigned devid)
-{
-	if (devid == SA1111_DEVID_USB)
-		badge4_set_5V(BADGE4_5V_USB, 0);
-}
-
-static struct sa1111_platform_data sa1111_info = {
-	.disable_devs	= SA1111_DEVID_PS2_MSE,
-	.enable		= badge4_sa1111_enable,
-	.disable	= badge4_sa1111_disable,
-};
-
-static u64 sa1111_dmamask = 0xffffffffUL;
-
-static struct platform_device sa1111_device = {
-	.name		= "sa1111",
-	.id		= 0,
-	.dev		= {
-		.dma_mask = &sa1111_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-		.platform_data = &sa1111_info,
-	},
-	.num_resources	= ARRAY_SIZE(sa1111_resources),
-	.resource	= sa1111_resources,
-};
-
-/* LEDs */
-struct gpio_led badge4_gpio_leds[] = {
-	{
-		.name			= "badge4:red",
-		.default_trigger	= "heartbeat",
-		.gpio			= 7,
-	},
-	{
-		.name			= "badge4:green",
-		.default_trigger	= "cpu0",
-		.gpio			= 9,
-	},
-};
-
-static struct gpio_led_platform_data badge4_gpio_led_info = {
-	.leds		= badge4_gpio_leds,
-	.num_leds	= ARRAY_SIZE(badge4_gpio_leds),
-};
-
-static struct platform_device badge4_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &badge4_gpio_led_info,
-	}
-};
-
-static struct platform_device *devices[] __initdata = {
-	&sa1111_device,
-	&badge4_leds,
-};
-
-static int __init badge4_sa1111_init(void)
-{
-	/*
-	 * Ensure that the memory bus request/grant signals are setup,
-	 * and the grant is held in its inactive state
-	 */
-	sa1110_mb_disable();
-
-	/*
-	 * Probe for SA1111.
-	 */
-	return platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-
-/*
- * 1 x Intel 28F320C3 Advanced+ Boot Block Flash (32 Mi bit)
- *   Eight 4 KiW Parameter Bottom Blocks (64 KiB)
- *   Sixty-three 32 KiW Main Blocks (4032 Ki b)
- *
- * <or>
- *
- * 1 x Intel 28F640C3 Advanced+ Boot Block Flash (64 Mi bit)
- *   Eight 4 KiW Parameter Bottom Blocks (64 KiB)
- *   One-hundred-twenty-seven 32 KiW Main Blocks (8128 Ki b)
- */
-static struct mtd_partition badge4_partitions[] = {
-	{
-		.name	= "BLOB boot loader",
-		.offset	= 0,
-		.size	= 0x0000A000
-	}, {
-		.name	= "params",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 0x00006000
-	}, {
-		.name	= "root",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL
-	}
-};
-
-static struct flash_platform_data badge4_flash_data = {
-	.map_name	= "cfi_probe",
-	.parts		= badge4_partitions,
-	.nr_parts	= ARRAY_SIZE(badge4_partitions),
-};
-
-static struct resource badge4_flash_resource =
-	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_64M);
-
-static int five_v_on __initdata = 0;
-
-static int __init five_v_on_setup(char *ignore)
-{
-	five_v_on = 1;
-	return 1;
-}
-__setup("five_v_on", five_v_on_setup);
-
-
-static int __init badge4_init(void)
-{
-	int ret;
-
-	if (!machine_is_badge4())
-		return -ENODEV;
-
-	/* LCD */
-	GPCR  = (BADGE4_GPIO_LGP2 | BADGE4_GPIO_LGP3 |
-		 BADGE4_GPIO_LGP4 | BADGE4_GPIO_LGP5 |
-		 BADGE4_GPIO_LGP6 | BADGE4_GPIO_LGP7 |
-		 BADGE4_GPIO_LGP8 | BADGE4_GPIO_LGP9 |
-		 BADGE4_GPIO_GPA_VID | BADGE4_GPIO_GPB_VID |
-		 BADGE4_GPIO_GPC_VID);
-	GPDR &= ~BADGE4_GPIO_INT_VID;
-	GPDR |= (BADGE4_GPIO_LGP2 | BADGE4_GPIO_LGP3 |
-		 BADGE4_GPIO_LGP4 | BADGE4_GPIO_LGP5 |
-		 BADGE4_GPIO_LGP6 | BADGE4_GPIO_LGP7 |
-		 BADGE4_GPIO_LGP8 | BADGE4_GPIO_LGP9 |
-		 BADGE4_GPIO_GPA_VID | BADGE4_GPIO_GPB_VID |
-		 BADGE4_GPIO_GPC_VID);
-
-	/* SDRAM SPD i2c */
-	GPCR  = (BADGE4_GPIO_SDSDA | BADGE4_GPIO_SDSCL);
-	GPDR |= (BADGE4_GPIO_SDSDA | BADGE4_GPIO_SDSCL);
-
-	/* uart */
-	GPCR  = (BADGE4_GPIO_UART_HS1 | BADGE4_GPIO_UART_HS2);
-	GPDR |= (BADGE4_GPIO_UART_HS1 | BADGE4_GPIO_UART_HS2);
-
-	/* CPLD muxsel0 input for mux/adc chip select */
-	GPCR  = BADGE4_GPIO_MUXSEL0;
-	GPDR |= BADGE4_GPIO_MUXSEL0;
-
-	/* test points: J5, J6 as inputs, J7 outputs */
-	GPDR &= ~(BADGE4_GPIO_TESTPT_J5 | BADGE4_GPIO_TESTPT_J6);
-	GPCR  = BADGE4_GPIO_TESTPT_J7;
-	GPDR |= BADGE4_GPIO_TESTPT_J7;
-
-	/* 5V supply rail. */
-	GPCR  = BADGE4_GPIO_PCMEN5V;		/* initially off */
-	GPDR |= BADGE4_GPIO_PCMEN5V;
-
-	/* CPLD sdram type inputs; set up by blob */
-	//GPDR |= (BADGE4_GPIO_SDTYP1 | BADGE4_GPIO_SDTYP0);
-	printk(KERN_DEBUG __FILE__ ": SDRAM CPLD typ1=%d typ0=%d\n",
-		!!(GPLR & BADGE4_GPIO_SDTYP1),
-		!!(GPLR & BADGE4_GPIO_SDTYP0));
-
-	/* SA1111 reset pin; set up by blob */
-	//GPSR  = BADGE4_GPIO_SA1111_NRST;
-	//GPDR |= BADGE4_GPIO_SA1111_NRST;
-
-
-	/* power management cruft */
-	PGSR = 0;
-	PWER = 0;
-	PCFR = 0;
-	PSDR = 0;
-
-	PWER |= PWER_GPIO26;	/* wake up on an edge from TESTPT_J5 */
-	PWER |= PWER_RTC;	/* wake up if rtc fires */
-
-	/* drive sa1111_nrst during sleep */
-	PGSR |= BADGE4_GPIO_SA1111_NRST;
-	/* drive CPLD as is during sleep */
-	PGSR |= (GPLR & (BADGE4_GPIO_SDTYP0|BADGE4_GPIO_SDTYP1));
-
-
-	/* Now bring up the SA-1111. */
-	ret = badge4_sa1111_init();
-	if (ret < 0)
-		printk(KERN_ERR
-			"%s: SA-1111 initialization failed (%d)\n",
-			__func__, ret);
-
-
-	/* maybe turn on 5v0 from the start */
-	badge4_set_5V(BADGE4_5V_INITIALLY, five_v_on);
-
-	sa11x0_register_mtd(&badge4_flash_data, &badge4_flash_resource, 1);
-
-	return 0;
-}
-
-arch_initcall(badge4_init);
-
-
-static unsigned badge4_5V_bitmap = 0;
-
-void badge4_set_5V(unsigned subsystem, int on)
-{
-	unsigned long flags;
-	unsigned old_5V_bitmap;
-
-	local_irq_save(flags);
-
-	old_5V_bitmap = badge4_5V_bitmap;
-
-	if (on) {
-		badge4_5V_bitmap |= subsystem;
-	} else {
-		badge4_5V_bitmap &= ~subsystem;
-	}
-
-	/* detect on->off and off->on transitions */
-	if ((!old_5V_bitmap) && (badge4_5V_bitmap)) {
-		/* was off, now on */
-		printk(KERN_INFO "%s: enabling 5V supply rail\n", __func__);
-		GPSR = BADGE4_GPIO_PCMEN5V;
-	} else if ((old_5V_bitmap) && (!badge4_5V_bitmap)) {
-		/* was on, now off */
-		printk(KERN_INFO "%s: disabling 5V supply rail\n", __func__);
-		GPCR = BADGE4_GPIO_PCMEN5V;
-	}
-
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(badge4_set_5V);
-
-
-static struct map_desc badge4_io_desc[] __initdata = {
-	{	/* SRAM  bank 1 */
-		.virtual	= 0xf1000000,
-		.pfn		= __phys_to_pfn(0x08000000),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}, {	/* SRAM  bank 2 */
-		.virtual	= 0xf2000000,
-		.pfn		= __phys_to_pfn(0x10000000),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}
-};
-
-static void
-badge4_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
-{
-	if (!state) {
-		Ser1SDCR0 |= SDCR0_UART;
-	}
-}
-
-static struct sa1100_port_fns badge4_port_fns __initdata = {
-	.pm		= badge4_uart_pm,
-};
-
-static void __init badge4_map_io(void)
-{
-	sa1100_map_io();
-	iotable_init(badge4_io_desc, ARRAY_SIZE(badge4_io_desc));
-
-	sa1100_register_uart_fns(&badge4_port_fns);
-	sa1100_register_uart(0, 3);
-	sa1100_register_uart(1, 1);
-}
-
-MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4")
-	.atag_offset	= 0x100,
-	.map_io		= badge4_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= sa1100_init_irq,
-	.init_late	= sa11x0_init_late,
-	.init_time	= sa1100_timer_init,
-#ifdef CONFIG_SA1111
-	.dma_zone_size	= SZ_1M,
-#endif
-	.restart	= sa11x0_restart,
-MACHINE_END
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
deleted file mode 100644
index f9243a3fd69c..000000000000
--- a/arch/arm/mach-sa1100/cerf.c
+++ /dev/null
@@ -1,181 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-sa1100/cerf.c
- *
- * Apr-2003 : Removed some old PDA crud [FB]
- * Oct-2003 : Added uart2 resource [FB]
- * Jan-2004 : Removed io map for flash [FB]
- */
-
-#include <linux/init.h>
-#include <linux/gpio/machine.h>
-#include <linux/kernel.h>
-#include <linux/tty.h>
-#include <linux/platform_data/sa11x0-serial.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-
-#include <mach/cerf.h>
-#include <linux/platform_data/mfd-mcp-sa11x0.h>
-#include <mach/irqs.h>
-#include "generic.h"
-
-static struct resource cerfuart2_resources[] = {
-	[0] = DEFINE_RES_MEM(0x80030000, SZ_64K),
-};
-
-static struct platform_device cerfuart2_device = {
-	.name		= "sa11x0-uart",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(cerfuart2_resources),
-	.resource	= cerfuart2_resources,
-};
-
-/* Compact Flash */
-static struct gpiod_lookup_table cerf_cf_gpio_table = {
-	.dev_id = "sa11x0-pcmcia.1",
-	.table = {
-		GPIO_LOOKUP("gpio", 19, "bvd2", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio", 20, "bvd1", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio", 21, "reset", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio", 22, "ready", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio", 23, "detect", GPIO_ACTIVE_LOW),
-		{ },
-	},
-};
-
-/* LEDs */
-struct gpio_led cerf_gpio_leds[] = {
-	{
-		.name			= "cerf:d0",
-		.default_trigger	= "heartbeat",
-		.gpio			= 0,
-	},
-	{
-		.name			= "cerf:d1",
-		.default_trigger	= "cpu0",
-		.gpio			= 1,
-	},
-	{
-		.name			= "cerf:d2",
-		.default_trigger	= "default-on",
-		.gpio			= 2,
-	},
-	{
-		.name			= "cerf:d3",
-		.default_trigger	= "default-on",
-		.gpio			= 3,
-	},
-
-};
-
-static struct gpio_led_platform_data cerf_gpio_led_info = {
-	.leds		= cerf_gpio_leds,
-	.num_leds	= ARRAY_SIZE(cerf_gpio_leds),
-};
-
-static struct platform_device *cerf_devices[] __initdata = {
-	&cerfuart2_device,
-};
-
-#ifdef CONFIG_SA1100_CERF_FLASH_32MB
