diff options
Diffstat (limited to 'arch/arm')
125 files changed, 886 insertions, 581 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 0fb4b218f665..d60b73d93e03 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -5,6 +5,7 @@ config ARM select ARCH_32BIT_OFF_T select ARCH_CORRECT_STACKTRACE_ON_KRETPROBE if HAVE_KRETPROBES && FRAME_POINTER && !ARM_UNWIND select ARCH_HAS_BINFMT_FLAT + select ARCH_HAS_CPU_FINALIZE_INIT if MMU select ARCH_HAS_CURRENT_STACK_POINTER select ARCH_HAS_DEBUG_VIRTUAL if MMU select ARCH_HAS_DMA_WRITE_COMBINE if !ARM_DMA_MEM_BUFFERABLE @@ -124,7 +125,9 @@ config ARM select HAVE_SYSCALL_TRACEPOINTS select HAVE_UID16 select HAVE_VIRT_CPU_ACCOUNTING_GEN + select HOTPLUG_CORE_SYNC_DEAD if HOTPLUG_CPU select IRQ_FORCED_THREADING + select LOCK_MM_AND_FIND_VMA select MODULES_USE_ELF_REL select NEED_DMA_MAP_STATE select OF_EARLY_FLATTREE if OF @@ -1780,7 +1783,7 @@ config VFP Say Y to include VFP support code in the kernel. This is needed if your hardware includes a VFP unit. - Please see <file:Documentation/arm/vfp/release-notes.rst> for + Please see <file:Documentation/arch/arm/vfp/release-notes.rst> for release notes and additional status information. Say N if your target does not have VFP hardware. diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c index 1feb6b0f7a1f..627752f18661 100644 --- a/arch/arm/boot/compressed/atags_to_fdt.c +++ b/arch/arm/boot/compressed/atags_to_fdt.c @@ -2,6 +2,7 @@ #include <linux/libfdt_env.h> #include <asm/setup.h> #include <libfdt.h> +#include "misc.h" #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND) #define do_extend_cmdline 1 diff --git a/arch/arm/boot/compressed/fdt_check_mem_start.c b/arch/arm/boot/compressed/fdt_check_mem_start.c index 9291a2661bdf..aa856567fd33 100644 --- a/arch/arm/boot/compressed/fdt_check_mem_start.c +++ b/arch/arm/boot/compressed/fdt_check_mem_start.c @@ -3,6 +3,7 @@ #include <linux/kernel.h> #include <linux/libfdt.h> #include <linux/sizes.h> +#include "misc.h" static const void *get_prop(const void *fdt, const char *node_path, const char *property, int minlen) diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index abfed1aa2baa..6b4baa6a9a50 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -103,9 +103,6 @@ static void putstr(const char *ptr) /* * gzip declarations */ -extern char input_data[]; -extern char input_data_end[]; - unsigned char *output_data; unsigned long free_mem_ptr; @@ -131,9 +128,6 @@ asmlinkage void __div0(void) error("Attempting division by 0!"); } -extern int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x)); - - void decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p, unsigned long free_mem_ptr_end_p, diff --git a/arch/arm/boot/compressed/misc.h b/arch/arm/boot/compressed/misc.h index c958dccd1d97..6da00a26ac08 100644 --- a/arch/arm/boot/compressed/misc.h +++ b/arch/arm/boot/compressed/misc.h @@ -6,5 +6,16 @@ void error(char *x) __noreturn; extern unsigned long free_mem_ptr; extern unsigned long free_mem_end_ptr; +void __div0(void); +void +decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p, + unsigned long free_mem_ptr_end_p, int arch_id); +void fortify_panic(const char *name); +int atags_to_fdt(void *atag_list, void *fdt, int total_space); +uint32_t fdt_check_mem_start(uint32_t mem_start, const void *fdt); +int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x)); + +extern char input_data[]; +extern char input_data_end[]; #endif diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts index 2fc9a5d5e0c0..625b9b311b49 100644 --- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts +++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts @@ -527,7 +527,7 @@ interrupt-parent = <&gpio1>; interrupts = <31 0>; - pendown-gpio = <&gpio1 31 0>; + pendown-gpio = <&gpio1 31 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <0x0>; diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts index aa5cc0e98bba..217e9b96c61e 100644 --- a/arch/arm/boot/dts/at91-sama7g5ek.dts +++ b/arch/arm/boot/dts/at91-sama7g5ek.dts @@ -792,7 +792,7 @@ }; &shdwc { - atmel,shdwc-debouncer = <976>; + debounce-delay-us = <976>; status = "okay"; input@0 { diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index 88869ca874d1..045cb253f23a 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -156,7 +156,7 @@ compatible = "ti,ads7843"; interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>; spi-max-frequency = <3000000>; - pendown-gpio = <&pioC 2 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&pioC 2 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <150>; ti,x-max = /bits/ 16 <3830>; diff --git a/arch/arm/boot/dts/imx6qdl-mba6.dtsi b/arch/arm/boot/dts/imx6qdl-mba6.dtsi index 78555a618851..7b7e6c2ad190 100644 --- a/arch/arm/boot/dts/imx6qdl-mba6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-mba6.dtsi @@ -209,6 +209,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio6 7 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_pcie>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi b/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi index 5882c7565f64..32a6022625d9 100644 --- a/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi +++ b/arch/arm/boot/dts/imx6ull-dhcor-som.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/regulator/dlg,da9063-regulator.h> #include "imx6ull.dtsi" / { @@ -84,16 +85,20 @@ regulators { vdd_soc_in_1v4: buck1 { + regulator-allowed-modes = <DA9063_BUCK_MODE_SLEEP>; /* PFM */ regulator-always-on; regulator-boot-on; + regulator-initial-mode = <DA9063_BUCK_MODE_SLEEP>; regulator-max-microvolt = <1400000>; regulator-min-microvolt = <1400000>; regulator-name = "vdd_soc_in_1v4"; }; vcc_3v3: buck2 { + regulator-allowed-modes = <DA9063_BUCK_MODE_SYNC>; /* PWM */ regulator-always-on; regulator-boot-on; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; regulator-max-microvolt = <3300000>; regulator-min-microvolt = <3300000>; regulator-name = "vcc_3v3"; @@ -106,8 +111,10 @@ * the voltage is set to 1.5V. */ vcc_ddr_1v35: buck3 { + regulator-allowed-modes = <DA9063_BUCK_MODE_SYNC>; /* PWM */ regulator-always-on; regulator-boot-on; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; regulator-max-microvolt = <1500000>; regulator-min-microvolt = <1500000>; regulator-name = "vcc_ddr_1v35"; diff --git a/arch/arm/boot/dts/imx7d-pico-hobbit.dts b/arch/arm/boot/dts/imx7d-pico-hobbit.dts index d917dc4f2f22..6ad39dca7009 100644 --- a/arch/arm/boot/dts/imx7d-pico-hobbit.dts +++ b/arch/arm/boot/dts/imx7d-pico-hobbit.dts @@ -64,7 +64,7 @@ interrupt-parent = <&gpio2>; interrupts = <7 0>; spi-max-frequency = <1000000>; - pendown-gpio = <&gpio2 7 0>; + pendown-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>; vcc-supply = <®_3p3v>; ti,x-min = /bits/ 16 <0>; ti,x-max = /bits/ 16 <4095>; diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index f483bc0afe5e..234e5fc647b2 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -205,7 +205,7 @@ pinctrl-0 = <&pinctrl_tsc2046_pendown>; interrupt-parent = <&gpio2>; interrupts = <29 0>; - pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio2 29 GPIO_ACTIVE_LOW>; touchscreen-max-pressure = <255>; wakeup-source; }; diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index e61b8a2bfb7d..51baedf1603b 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -227,7 +227,7 @@ interrupt-parent = <&gpio2>; interrupts = <25 0>; /* gpio_57 */ - pendown-gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>; diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi index 3decc2d78a6c..a7f99ae0c1fe 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi @@ -54,7 +54,7 @@ interrupt-parent = <&gpio1>; interrupts = <27 0>; /* gpio_27 */ - pendown-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio1 27 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index c595afe4181d..d310b5c7bac3 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -311,7 +311,7 @@ interrupt-parent = <&gpio1>; interrupts = <8 0>; /* boot6 / gpio_8 */ spi-max-frequency = <1000000>; - pendown-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>; vcc-supply = <®_vcc3>; pinctrl-names = "default"; pinctrl-0 = <&tsc2048_pins>; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi index 1d6e88f99eb3..c3570acc35fa 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi @@ -149,7 +149,7 @@ interrupt-parent = <&gpio4>; interrupts = <18 0>; /* gpio_114 */ - pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi index 7e30f9d45790..d95a0e130058 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi @@ -160,7 +160,7 @@ interrupt-parent = <&gpio4>; interrupts = <18 0>; /* gpio_114 */ - pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>; diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi index 559853764487..4c3b6bab179c 100644 --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -651,7 +651,7 @@ pinctrl-0 = <&penirq_pins>; interrupt-parent = <&gpio3>; interrupts = <30 IRQ_TYPE_NONE>; /* GPIO_94 */ - pendown-gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio3 30 GPIO_ACTIVE_LOW>; vcc-supply = <&vaux4>; ti,x-min = /bits/ 16 <0>; diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index 2d87b9fc230e..af288d63a26a 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -354,7 +354,7 @@ interrupt-parent = <&gpio1>; interrupts = <15 0>; /* gpio1_wk15 */ - pendown-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio1 15 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <0x0>; diff --git a/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts index 7a80e1c9f126..aa0e0e8d2a97 100644 --- a/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts +++ b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts @@ -268,7 +268,6 @@ function = "gpio"; drive-strength = <8>; bias-disable; - input-enable; }; wlan_hostwake_default_state: wlan-hostwake-default-state { @@ -276,7 +275,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; wlan_regulator_default_state: wlan-regulator-default-state { diff --git a/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts b/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts index d64096028ab1..5593a3a60d6c 100644 --- a/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts +++ b/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts @@ -352,7 +352,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; wlan_regulator_default_state: wlan-regulator-default-state { diff --git a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts index b82381229adf..b887e5361ec3 100644 --- a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts +++ b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts @@ -307,7 +307,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; touch_pins: touch-state { @@ -317,7 +316,6 @@ drive-strength = <8>; bias-pull-down; - input-enable; }; reset-pins { @@ -335,7 +333,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; wlan_regulator_default_state: wlan-regulator-default-state { diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 672b246afbba..d2289205ff81 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -83,6 +83,7 @@ L2: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; }; idle-states { diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index b653ea40c441..83839e1ec4d1 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -74,6 +74,7 @@ L2: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; qcom,saw = <&saw_l2>; }; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index dfcfb3339c23..f0ef86fadc9d 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -102,6 +102,7 @@ L2: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; qcom,saw = <&saw_l2>; }; }; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index af6764770fd1..7581845737a8 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -45,6 +45,7 @@ L2: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts index a8304769b509..b269fdca1460 100644 --- a/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts +++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dts @@ -49,7 +49,6 @@ gpioext1-pins { pins = "gpio2"; function = "gpio"; - input-enable; bias-disable; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index f601b40ebcf4..78023ed2fdf7 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -36,6 +36,7 @@ L2: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index 2a668cd535cc..616fef2ea682 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -42,6 +42,7 @@ L2: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index ab35f2d644c0..861695cecf84 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -592,7 +592,6 @@ pins = "gpio73"; function = "gpio"; bias-disable; - input-enable; }; touch_pin: touch-state { @@ -602,7 +601,6 @@ drive-strength = <2>; bias-disable; - input-enable; }; reset-pins { diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi index d3bec03b126c..68a2f9094e53 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi @@ -433,7 +433,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; sdc1_on: sdc1-on-state { diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 8208012684d4..7ed0d925a4e9 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -80,6 +80,7 @@ L2: l2-cache { compatible = "cache"; cache-level = <2>; + cache-unified; qcom,saw = <&saw_l2>; }; diff --git a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts index 8d2a054d8fee..8230d0e1d95d 100644 --- a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts +++ b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts @@ -461,7 +461,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; reset-pins { diff --git a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts index b9698ffb66ca..eb505d6d7f31 100644 --- a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts +++ b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts @@ -704,7 +704,6 @@ pins = "gpio75"; function = "gpio"; drive-strength = <16>; - input-enable; }; devwake-pins { @@ -760,14 +759,12 @@ i2c_touchkey_pins: i2c-touchkey-state { pins = "gpio95", "gpio96"; function = "gpio"; - input-enable; bias-pull-up; }; i2c_led_gpioex_pins: i2c-led-gpioex-state { pins = "gpio120", "gpio121"; function = "gpio"; - input-enable; bias-pull-down; }; @@ -781,7 +778,6 @@ wifi_pin: wifi-state { pins = "gpio92"; function = "gpio"; - input-enable; bias-pull-down; }; diff --git a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts index 04bc58d87abf..0f650ed31005 100644 --- a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts +++ b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts @@ -631,7 +631,6 @@ function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; bt_host_wake_pin: bt-host-wake-state { diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index c9e05e3540d6..00bf53f99c29 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -387,6 +387,7 @@ interrupt-names = "tx", "rx0", "rx1", "sce"; resets = <&rcc STM32F4_APB1_RESET(CAN2)>; clocks = <&rcc 0 STM32F4_APB1_CLOCK(CAN2)>; + st,can-secondary; st,gcan = <&gcan>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi index c8e6c52fb248..9f65403295ca 100644 --- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi @@ -283,6 +283,88 @@ slew-rate = <2>; }; }; + + can1_pins_a: can1-0 { + pins1 { + pinmux = <STM32_PINMUX('A', 12, AF9)>; /* CAN1_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('A', 11, AF9)>; /* CAN1_RX */ + bias-pull-up; + }; + }; + + can1_pins_b: can1-1 { + pins1 { + pinmux = <STM32_PINMUX('B', 9, AF9)>; /* CAN1_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 8, AF9)>; /* CAN1_RX */ + bias-pull-up; + }; + }; + + can1_pins_c: can1-2 { + pins1 { + pinmux = <STM32_PINMUX('D', 1, AF9)>; /* CAN1_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('D', 0, AF9)>; /* CAN1_RX */ + bias-pull-up; + + }; + }; + + can1_pins_d: can1-3 { + pins1 { + pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('H', 14, AF9)>; /* CAN1_RX */ + bias-pull-up; + + }; + }; + + can2_pins_a: can2-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 6, AF9)>; /* CAN2_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 5, AF9)>; /* CAN2_RX */ + bias-pull-up; + }; + }; + + can2_pins_b: can2-1 { + pins1 { + pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 12, AF9)>; /* CAN2_RX */ + bias-pull-up; + }; + }; + + can3_pins_a: can3-0 { + pins1 { + pinmux = <STM32_PINMUX('A', 15, AF11)>; /* CAN3_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('A', 8, AF11)>; /* CAN3_RX */ + bias-pull-up; + }; + }; + + can3_pins_b: can3-1 { + pins1 { + pinmux = <STM32_PINMUX('B', 4, AF11)>; /* CAN3_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 3, AF11)>; /* CAN3_RX */ + bias-pull-up; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts index 3b88209bacea..ff1f9a1bcfcf 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts @@ -132,6 +132,7 @@ reg = <0x2c0f0000 0x1000>; interrupts = <0 84 4>; cache-level = <2>; + cache-unified; }; pmu { diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c index 8a9aeeb504dd..e013ff1168d3 100644 --- a/arch/arm/common/mcpm_entry.c +++ b/arch/arm/common/mcpm_entry.c @@ -21,7 +21,7 @@ /* * The public API for this code is documented in arch/arm/include/asm/mcpm.h. * For a comprehensive description of the main algorithm used here, please - * see Documentation/arm/cluster-pm-race-avoidance.rst. + * see Documentation/arch/arm/cluster-pm-race-avoidance.rst. */ struct sync_struct mcpm_sync; diff --git a/arch/arm/common/mcpm_head.S b/arch/arm/common/mcpm_head.S index 299495c43dfd..f590e803ca11 100644 --- a/arch/arm/common/mcpm_head.S +++ b/arch/arm/common/mcpm_head.S @@ -5,7 +5,7 @@ * Created by: Nicolas Pitre, March 2012 * Copyright: (C) 2012-2013 Linaro Limited * - * Refer to Documentation/arm/cluster-pm-race-avoidance.rst + * Refer to Documentation/arch/arm/cluster-pm-race-avoidance.rst * for details of the synchronisation algorithms used here. */ diff --git a/arch/arm/common/vlock.S b/arch/arm/common/vlock.S index 1fa09c4697ed..c5eaed5a76f0 100644 --- a/arch/arm/common/vlock.S +++ b/arch/arm/common/vlock.S @@ -6,7 +6,7 @@ * Copyright: (C) 2012-2013 Linaro Limited * * This algorithm is described in more detail in - * Documentation/arm/vlocks.rst. + * Documentation/arch/arm/vlocks.rst. */ #include <linux/linkage.h> diff --git a/arch/arm/include/asm/arm_pmuv3.h b/arch/arm/include/asm/arm_pmuv3.h index 78d3d4b82c6c..f3cd04ff022d 100644 --- a/arch/arm/include/asm/arm_pmuv3.h +++ b/arch/arm/include/asm/arm_pmuv3.h @@ -92,7 +92,7 @@ #define RETURN_READ_PMEVCNTRN(n) \ return read_sysreg(PMEVCNTR##n) -static unsigned long read_pmevcntrn(int n) +static inline unsigned long read_pmevcntrn(int n) { PMEVN_SWITCH(n, RETURN_READ_PMEVCNTRN); return 0; @@ -100,14 +100,14 @@ static unsigned long read_pmevcntrn(int n) #define WRITE_PMEVCNTRN(n) \ write_sysreg(val, PMEVCNTR##n) -static void write_pmevcntrn(int n, unsigned long val) +static inline void write_pmevcntrn(int n, unsigned long val) { PMEVN_SWITCH(n, WRITE_PMEVCNTRN); } #define WRITE_PMEVTYPERN(n) \ write_sysreg(val, PMEVTYPER##n) -static void write_pmevtypern(int n, unsigned long val) +static inline void write_pmevtypern(int n, unsigned long val) { PMEVN_SWITCH(n, WRITE_PMEVTYPERN); } @@ -222,6 +222,11 @@ static inline bool kvm_pmu_counter_deferred(struct perf_event_attr *attr) return false; } +static inline bool kvm_set_pmuserenr(u64 val) +{ + return false; +} + /* PMU Version in DFR Register */ #define ARMV8_PMU_DFR_VER_NI 0 #define ARMV8_PMU_DFR_VER_V3P4 0x5 diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 505a306e0271..aebe2c8f6a68 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -394,6 +394,23 @@ ALT_UP_B(.L0_\@) #endif .endm +/* + * Raw SMP data memory barrier + */ + .macro __smp_dmb mode +#if __LINUX_ARM_ARCH__ >= 7 + .ifeqs "\mode","arm" + dmb ish + .else + W(dmb) ish + .endif +#elif __LINUX_ARM_ARCH__ == 6 + mcr p15, 0, r0, c7, c10, 5 @ dmb +#else + .error "Incompatible SMP platform" +#endif + .endm + #if defined(CONFIG_CPU_V7M) /* * setmode is used to assert to be in svc mode during boot. For v7-M diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h index db8512d9a918..f0e3b01afa74 100644 --- a/arch/arm/include/asm/atomic.h +++ b/arch/arm/include/asm/atomic.h @@ -197,6 +197,16 @@ static inline int arch_atomic_fetch_##op(int i, atomic_t *v) \ return val; \ } +#define arch_atomic_add_return arch_atomic_add_return +#define arch_atomic_sub_return arch_atomic_sub_return +#define arch_atomic_fetch_add arch_atomic_fetch_add +#define arch_atomic_fetch_sub arch_atomic_fetch_sub + +#define arch_atomic_fetch_and arch_atomic_fetch_and +#define arch_atomic_fetch_andnot arch_atomic_fetch_andnot +#define arch_atomic_fetch_or arch_atomic_fetch_or +#define arch_atomic_fetch_xor arch_atomic_fetch_xor + static inline int arch_atomic_cmpxchg(atomic_t *v, int old, int new) { int ret; @@ -210,8 +220,7 @@ static inline int arch_atomic_cmpxchg(atomic_t *v, int old, int new) return ret; } - -#define arch_atomic_fetch_andnot arch_atomic_fetch_andnot +#define arch_atomic_cmpxchg arch_atomic_cmpxchg #endif /* __LINUX_ARM_ARCH__ */ @@ -240,8 +249,6 @@ ATOMIC_OPS(xor, ^=, eor) #undef ATOMIC_OP_RETURN #undef ATOMIC_OP -#define arch_atomic_xchg(v, new) (arch_xchg(&((v)->counter), new)) - #ifndef CONFIG_GENERIC_ATOMIC64 typedef struct { s64 counter; diff --git a/arch/arm/include/asm/bugs.h b/arch/arm/include/asm/bugs.h index 97a312ba0840..fe385551edec 100644 --- a/arch/arm/include/asm/bugs.h +++ b/arch/arm/include/asm/bugs.h @@ -1,7 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0-only */ /* - * arch/arm/include/asm/bugs.h - * * Copyright (C) 1995-2003 Russell King */ #ifndef __ASM_BUGS_H @@ -10,10 +8,8 @@ extern void check_writebuffer_bugs(void); #ifdef CONFIG_MMU -extern void check_bugs(void); extern void check_other_bugs(void); #else -#define check_bugs() do { } while (0) #define check_other_bugs() do { } while (0) #endif diff --git a/arch/arm/include/asm/fb.h b/arch/arm/include/asm/fb.h index d92e99cd8c8a..ce20a43c3033 100644 --- a/arch/arm/include/asm/fb.h +++ b/arch/arm/include/asm/fb.h @@ -1,19 +1,6 @@ #ifndef _ASM_FB_H_ #define _ASM_FB_H_ -#include <linux/fb.h> -#include <linux/fs.h> -#include <asm/page.h> - -static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, - unsigned long off) -{ - vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); -} - -static inline int fb_is_primary_device(struct fb_info *info) -{ - return 0; -} +#include <asm-generic/fb.h> #endif /* _ASM_FB_H_ */ diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h index 7e9251ca29fe..5be3ddc96a50 100644 --- a/arch/arm/include/asm/ftrace.h +++ b/arch/arm/include/asm/ftrace.h @@ -75,6 +75,10 @@ static inline bool arch_syscall_match_sym_name(const char *sym, return !strcasecmp(sym, name); } +void prepare_ftrace_return(unsigned long *parent, unsigned long self, + unsigned long frame_pointer, + unsigned long stack_pointer); + #endif /* ifndef __ASSEMBLY__ */ #endif /* _ASM_ARM_FTRACE */ diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h index a7c2337b0c7d..18605f1b3580 100644 --- a/arch/arm/include/asm/irq.h +++ b/arch/arm/include/asm/irq.h @@ -27,7 +27,6 @@ struct irqaction; struct pt_regs; void handle_IRQ(unsigned int, struct pt_regs *); -void init_IRQ(void); #ifdef CONFIG_SMP #include <linux/cpumask.h> diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index 9349e7a82c9c..2b18a258204d 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -56,7 +56,6 @@ struct machine_desc { void (*init_time)(void); void (*init_machine)(void); void (*init_late)(void); - void (*handle_irq)(struct pt_regs *); void (*restart)(enum reboot_mode, const char *); }; diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h index 74bb5947b387..28c63d172a96 100644 --- a/arch/arm/include/asm/page.h +++ b/arch/arm/include/asm/page.h @@ -113,6 +113,28 @@ struct cpu_user_fns { unsigned long vaddr, struct vm_area_struct *vma); }; +void fa_copy_user_highpage(struct page *to, struct page *from, + unsigned long vaddr, struct vm_area_struct *vma); +void fa_clear_user_highpage(struct page *page, unsigned long vaddr); +void feroceon_copy_user_highpage(struct page *to, struct page *from, + unsigned long vaddr, struct vm_area_struct *vma); +void feroceon_clear_user_highpage(struct page *page, unsigned long vaddr); +void v4_mc_copy_user_highpage(struct page *to, struct page *from, + unsigned long vaddr, struct vm_area_struct *vma); +void v4_mc_clear_user_highpage(struct page *page, unsigned long vaddr); +void v4wb_copy_user_highpage(struct page *to, struct page *from, + unsigned long vaddr, struct vm_area_struct *vma); +void v4wb_clear_user_highpage(struct page *page, unsigned long vaddr); +void v4wt_copy_user_highpage(struct page *to, struct page *from, + unsigned long vaddr, struct vm_area_struct *vma); +void v4wt_clear_user_highpage(struct page *page, unsigned long vaddr); +void xsc3_mc_copy_user_highpage(struct page *to, struct page *from, + unsigned long vaddr, struct vm_area_struct *vma); +void xsc3_mc_clear_user_highpage(struct page *page, unsigned long vaddr); +void xscale_mc_copy_user_highpage(struct page *to, struct page *from, + unsigned long vaddr, struct vm_area_struct *vma); +void xscale_mc_clear_user_highpage(struct page *page, unsigned long vaddr); + #ifdef MULTI_USER extern struct cpu_user_fns cpu_user; diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h index 483b8ddfcb82..7f44e88d1f25 100644 --- a/arch/arm/include/asm/ptrace.h +++ b/arch/arm/include/asm/ptrace.h @@ -193,5 +193,8 @@ static inline unsigned long it_advance(unsigned long cpsr) return cpsr; } +int syscall_trace_enter(struct pt_regs *regs); +void syscall_trace_exit(struct pt_regs *regs); + #endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index ba0872a8dcda..546af8b1e3f6 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -5,7 +5,7 @@ * Copyright (C) 1997-1999 Russell King * * Structure passed to kernel to tell it about the - * hardware it's running on. See Documentation/arm/setup.rst + * hardware it's running on. See Documentation/arch/arm/setup.rst * for more info. */ #ifndef __ASMARM_SETUP_H @@ -28,4 +28,11 @@ extern void save_atags(const struct tag *tags); static inline void save_atags(const struct tag *tags) { } #endif +struct machine_desc; +void init_default_cache_policy(unsigned long); +void paging_init(const struct machine_desc *desc); +void early_mm_init(const struct machine_desc *); +void