19 files changed, 173 insertions, 243 deletions

diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig
index 83b288b95b16..6ca81e1bd35c 100644
--- a/arch/mips/alchemy/Kconfig
+++ b/arch/mips/alchemy/Kconfig
@@ -1,12 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
-# au1000-style gpio and interrupt controllers
-config ALCHEMY_GPIOINT_AU1000
-	bool
-
-# au1300-style GPIO/INT controller
-config ALCHEMY_GPIOINT_AU1300
-	bool
-
 choice
 	prompt "Machine type"
 	depends on MIPS_ALCHEMY
@@ -15,7 +7,6 @@ choice
 config MIPS_MTX1
 	bool "4G Systems MTX-1 board"
 	select HAVE_PCI
-	select ALCHEMY_GPIOINT_AU1000
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 
@@ -23,6 +14,7 @@ config MIPS_DB1XXX
 	bool "Alchemy DB1XXX / PB1XXX boards"
 	select GPIOLIB
 	select HAVE_PCI
+	select HAVE_PATA_PLATFORM
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 	help
@@ -33,13 +25,11 @@ config MIPS_DB1XXX
 
 config MIPS_XXS1500
 	bool "MyCable XXS1500 board"
-	select ALCHEMY_GPIOINT_AU1000
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_GPR
 	bool "Trapeze ITS GPR board"
-	select ALCHEMY_GPIOINT_AU1000
 	select HAVE_PCI
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
diff --git a/arch/mips/alchemy/Platform b/arch/mips/alchemy/Platform
index 33c9da3b077b..c8cff50b0eda 100644
--- a/arch/mips/alchemy/Platform
+++ b/arch/mips/alchemy/Platform
@@ -15,19 +15,16 @@ load-$(CONFIG_MIPS_DB1XXX)	+= 0xffffffff80100000
 #
 # 4G-Systems MTX-1 "MeshCube" wireless router
 #
-platform-$(CONFIG_MIPS_MTX1)	+= alchemy/
 load-$(CONFIG_MIPS_MTX1)	+= 0xffffffff80100000
 
 #
 # MyCable eval board
 #
-platform-$(CONFIG_MIPS_XXS1500) += alchemy/
 load-$(CONFIG_MIPS_XXS1500)	+= 0xffffffff80100000
 
 #
 # Trapeze ITS GRP board
 #
-platform-$(CONFIG_MIPS_GPR)	+= alchemy/
 load-$(CONFIG_MIPS_GPR)		+= 0xffffffff80100000
 
 # boards can specify their own <gpio.h> in one of their include dirs.
diff --git a/arch/mips/alchemy/board-gpr.c b/arch/mips/alchemy/board-gpr.c
index 6c47318946e4..f587c40b6d00 100644
--- a/arch/mips/alchemy/board-gpr.c
+++ b/arch/mips/alchemy/board-gpr.c
@@ -31,23 +31,6 @@ const char *get_system_type(void)
 	return "GPR";
 }
 
-void __init prom_init(void)
-{
-	unsigned char *memsize_str;
-	unsigned long memsize;
-
-	prom_argc = fw_arg0;
-	prom_argv = (char **)fw_arg1;
-	prom_envp = (char **)fw_arg2;
-
-	prom_init_cmdline();
-
-	memsize_str = prom_getenv("memsize");
-	if (!memsize_str || kstrtoul(memsize_str, 0, &memsize))
-		memsize = 0x04000000;
-	add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
-
 void prom_putchar(char c)
 {
 	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
diff --git a/arch/mips/alchemy/board-mtx1.c b/arch/mips/alchemy/board-mtx1.c
index 23093535399f..68ea57511629 100644
--- a/arch/mips/alchemy/board-mtx1.c
+++ b/arch/mips/alchemy/board-mtx1.c
@@ -30,23 +30,6 @@ const char *get_system_type(void)
 	return "MTX-1";
 }
 
-void __init prom_init(void)
-{
-	unsigned char *memsize_str;
-	unsigned long memsize;
-
-	prom_argc = fw_arg0;
-	prom_argv = (char **)fw_arg1;
-	prom_envp = (char **)fw_arg2;
-
-	prom_init_cmdline();
-
-	memsize_str = prom_getenv("memsize");
-	if (!memsize_str || kstrtoul(memsize_str, 0, &memsize))
-		memsize = 0x04000000;
-	add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
-
 void prom_putchar(char c)
 {
 	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
diff --git a/arch/mips/alchemy/board-xxs1500.c b/arch/mips/alchemy/board-xxs1500.c
index c67dfe1f4997..f175bce2987f 100644
--- a/arch/mips/alchemy/board-xxs1500.c
+++ b/arch/mips/alchemy/board-xxs1500.c
@@ -18,6 +18,7 @@
 #include <asm/reboot.h>
 #include <asm/setup.h>
 #include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/gpio-au1000.h>
 #include <prom.h>
 
 const char *get_system_type(void)
@@ -25,24 +26,6 @@ const char *get_system_type(void)
 	return "XXS1500";
 }
 
