diff options
Diffstat (limited to 'arch/arm')
207 files changed, 3752 insertions, 1283 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index f456cf4ae3ca..8a027f9e339e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -330,6 +330,8 @@ config ARCH_AT91 select IRQ_DOMAIN select NEED_MACH_GPIO_H select NEED_MACH_IO_H if PCCARD + select PINCTRL + select PINCTRL_AT91 if USE_OF help This enables support for systems based on Atmel AT91RM9200 and AT91SAM9* processors. @@ -548,6 +550,7 @@ config ARCH_KIRKWOOD select CPU_FEROCEON select GENERIC_CLOCKEVENTS select PCI + select PCI_QUIRKS select PLAT_ORION_LEGACY help Support for the following Marvell Kirkwood series SoCs: @@ -587,6 +590,7 @@ config ARCH_MMP select GPIO_PXA select IRQ_DOMAIN select NEED_MACH_GPIO_H + select PINCTRL select PLAT_PXA select SPARSE_IRQ help @@ -905,6 +909,7 @@ config ARCH_NOMADIK config PLAT_SPEAR bool "ST SPEAr" + select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select CLKDEV_LOOKUP @@ -1604,8 +1609,8 @@ config NR_CPUS default "4" config HOTPLUG_CPU - bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" - depends on SMP && HOTPLUG && EXPERIMENTAL + bool "Support for hot-pluggable CPUs" + depends on SMP && HOTPLUG help Say Y here to experiment with turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. @@ -1646,8 +1651,8 @@ config HZ default 100 config THUMB2_KERNEL - bool "Compile the kernel in Thumb-2 mode (EXPERIMENTAL)" - depends on CPU_V7 && !CPU_V6 && !CPU_V6K && EXPERIMENTAL + bool "Compile the kernel in Thumb-2 mode" + depends on CPU_V7 && !CPU_V6 && !CPU_V6K select AEABI select ARM_ASM_UNIFIED select ARM_UNWIND @@ -1851,6 +1856,7 @@ config XEN_DOM0 config XEN bool "Xen guest support on ARM (EXPERIMENTAL)" depends on EXPERIMENTAL && ARM && OF + depends on CPU_V7 && !CPU_V6 help Say Y if you want to run Linux in a Virtual Machine on Xen on ARM. diff --git a/arch/arm/Makefile b/arch/arm/Makefile index f023e3acdfbd..c35baf102f6f 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -21,8 +21,6 @@ endif OBJCOPYFLAGS :=-O binary -R .comment -S GZFLAGS :=-9 #KBUILD_CFLAGS +=-pipe -# Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb: -KBUILD_CFLAGS +=$(call cc-option,-marm,) # Never generate .eh_frame KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm) @@ -105,17 +103,20 @@ endif ifeq ($(CONFIG_THUMB2_KERNEL),y) AFLAGS_AUTOIT :=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it) AFLAGS_NOWARN :=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W) -CFLAGS_THUMB2 :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN) -AFLAGS_THUMB2 :=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb +CFLAGS_ISA :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN) +AFLAGS_ISA :=$(CFLAGS_ISA) -Wa$(comma)-mthumb # Work around buggy relocation from gas if requested: ifeq ($(CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11),y) CFLAGS_MODULE +=-fno-optimize-sibling-calls endif +else +CFLAGS_ISA :=$(call cc-option,-marm,) +AFLAGS_ISA :=$(CFLAGS_ISA) endif # Need -Uarm for gcc < 3.x -KBUILD_CFLAGS +=$(CFLAGS_ABI) $(CFLAGS_THUMB2) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm -KBUILD_AFLAGS +=$(CFLAGS_ABI) $(AFLAGS_THUMB2) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float +KBUILD_CFLAGS +=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm +KBUILD_AFLAGS +=$(CFLAGS_ABI) $(AFLAGS_ISA) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float CHECKFLAGS += -D__arm__ @@ -291,10 +292,10 @@ zinstall uinstall install: vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ %.dtb: scripts - $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ + $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@ dtbs: scripts - $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ + $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) dtbs # We use MRPROPER_FILES and CLEAN_FILES now archclean: diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 3fdab016aa5c..abfce280f57b 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -15,8 +15,6 @@ ifneq ($(MACHINE),) include $(srctree)/$(MACHINE)/Makefile.boot endif -include $(srctree)/arch/arm/boot/dts/Makefile - # Note: the following conditions must always be true: # ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET) # PARAMS_PHYS must be within 4MB of ZRELADDR @@ -33,7 +31,7 @@ ifeq ($(CONFIG_XIP_KERNEL),y) $(obj)/xipImage: vmlinux FORCE $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))' + @$(kecho) ' Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))' $(obj)/Image $(obj)/zImage: FORCE @echo 'Kernel configured for XIP (CONFIG_XIP_KERNEL=y)' @@ -48,27 +46,17 @@ $(obj)/xipImage: FORCE $(obj)/Image: vmlinux FORCE $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready' + @$(kecho) ' Kernel: $@ is ready' $(obj)/compressed/vmlinux: $(obj)/Image FORCE $(Q)$(MAKE) $(build)=$(obj)/compressed $@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready' + @$(kecho) ' Kernel: $@ is ready' endif -targets += $(dtb-y) - -# Rule to build device tree blobs -$(obj)/%.dtb: $(src)/dts/%.dts FORCE - $(call if_changed_dep,dtc) - -$(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y)) - -clean-files := *.dtb - ifneq ($(LOADADDR),) UIMAGE_LOADADDR=$(LOADADDR) else @@ -90,7 +78,7 @@ fi $(obj)/uImage: $(obj)/zImage FORCE @$(check_for_multiple_loadaddr) $(call if_changed,uimage) - @echo ' Image $@ is ready' + @$(kecho) ' Image $@ is ready' $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE $(Q)$(MAKE) $(build)=$(obj)/bootp $@ @@ -98,7 +86,7 @@ $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE $(obj)/bootpImage: $(obj)/bootp/bootp FORCE $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready' + @$(kecho) ' Kernel: $@ is ready' PHONY += initrd FORCE initrd: diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 90275f036cd1..49ca86e37b8d 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -652,6 +652,15 @@ __setup_mmu: sub r3, r4, #16384 @ Page directory size mov pc, lr ENDPROC(__setup_mmu) +@ Enable unaligned access on v6, to allow better code generation +@ for the decompressor C code: +__armv6_mmu_cache_on: + mrc p15, 0, r0, c1, c0, 0 @ read SCTLR + bic r0, r0, #2 @ A (no unaligned access fault) + orr r0, r0, #1 << 22 @ U (v6 unaligned access model) + mcr p15, 0, r0, c1, c0, 0 @ write SCTLR + b __armv4_mmu_cache_on + __arm926ejs_mmu_cache_on: #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH mov r0, #4 @ put dcache in WT mode @@ -694,6 +703,9 @@ __armv7_mmu_cache_on: bic r0, r0, #1 << 28 @ clear SCTLR.TRE orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement orr r0, r0, #0x003c @ write buffer + bic r0, r0, #2 @ A (no unaligned access fault) + orr r0, r0, #1 << 22 @ U (v6 unaligned access model) + @ (needed for ARM1176) #ifdef CONFIG_MMU #ifdef CONFIG_CPU_ENDIAN_BE8 orr r0, r0, #1 << 25 @ big-endian page tables @@ -914,7 +926,7 @@ proc_types: .word 0x0007b000 @ ARMv6 .word 0x000ff000 - W(b) __armv4_mmu_cache_on + W(b) __armv6_mmu_cache_on W(b) __armv4_mmu_cache_off W(b) __armv6_mmu_cache_flush diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index c1ce813fcc4a..262493752234 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1,21 +1,37 @@ ifeq ($(CONFIG_OF),y) -dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb \ - at91sam9263ek.dtb \ - at91sam9g20ek_2mmc.dtb \ - at91sam9g20ek.dtb \ - at91sam9g25ek.dtb \ - at91sam9m10g45ek.dtb \ - at91sam9n12ek.dtb \ - ethernut5.dtb \ - evk-pro3.dtb \ - kizbox.dtb \ - tny_a9260.dtb \ - tny_a9263.dtb \ - tny_a9g20.dtb \ - usb_a9260.dtb \ - usb_a9263.dtb \ - usb_a9g20.dtb +# Keep at91 dtb files sorted alphabetically for each SoC +# rm9200 +dtb-$(CONFIG_ARCH_AT91) += at91rm9200ek.dtb +# sam9260 +dtb-$(CONFIG_ARCH_AT91) += animeo_ip.dtb +dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb +dtb-$(CONFIG_ARCH_AT91) += ethernut5.dtb +dtb-$(CONFIG_ARCH_AT91) += evk-pro3.dtb +dtb-$(CONFIG_ARCH_AT91) += tny_a9260.dtb +dtb-$(CONFIG_ARCH_AT91) += usb_a9260.dtb +# sam9263 +dtb-$(CONFIG_ARCH_AT91) += at91sam9263ek.dtb +dtb-$(CONFIG_ARCH_AT91) += tny_a9263.dtb +dtb-$(CONFIG_ARCH_AT91) += usb_a9263.dtb +# sam9g20 +dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek.dtb +dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek_2mmc.dtb +dtb-$(CONFIG_ARCH_AT91) += kizbox.dtb +dtb-$(CONFIG_ARCH_AT91) += tny_a9g20.dtb +dtb-$(CONFIG_ARCH_AT91) += usb_a9g20.dtb +# sam9g45 +dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb +dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb +# sam9n12 +dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb +# sam9x5 +dtb-$(CONFIG_ARCH_AT91) += at91sam9g15ek.dtb +dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb +dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb +dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb +dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb + dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ dove-cubox.dtb \ @@ -25,6 +41,8 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos4210-trats.dtb \ exynos5250-smdk5250.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb +dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ + integratorcp.dtb dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \ kirkwood-dns325.dtb \ @@ -102,4 +120,12 @@ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \ wm8505-ref.dtb \ wm8650-mid.dtb +targets += dtbs endif + +# *.dtb used to be generated in the directory above. Clean out the +# old build results so people don't accidentally use them. +dtbs: $(addprefix $(obj)/, $(dtb-y)) + $(Q)rm -f $(obj)/../*.dtb + +clean-files := *.dtb diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts new file mode 100644 index 000000000000..74d92cd29d87 --- /dev/null +++ b/arch/arm/boot/dts/animeo_ip.dts @@ -0,0 +1,178 @@ +/* + * animeo_ip.dts - Device Tree file for Somfy Animeo IP Boards + * + * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2 only. + */ + +/dts-v1/; +/include/ "at91sam9260.dtsi" + +/ { + model = "Somfy Animeo IP"; + compatible = "somfy,animeo-ip", "atmel,at91sam9260", "atmel,at91sam9"; + + aliases { + serial0 = &usart1; + serial1 = &usart2; + serial2 = &usart0; + serial3 = &dbgu; + serial4 = &usart3; + serial5 = &uart0; + serial6 = &uart1; + }; + + chosen { + linux,stdout-path = &usart2; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <18432000>; + }; + }; + + ahb { + apb { + usart0: serial@fffb0000 { + pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts>; + linux,rs485-enabled-at-boot-time; + status = "okay"; + }; + + usart1: serial@fffb4000 { + pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts>; + linux,rs485-enabled-at-boot-time; + status = "okay"; + }; + + usart2: serial@fffb8000 { + pinctrl-0 = <&pinctrl_usart2>; + status = "okay"; + }; + + macb0: ethernet@fffc4000 { + pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii>; + phy-mode = "mii"; + status = "okay"; + }; + + mmc0: mmc@fffa8000 { + pinctrl-0 = <&pinctrl_mmc0_clk + &pinctrl_mmc0_slot1_cmd_dat0 + &pinctrl_mmc0_slot1_dat1_3>; + status = "okay"; + + slot@1 { + reg = <1>; + bus-width = <4>; + }; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x8000>; + }; + + barebox@8000 { + label = "barebox"; + reg = <0x8000 0x40000>; + }; + + bareboxenv@48000 { + label = "bareboxenv"; + reg = <0x48000 0x8000>; + }; + + user_block@0x50000 { + label = "user_block"; + reg = <0x50000 0xb0000>; + }; + + kernel@100000 { + label = "kernel"; + reg = <0x100000 0x1b0000>; + }; + + root@2b0000 { + label = "root"; + reg = <0x2b0000 0x1D50000>; + }; + }; + + usb0: ohci@00500000 { + num-ports = <2>; + atmel,vbus-gpio = <&pioB 15 1>; + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + + power_green { + label = "power_green"; + gpios = <&pioC 17 0>; + linux,default-trigger = "heartbeat"; + }; + + power_red { + label = "power_red"; + gpios = <&pioA 2 0>; + }; + + tx_green { + label = "tx_green"; + gpios = <&pioC 19 0>; + }; + + tx_red { + label = "tx_red"; + gpios = <&pioC 18 0>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + keyswitch_in { + label = "keyswitch_in"; + gpios = <&pioB 1 0>; + linux,code = <28>; + gpio-key,wakeup; + }; + + error_in { + label = "error_in"; + gpios = <&pioB 2 0>; + linux,code = <29>; + gpio-key,wakeup; + }; + + btn { + label = "btn"; + gpios = <&pioC 23 0>; + linux,code = <31>; + gpio-key,wakeup; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi new file mode 100644 index 000000000000..e154f242c680 --- /dev/null +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -0,0 +1,349 @@ +/* + * at91rm9200.dtsi - Device Tree Include file for AT91RM9200 family SoC + * + * Copyright (C) 2011 Atmel, + * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>, + * 2012 Joachim Eastwood <manabian@gmail.com> + * + * Based on at91sam9260.dtsi + * + * Licensed under GPLv2 or later. + */ + +/include/ "skeleton.dtsi" + +/ { + model = "Atmel AT91RM9200 family SoC"; + compatible = "atmel,at91rm9200"; + interrupt-parent = <&aic>; + + aliases { + serial0 = &dbgu; + serial1 = &usart0; + serial2 = &usart1; + serial3 = &usart2; + serial4 = &usart3; + gpio0 = &pioA; + gpio1 = &pioB; + gpio2 = &pioC; + gpio3 = &pioD; + tcb0 = &tcb0; + tcb1 = &tcb1; + }; + cpus { + cpu@0 { + compatible = "arm,arm920t"; + }; + }; + + memory { + reg = <0x20000000 0x04000000>; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + aic: interrupt-controller@fffff000 { + #interrupt-cells = <3>; + compatible = "atmel,at91rm9200-aic"; + interrupt-controller; + reg = <0xfffff000 0x200>; + atmel,external-irqs = <25 26 27 28 29 30 31>; + }; + + ramc0: ramc@ffffff00 { + compatible = "atmel,at91rm9200-sdramc"; + reg = <0xffffff00 0x100>; + }; + + pmc: pmc@fffffc00 { + compatible = "atmel,at91rm9200-pmc"; + reg = <0xfffffc00 0x100>; + }; + + st: timer@fffffd00 { + compatible = "atmel,at91rm9200-st"; + reg = <0xfffffd00 0x100>; + interrupts = <1 4 7>; + }; + + tcb0: timer@fffa0000 { + compatible = "atmel,at91rm9200-tcb"; + reg = <0xfffa0000 0x100>; + interrupts = <17 4 0 18 4 0 19 4 0>; + }; + + tcb1: timer@fffa4000 { + compatible = "atmel,at91rm9200-tcb"; + reg = <0xfffa4000 0x100>; + interrupts = <20 4 0 21 4 0 22 4 0>; + }; + + pinctrl@fffff400 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff400 0xfffff400 0x800>; + + atmel,mux-mask = < + /* A B */ + 0xffffffff 0xffffffff /* pioA */ + 0xffffffff 0x083fffff /* pioB */ + 0xffff3fff 0x00000000 /* pioC */ + 0x03ff87ff 0x0fffff80 /* pioD */ + >; + + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <0 30 0x1 0x0 /* PA30 periph A */ + 0 31 0x1 0x1>; /* PA31 periph with pullup */ + }; + }; + + uart0 { + pinctrl_uart0: uart0-0 { + atmel,pins = + <0 17 0x1 0x0 /* PA17 periph A */ + 0 18 0x1 0x0>; /* PA18 periph A */ + }; + + pinctrl_uart0_rts: uart0_rts-0 { + atmel,pins = + <0 20 0x1 0x0>; /* PA20 periph A */ + }; + + pinctrl_uart0_cts: uart0_cts-0 { + atmel,pins = + <0 21 0x1 0x0>; /* PA21 periph A */ + }; + }; + + uart1 { + pinctrl_uart1: uart1-0 { + atmel,pins = + <1 20 0x1 0x1 /* PB20 periph A with pullup */ + 1 21 0x1 0x0>; /* PB21 periph A */ + }; + + pinctrl_uart1_rts: uart1_rts-0 { + atmel,pins = + <1 24 0x1 0x0>; /* PB24 periph A */ + }; + + pinctrl_uart1_cts: uart1_cts-0 { + atmel,pins = + <1 26 0x1 0x0>; /* PB26 periph A */ + }; + + pinctrl_uart1_dtr_dsr: uart1_dtr_dsr-0 { + atmel,pins = + <1 19 0x1 0x0 /* PB19 periph A */ + 1 25 0x1 0x0>; /* PB25 periph A */ + }; + + pinctrl_uart1_dcd: uart1_dcd-0 { + atmel,pins = + <1 23 0x1 0x0>; /* PB23 periph A */ + }; + + pinctrl_uart1_ri: uart1_ri-0 { + atmel,pins = + <1 18 0x1 0x0>; /* PB18 periph A */ + }; + }; + + uart2 { + pinctrl_uart2: uart2-0 { + atmel,pins = + <0 22 0x1 0x0 /* PA22 periph A */ + 0 23 0x1 0x1>; /* PA23 periph A with pullup */ + }; + + pinctrl_uart2_rts: uart2_rts-0 { + atmel,pins = + <0 30 0x2 0x0>; /* PA30 periph B */ + }; + + pinctrl_uart2_cts: uart2_cts-0 { + atmel,pins = + <0 31 0x2 0x0>; /* PA31 periph B */ + }; + }; + + uart3 { + pinctrl_uart3: uart3-0 { + atmel,pins = + <0 5 0x2 0x1 /* PA5 periph B with pullup */ + 0 6 0x2 0x0>; /* PA6 periph B */ + }; + + pinctrl_uart3_rts: uart3_rts-0 { + atmel,pins = + <1 0 0x2 0x0>; /* PB0 periph B */ + }; + + pinctrl_uart3_cts: uart3_cts-0 { + atmel,pins = + <1 1 0x2 0x0>; /* PB1 periph B */ + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <2 2 0x0 0x1 /* PC2 gpio RDY pin pull_up */ + 1 1 0x0 0x1>; /* PB1 gpio CD pin pull_up */ + }; + }; + + pioA: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <4 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioD: gpio@fffffa00 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <5 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + dbgu: serial@fffff200 { + compatible = "atmel,at91rm9200-usart"; + reg = <0xfffff200 0x200>; + interrupts = <1 4 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; + status = "disabled"; + }; + + usart0: serial@fffc0000 { + compatible = "atmel,at91rm9200-usart"; + reg = <0xfffc0000 0x200>; + interrupts = <6 4 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "disabled"; + }; + + usart1: serial@fffc4000 { + compatible = "atmel,at91rm9200-usart"; + reg = <0xfffc4000 0x200>; + interrupts = <7 4 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "disabled"; + }; + + usart2: serial@fffc8000 { + compatible = "atmel,at91rm9200-usart"; + reg = <0xfffc8000 0x200>; + interrupts = <8 4 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "disabled"; + }; + + usart3: serial@fffcc000 { + compatible = "atmel,at91rm9200-usart"; + reg = <0xfffcc000 0x200>; + interrupts = <23 4 5>; + atmel,use-dma-rx; + atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "disabled"; + }; + + usb1: gadget@fffb0000 { + compatible = "atmel,at91rm9200-udc"; + reg = <0xfffb0000 0x4000>; + interrupts = <11 4 2>; + status = "disabled"; + }; + }; + + nand0: nand@40000000 { + compatible = "atmel,at91rm9200-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40000000 0x10000000>; + atmel,nand-addr-offset = <21>; + atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + nand-ecc-mode = "soft"; + gpios = <&pioC 2 0 + 0 + &pioB 1 0 + >; + status = "disabled"; + }; + + usb0: ohci@00300000 { + compatible = "atmel,at91rm9200-ohci", "usb-ohci"; + reg = <0x00300000 0x100000>; + interrupts = <23 4 2>; + status = "disabled"; + }; + }; + + i2c@0 { + compatible = "i2c-gpio"; + gpios = <&pioA 23 0 /* sda */ + &pioA 24 0 /* scl */ + >; + i2c-gpio,sda-open-drain; + i2c-gpio,scl-open-drain; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts new file mode 100644 index 000000000000..8aa48931e0a2 --- /dev/null +++ b/arch/arm/boot/dts/at91rm9200ek.dts @@ -0,0 +1,79 @@ +/* + * at91rm9200ek.dts - Device Tree file for Atmel AT91RM9200 evaluation kit + * + * Copyright (C) 2012 Joachim Eastwood <manabian@gmail.com> + * + * Licensed under GPLv2 only + */ +/dts-v1/; +/include/ "at91rm9200.dtsi" + +/ { + model = "Atmel AT91RM9200 evaluation kit"; + compatible = "atmel,at91rm9200ek", "atmel,at91rm9200"; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <18432000>; + }; + }; + + ahb { + apb { + dbgu: serial@fffff200 { + status = "okay"; + }; + + usart1: serial@fffc4000 { + pinctrl-0 = + <&pinctrl_uart1 + &pinctrl_uart1_rts + &pinctrl_uart1_cts + &pinctrl_uart1_dtr_dsr + &pinctrl_uart1_dcd + &pinctrl_uart1_ri>; + status = "okay"; + }; + + usb1: gadget@fffb0000 { + atmel,vbus-gpio = <&pioD 4 0>; + status = "okay"; + }; + }; + + usb0: ohci@00300000 { + num-ports = <2>; + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + + ds2 { + label = "green"; + gpios = <&pioB 0 0x1>; + linux,default-trigger = "mmc0"; + }; + + ds4 { + label = "yellow"; + gpios = <&pioB 1 0x1>; + linux,default-trigger = "heartbeat"; + }; + + ds6 { + label = "red"; + gpios = <&pioB 2 0x1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index d410581a5a85..b1d3fab60e0a 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -21,8 +21,8 @@ serial2 = &usart1; serial3 = &usart2; serial4 = &usart3; - serial5 = &usart4; - serial6 = &usart5; + serial5 = &uart0; + serial6 = &uart1; gpio0 = &pioA; gpio1 = &pioB; gpio2 = &pioC; @@ -98,40 +98,250 @@ interrupts = <26 4 0 27 4 0 28 4 0>; }; - pioA: gpio@fffff400 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + pinctrl@fffff400 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff400 0xfffff400 0x600>; + + atmel,mux-mask = < + /* A B */ + 0xffffffff 0xffc00c3b /* pioA */ + 0xffffffff 0x7fff3ccf /* pioB */ + 0xffffffff 0x007fffff /* pioC */ + >; + + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <1 14 0x1 0x0 /* PB14 periph A */ + 1 15 0x1 0x1>; /* PB15 periph with pullup */ + }; + }; - pioB: gpio@fffff600 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <1 4 0x1 0x0 /* PB4 periph A */ + 1 5 0x1 0x0>; /* PB5 periph A */ + }; + + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = + <1 26 0x1 0x0>; /* PB26 periph A */ + }; + + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = + <1 27 0x1 0x0>; /* PB27 periph A */ + }; + + pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 { + atmel,pins = + <1 24 0x1 0x0 /* PB24 periph A */ + 1 22 0x1 0x0>; /* PB22 periph A */ + }; + + pinctrl_usart0_dcd: usart0_dcd-0 { + atmel,pins = + <1 23 0x1 0x0>; /* PB23 periph A */ + }; + + pinctrl_usart0_ri: usart0_ri-0 { + atmel,pins = + <1 25 0x1 0x0>; /* PB25 periph A */ + }; + }; - pioC: gpio@fffff800 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x100>; - interrupts = <4 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + usart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <2 6 0x1 0x1 /* PB6 periph A with pullup */ + 2 7 0x1 0x0>; /* PB7 periph A */ + }; + + pinctrl_usart1_rts: usart1_rts-0 { + atmel,pins = + <1 28 0x1 0x0>; /* PB28 periph A */ + }; + + pinctrl_usart1_cts: usart1_cts-0 { + atmel,pins = + <1 29 0x1 0x0>; /* PB29 periph A */ + }; + }; + + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <1 8 0x1 0x1 /* PB8 periph A with pullup */ + 1 9 0x1 0x0>; /* PB9 periph A */ + }; + + pinctrl_usart2_rts: usart2_rts-0 { + atmel,pins = + <0 4 0x1 0x0>; /* PA4 periph A */ + }; + + pinctrl_usart2_cts: usart2_cts-0 { + atmel,pins = + <0 5 0x1 0x0>; /* PA5 periph A */ + }; + }; + + usart3 { + pinctrl_usart3: usart3-0 { + atmel,pins = + <2 10 0x1 0x1 /* PB10 periph A with pullup */ + 2 11 0x1 0x0>; /* PB11 periph A */ + }; + + pinctrl_usart3_rts: usart3_rts-0 { + atmel,pins = + <3 8 0x2 0x0>; /* PB8 periph B */ + }; + + pinctrl_usart3_cts: usart3_cts-0 { + atmel,pins = + <3 10 0x2 0x0>; /* PB10 periph B */ + }; + }; + + uart0 { + pinctrl_uart0: uart0-0 { + atmel,pins = + <0 31 0x2 0x1 /* PA31 periph B with pullup */ + 0 30 0x2 0x0>; /* PA30 periph B */ + }; + }; + + uart1 { + pinctrl_uart1: uart1-0 { + atmel,pins = + <2 12 0x1 0x1 /* PB12 periph A with pullup */ + 2 13 0x1 0x0>; /* PB13 periph A */ + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <2 13 0x0 0x1 /* PC13 gpio RDY pin pull_up */ + 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */ + }; + }; + + macb { + pinctrl_macb_rmii: macb_rmii-0 { + atmel,pins = + <0 12 0x1 0x0 /* PA12 periph A */ + 0 13 0x1 0x0 /* PA13 periph A */ + 0 14 0x1 0x0 /* PA14 periph A */ + 0 15 0x1 0x0 /* PA15 periph A */ + 0 16 0x1 0x0 /* PA16 periph A */ + 0 17 0x1 0x0 /* PA17 periph A */ + 0 18 0x1 0x0 /* PA18 periph A */ + 0 19 0x1 0x0 /* PA19 periph A */ + 0 20 0x1 0x0 /* PA20 periph A */ + 0 21 0x1 0x0>; /* PA21 periph A */ + }; + + pinctrl_macb_rmii_mii: macb_rmii_mii-0 { + atmel,pins = + <0 22 0x2 0x0 /* PA22 periph B */ + 0 23 0x2 0x0 /* PA23 periph B */ + 0 24 0x2 0x0 /* PA24 periph B */ + 0 25 0x2 0x0 /* PA25 periph B */ + 0 26 0x2 0x0 /* PA26 periph B */ + 0 27 0x2 0x0 /* PA27 periph B */ + 0 28 0x2 0x0 /* PA28 periph B */ + 0 29 0x2 0x0>; /* PA29 periph B */ + }; + + pinctrl_macb_rmii_mii_alt: macb_rmii_mii-1 { + atmel,pins = + <0 10 0x2 0x0 /* PA10 periph B */ + 0 11 0x2 0x0 /* PA11 periph B */ + 0 24 0x2 0x0 /* PA24 periph B */ + 0 25 0x2 0x0 /* PA25 periph B */ + 0 26 0x2 0x0 /* PA26 periph B */ + 0 27 0x2 0x0 /* PA27 periph B */ + 0 28 0x2 0x0 /* PA28 periph B */ + 0 29 0x2 0x0>; /* PA29 periph B */ + }; + }; + + mmc0 { + pinctrl_mmc0_clk: mmc0_clk-0 { + atmel,pins = + <0 8 0x1 0x0>; /* PA8 periph A */ + }; + + pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { + atmel,pins = + <0 7 0x1 0x1 /* PA7 periph A with pullup */ + 0 6 0x1 0x1>; /* PA6 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + <0 9 0x1 0x1 /* PA9 periph A with pullup */ + 0 10 0x1 0x1 /* PA10 periph A with pullup */ + 0 11 0x1 0x1>; /* PA11 periph A with pullup */ + }; + + pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 { + atmel,pins = + <0 1 0x2 0x1 /* PA1 periph B with pullup */ + 0 0 0x2 0x1>; /* PA0 periph B with pullup */ + }; + + pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 { + atmel,pins = + <0 5 0x2 0x1 /* PA5 periph B with pullup */ + 0 4 0x2 0x1 /* PA4 periph B with pullup */ + 0 3 0x2 0x1>; /* PA3 periph B with pullup */ + }; + }; + + pioA: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <4 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; }; dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 4 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; }; @@ -141,6 +351,8 @@ interrupts = <6 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; }; @@ -150,6 +362,8 @@ interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; }; @@ -159,6 +373,8 @@ interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; }; @@ -168,24 +384,30 @@ interrupts = <23 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart3>; status = "disabled"; }; - usart4: serial@fffd4000 { + uart0: serial@fffd4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd4000 0x200>; interrupts = <24 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; status = "disabled"; }; - usart5: serial@fffd8000 { + uart1: serial@fffd8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd8000 0x200>; interrupts = <25 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; status = "disabled"; }; @@ -193,6 +415,8 @@ compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffc4000 0x100>; interrupts = <21 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb_rmii>; status = "disabled"; }; @@ -212,6 +436,15 @@ status = "disabled"; }; + mmc0: mmc@fffa8000 { + compatible = "atmel,hsmci"; + reg = <0xfffa8000 0x600>; + interrupts = <9 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + adc0: adc@fffe0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffe0000 0x100>; @@ -257,6 +490,8 @@ >; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; gpios = <&pioC 13 0 &pioC 14 0 0 diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 3e6e5c1abbf3..66106eecf1ed 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -89,60 +89,243 @@ reg = <0xfffffd10 0x10>; }; - pioA: gpio@fffff200 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff200 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + pinctrl@fffff200 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff200 0xfffff200 0xa00>; - pioB: gpio@fffff400 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + atmel,mux-mask = < + /* A B */ + 0xfffffffb 0xffffe07f /* pioA */ + 0x0007ffff 0x39072fff /* pioB */ + 0xffffffff 0x3ffffff8 /* pioC */ + 0xfffffbff 0xffffffff /* pioD */ + 0xffe00fff 0xfbfcff00 /* pioE */ + >; - pioC: gpio@fffff600 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x100>; - interrupts = <4 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <2 30 0x1 0x0 /* PC30 periph A */ + 2 31 0x1 0x1>; /* PC31 periph with pullup */ + }; + }; - pioD: gpio@fffff800 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x100>; - interrupts = <4 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <0 26 0x1 0x1 /* PA26 periph A with pullup */ + 0 27 0x1 0x0>; /* PA27 periph A */ + }; - pioE: gpio@fffffa00 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffffa00 