adjust_lowmem_bounds(void); +void setup_dma_zone(const struct machine_desc *desc); + #endif diff --git a/arch/arm/include/asm/signal.h b/arch/arm/include/asm/signal.h index 430be7774402..8b84092d1518 100644 --- a/arch/arm/include/asm/signal.h +++ b/arch/arm/include/asm/signal.h @@ -22,4 +22,9 @@ typedef struct { #define __ARCH_HAS_SA_RESTORER #include <asm/sigcontext.h> + +void do_rseq_syscall(struct pt_regs *regs); +int do_work_pending(struct pt_regs *regs, unsigned int thread_flags, + int syscall); + #endif diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index 7c1c90d9f582..8c05a7f374d8 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -64,7 +64,7 @@ extern void secondary_startup_arm(void); extern int __cpu_disable(void); -extern void __cpu_die(unsigned int cpu); +static inline void __cpu_die(unsigned int cpu) { } extern void arch_send_call_function_single_ipi(int cpu); extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); diff --git a/arch/arm/include/asm/spectre.h b/arch/arm/include/asm/spectre.h index 85f9e538fb32..d9c28b3b6b62 100644 --- a/arch/arm/include/asm/spectre.h +++ b/arch/arm/include/asm/spectre.h @@ -35,4 +35,8 @@ static inline void spectre_v2_update_state(unsigned int state, int spectre_bhb_update_vectors(unsigned int method); +void cpu_v7_ca8_ibe(void); +void cpu_v7_ca15_ibe(void); +void cpu_v7_bugs_init(void); + #endif diff --git a/arch/arm/include/asm/suspend.h b/arch/arm/include/asm/suspend.h index 506314265c6f..be81b9ca2ea1 100644 --- a/arch/arm/include/asm/suspend.h +++ b/arch/arm/include/asm/suspend.h @@ -13,5 +13,6 @@ extern void cpu_resume(void); extern void cpu_resume_no_hyp(void); extern void cpu_resume_arm(void); extern int cpu_suspend(unsigned long, int (*)(unsigned long)); +extern void __cpu_suspend_save(u32 *ptr, u32 ptrsz, u32 sp, u32 *save_ptr); #endif diff --git a/arch/arm/include/asm/sync_bitops.h b/arch/arm/include/asm/sync_bitops.h index 6f5d627c44a3..f46b3c570f92 100644 --- a/arch/arm/include/asm/sync_bitops.h +++ b/arch/arm/include/asm/sync_bitops.h @@ -14,14 +14,35 @@ * ops which are SMP safe even on a UP kernel. */ +/* + * Unordered + */ + #define sync_set_bit(nr, p) _set_bit(nr, p) #define sync_clear_bit(nr, p) _clear_bit(nr, p) #define sync_change_bit(nr, p) _change_bit(nr, p) -#define sync_test_and_set_bit(nr, p) _test_and_set_bit(nr, p) -#define sync_test_and_clear_bit(nr, p) _test_and_clear_bit(nr, p) -#define sync_test_and_change_bit(nr, p) _test_and_change_bit(nr, p) #define sync_test_bit(nr, addr) test_bit(nr, addr) -#define arch_sync_cmpxchg arch_cmpxchg +/* + * Fully ordered + */ + +int _sync_test_and_set_bit(int nr, volatile unsigned long * p); +#define sync_test_and_set_bit(nr, p) _sync_test_and_set_bit(nr, p) + +int _sync_test_and_clear_bit(int nr, volatile unsigned long * p); +#define sync_test_and_clear_bit(nr, p) _sync_test_and_clear_bit(nr, p) + +int _sync_test_and_change_bit(int nr, volatile unsigned long * p); +#define sync_test_and_change_bit(nr, p) _sync_test_and_change_bit(nr, p) + +#define arch_sync_cmpxchg(ptr, old, new) \ +({ \ + __typeof__(*(ptr)) __ret; \ + __smp_mb__before_atomic(); \ + __ret = arch_cmpxchg_relaxed((ptr), (old), (new)); \ + __smp_mb__after_atomic(); \ + __ret; \ +}) #endif diff --git a/arch/arm/include/asm/syscalls.h b/arch/arm/include/asm/syscalls.h new file mode 100644 index 000000000000..5912e7cffa6a --- /dev/null +++ b/arch/arm/include/asm/syscalls.h @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef __ASM_SYSCALLS_H +#define __ASM_SYSCALLS_H + +#include <linux/linkage.h> +#include <linux/types.h> + +struct pt_regs; +asmlinkage int sys_sigreturn(struct pt_regs *regs); +asmlinkage int sys_rt_sigreturn(struct pt_regs *regs); +asmlinkage long sys_arm_fadvise64_64(int fd, int advice, + loff_t offset, loff_t len); + +struct oldabi_stat64; +asmlinkage long sys_oabi_stat64(const char __user * filename, + struct oldabi_stat64 __user * statbuf); +asmlinkage long sys_oabi_lstat64(const char __user * filename, + struct oldabi_stat64 __user * statbuf); +asmlinkage long sys_oabi_fstat64(unsigned long fd, + struct oldabi_stat64 __user * statbuf); +asmlinkage long sys_oabi_fstatat64(int dfd, + const char __user *filename, + struct oldabi_stat64 __user *statbuf, + int flag); +asmlinkage long sys_oabi_fcntl64(unsigned int fd, unsigned int cmd, + unsigned long arg); +struct oabi_epoll_event; +asmlinkage long sys_oabi_epoll_ctl(int epfd, int op, int fd, + struct oabi_epoll_event __user *event); +struct oabi_sembuf; +struct old_timespec32; +asmlinkage long sys_oabi_semtimedop(int semid, + struct oabi_sembuf __user *tsops, + unsigned nsops, + const struct old_timespec32 __user *timeout); +asmlinkage long sys_oabi_semop(int semid, struct oabi_sembuf __user *tsops, + unsigned nsops); +asmlinkage int sys_oabi_ipc(uint call, int first, int second, int third, + void __user *ptr, long fifth); +struct sockaddr; +asmlinkage long sys_oabi_bind(int fd, struct sockaddr __user *addr, int addrlen); +asmlinkage long sys_oabi_connect(int fd, struct sockaddr __user *addr, int addrlen); +asmlinkage long sys_oabi_sendto(int fd, void __user *buff, + size_t len, unsigned flags, + struct sockaddr __user *addr, + int addrlen); +struct user_msghdr; +asmlinkage long sys_oabi_sendmsg(int fd, struct user_msghdr __user *msg, unsigned flags); +asmlinkage long sys_oabi_socketcall(int call, unsigned long __user *args); + +#endif diff --git a/arch/arm/include/asm/tcm.h b/arch/arm/include/asm/tcm.h index d8bd8a4b0ede..e1f7dca86a22 100644 --- a/arch/arm/include/asm/tcm.h +++ b/arch/arm/include/asm/tcm.h @@ -9,9 +9,7 @@ #ifndef __ASMARM_TCM_H #define __ASMARM_TCM_H -#ifndef CONFIG_HAVE_TCM -#error "You should not be including tcm.h unless you have a TCM!" -#endif +#ifdef CONFIG_HAVE_TCM #include <linux/compiler.h> @@ -29,4 +27,11 @@ void tcm_free(void *addr, size_t len); bool tcm_dtcm_present(void); bool tcm_itcm_present(void); +void __init tcm_init(void); +#else +/* No TCM support, just blank inlines to be optimized out */ +static inline void tcm_init(void) +{ +} +#endif #endif diff --git a/arch/arm/include/asm/traps.h b/arch/arm/include/asm/traps.h index 987fefb0a4db..0aaefe3e1700 100644 --- a/arch/arm/include/asm/traps.h +++ b/arch/arm/include/asm/traps.h @@ -35,4 +35,13 @@ extern void ptrace_break(struct pt_regs *regs); extern void *vectors_page; +asmlinkage void dump_backtrace_stm(u32 *stack, u32 instruction, const char *loglvl); +asmlinkage void do_undefinstr(struct pt_regs *regs); +asmlinkage void handle_fiq_as_nmi(struct pt_regs *regs); +asmlinkage void bad_mode(struct pt_regs *regs, int reason); +asmlinkage int arm_syscall(int no, struct pt_regs *regs); +asmlinkage void baddataabort(int code, unsigned long instr, struct pt_regs *regs); +asmlinkage void __div0(void); +asmlinkage void handle_bad_stack(struct pt_regs *regs); + #endif diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h index b51f85417f58..d60b09a5acfc 100644 --- a/arch/arm/include/asm/unwind.h +++ b/arch/arm/include/asm/unwind.h @@ -40,6 +40,10 @@ extern void unwind_table_del(struct unwind_table *tab); extern void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk, const char *loglvl); +void __aeabi_unwind_cpp_pr0(void); +void __aeabi_unwind_cpp_pr1(void); +void __aeabi_unwind_cpp_pr2(void); + #endif /* !__ASSEMBLY__ */ #ifdef CONFIG_ARM_UNWIND diff --git a/arch/arm/include/asm/vdso.h b/arch/arm/include/asm/vdso.h index 5b85889f82ee..422c3afa806a 100644 --- a/arch/arm/include/asm/vdso.h +++ b/arch/arm/include/asm/vdso.h @@ -24,6 +24,11 @@ static inline void arm_install_vdso(struct mm_struct *mm, unsigned long addr) #endif /* CONFIG_VDSO */ +int __vdso_clock_gettime(clockid_t clock, struct old_timespec32 *ts); +int __vdso_clock_gettime64(clockid_t clock, struct __kernel_timespec *ts); +int __vdso_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz); +int __vdso_clock_getres(clockid_t clock_id, struct old_timespec32 *res); + #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ diff --git a/arch/arm/include/asm/vfp.h b/arch/arm/include/asm/vfp.h index 157ea3426158..5b57b8768bac 100644 --- a/arch/arm/include/asm/vfp.h +++ b/arch/arm/include/asm/vfp.h @@ -102,6 +102,7 @@ #ifndef __ASSEMBLY__ void vfp_disable(void); +void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs); #endif #endif /* __ASM_VFP_H */ diff --git a/arch/arm/include/uapi/asm/setup.h b/arch/arm/include/uapi/asm/setup.h index 25ceda63b284..8e50e034fec7 100644 --- a/arch/arm/include/uapi/asm/setup.h +++ b/arch/arm/include/uapi/asm/setup.h @@ -9,7 +9,7 @@ * published by the Free Software Foundation. * * Structure passed to kernel to tell it about the - * hardware it's running on. See Documentation/arm/setup.rst + * hardware it's running on. See Documentation/arch/arm/setup.rst * for more info. */ #ifndef _UAPI__ASMARM_SETUP_H diff --git a/arch/arm/kernel/atags_parse.c b/arch/arm/kernel/atags_parse.c index 373b61f9a4f0..33f6eb5213a5 100644 --- a/arch/arm/kernel/atags_parse.c +++ b/arch/arm/kernel/atags_parse.c @@ -127,7 +127,7 @@ static int __init parse_tag_cmdline(const struct tag *tag) #elif defined(CONFIG_CMDLINE_FORCE) pr_warn("Ignoring tag cmdline (using the default kernel command line)\n"); #else - strlcpy(default_command_line, tag->u.cmdline.cmdline, + strscpy(default_command_line, tag->u.cmdline.cmdline, COMMAND_LINE_SIZE); #endif return 0; @@ -224,7 +224,7 @@ setup_machine_tags(void *atags_vaddr, unsigned int machine_nr) } /* parse_early_param needs a boot_command_line */ - strlcpy(boot_command_line, from, COMMAND_LINE_SIZE); + strscpy(boot_command_line, from, COMMAND_LINE_SIZE); return mdesc; } diff --git a/arch/arm/kernel/bugs.c b/arch/arm/kernel/bugs.c index 14c8dbbb7d2d..087bce6ec8e9 100644 --- a/arch/arm/kernel/bugs.c +++ b/arch/arm/kernel/bugs.c @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include <linux/init.h> +#include <linux/cpu.h> #include <asm/bugs.h> #include <asm/proc-fns.h> @@ -11,7 +12,7 @@ void check_other_bugs(void) #endif } -void __init check_bugs(void) +void __init arch_cpu_finalize_init(void) { check_writebuffer_bugs(); check_other_bugs(); diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index c39303e5c234..291dc48d6bed 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -875,7 +875,7 @@ ENDPROC(__bad_stack) * existing ones. This mechanism should be used only for things that are * really small and justified, and not be abused freely. * - * See Documentation/arm/kernel_user_helpers.rst for formal definitions. + * See Documentation/arch/arm/kernel_user_helpers.rst for formal definitions. */ THUMB( .arm ) diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c index 98ca3e3fa847..d2c8e5313539 100644 --- a/arch/arm/kernel/fiq.c +++ b/arch/arm/kernel/fiq.c @@ -45,6 +45,7 @@ #include <asm/cacheflush.h> #include <asm/cp15.h> #include <asm/fiq.h> +#include <asm/mach/irq.h> #include <asm/irq.h> #include <asm/traps.h> diff --git a/arch/arm/kernel/head-inflate-data.c b/arch/arm/kernel/head-inflate-data.c index 89a52104d32a..225c0699a12c 100644 --- a/arch/arm/kernel/head-inflate-data.c +++ b/arch/arm/kernel/head-inflate-data.c @@ -8,16 +8,13 @@ #include <linux/init.h> #include <linux/zutil.h> +#include "head.h" /* for struct inflate_state */ #include "../../../lib/zlib_inflate/inftrees.h" #include "../../../lib/zlib_inflate/inflate.h" #include "../../../lib/zlib_inflate/infutil.h" -extern char __data_loc[]; -extern char _edata_loc[]; -extern char _sdata[]; - /* * This code is called very early during the boot process to decompress * the .data segment stored compressed in ROM. Therefore none of the global diff --git a/arch/arm/kernel/head.h b/arch/arm/kernel/head.h new file mode 100644 index 000000000000..0eb5accf7141 --- /dev/null +++ b/arch/arm/kernel/head.h @@ -0,0 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0-only + +extern char __data_loc[]; +extern char _edata_loc[]; +extern char _sdata[]; + +int __init __inflate_kernel_data(void); diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index d59c36dc0494..e74d84f58b77 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -169,8 +169,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, offset = __mem_to_opcode_arm(*(u32 *)loc); offset = (offset & 0x00ffffff) << 2; - if (offset & 0x02000000) - offset -= 0x04000000; + offset = sign_extend32(offset, 25); offset += sym->st_value - loc; @@ -236,7 +235,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, case R_ARM_MOVT_PREL: offset = tmp = __mem_to_opcode_arm(*(u32 *)loc); offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff); - offset = (offset ^ 0x8000) - 0x8000; + offset = sign_extend32(offset, 15); offset += sym->st_value; if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_PREL || @@ -344,8 +343,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, ((~(j2 ^ sign) & 1) << 22) | ((upper & 0x03ff) << 12) | ((lower & 0x07ff) << 1); - if (offset & 0x01000000) - offset -= 0x02000000; + offset = sign_extend32(offset, 24); offset += sym->st_value - loc; /* @@ -401,7 +399,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, offset = ((upper & 0x000f) << 12) | ((upper & 0x0400) << 1) | ((lower & 0x7000) >> 4) | (lower & 0x00ff); - offset = (offset ^ 0x8000) - 