-void __init prom_init(void)
-{
-	unsigned char *memsize_str;
-	unsigned long memsize;
-
-	prom_argc = fw_arg0;
-	prom_argv = (char **)fw_arg1;
-	prom_envp = (char **)fw_arg2;
-
-	prom_init_cmdline();
-
-	memsize_str = prom_getenv("memsize");
-	if (!memsize_str || kstrtoul(memsize_str, 0, &memsize))
-		memsize = 0x04000000;
-
-	add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
-
 void prom_putchar(char c)
 {
 	alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
diff --git a/arch/mips/alchemy/common/clock.c b/arch/mips/alchemy/common/clock.c
index a95a894aceaf..6c8996e20a7d 100644
--- a/arch/mips/alchemy/common/clock.c
+++ b/arch/mips/alchemy/common/clock.c
@@ -111,7 +111,7 @@ static struct clk_aliastable {
 /* access locks to SYS_FREQCTRL0/1 and SYS_CLKSRC registers */
 static spinlock_t alchemy_clk_fg0_lock;
 static spinlock_t alchemy_clk_fg1_lock;
-static spinlock_t alchemy_clk_csrc_lock;
+static DEFINE_SPINLOCK(alchemy_clk_csrc_lock);
 
 /* CPU Core clock *****************************************************/
 
@@ -152,6 +152,7 @@ static struct clk __init *alchemy_clk_setup_cpu(const char *parent_name,
 {
 	struct clk_init_data id;
 	struct clk_hw *h;
+	struct clk *clk;
 
 	h = kzalloc(sizeof(*h), GFP_KERNEL);
 	if (!h)
@@ -164,7 +165,13 @@ static struct clk __init *alchemy_clk_setup_cpu(const char *parent_name,
 	id.ops = &alchemy_clkops_cpu;
 	h->init = &id;
 
-	return clk_register(NULL, h);
+	clk = clk_register(NULL, h);
+	if (IS_ERR(clk)) {
+		pr_err("failed to register clock\n");
+		kfree(h);
+	}
+
+	return clk;
 }
 
 /* AUXPLLs ************************************************************/
@@ -764,7 +771,7 @@ static int __init alchemy_clk_init_fgens(int ctype)
 	}
 	id.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE;
 
-	a = kzalloc((sizeof(*a)) * 6, GFP_KERNEL);
+	a = kcalloc(6, sizeof(*a), GFP_KERNEL);
 	if (!a)
 		return -ENOMEM;
 
@@ -989,7 +996,6 @@ static int __init alchemy_clk_setup_imux(int ctype)
 	if (!a)
 		return -ENOMEM;
 
-	spin_lock_init(&alchemy_clk_csrc_lock);
 	ret = 0;
 
 	for (i = 0; i < 6; i++) {
diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c
index 4ca2c28878e0..6a3c890f7bbf 100644
--- a/arch/mips/alchemy/common/dbdma.c
+++ b/arch/mips/alchemy/common/dbdma.c
@@ -30,6 +30,7 @@
  *
  */
 
+#include <linux/dma-map-ops.h> /* for dma_default_coherent */
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
@@ -574,7 +575,7 @@ u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
 		dp++;
 	}
 
-	/* Make last descrptor point to the first. */
+	/* Make last descriptor point to the first. */
 	dp--;
 	dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(ctp->chan_desc_base));
 	ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base;
@@ -623,17 +624,18 @@ u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags)
 		dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
 
 	/*
-	 * There is an errata on the Au1200/Au1550 parts that could result
-	 * in "stale" data being DMA'ed. It has to do with the snoop logic on
-	 * the cache eviction buffer.  DMA_NONCOHERENT is on by default for
-	 * these parts. If it is fixed in the future, these dma_cache_inv will
-	 * just be nothing more than empty macros. See io.h.
+	 * There is an erratum on certain Au1200/Au1550 revisions that could
+	 * result in "stale" data being DMA'ed. It has to do with the snoop
+	 * logic on the cache eviction buffer.  dma_default_coherent is set
+	 * to false on these parts.
 	 */
-	dma_cache_wback_inv((unsigned long)buf, nbytes);
+	if (!dma_default_coherent)
+		dma_cache_wback_inv(KSEG0ADDR(buf), nbytes);
 	dp->dscr_cmd0 |= DSCR_CMD0_V;	/* Let it rip */
 	wmb(); /* drain writebuffer */
 	dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
 	ctp->chan_ptr->ddma_dbell = 0;
+	wmb(); /* force doorbell write out to dma engine */
 
 	/* Get next descriptor pointer. */
 	ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
@@ -685,17 +687,18 @@ u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags)
 			  dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1);
 #endif
 	/*
-	 * There is an errata on the Au1200/Au1550 parts that could result in
-	 * "stale" data being DMA'ed. It has to do with the snoop logic on the
-	 * cache eviction buffer.  DMA_NONCOHERENT is on by default for these
-	 * parts. If it is fixed in the future, these dma_cache_inv will just
-	 * be nothing more than empty macros. See io.h.
+	 * There is an erratum on certain Au1200/Au1550 revisions that could
+	 * result in "stale" data being DMA'ed. It has to do with the snoop
+	 * logic on the cache eviction buffer.  dma_default_coherent is set
+	 * to false on these parts.
 	 */
-	dma_cache_inv((unsigned long)buf, nbytes);
+	if (!dma_default_coherent)
+		dma_cache_inv(KSEG0ADDR(buf), nbytes);
 	dp->dscr_cmd0 |= DSCR_CMD0_V;	/* Let it rip */
 	wmb(); /* drain writebuffer */
 	dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
 	ctp->chan_ptr->ddma_dbell = 0;
+	wmb(); /* force doorbell write out to dma engine */
 