0x100>; - interrupts = <4 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = + <0 28 0x1 0x0>; /* PA28 periph A */ + }; + + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = + <0 29 0x1 0x0>; /* PA29 periph A */ + }; + }; + + usart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <3 0 0x1 0x1 /* PD0 periph A with pullup */ + 3 1 0x1 0x0>; /* PD1 periph A */ + }; + + pinctrl_usart1_rts: usart1_rts-0 { + atmel,pins = + <3 7 0x2 0x0>; /* PD7 periph B */ + }; + + pinctrl_usart1_cts: usart1_cts-0 { + atmel,pins = + <3 8 0x2 0x0>; /* PD8 periph B */ + }; + }; + + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <3 2 0x1 0x1 /* PD2 periph A with pullup */ + 3 3 0x1 0x0>; /* PD3 periph A */ + }; + + pinctrl_usart2_rts: usart2_rts-0 { + atmel,pins = + <3 5 0x2 0x0>; /* PD5 periph B */ + }; + + pinctrl_usart2_cts: usart2_cts-0 { + atmel,pins = + <4 6 0x2 0x0>; /* PD6 periph B */ + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <0 22 0x0 0x1 /* PA22 gpio RDY pin pull_up*/ + 3 15 0x0 0x1>; /* PD15 gpio enable pin pull_up */ + }; + }; + + macb { + pinctrl_macb_rmii: macb_rmii-0 { + atmel,pins = + <2 25 0x2 0x0 /* PC25 periph B */ + 4 21 0x1 0x0 /* PE21 periph A */ + 4 23 0x1 0x0 /* PE23 periph A */ + 4 24 0x1 0x0 /* PE24 periph A */ + 4 25 0x1 0x0 /* PE25 periph A */ + 4 26 0x1 0x0 /* PE26 periph A */ + 4 27 0x1 0x0 /* PE27 periph A */ + 4 28 0x1 0x0 /* PE28 periph A */ + 4 29 0x1 0x0 /* PE29 periph A */ + 4 30 0x1 0x0>; /* PE30 periph A */ + }; + + pinctrl_macb_rmii_mii: macb_rmii_mii-0 { + atmel,pins = + <2 20 0x2 0x0 /* PC20 periph B */ + 2 21 0x2 0x0 /* PC21 periph B */ + 2 22 0x2 0x0 /* PC22 periph B */ + 2 23 0x2 0x0 /* PC23 periph B */ + 2 24 0x2 0x0 /* PC24 periph B */ + 2 25 0x2 0x0 /* PC25 periph B */ + 2 27 0x2 0x0 /* PC27 periph B */ + 4 22 0x2 0x0>; /* PE22 periph B */ + }; + }; + + mmc0 { + pinctrl_mmc0_clk: mmc0_clk-0 { + atmel,pins = + <0 12 0x1 0x0>; /* PA12 periph A */ + }; + + pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { + atmel,pins = + <0 1 0x1 0x1 /* PA1 periph A with pullup */ + 0 0 0x1 0x1>; /* PA0 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + <0 3 0x1 0x1 /* PA3 periph A with pullup */ + 0 4 0x1 0x1 /* PA4 periph A with pullup */ + 0 5 0x1 0x1>; /* PA5 periph A with pullup */ + }; + + pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 { + atmel,pins = + <0 16 0x1 0x1 /* PA16 periph A with pullup */ + 0 17 0x1 0x1>; /* PA17 periph A with pullup */ + }; + + pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 { + atmel,pins = + <0 18 0x1 0x1 /* PA18 periph A with pullup */ + 0 19 0x1 0x1 /* PA19 periph A with pullup */ + 0 20 0x1 0x1>; /* PA20 periph A with pullup */ + }; + }; + + mmc1 { + pinctrl_mmc1_clk: mmc1_clk-0 { + atmel,pins = + <0 6 0x1 0x0>; /* PA6 periph A */ + }; + + pinctrl_mmc1_slot0_cmd_dat0: mmc1_slot0_cmd_dat0-0 { + atmel,pins = + <0 7 0x1 0x1 /* PA7 periph A with pullup */ + 0 8 0x1 0x1>; /* PA8 periph A with pullup */ + }; + + pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { + atmel,pins = + <0 9 0x1 0x1 /* PA9 periph A with pullup */ + 0 10 0x1 0x1 /* PA10 periph A with pullup */ + 0 11 0x1 0x1>; /* PA11 periph A with pullup */ + }; + + pinctrl_mmc1_slot1_cmd_dat0: mmc1_slot1_cmd_dat0-0 { + atmel,pins = + <0 21 0x1 0x1 /* PA21 periph A with pullup */ + 0 22 0x1 0x1>; /* PA22 periph A with pullup */ + }; + + pinctrl_mmc1_slot1_dat1_3: mmc1_slot1_dat1_3-0 { + atmel,pins = + <0 23 0x1 0x1 /* PA23 periph A with pullup */ + 0 24 0x1 0x1 /* PA24 periph A with pullup */ + 0 25 0x1 0x1>; /* PA25 periph A with pullup */ + }; + }; + + pioA: gpio@fffff200 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff200 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <4 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioD: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <4 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioE: gpio@fffffa00 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <4 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; }; dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; interrupts = <1 4 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; }; @@ -152,6 +335,8 @@ interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; }; @@ -161,6 +346,8 @@ interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; }; @@ -170,6 +357,8 @@ interrupts = <9 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; }; @@ -177,6 +366,8 @@ compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; interrupts = <21 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb_rmii>; status = "disabled"; }; @@ -195,6 +386,24 @@ #size-cells = <0>; status = "disabled"; }; + + mmc0: mmc@fff80000 { + compatible = "atmel,hsmci"; + reg = <0xfff80000 0x600>; + interrupts = <10 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mmc1: mmc@fff84000 { + compatible = "atmel,hsmci"; + reg = <0xfff84000 0x600>; + interrupts = <11 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; nand0: nand@40000000 { @@ -206,6 +415,8 @@ >; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; gpios = <&pioA 22 0 &pioD 15 0 0 diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index f86ac4b609fc..1eb08728f527 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -38,6 +38,10 @@ }; usart0: serial@fff8c000 { + pinctrl-0 = < + &pinctrl_usart0 + &pinctrl_usart0_rts + &pinctrl_usart0_cts>; status = "okay"; }; @@ -50,6 +54,31 @@ atmel,vbus-gpio = <&pioA 25 0>; status = "okay"; }; + + mmc0: mmc@fff80000 { + pinctrl-0 = < + &pinctrl_board_mmc0 + &pinctrl_mmc0_clk + &pinctrl_mmc0_slot0_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioE 18 0>; + wp-gpios = <&pioE 19 0>; + }; + }; + + pinctrl@fffff200 { + mmc0 { + pinctrl_board_mmc0: mmc0-board { + atmel,pins = + <5 18 0x0 0x5 /* PE18 gpio CD pin pull up and deglitch */ + 5 19 0x0 0x1>; /* PE19 gpio WP pin pull up */ + }; + }; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/at91sam9g15.dtsi new file mode 100644 index 000000000000..fbe7a7089c2a --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g15.dtsi @@ -0,0 +1,28 @@ +/* + * at91sam9g15.dtsi - Device Tree Include file for AT91SAM9G15 SoC + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ + +/include/ "at91sam9x5.dtsi" + +/ { + model = "Atmel AT91SAM9G15 SoC"; + compatible = "atmel, at91sam9g15, atmel,at91sam9x5"; + + ahb { + apb { + pinctrl@fffff400 { + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe0399f 0x00000000 /* pioA */ + 0x00040000 0x00047e3f 0x00000000 /* pioB */ + 0xfdffffff 0x00000000 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9g15ek.dts b/arch/arm/boot/dts/at91sam9g15ek.dts new file mode 100644 index 000000000000..86dd3f6d938f --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g15ek.dts @@ -0,0 +1,16 @@ +/* + * at91sam9g15ek.dts - Device Tree file for AT91SAM9G15-EK board + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "at91sam9g15.dtsi" +/include/ "at91sam9x5ek.dtsi" + +/ { + model = "Atmel AT91SAM9G25-EK"; + compatible = "atmel,at91sam9g15ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; +}; diff --git a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts index f1b2e148ac8c..66467b113126 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts +++ b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts @@ -12,6 +12,32 @@ model = "Atmel at91sam9g20ek 2 mmc"; compatible = "atmel,at91sam9g20ek_2mmc", "atmel,at91sam9g20", "atmel,at91sam9"; + ahb { + apb{ + mmc0: mmc@fffa8000 { + /* clk already mux wuth slot0 */ + pinctrl-0 = < + &pinctrl_board_mmc0_slot0 + &pinctrl_mmc0_slot0_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioC 2 0>; + }; + }; + + pinctrl@fffff400 { + mmc0_slot0 { + pinctrl_board_mmc0_slot0: mmc0_slot0-board { + atmel,pins = + <2 2 0x0 0x5>; /* PC2 gpio CD pin pull up and deglitch */ + }; + }; + }; + }; + }; + leds { compatible = "gpio-leds"; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index b06c0db273b1..32a500a0e481 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -35,6 +35,13 @@ }; usart0: serial@fffb0000 { + pinctrl-0 = + <&pinctrl_usart0 + &pinctrl_usart0_rts + &pinctrl_usart0_cts + &pinctrl_usart0_dtr_dsr + &pinctrl_usart0_dcd + &pinctrl_usart0_ri>; status = "okay"; }; @@ -51,6 +58,29 @@ atmel,vbus-gpio = <&pioC 5 0>; status = "okay"; }; + + mmc0: mmc@fffa8000 { + pinctrl-0 = < + &pinctrl_board_mmc0_slot1 + &pinctrl_mmc0_clk + &pinctrl_mmc0_slot1_cmd_dat0 + &pinctrl_mmc0_slot1_dat1_3>; + status = "okay"; + slot@1 { + reg = <1>; + bus-width = <4>; + cd-gpios = <&pioC 9 0>; + }; + }; + + pinctrl@fffff400 { + mmc0_slot1 { + pinctrl_board_mmc0_slot1: mmc0_slot1-board { + atmel,pins = + <2 9 0x0 0x5>; /* PC9 gpio CD pin pull up and deglitch */ + }; + }; + }; }; nand0: nand@40000000 { @@ -126,14 +156,14 @@ #size-cells = <0>; btn3 { - label = "Buttin 3"; + label = "Button 3"; gpios = <&pioA 30 1>; linux,code = <0x103>; gpio-key,wakeup; }; btn4 { - label = "Buttin 4"; + label = "Button 4"; gpios = <&pioA 31 1>; linux,code = <0x104>; gpio-key,wakeup; diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi new file mode 100644 index 000000000000..05a718fb83c4 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g25.dtsi @@ -0,0 +1,28 @@ +/* + * at91sam9g25.dtsi - Device Tree Include file for AT91SAM9G25 SoC + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ + +/include/ "at91sam9x5.dtsi" + +/ { + model = "Atmel AT91SAM9G25 SoC"; + compatible = "atmel, at91sam9g25, atmel,at91sam9x5"; + + ahb { + apb { + pinctrl@fffff400 { + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe0399f 0xc000001c /* pioA */ + 0x0007ffff 0x8000fe3f 0x00000000 /* pioB */ + 0x80000000 0x07c0ffff 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index 877c08f06763..c5ab16fba059 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -7,55 +7,10 @@ * Licensed under GPLv2 or later. */ /dts-v1/; -/include/ "at91sam9x5.dtsi" -/include/ "at91sam9x5cm.dtsi" +/include/ "at91sam9g25.dtsi" +/include/ "at91sam9x5ek.dtsi" / { model = "Atmel AT91SAM9G25-EK"; compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; - - chosen { - bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; - }; - - ahb { - apb { - dbgu: serial@fffff200 { - status = "okay"; - }; - - usart0: serial@f801c000 { - status = "okay"; - }; - - macb0: ethernet@f802c000 { - phy-mode = "rmii"; - status = "okay"; - }; - - i2c0: i2c@f8010000 { - status = "okay"; - }; - - i2c1: i2c@f8014000 { - status = "okay"; - }; - - i2c2: i2c@f8018000 { - status = "okay"; - }; - }; - - usb0: ohci@00600000 { - status = "okay"; - num-ports = <2>; - atmel,vbus-gpio = <&pioD 19 1 - &pioD 20 1 - >; - }; - - usb1: ehci@00700000 { - status = "okay"; - }; - }; }; diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi new file mode 100644 index 000000000000..f9d14a722794 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g35.dtsi @@ -0,0 +1,28 @@ +/* + * at91sam9g35.dtsi - Device Tree Include file for AT91SAM9G35 SoC + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ + +/include/ "at91sam9x5.dtsi" + +/ { + model = "Atmel AT91SAM9G35 SoC"; + compatible = "atmel, at91sam9g35, atmel,at91sam9x5"; + + ahb { + apb { + pinctrl@fffff400 { + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe0399f 0xc000000c /* pioA */ + 0x000406ff 0x00047e3f 0x00000000 /* pioB */ + 0xfdffffff 0x00000000 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9g35ek.dts b/arch/arm/boot/dts/at91sam9g35ek.dts new file mode 100644 index 000000000000..95944bdd798d --- /dev/null +++ b/arch/arm/boot/dts/at91sam9g35ek.dts @@ -0,0 +1,16 @@ +/* + * at91sam9g35ek.dts - Device Tree file for AT91SAM9G35-EK board + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "at91sam9g35.dtsi" +/include/ "at91sam9x5ek.dtsi" + +/ { + model = "Atmel AT91SAM9G35-EK"; + compatible = "atmel,at91sam9g35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; +}; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 3add030d61f8..0741caeeced1 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -108,60 +108,243 @@ interrupts = <21 4 0>; }; - pioA: gpio@fffff200 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff200 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + pinctrl@fffff200 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff200 0xfffff200 0xa00>; + + atmel,mux-mask = < + /* A B */ + 0xffffffff 0xffc003ff /* pioA */ + 0xffffffff 0x800f8f00 /* pioB */ + 0xffffffff 0x00000e00 /* pioC */ + 0xffffffff 0xff0c1381 /* pioD */ + 0xffffffff 0x81ffff81 /* pioE */ + >; + + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <1 12 0x1 0x0 /* PB12 periph A */ + 1 13 0x1 0x0>; /* PB13 periph A */ + }; + }; - pioB: gpio@fffff400 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <1 19 0x1 0x1 /* PB19 periph A with pullup */ + 1 18 0x1 0x0>; /* PB18 periph A */ + }; + + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = + <1 17 0x2 0x0>; /* PB17 periph B */ + }; + + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = + <1 15 0x2 0x0>; /* PB15 periph B */ + }; + }; - pioC: gpio@fffff600 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x100>; - interrupts = <4 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + uart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <1 4 0x1 0x1 /* PB4 periph A with pullup */ + 1 5 0x1 0x0>; /* PB5 periph A */ + }; + + pinctrl_usart1_rts: usart1_rts-0 { + atmel,pins = + <3 16 0x1 0x0>; /* PD16 periph A */ + }; + + pinctrl_usart1_cts: usart1_cts-0 { + atmel,pins = + <3 17 0x1 0x0>; /* PD17 periph A */ + }; + }; - pioD: gpio@fffff800 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x100>; - interrupts = <5 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <1 6 0x1 0x1 /* PB6 periph A with pullup */ + 1 7 0x1 0x0>; /* PB7 periph A */ + }; + + pinctrl_usart2_rts: usart2_rts-0 { + atmel,pins = + <2 9 0x2 0x0>; /* PC9 periph B */ + }; + + pinctrl_usart2_cts: usart2_cts-0 { + atmel,pins = + <2 11 0x2 0x0>; /* PC11 periph B */ + }; + }; - pioE: gpio@fffffa00 { - compatible = "atmel,at91rm9200-gpio"; - reg = <0xfffffa00 0x100>; - interrupts = <5 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + usart3 { + pinctrl_usart3: usart3-0 { + atmel,pins = + <1 8 0x1 0x1 /* PB9 periph A with pullup */ + 1 9 0x1 0x0>; /* PB8 periph A */ + }; + + pinctrl_usart3_rts: usart3_rts-0 { + atmel,pins = + <0 23 0x2 0x0>; /* PA23 periph B */ + }; + + pinctrl_usart3_cts: usart3_cts-0 { + atmel,pins = + <0 24 0x2 0x0>; /* PA24 periph B */ + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <2 8 0x0 0x1 /* PC8 gpio RDY pin pull_up*/ + 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */ + }; + }; + + macb { + pinctrl_macb_rmii: macb_rmii-0 { + atmel,pins = + <0 10 0x1 0x0 /* PA10 periph A */ + 0 11 0x1 0x0 /* PA11 periph A */ + 0 12 0x1 0x0 /* PA12 periph A */ + 0 13 0x1 0x0 /* PA13 periph A */ + 0 14 0x1 0x0 /* PA14 periph A */ + 0 15 0x1 0x0 /* PA15 periph A */ + 0 16 0x1 0x0 /* PA16 periph A */ + 0 17 0x1 0x0 /* PA17 periph A */ + 0 18 0x1 0x0 /* PA18 periph A */ + 0 19 0x1 0x0>; /* PA19 periph A */ + }; + + pinctrl_macb_rmii_mii: macb_rmii_mii-0 { + atmel,pins = + <0 6 0x2 0x0 /* PA6 periph B */ + 0 7 0x2 0x0 /* PA7 periph B */ + 0 8 0x2 0x0 /* PA8 periph B */ + 0 9 0x2 0x0 /* PA9 periph B */ + 0 27 0x2 0x0 /* PA27 periph B */ + 0 28 0x2 0x0 /* PA28 periph B */ + 0 29 0x2 0x0 /* PA29 periph B */ + 0 30 0x2 0x0>; /* PA30 periph B */ + }; + }; + + mmc0 { + pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { + atmel,pins = + <0 0 0x1 0x0 /* PA0 periph A */ + 0 1 0x1 0x1 /* PA1 periph A with pullup */ + 0 2 0x1 0x1>; /* PA2 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + <0 3 0x1 0x1 /* PA3 periph A with pullup */ + 0 4 0x1 0x1 /* PA4 periph A with pullup */ + 0 5 0x1 0x1>; /* PA5 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 { + atmel,pins = + <0 6 0x1 0x1 /* PA6 periph A with pullup */ + 0 7 0x1 0x1 /* PA7 periph A with pullup */ + 0 8 0x1 0x1 /* PA8 periph A with pullup */ + 0 9 0x1 0x1>; /* PA9 periph A with pullup */ + }; + }; + + mmc1 { + pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 { + atmel,pins = + <0 31 0x1 0x0 /* PA31 periph A */ + 0 22 0x1 0x1 /* PA22 periph A with pullup */ + 0 23 0x1 0x1>; /* PA23 periph A with pullup */ + }; + + pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { + atmel,pins = + <0 24 0x1 0x1 /* PA24 periph A with pullup */ + 0 25 0x1 0x1 /* PA25 periph A with pullup */ + 0 26 0x1 0x1>; /* PA26 periph A with pullup */ + }; + + pinctrl_mmc1_slot0_dat4_7: mmc1_slot0_dat4_7-0 { + atmel,pins = + <0 27 0x1 0x1 /* PA27 periph A with pullup */ + 0 28 0x1 0x1 /* PA28 periph A with pullup */ + 0 29 0x1 0x1 /* PA29 periph A with pullup */ + 0 20 0x1 0x1>; /* PA30 periph A with pullup */ + }; + }; + + pioA: gpio@fffff200 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff200 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff400 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff600 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <4 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioD: gpio@fffff800 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <5 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioE: gpio@fffffa00 { + compatible = "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <5 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; }; dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; interrupts = <1 4 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; }; @@ -171,6 +354,8 @@ interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; }; @@ -180,6 +365,8 @@ interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; }; @@ -189,6 +376,8 @@ interrupts = <9 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; }; @@ -198,6 +387,8 @@ interrupts = <10 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart3>; status = "disabled"; }; @@ -205,6 +396,8 @@ compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; interrupts = <25 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb_rmii>; status = "disabled"; }; @@ -262,6 +455,24 @@ trigger-value = <0x6>; }; }; + + mmc0: mmc@fff80000 { + compatible = "atmel,hsmci"; + reg = <0xfff80000 0x600>; + interrupts = <11 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mmc1: mmc@fffd0000 { + compatible = "atmel,hsmci"; + reg = <0xfffd0000 0x600>; + interrupts = <29 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; nand0: nand@40000000 { @@ -273,6 +484,8 @@ >; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; gpios = <&pioC 8 0 &pioC 14 0 0 diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 15e1dd43f625..20c31913c270 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -39,6 +39,10 @@ }; usart1: serial@fff90000 { + pinctrl-0 = + <&pinctrl_usart1 + &pinctrl_usart1_rts + &pinctrl_usart1_cts>; status = "okay"; }; @@ -54,6 +58,50 @@ i2c1: i2c@fff88000 { status = "okay"; }; + + mmc0: mmc@fff80000 { + pinctrl-0 = < + &pinctrl_board_mmc0 + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 10 0>; + }; + }; + + mmc1: mmc@fffd0000 { + pinctrl-0 = < + &pinctrl_board_mmc1 + &pinctrl_mmc1_slot0_clk_cmd_dat0 + &pinctrl_mmc1_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 11 0>; + wp-gpios = <&pioD 29 0>; + }; + }; + + pinctrl@fffff200 { + mmc0 { + pinctrl_board_mmc0: mmc0-board { + atmel,pins = + <3 10 0x0 0x5>; /* PD10 gpio CD pin pull up and deglitch */ + }; + }; + + mmc1 { + pinctrl_board_mmc1: mmc1-board { + atmel,pins = + <3 11 0x0 0x5 /* PD11 gpio CD pin pull up and deglitch */ + 3 29 0x0 0x1>; /* PD29 gpio WP pin pull up */ + }; + }; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 82508d68aa7e..e9efb34f4379 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -84,6 +84,15 @@ reg = <0xfffffe10 0x10>; }; + mmc0: mmc@f0008000 { + compatible = "atmel,hsmci"; + reg = <0xf0008000 0x600>; + interrupts = <12 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; @@ -102,50 +111,186 @@ interrupts = <20 4 0>; }; - pioA: gpio@fffff400 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + pinctrl@fffff400 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff400 0xfffff400 0x800>; - pioB: gpio@fffff600 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe07983 0x00000000 /* pioA */ + 0x00040000 0x00047e0f 0x00000000 /* pioB */ + 0xfdffffff 0x07c00000 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; - pioC: gpio@fffff800 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <0 9 0x1 0x0 /* PA9 periph A */ + 0 10 0x1 0x1>; /* PA10 periph with pullup */ + }; + }; - pioD: gpio@fffffa00 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffffa00 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <0 1 0x1 0x1 /* PA1 periph A with pullup */ + 0 0 0x1 0x0>; /* PA0 periph A */ + }; + + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = + <0 2 0x1 0x0>; /* PA2 periph A */ + }; + + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = + <0 3 0x1 0x0>; /* PA3 periph A */ + }; + }; + + usart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <0 6 0x1 0x1 /* PA6 periph A with pullup */ + 0 5 0x1 0x0>; /* PA5 periph A */ + }; + }; + + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <0 8 0x1 0x1 /* PA8 periph A with pullup */ + 0 7 0x1 0x0>; /* PA7 periph A */ + }; + + pinctrl_usart2_rts: usart2_rts-0 { + atmel,pins = + <1 0 0x2 0x0>; /* PB0 periph B */ + }; + + pinctrl_usart2_cts: usart2_cts-0 { + atmel,pins = + <1 1 0x2 0x0>; /* PB1 periph B */ + }; + }; + + usart3 { + pinctrl_usart3: usart3-0 { + atmel,pins = + <2 23 0x2 0x1 /* PC23 periph B with pullup */ + 2 22 0x2 0x0>; /* PC22 periph B */ + }; + + pinctrl_usart3_rts: usart3_rts-0 { + atmel,pins = + <2 24 0x2 0x0>; /* PC24 periph B */ + }; + + pinctrl_usart3_cts: usart3_cts-0 { + atmel,pins = + <2 25 0x2 0x0>; /* PC25 periph B */ + }; + }; + + uart0 { + pinctrl_uart0: uart0-0 { + atmel,pins = + <2 9 0x3 0x1 /* PC9 periph C with pullup */ + 2 8 0x3 0x0>; /* PC8 periph C */ + }; + }; + + uart1 { + pinctrl_uart1: uart1-0 { + atmel,pins = + <2 16 0x3 0x1 /* PC17 periph C with pullup */ + 2 17 0x3 0x0>; /* PC16 periph C */ + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <3 5 0x0 0x1 /* PD5 gpio RDY pin pull_up*/ + 3 4 0x0 0x1>; /* PD4 gpio enable pin pull_up */ + }; + }; + + mmc0 { + pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { + atmel,pins = + <0 17 0x1 0x0 /* PA17 periph A */ + 0 16 0x1 0x1 /* PA16 periph A with pullup */ + 0 15 0x1 0x1>; /* PA15 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + <0 18 0x1 0x1 /* PA18 periph A with pullup */ + 0 19 0x1 0x1 /* PA19 periph A with pullup */ + 0 20 0x1 0x1>; /* PA20 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 { + atmel,pins = + <0 11 0x2 0x1 /* PA11 periph B with pullup */ + 0 12 0x2 0x1 /* PA12 periph B with pullup */ + 0 13 0x2 0x1 /* PA13 periph B with pullup */ + 0 14 0x2 0x1>; /* PA14 periph B with pullup */ + }; + }; + + pioA: gpio@fffff400 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff600 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff800 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioD: gpio@fffffa00 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; }; dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 4 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; }; @@ -155,6 +300,8 @@ interrupts = <5 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; }; @@ -164,6 +311,8 @@ interrupts = <6 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; }; @@ -173,6 +322,8 @@ interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; }; @@ -182,6 +333,8 @@ interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart3>; status = "disabled"; }; @@ -215,6 +368,8 @@ >; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; gpios = <&pioD 5 0 &pioD 4 0 0 diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 912b2c283d6f..0376bf4fd66b 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -45,6 +45,28 @@ i2c1: i2c@f8014000 { status = "okay"; }; + + mmc0: mmc@f0008000 { + pinctrl-0 = < + &pinctrl_board_mmc0 + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioA 7 0>; + }; + }; + + pinctrl@fffff400 { + mmc0 { + pinctrl_board_mmc0: mmc0-board { + atmel,pins = + <0 7 0x0 0x5>; /* PA7 gpio CD pin pull up and deglitch */ + }; + }; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi new file mode 100644 index 000000000000..54eb33ba6d22 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x25.dtsi @@ -0,0 +1,49 @@ +/* + * at91sam9x25.dtsi - Device Tree Include file for AT91SAM9X25 SoC + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ + +/include/ "at91sam9x5.dtsi" + +/ { + model = "Atmel AT91SAM9X25 SoC"; + compatible = "atmel, at91sam9x25, atmel,at91sam9x5"; + + ahb { + apb { + pinctrl@fffff400 { + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe03fff 0xc000001c /* pioA */ + 0x0007ffff 0x00047e3f 0x00000000 /* pioB */ + 0x80000000 0xfffd0000 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; + + macb1 { + pinctrl_macb1_rmii: macb1_rmii-0 { + atmel,pins = + <2 16 0x2 0x0 /* PC16 periph B */ + 2 18 0x2 0x0 /* PC18 periph B */ + 2 19 0x2 0x0 /* PC19 periph B */ + 2 20 0x2 0x0 /* PC20 periph B */ + 2 21 0x2 0x0 /* PC21 periph B */ + 2 27 0x2 0x0 /* PC27 periph B */ + 2 28 0x2 0x0 /* PC28 periph B */ + 2 29 0x2 0x0 /* PC29 periph B */ + 2 30 0x2 0x0 /* PC30 periph B */ + 2 31 0x2 0x0>; /* PC31 periph B */ + }; + }; + }; + + macb1: ethernet@f8030000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb1_rmii>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts new file mode 100644 index 000000000000..af907eaa1f25 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x25ek.dts @@ -0,0 +1,16 @@ +/* + * at91sam9x25ek.dts - Device Tree file for AT91SAM9X25-EK board + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "at91sam9x25.dtsi" +/include/ "at91sam9x5ek.dtsi" + +/ { + model = "Atmel AT91SAM9G25-EK"; + compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; +}; diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi new file mode 100644 index 000000000000..fb102d6126ce --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x35.dtsi @@ -0,0 +1,28 @@ +/* + * at91sam9x35.dtsi - Device Tree Include file for AT91SAM9X35 SoC + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ + +/include/ "at91sam9x5.dtsi" + +/ { + model = "Atmel AT91SAM9X35 SoC"; + compatible = "atmel, at91sam9x35, atmel,at91sam9x5"; + + ahb { + apb { + pinctrl@fffff400 { + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe03fff 0xc000000c /* pioA */ + 0x000406ff 0x00047e3f 0x00000000 /* pioB */ + 0xfdffffff 0x00000000 0xb83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9x35ek.dts b/arch/arm/boot/dts/at91sam9x35ek.dts new file mode 100644 index 000000000000..5ccb607b5414 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x35ek.dts @@ -0,0 +1,16 @@ +/* + * at91sam9x35ek.dts - Device Tree file for AT91SAM9X35-EK board + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +/include/ "at91sam9x35.dtsi" +/include/ "at91sam9x5ek.dtsi" + +/ { + model = "Atmel AT91SAM9X35-EK"; + compatible = "atmel,at91sam9x35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; +}; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 03fc136421c5..7ee49e8daf98 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -111,50 +111,244 @@ interrupts = <21 4 0>; }; - pioA: gpio@fffff400 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff400 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - }; + pinctrl@fffff400 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; + ranges = <0xfffff400 0xfffff400 0x800>; + + /* shared pinctrl settings */ + dbgu { + pinctrl_dbgu: dbgu-0 { + atmel,pins = + <0 9 0x1 0x0 /* PA9 periph A */ + 0 10 0x1 0x1>; /* PA10 periph A with pullup */ + }; + }; - pioB: gpio@fffff600 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff600 0x100>; - interrupts = <2 