summaryrefslogtreecommitdiff
path: root/arch/mips/ath25
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/ath25')
-rw-r--r--arch/mips/ath25/Kconfig4
-rw-r--r--arch/mips/ath25/Makefile2
-rw-r--r--arch/mips/ath25/ar5312.c155
-rw-r--r--arch/mips/ath25/ar5312.h16
-rw-r--r--arch/mips/ath25/ar5312_regs.h201
-rw-r--r--arch/mips/ath25/board.c8
6 files changed, 386 insertions, 0 deletions
diff --git a/arch/mips/ath25/Kconfig b/arch/mips/ath25/Kconfig
new file mode 100644
index 000000000000..cf933ea38044
--- /dev/null
+++ b/arch/mips/ath25/Kconfig
@@ -0,0 +1,4 @@
+config SOC_AR5312
+ bool "Atheros AR5312/AR2312+ SoC support"
+ depends on ATH25
+ default y
diff --git a/arch/mips/ath25/Makefile b/arch/mips/ath25/Makefile
index 9199fa1508d2..3361619caa9b 100644
--- a/arch/mips/ath25/Makefile
+++ b/arch/mips/ath25/Makefile
@@ -9,3 +9,5 @@
#
obj-y += board.o prom.o devices.o
+
+obj-$(CONFIG_SOC_AR5312) += ar5312.o
diff --git a/arch/mips/ath25/ar5312.c b/arch/mips/ath25/ar5312.c
new file mode 100644
index 000000000000..c2adaf2cd73a
--- /dev/null
+++ b/arch/mips/ath25/ar5312.c
@@ -0,0 +1,155 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com>
+ */
+
+/*
+ * Platform devices for Atheros AR5312 SoCs
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+
+#include "devices.h"
+#include "ar5312.h"
+#include "ar5312_regs.h"
+
+static void __iomem *ar5312_rst_base;
+
+static inline u32 ar5312_rst_reg_read(u32 reg)
+{
+ return __raw_readl(ar5312_rst_base + reg);
+}
+
+static inline void ar5312_rst_reg_write(u32 reg, u32 val)
+{
+ __raw_writel(val, ar5312_rst_base + reg);
+}
+
+static inline void ar5312_rst_reg_mask(u32 reg, u32 mask, u32 val)
+{
+ u32 ret = ar5312_rst_reg_read(reg);
+
+ ret &= ~mask;
+ ret |= val;
+ ar5312_rst_reg_write(reg, ret);
+}
+
+static void ar5312_restart(char *command)
+{
+ /* reset the system */
+ local_irq_disable();
+ while (1)
+ ar5312_rst_reg_write(AR5312_RESET, AR5312_RESET_SYSTEM);
+}
+
+/*
+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
+ * to determine the predevisor value.
+ */
+static unsigned clockctl1_predivide_table[4] __initdata = { 1, 2, 4, 5 };
+
+static unsigned __init ar5312_cpu_frequency(void)
+{
+ u32 scratch, devid, clock_ctl1;
+ u32 predivide_mask, multiplier_mask, doubler_mask;
+ unsigned predivide_shift, multiplier_shift;
+ unsigned predivide_select, predivisor, multiplier;
+
+ /* Trust the bootrom's idea of cpu frequency. */
+ scratch = ar5312_rst_reg_read(AR5312_SCRATCH);
+ if (scratch)
+ return scratch;
+
+ devid = ar5312_rst_reg_read(AR5312_REV);
+ devid = (devid & AR5312_REV_MAJ) >> AR5312_REV_MAJ_S;
+ if (devid == AR5312_REV_MAJ_AR2313) {
+ predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK;
+ predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT;
+ multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK;
+ multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT;
+ doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK;
+ } else { /* AR5312 and AR2312 */
+ predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK;
+ predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT;
+ multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK;
+ multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT;
+ doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK;
+ }
+
+ /*
+ * Clocking is derived from a fixed 40MHz input clock.
+ *
+ * cpu_freq = input_clock * MULT (where MULT is PLL multiplier)
+ * sys_freq = cpu_freq / 4 (used for APB clock, serial,
+ * flash, Timer, Watchdog Timer)
+ *
+ * cnt_freq = cpu_freq / 2 (use for CPU count/compare)
+ *
+ * So, for example, with a PLL multiplier of 5, we have
+ *
+ * cpu_freq = 200MHz
+ * sys_freq = 50MHz
+ * cnt_freq = 100MHz
+ *
+ * We compute the CPU frequency, based on PLL settings.
