summaryrefslogtreecommitdiff
path: root/arch/blackfin/mach-bf527/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/mach-bf527/Kconfig')
-rw-r--r--arch/blackfin/mach-bf527/Kconfig325
1 files changed, 0 insertions, 325 deletions
diff --git a/arch/blackfin/mach-bf527/Kconfig b/arch/blackfin/mach-bf527/Kconfig
deleted file mode 100644
index 6df20f9c7bd4..000000000000
--- a/arch/blackfin/mach-bf527/Kconfig
+++ /dev/null
@@ -1,325 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-config BF52x
- def_bool y
- depends on (BF522 || BF523 || BF524 || BF525 || BF526 || BF527)
-
-if (BF52x)
-
-source "arch/blackfin/mach-bf527/boards/Kconfig"
-
-menu "BF527 Specific Configuration"
-
-comment "Alternative Multiplexing Scheme"
-
-choice
- prompt "SPORT0"
- default BF527_SPORT0_PORTG
- help
- Select PORT used for SPORT0. See Hardware Reference Manual
-
-config BF527_SPORT0_PORTF
- bool "PORT F"
- help
- PORT F
-
-config BF527_SPORT0_PORTG
- bool "PORT G"
- help
- PORT G
-endchoice
-
-choice
- prompt "SPORT0 TSCLK Location"
- depends on BF527_SPORT0_PORTG
- default BF527_SPORT0_TSCLK_PG10
- help
- Select PIN used for SPORT0_TSCLK. See Hardware Reference Manual
-
-config BF527_SPORT0_TSCLK_PG10
- bool "PORT PG10"
- help
- PORT PG10
-
-config BF527_SPORT0_TSCLK_PG14
- bool "PORT PG14"
- help
- PORT PG14
-endchoice
-
-choice
- prompt "UART1"
- default BF527_UART1_PORTF
- help
- Select PORT used for UART1. See Hardware Reference Manual
-
-config BF527_UART1_PORTF
- bool "PORT F"
- help
- PORT F
-
-config BF527_UART1_PORTG
- bool "PORT G"
- help
- PORT G
-endchoice
-
-choice
- prompt "NAND (NFC) Data"
- default BF527_NAND_D_PORTH
- help
- Select PORT used for NAND Data Bus. See Hardware Reference Manual
-
-config BF527_NAND_D_PORTF
- bool "PORT F"
- help
- PORT F
-
-config BF527_NAND_D_PORTH
- bool "PORT H"
- help
- PORT H
-endchoice
-
-comment "Hysteresis/Schmitt Trigger Control"
-config BFIN_HYSTERESIS_CONTROL
- bool "Enable Hysteresis Control"
- help
- The ADSP-BF52x allows to control input hysteresis for Port F,
- Port G and Port H and other processor signal inputs.
- The Schmitt trigger enables can be set only for pin groups.
- Saying Y will overwrite the default reset or boot loader
- initialization.
-
-menu "PORT F"
- depends on BFIN_HYSTERESIS_CONTROL
-config GPIO_HYST_PORTF_0_7
- bool "Enable Hysteresis on PORTF {0...7}"
-config GPIO_HYST_PORTF_8_9
- bool "Enable Hysteresis on PORTF {8, 9}"
-config GPIO_HYST_PORTF_10
- bool "Enable Hysteresis on PORTF 10"
-config GPIO_HYST_PORTF_11
- bool "Enable Hysteresis on PORTF 11"
-config GPIO_HYST_PORTF_12_13
- bool "Enable Hysteresis on PORTF {12, 13}"
-config GPIO_HYST_PORTF_14_15
- bool "Enable Hysteresis on PORTF {14, 15}"
-endmenu
-
-menu "PORT G"
- depends on BFIN_HYSTERESIS_CONTROL
-config GPIO_HYST_PORTG_0
- bool "Enable Hysteresis on PORTG 0"
-config GPIO_HYST_PORTG_1_4
- bool "Enable Hysteresis on PORTG {1...4}"
-config GPIO_HYST_PORTG_5_6
- bool "Enable Hysteresis on PORTG {5, 6}"
-config GPIO_HYST_PORTG_7_8
- bool "Enable Hysteresis on PORTG {7, 8}"
-config GPIO_HYST_PORTG_9
- bool "Enable Hysteresis on PORTG 9"
-config GPIO_HYST_PORTG_10
- bool "Enable Hysteresis on PORTG 10"
-config GPIO_HYST_PORTG_11_13
- bool "Enable Hysteresis on PORTG {11...13}"
-config GPIO_HYST_PORTG_14_15
- bool "Enable Hysteresis on PORTG {14, 15}"
-endmenu
-
-menu "PORT H"
- depends on BFIN_HYSTERESIS_CONTROL
-config GPIO_HYST_PORTH_0_7
- bool "Enable Hysteresis on PORTH {0...7}"
-config GPIO_HYST_PORTH_8
- bool "Enable Hysteresis on PORTH 8"
-config GPIO_HYST_PORTH_9_15
- bool "Enable Hysteresis on PORTH {9...15}"