 	/* Get next descriptor pointer. */
 	ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
diff --git a/arch/mips/alchemy/common/dma.c b/arch/mips/alchemy/common/dma.c
index 973049b5bd61..44d8433b1f45 100644
--- a/arch/mips/alchemy/common/dma.c
+++ b/arch/mips/alchemy/common/dma.c
@@ -131,29 +131,6 @@ static const struct dma_dev dma_dev_table_bank2[DMA_NUM_DEV_BANK2] = {
 	{ AU1100_SD1_PHYS_ADDR + 0x04, DMA_DS | DMA_DW8 | DMA_DR }	/* coherent */
 };
 
-void dump_au1000_dma_channel(unsigned int dmanr)
-{
-	struct dma_chan *chan;
-
-	if (dmanr >= NUM_AU1000_DMA_CHANNELS)
-		return;
-	chan = &au1000_dma_table[dmanr];
-
-	printk(KERN_INFO "Au1000 DMA%d Register Dump:\n", dmanr);
-	printk(KERN_INFO "  mode = 0x%08x\n",
-	       __raw_readl(chan->io + DMA_MODE_SET));
-	printk(KERN_INFO "  addr = 0x%08x\n",
-	       __raw_readl(chan->io + DMA_PERIPHERAL_ADDR));
-	printk(KERN_INFO "  start0 = 0x%08x\n",
-	       __raw_readl(chan->io + DMA_BUFFER0_START));
-	printk(KERN_INFO "  start1 = 0x%08x\n",
-	       __raw_readl(chan->io + DMA_BUFFER1_START));
-	printk(KERN_INFO "  count0 = 0x%08x\n",
-	       __raw_readl(chan->io + DMA_BUFFER0_COUNT));
-	printk(KERN_INFO "  count1 = 0x%08x\n",
-	       __raw_readl(chan->io + DMA_BUFFER1_COUNT));
-}
-
 /*
  * Finds a free channel, and binds the requested device to it.
  * Returns the allocated channel number, or negative on error.
diff --git a/arch/mips/alchemy/common/gpiolib.c b/arch/mips/alchemy/common/gpiolib.c
index 7d5da5edd74d..1b16daaa86ae 100644
--- a/arch/mips/alchemy/common/gpiolib.c
+++ b/arch/mips/alchemy/common/gpiolib.c
@@ -23,8 +23,6 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  *
  *  Notes :
- *	This file must ONLY be built when CONFIG_GPIOLIB=y and
- *	 CONFIG_ALCHEMY_GPIO_INDIRECT=n, otherwise compilation will fail!
  *	au1000 SoC have only one GPIO block : GPIO1
  *	Au1100, Au15x0, Au12x0 have a second one : GPIO2
  *	Au1300 is totally different: 1 block with up to 128 GPIOs
@@ -33,7 +31,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 #include <asm/mach-au1x00/gpio-au1000.h>
 #include <asm/mach-au1x00/gpio-au1300.h>
 
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index b8f3397c59c9..da74cae6b43a 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -51,9 +51,9 @@ static void alchemy_8250_pm(struct uart_port *port, unsigned int state,
 #define PORT(_base, _irq)					\
 	{							\
 		.mapbase	= _base,			\
+		.mapsize	= 0x1000,			\
 		.irq		= _irq,				\
 		.regshift	= 2,				\
-		.iotype		= UPIO_AU,			\
 		.flags		= UPF_SKIP_TEST | UPF_IOREMAP | \
 				  UPF_FIXED_TYPE,		\
 		.type		= PORT_16550A,			\
@@ -124,8 +124,14 @@ static void __init alchemy_setup_uarts(int ctype)
 	au1xx0_uart_device.dev.platform_data = ports;
 
 	/* Fill up uartclk. */
-	for (s = 0; s < c; s++)
+	for (s = 0; s < c; s++) {
 		ports[s].uartclk = uartclk;
+		if (au_platform_setup(&ports[s]) < 0) {
+			kfree(ports);
+			printk(KERN_INFO "Alchemy: missing support for UARTs\n");
+			return;
+		}
+	}
 	if (platform_device_register(&au1xx0_uart_device))
 		printk(KERN_INFO "Alchemy: failed to register UARTs\n");
 }
@@ -403,8 +409,8 @@ static void __init alchemy_setup_macs(int ctype)
 	if (alchemy_get_macs(ctype) < 1)
 		return;
 
