diff options
Diffstat (limited to 'arch/ia64/kernel/sal.c')
| -rw-r--r-- | arch/ia64/kernel/sal.c | 399 |
1 files changed, 0 insertions, 399 deletions
diff --git a/arch/ia64/kernel/sal.c b/arch/ia64/kernel/sal.c deleted file mode 100644 index c455ece977ad..000000000000 --- a/arch/ia64/kernel/sal.c +++ /dev/null @@ -1,399 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * System Abstraction Layer (SAL) interface routines. - * - * Copyright (C) 1998, 1999, 2001, 2003 Hewlett-Packard Co - * David Mosberger-Tang <davidm@hpl.hp.com> - * Copyright (C) 1999 VA Linux Systems - * Copyright (C) 1999 Walt Drummond <drummond@valinux.com> - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/spinlock.h> -#include <linux/string.h> - -#include <asm/delay.h> -#include <asm/page.h> -#include <asm/sal.h> -#include <asm/pal.h> - - __cacheline_aligned DEFINE_SPINLOCK(sal_lock); -unsigned long sal_platform_features; - -unsigned short sal_revision; -unsigned short sal_version; - -#define SAL_MAJOR(x) ((x) >> 8) -#define SAL_MINOR(x) ((x) & 0xff) - -static struct { - void *addr; /* function entry point */ - void *gpval; /* gp value to use */ -} pdesc; - -static long -default_handler (void) -{ - return -1; -} - -ia64_sal_handler ia64_sal = (ia64_sal_handler) default_handler; -ia64_sal_desc_ptc_t *ia64_ptc_domain_info; - -const char * -ia64_sal_strerror (long status) -{ - const char *str; - switch (status) { - case 0: str = "Call completed without error"; break; - case 1: str = "Effect a warm boot of the system to complete " - "the update"; break; - case -1: str = "Not implemented"; break; - case -2: str = "Invalid argument"; break; - case -3: str = "Call completed with error"; break; - case -4: str = "Virtual address not registered"; break; - case -5: str = "No information available"; break; - case -6: str = "Insufficient space to add the entry"; break; - case -7: str = "Invalid entry_addr value"; break; - case -8: str = "Invalid interrupt vector"; break; - case -9: str = "Requested memory not available"; break; - case -10: str = "Unable to write to the NVM device"; break; - case -11: str = "Invalid partition type specified"; break; - case -12: str = "Invalid NVM_Object id specified"; break; - case -13: str = "NVM_Object already has the maximum number " - "of partitions"; break; - case -14: str = "Insufficient space in partition for the " - "requested write sub-function"; break; - case -15: str = "Insufficient data buffer space for the " - "requested read record sub-function"; break; - case -16: str = "Scratch buffer required for the write/delete " - "sub-function"; break; - case -17: str = "Insufficient space in the NVM_Object for the " - "requested create sub-function"; break; - case -18: str = "Invalid value specified in the partition_rec " - "argument"; break; - case -19: str = "Record oriented I/O not supported for this " - "partition"; break; - case -20: str = "Bad format of record to be written or " - "required keyword variable not " - "specified"; break; - default: str = "Unknown SAL status code"; break; - } - return str; -} - -void __init -ia64_sal_handler_init (void *entry_point, void *gpval) -{ - /* fill in the SAL procedure descriptor and point ia64_sal to it: */ - pdesc.addr = entry_point; - pdesc.gpval = gpval; - ia64_sal = (ia64_sal_handler) &pdesc; -} - -static void __init -check_versions (struct ia64_sal_systab *systab) -{ - sal_revision = (systab->sal_rev_major << 8) | systab->sal_rev_minor; - sal_version = (systab->sal_b_rev_major << 8) | systab->sal_b_rev_minor; - - /* Check for broken firmware */ - if ((sal_revision == SAL_VERSION_CODE(49, 29)) - && (sal_version == SAL_VERSION_CODE(49, 29))) - { - /* - * Old firmware for zx2000 prototypes have this weird version number, - * reset it to something sane. - */ - sal_revision = SAL_VERSION_CODE(2, 8); - sal_version = SAL_VERSION_CODE(0, 0); - } -} - -static void __init -sal_desc_entry_point (void *p) -{ - struct ia64_sal_desc_entry_point *ep = p; - ia64_pal_handler_init(__va(ep->pal_proc)); - ia64_sal_handler_init(__va(ep->sal_proc), __va(ep->gp)); -} - -#ifdef CONFIG_SMP -static void __init -set_smp_redirect (int flag) -{ -#ifndef CONFIG_HOTPLUG_CPU - if (no_int_routing) - smp_int_redirect &= ~flag; - else - smp_int_redirect |= flag; -#else - /* - * For CPU Hotplug we dont want to do any chipset supported - * interrupt redirection. The reason is this would require that - * All interrupts be stopped and hard bind the irq to a cpu. - * Later when the interrupt is fired we need to set the redir hint - * on again in the vector. This is cumbersome for something that the - * user mode irq balancer will solve anyways. - */ - no_int_routing=1; - smp_int_redirect &= ~flag; -#endif -} -#else -#define set_smp_redirect(flag) do { } while (0) -#endif - -static void __init -sal_desc_platform_feature (void *p) -{ - struct ia64_sal_desc_platform_feature *pf = p; - sal_platform_features = pf->feature_mask; - - printk(KERN_INFO "SAL Platform features:"); - if (!sal_platform_features) { - printk(" None\n"); - return; - } - - if (sal_platform_features & IA64_SAL_PLATFORM_FEATURE_BUS_LOCK) - printk(" BusLock"); - if (sal_platform_features & IA64_SAL_PLATFORM_FEATURE_IRQ_REDIR_HINT) { - printk(" IRQ_Redirection"); - set_smp_redirect(SMP_IRQ_REDIRECTION); - } - if (sal_platform_features & IA64_SAL_PLATFORM_FEATURE_IPI_REDIR_HINT) { - printk(" IPI_Redirection"); - set_smp_redirect(SMP_IPI_REDIRECTION); - } - if (sal_platform_features & IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT) - printk(" ITC_Drift"); - printk("\n"); -} - -#ifdef CONFIG_SMP -static void __init -sal_desc_ap_wakeup (void *p) -{ - struct ia64_sal_desc_ap_wakeup *ap = p; - - switch (ap->mechanism) { - case IA64_SAL_AP_EXTERNAL_INT: - ap_wakeup_vector = ap->vector; - printk(KERN_INFO "SAL: AP wakeup using external interrupt " - "vector 0x%lx\n", ap_wakeup_vector); - break; - default: - printk(KERN_ERR "SAL: AP wakeup mechanism unsupported!\n"); - break; - } -} - -static void __init -chk_nointroute_opt(void) -{ - char *cp; - - for (cp = boot_command_line; *cp; ) { - if (memcmp(cp, "nointroute", 10) == 0) { - no_int_routing = 1; - printk ("no_int_routing on\n"); - break; - } else { - while (*cp != ' ' && *cp) - ++cp; - while (*cp == ' ') - ++cp; - } - } -} - -#else -static void __init sal_desc_ap_wakeup(void *p) { } -#endif - -/* - * HP rx5670 firmware polls for interrupts during SAL_CACHE_FLUSH by reading - * cr.ivr, but it never writes cr.eoi. This leaves any interrupt marked as - * "in-service" and masks other interrupts of equal or lower priority. - * - * HP internal defect reports: F1859, F2775, F3031. - */ -static int sal_cache_flush_drops_interrupts; - -static int __init -force_pal_cache_flush(char *str) -{ - sal_cache_flush_drops_interrupts = 1; - return 0; -} -early_param("force_pal_cache_flush", force_pal_cache_flush); - -void __init -check_sal_cache_flush (void) -{ - unsigned long flags; - int cpu; - u64 vector, cache_type = 3; - struct ia64_sal_retval isrv; - - if (sal_cache_flush_drops_interrupts) - return; - - cpu = get_cpu(); - local_irq_save(flags); - - /* - * Send ourselves a timer interrupt, wait until it's reported, and see - * if SAL_CACHE_FLUSH drops it. - */ - ia64_send_ipi(cpu, IA64_TIMER_VECTOR, IA64_IPI_DM_INT, 