-#  define CERF_FLASH_SIZE	0x02000000
-#elif defined CONFIG_SA1100_CERF_FLASH_16MB
-#  define CERF_FLASH_SIZE	0x01000000
-#elif defined CONFIG_SA1100_CERF_FLASH_8MB
-#  define CERF_FLASH_SIZE	0x00800000
-#else
-#  error "Undefined flash size for CERF"
-#endif
-
-static struct mtd_partition cerf_partitions[] = {
-	{
-		.name		= "Bootloader",
-		.size		= 0x00020000,
-		.offset		= 0x00000000,
-	}, {
-		.name		= "Params",
-		.size		= 0x00040000,
-		.offset		= 0x00020000,
-	}, {
-		.name		= "Kernel",
-		.size		= 0x00100000,
-		.offset		= 0x00060000,
-	}, {
-		.name		= "Filesystem",
-		.size		= CERF_FLASH_SIZE-0x00160000,
-		.offset		= 0x00160000,
-	}
-};
-
-static struct flash_platform_data cerf_flash_data = {
-	.map_name	= "cfi_probe",
-	.parts		= cerf_partitions,
-	.nr_parts	= ARRAY_SIZE(cerf_partitions),
-};
-
-static struct resource cerf_flash_resource =
-	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M);
-
-static void __init cerf_init_irq(void)
-{
-	sa1100_init_irq();
-	irq_set_irq_type(CERF_ETH_IRQ, IRQ_TYPE_EDGE_RISING);
-}
-
-static struct map_desc cerf_io_desc[] __initdata = {
-  	{	/* Crystal Ethernet Chip */
-		.virtual	=  0xf0000000,
-		.pfn		= __phys_to_pfn(0x08000000),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init cerf_map_io(void)
-{
-	sa1100_map_io();
-	iotable_init(cerf_io_desc, ARRAY_SIZE(cerf_io_desc));
-
-	sa1100_register_uart(0, 3);
-	sa1100_register_uart(1, 2); /* disable this and the uart2 device for sa1100_fir */
-	sa1100_register_uart(2, 1);
-}
-
-static struct mcp_plat_data cerf_mcp_data = {
-	.mccr0		= MCCR0_ADM,
-	.sclk_rate	= 11981000,
-};
-
-static void __init cerf_init(void)
-{
-	sa11x0_ppc_configure_mcp();
-	platform_add_devices(cerf_devices, ARRAY_SIZE(cerf_devices));
-	gpio_led_register_device(-1, &cerf_gpio_led_info);
-	sa11x0_register_mtd(&cerf_flash_data, &cerf_flash_resource, 1);
-	sa11x0_register_mcp(&cerf_mcp_data);
-	sa11x0_register_pcmcia(1, &cerf_cf_gpio_table);
-}
-
-MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube")
-	/* Maintainer: support@intrinsyc.com */
-	.map_io		= cerf_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= cerf_init_irq,
-	.init_time	= sa1100_timer_init,
-	.init_machine	= cerf_init,
-	.init_late	= sa11x0_init_late,
-	.restart	= sa11x0_restart,
-MACHINE_END
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 14c33ed05318..466d755d5702 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -44,7 +44,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
-#include <linux/platform_data/irda-sa11x0.h>
 
 #include <asm/hardware/scoop.h>
 #include <asm/mach/sharpsl_param.h>
@@ -118,37 +117,6 @@ static struct gpiod_lookup_table collie_battery_gpiod_table = {
 	},
 };
 
-static int collie_ir_startup(struct device *dev)
-{
-	int rc = gpio_request(COLLIE_GPIO_IR_ON, "IrDA");
-	if (rc)
-		return rc;
-	rc = gpio_direction_output(COLLIE_GPIO_IR_ON, 1);
-
-	if (!rc)
-		return 0;
-
-	gpio_free(COLLIE_GPIO_IR_ON);
-	return rc;
-}
-
-static void collie_ir_shutdown(struct device *dev)
-{
-	gpio_free(COLLIE_GPIO_IR_ON);
-}
-
-static int collie_ir_set_power(struct device *dev, unsigned int state)
-{
-	gpio_set_value(COLLIE_GPIO_IR_ON, !state);
-	return 0;
-}
-
-static struct irda_platform_data collie_ir_data = {
-	.startup = collie_ir_startup,
-	.shutdown = collie_ir_shutdown,
-	.set_power = collie_ir_set_power,
-};
-
 /*
  * Collie AC IN
  */
@@ -420,7 +388,6 @@ static void __init collie_init(void)
 	sa11x0_register_mtd(&collie_flash_data, collie_flash_resources,
 			    ARRAY_SIZE(collie_flash_resources));
 	sa11x0_register_mcp(&collie_mcp_data);
-	sa11x0_register_irda(&collie_ir_data);
 
 	sharpsl_save_param();
 }
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 6c21f214cd60..0c586047d130 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -250,25 +250,6 @@ void sa11x0_register_mtd(struct flash_platform_data *flash,
 	sa11x0_register_device(&sa11x0mtd_device, flash);
 }
 
-static struct resource sa11x0ir_resources[] = {
-	DEFINE_RES_MEM(__PREG(Ser2UTCR0), 0x24),
-	DEFINE_RES_MEM(__PREG(Ser2HSCR0), 0x1c),
-	DEFINE_RES_MEM(__PREG(Ser2HSCR2), 0x04),
-	DEFINE_RES_IRQ(IRQ_Ser2ICP),
-};
-
-static struct platform_device sa11x0ir_device = {
-	.name		= "sa11x0-ir",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sa11x0ir_resources),
-	.resource	= sa11x0ir_resources,
-};
-
-void sa11x0_register_irda(struct irda_platform_data *irda)
-{
-	sa11x0_register_device(&sa11x0ir_device, irda);
-}
-
 static struct resource sa1100_rtc_resources[] = {
 	DEFINE_RES_MEM(0x90010000, 0x40),
 	DEFINE_RES_IRQ_NAMED(IRQ_RTC1Hz, "rtc 1Hz"),
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index 158a4fd5ca24..5fe0d4fc0f8c 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -30,9 +30,6 @@ struct resource;
 void sa11x0_register_mtd(struct flash_platform_data *flash,
 			 struct resource *res, int nr);
 
-struct irda_platform_data;
-void sa11x0_register_irda(struct irda_platform_data *irda);
-
 struct mcp_plat_data;
 void sa11x0_ppc_configure_mcp(void);
 void sa11x0_register_mcp(struct mcp_plat_data *data);
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
deleted file mode 100644
index 51eaeeaf3f10..000000000000
--- a/arch/arm/mach-sa1100/h3100.c
+++ /dev/null
@@ -1,140 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Support for Compaq iPAQ H3100 handheld computer
- *
- * Copyright (c) 2000,1 Compaq Computer Corporation. (Author: Jamey Hicks)
- * Copyright (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-
-#include <video/sa1100fb.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <linux/platform_data/irda-sa11x0.h>
-
-#include <mach/h3xxx.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-
-/*
- * helper for sa1100fb
- */
-static struct gpio h3100_lcd_gpio[] = {
-	{ H3100_GPIO_LCD_3V_ON, GPIOF_OUT_INIT_LOW, "LCD 3V" },
-	{ H3XXX_EGPIO_LCD_ON, GPIOF_OUT_INIT_LOW, "LCD ON" },
-};
-
-static bool h3100_lcd_request(void)
-{
-	static bool h3100_lcd_ok;
-	int rc;
-
-	if (h3100_lcd_ok)
-		return true;
-
-	rc = gpio_request_array(h3100_lcd_gpio, ARRAY_SIZE(h3100_lcd_gpio));
-	if (rc)
-		pr_err("%s: can't request GPIOs\n", __func__);
-	else
-		h3100_lcd_ok = true;
-
-	return h3100_lcd_ok;
-}
-
-static void h3100_lcd_power(int enable)
-{
-	if (!h3100_lcd_request())
-		return;
-
-	gpio_set_value(H3100_GPIO_LCD_3V_ON, enable);
-	gpio_set_value(H3XXX_EGPIO_LCD_ON, enable);
-}
-
-static struct sa1100fb_mach_info h3100_lcd_info = {
-	.pixclock	= 406977, 	.bpp		= 4,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 26,		.vsync_len	= 41,
-	.left_margin	= 4,		.upper_margin	= 0,
-	.right_margin	= 4,		.lower_margin	= 0,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-	.cmap_greyscale	= 1,
-	.cmap_inverse	= 1,
-
-	.lccr0		= LCCR0_Mono | LCCR0_4PixMono | LCCR0_Sngl | LCCR0_Pas,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-
-	.lcd_power = h3100_lcd_power,
-};
-
-static void __init h3100_map_io(void)
-{
-	h3xxx_map_io();
-
-	/* Older bootldrs put GPIO2-9 in alternate mode on the
-	   assumption that they are used for video */
-	GAFR &= ~0x000001fb;
-}
-
-/*
- * This turns the IRDA power on or off on the Compaq H3100
- */
-static struct gpio h3100_irda_gpio[] = {
-	{ H3100_GPIO_IR_ON,	GPIOF_OUT_INIT_LOW, "IrDA power" },
-	{ H3100_GPIO_IR_FSEL,	GPIOF_OUT_INIT_LOW, "IrDA fsel" },
-};
-
-static int h3100_irda_set_power(struct device *dev, unsigned int state)
-{
-	gpio_set_value(H3100_GPIO_IR_ON, state);
-	return 0;
-}
-
-static void h3100_irda_set_speed(struct device *dev, unsigned int speed)
-{
-	gpio_set_value(H3100_GPIO_IR_FSEL, !(speed < 4000000));
-}
-
-static int h3100_irda_startup(struct device *dev)
-{
-	return gpio_request_array(h3100_irda_gpio, sizeof(h3100_irda_gpio));
-}
-
-static void h3100_irda_shutdown(struct device *dev)
-{
-	return gpio_free_array(h3100_irda_gpio, sizeof(h3100_irda_gpio));
-}
-
-static struct irda_platform_data h3100_irda_data = {
-	.set_power	= h3100_irda_set_power,
-	.set_speed	= h3100_irda_set_speed,
-	.startup	= h3100_irda_startup,
-	.shutdown	= h3100_irda_shutdown,
-};
-
-static void __init h3100_mach_init(void)
-{
-	h3xxx_mach_init();
-
-	sa11x0_register_pcmcia(-1, NULL);
-	sa11x0_register_lcd(&h3100_lcd_info);
-	sa11x0_register_irda(&h3100_irda_data);
-}
-
-MACHINE_START(H3100, "Compaq iPAQ H3100")
-	.atag_offset	= 0x100,
-	.map_io		= h3100_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= sa1100_init_irq,
-	.init_time	= sa1100_timer_init,
-	.init_machine	= h3100_mach_init,
-	.init_late	= sa11x0_init_late,
-	.restart	= sa11x0_restart,
-MACHINE_END
-
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index baf529117b26..5e25dfa752e9 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -14,7 +14,6 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <linux/platform_data/irda-sa11x0.h>
 
 #include <mach/h3xxx.h>
 #include <mach/irqs.h>
@@ -90,48 +89,11 @@ static void __init h3600_map_io(void)
 	h3xxx_map_io();
 }
 
-/*
- * This turns the IRDA power on or off on the Compaq H3600
- */
-static struct gpio h3600_irda_gpio[] = {
-	{ H3600_EGPIO_IR_ON,	GPIOF_OUT_INIT_LOW, "IrDA power" },