-	macres = kmemdup(au1xxx_eth0_resources[ctype],
-			 sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
+	macres = kmemdup_array(au1xxx_eth0_resources[ctype], MAC_RES_COUNT,
+			       sizeof(*macres), GFP_KERNEL);
 	if (!macres) {
 		printk(KERN_INFO "Alchemy: no memory for MAC0 resources\n");
 		return;
@@ -424,8 +430,8 @@ static void __init alchemy_setup_macs(int ctype)
 	if (alchemy_get_macs(ctype) < 2)
 		return;
 
-	macres = kmemdup(au1xxx_eth1_resources[ctype],
-			 sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
+	macres = kmemdup_array(au1xxx_eth1_resources[ctype], MAC_RES_COUNT,
+			       sizeof(*macres), GFP_KERNEL);
 	if (!macres) {
 		printk(KERN_INFO "Alchemy: no memory for MAC1 resources\n");
 		return;
diff --git a/arch/mips/alchemy/common/prom.c b/arch/mips/alchemy/common/prom.c
index af312b5e33f6..20d30f6265cd 100644
--- a/arch/mips/alchemy/common/prom.c
+++ b/arch/mips/alchemy/common/prom.c
@@ -34,9 +34,13 @@
  */
 
 #include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/memblock.h>
+#include <linux/sizes.h>
 #include <linux/string.h>
 
 #include <asm/bootinfo.h>
+#include <prom.h>
 
 int prom_argc;
 char **prom_argv;
@@ -76,6 +80,24 @@ char *prom_getenv(char *envname)
 	return NULL;
 }
 
+void __init prom_init(void)
+{
+	unsigned char *memsize_str;
+	unsigned long memsize;
+
+	prom_argc = (int)fw_arg0;
+	prom_argv = (char **)fw_arg1;
+	prom_envp = (char **)fw_arg2;
+
+	prom_init_cmdline();
+
+	memsize_str = prom_getenv("memsize");
+	if (!memsize_str || kstrtoul(memsize_str, 0, &memsize))
+		memsize = SZ_64M; /* minimum memsize is 64MB RAM */
+
+	memblock_add(0, memsize);
+}
+
 static inline unsigned char str2hexnum(unsigned char c)
 {
 	if (c >= '0' && c <= '9')
@@ -122,7 +144,3 @@ int __init prom_get_ethernet_addr(char *ethernet_addr)
 
 	return 0;
 }
-
-void __init prom_free_prom_memory(void)
-{
-}
diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
index 7faaa6d593a7..a7a6d31a7a41 100644
--- a/arch/mips/alchemy/common/setup.c
+++ b/arch/mips/alchemy/common/setup.c
@@ -27,14 +27,30 @@
 
 #include <linux/init.h>
 #include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/dma-map-ops.h> /* for dma_default_coherent */
 
-#include <asm/dma-coherence.h>
+#include <asm/bootinfo.h>
 #include <asm/mipsregs.h>
 
 #include <au1000.h>
 
-extern void __init board_setup(void);
-extern void __init alchemy_set_lpj(void);
+static bool alchemy_dma_coherent(void)
+{
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+	case ALCHEMY_CPU_AU1500:
+	case ALCHEMY_CPU_AU1100:
+		return false;
+	case ALCHEMY_CPU_AU1200:
+		/* Au1200 AB USB does not support coherent memory */
+		if ((read_c0_prid() & PRID_REV_MASK) == 0)
+			return false;
+		return true;
+	default:
+		return true;
+	}
+}
 
 void __init plat_mem_setup(void)
 {
@@ -47,20 +63,7 @@ void __init plat_mem_setup(void)
 		/* Clear to obtain best system bus performance */
 		clear_c0_config(1 << 19); /* Clear Config[OD] */
 
-	hw_coherentio = 0;
-	coherentio = IO_COHERENCE_ENABLED;
-	switch (alchemy_get_cputype()) {
-	case ALCHEMY_CPU_AU1000:
-	case ALCHEMY_CPU_AU1500:
-	case ALCHEMY_CPU_AU1100:
-		coherentio = IO_COHERENCE_DISABLED;
-		break;
-	case ALCHEMY_CPU_AU1200:
-		/* Au1200 AB USB does not support coherent memory */
-		if (0 == (read_c0_prid() & PRID_REV_MASK))
-			coherentio = IO_COHERENCE_DISABLED;
-		break;
-	}
+	dma_default_coherent = alchemy_dma_coherent();
 
 	board_setup();	/* board specific setup */
 
@@ -72,9 +75,9 @@ void __init plat_mem_setup(void)
 	iomem_resource.end = IOMEM_RESOURCE_END;
 }
 