+ */
+
+ clock_ctl1 = ar5312_rst_reg_read(AR5312_CLOCKCTL1);
+ predivide_select = (clock_ctl1 & predivide_mask) >> predivide_shift;
+ predivisor = clockctl1_predivide_table[predivide_select];
+ multiplier = (clock_ctl1 & multiplier_mask) >> multiplier_shift;
+
+ if (clock_ctl1 & doubler_mask)
+ multiplier <<= 1;
+
+ return (40000000 / predivisor) * multiplier;
+}
+
+static inline unsigned ar5312_sys_frequency(void)
+{
+ return ar5312_cpu_frequency() / 4;
+}
+
+void __init ar5312_plat_time_init(void)
+{
+ mips_hpt_frequency = ar5312_cpu_frequency() / 2;
+}
+
+void __init ar5312_plat_mem_setup(void)
+{
+ void __iomem *sdram_base;
+ u32 memsize, memcfg, bank0_ac, bank1_ac;
+
+ /* Detect memory size */
+ sdram_base = ioremap_nocache(AR5312_SDRAMCTL_BASE,
+ AR5312_SDRAMCTL_SIZE);
+ memcfg = __raw_readl(sdram_base + AR5312_MEM_CFG1);
+ bank0_ac = ATH25_REG_MS(memcfg, AR5312_MEM_CFG1_AC0);
+ bank1_ac = ATH25_REG_MS(memcfg, AR5312_MEM_CFG1_AC1);
+ memsize = (bank0_ac ? (1 << (bank0_ac + 1)) : 0) +
+ (bank1_ac ? (1 << (bank1_ac + 1)) : 0);
+ memsize <<= 20;
+ add_memory_region(0, memsize, BOOT_MEM_RAM);
+ iounmap(sdram_base);
+
+ ar5312_rst_base = ioremap_nocache(AR5312_RST_BASE, AR5312_RST_SIZE);
+
+ /* Clear any lingering AHB errors */
+ ar5312_rst_reg_read(AR5312_PROCADDR);
+ ar5312_rst_reg_read(AR5312_DMAADDR);
+ ar5312_rst_reg_write(AR5312_WDT_CTRL, AR5312_WDT_CTRL_IGNORE);
+
+ _machine_restart = ar5312_restart;
+}
diff --git a/arch/mips/ath25/ar5312.h b/arch/mips/ath25/ar5312.h
new file mode 100644
index 000000000000..9e1e56e24eed
--- /dev/null
+++ b/arch/mips/ath25/ar5312.h
@@ -0,0 +1,16 @@
+#ifndef __AR5312_H
+#define __AR5312_H
+
+#ifdef CONFIG_SOC_AR5312
+
+void ar5312_plat_time_init(void);
+void ar5312_plat_mem_setup(void);
+
+#else
+
+static inline void ar5312_plat_time_init(void) {}
+static inline void ar5312_plat_mem_setup(void) {}
+
+#endif
+
+#endif /* __AR5312_H */
diff --git a/arch/mips/ath25/ar5312_regs.h b/arch/mips/ath25/ar5312_regs.h
new file mode 100644
index 000000000000..ff1201119be0
--- /dev/null
+++ b/arch/mips/ath25/ar5312_regs.h
@@ -0,0 +1,201 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+#ifndef __ASM_MACH_ATH25_AR5312_REGS_H
+#define __ASM_MACH_ATH25_AR5312_REGS_H
+
+/*
+ * Address Map
+ *
+ * The AR5312 supports 2 enet MACS, even though many reference boards only
+ * actually use 1 of them (i.e. Only MAC 0 is actually connected to an enet
+ * PHY or PHY switch. The AR2312 supports 1 enet MAC.
