diff options
Diffstat (limited to 'arch/mips/Kconfig')
| -rw-r--r-- | arch/mips/Kconfig | 83 |
1 files changed, 8 insertions, 75 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index a0f6e9d0a561..c2f5498d207f 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -16,7 +16,6 @@ config MIPS select ARCH_HAS_UBSAN_SANITIZE_ALL select ARCH_HAS_GCOV_PROFILE_ALL select ARCH_KEEP_MEMBLOCK - select ARCH_SUPPORTS_UPROBES select ARCH_USE_BUILTIN_BSWAP select ARCH_USE_CMPXCHG_LOCKREF if 64BIT select ARCH_USE_MEMTEST @@ -47,6 +46,7 @@ config MIPS select GENERIC_SMP_IDLE_THREAD select GENERIC_TIME_VSYSCALL select GUP_GET_PXX_LOW_HIGH if CPU_MIPS32 && PHYS_ADDR_T_64BIT + select HAS_IOPORT if !NO_IOPORT_MAP || ISA select HAVE_ARCH_COMPILER_H select HAVE_ARCH_JUMP_LABEL select HAVE_ARCH_KGDB if MIPS_FP_SUPPORT @@ -63,10 +63,7 @@ config MIPS select HAVE_DEBUG_STACKOVERFLOW select HAVE_DMA_CONTIGUOUS select HAVE_DYNAMIC_FTRACE - select HAVE_EBPF_JIT if !CPU_MICROMIPS && \ - !CPU_DADDI_WORKAROUNDS && \ - !CPU_R4000_WORKAROUNDS && \ - !CPU_R4400_WORKAROUNDS + select HAVE_EBPF_JIT if !CPU_MICROMIPS select HAVE_EXIT_THREAD select HAVE_FAST_GUP select HAVE_FTRACE_MCOUNT_RECORD @@ -115,7 +112,6 @@ config MACH_INGENIC select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_ZBOOT select DMA_NONCOHERENT - select ARCH_HAS_SYNC_DMA_FOR_CPU select IRQ_MIPS_CPU select PINCTRL select GPIOLIB @@ -134,7 +130,6 @@ choice config MIPS_GENERIC_KERNEL bool "Generic board-agnostic MIPS kernel" - select ARCH_HAS_SETUP_DMA_OPS select MIPS_GENERIC select BOOT_RAW select BUILTIN_DTB @@ -490,7 +485,6 @@ config MACH_LOONGSON64 select BOARD_SCACHE select CSRC_R4K select CEVT_R4K - select CPU_HAS_WB select FORCE_PCI select ISA select I8259 @@ -567,7 +561,6 @@ config MIPS_MALTA select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_MICROMIPS select SYS_SUPPORTS_MIPS16 - select SYS_SUPPORTS_MIPS_CMP select SYS_SUPPORTS_MIPS_CPS select SYS_SUPPORTS_MULTITHREADING select SYS_SUPPORTS_RELOCATABLE @@ -795,24 +788,6 @@ config SGI_IP32 help If you want this kernel to run on SGI O2 workstation, say Y here. -config SIBYTE_CRHINE - bool "Sibyte BCM91120C-CRhine" - select BOOT_ELF32 - select SIBYTE_BCM1120 - select SWAP_IO_SPACE - select SYS_HAS_CPU_SB1 - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_LITTLE_ENDIAN - -config SIBYTE_CARMEL - bool "Sibyte BCM91120x-Carmel" - select BOOT_ELF32 - select SIBYTE_BCM1120 - select SWAP_IO_SPACE - select SYS_HAS_CPU_SB1 - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_LITTLE_ENDIAN - config SIBYTE_CRHONE bool "Sibyte BCM91125C-CRhone" select BOOT_ELF32 @@ -826,7 +801,7 @@ config SIBYTE_CRHONE config SIBYTE_RHONE bool "Sibyte BCM91125E-Rhone" select BOOT_ELF32 - select SIBYTE_BCM1125H + select SIBYTE_SB1250 select SWAP_IO_SPACE select SYS_HAS_CPU_SB1 select SYS_SUPPORTS_BIG_ENDIAN @@ -1077,7 +1052,7 @@ config FW_CFE bool config ARCH_SUPPORTS_UPROBES - bool + def_bool y config DMA_NONCOHERENT bool @@ -1088,8 +1063,10 @@ config DMA_NONCOHERENT # by pgprot_writcombine can be mixed, and the latter sometimes provides # significant advantages. # + select ARCH_HAS_SETUP_DMA_OPS select ARCH_HAS_DMA_WRITE_COMBINE select ARCH_HAS_DMA_PREP_COHERENT + select