-#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_PCI)
+#ifdef CONFIG_MIPS_FIXUP_BIGPHYS_ADDR
 /* This routine should be valid for all Au1x based boards */
-phys_addr_t __fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
+phys_addr_t fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
 {
 	unsigned long start = ALCHEMY_PCI_MEMWIN_START;
 	unsigned long end = ALCHEMY_PCI_MEMWIN_END;
@@ -90,5 +93,13 @@ phys_addr_t __fixup_bigphys_addr(phys_addr_t phys_addr, phys_addr_t size)
 	/* default nop */
 	return phys_addr;
 }
-EXPORT_SYMBOL(__fixup_bigphys_addr);
-#endif
+
+int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long vaddr,
+		unsigned long pfn, unsigned long size, pgprot_t prot)
+{
+	phys_addr_t phys_addr = fixup_bigphys_addr(pfn << PAGE_SHIFT, size);
+
+	return remap_pfn_range(vma, vaddr, phys_addr >> PAGE_SHIFT, size, prot);
+}
+EXPORT_SYMBOL(io_remap_pfn_range);
+#endif /* CONFIG_MIPS_FIXUP_BIGPHYS_ADDR */
diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
index 3a21a6a18da7..d794ffb67412 100644
--- a/arch/mips/alchemy/common/time.c
+++ b/arch/mips/alchemy/common/time.c
@@ -72,13 +72,6 @@ static struct clock_event_device au1x_rtcmatch2_clockdev = {
 	.cpumask	= cpu_possible_mask,
 };
 
-static struct irqaction au1x_rtcmatch2_irqaction = {
-	.handler	= au1x_rtcmatch2_irq,
-	.flags		= IRQF_TIMER,
-	.name		= "timer",
-	.dev_id		= &au1x_rtcmatch2_clockdev,
-};
-
 static int __init alchemy_time_init(unsigned int m2int)
 {
 	struct clock_event_device *cd = &au1x_rtcmatch2_clockdev;
@@ -130,7 +123,9 @@ static int __init alchemy_time_init(unsigned int m2int)
 	cd->min_delta_ns = clockevent_delta2ns(9, cd);
 	cd->min_delta_ticks = 9;	/* ~0.28ms */
 	clockevents_register_device(cd);
-	setup_irq(m2int, &au1x_rtcmatch2_irqaction);
+	if (request_irq(m2int, au1x_rtcmatch2_irq, IRQF_TIMER, "timer",
+			&au1x_rtcmatch2_clockdev))
+		pr_err("Failed to register timer interrupt\n");
 
 	printk(KERN_INFO "Alchemy clocksource installed\n");
 
diff --git a/arch/mips/alchemy/devboards/db1000.c b/arch/mips/alchemy/devboards/db1000.c
index 2c52ee27b4f2..6984cd5169b5 100644
--- a/arch/mips/alchemy/devboards/db1000.c
+++ b/arch/mips/alchemy/devboards/db1000.c
@@ -10,16 +10,16 @@
 #include <linux/dma-mapping.h>
 #include <linux/gpio.h>
 #include <linux/gpio/machine.h>
+#include <linux/gpio/property.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/leds.h>
 #include <linux/mmc/host.h>
-#include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/pm.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_gpio.h>
-#include <linux/spi/ads7846.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/gpio-au1000.h>
 #include <asm/mach-au1x00/au1000_dma.h>
@@ -165,14 +165,10 @@ static struct platform_device db1x00_audio_dev = {
 
 /******************************************************************************/
 
+#ifdef CONFIG_MMC_AU1X
 static irqreturn_t db1100_mmc_cd(int irq, void *ptr)
 {
-	void (*mmc_cd)(struct mmc_host *, unsigned long);
-	/* link against CONFIG_MMC=m */
-	mmc_cd = symbol_get(mmc_detect_change);
-	mmc_cd(ptr, msecs_to_jiffies(500));
-	symbol_put(mmc_detect_change);
-
+	mmc_detect_change(ptr, msecs_to_jiffies(500));
 	return IRQ_HANDLED;
 }
 
@@ -375,17 +371,24 @@ static struct platform_device db1100_mmc1_dev = {
 	.num_resources	= ARRAY_SIZE(au1100_mmc1_res),
 	.resource	= au1100_mmc1_res,
 };
+#endif /* CONFIG_MMC_AU1X */
 
 /******************************************************************************/
 
-static struct ads7846_platform_data db1100_touch_pd = {
-	.model		= 7846,
-	.vref_mv	= 3300,
-	.gpio_pendown	= 21,
+static const struct software_node db1100_alchemy2_gpiochip = {
+	.name	= "alchemy-gpio2",
 };
 
-static struct spi_gpio_platform_data db1100_spictl_pd = {
-	.num_chipselect = 1,
+static const struct property_entry db1100_ads7846_properties[] = {
+	PROPERTY_ENTRY_U16("ti,vref_min", 3300),
+	PROPERTY_ENTRY_GPIO("pendown-gpios",
+			    &db1100_alchemy2_gpiochip, 21, GPIO_ACTIVE_LOW),
+	{ }
+};
+
+static const struct software_node db1100_ads7846_swnode = {
+	.name		= "ads7846",
+	.properties	= db1100_ads7846_properties,
 };
 
 static struct spi_board_info db1100_spi_info[] __initdata = {
@@ -396,37 +399,37 @@ static struct spi_board_info db1100_spi_info[] __initdata = {
 		.chip_select	 = 0,
 		.mode		 = 0,
 		.irq		 = AU1100_GPIO21_INT,
-		.platform_data	 = &db1100_touch_pd,
+		.swnode		 = &db1100_ads7846_swnode,
 	},
 };
 