0); - - while (!ia64_get_irr(IA64_TIMER_VECTOR)) - cpu_relax(); - - SAL_CALL(isrv, SAL_CACHE_FLUSH, cache_type, 0, 0, 0, 0, 0, 0); - - if (isrv.status) - printk(KERN_ERR "SAL_CAL_FLUSH failed with %ld\n", isrv.status); - - if (ia64_get_irr(IA64_TIMER_VECTOR)) { - vector = ia64_get_ivr(); - ia64_eoi(); - WARN_ON(vector != IA64_TIMER_VECTOR); - } else { - sal_cache_flush_drops_interrupts = 1; - printk(KERN_ERR "SAL: SAL_CACHE_FLUSH drops interrupts; " - "PAL_CACHE_FLUSH will be used instead\n"); - ia64_eoi(); - } - - local_irq_restore(flags); - put_cpu(); -} - -s64 -ia64_sal_cache_flush (u64 cache_type) -{ - struct ia64_sal_retval isrv; - - if (sal_cache_flush_drops_interrupts) { - unsigned long flags; - u64 progress; - s64 rc; - - progress = 0; - local_irq_save(flags); - rc = ia64_pal_cache_flush(cache_type, - PAL_CACHE_FLUSH_INVALIDATE, &progress, NULL); - local_irq_restore(flags); - return rc; - } - - SAL_CALL(isrv, SAL_CACHE_FLUSH, cache_type, 0, 0, 0, 0, 0, 0); - return isrv.status; -} -EXPORT_SYMBOL_GPL(ia64_sal_cache_flush); - -void __init -ia64_sal_init (struct ia64_sal_systab *systab) -{ - char *p; - int i; - - if (!systab) { - printk(KERN_WARNING "Hmm, no SAL System Table.\n"); - return; - } - - if (strncmp(systab->signature, "SST_", 4) != 0) - printk(KERN_ERR "bad signature in system table!"); - - check_versions(systab); -#ifdef CONFIG_SMP - chk_nointroute_opt(); -#endif - - /* revisions are coded in BCD, so %x does the job for us */ - printk(KERN_INFO "SAL %x.%x: %.32s %.32s%sversion %x.%x\n", - SAL_MAJOR(sal_revision), SAL_MINOR(sal_revision), - systab->oem_id, systab->product_id, - systab->product_id[0] ? " " : "", - SAL_MAJOR(sal_version), SAL_MINOR(sal_version)); - - p = (char *) (systab + 1); - for (i = 0; i < systab->entry_count; i++) { - /* - * The first byte of each entry type contains the type - * descriptor. - */ - switch (*p) { - case SAL_DESC_ENTRY_POINT: - sal_desc_entry_point(p); - break; - case SAL_DESC_PLATFORM_FEATURE: - sal_desc_platform_feature(p); - break; - case SAL_DESC_PTC: - ia64_ptc_domain_info = (ia64_sal_desc_ptc_t *)p; - break; - case SAL_DESC_AP_WAKEUP: - sal_desc_ap_wakeup(p); - break; - } - p += SAL_DESC_SIZE(*p); - } - -} - -int -ia64_sal_oemcall(struct ia64_sal_retval *isrvp, u64 oemfunc, u64 arg1, - u64 arg2, u64 arg3, u64 arg4, u64 arg5, u64 arg6, u64 arg7) -{ - if (oemfunc < IA64_SAL_OEMFUNC_MIN || oemfunc > IA64_SAL_OEMFUNC_MAX) - return -1; - SAL_CALL(*isrvp, oemfunc, arg1, arg2, arg3, arg4, arg5, arg6, arg7); - return 0; -} -EXPORT_SYMBOL(ia64_sal_oemcall); - -int -ia64_sal_oemcall_nolock(struct ia64_sal_retval *isrvp, u64 oemfunc, u64 arg1, - u64 arg2, u64 arg3, u64 arg4, u64 arg5, u64 arg6, - u64 arg7) -{ - if (oemfunc < IA64_SAL_OEMFUNC_MIN || oemfunc > IA64_SAL_OEMFUNC_MAX) - return -1; - SAL_CALL_NOLOCK(*isrvp, oemfunc, arg1, arg2, arg3, arg4, arg5, arg6, - arg7); - return 0; -} -EXPORT_SYMBOL(ia64_sal_oemcall_nolock); - -int -ia64_sal_oemcall_reentrant(struct ia64_sal_retval *isrvp, u64 oemfunc, - u64 arg1, u64 arg2, u64 arg3, u64 arg4, u64 arg5, - u64 arg6, u64 arg7) -{ - if (oemfunc < IA64_SAL_OEMFUNC_MIN || oemfunc > IA64_SAL_OEMFUNC_MAX) - return -1; - SAL_CALL_REENTRANT(*isrvp, oemfunc, arg1, arg2, arg3, arg4, arg5, arg6, - arg7); - return 0; -} -EXPORT_SYMBOL(ia64_sal_oemcall_reentrant); - -long -ia64_sal_freq_base (unsigned long which, unsigned long *ticks_per_second, - unsigned long *drift_info) -{ - struct ia64_sal_retval isrv; - - SAL_CALL(isrv, SAL_FREQ_BASE, which, 0, 0, 0, 0, 0, 0); - *ticks_per_second = isrv.v0; - *drift_info = isrv.v1; - return isrv.status; -} -EXPORT_SYMBOL_GPL(ia64_sal_freq_base); |