diff options
Diffstat (limited to 'arch/m68k/include')
| -rw-r--r-- | arch/m68k/include/asm/Kbuild | 1 | ||||
| -rw-r--r-- | arch/m68k/include/asm/config.h | 2 | ||||
| -rw-r--r-- | arch/m68k/include/asm/dma.h | 483 | ||||
| -rw-r--r-- | arch/m68k/include/asm/elf.h | 9 | ||||
| -rw-r--r-- | arch/m68k/include/asm/export.h | 2 | ||||
| -rw-r--r-- | arch/m68k/include/asm/io.h | 3 | ||||
| -rw-r--r-- | arch/m68k/include/asm/irq.h | 3 | ||||
| -rw-r--r-- | arch/m68k/include/asm/machdep.h | 2 | ||||
| -rw-r--r-- | arch/m68k/include/asm/mmu.h | 4 | ||||
| -rw-r--r-- | arch/m68k/include/asm/pgtable_mm.h | 7 | ||||
| -rw-r--r-- | arch/m68k/include/asm/pgtable_no.h | 3 | ||||
| -rw-r--r-- | arch/m68k/include/asm/raw_io.h | 6 | ||||
| -rw-r--r-- | arch/m68k/include/asm/setup.h | 44 | ||||
| -rw-r--r-- | arch/m68k/include/asm/timex.h | 2 | ||||
| -rw-r--r-- | arch/m68k/include/asm/virt.h | 25 | ||||
| -rw-r--r-- | arch/m68k/include/uapi/asm/bootinfo-virt.h | 18 | ||||
| -rw-r--r-- | arch/m68k/include/uapi/asm/bootinfo.h | 1 | ||||
| -rw-r--r-- | arch/m68k/include/uapi/asm/ptrace.h | 5 |
18 files changed, 114 insertions, 506 deletions
diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild index 0dbf9c5c6fae..1b720299deb1 100644 --- a/arch/m68k/include/asm/Kbuild +++ b/arch/m68k/include/asm/Kbuild @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 generated-y += syscall_table.h +generic-y += export.h generic-y += extable.h generic-y += kvm_para.h generic-y += mcs_spinlock.h diff --git a/arch/m68k/include/asm/config.h b/arch/m68k/include/asm/config.h index e73ffa23c4f5..9bb888ab5009 100644 --- a/arch/m68k/include/asm/config.h +++ b/arch/m68k/include/asm/config.h @@ -17,6 +17,7 @@ extern int mac_parse_bootinfo(const struct bi_record *record); extern int mvme147_parse_bootinfo(const struct bi_record *record); extern int mvme16x_parse_bootinfo(const struct bi_record *record); extern int q40_parse_bootinfo(const struct bi_record *record); +extern int virt_parse_bootinfo(const struct bi_record *record); extern void config_amiga(void); extern void config_apollo(void); @@ -29,5 +30,6 @@ extern void config_mvme16x(void); extern void config_q40(void); extern void config_sun3(void); extern void config_sun3x(void); +extern void config_virt(void); #endif /* _M68K_CONFIG_H */ diff --git a/arch/m68k/include/asm/dma.h b/arch/m68k/include/asm/dma.h index ae2021964e32..f6c5e0dfb4e5 100644 --- a/arch/m68k/include/asm/dma.h +++ b/arch/m68k/include/asm/dma.h @@ -2,493 +2,10 @@ #ifndef _M68K_DMA_H #define _M68K_DMA_H 1 -#ifdef CONFIG_COLDFIRE -/* - * ColdFire DMA Model: - * ColdFire DMA supports two forms of DMA: Single and Dual address. Single - * address mode emits a source address, and expects that the device will either - * pick up the data (DMA READ) or source data (DMA WRITE). This implies that - * the device will place data on the correct byte(s) of the data bus, as the - * memory transactions are always 32 bits. This implies that only 32 bit - * devices will find single mode transfers useful. Dual address DMA mode - * performs two cycles: source read and destination write. ColdFire will - * align the data so that the device will always get the correct bytes, thus - * is useful for 8 and 16 bit devices. This is the mode that is supported - * below. - * - * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000 - * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de) - * - * AUG/25/2000 : added support for 8, 16 and 32-bit Single-Address-Mode (K)2000 - * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de) - * - * APR/18/2002 : added proper support for MCF5272 DMA controller. - * Arthur Shipkowski (art@videon-central.com) - */ - -#include <asm/coldfire.h> -#include <asm/mcfsim.h> -#include <asm/mcfdma.h> - -/* - * Set number of channels of DMA on ColdFire for different implementations. - */ -#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \ - defined(CONFIG_M523x) || defined(CONFIG_M527x) || \ - defined(CONFIG_M528x) || defined(CONFIG_M525x) - -#define MAX_M68K_DMA_CHANNELS 4 -#elif defined(CONFIG_M5272) -#define MAX_M68K_DMA_CHANNELS 1 -#elif