-	{ H3600_EGPIO_IR_FSEL,	GPIOF_OUT_INIT_LOW, "IrDA fsel" },
-};
-
-static int h3600_irda_set_power(struct device *dev, unsigned int state)
-{
-	gpio_set_value(H3600_EGPIO_IR_ON, state);
-	return 0;
-}
-
-static void h3600_irda_set_speed(struct device *dev, unsigned int speed)
-{
-	gpio_set_value(H3600_EGPIO_IR_FSEL, !(speed < 4000000));
-}
-
-static int h3600_irda_startup(struct device *dev)
-{
-	return gpio_request_array(h3600_irda_gpio, sizeof(h3600_irda_gpio));
-}
-
-static void h3600_irda_shutdown(struct device *dev)
-{
-	return gpio_free_array(h3600_irda_gpio, sizeof(h3600_irda_gpio));
-}
-
-static struct irda_platform_data h3600_irda_data = {
-	.set_power	= h3600_irda_set_power,
-	.set_speed	= h3600_irda_set_speed,
-	.startup	= h3600_irda_startup,
-	.shutdown	= h3600_irda_shutdown,
-};
-
 static void __init h3600_mach_init(void)
 {
 	h3xxx_mach_init();
 
 	sa11x0_register_lcd(&h3600_lcd_info);
-	sa11x0_register_irda(&h3600_irda_data);
 }
 
 MACHINE_START(H3600, "Compaq iPAQ H3600")
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
deleted file mode 100644
index 3085f1c2e586..000000000000
--- a/arch/arm/mach-sa1100/hackkit.c
+++ /dev/null
@@ -1,184 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-sa1100/hackkit.c
- *
- * Copyright (C) 2002 Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>
- *
- * This file contains all HackKit tweaks. Based on original work from
- * Nicolas Pitre's assabet fixes
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/tty.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/cpufreq.h>
-#include <linux/platform_data/sa11x0-serial.h>
-#include <linux/serial_core.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/tty.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-#include <linux/pgtable.h>
-
-#include <asm/mach-types.h>
-#include <asm/setup.h>
-#include <asm/page.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-
-/**********************************************************************
- *  prototypes
- */
-
-/* init funcs */
-static void __init hackkit_map_io(void);
-
-static void hackkit_uart_pm(struct uart_port *port, u_int state, u_int oldstate);
-
-/**********************************************************************
- *  global data
- */
-
-/**********************************************************************
- *  static data
- */
-
-static struct map_desc hackkit_io_desc[] __initdata = {
-	{	/* Flash bank 0 */
-		.virtual	=  0xe8000000,
-		.pfn		= __phys_to_pfn(0x00000000),
-		.length		= 0x01000000,
-		.type		= MT_DEVICE
-	},
-};
-
-static struct sa1100_port_fns hackkit_port_fns __initdata = {
-	.pm		= hackkit_uart_pm,
-};
-
-/**********************************************************************
- *  Static functions
- */
-
-static void __init hackkit_map_io(void)
-{
-	sa1100_map_io();
-	iotable_init(hackkit_io_desc, ARRAY_SIZE(hackkit_io_desc));
-
-	sa1100_register_uart_fns(&hackkit_port_fns);
-	sa1100_register_uart(0, 1);	/* com port */
-	sa1100_register_uart(1, 2);
-	sa1100_register_uart(2, 3);	/* radio module */
-
-	Ser1SDCR0 |= SDCR0_SUS;
-}
-
-/**
- *	hackkit_uart_pm - powermgmt callback function for system 3 UART
- *	@port: uart port structure
- *	@state: pm state
- *	@oldstate: old pm state
- *
- */
-static void hackkit_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
-{
-	/* TODO: switch on/off uart in powersave mode */
-}
-
-static struct mtd_partition hackkit_partitions[] = {
-	{
-		.name		= "BLOB",
-		.size		= 0x00040000,
-		.offset		= 0x00000000,
-		.mask_flags	= MTD_WRITEABLE,  /* force read-only */
-	}, {
-		.name		= "config",
-		.size		= 0x00040000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "kernel",
-		.size		= 0x00100000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "initrd",
-		.size		= 0x00180000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "rootfs",
-		.size		= 0x700000,
-		.offset		= MTDPART_OFS_APPEND,
-	}, {
-		.name		= "data",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= MTDPART_OFS_APPEND,
-	}
-};
-
-static struct flash_platform_data hackkit_flash_data = {
-	.map_name	= "cfi_probe",
-	.parts		= hackkit_partitions,
-	.nr_parts	= ARRAY_SIZE(hackkit_partitions),
-};
-
-static struct resource hackkit_flash_resource =
-	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M);
-
-/* LEDs */
-struct gpio_led hackkit_gpio_leds[] = {
-	{
-		.name			= "hackkit:red",
-		.default_trigger	= "cpu0",
-		.gpio			= 22,
-	},
-	{
-		.name			= "hackkit:green",
-		.default_trigger	= "heartbeat",
-		.gpio			= 23,
-	},
-};
-
-static struct gpio_led_platform_data hackkit_gpio_led_info = {
-	.leds		= hackkit_gpio_leds,
-	.num_leds	= ARRAY_SIZE(hackkit_gpio_leds),
-};
-
-static struct platform_device hackkit_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &hackkit_gpio_led_info,
-	}
-};
-
-static void __init hackkit_init(void)
-{
-	sa11x0_register_mtd(&hackkit_flash_data, &hackkit_flash_resource, 1);
-	platform_device_register(&hackkit_leds);
-}
-
-/**********************************************************************
- *  Exported Functions
- */
-
-MACHINE_START(HACKKIT, "HackKit Cpu Board")
-	.atag_offset	= 0x100,
-	.map_io		= hackkit_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= sa1100_init_irq,
-	.init_time	= sa1100_timer_init,
-	.init_machine	= hackkit_init,
-	.init_late	= sa11x0_init_late,
-	.restart	= sa11x0_restart,
-MACHINE_END
diff --git a/arch/arm/mach-sa1100/include/mach/badge4.h b/arch/arm/mach-sa1100/include/mach/badge4.h
deleted file mode 100644
index 90e744a54ed5..000000000000
--- a/arch/arm/mach-sa1100/include/mach/badge4.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-sa1100/include/mach/badge4.h
- *
- *   Tim Connors <connors@hpl.hp.com>
- *   Christopher Hoover <ch@hpl.hp.com>
- *
- * Copyright (C) 2002 Hewlett-Packard Company
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#error "include <mach/hardware.h> instead"
-#endif
-
-#define BADGE4_SA1111_BASE		(0x48000000)
-
-/* GPIOs on the BadgePAD 4 */
-#define BADGE4_GPIO_INT_1111		GPIO_GPIO0   /* SA-1111 IRQ */
-
-#define BADGE4_GPIO_INT_VID		GPIO_GPIO1   /* Video expansion */
-#define BADGE4_GPIO_LGP2		GPIO_GPIO2   /* GPIO_LDD8 */
-#define BADGE4_GPIO_LGP3		GPIO_GPIO3   /* GPIO_LDD9 */
-#define BADGE4_GPIO_LGP4		GPIO_GPIO4   /* GPIO_LDD10 */
-#define BADGE4_GPIO_LGP5		GPIO_GPIO5   /* GPIO_LDD11 */
-#define BADGE4_GPIO_LGP6		GPIO_GPIO6   /* GPIO_LDD12 */
-#define BADGE4_GPIO_LGP7		GPIO_GPIO7   /* GPIO_LDD13 */
-#define BADGE4_GPIO_LGP8		GPIO_GPIO8   /* GPIO_LDD14 */
-#define BADGE4_GPIO_LGP9		GPIO_GPIO9   /* GPIO_LDD15 */
-#define BADGE4_GPIO_GPA_VID		GPIO_GPIO10  /* Video expansion */
-#define BADGE4_GPIO_GPB_VID		GPIO_GPIO11  /* Video expansion */
-#define BADGE4_GPIO_GPC_VID		GPIO_GPIO12  /* Video expansion */
-
-#define BADGE4_GPIO_UART_HS1		GPIO_GPIO13
-#define BADGE4_GPIO_UART_HS2		GPIO_GPIO14
-
-#define BADGE4_GPIO_MUXSEL0		GPIO_GPIO15
-#define BADGE4_GPIO_TESTPT_J7		GPIO_GPIO16
-
-#define BADGE4_GPIO_SDSDA		GPIO_GPIO17  /* SDRAM SPD Data */
-#define BADGE4_GPIO_SDSCL		GPIO_GPIO18  /* SDRAM SPD Clock */
-#define BADGE4_GPIO_SDTYP0		GPIO_GPIO19  /* SDRAM Type Control */
-#define BADGE4_GPIO_SDTYP1		GPIO_GPIO20  /* SDRAM Type Control */
-
-#define BADGE4_GPIO_BGNT_1111		GPIO_GPIO21  /* GPIO_MBGNT */
-#define BADGE4_GPIO_BREQ_1111		GPIO_GPIO22  /* GPIO_TREQA */
-
-#define BADGE4_GPIO_TESTPT_J6		GPIO_GPIO23
-
-#define BADGE4_GPIO_PCMEN5V		GPIO_GPIO24  /* 5V power */
-
-#define BADGE4_GPIO_SA1111_NRST		GPIO_GPIO25  /* SA-1111 nRESET */
-
-#define BADGE4_GPIO_TESTPT_J5		GPIO_GPIO26
-
-#define BADGE4_GPIO_CLK_1111		GPIO_GPIO27  /* GPIO_32_768kHz */
-
-/* Interrupts on the BadgePAD 4 */
-#define BADGE4_IRQ_GPIO_SA1111		IRQ_GPIO0    /* SA-1111 interrupt */
-
-
-/* PCM5ENV Usage tracking */
-
-#define BADGE4_5V_PCMCIA_SOCK0		(1<<0)
-#define BADGE4_5V_PCMCIA_SOCK1		(1<<1)
-#define BADGE4_5V_PCMCIA_SOCK(n)	(1<<(n))
-#define BADGE4_5V_USB			(1<<2)
-#define BADGE4_5V_INITIALLY		(1<<3)
-
-#ifndef __ASSEMBLY__
-extern void badge4_set_5V(unsigned subsystem, int on);
-#endif
diff --git a/arch/arm/mach-sa1100/include/mach/cerf.h b/arch/arm/mach-sa1100/include/mach/cerf.h
deleted file mode 100644
index 59c185ebd494..000000000000
--- a/arch/arm/mach-sa1100/include/mach/cerf.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-sa1100/include/mach/cerf.h
- *
- * Apr-2003 : Removed some old PDA crud [FB]
- */
-#ifndef _INCLUDE_CERF_H_
-#define _INCLUDE_CERF_H_
-
-
-#define CERF_ETH_IO			0xf0000000
-#define CERF_ETH_IRQ IRQ_GPIO26
-
-#define CERF_GPIO_CF_BVD2		19
-#define CERF_GPIO_CF_BVD1		20
-#define CERF_GPIO_CF_RESET		21
-#define CERF_GPIO_CF_IRQ		22
-#define CERF_GPIO_CF_CD			23
-
-#endif // _INCLUDE_CERF_H_
diff --git a/arch/arm/mach-sa1100/include/mach/nanoengine.h b/arch/arm/mach-sa1100/include/mach/nanoengine.h
deleted file mode 100644
index 8d5ee1438956..000000000000
--- a/arch/arm/mach-sa1100/include/mach/nanoengine.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-sa1100/include/mach/nanoengine.h
- *
- * This file contains the hardware specific definitions for nanoEngine.
