diff options
Diffstat (limited to 'arch/mips/Makefile')
-rw-r--r-- | arch/mips/Makefile | 185 |
1 files changed, 100 insertions, 85 deletions
diff --git a/arch/mips/Makefile b/arch/mips/Makefile index e1c44aed8156..80aecba24892 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -8,8 +8,7 @@ # Copyright (C) 2002, 2003, 2004 Maciej W. Rozycki # # This file is included by the global makefile so that you can add your own -# architecture-specific flags and dependencies. Remember to do have actions -# for "archclean" cleaning up for this architecture. +# architecture-specific flags and dependencies. # archscripts: scripts_basic @@ -50,7 +49,7 @@ tool-archpref = $(64bit-tool-archpref) UTS_MACHINE := mips64 endif -ifneq ($(SUBARCH),$(ARCH)) +ifdef cross_compiling ifeq ($(CROSS_COMPILE),) CROSS_COMPILE := $(call cc-cross-prefix, $(tool-archpref)-linux- $(tool-archpref)-linux-gnu- $(tool-archpref)-unknown-linux-gnu-) endif @@ -96,7 +95,7 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlinuz # crossformat linking we rely on the elf2ecoff tool for format conversion. # cflags-y += -G 0 -mno-abicalls -fno-pic -pipe -cflags-y += -msoft-float +cflags-y += -msoft-float -Wa,-msoft-float LDFLAGS_vmlinux += -G 0 -static -n -nostdlib KBUILD_AFLAGS_MODULE += -mlong-calls KBUILD_CFLAGS_MODULE += -mlong-calls @@ -105,44 +104,10 @@ ifeq ($(CONFIG_RELOCATABLE),y) LDFLAGS_vmlinux += --emit-relocs endif -# -# pass -msoft-float to GAS if it supports it. However on newer binutils -# (specifically newer than 2.24.51.20140728) we then also need to explicitly -# set ".set hardfloat" in all files which manipulate floating point registers. -# -ifneq ($(call as-option,-Wa$(comma)-msoft-float,),) - cflags-y += -DGAS_HAS_SET_HARDFLOAT -Wa,-msoft-float -endif - cflags-y += -ffreestanding -# -# We explicitly add the endianness specifier if needed, this allows -# to compile kernels with a toolchain for the other endianness. We -# carefully avoid to add it redundantly because gcc 3.3/3.4 complains -# when fed the toolchain default! -# -# Certain gcc versions up to gcc 4.1.1 (probably 4.2-subversion as of -# 2006-10-10 don't properly change the predefined symbols if -EB / -EL -# are used, so we kludge that here. A bug has been filed at -# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=29413. -# -# clang doesn't suffer from these issues and our checks against -dumpmachine -# don't work so well when cross compiling, since without providing --target -# clang's output will be based upon the build machine. So for clang we simply -# unconditionally specify -EB or -EL as appropriate. -# -ifdef CONFIG_CC_IS_CLANG cflags-$(CONFIG_CPU_BIG_ENDIAN) += -EB cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -EL -else -undef-all += -UMIPSEB -U_MIPSEB -U__MIPSEB -U__MIPSEB__ -undef-all += -UMIPSEL -U_MIPSEL -U__MIPSEL -U__MIPSEL__ -predef-be += -DMIPSEB -D_MIPSEB -D__MIPSEB -D__MIPSEB__ -predef-le += -DMIPSEL -D_MIPSEL -D__MIPSEL -D__MIPSEL__ -cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB $(undef-all) $(predef-be)) -cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL $(undef-all) $(predef-le)) -endif cflags-$(CONFIG_SB1XXX_CORELIS) += $(call cc-option,-mno-sched-prolog) \ -fno-omit-frame-pointer @@ -161,43 +126,100 @@ cflags-$(CONFIG_SB1XXX_CORELIS) += $(call cc-option,-mno-sched-prolog) \ # cflags-y += -fno-stack-check +# binutils from v2.35 when built with --enable-mips-fix-loongson3-llsc=yes, +# supports