defined(CONFIG_M53xx) -#define MAX_M68K_DMA_CHANNELS 0 -#else -#define MAX_M68K_DMA_CHANNELS 2 -#endif - -extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS]; -extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS]; - -#if !defined(CONFIG_M5272) -#define DMA_MODE_WRITE_BIT 0x01 /* Memory/IO to IO/Memory select */ -#define DMA_MODE_WORD_BIT 0x02 /* 8 or 16 bit transfers */ -#define DMA_MODE_LONG_BIT 0x04 /* or 32 bit transfers */ -#define DMA_MODE_SINGLE_BIT 0x08 /* single-address-mode */ - -/* I/O to memory, 8 bits, mode */ -#define DMA_MODE_READ 0 -/* memory to I/O, 8 bits, mode */ -#define DMA_MODE_WRITE 1 -/* I/O to memory, 16 bits, mode */ -#define DMA_MODE_READ_WORD 2 -/* memory to I/O, 16 bits, mode */ -#define DMA_MODE_WRITE_WORD 3 -/* I/O to memory, 32 bits, mode */ -#define DMA_MODE_READ_LONG 4 -/* memory to I/O, 32 bits, mode */ -#define DMA_MODE_WRITE_LONG 5 -/* I/O to memory, 8 bits, single-address-mode */ -#define DMA_MODE_READ_SINGLE 8 -/* memory to I/O, 8 bits, single-address-mode */ -#define DMA_MODE_WRITE_SINGLE 9 -/* I/O to memory, 16 bits, single-address-mode */ -#define DMA_MODE_READ_WORD_SINGLE 10 -/* memory to I/O, 16 bits, single-address-mode */ -#define DMA_MODE_WRITE_WORD_SINGLE 11 -/* I/O to memory, 32 bits, single-address-mode */ -#define DMA_MODE_READ_LONG_SINGLE 12 -/* memory to I/O, 32 bits, single-address-mode */ -#define DMA_MODE_WRITE_LONG_SINGLE 13 - -#else /* CONFIG_M5272 is defined */ - -/* Source static-address mode */ -#define DMA_MODE_SRC_SA_BIT 0x01 -/* Two bits to select between all four modes */ -#define DMA_MODE_SSIZE_MASK 0x06 -/* Offset to shift bits in */ -#define DMA_MODE_SSIZE_OFF 0x01 -/* Destination static-address mode */ -#define DMA_MODE_DES_SA_BIT 0x10 -/* Two bits to select between all four modes */ -#define DMA_MODE_DSIZE_MASK 0x60 -/* Offset to shift bits in */ -#define DMA_MODE_DSIZE_OFF 0x05 -/* Size modifiers */ -#define DMA_MODE_SIZE_LONG 0x00 -#define DMA_MODE_SIZE_BYTE 0x01 -#define DMA_MODE_SIZE_WORD 0x02 -#define DMA_MODE_SIZE_LINE 0x03 - -/* - * Aliases to help speed quick ports; these may be suboptimal, however. They - * do not include the SINGLE mode modifiers since the MCF5272 does not have a - * mode where the device is in control of its addressing. - */ - -/* I/O to memory, 8 bits, mode */ -#define DMA_MODE_READ ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT) -/* memory to I/O, 8 bits, mode */ -#define DMA_MODE_WRITE ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT) -/* I/O to memory, 16 bits, mode */ -#define DMA_MODE_READ_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT) -/* memory to I/O, 16 bits, mode */ -#define DMA_MODE_WRITE_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT) -/* I/O to memory, 32 bits, mode */ -#define DMA_MODE_READ_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT) -/* memory to I/O, 32 bits, mode */ -#define DMA_MODE_WRITE_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT) - -#endif /* !defined(CONFIG_M5272) */ - -#if !defined(CONFIG_M5272) -/* enable/disable a specific DMA channel */ -static __inline__ void enable_dma(unsigned int dmanr) -{ - volatile unsigned short *dmawp; - -#ifdef DMA_DEBUG - printk("enable_dma(dmanr=%d)\n", dmanr); -#endif - - dmawp = (unsigned short *) dma_base_addr[dmanr]; - dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT; -} - -static __inline__ void disable_dma(unsigned int dmanr) -{ - volatile unsigned short *dmawp; - volatile unsigned char *dmapb; - -#ifdef DMA_DEBUG - printk("disable_dma(dmanr=%d)\n", dmanr); -#endif - - dmawp = (unsigned short *) dma_base_addr[dmanr]; - dmapb = (unsigned char *) dma_base_addr[dmanr]; - - /* Turn off external requests, and stop any DMA in progress */ - dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT; - dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE; -} - -/* - * Clear the 'DMA Pointer Flip Flop'. - * Write 0 for LSB/MSB, 1 for MSB/LSB access. - * Use this once to initialize the FF to a known state. - * After that, keep track of it. :-) - * --- In order to do that, the DMA routines below should --- - * --- only be