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <0 0 0x1 0x1 /* PA0 periph A with pullup */ + 0 1 0x1 0x0>; /* PA1 periph A */ + }; + + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = + <0 2 0x1 0x0>; /* PA2 periph A */ + }; + + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = + <0 3 0x1 0x0>; /* PA3 periph A */ + }; + }; + + usart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <0 5 0x1 0x1 /* PA5 periph A with pullup */ + 0 6 0x1 0x0>; /* PA6 periph A */ + }; + + pinctrl_usart1_rts: usart1_rts-0 { + atmel,pins = + <3 27 0x3 0x0>; /* PC27 periph C */ + }; + + pinctrl_usart1_cts: usart1_cts-0 { + atmel,pins = + <3 28 0x3 0x0>; /* PC28 periph C */ + }; + }; + + usart2 { + pinctrl_usart2: usart2-0 { + atmel,pins = + <0 7 0x1 0x1 /* PA7 periph A with pullup */ + 0 8 0x1 0x0>; /* PA8 periph A */ + }; + + pinctrl_uart2_rts: uart2_rts-0 { + atmel,pins = + <0 0 0x2 0x0>; /* PB0 periph B */ + }; + + pinctrl_uart2_cts: uart2_cts-0 { + atmel,pins = + <0 1 0x2 0x0>; /* PB1 periph B */ + }; + }; + + usart3 { + pinctrl_uart3: usart3-0 { + atmel,pins = + <3 23 0x2 0x1 /* PC22 periph B with pullup */ + 3 23 0x2 0x0>; /* PC23 periph B */ + }; + + pinctrl_usart3_rts: usart3_rts-0 { + atmel,pins = + <3 24 0x2 0x0>; /* PC24 periph B */ + }; + + pinctrl_usart3_cts: usart3_cts-0 { + atmel,pins = + <3 25 0x2 0x0>; /* PC25 periph B */ + }; + }; + + uart0 { + pinctrl_uart0: uart0-0 { + atmel,pins = + <3 8 0x3 0x0 /* PC8 periph C */ + 3 9 0x3 0x1>; /* PC9 periph C with pullup */ + }; + }; + + uart1 { + pinctrl_uart1: uart1-0 { + atmel,pins = + <3 16 0x3 0x0 /* PC16 periph C */ + 3 17 0x3 0x1>; /* PC17 periph C with pullup */ + }; + }; + + nand { + pinctrl_nand: nand-0 { + atmel,pins = + <3 4 0x0 0x1 /* PD5 gpio RDY pin pull_up */ + 3 5 0x0 0x1>; /* PD4 gpio enable pin pull_up */ + }; + }; + + macb0 { + pinctrl_macb0_rmii: macb0_rmii-0 { + atmel,pins = + <1 0 0x1 0x0 /* PB0 periph A */ + 1 1 0x1 0x0 /* PB1 periph A */ + 1 2 0x1 0x0 /* PB2 periph A */ + 1 3 0x1 0x0 /* PB3 periph A */ + 1 4 0x1 0x0 /* PB4 periph A */ + 1 5 0x1 0x0 /* PB5 periph A */ + 1 6 0x1 0x0 /* PB6 periph A */ + 1 7 0x1 0x0 /* PB7 periph A */ + 1 9 0x1 0x0 /* PB9 periph A */ + 1 10 0x1 0x0>; /* PB10 periph A */ + }; + + pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 { + atmel,pins = + <1 8 0x1 0x0 /* PA8 periph A */ + 1 11 0x1 0x0 /* PA11 periph A */ + 1 12 0x1 0x0 /* PA12 periph A */ + 1 13 0x1 0x0 /* PA13 periph A */ + 1 14 0x1 0x0 /* PA14 periph A */ + 1 15 0x1 0x0 /* PA15 periph A */ + 1 16 0x1 0x0 /* PA16 periph A */ + 1 17 0x1 0x0>; /* PA17 periph A */ + }; + }; + + mmc0 { + pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { + atmel,pins = + <0 17 0x1 0x0 /* PA17 periph A */ + 0 16 0x1 0x1 /* PA16 periph A with pullup */ + 0 15 0x1 0x1>; /* PA15 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + <0 18 0x1 0x1 /* PA18 periph A with pullup */ + 0 19 0x1 0x1 /* PA19 periph A with pullup */ + 0 20 0x1 0x1>; /* PA20 periph A with pullup */ + }; + }; + + mmc1 { + pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 { + atmel,pins = + <0 13 0x2 0x0 /* PA13 periph B */ + 0 12 0x2 0x1 /* PA12 periph B with pullup */ + 0 11 0x2 0x1>; /* PA11 periph B with pullup */ + }; + + pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { + atmel,pins = + <0 2 0x2 0x1 /* PA2 periph B with pullup */ + 0 3 0x2 0x1 /* PA3 periph B with pullup */ + 0 4 0x2 0x1>; /* PA4 periph B with pullup */ + }; + }; + + pioA: gpio@fffff400 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff400 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioB: gpio@fffff600 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff600 0x200>; + interrupts = <2 4 1>; + #gpio-cells = <2>; + gpio-controller; + #gpio-lines = <19>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioC: gpio@fffff800 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffff800 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pioD: gpio@fffffa00 { + compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; + reg = <0xfffffa00 0x200>; + interrupts = <3 4 1>; + #gpio-cells = <2>; + gpio-controller; + #gpio-lines = <22>; + interrupt-controller; + #interrupt-cells = <2>; + }; }; - pioC: gpio@fffff800 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffff800 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + mmc0: mmc@f0008000 { + compatible = "atmel,hsmci"; + reg = <0xf0008000 0x600>; + interrupts = <12 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; - pioD: gpio@fffffa00 { - compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; - reg = <0xfffffa00 0x100>; - interrupts = <3 4 1>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; + mmc1: mmc@f000c000 { + compatible = "atmel,hsmci"; + reg = <0xf000c000 0x600>; + interrupts = <26 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; interrupts = <1 4 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dbgu>; status = "disabled"; }; @@ -164,6 +358,8 @@ interrupts = <5 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0>; status = "disabled"; }; @@ -173,6 +369,8 @@ interrupts = <6 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1>; status = "disabled"; }; @@ -182,6 +380,8 @@ interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart2>; status = "disabled"; }; @@ -189,6 +389,8 @@ compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf802c000 0x100>; interrupts = <24 4 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_rmii>; status = "disabled"; }; @@ -273,6 +475,8 @@ >; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; gpios = <&pioD 5 0 &pioD 4 0 0 diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi new file mode 100644 index 000000000000..8a7cf1d9cf5d --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -0,0 +1,101 @@ +/* + * at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board + * + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/include/ "at91sam9x5cm.dtsi" + +/ { + model = "Atmel AT91SAM9X5-EK"; + compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; + + chosen { + bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; + }; + + ahb { + apb { + mmc0: mmc@f0008000 { + pinctrl-0 = < + &pinctrl_board_mmc0 + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 15 0>; + }; + }; + + mmc1: mmc@f000c000 { + pinctrl-0 = < + &pinctrl_board_mmc1 + &pinctrl_mmc1_slot0_clk_cmd_dat0 + &pinctrl_mmc1_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 14 0>; + }; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + usart0: serial@f801c000 { + status = "okay"; + }; + + macb0: ethernet@f802c000 { + phy-mode = "rmii"; + status = "okay"; + }; + + i2c0: i2c@f8010000 { + status = "okay"; + }; + + i2c1: i2c@f8014000 { + status = "okay"; + }; + + i2c2: i2c@f8018000 { + status = "okay"; + }; + + pinctrl@fffff400 { + mmc0 { + pinctrl_board_mmc0: mmc0-board { + atmel,pins = + <3 15 0x0 0x5>; /* PD15 gpio CD pin pull up and deglitch */ + }; + }; + + mmc1 { + pinctrl_board_mmc1: mmc1-board { + atmel,pins = + <3 14 0x0 0x5>; /* PD14 gpio CD pin pull up and deglitch */ + }; + }; + }; + }; + + usb0: ohci@00600000 { + status = "okay"; + num-ports = <2>; + atmel,vbus-gpio = <&pioD 19 1 + &pioD 20 1 + >; + }; + + usb1: ehci@00700000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 748ba7aa746c..4b0e0ca08f40 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -483,6 +483,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80004000 0x1000>; interrupts = <0 21 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -494,6 +496,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80122000 0x1000>; interrupts = <0 22 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -505,6 +509,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80128000 0x1000>; interrupts = <0 55 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -516,6 +522,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80110000 0x1000>; interrupts = <0 12 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -527,6 +535,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x8012a000 0x1000>; interrupts = <0 51 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -573,33 +583,38 @@ interrupts = <0 60 0x4>; status = "disabled"; }; + sdi@80118000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80118000 0x1000>; interrupts = <0 50 0x4>; status = "disabled"; }; + sdi@80005000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80005000 0x1000>; interrupts = <0 41 0x4>; status = "disabled"; }; + sdi@80119000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80119000 0x1000>; interrupts = <0 59 0x4>; status = "disabled"; }; + sdi@80114000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80114000 0x1000>; interrupts = <0 99 0x4>; status = "disabled"; }; + sdi@80008000 { compatible = "arm,pl18x", "arm,primecell"; - reg = <0x80114000 0x1000>; + reg = <0x80008000 0x1000>; interrupts = <0 100 0x4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 96fb824b5e6e..5a00022383e7 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -4,21 +4,32 @@ compatible = "marvell,dove"; model = "Marvell Armada 88AP510 SoC"; - interrupt-parent = <&intc>; - - intc: interrupt-controller { - compatible = "marvell,orion-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0xf1020204 0x04>, - <0xf1020214 0x04>; - }; - - mbus@f1000000 { + soc@f1000000 { compatible = "simple-bus"; - ranges = <0 0xf1000000 0x4000000>; #address-cells = <1>; #size-cells = <1>; + interrupt-parent = <&intc>; + + ranges = <0xc8000000 0xc8000000 0x0100000 /* CESA SRAM 1M */ + 0xe0000000 0xe0000000 0x8000000 /* PCIe0 Mem 128M */ + 0xe8000000 0xe8000000 0x8000000 /* PCIe1 Mem 128M */ + 0xf0000000 0xf0000000 0x0100000 /* ScratchPad 1M */ + 0x00000000 0xf1000000 0x1000000 /* SB/NB regs 16M */ + 0xf2000000 0xf2000000 0x0100000 /* PCIe0 I/O 1M */ + 0xf2100000 0xf2100000 0x0100000 /* PCIe0 I/O 1M */ + 0xf8000000 0xf8000000 0x8000000>; /* BootROM 128M */ + + l2: l2-cache { + compatible = "marvell,tauros2-cache"; + marvell,tauros2-cache-features = <0>; + }; + + intc: interrupt-controller { + compatible = "marvell,orion-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20204 0x04>, <0x20214 0x04>; + }; uart0: serial@12000 { compatible = "ns16550a"; @@ -56,11 +67,6 @@ status = "disabled"; }; - wdt: wdt@20300 { - compatible = "marvell,orion-wdt"; - reg = <0x20300 0x28>; - }; - gpio0: gpio@d0400 { compatible = "marvell,orion-gpio"; #gpio-cells = <2>; @@ -139,5 +145,14 @@ nr-ports = <1>; status = "disabled"; }; + + crypto: crypto@30000 { + compatible = "marvell,orion-crypto"; + reg = <0x30000 0x10000>, + <0xc8000000 0x800>; + reg-names = "regs", "sram"; + interrupts = <31>; + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 73567b843e72..a21511c14071 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -20,8 +20,10 @@ compatible = "samsung,trats", "samsung,exynos4210"; memory { - reg = <0x40000000 0x20000000 - 0x60000000 0x20000000>; + reg = <0x40000000 0x10000000 + 0x50000000 0x10000000 + 0x60000000 0x10000000 + 0x70000000 0x10000000>; }; chosen { diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 9ca4ca70c1bc..6d31aa383460 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -69,6 +69,7 @@ interrupts = <13>, <56>; interrupt-names = "gpmi-dma", "bch"; clocks = <&clks 34>; + clock-names = "gpmi_io"; fsl,gpmi-dma-channel = <4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index e16d63155480..55c57ea6169e 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -85,6 +85,7 @@ interrupts = <88>, <41>; interrupt-names = "gpmi-dma", "bch"; clocks = <&clks 50>; + clock-names = "gpmi_io"; fsl,gpmi-dma-channel = <4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index 15df4c105e89..5bfa02a3f85c 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -37,6 +37,13 @@ pinctrl_hog: hoggrp { fsl,pins = < 176 0x80000000 /* MX6Q_PAD_EIM_D25__GPIO_3_25 */ + >; + }; + }; + + arm2 { + pinctrl_usdhc3_arm2: usdhc3grp-arm2 { + fsl,pins = < 1363 0x80000000 /* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */ 1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */ >; @@ -58,7 +65,8 @@ wp-gpios = <&gpio6 14 0>; vmmc-supply = <®_3p3v>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3_1>; + pinctrl-0 = <&pinctrl_usdhc3_1 + &pinctrl_usdhc3_arm2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 8ac51c08269d..8fea375c734d 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -48,17 +48,19 @@ #size-cells = <0>; button@1 { label = "Function Button"; - linux,code = <132>; + linux,code = <357>; gpios = <&gpio1 9 1>; }; button@2 { label = "Power-on Switch"; - linux,code = <116>; + linux,code = <0>; + linux,input-type = <5>; gpios = <&gpio1 10 1>; }; button@3 { label = "Power-auto Switch"; - linux,code = <142>; + linux,code = <1>; + linux,input-type = <5>; gpios = <&gpio1 11 1>; }; }; @@ -67,28 +69,28 @@ compatible = "gpio-leds"; led@1 { - label = "lschlv2:blue:func"; + label = "lsxl:blue:func"; gpios = <&gpio1 4 1>; }; led@2 { - label = "lschlv2:red:alarm"; + label = "lsxl:red:alarm"; gpios = <&gpio1 5 1>; }; led@3 { - label = "lschlv2:amber:info"; + label = "lsxl:amber:info"; gpios = <&gpio1 6 1>; }; led@4 { - label = "lschlv2:blue:power"; + label = "lsxl:blue:power"; gpios = <&gpio1 7 1>; linux,default-trigger = "default-on"; }; led@5 { - label = "lschlv2:red:func"; + label = "lsxl:red:func"; gpios = <&gpio1 16 1>; }; }; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index f38ea8771b44..696e929d0304 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -257,7 +257,7 @@ interrupt-names = "common", "tx", "rx", "sidetone"; interrupt-parent = <&intc>; ti,buffer-size = <1280>; - ti,hwmods = "mcbsp2"; + ti,hwmods = "mcbsp2", "mcbsp2_sidetone"; }; mcbsp3: mcbsp@49024000 { @@ -272,7 +272,7 @@ interrupt-names = "common", "tx", "rx", "sidetone"; interrupt-parent = <&intc>; ti,buffer-size = <128>; - ti,hwmods = "mcbsp3"; + ti,hwmods = "mcbsp3", "mcbsp3_sidetone"; }; mcbsp4: mcbsp@49026000 { diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts new file mode 100644 index 000000000000..387fedb58988 --- /dev/null +++ b/arch/arm/boot/dts/pm9g45.dts @@ -0,0 +1,165 @@ +/* + * pm9g45.dts - Device Tree file for Ronetix pm9g45 board + * + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Licensed under GPLv2. + */ +/dts-v1/; +/include/ "at91sam9g45.dtsi" + +/ { + model = "Ronetix pm9g45"; + compatible = "ronetix,pm9g45", "atmel,at91sam9g45", "atmel,at91sam9"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x70000000 0x8000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + dbgu: serial@ffffee00 { + status = "okay"; + }; + + pinctrl@fffff200 { + + board { + pinctrl_board_nand: nand0-board { + atmel,pins = + <3 3 0x0 0x1 /* PD3 gpio RDY pin pull_up*/ + 2 14 0x0 0x1>; /* PC14 gpio enable pin pull_up */ + }; + }; + + mmc { + pinctrl_board_mmc: mmc0-board { + atmel,pins = + <3 6 0x0 0x5>; /* PD6 gpio CD pin pull_up and deglitch */ + }; + }; + }; + + mmc0: mmc@fff80000 { + pinctrl-0 = < + &pinctrl_board_mmc + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 6 0>; + }; + }; + + macb0: ethernet@fffbc000 { + phy-mode = "rmii"; + status = "okay"; + }; + + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + pinctrl-0 = <&pinctrl_board_nand>; + + gpios = <&pioD 3 0 + &pioC 14 0 + 0 + >; + + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x20000>; + }; + + barebox@20000 { + label = "barebox"; + reg = <0x20000 0x40000>; + }; + + bareboxenv@60000 { + label = "bareboxenv"; + reg = <0x60000 0x1A0000>; + }; + + kernel@200000 { + label = "bareboxenv2"; + reg = <0x200000 0x300000>; + }; + + kernel@500000 { + label = "root"; + reg = <0x500000 0x400000>; + }; + + data@900000 { + label = "data"; + reg = <0x900000 0x8340000>; + }; + }; + + usb0: ohci@00700000 { + status = "okay"; + num-ports = <2>; + }; + + usb1: ehci@00800000 { + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + + led0 { + label = "led0"; + gpios = <&pioD 0 1>; + linux,default-trigger = "nand-disk"; + }; + + led1 { + label = "led1"; + gpios = <&pioD 31 0>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + right { + label = "SW4"; + gpios = <&pioE 7 1>; + linux,code = <106>; + }; + + up { + label = "SW3"; + gpios = <&pioE 8 1>; + linux,code = <103>; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index dd4358bc26e2..2e4c5727468e 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -181,6 +181,10 @@ status = "okay"; }; + gpio@d8400000 { + status = "okay"; + }; + i2c0: i2c@e0280000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi index 419ea7413d23..7cd25eb4f8e0 100644 --- a/arch/arm/boot/dts/spear1310.dtsi +++ b/arch/arm/boot/dts/spear1310.dtsi @@ -70,6 +70,12 @@ status = "disabled"; }; + pinmux: pinmux@e0700000 { + compatible = "st,spear1310-pinmux"; + reg = <0xe0700000 0x1000>; + #gpio-range-cells = <2>; + }; + spi1: spi@5d400000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x5d400000 0x1000>; @@ -179,6 +185,27 @@ thermal@e07008c4 { st,thermal-flags = <0x7000>; }; + + gpiopinctrl: gpio@d8400000 { + compatible = "st,spear-plgpio"; + reg = <0xd8400000 0x1000>; + interrupts = <0 100 0x4>; + #interrupt-cells = <1>; + interrupt-controller; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinmux 0 246>; + status = "disabled"; + + st-plgpio,ngpio = <246>; + st-plgpio,enb-reg = <0xd0>; + st-plgpio,wdata-reg = <0x90>; + st-plgpio,dir-reg = <0xb0>; + st-plgpio,ie-reg = <0x30>; + st-plgpio,rdata-reg = <0x70>; + st-plgpio,mis-reg = <0x10>; + st-plgpio,eit-reg = <0x50>; + }; }; }; }; diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index c9a54e06fb68..045f7123ffac 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -193,6 +193,10 @@ status = "okay"; }; + gpio@e2800000 { + status = "okay"; + }; + i2c0: i2c@e0280000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index d71fe2a68f09..6c09eb0a1b2b 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -24,6 +24,12 @@ status = "disabled"; }; + pinmux: pinmux@e0700000 { + compatible = "st,spear1340-pinmux"; + reg = <0xe0700000 0x1000>; + #gpio-range-cells = <2>; + }; + spi1: spi@5d400000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x5d400000 0x1000>; @@ -51,6 +57,26 @@ thermal@e07008c4 { st,thermal-flags = <0x2a00>; }; + + gpiopinctrl: gpio@e2800000 { + compatible = "st,spear-plgpio"; + reg = <0xe2800000 0x1000>; + interrupts = <0 107 0x4>; + #interrupt-cells = <1>; + interrupt-controller; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinmux 0 252>; + status = "disabled"; + + st-plgpio,ngpio = <250>; + st-plgpio,wdata-reg = <0x40>; + st-plgpio,dir-reg = <0x00>; + st-plgpio,ie-reg = <0x80>; + st-plgpio,rdata-reg = <0x20>; + st-plgpio,mis-reg = <0xa0>; + st-plgpio,eit-reg = <0x60>; + }; }; }; }; diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi index 62fc4fb3e5f9..930303e48df9 100644 --- a/arch/arm/boot/dts/spear310.dtsi +++ b/arch/arm/boot/dts/spear310.dtsi @@ -22,9 +22,10 @@ 0xb0000000 0xb0000000 0x10000000 0xd0000000 0xd0000000 0x30000000>; - pinmux@b4000000 { + pinmux: pinmux@b4000000 { compatible = "st,spear310-pinmux"; reg = <0xb4000000 0x1000>; + #gpio-range-cells = <2>; }; fsmc: flash@44000000 { @@ -75,6 +76,25 @@ reg = <0xb2200000 0x1000>; status = "disabled"; }; + + gpiopinctrl: gpio@b4000000 { + compatible = "st,spear-plgpio"; + reg = <0xb4000000 0x1000>; + #interrupt-cells = <1>; + interrupt-controller; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinmux 0 102>; + status = "disabled"; + + st-plgpio,ngpio = <102>; + st-plgpio,enb-reg = <0x10>; + st-plgpio,wdata-reg = <0x20>; + st-plgpio,dir-reg = <0x30>; + st-plgpio,ie-reg = <0x50>; + st-plgpio,rdata-reg = <0x40>; + st-plgpio,mis-reg = <0x60>; + }; }; }; }; diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts index 082328bd64ab..ad4bfc68ee05 100644 --- a/arch/arm/boot/dts/spear320-evb.dts +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -164,6 +164,10 @@ status = "okay"; }; + gpio@b3000000 { + status = "okay"; + }; + i2c0: i2c@d0180000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi index 1f49d69595a0..67d7ada71275 100644 --- a/arch/arm/boot/dts/spear320.dtsi +++ b/arch/arm/boot/dts/spear320.dtsi @@ -21,9 +21,10 @@ ranges = <0x40000000 0x40000000 0x80000000 0xd0000000 0xd0000000 0x30000000>; - pinmux@b3000000 { + pinmux: pinmux@b3000000 { compatible = "st,spear320-pinmux"; reg = <0xb3000000 0x1000>; + #gpio-range-cells = <2>; }; clcd@90000000 { @@ -90,6 +91,26 @@ reg = <0xa4000000 0x1000>; status = "disabled"; }; + + gpiopinctrl: gpio@b3000000 { + compatible = "st,spear-plgpio"; + reg = <0xb3000000 0x1000>; + #interrupt-cells = <1>; + interrupt-controller; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinmux 0 102>; + status = "disabled"; + + st-plgpio,ngpio = <102>; + st-plgpio,enb-reg = <0x24>; + st-plgpio,wdata-reg = <0x34>; + st-plgpio,dir-reg = <0x44>; + st-plgpio,ie-reg = <0x64>; + st-plgpio,rdata-reg = <0x54>; + st-plgpio,mis-reg = <0x84>; + st-plgpio,eit-reg = <0x94>; + }; }; }; }; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index f0ba901676ac..a20d4ff3fb3c 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -523,12 +523,12 @@ }; temperature-sensor@4c { - compatible = "nct1008"; + compatible = "onnn,nct1008"; reg = <0x4c>; }; magnetometer@c { - compatible = "ak8975"; + compatible = "ak,ak8975"; reg = <0xc>; interrupt-parent = <&gpio>; interrupts = <109 0x04>; /* gpio PN5 */ diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index b1497c7d7d68..df7f2270fc91 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -73,8 +73,8 @@ pinmux: pinmux { compatible = "nvidia,tegra30-pinmux"; - reg = <0x70000868 0xd0 /* Pad control registers */ - 0x70003000 0x3e0>; /* Mux registers */ + reg = <0x70000868 0xd4 /* Pad control registers */ + 0x70003000 0x3e4>; /* Mux registers */ }; serial@70006000 { diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi index b459691655ab..330f833ac3b0 100644 --- a/arch/arm/boot/dts/wm8505.dtsi +++ b/arch/arm/boot/dts/wm8505.dtsi @@ -71,13 +71,13 @@ ehci@d8007100 { compatible = "via,vt8500-ehci"; reg = <0xd8007100 0x200>; - interrupts = <43>; + interrupts = <1>; }; uhci@d8007300 { compatible = "platform-uhci"; reg = <0xd8007300 0x200>; - interrupts = <43>; + interrupts = <0>; }; fb@d8050800 { diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c index df13a3ffff35..9d2d3ba339ff 100644 --- a/arch/arm/common/timer-sp.c +++ b/arch/arm/common/timer-sp.c @@ -162,7 +162,6 @@ static struct clock_event_device sp804_clockevent = { .set_mode = sp804_set_mode, .set_next_event = sp804_set_next_event, .rating = 300, - .cpumask = cpu_all_mask, }; static struct irqaction sp804_timer_irq = { @@ -185,6 +184,7 @@ void __init sp804_clockevents_init(void __iomem *base, unsigned int irq, clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ); evt->name = name; evt->irq = irq; + evt->cpumask = cpu_possible_mask; setup_irq(irq, &sp804_timer_irq); clockevents_config_and_register(evt, rate, 0xf, 0xffffffff); diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index 67bc571ed0c3..b175577d7abb 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -111,6 +111,7 @@ CONFIG_I2C=y CONFIG_I2C_GPIO=y CONFIG_SPI=y CONFIG_SPI_ATMEL=y +CONFIG_PINCTRL_AT91=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_AT91SAM9X_WATCHDOG=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 66aa7a6db884..394ded624e37 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -139,6 +139,7 @@ CONFIG_I2C_IMX=y CONFIG_SPI=y CONFIG_SPI_IMX=y CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_MC9S08DZ60=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_IMX2_WDT=y @@ -155,6 +156,7 @@ CONFIG_SOC_CAMERA=y CONFIG_SOC_CAMERA_OV2640=y CONFIG_VIDEO_MX3=y CONFIG_FB=y +CONFIG_LCD_PLATFORM=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_L4F00242T03=y diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig index 7bcf850eddcd..3458752c4bb2 100644 --- a/arch/arm/configs/mvebu_defconfig +++ b/arch/arm/configs/mvebu_defconfig @@ -1,6 +1,6 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y +CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y @@ -9,10 +9,12 @@ CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_MVEBU=y -CONFIG_MACH_ARMADA_370_XP=y +CONFIG_MACH_ARMADA_370=y +CONFIG_MACH_ARMADA_XP=y +# CONFIG_CACHE_L2X0 is not set CONFIG_AEABI=y CONFIG_HIGHMEM=y -CONFIG_USE_OF=y +# CONFIG_COMPACTION is not set CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y @@ -23,6 +25,8 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y +# CONFIG_USB_SUPPORT is not set +# CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig index cdd4d2bd3962..2ba9e63d0f17 100644 --- a/arch/arm/configs/versatile_defconfig +++ b/arch/arm/configs/versatile_defconfig @@ -1,3 +1,4 @@ +CONFIG_ARCH_VERSATILE=y CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y diff --git a/arch/arm/include/asm/flat.h b/arch/arm/include/asm/flat.h index 59426a4595c9..e847d23351ed 100644 --- a/arch/arm/include/asm/flat.h +++ b/arch/arm/include/asm/flat.h @@ -8,7 +8,7 @@ #define flat_argvp_envp_on_stack() 1 #define flat_old_ram_flag(flags) (flags) #define flat_reloc_valid(reloc, size) ((reloc) <= (size)) -#define flat_get_addr_from_rp(rp, relval, flags, persistent) get_unaligned(rp) +#define flat_get_addr_from_rp(rp, relval, flags, persistent) ((void)persistent,get_unaligned(rp)) #define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp) #define flat_get_relocate_addr(rel) (rel) #define flat_set_persistent(relval, p) 0 diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h index 6b9b077d86b3..afd7e916472f 100644 --- a/arch/arm/include/asm/hardware/sp810.h +++ b/arch/arm/include/asm/hardware/sp810.h @@ -56,6 +56,8 @@ #define SCCTRL_TIMEREN1SEL_REFCLK (0 << 17) #define SCCTRL_TIMEREN1SEL_TIMCLK (1 << 17) +#define SCCTRL_TIMERENnSEL_SHIFT(n) (15 + ((n) * 2)) + static inline void sysctl_soft_reset(void __iomem *base) { /* switch to slow mode */ diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 35c1ed89b936..42f042ee4ada 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -64,7 +64,7 @@ extern void __raw_readsl(const void __iomem *addr, void *data, int longlen); static inline void __raw_writew(u16 val, volatile void __iomem *addr) { asm volatile("strh %1, %0" - : "+Qo" (*(volatile u16 __force *)addr) + : "+Q" (*(volatile u16 __force *)addr) : "r" (val)); } @@ -72,7 +72,7 @@ static inline u16 __raw_readw(const volatile void __iomem *addr) { u16 val; asm volatile("ldrh %1, %0" - : "+Qo" (*(volatile u16 __force *)addr), + : "+Q" (*(volatile u16 __force *)addr), "=r" (val)); return val; } diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h index aeae9c609df4..6d65ba222db9 100644 --- a/arch/arm/include/asm/prom.h +++ b/arch/arm/include/asm/prom.h @@ -11,6 +11,8 @@ #ifndef __ASMARM_PROM_H #define __ASMARM_PROM_H +#define HAVE_ARCH_DEVTREE_FIXUPS + #ifdef CONFIG_OF extern struct machine_desc *setup_machine_fdt(unsigned int dt_phys); diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h index 05b8e82ec9f5..e3f757263438 100644 --- a/arch/arm/include/asm/sched_clock.h +++ b/arch/arm/include/asm/sched_clock.h @@ -10,7 +10,5 @@ extern void sched_clock_postinit(void); extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate); -extern void setup_sched_clock_needs_suspend(u32 (*read)(void), int bits, - unsigned long rate); #endif diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 77bd79f2ffdb..7e1f76027f66 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -200,8 +200,8 @@ extern int __put_user_8(void *, unsigned long long); #define USER_DS KERNEL_DS #define segment_eq(a,b) (1) -#define __addr_ok(addr) (1) -#define __range_ok(addr,size) (0) +#define __addr_ok(addr) ((void)(addr),1) +#define __range_ok(addr,size) ((void)(addr),0) #define get_fs() (KERNEL_DS) static inline void set_fs(mm_segment_t fs) diff --git a/arch/arm/include/asm/vfpmacros.h