-static struct platform_device db1100_spi_dev = {
-	.name		= "spi_gpio",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &db1100_spictl_pd,
-		.dma_mask		= &au1xxx_all_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
+static const struct spi_gpio_platform_data db1100_spictl_pd __initconst = {
+	.num_chipselect = 1,
 };
 
 /*
  * Alchemy GPIO 2 has its base at 200 so the GPIO lines
  * 207 thru 210 are GPIOs at offset 7 thru 10 at this chip.
  */
-static struct gpiod_lookup_table db1100_spi_gpiod_table = {
-	.dev_id         = "spi_gpio",
-	.table          = {
-		GPIO_LOOKUP("alchemy-gpio2", 9,
-			    "sck", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("alchemy-gpio2", 8,
-			    "mosi", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("alchemy-gpio2", 7,
-			    "miso", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("alchemy-gpio2", 10,
-			    "cs", GPIO_ACTIVE_HIGH),
-		{ },
-	},
+static const struct property_entry db1100_spi_dev_properties[] __initconst = {
+	PROPERTY_ENTRY_GPIO("miso-gpios",
+			    &db1100_alchemy2_gpiochip, 7, GPIO_ACTIVE_HIGH),
+	PROPERTY_ENTRY_GPIO("mosi-gpios",
+			    &db1100_alchemy2_gpiochip, 8, GPIO_ACTIVE_HIGH),
+	PROPERTY_ENTRY_GPIO("sck-gpios",
+			    &db1100_alchemy2_gpiochip, 9, GPIO_ACTIVE_HIGH),
+	PROPERTY_ENTRY_GPIO("cs-gpios",
+			    &db1100_alchemy2_gpiochip, 10, GPIO_ACTIVE_HIGH),
+	{ }
+};
+
+static const struct platform_device_info db1100_spi_dev_info __initconst = {
+	.name		= "spi_gpio",
+	.id		= 0,
+	.data		= &db1100_spictl_pd,
+	.size_data	= sizeof(db1100_spictl_pd),
+        .dma_mask	= DMA_BIT_MASK(32),
+	.properties	= db1100_spi_dev_properties,
 };
 
 static struct platform_device *db1x00_devs[] = {
@@ -438,16 +441,20 @@ static struct platform_device *db1x00_devs[] = {
 
 static struct platform_device *db1100_devs[] = {
 	&au1100_lcd_device,
+#ifdef CONFIG_MMC_AU1X
 	&db1100_mmc0_dev,
 	&db1100_mmc1_dev,
+#endif
 };
 
 int __init db1000_dev_setup(void)
 {
 	int board = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
 	int c0, c1, d0, d1, s0, s1, flashsize = 32,  twosocks = 1;
+	int err;
 	unsigned long pfc;
 	struct clk *c, *p;
+	struct platform_device *spi_dev;
 
 	if (board == BCSR_WHOAMI_DB1500) {
 		c0 = AU1500_GPIO2_INT;
@@ -474,6 +481,7 @@ int __init db1000_dev_setup(void)
 		pfc |= (1 << 0);	/* SSI0 pins as GPIOs */
 		alchemy_wrsys(pfc, AU1000_SYS_PINFUNC);
 
+		software_node_register(&db1100_alchemy2_gpiochip);
 		spi_register_board_info(db1100_spi_info,
 					ARRAY_SIZE(db1100_spi_info));
 
@@ -490,8 +498,11 @@ int __init db1000_dev_setup(void)
 			clk_put(p);
 
 		platform_add_devices(db1100_devs, ARRAY_SIZE(db1100_devs));
-		gpiod_add_lookup_table(&db1100_spi_gpiod_table);
-		platform_device_register(&db1100_spi_dev);
+
+		spi_dev = platform_device_register_full(&db1100_spi_dev_info);
+		err = PTR_ERR_OR_ZERO(spi_dev);
+		if (err)
+			pr_err("failed to register SPI controller: %d\n", err);
 	} else if (board == BCSR_WHOAMI_DB1000) {
 		c0 = AU1000_GPIO2_INT;
 		c1 = AU1000_GPIO5_INT;
diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c
index 421d651433b6..67f067706af2 100644
--- a/arch/mips/alchemy/devboards/db1200.c
+++ b/arch/mips/alchemy/devboards/db1200.c
@@ -10,7 +10,6 @@
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
-#include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/leds.h>
@@ -327,6 +326,7 @@ static struct platform_device db1200_ide_dev = {
 