used while interrupts are disabled! --- - * - * This is a NOP for ColdFire. Provide a stub for compatibility. - */ -static __inline__ void clear_dma_ff(unsigned int dmanr) -{ -} - -/* set mode (above) for a specific DMA channel */ -static __inline__ void set_dma_mode(unsigned int dmanr, char mode) -{ - - volatile unsigned char *dmabp; - volatile unsigned short *dmawp; - -#ifdef DMA_DEBUG - printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode); -#endif - - dmabp = (unsigned char *) dma_base_addr[dmanr]; - dmawp = (unsigned short *) dma_base_addr[dmanr]; - - /* Clear config errors */ - dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE; - - /* Set command register */ - dmawp[MCFDMA_DCR] = - MCFDMA_DCR_INT | /* Enable completion irq */ - MCFDMA_DCR_CS | /* Force one xfer per request */ - MCFDMA_DCR_AA | /* Enable auto alignment */ - /* single-address-mode */ - ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) | - /* sets s_rw (-> r/w) high if Memory to I/0 */ - ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) | - /* Memory to I/O or I/O to Memory */ - ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) | - /* 32 bit, 16 bit or 8 bit transfers */ - ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_SSIZE_WORD : - ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG : - MCFDMA_DCR_SSIZE_BYTE)) | - ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_DSIZE_WORD : - ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG : - MCFDMA_DCR_DSIZE_BYTE)); - -#ifdef DEBUG_DMA - printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__, - dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR], - (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]); -#endif -} - -/* Set transfer address for specific DMA channel */ -static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) -{ - volatile unsigned short *dmawp; - volatile unsigned int *dmalp; - -#ifdef DMA_DEBUG - printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a); -#endif - - dmawp = (unsigned short *) dma_base_addr[dmanr]; - dmalp = (unsigned int *) dma_base_addr[dmanr]; - - /* Determine which address registers are used for memory/device accesses */ - if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) { - /* Source incrementing, must be memory */ - dmalp[MCFDMA_SAR] = a; - /* Set dest address, must be device */ - dmalp[MCFDMA_DAR] = dma_device_address[dmanr]; - } else { - /* Destination incrementing, must be memory */ - dmalp[MCFDMA_DAR] = a; - /* Set source address, must be device */ - dmalp[MCFDMA_SAR] = dma_device_address[dmanr]; - } - -#ifdef DEBUG_DMA - printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n", - __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR], - (int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR], - (int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]); -#endif -} - -/* - * Specific for Coldfire - sets device address. - * Should be called after the mode set call, and before set DMA address. - */ -static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a) -{ -#ifdef DMA_DEBUG - printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a); -#endif - - dma_device_address[dmanr] = a; -} - -/* - * NOTE 2: "count" represents _bytes_. - */ -static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) -{ - volatile unsigned short *dmawp; - -#ifdef DMA_DEBUG - printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count); -#endif - - dmawp = (unsigned short *) dma_base_addr[dmanr]; - dmawp[MCFDMA_BCR] = (unsigned short)count; -} - -/* - * Get DMA residue count. After a DMA transfer, this - * should return zero. Reading this while a DMA transfer is - * still in progress will return unpredictable results. - * Otherwise, it returns the number of _bytes_ left to transfer. - */ -static __inline__ int get_dma_residue(unsigned int dmanr) -{ - volatile unsigned short *dmawp; - unsigned short count; - -#ifdef DMA_DEBUG - printk("get_dma_residue(dmanr=%d)\n", dmanr); -#endif - - dmawp = (unsigned short *) dma_base_addr[dmanr]; - count = dmawp[MCFDMA_BCR]; - return((int) count); -} -#else /* CONFIG_M5272 is