+ */
+#define AR5312_WLAN0_BASE 0x18000000
+#define AR5312_ENET0_BASE 0x18100000
+#define AR5312_ENET1_BASE 0x18200000
+#define AR5312_SDRAMCTL_BASE 0x18300000
+#define AR5312_SDRAMCTL_SIZE 0x00000010
+#define AR5312_FLASHCTL_BASE 0x18400000
+#define AR5312_FLASHCTL_SIZE 0x00000010
+#define AR5312_WLAN1_BASE 0x18500000
+#define AR5312_UART0_BASE 0x1c000000 /* UART MMR */
+#define AR5312_GPIO_BASE 0x1c002000
+#define AR5312_GPIO_SIZE 0x00000010
+#define AR5312_RST_BASE 0x1c003000
+#define AR5312_RST_SIZE 0x00000100
+#define AR5312_FLASH_BASE 0x1e000000
+#define AR5312_FLASH_SIZE 0x00800000
+
+/*
+ * Need these defines to determine true number of ethernet MACs
+ */
+#define AR5312_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */
+#define AR5312_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
+#define AR5312_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */
+
+/* Reset/Timer Block Address Map */
+#define AR5312_TIMER 0x0000 /* countdown timer */
+#define AR5312_RELOAD 0x0004 /* timer reload value */
+#define AR5312_WDT_CTRL 0x0008 /* watchdog cntrl */
+#define AR5312_WDT_TIMER 0x000c /* watchdog timer */
+#define AR5312_ISR 0x0010 /* Intr Status Reg */
+#define AR5312_IMR 0x0014 /* Intr Mask Reg */
+#define AR5312_RESET 0x0020
+#define AR5312_CLOCKCTL1 0x0064
+#define AR5312_SCRATCH 0x006c
+#define AR5312_PROCADDR 0x0070
+#define AR5312_PROC1 0x0074
+#define AR5312_DMAADDR 0x0078
+#define AR5312_DMA1 0x007c
+#define AR5312_ENABLE 0x0080 /* interface enb */
+#define AR5312_REV 0x0090 /* revision */
+
+/* AR5312_WDT_CTRL register bit field definitions */
+#define AR5312_WDT_CTRL_IGNORE 0x00000000 /* ignore expiration */
+#define AR5312_WDT_CTRL_NMI 0x00000001
+#define AR5312_WDT_CTRL_RESET 0x00000002
+
+/* AR5312_ISR register bit field definitions */
+#define AR5312_ISR_TIMER 0x00000001
+#define AR5312_ISR_AHBPROC 0x00000002
+#define AR5312_ISR_AHBDMA 0x00000004
+#define AR5312_ISR_GPIO 0x00000008
+#define AR5312_ISR_UART0 0x00000010
+#define AR5312_ISR_UART0DMA 0x00000020
+#define AR5312_ISR_WD 0x00000040
+#define AR5312_ISR_LOCAL 0x00000080
+
+/* AR5312_RESET register bit field definitions */
+#define AR5312_RESET_SYSTEM 0x00000001 /* cold reset full system */
+#define AR5312_RESET_PROC 0x00000002 /* cold reset MIPS core */
+#define AR5312_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC/BB */
+#define AR5312_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */
+#define AR5312_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */
+#define AR5312_RESET_ENET0 0x00000020 /* cold reset ENET0 MAC */
+#define AR5312_RESET_ENET1 0x00000040 /* cold reset ENET1 MAC */
+#define AR5312_RESET_UART0 0x00000100 /* cold reset UART0 */
+#define AR5312_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */
+#define AR5312_RESET_APB 0x00000400 /* cold reset APB ar5312 */
+#define AR5312_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */
+#define AR5312_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */
+#define AR5312_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BB */
+#define AR5312_RESET_NMI 0x00010000 /* send an NMI to the CPU */
+#define AR5312_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 MAC */
+#define AR5312_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 BB */
+#define AR5312_RESET_LOCAL_BUS 0x00080000 /* reset local bus */
+#define AR5312_RESET_WDOG 0x00100000 /* last reset was a wdt */
+
+#define AR5312_RESET_WMAC0_BITS (AR5312_RESET_WLAN0 |\
+ AR5312_RESET_WARM_WLAN0_MAC |\
+ AR5312_RESET_WARM_WLAN0_BB)
+
+#define AR5312_RESET_WMAC1_BITS (AR5312_RESET_WLAN1 |\
+ AR5312_RESET_WARM_WLAN1_MAC |\
+ AR5312_RESET_WARM_WLAN1_BB)
+
+/* AR5312_CLOCKCTL1 register bit field definitions */
+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
+
+/* Valid for AR5312 and AR2312 */
+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
+
+/* Valid for AR2313 */
+#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000
+#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12
+#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000
+#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16