an -mfix-loongson3-llsc flag which emits a sync prior to each ll +# instruction to work around a CPU bug (see __SYNC_loongson3_war in asm/sync.h +# for a description). +# +# We disable this in order to prevent the assembler meddling with the +# instruction that labels refer to, ie. if we label an ll instruction: +# +# 1: ll v0, 0(a0) +# +# ...then with the assembler fix applied the label may actually point at a sync +# instruction inserted by the assembler, and if we were using the label in an +# exception table the table would no longer contain the address of the ll +# instruction. +# +# Avoid this by explicitly disabling that assembler behaviour. +# +cflags-y += $(call cc-option,-Wa$(comma)-mno-fix-loongson3-llsc,) + # # CPU-dependent compiler/assembler options for optimization. # -cflags-$(CONFIG_CPU_R3000) += -march=r3000 -cflags-$(CONFIG_CPU_TX39XX) += -march=r3900 -cflags-$(CONFIG_CPU_VR41XX) += -march=r4100 -Wa,--trap -cflags-$(CONFIG_CPU_R4X00) += -march=r4600 -Wa,--trap -cflags-$(CONFIG_CPU_TX49XX) += -march=r4600 -Wa,--trap +cflags-$(CONFIG_CPU_R3000) += $(call cc-option,-march=r3000,-march=mips1) +cflags-$(CONFIG_CPU_R4300) += $(call cc-option,-march=r4300,-march=mips3) -Wa,--trap +cflags-$(CONFIG_CPU_R4X00) += $(call cc-option,-march=r4600,-march=mips3) -Wa,--trap +cflags-$(CONFIG_CPU_TX49XX) += $(call cc-option,-march=r4600,-march=mips3) -Wa,--trap cflags-$(CONFIG_CPU_MIPS32_R1) += -march=mips32 -Wa,--trap cflags-$(CONFIG_CPU_MIPS32_R2) += -march=mips32r2 -Wa,--trap +cflags-$(CONFIG_CPU_MIPS32_R5) += -march=mips32r5 -Wa,--trap -modd-spreg cflags-$(CONFIG_CPU_MIPS32_R6) += -march=mips32r6 -Wa,--trap -modd-spreg cflags-$(CONFIG_CPU_MIPS64_R1) += -march=mips64 -Wa,--trap cflags-$(CONFIG_CPU_MIPS64_R2) += -march=mips64r2 -Wa,--trap +cflags-$(CONFIG_CPU_MIPS64_R5) += -march=mips64r5 -Wa,--trap cflags-$(CONFIG_CPU_MIPS64_R6) += -march=mips64r6 -Wa,--trap -cflags-$(CONFIG_CPU_R5000) += -march=r5000 -Wa,--trap -cflags-$(CONFIG_CPU_R5500) += $(call cc-option,-march=r5500,-march=r5000) \ +cflags-$(CONFIG_CPU_P5600) += $(call cc-option,-march=p5600,-march=mips32r5) \ + -Wa,--trap -modd-spreg +cflags-$(CONFIG_CPU_R5000) += $(call cc-option,-march=r5000,-march=mips4) \ + -Wa,--trap +cflags-$(CONFIG_CPU_R5500) += $(call cc-option,-march=r5500,-march=mips4) \ -Wa,--trap -cflags-$(CONFIG_CPU_NEVADA) += $(call cc-option,-march=rm5200,-march=r5000) \ +cflags-$(CONFIG_CPU_NEVADA) += $(call cc-option,-march=rm5200,-march=mips4) \ -Wa,--trap -cflags-$(CONFIG_CPU_RM7000) += $(call cc-option,-march=rm7000,-march=r5000) \ +cflags-$(CONFIG_CPU_RM7000) += $(call cc-option,-march=rm7000,-march=mips4) \ -Wa,--trap -cflags-$(CONFIG_CPU_SB1) += $(call cc-option,-march=sb1,-march=r5000) \ +cflags-$(CONFIG_CPU_SB1) += $(call cc-option,-march=sb1,-march=mips64r1) \ -Wa,--trap cflags-$(CONFIG_CPU_SB1) += $(call cc-option,-mno-mdmx) cflags-$(CONFIG_CPU_SB1) += $(call cc-option,-mno-mips3d) -cflags-$(CONFIG_CPU_R10000) += $(call cc-option,-march=r10000,-march=r8000) \ +cflags-$(CONFIG_CPU_R10000) += $(call cc-option,-march=r10000,-march=mips4) \ -Wa,--trap -cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += $(call cc-option,-march=octeon) -Wa,--trap -ifeq (,$(findstring march=octeon, $(cflags-$(CONFIG_CPU_CAVIUM_OCTEON)))) -cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -Wa,-march=octeon -endif +cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -march=octeon -Wa,--trap cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1 -cflags-$(CONFIG_CPU_BMIPS) += -march=mips32 -Wa,-mips32 -Wa,--trap +cflags-$(CONFIG_CPU_BMIPS) += -march=mips32 -Wa,--trap + +cflags-$(CONFIG_CPU_LOONGSON2E) += \ + $(call cc-option,-march=loongson2e,-march=mips3) -Wa,--trap +cflags-$(CONFIG_CPU_LOONGSON2F) += \ + $(call cc-option,-march=loongson2f,-march=mips3) -Wa,--trap +# Some -march= flags enable MMI instructions, and GCC complains about that +# support being enabled alongside -msoft-float. Thus explicitly disable MMI. +cflags-$(CONFIG_CPU_LOONGSON2EF) += $(call cc-option,-mno-loongson-mmi) +cflags-$(CONFIG_CPU_LOONGSON64) += \ + $(call cc-option,-march=loongson3a,-march=mips64r2) -Wa,--trap +cflags-$(CONFIG_CPU_LOONGSON64) += $(call cc-option,-mno-loongson-mmi) cflags-$(CONFIG_CPU_R4000_WORKAROUNDS) += $(call cc-option,-mfix-r4000,) cflags-$(CONFIG_CPU_R4400_WORKAROUNDS) += $(call cc-option,-mfix-r4400,) cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS) += $(call cc-option,-mno-daddi,) +ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS +cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa,-mfix-loongson2f-nop +cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa,-mfix-loongson2f-jump +endif + +# +# Some versions of binutils, not currently mainline as of 2019/02/04, support +# an -mfix-loongson3-llsc flag which emits a sync prior to each ll instruction +# to work around a CPU bug (see __SYNC_loongson3_war in asm/sync.h for a +# description). +# +# We disable this in order to prevent the assembler meddling with the +# instruction that labels refer to, ie. if we label an ll instruction: +# +# 1: ll v0, 0(a0) +# +# ...then with the assembler fix applied the label may actually point at a sync +# instruction inserted by the assembler, and if we were using the label in an +# exception table the table would no longer contain the address of the ll +# instruction. +# +# Avoid this by explicitly disabling that assembler behaviour. If upstream +# binutils does not merge support for the flag then we can revisit & remove +# this later - for now it ensures vendor toolchains don't cause problems. +# +cflags-$(CONFIG_CPU_LOONGSON64) += $(call as-option,-Wa$(comma)-mno-fix-loongson3-llsc,) # For smartmips configurations, there are hundreds of warnings due to ISA overrides # in assembly and header files. smartmips is only supported for MIPS32r1 onwards @@ -256,7 +278,7 @@ endif # # Board-dependent options and extra files # -include arch/mips/Kbuild.platforms +include $(srctree)/arch/mips/Kbuild.platforms ifdef CONFIG_PHYSICAL_START load-y = $(CONFIG_PHYSICAL_START) @@ -275,12 +297,12 @@ drivers-$(CONFIG_PCI) += arch/mips/pci/ ifdef CONFIG_64BIT ifndef KBUILD_SYM32 ifeq ($(shell expr $(load-y) \< 0xffffffff80000000), 0) - KBUILD_SYM32 = y + KBUILD_SYM32 = $(call cc-option-yn, -msym32) endif endif - ifeq ($(KBUILD_SYM32)$(call cc-option-yn,-msym32), yy) - cflags-y += -msym32 -DKBUILD_64BIT_SYM32 + ifeq ($(KBUILD_SYM32), y) + cflags-$(KBUILD_SYM32) += -msym32 -DKBUILD_64BIT_SYM32 else ifeq ($(CONFIG_CPU_DADDI_WORKAROUNDS), y) $(error CONFIG_CPU_DADDI_WORKAROUNDS unsupported without -msym32) @@ -288,12 +310,23 @@ ifdef CONFIG_64BIT endif endif +# When linking a 32-bit executable the LLVM linker cannot cope with a +# 32-bit load address that has been sign-extended to 64 bits. Simply +# remove the upper 32 bits then, as it is safe to