b/arch/arm/include/asm/vfpmacros.h index 6a6f1e485f41..301c1db3e99b 100644 --- a/arch/arm/include/asm/vfpmacros.h +++ b/arch/arm/include/asm/vfpmacros.h @@ -27,9 +27,9 @@ #if __LINUX_ARM_ARCH__ <= 6 ldr \tmp, =elf_hwcap @ may not have MVFR regs ldr \tmp, [\tmp, #0] - tst \tmp, #HWCAP_VFPv3D16 - ldceql p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31} - addne \base, \base, #32*4 @ step over unused register space + tst \tmp, #HWCAP_VFPD32 + ldcnel p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31} + addeq \base, \base, #32*4 @ step over unused register space #else VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field @@ -51,9 +51,9 @@ #if __LINUX_ARM_ARCH__ <= 6 ldr \tmp, =elf_hwcap @ may not have MVFR regs ldr \tmp, [\tmp, #0] - tst \tmp, #HWCAP_VFPv3D16 - stceql p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31} - addne \base, \base, #32*4 @ step over unused register space + tst \tmp, #HWCAP_VFPD32 + stcnel p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31} + addeq \base, \base, #32*4 @ step over unused register space #else VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field diff --git a/arch/arm/include/asm/xen/interface.h b/arch/arm/include/asm/xen/interface.h index ae05e56dd17d..5000397134b4 100644 --- a/arch/arm/include/asm/xen/interface.h +++ b/arch/arm/include/asm/xen/interface.h @@ -29,16 +29,22 @@ #ifndef __ASSEMBLY__ /* Explicitly size integers that represent pfns in the interface with - * Xen so that we can have one ABI that works for 32 and 64 bit guests. */ + * Xen so that we can have one ABI that works for 32 and 64 bit guests. + * Note that this means that the xen_pfn_t type may be capable of + * representing pfn's which the guest cannot represent in its own pfn + * type. However since pfn space is controlled by the guest this is + * fine since it simply wouldn't be able to create any sure pfns in + * the first place. + */ typedef uint64_t xen_pfn_t; +#define PRI_xen_pfn "llx" typedef uint64_t xen_ulong_t; +#define PRI_xen_ulong "llx" /* Guest handles for primitive C types. */ __DEFINE_GUEST_HANDLE(uchar, unsigned char); __DEFINE_GUEST_HANDLE(uint, unsigned int); -__DEFINE_GUEST_HANDLE(ulong, unsigned long); DEFINE_GUEST_HANDLE(char); DEFINE_GUEST_HANDLE(int); -DEFINE_GUEST_HANDLE(long); DEFINE_GUEST_HANDLE(void); DEFINE_GUEST_HANDLE(uint64_t); DEFINE_GUEST_HANDLE(uint32_t); diff --git a/arch/arm/include/asm/xen/page.h b/arch/arm/include/asm/xen/page.h index 174202318dff..c6b9096cef95 100644 --- a/arch/arm/include/asm/xen/page.h +++ b/arch/arm/include/asm/xen/page.h @@ -10,7 +10,7 @@ #include <xen/interface/grant_table.h> #define pfn_to_mfn(pfn) (pfn) -#define phys_to_machine_mapping_valid (1) +#define phys_to_machine_mapping_valid(pfn) (1) #define mfn_to_pfn(mfn) (mfn) #define mfn_to_virt(m) (__va(mfn_to_pfn(m) << PAGE_SHIFT)) @@ -30,6 +30,8 @@ typedef struct xpaddr { #define XMADDR(x) ((xmaddr_t) { .maddr = (x) }) #define XPADDR(x) ((xpaddr_t) { .paddr = (x) }) +#define INVALID_P2M_ENTRY (~0UL) + static inline xmaddr_t phys_to_machine(xpaddr_t phys) { unsigned offset = phys.paddr & ~PAGE_MASK; @@ -74,9 +76,14 @@ static inline int m2p_remove_override(struct page *page, bool clear_pte) return 0; } +static inline bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn) +{ + BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY); + return true; +} + static inline bool set_phys_to_machine(unsigned long pfn, unsigned long mfn) { - BUG(); - return false; + return __set_phys_to_machine(pfn, mfn); } #endif /* _ASM_ARM_XEN_PAGE_H */ diff --git a/arch/arm/include/debug/8250_32.S b/arch/arm/include/debug/8250_32.S new file mode 100644 index 000000000000..8db01eeabbb4 --- /dev/null +++ b/arch/arm/include/debug/8250_32.S @@ -0,0 +1,27 @@ +/* + * Copyright (c) 2011 Picochip Ltd., Jamie Iles + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit + * accesses to the 8250. + */ + +#include <linux/serial_reg.h> + + .macro senduart,rd,rx + str \rd, [\rx, #UART_TX << UART_SHIFT] + .endm + + .macro busyuart,rd,rx +1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT] + and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE + teq \rd, #UART_LSR_TEMT | UART_LSR_THRE + bne 1002b + .endm + + /* The UART's don't have any flow control IO's wired up. */ + .macro waituart,rd,rx + .endm diff --git a/arch/arm/include/debug/picoxcell.S b/arch/arm/include/debug/picoxcell.S index 7419deb1b948..bc1f07c49cd4 100644 --- a/arch/arm/include/debug/picoxcell.S +++ b/arch/arm/include/debug/picoxcell.S @@ -5,10 +5,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit - * accesses to the 8250. */ -#include <linux/serial_reg.h> #define UART_SHIFT 2 #define PICOXCELL_UART1_BASE 0x80230000 @@ -19,17 +16,4 @@ ldr \rp, =PICOXCELL_UART1_BASE .endm - .macro senduart,rd,rx - str \rd, [\rx, #UART_TX << UART_SHIFT] - .endm - - .macro busyuart,rd,rx -1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT] - and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE - teq \rd, #UART_LSR_TEMT | UART_LSR_THRE - bne 1002b - .endm - - /* The UART's don't have any flow control IO's wired up. */ - .macro waituart,rd,rx - .endm +#include "8250_32.S" diff --git a/arch/arm/include/debug/socfpga.S b/arch/arm/include/debug/socfpga.S index d6f26d23374f..966b2f994946 100644 --- a/arch/arm/include/debug/socfpga.S +++ b/arch/arm/include/debug/socfpga.S @@ -7,6 +7,9 @@ * published by the Free Software Foundation. */ +#define UART_SHIFT 2 +#define DEBUG_LL_UART_OFFSET 0x00002000 + .macro addruart, rp, rv, tmp mov \rp, #DEBUG_LL_UART_OFFSET orr \rp, \rp, #0x00c00000 @@ -14,3 +17,5 @@ orr \rp, \rp, #0xff000000 @ physical base .endm +#include "8250_32.S" + diff --git a/arch/arm/include/uapi/asm/hwcap.h b/arch/arm/include/uapi/asm/hwcap.h index f254f6503cce..3688fd15a32d 100644 --- a/arch/arm/include/uapi/asm/hwcap.h +++ b/arch/arm/include/uapi/asm/hwcap.h @@ -18,11 +18,12 @@ #define HWCAP_THUMBEE (1 << 11) #define HWCAP_NEON (1 << 12) #define HWCAP_VFPv3 (1 << 13) -#define HWCAP_VFPv3D16 (1 << 14) +#define HWCAP_VFPv3D16 (1 << 14) /* also set for VFPv4-D16 */ #define HWCAP_TLS (1 << 15) #define HWCAP_VFPv4 (1 << 16) #define HWCAP_IDIVA (1 << 17) #define HWCAP_IDIVT (1 << 18) +#define HWCAP_VFPD32 (1 << 19) /* set if VFP has 32 regs (not 16) */ #define HWCAP_IDIV (HWCAP_IDIVA | HWCAP_IDIVT) diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 417bac1846bd..34711757ba59 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -88,9 +88,9 @@ ENTRY(ret_from_fork) bl schedule_tail cmp r5, #0 movne r0, r4 - movne lr, pc + adrne lr, BSYM(1f) movne pc, r5 - get_thread_info tsk +1: get_thread_info tsk b ret_slow_syscall ENDPROC(ret_from_fork) diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 16cedb42c0c3..896165096d6a 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -34,6 +34,7 @@ #include <linux/list.h> #include <linux/kallsyms.h> #include <linux/proc_fs.h> +#include <linux/export.h> #include <asm/exception.h> #include <asm/mach/arch.h> @@ -109,6 +110,7 @@ void set_irq_flags(unsigned int irq, unsigned int iflags) /* Order is clear bits in "clr" then set bits in "set" */ irq_modify_status(irq, clr, set & ~clr); } +EXPORT_SYMBOL_GPL(set_irq_flags); void __init init_IRQ(void) { diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c index 38c1a3b103a0..839312905067 100644 --- a/arch/arm/kernel/kprobes-test-arm.c +++ b/arch/arm/kernel/kprobes-test-arm.c @@ -366,7 +366,9 @@ void kprobe_arm_test_cases(void) TEST_UNSUPPORTED(".word 0xe04f0392 @ umaal r0, pc, r2, r3") TEST_UNSUPPORTED(".word 0xe0500090 @ undef") TEST_UNSUPPORTED(".word 0xe05fff9f @ undef") +#endif +#if __LINUX_ARM_ARCH__ >= 7 TEST_RRR( "mls r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") TEST_RRR( "mlshi r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") TEST_RR( "mls lr, r",1, VAL2,", r",2, VAL3,", r13") @@ -456,6 +458,8 @@ void kprobe_arm_test_cases(void) TEST_UNSUPPORTED(".word 0xe1700090") /* Unallocated space */ #if __LINUX_ARM_ARCH__ >= 6 TEST_UNSUPPORTED("ldrex r2, [sp]") +#endif +#if (__LINUX_ARM_ARCH__ >= 7) || defined(CONFIG_CPU_32v6K) TEST_UNSUPPORTED("strexd r0, r2, r3, [sp]") TEST_UNSUPPORTED("ldrexd r2, r3, [sp]") TEST_UNSUPPORTED("strexb r0, r2, [sp]") diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index e29c3337ca81..8ef8c9337809 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -45,10 +45,9 @@ int machine_kexec_prepare(struct kimage *image) for (i = 0; i < image->nr_segments; i++) { current_segment = &image->segment[i]; - err = memblock_is_region_memory(current_segment->mem, - current_segment->memsz); - if (err) - return - EINVAL; + if (!memblock_is_region_memory(current_segment->mem, + current_segment->memsz)) + return -EINVAL; err = get_user(header, (__be32*)current_segment->buf); if (err) diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 93971b1a4f0b..53c0304b734a 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -96,6 +96,10 @@ armpmu_event_set_period(struct perf_event *event, s64 period = hwc->sample_period; int ret = 0; + /* The period may have been changed by PERF_EVENT_IOC_PERIOD */ + if (unlikely(period != hwc->last_period)) + left = period - (hwc->last_period - left); + if (unlikely(left <= -period)) { left = period; local64_set(&hwc->period_left, left); diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c index e21bac20d90d..fc6692e2b603 100644 --- a/arch/arm/kernel/sched_clock.c +++ b/arch/arm/kernel/sched_clock.c @@ -107,13 +107,6 @@ static void sched_clock_poll(unsigned long wrap_ticks) update_sched_clock(); } -void __init setup_sched_clock_needs_suspend(u32 (*read)(void), int bits, - unsigned long rate) -{ - setup_sched_clock(read, bits, rate); - cd.needs_suspend = true; -} - void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate) { unsigned long r, w; @@ -189,18 +182,15 @@ void __init sched_clock_postinit(void) static int sched_clock_suspend(void) { sched_clock_poll(sched_clock_timer.data); - if (cd.needs_suspend) - cd.suspended = true; + cd.suspended = true; return 0; } static void sched_clock_resume(void) { - if (cd.needs_suspend) { - cd.epoch_cyc = read_sched_clock(); - cd.epoch_cyc_copy = cd.epoch_cyc; - cd.suspended = false; - } + cd.epoch_cyc = read_sched_clock(); + cd.epoch_cyc_copy = cd.epoch_cyc; + cd.suspended = false; } static struct syscore_ops sched_clock_ops = { diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 8e20754dd31d..fbc8b2623d82 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -294,18 +294,24 @@ static void percpu_timer_setup(void); asmlinkage void __cpuinit secondary_start_kernel(void) { struct mm_struct *mm = &init_mm; - unsigned int cpu = smp_processor_id(); + unsigned int cpu; + + /* + * The identity mapping is uncached (strongly ordered), so + * switch away from it before attempting any exclusive accesses. + */ + cpu_switch_mm(mm->pgd, mm); + enter_lazy_tlb(mm, current); + local_flush_tlb_all(); /* * All kernel threads share the same mm context; grab a * reference and switch to it. */ + cpu = smp_processor_id(); atomic_inc(&mm->mm_count); current->active_mm = mm; cpumask_set_cpu(cpu, mm_cpumask(mm)); - cpu_switch_mm(mm->pgd, mm); - enter_lazy_tlb(mm, current); - local_flush_tlb_all(); printk("CPU%u: Booted secondary processor\n", cpu); diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index e1f906989bb8..b22d700fea27 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -42,10 +42,10 @@ static void twd_set_mode(enum clock_event_mode mode, switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - /* timer load already set up */ ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_PERIODIC; - __raw_writel(twd_timer_rate / HZ, twd_base + TWD_TIMER_LOAD); + __raw_writel(DIV_ROUND_CLOSEST(twd_timer_rate, HZ), + twd_base + TWD_TIMER_LOAD); break; case CLOCK_EVT_MODE_ONESHOT: /* period set, and timer enabled in 'next_event' hook */ diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c index 9d0a30032d7f..0dc53854a5d8 100644 --- a/arch/arm/lib/delay.c +++ b/arch/arm/lib/delay.c @@ -45,6 +45,7 @@ int read_current_timer(unsigned long *timer_val) *timer_val = delay_timer->read_current_timer(); return 0; } +EXPORT_SYMBOL_GPL(read_current_timer); static void __timer_delay(unsigned long cycles) { diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index b14207101938..e34c1bdb804d 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -21,19 +21,13 @@ config SOC_AT91SAM9 bool select CPU_ARM926T select GENERIC_CLOCKEVENTS + select MULTI_IRQ_HANDLER + select SPARSE_IRQ menu "Atmel AT91 System-on-Chip" comment "Atmel AT91 Processor" -config SOC_AT91SAM9 - bool - select AT91_SAM9_SMC - select AT91_SAM9_TIME - select CPU_ARM926T - select MULTI_IRQ_HANDLER - select SPARSE_IRQ - config SOC_AT91RM9200 bool "AT91RM9200" select CPU_ARM920T @@ -500,8 +494,17 @@ endif comment "Generic Board Type" +config MACH_AT91RM9200_DT + bool "Atmel AT91RM9200 Evaluation Kits with device-tree support" + depends on SOC_AT91RM9200 + select USE_OF + help + Select this if you want to experiment device-tree with + an Atmel RM9200 Evaluation Kit. + config MACH_AT91SAM_DT bool "Atmel AT91SAM Evaluation Kits with device-tree support" + depends on SOC_AT91SAM9 select USE_OF help Select this if you want to experiment device-tree with diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 3bb7a51efc9d..b38a1dcb79b8 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -88,6 +88,7 @@ obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o # AT91SAM board with device-tree +obj-$(CONFIG_MACH_AT91RM9200_DT) += board-rm9200-dt.o obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o # AT91X40 board-specific support diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index b4f0565aff63..6cceb42a4c33 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -187,13 +187,31 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200.0", &twi_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), CLKDEV_CON_ID("pioD", &pioD_clk), + /* usart lookup table for DT entries */ + CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), + CLKDEV_CON_DEV_ID("usart", "fffc0000.serial", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "fffc4000.serial", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "fffc8000.serial", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "fffcc000.serial", &usart3_clk), + /* tc lookup table for DT entries */ + CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk), + CLKDEV_CON_DEV_ID("t0_clk", "fffa4000.timer", &tc3_clk), + CLKDEV_CON_DEV_ID("t1_clk", "fffa4000.timer", &tc4_clk), + CLKDEV_CON_DEV_ID("t2_clk", "fffa4000.timer", &tc5_clk), + CLKDEV_CON_DEV_ID("hclk", "300000.ohci", &ohci_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk), + CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioD_clk), }; static struct clk_lookup usart_clocks_lookups[] = { @@ -361,10 +379,10 @@ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { 0 /* Advanced Interrupt Controller (IRQ6) */ }; -struct at91_init_soc __initdata at91rm9200_soc = { +AT91_SOC_START(rm9200) .map_io = at91rm9200_map_io, .default_irq_priority = at91rm9200_default_irq_priority, .ioremap_registers = at91rm9200_ioremap_registers, .register_clocks = at91rm9200_register_clocks, .init = at91rm9200_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index a563189cdfc3..3cee0e6ea7c3 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -68,7 +68,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) /* Enable overcurrent notification */ for (i = 0; i < data->ports; i++) { - if (data->overcurrent_pin[i]) + if (gpio_is_valid(data->overcurrent_pin[i])) at91_set_gpio_input(data->overcurrent_pin[i], 1); } @@ -479,7 +479,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91rm9200_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; @@ -512,7 +512,7 @@ static struct resource twi_resources[] = { static struct platform_device at91rm9200_twi_device = { .name = "i2c-at91rm9200", - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index aaa443b48c91..cafe98836c8a 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -24,6 +24,9 @@ #include <linux/irq.h> #include <linux/clockchips.h> #include <linux/export.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <asm/mach/time.h> @@ -91,7 +94,8 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id) static struct irqaction at91rm9200_timer_irq = { .name = "at91_tick", .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = at91rm9200_timer_interrupt + .handler = at91rm9200_timer_interrupt, + .irq = NR_IRQS_LEGACY + AT91_ID_SYS, }; static cycle_t read_clk32k(struct clocksource *cs) @@ -179,8 +183,60 @@ static struct clock_event_device clkevt = { void __iomem *at91_st_base; EXPORT_SYMBOL_GPL(at91_st_base); +#ifdef CONFIG_OF +static struct of_device_id at91rm9200_st_timer_ids[] = { + { .compatible = "atmel,at91rm9200-st" }, + { /* sentinel */ } +}; + +static int __init of_at91rm9200_st_init(void) +{ + struct device_node *np; + int ret; + + np = of_find_matching_node(NULL, at91rm9200_st_timer_ids); + if (!np) + goto err; + + at91_st_base = of_iomap(np, 0); + if (!at91_st_base) + goto node_err; + + /* Get the interrupts property */ + ret = irq_of_parse_and_map(np, 0); + if (!ret) + goto ioremap_err; + at91rm9200_timer_irq.irq = ret; + + of_node_put(np); + + return 0; + +ioremap_err: + iounmap(at91_st_base); +node_err: + of_node_put(np); +err: + return -EINVAL; +} +#else +static int __init of_at91rm9200_st_init(void) +{ + return -EINVAL; +} +#endif + void __init at91rm9200_ioremap_st(u32 addr) { +#ifdef CONFIG_OF + struct device_node *np; + + np = of_find_matching_node(NULL, at91rm9200_st_timer_ids); + if (np) { + of_node_put(np); + return; + } +#endif at91_st_base = ioremap(addr, 256); if (!at91_st_base) panic("Impossible to ioremap ST\n"); @@ -191,13 +247,16 @@ void __init at91rm9200_ioremap_st(u32 addr) */ void __init at91rm9200_timer_init(void) { + /* For device tree enabled device: initialize here */ + of_at91rm9200_st_init(); + /* Disable all timer interrupts, and clear any pending ones */ at91_st_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS); at91_st_read(AT91_ST_SR); /* Make IRQs happen for the system timer */ - setup_irq(NR_IRQS_LEGACY + AT91_ID_SYS, &at91rm9200_timer_irq); + setup_irq(at91rm9200_timer_irq.irq, &at91rm9200_timer_irq); /* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used * directly for the clocksource and all clockevents, after adjusting diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index ad29f93f20ca..c9e029e44d8a 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -211,8 +211,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260", &twi_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi_clk), /* more usart lookup table for DT entries */ CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk), @@ -230,11 +230,15 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t1_clk", "fffdc000.timer", &tc4_clk), CLKDEV_CON_DEV_ID("t2_clk", "fffdc000.timer", &tc5_clk), CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &ohci_clk), + CLKDEV_CON_DEV_ID("mci_clk", "fffa8000.mmc", &mmc_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk), }; static struct clk_lookup usart_clocks_lookups[] = { @@ -390,10 +394,10 @@ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; -struct at91_init_soc __initdata at91sam9260_soc = { +AT91_SOC_START(sam9260) .map_io = at91sam9260_map_io, .default_irq_priority = at91sam9260_default_irq_priority, .ioremap_registers = at91sam9260_ioremap_registers, .register_clocks = at91sam9260_register_clocks, .init = at91sam9260_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index a76b8684f52d..414bd855fb0c 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -72,7 +72,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) /* Enable overcurrent notification */ for (i = 0; i < data->ports; i++) { - if (data->overcurrent_pin[i]) + if (gpio_is_valid(data->overcurrent_pin[i])) at91_set_gpio_input(data->overcurrent_pin[i], 1); } @@ -389,7 +389,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91sam9260_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; @@ -421,7 +421,7 @@ static struct resource twi_resources[] = { }; static struct platform_device at91sam9260_twi_device = { - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 8d999eb1a137..4d262f346fd9 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -178,8 +178,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261", &twi_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261.0", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.0", &twi_clk), CLKDEV_CON_ID("pioA", &pioA_clk), CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), @@ -334,10 +334,10 @@ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; -struct at91_init_soc __initdata at91sam9261_soc = { +AT91_SOC_START(sam9261) .map_io = at91sam9261_map_io, .default_irq_priority = at91sam9261_default_irq_priority, .ioremap_registers = at91sam9261_ioremap_registers, .register_clocks = at91sam9261_register_clocks, .init = at91sam9261_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 9752f17efba9..cd604aad8e96 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -72,7 +72,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) /* Enable overcurrent notification */ for (i = 0; i < data->ports; i++) { - if (data->overcurrent_pin[i]) + if (gpio_is_valid(data->overcurrent_pin[i])) at91_set_gpio_input(data->overcurrent_pin[i], 1); } @@ -285,7 +285,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91sam9261_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; @@ -317,7 +317,7 @@ static struct resource twi_resources[] = { }; static struct platform_device at91sam9261_twi_device = { - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 6a01d0360dfb..ed390f6fa232 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -193,7 +193,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), @@ -211,7 +211,14 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("hclk", "a00000.ohci", &ohci_clk), CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk), + CLKDEV_CON_DEV_ID("mci_clk", "fff80000.mmc", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "fff84000.mmc", &mmc1_clk), CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioCDE_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCDE_clk), + CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCDE_clk), }; static struct clk_lookup usart_clocks_lookups[] = { @@ -365,10 +372,10 @@ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller (IRQ1) */ }; -struct at91_init_soc __initdata at91sam9263_soc = { +AT91_SOC_START(sam9263) .map_io = at91sam9263_map_io, .default_irq_priority = at91sam9263_default_irq_priority, .ioremap_registers = at91sam9263_ioremap_registers, .register_clocks = at91sam9263_register_clocks, .init = at91sam9263_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 8dde220b42b6..9c61e59a2104 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -78,7 +78,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) /* Enable overcurrent notification */ for (i = 0; i < data->ports; i++) { - if (data->overcurrent_pin[i]) + if (gpio_is_valid(data->overcurrent_pin[i])) at91_set_gpio_input(data->overcurrent_pin[i], 1); } @@ -567,7 +567,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91sam9263_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; @@ -600,7 +600,7 @@ static struct resource twi_resources[] = { static struct platform_device at91sam9263_twi_device = { .name = "i2c-at91sam9260", - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 84af1b506d92..c5c2acc4bf22 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -256,10 +256,18 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "fffd4000.timer", &tcb0_clk), CLKDEV_CON_DEV_ID("hclk", "700000.ohci", &uhphs_clk), CLKDEV_CON_DEV_ID("ehci_clk", "800000.ehci", &uhphs_clk), + CLKDEV_CON_DEV_ID("mci_clk", "fff80000.mmc", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "fffd0000.mmc", &mmc1_clk), CLKDEV_CON_DEV_ID(NULL, "fff84000.i2c", &twi0_clk), CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi1_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioC_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioDE_clk), + CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioDE_clk), + CLKDEV_CON_ID("pioA", &pioA_clk), CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), @@ -409,10 +417,10 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller (IRQ0) */ }; -struct at91_init_soc __initdata at91sam9g45_soc = { +AT91_SOC_START(sam9g45) .map_io = at91sam9g45_map_io, .default_irq_priority = at91sam9g45_default_irq_priority, .ioremap_registers = at91sam9g45_ioremap_registers, .register_clocks = at91sam9g45_register_clocks, .init = at91sam9g45_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index b1596072dcc2..fcd233cb33d2 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -1841,8 +1841,8 @@ static struct resource sha_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_AESTDESSHA, - .end = AT91SAM9G45_ID_AESTDESSHA, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, .flags = IORESOURCE_IRQ, }, }; @@ -1874,8 +1874,8 @@ static struct resource tdes_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_AESTDESSHA, - .end = AT91SAM9G45_ID_AESTDESSHA, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, .flags = IORESOURCE_IRQ, }, }; @@ -1910,8 +1910,8 @@ static struct resource aes_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_AESTDESSHA, - .end = AT91SAM9G45_ID_AESTDESSHA, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c index 732d3d3f4ec5..70b3a99244ab 100644 --- a/arch/arm/mach-at91/at91sam9n12.c +++ b/arch/arm/mach-at91/at91sam9n12.c @@ -168,13 +168,14 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk), CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb_clk), CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb_clk), + CLKDEV_CON_DEV_ID("mci_clk", "f0008000.mmc", &mmc_clk), CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma_clk), CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk), CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk), - CLKDEV_CON_ID("pioA", &pioAB_clk), - CLKDEV_CON_ID("pioB", &pioAB_clk), - CLKDEV_CON_ID("pioC", &pioCD_clk), - CLKDEV_CON_ID("pioD", &pioCD_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioAB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioAB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCD_clk), + CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCD_clk), /* additional fake clock for macb_hclk */ CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &uhp_clk), CLKDEV_CON_DEV_ID("ohci_clk", "500000.ohci", &uhp_clk), @@ -223,13 +224,10 @@ static void __init at91sam9n12_map_io(void) void __init at91sam9n12_initialize(void) { at91_extern_irq = (1 << AT91SAM9N12_ID_IRQ0); - - /* Register GPIO subsystem (using DT) */ - at91_gpio_init(NULL, 0); } -struct at91_init_soc __initdata at91sam9n12_soc = { +AT91_SOC_START(sam9n12) .map_io = at91sam9n12_map_io, .register_clocks = at91sam9n12_register_clocks, .init = at91sam9n12_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 72e908412222..cbe72e44c13f 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -338,10 +338,10 @@ static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; -struct at91_init_soc __initdata at91sam9rl_soc = { +AT91_SOC_START(sam9rl) .map_io = at91sam9rl_map_io, .default_irq_priority = at91sam9rl_default_irq_priority, .ioremap_registers = at91sam9rl_ioremap_registers, .register_clocks = at91sam9rl_register_clocks, .init = at91sam9rl_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index d6ca0543ce8d..5047bdc92adf 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -314,7 +314,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91sam9rl_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; @@ -347,7 +347,7 @@ static struct resource twi_resources[] = { static struct platform_device at91sam9rl_twi_device = { .name = "i2c-at91sam9g20", - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c index e5035380dcbc..3c729f0e2d3c 100644 --- a/arch/arm/mach-at91/at91sam9x5.c +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -229,15 +229,17 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk), CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb0_clk), CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "f0008000.mmc", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "f000c000.mmc", &mmc1_clk), CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma0_clk), CLKDEV_CON_DEV_ID("dma_clk", "ffffee00.dma-controller", &dma1_clk), CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk), CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk), CLKDEV_CON_DEV_ID(NULL, "f8018000.i2c", &twi2_clk), - CLKDEV_CON_ID("pioA", &pioAB_clk), - CLKDEV_CON_ID("pioB", &pioAB_clk), - CLKDEV_CON_ID("pioC", &pioCD_clk), - CLKDEV_CON_ID("pioD", &pioCD_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioAB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioAB_clk), + CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCD_clk), + CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCD_clk), /* additional fake clock for macb_hclk */ CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb0_clk), CLKDEV_CON_DEV_ID("hclk", "f8030000.ethernet", &macb1_clk), @@ -313,18 +315,11 @@ static void __init at91sam9x5_map_io(void) at91_init_sram(0, AT91SAM9X5_SRAM_BASE, AT91SAM9X5_SRAM_SIZE); } -void __init at91sam9x5_initialize(void) -{ - /* Register GPIO subsystem (using DT) */ - at91_gpio_init(NULL, 0); -} - /* -------------------------------------------------------------------- * Interrupt initialization * -------------------------------------------------------------------- */ -struct at91_init_soc __initdata at91sam9x5_soc = { +AT91_SOC_START(sam9x5) .map_io = at91sam9x5_map_io, .register_clocks = at91sam9x5_register_clocks, - .init = at91sam9x5_initialize, -}; +AT91_SOC_END diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index 6bd7300a2bc5..bb7f54474b92 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -88,6 +88,6 @@ void __init at91x40_init_interrupts(unsigned int priority[NR_AIC_IRQS]) if (!priority) priority = at91x40_default_irq_priority; - at91_aic_init(priority); + at91_aic_init(priority, at91_extern_irq); } diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c index e8f45c4e0ea8..3b6a94820fa0 100644 --- a/arch/arm/mach-at91/board-dt.c +++ b/arch/arm/mach-at91/board-dt.c @@ -30,8 +30,6 @@ static const struct of_device_id irq_of_match[] __initconst = { { .