 /**********************************************************************/
 
+#ifdef CONFIG_MMC_AU1X
 /* SD carddetects:  they're supposed to be edge-triggered, but ack
  * doesn't seem to work (CPLD Rev 2).  Instead, the screaming one
  * is disabled and its counterpart enabled.  The 200ms timeout is
@@ -340,14 +340,7 @@ static irqreturn_t db1200_mmc_cd(int irq, void *ptr)
 
 static irqreturn_t db1200_mmc_cdfn(int irq, void *ptr)
 {
-	void (*mmc_cd)(struct mmc_host *, unsigned long);
-
-	/* link against CONFIG_MMC=m */
-	mmc_cd = symbol_get(mmc_detect_change);
-	if (mmc_cd) {
-		mmc_cd(ptr, msecs_to_jiffies(200));
-		symbol_put(mmc_detect_change);
-	}
+	mmc_detect_change(ptr, msecs_to_jiffies(200));
 
 	msleep(100);	/* debounce */
 	if (irq == DB1200_SD0_INSERT_INT)
@@ -431,14 +424,7 @@ static irqreturn_t pb1200_mmc1_cd(int irq, void *ptr)
 
 static irqreturn_t pb1200_mmc1_cdfn(int irq, void *ptr)
 {
-	void (*mmc_cd)(struct mmc_host *, unsigned long);
-
-	/* link against CONFIG_MMC=m */
-	mmc_cd = symbol_get(mmc_detect_change);
-	if (mmc_cd) {
-		mmc_cd(ptr, msecs_to_jiffies(200));
-		symbol_put(mmc_detect_change);
-	}
+	mmc_detect_change(ptr, msecs_to_jiffies(200));
 
 	msleep(100);	/* debounce */
 	if (irq == PB1200_SD1_INSERT_INT)
@@ -599,6 +585,7 @@ static struct platform_device pb1200_mmc1_dev = {
 	.num_resources	= ARRAY_SIZE(au1200_mmc1_res),
 	.resource	= au1200_mmc1_res,
 };
+#endif /* CONFIG_MMC_AU1X */
 
 /**********************************************************************/
 
@@ -766,7 +753,9 @@ static struct platform_device db1200_audiodma_dev = {
 static struct platform_device *db1200_devs[] __initdata = {
 	NULL,		/* PSC0, selected by S6.8 */
 	&db1200_ide_dev,
+#ifdef CONFIG_MMC_AU1X
 	&db1200_mmc0_dev,
+#endif
 	&au1200_lcd_dev,
 	&db1200_eth_dev,
 	&db1200_nand_dev,
@@ -777,7 +766,9 @@ static struct platform_device *db1200_devs[] __initdata = {
 };
 
 static struct platform_device *pb1200_devs[] __initdata = {
+#ifdef CONFIG_MMC_AU1X
 	&pb1200_mmc1_dev,
+#endif
 };
 
 /* Some peripheral base addresses differ on the PB1200 */
@@ -835,7 +826,7 @@ int __init db1200_dev_setup(void)
 	if (!IS_ERR(c)) {
 		pfc = clk_round_rate(c, 50000000);
 		if ((pfc < 1) || (abs(50000000 - pfc) > 2500000))
-			pr_warn("DB1200: cant get I2C close to 50MHz\n");
+			pr_warn("DB1200: can't get I2C close to 50MHz\n");
 		else
 			clk_set_rate(c, pfc);
 		clk_prepare_enable(c);
@@ -856,7 +847,7 @@ int __init db1200_dev_setup(void)
 	i2c_register_board_info(0, db1200_i2c_devs,
 				ARRAY_SIZE(db1200_i2c_devs));
 	spi_register_board_info(db1200_spi_devs,
-				ARRAY_SIZE(db1200_i2c_devs));
+				ARRAY_SIZE(db1200_spi_devs));
 
 	/* SWITCHES:	S6.8 I2C/SPI selector  (OFF=I2C	 ON=SPI)
 	 *		S6.7 AC97/I2S selector (OFF=AC97 ON=I2S)
diff --git a/arch/mips/alchemy/devboards/db1300.c b/arch/mips/alchemy/devboards/db1300.c
index 8ac1f56ee57d..d377e043b49f 100644
--- a/arch/mips/alchemy/devboards/db1300.c
+++ b/arch/mips/alchemy/devboards/db1300.c
@@ -17,7 +17,6 @@
 #include <linux/interrupt.h>
 #include <linux/ata_platform.h>
 #include <linux/mmc/host.h>
-#include <linux/module.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/platnand.h>
 #include <linux/platform_device.h>
@@ -451,6 +450,7 @@ static struct platform_device db1300_ide_dev = {
 
 /**********************************************************************/
 
+#ifdef CONFIG_MMC_AU1X
 static irqreturn_t db1300_mmc_cd(int irq, void *ptr)
 {
 	disable_irq_nosync(irq);
@@ -459,14 +459,7 @@ static irqreturn_t db1300_mmc_cd(int irq, void *ptr)
 
 static irqreturn_t db1300_mmc_cdfn(int irq, void *ptr)
 {
-	void (*mmc_cd)(struct mmc_host *, unsigned long);
-
-	/* link against CONFIG_MMC=m.  We can only be called once MMC core has
-	 * initialized the controller, so symbol_get() should always succeed.
-	 */
-	mmc_cd = symbol_get(mmc_detect_change);
-	mmc_cd(ptr, msecs_to_jiffies(200));
-	symbol_put(mmc_detect_change);
+	mmc_detect_change(ptr, msecs_to_jiffies(200));
 
 	msleep(100);	/* debounce */
 	if (irq == DB1300_SD1_INSERT_INT)
@@ -640,6 +633,7 @@ static struct platform_device db1300_sd0_dev = {
 	.resource	= au1300_sd0_res,
 	.num_resources	= ARRAY_SIZE(au1300_sd0_res),
 };
+#endif /* CONFIG_MMC_AU1X */
 