0x8000; + offset = sign_extend32(offset, 15); offset += sym->st_value; if (ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVT_PREL || diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 75cd4699e7b3..c66b560562b3 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -76,13 +76,6 @@ static int __init fpe_setup(char *line) __setup("fpe=", fpe_setup); #endif -extern void init_default_cache_policy(unsigned long); -extern void paging_init(const struct machine_desc *desc); -extern void early_mm_init(const struct machine_desc *); -extern void adjust_lowmem_bounds(void); -extern enum reboot_mode reboot_mode; -extern void setup_dma_zone(const struct machine_desc *desc); - unsigned int processor_id; EXPORT_SYMBOL(processor_id); unsigned int __machine_arch_type __read_mostly; @@ -1142,7 +1135,7 @@ void __init setup_arch(char **cmdline_p) setup_initial_init_mm(_text, _etext, _edata, _end); /* populate cmd_line too for later use, preserving boot_command_line */ - strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE); + strscpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE); *cmdline_p = cmd_line; early_fixmap_init(); @@ -1198,10 +1191,6 @@ void __init setup_arch(char **cmdline_p) reserve_crashkernel(); -#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER - handle_arch_irq = mdesc->handle_irq; -#endif - #ifdef CONFIG_VT #if defined(CONFIG_VGA_CONSOLE) conswitchp = &vga_con; diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index e07f359254c3..8d0afa11bed5 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -18,6 +18,7 @@ #include <asm/traps.h> #include <asm/unistd.h> #include <asm/vfp.h> +#include <asm/syscalls.h> #include "signal.h" diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 87f8d0e5e314..6756203e45f3 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -288,15 +288,11 @@ int __cpu_disable(void) } /* - * called on the thread which is asking for a CPU to be shutdown - - * waits until shutdown has completed, or it is timed out. + * called on the thread which is asking for a CPU to be shutdown after the + * shutdown completed. */ -void __cpu_die(unsigned int cpu) +void arch_cpuhp_cleanup_dead_cpu(unsigned int cpu) { - if (!cpu_wait_death(cpu, 5)) { - pr_err("CPU%u: cpu didn't die\n", cpu); - return; - } pr_debug("CPU%u: shutdown\n", cpu); clear_tasks_mm_cpumask(cpu); @@ -336,11 +332,11 @@ void __noreturn arch_cpu_idle_dead(void) flush_cache_louis(); /* - * Tell __cpu_die() that this CPU is now safe to dispose of. Once - * this returns, power and/or clocks can be removed at any point - * from this CPU and its cache by platform_cpu_kill(). + * Tell cpuhp_bp_sync_dead() that this CPU is now safe to dispose + * of. Once this returns, power and/or clocks can be removed at + * any point from this CPU and its cache by platform_cpu_kill(). */ - (void)cpu_report_death(); + cpuhp_ap_report_dead(); /* * Ensure that the cache lines associated with that completion are diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c index a5f183cfecb1..0141e9bb02e8 100644 --- a/arch/arm/kernel/sys_arm.c +++ b/arch/arm/kernel/sys_arm.c @@ -24,6 +24,7 @@ #include <linux/ipc.h> #include <linux/uaccess.h> #include <linux/slab.h> +#include <asm/syscalls.h> /* * Since loff_t is a 64 bit type we avoid a lot of ABI hassle diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c index 006163195d67..d00f4040a9f5 100644 --- a/arch/arm/kernel/sys_oabi-compat.c +++ b/arch/arm/kernel/sys_oabi-compat.c @@ -10,6 +10,8 @@ * Copyright: MontaVista Software, Inc. */ +#include <asm/syscalls.h> + /* * The legacy ABI and the new ARM EABI have different rules making some * syscalls incompatible especially with structure arguments. diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 40c7c807d67f..3bad79db5d6e 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -756,6 +756,7 @@ void __readwrite_bug(const char *fn) } EXPORT_SYMBOL(__readwrite_bug); +#ifdef CONFIG_MMU void __pte_error(const char *file, int line, pte_t pte) { pr_err("%s:%d: bad pte %08llx.\n", file, line, (long long)pte_val(pte)); @@ -770,6 +771,7 @@ void __pgd_error(const char *file, int line, pgd_t pgd) { pr_err("%s:%d: bad pgd %08llx.\n", file, line, (long long)pgd_val(pgd)); } +#endif asmlinkage void __div0(void) { diff --git a/arch/arm/kernel/vdso.c b/arch/arm/kernel/vdso.c index 3408269d19c7..f297d66a8a76 100644 --- a/arch/arm/kernel/vdso.c +++ b/arch/arm/kernel/vdso.c @@ -135,7 +135,7 @@ static Elf32_Sym * __init find_symbol(struct elfinfo *lib, const char *symname) if (lib->dynsym[i].st_name == 0) continue; - strlcpy(name, lib->dynstr + lib->dynsym[i].st_name, + strscpy(name, lib->dynstr + lib->dynsym[i].st_name, MAX_SYMNAME); c = strchr(name, '@'); if (c) diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h index 95bd35991288..f069d1b2318e 100644 --- a/arch/arm/lib/bitops.h +++ b/arch/arm/lib/bitops.h @@ -28,7 +28,7 @@ UNWIND( .fnend ) ENDPROC(\name ) .endm - .macro testop, name, instr, store + .macro __testop, name, instr, store, barrier ENTRY( \name ) UNWIND( .fnstart ) ands ip, r1, #3 @@ -38,7 +38,7 @@ UNWIND( .fnstart ) mov r0, r0, lsr #5 add r1, r1, r0, lsl #2 @ Get word offset mov r3, r2, lsl r3 @ create mask - smp_dmb + \barrier #if __LINUX_ARM_ARCH__ >= 7 && defined(CONFIG_SMP) .arch_extension mp ALT_SMP(W(pldw) [r1]) @@ -50,13 +50,21 @@ UNWIND( .fnstart ) strex ip, r2, [r1] cmp ip, #0 bne 1b - smp_dmb + \barrier cmp r0, #0 movne r0, #1 2: bx lr UNWIND( .fnend ) ENDPROC(\name ) .endm + + .macro testop, name, instr, store + __testop \name, \instr, \store, smp_dmb + .endm + + .macro sync_testop, name, instr, store + __testop \name, \instr, \store, __smp_dmb + .endm #else .macro bitop, name, instr ENTRY( \name ) diff --git a/arch/arm/lib/testchangebit.S b/arch/arm/lib/testchangebit.S index 4ebecc67e6e0..f13fe9bc2399 100644 --- a/arch/arm/lib/testchangebit.S +++ b/arch/arm/lib/testchangebit.S @@ -10,3 +10,7 @@ .text testop _test_and_change_bit, eor, str + +#if __LINUX_ARM_ARCH__ >= 6 +sync_testop _sync_test_and_change_bit, eor, str +#endif diff --git a/arch/arm/lib/testclearbit.S b/arch/arm/lib/testclearbit.S index 009afa0f5b4a..4d2c5ca620eb 100644 --- a/arch/arm/lib/testclearbit.S +++ b/arch/arm/lib/testclearbit.S @@ -10,3 +10,7 @@ .text testop _test_and_clear_bit, bicne, strne + +#if __LINUX_ARM_ARCH__ >= 6 +sync_testop _sync_test_and_clear_bit, bicne, strne +#endif diff --git a/arch/arm/lib/testsetbit.S b/arch/arm/lib/testsetbit.S index f3192e55acc8..649dbab65d8d 100644 --- a/arch/arm/lib/testsetbit.S +++ b/arch/arm/lib/testsetbit.S @@ -10,3 +10,7 @@ .text testop _test_and_set_bit, orreq, streq + +#if __LINUX_ARM_ARCH__ >= 6 +sync_testop _sync_test_and_set_bit, orreq, streq +#endif diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c index e4c2677cc1e9..2f6163f05e93 100644 --- a/arch/arm/lib/uaccess_with_memcpy.c +++ b/arch/arm/lib/uaccess_with_memcpy.c @@ -74,6 +74,9 @@ pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp) return 0; pte = pte_offset_map_lock(current->mm, pmd, addr, &ptl); + if (unlikely(!pte)) + return 0; + if (unlikely(!pte_present(*pte) || !pte_young(*pte) || !pte_write(*pte) || !pte_dirty(*pte))) { pte_unmap_unlock(pte, ptl); diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 60dc56d8acfb..437dd0352fd4 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -334,16 +334,14 @@ static bool at91_pm_eth_quirk_is_valid(struct at91_pm_quirk_eth *eth) pdev = of_find_device_by_node(eth->np); if (!pdev) return false; + /* put_device(eth->dev) is called at the end of suspend. */ eth->dev = &pdev->dev; } /* No quirks if device isn't a wakeup source. */ - if (!device_may_wakeup(eth->dev)) { - put_device(eth->dev); + if (!device_may_wakeup(eth->dev)) return false; - } - /* put_device(eth->dev) is called at the end of suspend. */ return true; } @@ -439,14 +437,14 @@ clk_unconfigure: pr_err("AT91: PM: failed to enable %s clocks\n", j == AT91_PM_G_ETH ? "geth" : "eth"); } - } else { - /* - * Release the reference to eth->dev taken in - * at91_pm_eth_quirk_is_valid(). - */ - put_device(eth->dev); - eth->dev = NULL; } + + /* + * Release the reference to eth->dev taken in + * at91_pm_eth_quirk_is_valid(). + */ + put_device(eth->dev); + eth->dev = NULL; } return ret; diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 29eb075b24a4..b5287ff1c542 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -106,7 +106,7 @@ void exynos_firmware_init(void); #define C2_STATE (1 << 3) /* * Magic values for bootloader indicating chosen low power mode. - * See also Documentation/arm/samsung/bootloader-interface.rst + * See also Documentation/arch/arm/samsung/bootloader-interface.rst */ #define EXYNOS_SLEEP_MAGIC 0x00000bad #define EXYNOS_AFTR_MAGIC 0xfcba0d10 diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 51e47053c816..3faf9a1e3e36 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -11,7 +11,6 @@ #include <linux/err.h> #include <linux/gpio.h> #include <linux/init.h> -#include <linux/irqchip/mxs.h> #include <linux/reboot.h> #include <linux/micrel_phy.h> #include <linux/of_address.h> @@ -472,7 +471,6 @@ static const char *const mxs_dt_compat[] __initconst = { }; DT_MACHINE_START(MXS, "Freescale MXS (Device Tree)") - .handle_irq = icoll_handle_irq, .init_machine = mxs_machine_init, .init_late = mxs_pm_init, .dt_compat = mxs_dt_compat, diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 9108c871d129..9808cd27e2cf 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -11,7 +11,6 @@ #include <linux/gpio/driver.h> #include <linux/gpio/machine.h> #include <linux/gpio/consumer.h> -#include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/input.h> @@ -877,7 +876,6 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") .map_io = ams_delta_map_io, .init_early = omap1_init_early, .init_irq = omap1_init_irq, - .handle_irq = omap1_handle_irq, .init_machine = ams_delta_init, .init_late = ams_delta_init_late, .init_time = omap1_timer_init, diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index a501a473ffd6..3312ef93355d 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -6,17 +6,18 @@ */ #include <linux/clkdev.h> #include <linux/irq.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/gpio/machine.h> +#include <linux/gpio/property.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/mutex.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/input.h> #include <linux/omapfb.h> #include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> #include <linux/workqueue.h> #include <linux/delay.h> @@ -35,6 +36,25 @@ #include "clock.h" #include "mmc.h" +static const struct software_node nokia770_mpuio_gpiochip_node = { + .name = "mpuio", +}; + +static const struct software_node nokia770_gpiochip1_node = { + .name = "gpio-0-15", +}; + +static const struct software_node nokia770_gpiochip2_node = { + .name = "gpio-16-31", +}; + +static const struct software_node *nokia770_gpiochip_nodes[] = { + &nokia770_mpuio_gpiochip_node, + &nokia770_gpiochip1_node, + &nokia770_gpiochip2_node, + NULL +}; + #define ADS7846_PENDOWN_GPIO 15 static const unsigned int nokia770_keymap[] = { @@ -85,40 +105,47 @@ static struct platform_device *nokia770_devices[] __initdata = { &nokia770_kp_device, }; -static void mipid_shutdown(struct mipid_platform_data *pdata) -{ - if (pdata->nreset_gpio != -1) { - printk(KERN_INFO "shutdown LCD\n"); - gpio_set_value(pdata->nreset_gpio, 0); - msleep(120); - } -} - -static struct mipid_platform_data nokia770_mipid_platform_data = { - .shutdown = mipid_shutdown, -}; +static struct mipid_platform_data nokia770_mipid_platform_data = { }; static const struct omap_lcd_config nokia770_lcd_config __initconst = { .ctrl_name = "hwa742", }; +static const struct property_entry nokia770_mipid_props[] = { + PROPERTY_ENTRY_GPIO("reset-gpios", &nokia770_gpiochip1_node, + 13, GPIO_ACTIVE_LOW), + { } +}; + +static const struct software_node nokia770_mipid_swnode = { + .name = "lcd_mipid", + .properties = nokia770_mipid_props, +}; + static void __init mipid_dev_init(void) { - nokia770_mipid_platform_data.nreset_gpio = 13; nokia770_mipid_platform_data.data_lines = 16; omapfb_set_lcd_config(&nokia770_lcd_config); } -static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata = { - .x_max = 0x0fff, - .y_max = 0x0fff, - .x_plate_ohms = 180, - .pressure_max = 255, - .debounce_max = 10, - .debounce_tol = 3, - .debounce_rep = 1, - .gpio_pendown = ADS7846_PENDOWN_GPIO, +static const struct property_entry nokia770_ads7846_props[] = { + PROPERTY_ENTRY_STRING("compatible", "ti,ads7846"), + PROPERTY_ENTRY_U32("touchscreen-size-x", 4096), + PROPERTY_ENTRY_U32("touchscreen-size-y", 4096), + PROPERTY_ENTRY_U32("touchscreen-max-pressure", 256), + PROPERTY_ENTRY_U32("touchscreen-average-samples", 10), + PROPERTY_ENTRY_U16("ti,x-plate-ohms", 180), + PROPERTY_ENTRY_U16("ti,debounce-tol", 3), + PROPERTY_ENTRY_U16("ti,debounce-rep", 1), + PROPERTY_ENTRY_GPIO("pendown-gpios", &nokia770_gpiochip1_node, + ADS7846_PENDOWN_GPIO, GPIO_ACTIVE_LOW), + { } +}; + +static const struct software_node nokia770_ads7846_swnode = { + .name = "ads7846", + .properties = nokia770_ads7846_props, }; static struct spi_board_info nokia770_spi_board_info[] __initdata = { @@ -128,13 +155,14 @@ static struct spi_board_info nokia770_spi_board_info[] __initdata = { .chip_select = 3, .max_speed_hz = 12000000, .platform_data = &nokia770_mipid_platform_data, + .swnode = &nokia770_mipid_swnode, }, [1] = { .modalias = "ads7846", .bus_num = 2, .chip_select = 0, .max_speed_hz = 2500000, - .platform_data = &nokia770_ads7846_platform_data, + .swnode = &nokia770_ads7846_swnode, }, }; @@ -156,27 +184,23 @@ static struct omap_usb_config nokia770_usb_config __initdata = { #if IS_ENABLED(CONFIG_MMC_OMAP) -#define NOKIA770_GPIO_MMC_POWER 41 -#define NOKIA770_GPIO_MMC_SWITCH 23 - -static int nokia770_mmc_set_power(struct device *dev, int slot, int power_on, - int vdd) -{ - gpio_set_value(NOKIA770_GPIO_MMC_POWER, power_on); - return 0; -} - -static int nokia770_mmc_get_cover_state(struct device *dev, int slot) -{ - return gpio_get_value(NOKIA770_GPIO_MMC_SWITCH); -} +static struct gpiod_lookup_table nokia770_mmc_gpio_table = { + .dev_id = "mmci-omap.1", + .table = { + /* Slot index 0, VSD power, GPIO 41 */ + GPIO_LOOKUP_IDX("gpio-32-47", 9, + "vsd", 0, GPIO_ACTIVE_HIGH), + /* Slot index 0, switch, GPIO 23 */ + GPIO_LOOKUP_IDX("gpio-16-31", 7, + "cover", 0, GPIO_ACTIVE_HIGH), + { } + }, +}; static struct omap_mmc_platform_data nokia770_mmc2_data = { .nr_slots = 1, .max_freq = 12000000, .slots[0] = { - .set_power = nokia770_mmc_set_power, - .get_cover_state = nokia770_mmc_get_cover_state, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .name = "mmcblk", }, @@ -186,20 +210,7 @@ static struct omap_mmc_platform_data *nokia770_mmc_data[OMAP16XX_NR_MMC]; static void __init nokia770_mmc_init(void) { - int ret; - - ret = gpio_request(NOKIA770_GPIO_MMC_POWER, "MMC power"); - if (ret < 0) - return; - gpio_direction_output(NOKIA770_GPIO_MMC_POWER, 0); - - ret = gpio_request(NOKIA770_GPIO_MMC_SWITCH, "MMC cover"); - if (ret < 0) { - gpio_free(NOKIA770_GPIO_MMC_POWER); - return; - } - gpio_direction_input(NOKIA770_GPIO_MMC_SWITCH); - + gpiod_add_lookup_table(&nokia770_mmc_gpio_table); /* Only the second MMC controller is used */ nokia770_mmc_data[1] = &nokia770_mmc2_data; omap1_init_mmc(nokia770_mmc_data, OMAP16XX_NR_MMC); @@ -212,14 +223,16 @@ static inline void nokia770_mmc_init(void) #endif #if IS_ENABLED(CONFIG_I2C_CBUS_GPIO) -static struct gpiod_lookup_table nokia770_cbus_gpio_table = { - .dev_id = "i2c-cbus-gpio.2", - .table = { - GPIO_LOOKUP_IDX("mpuio", 9, NULL, 0, 0), /* clk */ - GPIO_LOOKUP_IDX("mpuio", 10, NULL, 1, 0), /* dat */ - GPIO_LOOKUP_IDX("mpuio", 11, NULL, 2, 0), /* sel */ - { }, - }, + +static const struct software_node_ref_args nokia770_cbus_gpio_refs[] = { + SOFTWARE_NODE_REFERENCE(&nokia770_mpuio_gpiochip_node, 9, 0), + SOFTWARE_NODE_REFERENCE(&nokia770_mpuio_gpiochip_node, 10, 0), + SOFTWARE_NODE_REFERENCE(&nokia770_mpuio_gpiochip_node, 11, 0), +}; + +static const struct property_entry nokia770_cbus_props[] = { + PROPERTY_ENTRY_REF_ARRAY("gpios", nokia770_cbus_gpio_refs), + { } }; static struct platform_device nokia770_cbus_device = { @@ -238,22 +251,29 @@ static struct i2c_board_info nokia770_i2c_board_info_2[] __initdata = { static void __init nokia770_cbus_init(void) { - const int retu_irq_gpio = 62; - const int tahvo_irq_gpio = 40; - - if (gpio_request_one(retu_irq_gpio, GPIOF_IN, "Retu IRQ")) - return; - if (gpio_request_one(tahvo_irq_gpio, GPIOF_IN, "Tahvo IRQ")) { - gpio_free(retu_irq_gpio); - return; + struct gpio_desc *d; + int irq; + + d = gpiod_get(NULL, "retu_irq", GPIOD_IN); + if (IS_ERR(d)) { + pr_err("Unable to get CBUS Retu IRQ GPIO descriptor\n"); + } else { + irq = gpiod_to_irq(d); + irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING); + nokia770_i2c_board_info_2[0].irq = irq; + } + d = gpiod_get(NULL, "tahvo_irq", GPIOD_IN); + if (IS_ERR(d)) { + pr_err("Unable to get CBUS Tahvo IRQ GPIO descriptor\n"); + } else { + irq = gpiod_to_irq(d); + irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING); + nokia770_i2c_board_info_2[1].irq = irq; } - irq_set_irq_type(gpio_to_irq(retu_irq_gpio), IRQ_TYPE_EDGE_RISING); - irq_set_irq_type(gpio_to_irq(tahvo_irq_gpio), IRQ_TYPE_EDGE_RISING); - nokia770_i2c_board_info_2[0].irq = gpio_to_irq(retu_irq_gpio); - nokia770_i2c_board_info_2[1].irq = gpio_to_irq(tahvo_irq_gpio); i2c_register_board_info(2, nokia770_i2c_board_info_2, ARRAY_SIZE(nokia770_i2c_board_info_2)); - gpiod_add_lookup_table(&nokia770_cbus_gpio_table); + device_create_managed_software_node(&nokia770_cbus_device.dev, + nokia770_cbus_props, NULL); platform_device_register(&nokia770_cbus_device); } #else /* CONFIG_I2C_CBUS_GPIO */ @@ -262,8 +282,33 @@ static void __init nokia770_cbus_init(void) } #endif /* CONFIG_I2C_CBUS_GPIO */ +static struct gpiod_lookup_table nokia770_irq_gpio_table = { + .dev_id = NULL, + .table = { + /* GPIO used by SPI device 1 */ + GPIO_LOOKUP("gpio-0-15", 15, "ads7846_irq", + GPIO_ACTIVE_HIGH), + /* GPIO used for retu IRQ */ + GPIO_LOOKUP("gpio-48-63", 15, "retu_irq", + GPIO_ACTIVE_HIGH), + /* GPIO used for tahvo IRQ */ + GPIO_LOOKUP("gpio-32-47", 8, "tahvo_irq", + GPIO_ACTIVE_HIGH), + /* GPIOs used by serial wakeup IRQs */ + GPIO_LOOKUP_IDX("gpio-32-47", 5, "wakeup", 0, + GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("gpio-16-31", 2, "wakeup", 1, + GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("gpio-48-63", 1, "wakeup", 2, + GPIO_ACTIVE_HIGH), + { } + }, +}; + static void __init omap_nokia770_init(void) { + struct gpio_desc *d; + /* On Nokia 770, the SleepX signal is masked with an * MPUIO line by default. It has to be unmasked for it * to become functional */ @@ -273,8 +318,16 @@ static void __init omap_nokia770_init(void) /* Unmask SleepX signal */ omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004); + software_node_register_node_group(nokia770_gpiochip_nodes); platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices)); - nokia770_spi_board_info[1].irq = gpio_to_irq(15); + + gpiod_add_lookup_table(&nokia770_irq_gpio_table); + d = gpiod_get(NULL, "ads7846_irq", GPIOD_IN); + if (IS_ERR(d)) + pr_err("Unable to get ADS7846 IRQ GPIO descriptor\n"); + else + nokia770_spi_board_info[1].irq = gpiod_to_irq(d); + spi_register_board_info(nokia770_spi_board_info, ARRAY_SIZE(nokia770_spi_board_info)); omap_serial_init(); @@ -291,7 +344,6 @@ MACHINE_START(NOKIA770, "Nokia 770") .map_io = omap1_map_io, .init_early = omap1_init_early, .init_irq = omap1_init_irq, - .handle_irq = omap1_handle_irq, .init_machine = omap_nokia770_init, .init_late = omap1_init_late, .init_time = omap1_timer_init, diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index df758c1f9237..7d5e6f9039d5 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -25,7 +25,8 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> +#include <linux/gpio/driver.h> #include <linux/gpio/machine.h> #include <linux/kernel.h> #include <linux/init.h> @@ -64,13 +65,12 @@ /* TPS65010 has four GPIOs. nPG and LED2 can be treated like GPIOs with * alternate pin configurations for hardware-controlled blinking. */ -#define OSK_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */) -# define OSK_TPS_GPIO_USB_PWR_EN (OSK_TPS_GPIO_BASE + 0) -# define OSK_TPS_GPIO_LED_D3 (OSK_TPS_GPIO_BASE + 1) -# define OSK_TPS_GPIO_LAN_RESET (OSK_TPS_GPIO_BASE + 2) -# define OSK_TPS_GPIO_DSP_PWR_EN (OSK_TPS_GPIO_BASE + 3) -# define OSK_TPS_GPIO_LED_D9 (OSK_TPS_GPIO_BASE + 4) -# define OSK_TPS_GPIO_LED_D2 (OSK_TPS_GPIO_BASE + 5) +#define OSK_TPS_GPIO_USB_PWR_EN 0 +#define OSK_TPS_GPIO_LED_D3 1 +#define OSK_TPS_GPIO_LAN_RESET 2 +#define OSK_TPS_GPIO_DSP_PWR_EN 3 +#define OSK_TPS_GPIO_LED_D9 4 +#define OSK_TPS_GPIO_LED_D2 5 static struct mtd_partition osk_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ @@ -174,11 +174,20 @@ static const struct gpio_led tps_leds[] = { /* NOTE: D9 and D2 have hardware blink support. * Also, D9 requires non-battery power. */ - { .gpio = OSK_TPS_GPIO_LED_D9, .name = "d9", - .default_trigger = "disk-activity", }, - { .gpio = OSK_TPS_GPIO_LED_D2, .name = "d2", }, - { .gpio = OSK_TPS_GPIO_LED_D3, .name = "d3", .active_low = 1, - .default_trigger = "heartbeat", }, + { .name = "d9", .default_trigger = "disk-activity", }, + { .name = "d2", }, + { .name = "d3", .default_trigger = "heartbeat", }, +}; + +static struct gpiod_lookup_table tps_leds_gpio_table = { + .dev_id = "leds-gpio", + .table = { + /* Use local offsets on TPS65010 */ + GPIO_LOOKUP_IDX("tps65010", OSK_TPS_GPIO_LED_D9, NULL, 0, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("tps65010", OSK_TPS_GPIO_LED_D2, NULL, 1, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("tps65010", OSK_TPS_GPIO_LED_D3, NULL, 2, GPIO_ACTIVE_LOW), + { } + }, }; static struct gpio_led_platform_data tps_leds_data = { @@ -192,29 +201,34 @@ static struct platform_device osk5912_tps_leds = { .dev.platform_data = &tps_leds_data, }; -static int osk_tps_setup(struct i2c_client *client, void *context) +/* The board just hold these GPIOs hogged from setup to teardown */ +static struct gpio_desc *eth_reset; +static struct gpio_desc *vdd_dsp; + +static int osk_tps_setup(struct i2c_client *client, struct gpio_chip *gc) { + struct gpio_desc *d; if (!IS_BUILTIN(CONFIG_TPS65010)) return -ENOSYS; /* Set GPIO 1 HIGH to disable VBUS power supply; * OHCI driver powers it up/down as needed. */ - gpio_request(OSK_TPS_GPIO_USB_PWR_EN, "n_vbus_en"); - gpio_direction_output(OSK_TPS_GPIO_USB_PWR_EN, 1); + d = gpiochip_request_own_desc(gc, OSK_TPS_GPIO_USB_PWR_EN, "n_vbus_en", + GPIO_ACTIVE_HIGH, GPIOD_OUT_HIGH); /* Free the GPIO again as the driver will request it */ - gpio_free(OSK_TPS_GPIO_USB_PWR_EN); + gpiochip_free_own_desc(d); /* Set GPIO 2 high so LED D3 is off by default */ tps65010_set_gpio_out_value(GPIO2, HIGH); /* Set GPIO 3 low to take ethernet out of reset */ - gpio_request(OSK_TPS_GPIO_LAN_RESET, "smc_reset"); - gpio_direction_output(OSK_TPS_GPIO_LAN_RESET, 0); + eth_reset = gpiochip_request_own_desc(gc, OSK_TPS_GPIO_LAN_RESET, "smc_reset", + GPIO_ACTIVE_HIGH, GPIOD_OUT_LOW); /* GPIO4 is VDD_DSP */ - gpio_request(OSK_TPS_GPIO_DSP_PWR_EN, "dsp_power"); - gpio_direction_output(OSK_TPS_GPIO_DSP_PWR_EN, 1); + vdd_dsp = gpiochip_request_own_desc(gc, OSK_TPS_GPIO_DSP_PWR_EN, "dsp_power", + GPIO_ACTIVE_HIGH, GPIOD_OUT_HIGH); /* REVISIT if DSP support isn't configured, power it off ... */ /* Let LED1 (D9) blink; leds-gpio may override it */ @@ -232,15 +246,22 @@ static int osk_tps_setup(struct i2c_client *client, void *context) /* register these three LEDs */ osk5912_tps_leds.dev.parent = &client->dev; + gpiod_add_lookup_table(&tps_leds_gpio_table); platform_device_register(&osk5912_tps_leds); return 0; } +static void osk_tps_teardown(struct i2c_client *client, struct gpio_chip *gc) +{ + gpiochip_free_own_desc(eth_reset); + gpiochip_free_own_desc(vdd_dsp); +} + static struct tps65010_board tps_board = { - .base = OSK_TPS_GPIO_BASE, .outmask = 0x0f, .setup = osk_tps_setup, + .teardown = osk_tps_teardown, }; static struct i2c_board_info __initdata osk_i2c_board_info[] = { @@ -263,11 +284,6 @@ static void __init osk_init_smc91x(void) { u32 l; - if ((gpio_request(0, "smc_irq")) < 0) { - printk("Error requesting gpio 0 for smc91x irq\n"); - return; - } - /* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */ l = omap_readl(EMIFS_CCS(1)); l |= 0x3; @@ -279,10 +295,6 @@ static void __init osk_init_cf(int seg) struct resource *res = &osk5912_cf_resources[1]; omap_cfg_reg(M7_1610_GPIO62); - if ((gpio_request(62, "cf_irq")) < 0) { - printk("Error requesting gpio 62 for CF irq\n"); - return; - } switch (seg) { /* NOTE: CS0 could be configured too ... */ @@ -308,18 +320,17 @@ static void __init osk_init_cf(int seg) seg, omap_readl(EMIFS_CCS(seg)), omap_readl(EMIFS_ACS(seg))); omap_writel(0x0004a1b3, EMIFS_CCS(seg)); /* synch mode 4 etc */ omap_writel(0x00000000, EMIFS_ACS(seg)); /* OE hold/setup */ - - /* the CF I/O IRQ is really active-low */ - irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING); } static struct gpiod_lookup_table osk_usb_gpio_table = { .dev_id = "ohci", .table = { /* Power GPIO on the I2C-attached TPS65010 */ - GPIO_LOOKUP("tps65010", 0, "power", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("tps65010", OSK_TPS_GPIO_USB_PWR_EN, "power", + GPIO_ACTIVE_HIGH), GPIO_LOOKUP(OMAP_GPIO_LABEL, 9, "overcurrent", GPIO_ACTIVE_HIGH), + { } }, }; @@ -341,8 +352,32 @@ static struct omap_usb_config osk_usb_config __initdata = { #define EMIFS_CS3_VAL (0x88013141) +static struct gpiod_lookup_table osk_irq_gpio_table = { + .dev_id = NULL, + .table = { + /* GPIO used for SMC91x IRQ */ + GPIO_LOOKUP(OMAP_GPIO_LABEL, 0, "smc_irq", + GPIO_ACTIVE_HIGH), + /* GPIO used for CF IRQ */ + GPIO_LOOKUP("gpio-48-63", 14, "cf_irq", + GPIO_ACTIVE_HIGH), + /* GPIO used by the TPS65010 chip */ + GPIO_LOOKUP("mpuio", 1, "tps65010", + GPIO_ACTIVE_HIGH), + /* GPIOs used for serial wakeup IRQs */ + GPIO_LOOKUP_IDX("gpio-32-47", 5, "wakeup", 0, + GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("gpio-16-31", 2, "wakeup", 1, + GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("gpio-48-63", 1, "wakeup", 2, + GPIO_ACTIVE_HIGH), + { } + }, +}; + static void __init osk_init(void) { + struct gpio_desc *d; u32 l; osk_init_smc91x(); @@ -359,10 +394,31 @@ static void __init osk_init(void) osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys(); osk_flash_resource.end += SZ_32M - 1; - osk5912_smc91x_resources[1].start = gpio_to_irq(0); - osk5912_smc91x_resources[1].end = gpio_to_irq(0); - osk5912_cf_resources[0].start = gpio_to_irq(62); - osk5912_cf_resources[0].end = gpio_to_irq(62); + + /* + * Add the GPIOs to be used as IRQs and immediately look them up + * to be passed as an IRQ resource. This is ugly but should work + * until the day we convert to device tree. + */ + gpiod_add_lookup_table(&osk_irq_gpio_table); + + d = gpiod_get(NULL, "smc_irq", GPIOD_IN); + if (IS_ERR(d)) { + pr_err("Unable to get SMC IRQ GPIO descriptor\n"); + } else { + irq_set_irq_type(gpiod_to_irq(d), IRQ_TYPE_EDGE_RISING); + osk5912_smc91x_resources[1] = DEFINE_RES_IRQ(gpiod_to_irq(d)); + } + + d = gpiod_get(NULL, "cf_irq", GPIOD_IN); + if (IS_ERR(d)) { + pr_err("Unable to get CF IRQ GPIO descriptor\n"); + } else { + /* the CF I/O IRQ is really active-low */ + irq_set_irq_type(gpiod_to_irq(d), IRQ_TYPE_EDGE_FALLING); + osk5912_cf_resources[0] = DEFINE_RES_IRQ(gpiod_to_irq(d)); + } + platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices)); l = omap_readl(USB_TRANSCEIVER_CTRL); @@ -372,13 +428,15 @@ static void __init osk_init(void) gpiod_add_lookup_table(&osk_usb_gpio_table); omap1_usb_init(&osk_usb_config); + omap_serial_init(); + /* irq for tps65010 chip */ /* bootloader effectively does: omap_cfg_reg(U19_1610_MPUIO1); */ - if (gpio_request(OMAP_MPUIO(1), "tps65010") == 0) - gpio_direction_input(OMAP_MPUIO(1)); - - omap_serial_init(); - osk_i2c_board_info[0].irq = gpio_to_irq(OMAP_MPUIO(1)); + d = gpiod_get(NULL, "tps65010", GPIOD_IN); + if (IS_ERR(d)) + pr_err("Unable to get TPS65010 IRQ GPIO descriptor\n"); + else + osk_i2c_board_info[0].irq = gpiod_to_irq(d); omap_register_i2c_bus(1, 400, osk_i2c_board_info, ARRAY_SIZE(osk_i2c_board_info)); } @@ -389,7 +447,6 @@ MACHINE_START(OMAP_OSK, "TI-OSK") .map_io = omap1_map_io, .init_early = omap1_init_early, .init_irq = omap1_init_irq, - .handle_irq = omap1_handle_irq, .init_machine = osk_init, .init_late = omap1_init_late, .init_time = omap1_timer_init, diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index f79c497f04d5..7e061d671fde 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -13,7 +13,8 @@ * * Copyright (c) 2006 Andrzej Zaborowski <balrog@zabor.org> */ -#include <linux/gpio.h> +#include <linux/gpio/machine.h> +#include <linux/gpio/consumer.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/input.h> @@ -187,23 +188,6 @@ static struct spi_board_info palmte_spi_info[] __initdata = { }, }; -static void __init palmte_misc_gpio_setup(void) -{ - /* Set TSC2102 PINTDAV pin as input (used by TSC2102 driver) */ - if (gpio_request(PALMTE_PINTDAV_GPIO, "TSC2102 PINTDAV") < 0) { - printk(KERN_ERR "Could not reserve PINTDAV GPIO!\n"); - return; - } - gpio_direction_input(PALMTE_PINTDAV_GPIO); - - /* Set USB-or-DC-IN pin as input (unused) */ - if (gpio_request(PALMTE_USB_OR_DC_GPIO, "USB/DC-IN") < 0) { - printk(KERN_ERR "Could not reserve cable signal GPIO!\n"); - return; - } - gpio_direction_input(PALMTE_USB_OR_DC_GPIO); -} - #if IS_ENABLED(CONFIG_MMC_OMAP) static struct omap_mmc_platform_data _palmte_mmc_config = { @@ -231,8 +215,23 @@ static void palmte_mmc_init(void) #endif /* CONFIG_MMC_OMAP */ +static struct gpiod_lookup_table palmte_irq_gpio_table = { + .dev_id = NULL, + .table = { + /* GPIO used for TSC2102 PINTDAV IRQ */ + GPIO_LOOKUP("gpio-0-15", PALMTE_PINTDAV_GPIO, "tsc2102_irq", + GPIO_ACTIVE_HIGH), + /* GPIO used for USB or DC input detection */ + GPIO_LOOKUP("gpio-0-15", PALMTE_USB_OR_DC_GPIO, "usb_dc_irq", + GPIO_ACTIVE_HIGH), + { } + }, +}; + static void __init omap_palmte_init(void) { + struct gpio_desc *d; + /* mux pins for uarts */ omap_cfg_reg(UART1_TX); omap_cfg_reg(UART1_RTS); @@ -243,9 +242,21 @@ static void __init omap_palmte_init(void) platform_add_devices(palmte_devices, ARRAY_SIZE(palmte_devices)); - palmte_spi_info[0].irq = gpio_to_irq(PALMTE_PINTDAV_GPIO); + gpiod_add_lookup_table(&palmte_irq_gpio_table); + d = gpiod_get(NULL, "tsc2102_irq", GPIOD_IN); + if (IS_ERR(d)) + pr_err("Unable to get TSC2102 IRQ GPIO descriptor\n"); + else + palmte_spi_info[0].irq = gpiod_to_irq(d); spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info)); - palmte_misc_gpio_setup(); + + /* We are getting this just to set it up as input */ + d = gpiod_get(NULL, "usb_dc_irq", GPIOD_IN); + if (IS_ERR(d)) + pr_err("Unable to get USB/DC IRQ GPIO descriptor\n"); + else + gpiod_put(d); + omap_serial_init(); omap1_usb_init(&palmte_usb_config); omap_register_i2c_bus(1, 100, NULL, 0); @@ -259,7 +270,6 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") .map_io = omap1_map_io, .init_early = omap1_init_early, .init_irq = omap1_init_irq, - .handle_irq = omap1_handle_irq, .init_machine = omap_palmte_init, .init_late = omap1_init_late, .init_time = omap1_timer_init, diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c index f1c160924dfe..f183a8448a7b 100644 --- a/arch/arm/mach-omap1/board-sx1-mmc.c +++ b/arch/arm/mach-omap1/board-sx1-mmc.c @@ -9,7 +9,6 @@ * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT */ -#include <linux/gpio.h> #include <linux/platform_device.h> #include "hardware.h" diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 0c0cdd5e77c7..b869c7ba1a1b 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -11,7 +11,8 @@ * Maintainters : Vladimir Ananiev (aka Vovan888), Sergge * oslik.ru */ -#include <linux/gpio.h> +#include <linux/gpio/machine.h> +#include <linux/gpio/consumer.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/input.h> @@ -304,8 +305,23 @@ static struct platform_device *sx1_devices[] __initdata = { /*-----------------------------------------*/ +static struct gpiod_lookup_table sx1_gpio_table = { + .dev_id = NULL, + .table = { + GPIO_LOOKUP("gpio-0-15", 1, "irda_off", + GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-0-15", 11, "switch", + GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-0-15", 15, "usb_on", + GPIO_ACTIVE_HIGH), + { } + }, +}; + static void __init omap_sx1_init(void) { + struct gpio_desc *d; + /* mux pins for uarts */ omap_cfg_reg(UART1_TX); omap_cfg_reg(UART1_RTS); @@ -320,15 +336,25 @@ static void __init omap_sx1_init(void) omap_register_i2c_bus(1, 100, NULL, 0); omap1_usb_init(&sx1_usb_config); sx1_mmc_init(); + gpiod_add_lookup_table(&sx1_gpio_table); /* turn on USB power */ /* sx1_setusbpower(1); can't do it here because i2c is not ready */ - gpio_request(1, "A_IRDA_OFF"); - gpio_request(11, "A_SWITCH"); - gpio_request(15, "A_USB_ON"); - gpio_direction_output(1, 1); /*A_IRDA_OFF = 1 */ - gpio_direction_output(11, 0); /*A_SWITCH = 0 */ - gpio_direction_output(15, 0); /*A_USB_ON = 0 */ + d = gpiod_get(NULL, "irda_off", GPIOD_OUT_HIGH); + if (IS_ERR(d)) + pr_err("Unable to get IRDA OFF GPIO descriptor\n"); + else + gpiod_put(d); + d = gpiod_get(NULL, "switch", GPIOD_OUT_LOW); + if (IS_ERR(d)) + pr_err("Unable to get SWITCH GPIO descriptor\n"); + else + gpiod_put(d); + d = gpiod_get(NULL, "usb_on", GPIOD_OUT_LOW); + if (IS_ERR(d)) + pr_err("Unable to get USB ON GPIO descriptor\n"); + else + gpiod_put(d); omapfb_set_lcd_config(&sx1_lcd_config); } @@ -338,7 +364,6 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1") .map_io = omap1_map_io, .init_early = omap1_init_early, .init_irq = omap1_init_irq, - .handle_irq = omap1_handle_irq, .init_machine = omap_sx1_init, .init_late = omap1_init_late, .init_time = omap1_timer_init, diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 5304699c7a97..8b2c5f911e97 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -6,7 +6,6 @@ */ #include <linux/dma-mapping.h> -#include <linux/gpio.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c index 61fa26efd865..6724af4925f2 100644 --- a/arch/arm/mach-omap1/gpio15xx.c +++ b/arch/arm/mach-omap1/gpio15xx.c @@ -8,7 +8,6 @@ * Charulatha V <charu@ti.com> */ -#include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> #include <linux/soc/ti/omap1-soc.h> #include <asm/irq.h> diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c index cf052714b3f8..55acec22fef4 100644 --- a/arch/arm/mach-omap1/gpio16xx.c +++ b/arch/arm/mach-omap1/gpio16xx.c @@ -8,7 +8,6 @@ * Charulatha V <charu@ti.com> */ -#include <linux/gpio.h> #include <linux/platform_data/gpio-omap.h> #include <linux/soc/ti/omap1-io.h> diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index bfc7ab010ae2..9b587ecebb1c 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -35,8 +35,8 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/gpio.h> #include <linux/init.h> +#include <linux/irq.h> #include <linux/module.h> #include <linux/sched.h> #include <linux/interrupt.h> @@ -254,4 +254,6 @@ void __init omap1_init_irq(void) ct = irq_data_get_chip_type(d); ct->chip.irq_unmask(d); } + + set_handle_irq(omap1_handle_irq); } diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index c7f590645774..3adceb97138f 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -4,7 +4,8 @@ * * OMAP1 serial support. */ -#include <linux/gpio.h> +#include <linux/gpio/machine.h> +#include <linux/gpio/consumer.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> @@ -196,39 +197,38 @@ void omap_serial_wake_trigger(int enable) } } -static void __init omap_serial_set_port_wakeup(int gpio_nr) +static void __init omap_serial_set_port_wakeup(int idx) { + struct gpio_desc *d; int ret; - ret = gpio_request(gpio_nr, "UART wake"); - if (ret < 0) { - printk(KERN_ERR "Could not request UART wake GPIO: %i\n", - gpio_nr); + d = gpiod_get_index(NULL, "wakeup", idx, GPIOD_IN); + if (IS_ERR(d)) { + pr_err("Unable to get UART wakeup GPIO descriptor\n"); return; } - gpio_direction_input(gpio_nr); - ret = request_irq(gpio_to_irq(gpio_nr), &omap_serial_wake_interrupt, + ret = request_irq(gpiod_to_irq(d), &omap_serial_wake_interrupt, IRQF_TRIGGER_RISING, "serial wakeup", NULL); if (ret) { - gpio_free(gpio_nr); - printk(KERN_ERR "No interrupt for UART wake GPIO: %i\n", - gpio_nr); + gpiod_put(d); + pr_err("No interrupt for UART%d wake GPIO\n", idx + 1); return; } - enable_irq_wake(gpio_to_irq(gpio_nr)); + enable_irq_wake(gpiod_to_irq(d)); } + int __init omap_serial_wakeup_init(void) { if (!cpu_is_omap16xx()) return 0; if (uart1_ck != NULL) - omap_serial_set_port_wakeup(37); + omap_serial_set_port_wakeup(0); if (uart2_ck != NULL) - omap_serial_set_port_wakeup(18); + omap_serial_set_port_wakeup(1); if (uart3_ck != NULL) - omap_serial_set_port_wakeup(49); + omap_serial_set_port_wakeup(2); return 0; } diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 3353b0a923d9..564bf80a2621 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -10,7 +10,8 @@ #include <linux/clk.h> #include <linux/delay.h> -#include <linux/gpio.h> +#include <linux/gpio/machine.h> +#include <linux/gpio/consumer.h> #include <linux/init.h> #include <linux/io.h> #include <linux/irq.h> @@ -28,13 +29,12 @@ #include "common.h" #include "mmc.h" +#include "usb-tusb6010.h" #include "soc.h" #include "common-board-devices.h" #define TUSB6010_ASYNC_CS 1 #define TUSB6010_SYNC_CS 4 -#define TUSB6010_GPIO_INT 58 -#define TUSB6010_GPIO_ENABLE 0 #define TUSB6010_DMACHAN 0x3f #define NOKIA_N810_WIMAX (1 << 2) @@ -61,37 +61,6 @@ static void board_check_revision(void) } #if IS_ENABLED(CONFIG_USB_MUSB_TUSB6010) -/* - * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and - * 1.5 V voltage regulators of PM companion chip. Companion chip will then - * provide then PGOOD signal to TUSB6010 which will release it from reset. - */ -static int tusb_set_power(int state) -{ - int i, retval = 0; - - if (state) { - gpio_set_value(TUSB6010_GPIO_ENABLE, 1); - msleep(1); - - /* Wait until TUSB6010 pulls INT pin down */ - i = 100; - while (i && gpio_get_value(TUSB6010_GPIO_INT)) { - msleep(1); - i--; - } - - if (!i) { - printk(KERN_ERR "tusb: powerup failed\n"); - retval = -ENODEV; - } - } else { - gpio_set_value(TUSB6010_GPIO_ENABLE, 0); - msleep(10); - } - - return retval; -} static struct musb_hdrc_config musb_config = { .multipoint = 1, @@ -102,39 +71,36 @@ static struct musb_hdrc_config musb_config = { static struct musb_hdrc_platform_data tusb_data = { .mode = MUSB_OTG, - .set_power = tusb_set_power, .min_power = 25, /* x2 = 50 mA drawn from VBUS as peripheral */ .power = 100, /* Max 100 mA VBUS for host mode */ .config = &musb_config, }; +static struct gpiod_lookup_table tusb_gpio_table = { + .dev_id = "musb-tusb", + .table = { + GPIO_LOOKUP("gpio-0-15", 0, "enable", + GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-48-63", 10, "int", + GPIO_ACTIVE_HIGH), + { } + }, +}; + static void __init n8x0_usb_init(void) { int ret = 0; - static const char announce[] __initconst = KERN_INFO "TUSB 6010\n"; - - /* PM companion chip power control pin */ - ret = gpio_request_one(TUSB6010_GPIO_ENABLE, GPIOF_OUT_INIT_LOW, - "TUSB6010 enable"); - if (ret != 0) { - printk(KERN_ERR "Could not get TUSB power GPIO%i\n", - TUSB6010_GPIO_ENABLE); - return; - } - tusb_set_power(0); + gpiod_add_lookup_table(&tusb_gpio_table); ret = tusb6010_setup_interface(&tusb_data, TUSB6010_REFCLK_19, 