diff options
Diffstat (limited to 'arch/ia64/Kconfig')
| -rw-r--r-- | arch/ia64/Kconfig | 462 |
1 files changed, 0 insertions, 462 deletions
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig deleted file mode 100644 index bab7cd878464..000000000000 --- a/arch/ia64/Kconfig +++ /dev/null @@ -1,462 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -config PGTABLE_LEVELS - int "Page Table Levels" if !IA64_PAGE_SIZE_64KB - range 3 4 if !IA64_PAGE_SIZE_64KB - default 3 - -menu "Processor type and features" - -config IA64 - bool - select ARCH_MIGHT_HAVE_PC_PARPORT - select ARCH_MIGHT_HAVE_PC_SERIO - select ACPI - select ACPI_NUMA if NUMA - select ARCH_SUPPORTS_ACPI - select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI - select ARCH_MIGHT_HAVE_ACPI_PDC if ACPI - select FORCE_PCI - select PCI_DOMAINS if PCI - select PCI_MSI - select PCI_SYSCALL if PCI - select HAVE_ASM_MODVERSIONS - select HAVE_UNSTABLE_SCHED_CLOCK - select HAVE_EXIT_THREAD - select HAVE_IDE - select HAVE_OPROFILE - select HAVE_KPROBES - select HAVE_KRETPROBES - select HAVE_FTRACE_MCOUNT_RECORD - select HAVE_DYNAMIC_FTRACE if (!ITANIUM) - select HAVE_FUNCTION_TRACER - select TTY - select HAVE_ARCH_TRACEHOOK - select HAVE_MEMBLOCK_NODE_MAP - select HAVE_VIRT_CPU_ACCOUNTING - select DMA_NONCOHERENT_MMAP - select ARCH_HAS_SYNC_DMA_FOR_CPU - select VIRT_TO_BUS - select GENERIC_IRQ_PROBE - select GENERIC_PENDING_IRQ if SMP - select GENERIC_IRQ_SHOW - select GENERIC_IRQ_LEGACY - select ARCH_HAVE_NMI_SAFE_CMPXCHG - select GENERIC_IOMAP - select GENERIC_SMP_IDLE_THREAD - select ARCH_TASK_STRUCT_ON_STACK - select ARCH_TASK_STRUCT_ALLOCATOR - select ARCH_THREAD_STACK_ALLOCATOR - select ARCH_CLOCKSOURCE_DATA - select GENERIC_TIME_VSYSCALL - select SWIOTLB - select SYSCTL_ARCH_UNALIGN_NO_WARN - select HAVE_MOD_ARCH_SPECIFIC - select MODULES_USE_ELF_RELA - select ARCH_USE_CMPXCHG_LOCKREF - select HAVE_ARCH_AUDITSYSCALL - select NEED_DMA_MAP_STATE - select NEED_SG_DMA_LENGTH - select NUMA if !FLATMEM - default y - help - The Itanium Processor Family is Intel's 64-bit successor to - the 32-bit X86 line. The IA-64 Linux project has a home - page at <http://www.linuxia64.org/> and a mailing list at - <linux-ia64@vger.kernel.org>. - -config 64BIT - bool - select ATA_NONSTANDARD if ATA - default y - -config ZONE_DMA32 - def_bool y - -config MMU - bool - default y - -config STACKTRACE_SUPPORT - def_bool y - -config GENERIC_LOCKBREAK - def_bool n - -config HUGETLB_PAGE_SIZE_VARIABLE - bool - depends on HUGETLB_PAGE - default y - -config GENERIC_CALIBRATE_DELAY - bool - default y - -config HAVE_SETUP_PER_CPU_AREA - def_bool y - -config DMI - bool - default y - select DMI_SCAN_MACHINE_NON_EFI_FALLBACK - -config EFI - bool - select UCS2_STRING - default y - -config SCHED_OMIT_FRAME_POINTER - bool - default y - -config IA64_UNCACHED_ALLOCATOR - bool - select GENERIC_ALLOCATOR - -config ARCH_USES_PG_UNCACHED - def_bool y - depends on IA64_UNCACHED_ALLOCATOR - -config AUDIT_ARCH - bool - default y - -choice - prompt "Processor type" - default ITANIUM - -config ITANIUM - bool "Itanium" - help - Select your IA-64 processor type. The default is Itanium. - This choice is safe for all IA-64 systems, but may not perform - optimally on systems with, say, Itanium 2 or newer processors. - -config MCKINLEY - bool "Itanium 2" - help - Select this to configure for an Itanium 2 (McKinley) processor. - -endchoice - -choice - prompt "Kernel page size" - default IA64_PAGE_SIZE_16KB - -config IA64_PAGE_SIZE_4KB - bool "4KB" - help - This lets you select the page size of the kernel. For best IA-64 - performance, a page size of 8KB or 16KB is recommended. For best - IA-32 compatibility, a page size of 4KB should be selected (the vast - majority of IA-32 binaries work perfectly fine with a larger page - size). For Itanium 2 or newer systems, a page size of 64KB can also - be selected. - - 4KB For best IA-32 compatibility - 8KB For best IA-64 performance - 16KB For best IA-64 performance - 64KB Requires Itanium 2 or newer processor. - - If you don't know what to do, choose 16KB. - -config IA64_PAGE_SIZE_8KB - bool "8KB" - -config IA64_PAGE_SIZE_16KB - bool "16KB" - -config IA64_PAGE_SIZE_64KB - depends on !ITANIUM - bool "64KB" - -endchoice - -source "kernel/Kconfig.hz" - -config IA64_BRL_EMU - bool - depends on