summaryrefslogtreecommitdiff
path: root/arch/mips/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/Kconfig')
-rw-r--r--arch/mips/Kconfig119
1 files changed, 75 insertions, 44 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index fd7620f025fa..9541171f1220 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -5,9 +5,12 @@ config MIPS
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_ARCH_KGDB
- # Horrible source of confusion. Die, die, die ...
- select EMBEDDED
- select RTC_LIB if !LEMOTE_FULOONG2E
+ select HAVE_FUNCTION_TRACER
+ select HAVE_FUNCTION_TRACE_MCOUNT_TEST
+ select HAVE_DYNAMIC_FTRACE
+ select HAVE_FTRACE_MCOUNT_RECORD
+ select HAVE_FUNCTION_GRAPH_TRACER
+ select RTC_LIB if !MACH_LOONGSON
mainmenu "Linux/MIPS Kernel Configuration"
@@ -22,6 +25,7 @@ choice
config MACH_ALCHEMY
bool "Alchemy processor based machines"
+ select SYS_SUPPORTS_ZBOOT
config AR7
bool "Texas Instruments AR7"
@@ -36,6 +40,7 @@ config AR7
select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_ZBOOT_UART16550
select GENERIC_GPIO
select GCD
select VLYNQ
@@ -43,23 +48,6 @@ config AR7
Support for the Texas Instruments AR7 System-on-a-Chip
family: TNETD7100, 7200 and 7300.
-config BASLER_EXCITE
- bool "Basler eXcite smart camera"
- select CEVT_R4K
- select CSRC_R4K
- select DMA_COHERENT
- select HW_HAS_PCI
- select IRQ_CPU
- select IRQ_CPU_RM7K
- select IRQ_CPU_RM9K
- select MIPS_RM9122
- select SYS_HAS_CPU_RM9000
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_BIG_ENDIAN
- help
- The eXcite is a smart camera platform manufactured by
- Basler Vision Technologies AG.
-
config BCM47XX
bool "BCM47XX based boards"
select CEVT_R4K
@@ -192,6 +180,7 @@ config LASAT
config MACH_LOONGSON
bool "Loongson family of machines"
+ select SYS_SUPPORTS_ZBOOT_UART16550
help
This enables the support of Loongson family of machines.
@@ -233,6 +222,7 @@ config MIPS_MALTA
select SYS_SUPPORTS_MIPS_CMP
select SYS_SUPPORTS_MULTITHREADING
select SYS_SUPPORTS_SMARTMIPS
+ select SYS_SUPPORTS_ZBOOT
help
This enables support for the MIPS Technologies Malta evaluation
board.
@@ -334,6 +324,24 @@ config PMC_YOSEMITE
Yosemite is an evaluation board for the RM9000x2 processor
manufactured by PMC-Sierra.
+config POWERTV
+ bool "Cisco PowerTV"
+ select BOOT_ELF32
+ select CEVT_R4K
+ select CPU_MIPSR2_IRQ_VI
+ select CPU_MIPSR2_IRQ_EI
+ select CSRC_POWERTV
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select SYS_HAS_EARLY_PRINTK
+ select SYS_HAS_CPU_MIPS32_R2
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_HIGHMEM
+ select USB_OHCI_LITTLE_ENDIAN
+ help
+ This enables support for the Cisco PowerTV Platform.
+
config SGI_IP22
bool "SGI IP22 (Indy/Indigo2)"
select ARC
@@ -674,11 +682,11 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
endchoice
source "arch/mips/alchemy/Kconfig"
-source "arch/mips/basler/excite/Kconfig"
source "arch/mips/bcm63xx/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/lasat/Kconfig"
source "arch/mips/pmc-sierra/Kconfig"
+source "arch/mips/powertv/Kconfig"
source "arch/mips/sgi-ip27/Kconfig"
source "arch/mips/sibyte/Kconfig"
source "arch/mips/txx9/Kconfig"
@@ -778,6 +786,9 @@ config CSRC_BCM1480
config CSRC_IOASIC
bool
+config CSRC_POWERTV
+ bool
+
config CSRC_R4K_LIB
bool
@@ -806,20 +817,6 @@ config DMA_NONCOHERENT
config DMA_NEED_PCI_MAP_STATE
bool
-config EARLY_PRINTK
- bool "Early printk" if EMBEDDED && DEBUG_KERNEL
- depends on SYS_HAS_EARLY_PRINTK
- default y
- help
- This option enables special console drivers which allow the kernel
- to print messages very early in the bootup process.