 /**********************************************************************/
 
@@ -731,16 +725,8 @@ static struct platform_device db1300_lcd_dev = {
 
 /**********************************************************************/
 
-static void db1300_wm97xx_irqen(struct wm97xx *wm, int enable)
-{
-	if (enable)
-		enable_irq(DB1300_AC97_PEN_INT);
-	else
-		disable_irq_nosync(DB1300_AC97_PEN_INT);
-}
-
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_WM97XX)
 static struct wm97xx_mach_ops db1300_wm97xx_ops = {
-	.irq_enable	= db1300_wm97xx_irqen,
 	.irq_gpio	= WM97XX_GPIO_3,
 };
 
@@ -762,6 +748,12 @@ static int db1300_wm97xx_probe(struct platform_device *pdev)
 
 	return wm97xx_register_mach_ops(wm, &db1300_wm97xx_ops);
 }
+#else
+static int db1300_wm97xx_probe(struct platform_device *pdev)
+{
+	return -ENODEV;
+}
+#endif
 
 static struct platform_driver db1300_wm97xx_driver = {
 	.driver.name	= "wm97xx-touch",
@@ -777,8 +769,10 @@ static struct platform_device *db1300_dev[] __initdata = {
 	&db1300_5waysw_dev,
 	&db1300_nand_dev,
 	&db1300_ide_dev,
+#ifdef CONFIG_MMC_AU1X
 	&db1300_sd0_dev,
 	&db1300_sd1_dev,
+#endif
 	&db1300_lcd_dev,
 	&db1300_ac97_dev,
 	&db1300_i2s_dev,
diff --git a/arch/mips/alchemy/devboards/db1550.c b/arch/mips/alchemy/devboards/db1550.c
index 3e0c75c0ece0..6c6837181f55 100644
--- a/arch/mips/alchemy/devboards/db1550.c
+++ b/arch/mips/alchemy/devboards/db1550.c
@@ -66,6 +66,7 @@ int __init db1550_board_setup(void)
 	case BCSR_WHOAMI_PB1550_DDR:
 		bcsr_init(PB1550_BCSR_PHYS_ADDR,
 			  PB1550_BCSR_PHYS_ADDR + PB1550_BCSR_HEXLED_OFS);
+		break;
 	case BCSR_WHOAMI_DB1550:
 		break;
 	default:
@@ -225,7 +226,7 @@ static void __init pb1550_nand_setup(void)
 	case 0: case 2: case 8: case 0xC: case 0xD:
 		/* x16 NAND Flash */
 		pb1550_nand_pd.devwidth = 1;
-		/* fallthrough */
+		fallthrough;
 	case 1: case 3: case 9: case 0xE: case 0xF:
 		/* x8 NAND, already set up */
 		platform_device_register(&pb1550_nand_dev);
@@ -588,7 +589,7 @@ int __init db1550_dev_setup(void)
 	i2c_register_board_info(0, db1550_i2c_devs,
 				ARRAY_SIZE(db1550_i2c_devs));
 	spi_register_board_info(db1550_spi_devs,
-				ARRAY_SIZE(db1550_i2c_devs));
+				ARRAY_SIZE(db1550_spi_devs));
 
 	c = clk_get(NULL, "psc0_intclk");
 	if (!IS_ERR(c)) {
diff --git a/arch/mips/alchemy/devboards/platform.c b/arch/mips/alchemy/devboards/platform.c
index 8d4b65c3268a..754bdd2ca630 100644
--- a/arch/mips/alchemy/devboards/platform.c
+++ b/arch/mips/alchemy/devboards/platform.c
@@ -20,23 +20,6 @@
 
 #include <prom.h>
 
-void __init prom_init(void)
-{
-	unsigned char *memsize_str;
-	unsigned long memsize;
-
-	prom_argc = (int)fw_arg0;
-	prom_argv = (char **)fw_arg1;
-	prom_envp = (char **)fw_arg2;
-
-	prom_init_cmdline();
-	memsize_str = prom_getenv("memsize");
-	if (!memsize_str || kstrtoul(memsize_str, 0, &memsize))
-		memsize = 64 << 20; /* all devboards have at least 64MB RAM */
-
-	add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
-
 void prom_putchar(char c)
 {
 	if (alchemy_get_cputype() == ALCHEMY_CPU_AU1300)
diff --git a/arch/mips/alchemy/devboards/pm.c b/arch/mips/alchemy/devboards/pm.c
index 73c77814687a..b17a0d199851 100644
--- a/arch/mips/alchemy/devboards/pm.c
+++ b/arch/mips/alchemy/devboards/pm.c
@@ -17,7 +17,7 @@
  * Generic suspend userspace interface for Alchemy development boards.
  * This code exports a few sysfs nodes under /sys/power/db1x/ which
  * can be used by userspace to en/disable all au1x-provided wakeup
- * sources and configure the timeout after which the the TOYMATCH2 irq
+ * sources and configure the timeout after which the TOYMATCH2 irq
  * is to trigger a wakeup.
  */