summaryrefslogtreecommitdiff
path: root/arch/blackfin/mach-bf533/boards/ezkit.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/mach-bf533/boards/ezkit.c')
-rw-r--r--arch/blackfin/mach-bf533/boards/ezkit.c551
1 files changed, 0 insertions, 551 deletions
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
deleted file mode 100644
index d64d270e9e62..000000000000
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ /dev/null
@@ -1,551 +0,0 @@
-/*
- * Copyright 2004-2009 Analog Devices Inc.
- * 2005 National ICT Australia (NICTA)
- * Aidan Williams <aidan@nicta.com.au>
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
-#include <linux/usb/isp1362.h>
-#endif
-#include <linux/irq.h>
-#include <linux/i2c.h>
-#include <linux/gpio/machine.h>
-#include <asm/dma.h>
-#include <asm/bfin5xx_spi.h>
-#include <asm/portmux.h>
-#include <asm/dpmc.h>
-
-/*
- * Name the Board for the /proc/cpuinfo
- */
-const char bfin_board_name[] = "ADI BF533-EZKIT";
-
-#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
-static struct platform_device rtc_device = {
- .name = "rtc-bfin",
- .id = -1,
-};
-#endif
-
-/*
- * USB-LAN EzExtender board
- * Driver needs to know address, irq and flag pin.
- */
-#if IS_ENABLED(CONFIG_SMC91X)
-#include <linux/smc91x.h>
-
-static struct smc91x_platdata smc91x_info = {
- .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
- .leda = RPC_LED_100_10,
- .ledb = RPC_LED_TX_RX,
-};
-
-static struct resource smc91x_resources[] = {
- {
- .name = "smc91x-regs",
- .start = 0x20310300,
- .end = 0x20310300 + 16,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_PF9,
- .end = IRQ_PF9,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = 0,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
- .dev = {
- .platform_data = &smc91x_info,
- },
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
-static struct mtd_partition ezkit_partitions_a[] = {
- {
- .name = "bootloader(nor a)",
- .size = 0x40000,
- .offset = 0,
- }, {
- .name = "linux kernel(nor a)",
- .size = MTDPART_SIZ_FULL,
- .offset = MTDPART_OFS_APPEND,
- },
-};
-
-static struct physmap_flash_data ezkit_flash_data_a = {
- .width = 2,
- .parts = ezkit_partitions_a,
- .nr_parts = ARRAY_SIZE(ezkit_partitions_a),
-};
-
-static struct resource ezkit_flash_resource_a = {
- .start = 0x20000000,
- .end = 0x200fffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device ezkit_flash_device_a = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &ezkit_flash_data_a,
- },
- .num_resources = 1,
- .resource = &ezkit_flash_resource_a,
-};
-
-static struct mtd_partition ezkit_partitions_b[] = {
- {
- .name = "file system(nor b)",
- .size = MTDPART_SIZ_FULL,
- .offset = MTDPART_OFS_APPEND,
- },
-};
-
-static struct physmap_flash_data ezkit_flash_data_b = {
- .width = 2,
- .parts = ezkit_partitions_b,
- .nr_parts = ARRAY_SIZE(ezkit_partitions_b),
-};
-
-static struct resource ezkit_flash_resource_b = {
- .start = 0x20100000,
- .end = 0x201fffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device ezkit_flash_device_b = {
- .name = "physmap-flash",
- .id = 4,
- .dev = {
- .platform_data = &ezkit_flash_data_b,
- },
- .num_resources = 1,
- .resource = &ezkit_flash_resource_b,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_PLATRAM)
-static struct platdata_mtd_ram sram_data_a = {
- .mapname = "Flash A SRAM",
- .bankwidth = 2,
-};
-
-static struct resource sram_resource_a = {
- .start = 0x20240000,
- .end = 0x2024ffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device sram_device_a = {
- .name = "mtd-ram",
- .id = 8,
- .dev = {
- .platform_data = &sram_data_a,
- },
- .num_resources = 1,
- .resource = &sram_resource_a,
-};
-
-static struct platdata_mtd_ram sram_data_b = {
- .mapname = "Flash B SRAM",
- .bankwidth = 2,
-};
-
-static struct resource sram_resource_b = {
- .start = 0x202c0000,
- .end = 0x202cffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device sram_device_b = {
- .name = "mtd-ram",
- .id = 9,
- .dev = {
- .platform_data = &sram_data_b,
- },
- .num_resources = 1,
- .resource = &sram_resource_b,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_M25P80)