2, - TUSB6010_ASYNC_CS, TUSB6010_SYNC_CS, - TUSB6010_GPIO_INT, TUSB6010_DMACHAN); + TUSB6010_ASYNC_CS, TUSB6010_SYNC_CS, + TUSB6010_DMACHAN); if (ret != 0) - goto err; + return; - printk(announce); + pr_info("TUSB 6010\n"); return; - -err: - gpio_free(TUSB6010_GPIO_ENABLE); } #else @@ -170,22 +136,32 @@ static struct spi_board_info n800_spi_board_info[] __initdata = { * GPIO23 and GPIO9 slot 2 EMMC on N810 * */ -#define N8X0_SLOT_SWITCH_GPIO 96 -#define N810_EMMC_VSD_GPIO 23 -#define N810_EMMC_VIO_GPIO 9 - static int slot1_cover_open; static int slot2_cover_open; static struct device *mmc_device; -static int n8x0_mmc_switch_slot(struct device *dev, int slot) -{ -#ifdef CONFIG_MMC_DEBUG - dev_dbg(dev, "Choose slot %d\n", slot + 1); -#endif - gpio_set_value(N8X0_SLOT_SWITCH_GPIO, slot); - return 0; -} +static struct gpiod_lookup_table nokia8xx_mmc_gpio_table = { + .dev_id = "mmci-omap.0", + .table = { + /* Slot switch, GPIO 96 */ + GPIO_LOOKUP("gpio-80-111", 16, + "switch", GPIO_ACTIVE_HIGH), + { } + }, +}; + +static struct gpiod_lookup_table nokia810_mmc_gpio_table = { + .dev_id = "mmci-omap.0", + .table = { + /* Slot index 1, VSD power, GPIO 23 */ + GPIO_LOOKUP_IDX("gpio-16-31", 7, + "vsd", 1, GPIO_ACTIVE_HIGH), + /* Slot index 1, VIO power, GPIO 9 */ + GPIO_LOOKUP_IDX("gpio-0-15", 9, + "vsd", 1, GPIO_ACTIVE_HIGH), + { } + }, +}; static int n8x0_mmc_set_power_menelaus(struct device *dev, int slot, int power_on, int vdd) @@ -256,31 +232,13 @@ static int n8x0_mmc_set_power_menelaus(struct device *dev, int slot, return 0; } -static void n810_set_power_emmc(struct device *dev, - int power_on) -{ - dev_dbg(dev, "Set EMMC power %s\n", power_on ? "on" : "off"); - - if (power_on) { - gpio_set_value(N810_EMMC_VSD_GPIO, 1); - msleep(1); - gpio_set_value(N810_EMMC_VIO_GPIO, 1); - msleep(1); - } else { - gpio_set_value(N810_EMMC_VIO_GPIO, 0); - msleep(50); - gpio_set_value(N810_EMMC_VSD_GPIO, 0); - msleep(50); - } -} - static int n8x0_mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { if (board_is_n800() || slot == 0) return n8x0_mmc_set_power_menelaus(dev, slot, power_on, vdd); - n810_set_power_emmc(dev, power_on); + /* The n810 power will be handled by GPIO code in the driver */ return 0; } @@ -418,13 +376,6 @@ static void n8x0_mmc_shutdown(struct device *dev) static void n8x0_mmc_cleanup(struct device *dev) { menelaus_unregister_mmc_callback(); - - gpio_free(N8X0_SLOT_SWITCH_GPIO); - - if (board_is_n810()) { - gpio_free(N810_EMMC_VSD_GPIO); - gpio_free(N810_EMMC_VIO_GPIO); - } } /* @@ -433,7 +384,6 @@ static void n8x0_mmc_cleanup(struct device *dev) */ static struct omap_mmc_platform_data mmc1_data = { .nr_slots = 0, - .switch_slot = n8x0_mmc_switch_slot, .init = n8x0_mmc_late_init, .cleanup = n8x0_mmc_cleanup, .shutdown = n8x0_mmc_shutdown, @@ -463,14 +413,9 @@ static struct omap_mmc_platform_data mmc1_data = { static struct omap_mmc_platform_data *mmc_data[OMAP24XX_NR_MMC]; -static struct gpio n810_emmc_gpios[] __initdata = { - { N810_EMMC_VSD_GPIO, GPIOF_OUT_INIT_LOW, "MMC slot 2 Vddf" }, - { N810_EMMC_VIO_GPIO, GPIOF_OUT_INIT_LOW, "MMC slot 2 Vdd" }, -}; - static void __init n8x0_mmc_init(void) { - int err; + gpiod_add_lookup_table(&nokia8xx_mmc_gpio_table); if (board_is_n810()) { mmc1_data.slots[0].name = "external"; @@ -483,20 +428,7 @@ static void __init n8x0_mmc_init(void) */ mmc1_data.slots[1].name = "internal"; mmc1_data.slots[1].ban_openended = 1; - } - - err = gpio_request_one(N8X0_SLOT_SWITCH_GPIO, GPIOF_OUT_INIT_LOW, - "MMC slot switch"); - if (err) - return; - - if (board_is_n810()) { - err = gpio_request_array(n810_emmc_gpios, - ARRAY_SIZE(n810_emmc_gpios)); - if (err) { - gpio_free(N8X0_SLOT_SWITCH_GPIO); - return; - } + gpiod_add_lookup_table(&nokia810_mmc_gpio_table); } mmc1_data.nr_slots = 2; diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 4afa2f08e668..fca7869c8075 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -244,7 +244,6 @@ static int _omap_device_notifier_call(struct notifier_block *nb, case BUS_NOTIFY_ADD_DEVICE: if (pdev->dev.of_node) omap_device_build_from_dt(pdev); - omap_auxdata_legacy_init(dev); fallthrough; default: od = to_omap_device(pdev); diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 04208cc52784..c1c0121f478d 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -6,8 +6,8 @@ */ #include <linux/clk.h> #include <linux/davinci_emac.h> +#include <linux/gpio/machine.h> #include <linux/gpio/consumer.h> -#include <linux/gpio.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/of_platform.h> @@ -41,7 +41,6 @@ struct pdata_init { }; static struct of_dev_auxdata omap_auxdata_lookup[]; -static struct twl4030_gpio_platform_data twl_gpio_auxdata; #ifdef CONFIG_MACH_NOKIA_N8X0 static void __init omap2420_n8x0_legacy_init(void) @@ -98,52 +97,43 @@ static struct iommu_platform_data omap3_iommu_isp_pdata = { }; #endif -static int omap3_sbc_t3730_twl_callback(struct device *dev, - unsigned gpio, - unsigned ngpio) +static void __init omap3_sbc_t3x_usb_hub_init(char *hub_name, int idx) { - int res; + struct gpio_desc *d; - res = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH, - "wlan pwr"); - if (res) - return res; - - gpiod_export(gpio_to_desc(gpio), 0); - - return 0; -} - -static void __init omap3_sbc_t3x_usb_hub_init(int gpio, char *hub_name) -{ - int err = gpio_request_one(gpio, GPIOF_OUT_INIT_LOW, hub_name); - - if (err) { - pr_err("SBC-T3x: %s reset gpio request failed: %d\n", - hub_name, err); + /* This asserts the RESET line (reverse polarity) */ + d = gpiod_get_index(NULL, "reset", idx, GPIOD_OUT_HIGH); + if (IS_ERR(d)) { + pr_err("Unable to get T3x USB reset GPIO descriptor\n"); return; } - - gpiod_export(gpio_to_desc(gpio), 0); - + gpiod_set_consumer_name(d, hub_name); + gpiod_export(d, 0); udelay(10); - gpio_set_value(gpio, 1); + /* De-assert RESET */ + gpiod_set_value(d, 0); msleep(1); } -static void __init omap3_sbc_t3730_twl_init(void) -{ - twl_gpio_auxdata.setup = omap3_sbc_t3730_twl_callback; -} +static struct gpiod_lookup_table omap3_sbc_t3x_usb_gpio_table = { + .dev_id = NULL, + .table = { + GPIO_LOOKUP_IDX("gpio-160-175", 7, "reset", 0, + GPIO_ACTIVE_LOW), + { } + }, +}; static void __init omap3_sbc_t3730_legacy_init(void) { - omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub"); + gpiod_add_lookup_table(&omap3_sbc_t3x_usb_gpio_table); + omap3_sbc_t3x_usb_hub_init("sb-t35 usb hub", 0); } static void __init omap3_sbc_t3530_legacy_init(void) { - omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub"); + gpiod_add_lookup_table(&omap3_sbc_t3x_usb_gpio_table); + omap3_sbc_t3x_usb_hub_init("sb-t35 usb hub", 0); } static void __init omap3_evm_legacy_init(void) @@ -187,31 +177,59 @@ static void __init am35xx_emac_reset(void) omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */ } -static struct gpio cm_t3517_wlan_gpios[] __initdata = { - { 56, GPIOF_OUT_INIT_HIGH, "wlan pwr" }, - { 4, GPIOF_OUT_INIT_HIGH, "xcvr noe" }, +static struct gpiod_lookup_table cm_t3517_wlan_gpio_table = { + .dev_id = NULL, + .table = { + GPIO_LOOKUP("gpio-48-53", 8, "power", + GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-0-15", 4, "noe", + GPIO_ACTIVE_HIGH), + { } + }, }; static void __init omap3_sbc_t3517_wifi_init(void) { - int err = gpio_request_array(cm_t3517_wlan_gpios, - ARRAY_SIZE(cm_t3517_wlan_gpios)); - if (err) { - pr_err("SBC-T3517: wl12xx gpios request failed: %d\n", err); - return; - } + struct gpio_desc *d; + + gpiod_add_lookup_table(&cm_t3517_wlan_gpio_table); - gpiod_export(gpio_to_desc(cm_t3517_wlan_gpios[0].gpio), 0); - gpiod_export(gpio_to_desc(cm_t3517_wlan_gpios[1].gpio), 0); + /* This asserts the RESET line (reverse polarity) */ + d = gpiod_get(NULL, "power", GPIOD_OUT_HIGH); + if (IS_ERR(d)) { + pr_err("Unable to get CM T3517 WLAN power GPIO descriptor\n"); + } else { + gpiod_set_consumer_name(d, "wlan pwr"); + gpiod_export(d, 0); + } + d = gpiod_get(NULL, "noe", GPIOD_OUT_HIGH); + if (IS_ERR(d)) { + pr_err("Unable to get CM T3517 WLAN XCVR NOE GPIO descriptor\n"); + } else { + gpiod_set_consumer_name(d, "xcvr noe"); + gpiod_export(d, 0); + } msleep(100); - gpio_set_value(cm_t3517_wlan_gpios[1].gpio, 0); -} + gpiod_set_value(d, 0); +} + +static struct gpiod_lookup_table omap3_sbc_t3517_usb_gpio_table = { + .dev_id = NULL, + .table = { + GPIO_LOOKUP_IDX("gpio-144-159", 8, "reset", 0, + GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("gpio-96-111", 2, "reset", 1, + GPIO_ACTIVE_LOW), + { } + }, +}; static void __init omap3_sbc_t3517_legacy_init(void) { - omap3_sbc_t3x_usb_hub_init(152, "cm-t3517 usb hub"); - omap3_sbc_t3x_usb_hub_init(98, "sb-t35 usb hub"); + gpiod_add_lookup_table(&omap3_sbc_t3517_usb_gpio_table); + omap3_sbc_t3x_usb_hub_init("cm-t3517 usb hub", 0); + omap3_sbc_t3x_usb_hub_init("sb-t35 usb hub", 1); am35xx_emac_reset(); hsmmc2_internal_input_clk(); omap3_sbc_t3517_wifi_init(); @@ -393,21 +411,6 @@ static struct ti_prm_platform_data ti_prm_pdata = { .clkdm_lookup = clkdm_lookup, }; -/* - * GPIOs for TWL are initialized by the I2C bus and need custom - * handing until DSS has device tree bindings. - */ -void omap_auxdata_legacy_init(struct device *dev) -{ - if (dev->platform_data) - return; - - if (strcmp("twl4030-gpio", dev_name(dev))) - return; - - dev->platform_data = &twl_gpio_auxdata; -} - #if defined(CONFIG_ARCH_OMAP3) && IS_ENABLED(CONFIG_SND_SOC_OMAP_MCBSP) static struct omap_mcbsp_platform_data mcbsp_pdata; static void __init omap3_mcbsp_init(void) @@ -428,9 +431,6 @@ static struct pdata_init auxdata_quirks[] __initdata = { { "nokia,n810", omap2420_n8x0_legacy_init, }, { "nokia,n810-wimax", omap2420_n8x0_legacy_init, }, #endif -#ifdef CONFIG_ARCH_OMAP3 - { "compulab,omap3-sbc-t3730", omap3_sbc_t3730_twl_init, }, -#endif { /* sentinel */ }, }; diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 18fa52f828dc..b46c254c2bc4 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -11,12 +11,12 @@ #include <linux/errno.h> #include <linux/delay.h> #include <linux/platform_device.h> -#include <linux/gpio.h> #include <linux/export.h> #include <linux/platform_data/usb-omap.h> #include <linux/usb/musb.h> +#include "usb-tusb6010.h" #include "gpmc.h" static u8 async_cs, sync_cs; @@ -132,10 +132,6 @@ static struct resource tusb_resources[] = { { /* Synchronous access */ .flags = IORESOURCE_MEM, }, - { /* IRQ */ - .name = "mc", - .flags = IORESOURCE_IRQ, - }, }; static u64 tusb_dmamask = ~(u32)0; @@ -154,9 +150,9 @@ static struct platform_device tusb_device = { /* this may be called only from board-*.c setup code */ int __init tusb6010_setup_interface(struct musb_hdrc_platform_data *data, - unsigned ps_refclk, unsigned waitpin, - unsigned async, unsigned sync, - unsigned irq, unsigned dmachan) + unsigned int ps_refclk, unsigned int waitpin, + unsigned int async, unsigned int sync, + unsigned int dmachan) { int status; static char error[] __initdata = @@ -192,14 +188,6 @@ int __init tusb6010_setup_interface(struct musb_hdrc_platform_data *data, if (status < 0) return status; - /* IRQ */ - status = gpio_request_one(irq, GPIOF_IN, "TUSB6010 irq"); - if (status < 0) { - printk(error, 3, status); - return status; - } - tusb_resources[2].start = gpio_to_irq(irq); - /* set up memory timings ... can speed them up later */ if (!ps_refclk) { printk(error, 4, status); diff --git a/arch/arm/mach-omap2/usb-tusb6010.h b/arch/arm/mach-omap2/usb-tusb6010.h new file mode 100644 index 000000000000..d210ff6238c2 --- /dev/null +++ b/arch/arm/mach-omap2/usb-tusb6010.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef __USB_TUSB6010_H +#define __USB_TUSB6010_H + +extern int __init tusb6010_setup_interface( + struct musb_hdrc_platform_data *data, + unsigned int ps_refclk, unsigned int waitpin, + unsigned int async_cs, unsigned int sync_cs, + unsigned int dmachan); + +#endif /* __USB_TUSB6010_H */ diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index 72b08a9bf0fd..6b7197ae3c72 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -233,7 +233,6 @@ MACHINE_START(GUMSTIX, "Gumstix") .map_io = pxa25x_map_io, .nr_irqs = PXA_NR_IRQS, .init_irq = pxa25x_init_irq, - .handle_irq = pxa25x_handle_irq, .init_time = pxa_timer_init, .init_machine = gumstix_init, .restart = pxa_restart, diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 1b83be181bab..032dc897fe94 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -143,6 +143,7 @@ set_pwer: void __init pxa25x_init_irq(void) { pxa_init_irq(32, pxa25x_set_wake); + set_handle_irq(pxa25x_handle_irq); } static int __init __init diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 4135ba2877c4..c9b56424b653 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -228,6 +228,7 @@ static int pxa27x_set_wake(struct irq_data *d, unsigned int on) void __init pxa27x_init_irq(void) { pxa_init_irq(34, pxa27x_set_wake); + set_handle_irq(pxa27x_handle_irq); } static int __init diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 4325bdc2b9ff..d01ea54b0b78 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -506,10 +506,18 @@ static struct ads7846_platform_data spitz_ads7846_info = { .x_plate_ohms = 419, .y_plate_ohms = 486, .pressure_max = 1024, - .gpio_pendown = SPITZ_GPIO_TP_INT, .wait_for_sync = spitz_ads7846_wait_for_hsync, }; +static struct gpiod_lookup_table spitz_ads7846_gpio_table = { + .dev_id = "spi2.0", + .table = { + GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_TP_INT, + "pendown", GPIO_ACTIVE_LOW), + { } + }, +}; + static void spitz_bl_kick_battery(void) { void (*kick_batt)(void); @@ -594,6 +602,7 @@ static void __init spitz_spi_init(void) else gpiod_add_lookup_table(&spitz_lcdcon_gpio_table); + gpiod_add_lookup_table(&spitz_ads7846_gpio_table); gpiod_add_lookup_table(&spitz_spi_gpio_table); pxa2xx_set_spi_info(2, &spitz_spi_info); spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices)); @@ -1043,7 +1052,6 @@ MACHINE_START(SPITZ, "SHARP Spitz") .map_io = pxa27x_map_io, .