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init }, - { .compatible = "atmel,at91rm9200-gpio", .data = at91_gpio_of_irq_setup }, - { .compatible = "atmel,at91sam9x5-gpio", .data = at91_gpio_of_irq_setup }, { /*sentinel*/ } }; diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index 9cda3fd346ae..6960778af4c2 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -129,7 +129,7 @@ static struct spi_board_info neocore926_spi_devices[] = { .max_speed_hz = 125000 * 16, .bus_num = 0, .platform_data = &ads_info, - .irq = AT91SAM9263_ID_IRQ1, + .irq = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1, }, #endif }; diff --git a/arch/arm/mach-at91/board-rm9200-dt.c b/arch/arm/mach-at91/board-rm9200-dt.c new file mode 100644 index 000000000000..5f9ce3da3fde --- /dev/null +++ b/arch/arm/mach-at91/board-rm9200-dt.c @@ -0,0 +1,57 @@ +/* + * Setup code for AT91RM9200 Evaluation Kits with Device Tree support + * + * Copyright (C) 2011 Atmel, + * 2011 Nicolas Ferre <nicolas.ferre@atmel.com> + * 2012 Joachim Eastwood <manabian@gmail.com> + * + * Licensed under GPLv2 or later. + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/gpio.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> + +#include <asm/setup.h> +#include <asm/irq.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include "at91_aic.h" +#include "generic.h" + + +static const struct of_device_id irq_of_match[] __initconst = { + { .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init }, + { /*sentinel*/ } +}; + +static void __init at91rm9200_dt_init_irq(void) +{ + of_irq_init(irq_of_match); +} + +static void __init at91rm9200_dt_device_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static const char *at91rm9200_dt_board_compat[] __initdata = { + "atmel,at91rm9200", + NULL +}; + +DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)") + .timer = &at91rm9200_timer, + .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, + .init_early = at91rm9200_dt_initialize, + .init_irq = at91rm9200_dt_init_irq, + .init_machine = at91rm9200_dt_device_init, + .dt_compat = at91rm9200_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 27b3af1a3047..a9167dd45f96 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -309,7 +309,7 @@ static struct spi_board_info ek_spi_devices[] = { .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */ .bus_num = 0, .platform_data = &ads_info, - .irq = AT91SAM9261_ID_IRQ0, + .irq = NR_IRQS_LEGACY + AT91SAM9261_ID_IRQ0, .controller_data = (void *) AT91_PIN_PA28, /* CS pin */ }, #endif diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 073e17403d98..b87dbe2be0d6 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -132,7 +132,7 @@ static struct spi_board_info ek_spi_devices[] = { .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */ .bus_num = 0, .platform_data = &ads_info, - .irq = AT91SAM9263_ID_IRQ1, + .irq = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1, }, #endif }; diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index f49650677653..fc593d615e7d 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -20,13 +20,15 @@ extern void __init at91_init_sram(int bank, unsigned long base, extern void __init at91rm9200_set_type(int type); extern void __init at91_initialize(unsigned long main_clock); extern void __init at91x40_initialize(unsigned long main_clock); +extern void __init at91rm9200_dt_initialize(void); extern void __init at91_dt_initialize(void); /* Interrupts */ extern void __init at91_init_irq_default(void); extern void __init at91_init_interrupts(unsigned int priority[]); extern void __init at91x40_init_interrupts(unsigned int priority[]); -extern void __init at91_aic_init(unsigned int priority[]); +extern void __init at91_aic_init(unsigned int priority[], + unsigned int ext_irq_mask); extern int __init at91_aic_of_init(struct device_node *node, struct device_node *parent); extern int __init at91_aic5_of_init(struct device_node *node, diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index be42cf0e74bd..c5d7e1e9d757 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -23,8 +23,6 @@ #include <linux/io.h> #include <linux/irqdomain.h> #include <linux/of_address.h> -#include <linux/of_irq.h> -#include <linux/of_gpio.h> #include <asm/mach/irq.h> @@ -33,6 +31,8 @@ #include "generic.h" +#define MAX_NB_GPIO_PER_BANK 32 + struct at91_gpio_chip { struct gpio_chip chip; struct at91_gpio_chip *next; /* Bank sharing same clock */ @@ -46,6 +46,7 @@ struct at91_gpio_chip { #define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip) +static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset); static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip); static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val); static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset); @@ -55,26 +56,27 @@ static int at91_gpiolib_direction_input(struct gpio_chip *chip, unsigned offset); static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset); -#define AT91_GPIO_CHIP(name, nr_gpio) \ +#define AT91_GPIO_CHIP(name) \ { \ .chip = { \ .label = name, \ + .request = at91_gpiolib_request, \ .direction_input = at91_gpiolib_direction_input, \ .direction_output = at91_gpiolib_direction_output, \ .get = at91_gpiolib_get, \ .set = at91_gpiolib_set, \ .dbg_show = at91_gpiolib_dbg_show, \ .to_irq = at91_gpiolib_to_irq, \ - .ngpio = nr_gpio, \ + .ngpio = MAX_NB_GPIO_PER_BANK, \ }, \ } static struct at91_gpio_chip gpio_chip[] = { - AT91_GPIO_CHIP("pioA", 32), - AT91_GPIO_CHIP("pioB", 32), - AT91_GPIO_CHIP("pioC", 32), - AT91_GPIO_CHIP("pioD", 32), - AT91_GPIO_CHIP("pioE", 32), + AT91_GPIO_CHIP("pioA"), + AT91_GPIO_CHIP("pioB"), + AT91_GPIO_CHIP("pioC"), + AT91_GPIO_CHIP("pioD"), + AT91_GPIO_CHIP("pioE"), }; static int gpio_banks; @@ -89,7 +91,7 @@ static unsigned long at91_gpio_caps; static inline void __iomem *pin_to_controller(unsigned pin) { - pin /= 32; + pin /= MAX_NB_GPIO_PER_BANK; if (likely(pin < gpio_banks)) return gpio_chip[pin].regbase; @@ -98,7 +100,7 @@ static inline void __iomem *pin_to_controller(unsigned pin) static inline unsigned pin_to_mask(unsigned pin) { - return 1 << (pin % 32); + return 1 << (pin % MAX_NB_GPIO_PER_BANK); } @@ -713,80 +715,6 @@ postcore_initcall(at91_gpio_debugfs_init); */ static struct lock_class_key gpio_lock_class; -#if defined(CONFIG_OF) -static int at91_gpio_irq_map(struct irq_domain *h, unsigned int virq, - irq_hw_number_t hw) -{ - struct at91_gpio_chip *at91_gpio = h->host_data; - - irq_set_lockdep_class(virq, &gpio_lock_class); - - /* - * Can use the "simple" and not "edge" handler since it's - * shorter, and the AIC handles interrupts sanely. - */ - irq_set_chip_and_handler(virq, &gpio_irqchip, - handle_simple_irq); - set_irq_flags(virq, IRQF_VALID); - irq_set_chip_data(virq, at91_gpio); - - return 0; -} - -static struct irq_domain_ops at91_gpio_ops = { - .map = at91_gpio_irq_map, - .xlate = irq_domain_xlate_twocell, -}; - -int __init at91_gpio_of_irq_setup(struct device_node *node, - struct device_node *parent) -{ - struct at91_gpio_chip *prev = NULL; - int alias_idx = of_alias_get_id(node, "gpio"); - struct at91_gpio_chip *at91_gpio = &gpio_chip[alias_idx]; - - /* Setup proper .irq_set_type function */ - if (has_pio3()) - gpio_irqchip.irq_set_type = alt_gpio_irq_type; - else - gpio_irqchip.irq_set_type = gpio_irq_type; - - /* Disable irqs of this PIO controller */ - __raw_writel(~0, at91_gpio->regbase + PIO_IDR); - - /* Setup irq domain */ - at91_gpio->domain = irq_domain_add_linear(node, at91_gpio->chip.ngpio, - &at91_gpio_ops, at91_gpio); - if (!at91_gpio->domain) - panic("at91_gpio.%d: couldn't allocate irq domain (DT).\n", - at91_gpio->pioc_idx); - - /* Setup chained handler */ - if (at91_gpio->pioc_idx) - prev = &gpio_chip[at91_gpio->pioc_idx - 1]; - - /* The toplevel handler handles one bank of GPIOs, except - * on some SoC it can handles up to three... - * We only set up the handler for the first of the list. - */ - if (prev && prev->next == at91_gpio) - return 0; - - at91_gpio->pioc_virq = irq_create_mapping(irq_find_host(parent), - at91_gpio->pioc_hwirq); - irq_set_chip_data(at91_gpio->pioc_virq, at91_gpio); - irq_set_chained_handler(at91_gpio->pioc_virq, gpio_irq_handler); - - return 0; -} -#else -int __init at91_gpio_of_irq_setup(struct device_node *node, - struct device_node *parent) -{ - return -EINVAL; -} -#endif - /* * irqdomain initialization: pile up irqdomains on top of AIC range */ @@ -862,6 +790,16 @@ void __init at91_gpio_irq_setup(void) } /* gpiolib support */ +static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset) +{ + struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip); + void __iomem *pio = at91_gpio->regbase; + unsigned mask = 1 << offset; + + __raw_writel(mask, pio + PIO_PER); + return 0; +} + static int at91_gpiolib_direction_input(struct gpio_chip *chip, unsigned offset) { @@ -975,81 +913,11 @@ err: return -EINVAL; } -#ifdef CONFIG_OF_GPIO -static void __init of_at91_gpio_init_one(struct device_node *np) -{ - int alias_idx; - struct at91_gpio_chip *at91_gpio; - - if (!np) - return; - - alias_idx = of_alias_get_id(np, "gpio"); - if (alias_idx >= MAX_GPIO_BANKS) { - pr_err("at91_gpio, failed alias idx(%d) > MAX_GPIO_BANKS(%d), ignoring.\n", - alias_idx, MAX_GPIO_BANKS); - return; - } - - at91_gpio = &gpio_chip[alias_idx]; - at91_gpio->chip.base = alias_idx * at91_gpio->chip.ngpio; - - at91_gpio->regbase = of_iomap(np, 0); - if (!at91_gpio->regbase) { - pr_err("at91_gpio.%d, failed to map registers, ignoring.\n", - alias_idx); - return; - } - - /* Get the interrupts property */ - if (of_property_read_u32(np, "interrupts", &at91_gpio->pioc_hwirq)) { - pr_err("at91_gpio.%d, failed to get interrupts property, ignoring.\n", - alias_idx); - goto ioremap_err; - } - - /* Get capabilities from compatibility property */ - if (of_device_is_compatible(np, "atmel,at91sam9x5-gpio")) - at91_gpio_caps |= AT91_GPIO_CAP_PIO3; - - /* Setup clock */ - if (at91_gpio_setup_clk(alias_idx)) - goto ioremap_err; - - at91_gpio->chip.of_node = np; - gpio_banks = max(gpio_banks, alias_idx + 1); - at91_gpio->pioc_idx = alias_idx; - return; - -ioremap_err: - iounmap(at91_gpio->regbase); -} - -static int __init of_at91_gpio_init(void) -{ - struct device_node *np = NULL; - - /* - * This isn't ideal, but it gets things hooked up until this - * driver is converted into a platform_device - */ - for_each_compatible_node(np, NULL, "atmel,at91rm9200-gpio") - of_at91_gpio_init_one(np); - - return gpio_banks > 0 ? 0 : -EINVAL; -} -#else -static int __init of_at91_gpio_init(void) -{ - return -EINVAL; -} -#endif - static void __init at91_gpio_init_one(int idx, u32 regbase, int pioc_hwirq) { struct at91_gpio_chip *at91_gpio = &gpio_chip[idx]; - at91_gpio->chip.base = idx * at91_gpio->chip.ngpio; + at91_gpio->chip.base = idx * MAX_NB_GPIO_PER_BANK; at91_gpio->pioc_hwirq = pioc_hwirq; at91_gpio->pioc_idx = idx; @@ -1079,11 +947,11 @@ void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks) BUG_ON(nr_banks > MAX_GPIO_BANKS); - if (of_at91_gpio_init() < 0) { - /* No GPIO controller found in device tree */ - for (i = 0; i < nr_banks; i++) - at91_gpio_init_one(i, data[i].regbase, data[i].id); - } + if (of_have_populated_dt()) + return; + + for (i = 0; i < nr_banks; i++) + at91_gpio_init_one(i, data[i].regbase, data[i].id); for (i = 0; i < gpio_banks; i++) { at91_gpio = &gpio_chip[i]; diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index c55a4364ffb4..a0d92a960f46 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -70,16 +70,6 @@ struct at91_cf_data { extern void __init at91_add_device_cf(struct at91_cf_data *data); /* MMC / SD */ - /* at91_mci platform config */ -struct at91_mmc_data { - int det_pin; /* card detect IRQ */ - unsigned slot_b:1; /* uses Slot B */ - unsigned wire4:1; /* (SD) supports DAT0..DAT3 */ - int wp_pin; /* (SD) writeprotect detect */ - int vcc_pin; /* power switching (high == on) */ -}; -extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data); - /* atmel-mci platform config */ extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data); diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index 1e02c0e49dcc..febc2ee901a5 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -502,14 +502,19 @@ int __init at91_aic5_of_init(struct device_node *node, /* * Initialize the AIC interrupt controller. */ -void __init at91_aic_init(unsigned int *priority) +void __init at91_aic_init(unsigned int *priority, unsigned int ext_irq_mask) { unsigned int i; int irq_base; - if (at91_aic_pm_init()) + at91_extern_irq = kzalloc(BITS_TO_LONGS(n_irqs) + * sizeof(*at91_extern_irq), GFP_KERNEL); + + if (at91_aic_pm_init() || at91_extern_irq == NULL) panic("Unable to allocate bit maps\n"); + *at91_extern_irq = ext_irq_mask; + at91_aic_base = ioremap(AT91_AIC, 512); if (!at91_aic_base) panic("Unable to ioremap AIC registers\n"); diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index da9881b161e1..19cdd0b5b391 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -10,6 +10,7 @@ #include <linux/mm.h> #include <linux/pm.h> #include <linux/of_address.h> +#include <linux/pinctrl/machine.h> #include <asm/system_misc.h> #include <asm/mach/map.h> @@ -47,7 +48,7 @@ void __init at91_init_irq_default(void) void __init at91_init_interrupts(unsigned int *priority) { /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); + at91_aic_init(priority, at91_extern_irq); /* Enable GPIO interrupts */ at91_gpio_irq_setup(); @@ -151,7 +152,7 @@ static void __init soc_detect(u32 dbgu_base) } /* at91sam9g10 */ - if ((cidr & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) { + if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) { at91_soc_initdata.type = AT91_SOC_SAM9G10; at91_boot_soc = at91sam9261_soc; } @@ -338,6 +339,7 @@ static void at91_dt_rstc(void) } static struct of_device_id ramc_ids[] = { + { .compatible = "atmel,at91rm9200-sdramc" }, { .compatible = "atmel,at91sam9260-sdramc" }, { .compatible = "atmel,at91sam9g45-ddramc" }, { /*sentinel*/ } @@ -436,6 +438,19 @@ end: of_node_put(np); } +void __init at91rm9200_dt_initialize(void) +{ + at91_dt_ramc(); + + /* Init clock subsystem */ + at91_dt_clock_init(); + + /* Register the processor-specific clocks */ + at91_boot_soc.register_clocks(); + + at91_boot_soc.init(); +} + void __init at91_dt_initialize(void) { at91_dt_rstc(); @@ -448,7 +463,8 @@ void __init at91_dt_initialize(void) /* Register the processor-specific clocks */ at91_boot_soc.register_clocks(); - at91_boot_soc.init(); + if (at91_boot_soc.init) + at91_boot_soc.init(); } #endif @@ -463,4 +479,6 @@ void __init at91_initialize(unsigned long main_clock) at91_boot_soc.register_clocks(); at91_boot_soc.init(); + + pinctrl_provide_dummies(); } diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h index a9cfeb153719..9c6d3d4f9a23 100644 --- a/arch/arm/mach-at91/soc.h +++ b/arch/arm/mach-at91/soc.h @@ -5,6 +5,7 @@ */ struct at91_init_soc { + int builtin; unsigned int *default_irq_priority; void (*map_io)(void); void (*ioremap_registers)(void); @@ -22,9 +23,18 @@ extern struct at91_init_soc at91sam9rl_soc; extern struct at91_init_soc at91sam9x5_soc; extern struct at91_init_soc at91sam9n12_soc; +#define AT91_SOC_START(_name) \ +struct at91_init_soc __initdata at91##_name##_soc \ + __used \ + = { \ + .builtin = 1, \ + +#define AT91_SOC_END \ +}; + static inline int at91_soc_is_enabled(void) { - return at91_boot_soc.init != NULL; + return at91_boot_soc.builtin; } #if !defined(CONFIG_SOC_AT91RM9200) diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index cd0c8b1e1ecf..14e9947bad6e 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -713,8 +713,7 @@ static int dm644x_venc_setup_clock(enum vpbe_enc_timings_type type, break; case VPBE_ENC_CUSTOM_TIMINGS: if (pclock <= 27000000) { - v |= DM644X_VPSS_MUXSEL_PLL2_MODE | - DM644X_VPSS_DACCLKEN; + v |= DM644X_VPSS_DACCLKEN; writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL)); } else { /* diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index b37bef1d5ffa..f723fe13d0f0 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -32,6 +32,7 @@ #include <linux/irq.h> #include <plat/time.h> #include <linux/platform_data/usb-ehci-orion.h> +#include <plat/irq.h> #include <plat/common.h> #include <plat/addr-map.h> #include "common.h" @@ -109,8 +110,8 @@ static void __init dove_clk_init(void) orion_clkdev_add(NULL, "orion-ehci.0", usb0); orion_clkdev_add(NULL, "orion-ehci.1", usb1); - orion_clkdev_add(NULL, "mv643xx_eth.0", ge); - orion_clkdev_add("0", "sata_mv.0", sata); + orion_clkdev_add(NULL, "mv643xx_eth_port.0", ge); + orion_clkdev_add(NULL, "sata_mv.0", sata); orion_clkdev_add("0", "pcie", pex0); orion_clkdev_add("1", "pcie", pex1); orion_clkdev_add(NULL, "sdhci-dove.0", sdio0); @@ -399,7 +400,7 @@ static void __init dove_dt_init(void) (dove_tclk + 499999) / 1000000); #ifdef CONFIG_CACHE_TAUROS2 - tauros2_init(); + tauros2_init(0); #endif dove_setup_cpu_mbus(); @@ -415,7 +416,6 @@ static void __init dove_dt_init(void) dove_ehci0_init(); dove_ehci1_init(); dove_pcie_init(1, 1); - dove_crypto_init(); of_platform_populate(NULL, of_default_bus_match_table, dove_auxdata_lookup, NULL); diff --git a/arch/arm/mach-dove/include/mach/pm.h b/arch/arm/mach-dove/include/mach/pm.h index 7bcd0dfce4b1..b47f75038686 100644 --- a/arch/arm/mach-dove/include/mach/pm.h +++ b/arch/arm/mach-dove/include/mach/pm.h @@ -63,7 +63,7 @@ static inline int pmu_to_irq(int pin) static inline int irq_to_pmu(int irq) { - if (IRQ_DOVE_PMU_START < irq && irq < NR_IRQS) + if (IRQ_DOVE_PMU_START <= irq && irq < NR_IRQS) return irq - IRQ_DOVE_PMU_START; return -EINVAL; diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c index 087711524e8a..bc4344aa1009 100644 --- a/arch/arm/mach-dove/irq.c +++ b/arch/arm/mach-dove/irq.c @@ -46,8 +46,20 @@ static void pmu_irq_ack(struct irq_data *d) int pin = irq_to_pmu(d->irq); u32 u; + /* + * The PMU mask register is not RW0C: it is RW. This means that + * the bits take whatever value is written to them; if you write + * a '1', you will set the interrupt. + * + * Unfortunately this means there is NO race free way to clear + * these interrupts. + * + * So, let's structure the code so that the window is as small as + * possible. + */ u = ~(1 << (pin & 31)); - writel(u, PMU_INTERRUPT_CAUSE); + u &= readl_relaxed(PMU_INTERRUPT_CAUSE); + writel_relaxed(u, PMU_INTERRUPT_CAUSE); } static struct irq_chip pmu_irq_chip = { diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c index bb15b26041cb..0ef4435b1657 100644 --- a/arch/arm/mach-dove/pcie.c +++ b/arch/arm/mach-dove/pcie.c @@ -10,6 +10,7 @@ #include <linux/kernel.h> #include <linux/pci.h> +#include <linux/clk.h> #include <video/vga.h> #include <asm/mach/pci.h> #include <asm/mach/arch.h> @@ -188,6 +189,10 @@ static void __init add_pcie_port(int index, void __iomem *base) if (orion_pcie_link_up(base)) { struct pcie_port *pp = &pcie_port[num_pcie_ports++]; + struct clk *clk = clk_get_sys("pcie", (index ? "1" : "0")); + + if (!IS_ERR(clk)) + clk_prepare_enable(clk); printk(KERN_INFO "link up\n"); diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 715b690e5009..1947be8e5f5b 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -47,6 +47,7 @@ #include <plat/fimc-core.h> #include <plat/iic-core.h> #include <plat/tv-core.h> +#include <plat/spi-core.h> #include <plat/regs-serial.h> #include "common.h" @@ -346,6 +347,8 @@ static void __init exynos4_map_io(void) s5p_fb_setname(0, "exynos4-fb"); s5p_hdmi_setname("exynos4-hdmi"); + + s3c64xx_spi_setname("exynos4210-spi"); } static void __init exynos5_map_io(void) @@ -366,6 +369,8 @@ static void __init exynos5_map_io(void) s3c_i2c0_setname("s3c2440-i2c"); s3c_i2c1_setname("s3c2440-i2c"); s3c_i2c2_setname("s3c2440-i2c"); + + s3c64xx_spi_setname("exynos4210-spi"); } static void __init exynos4_init_clocks(int xtal) diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c index 21d568b3b149..87e07d6fc615 100644 --- a/arch/arm/mach-exynos/dma.c +++ b/arch/arm/mach-exynos/dma.c @@ -275,6 +275,9 @@ static int __init exynos_dma_init(void) exynos_pdma1_pdata.nr_valid_peri = ARRAY_SIZE(exynos4210_pdma1_peri); exynos_pdma1_pdata.peri_id = exynos4210_pdma1_peri; + + if (samsung_rev() == EXYNOS4210_REV_0) + exynos_mdma1_device.res.start = EXYNOS4_PA_S_MDMA1; } else if (soc_is_exynos4212() || soc_is_exynos4412()) { exynos_pdma0_pdata.nr_valid_peri = ARRAY_SIZE(exynos4212_pdma0_peri); diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index 8480849affb9..ed4da4544cd2 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -90,6 +90,7 @@ #define EXYNOS4_PA_MDMA0 0x10810000 #define EXYNOS4_PA_MDMA1 0x12850000 +#define EXYNOS4_PA_S_MDMA1 0x12840000 #define EXYNOS4_PA_PDMA0 0x12680000 #define EXYNOS4_PA_PDMA1 0x12690000 #define EXYNOS5_PA_MDMA0 0x10800000 diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c index e58d786faf78..eadf4b59e7d2 100644 --- a/arch/arm/mach-exynos/mach-exynos4-dt.c +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -99,6 +99,7 @@ static char const *exynos4_dt_compat[] __initdata = { DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)") /* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */ + .smp = smp_ops(exynos_smp_ops), .init_irq = exynos4_init_irq, .map_io = exynos4_dt_map_io, .handle_irq = gic_handle_irq, diff --git a/arch/arm/mach-highbank/system.c b/arch/arm/mach-highbank/system.c index 82c27230d4a9..86e37cd9376c 100644 --- a/arch/arm/mach-highbank/system.c +++ b/arch/arm/mach-highbank/system.c @@ -28,6 +28,7 @@ void highbank_restart(char mode, const char *cmd) hignbank_set_pwr_soft_reset(); scu_power_mode(scu_base_addr, SCU_PM_POWEROFF); - cpu_do_idle(); + while (1) + cpu_do_idle(); } diff --git a/arch/arm/mach-imx/clk-busy.c b/arch/arm/mach-imx/clk-busy.c index 1a7a8dd045a1..1ab91b5209e6 100644 --- a/arch/arm/mach-imx/clk-busy.c +++ b/arch/arm/mach-imx/clk-busy.c @@ -108,7 +108,7 @@ struct clk *imx_clk_busy_divider(const char *name, const char *parent_name, busy->div.hw.init = &init; clk = clk_register(NULL, &busy->div.hw); - if (!clk) + if (IS_ERR(clk)) kfree(busy); return clk; diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c index 3c1b8ff9a0a6..cc49c7ae186e 100644 --- a/arch/arm/mach-imx/clk-gate2.c +++ b/arch/arm/mach-imx/clk-gate2.c @@ -112,7 +112,7 @@ struct clk *clk_register_gate2(struct device *dev, const char *name, clk = clk_register(dev, &gate->hw); if (IS_ERR(clk)) - kfree(clk); + kfree(gate); return clk; } diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index d20d4795f4ea..01e2f843bf2e 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -127,8 +127,8 @@ int __init mx25_clocks_init(void) clk[esdhc2_ipg_per] = imx_clk_gate("esdhc2_ipg_per", "per4", ccm(CCM_CGCR0), 4); clk[gpt_ipg_per] = imx_clk_gate("gpt_ipg_per", "per5", ccm(CCM_CGCR0), 5); clk[i2c_ipg_per] = imx_clk_gate("i2c_ipg_per", "per6", ccm(CCM_CGCR0), 6); - clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per8", ccm(CCM_CGCR0), 7); - clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "ipg_per", ccm(CCM_CGCR0), 8); + clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per7", ccm(CCM_CGCR0), 7); + clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "per8", ccm(CCM_CGCR0), 8); clk[ssi1_ipg_per] = imx_clk_gate("ssi1_ipg_per", "per13", ccm(CCM_CGCR0), 13); clk[ssi2_ipg_per] = imx_clk_gate("ssi2_ipg_per", "per14", ccm(CCM_CGCR0), 14); clk[uart_ipg_per] = imx_clk_gate("uart_ipg_per", "per15", ccm(CCM_CGCR0), 15); diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 3b6b640eed24..366e5d59d886 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -109,7 +109,7 @@ int __init mx27_clocks_init(unsigned long fref) clk[per3_div] = imx_clk_divider("per3_div", "mpll_main2", CCM_PCDR1, 16, 6); clk[per4_div] = imx_clk_divider("per4_div", "mpll_main2", CCM_PCDR1, 24, 6); clk[vpu_sel] = imx_clk_mux("vpu_sel", CCM_CSCR, 21, 1, vpu_sel_clks, ARRAY_SIZE(vpu_sel_clks)); - clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 3); + clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 6); clk[usb_div] = imx_clk_divider("usb_div", "spll", CCM_CSCR, 28, 3); clk[cpu_sel] = imx_clk_mux("cpu_sel", CCM_CSCR, 15, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks)); clk[clko_sel] = imx_clk_mux("clko_sel", CCM_CCSR, 0, 5, clko_sel_clks, ARRAY_SIZE(clko_sel_clks)); @@ -121,7 +121,7 @@ int __init mx27_clocks_init(unsigned long fref) clk[ssi1_sel] = imx_clk_mux("ssi1_sel", CCM_CSCR, 22, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks)); clk[ssi2_sel] = imx_clk_mux("ssi2_sel", CCM_CSCR, 23, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks)); clk[ssi1_div] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6); - clk[ssi2_div] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 3); + clk[ssi2_div] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 6); clk[clko_en] = imx_clk_gate("clko_en", "clko_div", CCM_PCCR0, 0); clk[ssi2_ipg_gate] = imx_clk_gate("ssi2_ipg_gate", "ipg", CCM_PCCR0, 