+#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000
+
+/* AR5312_ENABLE register bit field definitions */
+#define AR5312_ENABLE_WLAN0 0x00000001
+#define AR5312_ENABLE_ENET0 0x00000002
+#define AR5312_ENABLE_ENET1 0x00000004
+#define AR5312_ENABLE_UART_AND_WLAN1_PIO 0x00000008/* UART & WLAN1 PIO */
+#define AR5312_ENABLE_WLAN1_DMA 0x00000010/* WLAN1 DMAs */
+#define AR5312_ENABLE_WLAN1 (AR5312_ENABLE_UART_AND_WLAN1_PIO |\
+ AR5312_ENABLE_WLAN1_DMA)
+
+/* AR5312_REV register bit field definitions */
+#define AR5312_REV_WMAC_MAJ 0x0000f000
+#define AR5312_REV_WMAC_MAJ_S 12
+#define AR5312_REV_WMAC_MIN 0x00000f00
+#define AR5312_REV_WMAC_MIN_S 8
+#define AR5312_REV_MAJ 0x000000f0
+#define AR5312_REV_MAJ_S 4
+#define AR5312_REV_MIN 0x0000000f
+#define AR5312_REV_MIN_S 0
+#define AR5312_REV_CHIP (AR5312_REV_MAJ|AR5312_REV_MIN)
+
+/* Major revision numbers, bits 7..4 of Revision ID register */
+#define AR5312_REV_MAJ_AR5312 0x4
+#define AR5312_REV_MAJ_AR2313 0x5
+
+/* Minor revision numbers, bits 3..0 of Revision ID register */
+#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */
+#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */
+
+/*
+ * ARM Flash Controller -- 3 flash banks with either x8 or x16 devices
+ */
+#define AR5312_FLASHCTL0 0x0000
+#define AR5312_FLASHCTL1 0x0004
+#define AR5312_FLASHCTL2 0x0008
+
+/* AR5312_FLASHCTL register bit field definitions */
+#define AR5312_FLASHCTL_IDCY 0x0000000f /* Idle cycle turnaround time */
+#define AR5312_FLASHCTL_IDCY_S 0
+#define AR5312_FLASHCTL_WST1 0x000003e0 /* Wait state 1 */
+#define AR5312_FLASHCTL_WST1_S 5
+#define AR5312_FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */
+#define AR5312_FLASHCTL_WST2 0x0000f800 /* Wait state 2 */
+#define AR5312_FLASHCTL_WST2_S 11
+#define AR5312_FLASHCTL_AC 0x00070000 /* Flash addr check (added) */
+#define AR5312_FLASHCTL_AC_S 16
+#define AR5312_FLASHCTL_AC_128K 0x00000000
+#define AR5312_FLASHCTL_AC_256K 0x00010000
+#define AR5312_FLASHCTL_AC_512K 0x00020000
+#define AR5312_FLASHCTL_AC_1M 0x00030000
+#define AR5312_FLASHCTL_AC_2M 0x00040000
+#define AR5312_FLASHCTL_AC_4M 0x00050000
+#define AR5312_FLASHCTL_AC_8M 0x00060000
+#define AR5312_FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */
+#define AR5312_FLASHCTL_E 0x00080000 /* Flash bank enable (added) */
+#define AR5312_FLASHCTL_BUSERR 0x01000000 /* Bus transfer error flag */
+#define AR5312_FLASHCTL_WPERR 0x02000000 /* Write protect error flag */
+#define AR5312_FLASHCTL_WP 0x04000000 /* Write protect */
+#define AR5312_FLASHCTL_BM 0x08000000 /* Burst mode */
+#define AR5312_FLASHCTL_MW 0x30000000 /* Mem width */
+#define AR5312_FLASHCTL_MW8 0x00000000 /* Mem width x8 */
+#define AR5312_FLASHCTL_MW16 0x10000000 /* Mem width x16 */
+#define AR5312_FLASHCTL_MW32 0x20000000 /* Mem width x32 (not supp) */
+#define AR5312_FLASHCTL_ATNR 0x00000000 /* Access == no retry */
+#define AR5312_FLASHCTL_ATR 0x80000000 /* Access == retry every */
+#define AR5312_FLASHCTL_ATR4 0xc0000000 /* Access == retry every 4 */
+
+/*
+ * ARM SDRAM Controller -- just enough to determine memory size
+ */
+#define AR5312_MEM_CFG1 0x0004
+
+#define AR5312_MEM_CFG1_AC0_M 0x00000700 /* bank 0: SDRAM addr check */
+#define AR5312_MEM_CFG1_AC0_S 8
+#define AR5312_MEM_CFG1_AC1_M 0x00007000 /* bank 1: SDRAM addr check */
+#define AR5312_MEM_CFG1_AC1_S 12
+
+#endif /* __ASM_MACH_ATH25_AR5312_REGS_H */
diff --git a/arch/mips/ath25/board.c b/arch/mips/ath25/board.c
index dd70327fd801..03baeceb3e35 100644
--- a/arch/mips/ath25/board.c
+++ b/arch/mips/ath25/board.c
@@ -16,6 +16,9 @@
#include <asm/bootinfo.h>
#include <asm/time.h>
+#include "devices.h"
+#include "ar5312.h"
+
static void ath25_halt(void)
{
local_irq_disable();
@@ -27,6 +30,9 @@ void __init plat_mem_setup(void)
_machine_halt = ath25_halt;
pm_power_off = ath25_halt;
+ if (is_ar5312())
+ ar5312_plat_mem_setup();
+
/* Disable data watchpoints */
write_c0_watchlo0(0);
}
@@ -37,6 +43,8 @@ asmlinkage void plat_irq_dispatch(void)
void __init plat_time_init(void)
{
+ if (is_ar5312())
+ ar5312_plat_time_init();
}
unsigned int __cpuinit get_c0_compare_int(void)