- * Only include this file from SA1100-specific files.
- *
- * Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
- */
-#ifndef __ASM_ARCH_NANOENGINE_H
-#define __ASM_ARCH_NANOENGINE_H
-
-#include <mach/irqs.h>
-
-#define GPIO_PC_READY0	11 /* ready for socket 0 (active high)*/
-#define GPIO_PC_READY1	12 /* ready for socket 1 (active high) */
-#define GPIO_PC_CD0	13 /* detect for socket 0 (active low) */
-#define GPIO_PC_CD1	14 /* detect for socket 1 (active low) */
-#define GPIO_PC_RESET0	15 /* reset socket 0 */
-#define GPIO_PC_RESET1	16 /* reset socket 1 */
-
-#define NANOENGINE_IRQ_GPIO_PCI		IRQ_GPIO0
-#define NANOENGINE_IRQ_GPIO_PC_READY0	IRQ_GPIO11
-#define NANOENGINE_IRQ_GPIO_PC_READY1	IRQ_GPIO12
-#define NANOENGINE_IRQ_GPIO_PC_CD0	IRQ_GPIO13
-#define NANOENGINE_IRQ_GPIO_PC_CD1	IRQ_GPIO14
-
-/*
- * nanoEngine Memory Map:
- *
- * 0000.0000 - 003F.0000 -   4 MB Flash
- * C000.0000 - C1FF.FFFF -  32 MB SDRAM
- * 1860.0000 - 186F.FFFF -   1 MB Internal PCI Memory Read/Write
- * 18A1.0000 - 18A1.FFFF -  64 KB Internal PCI Config Space
- * 4000.0000 - 47FF.FFFF - 128 MB External Bus I/O - Multiplexed Mode
- * 4800.0000 - 4FFF.FFFF - 128 MB External Bus I/O - Non-Multiplexed Mode
- *
- */
-
-#define NANO_PCI_MEM_RW_PHYS		0x18600000
-#define NANO_PCI_MEM_RW_VIRT		0xf1000000
-#define NANO_PCI_MEM_RW_SIZE		SZ_1M
-#define NANO_PCI_CONFIG_SPACE_PHYS	0x18A10000
-#define NANO_PCI_CONFIG_SPACE_VIRT	0xf2000000
-#define NANO_PCI_CONFIG_SPACE_SIZE	SZ_64K
-
-#endif
-
diff --git a/arch/arm/mach-sa1100/include/mach/shannon.h b/arch/arm/mach-sa1100/include/mach/shannon.h
deleted file mode 100644
index d830375f329c..000000000000
--- a/arch/arm/mach-sa1100/include/mach/shannon.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _INCLUDE_SHANNON_H
-#define _INCLUDE_SHANNON_H
-
-/* taken from comp.os.inferno Tue, 12 Sep 2000 09:21:50 GMT,
- * written by <forsyth@vitanuova.com> */
-
-#define SHANNON_GPIO_SPI_FLASH		GPIO_GPIO (0)	/* Output - Driven low, enables SPI to flash */
-#define SHANNON_GPIO_SPI_DSP		GPIO_GPIO (1)	/* Output - Driven low, enables SPI to DSP */
-/* lcd lower = GPIO 2-9 */
-#define SHANNON_GPIO_SPI_OUTPUT		GPIO_GPIO (10)	/* Output - SPI output to DSP */
-#define SHANNON_GPIO_SPI_INPUT		GPIO_GPIO (11)	/* Input  - SPI input from DSP */
-#define SHANNON_GPIO_SPI_CLOCK		GPIO_GPIO (12)	/* Output - Clock for SPI */
-#define SHANNON_GPIO_SPI_FRAME		GPIO_GPIO (13)	/* Output - Frame marker - not used */
-#define SHANNON_GPIO_SPI_RTS		GPIO_GPIO (14)	/* Input  - SPI Ready to Send */
-#define SHANNON_IRQ_GPIO_SPI_RTS	IRQ_GPIO14
-#define SHANNON_GPIO_SPI_CTS		GPIO_GPIO (15)	/* Output - SPI Clear to Send */
-#define SHANNON_GPIO_IRQ_CODEC		GPIO_GPIO (16)	/* in, irq from ucb1200 */
-#define SHANNON_IRQ_GPIO_IRQ_CODEC	IRQ_GPIO16
-#define SHANNON_GPIO_DSP_RESET		GPIO_GPIO (17)	/* Output - Drive low to reset the DSP */
-#define SHANNON_GPIO_CODEC_RESET	GPIO_GPIO (18)	/* Output - Drive low to reset the UCB1x00 */
-#define SHANNON_GPIO_U3_RTS		GPIO_GPIO (19)	/* ?? */
-#define SHANNON_GPIO_U3_CTS		GPIO_GPIO (20)	/* ?? */
-#define SHANNON_GPIO_SENSE_12V		GPIO_GPIO (21)	/* Input, 12v flash unprotect detected */
-#define SHANNON_GPIO_DISP_EN		22		/* out */
-/* XXX GPIO 23 unaccounted for */
-#define SHANNON_GPIO_EJECT_0		24		/* in */
-#define SHANNON_GPIO_EJECT_1		25		/* in */
-#define SHANNON_GPIO_RDY_0		26		/* in */
-#define SHANNON_GPIO_RDY_1		27		/* in */
-
-/* MCP UCB codec GPIO pins... */
-
-#define SHANNON_UCB_GPIO_BACKLIGHT	9
-#define SHANNON_UCB_GPIO_BRIGHT_MASK  	7
-#define SHANNON_UCB_GPIO_BRIGHT		6
-#define SHANNON_UCB_GPIO_CONTRAST_MASK	0x3f
-#define SHANNON_UCB_GPIO_CONTRAST	0
-
-#endif
diff --git a/arch/arm/mach-sa1100/include/mach/simpad.h b/arch/arm/mach-sa1100/include/mach/simpad.h
deleted file mode 100644
index d53d680de3d9..000000000000
--- a/arch/arm/mach-sa1100/include/mach/simpad.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-sa1100/include/mach/simpad.h
- *
- * based of assabet.h same as HUW_Webpanel
- *
- * This file contains the hardware specific definitions for SIMpad
- *
- * 2001/05/14 Juergen Messerer <juergen.messerer@freesurf.ch>
- */
-
-#ifndef __ASM_ARCH_SIMPAD_H
-#define __ASM_ARCH_SIMPAD_H
-
-
-#define GPIO_UART1_RTS	GPIO_GPIO14
-#define GPIO_UART1_DTR	GPIO_GPIO7
-#define GPIO_UART1_CTS	GPIO_GPIO8
-#define GPIO_UART1_DCD	GPIO_GPIO23
-#define GPIO_UART1_DSR	GPIO_GPIO6
-
-#define GPIO_UART3_RTS	GPIO_GPIO12
-#define GPIO_UART3_DTR	GPIO_GPIO16
-#define GPIO_UART3_CTS	GPIO_GPIO13
-#define GPIO_UART3_DCD	GPIO_GPIO18
-#define GPIO_UART3_DSR	GPIO_GPIO17
-
-#define GPIO_POWER_BUTTON	GPIO_GPIO0
-#define GPIO_UCB1300_IRQ	GPIO_GPIO22	/* UCB GPIO and touchscreen */
-
-#define IRQ_UART1_CTS	IRQ_GPIO15
-#define IRQ_UART1_DCD	GPIO_GPIO23
-#define IRQ_UART1_DSR	GPIO_GPIO6
-#define IRQ_UART3_CTS	GPIO_GPIO13
-#define IRQ_UART3_DCD	GPIO_GPIO18
-#define IRQ_UART3_DSR	GPIO_GPIO17
-
-#define IRQ_GPIO_UCB1300_IRQ IRQ_GPIO22
-#define IRQ_GPIO_POWER_BUTTON IRQ_GPIO0
-
-
-/*---  PCMCIA  ---*/
-#define GPIO_CF_CD              24
-#define GPIO_CF_IRQ             1
-
-/*--- SmartCard ---*/
-#define GPIO_SMART_CARD		GPIO_GPIO10
-#define IRQ_GPIO_SMARD_CARD	IRQ_GPIO10
-
-/*--- ucb1x00 GPIO ---*/
-#define SIMPAD_UCB1X00_GPIO_BASE	(GPIO_MAX + 1)
-#define SIMPAD_UCB1X00_GPIO_PROG1	(SIMPAD_UCB1X00_GPIO_BASE)
-#define SIMPAD_UCB1X00_GPIO_PROG2	(SIMPAD_UCB1X00_GPIO_BASE + 1)
-#define SIMPAD_UCB1X00_GPIO_UP		(SIMPAD_UCB1X00_GPIO_BASE + 2)
-#define SIMPAD_UCB1X00_GPIO_DOWN	(SIMPAD_UCB1X00_GPIO_BASE + 3)
-#define SIMPAD_UCB1X00_GPIO_LEFT	(SIMPAD_UCB1X00_GPIO_BASE + 4)
-#define SIMPAD_UCB1X00_GPIO_RIGHT	(SIMPAD_UCB1X00_GPIO_BASE + 5)
-#define SIMPAD_UCB1X00_GPIO_6		(SIMPAD_UCB1X00_GPIO_BASE + 6)
-#define SIMPAD_UCB1X00_GPIO_7		(SIMPAD_UCB1X00_GPIO_BASE + 7)
-#define SIMPAD_UCB1X00_GPIO_HEADSET	(SIMPAD_UCB1X00_GPIO_BASE + 8)
-#define SIMPAD_UCB1X00_GPIO_SPEAKER	(SIMPAD_UCB1X00_GPIO_BASE + 9)
-
-/*--- CS3 Latch ---*/
-#define SIMPAD_CS3_GPIO_BASE		(GPIO_MAX + 11)
-#define SIMPAD_CS3_VCC_5V_EN		(SIMPAD_CS3_GPIO_BASE)
-#define SIMPAD_CS3_VCC_3V_EN		(SIMPAD_CS3_GPIO_BASE + 1)
-#define SIMPAD_CS3_EN1			(SIMPAD_CS3_GPIO_BASE + 2)
-#define SIMPAD_CS3_EN0			(SIMPAD_CS3_GPIO_BASE + 3)
-#define SIMPAD_CS3_DISPLAY_ON		(SIMPAD_CS3_GPIO_BASE + 4)
-#define SIMPAD_CS3_PCMCIA_BUFF_DIS	(SIMPAD_CS3_GPIO_BASE + 5)
-#define SIMPAD_CS3_MQ_RESET		(SIMPAD_CS3_GPIO_BASE + 6)
-#define SIMPAD_CS3_PCMCIA_RESET		(SIMPAD_CS3_GPIO_BASE + 7)
-#define SIMPAD_CS3_DECT_POWER_ON	(SIMPAD_CS3_GPIO_BASE + 8)
-#define SIMPAD_CS3_IRDA_SD		(SIMPAD_CS3_GPIO_BASE + 9)
-#define SIMPAD_CS3_RS232_ON		(SIMPAD_CS3_GPIO_BASE + 10)
-#define SIMPAD_CS3_SD_MEDIAQ		(SIMPAD_CS3_GPIO_BASE + 11)
-#define SIMPAD_CS3_LED2_ON		(SIMPAD_CS3_GPIO_BASE + 12)
-#define SIMPAD_CS3_IRDA_MODE		(SIMPAD_CS3_GPIO_BASE + 13)
-#define SIMPAD_CS3_ENABLE_5V		(SIMPAD_CS3_GPIO_BASE + 14)
-#define SIMPAD_CS3_RESET_SIMCARD	(SIMPAD_CS3_GPIO_BASE + 15)
-
-#define SIMPAD_CS3_PCMCIA_BVD1		(SIMPAD_CS3_GPIO_BASE + 16)
-#define SIMPAD_CS3_PCMCIA_BVD2		(SIMPAD_CS3_GPIO_BASE + 17)
