summaryrefslogtreecommitdiff
path: root/arch/ia64/include/asm/system.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ia64/include/asm/system.h')
-rw-r--r--arch/ia64/include/asm/system.h207
1 files changed, 4 insertions, 203 deletions
diff --git a/arch/ia64/include/asm/system.h b/arch/ia64/include/asm/system.h
index 6cca30705d50..5b190b48fcd0 100644
--- a/arch/ia64/include/asm/system.h
+++ b/arch/ia64/include/asm/system.h
@@ -1,203 +1,4 @@
-#ifndef _ASM_IA64_SYSTEM_H
-#define _ASM_IA64_SYSTEM_H
-
-/*
- * System defines. Note that this is included both from .c and .S
- * files, so it does only defines, not any C code. This is based
- * on information published in the Processor Abstraction Layer
- * and the System Abstraction Layer manual.
- *
- * Copyright (C) 1998-2003 Hewlett-Packard Co
- * David Mosberger-Tang <davidm@hpl.hp.com>
- * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
- * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
- */
-
-#include <asm/kregs.h>
-#include <asm/page.h>
-#include <asm/pal.h>
-#include <asm/percpu.h>
-
-#define GATE_ADDR RGN_BASE(RGN_GATE)
-
-/*
- * 0xa000000000000000+2*PERCPU_PAGE_SIZE
- * - 0xa000000000000000+3*PERCPU_PAGE_SIZE remain unmapped (guard page)
- */
-#define KERNEL_START (GATE_ADDR+__IA64_UL_CONST(0x100000000))
-#define PERCPU_ADDR (-PERCPU_PAGE_SIZE)
-#define LOAD_OFFSET (KERNEL_START - KERNEL_TR_PAGE_SIZE)
-
-#ifndef __ASSEMBLY__
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-#define AT_VECTOR_SIZE_ARCH 2 /* entries in ARCH_DLINFO */
-
-struct pci_vector_struct {
- __u16 segment; /* PCI Segment number */
- __u16 bus; /* PCI Bus number */
- __u32 pci_id; /* ACPI split 16 bits device, 16 bits function (see section 6.1.1) */
- __u8 pin; /* PCI PIN (0 = A, 1 = B, 2 = C, 3 = D) */
- __u32 irq; /* IRQ assigned */
-};
-
-extern struct ia64_boot_param {
- __u64 command_line; /* physical address of command line arguments */
- __u64 efi_systab; /* physical address of EFI system table */
- __u64 efi_memmap; /* physical address of EFI memory map */
- __u64 efi_memmap_size; /* size of EFI memory map */
- __u64 efi_memdesc_size; /* size of an EFI memory map descriptor */
- __u32 efi_memdesc_version; /* memory descriptor version */
- struct {
- __u16 num_cols; /* number of columns on console output device */
- __u16 num_rows; /* number of rows on console output device */
- __u16 orig_x; /* cursor's x position */
- __u16 orig_y; /* cursor's y position */
- } console_info;
- __u64 fpswa; /* physical address of the fpswa interface */
- __u64 initrd_start;
- __u64 initrd_size;
-} *ia64_boot_param;
-
-/*
- * Macros to force memory ordering. In these descriptions, "previous"
- * and "subsequent" refer to program order; "visible" means that all
- * architecturally visible effects of a memory access have occurred
- * (at a minimum, this means the memory has been read or written).
- *
- * wmb(): Guarantees that all preceding stores to memory-
- * like regions are visible before any subsequent
- * stores and that all following stores will be
- * visible only after all previous stores.
- * rmb(): Like wmb(), but for reads.
- * mb(): wmb()/rmb() combo, i.e., all previous memory
- * accesses are visible before all subsequent
- * accesses and vice versa. This is also known as
- * a "fence."
- *
- * Note: "mb()" and its variants cannot be used as a fence to order
- * accesses to memory mapped I/O registers. For that, mf.a needs to
- * be used. However, we don't want to always use mf.a because (a)
- * it's (presumably) much slower than mf and (b) mf.a is supported for
- * sequential memory pages only.
- */
-#define mb() ia64_mf()
-#define rmb() mb()
-#define wmb() mb()
-#define read_barrier_depends() do { } while(0)
-
-#ifdef CONFIG_SMP
-# define smp_mb() mb()
-# define smp_rmb() rmb()
-# define smp_wmb() wmb()
-# define smp_read_barrier_depends() read_barrier_depends()
-#else
-# define smp_mb() barrier()
-# define smp_rmb() barrier()
-# define smp_wmb() barrier()
-# define smp_read_barrier_depends() do { } while(0)
-#endif
-
-/*
- * XXX check on this ---I suspect what Linus really wants here is
- * acquire vs release semantics but we can't discuss this stuff with
- * Linus just yet. Grrr...