ARCH_HAS_SYNC_DMA_FOR_CPU select ARCH_HAS_SYNC_DMA_FOR_DEVICE select ARCH_HAS_DMA_SET_UNCACHED select DMA_NONCOHERENT_MMAP @@ -1183,12 +1160,6 @@ config SYS_SUPPORTS_LITTLE_ENDIAN config MIPS_HUGE_TLB_SUPPORT def_bool HUGETLB_PAGE || TRANSPARENT_HUGEPAGE -config IRQ_MSP_SLP - bool - -config IRQ_MSP_CIC - bool - config IRQ_TXX9 bool @@ -1366,7 +1337,6 @@ config CPU_LOONGSON2F bool "Loongson 2F" depends on SYS_HAS_CPU_LOONGSON2F select CPU_LOONGSON2EF - select GPIOLIB help The Loongson 2F processor implements the MIPS III instruction set with many extensions. @@ -1788,7 +1758,6 @@ config CPU_LOONGSON2EF select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_HIGHMEM select CPU_SUPPORTS_HUGEPAGES - select ARCH_HAS_PHYS_TO_DMA config CPU_LOONGSON32 bool @@ -1853,11 +1822,9 @@ config SYS_HAS_CPU_MIPS32_R3_5 config SYS_HAS_CPU_MIPS32_R5 bool - select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT config SYS_HAS_CPU_MIPS32_R6 bool - select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT config SYS_HAS_CPU_MIPS64_R1 bool @@ -1867,15 +1834,12 @@ config SYS_HAS_CPU_MIPS64_R2 config SYS_HAS_CPU_MIPS64_R5 bool - select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT config SYS_HAS_CPU_MIPS64_R6 bool - select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT config SYS_HAS_CPU_P5600 bool - select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT config SYS_HAS_CPU_R3000 bool @@ -1900,7 +1864,6 @@ config SYS_HAS_CPU_NEVADA config SYS_HAS_CPU_R10000 bool - select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT config SYS_HAS_CPU_RM7000 bool @@ -1929,7 +1892,6 @@ config SYS_HAS_CPU_BMIPS4380 config SYS_HAS_CPU_BMIPS5000 bool select SYS_HAS_CPU_BMIPS - select ARCH_HAS_SYNC_DMA_FOR_CPU # # CPU may reorder R->R, R->W, W->R, W->W @@ -2293,15 +2255,10 @@ config MIPS_VPE_LOADER Includes a loader for loading an elf relocatable object onto another VPE and running it. -config MIPS_VPE_LOADER_CMP - bool - default "y" - depends on MIPS_VPE_LOADER && MIPS_CMP - config MIPS_VPE_LOADER_MT bool default "y" - depends on MIPS_VPE_LOADER && !MIPS_CMP + depends on MIPS_VPE_LOADER config MIPS_VPE_LOADER_TOM bool "Load VPE program into memory hidden from linux" @@ -2317,31 +2274,10 @@ config MIPS_VPE_APSP_API bool "Enable support for AP/SP API (RTLX)" depends on MIPS_VPE_LOADER -config MIPS_VPE_APSP_API_CMP - bool - default "y" - depends on MIPS_VPE_APSP_API && MIPS_CMP - config MIPS_VPE_APSP_API_MT bool default "y" - depends on MIPS_VPE_APSP_API && !MIPS_CMP - -config MIPS_CMP - bool "MIPS CMP framework support (DEPRECATED)" - depends on SYS_SUPPORTS_MIPS_CMP && !CPU_MIPSR6 - select SMP - select SYNC_R4K - select SYS_SUPPORTS_SMP - select WEAK_ORDERING - default n - help - Select this if you are using a bootloader which implements the "CMP - framework" protocol (ie. YAMON) and want your kernel to make use of - its ability to start secondary CPUs. - - Unless you have a specific need, you should use CONFIG_MIPS_CPS - instead of this. + depends on MIPS_VPE_APSP_API config MIPS_CPS bool "MIPS Coherent Processing System support" @@ -2797,9 +2733,6 @@ config HOTPLUG_CPU config SMP_UP bool -config SYS_SUPPORTS_MIPS_CMP - bool - config SYS_SUPPORTS_MIPS_CPS bool |