0); clk[ssi1_ipg_gate] = imx_clk_gate("ssi1_ipg_gate", "ipg", CCM_PCCR0, 1); diff --git a/arch/arm/mach-imx/ehci-imx25.c b/arch/arm/mach-imx/ehci-imx25.c index 412c583a24b0..576af7446952 100644 --- a/arch/arm/mach-imx/ehci-imx25.c +++ b/arch/arm/mach-imx/ehci-imx25.c @@ -30,7 +30,7 @@ #define MX25_H1_SIC_SHIFT 21 #define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT) #define MX25_H1_PP_BIT (1 << 18) -#define MX25_H1_PM_BIT (1 << 8) +#define MX25_H1_PM_BIT (1 << 16) #define MX25_H1_IPPUE_UP_BIT (1 << 7) #define MX25_H1_IPPUE_DOWN_BIT (1 << 6) #define MX25_H1_TLL_BIT (1 << 5) diff --git a/arch/arm/mach-imx/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c index 779e16eb65cb..293397852e4e 100644 --- a/arch/arm/mach-imx/ehci-imx35.c +++ b/arch/arm/mach-imx/ehci-imx35.c @@ -30,7 +30,7 @@ #define MX35_H1_SIC_SHIFT 21 #define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT) #define MX35_H1_PP_BIT (1 << 18) -#define MX35_H1_PM_BIT (1 << 8) +#define MX35_H1_PM_BIT (1 << 16) #define MX35_H1_IPPUE_UP_BIT (1 << 7) #define MX35_H1_IPPUE_DOWN_BIT (1 << 6) #define MX35_H1_TLL_BIT (1 << 5) diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index 9d2c843bde02..b5deb0554552 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -108,9 +108,8 @@ void __init imx3_init_l2x0(void) } l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096); - if (IS_ERR(l2x0_base)) { - printk(KERN_ERR "remapping L2 cache area failed with %ld\n", - PTR_ERR(l2x0_base)); + if (!l2x0_base) { + printk(KERN_ERR "remapping L2 cache area failed\n"); return; } diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index e428f3ab15c7..b3d86d7081a0 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -21,10 +21,9 @@ #include <linux/amba/bus.h> #include <linux/amba/clcd.h> #include <linux/io.h> +#include <linux/platform_data/clk-integrator.h> #include <linux/slab.h> -#include <linux/clkdev.h> -#include <asm/hardware/icst.h> #include <mach/lm.h> #include <mach/impd1.h> #include <asm/sizes.h> @@ -36,45 +35,6 @@ MODULE_PARM_DESC(lmid, "logic module stack position"); struct impd1_module { void __iomem *base; - struct clk vcos[2]; - struct clk_lookup *clks[3]; -}; - -static const struct icst_params impd1_vco_params = { - .ref = 24000000, /* 24 MHz */ - .vco_max = ICST525_VCO_MAX_3V, - .vco_min = ICST525_VCO_MIN, - .vd_min = 12, - .vd_max = 519, - .rd_min = 3, - .rd_max = 120, - .s2div = icst525_s2div, - .idx2s = icst525_idx2s, -}; - -static void impd1_setvco(struct clk *clk, struct icst_vco vco) -{ - struct impd1_module *impd1 = clk->data; - u32 val = vco.v | (vco.r << 9) | (vco.s << 16); - - writel(0xa05f, impd1->base + IMPD1_LOCK); - writel(val, clk->vcoreg); - writel(0, impd1->base + IMPD1_LOCK); - -#ifdef DEBUG - vco.v = val & 0x1ff; - vco.r = (val >> 9) & 0x7f; - vco.s = (val >> 16) & 7; - - pr_debug("IM-PD1: VCO%d clock is %ld Hz\n", - vconr, icst525_hz(&impd1_vco_params, vco)); -#endif -} - -static const struct clk_ops impd1_clk_ops = { - .round = icst_clk_round, - .set = icst_clk_set, - .setvco = impd1_setvco, }; void impd1_tweak_control(struct device *dev, u32 mask, u32 val) @@ -344,10 +304,6 @@ static struct impd1_device impd1_devs[] = { } }; -static struct clk fixed_14745600 = { - .rate = 14745600, -}; - static int impd1_probe(struct lm_device *dev) { struct impd1_module *impd1; @@ -376,23 +332,7 @@ static int impd1_probe(struct lm_device *dev) printk("IM-PD1 found at 0x%08lx\n", (unsigned long)dev->resource.start); - for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) { - impd1->vcos[i].ops = &impd1_clk_ops, - impd1->vcos[i].owner = THIS_MODULE, - impd1->vcos[i].params = &impd1_vco_params, - impd1->vcos[i].data = impd1; - } - impd1->vcos[0].vcoreg = impd1->base + IMPD1_OSC1; - impd1->vcos[1].vcoreg = impd1->base + IMPD1_OSC2; - - impd1->clks[0] = clkdev_alloc(&impd1->vcos[0], NULL, "lm%x:01000", - dev->id); - impd1->clks[1] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00100", - dev->id); - impd1->clks[2] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00200", - dev->id); - for (i = 0; i < ARRAY_SIZE(impd1->clks); i++) - clkdev_add(impd1->clks[i]); + integrator_impd1_clk_init(impd1->base, dev->id); for (i = 0; i < ARRAY_SIZE(impd1_devs); i++) { struct impd1_device *idev = impd1_devs + i; @@ -431,12 +371,9 @@ static int impd1_remove_one(struct device *dev, void *data) static void impd1_remove(struct lm_device *dev) { struct impd1_module *impd1 = lm_get_drvdata(dev); - int i; device_for_each_child(&dev->dev, NULL, impd1_remove_one); - - for (i = 0; i < ARRAY_SIZE(impd1->clks); i++) - clkdev_drop(impd1->clks[i]); + integrator_impd1_clk_exit(dev->id); lm_set_drvdata(dev, NULL); diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index 1694f01ce2b6..6d6bde3e15fa 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -410,6 +410,7 @@ void __init ixp4xx_pci_preinit(void) * Enable the IO window to be way up high, at 0xfffffc00 */ local_write_config(PCI_BASE_ADDRESS_5, 4, 0xfffffc01); + local_write_config(0x40, 4, 0x000080FF); /* No TRDY time limit */ } else { printk("PCI: IXP4xx is target - No bus scan performed\n"); } diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index fdf91a160884..8c0c0e2d0727 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -67,15 +67,12 @@ static struct map_desc ixp4xx_io_desc[] __initdata = { .pfn = __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS), .length = IXP4XX_PCI_CFG_REGION_SIZE, .type = MT_DEVICE - }, -#ifdef CONFIG_DEBUG_LL - { /* Debug UART mapping */ - .virtual = (unsigned long)IXP4XX_DEBUG_UART_BASE_VIRT, - .pfn = __phys_to_pfn(IXP4XX_DEBUG_UART_BASE_PHYS), - .length = IXP4XX_DEBUG_UART_REGION_SIZE, + }, { /* Queue Manager */ + .virtual = (unsigned long)IXP4XX_QMGR_BASE_VIRT, + .pfn = __phys_to_pfn(IXP4XX_QMGR_BASE_PHYS), + .length = IXP4XX_QMGR_REGION_SIZE, .type = MT_DEVICE - } -#endif + }, }; void __init ixp4xx_map_io(void) diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c index b800a031207c..53b8348dfcc2 100644 --- a/arch/arm/mach-ixp4xx/goramo_mlr.c +++ b/arch/arm/mach-ixp4xx/goramo_mlr.c @@ -15,6 +15,7 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/pci.h> +#include <asm/system_info.h> #define SLOT_ETHA 0x0B /* IDSEL = AD21 */ #define SLOT_ETHB 0x0C /* IDSEL = AD20 */ @@ -329,7 +330,7 @@ static struct platform_device device_hss_tab[] = { }; -static struct platform_device *device_tab[6] __initdata = { +static struct platform_device *device_tab[7] __initdata = { &device_flash, /* index 0 */ }; diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S index 8c9f8d564492..ff686cbc5df4 100644 --- a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S +++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S @@ -17,8 +17,8 @@ #else mov \rp, #0 #endif - orr \rv, \rp, #0xff000000 @ virtual - orr \rv, \rv, #0x00b00000 + orr \rv, \rp, #0xfe000000 @ virtual + orr \rv, \rv, #0x00f00000 orr \rp, \rp, #0xc8000000 @ physical .endm diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h index eb68b61ce975..c5bae9c035d5 100644 --- a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h +++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h @@ -30,51 +30,43 @@ * * 0x50000000 0x10000000 ioremap'd EXP BUS * - * 0x6000000 0x00004000 ioremap'd QMgr + * 0xC8000000 0x00013000 0xFEF00000 On-Chip Peripherals * - * 0xC0000000 0x00001000 0xffbff000 PCI CFG + * 0xC0000000 0x00001000 0xFEF13000 PCI CFG * - * 0xC4000000 0x00001000 0xffbfe000 EXP CFG + * 0xC4000000 0x00001000 0xFEF14000 EXP CFG * - * 0xC8000000 0x00013000 0xffbeb000 On-Chip Peripherals + * 0x60000000 0x00004000 0xFEF15000 QMgr */ /* * Queue Manager */ -#define IXP4XX_QMGR_BASE_PHYS (0x60000000) -#define IXP4XX_QMGR_REGION_SIZE (0x00004000) +#define IXP4XX_QMGR_BASE_PHYS 0x60000000 +#define IXP4XX_QMGR_BASE_VIRT IOMEM(0xFEF15000) +#define IXP4XX_QMGR_REGION_SIZE 0x00004000 /* - * Expansion BUS Configuration registers + * Peripheral space, including debug UART. Must be section-aligned so that + * it can be used with the low-level debug code. */ -#define IXP4XX_EXP_CFG_BASE_PHYS (0xC4000000) -#define IXP4XX_EXP_CFG_BASE_VIRT IOMEM(0xFFBFE000) -#define IXP4XX_EXP_CFG_REGION_SIZE (0x00001000) +#define IXP4XX_PERIPHERAL_BASE_PHYS 0xC8000000 +#define IXP4XX_PERIPHERAL_BASE_VIRT IOMEM(0xFEF00000) +#define IXP4XX_PERIPHERAL_REGION_SIZE 0x00013000 /* * PCI Config registers */ -#define IXP4XX_PCI_CFG_BASE_PHYS (0xC0000000) -#define IXP4XX_PCI_CFG_BASE_VIRT IOMEM(0xFFBFF000) -#define IXP4XX_PCI_CFG_REGION_SIZE (0x00001000) - -/* - * Peripheral space - */ -#define IXP4XX_PERIPHERAL_BASE_PHYS (0xC8000000) -#define IXP4XX_PERIPHERAL_BASE_VIRT IOMEM(0xFFBEB000) -#define IXP4XX_PERIPHERAL_REGION_SIZE (0x00013000) +#define IXP4XX_PCI_CFG_BASE_PHYS 0xC0000000 +#define IXP4XX_PCI_CFG_BASE_VIRT IOMEM(0xFEF13000) +#define IXP4XX_PCI_CFG_REGION_SIZE 0x00001000 /* - * Debug UART - * - * This is basically a remap of UART1 into a region that is section - * aligned so that it * can be used with the low-level debug code. + * Expansion BUS Configuration registers */ -#define IXP4XX_DEBUG_UART_BASE_PHYS (0xC8000000) -#define IXP4XX_DEBUG_UART_BASE_VIRT IOMEM(0xffb00000) -#define IXP4XX_DEBUG_UART_REGION_SIZE (0x00001000) +#define IXP4XX_EXP_CFG_BASE_PHYS 0xC4000000 +#define IXP4XX_EXP_CFG_BASE_VIRT 0xFEF14000 +#define IXP4XX_EXP_CFG_REGION_SIZE 0x00001000 #define IXP4XX_EXP_CS0_OFFSET 0x00 #define IXP4XX_EXP_CS1_OFFSET 0x04 diff --git a/arch/arm/mach-ixp4xx/include/mach/qmgr.h b/arch/arm/mach-ixp4xx/include/mach/qmgr.h index 9e7cad2d54cb..4de8da536dbb 100644 --- a/arch/arm/mach-ixp4xx/include/mach/qmgr.h +++ b/arch/arm/mach-ixp4xx/include/mach/qmgr.h @@ -86,7 +86,7 @@ void qmgr_release_queue(unsigned int queue); static inline void qmgr_put_entry(unsigned int queue, u32 val) { - extern struct qmgr_regs __iomem *qmgr_regs; + struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; #if DEBUG_QMGR BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */ @@ -99,7 +99,7 @@ static inline void qmgr_put_entry(unsigned int queue, u32 val) static inline u32 qmgr_get_entry(unsigned int queue) { u32 val; - extern struct qmgr_regs __iomem *qmgr_regs; + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; val = __raw_readl(&qmgr_regs->acc[queue][0]); #if DEBUG_QMGR BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */ @@ -112,14 +112,14 @@ static inline u32 qmgr_get_entry(unsigned int queue) static inline int __qmgr_get_stat1(unsigned int queue) { - extern struct qmgr_regs __iomem *qmgr_regs; + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; return (__raw_readl(&qmgr_regs->stat1[queue >> 3]) >> ((queue & 7) << 2)) & 0xF; } static inline int __qmgr_get_stat2(unsigned int queue) { - extern struct qmgr_regs __iomem *qmgr_regs; + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; BUG_ON(queue >= HALF_QUEUES); return (__raw_readl(&qmgr_regs->stat2[queue >> 4]) >> ((queue & 0xF) << 1)) & 0x3; @@ -145,7 +145,7 @@ static inline int qmgr_stat_empty(unsigned int queue) */ static inline int qmgr_stat_below_low_watermark(unsigned int queue) { - extern struct qmgr_regs __iomem *qmgr_regs; + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; if (queue >= HALF_QUEUES) return (__raw_readl(&qmgr_regs->statne_h) >> (queue - HALF_QUEUES)) & 0x01; @@ -172,7 +172,7 @@ static inline int qmgr_stat_above_high_watermark(unsigned int queue) */ static inline int qmgr_stat_full(unsigned int queue) { - extern struct qmgr_regs __iomem *qmgr_regs; + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; if (queue >= HALF_QUEUES) return (__raw_readl(&qmgr_regs->statf_h) >> (queue - HALF_QUEUES)) & 0x01; diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c index a17ed79207a4..d4eb09a62863 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c @@ -116,7 +116,11 @@ /* NPE mailbox_status value for reset */ #define RESET_MBOX_STAT 0x0000F0F0 -const char *npe_names[] = { "NPE-A", "NPE-B", "NPE-C" }; +#define NPE_A_FIRMWARE "NPE-A" +#define NPE_B_FIRMWARE "NPE-B" +#define NPE_C_FIRMWARE "NPE-C" + +const char *npe_names[] = { NPE_A_FIRMWARE, NPE_B_FIRMWARE, NPE_C_FIRMWARE }; #define print_npe(pri, npe, fmt, ...) \ printk(pri "%s: " fmt, npe_name(npe), ## __VA_ARGS__) @@ -724,6 +728,9 @@ module_exit(npe_cleanup_module); MODULE_AUTHOR("Krzysztof Halasa"); MODULE_LICENSE("GPL v2"); +MODULE_FIRMWARE(NPE_A_FIRMWARE); +MODULE_FIRMWARE(NPE_B_FIRMWARE); +MODULE_FIRMWARE(NPE_C_FIRMWARE); EXPORT_SYMBOL(npe_names); EXPORT_SYMBOL(npe_running); diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c index 852f7c9f87d0..9d1b6b7c394c 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c @@ -14,7 +14,7 @@ #include <linux/module.h> #include <mach/qmgr.h> -struct qmgr_regs __iomem *qmgr_regs; +static struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; static struct resource *mem_res; static spinlock_t qmgr_lock; static u32 used_sram_bitmap[4]; /* 128 16-dword pages */ @@ -293,12 +293,6 @@ static int qmgr_init(void) if (mem_res == NULL) return -EBUSY; - qmgr_regs = ioremap(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE); - if (qmgr_regs == NULL) { - err = -ENOMEM; - goto error_map; - } - /* reset qmgr registers */ for (i = 0; i < 4; i++) { __raw_writel(0x33333333, &qmgr_regs->stat1[i]); @@ -347,8 +341,6 @@ static int qmgr_init(void) error_irq2: free_irq(IRQ_IXP4XX_QM1, NULL); error_irq: - iounmap(qmgr_regs); -error_map: release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE); return err; } @@ -359,7 +351,6 @@ static void qmgr_remove(void) free_irq(IRQ_IXP4XX_QM2, NULL); synchronize_irq(IRQ_IXP4XX_QM1); synchronize_irq(IRQ_IXP4XX_QM2); - iounmap(qmgr_regs); release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE); } @@ -369,7 +360,6 @@ module_exit(qmgr_remove); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Krzysztof Halasa"); -EXPORT_SYMBOL(qmgr_regs); EXPORT_SYMBOL(qmgr_set_irq); EXPORT_SYMBOL(qmgr_enable_irq); EXPORT_SYMBOL(qmgr_disable_irq); diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 70c5a2882409..d94872fed8c0 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -51,9 +51,7 @@ static void __init kirkwood_dt_init(void) kirkwood_setup_cpu_mbus(); -#ifdef CONFIG_CACHE_FEROCEON_L2 kirkwood_l2_init(); -#endif /* Setup root of clk tree */ kirkwood_clk_init(); diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 3991077f58a2..2c6c218fb79e 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -633,6 +633,7 @@ char * __init kirkwood_id(void) void __init kirkwood_l2_init(void) { +#ifdef CONFIG_CACHE_FEROCEON_L2 #ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG); feroceon_l2_init(1); @@ -640,6 +641,7 @@ void __init kirkwood_l2_init(void) writel(readl(L2_CONFIG_REG) & ~L2_WRITETHROUGH, L2_CONFIG_REG); feroceon_l2_init(0); #endif +#endif } void __init kirkwood_init(void) @@ -657,9 +659,7 @@ void __init kirkwood_init(void) kirkwood_setup_cpu_mbus(); -#ifdef CONFIG_CACHE_FEROCEON_L2 kirkwood_l2_init(); -#endif /* Setup root of clk tree */ kirkwood_clk_init(); diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index ec544918b12c..74fc5a074fc4 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -207,14 +207,19 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) return 1; } +/* + * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it + * is operating as a root complex this needs to be switched to + * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on + * the device. Decoding setup is handled by the orion code. + */ static void __devinit rc_pci_fixup(struct pci_dev *dev) { - /* - * Prevent enumeration of root complex. - */ if (dev->bus->parent == NULL && dev->devfn == 0) { int i; + dev->class &= 0xff; + dev->class |= PCI_CLASS_BRIDGE_HOST << 8; for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { dev->resource[i].start = 0; dev->resource[i].end = 0; diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c index bfa1eab91f41..22ef8a1abe08 100644 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ b/arch/arm/mach-nomadik/board-nhk8815.c @@ -24,6 +24,7 @@ #include <linux/i2c.h> #include <linux/io.h> #include <linux/pinctrl/machine.h> +#include <linux/platform_data/pinctrl-nomadik.h> #include <asm/hardware/vic.h> #include <asm/sizes.h> #include <asm/mach-types.h> @@ -32,9 +33,7 @@ #include <asm/mach/flash.h> #include <asm/mach/time.h> -#include <plat/gpio-nomadik.h> #include <plat/mtu.h> -#include <plat/pincfg.h> #include <linux/platform_data/mtd-nomadik-nand.h> #include <mach/fsmc.h> diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index b617eaed0ce5..1273931303fb 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -26,8 +26,8 @@ #include <linux/irq.h> #include <linux/dma-mapping.h> #include <linux/platform_data/clk-nomadik.h> +#include <linux/platform_data/pinctrl-nomadik.h> -#include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/irqs.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c index 6d14454d4609..0c2f6628299a 100644 --- a/arch/arm/mach-nomadik/i2c-8815nhk.c +++ b/arch/arm/mach-nomadik/i2c-8815nhk.c @@ -4,8 +4,7 @@ #include <linux/i2c-algo-bit.h> #include <linux/i2c-gpio.h> #include <linux/platform_device.h> -#include <plat/gpio-nomadik.h> -#include <plat/pincfg.h> +#include <linux/platform_data/pinctrl-nomadik.h> /* * There are two busses in the 8815NHK. diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 9518bf5996dc..e255164ff087 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -444,16 +444,28 @@ static struct omap1_cam_platform_data ams_delta_camera_platform_data = { .lclk_khz_max = 1334, /* results in 5fps CIF, 10fps QCIF */ }; +static struct platform_device ams_delta_audio_device = { + .name = "ams-delta-audio", + .id = -1, +}; + +static struct platform_device cx20442_codec_device = { + .name = "cx20442-codec", + .id = -1, +}; + static struct platform_device *ams_delta_devices[] __initdata = { &latch1_gpio_device, &latch2_gpio_device, &ams_delta_kp_device, &ams_delta_camera_device, + &ams_delta_audio_device, }; static struct platform_device *late_devices[] __initdata = { &ams_delta_nand_device, &ams_delta_lcd_device, + &cx20442_codec_device, }; static void __init ams_delta_init(void) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 2a1a898c7f90..d669e227e00c 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -11,7 +11,6 @@ config ARCH_OMAP2PLUS_TYPICAL select I2C_OMAP select MENELAUS if ARCH_OMAP2 select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5 - select PINCTRL select PM_RUNTIME select REGULATOR select SERIAL_OMAP diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 48d5e41dfbfa..378590694447 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -580,6 +580,11 @@ static void __init igep_wlan_bt_init(void) } else return; + /* Make sure that the GPIO pins are muxed correctly */ + omap_mux_init_gpio(igep_wlan_bt_gpios[0].gpio, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(igep_wlan_bt_gpios[1].gpio, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(igep_wlan_bt_gpios[2].gpio, OMAP_PIN_OUTPUT); + err = gpio_request_array(igep_wlan_bt_gpios, ARRAY_SIZE(igep_wlan_bt_gpios)); if (err) { diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 388c431c745a..d41ab98890ff 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -24,6 +24,7 @@ #include <linux/input.h> #include <linux/gpio_keys.h> #include <linux/opp.h> +#include <linux/cpu.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -444,27 +445,31 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static void __init beagle_opp_init(void) +static int __init beagle_opp_init(void) { int r = 0; - /* Initialize the omap3 opp table */ - if (omap3_opp_init()) { + if (!machine_is_omap3_beagle()) + return 0; + + /* Initialize the omap3 opp table if not already created. */ + r = omap3_opp_init(); + if (IS_ERR_VALUE(r) && (r != -EEXIST)) { pr_err("%s: opp default init failed\n", __func__); - return; + return r; } /* Custom OPP enabled for all xM versions */ if (cpu_is_omap3630()) { struct device *mpu_dev, *iva_dev; - mpu_dev = omap_device_get_by_hwmod_name("mpu"); + mpu_dev = get_cpu_device(0); iva_dev = omap_device_get_by_hwmod_name("iva"); if (IS_ERR(mpu_dev) || IS_ERR(iva_dev)) { pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n", __func__, mpu_dev, iva_dev); - return; + return -ENODEV; } /* Enable MPU 1GHz and lower opps */ r = opp_enable(mpu_dev, 800000000); @@ -484,8 +489,9 @@ static void __init beagle_opp_init(void) opp_disable(iva_dev, 660000000); } } - return; + return 0; } +device_initcall(beagle_opp_init); static void __init omap3_beagle_init(void) { @@ -522,8 +528,6 @@ static void __init omap3_beagle_init(void) /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); - - beagle_opp_init(); } MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c index 114ab4b8e0e3..1a45d6bd2539 100644 --- a/arch/arm/mach-omap2/clock33xx_data.c +++ b/arch/arm/mach-omap2/clock33xx_data.c @@ -1073,6 +1073,8 @@ static struct omap_clk am33xx_clks[] = { CLK(NULL, "gfx_fck_div_ck", &gfx_fck_div_ck, CK_AM33XX), CLK(NULL, "sysclkout_pre_ck", &sysclkout_pre_ck, CK_AM33XX), CLK(NULL, "clkout2_ck", &clkout2_ck, CK_AM33XX), + CLK(NULL, "timer_32k_ck", &clkdiv32k_ick, CK_AM33XX), + CLK(NULL, "timer_sys_ck", &sys_clkin_ck, CK_AM33XX), }; int __init am33xx_clk_init(void) diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index d661d138f270..6efc30c961a5 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -3294,7 +3294,7 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "auxclk5_src_ck", &auxclk5_src_ck, CK_443X), CLK(NULL, "auxclk5_ck", &auxclk5_ck, CK_443X), CLK(NULL, "auxclkreq5_ck", &auxclkreq5_ck, CK_443X), - CLK(NULL, "gpmc_ck", &dummy_ck, CK_443X), + CLK("omap-gpmc", "fck", &dummy_ck, CK_443X), CLK("omap_i2c.1", "ick", &dummy_ck, CK_443X), CLK("omap_i2c.2", "ick", &dummy_ck, CK_443X), CLK("omap_i2c.3", "ick", &dummy_ck, CK_443X), diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index cbb879139c51..512e79a842cb 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -925,15 +925,18 @@ static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm) if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_enable) return -EINVAL; + spin_lock_irqsave(&clkdm->lock, flags); + /* * For arch's with no autodeps, clkcm_clk_enable * should be called for every clock instance or hwmod that is * enabled, so the clkdm can be force woken up. */ - if ((atomic_inc_return(&clkdm->usecount) > 1) && autodeps) + if ((atomic_inc_return(&clkdm->usecount) > 1) && autodeps) { + spin_unlock_irqrestore(&clkdm->lock, flags); return 0; + } - spin_lock_irqsave(&clkdm->lock, flags); arch_clkdm->clkdm_clk_enable(clkdm); pwrdm_state_switch(clkdm->pwrdm.ptr); spin_unlock_irqrestore(&clkdm->lock, flags); @@ -950,15 +953,19 @@ static int _clkdm_clk_hwmod_disable(struct clockdomain *clkdm) if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_disable) return -EINVAL; + spin_lock_irqsave(&clkdm->lock, flags); + if (atomic_read(&clkdm->usecount) == 0) { + spin_unlock_irqrestore(&clkdm->lock, flags); WARN_ON(1); /* underflow */ return -ERANGE; } - if (atomic_dec_return(&clkdm->usecount) > 0) + if (atomic_dec_return(&clkdm->usecount) > 0) { + spin_unlock_irqrestore(&clkdm->lock, flags); return 0; + } - spin_lock_irqsave(&clkdm->lock, flags); arch_clkdm->clkdm_clk_disable(clkdm); pwrdm_state_switch(clkdm->pwrdm.ptr); spin_unlock_irqrestore(&clkdm->lock, flags); diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c index b56d06b48782..95192a062d5d 100644 --- a/arch/arm/mach-omap2/clockdomains44xx_data.c +++ b/arch/arm/mach-omap2/clockdomains44xx_data.c @@ -359,7 +359,7 @@ static struct clockdomain iss_44xx_clkdm = { .clkdm_offs = OMAP4430_CM2_CAM_CAM_CDOFFS, .wkdep_srcs = iss_wkup_sleep_deps, .sleepdep_srcs = iss_wkup_sleep_deps, - .flags = CLKDM_CAN_HWSUP_SWSUP, + .flags = CLKDM_CAN_SWSUP, }; static struct clockdomain l3_dss_44xx_clkdm = { diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index 48daac2581b4..84551f205e46 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -64,30 +64,36 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, struct spi_board_info *spi_bi = &ads7846_spi_board_info; int err; - err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown"); - if (err) { - pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err); - return; - } + /* + * If a board defines get_pendown_state() function, request the pendown + * GPIO and set the GPIO debounce time. + * If a board does not define the get_pendown_state() function, then + * the ads7846 driver will setup the pendown GPIO itself. + */ + if (board_pdata && board_pdata->get_pendown_state) { + err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown"); + if (err) { + pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err); + return; + } - if (gpio_debounce) - gpio_set_debounce(gpio_pendown, gpio_debounce); + if (gpio_debounce) + gpio_set_debounce(gpio_pendown, gpio_debounce); + + gpio_export(gpio_pendown, 0); + } spi_bi->bus_num = bus_num; spi_bi->irq = gpio_to_irq(gpio_pendown); + ads7846_config.gpio_pendown = gpio_pendown; + if (board_pdata) { board_pdata->gpio_pendown = gpio_pendown; + board_pdata->gpio_pendown_debounce = gpio_debounce; spi_bi->platform_data = board_pdata; - if (board_pdata->get_pendown_state) - gpio_export(gpio_pendown, 0); - } else { - ads7846_config.gpio_pendown = gpio_pendown; } - if (!board_pdata || (board_pdata && !board_pdata->get_pendown_state)) - gpio_free(gpio_pendown); - spi_register_board_info(&ads7846_spi_board_info, 1); } #else diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index c8c211731d26..c72b5a727720 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -19,6 +19,7 @@ #include <linux/of.h> #include <linux/pinctrl/machine.h> #include <linux/platform_data/omap4-keypad.h> +#include <linux/platform_data/omap_ocp2scp.h> #include <asm/mach-types.h> #include <asm/mach/map.h> @@ -341,7 +342,7 @@ static void __init omap_init_dmic(void) oh = omap_hwmod_lookup("dmic"); if (!oh) { - printk(KERN_ERR "Could not look up mcpdm hw_mod\n"); + pr_err("Could not look up dmic hw_mod\n"); return; } @@ -613,6 +614,83 @@ static void omap_init_vout(void) static inline void omap_init_vout(void) {} #endif +#if defined(CONFIG_OMAP_OCP2SCP) || defined(CONFIG_OMAP_OCP2SCP_MODULE) +static int count_ocp2scp_devices(struct omap_ocp2scp_dev *ocp2scp_dev) +{ + int cnt = 0; + + while (ocp2scp_dev->drv_name != NULL) { + cnt++; + ocp2scp_dev++; + } + + return cnt; +} + +static void omap_init_ocp2scp(void) +{ + struct omap_hwmod *oh; + struct platform_device *pdev; + int bus_id = -1, dev_cnt = 0, i; + struct omap_ocp2scp_dev *ocp2scp_dev; + const char *oh_name, *name; + struct omap_ocp2scp_platform_data *pdata; + + if (!cpu_is_omap44xx()) + return; + + oh_name = "ocp2scp_usb_phy"; + name = "omap-ocp2scp"; + + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + pr_err("%s: could not find omap_hwmod for %s\n", __func__, + oh_name); + return; + } + + pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + pr_err("%s: No memory for ocp2scp pdata\n", __func__); + return; + } + + ocp2scp_dev = oh->dev_attr; + dev_cnt = count_ocp2scp_devices(ocp2scp_dev); + + if (!dev_cnt) { + pr_err("%s: No devices connected to ocp2scp\n", __func__); + kfree(pdata); + return; + } + + pdata->devices = kzalloc(sizeof(struct omap_ocp2scp_dev *) + * dev_cnt, GFP_KERNEL); + if (!pdata->devices) { + pr_err("%s: No memory for ocp2scp pdata devices\n", __func__); + kfree(pdata); + return; + } + + for (i = 0; i < dev_cnt; i++, ocp2scp_dev++) + pdata->devices[i] = ocp2scp_dev; + + pdata->dev_cnt = dev_cnt; + + pdev = omap_device_build(name, bus_id, oh, pdata, sizeof(*pdata), NULL, + 0, false); + if (IS_ERR(pdev)) { + pr_err("Could not build omap_device for %s %s\n", + name, oh_name); + kfree(pdata->devices); + kfree(pdata); + return; + } +} +#else +static inline void omap_init_ocp2scp(void) { } +#endif + /*-------------------------------------------------------------------------*/ static int __init omap2_init_devices(void) @@ -640,6 +718,7 @@ static int __init omap2_init_devices(void) omap_init_sham(); omap_init_aes(); omap_init_vout(); + omap_init_ocp2scp(); return 0; } diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 5ac5cf30406a..92b5718fa722 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -868,9 +868,9 @@ static void __devexit gpmc_mem_exit(void) } -static void __devinit gpmc_mem_init(void) +static int __devinit gpmc_mem_init(void) { - int cs; + int cs, rc; unsigned long boot_rom_space = 0; /* never allocate the first page, to facilitate bug detection; @@ -890,13 +890,21 @@ static void __devinit gpmc_mem_init(void) if (!gpmc_cs_mem_enabled(cs)) continue; gpmc_cs_get_memconf(cs, &base, &size); - if (gpmc_cs_insert_mem(cs, base, size) < 0) - BUG(); + rc = gpmc_cs_insert_mem(cs, base, size); + if (IS_ERR_VALUE(rc)) { + while (--cs >= 0) + if (gpmc_cs_mem_enabled(cs)) + gpmc_cs_delete_mem(cs); + return rc; + } } + + return 0; } static __devinit int gpmc_probe(struct platform_device *pdev) { + int rc; u32 l; struct resource *res; @@ -936,7 +944,13 @@ static __devinit int gpmc_probe(struct platform_device *pdev) dev_info(gpmc_dev, "GPMC revision %d.