- */
-#define set_mb(var, value) do { (var) = (value); mb(); } while (0)
-
-/*
- * The group barrier in front of the rsm & ssm are necessary to ensure
- * that none of the previous instructions in the same group are
- * affected by the rsm/ssm.
- */
-
-#ifdef __KERNEL__
-
-/*
- * Context switch from one thread to another. If the two threads have
- * different address spaces, schedule() has already taken care of
- * switching to the new address space by calling switch_mm().
- *
- * Disabling access to the fph partition and the debug-register
- * context switch MUST be done before calling ia64_switch_to() since a
- * newly created thread returns directly to
- * ia64_ret_from_syscall_clear_r8.
- */
-extern struct task_struct *ia64_switch_to (void *next_task);
-
-struct task_struct;
-
-extern void ia64_save_extra (struct task_struct *task);
-extern void ia64_load_extra (struct task_struct *task);
-
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
-extern void ia64_account_on_switch (struct task_struct *prev, struct task_struct *next);
-# define IA64_ACCOUNT_ON_SWITCH(p,n) ia64_account_on_switch(p,n)
-#else
-# define IA64_ACCOUNT_ON_SWITCH(p,n)
-#endif
-
-#ifdef CONFIG_PERFMON
- DECLARE_PER_CPU(unsigned long, pfm_syst_info);
-# define PERFMON_IS_SYSWIDE() (__get_cpu_var(pfm_syst_info) & 0x1)
-#else
-# define PERFMON_IS_SYSWIDE() (0)
-#endif
-
-#define IA64_HAS_EXTRA_STATE(t) \
- ((t)->thread.flags & (IA64_THREAD_DBG_VALID|IA64_THREAD_PM_VALID) \
- || PERFMON_IS_SYSWIDE())
-
-#define __switch_to(prev,next,last) do { \
- IA64_ACCOUNT_ON_SWITCH(prev, next); \
- if (IA64_HAS_EXTRA_STATE(prev)) \
- ia64_save_extra(prev); \
- if (IA64_HAS_EXTRA_STATE(next)) \
- ia64_load_extra(next); \
- ia64_psr(task_pt_regs(next))->dfh = !ia64_is_local_fpu_owner(next); \
- (last) = ia64_switch_to((next)); \
-} while (0)
-
-#ifdef CONFIG_SMP
-/*
- * In the SMP case, we save the fph state when context-switching away from a thread that
- * modified fph. This way, when the thread gets scheduled on another CPU, the CPU can
- * pick up the state from task->thread.fph, avoiding the complication of having to fetch
- * the latest fph state from another CPU. In other words: eager save, lazy restore.
- */
-# define switch_to(prev,next,last) do { \
- if (ia64_psr(task_pt_regs(prev))->mfh && ia64_is_local_fpu_owner(prev)) { \
- ia64_psr(task_pt_regs(prev))->mfh = 0; \
- (prev)->thread.flags |= IA64_THREAD_FPH_VALID; \
- __ia64_save_fpu((prev)->thread.fph); \
- } \
- __switch_to(prev, next, last); \
- /* "next" in old context is "current" in new context */ \
- if (unlikely((current->thread.flags & IA64_THREAD_MIGRATION) && \
- (task_cpu(current) != \
- task_thread_info(current)->last_cpu))) { \
- platform_migrate(current); \
- task_thread_info(current)->last_cpu = task_cpu(current); \
- } \
-} while (0)
-#else
-# define switch_to(prev,next,last) __switch_to(prev, next, last)
-#endif
-
-#define __ARCH_WANT_UNLOCKED_CTXSW
-#define ARCH_HAS_PREFETCH_SWITCH_STACK
-#define ia64_platform_is(x) (strcmp(x, platform_name) == 0)
-
-void cpu_idle_wait(void);
-
-#define arch_align_stack(x) (x)
-
-void default_idle(void);
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_IA64_SYSTEM_H */
+/* FILE TO BE DELETED. DO NOT ADD STUFF HERE! */
+#include <asm/barrier.h>
+#include <asm/exec.h>
+#include <asm/switch_to.h>