-endmenu
-
-menu "None-GPIO"
- depends on BFIN_HYSTERESIS_CONTROL
-config NONEGPIO_HYST_TMR0_FS1_PPICLK
- bool "Enable Hysteresis on {TMR0, PPI_FS1, PPI_CLK}"
-config NONEGPIO_HYST_NMI_RST_BMODE
- bool "Enable Hysteresis on {NMI, RESET, BMODE}"
-config NONEGPIO_HYST_JTAG
- bool "Enable Hysteresis on JTAG"
-endmenu
-
-comment "Interrupt Priority Assignment"
-menu "Priority"
-
-config IRQ_PLL_WAKEUP
- int "IRQ_PLL_WAKEUP"
- default 7
-config IRQ_DMA0_ERROR
- int "IRQ_DMA0_ERROR"
- default 7
-config IRQ_DMAR0_BLK
- int "IRQ_DMAR0_BLK"
- default 7
-config IRQ_DMAR1_BLK
- int "IRQ_DMAR1_BLK"
- default 7
-config IRQ_DMAR0_OVR
- int "IRQ_DMAR0_OVR"
- default 7
-config IRQ_DMAR1_OVR
- int "IRQ_DMAR1_OVR"
- default 7
-config IRQ_PPI_ERROR
- int "IRQ_PPI_ERROR"
- default 7
-config IRQ_MAC_ERROR
- int "IRQ_MAC_ERROR"
- default 7
-config IRQ_SPORT0_ERROR
- int "IRQ_SPORT0_ERROR"
- default 7
-config IRQ_SPORT1_ERROR
- int "IRQ_SPORT1_ERROR"
- default 7
-config IRQ_UART0_ERROR
- int "IRQ_UART0_ERROR"
- default 7
-config IRQ_UART1_ERROR
- int "IRQ_UART1_ERROR"
- default 7
-config IRQ_RTC
- int "IRQ_RTC"
- default 8
-config IRQ_PPI
- int "IRQ_PPI"
- default 8
-config IRQ_SPORT0_RX
- int "IRQ_SPORT0_RX"
- default 9
-config IRQ_SPORT0_TX
- int "IRQ_SPORT0_TX"
- default 9
-config IRQ_SPORT1_RX
- int "IRQ_SPORT1_RX"
- default 9
-config IRQ_SPORT1_TX
- int "IRQ_SPORT1_TX"
- default 9
-config IRQ_TWI
- int "IRQ_TWI"
- default 10
-config IRQ_SPI
- int "IRQ_SPI"
- default 10
-config IRQ_UART0_RX
- int "IRQ_UART0_RX"
- default 10
-config IRQ_UART0_TX
- int "IRQ_UART0_TX"
- default 10
-config IRQ_UART1_RX
- int "IRQ_UART1_RX"
- default 10
-config IRQ_UART1_TX
- int "IRQ_UART1_TX"
- default 10
-config IRQ_OPTSEC
- int "IRQ_OPTSEC"
- default 11
-config IRQ_CNT
- int "IRQ_CNT"
- default 11
-config IRQ_MAC_RX
- int "IRQ_MAC_RX"
- default 11
-config IRQ_PORTH_INTA
- int "IRQ_PORTH_INTA"
- default 11
-config IRQ_MAC_TX
- int "IRQ_MAC_TX/NFC"
- default 11
-config IRQ_PORTH_INTB
- int "IRQ_PORTH_INTB"
- default 11
-config IRQ_TIMER0
- int "IRQ_TIMER0"
- default 7 if TICKSOURCE_GPTMR0
- default 8
-config IRQ_TIMER1
- int "IRQ_TIMER1"
- default 12
-config IRQ_TIMER2
- int "IRQ_TIMER2"
- default 12
-config IRQ_TIMER3
- int "IRQ_TIMER3"
- default 12
-config IRQ_TIMER4
- int "IRQ_TIMER4"
- default 12
-config IRQ_TIMER5
- int "IRQ_TIMER5"
- default 12
-config IRQ_TIMER6
- int "IRQ_TIMER6"
- default 12
-config IRQ_TIMER7
- int "IRQ_TIMER7"
- default 12
-config IRQ_PORTG_INTA
- int "IRQ_PORTG_INTA"
- default 12
-config IRQ_PORTG_INTB
- int "IRQ_PORTG_INTB"
- default 12
-config IRQ_MEM_DMA0
- int "IRQ_MEM_DMA0"
- default 13
-config IRQ_MEM_DMA1
- int "IRQ_MEM_DMA1"
- default 13
-config IRQ_WATCH
- int "IRQ_WATCH"
- default 13
-config IRQ_PORTF_INTA
- int "IRQ_PORTF_INTA"
- default 13
-config IRQ_PORTF_INTB
- int "IRQ_PORTF_INTB"
- default 13
-config IRQ_SPI_ERROR
- int "IRQ_SPI_ERROR"
- default 7
-config IRQ_NFC_ERROR
- int "IRQ_NFC_ERROR"
- default 7
-config IRQ_HDMA_ERROR
- int "IRQ_HDMA_ERROR"
- default 7
-config IRQ_HDMA
- int "IRQ_HDMA"
- default 7
-config IRQ_USB_EINT
- int "IRQ_USB_EINT"
- default 10
-config IRQ_USB_INT0
- int "IRQ_USB_INT0"
- default 10
-config IRQ_USB_INT1
- int "IRQ_USB_INT1"
- default 10
-config IRQ_USB_INT2
- int "IRQ_USB_INT2"
- default 10
-config IRQ_USB_DMA
- int "IRQ_USB_DMA"
- default 10
-
- help
- Enter the priority numbers between 7-13 ONLY. Others are Reserved.
- This applies to all the above. It is not recommended to assign the
- highest priority number 7 to UART or any other device.
-
-endmenu
-
-endmenu
-
-endif