defined */ - -/* - * The MCF5272 DMA controller is very different than the controller defined above - * in terms of register mapping. For instance, with the exception of the 16-bit - * interrupt register (IRQ#85, for reference), all of the registers are 32-bit. - * - * The big difference, however, is the lack of device-requested DMA. All modes - * are dual address transfer, and there is no 'device' setup or direction bit. - * You can DMA between a device and memory, between memory and memory, or even between - * two devices directly, with any combination of incrementing and non-incrementing - * addresses you choose. This puts a crimp in distinguishing between the 'device - * address' set up by set_dma_device_addr. - * - * Therefore, there are two options. One is to use set_dma_addr and set_dma_device_addr, - * which will act exactly as above in -- it will look to see if the source is set to - * autoincrement, and if so it will make the source use the set_dma_addr value and the - * destination the set_dma_device_addr value. Otherwise the source will be set to the - * set_dma_device_addr value and the destination will get the set_dma_addr value. - * - * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions - * and make it explicit. Depending on what you're doing, one of these two should work - * for you, but don't mix them in the same transfer setup. - */ - -/* enable/disable a specific DMA channel */ -static __inline__ void enable_dma(unsigned int dmanr) -{ - volatile unsigned int *dmalp; - -#ifdef DMA_DEBUG - printk("enable_dma(dmanr=%d)\n", dmanr); -#endif - - dmalp = (unsigned int *) dma_base_addr[dmanr]; - dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN; -} - -static __inline__ void disable_dma(unsigned int dmanr) -{ - volatile unsigned int *dmalp; - -#ifdef DMA_DEBUG - printk("disable_dma(dmanr=%d)\n", dmanr); -#endif - - dmalp = (unsigned int *) dma_base_addr[dmanr]; - - /* Turn off external requests, and stop any DMA in progress */ - dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN; - dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET; -} - -/* - * Clear the 'DMA Pointer Flip Flop'. - * Write 0 for LSB/MSB, 1 for MSB/LSB access. - * Use this once to initialize the FF to a known state. - * After that, keep track of it. :-) - * --- In order to do that, the DMA routines below should --- - * --- only be used while interrupts are disabled! --- - * - * This is a NOP for ColdFire. Provide a stub for compatibility. - */ -static __inline__ void clear_dma_ff(unsigned int dmanr) -{ -} - -/* set mode (above) for a specific DMA channel */ -static __inline__ void set_dma_mode(unsigned int dmanr, char mode) -{ - - volatile unsigned int *dmalp; - volatile unsigned short *dmawp; - -#ifdef DMA_DEBUG - printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode); -#endif - dmalp = (unsigned int *) dma_base_addr[dmanr]; - dmawp = (unsigned short *) dma_base_addr[dmanr]; - - /* Clear config errors */ - dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET; - - /* Set command register */ - dmalp[MCFDMA_DMR] = - MCFDMA_DMR_RQM_DUAL | /* Mandatory Request Mode setting */ - MCFDMA_DMR_DSTT_SD | /* Set up addressing types; set to supervisor-data. */ - MCFDMA_DMR_SRCT_SD | /* Set up addressing types; set to supervisor-data. */ - /* source static-address-mode */ - ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) | - /* dest static-address-mode */ - ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) | - /* burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272 */ - (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) | - (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF); - - dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN; /* Enable completion interrupts */ - -#ifdef DEBUG_DMA - printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__, - dmanr, (int) &dmalp[MCFDMA_DMR], dmalp[MCFDMA_DMR], - (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]); -#endif -} - -/* Set transfer address for specific DMA channel */ -static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) -{ - volatile unsigned