diff options
Diffstat (limited to 'arch/mips/boot/dts/qca/ar9331.dtsi')
| -rw-r--r-- | arch/mips/boot/dts/qca/ar9331.dtsi | 122 |
1 files changed, 120 insertions, 2 deletions
diff --git a/arch/mips/boot/dts/qca/ar9331.dtsi b/arch/mips/boot/dts/qca/ar9331.dtsi index 5cfc9d347826..768ac0f869b1 100644 --- a/arch/mips/boot/dts/qca/ar9331.dtsi +++ b/arch/mips/boot/dts/qca/ar9331.dtsi @@ -59,7 +59,7 @@ #qca,ddr-wb-channel-cells = <1>; }; - uart: uart@18020000 { + uart: serial@18020000 { compatible = "qca,ar9330-uart"; reg = <0x18020000 0x14>; @@ -126,6 +126,9 @@ clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>; clock-names = "eth", "mdio"; + phy-mode = "mii"; + phy-handle = <&phy_port4>; + status = "disabled"; }; @@ -133,13 +136,128 @@ compatible = "qca,ar9330-eth"; reg = <0x1a000000 0x200>; interrupts = <5>; - resets = <&rst 13>, <&rst 23>; reset-names = "mac", "mdio"; clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>; clock-names = "eth", "mdio"; + phy-mode = "gmii"; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch10: switch@10 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "qca,ar9331-switch"; + reg = <0x10>; + resets = <&rst 8>; + reset-names = "switch"; + + interrupt-parent = <&miscintc>; + interrupts = <12>; + + interrupt-controller; + #interrupt-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + switch_port0: port@0 { + reg = <0x0>; + ethernet = <ð1>; + + phy-mode = "gmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + + switch_port1: port@1 { + reg = <0x1>; + phy-handle = <&phy_port0>; + phy-mode = "internal"; + + status = "disabled"; + }; + + switch_port2: port@2 { + reg = <0x2>; + phy-handle = <&phy_port1>; + phy-mode = "internal"; + + status = "disabled"; + }; + + switch_port3: port@3 { + reg = <0x3>; + phy-handle = <&phy_port2>; + phy-mode = "internal"; + + status = "disabled"; + }; + + switch_port4: port@4 { + reg = <0x4>; + phy-handle = <&phy_port3>; + phy-mode = "internal"; + + status = "disabled"; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&switch10>; + + phy_port0: phy@0 { + reg = <0x0>; + interrupts = <0>; + status = "disabled"; + }; + + phy_port1: phy@1 { + reg = <0x1>; + interrupts = <0>; + status = "disabled"; + }; + + phy_port2: phy@2 { + reg = <0x2>; + interrupts = <0>; + status = "disabled"; + }; + + phy_port3: phy@3 { + reg = <0x3>; + interrupts = <0>; + status = "disabled"; + }; + + phy_port4: phy@4 { + reg = <0x4>; + interrupts = <0>; + status = "disabled"; + }; + }; + }; + }; }; usb: usb@1b000100 { |