-static struct mtd_partition bfin_spi_flash_partitions[] = {
- {
- .name = "bootloader(spi)",
- .size = 0x00020000,
- .offset = 0,
- .mask_flags = MTD_CAP_ROM
- }, {
- .name = "linux kernel(spi)",
- .size = 0xe0000,
- .offset = MTDPART_OFS_APPEND,
- }, {
- .name = "file system(spi)",
- .size = MTDPART_SIZ_FULL,
- .offset = MTDPART_OFS_APPEND,
- }
-};
-
-static struct flash_platform_data bfin_spi_flash_data = {
- .name = "m25p80",
- .parts = bfin_spi_flash_partitions,
- .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
- .type = "m25p64",
-};
-
-/* SPI flash chip (m25p64) */
-static struct bfin5xx_spi_chip spi_flash_chip_info = {
- .enable_dma = 0, /* use dma transfer with this chip*/
-};
-#endif
-
-static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if IS_ENABLED(CONFIG_MTD_M25P80)
- {
- /* the modalias must be the same as spi device driver name */
- .modalias = "m25p80", /* Name of spi_driver for this device */
- .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0, /* Framework bus number */
- .chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/
- .platform_data = &bfin_spi_flash_data,
- .controller_data = &spi_flash_chip_info,
- .mode = SPI_MODE_3,
- },
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
- {
- .modalias = "ad183x",
- .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = 4,
- },
-#endif
-#if IS_ENABLED(CONFIG_SPI_SPIDEV)
- {
- .modalias = "spidev",
- .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 0,
- .chip_select = 1,
- },
-#endif
-};
-
-#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
-/* SPI (0) */
-static struct resource bfin_spi0_resource[] = {
- [0] = {
- .start = SPI0_REGBASE,
- .end = SPI0_REGBASE + 0xFF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = CH_SPI,
- .end = CH_SPI,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = IRQ_SPI,
- .end = IRQ_SPI,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-/* SPI controller data */
-static struct bfin5xx_spi_master bfin_spi0_info = {
- .num_chipselect = 8,
- .enable_dma = 1, /* master has the ability to do dma transfer */
- .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
-};
-
-static struct platform_device bfin_spi0_device = {
- .name = "bfin-spi",
- .id = 0, /* Bus number */
- .num_resources = ARRAY_SIZE(bfin_spi0_resource),
- .resource = bfin_spi0_resource,
- .dev = {
- .platform_data = &bfin_spi0_info, /* Passed to driver */
- },
-};
-#endif /* spi master and devices */
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN)
-#ifdef CONFIG_SERIAL_BFIN_UART0
-static struct resource bfin_uart0_resources[] = {
- {
- .start = BFIN_UART_THR,
- .end = BFIN_UART_GCTL+2,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_UART0_TX,
- .end = IRQ_UART0_TX,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = IRQ_UART0_ERROR,
- .end = IRQ_UART0_ERROR,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = CH_UART0_TX,
- .end = CH_UART0_TX,
- .flags = IORESOURCE_DMA,
- },
- {
- .start = CH_UART0_RX,
- .end = CH_UART0_RX,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static unsigned short bfin_uart0_peripherals[] = {
- P_UART0_TX, P_UART0_RX, 0
-};
-
-static struct platform_device bfin_uart0_device = {
- .name = "bfin-uart",
- .id = 0,
- .num_resources = ARRAY_SIZE(bfin_uart0_resources),
- .resource = bfin_uart0_resources,
- .dev = {
- .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
- },
-};
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_SIR)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
- {
- .start = 0xFFC00400,
- .end = 0xFFC004FF,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_UART0_RX,
- .end = IRQ_UART0_RX+1,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = CH_UART0_RX,
- .end = CH_UART0_RX+1,
- .flags = IORESOURCE_DMA,
- },
-};
-
-static struct platform_device bfin_sir0_device = {
- .name = "bfin_sir",
- .id = 0,
- .num_resources = ARRAY_SIZE(bfin_sir0_resources),
- .resource = bfin_sir0_resources,
-};
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
-static struct gpio_keys_button bfin_gpio_keys_table[] = {
- {BTN_0, GPIO_PF7, 1, "gpio-keys: BTN0"},
- {BTN_1, GPIO_PF8, 1, "gpio-keys: BTN1"},