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, - .handle_irq = pxa27x_handle_irq, .init_machine = spitz_init, .init_time = pxa_timer_init, .restart = spitz_restart, @@ -1056,7 +1064,6 @@ MACHINE_START(BORZOI, "SHARP Borzoi") .map_io = pxa27x_map_io, .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, - .handle_irq = pxa27x_handle_irq, .init_machine = spitz_init, .init_time = pxa_timer_init, .restart = spitz_restart, @@ -1069,7 +1076,6 @@ MACHINE_START(AKITA, "SHARP Akita") .map_io = pxa27x_map_io, .nr_irqs = PXA_NR_IRQS, .init_irq = pxa27x_init_irq, - .handle_irq = pxa27x_handle_irq, .init_machine = spitz_init, .init_time = pxa_timer_init, .restart = spitz_restart, diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig index b2d45cf10a3c..b3842c971d31 100644 --- a/arch/arm/mach-sti/Kconfig +++ b/arch/arm/mach-sti/Kconfig @@ -21,7 +21,7 @@ menuconfig ARCH_STI help Include support for STMicroelectronics' STiH415/416, STiH407/10 and STiH418 family SoCs using the Device Tree for discovery. More - information can be found in Documentation/arm/sti/ and + information can be found in Documentation/arch/arm/sti/ and Documentation/devicetree. if ARCH_STI diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index be183ed1232d..c164cde50243 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -712,7 +712,7 @@ config ARM_VIRT_EXT assistance. A compliant bootloader is required in order to make maximum - use of this feature. Refer to Documentation/arm/booting.rst for + use of this feature. Refer to Documentation/arch/arm/booting.rst for details. config SWP_EMULATE @@ -904,7 +904,7 @@ config KUSER_HELPERS the CPU type fitted to the system. This permits binaries to be run on ARMv4 through to ARMv7 without modification. - See Documentation/arm/kernel_user_helpers.rst for details. + See Documentation/arch/arm/kernel_user_helpers.rst for details. However, the fixed address nature of these helpers can be used by ROP (return orientated programming) authors when creating diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index b4a33358d2e9..bc4ed5ce3e00 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -258,12 +258,14 @@ static struct dma_contig_early_reserve dma_mmu_remap[MAX_CMA_AREAS] __initdata; static int dma_mmu_remap_num __initdata; +#ifdef CONFIG_DMA_CMA void __init dma_contiguous_early_fixup(phys_addr_t base, unsigned long size) { dma_mmu_remap[dma_mmu_remap_num].base = base; dma_mmu_remap[dma_mmu_remap_num].size = size; dma_mmu_remap_num++; } +#endif void __init dma_contiguous_remap(void) { diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c index 0e49154454a6..ca5302b0b7ee 100644 --- a/arch/arm/mm/fault-armv.c +++ b/arch/arm/mm/fault-armv.c @@ -117,8 +117,11 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address, * must use the nested version. This also means we need to * open-code the spin-locking. */ - ptl = pte_lockptr(vma->vm_mm, pmd); pte = pte_offset_map(pmd, address); + if (!pte) + return 0; + + ptl = pte_lockptr(vma->vm_mm, pmd); do_pte_lock(ptl); ret = do_adjust_pte(vma, address, pfn, pte); diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 2418f1efabd8..fef62e4a9edd 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -85,6 +85,9 @@ void show_pte(const char *lvl, struct mm_struct *mm, unsigned long addr) break; pte = pte_offset_map(pmd, addr); + if (!pte) + break; + pr_cont(", *pte=%08llx", (long long)pte_val(*pte)); #ifndef CONFIG_ARM_LPAE pr_cont(", *ppte=%08llx", @@ -232,37 +235,11 @@ static inline bool is_permission_fault(unsigned int fsr) return false; } -static vm_fault_t __kprobes -__do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int flags, - unsigned long vma_flags, struct pt_regs *regs) -{ - struct vm_area_struct *vma = find_vma(mm, addr); - if (unlikely(!vma)) - return VM_FAULT_BADMAP; - - if (unlikely(vma->vm_start > addr)) { - if (!(vma->vm_flags & VM_GROWSDOWN)) - return VM_FAULT_BADMAP; - if (addr < FIRST_USER_ADDRESS) - return VM_FAULT_BADMAP; - if (expand_stack(vma, addr)) - return VM_FAULT_BADMAP; - } - - /* - * ok, we have a good vm_area for this memory access, check the - * permissions on the VMA allow for the fault which occurred. - */ - if (!(vma->vm_flags & vma_flags)) - return VM_FAULT_BADACCESS; - - return handle_mm_fault(vma, addr & PAGE_MASK, flags, regs); -} - static int __kprobes do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) { struct mm_struct *mm = current->mm; + struct vm_area_struct *vma; int sig, code; vm_fault_t fault; unsigned int flags = FAULT_FLAG_DEFAULT; @@ -301,31 +278,21 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr); - /* - * As per x86, we may deadlock here. However, since the kernel only - * validly references user space from well defined areas of the code, - * we can bug out early if this is from code which shouldn't. - */ - if (!mmap_read_trylock(mm)) { - if (!user_mode(regs) && !search_exception_tables(regs->ARM_pc)) - goto no_context; retry: - mmap_read_lock(mm); - } else { - /* - * The above down_read_trylock() might have succeeded in - * which case, we'll have missed the might_sleep() from - * down_read() - */ - might_sleep(); -#ifdef CONFIG_DEBUG_VM - if (!user_mode(regs) && - !search_exception_tables(regs->ARM_pc)) - goto no_context; -#endif + vma = lock_mm_and_find_vma(mm, addr, regs); + if (unlikely(!vma)) { + fault = VM_FAULT_BADMAP; + goto bad_area; } - fault = __do_page_fault(mm, addr, flags, vm_flags, regs); + /* + * ok, we have a good vm_area for this memory access, check the + * permissions on the VMA allow for the fault which occurred. + */ + if (!(vma->vm_flags & vm_flags)) + fault = VM_FAULT_BADACCESS; + else + fault = handle_mm_fault(vma, addr & PAGE_MASK, flags, regs); /* If we need to retry but a fatal signal is pending, handle the * signal first. We do not need to release the mmap_lock because @@ -356,6 +323,7 @@ retry: if (likely(!(fault & (VM_FAULT_ERROR | VM_FAULT_BADMAP | VM_FAULT_BADACCESS)))) return 0; +bad_area: /* * If we are in kernel mode at this point, we * have no context to handle this fault with. diff --git a/arch/arm/mm/fault.h b/arch/arm/mm/fault.h index 54927ba1fa6e..e8f8c1902544 100644 --- a/arch/arm/mm/fault.h +++ b/arch/arm/mm/fault.h @@ -37,5 +37,9 @@ static inline int fsr_fs(unsigned int fsr) void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs); void early_abt_enable(void); +asmlinkage void do_DataAbort(unsigned long addr, unsigned int fsr, + struct pt_regs *regs); +asmlinkage void do_PrefetchAbort(unsigned long addr, unsigned int ifsr, + struct pt_regs *regs); #endif /* __ARCH_ARM_FAULT_H */ diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 7ff9feea13a6..2508be91b7a0 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -354,6 +354,7 @@ EXPORT_SYMBOL(flush_dcache_page); * memcpy() to/from page * if written to page, flush_dcache_page() */ +void __flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned long vmaddr); void __flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned long vmaddr) { unsigned long pfn; diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 463fc2a8448f..f3a52c08a200 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -21,6 +21,7 @@ #include <asm/sections.h> #include <asm/setup.h> #include <asm/smp_plat.h> +#include <asm/tcm.h> #include <asm/tlb.h> #include <asm/highmem.h> #include <asm/system_info.h> @@ -37,7 +38,6 @@ #include "fault.h" #include "mm.h" -#include "tcm.h" extern unsigned long __atags_pointer; diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index 53f2d8774fdb..43cfd06bbeba 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -21,6 +21,7 @@ #include <asm/cputype.h> #include <asm/mpu.h> #include <asm/procinfo.h> +#include <asm/idmap.h> #include "mm.h" diff --git a/arch/arm/mm/tcm.h b/arch/arm/mm/tcm.h deleted file mode 100644 index 6b80a760d875..000000000000 --- a/arch/arm/mm/tcm.h +++ /dev/null @@ -1,17 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2008-2009 ST-Ericsson AB - * TCM memory handling for ARM systems - * - * Author: Linus Walleij <linus.walleij@stericsson.com> - * Author: Rickard Andersson <rickard.andersson@stericsson.com> - */ - -#ifdef CONFIG_HAVE_TCM -void __init tcm_init(void); -#else -/* No TCM support, just blank inlines to be optimized out */ -static inline void tcm_init(void) -{ -} -#endif diff --git a/arch/arm/probes/kprobes/checkers-common.c b/arch/arm/probes/kprobes/checkers-common.c index 4d720990cf2a..eba7ac4725c0 100644 --- a/arch/arm/probes/kprobes/checkers-common.c +++ b/arch/arm/probes/kprobes/checkers-common.c @@ -40,7 +40,7 @@ enum probes_insn checker_stack_use_imm_0xx(probes_opcode_t insn, * Different from other insn uses imm8, the real addressing offset of * STRD in T32 encoding should be imm8 * 4. See ARMARM description. */ -enum probes_insn checker_stack_use_t32strd(probes_opcode_t insn, +static enum probes_insn checker_stack_use_t32strd(probes_opcode_t insn, struct arch_probes_insn *asi, const struct decode_header *h) { diff --git a/arch/arm/probes/kprobes/core.c b/arch/arm/probes/kprobes/core.c index 9090c3a74dcc..d8238da095df 100644 --- a/arch/arm/probes/kprobes/core.c +++ b/arch/arm/probes/kprobes/core.c @@ -233,7 +233,7 @@ singlestep(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb) * kprobe, and that level is reserved for user kprobe handlers, so we can't * risk encountering a new kprobe in an interrupt handler. */ -void __kprobes kprobe_handler(struct pt_regs *regs) +static void __kprobes kprobe_handler(struct pt_regs *regs) { struct kprobe *p, *cur; struct kprobe_ctlblk *kcb; diff --git a/arch/arm/probes/kprobes/opt-arm.c b/arch/arm/probes/kprobes/opt-arm.c index dbef34ed933f..7f65048380ca 100644 --- a/arch/arm/probes/kprobes/opt-arm.c +++ b/arch/arm/probes/kprobes/opt-arm.c @@ -145,8 +145,6 @@ __arch_remove_optimized_kprobe(struct optimized_kprobe *op, int dirty) } } -extern void kprobe_handler(struct pt_regs *regs); - static void optimized_callback(struct optimized_kprobe *op, struct pt_regs *regs) { diff --git a/arch/arm/probes/kprobes/test-core.c b/arch/arm/probes/kprobes/test-core.c index c562832b8627..171c7076b89f 100644 --- a/arch/arm/probes/kprobes/test-core.c +++ b/arch/arm/probes/kprobes/test-core.c @@ -720,7 +720,7 @@ static const char coverage_register_lookup[16] = { [REG_TYPE_NOSPPCX] = COVERAGE_ANY_REG | COVERAGE_SP, }; -unsigned coverage_start_registers(const struct decode_header *h) +static unsigned coverage_start_registers(const struct decode_header *h) { unsigned regs = 0; int i; diff --git a/arch/arm/probes/kprobes/test-core.h b/arch/arm/probes/kprobes/test-core.h index 56ad3c0aaeea..c7297037c162 100644 --- a/arch/arm/probes/kprobes/test-core.h +++ b/arch/arm/probes/kprobes/test-core.h @@ -454,3 +454,7 @@ void kprobe_thumb32_test_cases(void); #else void kprobe_arm_test_cases(void); #endif + +void __kprobes_test_case_start(void); +void __kprobes_test_case_end_16(void); +void __kprobes_test_case_end_32(void); diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 9e74c7ff6b04..97e2bfa01f4b 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -7,7 +7,7 @@ # http://www.arm.linux.org.uk/developer/machines/download.php # # Please do not send patches to this file; it is automatically generated! -# To add an entry into this database, please see Documentation/arm/arm.rst, +# To add an entry into this database, please see Documentation/arch/arm/arm.rst, # or visit: # # http://www.arm.linux.org.uk/developer/machines/?action=new diff --git a/arch/arm/tools/syscall.tbl b/arch/arm/tools/syscall.tbl index ac964612d8b0..8ebed8a13874 100644 --- a/arch/arm/tools/syscall.tbl +++ b/arch/arm/tools/syscall.tbl @@ -464,3 +464,4 @@ 448 common process_mrelease sys_process_mrelease 449 common futex_waitv sys_futex_waitv 450 common set_mempolicy_home_node sys_set_mempolicy_home_node +451 common cachestat sys_cachestat diff --git a/arch/arm/vdso/vgettimeofday.c b/arch/arm/vdso/vgettimeofday.c index 1976c6f325a4..a003beacac76 100644 --- a/arch/arm/vdso/vgettimeofday.c +++ b/arch/arm/vdso/vgettimeofday.c @@ -6,6 +6,8 @@ */ #include <linux/time.h> #include <linux/types.h> +#include <asm/vdso.h> +#include <asm/unwind.h> int __vdso_clock_gettime(clockid_t clock, struct old_timespec32 *ts) diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 349dcb944a93..1ba5078c1025 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -25,6 +25,7 @@ #include <asm/thread_notify.h> #include <asm/traps.h> #include <asm/vfp.h> +#include <asm/neon.h> #include "vfpinstr.h" #include "vfp.h" |