-#define SIMPAD_CS3_PCMCIA_VS1		(SIMPAD_CS3_GPIO_BASE + 18)
-#define SIMPAD_CS3_PCMCIA_VS2		(SIMPAD_CS3_GPIO_BASE + 19)
-#define SIMPAD_CS3_LOCK_IND		(SIMPAD_CS3_GPIO_BASE + 20)
-#define SIMPAD_CS3_CHARGING_STATE	(SIMPAD_CS3_GPIO_BASE + 21)
-#define SIMPAD_CS3_PCMCIA_SHORT		(SIMPAD_CS3_GPIO_BASE + 22)
-#define SIMPAD_CS3_GPIO_23		(SIMPAD_CS3_GPIO_BASE + 23)
-
-#define CS3_BASE        IOMEM(0xf1000000)
-
-long simpad_get_cs3_ro(void);
-long simpad_get_cs3_shadow(void);
-void simpad_set_cs3_bit(int value);
-void simpad_clear_cs3_bit(int value);
-
-#define VCC_5V_EN	0x0001 /* For 5V PCMCIA */
-#define VCC_3V_EN	0x0002 /* FOR 3.3V PCMCIA */
-#define EN1		0x0004 /* This is only for EPROM's */
-#define EN0		0x0008 /* Both should be enable for 3.3V or 5V */
-#define DISPLAY_ON	0x0010
-#define PCMCIA_BUFF_DIS	0x0020
-#define MQ_RESET	0x0040
-#define PCMCIA_RESET	0x0080
-#define DECT_POWER_ON	0x0100
-#define IRDA_SD		0x0200 /* Shutdown for powersave */
-#define RS232_ON	0x0400
-#define SD_MEDIAQ	0x0800 /* Shutdown for powersave */
-#define LED2_ON		0x1000
-#define IRDA_MODE	0x2000 /* Fast/Slow IrDA mode */
-#define ENABLE_5V	0x4000 /* Enable 5V circuit */
-#define RESET_SIMCARD	0x8000
-
-#define PCMCIA_BVD1	0x01
-#define PCMCIA_BVD2	0x02
-#define PCMCIA_VS1	0x04
-#define PCMCIA_VS2	0x08
-#define LOCK_IND	0x10
-#define CHARGING_STATE	0x20
-#define PCMCIA_SHORT	0x40
-
-/*--- Battery ---*/
-struct simpad_battery {
-	unsigned char ac_status;	/* line connected yes/no */
-	unsigned char status;		/* battery loading yes/no */
-	unsigned char percentage;	/* percentage loaded */
-	unsigned short life;		/* life till empty */
-};
-
-/* These should match the apm_bios.h definitions */
-#define SIMPAD_AC_STATUS_AC_OFFLINE      0x00
-#define SIMPAD_AC_STATUS_AC_ONLINE       0x01
-#define SIMPAD_AC_STATUS_AC_BACKUP       0x02   /* What does this mean? */
-#define SIMPAD_AC_STATUS_AC_UNKNOWN      0xff
-
-/* These bitfields are rarely "or'd" together */
-#define SIMPAD_BATT_STATUS_HIGH          0x01
-#define SIMPAD_BATT_STATUS_LOW           0x02
-#define SIMPAD_BATT_STATUS_CRITICAL      0x04
-#define SIMPAD_BATT_STATUS_CHARGING      0x08
-#define SIMPAD_BATT_STATUS_CHARGE_MAIN   0x10
-#define SIMPAD_BATT_STATUS_DEAD          0x20   /* Battery will not charge */
-#define SIMPAD_BATT_NOT_INSTALLED        0x20   /* For expansion pack batteries */
-#define SIMPAD_BATT_STATUS_FULL          0x40   /* Battery fully charged (and connected to AC) */
-#define SIMPAD_BATT_STATUS_NOBATT        0x80
-#define SIMPAD_BATT_STATUS_UNKNOWN       0xff
-
-extern int simpad_get_battery(struct simpad_battery* );
-
-#endif // __ASM_ARCH_SIMPAD_H
-
-
-
-
-
-
-
-
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
deleted file mode 100644
index e3a0279750e3..000000000000
--- a/arch/arm/mach-sa1100/lart.c
+++ /dev/null
@@ -1,177 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/arm/mach-sa1100/lart.c
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_data/sa11x0-serial.h>
-#include <linux/tty.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-
-#include <video/sa1100fb.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <linux/platform_data/mfd-mcp-sa11x0.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-
-static struct mcp_plat_data lart_mcp_data = {
-	.mccr0		= MCCR0_ADM,
-	.sclk_rate	= 11981000,
-};
-
-#ifdef LART_GREY_LCD
-static struct sa1100fb_mach_info lart_grey_info = {
-	.pixclock	= 150000,	.bpp		= 4,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 1,		.vsync_len	= 1,
-	.left_margin	= 4,		.upper_margin	= 0,
-	.right_margin	= 2,		.lower_margin	= 0,
-
-	.cmap_greyscale	= 1,
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
-	.lccr0		= LCCR0_Mono | LCCR0_Sngl | LCCR0_Pas | LCCR0_4PixMono,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
-};
-#endif
-#ifdef LART_COLOR_LCD
-static struct sa1100fb_mach_info lart_color_info = {
-	.pixclock	= 150000,	.bpp		= 16,
-	.xres		= 320,		.yres		= 240,
-
-	.hsync_len	= 2,		.vsync_len	= 3,
-	.left_margin	= 69,		.upper_margin	= 14,
-	.right_margin	= 8,		.lower_margin	= 4,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
-};
-#endif
-#ifdef LART_VIDEO_OUT
-static struct sa1100fb_mach_info lart_video_info = {
-	.pixclock	= 39721,	.bpp		= 16,
-	.xres		= 640,		.yres		= 480,
-
-	.hsync_len	= 95,		.vsync_len	= 2,
-	.left_margin	= 40,		.upper_margin	= 32,
-	.right_margin	= 24,		.lower_margin	= 11,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnL | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
-};
-#endif
-
-#ifdef LART_KIT01_LCD
-static struct sa1100fb_mach_info lart_kit01_info = {
-	.pixclock	= 63291,	.bpp		= 16,
-	.xres		= 640,		.yres		= 480,
-
-	.hsync_len	= 64,		.vsync_len	= 3,
-	.left_margin	= 122,		.upper_margin	= 45,
-	.right_margin	= 10,		.lower_margin	= 10,
-
-	.lccr0		= LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3		= LCCR3_OutEnH | LCCR3_PixFlEdg
-};
-#endif
-
-static void __init lart_init(void)
-{
-	struct sa1100fb_mach_info *inf = NULL;
-
-#ifdef LART_GREY_LCD
-	inf = &lart_grey_info;
-#endif
-#ifdef LART_COLOR_LCD
-	inf = &lart_color_info;
-#endif
-#ifdef LART_VIDEO_OUT
-	inf = &lart_video_info;
-#endif
-#ifdef LART_KIT01_LCD
-	inf = &lart_kit01_info;
-#endif
-
-	if (inf)
-		sa11x0_register_lcd(inf);
-
-	sa11x0_ppc_configure_mcp();
-	sa11x0_register_mcp(&lart_mcp_data);
-}
-
-static struct map_desc lart_io_desc[] __initdata = {
-	{	/* main flash memory */
-		.virtual	=  0xe8000000,
-		.pfn		= __phys_to_pfn(0x00000000),
-		.length		= 0x00400000,
-		.type		= MT_DEVICE
-	}, {	/* main flash, alternative location */
-		.virtual	=  0xec000000,
-		.pfn		= __phys_to_pfn(0x08000000),
-		.length		= 0x00400000,
-		.type		= MT_DEVICE
-	}
-};
-
-/* LEDs */
-struct gpio_led lart_gpio_leds[] = {
-	{
-		.name			= "lart:red",
-		.default_trigger	= "cpu0",
-		.gpio			= 23,
-	},
-};
-
-static struct gpio_led_platform_data lart_gpio_led_info = {
-	.leds		= lart_gpio_leds,
-	.num_leds	= ARRAY_SIZE(lart_gpio_leds),
-};
-
-static struct platform_device lart_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &lart_gpio_led_info,
-	}
-};
-static void __init lart_map_io(void)
-{
-	sa1100_map_io();
-	iotable_init(lart_io_desc, ARRAY_SIZE(lart_io_desc));
-
-	sa1100_register_uart(0, 3);
-	sa1100_register_uart(1, 1);
-	sa1100_register_uart(2, 2);
-
-	GAFR |= (GPIO_UART_TXD | GPIO_UART_RXD);
-	GPDR |= GPIO_UART_TXD;
-	GPDR &= ~GPIO_UART_RXD;
-	PPAR |= PPAR_UPR;
-
-	platform_device_register(&lart_leds);
-}
-
-MACHINE_START(LART, "LART")
-	.atag_offset	= 0x100,
-	.map_io		= lart_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= sa1100_init_irq,
-	.init_machine	= lart_init,
-	.init_late	= sa11x0_init_late,
-	.init_time	= sa1100_timer_init,
-	.restart	= sa11x0_restart,
-MACHINE_END
diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c
deleted file mode 100644
index f6c9c19c39fb..000000000000
--- a/arch/arm/mach-sa1100/nanoengine.c
+++ /dev/null
@@ -1,136 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-sa1100/nanoengine.c
- *
- * Bright Star Engineering's nanoEngine board init code.