ITANIUM - default y - -# align cache-sensitive data to 128 bytes -config IA64_L1_CACHE_SHIFT - int - default "7" if MCKINLEY - default "6" if ITANIUM - -config IA64_SGI_UV - bool "SGI-UV support" - help - Selecting this option will add specific support for running on SGI - UV based systems. If you have an SGI UV system or are building a - distro kernel, select this option. - -config IA64_HP_SBA_IOMMU - bool "HP SBA IOMMU support" - default y - help - Say Y here to add support for the SBA IOMMU found on HP zx1 and - sx1000 systems. If you're unsure, answer Y. - -config IA64_CYCLONE - bool "Cyclone (EXA) Time Source support" - help - Say Y here to enable support for IBM EXA Cyclone time source. - If you're unsure, answer N. - -config FORCE_MAX_ZONEORDER - int "MAX_ORDER (11 - 17)" if !HUGETLB_PAGE - range 11 17 if !HUGETLB_PAGE - default "17" if HUGETLB_PAGE - default "11" - -config SMP - bool "Symmetric multi-processing support" - help - This enables support for systems with more than one CPU. If you have - a system with only one CPU, say N. If you have a system with more - than one CPU, say Y. - - If you say N here, the kernel will run on single and multiprocessor - systems, but will use only one CPU of a multiprocessor system. If - you say Y here, the kernel will run on many, but not all, - single processor systems. On a single processor system, the kernel - will run faster if you say N here. - - See also the SMP-HOWTO available at - <http://www.tldp.org/docs.html#howto>. - - If you don't know what to do here, say N. - -config NR_CPUS - int "Maximum number of CPUs (2-4096)" - range 2 4096 - depends on SMP - default "4096" - help - You should set this to the number of CPUs in your system, but - keep in mind that a kernel compiled for, e.g., 2 CPUs will boot but - only use 2 CPUs on a >2 CPU system. Setting this to a value larger - than 64 will cause the use of a CPU mask array, causing a small - performance hit. - -config HOTPLUG_CPU - bool "Support for hot-pluggable CPUs" - depends on SMP - default n - ---help--- - Say Y here to experiment with turning CPUs off and on. CPUs - can be controlled through /sys/devices/system/cpu/cpu#. - Say N if you want to disable CPU hotplug. - -config ARCH_ENABLE_MEMORY_HOTPLUG - def_bool y - -config ARCH_ENABLE_MEMORY_HOTREMOVE - def_bool y - -config SCHED_SMT - bool "SMT scheduler support" - depends on SMP - help - Improves the CPU scheduler's decision making when dealing with - Intel IA64 chips with MultiThreading at a cost of slightly increased - overhead in some places. If unsure say N here. - -config PERMIT_BSP_REMOVE - bool "Support removal of Bootstrap Processor" - depends on HOTPLUG_CPU - default n - ---help--- - Say Y here if your platform SAL will support removal of BSP with HOTPLUG_CPU - support. - -config FORCE_CPEI_RETARGET - bool "Force assumption that CPEI can be re-targeted" - depends on PERMIT_BSP_REMOVE - default n - ---help--- - Say Y if you need to force the assumption that CPEI can be re-targeted to - any cpu in the system. This hint is available via ACPI 3.0 specifications. - Tiger4 systems are capable of re-directing CPEI to any CPU other than BSP. - This option it useful to enable this feature on older BIOS's as well. - You can also enable this by using boot command line option force_cpei=1. - -config ARCH_SELECT_MEMORY_MODEL - def_bool y - -config ARCH_DISCONTIGMEM_ENABLE - def_bool y - help - Say Y to support efficient handling of discontiguous physical memory, - for architectures which are either NUMA (Non-Uniform Memory Access) - or have huge holes in the physical address space for other reasons. - See <file:Documentation/vm/numa.rst> for more. - -config ARCH_FLATMEM_ENABLE - def_bool y - -config ARCH_SPARSEMEM_ENABLE - def_bool y - depends on ARCH_DISCONTIGMEM_ENABLE - select SPARSEMEM_VMEMMAP_ENABLE - -config ARCH_DISCONTIGMEM_DEFAULT - def_bool y - depends on ARCH_DISCONTIGMEM_ENABLE - -config NUMA - bool "NUMA support" - depends on !FLATMEM - select SMP - help - Say Y to compile the kernel to support NUMA (Non-Uniform Memory - Access). This option is for configuring high-end multiprocessor - server systems. If in doubt, say N. - -config NODES_SHIFT - int "Max num nodes shift(3-10)" - range 3 10 - default "10" - depends on NEED_MULTIPLE_NODES - help - This option specifies the