diff options
Diffstat (limited to 'arch/mips/alchemy/devboards/db1000.c')
| -rw-r--r-- | arch/mips/alchemy/devboards/db1000.c | 87 |
1 files changed, 49 insertions, 38 deletions
diff --git a/arch/mips/alchemy/devboards/db1000.c b/arch/mips/alchemy/devboards/db1000.c index 2c52ee27b4f2..6984cd5169b5 100644 --- a/arch/mips/alchemy/devboards/db1000.c +++ b/arch/mips/alchemy/devboards/db1000.c @@ -10,16 +10,16 @@ #include <linux/dma-mapping.h> #include <linux/gpio.h> #include <linux/gpio/machine.h> +#include <linux/gpio/property.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/leds.h> #include <linux/mmc/host.h> -#include <linux/module.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/pm.h> #include <linux/spi/spi.h> #include <linux/spi/spi_gpio.h> -#include <linux/spi/ads7846.h> #include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/gpio-au1000.h> #include <asm/mach-au1x00/au1000_dma.h> @@ -165,14 +165,10 @@ static struct platform_device db1x00_audio_dev = { /******************************************************************************/ +#ifdef CONFIG_MMC_AU1X static irqreturn_t db1100_mmc_cd(int irq, void *ptr) { - void (*mmc_cd)(struct mmc_host *, unsigned long); - /* link against CONFIG_MMC=m */ - mmc_cd = symbol_get(mmc_detect_change); - mmc_cd(ptr, msecs_to_jiffies(500)); - symbol_put(mmc_detect_change); - + mmc_detect_change(ptr, msecs_to_jiffies(500)); return IRQ_HANDLED; } @@ -375,17 +371,24 @@ static struct platform_device db1100_mmc1_dev = { .num_resources = ARRAY_SIZE(au1100_mmc1_res), .resource = au1100_mmc1_res, }; +#endif /* CONFIG_MMC_AU1X */ /******************************************************************************/ -static struct ads7846_platform_data db1100_touch_pd = { - .model = 7846, - .vref_mv = 3300, - .gpio_pendown = 21, +static const struct software_node db1100_alchemy2_gpiochip = { + .name = "alchemy-gpio2", }; -static struct spi_gpio_platform_data db1100_spictl_pd = { - .num_chipselect = 1, +static const struct property_entry db1100_ads7846_properties[] = { + PROPERTY_ENTRY_U16("ti,vref_min", 3300), + PROPERTY_ENTRY_GPIO("pendown-gpios", + &db1100_alchemy2_gpiochip, 21, GPIO_ACTIVE_LOW), + { } +}; + +static const struct software_node db1100_ads7846_swnode = { + .name = "ads7846", + .properties = db1100_ads7846_properties, }; static struct spi_board_info db1100_spi_info[] __initdata = { @@ -396,37 +399,37 @@ static struct spi_board_info db1100_spi_info[] __initdata = { .chip_select = 0, .mode = 0, .irq = AU1100_GPIO21_INT, - .platform_data = &db1100_touch_pd, + .swnode = &db1100_ads7846_swnode, }, }; -static struct platform_device db1100_spi_dev = { - .name = "spi_gpio", - .id = 0, - .dev = { - .platform_data = &db1100_spictl_pd, - .dma_mask = &au1xxx_all_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, +static const struct spi_gpio_platform_data db1100_spictl_pd __initconst = { + .num_chipselect = 1, }; /* * Alchemy GPIO 2 has its base at 200 so the GPIO lines * 207 thru 210 are GPIOs at offset 7 thru 10 at this chip. */ -static struct gpiod_lookup_table db1100_spi_gpiod_table = { - .dev_id = "spi_gpio", - .table = { - GPIO_LOOKUP("alchemy-gpio2", 9, - "sck", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("alchemy-gpio2", 8, - "mosi", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("alchemy-gpio2", 7, - "miso", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("alchemy-gpio2", 10, - "cs", GPIO_ACTIVE_HIGH), - { }, - }, +static const struct property_entry db1100_spi_dev_properties[] __initconst = { + PROPERTY_ENTRY_GPIO("miso-gpios", + &db1100_alchemy2_gpiochip, 7, GPIO_ACTIVE_HIGH), + PROPERTY_ENTRY_GPIO("mosi-gpios", + &db1100_alchemy2_gpiochip, 8, GPIO_ACTIVE_HIGH), + PROPERTY_ENTRY_GPIO("sck-gpios", + &db1100_alchemy2_gpiochip, 9, GPIO_ACTIVE_HIGH), + PROPERTY_ENTRY_GPIO("cs-gpios", + &db1100_alchemy2_gpiochip, 10, GPIO_ACTIVE_HIGH), + { } +}; + +static const struct platform_device_info db1100_spi_dev_info __initconst = { + .name = "spi_gpio", + .id = 0, + .data = &db1100_spictl_pd, + .size_data = sizeof(db1100_spictl_pd), + .dma_mask = DMA_BIT_MASK(32), + .properties = db1100_spi_dev_properties, }; static struct platform_device *db1x00_devs[] = { @@ -438,16 +441,20 @@ static struct platform_device *db1x00_devs[] = { static struct platform_device *db1100_devs[] = { &au1100_lcd_device, +#ifdef CONFIG_MMC_AU1X &db1100_mmc0_dev, &db1100_mmc1_dev, +#endif }; int __init db1000_dev_setup(void) { int board = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)); int c0, c1, d0, d1, s0, s1, flashsize = 32, twosocks = 1; + int err; unsigned long pfc; struct clk *c, *p; + struct platform_device *spi_dev; if (board == BCSR_WHOAMI_DB1500) { c0 = AU1500_GPIO2_INT; @@ -474,6 +481,7 @@ int __init db1000_dev_setup(void) pfc |= (1 << 0); /* SSI0 pins as GPIOs */ alchemy_wrsys(pfc, AU1000_SYS_PINFUNC); + software_node_register(&db1100_alchemy2_gpiochip); spi_register_board_info(db1100_spi_info, ARRAY_SIZE(db1100_spi_info)); @@ -490,8 +498,11 @@ int __init db1000_dev_setup(void) clk_put(p); platform_add_devices(db1100_devs, ARRAY_SIZE(db1100_devs)); - gpiod_add_lookup_table(&db1100_spi_gpiod_table); - platform_device_register(&db1100_spi_dev); + + spi_dev = platform_device_register_full(&db1100_spi_dev_info); + err = PTR_ERR_OR_ZERO(spi_dev); + if (err) + pr_err("failed to register SPI controller: %d\n", err); } else if (board == BCSR_WHOAMI_DB1000) { c0 = AU1000_GPIO2_INT; c1 = AU1000_GPIO5_INT; |