- *
- * Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
- */
-
-#include <linux/init.h>
-#include <linux/gpio/machine.h>
-#include <linux/kernel.h>
-#include <linux/platform_data/sa11x0-serial.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/root_dev.h>
-
-#include <asm/mach-types.h>
-#include <asm/setup.h>
-#include <asm/page.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/nanoengine.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-
-/* Flash bank 0 */
-static struct mtd_partition nanoengine_partitions[] = {
-	{
-		.name	= "nanoEngine boot firmware and parameter table",
-		.size		= 0x00010000,  /* 32K */
-		.offset		= 0,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "kernel/initrd reserved",
-		.size		= 0x002f0000,
-		.offset		= 0x00010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "experimental filesystem allocation",
-		.size		= 0x00100000,
-		.offset		= 0x00300000,
-		.mask_flags	= MTD_WRITEABLE,
-	}
-};
-
-static struct flash_platform_data nanoengine_flash_data = {
-	.map_name	= "jedec_probe",
-	.parts		= nanoengine_partitions,
-	.nr_parts	= ARRAY_SIZE(nanoengine_partitions),
-};
-
-static struct resource nanoengine_flash_resources[] = {
-	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M),
-	DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_32M),
-};
-
-static struct map_desc nanoengine_io_desc[] __initdata = {
-	{
-		/* System Registers */
-		.virtual	= 0xf0000000,
-		.pfn		= __phys_to_pfn(0x10000000),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}, {
-		/* Internal PCI Memory Read/Write */
-		.virtual	= NANO_PCI_MEM_RW_VIRT,
-		.pfn		= __phys_to_pfn(NANO_PCI_MEM_RW_PHYS),
-		.length		= NANO_PCI_MEM_RW_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		/* Internal PCI Config Space */
-		.virtual	= NANO_PCI_CONFIG_SPACE_VIRT,
-		.pfn		= __phys_to_pfn(NANO_PCI_CONFIG_SPACE_PHYS),
-		.length		= NANO_PCI_CONFIG_SPACE_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init nanoengine_map_io(void)
-{
-	sa1100_map_io();
-	iotable_init(nanoengine_io_desc, ARRAY_SIZE(nanoengine_io_desc));
-
-	sa1100_register_uart(0, 1);
-	sa1100_register_uart(1, 2);
-	sa1100_register_uart(2, 3);
-	Ser1SDCR0 |= SDCR0_UART;
-	/* disable IRDA -- UART2 is used as a normal serial port */
-	Ser2UTCR4 = 0;
-	Ser2HSCR0 = 0;
-}
-
-static struct gpiod_lookup_table nanoengine_pcmcia0_gpio_table = {
-	.dev_id = "sa11x0-pcmcia.0",
-	.table = {
-		GPIO_LOOKUP("gpio", 11, "ready", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio", 13, "detect", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio", 15, "reset", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table nanoengine_pcmcia1_gpio_table = {
-	.dev_id = "sa11x0-pcmcia.1",
-	.table = {
-		GPIO_LOOKUP("gpio", 12, "ready", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio", 14, "detect", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio", 16, "reset", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static void __init nanoengine_init(void)
-{
-	sa11x0_register_pcmcia(0, &nanoengine_pcmcia0_gpio_table);
-	sa11x0_register_pcmcia(1, &nanoengine_pcmcia1_gpio_table);
-	sa11x0_register_mtd(&nanoengine_flash_data, nanoengine_flash_resources,
-		ARRAY_SIZE(nanoengine_flash_resources));
-}
-
-MACHINE_START(NANOENGINE, "BSE nanoEngine")
-	.atag_offset	= 0x100,
-	.map_io		= nanoengine_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= sa1100_init_irq,
-	.init_time	= sa1100_timer_init,
-	.init_machine	= nanoengine_init,
-	.init_late	= sa11x0_init_late,
-	.restart	= sa11x0_restart,
-MACHINE_END
diff --git a/arch/arm/mach-sa1100/pci-nanoengine.c b/arch/arm/mach-sa1100/pci-nanoengine.c
deleted file mode 100644
index 0791d11ff4d4..000000000000
--- a/arch/arm/mach-sa1100/pci-nanoengine.c
+++ /dev/null
@@ -1,191 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * linux/arch/arm/mach-sa1100/pci-nanoengine.c
- *
- * PCI functions for BSE nanoEngine PCI
- *
- * Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
- */
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/pci.h>
-
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-#include <mach/nanoengine.h>
-#include <mach/hardware.h>
-
-static void __iomem *nanoengine_pci_map_bus(struct pci_bus *bus,
-					    unsigned int devfn, int where)
-{
-	if (bus->number != 0 || (devfn >> 3) != 0)
-		return NULL;
-
-	return (void __iomem *)NANO_PCI_CONFIG_SPACE_VIRT +
-		((bus->number << 16) | (devfn << 8) | (where & ~3));
-}
-
-static struct pci_ops pci_nano_ops = {
-	.map_bus = nanoengine_pci_map_bus,
-	.read	= pci_generic_config_read32,
-	.write	= pci_generic_config_write32,
-};
-
-static int __init pci_nanoengine_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	return NANOENGINE_IRQ_GPIO_PCI;
-}
-
-static struct resource pci_io_ports =
-	DEFINE_RES_IO_NAMED(0x400, 0x400, "PCI IO");
-
-static struct resource pci_non_prefetchable_memory = {
-	.name	= "PCI non-prefetchable",
-	.start	= NANO_PCI_MEM_RW_PHYS,
-	/* nanoEngine documentation says there is a 1 Megabyte window here,
-	 * but PCI reports just 128 + 8 kbytes. */
-	.end	= NANO_PCI_MEM_RW_PHYS + NANO_PCI_MEM_RW_SIZE - 1,
-/*	.end	= NANO_PCI_MEM_RW_PHYS + SZ_128K + SZ_8K - 1,*/
-	.flags	= IORESOURCE_MEM,
-};
-
-/*
- * nanoEngine PCI reports 1 Megabyte of prefetchable memory, but it
- * overlaps with previously defined memory.
- *
- * Here is what happens:
- *
-# dmesg
-...
-pci 0000:00:00.0: [8086:1209] type 0 class 0x000200
-pci 0000:00:00.0: reg 10: [mem 0x00021000-0x00021fff]
-pci 0000:00:00.0: reg 14: [io  0x0000-0x003f]
-pci 0000:00:00.0: reg 18: [mem 0x00000000-0x0001ffff]
-pci 0000:00:00.0: reg 30: [mem 0x00000000-0x000fffff pref]
-pci 0000:00:00.0: supports D1 D2
-pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
-pci 0000:00:00.0: PME# disabled
-PCI: bus0: Fast back to back transfers enabled
-pci 0000:00:00.0: BAR 6: can't assign mem pref (size 0x100000)
-pci 0000:00:00.0: BAR 2: assigned [mem 0x18600000-0x1861ffff]
-pci 0000:00:00.0: BAR 2: set to [mem 0x18600000-0x1861ffff] (PCI address [0x0-0x1ffff])
-pci 0000:00:00.0: BAR 0: assigned [mem 0x18620000-0x18620fff]
-pci 0000:00:00.0: BAR 0: set to [mem 0x18620000-0x18620fff] (PCI address [0x20000-0x20fff])
-pci 0000:00:00.0: BAR 1: assigned [io  0x0400-0x043f]
-pci 0000:00:00.0: BAR 1: set to [io  0x0400-0x043f] (PCI address [0x0-0x3f])
- *
- * On the other hand, if we do not request the prefetchable memory resource,
- * linux will alloc it first and the two non-prefetchable memory areas that
- * are our real interest will not be mapped. So we choose to map it to an
- * unused area. It gets recognized as expansion ROM, but becomes disabled.
- *
- * Here is what happens then:
- *
-# dmesg
-...
-pci 0000:00:00.0: [8086:1209] type 0 class 0x000200
-pci 0000:00:00.0: reg 10: [mem 0x00021000-0x00021fff]
-pci 0000:00:00.0: reg 14: [io  0x0000-0x003f]
-pci 0000:00:00.0: reg 18: [mem 0x00000000-0x0001ffff]
-pci 0000:00:00.0: reg 30: [mem 0x00000000-0x000fffff pref]
-pci 0000:00:00.0: supports D1 D2
-pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
-pci 0000:00:00.0: PME# disabled
-PCI: bus0: Fast back to back transfers enabled
-pci 0000:00:00.0: BAR 6: assigned [mem 0x78000000-0x780fffff pref]
-pci 0000:00:00.0: BAR 2: assigned [mem 0x18600000-0x1861ffff]
-pci 0000:00:00.0: BAR 2: set to [mem 0x18600000-0x1861ffff] (PCI address [0x0-0x1ffff])
-pci 0000:00:00.0: BAR 0: assigned [mem 0x18620000-0x18620fff]
-pci 0000:00:00.0: BAR 0: set to [mem 0x18620000-0x18620fff] (PCI address [0x20000-0x20fff])
-pci 0000:00:00.0: BAR 1: assigned [io  0x0400-0x043f]
-pci 0000:00:00.0: BAR 1: set to [io  0x0400-0x043f] (PCI address [0x0-0x3f])
-
-# lspci -vv -s 0000:00:00.0
-00:00.0 Class 0200: Device 8086:1209 (rev 09)
-        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
-        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR+ <PERR+ INTx-
-        Latency: 0 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
-        Interrupt: pin A routed to IRQ 0
-        Region 0: Memory at 18620000 (32-bit, non-prefetchable) [size=4K]
-        Region 1: I/O ports at 0400 [size=64]
-        Region 2: [virtual] Memory at 18600000 (32-bit, non-prefetchable) [size=128K]
-        [virtual] Expansion ROM at 78000000 [disabled] [size=1M]
-        Capabilities: [dc] Power Management version 2
-                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
-                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
-        Kernel driver in use: e100
-        Kernel modules: e100
- *
- */
-static struct resource pci_prefetchable_memory = {
-	.name	= "PCI prefetchable",
-	.start	= 0x78000000,
-	.end	= 0x78000000 + NANO_PCI_MEM_RW_SIZE - 1,
-	.flags	= IORESOURCE_MEM  | IORESOURCE_PREFETCH,
-};
-
-static int __init pci_nanoengine_setup_resources(struct pci_sys_data *sys)
-{
-	if (request_resource(&ioport_resource, &pci_io_ports)) {
-		printk(KERN_ERR "PCI: unable to allocate io port region\n");
-		return -EBUSY;
-	}
-	if (request_resource(&iomem_resource, &pci_non_prefetchable_memory)) {
-		release_resource(&pci_io_ports);
-		printk(KERN_ERR "PCI: unable to allocate non prefetchable\n");
-		return -EBUSY;
-	}
-	if (request_resource(&iomem_resource, &pci_prefetchable_memory)) {
-		release_resource(&pci_io_ports);
-		release_resource(&pci_non_prefetchable_memory);
-		printk(KERN_ERR "PCI: unable to allocate prefetchable\n");
-		return -EBUSY;
-	}
-	pci_add_resource_offset(&sys->resources, &pci_io_ports, sys->io_offset);
-	pci_add_resource_offset(&sys->resources,
-				&pci_non_prefetchable_memory, sys->mem_offset);
-	pci_add_resource_offset(&sys->resources,
-				&pci_prefetchable_memory, sys->mem_offset);
-
-	return 1;
-}
-
-int __init pci_nanoengine_setup(int nr, struct pci_sys_data *sys)
-{
-	int ret = 0;
-
-	pcibios_min_io = 0;
-	pcibios_min_mem = 0;
-
-	if (nr == 0) {
-		sys->mem_offset = NANO_PCI_MEM_RW_PHYS;
-		sys->io_offset = 0x400;
-		ret = pci_nanoengine_setup_resources(sys);
-		/* Enable alternate memory bus master mode, see
-		 * "Intel StrongARM SA1110 Developer's Manual",
-		 * section 10.8, "Alternate Memory Bus Master Mode". */
-		GPDR = (GPDR & ~GPIO_MBREQ) | GPIO_MBGNT;
-		GAFR |= GPIO_MBGNT | GPIO_MBREQ;
-		TUCR |= TUCR_MBGPIO;
-	}
-
-	return ret;
-}
-
-static struct hw_pci nanoengine_pci __initdata = {
-	.map_irq		= pci_nanoengine_map_irq,
-	.nr_controllers		= 1,
-	.ops			= &pci_nano_ops,
-	.setup			= pci_nanoengine_setup,
-};
-
-static int __init nanoengine_pci_init(void)
-{
-	if (machine_is_nanoengine())
-		pci_common_init(&nanoengine_pci);
-	return 0;
-}
-
-subsys_initcall(nanoengine_pci_init);
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
deleted file mode 100644
index b2b0c9fc18f7..000000000000
--- a/arch/arm/mach-sa1100/pleb.c
+++ /dev/null
@@ -1,148 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/arm/mach-sa1100/pleb.c
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/tty.h>
-#include <linux/ioport.h>
-#include <linux/platform_data/sa11x0-serial.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/mtd/partitions.h>
-#include <linux/smc91x.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-
-
-/*
- * Ethernet IRQ mappings
- */
-
-#define PLEB_ETH0_P		(0x20000300)	/* Ethernet 0 in PCMCIA0 IO */
-#define PLEB_ETH0_V		(0xf6000300)
-
-#define GPIO_ETH0_IRQ		GPIO_GPIO(21)
-#define GPIO_ETH0_EN		GPIO_GPIO(26)
-
-#define IRQ_GPIO_ETH0_IRQ	IRQ_GPIO21
-
-static struct resource smc91x_resources[] = {
-	[0] = DEFINE_RES_MEM(PLEB_ETH0_P, 0x04000000),
-#if 0 /* Autoprobe instead, to get rising/falling edge characteristic right */
-	[1] = DEFINE_RES_IRQ(IRQ_GPIO_ETH0_IRQ),
-#endif
-};
-
-static struct smc91x_platdata smc91x_platdata = {
-	.flags = SMC91X_USE_16BIT | SMC91X_USE_8BIT | SMC91X_NOWAIT,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev = {
-		.platform_data  = &smc91x_platdata,
-	},
-};
-
-static struct platform_device *devices[] __initdata = {
-	&smc91x_device,
-};
-
-
-/*
- * Pleb's memory map
- * has flash memory (typically 4 or 8 meg) selected by
- * the two SA1100 lowest chip select outputs.