maximum number of nodes in your SSI system. - MAX_NUMNODES will be 2^(This value). - If in doubt, use the default. - -# VIRTUAL_MEM_MAP and FLAT_NODE_MEM_MAP are functionally equivalent. -# VIRTUAL_MEM_MAP has been retained for historical reasons. -config VIRTUAL_MEM_MAP - bool "Virtual mem map" - depends on !SPARSEMEM - default y - help - Say Y to compile the kernel with support for a virtual mem map. - This code also only takes effect if a memory hole of greater than - 1 Gb is found during boot. You must turn this option on if you - require the DISCONTIGMEM option for your machine. If you are - unsure, say Y. - -config HOLES_IN_ZONE - bool - default y if VIRTUAL_MEM_MAP - -config HAVE_ARCH_EARLY_PFN_TO_NID - def_bool NUMA && SPARSEMEM - -config HAVE_ARCH_NODEDATA_EXTENSION - def_bool y - depends on NUMA - -config USE_PERCPU_NUMA_NODE_ID - def_bool y - depends on NUMA - -config HAVE_MEMORYLESS_NODES - def_bool NUMA - -config ARCH_PROC_KCORE_TEXT - def_bool y - depends on PROC_KCORE - -config IA64_MCA_RECOVERY - tristate "MCA recovery from errors other than TLB." - -config PERFMON - bool "Performance monitor support" - depends on BROKEN - help - Selects whether support for the IA-64 performance monitor hardware - is included in the kernel. This makes some kernel data-structures a - little bigger and slows down execution a bit, but it is generally - a good idea to turn this on. If you're unsure, say Y. - -config IA64_PALINFO - tristate "/proc/pal support" - help - If you say Y here, you are able to get PAL (Processor Abstraction - Layer) information in /proc/pal. This contains useful information - about the processors in your systems, such as cache and TLB sizes - and the PAL firmware version in use. - - To use this option, you have to ensure that the "/proc file system - support" (CONFIG_PROC_FS) is enabled, too. - -config IA64_MC_ERR_INJECT - tristate "MC error injection support" - help - Adds support for MC error injection. If enabled, the kernel - will provide a sysfs interface for user applications to - call MC error injection PAL procedures to inject various errors. - This is a useful tool for MCA testing. - - If you're unsure, do not select this option. - -config IA64_ESI - bool "ESI (Extensible SAL Interface) support" - help - If you say Y here, support is built into the kernel to - make ESI calls. ESI calls are used to support vendor-specific - firmware extensions, such as the ability to inject memory-errors - for test-purposes. If you're unsure, say N. - -config IA64_HP_AML_NFW - bool "Support ACPI AML calls to native firmware" - help - This driver installs a global ACPI Operation Region handler for - region 0xA1. AML methods can use this OpRegion to call arbitrary - native firmware functions. The driver installs the OpRegion - handler if there is an HPQ5001 device or if the user supplies - the "force" module parameter, e.g., with the "aml_nfw.force" - kernel command line option. - -config KEXEC - bool "kexec system call" - depends on !SMP || HOTPLUG_CPU - select KEXEC_CORE - help - kexec is a system call that implements the ability to shutdown your - current kernel, and to start another kernel. It is like a reboot - but it is independent of the system firmware. And like a reboot - you can start any kernel with it, not just Linux. - - The name comes from the similarity to the exec system call. - - It is an ongoing process to be certain the hardware in a machine - is properly shutdown, so do not be surprised if this code does not - initially work for you. As of this writing the exact hardware - interface is strongly in flux, so no good recommendation can be - made. - -config CRASH_DUMP - bool "kernel crash dumps" - depends on IA64_MCA_RECOVERY && (!SMP || HOTPLUG_CPU) - help - Generate crash dump after being started by kexec. - -source "drivers/firmware/Kconfig" - -endmenu - -menu "Power management and ACPI options" - -source "kernel/power/Kconfig" - -source "drivers/acpi/Kconfig" - -if PM -menu "CPU Frequency scaling" -source "drivers/cpufreq/Kconfig" -endmenu -endif - -endmenu - -config MSPEC - tristate "Memory special operations driver" - depends on IA64 - select IA64_UNCACHED_ALLOCATOR - help - If you have an ia64 and you want to enable memory special - operations support (formerly known as fetchop), say Y here, - otherwise say N. |