int *dmalp; - -#ifdef DMA_DEBUG - printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a); -#endif - - dmalp = (unsigned int *) dma_base_addr[dmanr]; - - /* Determine which address registers are used for memory/device accesses */ - if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) { - /* Source incrementing, must be memory */ - dmalp[MCFDMA_DSAR] = a; - /* Set dest address, must be device */ - dmalp[MCFDMA_DDAR] = dma_device_address[dmanr]; - } else { - /* Destination incrementing, must be memory */ - dmalp[MCFDMA_DDAR] = a; - /* Set source address, must be device */ - dmalp[MCFDMA_DSAR] = dma_device_address[dmanr]; - } - -#ifdef DEBUG_DMA - printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n", - __FILE__, __LINE__, dmanr, (int) &dmalp[MCFDMA_DMR], dmalp[MCFDMA_DMR], - (int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR], - (int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]); -#endif -} - -/* - * Specific for Coldfire - sets device address. - * Should be called after the mode set call, and before set DMA address. - */ -static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a) -{ -#ifdef DMA_DEBUG - printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a); -#endif - - dma_device_address[dmanr] = a; -} - -/* - * NOTE 2: "count" represents _bytes_. - * - * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value. - */ -static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) -{ - volatile unsigned int *dmalp; - -#ifdef DMA_DEBUG - printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count); -#endif - - dmalp = (unsigned int *) dma_base_addr[dmanr]; - dmalp[MCFDMA_DBCR] = count; -} - -/* - * Get DMA residue count. After a DMA transfer, this - * should return zero. Reading this while a DMA transfer is - * still in progress will return unpredictable results. - * Otherwise, it returns the number of _bytes_ left to transfer. - */ -static __inline__ int get_dma_residue(unsigned int dmanr) -{ - volatile unsigned int *dmalp; - unsigned int count; - -#ifdef DMA_DEBUG - printk("get_dma_residue(dmanr=%d)\n", dmanr); -#endif - - dmalp = (unsigned int *) dma_base_addr[dmanr]; - count = dmalp[MCFDMA_DBCR]; - return(count); -} - -#endif /* !defined(CONFIG_M5272) */ -#endif /* CONFIG_COLDFIRE */ - /* it's useless on the m68k, but unfortunately needed by the new bootmem allocator (but this should do it for this) */ #define MAX_DMA_ADDRESS PAGE_OFFSET -#define MAX_DMA_CHANNELS 8 - -extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */ -extern void free_dma(unsigned int dmanr); /* release it again */ - #ifdef CONFIG_PCI extern int isa_dma_bridge_buggy; #else diff --git a/arch/m68k/include/asm/elf.h b/arch/m68k/include/asm/elf.h index 3d387ceaea3f..2def06a99b08 100644 --- a/arch/m68k/include/asm/elf.h +++ b/arch/m68k/include/asm/elf.h @@ -60,6 +60,13 @@ typedef struct user_m68kfp_struct elf_fpregset_t; is actually used on ASV. */ #define ELF_PLAT_INIT(_r, load_addr) _r->a1 = 0 +#define ELF_FDPIC_PLAT_INIT(_r, _exec_map_addr, _interp_map_addr, dynamic_addr) \ + do { \ + (_r)->d3 = _exec_map_addr; \ + (_r)->d4 = _interp_map_addr; \ + (_r)->d5 = dynamic_addr; \ + } while(0) + #if defined(CONFIG_SUN3) || defined(CONFIG_COLDFIRE) #define ELF_EXEC_PAGESIZE 8192 #else @@ -114,4 +121,6 @@ typedef struct user_m68kfp_struct elf_fpregset_t; #define ELF_PLATFORM (NULL) +#define ELF_FDPIC_CORE_EFLAGS 0 + #endif diff --git a/arch/m68k/include/asm/export.h b/arch/m68k/include/asm/export.h deleted file mode 100644 index b53008b67ce1..000000000000 --- a/arch/m68k/include/asm/export.h +++ /dev/null @@ -1,2 +0,0 @@ -#define KCRC_ALIGN 2 -#include <asm-generic/export.h> diff --git a/arch/m68k/include/asm/io.h b/arch/m68k/include/asm/io.h index aabe6420ead2..aaeabc65e63c 100644 --- a/arch/m68k/include/asm/io.h +++ b/arch/m68k/include/asm/io.h @@ -8,6 +8,9 @@ #include <asm/io_mm.h> #endif +#define gf_ioread32 ioread32be +#define gf_iowrite32 iowrite32be + #include <asm-generic/io.h> #endif /* _M68K_IO_H */ diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index 91dd493791d7..7829e955ca04 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -12,7 +12,8 @@ */ #if defined(CONFIG_COLDFIRE) #define NR_IRQS 256 -#elif defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X) +#elif defined(CONFIG_VME) || defined(CONFIG_SUN3) || \ + defined(CONFIG_SUN3X) || defined(CONFIG_VIRT) #define NR_IRQS 200 #elif defined(CONFIG_ATARI) #define NR_IRQS 141 diff --git a/arch/m68k/include/asm/machdep.h b/arch/m68k/include/asm/machdep.h index 8fd80ef1b77e..48d27f1fecc7 100644 --- a/arch/m68k/include/asm/machdep.h +++ b/arch/m68k/include/asm/machdep.h @@ -19,12 +19,10 @@ extern void (*mach_get_model) (char *model); extern void (*mach_get_hardware_list) (struct seq_file *m); /* machine dependent timer functions */ extern int (*mach_hwclk)(int, struct rtc_time*); -extern unsigned int (*mach_get_ss)(void); extern int (*mach_get_rtc_pll)(struct rtc_pll_info *); extern int (*mach_set_rtc_pll)(struct rtc_pll_info *); extern void (*mach_reset)( void ); extern void (*mach_halt)( void ); -extern void (*mach_power_off)( void ); extern unsigned long (*mach_hd_init) (unsigned long, unsigned long); extern void (*mach_hd_setup)(char *, int *); extern void (*mach_heartbeat) (int); diff --git a/arch/m68k/include/asm/mmu.h b/arch/m68k/include/asm/mmu.h index 5c15aacb1370..e00672425b00 100644 --- a/arch/m68k/include/asm/mmu.h +++ b/arch/m68k/include/asm/mmu.h @@ -6,9 +6,7 @@ /* Default "unsigned long" context */ typedef unsigned long mm_context_t; #else -typedef struct { - unsigned long end_brk; -} mm_context_t; +#include <asm-generic/mmu.h> #endif #endif diff --git a/arch/m68k/include/asm/pgtable_mm.h b/arch/m68k/include/asm/pgtable_mm.h index 143ba7de9bda..9b4e2fe2ac82 100644 --- a/arch/m68k/include/asm/pgtable_mm.h +++ b/arch/m68k/include/asm/pgtable_mm.h @@ -80,6 +80,9 @@ #elif defined(CONFIG_COLDFIRE) #define KMAP_START 0xe0000000 #define KMAP_END 0xf0000000 +#elif defined(CONFIG_VIRT) +#define KMAP_START 0xdf000000 +#define KMAP_END 0xff000000 #else #define KMAP_START 0xd0000000 #define KMAP_END 0xf0000000 @@ -92,6 +95,10 @@ extern unsigned long m68k_vmalloc_end; #elif defined(CONFIG_COLDFIRE) #define VMALLOC_START 0xd0000000 #define VMALLOC_END 0xe0000000 +#elif defined(CONFIG_VIRT) +#define VMALLOC_OFFSET PAGE_SIZE +#define VMALLOC_START (((unsigned long) high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)) +#define VMALLOC_END KMAP_START #else /* Just any arbitrary offset to the start of the vmalloc VM area: the * current 8MB value just means that there will be a 8MB "hole" after the diff --git a/arch/m68k/include/asm/pgtable_no.h b/arch/m68k/include/asm/pgtable_no.h index 87151d67d91e..bce5ca56c388 100644 --- a/arch/m68k/include/asm/pgtable_no.h +++ b/arch/m68k/include/asm/pgtable_no.h @@ -42,7 +42,8 @@ extern void paging_init(void); * ZERO_PAGE is a global shared page that is always zero: used * for zero-mapped memory areas etc.. */ -#define ZERO_PAGE(vaddr) (virt_to_page(0)) +extern void *empty_zero_page; +#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) /* * All 32bit addresses are effectively valid for vmalloc... diff --git a/arch/m68k/include/asm/raw_io.h b/arch/m68k/include/asm/raw_io.h index 80eb2396d01e..3ba40bc1dfaa 100644 --- a/arch/m68k/include/asm/raw_io.h +++ b/arch/m68k/include/asm/raw_io.h @@ -80,14 +80,14 @@ ({ u16 __v = le16_to_cpu(*(__force volatile u16 *) (addr)); __v; }) #define rom_out_8(addr, b) \ - ({u8 __maybe_unused __w, __v = (b); u32 _addr = ((u32) (addr)); \ + (void)({u8 __maybe_unused __w, __v = (b); u32 _addr = ((u32) (addr)); \ __w = ((*(__force volatile u8 *) ((_addr | 0x10000) + (__v<<1)))); }) #define rom_out_be16(addr, w) \ - ({u16 __maybe_unused __w, __v = (w); u32 _addr = ((u32) (addr)); \ + (void)({u16 __maybe_unused __w, __v = (w); u32 _addr = ((u32) (addr)); \ __w = ((*(__force volatile u16 *) ((_addr & 0xFFFF0000UL) + ((__v & 0xFF)<<1)))); \ __w = ((*(__force volatile u16 *) ((_addr | 0x10000) + ((__v >> 8)<<1)))); }) #define rom_out_le16(addr, w) \ - ({u16 __maybe_unused __w, __v = (w); u32 _addr = ((u32) (addr)); \ + (void)({u16 __maybe_unused __w, __v = (w); u32 _addr = ((u32) (addr)); \ __w = ((*(__force volatile u16 *) ((_addr & 0xFFFF0000UL) + ((__v >> 8)<<1)))); \ __w = ((*(__force volatile u16 *) ((_addr | 0x10000) + ((__v & 0xFF)<<1)))); }) diff --git a/arch/m68k/include/asm/setup.h b/arch/m68k/include/asm/setup.h index 8f2023f8c1c4..2c99477aaf89 100644 --- a/arch/m68k/include/asm/setup.h +++ b/arch/m68k/include/asm/setup.h @@ -37,7 +37,8 @@ extern unsigned long m68k_machtype; #elif defined(CONFIG_ATARI) || defined(CONFIG_MAC) || defined(CONFIG_APOLLO) \ || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \ || defined(CONFIG_HP300) || defined(CONFIG_Q40) \ - || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) + || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) \ + || defined(CONFIG_VIRT) # define MACH_IS_AMIGA (m68k_machtype == MACH_AMIGA) #else # define MACH_AMIGA_ONLY @@ -50,7 +51,8 @@ extern unsigned long m68k_machtype; #elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_APOLLO) \ || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \ || defined(CONFIG_HP300) || defined(CONFIG_Q40) \ - || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) + || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) \ + || defined(CONFIG_VIRT) # define MACH_IS_ATARI (m68k_machtype == MACH_ATARI) #else # define MACH_ATARI_ONLY @@ -63,7 +65,8 @@ extern unsigned long m68k_machtype; #elif defined(CONFIG_AMIGA) || defined(CONFIG_ATARI) || defined(CONFIG_APOLLO) \ || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \ || defined(CONFIG_HP300) || defined(CONFIG_Q40) \ - || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) + || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) \ + || defined(CONFIG_VIRT) # define MACH_IS_MAC (m68k_machtype == MACH_MAC) #else # define MACH_MAC_ONLY @@ -84,7 +87,8 @@ extern unsigned long m68k_machtype; #elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \ || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000) \ || defined(CONFIG_HP300) || defined(CONFIG_Q40) \ - || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) + || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) \ + || defined(CONFIG_VIRT) # define MACH_IS_APOLLO (m68k_machtype == MACH_APOLLO) #else # define MACH_APOLLO_ONLY @@ -97,7 +101,8 @@ extern unsigned long m68k_machtype; #elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \ || defined(CONFIG_APOLLO) || defined(CONFIG_BVME6000) \ || defined(CONFIG_HP300) || defined(CONFIG_Q40) \ - || defined(CONFIG_SUN3X) || defined(CONFIG_MVME16x) + || defined(CONFIG_SUN3X) || defined(CONFIG_MVME16x) \ + || defined(CONFIG_VIRT) # define MACH_IS_MVME147 (m68k_machtype == MACH_MVME147) #else # define MACH_MVME147_ONLY @@ -110,7 +115,8 @@ extern unsigned long m68k_machtype; #elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \ || defined(CONFIG_APOLLO) || defined(CONFIG_BVME6000) \ || defined(CONFIG_HP300) || defined(CONFIG_Q40) \ - || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) + || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) \ + || defined(CONFIG_VIRT) # define MACH_IS_MVME16x (m68k_machtype == MACH_MVME16x) #else # define MACH_MVME16x_ONLY @@ -123,7 +129,8 @@ extern unsigned long m68k_machtype; #elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \ || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \ || defined(CONFIG_HP300) || defined(CONFIG_Q40) \ - || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) + || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) \ + || defined(CONFIG_VIRT) # define MACH_IS_BVME6000 (m68k_machtype == MACH_BVME6000) #else # define MACH_BVME6000_ONLY @@ -136,7 +143,8 @@ extern unsigned long m68k_machtype; #elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \ || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \ || defined(CONFIG_BVME6000) || defined(CONFIG_Q40) \ - || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) + || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) \ + || defined(CONFIG_VIRT) # define MACH_IS_HP300 (m68k_machtype == MACH_HP300) #else # define MACH_HP300_ONLY @@ -149,7 +157,8 @@ extern unsigned long m68k_machtype; #elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \ || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \ || defined(CONFIG_BVME6000) || defined(CONFIG_HP300) \ - || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) + || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147) \ + || defined(CONFIG_VIRT) # define MACH_IS_Q40 (m68k_machtype == MACH_Q40) #else # define MACH_Q40_ONLY @@ -162,7 +171,8 @@ extern unsigned long m68k_machtype; #elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \ || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \ || defined(CONFIG_BVME6000) || defined(CONFIG_HP300) \ - || defined(CONFIG_Q40) || defined(CONFIG_MVME147) + || defined(CONFIG_Q40) || defined(CONFIG_MVME147) \ + || defined(CONFIG_VIRT) # define MACH_IS_SUN3X (m68k_machtype == MACH_SUN3X) #else # define CONFIG_SUN3X_ONLY @@ -170,6 +180,20 @@ extern unsigned long m68k_machtype; # define MACH_TYPE (MACH_SUN3X) #endif +#if !defined(CONFIG_VIRT) +# define MACH_IS_VIRT (0) +#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \ + || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \ + || defined(CONFIG_BVME6000) || defined(CONFIG_HP300) \ + || defined(CONFIG_Q40) || defined(CONFIG_SUN3X) \ + || defined(CONFIG_MVME147) +# define MACH_IS_VIRT (m68k_machtype == MACH_VIRT) +#else +# define MACH_VIRT_ONLY +# define MACH_IS_VIRT (1) +# define MACH_TYPE (MACH_VIRT) +#endif + #ifndef MACH_TYPE # define MACH_TYPE (m68k_machtype) #endif diff --git a/arch/m68k/include/asm/timex.h b/arch/m68k/include/asm/timex.h index 6a21d9358280..f4a7a340f4ca 100644 --- a/arch/m68k/include/asm/timex.h +++ b/arch/m68k/include/asm/timex.h @@ -35,7 +35,7 @@ static inline unsigned long random_get_entropy(void) { if (mach_random_get_entropy) return mach_random_get_entropy(); - return 0; + return random_get_entropy_fallback(); } #define random_get_entropy random_get_entropy diff --git a/arch/m68k/include/asm/virt.h b/arch/m68k/include/asm/virt.h new file mode 100644 index 000000000000..d3320c954796 --- /dev/null +++ b/arch/m68k/include/asm/virt.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __ASM_VIRT_H +#define __ASM_VIRT_H + +#define NUM_VIRT_SOURCES 200 + +struct virt_booter_device_data { + u32 mmio; + u32 irq; +}; + +struct virt_booter_data { + u32 qemu_version; + struct virt_booter_device_data pic; + struct virt_booter_device_data rtc; + struct virt_booter_device_data tty; + struct virt_booter_device_data ctrl; + struct virt_booter_device_data virtio; +}; + +extern struct virt_booter_data virt_bi_data; + +extern void __init virt_init_IRQ(void); + +#endif diff --git a/arch/m68k/include/uapi/asm/bootinfo-virt.h b/arch/m68k/include/uapi/asm/bootinfo-virt.h new file mode 100644 index 000000000000..e4db7e2213ab --- /dev/null +++ b/arch/m68k/include/uapi/asm/bootinfo-virt.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * asm/bootinfo-virt.h -- Virtual-m68k-specific boot information definitions + */ + +#ifndef _UAPI_ASM_M68K_BOOTINFO_VIRT_H +#define _UAPI_ASM_M68K_BOOTINFO_VIRT_H + +#define BI_VIRT_QEMU_VERSION 0x8000 +#define BI_VIRT_GF_PIC_BASE 0x8001 +#define BI_VIRT_GF_RTC_BASE 0x8002 +#define BI_VIRT_GF_TTY_BASE 0x8003 +#define BI_VIRT_VIRTIO_BASE 0x8004 +#define BI_VIRT_CTRL_BASE 0x8005 + +#define VIRT_BOOTI_VERSION MK_BI_VERSION(2, 0) + +#endif /* _UAPI_ASM_M68K_BOOTINFO_MAC_H */ diff --git a/arch/m68k/include/uapi/asm/bootinfo.h b/arch/m68k/include/uapi/asm/bootinfo.h index 38d3140381fa..203d9cbf9630 100644 --- a/arch/m68k/include/uapi/asm/bootinfo.h +++ b/arch/m68k/include/uapi/asm/bootinfo.h @@ -83,6 +83,7 @@ struct mem_info { #define MACH_SUN3X 11 #define MACH_M54XX 12 #define MACH_M5441X 13 +#define MACH_VIRT 14 /* diff --git a/arch/m68k/include/uapi/asm/ptrace.h b/arch/m68k/include/uapi/asm/ptrace.h index 19a1b9d0d858..5b50ea592e00 100644 --- a/arch/m68k/include/uapi/asm/ptrace.h +++ b/arch/m68k/include/uapi/asm/ptrace.h @@ -74,7 +74,12 @@ struct switch_stack { #define PTRACE_GET_THREAD_AREA 25 +#define PTRACE_GETFDPIC 31 + #define PTRACE_SINGLEBLOCK 33 /* resume execution until next branch */ +#define PTRACE_GETFDPIC_EXEC 0 +#define PTRACE_GETFDPIC_INTERP 1 + #endif /* __ASSEMBLY__ */ #endif /* _UAPI_M68K_PTRACE_H */ |