%d\n", GPMC_REVISION_MAJOR(l), GPMC_REVISION_MINOR(l)); - gpmc_mem_init(); + rc = gpmc_mem_init(); + if (IS_ERR_VALUE(rc)) { + clk_disable_unprepare(gpmc_l3_clk); + clk_put(gpmc_l3_clk); + dev_err(gpmc_dev, "failed to reserve memory\n"); + return rc; + } if (IS_ERR_VALUE(gpmc_setup_irq())) dev_warn(gpmc_dev, "gpmc_setup_irq failed\n"); diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c index 17f80e4ab162..c47140bbbec4 100644 --- a/arch/arm/mach-omap2/mux34xx.c +++ b/arch/arm/mach-omap2/mux34xx.c @@ -614,16 +614,16 @@ static struct omap_mux __initdata omap3_muxmodes[] = { "sys_off_mode", NULL, NULL, NULL, "gpio_9", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(UART1_CTS, 150, - "uart1_cts", NULL, NULL, NULL, + "uart1_cts", "ssi1_rdy_tx", NULL, NULL, "gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"), _OMAP3_MUXENTRY(UART1_RTS, 149, - "uart1_rts", NULL, NULL, NULL, + "uart1_rts", "ssi1_flag_tx", NULL, NULL, "gpio_149", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(UART1_RX, 151, - "uart1_rx", NULL, "mcbsp1_clkr", "mcspi4_clk", + "uart1_rx", "ss1_wake_tx", "mcbsp1_clkr", "mcspi4_clk", "gpio_151", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(UART1_TX, 148, - "uart1_tx", NULL, NULL, NULL, + "uart1_tx", "ssi1_dat_tx", NULL, NULL, "gpio_148", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(UART2_CTS, 144, "uart2_cts", "mcbsp3_dx", "gpt9_pwm_evt", NULL, diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index b969ab1d258b..87cc6d058de2 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -422,6 +422,38 @@ static int _set_softreset(struct omap_hwmod *oh, u32 *v) } /** + * _wait_softreset_complete - wait for an OCP softreset to complete + * @oh: struct omap_hwmod * to wait on + * + * Wait until the IP block represented by @oh reports that its OCP + * softreset is complete. This can be triggered by software (see + * _ocp_softreset()) or by hardware upon returning from off-mode (one + * example is HSMMC). Waits for up to MAX_MODULE_SOFTRESET_WAIT + * microseconds. Returns the number of microseconds waited. + */ +static int _wait_softreset_complete(struct omap_hwmod *oh) +{ + struct omap_hwmod_class_sysconfig *sysc; + u32 softrst_mask; + int c = 0; + + sysc = oh->class->sysc; + + if (sysc->sysc_flags & SYSS_HAS_RESET_STATUS) + omap_test_timeout((omap_hwmod_read(oh, sysc->syss_offs) + & SYSS_RESETDONE_MASK), + MAX_MODULE_SOFTRESET_WAIT, c); + else if (sysc->sysc_flags & SYSC_HAS_RESET_STATUS) { + softrst_mask = (0x1 << sysc->sysc_fields->srst_shift); + omap_test_timeout(!(omap_hwmod_read(oh, sysc->sysc_offs) + & softrst_mask), + MAX_MODULE_SOFTRESET_WAIT, c); + } + + return c; +} + +/** * _set_dmadisable: set OCP_SYSCONFIG.DMADISABLE bit in @v * @oh: struct omap_hwmod * * @@ -1282,6 +1314,18 @@ static void _enable_sysc(struct omap_hwmod *oh) if (!oh->class->sysc) return; + /* + * Wait until reset has completed, this is needed as the IP + * block is reset automatically by hardware in some cases + * (off-mode for example), and the drivers require the + * IP to be ready when they access it + */ + if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET) + _enable_optional_clocks(oh); + _wait_softreset_complete(oh); + if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET) + _disable_optional_clocks(oh); + v = oh->_sysc_cache; sf = oh->class->sysc->sysc_flags; @@ -1804,7 +1848,7 @@ static int _am33xx_disable_module(struct omap_hwmod *oh) */ static int _ocp_softreset(struct omap_hwmod *oh) { - u32 v, softrst_mask; + u32 v; int c = 0; int ret = 0; @@ -1834,19 +1878,7 @@ static int _ocp_softreset(struct omap_hwmod *oh) if (oh->class->sysc->srst_udelay) udelay(oh->class->sysc->srst_udelay); - if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS) - omap_test_timeout((omap_hwmod_read(oh, - oh->class->sysc->syss_offs) - & SYSS_RESETDONE_MASK), - MAX_MODULE_SOFTRESET_WAIT, c); - else if (oh->class->sysc->sysc_flags & SYSC_HAS_RESET_STATUS) { - softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift); - omap_test_timeout(!(omap_hwmod_read(oh, - oh->class->sysc->sysc_offs) - & softrst_mask), - MAX_MODULE_SOFTRESET_WAIT, c); - } - + c = _wait_softreset_complete(oh); if (c == MAX_MODULE_SOFTRESET_WAIT) pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n", oh->name, MAX_MODULE_SOFTRESET_WAIT); @@ -2352,6 +2384,9 @@ static int __init _setup_reset(struct omap_hwmod *oh) if (oh->_state != _HWMOD_STATE_INITIALIZED) return -EINVAL; + if (oh->flags & HWMOD_EXT_OPT_MAIN_CLK) + return -EPERM; + if (oh->rst_lines_cnt == 0) { r = _enable(oh); if (r) { diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 652d0285bd6d..0b1249e00398 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -21,6 +21,7 @@ #include <linux/io.h> #include <linux/platform_data/gpio-omap.h> #include <linux/power/smartreflex.h> +#include <linux/platform_data/omap_ocp2scp.h> #include <plat/omap_hwmod.h> #include <plat/i2c.h> @@ -2125,6 +2126,14 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = { .name = "mcpdm", .class = &omap44xx_mcpdm_hwmod_class, .clkdm_name = "abe_clkdm", + /* + * It's suspected that the McPDM requires an off-chip main + * functional clock, controlled via I2C. This IP block is + * currently reset very early during boot, before I2C is + * available, so it doesn't seem that we have any choice in + * the kernel other than to avoid resetting it. + */ + .flags = HWMOD_EXT_OPT_MAIN_CLK, .mpu_irqs = omap44xx_mcpdm_irqs, .sdma_reqs = omap44xx_mcpdm_sdma_reqs, .main_clk = "mcpdm_fck", @@ -2681,6 +2690,32 @@ static struct omap_hwmod_class omap44xx_ocp2scp_hwmod_class = { .sysc = &omap44xx_ocp2scp_sysc, }; +/* ocp2scp dev_attr */ +static struct resource omap44xx_usb_phy_and_pll_addrs[] = { + { + .name = "usb_phy", + .start = 0x4a0ad080, + .end = 0x4a0ae000, + .flags = IORESOURCE_MEM, + }, + { + /* XXX: Remove this once control module driver is in place */ + .name = "ctrl_dev", + .start = 0x4a002300, + .end = 0x4a002303, + .flags = IORESOURCE_MEM, + }, + { } +}; + +static struct omap_ocp2scp_dev ocp2scp_dev_attr[] = { + { + .drv_name = "omap-usb2", + .res = omap44xx_usb_phy_and_pll_addrs, + }, + { } +}; + /* ocp2scp_usb_phy */ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = { .name = "ocp2scp_usb_phy", @@ -2694,6 +2729,7 @@ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = { .modulemode = MODULEMODE_HWCTRL, }, }, + .dev_attr = ocp2scp_dev_attr, }; /* diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 686137d164da..67d66131cfa7 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -91,6 +91,7 @@ extern void omap3_save_scratchpad_contents(void); #define PM_RTA_ERRATUM_i608 (1 << 0) #define PM_SDRC_WAKEUP_ERRATUM_i583 (1 << 1) +#define PM_PER_MEMORIES_ERRATUM_i582 (1 << 2) #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) extern u16 pm34xx_errata; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index ba670db1fd37..3a904de4313e 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -652,14 +652,17 @@ static void __init pm_errata_configure(void) /* Enable the l2 cache toggling in sleep logic */ enable_omap3630_toggle_l2_on_restore(); if (omap_rev() < OMAP3630_REV_ES1_2) - pm34xx_errata |= PM_SDRC_WAKEUP_ERRATUM_i583; + pm34xx_errata |= (PM_SDRC_WAKEUP_ERRATUM_i583 | + PM_PER_MEMORIES_ERRATUM_i582); + } else if (cpu_is_omap34xx()) { + pm34xx_errata |= PM_PER_MEMORIES_ERRATUM_i582; } } int __init omap3_pm_init(void) { struct power_state *pwrst, *tmp; - struct clockdomain *neon_clkdm, *mpu_clkdm; + struct clockdomain *neon_clkdm, *mpu_clkdm, *per_clkdm, *wkup_clkdm; int ret; if (!omap3_has_io_chain_ctrl()) @@ -711,6 +714,8 @@ int __init omap3_pm_init(void) neon_clkdm = clkdm_lookup("neon_clkdm"); mpu_clkdm = clkdm_lookup("mpu_clkdm"); + per_clkdm = clkdm_lookup("per_clkdm"); + wkup_clkdm = clkdm_lookup("wkup_clkdm"); #ifdef CONFIG_SUSPEND omap_pm_suspend = omap3_pm_suspend; @@ -727,6 +732,27 @@ int __init omap3_pm_init(void) if (IS_PM34XX_ERRATUM(PM_RTA_ERRATUM_i608)) omap3630_ctrl_disable_rta(); + /* + * The UART3/4 FIFO and the sidetone memory in McBSP2/3 are + * not correctly reset when the PER powerdomain comes back + * from OFF or OSWR when the CORE powerdomain is kept active. + * See OMAP36xx Erratum i582 "PER Domain reset issue after + * Domain-OFF/OSWR Wakeup". This wakeup dependency is not a + * complete workaround. The kernel must also prevent the PER + * powerdomain from going to OSWR/OFF while the CORE + * powerdomain is not going to OSWR/OFF. And if PER last + * power state was off while CORE last power state was ON, the + * UART3/4 and McBSP2/3 SIDETONE devices need to run a + * self-test using their loopback tests; if that fails, those + * devices are unusable until the PER/CORE can complete a transition + * from ON to OSWR/OFF and then back to ON. + * + * XXX Technically this workaround is only needed if off-mode + * or OSWR is enabled. + */ + if (IS_PM34XX_ERRATUM(PM_PER_MEMORIES_ERRATUM_i582)) + clkdm_add_wkdep(per_clkdm, wkup_clkdm); + clkdm_add_wkdep(neon_clkdm, mpu_clkdm); if (omap_type() != OMAP2_DEVICE_TYPE_GP) { omap3_secure_ram_storage = diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 0405c8190803..a507cd6cf4f1 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -329,6 +329,11 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt); + if (console_uart_id == bdata->id) { + omap_device_enable(pdev); + pm_runtime_set_active(&pdev->dev); + } + oh->dev_attr = uart; if (((cpu_is_omap34xx() || cpu_is_omap44xx()) && bdata->pads) diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 44f9aa7ec0c0..69e46631a7cd 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -467,7 +467,7 @@ OMAP_SYS_TIMER(3_am33xx) #ifdef CONFIG_ARCH_OMAP4 #ifdef CONFIG_LOCAL_TIMERS static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, - OMAP44XX_LOCAL_TWD_BASE, 29 + OMAP_INTC_START); + OMAP44XX_LOCAL_TWD_BASE, 29); #endif static void __init omap4_timer_init(void) diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 635e109f5ad3..a256135d8e48 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -73,6 +73,7 @@ void __init omap4_pmic_init(const char *pmic_type, { /* PMIC part*/ omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); + omap_mux_init_signal("fref_clk0_out.sys_drm_msecure", OMAP_PIN_OUTPUT); omap_pmic_init(1, 400, pmic_type, 7 + OMAP44XX_IRQ_GIC_START, pmic_data); /* Register additional devices on i2c1 bus if needed */ @@ -366,7 +367,7 @@ static struct regulator_init_data omap4_clk32kg_idata = { }; static struct regulator_consumer_supply omap4_vdd1_supply[] = { - REGULATOR_SUPPLY("vcc", "mpu.0"), + REGULATOR_SUPPLY("vcc", "cpu0"), }; static struct regulator_consumer_supply omap4_vdd2_supply[] = { diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 880249b17012..75878c37959b 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -264,7 +264,7 @@ static void __init omap_vc_i2c_init(struct voltagedomain *voltdm) if (initialized) { if (voltdm->pmic->i2c_high_speed != i2c_high_speed) - pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).", + pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).\n", __func__, voltdm->name, i2c_high_speed); return; } diff --git a/arch/arm/mach-prima2/include/mach/gpio.h b/arch/arm/mach-prima2/include/mach/gpio.h deleted file mode 100644 index 1904bb03876e..000000000000 --- a/arch/arm/mach-prima2/include/mach/gpio.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __MACH_GPIO_H -#define __MACH_GPIO_H - -/* Pull up/down values */ -enum sirfsoc_gpio_pull { - SIRFSOC_GPIO_PULL_NONE, - SIRFSOC_GPIO_PULL_UP, - SIRFSOC_GPIO_PULL_DOWN, -}; - -void sirfsoc_gpio_set_pull(unsigned gpio, unsigned mode); - -#endif diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index 5ecbd17b5641..e2c6391863fe 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -28,6 +28,7 @@ #include <linux/mfd/asic3.h> #include <linux/mtd/physmap.h> #include <linux/pda_power.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/regulator/driver.h> #include <linux/regulator/gpio-regulator.h> @@ -556,7 +557,7 @@ static struct platform_device hx4700_lcd = { */ static struct platform_pwm_backlight_data backlight_data = { - .pwm_id = 1, + .pwm_id = -1, /* Superseded by pwm_lookup */ .max_brightness = 200, .dft_brightness = 100, .pwm_period_ns = 30923, @@ -571,6 +572,10 @@ static struct platform_device backlight = { }, }; +static struct pwm_lookup hx4700_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight", NULL), +}; + /* * USB "Transceiver" */ @@ -872,6 +877,7 @@ static void __init hx4700_init(void) pxa_set_stuart_info(NULL); platform_add_devices(devices, ARRAY_SIZE(devices)); + pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup)); pxa_set_ficp_info(&ficp_info); pxa27x_set_i2c_power_info(NULL); diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 438f02fe122a..842596d4d31e 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -86,10 +86,7 @@ static void spitz_discharge1(int on) gpio_set_value(SPITZ_GPIO_LED_GREEN, on); } -static unsigned long gpio18_config[] = { - GPIO18_RDY, - GPIO18_GPIO, -}; +static unsigned long gpio18_config = GPIO18_GPIO; static void spitz_presuspend(void) { @@ -112,7 +109,7 @@ static void spitz_presuspend(void) PGSR3 &= ~SPITZ_GPIO_G3_STROBE_BIT; PGSR2 |= GPIO_bit(SPITZ_GPIO_KEY_STROBE0); - pxa2xx_mfp_config(&gpio18_config[0], 1); + pxa2xx_mfp_config(&gpio18_config, 1); gpio_request_one(18, GPIOF_OUT_INIT_HIGH, "Unknown"); gpio_free(18); @@ -131,7 +128,6 @@ static void spitz_presuspend(void) static void spitz_postsuspend(void) { - pxa2xx_mfp_config(&gpio18_config[1], 1); } static int spitz_should_wakeup(unsigned int resume_on_alarm) diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c index 749220f91a70..4407b1730539 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2440.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c @@ -163,7 +163,7 @@ static struct clk_lookup s3c2440_clk_lookup[] = { CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n), }; -static int s3c2440_clk_add(struct device *dev, struct subsys_interface *sif) +static int __init_refok s3c2440_clk_add(struct device *dev, struct subsys_interface *sif) { struct clk *clock_upll; struct clk *clock_h; diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c index ed5a95ece9eb..77ee0b732237 100644 --- a/arch/arm/mach-s3c24xx/s3c2416.c +++ b/arch/arm/mach-s3c24xx/s3c2416.c @@ -61,6 +61,7 @@ #include <plat/nand-core.h> #include <plat/adc-core.h> #include <plat/rtc-core.h> +#include <plat/spi-core.h> static struct map_desc s3c2416_iodesc[] __initdata = { IODESC_ENT(WATCHDOG), @@ -132,6 +133,7 @@ void __init s3c2416_map_io(void) /* initialize device information early */ s3c2416_default_sdhci0(); s3c2416_default_sdhci1(); + s3c64xx_spi_setname("s3c2443-spi"); iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc)); } diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c index ab648ad8fa50..165b6a6b3daa 100644 --- a/arch/arm/mach-s3c24xx/s3c2443.c +++ b/arch/arm/mach-s3c24xx/s3c2443.c @@ -43,6 +43,7 @@ #include <plat/nand-core.h> #include <plat/adc-core.h> #include <plat/rtc-core.h> +#include <plat/spi-core.h> static struct map_desc s3c2443_iodesc[] __initdata = { IODESC_ENT(WATCHDOG), @@ -100,6 +101,9 @@ void __init s3c2443_map_io(void) s3c24xx_gpiocfg_default.set_pull = s3c2443_gpio_setpull; s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull; + /* initialize device information early */ + s3c64xx_spi_setname("s3c2443-spi"); + iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc)); } diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c index 6e6a0a9d6778..111e404a81fd 100644 --- a/arch/arm/mach-s5p64x0/common.c +++ b/arch/arm/mach-s5p64x0/common.c @@ -44,6 +44,7 @@ #include <plat/sdhci.h> #include <plat/adc-core.h> #include <plat/fb-core.h> +#include <plat/spi-core.h> #include <plat/gpio-cfg.h> #include <plat/regs-irqtype.h> #include <plat/regs-serial.h> @@ -179,6 +180,7 @@ void __init s5p6440_map_io(void) /* initialize any device information early */ s3c_adc_setname("s3c64xx-adc"); s3c_fb_setname("s5p64x0-fb"); + s3c64xx_spi_setname("s5p64x0-spi"); s5p64x0_default_sdhci0(); s5p64x0_default_sdhci1(); @@ -193,6 +195,7 @@ void __init s5p6450_map_io(void) /* initialize any device information early */ s3c_adc_setname("s3c64xx-adc"); s3c_fb_setname("s5p64x0-fb"); + s3c64xx_spi_setname("s5p64x0-spi"); s5p64x0_default_sdhci0(); s5p64x0_default_sdhci1(); diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c index 621908658861..cc6e561c9958 100644 --- a/arch/arm/mach-s5pc100/common.c +++ b/arch/arm/mach-s5pc100/common.c @@ -45,6 +45,7 @@ #include <plat/fb-core.h> #include <plat/iic-core.h> #include <plat/onenand-core.h> +#include <plat/spi-core.h> #include <plat/regs-serial.h> #include <plat/watchdog-reset.h> @@ -165,6 +166,8 @@ void __init s5pc100_map_io(void) s3c_onenand_setname("s5pc100-onenand"); s3c_fb_setname("s5pc100-fb"); s3c_cfcon_setname("s5pc100-pata"); + + s3c64xx_spi_setname("s5pc100-spi"); } void __init s5pc100_init_clocks(int xtal) diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c index 4c9e9027df9a..a0c50efe8145 100644 --- a/arch/arm/mach-s5pv210/common.c +++ b/arch/arm/mach-s5pv210/common.c @@ -43,6 +43,7 @@ #include <plat/iic-core.h> #include <plat/keypad-core.h> #include <plat/tv-core.h> +#include <plat/spi-core.h> #include <plat/regs-serial.h> #include "common.h" @@ -196,6 +197,8 @@ void __init s5pv210_map_io(void) /* setup TV devices */ s5p_hdmi_setname("s5pv210-hdmi"); + + s3c64xx_spi_setname("s5pv210-spi"); } void __init s5pv210_init_clocks(int xtal) diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 2912eab3b967..3cc8b1c21da9 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -1196,7 +1196,7 @@ static void __init eva_init(void) #ifdef CONFIG_CACHE_L2X0 /* Early BRESP enable, Shared attribute override enable, 32K*8way */ - l2x0_init(__io(0xf0002000), 0x40440000, 0x82000fff); + l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff); #endif i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices)); diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c index 3cafb6ab5e9a..37b2a3133b3b 100644 --- a/arch/arm/mach-shmobile/clock-r8a7779.c +++ b/arch/arm/mach-shmobile/clock-r8a7779.c @@ -24,17 +24,17 @@ #include <linux/clkdev.h> #include <mach/common.h> -#define FRQMR 0xffc80014 -#define MSTPCR0 0xffc80030 -#define MSTPCR1 0xffc80034 -#define MSTPCR3 0xffc8003c -#define MSTPSR1 0xffc80044 -#define MSTPSR4 0xffc80048 -#define MSTPSR6 0xffc8004c -#define MSTPCR4 0xffc80050 -#define MSTPCR5 0xffc80054 -#define MSTPCR6 0xffc80058 -#define MSTPCR7 0xffc80040 +#define FRQMR IOMEM(0xffc80014) +#define MSTPCR0 IOMEM(0xffc80030) +#define MSTPCR1 IOMEM(0xffc80034) +#define MSTPCR3 IOMEM(0xffc8003c) +#define MSTPSR1 IOMEM(0xffc80044) +#define MSTPSR4 IOMEM(0xffc80048) +#define MSTPSR6 IOMEM(0xffc8004c) +#define MSTPCR4 IOMEM(0xffc80050) +#define MSTPCR5 IOMEM(0xffc80054) +#define MSTPCR6 IOMEM(0xffc80058) +#define MSTPCR7 IOMEM(0xffc80040) /* ioremap() through clock mapping mandatory to avoid * collision with ARM coherent DMA virtual memory range. diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index 2917668f0091..ebbffc25f24f 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -247,7 +247,7 @@ void __init r8a7779_add_standard_devices(void) { #ifdef CONFIG_CACHE_L2X0 /* Early BRESP enable, Shared attribute override enable, 64K*16way */ - l2x0_init((void __iomem __force *)(0xf0100000), 0x40470000, 0x82000fff); + l2x0_init(IOMEM(0xf0100000), 0x40470000, 0x82000fff); #endif r8a7779_pm_init(); diff --git a/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h b/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h +++ /dev/null diff --git a/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h b/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h +++ /dev/null diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c index 57e235f4ac74..aa5325cd1c42 100644 --- a/arch/arm/mach-tegra/board-dt-tegra20.c +++ b/arch/arm/mach-tegra/board-dt-tegra20.c @@ -182,7 +182,7 @@ DT_MACHINE_START(TEGRA_DT, "nVidia Tegra20 (Flattened Device Tree)") .init_early = tegra20_init_early, .init_irq = tegra_dt_init_irq, .handle_irq = gic_handle_irq, - .timer = &tegra_timer, + .timer = &tegra_sys_timer, .init_machine = tegra_dt_init, .init_late = tegra_dt_init_late, .restart = tegra_assert_system_reset, diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c index e4a676d4ddf7..5e92a81f9a2e 100644 --- a/arch/arm/mach-tegra/board-dt-tegra30.c +++ b/arch/arm/mach-tegra/board-dt-tegra30.c @@ -89,7 +89,7 @@ DT_MACHINE_START(TEGRA30_DT, "NVIDIA Tegra30 (Flattened Device Tree)") .init_early = tegra30_init_early, .init_irq = tegra_dt_init_irq, .handle_irq = gic_handle_irq, - .timer = &tegra_timer, + .timer = &tegra_sys_timer, .init_machine = tegra30_dt_init, .init_late = tegra_init_late, .restart = tegra_assert_system_reset, diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h index f88e5143c767..91fbe733a21e 100644 --- a/arch/arm/mach-tegra/board.h +++ b/arch/arm/mach-tegra/board.h @@ -55,5 +55,5 @@ static inline int harmony_pcie_init(void) { return 0; } void __init tegra_paz00_wifikill_init(void); -extern struct sys_timer tegra_timer; +extern struct sys_timer tegra_sys_timer; #endif diff --git a/arch/arm/mach-tegra/tegra20_clocks_data.c b/arch/arm/mach-tegra/tegra20_clocks_data.c index cc9b5fd8c3d3..8d398a33adf7 100644 --- a/arch/arm/mach-tegra/tegra20_clocks_data.c +++ b/arch/arm/mach-tegra/tegra20_clocks_data.c @@ -953,6 +953,7 @@ PERIPH_CLK(pcie_xclk, NULL, "pcie_xclk", 74, 0, 26000000, mux_clk_m, static struct clk *tegra_list_clks[] = { &tegra_apbdma, &tegra_rtc, + &tegra_timer, &tegra_i2s1, &tegra_i2s2, &tegra_spdif_out, diff --git a/arch/arm/mach-tegra/tegra30_clocks.c b/arch/arm/mach-tegra/tegra30_clocks.c index 5cd502c27163..e9de5dfd94ec 100644 --- a/arch/arm/mach-tegra/tegra30_clocks.c +++ b/arch/arm/mach-tegra/tegra30_clocks.c @@ -1199,7 +1199,7 @@ static long tegra30_pll_round_rate(struct clk_hw *hw, unsigned long rate, { struct clk_tegra *c = to_clk_tegra(hw); unsigned long input_rate = *prate; - unsigned long output_rate = *prate; + u64 output_rate = *prate; const struct clk_pll_freq_table *sel; struct clk_pll_freq_table cfg; int mul; diff --git a/arch/arm/mach-tegra/tegra30_clocks_data.c b/arch/arm/mach-tegra/tegra30_clocks_data.c index d92cb556ae35..3d2e5532a9ea 100644 --- a/arch/arm/mach-tegra/tegra30_clocks_data.c +++ b/arch/arm/mach-tegra/tegra30_clocks_data.c @@ -1143,6 +1143,7 @@ struct clk *tegra_list_clks[] = { &tegra_apbdma, &tegra_rtc, &tegra_kbc, + &tegra_timer, &tegra_kfuse, &tegra_fuse, &tegra_fuse_burn, diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c index eccdce983043..d3b8c8e7368f 100644 --- a/arch/arm/mach-tegra/timer.c +++ b/arch/arm/mach-tegra/timer.c @@ -245,7 +245,7 @@ static void __init tegra_init_timer(void) register_persistent_clock(NULL, tegra_read_persistent_clock); } -struct sys_timer tegra_timer = { +struct sys_timer tegra_sys_timer = { .init = tegra_init_timer, }; diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index b8efac4daed8..ece8a2dfb814 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -1445,8 +1445,6 @@ static struct platform_device pinctrl_device = { static struct u300_gpio_platform u300_gpio_plat = { .ports = 7, .gpio_base = 0, - .gpio_irq_base = IRQ_U300_GPIO_BASE, - .pinctrl_device = &pinctrl_device, }; static struct platform_device gpio_device = { @@ -1590,6 +1588,7 @@ static struct platform_device *platform_devs[] __initdata = { &i2c1_device, &keypad_device, &rtc_device, + &pinctrl_device, &gpio_device, &nand_device, &wdog_device, @@ -1804,7 +1803,7 @@ MACHINE_START(U300, "Ericsson AB U335 S335/B335 Prototype Board") /* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */ .atag_offset = 0x100, .map_io = u300_map_io, - .nr_irqs = NR_IRQS_U300, + .nr_irqs = 0, .init_irq = u300_init_irq, .handle_irq = vic_handle_irq, .timer = &u300_timer, diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h index e27425a63fa1..21d5e76a6cd3 100644 --- a/arch/arm/mach-u300/include/mach/irqs.h +++ b/arch/arm/mach-u300/include/mach/irqs.h @@ -12,79 +12,69 @@ #ifndef __MACH_IRQS_H #define __MACH_IRQS_H -#define IRQ_U300_INTCON0_START 1 -#define IRQ_U300_INTCON1_START 33 +#define IRQ_U300_INTCON0_START 32 +#define IRQ_U300_INTCON1_START 64 /* These are on INTCON0 - 30 lines */ -#define IRQ_U300_IRQ0_EXT 1 -#define IRQ_U300_IRQ1_EXT 2 -#define IRQ_U300_DMA 3 -#define IRQ_U300_VIDEO_ENC_0 4 -#define IRQ_U300_VIDEO_ENC_1 5 -#define IRQ_U300_AAIF_RX 6 -#define IRQ_U300_AAIF_TX 7 -#define IRQ_U300_AAIF_VGPIO 8 -#define IRQ_U300_AAIF_WAKEUP 9 -#define IRQ_U300_PCM_I2S0_FRAME 10 -#define IRQ_U300_PCM_I2S0_FIFO 11 -#define IRQ_U300_PCM_I2S1_FRAME 12 -#define IRQ_U300_PCM_I2S1_FIFO 13 -#define IRQ_U300_XGAM_GAMCON 14 -#define IRQ_U300_XGAM_CDI 15 -#define IRQ_U300_XGAM_CDICON 16 -#define IRQ_U300_XGAM_PDI 18 -#define IRQ_U300_XGAM_PDICON 19 -#define IRQ_U300_XGAM_GAMEACC 20 -#define IRQ_U300_XGAM_MCIDCT 21 -#define IRQ_U300_APEX 22 -#define IRQ_U300_UART0 23 -#define IRQ_U300_SPI 24 -#define IRQ_U300_TIMER_APP_OS 25 -#define IRQ_U300_TIMER_APP_DD 26 -#define IRQ_U300_TIMER_APP_GP1 27 -#define IRQ_U300_TIMER_APP_GP2 28 -#define IRQ_U300_TIMER_OS 29 -#define IRQ_U300_TIMER_MS 30 -#define IRQ_U300_KEYPAD_KEYBF 31 -#define IRQ_U300_KEYPAD_KEYBR 32 +#define IRQ_U300_IRQ0_EXT 32 +#define IRQ_U300_IRQ1_EXT 33 +#define IRQ_U300_DMA 34 +#define IRQ_U300_VIDEO_ENC_0 35 +#define IRQ_U300_VIDEO_ENC_1 36 +#define IRQ_U300_AAIF_RX 37 +#define IRQ_U300_AAIF_TX 38 +#define IRQ_U300_AAIF_VGPIO 39 +#define IRQ_U300_AAIF_WAKEUP 40 +#define IRQ_U300_PCM_I2S0_FRAME 41 +#define IRQ_U300_PCM_I2S0_FIFO 42 +#define IRQ_U300_PCM_I2S1_FRAME 43 +#define IRQ_U300_PCM_I2S1_FIFO 44 +#define IRQ_U300_XGAM_GAMCON 45 +#define IRQ_U300_XGAM_CDI 46 +#define IRQ_U300_XGAM_CDICON 47 +#define IRQ_U300_XGAM_PDI 49 +#define IRQ_U300_XGAM_PDICON 50 +#define IRQ_U300_XGAM_GAMEACC 51 +#define IRQ_U300_XGAM_MCIDCT 52 +#define IRQ_U300_APEX 53 +#define IRQ_U300_UART0 54 +#define IRQ_U300_SPI 55 +#define IRQ_U300_TIMER_APP_OS 56 +#define IRQ_U300_TIMER_APP_DD 57 +#define IRQ_U300_TIMER_APP_GP1 58 +#define IRQ_U300_TIMER_APP_GP2 59 +#define IRQ_U300_TIMER_OS 60 +#define IRQ_U300_TIMER_MS 61 +#define IRQ_U300_KEYPAD_KEYBF 62 +#define IRQ_U300_KEYPAD_KEYBR 63 /* These are on INTCON1 - 32 lines */ -#define IRQ_U300_GPIO_PORT0 33 -#define IRQ_U300_GPIO_PORT1 34 -#define IRQ_U300_GPIO_PORT2 35 +#define IRQ_U300_GPIO_PORT0 64 +#define IRQ_U300_GPIO_PORT1 65 +#define IRQ_U300_GPIO_PORT2 66 /* These are for DB3150, DB3200 and DB3350 */ -#define IRQ_U300_WDOG 36 -#define IRQ_U300_EVHIST 37 -#define IRQ_U300_MSPRO 38 -#define IRQ_U300_MMCSD_MCIINTR0 39 -#define IRQ_U300_MMCSD_MCIINTR1 40 -#define IRQ_U300_I2C0 41 -#define IRQ_U300_I2C1 42 -#define IRQ_U300_RTC 43 -#define IRQ_U300_NFIF 44 -#define IRQ_U300_NFIF2 45 +#define IRQ_U300_WDOG 67 +#define IRQ_U300_EVHIST 68 +#define IRQ_U300_MSPRO 69 +#define IRQ_U300_MMCSD_MCIINTR0 70 +#define IRQ_U300_MMCSD_MCIINTR1 71 +#define IRQ_U300_I2C0 72 +#define IRQ_U300_I2C1 73 +#define IRQ_U300_RTC 74 +#define IRQ_U300_NFIF 75 +#define IRQ_U300_NFIF2 76 /* The DB3350-specific interrupt lines */ -#define IRQ_U300_ISP_F0 46 -#define IRQ_U300_ISP_F1 47 -#define IRQ_U300_ISP_F2 48 -#define IRQ_U300_ISP_F3 49 -#define IRQ_U300_ISP_F4 50 -#define IRQ_U300_GPIO_PORT3 51 -#define IRQ_U300_SYSCON_PLL_LOCK 52 -#define IRQ_U300_UART1 53 -#define IRQ_U300_GPIO_PORT4 54 -#define IRQ_U300_GPIO_PORT5 55 -#define IRQ_U300_GPIO_PORT6 56 -#define U300_VIC_IRQS_END 57 - -/* Maximum 8*7 GPIO lines */ -#ifdef CONFIG_PINCTRL_COH901 -#define IRQ_U300_GPIO_BASE (U300_VIC_IRQS_END) -#define IRQ_U300_GPIO_END (IRQ_U300_GPIO_BASE + 56) -#else -#define IRQ_U300_GPIO_END (U300_VIC_IRQS_END) -#endif - -#define NR_IRQS_U300 (IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START) +#define IRQ_U300_ISP_F0 77 +#define IRQ_U300_ISP_F1 78 +#define IRQ_U300_ISP_F2 79 +#define IRQ_U300_ISP_F3 80 +#define IRQ_U300_ISP_F4 81 +#define IRQ_U300_GPIO_PORT3 82 +#define IRQ_U300_SYSCON_PLL_LOCK 83 +#define IRQ_U300_UART1 84 +#define IRQ_U300_GPIO_PORT4 85 +#define IRQ_U300_GPIO_PORT5 86 +#define IRQ_U300_GPIO_PORT6 87 +#define U300_VIC_IRQS_END 88 #endif diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c index 070629a95625..33631c9f1218 100644 --- a/arch/arm/mach-ux500/board-mop500-audio.c +++ b/arch/arm/mach-ux500/board-mop500-audio.c @@ -7,9 +7,8 @@ #include <linux/platform_device.h> #include <linux/init.h> #include <linux/gpio.h> +#include <linux/platform_data/pinctrl-nomadik.h> -#include <plat/gpio-nomadik.h> -#include <plat/pincfg.h> #include <plat/ste_dma40.h> #include <mach/devices.h> diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index a267c6d30e37..c34d4efd0d5c 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -9,10 +9,9 @@ #include <linux/bug.h> #include <linux/string.h> #include <linux/pinctrl/machine.h> +#include <linux/platform_data/pinctrl-nomadik.h> #include <asm/mach-types.h> -#include <plat/pincfg.h> -#include <plat/gpio-nomadik.