- */
-static struct resource pleb_flash_resources[] = {
-	[0] = DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_8M),
-	[1] = DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_8M),
-};
-
-
-static struct mtd_partition pleb_partitions[] = {
-	{
-		.name		= "blob",
-		.offset		= 0,
-		.size		= 0x00020000,
-	}, {
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 0x000e0000,
-	}, {
-		.name		= "rootfs",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 0x00300000,
-	}
-};
-
-
-static struct flash_platform_data pleb_flash_data = {
-	.map_name = "cfi_probe",
-	.parts = pleb_partitions,
-	.nr_parts = ARRAY_SIZE(pleb_partitions),
-};
-
-
-static void __init pleb_init(void)
-{
-	sa11x0_register_mtd(&pleb_flash_data, pleb_flash_resources,
-			      ARRAY_SIZE(pleb_flash_resources));
-
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-
-static void __init pleb_map_io(void)
-{
-	sa1100_map_io();
-
-	sa1100_register_uart(0, 3);
-	sa1100_register_uart(1, 1);
-
-	GAFR |= (GPIO_UART_TXD | GPIO_UART_RXD);
-	GPDR |= GPIO_UART_TXD;
-	GPDR &= ~GPIO_UART_RXD;
-	PPAR |= PPAR_UPR;
-
-	/*
-	 * Fix expansion memory timing for network card
-	 */
-	MECR = ((2<<10) | (2<<5) | (2<<0));
-
-	/*
-	 * Enable the SMC ethernet controller
-	 */
-	GPDR |= GPIO_ETH0_EN;	/* set to output */
-	GPCR  = GPIO_ETH0_EN;	/* clear MCLK (enable smc) */
-
-	GPDR &= ~GPIO_ETH0_IRQ;
-
-	irq_set_irq_type(GPIO_ETH0_IRQ, IRQ_TYPE_EDGE_FALLING);
-}
-
-MACHINE_START(PLEB, "PLEB")
-	.map_io		= pleb_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= sa1100_init_irq,
-	.init_time	= sa1100_timer_init,
-	.init_machine   = pleb_init,
-	.init_late	= sa11x0_init_late,
-	.restart	= sa11x0_restart,
-MACHINE_END
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
deleted file mode 100644
index 351f891b4842..000000000000
--- a/arch/arm/mach-sa1100/shannon.c
+++ /dev/null
@@ -1,157 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/arm/mach-sa1100/shannon.c
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/gpio/machine.h>
-#include <linux/kernel.h>
-#include <linux/platform_data/sa11x0-serial.h>
-#include <linux/tty.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-
-#include <video/sa1100fb.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/setup.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-#include <linux/platform_data/mfd-mcp-sa11x0.h>
-#include <mach/shannon.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-
-static struct mtd_partition shannon_partitions[] = {
-	{
-		.name		= "BLOB boot loader",
-		.offset		= 0,
-		.size		= 0x20000
-	},
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 0xe0000
-	},
-	{
-		.name		= "initrd",
-		.offset		= MTDPART_OFS_APPEND,	
-		.size		= MTDPART_SIZ_FULL
-	}
-};
-
-static struct flash_platform_data shannon_flash_data = {
-	.map_name	= "cfi_probe",
-	.parts		= shannon_partitions,
-	.nr_parts	= ARRAY_SIZE(shannon_partitions),
-};
-
-static struct resource shannon_flash_resource =
-	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_4M);
-
-static struct mcp_plat_data shannon_mcp_data = {
-	.mccr0		= MCCR0_ADM,
-	.sclk_rate	= 11981000,
-};
-
-static struct sa1100fb_mach_info shannon_lcd_info = {
-	.pixclock	= 152500,	.bpp		= 8,
-	.xres		= 640,		.yres		= 480,
-
-	.hsync_len	= 4,		.vsync_len	= 3,
-	.left_margin	= 2,		.upper_margin	= 0,
-	.right_margin	= 1,		.lower_margin	= 0,
-
-	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-
-	.lccr0		= LCCR0_Color | LCCR0_Dual | LCCR0_Pas,
-	.lccr3		= LCCR3_ACBsDiv(512),
-};
-
-static struct gpiod_lookup_table shannon_pcmcia0_gpio_table = {
-	.dev_id = "sa11x0-pcmcia.0",
-	.table = {
-		GPIO_LOOKUP("gpio", 24, "detect", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio", 26, "ready", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table shannon_pcmcia1_gpio_table = {
-	.dev_id = "sa11x0-pcmcia.1",
-	.table = {
-		GPIO_LOOKUP("gpio", 25, "detect", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio", 27, "ready", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct regulator_consumer_supply shannon_cf_vcc_consumers[] = {
-	REGULATOR_SUPPLY("vcc", "sa11x0-pcmcia.0"),
-	REGULATOR_SUPPLY("vcc", "sa11x0-pcmcia.1"),
-};
-
-static struct fixed_voltage_config shannon_cf_vcc_pdata __initdata = {
-	.supply_name = "cf-power",
-	.microvolts = 3300000,
-	.enabled_at_boot = 1,
-};
-
-static struct gpiod_lookup_table shannon_display_gpio_table = {
-	.dev_id = "sa11x0-fb",
-	.table = {
-		GPIO_LOOKUP("gpio", 22, "shannon-lcden", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static void __init shannon_init(void)
-{
-	sa11x0_register_fixed_regulator(0, &shannon_cf_vcc_pdata,
-					shannon_cf_vcc_consumers,
-					ARRAY_SIZE(shannon_cf_vcc_consumers),
-					false);
-	sa11x0_register_pcmcia(0, &shannon_pcmcia0_gpio_table);
-	sa11x0_register_pcmcia(1, &shannon_pcmcia1_gpio_table);
-	sa11x0_ppc_configure_mcp();
-	gpiod_add_lookup_table(&shannon_display_gpio_table);
-	sa11x0_register_lcd(&shannon_lcd_info);
-	sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1);
-	sa11x0_register_mcp(&shannon_mcp_data);
-}
-
-static void __init shannon_map_io(void)
-{
-	sa1100_map_io();
-
-	sa1100_register_uart(0, 3);
-	sa1100_register_uart(1, 1);
-
-	Ser1SDCR0 |= SDCR0_SUS;
-	GAFR |= (GPIO_UART_TXD | GPIO_UART_RXD);
-	GPDR |= GPIO_UART_TXD | SHANNON_GPIO_CODEC_RESET;
-	GPDR &= ~GPIO_UART_RXD;
-	PPAR |= PPAR_UPR;
-
-	/* reset the codec */
-	GPCR = SHANNON_GPIO_CODEC_RESET;
-	GPSR = SHANNON_GPIO_CODEC_RESET;
-}
-
-MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)")
-	.atag_offset	= 0x100,
-	.map_io		= shannon_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= sa1100_init_irq,
-	.init_time	= sa1100_timer_init,
-	.init_machine	= shannon_init,
-	.init_late	= sa11x0_init_late,
-	.restart	= sa11x0_restart,
-MACHINE_END
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
deleted file mode 100644
index c7fb9a73e4c5..000000000000
--- a/arch/arm/mach-sa1100/simpad.c
+++ /dev/null
@@ -1,423 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/arm/mach-sa1100/simpad.c
- */
-
-#include <linux/module.h>
-#include <linux/gpio/machine.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/tty.h>
-#include <linux/proc_fs.h>
-#include <linux/string.h>
-#include <linux/pm.h>
-#include <linux/platform_data/sa11x0-serial.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/ucb1x00.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/io.h>
-#include <linux/gpio/driver.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/irq.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-#include <linux/platform_data/mfd-mcp-sa11x0.h>
-#include <mach/simpad.h>
-#include <mach/irqs.h>
-
-#include <linux/serial_core.h>
-#include <linux/ioport.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/leds.h>
-#include <linux/platform_data/i2c-gpio.h>
-
-#include "generic.h"
-
-/*
- * CS3 support
- */
-
-static long cs3_shadow;
-static spinlock_t cs3_lock;
-static struct gpio_chip cs3_gpio;
-
-long simpad_get_cs3_ro(void)
-{
-	return readl(CS3_BASE);
-}
-EXPORT_SYMBOL(simpad_get_cs3_ro);
-
-long simpad_get_cs3_shadow(void)
-{
-	return cs3_shadow;
-}
-EXPORT_SYMBOL(simpad_get_cs3_shadow);
-
-static void __simpad_write_cs3(void)
-{
-	writel(cs3_shadow, CS3_BASE);
-}
-
-void simpad_set_cs3_bit(int value)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cs3_lock, flags);
-	cs3_shadow |= value;
-	__simpad_write_cs3();
-	spin_unlock_irqrestore(&cs3_lock, flags);
-}
-EXPORT_SYMBOL(simpad_set_cs3_bit);
-
-void simpad_clear_cs3_bit(int value)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&cs3_lock, flags);
-	cs3_shadow &= ~value;
-	__simpad_write_cs3();
-	spin_unlock_irqrestore(&cs3_lock, flags);
-}
-EXPORT_SYMBOL(simpad_clear_cs3_bit);
-
-static void cs3_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
-	if (offset > 15)
-		return;
-	if (value)
-		simpad_set_cs3_bit(1 << offset);
-	else
-		simpad_clear_cs3_bit(1 << offset);
-};
-
-static int cs3_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	if (offset > 15)
-		return !!(simpad_get_cs3_ro() & (1 << (offset - 16)));
-	return !!(simpad_get_cs3_shadow() & (1 << offset));
-};
-
-static int cs3_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
-	if (offset > 15)
-		return 0;
-	return -EINVAL;
-};
-
-static int cs3_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
-	int value)
-{
-	if (offset > 15)
-		return -EINVAL;
-	cs3_gpio_set(chip, offset, value);
-	return 0;
-};
-
-static struct map_desc simpad_io_desc[] __initdata = {
-	{	/* MQ200 */
-		.virtual	=  0xf2800000,
-		.pfn		= __phys_to_pfn(0x4b800000),
-		.length		= 0x00800000,
-		.type		= MT_DEVICE
-	}, {	/* Simpad CS3 */
-		.virtual	= (unsigned long)CS3_BASE,
-		.pfn		= __phys_to_pfn(SA1100_CS3_PHYS),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	},
-};
-
-
-static void simpad_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
-{
-	if (port->mapbase == (u_int)&Ser1UTCR0) {
-		if (state)
-		{
-			simpad_clear_cs3_bit(RS232_ON);
-			simpad_clear_cs3_bit(DECT_POWER_ON);
-		}else
-		{
-			simpad_set_cs3_bit(RS232_ON);
-			simpad_set_cs3_bit(DECT_POWER_ON);
-		}
-	}
-}
-
-static struct sa1100_port_fns simpad_port_fns __initdata = {
-	.pm	   = simpad_uart_pm,
-};
-
-
-static struct mtd_partition simpad_partitions[] = {
-	{
-		.name       = "SIMpad boot firmware",
-		.size       = 0x00080000,
-		.offset     = 0,
-		.mask_flags = MTD_WRITEABLE,
-	}, {
-		.name       = "SIMpad kernel",
-		.size       = 0x0010000,
-		.offset     = MTDPART_OFS_APPEND,
-	}, {
-		.name       = "SIMpad root jffs2",
-		.size       = MTDPART_SIZ_FULL,
-		.offset     = MTDPART_OFS_APPEND,
-	}
-};
-
-static struct flash_platform_data simpad_flash_data = {
-	.map_name    = "cfi_probe",
-	.parts       = simpad_partitions,
-	.nr_parts    = ARRAY_SIZE(simpad_partitions),
-};
-
-
-static struct resource simpad_flash_resources [] = {
-	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_16M),
-	DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_16M),
-};
-
-static struct ucb1x00_plat_data simpad_ucb1x00_data = {
-	.gpio_base	= SIMPAD_UCB1X00_GPIO_BASE,
-};
-
-static struct mcp_plat_data simpad_mcp_data = {
-	.mccr0		= MCCR0_ADM,
-	.sclk_rate	= 11981000,
-	.codec_pdata	= &simpad_ucb1x00_data,
-};
-
-
-
-static void __init simpad_map_io(void)
-{
-	sa1100_map_io();
-
-	iotable_init(simpad_io_desc, ARRAY_SIZE(simpad_io_desc));
-
-	/* Initialize CS3 */
-	cs3_shadow = (EN1 | EN0 | LED2_ON | DISPLAY_ON |
-		RS232_ON | ENABLE_5V | RESET_SIMCARD | DECT_POWER_ON);
-	__simpad_write_cs3(); /* Spinlocks not yet initialized */
-
-        sa1100_register_uart_fns(&simpad_port_fns);
-	sa1100_register_uart(0, 3);  /* serial interface */
-	sa1100_register_uart(1, 1);  /* DECT             */
-
-	// Reassign UART 1 pins
-	GAFR |= GPIO_UART_TXD | GPIO_UART_RXD;
-	GPDR |= GPIO_UART_TXD | GPIO_LDD13 | GPIO_LDD15;
-	GPDR &= ~GPIO_UART_RXD;
-	PPAR |= PPAR_UPR;
-
-	/*
-	 * Set up registers for sleep mode.