-
- This is useful for kernel debugging when your machine crashes very
- early before the console code is initialized. For normal operation,
- it is not recommended because it looks ugly on some machines and
- doesn't cooperate with an X server. You should normally say N here,
- unless you want to debug such a crash.
-
config SYS_HAS_EARLY_PRINTK
bool
@@ -1069,6 +1066,21 @@ config CPU_LOONGSON2E
The Loongson 2E processor implements the MIPS III instruction set
with many extensions.
+ It has an internal FPGA northbridge, which is compatiable to
+ bonito64.
+
+config CPU_LOONGSON2F
+ bool "Loongson 2F"
+ depends on SYS_HAS_CPU_LOONGSON2F
+ select CPU_LOONGSON2
+ help
+ The Loongson 2F processor implements the MIPS III instruction set
+ with many extensions.
+
+ Loongson2F have built-in DDR2 and PCIX controller. The PCIX controller
+ have a similar programming interface with FPGA northbridge used in
+ Loongson2E.
+
config CPU_MIPS32_R1
bool "MIPS32 Release 1"
depends on SYS_HAS_CPU_MIPS32_R1
@@ -1294,6 +1306,16 @@ config CPU_CAVIUM_OCTEON
endchoice
+config SYS_SUPPORTS_ZBOOT
+ bool
+ select HAVE_KERNEL_GZIP
+ select HAVE_KERNEL_BZIP2
+ select HAVE_KERNEL_LZMA
+
+config SYS_SUPPORTS_ZBOOT_UART16550
+ bool
+ select SYS_SUPPORTS_ZBOOT
+
config CPU_LOONGSON2
bool
select CPU_SUPPORTS_32BIT_KERNEL
@@ -1303,6 +1325,12 @@ config CPU_LOONGSON2
config SYS_HAS_CPU_LOONGSON2E
bool
+config SYS_HAS_CPU_LOONGSON2F
+ bool
+ select CPU_SUPPORTS_CPUFREQ
+ select CPU_SUPPORTS_ADDRWINCFG if 64BIT
+ select CPU_SUPPORTS_UNCACHED_ACCELERATED
+
config SYS_HAS_CPU_MIPS32_R1
bool
@@ -1411,8 +1439,17 @@ config CPU_SUPPORTS_32BIT_KERNEL
bool
config CPU_SUPPORTS_64BIT_KERNEL
bool
+config CPU_SUPPORTS_CPUFREQ
+ bool
+config CPU_SUPPORTS_ADDRWINCFG
+ bool
config CPU_SUPPORTS_HUGEPAGES
bool
+config CPU_SUPPORTS_UNCACHED_ACCELERATED
+ bool
+config MIPS_PGD_C0_CONTEXT
+ bool
+ default y if 64BIT && CPU_MIPSR2
#
# Set to y for ptrace access to watch registers.
@@ -2024,15 +2061,6 @@ config STACKTRACE_SUPPORT
source "init/Kconfig"
-config PROBE_INITRD_HEADER
- bool "Probe initrd header created by addinitrd"
- depends on BLK_DEV_INITRD
- help
- Probe initrd header at the last page of kernel image.
- Say Y here if you are using arch/mips/boot/addinitrd.c to
- add initrd or initramfs image to the kernel image.
- Otherwise, say N.
-
source "kernel/Kconfig.freezer"
menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
@@ -2104,6 +2132,7 @@ config MMU
config I8253
bool
+ select MIPS_EXTERNAL_TIMER
config ZONE_DMA32
bool
@@ -2180,6 +2209,8 @@ source "kernel/power/Kconfig"
endmenu
+source "arch/mips/kernel/cpufreq/Kconfig"
+
source "net/Kconfig"
source "drivers/Kconfig"