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 416d436111f2..0a3dd601a400 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -37,13 +37,13 @@ #include <linux/of_platform.h> #include <linux/leds.h> #include <linux/pinctrl/consumer.h> +#include <linux/platform_data/pinctrl-nomadik.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> #include <plat/ste_dma40.h> -#include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/setup.h> diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index bcdfe6b1d453..91f028c1264a 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -17,14 +17,14 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/mfd/abx500/ab8500.h> +#include <linux/platform_data/usb-musb-ux500.h> +#include <linux/platform_data/pinctrl-nomadik.h> #include <asm/pmu.h> #include <asm/mach/map.h> -#include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/setup.h> #include <mach/devices.h> -#include <linux/platform_data/usb-musb-ux500.h> #include <mach/db8500-regs.h> #include "devices-db8500.h" @@ -158,7 +158,7 @@ static void __init db8500_add_gpios(struct device *parent) dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base), IRQ_DB8500_GPIO0, &pdata); - dbx500_add_pinctrl(parent, "pinctrl-db8500"); + dbx500_add_pinctrl(parent, "pinctrl-db8500", U8500_PRCMU_BASE); } static int usb_db8500_rx_dma_cfg[] = { @@ -214,9 +214,6 @@ struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500) db8500_add_gpios(parent); db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); - platform_device_register_data(parent, - "cpufreq-u8500", -1, NULL, 0); - for (i = 0; i < ARRAY_SIZE(platform_devs); i++) platform_devs[i]->dev.parent = parent; @@ -236,9 +233,6 @@ struct device * __init u8500_of_init_devices(void) db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); - platform_device_register_data(parent, - "cpufreq-u8500", -1, NULL, 0); - u8500_dma40_device.dev.parent = parent; /* diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 2236cbd03cd7..1f3fbc2bb776 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -16,6 +16,7 @@ #include <linux/stat.h> #include <linux/of.h> #include <linux/of_irq.h> +#include <linux/irq.h> #include <linux/platform_data/clk-ux500.h> #include <asm/hardware/gic.h> diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c index dfdd4a54668d..692a77a1c153 100644 --- a/arch/arm/mach-ux500/devices-common.c +++ b/arch/arm/mach-ux500/devices-common.c @@ -11,8 +11,7 @@ #include <linux/irq.h> #include <linux/slab.h> #include <linux/platform_device.h> - -#include <plat/gpio-nomadik.h> +#include <linux/platform_data/pinctrl-nomadik.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h index 7fbf0ba336e1..96fa4ac89e2e 100644 --- a/arch/arm/mach-ux500/devices-common.h +++ b/arch/arm/mach-ux500/devices-common.h @@ -129,12 +129,18 @@ void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num, int irq, struct nmk_gpio_platform_data *pdata); static inline void -dbx500_add_pinctrl(struct device *parent, const char *name) +dbx500_add_pinctrl(struct device *parent, const char *name, + resource_size_t base) { + struct resource res[] = { + DEFINE_RES_MEM(base, SZ_8K), + }; struct platform_device_info pdevinfo = { .parent = parent, .name = name, .id = -1, + .res = res, + .num_res = ARRAY_SIZE(res), }; platform_device_register_full(&pdevinfo); diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 560e0df728f8..359f782c747d 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -589,7 +589,7 @@ void __init v2m_dt_init_early(void) return; /* Confirm board type against DT property, if available */ - if (of_property_read_u32(allnodes, "arm,hbi", &dt_hbi) == 0) { + if (of_property_read_u32(of_allnodes, "arm,hbi", &dt_hbi) == 0) { int site = v2m_get_master_site(); u32 id = readl(v2m_sysreg_base + (site == SYS_CFG_SITE_DB2 ? V2M_SYS_PROCID1 : V2M_SYS_PROCID0)); diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index b9f60ebe3bc4..b820edaf3184 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -745,7 +745,7 @@ do_alignment_t32_to_handler(unsigned long *pinstr, struct pt_regs *regs, static int do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) { - union offset_union offset; + union offset_union uninitialized_var(offset); unsigned long instr = 0, instrptr; int (*handler)(unsigned long addr, unsigned long instr, struct pt_regs *regs); unsigned int type; @@ -856,8 +856,10 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) if (thumb2_32b) { offset.un = 0; handler = do_alignment_t32_to_handler(&instr, regs, &offset); - } else + } else { + offset.un = 0; handler = do_alignment_ldmstm; + } break; default: diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 477a2d23ddf1..58bc3e4d3bd0 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -610,7 +610,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, pgprot_t prot, bool is_coherent, const void *caller) { u64 mask = get_coherent_dma_mask(dev); - struct page *page; + struct page *page = NULL; void *addr; #ifdef CONFIG_DMA_API_DEBUG diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 86b8b480634f..09c5233f4dfc 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -89,7 +89,7 @@ ENTRY(cpu_v6_dcache_clean_area) mov pc, lr /* - * cpu_arm926_switch_mm(pgd_phys, tsk) + * cpu_v6_switch_mm(pgd_phys, tsk) * * Set the translation table base pointer to be pgd_phys * diff --git a/arch/arm/mm/vmregion.h b/arch/arm/mm/vmregion.h index bf312c354a21..0f5a5f2a2c7b 100644 --- a/arch/arm/mm/vmregion.h +++ b/arch/arm/mm/vmregion.h @@ -17,7 +17,6 @@ struct arm_vmregion { struct list_head vm_list; unsigned long vm_start; unsigned long vm_end; - void *priv; int vm_active; const void *caller; }; diff --git a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c b/arch/arm/plat-mxc/devices/platform-mxc-mmc.c index 540d3a7d92df..e7b920b58675 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c +++ b/arch/arm/plat-mxc/devices/platform-mxc-mmc.c @@ -55,7 +55,7 @@ struct platform_device *__init imx_add_mxc_mmc( struct resource res[] = { { .start = data->iobase, - .end = data->iobase + SZ_4K - 1, + .end = data->iobase + data->iosize - 1, .flags = IORESOURCE_MEM, }, { .start = data->irq, diff --git a/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h b/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h deleted file mode 100644 index c08a54d9d889..000000000000 --- a/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - * Structures and registers for GPIO access in the Nomadik SoC - * - * Copyright (C) 2008 STMicroelectronics - * Author: Prafulla WADASKAR <prafulla.wadaskar@st.com> - * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __PLAT_NOMADIK_GPIO -#define __PLAT_NOMADIK_GPIO - -/* - * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving - * the "gpio" namespace for generic and cross-machine functions - */ - -/* Register in the logic block */ -#define NMK_GPIO_DAT 0x00 -#define NMK_GPIO_DATS 0x04 -#define NMK_GPIO_DATC 0x08 -#define NMK_GPIO_PDIS 0x0c -#define NMK_GPIO_DIR 0x10 -#define NMK_GPIO_DIRS 0x14 -#define NMK_GPIO_DIRC 0x18 -#define NMK_GPIO_SLPC 0x1c -#define NMK_GPIO_AFSLA 0x20 -#define NMK_GPIO_AFSLB 0x24 -#define NMK_GPIO_LOWEMI 0x28 - -#define NMK_GPIO_RIMSC 0x40 -#define NMK_GPIO_FIMSC 0x44 -#define NMK_GPIO_IS 0x48 -#define NMK_GPIO_IC 0x4c -#define NMK_GPIO_RWIMSC 0x50 -#define NMK_GPIO_FWIMSC 0x54 -#define NMK_GPIO_WKS 0x58 - -/* Alternate functions: function C is set in hw by setting both A and B */ -#define NMK_GPIO_ALT_GPIO 0 -#define NMK_GPIO_ALT_A 1 -#define NMK_GPIO_ALT_B 2 -#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B) - -#define NMK_GPIO_ALT_CX_SHIFT 2 -#define NMK_GPIO_ALT_C1 ((1<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) -#define NMK_GPIO_ALT_C2 ((2<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) -#define NMK_GPIO_ALT_C3 ((3<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) -#define NMK_GPIO_ALT_C4 ((4<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) - -/* Pull up/down values */ -enum nmk_gpio_pull { - NMK_GPIO_PULL_NONE, - NMK_GPIO_PULL_UP, - NMK_GPIO_PULL_DOWN, -}; - -/* Sleep mode */ -enum nmk_gpio_slpm { - NMK_GPIO_SLPM_INPUT, - NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT, - NMK_GPIO_SLPM_NOCHANGE, - NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE, -}; - -extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode); -extern int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull); -#ifdef CONFIG_PINCTRL_NOMADIK -extern int nmk_gpio_set_mode(int gpio, int gpio_mode); -#else -static inline int nmk_gpio_set_mode(int gpio, int gpio_mode) -{ - return -ENODEV; -} -#endif -extern int nmk_gpio_get_mode(int gpio); - -extern void nmk_gpio_wakeups_suspend(void); -extern void nmk_gpio_wakeups_resume(void); - -extern void nmk_gpio_clocks_enable(void); -extern void nmk_gpio_clocks_disable(void); - -extern void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up); - -/* - * Platform data to register a block: only the initial gpio/irq number. - */ -struct nmk_gpio_platform_data { - char *name; - int first_gpio; - int first_irq; - int num_gpio; - u32 (*get_secondary_status)(unsigned int bank); - void (*set_ioforce)(bool enable); - bool supports_sleepmode; -}; - -#endif /* __PLAT_NOMADIK_GPIO */ diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h deleted file mode 100644 index 3b8ec60af351..000000000000 --- a/arch/arm/plat-nomadik/include/plat/pincfg.h +++ /dev/null @@ -1,173 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License, version 2 - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * - * Based on arch/arm/mach-pxa/include/mach/mfp.h: - * Copyright (C) 2007 Marvell International Ltd. - * eric miao <eric.miao@marvell.com> - */ - -#ifndef __PLAT_PINCFG_H -#define __PLAT_PINCFG_H - -/* - * pin configurations are represented by 32-bit integers: - * - * bit 0.. 8 - Pin Number (512 Pins Maximum) - * bit 9..10 - Alternate Function Selection - * bit 11..12 - Pull up/down state - * bit 13 - Sleep mode behaviour - * bit 14 - Direction - * bit 15 - Value (if output) - * bit 16..18 - SLPM pull up/down state - * bit 19..20 - SLPM direction - * bit 21..22 - SLPM Value (if output) - * bit 23..25 - PDIS value (if input) - * bit 26 - Gpio mode - * bit 27 - Sleep mode - * - * to facilitate the definition, the following macros are provided - * - * PIN_CFG_DEFAULT - default config (0): - * pull up/down = disabled - * sleep mode = input/wakeup - * direction = input - * value = low - * SLPM direction = same as normal - * SLPM pull = same as normal - * SLPM value = same as normal - * - * PIN_CFG - default config with alternate function - */ - -typedef unsigned long pin_cfg_t; - -#define PIN_NUM_MASK 0x1ff -#define PIN_NUM(x) ((x) & PIN_NUM_MASK) - -#define PIN_ALT_SHIFT 9 -#define PIN_ALT_MASK (0x3 << PIN_ALT_SHIFT) -#define PIN_ALT(x) (((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT) -#define PIN_GPIO (NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT) -#define PIN_ALT_A (NMK_GPIO_ALT_A << PIN_ALT_SHIFT) -#define PIN_ALT_B (NMK_GPIO_ALT_B << PIN_ALT_SHIFT) -#define PIN_ALT_C (NMK_GPIO_ALT_C << PIN_ALT_SHIFT) - -#define PIN_PULL_SHIFT 11 -#define PIN_PULL_MASK (0x3 << PIN_PULL_SHIFT) -#define PIN_PULL(x) (((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT) -#define PIN_PULL_NONE (NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT) -#define PIN_PULL_UP (NMK_GPIO_PULL_UP << PIN_PULL_SHIFT) -#define PIN_PULL_DOWN (NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT) - -#define PIN_SLPM_SHIFT 13 -#define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT) -#define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT) -#define PIN_SLPM_MAKE_INPUT (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT) -#define PIN_SLPM_NOCHANGE (NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT) -/* These two replace the above in DB8500v2+ */ -#define PIN_SLPM_WAKEUP_ENABLE (NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT) -#define PIN_SLPM_WAKEUP_DISABLE (NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT) -#define PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP PIN_SLPM_WAKEUP_DISABLE - -#define PIN_SLPM_GPIO PIN_SLPM_WAKEUP_ENABLE /* In SLPM, pin is a gpio */ -#define PIN_SLPM_ALTFUNC PIN_SLPM_WAKEUP_DISABLE /* In SLPM, pin is altfunc */ - -#define PIN_DIR_SHIFT 14 -#define PIN_DIR_MASK (0x1 << PIN_DIR_SHIFT) -#define PIN_DIR(x) (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT) -#define PIN_DIR_INPUT (0 << PIN_DIR_SHIFT) -#define PIN_DIR_OUTPUT (1 << PIN_DIR_SHIFT) - -#define PIN_VAL_SHIFT 15 -#define PIN_VAL_MASK (0x1 << PIN_VAL_SHIFT) -#define PIN_VAL(x) (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT) -#define PIN_VAL_LOW (0 << PIN_VAL_SHIFT) -#define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT) - -#define PIN_SLPM_PULL_SHIFT 16 -#define PIN_SLPM_PULL_MASK (0x7 << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL(x) \ - (((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_NONE \ - ((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_UP \ - ((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_DOWN \ - ((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT) - -#define PIN_SLPM_DIR_SHIFT 19 -#define PIN_SLPM_DIR_MASK (0x3 << PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR(x) \ - (((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR_INPUT ((1 + 0) << PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR_OUTPUT ((1 + 1) << PIN_SLPM_DIR_SHIFT) - -#define PIN_SLPM_VAL_SHIFT 21 -#define PIN_SLPM_VAL_MASK (0x3 << PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL(x) \ - (((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL_LOW ((1 + 0) << PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL_HIGH ((1 + 1) << PIN_SLPM_VAL_SHIFT) - -#define PIN_SLPM_PDIS_SHIFT 23 -#define PIN_SLPM_PDIS_MASK (0x3 << PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS(x) \ - (((x) & PIN_SLPM_PDIS_MASK) >> PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS_NO_CHANGE (0 << PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS_DISABLED (1 << PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS_ENABLED (2 << PIN_SLPM_PDIS_SHIFT) - -#define PIN_LOWEMI_SHIFT 25 -#define PIN_LOWEMI_MASK (0x1 << PIN_LOWEMI_SHIFT) -#define PIN_LOWEMI(x) (((x) & PIN_LOWEMI_MASK) >> PIN_LOWEMI_SHIFT) -#define PIN_LOWEMI_DISABLED (0 << PIN_LOWEMI_SHIFT) -#define PIN_LOWEMI_ENABLED (1 << PIN_LOWEMI_SHIFT) - -#define PIN_GPIOMODE_SHIFT 26 -#define PIN_GPIOMODE_MASK (0x1 << PIN_GPIOMODE_SHIFT) -#define PIN_GPIOMODE(x) (((x) & PIN_GPIOMODE_MASK) >> PIN_GPIOMODE_SHIFT) -#define PIN_GPIOMODE_DISABLED (0 << PIN_GPIOMODE_SHIFT) -#define PIN_GPIOMODE_ENABLED (1 << PIN_GPIOMODE_SHIFT) - -#define PIN_SLEEPMODE_SHIFT 27 -#define PIN_SLEEPMODE_MASK (0x1 << PIN_SLEEPMODE_SHIFT) -#define PIN_SLEEPMODE(x) (((x) & PIN_SLEEPMODE_MASK) >> PIN_SLEEPMODE_SHIFT) -#define PIN_SLEEPMODE_DISABLED (0 << PIN_SLEEPMODE_SHIFT) -#define PIN_SLEEPMODE_ENABLED (1 << PIN_SLEEPMODE_SHIFT) - - -/* Shortcuts. Use these instead of separate DIR, PULL, and VAL. */ -#define PIN_INPUT_PULLDOWN (PIN_DIR_INPUT | PIN_PULL_DOWN) -#define PIN_INPUT_PULLUP (PIN_DIR_INPUT | PIN_PULL_UP) -#define PIN_INPUT_NOPULL (PIN_DIR_INPUT | PIN_PULL_NONE) -#define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW) -#define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH) - -#define PIN_SLPM_INPUT_PULLDOWN (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN) -#define PIN_SLPM_INPUT_PULLUP (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP) -#define PIN_SLPM_INPUT_NOPULL (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE) -#define PIN_SLPM_OUTPUT_LOW (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW) -#define PIN_SLPM_OUTPUT_HIGH (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH) - -#define PIN_CFG_DEFAULT (0) - -#define PIN_CFG(num, alt) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt)) - -#define PIN_CFG_INPUT(num, alt, pull) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull)) - -#define PIN_CFG_OUTPUT(num, alt, val) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val)) - -extern int nmk_config_pin(pin_cfg_t cfg, bool sleep); -extern int nmk_config_pins(pin_cfg_t *cfgs, int num); -extern int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num); - -#endif diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 7cd56ed5cd94..82fcb206b5b2 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -26,6 +26,7 @@ config ARCH_OMAP2PLUS select CLKDEV_LOOKUP select GENERIC_IRQ_CHIP select OMAP_DM_TIMER + select PINCTRL select PROC_DEVICETREE if PROC_FS select SPARSE_IRQ select USE_OF diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c index c7a4c0902b38..5a4678edd65a 100644 --- a/arch/arm/plat-omap/debug-devices.c +++ b/arch/arm/plat-omap/debug-devices.c @@ -16,6 +16,7 @@ #include <linux/smc91x.h> #include <mach/hardware.h> +#include "../mach-omap2/debug-devices.h" /* Many OMAP development platforms reuse the same "debug board"; these * platforms include H2, H3, H4, and Perseus2. diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index a5683a84c6ee..6013831a043e 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -26,12 +26,14 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/i2c.h> +#include <linux/i2c-omap.h> #include <linux/slab.h> #include <linux/err.h> #include <linux/clk.h> #include <mach/irqs.h> #include <plat/i2c.h> +#include <plat/omap-pm.h> #include <plat/omap_device.h> #define OMAP_I2C_SIZE 0x3f @@ -127,6 +129,16 @@ static inline int omap1_i2c_add_bus(int bus_id) #ifdef CONFIG_ARCH_OMAP2PLUS +/* + * XXX This function is a temporary compatibility wrapper - only + * needed until the I2C driver can be converted to call + * omap_pm_set_max_dev_wakeup_lat() and handle a return code. + */ +static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t) +{ + omap_pm_set_max_mpu_wakeup_lat(dev, t); +} + static inline int omap2_i2c_add_bus(int bus_id) { int l; @@ -158,6 +170,15 @@ static inline int omap2_i2c_add_bus(int bus_id) dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr; pdata->flags = dev_attr->flags; + /* + * When waiting for completion of a i2c transfer, we need to + * set a wake up latency constraint for the MPU. This is to + * ensure quick enough wakeup from idle, when transfer + * completes. + * Only omap3 has support for constraints + */ + if (cpu_is_omap34xx()) + pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat; pdev = omap_device_build(name, bus_id, oh, pdata, sizeof(struct omap_i2c_bus_platform_data), NULL, 0, 0); diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index 8b4e4f2da2f5..346af5b490be 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -126,6 +126,7 @@ struct omap_mmc_platform_data { /* we can put the features above into this variable */ #define HSMMC_HAS_PBIAS (1 << 0) #define HSMMC_HAS_UPDATED_RESET (1 << 1) +#define HSMMC_HAS_HSPE_SUPPORT (1 << 2) unsigned features; int switch_pin; /* gpio (card detect) */ diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index f4a4cd014795..1957a8516e93 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -40,10 +40,10 @@ #define OMAP_UART_WER_MOD_WKUP 0X7F /* Enable XON/XOFF flow control on output */ -#define OMAP_UART_SW_TX 0x8 +#define OMAP_UART_SW_TX 0x04 /* Enable XON/XOFF flow control on input */ -#define OMAP_UART_SW_RX 0x2 +#define OMAP_UART_SW_RX 0x04 #define OMAP_UART_SYSC_RESET 0X07 #define OMAP_UART_TCR_TRIG 0X0F diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index b3349f7b1a2c..1db029438022 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -443,6 +443,11 @@ struct omap_hwmod_omap4_prcm { * in order to complete the reset. Optional clocks will be disabled * again after the reset. * HWMOD_16BIT_REG: Module has 16bit registers + * HWMOD_EXT_OPT_MAIN_CLK: The only main functional clock source for + * this IP block comes from an off-chip source and is not always + * enabled. This prevents the hwmod code from being able to + * enable and reset the IP block early. XXX Eventually it should + * be possible to query the clock framework for this information. */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) @@ -453,6 +458,7 @@ struct omap_hwmod_omap4_prcm { #define HWMOD_NO_IDLEST (1 << 6) #define HWMOD_CONTROL_OPT_CLKS_IN_RESET (1 << 7) #define HWMOD_16BIT_REG (1 << 8) +#define HWMOD_EXT_OPT_MAIN_CLK (1 << 9) /* * omap_hwmod._int_flags definitions diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index db98e7021f0d..0abd1c469887 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -473,12 +473,13 @@ int s3c2410_dma_enqueue(enum dma_ch channel, void *id, pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n", chan->number, __func__, buf); - if (chan->end == NULL) + if (chan->end == NULL) { pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n", chan->number, __func__, chan); - - chan->end->next = buf; - chan->end = buf; + } else { + chan->end->next = buf; + chan->end = buf; + } } /* if necessary, update the next buffer field */ diff --git a/arch/arm/plat-samsung/include/plat/spi-core.h b/arch/arm/plat-samsung/include/plat/spi-core.h new file mode 100644 index 000000000000..0b9428ab3fc3 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/spi-core.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2012 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __PLAT_S3C_SPI_CORE_H +#define __PLAT_S3C_SPI_CORE_H + +/* These functions are only for use with the core support code, such as + * the cpu specific initialisation code + */ + +/* re-define device name depending on support. */ +static inline void s3c64xx_spi_setname(char *name) +{ +#ifdef CONFIG_S3C64XX_DEV_SPI0 + s3c64xx_device_spi0.name = name; +#endif +#ifdef CONFIG_S3C64XX_DEV_SPI1 + s3c64xx_device_spi1.name = name; +#endif +#ifdef CONFIG_S3C64XX_DEV_SPI2 + s3c64xx_device_spi2.name = name; +#endif +} + +#endif /* __PLAT_S3C_SPI_CORE_H */ diff --git a/arch/arm/tools/Makefile b/arch/arm/tools/Makefile index 635cb1865e4d..32d05c8219dc 100644 --- a/arch/arm/tools/Makefile +++ b/arch/arm/tools/Makefile @@ -5,6 +5,6 @@ # include/generated/mach-types.h: $(src)/gen-mach-types $(src)/mach-types - @echo ' Generating $@' + @$(kecho) ' Generating $@' @mkdir -p $(dir $@) $(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; } diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index c834b32af275..3b44e0dd0a93 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -701,11 +701,14 @@ static int __init vfp_init(void) elf_hwcap |= HWCAP_VFPv3; /* - * Check for VFPv3 D16. CPUs in this configuration - * only have 16 x 64bit registers. + * Check for VFPv3 D16 and VFPv4 D16. CPUs in + * this configuration only have 16 x 64bit + * registers. */ if (((fmrx(MVFR0) & MVFR0_A_SIMD_MASK)) == 1) - elf_hwcap |= HWCAP_VFPv3D16; + elf_hwcap |= HWCAP_VFPv3D16; /* also v4-D16 */ + else + elf_hwcap |= HWCAP_VFPD32; } #endif /* diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index 59bcb96ac369..f57609275449 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -166,3 +166,14 @@ void free_xenballooned_pages(int nr_pages, struct page **pages) *pages = NULL; } EXPORT_SYMBOL_GPL(free_xenballooned_pages); + +/* In the hypervisor.S file. */ +EXPORT_SYMBOL_GPL(HYPERVISOR_event_channel_op); +EXPORT_SYMBOL_GPL(HYPERVISOR_grant_table_op); +EXPORT_SYMBOL_GPL(HYPERVISOR_xen_version); +EXPORT_SYMBOL_GPL(HYPERVISOR_console_io); +EXPORT_SYMBOL_GPL(HYPERVISOR_sched_op); +EXPORT_SYMBOL_GPL(HYPERVISOR_hvm_op); +EXPORT_SYMBOL_GPL(HYPERVISOR_memory_op); +EXPORT_SYMBOL_GPL(HYPERVISOR_physdev_op); +EXPORT_SYMBOL_GPL(privcmd_call); diff --git a/arch/arm/xen/grant-table.c b/arch/arm/xen/grant-table.c index dbd1330c0196..859a9bb002d5 100644 --- a/arch/arm/xen/grant-table.c +++ b/arch/arm/xen/grant-table.c @@ -33,7 +33,7 @@ #include <xen/page.h> #include <xen/grant_table.h> -int arch_gnttab_map_shared(unsigned long *frames, unsigned long nr_gframes, +int arch_gnttab_map_shared(xen_pfn_t *frames, unsigned long nr_gframes, unsigned long max_nr_gframes, void **__shared) { diff --git a/arch/arm/xen/hypercall.S b/arch/arm/xen/hypercall.S index 074f5ed101b9..71f723984cbd 100644 --- a/arch/arm/xen/hypercall.S +++ b/arch/arm/xen/hypercall.S @@ -48,20 +48,16 @@ #include <linux/linkage.h> #include <asm/assembler.h> +#include <asm/opcodes-virt.h> #include <xen/interface/xen.h> -/* HVC 0xEA1 */ -#ifdef CONFIG_THUMB2_KERNEL -#define xen_hvc .word 0xf7e08ea1 -#else -#define xen_hvc .word 0xe140ea71 -#endif +#define XEN_IMM 0xEA1 #define HYPERCALL_SIMPLE(hypercall) \ ENTRY(HYPERVISOR_##hypercall) \ mov r12, #__HYPERVISOR_##hypercall; \ - xen_hvc; \ + __HVC(XEN_IMM); \ mov pc, lr; \ ENDPROC(HYPERVISOR_##hypercall) @@ -76,7 +72,7 @@ ENTRY(HYPERVISOR_##hypercall) \ stmdb sp!, {r4} \ ldr r4, [sp, #4] \ mov r12, #__HYPERVISOR_##hypercall; \ - xen_hvc \ + __HVC(XEN_IMM); \ ldm sp!, {r4} \ mov pc, lr \ ENDPROC(HYPERVISOR_##hypercall) @@ -100,7 +96,7 @@ ENTRY(privcmd_call) mov r2, r3 ldr r3, [sp, #8] ldr r4, [sp, #4] - xen_hvc + __HVC(XEN_IMM) ldm sp!, {r4} mov pc, lr ENDPROC(privcmd_call); |