do so with other +# linkers. +ifdef CONFIG_64BIT + load-ld = $(load-y) +else + load-ld = $(subst 0xffffffff,0x,$(load-y)) +endif + KBUILD_AFLAGS += $(cflags-y) KBUILD_CFLAGS += $(cflags-y) -KBUILD_CPPFLAGS += -DVMLINUX_LOAD_ADDRESS=$(load-y) +KBUILD_CPPFLAGS += -DVMLINUX_LOAD_ADDRESS=$(load-y) -DLINKER_LOAD_ADDRESS=$(load-ld) KBUILD_CPPFLAGS += -DDATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0) bootvars-y = VMLINUX_LOAD_ADDRESS=$(load-y) \ + LINKER_LOAD_ADDRESS=$(load-ld) \ VMLINUX_ENTRY_ADDRESS=$(entry-y) \ PLATFORM="$(platform-y)" \ ITS_INPUTS="$(its-y)" @@ -310,24 +343,18 @@ KBUILD_CFLAGS += -fno-asynchronous-unwind-tables KBUILD_LDFLAGS += -m $(ld-emul) -ifdef CONFIG_MIPS -CHECKFLAGS += $(shell $(CC) $(KBUILD_CFLAGS) -dM -E -x c /dev/null | \ - egrep -vw '__GNUC_(|MINOR_|PATCHLEVEL_)_' | \ +ifdef need-compiler +CHECKFLAGS += $(shell $(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) -dM -E -x c /dev/null | \ + grep -E -vw '__GNUC_(MINOR_|PATCHLEVEL_)?_' | \ sed -e "s/^\#define /-D'/" -e "s/ /'='/" -e "s/$$/'/" -e 's/\$$/&&/g') endif OBJCOPYFLAGS += --remove-section=.reginfo -head-y := arch/mips/kernel/head.o - libs-y += arch/mips/lib/ libs-$(CONFIG_MIPS_FP_SUPPORT) += arch/mips/math-emu/ -# See arch/mips/Kbuild for content of core part of the kernel -core-y += arch/mips/ - drivers-y += arch/mips/crypto/ -drivers-$(CONFIG_OPROFILE) += arch/mips/oprofile/ # suspend and hibernation support drivers-$(CONFIG_PM) += arch/mips/power/ @@ -336,14 +363,12 @@ drivers-$(CONFIG_PM) += arch/mips/power/ boot-y := vmlinux.bin boot-y += vmlinux.ecoff boot-y += vmlinux.srec -ifeq ($(shell expr $(load-y) \< 0xffffffff80000000 2> /dev/null), 0) boot-y += uImage boot-y += uImage.bin boot-y += uImage.bz2 boot-y += uImage.gz boot-y += uImage.lzma boot-y += uImage.lzo -endif boot-y += vmlinux.itb boot-y += vmlinux.gz.itb boot-y += vmlinux.bz2.itb @@ -355,15 +380,8 @@ bootz-y := vmlinuz bootz-y += vmlinuz.bin bootz-y += vmlinuz.ecoff bootz-y += vmlinuz.srec -ifeq ($(shell expr $(zload-y) \< 0xffffffff80000000 2> /dev/null), 0) bootz-y += uzImage.bin -endif - -ifdef CONFIG_LASAT -rom.bin rom.sw: vmlinux - $(Q)$(MAKE) $(build)=arch/mips/lasat/image \ - $(bootvars-y) $@ -endif +bootz-y += vmlinuz.itb # # Some machines like the Indy need 32-bit ELF binaries for booting purposes. @@ -395,7 +413,7 @@ ifdef CONFIG_SYS_SUPPORTS_ZBOOT # boot/compressed $(bootz-y): $(vmlinux-32) FORCE $(Q)$(MAKE) $(build)=arch/mips/boot/compressed \ - $(bootvars-y) 32bit-bfd=$(32bit-bfd) $@ + $(bootvars-y) 32bit-bfd=$(32bit-bfd) arch/mips/boot/$@ else vmlinuz: FORCE @echo ' CONFIG_SYS_SUPPORTS_ZBOOT is not enabled' @@ -426,12 +444,6 @@ endif $(Q)install -D -m 644 .config $(INSTALL_PATH)/config-$(KERNELRELEASE) $(Q)install -D -m 644 System.map $(INSTALL_PATH)/System.map-$(KERNELRELEASE) -archclean: - $(Q)$(MAKE) $(clean)=arch/mips/boot - $(Q)$(MAKE) $(clean)=arch/mips/boot/compressed - $(Q)$(MAKE) $(clean)=arch/mips/boot/tools - $(Q)$(MAKE) $(clean)=arch/mips/lasat - archheaders: $(Q)$(MAKE) $(build)=arch/mips/kernel/syscalls all @@ -561,6 +573,9 @@ sead3micro_defconfig-y := micro32r2el_defconfig BOARDS=sead-3 legacy_defconfigs += xilfpga_defconfig xilfpga_defconfig-y := 32r2el_defconfig BOARDS=xilfpga +legacy_defconfigs += pistachio_defconfig +pistachio_defconfig-y := 32r2el_defconfig BOARDS=marduk + .PHONY: $(legacy_defconfigs) $(legacy_defconfigs): $(Q)$(MAKE) -f $(srctree)/Makefile $($@-y) |