-	 */
-
-
-	PWER = PWER_GPIO0| PWER_RTC;
-	PGSR = 0x818;
-	PCFR = 0;
-	PSDR = 0;
-
-}
-
-static void simpad_power_off(void)
-{
-	local_irq_disable();
-	cs3_shadow = SD_MEDIAQ;
-	__simpad_write_cs3(); /* Bypass spinlock here */
-
-	/* disable internal oscillator, float CS lines */
-	PCFR = (PCFR_OPDE | PCFR_FP | PCFR_FS);
-	/* enable wake-up on GPIO0 */
-	PWER = GFER = GRER = PWER_GPIO0;
-	/*
-	 * set scratchpad to zero, just in case it is used as a
-	 * restart address by the bootloader.
-	 */
-	PSPR = 0;
-	PGSR = 0;
-	/* enter sleep mode */
-	PMCR = PMCR_SF;
-	while(1);
-
-	local_irq_enable(); /* we won't ever call it */
-
-
-}
-
-/*
- * gpio_keys
-*/
-
-static struct gpio_keys_button simpad_button_table[] = {
-	{ KEY_POWER, IRQ_GPIO_POWER_BUTTON, 1, "power button" },
-};
-
-static struct gpio_keys_platform_data simpad_keys_data = {
-	.buttons = simpad_button_table,
-	.nbuttons = ARRAY_SIZE(simpad_button_table),
-};
-
-static struct platform_device simpad_keys = {
-	.name = "gpio-keys",
-	.dev = {
-		.platform_data = &simpad_keys_data,
-	},
-};
-
-static struct gpio_keys_button simpad_polled_button_table[] = {
-	{ KEY_PROG1, SIMPAD_UCB1X00_GPIO_PROG1, 1, "prog1 button" },
-	{ KEY_PROG2, SIMPAD_UCB1X00_GPIO_PROG2, 1, "prog2 button" },
-	{ KEY_UP,    SIMPAD_UCB1X00_GPIO_UP,    1, "up button" },
-	{ KEY_DOWN,  SIMPAD_UCB1X00_GPIO_DOWN,  1, "down button" },
-	{ KEY_LEFT,  SIMPAD_UCB1X00_GPIO_LEFT,  1, "left button" },
-	{ KEY_RIGHT, SIMPAD_UCB1X00_GPIO_RIGHT, 1, "right button" },
-};
-
-static struct gpio_keys_platform_data simpad_polled_keys_data = {
-	.buttons = simpad_polled_button_table,
-	.nbuttons = ARRAY_SIZE(simpad_polled_button_table),
-	.poll_interval = 50,
-};
-
-static struct platform_device simpad_polled_keys = {
-	.name = "gpio-keys-polled",
-	.dev = {
-		.platform_data = &simpad_polled_keys_data,
-	},
-};
-
-/*
- * GPIO LEDs
- */
-
-static struct gpio_led simpad_leds[] = {
-	{
-		.name = "simpad:power",
-		.gpio = SIMPAD_CS3_LED2_ON,
-		.active_low = 0,
-		.default_trigger = "default-on",
-	},
-};
-
-static struct gpio_led_platform_data simpad_led_data = {
-	.num_leds = ARRAY_SIZE(simpad_leds),
-	.leds = simpad_leds,
-};
-
-static struct platform_device simpad_gpio_leds = {
-	.name = "leds-gpio",
-	.id = 0,
-	.dev = {
-		.platform_data = &simpad_led_data,
-	},
-};
-
-/*
- * i2c
- */
-static struct gpiod_lookup_table simpad_i2c_gpiod_table = {
-	.dev_id = "i2c-gpio.0",
-	.table = {
-		GPIO_LOOKUP_IDX("gpio", 21, NULL, 0,
-				GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		GPIO_LOOKUP_IDX("gpio", 25, NULL, 1,
-				GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-	},
-};
-
-static struct i2c_gpio_platform_data simpad_i2c_data = {
-	.udelay = 10,
-	.timeout = HZ,
-};
-
-static struct platform_device simpad_i2c = {
-	.name = "i2c-gpio",
-	.id = 0,
-	.dev = {
-		.platform_data = &simpad_i2c_data,
-	},
-};
-
-/*
- * MediaQ Video Device
- */
-static struct platform_device simpad_mq200fb = {
-	.name = "simpad-mq200",
-	.id   = 0,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&simpad_keys,
-	&simpad_polled_keys,
-	&simpad_mq200fb,
-	&simpad_gpio_leds,
-	&simpad_i2c,
-};
-
-/* Compact Flash */
-static struct gpiod_lookup_table simpad_cf_gpio_table = {
-	.dev_id = "sa11x0-pcmcia",
-	.table = {
-		GPIO_LOOKUP("gpio", GPIO_CF_IRQ, "cf-ready", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio", GPIO_CF_CD, "cf-detect", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-
-static int __init simpad_init(void)
-{
-	int ret;
-
-	spin_lock_init(&cs3_lock);
-
-	cs3_gpio.label = "simpad_cs3";
-	cs3_gpio.base = SIMPAD_CS3_GPIO_BASE;
-	cs3_gpio.ngpio = 24;
-	cs3_gpio.set = cs3_gpio_set;
-	cs3_gpio.get = cs3_gpio_get;
-	cs3_gpio.direction_input = cs3_gpio_direction_input;
-	cs3_gpio.direction_output = cs3_gpio_direction_output;
-	ret = gpiochip_add_data(&cs3_gpio, NULL);
-	if (ret)
-		printk(KERN_WARNING "simpad: Unable to register cs3 GPIO device");
-
-	pm_power_off = simpad_power_off;
-
-	sa11x0_register_pcmcia(-1, &simpad_cf_gpio_table);
-	sa11x0_ppc_configure_mcp();
-	sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources,
-			      ARRAY_SIZE(simpad_flash_resources));
-	sa11x0_register_mcp(&simpad_mcp_data);
-
-	gpiod_add_lookup_table(&simpad_i2c_gpiod_table);
-	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
-	if(ret)
-		printk(KERN_WARNING "simpad: Unable to register mq200 framebuffer device");
-
-	return 0;
-}
-
-arch_initcall(simpad_init);
-
-
-MACHINE_START(SIMPAD, "Simpad")
-	/* Maintainer: Holger Freyther */
-	.atag_offset	= 0x100,
-	.map_io		= simpad_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= sa1100_init_irq,
-	.init_late	= sa11x0_init_late,
-	.init_time	= sa1100_timer_init,
-	.restart	= sa11x0_restart,
-MACHINE_END
diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c
index ab5008f35803..9ef1dfa7b926 100644
--- a/arch/arm/mach-tegra/tegra.c
+++ b/arch/arm/mach-tegra/tegra.c
@@ -19,7 +19,6 @@
 #include <linux/of_fdt.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
-#include <linux/pda_power.h>
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 #include <linux/slab.h>
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index 8647cb80a93b..cabe98386245 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -18,7 +18,6 @@
 #include <linux/clkdev.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/mv643xx_i2c.h>
-#include <linux/platform_data/dsa.h>
 #include <linux/platform_data/dma-mv_xor.h>
 #include <linux/platform_data/usb-ehci-orion.h>
 #include <plat/common.h>
@@ -468,36 +467,6 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
 		    eth_data, &orion_ge11);
 }
 
-#ifdef CONFIG_ARCH_ORION5X
-/*****************************************************************************
- * Ethernet switch
- ****************************************************************************/
-static __initdata struct mdio_board_info orion_ge00_switch_board_info = {
-	.bus_id   = "orion-mii",
-	.modalias = "mv88e6085",
-};
-
-void __init orion_ge00_switch_init(struct dsa_chip_data *d)
-{
-	unsigned int i;
-
-	if (!IS_BUILTIN(CONFIG_PHYLIB))
-		return;
-
-	for (i = 0; i < ARRAY_SIZE(d->port_names); i++) {
-		if (!strcmp(d->port_names[i], "cpu")) {
-			d->netdev[i] = &orion_ge00.dev;
-			break;
-		}
-	}
-
-	orion_ge00_switch_board_info.mdio_addr = d->sw_addr;
-	orion_ge00_switch_board_info.platform_data = d;
-
-	mdiobus_register_board_info(&orion_ge00_switch_board_info, 1);
-}
-#endif
-
 /*****************************************************************************
  * I2C
  ****************************************************************************/
diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h
index 3647d3b33c20..d2aad95d20cb 100644
--- a/arch/arm/plat-orion/include/plat/common.h
+++ b/arch/arm/plat-orion/include/plat/common.h
@@ -12,7 +12,6 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/platform_data/usb-ehci-orion.h>
 
-struct dsa_chip_data;
 struct mv_sata_platform_data;
 
 void __init orion_uart0_init(void __iomem *membase,
@@ -57,8 +56,6 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq);
 
-void __init orion_ge00_switch_init(struct dsa_chip_data *d);
-
 void __init orion_i2c_init(unsigned long mapbase,
 			   unsigned long irq,
 			   unsigned long freq_m);