- {BTN_2, GPIO_PF9, 1, "gpio-keys: BTN2"},
- {BTN_3, GPIO_PF10, 1, "gpio-keys: BTN3"},
-};
-
-static struct gpio_keys_platform_data bfin_gpio_keys_data = {
- .buttons = bfin_gpio_keys_table,
- .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table),
-};
-
-static struct platform_device bfin_device_gpiokeys = {
- .name = "gpio-keys",
- .dev = {
- .platform_data = &bfin_gpio_keys_data,
- },
-};
-#endif
-
-#if IS_ENABLED(CONFIG_I2C_GPIO)
-#include <linux/i2c-gpio.h>
-
-static struct gpiod_lookup_table bfin_i2c_gpiod_table = {
- .dev_id = "i2c-gpio",
- .table = {
- GPIO_LOOKUP_IDX("BFIN-GPIO", GPIO_PF1, NULL, 0,
- GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
- GPIO_LOOKUP_IDX("BFIN-GPIO", GPIO_PF0, NULL, 1,
- GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
- },
-};
-
-static struct i2c_gpio_platform_data i2c_gpio_data = {
- .udelay = 40,
-};
-
-static struct platform_device i2c_gpio_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev = {
- .platform_data = &i2c_gpio_data,
- },
-};
-#endif
-
-static const unsigned int cclk_vlev_datasheet[] =
-{
- VRPAIR(VLEV_085, 250000000),
- VRPAIR(VLEV_090, 376000000),
- VRPAIR(VLEV_095, 426000000),
- VRPAIR(VLEV_100, 426000000),
- VRPAIR(VLEV_105, 476000000),
- VRPAIR(VLEV_110, 476000000),
- VRPAIR(VLEV_115, 476000000),
- VRPAIR(VLEV_120, 600000000),
- VRPAIR(VLEV_125, 600000000),
- VRPAIR(VLEV_130, 600000000),
-};
-
-static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
- .tuple_tab = cclk_vlev_datasheet,
- .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
- .vr_settling_time = 25 /* us */,
-};
-
-static struct platform_device bfin_dpmc = {
- .name = "bfin dpmc",
- .dev = {
- .platform_data = &bfin_dmpc_vreg_data,
- },
-};
-
-static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if IS_ENABLED(CONFIG_FB_BFIN_7393)
- {
- I2C_BOARD_INFO("bfin-adv7393", 0x2B),
- },
-#endif
-};
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
-static struct platform_device bfin_i2s = {
- .name = "bfin-i2s",
- .id = CONFIG_SND_BF5XX_SPORT_NUM,
- /* TODO: add platform data here */
-};
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
-static struct platform_device bfin_ac97 = {
- .name = "bfin-ac97",
- .id = CONFIG_SND_BF5XX_SPORT_NUM,
- /* TODO: add platform data here */
-};
-#endif
-
-static struct platform_device *ezkit_devices[] __initdata = {
-
- &bfin_dpmc,
-
-#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
- &ezkit_flash_device_a,
- &ezkit_flash_device_b,
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_PLATRAM)
- &sram_device_a,
- &sram_device_b,
-#endif
-
-#if IS_ENABLED(CONFIG_SMC91X)
- &smc91x_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
- &bfin_spi0_device,
-#endif
-
-#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
- &rtc_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN)
-#ifdef CONFIG_SERIAL_BFIN_UART0
- &bfin_uart0_device,
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_SIR)
-#ifdef CONFIG_BFIN_SIR0
- &bfin_sir0_device,
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
- &bfin_device_gpiokeys,
-#endif
-
-#if IS_ENABLED(CONFIG_I2C_GPIO)
- &i2c_gpio_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
- &bfin_i2s,
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
- &bfin_ac97,
-#endif
-};
-
-static int __init ezkit_init(void)
-{
- printk(KERN_INFO "%s(): registering device resources\n", __func__);
-#if IS_ENABLED(CONFIG_I2C_GPIO)
- gpiod_add_lookup_table(&bfin_i2c_gpiod_table);
-#endif
- platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
- spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
- i2c_register_board_info(0, bfin_i2c_board_info,
- ARRAY_SIZE(bfin_i2c_board_info));
- return 0;
-}
-
-arch_initcall(ezkit_init);
-
-static struct platform_device *ezkit_early_devices[] __initdata = {
-#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
-#ifdef CONFIG_SERIAL_BFIN_UART0
- &bfin_uart0_device,
-#endif
-#endif
-};
-
-void __init native_machine_early_platform_add_devices(void)
-{
- printk(KERN_INFO "register early platform devices\n");
- early_platform_add_devices(ezkit_early_devices,
- ARRAY_SIZE(ezkit_early_devices));
-}